WorldWideScience

Sample records for safety assessment method

  1. LNG Safety Assessment Evaluation Methods

    Energy Technology Data Exchange (ETDEWEB)

    Muna, Alice Baca [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); LaFleur, Angela Christine [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-05-01

    Sandia National Laboratories evaluated published safety assessment methods across a variety of industries including Liquefied Natural Gas (LNG), hydrogen, land and marine transportation, as well as the US Department of Defense (DOD). All the methods were evaluated for their potential applicability for use in the LNG railroad application. After reviewing the documents included in this report, as well as others not included because of repetition, the Department of Energy (DOE) Hydrogen Safety Plan Checklist is most suitable to be adapted to the LNG railroad application. This report was developed to survey industries related to rail transportation for methodologies and tools that can be used by the FRA to review and evaluate safety assessments submitted by the railroad industry as a part of their implementation plans for liquefied or compressed natural gas storage ( on-board or tender) and engine fueling delivery systems. The main sections of this report provide an overview of various methods found during this survey. In most cases, the reference document is quoted directly. The final section provides discussion and a recommendation for the most appropriate methodology that will allow efficient and consistent evaluations to be made. The DOE Hydrogen Safety Plan Checklist was then revised to adapt it as a methodology for the Federal Railroad Administration’s use in evaluating safety plans submitted by the railroad industry.

  2. A new assessment method for demonstrating the sufficiency of the safety assessment and the safety margins of the geological disposal system

    International Nuclear Information System (INIS)

    Ohi, Takao; Kawasaki, Daisuke; Chiba, Tamotsu; Takase, Toshio; Hane, Koji

    2013-01-01

    A new method for demonstrating the sufficiency of the safety assessment and safety margins of the geological disposal system has been developed. The method is based on an existing comprehensive sensitivity analysis method and can systematically identify the successful conditions, under which the dose rate does not exceed specified safety criteria, using analytical solutions for nuclide migration and the results of a statistical analysis. The successful conditions were identified using three major variables. Furthermore, the successful conditions at the level of factors or parameters were obtained using relational equations between the variables and the factors or parameters making up these variables. In this study, the method was applied to the safety assessment of the geological disposal of transuranic waste in Japan. Based on the system response characteristics obtained from analytical solutions and on the successful conditions, the classification of the analytical conditions, the sufficiency of the safety assessment and the safety margins of the disposal system were then demonstrated. A new assessment procedure incorporating this method into the existing safety assessment approach is proposed in this study. Using this procedure, it is possible to conduct a series of safety assessment activities in a logical manner. (author)

  3. Suggestions on the Development of Safety Culture Assessment Method

    International Nuclear Information System (INIS)

    Choi, Young Sung; Choi, Kwang Sik; Kim, Woong Sik

    2006-01-01

    Several efforts have been made to assess safety culture of organization that operates nuclear power plants in Korea. The MOST and KINS played a major role to develop assessment methods and KHNP applied them to its NPPs. This paper explains the two methods developed by KINS briefly and presents the insights obtained from the two different applications. It concludes with some suggestions for safety culture assessment based on the insights

  4. Research on fuzzy comprehensive assessment method of nuclear power plant safety culture

    International Nuclear Information System (INIS)

    Xiang Yuanyuan; Chen Xukun; Xu Rongbin

    2012-01-01

    Considering the traits of safety culture in nuclear plant, 38 safety culture assessment indexes are established from 4 aspects such as safety values, safety institution, safety behavior and safety sub- stances. Based on it, a comprehensive assessment method for nuclear power plant safety culture is constructed by using AHP (Analytic Hierarchy Process) approach and fuzzy mathematics. The comprehensive assessment method has the quality of high precision and high operability, which can support the decision making of safety culture development. (authors)

  5. Safety assessment and detection methods of genetically modified organisms.

    Science.gov (United States)

    Xu, Rong; Zheng, Zhe; Jiao, Guanglian

    2014-01-01

    Genetically modified organisms (GMOs), are gaining importance in agriculture as well as the production of food and feed. Along with the development of GMOs, health and food safety concerns have been raised. These concerns for these new GMOs make it necessary to set up strict system on food safety assessment of GMOs. The food safety assessment of GMOs, current development status of safety and precise transgenic technologies and GMOs detection have been discussed in this review. The recent patents about GMOs and their detection methods are also reviewed. This review can provide elementary introduction on how to assess and detect GMOs.

  6. Development of a New Safety Culture Assessment Method for Nuclear Power Plants (NPPs) (A study to suggest a new safety culture assessment method in nuclear power plants)

    International Nuclear Information System (INIS)

    Han, Sang Min; Seong, Poong Hyun

    2014-01-01

    This study is conducted to suggest a new safety culture assessment method in nuclear power plants. Criteria with various existing safety culture analysis methods are united, and reliability analysis methods are applied. The concept of the most representative methods, Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA), are adopted to assess safety culture. Through this application, it is expected that the suggested method will bring results with convenience and objectiveness

  7. Development of a New Safety Culture Assessment Method for Nuclear Power Plants (NPPs) (A study to suggest a new safety culture assessment method in nuclear power plants)

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sang Min; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of)

    2014-08-15

    This study is conducted to suggest a new safety culture assessment method in nuclear power plants. Criteria with various existing safety culture analysis methods are united, and reliability analysis methods are applied. The concept of the most representative methods, Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA), are adopted to assess safety culture. Through this application, it is expected that the suggested method will bring results with convenience and objectiveness.

  8. Crane Safety Assessment Method Based on Entropy and Cumulative Prospect Theory

    Directory of Open Access Journals (Sweden)

    Aihua Li

    2017-01-01

    Full Text Available Assessing the safety status of cranes is an important problem. To overcome the inaccuracies and misjudgments in such assessments, this work describes a safety assessment method for cranes that combines entropy and cumulative prospect theory. Firstly, the proposed method transforms the set of evaluation indices into an evaluation vector. Secondly, a decision matrix is then constructed from the evaluation vectors and evaluation standards, and an entropy-based technique is applied to calculate the index weights. Thirdly, positive and negative prospect value matrices are established from reference points based on the positive and negative ideal solutions. Thus, this enables the crane safety grade to be determined according to the ranked comprehensive prospect values. Finally, the safety status of four general overhead traveling crane samples is evaluated to verify the rationality and feasibility of the proposed method. The results demonstrate that the method described in this paper can precisely and reasonably reflect the safety status of a crane.

  9. Human reliability analysis methods for probabilistic safety assessment

    International Nuclear Information System (INIS)

    Pyy, P.

    2000-11-01

    Human reliability analysis (HRA) of a probabilistic safety assessment (PSA) includes identifying human actions from safety point of view, modelling the most important of them in PSA models, and assessing their probabilities. As manifested by many incidents and studies, human actions may have both positive and negative effect on safety and economy. Human reliability analysis is one of the areas of probabilistic safety assessment (PSA) that has direct applications outside the nuclear industry. The thesis focuses upon developments in human reliability analysis methods and data. The aim is to support PSA by extending the applicability of HRA. The thesis consists of six publications and a summary. The summary includes general considerations and a discussion about human actions in the nuclear power plant (NPP) environment. A condensed discussion about the results of the attached publications is then given, including new development in methods and data. At the end of the summary part, the contribution of the publications to good practice in HRA is presented. In the publications, studies based on the collection of data on maintenance-related failures, simulator runs and expert judgement are presented in order to extend the human reliability analysis database. Furthermore, methodological frameworks are presented to perform a comprehensive HRA, including shutdown conditions, to study reliability of decision making, and to study the effects of wrong human actions. In the last publication, an interdisciplinary approach to analysing human decision making is presented. The publications also include practical applications of the presented methodological frameworks. (orig.)

  10. Method of operator safety assessment for underground mobile mining equipment

    Science.gov (United States)

    Działak, Paulina; Karliński, Jacek; Rusiński, Eugeniusz

    2018-01-01

    The paper presents a method of assessing the safety of operators of mobile mining equipment (MME), which is adapted to current and future geological and mining conditions. The authors focused on underground mines, with special consideration of copper mines (KGHM). As extraction reaches into deeper layers of the deposit it can activate natural hazards, which, thus far, have been considered unusual and whose range and intensity are different depending on the field of operation. One of the main hazards that affect work safety and can become the main barrier in the exploitation of deposits at greater depths is climate threat. The authors have analysed the phenomena which may impact the safety of MME operators, with consideration of accidents that have not yet been studied and are not covered by the current safety standards for this group of miners. An attempt was made to develop a method for assessing the safety of MME operators, which takes into account the mentioned natural hazards and which is adapted to current and future environmental conditions in underground mines.

  11. Method of operator safety assessment for underground mobile mining equipment

    Directory of Open Access Journals (Sweden)

    Działak Paulina

    2018-01-01

    Full Text Available The paper presents a method of assessing the safety of operators of mobile mining equipment (MME, which is adapted to current and future geological and mining conditions. The authors focused on underground mines, with special consideration of copper mines (KGHM. As extraction reaches into deeper layers of the deposit it can activate natural hazards, which, thus far, have been considered unusual and whose range and intensity are different depending on the field of operation. One of the main hazards that affect work safety and can become the main barrier in the exploitation of deposits at greater depths is climate threat. The authors have analysed the phenomena which may impact the safety of MME operators, with consideration of accidents that have not yet been studied and are not covered by the current safety standards for this group of miners. An attempt was made to develop a method for assessing the safety of MME operators, which takes into account the mentioned natural hazards and which is adapted to current and future environmental conditions in underground mines.

  12. Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 1 - guideword applicability and method description.

    Science.gov (United States)

    Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

    2008-12-15

    Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design.

  13. Probabilistic assessment methods as a tool for developing nations to make safety decisions

    International Nuclear Information System (INIS)

    Gumley, P.; Inamdar, S.V.

    1985-01-01

    This paper advocates the use of probabilistic safety assessment methods in making safety decisions. It discusses the question of adequate safety - what it means to a country buying a nuclear power plant, and how probabilistic safety assessment studies of the reference plant can be used for ensuring this adequate safety. It is proposed that adequate safety means ensuring that the plant would behave, in accident conditions, in a manner similar to the way it is expected to behave were it in the country of origin. For this one needs to know how the plant responds under somewhat altered conditions. These altered conditions can arise from such factors as varying reliability of electrical grids, different manufacturing technology, local systems design and operator capability. In the design of nuclear power plants, the traditional approach to safety has led to the belief that availability and effectiveness of safety systems alone are all that is required to ensure plant safety. This belief can result in design oversights leading to potential problems arising from the power production systems and the service systems. Participation by the buying country in the design of such systems, and understanding the safety implications thereof, can be facilitated by probabilistic safety assessment methods. This philosophy is illustrated in this paper by examples. (author)

  14. Safety assessment of cast steel valve housing using NDE- and FM-methods

    Energy Technology Data Exchange (ETDEWEB)

    Blauel, J G; Hodulak, L [Fraunhofer-Institut fuer Werkstoffmechanik, Freiburg im Breisgau (Germany)

    1988-12-31

    This document presents some results concerning the safety assessment of cast steel valve housing. This risk assessment is performed through the Non Destructive Examination and Fracture Mechanics methods. (TEC).

