Concerns related to Safety Management of Engineered Nanomaterials in research environment

International Nuclear Information System (INIS)

Groso, A; Meyer, Th

2013-01-01

Since the rise of occupational safety and health research on nanomaterials a lot of progress has been made in generating health effects and exposure data. However, when detailed quantitative risk analysis is in question, more research is needed, especially quantitative measures of workers exposure and standards to categorize toxicity/hazardousness data. In the absence of dose-response relationships and quantitative exposure measurements, control banding (CB) has been widely adopted by OHS community as a pragmatic tool in implementing a risk management strategy based on a precautionary approach. Being in charge of health and safety in a Swiss university, where nanomaterials are largely used and produced, we are also faced with the challenge related to nanomaterials' occupational safety. In this work, we discuss the field application of an in-house risk management methodology similar to CB as well as some other methodologies. The challenges and issues related to the process will be discussed. Since exact data on nanomaterials hazardousness are missing for most of the situations, we deduce that the outcome of the analysis for a particular process is essentially the same with a simple methodology that determines only exposure potential and the one taking into account the hazardousness of ENPs. It is evident that when reliable data on hazardousness factors (as surface chemistry, solubility, carcinogenicity, toxicity etc.) will be available, more differentiation will be possible in determining the risk for different materials. On the protective measures side, all CB methodologies are inclined to overprotection side, only that some of them suggest comprehensive protective/preventive measures and others remain with basic advices. The implementation and control of protective measures in research environment will also be discussed.

Concerns related to Safety Management of Engineered Nanomaterials in research environment

Science.gov (United States)

Groso, A.; Meyer, Th

2013-04-01

Since the rise of occupational safety and health research on nanomaterials a lot of progress has been made in generating health effects and exposure data. However, when detailed quantitative risk analysis is in question, more research is needed, especially quantitative measures of workers exposure and standards to categorize toxicity/hazardousness data. In the absence of dose-response relationships and quantitative exposure measurements, control banding (CB) has been widely adopted by OHS community as a pragmatic tool in implementing a risk management strategy based on a precautionary approach. Being in charge of health and safety in a Swiss university, where nanomaterials are largely used and produced, we are also faced with the challenge related to nanomaterials' occupational safety. In this work, we discuss the field application of an in-house risk management methodology similar to CB as well as some other methodologies. The challenges and issues related to the process will be discussed. Since exact data on nanomaterials hazardousness are missing for most of the situations, we deduce that the outcome of the analysis for a particular process is essentially the same with a simple methodology that determines only exposure potential and the one taking into account the hazardousness of ENPs. It is evident that when reliable data on hazardousness factors (as surface chemistry, solubility, carcinogenicity, toxicity etc.) will be available, more differentiation will be possible in determining the risk for different materials. On the protective measures side, all CB methodologies are inclined to overprotection side, only that some of them suggest comprehensive protective/preventive measures and others remain with basic advices. The implementation and control of protective measures in research environment will also be discussed.

Questionnaire responses concerning safety issues in MR examination

International Nuclear Information System (INIS)

Yamaguchi-Sekino, Sachiko; Nakai, Toshiharu; Muranaka, Hiroyuki

2011-01-01

Recently, the rising numbers of medical implants and scanners with higher static magnetic field have increased safety concerns for magnetic resonance (MR) examination. To determine future safety focus, we distributed anonymous questionnaires to 3250 members of the Japanese Society for Magnetic Resonance in Medicine (JSMRM) and received 978 responses. Safety issues on the questionnaire concentrated on the handling of patients with implants (Q7-18, appendix), acoustic trauma due to scanning (Q19-21, appendix), and MR compatibility within the scanner room (Q22-25, appendix). Ninety-three percent of respondents indicated they had encountered cases with implants or medical materials of unknown MR compatibility; 21.7% reported heating problems and 15.0%, nerve stimulation problems, in patients with implants during MR examination. Although 88.7% of respondents recognized the term ''MR compatibility'', 68.2% indicated limited detailed understanding of the term. Eleven percent had had cases with suspected acoustic injury from MR scanner noise. Scanner noise levels were not clarified in any way in 37.4% cases, but 69.5% applied ear protection to patients. Labeling of ''MR compatibility'' of equipment brought into the MR scanner room was reported by 71.9%. More than 50% experienced MR compatibility issues related to equipment brought into the MR scanner room. With regard to safety issues on metallic objects which are implanted in MR workers, 88.1% indicated they would continue current operations even the implant is inside the body. Respondents identified lectures and seminars by professional societies, safety training by manufacturers, and information from the Internet and literature as the 3 main sources for up-dating safety information for MR examination. (author)

International antiterrorist conventions concerning the safety of air transport

Directory of Open Access Journals (Sweden)

Jacek BARCIK

2008-01-01

Full Text Available In this article the international law regulations are presented concerning the civilian safety of the air transport. The history concerning air terrorism and international antiterrorist conventions was described in detail, involving The Chicago Convention, The Tokyo Convention, The Hague Convention and Montreal Convention.

Occupational Safety and Health Concerns in Logging: A Cross-Sectional Assessment in Virginia

Directory of Open Access Journals (Sweden)

Sunwook Kim

2017-11-01

Full Text Available Increased logging mechanization has helped improve logging safety and health, yet related safety risks and concerns are not well understood. A cross-sectional study was completed among Virginia loggers. Participants (n = 122 completed a self-administered questionnaire focusing on aspects of safety and health related to logging equipment. Respondents were at a high risk of workplace injuries, with reported career and 12-month injury prevalences of 51% and 14%, respectively. Further, nearly all (98% respondents reported experiencing musculoskeletal symptoms. Over half (57.4% of respondents reported symptoms related to diesel exhaust exposure in their career. Few (15.6%, however, perceived their jobs to be dangerous. Based on the opinions and suggestions of respondents, three priority areas were identified for interventions: struck-by/against hazards, situational awareness (SA during logging operations, and visibility hazards. To address these hazards, and to have a broader and more substantial positive impact on safety and health, we discuss the need for proactive approaches such as incorporating proximity technologies in a logging machine or personal equipment, and enhancing logging machine design to enhance safety, ergonomics, and SA.

Pre-Exposure Prophylaxis for HIV Prevention : Safety Concerns

NARCIS (Netherlands)

Tetteh, Raymond A; Yankey, Barbara A; Nartey, Edmund T; Lartey, Margaret; Leufkens, Hubert G M; Dodoo, Alexander N O

Available evidence supports the efficacy of pre-exposure prophylaxis (PrEP) in decreasing the incidence of human immunodeficiency virus (HIV) infection among high-risk individuals, especially when used in combination with other behavioural preventive methods. Safety concerns about PrEP present

Food safety concerns of fast food consumers in urban Ghana.

Science.gov (United States)

Omari, Rose; Frempong, Godfred

2016-03-01

In Ghana, out-of-home ready-to-eat foods including fast food generally have been associated with food safety problems. Notwithstanding, fast food production and consumption are increasing in Ghana and therefore this study sought to determine the food safety issues of importance to consumers and the extent to which they worry about them. First, through three focus group discussions on consumers' personal opinions about food safety issues, some emergent themes were obtained, which were used to construct an open-ended questionnaire administered face-to-face to 425 respondents systematically sampled from 20 fast food restaurants in Accra. Findings showed that most fast food consumers were concerned about food hazards such as pesticide residue in vegetables, excessive use of artificial flavour enhancers and colouring substances, bacterial contamination, migrated harmful substances from plastic packages, and general unhygienic conditions under which food is prepared and sold. Consumers also raised concerns about foodborne diseases such as cholera, typhoid, food poisoning, diarrhoea, bird flu and swine flu. The logistic regression model showed that being male increased the likelihood of worrying about general food safety issues and excessive use of flavour enhancers than in females while being youthful increased the likelihood of being worried about typhoid fever than in older consumers. These findings imply that consumers in urban Ghana are aware and concerned about current trends of food safety and foodborne disease challenges in the country. Therefore, efforts targeted at improving food safety and reducing incidences of foodborne diseases should not only focus on public awareness creation but should also design more comprehensive programmes to ensure the making of food safety rules and guidelines and enforcing compliance to facilitate availability and consumers' choice of safe foods. Copyright © 2015 Elsevier Ltd. All rights reserved.

'Speaking up' about patient safety concerns and unprofessional behaviour among residents: validation of two scales.

Science.gov (United States)

Martinez, William; Etchegaray, Jason M; Thomas, Eric J; Hickson, Gerald B; Lehmann, Lisa Soleymani; Schleyer, Anneliese M; Best, Jennifer A; Shelburne, Julia T; May, Natalie B; Bell, Sigall K

2015-11-01

To develop and test the psychometric properties of two new survey scales aiming to measure the extent to which the clinical environment supports speaking up about (a) patient safety concerns and (b) unprofessional behaviour. Residents from six large US academic medical centres completed an anonymous, electronic survey containing questions regarding safety culture and speaking up about safety and professionalism concerns. Confirmatory factor analysis supported two separate, one-factor speaking up climates (SUCs) among residents; one focused on patient safety concerns (SUC-Safe scale) and the other focused on unprofessional behaviour (SUC-Prof scale). Both scales had good internal consistency (Cronbach's α>0.70) and were unique from validated safety and teamwork climate measures (rspeaking up behaviour about safety and professionalism concerns (r=0.21, pspeaking up behaviour among residents. These two scales may fill an existing gap in residency and safety culture assessments by measuring the openness of communication about safety and professionalism concerns, two important aspects of safety culture that are under-represented in existing metrics. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Food colors: Existing and emerging food safety concerns.

Science.gov (United States)

Oplatowska-Stachowiak, Michalina; Elliott, Christopher T

2017-02-11

Food colors are added to different types of commodities to increase their visual attractiveness or to compensate for natural color variations. The use of these additives is strictly regulated in the European Union, the United States, and many other countries worldwide. There is a growing concern about the safety of some commonly used legal food colorants and there is a trend to replace the synthetic forms with natural products. Additionally, a number of dyes with known or suspected genotoxic or carcinogenic properties have been shown to be added illegally to foods. Robust monitoring programs based on reliable detection methods are required to assure the food is free from harmful colors. The aim of this review is to present an up to date status of the various concerns arising from use of color additives in food. The most important food safety concerns in the field of food colors are lack of uniform regulation concerning legal food colors worldwide, possible link of artificial colors to hyperactive behavior, replacement of synthetic colors with natural ones, and the presence of harmful illegal dyes-both known but also new, emerging ones in food. The legal status of food color additives in the EU, United States, and worldwide is summarized. The reported negative health effects of both legal and illegal colors are presented. The European Rapid Alert System for Food and Feed notifications and US import alerts concerning food colors are analyzed and trends in fraudulent use of color additives identified. The detection methods for synthetic colors are also reviewed.

Guide to the declaration procedure and coding system for criteria concerning significant events related to safety, radiation protection or the environment, applicable to basic nuclear installations and the transport of radioactive materials

International Nuclear Information System (INIS)

Lacoste, Andre-Claude

2005-01-01

This guide notably contains various forms associated with the declaration of significant events, and explanations to fill them in: significant event declaration form for a basic nuclear installation, significant event declaration form for radioactive material transport, significant event report for a basic nuclear installation, significant event report for radioactive material transport, declaration criteria for significant events related to the safety of non-PWR basic nuclear installations, declaration criteria for significant events related to PWR safety, significant events declared further to events resulting in group 1 unavailability and non-compliance with technical operating specifications, declaration criteria for significant events concerning radiation protection for basic nuclear installations, declaration criteria for significant events concerning environmental protection, applicable to basic nuclear installations, and declaration criteria for significant events concerning radioactive material transport

Application of the threshold of toxicological concern (TTC) to the safety evaluation of cosmetic ingredients

NARCIS (Netherlands)

Kroes, R.; Renwick, A.G.; Feron, V.; Galli, C.L.; Gibney, M.; Greim, H.; Guy, R.H.; Lhuguenot, J.C.; Sandt, J.J.M. van de

2007-01-01

The threshold of toxicological concern (TTC) has been used for the safety assessment of packaging migrants and flavouring agents that occur in food. The approach compares the estimated oral intake with a TTC value derived from chronic oral toxicity data for structurally-related compounds.

Driving and dementia: Efficient approach to driving safety concerns in family practice.

Science.gov (United States)

Lee, Linda; Molnar, Frank

2017-01-01

To provide primary care physicians with an approach to driving safety concerns when older persons present with memory difficulties. The approach is based on an accredited memory clinic training program developed by the Centre for Family Medicine Primary Care Collaborative Memory Clinic. One of the most challenging aspects of dementia care is the assessment of driving safety. Drivers with dementia are at higher risk of motor vehicle collisions, yet many drivers with mild dementia might be safely able to continue driving for several years. Because safe driving is dependent on multiple cognitive and functional skills, clinicians should carefully consider many factors when determining if cognitive concerns affect driving safety. Specific findings on corroborated history and office-based cognitive testing might aid in the physician's decisions to refer for comprehensive on-road driving evaluation and whether to notify transportation authorities in accordance with provincial reporting requirements. Sensitive communication and a person-centred approach are essential. Primary care physicians must consider many factors when determining if cognitive concerns might affect driving safety in older drivers. Copyright© the College of Family Physicians of Canada.

Psychometrics of the AAN Caregiver Driving Safety Questionnaire and contributors to caregiver concern about driving safety in older adults.

Science.gov (United States)

Carvalho, Janessa O; Springate, Beth; Bernier, Rachel A; Davis, Jennifer

2018-03-01

ABSTRACTBackground:The American Academy of Neurology (AAN) updated their practice parameters in the evaluation of driving risk in dementia and developed a Caregiver Driving Safety Questionnaire, detailed in their original manuscript (Iverson Gronseth, Reger, Classen, Dubinsky, & Rizzo, 2010). They described four factors associated with decreased driving ability in dementia patients: history of crashes or citations, informant-reported concerns, reduced mileage, and aggressive driving. An informant-reported AAN Caregiver Driving Safety Questionnaire was designed with these elements, and the current study was the first to explore the factor structure of this questionnaire. Additionally, we examined associations between these factors and cognitive and behavioral measures in patients with mild cognitive impairment or early Alzheimer's disease and their informants. Exploratory factor analysis revealed a four-component structure, consistent with the theory behind the AAN scale composition. These four factor scores also were significantly associated with performance on cognitive screening instruments and informant reported behavioral dysfunction. Regressions revealed that behavioral dysfunction predicted caregiver concerns about driving safety beyond objective patient cognitive dysfunction. In this first known quantitative exploration of the scale, our results support continued use of this scale in office driving safety assessments. Additionally, patient behavioral changes predicted caregiver concerns about driving safety over and above cognitive status, which suggests that caregivers may benefit from psychoeducation about cognitive factors that may negatively impact driving safety.

Design concepts and safety concerns of the small and medium size reactors (SMR)

International Nuclear Information System (INIS)

Seul, Kwang Won; Lee, Jae Hun; Kim, Hho Jung

1998-01-01

The small and medium size reactors (SMR) and interface facilities such as desalination plant are expected to be located near the population area because of restrictions in transporting the plant products such as fresh water to long distance area. To protect the public around the plant facility from the possible release of radioactive materials, the design development of the SMR is focusing on an enhancement of the safety and reliability as well as the economics. In this study, the major safety concepts of the SMR designs significantly different from the current PWR designs are investigated and the safety concerns applicable to the integrated SMR design of Korea (called SMART), were identified. Those safety issues include the use of proven technology, application of strengthening defense in depth, event categorization and selection, simplification of emergency planning, determination of accident source terms and so on. The efforts to resolve the safety concerns in the design stage will provide an improvement of the safety of the SMART design

Socializing Young People to Ethics via Play Experience: Browser Games and Parental Concerns for Safety Online

Directory of Open Access Journals (Sweden)

Divina Meigs

2009-01-01

Full Text Available This paper considers an online game and its relation to safety and privacy, in order to examine social and ethical issues raised by parental concern over harmful content. To gain real insights on the responsibility of adults, it develops a hands-on approach that takes into account the major stakeholders, especially young people and the related circle of people around them. Therefore the research question that is raised is: how do browser games provide reassurance to parents about their children’s safety and privacy? The issue of safety online is explored in three parts, using an ethnographic research framework: it explores a specific online game, it provides a profile of participants, it analyses their types of actions in relation to safety and privacy, and discusses the results in terms of incidence of risk, peer-monitoring and community control. The findings show that there is a rather strong tendency to self-regulation, but that tendency is partly due to a strong presence of mediating adults and peers. The results are discussed in terms of incidence of risk, peer-monitoring and networked means of control on the one hand, and in terms of scientific contribution to socialization theory on the other hand. They lead to final considerations on the repertoire of ethical strategies set up online and its meaning for the concerns of adults towards online risk as well as the need for policies on regulation and self-regulation. They also lead to extensions on the socialization to norms and the appropriation of ethics by young people.

Long-term criticality safety concerns associated with surplus fissile material disposition

International Nuclear Information System (INIS)

Choi, J.S.

1995-01-01

A substantial inventory of surplus fissile material would result from ongoing and planned dismantlement of US and Russian nuclear weapons. This surplus fissile material could be dispositioned by irradiation in nuclear reactors, and the resulting spent MOx fuel would be similar in radiation characteristics to regular LWR spent UO2 fuel. The surplus fissile material could also be immobilized into high-level waste forms, such as borosilicate glass, synroc, or metal-alloy matrix. The MOx spent fuel, or the immobilized waste forms, could then be directly disposed of in a geologic repository. Long-term criticality safety concerns arise because the fissile contents (i.e., Pu-239 and its decay daughter U-235) in these waste forms are higher than in LWR spent UO2 fuel. MOx spent fuel could contain 3 to 4 wt% of reactor-grade plutonium, compared to only 0.9 wt% of plutonium in LWR spent UO2 fuel. At some future time (tens of thousand of years), when the waste forms had deteriorated due to intruding groundwater, the water could mix with the long-lived fissile materials to form into a critical system. If the critical system is self-sustaining, somewhat like the natural-occurring reactor in OKLO, fission products produced could readily be available for dissolution and release out to the accessible environment, adversely affecting public health and safety. This paper will address ongoing activities to evaluate long-term criticality safety concerns associated with disposition of fissile material in a geologic setting. Issues to be addressed include the identification of a worst-case water-intrusion scenario and waste-form geometries which present the most concern for long-term criticality safety; and suggests of technical solutions for such concerns

Risk-based evaluation tool for safety-related maintenance involving scaffolding

International Nuclear Information System (INIS)

Stevens, C.; Azizi, M.; Massman, M.

1988-01-01

The US Nuclear Regulatory Commission (NRC) has expressed a general concern that transient materials in and around safety systems at nuclear power plants represent a seismic safety hazard to the plant, in particular, the uncontrolled use of scaffolding during maintenance activities. Currently, most plants perform a seismic safety analysis for all uses of scaffolding near safety-related equipment to determine appropriate tie-down locations, scaffolding reinforcements, etc. This is both time-consuming and, for the most part, unnecessary. A workable engineering solution based on risk analysis techniques has been developed and is being used at the Palo Verde nuclear generating station (PVNGS)

Electronic Health Record-Related Safety Concerns: A Cross-Sectional Survey of Electronic Health Record Users

Science.gov (United States)

Pajunen, Tuuli; Saranto, Kaija; Lehtonen, Lasse

2016-01-01

Background The rapid expansion in the use of electronic health records (EHR) has increased the number of medical errors originating in health information systems (HIS). The sociotechnical approach helps in understanding risks in the development, implementation, and use of EHR and health information technology (HIT) while accounting for complex interactions of technology within the health care system. Objective This study addresses two important questions: (1) “which of the common EHR error types are associated with perceived high- and extreme-risk severity ratings among EHR users?”, and (2) “which variables are associated with high- and extreme-risk severity ratings?” Methods This study was a quantitative, non-experimental, descriptive study of EHR users. We conducted a cross-sectional web-based questionnaire study at the largest hospital district in Finland. Statistical tests included the reliability of the summative scales tested with Cronbach’s alpha. Logistic regression served to assess the association of the independent variables to each of the eight risk factors examined. Results A total of 2864 eligible respondents provided the final data. Almost half of the respondents reported a high level of risk related to the error type “extended EHR unavailability”. The lowest overall risk level was associated with “selecting incorrectly from a list of items”. In multivariate analyses, profession and clinical unit proved to be the strongest predictors for high perceived risk. Physicians perceived risk levels to be the highest (Prisk levels (PeLearning courses on EHR-use was associated with lower risk for some of the risk factors. Conclusions Based on a large number of Finnish EHR users in hospitals, this study indicates that HIT safety hazards should be taken very seriously, particularly in operating rooms, procedure units, emergency departments, and intensive care units/critical care units. Health care organizations should use proactive and

The safety concept of the Federal Government concerning waste management

International Nuclear Information System (INIS)

Pfaffelhuber, J.K.

1976-01-01

The safety concept of the FRG concerning waste management is based on the ultimate aim of having in operation until 1985 nuclear power plants with a capacity of approx. 45,000 MWe, i.e. 50 nuclear power plants with an annual fuel consumption of 1,500 tons. A critical survey shows that there is still a great number of questions to be solved, concerning the fuel cycle in particular in terms of industrial standards, and that various problems ought to be the subject of R and D activities. Activities in the field of waste management so far are concerned only with project studies and details of project definition studies. On the one hand, the principles of the safety concept for waste management are to make possible and to guarantee the operation of nuclear facilities, and on the other hand, they are to subject those facilities which serve the purpose of waste disposal to similar safety regulations as the nuclear power plants are subjected to. The integrated waste disposal system of the Federal government for CWRs until the mid eighties is described. R+D activities are still necessary, in particular concerning reprocessing techniques, techniques in the reprocessing of Pu, the conditioning of highly active wastes, testing final storage techniques, and in the field of retention of gaseous radioactive nuclides (iodine, krypton, tritium) and of safeguarding waste disposal parks against terrorists and sabotage. The legal basis for the protection of the citizen is the Atomic Energy Act and its ordinances, EURATOM basic standards, and ICRP recommendations, some of which were tightened up for the FRG. Some recommendations of the Strahlenschutzkommision - radiation exposure, storage and separation of 85 Kr, 129 J, 131 J, and 133 Xe - are dealt with in detail. (HPH/LN) [de

Shelf life and safety concerns of bakery products--a review.

Science.gov (United States)

Smith, James P; Daifas, Daphne Phillips; El-Khoury, Wassim; Koukoutsis, John; El-Khoury, Anis

2004-01-01

Bakery products are an important part of a balanced diet and, today, a wide variety of such products can be found on supermarket shelves. This includes unsweetened goods (bread, rolls, buns, crumpets, muffins and bagels), sweet goods (pancakes, doughnuts, waffles and cookies) and filled goods (fruit and meat pies, sausage rolls, pastries, sandwiches, cream cakes, pizza and quiche). However, bakery products, like many processed foods, are subject to physical, chemical and microbiological spoilage. While physical and chemical spoilage limits the shelf life of low and intermediate moisture bakery products, microbiological spoilage by bacteria, yeast and molds is the concern in high moisture products i.e., products with a water activity (a(w)) > 0.85. Furthermore, several bakery products also have been implicated infoodborne illnesses involving Salmonella spp., Listeria monoctyogenes and Bacillus cereus, while Clostridium botulinum is a concern in high moisture bakery products packaged under modified atmospheres. This extensive review is divided into two parts. Part I focuses on the spoilage concerns of low, intermediate and high moisture bakery products while Part II focuses on the safety concerns of high moisture bakery products only. In both parts, traditional and novel methods of food preservation that can be used by the bakery industry to extend the shelf life and enhance the safety of products are discussed in detail.

HTGR safety research concerns at NRC

International Nuclear Information System (INIS)

Minogue, R.B.

1982-01-01

A general discussion of HTGR technical and safety-related problems is given. The broad areas of current research programs specific to the Fort St. Vrain reactor and applicable to HTGR technology are summarized

Safety concerns and suggested design approaches to the HTGR Reformer process concept

Energy Technology Data Exchange (ETDEWEB)

Green, R.C.

1981-09-01

This report is a safety review of the High Temperature Gas-Cooled Reactor Reformer Application Study prepared by Gas-Cooled Reactor Associates (GCRA) of La Jolla, California. The objective of this review was to identify safety concerns and suggests design approaches to minimize risk in the High Temperature Gas-Cooled Reactor Reformer (HTGR-R) process concept.

Safety concerns and suggested design approaches to the HTGR Reformer process concept

International Nuclear Information System (INIS)

Green, R.C.

1981-09-01

This report is a safety review of the High Temperature Gas-Cooled Reactor Reformer Application Study prepared by Gas-Cooled Reactor Associates (GCRA) of La Jolla, California. The objective of this review was to identify safety concerns and suggests design approaches to minimize risk in the High Temperature Gas-Cooled Reactor Reformer (HTGR-R) process concept

Priming performance-related concerns induces task-related mind-wandering.

Science.gov (United States)

Jordano, Megan L; Touron, Dayna R

2017-10-01

Two experiments tested the hypothesis that priming of performance-related concerns would (1) increase the frequency of task-related mind-wandering (i.e., task-related interference; TRI) and (2) decrease task performance. In each experiment, sixty female participants completed an operation span task (OSPAN) containing thought content probes. The task was framed as a math task for those in a condition primed for math-related stereotype threat and as a memory task for those in a control condition. In both studies, women whose performance-related concerns were primed via stereotype threat reported more TRI than women in the control. The second experiment used a more challenging OSPAN task and stereotype primed women also had lower math accuracy than controls. These results support the "control failures×current concerns" framework of mind-wandering, which posits that the degree to which the environmental context triggers personal concerns influences both mind-wandering frequency and content. Copyright © 2017 Elsevier Inc. All rights reserved.

List of reports from BMFT, CEA, EPRI, JSTA and USNRC concerning reactor safety research

International Nuclear Information System (INIS)

1982-02-01

This list reviews reports from the Federal Republic of Germany, from France from Japan and from the United States of America concerning special problems in the field of reactor safety research. According to the cooperation in the Gesellschaft fuer Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Programm of the BMFT, reporting organization. The list of reports appears quarterly. (orig.) [de

Parental safety concerns--a barrier to sport and physical activity in children?

Science.gov (United States)

Boufous, Soufiane; Finch, Caroline; Bauman, Adrian

2004-10-01

To examine the extent to which parents and carers perceive injury and safety risks as serious enough to prevent or discourage their children, aged 5-12 years, from participating in sports/physical activity and to identify factors that influence these perceptions. An analysis of the 2001 New South Wales Child Health Survey. More than one-quarter of parents/ carers of active children aged 5-12 years reported discouraging or preventing children from playing a particular sport (34.7% for boys and 16.6% for girls) because of injury and safety concerns. In boys, the most frequently discouraged sport was rugby league (23.2%), followed by rugby union (7.5%) and Australian rules football (2.8%). Among girls, the most frequently discouraged activities were rollerblading (2.7%), rugby league (2.3%) and soccer (2.1%). Multivariate analysis shows that factors independently associated with parents' decision to prevent/discourage their child from engaging in sport/physical activity include their child's age and gender, language spoken at home, presence of disability, and the respondent's relation to the child. Efforts need to be made to modify some sports/ activities, such as football codes, in order to minimise injury and to ensure that children continue enjoying their favourite activity well into adulthood. Guidelines designed to promote physical activity among children and young adolescents need to take into account parental concerns regarding the associated risk of injury.

LMFBR conceptual design study: an overview of environmental and safety concerns

International Nuclear Information System (INIS)

Brenchley, D.L.

1981-06-01

The US Department of Energy (DOE) initiated the Liquid Metal Fast Breeder (LMFBR) Conceptual Design Study (CDS) with the objective of maintaining a viable breeder option. The project is scheduled to be completed in FY-1981 but decisions regarding plant construction will be delayed until at least 1985. This report provides a review of the potential environmental and safety engineering concerns for the CDS and recommends specific action for the Environmental and Safety Engineering Division of DOE

LMFBR conceptual design study: an overview of environmental and safety concerns

Energy Technology Data Exchange (ETDEWEB)

Brenchley, D.L.

1981-06-01

The US Department of Energy (DOE) initiated the Liquid Metal Fast Breeder (LMFBR) Conceptual Design Study (CDS) with the objective of maintaining a viable breeder option. The project is scheduled to be completed in FY-1981 but decisions regarding plant construction will be delayed until at least 1985. This report provides a review of the potential environmental and safety engineering concerns for the CDS and recommends specific action for the Environmental and Safety Engineering Division of DOE.

Safety concerns in composite manufacturing and machining

Science.gov (United States)

Asmatulu, Eylem; Alonayni, Abdullah; Alamir, Mohammed

2018-03-01

Because of the superior properties, composites have been used in many industrial applications, including aerospace, wind turbines, ships, cars, fishing rods, storage tanks, swimming pool panels, and baseball bats. Each application may require different combinations of reinforcements and matrices, which make the manufacturing safety even more challenging while working on these substances. In this study, safety issues in composite manufacturing and machining were investigated in detail, and latest developments were provided for workers. The materials most frequently used in composite manufacturing, such as matrix (polyester, vinylester, phenolic, epoxies, methyl ethyl ketone peroxide, benzoil peroxide, hardeners, and solvents), and reinforcement materials (carbon, glass and Kevlar fibers, honeycomb and foams) can be highly toxic to human body. These materials can also be very toxic to the environment when dumped out uncontrollably, creating major future health and environmental concerns. Throughout the manufacturing process, workers inhale vapors of the liquid matrix, hardeners and solvents / thinners, as well as reinforcement materials (chopped fibers and particles) in airborne. Milling, cutting and machining of the composites can further increase the toxic inhalations of airborne composite particles, resulting in major rashes, irritation, skin disorders, coughing, severe eye and lung injury and other serious illnesses. The major portions of these hazardous materials can be controlled using appropriate personal protective equipment for the chemicals and materials used in composite manufacturing and machining. This study provides best possible safety practices utilized in composite manufacturing facilities for workers, engineers and other participants.

Safety-related decision making at a nuclear power plant

International Nuclear Information System (INIS)

Vaurio, J.K.

1998-01-01

The decision making environment of an operating nuclear power plant is presented. The organizations involved, their roles and interactions as well as the main influencing factors and decision criteria are described. The focus is on safety-related decisions, and the framework is based on the situation at Loviisa power station. The role of probabilistic safety assessment (PSA) is illustrated with decisions concerning plant modifications, optimization, acceptance of temporary configurations and extended repair times. Suggestions are made for rational and flexible risk-based control of allowed times to operate the plant with some components out of service. (orig.)

Perceived personal safety in relation to urban woodland vegetation – A review

OpenAIRE

Jansson, Märit; Fors, Hanna; Lindgren, Therese; Wiström, Björn

2013-01-01

Urban woodland vegetation provides people with many aesthetic, ecological and psychological benefits, but can also generate problems concerning people’s perception of safety. This paper reviews existing knowledge about perceived personal safety in relation to vegetation, particularly woodland vegetation, in urban green spaces such as parks and residential areas. Individual and social factors, but also vegetation character, maintenance and design, proved to be important for perceived personal ...

Experience on environmental qualification of safety-related components for Darlington Nuclear Generating Station

International Nuclear Information System (INIS)

Yu, A.S.; Kukreti, B.M.

1987-01-01

The proliferation of Nuclear Power Plant safety concerns has lead to increasing attention over the Environmental Qualification (EQ) of Nuclear Power Plant Safety-Related Components to provide the assurance that the safety related equipment will meet their intended functions during normal operation and postulated accident conditions. The environmental qualification of these components is also a Licensing requirement for Darlington Nuclear Generating Station. This paper provides an overview of EQ and the experience of a pilot project, in the qualification of the Main Moderator System safety-related functions for the Darlington Nuclear Generating Station currently under construction. It addresses the various phases of qualification from the identification of the EQ Safety-Related Components List, definition of location specific service conditions (normal, adbnormal and accident), safety-related functions, Environmental Qualification Assessments and finally, an EQ system summary report for the Main Moderator System. The results of the pilot project are discussed and the methodology reviewed. The paper concludes that the EQ Program developed for Darlington Nuclear Generating Station, as applied to the qualification of the Main Moderator System, contained all the elements necessary in the qualification of safety-related equipment. The approach taken in the qualification of the Moderator safety-related equipment proves to provide a sound framework for the qualification of other safety-related components in the station

Who was concerned about radiation, food safety, and natural disasters after the great East Japan earthquake and Fukushima catastrophe? A nationwide cross-sectional survey in 2012.

Science.gov (United States)

Sugimoto, Takashi; Shinozaki, Tomohiro; Naruse, Takashi; Miyamoto, Yuki

2014-01-01

Disaster-related concerns by sub-populations have not been clarified after the great East Japan earthquake and the Fukushima nuclear power plant incidents. This paper assesses who was concerned about radiation, food safety, and natural disasters among the general population in order to buffer such concerns effectively. The hypothesis that women, parents, and family caregivers were most concerned about radiation, food safety, and natural disaster was tested using a varying-intercept multivariable logistic regression with 5809 responses from a nationwide cross-sectional survey random-sampled in March 2012. Many people were at least occasionally concerned about radiation (53.5%), food safety (47.3%), and about natural disaster (69.5%). Women were more concerned than men about radiation (OR = 1.67; 95% CI = 1.35-2.06), food safety (1.70; 1.38-2.10), and natural disasters (1.74; 1.39-2.19). Parents and family care needs were not significant. Married couples were more concerned about radiation (1.53; 1.33-1.77), food safety (1.38; 1.20-1.59), and natural disasters (1.30; 1.12-1.52). Age, child-cohabitation, college-completion, retirement status, homemaker status, and the house-damage certificate of the last disaster were also associated with at least one concern. Participants from the Kanto region were more concerned about radiation (2.08; 1.58-2.74) and food safety (1.30; 1.07-1.59), which demonstrate similar positive associations to participants from Tohoku where a disaster relief act was invoked (3.36; 2.25-5.01 about radiation, 1.49; 1.08-2.06 about food safety). Sectioning the populations by gender and other demographics will clarify prospective targets for interventions, allow for a better understanding of post-disaster concerns, and help communicate relevant information effectively.

Who was concerned about radiation, food safety, and natural disasters after the great East Japan earthquake and Fukushima catastrophe? A nationwide cross-sectional survey in 2012.

Directory of Open Access Journals (Sweden)

Takashi Sugimoto

Full Text Available BACKGROUND: Disaster-related concerns by sub-populations have not been clarified after the great East Japan earthquake and the Fukushima nuclear power plant incidents. This paper assesses who was concerned about radiation, food safety, and natural disasters among the general population in order to buffer such concerns effectively. METHODS: The hypothesis that women, parents, and family caregivers were most concerned about radiation, food safety, and natural disaster was tested using a varying-intercept multivariable logistic regression with 5809 responses from a nationwide cross-sectional survey random-sampled in March 2012. RESULTS: Many people were at least occasionally concerned about radiation (53.5%, food safety (47.3%, and about natural disaster (69.5%. Women were more concerned than men about radiation (OR = 1.67; 95% CI = 1.35-2.06, food safety (1.70; 1.38-2.10, and natural disasters (1.74; 1.39-2.19. Parents and family care needs were not significant. Married couples were more concerned about radiation (1.53; 1.33-1.77, food safety (1.38; 1.20-1.59, and natural disasters (1.30; 1.12-1.52. Age, child-cohabitation, college-completion, retirement status, homemaker status, and the house-damage certificate of the last disaster were also associated with at least one concern. Participants from the Kanto region were more concerned about radiation (2.08; 1.58-2.74 and food safety (1.30; 1.07-1.59, which demonstrate similar positive associations to participants from Tohoku where a disaster relief act was invoked (3.36; 2.25-5.01 about radiation, 1.49; 1.08-2.06 about food safety. CONCLUSIONS: Sectioning the populations by gender and other demographics will clarify prospective targets for interventions, allow for a better understanding of post-disaster concerns, and help communicate relevant information effectively.

Statement on safety requirements concerning the long-term operation of the Muehleberg nuclear power station

International Nuclear Information System (INIS)

2012-12-01

This report published by the Swiss Federal Nuclear Safety Inspectorate ENSI investigates the safety requirements with respect to the long-term operation of the Muehleberg nuclear power station in Switzerland. Relevant international requirements and Swiss legal stipulations concerning the long-term operation of the power station are stated. The management of aging processes is looked at. The regular verification of the integrity of various plant components such as containments, piping, steam generation system, etc. is looked at in detail. The state-of-the-art concerning deterministic accident analyses and refitting technology are discussed, as are automated safety systems. The applicable laws, decrees and guidelines are listed in appendices

Health and safety concerns of textiles with nanomaterials

Science.gov (United States)

Almeida, L.; Ramos, D.

2017-10-01

There is a growing concern related to the effects of nanomaterials in health and safety.Nanotechnologies are already present in many consumer products, including textiles. “Nanotextiles” can be considered as traditional textiles with the incorporation of nanoparticles. They present often functionalities such as antibacterial, ultraviolet radiation protection, water and dirt repellency, self-cleaning or flame retardancy. Nanoparticles can be released from the textile materials due to different effects (abrasion and other mechanical stresses, sweat, irradiation, washing, temperature changes, etc.). It is then expectable that “nanotextiles” may release individual nanoparticles, agglomerates of nanoparticles or small particles of textile with or without nanoparticles, depending on the type of integration of the nanoparticles in textiles. The most important exposure route of the human body to nanoparticles in case of textiles is skin contact. Several standards are being developed under the auspices of the European Committee for Standardization. In this paper, it is presented the development and application of a test method to evaluate the skin exposure to nanoparticles, to evaluate the transfer of the nanoparticles from the textile to the skin by the effect of abrasion and sweat.

Shoe concerns and foot problems of wearers of safety footwear.

Science.gov (United States)

Marr, S J; Quine, S

1993-05-01

In Australia workers in many industries are required to wear safety footwear (footwear incorporating a steel toe cap). An investigation of the problems reported by 321 workers (70 per cent male) employed in a broad range of work activities and required to wear safety footwear was conducted in 1990 and 1991. Respondents were interviewed by a professionally trained podiatrist using a structured questionnaire followed by a foot examination. An extremely high percentage (91 per cent) of subjects reported one or more foot problems (which were verified by the podiatrist), and most considered that the safety footwear either caused the problem or adversely affected an existing foot condition. The main shoe concerns reported were excessive heat (65 per cent of all respondents), inflexible soles (52 per cent), weight (48 per cent) and pressure from steel toe cap (47 per cent). Certain gender differences were identified. General recommendations are made.

Study concerning the power plant control and safety equipment by integrated distributed systems

International Nuclear Information System (INIS)

Optea, I.; Oprea, M.; Stanescu, P.

1995-01-01

The paper deals with the trends existing in the field of nuclear control and safety equipment and systems, proposing a high-efficiency integrated system. In order to enhance the safety of the plant and reliability of the structure system and components, we present a concept based on the latest computer technology with an open, distributed system, connected by a local area network with high redundancy. A modern conception for the control and safety system is to integrate all the information related to the reactor protection, active engineered safeguard and auxiliary systems parameters, offering a fast flow of information between all the agencies concerned so that situations can be quickly assessed. The integrated distributed control is based on a high performance operating system for realtime applications, flexible enough for transparent networking and modular for demanding configurations. The general design considerations for nuclear reactors instrumentation reliability and testing methods for real-time functions under dynamic regime are presented. Taking into account the fast progress in information technology, we consider the replacement of the old instrumentation of Cernavoda-1 NPP by a modern integrated system as an economical and efficient solution for the next units. (Author) 20 Refs

Testing existing software for safety-related applications. Revision 7.1

International Nuclear Information System (INIS)

Scott, J.A.; Lawrence, J.D.

1995-12-01

The increasing use of commercial off-the-shelf (COTS) software products in digital safety-critical applications is raising concerns about the safety, reliability, and quality of these products. One of the factors involved in addressing these concerns is product testing. A tester's knowledge of the software product will vary, depending on the information available from the product vendor. In some cases, complete source listings, program structures, and other information from the software development may be available. In other cases, only the complete hardware/software package may exist, with the tester having no knowledge of the internal structure of the software. The type of testing that can be used will depend on the information available to the tester. This report describes six different types of testing, which differ in the information used to create the tests, the results that may be obtained, and the limitations of the test types. An Annex contains background information on types of faults encountered in testing, and a Glossary of pertinent terms is also included. This study is pertinent for safety-related software at reactors

Safety concerns us all

CERN Multimedia

SC/GS/S

2004-01-01

In spite of periodic safety inspections, risks can never be entirely excluded. The Safety Commission invites you to inform your supervisor or Territorial Safety Officer (TSO) of any hazardous situations you may be aware of. Actions to be taken following the fall of two windowpanes A few weeks ago, a windowpane fell from the third floor of an office building, causing minor damage to a car parked outside. No one was hurt in the incident. The putty holding the window in place had gradually deteriorated over time, and strong winds undoubtedly triggered the incident. A few weeks later, a sudden draft caused a window on the fifth floor of the same building to shatter and fall to the ground below. No one was hurt and there was no material damage. The incident was caused by a fan set into the opening window: as the window slammed shut, the weight of the fan caused the glass to break. What can we do to improve safety? examine the windows of our offices and workshops and report any problems or faults, such as dam...

Safety regulations concerning instrumentation and control systems for research reactors

International Nuclear Information System (INIS)

El-Shanshoury, A.I.

2009-01-01

A brief study on the safety and reliability issues related to instrumentation and control systems in nuclear reactor plants is performed. In response, technical and strategic issues are used to accomplish instrumentation and control systems safety. For technical issues there are ; systems aspects of digital I and C technology, software quality assurance, common-mode software, failure potential, safety and reliability assessment methods, and human factors and human machine interfaces. The strategic issues are the case-by-case licensing process and the adequacy of the technical infrastructure. The purpose of this work was to review the reliability of the safety systems related to these technical issues for research reactors

Automated discovery of safety and efficacy concerns for joint & muscle pain relief treatments from online reviews.

Science.gov (United States)

Adams, David Z; Gruss, Richard; Abrahams, Alan S

2017-04-01

Product issues can cost companies millions in lawsuits and have devastating effects on a firm's sales, image and goodwill, especially in the era of social media. The ability for a system to detect the presence of safety and efficacy (S&E) concerns early on could not only protect consumers from injuries due to safety hazards, but could also mitigate financial damage to the manufacturer. Prior studies in the field of automated defect discovery have found industry-specific techniques appropriate to the automotive, consumer electronics, home appliance, and toy industries, but have not investigated pain relief medicines and medical devices. In this study, we focus specifically on automated discovery of S&E concerns in over-the-counter (OTC) joint and muscle pain relief remedies and devices. We select a dataset of over 32,000 records for three categories of Joint & Muscle Pain Relief treatments from Amazon's online product reviews, and train "smoke word" dictionaries which we use to score holdout reviews, for the presence of safety and efficacy issues. We also score using conventional sentiment analysis techniques. Compared to traditional sentiment analysis techniques, we found that smoke term dictionaries were better suited to detect product concerns from online consumer reviews, and significantly outperformed the sentiment analysis techniques in uncovering both efficacy and safety concerns, across all product subcategories. Our research can be applied to the healthcare and pharmaceutical industry in order to detect safety and efficacy concerns, reducing risks that consumers face using these products. These findings can be highly beneficial to improving quality assurance and management in joint and muscle pain relief. Copyright © 2017 Elsevier B.V. All rights reserved.

IAEA activity related to safety of nuclear desalination

International Nuclear Information System (INIS)

Gasparini, M.

2000-01-01

The nuclear plants for desalination to be built in the future will have to meet the standards of safety required for the best nuclear power plants currently in operation or being designed. The current safety approach, based on the achievement of the fundamental safety functions and defence in depth strategy, has been shown to be a sound foundation for the safety and protection of public health, and gives the plant the capability of dealing with a large variety of sequences, even beyond the design basis. The Department of Nuclear Safety of the IAEA is involved in many activities, the most important of which are to establish safety standards, and to provide various safety services and technical knowledge in many Technical Co-operation assistance projects. The department is also involved in other safety areas, notably in the field of future reactors. The IAEA is carrying out a project on the safety of new generation reactors, including those used for desalination, with the objective of fostering an exchange of information on safety approaches, promoting harmonization among Member States and contributing towards the development and revision of safety standards and guidelines for nuclear power plant design. The safety, regulatory and environmental concerns in nuclear powered desalination are those related directly to nuclear power plants, with due consideration given to the coupling process. The protection of product water against radioactive contamination must be ensured. An effective infrastructure, including appropriate training, a legal framework and regulatory regime, is a prerequisite to considering use of nuclear power for desalination plants, also in those countries with limited industrial infrastructures and little experience in nuclear technology or safety. (author)

Regulation for delivery of subsidies for public relations and safety

International Nuclear Information System (INIS)

1984-01-01

The regulations provide for subsidies for the public relations activities and safety operations carried out by a local government for the local inhabitants in the vicinity of a nuclear power generation, etc. facility. This type of activity includes the dissemination of information on nuclear power, studies on securing the safety of the inhabitants and communication concerning the facility safety. The contents are as follows: limits of the subsidies, terms of subsidy allocations, the application for subsidies, determination of subsidy allocations, withdrawal of applications, the conditions to the allocations, a report on the work proceedings, a report on the results, confirmation on the sum of subsidies, withdrawal of the decision for subsidies, limitations for disposal of the properties, etc. (Mori, K.)

Regulation for delivery of subsidies for public relations and safety

International Nuclear Information System (INIS)

1985-01-01

The regulations provide for subsidies for the public relations activities and safety operations carried out by a local government for the local inhabitants in the vicinity of a nuclear power generation, etc. facility. This type of activity includes the dissemination of information on nuclear power, studies on securing the safety of the inhabitants and communication concerning the facility safety. The contents are as follows : limits of the subsidies, terms of subsidy allocations, the application for subsidies, determination of subsidy allocations, withdrawal of applications, the conditions to the allocations, a report on the work proceedings, a report on the results, confirmation on the sum of subsidies, withdrawal of the decision for subsidies, limitations for disposal of the properties, etc. (Kubozono, M.)

Measuring and improving patient safety through health information technology: The Health IT Safety Framework.

