Nuclear regulation and safety

International Nuclear Information System (INIS)

Hendrie, J.M.

1982-01-01

Nuclear regulation and safety are discussed from the standpoint of a hypothetical country that is in the process of introducing a nuclear power industry and setting up a regulatory system. The national policy is assumed to be in favor of nuclear power. The regulators will have responsibility for economic, reliable electric production as well as for safety. Reactor safety is divided into three parts: shut it down, keep it covered, take out the afterheat. Emergency plans also have to be provided. Ways of keeping the core covered with water are discussed

Order no. 53/71 of 3 February 1971 - Approval of the General Regulations on Health and Safety at Work in Industrial Establishments

International Nuclear Information System (INIS)

1971-01-01

This Order approves the General Regulations for Health and Safety at Work in Industrial Establishments. Section V which concerns ionizing radiations lays down that radiation protection measures currently in force must be observed in all premises where radioactive substances are stored, handled or used and where devices producing ionizing radiations are operated. (NEA) [fr

Nuclear safety regulation in the People's Republic of China

International Nuclear Information System (INIS)

Shi Guangchang

1987-01-01

The present report gives a general view of how the problem of nuclear safety is dealt with in China, with particular reference to the nuclear power plants. The most relevant nuclear legal regulations and procedures are reported. Organization of the National Nuclear Safety Administration (NNSA) of China and its working activities are presented. The report gives also the principle and practice with regard to licensing process and regulatory inspection of nuclear power plant in China. (author)

Safety goals and safety culture opening plenary. 2. Safety Regulation Implemented by Gosatomnadzor of Russia

International Nuclear Information System (INIS)

Gutsalov, A.T.; Bukrinsky, A.M.

2001-01-01

This paper describes principles and approaches used by Gosatomnadzor of Russia in establishing safety goals. The link between safety goals and safety culture is demonstrated. The paper also contains information on nuclear regulatory activities in Russia. Regulatory documents of Gosatomnadzor of Russia do not provide precise definitions of safety goals as IAEA documents INSAG-3 or INSAG-12 do. However, overall activities of Gosatomnadzor of Russia are directed to the achievement of these safety goals, as Gosatomnadzor of Russia is a federal executive authority responsible for the regulation of nuclear and radiation safety in accordance with the Russian Federal Law 'On the Use of Nuclear Energy'. Thus, in the Statement of the Policy of the Russian Regulatory Authority, enacted in 1992, it was established that the overall activities of Gosatomnadzor of Russia are directed to the achievement of the main goal. This goal is to establish conditions that ensure that personnel, the public, and the environment are protected from unacceptable radiation and nonproliferation of nuclear materials. The practical application of such a method as given by the publication of Statements of Policy of Gosatomnadzor of Russia may be considered as a safety culture element. 'General Provisions of NPP Safety Ensuring' (OPB-88/ 97) is a regulatory document of the highest level in the hierarchy of regulatory documents of Gosatomnadzor of Russia. It establishes quantitative values of safety goals as do the foregoing IAEA documents. Thus, this regulatory document sets up the following: 1. The estimated total probability of severe accidents should not exceed 10 5 /reactor.yr. 2. The estimated probability of the worst possible radioactive release to the environment specified in the standards should not exceed 10 -7 /reactor.yr in the case of severe beyond-design-basis accidents. 3. The probability of a reactor vessel failure should not exceed 10 -7 /reactor.yr. The foregoing values are somehow

A comparison of some Mexican/U.S. safety regulations

Energy Technology Data Exchange (ETDEWEB)

Bunner, W.R. [Training Associates, Columbus, OH (United States)

1994-12-31

In the US, safety and hygiene began to be enforced broadly with the formation of the US Department of Labor`s, Occupational Safety and Health Administration (OSHA) in 1970. In Mexico, the 1917 Constitution required companies to protect their workers against safety and hygiene hazards in the workplace. Additional requirements were added with the Federal Labor Law of 1931. General safety and hygiene regulations were added in 1934. Modern-day federal labor law in Mexico requires the creation of mixed safety and hygiene commissions in all industries. However, only about 114,000 workplaces have registered mixed commissions. In a similar vein, the most favored OSHA reform bill in the US proposes to require safety and health committees in all work places. At this time such committees are common in larger companies but not in smaller ones.

Technical regulations on the general design and safety criteria for design and construction of nuclear reactors of May 1975

International Nuclear Information System (INIS)

1975-05-01

These Technical Regulations published on 5th September 1975 were made in implementation of Section 33 of Decree No 7/9141 on the procedure for the licensing of nuclear installations. They serve as a guide to licensing authorities, project designers and operators in the nuclear field and therefore provide general criteria for safety standards, engineering codes, siting considerations, design bases for overall environmental radiation protection, and also deal with reactor core design, instrumentation, control, alarm systems, including an emergency core cooling system. Finally, the safe design of fuel elements must be ensured and fuel storage and handling techniques complied with. (NEA) [fr

Discussion about risk-informed regulations on the nuclear safety

International Nuclear Information System (INIS)

Gu Yeyi

2008-01-01

The article introduces the background and status quo of regulations on the nuclear safety in China, and points out the inadequacies existing with the current regulations. The author explains the risk-informed safety management concerning its development, status quo, and achievements made, in an attempt to make out the trend of improving regulations on the nuclear safety through risk-informed methods. Combining the U.S. development program of establishing risk-informed regulations on the nuclear safety, the author narrates principles and features of the new regulations system, and provides suggestions for the promotion of risk-informed safety management and establishment of risk-informed regulations on the nuclear safety. (author)

Development in France of nuclear safety technical regulations and standards used in the licensing procedure

International Nuclear Information System (INIS)

Lebouleux, P.

1983-04-01

Initially, the Commissariat a l'Energie Atomique was the overall structure which encompassed all nuclear activities in France, including those connected with radiological protection and nuclear safety. As other partners appeared, the Authorities have laid down national regulations relative to nuclear installations since 1963. These regulations more particularly provide for the addition of prescriptions with which the applicant must comply to obtain the necessary licenses and the establishment of General Technical Regulations pertaining to nuclear safety. The technical regulation related to nuclear safety in France is made of a set of regulation texts, of a different nature, that define the requirements for the construction, commissioning and operation of nuclear facilities. Simultaneously, the safety authorities (Service Central de Surete des Installations Nucleaires: SCSIN) issue recommendations or guides which are not strictly speaking regulations in the juridical sense; they are called ''Regles Fondamentales de Surete'' (RFS). The RFS set up and detail the conditions, the respect of which is deemed to be complying with the French regulation practice, for the subject to which they relate. Their purpose is to make known rules judged acceptable by safety authorities, thus making the safety review easier. A RFS, or a letter, can also give the result of the examination of the constructor and operator codes (RCC) by safety authorities

FOOD SAFETY REGULATIONS BASED ON REAL SCIENCE

Directory of Open Access Journals (Sweden)

Huub LELIEVELD

2015-10-01

Full Text Available Differences in regulations result in needless destruction of safe food and hamper food trade. The differences are not just the result of the history of food safety regulations, often developed in times before global cooperation, but are also built in new regulations. It may be responses to media hypes or for other reasons, but in most cases the differences cannot be justified scientifically. A major difficulty is that, due to the developments in analytical techniques the number of chemicals that are found in food is increasing rapidly and chemicals are always suspected to be a safety risk. By far most chemicals are of natural origin but could not be detected in the past because the methods available in the past were not sensitive enough. Demanding the absence of chemicals because the risk they present is unknown, however, would eventually make all food unacceptable. The general public should be shown that everything they eat is chemical, and all food components will be toxic if the amount is too high. It should also be shown that many of these chemicals will also cause illness and death if there is not enough of it as is the case with vitamins and minerals.

White paper on nuclear safety in 2009

International Nuclear Information System (INIS)

2009-06-01

It deals with a general introduction of nuclear safety like general safety, safety regulation and system law and standard. It indicates of nuclear energy facility safety about general safety, safety regulation of operating nuclear power plant safety regulation under constructing nuclear power plant. It deals with radiation facility safety, monitoring of environmental radiation, radiation protection, radiation control, international cooperating on nuclear energy safety and establishment of safety regulation.

TIS General Safety Group Annual Report 2000

CERN Document Server

Weingarten, W

2001-01-01

This report summarises the main activities of the General Safety (GS) Group of the Technical Inspection and Safety Division (TIS) during the year 2000, and the results obtained. The different topics in which the Group is active are covered: general safety inspections and ergonomy, electrical, chemistry and gas safety, chemical pollution containment and control, industrial hygiene, the safety of civil engineering works and outside contractors, fire prevention and the safety aspects of the LHC experiments.

Assessment of safety regulation using an artificial society

International Nuclear Information System (INIS)

Furuta, Kazuo; Nagase, Masaya

2005-01-01

This study proposes using an artificial society to assess impacts of safety regulation on the society. The artificial society used in this study is a multi-agent system, which consists of many agents representing companies. The agents cannot survive unless they get profits by producing some products. Safety regulation functions as the business environment, which the agents will evolve to fit to. We modeled this process of survival and adaptation by the genetic algorithm. Using the proposed model, case simulations were performed to compare various regulation styles, and some interesting insights were obtained how regulation style influences behavior of the agents and then productivity and safety level of the industry. In conclusion, an effective method for assessment of safety regulation has been developed, and then several insights were shown in this study

Proposed general amendments to the atomic energy control regulations

International Nuclear Information System (INIS)

1986-01-01

Canada's Atomic Energy Control Act defines the powers and responsibilities of the Atomic Energy Control Board (AECB). Among these is to make regulations to control the development, application and use of atomic energy. In these proposed general amendments to the Atomic Energy Control Regulations substantial changes are proposed in the designation of the authority of AECB staff, exemptions from licensing, international safeguards, duties of licensees and atomic radiation workers, security of information, and provision for hearings. The scope of the control of atomic energy has been redefined as relating to matters of health, safety, security, international safeguards, and the protection of the environment

Nuclear safety regulations in the Republic of Croatia

International Nuclear Information System (INIS)

Cizmek, A.; Horvatic, M.; Ilijas, B.; Medakovic, S.

2009-01-01

also lays down the manner in which nuclear material records are kept, the procedure for notifying the state administration body competent for nuclear safety by the nuclear material user, and the keeping of registers of nuclear activities, nuclear material and special equipment by the state administration body competent for nuclear safety, as well as the form and content of official nuclear safety inspector identification card and badge. Ordinance on conditions for nuclear safety and protection with regard to the sitting, design, construction, use and decommissioning of a facility in which a nuclear activity is performed regulates nuclear safety and protection general and specific conditions for sitting, design, construction, use and decommissioning of a facility in which a nuclear activity is performed. In the presentation the special accent will be given to the new Ordinances, adopted in 2008.(author)

Managing for safety and safety culture within the UK nuclear industry. A regulator's perspective

International Nuclear Information System (INIS)

Tyrer, M.J.

2002-01-01

This paper outlines the basis of the legal system for the regulation of health and safety at work within the United Kingdom (UK), and in particular, the regulation of the nuclear industry. The framework, formulated by the regulator, which has been published as a practical guide for directors, managers, health and safety professionals and employee representatives for the successful management of health and safety is explained. This guidance, however, concentrates, to a large extent, on management systems and only addresses in part the types of issues, such as behaviours, values, attitudes and beliefs which contribute to the safety culture of an organization. The regulator of the UK nuclear industry has considered research, and other work, carried out by several organizations in this area, notably the Advisory Committee on the Safety of Nuclear Installations (ACSNI) and the International Atomic Energy Agency (IAEA), and produced its own framework for managing for safety at nuclear installations. As a regulator, the Health and Safety Executive (HSE), and its inspectorate responsible for regulation of the nuclear industry, HM Nuclear Installations Inspectorate (HMNII), are not the appropriate organization to assess the safety culture of an organization, but positively encourage organizations to both carry out this assessment themselves and to monitor their performance. To this end, HSE has developed, and made available, the Health and Safety Climate Tool which is aimed at providing organizations with information which can be used as part of a continuous improvement process. (author)

Toward introduction of risk informed safety regulation. Nuclear Safety Commission taskforce's interim report

International Nuclear Information System (INIS)

2006-01-01

Nuclear Safety Commission's taskforce on 'Introduction of Safety Regulation Utilizing Risk Information' completed the interim report on its future subjects and directions in December 2005. Although current safety regulatory activities have been based on deterministic approach, this report shows the risk informed approach is expected to be very useful for making nuclear safety regulation and assurance activities reasonable and also for appropriate allocation of regulatory resources. For introduction of risk informed regulation, it also recommends pileups of experiences with gradual introduction and trial of the risk informed approach, improvement of plant maintenance rules and regulatory requirements utilizing risk information, and establishment of framework to assure quality of risk evaluation. (T. Tanaka)

Integrating environmental management into food safety and food packaging in Malaysia: review of the food regulation 1985

Science.gov (United States)

Nordin, N. H.; Hara, H.; Kaida, N.

2017-05-01

Food safety is an important issue that is related to public safety to prevent the toxicity threats of the food. Management through legal approach has been used in Malaysia as one of the predominant approaches to manage the environment. In this regard, the Food Regulation 1985 has been one of the mechanisms of environmental management through legal approach in controlling the safety of packaged food in food packaging industry in Malaysia. The present study aims to analyse and to explain the implementation of the Food Regulation 1985 in controlling the safety of packaged food in Malaysia and to integrate the concept of environmental management into the food safety issue. Qualitative analysis on the regulation document revealed that there are two main themes, general and specific, while their seven sub themes are included harmful packages, safety packages, reuse packages, polyvinyl chloride (PVC), alcoholic bottle, toys, money and others and iron powder. The implementation of the Food Regulation 1985 in controlling the safety of packaged food should not be regarded solely for regulation purposes but should be further developed for a broader sense of food safety from overcoming the food poisoning.

Safety practice and regulations in different IGORR member countries

International Nuclear Information System (INIS)

Hickman, C.; Minguet, J.L.; Arnould, F.

1999-01-01

In the suggestions of the 1996 IGORR 5 conference, Technicatome proposed 'Comparing Regulations for Research Reactors in Participating Countries'. The aim was to enhance and facilitate the dissemination of pertinent information amongst potential utilities of operational research reactors. A questionnaire on the following topics was subsequently sent out to IGORR 5 participants : Procedures for Research Reactors and Associated Equipment, Safety Analysis, Safety Related Components, Radiation Protection and Management of Nuclear materials. The objective of the present paper is to identify major trends, similarities and differences in the approaches adopted by different countries. Its scope has been limited to: Licensing and Regulatory approach; Operating and Safety documents; Safety Analysis; Radiological Safety; Management of Nuclear Materials. The investigations carried out indicate that to a large extent international recommendations (IAEA, ICPR,..) are being followed and that there is a general tendency to integrate them into national legislation and regulations. Although Safety Culture varies from one country to another an overall general consensus exists on the basic approach to safety inasmuch as: different countries have their own legally defined Safety Authorities, a Preliminary Safety Report is required before a research reactor can be built, and a final Safety Report before the core can be loaded with nuclear fuel and the reactor made critical; these documents must be accepted by the Safety Authorities concerned; a combination of defense-in-depth strategy (deterministic approach) and probabilistic analysis is applied; three or more safety classes are used to categorize systems and components; the single failure criterion is taken into consideration for systems and components having safety functions; both Operating Basis and Safety Shutdown type earthquakes are considered; the crashing of an aircraft onto a research reactor is taken into consideration

Regulations of 19 August 1978 on the optional principles of the Nuclear Safety Committee

International Nuclear Information System (INIS)

1978-01-01

These regulations were published in the Turkish Official Gazette of 19 August 1978 and were made pursuant to Decree no. 7/9141 of 1975 on licensing of nuclear installations which established the Nuclear Safety Committee. They determine the duties and responsibilities of the Committee, its qualifications, its operating principles and its relations with the Nuclear Safety Assistance Service set up in the Turkish Atomic Energy Commission for the purposes of assisting its Secretary General. The regulations also lay down the procedures to be applied for consultations on granting licences. (NEA) [fr

49 CFR 238.229 - Safety appliances-general.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Safety appliances-general. 238.229 Section 238.229... Equipment § 238.229 Safety appliances—general. (a) Except as provided in this part, all passenger equipment continues to be subject to the safety appliance requirements contained in Federal statute at 49 U.S.C...

The safety and regulation of natural products used as foods and food ingredients.

Science.gov (United States)

Abdel-Rahman, Ali; Anyangwe, Njwen; Carlacci, Louis; Casper, Steve; Danam, Rebecca P; Enongene, Evaristus; Erives, Gladys; Fabricant, Daniel; Gudi, Ramadevi; Hilmas, Corey J; Hines, Fred; Howard, Paul; Levy, Dan; Lin, Ying; Moore, Robert J; Pfeiler, Erika; Thurmond, T Scott; Turujman, Saleh; Walker, Nigel J

2011-10-01

The use of botanicals and dietary supplements derived from natural substances as an adjunct to an improved quality of life or for their purported medical benefits has become increasingly common in the United States. This review addresses the safety assessment and regulation of food products containing these substances by the U.S. Food and Drug Administration (FDA). The issue of safety is particularly critical given how little information is available on the toxicity of some of these products. The first section uses case studies for stevia and green tea extracts as examples of how FDA evaluates the safety of botanical and herbal products submitted for consideration as Generally Recognized as Safe under the Federal Food, Drug, and Cosmetics Act. The 1994 Dietary Supplement Health Education Act (DSHEA) created a regulatory framework for dietary supplements. The article also discusses the regulation of this class of dietary supplements under DSHEA and addresses the FDA experience in analyzing the safety of natural ingredients described in pre-market safety submissions. Lastly, we discuss an ongoing interagency collaboration to conduct safety testing of nominated dietary supplements.

Fire safety regulations and licensing

International Nuclear Information System (INIS)

Berg, H.P.

1998-01-01

Experience of the past tow decades of nuclear power plant operation and results obtained from modern analytical techniques confirm that fires may be a real threat to nuclear safety and should receive adequate attention from the design phase throughout the life of the plant. Fire events, in particular influence significantly plant safety due to the fact that fires have the potential to simultaneously damage components of redundant safety-related equipment. Hence, the importance of fire protection for the overall safety of a nuclear power plant has to be reflected by the fire safety regulations and to be checked during the licensing process of a plant as well as during the continuous supervision of the operating plant

Improving the rationality of nuclear safety regulations

International Nuclear Information System (INIS)

Choi, Byung Sun; Choi, Y. G.; Mun, G. H.

2005-03-01

This study focuses on human nature and institutions around the risk management in Korean Nuclear Installations. Nuclear safety regulatory system in Korea has had a tendency to overvalue the technical or engineering areas. But just like other risk management system, the knowledge of social science is also required to design more valid safety regulatory system. As a result of analysis, this study suggest that performance regulation need to be introduced to current nuclear safety regulation system. In this advanced regulatory system, each nuclear generation unit have to be evaluated by performance of its own regulatory implementation and would be treated differently by the performance. Additionally, self-regulation could be very effective was to guarantee nuclear safety. Because KHNP could be judged to have an considerable capabilities to manage its own regulatory procedures. To make self-regulatory system established successfully, it is also important to arrange the appropriate incentive and compensate structures

AREVA General Inspectorate Annual Report 2013 - Status of safety in nuclear facilities

International Nuclear Information System (INIS)

Oursel, Luc; Riou, Jean

2014-06-01

This annual report by AREVA's General Inspectorate deals with the status of nuclear safety and radiation protection in the group's facilities and operations over the course of 2013. Based on the findings made during implementation of the annual inspection program, this annual report also includes the results of the analysis of significant events and the observations and assessments of specialists in the Safety Health Security Sustainable Development Department (SHSSDD), supplemented by regular interaction with the safety regulators, different government agencies, stakeholders and other nuclear operators. Additionally, this report presents the action plans put into motion and the directions taken for continuous improvement in risk prevention for operations conducted in France and internationally. In 2013, the level of safety in the group's nuclear facilities and operations remained satisfactory, although improvements are necessary in some domains. This report is based on established indicators, analyses of reported events, responses to commitments made to the regulators, and the results of different improvement actions reported on in the inspected and supported entities. In 2013, no level 2 event on the International Nuclear and Radiological Event Scale (INES) was reported, the bottom-up reporting of weak signals was confirmed, dose levels were low and there were no radiological impacts on the environment. The General Inspectorate conducted 45 inspections in 30 of the group's entities in 2013. Of these, 10 concerned sites outside France and 7 were conducted following events or particular situations. These inspections gave rise to 176 recommendations, which the inspected entities have translated into action plans. Verification of these different action plans according to planned procedures and announced schedules gave rise to 16 follow-up inspections. The major lessons learned from these inspections relate to project management, facility compliance and operational

International Nuclear Officials Discuss IAEA Peer Reviews of Nuclear Safety Regulations

International Nuclear Information System (INIS)

2011-01-01

Board of Governors meeting in November. ''The strong support expressed by senior regulators for the IAEA peer reviews of the nuclear regulatory framework and their concrete proposals for improvement will contribute significantly to the effective implementation of the IAEA Nuclear Safety Action Plan,'' said Denis Flory, IAEA Deputy Director General for Nuclear Safety and Security. ''There was a general recognition that these peer reviews provide national nuclear regulators with an objective view of their strengths and weaknesses and contribute to the continuous strengthening of nuclear safety.'' Background IRRS missions are designed to strengthen and enhance the effectiveness of the national nuclear regulatory infrastructure of States, while recognizing the ultimate responsibility of each State to ensure safety in this area. The reviews are invited by individual Member States, who undergo a rigorous self-assessment in advance of the mission. In accordance with the approved IAEA Nuclear Safety Action Plan the host nations are encouraged to invite a follow-up mission within 3 years. Nineteen nations have hosted IRRS reviews since the service became available in 2006, and there have been two lessons-learned workshops, in 2007 and 2008. The IRRS reviews consider regulatory, technical and policy issues, with comparisons against IAEA Safety Standards and, where appropriate, good practices elsewhere. During an IRRS mission, recommendations and suggestions are offered to the host country. Recommendations are related to items of direct relevance to safety as referenced in IAEA Safety Requirements, while suggestions relate to items not essential to compliance with international standards, but which might enhance the effectiveness of the national nuclear and radiation safety regime and/or improve the organization or performance of the regulatory body. Commendable good practices may be identified and documented for consideration by other States. (IAEA)

Basic concept on safety regulation for land disposal of low level radioactive solid wastes

International Nuclear Information System (INIS)

1985-01-01

As to the land disposal of low level radioactive solid wastes, to which the countermeasures have become the urgent problem at present, it is considered to be a realistic method to finally store the solid wastes concentratedly outside the sites of nuclear power stations and others, and effort has been exerted by those concerned to realize it. Besides, as for extremely low level radioactive solid wastes, the measures of disposing them corresponding to the radioactivity level are necessary, and the concrete method has been examined. The Committee on Safety Regulation for Radioactive Wastes has discussed the safety regulation for those since April, 1984, and the basic concept on the safety regulation was worked up. It is expected that the safety of the land disposal of low level radioactive solid wastes can be ensured when the safety regulation is carried out in conformity with this basic concept. The present status of the countermeasures to the land disposal of low level radioactive solid wastes is shown. As the concrete method, the disposal in shallow strate has been generally adopted. At present, the plan for the final storage in Aomori Prefecture is considered, and it will be started with the first stage of four-stage control. (Kako, I.)

The General Safety Group Annual Report 2001/2002

CERN Document Server

Weingarten, W

2003-01-01

This report summarizes the main activities of the General Safety (GS) Group of the Technical Inspection and Safety Division during 2001 and 2002, and the results obtained. The different topics in which the group is active are covered: general safety inspections and ergonomics, electrical, chemical and gas safety, chemical pollution containment and control, industrial hygiene, the safety of civil engineering works and outside contractors, fire prevention and the safety aspects of the LHC experiments.

Economic consideration of nuclear safety and cost benefit analysis in nuclear safety regulation

International Nuclear Information System (INIS)

Choi, Y. S.; Choi, K. S.; Choi, K. W.; Song, I. J.; Park, D. K.

2001-01-01

For the optimization of nuclear safety regulation, understanding of economic aspects of it becomes increasingly important together with the technical approach used so far to secure nuclear safety. Relevant economic theories on private and public goods were reviewed to re-illuminate nuclear safety from the economic perspective. The characteristics of nuclear safety as a public good was reviewed and discussed in comparison with the car safety as a private safety good. It was shown that the change of social welfare resulted from the policy change induced can be calculated by the summation of compensating variation(CV) of individuals. It was shown that the value of nuclear safety could be determined in monetary term by this approach. The theoretical background and history of cost benefit analysis of nuclear safety regulation were presented and topics for future study were suggested

Radiation Safety (Qualifications) Regulations 1980

International Nuclear Information System (INIS)

1980-01-01

These Regulations, promulgated pursuant to the provisions of the Radiation Safety Act, 1975-1979, require persons engaged in activities involving radiation to pass a radiation safety examination or to possess an approved qualification in radiation. The National Health and Medical Research Council is authorised to exempt persons from compliance with these requirements or, conversely, to impose such requirements on persons other than those designated. (NEA) [fr

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Book cover Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Directeur(s) : Veena Jha. Maison(s) d'édition : Edward Elgar, IDRC. 1 janvier 2006. ISBN : 184542512X. 250 pages. e-ISBN : 155250185X.

Nuclear Installation Safety: General Observations and Trends from IAEA Peer Reviews

International Nuclear Information System (INIS)

Rzentkowski, G.

2016-01-01

The Safety Review Services (SRSs) for nuclear installations address the needs of Member States at all stages of installations’ lifecycle. SRSs are based on the IAEA Safety Standards and are provided on Member States’ request to peer review national regulatory frameworks and safety provisions for nuclear installations. They result in recommendations and suggestions to improve national regulations and operational safety, and serve to exert peer pressure to ensure that that every Member State with nuclear installations recognizes its safety responsibility and the need to comply with the IAEA Safety Standards. This presentation provides an overview of SRSs for Nuclear Installations, including their structure and main subject areas. The presentation also summarizes general findings and trends which clearly demonstrate that there is continuous improvement in regulation of nuclear installations and in safety of their operation. Nevertheless, there is the need to further enhance the efficiency and effectiveness of SRSs through review of the overall governance model and service delivery to better serve the needs of Member States. The presentation points out some areas of improvements which have already been implemented or are being considered for implementation. Just as important, SRSs are conducted by teams of experts from around the world to strengthening international cooperation, ensure diversity and impartiality, and improve the overall quality of the safety review being conducted. The review team members are also provided with the opportunity for mutual learning and sharing good practices among themselves and with the Member State undergoing the review. As a result, SRAs play an important role in a quest to harmonize regulatory requirements and approaches globally. (author)

48 CFR 245.7311-2 - Safety, security, and fire regulations.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Safety, security, and fire regulations. 245.7311-2 Section 245.7311-2 Federal Acquisition Regulations System DEFENSE ACQUISITION... Inventory 245.7311-2 Safety, security, and fire regulations. ...

AREVA General Inspectorate 2010 Annual Report. Status of safety in nuclear facilities

International Nuclear Information System (INIS)

2010-01-01

After messages by different managers, this report proposes a description of the context for nuclear safety: group's policy in matters of nuclear safety and radiation protection, regulatory changes (in France, with respect to information, changes in administrative organization, overhaul of general technical regulations, international context). It describes the organizational changes which occurred within the company. It reports actions regarding transparency, briefly describes actions and principles aimed at improving safety, indicates and comments noteworthy nuclear events, discusses their assessment from a HOF (human and organizational factors) perspective, comments lessons learned from inspections, comments data regarding radiation protection and actions aimed at improving radiation protection. It discusses environmental impact issues. It addresses the different processes and factors which transversely appear in nuclear safety: safety management, human and organizational factors, safety in design, project management, and emergency management. Several specific risks are discussed: criticality control, nuclear materials safeguards, fire, spill prevention, transportation, radioactive waste, shutdown and dismantling, service operations, mining, and environmental liabilities. Document in French and in English

General principles of nuclear safety management related to research reactor decommissioning

International Nuclear Information System (INIS)

Banciu, Ortenzia; Vladescu, Gabriela

2003-01-01

The paper contents the general principles applicable to the decommissioning of research reactors to ensure a proper nuclear safety management, during both decommissioning activities and post decommissioning period. The main objective of decommissioning is to ensure the protection of workers, population and environment against all radiological and non-radiological hazards that could result after a reactor shutdown and dismantling. In the same time, it is necessary, by some proper provisions, to limit the effect of decommissioning for the future generation, according to the new Romanian, IAEA and EU Norms and Regulations. Assurance of nuclear safety during decommissioning process involves, in the first step, to establish of some safety principles and requirements to be taken into account during whole process. In the same time, it is necessary to perform a series of analyses to ensure that the whole process is conducted in a planned and safe manner. The general principles proposed for a proper management of safety during research reactor decommissioning are as follows: - Set-up of all operations included in a Decommissioning Plan; - Set-up and qualitative evaluation of safety problems, which could appear during normal decommissioning process, both radiological and nonradiological risks for workers and public; - Set-up of accident list related to decommissioning process the events that could appear both due to some abnormal working conditions and to some on-site and off-site events like fires, explosions, flooding, earthquake, etc.); - Development and qualitative/ quantitative evaluation of scenarios for each incidents; - Development (and evaluation) of safety indicator system. The safety indicators are the most important tools used to assess the level of nuclear safety during decommissioning process, to discover the weak points and to establish safety measures. The paper contains also, a safety case evaluation (description of facility according to the decommissioning

Converting the GSR part3 into a national regulations for the protection and safety of radiation sources

International Nuclear Information System (INIS)

Hatim, Abdulrahman

2016-04-01

The achievement and maintenance of a high level of Radiation Protection and Safety of Radiation Sources depends on a sound legal and governmental infrastructure, including a regulatory body with well-defined responsibilities and functions. The project aimed at converting the IAEA GRS Part 3 into National regulations in Sudan for the protection against the harmful effects of ionizing radiation and safety of radiation sources. The regulations developed covered general requirements for radiation protection, verification of safety, planned exposure situations, emergency exposure situations and existing exposure situation. The Government of Sudan is expected to empower the Sudanese Nuclear Radiological Regulatory Authority (SNRAA) and other relevant authorities to undertake the conversion of IAEA GSR Part 3 into national regulations to be used to regulate all facilities and activities in Sudan. (au)

New Safety rules

CERN Multimedia

Safety Commission

2008-01-01

The revision of CERN Safety rules is in progress and the following new Safety rules have been issued on 15-04-2008: Safety Procedure SP-R1 Establishing, Updating and Publishing CERN Safety rules: http://cern.ch/safety-rules/SP-R1.htm; Safety Regulation SR-S Smoking at CERN: http://cern.ch/safety-rules/SR-S.htm; Safety Regulation SR-M Mechanical Equipment: http://cern.ch/safety-rules/SR-M.htm; General Safety Instruction GSI-M1 Standard Lifting Equipment: http://cern.ch/safety-rules/GSI-M1.htm; General Safety Instruction GSI-M2 Standard Pressure Equipment: http://cern.ch/safety-rules/GSI-M2.htm; General Safety Instruction GSI-M3 Special Mechanical Equipment: http://cern.ch/safety-rules/GSI-M3.htm. These documents apply to all persons under the Director General’s authority. All Safety rules are available at the web page: http://www.cern.ch/safety-rules The Safety Commission

The role of the nuclear safety regulator

International Nuclear Information System (INIS)

Mellado, I.

2007-01-01

The Consejo de Seguridad Nuclear (CSN), or Nuclear Safety Council, is the only Spanish institution qualified in nuclear safety and radiological protection. Created in 1980, the CSN is independent of the Central State Administration, and possesses its own legal standing, estate and resources acquired directly from tax revenues. The CSN proposes regulations and advises the government on subjects within its competence, including the criteria for siting nuclear facilities once the autonomous regions have been informed. The CSN is responsible for issuing mandatory and binding reports to the Ministry of Industry. Tourism and Commerce, and for inspections and evaluation of the facilities included within its realm of competence throughout their phases (construction, start-up, operating and decommissioning). It is also responsible for the radiological control and surveillance of workers, the general public and the environment, as described below. In 1999, a new responsibility was assigned to the CSN to perform studies, assessment and inspections in relation to all phases of radioactive waste and spent fuel management. The CSN reports to the Spanish Parliament and is not subject to the hierarchy or auspices of the Government or the organisations in charge of promoting nuclear energy. The Council itself is an Associative Body comprised of 5 members, appointed by Parliament for a 6 year term (these members cannot be removed). Under this Council is situated an extensive technical body. A General Secretary is seconded by Technical Directors in the area of Nuclear Safety and Radiological Protection. As well there are a R and D Office, an Inspection Office, and a Technical Standards Office. The CSN counts 446 workers, of which 191 are university graduate specialists in nuclear safety or radiological protection. The average age is 45 years. Ongoing training is provided in technical specialties and management. (author)

The politics of nuclear safety regulation

International Nuclear Information System (INIS)

Adam, G.

2002-01-01

The paper discusses political aspects of decision making about the safety of nuclear power plants especially in Eastern Europe and in connection with the enlargement of the European Union. The problem of the Kozloduy NPP safety is also discussed. Recommendations on the policy and tasks for nuclear regulators are given

CERN's new safety policy

CERN Multimedia

2014-01-01

The documents below, published on 29 September 2014 on the HSE website, together replace the document SAPOCO 42 as well as Safety Codes A1, A5, A9, A10, which are no longer in force. As from the publication date of these documents any reference made to the document SAPOCO 42 or to Safety Codes A1, A5, A9 and A10 in contractual documents or CERN rules and regulations shall be deemed to constitute a reference to the corresponding provisions of the documents listed below.   "The CERN Safety Policy" "Safety Regulation SR-SO - Responsibilities and organisational structure in matters of Safety at CERN" "General Safety Instruction GSI-SO-1 - Departmental Safety Officer (DSO)" "General Safety Instruction GSI-SO-2 - Territorial Safety Officer (TSO)" "General Safety Instruction GSI-SO-3 - Safety Linkperson (SLP)" "General Safety Instruction GSI-SO-4 - Large Experiment Group Leader In Matters of Safety (LEXGLI...

Development of NPP safety regulation in Russia

International Nuclear Information System (INIS)

Vishnevsky, Y.G.; Gutsalov, A.T.; Bukrinsky, A.M.; Gordon, B.G.

1999-01-01

The presentation describes the organisation scheme of Russian safety regulatory bodies, their tasks and responsibilities. Legislative and regulatory basis of NPP safety regulations rely on the federal laws: Law on the Use of Nuclear Energy and Law on Radiation Safety of the Population. Role of international cooperation and Improvement of regulatory activities in Russia are emphasised

Safety regulations for radioisotopes, etc. (interim report)

International Nuclear Information System (INIS)

1980-01-01

An (interim) report by an ad hoc expert committee to the Nuclear Safety Commission, on the safety regulations for radioisotopes, etc., was presented. For the utilization of radioisotopes, etc., there is the Law Concerning Prevention of Radiation Injury Due to Radioisotopes, etc. with the advances in this field and the improvement in international standards, the regulations by the law have been examined. After explaining the basic ideas of the regulations, the problems and countermeasures in the current regulations are described: legal system, rationalization in permission procedures and others, inspection on RI management, the system of the persons in charge of radiation handling, RI transport, low-level radioactive wastes, consumer goods, definitions of RIs, radiation and sealed sources, regulations by group partitioning, RI facilities, system of personnel exposure registration, entrusting of inspection, etc. to private firms, and reduction in the works for permission among governmental offices. (author)

Legislation for the countermeasures on special issues of nuclear safety regulations

International Nuclear Information System (INIS)

Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Hak Man; Oh, Ho Chul

2003-02-01

Since the present legal system on nuclear safety regulation has some problems that refer to contents of regulatory provisions, this mid-report has preformed research on the legal basic theory of nuclear safety regulation. And then secondly this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation. In order to interpret easily this report finally took the cases of judicial precedents on nuclear safety regulation in USA, Germany, Japan and Korea

Legislation for the countermeasures on special issues of nuclear safety regulations

Energy Technology Data Exchange (ETDEWEB)

Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Hak Man; Oh, Ho Chul [Chongju Univ., Cheongju (Korea, Republic of)

2003-02-15

Since the present legal system on nuclear safety regulation has some problems that refer to contents of regulatory provisions, this mid-report has preformed research on the legal basic theory of nuclear safety regulation. And then secondly this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation. In order to interpret easily this report finally took the cases of judicial precedents on nuclear safety regulation in USA, Germany, Japan and Korea.

On the Regulation of Life Safety Risk

DEFF Research Database (Denmark)

Faber, Michael Havbro; Sørensen, John Dalsgaard; Vrouwenvelder, A.C.W.M.

2015-01-01

. Starting point is taken in a short outline of what is considered to comprise the present best practice rationale for life safety and health risk regulation. Thereafter, based on selected principal examples from different application areas, inconsistencies in present best practice risk quantification...... absolute level of individual life safety risk subject to assessment of acceptability. It is highlighted that a major cause of inconsistency in risk quantifications and comparisons originates from the fact that present regulations partly address societal activities and partly address applied technologies...

Safety regulations: Implications of the new risk perspectives

International Nuclear Information System (INIS)

Aven, T.; Ylönen, M.