  15. Online probabilistic operational safety assessment of multi-mode engineering systems using Bayesian methods

    International Nuclear Information System (INIS)

    Lin, Yufei; Chen, Maoyin; Zhou, Donghua

    2013-01-01

    In the past decades, engineering systems become more and more complex, and generally work at different operational modes. Since incipient fault can lead to dangerous accidents, it is crucial to develop strategies for online operational safety assessment. However, the existing online assessment methods for multi-mode engineering systems commonly assume that samples are independent, which do not hold for practical cases. This paper proposes a probabilistic framework of online operational safety assessment of multi-mode engineering systems with sample dependency. To begin with, a Gaussian mixture model (GMM) is used to characterize multiple operating modes. Then, based on the definition of safety index (SI), the SI for one single mode is calculated. At last, the Bayesian method is presented to calculate the posterior probabilities belonging to each operating mode with sample dependency. The proposed assessment strategy is applied in two examples: one is the aircraft gas turbine, another is an industrial dryer. Both examples illustrate the efficiency of the proposed method

  16. Safety assessment of infrastructures using a new Bayesian Monte Carlo method

    NARCIS (Netherlands)

    Rajabali Nejad, Mohammadreza; Demirbilek, Z.

    2011-01-01

    A recently developed Bayesian Monte Carlo (BMC) method and its application to safety assessment of structures are described in this paper. We use a one-dimensional BMC method that was proposed in 2009 by Rajabalinejad in order to develop a weighted logical dependence between successive Monte Carlo

  17. Current Methods Applied to Biomaterials - Characterization Approaches, Safety Assessment and Biological International Standards.

    Science.gov (United States)

    Oliveira, Justine P R; Ortiz, H Ivan Melendez; Bucio, Emilio; Alves, Patricia Terra; Lima, Mayara Ingrid Sousa; Goulart, Luiz Ricardo; Mathor, Monica B; Varca, Gustavo H C; Lugao, Ademar B

    2018-04-10

    Safety and biocompatibility assessment of biomaterials are themes of constant concern as advanced materials enter the market as well as products manufactured by new techniques emerge. Within this context, this review provides an up-to-date approach on current methods for the characterization and safety assessment of biomaterials and biomedical devices from a physicalchemical to a biological perspective, including a description of the alternative methods in accordance with current and established international standards. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  18. Thinking of the safety assessment of HLW disposal

    International Nuclear Information System (INIS)

    Li Honghui; Zhao Shuaiwei; Liu Jianqin; Liu Wei; Wan Lei; Yang Zhongtian; An Hongxiang; Sun Qinghong

    2014-01-01

    The function and the research methods of safety assessment are discussed. Two methods about safety assessment and the requirement of safety assessment are introduced. The key parameters and influence factors in nuclide transport of safety assessment are specialized. The works will be done on safety assessment is discussed which will give some suggests for the development of safety assessment. (authors)

  19. Considerations on Applying the Method for Assessing the Level of Safety at Work

    Directory of Open Access Journals (Sweden)

    Costica Bejinariu

    2017-07-01

    Full Text Available The application of the method for assessing the level of safety at work starts with a document that contains the cover page, the description of the company (name, location, core business, organizational chart etc., description of the work system, a detailed list of its components, and a brief description of the assessment method. It continues with a Microsoft Excel document, which represents the actual application of the method and, finally, there is another document presenting conclusions, proposals, and prioritizations, which leads to the execution of the Prevention and Protection Plan. The present paper approaches the issue of developing the Microsoft Excel document, an essential part of the method for assessing the level of safety at work. The document is divided into a variable number of worksheets, showing the risk categories of general, specific, and management.

  20. Safer Roads: Comparisons Between Road Assessment Program and Composite Road Safety Index Method

    Directory of Open Access Journals (Sweden)

    Mohd Razelan Intan Suhana

    2017-01-01

    Full Text Available In most countries, crash statistics have becoming very crucial in evaluating road’s safety level. In Malaysia, these data are very important in deciding crash-prone areas known as black spot where specific road improvements plan will be proposed. However due to the unavailability of reliable crash data in many developing countries, appropriate road maintenance measures are facing great troubles. In light of that, several proactive methods in defining road’s safety level such as Road Assessment Program (RAP have emerged. This research aim to compare two proactive methods that have been tested in Malaysian roads ; road assessment program and road environment risk index which was developed based on composite index theory in defining road’s safety level. Composite road environment risk index was combining several crucial environment indicators, assigning weight and aggregating the individual index together to form a single value representing the road’s safety level. Based on the results, it can be concluded that both road assessment program and composite road environment risk index are contradicted in six different ways such as type of speed used, type of analysis used and their final outcomes. However, with an aim to promote safer roads, these two methods can be used concurrently as the outcomes in both methods seems to fulfil each other’s gap very well.

  1. Ranking the types of intersections for assessing the safety of pedestrians using TOPSIS method

    Directory of Open Access Journals (Sweden)

    Călin ŞERBU

    2014-11-01

    Full Text Available Every year, more than 1500 accidents with pedestrian occur in the intersections in Romania. The number of accidents involving pedestrians in roundabouts intersections type increased approximately three times in 2013 compared to 2009 in Romania. This alarming increase led to the need of assessing the safety of pedestrians in intersections with or without safety systems. The safety systems for pedestrians and drivers include: the road marking, the pedestrian crossings marking, signal intersections with road signs, traffic lights or pedestrian safety barriers. We propose to assess the types of intersections with TOPSIS method.

  2. Human factors in safety assessment. Safety culture assessment

    International Nuclear Information System (INIS)

    Zhang Li; Deng Zhiliang; Wang Yiqun; Huang Weigang

    1996-01-01

    This paper analyses the present conditions and problems in enterprises safety assessment, and introduces the characteristics and effects of safety culture. The authors think that safety culture must be used as a 'soul' to form the pattern of modern safety management. Furthermore, they propose that the human safety and synthetic safety management assessment in a system should be changed into safety culture assessment. Finally, the assessment indicators are discussed

  3. Validation of innovative technologies and strategies for regulatory safety assessment methods: challenges and opportunities.

    Science.gov (United States)

    Stokes, William S; Wind, Marilyn

    2010-01-01

    Advances in science and innovative technologies are providing new opportunities to develop test methods and strategies that may improve safety assessments and reduce animal use for safety testing. These include high throughput screening and other approaches that can rapidly measure or predict various molecular, genetic, and cellular perturbations caused by test substances. Integrated testing and decision strategies that consider multiple types of information and data are also being developed. Prior to their use for regulatory decision-making, new methods and strategies must undergo appropriate validation studies to determine the extent that their use can provide equivalent or improved protection compared to existing methods and to determine the extent that reproducible results can be obtained in different laboratories. Comprehensive and optimal validation study designs are expected to expedite the validation and regulatory acceptance of new test methods and strategies that will support improved safety assessments and reduced animal use for regulatory testing.

  4. Integrated Safety and Security Risk Assessment Methods: A Survey of Key Characteristics and Applications

    OpenAIRE

    Chockalingam, Sabarathinam; Hadziosmanovic, Dina; Pieters, Wolter; Teixeira, Andre; van Gelder, Pieter

    2017-01-01

    Over the last years, we have seen several security incidents that compromised system safety, of which some caused physical harm to people. Meanwhile, various risk assessment methods have been developed that integrate safety and security, and these could help to address the corresponding threats by implementing suitable risk treatment plans. However, an overarching overview of these methods, systematizing the characteristics of such methods, is missing. In this paper, we conduct a systematic l...

  5. Integrated Safety and Security Risk Assessment Methods: A Survey of Key Characteristics and Applications

    NARCIS (Netherlands)

    Chockalingam, Sabarathinam; Hadziosmanovic, D.; Pieters, Wolter; Texeira, Andre; van Gelder, Pieter

    2016-01-01

    Over the last years, we have seen several security incidents that compromised system safety, of which some caused physical harm to people. Meanwhile, various risk assessment methods have been developed that integrate safety and security, and these could help to address the corresponding threats by

  6. Feasibility studies of safety assessment methods for programmable automation systems. Final report of the AVV project

    International Nuclear Information System (INIS)

    Haapanen, P.; Maskuniitty, M.; Pulkkinen, U.; Heikkinen, J.; Korhonen, J.; Tuulari, E.

    1995-10-01

    Feasibility studies of two different groups of methodologies for safety assessment of programmable automation systems has been executed at the Technical Research Centre of Finland (VTT). The studies concerned the dynamic testing methods and the fault tree (FT) and failure mode and effects analysis (FMEA) methods. In order to get real experience in the application of these methods, an experimental testing of two realistic pilot systems were executed and a FT/FMEA analysis of a programmable safety function accomplished. The purpose of the studies was not to assess the object systems, but to get experience in the application of methods and assess their potentials and development needs. (46 refs., 21 figs.)

  7. Risk analysis methods: their importance for safety assessment of practices using radiation

    International Nuclear Information System (INIS)

    Dumenigo, C; Vilaragut, J.J.; Ferro, R.; Guillen, A.; Ramirez, M.L.; Ortiz Lopez, P.; Rodriguez, M.; McDonnell, J.D.; Papadopulos, S.; Pereira, P.P.; Goncalvez, M.; Morales, J.; Larrinaga, E.; Lopez Morones, R.; Sanchez, R.; Delgado, J.M.; Sanchez, C.; Somoano, F.