Science.gov (United States)

Singh, Hardeep; Sittig, Dean F

2016-04-01

Health information technology (health IT) has potential to improve patient safety but its implementation and use has led to unintended consequences and new safety concerns. A key challenge to improving safety in health IT-enabled healthcare systems is to develop valid, feasible strategies to measure safety concerns at the intersection of health IT and patient safety. In response to the fundamental conceptual and methodological gaps related to both defining and measuring health IT-related patient safety, we propose a new framework, the Health IT Safety (HITS) measurement framework, to provide a conceptual foundation for health IT-related patient safety measurement, monitoring, and improvement. The HITS framework follows both Continuous Quality Improvement (CQI) and sociotechnical approaches and calls for new measures and measurement activities to address safety concerns in three related domains: 1) concerns that are unique and specific to technology (e.g., to address unsafe health IT related to unavailable or malfunctioning hardware or software); 2) concerns created by the failure to use health IT appropriately or by misuse of health IT (e.g. to reduce nuisance alerts in the electronic health record (EHR)), and 3) the use of health IT to monitor risks, health care processes and outcomes and identify potential safety concerns before they can harm patients (e.g. use EHR-based algorithms to identify patients at risk for medication errors or care delays). The framework proposes to integrate both retrospective and prospective measurement of HIT safety with an organization's existing clinical risk management and safety programs. It aims to facilitate organizational learning, comprehensive 360 degree assessment of HIT safety that includes vendor involvement, refinement of measurement tools and strategies, and shared responsibility to identify problems and implement solutions. A long term framework goal is to enable rigorous measurement that helps achieve the safety

Engineering Hematopoietic Cells for Cancer Immunotherapy: Strategies to Address Safety and Toxicity Concerns.

Science.gov (United States)

Resetca, Diana; Neschadim, Anton; Medin, Jeffrey A

2016-09-01

Advances in cancer immunotherapies utilizing engineered hematopoietic cells have recently generated significant clinical successes. Of great promise are immunotherapies based on chimeric antigen receptor-engineered T (CAR-T) cells that are targeted toward malignant cells expressing defined tumor-associated antigens. CAR-T cells harness the effector function of the adaptive arm of the immune system and redirect it against cancer cells, overcoming the major challenges of immunotherapy, such as breaking tolerance to self-antigens and beating cancer immune system-evasion mechanisms. In early clinical trials, CAR-T cell-based therapies achieved complete and durable responses in a significant proportion of patients. Despite clinical successes and given the side effect profiles of immunotherapies based on engineered cells, potential concerns with the safety and toxicity of various therapeutic modalities remain. We discuss the concerns associated with the safety and stability of the gene delivery vehicles for cell engineering and with toxicities due to off-target and on-target, off-tumor effector functions of the engineered cells. We then overview the various strategies aimed at improving the safety of and resolving toxicities associated with cell-based immunotherapies. Integrating failsafe switches based on different suicide gene therapy systems into engineered cells engenders promising strategies toward ensuring the safety of cancer immunotherapies in the clinic.

The home electronic media environment and parental safety concerns: relationships with outdoor time after school and over the weekend among 9-11 year old children.

Science.gov (United States)

Wilkie, Hannah J; Standage, Martyn; Gillison, Fiona B; Cumming, Sean P; Katzmarzyk, Peter T

2018-04-05

Time spent outdoors is associated with higher physical activity levels among children, yet it may be threatened by parental safety concerns and the attraction of indoor sedentary pursuits. The purpose of this study was to explore the relationships between these factors and outdoor time during children's discretionary periods (i.e., after school and over the weekend). Data from 462 children aged 9-11 years old were analysed using generalised linear mixed models. The odds of spending > 1 h outdoors after school, and > 2 h outdoors on a weekend were computed, according to demographic variables, screen-based behaviours, media access, and parental safety concerns. Interactions with sex and socioeconomic status (SES) were explored. Boys, low SES participants, and children who played on their computer for  1 h outside after school than girls, high SES children and those playing on a computer for ≥2 h, respectively. Counterintuitive results were found for access to media devices and crime-related safety concerns as both of these were positively associated with time spent outdoors after school. A significant interaction for traffic-related concerns*sex was found; higher road safety concerns were associated with lower odds of outdoor time after school in boys only. Age was associated with weekend outdoor time, which interacted with sex and SES; older children were more likely to spend > 2 h outside on weekends but this was only significant among girls and high SES participants. Our results suggest that specific groups of children are less likely to spend their free time outside, and it would seem that only prolonged recreational computer use has a negative association with children's outdoor time after school. Further research is needed to explore potential underlying mechanisms, and parental safety concerns in more detail.

The U.S. commercial air tour industry: a review of aviation safety concerns.

Science.gov (United States)

Ballard, Sarah-Blythe

2014-02-01

The U.S. Title 14 Code of Federal Regulations defines commercial air tours as "flight[s] conducted for compensation or hire in an airplane or helicopter where a purpose of the flight is sightseeing." The incidence of air tour crashes in the United States is disproportionately high relative to similar commercial aviation operations, and air tours operating under Part 91 governance crash significantly more than those governed by Part 135. This paper reviews the government and industry response to four specific areas of air tour safety concern: surveillance of flight operations, pilot factors, regulatory standardization, and maintenance quality assurance. It concludes that the government and industry have successfully addressed many of these tenet issues, most notably by: advancing the operations surveillance infrastructure through implementation of en route, ground-based, and technological surveillance methods; developing Aeronautical Decision Making and cue-based training programs for air tour pilots; consolidating federal air tour regulations under Part 136; and developing public-private partnerships for raising maintenance operating standards and improving quality assurance programs. However, opportunities remain to improve air tour safety by: increasing the number and efficiency of flight surveillance programs; addressing pilot fatigue with more restrictive flight hour limitations for air tour pilots; ensuring widespread uptake of maintenance quality assurance programs, especially among high-risk operators not currently affiliated with private air tour safety programs; and eliminating the 25-mile exception allowing Part 91 operators to conduct commercial air tours without the safety oversight required of Part 135 operators.

Safety concerns for superconducting magnets of upcoming fusion experiments

International Nuclear Information System (INIS)

Turner, L.R.

1983-01-01

-Several fusion experiments being constructed (Tore Supra) or contemplated (DCT 8, Alcator DCT) feature superconducting coils. These coils introduce the following safety concerns: 1. Internally Cooled Conductor (ICC). ICC's are found to be highly stable against short heat pulses, even when the coolant is stagnant or moving at low steady-state velocity. However, a large heat pulse is certain to quench the conductor. Thus, determining the stability limits is vital. 2. Helium II Cooling. Helium II has both unique advantages as a coolant and unique safety problems. 3. Shorted Turns. In magnets with shorts from operational accidents, the current can switch back and forth between the short and the shorted turns, as those alternatively go normal and superconducting. 4. Hybrid Superconducting-Normal Conducting Coil System. The possibility of unequal currents in the different magnets and thus of unexpected forces on the superconducting magnets is much greater than for an all-superconducting system. Analysis of these problems are presented

Development of the international status of science and technology concerning methods and tools for operational and long-term safety cases

International Nuclear Information System (INIS)

Seher, Holger; Beuth, Thomas; Bracke, Guido; Kock, Ingo; Mayer, Kim-Marisa; Moog, Helge C.; Uhlmann, Stephan; Weyand, Torben

2016-09-01

The project ''development of the international status of science and technology concerning methods and tools for operational and long-term safety cases'' covers the following key aspects: global aspects of the methodology for scenario assumption for the operational phase following closure, potential analysis of the derives safety cases for the project Gorleben, determination of the solid phase composition of high-level radioactive wastes using geochemical modeling calculations, search for an adequate approach for the calculation of density and viscosity of saline solutions for the future use in GRS computer codes, international approaches for an integral analysis for the host rocks clay and granite in relation to the safety requirements of BMUB.

The health and safety concerns of immigrant women workers in the Toronto sportswear industry.

Science.gov (United States)

Gannagé, C M

1999-01-01

Immigrant women's conditions of work have worsened with new government and managerial strategies to restructure the Canadian apparel industry. Changes in occupational health and safety legislation have both given and taken away tools that immigrant women workers could use to improve the quality of their working lives. The author outlines a methodology for eliciting the health and safety concerns of immigrant women workers.

List of reports concerning reactor safety research from BMFT, CEA, EPRI, JSTA, and USNRC

International Nuclear Information System (INIS)

1982-12-01

This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning special problems in the field of Reactor Safety Research. According to the cooperation of the Bundesminister fuer Forschung und Technologie (BMFT) with the Commissariat a l'Energie Atomique (CEA), the Japan Science and Technologie Agency (JSTA), the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission, these Reports are available in the Gesellschaft fuer Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Programm of the BMFT, reporting organization. The list of reports appears quarterly. (orig./HP) [de

DART - for design basis justification and safety related information management

International Nuclear Information System (INIS)

Billington, A.; Blondiaux, P.; Boucau, J.; Cantineau, B.; Doumont, C.; Mared, A.

2000-01-01

DART is the acronym for Design Analysis Re-engineering Tool. It embodies a systematic and integrated approach to NPP safety re-assessment and configuration management, that makes use of Reverse Failure Mode and Effect Analysis in conjunction with a state-of-the-art relational database and a standardized data format, to permit long-term management of plant safety related information. The plant design is reviewed in a step-by-step logical fashion by constructing fault trees that identify the link between undesired consequences and their causes. Each failure cause identified in a fault tree is addressed by defining functional requirements, which are in turn addressed by documenting the specific manner in which the plant complies with the requirement. The database can be used to generate up-to-date plant safety related documents, including: SAR, Systems Descriptions, Technical Specifications and plant procedures. The approach is open-minded by nature and therefore is not regulatory driven, however the plant licensing basis will also be reviewed and documented within the same database such that a Regulatory Conformance Program may be integrated with the other safety documentation. This methodology can thus reconstitute the plant design bases in a comprehensive and systematic way, while allowing to uncover weaknesses in design. The original feature of the DART methodology is that it links all the safety related documents together, facilitating the evaluation of the safety impact resulting from any plant modification. Due to its capability to retrieve the basic justifications of the plant design, it is also a useful tool for training the young generation of plant personnel. The DART methodology has been developed for application to units 2, 3 and 4 at Vattenfall's Ringhals site in Sweden. It may be applied to any nuclear power plant or industrial facility where public safety is a concern. (author)

DART - for design basis justification and safety related information management

International Nuclear Information System (INIS)

Billington, A.; Blondiaux, B.; Boucau, J.; Cantineau, B.; Mared, A.

2001-01-01

DART is the acronym for Design Analysis Re-Engineering Tool. It embodies a systematic and integrated approach to NPP safety re-assessment and configuration management, that makes use of Reverse Failure Mode and Effect Analysis in conjunction with a state-of-the-art relational database and a standardized data format, to permit long-term management of plant safety related information. The plant design is reviewed in a step-by-step logical fashion by constructing fault trees that identify the link between undesired consequences and their causes. Each failure cause identified in a fault tree is addressed by defining functional requirements, which are in turn addressed by documenting the specific manner in which the plant complies with the requirement. The database can then be used to generate up-to-date plant safety related documents, including: SAR, Systems Descriptions, Technical Specifications and plant procedures. The approach is open-minded by nature and therefore is not regulatory driven, however the plant licensing basis will also be reviewed and documented within the same database such that a Regulatory Conformance Program may be integrated with the other safety documentation. This methodology can thus reconstitute the plant design bases in a comprehensive and systematic way, while allowing to uncover weaknesses in design. The original feature of the DART methodology is that it links all the safety related documents together, facilitating the evaluation of the safety impact resulting from any plant modification. Due to its capability to retrieve the basic justifications of the plant design, it is also a useful tool for training the young generation of plant personnel. The DART methodology has been developed for application to units 2, 3 and 4 at Vattenfall's Ringhals site in Sweden. It may be applied to any nuclear power plant or industrial facility where public safety is a concern. (author)

Cessation-related weight concern among homeless male and female smokers.

Science.gov (United States)

Pinsker, Erika Ashley; Hennrikus, Deborah Jane; Erickson, Darin J; Call, Kathleen Thiede; Forster, Jean Lois; Okuyemi, Kolawole Stephen

2017-09-01

Concern about post-cessation weight gain is a barrier to making attempts to quit smoking; however, its effect on smoking cessation is unclear. In this study we examine cessation-related weight concern among the homeless, which hasn't been studied. Homeless males (n = 320) and females (n = 110) participating in a smoking cessation RCT in the Twin Cities, Minnesota from 2009 to 2011 completed surveys on cessation-related weight concern, smoking status, and components from the Behavioral Model for Vulnerable Populations. Generalized estimating equations were used to examine baseline predictors of cessation-related weight concern at baseline, the end of treatment, and 26-weeks follow-up. Logistic regression models were used to examine the relationship between cessation-related weight concern and smoking status at the end of treatment and follow-up. Females had higher cessation-related weight concern than males. Among males, older age, Black race, higher BMI, depression, and having health insurance were associated with higher cessation-related weight concern. Among females, nicotine dependence, greater cigarette consumption, indicating quitting is more important, older age of smoking initiation, and less support to quit from family were associated with higher cessation-related weight concern. In multivariate analyses, cessation-related weight concern decreased over time among females. Cessation-related weight concern wasn't associated with smoking cessation. Although several types of characteristics predicted cessation-related weight concern among males, only smoking characteristics predicted cessation-related weight concern among females. Given the small proportion of quitters in this study (8% of males and 5% of females), further research on the impact of cessation-related weight concern on smoking cessation among the homeless is warranted.

Guideline for examination concerning the evaluation of safety in light water power reactor installations

International Nuclear Information System (INIS)

1978-01-01

This guideline was drawn up as the guide for examination when the safety evaluation of nuclear reactors is carried out at the time of approving the installation of light water power reactors. Accordingly in case of the examination of safety, it must be confirmed that the contents of application are in conformity with this guideline. If they are in conformity, it is judged that the safety evaluation of the policy in the basic design of a reactor facility is adequate, and also that the evaluation concerning the separation from the public in surroundings is adequate as the condition of location of the reactor facility. This guideline is concerned with light water power reactors now in use, but the basic concept may be the reference for the examination of the other types of reactors. If such a case occurs that the safety evaluation does not conform to this guideline, it is not excluded when the appropriate reason is clarified. The purpose of safety evaluation, the scope to be evaluated, the selection of the events to be evaluated, the criteria for judgement, the matters taken into consideration at the time of analysis, the concrete events of abnormal transient change and accident in operation, and the concrete events of serious accident and hypothetic accident are stipulated. The explanation and two appendices are attached. (Kako, I.)

Health and safety concerns os migrant workers: the experience of tunisian workers in modena, Italy

Directory of Open Access Journals (Sweden)

Faïçal Daly

2004-06-01

Full Text Available This paper examines the relatively under-researched field of healthand safety of migrant workers, with special reference to Tunisian construction workers in the city of Modena in the Italian region of Emilia-Romagna. The empirical material comes from questionnaires and interviews with Tunisian migrants, plus smaller numbers of interviews with employers and trade union representatives in Modena. The paper starts by critically reviewing the scattered literature onthe health and safety of minority workers, most of which refers to the United States and the United Kingdom. The discussion then moves to a consideration of migrant health and safety questions in the contexts of racism, discrimination, social class, working conditions, labour market segmentation and (non- regulation. Specialattention is given to the failed role of trade unions in defending the rights of minority workers, in advanced countries generally and in Italy in particular. A case study is then made of the construction sector in Italy, enriched by personal accounts of the experiences of Tunisian migrant workers in Modena. Employer and tradeunion interviews reveal a lack of concern and ability to tackle the relevant issues. Barriers to health and safety awareness training are outlined. In the conclusion, recommendations are made for policy initiatives in this area.

ED accreditation update. Physicians, medical staff may report safety concerns without fear of disciplinary action.

Science.gov (United States)

2007-11-01

Educating your staff about The Joint Commission's requirements for concerns about hospital safety and quality of care requires the ED manager to set a tone of openness and cooperation, while at the same time emphasizing your department's role in addressing such concerns: * The ED should be the first place that staff members communicate quality and safety concerns. It is only when a problem is not addressed that they should take the issue to hospital administration and, if necessary, The Joint Commission. * A single event should not trigger a report to The Joint Commission, unless it is unusually serious. Otherwise, only a series of events should trigger a report. * Reassure your staff that you care about what is reported and will act quickly on it. Educate your staff about the reporting forms, and follow up with random audits to ensure compliance.

Summary of Tiger Team Assessment and Technical Safety Appraisal recurring concerns in the Maintenance Area

International Nuclear Information System (INIS)

1993-01-01

Tiger Team Assessments and Technical Safety Appraisals (TSA) were reviewed and evaluated for concerns in the Maintenance Area (MA). Two hundred and thirty one (231) maintenance concerns were identified by the Tiger Team Assessments and TSA reports. These recurring concerns appear below. A summary of the Noteworthy Practices that were identified and a compilation of the maintenance concerns for each performance objective that were not considered as recurring are also included. Where the Tiger Team Assessment and TSA identified the operating contractor or facility by name, the concern has been modified to remove the name while retaining the intent of the comment

Genetically modified foods: safety, risks and public concerns-a review.

Science.gov (United States)

Bawa, A S; Anilakumar, K R

2013-12-01

Genetic modification is a special set of gene technology that alters the genetic machinery of such living organisms as animals, plants or microorganisms. Combining genes from different organisms is known as recombinant DNA technology and the resulting organism is said to be 'Genetically modified (GM)', 'Genetically engineered' or 'Transgenic'. The principal transgenic crops grown commercially in field are herbicide and insecticide resistant soybeans, corn, cotton and canola. Other crops grown commercially and/or field-tested are sweet potato resistant to a virus that could destroy most of the African harvest, rice with increased iron and vitamins that may alleviate chronic malnutrition in Asian countries and a variety of plants that are able to survive weather extremes. There are bananas that produce human vaccines against infectious diseases such as hepatitis B, fish that mature more quickly, fruit and nut trees that yield years earlier and plants that produce new plastics with unique properties. Technologies for genetically modifying foods offer dramatic promise for meeting some areas of greatest challenge for the 21st century. Like all new technologies, they also pose some risks, both known and unknown. Controversies and public concern surrounding GM foods and crops commonly focus on human and environmental safety, labelling and consumer choice, intellectual property rights, ethics, food security, poverty reduction and environmental conservation. With this new technology on gene manipulation what are the risks of "tampering with Mother Nature"?, what effects will this have on the environment?, what are the health concerns that consumers should be aware of? and is recombinant technology really beneficial? This review will also address some major concerns about the safety, environmental and ecological risks and health hazards involved with GM foods and recombinant technology.

Physician attitudes towards pharmacological cognitive enhancement: safety concerns are paramount.

Directory of Open Access Journals (Sweden)

Opeyemi C Banjo

2010-12-01

Full Text Available The ethical dimensions of pharmacological cognitive enhancement have been widely discussed in academic circles and the popular media, but missing from the conversation have been the perspectives of physicians - key decision makers in the adoption of new technologies into medical practice. We queried primary care physicians in major urban centers in Canada and the United States with the aim of understanding their attitudes towards cognitive enhancement. Our primary hypothesis was that physicians would be more comfortable prescribing cognitive enhancers to older patients than to young adults. Physicians were presented with a hypothetical pharmaceutical cognitive enhancer that had been approved by the regulatory authorities for use in healthy adults, and was characterized as being safe, effective, and without significant adverse side effects. Respondents overwhelmingly reported increasing comfort with prescribing cognitive enhancers as the patient age increased from 25 to 65. When asked about their comfort with prescribing extant drugs that might be considered enhancements (sildenafil, modafinil, and methylphenidate or our hypothetical cognitive enhancer to a normal, healthy 40 year old, physicians were more comfortable prescribing sildenafil than any of the other three agents. When queried as to the reasons they answered as they did, the most prominent concerns physicians expressed were issues of safety that were not offset by the benefit afforded the individual, even in the face of explicit safety claims. Moreover, many physicians indicated that they viewed safety claims with considerable skepticism. It has become routine for safety to be raised and summarily dismissed as an issue in the debate over pharmacological cognitive enhancement; the observation that physicians were so skeptical in the face of explicit safety claims suggests that such a conclusion may be premature. Thus, physician attitudes suggest that greater weight be placed upon the

Safety-related control air systems

International Nuclear Information System (INIS)

Anon.

1977-01-01

This Standard applies to those portions of the control air system that furnish air required to support, control, or operate systems or portions of systems that are safety related in nuclear power plants. This Standard relates only to the air supply system(s) for safety-related air operated devices and does not apply to the safety-related air operated device or to air operated actuators for such devices. The objectives of this Standard are to provide (1) minimum system design requirements for equipment, piping, instruments, controls, and wiring that constitute the air supply system; and (2) the system and component testing and maintenance requirements

Ordinance of 14 March 1983 concerning the Federal Commission for the Safety of Nuclear Installations

International Nuclear Information System (INIS)

1983-01-01

The Frederal Council issued a new Ordinance concerning the Federal Commission for the Safety of Nuclear Installations. This Ordinance replaces an Ordinance of 13 June 1960 and takes into account the distribution of tasks decided several years ago between the Commission, which operates on a part-time basis, and the principal Division for the Safety of Nuclear Installations attached to the Federal Office of Energy. (NEA) [fr

Concern for older parts

International Nuclear Information System (INIS)

Titus, E.; Spink, T.; Cookson, B.; Tenera, L.P.

1992-01-01

For the last half decade, regulatory expectations of the procurement process for nuclear commercial-grade safety-related materials have increase. The changes have been driven by concern for fraudulent or misrepresented parts and the loss of original equipment manufacturers. The industry responded to these concerns by developing improved procurement programs that changed how parts were specified and received and provided for verification of attributes that were critical to the successful performance of safety functions(s). Like its counterparts, Duquesne Light Company (DLCo), Beaver Valley power station began applying these enhanced requirements to procurements initiated after January 1, 1990, in response to the Nuclear Management and Resources Council initiative on dedication. Procurements prior to this data were not subject to the new requirements

Coordinated research programme on safety of RBMK type NPPs in relation to external events. V. 1. Working material

International Nuclear Information System (INIS)

1999-01-01

The present volume is a collection of progress reports which have been submitted within the scope of the CRP on safety of RBMK type NPPs in relation to external events including seismic related papers and man-induced events (explosions and airplane crash). It includes papers concerned with experience related to RBMK equipment testing and calculations of seismic resistance, soil-structure interactions analysis, safety assurance, aircraft impact qualification and other external events for RBMK type NPP, seismic stability of NPPs in Eastern Europe, probabilistic assessment of NPP safety under aircraft impact, dynamic analysis of NPPs, screening of external hazards for NPP

Report on the handling of safety information concerning flammable gases and ferrocyanide at the Hanford waste tanks

International Nuclear Information System (INIS)

1990-07-01

This report discusses concerns safety issues, and management at Hanford Tank Farm. Concerns center on the issue of flammable gas generation which could ignite, and on possible exothermic reactions of ferrocyanide compounds which were added to single shell tanks in the 1950's. It is believed that information concerning these issues has been mis-handled and the problems poorly managed

Report on the handling of safety information concerning flammable gases and ferrocyanide at the Hanford waste tanks

Energy Technology Data Exchange (ETDEWEB)

1990-07-01

This report discusses concerns safety issues, and management at Hanford Tank Farm. Concerns center on the issue of flammable gas generation which could ignite, and on possible exothermic reactions of ferrocyanide compounds which were added to single shell tanks in the 1950's. It is believed that information concerning these issues has been mis-handled and the problems poorly managed. (CBS)

Work ability, age and its perception, and other related concerns of Ukraine health care workers.

Science.gov (United States)

Bobko, Natalia A; Barishpolets, Alexey T

2002-01-01

A sample of 250 health care workers aged 18 to 68 (mean = 32.5 years) completed the Survey of Health Care Professionals. Self-ratings of their social skills, mental capacity, and physical capability corresponded to their ratings of work demands. Physical tiredness and tension were rated higher than mental tiredness. Worker age did not affect self-ratings of work performance, but physical and mental tiredness increased with increases in the age that one felt. The younger participants felt compared to their calendar ages, the better the level of current work ability they reported. The main concerns of workers were connected with off-the-job factors, most likely caused by the economic crisis and unfavorable ecological conditions in Ukraine. More than half of the participants were quite a bit or extremely concerned with changes in the cost of living, water quality, food safety, and radiation. The variable most closely related to these concerns is the discrepancy between calendar age and how old one feels. Coping strategies of workers can be related to sleeping, entertainment, and other off-the-job activities. These behaviors are related to the discrepancy between calendar age and how old one looks and feels, as well as felt age.

Losing nuclear expertise - A safety concern

International Nuclear Information System (INIS)

Ziakova, M.

2002-01-01

Full text: Since the mid of eighties several important changes in human beings behaviour, which influence nuclear field, can be observed - the loss of interest in studying technical disciplines (namely nuclear), strong pressure of environmental movements, stagnation of electricity consumption and deregulation of electric markets. All these factors create conditions which are leading to the decrease of job positions related to the nuclear field connected particularly with research, design and engineering. Loss of interest in studying nuclear disciplines together with the decrease of number of job positions has led to the declining of university enrolments, closing of university departments and research reactors. In this manner just a very small number of appropriately educated new experts are brought In the same moment the additional internal factor - the relative ageing of the human workforce on both sites operators of nuclear facilities and research and engineering organisations can be observed. All these factors, if not addressed properly, could lead to the loss of nuclear expertise and the loss of nuclear expertise represents the direct thread to the nuclear safety. The latest studies have shown that at present NPPs cannot be replaced by other kinds of electric sources and in no case by renewable ones in an efficient manner. Therefore it is necessary to carefully manage knowledge gathered in the nuclear field during the years and to keep on the nuclear safety research, education and training to ensure and upgrade safe and reliable operation of existing and future nuclear facilities. This is responsibility of both the governments of the states using nuclear applications and owners of nuclear facilities. (author)

Safety Issues Concerning the Medical Use of Cannabis and Cannabinoids

Directory of Open Access Journals (Sweden)

Mark A Ware

2005-01-01

Full Text Available Safety issues are a major barrier to the use of cannabis and cannabinoid medications for clinical purposes. Information on the safety of herbal cannabis may be derived from studies of recreational cannabis use, but cannabis exposure and effects may differ widely between medical and recreational cannabis users. Standardized, quality-controlled cannabinoid products are available in Canada, and safety profiles of approved medications are available through the Canadian formulary. In the present article, the evidence behind major safety issues related to cannabis use is summarized, with the aim of promoting informed dialogue between physicians and patients in whom cannabinoid therapy is being considered. Caution is advised in interpreting these data, because clinical experience with cannabinoid use is in the early stages. There is a need for long-term safety monitoring of patients using cannabinoids for a wide variety of conditions, to further guide therapeutic decisions and public policy.

Fire safety of wood construction

Science.gov (United States)

Robert H. White; Mark A. Dietenberger

2010-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements and related fire performance data are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Because basic data...

Patient safety: Safety culture and patient safety ethics

DEFF Research Database (Denmark)

Madsen, Marlene Dyrløv

2006-01-01

,demonstrating significant, consistent and sometimes large differences in terms of safety culture factors across the units participating in the survey. Paper 5 is the results of a study of the relation between safety culture, occupational health andpatient safety using a safety culture questionnaire survey......Patient safety - the prevention of medical error and adverse events - and the initiative of developing safety cultures to assure patients from harm have become one of the central concerns in quality improvement in healthcare both nationally andinternationally. This subject raises numerous...... challenging issues of systemic, organisational, cultural and ethical relevance, which this dissertation seeks to address through the application of different disciplinary approaches. The main focus of researchis safety culture; through empirical and theoretical studies to comprehend the phenomenon, address...

Enacting laws concerning radiation safety management for students using X-rays and electron beams under 1 MeV

International Nuclear Information System (INIS)

Nishizawa, Kunihide; Shibata, Michihiro; Saze, Takuya

2004-01-01

Laws concerning radiation safety management were analyzed from the point of view of defining precisely what is meant by radiation and what is meant by the subject. There are no laws to protect students from radiation hazards when using X-rays and electron beams under 1 MeV for research and/or education. The Law concerning Technical Standards for Preventing Radiation Hazards gives the authorities the power to enact new rules and regulations that will protect the students. The Radiation Council must take charge for enactment of all laws regarding radiation safety management. (author)

ENSI’s synopsis concerning the enhancement of safety margins; Zusammenfassung des ENSI zur Erhöhung der Sicherheitsmargen

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-06-15

This press release issued by the Swiss Federal Nuclear Safety Inspectorate ENSI discusses the results of its probabilistic safety analysis on the safety margins for Swiss nuclear power stations that was made after the Fukushima nuclear accident. External incidents such as earthquakes and flooding and their impact on the power stations are analysed by the ERSIM project concerning the enhancement of safety margins. Three shut-down scenarios are discussed. The safety margins with respect to earthquakes and flooding for all four nuclear power station sites are discussed in detail.

Factors to Consider When Balancing Campus Safety Concerns with Students' Civil Rights

Science.gov (United States)

Ingersoll, Julia S.

2017-01-01

On April 16, 2007, a student at Virginia Tech University, known to be mentally ill, went on a rampage shooting 49 people on campus before taking his own life. When it was over, 32 people were dead, and the concept of a safe campus was forever changed. The incident revealed the inherent conflicts between campus safety concerns and students' civil…

Safety guidebook relative to the disposal of radioactive wastes in deep geologic formation

International Nuclear Information System (INIS)

2008-01-01

The French nuclear safety authority (ASN) initiated in 2003 a revision process of the objectives to be considered during the research and work steps of the implementation of a radioactive waste storage facility in deep geologic formations. The purpose of this document is to define the safety objectives that have to be retained at each step of this implementation, from the site characterization to the closure of the facility. This update takes into account the works carried out by the ANDRA (French national agency of radioactive wastes) in the framework of the law from December 30, 1991, and the advices of the permanent experts group about these works. It takes also into consideration the international research works in this domain and the choices defined in the program law no 2006-739 from June 28, 2006 relative to the sustainable management of radioactive materials and wastes. The main modifications concern: the notion of reversibility, the definition of the safety functions of disposal components, the safety goals and the design principles assigned to waste packages, the control of nuclear materials and the monitoring objectives of the facility. The documents treats of the following points: 1 - the objectives of public health and environment protection; 2 - the safety principles and the safety-related design bases of the facility; and 3 - the method used for demonstrating the disposal safety. (J.S.)

The root cause of patient safety concerns in an Internet pharmacy.

Science.gov (United States)

Montoya, Isaac D

2008-07-01

The Internet has become a revolutionary technology that affords worldwide opportunities never seen before. One such opportunity is the purchase of drugs over the Internet and the business of Internet pharmacies which has become prolific. Associated with this proliferation is the concern for patient safety. Numerous studies have shown that drugs purchased over the Internet come from pharmacies in a country other than the one where the patient resides and these pharmacies are not licensed, sometimes provide drugs without a prescription and that are not of the same composition as they should be, and do not provide adequate directions to the patient. In addition, the packaging of the drugs may be compromised resulting in altered medication. This paper examines the root cause of patient safety issues in Internet pharmacies. A review of the literature including the marketing literature was conducted. Healthcare marketing concepts guide business owners to identify patients' wants and distinguish them from their needs. Marketing principles detail aggressive marketing strategies within an organization's mission and in an ethical manner. Some Internet pharmacies misinterpret proven marketing principles and become overly aggressive in the market place focusing only on sales and profit rather than focusing on patient safety and long-term success of the Internet pharmacy.

Safety design guide for safety related systems for CANDU 9

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

1996-03-01

In general, two types of safety related systems and structures exist in the nuclear plant; The one is a systems and structures which perform safety functions during the normal operation of the plant, and the other is a systems and structures which perform safety functions to mitigate events caused by failure of the normally operating systems or by naturally occurring phenomena. In this safety design guide, these systems are identified in detail, and the major events for which the safety functions are required and the major safety requirements are identified in the list. As the probabilistic safety assessments are completed during the course of the project, additions or deletions to the list may be justified. 3 tabs. (Author) .new

Safety design guide for safety related systems for CANDU 9

Energy Technology Data Exchange (ETDEWEB)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young [Korea Atomic Energy Research Institute, Daeduk (Korea, Republic of); Wright, A.C.D. [Atomic Energy of Canada Ltd., Toronto (Canada)

1996-03-01

In general, two types of safety related systems and structures exist in the nuclear plant; The one is a systems and structures which perform safety functions during the normal operation of the plant, and the other is a systems and structures which perform safety functions to mitigate events caused by failure of the normally operating systems or by naturally occurring phenomena. In this safety design guide, these systems are identified in detail, and the major events for which the safety functions are required and the major safety requirements are identified in the list. As the probabilistic safety assessments are completed during the course of the project, additions or deletions to the list may be justified. 3 tabs. (Author) .new.

Criteria for safety-related operator actions

International Nuclear Information System (INIS)

Gray, L.H.; Haas, P.M.

1983-01-01

The Safety-Related Operator Actions (SROA) Program was designed to provide information and data for use by NRC in assessing the performance of nuclear power plant (NPP) control room operators in responding to abnormal/emergency events. The primary effort involved collection and assessment of data from simulator training exercises and from historical records of abnormal/emergency events that have occurred in operating plants (field data). These data can be used to develop criteria for acceptability of the use of manual operator action for safety-related functions. Development of criteria for safety-related operator actions are considered

Development of safety related technology and infrastructure for safety assessment

International Nuclear Information System (INIS)

Venkat Raj, V.

1997-01-01

Development and optimum utilisation of any technology calls for the building up of the necessary infrastructure and backup facilities. This is particularly true for a developing country like India and more so for an advanced technology like nuclear technology. Right from the inception of its nuclear power programme, the Indian approach has been to develop adequate infrastructure in various areas such as design, construction, manufacture, installation, commissioning and safety assessment of nuclear plants. This paper deals with the development of safety related technology and the relevant infrastructure for safety assessment. A number of computer codes for safety assessment have been developed or adapted in the areas of thermal hydraulics, structural dynamics etc. These codes have undergone extensive validation through data generated in the experimental facilities set up in India as well as participation in international standard problem exercises. Side by side with the development of the tools for safety assessment, the development of safety related technology was also given equal importance. Many of the technologies required for the inspection, ageing assessment and estimation of the residual life of various components and equipment, particularly those having a bearing on safety, were developed. This paper highlights, briefly, the work carried out in some of the areas mentioned above. (author)

Brief report: Associations between in-person and electronic bullying victimization and missing school because of safety concerns among U.S. high school students.

Science.gov (United States)

Steiner, Riley J; Rasberry, Catherine N

2015-08-01

Although associations between bullying and health risk behaviors are well-documented, research on bullying and education-related outcomes, including school attendance, is limited. This study examines associations between bullying victimization (in-person and electronic) and missing school because of safety concerns among a nationally representative sample of U.S. high school students. We used logistic regression analyses to analyze data from the 2013 national Youth Risk Behavior Survey of students in grades 9-12. In-person and electronic victimization were each associated with increased odds of missing school due to safety concerns compared to no bullying victimization. Having been bullied both in-person and electronically was associated with greater odds of missing school compared to electronic bullying only for female students and in-person bullying only for male students. Collaborations between health professionals and educators to prevent bullying may improve school attendance. Published by Elsevier Ltd.

Safety Review related to Commercial Grade Digital Equipment in Safety System

International Nuclear Information System (INIS)

Yu, Yeongjin; Park, Hyunshin; Yu, Yeongjin; Lee, Jaeheung

2013-01-01

The upgrades or replacement of I and C systems on safety system typically involve digital equipment developed in accordance with non-nuclear standards. However, the use of commercial grade digital equipment could include the vulnerability for software common-mode failure, electromagnetic interference and unanticipated problems. Although guidelines and standards for dedication methods of commercial grade digital equipment are provided, there are some difficulties to apply the methods to commercial grade digital equipment for safety system. This paper focuses on regulatory guidelines and relevant documents for commercial grade digital equipment and presents safety review experiences related to commercial grade digital equipment in safety system. This paper focuses on KINS regulatory guides and relevant documents for dedication of commercial grade digital equipment and presents safety review experiences related to commercial grade digital equipment in safety system. Dedication including critical characteristics is required to use the commercial grade digital equipment on safety system in accordance with KEPIC ENB 6370 and EPRI TR-106439. The dedication process should be controlled in a configuration management process. Appropriate methods, criteria and evaluation result should be provided to verify acceptability of the commercial digital equipment used for safety function

Posiva's application for a decision in principle concerning a disposal facility for spent nuclear fuel. STUK's statement and preliminary safety appraisal

International Nuclear Information System (INIS)

Ruokola, E.

2000-03-01

In May 1999, Posiva Ltd submitted to the Government an application, pursuant to the Nuclear Energy Act, for a Decision in Principle on a disposal facility for spent nuclear fuel from the Finnish nuclear power plants. The Ministry of Trade and Industry requested the Radiation and Nuclear Safety Authority (STUK) to draw up a preliminary safety appraisal concerning the proposed disposal facility. In the beginning of this report, STUK's statement to the Ministry and Industry concerning the proposed disposal facility is given. In that statement, STUK concludes that the Decision in Principle is currently justified from the standpoint of safety. The statement is followed by a safety appraisal, where STUK deems, how the proposed disposal concept, site and facility comply with the safety requirements included in the Government's Decision (478/1999). STUK's preliminary safety appraisal was supported by contributions from a number of outside experts. A collective opinion by an international group of ten distinguished experts is appended to this report. (orig.)

DOE Safety Metrics Indicator Program (SMIP) Fiscal Year 2000 Annual Report of Packaging- and Transportation-related Occurrences

International Nuclear Information System (INIS)

Dickerson, L.S.

2001-01-01

The U.S. Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS) is an interactive computer system designed to support DOE-owned or -operated facilities in reporting and processing information concerning occurrences related to facility operations. The Oak Ridge National Laboratory has been charged by the DOE National Transportation Program Albuquerque (NTPA) with the responsibility of retrieving reports and information pertaining to packaging and transportation (P and T) incidents from the centralized ORPS database. These selected reports are analyzed for safety concerns, trends, potential impact on P and T operations, and ''lessons learned'' in P and T safety. To support this analysis and trending, the Safety Metrics Indicator Program (SMIP) was established by the NTPA in fiscal year (FY) 1998. Its chief goal is to augment historical reporting of occurrence-based information by providing (1) management notification of those incidents that require attention, (2) an accurate picture of contractors' P and T-related performance, and (3) meaningful statistics on occurrences at particular sites, including comparisons among different contractor sites and between DOE and the private sector. This annual report contains information on those P and T-related occurrences reported to the ORPS during the period from October 1, 1999, through September 30, 2000. Only those incidents that occur in preparation for transport, during transport, and during unloading of hazardous material are considered as packaging- or transportation-related occurrences

Nuclear power plant safe operation principles and some topics concerning systems reliability analysis

International Nuclear Information System (INIS)

Borsky, M.; Kreim, R.; Stanicek, J.

1997-01-01

General safety criteria are specified, and nuclear power plant equipment is classified into systems either important or unimportant for nuclear safety. The former class is subdivided into safety systems and safety related systems. The safety requirements concern earthquakes, storms, fires, floods, man-induced events, and equipment failures. The actual state of systems important for safety is described. (M.D.)

Qualification of safety-related valve actuators

International Nuclear Information System (INIS)

Anon.

1981-01-01

This Standard describes the qualification of all types of power-driven valve actuators, including damper actuators, for safety-related functions in nuclear power generating stations. It may also be used to separately qualify actuator components. This Standard establishes the minimum requirements for, and guidance regarding, the methods and procedures for qualification of all safety-related functions of power-driven valve actuators

Highway Safety Program Manual: Volume 8: Alcohol in Relation to Highway Safety.

Science.gov (United States)

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 8 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on alcohol in relation to highway safety. The purpose and objectives of the alcohol program are outlined. Federal authority in the area of highway safety and general policies regarding…

Developments related to the National Nuclear Safety Authority of Romania

International Nuclear Information System (INIS)

Baciu, Florin

1998-01-01

The contribution presents the status of the National Commission for Nuclear Activity Control (CNCAN) as indicated by the provisions of a Romanian Government Decision of May 1998. As specified in the art.3 the main tasks of the Commission are the following: to issue authorization and exercise permits of activities in nuclear field; to supervise the applications of the provisions stipulated by the law concerning development in safety conditions of nuclear activities; to develop instructions as well as nuclear safety regulations to ensure the quality assurance and functioning in safety conditions of the nuclear facilities and plants, the protection against nuclear radiation of the professionally exposed personnel, of the population, of the environment and of the material goods, the physical protection, the records, preservation and transport of radioactive material and of fissionable materials as well as the management of radioactive waste; organizes expert and is responsible for the state control concerning the integrated application of the law provisions in the field of quality constructions in which nuclear installations of national interest are located, during all the phases and for all the components of the quality system in this field; issues specialty and information documentation specific to its own activity, provides the information of the public through official publication, official statements to the press and other specific form of information; carries out any other tasks provided by law in the field of regulations and control of nuclear activity. Author presents also the CNCAN staff number evolution, the new structure, the staff distribution at headquarters, local agencies and national radiation monitoring network. Finally, the author discusses the legal provisions related to management manual procedures

Main safety issues related to IPSN severe accident research

International Nuclear Information System (INIS)

LeComte, C.

1991-01-01

The work performed at IPSN concerning accident studies on nuclear installations is focused on the characterization of accidental sequences with three major aims: prevention, mitigation, and organization of counter-measures. As criteria to optimize all efforts made to improve nuclear safety, the radioactive dispersal in the environment must be quantified as function of internal and external radioactive products transfers. During the short-term phase of the accident, potential radioactive releases can be evaluated by the realistic code system ESCADRE. This system is validated by numerous analytical studies related to containment and fission product behavior. It will be further qualified by the results of the global experiments performed in the PHEBUS FP facility at IPSN

Nuclear safety improvement activities related to WWER-440 units in Bulgaria

International Nuclear Information System (INIS)

Gantchev, T.

1998-01-01

The systematic evaluation of the deficiencies of the original design of the WWER reactors brought to the development of a Short Term Programme for Safety Upgrading and Modernisation of Kozloduy WWER-440 units. The implementation of this Programme was completed in 1997. The strive for continuos improvement of Kozloduy Nuclear Power Plant (NPP) safety level, the new requirements of the Bulgarian Nuclear Safety Authority and the public concern initiated the development of new Complex Programme for Safety Improvement (PRG'97), now in a process of implementation. (author)

Nuclear safety. Concerns about the nuclear power reactors in Cuba

International Nuclear Information System (INIS)

Wells, Jim; Aloise, Gene; Flaherty, Thomas J.; Fitzgerald, Duane; Zavala, Mario; Hayward, Mary Alice

1992-09-01

the atmosphere, contains defective welds. Another said that reactor operator trainees have received training on inadequate reactor simulators. In contrast, a representative of the Cuban government told us that Cuba wants to build its reactor in accordance with safety standards. Also, according to information provided to us by a representative of the Russian government, Cuba's reactor has been constructed according to safety rules that take into account, among other things, the possible impacts of an earthquake. State Department, NRC, and DOE officials have expressed a number of concerns about the construction and operation of Cuba's nuclear power reactors. According to State Department officials, the United States maintains a comprehensive embargo on any U.S. transactions with Cuba and discourages other countries from providing assistance, except for safety purposes, to Cuba's nuclear power program. The United States would prefer that the construction of the reactors never be completed and wants Cuba to sign the Non-Proliferation Treaty or the Treaty of Tlatelolco, both of which bind signatories to blanket nonproliferation commitments for their entire nuclear program, before the United States considers reversing its policy of discouraging other countries from assisting Cuba with the construction of the reactors. The United States has asked Russia to cease providing any nuclear assistance until Cuba has signed either treaty. NRC officials are aware of, but could not verify, the Cuban emigres' allegations of safety deficiencies because available information was limited. They said, however, that if the allegations were true, the cited deficiencies could affect the safety of the reactors operation. In addition, they expressed concern about the ability of Cuba's industrial infrastructure to support the nuclear power reactors, the lack of a regulatory structure, the adequacy of training for reactor operators, the quality of the civil construction, and the design of the

Safety-related control air systems - approved 1977

International Nuclear Information System (INIS)

Anon.

1978-01-01

This standard applies to those portions of the control air system that furnish air required to support, control, or operate systems or portions of systems that are safety related in nuclear power plants. This standard relates only to the air supply system(s) for safety-related air operated devices and does not apply to the safety-related air operated device or to air operated actuators for such devices. The objectives of this standard are to provide (1) minimum system design requirements for equipment, piping, instruments, controls, and wiring that constitute the air supply system; and (2) the system and component testing and maintenance requirements

Ecological Issues Related to Children's Health and Safety

Science.gov (United States)

Aldridge, Jerry; Kohler, Maxie

2009-01-01

Issues concerning the health and safety of children and youth occur at multiple levels. Bronfenbrenner (1995) proposed an ecological systems approach in which multiple systems interact to enhance or diminish children's development. The same systems are at work in health promotion. The authors present and review articles that reflect the multiple…

Regulation for delivery of subsidies for public relations and safety

International Nuclear Information System (INIS)

1981-01-01

This rule is established under the provisions of the law for the proper enforcement of subsidy budgets and the ordinance for the execution of this law, and to practice these provisions. It is applied to subsidies for the expenses of popularizing the knowledge of atomic power generation to inhabitants in the surrounding areas of atomic power generating facilities, investigation on the security of inhabitants in these areas, communication and coordination concerning the safety of such facilities during and after their installation and other expenses of establishing the facilities for public relations to inhabitants in the surrounding areas of these facilities. Basic terms are defined, such as atomic power generating facility, facility related to atomic power generation, and place of business. Subsidies are delivered to prefectures, cities, towns and villages where atomic power generating facilities are or are expected to be set up, prefectures including cities, towns and villages adjacent to those where such facilities are or are expected to be established, and prefectures which include the surrounding areas of those facilities. The limits of subsidies are stipulated in the lists attached. The terms of delivery vary according to the kinds of atomic power generating facilities and related facilities. Prefectures or cities, towns and villages which intend to apply for the delivery of subsidies shall file specified applications attached with the explanation of subsidy business outlines to the director of the ministry or agency concerned. Decision and conditions of delivery, reports on the situations and results of business and other concerned matters are defined, respectively. (Okada, K.)

No 2943. Project of law relative to nuclear transparency and safety

International Nuclear Information System (INIS)

2006-03-01

This project of law comprises 5 titles dealing with: 1 - general dispositions: definition and scope of nuclear safety, security, radiation protection, operators liability, facilities in concern; 2 - the high nuclear safety authority: role and duties; 3 - public information in the domain of nuclear safety and radiation protection: information right of the public, local information commissions, high committee for nuclear safety transparency and information; 4 - basic nuclear facilities and transport of radioactive materials: applicable rules, police controls and measures, penal dispositions (investigations, sanctions); 5 - miscellaneous dispositions: changes made with respect to previous legislative texts. (J.S.)