2016-01-01

The current safety regulations for industrial activities are to a large extent functionally oriented and risk-based (informed), expressing what to achieve rather than the means and solutions needed. They are founded on a probability-based perspective on risk, with the use of risk assessment, risk acceptance criteria and tolerability limits. In recent years several risk researchers have argued for the adoption of some new types of risk perspectives which highlight uncertainties rather than probabilities in the way risk is defined, the point being to better reflect the knowledge, and lack of knowledge, dimension of risk. The Norwegian Petroleum Safety Authority has recently implemented such a perspective. The new ISO standard 31000 is based on a similar thinking. In this paper we discuss the implications of these perspectives on safety regulation, using the oil & gas and nuclear industries as illustrations. Several suggestions for how to develop the current safety regulations in line with the ideas of the new risk perspectives are outlined, including some related to the use of risk acceptance criteria (tolerability limits). We also point to potential obstacles and incentives that the larger societal and institutional setting may impose on industry as regards the adoption of the new risk perspectives. - Highlights: • Some new types of risk perspectives have been promoted. • They have been implemented for example by the Norwegian Petroleum Safety Authority. • The paper studies the implication of these perspectives on the risk regulation. • Suggestions for how to develop the regulations are provided • Obstacles and incentives for the implementation of the perspectives are pointed to.

NEA activities in safety and regulation

International Nuclear Information System (INIS)

Stadie, K.B.

1983-01-01

The NEA programme on Safety and Regulations is briefly reviewed. It encompasses four main areas - nuclear safety technology; nuclear licensing; radiation protection; and waste management - with three principal objectives: to promote exchanges of technical information in order to enlarge the data base for national decision making; to improve co-ordination of national R and D activities with emphasis on international standard problem exercises, and to promote international projects; to develop common technical, administrative and legal approaches to improve compatibility of safety and regulatory practices

Development of Comprehensive Nuclear Safety Regulation Plan for 2007-2011

International Nuclear Information System (INIS)

Choi, Young Sung; Kim, Woong Sik; Park, Dong Keuk; Kim, Ho Ki

2006-01-01

The Article 8-2 of Atomic Energy Act requires the government to establish Atomic Energy Promotion Plan every five years. It sets out national nuclear energy policies in a systematic and consistent way. The plan presents the goals and basic directions of national nuclear energy policies on the basis of current status and prospects. Both areas of utilization and safety management of nuclear energy are included and various projects and schedules are delineated based on the national policy directions. The safety management area in this plan deals with the overall safety and regulation policy. Its detail projects and schedule should be developed in separate plans by responsible ministries under the mediation of the MOST. As a regulatory authority, MOST is responsible for safety management area and its technical support organization, KINS has developed Comprehensive Nuclear Safety Regulation Plan as an implementation plan of safety area. This paper presents the development process and specific projects contained in the Comprehensive Nuclear Safety Regulation Plan which is under development now

78 FR 11092 - Safety and Health Regulations for Construction

Science.gov (United States)

2013-02-15

... LABOR DEPARTMENT Occupational Safety and Health Administration 29 CFR Part 1926 Safety and Health Regulations for Construction CFR Correction In Title 29 of the Code of Federal Regulations, Part 1926, revised as of July 1, 2012, on page 225, in Sec. 1926.152, paragraph (c)(16) is added to read as follows: Sec...

The UK system for regulating the long-term safety of radioactive waste disposal

International Nuclear Information System (INIS)

Duncan, A.

1997-01-01

The general system is described for regulation of disposal of solid, long-lived radioactive wastes. The relevant Government policy is outlined, and the framework of legislation and arrangements for implementation, the associated guidance produced by regulatory bodies and the approach to assessment by regulators of a safety case for radioactive waste disposal are reported. Also, for the purposes of discussion in the Workshop, some of the practical issues are considered which are still in development in the UK in regard to regulatory methodology. (author)

Facilities management and industrial safety

International Nuclear Information System (INIS)

2003-06-01

This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

Review of Policy Documents for Nuclear Safety and Regulation

International Nuclear Information System (INIS)

Kim, Woong Sik; Choi, Kwang Sik; Choi, Young Sung; Kim, Hho Jung; Kim, Ho Ki

2006-01-01

The goal of regulation is to protect public health and safety as well as environment from radiological hazards that may occur as a result of the use of atomic energy. In September 1994, the Korean government issued the Nuclear Safety Policy Statement (NSPS) to establish policy goals of maintaining and achieving high-level of nuclear safety and also help the public understand the national policy and a strong will of the government toward nuclear safety. It declares the importance of establishing safety culture in nuclear community and also specifies five nuclear regulatory principles (Independence, Openness, Clarity, Efficiency and Reliability) and provides the eleven regulatory policy directions. In 2001, the Nuclear Safety Charter was declared to make the highest goal of safety in driving nuclear business clearer; to encourage atomic energy- related institutions and workers to keep in mind the mission and responsibility for assuring safety; to guarantee public confidence in related organizations. The Ministry of Science and Technology (MOST) also issues Yearly Regulatory Policy Directions at the beginning of every year. Recently, the third Atomic Energy Promotion Plan (2007-2011) has been established. It becomes necessary for the relevant organizations to prepare the detailed plans on such areas as nuclear development, safety management, regulation, etc. This paper introduces a multi-level structure of nuclear safety and regulation policy documents in Korea and presents some improvements necessary for better application of the policies

Review of Policy Documents for Nuclear Safety and Regulation

Energy Technology Data Exchange (ETDEWEB)

Kim, Woong Sik; Choi, Kwang Sik; Choi, Young Sung; Kim, Hho Jung; Kim, Ho Ki [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of)

2006-07-01

The goal of regulation is to protect public health and safety as well as environment from radiological hazards that may occur as a result of the use of atomic energy. In September 1994, the Korean government issued the Nuclear Safety Policy Statement (NSPS) to establish policy goals of maintaining and achieving high-level of nuclear safety and also help the public understand the national policy and a strong will of the government toward nuclear safety. It declares the importance of establishing safety culture in nuclear community and also specifies five nuclear regulatory principles (Independence, Openness, Clarity, Efficiency and Reliability) and provides the eleven regulatory policy directions. In 2001, the Nuclear Safety Charter was declared to make the highest goal of safety in driving nuclear business clearer; to encourage atomic energy- related institutions and workers to keep in mind the mission and responsibility for assuring safety; to guarantee public confidence in related organizations. The Ministry of Science and Technology (MOST) also issues Yearly Regulatory Policy Directions at the beginning of every year. Recently, the third Atomic Energy Promotion Plan (2007-2011) has been established. It becomes necessary for the relevant organizations to prepare the detailed plans on such areas as nuclear development, safety management, regulation, etc. This paper introduces a multi-level structure of nuclear safety and regulation policy documents in Korea and presents some improvements necessary for better application of the policies.

Implementation of the new regulation on radiological safety in Peru

International Nuclear Information System (INIS)

Medina Gironzini, E.

1997-01-01

Since its creation in 1975, the Peruvian Institute of Nuclear Energy (IPEN) has enacted three regulations of national importance on the norms of protection against ionizing radiation. The first regulation, which is called regulation of radiological protection (1980) approved by a resolution of IPEN, is the result of the work of a committee constituted by IPEN and the Ministry of Health. Its implementation caused some problems as result of which, in 1989, a new regulation on radiological protection was enacted through a supreme decree. Taking into account the new recommendation of the International Commission on Radiological Protection and the International Basic Safety Standard for Protection against Ionizing Radiation and for the Safety of Radiation Sources, approved in May 1997, the regulation of radiological safety also considers evolving aspects in the Project ARCAL XVII/IAEA. This regulation includes various topics such as exclusions, requirements of protection (medical exposure, occupational exposure, public exposure, chronic exposure), requirements of source safety, interventions and emergencies, control of sources and practices (exemptions, authorizations, inspections) etc. The implementation of this regulation at the national level falls to IPEN, the unique authority commissioned to control nuclear installations, radioactivity and x ray facilities in medicine, industry and research

Education and Training of Safety Regulation for Nuclear Safety Infrastructure: Its Necessity and Unique Features

International Nuclear Information System (INIS)

Choi, Young Sung; Choi, Young Joon; Lee, Jae Cheon

2009-01-01

Faced with global warming and electricity demands, countries over the world recognize the comparative advantages of nuclear energy. It is estimated that about 300 nuclear power plants (NPPs) expect to be constructed until 2030 worldwide. In addition, according to the IAEA, approximately 20 new countries might have their first NPP in operation by 2030 in the high projection compared with bout 5 new countries in the low projection. When introducing nuclear power, the implementation of an appropriate infrastructure to address all of the relevant issues is a central concern of international community. In particular, nuclear power program requires, at an earlier stage than when construction starts, the development of a legal and regulatory framework and training of regulators and safety experts whose combined knowledge adequately covers all areas of nuclear safety and regulation applied at a NPP construction and operation. As an essential component of such human resource development, special attention was paid to the provision of education and training to regulators of which countries plan to introduce NPPs. In term of education theory, safety regulation has some unique features in learning and teaching, which are different from those of nuclear engineering or development. This paper overviews nuclear safety infrastructure, explores the roles of exporting countries, and presents features and components in education of nuclear safety regulation

Legislation for the countermeasures on special issues of nuclear safety regulations

International Nuclear Information System (INIS)

Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Heon Jin; Oh, Ho Chul

2004-02-01

Since the present nuclear safety regulation has some legal problems that refer to special issues and contents of regulatory provisions, this report has preformed research on the legal basic theory of nuclear safety regulation to solve the problems. In addition, this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation

Legislation for the countermeasures on special issues of nuclear safety regulations

Energy Technology Data Exchange (ETDEWEB)

Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Heon Jin; Oh, Ho Chul [Chongju Univ., Cheongju (Korea, Republic of)

2004-02-15

Since the present nuclear safety regulation has some legal problems that refer to special issues and contents of regulatory provisions, this report has preformed research on the legal basic theory of nuclear safety regulation to solve the problems. In addition, this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation.

The general technical regulation and the standardization

International Nuclear Information System (INIS)

Laverie, Michel; Houze, Christian; Lebouleux, Philippe

1980-01-01

Through a certain number of procedures, the thorough appreciation of the safety of a nuclear installation relies more on a specific appreciation taking into account the references as a whole, than on a technical regulation which claims to cover all the problems. Nevertheless, a French technical regulation structure regarding the safety domain must be built up progressively. The authors consider the principles of such a structure, and together they make the inventory of the works, finished, in progress or contemplated. The description of this specifically French approach emphazises the multiple and complementary forms given to statutory implements [fr

Leadership for Safety in Practice: Perspectives from a Nuclear Regulator

International Nuclear Information System (INIS)

Tyobeka, B. M.

2016-01-01

The principal responsibility for a nuclear regulator is to assure compliance with regulations and safety standards by operators. One of these requirements is demonstration of, and adherence to, nuclear safety culture by the operators. At the same time, the regulators themselves are expected to live the talk and practice what they preach, i.e., demonstrate highest levels of nuclear safety culture within their organizations. Consequently, it is recognised that leadership is important in the creation of a culture that supports and promotes a strong nuclear safety performance of an organization. The leaders of a regulatory body are vital in inspiring employees to a higher level of safety and productivity, which means that they must apply good leadership attributes on a daily basis. This paper will attempt to bring forth and share attributes for strong leadership role in promoting a safety culture within a nuclear regulatory body by surveying world-wide practices and examples in developing and advanced nuclear countries. (author)

Cryogenic Safety Rules and Guidelines at CERN

CERN Multimedia

CERN. Geneva

2016-01-01

CERN defines and implements a Safety Policy that sets out the general principles governing safety at CERN. As an intergovernmental organisation, CERN further establishes its own Safety Rules as necessary for its proper functioning. In this process, it takes into account the laws and regulation of the Host States (France and Switzerland), EU regulations and directives, as well as international regulations, standards and directives. For the safety of cryogenic equipment, this is primarily covered by the Safety Regulation for Mechanical Equipment and the General Safety Instruction for Cryogenic Equipment. In addition, CERN has also developed Safety Guidelines to support the implementation of these safety rules, covering cryogenic equipment and oxygen deficiency hazard assessment and mitigation. An overview of the cryogenic safety rules and these safety guidelines will be presented.

Relationship between general safety requirements and safety culture in the improvement of safe operation of I.N.R. TRIGA reactor facilities

International Nuclear Information System (INIS)

Ciocanescu, M.; Preda, M.; Chiritescu, M.; Dumitru, M.

1996-01-01

Acquiring of the basic principles of ''safety culture'' by a large number of profesionals in the nuclear field drew the attention of the decision factors in the INR managerial structure, who decided to promote certain practical actions at each level in order to improve nuclear safety. Starting from the ''Republican Standards for Nuclear Safety'' issued by CSEN in 1975, where general safety criteria are defined for nuclear reactors and NPPs, the specialists at the TRIGA reactor originated and implemented a coherent and secure system to ensure nuclear safety over all steps of nuclear activities: research, conception, execution, commissioning and operation. This system has been continuosly corrected so that now it is completely integrated in a modern safety system. The paper presents the way in which a modern system for nuclear safety at the TRIGA reactor has been implemented and developed, in accordance to specific criteria and requirements imposed by related National Regulations and with the principles of safety culture. Starting from the definition of specific responsabilities, there are presented the internal stipulations and practical actions at all levels in order to enhance nuclear safety. (orig.)

Aspects of the state safety regulation dealing with management of radioactive wastes from nuclear vessels

International Nuclear Information System (INIS)

Markarov, Valentin G.

1999-01-01

According to this presentation, the Constitution of the Russian Federation states that nuclear power engineering and fissile materials are under the jurisdiction of the Russian Federation. But there is no federal law with detailed directions for radioactive waste (RW) management, which thus comes under the Federal law ''On Use of Atomic Energy''. This law defines the legal basis and principles of regulating the relations occurring during RW management and sets some general requirements. RW management safety is regulated by the federal norms and rules (1) Radiation Safety Norms (NRB-96), Basic Sanitary Rules (OSP-72, 87) and (3) Sanitary Rules for RW Management (SPORO-85), etc. A number of normative documents on RW management will be put in force in 1999. For work in the field of RW management, licence must in general be obtained from Gozatomnazdor of Russia. The conditions for receiving a license for the management of RW from vessels are presented

Improving the regulation of safety at DOE nuclear facilities. Final report

International Nuclear Information System (INIS)

1995-12-01

The report strongly recommends that, with the end of the Cold War, safety and health at DOE facilities should be regulated by outside agencies rather than by DOE itself. The three major recommendations are: under any regulatory scheme, DOE must maintain a strong internal safety management system; essentially all aspects of safety at DOE's nuclear facilities should be externally regulated; and existing agencies rather than a new one should be responsible for external regulation

Nuclear safety: risks and regulation

International Nuclear Information System (INIS)

Wood, W.C.

1983-01-01

Taking a fresh look at nuclear safety regulations, this study finds that the mandate and organization of the Nuclear Regulatory Commission (NRC) militate against its making sound decisions. The author criticizes failures to make hard decisions on societal risk, to clarify responsibility, and to implement cost-effective safety measures. Among his recommendations are reorganization of the NRC under a single authoritative administrator, separation of technical issues from social ones, and reform of the Price-Anderson Act. The author concludes that the worst eventuality would be to continue the current state of indecision. 161 references, 6 figures, 4 tables

Domestic Regulation for Periodic Safety Review of Nuclear Power Plants

International Nuclear Information System (INIS)

Kim, Daesik; Ahn, Seunghoon; Auh, Geunsun; Lee, Jonghyeok

2015-01-01

The so-called Periodic Safety Review (PSR) has been carried out such safety assessment throughout its life, on a periodic basis. In January 2001, the Atomic Energy Act and related regulations were amended to adopt the PSR institutional scheme from IAEA Nuclear Safety Guide 50-SG-O12. At that time the safety assessment was made to review the plant safety on 10 safety factors, such as aging management and emergency planning, where the safety factor indicates the important aspects of safety of an operating NPP to be addressed in the PSR. According to this legislation, the domestic utility, the KHNP has conducted the PSR for the operating NPP of 10 years coming up from operating license date, starting since May 2000. Some revisions in the PSR rule were made to include the additional safety factors last year. This paper introduces the current status of the PSR review and regulation, in particular new safety factors and updated technical regulation. Comprehensive safety assessment for Korea Nuclear Power Plants have performed a reflecting design and procedure changes and considering the latest technology every 10 years. This paper also examined the PSR system changes in Korea. As of July 2015, reviews for PSR of 18 units have been completed, with 229 nuclear safety improvement items. And implementation have been completed for 165 of them. PSR system has been confirmed that it has contributed to improvement of plant safety. In addition, this paper examined the PSR system change in Korea

R and D perspectives on the advanced nuclear safety regulation system

International Nuclear Information System (INIS)

Lee, Chang Ju; Ahn, Sang Kyu; Park, Jong Seuk; Chung, Dae Wook; Han, Sang Hoon; Lee, Jung Won

2009-01-01

As current licensing process is much desired to be optimized both plant safety and regulatory efficiency, an advanced safety regulation such as risk informed regulation has been come out. Also, there is a need to have a future oriented safety regulation since a lot of new reactors are conceptualized. Keeping pace with these needs, since early 2007, Korean government has launched a new project for preparing an advanced and future oriented nuclear safety regulation system. In order to get practical achievements, the project team sets up such specific research objectives for the development of: implementation program for graded regulation using risk and performance information; multi purpose PSA models for regulatory uses; a technology neutral regulatory framework for future innovative reactors; evaluation procedure of proliferation resistance; and, performance based fire hazard analysis method and evaluation system. This paper introduces major R and D outputs of this project, and provides some perspectives for achieving effectiveness and efficiency of the nuclear regulation system in Korea

R and D perspectives on the advanced nuclear safety regulation system

Energy Technology Data Exchange (ETDEWEB)

Lee, Chang Ju; Ahn, Sang Kyu; Park, Jong Seuk; Chung, Dae Wook [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Han, Sang Hoon; Lee, Jung Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2009-04-15

As current licensing process is much desired to be optimized both plant safety and regulatory efficiency, an advanced safety regulation such as risk informed regulation has been come out. Also, there is a need to have a future oriented safety regulation since a lot of new reactors are conceptualized. Keeping pace with these needs, since early 2007, Korean government has launched a new project for preparing an advanced and future oriented nuclear safety regulation system. In order to get practical achievements, the project team sets up such specific research objectives for the development of: implementation program for graded regulation using risk and performance information; multi purpose PSA models for regulatory uses; a technology neutral regulatory framework for future innovative reactors; evaluation procedure of proliferation resistance; and, performance based fire hazard analysis method and evaluation system. This paper introduces major R and D outputs of this project, and provides some perspectives for achieving effectiveness and efficiency of the nuclear regulation system in Korea.

Decision of the Council of State on the general regulations for the safety of a disposal facility for reactor waste (398/91)

International Nuclear Information System (INIS)

1991-01-01

These Regulations contain provisions for the safe planning, construction and use of final radioactive waste storage facilities. Licensees with a waste management obligation are responsible for ensuring the safety of such facilities. The Regulations entered into force on 1 March 1991. (NEA)

Radiation Safety of Accelerator Facility with Regard to Regulation

International Nuclear Information System (INIS)

Dedi Sunaryadi; Gloria Doloresa

2003-01-01

The radiation safety of accelerator facility and the status of the facilities according to licensee in Indonesia as well as lesson learned from the accidents are described. The atomic energy Act No. 10 of 1997 enacted by the Government of Indonesia which is implemented in Radiation Safety Government Regulation No. 63 and 64 as well as practice-specific model regulation for licensing request are discussed. (author)

Legal principles of regulatory administration and nuclear safety regulation

Energy Technology Data Exchange (ETDEWEB)

Lee, Kyeong Hui; Cheong, Sang Kee [Hannam Univ., Taejon (Korea, Republic of)

2000-12-15

This research presents a critical analysis and evaluation of principles of administrative laws in order to provide framework of structural reform on the nuclear safety regulation system. The focus of this analysis and evaluation is centered around the area of origin of regulatory administrative laws; authorities of regulation; procedures of regulatory actions; regulatory enforcement; and administrative relief system. In chapter 2 the concept of regulatory administration is analysed. Chapter 3 identifies the origin of regulatory administration and the principles of administration laws. It also examines legal nature of the nuclear safety standard. In relation to regulatory authorities. Chapter 4 identifies role and responsibility of administration authorities and institutions. It also examines fundamental principles of delegation of power. Then the chapter discusses the nuclear safety regulation authorities and their roles and responsibilities. Chapter 5 classifies and examines regulatory administration actions. Chapter 6 evaluates enforcement measure for effectiveness of regulation. Finally, chapter 7 discusses the administrative relief system for reviewing unreasonable regulatory acts.

Offshore regulators focus on incentives for safety

Energy Technology Data Exchange (ETDEWEB)

Reid, W.

2000-11-27

Strict safety regulations in effect at offshore drilling sites are discussed. The guiding principle in all existing regulation is that while economic or industrial considerations are important, the value and the concern for human life is paramount. Should some tragic event occur at an offshore drilling site that is shown to have been caused by negligence of an operator, there is no question at all that the regulatory authority, in this case the Canada-Newfoundland Offshore Petroleum Board (CNOPB), would take the negligent operator to court. Nevertheless, Canadian authorities remain confident that encouragement of maintaining a safe working environment is likely to be more successful in ensuring workplace safety than threats of punishment. Indeed, Canadian regulators have, in recent times, shown a tendency to move towards performance-based systems, as opposed to the more usual prescriptive or rule-bound regulatory regime. This new approach involves setting targets and giving companies the responsibility to implement measures to reach the targets rather than relying on government instructions. Still, performance-based regulation in Canada is relatively new and some regulations remain prescriptive. Examples are the requirement for two immersion suits and two lifeboat seats for every worker on a drilling unit.

Safety culture in nuclear installations - The role of the regulator

International Nuclear Information System (INIS)

Karigi, Alice W.

2002-01-01

Safety culture is an amalgamation of values, standards, morals and norms of acceptable behavior by the licensees, Radiation workers and the Regulator. The role played by a Regulator in establishing safety culture in a nuclear installation is that related to Authorization, review, assessment, inspection and enforcement. The regulator is to follow the development of a facility or activity from initial selection of the site through design, construction, commissioning, radioactive waste management through to decommissioning and closure. He is to ensure safety measures are followed through out the operation of the facility by laying down in the license conditions of controlling construction of nuclear installations and ensuring competence of the operators. (author)

Safety evaluations required in the safety regulations for Monju and the validity confirmation of safety evaluation methods

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The purposes of this study are to perform the safety evaluations of the fast breeder reactor 'Monju' and to confirm the validity of the safety evaluation methods. In JFY 2012, the following results were obtained. As for the development of safety evaluation methods needed in the safety examination achieved for the reactor establishment permission, development of the analysis codes, such as a core damage analysis code, were carried out according to the plan. As for the development of the safety evaluation method needed for the risk informed safety regulation, the quantification technique of the event tree using the Continuous Markov chain Monte Carlo method (CMMC method) were studied. (author)

Improving the regulation of safety at DOE nuclear facilities. Final report: Appendices

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

The report strongly recommends that, with the end of the Cold War, safety and health at DOE facilities should be regulated by outside agencies rather than by any regulatory scheme, DOE must maintain a strong internal safety management system; essentially all aspects of safety at DOE`s nuclear facilities should be externally regulated; and existing agencies rather than a new one should be responsible for external regulation.

Improving the regulation of safety at DOE nuclear facilities. Final report: Appendices

International Nuclear Information System (INIS)

1995-12-01

The report strongly recommends that, with the end of the Cold War, safety and health at DOE facilities should be regulated by outside agencies rather than by any regulatory scheme, DOE must maintain a strong internal safety management system; essentially all aspects of safety at DOE's nuclear facilities should be externally regulated; and existing agencies rather than a new one should be responsible for external regulation

Impact of Construction Health & Safety Regulations on Project ...

African Journals Online (AJOL)

Impact of Construction Health & Safety Regulations on Project Parameters in Nigeria: Consultants and Contractors View. ... The study recommends that better attention is given to health and safety should as a project parameter and that related practice notes and guidelines should be evolved for all project stakeholders.

International Safety Regulation and Standards for Space Travel and Commerce

Science.gov (United States)

Pelton, J. N.; Jakhu, R.

The evolution of air travel has led to the adoption of the 1944 Chicago Convention that created the International Civil Aviation Organization (ICAO), headquartered in Montreal, Canada, and the propagation of aviation safety standards. Today, ICAO standardizes and harmonizes commercial air safety worldwide. Space travel and space safety are still at an early stage of development, and the adoption of international space safety standards and regulation still remains largely at the national level. This paper explores the international treaties and conventions that govern space travel, applications and exploration today and analyzes current efforts to create space safety standards and regulations at the national, regional and global level. Recent efforts to create a commercial space travel industry and to license commercial space ports are foreseen as means to hasten a space safety regulatory process.

Assessment of policy issues in nuclear safety regulation according to circumstantial changes

Energy Technology Data Exchange (ETDEWEB)

Chang, Soon Heung; Lee, Byong Ho; Baek, Won Pil; Lee, Kwang Gu; Huh, Gyun Young; Hahn, Young Tae [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

2000-03-15

The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. It is concluded that the Periodic Safety Review (PSR) should be implemented in Korea as soon as possible, in harmonization with the regulation for life extension of NPPs. The IAEA guidelines, including 10 year intervals and 11 safety factors, should be used as the basic guidelines. The approach to improve regulatory effectiveness is also reviewed and a transition to 'knowledge-based regulation' is suggested.

Assessment of policy issues in nuclear safety regulation according to circumstantial changes

Energy Technology Data Exchange (ETDEWEB)

Chang, Soon Heung; Chang, Soon Heung; Lee, Byong Ho; Baek, Won Pil; Roh, Chang Hyun; Lee, Kwang Gu; Kim, Hong Chae; Lee, Yong Ho [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1999-03-15

The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. It is concluded that the Periodic Safety Review (PSR) should be implemented in Korea as soon as possible, in harmonization with the regulation for life extension of NPPs. The IAEA guidelines, including 10 year intervals and 11 safety factors, should be used as the basic guidelines. Efforts are also required to cope with other circumstantial changes such as the establishment of International Nuclear Regulators Association (INRA)

Legal bases of safety regulations in electrical engineering

Energy Technology Data Exchange (ETDEWEB)

Jeiter, W

1981-12-01

Apart from the governmental regulations the rule for the prevention of accidents 'Electric plants and equipment' must be observed in order to protect the insurants. Actually, all these regulations do not contain any independent instructions. They rather utilize the VDE regulations and refer to them. The laws of electrical safety engineering are strongly influenced by harmonization efforts particularly within the European Communitties.

Pakistan nuclear safety and radiation protection regulation 1990

International Nuclear Information System (INIS)

1990-01-01

In this act regulations of nuclear safety and radiation protection in Pakistan has been explained. A legal and licensing procedure to handle protection of nuclear materials, processing storage of radioactive products has been described under this regulation. In these regulations full explanation of accidental exposure, delegation of powers and record keeping/waste disposal of radioactive has been given. (A.B.)

Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan

OpenAIRE

Ko, Wen-Hwa

2015-01-01

The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was cla...

The Swedish Nuclear Power Inspectorate's Regulations concerning Safety in connection with the Disposal of Nuclear Material and Nuclear Waste. General Recommendations concerning the Application of the Swedish Nuclear Power Inspectorate's Regulations above

International Nuclear Information System (INIS)

2002-06-01

An english translation of the original Swedish regulations concerning the safety in disposal of nuclear wastes is published in this booklet, together with recommendations on how these regulations can be applied

Safety Culture for Regulator Competence Management in Embarking States

International Nuclear Information System (INIS)

Kandil, M.

2016-01-01

Full text: Safety is based on preventive actions where the ability of a regulatory body to fulfill its responsibilities depends largely on the competence of its staff. Building employees’ skills and knowledge is an investment for each employee and in the future of the organization. This building must be the competence of its staff integration with their safety culture, the essential to ensure competent human resources as required in the IAEA safety standards and other documents, in which the need and importance of ensuring regulatory competence is emphasized. As it involves both operational and management issues, safety culture is a sensitive topic for regulators whose role is to ensure compliance with safety requirements and not to intervene in management decisions. A number of embarking States are aspiring to develop nuclear power generation and this means that, among other things, regulatory bodies have to be established and rapidly expanded. This paper reports major considerations on the integration of safety culture with an adequate competence management system for regulators in embarking states. (author

Investigation and consideration on the framework of oversight-based safety regulation. U.S. NRC 'Risk-Informed, Performance-Based' Regulation

International Nuclear Information System (INIS)

Saji, Gen

2001-01-01

Regulation on safety, environment and health in Japan has before today been intended to correspond with an accident at forms of reinforcement of national standards and monitoring, if any. However, as it was thought that such regulation reinforcement was afraid to bring some social rigidity, and to weaken independent responsibility, as a result, because of anxiety of losing peoples' merits inversely, some fundamental directivity such as respect of self-responsibility principle' and 'necessary and least limit of regulation' were selected as a part of political innovation. On the other hand, at a background of wide improvements on various indexing values showing operation results of nuclear power stations in U.S.A., private independent effort on upgrading of safety is told to largely affect at beginning of INPO (Institute of Nuclear Power Operations), without regulation reinforcement of NRC side. This is a proof of concrete effect of transfer to oversight-based safety regulation. Here were introduced on nuclear safety in U.S.A. at a base of some references obtained on entering the 'MIT summer specialist program. Nuclear system safety', on focussing at new safety regulation of NRC and its effect and so on, and adding some considerations based on some knowledge thereafter. (G.K.)

General safety orientations of the Jules Horowitz Reactor Project (JHRP)

International Nuclear Information System (INIS)

Tremodeux, P.; Fiorini, G.L.

2000-01-01

After a brief reminder of the JHR purpose, the document outlines the General Safety related Orientations/Recommendations used for the design and the safety assessment of the facility. As far as the JHR design is new, the safety philosophy adopted for this reactor will be as consistent as possible with that recommended for future (power...) reactors. The general recommendations developed in the paper are: the general nuclear safety approach for the design, operation and analysis with, in particular, the adoption of the Defence In Depth principle; the general safety objectives in terms of radiological consequences; the use of Probabilistic Safety Studies; quality assurance. The 'Defence in Depth' concept using amongst others the 'Barrier' principle remains the basis of the JHR safety. 'Defence In Depth' is applied both to design and operation. Its adequacy is checked during the safety assessment and the paper gives the technical recommendations that should allow the designer to implement this concept into the final design. Built mainly for experimental irradiation the JHR facilities will be handled according to conventional or new operation rules which could put materials under stress and entail handling errors. Specific recommendations are defined to take into account the corresponding peculiarities; they are discussed in the paper. The safety design of the JHR takes into account the experience accumulated through the CEA experimental irradiation programmes, which represents several dozen reactor years; the consultation of CEA reactor facilities operators is ongoing. The corresponding feedback is shortly described. Recommendations related to maintenance and associated operation are indicated as well as those regarding the human factor. Details are given on the JHR safety practical implementation through the CEA/DRN Safety approach. Details of the corresponding Safety Objectives are also discussed. Finally the designer position on the role of probabilistic safety

Who regulates food? Australians' perceptions of responsibility for food safety.

Science.gov (United States)

Henderson, Julie; Coveney, John; Ward, Paul

2010-01-01

Food scares have diminished trust in public institutions to guarantee food safety. Food governance after the food scare era is concerned with institutional independence and transparency leading to a hybrid of public and private sector management and to mechanisms for consumer involvement in food governance. This paper explores Australian consumers' perceptions of who is, and should be responsible for food safety. Forty-seven participants were interviewed as part of a larger study on trust in the food system. Participants associate food governance with government, industry, and the individual. While few participants can name the national food regulator, there is a strong belief that the government is responsible for regulating the quality and safety of food. Participants are wary of the role of the food industry in food safety, believing that profit motives will undermine effective food regulation. Personal responsibility for food safety practices was also identified. While there are fewer mechanisms for consumer involvement and transparency built into the food governance system, Australian consumers display considerable trust in government to protect food safety. There is little evidence of the politicisation of food, reflecting a level of trust in the Australian food governance system that may arise from a lack of exposure to major food scares.

Fusion safety regulations in the United States: Progress and trends

International Nuclear Information System (INIS)

DeLooper, J.

1994-01-01

This paper explores the issue of regulations as they apply to current and future fusion experimental machines. It addresses fusion regulatory issues, current regulations used for fusion, the Tokamak Fusion Test Reactor experience with regulations, and future regulations to achieve fusion's safety and environmental potential

A study in improvement of administrative system in the nuclear safety regulation

International Nuclear Information System (INIS)

Yook, Dong Il; Kuk, Doe Hyeong; Lee, Seong Min; Kim, Jong Sam; Hwang, Sun Ho

2001-03-01

One of the most important tasks to improve nuclear safety regulation system is to separate nuclear regulatory institutes from public agencies which promote the development nuclear power. Moreover, nuclear safety regulation should be not only specialized but optimized to be adapted for new environments such as high-tech information age. Especially, it is necessary to reform the current nuclear safety regulation systems both to be effective under the local self-administration which began to operate in recent years and to be supported by local residents

A study in improvement of administrative system in the nuclear safety regulation

Energy Technology Data Exchange (ETDEWEB)

Yook, Dong Il; Kuk, Doe Hyeong; Lee, Seong Min; Kim, Jong Sam; Hwang, Sun Ho [Chungnam National Univ., Taejon (Korea, Republic of)

2001-03-15

One of the most important tasks to improve nuclear safety regulation system is to separate nuclear regulatory institutes from public agencies which promote the development nuclear power. Moreover, nuclear safety regulation should be not only specialized but optimized to be adapted for new environments such as high-tech information age. Especially, it is necessary to reform the current nuclear safety regulation systems both to be effective under the local self-administration which began to operate in recent years and to be supported by local residents.

Safety Margins and Their Economical Value in a De-regulated Market

International Nuclear Information System (INIS)

Vidard, Michel

2002-01-01

The definition of safety margins is sometimes ambiguous. Depending on assumptions used to evaluate the evolution of plant parameters and on acceptance criteria, the same design could well turn out to have positive, zero, or negative margin for the same operating situation. Very often, considering that an optimized reactor would have to operate with zero margin compared to at least one safety criterion, designers or utilities considered in their analyses penalizing assumptions. This was done for example either considering reduced component capability or very high core peaking factors, the latter generally exceeding by far what would be anticipated in perturbed situations. This approach has three major drawbacks: -having a reasonable understanding of the real importance of safety margins is difficult, -if a non-conservatism is identified in a methodology, there is a high risk of being in a no-compliance situation from a regulatory standpoint, -it leads to a limitation on allowable electrical output and constraints on technical specifications for example. In a regulated market, such a situation can be tolerable as the final customer has to pay the extra financial burden in any case. In a de-regulated market, the situation is significantly different. The final customer can choose his supplier, and is likely to go to those offering the best prices, i.e. those making optimal use of their available resources. There is so a need for better understanding of real plant capabilities. Revisiting assumptions used for evaluating safety margins is so highly recommended, if not imperative, to electricity companies. This will helpful to reshape company strategies in case of evolution of market conditions. (author)

A Review of General Aviation Safety (1984-2017).

Science.gov (United States)

Boyd, Douglas D

2017-07-01

General aviation includes all civilian aviation apart from operations involving paid passenger transport. Unfortunately, this category of aviation holds a lackluster safety record, accounting for 94% of civil aviation fatalities. In 2014, of 1143 general aviation accidents, 20% were fatal compared with 0 of 29 airline mishaps in the United States. Herein, research findings over the past 30 yr will be reviewed. Accident risk factors (e.g., adverse weather, geographical region, post-impact fire, gender differences) will be discussed. The review will also summarize the development and implementation of stringent crashworthiness designs with multi-axis dynamic testing and head-injury protection and its impact on mitigating occupant injury severity. The benefits and drawbacks of new technology and human factor considerations associated with increased general aviation automation will be debated. Data on the safety of the aging general aviation population and increased drug usage will also be described. Finally, areas in which general aviation occupant survival could be improved and injury severity mitigated will be discussed with the view of equipping aircraft with 1) crash-resistant fuel tanks to reduce post-impact conflagration; 2) after-market ballistic parachutes for older aircraft; and 3) current generation electronic locator beacons to hasten site access by first responders.Boyd DD. A review of general aviation safety (1984-2017). Aerosp Med Hum Perform. 2017; 88(7):657-664.

Nuclear criticality safety guide

International Nuclear Information System (INIS)

Pruvost, N.L.; Paxton, H.C.

1996-09-01

This technical reference document cites information related to nuclear criticality safety principles, experience, and practice. The document also provides general guidance for criticality safety personnel and regulators

Nuclear criticality safety guide

Energy Technology Data Exchange (ETDEWEB)

Pruvost, N.L.; Paxton, H.C. [eds.

1996-09-01

This technical reference document cites information related to nuclear criticality safety principles, experience, and practice. The document also provides general guidance for criticality safety personnel and regulators.

Regulator Loss Functions and Hierarchical Modeling for Safety Decision Making.

Science.gov (United States)

Hatfield, Laura A; Baugh, Christine M; Azzone, Vanessa; Normand, Sharon-Lise T

2017-07-01

Regulators must act to protect the public when evidence indicates safety problems with medical devices. This requires complex tradeoffs among risks and benefits, which conventional safety surveillance methods do not incorporate. To combine explicit regulator loss functions with statistical evidence on medical device safety signals to improve decision making. In the Hospital Cost and Utilization Project National Inpatient Sample, we select pediatric inpatient admissions and identify adverse medical device events (AMDEs). We fit hierarchical Bayesian models to the annual hospital-level AMDE rates, accounting for patient and hospital characteristics. These models produce expected AMDE rates (a safety target), against which we compare the observed rates in a test year to compute a safety signal. We specify a set of loss functions that quantify the costs and benefits of each action as a function of the safety signal. We integrate the loss functions over the posterior distribution of the safety signal to obtain the posterior (Bayes) risk; the preferred action has the smallest Bayes risk. Using simulation and an analysis of AMDE data, we compare our minimum-risk decisions to a conventional Z score approach for classifying safety signals. The 2 rules produced different actions for nearly half of hospitals (45%). In the simulation, decisions that minimize Bayes risk outperform Z score-based decisions, even when the loss functions or hierarchical models are misspecified. Our method is sensitive to the choice of loss functions; eliciting quantitative inputs to the loss functions from regulators is challenging. A decision-theoretic approach to acting on safety signals is potentially promising but requires careful specification of loss functions in consultation with subject matter experts.