    2008-01-01

    Radiation safety has been based for many years on verification of compliance with regulatory requirements, codes of practice and international standards, which can be considered prescriptive methods. Accident analyses have been published, lessons have been learned and safety assessments have incorporated the need to check whether a facility is ready to avoid accidents similar to the reported ones. These approaches can be also called 'reactive methods'. They have in common the fundamental limitation of being restricted to reported experience, but do not take into account other potential events, which were never published or never happened, i.e. latent risks. Moreover, they focus on accident sequences with major consequences and low probability but may not pay enough attention to other sequences leading to lower, but still significant consequences with higher probability. More proactive approaches are, therefore, needed, to assess risk in radiation facilities. They aim at identifying all potential equipment faults and human error, which can lead to predefined unwanted consequences and are based on the general risk equation: Risk = Probability of occurrence of an accidental sequence * magnitude of the consequences. In this work, a review is given of the experience obtained by the countries of the Ibero American Forum of Nuclear and Radiation Safety Regulatory Organizations, by applying proactive methods to radiotherapy practice. In particular, probabilistic safety assessment (PSA) used for external beam treatments with linear electron accelerators and two studies, on cobalt 60 therapy and brachytherapy using the risk-matrix approach are presented. The work has identified event sequences, their likelihood of occurrence, the consequences, the efficiency of interlocks and control checks and the global importance in terms of overall risk, to facilitate decision making and implementation of preventive measures. A comparison is presented of advantages and limitations of

  8. Presentation of a Software Method for Use of Risk Assessment in Building Fire Safety Measure Optimization

    Directory of Open Access Journals (Sweden)

    A. R. Koohpaei

    2012-05-01

    Full Text Available Background and aims: The property loss and physical injuries due to fire events in buildings demonstrate the necessity of implementation of efficient and performance based fire safety measures. Effective and high efficiency protection is possible when design and selection of protection measures are based on risk assessment. This study aims at presenting a software method to make possible selection and design of building fire safety measures based upon quantitative risk assessment and building characteristics. Methods: based on “Fire Risk Assessment Method for Engineer (FRAME” a program in MATLB software was written. The first section of this program, according to the FRAME method and based on the specification of a building, calculates the potential risk and acceptable risk level. In the second section, according to potential risk, acceptable risk level and the fire risk level that user want, program calculate concession of protective factor for that building.Results: The prepared software make it possible to assign the fire safety measure based on quantitative risk level and all building specifications. All calculations were performed with 0.001 of precision and the accuracy of this software was assessed with handmade calculations. During the use of the software if an error occurs in calculations, it can be distinguished in the output. Conclusion: Application of quantitative risk assessment is a suitable tool for increasing of efficiency in designing and execution of fire protection measure in building. With using this software the selected fire safety measure would be more efficient and suitable since the selection of fire safety measures performed on risk assessment and particular specification of a building. Moreover fire risk in the building can be managed easily and carefully.

  9. Survey of probabilistic methods in safety and risk assessment for nuclear power plant licensing

    International Nuclear Information System (INIS)

    1984-04-01

    After an overview about the goals and general methods of probabilistic approaches in nuclear safety the main features of probabilistic safety or risk assessment (PRA) methods are discussed. Mostly in practical applications not a full-fledged PRA is applied but rather various levels of analysis leading from unavailability assessment of systems over the more complex analysis of the probable core damage stages up to the assessment of the overall health effects on the total population from a certain practice. The various types of application are discussed in relation to their limitation and benefits for different stages of design or operation of nuclear power plants. This gives guidance for licensing staff to judge the usefulness of the various methods for their licensing decisions. Examples of the application of probabilistic methods in several countries are given. Two appendices on reliability analysis and on containment and consequence analysis provide some more details on these subjects. (author)

  10. Safety Assessment for Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-06-15

    In the past few decades, international guidance has been developed on methods for assessing the safety of predisposal and disposal facilities for radioactive waste. More recently, it has been recognized that there is also a need for specific guidance on safety assessment in the context of decommissioning nuclear facilities. The importance of safety during decommissioning was highlighted at the International Conference on Safe Decommissioning for Nuclear Activities held in Berlin in 2002 and at the First Review Meeting of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management in 2003. At its June 2004 meeting, the Board of Governors of the IAEA approved the International Action Plan on Decommissioning of Nuclear Facilities (GOV/2004/40), which called on the IAEA to: ''establish a forum for the sharing and exchange of national information and experience on the application of safety assessment in the context of decommissioning and provide a means to convey this information to other interested parties, also drawing on the work of other international organizations in this area''. In response, in November 2004, the IAEA launched the international project Evaluation and Demonstration of Safety for Decommissioning of Facilities Using Radioactive Material (DeSa) with the following objectives: -To develop a harmonized approach to safety assessment and to define the elements of safety assessment for decommissioning, including the application of a graded approach; -To investigate the practical applicability of the methodology and performance of safety assessments for the decommissioning of various types of facility through a selected number of test cases; -To investigate approaches for the review of safety assessments for decommissioning activities and the development of a regulatory approach for reviewing safety assessments for decommissioning activities and as a basis for regulatory decision making; -To provide a forum

  11. Safety assessment in plant layout design using indexing approach: Implementing inherent safety perspective

    International Nuclear Information System (INIS)

    Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

    2008-01-01

    Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design

  12. The Demon-Angel method in systematic safety assessment

    International Nuclear Information System (INIS)

    Vassakis, A.G.

    1999-01-01

    Since 'design for safety' of large engineering systems with a high level of innovation requires an exhaustive safety analysis and since a subsequent corrective action may become a very large bottleneck in improving such a system, fundamental knowledge in designing safe systems is essential. The lack of any 'rule of thumb' makes such knowledge a matter of personal experience rather than the subject of an academic course. This paper proposes a new method for the theoretical safety study of different system configurations independently of any particular application. This method aims to help the construction of a 'rule of thumb' for what is a safe system and what is not. The Demon and Angel ideas are explained and the schematic presentation of these elements is introduced. Four representative case studies demonstrate the use of this method

  13. Safety assessment and verification for nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2001-01-01

    This publication supports the Safety Requirements on the Safety of Nuclear Power Plants: Design. This Safety Guide was prepared on the basis of a systematic review of all the relevant publications including the Safety Fundamentals, Safety of Nuclear Power Plants: Design, current and ongoing revisions of other Safety Guides, INSAG reports and other publications that have addressed the safety of nuclear power plants. This Safety Guide also provides guidance for Contracting Parties to the Convention on Nuclear Safety in meeting their obligations under Article 14 on Assessment and Verification of Safety. The Safety Requirements publication entitled Safety of Nuclear Power Plants: Design states that a comprehensive safety assessment and an independent verification of the safety assessment shall be carried out before the design is submitted to the regulatory body. This publication provides guidance on how this requirement should be met. This Safety Guide provides recommendations to designers for carrying out a safety assessment during the initial design process and design modifications, as well as to the operating organization in carrying out independent verification of the safety assessment of new nuclear power plants with a new or already existing design. The recommendations for performing a safety assessment are suitable also as guidance for the safety review of an existing plant. The objective of reviewing existing plants against current standards and practices is to determine whether there are any deviations which would have an impact on plant safety. The methods and the recommendations of this Safety Guide can also be used by regulatory bodies for the conduct of the regulatory review and assessment. Although most recommendations of this Safety Guide are general and applicable to all types of nuclear reactors, some specific recommendations and examples apply mostly to water cooled reactors. Terms such as 'safety assessment', 'safety analysis' and 'independent

  14. Safety assessment, safety performance indicators at the Paks Nuclear Power Plant

    International Nuclear Information System (INIS)

    Baji, C.; Vamos, G.; Toth, J.

    2001-01-01

    The Paks Nuclear Power Plant has been using different methods of safety assessment (event analysis, self-assessment, probabilistic safety analysis), including performance indicators characterizing both operational and safety performance since the early years of operation of the plant. Regarding the safety performance, the indicators include safety system performance, number of scrams, release of radioactive materials, number of safety significant events, industrial safety indicator, etc. The Paks NPP also reports a set of ten indicators to WANO Performance Indicator Programme which, among others, include safety related indicators as well. However, a more systematic approach to structuring and trending safety indicators is needed so that they can contribute to the enhancement of the operational safety. A more comprehensive set of indicators and a systematic evaluation process was introduced in 1996. The performance indicators framework proposed by the IAEA was adapted to Paks in this year to further improve the process. Safety culture assessment and characterizing safety culture is part of the assessment process. (author)

  15. Safety assessment for spent fuel storage facilities

    International Nuclear Information System (INIS)

    1994-01-01

    This Safety Practice has been prepared as part of the IAEA's programme on the safety assessment of interim spent fuel storage facilities which are not an integral part of an operating nuclear power plant. This report provides general guidance on the safety assessment process, discussing both deterministic and probabilistic assessment methods. It describes the safety assessment process for normal operation and anticipated operational occurrences and also related to accident conditions. 10 refs, 2 tabs

  16. Suggestions for an improved HRA method for use in Probabilistic Safety Assessment

    International Nuclear Information System (INIS)

    Parry, Gareth W.

    1995-01-01

    This paper discusses why an improved Human Reliability Analysis (HRA) approach for use in Probabilistic Safety Assessments (PSAs) is needed, and proposes a set of requirements on the improved HRA method. The constraints imposed by the need to embed the approach into the PSA methodology are discussed. One approach to laying the foundation for an improved method, using models from the cognitive psychology and behavioral science disciplines, is outlined

  17. The awareness of employees in safety culture through the improved nuclear safety culture evaluation method

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Ga; Sung, Chan Ho; Jung, Yeon Sub [KHNP Central Research Institute, Daejeon (Korea, Republic of)

    2012-10-15

    After the Chernobyl nuclear accident in 1986, nuclear safety culture terminology was at first introduced emphasizing the importance of employees' attitude and organizational safety. The concept of safety culture was spread by INSAG 4 published in 1991. From that time, IAEA had provided the service of ASCOT for the safety culture assessment. However, many people still are thinking that safety culture is abstract and is not clear. It is why the systematic and reliable assessment methodology was not developed. Assessing safety culture is to identify what is the basic assumption for any organization to accept unconsciously. Therefore, it is very difficult to reach a meaningful conclusion by a superficial investigation alone. KHNP had been doing the safety culture assessment which was based on ASCOT methodology every 2 years. And this result had contributed to improving safety culture. But this result could not represent the level of organization's safety culture due to the limitation of method. So, KHNP has improved the safety culture method by benchmarking the over sea assessment techniques in 2011. The effectiveness of this improved methodology was validated through a pilot assessment. In this paper, the level of employees' safety culture awareness was analyzed by the improved method and reviewed what is necessary for the completeness and objectivity of the nuclear safety culture assessment methodology.

  18. The awareness of employees in safety culture through the improved nuclear safety culture evaluation method

    International Nuclear Information System (INIS)

    Kim, Young Ga; Sung, Chan Ho; Jung, Yeon Sub

    2012-01-01

    After the Chernobyl nuclear accident in 1986, nuclear safety culture terminology was at first introduced emphasizing the importance of employees' attitude and organizational safety. The concept of safety culture was spread by INSAG 4 published in 1991. From that time, IAEA had provided the service of ASCOT for the safety culture assessment. However, many people still are thinking that safety culture is abstract and is not clear. It is why the systematic and reliable assessment methodology was not developed. Assessing safety culture is to identify what is the basic assumption for any organization to accept unconsciously. Therefore, it is very difficult to reach a meaningful conclusion by a superficial investigation alone. KHNP had been doing the safety culture assessment which was based on ASCOT methodology every 2 years. And this result had contributed to improving safety culture. But this result could not represent the level of organization's safety culture due to the limitation of method. So, KHNP has improved the safety culture method by benchmarking the over sea assessment techniques in 2011. The effectiveness of this improved methodology was validated through a pilot assessment. In this paper, the level of employees' safety culture awareness was analyzed by the improved method and reviewed what is necessary for the completeness and objectivity of the nuclear safety culture assessment methodology

  19. Intermediate probabilistic safety assessment approach for safety critical digital systems

    International Nuclear Information System (INIS)

    Taeyong, Sung; Hyun Gook, Kang

    2001-01-01

    Even though the conventional probabilistic safety assessment methods are immature for applying to microprocessor-based digital systems, practical needs force to apply it. In the Korea, UCN 5 and 6 units are being constructed and Korean Next Generation Reactor is being designed using the digital instrumentation and control equipment for the safety related functions. Korean regulatory body requires probabilistic safety assessment. This paper analyzes the difficulties on the assessment of digital systems and suggests an intermediate framework for evaluating their safety using fault tree models. The framework deals with several important characteristics of digital systems including software modules and fault-tolerant features. We expect that the analysis result will provide valuable design feedback. (authors)

  20. Application and problems of probability methods in technical safety assessment in the field of nuclear engineering and other technologies

    International Nuclear Information System (INIS)

    Heuser, F.W.