Analysis on relation between safety input and accidents

Institute of Scientific and Technical Information of China (English)

YAO Qing-guo; ZHANG Xue-mu; LI Chun-hui

2007-01-01

The number of safety input directly determines the level of safety, and there exists dialectical and unified relations between safety input and accidents. Based on the field investigation and reliable data, this paper deeply studied the dialectical relationship between safety input and accidents, and acquired the conclusions. The security situation of the coal enterprises was related to the security input rate, being effected little by the security input scale, and build the relationship model between safety input and accidents on this basis, that is the accident model.

Parental concern about vaccine safety in Canadian children partially immunized at age 2: a multivariable model including system level factors.

Science.gov (United States)

MacDonald, Shannon E; Schopflocher, Donald P; Vaudry, Wendy

2014-01-01

Children who begin but do not fully complete the recommended series of childhood vaccines by 2 y of age are a much larger group than those who receive no vaccines. While parents who refuse all vaccines typically express concern about vaccine safety, it is critical to determine what influences parents of 'partially' immunized children. This case-control study examined whether parental concern about vaccine safety was responsible for partial immunization, and whether other personal or system-level factors played an important role. A random sample of parents of partially and completely immunized 2 y old children were selected from a Canadian regional immunization registry and completed a postal survey assessing various personal and system-level factors. Unadjusted odds ratios (OR) and adjusted ORs (aOR) were calculated with logistic regression. While vaccine safety concern was associated with partial immunization (OR 7.338, 95% CI 4.138-13.012), other variables were more strongly associated and reduced the strength of the relationship between concern and partial immunization in multivariable analysis (aOR 2.829, 95% CI 1.151-6.957). Other important factors included perceived disease susceptibility and severity (aOR 4.629, 95% CI 2.017-10.625), residential mobility (aOR 3.908, 95% CI 2.075-7.358), daycare use (aOR 0.310, 95% CI 0.144-0.671), number of needles administered at each visit (aOR 7.734, 95% CI 2.598-23.025) and access to a regular physician (aOR 0.219, 95% CI 0.057-0.846). While concern about vaccine safety may be addressed through educational strategies, this study suggests that additional program and policy-level strategies may positively impact immunization uptake.

Rowers’ Self-Reported Behaviors, Attitudes, and Safety Concerns Related to Exercise, Training, and Competition During Pregnancy

Science.gov (United States)

Mishtal, Joanna; Johnson, Teresa; Simms-Cendan, Judith

2017-01-01

Background The American College of Obstetrics and Gynecology notes that pregnant athletes require more supervision due to their involvement in strenuous training schedules throughout pregnancy. Currently, rowing is not mentioned in the guidelines despite its increasing popularity, high cardiovascular demands, and risk for abdominal trauma. Methods This study aimed to elicit information from competitive female rowers regarding exercise, training, and competition during pregnancy. We administered a survey consisting of 122 items to female Masters rowers in the United States, aged 21 to 49 years, from June to December 2013. Results A total of 224 recreational and elite rowers met the inclusion criteria. Pregnant rowers self-reported high levels of exercise engagement: 85.2% (n/N = 98/115) exercised during any past pregnancy; exercise adherence decreased throughout pregnancy with 51.3%, 42.4%, and 15.7% meeting and/or exceeding national guidelines during the first, second, and third trimesters, respectively. Rowers were significantly (p sport. Novel barriers to exercise in pregnancy included guilt towards the team and a mental barrier due to decreased performance. Healthcare providers are the number one information source for rowers regarding exercise during pregnancy. Conclusion Pregnant rowers are a relevant obstetrics population and have barriers and sport-specific safety concerns not previously identified in the literature. Rowers consider exercising in pregnancy to be important and struggle to meet exercise guidelines like the general population, indicating the need for healthcare providers to provide prenatal and antenatal education and interventions to support exercise during pregnancy even amongst athletes. PMID:28983443

Rowers' Self-Reported Behaviors, Attitudes, and Safety Concerns Related to Exercise, Training, and Competition During Pregnancy.

Science.gov (United States)

Franklin, Ashley; Mishtal, Joanna; Johnson, Teresa; Simms-Cendan, Judith

2017-08-01

Background The American College of Obstetrics and Gynecology notes that pregnant athletes require more supervision due to their involvement in strenuous training schedules throughout pregnancy. Currently, rowing is not mentioned in the guidelines despite its increasing popularity, high cardiovascular demands, and risk for abdominal trauma. Methods This study aimed to elicit information from competitive female rowers regarding exercise, training, and competition during pregnancy. We administered a survey consisting of 122 items to female Masters rowers in the United States, aged 21 to 49 years, from June to December 2013. Results A total of 224 recreational and elite rowers met the inclusion criteria. Pregnant rowers self-reported high levels of exercise engagement: 85.2% (n/N = 98/115) exercised during any past pregnancy; exercise adherence decreased throughout pregnancy with 51.3%, 42.4%, and 15.7% meeting and/or exceeding national guidelines during the first, second, and third trimesters, respectively. Rowers were significantly (p sport. Novel barriers to exercise in pregnancy included guilt towards the team and a mental barrier due to decreased performance. Healthcare providers are the number one information source for rowers regarding exercise during pregnancy. Conclusion Pregnant rowers are a relevant obstetrics population and have barriers and sport-specific safety concerns not previously identified in the literature. Rowers consider exercising in pregnancy to be important and struggle to meet exercise guidelines like the general population, indicating the need for healthcare providers to provide prenatal and antenatal education and interventions to support exercise during pregnancy even amongst athletes.

Sports injuries, drowning and exposure to radiation concern Canada Safety Council meeting

International Nuclear Information System (INIS)

Oliver, Caroline.

1979-01-01

Hazards associated with surface sports, aquatic sports and exposure to radiation were considered at a meeting of the Canada Safety Council in late 1979. The session on radiation noted that 6 of 20000 radiation workers wearing dosimeters were exposed to a dose in excess of 5 rem, the annual limit set by the Atomic Energy Control Board. Radiographers were in the job classification receiving the highest doses of ionizing radiation. Concern was expressed for the emission of damaging radiation from broken mercury vapour lamps. Increased regulation rather than training was seen as the most effective solution. (T.I.)

A decade of e-cigarettes: Limited research & unresolved safety concerns.

Science.gov (United States)

Kaisar, Mohammad Abul; Prasad, Shikha; Liles, Tylor; Cucullo, Luca

2016-07-15

It is well known that tobacco consumption is a leading cause of preventable deaths worldwide and has been linked to major diseases ranging from cancer to chronic obstructive pulmonary disease, atherosclerosis, stroke and a host of neurological/neurodegenerative disorders. In the past decade a number of alternative vaping products have hit the market, rapidly gaining consumers especially among the younger population. Electronic nicotine delivery systems or e-cigarettes have become the sought-after product due to the belief that they are much safer than traditional cigarettes. However, inadequate research and lack of regulatory guidelines for both the manufacturing process and the content of the vaping solution of the e-cigarette has become a major concern. Highly debated and unresolved questions such as whether e-cigarettes may help smokers quit and whether e-cigarettes will promote the use of nicotine among non-smokers add to the confusion of the safety of e-cigarettes. In this review article, we summarize the current understanding (and lack thereof) of the potential health impacts of e-cigarettes. We will also highlight the most recent studies (in vivo/in vitro) which seem to conflict with the broad safety claims put forward by the manufacturers. Finally, we provide potential solutions to overcome the research gap of the short and long-term health impact of e-cigarettes. Published by Elsevier Ireland Ltd.

A decade of e-cigarettes: Limited research & unresolved safety concerns

International Nuclear Information System (INIS)

Kaisar, Mohammad Abul; Prasad, Shikha; Liles, Tylor; Cucullo, Luca

2016-01-01

It is well known that tobacco consumption is a leading cause of preventable deaths worldwide and has been linked to major diseases ranging from cancer to chronic obstructive pulmonary disease, atherosclerosis, stroke and a host of neurological/neurodegenerative disorders. In the past decade a number of alternative vaping products have hit the market, rapidly gaining consumers especially among the younger population. Electronic nicotine delivery systems or e-cigarettes have become the sought-after product due to the belief that they are much safer than traditional cigarettes. However, inadequate research and lack of regulatory guidelines for both the manufacturing process and the content of the vaping solution of the e-cigarette has become a major concern. Highly debated and unresolved questions such as whether e-cigarettes may help smokers quit and whether e-cigarettes will promote the use of nicotine among non-smokers add to the confusion of the safety of e-cigarettes. In this review article, we summarize the current understanding (and lack thereof) of the potential health impacts of e-cigarettes. We will also highlight the most recent studies (in vivo/in vitro) which seem to conflict with the broad safety claims put forward by the manufacturers. Finally, we provide potential solutions to overcome the research gap of the short and long-term health impact of e-cigarettes.

A Decade of e-Cigarettes: Limited Research & Unresolved Safety Concerns

Science.gov (United States)

Kaisar, Mohammad Abul; Prasad, Shikha; Liles, Tylor; Cucullo, Luca

2016-01-01

It is well known that tobacco consumption is a leading cause of preventable deaths worldwide and has been linked to major diseases ranging from cancer to chronic obstructive pulmonary disease, atherosclerosis, stroke and a host of neurological/neurodegenerative disorders. In the past decade a number of alternative vaping products have hit the market, rapidly gaining consumers especially among the younger population. Electronic nicotine delivery systems or e-cigarettes have become the sought-after product due to the belief that they are much safer than traditional cigarettes. However, inadequate research and lack of regulatory guidelines for both the manufacturing process and the content of the vaping solution of the e-cigarette has become a major concern. Highly debated and unresolved questions such as whether e-cigarettes may help smokers quit and whether e-cigarettes will promote the use of nicotine among non-smokers add to the confusion of the safety of e-cigarettes. In this review article, we summarize the current understanding (and lack thereof) of the potential health impacts of e-cigarettes. We will also highlight the most recent studies (in vivo/in vitro) which seem to conflict with the broad safety claims put forward by the manufacturers. Finally, we provide potential solutions to overcome the research gap of the short and long-term health impact of e-cigarettes. PMID:27477296

Gender differences and demographic influences in perceived concern for driver safety and support for impaired driving countermeasures.

Science.gov (United States)

Butters, Jennifer; Mann, Robert E; Wickens, Christine M; Boase, Paul

2012-12-01

Driving safety, impaired driving, and legislation to address these concerns remain important issues. It is imperative countermeasures be targeted toward the most appropriate groups. This paper explores the potential relationship between gender and driving attitudes toward safety issues and impaired-driving countermeasures. The data are from the 2007 Impaired Driving Survey commissioned by Transport Canada and Mothers Against Drunk Driving (MADD) Canada. The survey is a, stratified by region, telephone survey of 1,514 Canadian drivers 18years of age and older with a valid driver's license who had driven within the past 30days. The findings illustrate a consistent impact of gender on these issues. Other variables were also identified as relevant factors although less consistently. Current findings suggest that strategies for building support for interventions, or for changing risk perception/concern for risky driving behaviors should be tailored by gender to maximize the potential for behavior change. This information may assist program and policy developers through the identification of more or less receptive target groups. Future research directions are also presented. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Nordic projects concerning nuclear safety

International Nuclear Information System (INIS)

Soerensen, H.C.

1988-11-01

The report describes the nature of the work done in the first half of 1988 within the field of nuclear safety (1985-89) under the Nordic program for 1985-89. Five programmes and their documentation, are described and complete lists of addresses and of persons involved is given. (AB)

Relative safety profiles of high dose statin regimens

Directory of Open Access Journals (Sweden)

Carlos Escobar

2008-06-01

Full Text Available Carlos Escobar, Rocio Echarri, Vivencio BarriosDepartment of Cardiology, Hospital Ramón y Cajal, Madrid, SpainAbstract: Recent clinical trials recommend achieving a low-density lipoprotein cholesterol level of <100 mg/dl in high-risk and <70 mg/dl in very high risk patients. To attain these goals, however, many patients will need statins at high doses. The most frequent side effects related to the use of statins, myopathy, rhabdomyolysis, and increased levels of transaminases, are unusual. Although low and moderate doses show a favourable profile, there is concern about the tolerability of higher doses. During recent years, numerous trials to analyze the efficacy and tolerability of high doses of statins have been published. This paper updates the published data on the safety of statins at high doses.Keywords: statins, high doses, tolerability, liver, muscle

"Better safe than sorry": a qualitative content analysis of participant's perspectives of fall-related concerns and balance in older women with osteoporosis after balance training.

Science.gov (United States)

Halvarsson, Alexandra; Ståhle, Agneta; Halén, Carolina; Roaldsen, Kirsti Skavberg

2015-07-03

To explore how older women with osteoporosis perceive fall-related concerns and balance in daily life after having participated in balance training. Explorative study. Semi-structured interviews were conducted with 19 women (66-84 years), with osteoporosis recruited from an ongoing RCT; participants were asked about their perceived fall-related concerns and balance. Interviews were taped and transcribed verbatim. Data were analyzed using inductive qualitative content analysis. One underlying theme emerged: "Internalized risk perception related to experience of bodily fragility", and three manifest categories: empowerment, safety and menace. A dynamic process between the categories was found, in which contextual and personal factors influenced perceptions of fall-related concerns and balance, i.e. winter season may lead a person who is highly empowered and/or uses active strategies into a situation of perception of menace and avoidance of activity. To cope with the fragility caused by osteoporosis informants had an internalized risk perception that protected them against possible threats and harm. Informants perceived improved empowerment and self-efficacy after participation in balance training. They resumed activities and became more active and independent in daily life using safety precautions and fall-prevention strategies. Depending on contextual factors, some situations still invoked fear and led to avoidance. Implication for Rehabilitation Risk awareness protecting against possible threats and harms seems to be internalized in older women living with osteoporosis. When designing fall prevention programs, it is important to recognize that contextual and personal factors have a major influence on how older women with osteoporosis perceive fall-related concerns and balance. Perception of fragility and risk seems to be a significant problem for older women with osteoporosis and health-care providers should encourage their patients to participate in tailored

RESPONSIBILITIES OF FOOD BUSINESS OPERATORS RELATED TO FOOD SAFETY: CONCERNS RELATED TO HACCP IN MICRO-BUSINESSES FOOD COMPANIES

Directory of Open Access Journals (Sweden)

T. Civera

2012-08-01

Full Text Available The research was aimed at collecting information on food safety knowledge by operators of small and less developed food businesses. This will allow to reveal what are the real drawbacks in HACCP application in these realities. Fifty meat producing plants located in Piedmont region were involved. In all the plants a questionnaire with questions on HACCP system was submitted. The analysis of the collected answers, evidenced that 42% of the operators needed to perform structural modifications in order to address the HACCP measures, whereas 40% applied modifications in working procedures. The most frequent shortcoming (44% of the answers of the HACCP system was represented by the applicability of Good Manufacturing Practices, and the most difficult control measure to be applied was the prevention of the cross-contaminations (40% of the answers. The information gathered within this project allowed to evidence the real needs of the micro businesses in the application of HACCP plan. These results can be useful for the institutions, which could elaborate HACCP alternative systems, able to better fulfil food safety requirements and Food Business Operator needs.

Qualification of FPGA-Based Safety-Related PRM System

International Nuclear Information System (INIS)

Miyazaki, Tadashi; Oda, Naotaka; Goto, Yasushi; Hayashi, Toshifumi

2011-01-01

Toshiba has developed Non-rewritable (NRW) Field Programmable Gate Array (FPGA)-based safety-related Instrumentation and Control (I and C) system. Considering application to safety-related systems, nonvolatile and non-rewritable FPGA which is impossible to be changed after once manufactured has been adopted in Toshiba FPGA-based system. FPGA is a device which consists only of basic logic circuits, and FPGA performs defined processing which is configured by connecting the basic logic circuit inside the FPGA. FPGA-based system solves issues existing both in the conventional systems operated by analog circuits (analog-based system) and the systems operated by central processing unit (CPU-based system). The advantages of applying FPGA are to keep the long-life supply of products, improving testability (verification), and to reduce the drift which may occur in analog-based system. The system which Toshiba developed this time is Power Range Neutron Monitor (PRM). Toshiba is planning to expand application of FPGA-based technology by adopting this development process to the other safety-related systems such as RPS from now on. Toshiba developed a special design process for NRW-FPGA-based safety-related I and C systems. The design process resolves issues for many years regarding testability of the digital system for nuclear safety application. Thus, Toshiba NRW-FPGA-based safety-related I and C systems has much advantage to be a would standard of the digital systems for nuclear safety application. (author)

Problems and concerns in radiation safety management related with decommissioning of tritium facility

International Nuclear Information System (INIS)

Kawano, Takao

2005-01-01

The tritium facility at the National Institute for Fusion Science has been closed in 2002 after decommissioning procedure. A number of works have been completed including technical measures and administrative documentations to be reported to the Ministry of Education, Culture, Sport, Science and Technology. All the operations were carried out in three successive terms; 1) survey and preparations, 2) actual decommissioning works, and 3) report of all procedures to the Minister. A valuable experience we had during this project has been summarized, and some problems have also been pointed out from a viewpoint of radiation safety management. (author)

List of reports from the BMFT, CEA, EPRI, JSTA and USNRC concerning reactor safety research

International Nuclear Information System (INIS)

1981-09-01

This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning special Problems in the field of Reactor Safety Research. According to the cooperation of the Bundesminister fuer Forschung und Technologie (BMFT) with the Commissariat a l'Energie Atomique (CEA) the Japan Science and Technology Agency (JSTA) the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission these reports are available in the Gesellschaft fuer Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Saftety Research Program of the BMFT, reporting organization. The list of reports appears quarterly. (orig./HP) [de

Items to be reflected to the nuclear power safety measures in Japan (concerning the examination, design and operation management) (excluding the items to be reflected to the standards)

Energy Technology Data Exchange (ETDEWEB)

1980-10-01

In connection with the Three Mile Island nuclear power accident in March, 1979, in the United States, in order to introduce the lessons from it in the nuclear power safety regulations in Japan, 52 items to be reflected to the nuclear power safety measures were chosen by the Nuclear Safety Commission. Of these, 16 items were examined by the Committee on Examination of Reactor Safety. It was decided that these results would be introduced in the nuclear safety regulations, by the Nuclear Safety Commission. The following 16 items are described. For the examination, four items concerning the automatic operation of safety systems and others; for the design, five items concerning a small rupture accident, the monitoring of the state of primary coolant, control room layout and others; for the operation management, seven items concerning the inspection at the time of repair, the prevention of faulty handlings by operators and others.

Implementing the Comprehensive Unit-Based Safety Program (CUSP) to Improve Patient Safety in an Academic Primary Care Practice.

Science.gov (United States)

Pitts, Samantha I; Maruthur, Nisa M; Luu, Ngoc-Phuong; Curreri, Kimberly; Grimes, Renee; Nigrin, Candace; Sateia, Heather F; Sawyer, Melinda D; Pronovost, Peter J; Clark, Jeanne M; Peairs, Kimberly S

2017-11-01

While there is growing awareness of the risk of harm in ambulatory health care, most patient safety efforts have focused on the inpatient setting. The Comprehensive Unit-based Safety Program (CUSP) has been an integral part of highly successful safety efforts in inpatient settings. In 2014 CUSP was implemented in an academic primary care practice. As part of CUSP implementation, staff and clinicians underwent training on the science of safety and completed a two-question safety assessment survey to identify safety concerns in the practice. The concerns identified by team members were used to select two initial safety priorities. The impact of CUSP on safety climate and teamwork was assessed through a pre-post comparison of results on the validated Safety Attitudes Questionnaire. Ninety-six percent of staff completed science of safety training as part of CUSP implementation, and 100% of staff completed the two-question safety assessment. The most frequently identified safety concerns were related to medications (n = 11, 28.2), diagnostic testing (n = 9, 25), and communication (n = 5, 14). The CUSP team initially prioritized communication and infection control, which led to standardization of work flows within the practice. Six months following CUSP implementation, large but nonstatistically significant increases were found for the percentage of survey respondents who reported knowledge of the proper channels for questions about patient safety, felt encouraged to report safety concerns, and believed that the work setting made it easy to learn from the errors of others. CUSP is a promising tool to improve safety climate and to identify and address safety concerns within ambulatory health care. Copyright © 2017 The Joint Commission. Published by Elsevier Inc. All rights reserved.

Caffeine-based food supplements and beverages: Trends of consumption for performance purposes and safety concerns.

Science.gov (United States)

Bessada, Sílvia M F; Alves, Rita C; Oliveira, M Beatriz P P

2018-07-01

Nowadays, daily food supplementation regarding the improvement of physical and mental performance is a growing trend in sport practitioners, young students and active people. Food supplements are foodstuffs, labeled under food law and not obliged to safety assessments before their commercialization. Several products are commercialized claiming ergogenic effects as marketing strategies. Caffeine is often one of their main ingredients, as it increases both physical performance and concentration. This manuscript presents a general overview of the current caffeine-based food supplements and energy drinks available in the Portuguese market, as well as the consuming trends regarding their ergogenic effects, performance purposes, and active ingredients. Product claims, recommended daily intakes, caffeine pharmacology, and safety concerns aspects are also discussed aspects. Copyright © 2018 Elsevier Ltd. All rights reserved.

Advances in safety related maintenance

International Nuclear Information System (INIS)

2000-03-01

The maintenance of systems, structures and components in nuclear power plants (NPPs) plays an important role in assuring their safe and reliable operation. Worldwide, NPP maintenance managers are seeking to reduce overall maintenance costs while maintaining or improving the levels of safety and reliability. Thus, the issue of NPP maintenance is one of the most challenging aspects of nuclear power generation. There is a direct relation between safety and maintenance. While maintenance alone (apart from modifications) will not make a plant safer than its original design, deficient maintenance may result in either an increased number of transients and challenges to safety systems or reduced reliability and availability of safety systems. The confidence that NPP structures, systems and components will function as designed is ultimately based on programmes which monitor both their reliability and availability to perform their intended safety function. Because of this, approaches to monitor the effectiveness of maintenance are also necessary. An effective maintenance programme ensures that there is a balance between the improvement in component reliability to be achieved and the loss of component function due to maintenance downtime. This implies that the safety level of an NPP should not be adversely affected by maintenance performed during operation. The nuclear industry widely acknowledges the importance of maintenance in NPP safety and operation and therefore devotes great efforts to develop techniques, methods and tools to aid in maintenance planning, follow-up and optimization, and in assuring the effectiveness of maintenance

Items to be reflected to the nuclear power safety measures in Japan (concerning the examination, design and operation management) (excluding the items to be reflected to the standards)

International Nuclear Information System (INIS)

1980-01-01

In connection with the Three Mile Island nuclear power accident in March, 1979, in the United States, in order to introduce the lessons from it in the nuclear power safety regulations in Japan, 52 items to be reflected to the nuclear power safety measures were chosen by the Nuclear Safety Commission. Of these, 16 items were examined by the Committee on Examination of Reactor Safety. It was decided that these results would be introduced in the nuclear safety regulations, by the Nuclear Safety Commission. The following 16 items are described. For the examination, four items concerning the automatic operation of safety systems and others; for the design, five items concerning a small rupture accident, the monitoring of the state of primary coolant, control room layout and others; for the operation management, seven items concerning the inspection at the time of repair, the prevention of faulty handlings by operators and others. (J.P.N.)

THE INFLUENCE OF MEDIA EXPOSURE, SAFETY AND HEALTH CONCERNS, AND SELF-EFFICACY ON ENVIRONMENTAL ATTITUDES TOWARDS ELECTRONIC GREEN PRODUCTS

Directory of Open Access Journals (Sweden)

Iman Khalid A. Qader

2011-07-01

Full Text Available As the high-tech industry evolves at a rapid pace, vast amounts of hazardous materials are used in fuelling its global expansion. These rapid changes in production processes are significantly depleting natural resources. With the surge of popular interest and awareness pertaining to environmental issues, organisations may be in peril if consumers' attitudes towards their products are ignored. This study intends to understand consumers' environmental attitudes towards electronic green products and to identify the effect of three factors, namely, media exposure, safety and health concerns, and self- efficacy, on this attitude. Data were collected via a self-administered questionnaire among 170 respondents in a public university. The results of the study indicated that safety and health concerns as well as self-efficacy had significant positive impacts on consumers' environmental attitudes. Surprisingly, however, media exposure did not exhibit any significant influence on consumers' environmental attitude. It is recommended that campaign and awareness projects focus on safety and health issues. Additionally, media should play a more active role in increasing environmental awareness among consumers.

Current safety issues related to research reactor operation

International Nuclear Information System (INIS)

Alcala-Ruiz, F.

2000-01-01

The Agency has included activities on research reactor safety in its Programme and Budget (P and B) since its inception in 1957. Since then, these activities have traditionally been oriented to fulfil the Agency's functions and obligations. At the end of the decade of the eighties, the Agency's Research Reactor Safety Programme (RRSP) consisted of a limited number of tasks related to the preparation of safety related publications and the conduct of safety missions to research reactor facilities. It was at the beginning of the nineties when the RRSP was upgraded and expanded as a subprogramme of the Agency's P and B. This subprogramme continued including activities related to the above subjects and started addressing an increasing number of issues related to the current situation of research reactors (in operation and shut down) around the world such as reactor ageing, modifications and decommissioning. The present paper discusses some of the above issues as recognised by various external review or advisory groups (e.g., Peer Review Groups under the Agency's Performance Programme Appraisal System (PPAS) or the standing International Nuclear Safety Advisory Group (INSAG)) and the impact of their recommendations on the preparation and implementation of the part of the Agency's P and B relating to the above subject. (author)

Working Safely at Some Times and Unsafely at Others: A Typology and Within-Person Process Model of Safety-Related Work Behaviors.

Science.gov (United States)

Beus, Jeremy M; Taylor, William D

2017-06-22

Why do individuals choose to work safely in some instances and unsafely in others? Though this inherently within-person question is straightforward, the preponderance of between-person theory and research in the workplace safety literature is not equipped to answer it. Additionally, the limited way in which safety-related behaviors tend to be conceptualized further restricts understanding of why individuals vary in their safety-related actions. We use a goal-focused approach to conceptually address this question of behavioral variability and contribute to workplace safety research in 2 key ways. First, we establish an updated typology of safety-related behaviors that differentiates behaviors based on goal choice (i.e., safe vs. unsafe behaviors), goal-directedness (i.e., intentional vs. unintentional behaviors), and the means of goal pursuit (i.e., commission vs. omission and promotion vs. prevention-focused behaviors). Second, using an expectancy-value theoretical framework to explain variance in goal choice, we establish within-person propositions stating that safety-related goal choice and subsequent behaviors are a function of the target of safety-related behaviors, the instrumentality and resource requirement of behaviors, and the perceived severity, likelihood, and immediacy of the threats associated with behaviors. Taken together, we define what safety-related behaviors are, explain how they differ, and offer propositions concerning when and why they may vary within-persons. We explore potential between-person moderators of our theoretical propositions and discuss the practical implications of our typology and process model of safety-related behavior. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Surveys of research projects concerning nuclear facility safety financed by the Federal Ministry for the Environment, Nature Protection and Reactor Safety, 1991

International Nuclear Information System (INIS)

1992-09-01

Each progress report is a collection of individual reports, categorized by subject matter. They are a documentation of the contractor's progress, rendered by themselves on standardized forms, published, for the sake of general information on progress made in investigations concerning reactor safety, by the project attendance department of the GRS. The individual reports have serial numbers. Each report includes particulars of the objective, work carried out, results obtained and plans for project continuation. (orig.) [de

Surveys of research projects concerning nuclear facility safety, financed by the Federal Ministry for the Environment, Nature Protection and Reactor Safety, 1988

International Nuclear Information System (INIS)

1989-11-01

Each progress report is a collection of individual reports, categorized by subject matter. They are a documentation of the contractor's progress, rendered by themselves on standardized forms, published, for the sake of general information on progress made in investigations concerning reactor safety, by the project attendance department of the GRS. The individual reports have serial numbers. Each report includes particulars of the objective, work carried out, results obtained and plans for project continuation. (orig.) [de

Surveys of research projects concerning nuclear facility safety, financed by the Federal Ministry for the Environment, Nature Protection and Reactor Safety, 1987

International Nuclear Information System (INIS)

1988-06-01

Each progress report is a collection of individual reports, categorized by subject matter. They are a documentation of the contractor's progress, rendered by themselves on standardized forms, published, for the sake of general information on progress made in investigations concerning reactor safety, by the project attendance department of the GRS. The individual reports have serial numbers. Each report includes particulars of the objective, work carried out, results obtained and plans for project continuation. (orig.) [de

Inquiry relating to safety due to modification of usage of nuclear fuel material (establishment of waste safety testing facility) in Tokai Laboratory, Japan Atomic Energy Research Institute

International Nuclear Information System (INIS)

1979-01-01

Application was made to the director of the Science and Technology Agency (STA) for the license relating to the modification of usage of nuclear fuel material (the establishment of waste safety testing facility) from the director of the Japan Atomic Energy Research Institute on November 30, 1978. After passing through the safety evaluation in the Nuclear Safety Bureau of STA, inquiry was conducted to the head of the Atomic Energy Safety Commission (AESC) on June 6, 1979, from the director of the STA. The head of AESC directed to conduct the safety examination to the head of the Nuclear Fuel Safety Examination Specialist Committee on June 7, 1979. The content of the modification of usage of nuclear fuel material is the establishment of waste safety testing facility to study and test the safety relating to the treatment and disposal of high level radioactive liquid wastes due to the reprocessing of spent fuel. As for the results of the safety examination, the siting of the waste safety testing facility which is located in the Tokai Laboratory, Japan Atomic Energy Research Institute (JAERI), and the test plan of the glass solidification of high level radioactive liquid are presented as the outline of the study plan. The building, main equipments including six cells, the isolation room and the glove box, the storage, and the disposal facilities for gas, liquid and solid wastes are explained as the outline of the facilities. Concerning the items from the viewpoint of safety, aseismatic design, slightly vacuum operation, shielding, decay heat removal, fire protection, explosion protection, criticality management, radiation management and environmental effect were evaluated, and the safety was confirmed. (Nakai, Y.)

The Swedish Nuclear Power Inspectorate's Regulations concerning Safety in connection with the Disposal of Nuclear Material and Nuclear Waste. General Recommendations concerning the Application of the Swedish Nuclear Power Inspectorate's Regulations above

International Nuclear Information System (INIS)

2002-06-01

An english translation of the original Swedish regulations concerning the safety in disposal of nuclear wastes is published in this booklet, together with recommendations on how these regulations can be applied

New safety valve addresses environmental concerns

International Nuclear Information System (INIS)

Taylor, J.; Austin, R.

1992-01-01

This paper reports that Conoco Pipeline is using a unique relief valve to reduce costs while improving environmental protection at its facilities. Conoco Pipeline Co. Inc. began testing new relief valves in 1987 to present over-pressuring its pipelines while enhancing the safety, environmental integrity and profitability of its pipelines. Conoco worked jointly with Rupture Pin Technology Inc., Oklahoma City, to seek a solution to a series of safety, environmental, and operational risks in the transportation of crude oil and refined products through pipelines. Several of the identified problems were traced to a single equipment source: the reliability of rupture discs used at pipeline stations to relieve pressure by diverting flow to tanks during over-pressure conditions. Conoco's corporate safety and environmental policies requires solving problems that deal with exposure to hydrocarbon vapors, chemical spills or the atmospheric release of fugitive emissions, such as during rupture disc maintenance. The company had used rupture pin valves as vent relief devices in conjunction with development by Rick Austin of inert gas methods to protect the inner casing wall and outer carrier pipeline wall in pipeline road crossings. The design relies on rupture pin valves set at 5 psi to isolate vent openings from the atmosphere prior to purging the annular space between the pipeline and casing with inert gas to prevent corrosion. Speciality Pipeline Inspection and Engineering Inc., Houston, is licensed to distribute the equipment for the new cased-crossing procedure

Response to ONS/EH-OA concerns

International Nuclear Information System (INIS)

Rice, P.D.

1991-01-01

The DOE's independent Office of Nuclear Safety (ONS) conducted an independent assessment of WSRC's readiness for K-Reactor restart. DOE-ONS identified six areas of concern, with specific findings in each area. The six concerns deal with: (1) Technical Specification surveillance, (2) human factors issues, (3) emergency lighting, (4) fire protection issues, (5) the Unreviewed Safety Question process, and (6) the critique process. This report addresses each of these six concerns and Westinghouse's actions to resolve them

IAEA activities in nuclear safety: future perspectives. Spanish Nuclear Safety Council, Madrid, 28 May 1998

International Nuclear Information System (INIS)

ElBaradei, M.

1998-01-01

The document represents the conference given by the Director General of the IAEA at the Spanish Nuclear Safety Council in Madrid, on 28 May 1998, on Agency's activities in nuclear safety. The following aspects are emphasized: Agency's role in creating a legally binding nuclear safety regime, non-binding safety standards, services provided by the Agency to assist its Member States in the Application of safety standards, Agency's nuclear safety strategy, and future perspective concerning safety aspects related to radioactive wastes, residues of past nuclear activities, and security of radiological sources

IRSN safety research carried out for reviewing safety cases

International Nuclear Information System (INIS)

Serres, Ch.

2010-01-01

Christophe Serres from IRSN (France) described the independent role of the IRSN regarding research related to nuclear safety in the context of the French Planning Act of 28 June 2006 foreseeing a licence application to be submitted in 2015 for the creation of a deep geological repository. IRSN research programme is organised along research activities devoted to addressing independently-identified k ey safety issues . These 'key issues' should also be of prime concern for the implementer since they relate to the demonstration of the overall safety of the repository, and the level of funding that the implementer should afford to research activities of concern for safety. He explained that the quality and independency of the research programme carried out by IRSN allow building and improving a set of scientific knowledge and technical skills that serves the public mission of delivering technical appraisal and advice, e.g., on behalf of the national safety authority. In particular they contribute to improving the decisional process by making possible scientific dialogue with stakeholders independently from regulator or implementer. The current IRSN R and D programme is developed along the following lines: - Test the adequacy of experimental methods for which feedback is not sufficient. - Develop basic scientific knowledge in the fields where there is a need for better understanding of complex phenomena and interactions. - Develop and use numerical modelling tools to support studies on complex phenomena and interactions. - Perform specific experimental tests aiming at assessing the key parameters that may warrant the performances of the different components of the repository. These studies are carried out by means of experiments performed either at IRSN surface laboratories, or in the Tournemire Experimental Station (TES), an underground facility operated by IRSN in the south-east of France. Targeted actions on research related to operational safety and reversibility

Leadership and Management for Safety. General Safety Requirements

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factor, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations (registrants and licensees) and other organizations concerned with facilities and activities that give rise to radiation risks

RESPONSIBILITIES OF FOOD BUSINESS OPERATORS RELATED TO FOOD SAFETY: CONCERNS RELATED TO HACCP IN MICRO-BUSINESSES FOOD COMPANIES

OpenAIRE

T. Civera; D. Nucera; A. Bellio; M. Botosso; M. Mora; R. Goi; B. Griglio

2012-01-01

The research was aimed at collecting information on food safety knowledge by operators of small and less developed food businesses. This will allow to reveal what are the real drawbacks in HACCP application in these realities. Fifty meat producing plants located in Piedmont region were involved. In all the plants a questionnaire with questions on HACCP system was submitted. The analysis of the collected answers, evidenced that 42% of the operators needed to perform structural modifications in...

Awareness, Knowledge, and Concern about Age-Related Macular Degeneration

Science.gov (United States)

Cimarolli, Verena R.; Laban-Baker, Allie; Hamilton, Wanda S.; Stuen, Cynthia

2012-01-01

Age-related macular degeneration (AMD)--a common eye disease causing vision loss--can be detected early through regular eye-health examinations, and measures can be taken to prevent visual decline. Getting eye examinations requires certain levels of awareness, knowledge, and concern related to AMD. However, little is known about AMD-related…

Aviation Safety: FAA and DOD Response to Similar Safety Concerns

National Research Council Canada - National Science Library

2002-01-01

.... The Federal Aviation Administration (FAA) and the military services often face common safety issues as they oversee the operation of similar aircraft or even dissimilar aircraft that use common parts and materials...

Occupational health and safety issues among nurses in the Philippines.

Science.gov (United States)

de Castro, A B; Cabrera, Suzanne L; Gee, Gilbert C; Fujishiro, Kaori; Tagalog, Eularito A

2009-04-01

Nursing is a hazardous occupation in the United States, but little is known about workplace health and safety issues facing the nursing work force in the Philippines. In this article, work-related problems among a sample of nurses in the Philippines are described. Cross-sectional data were collected through a self-administered survey during the Philippine Nurses Association 2007 convention. Measures included four categories: work-related demographics, occupational injury/illness, reporting behavior, and safety concerns. Approximately 40% of nurses had experienced at least one injury or illness in the past year, and 80% had experienced back pain. Most who had an injury did not report it. The top ranking concerns were stress and overwork. Filipino nurses encounter considerable health and safety concerns that are similar to those encountered by nurses in other countries. Future research should examine the work organization factors that contribute to these concerns and strengthen policies to promote health and safety.

Occupational Health and Safety Issues Among Nurses in the Philippines

Science.gov (United States)

de Castro, A. B.; Cabrera, Suzanne L.; Gee, Gilbert C.; Fujishiro, Kaori; Tagalog, Eularito A.

2009-01-01

Nursing is a hazardous occupation in the United States, but little is known about workplace health and safety issues facing the nursing work force in the Philippines. In this article, work-related problems among a sample of nurses in the Philippines are described. Cross-sectional data were collected through a self-administered survey during the Philippine Nurses Association 2007 convention. Measures included four categories: work-related demographics, occupational injury/illness, reporting behavior, and safety concerns. Approximately 40% of nurses had experienced at least one injury or illness in the past year, and 80% had experienced back pain. Most who had an injury did not report it. The top ranking concerns were stress and overwork. Filipino nurses encounter considerable health and safety concerns that are similar to those encountered by nurses in other countries. Future research should examine the work organization factors that contribute to these concerns and strengthen policies to promote health and safety. PMID:19438081

Anxiety, depression, and fall-related psychological concerns in community-dwelling older people.

Science.gov (United States)

Hull, Samantha L; Kneebone, Ian I; Farquharson, Lorna

2013-12-01

Establish the association between affect and fall-related psychological concerns (fear of falling, fall-related self-efficacy, balance confidence, and outcome expectancy). A total of 205 community-dwelling older people (mean age 81, SD 7.5 years) completed the Geriatric Depression Scale-15, Geriatric Anxiety Inventory, Modified Survey of Activities and Fear of Falling, Falls-Efficacy Scale- International, Activity-Specific Balance Confidence Scale, and the Consequences of Falling Scale. Hierarchical regression models showed that anxiety was independently associated with all fall-related psychological concerns; depression was only associated with falls efficacy. Associations between fall-related psychological concerns and age, gender, accommodation,medications, self-rated physical health, falls history, mobility, and sensory aids are also discussed. This is the first study that investigates the association between affect and the four fall-related psychological concerns. Anxiety was a significant factor associated with all four, whereas depression was only associated with activity avoidance. Implications for healthcare providers are discussed. Copyright © 2013 American Association for Geriatric Psychiatry. Published by Elsevier Inc. All rights reserved.

Surveys of research projects concerning nuclear facility safety, financed by the Bundesminister des Innern. 9th annual report on SR-projects 1984

International Nuclear Information System (INIS)

1985-06-01

The FRG's Ministry of the Interior finances studies, expertises and investigations in the field of nuclear safety. The results of such work are meant to clarify questions left open concerning the execution of licensing procedures for nuclear facilities. The GRS (Reactor Safety Company) regularly provides information on the state of such studies, on the authority of the Ministry of the Interior. Each progress report is a collection of individual reports, categorized by subject matter. They are a documentation of the contractor's progress, rendered by themselves on standardized forms, published, for the sake of general information on progress made in investigations concerning reactor safety, by the project attendance department of the GRS. The individual reports have serial numbers. Each report includes particulars of the objective, work carried out, results obtained and plans for project continuation. (orig./HP) [de

Safety related terms for advanced nuclear plants

International Nuclear Information System (INIS)

1995-12-01

The terms considered in this document are in widespread current use without a universal consensus as to their meaning. Other safety related terms are already defined in national or international codes and standards as well as in IAEA's Nuclear Safety Standards Series. Most of the terms in those codes and standards have been defined and used for regulatory purposes, generally for application to present reactor designs. There is no intention to duplicate the description of such regulatory terms here, but only to clarify the terms used for advanced nuclear plants. The following terms are described in this paper: Inherent safety characteristics, passive component, active component, passive systems, active system, fail-safe, grace period, foolproof, fault-/error-tolerant, simplified safety system, transparent safety

Safety related terms for advanced nuclear plants

International Nuclear Information System (INIS)

1991-09-01

The terms considered in this document are in widespread current use without a universal consensus as to their meaning. Other safety related terms are already defined in national or international codes and standards as well as in IAEA's Nuclear Safety Standards Series. Most of the terms in those codes and standards have been defined and used for regulatory purposes, generally for application to present reactor designs. There is no intention to duplicate the description of such regulatory terms here, but only to clarify the terms used for advanced nuclear plants. The following terms are described in this paper: Inherent safety characteristics, passive component, active component, passive systems, active system, fail-safe, grace period, foolproof, fault-/error-tolerant, simplified safety system, transparent safety

Benefits of a systematic approach to maintenance for safety and safety related systems

International Nuclear Information System (INIS)

Dam, R.F.; Ayazzudin, S.; Nickerson, J.H.

2003-01-01

For safety and safety-related systems, nuclear plants have to balance the requirements of demonstrating the reliability of each system, while maintaining the system and plant availability. With the goal of demonstrating statistical reliability, these systems have extensive testing programs, which often results in system unavailability and this can impact the plant capacity. The inputs to the process are often safety and regulatory related, resulting in programs that provide a high level of scrutiny. In such cases, the value of the application of a Systematic Assessment of Maintenance (SAM) process, such as Reliability Centered Maintenance (RCM), is questioned. The special case of Standby-Safety systems was discussed in a previous paper, where it was demonstrated how SAM techniques provide useful insight into current system performance, the impact of testing on component and system reliability, and how PSA considerations can be integrated into a comprehensive Maintenance, Surveillance, and Inspection (MSI) strategy. Although the system reliability requirements are an important part of the strategy evaluation, SAM techniques provide a systematic assessment within a broader context. Testing is only one part of an overall strategy focused on ensuring that component function is maintained through a combination of monitoring technologies (including testing), predictive techniques, and intrusive maintenance strategies. Each strategy is targeted to known component degradation mechanisms. This thinking can be extended to safety and safety related systems in general. Over the past 6 years, AECL has been working with CANDU utilities in the development and implementation of a comprehensive and integrated Plant Life Management (PLiM) program. As part of developing a comprehensive plant asset management approach, SAM techniques are used to develop a technical basis that not only works towards ensuring reliable operation of plant systems, but also facilitates the optimization and

Geological disposal of radioactive waste. Safety requirements

International Nuclear Information System (INIS)

2006-01-01

This Safety Requirements publication is concerned with providing protection to people and the environment from the hazards associated with waste management activities related to disposal, i.e. hazards that could arise during the operating period and following closure. It sets out the protection objectives and criteria for geological disposal and establishes the requirements that must be met to ensure the safety of this disposal option, consistent with the established principles of safety for radioactive waste management. It is intended for use by those involved in radioactive waste management and in making decisions in relation to the development, operation and closure of geological disposal facilities, especially those concerned with the related regulatory aspects. This publication contains 1. Introduction; 2. Protection of human health and the environment; 3. The safety requirements for geological disposal; 4. Requirements for the development, operation and closure of geological disposal facilities; Appendix: Assurance of compliance with the safety objective and criteria; Annex I: Geological disposal and the principles of radioactive waste management; Annex II: Principles of radioactive waste management

The Concept of Cultural Relativity in Moral Judgments Concerning Gender-Related Issues.

Science.gov (United States)

Boyd, D. R.; And Others

The comparative study was designed to determine whether cultural relativism and ethical reasoning develop in a hierarchical manner when applied to culturally different phenomena. The phenomena investigated were moral judgments concerning gender-related issues. Thirty-six first through sixth-grade students from two private schools and 130…

Cause for Concern: A Mixed-Methods Study of Campus Safety and Security Practices in United States-Mexico Border Institutions of Higher Education

Science.gov (United States)

Holmes, Ryan Clevis

2014-01-01

Campus safety has been a source of concern since the 1990s. However, in 2007, the tragedy at the Virginia Polytechnic and State University sent a sense of alarm through many institutions of higher education. Immediately following this tragedy, institutions across the country began to evaluate and question their safety and security practices. While…

Call 4 Concern: patient and relative activated critical care outreach.

Science.gov (United States)

Odell, Mandy; Gerber, Karin; Gager, Melanie

Patients can experience unexpected deterioration in their physiological condition that can lead to critical illness, cardiac arrest, admission to the intensive care unit and death. While ward staff can identify deterioration through monitoring physiological signs, these signs can be missed, interpreted incorrectly or mismanaged. Rapid response systems using early warning scores can fail if staff do not follow protocols or do not notice or manage deterioration adequately. Nurses often notice deterioration intuitively because of their knowledge of individual patients. Patients and their relatives have the greatest knowledge of patients, and can often pick up subtle signs physiological deterioration before this is identified by staff or monitoring systems. However, this ability has been largely overlooked. Call 4 Concern (C4C) is a scheme where patients and relatives can call critical care teams directly if they are concerned about a patient's condition- it is believed to be the first of its kind in the UK. A C4C feasibility project ran for six months, covering patients being transferred from the intensive care unit to general wards. C4C has the potential to prevent clinical deterioration and is valued by patients and relatives. Concerns of ward staff could be managed through project management. As it is relatively new, this field offers further opportunities for research.

Risk communication activities toward nuclear safety in Tokai: your safety is our safety

International Nuclear Information System (INIS)

Tsuchiya, T.