Economics of food safety in chains: a review of general principles

NARCIS (Netherlands)

Valeeva, N.I.; Meuwissen, M.P.M.; Huirne, R.B.M.

2004-01-01

The increased demand for safer food has resulted in the development and introduction of new food safety standards and regulations to reach a higher level of food safety. An integrated approach of controlling food safety throughout the entire food chain (`farm to table`) has become an important issue

Evolution of nuclear safety regulation for BARC Facilities

International Nuclear Information System (INIS)

Jayarajan, K.; Taly, Y.K.

2017-01-01

Safety programmes in BARC stared during the formative years and grown its stature, as the years passed by. Seventeen years of BSC, with one hundred meetings, have been quite eventful with several achievements. BSC could bring all facilities of BARC under its safety umbrella and could streamline many safety and regulatory activities. BSC aims at incident free operation of all facilities and protection of the workers, the public, the environment from radiation and other hazards. Although, incidents could not be entirely prevented, BSC have taken every event as a lesson and used the experience for improving safety. Safety enhancement is an endless journey, which has to be performed by joining hands of the managers, designers, manufacturers, inspectors and operators, in addition to the regulators

General Approaches and Requirements on Safety and Security of Radioactive Materials Transport in Russian Federation

International Nuclear Information System (INIS)

Ershov, V.N.; Buchel'nikov, A.E.; Komarov, S.V.

2016-01-01

Development and implementation of safety and security requirements for transport of radioactive materials in the Russian Federation are addressed. At the outset it is worth noting that the transport safety requirements implemented are in full accordance with the IAEA's ''Regulations for the Safe Transport of Radioactive Material (2009 Edition)''. However, with respect to security requirements for radioactive material transport in some cases the Russian Federation requirements for nuclear material are more stringent compared to IAEA recommendations. The fundamental principles of safety and security of RM managements, recommended by IAEA documents (publications No. SF-1 and GOV/41/2001) are compared. Its correlation and differences concerning transport matters, the current level and the possibility of harmonization are analysed. In addition a reflection of the general approaches and concrete transport requirements is being evaluated. Problems of compliance assessment, including administrative and state control problems for safety and security provided at internal and international shipments are considered and compared. (author)

A General Water Resources Regulation Software System in China

Science.gov (United States)

LEI, X.

2017-12-01

To avoid iterative development of core modules in water resource normal regulation and emergency regulation and improve the capability of maintenance and optimization upgrading of regulation models and business logics, a general water resources regulation software framework was developed based on the collection and analysis of common demands for water resources regulation and emergency management. It can provide a customizable, secondary developed and extensible software framework for the three-level platform "MWR-Basin-Province". Meanwhile, this general software system can realize business collaboration and information sharing of water resources regulation schemes among the three-level platforms, so as to improve the decision-making ability of national water resources regulation. There are four main modules involved in the general software system: 1) A complete set of general water resources regulation modules allows secondary developer to custom-develop water resources regulation decision-making systems; 2) A complete set of model base and model computing software released in the form of Cloud services; 3) A complete set of tools to build the concept map and model system of basin water resources regulation, as well as a model management system to calibrate and configure model parameters; 4) A database which satisfies business functions and functional requirements of general water resources regulation software can finally provide technical support for building basin or regional water resources regulation models.

75 FR 50700 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, and Drawbridge...

Science.gov (United States)

2010-08-17

...] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, and Drawbridge Operation... notice lists temporary safety zones, security zones, special local regulations, and drawbridge operation... responsive to the safety and security needs within their jurisdiction; therefore, District Commanders and...

A study on enforcement effects of radiation safety control regulations for diagnostic X-ray equipment

International Nuclear Information System (INIS)

Sung, Mo IL; Park, Myeong Hwan; Kwon, Duk Moon; Lee, Joon IL

1999-01-01

The purposes of this study are to analyze the realities after enforcements of safety control regulations for diagnostic X-ray equipment and to suggest means for an improvement of low radiation safety control. A questionnaire survey for medical radiologic technologists was carried out to determine enforcement effects of the safety control regulations. The results of analysis from the survey are as follows. That is, most of he respondents realized the importance of the radiation safety control system, but about a half of them revealed that regulations were not well observed in accordance with their purposes. Only 43.9 percent of the respondents took an active part in quality control of radiation. And responsibility, sex, age, and knowledge for safety control were important indicators for observations of the regulations. Training for the safety control regulations are needed to ensure safety control and proper usage of diagnostic X-ray equipment. And management of organizations using diagnostic X-ray equipment have to understand and stress the importance of radiation safety control system. (author)

The UK nuclear regulator's view of external influences on safety

International Nuclear Information System (INIS)

Summers, J.L.

2001-01-01

Over the past forty or so years, significant changes have taken place in the UK nuclear industry and the pace of change is continually increasing. As a consequence, the Nuclear Installations Inspectorate (NII), the UK's nuclear regulator, has also had to change. This paper describes some of the challenges to safety that have arisen in recent years and how NII's style of regulation has had to adapt to ensure that safety is maintained and improved. NII's approach has been to: be proactive in its relations with Government and market regulators; adopt new competencies to equip it for the challenges it faces; strive to improve its efficiency and effectiveness; and develop new approaches to regulating changes in licensees' organisations and ways of working. Importantly, NII seeks to anticipate change rather than react to it. (author)

Safety performance indicators used by the Russian Safety Regulatory Authority in its practical activities on nuclear power plant safety regulation

International Nuclear Information System (INIS)

Khazanov, A.L.

2005-01-01

The Sixth Department of the Nuclear, Industrial and Environmental Regulatory Authority of Russia, Scientific and Engineering Centre for Nuclear and Radiation Safety process, analyse and use the information on nuclear power plants (NPPs) operational experience or NPPs safety improvement. Safety performance indicators (SPIs), derived from processing of information on operational violations and analysis of annual NPP Safety Reports, are used as tools to determination of trends towards changing of characteristics of operational safety, to assess the effectiveness of corrective measures, to monitor and evaluate the current operational safety level of NPPs, to regulate NPP safety. This report includes a list of the basic SPIs, those used by the Russian safety regulatory authority in regulatory activity. Some of them are absent in list of IAEA-TECDOC-1141 ('Operational safety performance indicators for nuclear power plants'). (author)

A German perspective on advances in safety standards and regulations

International Nuclear Information System (INIS)

Berg, H.P.; Herttrich, P.M.

1993-01-01

At present, different proposals for evolutionary or innovative reactors are under consideration. Therefore, it is necessary that the regulators give guidance on the required safety characteristics of future designs of nuclear power plants. On the one hand, existing regulations have to be updated according to the current state of science and technology. Best available and adequately approved technology has to be used as a yardstick for the acceptability of future basic design features. On the other hand, potential safety features of innovative or revolutionary designs must be considered as serious competitors and potential technical solutions taking the state of maturity of the concepts, the extent of practical experience and the level of effort needed for realization into due account. On this background, recent developments of the Atomic Energy Act, of safety regulations and investigations of requirements for future designs in the Federal Republic of Germany and current projects of international cooperation are presented. (author)

Assessment of policy issues in nuclear safety regulation according to circumstantial changes

Energy Technology Data Exchange (ETDEWEB)

Chang, Soon Heung; Lee, Byong Ho; Baek, Woon Pil; Lee, Seong Wook; Choi, Seong Soo; Roh, Chang Hyun; Lee, Kwang Gu [Korea Advanced Institute of Scienc and Technology, Taejon (Korea, Republic of)

1998-03-15

The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. The derivation of an effective regulation system considering 'Rhodic Safety Review (PSR)', 'operating License Renewal (LR)', 'backfitting' and 'maintenance rule' is the main objective of the first two years. It is found that those approaches should be introduced in Korea as soon as possible, with cross lingkage to maximize the effectiveness of regulation. In particular, the approaches for PSR are discussed with consultation of IAEA document and foreign practices.

49 CFR 192.53 - General.

Science.gov (United States)

2010-10-01

... Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.53 General. Materials for pipe and...

NRC safety research in support of regulation, 1988

International Nuclear Information System (INIS)

1989-05-01

This report, the fourth in a series of annual reports, was prepared in response to Congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during 1988. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

The improvement of nuclear safety regulation : American, European, Japanese, and South Korean experiences

International Nuclear Information System (INIS)

Cho, Byung Sun

2005-01-01

Key concepts in South Korean nuclear safety regulation are safety and risk. Nuclear regulation in South Korea has required reactor designs and safeguards that reduce the risk of a major accident to less than one in a million reactor-years-a risk supposedly low enough to be acceptable. To data, in South Korean nuclear safety regulation has involved the establishment of many technical standards to enable administration enforcement. In scientific lawsuits in which the legal issue is the validity of specialized technical standards that are used for judge whether a particular nuclear power plant is to be licensed, the concept of uncertainty law is often raised with regard to what extent the examination and judgement by the judicial power affects a discretion made by the administrative office. In other words, the safety standards for nuclear power plants has been adapted as a form of the scientific technical standards widely under the idea of uncertainty law. Thus, the improvement of nuclear safety regulation in South Korea seems to depend on the rational lawmaking and a reasonable, judicial examination of the scientific standards on nuclear safety

Safety experts complete second IAEA regulatory review of UK nuclear regulator

International Nuclear Information System (INIS)

2009-01-01

Government senior adviser. IAEA IRRS Coordinator Mr. Gustavo Caruso said, ''The HSE/ND at all levels were enthusiastic and very interested in obtaining advice relating to the application of the IAEA safety standards for their further development.'' In the light of the UK Government decision to move the regulatory body to a Statutory Corporation, IRRS team members conducted a review of the transition arrangements put in place by HSE/ND. It was concluded that it is of vital importance to take several fundamental principles into account during and after the transition: adequate legal authority, effective independence, technical and managerial competence and human and financial resources to fulfil all regulatory responsibilities and functions. ND has developed and is implementing a comprehensive programme for this transition process. Mr. Tomihiro Taniguchi, IAEA Deputy Director General, said, ''This is especially important and timely in the context of the world wide nuclear 'vita nova' - providing input to the new entrants as well as the rapidly expanding current nuclear programmes, without adequate regulatory competence and resources.'' Mike Weightman, Head of ND and HM Chief Inspector of Nuclear Installations said: ''The Nuclear Directorate welcomes this important peer review of our regulatory arrangements and practices as part of our continuing to strive to be at the cutting edge of nuclear regulation worldwide. This review comes at a most important time for us with the Government's proposal to provide us with more freedom and independence to better meet challenges of a changing nuclear industry. We are committed to taking the necessary measures to address the findings made in the IAEA report, when it is finalised, and welcome the recognition of several of our practices as good examples for nuclear regulators around the world.'' (IAEA)

Legal status of minister's notices and technology standards of 'Korea institute of nuclear safety'(KINS) to regulate nuclear safety

International Nuclear Information System (INIS)

Jung, S. K.; Jung, M. M.; Kim, S. W.; Jang, K. H.; Oh, B. J.

2003-01-01

Concerning nuclear safety or technology standards, each of 'notices' issued by minister of science and technology(MOST) empowered by law of its regulation is obviously forceful as a law, if not all. But the standards made by the chief of Korea institute of nuclear safety(KINS) to meet the tasks entrusted to KINS by MOST is only conditionally forceful as a law, that is, on the condition that law or regulation empowered the chief of KINS to make nuclear safety and/or technology standards

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

2006-01-01

Jan 1, 2006 ... Book cover Environmental Regulation and Food Safety: Studies of ... are sometimes perceived in developing countries as nontariff barriers to trade. ... In some cases, products that had initially been refused access to a ...

Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan

Directory of Open Access Journals (Sweden)

Wen-Hwa Ko

2015-12-01

Full Text Available The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was classified into employee behavior and corporate practice. Food suppliers with training in food safety were significantly better than those without training with respect to the constructs of perception dimension of employee attitude, and the constructs of employee behavior and corporate practice associated with the behavior dimension. Older employees were superior in perception and practice. Employee attitude, employee behavior, and corporate practice were significantly correlated with each other. Satisfaction with governmental management was not significantly related to corporate practice. The corporate implementation of food safety regulations by suppliers was affected by employees' attitudes and behaviors. Furthermore, employees' attitudes and behaviors explain 35.3% of corporate practice. Employee behavior mediates employees' attitudes and corporate practices. The results of this study may serve as a reference for governmental supervision and provide training guidelines for workers in the food supply industry.

The Competence Promoting by NNSA for Keeping High Level Nuclear Safety: The Corner Stone of the Nuclear Safety Regulation Edifice

International Nuclear Information System (INIS)

Hu, L.

2016-01-01

Facing the fast development of the nuclear power industry and the application of radioactive sources, The MEP(NNSA) is endeavoured to promoting its competency, including: complementing the law system, training and recruiting staff to keep a capable team, constructing the R&D base to keep the basic capability, promoting safety culture both for the industry and the regulator. After the Fukushima nuclear accident, the MEP(NNSA) planned to construct R&D base, in which the Platform Nuclear Safety Monitoring and Emergency Responding, the Platform of Safety Technology of PWR Testing, the Laboratory of Safety Management Technology of Nuclear Waste Verification, the Laboratory of Environmental Radiation Monitoring and the Center of International Cooperation are included. On the other hand, the MEP(NNSA) issued Chinese nuclear safety culture policy declaration in 2014, and carried out a large scale Specialized Action for Nuclear Safety Promotion to promote the nuclear safety culture both for the industry and herself. For the nuclear regulator, It is essential to conduct the competence promoting by both “hardware” and “software”, the former is the material foundation of regulation authority, which will be effectively functioning under the facilitating of the latter. (author)

Safety evaluation and regulation of chemicals. 2. Impact of regulations - improvement of methods

Energy Technology Data Exchange (ETDEWEB)

Homburger, F [ed.

1985-01-01

This volume assesses the impact of new scientific knowledge on the testing and regulation of chemicals, including food additives, drugs, cosmetics, pesticides, and other commercial substances. Apart from describing the newest tests, regulations, and risk assessment strategies, chapters reflect changes forced by both the growing need for cost containment and the mounting pressure to find alternatives to animal testing. Based on an international congress, the book also brings the advantage of diversity in the background and nationality of the authors, thus allowing a view of central problems according to the different interests of academics, industry scientists, government scientists, and regulators. The book opens with coverage of national and international regulations designed to prevent and control damage to human health and the environment. Topics range from basic problems of policy design and enforcement to the specific requirements for chemical regulation in developing countries. The next chapters cover new tests, systems, and assays used in in vivo safety testing. Readers will find a critical assessment of tests used to determine teratogenicity, mutagenicity, carcinogenicity, neurotoxicity and chemical lethality. Other topics include factors operating in the public perception of chemical hazards, guidelines for decision making in the management and regulation of risks, and future trends in the methodology of safety evaluation. The volume concludes with an overview of in vitro methods for testing hepatotoxicity. Several short-term in vitro test models and limited in vivo bioassays are presented and evaluated in terms of their capacity to substitute for long-term animal studies. Expert and thorough in its coverage, the book offers a wealth of technical and practical information for toxicologists, pharmacologists, industrial policy makers, and government regulators. (orig.). With 67 figs., 34 tabs.

Knowledge Management for Safety Regulators: Cooperation to Achieve a Much Needed Product

International Nuclear Information System (INIS)

Mallick, S.

2016-01-01

Full text: Knowledge management (KM) has been identified by a number of IAEA documents as one of the key factors that can contribute to the safe and efficient operation of nuclear facilities in Member States. The IAEA Strategic Approaches to Education and Training in Nuclear and Radiation, Transport and Waste Safety identify and underline KM as an important line of action for effective national and organizational strategies in education and training. The capacity building “umbrella concept”, developed within the Action Plan in Nuclear Safety, also recognizes KM as one of the main four pillars (Education and Training, Human Resource Development, Knowledge Management and Knowledge Networks) of capacity building. Within existing IAEA publications, there is currently no specific practical guidance on how to develop and implement KM programmes for regulators. As such, in 2014, the IAEA Steering Committee on Regulatory Capacity Building and Knowledge Management requested the IAEA to develop a publication providing such practical guidance. The objective of the publication is to provide practical guidance to Member States on how to plan, establish and maintain an effective safety KM programme for regulators of facilities and activities. The report will identify benefits and uses of KM by regulators and will describe how a regulator could use KM in support of its functions. This presentation will provide an overview of the Knowledge Management for Safety Regulators document while highlighting the cross-departmental cooperation (i.e., NS and NE) used in its development. Furthermore, this presentation will provide insight into the challenges currently being faced by safety regulators vis-à-vis KM programmes and present potential paths forward with respect to the definition of efficient and effective KM indicators. (author

Study on the development of safety regulations for geological disposal of high-level radioactive waste

International Nuclear Information System (INIS)

Wei Fangxin

2012-01-01

The development of regulations under Regulations on Safety Management of Radioactive Waste has become necessary as the issuance of it. The regulations related to geological disposal of high-level radioactive waste can promote the progress of research and development on geological disposal of high-level radioactive waste in China. This paper has present suggestions on development of regulations on geological disposal of high-level radioactive waste by analyzing development of safety regulations on geological disposal of high-level radioactive waste in foreign countries and problems occurred in China and discussed important issues related to the development of safety regulations on geological disposal of high-level radioactive waste. (author)

Safety regulation for the design approval of special form radioactive sources

International Nuclear Information System (INIS)

Cho, Woon-Kap

2009-01-01

Several kinds of special form radioactive sources for industrial, medical applications are being produced in Korea. Special form radioactive sources should meet strict safety requirements specified in the domestic safety regulations and the design of the sources should be certified by the regulatory authority, the Ministry of Education, Science and Technology (MEST). Several safety tests such as impact, percussion, heating, and leak tests are performed on the sources according to the domestic regulations and the international safety standards such as ANSI N542-1977 and ISO 2919-1999(E). As a regulatory expert body, Korea Institute of Nuclear Safety (KINS) assesses various types of application documents, such as safety analysis report, quality assurance program, and other documents evidencing fulfillment of requirements for design approval of the special form radioactive sources, submitted by a legal person who intends to produce special form radioactive sources and then reports the assessment result to MEST. A design approval certificate is issued to the applicant by MEST on the basis of a technical evaluation report presented by KINS.

75 FR 73946 - Worker Safety and Health Program: Safety Conscious Work Environment

Science.gov (United States)

2010-11-30

... Environment AGENCY: Office of the General Counsel, Department of Energy (DOE). ACTION: Notice of denial of... Nuclear Regulatory Commission's ``Safety-Conscious Work Environment'' guidelines as a model. DOE published.... Second, not only would instituting a ``Safety-Conscious Work Environment'' by regulation be redundant...

CONFORMITY TO OCCUPATIONAL SAFETY AND HEALTH REGULATIONS IN MALAYSIAN SMALL AND MEDIUM ENTERPRISES

OpenAIRE

Baba Md Deros; Ahmad Rasdan Ismail; Jaharah A. Ghani; Mohd Yusri Mohd Yusof

2014-01-01

Regulation on occupational safety and health in Malaysia had evolved from the prescriptive factory and machinery act to a self-regulated occupational safety and health act. However, from the authors’ observation the high standards of occupational safety and health culture that surpass the legal requirement were not widely practiced by Small and Medium Enterprises (SMEs). The two main objectives of this study are: First, first, to identify and determine the level of conformity and second...

Regulatory regime and its influence in the nuclear safety

International Nuclear Information System (INIS)

Laaksonen, J.

1999-01-01

Main elements of nuclear regulatory regime in general is presented. These elements are: national rules and safety regulations, system of nuclear facility licensing, activities of regulatory body. Regulatory body is needed to specify the national safety regulations, review and assess the safety documentation presented to support license application, make inspections to verify fulfilment of safety regulations and license conditions, monitor the quality of work processes of user organization, and to assess whether these processes provide a high safety level, promote high safety culture, promote maintenance and development of national infrastructure relevant to nuclear safety, etc

Safety of nuclear pressure vessels and its regulatory aspects in France

Energy Technology Data Exchange (ETDEWEB)

de Torquat, G; Queniart, D; Barrachin, B; Roche, R

1979-01-01

Having outlined the basic French regulations governing the safety of both pressure vessels and also of nuclear installations in general the particular safety regulations covering prestressed concrete vessels for nuclear reactors are considered. The regulations now being prepared to cover heat transfer systems of water reactors are detailed under sections headed; general provisions, sizing, and construction.

Framework for applying probabilistic safety analysis in nuclear regulation

International Nuclear Information System (INIS)

Dimitrijevic, V.B.

1997-01-01

The traditional regulatory framework has served well to assure the protection of public health and safety. It has been recognized, however, that in a few circumstances, this deterministic framework has lead to an extensive expenditure on matters hat have little to do with the safe and reliable operation of the plant. Developments of plant-specific PSA have offered a new and powerful analytical tool in the evaluation of the safety of the plant. Using PSA insights as an aid to decision making in the regulatory process is now known as 'risk-based' or 'risk-informed' regulation. Numerous activities in the U.S. nuclear industry are focusing on applying this new approach to modify regulatory requirements. In addition, other approaches to regulations are in the developmental phase and are being evaluated. One is based on the performance monitoring and results and it is known as performance-based regulation. The other, called the blended approach, combines traditional deterministic principles with PSA insights and performance results. (author)

Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan.

Science.gov (United States)

Ko, Wen-Hwa

2015-12-01

The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was classified into employee behavior and corporate practice. Food suppliers with training in food safety were significantly better than those without training with respect to the constructs of perception dimension of employee attitude, and the constructs of employee behavior and corporate practice associated with the behavior dimension. Older employees were superior in perception and practice. Employee attitude, employee behavior, and corporate practice were significantly correlated with each other. Satisfaction with governmental management was not significantly related to corporate practice. The corporate implementation of food safety regulations by suppliers was affected by employees' attitudes and behaviors. Furthermore, employees' attitudes and behaviors explain 35.3% of corporate practice. Employee behavior mediates employees' attitudes and corporate practices. The results of this study may serve as a reference for governmental supervision and provide training guidelines for workers in the food supply industry. Copyright © 2015. Published by Elsevier B.V.

The Role of the Regulator in the Field of Safety Culture to Shun Nuclear Accident

International Nuclear Information System (INIS)

Kandil, M.M.

2016-01-01

The 2011 accident at the Fukushima Daiichi nuclear power plant in Japan has, as might be expected, led to improvements in equipment at plants around the world that have fortified safety systems and allowed for better protection against rare, extreme natural events. Equally important to the process of improving nuclear safety is the emphasis placed on implementing quality improvements to the human side of nuclear safety, a crucial element that is often not considered by those outside the nuclear sector. Ensuring nuclear reactor safety is not only a question of physical protection against all credible threats, enhancing robustness of important safety systems and increasing redundancy of back-up power and water cooling systems, but also one of making certain that qualified and trained staff are supported by effective procedures. However, these assets are valued only in an organizational culture that places a premium on ensuring high levels of safety, or implementing what is called an effective “nuclear safety culture”. Principles, characteristics and factors for effective safety culture are to great extent similar between licencees and regulatory bodies and can be applied for developing RB’s safety. Safety is the primary purpose of the regulatory body, Regulator plays a significant role in the field of nuclear safety even though the prime responsibility for safety belongs to the operator, and it is the regulator which actually decides what is considered to be safe. In order to effectively implement the international principle of high level of nuclear safety, nuclear safety culture should be clearly named as an objective in international nuclear legal acts and the regulator’s responsibility for promotion of nuclear safety culture should be established. What is more difficult for the regulator is finding the right balance of firmness but fairness in dealing with the operator. In addition to enforcing safety regulations, the regulator should have a positive

Implications of the accident at Chernobyl for safety regulation of commercial nuclear power plants in the United States: Volume 1, Main report: Final report

International Nuclear Information System (INIS)

1989-04-01

This report was prepared by the Nuclear Regulatory Commission (NRC) staff to assess the implications of the accident at the Chernobyl nuclear power plant as they relate to reactor safety regulation for commercial nuclear power plants in the United States. The facts used in this assessment have been drawn from the US fact-finding report (NUREG-1250) and its sources. The general conclusions of the document are that there are generic lessons to be learned but that no changes in regulations are needed due to the substantial differences in the design, safety features and operation of US plants as compared to those in the USSR. Given these general conclusions, further consideration of certain specific areas is recommended by the report. These include: administrative controls over reactor regulation, reactivity accidents, accidents at low or zero power, multi-unit protection, fires, containment, emergency planning, severe accident phenomena, and graphite-moderated reactors

Assessing risks and regulating safety standards in the oil and gas industry: the Peruvian experience.

OpenAIRE

Arturo Leonardo Vásquez Cordano; Julio Salvador Jácome; Raúl Lizardo García Carpio; Victor Fernández Guzman

2013-01-01

Environmental regulation has usually focused on controlling continuous sources of pollution such as CO2 emissions through carbon taxes. However, the 2010 oil spill in the Gulf of Mexico has shown that accidents associated to safety failures can also generate bursts of pollution with serious environmental consequences. Regulating safety conditions to prevent accidents in the oil and gas industry is challenging because public regulators cannot perfectly observe whether firms comply with safety ...

General safety considerations

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

This document presents the full filling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 4 of the document contains some details about the priority to safety, financial and human resources, human factors, quality assurance, safety assessment and verification, radiation protection and emergency preparedness.

General safety considerations

International Nuclear Information System (INIS)

2001-01-01

This document presents the full filling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 4 of the document contains some details about the priority to safety, financial and human resources, human factors, quality assurance, safety assessment and verification, radiation protection and emergency preparedness

General safety considerations

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-01

This document presents the full filling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 4 of the document contains some details about the priority to safety, financial and human resources, human factors, quality assurance, safety assessment and verification, radiation protection and emergency preparedness.

General safety considerations

International Nuclear Information System (INIS)

1998-01-01

This document presents the full filling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 4 of the document contains some details about the priority to safety, financial and human resources, human factors, quality assurance, safety assessment and verification, radiation protection and emergency preparedness

Predisposal Management of Radioactive Waste. General Safety Requirements Pt. 5

International Nuclear Information System (INIS)

2010-01-01

There are a large number of facilities and activities around the world in which radioactive material is produced, handled and stored. This Safety Requirements publication presents international consensus requirements for the management of radioactive waste prior to its disposal. It provides the safety imperatives on the basis of which facilities can be designed, operated and regulated. The publication is supported by a number of Safety Guides that provide up to date recommendations and guidance on best practices for management of particular types of radioactive waste, for storage of radioactive waste, for assuring safety by developing safety cases and supporting safety assessments, and for applying appropriate management systems. Contents: 1. Introduction; 2. Protection of human health and the environment; 3. Responsibilities associated with the predisposal management of radioactive waste; 4. Steps in the predisposal management of radioactive waste; 5. Development and operation of predisposal radioactive waste management facilities and activities; Annex: Predisposal management of radioactive waste and the fundamental safety principles.

Predisposal Management of Radioactive Waste. General Safety Requirements Pt. 5

International Nuclear Information System (INIS)

2009-01-01

There are a large number of facilities and activities around the world in which radioactive material is produced, handled and stored. This Safety Requirements publication presents international consensus requirements for the management of radioactive waste prior to its disposal. It provides the safety imperatives on the basis of which facilities can be designed, operated and regulated. The publication is supported by a number of Safety Guides that provide up to date recommendations and guidance on best practices for management of particular types of radioactive waste, for storage of radioactive waste, for assuring safety by developing safety cases and supporting safety assessments, and for applying appropriate management systems. Contents: 1. Introduction; 2. Protection of human health and the environment; 3. Responsibilities associated with the predisposal management of radioactive waste; 4. Steps in the predisposal management of radioactive waste; 5. Development and operation of predisposal radioactive waste management facilities and activities; Annex: Predisposal management of radioactive waste and the fundamental safety principles.

Patients' evaluations of patient safety in English general practices: a cross-sectional study.

Science.gov (United States)

Ricci-Cabello, Ignacio; Marsden, Kate S; Avery, Anthony J; Bell, Brian G; Kadam, Umesh T; Reeves, David; Slight, Sarah P; Perryman, Katherine; Barnett, Jane; Litchfield, Ian; Thomas, Sally; Campbell, Stephen M; Doos, Lucy; Esmail, Aneez; Valderas, Jose M

2017-07-01

Description of safety problems and harm in general practices has previously relied on information from health professionals, with scarce attention paid to experiences of patients. To examine patient-reported experiences and outcomes of patient safety in primary care. Cross-sectional study in 45 general practices across five regions in the north, centre, and south of England. A version of the Patient Reported Experiences and Outcomes of Safety in Primary Care (PREOS-PC) questionnaire was sent to a random sample of 6736 patients. Main outcome measures included 'practice activation' (what a practice does to create a safe environment); 'patient activation' (how proactive are patients in ensuring safe healthcare delivery); 'experiences of safety events' (safety errors); 'outcomes of safety' (harm); and 'overall perception of safety' (how safe patients rate their practice). Questionnaires were returned by 1244 patients (18.4%). Scores were high for 'practice activation' (mean [standard error] = 80.4 out of 100 [2.0]) and low for 'patient activation' (26.3 out of 100 [2.6]). Of the patients, 45% reported experiencing at least one safety problem in the previous 12 months, mostly related to appointments (33%), diagnosis (17%), patient provider communication (15%), and coordination between providers (14%). Twenty-three per cent of the responders reported some degree of harm in the previous 12 months. The overall assessment of level of safety of practices was generally high (86.0 out of 100 [16.8]). Priority areas for patient safety improvement in general practices in England include appointments, diagnosis, communication, coordination, and patient activation. © British Journal of General Practice 2017.

Practice specific model regulations: Radiation safety of non-medical irradiation facilities. Interim report for comment

International Nuclear Information System (INIS)

2003-08-01

the infrastructure aimed at achieving its maximum efficiency, and extensively covers performance regulations. The BSS cover the application of ionizing radiation for all practices and interventions and are, therefore, basic and general in nature. Users must apply these basic requirements to their own particular practices. In this context, the preamble of the BSS states that: 'The Regulatory Authority may need to provide guidance on how certain regulatory requirements are to be fulfilled for various practices, for example in regulatory guideline documents.' There are certain requirements that, when applied to specific practices, can be fulfilled through virtually only one practical solution. In these cases, the regulatory authority would use a 'shall' statement for this solution. To meet other requirements, there may be more than one option. In these cases the regulatory authority would usually indicate the recommended option with a 'should' statement, which implies that licensees may choose another alternative provided that the level of safety is equivalent. This distinction has been maintained in this 'model regulations' for irradiation facilities in order to facilitate the decision of regulatory authorities on the degree of obligation

Patient safety culture measurement in general care: clinimetric properties of 'SCOPE'.

NARCIS (Netherlands)

Zwart, D.L.M.; Langelaan, M.; Vooren, R.C. van de; Kuyvenhoven, M.M.; Kalkman, C.J.; Verheij, T.J.M.; Wagner, C.

2011-01-01

BACKGROUND: A supportive patient safety culture is considered to be an essential condition for improving patient safety. Assessing the current safety culture in general practice may be a first step to target improvements. To that end, we studied internal consistency and construct validity of a

The safety regulation of small-scale coal mines in China: Analysing the interests and influences of stakeholders

International Nuclear Information System (INIS)

Song, Xiaoqian; Mu, Xiaoyi

2013-01-01

Small scale coal mines (SCMs) have played an important role in China’s energy supply. At the same time, they also suffer from many social, economic, environmental, and safety problems. The Chinese government has made considerable efforts to strengthen the safety regulation of the coal mining industry. Yet, few of these efforts have proven to be very effective. This paper analyzes the interests and influences of key stakeholders in the safety regulation of SCMs, which includes the safety regulator, the local government, the mine owner, and mineworkers. We argue that the effective regulation of coal mine safety must both engage and empower mineworkers. - Highlights: ► Small scale coal mines have played an important role in China's energy supply. ► We analyze the interests and influences of key stakeholders in the safety regulation of small coal mines. ► The mineworkers have the strongest interest but least influence. ► An effective regulation must engage the mineworkers, organize, and empower them.

NRC safety research in support of regulation--FY 1989

International Nuclear Information System (INIS)

1990-04-01

This report, the fifth in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1989. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

NRC safety research in support of regulation, FY 1991

International Nuclear Information System (INIS)

1992-04-01

This report, the seventh in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1991. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

NRC safety research in support of regulation, FY 1990

International Nuclear Information System (INIS)

1991-04-01

This report, the sixth in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1990. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

Implementation of ICRP-60, BBS-115 and the patient directives in radiation safety regulations of TAEK

International Nuclear Information System (INIS)

Okyar, H.B.; Vural, M.

2001-01-01

The use of radiation sources offers a wide range of benefits throughout the world in medicine, research and industry. Precautions are, however, necessary in order to limit the exposure of persons to the radiation that is emitted. The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS) were published as IAEA Safety Series No 115 in 1996. This publication marks the culmination of efforts that have continued over the past decades towards harmonization of radiation protection and safety standards internationally. The purpose of the Standards is to establish basic requirements for the protection against the risks associated with exposure to ionizing radiation and for the safety of radiation sources that may deliver such exposure. The Standards are based primarily on the recommendations of the ICRP which is a non-governmental scientific organization to establish basic principles and recommendations for radiation protection; the most recent recommendations of the ICRP were issued in 1991. In 1997, the Council of the European Union published a new directive laying down the general principles of the radiation protection of individuals undergoing exposures to ionizing radiations related to medical exposures (Directive 97/43 Euratom). Directive 97/43 Euratom is a supplement to Directive 96/29 Euratom on the basic safety standards for the protection of the health of workers and the general public against the dangers arising from ionizing radiations. The European Directives 96/29-97/43 Euratom and BSS-115 constitute a complete and coherent set of regulatory measures on radiation protection. In Turkey, the infrastructure exists to account for ionizing radiation sources by, for example, a system of licensing, legislative requirements on the user to keep appropriate records and perhaps to report to the TAEK on a periodic basis or, in the case of imported items (including re-export procedures) and customs

Safety regulation: The lessons of workplace safety rule management for managing the regulatory burden

OpenAIRE

Hale, A.R.; Borys, D.; Adams, M.

2012-01-01

There is a strong political consensus in a number of countries that occupational safety and health regulation is stifling industrial innovation and development and is feeding a culture of damaging risk aversion and petty bureaucracy. In a number of countries this has led to proposals to repeal regulations and reduce the regulatory burden. The authors were commissioned to prepare a discussion paper on this issue by the Mercatus Center of George Mason University in Arlington, Virginia, aimed pa...

NRC - regulator of nuclear safety

International Nuclear Information System (INIS)

1997-01-01

The U.S. Nuclear Regulatory Commission (NRC) was formed in 1975 to regulate the various commercial and institutional uses of nuclear energy, including nuclear power plants. The agency succeeded the Atomic Energy Commission, which previously had responsibility for both developing and regulating nuclear activities. Federal research and development work for all energy sources, as well as nuclear weapons production, is now conducted by the U.S. Department of Energy. Under its responsibility to protect public health and safety, the NRC has three principal regulatory functions: (1) establish standards and regulations, (2) issue licenses for nuclear facilities and users of nuclear materials, and (3) inspect facilities and users of nuclear materials to ensure compliance with the requirements. These regulatory functions relate to both nuclear power plants and to other uses of nuclear materials - like nuclear medicine programs at hospitals, academic activities at educational institutions, research work, and such industrial applications as gauges and testing equipment. The NRC places a high priority on keeping the public informed of its work. The agency recognizes the interest of citizens in what it does through such activities as maintaining public document rooms across the country and holding public hearings, public meetings in local areas, and discussions with individuals and organizations

Classification of research reactors and discussion of thinking of safety regulation based on the classification

International Nuclear Information System (INIS)

Song Chenxiu; Zhu Lixin

2013-01-01

Research reactors have different characteristics in the fields of reactor type, use, power level, design principle, operation model and safety performance, etc, and also have significant discrepancy in the aspect of nuclear safety regulation. This paper introduces classification of research reactors and discusses thinking of safety regulation based on the classification of research reactors. (authors)

Advisory material for the IAEA regulations for the safe transport of radioactive material. Safety guide

International Nuclear Information System (INIS)

2008-01-01

Since the first edition in 1961, the Regulations for the Safe Transport of Radioactive Material of the IAEA (IAEA Regulations) have served as the basis of safety for the transport of radioactive material worldwide. In the discussions leading to the first edition of the IAEA Regulations, it was realized that there was need for a publication to supplement the Regulations which could give information of individual provisions as to their purpose, their scientific background and how to apply them in practice. In response, the Agency published Safety Series No. 7, entitled, in its first edition in 1961, 'Notes on Certain Aspects of the Regulations'. An additional source of information on the Regulations, providing advice on 'how' the user should comply with them which could be augmented from time to time in the light of latest experience, was provided by the Agency, initially in relation to the 1973 edition of the Regulations. This was entitled 'Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material' and designated Safety Series No. 37. This document is the result of combining the two Safety Series in a single publication. Thus the primary purpose of this publication is to provide guidance to users on proven and acceptable ways of complying with the Regulations. This Advisory Material is not a stand-alone text and it only has significance when used as a companion to the IAEA Safety Standards Series No. ST-1, Regulations for the Safe Transport of Radioactive Material (1996 edition)

Regulation and safety implementation of nanotechnology for chemical enterprises in the Central Europe Space

Science.gov (United States)

Falk, A.; Hartl, S.; Sinner, F.