    1980-01-01

    On the basis of a deterministic safety concept that has been developed in nuclear engineering, approaches for a probabilistic interpretation of existing safety requirements and for a further risk assessment are described. The procedures in technical reliability analysis and its application in nuclear engineering are discussed. By the example of a reliability analysis for a reactor protection system the author discusses the question as to what extent methods of reliability analysis can be used to interpret deterministically derived safety requirements. The the author gives a survey of the current value and application of probabilistic reliability assessments in non-nuclear technology. The last part of this report deals with methods of risk analysis and its use for safety assessment in nuclear engineering. On the basis of WASH 1,400 the most important phases and tasks of research work in risk assessment are explained, showing the basic criteria and the methods to be applied in risk analysis. (orig./HSCH) [de

  1. A safety culture assessment by mixed methods at a public maternity and infant hospital in China

    Directory of Open Access Journals (Sweden)

    Listyowardojo TA

    2017-07-01

    Full Text Available Tita Alissa Listyowardojo,1 Xiaoling Yan,2,3 Stephen Leyshon,1 Bobbie Ray-Sannerud,1 Xin Yan Yu,4 Kai Zheng,4 Tao Duan2,3 1Life Sciences Program, Group Technology and Research, DNV GL, Hovik, Norway; 2Quality and Safety Department, Shanghai First Maternity and Infant Hospital, 3Tongji University School of Medicine, Shanghai, 4Healthcare Department, Business Assurance, DNV GL, Beijing, China Objective: To assess safety culture at a public maternity hospital in Shanghai, China, using a sequential mixed methods approach. The study was part of a bigger study looking at the application of the mixed methods approach to assess safety culture in health care in different organizations and countries.Methodology: A mixed methods approach was utilized by first distributing the Safety Attitudes Questionnaire measuring six safety culture dimensions and five independent items to all hospital staff (n=1482 working in 18 departments at a single hospital. Afterward, semistructured interviews were conducted using convenience sampling, where 48 hospital staff from nine departments at the same hospital were individually interviewed.Results: The survey received a response rate of 96%. The survey findings show significant differences between the hospital departments in almost all safety culture dimensions and independent items. Similarly, the interview findings revealed that there were different, competing priorities between departments perceived to result in a reduced quality of collaboration and bottlenecks in care delivery. Another major finding was that staff who worked more hours per week would perceive working conditions significantly more negatively. Issues related to working conditions were also the most common concerns discussed in the interviews, especially the issue on high workload. High workload was also reflected in the fact that 91.45% of survey respondents reported that they worked 40 hours or longer per week. Finally, interview findings complemented

  2. Assessment of Safety Culture

    International Nuclear Information System (INIS)

    Bilic Zabric, T.; Kavsek, D.

    2006-01-01

    A strong safety culture leads to more effective conduct of work and a sense of accountability among managers and employees, who should be given the opportunity to expand skills by training. The resources expended would thus result in tangible improvements in working practices and skills, which encourage further improvement of safety culture. In promoting an improved safety culture, NEK has emphasized both national and organizational culture with an appropriate balance of behavioural sciences and quality management systems approaches. In recent years there has been particular emphasis put on an increasing awareness of the contribution that human behavioural sciences can make to develop good safety practices. The purpose of an assessment of safety culture is to increase the awareness of the present culture, to serve as a basis for improvement and to keep track of the effects of change or improvement over a longer period of time. There is, however, no single approach that is suitable for all purposes and which can measure, simultaneously, all the intangible aspects of safety culture, i.e. the norms, values, beliefs, attitudes or the behaviours reflecting the culture. Various methods have their strengths and weaknesses. To prevent significant performance problems, self-assessment is used. Self-assessment is the process of identifying opportunities for improvement actively or, in some cases, weaknesses that could cause more serious errors or events. Self-assessments are an important input to the corrective action programme. NEK has developed questionnaires for safety culture self-assessment to obtain information that is representative of the whole organization. Questionnaires ensure a greater degree of anonymity, and create a less stressful situation for the respondent. Answers to questions represent the more apparent and conscious values and attitudes of the respondent. NEK proactively co-operates with WANO, INPO, IAEA in the areas of Safety Culture and Human

  3. Conducting organizational safety reviews - requirements, methods and experience

    International Nuclear Information System (INIS)

    Reiman, T.; Oedewald, P.; Wahlstroem, B.; Rollenhagen, C.; Kahlbom, U.

    2008-03-01

    Organizational safety reviews are part of the safety management process of power plants. They are typically performed after major reorganizations, significant incidents or according to specified review programs. Organizational reviews can also be a part of a benchmarking between organizations that aims to improve work practices. Thus, they are important instruments in proactive safety management and safety culture. Most methods that have been used for organizational reviews are based more on practical considerations than a sound scientific theory of how various organizational or technical issues influence safety. Review practices and methods also vary considerably. The objective of this research is to promote understanding on approaches used in organizational safety reviews as well as to initiate discussion on criteria and methods of organizational assessment. The research identified a set of issues that need to be taken into account when planning and conducting organizational safety reviews. Examples of the issues are definition of appropriate criteria for evaluation, the expertise needed in the assessment and the organizational motivation for conducting the assessment. The study indicates that organizational safety assessments involve plenty of issues and situations where choices have to be made regarding what is considered valid information and a balance has to be struck between focus on various organizational phenomena. It is very important that these choices are based on a sound theoretical framework and that these choices can later be evaluated together with the assessment findings. The research concludes that at its best, the organizational safety reviews can be utilised as a source of information concerning the changing vulnerabilities and the actual safety performance of the organization. In order to do this, certain basic organizational phenomena and assessment issues have to be acknowledged and considered. The research concludes with recommendations on

  4. Conducting organizational safety reviews - requirements, methods and experience

    Energy Technology Data Exchange (ETDEWEB)

    Reiman, T.; Oedewald, P.; Wahlstroem, B. [Technical Research Centre of Finland, VTT (Finland); Rollenhagen, C. [Royal Institute of Technology, KTH, (Sweden); Kahlbom, U. [RiskPilot (Sweden)

    2008-03-15

    Organizational safety reviews are part of the safety management process of power plants. They are typically performed after major reorganizations, significant incidents or according to specified review programs. Organizational reviews can also be a part of a benchmarking between organizations that aims to improve work practices. Thus, they are important instruments in proactive safety management and safety culture. Most methods that have been used for organizational reviews are based more on practical considerations than a sound scientific theory of how various organizational or technical issues influence safety. Review practices and methods also vary considerably. The objective of this research is to promote understanding on approaches used in organizational safety reviews as well as to initiate discussion on criteria and methods of organizational assessment. The research identified a set of issues that need to be taken into account when planning and conducting organizational safety reviews. Examples of the issues are definition of appropriate criteria for evaluation, the expertise needed in the assessment and the organizational motivation for conducting the assessment. The study indicates that organizational safety assessments involve plenty of issues and situations where choices have to be made regarding what is considered valid information and a balance has to be struck between focus on various organizational phenomena. It is very important that these choices are based on a sound theoretical framework and that these choices can later be evaluated together with the assessment findings. The research concludes that at its best, the organizational safety reviews can be utilised as a source of information concerning the changing vulnerabilities and the actual safety performance of the organization. In order to do this, certain basic organizational phenomena and assessment issues have to be acknowledged and considered. The research concludes with recommendations on

  5. Rad waste disposal safety analysis / Integrated safety assessment of a waste repository

    International Nuclear Information System (INIS)

    Jeong, Jongtae; Choi, Jongwon; Kang, Chulhyung

    2012-04-01

    We developed CYPRUS+and adopted PID and RES method for the development of scenario. Safety performance assessment program was developed using GoldSim for the safety assessment of disposal system for the disposal of spnet fuels and wastes resulting from the pyrpoprocessing. Biosphere model was developed and verified in cooperation with JAEA. The capability to evaluate post-closure performance and safety was added to the previously developed program. And, nuclide migration and release to the biosphere considering site characteristics was evaluated by using deterministic and probabilistic approach. Operational safety assessment for drop, fire, and earthquake was also statistically evaluated considering well-established input parameter distribution. Conservative assessment showed that dose rate is below the limit value of low- and intermediate-level repository. Gas generation mechanism within engineered barrier was defined and its influence on safety was evaluated. We made probabilistic safety assessment by obtaining the probability distribution functions of important input variables and also made a sensitivity analysis. The maximum annual dose rate was shown to be below the safety limit value of 10 mSv/yr. The structure and element of safety case was developed to increase reliability of safety assessment methodology for a deep geological repository. Finally, milestone for safety case development and implementation strategy for each safety case element was also proposed

  6. Environment assessing for airborne radioactive particulate release-introduction of methods in IAEA safety report series No.19

    International Nuclear Information System (INIS)

    Meng, Dan; Yang, Liu; Shen, Fu; Yang, Yi; Ma, Yinghao; Ma, Tao; Zhang, Zhilong; Fu, Cuiming

    2016-01-01

    Airborne radioactive particulate in many important nuclear facilities (particularly nuclear power plants) will have a strong impact on the relative public dose if they are released into the corresponding environment traversing the stack or vents. The radiation protection researchers have regarded the relative environment assessing and estimation of public doses. And the model of assessing impact of discharges radioactive substance to the environment have been recommended by many international organizations (e.g. IAEA) with the nuclear energy safety and radiation protection. This paper introduced the generic models that were suggested by International Atomic Energy Agency (IAEA), for use in assessing the impact of discharges of radioactive substances to the environment (e.g. IAEA Safety Report Series No.19). The writers of this paper, based on the recommend methods, assessed the discharge limits in some airborne radioactive substances discharging standards. The reasons that IAEA method are introduced are mainly the following considerations: IAEA is one of international organizations with some authorities in the nuclear energy safety and radiation protection; and, more important, the recommend modes are operational methods rather than the methods having little operations such as that have used by some researchers. It is wish that the introduced methods in this paper can be referenced in draft or revise of the standards related to discharges of radioactive substances to the environment

  7. Environment assessing for airborne radioactive particulate release-introduction of methods in IAEA safety report series No.19

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Dan; Yang, Liu; Shen, Fu; Yang, Yi; Ma, Yinghao; Ma, Tao; Zhang, Zhilong; Fu, Cuiming [China Institute for Radiation Protection, Taiyuan (China)

    2016-12-15

    Airborne radioactive particulate in many important nuclear facilities (particularly nuclear power plants) will have a strong impact on the relative public dose if they are released into the corresponding environment traversing the stack or vents. The radiation protection researchers have regarded the relative environment assessing and estimation of public doses. And the model of assessing impact of discharges radioactive substance to the environment have been recommended by many international organizations (e.g. IAEA) with the nuclear energy safety and radiation protection. This paper introduced the generic models that were suggested by International Atomic Energy Agency (IAEA), for use in assessing the impact of discharges of radioactive substances to the environment (e.g. IAEA Safety Report Series No.19). The writers of this paper, based on the recommend methods, assessed the discharge limits in some airborne radioactive substances discharging standards. The reasons that IAEA method are introduced are mainly the following considerations: IAEA is one of international organizations with some authorities in the nuclear energy safety and radiation protection; and, more important, the recommend modes are operational methods rather than the methods having little operations such as that have used by some researchers. It is wish that the introduced methods in this paper can be referenced in draft or revise of the standards related to discharges of radioactive substances to the environment.