2007-01-01

As several decades have passed since the construction of nuclear power plants began, residents have become gradually less interested in nuclear safety. The Tokai criticality accident in 1909, however, had roused residents in Tokai-Mura to realize that they live with nuclear technology risks. To prepare a field of risk communication, the Tokai-Mura C 3 project began as a pilot research project supported by NISA. Alter the project ended, we are continuing risk. communication activities as a non-profit organisation. The most important activity of C 3 project is the citizen's inspection programme for nuclear related facilities. This programme was decided by participants who voluntarily applied to the project. The concept of the citizen's inspection programme is 'not the usual facility tours'. Participants are involved from the planning stage and continue to communicate with workers of the inspected nuclear facility. Since 2003, we have conducted six programmes for five nuclear related organisations. Participants evaluated that radiation protection measures were near good but there were some problems concerning the worker's safety and safety culture, and proposed a mixture of advice based on personal experience. Some advice was accepted and it did improve the facility's safety measures. Other suggestions were not agreed upon by nuclear organisations. The reason lies in the difference of concept between the nuclear expert's 'safety' and the citizen's 'safety'. Residents do not worry about radiation only, but also about the facility's safety as a whole including the worker's safety. They say, 'If the workers are not safe, you also are unable to protect us'. Although the disagreement remained, the participants and the nuclear industry learned much about each other. Participating citizens received a substantial amount of knowledge about the nuclear industry and its safety measures, and feel the credibility and openness of the nuclear industry. On the other hand, the nuclear

Quality Control Activities Related to Mechanical Maintenance of Safety Related Components at Krsko NPP

International Nuclear Information System (INIS)

Djakovic, D.

2016-01-01

For successful, safe and reliable operation of nuclear power plant, maintenance processes have to be systematically controlled and procedures for quality control of maintenance activities shall be established. This is requested by the quality assurance program, which shall provide control over activities affecting the quality of structures, systems, and components, considering their importance to safety. As a part of Quality and Nuclear Oversight Division (QNOD; SKV), the Quality Control Department (QC) provides quality control activities, which are deeply involved in maintenance processes at Krsko NPP, both on safety related and non-safety related (non-nuclear safety) components. QC activities on safety related components have to fulfil all requirements, which will enable the components to perform their intended safety functions. This paper describes quality control activities related to mechanical maintenance of safety related components at Krsko NPP and significant role of the Krsko plant QC Department in three particular maintenance cases connected with safety related components. In these three specific cases, the QC has confirmed its importance in compliance with quality assurance program and presented its significant added value in providing safe and reliable operation of the plant. The first maintenance activity was installation of nozzle check valves in the scope of a modification for improving regulation of spent fuel pit pumps. The QC Department performed receipt inspection of the valves. Using non-destructive examination methods and X-ray spectrometry, it was found out that the valve diffuser was made of improper material, which could cause progressive corrosion of the valve diffuser in borated water and consequently a loss of safety function of the valves followed by long-term consequences. The second one was the receipt inspection of containment ventilation fan coolers. The coolers were claimed and sent back to the supplier because the QC Department

Structural safety - Is the safety margin measurable

International Nuclear Information System (INIS)

Rintamaa, R.

1992-01-01

In ensuring the structural safety of the nuclear components one must be aware of the uncertainties related to the material deorientation, loadings and other operational conditions, geometrical dimensions as well as the service environment. Furthermore, the validation of the analysis tools and procedures is of great importance in overall safety assessment of a pressure retaining component. In order to identify and quantify the concerns and risks arising from the uncertainties in the safety related issue intensive research is being carried out all over the world, in particular, on the ageing, plant life extension and management of old nuclear power plants. The presentation includes a general survey of the factors relevant to the assessment of safe and reliable operation of a nuclear component throughout its planned service life. Certain aspects are outlined based on the research work being carried out at the Technical Research Centre of Finland (VTT)(orig.)

College Rampage Renews School Safety Concerns

Science.gov (United States)

Maxwell, Lesli A.

2007-01-01

Coming just four days before the anniversary of the Columbine school shootings, the mass slayings by a student gunman at Virginia Polytechnic Institute last week revived vexing questions and raised familiar fears for educators across the country who grapple daily with ensuring the safety of their students and staffs. The April 16 killings provoked…

Application of life-cycle information for advancement in safety of nuclear fuel cycle facilities. Application of safety information to advanced safety management support system

International Nuclear Information System (INIS)

Suzuki, Kazuhiko; Ishida, Michihiko

2005-08-01

Risk management is major concern to nuclear energy reprocessing plants to improve plant and process reliability and ensure their safety. This is because we are required to predict potential risks before any accident or disaster occurs. The advancement of safety design and safety systems technologies showed large amount of useful safety-related knowledge that can be of great importance to plant operation to reduce operation risks and ensure safety. This research proposes safety knowledge modeling framework on the basis of ontology technologies to systematically construct plant knowledge model, which includes plant structure, operation, and the associated behaviors. In such plant knowledge model safety related information is defined and linked to the different elements of plant knowledge model. Ontology editor is employed to define the basic concepts and their inter-relations, which are used to capture and construct plant safety knowledge. In order to provide detailed safety knowledgebase, HAZOP results are analyzed and structured so that safety-related knowledge are identified and structured within the plant knowledgebase. The target safety knowledgebase includes: failures, deviations, causes, consequences, and fault propagation as mapped to plant knowledge. The proposed ontology-based safety framework is applied on case study nuclear plant to structure failures, causes, consequences, and fault propagation, which are used to support plant operation. (author)

Improving safety culture through the health and safety organization: a case study.

Science.gov (United States)

Nielsen, Kent J

2014-02-01

International research indicates that internal health and safety organizations (HSO) and health and safety committees (HSC) do not have the intended impact on companies' safety performance. The aim of this case study at an industrial plant was to test whether the HSO can improve company safety culture by creating more and better safety-related interactions both within the HSO and between HSO members and the shop-floor. A quasi-experimental single case study design based on action research with both quantitative and qualitative measures was used. Based on baseline mapping of safety culture and the efficiency of the HSO three developmental processes were started aimed at the HSC, the whole HSO, and the safety representatives, respectively. Results at follow-up indicated a marked improvement in HSO performance, interaction patterns concerning safety, safety culture indicators, and a changed trend in injury rates. These improvements are interpreted as cultural change because an organizational double-loop learning process leading to modification of the basic assumptions could be identified. The study provides evidence that the HSO can improve company safety culture by focusing on safety-related interactions. © 2013. Published by Elsevier Ltd and National Safety Council.

Categorization of safety related motor operated valve safety significance for Ulchin Unit 3

International Nuclear Information System (INIS)

Kang, D. I.; Kim, K. Y.

2002-03-01

We performed a categorization of safety related Motor Operated Valve (MOV) safety significance for Ulchin Unit 3. The safety evaluation of MOV of domestic nuclear power plants affects the generic data used for the quantification of MOV common cause failure ( CCF) events in Ulchin Units 3 PSA. Therefore, in this study, we re-estimated the MGL(Multiple Greek Letter) parameter used for the evaluation of MOV CCF probabilities in Ulchin Units 3 Probabilistic Safety Assessment (PSA) and performed a classification of the MOV safety significance. The re-estimation results of the MGL parameter show that its value is decreased by 30% compared with the current value in Ulchin Unit 3 PSA. The categorization results of MOV safety significance using the changed value of MGL parameter shows that the number of HSSCs(High Safety Significant Components) is decreased by 54.5% compared with those using the current value of it in Ulchin Units 3 PSA

Posiva's application for a decision in principle concerning a disposal facility for spent nuclear fuel. STUK's statement and preliminary safety appraisal

Energy Technology Data Exchange (ETDEWEB)

Ruokola, E. [ed.

2000-03-01

In May 1999, Posiva Ltd submitted to the Government an application, pursuant to the Nuclear Energy Act, for a Decision in Principle on a disposal facility for spent nuclear fuel from the Finnish nuclear power plants. The Ministry of Trade and Industry requested the Radiation and Nuclear Safety Authority (STUK) to draw up a preliminary safety appraisal concerning the proposed disposal facility. In the beginning of this report, STUK's statement to the Ministry and Industry concerning the proposed disposal facility is given. In that statement, STUK concludes that the Decision in Principle is currently justified from the standpoint of safety. The statement is followed by a safety appraisal, where STUK deems, how the proposed disposal concept, site and facility comply with the safety requirements included in the Government's Decision (478/1999). STUK's preliminary safety appraisal was supported by contributions from a number of outside experts. A collective opinion by an international group of ten distinguished experts is appended to this report. (orig.)

Addressing employee concerns about welding in a nuclear power plant

International Nuclear Information System (INIS)

Danko, J.C.; Hansen, D.D.; O'Leary, P.D.

1988-01-01

A leading utility contracted with EG and G Idaho to perform a comprehensive, independent evaluation of the utility's welding program with respect to the safety-related welds made at one of its nuclear power plants. The purpose of this paper is to review a number of the employee concerns and the technical basis for the disposition of these concerns. In addition, recommendations are presented that may help to prevent the recurrence of employee concerns in future nuclear power plant construction, and thereby costly delays may be avoided and welding productivity and quality improved

India's power program and its concern over environmental safety

International Nuclear Information System (INIS)

Prasad, G.E.; Mittra, J.

2001-01-01

India's need of electrical power is enormous and per capita consumption of power is to be increased at least by ten times to reach the level of world average. Thermal Power generation faces two fold problems. First, there is scarcity of good quality fuel and second, increasing environmental pollution. India's self reliant, three stage, 'closed-fuel-cycle' nuclear power program is promising better solution to the above problems. To ensure Radiation Protection and Safety of Radiation Sources, Indian Nuclear Power program emphasizes upon design and engineering safety by incorporating necessary safety features in the design, operational safety through structured training program and typically through software packages to handle rare unsafe events and regulation by complying safety directives. A health survey among the radiation workers indicates that there is no extra threat to the public from nuclear power program. Based on latest technology, as available in case of nuclear power option, it is quite possible to meet high energy requirement with least impact on the environment.. (authors)

Standards: An international framework for nuclear safety

International Nuclear Information System (INIS)

Versteeg, J.

2000-01-01

The IAEA, uniquely among international organizations concerned with the use of radiation, radioactive materials and nuclear energy, has statutory functions to establish safety standards and to provide for their application in Member States. The IAEA also contributes towards another major element of the 'global safety culture', namely the establishment of legally binding international agreements on safety related issues. (author)

Leadership and Management for Safety. General Safety Requirements (Arabic Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Chinese Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (French Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Spanish Edition)

International Nuclear Information System (INIS)

2017-01-01

his Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Surveys of research projects concerning nuclear facility safety, financed by the Federal Ministry of the Interior

International Nuclear Information System (INIS)

1986-05-01

Each progress report is a collection of individual reports, categorized by subject matter. They are a documentation of the contractor's progress, rendered by themselves on standardized forms, published, for the sake of general information on progress made in investigations concerning reactor safety, by the project attendance department of the GRS. The individual reports have serial numbers. Each report includes particulars of the objective, work carried out, results obtained and plans for project continuation. (orig./HP) [de

Safety campaigns. TIS Launches New Safety Information Campaign

CERN Multimedia

2001-01-01

Need to start a new installation and worried about safety aspects? Or are you newly responsible for safety matters in a CERN building? Perhaps you're simply interested in how to make the working environment safer for yourself and your colleagues. Whatever the case, a new information campaign launched by TIS this week can help. The most visible aspects of the new campaign will be posters distributed around the Laboratory treating a different subject each month. The Web site - http://safety.cern.ch/ - which provides all safety related information. But these are not the only aspects of the new campaign. Members of the TIS/GS group, whose contact details can be found on the safety web site, are available to give information and advice on a one-to-one basis at any time. The campaign's launch has been timed to coincide with European Safety Week, organized by the European Agency for Safety and Health at Work and the subject treated in the first posters is safety inspection. This particular topic only concerns thos...

Cross-cultural variation in disease-related concerns among patients with inflammatory bowel disease.

Science.gov (United States)

Levenstein, S; Li, Z; Almer, S; Barbosa, A; Marquis, P; Moser, G; Sperber, A; Toner, B; Drossman, D A

2001-06-01

The aim of this work was to study cross-cultural variations in the impact of inflammatory bowel disease (IBD) on health-related quality of life by an international comparison of disease-related concerns. Item and factor scores on the Rating Form of Inflammatory Bowel Disease Patient Concerns and overall mean concern levels were compared by analysis of variance among 2002 IBD patients in eight countries. The overall level of concern varied from 51 out of 100 in Portugal to 19 in Sweden, with intermediate scores for Italy (43), Canada (40), United States (39), France (39), Austria (33), and Israel (25). Having surgery, an ostomy, the uncertain nature of the disease, and medication side effects were each rated among the first five in importance in six countries. Other items varied considerably. For example, concern regarding pain and suffering was high in Israel and low in Portugal, whereas concern over developing cancer was low in Italy. Concern over financial issues and access to high-quality health care were inversely associated with measures of national economic prosperity. 1) Cross-cultural comparisons of patient concerns related to IBD are feasible using translated scales. 2) Reporting tendencies vary greatly; within Europe, patients from southern countries report greater overall concern. 3) The complications and the variable evolution of disease elicit general concern, but the importance of specific issues varies among countries. 4) The reasons for national differences may have social, cultural, and/or economic determinants with relevance to the patient-physician relationship, patient education, and therapeutic decision making.

India's power programs and its concern over environmental safety

International Nuclear Information System (INIS)

Prasad, G.E.; Mittra, J.; Sarma, M.S.R.

2000-01-01

India's need for electrical power is enormous and per capita consumption of power is to be increased at least by 10 times to reach the level of the world average. Thermal power generation faces two-fold problems. First, there is scarcity of good quality fuel and second, increasing environmental pollution. India 's self reliant, . three stage, 'closed-fuel-cycle' nuclear power program is promising a better solution to the above problems. To ensure Radiation Protection and Safety of Radiation Sources, the Indian Nuclear Power program emphasizes upon design and engineering safety by incorporating' necessary safety features in the design, operational safety through a structured training program and typically through software packages to handle rare unsafe events and regulation by complying safety directives. A health survey among the radiation workers indicates that there is no extra threat to the public from the nuclear power program. Based on the latest technology, as available in case of the nuclear power option, it is quite possible to meet high energy requirements with least impact on the environment. (authors)

Assessing propensity to learn from safety-related events

NARCIS (Netherlands)

Drupsteen, L.; Wybo, J.L.

2015-01-01

Most organisations aim to use experience from the past to improve safety, for instance through learning from safety-related incidents and accidents. Whether an organisation is able to learn successfully can however only be determined afterwards. So far, there are no proactive measures to assess

Collection of laws and ordinances concerning regulation of atomic energy, 1989 edition. 1989 ed.

International Nuclear Information System (INIS)

1989-01-01

The collection of the laws and ordinances concerning the regulation of atomic energy, 1989 edition, was published by the Nuclear Safety Bureau, Science and Technology Agency. First, the abbreviated expressions of 56 laws and ordinances are shown. The contents are divided into Part 1: Fundamental laws and ordinances, Part 2: Regulation of nuclear source materials, nuclear fuel materials and nuclear reactors, Part 3: Prevention of radiation injuries due to radioactive isotopes and others, and Part 4: Related laws and ordinances. In Part 1, Atomic Energy Fundamental Act, Act of Institution of Atomic Energy Commission and Nuclear Safety Commission of Japan, Law Concerning the Technical Standard for Prevention of Radiation Injuries and 9 others are included. In Part 2, Law Concerning Regulation of Nuclear Source Materials, Nuclear Fuel Materials and Nuclear Reactors and 45 others are included. In Part 3, Law Concerning Prevention of Radiation Injuries Due to Radioisotopes and Others and 25 others are included. In Part 4, Electricity Enterprises Act, Road Transport and Vehicles Act, Ships' Safety Law, Labor Safety and Hygiene Law, Japan Atomic Energy Research Institute Law and 29 others are included. The contents are those as of November 30, 1988. (Kako, I.)

Ayurveda formulations: A roadmap to address the safety concerns

Directory of Open Access Journals (Sweden)

Kishor Patwardhan

2017-10-01

Full Text Available It is a matter of serious concern that the number of case reports pointing at a possible association between the clinical toxicity and the use of Ayurveda formulations is increasing significantly over the years in scientific medical literature. Though most of these cases are connected with the presence of heavy metals such as lead, mercury and arsenic in these formulations, there are also reports suggesting toxicity due to the presence of toxic chemicals of herbal origin. In the year 2008, the Government of India took an initiative of establishing the National Pharmacovigilance Programme for Ayurveda, Siddha and Unani drugs in a structured way. However, due to lack of sustained support, this program has now become defunct. This issue is of vital importance and needs to be addressed effectively on a priority basis. In this communication, we propose the following crucial policy interventions to be introduced at different levels: a. Amendments to Drug and Cosmetic Act, b. Issuing consumer guidelines, c. Issuing prescription guidelines, d. Issuing clinical monitoring guidelines, e. Implementation of good manufacturing guidelines, f. Promoting documentation of clinical safety, g. Identifying the sources of contamination, and, h. Provision for stringent punishment. If these policy interventions are taken up and implemented, a significant positive change in the scenario can be expected in the near future.

Environmental contaminants of emerging concern in seafood - European database on contaminant levels

DEFF Research Database (Denmark)

Vandermeersch, Griet; Lourenço, Helena Maria; Alvarez-Muñoz, Diana

2015-01-01

Marine pollution gives rise to concern not only about the environment itself but also about the impact on food safety and consequently on public health. European authorities and consumers have therefore become increasingly worried about the transfer of contaminants from the marine environment...... to seafood.So-called "contaminants of emerging concern" are chemical substances for which no maximum levels have been laid down in EU legislation, or substances for which maximum levels have been provided but which require revision. Adequate information on their presence in seafood is often lacking and thus...... potential risks cannot be excluded. Assessment of food safety issues related to these contaminants has thus become urgent and imperative. A database (www.ecsafeseafooddbase.eu), containing available information on the levels of contaminants of emerging concern in seafood and providing the most recent data...

Food Safety Concerns and other Factors Affecting Iran’s Pistachio Exports to EU, Australia, and Japan

OpenAIRE

Ashktorab, Niloofar; Saghaian, Sayed Hossein; Shahnoushi, Naser

2013-01-01

In this paper, the impact of food safety concerns on Iran’s pistachio export demand was investigated. Panel data and panel cointegration analyses were used to estimate the export demand function of Iran’s pistachio nuts to the European Union (EU), Japan, and Australia for the period of 1997 to 2006 so that the relationship between factors affecting Iran’s pistachio exports can be examined. The results show the existence of long-run relationships among the variables that have a significant imp...

Progress report concerning safety research for nuclear reactor facilities

International Nuclear Information System (INIS)

1978-01-01

Examination and evaluation of safety research results for nuclear reactor facilities have been performed, as more than a year has elapsed since the plan had been initiated in April, 1976, by the special sub-committee for the safety of nuclear reactor facilities. The research is carried out by being divided roughly into 7 items, and seems to be steadily proceeding, though it does not yet reach the target. The above 7 items include researches for (1) criticality accident, (2) loss of coolant accident, (3) safety for light water reactor fuel, (4) construction safety for reactor facilities, (5) reduction of release of radioactive material, (6) safety evaluation based on the probability theory for reactor facilities, and (7) aseismatic measures for reactor facilities. With discussions on the progress and the results of the research this time, research on the behaviour on fuel in abnormal transients including in-core and out-core experiments has been added to the third item, deleting the power-cooling mismatch experiment in Nuclear Safety Research Reactor of JAERI. Also it has been decided to add two research to the seventh item, namely measured data collection, classification and analysis, and probability assessment of failures due to an earthquake. For these 7 items, the report describes the concrete contents of research to be performed in fiscal years of 1977 and 1978, by discussing on most rational and suitable contents conceivable at present. (Wakatsuki, Y.)

Progress of nuclear safety research. 2001

Energy Technology Data Exchange (ETDEWEB)

Anoda, Yoshinari; Sasajima, Hideo; Nishiyama, Yutaka (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

2001-10-01

JAERI is conducting nuclear safety research primarily at the Nuclear Safety Research Center in close cooperation with the related departments in accordance with the Long Term Plan for Development and Utilization of Nuclear Energy or the Safety Research Annual Plan issued by the Japanese government. The safety research at JAERI concerns the engineering safety of nuclear power plants and nuclear fuel cycle facilities, and radioactive waste management as well as advanced technology for safety improvement or assessment. Also, JAERI has conducted international collaboration to share the information on common global issues of nuclear safety. This report summarizes the nuclear safety research activities of JAERI from April 1999 through March 2001. (author)

Dysmorphic concern is related to delusional proneness and negative affect in a community sample.

Science.gov (United States)

Keating, Charlotte; Thomas, Neil; Stephens, Jessie; Castle, David J; Rossell, Susan L

2016-06-30

Body image concerns are common in the general population and in some mental illnesses reach pathological levels. We investigated whether dysmorphic concern with appearance (a preoccupation with minor or imagined defects in appearance) is explained by psychotic processes in a community sample. In a cross-sectional design, two hundred and twenty six participants completed an online survey battery including: The Dysmorphic Concern Questionnaire; the Peters Delusional inventory; the Aberrant Salience Inventory; and the Depression, Anxiety, Stress Scale. Participants were native English speakers residing in Australia. Dysmorphic concern was positively correlated with delusional proneness, aberrant salience and negative emotion. Regression established that negative emotion and delusional proneness predicted dysmorphic concern, whereas, aberrant salience did not. Although delusional proneness was related to body dysmorphia, there was no evidence that it was related to aberrant salience. Understanding the contribution of other psychosis processes, and other health related variables to the severity of dysmorphic concern will be a focus of future research. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

77 FR 6411 - Training, Qualification, and Oversight for Safety-Related Railroad Employees

Science.gov (United States)

2012-02-07

... Oversight for Safety-Related Railroad Employees AGENCY: Federal Railroad Administration (FRA), Department of... establishing minimum training standards for each category and subcategory of safety-related railroad employee... or contractor that employs one or more safety-related railroad employee to develop and submit a...

Safety-related operator actions: methodology for developing criteria

International Nuclear Information System (INIS)

Kozinsky, E.J.; Gray, L.H.; Beare, A.N.; Barks, D.B.; Gomer, F.E.

1984-03-01

This report presents a methodology for developing criteria for design evaluation of safety-related actions by nuclear power plant reactor operators, and identifies a supporting data base. It is the eleventh and final NUREG/CR Report on the Safety-Related Operator Actions Program, conducted by Oak Ridge National Laboratory for the US Nuclear Regulatory Commission. The operator performance data were developed from training simulator experiments involving operator responses to simulated scenarios of plant disturbances; from field data on events with similar scenarios; and from task analytic data. A conceptual model to integrate the data was developed and a computer simulation of the model was run, using the SAINT modeling language. Proposed is a quantitative predictive model of operator performance, the Operator Personnel Performance Simulation (OPPS) Model, driven by task requirements, information presentation, and system dynamics. The model output, a probability distribution of predicted time to correctly complete safety-related operator actions, provides data for objective evaluation of quantitative design criteria

Predictors of Likelihood of Speaking Up about Safety Concerns in Labour and Delivery

Science.gov (United States)

Lyndon, Audrey; Sexton, J. Bryan; Simpson, Kathleen Rice; Rosenstein, Alan; Lee, Kathryn A.; Wachter, Robert M.

2011-01-01

Background Despite widespread emphasis on promoting “assertive communication” by caregivers as essential to patient safety improvement efforts, fairly little is known about when and how clinicians speak up to address safety concerns. In this cross-sectional study we use a new measure of speaking up to begin exploring this issue in maternity care. Methods We developed a scenario-based measure of clinician’s assessment of potential harm and likelihood of speaking up in response to perceived harm. We embedded this scale in a survey with measures of safety climate, teamwork climate, disruptive behaviour, work stress, and personality traits of bravery and assertiveness. The survey was distributed to all registered nurses and obstetricians practicing in two US Labour & Delivery units. Results The response rate was 54% (125 of 230 potential respondents). Respondents were experienced clinicians (13.7 ± 11 years in specialty). Higher perception of harm, respondent role, specialty experience, and site predicted likelihood of speaking up when controlling for bravery and assertiveness. Physicians rated potential harm in common clinical scenarios lower than nurses did (7.5 vs. 8.4 on 2–10 scale; p<0.001). Some participants (12%) indicated they were unlikely to speak up despite perceiving high potential for harm in certain situations. Discussion This exploratory study found nurses and physicians differed in their harm ratings, and harm rating was a predictor of speaking up. This may partially explain persistent discrepancies between physicians and nurses in teamwork climate scores. Differing assessments of potential harms inherent in everyday practice may be a target for teamwork intervention in maternity care. PMID:22927492

Subcontracting relations and their effects on safety and security in two firms: SNCF and GrDF

International Nuclear Information System (INIS)

Ponnet, Marie

2011-01-01

Because of economical processes that tend to move the frontiers of firms salaried relations of uncertain status are found coexisting inside the very same working world. From a qualitative investigation mixing employees' interviews and observations made on SNCF and GrDF working sites our research offers to think about the relations linking subcontracting, maintenance, safety and security. Considering subcontracting as a particular way for professional bodies to be associated allows us to wonder about its effects within a same firm (the 'integrated' subcontracting) as much as between a principal and a provider. Our thesis shows that when change occurs inside the organization - like the creation of new committees of experts or the reorganizing of an old service - security and safety can be impacted because thus professional bodies tend to be reconfigured while modifications affect practices, professional identities and work division. The relations between subcontractors and principal are complicated and their consequences depend from the context they are placed in, determined by a combination of various characteristics such as the confidence level, the available time, the reputation, the position occupied by the subcontractor. Our investigation makes clear that there is no direct link between subcontracting, security and safety. Their effects, in spite of their reality, are submitted to the altering mediation of legal factors (related to economic national and European issues) and concern the working organization as well as the professional identities. (author)

Safety related events at nuclear installations in 1995

DEFF Research Database (Denmark)

Korsbech, Uffe C C

1996-01-01

Nuclear safety related events of significance at least corresponding to level 2 of the International Nuclear Event Scale are described. In 1995 only two events occured at nuclear power plants, and four events occured at plants using ionizing radiation for processing or research.......Nuclear safety related events of significance at least corresponding to level 2 of the International Nuclear Event Scale are described. In 1995 only two events occured at nuclear power plants, and four events occured at plants using ionizing radiation for processing or research....

New Automated System Available for Reporting Safety Concerns | Poster

Science.gov (United States)

A new system has been developed for reporting safety issues in the workplace. The Environment, Health, and Safety’s (EHS’) Safety Inspection and Issue Management System (SIIMS) is an online resource where any employee can report a problem or issue, said Siobhan Tierney, program manager at EHS.

On the Issue of Regional Policy in the Sphere of Ecological Safety (Based on the Documents Concerning the Republic of Kalmykia

Directory of Open Access Journals (Sweden)

Elza I. Mantaeva

2018-03-01

Full Text Available The regional government should provide ecological safety in order to ensure stable social and economic development of the country. The article outlines theoretical approach and recommendations on practice concerning ecological issues, investigates state policy aiming to preserve nature and analyses sources of threat to ecological safety in the region. The modern paradigm of the country’s and region’s development is characterized by the combination of ecological and economic policy. The ecological policy providing measures for efficient use of natural resources, their protection and restoration is implemented in the economic strategy of highly developed countries and encourages stable social and economic development of the country and the region. Some researchers assert that Russia’s most regions do not possess sufficient resources necessary to implement structural shifts which can eliminate the main threats to ecological safety. The Republic of Kalmykia can be included into this list. It is rich in natural resources but they are not restored due to the lack of regulation for efficient consumption. The main concerns of the republic are water supply, desertification, and pollution of atmosphere, waste disposal, and protection of wildlife and environment, preservation of hunting ground, forest management. The republic generates no electricity so it is delivered by neighboring regions. The republic should use the renewable ways of producing energy which can contribute to the energy and ecological safety and can attract new investment funds. There is an urgent need for stricter state regulation to ensure socioeconomic development and ecological safety in Kalmykia.

Some Subjects and Relations According to the Act about Safety at Work

Directory of Open Access Journals (Sweden)

Marino Đ. Učur

2015-01-01

Full Text Available Complex relations in the field of safety at work could not be present without the subjects which have a specific status and specific rights, obligations and responsibilities regulated by the Occupational Health and Safety Act. This paper deals with: employer’s designated employee for the implementation of occupational health and safety activities, employees’ elected representative for health and safety protection at work, occupational medicine specialist, occupational health and safety specialist and the committee for safety at work in the relations of safety at work.

Elevator and Escalator Safety Education for Older Adults.

Science.gov (United States)

Hanks, Roma Stovall

1996-01-01

In eight focus groups in five cities, older adults identified their concerns about safety on elevators and escalators, often related to misunderstanding of the equipment. Their preferences for delivery of safety information included video/television, pamphlets, discussions, and posters. Educational interventions and modifications for disabilities…

Providers' perceptions of parental concerns about HPV vaccination.

Science.gov (United States)

Perkins, Rebecca B; Clark, Jack A

2013-05-01

Parental resistance is often posited to explain low rates of human papillomavirus (HPV) vaccine uptake. We sought to describe providers' perceptions of parents' attitudes towards HPV vaccination. Thirty-four providers from four federally qualified community health centers participated in semi-structured interviews related to their experiences discussing HPV vaccination with low-income and minority parents. Providers found that parents were eager to prevent cancer in their daughters. Safety concerns and feeling that vaccination was unnecessary for virgins were reasons for declining vaccination. Providers found that immigrants from low-resource settings were more receptive to HPV vaccination than White middle-class parents due both to personal experience with vaccine-preventable diseases and cervical cancer and more realistic impressions of their children's sexual activity. Immigrants from low-resource settings may be particularly receptive to HPV vaccination, while White middle-class parents may be more likely to defer vaccination due to concerns about safety or sexual issues.

"Against the silence": Development and first results of a patient survey to assess experiences of safety-related events in hospital

Directory of Open Access Journals (Sweden)

Schwappach David LB

2008-03-01

Full Text Available Abstract Background Involvement of patients in the detection and prevention of safety related events and medical errors have been widely recommended. However, it has also been questioned whether patients at large are willing and able to identify safety-related events in their care. The aim of this study was to develop and pilot test a brief patient safety survey applicable to inpatient care in Swiss hospitals. Methods A survey instrument was developed in an iterative procedure. The instrument asks patients to report whether they have experienced specific undesirable events during their hospital stay. The preliminary version was developed together with experts and tested in focus groups with patients. The adapted survey instrument was pilot-tested in random samples of patients of two Swiss hospitals (n = 400. Responders to the survey that had reported experience of any incident were sampled for qualitative interviews (n = 18. Based on the interview, the researcher classified the reported incidents as confirmed or discarded. Results The survey was generally well accepted in the focus groups and interviews. In the quantitative pilot test, 125 patients returned the survey (response rate: 31%. The mean age of responders was 55 years (range 17–91, SD 18 years and 62.5% were female. The 125 participating patients reported 94 "definitive" and 34 "uncertain" events. 14% of the patients rated any of the experienced events as "serious". The definitive and uncertain events reported with highest frequency were phlebitis, missing hand hygiene, allergic drug reaction, unavailability of documents, and infection. 23% of patients reported some or serious concerns about their safety. The qualitative interviews indicate that both, the extent of patients' uncertainty in the classification of events and the likelihood of confirmation by the interviewer vary very much by type of incident. Unexpectedly, many patients reported problems and incidents related to food

Production of neutrons in particle accelerators: a PNRI safety concern

International Nuclear Information System (INIS)

Garcia, Corazon M.; Cayabo, Lynette B.; Artificio, Thelma P.; Melendez, Johnylen V.; Piquero, Myrna E.; Parami, Vangeline K.

2002-09-01

In the safety assessment made for the first cyclotron facility in the Philippines, that is the cyclotron in the P.E.T. (Positron Emission Tomography) center of the St. Luke's Medical Center, the concern on the production of neutrons associated with the operation of particle accelerators has been identified. This takes into consideration the principles in the operation of particle accelerators and the associated production of neutrons resulting from their operation, the hazards and risks in their operation. The Bureau of Health Devices and Technology (BHDT) of the Department of Health in the Philippines regulates and controls the presently existing six (6) linear accelerators distributed in different hospitals in the country, being classified as x-ray producing devices. From the results of this study, it is evident that the production of neutrons from the operation of accelerators, produces neutrons and that activation due to neutrons can form radioactive materials. The PNRI (Philippine Nuclear Research Institute) being mandated by law to regulate and control any equipment or devices producing or utilizing radioactive materials should take the proper steps to subject all accelerator facilities and devices in the Philippines such as linear accelerators under its regulatory control in the same manner as it did with the first cyclotron in the country. (Author)

European consumers and beef safety

DEFF Research Database (Denmark)

Van Wezemael, Lynn; Verbeke, Wim; Kügler, Jens Oliver

2010-01-01

European beef consumption has been gradually declining during the past decades, while consumers' concerns about beef safety have increased. This paper explores consumer perceptions of and interest in beef safety and beef safety information, and their role in beef safety assessment and the beef...... consumption decision making process. Eight focus group discussions were performed with a total of 65 beef consumers in four European countries. Content analysis revealed that European consumers experienced difficulties in the assessment of the safety of beef and beef products and adopted diverging uncertainty...... reduction strategies. These include the use of colour, labels, brands and indications of origin as cues signalling beef safety. In general, consumer trust in beef safety was relatively high, despite distrust in particular actors....

International relations

International Nuclear Information System (INIS)

Anon.

2008-01-01

Concerning international relations, the different meetings in the field of nuclear safety are reported (Western european nuclear regulator association or Wenra, Nea, IAEA, northern dimension environmental partnership or N.D.E.P., nuclear safety and security group or N.S.S.G., international nuclear regulators association or I.N.R.A.). (N.C.)

Regulatory overview report 2013 concerning nuclear safety in Swiss nuclear installations

International Nuclear Information System (INIS)

2014-06-01

The Swiss Federal Nuclear Safety Inspectorate (ENSI) acting as the regulatory body of the Swiss Federation assesses and monitors nuclear facilities in Switzerland: these include five nuclear power plants, the interim storage facilities based at each plant, the Central Interim Storage Facility (ZWILAG) at Wuerenlingen together with the nuclear facilities at the Paul Scherrer Institute (PSI) and the two universities of Basel and Lausanne. Using a combination of inspections, regulatory meetings, examinations and analyses together with reports from the licensees of individual facilities, ENSI obtains the overview required concerning nuclear safety. It ensures that the facilities comply with regulations. Its regulatory responsibilities include the transport of radioactive materials from and to nuclear facilities and the preparations for a deep geological repository for nuclear waste. ENSI maintains its own emergency organisation, an integral part of the national emergency structure. It provides the public with information on particular events in nuclear facilities. This Surveillance Report describes operational experience, systems technology, radiological protection and management in all the nuclear facilities. Generic issues relevant to all facilities such as probabilistic safety analyses are described. In 2013, the five nuclear power plants in Switzerland (Beznau Units 1 and 2, Muehleberg, Goesgen and Leibstadt) were all operated safely and had complied with their approved operating conditions. The nuclear safety at all plants was rated as being good. 34 events were reported. During operation, no reactor scrams were recorded. On the INES scale, ranging from 0-7, ENSI rated all reportable events as Level 0. The ENSI safety evaluation reflects both reportable events and the results of the approximately 460 inspections conducted during 2013. ZWILAG consists of several storage halls, a conditioning plant and a plasma plant. At the end of 2013, the cask storage hall

Social Captial and Relative Income Concerns: Evidence from 26 Countries

OpenAIRE

Fischer, Justina A. V.; Torgler, Benno

2007-01-01

Research evidence on the impact of relative income position on individuals’ attitudes and behaviour is sorely lacking. Therefore, using the International Social Survey Programme 1998 data from 26 countries this paper investigates the impact of relative income on 14 measurements of social capital. We find support for a considerable deleterious positional concern effect of persons below the reference income. This effect is more sizeable by far than the beneficial impact of a relative income a...

78 FR 29392 - Embedded Digital Devices in Safety-Related Systems, Systems Important to Safety, and Items Relied...

Science.gov (United States)

2013-05-20

... NUCLEAR REGULATORY COMMISSION [NRC-2013-0098] Embedded Digital Devices in Safety-Related Systems, Systems Important to Safety, and Items Relied on for Safety AGENCY: Nuclear Regulatory Commission. ACTION... (NRC) is issuing for public comment Draft Regulatory Issue Summary (RIS) 2013-XX, ``Embedded Digital...

Safety-related instrumentation and control systems for nuclear power plants

International Nuclear Information System (INIS)

1984-01-01

This Safety Guide deals mainly with design requirements for those I and C systems that are important to safety but are not safety systems. The Guide is intended to expand paragraphs 3.1, 3.2 and 3.3 of the Code of Practice on Design for Safety of Nuclear Power Plants (IAEA Safety Series No.50-C-D) in the area of I and C systems important to safety and refers to them as safety-related I and C systems. It also gives guidance and enumerates requirements for multiplexing and the use of the digital computers employed in this area

An analysis of electronic health record-related patient safety incidents.

Science.gov (United States)

Palojoki, Sari; Mäkelä, Matti; Lehtonen, Lasse; Saranto, Kaija

2017-06-01

The aim of this study was to analyse electronic health record-related patient safety incidents in the patient safety incident reporting database in fully digital hospitals in Finland. We compare Finnish data to similar international data and discuss their content with regard to the literature. We analysed the types of electronic health record-related patient safety incidents that occurred at 23 hospitals during a 2-year period. A procedure of taxonomy mapping served to allow comparisons. This study represents a rare examination of patient safety risks in a fully digital environment. The proportion of electronic health record-related incidents was markedly higher in our study than in previous studies with similar data. Human-computer interaction problems were the most frequently reported. The results show the possibility of error arising from the complex interaction between clinicians and computers.

Perceptions of Safety Among LGBTQ People Following the 2016 Pulse Nightclub Shooting.

Science.gov (United States)

Stults, Christopher B; Kupprat, Sandra A; Krause, Kristen D; Kapadia, Farzana; Halkitis, Perry N

2017-09-01

The goals of this manuscript are two-fold. First, we provide a brief reaction to this journal's "Special Section: Reflections on the Orlando Massacre on its First Anniversary." Second, we present findings from a study on perceptions of safety among LGBTQ individuals following the Pulse shooting. These issues are discussed within the historical context of hate crimes experienced by the LGBTQ population (Herek), media coverage following the shooting (Hancock & Halderman), and the immediate reaction of LGBTQ graduate students to the event (Jackson). Our study sought to examine differences in perceptions of personal and peer safety by race/ethnicity, gender identity, and sexual orientation among a large, diverse sample of LGBTQ people. Findings from our study indicate that there were differences in perceptions of personal safety by gender identity, and differences in perceptions of peer safety by gender identity and sexual orientation. These findings also suggest that subgroups of the LGBTQ community with more marginalized gender and sexual identities (e.g., female, transgender, genderqueer, bisexual, queer respondents) perceived more concerns related to safety, on average, than subgroups with relatively more privilege (e.g., gay, male). Elevated safety concern may exacerbate multiple minority stress burden, a known driver of poor health outcomes among LGBTQ people. These findings are a call to action to healthcare providers to be well informed and trained to provide the appropriate care and counseling referrals that can address the safety-related concerns of LGBTQ individuals in the aftermath of identity-related attacks.

Knowledge, experience & attitudes concerning electroconvulsive therapy among patients & their relatives

OpenAIRE

Rajagopal, R.; Chakrabarti, S.; Grover, S.; Khehra, N.

2012-01-01

Background & objectives: Electroconvulsive therapy (ECT) is used frequently in developing countries, but investigations of patients’ awareness and perception of ECT are rare. The present study thus attempted a comprehensive examination of knowledge, experience and attitudes concerning ECT among patients treated with brief-pulse, bilateral, modified ECT, and their relatives. Methods: Of the 153 recipients of ECT, 77 patients and relatives were eventually assessed using questionnaires designed ...

The use of diacetyl (2,3-butanedione) and related flavoring substances as flavorings added to foods-Workplace safety issues.

Science.gov (United States)

Hallagan, John B

2017-08-01

In 2001, staff of the National Institute of Occupational Safety and Health (NIOSH) identified diacetyl (2,3-butanedione) as a "marker" of exposure in a microwave popcorn manufacturing facility in which workers developed severe respiratory illness. Subsequent investigations identified additional workers in food and flavor manufacturing facilities also with severe respiratory illness. The flavor industry, NIOSH, and federal and state regulators conducted significant programs to address workplace safety concerns related to the manufacture of flavors and foods containing added flavors. These programs, initiated in 2001, continue today. Key to the success of these programs is understanding what flavors added to foods are and how they are manufactured, how they are incorporated into foods, the specific characteristics of diacetyl and related flavoring substances, and what actions may be taken to assure the safest workplaces possible. Copyright © 2017 Elsevier B.V. All rights reserved.

Food safety challenges associated with traditional foods of Turkey

Directory of Open Access Journals (Sweden)

Arzu CAGRI-MEHMETOGLU

Full Text Available Abstract Consumer food safety concerns are continually increasing in Turkey, with consumer demand for safer foods becoming an important challenge for the industry. Most traditional foods in Turkey are produced under different requirements, and food safety risk management and risk assessment are conducted primarily by the government. Based on risk assessment, safety regulations and standards for traditional foods (e.g. Turkish white cheese, doner, helva have been established. In this paper, safety concerns surrounding the commercialization of traditional Turkish foods and related studies to identify and minimize potential hazards are discussed along with pathogen contamination in raw meat balls and aflatoxin in helva and white cheese. Based on this review, additional national risk analysis experts and related databases are urgently needed. In addition, the manufacturing processes for traditional foods need to be standardized and harmonized with international standards, such as CODEX.

Geological disposal of nuclear waste: II. From laboratory data to the safety analysis – Addressing societal concerns

International Nuclear Information System (INIS)

Grambow, Bernd; Bretesché, Sophie

2014-01-01

Highlights: • Models for repository safety can only partly be validated. • Long term risks need to be translated in the context of societal temporalities. • Social sciences need to be more strongly involved into safety assessment. - Abstract: After more than 30 years of international research and development, there is a broad technical consensus that geologic disposal of highly-radioactive waste will provide for the safety of humankind and the environment, now, and far into the future. Safety analyses have demonstrated that the risk, as measured by exposure to radiation, will be of little consequence. Still, there is not yet an operating geologic repository for highly-radioactive waste, and there remains substantial public concern about the long-term safety of geologic disposal. In these two linked papers, we argue for a stronger connection between the scientific data (paper I, Grambow et al., 2014) and the safety analysis, particularly in the context of societal expectations (paper II). In this paper (II), we assess the meaning of the technical results and derived models (paper I) for the determination of the long-term safety of a repository. We consider issues of model validity and their credibility in the context of a much broader historical, epistemological and societal context. Safety analysis is treated in its social and temporal dimensions. This perspective provides new insights into the societal dimension of scenarios and risk analysis. Surprisingly, there is certainly no direct link between increased scientific understanding and a public position for or against different strategies of nuclear waste disposal. This is not due to the public being poorly informed, but rather due to cultural cognition of expertise and historical and cultural perception of hazards to regions selected to host a geologic repository. The societal and cultural dimension does not diminish the role of science, as scientific results become even more important in distinguishing

Health and safety of the older worker.

Science.gov (United States)

Farrow, A; Reynolds, F

2012-01-01

In the UK, increasing numbers of paid employees are over 60 years with further increases expected as the state pension age rises. Some concern surrounds possible increased work-related illness and accidents for people working beyond the age of 60. To identify the available evidence for health and safety risks of workers over age 60 years with respect to factors associated with injuries and accidents. Databases searched included PUBMED, OSHUpdate, National Institute for Occupational Safety and Health (NIOSHTIC-2), SafetyLit, the UK The Health and Safety Executive (HSELINE) and the Canadian Centre for Occupational Health and Safety until December 2009. Inclusion criteria were workers aged over 60 years. Findings were grouped into occupational accidents and injuries and individual and workplace factors that may have influenced risk of injury to the over-60s. Very little direct evidence was found concerning safety practices and health risks of workers over age 60. Some safety risks were associated with specific physical declines such as age-related hearing loss. Overall, these workers had fewer accidents and injuries but these were more likely to be serious or fatal when they occurred. There was no strong evidence that work patterns, including shift work or overtime, affected safety. Protective, compensatory strategies or experience may maintain safe working practices. Implications for health and safety risks cannot be assessed without longitudinal research on workforces with substantial numbers of workers over age 60 in order to address the healthy worker effect.

Effectively managing public concerns about immunization safety

Directory of Open Access Journals (Sweden)

2002-01-01

Full Text Available Los beneficios de la vacunación frente a las enfermedades prevenibles de este modo son muy superiores a sus mínimos riesgos. Con el fin de mantener o fortalecer los programas nacionales de vacunación, los trabajadores de todos los niveles de la salud pública deberían recibir formación sobre los temas relacionados con la vacunación y estar preparados para responder a las dudas planteadas por el público. Una respuesta rápida y franca a los temores del público acerca de las vacunas podría garantizar la integridad de los programas de vacunación en todo el continente americano, según el documento "Directrices para enfrentarse a los temores sobre la seguridad de las vacunaciones" (Guidelines for Managing Immunization Safety Concerns, elaborado por la División de Vacunas e Inmunización de la Organización Panamericana de la Salud (OPS y resumido aquí. Todo acontecimiento médico que se considere posiblemente relacionado con una vacuna debe ser investigado en el ámbito local. Si su distribución temporal y los síntomas respaldan la sospecha de que pueda estar relacionado con una vacuna, se debe iniciar una investigación más formal y, una vez finalizada, el acontecimiento debe ser clasificado en una de las cuatro categorías siguientes: 1 relacionado con el programa, 2 relacionado con la vacuna, 3 no relacionado, o 4 desconocido (investigación no concluyente. Dependiendo de la categoría a la que haya sido asignado el acontecimiento, las acciones posteriores pueden consistir en tranquilizar a los padres, a los cuidadores y a otros adultos; comunicarse con el público y con otros trabajadores de la salud; instaurar tratamiento; corregir los errores del programa, como pueden ser la manipulación de la vacuna, su almacenamiento, su administration o los problemas relacionados con la jeringuilla; comentar con los fabricantes problemas relacionados con la calidad y eficacia de la vacuna; retirar la vacuna del mercado, o iniciar nuevas

Nuclear safety in Slovak Republic. Status of safety improvements

International Nuclear Information System (INIS)

Toth, A.