2013-04-01

As result of the gradually increasing nanotechnology sector there is the necessity of a contemporary analysis of the present regulations used for nanomaterials, to outline the current situation of the nanotechnology sector, to promote international cooperation and research's coordination to overcome disciplinary boundaries, to fill the gap between more and less experienced regions and to turn investments in R&D in industrial innovations. The general objective of the Central Europe project NANOFORCE, which is developed by national and regional chemistry associations and R&D Centres of the Central Europe area, is to foster the innovative nanotechnology-sector networks across Central Europe regions by bringing together public and private organizations to carry out collaborative and interdisciplinary researches on nanomaterials (in the frame of REACH Regulation) and to turn the most promising laboratory results into innovative industrial applications. To build up a legal advisory board for chemical enterprises starting in nanotechnology, a state of the art report on existing safety procedures and nanotech related regulations was produced to give an overview on currently available regulations used by chemical industries and manufacturing companies within the European region to secure their products. The main emphasis was placed on REACH regulation to search for relevant sections concentrating on nanomaterials which are applicable for nanotechnology. In addition, all relevant directives and amendments of REACH were screened with regard to identify gaps where action is still needed and give possible recommendations for the European Commission. Beyond literature research a questionnaire for producers, users, researchers and financiers was developed with the goal to collect information about the nanotechnology sector in the CE region concerning development, financial status, and international cooperation within joint ventures, safety and nanotoxicology.

Improved safety for drivers and couriers of coaches

NARCIS (Netherlands)

Coo, P.J.A. de; Hazelebach, R.; Oorschot, E. van; Wessels, J.

2001-01-01

According to general accidents statistics a coach is the safest means of transportation with respect to fatalities per billion traveller kilometers. Reasons for this include the existing regulations related to coach safety and the self regulation of the coach building industry. Most passive safety

Trends in food safety standards and regulation implications for developing countries

OpenAIRE

Caswell, Julie A.

2003-01-01

"Food safety is affected by the decisions of producers, processors, distributors, food service operators, and consumers, as well as by government regulations. In developed countries, the demand for higher levels of food safety has led to the implementation of regulatory programs that address more types of safety-related attributes (such as bovine spongiform encephalopathy (BSE), microbial pathogens, environmental contaminants, and animal drug and pesticide residues) and impose stricter standa...

[Problems of safety regulation under radioactive waste management in Russia].

Science.gov (United States)

Monastyrskaia, S G; Kochetkov, O A; Barchukov, V G; Kuznetsova, L I

2012-01-01

Analysis of the requirements of Federal Law N 190 "About radioactive waste management and incorporation of changes into some legislative acts of the Russian Federation", as well as normative-legislative documents actual and planned to be published related to provision of radiation protection of the workers and the public have been done. Problems of safety regulation raised due to different approaches of Rospotrebnadzor, FMBA of Russia, Rostekhnadzor and Minprirody with respect to classification and categorization of the radioactive wastes, disposal, exemption from regulatory control, etc. have been discussed in the paper. Proposals regarding improvement of the system of safety regulation under radioactive waste management and of cooperation of various regulatory bodies have been formulated.

77 FR 33777 - General Aviation Safety Forum: Climbing to the Next Level

Science.gov (United States)

2012-06-07

... NATIONAL TRANSPORTATION SAFETY BOARD General Aviation Safety Forum: Climbing to the Next Level The National Transportation Safety Board (NTSB) will convene a 2- day forum focused on safety issues related to... the Next Level,'' will be chaired by NTSB Chairman Deborah A. P. Hersman and all five Board Members...

White paper on nuclear safety in 2004

International Nuclear Information System (INIS)

2005-05-01

The white paper consists of four parts. The first part described the regulation of nuclear facility decommissioning and the clearance level at which the decommissioned waste materials are not necessarily treated as radioactive materials. The second part explained the main operations of the nuclear safety regulation of the Nuclear Safety Commission and the regulatory bodies in 2004 and Mihama unit 3 accident. The third part introduced various activities for the general preservation of nuclear safety in Japan, such as safety regulation systems for nuclear facilities, disaster preparedness of nuclear facilities, progress in nuclear research, environmental radiation surveys and international cooperation on nuclear safety. The forth part contained various materials and data related to the Nuclear Safety Commission. (J.P.N.)

The IAEA Transport Safety Appraisal Service (TranSAS)

International Nuclear Information System (INIS)

Dicke, G.J.

2004-01-01

Representatives of all Member States of the IAEA meet once a year in September at the General Conference in Vienna, Austria, to consider and approve the Agency's programme and budget and to address matters brought before it by the Board of Governors, the Director General, or Member States. In September 1998 the General Conference adopted resolution GC(42)/RES/13 on the Safety of Transport of Radioactive Materials. In adopting that resolution the General Conference recognized that compliance with regulations that take account of the IAEA Regulations for the Safe Transport of Radioactive Material (the IAEA Transport Regulations) is providing a high level of safety during the transport of radioactive material. Good compliance requires that the regulations are implemented effectively. The General Conference therefore requested the IAEA Secretariat to provide a service for carrying out, at the request of any State, an appraisal of the implementation of the Transport Regulations by that State. In response to this request the Director General of the IAEA offered such an appraisal service to all States in letter J1.01.Circ, dated 10 December 1998. The first Transport Safety Appraisal Service (TranSAS) was undertaken and completed at the request of Slovenia in 1999. A report on the results of that appraisal was published and released for general distribution in the early fall of 1999. In each of the General Conferences since 1998, resolutions focused on transport safety have commended the Secretariat for establishing the TranSAS, commended those States that have requested the appraisal service and encouraged other States to avail themselves of this service see GC(43)/RES/11, GC(44)/RES/17, GC(45)/RES/10, GC(46)/RES/9 and GC(47)/RES/7. Six appraisals have been carried out to date as follows: Slovenia, Brazil, United Kingdom, Turkey, Panama and France. This presentation provides an overview of the Transport Safety Appraisal Service and summarizes the major findings from the

The IAEA Transport Safety Appraisal Service (TranSAS)

Energy Technology Data Exchange (ETDEWEB)

Dicke, G.J. [International Atomic Energy Agency, Vienna (Austria)

2004-07-01

Representatives of all Member States of the IAEA meet once a year in September at the General Conference in Vienna, Austria, to consider and approve the Agency's programme and budget and to address matters brought before it by the Board of Governors, the Director General, or Member States. In September 1998 the General Conference adopted resolution GC(42)/RES/13 on the Safety of Transport of Radioactive Materials. In adopting that resolution the General Conference recognized that compliance with regulations that take account of the IAEA Regulations for the Safe Transport of Radioactive Material (the IAEA Transport Regulations) is providing a high level of safety during the transport of radioactive material. Good compliance requires that the regulations are implemented effectively. The General Conference therefore requested the IAEA Secretariat to provide a service for carrying out, at the request of any State, an appraisal of the implementation of the Transport Regulations by that State. In response to this request the Director General of the IAEA offered such an appraisal service to all States in letter J1.01.Circ, dated 10 December 1998. The first Transport Safety Appraisal Service (TranSAS) was undertaken and completed at the request of Slovenia in 1999. A report on the results of that appraisal was published and released for general distribution in the early fall of 1999. In each of the General Conferences since 1998, resolutions focused on transport safety have commended the Secretariat for establishing the TranSAS, commended those States that have requested the appraisal service and encouraged other States to avail themselves of this service see GC(43)/RES/11, GC(44)/RES/17, GC(45)/RES/10, GC(46)/RES/9 and GC(47)/RES/7. Six appraisals have been carried out to date as follows: Slovenia, Brazil, United Kingdom, Turkey, Panama and France. This presentation provides an overview of the Transport Safety Appraisal Service and summarizes the major findings from

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

1 janv. 2006 ... Environmental Regulation and Food Safety intéressera les artisans des politiques et les ONG , les chercheurs et les spécialistes de l'économie ... This funding will help strengthen the Science, Technology and Innovation Policy Research Organization's (STIPRO) role as a credible public policy institution in ...

Safety management and control policy. A study of the safety regulation of offshore oil activity by the Norwegian Petroleum Directorate. Sikkerhetsstyring og reguleringsteknikk. Oljedirektoratets regulering av sikkerheten ved produksjon av petroleum

Energy Technology Data Exchange (ETDEWEB)

Graver, H P

1983-01-01

The Norwegian Petroleum Directorate (NPD) is the main administrative body with responsibility to regulate and control the safety aspects of drilling for and production of petroleum on the Norwegian Continental Shelf. Its responsibility does not, however, include the aspects of maritime safety, which are regulated by the Norwegian Maritime Directorate. This study is limited to the regulation of safety on fixed installations for production of petroleum. The object has been to describe the methods applied by the NPD to achieve better safety, and to give answers to why these specific methods of approach have developed as they have. A conclusion that may be drawn from this study is that there exists a relationship of close cooperation between the NPD and the oil industry represented by the operating companies. Only this can explain the differences we find in the NPD approach as compared to the approach of other parts of public administration. Such a relationship probably leads to better safety within the scope of technical rationality than would have a more hostile relationship between the Directorate and the industry. This has its price, however. Aspects of the safety question not included within the limits of a purely technical approach are not as easily taken into account. Partly due to this fact, other parties with interests in safety are not represented.

Safety regulation : The lessons of workplace safety rule management for managing the regulatory burden

NARCIS (Netherlands)

Hale, A.R.; Borys, D.; Adams, M.

2012-01-01

There is a strong political consensus in a number of countries that occupational safety and health regulation is stifling industrial innovation and development and is feeding a culture of damaging risk aversion and petty bureaucracy. In a number of countries this has led to proposals to repeal

Generally Recognized as Safe: Uncertainty Surrounding E-Cigarette Flavoring Safety

OpenAIRE

Sears, Clara G.; Hart, Joy L.; Walker, Kandi L.; Robertson, Rose Marie

2017-01-01

Despite scientific uncertainty regarding the relative safety of inhaling e-cigarette aerosol and flavorings, some consumers regard the U.S. Food and Drug Administration’s “generally recognized as safe” (GRAS) designation as evidence of flavoring safety. In this study, we assessed how college students’ perceptions of e-cigarette flavoring safety are related to understanding of the GRAS designation. During spring 2017, an online questionnaire was administered to college students. Chi-square p-v...

Co-operative development of nuclear safety regulations, guides and standards based on NUSS

International Nuclear Information System (INIS)

Pachner, J.; Boyd, F.C.; Yaremy, E.M.

1985-01-01

A major need of developing Member States building nuclear power plants (NPPs) of foreign origin is to acquire a capability to regulate such nuclear plants independently. Among other things, this requires the development of national nuclear safety regulations, guides and standards to govern the development and use of nuclear technology. Recognizing the importance and complexity of this task, it seems appropriate that the NPP-exporting Member States share their experience and assist the NPP-importing Member States in the development of their national regulations and guides. In 1983, the Atomic Energy Control Board and Atomic Energy of Canada Ltd. conducted a study of a possible joint programme involving Canada, an NPP-importing Member State and the IAEA for the development of the national nuclear safety regulations and guides based on NUSS documents. During the study, a work plan with manpower estimates for the development of design regulations, safety guides and a guide for regulatory evaluation of design was prepared as an investigatory exercise. The work plan suggests that a successful NUSS implementation in developing Member States will require availability of significant resources at the start of the programme. The study showed that such a joint programme could provide an effective mechanism for transfer of nuclear safety know-how to the developing Member States through NUSS implementation. (author)

Ionising radiation: a guide to the Regulations

International Nuclear Information System (INIS)

Hughes, Donald.

1986-01-01

The author explains the basic requirements on health and safety personnel in relation to the Ionising Radiations Regulations 1985. The outline paper is presented under the following headings: Dose assessment, Interpretation and general regulations 1-5, Dose limitation regulations 6 and 7, Regulation of work - regulations 8-12, Dosimetry and medical surveillance - regulations 13-17, summary of records to be kept, entry to controlled areas, Control of radioactive substances -regulations 18-23, Monitoring of radiation regulation 24, Assessments and notifications - regulations 25-31, Safety of articles and equipment - regulations 32-34, Other guidance. (U.K.)

Radiation sources safety and radioactive materials security regulation in Ukraine

International Nuclear Information System (INIS)

Smyshliaiev, A.; Holubiev, V.; Makarovska, O.

2001-01-01

Radiation sources are widely used in Ukraine. There are about 2500 users in industry, science, education and about 2800 in medicine. About 80,000 sealed radiation sources with total kerma-equivalent of 450 Gy*M 2 /sec are used in Ukraine. The exact information about the radiation sources and their users will be provided in 2001 after the expected completion of the State inventory of radiation sources in Ukraine. In order to ensure radiation source safety in Ukraine, a State System for regulation of activities dealing with radiation sources has been established. The system includes the following elements: establishment of norms, rules and standards of radiation safety; authorization activity, i.e. issuance of permits (including those in the form of licences) for activities dealing with radiation sources; supervisory activity, i.e. control over observance of norms, rules and standards of radiation safety and fulfilment of conditions of licences for activities dealing with radiation sources, and also enforcement. Comprehensive nuclear legislation was developed and implemented from 1991 to 2000. Radiation source safety is regulated by three main nuclear laws in Ukraine: On the use of nuclear energy and radiation safety (passed on 8 February 1995); On Human Protection from Impact of Ionizing Radiation (passed on 14 January 1998); On permissive activity in the area of nuclear energy utilization (passed on 11 January 2000). The regulatory authorities in Ukraine are the Ministry for Ecology and Natural Resources (Nuclear Regulatory Department) and the Ministry of Health (State sanitary-epidemiology supervision). According to the legislation, activities dealing with radiation sources are forbidden without an officially issued permit in Ukraine. Permitted activities with radiation sources are envisaged: licensing of production, storage and maintenance of radiation sources; licensing of the use of radiation sources; obligatory certification of radiation sources and transport

16 CFR 1101.41 - Generally.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Generally. 1101.41 Section 1101.41 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INFORMATION... court; (2) Information about a product which the Commission has reasonable cause to believe is in...

Recommended general safety requirements for nuclear power plants

International Nuclear Information System (INIS)

1983-06-01

This report presents recommendations for a set of general safety requirements that could form the basis for the licensing of nuclear power plants by the Atomic Energy Control Board. In addition to a number of recommended deterministic requirements the report includes criteria for the acceptability of the design of such plants based upon the calculated probability and consequence (in terms of predicted radiation dose to members of the public) of potential fault sequences. The report also contains a historical review of nuclear safety principles and practices in Canada

Preparing Safety Cases for Operating Outside Prescriptive Fatigue Risk Management Regulations.

Science.gov (United States)

Gander, Philippa; Mangie, Jim; Wu, Lora; van den Berg, Margo; Signal, Leigh; Phillips, Adrienne

2017-07-01

Transport operators seeking to operate outside prescriptive fatigue management regulations are typically required to present a safety case justifying how they will manage the associated risk. This paper details a method for constructing a successful safety case. The method includes four elements: 1) scope (prescriptive rules and operations affected); 2) risk assessment; 3) risk mitigation strategies; and 4) monitoring ongoing risk. A successful safety case illustrates this method. It enables landing pilots in 3-pilot crews to choose the second or third in-flight rest break, rather than the regulatory requirement to take the third break. Scope was defined using a month of scheduled flights that would be covered (N = 4151). These were analyzed in the risk assessment using existing literature on factors affecting fatigue to estimate the maximum time awake at top of descent and sleep opportunities in each break. Additionally, limited data collected before the new regulations showed that pilots flying at landing chose the third break on only 6% of flights. A prospective survey comparing subjective reports (N = 280) of sleep in the second vs. third break and fatigue and sleepiness ratings at top of descent confirmed that the third break is not consistently superior. The safety case also summarized established systems for fatigue monitoring, risk assessment and hazard identification, and multiple fatigue mitigation strategies that are in place. Other successful safety cases have used this method. The evidence required depends on the expected level of risk and should evolve as experience with fatigue risk management systems builds.Gander P, Mangie J, Wu L, van den Berg M, Signal L, Phillips A. Preparing safety cases for operating outside prescriptive fatigue risk management regulations. Aerosp Med Hum Perform. 2017; 88(7):688-696.

General safety aspects

International Nuclear Information System (INIS)

1998-01-01

In this part next aspects are described: (1) Priority to safety; (2) Financial and human resources;; (3) Human factor; (4) Operator's quality assurance system; (5) Safety assessment and Verification; (6) Radiation protection and (7) Emergency preparedness

Regulation and safety implementation of nanotechnology for chemical enterprises in the Central Europe Space

International Nuclear Information System (INIS)

Falk, A; Hartl, S; Sinner, F

2013-01-01

As result of the gradually increasing nanotechnology sector there is the necessity of a contemporary analysis of the present regulations used for nanomaterials, to outline the current situation of the nanotechnology sector, to promote international cooperation and research's coordination to overcome disciplinary boundaries, to fill the gap between more and less experienced regions and to turn investments in R and D in industrial innovations. The general objective of the Central Europe project NANOFORCE, which is developed by national and regional chemistry associations and R and D Centres of the Central Europe area, is to foster the innovative nanotechnology-sector networks across Central Europe regions by bringing together public and private organizations to carry out collaborative and interdisciplinary researches on nanomaterials (in the frame of REACH Regulation) and to turn the most promising laboratory results into innovative industrial applications. To build up a legal advisory board for chemical enterprises starting in nanotechnology, a state of the art report on existing safety procedures and nanotech related regulations was produced to give an overview on currently available regulations used by chemical industries and manufacturing companies within the European region to secure their products. The main emphasis was placed on REACH regulation to search for relevant sections concentrating on nanomaterials which are applicable for nanotechnology. In addition, all relevant directives and amendments of REACH were screened with regard to identify gaps where action is still needed and give possible recommendations for the European Commission. Beyond literature research a questionnaire for producers, users, researchers and financiers was developed with the goal to collect information about the nanotechnology sector in the CE region concerning development, financial status, and international cooperation within joint ventures, safety and nanotoxicology.

Challenges in developing competency-based training curriculum for food safety regulators in India

Directory of Open Access Journals (Sweden)

Anitha Thippaiah

2014-01-01

Full Text Available Context: The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. Aims: 1 Identify the competencies needed among the food regulatory workforce in India. 2 Develop a competency-based training curriculum for food safety regulators in the country. 3 Develop training materials for use to train the food regulatory workforce. Settings and Design: The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. Materials and Methods: A competency-based training needs assessment was conducted before undertaking the development of the training materials. Results: The training program for Food Safety Officers was designed to comprise of five modules to include: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level, II and III (Retail/ Catering/ Manufacturing were primarily designed for training of food handlers and are part of essential reading for food safety regulators. Conclusion: The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting.

Attitude and awareness of general dental practitioners toward radiation hazards and safety.

Science.gov (United States)

Aravind, B S; Joy, E Tatu; Kiran, M Shashi; Sherubin, J Eugenia; Sajesh, S; Manchil, P Redwin Dhas

2016-10-01

The aim and objective is to evaluate the level of awareness and attitude about radiation hazards and safety practices among general dental practitioners in Trivandrum District, Kerala, India. A questionnaire-based cross-sectional study was conducted among 300 general dental practitioners in Trivandrum District, Kerala, India. Postanswering the questions, a handout regarding radiation safety and related preventive measures was distributed to encourage radiation understanding and protection. Statistical analysis were done by assessing the results using Chi-square statistical test, t -test, and other software (Microsoft excel + SPSS 20.0 trail version). Among 300 general practitioners (247 females and 53 males), 80.3% of the practitioners were found to have a separate section for radiographic examination in their clinics. Intraoral radiographic machines were found to be the most commonly (63.3%) used radiographic equipment while osteoprotegerin was the least (2%). Regarding the practitioner's safety measures, only 11.7% of them were following all the necessary steps while 6.7% clinicians were not using any safety measure in their clinic, and with respect to patient safety, only 9.7% of practitioners were following the protocol. The level of awareness of practitioners regarding radiation hazards and safety was found to be acceptable. However, implementation of their knowledge with respect to patient and personnel safety was found wanting. Insisting that they follow the protocols and take necessary safety measures by means of continuing medical education programs, pamphlets, articles, and workshops is strongly recommended.

Effects of a team-based assessment and intervention on patient safety culture in general practice

DEFF Research Database (Denmark)

Hoffmann, B; Müller, V; Rochon, J

2014-01-01

Background: The measurement of safety culture in healthcare is generally regarded as a first step towards improvement. Based on a self-assessment of safety culture, the Frankfurt Patient Safety Matrix (FraTrix) aims to enable healthcare teams to improve safety culture in their organisations....... In this study we assessed the effects of FraTrix on safety culture in general practice. Methods: We conducted an open randomised controlled trial in 60 general practices. FraTrix was applied over a period of 9 months during three facilitated team sessions in intervention practices. At baseline and after 12...... months, scores were allocated for safety culture as expressed in practice structure and processes (indicators), in safety climate and in patient safety incident reporting. The primary outcome was the indicator error management. Results: During the team sessions, practice teams reflected on their safety...

Nuclear safety: an international approach: the convention on nuclear safety

International Nuclear Information System (INIS)

Rosen, M.

1994-01-01

This paper is a general presentation of the IAEA Convention on Nuclear Safety which has already be signed by 50 countries and which is the first legal instrument that directly addresses the safety of nuclear power plants worldwide. The paper gives a review of its development and some key provisions for a better understanding of how this agreement will operate in practice. The Convention consists of an introductory preamble and four chapters consisting of 35 articles dealing with: the principal objectives, definitions and scope of application; the various obligations (general provisions, legislation, responsibility and regulation, general safety considerations taking into account: the financial and human resources, the human factors, the quality assurance, the assessment and verification of safety, the radiation protection and the emergency preparedness; the safety of installations: sitting, design and construction, operation); the periodic meetings of the contracting parties to review national reports on the measures taken to implement each of the obligations, and the final clauses and other judicial provisions common to international agreements. (J.S.). 1 append

Safety of research reactors - A regulator's perspective

International Nuclear Information System (INIS)

Rahman, M.S.

2001-01-01

Due to historical reasons research reactors have received less regulatory attention in the world than nuclear power plants. This has given rise to several safety issues which, if not addressed immediately, may result in an undesirable situation. However, in Pakistan, research reactors and power reactors have received due attention from the regulatory authority. The Pakistan Research Reactor-1 has been under regulatory surveillance since 1965, the year of its commissioning. The second reactor has also undergone all the safety reviews and checks mandated by the licensing procedures. A brief description of the regulatory framework, the several safety reviews carried out have been briefly described in this paper. Significant activities of the regulatory authority have also been described in verifying the safety of research reactors in Pakistan along with the future activities. The views of the Pakistani regulatory authority on the specific issues identified by the IAEA have been presented along with specific recommendations to the IAEA. We are of the opinion that there are more Member States operating nuclear research reactors than nuclear power plants. Therefore, there should be more emphasis on the research reactor safety, which somehow has not been the case. In several recommendations made to the IAEA on the specific safety issues the emphasis has been, in general, to have a similar documentation and approach for maintaining and verifying operational safety at research reactors as is currently available for nuclear power reactors and may be planned for nuclear fuel cycle facilities. (author)

Review of the regulation and safety assessment of food substances in various countries and jurisdictions

Science.gov (United States)

Magnuson, Bernadene; Munro, Ian; Abbot, Peter; Baldwin, Nigel; Lopez-Garcia, Rebeca; Ly, Karen; McGirr, Larry; Roberts, Ashley; Socolovsky, Susan

2013-01-01

This review compares the regulations, definitions and approval processes for substances intentionally added to or unintentionally present in human food in the following specific countries/jurisdictions: Argentina, Australia, Brazil, Canada, China, the European Union, Japan, Mexico, New Zealand, and the United States. This includes direct food additives, food ingredients, flavouring agents, food enzymes and/or processing aids, food contact materials, novel foods, and nanoscale materials for food applications. The regulatory authority of each target jurisdiction/country uses its own regulatory framework and although the definitions, regulations and approval processes may vary among all target countries, in general there are many similarities. In all cases, the main purpose of each authority is to establish a regulatory framework and maintain/enforce regulations to ensure that food consumed and sold within its respective countries is safe. There is a move towards harmonisation of food regulations, as illustrated by Australia and New Zealand and by Mercosur. The European Union has also established regulations, which are applicable for all member states, to establish a common authorisation procedure for direct food additives, flavourings and enzymes. Although the path for approval of different categories of food additives varies from jurisdiction to jurisdiction, there are many commonalities in terms of the data requirements and considerations for assessment of the safety of use of food additives, including the use of positive lists of approved substances, pre-market approval, and a separation between science and policy decisions. The principles applied are largely reflective of the early work by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) committees and JECFA assessments of the safety of food additives for human and animal foods. PMID:23781843

JICST Factual DatabaseJICST Chemical Substance Safety Regulation Database

Science.gov (United States)

Abe, Atsushi; Sohma, Tohru

JICST Chemical Substance Safety Regulation Database is based on the Database of Safety Laws for Chemical Compounds constructed by Japan Chemical Industry Ecology-Toxicology & Information Center (JETOC) sponsored by the Sience and Technology Agency in 1987. JICST has modified JETOC database system, added data and started the online service through JOlS-F (JICST Online Information Service-Factual database) in January 1990. JICST database comprises eighty-three laws and fourteen hundred compounds. The authors outline the database, data items, files and search commands. An example of online session is presented.

10 CFR Appendix A to Subpart B of... - General Statement of Safety Basis Policy

Science.gov (United States)

2010-01-01

... at all levels. Performing work in accordance with the safety basis for a nuclear facility is the..., safety, and health into work planning and execution (48 CFR 970.5223-1, Integration of Environment, Safety and Health into Work Planning and Execution) and the DEAR clause on laws, regulations, and DOE...

New set of Chemical Safety rules

CERN Multimedia

HSE Unit

2011-01-01

A new set of four Safety Rules was issued on 28 March 2011: Safety Regulation SR-C ver. 2, Chemical Agents (en); General Safety Instruction GSI-C1, Prevention and Protection Measures (en); General Safety Instruction GSI-C2, Explosive Atmospheres (en); General Safety Instruction GSI-C3, Monitoring of Exposure to Hazardous Chemical Agents in Workplace Atmospheres (en). These documents form part of the CERN Safety Rules and are issued in application of the “Staff Rules and Regulations” and of document SAPOCO 42. These documents set out the minimum requirements for the protection of persons from risks to their occupational safety and health arising, or likely to arise, from the effects of hazardous chemical agents that are present in the workplace or used in any CERN activity. Simultaneously, the HSE Unit has published seven Safety Guidelines and six Safety Forms. These documents are available from the dedicated Web page “Chemical, Cryogenic and Biological Safety&...

77 FR 6007 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

Science.gov (United States)

2012-02-07

...] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation... they could be published in the Federal Register. This notice lists temporary safety zones, security... the safety and security needs within their jurisdiction; therefore, District Commanders and COTPs have...

Regulations for ionizing radiation protection

International Nuclear Information System (INIS)

1999-01-01

General regulations and principles of radiation protection and safety are presented. In addition, the regulations for licensing and occupational and medical exposure as well as for safe transport of radioactive materials and wastes are given

33 CFR 165.117 - Regulated Navigation Areas, Safety and Security Zones: Deepwater Ports, First Coast Guard District.

Science.gov (United States)

2010-07-01

..., Safety and Security Zones: Deepwater Ports, First Coast Guard District. 165.117 Section 165.117... Limited Access Areas First Coast Guard District § 165.117 Regulated Navigation Areas, Safety and Security... section are designated as regulated navigation areas. (2) Safety and security zones. All waters within a...

International experts conclude IAEA peer review of Iran's safety regulation of Bushehr NPP

International Nuclear Information System (INIS)

2010-01-01

Full text: An international team of nuclear safety experts today completed an IAEA mission to review the effectiveness of Iran's safety regulation of its first nuclear power plant and to identify possible improvements before the plant begins operation. Upon invitation of the Islamic Republic of Iran, the International Atomic Energy Agency (IAEA) assembled a team of senior regulators from seven Member States for an Integrated Regulatory Review Service (IRRS) mission. The scope of the mission was limited to the safety regulation of Bushehr nuclear power plant (BNPP-1). The IRRS review took place from 20 February to 2 March at the INRA offices in Tehran and included a technical visit to the BNPP-1 site. The mission was an objective peer review based on IAEA safety standards, and was neither an inspection, nor an audit. Ms. Olena Mykolaichuk, IRRS Team Leader and Head of the State Nuclear Regulatory Committee of Ukraine, commended her INRA counterparts: 'The regulatory work performed on the Bushehr construction and in preparation for commissioning has demonstrated significant progress of INRA as a nuclear regulatory authority,' she said. Philippe Jamet, Director of the IAEA's Nuclear Installation Safety Division, added: 'Through this IRRS mission, both Iran and the international experts contribute to the enhancement of nuclear safety and worldwide experience sharing.' In the course of its review the IRRS team identified the following strengths: - INRA has a dedicated, conscientious staff, demonstrating clear commitments to further improvements. - INRA clearly recognizes the value of peer reviews and international cooperation regarding nuclear safety. - Despite a shortage of staff, INRA demonstrated strong leadership while performing both review and assessment and inspection tasks during the BNPP-1 construction and pre-commissioning. - INRA has developed an excellent computerized documentation control system. Recommendations and suggestions to improve INRA's regulatory

Regulation of Aging Power Plants: Ensuring Safety in a Changing Environment

International Nuclear Information System (INIS)

Jackson, S.A.

1999-01-01

In her keynote address to the Plim and Plex 1997 Conference, Dr. Jackson, President of the US Nuclear Regulatory Commission, dealt with four problem areas: (i) the development and application of safety margins; (ii) aging mechanisms and the use of inspection and testing methods; (iii) the U. S. licence renewal process; and (iv) risk-informed, performance-based regulation. Aging effects can further complicate existing interactions between 'explicit' and 'implicit' safety margins. Attempting to satisfy these combined margins can have a significant technical and financial impact on the plant operator. Aging degradation affects a broad range of plant systems, structures and components. Inspection and testing methods are improved continually, but development of methods for direct measuring of material properties on a more microscopic level together with elaboration of more precise predictive models of aging is still needed. In the U. S., the decision on whether to seek licence renewal rests with the licensee. The NRC task is to establish a reasonable process and clear safety standards. License renewal (extension of a NPP 40-years operating licence for additional 20 years) is explicitly allowed in NRS regulations in 10 CFR Part 54. In the U. S. nuclear power industry, there is considerable interest in licence renewal. A 'risk informed' approach to regulation means that, in the decision-making, the risk information is considered along with other factors. Performance-based regulation is, by definition, results focused; its essential component is the feedback of operating experience into subsequent evaluation. When the results focus is linked to risk analysis and ranking, the result is risk-informed, performance-based regulation. The NRS applies this combined approach in all its activities and, also, in its collaborative programs with the nuclear power industry. At the threshold of the 21st century, the nuclear power industry faces an array of challenges and opportunities

Leadership and Management for Safety. General Safety Requirements

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factor, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations (registrants and licensees) and other organizations concerned with facilities and activities that give rise to radiation risks

Regulation of chemical safety at fuel cycle facilities by the United States Nuclear Regulatory Commission

International Nuclear Information System (INIS)

Ramsey, Kevin M.

2013-01-01

When the U.S. Nuclear Regulatory Commission (NRC) was established in 1975, its regulations were based on radiation dose limits. Chemical hazards rarely influenced NRC regulations. After the Three Mile Island reactor accident in 1979, the NRC staff was directed to address emergency planning at non-reactor facilities. Several fuel cycle facilities were ordered to submit emergency plans consistent with reactor emergency plans because no other guidance was available. NRC published a notice that it was writing regulations to codify the requirements in the Orders and upgrade the emergency plans to address all hazards, including chemical hazards. The legal authority of NRC to regulate chemical safety was questioned. In 1986, an overfilled uranium hexafluoride cylinder ruptured and killed a worker. The NRC staff was directed to address emergency planning for hazardous chemicals in its regulations. The final rule included a requirement for fuel cycle facilities to certify compliance with legislation requiring local authorities to establish emergency plans for hazardous chemicals. As with emergency planning, NRC's authority to regulate chemical safety during routine operations was limited. NRC established memoranda of understanding (MOUs) with other regulatory agencies to encourage exchange of information between the agencies regarding occupational hazards. In 2000, NRC published new, performance-based, regulations for fuel cycle facilities. The new regulations required an integrated safety analysis (ISA) which used quantitative standards to assess chemical exposures. Some unique chemical exposure cases were addressed while implementing the new regulations. In addition, some gaps remain in the regulation of hazardous chemicals at fuel cycle facilities. The status of ongoing efforts to improve regulation of chemical safety at fuel cycle facilities is discussed. (authors)

76 FR 70342 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

Science.gov (United States)

2011-11-14

...] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation... published in the Federal Register. This notice lists temporary safety zones, security zones, special local... Commanders and Captains of the Port (COTP) must be immediately responsive to the safety and security needs...

The Inspector General's report on Nuclear Safety and Radiation Protection 2008

International Nuclear Information System (INIS)

2009-01-01

This report, written for the Chairman of EDF, gives the Inspector General's assessment of nuclear safety and radiation protection within the EDF Group. The report is also intended for all those in the company who contribute in any way to nuclear safety and radiation protection through their day-to-day actions and decisions. It also aims to identify any early warning signs and recommend areas for improvement. It therefore focuses on difficulties and weaknesses rather than strengths and progress. It is based on information gathered and observations made during the year, both in France and the UK, whether from workers in the field, or during visits to plants and meetings with the main stakeholders: managers, staff representatives, members of the medical profession, chairmen of local information commissions in France and of Site stakeholder groups (British equivalent of the French Local Information Commissions) in the UK, and contractors. It also makes use of visits and comparisons with other international players on the nuclear scene, and of dialogue with WANO (World Association of Nuclear Operators) and the nuclear safety authorities. Content: 1 - the Inspector General's analysis and conclusions at the end of 2008; 2 - Nuclear safety management; 3 - Radiation protection; 4 - A changing relationship with the nuclear safety authority; 5 - Support for the nuclear plants in service; 6 - Succeeding with the EPR; 7 - Operating the installations for longer; 8 - Further opening up to the outside world; 9 - Renewal of skills; 10 - Labour relations; 11 - The driving forces of cultural change; 12 - Promote change and regulate its pace; 13 - The contribution of the medical staff; 14 - Relations with contractors; 15 - The fire hazard; 16 - Nuclear fuel; 17 - Decommissioning; 18 - Emergency response management; 19 - Events at EDF; 19.1 - The Tricastin nuclear power plant fuel assemblies; 19.2 - Steam generator behaviour; 19.3 - Reactor building evacuation; 20 - Visits

41 CFR 105-1.101 - General Services Administration Property Management Regulations.

Science.gov (United States)

2010-07-01

...-INTRODUCTION 1.1-Regulations System § 105-1.101 General Services Administration Property Management Regulations... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false General Services Administration Property Management Regulations. 105-1.101 Section 105-1.101 Public Contracts and Property...

General aviation crash safety program at Langley Research Center

Science.gov (United States)

Thomson, R. G.

1976-01-01

The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.

Sor/88-391, 21 July 1988, uranium mines (Ontario) occupational health and safety regulations, amendment

International Nuclear Information System (INIS)

1988-08-01

These Regulations (SOR/84-435) were made to establish uniformity in the laws governing occupational health and safety in mines in the Province of Ontario. To ensure conformity, the legal references in the Regulations have been amended to accord with the 1987 amendment of the Ontario Occupational Health and Safety Act [fr

Coal Mine Health and Safety Regulation 2006 under the Coal Mine Health and Safety Act 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-12-22

The aim of the Act is to secure the health, safety and welfare of people in connection with coal operations (which include all places of work where coal is mined and certain other places). The Regulation contains provisions about the following matters: (a) places of work to which the Act does not apply, (b) duties relating to health, welfare and safety at coal operations, including the following: (i) the nomination of the operator of a coal operation and the provision of health and safety information for incoming operators, (ii) the contents of health and safety management systems for coal operations, (iii) major hazards and the contents of major hazard management plans for coal operations, (iv) duties relating to contractors, (v) the contents of management structures and emergency management systems for coal operations, escape and rescue plans and fire fighting plans and high risk activities, (c) notifications, including (i) notification of incidents, (ii) inquiries, (iii) notification of other matters to the Chief Inspector), (d) aspects of safety at coal operations, including the following: (i) controlled materials, plants and practices, (ii) coal dust explosion prevention and suppression, (iii) ventilation at coal operations, (iv) escape from coal operations, (v) the operation of transport at coal operations, (vi) surveys and certified plans, (vii) employment at coal operations, (e) the licensing of certain activities, (f) competence standards, (g) the Coal Competence Board, (h) check inspectors, (i) exemptions from provisions of this Regulation, (j) the following miscellaneous matters concerning coal mine health and safety: (i) the keeping of records and reporting, (ii) penalties, the review of decisions by the Administrative Decisions Tribunal, fees and charges, consultation, information and other miscellaneous matters, (k) savings and transitional provisions.

The role of the regulator in promoting and evaluating safety culture. Operating experience feedback programme approach

International Nuclear Information System (INIS)

Perez, S.