  8. Development of a quantitative safety assessment method for nuclear I and C systems including human operators

    International Nuclear Information System (INIS)

    Kim, Man Cheol

    2004-02-01

    Conventional PSA (probabilistic safety analysis) is performed in the framework of event tree analysis and fault tree analysis. In conventional PSA, I and C systems and human operators are assumed to be independent for simplicity. But, the dependency of human operators on I and C systems and the dependency of I and C systems on human operators are gradually recognized to be significant. I believe that it is time to consider the interdependency between I and C systems and human operators in the framework of PSA. But, unfortunately it seems that we do not have appropriate methods for incorporating the interdependency between I and C systems and human operators in the framework of Pasa. Conventional human reliability analysis (HRA) methods are not developed to consider the interdependecy, and the modeling of the interdependency using conventional event tree analysis and fault tree analysis seem to be, event though is does not seem to be impossible, quite complex. To incorporate the interdependency between I and C systems and human operators, we need a new method for HRA and a new method for modeling the I and C systems, man-machine interface (MMI), and human operators for quantitative safety assessment. As a new method for modeling the I and C systems, MMI and human operators, I develop a new system reliability analysis method, reliability graph with general gates (RGGG), which can substitute conventional fault tree analysis. RGGG is an intuitive and easy-to-use method for system reliability analysis, while as powerful as conventional fault tree analysis. To demonstrate the usefulness of the RGGG method, it is applied to the reliability analysis of Digital Plant Protection System (DPPS), which is the actual plant protection system of Ulchin 5 and 6 nuclear power plants located in Republic of Korea. The latest version of the fault tree for DPPS, which is developed by the Integrated Safety Assessment team in Korea Atomic Energy Research Institute (KAERI), consists of 64

  9. Developing IAM for Life Cycle Safety Assessment

    NARCIS (Netherlands)

    Toxopeus, Marten E.; Lutters, Diederick; Nee, Andrew Y.C.; Song, Bin; Ong, Soh-Khim

    2013-01-01

    This publication discusses aspects of the development of an impact assessment method (IAM) for safety. Compared to the many existing IAM’s for environmentally oriented LCA, this method should translate the impact of a product life cycle on the subject of safety. Moreover, the method should be

  10. Assessing the safety of the road network : a simple method.

    NARCIS (Netherlands)

    Janssen, S.T.M.C.

    1993-01-01

    Research by the SWOV Institute for Road Safety Research in The Netherlands assessing the safety of the Dutch road network is presented. In The Netherlands urban and rural roads and motorways are used roughly equally, however accident rates vary greatly. These are discussed in this paper. Tables show

  11. Post-disposal safety assessment of toxic and radioactive waste: waste types, disposal practices, disposal criteria, assessment methods and post-disposal impacts

    International Nuclear Information System (INIS)

    Torres, C.; Simon, I.; Little, R.H.; Charles, D.; Grogan, H.A.; Smith, G.M.; Sumerling, T.J.; Watkins, B.M.

    1993-01-01

    The need for safety assessments of waste disposal stems not only from the implementation of regulations requiring the assessment of environmental effects, but also from the more general need to justify decisions on protection requirements. As waste-disposal methods have become more technologically based, through the application of more highly engineered design concepts and through more rigorous and specific limitations on the types and quantities of the waste disposed, it follows that assessment procedures also must become more sophisticated. It is the overall aim of this study to improve the predictive modelling capacity for post-disposal safety assessments of land-based disposal facilities through the development and testing of a comprehensive, yet practicable, assessment framework. This report records all the work which has been undertaken during Phase 1 of the study. Waste types, disposal practices, disposal criteria and assessment methods for both toxic and radioactive waste are reviewed with the purpose of identifying those features relevant to assessment methodology development. Difference and similarities in waste types, disposal practices, criteria and assessment methods between countries, and between toxic and radioactive wastes are highlighted and discussed. Finally, an approach to identify post-disposal impacts, how they arise and their effects on humans and the environment is described

  12. Assessment of safety culture: Changing regulatory approach in Hungary

    International Nuclear Information System (INIS)

    Ronaky, Jozsef; Toth, Andras

    2002-01-01

    Hungarian Atomic Energy Authority (HAEA) is changing its inspection practice and assessment methods of safety performance and safety culture in operating nuclear facilities. The new approach emphasises integrated team inspection of safety cornerstones and systematic assessment of safety performance of operators. (author)

  13. A computational method for probabilistic safety assessment of I and C systems and human operators in nuclear power plants

    International Nuclear Information System (INIS)

    Kim, Man Cheol; Seong, Poong Hyun

    2006-01-01

    To make probabilistic safety assessment (PSA) more realistic, the improvements of human reliability analysis (HRA) are essential. But, current HRA methods have many limitations including the lack of considerations on the interdependency between instrumentation and control (I and C) systems and human operators, and lack of theoretical basis for situation assessment of human operators. To overcome these limitations, we propose a new method for the quantitative safety assessment of I and C systems and human operators. The proposed method is developed based on the computational models for the knowledge-driven monitoring and the situation assessment of human operators, with the consideration of the interdependency between I and C systems and human operators. The application of the proposed method to an example situation demonstrates that the quantitative description by the proposed method for a probable scenario well matches with the qualitative description of the scenario. It is also demonstrated that the proposed method can probabilistically consider all possible scenarios and the proposed method can be used to quantitatively evaluate the effects of various context factor on the safety of nuclear power plants. In our opinion, the proposed method can be used as the basis for the development of advanced HRA methods

  14. Radiation safety assessment of cobalt 60 external beam radiotherapy using the risk-matrix method

    International Nuclear Information System (INIS)

    Dumenigo, C; Vilaragut, J.J.; Ferro, R.; Guillen, A.; Ramirez, M.L.; Ortiz Lopez, P.; Rodriguez, M.; McDonnell, J.D.; Papadopulos, S.; Pereira, P.P.; Goncalvez, M.; Morales, J.; Larrinaga, E.; Lopez Morones, R.; Sanchez, R.; Delgado, J.M.; Sanchez, C.; Somoano, F.

    2008-01-01

    External beam radiotherapy is the only practice in which humans are placed directly in a radiation beam with the intention to deliver a very high dose. This is why safety in radiotherapy is very critical, and is a matter of interest to both radiotherapy departments and regulatory bodies. Accidental exposures have occurred throughout the world, thus showing the need for systematic safety assessments, capable to identify preventive measures and to minimize consequences of accidental exposure. Risk-matrix is a systematic approach which combines the relevant event features to assess the overall risk of each particular event. Once an event sequence is identified, questions such as how frequent the event, how severe the potential consequences and how reliable the existing safety measures are answered in a risk-matrix table. The ultimate goal is to achieve that the overall risk for events with severe consequences should always be low o very low. In the present study, the risk-matrix method has been applied to an hypothetical radiotherapy department, which could be equivalent to an upper level hospital of the Ibero American region, in terms of safety checks and preventive measures. The application of the method has identified 76 event sequences and revealed that the hypothetical radiotherapy department is sufficiently protected (low risk) against them, including 23 event sequences with severe consequences. The method has revealed that the risk of these sequences could grow to high level if certain specific preventive measures were degraded with time. This study has identified these preventive measures, thus facilitating a rational allocation of resources in regular controls to detect any loss of reliability. The method has proven to have an important practical value and is affordable at hospital level. The elaborated risk-matrix can be easily adapted to local circumstances, in terms of existing controls and safety measures. This approach can help hospitals to identify

  15. Recent Trends In The Methods Of Safety Assessment Of Rad Waste Treatment And Disposal

    International Nuclear Information System (INIS)

    Mahmoud, N.S.

    2012-01-01

    Radioactive waste management system involves a huge variety of processes and activities. This includes; collection and segregation, pretreatment, treatment, conditioning, storage and finally disposal. To assure the safety of the different facility of each step in the waste management system, the operator should prepare a safety analysis report to be assessed by the national regulatory body. The content of the safety analysis report must include all data about the site, facility design, operational phase, waste materials, and safety assessment methodologies. Safety assessment methodologies are iterative processes involving site-specific, prospective modeling evaluations of the pre-operational, operational, and post-closure time in case of disposal facilities. The safety assessment focuses primarily on a decision about compliance with performance objectives, rather than the much more difficult problem of predicting actual radiological impacts on the public at far future times. The recent organization processes of the safety assessment are improved by the ISAM working group from IAEA for waste disposal site. These safety assessment methodologies have been modified within SADRWMS IAEA project for the establishment of safety methodologies for the pre-disposal facilities (treatment and storage facilities) and the disposal site.

  16. Analysis of truncation limit in probabilistic safety assessment

    International Nuclear Information System (INIS)

    Cepin, Marko

    2005-01-01

    A truncation limit defines the boundaries of what is considered in the probabilistic safety assessment and what is neglected. The truncation limit that is the focus here is the truncation limit on the size of the minimal cut set contribution at which to cut off. A new method was developed, which defines truncation limit in probabilistic safety assessment. The method specifies truncation limits with more stringency than presenting existing documents dealing with truncation criteria in probabilistic safety assessment do. The results of this paper indicate that the truncation limits for more complex probabilistic safety assessments, which consist of larger number of basic events, should be more severe than presently recommended in existing documents if more accuracy is desired. The truncation limits defined by the new method reduce the relative errors of importance measures and produce more accurate results for probabilistic safety assessment applications. The reduced relative errors of importance measures can prevent situations, where the acceptability of change of equipment under investigation according to RG 1.174 would be shifted from region, where changes can be accepted, to region, where changes cannot be accepted, if the results would be calculated with smaller truncation limit

  17. Geoelectrical Methods and Monitoring for Dam Safety Assessment, Republic of Korea

    Science.gov (United States)

    Lim, S. K.; Oldenburg, D.; Kang, S.; Song, S. H.