1999-01-01

Status of the safety improvements at Bohunice V-1 units concerning WWER-440/V-230 design upgrading were as follows: supplementing of steam generator super-emergency feed water system; higher capacity of emergency core cooling system; supplementing of automatic links between primary and secondary circuit systems; higher level of secondary system automation. The goal of the modernization program for Bohunice V-1 units WWER-440/V-230 was to increase nuclear safety to the level of the proposals and IAEA recommendations and to reach probability goals of the reactor concerning active zone damage, leak of radioactive materials, failures of safety systems and damage shields. Upgrading program for Mochovce NPP - WWER-440/V-213 is concerned with improving the integrity of the reactor pressure vessel, steam generators 'leak before break' methods applied for the NPP, instrumentation and control of safety systems, diagnostic systems, replacement of in-core monitoring system, emergency analyses, pressurizers safety relief valves, hydrogen removal system, seismic evaluations, non-destructive testing, fire protection. Implementation of quality assurance has a special role in improvement of operational safety activities as well as safety management and safety culture, radiation protection, decommissioning and waste management and training. The Year 2000 problem is mentioned as well

Practicing industrial safety - issues involved

International Nuclear Information System (INIS)

Gunasekaran, P.

2016-01-01

Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

Relation between water chemistry and operational safety

International Nuclear Information System (INIS)

Oliveira, M.F. de.

1991-01-01

This report describes the relation between chemistry/radiochemistry and operational safety, the technics bases for chemical and radiochemical parameters and an analysis of the Annual Report of Angra I Operation and OSRAT Mission report to 1989 in this area too. Furthermore it contains the transcription of the technical Specifications related to the chemistry and radiochemistry for Angra I. (author)

Definitions of engineered safety features and related features for nuclear power plants

International Nuclear Information System (INIS)

1986-01-01

In light water moderated, light water cooled nuclear power plants, definitions are given of engineered safety features which are designed to suppress or prevent dispersion of radioactive materials due to damage etc. of fuel at the times of power plant failures, and of related features which are designed to actuate or operate the engineered safety features. Contents are the following: scope of engineered safety features and of related features; classification of engineered safety features (direct systems and indirect systems) and of related features (auxiliaries, emergency power supply, and protective means). (Mori, K.)

The specific tasks of RF TSO - FSUE VO 'Safety', related with Implementation of obligations under the Convention on Nuclear Safety

International Nuclear Information System (INIS)

Potapov, V.; Kuznetsov, M.; Kapralov, E.

2010-01-01

It was more than 20 years ago that IAEA discussed the issue pertaining to the need in scientific and engineering support to the regulatory body. The Convention on Nuclear Safety being the keystone in assurance of the global nuclear safety and security regime was adopted in 1994. It is pointed out that two independent organizations supervised by Rostechnadzor have been established within the Russian TSO system, FSUE VO 'Safety' being one of them. The tasks of the organization comprise obligatory certification of equipment as well as acceptance of equipment before its delivery to the NPP both in Russia and in the countries constructing the power units based on the Russian designs. The acceptance procedure has been set forth in the new Russian document at the level of the federal rules and regulations for nuclear safety assurance. As far as its implementation decision is concerned, a task for selection and training of personnel has been set and allocated on the Training and Methodological Center of Nuclear and Radiation Safety established with the support of FSUE VO 'Safety', which provides training programmes and specific lecture courses in the wide range of the relevant topics. (author)

Definitive closure of nuclear power plants. Aspects concerning physical safety

International Nuclear Information System (INIS)

Rodriguez, C.; Puntarulo, L.; Canibano, J.

1988-01-01

This paper analyzes the various safety requirements that must be fulfilled by nuclear power plants for their operation without restrictions, such as safeguards, nuclear safety and physical protection. Physical protection, the subject most extensively dealt by the authors, is defined as safety measures aimed at providing protection against deliberate hostile deeds, such as robberies or non-authorized transport of radioactive materials or sabotage in nuclear facilities, performed either by individuals or by groups of individuals. (Author)

Ethical considerations and proposed guidelines for the use of radio frequency identification: especially concerning its use for promoting public safety and national security.

Science.gov (United States)

Anderson, Amber McKee; Labay, Vladimir

2006-04-01

Radio Frequency Identification (RFID) is quickly growing in its applications. A variety of uses for the technology are beginning to be developed, including chips which can be used in identification cards, in individual items, and for human applications, allowing a chip to be embedded under the skin. Such chips could provide numerous benefits ranging from day-to-day convenience to the increased ability of the federal government to adequately ensure the safety of its citizens. However, there are also valid concerns about the potential of this technology to infringe on privacy, creating fears of a surveillance society. These are concerns that must be addressed quickly, with sensitivity to individual interests and societal welfare, allowing humanity to reap the benefits of convenience and safety without paying an unacceptable price in the loss of privacy.

Considerations concerning the reliability of reactor safety equipment

International Nuclear Information System (INIS)

Furet, J.; Guyot, Ch.

1967-01-01

A review is made of the circumstances which favor a good collection of maintenance data at the C.E.A. The large amount of data to be treated has made necessary the use of a computer for analyzing automatically the results collected. Here, only particular aspects of the reliability from the point of view of the electronics used for nuclear reactor control will be dealt with: sale and unsafe failures; probability of survival (in the case of reactor safety); availability. The general diagrams of the safety assemblies which have been drawn up for two types of reactor (power reactor and low power experimental reactor) are given. Results are presented of reliability analysis which could be applied to the use of functional modular elements, developed industrially in France. Improvement of this reliability appears to be fairly limited by an increase in the redundancy; on the other hand it is shown how it may be very markedly improved by the use of automatic tests with different frequencies for detecting unsafe failures rates of measurements for the sub-assemblies and for the logic sub-assemblies. Finally examples are given to show the incidence of the complexity and of the use of different technologies in reactor safety equipment on the reliability. (authors) [fr

What price safety. A probabilistic cost-benefit evaluaton of existing engineered safety features

International Nuclear Information System (INIS)

O'Donnell, E.P.

1978-01-01

The paper provides a method for performing quantitative cost-benefit evaluations for nuclear safety concerns involving accidents of low probability and potentially large consequences. It presents an application of the method to ECCS, containment, emergency power system and hydrogen recombiner system. This evaluation provides a valuable assessment of the relative cost effectiveness of these features in reducing accident risk. It also provides insight into the sensitivity of cost-benefit calculations to the manner in which safety features are sequantially added in design. (author)

Nuclear safety regulation on nuclear safety equipment activities in relation to human and organizational factors

International Nuclear Information System (INIS)

Li Tianshu

2013-01-01

Based on years of knowledge in nuclear safety supervision and experience of investigating and dealing with violation events in repair welding of DFHM, this paper analyzes major faults in manufacturing and maintaining activities of nuclear safety equipment in relation to human and organizational factors. It could be deducted that human and organizational factors has definitely become key features in the development of nuclear energy and technology. Some feasible measures to reinforce supervision on nuclear safety equipment activities have also been proposed. (author)

Using Active Learning to Identify Health Information Technology Related Patient Safety Events.

Science.gov (United States)

Fong, Allan; Howe, Jessica L; Adams, Katharine T; Ratwani, Raj M

2017-01-18

The widespread adoption of health information technology (HIT) has led to new patient safety hazards that are often difficult to identify. Patient safety event reports, which are self-reported descriptions of safety hazards, provide one view of potential HIT-related safety events. However, identifying HIT-related reports can be challenging as they are often categorized under other more predominate clinical categories. This challenge of identifying HIT-related reports is exacerbated by the increasing number and complexity of reports which pose challenges to human annotators that must manually review reports. In this paper, we apply active learning techniques to support classification of patient safety event reports as HIT-related. We evaluated different strategies and demonstrated a 30% increase in average precision of a confirmatory sampling strategy over a baseline no active learning approach after 10 learning iterations.

Imbuing medical professionalism in relation to safety: a study protocol for a mixed-methods intervention focused on trialling an embedded learning approach that centres on the use of a custom designed board game.

LENUS (Irish Health Repository)

Ward, Marie

2017-07-17

Healthcare organisations have a responsibility for ensuring that the governance of workplace settings creates a culture that supports good professional practice. Encouraging such a culture needs to start from an understanding of the factors that make it difficult for health professionals to raise issues of concern in relation to patient safety. The focus of this study is to determine whether a customised education intervention, developed as part of the study, with interns and senior house officers (SHOs) can imbue a culture of medical professionalism in relation to patient safety and support junior doctors to raise issues of concern, while shaping a culture of responsiveness and learning.

Work-related driver safety: A multi-level investigation

OpenAIRE

AMANDA ROSE WARMERDAM

2017-01-01

This program of research explored the organisational determinants of work-related road traffic injury in light vehicle fleets. The landscape of risk management in workplace road safety in Australia and organisational practices that influence safe driver behaviour were investigated. Key findings included that safe driving is influenced by factors at multiple levels, including senior managers, supervisors and individual fleet drivers and workplace road safety is not well integrated within curre...

Comparative analysis of safety related site characteristics

International Nuclear Information System (INIS)

Andersson, Johan

2010-12-01

This document presents a comparative analysis of site characteristics related to long-term safety for the two candidate sites for a final repository for spent nuclear fuel in Forsmark (municipality of Oesthammar) and in Laxemar (municipality of Oskarshamn) from the point of view of site selection. The analyses are based on the updated site descriptions of Forsmark /SKB 2008a/ and Laxemar /SKB 2009a/, together with associated updated repository layouts and designs /SKB 2008b and SKB 2009b/. The basis for the comparison is thus two equally and thoroughly assessed sites. However, the analyses presented here are focussed on differences between the sites rather than evaluating them in absolute terms. The document serves as a basis for the site selection, from the perspective of long-term safety, in SKB's application for a final repository. A full evaluation of safety is made for a repository at the selected site in the safety assessment SR-Site /SKB 2011/, referred to as SR-Site main report in the following

Comparative analysis of safety related site characteristics

Energy Technology Data Exchange (ETDEWEB)

Andersson, Johan (ed.)

2010-12-15

This document presents a comparative analysis of site characteristics related to long-term safety for the two candidate sites for a final repository for spent nuclear fuel in Forsmark (municipality of Oesthammar) and in Laxemar (municipality of Oskarshamn) from the point of view of site selection. The analyses are based on the updated site descriptions of Forsmark /SKB 2008a/ and Laxemar /SKB 2009a/, together with associated updated repository layouts and designs /SKB 2008b and SKB 2009b/. The basis for the comparison is thus two equally and thoroughly assessed sites. However, the analyses presented here are focussed on differences between the sites rather than evaluating them in absolute terms. The document serves as a basis for the site selection, from the perspective of long-term safety, in SKB's application for a final repository. A full evaluation of safety is made for a repository at the selected site in the safety assessment SR-Site /SKB 2011/, referred to as SR-Site main report in the following

Effects of safety climate on safety norm violations: exploring the mediating role of attitudinal ambivalence toward personal protective equipment.

Science.gov (United States)

Cavazza, Nicoletta; Serpe, Alessandra

2009-01-01

Research on the role of organizational and psychosocial factors in influencing risk behaviors and the likelihood of injury at work showed that safety climate also has great impact on workers' behavior. However, the mechanisms through which this impact operates are still partially unclear. In order to explore the role that attitudinal ambivalence toward wearing PPE might play in mediating the impact of safety climate on safety norm violations, a questionnaire was administered to 345 Italian workers. Three dimensions of safety climate (i.e., company safety concern, senior managers' safety concern, supervisors' attitudes towards safety) were found to be positively associated with the individual ambivalence level, whereas the fourth one (i.e., work pressure) was negatively correlated with it. In turn, low levels of ambivalence were associated with a lower tendency to break the safety norms, even though the perception of a good safety climate also maintained a direct effect on unsafe behaviors. Designers of training program for the prevention of work related injuries must pay great attention to the psycho-social factors (such as the effects of the safety climate perception by employees on their attitudes and behaviors), and include specific contents into the prevention programs in order to improve workers compliance with safety norms.

Resistance ability evaluation of safety-related structures for the simulated aircraft accident

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Jin; Kim, Sung Woon; Choi, Jang Kyu [Daewoo E and C Co., Ltd., Suwon (Korea, Republic of)] (and others)

2003-03-15

Aircraft accidents on nuclear safety-related structures can cause severe damage to the safety of NPP(Nuclear Power Plant)s. To assess the safety of nuclear safety-related structures, the local damage and the dynamic response of global structures should be investigated together. This study have compared several local damage assessment formulas suggested for aircraft as an impactor, and have set the assessment system of local damage for impact-proof design of NPP containment buildings. And the local damage of nuclear safety-related structures in operation in Korea for commercial aircraft as impactor have been estimated. Impact load-time functions of the aircraft crash have been decided to assessment the safety of nuclear safety-related structures against the intentional colliding of commercial aircraft. Boeing 747 and Boeing 767 is selected as target aircraft based on the operation frequencies and weights. Comparison of the fire analysis methods showed that the method considering heat convection and radiation is adequate for the temperature analysis of the aircraft fuel fire. Finally, the study covered the analysis of the major structural drawings and design drawings with which three-dimensional finite element model analysis is expected to be performed.

Software FMEA analysis for safety-related application software

International Nuclear Information System (INIS)

Park, Gee-Yong; Kim, Dong Hoon; Lee, Dong Young

2014-01-01

Highlights: • We develop a modified FMEA analysis suited for applying to software architecture. • A template for failure modes on a specific software language is established. • A detailed-level software FMEA analysis on nuclear safety software is presented. - Abstract: A method of a software safety analysis is described in this paper for safety-related application software. The target software system is a software code installed at an Automatic Test and Interface Processor (ATIP) in a digital reactor protection system (DRPS). For the ATIP software safety analysis, at first, an overall safety or hazard analysis is performed over the software architecture and modules, and then a detailed safety analysis based on the software FMEA (Failure Modes and Effect Analysis) method is applied to the ATIP program. For an efficient analysis, the software FMEA analysis is carried out based on the so-called failure-mode template extracted from the function blocks used in the function block diagram (FBD) for the ATIP software. The software safety analysis by the software FMEA analysis, being applied to the ATIP software code, which has been integrated and passed through a very rigorous system test procedure, is proven to be able to provide very valuable results (i.e., software defects) that could not be identified during various system tests

Safety assessments and public concern for genetically modified food products: the American view.

Science.gov (United States)

Harlander, Susan K

2002-01-01

In the relatively short time since their commercial introduction in 1996, genetically modified (GM) crops have been rapidly adopted in the United States GM crops are regulated through a coordinated framework developed in 1992 and administered by three agencies-the US Department of Agriculture (USDA) that ensures the products are safe to grow, the Environmental Protection Agency (EPA) that ensures the products are safe for the environment, and the Food and Drug Administration (FDA) that ensures the products are safe to eat. Rigorous food and environmental safety assessments must be completed before GM crops can be commercialized. Fifty-one products have been reviewed by the FDA, including several varieties of corn, soybeans, canola, cotton, rice, sugar beets, potatoes, tomatoes, squash, papaya, and flax. Because FDA considers these crops "substantially equivalent" to their conventional counterparts, no special labeling is required for GM crops in the United States and they are managed as commodities with no segregation or identity preservation. GM crops have thus made their way through commodity distribution channels into thousands of ingredients used in processed foods. It has been estimated that 70% to 85% of processed foods on supermarket shelves in the United States today contain one or more ingredients potentially derived from GM crops. The food industry and retail industry have been monitoring the opinions of their consumers on the GM issue for the past several years. Numerous independent groups have also surveyed consumer concerns about GM foods. The results of these surveys are shared and discussed here.

Reliability of containment and safety-related structures

International Nuclear Information System (INIS)

Nessim, M.A.

1995-09-01

A research program on Reliability of Containment and Safety-related Structures has been developed and is described in this document. This program is designed to support AECB's regulatory activities aimed at ensuring the safety of these structures. These activities include evaluating submissions by operators and requesting special assessments when necessary. The results of the proposed research will also be useful in revising and enhancing the CSA design standards for containment and safety-related structures. The process of developing the research program started with an information collection and review phase. The sources of information included C-FER's previous work in the area, various recent research publications, regulatory documents and relevant design standards, and a detailed discussion with AECB staff. The second step was to outline the process of reliability evaluation, and identify the required models and parameters. Comparison between the required and available information was used to identify gaps in the state-of-the-art, and the research program was designed to fill these gaps. The program is organized in four major topics, namely: development of an approach for reliability analysis; compilation and development of the required analysis tools; application to specific problems related to design, assessment, maintenance and testing of structures; and testing and validation. It is suggested that the program should be supported by an on-going process of communication and consultation between AECB staff and industry experts. This will lend credibility to the results and facilitate their future application. (author). 1 fig

Blanket safety by GEMSAFE methodology

International Nuclear Information System (INIS)

Sawada, Tetsuo; Saito, Masaki

2001-01-01

General Methodology of Safety Analysis and Evaluation for Fusion Energy Systems (GEMSAFE) has been applied to a number of fusion system designs, such as R-tokamak, Fusion Experimental Reactor (FER), and the International Thermonuclear Experimental Reactor (ITER) designs in the both stages of Conceptual Design Activities (CDA) and Engineering Design Activities (EDA). Though the major objective of GEMSAFE is to reasonably select design basis events (DBEs) it is also useful to elucidate related safety functions as well as requirements to ensure its safety. In this paper, we apply the methodology to fusion systems with future tritium breeding blankets and make clear which points of the system should be of concern from safety ensuring point of view. In this context, we have obtained five DBEs that are related to the blanket system. We have also clarified the safety functions required to prevent accident propagations initiated by those blanket-specific DBEs. The outline of the methodology is also reviewed. (author)

Descriptions and models of safety functions - a prestudy

International Nuclear Information System (INIS)

Harms-Ringdahl, L.

1999-09-01

A study has been made with the focus on different theories and applications concerning 'safety functions' and 'barriers'. In this report, a safety function is defined as a technical or organisational function with the aim to reduce probability and/or consequences associated with a hazard. The study contains a limited review of practice and theories related to safety, with a focus on applications from nuclear and industrial safety. The study is based on a literature review and interviews. A summary has been made of definitions and terminology, which shows a large variation. E.g. 'barrier' can have a precise physical and technical meaning, or it can include human, technical and organisational elements. Only a few theoretical models describing safety functions have been found. One section of the report summarises problems related to safety issues and procedures. They concern errors in procedure design and user compliance. A proposal for describing and structuring safety functions has been made. Dimensions in a description could be degree of abstraction, systems level, the different parts of the function, etc. A model for safety functions has been proposed, which includes the division of a safety function in a number connected 'safety function elements'. One conclusion is that there is a potential for improving theories and tools for safety work and procedures. Safety function could be a useful concept in such a development, and advantages and disadvantages with this is discussed. If further work should be done, it is recommended that this is made as a combination of theoretical analysis and case studies

Development of 4S and related technologies. (3) Statistical evaluation of safety performance of 4S on ULOF event

International Nuclear Information System (INIS)

Ishii, Kyoko; Matsumiya, Hisato; Horie, Hideki; Miyagi, Kazumi

2009-01-01

The purpose of this work is to evaluate quantitatively and statistically the safety performance of Super-Safe, Small, and Simple reactor (4S) by analyzing with ARGO code, a plant dynamics code for a sodium-cooled fast reactor. In this evaluation, an Anticipated Transient Without Scram (ATWS) is assumed, and an Unprotected Loss of Flow (ULOF) event is selected as a typical ATWS case. After a metric concerned with safety design is defined as performance factor a Phenomena Identification Ranking Table (PIRT) is produced in order to select the plausible phenomena that affect the metric. Then a sensitivity analysis is performed for the parameters related to the selected plausible phenomena. Finally the metric is evaluated with statistical methods whether it satisfies the given safety acceptance criteria. The result is as follows: The Cumulative Damage Fraction (CDF) for the cladding is defined as a metric, and the statistical estimation of the one-sided upper tolerance limit of 95 percent probability at a 95 percent confidence level in CDF is within the safety acceptance criterion; CDF < 0.1. The result shows that the 4S safety performance is acceptable in the ULOF event. (author)

Climate and climate-related issues for the safety assessment SR-Can

International Nuclear Information System (INIS)

Naeslund, Jens-Ove

2006-11-01

The purpose of this report is to document current scientific knowledge of the climate-related conditions and processes relevant to the long-term safety of a KBS-3 repository to a level required for an adequate treatment in the safety assessment SR-Can. The report also includes a concise background description of the climate system. The report includes three main chapters: A description of the climate system (Chapter 2); Identification and discussion of climate-related issues (Chapter 3); and, A description of the evolution of climate-related conditions for the safety assessment (Chapter 4). Chapter 2 includes an overview of present knowledge of the Earth climate system and the climate conditions that can be expected to occur in Sweden on a 100,000 year time perspective. Based on this, climate-related issues relevant for the long-term safety of a KBS-3 repository are identified. These are documented in Chapter 3 'Climate-related issues' to a level required for an adequate treatment in the safety assessment. Finally, in Chapter 4, 'Evolution of climate-related conditions for the safety assessment' an evolution for a 120,000 year period is presented, including discussions of identified climate-related issues of importance for repository safety. The documentation is from a scientific point of view not exhaustive, since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of a safety assessment. As further described in the SR-Can Main Report and in the Features Events and Processes report, the content of the present report has been audited by comparison with FEP databases compiled in other assessment projects. This report follows as far as possible the template for documentation of processes regarded as internal to the repository system. However, the term processes is not used in this report, instead the term issue has been used. Each issue includes a set of processes together resulting in the behaviour of a

Climate and climate-related issues for the safety assessment SR-Can

Energy Technology Data Exchange (ETDEWEB)

Naeslund, Jens-Ove (comp.)

2006-11-15

The purpose of this report is to document current scientific knowledge of the climate-related conditions and processes relevant to the long-term safety of a KBS-3 repository to a level required for an adequate treatment in the safety assessment SR-Can. The report also includes a concise background description of the climate system. The report includes three main chapters: A description of the climate system (Chapter 2); Identification and discussion of climate-related issues (Chapter 3); and, A description of the evolution of climate-related conditions for the safety assessment (Chapter 4). Chapter 2 includes an overview of present knowledge of the Earth climate system and the climate conditions that can be expected to occur in Sweden on a 100,000 year time perspective. Based on this, climate-related issues relevant for the long-term safety of a KBS-3 repository are identified. These are documented in Chapter 3 'Climate-related issues' to a level required for an adequate treatment in the safety assessment. Finally, in Chapter 4, 'Evolution of climate-related conditions for the safety assessment' an evolution for a 120,000 year period is presented, including discussions of identified climate-related issues of importance for repository safety. The documentation is from a scientific point of view not exhaustive, since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of a safety assessment. As further described in the SR-Can Main Report and in the Features Events and Processes report, the content of the present report has been audited by comparison with FEP databases compiled in other assessment projects. This report follows as far as possible the template for documentation of processes regarded as internal to the repository system. However, the term processes is not used in this report, instead the term issue has been used. Each issue includes a set of processes together resulting in the

Fundamentals of a graded approach to safety-related equipment setpoints

International Nuclear Information System (INIS)

Woodruff, B.A.; Cash, J.S. Jr.; Bockhorst, R.M.

1993-01-01

The concept of using a graded approach to reconstitute instrument setpoints associated with safety-related equipment was first presented to the industry by the U.S. Nuclear Regulatory Commission during the 1992 ISA/POWID Symposium in Kansas City, Missouri. The graded approach establishes that the manner in which a utility analyzes and documents setpoints is related to each setpoint's relative importance to safety. This allows a utility to develop separate requirements for setpoints of varying levels of safety significance. A graded approach to setpoints is a viable strategy that minimizes extraneous effort expended in resolving difficult issues that arise when formal setpoint methodology is applied blindly to all setpoints. Close examination of setpoint methodology reveals that the application of a graded approach is fundamentally dependent on the analytical basis of each individual setpoint

Safety-related incidents at the Finnish nuclear power plants

International Nuclear Information System (INIS)

Lehtinen, P.

1986-03-01

This report contains detailed descriptions of operating incidents and other safety-related matters at the Finnish nuclear power plants regarded as significant by the regulatory authority, the Finnish Centre for Radiation and Nuclear Safety. In this connection, an account is given of the practical actions caused by the incidents, and their significance to reactor safety is evaluated. The main features of the incidents are also described in the general Quartely Reports, Operation of Finnish Nuclear Power Plants, which are supplemented by this report intended for experts. (author)

Safety-related incidents at the Finnish nuclear power plants

International Nuclear Information System (INIS)

Lehtinen, P.

1985-01-01

This report contains detailed descriptions of operating incidents and other safety-related matters at the Finnish nuclear power plants regarded as significant by the regulatory authority, the Finnish Centre for Radiation and Nuclear Safety. In this connection, an account is given of the practical actions caused by the incidents, and their significance to reactor safety is evaluated. The main features of the incidents are also described in the general Quartely Reports, Operation of Finnish Nuclear Power Plants, which are supplemented by this report intended for experts. (author)

Study on some safety-related aspects of tyre use

NARCIS (Netherlands)

Jansen, S.T.H.; Schmeitz, A.J.C.; Maas, S.; Rodarius, C.; Akkermans, L.

2014-01-01

The tyre is a key component that affects road safety. The European commission has posted a tender aimed to study what measures on a European level can be taken in relation to the use of tyres to improve road safety. The results of this study, supported by a cost benefit analyses and carried out by

Effects of an educational patient safety campaign on patients' safety behaviours and adverse events.

Science.gov (United States)

Schwappach, David L B; Frank, Olga; Buschmann, Ute; Babst, Reto

2013-04-01

Rationale, aims and objectives  The study aims to investigate the effects of a patient safety advisory on patients' risk perceptions, perceived behavioural control, performance of safety behaviours and experience of adverse incidents. Method  Quasi-experimental intervention study with non-equivalent group comparison was used. Patients admitted to the surgical department of a Swiss large non-university hospital were included. Patients in the intervention group received a safety advisory at their first clinical encounter. Outcomes were assessed using a questionnaire at discharge. Odds ratios for control versus intervention group were calculated. Regression analysis was used to model the effects of the intervention and safety behaviours on the experience of safety incidents. Results  Two hundred eighteen patients in the control and 202 in the intervention group completed the survey (75 and 77% response rates, respectively). Patients in the intervention group were less likely to feel poorly informed about medical errors (OR = 0.55, P = 0.043). There were 73.1% in the intervention and 84.3% in the control group who underestimated the risk for infection (OR = 0.51, CI 0.31-0.84, P = 0.009). Perceived behavioural control was lower in the control group (meanCon  = 3.2, meanInt  = 3.5, P = 0.010). Performance of safety-related behaviours was unaffected by the intervention. Patients in the intervention group were less likely to experience any safety-related incident or unsafe situation (OR for intervention group = 0.57, CI 0.38-0.87, P = 0.009). There were no differences in concerns for errors during hospitalization. There were 96% of patients (intervention) who would recommend other patients to read the advisory. Conclusions  The results suggest that the safety advisory decreases experiences of adverse events and unsafe situations. It renders awareness and perceived behavioural control without increasing concerns for safety and

Food safety culture assessment using a comprehensive mixed-methods approach

NARCIS (Netherlands)

Nyarugwe, Shingai P.; Linnemann, Anita; Nyanga, Loveness K.; Fogliano, Vincenzo; Luning, Pieternel A.

2018-01-01

Food safety challenges are a global concern especially in emerging economies, which are in the midst of developmental changes. The challenges are directly or indirectly related to the behaviour and decision-making of personnel, and to an organisation's food safety culture. This study evaluated the

Surry Power Station, Units 1 and 2. Annual operating report: January--December 1977, volume I--introduction, summary of operating experience; changes, tests, experiments, and safety-related maintenance; effluent releases; data tabulations

International Nuclear Information System (INIS)

1978-01-01

A chronological operating sequence including shutdowns and occurrences during the year which required load reductions or resulted in non-load related incidents is given. Data are presented concerning plant and procedure changes, tests, experiments, safety related maintenance, effluent releases and personnel radiation exposures

Risks and safety aspects related to PET/MR examinations

International Nuclear Information System (INIS)

Brix, Gunnar; Nekolla, Elke A.; Nosske, Dietmar; Griebel, Juergen

2009-01-01

The introduction of positron emission tomography (PET)/magnetic resonance (MR) systems into medical practice in the foreseeable future may not only lead to a gain in clinical diagnosis compared to PET/computed tomography (CT) imaging due to the superior soft-tissue contrast of the MR technology but can also substantially reduce exposure of patients to ionizing radiation. On the other hand, there are also risks and health effects associated with the use of diagnostic MR devices that have to be considered carefully. This review article summarizes biophysical and biological aspects, which are of relevance for the assessment of health effects related to the exposure of patients to both ionizing radiation in PET and magnetic and electromagnetic fields in MR. On this basis, some considerations concerning the justification and optimization of PET/MR examinations are presented - as far as this is possible at this very early stage. Current safety standards do not take into account synergistic effects of ionizing radiation and magnetic and electromagnetic fields. In the light of the developing PET/MR technology, there is an urgent need to investigate this aspect in more detail for exposure levels that will occur at PET/MR systems. (orig.)

Interviews of living kidney donors to assess donation-related concerns and information-gathering practices.

Science.gov (United States)

Ruck, Jessica M; Van Pilsum Rasmussen, Sarah E; Henderson, Macey L; Massie, Allan B; Segev, Dorry L

2018-06-08

Efforts are underway to improve living kidney donor (LKD) education, but current LKD concerns and information-gathering preferences have not been ascertained to inform evidence-based resource development. As a result, prior studies have found that donors desire information that is not included in current informed consent and/or educational materials. We conducted semi-structured interviews with 50 LKDs who donated at our center to assess (1) concerns about donation that they either had personally before or after donation or heard from family members or friends, (2) information that they had desired before donation, and (3) where they sought information about donation. We used thematic analysis of verbatim interview transcriptions to identify donation-related concerns. We compared the demographic characteristics of participants reporting specific concerns using Fisher's exact test. We identified 19 unique concerns that participants had or heard about living kidney donation. 20% of participants reported having had no pre-donation concerns; 38% reported no post-donation concerns. The most common concern pre-donation was future kidney failure (22%), post-donation was the recovery process (24%), and from family was endangering their family unit (16%). 44% of participants reported being less concerned than family. 26% of participants wished they had had additional information prior to donating, including practical advice for recovery (10%) and information about specific complications (14%). Caucasian participants were more likely to hear at least one concern from family (76% vs. 33%, p = 0.02). The most commonly consulted educational resources were health care providers (100%) and websites (79% of donors since 2000). 26% of participants had had contact with other donors; an additional 20% desired contact with other LKDs. Potential donors not only have personal donation-related concerns but frequently hear donation-related concerns from family members and friends

Can we use IEC 61850 for safety related functions?

Directory of Open Access Journals (Sweden)

Luca Rocca

2016-08-01

Full Text Available Safety is an essential issue for processes that present high risk for human beings and environment. An acceptable level of risk is obtained both with actions on the process itself (risk reduction and with the use of special safety systems that switch the process into safe mode when a fault or an abnormal operation mode happens. These safety systems are today based on digital devices that communicate through digital networks. The IEC 61508 series specifies the safety requirements of all the devices that are involved in a safety function, including the communication network. Also electrical generation and distribution systems are processes that may have a significant level of risk, so the criteria stated by the IEC 61508 applies. Starting from this consideration, the paper analyzes the safety requirement for the communication network and compare them with the services of the communication protocol IEC 61850 that represents the most used protocol for automation of electrical plants. The goal of this job is to demonstrate that, from the technical point of view, IEC 61850 can be used for implementing safety-related functions, even if a formal safety certification is still missing.

Radiation safety concerns during interventional radiology

International Nuclear Information System (INIS)

Victor Raj, D.; Livingstone, Roshan Samuel

2001-01-01

Interventional radiological procedures are on the increase by virtue of the fact that these procedures replace highly invasive surgical and other procedures. Radiation dose to patients and hospital workers are of significance since these procedures tend to impart large dose to them. Moreover, long term risk from radiation absorbed by patients is of concern since the life expectancy of major fraction of patients is long after undergoing the procedure. This study intends to measure radiation dose imparted to patients as well as personnel- radiologists, technologists, nurses, etc. and estimate the risk factor involved

Reducing risks and increasing safety in everyday life: the role of the public

International Nuclear Information System (INIS)

Enander, A.

1998-01-01

Full text of publication follows: in social science risk research more attention has been paid to examining how people in general perceive risks than to how they perceive possible measures to reduce risks and to increase their own safety. The latter area is, however, becoming increasingly important to understand, particularly in the light of current emphasis on individual responsibility in risk prevention and emergency preparedness. For example, in Sweden a major effort to increase safety awareness among the general public and to increase knowledge and skills in a number of safety-related areas is at present being planned. This effort is being undertaken as a cooperative effort between different authorities and institutions and is coordinated by the Swedish Rescue Services Agency. The intentions behind this and similar programmes raise a number of questions concerning how people view risks and safety measures in their own immediate environment. Knowledge of the factors affecting willingness to take precautions is important in the design of communication and information. The factors which are of significance may be risk-related and concern perceptions of personal risk, but may also be related to attitudes an beliefs concerning different precautionary measures, to perception of social norms and conventions as well as to personal experiences and values. This paper presents some data concerning views and actions among lay groups in relation to reducing risks and increasing safety. Factors affecting these views are discussed in the light of previous research and of empirical data from some recent studies. (author)

Feedback of safety - related operational experience: Lessons learned

Energy Technology Data Exchange (ETDEWEB)

Elias, D [Commonwealth Edison Co. (United States)

1997-09-01

The presentation considers the following aspects of feedback of safety-related operational experience: lessons learned program, objectives, personnel characteristics; three types of documents for transmitting lessons learned issues.

Feedback of safety - related operational experience: Lessons learned

International Nuclear Information System (INIS)

Elias, D.

1997-01-01

The presentation considers the following aspects of feedback of safety-related operational experience: lessons learned program, objectives, personnel characteristics; three types of documents for transmitting lessons learned issues

Safety-related occurrences at the Finnish nuclear power plants

International Nuclear Information System (INIS)

Reponen, H.; Viitasaari, O.

1985-04-01

This report contains detailed descriptions of operating incidents and other safety-related matters at the Finnish nuclear power plants regarded as significant by the regulatory authority, the Finnish Centre for Radiation and Nuclear Safety. In this connection, an account is given of the practical actions caused by the incidents, and their significance to reactor safety is evaluated. The main features of the incidents are also described in the general Quartely Report for this period, Operation of Finnish Nuclear Power Plants (STUK-B-YTO 7), which is supplemented by this report intended for experts. (author)

Nuclear safety in France in 2001

International Nuclear Information System (INIS)

Anon.

2002-01-01

This article presents the milestones of 2001 concerning nuclear safety in France: 1) the new organization of nuclear safety in France, IPSN (institute of protection and nuclear safety) and OPRI (office for protection against ionizing radiation) have merged into an independent organization: IRSN (institute of radiation protection and nuclear safety); 2) a draft bill has been proposed by the government to impose to nuclear operators new obligations concerning the transfer of information to the public; 3) nuclear safety authorities have drafted a new procedure in order to cope with the demand concerning modification of nuclear fuel management particularly the increase of the burn-up; 4) new evolutions concerning the management of a major nuclear crisis as a consequence of the terrorist attack on New-york and the accident at the AZF plant in Toulouse; 5) a point is made concerning the work of the WENRA association about the harmonization of the nuclear safety policies of its different members. (A.C.)

Staff report on the environmental qualification of safety-related electrical equipment

International Nuclear Information System (INIS)

1977-12-01

The current NRC safety review process for nuclear power plants includes criteria related to the qualification of certain electrical equipment. These criteria require that electrical equipment important to safety must be qualified to function in the environment that might result from various accident conditions. Although such criteria have been applied since the early days of commercial nuclear power, the details of these criteria have been changed over the years. The evolution of environmental qualification of safety-related electrical equipment is described in Appendix A

Raspberry ketone in food supplements – High intake, few toxicity data – A cause for safety concern?

DEFF Research Database (Denmark)

Bredsdorff, Lea; Wedebye, Eva Bay; Nikolov, Nikolai Georgiev

2015-01-01

Raspberry ketone (4-(4-hydroxyphenyl)-2-butanone) is marketed on the Internet as a food supplement. The recommended intake is between 100 and 1400 mg per day. The substance is naturally occurring in raspberries (up to 4.3 mg/kg) and is used as a flavouring substance. Toxicological studies...... on raspberry ketone are limited to acute and subchronic studies in rats. When the lowest recommended daily dose of raspberry ketone (100 mg) as a food supplement is consumed, it is 56 times the established threshold of toxicological concern (TTC) of 1800 μg/day for Class 1 substances. The margin of safety (MOS......) based on a NOAEL of 280 mg/kg bw/day for lower weight gain in rats is 165 at 100 mg and 12 at 1400 mg. The recommended doses are a concern taking into account the TTC and MOS. Investigations of raspberry ketone in quantitative structure-activity relationship (QSAR) models indicated potential cardiotoxic...

Permanent Commission for Health and Safety

CERN Multimedia

Association du personnel

2007-01-01

The mandate of the Staff Association's permanent commission for Health and Safety is to examine all aspects of health and safety related to the working environment at CERN. In no way does it wish to be a substitute for the official bodies that are responsible for these matters. The Commission's aim is to formulate remarks on and make proposals about these questions to the relevant bodies and the CERN Management. Its main focus is the safety of the CERN staff but it is also concerned with the safety of the installations and of the CERN environment. The Commission reports to the Staff Council and the Executive Committee of the Staff Association.

Inroads into Equestrian Safety: Rider-Reported Factors Contributing to Horse-Related Accidents and Near Misses on Australian Roads

Directory of Open Access Journals (Sweden)

Kirrilly Thompson

2015-07-01

Full Text Available Horse riding and horse-related interactions are inherently dangerous. When they occur on public roads, the risk profile of equestrian activities is complicated by interactions with other road users. Research has identified speed, proximity, visibility, conspicuity and mutual misunderstanding as factors contributing to accidents and near misses. However, little is known about their significance or incidence in Australia. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52% reported having experienced at least one accident or near miss in the 12 months prior to the survey. Whilst our findings confirm the factors identified overseas, we also identified issues around rider misunderstanding of road rules and driver misunderstanding of rider hand signals. Of particular concern, we also found reports of potentially dangerous rider-directed road rage. We identify several areas for potential safety intervention including (1 identifying equestrians as vulnerable road users and horses as sentient decision-making vehicles (2 harmonising laws regarding passing horses, (3 mandating personal protective equipment, (4 improving road signage, (5 comprehensive data collection, (6 developing mutual understanding amongst road-users, (7 safer road design and alternative riding spaces; and (8 increasing investment in horse-related safety initiatives.

Inroads into Equestrian Safety: Rider-Reported Factors Contributing to Horse-Related Accidents and Near Misses on Australian Roads.

Science.gov (United States)

Thompson, Kirrilly; Matthews, Chelsea

2015-07-22

Horse riding and horse-related interactions are inherently dangerous. When they occur on public roads, the risk profile of equestrian activities is complicated by interactions with other road users. Research has identified speed, proximity, visibility, conspicuity and mutual misunderstanding as factors contributing to accidents and near misses. However, little is known about their significance or incidence in Australia. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52%) reported having experienced at least one accident or near miss in the 12 months prior to the survey. Whilst our findings confirm the factors identified overseas, we also identified issues around rider misunderstanding of road rules and driver misunderstanding of rider hand signals. Of particular concern, we also found reports of potentially dangerous rider-directed road rage. We identify several areas for potential safety intervention including (1) identifying equestrians as vulnerable road users and horses as sentient decision-making vehicles (2) harmonising laws regarding passing horses, (3) mandating personal protective equipment, (4) improving road signage, (5) comprehensive data collection, (6) developing mutual understanding amongst road-users, (7) safer road design and alternative riding spaces; and (8) increasing investment in horse-related safety initiatives.

Impact of Safety-Related Regulations on Codeine Use in Children: A Quasi-Experimental Study Using Taiwan's National Health Insurance Research Database.

Science.gov (United States)

Lin, Chih-Wan; Wang, Ching-Huan; Huang, Wei-I; Ke, Wei-Ming; Chao, Pi-Hui; Chen, Wen-Wen; Hsiao, Fei-Yuan

2017-07-01

Safety concerns regarding potential life-threatening adverse events associated with codeine have resulted in policy decisions to restrict its use in pediatrics. However, whether these drug safety communications have had an immediate and strong impact on codeine use remains in question. We aimed to investigate the impact of the two implemented safety-related regulations (label changes and reimbursement regulations) on the use of codeine for upper respiratory infection (URI) or cough. A quasi-experimental study was performed using Taiwan's National Health Insurance Research Database. Quarterly data of codeine prescription rates for URI/cough visits were reported, and an interrupted time series design was used to assess the impact of the safety regulations on the uses of codeine among children with URI/cough visits. Multivariable logistic regression models were used to explore patient and provider characteristics associated with the use of codeine. The safety-related regulations were associated with a significant reduction in codeine prescription rates of -4.24% (95% confidence interval [CI] -4.78 to -3.70), and the relative reduction compared with predicted rates based on preregulation projections was 60.4, 56.6, and 53.2% in the first, second, and third year after the regulations began, respectively. In the postregulation period, physicians specializing in otolaryngology (odds ratio [OR] 1.47, 95% CI 1.45-1.49), practicing in district hospitals (OR 6.84, 95% CI 5.82-8.04) or clinics (OR 6.50, 95% CI 5.54-7.62), and practicing in the least urbanized areas (OR 1.60, 95% CI 1.55-1.64) were more likely to prescribe codeine to children than their counterparts. Our study provides a successful example of how to effectively reduce the codeine prescriptions in children in the 'real-world' settings, and highlights areas where future effort could be made to improve the safety use of codeine. Future research is warranted to explore whether there was a simultaneous decrease in

Prioritization of generic safety issues

International Nuclear Information System (INIS)

Emrit, R.; Minners, W.; VanderMolen, H.

1983-12-01

This report presents the priority rankings for generic safety issues related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The report focuses on the prioritization of generic safety issues. Issues primarily concerned with the licensing process or environmental protection and not directly related to safety have been excluded from prioritization. The prioritized issues include: TMI Action Plan items under development; previously proposed issues covered by Task Action Plans, except issues designated at Unresolved Safety Issues (USIs) which had already been assigned high priority; and newly-proposed issues. Future supplements to this report will include the prioritization of additional issues. The safety priority rankings are HIGH, MEDIUM, LOW, and DROP and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolutions of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative

Data report for the safety assessment SR-Site

International Nuclear Information System (INIS)

2010-12-01

This report compiles, documents, and qualifies input data identified as essential for the long-term safety assessment of a KBS-3 repository, and forms an important part of the reporting of the safety assessment project SR-Site. The input data concern the repository system, broadly defined as the deposited spent nuclear fuel, the engineered barriers surrounding it, the host rock, and the biosphere in the proximity of the repository. The input data also concern external influences acting on the system, in terms of climate related data. Data are provided for a selection of relevant conditions and are qualified through traceable standardised procedures

Data report for the safety assessment SR-Site

Energy Technology Data Exchange (ETDEWEB)

2010-12-15

This report compiles, documents, and qualifies input data identified as essential for the long-term safety assessment of a KBS-3 repository, and forms an important part of the reporting of the safety assessment project SR-Site. The input data concern the repository system, broadly defined as the deposited spent nuclear fuel, the engineered barriers surrounding it, the host rock, and the biosphere in the proximity of the repository. The input data also concern external influences acting on the system, in terms of climate related data. Data are provided for a selection of relevant conditions and are qualified through traceable standardised procedures

Development of the international status of science and technology concerning methods and tools for operational and long-term safety cases; Weiterentwicklung des internationalen Stands von Wissenschaft und Technik zu Methoden und Werkzeugen fuer Betriebs- und Langzeitsicherheitsnachweise

Energy Technology Data Exchange (ETDEWEB)

Seher, Holger; Beuth, Thomas; Bracke, Guido; Kock, Ingo; Mayer, Kim-Marisa; Moog, Helge C.; Uhlmann, Stephan; Weyand, Torben (eds.)

2016-09-15

The project ''development of the international status of science and technology concerning methods and tools for operational and long-term safety cases'' covers the following key aspects: global aspects of the methodology for scenario assumption for the operational phase following closure, potential analysis of the derives safety cases for the project Gorleben, determination of the solid phase composition of high-level radioactive wastes using geochemical modeling calculations, search for an adequate approach for the calculation of density and viscosity of saline solutions for the future use in GRS computer codes, international approaches for an integral analysis for the host rocks clay and granite in relation to the safety requirements of BMUB.

Safety related experience in FFTF startup and operation

International Nuclear Information System (INIS)

Peterson, R.E.; Halverson, T.G.; Daughtry, J.W.