2002-01-01

Promoting and Evaluating Safety Culture (S.C.) in Operating Organizations must be one of the main Nuclear Regulator goals to achieve. This can be possible only if each and every one of the regulatory activities inherently involves S.C. It can be seen throughout attitudes, values, uses and practices in both individuals and the whole regulatory organization. One among all the regulatory tools commonly used by regulators to promote and evaluate the commitment of the licensees with safety culture as a whole involves organizational factors and particular attention is directed to the operating organization. This entailed a wide range of activities, including all those related with management of safety performance. Operating Experience Feedback Programme as a tool to enhance safety operation is particularly useful for regulators in the evaluation of the role of S.C. in operating organization. Safety Culture is recognized as a subset of the wider Organizational Culture. Practices that improve organizational effectiveness can also contribute to enhance safety. An effective event investigation methodology is a specific practice, which contributes to a healthy Safety Culture. (author)

Implications of the accident at Chernobyl for safety regulation of commercial nuclear power plants in the United Sates: Volume 2, Appendix - Public comments and their disposition: Final report

International Nuclear Information System (INIS)

1989-04-01

This report was prepared by the Nuclear Regulatory Commission (NRC) staff to assess the implications of the accident at the Chernobyl nuclear power plant as they relate to reactor safety regulation for commercial nuclear power plants in the United States. The facts used in this assessment have been drawn from the US fact-finding report(NUREG-1250) and its sources. The general conclusions of the document are that there are generic lessons to be learned but that no changes in regulations are needed due to the substantial differences in the design, safety features and operation of US plants as compared to those in the USSR. Given these general conclusions, further consideration of certain specific areas is recommended by the report. These include: administrative controls over reactor regulation, reactivity accidents, accidents at low or zero power, multi-unit protection, fires, containment, emergency planning, severe accident phenomena, and graphite-moderated reactors

Safety Evaluation Report related to the renewal of the operating license for the General Electric-Nuclear Test Reactor (GE-NTR) (Docket No. 50-73)

International Nuclear Information System (INIS)

1984-09-01

This Safety Evaluation Report for the application filed by the General Electric Company (GE) for a renewal license number R-33 to continue to operate its research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by GE and is located in Pleasanton, California. The staff concludes that the reactor can continue to be operated by GE without endangering the health and safety of the public

General re-evaluation of the safety on the nuclear ship 'Mutsu' and its repair work

International Nuclear Information System (INIS)

1980-01-01

According to the proposition by the Committee for Investigation Radiation Leak on Mutsu, the works of the general re-evaluation of safety were started after the approval by the Committee for Investigating General Re-evaluation and Repair Techniques for Mutsu. The contents of the general re-evaluation of safety are the inspection of the machines and equipments in the nuclear reactor plant, the review of the design of the nuclear reactor plant, the analysis of the nuclear reactor plant behavior in accidents, and the related experimental researches. These works have been carried out for five years, and problem did not arise at all regarding the nuclear reactor so far, but from the viewpoint of improving the safety and reliability further, it was decided to carry out the repair work based on the general re-evaluation of safety. The contents of the repair work are the improvement of the emergency core-cooling system, the improvement of the safety protection system, the improvement of the radiation monitoring equipments, the improvement of the containment vessel boundary, the improvement of the actuators for technological safety facilities, the improvement of the method controlling secondary water quality, and other repair works. The progress of the general re-evaluation of safety is reported. (Kako, I.)

Safety assessment for facilities and activities. General safety requirements. Pt. 4

International Nuclear Information System (INIS)

2009-01-01

The Safety Fundamentals publication, Fundamental Safety Principles, establishes principles for ensuring the protection of workers, the public and the environment, now and in the future, from harmful effects of ionizing radiation. The objective of this Safety Requirements publication is to establish the generally applicable requirements to be fulfilled in safety assessment for facilities and activities, with special attention paid to defence in depth, quantitative analyses and the application of a graded approach to the ranges of facilities and of activities that are addressed. The publication also addresses the independent verification of the safety assessment that needs to be carried out by the originators and users of the safety assessment. This publication is intended to provide a consistent and coherent basis for safety assessment across all facilities and activities, which will facilitate the transfer of good practices between organizations conducting safety assessments and will assist in enhancing the confidence of all interested parties that an adequate level of safety has been achieved for facilities and activities. The requirements, which are derived from the Fundamental Safety Principles, relate to any human activity that may cause people to be exposed to radiation risks arising from facilities and activities, as follows: Facilities includes: (a) Nuclear power plants; (b) Other reactors (such as research reactors and critical assemblies); (c) Enrichment facilities and fuel fabrication facilities; (d) Conversion facilities used to generate UF 6 ; (e) Storage and reprocessing plants for irradiated fuel; (f) Facilities for radioactive waste management where radioactive waste is treated, conditioned, stored or disposed of; (g) Any other places where radioactive materials are produced, processed, used, handled or stored; (h) Irradiation facilities for medical, industrial, research and other purposes, and any places where radiation generators are installed; (i

Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

International Nuclear Information System (INIS)

2009-01-01

The Safety Fundamentals publication, Fundamental Safety Principles, establishes principles for ensuring the protection of workers, the public and the environment, now and in the future, from harmful effects of ionizing radiation. The objective of this Safety Requirements publication is to establish the generally applicable requirements to be fulfilled in safety assessment for facilities and activities, with special attention paid to defence in depth, quantitative analyses and the application of a graded approach to the ranges of facilities and of activities that are addressed. The publication also addresses the independent verification of the safety assessment that needs to be carried out by the originators and users of the safety assessment. This publication is intended to provide a consistent and coherent basis for safety assessment across all facilities and activities, which will facilitate the transfer of good practices between organizations conducting safety assessments and will assist in enhancing the confidence of all interested parties that an adequate level of safety has been achieved for facilities and activities. The requirements, which are derived from the Fundamental Safety Principles, relate to any human activity that may cause people to be exposed to radiation risks arising from facilities and activities, as follows: Facilities includes: (a) Nuclear power plants; (b) Other reactors (such as research reactors and critical assemblies); (c) Enrichment facilities and fuel fabrication facilities; (d) Conversion facilities used to generate UF6; (e) Storage and reprocessing plants for irradiated fuel; (f) Facilities for radioactive waste management where radioactive waste is treated, conditioned, stored or disposed of; (g) Any other places where radioactive materials are produced, processed, used, handled or stored; (h) Irradiation facilities for medical, industrial, research and other purposes, and any places where radiation generators are installed; (i

Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

International Nuclear Information System (INIS)

2010-01-01

The Safety Fundamentals publication, Fundamental Safety Principles, establishes principles for ensuring the protection of workers, the public and the environment, now and in the future, from harmful effects of ionizing radiation. The objective of this Safety Requirements publication is to establish the generally applicable requirements to be fulfilled in safety assessment for facilities and activities, with special attention paid to defence in depth, quantitative analyses and the application of a graded approach to the ranges of facilities and of activities that are addressed. The publication also addresses the independent verification of the safety assessment that needs to be carried out by the originators and users of the safety assessment. This publication is intended to provide a consistent and coherent basis for safety assessment across all facilities and activities, which will facilitate the transfer of good practices between organizations conducting safety assessments and will assist in enhancing the confidence of all interested parties that an adequate level of safety has been achieved for facilities and activities. The requirements, which are derived from the Fundamental Safety Principles, relate to any human activity that may cause people to be exposed to radiation risks arising from facilities and activities, as follows: Facilities includes: (a) Nuclear power plants; (b) Other reactors (such as research reactors and critical assemblies); (c) Enrichment facilities and fuel fabrication facilities; (d) Conversion facilities used to generate UF6; (e) Storage and reprocessing plants for irradiated fuel; (f) Facilities for radioactive waste management where radioactive waste is treated, conditioned, stored or disposed of; (g) Any other places where radioactive materials are produced, processed, used, handled or stored; (h) Irradiation facilities for medical, industrial, research and other purposes, and any places where radiation generators are installed; (i

Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

International Nuclear Information System (INIS)

2009-01-01

The Safety Fundamentals publication, Fundamental Safety Principles, establishes principles for ensuring the protection of workers, the public and the environment, now and in the future, from harmful effects of ionizing radiation.? read more The objective of this Safety Requirements publication is to establish the generally applicable requirements to be fulfilled in safety assessment for facilities and activities, with special attention paid to defence in depth, quantitative analyses and the application of a graded approach to the ranges of facilities and of activities that are addressed. The publication also addresses the independent verification of the safety assessment that needs to be carried out by the originators and users of the safety assessment. This publication is intended to provide a consistent and coherent basis for safety assessment across all facilities and activities, which will facilitate the transfer of good practices between organizations conducting safety assessments and will assist in enhancing the confidence of all interested parties that an adequate level of safety has been achieved for facilities and activities. The requirements, which are derived from the Fundamental Safety Principles, relate to any human activity that may cause people to be exposed to radiation risks arising from facilities and activities, as follows: Facilities includes: (a) Nuclear power plants; (b) Other reactors (such as research reactors and critical assemblies); (c) Enrichment facilities and fuel fabrication facilities; (d) Conversion facilities used to generate UF6; (e) Storage and reprocessing plants for irradiated fuel; (f) Facilities for radioactive waste management where radioactive waste is treated, conditioned, stored or disposed of; (g) Any other places where radioactive materials are produced, processed, used, handled or stored; (h) Irradiation facilities for medical, industrial, research and other purposes, and any places where radiation generators are

33 CFR 165.506 - Safety Zones; Fifth Coast Guard District Fireworks Displays.

Science.gov (United States)

2010-07-01

... District Fireworks Displays. 165.506 Section 165.506 Navigation and Navigable Waters COAST GUARD... § 165.506 Safety Zones; Fifth Coast Guard District Fireworks Displays. (a) Regulations. The following regulations apply to the fireworks safety zones listed in the Table to § 165.506. (1) The general regulations...

Harmonization of nuclear and radiation safety regulations for nuclear power plants with reference levels of Western European Nuclear Regulators Association (WENRA)

International Nuclear Information System (INIS)

Bojchuk, V.S.; Mikolajchuk, O.A.; Gromov, G.V.; Dibach, O.M.; Godovanyuk, G.M.; Nosovs'kij, A.V.

2014-01-01

Self-evaluation of the Ukrainian regulations on nuclear and radiation safety that apply to nuclear power plants for compliance with the reference levels of the Western European Nuclear Regulators Association (WENRA) is presented. Proposals on improvement of the regulations upon self-evaluation are provided

THE NATIONAL AUTHORITY FOR ANIMAL HEALTH AND FOOD SAFETY, THE MAIN BODY INVOLVED IN FOOD SAFETY IN ROMANIA

Directory of Open Access Journals (Sweden)

PETRUTA-ELENA ISPAS

2012-05-01

Full Text Available This paper is intended to present the role, functions and responsibilities of the National Authority for Animal Health and Food Safety as the main body involved in food safety in Romania. It will be also exposed the Regulation 178/2002 of the European Parliament and the Council, the general food ”law” in Europe, and Law 150/2004, which transposed into Romanian legislation Regulation 178/2002.

The international radioactive transportation regulations: A model for national regulations

International Nuclear Information System (INIS)

Pope, R.B.; Rawl, R.R.

1990-06-01

The International Atomic Energy Agency's (IAEA) Regulations for the Safe Transport of Radioactive Material, Safety Series No. 6 (herein after denoted as the ''International Regulations'') serve as the model for the regulations for individual countries and international modal organizations controlling the packaging and transportation of radioactive materials. The purpose of this paper is to outline the background and history of the International Regulations, the general principles behind the requirements of the International Regulations, the structure and general contents of the latest edition of the International Regulations, and the roles of various international bodies in the development and implementation of the International Regulations and the current status of regulatory and supportive document development at both the international and domestic level. This review will provide a basis for users and potential users to better understand the source and application of the International Regulations. 1 tab

INFLUENCE OF PLANNING, ORGANIZATIONAL CHARACTERISTICS AND REGULATION ON ROAD TRAFFIC SAFETY OF PEDESTRIANS

Directory of Open Access Journals (Sweden)

G. M. Kuharenok

2011-01-01

Full Text Available The paper presents results of research on planning, organizational characteristics and regulation modes at  the regulated pedestrian crossings, located out of crossroads in the street and road network of Minsk. Some regularities pertaining to the influence of the investigated characteristics on road traffic safety of pedestrians are revealed in the paper. Practical offers on increase of road traffic safety of pedestrians in the Republic of Belarus have been developed on the basis of the executed investigations and cited in the paper. 

Generalized railway tank car safety design optimization for hazardous materials transport: Addressing the trade-off between transportation efficiency and safety

International Nuclear Information System (INIS)

Saat, Mohd Rapik; Barkan, Christopher P.L.

2011-01-01

North America railways offer safe and generally the most economical means of long distance transport of hazardous materials. Nevertheless, in the event of a train accident releases of these materials can pose substantial risk to human health, property or the environment. The majority of railway shipments of hazardous materials are in tank cars. Improving the safety design of these cars to make them more robust in accidents generally increases their weight thereby reducing their capacity and consequent transportation efficiency. This paper presents a generalized tank car safety design optimization model that addresses this tradeoff. The optimization model enables evaluation of each element of tank car safety design, independently and in combination with one another. We present the optimization model by identifying a set of Pareto-optimal solutions for a baseline tank car design in a bicriteria decision problem. This model provides a quantitative framework for a rational decision-making process involving tank car safety design enhancements to reduce the risk of transporting hazardous materials.

Providing current radiation safety according to new version of 'Ukrytie' object regulation

International Nuclear Information System (INIS)

Borovoj, A.A.; Vysotskij, E.D.; Krinitsyn, A.P.; Bogatov, S.A.

1999-01-01

Main provisions are given of the 'Ukryttia' object's Regulation related to provision of radiation safety during the object's operation. The safety is provided due to the realization by the object's personnel of functions of global monitoring of current radiation conditions, as well as of the measures of operative or preventive suppression of radiation abnormalities sources

European regulations on nutraceuticals, dietary supplements and functional foods: A framework based on safety

International Nuclear Information System (INIS)

Coppens, Patrick; Fernandes da Silva, Miguel; Pettman, Simon

2006-01-01

This article describes the legislation that is relevant in the marketing of functional foods in the European Union (EU), how this legislation was developed as well as some practical consequences for manufacturers, marketers and consumers. It also addresses some concrete examples of how the EU's safety requirements for food products have impacted a range of product categories. In the late nineties, research into functional ingredients was showing promising prospects for the use of such ingredients in foodstuffs. Due mainly to safety concerns, these new scientific developments were accompanied by an urgent call for legislation. The European Commission 2000 White Paper on Food Safety announced some 80 proposals for new and improved legislation in this field. Among others, it foresaw the establishment of a General Food Law Regulation, laying down the principles of food law and the creation of an independent Food Authority endowed with the task of giving scientific advice on issues based upon scientific risk assessment with clearly separated responsibilities for risk assessment, risk management and risk communication. Since then, more than 90% of the White Paper proposals have been implemented. However, there is not, as such, a regulatory framework for 'functional foods' or 'nutraceuticals' in EU Food Law. The rules to be applied are numerous and depend on the nature of the foodstuff. The rules of the general food law Regulation are applicable to all foods. In addition, legislation on dietetic foods, on food supplements or on novel foods may also be applicable to functional foods depending on the nature of the product and on their use. Finally, the two proposals on nutrition and health claims and on the addition of vitamins and minerals and other substances to foods, which are currently in the legislative process, will also be an important factor in the future marketing of 'nutraceuticals' in Europe. The cornerstone of EU legislation on food products, including

Transports of radioactive materials. Legal regulations, safety and security concepts, experience

International Nuclear Information System (INIS)

Schwarz, Guenther

2012-01-01

In Germany, approximately 650,000 to 750,000 units containing radioactive materials for scientific, medical and technical applications are shipped annually by surface, air and water transports. Legally speaking, radioactive materials are dangerous goods which can cause hazards to life, health, property and the environment as a result of faulty handling or accidents in transit. For protection against these hazards, their shipment therefore is regulated in extensive national and international rules of protection and safety. The article contains a topical review of the international and national transport regulations and codes pertaining to shipments of radioactive materials, and of the protection concepts underlying these codes so as to ensure an adequate standard of safety and security in shipping radioactive materials in national and international goods traffic. (orig.)

49 CFR 390.3 - General applicability.

Science.gov (United States)

2010-10-01

... SAFETY REGULATIONS; GENERAL General Applicability and Definitions § 390.3 General applicability. Link to... accessories required by this subchapter shall be maintained in compliance with all applicable performance and... rules in this subchapter do not apply to— (1) All school bus operations as defined in § 390.5; (2...

A macromarketing perspective on food safety regulation

DEFF Research Database (Denmark)

Bech-Larsen, Tino; Aschemann-Witzel, Jessica

2012-01-01

of the major stakeholders in the Danish food marketing system. Adding to the literature on diffusion of regulatory initiatives, the analysis shows that the Danish ban on trans-fats had—and still has—an important impact on trans-fat regulation in other European and overseas countries. In the final section......This article discusses the implementation and diffusion of mandatory and voluntary food safety regulations from a marketing systems perspective, and specifically applies this framework to an analysis of the antecedents and implications of the Danish 2003 ban on trans-fatty acids (TFAs......). The analysis is based on reviews of published material and on interviews with food marketers, nutrition experts, and policy makers. It is established that the ban was implemented due to scientific proof of health risks associated with the intake of TFAs but also as a result of aligned interests and efforts...

Overview of a radiation safety program in a district style medical environment

International Nuclear Information System (INIS)

Wilson, G.

2006-01-01

This paper provides an overview of the eight components of a radiation safety program in a large health care facility spread out over several campuses in a large geographic area in Nova Scotia. The main focus is based on those areas that are regulated by the Canadian Nuclear Safety Commission and generally encompass nuclear medicine and radiation therapy operations. X-ray operations are regulated provincially, but the general operational principles of an effective radiation safety program can be applied in all these areas. The main components covered include the set up of an organizational structure that operates separately from individual departments, general items expected from reports to corporate management or regulators, and some examples of the front-line expectations for those in individual departments. The review is not all encompassing, but should give organizations some insight of the magnitude of a radiation safety program in a district style environment. (author)

76 FR 9646 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

Science.gov (United States)

2011-02-22

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Parts 100, 117, 147, and 165 [USCG-2010-0399] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation Regulations and Regulated Navigation Areas AGENCY: Coast Guard, DHS. ACTION: Notice of expired temporary rules...

Patient safety in primary care: a survey of general practitioners in The Netherlands.

NARCIS (Netherlands)

Gaal, S.; Verstappen, W.H.J.M.; Wensing, M.J.P.

2010-01-01

BACKGROUND: Primary care encompasses many different clinical domains and patient groups, which means that patient safety in primary care may be equally broad. Previous research on safety in primary care has focused on medication safety and incident reporting. In this study, the views of general

16 CFR 1115.8 - Compliance with product safety standards.

Science.gov (United States)

2010-01-01

... applicable mandatory consumer product safety standards and to report to the Commission any products which do.... 1115.8 Section 1115.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.8 Compliance with...

Evaluation of the League General Insurance Company child safety seat distribution program

Science.gov (United States)

1982-05-01

This report presents an evaluation of the child safety seat distribution initiated by the League General Insurance Company in June 1979. The program provides child safety seats as a benefit under the company's auto insurance policies to policy-holder...

Implementation of food safety management systems in the UK

OpenAIRE

Mensah, L. D.; Julien, D.

2011-01-01

This paper reports the first stage of work being undertaken to understand the factors that have impacted on the current state of food safety in the UK food manufacturing sector. The paper first explores developments in international food safety regulation in general and in particular, the UK. Using a survey and case study methodology, the paper examines the response of food manufacturing enterprises to food safety regulation, and uses statistical techniques to investigate th...

Use of risk information to safety regulation. Fabrication facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

A procedure of ISA (Integrated Safety Analysis) for uranium fuel fabrication/enrichment facilities has been under the development aiming to utilize risk information for safety regulations in this project. Activities in the fiscal year 2012 are summarized in the paper. There are two major activities in the year. First one is a study on ISA procedure for external events such as earthquakes. Second one is that for chemical consequences such as UF6 and HF. Other than the activities a fundamental study on a policy of utilizing risk information was conducted. The outline and results are provided in the chapter 1 and 2 respectively. (author)

Bases of updating of nuclear safety regulations for NPP in Romania

International Nuclear Information System (INIS)

Biro, Lucian; Serbanescu, Dan

1999-01-01

The paper presents the basic principles of reviewing and updating process of the regulatory environment pyramid. The main part of this review process refers to Cernavoda NPP Unit 2. However, there is an important impact on Cernavoda NPP Unit 1. The basic principles were defined in 1993/1994 when the licensing process for Unit 1 was resumed in order to be in accordance with the latest developments of Candu 600 worldwide and with the IAEA and NEA latest recommended documents and practices. After the licensing process for the Unit 1 was completed up to operation stage, CNCAN developed new updated regulations on nuclear safety and the regulatory pyramid in the framework of the RAMG PHARE project. CNCAN issued in 1996 the regulatory Policy for Unit 2, self-sustained and independent of future possible revisions of the regulations. The use of the concept of hierarchical systems, systematic review of safety criteria and objectives and margins along with the feedback from international and national experience on this topic ensured issuance of a reference document for future approach of nuclear safety in Romania. (authors)

Nuclear power and safety

International Nuclear Information System (INIS)

Saunders, P.; Tasker, A.

1991-01-01

Nuclear power currently provides about a fifth of both Britain's and the world's electricity. It is the largest single source of electricity in Western Europe; in France three quarters of electricity is generated by nuclear power stations. This booklet is about the safety of those plants. It approaches the subject by outlining the basic principles and approaches behind nuclear safety, describing the protective barriers and safety systems that are designed to prevent the escape of radioactive material, and summarising the regulations that govern the construction and operation of nuclear power stations. The aim is to provide a general understanding of the subject by explaining the general principles of the Advanced Gas Cooled Reactor and setting out the UKAEA strategy for nuclear safety, the objective being always to minimize risk. (author)

Cost-benefit comparison of nuclear and nonnuclear health and safety protective measures and regulations

International Nuclear Information System (INIS)

O'Donnell, E.P.; Mauro, J.J.

1979-01-01

This article compares the costs and benefits of health and safety measures and regulations in the nuclear and nonnuclear fields. A cost-benefit methodology for nuclear safety concerns is presented and applied to existing nuclear plant engineered safety features. Comparisons in terms of investment costs to achieve reductions in mortality rates are then made between nuclear plant safety features and the protective measures and regulations associated with nonnuclear risks, particularly with coal-fired power plants. These comparisons reveal a marked inconsistency in the cost effectiveness of health and safety policy, in which nuclear regulatory policy requires much greater investments to reduce the risk of public mortality than is required in nonnuclear areas where reductions in mortality rates could be achieved at much lower cost. A specific example of regulatory disparity regarding gaseous effluent limits for nuclear and fossil-fuel power plants is presented. It is concluded that a consistent health and safety regulatory policy based on uniform risk and cost-benefit criteria should be adopted and that future proposed Nuclear Regulatory Commission regulatory requirements should be critically evaluated from a cost-benefit viewpoint

Regulation for delivery of subsidies for public relations and safety

International Nuclear Information System (INIS)

1984-01-01

The regulations provide for subsidies for the public relations activities and safety operations carried out by a local government for the local inhabitants in the vicinity of a nuclear power generation, etc. facility. This type of activity includes the dissemination of information on nuclear power, studies on securing the safety of the inhabitants and communication concerning the facility safety. The contents are as follows: limits of the subsidies, terms of subsidy allocations, the application for subsidies, determination of subsidy allocations, withdrawal of applications, the conditions to the allocations, a report on the work proceedings, a report on the results, confirmation on the sum of subsidies, withdrawal of the decision for subsidies, limitations for disposal of the properties, etc. (Mori, K.)

Regulation for delivery of subsidies for public relations and safety

International Nuclear Information System (INIS)

1985-01-01

The regulations provide for subsidies for the public relations activities and safety operations carried out by a local government for the local inhabitants in the vicinity of a nuclear power generation, etc. facility. This type of activity includes the dissemination of information on nuclear power, studies on securing the safety of the inhabitants and communication concerning the facility safety. The contents are as follows : limits of the subsidies, terms of subsidy allocations, the application for subsidies, determination of subsidy allocations, withdrawal of applications, the conditions to the allocations, a report on the work proceedings, a report on the results, confirmation on the sum of subsidies, withdrawal of the decision for subsidies, limitations for disposal of the properties, etc. (Kubozono, M.)

Pesticide regulations and farm worker safety: the need to improve pesticide regulations in Viet Nam.

Science.gov (United States)

Phung, Dung Tri; Connell, Des; Miller, Greg; Rutherford, Shannon; Chu, Cordia

2012-06-01

Agricultural pesticide use in Viet Nam has more than tripled since 1990. However, pesticide legislation and regulations have not been developed in response to this large increase in usage, as a result of which pesticides pose a serious threat to human health and the environment. This paper identifies the need to improve pesticide regulations in Viet Nam through a comparative analysis of pesticide regulations in Viet Nam and the United States of America, where the rate of acute poisoning among agricultural workers is much lower than in Viet Nam and where information pertaining to pesticide regulations is made accessible to the public. The analysis identified several measures that would help to improve Viet Nam's pesticide regulations. These include enhancing pesticide legislation, clarifying the specific roles and active involvement of both the environmental and health sectors; performing a comprehensive risk-benefit evaluation of pesticide registration and management practices; improving regulations on pesticide suspension and cancellation, transport, storage and disposal; developing import and export policies and enhancing pesticide-related occupational safety programmes.

The challenges for global harmonisation of food safety norms and regulations: issues for India.

Science.gov (United States)

Prakash, Jamuna

2014-08-01

Safe and adequate food is a human right, safety being a prime quality attribute without which food is unfit for consumption. Food safety regulations are framed to exercise control over all types of food produced, processed and sold so that the customer is assured that the food consumed will not cause any harm. From the Indian perspective, global harmonisation of food regulations is needed to improve food and nutrition security, the food trade and delivery of safe ready-to-eat (RTE) foods at all places and at all times. The Millennium Development Goals (MDGs) put forward to transform developing societies incorporate many food safety issues. The success of the MDGs, including that of poverty reduction, will in part depend on an effective reduction of food-borne diseases, particularly among the vulnerable group, which includes women and children. Food- and water-borne illnesses can be a serious health hazard, being responsible for high incidences of morbidity and mortality across all age groups of people. Global harmonisation of food regulations would assist in facilitating food trade within and outside India through better compliance, ensuring the safety of RTE catered foods, as well as addressing issues related to the environment. At the same time, regulations need to be optimum, as overregulation may have undue negative effects on the food trade. © 2013 Society of Chemical Industry.

Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs in workplaces and public areas

CERN Document Server

International Organization for Standardization. Geneva

2002-01-01

This International Standard establishes the safety identification colours and design principles for safety signs to be used in workplaces and in public areas for the purpose of accident prevention, fire protection, health hazard information and emergency evacuation. It also establishes the basic principles to be applied when developing standards containing safety signs. This part of ISO 3864 is applicable to workplaces and all locations and all sectors where safety-related questions may be posed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, generally speaking, to those sectors subject to a regulation which may differ.

Radiation safety

International Nuclear Information System (INIS)

Van Riessen, A.

2002-01-01

Full text: Experience has shown that modem, fully enclosed, XRF and XRD units are generally safe. This experience may lead to complacency and ultimately a lowering of standards which may lead to accidents. Maintaining awareness of radiation safety issues is thus an important role for all radiation safety officers. With the ongoing progress in technology, a greater number of radiation workers are more likely to use a range of instruments/techniques - eg portable XRF, neutron beam analysis, and synchrotron radiation analysis. The source for each of these types of analyses is different and necessitates an understanding of the associated dangers as well as use of specific radiation badges. The trend of 'suitcase science' is resulting in scientists receiving doses from a range of instruments and facilities with no coordinated approach to obtain an integrated dose reading for an individual. This aspect of radiation safety needs urgent attention. Within Australia a divide is springing up between those who work on Commonwealth property and those who work on State property. For example a university staff member may operate irradiating equipment on a University campus and then go to a CSIRO laboratory to operate similar equipment. While at the University State regulations apply and while at CSIRO Commonwealth regulations apply. Does this individual require two badges? Is there a need to obtain two licences? The application of two sets of regulations causes unnecessary confusion and increases the workload of radiation safety officers. Radiation safety officers need to introduce risk management strategies to ensure that both existing and new procedures result in risk minimisation. A component of this strategy includes ongoing education and revising of regulations. AXAA may choose to contribute to both of these activities as a service to its members as well as raising the level of radiation safety for all radiation workers. Copyright (2002) Australian X-ray Analytical

Impact of new environmental and safety regulations on uranium exploration, mining, milling and management of its waste. Proceedings of a technical committee meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-01

Concern for health, safety and the environment has grown rapidly during the last two decades. Exploitation of any mineral commodity, including uranium, involves the modification of the surrounding environment. Appropriate regulations governing such activities can assure good practices and minimize possible negative impacts on the environment and the health and safety of the workers and the general public. During the past few years, a number of countries have promulgated new regulations related to uranium exploitation, mining, milling and the related waste management. Recent regulations are stricter in terms of environmental assessment, mitigation, radiation protection and control of waste. The impact of those regulations in developed countries has resulted in better planning of operations, improvement in mine and mill designs and a more efficient approach to tailings management. The Meeting was attended by 25 participants from 17 countries representing government organizations and private industry. This document includes 21 papers presented at the Meeting on new experiences in major uranium producing countries on the subject, past producers, as well as on country where regulations and related regulatory structure are still at the early evolutionary stage. Each of the papers was indexed separately.

Impact of new environmental and safety regulations on uranium exploration, mining, milling and management of its waste. Proceedings of a technical committee meeting

International Nuclear Information System (INIS)

2001-09-01

Concern for health, safety and the environment has grown rapidly during the last two decades. Exploitation of any mineral commodity, including uranium, involves the modification of the surrounding environment. Appropriate regulations governing such activities can assure good practices and minimize possible negative impacts on the environment and the health and safety of the workers and the general public. During the past few years, a number of countries have promulgated new regulations related to uranium exploitation, mining, milling and the related waste management. Recent regulations are stricter in terms of environmental assessment, mitigation, radiation protection and control of waste. The impact of those regulations in developed countries has resulted in better planning of operations, improvement in mine and mill designs and a more efficient approach to tailings management. The Meeting was attended by 25 participants from 17 countries representing government organizations and private industry. This document includes 21 papers presented at the Meeting on new experiences in major uranium producing countries on the subject, past producers, as well as on country where regulations and related regulatory structure are still at the early evolutionary stage. Each of the papers was indexed separately

State of bus safety in the U.S. : summary of federal and state regulations.

Science.gov (United States)

2014-06-01

This report provides a comprehensive overview of transit bus safety regulations and standards developed by all 50 states, as well as : information on how state departments of transportation (DOT) regulate the maintenance or operation of transit/parat...

Risk assessment and safety regulations in offshore oil and gas ...

African Journals Online (AJOL)

Risk management of which risk assessment is part, and safety regulations are common in the offshore oil and gas industry management system. The process of conducting risk assessment is mostly a challenge for operational personnel assigned to perform this function. The most significant problem is the decision to use ...

The regulator's perspective

International Nuclear Information System (INIS)

Norrby, S.

1997-01-01

Recommendations on general safety objectives and good practices related to radioactive waste management are given by international organisations such as the OECD/NEA and the IAEA. Moreover, international conventions and other supranational legal instruments, such as EU directives, lay down requirements on the safe management of radioactive waste. The implementer of the system for waste management and disposal and the regulator will have different roles. The responsibility for the management and disposal of radioactive waste is with the implementer, who has taken over that responsibility from the generator of the waste. The regulator's responsibility is to define safety and radiation protection requirements, to issue guidance on safety assessment methodology and documentation, to review the implementer's safety assessments as a basis for licensing of waste management and disposal activities and facilities and to inspect and review construction and operation of nuclear facilities to ensure compliance with licensing conditions. (R.P.)

Development and action plan for the alternative regulation instruments

International Nuclear Information System (INIS)

Kim, Jung Yul; Hagm, Yo Sang

2004-02-01

The goal of this study to provide highly practical model, needed for regulation if nuclear power safety to regulation agency. Since nuclear power safety regulation has different characteristics, compared to general regulation, it is important to have new point of view and approach. But application possibility for regulation that guarantees the 'perfect safety' is very low. Therefore, it is important establish nuclear power safety regulation that is realistic as well as safety securing. In order to establish high quality regulation, evaluation of existing regulation must be done first. Thus in this study, 6 standards to evaluate existing regulation are suggested. They are clearness, efficiency, flexibility, reliability, responsibility and political consideration. Also, strategies to complement the weak points of regulatory governance, regulatory sunset, regulatory map, regulatory negotiation, regulatory benefit-cost analysis, etc. These strategies can be applied all in one regulation, and can strategically be selected for application. After analyzing the result if case analysis on nuclear furnace regulation for research study, agreement was made that it is most efficient to consider in the order if clearness reliability, flexibility, confidence, political consideration, administrative efficiency and economic efficiency

Development and action plan for the alternative regulation instruments

Energy Technology Data Exchange (ETDEWEB)

Kim, Jung Yul [Daegu Univ., Gyeongsan (Korea, Republic of); Hagm, Yo Sang [Korea Univ., Seoul (Korea, Republic of)

2004-02-15

The goal of this study to provide highly practical model, needed for regulation if nuclear power safety to regulation agency. Since nuclear power safety regulation has different characteristics, compared to general regulation, it is important to have new point of view and approach. But application possibility for regulation that guarantees the 'perfect safety' is very low. Therefore, it is important establish nuclear power safety regulation that is realistic as well as safety securing. In order to establish high quality regulation, evaluation of existing regulation must be done first. Thus in this study, 6 standards to evaluate existing regulation are suggested. They are clearness, efficiency, flexibility, reliability, responsibility and political consideration. Also, strategies to complement the weak points of regulatory governance, regulatory sunset, regulatory map, regulatory negotiation, regulatory benefit-cost analysis, etc. These strategies can be applied all in one regulation, and can strategically be selected for application. After analyzing the result if case analysis on nuclear furnace regulation for research study, agreement was made that it is most efficient to consider in the order if clearness reliability, flexibility, confidence, political consideration, administrative efficiency and economic efficiency.

Panel 1: Safety design criteria

International Nuclear Information System (INIS)

Yllera, Javier

2013-01-01

There is general consensus in the nuclear community, and more after the Fukushima accident, that the deployment of nuclear energy has to be done at the highest levels of nuclear safety and that safety cannot be compromised by other factors. It is well understood that reactors that are being licensed and the new generations of reactors that will be constructed in the future will need to reach higher safety levels than the existing ones. Several countries and international organizations or international groups are launching initiatives to harmonise safety goals, safety requirements, safety objectives, regulations, criteria or safety reference levels. There are differences in the meanings of these terms and the working approaches, but the overall purpose is the same: to specify how new plants can be safer. In this context, the IAEA has an statutory function for developing international nuclear safety standards. The IAEA safety standards are per se not mandatory for IAEA Member States. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA’s standards for use in their national regulations in different ways. The IAEA Safety Standards represent international consensus on what must constitute a high level of safety for nuclear installations. In the area of NPP design, IAEA safety standards that are published are intended to apply primarily to new plants. It might not be practicable to apply all the requirements to plants that are already in operation. In addition, the focus is primarily on plants with water cooled reactors

The new EU regulations for food safety

Directory of Open Access Journals (Sweden)

Nicola Comodo

2007-03-01

Full Text Available The inspirational principles of the norms known as the “Hygiene package”: the framework of new perspectives on food safety. At the beginning of the 1980s, all member states of the World Trade Organisation (WTO subscribed to international agreements regarding strategies for food production and its marketing. These agreements, known as TRIPS (Agreement on Trade- Related Aspects of Intellectual Property Rights, GATT (General Agreement on Tariffs and Trade, GATS (General Agreement on Trade in Services and TRIMS (Agreement on Trade-Related Investment Measures [1] signalled the beginning of a new, globalized, commercial strategy on food products which has also caused importantrepercussions within the European boundaries, but with some fundamental differences.

Safety at CERN

CERN Document Server

2009-01-01

Safety is an integral part of our working lives, and should be in our minds whatever job we do at CERN. Ultimately, safety is the responsibility of the Director General – your safety is my concern. That’s why I have this week appointed a new Safety Policy Committee (SAPOCO) that reflects the new Organizational structure of CERN. CERN’s Staff Rules and Regulations clearly lay out in chapter 3 the scope of safety at CERN as well as my responsibilities and yours in safety matters. At CERN, safety is considered in the broadest sense, encompassing occupational Health and Safety, environmental protection, and the safety of equipment and installations. It is my responsibility to put appropriate measures in place to ensure that these conditions are met. And it is the responsibility of us all to ensure that we are fully conversant with safety provisions applicable in our areas of work and that we comply with them. The appointment of a n...

Joint convention on the safety of spent fuel management and on the safety of radioactive waste management. Report of the Federal Republic of Germany for the sixth review meeting in May 2018

International Nuclear Information System (INIS)

2017-08-01

The joint convention on the safety of spent fuel management and on the safety of radioactive waste management covers the following topics: historical development and actual status of the civil use of nuclear power, politics and the spent fuel management, inventories and listing, legislation and executive systems, other safeguard regulations, safety during spent fuel handling, safety during radioactive waste processing, transport across national borders, disused enclosed radioactive sources, general regulations for safety enhancement.

29 CFR 1977.3 - General requirements of section 11(c) of the Act.

Science.gov (United States)

2010-07-01

... WILLIAMS-STEIGER OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 General § 1977.3 General requirements of... 29 Labor 9 2010-07-01 2010-07-01 false General requirements of section 11(c) of the Act. 1977.3 Section 1977.3 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

Application of a support vector machine algorithm to the safety precaution technique of medium-low pressure gas regulators

Science.gov (United States)

Hao, Xuejun; An, Xaioran; Wu, Bo; He, Shaoping

2018-02-01

In the gas pipeline system, safe operation of a gas regulator determines the stability of the fuel gas supply, and the medium-low pressure gas regulator of the safety precaution system is not perfect at the present stage in the Beijing Gas Group; therefore, safety precaution technique optimization has important social and economic significance. In this paper, according to the running status of the medium-low pressure gas regulator in the SCADA system, a new method for gas regulator safety precaution based on the support vector machine (SVM) is presented. This method takes the gas regulator outlet pressure data as input variables of the SVM model, the fault categories and degree as output variables, which will effectively enhance the precaution accuracy as well as save significant manpower and material resources.