    2016-12-01

    Geoelectrical methods and monitoring to detect the seepage and internal erosion are essential for the safety assessment of earth dams. This work aims to develop improved methodologies to analyze the observed data and to monitor changes in seepage flow using direct current (DC) and self-potential (SP) methods. The seasonal variation of water level at dams causes a change in seepage and water saturation and hence alters the resistivity of the dam material. DC data are sensitive to water saturation and hence changes in saturation can be obtained by repeatedly measuring DC data. However, a more diagnostic parameter for safety assessment is fluid flow, and resistivity is only weakly coupled to that. Fortunately SP signals are directly related to fluid flow, and thus an SP survey has the potential to characterize fluid flow through the earth matrix. In Korea, the safety assessment of earth fill dams has been dealt by Korea Rural Community Corporation (KRC). Most of the dams are relatively old ( >50 years), hence assessing deterioration and corresponding seepage of those dams are crucial. In order to evaluate the engineering geological properties of the soil at earth dams in Korea, two boreholes in each dam were drilled to a bedrock depth that exceeds the height of the dam. A large set of field tests, including standard penetration tests (SPT) and in-situ permeability tests, were carried out along the boreholes. However, seepage paths in the dam is complex hence those limited measurements at a few points is not sufficient to delineate the zone of preferential seepage flow. For this, KRC developed permanent DC monitoring systems at a number of agricultural dams in Korea. The data were automatically collected every 6 hours. During the monitoring, the measurements of the water level at two boreholes were gathered at the same time. In this presentation we select an agricultural dam and delineate an anomalous leakage zone by inverting and interpreting time-lapse DC resistivity

  18. Methods and tools used at the IPSN for the safety assessment of critical software

    International Nuclear Information System (INIS)

    Regnier, P.; Henry, J.Y.

    1998-01-01

    A significant feature of EDF's latest 1400MWe ''N4'' generation of pressurized water reactor (PWR) is the extensive use of computerized instrumentation and control, including a fully digital system for the reactor protection function. For the safety assessment of the software driving the operation of this digital reactor protection called SPIN, IPSN has developed and implemented a set of methods and tools. Using the lessons learned from this experience, IPSN has worked at improving those methods and tools, mainly trying to make them more automatic to use, and has participated in an international assessment exercise to test some other methods and tools, either new products on the market or self-developed products. As a result of these works, this paper presents an up to date overview of the IPSN methods and tools used for the assessment of safety critical software. This assessment, which consists of an analysis of all the documentation associated with the technical specifications and of a representative set of functions, is usually carried out in five steps: (1) critical examination of the documents, (2) evaluation of the quality of the code, (3) determination of the critical software components, (4) development of test cases and choice of testing strategy, (5) dynamic analysis (consistency and robustness). This paper also presents methods and tools developed or implemented by IPSN in order to: evaluate the completeness and consistency of specification and design documents written in natural language; build a model and simulate specification or design items; evaluate the quality of the source code; carry out FMEA analysis; run the binary code and perform tests (CLAIRE); perform random or mutational tests. (author)

  19. Probabilistic safety assessment

    International Nuclear Information System (INIS)

    Hoertner, H.; Schuetz, B.

    1982-09-01

    For the purpose of assessing applicability and informativeness on risk-analysis methods in licencing procedures under atomic law, the choice of instruments for probabilistic analysis, the problems in and experience gained in their application, and the discussion of safety goals with respect to such instruments are of paramount significance. Naturally, such a complex field can only be dealt with step by step, making contribution relative to specific problems. The report on hand shows the essentials of a 'stocktaking' of systems relability studies in the licencing procedure under atomic law and of an American report (NUREG-0739) on 'Quantitative Safety Goals'. (orig.) [de

  20. Construction of knowledge base for geological disposal technologies of high-level radioactive waste Report in 2005. Separate volume 3: Development of safety assessment methods

    International Nuclear Information System (INIS)

    2005-09-01

    The results of development of safety assessment methods by JNC after the second report are reported. JNC-Thermodynamic and JNC-Sorption Database of nuclides was prepared and used. The mass transfer process model in rock, the water quality model of underwater and pore water and approach to modeling radionuclide transport in biosphere were improved. The phenomenological nuclide transport model and the effect assessment model of colloid, natural organic compounds and microorganism were developed. On scenario of safety assessment method, the behaviors in the disposal system were expressed by FEP (Features, Events, and Processes). The effects of data uncertainty and model uncertainty were improved by the assessment technologies and the sensitivity analysis technology. JGIS (JNC Geological Disposal Information Integration System) was developed. The main performance of JGIS was shown. It consists of six chapters; the first chapter is introduction, the second chapter the nuclides transport database, the third the safety assessment model, the forth improvement of safety assessment methods, the fifth application of safety assessment methods and the sixth results and summary. (S.Y.)

  1. Systematic evaluation of non-animal test methods for skin sensitisation safety assessment.

    Science.gov (United States)

    Reisinger, Kerstin; Hoffmann, Sebastian; Alépée, Nathalie; Ashikaga, Takao; Barroso, Joao; Elcombe, Cliff; Gellatly, Nicola; Galbiati, Valentina; Gibbs, Susan; Groux, Hervé; Hibatallah, Jalila; Keller, Donald; Kern, Petra; Klaric, Martina; Kolle, Susanne; Kuehnl, Jochen; Lambrechts, Nathalie; Lindstedt, Malin; Millet, Marion; Martinozzi-Teissier, Silvia; Natsch, Andreas; Petersohn, Dirk; Pike, Ian; Sakaguchi, Hitoshi; Schepky, Andreas; Tailhardat, Magalie; Templier, Marie; van Vliet, Erwin; Maxwell, Gavin

    2015-02-01

    The need for non-animal data to assess skin sensitisation properties of substances, especially cosmetics ingredients, has spawned the development of many in vitro methods. As it is widely believed that no single method can provide a solution, the Cosmetics Europe Skin Tolerance Task Force has defined a three-phase framework for the development of a non-animal testing strategy for skin sensitization potency prediction. The results of the first phase – systematic evaluation of 16 test methods – are presented here. This evaluation involved generation of data on a common set of ten substances in all methods and systematic collation of information including the level of standardisation, existing test data,potential for throughput, transferability and accessibility in cooperation with the test method developers.A workshop was held with the test method developers to review the outcome of this evaluation and to discuss the results. The evaluation informed the prioritisation of test methods for the next phase of the non-animal testing strategy development framework. Ultimately, the testing strategy – combined with bioavailability and skin metabolism data and exposure consideration – is envisaged to allow establishment of a data integration approach for skin sensitisation safety assessment of cosmetic ingredients.

  2. Quantitative risk assessment of digitalized safety systems

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Sung Min; Lee, Sang Hun; Kang, Hym Gook [KAIST, Daejeon (Korea, Republic of); Lee, Seung Jun [UNIST, Ulasn (Korea, Republic of)

    2016-05-15

    A report published by the U.S. National Research Council indicates that appropriate methods for assessing reliability are key to establishing the acceptability of digital instrumentation and control (I and C) systems in safety-critical plants such as NPPs. Since the release of this issue, the methodology for the probabilistic safety assessment (PSA) of digital I and C systems has been studied. However, there is still no widely accepted method. Kang and Sung found three critical factors for safety assessment of digital systems: detection coverage of fault-tolerant techniques, software reliability quantification, and network communication risk. In reality the various factors composing digitalized I and C systems are not independent of each other but rather closely connected. Thus, from a macro point of view, a method that can integrate risk factors with different characteristics needs to be considered together with the micro approaches to address the challenges facing each factor.

  3. Safety assessment of radioactive wastes storage 'Mironova Gora'

    International Nuclear Information System (INIS)

    Serbryakov, B.; Karamushka, V.; Ostroborodov, V.

    2000-01-01

    A project of transforming the radioactive wastes storage 'Mironova Gora' is under development. A safety assessment of this storage facility was performed to gain assurance on the design decision. The assessment, which was based on the safety assessment methods developed for radioactive wastes repositories, is presented in this paper. (author)

  4. Development of a Novel Nuclear Safety Culture Evaluation Method for an Operating Team Using Probabilistic Safety Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sangmin; Lee, Seung Min; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of)

    2015-05-15

    IAEA defined safety culture as follows: 'Safety Culture is that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance'. Also, celebrated behavioral scientist, Cooper, defined safety culture as,'safety culture is that observable degree of effort by which all organizational members direct their attention and actions toward improving safety on a daily basis' with his internal psychological, situational, and behavioral context model. With these various definitions and criteria of safety culture, several safety culture assessment methods have been developed to improve and manage safety culture. To develop a new quantitative safety culture evaluation method for an operating team, we unified and redefined safety culture assessment items. Then we modeled a new safety culture evaluation by adopting level 1 PSA concept. Finally, we suggested the criteria to obtain nominal success probabilities of assessment items by using 'operational definition'. To validate the suggested evaluation method, we analyzed the collected audio-visual recording data collected from a full scope main control room simulator of a NPP in Korea.