1982-06-01

The Fast Flux Test Facility (FFTF) is a 400 MW(t) sodium cooled fast reactor operating at the Hanford Engineering Development Laboratory, Richland, Washington, to conduct fuels and materials testing in support of the US LMFBR program. Startup and initial power ascension testing of the facility involved a comprehensive series of readiness reviews and acceptance tests, many of which relate to the inherent safety of the plant. Included are physics measurements, natural circulation, integrated containment leakage, shielding effectiveness, fuel failure detection, and plant protection system tests. Described are the measurements taken to confirm the design safety margins upon which the operating authorization of the plant was based. These measurements demonstrate that large margins of safety are available in the FFTF design

Safety assessment of Olkiluoto NPP units 1 and 2. Decision of the Radiation and Nuclear Safety Authority regarding the periodic safety review of the Olkiluoto NPP

International Nuclear Information System (INIS)

2010-02-01

In this safety assessment the Radiation and Nuclear Safety Authority (STUK) has evaluated the safety of the Olkiluoto Nuclear Power Plant units 1 and 2 in connection with the periodic safety review. This safety assessment provides a summary of the reviews, inspections and continuous oversight carried out by STUK. The issues addressed in the assessment and the related evaluation criteria are set forth in the nuclear energy and radiation safety legislation and the regulations issued thereunder. The provisions of the Nuclear Energy Act concerning the safe use of nuclear energy, security and emergency preparedness arrangements, and waste management are specified in more detail in the Government Decrees and Regulatory Guides issued by STUK. Based on the assessment, STUK consideres that the Olkiluoto Nuclear Power Plant units 1 and 2 meet the set safety requirements for operational nuclear power plants, the emergency preparedness arrangements are sufficient and the necessary control to prevent the proliferation of nuclear weapons has been appropriately arranged. The physical protection of the Olkiluoto nuclear power plant is not yet completely in compliance with the requirements of Government Decree 734/2008, which came into force in December 2008. Further requirements concerning this issue based also on the principle of continuous improvement were included in the decision relating to the periodic safety review. The safety of the Olkiluoto nuclear power plant was assessed in compliance with the Government Decree on the Safety of Nuclear Power Plants (733/2008), which came into force in 2008. The decree notes that existing nuclear power plants need not meet all the requirements set out for new plants. Most of the design bases pertaining to the Olkiluoto 1 and 2 nuclear power plant units were set in the 1970s. Substantial modernisations have been carried out at the Olkiluoto 1 and 2 nuclear power plant units since their commissioning to improve safety. This is in line with

Surveys of research projects concerning nuclear facility safety, financed by the Federal Ministry for the Environment, Nature Protection and Reactor Safety, 1989. (14. annual report on SR-projects)

International Nuclear Information System (INIS)

1990-11-01

Each progress report is a collection of individual reports, categorized by subject matter. They are a documentation of the contractor's progress, rendered by themselves on standardized forms, published, for the sake of general information on progress made in investigations concerning reactor safety, by the project attendance department of the GRS. The individual reports have serial numbers. Each report includes particulars of the objective, work carried out, results obtained and plans for project continuation. (orig.) [de

Exposures Resulting in Safety and Health Concerns for Child Laborers in Less Developed Countries

Directory of Open Access Journals (Sweden)

Derek G. Shendell

2016-01-01

Full Text Available Objectives. Worldwide, over 200 million children are involved in child labor, with another 20 million children subjected to forced labor, leading to acute and chronic exposures resulting in safety and health (S&H risks, plus removal from formal education and play. This review summarized S&H issues in child labor, including forced or indentured domestic labor as other sectors of child labor. Specifically, we focused on exposures leading to S&H risks. Methods. We used PubMed, Scopus, Science Direct, and Google Scholar. References were in English, published in 1990–2015, and included data focused on exposures and S&H concerns of child labor. Results. Seventy-six journal articles were identified, 67 met criteria, 57 focused on individual countries, and 10 focused on data from multiple countries (comparing 3–83 countries. Major themes of concern were physical exposures including ergonomic hazards, chemical exposure hazards, and missed education. Childhood labor, especially forced, exploitative labor, created a significant burden on child development, welfare, and S&H. Conclusions. More field researche data emphasizing longitudinal quantitative effects of exposures and S&H risks are needed. Findings warranted developing policies and educational interventions with proper monitoring and evaluation data collection, plus multiple governmental, international organization and global economic reform efforts, particularly in lower-income, less developed countries.

Requirements to be taken into account in the design, qualification startup and operation of electrical equipment for safety-related electrical systems

International Nuclear Information System (INIS)

1985-07-01

RFS or Regles Fondamentales de Surete (Basic Safety Rules) applicable to certain types of nuclear facilities lay down requirements with which compliance, for the type of facilities and within the scope of application covered by the RFS, is considered to be equivalent to compliance with technical French regulatory practice. The object of the RFS is to take advantage of standardization in the field of safety, while allowing for technical progress in that field. They are designed to enable the operating utility and contractors to know the rules pertaining to various subjects which are considered to be acceptable by the Service Central de Surete des Installations Nucleaires, or the SCSIN (Central Department for the Safety of Nuclear Facilities). These RFS should make safety analysis easier and lead to better understanding between experts and individuals concerned with the problems of nuclear safety. The SCSIN reserves the right to modify, when considered necessary, any RFS and specify, if need be, the terms under which a modification is deemed retroactive. The purpose of this RFS is to provide the rules to be respected in order that safety-related electrical systems can perform its function under plausible operating conditions

Commercial grade item (CGI) dedication of generators for nuclear safety related applications

International Nuclear Information System (INIS)

Das, R.K.; Hajos, L.G.

1993-01-01

The number of nuclear safety related equipment suppliers and the availability of spare and replacement parts designed specifically for nuclear safety related application are shrinking rapidly. These have made it necessary for utilities to apply commercial grade spare and replacement parts in nuclear safety related applications after implementing proper acceptance and dedication process to verify that such items conform with the requirements of their use in nuclear safety related application. The general guidelines for the commercial grade item (CGI) acceptance and dedication are provided in US Nuclear Regulatory Commission (NRC) Generic Letters and Electric Power Research Institute (EPRI) Report NP-5652, Guideline for the Utilization of Commercial Grade Items in Nuclear Safety Related Applications. This paper presents an application of these generic guidelines for procurement, acceptance, and dedication of a commercial grade generator for use as a standby generator at Salem Generating Station Units 1 and 2. The paper identifies the critical characteristics of the generator which once verified, will provide reasonable assurance that the generator will perform its intended safety function. The paper also delineates the method of verification of the critical characteristics through tests and provide acceptance criteria for the test results. The methodology presented in this paper may be used as specific guidelines for reliable and cost effective procurement and dedication of commercial grade generators for use as standby generators at nuclear power plants

Safety and proliferation concerns as constraints on nuclear power

International Nuclear Information System (INIS)

Gordon, L.

1981-01-01

Issues of safety and proliferation with respect to the nuclear option are discussed in this chapter. The basic premises underlying the author's analysis are: energy supply and use is a means to promote desired forms of development and not an end in itself; avoidance of nuclear mysticiam; avoidance of permanent discrimination; recognition of incommensurables; technological sophistication; and nuclear proliferation motivations apart from nuclear power development. A rational energy planner in a developing country will have to weigh carefully the interwoven factors of comparative costs and safety. Apart from cost considerations, the principal motivation for developing nuclear power is energy security

Imbuing medical professionalism in relation to safety: a study protocol for a mixed-methods intervention focused on trialling an embedded learning approach that centres on the use of a custom designed board game.

Science.gov (United States)

Ward, Marie; McAuliffe, Eilish; Ní Shé, Éidín; Duffy, Ann; Geary, Una; Cunningham, Una; Holland, Catherine; McDonald, Nick; Egan, Karen; Korpos, Christian

2017-07-17

Healthcare organisations have a responsibility for ensuring that the governance of workplace settings creates a culture that supports good professional practice. Encouraging such a culture needs to start from an understanding of the factors that make it difficult for health professionals to raise issues of concern in relation to patient safety. The focus of this study is to determine whether a customised education intervention, developed as part of the study, with interns and senior house officers (SHOs) can imbue a culture of medical professionalism in relation to patient safety and support junior doctors to raise issues of concern, while shaping a culture of responsiveness and learning. We will use quantitative and qualitative methods to collect data. The sample size will be approximately 200 interns and SHOs across the two hospital sites. Two surveys will be included with one measuring leadership inclusiveness and psychological safety and a second capturing information on safety concerns that participants may have witnessed in their places of work. The PlayDecide embedded learning intervention will be developed with key stakeholders. This will be trialled in the middle stage of data collection for both interns and SHOs. A detailed content analysis will be conducted on the surveys to assess any changes in reporting following the PlayDecide intervention. This will be compared with the incident reporting levels and the results of the preintervention and postintervention leadership inclusiveness and psychological safety survey. Statistical analysis will be conducted using SPSS. Differences will be considered statistically significant at pethics approval from University College Dublin (Ref. LS-15-19-Ward-McAuliffe: Imbuing Medical Professionalism in Relation to Safety). The study results will be disseminated through peer-reviewed publications. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No

Speaking up about traditional and professionalism-related patient safety threats: a national survey of interns and residents.

Science.gov (United States)

Martinez, William; Lehmann, Lisa Soleymani; Thomas, Eric J; Etchegaray, Jason M; Shelburne, Julia T; Hickson, Gerald B; Brady, Donald W; Schleyer, Anneliese M; Best, Jennifer A; May, Natalie B; Bell, Sigall K

2017-11-01

Open communication between healthcare professionals about care concerns, also known as 'speaking up', is essential to patient safety. Compare interns' and residents' experiences, attitudes and factors associated with speaking up about traditional versus professionalism-related safety threats. Anonymous, cross-sectional survey. Six US academic medical centres, 2013-2014. 1800 medical and surgical interns and residents (47% responded). Attitudes about, barriers and facilitators for, and self-reported experience with speaking up. Likelihood of speaking up and the potential for patient harm in two vignettes. Safety Attitude Questionnaire (SAQ) teamwork and safety scales; and Speaking Up Climate for Patient Safety (SUC-Safe) and Speaking Up Climate for Professionalism (SUC-Prof) scales. Respondents more commonly observed unprofessional behaviour (75%, 628/837) than traditional safety threats (49%, 410/837); pbarrier to speaking up about unprofessional behaviour compared with traditional safety threats (58%, 482/837 vs 42%, 348/837; psafety vignette, even when they perceived high potential patient harm (20%, 49/251 vs 71%, 179/251; psafety vignette (OR 1.90, 99% CI 1.36 to 2.66 and 1.46, 1.02 to 2.09, respectively), while only a positive perception of SUC-Prof was associated with speaking up in the professionalism vignette (1.76, 1.23 to 2.50). Interns and residents commonly observed unprofessional behaviour yet were less likely to speak up about it compared with traditional safety threats even when they perceived high potential patient harm. Measuring SUC-Safe, and particularly SUC-Prof, may fill an existing gap in safety culture assessment. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Nuclear reactor safety research in Idaho

International Nuclear Information System (INIS)

Zeile, H.J.

1983-01-01

Detailed information about the performance of nuclear reactor systems, and especially about the nuclear fuel, is vital in determining the consequences of a reactor accident. Fission products released from the fuel during accidents are the ultimate safety concern to the general public living in the vicinity of a nuclear reactor plant. Safety research conducted at the Idaho National Engineering Laboratory (INEL) in support of the U.S. Nuclear Regulatory Commission (NRC) has provided the NRC with detailed data relating to most of the postulated nuclear reactor accidents. Engineers and scientists at the INEL are now in the process of gathering data related to the most severe nuclear reactor accident - the core melt accident. This paper describes the focus of the nuclear reactor safety research at the INEL. The key results expected from the severe core damage safety research program are discussed

Social media for arthritis-related comparative effectiveness and safety research and the impact of direct-to-consumer advertising.

Science.gov (United States)

Curtis, Jeffrey R; Chen, Lang; Higginbotham, Phillip; Nowell, W Benjamin; Gal-Levy, Ronit; Willig, James; Safford, Monika; Coe, Joseph; O'Hara, Kaitlin; Sa'adon, Roee

2017-03-07

Social media may complement traditional data sources to answer comparative effectiveness/safety questions after medication licensure. The Treato platform was used to analyze all publicly available social media data including Facebook, blogs, and discussion boards for posts mentioning inflammatory arthritis (e.g. rheumatoid, psoriatic). Safety events were self-reported by patients and mapped to medical ontologies, resolving synonyms. Disease and symptom-related treatment indications were manually redacted. The units of analysis were unique terms in posts. Pre-specified conditions (e.g. herpes zoster (HZ)) were selected based upon safety signals from clinical trials and reported as pairwise odds ratios (ORs); drugs were compared with Fisher's exact test. Empirically identified events were analyzed using disproportionality analysis and reported as relative reporting ratios (RRRs). The accuracy of a natural language processing (NLP) classifier to identify cases of shingles associated with arthritis medications was assessed. As of October 2015, there were 785,656 arthritis-related posts. Posts were predominantly US posts (75%) from patient authors (87%) under 40 years of age (61%). For HZ posts (n = 1815), ORs were significantly increased with tofacitinib versus other rheumatoid arthritis therapies. ORs for mentions of perforated bowel (n = 13) were higher with tocilizumab versus other therapies. RRRs associated with tofacitinib were highest in conditions related to baldness and hair regrowth, infections and cancer. The NLP classifier had a positive predictive value of 91% to identify HZ. There was a threefold increase in posts following television direct-to-consumer advertisement (p = 0.04); posts expressing medication safety concerns were significantly more frequent than favorable posts. Social media is a challenging yet promising data source that may complement traditional approaches for comparative effectiveness research for new medications.

Development of Safety Analysis Technology for Integral Reactor

Energy Technology Data Exchange (ETDEWEB)

Sim, S. K. [Korea Atomic Energy Research Institute, Taejeon (Korea); Seul, K. W.; Kim, W. S.; Kim, W. K.; Yun, Y. G.; Ahn, H. J.; Lee, J. S.; Sin, A. D. [Korea Institute of Nuclear Safety, Taejeon (Korea)

2000-03-01

The Nuclear Desalination Plant(NDP) is being developed to produce electricity and fresh water, and is expected to locate near population zone. In the aspect of safety, it is required to protect the public and environment from the possible releases of fission products and to prevent the fresh water from the contamination of radioactivity. Thus, in a present study, the safety characteristics of the integral reactor adopting passive and inherent safety features significantly different from existing nuclear power plants were investigated based on the design of foreign and domestic integral reactors. Also, safety requirements applicable to the NDP were analyzed based on the regulatory requirements for current and advanced reactor designs, and use requirements for small-medium size reactors. Based on these analyses, some safety concerns to be considered in the design stage have been identified. They includes the use of proven technology for new safety systems, the systematic classification and selection of design basis accidents, and the safety assurance of desalination-related systems. These efforts to identify and resolve the safety concerns in the design stage will provide the early confidence of SMART safety to designers, and the technical basis to evaluate the safety to reviewers in the future. 8 refs., 20 figs., 4 tabs. (Author)

Machine and Woodworking Tool Safety. Module SH-24. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on machine and woodworking tool safety is one of 50 modules concerned with job safety and health. This module discusses specific practices and precautions concerned with the efficient operation and use of most machine and woodworking tools in use today. Following the introduction, 13 objectives (each keyed to a page in the…

Safety-related occurrences at the Finnish nuclear power plants

International Nuclear Information System (INIS)

Viitasaari, O.; Rantavaara, A.

1984-03-01

This report contains detailed descriptions of operating incidents and other safety-related matters at the Finnish nuclear power plants regarded as significant by the regulatory authority, the Finnish Centre for Radiation and Nuclear Safety. In this connection, an account is given of the practical actions caused by the incidents, and their significance to reactor safety is evaluated. The main features of the incidents are also described in the general Quartely Report for this period, Operation of Finnish Nuclear Power Plants (STL-B-RTO-83/7), which is supplemented by this report intended principally for experts. (author)

Regulatory standpoints on the design-basis capability of safety-related motor-operated valves(MOVs) and power-operated gate valves(POGVs)

International Nuclear Information System (INIS)

Kim, W. T.; Kum, O. H.

1999-01-01

The weakness in the design-basis capability of Motor-Operated Valves(MOVs) and the susceptibility to Pressure Locking and Thermal Binding phenomena of Power-Operated Gate Valves(POGVs) have been major concerns to be resolved in the nuclear society in and abroad since Three Mile Island accident occurred in the USA in 1979. Through detailed analysis of operating experience and regulatory activities, some MOVs and POGVs have been found to be unreliable in performing their safety functions when they are required to do so under certain conditions, especially under design-basis accident conditions. Further, it is well understood that these safety problems may not be identified by the typical valve in-service testing(IST). USNRC has published three Generic Letters, GL 89-10, GL 95-07, and GL 96-05, requiring nuclear plant licensees to take appropriate actions to resolve the problems mentioned above. Korean nuclear regulatory body has made public an administration measure called 'Regulatory recommendation to verify safety functions of the safety-related MOVs and POGVs' on June 13, 1997, and in this administration measure Korean utility is asked to submit written documents to show how it assure design-basis capability of these valves. The following are among the major concerns being considered from a regulation standpoint. Program scope and implementation priority, dynamic tests under differential pressure conditions, accuracy of diagnostic equipment, torque switch setting and torque bypass percentage, weak link analysis, motor actuator sizing, corrective actions taken to resolve pressure locking and thermal binding susceptibility, and a periodic verification program for the valves once design-basis capability has been verified

Research for enhancing reactor safety

International Nuclear Information System (INIS)

1989-05-01

Recent research for enhanced reactor safety covers extensive and numerous experiments and computed modelling activities designed to verify and to improve existing design requirements. The lectures presented at the meeting report GRS research results and the current status of reactor safety research in France. The GRS experts present results concerning expert systems and their perspectives in safety engineering, large-scale experiments and their significance in the development and verification of computer codes for thermohydraulic modelling of safety-related incidents, the advanced system code ATHLET for analysis of thermohydraulic processes of incidents, the analysis simulator which is a tool for fast evaluation of accident management measures, and investigations into event sequences and the required preventive emergency measures within the German Risk Study. (DG) [de

Thermal overload protection for electric motors on safety-related motor-operated valves: Generic Issue II.E.6.1

International Nuclear Information System (INIS)

Rothberg, O.

1988-06-01

NRC regulatory positions, as stated in Regulatory Guide 1.106, Revision 1, have been identified by the Office for Analysis and Evaluation of Operational Data (AEOD) as potential contributors to valve motor burnout. AEOD is particularly concerned about the allowed policy of bypassing thermal overload devices during normal or accident conditions. Regulatory Guide 1.106 favors compromising the function of thermal overload devices in favor of completing the safety-related action of valves. The purpose of this study was to determine if the guidance contained in Regulatory Guide 1.106 is appropriate and, if not, to recommend the necessary changes. This report describes thermal overload devices commonly used to protect safety-related valve operator motors. The regulatory guidelines stated in Regulatory Guide 1.106 along with the limitations of thermal overload protection are discussed. Supplements and alternatives to thermal overload protection are also described. Findings and conclusions of several AEOD reports are discussed. Information obtained from the standard review plan, standard technical specifications, technical specifications from representative plants, and several papers are cited

Business of Nuclear Safety Analysis Office, Nuclear Technology Test Center

International Nuclear Information System (INIS)

Hayakawa, Masahiko

1981-01-01

The Nuclear Technology Test Center established the Nuclear Safety Analysis Office to execute newly the works concerning nuclear safety analysis in addition to the works related to the proving tests of nuclear machinery and equipments. The regulations for the Nuclear Safety Analysis Office concerning its organization, business and others were specially decided, and it started the business formally in August, 1980. It is a most important subject to secure the safety of nuclear facilities in nuclear fuel cycle as the premise of developing atomic energy. In Japan, the strict regulation of safety is executed by the government at each stage of the installation, construction, operation and maintenance of nuclear facilities, based on the responsibility for the security of installers themselves. The Nuclear Safety Analysis Office was established as the special organ to help the safety examination related to the installation of nuclear power stations and others by the government. It improves and puts in order the safety analysis codes required for the cross checking in the safety examination, and carries out safety analysis calculation. It is operated by the cooperation of the Science and Technology Agency and the Agency of Natural Resources and Energy. The purpose of establishment, the operation and the business of the Nuclear Safety Analysis Office, the plan of improving and putting in order of analysis codes, and the state of the similar organs in foreign countries are described. (Kako, I.)

Preventive Effects of Safety Helmets on Traumatic Brain Injury after Work-Related Falls

Directory of Open Access Journals (Sweden)

Sang Chul Kim

2016-10-01

Full Text Available Introduction: Work-related traumatic brain injury (TBI caused by falls is a catastrophic event that leads to disabilities and high socio-medical costs. This study aimed to measure the magnitude of the preventive effect of safety helmets on clinical outcomes and to compare the effect across different heights of fall. Methods: We collected a nationwide, prospective database of work-related injury patients who visited the 10 emergency departments between July 2010 and October 2012. All of the adult patients who experienced work-related fall injuries were eligible, excluding cases with unknown safety helmet use and height of fall. Primary and secondary endpoints were intracranial injury and in-hospital mortality. We calculated adjusted odds ratios (AORs of safety helmet use and height of fall for study outcomes, and adjusted for any potential confounders. Results: A total of 1298 patients who suffered from work-related fall injuries were enrolled. The industrial or construction area was the most common place of fall injury occurrence, and 45.0% were wearing safety helmets at the time of fall injuries. The safety helmet group was less likely to have intracranial injury comparing with the no safety helmet group (the adjusted odds ratios (ORs (95% confidence interval (CI: 0.42 (0.24–0.73, however, there was no statistical difference of in-hospital mortality between two groups (the adjusted ORs (95% CI: 0.83 (0.34–2.03. In the interaction analysis, preventive effects of safety helmet on intracranial injury were significant within 4 m height of fall. Conclusions: A safety helmet is associated with prevention of intracranial injury resulting from work-related fall and the effect is preserved within 4 m height of fall. Therefore, wearing a safety helmet can be an intervention for protecting fall-related intracranial injury in the workplace.

Configuration control during maintenance of safety related equipment

International Nuclear Information System (INIS)

Irish, C.S.

2001-01-01

Possibly the most important aspect of performing maintenance of safety related equipment is maintaining the component's original design basis. Assuring that the repaired item will perform the same safety function within the original performance and equipment qualification parameters is commonly referred to as configuration control. Maintaining configuration control of a technologically current well documented item is easy. Unfortunately, this does not describe most safety related items requiring maintenance within the global nuclear industry. Items such as motors, transformers, metal clad switchgear (low and medium voltage circuit breakers), refrigeration compressors, and electronic components (i.e. circuit boards, power supplies, regulators, etc.) which routinely require repair have been in service for twenty plus years. As a result, finding replacement parts and or material to repair the items to the original condition is becoming more and more difficult. An added difficulty is the lack of original technical documentation available on the item which is being repaired. The lack of technical documentation makes it difficult to identify replacement material and parts when the original part or material is not available. The lack of documentation also makes it difficult to test the repaired item to make sure that the original configuration has been maintained after the repair. The presentation will discuss the details of repairing various items including motors, metal clad switchgear, refrigeration compressors and power supplies and the controls which are necessary to maintain the configuration of the original item. The discussion will include the Quality Assurance and engineering necessary to identify and evaluate replacement material and parts necessary to perform repairs on safety related equipment when the original material or part is not available. Examples of repairs which required different parts or materials than the original to be used in the repair will be

Configuration control during maintenance of safety related equipment

International Nuclear Information System (INIS)

Irish, C.S.

2003-01-01

Possibly the most important aspect of performing maintenance of safety related equipment is maintaining the component's original design basis. Assuring that the repaired item will perform the same safety function within the original performance and equipment qualification parameters is commonly referred to as configuration control. Maintaining configuration control of a technologically current well documented item is easy. Unfortunately, this does not describe most safety related items requiring maintenance within the global nuclear industry. Items such as motors, transformers, metal clad switchgear (low and medium voltage circuit breakers), refrigeration compressors, and electronic components (i.e. circuit boards, power supplies, regulators, etc.) which routinely require repair have been in service for twenty plus years. As a result, finding replacement parts and or material to repair the items to the original condition is becoming more and more difficult. An added difficulty is the lack of original technical documentation available on the item which is being repaired. The lack of technical documentation makes it difficult to identify replacement material and parts when the original part or material is not available. The lack of documentation also makes it difficult to test the repaired item to make sure that the original configuration has been maintained after the repair. The presentation will discuss the details of repairing various items including motors, metal clad switchgear, refrigeration compressors and power supplies and the controls which are necessary to maintain the configuration of the original item. The discussion will include the Quality Assurance and engineering necessary to identify and evaluate replacement material and parts necessary to perform repairs on safety related equipment when the original material or part is not available. Examples of repairs which required different parts or materials than the original to be used in the repair will be

Some Subjects and Relations According to the Act about Safety at Work

OpenAIRE

Marino Đ. Učur

2015-01-01

Complex relations in the field of safety at work could not be present without the subjects which have a specific status and specific rights, obligations and responsibilities regulated by the Occupational Health and Safety Act. This paper deals with: employer’s designated employee for the implementation of occupational health and safety activities, employees’ elected representative for health and safety protection at work, occupational medicine specialist, occupational health and safety sp...

Work stress and patient safety: observer-rated work stressors as predictors of characteristics of safety-related events reported by young nurses.

Science.gov (United States)

Elfering, A; Semmer, N K; Grebner, S

This study investigates the link between workplace stress and the 'non-singularity' of patient safety-related incidents in the hospital setting. Over a period of 2 working weeks 23 young nurses from 19 hospitals in Switzerland documented 314 daily stressful events using a self-observation method (pocket diaries); 62 events were related to patient safety. Familiarity of safety-related events and probability of recurrence, as indicators of non-singularity, were the dependent variables in multilevel regression analyses. Predictor variables were both situational (self-reported situational control, safety compliance) and chronic variables (job stressors such as time pressure, or concentration demands and job control). Chronic work characteristics were rated by trained observers. The most frequent safety-related stressful events included incomplete or incorrect documentation (40.3%), medication errors (near misses 21%), delays in delivery of patient care (9.7%), and violent patients (9.7%). Familiarity of events and probability of recurrence were significantly predicted by chronic job stressors and low job control in multilevel regression analyses. Job stressors and low job control were shown to be risk factors for patient safety. The results suggest that job redesign to enhance job control and decrease job stressors may be an important intervention to increase patient safety.

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites

Directory of Open Access Journals (Sweden)

Yuzhong Shen

2017-01-01

Full Text Available Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation and distal contextual factors (leadership and safety climate. However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader–member exchange (LMX, and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job.

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites.

Science.gov (United States)

Shen, Yuzhong; Ju, Chuanjing; Koh, Tas Yong; Rowlinson, Steve; Bridge, Adrian J

2017-01-05

Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation) and distal contextual factors (leadership and safety climate). However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM) technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader-member exchange (LMX), and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job.

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites

Science.gov (United States)

Shen, Yuzhong; Ju, Chuanjing; Koh, Tas Yong; Rowlinson, Steve; Bridge, Adrian J.

2017-01-01

Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation) and distal contextual factors (leadership and safety climate). However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM) technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader–member exchange (LMX), and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job. PMID:28067775

Commercial-grade motors in safety-related applications: Final report

International Nuclear Information System (INIS)

Holzman, P.M.

1988-04-01

The objective of this project was to discuss the process necessary to utilize commercial grade equipment in safety related applications and to provide utilities with guidance for accepting commercial grade motors for safety-related applications. The generic commercial-grade concepts presented in this report can be successfully applied to motors. Commercial grade item utilization has the greatest applicability to motors in ''mild'' environments, because these motors are essentially similar to commercial grade motors in materials, construction methods, and capabilities. The acceptance process is less applicable to motors that are subject to ''harsh'' environments during postulated accidents, because of the unique design features and testing required to qualify these motors

A development of an evaluation flow chart for seismic stability of rock slopes based on relations between safety factor and sliding failure

International Nuclear Information System (INIS)

Kawai, Tadashi; Ishimaru, Makoto

2010-01-01

Recently, it is necessary to assess quantitatively seismic safety of critical facilities against the earthquake- induced rock slope failure from the viewpoint of seismic PSA. Under these circumstances, it is needed to evaluate the seismic stability of surrounding slopes against extremely strong ground motions. In order to evaluate the seismic stability of surrounding slopes, the most conventional method is to compare safety factors on an expected sliding surface, which is calculated from the stability analysis based on the limit equilibrium concept, to a critical value which judges stability or instability. The method is very effective to examine whether or not the sliding surface is safe. However, it does not mean that the sliding surface falls whenever the safety factor becomes smaller than the critical value during an earthquake. Therefore the authors develop a new evaluation flow chart for the seismic stability of rock slopes based on relations between safety factor and sliding failure. Furthermore, the developed flow chart was validated by comparing two kinds of safety factors calculated from a centrifuge test result concerned with a rock slope. (author)

Development of FPGA-based safety-related I and C systems

Energy Technology Data Exchange (ETDEWEB)

Goto, Y.; Oda, N.; Miyazaki, T.; Hayashi, T.; Sato, T.; Igawa, S. [08, Shinsugita-cho, Isogo-ku, Yokohama 235-8523 (Japan); 1, Toshiba-cho, Fuchu, Tokyo 183-8511 (Japan)

2006-07-01

Toshiba has developed Non-rewritable (NRW) Field Programmable Gate Array (FPGA)-based safety-related Instrumentation and Control (I and C) system [1]. Considering application to safety-related systems, nonvolatile and non-rewritable FPGA which is impossible to be changed after once manufactured has been adopted in Toshiba FPGA-based system. FPGA is a device which consists only of defined digital circuit: hardware, which performs defined processing. FPGA-based system solves issues existing both in the conventional systems operated by analog circuits (analog-based system) and the systems operated by central processing unit (CPU-based system). The advantages of applying FPGA are to keep the long-life supply of products, improving testability (verification), and to reduce the drift which may occur in analog-based system. The system which Toshiba developed this time is Power Range Monitor (PRM). Toshiba is planning to expand application of FPGA-based technology by adopting this development method to the other safety-related systems from now on. (authors)

Seismic fragility testing of naturally-aged, safety-related, class 1E battery cells

International Nuclear Information System (INIS)

Bonzon, L.L.; Hente, D.B.; Kukreti, B.M.; Schendel, J.S.; Black, D.A.; Paulsen, G.D.; Tulk, J.D.; Janis, W.J.; Aucoin, B.D.

1984-01-01

The concern over seismic susceptibility of naturally-aged lead-acid batteries used for safety-related emergency power in nuclear power stations was brought about by battery problems that periodically had been reported in Licensee Event Reports (LERs). The Turkey Point Station had reported cracked and buckled plates in several cells in October 1974 (LER 75-5). The Fitzpatrick Station had reported cracked battery cell cases in October 1977 (LER 77-55) and again in September 1979 (LER 79-59). The Browns Ferry Station had reported a cracked cell leaking a small quantity of electrolyte in July 1981 (LER 81-42). The Indian Point Station had reported cracked and leaking cells in both February (LER 82-7) and April 1982 (LER 82-16); both of these LERs indicated the cracked cells were due to expansion (i.e., growth) of the positive plates

Technical safety appraisal of buildings 9206 and 9212, Oak Ridge Y-12 plant

International Nuclear Information System (INIS)

1989-03-01

This report covers the results of a Safety Performance Review of the Y-12 Plant conducted during the period July 25 through August 3, 1988. A Safety Performance Review is a followup to assess changes in performance since the 1986 Technical Safety Appraisal (TSA). This review is patterned after a TSA and covered the overall safety performance at Y-12, evaluating progress to date against standards of accepted practice. The review included coverage of actions taken in response to recommendations in the TSA conducted in July--August 1986. Remaining issues were identified through an assessment of safety program deficiencies and their root causes. For each of the 14 safety-related functional areas at the Y-12 Plant, results of this review are listed in Section V. These results include a discussion, conclusions, and any new safety concerns for each program. Appendix A contains a description of the system for categorizing concerns, and the concerns are summarily tabulated in Appendix B for all programs. Appendix C describes the contractor's response and current status of each of the 59 recommendations contained in the 1986 TSA

Vaccine Safety

Science.gov (United States)

... During Pregnancy Frequently Asked Questions about Vaccine Recalls Historical Vaccine Safety Concerns FAQs about GBS and Menactra ... CISA Resources for Healthcare Professionals Evaluation Current Studies Historical Background 2001-12 Publications Technical Reports Vaccine Safety ...

Identifying Food Safety Concerns when Communication Barriers Exist

Science.gov (United States)

Neal, Jack A.; Dawson, Mary; Madera, Juan M.

2011-01-01

Abstract: Students must be prepared to lead a diverse workforce. The objective of this study was to establish a teaching method that helps students identify barriers to food safety while working in a simulated environment with communication barriers. This study employed a perspective taking exercise based upon the principles of social learning…

NRC safety research in support of regulation, 1988

International Nuclear Information System (INIS)

1989-05-01

This report, the fourth in a series of annual reports, was prepared in response to Congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during 1988. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

Morality and its relation to political ideology: the role of promotion and prevention concerns.

Science.gov (United States)

Cornwell, James F M; Higgins, E Tory

2013-09-01

Our research investigated whether promotion concerns with advancement and prevention concerns with security related to moral beliefs and political ideology. Study 1 found that chronic prevention and promotion focus had opposite relations to binding foundation endorsement (as measured by the Moral Foundations Questionnaire), that is, positive for prevention and negative for promotion, and opposite relations to political ideology, that is, more conservative for prevention and more liberal for promotion, and the relation between focus and political ideology was partially mediated by binding foundation endorsement. Study 2 showed that promotion and prevention, even as situationally induced states, can contribute to differences in binding foundation endorsement, with prevention producing stronger endorsement (compared with a control) and promotion producing weaker endorsement.

41 CFR 102-80.30 - What are Federal agencies' responsibilities concerning lead?

Science.gov (United States)

2010-07-01

... agencies' responsibilities concerning lead? 102-80.30 Section 102-80.30 Public Contracts and Property... PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Safety and Environmental Management Lead § 102-80.30 What are Federal agencies' responsibilities concerning lead? Federal agencies have the following...

Safety brings CERNois together

CERN Multimedia

CERN Bulletin

2012-01-01

The World Day for Health and Safety at Work, which was celebrated at CERN on 27 April, provided an opportunity for the safety professionals and members of the CERN personnel to get together to discuss joint concerns. It was a good opportunity for people to learn to distinguish between good and bad habits.   Members of the CERN Fire Brigade advise the Director-General. Two weeks ago, for the second year running, CERN’s restaurants hosted World Day for Health and Safety at Work stands. And once again, the stands attracted considerable interest. “Many people consulted our experts on safety issues relating in particular to ergonomics and electrical risks, the two themes to which we devoted particular attention this time,” explained Charles-Edouard Sala, a member of the BE Department’s Safety Unit and co-organiser of the event. The cardiac massage competition organised by members of CERN's Fire Brigade attracted a large number of competitors. No fe...

Ordinance concerning the filing of transport of nuclear fuel materials

International Nuclear Information System (INIS)

1987-01-01

This Order provides provisions concerning nuclear fuel substances requiring notification (nuclear fuel substance, material contaminated with nuclear fuel substances, fissionable substances, etc.), procedure for notification (to prefectural public safety commission), certificate of transpot (issued via public safety commission), instructions (speed of vehicle for transporting nuclear fuel substances, parking of vehicle, place for loading and unloading of nuclear fuel substances, method for loading and unloading, report to police, measures for disaster prevention during transport, etc.), communication among members of public safety commission (for smooth transport), notification of alteration of data in transport certificate (application to be submitted to public safety commission), application of reissue of transport certificate, return of transport certificate, inspection concerning transport (to be performed by police), submission of report (to be submitted by refining facilities manager, processing facilities manager, nuclear reactor manager, master of foreign nuclear powered ship, reprocessing facilities manager, waste disposal facilities manager; concerning stolen or missing nuclear fuel substances, traffic accident, unusual leakage of nuclear fuel substances, etc.). (Nogami, K.)

Safety and environmental aspects in LNG carrier design

International Nuclear Information System (INIS)

Takashi Yoneyama

1997-01-01

'Safety and Reliability' has been and will continue to be a key phr ase in marine transportation of LNG. Mitsui Engineering and Shipbuilding Co.,Ltd. has utilized its all expertise and state of art technologies to realize this objective, resulting in exceptionally successful operations of LNG carrier built by the Co. In line with growing global concern about environmental issues, we need to pay more attention to the environmental aspects of the design and construction of LNG carriers. Accordingly, in this paper, we present some topics related safety and environmental concerns which need to be taken into consideration in LNG carriers design and construction. (Author). 7 figs

Safety and environmental aspects in LNG carrier design

Energy Technology Data Exchange (ETDEWEB)

Yoneyama, Takashi [Mitsui Shipbuilding and Engineering Co. Ltd., Tokyo (Japan)

1997-06-01

`Safety and Reliability` has been and will continue to be a key phr ase in marine transportation of LNG. Mitsui Engineering and Shipbuilding Co.,Ltd. has utilized its all expertise and state of art technologies to realize this objective, resulting in exceptionally successful operations of LNG carrier built by the Co. In line with growing global concern about environmental issues, we need to pay more attention to the environmental aspects of the design and construction of LNG carriers. Accordingly, in this paper, we present some topics related safety and environmental concerns which need to be taken into consideration in LNG carriers design and construction. (Author). 7 figs.

Work safety and sustainable development in enterprise

Institute of Scientific and Technical Information of China (English)

TANG Min-kang; ZHOU Yue; XU Jian-hong

2005-01-01

The nature of work safety and the way insisting on sustainable development in enterprise were analyzed. It indicates that problem of work safety in enterprise is closely related to the public's consciousness, to the development of science and technology, and to the weakening of safety management during the economic transition period. However, it is the people's questions concerned in the final analysis for the forming and development of the problem of work safety. Therefore, in order to solve the problem of work safety radically, the most basic way of insisting on the sustainable development in safety administration is to do a good job of every aspect about people. We should improve all people quality in science and culture and strengthen their safety and legal consciousness to form correct safety value concept. We should fortify safety legislation and bring close attention to approach and apply new safety technology.

Driving safety: concerns and experiences of parents of adolescent drivers with type 1 diabetes.

Science.gov (United States)

Cox, Daniel J; Gonder-Frederick, Linda A; Shepard, Jaclyn A; Campbell, Laura K; Vajda, Karen A

2012-09-01

Driving is a dangerous activity for adolescents, perhaps being even more precarious for adolescents with type 1 diabetes due to the possibility of extreme blood glucose (BG). There is no available data on adolescent driving safety concerns and type 1 diabetes. To begin addressing this issue, we surveyed parents regarding their observations and concerns. Seventy-two parents (87.5% mothers) of adolescent drivers aged 16-19 with type 1 diabetes provided analyzable data. Females comprised 36% of their adolescents, with 74% using pump therapy. In the past year, 13 and 84% of parents reported that their adolescent had experienced severe or moderate disruptive hypoglycemia, respectively. Over half (56%) of the parents reported moderate to extreme worry about how diabetes impacted their adolescent's driving, while only 21% of parents thought their adolescents had similar concerns (p = 0.037). Almost one third (31%) of parents thought their adolescent need not treat low BG until it fell below 70 mg/dL, 13% thought their adolescent could safely drive with BG below 65 mg/dL. And, 31 and 14% of parents, respectively, reported their adolescent had been in a collision or stopped by the police in the past year, which they attributed to both hypo- and hyperglycemia. Adolescents reportedly took steps to prevent hypo- and hyperglycemia while driving, but more aggressively avoided hypoglycemia (p < 0.001). While this data is limited, lacking a non-diabetic control group and randomized sample, it does suggest that driving and adolescent type 1 diabetes deserve further attention and investigation. © 2012 John Wiley & Sons A/S.

Performance Monitoring for Nuclear Safety Related Instrumentation at PUSPATI TRIGA Reactor (RTP)

International Nuclear Information System (INIS)

Zareen Khan Abdul Jalil Khan; Ridzuan Abdul Mutalib; Mohd Sabri Minhat

2015-01-01

The Reactor TRIGA PUSPATI (RTP) at Malaysia Nuclear Agency is a TRIGA Mark II type reactor and pool type cooled by natural circulation of light water. This paper describe on performance monitoring for nuclear safety related instrumentation in TRIGA PUSPATI Reactor (RTP) of based on various parameter of reactor safety instrument channel such as log power, linear power, Fuel temperature, coolant temperature will take into consideration. Methodology of performance on estimation and monitoring is to evaluate and analysis of reactor parameters which is important of reactor safety and control. And also to estimate power measurement, differential of log and linear power and fuel temperature during reactor start-up, operation and shutdown .This study also focus on neutron power fluctuation from fission chamber during reactor start-up and operation. This work will present result of performance monitoring from RTP which indicated the safety parameter identification and initiate safety action on crossing the threshold set point trip. Conclude that performance of nuclear safety related instrumentation will improved the reactor control and safety parameter during reactor start-up, operation and shutdown. (author)

Report on the safety of wind turbines installations; Rapport sur la securite des installations eoliennes

Energy Technology Data Exchange (ETDEWEB)

Guillet, R.; Leteurtrois, J.P.

2004-07-01

This report aims to study the regulatory framework governing the safety of wind turbines and proposes improvement actions. It concerns the wind turbines risk assessment, the technical bases of the wind turbines safety, the regulation relative to the safety and possible evolutions. (A.L.B.)

Safety-related LWR research. Annual report 1989

International Nuclear Information System (INIS)

1990-11-01

The main topics in this annual report 1989 are phenomena of heavy fuel damage and single aspects of a core meltdown accident. The examined single aspects refer to aerosol behavior and filter engineering and to methods for assessment and minimization of the radiological consequences of reactor accidents. Different contributions to selected, safety-related problems of an advanced pressurized-water reactor complete the topic spectrum. The annual report 1989 describes the progress of the research work wich was carried out in the area of safety research by institutes and departments of the KfK, and on behalf of the KfK by external institutions. The individual contributions represent the status of work at the end of the year under review, 1989. (orig./HP) [de

A prioritization of generic safety issues

International Nuclear Information System (INIS)

Emrit, R.; Riggs, R.; Milstead, W.; Pittman, J.

1991-07-01

This report presents the priority rankings for generic safety issues and related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The report focuses on the prioritization of generic safety issues. Issues primarily concerned with the licensing process or environmental protection and not directly related to safety have been excluded from prioritization. The prioritized issues include: TMI Action Plan items under development; previously proposed issues covered by Task Action Plans, except issues designated as Un-resolved Safety Issues (USIs) which had already been assigned high priority; and newly-proposed issues. Future supplements to this report will include the prioritization of additional issues. The safety priority rankings are High, Medium, Low, and Drop and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolutions of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative. 1310 refs

Brief review: sleep health and safety for transportation workers

Directory of Open Access Journals (Sweden)

Quan SF

2015-03-01

Full Text Available Accidents related to sleepiness related fatigue are an important concern in transportation related industries. This brief review outlines the public safety concerns with sleepiness related fatigue in the railroad, aviation and motor vehicle transportation fields. In addition, the common causes of sleepiness related fatigue, and impact on operators and their families are highlighted. It is suggested that in addition to greater recognition and changes in duty hour regulations, there should be a greater emphasis on the education of operators on the importance of sleep and circadian factors in causing fatigue, as well as strategies to mitigate their impact.

Safety-related site characteristics - a relative comparison of the Forsmark reference areas

International Nuclear Information System (INIS)

Winberg, Anders

2010-12-01

SKB has over the years from 2002 to 2008 conducted site investigations in Forsmark and Laxemar, with associated site modeling, design and safety analysis. In mid-2009 Forsmark was selected on the basis of analysis made as site for a future repository for spent nuclear fuel. Based on defined safety-related geoscientific location factors data from Forsmark are compared in relative terms with data from a number of locations in Sweden, previously studied by SKB. The factors compared include: the rock's composition and structures, future climate evolution, rock mechanical conditions, earthquakes, groundwater flow, groundwater composition, delay of solutes, and the ability to characterize and describe the location. Past comparisons of these properties for the selected sites show that none of these sites collectively show any significant benefit over Forsmark site for a repository. This does not preclude that there may be places on the basis of an overall assessment of geoscientific location factors could be equivalent to Forsmark

Safety surrogate histograms (SSH): A novel real-time safety assessment of dilemma zone related conflicts at signalized intersections.

Science.gov (United States)

Ghanipoor Machiani, Sahar; Abbas, Montasir

2016-11-01

Drivers' indecisiveness in dilemma zones (DZ) could result in crash-prone situations at signalized intersections. DZ is to the area ahead of an intersection in which drivers encounter a dilemma regarding whether to stop or proceed through the intersection when the signal turns yellow. An improper decision to stop by the leading driver, combined with the following driver deciding to go, can result in a rear-end collision, unless the following driver recognizes a collision is imminent and adjusts his or her behavior at or shortly after the onset of yellow. Considering the significance of DZ-related crashes, a comprehensive safety measure is needed to characterize the level of safety at signalized intersections. In this study, a novel safety surrogate measure was developed utilizing real-time radar field data. This new measure, called safety surrogate histogram (SSH), captures the degree and frequency of DZ-related conflicts at each intersection approach. SSH includes detailed information regarding the possibility of crashes, because it is calculated based on the vehicles conflicts. An example illustrating the application of the new methodology at two study sites in Virginia is presented and discussed, and a comparison is provided between SSH and other DZ-related safety surrogate measures mentioned in the literature. The results of the study reveal the efficacy of the SSH as complementary to existing surrogate measures. Copyright © 2015 Elsevier Ltd. All rights reserved.

Safety-evaluation report related to the operation of Callaway Plant, Unit No. 1. Docket No. 50-483

International Nuclear Information System (INIS)

1983-06-01

Additional information is presented concerning site characteristics; pipe failures; seismic instrumentation; fuel design; coolant circuits; engineered safety systems; instrumentation; power supplies; accident analysis; quality assurance; and TMI-2 requirements

Food concerns and support for environmental food policies and purchasing.

Science.gov (United States)

Worsley, Anthony; Wang, Wei C; Burton, Melissa

2015-08-01

Consumer support for pro environmental food policies and food purchasing are important for the adoption of successful environmental policies. This paper examines consumers' views of food policy options as their predisposition to purchase pro environmental foods along with their likely demographic, educational and cognitive antecedents including food and environmental concerns and universalism values (relating to care for others and the environment). An online survey to assess these constructs was conducted among 2204 Australian adults in November 2011. The findings showed strong levels of support for both environmental food policies (50%-78% support) and pro environmental food purchasing (51%-69% intending to purchase pro environmental foods). Confirmatory factor analysis and structural equation modelling showed that different cognitive mediators exist along pathways between demographics and the two outcome variables. Support for food policy was positively related to food and environment concerns (std. Beta = 0.25), universalism (0.41), perceived control (0.07), and regulatory issues (0.64 but negatively with food security issues (-0.37). Environment purchasing intentions were positively linked to food and nutrition concerns (0.13), food and environment concerns (0.24), food safety concerns (0.19), food and animal welfare concerns (0.16), universalism (0.25), female gender (0.05), education (0.04), and perceived influence over the food system (0.17). In addition, health study in years 11 and 12 was positively related to the beginning of both of these pathways (0.07 for each). The results are discussed in relation to the opportunities that communications based on the mediating variables offer for the promotion of environmental food policies and purchasing. Copyright © 2015 Elsevier Ltd. All rights reserved.

Aviation Trends Related to Atmospheric Environment Safety Technologies Project Technical Challenges

Science.gov (United States)

Reveley, Mary S.; Withrow, Colleen A.; Barr, Lawrence C.; Evans, Joni K.; Leone, Karen M.; Jones, Sharon M.

2014-01-01

Current and future aviation safety trends related to the National Aeronautics and Space Administration's Atmospheric Environment Safety Technologies Project's three technical challenges (engine icing characterization and simulation capability; airframe icing simulation and engineering tool capability; and atmospheric hazard sensing and mitigation technology capability) were assessed by examining the National Transportation Safety Board (NTSB) accident database (1989 to 2008), incidents from the Federal Aviation Administration (FAA) accident/incident database (1989 to 2006), and literature from various industry and government sources. The accident and incident data were examined for events involving fixed-wing airplanes operating under Federal Aviation Regulation (FAR) Parts 121, 135, and 91 for atmospheric conditions related to airframe icing, ice-crystal engine icing, turbulence, clear air turbulence, wake vortex, lightning, and low visibility (fog, low ceiling, clouds, precipitation, and low lighting). Five future aviation safety risk areas associated with the three AEST technical challenges were identified after an exhaustive survey of a variety of sources and include: approach and landing accident reduction, icing/ice detection, loss of control in flight, super density operations, and runway safety.