Critical Reflections on Conservatism in Nuclear Safety Regulation

International Nuclear Information System (INIS)

Choi, Young Sung; Choi, Kwang Sik

2007-01-01

A recent report published by the Committee on Nuclear Regulatory Activities (CNRA) of the OECD Nuclear Energy Agency (NEA) says that a fundamental principle for safety regulators is the practice of conservative decision making. Nuclear regulators frequently face challenging issues surrounded by uncertainties or lack of data and information. No matter what efforts will be made to collect the available information and to assess the issues, nobody can clear all the uncertainties and make absolutely certain decision. More often than not, the regulators have to make a decision in light of continuing uncertainties and limited information. It is at this point that the principle of conservatism should play a role. However the principle comes in many diverse forms such as default conservatism, precautionary principle, defense in depth and realistic conservatism. These different forms of conservatism have different roles and meanings that will take a decision maker to drastically different results. This paper reviews different forms of conservatism in critical way, presents analytical framework for decision making under uncertainty and suggests future research works needed

Licensing of safety critical software for nuclear reactors. Common position of seven European nuclear regulators and authorised technical support organisations

International Nuclear Information System (INIS)

2007-01-01

premise that a safety plan exists and has been agreed upon by all parties involved. The intent herein is to give guidance on how to produce the evidence and the documentation for the safety demonstration and for the contents for the safety plan. It is therefore implied that all the evidence and documentation recommended by this report, among others that the regulator may request, should be made available to the regulator. The safety plan should include a safety demonstration strategy. It is a stepwise verification which includes: - an analysis of each individual software and hardware component with its specified features, and - integrated tests of the software on a hardware system using a 'typical' configuration. Only properties at the component level can be demonstrated by this plant independent type approval. It must be remembered that a program can be correct for one set of data, and be erroneous for another. Hence assessment and testing of the plant specific software remains essential. As described earlier, in a first stage, the task force selected a set of specific technical issue areas, which were felt to be of utmost importance to the licensing process. In a second stage phase, each of these issue areas was studied and discussed in detail until a common position was reached. These issue areas were partitioned into two sets: 'Generic Licensing Issues' and 'Life Cycle Phase Licensing Issues'. Issues in the second set are related to a specific stage of the computer based system design and development process, while those of the former have more general implications and apply to several stages or to the whole system life cycle

Methods of checking general safety criteria in UML statechart specifications

International Nuclear Information System (INIS)

Pap, Zsigmond; Majzik, Istvan; Pataricza, Andras; Szegi, Andras

2005-01-01

This paper describes methods and tools for safety analysis of UML statechart specifications. A comprehensive set of general safety criteria including completeness and consistency is applied in automated analysis. Analysis techniques are based on OCL expressions, graph transformations and reachability analysis. Two canonical intermediate representations of the statechart specification are introduced. They are suitable for straightforward implementation of checker methods and for the support of the proof of the correctness and soundness of the applied analysis. One of them also serves as a basis of the metamodel of a variant of UML statecharts proposed for the specification of safety-critical control systems. The analysis is extended to object-oriented specifications. Examples illustrate the application of the checker methods implemented by an automated tool-set

Risk based regulation: a convenient concept for legislation and regulation in the field of technical risks?

International Nuclear Information System (INIS)

Seiler, J.H.

1998-01-01

Legislation and regulation concerning risk activities are traditionally based on deterministic safety measures. This may lead to inefficient results: sometimes the law requires safety measures which are - from an economic viewpoint - not justified because of their poor cost-effectiveness; sometimes it does not require safety measures although they would be very efficient. The risk based regulation approach wants to make the law more efficient and to get more safety at less costs. Legislation and regulation should be based on terms of risk rather than on deterministic rules. Risk should be expressed in quantitative terms and risk regulation should be based on the cost-effectiveness of safety measures. Thus a most efficient (in the sense of the economic analysis of the law) strategy for safety and environmental law could be established. The approach is economically reasonable and theoretically convincing. Its practical implementation however raises a lot of technical and legal questions. The project 'Risk Based Regulation' (1996-1999), sponsored by the Swiss National Fund for Scientific Research, intends to evaluate the practical feasibility of the approach from a technical and a legal view. It contains a general part which describes the risk based regulation approach and its legal and technical questions, case studies which try to practically implement the risk based regulation approach; the case studies are: storage and management of explosives in the army, storage and management of explosives for non-military purposes, safety at work, accident prevention in the non-professional field (mainly road accidents), fire protection, transportation of dangerous goods, waste disposal: traditional waste, waste disposal: radioactive waste, nuclear energy (reactor safety), a synthesis with recommendations for the future legislation and regulation in the field of technical risks. The paper presents the project and its preliminary results. (author)

Development of a safety and regulation systems simulation program II

International Nuclear Information System (INIS)

1985-05-01

This report describes the development of a safety and regulation systems simulation program under contract to the Atomic Energy Control Board of Canada. A systems logic interaction simulation (SLISIM) program was developed for the AECB's HP-1000 computer which operates in the interactive simulation (INSIM) program environment. The SLISIM program simulates the spatial neutron dynamics, the regulation of the reactor power and in this version the CANDU-PHW 600 MW(e) computerized shutdown systems' trip parameters. The modular concept and interactive capability of the INSIM environment provides the user with considerable flexibility of the setup and control of the simulation

Safety objectives for nuclear activities in Canada

International Nuclear Information System (INIS)

1982-04-01

This report by the Advisory Committee on Nuclear Safety presents a concise statement of the basic safety objectives which the Committee considers underlie, or should underlie, the regulations and the licensing and compliance practices of the Atomic Energy Control Board. The report also includes a number of general criteria for achieving these objectives

A generalized framework for assessment of safety margins in nuclear power plants

International Nuclear Information System (INIS)

Gavrilas, M.; Youngblood, B.; Prelewicz, D.; Meyer, Jim

2004-01-01

The protection of public health and safety, and the environment from inadvertent releases of radioactive materials from nuclear power plants relies on the implementation of the defense-in-depth strategy. The term defense-in-depth evolved historically, and thus its application has not always been uniform. The use of the term in the context of the U.S. Nuclear Regulatory Commission (NRC) safety philosophy entails the reliance of a nuclear facility on successive compensatory measures in preventing accidents or mitigating damage caused by malfunctions, accidents, or naturally occurring events. The introduction of probabilistic risk analyses with NUREG-74/014 and subsequent evolution in risk assessment techniques, are leading to the implementation of risk informed regulation to ensure the safety of the public and the environment. Risk informed regulation minimizes the likelihood of overlooking potentially significant accident sequences while limiting unnecessary burdens imposed on licensees. The proposed framework merges fundamental elements of safety regulation: defense-in depth, safety margins and probabilistic risk. It formalizes the relationship between probabilistic risk assessment (PRA) methods and data, and deterministic analyses in a manner consistent with NRC's defense-in-depth philosophy. Succinctly put, the likelihood and consequences of accident scenarios are considered simultaneously and quantified by a plant safety metric. The integration of these fundamental elements into a practically applicable safety framework is consistent with the NRC policy statement on use of probabilistic risk assessment methods and the November 2002 Regulatory Guide on risk informed decisions on plant-specific changes to the licensing basis. Safety information resulting from the application of the framework supersedes traditional safety figures of merit. Safety quantifiers, referred herein as safety indices, expand on the qualifier outcomes that currently accompany fault tree

EDF - The Inspector General's report on Nuclear Safety and Radiation Protection 2012

International Nuclear Information System (INIS)

2013-01-01

After a first chapter in which the Inspector General states his own vision of facts and results regarding nuclear safety and radiation protection for 2012, the next chapters address the following topics: the contrasted results of nuclear operating safety, the need to remain vigilant in nuclear safety management, the challenge of occupational safety, the need of new ambitious goals for radiation protection, an updated training which must be better led by line management, maintenance as a strategic issue, the long road ahead for nuclear technical information system (SDIN), the need of better attention to chemistry in operations, the new impetus of EPRs, plant life extension conditioned by nuclear safety, the mobilization of nuclear operators after Fukushima, and noteworthy operating events

Safety and regulation in the use of radiation in medicine: status in India and future perspective

International Nuclear Information System (INIS)

Gopalakrishnan, A.; Parthasarathy, K.S.; Ghosh, P.K.

1996-01-01

This paper briefly reviews the history of radiation protection, regulatory aspects and the status of radiation safety in radiotherapy, radiodiagnosis and nuclear medicine in India. The revised basic safety standards and the future developments envisaged in the safety and regulation are also mentioned. (author). 24 refs., 8 tabs

Multimegawatt Space Reactor Safety

International Nuclear Information System (INIS)

Stanley, M.L.

1989-01-01

The Multimegawatt (MMW) Space Reactor Project supports the Strategic Defense Initiative Office requirement to provide reliable, safe, cost-effective, electrical power in the MMW range. Specifically, power may be used for neutral particle beams, free electron lasers, electromagnetic launchers, and orbital transfer vehicles. This power plant technology may also apply to the electrical power required for other uses such as deep-space probes and planetary exploration. The Multimegawatt Space Reactor Project, the Thermionic Fuel Element Verification Program, and Centaurus Program all support the Multimegawatt Space Nuclear Power Program and form an important part of the US Department of Energy's (DOE's) space and defense power systems activities. A major objective of the MMW project is the development of a reference flight system design that provides the desired levels of public safety, health protection, and special nuclear material (SNM) protection when used during its designated missions. The safety requirements for the MMW project are a hierarchy of requirements that consist of safety requirements/regulations, a safety policy, general safety criteria, safety technical specifications, safety design specifications, and the system design. This paper describes the strategy and philosophy behind the development of the safety requirements imposed upon the MMW concept developers. The safety organization, safety policy, generic safety issues, general safety criteria, and the safety technical specifications are discussed

Recent development in safety regulation of nuclear fuel cycle activities

International Nuclear Information System (INIS)

Kato, S.

2001-01-01

Through the effort of deliberation and legislation over five years, Japanese government structure was reformed this January, with the aim of realizing simple, efficient and transparent administration. Under the reform, the Agency for Nuclear and Industrial Safety (ANIS) was founded in the Ministry of Economy, Trade and Industry (METI) to be responsible for safety regulation of energy-related nuclear activities, including nuclear fuel cycle activities, and industrial activities, including explosives, high-pressure gasses and mining. As one of the lessons learned from the JCO criticality accident of September 1999, it was pointed out that the government's inspection function was not enough for fuel fabrication facilities. Accordingly, new statutory regulatory activities were introduced, namely, inspection of observance of safety rules and procedures for all kinds of nuclear operators and periodic inspection of fuel fabrication facilities. In addition, in order to cope with insufficient safety education and training of workers in nuclear facilities, licensees of nuclear facilities are required by law to specify safety education and training for their workers. ANIS is committed to enforce these new regulatory activities effectively and efficiently. In addition, it is going to be prepared, in its capacity as safety regulatory authority, for future development of Japanese fuel cycle activities, including commissioning of JNFL Rokkasho reprocessing plant and possible application for licenses for JNFL MOX fabrication plant and for spent fuel interim storage facilities. (author)

21 CFR 170.20 - General principles for evaluating the safety of food additives.

Science.gov (United States)

2010-04-01

... food additives. 170.20 Section 170.20 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES Food Additive Safety § 170.20 General principles for evaluating the safety of food additives. (a) In reaching a...

The UK health and safety executive's policies on information relating to nuclear safety regulation

International Nuclear Information System (INIS)

Williams, L.

1994-01-01

How a message is transmitted can be as important as what is said. To be effective a message has to be timely, targeted and clear. People do not always remember what was said, by how and when it was said. This paper discusses some of the tools which the Nuclear Safety Division (NSD), the UK's nuclear regulator, has used and emphasizes the need to recognize the importance of a recipient interest in attempting to transmit a message. (author). 4 refs

NRC safety research in support of regulation. Selected highlights

International Nuclear Information System (INIS)

1986-05-01

The report presents selected highlights of how research has contributed to the regulatory effort. It explains the research role of the NRC and nuclear safety research contributions in the areas of: pressure vessel integrity, piping, small- and large-break loss-of-coolant accidents, hydrogen and containment, source term analysis, seismic hazards and high-level waste management. The report also provides a summary of current and future research directions in support of regulation

Leadership and Management for Safety. General Safety Requirements (Arabic Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Chinese Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (French Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Spanish Edition)

International Nuclear Information System (INIS)

2017-01-01

his Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

48 CFR 1252.217-80 - Department of Labor Safety and Health Regulations for Ship Repairing.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Department of Labor Safety and Health Regulations for Ship Repairing. 1252.217-80 Section 1252.217-80 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 1252.217-80...

Safety analysis reports. Current status (third key report)

International Nuclear Information System (INIS)

1999-01-01

A review of Ukrainian regulations and laws concerned with Nuclear power and radiation safety is presented with an overview of the requirements for the Safety Analysis Report Contents. Status of Safety Analysis Reports (SAR) is listed for each particular Ukrainian NPP including SAR development schedules. Organisational scheme of SAR development works includes: general technical co-ordination on Safety Analysis Report development; list of leading organisations and utilization of technical support within international projects

Learning and nuclear safety: New reactors and US regulation

International Nuclear Information System (INIS)

Nichols, E.; Wildavsky, A.

1992-01-01

Gathering and analyzing data from operating reactors has become part of government and industry programs to improve performance in plants already on line and to inform development of future reactors. In the United States, however, early development and certain other factors combined to encourage a bias in learning. Regulation and learning from operational data intersect in ways that limit participation, data collection, and positive response to findings. Past learning has shown the advantage of simpler more standard designs with passive or inherent safety features. However, even designs incorporating these past lessons are apt to face tough regulatory tests and much criticism as operating experience is gathered. Only the operational success of new standardized reactors is apt to help rationalize regulation. (orig.)

Generally Recognized as Safe: Uncertainty Surrounding E-Cigarette Flavoring Safety

Directory of Open Access Journals (Sweden)

Clara G. Sears

2017-10-01

Full Text Available Despite scientific uncertainty regarding the relative safety of inhaling e-cigarette aerosol and flavorings, some consumers regard the U.S. Food and Drug Administration’s “generally recognized as safe” (GRAS designation as evidence of flavoring safety. In this study, we assessed how college students’ perceptions of e-cigarette flavoring safety are related to understanding of the GRAS designation. During spring 2017, an online questionnaire was administered to college students. Chi-square p-values and multivariable logistic regression were employed to compare perceptions among participants considering e-cigarette flavorings as safe and those considering e-cigarette flavorings to be unsafe. The total sample size was 567 participants. Only 22% knew that GRAS designation meant that a product is safe to ingest, not inhale, inject, or use topically. Of participants who considered flavorings to be GRAS, the majority recognized that the designation meant a product is safe to ingest but also considered it safe to inhale. Although scientific uncertainty on the overall safety of flavorings in e-cigarettes remains, health messaging can educate the public about the GRAS designation and its irrelevance to e-cigarette safety.

Application of probabilistic safety goals to regulation of nuclear power plants in Canada

Energy Technology Data Exchange (ETDEWEB)

Rzentkowski, G.; Akl, Y.; Yalaoui, S. [Canadian Nuclear Safety Commission, Ottawa, Ontario (Canada)

2013-07-01

In the Canadian nuclear regulatory framework, Safety Goals are formulated in addition to the deterministic design requirements and the dose acceptance criteria so that risk to the public that originates from accidents outside the design basis is considered. In principle, application of the Safety Goals ensures that the likelihood of accidents with serious radiological consequences is extremely low, and the potential radiological consequences from severe accidents are limited as far as practicable. Effectively, the Safety Goals extend the plant design envelope to include not only the capabilities of the plant to successfully cope with various plant states, but also practical measures to halt the progression of severe accidents. This paper describes the general approach to the development of the Safety Goals and their application to the existing nuclear power plants in Canada. This general approach is consistent with the currently accepted international practice and Canadian regulatory experience. The results of probabilistic safety assessments indicate that the Safety Goals meet or exceed international safety objectives due to effective implementation of the defence-in-depth principle in the reactor design and plant operation. At the same time, the application of the Safety Goals reveal that practicable measures exist to further enhance the overall level of reactor safety by focusing on severe accident prevention and mitigation. These measures are being currently implemented through refurbishment projects and feedback on operating experience. (author)

Food safety regulations: what we learned from the Fukushima nuclear accident

International Nuclear Information System (INIS)

Hamada, Nobuyuki; Ogino, Haruyuki

2012-01-01

On 11 March 2011, the magnitude-9.0 earthquake and a substantial tsunami struck off the northeast coast of Japan. The Fukushima nuclear power plants were inundated and stricken, followed by radionuclide releases outside the crippled reactors. Provisional regulation values for radioactivity in food and drink were set on 17 March and were adopted from the preset index values, except that for radioiodines in water and milk ingested by infants. For radiocesiums, uranium, plutonium and transuranic α emitters, index values were defined in all food and drink not to exceed a committed effective dose of 5 mSv/year. Index values for radioiodines were defined not to exceed a committed equivalent dose to the thyroid of 50 mSv/year, and set in water, milk and some vegetables, but not in other foodstuffs. Index values were calculated as radioactive concentrations of indicator radionuclides ( 131 I for radioiodines, 134 Cs and 137 Cs for radiocesiums) by postulating the relative radioactive concentration of coexisting radionuclides (e.g., 132 I, 133 I, 134 I, 135 I and 132 Te for 131 I). Surveys were thence conducted to monitor levels of 131 I, 134 Cs and 137 Cs. Provisional regulation values were exceeded in tap water, raw milk and some vegetables, and restrictions on distribution and consumption began on 21 March. Fish contaminated with radioiodines at levels of concern were then detected, so that the provisional regulation value for radioiodines in seafood adopted from that in vegetables were additionally set on 5 April. Overall, restrictions started within 25 days after the first excess in each food or drink item, and maximum levels were detected in leafy vegetables (54,100 Bq/kg for 131 I, and a total of 82,000 Bq/kg for 134 Cs and 137 Cs). This paper focuses on the logic behind such food safety regulations, and discusses its underlying issues. The outlines of the food monitoring results for 24,685 samples and the enforced restrictions will also be described. - Highlights

Project CHERISH (Children in Home Environments: Regulation To Improve Safety and Health). Final Report.

Science.gov (United States)

Grubb, Paul Dallas

In 1990, Project CHERISH (Children in Home Environments: Regulation to Increase Safety and Health) enabled the Texas Department of Human Services to implement and evaluate several innovative strategies to strengthen regulation of family day care homes. This report contains descriptions of those strategies, an evaluation of their efficacy, and…

21 CFR 570.20 - General principles for evaluating the safety of food additives.

Science.gov (United States)

2010-04-01

... food additives. 570.20 Section 570.20 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES Food Additive Safety § 570.20 General principles for evaluating the safety of food additives. (a) In reaching a...

76 FR 7107 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

Science.gov (United States)

2011-02-09

... defined boundary for which regulations for vessels navigating within the area have been established by the...)...... 9/19/2008 USCG-2008-0814 San Diego, CA Safety Zones (Part 165)...... 9/6/2008 USCG-2008-0827 Ocean... (Part 165). USCG-2009-0402 Ocean City, NJ Safety Zones (Part 165)...... 10/10/2009 USCG-2009-0403...

75 FR 4305 - Regulatory Guidance Concerning the Applicability of the Federal Motor Carrier Safety Regulations...

Science.gov (United States)

2010-01-27

... review of, or preparation and transmission of, typed messages via wireless phones. Because of the safety... Secretary broad power in carrying out motor carrier safety statutes and regulations to ``prescribe.... Handheld or other wireless electronic devices that are brought into a CMV are considered ``additional...

Food irradiation: its role in food safety

International Nuclear Information System (INIS)

Qureshi, R. U.

1985-01-01

There are food safety criteria generally defined by international groups and specifically defined by individual countries. Food irradiation will be discussed in the light of food safety regulations. The merits and acceptability of food irradiation in promoting trade within and between countries will also be discussed. The need for public awareness and training of technical personnel will be highlighted

Food irradiation: its role in food safety

Energy Technology Data Exchange (ETDEWEB)

Qureshi, R U

1986-12-31

There are food safety criteria generally defined by international groups and specifically defined by individual countries. Food irradiation will be discussed in the light of food safety regulations. The merits and acceptability of food irradiation in promoting trade within and between countries will also be discussed. The need for public awareness and training of technical personnel will be highlighted

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-10-15

The IAEA's Statute authorizes the Agency to 'establish or adopt... standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements

International Nuclear Information System (INIS)

2012-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt... standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

Assessment of the U.S. regulations for fissile exemptions and fissile material general licenses

International Nuclear Information System (INIS)

Parks, C.V.; Hopper, C.M.; Lichtenwalter, J.J.; Easton, E.P.; Brochman, P.G.

1998-05-01

The paragraphs for general licenses for fissile material and exemptions (often termed exceptions in the international community) for fissile material have long been a part of the US Code of Federal Regulations (CFR) 10 CFR Part 71, Packaging and Transportation of Radioactive Material. More recently, the Nuclear Regulatory Commission (NRC) issued a final rule on Part 71 via emergency rule-making procedures in order to address an identified deficiency related to one of the fissile exemptions. To address the specified deficiency in a general fashion, the emergency rule adopted the approach of the 1996 Edition of the IAEA: Regulations for the Safe Transport of Radioactive Material (IAEA 1996), which places restrictions on certain moderating materials and limits the quantity of fissile material in a consignment. The public comments received by the NRC indicated general agreement with the need for restrictions on certain moderators (beryllium, deuterium, and graphite). The comments indicated concern relative to both the degree of restriction imposed (not more than 0.1% of fissile material mass) and the need to limit the fissile material mass of the consignment, particularly in light of the subsequent NRC staff position that the true intent was to provide control for limiting the fissile mass of the conveyance. The purpose of the review is to identify potential deficiencies that might be adverse to maintaining adequate subcriticality under normal conditions of transport and hypothetical accident conditions. In addition, ORNL has been asked to identify changes that would address any identified safety issues, enable inherently safe packages to continue to be unencumbered in transport, and seek to minimize the impact on current safe practices

The fourth country report on agreement of safety supervision on radiation waste and management of spent fuel

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-10-15

This report covered the agreement of safety supervision on radiation waste and management of spent fuel. It listed the stipulation, the common law, the coverage and the amount of stock on spent fuel. Also, it indicated law and regulations and restriction on the related the agency, general safety regulations, policy on guarantee of quality, emergency method, dismantling, management of safety control on spent fuel including a process of establishment and safety requirements, regulations of conveyance between countries and improvement of safety of spent fuel.

Moving beyond command-and-control: reflexivity in the regulation of occupational safety and health and the environment.

NARCIS (Netherlands)

Aalders, M.V.C.; Wilthagen, T.

1997-01-01

Direct or "command-and-control" regulation has had limited success in dealing with occupational health and safety and with environmental regulation. This lack of success has led policymakers to experiment with self-regulation as an alternative means of achieving the goals of social regulation. The

Schedules of Provisions of the IAEA Regulations for the Safe Transport of Radioactive Material (2009 Ed.). Safety Guide

International Nuclear Information System (INIS)

2014-01-01

This Safety Guide is issued in support of Regulations for the Safe Transport of Radioactive Material (IAEA Safety Standards Series No. TS-R-1, 2009 Edition). It lists the paragraph numbers of the Transport Regulations that are relevant for specified types of consignment, classified according to their UN numbers. It does not provide additional recommendations. The intended users are consignors and consignees, carriers, shippers, regulators, and end users involved in the transport of radioactive material. A person or organization intending to transport a particular type of consignment of radioactive material must meet requirements in all sections of the Transport Regulations. This Safety Guide aids users by providing a listing of the relevant requirements of the Transport Regulations for each type of radioactive material, package or shipment. Once a consignor has classified the radioactive material to be shipped, the appropriate UN number can be assigned and the paragraph numbers of the requirements that apply for the shipment can be found in the corresponding schedule

49 CFR 587.6 - General description.

Science.gov (United States)

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Side Impact Moving Deformable Barrier § 587.6 General description. (a) The moving deformable barrier consists of component parts and...

Official News relating to CERN Safety Rules

CERN Multimedia

HSE Unit

2015-01-01

The CERN Safety Rules listed below have been published on the HSE website (see here) and entered into force on the 9 June 2015:   Safety Regulation SR-M “Mechanical equipment”: http://cern.ch/safety-rules/SR-M_ENv2.htm; this SR-M (version 2) cancels and replaces SR-M (version 1) and the corresponding provisions of General Safety Instruction GSI-M3 “Special Equipment” (version 1).   General Safety Instruction GSI-M-1 “Lifting equipment and accessories”: http://cern.ch/safety-rules/GSI-M-1_ENv2.htm; this GSI-M-1 (version 2) cancels and replaces GSI-M1 (version 1). Specific Safety Instruction SSI-M-1-1 “Slings and lifting chains”: http://cern.ch/safety-rules/SSI-M-1-1_EN.htm; Specific Safety Instruction SSI-M-1-2 “Cranes, bridge cranes, gantry cranes and power-driven hoists”: http://cern.ch/safety-rules/SSI-M-1-2_EN.htm; Specific Safety Instruction SSI-M-1-3 “Non-f...

Trends in pharmacy staff's perception of patient safety in Swedish community pharmacies after re-regulation of conditions.

Science.gov (United States)

Kälvemark Sporrong, Sofia; Nordén-Hägg, Annika

2014-10-01

All changes in the regulation of pharmacies have an impact on the work carried out in pharmacies and also on patient safety, regardless of whether this is the intention or not. To compare staff apprehension regarding some aspects of patient safety and quality in community pharmacies prior to and after the 2009 changes in regulation of the Swedish community pharmacy market. Questionnaires targeted at pharmacy staff before and after the changes in regulation (in 2008, 2011/12, and 2012/13 respectively) used four identical items, making comparisons of some aspects possible. All four items demonstrated a significant decrease in the first survey after the changes as compared to before. In the second survey significant differences were found on the two items representing safety climate whereas the items representing team climate and management showed no significant differences. The comparison carried out in this study indicates a negative effect in Swedish community pharmacies on safety and quality issues, as experienced by pharmacy staff. It is recommended that the possible effects of healthcare reforms are assessed before implementation, in order to counteract conceivable decline in factors including patient safety and working conditions.

Stakeholder confidence in effective safety regulation. A regulator's view on the role of independent research capability

International Nuclear Information System (INIS)

Kotra, Janet; Mohanty, Sitakanto

2006-01-01

The authors provided a regulator's view on the role of independent research capability and its relationship to stakeholder confidence. They underscored the NRC's commitment to regulatory openness in its Strategic Plan. A number of actions have been adopted to achieve openness: public access to information about risks, safety and licensee performance that is accurate and timely; enhanced awareness of NRC as an independent regulator; fair and timely process for public involvement in NRC's decision-making; and early public involvement and two-way communication to enhance public confidence in NRC's regulatory process. The presentation reviewed the ways through which the NRC seeks to inspire confidence in its process as independent regulator and in future decisions concerning whether to authorize the U.S. DOE to construct the proposed repository at Yucca Mountain. Key to this will be reviewing all information objectively, making open decisions based on sound, scientific judgements about the facts; and maintaining an open and fair public process, and accessing independent R and D. It was noted that among the requirements for the safety review for the Yucca Mountain repository will be extensive technical and scientific analyses, evaluation of expert judgement, and long-range modelling assessments of expected repository performance. NRC requires independent scientific and engineering analyses to develop technical bases for regulations and guidance; evaluate adequacy of DOE's safety case for a potential repository; assist preparation of NRC Safety Evaluation Report; provide technical support for NRC testimony during licensing hearing; and develop effective outreach and communication tools. Confidence in NRC's use of science and engineering will depend upon: competence; independence; open and fair process; regulatory outcomes that are subject to verification and monitoring. To assist, the NRC established the Centre for Nuclear Waste Regulatory

Improving versus maintaining nuclear safety

International Nuclear Information System (INIS)

2002-01-01

The concept of improving nuclear safety versus maintaining it has been discussed at a number of nuclear regulators meetings in recent years. National reports have indicated that there are philosophical differences between NEA member countries about whether their regulatory approaches require licensees to continuously improve nuclear safety or to continuously maintain it. It has been concluded that, while the actual level of safety achieved in all member countries is probably much the same, this is difficult to prove in a quantitative way. In practice, all regulatory approaches require improvements to be made to correct deficiencies and when otherwise warranted. Based on contributions from members of the NEA Committee on Nuclear Regulatory Activities (CNRA), this publication provides an overview of current nuclear regulatory philosophies and approaches, as well as insights into a selection of public perception issues. This publication's intended audience is primarily nuclear safety regulators, but government authorities, nuclear power plant operators and the general public may also be interested. (author)

How do general practitioners use 'safety netting' in acutely ill children?

Science.gov (United States)

Bertheloot, Karen; Deraeve, Pieterjan; Vermandere, Mieke; Aertgeerts, Bert; Lemiengre, Marieke; De Sutter, An; Buntinx, Frank; Verbakel, Jan Y

2016-01-01

'Safety netting' advice allows general practitioners (GPs) to cope with diagnostic uncertainty in primary care. It informs patients on 'red flag' features and when and how to seek further help. There is, however, insufficient evidence to support useful choices regarding 'safety netting' procedures. To explore how GPs apply 'safety netting' in acutely ill children in Flanders. We designed a qualitative study consisting of semi-structured interviews with 37 GPs across Flanders. Two researchers performed qualitative analysis based on grounded theory components. Although unfamiliar with the term, GPs perform 'safety netting' in every acutely ill child, guided by their intuition without the use of specific guidelines. They communicate 'red flag' features, expected time course of illness and how and when to re-consult and try to tailor their advice to the context, patient and specific illness. Overall, GPs perceive 'safety netting' as an important element of the consultation, acknowledging personal and parental limitations, such as parents' interpretation of their advice. GPs do not feel a need for any form of support in the near future. GPs apply 'safety netting' intuitively and tailor the content. Further research should focus on the impact of 'safety netting' on morbidity and how the advice is conveyed to parents.

Status of safety in nuclear facilities - 2012. AREVA General Inspectorate Annual report

International Nuclear Information System (INIS)

2013-05-01

After a message from the Areva's Chief Executive Officer and a message from the senior Vice President of safety, health, security, sustainable development, a text by the inspector general comments the key safety results (events, dose levels, radiological impacts), the inspection findings, the areas of vigilance (relationship with the ASN, the management of the criticality risk, and facility compliance), some significant topics after the Fukushima accident. Then this report addresses the status of nuclear safety and radiation protection in the group's facilities and operations. It more specifically addresses the context and findings (lessons learned from the inspections, operating experience from event, employee radiation monitoring, environmental monitoring), crosscutting processes (safety management, controlling facility compliance, subcontractor guidance and management, crisis management), specific risks (criticality risk, fire hazards, transportation safety, radioactive waste management, pollution prevention, liability mitigation and dismantling), and areas for improvement and outlook

Software important to safety in nuclear power plants

International Nuclear Information System (INIS)

1994-01-01

The report provides guidance on current practices, documenting their strengths and weaknesses for dealing with the important issues of software engineering that nuclear power plant system designers, software producers and regulators are facing. The focus of the report is on safety critical applications of general purpose processors controlled by custom developed software; however, it should also have application in safety related applications and for other types of computers. In addition to system designers, software producers and regulators, the intended readership of this report includes users of software based systems, who should be aware of the relevant issues in specifying and obtaining software for systems important to safety. Refs, 1 fig., tabs

Development of safety evaluation methods and analysis codes applied to the safety regulations for the design and construction stage of fast breeder reactor

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The purposes of this study are to develop the safety evaluation methods and analysis codes needed in the design and construction stage of fast breeder reactor (FBR). In JFY 2012, the following results are obtained. As for the development of safety evaluation methods needed in the safety examination conducted for the reactor establishment permission, development of the analysis codes, such as core damage analysis code, were carried out following the planned schedule. As for the development of the safety evaluation method needed for the risk informed safety regulation, the quantification technique of the event tree using the Continuous Markov chain Monte Carlo method (CMMC method) were studied. (author)

Improved nuclear power plant operations through performance-based safety regulation

International Nuclear Information System (INIS)

Golay, M.W.

1998-01-01

The US Nuclear Regulatory Commission (NRC) has recently instituted use of Risk-Informed, Performance-Based Regulation (RIPBR) for protecting public safety in the use of nuclear power. This was done most importantly during June 1997 in issuance of revised Regulatory Guides and Standard Review Plan (SRP) guidance to licensees and the NRC staff. The propose of RIPBR is to replace the previously-used system of prescriptive regulation, which focuses upon what licensees must do, to a system which focuses upon what they must achieve. RIPBR is goals-oriented and the previous system is means-oriented. This regulatory change is potentially revolutionary, and offers many opportunities for improving the efficiency of improving both nuclear power operations and safety. However, it must be nurtured carefully if is to be successful. The work reported in this paper is concerned with showing how RIPBR can be implemented successfully, with benefits in both areas being attained. It is also concerned with how several of the practical barriers to establishing a workable new regulatory system can be overcome. This work, sponsored by the US Dept. of Energy, is being performed in collaboration with Northeast Utilities Services Crop. and the Idaho National Engineering Laboratory. In our work we have examined a practical safety-related example at the Millstone 3 nuclear power station for implementation of RIPBR. In this examination we have formulated a set of modifications to the plant's technical specifications, and are in the process of investigating their bases and refining the modifications. (author)

Occupational safety and health law handbook

Energy Technology Data Exchange (ETDEWEB)

Sarvadi, D.G. [ed.; Keller; Heckman

1999-09-01

This book reviews the regulations and standards governing the protection of employees in the workplace and provides insight into dealing with pertinent regulations and regulatory authorities. Written for safety professionals, industrial hygienists, human resource professionals, attorneys, and students, this companion to Government Institutes' best-selling ``Environmental Law Handbook'' offers the legal fundamentals behind occupational safety and health laws in one concise and authoritative volume. In 19 chapters, the authoring law firm of Keller and Heckman cover the OSHAct and its development; OSHA, NIOSH, and OSHRC; the roles played by other regulatory agencies; the OSHA rulemaking process; OSHA Standards and the General Duty Clause; record keeping and reporting; employers' and employees' rights; inspections; violations, penalties, and how to contest them; criminal prosecutions; state plans; industry-specific issues; OSHA reform; and international regulations and standards. This book references approximately 400 seminal OSHA legal decisions from the approximately 1,300 cases on record and includes coverage of Canadian and European Community regulations, making it the first comprehensive global overview of occupational safety and health law.

TOWARD MORE EFFECTIVE REGULATION

Energy Technology Data Exchange (ETDEWEB)

J. GRAF

2000-06-01

This paper proposes a model relationship between the operator engaged in a hazardous activity, the regulator of that activity, and the general public. The roles and responsibilities of each entity are described in a way that allows effective communication flow. The role of the regulator is developed using the steam boiler as an example of a hazard subject to regulation; however, the model applies to any regulated activity. In this model the safety analyst has the extremely important role of communicating sometimes difficult technical information to the regulator in a way that the regulator can provide credible assurance to the general public as to the adequacy of the control of the hazardous activity. The conclusion asserts that acceptance of the model, understanding of the roles and responsibilities and definition of who communicates what information to whom will mitigate frustration on the part of each of the three entities.

White paper on nuclear safety in 1981

International Nuclear Information System (INIS)

1981-01-01

The measures to research, develop and utilize atomic energy in Japan have been strengthened since the Atomic Energy Act was instituted in 1955, always on the major premise of securing the safety. The Nuclear Safety Commission established in October, 1978, has executed various measures to protect the health and safety of the nation as the center of the atomic energy safety regulation administration in Japan. Now, the Nuclear Safety Commission has published this annual report on atomic energy safety, summarizing various activities for securing the safety of atomic energy since its establishment to the end of March, 1981. This report is the inaugural issue, and the course till the Nuclear Safety Commission has made its start is also described. The report is composed of general remarks, response to the TMI accident, the safety regulation and security of nuclear facilities, the treatment and disposal of radioactive wastes, the investigation of environmental radioactivity, the countermeasures for preventing disasters around nuclear power stations and others, the research on the safety of atomic energy, international cooperation, and the improvement of the basis for securing the safety. Various related materials are attached. (Kako, I.)

A general description of the Swedish radiation protection regulations of radioactive sources

International Nuclear Information System (INIS)

Staalnacke, C.-G.

2001-01-01

The regulation of ionizing radiation in Sweden is based on both the Radiation Protection Act and Ordinance from 1998. The Swedish Radiation Protection Institute (SSI) acts as the regulatory authority for radiation safety and issues detailed regulations in specific areas. The report summarizes how the SSI controls radiation sources, including orphan sources for which a process for analyzing their occurrence has started in Sweden. A number of proposed procedures for the control and follow-up of sealed radioactive sources is provided. (author)

49 CFR 587.13 - General description.

Science.gov (United States)

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Offset Deformable Barrier § 587.13 General description. The offset deformable barrier is comprised of two elements: a fixed rigid barrier and...

Objective and character of safety culture

International Nuclear Information System (INIS)

Aastrand, K.

2005-01-01

The main topics of the lecture include: (1) concepts of safety culture introduced in INSAG-4, (2) stages of development of safety culture, (3) general practises to develop organizational effectiveness as a means of implementing and improving safety culture, (4) specific practises to develop safety culture applying to all stages of a nuclear installation's life cycle, (5) suggestions on assessing the progress of development of safety culture in an organization and on evaluating the influence of major environmental and internal organizational factors on that culture, and (6) guidance on the detection of incipient weaknesses in safety culture that may be of particular interest to regulators and those responsible for self-assessment in organization

A double-regulated oncolytic adenovirus with improved safety for adenocarcinoma therapy

International Nuclear Information System (INIS)

Wei, Na; Fan, Jun Kai; Gu, Jin Fa; He, Ling Feng; Tang, Wen Hao; Cao, Xin; Liu, Xin Yuan

2009-01-01

Safety and efficiency are equally important to be considered in developing oncolytic adenovirus. Previously, we have reported that ZD55, an oncolytic adenovirus with the deletion of E1B-55K gene, exhibited potent antitumor activity. In this study, to improve the safety of ZD55, we utilized MUC1 promoter to replace the native promoter of E1A on the basis of ZD55, and generated a double-regulated adenovirus, named MUD55. Our data demonstrated that the expression of early and late genes of MUD55 was both reduced in MUC1-negative cells, resulting in its stricter glandular-tumor selective progeny production. The cytopathic effect of MUD55 was about 10-fold lower than mono-regulated adenovirus ZD55 or Ad.MUC1 in normal cells and not obviously attenuated in glandular tumor cells. Moreover, MUD55 showed the least liver toxicity when administrated by intravenous injection in nude mice. These results indicate that MUD55 could be a promising candidate for the treatment of adenocarcinoma.