  5. Development of a Novel Nuclear Safety Culture Evaluation Method for an Operating Team Using Probabilistic Safety Analysis

    International Nuclear Information System (INIS)

    Han, Sangmin; Lee, Seung Min; Seong, Poong Hyun

    2015-01-01

    IAEA defined safety culture as follows: 'Safety Culture is that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance'. Also, celebrated behavioral scientist, Cooper, defined safety culture as,'safety culture is that observable degree of effort by which all organizational members direct their attention and actions toward improving safety on a daily basis' with his internal psychological, situational, and behavioral context model. With these various definitions and criteria of safety culture, several safety culture assessment methods have been developed to improve and manage safety culture. To develop a new quantitative safety culture evaluation method for an operating team, we unified and redefined safety culture assessment items. Then we modeled a new safety culture evaluation by adopting level 1 PSA concept. Finally, we suggested the criteria to obtain nominal success probabilities of assessment items by using 'operational definition'. To validate the suggested evaluation method, we analyzed the collected audio-visual recording data collected from a full scope main control room simulator of a NPP in Korea

  6. Safety Management and Safety Culture Self Assessment of Kartini Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Syarip, S., E-mail: syarip@batan.go.id [Centre for Accelerator and Material Process Technology, National Nuclear Energy Agency (BATAN), Yogyakarta (Indonesia)

    2014-10-15

    The self-assessment of safety culture and safety management status of Kartini research reactor is a step to foster safety culture and management by identifying good practices and areas for improvement, and also to improve reactor safety in a whole. The method used in this assessment is based on questionnaires provided by the Forum for Nuclear Cooperation in Asia (FNCA), then reviewed by experts. Based on the assessment and evaluation results, it can be concluded that there were several good practices in maintaining the safety status of Kartini reactor such as: reactor operators and radiation protection workers were aware and knowledgeable of the safety standards and policies that apply to their operation, readily accept constructive criticism from their management and from the inspectors of regulatory body that address safety performance. As a proof, for the last four years the number of inspection/audit findings from Regulatory Body (BAPETEN) tended to decrease while the reactor utilization and its operating hour increased. On the other hands there were also some comments and recommendations for improvement of reactor safety culture, such as that there should be more frequent open dialogues between employees and managers, to grow and attain a mutual support to achieve safety goals. (author)

  7. Biasing transition rate method based on direct MC simulation for probabilistic safety assessment

    Institute of Scientific and Technical Information of China (English)

    Xiao-Lei Pan; Jia-Qun Wang; Run Yuan; Fang Wang; Han-Qing Lin; Li-Qin Hu; Jin Wang

    2017-01-01

    Direct Monte Carlo (MC) simulation is a powerful probabilistic safety assessment method for accounting dynamics of the system.But it is not efficient at simulating rare events.A biasing transition rate method based on direct MC simulation is proposed to solve the problem in this paper.This method biases transition rates of the components by adding virtual components to them in series to increase the occurrence probability of the rare event,hence the decrease in the variance of MC estimator.Several cases are used to benchmark this method.The results show that the method is effective at modeling system failure and is more efficient at collecting evidence of rare events than the direct MC simulation.The performance is greatly improved by the biasing transition rate method.

  8. Development of Safety Culture Assessment Strategy for Korean NPP

    International Nuclear Information System (INIS)

    Park, Jung Hwan; Kim, Jong Hyun

    2014-01-01

    This paper aims at developing the requirements for a method to evaluate the operational safety culture, evaluating currently available methods based on the requirements, and suggesting a method to evaluate and improve the operational safety culture for Korean nuclear power plants. This paper reviews the widely-used methods to assess safety culture for NPPs and their basis. Then, this paper develops the requirements for the method to evaluate operational safety culture for Korean NPPs. Based on these requirements, Korean Safety Culture Indicators (KSCI) and evaluation measures are also suggested. Finally this paper proposes the guidelines to develop improvements to safety culture from the evaluation results

  9. Development of Safety Culture Assessment Strategy for Korean NPP

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jung Hwan; Kim, Jong Hyun [KEPCO, Ulsan (Korea, Republic of)

    2014-08-15

    This paper aims at developing the requirements for a method to evaluate the operational safety culture, evaluating currently available methods based on the requirements, and suggesting a method to evaluate and improve the operational safety culture for Korean nuclear power plants. This paper reviews the widely-used methods to assess safety culture for NPPs and their basis. Then, this paper develops the requirements for the method to evaluate operational safety culture for Korean NPPs. Based on these requirements, Korean Safety Culture Indicators (KSCI) and evaluation measures are also suggested. Finally this paper proposes the guidelines to develop improvements to safety culture from the evaluation results.

  10. Healthcare professionals’ views of feedback on patient safety culture assessment.

    OpenAIRE

    Zwijnenberg, N.C.; Hendriks, M.; Hoogervorst-Schilp, J.; Wagner, C.

    2016-01-01

    Background: By assessing patient safety culture, healthcare providers can identify areas for improvement in patient safety culture. To achieve this, these assessment outcomes have to be relevant and presented clearly. The aim of our study was to explore healthcare professionals’ views on the feedback of a patient safety culture assessment. Methods: Twenty four hospitals participated in a patient safety culture assessment in 2012. Hospital departments received feedback in a report and on a web...

  11. Safety analysis and risk assessment handbook

    International Nuclear Information System (INIS)

    Peterson, V.L.; Colwell, R.G.; Dickey, R.L.

    1997-01-01

    This Safety Analysis and Risk Assessment Handbook (SARAH) provides guidance to the safety analyst at the Rocky Flats Environmental Technology Site (RFETS) in the preparation of safety analyses and risk assessments. Although the older guidance (the Rocky Flats Risk Assessment Guide) continues to be used for updating the Final Safety Analysis Reports developed in the mid-1980s, this new guidance is used with all new authorization basis documents. With the mission change at RFETS came the need to establish new authorization basis documents for its facilities, whose functions had changed. The methodology and databases for performing the evaluations that support the new authorization basis documents had to be standardized, to avoid the use of different approaches and/or databases for similar accidents in different facilities. This handbook presents this new standardized approach. The handbook begins with a discussion of the requirements of the different types of authorization basis documents and how to choose the one appropriate for the facility to be evaluated. It then walks the analyst through the process of identifying all the potential hazards in the facility, classifying them, and choosing the ones that need to be analyzed further. It then discusses the methods for evaluating accident initiation and progression and covers the basic steps in a safety analysis, including consequence and frequency binning and risk ranking. The handbook lays out standardized approaches for determining the source terms of the various accidents (including airborne release fractions, leakpath factors, etc.), the atmospheric dispersion factors appropriate for Rocky Flats, and the methods for radiological and chemical consequence assessments. The radiological assessments use a radiological open-quotes templateclose quotes, a spreadsheet that incorporates the standard values of parameters, whereas the chemical assessments use the standard codes ARCHIE and ALOHA

  12. A hierarchical network modeling method for railway tunnels safety assessment

    Science.gov (United States)

    Zhou, Jin; Xu, Weixiang; Guo, Xin; Liu, Xumin

    2017-02-01

    Using network theory to model risk-related knowledge on accidents is regarded as potential very helpful in risk management. A large amount of defects detection data for railway tunnels is collected in autumn every year in China. It is extremely important to discover the regularities knowledge in database. In this paper, based on network theories and by using data mining techniques, a new method is proposed for mining risk-related regularities to support risk management in railway tunnel projects. A hierarchical network (HN) model which takes into account the tunnel structures, tunnel defects, potential failures and accidents is established. An improved Apriori algorithm is designed to rapidly and effectively mine correlations between tunnel structures and tunnel defects. Then an algorithm is presented in order to mine the risk-related regularities table (RRT) from the frequent patterns. At last, a safety assessment method is proposed by consideration of actual defects and possible risks of defects gained from the RRT. This method cannot only generate the quantitative risk results but also reveal the key defects and critical risks of defects. This paper is further development on accident causation network modeling methods which can provide guidance for specific maintenance measure.

  13. Use of electronic group method in assessing food safety training needs and delivery methods among international college students in the U.S.

    Science.gov (United States)

    Garden-Robinson, Julie; Eighmy, Myron A; Lyonga, Agnes Ngale

    2010-12-01

    The purpose of this study was to determine the types of unfamiliar foods international students in the U.S. encounter and to assess food safety information that international students would like to receive for mitigating risks associated with handling and preparing unfamiliar foods. The study identified preferred instructional delivery methods and media for receiving food safety training or information. An electronic group method was used for this study. The electronic group method was chosen to maximize group efficiency by allowing participants to share ideas simultaneously and anonymously with minimal use of time and resources.Types of different (unfamiliar) foods were grouped into major categories. Fast and ready-to-eat foods, and processed and frozen foods constituted a major change for some international students, who were accustomed to homemade and fresh foods in their countries. Participants were interested in receiving information about how to safely handle and prepare unfamiliar foods in their new environment. Preferred methods for receiving food safety information included written materials, online publications, presentations, and materials provided during student orientation. Food packages, websites, and television programs were other preferred methods of receiving food safety information. Copyright © 2010 Elsevier Ltd. All rights reserved.

  14. A simplified method for quantitative assessment of the relative health and safety risk of environmental management activities

    International Nuclear Information System (INIS)

    Eide, S.A.; Smith, T.H.; Peatross, R.G.; Stepan, I.E.

    1996-09-01

    This report presents a simplified method to assess the health and safety risk of Environmental Management activities of the US Department of Energy (DOE). The method applies to all types of Environmental Management activities including waste management, environmental restoration, and decontamination and decommissioning. The method is particularly useful for planning or tradeoff studies involving multiple conceptual options because it combines rapid evaluation with a quantitative approach. The method is also potentially applicable to risk assessments of activities other than DOE Environmental Management activities if rapid quantitative results are desired

  15. Integrated Deterministic-Probabilistic Safety Assessment Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Kudinov, P.; Vorobyev, Y.; Sanchez-Perea, M.; Queral, C.; Jimenez Varas, G.; Rebollo, M. J.; Mena, L.; Gomez-Magin, J.

    2014-02-01

    IDPSA (Integrated Deterministic-Probabilistic Safety Assessment) is a family of methods which use tightly coupled probabilistic and deterministic approaches to address respective sources of uncertainties, enabling Risk informed decision making in a consistent manner. The starting point of the IDPSA framework is that safety justification must be based on the coupling of deterministic (consequences) and probabilistic (frequency) considerations to address the mutual interactions between stochastic disturbances (e.g. failures of the equipment, human actions, stochastic physical phenomena) and deterministic response of the plant (i.e. transients). This paper gives a general overview of some IDPSA methods as well as some possible applications to PWR safety analyses. (Author)

  16. Method for quantitative assessment of nuclear safety computer codes

    International Nuclear Information System (INIS)

    Dearien, J.A.; Davis, C.B.; Matthews, L.J.

    1979-01-01

    A procedure has been developed for the quantitative assessment of nuclear safety computer codes and tested by comparison of RELAP4/MOD6 predictions with results from two Semiscale tests. This paper describes the developed procedure, the application of the procedure to the Semiscale tests, and the results obtained from the comparison

  17. Health, safety and environment risk assessment in gas pipelines by indexing method:case of Kermanshah Sanandaj oil pipeline

    OpenAIRE

    Y. Hamidi; I. Mohamadfam; M. Motamedzadeh

    2009-01-01

    Background and AimsUsing pipelines for oil products transportation involves ranges of safety, health and environmental risks, this option however, is dominant with numerous  advantages. The purpose of this study was; relative risk assessment of abovementioned risk in Kermanshah-Sanandaj Oil Pipeline.MethodsThe method used in this study was Kent Muhlbauer method in which relative risk was assessed using third-party damage, corrosion, design, incorrect operations and leak impact  factor.Results...