Health-related Quality of Life and Existential Concerns Among Patients with End-stage Renal Disease.

Science.gov (United States)

Bele, Samir; Bodhare, Trupti N; Mudgalkar, Nikhil; Saraf, Abhay; Valsangkar, Sameer

2012-05-01

Health-Related Quality Of Life (HRQOL) among patients with End-Stage Renal Disease (ESRD) is significantly impacted by virtue of varied disease or treatment-related factors, and its evaluation along with existential concerns is required for providing comprehensive care to the patient. The aim of this study was to describe the various dimensions of HRQOL and existential concerns and to examine the relationship between the two among patients with ESRD. A cross-sectional descriptive study was conducted among 54 patients with ESRD undergoing maintenance hemodialysis in a teaching hospital. A semi-structured questionnaire was used to assess socio-demographic characteristics and existential concerns of the respondents. The HRQOL was evaluated using a standardized scale of Kidney Disease Quality of Life-Short Form (KDQOL-SF™) questionnaire. Data were presented as frequencies, mean ± Standard Deviation (SD) for baseline characteristics and scores. Pearson correlation was used to study the association between various domains of quality of life and existential concerns. Among HRQOL, the worst results obtained were in the domain of burden of kidney disease (33.45 ± 13.53), work status (49.07 ± 24.75), quality of social interaction (62.22 ±11.80), general health (43.06 ± 13.01), and physical functioning (47.50 ± 18.88). Disrupted personal integrity (12.80 ± 2.81) and loss of continuity (5.37 ± 1.17) were most bothersome existential concerns. A co-relational model behaves distinctly eliciting weak to strong association among various domains of HRQOL and existential concerns. Patients with ESRD reported impaired HRQOL in most of the domains. Existential concerns are distinguished as important dimensions of HRQOL. Association between HRQOL and existential concerns showed that these dimensions are distinct, and there is a need for assessing and attending these entities through a multidisciplinary approach to alleviate the suffering and achieving a sense of overall

Safety

International Nuclear Information System (INIS)

2001-01-01

This annual report of the Senior Inspector for the Nuclear Safety, analyses the nuclear safety at EDF for the year 1999 and proposes twelve subjects of consideration to progress. Five technical documents are also provided and discussed concerning the nuclear power plants maintenance and safety (thermal fatigue, vibration fatigue, assisted control and instrumentation of the N4 bearing, 1300 MW reactors containment and time of life of power plants). (A.L.B.)

Medical Students Raising Concerns.

Science.gov (United States)

Druce, Maralyn R; Hickey, Andrea; Warrens, Anthony N; Westwood, Olwyn M R

2016-09-16

After a number of high-profile incidents and national reports, it has become clear that all health professionals and all medical students must be able to raise concerns about a colleague's behavior if this behavior puts patients, colleagues, or themselves at risk.Detailed evidence from medical students about their confidence to raise concerns is limited, together with examples of barriers, which impair their ability to do so. We describe a questionnaire survey of medical students in a single-center, examining self-reported confidence about raising concerns in a number of possible scenarios. Thematic analysis was applied to comments about barriers identified.Although 80% of respondents felt confident to report a patient safety issue, students were less confident around issues of probity, attitude, and conduct. This needs to be addressed to create clear mechanisms to raise concerns, as well as support for students during the process.

Climate and climate-related issues for the safety assessment SR-Site

International Nuclear Information System (INIS)

2010-12-01

The purpose of this report is to document current scientific knowledge on climate and climate-related conditions, relevant to the long-term safety of a KBS-3 repository, to a level required for an adequate treatment in the safety assessment SR-Site. The report also presents a number of dedicated studies on climate and selected climate-related processes of relevance for the assessment of long term repository safety. Based on this information, the report presents a number of possible future climate developments for Forsmark, the site selected for building a repository for spent nuclear fuel in Sweden (Figure 1-1). The presented climate developments are used as basis for the selection and analysis of SR-Site safety assessment scenarios in the SR-Site main report /SKB 2011/. The present report is based on research conducted and published by SKB as well as on research reported in the general scientific literature

Climate and climate-related issues for the safety assessment SR-Site

Energy Technology Data Exchange (ETDEWEB)

2010-12-15

The purpose of this report is to document current scientific knowledge on climate and climate-related conditions, relevant to the long-term safety of a KBS-3 repository, to a level required for an adequate treatment in the safety assessment SR-Site. The report also presents a number of dedicated studies on climate and selected climate-related processes of relevance for the assessment of long term repository safety. Based on this information, the report presents a number of possible future climate developments for Forsmark, the site selected for building a repository for spent nuclear fuel in Sweden (Figure 1-1). The presented climate developments are used as basis for the selection and analysis of SR-Site safety assessment scenarios in the SR-Site main report /SKB 2011/. The present report is based on research conducted and published by SKB as well as on research reported in the general scientific literature

Inroads into Equestrian Safety: Rider-Reported Factors Contributing to Horse-Related Accidents and Near Misses on Australian Roads

Science.gov (United States)

Thompson, Kirrilly; Matthews, Chelsea

2015-01-01

Simple Summary Riding horses on roads can be dangerous, but little is known about accidents and near misses. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52%) reported having experienced at least one accident or near miss in the 12 months prior to the survey, mostly attributed to speed. Whilst our findings confirmed factors identified overseas, we also identified issues around road rules, hand signals and road rage. This paper suggests strategies for improving the safety of horses, riders and other road users. Abstract Horse riding and horse-related interactions are inherently dangerous. When they occur on public roads, the risk profile of equestrian activities is complicated by interactions with other road users. Research has identified speed, proximity, visibility, conspicuity and mutual misunderstanding as factors contributing to accidents and near misses. However, little is known about their significance or incidence in Australia. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52%) reported having experienced at least one accident or near miss in the 12 months prior to the survey. Whilst our findings confirm the factors identified overseas, we also identified issues around rider misunderstanding of road rules and driver misunderstanding of rider hand signals. Of particular concern, we also found reports of potentially dangerous rider-directed road rage. We identify several areas for potential safety intervention including (1) identifying equestrians as vulnerable road users and horses as sentient decision-making vehicles; (2) harmonising laws regarding passing horses; (3) mandating personal protective equipment; (4) improving road signage; (5) comprehensive data collection; (6) developing mutual understanding amongst road-users; (7) safer road design and alternative riding spaces; and (8) increasing investment

78 FR 25488 - Qualification Tests for Safety-Related Actuators in Nuclear Power Plants

Science.gov (United States)

2013-05-01

... Nuclear Power Plants AGENCY: Nuclear Regulatory Commission. ACTION: Draft regulatory guide; request for... regulatory guide (DG), DG-1235, ``Qualification Tests for Safety-Related Actuators in Nuclear Power Plants... entitled ``Qualification Tests for Safety-Related Actuators in Nuclear Power Plants'' is temporarily...

Application of quality assurance program to safety related aging equipment or components

International Nuclear Information System (INIS)

Papaiya, N.C.

1990-01-01

This paper addresses how quality assurance programs and their criteria are applied to safety related and aging equipment or components used in commercial nuclear plant applications. The QA Programs referred to are 10CFR50 Appendix B and EPRI NP-5652. The QA programs as applicable are applied to equipment/component aging qualification, preventive maintenance, surveillance testing and procurement engineering. The intent of this paper is not the technical issues, methods and research of aging. The paper addresses QA program's application to age-related equipment or components in safety related applications. Quality Assurance Program 10CFR50 Appendix B applies to all safety related aging components or equipment related to the qualification program and associated preventive maintenance and surveillance testing programs. Quality Assurance involvement with procurement engineering for age-related commercial grade items supports EPRI NP-5652 and assures that the dedicated OGI is equal to the item purchased as a basic component to 10CFR50 Appendix B requirements

A Study of Time Response for Safety-Related Operator Actions in Non-LOCA Safety Analysis

Energy Technology Data Exchange (ETDEWEB)

Lee, Min Seok; Lee, Sang Seob; Park, Min Soo; Lee, Gyu Cheon; Kim, Shin Whan [KEPCO E and C Company, Daejeon (Korea, Republic of)

2014-10-15

The classification of initiating events for safety analysis report (SAR) chapter 15 is categorized into moderate frequency events (MF), infrequent events (IF), and limiting faults (LF) depending on the frequency of its occurrence. For the non-LOCA safety analysis with the purpose to get construction or operation license, however, it is assumed that the operator response action to mitigate the events starts at 30 minutes after the initiation of the transient regardless of the event categorization. Such an assumption of corresponding operator response time may have over conservatism with the MF and IF events and results in a decrease in the safety margin compared to its acceptance criteria. In this paper, the plant conditions (PC) are categorized with the definitions in SAR 15 and ANS 51.1. Then, the consequence of response for safety-related operator action time is determined based on the PC in ANSI 58.8. The operator response time for safety analysis regarding PC are reviewed and suggested. The clarifying alarm response procedure would be required for the guideline to reduce the operator response time when the alarms indicate the occurrence of the transient.

IAEA safety glossary. Terminology used in nuclear, radiation, radioactive waste and transport safety. Version 1.0. Working material

International Nuclear Information System (INIS)

2000-04-01

The IAEA safety standards for nuclear installations, radiation protection, radioactive waste management and the transport of radioactive materials have been historically developed in four separate programmes, each of them developing its own terminology. The purpose was to explain the meaning of technical terms that might be unfamiliar to a reader; to explain any special meanings assigned to common words or terms and to define precisely how terms are used in particular publications to avoid ambiguity concerning some important aspects of their meaning. It is intended primarily to provide guidance to the drafters and reviewers of Agency safety related publications, including IAEA Technical officers, consultants and members of Technical Committees, Advisory Groups and safety standards advisory bodies. It is also likely to be a useful source of information for other Agency staff, notably editors and translators, and for external users of IAEA safety related publications

Testosterone Replacement Therapy: Long-Term Safety and Efficacy

Directory of Open Access Journals (Sweden)

Giovanni Corona

2017-08-01

Full Text Available Recent position statements and guidelines have raised the distinction between a true and false, age-related hypogonadism (HG or late-onset hypogonadism (LOH. The former is the consequence of congenital or acquired “organic” damage of the brain centers or of the testis. The latter is mainly secondary to age-related comorbidities and does not require testosterone (T therapy (TTh. In addition, concerns related to cardiovascular (CV safety have further increased the scepticism related to TTh. In this paper, we reviewed the available evidence supporting the efficacy of TTh in non-organic HG and its long term safety. A large amount of evidence has documented that sexual symptoms are the most specific correlates of T deficiency. TTh is able to improve all aspects of sexual function independent of the pathogenetic origin of the disease supporting the scientific demonstration that LOH does exist according to an “ex-juvantibus” criterion. Although the presence of metabolic derangements could mitigate the efficacy of TTh on erectile dysfunction, the positive effect of TTh on body composition and insulin sensitivity might counterbalance the lower efficacy. CV safety concerns related to TTh are essentially based on a limited number of observational and randomized controlled trials which present important methodological flaws. When HG is properly diagnosed and TTh correctly performed no CV and prostate risk have been documented.

Decree no 2007-1557 from November 2, 2007, relative to basic nuclear facilities and to the nuclear safety control of nuclear materials transport

International Nuclear Information System (INIS)

2007-11-01

This decree concerns the enforcement of articles 5, 17 and 36 of the law 2006-686 from June 13, 2006, relative to the transparency and safety in the nuclear domain. A consultative commission of basic nuclear facilities is established. The decree presents the general dispositions relative to basic nuclear facilities, the dispositions relative to their creation and operation, to their shutdown and dismantling. It precises the dispositions in the domain of public utility services, administrative procedures and sanctions. It stipulates also the particular dispositions relative to other facilities located in the vicinity of nuclear facilities, relative to the use of pressure systems, and relative to the transport of radioactive materials. (J.S.)

NRC safety research in support of regulation--FY 1989

International Nuclear Information System (INIS)

1990-04-01

This report, the fifth in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1989. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

NRC safety research in support of regulation, FY 1991

International Nuclear Information System (INIS)

1992-04-01

This report, the seventh in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1991. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

NRC safety research in support of regulation, FY 1990

International Nuclear Information System (INIS)

1991-04-01

This report, the sixth in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1990. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

Safety-evaluation report related to the operation of Diablo Canyon Nuclear Power Plant, Units 1 and 2 (Docket Nos. 50-275 and 50-323). Supplement No. 16

International Nuclear Information System (INIS)

1983-08-01

This supplement addresses certain allegations received by the staff concerning safety deficiencies at the Diablo Canyon project, specifically those relative to design aspects of the component cooling water system (CCWS), including its seismic classification, single failure considerations, and its heat removal capabilities. It is based on the staff's re-review of the Diablo Canyon Final Safety Analysis Report (FSAR); on a site walkdown conducted on January 12, 1983; on information obtained during meetings with the applicant dated March 15, 18, and 25, April 4, 7, and 15, and May 3 and 18, 1983

Industrial radiography in the Philippines: safety concerns

International Nuclear Information System (INIS)

David, Jocelyn L.; Artificio, Thelma P.; Cerbolles, Justina S.; Caseria, Estrella S.; Agron, Inocencio A.

2005-01-01

Industrial radiography utilizes the highest activity (5.55 tera becquerel (TBq) to 7.4 TBq) among the various mobile application of radioisotopes. It is highly possible that radiographers exceed the annual dose limits for workers occupationally exposed to radiation (as prescribed in the Code of PNRI Regulations part 3) if they do not give cautious consideration to the factors that determine the radiation dose, namely: the gamma source dose rates, time distance and shielding. To enhance the safety culture among radiographers, various strategies are recommended to be undertaken by the Philippine Nuclear Research Institute as well as the licensed companies undertaking activities in industrial radiography. (Authors)

Evaluating North Carolina Food Pantry Food Safety-Related Operating Procedures.

Science.gov (United States)

Chaifetz, Ashley; Chapman, Benjamin

2015-11-01

Almost one in seven American households were food insecure in 2012, experiencing difficulty in providing enough food for all family members due to a lack of resources. Food pantries assist a food-insecure population through emergency food provision, but there is a paucity of information on the food safety-related operating procedures used in the pantries. Food pantries operate in a variable regulatory landscape; in some jurisdictions, they are treated equivalent to restaurants, while in others, they operate outside of inspection regimes. By using a mixed methods approach to catalog the standard operating procedures related to food in 105 food pantries from 12 North Carolina counties, we evaluated their potential impact on food safety. Data collected through interviews with pantry managers were supplemented with observed food safety practices scored against a modified version of the North Carolina Food Establishment Inspection Report. Pantries partnered with organized food bank networks were compared with those that operated independently. In this exploratory research, additional comparisons were examined for pantries in metropolitan areas versus nonmetropolitan areas and pantries with managers who had received food safety training versus managers who had not. The results provide a snapshot of how North Carolina food pantries operate and document risk mitigation strategies for foodborne illness for the vulnerable populations they serve. Data analysis reveals gaps in food safety knowledge and practice, indicating that pantries would benefit from more effective food safety training, especially focusing on formalizing risk management strategies. In addition, new tools, procedures, or policy interventions might improve information actualization by food pantry personnel.

Safety Issues with Hydrogen as a Vehicle Fuel

Energy Technology Data Exchange (ETDEWEB)

L. C. Cadwallader; J. S. Herring

1999-09-01

This report is an initial effort to identify and evaluate safety issues associated with the use of hydrogen as a vehicle fuel in automobiles. Several forms of hydrogen have been considered: gas, liquid, slush, and hydrides. The safety issues have been discussed, beginning with properties of hydrogen and the phenomenology of hydrogen combustion. Safety-related operating experiences with hydrogen vehicles have been summarized to identify concerns that must be addressed in future design activities and to support probabilistic risk assessment. Also, applicable codes, standards, and regulations pertaining to hydrogen usage and refueling have been identified and are briefly discussed. This report serves as a safety foundation for any future hydrogen safety work, such as a safety analysis or a probabilistic risk assessment.

Safety Issues with Hydrogen as a Vehicle Fuel

Energy Technology Data Exchange (ETDEWEB)

Cadwallader, Lee Charles; Herring, James Stephen

1999-10-01

This report is an initial effort to identify and evaluate safety issues associated with the use of hydrogen as a vehicle fuel in automobiles. Several forms of hydrogen have been considered: gas, liquid, slush, and hydrides. The safety issues have been discussed, beginning with properties of hydrogen and the phenomenology of hydrogen combustion. Safety-related operating experiences with hydrogen vehicles have been summarized to identify concerns that must be addressed in future design activities and to support probabilistic risk assessment. Also, applicable codes, standards, and regulations pertaining to hydrogen usage and refueling have been identified and are briefly discussed. This report serves as a safety foundation for any future hydrogen safety work, such as a safety analysis or a probabilistic risk assessment.

Modulation of Brain Activity with Noninvasive Transcranial Direct Current Stimulation (tDCS): Clinical Applications and Safety Concerns

Science.gov (United States)

Zhao, Haichao; Qiao, Lei; Fan, Dongqiong; Zhang, Shuyue; Turel, Ofir; Li, Yonghui; Li, Jun; Xue, Gui; Chen, Antao; He, Qinghua

2017-01-01

Transcranial direct current stimulation (tDCS) is a widely-used tool to induce neuroplasticity and modulate cortical function by applying weak direct current over the scalp. In this review, we first introduce the underlying mechanism of action, the brief history from discovery to clinical scientific research, electrode positioning and montages, and parameter setup of tDCS. Then, we review tDCS application in clinical samples including people with drug addiction, major depression disorder, Alzheimer's disease, as well as in children. This review covers the typical characteristics and the underlying neural mechanisms of tDCS treatment in such studies. This is followed by a discussion of safety, especially when the current intensity is increased or the stimulation duration is prolonged. Given such concerns, we provide detailed suggestions regarding safety procedures for tDCS operation. Lastly, future research directions are discussed. They include foci on the development of multi-tech combination with tDCS such as with TMS and fMRI; long-term behavioral and morphological changes; possible applications in other research domains, and more animal research to deepen the understanding of the biological and physiological mechanisms of tDCS stimulation. PMID:28539894

EDA activities related to safety

International Nuclear Information System (INIS)

Gordon, C.; Raeder, J.

2001-01-01

This article reviews the accomplishments in ITER safety analysis during the course of the Engineering Design Activities (EDA). The key aspects of ITER safety analysis are: effluents and emissions from normal operation, including planned maintenance activities; occupational safety for workers at the facility; radioactive materials and wastes generated during operation and from decommissioning ; potential incidents and accidents and the resulting transients. As a result of the work during the EDA it is concluded that ITER is safe

Official News relating to CERN Safety Rules

CERN Multimedia

HSE Unit

2015-01-01

The CERN Safety Rules listed below have been published on the official CERN Safety Rules website (see here).   Safety Regulation SR-WS Works and services: this SR-WS (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS50 “Safety Coordination on CERN Worksites”. General Safety Instruction GSI-WS-1 Safety coordination for works and services: this GSI-WS-1 (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS39 “Notice of Start of Works (AOC)” and of Safety Instruction IS50 “Safety Coordination on CERN Worksites” ​Specific Safety Instruction SSI-WS-1-1 Safety coordinator for category 1 operations: this SSI-WS-1-4 (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS50 “Safety Coordination on CERN Worksites”.​ ​ In order to limit the impact on the end-of-year technical st...

Summary of tank information relating salt well pumping to flammable gas safety issues

International Nuclear Information System (INIS)

Caley, S.M.; Mahoney, L.A.; Gauglitz, P.A.

1996-09-01

The Hanford Site has 149 single-shell tanks (SSTs) containing radioactive wastes that are complex mixes of radioactive and chemical products. Active use of these SSTs was phased out completely by November 1980, and the first step toward final disposal of the waste in the SSTs is interim stabilization, which involves removing essentially all of the drainable liquid from the tank. Stabilization can be achieved administratively, by jet pumping to remove drainable interstitial liquid, or by supernatant pumping. To date, 116 tanks have been declared interim stabilized; 44 SSTs have had drainable liquid removed by salt well jet pumping. Of the 149 SSTs, 19 are on the Flammable Gas Watch List (FGWL) because the waste in these tanks is known or suspected, in all but one case, to generate and retain mixtures of flammable gases, including; hydrogen, nitrous oxide, and ammonia. Salt well pumping to remove the drainable interstitial liquid from these SSTs is expected to cause the release of much of the retained gas, posing a number of safety concerns. The scope of this work is to collect and summarize information, primarily tank data and observations, that relate salt well pumping to flammable gas safety issues. While the waste within FGWL SSTs is suspected offering flammable gases, the effect of salt well pumping on the waste behavior is not well understood. This study is being conducted for the Westinghouse Hanford Company as part of the Flammable Gas Project at the Pacific Northwest National Laboratory (PNNL). Understanding the historical tank behavior during and following salt well pumping will help to resolve the associated safety issues

Source-book of International Activities Related to the Development of Safety Cases for Deep Geological Repositories

International Nuclear Information System (INIS)

2017-01-01

All national radioactive waste management authorities recognise today that a robust safety case is essential in developing disposal facilities for radioactive waste. To improve the robustness of the safety case for the development of a deep geological repository, a wide variety of activities have been carried out by national programs and international organisations over the past years. The Nuclear Energy Agency, since first introducing the modern concept of the 'safety case', has continued to monitor major developments in safety case activities at the international level. This Source-book summarises the activities being undertaken by the Nuclear Energy Agency, the European Commission and the International Atomic Energy Agency concerning the safety case for the operational and post-closure phases of geological repositories for radioactive waste that ranges from low-level to high-level waste and for spent fuel. In doing so, it highlights important differences in focus among the three organisations

Approaching safety in the Swedish and Danish construction industry

DEFF Research Database (Denmark)

Grill, Martin; Grytnes, Regine; Törner, Marianne

2015-01-01

in accidents rates, especially in construction, and as such offer an opportunity to explore organizational and managerial issues related to safety outcomes. Methods: Semi-structured interviews were carried out with five construction managers and four construction workers in Danish and Swedish construction...... industry. The transcripts were analysed using semantic thematic analysis. Results: Seven safety related themes were distinguished, conveying safety culture differences between Swedish and Danish construction industry concerning: participatory or directive management; challenge or obey; compliance or non...... identifies seven factors perceived by the professionals as related to lower occupational accident rates in the construction industry. Engaging in participatory management, promoting long-term planning and long-term tenures, encouraging cooperation, cautiousness and compliance to rules as well as challenging...

The Relation Between Policies concerning Corporate Social Responsibility and Philosophical Moral Theories

OpenAIRE

Frederiksen, Claus S.

2009-01-01

This paper examines the relation between policies concerning Corporate Social Responsibility (CSR) and philosophical moral theories. The objective is to determine which moral theories form the basis for CSR policies. Are they based on ethical egoism, libertarianism, utilitarianism or some kind of common-sense morality? To address this issue, I conducted an empirical investigation examining the relation between moral theories and CSR policies, in companies engaged in CSR. Based ...

On thin ice: the fight over health and safety concerns, Inuit birthright quotas and allegations of a cover-up at the Arctic's most toxic waste site

Energy Technology Data Exchange (ETDEWEB)

Vitello, C.

2000-01-01

An account is given of working conditions and occupational safety hazards in decontaminating the most toxic waste site in the Canadian Arctic at Resolution Island in Nunavut which was the site of a former American military base. Its peacetime legacy is a mix of hazardous chemicals and contaminated soil, including the highest polychlorinated biphenyls (PCB) levels in the north of the 69th Parallel - up to 8,000 parts per million. The US military abandoned the site and left behind huge diesel tanks, residential buildings, equipment, furniture, electrical capacitors and transformers. The plans for decontamination were to remove the contaminants that are leaching into the soil and water, especially those that contain PCBs. The island contains approximately 4,000 cubic m of soil contaminated with PCBs at concentrations above the federal limit of 50 ppm. There was an emphasis on hiring native Inuit staff and disagreements occurred about numerous health and safety violations as well as questions concerning the qualifications of management personnel to oversee the cleanup. Examples of such violations are cited in relation to charges about inadequate employee qualifications. A critical safety report stated that the on-site communications methods were not sufficiently systematic, effective or understood, and that improvements were needed. Incidents of safety accidents and hazards are cited, as well as allegations of a federal government report as an attempt to cover up the problems.

A new approach to determine the environmental qualification requirements for the safety related equipment

International Nuclear Information System (INIS)

Hasnaoui, C.; Parent, G.

2000-01-01

The objective of the environmental qualification of safety related equipment is to ensure that the plant defense-in-depth is not compromised by common mode failures following design basis accidents with a harsh environment. A new approach based on safety functions has been developed to determine what safety-related equipment is required to function during and after a design basis accident, as well as their environmental qualification requirements. The main feature of this approach is to use auxiliary safety functions established from safety requirements as credited in the safety analyses. This approach is undertaken in three steps: identification of the auxiliary safety functions of each main safety function; determination of the main equipment groups required for each auxiliary safety function; and review of the safety analyses for design basis accidents in order to determine the credited auxiliary safety functions and their mission times for each accident scenario. Some of the benefits of the proposed approach for the determination of the safety environmental qualification requirements are: a systematic approach for the review of safety analyses based on a safety function check list, and the insurance, with the availability of the safety functions, that Gentilly-2 defense-in-depth would not be compromised by design basis accidents with a harsh environment. (author)

Impact of pre-conditioning on the qualification of safety-related equipment

International Nuclear Information System (INIS)

Isgro, J.R.

1982-01-01

This paper shares some recent experiences on the effects of preconditioning on the qualification of safety-related equipment not located in a harsh environment. Environmental and seismic qualification testing programs were conducted following the guidelines of IEEE 323-1974, IEEE 344-1975 and appropriate IEEE daughter standards, where available. The examples that follow will illustrate the degree of pre-conditioning of safety-related equipment qualified to the requirements of IEEE-323-1974, and its effect on the outcome of the qualification program

International views on nuclear safety

International Nuclear Information System (INIS)

Birkhofer, A.

2002-01-01

Safety has always been an important objective in nuclear technology. Starting with a set of sound physical principles and prudent design approaches, safety concepts have gradually been refined and cover now a wide range of provisions related to design, quality and operation. Research, the evaluation of operating experiences and probabilistic risk assessments constitute an essential basis and international co-operation plays a significant role in that context. Concerning future developments a major objective for new reactor concepts, such as the EPR, is to practically exclude a severe core damage accident with large scale consequences outside the plant. (author)

Safety issues relating to the design of fusion power facilities

International Nuclear Information System (INIS)

Stasko, R.R.; Wong, K.Y.; Russell, S.B.

1986-06-01

In order to make fusion power a viable future source of energy, it will be necessary to ensure that the cost of power for fusion electric generation is competitive with advanced fission concepts. In addition, fusion power will have to live up to its original promise of being a more radiologically benign technology than fission, and be able to demonstrate excellent operational safety performance. These two requirements are interrelated, since the selection of an appropriate safety philosophy early in the design phase could greatly reduce or eliminate the capital costs of elaborate safety related and protective sytems. This paper will briefly overview a few of the key safety issues presently recognized as critical to the ultimate achievement of licensable, environmentally safe and socially acceptable fusion power facilities. 12 refs

Health-related quality of life and existential concerns among patients with end-stage renal disease

Directory of Open Access Journals (Sweden)

Samir Bele

2012-01-01

Full Text Available Background : Health-Related Quality Of Life (HRQOL among patients with End-Stage Renal Disease (ESRD is significantly impacted by virtue of varied disease or treatment-related factors, and its evaluation along with existential concerns is required for providing comprehensive care to the patient. Aim : The aim of this study was to describe the various dimensions of HRQOL and existential concerns and to examine the relationship between the two among patients with ESRD. Materials and Methods : A cross-sectional descriptive study was conducted among 54 patients with ESRD undergoing maintenance hemodialysis in a teaching hospital. A semi-structured questionnaire was used to assess socio-demographic characteristics and existential concerns of the respondents. The HRQOL was evaluated using a standardized scale of Kidney Disease Quality of Life-Short Form (KDQOL-SF™ questionnaire. Data were presented as frequencies, mean ± Standard Deviation (SD for baseline characteristics and scores. Pearson correlation was used to study the association between various domains of quality of life and existential concerns. Results : Among HRQOL, the worst results obtained were in the domain of burden of kidney disease (33.45 ± 13.53, work status (49.07 ± 24.75, quality of social interaction (62.22 ±11.80, general health (43.06 ± 13.01, and physical functioning (47.50 ± 18.88. Disrupted personal integrity (12.80 ± 2.81 and loss of continuity (5.37 ± 1.17 were most bothersome existential concerns. A co-relational model behaves distinctly eliciting weak to strong association among various domains of HRQOL and existential concerns. Conclusion : Patients with ESRD reported impaired HRQOL in most of the domains. Existential concerns are distinguished as important dimensions of HRQOL. Association between HRQOL and existential concerns showed that these dimensions are distinct, and there is a need for assessing and attending these entities through a multidisciplinary

Development of FPGA-based safety-related instrumentation and control systems

Energy Technology Data Exchange (ETDEWEB)

Oda, N.; Tanaka, A.; Izumi, M.; Tarumi, T.; Sato, T. [Toshiba Corporation, Isogo Nuclear Engineering Center, Yokohama (Japan)

2004-07-01

Toshiba has developed systems which perform signal processing by field programmable gate arrays (FPGA) for safety-related instrumentation and control systems. FPGA is a device which consists only of defined digital circuit: hardware, which performs defined processing. FPGA-based system solves issues existing both in the conventional systems operated by analog circuits (analog-based system) and the systems operated by central processing units (CPU-based system). The advantages of applying FPGA are to keep the long-life supply of products, improving testability (verification), and to reduce the drift which may occur in analog-based system. Considering application to safety-related systems, nonvolatile and non rewritable FPGA which is impossible to be changed after once manufactured has been adopted in Toshiba FPGA-based system. The systems which Toshiba developed this time are Power range Monitor (PRM) and Trip Module (TM). These systems are compatible with the conventional analog-based systems and the CPU-based systems. Therefore, requested cost for upgrading will be minimized. Toshiba is planning to expand application of FPGA-based technology by adopting this development method to the other safety-related systems from now on. (authors)

Annual Safety Report 1981

International Nuclear Information System (INIS)

1982-09-01

A safety report from Section K (Nuclear Physics) of the Dutch National Institute for Nuclear and High Energy Physics is presented for 1981. The report begins with general matters concerning safety policy at NIKHEF, licences and expenditure. Works accidents (none of them radiological) are detailed and accident prevention considered. The measurement programme for neutron radiation in the vicinity of the accelerator is described and the results are discussed. The means and results of personnel dosimetry are also presented. The report is concluded with a list of publications concerning safety aspects at NIKHEF. (C.F.)

Characteristics of self-rating and rating by others of safety behavior

International Nuclear Information System (INIS)

Fukui, Hirokazu; Yoshida, Michio; Sugiman, Toshio; Watanabe, Toshie

2002-01-01

It is known that in questionnaire surveys in general, behavior that are recognized as socially desirable are more highly rated by the actors themselves than by others. Safety behavior can be viewed as behavior closely related to social desirability. Therefore, in the present study, multiple regression analysis was conducted to examine how the self-rating and rating by others of 'safety confirmation/report', which serves as one of the rating scales of safety climate and criterion for safety behavior rating, are related to other factors of safety climate. The analysis results reveal that the self-rating of 'safety confirmation/report' tends to give better scores than rating by others and is more strongly related to individual factors than organizational environmental factors. Meanwhile, the rating by others of safety confirmation/report' is strongly related to organizational environmental factors and demonstrates little or no link with individual factors. It can be said, therefore, that the rating by others of 'safety confirmation/report' reflects more accurately the influence of the organizational environment concerned than self-rating, and hence is more appropriate as a rating scale for safety climate. (author)

Characteristics of self-rating and rating by others of safety behavior

Energy Technology Data Exchange (ETDEWEB)

Fukui, Hirokazu [Institute of Nuclear Safety System, Inc., Mihama, Fukui (Japan); Yoshida, Michio; Sugiman, Toshio; Watanabe, Toshie [Japan Institute for Group Dynamics, Fukuoka (Japan)

2002-09-01

It is known that in questionnaire surveys in general, behavior that are recognized as socially desirable are more highly rated by the actors themselves than by others. Safety behavior can be viewed as behavior closely related to social desirability. Therefore, in the present study, multiple regression analysis was conducted to examine how the self-rating and rating by others of 'safety confirmation/report', which serves as one of the rating scales of safety climate and criterion for safety behavior rating, are related to other factors of safety climate. The analysis results reveal that the self-rating of 'safety confirmation/report' tends to give better scores than rating by others and is more strongly related to individual factors than organizational environmental factors. Meanwhile, the rating by others of safety confirmation/report' is strongly related to organizational environmental factors and demonstrates little or no link with individual factors. It can be said, therefore, that the rating by others of 'safety confirmation/report' reflects more accurately the influence of the organizational environment concerned than self-rating, and hence is more appropriate as a rating scale for safety climate. (author)

Nuclear regulatory guides for LWR (PWR) fuel in Japan and some related safety research

International Nuclear Information System (INIS)

Ichikawa, M.

1994-01-01

The general aspects of licensing procedure for NPPs in Japan and regulatory guides are described. The expert committee reports closely related to PWR fuel are reviewed. Some major results of reactor safety research experiments at NSPR (Nuclear Safety Research Reactor of JAERI) used for establishment of related guide, are discussed. It is pointed out that the reactor safety research in Japan supports the regularity activities by establishing and revising guides and preparing the necessary regulatory data as well as improving nuclear safety. 10 figs., 4 refs

Nuclear regulatory guides for LWR (PWR) fuel in Japan and some related safety research

Energy Technology Data Exchange (ETDEWEB)

Ichikawa, M [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan)

1994-12-31

The general aspects of licensing procedure for NPPs in Japan and regulatory guides are described. The expert committee reports closely related to PWR fuel are reviewed. Some major results of reactor safety research experiments at NSPR (Nuclear Safety Research Reactor of JAERI) used for establishment of related guide, are discussed. It is pointed out that the reactor safety research in Japan supports the regularity activities by establishing and revising guides and preparing the necessary regulatory data as well as improving nuclear safety. 10 figs., 4 refs.

Substance use and social, health and safety-related factors among fatally injured drivers.

Science.gov (United States)

Karjalainen, Karoliina; Blencowe, Tom; Lillsunde, Pirjo

2012-03-01

The aim of this study was to examine different socio-demographic, health and safety-related factors, and psychoactive substance use among fatally injured drivers in road traffic accidents in Finland during 2006-2008. An accident information register maintained by the Traffic Safety Committee of Insurance Companies (VALT) of the Finnish Motor Insurers' Centre was used as basic data, and the basic data were complemented with further toxicological analytical information retrieved from autopsy reports from the Department of Forensic Medicine, Helsinki University. The data included all the drivers (n=556) who were driving a motor vehicle and who died in a road traffic accident in Finland during 2006-2008. Of all the 556 fatally injured drivers 43% (n=238) had psychoactive substance findings. 51% (n=121) of substance positive drivers had a finding for alcohol only, the rest had a finding for one or more illicit/medicinal drugs impairing driving ability, and possibly also alcohol. Fatally injured drivers with alcohol findings were significantly younger (mean age 34 years) than sober drivers (mean age 44 years) or drivers with findings for drugs (mean age 45 years). Socio-demographic background did not differ substantially among drunken/drugged and sober drivers, although drivers with alcohol findings had a slightly lower education and socioeconomic position. Previous substance abuse problems were highly prevalent among drivers with substance findings and mental or both mental and physical health problems were more common among drivers with drug findings. The non-use of safety equipment and driving at a high speed were more common among fatally injured drivers with substance findings. Substance abuse and mental health problems, as well as reckless driving behavior were more pronounced among fatally injured drivers with substance findings when compared to sober drivers. Thus, prevention and early intervention concerning substance abuse, mental health problems and DUI are

Preservation of FFTF Data Related to Passive Safety Testing

International Nuclear Information System (INIS)

Wootan, David W.; Butner, R. Scott; Omberg, Ronald P.; Makenas, Bruce J.; Nielsen, Deborah L.

2010-01-01

One of the goals of the Fuel Cycle Research and Development Program (FCRD) is to preserve the knowledge that has been gained in the United States on Liquid Metal Reactors (LMR). A key area deserving special attention for preservation is the data relating to passive safety testing that was conducted in FFTF and EBR-II during the 1980's. Accidents at Unit 4 of the Chernobyl Station and Unit 2 at Three Mile Island changed the safety paradigm of the nuclear power industry. New emphasis was placed on assured safety based on intrinsic plant characteristics that protect not only the public, but the significant investment in the plant as well. Plants designated to perform in this manner are considered to be passively safe since no active sensor/alarm system or human intervention is required to bring the reactor to a safe shutdown condition. The liquid metal reactor (LMR) has several key characteristics needed for a passively safe reactor: reactor coolant with superior heat transfer capability and very high boiling point, low (atmospheric) system pressures, and reliable negative reactivity feedback. The credibility of the design for a passively safe LMR rests on two issues: the validity of analytic methods used to predict passive safety performance and the availability of relevant test data to calibrate design tools. Safety analysis methods used to analyze LMRs under the old safety paradigm were focused on calculating the source term for the Core Disruptive Accident. Passive safety design requires refined analysis methods for transient events because treatment of the detailed reactivity feedbacks is important in predicting the response of the reactor. Similarly, analytic tools should be calibrated against actual test experience in existing LMR facilities. The principal objectives of the combined FFTF natural circulation and Passive Safety Testing program were: (1) to verify natural circulation as a reliable means to safely remove decay heat, (2) to extend passive safety

Report on safety related occurrences and reactor trips July 1, 1976-December 31, 1976

International Nuclear Information System (INIS)

Andermo, L.

1977-04-01

This is a systematically arranged report on all reported safety related occurrences and reactor trips in Swedish nuclear power plants in operation during July 1, 1976 to December 31, 1976 inclusive. The facilities involved are Oskarshamn 1 and 2, Ringhals 1 and 2 and Barsebaeck 1. During this period of the 6 months 37 safety related occurrences and 34 reactor trips have been reported to the Nuclear Power Inspectorate. As earlier experiences have shown it is to the greatest extent the conventional components which bring about the safety related occurrences or occurrences leading to outages or power reductions. However, the component errors discovered in the safety related systems have not affected the function of their redundant systems and other diverse systems have not been involved. Therefore the reactor safety has been satisfactory. The fact that even small deviations from prescribed operation results in automatic and safe shut down of the reactor, does not always imply a conflict with operational availability. The number of reactor trips are almost as low as during the last period, which is a drastic reduction compared to earlier time periods. The greatest outages are caused by occurrences without safety significance.(author)

Manual on quality assurance for computer software related to the safety of nuclear power plants

International Nuclear Information System (INIS)

1988-01-01

The objective of the Manual is to provide guidance in the assurance of quality of specification, design, maintenance and use of computer software related to items and activities important to safety (hereinafter referred to as safety related) in nuclear power plants. This guidance is consistent with, and supplements, the requirements and recommendations of Quality Assurance for Safety in Nuclear Power Plants: A Code of Practice, 50-C-QA, and related Safety Guides on quality assurance for nuclear power plants. Annex A identifies the IAEA documents referenced in the Manual. The Manual is intended to be of use to all those who, in any way, are involved with software for safety related applications for nuclear power plants, including auditors who may be called upon to audit management systems and product software. Figs

Smooth handling: the lack of safety-related consumer information in car advertisements.

Science.gov (United States)

Wilson, Nick; Maher, Anthony; Thomson, George; Keall, Michael

2007-10-01

To examine the content and trends of safety-related consumer information in magazine vehicle advertisements, as a case study within the worldwide marketing of vehicles. Content analysis of popular current affairs magazines in New Zealand for the 5-year period 2001-2005 was undertaken (n = 514 advertisements), supplemented with vehicle data from official websites. Safety information in advertisements for light passenger vehicles was relatively uncommon with only 27% mentioning one or more of nine key safety features examined (average: 1.7 out of nine features in this 27%). Also included were potentially hazardous features of: speed imagery (in 29% of advertisements), power references (14%), and acceleration data (4%). The speed and power aspects became relatively more common over the 5-year period (p advertisements and vehicle marketing - as already occurs with many other consumer products.

Regulatory oversight report 2012 concerning nuclear safety in Swiss nuclear installations

International Nuclear Information System (INIS)

2013-04-01

The Swiss Federal Nuclear Safety Inspectorate (ENSI) assesses and monitors nuclear facilities in Switzerland. These include the five nuclear power plants, the interim storage facilities based at each plant, the Central Interim Storage Facility (ZWILAG) and the nuclear facilities at the Paul Scherrer Institute (PSI), at the Federal Institute of Technology in Lausanne (EPFL) and at the University of Basel. Using a combination of inspections, regulatory meetings, examinations and analyses together with reports from the licensees of individual facilities, ENSI obtains the required overview of nuclear safety in the relevant facilities. It ensures that the facilities comply with the regulations and operate as required by law. Its regulatory responsibilities also include the transport of radioactive materials from and to nuclear facilities and the preparations for a deep geological repository for nuclear waste. ENSI maintains its own emergency organisation. It formulates and updates its own guidelines which stipulate the criteria for evaluating the current activities and future plans of the operators of nuclear facilities. ENSI produces regular reports on its regulatory activities and nuclear safety in Swiss nuclear facilities. It fulfils its statutory obligation to provide the public with information on particular events and findings in nuclear facilities. In 2012, the five nuclear power plants in Switzerland were all operated safely. 34 events were reported; on the international INES scale of 0 to 7, ENSI rated 33 events as Level 0 and 1 as Level 1. ENSI evaluates the safety of each nuclear power plant as part of a systematic safety evaluation taking account of both reportable events and other findings, in particular the results of more than 400 inspections conducted by ENSI during 2012. ZWILAG consists of several interim storage halls, a conditioning plant and an incineration/melting plant. At the end of 2012, the cask storage hall contained 40 transport/storage casks

The use of probabilistic safety assessment based maintenance indicators to increase the availability of safety related systems in nuclear power plants

International Nuclear Information System (INIS)

Kirchsteiger, C.

1991-04-01

This work describes the theoretical development of a Probabilistic Safety Assessment (PSA) based Performance Indicator (PI) model for a comprehensive Maintenance Efficiency Analysis (MEA) and its practical application to past operational history data of a certain Nuclear Power Plant. Plant specific equipment history and maintenance work order data have been collected and analysed using various advanced statistical procedures (nonparametric methods, multivariate analysis) in order to be able to estimate safety system related equipment and maintenance process trends. The main results of such a MEA case study are the trends in the (in)effectiveness of the performance of a selected safety system and its dominant maintenance related causes of its bad (good) equipment performance. Finally, the therefrom gained results are used to propose a new set of safety system based and maintenance related Performance Indicators, including suggestions for a corresponding plant specific maintenance data collection system. (author)

Simulation experiments concerning functioning tests of technical safety devices with process computers. Pt. 2

International Nuclear Information System (INIS)

Hawickhorst, W.

1976-12-01

Computerized inspection techniques of engineered safety systems improve the diagnosis capability, relative to the presently used techniques, even if anticipated system disturbances can only be qualitatively predicted. To achieve this, the system to be inspected must be partitioned into small subsystems, which can be treated independently from each other. This report contains the formulation of a standardized inspection concept based on system decomposition. Its performance is discussed by means of simulation experiments. (orig.) [de

A symmetric safety valve

International Nuclear Information System (INIS)

Burtraw, Dallas; Palmer, Karen; Kahn, Danny

2010-01-01

How to set policy in the presence of uncertainty has been central in debates over climate policy. Concern about costs has motivated the proposal for a cap-and-trade program for carbon dioxide, with a 'safety valve' that would mitigate against spikes in the cost of emission reductions by introducing additional emission allowances into the market when marginal costs rise above the specified allowance price level. We find two significant problems, both stemming from the asymmetry of an instrument that mitigates only against a price increase. One is that most important examples of price volatility in cap-and-trade programs have occurred not when prices spiked, but instead when allowance prices collapsed. Second, a single-sided safety valve may have unintended consequences for investment. We illustrate that a symmetric safety valve provides environmental and welfare improvements relative to the conventional one-sided approach.

Body image concern and selective attention to disgusting and non-self appearance-related stimuli.

Science.gov (United States)

Onden-Lim, Melissa; Wu, Ray; Grisham, Jessica R

2012-09-01

Although selective attention to one's own appearance has been widely documented in studies of body dysmorphic disorder (BDD), little is known about attentional bias toward non-self appearance-related stimuli in BDD. Furthermore, despite reports of heightened experience of disgust in BDD, it is unknown whether these individuals differentially attend to disgusting stimuli and whether disgust is important in processing of unattractive stimuli. We used a dot probe procedure to investigate the relationship between dysmorphic concern, a defining feature of BDD, and selective attention to faces, attractive, unattractive and disgusting images in a female heterosexual student population (N=92). At the long stimulus presentation (1000 ms), dysmorphic concern was positively associated with attention to faces in general and attractive appearance-related images. In contrast, at the short stimulus presentation (200 ms), there was a positive association between dysmorphic concern and disgusting images. Implications for theoretical models of BDD are discussed. Copyright © 2012. Published by Elsevier Ltd.

Regulatory oversight report 2008 concerning nuclear safety in Swiss nuclear installations

International Nuclear Information System (INIS)

2009-04-01

This annual report issued by the Swiss Federal Nuclear Inspectorate (ENSI) reports on the work carried out by the Inspectorate in 2008. This report reviews the regulatory activities in the four Swiss nuclear power stations and in four further nuclear installations in various Swiss research facilities. It deals with topics such as operational details, technologies in use, radiation protection, radioactive wastes, emergency dispositions, personnel and provides an assessment of operations from the safety point of view. Also, the transportation of nuclear materials - both nuclear fuels and nuclear wastes - is reported on. General topics discussed include probabilistic safety analyses and accident management, earthquake damage analysis and agreements on nuclear safety. The underground disposal of highly-radioactive nuclear wastes and work done in the rock laboratories are discussed, as are proposals for additional nuclear power stations

Identification of road user related risk factors, Deliverable 5.1 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Filtness, A. & Papadimitriou, E. (Eds.) Leskovšek, B. Focant, N. Martensen, H. Sgarra, V. Usami, D.S. Soteropoulos, A. Stadlbauer, S. Theofilatos, A. Yannis, G. Ziakopoulos, A. Diamandouros, K. Durso, C. Goldenbeld, C. Loenis, B. Schermers, G. Petegem, J.-H. van Elvik, R. Hesjevoll, I.S. Quigley, C. & Papazikou, E.