The costs of uncertainty: regulating health and safety in the Canadian uranium industry

International Nuclear Information System (INIS)

Robinson, I.

1982-04-01

Federalism, and particularly federal/provincial jurisdictional relationships, have led to considerable uncertainty in the regulation of occupational health and safety and of environmental protection in the Canadian uranium mining industry. The two principal uranium producing provinces in Canada are Saskatchewan and Ontario. Since 1978, in an attempt to avoid constitutional issues, both these provinces and the federal government as well have proceeded unilaterally with health and safety reforms for the industry. In Saskatchewan this has resulted in areas of overlapping jurisdiction, which have led to uncertainty over the legal enforceability of the provincial regulations. In Ontario, the province has left significant gaps in the protection of both workers and the environment. Little progress can be expected in eliminating these gaps and overlaps until the current administrative and jurisdictional arrangements are understood

A philosophy for space nuclear systems safety

International Nuclear Information System (INIS)

Marshall, A.C.

1992-01-01

The unique requirements and contraints of space nuclear systems require careful consideration in the development of a safety policy. The Nuclear Safety Policy Working Group (NSPWG) for the Space Exploration Initiative has proposed a hierarchical approach with safety policy at the top of the hierarchy. This policy allows safety requirements to be tailored to specific applications while still providing reassurance to regulators and the general public that the necessary measures have been taken to assure safe application of space nuclear systems. The safety policy used by the NSPWG is recommended for all space nuclear programs and missions

The Inspector General's report on Nuclear Safety and Radiation Protection 2013

International Nuclear Information System (INIS)

2014-01-01

This report, written for the Chairman of EDF, gives the Inspector General's assessment of nuclear safety and radiation protection within the EDF Group. The report is also intended for all those in the company who contribute in any way to nuclear safety and radiation protection through their day-to-day actions and decisions. It also aims to identify any early warning signs and recommend areas for improvement. It therefore focuses on difficulties and weaknesses rather than strengths and progress. It is based on information gathered and observations made during the year, both in France and the UK, whether from workers in the field, or during visits to plants and meetings with the main stakeholders: managers, staff representatives, members of the medical profession, chairmen of local information commissions in France and of Site stakeholder groups (British equivalent of the French Local Information Commissions) in the UK, and contractors. It also makes use of visits and comparisons with other international players on the nuclear scene, and of dialogue with WANO (World Association of Nuclear Operators) and the nuclear safety authorities. Content: 1 - the Inspector General's view of 2013 2 - Safety in operation: good standing of results; 3 - Management of safety priority; 4 - Occupational safety: managers mobilization is necessary in France; 5 - Radiation protection: a new dynamics to initiate; 6 - Maintenance: regaining the essentials for the great careening; 7 - Fostering occupations to improve safety; 8 - A new momentum to the EPRs; 9 - Nuclear fuel, a major contribution to safety; 10 - Research-development: a lever to anticipate; 11 - Japan: safety under reconstruction; 12 - Noteworthy operational events; 13- Appendices: Results for the nuclear fleets (EDF SA, EDF Energy; Maps of the nuclear power plants(EDF SA, EDF Energy); Key dates for the nuclear units (EDF SA, EDF Energy); Abbreviations

Does Preschool Self-Regulation Predict Later Behavior Problems in General or Specific Problem Behaviors?

Science.gov (United States)

Lonigan, Christopher J; Spiegel, Jamie A; Goodrich, J Marc; Morris, Brittany M; Osborne, Colleen M; Lerner, Matthew D; Phillips, Beth M

2017-11-01

Findings from prior research have consistently indicated significant associations between self-regulation and externalizing behaviors. Significant associations have also been reported between children's language skills and both externalizing behaviors and self-regulation. Few studies to date, however, have examined these relations longitudinally, simultaneously, or with respect to unique clusters of externalizing problems. The current study examined the influence of preschool self-regulation on general and specific externalizing behavior problems in early elementary school and whether these relations were independent of associations between language, self-regulation, and externalizing behaviors in a sample of 815 children (44% female). Additionally, given a general pattern of sex differences in the presentations of externalizing behavior problems, self-regulation, and language skills, sex differences for these associations were examined. Results indicated unique relations of preschool self-regulation and language with both general externalizing behavior problems and specific problems of inattention. In general, self-regulation was a stronger longitudinal correlate of externalizing behavior for boys than it was for girls, and language was a stronger longitudinal predictor of hyperactive/impulsive behavior for girls than it was for boys.

The nuclear regulatory challenge of judging safety back fits

International Nuclear Information System (INIS)

2002-01-01

The economic pressures of electricity market competition have led nuclear power plant operators to seek ways to increase electricity production and to reduce operating costs at their plants. Corresponding pressures on the regulatory bodies include operator demand to reduce regulatory burdens perceived as unnecessary and general resistance to consider safety back-fits sought by the regulator. The purpose of this report is to describe potential situations giving rise to safety back-fit questions and to discuss regulatory approaches for judging the back-fits. The intended audience for this report is primarily nuclear regulators, although the information and ideas may also be of interest to nuclear operating organisations, other industry organisations and the general public. (author)

SOS-1 seminar about safety culture

International Nuclear Information System (INIS)

Wahlstroem, B.; Hammar, L.

2000-01-01

The aim of the seminar was to discuss safety culture in nuclear power utilities, and to exchange experiences about how the term safety culture is accepted by the personnel. The titles of the presentations are: 1) Organisational culture. General ideas as basis for organising; 2) Safety culture - ability and will; 3) View on safety culture at Swedish and Finnish nuclear power plants; 4) Safety culture at Barsebaeck Power Company; 5) Safety culture at Olkiluoto Nuclear Power Plant; 6) How do we improve the safety culture at OKG AB?; 7) Safety culture activities at Ringhals; 8) Aspects in relation to safety culture; 9) Development of regulatory activities/effectiveness of STUK - development as an aspect of culture; 10) Organisational culture research at STUK's Department of Nuclear Reactor Regulation; 11) The IAEA safety culture services; 12) Industrial safety - different perspectives and cultures. (EHS)

Ethical issues in engineering design processes ; regulative frameworks for safety and sustainability

NARCIS (Netherlands)

Gorp, A. van

2007-01-01

The ways designers deal with ethical issues that arise in their consideration of safety and sustainability in engineering design processes are described. In the case studies, upon which this article is based, a difference can be seen between normal and radical design. Designers refer to regulative

Reference values on safety regulation of land disposal of low level radioactive solid waste (the second interim report) and its incorporation into legal regulations

International Nuclear Information System (INIS)

Aoki, Terumi

1994-01-01

Safety regulation of land disposal of low level radioactive solid waste in Japan is based on 'the basic philosophy on the safety regulation of land disposal of low level radioactive solid waste' determined by the Nuclear safety Committee (October 1985). The basic philosophy on the upper limit of radioactivity of disposed wastes was published as the reference values in the interim report (February 1987) and in the second interim report (June 1992). In the second interim report, the upper limits of radioactivity are established for three types of solid radioactive wastes: 1) metals, incombustible or flame resistant wastes generated nuclear reactor facilities and solidified in vessels, 2) large metallic structures generated from decommissioning of reactor facilities and difficult to solidify in vessels, and 3) radioactive concrete waste generated from decommissioning of reactor facilities. The upper limits of radioactivity are presented for C-14, Co-60, Ni-63, Sr-90, Cs-137, alfa-emmitters, Ca-41 (for concrete) and Eu-152 (for concrete). Related laws and regulations in Japan on safe disposal of low level wastes are explained. (T.H.)

Food Safety Regulation and Firm Productivity: Evidence from the French Food Industry

OpenAIRE

Requillart, Vincent; Nauges, Celine; Simioni, Michel; Bontemps, Christophe

2012-01-01

The purpose of this article is to assess whether food safety regulations imposed by the European Union in the 2000s may have induced a slow-down in the productivity of firms in the food processing sector. The impact of regulations on costs and productivity has seldom been studied. This article contributes to the literature by measuring productivity change using a panel of French food processing firms for the years 1996 to 2006. To do so, we develop an original iterative testing procedure b...

National report of the Slovak Republic compiled according to the terms of the convention on nuclear safety

International Nuclear Information System (INIS)

Adamovsky, V.; Betak, A.; Balaj, J.; Bystricka, S.; Grebeciova, J.; Husarcek, J.; Metke, E.; Pospisil, M.; Smrtnik, I.; Turner, M.; Uhrik, P.; Zemanova, D.; Bulla, R.; Filip, A.; Jurina, V.; Sedlak, M.; Tomek, J.; Zimermann, M.

2013-06-01

A brief safety report of the Slovak Republic in 2013 is presented. A account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD) is presented. These activities are reported under the headings: (1) Introduction; (2) Nuclear installations in Slovak Republic in terms of the convention; (3) Legislation and regulation; (4) General safety aspects; (5) Safety of nuclear installations in the Slovak Republic; ((6) Annexes; (6.1) List of nuclear installations and technical and economic indicators; (6.2) Selected generally binding legal regulations and safety guidelines in relation to nuclear and radiation safety; (6.3) List of selected national and international documents applicable to safety of nuclear installations; (6.4) Limits for radioactive discharges; (6.5) IAEA Action Plan on Nuclear Safety; (6.6) Team of authors.

33 CFR 165.T09-1080 - Safety Zone and Regulated Navigation Area, Chicago Sanitary and Ship Canal, Romeoville, IL.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety Zone and Regulated Navigation Area, Chicago Sanitary and Ship Canal, Romeoville, IL. 165.T09-1080 Section 165.T09-1080 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED...

Numerical assessment of conventional regulation effectiveness for ...

African Journals Online (AJOL)

... depends on fire safety engineering that is provided, and which is generally established using smoke spread field and temperature distribution predictions. ... conventional regulation; ventilation strategies; smoke temperature; smoke barriers ...

Nuclear safety in France: Extracts from 'Revue Generale Nucleaire'

International Nuclear Information System (INIS)

1979-07-01

Translations of 3 articles are included in this report. The first covers briefly the tasks and organisation of the Institute of Nuclear Protection and Safety (IPSN) in France. In the second article the principles of cost effectiveness are described and the applications of the general methodology to radiation protection is outlined. A study by the US Environmental Protection Agency is summarised. Methods for risk estimation in nuclear energy are presented in the final article

U.S. ALMR safety approach and licensing status

International Nuclear Information System (INIS)

Hardy, R.W.; Gyorey, G.L.

1991-01-01

The Advanced Liquid Metal Cooled Reactor in the United States is based on the PRISM concept originated by General Electric. This concept features a compact modular system suitable for factory fabrication, and a high degree of passive and natural safety characteristics. The safety approach emphasizes accident prevention, backed up by accident mitigation as required. First-round safety evaluations by the U.S. regulators have found that the design provides passive, natural and other desirable features enhancing the safety of the power plant. Licensing review continuing. (author)

Food safety regulations in Australia and New Zealand Food Standards.

Science.gov (United States)

Ghosh, Dilip

2014-08-01

Citizens of Australia and New Zealand recognise that food security is a major global issue. Food security also affects Australia and New Zealand's status as premier food exporting nations and the health and wellbeing of the Australasian population. Australia is uniquely positioned to help build a resilient food value chain and support programs aimed at addressing existing and emerging food security challenges. The Australian food governance system is fragmented and less transparent, being largely in the hands of government and semi-governmental regulatory authorities. The high level of consumer trust in Australian food governance suggests that this may be habitual and taken for granted, arising from a lack of negative experiences of food safety. In New Zealand the Ministry of Primary Industries regulates food safety issues. To improve trade and food safety, New Zealand and Australia work together through Food Standards Australia New Zealand (FSANZ) and other co-operative agreements. Although the potential risks to the food supply are dynamic and constantly changing, the demand, requirement and supply for providing safe food remains firm. The Australasian food industry will need to continually develop its system that supports the food safety program with the help of scientific investigations that underpin the assurance of what is and is not safe. The incorporation of a comprehensive and validated food safety program is one of the total quality management systems that will ensure that all areas of potential problems are being addressed by industry. © 2014 Society of Chemical Industry.

Regulations for marine microalgal toxins: Towards harmonization of ...

African Journals Online (AJOL)

The World Trade Organization and the General Agreements on Tariffs and Trade encourage the harmonization of regulations on food safety requirements. The current policy on trade liberalization of seafood is presented, together with a review of the regulations for marine microalgal toxins. Activities on harmonization of ...

The use of non-animal alternatives in the safety evaluations of cosmetics ingredients by the Scientific Committee on Consumer Safety (SCCS).

Science.gov (United States)

Vinardell, M P

2015-03-01

In Europe, the safety evaluation of cosmetics is based on the safety evaluation of each individual ingredient. Article 3 of the Cosmetics Regulation specifies that a cosmetic product made available on the market is to be safe for human health when used normally or under reasonably foreseeable conditions. For substances that cause some concern with respect to human health (e.g., colourants, preservatives, UV-filters), safety is evaluated at the Commission level by a scientific committee, presently called the Scientific Committee on Consumer Safety (SCCS). According to the Cosmetics Regulations, in the EU, the marketing of cosmetics products and their ingredients that have been tested on animals for most of their human health effects, including acute toxicity, is prohibited. Nevertheless, any study dating from before this prohibition took effect is accepted for the safety assessment of cosmetics ingredients. The in vitro methods reported in the dossiers submitted to the SCCS are here evaluated from the published reports issued by the scientific committee of the Directorate General of Health and Consumers (DG SANCO); responsible for the safety of cosmetics ingredients. The number of studies submitted to the SCCS that do not involve animals is still low and in general the safety of cosmetics ingredients is based on in vivo studies performed before the prohibition. Copyright © 2014 Elsevier Inc. All rights reserved.

A primer of drug safety surveillance: an industry perspective. Part I: Information flow, new drug development, and federal regulations.

Science.gov (United States)

Allan, M C

1992-01-01

To place the fundamentals of clinical drug safety surveillance in a conceptual framework that will facilitate understanding and application of adverse drug event data to protect the health of the public and support a market for pharmaceutical manufacturers' products. Part I of this series provides a background for the discussion of drug safety by defining the basic terms and showing the flow of safety information through a pharmaceutical company. The customers for adverse drug event data are identified to provide a basis for providing quality service. The development of a drug product is briefly reviewed to show the evolution of safety data. Drug development and safety are defined by federal regulations. These regulations are developed by the FDA with information from pharmaceutical manufacturers. The intent of the regulations and the accompanying guidelines is described. An illustration from the news media is cited to show an alternative, positive approach to handling an adverse event report. This review uses primary sources from the federal laws (regulations), commentaries, and summaries. Very complex topics are briefly summarized in the text and additional readings are presented in an appendix. Secondary sources, ranging from newspaper articles to judicial summaries, illustrate the interpretation of adverse drug events and opportunities for drug safety surveillance intervention. The reference materials used were articles theoretically or practically applicable in the day-to-day practice of drug safety surveillance. The role of clinical drug safety surveillance in product monitoring and drug development is described. The process of drug safety surveillance is defined by the Food and Drug Administration regulations, product labeling, product knowledge, and database management. Database management is subdivided into the functions of receipt, retention, retrieval, and review of adverse event reports. Emphasis is placed on the dynamic interaction ;of the components

NRC safety research in support of regulation, 1986

International Nuclear Information System (INIS)

1987-09-01

This report is the second in a series of annual reports responding to congressional inquiries as to the utilization of nuclear regulatory research. NUREG-1175, ''NRC Safety Research in Support of Regulation,'' published in May 1986, reported major research accomplishments between about FY 1980 and FY 1985. This report narrates the accomplishments of FY 1986 and does not restate earlier accomplishments. Earlier research results are mentioned in the context of current results in the interest of continuity. Both the direct contributions to scientific and technical knowledge and their regulatory applications, when there has been a definite regulatory outcome during FY 1986, have been described

Upholding science in health, safety and environmental risk assessments and regulations

International Nuclear Information System (INIS)

Aschner, Michael; Autrup, Herman N.; Berry, Sir Colin L.; Boobis, Alan R.; Cohen, Samuel M.; Creppy, Edmond E.; Dekant, Wolfgang; Doull, John; Galli, Corrado L.; Goodman, Jay I.; Gori, Gio B.; Greim, Helmut A.; Joudrier, Philippe

2016-01-01

A public appeal has been advanced by a large group of scientists, concerned that science has been misused in attempting to quantify and regulate unmeasurable hazards and risks. The appeal recalls that science is unable to evaluate hazards that cannot be measured, and that science in such cases should not be invoked to justify risk assessments in health, safety and environmental regulations. The appeal also notes that most national and international statutes delineating the discretion of regulators are ambiguous about what rules of evidence ought to apply. Those statutes should be revised to ensure that the evidence for regulatory action is grounded on the standards of the scientific method, whenever feasible. When independent scientific evidence is not possible, policies and regulations should be informed by publicly debated trade-offs between socially desirable uses and social perceptions of affordable precaution. This article explores the premises, implications and actions supporting the appeal and its objectives.

Food safety regulatory systems in Europe and China：A study of how co-regulation can improve regulatory effectiveness

Institute of Scientific and Technical Information of China (English)

Kevin Chen; WANG Xin-xin; SONG Hai-ying

2015-01-01

Food safety has received a great deal of attention in both developed and developing countries in recent years. In China, the numerous food scandals and scares that have struck over the past decade have spurred signiifcant food safety regulatory reform, which has been increasingly oriented towards the public-private partnership model adopted by the Europe Union’s (EU) food safety regulatory system. This paper analyzes the development of both the EU’s and China’s food safety regu-latory systems, identiifes the current chalenges for China and additionaly considers the role of public-private partnership. The success of co-regulation in the food regulatory system would bring signiifcant beneifts and opportunities for China. Finaly, this paper recommends additional measures like training and grants to improve the private’s sector effectiveness in co-regulating China’s food safety issues.

Health and safety regulation of uranium mining and milling

International Nuclear Information System (INIS)

Dory, A.B.

1980-07-01

The Canadian Atomic Energy Control Board licenses all nuclear facilities in Canada, including uranium mines and mills. The protection of health, safety and the environment is one of the requirements of each licence. A limit of 4 Working Level Months exposure to radon and radon daughters annually has been set, and guidelines for weekly or more frequent workplace monitoring have been established. Personal monitoring devices are being tested, and thermoluminescent dosimeters are to be introduced. The Board reviews its licensees' ventilation plans continuously. The staged licensing process involves the granting of the following documents: 1) ore removal; 2) underground exploration permit; 3) site and construction approval; 4) mining facility operating licence; 5) shut-down approval. Compliance with regulations and licence conditions is monitored mainly by inspectors appointed by provincial agencies, with Board staff exercising auditing fuctions. The Board involves the workers directly with their own health and safety by sending their unions copies of all relevant documents and inviting comments

Use of Opioid Medications for Employees in Critical Safety or Security Positions and Positions with Safety Sensitive Duties

Science.gov (United States)

2017-01-30

can cause harm) to the physical well-being of or jeopardize the security of the employee , co-workers, customers or the general public through a lapse...DEPARTMENT OF THE ARMY US ARMY PUBLIC HEALTH CENTER 5158 BLACKHAWK ROAD ABERDEEN PROVING GROUND MARYLAND 21010-5403 Directorate of Clinical... Employees in Critical Safety or Security Positions and Positions with Safety Sensitive Duties. 1. REFERENCES. A. Army Regulation 40-5, Preventive

Ventilation in nuclear facilities. Organisation of nuclear safety in France

International Nuclear Information System (INIS)

Bouhet, J.C.

1982-01-01

Having defined safety and analysis of safety, the nature and significance of nuclear hazards are indicated, highlighting the importance of ventilation for safety. The authorization procedure for the creation and commissioning of an installation is also indicated. The list of safety organizations in France is given. Mention is then made of the general technical regulations, their aim and working out. To conclude, normalization and its application to the ventilation of nuclear installations is examined [fr

76 FR 27897 - Security and Safety Zone Regulations, Large Passenger Vessel Protection, Captain of the Port...

Science.gov (United States)

2011-05-13

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2011-0342] Security and Safety Zone Regulations, Large Passenger Vessel Protection, Captain of the Port Columbia River... will enforce the security and safety zone in 33 CFR 165.1318 for large passenger vessels operating in...

75 FR 16370 - Regulated Navigation Areas, Safety Zones, Security Zones; Deepwater Ports in Boston Captain of...

Science.gov (United States)

2010-04-01

... rule under Executive Order 13045, Protection of Children from Environmental Health Risks and Safety Risks. This rule is not an economically significant rule and would not create an environmental risk to...] RIN 1625-AA00, RIN 1625-AA11 Regulated Navigation Areas, Safety Zones, Security Zones; Deepwater Ports...

Protectionism or Legitimate Regulations: What can Trade Partners Expect from the New US Food Safety Regime?

OpenAIRE

Nakuja, T.; Kerr, William A.

2013-01-01

In January 2011, the US passed the Food Safety Modernization Act (FSMA) which represents a major legislative initiative to revise and strengthen the regulatory regime pertaining to foodborne illness and contamination. The tightening of the regulatory regime was justified on the basis of a number of high-profile foodborne disease incidents, which are claimed to have undermined public confidence in the US food safety system. While tightening food safety regulations inevitably increase barriers ...

Periodic Safety Review in Interim Storage Facilities - Current Regulation and Experiences in Germany

International Nuclear Information System (INIS)

Neles, Julia Mareike; Schmidt, Gerhard

2014-01-01

Periodic safety reviews in nuclear power plants in Germany have been performed since the end of the 1980's as an indirect follow-up of the accident in Chernobyl and, in the meantime, are formally required by law. During this process the guidelines governing this review were developed in stages and reached their final form in 1996. Interim storage facilities and other nuclear facilities at that time were not included, so the guidelines were solely focused on the specific safety issues of nuclear power plants. Following IAEA's recommendations, the Western European Nuclear Regulator Association (WENRA) introduced PSRs in its safety reference levels for storage facilities (current version in WGWD report 2.1 as of Feb 2011: SRLs 59 - 61). Based on these formulations, Germany improved its regulation in 2010 with a recommendation of the Nuclear Waste Management Commission (Entsorgungskommission, ESK), an expert advisory commission for the federal regulatory body BMU. The ESK formulated these detailed requirements in the 'ESK recommendation for guides to the performance of periodic safety reviews for interim storage facilities for irradiated fuel elements and heat-generating radioactive waste'. Before finalization of the guideline a test phase was introduced, aimed to test the new regulation in practice and to later include the lessons learned in the final formulation of the guideline. The two-year test phase started in October 2011 in which the performance of a PSR will be tested at two selected interim storage facilities. Currently these recommendations are discussed with interested/concerned institutions. The results of the test phase shall be considered for improvements of the draft and during the final preparation of guidelines. Currently the PSR for the first ISF is in an advanced stage, the second facility just started the process. Preliminary conclusions from the test phase show that the implementation of the draft guideline requires interpretation. The aim of a

Safety guide on fire protection in nuclear power plants

International Nuclear Information System (INIS)

1976-01-01

The purpose of the Safety Guide is to give specific design and operational guidance for protection from fire and explosion in nuclear power plants, based on the general guidance given in the relevant sections of the 'Safety Code of Practice - Design' and the 'Safety Code of Practice - Operation' of the International Atomic Energy Agency. The guide will confine itself to fire protection of safety systems and items important to safety, leaving the non-safety matters of fire protection in nuclear power plants to be decided upon the basis of the various available national and international practices and regulations. (HP) [de

Occupational Safety and Health Act Handbook for Vocational and Technical Education Teachers.

Science.gov (United States)

Shashack, Willard F., Ed.

The purpose of the handbook is to assist the school shop teacher in participating in voluntary compliance with the standards and regulations of the Occupational Safety and Health Act of 1970. The first major section deals with general shop safety and how the shop teacher can use the checklist to control possible safety violations in his shop. The…

5th December 1990 - Royal Order amending the provisions of the General Regulations for protection at work, concerning the protection of workers against the hazards of ionizing radiation

International Nuclear Information System (INIS)

1990-01-01

This Royal Order amending the 1946 General Regulations for the protection of workers against the hazards of ionizing radiation implements on a national level the European Community Directives No. 80/836 Euratom of 15 July 1980 laying down basic safety standards for the health protection of the general public and workers against the hazards of ionizing radiations and No. 84/466 Euratom of 3 September 1984 laying down basic measures for the radiation protection of persons undergoing medical examination or treatment [fr

National report of the Slovak Republic. Compiled according to the terms of the convention on nuclear safety, June 2010

International Nuclear Information System (INIS)

Balaj, J.; Homola, J.; Rovny, J.; Metke, E.; Zemanova, D.; Grebeciova, J.; Turner, M.; Pospisil, M.; Bystricka, S.; Jurina, V.; Rovny, I.; Soltes, L.; Husarova, M.; Petrovic, J.; Fazekasova, H.; Zizkova, D.; Vagac, M.; Maudry, J.; Hacaj, A.; Betak, A.; Barbaric, M.

2010-06-01

A brief safety report of the Slovak Republic in 2010 is presented. A account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD) is presented.These activities are reported under the headings: (1) Introduction; (2) Nuclear installations in Slovak Republic in terms of the convention; (3) Legislation and regulation; (4) General safety aspects; (5) Safety of nuclear installations in Slovakia; ((6) Annexes; (6.1) List of nuclear installations and technical and economic indicators; (6.2) Selected generally binding legal regulations and safety guidelines in relation to nuclear and radiation safety; (6.3) List of selected national and international documents applicable to safety of nuclear installations; (6.4) Limits for radioactive discharges; (6.5) Team of authors.

France - Convention on nuclear safety. Fourth national report established in view of the 2008 examination meeting

International Nuclear Information System (INIS)

2007-07-01

This report is the fourth one established in compliance with the article 5 of the international Convention on nuclear safety, and presents measures implemented by France to meet each of the Convention requirements. It addresses electro-nuclear reactors as well as research reactors. After an overview of the main evolutions since the third French report, and a general presentation of the French national nuclear policy, the report addresses the different articles of the Convention. These articles deal with general arrangements (application arrangements, presentation of reports, existing nuclear installations with their safety assessments and main safety improvements brought to the different nuclear reactors), law and regulation (legal and regulatory framework, regulation bodies, responsibility of an authorization holder), general safety considerations (priority for safety, human and financial resources, human factors, quality insurance, safety assessment and verification, radiation protection, organisation in case of emergency), and installation safety (site selection, design and construction, exploitation, activities planned to improve safety). Appendices propose a list and locations of French nuclear reactors, a list of the main legal and regulatory texts, presentations of nuclear reactor operators (EDF, CEA, ILL), and an overview of practices of control of the environment

Seismic Safety Guide

International Nuclear Information System (INIS)

Eagling, D.G.

1983-09-01

This guide provides managers with practical guidelines for administering a comprehensive earthquake safety program. The Guide is comprehensive with respect to earthquakes in that it covers the most important aspects of natural hazards, site planning, evaluation and rehabilitation of existing buildings, design of new facilities, operational safety, emergency planning, special considerations related to shielding blocks, non-structural elements, lifelines, fire protection and emergency facilities. Management of risk and liabilities is also covered. Nuclear facilities per se are not dealt with specifically. The principles covered also apply generally to nuclear facilities but the design and construction of such structures are subject to special regulations and legal controls

Seismic Safety Guide

Energy Technology Data Exchange (ETDEWEB)

Eagling, D.G. (ed.)

1983-09-01

This guide provides managers with practical guidelines for administering a comprehensive earthquake safety program. The Guide is comprehensive with respect to earthquakes in that it covers the most important aspects of natural hazards, site planning, evaluation and rehabilitation of existing buildings, design of new facilities, operational safety, emergency planning, special considerations related to shielding blocks, non-structural elements, lifelines, fire protection and emergency facilities. Management of risk and liabilities is also covered. Nuclear facilities per se are not dealt with specifically. The principles covered also apply generally to nuclear facilities but the design and construction of such structures are subject to special regulations and legal controls.

76 FR 14590 - Defense Federal Acquisition Regulation Supplement; Safety of Facilities, Infrastructure, and...

Science.gov (United States)

2011-03-17

... makes it unlikely that a small business could afford to sustain the infrastructure required to perform...-AG73 Defense Federal Acquisition Regulation Supplement; Safety of Facilities, Infrastructure, and... facilities, infrastructure, and equipment that are intended for use by military or civilian personnel of the...

The Inspector General's report on Nuclear Safety and Radiation Protection 2016

International Nuclear Information System (INIS)

2017-01-01

This report, written for the Chairman of EDF, gives the Inspector General's assessment of nuclear safety and radiation protection within the EDF Group. The report is also intended for all those in the company who contribute in any way to nuclear safety and radiation protection through their day-to-day actions and decisions. It also aims to identify any early warning signs and recommend areas for improvement. It therefore focuses on difficulties and weaknesses rather than strengths and progress. It is based on information gathered and observations made during the year, both in France and the UK, whether from workers in the field, or during visits to plants and meetings with the main stakeholders: managers, staff representatives, members of the medical profession, chairmen of local information commissions in France and of Site stakeholder groups (British equivalent of the French Local Information Commissions) in the UK, and contractors. It also makes use of visits and comparisons with other international players on the nuclear scene, and of dialogue with WANO (World Association of Nuclear Operators) and the nuclear safety authorities. Content: 1 - the Inspector General's view of 2016; 2 - Operational safety: encouraging results; 3 - High-profile focus on safety; 4 - Risk prevention: effort must be intensified; 5 - Team skills and commitment; 6 - Simplification; 7 - Maintenance quality; 8 - Nuclear fuel; 9 - New build; 10 - Protection against site security threats; 11 - Appendices

Radiation protection and safety in the Australian Defence Organisation (ADO)

International Nuclear Information System (INIS)

Jenks, G.J.; O'Donovan, E.J.B.

1995-01-01

Very few organisations have to address such a diverse and complex range of radiation safety matters as the Australian Defence Organisation. The Australian Defence Force and the Department of Defence (its military and civilian branches) have to comply with strict regulations in normal peace time activities. The Surgeon-General, to whom responsibility for policy in radiation protection and safety falls, has established a Defence Radiation Safety Committee, which in turn oversees four specialist subcommittees. Their tasks include recommending policy and doctrine in relation to radiation safety, overseeing the implementation of appropriate regulations, monitoring their compliance. generating the relevant documentation (particularly on procedures to be followed), developing and improving any necessary training courses, and providing sound technical advice whenever and to whomever required. The internal Defence regulations do not permit radiation doses to exceed those limits recommended by the Australian National Health and Medical Research Council and precautions are taken to ensure during normal peace time duties that these levels are not exceeded. At times of national emergency, the Surgeon-General provides guidance and advice to military commanders on the consequences of receiving dose levels that would not be permitted during normal peace time activities. The paper describes the methods adopted to implement such arrangements

A task management system for compliance with health, safety, and environmental regulations

International Nuclear Information System (INIS)

Crump, J.J.; O'Gorman, T.P.

1992-01-01

Shell Western E and P Inc. (SWEPI) has developed a new computer system to help it comply with health, safety, and environmental (HS and E) regulations. It is a task management system that functions at the detailed inventory level. It schedules work, instructs operations, and records compliance status. This article discusses design and development of the system

Safety research plan, JFY 2013 edition

International Nuclear Information System (INIS)

2013-09-01

As for the regulatory issues the governments or JNES considered necessary, JNES had updated every year 'safety research plan' in respective research areas necessary for solving the regulatory issues (safety research needs) and was conducting safety research to obtain the results, etc. 'Safety research plan, JFY 2013 Edition' was compiled aiming at promotion of appropriate reflection and flexible application of research achievements for tacking the regulatory issues taking account of importance and urgency dependent on trend of nuclear safety regulations as well as collective management of safety research and safety survey. 5 new research projects were established with 4 unified research projects and 6 terminated research projects. Finally modified safety research areas, subjects and research projects, JFY 2013 Edition were as follows: design review of nuclear power plant (7 subjects and each subject having several research projects totaled 19), control management of nuclear power plant (one subject having 4 research projects), nuclear fuel cycle (2 subjects and each subject having several research projects totaled 4), nuclear fuel cycle backend (2 subjects and each subject having several research projects totaled 5), nuclear emergency preparedness and response (3 subjects and each subject having several research projects totaled 7) and bases of nuclear safety technology (3 subjects and each subject having several research projects totaled 6). Safety reviews consisted of 6 projects in 3 areas extracting the regulatory issues. As for urgent research projects on the basis of the disaster at Fukushima Daiichi NPP accident, 7 research projects in 4 urgent subjects were as follows: examination for new safety regulation (4 research projects generalized in the above research projects), development of newly necessary evaluation methods (one research project generalized in the above research project), evaluation of the validity for the work for convergence at Fukushima

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Science.gov (United States)

2010-07-01

... safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public... MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT General Provisions § 102-80.10 What are the basic safety and environmental management policies for real property? The basic safety and...

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Arabic Edition)

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Chinese Edition)

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-03-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (French Edition)

International Nuclear Information System (INIS)

2013-01-01

The IAEA's Statute authorizes the Agency to ''establish or adopt standards of safety for protection of health and minimization of danger to life and property'' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Chinese Edition)

International Nuclear Information System (INIS)

2013-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Arabic Edition)

International Nuclear Information System (INIS)

2012-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Consideration of timescales in the finnish safety regulations for spent fuel disposal

International Nuclear Information System (INIS)

Ruokola, E.

2010-01-01

Esko Ruokola (STUK) presented an example of regulatory approach and explained that the Finnish spent fuel disposal program is progressing towards the construction license stage. The Government Decree on the Safety of Nuclear Waste Disposal which entered into force on 1 St December 2008 will be detailed by a STUK Guide that is currently being updated. These regulations distinguish three post-closure time periods for which different safety criteria are defined: The Environmentally Predictable Future: During this first period, extending up to several thousands of years, predictable environmental changes will occur. People may be exposed to the disposed radioactive substances only due to limited early failures of engineered barriers, due to e.g. fabrication defects. Disposal shall be so designed that as a consequence of expected evolutions: 1. The annual dose to the most exposed members of the public shall remain below 0.1 mSv. 2. The average annual doses to other members of the public shall remain insignificantly low. STUK provides guidance for the different elements of the safety assessment including potential exposure pathways, potential changes in the environment to be considered, assumption on climate change and human habits, as well as the reference conditions for the most exposed individual and people living in the surroundings. Era of Extreme Climate Changes: Beyond about 10 000 years, great climatic changes, such as permafrost and glaciation, will occur and a conservative approach is followed. For this time period, the radiation protection criteria are based on release rates of radionuclides from the geosphere to biosphere (geo-bio flux constraints). The STUK guide specifies the nuclide specific constraints for the activity release to the environment for individual radionuclides. The selected approach by STUK implies that the implementer need not to consider the biosphere scenarios when preparing his safety case for the time period discussed as the regulator

Evaluation of features to support safety and quality in general practice clinical software

Science.gov (United States)

2011-01-01

Background Electronic prescribing is now the norm in many countries. We wished to find out if clinical software systems used by general practitioners in Australia include features (functional capabilities and other characteristics) that facilitate improved patient safety and care, with a focus on quality use of medicines. Methods Seven clinical software systems used in general practice were evaluated. Fifty software features that were previously rated as likely to have a high impact on safety and/or quality of care in general practice were tested and are reported here. Results The range of results for the implementation of 50 features across the 7 clinical software systems was as follows: 17-31 features (34-62%) were fully implemented, 9-13 (18-26%) partially implemented, and 9-20 (18-40%) not implemented. Key findings included: Access to evidence based drug and therapeutic information was limited. Decision support for prescribing was available but varied markedly between systems. During prescribing there was potential for medicine mis-selection in some systems, and linking a medicine with its indication was optional. The definition of 'current medicines' versus 'past medicines' was not always clear. There were limited resources for patients, and some medicines lists for patients were suboptimal. Results were provided to the software vendors, who were keen to improve their systems. Conclusions The clinical systems tested lack some of the features expected to support patient safety and quality of care. Standards and certification for clinical software would ensure that safety features are present and that there is a minimum level of clinical functionality that clinicians could expect to find in any system.

U.S. ALMR safety approach and licensing status

International Nuclear Information System (INIS)

Herczeg, J.W.; Hardy, R.W.; Gyorey, G.L.

1992-01-01

The Advanced Liquid Metal Cooled Reactor (ALMR) in the United States is based on the Power Reactor Innovative Small Module (PRISM) concept originated by the General Electric Company (GE). This concept features a compact modular system suitable for factory fabrication, and a high degree of passive and natural safety characteristics. The safety approach emphasizes accident prevention, backed up by accident mitigation. First-round safety evaluations by U.S. regulators have found that the design provides passive, natural, and other desirable features enhancing the safety of the power plant. A Preapplication Safety Evaluation Report (PSER) from the U.S. Nuclear Regulatory Commission (NRC) is anticipated in early 1993. (author)

National report of Brazil. Nuclear Safety Convention

International Nuclear Information System (INIS)

1998-09-01

This document represents the national report prepared as a fulfillment of the brazilian obligations related to the Convention on Nuclear Safety. In chapter 2 some details are given about the existing nuclear installations. Chapter 3 provides details about the legislation and regulations, including the regulatory framework and the regulatory body. Chapter 4 covers general safety considerations as described in articles 10 to 16 of the Convention. Chapter 5 addresses to the safety of the installations during siting, design, construction and operation. Chapter 6 describes planned activities to further enhance nuclear safety. Chapter 7 presents the final remarks related to the degree of compliance with the Convention obligations

Fog lamp regulation as a safety measure to reduce risk in fog conditions.

NARCIS (Netherlands)

Oppe, S.

1992-01-01

This short note summarizes the relevant aspects for a decision concerning the fog lamp use regulation. Most motorway accidents in the Netherlands took place in fog conditions in the early morning hours. The safety problem in fog conditions is a serious problem caused by bad driving behaviour. The

Official News relating to CERN Safety Rules

CERN Multimedia

HSE Unit

2015-01-01

The CERN Safety Rules listed below have been published on the official CERN Safety Rules website (see here).   Safety Regulation SR-WS Works and services: this SR-WS (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS50 “Safety Coordination on CERN Worksites”. General Safety Instruction GSI-WS-1 Safety coordination for works and services: this GSI-WS-1 (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS39 “Notice of Start of Works (AOC)” and of Safety Instruction IS50 “Safety Coordination on CERN Worksites” ​Specific Safety Instruction SSI-WS-1-1 Safety coordinator for category 1 operations: this SSI-WS-1-4 (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS50 “Safety Coordination on CERN Worksites”.​ ​ In order to limit the impact on the end-of-year technical st...

The Inspector General's report on Nuclear Safety and Radiation Protection 2017

International Nuclear Information System (INIS)

2018-01-01

This report, written for the Chairman of EDF, gives the Inspector General's assessment of nuclear safety and radiation protection within the EDF Group. The report is also intended for all those in the company who contribute in any way to nuclear safety and radiation protection through their day-to-day actions and decisions. It also aims to identify any early warning signs and recommend areas for improvement. It therefore focuses on difficulties and weaknesses rather than strengths and progress. It is based on information gathered and observations made during the year, both in France and the UK, whether from workers in the field, or during visits to plants and meetings with the main stakeholders: managers, staff representatives, members of the medical profession, chairmen of local information commissions in France and of Site stakeholder groups (British equivalent of the French Local Information Commissions) in the UK, and contractors. It also makes use of visits and comparisons with other international players on the nuclear scene, and of dialogue with WANO (World Association of Nuclear Operators) and the nuclear safety authorities. Content: 1 - the Inspector General's view of 2017; 2 - Nuclear safety results; 3 - Nuclear safety priority affirmed; 4 - Risk prevention: important to remain vigilant; 5 - Adapting people skills; 6 - Operating experience: contrasting approaches; 7 - Operations fundamentals to be reaffirmed; 8 - Importance of working closely with contract partners; 9 - Engineering support for the French fleet and new-build projects; 10 - Spares: an area for greater engagement by owners on-site; 11 - Appendices

77 FR 9659 - General Services Administration Acquisition Regulation; Information Collection; GSA Mentor...

Science.gov (United States)

2012-02-17

... Services Administration Acquisition Regulation; Information Collection; GSA Mentor-Prot[eacute]g[eacute... collection concerning the GSA Mentor-Prot[eacute]g[eacute] Program, General Service Administration...- 0286, GSA Mentor-Prot[eacute]g[eacute] Program by any of the following methods: Regulations.gov : http...

Mapping medical marijuana: state laws regulating patients, product safety, supply chains and dispensaries, 2017.

Science.gov (United States)

Klieger, Sarah B; Gutman, Abraham; Allen, Leslie; Pacula, Rosalie Liccardo; Ibrahim, Jennifer K; Burris, Scott

2017-12-01

(1) To describe open source legal data sets, created for research use, that capture the key provisions of US state medical marijuana laws. The data document how state lawmakers have regulated a medicine that remains, under federal law, a Schedule I illegal drug with no legitimate medical use. (2) To demonstrate the variability that exists across states in rules governing patient access, product safety and dispensary practice. Two legal researchers collected and coded state laws governing marijuana patients, product safety and dispensaries in effect on 1 February 2017, creating three empirical legal data sets. We used summary tables to identify the variation in specific statutory provisions specified in each state's medical marijuana law as it existed on 1 February 2017. We compared aspects of these laws to the traditional Federal approach to regulating medicine. Full data sets, codebooks and protocols are available through the Prescription Drug Abuse Policy System (http://www.pdaps.org/; Archived at http://www.webcitation.org/6qv5CZNaZ on 2 June 2017). Twenty-eight states (including the District of Columbia) have authorized medical marijuana. Twenty-seven specify qualifying diseases, which differ across states. All states protect patient privacy; only 14 protect patients against discrimination. Eighteen states have mandatory product safety testing before any sale. While the majority have package/label regulations, states have a wide range of specific requirements. Most regulate dispensaries (25 states), with considerable variation in specific provisions such as permitted product supply sources number of dispensaries per state and restricting proximity to various types of location. The federal ban in the United States on marijuana has resulted in a patchwork of regulatory strategies that are not uniformly consistent with the approach usually taken by the Federal government and whose effectiveness remains unknown. © 2017 Society for the Study of Addiction.

Harmonization of legislation and regulations to achieve food safety: US and Canada perspective.

Science.gov (United States)

Keener, Larry; Nicholson-Keener, Sophia M; Koutchma, Tatiana

2014-08-01

Trade in food and food ingredients among the nations of the world is rapidly expanding and, with this expansion, new supply chain partners, from globally disparate geographic regions, are being enrolled. Food and food ingredients are progressively sourced more from lesser developed nations. Food safety incidents in the USA and Canada show a high unfavorable correlation between illness outbreaks and imported foods. In the USA, for example, foodborne disease outbreaks caused by imported food appeared to rise in 2009 and 2010, and nearly half of the outbreaks, associated with imported food, implicated foods imported from areas which previously had not been associated with outbreaks. Projecting supply chains into new geographical regions raises serious questions about the capacity of the new supply chain partners to provide the requisite regulatory framework and sufficiently robust public health measures for ensuring the safety of the foods and foodstuffs offered for international trade. The laws, regulation and legislation among the many nations participating in the global food trade are, at best, inconsistent. These inconsistencies frequently give rise to trade disputes and cause large quantities of food to be at risk of destruction on the often dubious pretext that they are not safe. Food safety is often viewed through a political or normative lens. Often as not, this lens has been wrought absent scientific precision. Harmonization of food safety legislation around sound scientific principles, as advocated by the US Food Safety Modernization Act (FSMA), would ultimately promote trade and likely provide for incremental improvement in public health. Among the priority roles of most national governments are the advancement of commerce and trade, preservation of public health and ensuring domestic tranquility. Achieving these priorities is fundamental to creating and preserving the wealth of nations. Countries such as the Netherlands, Canada, Germany, Japan and the USA

75 FR 36288 - Amended Safety Zone and Regulated Navigation Area, Chicago Sanitary and Ship Canal, Romeoville, IL

Science.gov (United States)

2010-06-25

...The Coast Guard is revising its safety zone and Regulated Navigation Area (RNA) on the Chicago Sanitary and Ship Canal (CSSC) near Romeoville, IL. This revised temporary interim rule reduces the areas covered by the safety zone and RNA, and places additional restrictions on vessels that may transit the RNA.

Outline of safety regulations and administrations for commercial nuclear power plants in Japan

International Nuclear Information System (INIS)

Kinichi Yamamoto

1987-01-01

Outline of safety regulations and administrations for the commercial nuclear power plants in Japan is briefly described. The strict measures for safety assurance are always taken based on the principle of defense-indepth. In the actual procedures of regulatory control, the examinations and inspections shall be performed at each individual step in the stage of applications, and also in the stage of constructions. Thus, those regulatory examinations and inspections shall be performed in detail and carefully, and at the most suitable time; resulting in an effective regulatory control by the Ministry of International Trade and Industry. (author)

Encouraging Maternal Sacrifice: How Regulations Governing the Consumption of Pharmaceuticals During Pregnancy Prioritize Fetal Safety over Maternal Health and Autonomy.

Science.gov (United States)

Donley, Greer

Pregnant women are routinely faced with the stressful decision of whether to consume needed medications during their pregnancies. Because the risks associated with pharmaceutical drug consumption during pregnancy are largely unknown, pregnant women both inadvertently consume dangerous medications and avoid needed drugs. Both outcomes are harmful to pregnant women and their fetuses. This unparalleled lack of drug safety information is a result of ill-conceived, paternalistic regulations in two areas of the law: regulations governing ethical research in human subjects and regulations that dictate the required labels on drugs. The former categorizes pregnant women as "vulnerable" and thus precludes them from most medical research. The result is that ninety-one percent of drugs lack any reliable safety information for pregnant consumers. The latter currently requires all drug labels to encourage drug avoidance during pregnancy, despite ample evidence that avoiding needed medications can harm pregnant women. On June 30, 2015, new pregnancy labeling regulations took effect. Though these regulations make important improvements, they continue to treat pregnant women unlike any population, including other unique subpopulations, such as children. As a result, the new regulations do not fix the problem of over-warning pregnant women about the risks of drug consumption. This article questions the legitimacy of both regulations and suggests three reforms for how to improve access to vital safety information: (1) amend the regulations governing ethical research in human subjects to reclassify pregnant women as non-vulnerable adults; (2) create incentives to generate safety data in pregnant women by granting a period of market exclusivity for drug companies that invest in this research; and (3) make the FDA pregnancy labeling regulations consistent with the routine FDA practice of requiring the display of balanced, human data on risk.

Revised technical regulations on radiation protection and safety of 30 September 1975

International Nuclear Information System (INIS)

1975-01-01

These revised technical regulations were made in implementation of Section 4 of Decree No 7/9038 of 30 November 1974 on radiation health and safety and lay down in detail the requirements to be met in Turkey for the use of all types of radiation sources. They set out protection plans and specify the protective equipment to be used as well as the controlled areas, i.e. areas in which radiation sources are used and which must be subject to special safety measures. Finally to obtain a license, users of radiation sources must fill in forms, the models of which are provided, giving their particulars and the specifications of the intended use and activity of the sources. (NEA) [fr

THE MAIN NOVELTIES AND IMPLICATIONS OF THE NEW GENERAL DATA PROTECTION REGULATION

Directory of Open Access Journals (Sweden)

Simona Chirica

2017-12-01

Full Text Available Regulation (EU 2016/679 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation - GDPR will become applicable beginning with 25.05.2018. As a general characteristic, the regulations adopted at EU level, have direct applicability in all EU member states, and they are automatically integrated in the national legislation beginning with entry into force. Therefore, as of 25.05.2018, the GDPR provisions will be applicable and mandatory for all natural and legal persons that process personal data, including in Romania. Based on the above, GDPR brings a series of changes affecting all the involved parties (data subjects, data controllers, supervisory authorities. This article aims to present an analysis of the main novelties brought by the new regulation, and to present a comparison with the current regulation together with the practical implications of these changes in relation to the data subjects, data controllers, and supervisory authorities.

Cannabis Impairment in the Workplace: A Jurisdictional Analysis of Drug Testing Policies and Recommendations in the Context of Canadian Legalization and Regulation

OpenAIRE

Van Pelt, Kelsey

2017-01-01

Cannabis impairment can affect safety in the workplace. However, the proposed Cannabis Act does not include a framework for cannabis impairment in the workplace, as workplace health and safety in Canada is a provincial jurisdiction for most industries. In British Columbia, workplace health and safety is regulated by the Occupational Health and Safety Regulations (OHSR) under the Workers Compensation Act (WCA). Part 4 – General Conditions of the OHSR contains regulations for impairment in the ...

Safety research activities for Japanese regulations of spent fuel interim storage facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

Japan Nuclear Energy Safety Organization (JNES) carries out (a) preparation of technical documents, (b) technical evaluations of standards (prepared by academic societies), etc. and (c) other R and D activities, to support Nuclear Regulation Authority (NRA: which controls the regulations for Spent Fuel Interim Storage Facilities). In 2012 fiscal year, JNES carried out dynamic test of spent fuel to examine the integrity of spent fuel under cask drop accidents, and preparation for PWR spent fuel storage test to prove long term integrity of spent fuel and cask itself. Some of these tests will be also carried out in 2013 fiscal year and after. (author)

A fresh start of nuclear safety regulation and international perspective

International Nuclear Information System (INIS)

Oshima, Kenzo

2013-01-01

It should be explained more to the outside modestly the Fukushima nuclear accident would be a man-made complex disaster, which might be reluctant to do but not be neglected. Utmost efforts to change inward-looking attitude and reform safety culture should be done so as to prevent superficial reflection of the Fukushima nuclear accident. Since all nuclear regulatory functions ('3S': safety, security, safeguards) were integrated in Nuclear Regulation Authority (NRA), NRA and secretariat of NRA became more responsible for international response, and strengthening of organization system and human resources development would be an urgent necessity. This article described present stage of NRA focusing on international dimension including personal views. Overseas strong concern over the Fukushima nuclear accident and international communications were reviewed. The Fukushima nuclear accident started from natural disaster and enlarged as a man-made complex disaster with many human factors (mainly inaction, wilful negligence) overlapping and safety culture flawed. Examples of overseas and Japanese action plan to learn and absorb lessons from the Fukushima accident were introduced. NRA's started activities on inviting IAEA's IRRS and OPPAS as soon as ready, strengthening nuclear security measures, safeguards to prevent nuclear proliferation, bilateral cooperation and international advisors were also presented. (T. Tanaka)

Impact of Safety-Related Regulations on Codeine Use in Children: A Quasi-Experimental Study Using Taiwan's National Health Insurance Research Database.

Science.gov (United States)

Lin, Chih-Wan; Wang, Ching-Huan; Huang, Wei-I; Ke, Wei-Ming; Chao, Pi-Hui; Chen, Wen-Wen; Hsiao, Fei-Yuan

2017-07-01

Safety concerns regarding potential life-threatening adverse events associated with codeine have resulted in policy decisions to restrict its use in pediatrics. However, whether these drug safety communications have had an immediate and strong impact on codeine use remains in question. We aimed to investigate the impact of the two implemented safety-related regulations (label changes and reimbursement regulations) on the use of codeine for upper respiratory infection (URI) or cough. A quasi-experimental study was performed using Taiwan's National Health Insurance Research Database. Quarterly data of codeine prescription rates for URI/cough visits were reported, and an interrupted time series design was used to assess the impact of the safety regulations on the uses of codeine among children with URI/cough visits. Multivariable logistic regression models were used to explore patient and provider characteristics associated with the use of codeine. The safety-related regulations were associated with a significant reduction in codeine prescription rates of -4.24% (95% confidence interval [CI] -4.78 to -3.70), and the relative reduction compared with predicted rates based on preregulation projections was 60.4, 56.6, and 53.2% in the first, second, and third year after the regulations began, respectively. In the postregulation period, physicians specializing in otolaryngology (odds ratio [OR] 1.47, 95% CI 1.45-1.49), practicing in district hospitals (OR 6.84, 95% CI 5.82-8.04) or clinics (OR 6.50, 95% CI 5.54-7.62), and practicing in the least urbanized areas (OR 1.60, 95% CI 1.55-1.64) were more likely to prescribe codeine to children than their counterparts. Our study provides a successful example of how to effectively reduce the codeine prescriptions in children in the 'real-world' settings, and highlights areas where future effort could be made to improve the safety use of codeine. Future research is warranted to explore whether there was a simultaneous decrease in

Report to the Attorney General on Body Armor Safety Initiative Testing and Activities

National Research Council Canada - National Science Library

2005-01-01

On November 17, 2003, Attorney General John Ashcroft announced the U.S. Department of Justice's Body Armor Safety Initiative in response to concerns from the law enforcement community regarding the effectiveness of body armor in use...

Use of risk information to safety regulation. Reprocessing facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

A procedure of probabilistic risk assessment (PRA) for a reprocessing facility has been under the development aiming to utilize risk information for safety regulations in this project. Activities in the fiscal year 2012 are summarized in the paper. A major activity is a fundamental study on a concept of serious accidents, requirements of serious accident management, and a policy of utilizing risk information for fabrication and reprocessing facilities. Other than the activity a study on release and transport of aerial radioactive materials at a serious accident in a reprocessing facility has been conducted. The outline and results are provided in the chapter 1 and 2 respectively. (author)

Then years of nuclear safety in France: administrative action

International Nuclear Information System (INIS)

Torquat, C. de; Levy, M.

1983-01-01

General principles of administrative action concerning nuclear safety in France are recalled. The three principal and complementary aspects of the action are described: technical regulations; administrative procedures; inspection of plant being constructed or already in operation [fr

Benefit using reasonable regulations in USA, how to skill up on professional engineers, apply international code, standard, and regulation

International Nuclear Information System (INIS)

Turner, S.L.; Morokuzu, Muneo; Amano, Osamu

2005-01-01

The reasonable regulations in USA consist of a graduated approach and a risk informed approach (RIA). RIA rationalizes the regulations on the basis of data of operations etc. PSA (Probabilistic Safety Assessment), a general method of RIA, is explained in detail. The benefits of nuclear power plant using RIA are increase of the rate of operation, visualization of risk, application of design standard and design, cost down of nuclear fuel cycle, waste, production and operation, and safety. RIA is supported by the field data, code, standard, regulation and professional engineers. The effects of introduction of RIA are explained. In order to introduce RIA in Japan, all the parties concerned such as the regulation authorities, the electric power industries, makers, universities, have to understand it and work together. A part of scientific society is stated. (S.Y.)

CANDU reactors, their regulation in Canada, and the identification of relevant NRC safety issues

International Nuclear Information System (INIS)

Charak, I.; Kier, P.H.

1995-04-01

Atomic Energy of Canada, Limited (AECL) and its subsidiary in the US, are considering submitting the CANDU 3 design for standard design certification under 10 CFR Part 52. CANDU reactors are pressurized heavy water power reactors. They have some substantially different safety responses and safety systems than the LWRs that the commercial power reactor licensing regulations of the US Nuclear Regulatory Commission (NRC) have been developed to deal with. In this report, the authors discuss the basic design characteristics of CANDU reactors, specifically of the CANDU 3 where possible, and some safety-related consequences of these characteristics. The authors also discuss the Canadian regulatory provisions, and the CANDU safety systems that have evolved to satisfy the Canadian regulatory requirements as of December 1992. Finally, the authors identify NRC regulations, mainly in 10 CFR Parts 50 and 100, with issues for CANDU 3 reactor designs. In all, eleven such regulatory issues are identified. They are: (1) the ATWS rule (section 50.62); (2) station blackout (section 50.63); (3) conformance with Standard Review Plan (SRP); (4) appropriateness of the source term (section 50.34(f) and section 100.11); (5) applicability of reactor coolant pressure boundary (RCPB) requirements (section 50.55a, etc); (6) ECCS acceptance criteria (section 50.46)(b); (7) combustible gas control (section 50.44, etc); (8) power coefficient of reactivity (GDC 11); (9) seismic design (Part 100); (10) environmental impacts of the fuel cycle (section 51.51); and (11) (standards section 50.55a)

Model Regulations for the Use of Radiation Sources and for the Management of the Associated Radioactive Waste. Supplement to IAEA Safety Standards Series No. GS-G-1.5

International Nuclear Information System (INIS)

2015-01-01

IAEA Safety Standards Series No. GSR Part 1, Governmental, Legal and Regulatory Framework for Safety, requires that governments establish laws and statutes to make provisions for an effective governmental, legal and regulatory framework for safety. The framework for safety includes the establishment of a regulatory body. The regulatory body has the authority and responsibility for promulgating regulations, and for preparing their implementation. This publication provides advice on an appropriate set of regulations covering all aspects of the use of radiation sources and the safe management of the associated radioactive waste. The regulations provide the framework for the regulatory requirements and conditions to be incorporated into individual authorizations for the use of radiation sources in industry, medical facilities, research and education and agriculture. The regulations also establish criteria to be used for assessing compliance. This publication allows States to appraise the adequacy of their existing regulations and regulatory guides, and can be used as a reference for those States developing regulations for the first time. The regulations set out in this publication will need to be adapted to take account of local conditions, technical resources and the scale of facilities and activities in the State. The set of regulations in this publication is based on the requirements established in the IAEA safety standards series, in particular in IAEA Safety Standards Series No. GSR Part 3 (Interim), Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards, in IAEA Safety Standards Series No. GSR Part 5, Predisposal Management of Radioactive Waste, and in IAEA Safety Standards Series No. SSR-5, Disposal of Radioactive Waste. They are also derived from the Code of Conduct of the Safety and Security of Radiation Sources and the Guidance on the Import and Export of Radioactive Sources. This publication allows States to appraise the

Model Regulations for the Use of Radiation Sources and for the Management of the Associated Radioactive Waste. Supplement to IAEA Safety Standards Series No. GS-G-1.5

International Nuclear Information System (INIS)

2013-12-01

IAEA Safety Standards Series No. GSR Part 1, Governmental, Legal and Regulatory Framework for Safety, requires that governments establish laws and statutes to make provisions for an effective governmental, legal and regulatory framework for safety. The framework for safety includes the establishment of a regulatory body. The regulatory body has the authority and responsibility for promulgating regulations, and for preparing their implementation. This publication provides advice on an appropriate set of regulations covering all aspects of the use of radiation sources and the safe management of the associated radioactive waste. The regulations provide the framework for the regulatory requirements and conditions to be incorporated into individual authorizations for the use of radiation sources in industry, medical facilities, research and education and agriculture. The regulations also establish criteria to be used for assessing compliance. This publication allows States to appraise the adequacy of their existing regulations and regulatory guides, and can be used as a reference for those States developing regulations for the first time. The regulations set out in this publication will need to be adapted to take account of local conditions, technical resources and the scale of facilities and activities in the State. The set of regulations in this publication is based on the requirements established in the IAEA safety standards series, in particular in IAEA Safety Standards Series No. GSR Part 3 (Interim), Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards, in IAEA Safety Standards Series No. GSR Part 5, Predisposal Management of Radioactive Waste, and in IAEA Safety Standards Series No. SSR-5, Disposal of Radioactive Waste. They are also derived from the Code of Conduct of the Safety and Security of Radiation Sources and the Guidance on the Import and Export of Radioactive Sources. This publication allows States to appraise the

Deficits in general emotion regulation skills-Evidence of a transdiagnostic factor.

Science.gov (United States)

Lukas, Christian Aljoscha; Ebert, David Daniel; Fuentes, Hugo Trevisi; Caspar, Franz; Berking, Matthias

2017-12-15

Deficits in emotion regulation (ER) skills are discussed as a transdiagnostic factor contributing to the development and maintenance of various mental disorders. However, systematic comparisons of a broad range of ER skills across diagnostic groups that are based on comparable definitions and measures of ER are still rare. Therefore, we conducted two studies assessing a broad range of ER skills with the Emotion Regulation Skills Questionnaire in individuals meeting criteria for mental disorders (N 1  = 1448; N 2  = 137) and in a general population sample (N = 214). Consistent across the two studies, participants in the clinical samples reported lower general and lower specific ER skills than participants in the general population sample. Also consistent across the two studies, diagnostic subgroups of the clinical samples differed significantly with regard to general and specific ER skills. The studies provide evidence that deficits in ER are associated with various forms of psychopathology. However, mental disorders seem to differ with regard to how strongly they are linked to ER skills. © 2017 Wiley Periodicals, Inc.

Risk regulation in environment, health and safety : Decision in the face of uncertainty

Energy Technology Data Exchange (ETDEWEB)

Ettlinger, L A [The Oxford Group, Baltimore, MD (United States)

1999-12-01

unlikely to be resolved solely by administrative reform, reliance on experts, or risk education because, generally, these reforms are focused strictly on narrowing the risk uncertainty. From economic principles, however, we recognize that the value of efforts to minimize this risk uncertainty (or to maximize the technical and scientific information about risks) is subject to 'diminishing marginal utility'. Thus, these efforts ultimately can be expected to become unpopular with both citizens and elected officials. We expect, therefore, that the outcome of the risk regulation debate, and ultimately environment, health and safety policy decisions, will primarily be determined by the values of the proponents and opponents as to the relative ranking of efficiency and equity. Most likely, the best means available for reforming risk regulation and making it more coherent and to avoid some of the costly mistakes of the past is to: 1. increase the resources available for identifying risks and effective responses to them, 2. build in mechanisms for informing the public that policy decisions using these regulations are value laden, and 3. publicize both the process and the outcomes of risk regulations and policy decisions.

Risk regulation in environment, health and safety : Decision in the face of uncertainty

Energy Technology Data Exchange (ETDEWEB)

Ettlinger, L.A. [The Oxford Group, Baltimore, MD (United States)

1999-12-01

relationship are unlikely to be resolved solely by administrative reform, reliance on experts, or risk education because, generally, these reforms are focused strictly on narrowing the risk uncertainty. From economic principles, however, we recognize that the value of efforts to minimize this risk uncertainty (or to maximize the technical and scientific information about risks) is subject to 'diminishing marginal utility'. Thus, these efforts ultimately can be expected to become unpopular with both citizens and elected officials. We expect, therefore, that the outcome of the risk regulation debate, and ultimately environment, health and safety policy decisions, will primarily be determined by the values of the proponents and opponents as to the relative ranking of efficiency and equity. Most likely, the best means available for reforming risk regulation and making it more coherent and to avoid some of the costly mistakes of the past is to: 1. increase the resources available for identifying risks and effective responses to them, 2. build in mechanisms for informing the public that policy decisions using these regulations are value laden, and 3. publicize both the process and the outcomes of risk regulations and policy decisions.

Risk regulation in environment, health and safety : Decision in the face of uncertainty

International Nuclear Information System (INIS)

Ettlinger, L.A.

1999-01-01

unlikely to be resolved solely by administrative reform, reliance on experts, or risk education because, generally, these reforms are focused strictly on narrowing the risk uncertainty. From economic principles, however, we recognize that the value of efforts to minimize this risk uncertainty (or to maximize the technical and scientific information about risks) is subject to 'diminishing marginal utility'. Thus, these efforts ultimately can be expected to become unpopular with both citizens and elected officials. We expect, therefore, that the outcome of the risk regulation debate, and ultimately environment, health and safety policy decisions, will primarily be determined by the values of the proponents and opponents as to the relative ranking of efficiency and equity. Most likely, the best means available for reforming risk regulation and making it more coherent and to avoid some of the costly mistakes of the past is to: 1. increase the resources available for identifying risks and effective responses to them, 2. build in mechanisms for informing the public that policy decisions using these regulations are value laden, and 3. publicize both the process and the outcomes of risk regulations and policy decisions

EDF - The Inspector General's report on Nuclear Safety and Radiation Protection 2009

International Nuclear Information System (INIS)

2010-01-01

After a first chapter in which the Inspector General states his own vision of facts and results regarding nuclear safety and radiation protection for 2009, the relationship with the ASN (Nuclear safety authority), and also gives his own impression on the whole EDF nuclear system, the next chapters more particularly address the following topics: safety management, radiation protection of interveners, abilities and education for new challenges, the exploitation quality, the implementation of new regulatory arrangements, the extension of exploitation duration, the EPR project, the doctors as actors of safety management, service providing or subcontracting companies and fleet performance, prevention and struggle against fire, the activity of British Energy which is part of the EDF group, events which occurred within the EDF group (exposure of an intervener, incidents involving fuel components, biases in work monitoring, a fire on a turbo generator, an incident in Dungeness), lessons drawn from other industrial events (in a Russian hydroelectric station and in a refinery in Texas), and visits in China and in Japan

Development and application of nuclear safety goals in Japan. Lessons learnt from the case of 2003 draft safety goals

International Nuclear Information System (INIS)

Sugawara, Shin-etsu; Inamura, Tomoaki

2016-01-01

The Nuclear Safety Commission in Japan offered a detailed draft of nuclear safety goals to the public in 2003, though its position was ambiguous in nuclear safety regulation. This report shows the circumstances behind the development and application of 2003 draft safety goals based on our interviews with the experts who had been involved in making the draft. According to our interviews, they had intention to utilize safety goals for improving risk management of regulatory authority and nuclear energy industry, such as ameliorating deterministic regulations, accumulating experience of risk assessment and management, promoting related research, and communicating risks with general public. In practice, however, safety goals had functioned as a tool for emphasizing an assertion that 'nuclear power plants had already been safe enough'. We identified the following four major impediments to utilizing safety goals; 1) lack of sharing overall recognition of the importance of establishing safety goals among nuclear community, 2) excessive emphasis of internal event risks which leads to an inferior priority to tackle with the issue of external events risks, 3) adverse effect of 'tunnel-visioned incrementalism', that is, nuclear energy industrial entities are attracted their foci too much on what they have been told to do by regulators or local governments, and, 4) negative attitude to disclose the outcomes of risk assessment for fear of societal reactions. To encourage upcoming safety goals and risk management, this report provides the following points for overcoming these problems; 1) sharing insights on the reasons why nuclear community set up safety goals, 2) introducing the concept of adaptive risk management for maintaining questioning attitude, 3) conducting a periodic review of goal attainment level and also safety goals themselves from the eyes of a detached observer, and, 4) rebuilding relationship with society beginning with arguments with local stakeholders over

The need for a public information program to promote understanding of the validity of the safety of IAEA transport regulations for shipment of radioactive material

International Nuclear Information System (INIS)

Kubo, M.

2004-01-01

It is important to convey basic knowledge that demonstrates to the general public and public officials that transport of radioactive materials is safe. Data, analysis, and testing for certification in member states of the IAEA as well as experience with packages involved in accidents demonstrate the margin of safety when radioactive material material is transported. In addition, the experience of TranSAS activity has shown it to be an effective and transparent means to the public people for Member States to demonstrate their commitment to the safe transport of RAM. Therefore, in the future, the IAEA must continue and expand its public efforts to make the public aware of the very high certainty of safe transport that is the consequence of following the regulations. I would like to ask IAEA to have the transportation specialist groups designated by each Member State. These transportation specialist groups, working with the IAEA transport regulations in each country, should have as a central activity an information program that conveys the margin of safety inherent in the IAEA transport regulations. Finally I would like to ask IAEA to produce a program relating to public perception of RAM transport for the public throughout the world. And also I would like to ask IAEA to send the transportation specialist groups to Member States and many concerned countries to explain and demonstrate the adequacy of the IAEA Regulations

The need for a public information program to promote understanding of the validity of the safety of IAEA transport regulations for shipment of radioactive material

Energy Technology Data Exchange (ETDEWEB)

Kubo, M. [Japan Nuclear Cycle Development Inst., Ibaraki (Japan)

2004-07-01

It is important to convey basic knowledge that demonstrates to the general public and public officials that transport of radioactive materials is safe. Data, analysis, and testing for certification in member states of the IAEA as well as experience with packages involved in accidents demonstrate the margin of safety when radioactive material material is transported. In addition, the experience of TranSAS activity has shown it to be an effective and transparent means to the public people for Member States to demonstrate their commitment to the safe transport of RAM. Therefore, in the future, the IAEA must continue and expand its public efforts to make the public aware of the very high certainty of safe transport that is the consequence of following the regulations. I would like to ask IAEA to have the transportation specialist groups designated by each Member State. These transportation specialist groups, working with the IAEA transport regulations in each country, should have as a central activity an information program that conveys the margin of safety inherent in the IAEA transport regulations. Finally I would like to ask IAEA to produce a program relating to public perception of RAM transport for the public throughout the world. And also I would like to ask IAEA to send the transportation specialist groups to Member States and many concerned countries to explain and demonstrate the adequacy of the IAEA Regulations.

Influence of safety vlave pressure on gelled electrolyte valve-regulated lead/acid batteries under deep cycling applications

International Nuclear Information System (INIS)

Oh, Sang Hyub; Kim, Myung Soo; Lee, Jin Bok; Lee, Heung Lark

2002-01-01

Cycle life tests have been carried out to evaluate the influence of safety valve pressure on vlave regulated lead/acid batteries under deep cycling applications. Batteries were cycled at 5 hour rates at 100 % DOD, and safety valve pressure was set to 1.08 and 2.00 bar, respectively. The batteries lost 248.3 g of water for each case after about 1,200 cycles, but the cyclic performances of the batteries were comparable. Most of the gas of the battery during discharging was hydrogen, and the oxygen concentration increased to 18 % after 3 hours of charging. The micro structure of the positive active materials was completely changed and the corrosion layer of the positive grid was less than 50 μm, regardless of the pressure of the safety valve after cycle life tests. The cause of discharge capacity decrease was found to water loss and the shedding of the positive active materials. The pressure of safety valve does not give little effect to the cyclic performance and the failure modes of the gelled electrolyte valve-regulated lead acid batteries

Safety criteria for siting a nuclear power plant

International Nuclear Information System (INIS)

2001-01-01

The guide sets forth requirements for safety of the population and the environment in nuclear power plant siting. It also sets out the general basis for procedures employed by other competent authorities when they issue regulations or grant licences. On request STUK (Radiation and Nuclear Safety Authority of Finland) issues case-specific statements about matters relating to planning and about other matters relating to land use in the environment of nuclear power plants

Proposals for the Radioactive Substances (Basic Safety Standards) (England and Wales) Regulations 2000 and the Radioactive Substances (Basic Safety Standards) (England and Wales) Direction 2000. Consultative document

International Nuclear Information System (INIS)

2000-01-01

This document contains proposals for changes to the Radioactive Substances Act 1993 (RSA 93) and proposals for a Direction to be given to the Environment Agency in order to implement aspects of the European Directive 96/29/Euratom concerned with the control of radioactive waste. The Directive lays down basic safety standards for the protection of the health of workers and the general public against the dangers arising from ionising radiation. With the Government pledged to making government more accessible and responsive, an important feature of this approach is effective consultation with all interested organisations. This leads to more realistic and robust proposals, which is particularly important when dealing with proposed legislation. In March this year, the Government published a consultation paper 'The Radioactive Substances Act 1993: Implementing the Revised Basic Safety Standards Directive Euratom 96/29.' This sought comments on the basic principles for change - including the setting of levels of radioactivity below which radioactive material should be considered outside the framework of regulatory control. This document forms the second stage of the consultation process with the aim of gathering views on the proposed legal instruments to implement the Directive. This document: explains the background to the proposed regulations (paragraphs 8-13); summarises the results of the consultation on principles (paragraphs 14-24); describes the proposed changes (paragraphs 25-36); includes draft Regulations (paragraphs 27-29); includes a draft Direction to the Environment Agency (paragraphs 30-36); describes the next steps (paragraphs 37-39); includes a draft Regulatory Impact Assessment (paragraphs 40-41). In general, the devolved administrations in Scotland, Wales and Northern Ireland have assumed responsibility for environmental issues and hence management of radioactive waste policies and legislation affecting their respective countries. However, this

International laser-safety regulations: a status update

Science.gov (United States)

Weiner, Robert M.

1990-07-01

There is an increase in international laser safety requirements as part of the emphasis on world-wide standardization of products and regulations. In particular the documents which will evolve from the 1992 consolidation efforts of the European Community (EC) will impact both laser manufacturers and users. This paper provides a discussion of the current status of the various laser radiation standards. NORTH AMERICAN REQUIREMENTS United States Requirements on manufacturers from the Food and Drug Administration (FDA) have been in effect since 1975. The Center for Devices and Radiological Health (CDRH) within that agency ensures that these mandatory requirements [1] are satisfied. The CDRH regulations include the division of products into classes depending on their potential for hazard criteria for power measurement and requirements for product features labels and manuals and records and reports. Manufacturers must test products and certify that they comply with the CDRH requirements. User requirements are found in a standard published by the American National Standards Institute (ANSI) and in requirements from several individual states. Specific ANSI standards have also been published for fiber communications systems [34] and for lasers in medical applications [35]. Please note that the Appendix includes additional information on the standards discussed in this paper including sources for obtaining the documents. Canada In the past Canada has had requirements for two specified product categories (bar code scanners and educational lasers) [26 These will be replaced

Redefining interrelationship between nuclear safety, nuclear security and safeguards

International Nuclear Information System (INIS)

Irie, Kazutomo

2012-01-01

Since the beginning of this century, the so-called 3Ss (Nuclear Safety, Nuclear Security and Safeguards) have become major regulatory areas for peaceful uses of nuclear energy. In order to rationalize the allocation of regulatory resources, interrelationship of the 3Ss should be investigated. From the viewpoint of the number of the parties concerned in regulation, nuclear security is peculiar with having “aggressors” as the third party. From the viewpoint of final goal of regulation, nuclear security in general and safeguards share the goal of preventing non-peaceful uses of nuclear energy, though the goal of anti-sabotage within nuclear security is rather similar to nuclear safety. As often recognized, safeguards are representative of various policy tools for nuclear non-proliferation. Strictly speaking, it is not safeguards as a policy tool but nuclear non-proliferation as a policy purpose that should be parallel to other policy purposes (nuclear safety and nuclear security). That suggests “SSN” which stands for Safety, Security and Non-proliferation is a better abbreviation rather than 3Ss. Safeguards as a policy tool should be enumerated along with nuclear safety regulation, nuclear security measures and trade controls on nuclear-related items. Trade controls have been playing an important role for nuclear non-proliferation. These policy tools can be called “SSST” in which Trade controls are also emphasized along with Safety regulation, Security measures and Safeguards. (author)

Implementation of General Data Protection Regulation (GDPR) in Enterprises

DEFF Research Database (Denmark)

Khajuria, Samant; Sørensen, Lene Tolstrup; Skouby, Knud Erik

2017-01-01

It is impossible to keep the data secure and private when one can’t keep track of what they have, where it is and what its value is. After twenty years, Data protection Directive 95/46/EC (DPD) is finally phased out and replaced by General Data Protection Regulation (GDPR). This is a step towards...

Resolution No. 6/04 Regulations for the recognition of the competence of services for radiation safety

International Nuclear Information System (INIS)