2017-01-01

The present Deliverable (D5.1) describes the identification and evaluation of infrastructure related risk factors. It outlines the results of Task 5.1 of WP5 of SafetyCube, which aimed to identify and evaluate infrastructure related risk factors and related road safety problems by (i) presenting a

TMI 2 and safety culture. Lessons still to be learned

International Nuclear Information System (INIS)

Werdine, H.

1998-01-01

This paper will deal with some concerns related to the actual ''status-quo'' of the nuclear industry related to nuclear safety. It is well understood that incredible progresses have been made in this subject not only by the industries, but mainly by the International Organisations such as INPO, WANO, IAEA and others. Of course, there could be some misunderstanding and corrections here and there, and now I am talking about the WANO Mission last year in Chernobyl. But this subject is not the objective of my paper. This paper deals with a concern. I am worried with the actual status of a ''potential relative'' complacency with some very important safety principles that could be permeating throughout the nuclear industry. I will try to develop this idea and propose some actions to counteract the facts; what we did at Angra 1 and within ELETRONUCLEAR to face those challenges. (author)

Environmental contaminants of emerging concern in seafood--European database on contaminant levels.

Science.gov (United States)

Vandermeersch, Griet; Lourenço, Helena Maria; Alvarez-Muñoz, Diana; Cunha, Sara; Diogène, Jorge; Cano-Sancho, German; Sloth, Jens J; Kwadijk, Christiaan; Barcelo, Damia; Allegaert, Wim; Bekaert, Karen; Fernandes, José Oliveira; Marques, Antonio; Robbens, Johan

2015-11-01

Marine pollution gives rise to concern not only about the environment itself but also about the impact on food safety and consequently on public health. European authorities and consumers have therefore become increasingly worried about the transfer of contaminants from the marine environment to seafood. So-called "contaminants of emerging concern" are chemical substances for which no maximum levels have been laid down in EU legislation, or substances for which maximum levels have been provided but which require revision. Adequate information on their presence in seafood is often lacking and thus potential risks cannot be excluded. Assessment of food safety issues related to these contaminants has thus become urgent and imperative. A database (www.ecsafeseafooddbase.eu), containing available information on the levels of contaminants of emerging concern in seafood and providing the most recent data to scientists and regulatory authorities, was developed. The present paper reviews a selection of contaminants of emerging concern in seafood including toxic elements, endocrine disruptors, brominated flame retardants, pharmaceuticals and personal care products, polycyclic aromatic hydrocarbons and derivatives, microplastics and marine toxins. Current status on the knowledge of human exposure, toxicity and legislation are briefly presented and the outcome from scientific publications reporting on the levels of these compounds in seafood is presented and discussed. Copyright © 2015 Elsevier Inc. All rights reserved.

SAFETY

CERN Multimedia

Niels Dupont

2013-01-01

CERN Safety rules and Radiation Protection at CMS The CERN Safety rules are defined by the Occupational Health & Safety and Environmental Protection Unit (HSE Unit), CERN’s institutional authority and central Safety organ attached to the Director General. In particular the Radiation Protection group (DGS-RP1) ensures that personnel on the CERN sites and the public are protected from potentially harmful effects of ionising radiation linked to CERN activities. The RP Group fulfils its mandate in collaboration with the CERN departments owning or operating sources of ionising radiation and having the responsibility for Radiation Safety of these sources. The specific responsibilities concerning "Radiation Safety" and "Radiation Protection" are delegated as follows: Radiation Safety is the responsibility of every CERN Department owning radiation sources or using radiation sources put at its disposition. These Departments are in charge of implementing the requi...

Value-impact assessment of safety-related modifications

International Nuclear Information System (INIS)

Knowles, W.M.C.; Dinnie, K.S.; Gordon, C.W.

1992-01-01

Like other nuclear utilities, Ontario Hydro, as part of its risk management activities, continually assesses the safety of its nuclear operations. In addition, new regulatory requirements are being applied to the older nuclear power plants. Both of these result in proposed plant modifications designed to reduce the risk to the public. However, modifications to an operating plant can have serious economic effects, and the resources, both financial and personnel, required for the implementation of these modifications are limited. Thus, all potential benefits and effects of a proposed modification must be thoroughly investigated to judge whether the modification is beneficial. Ontario Hydro has begun to use comprehensive value-impact assessments, utilizing plant-specific probabilistic risk assessments (PRAs), as tools to provide an informed basis for judgments on the benefit of safety-related modifications. The results from value-impact assessments can also be used to prioritize the implementation of these modifications

Ethical concerns and career satisfaction in obstetrics and gynecology: a review of recent findings from the Collaborative Ambulatory Research Network.

Science.gov (United States)

Farrow, Victoria A; Leddy, Meaghan A; Lawrence, Hal; Schulkin, Jay

2011-09-01

Obstetricians-gynecologists (ob-gyns) are frequently confronted with situations that have ethical implications (e.g., whether to accept gifts or samples from drug companies or disclosing medical errors to patients). Additionally, various factors, including specific job-related tasks, costs, and benefits, may impact ob-gyns' career satisfaction. Ethical concerns and career satisfaction can play a role in the quality of women's health care. This article summarizes the studies published between 2005 and 2009 by the Research Department of the American College of Obstetricians and Gynecologists, which encompass ethical concerns regarding interactions with pharmaceutical representatives and patient safety/medical error reporting, as well as ob-gyn career satisfaction. Additionally, a brief discussion regarding ethical concerns in the ob-gyn field, in general, highlights key topics for the last 30 years. Ethical dilemmas continue to be of concern for ob-gyns. Familiarity with guidelines on appropriate interactions with industry is associated with lower percentages of potentially problematic relationships with pharmaceutical industries. Physicians report that the expense of patient safety initiatives is one of the top barriers for improving patient safety, followed by fear of liability. Overall, respondents reported being satisfied with their careers. However, half of the respondents reported that they were extremely concerned about the impact of professional liability costs on the duration of their careers. Increased familiarity with guidelines may lead to a decreased ob-gyn reliance on pharmaceutical representatives and free samples, whereas specific and practical tools may help them implement patient safety techniques. The easing of malpractice insurance and threat of litigation may enhance career satisfaction among ob-gyns. This article will discuss related findings in recent years. Obstetricians & Gynecologists and Family Physicians. After the completing the CME

Safety assessment and regulatory strategy for NPP I and C modernization projects

International Nuclear Information System (INIS)

Manners, S.; Blocquel, Ch.

1999-10-01

IPSN is the technical support for the French nuclear safety authority (DSIN), but also acts independently. Through our participation at this IAEA meeting we wish to further our appreciation of the industry position for I and C modernization projects. We will present some of the concerns of the safety assessor and safety authority for such projects. We hope to share our experiences and views concerning current strategies for I and C modernization and licensing from. In our experience with NPP I and C programmes, the need for modification is most often not directly linked to safety. For our safety assessment we have to identify clearly and, as far as possible, categorize the safety relevance of the specified modifications and all safety impact in its implementation. Modernization can be simply for reasons of replacement of obsolete existing equipment or it can be linked to functional evolutions; safety functions may be directly or indirectly affected. The state of the art I and C solutions proposed by today's modernization programs have many benefits, but also pose a certain number of difficulties for the safety demonstration. On the implementation side, the safety assessment for a modernization project has to take into consideration specific issues compared with that for new plant. These include interface and compatibility with the existing installation, issues relating to 'on line' installation and commissioning, as well as operational issues concerning the changeover and trail periods. A further subject for discussion concerns how our regulatory requirements apply to modernization. We must as a minima comply with the requirements of the period. To what measure must we apply current or future (under development or for future reactor designs) standards? How can we tie in with requirements and legislation for new projects? Do we make a special case for back-fits? (authors)

Safety assessment and regulatory strategy for NPP I and C modernization projects

Energy Technology Data Exchange (ETDEWEB)

Manners, S.; Blocquel, Ch

1999-10-01

IPSN is the technical support for the French nuclear safety authority (DSIN), but also acts independently. Through our participation at this IAEA meeting we wish to further our appreciation of the industry position for I and C modernization projects. We will present some of the concerns of the safety assessor and safety authority for such projects. We hope to share our experiences and views concerning current strategies for I and C modernization and licensing from. In our experience with NPP I and C programmes, the need for modification is most often not directly linked to safety. For our safety assessment we have to identify clearly and, as far as possible, categorize the safety relevance of the specified modifications and all safety impact in its implementation. Modernization can be simply for reasons of replacement of obsolete existing equipment or it can be linked to functional evolutions; safety functions may be directly or indirectly affected. The state of the art I and C solutions proposed by today's modernization programs have many benefits, but also pose a certain number of difficulties for the safety demonstration. On the implementation side, the safety assessment for a modernization project has to take into consideration specific issues compared with that for new plant. These include interface and compatibility with the existing installation, issues relating to 'on line' installation and commissioning, as well as operational issues concerning the changeover and trail periods. A further subject for discussion concerns how our regulatory requirements apply to modernization. We must as a minima comply with the requirements of the period. To what measure must we apply current or future (under development or for future reactor designs) standards? How can we tie in with requirements and legislation for new projects? Do we make a special case for back-fits? (authors)

Developing patient safety in dentistry.

Science.gov (United States)

Pemberton, M N

2014-10-01

Patient safety has always been important and is a source of public concern. Recent high profile scandals and subsequent reports, such as the Francis report into the failings at Mid Staffordshire, have raised those concerns even higher. Mortality and significant morbidity associated with the practice of medicine has led to many strategies to help improve patient safety, however, with its lack of associated mortality and lower associated morbidity, dentistry has been slower at systematically considering how patient safety can be improved. Recently, several organisations, researchers and clinicians have discussed the need for a patient safety culture in dentistry. Strategies are available to help improve patient safety in healthcare and deserve further consideration in dentistry.

Phenomenology of men with body dysmorphic disorder concerning penis size compared to men anxious about their penis size and to men without concerns: a cohort study.

Science.gov (United States)

Veale, David; Miles, Sarah; Read, Julie; Troglia, Andrea; Carmona, Lina; Fiorito, Chiara; Wells, Hannah; Wylie, Kevan; Muir, Gordon

2015-03-01

Men with body dysmorphic disorder (BDD) may be preoccupied with the size or shape of the penis, which may be causing significant shame or impairment. Little is known about the characteristics and phenomenology of such men and whether they can be differentiated from men with small penis anxiety (SPA) (who do not have BDD), and men with no penile concerns. Twenty-six men with BDD, 31 men with SPA, and 33 men without penile concerns were compared on psychopathology, experiences of recurrent imagery, avoidance and safety-seeking behaviours. Men with BDD had significantly higher scores than both the SPA group and no penile concern group for measures of imagery, avoidance, safety seeking and general psychopathology. The groups differed on the phenomenology of BDD specific to penile size preoccupation clearly from the worries of SPA, which in turn were different to those of the men without concerns. The common avoidance and safety seeking behaviours were identified in such men that may be used clinically. Copyright © 2014 Elsevier Ltd. All rights reserved.

Official News relating to CERN Safety Rules

CERN Multimedia

HSE Unit

2015-01-01

The CERN Safety Rules listed below have been published on the HSE website (see here) and entered into force on the 9 June 2015:   Safety Regulation SR-M “Mechanical equipment”: http://cern.ch/safety-rules/SR-M_ENv2.htm; this SR-M (version 2) cancels and replaces SR-M (version 1) and the corresponding provisions of General Safety Instruction GSI-M3 “Special Equipment” (version 1).   General Safety Instruction GSI-M-1 “Lifting equipment and accessories”: http://cern.ch/safety-rules/GSI-M-1_ENv2.htm; this GSI-M-1 (version 2) cancels and replaces GSI-M1 (version 1). Specific Safety Instruction SSI-M-1-1 “Slings and lifting chains”: http://cern.ch/safety-rules/SSI-M-1-1_EN.htm; Specific Safety Instruction SSI-M-1-2 “Cranes, bridge cranes, gantry cranes and power-driven hoists”: http://cern.ch/safety-rules/SSI-M-1-2_EN.htm; Specific Safety Instruction SSI-M-1-3 “Non-f...

Industrial safety in power plants

International Nuclear Information System (INIS)

1987-01-01

The proceedings of the VGB conference 'Industrial safety in power plants' held in the Gruga-Halle, Essen on January 21 and 22, 1987, contain the papers reporting on: Management responsibility for and legal consequences of industrial safety; VBG 2.0 Industrial Accident Prevention Regulation and the power plant operator; Operational experience gained with wet-type flue gas desulphurization systems; Flue gas desulphurization systems: Industrial-safety-related requirements to be met in planning and operation; the effects of the Hazardous Substances Ordinance on power plant operation; Occupational health aspects of heat-exposed jobs in power plants; Regulations of the Industrial Accident Insurance Associations concerning heat-exposed jobs and industrial medical practice; The new VBG 30 Accident Prevention Regulation 'Nuclear power plants'; Industrial safety in nuclear power plants; safe working on and within containers and confined spaces; Application of respiratory protection equipment in power plants. (HAG) [de

Nuclear safety in Slovak Republic. Regulatory aspects of NPP nuclear safety

International Nuclear Information System (INIS)

Lipar, M.

1999-01-01

Regulatory Authority (UJD) is appointed by the Slovak Republic National Council as an Executive Authority for nuclear safety supervision. Nuclear safety legislation, organisation and resources of UJD, its role and responsibilities are described together with its inspection and licensing functions and International cooperation concerning improvements of safety effectiveness. Achievements of UJD are listed in detail

Social acceptance for seismic safety of nuclear installations

International Nuclear Information System (INIS)

Oiso, Shinichi

2010-01-01

The social acceptance of seismic safety of the nuclear installations was considered based on the situation that people's concern and anxieties for it having risen by earthquake suffering of the Kashiwazaki Kariwa facility in 2007, etc. It aimed mainly to extract a social awareness (acknowledgment and evaluation) which is peculiar to the earthquake in the field of nuclear power generation, and to show the attention point concerning the public relations of seismic safety of the nuclear power plant. As a result, it was suggested that we should explain based on the opinion of the third party which has a high trust such as specialist scholars, and emphasize that the severe examinations of outside third parties such as committee of the prefecture are conducted. (author)

Containment-emergency-sump performance. Technical findings related to Unresolved Safety Issue A-43

International Nuclear Information System (INIS)

1983-04-01

This report summarizes key technical findings related to the Unresolved Safety Issue A-43, Containment Emergency Sump Performance, and provides recommendations for resolution of attendant safety issues. The key safety questions relate to: (a) effects of insulation debris on sump performance; (b) sump hydraulic performance as determined by design features, submergence, and plant induced effects, and (c) recirculation pump performance wherein air and/or particulate ingestion can occur. The technical findings presented in this report provide information relevant to the design and performance evaluation of the containment emergency sump

Safety evaluation report related to Babcock and Wilcox Owners Group Plant Reassessment Program: [Final report

International Nuclear Information System (INIS)

1987-11-01

After the accident of Three Mile Island, Unit 2, nuclear power plant owners made a number of improvements to their nuclear facilities. Despite these improvements, the US Nuclear Regulatory Commission (NRC) staff is concerned that the number and complexity of events at Babcock and Wilcox (B and W) nuclear plants have not decreased as expected. This concern was reinforced by the June 9, 1985 total-loss-of-feedwater event at Davis-Besse Nuclear Power Station and the December 26, 1985 overcooling transient at Rancho Seco Nuclear Generating Station. By letter dated January 24, 1986, the Executive Director for Operations (EDO) informed the Chairman of the B and W Owners Group (BWOG) that a number of recent events at B and W-designed reactors have led the NRC staff to conclude that the basic requirements for B and W reactors need to be reexamined. In its February 13, 1986 response to the EDO's letter, the BWOG committed to lead an effort to define concerns relative to reducing the frequency of reactor trips and the complexity of post-trip response in B and W plants. The BWOG submitted a description of the B and W program entitled ''Safety and Performance Improvement Program'' (BAW-1919) on May 15, 1986. Five revisions to BAW-1919 have also been submitted. The NRC staff has reviewed BAW-1919 and its revisions and presents its evaluation in this report. 2 figs., 34 tabs

Safety issues related to the intermediate heat storage for the EU DEMO

Energy Technology Data Exchange (ETDEWEB)

Carpignano, Andrea [NEMO group, Dipartimento Energia, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino (Italy); Pinna, Tonio [ENEA, 00044 Frascati (Italy); Savoldi, Laura; Sobrero, Giulia; Uggenti, Anna Chiara [NEMO group, Dipartimento Energia, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino (Italy); Zanino, Roberto, E-mail: roberto.zanino@polito.it [NEMO group, Dipartimento Energia, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino (Italy)

2016-11-01

Highlights: • IHS affects only the PHTS and the BoP (Balance of Plant). • PIEs list does not change but IHS influences PIEs evolution. • Additional issues to be addressed in PIEs study due to the implementation of HIS. • No safety/operational major obstacles were found for IHS concept. - Abstract: The functional deviations able to compromise system safety in the EU DEMO Primary Heat Transfer System (PHTS) with intermediate heat storage (IHS) based on molten salts are identified and compared to the deviations identified with PHTS without IHS. The resulting safety issues for the Balance of Plant (BoP) have been taken into account. Functional Failure Mode and Effects Analysis (FFMEA) is used to highlight the Postulated Initiating Events (PIE) of incident/accident sequences and to provide some safety insights during the preliminary design. The architecture of the system with IHS does not introduce new PIE with respect to the case without IHS, but it modifies some of them. In particular the two Postulated Initiating Events that are affected by the presence of IHS are the LOCA in the tubes of the HX between primary and intermediate circuit and the loss of heat sink for the first wall or the breeding zone. In fact the IHS introduces some advantages concerning the stability of the secondary circuit, but some weaknesses are associated to the physical-chemical nature of molten salts, especially oxidizing power, corrosive nature and risk of solidification. These issues can be managed in the design by the introduction of new safety functions.

Safety Evaluation Report related to the operation of Comanche Peak Steam Electric Station, Units 1 and 2 (Docket Nos. 50-445 and 50-446). Supplement No. 8

International Nuclear Information System (INIS)

1985-02-01

Supplement 8 to the Safety Evaluation Report for the Texas Utilities Electric Company application for a license to operate Comanche Peak Steam Electric Station, Units 1 and 2 (Docket Nos. 50-445, 50-446), located in Somervell County, Texas, has been jointly prepared by the Office of Nuclear Reactor Regulation and the Comanche Peak Technical Review Team of the US Nuclear Regulatory Commission. This Supplement provides the results of the staff's evaluation and resolution of approximately 80 technical concerns and allegations relating to civil and structural and miscellaneous issues regarding construction and plant readiness testing practices at the Comanche Peak facility. Issues raised during recent Atomic Safety and Licensing Board hearings will be dealt with in future supplements to the Safety Evaluation Report

Promoting social responsibility amongst health care users: medical tourists’ perspectives on an information sheet regarding ethical concerns in medical tourism

Science.gov (United States)

2013-01-01

Background Medical tourists, persons that travel across international borders with the intention to access non-emergency medical care, may not be adequately informed of safety and ethical concerns related to the practice of medical tourism. Researchers indicate that the sources of information frequently used by medical tourists during their decision-making process may be biased and/or lack comprehensive information regarding individual safety and treatment outcomes, as well as potential impacts of the medical tourism industry on third parties. This paper explores the feedback from former Canadian medical tourists regarding the use of an information sheet to address this knowledge gap and raise awareness of the safety and ethical concerns related to medical tourism. Results According to feedback provided in interviews with former Canadian medical tourists, the majority of participants responded positively to the information sheet and indicated that this document prompted them to engage in further consideration of these issues. Participants indicated some frustration after reading the information sheet regarding a lack of know-how in terms of learning more about the concerns discussed in the document and changing their decision-making. This frustration was due to participants’ desperation for medical care, a topic which participants frequently discussed regarding ethical concerns related to health care provision. Conclusions The overall perceptions of former medical tourists indicate that an information sheet may promote further consideration of ethical concerns of medical tourism. However, given that these interviews were performed with former medical tourists, it remains unknown whether such a document might impact upon the decision-making of prospective medical tourists. Furthermore, participants indicated a need for an additional tool such as a website for continued discussion about these concerns. As such, along with dissemination of the information sheet

Promoting social responsibility amongst health care users: medical tourists' perspectives on an information sheet regarding ethical concerns in medical tourism.

Science.gov (United States)

Adams, Krystyna; Snyder, Jeremy; Crooks, Valorie A; Johnston, Rory

2013-12-06

Medical tourists, persons that travel across international borders with the intention to access non-emergency medical care, may not be adequately informed of safety and ethical concerns related to the practice of medical tourism. Researchers indicate that the sources of information frequently used by medical tourists during their decision-making process may be biased and/or lack comprehensive information regarding individual safety and treatment outcomes, as well as potential impacts of the medical tourism industry on third parties. This paper explores the feedback from former Canadian medical tourists regarding the use of an information sheet to address this knowledge gap and raise awareness of the safety and ethical concerns related to medical tourism. According to feedback provided in interviews with former Canadian medical tourists, the majority of participants responded positively to the information sheet and indicated that this document prompted them to engage in further consideration of these issues. Participants indicated some frustration after reading the information sheet regarding a lack of know-how in terms of learning more about the concerns discussed in the document and changing their decision-making. This frustration was due to participants' desperation for medical care, a topic which participants frequently discussed regarding ethical concerns related to health care provision. The overall perceptions of former medical tourists indicate that an information sheet may promote further consideration of ethical concerns of medical tourism. However, given that these interviews were performed with former medical tourists, it remains unknown whether such a document might impact upon the decision-making of prospective medical tourists. Furthermore, participants indicated a need for an additional tool such as a website for continued discussion about these concerns. As such, along with dissemination of the information sheet, future research implications should

All-terrain vehicles (ATVs) on the road: a serious traffic safety and public health concern.

Science.gov (United States)

Denning, Gerene; Jennissen, Charles; Harland, Karisa; Ellis, David; Buresh, Christopher

2013-01-01

On-road all-terrain vehicle (ATV) crashes are frequent occurrences that disproportionately impact rural communities. These crashes occur despite most states having laws restricting on-road ATV use. A number of overall risk factors for ATV-related injuries have been identified (e.g., lack of helmet, carrying passengers). However, few studies have determined the relative contribution of these and other factors to on-road crashes and injuries. The objective of our study was to determine whether there were differences between on- and off-road ATV crashes in their demographics and/or mechanisms and outcomes of injuries. Data were derived from our statewide ATV injury surveillance database (2002-2009). Crash location and crash and injury mechanisms were coded using a modification of the Department of Transportation (DOT) coding system. Descriptive analyses and statistical comparisons (chi-square test) of variables were performed. Multivariate logistic regression analysis was used to determine relative risk. 976 records were included in the final analysis, with 38 percent of the injured individuals from on-road crashes. Demographics were similar for crashes at each location, with approximately 80 percent males, 30 percent under the age of 16, and 15 percent passengers. However, females and youths under 16 were over 4 times more likely to be passengers (P ≤ 0.0001), regardless of crash location. Compared to those off-road, on-road crash victims were approximately 10 times more likely to be involved in a vehicle-vehicle collision (P road crashes were also twice as likely to test positive for alcohol as those off-road (P road victims were only half as likely to be helmeted (P road crashes involved a collision with another vehicle, suggesting that ATVs on the road represent a potential traffic safety concern. Of note, helmets were associated with reduced risk for the number and severity of brain injuries, providing further support for the importance of helmet use. Finally

The TSN bill concerning transparency and safety in the nuclear sector

International Nuclear Information System (INIS)

Leger, M.; Lahorgue, M.B.; Strohl, P.

2009-01-01

This document gathers together 3 articles whose common purpose is to shed light on the 13. June 2006 French law on transparency and safety in the nuclear sector. This law is fundamental because it gave, for the first time, the legal definitions of basic concepts like nuclear safety, public information or transparency. It also gave a series of principles on which the right in nuclear activities, has to rely: the principle of precaution, the principle of prevention, the principle of remedial action, the principle of who pollutes has to pay, and the principle of public information. The law gives also a clear scheme of the roles and responsibilities in the nuclear sector: the state, the government, the nuclear safety authority, the nuclear facility operator and the land (on which the nuclear facility stands) owner. (A.C.)

Safety guidebook relative to the disposal of radioactive wastes in deep geologic formation; Guide de surete relatif au stockage definitif des dechets radioactifs en formation geologique profonde

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

The French nuclear safety authority (ASN) initiated in 2003 a revision process of the objectives to be considered during the research and work steps of the implementation of a radioactive waste storage facility in deep geologic formations. The purpose of this document is to define the safety objectives that have to be retained at each step of this implementation, from the site characterization to the closure of the facility. This update takes into account the works carried out by the ANDRA (French national agency of radioactive wastes) in the framework of the law from December 30, 1991, and the advices of the permanent experts group about these works. It takes also into consideration the international research works in this domain and the choices defined in the program law no 2006-739 from June 28, 2006 relative to the sustainable management of radioactive materials and wastes. The main modifications concern: the notion of reversibility, the definition of the safety functions of disposal components, the safety goals and the design principles assigned to waste packages, the control of nuclear materials and the monitoring objectives of the facility. The documents treats of the following points: 1 - the objectives of public health and environment protection; 2 - the safety principles and the safety-related design bases of the facility; and 3 - the method used for demonstrating the disposal safety. (J.S.)

International symposium on research reactor utilization, safety and management. Book of extended synopses

International Nuclear Information System (INIS)

1999-01-01

The Symposium, considered as an important meeting of the owners and operators of research reactors as well as scientists concerned with problems of research reactors operation, management and safety covered the following topics: global and regional overview of research reactors, research reactors utilisation, research reactors safety, research reactors management, research reactors engineering. IAEA Research Reactors Database (RRDB) contains data concerning 291 operational research reactors, 247 shutdown reactors, 106 decommissioned reactors, 15 under construction and 15 new reactors planned. There is quite an even distribution of operational research reactors among 58 countries. Although about 66% of operational research reactors described in the RRDB are over 30 years old, the number of research reactors under construction or planned appears to have increased in recent years. According to the RRDB, the major applications of research reactors are in the field of neutron activation analysis, isotope production and neutron scattering work. Great concern was shown for several aspects of research reactors safety, especially since the average age of the operating research reactors is almost 30 years. Ageing problems involve more than the degradation of properties of the materials. Issues such as outdated equipment, lack of spare parts, outdating of the control and documentation systems related to the reactor, as well as budgetary limitations, affect the safety of some reactors. There are serious problems related to the spent fuel condition and the ageing of fuel storage facilities, in particular corrosion and leakage. The outstanding issues of concern are life extension of the spent fuel storage facilities and the future of take-back programmes of foreign research reactor fuels that will not be continued. A number of discussions related to safety requirements were focused on licensing and regulatory issues, especially in the case of older research reactors and those

International symposium on research reactor utilization, safety and management. Book of extended synopses

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-11-01

The Symposium, considered as an important meeting of the owners and operators of research reactors as well as scientists concerned with problems of research reactors operation, management and safety covered the following topics: global and regional overview of research reactors, research reactors utilisation, research reactors safety, research reactors management, research reactors engineering. IAEA Research Reactors Database (RRDB) contains data concerning 291 operational research reactors, 247 shutdown reactors, 106 decommissioned reactors, 15 under construction and 15 new reactors planned. There is quite an even distribution of operational research reactors among 58 countries. Although about 66% of operational research reactors described in the RRDB are over 30 years old, the number of research reactors under construction or planned appears to have increased in recent years. According to the RRDB, the major applications of research reactors are in the field of neutron activation analysis, isotope production and neutron scattering work. Great concern was shown for several aspects of research reactors safety, especially since the average age of the operating research reactors is almost 30 years. Ageing problems involve more than the degradation of properties of the materials. Issues such as outdated equipment, lack of spare parts, outdating of the control and documentation systems related to the reactor, as well as budgetary limitations, affect the safety of some reactors. There are serious problems related to the spent fuel condition and the ageing of fuel storage facilities, in particular corrosion and leakage. The outstanding issues of concern are life extension of the spent fuel storage facilities and the future of take-back programmes of foreign research reactor fuels that will not be continued. A number of discussions related to safety requirements were focused on licensing and regulatory issues, especially in the case of older research reactors and those

Nanotechnology in food science: Functionality, applicability, and safety assessment

Directory of Open Access Journals (Sweden)

Xiaojia He

2016-10-01

Full Text Available Rapid development of nanotechnology is expected to transform many areas of food science and food industry with increasing investment and market share. In this article, current applications of nanotechnology in food systems are briefly reviewed. Functionality and applicability of food-related nanotechnology are highlighted in order to provide a comprehensive view on the development and safety assessment of nanotechnology in the food industry. While food nanotechnology offers great potential benefits, there are emerging concerns arising from its novel physicochemical properties. Therefore, the safety concerns and regulatory policies on its manufacturing, processing, packaging, and consumption are briefly addressed. At the end of this article, the perspectives of nanotechnology in active and intelligent packaging applications are highlighted.

International codes concerning the security of radioisotopes

International Nuclear Information System (INIS)

Kusama, Keiji

2013-01-01

Explained is the title subject with international and Japanese official argument or publications and actions, where the security is defined as protection of sealed and unsealed radioisotopes (RI) from malicious acts. IAEA worked out the Code of Conduct on the Safety and Security of Radioactive Sources in 2004 based on its preceding argument and with the turning point of the terrorism 3.11 (2001), and Nuclear Security Recommendations on radioactive material and associated facilities (2011), for whose prerequisite, Security of radioactive sources: implementing guide (2009) and Security in the transport of radioactive material (2008) had been drawn up. The Code of Conduct indicates the security system to regulate the sealed sources that each nation has to build up through legislation, setup of regulatory agency, registration of the sources, provision of concerned facilities with radiation protection, etc. For attaining this purpose, IAEA defined Guidance on the Import and Export of Radioactive Sources (2005, 2012), Categorization of radioactive sources (2005) and Dangerous quantities of radioactive material (D-VALUES) (2006). For updating the related matters, IAEA holds international conferences somewhere in the world every year. The Nuclear Security Recommendations indicate the nation's responsibility of building up and maintaining the security system above with well-balanced measures between the safe and secure use of RI without the invalid inhibition of their usage. Japan government worked out the concept essential for ensuring the nuclear security in Sep. 2011, in which for RI, defined were the risk and benefit in use and security, and securing role of the present legal systems concerning the safety handling and objective RI involved in their registration system. Securing measures of RI in such usage as medical and industrial aids must be of advanced usefulness and safety in harmony with activities of other countries. (T.T)

Safety upgrading of the PAKS Nuclear Plant

International Nuclear Information System (INIS)

Vamos, G.; Vigassy, J.

1993-01-01

In the last several years the net electricity from the Paks NPP represents almost half of the Hungarian total. The 4 units of Paks belong to the latest generation of the VVER-440 units, the small-sized Russian designed PWRs. Reviewing the main design features of them, the safety merits and safety concerns are summarized. Due to the conservative design and the extensive operating experience the safety merits appear to be more significant than generally believed. The VVER-440 type has two models, the 230 and 213, which have a large number of distinctive safety features. These are highlighted in the section comparisons. A quality assurance program was initiated in Paks very early. A long-term safety upgrading program was also initiated, originating from vendor recommendations, regulatory decisions, in-house operating experience and safety concerns, and independent reviews. The main areas and some examples of the measures are described. This program, like all other activities related to nuclear safety, has been under regulatory control. The specific features of the Hungarian regulatory system are described. For advanced, general and new evaluation of the safety of the units in Paks in accordance with the internationally recommended criteria of the 90's, the project AGNES has been launched with international participation. The scope of this project is summarized. International efforts as the IAEA Regional Project on safety assessment of VVER-440/213 and VVER-440/230 units are underway. Since safety is not only a question of design, but it can be significantly influenced by operations and maintenance practices, the Paks NPP has invited LAEA's OSART and ASSET missions, WANO's Pilot Peer Review

Current regulatory developments concerning the implementation of probabilistic safety analyses for external hazards in Germany

International Nuclear Information System (INIS)

Krauss, Matias; Berg, Heinz-Peter

2014-01-01

The Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU) initiated in September 2003 a comprehensive program for the revision of the national nuclear safety regulations which has been successfully completed in November 2012. These nuclear regulations take into account the current recommendations of the International Atomic Energy Agency (IAEA) and Western European Nuclear Regulators Association (WENRA). In this context, the recommendations and guidelines of the Nuclear Safety Standards Commission (KTA) and the technical documents elaborated by the respective expert group on Probabilistic Safety Analysis for Nuclear Power Plants (FAK PSA) are being updated or in the final process of completion. A main topic of the revision was the issue external hazards. As part of this process and in the light of the accident at Fukushima and the findings of the related actions resulting in safety reviews of nuclear power plants at national level in Germany and on European level, a revision of all relevant standards and documents has been made, especially the recommendations of KTA and FAK PSA. In that context, not only design issues with respect to events such as earthquakes and floods have been discussed, but also methodological issues regarding the implementation of improved probabilistic safety analyses on this topic. As a result of the revision of the KTA 2201 series 'Design of Nuclear Power Plants against Seismic Events' with their parts 1 to 6, part 1 'Principles' was published as the first standard in November 2011, followed by the revised versions of KTA 2201.2 (soil) and 2201.4 (systems and components) in 2012. The modified the standard KTA 2201.3 (structures) is expected to be issued before the end of 2013. In case of part 5 (seismic instrumentation) and part 6 (post>seismic actions) draft amendments are expected in 2013. The expert group 'Probabilistic Safety Assessments for Nuclear Power Plants' (FAK PSA) is an advisory body of the Federal

Report on safety related occurrences and reactor trips July 1, 1979 - December 31, 1979

International Nuclear Information System (INIS)

Olsson, S.; Andermo, L.

1980-01-01

This is a report on all reported safety related occurrences and reactor trips in Swedish nuclear power plants in operation during July 1 to December 31, 1979 inclusive. The facilities involved are Barsebaeck 1 and 2, Oskarshamn 1 and 2 and Ringhals 1 and 2. During this period of 6 months 76 safety related occurrences and 27 reactor trips have been reported to the Nuclear Power Inspectorate. It is to the greatest extent conventional components such as valves and pumps which bring about the safety related occurrences or occurrences leading to outages or power reductions. However, the component errors discovered in the safety related systems have not affected the function of their redundant system and other diverse systems have not been involved. Therefore the reactor safety has been satisfactory. The total number of reactor trips are normal. The average value for these 6 months is 4.5 trips/unit. Approximetely one half of the reactor trips happened at zero or very low power operation. The fact that even small deviations from prescribed operation result in an automatic and safe shut down of the reactor, does not always imply a conflict with operational availability. The greatest outages are caused by occurrences without safety significance. (author)

Safety; Avertissement

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This annual report of the Senior Inspector for the Nuclear Safety, analyses the nuclear safety at EDF for the year 1999 and proposes twelve subjects of consideration to progress. Five technical documents are also provided and discussed concerning the nuclear power plants maintenance and safety (thermal fatigue, vibration fatigue, assisted control and instrumentation of the N4 bearing, 1300 MW reactors containment and time of life of power plants). (A.L.B.)

IAEA activities related to safety indicators, time frames and reference scenarios

International Nuclear Information System (INIS)

Batandjieva, B.; Hioki, K.; Metcalf, P.

2002-01-01

The fundamental principles for the safe management of radioactive waste have been agreed internationally and form the basis for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management that entered into force in June 2001. Protection of human health and the environment and safety of facilities (including radioactive waste disposal facilities) are widely recognised principles to be followed and demonstrated in post-closure safety assessment of waste repositories. Dose and risk are at present internationally agreed safety criteria, used for judging the acceptability of such facilities. However, there have been a number of activities initiated and co-ordinated by the International Atomic Energy Agency (IAEA) which have provided an international forum for discussion and consensus building on the use safety indicators which are complementary to dose and risk. The Agency has been working on the definition of other safety indicators, such as flux, time, environmental concentration, etc.; the desired characteristics, and use of these indicators in different time frames. The IAEA has focused on safety indicators related to geological disposal, exploring their role in the development of a safety case, evaluating the advantages and disadvantages of using other safety indicators and how they complement the dose and risk indicators. The use of these indicators have been discussed also from regulatory perspective, mainly in terms of achieving reasonable assurance and confidence in safety assessments for waste repositories and decision making in the presence of uncertainty in the context of disposal of long-lived waste. Considerable effort has also been expended by the Agency on the development and application of principles for defining critical groups and biospheres for deep geological repositories. One of the important and successful IAEA programmes in this field is the Biosphere Modelling and Assessment (BIOMASS) project

Building competence in radiation protection and the safe use of radiation sources. Safety guide

International Nuclear Information System (INIS)

2005-01-01

An essential element of a national infrastructure for radiation protection and safety is the maintenance of an adequate number of competent personnel. This Safety Guide makes recommendations concerning the building of competence in protection and safety, which relate to the training and assessment of qualification of new personnel and retraining of existing personnel in order to develop and maintain appropriate levels of competence. This Safety Guide addresses training in protection and safety aspects in relation to all practices and intervention situations in nuclear and radiation related technologies. This document covers the following aspects: the categories of persons to be trained. The requirements for education, training and experience for each category. The processes of qualification and authorization of persons. A national strategy for building competence

Nuclear power and related safety issues

International Nuclear Information System (INIS)

Valdezco, Eulinia M.

2009-01-01

There are a cluster of trends that reinforce the importance of nuclear power on the world scene. Energy is the essential underpinning for economic and societal progress and, as the developing world advances, the demand for energy is growing significantly. At the same time, the carbon-intensive sources of energy on which the world has traditionally relied - in particular, coal, oil, and natural gas - pose grave threats because the growing concentrations of carbon dioxide in the atmosphere will bring about climate and ocean acidification. At the same time, rising and volatile fossil fuel prices, coupled with concerns about the security of supplies of oil and gas, enhance interest in sources of energy that do not pose the same costs and risks. As an important part of the world's response to these threats, many countries are embarking on either new or expanded nuclear power programs, more commonly referred to as a nuclear renaissance. The construction of nuclear power plants is under consideration in over thirty countries that do not currently use nuclear power. For new entrants that may have experience in constructing and operating large-scale industrial and infrastructure projects, they may not be fully familiar with the unique requirements of nuclear power and may not be fully recognize the major commitments and understandings that they must assume. Additionally, an understanding of the full range of obligations may have diminished in those countries with only one or a few reactors and where nuclear construction has not been undertaken for a long time. It is therefore in the interest of all to ensure that every country with a nuclear power program has the resources, expertise, authority and capacity to assure safety in a complete and effective manner and is committed to doing so. This presentation will outline some of the more important national infrastructure considerations including nuclear safety issues for launching a nuclear power program. An update on the

Food Safety as a contributor to Food Security: global policy concerns & challenges

Directory of Open Access Journals (Sweden)

Vijay Kumar Chattu

2015-12-01

Full Text Available The theme for World Health Day campaign for this year 2015 is “Food safety: from farm to plate, make food safe”. The day focuses on demonstrating the importance of food safety along the whole length of the food chain in a globalized world, from production and transport, to preparation and consumption (1. Everyone needs food and needs it every day either plant sources or animal sources or both. The food we eat must be nutritious and safe but we often ignore or overlook the issue of food safety. Many cases of food borne diseases either acute poisoning or chronic exposure are largely under reported. In this globalized world, though the food chain extends over thousands of miles from different continents, an error or contamination in one country can affect the health of consumers on the other part of the world. To ensure full impact, these actions must build on principles of government stewardship, engagement of civil society, (2.According to UN, access to a safe and secure food supply is a basic human right. Food safety and food security are interrelated concepts which have an impact on the health outcomes and quality of human lives. As per Food and Agricultural Organization (FAO, Food security is a situation that exists when all people, at all times, have physical, social and economic access to sufficient, safe and nutritious food that meets their dietary needs and food preferences for an active and healthy life, (3. Based on the definition of Food security, four food security dimensions can be identified: food availability, economic and physical access to food, food utilization and stability over time. Apart from that food security is also affected by Poverty and Climate change.Food safety is an umbrella term that encompasses many aspects like food items handling, preparation and storage of food to prevent illness and injury. The other important issues are chemical, microphysical and microbiological aspects of food safety, (4. Control of

Criticality safety considerations. Integral Monitored Retrievable Storage (MRS) Facility

International Nuclear Information System (INIS)

1986-09-01

This report summarizes the criticality analysis performed to address criticality safety concerns and to support facility design during the conceptual design phase of the Monitored Retrievable Storage (MRS) Facility. The report addresses the criticality safety concerns, the design features of the facility relative to criticality, and the results of the analysis of both normal operating and hypothetical off-normal conditions. Key references are provided (Appendix C) if additional information is desired by the reader. The MRS Facility design was developed and the related analysis was performed in accordance with the MRS Facility Functional Design Criteria and the Basis for Design. The detailed description and calculations are documented in the Integral MRS Facility Conceptual Design Report. In addition to the summary portion of this report, explanatary notes for various terms, calculation methodology, and design parameters are presented in Appendix A. Appendix B provides a brief glossary of technical terms

Environmental contaminants of emerging concern in seafood – European database on contaminant levels

International Nuclear Information System (INIS)

Vandermeersch, Griet; Lourenço, Helena Maria; Alvarez-Muñoz, Diana; Cunha, Sara; Diogène, Jorge; Cano-Sancho, German; Sloth, Jens J.; Kwadijk, Christiaan; Barcelo, Damia; Allegaert, Wim; Bekaert, Karen; Fernandes, José Oliveira; Marques, Antonio

2015-01-01

Marine pollution gives rise to concern not only about the environment itself but also about the impact on food safety and consequently on public health. European authorities and consumers have therefore become increasingly worried about the transfer of contaminants from the marine environment to seafood. So-called “contaminants of emerging concern” are chemical substances for which no maximum levels have been laid down in EU legislation, or substances for which maximum levels have been provided but which require revision. Adequate information on their presence in seafood is often lacking and thus potential risks cannot be excluded. Assessment of food safety issues related to these contaminants has thus become urgent and imperative. A database ( (www.ecsafeseafooddbase.eu)), containing available information on the levels of contaminants of emerging concern in seafood and providing the most recent data to scientists and regulatory authorities, was developed. The present paper reviews a selection of contaminants of emerging concern in seafood including toxic elements, endocrine disruptors, brominated flame retardants, pharmaceuticals and personal care products, polycyclic aromatic hydrocarbons and derivatives, microplastics and marine toxins. Current status on the knowledge of human exposure, toxicity and legislation are briefly presented and the outcome from scientific publications reporting on the levels of these compounds in seafood is presented and discussed. - Highlights: • Development of a European database regarding contaminants of emerging concern. • Current status on knowledge of human exposure, toxicity and legislation. • Review on the occurrence of contaminants of emerging concern in seafood.

Environmental contaminants of emerging concern in seafood – European database on contaminant levels

Energy Technology Data Exchange (ETDEWEB)

Vandermeersch, Griet, E-mail: griet.vandermeersch@ilvo.vlaanderen.be [Institute for Agricultural and Fisheries Research (ILVO), Animal Sciences Unit – Fisheries, Ankerstraat 1, 8400 Oostende (Belgium); Lourenço, Helena Maria [Division of Aquaculture and Upgrading (DivAV), Portuguese Institute for the Sea and Atmosphere (IPMA), Lisboa (Portugal); Alvarez-Muñoz, Diana [Catalan Institute for Water Research (ICRA), Girona (Spain); Cunha, Sara [LAQV-REQUIMTE, Laboratory of Bromatology and Hydrology, Faculty of Pharmacy, University of Porto, Rua Jorge de Viterbo Ferreira 228, 4050-313 Porto (Portugal); Diogène, Jorge [Institute of Research and Technology in Food and Agriculture (IRTA), Sant Carles de la Ràpita (Spain); Cano-Sancho, German [Laboratory of Toxicology and Environmental Health, School of Medicine, Rovirai Virgili University (URV), Reus (Spain); Sloth, Jens J. [National Food Institute, Technical University of Denmark (DTU Food), Søborg (Denmark); Kwadijk, Christiaan [Institute for Marine Resources and Ecosystem Studies (IMARES), Wageningen University and Research Center, Ijmuiden (Netherlands); Barcelo, Damia [Catalan Institute for Water Research (ICRA), Girona (Spain); Water and Soil Quality Research Group, Department of Environmental Chemistry, IDAEA-CSIC, Barcelona (Spain); Allegaert, Wim; Bekaert, Karen [Institute for Agricultural and Fisheries Research (ILVO), Animal Sciences Unit – Fisheries, Ankerstraat 1, 8400 Oostende (Belgium); Fernandes, José Oliveira [LAQV-REQUIMTE, Laboratory of Bromatology and Hydrology, Faculty of Pharmacy, University of Porto, Rua Jorge de Viterbo Ferreira 228, 4050-313 Porto (Portugal); Marques, Antonio [Division of Aquaculture and Upgrading (DivAV), Portuguese Institute for the Sea and Atmosphere (IPMA), Lisboa (Portugal); and others

2015-11-15

Marine pollution gives rise to concern not only about the environment itself but also about the impact on food safety and consequently on public health. European authorities and consumers have therefore become increasingly worried about the transfer of contaminants from the marine environment to seafood. So-called “contaminants of emerging concern” are chemical substances for which no maximum levels have been laid down in EU legislation, or substances for which maximum levels have been provided but which require revision. Adequate information on their presence in seafood is often lacking and thus potential risks cannot be excluded. Assessment of food safety issues related to these contaminants has thus become urgent and imperative. A database ( (www.ecsafeseafooddbase.eu)), containing available information on the levels of contaminants of emerging concern in seafood and providing the most recent data to scientists and regulatory authorities, was developed. The present paper reviews a selection of contaminants of emerging concern in seafood including toxic elements, endocrine disruptors, brominated flame retardants, pharmaceuticals and personal care products, polycyclic aromatic hydrocarbons and derivatives, microplastics and marine toxins. Current status on the knowledge of human exposure, toxicity and legislation are briefly presented and the outcome from scientific publications reporting on the levels of these compounds in seafood is presented and discussed. - Highlights: • Development of a European database regarding contaminants of emerging concern. • Current status on knowledge of human exposure, toxicity and legislation. • Review on the occurrence of contaminants of emerging concern in seafood.

IEEE Std 382-1980: IEEE standard for qualification of safety-related valve actuators