  18. Research on consequence analysis method for probabilistic safety assessment of nuclear fuel facilities (4). Investigation of safety evaluation method for fire and explosion incidents

    International Nuclear Information System (INIS)

    Abe, Hitoshi; Tashiro, Shinsuke; Ueda, Yoshinori

    2010-01-01

    A special committee on 'Research on the analysis methods for accident consequence of nuclear fuel facilities (NFFs)' was organized by the Atomic Energy Society of Japan (AESJ) under the entrustment of Japan Atomic Energy Agency (JAEA). The committee aims to research on the state-of-the-art consequence analysis method for Probabilistic Safety Assessment (PSA) of NFFs, such as fuel reprocessing and fuel fabrication facilities. The objective of this research is to obtain the useful information related to the establishment of quantitative performance objectives and to risk-informed regulation through qualifying issues needed to be resolved for applying PSA to NFFs. The research activities of the committee were mainly focused on the analysis method of consequences for postulated accidents with potentially large consequences in NFFs, e.g., events of criticality, spill of molten glass, hydrogen explosion, boiling of radioactive solution, and fire (including rapid decomposition of TBP complexes), resulting in the release of radio active materials into the environment. The results of the research were summarized in a series of six reports, which consist of a review report and five technical ones. In this technical report, the research results about basic experimental data and the method for safety evaluation of fire and explosion incidents were summarized. (author)

  19. Application of fuzzy set theory for safety culture and safety management assessment of Kartini research reactor

    International Nuclear Information System (INIS)

    Syarip; Hauptmanns, U.

    2000-01-01

    The safety culture status of nuclear power plant is usually assessed through interview and/or discussions with personnel and management in plant, and an assessment of the pertinent documentation. The approach for safety culture assessment described in IAEA Safety Series, make uses of a questionnaire composed of questions which require 'Yes' or 'No' as an answer. Hence, it is basically a check-list approach which is quite common for safety assessments in industry. Such a procedure ignores the fact that the expert answering the question usually has knowledge which goes far beyond a mere binary answer. Additionally, many situations cannot readily be described in such restricted terms. Therefore, it was developed a checklist consisting of questions which are formulated such that they require more than a simple 'yes' or 'no' as an answer. This allows one to exploit the expert knowledge of the analyst appropriately by asking him to qualify the degree of compliance of each of the topics examined. The method presented has proved useful in assessing the safety culture and quality of safety management of the research reactor. The safety culture status and the quality of safety management of Kartini research reactor is rated as 'average'. The method is also flexible and allows one to add questions to existing areas or to introduce new areas covering related topics

  20. HSE's safety assessment principles for criticality safety

    International Nuclear Information System (INIS)

    Simister, D N; Finnerty, M D; Warburton, S J; Thomas, E A; Macphail, M R

    2008-01-01

    The Health and Safety Executive (HSE) published its revised Safety Assessment Principles for Nuclear Facilities (SAPs) in December 2006. The SAPs are primarily intended for use by HSE's inspectors when judging the adequacy of safety cases for nuclear facilities. The revised SAPs relate to all aspects of safety in nuclear facilities including the technical discipline of criticality safety. The purpose of this paper is to set out for the benefit of a wider audience some of the thinking behind the final published words and to provide an insight into the development of UK regulatory guidance. The paper notes that it is HSE's intention that the Safety Assessment Principles should be viewed as a reflection of good practice in the context of interpreting primary legislation such as the requirements under site licence conditions for arrangements for producing an adequate safety case and for producing a suitable and sufficient risk assessment under the Ionising Radiations Regulations 1999 (SI1999/3232 www.opsi.gov.uk/si/si1999/uksi_19993232_en.pdf). (memorandum)

  1. An application of probabilistic safety assessment methods to model aircraft systems and accidents

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Guridi, G.; Hall, R.E.; Fullwood, R.R.

    1998-08-01

    A case study modeling the thrust reverser system (TRS) in the context of the fatal accident of a Boeing 767 is presented to illustrate the application of Probabilistic Safety Assessment methods. A simplified risk model consisting of an event tree with supporting fault trees was developed to represent the progression of the accident, taking into account the interaction between the TRS and the operating crew during the accident, and the findings of the accident investigation. A feasible sequence of events leading to the fatal accident was identified. Several insights about the TRS and the accident were obtained by applying PSA methods. Changes proposed for the TRS also are discussed.

  2. Ageing management by probabilistic safety assessment (PSA) methods

    International Nuclear Information System (INIS)

    Das, M.; Bhawal, R.N.; Maiti, S.C.

    1994-01-01

    The process and safety system of a nuclear power plant must achieve the reliability/availability target throughout the plant life or for extended plant life. It is therefore necessary to assess the trend of component or system ageing and to take preventive measures so that ageing effect can be counter balanced. In this paper a mathematical model has been established to predict ageing effect and to find out time dependent inspection or test interval to upgrade the system availability. (author). 5 figs

  3. Healthcare professionals? views on feedback of a patient safety culture assessment

    OpenAIRE

    Zwijnenberg, Nicolien C.; Hendriks, Michelle; Hoogervorst-Schilp, Janneke; Wagner, Cordula

    2016-01-01

    Background By assessing patient safety culture, healthcare providers can identify areas for improvement in patient safety culture. To achieve this, these assessment outcomes have to be relevant and presented clearly. The aim of our study was to explore healthcare professionals? views on the feedback of a patient safety culture assessment. Methods Twenty four hospitals participated in a patient safety culture assessment in 2012. Hospital departments received feedback in a report and on a websi...

  4. Software Safety Life cycle and Method of POSAFE-Q System

    International Nuclear Information System (INIS)

    Lee, Jang-Soo; Kwon, Kee-Choon

    2006-01-01

    This paper describes the relationship between the overall safety life cycle and the software safety life cycle during the development of the software based safety systems of Nuclear Power Plants. This includes the design and evaluation activities of components as well as the system. The paper also compares the safety life cycle and planning activities defined in IEC 61508 with those in IEC 60880, IEEE 7-4.3.2, and IEEE 1228. Using the KNICS project as an example, software safety life cycle and safety analysis methods applied to the POSAFE-Q are demonstrated. KNICS software safety life cycle is described by comparing to the software development, testing, and safety analysis process with international standards. The safety assessment of the software for POSAFE-Q is a joint Korean German project. The assessment methods applied in the project and the experiences gained from this project are presented

  5. Probabilistic safety assessment for research reactors

    International Nuclear Information System (INIS)

    1986-12-01

    Increasing interest in using Probabilistic Safety Assessment (PSA) methods for research reactor safety is being observed in many countries throughout the world. This is mainly because of the great ability of this approach in achieving safe and reliable operation of research reactors. There is also a need to assist developing countries to apply Probabilistic Safety Assessment to existing nuclear facilities which are simpler and therefore less complicated to analyse than a large Nuclear Power Plant. It may be important, therefore, to develop PSA for research reactors. This might also help to better understand the safety characteristics of the reactor and to base any backfitting on a cost-benefit analysis which would ensure that only necessary changes are made. This document touches on all the key aspects of PSA but placed greater emphasis on so-called systems analysis aspects rather than the in-plant or ex-plant consequences

  6. Elaboration of methods for assessment of radio-ecological safety state of objects, situated on the territories contaminated with Chernobyl radionuclides

    International Nuclear Information System (INIS)

    Saltanov, Eugene; Saltanova, Irina

    2008-01-01

    The main purpose of assessment of radio-ecological state of object is to elaborate recommendations to reduce both radiation dose and negative action of other contaminators on human organism. The basis of objects' ecological safety assessment is considering complex influence of multiple negative factors, such as radioactive contamination, firstly, and air, water, soil and noise pollution, secondly. The objects of assessments are social, industrial, rural enterprises and their production: school buildings and territories, all kinds of recreational institutions, civil buildings, etc. The described method is embodied in a computer program, which enables calculation of integral indicator of contamination and gives information about object's safety state. The results of the work may be proposed to the corresponding supervisor institutions as a prototype of practical guidance to control ecological state of the objects and territories. Particularly, the proposed methods are necessary to determine the order of measures, normally undertaken to deactivate objects, and to provide unified approach to radio-ecological safety assessment of objects, situated in the territories contaminated with Chernobyl radionuclides. (author)

  7. National Waste Repository Novi Han operational safety analysis report. Safety assessment methodology

    International Nuclear Information System (INIS)

    2003-01-01

    The scope of the safety assessment (SA), presented includes: waste management functions (acceptance, conditioning, storage, disposal), inventory (current and expected in the future), hazards (radiological and non-radiological) and normal and accidental modes. The stages in the development of the SA are: criteria selection, information collection, safety analysis and safety assessment documentation. After the review the facilities functions and the national and international requirements, the criteria for safety level assessment are set. As a result from the 2nd stage actual parameters of the facility, necessary for safety analysis are obtained.The methodology is selected on the base of the comparability of the results with the results of previous safety assessments and existing standards and requirements. The procedure and requirements for scenarios selection are described. A radiological hazard categorisation of the facilities is presented. Qualitative hazards and operability analysis is applied. The resulting list of events are subjected to procedure for prioritization by method of 'criticality analysis', so the estimation of the risk is given for each event. The events that fall into category of risk on the boundary of acceptability or are unacceptable are subjected to the next steps of the analysis. As a result the lists with scenarios for PSA and possible design scenarios are established. PSA logical modeling and quantitative calculations of accident sequences are presented

  8. Failure rate data for fusion safety and risk assessment

    International Nuclear Information System (INIS)

    Cadwallader, L.C.

    1993-01-01

    The Fusion Safety Program (FSP) at the Idaho National Engineering Laboratory (INEL) conducts safety research in materials, chemical reactions, safety analysis, risk assessment, and in component research and development to support existing magnetic fusion experiments and also to promote safety in the design of future experiments. One of the areas of safety research is applying probabilistic risk assessment (PRA) methods to fusion experiments. To apply PRA, we need a fusion-relevant radiological dose code and a component failure rate data base. This paper describes the FSP effort to develop a failure rate data base for fusion-specific components

  9. [Agricultural biotechnology safety assessment].

    Science.gov (United States)

    McClain, Scott; Jones, Wendelyn; He, Xiaoyun; Ladics, Gregory; Bartholomaeus, Andrew; Raybould, Alan; Lutter, Petra; Xu, Haibin; Wang, Xue

    2015-01-01

    Genetically modified (GM) crops were first introduced to farmers in 1995 with the intent to provide better crop yield and meet the increasing demand for food and feed. GM crops have evolved to include a thorough safety evaluation for their use in human food and animal feed. Safety considerations begin at the level of DNA whereby the inserted GM DNA is evaluated for its content, position and stability once placed into the crop genome. The safety of the proteins coded by the inserted DNA and potential effects on the crop are considered, and the purpose is to ensure that the transgenic novel proteins are safe from a toxicity, allergy, and environmental perspective. In addition, the grain that provides the processed food or animal feed is also tested to evaluate its nutritional content and identify unintended effects to the plant composition when warranted. To provide a platform for the safety assessment, the GM crop is compared to non-GM comparators in what is typically referred to as composition equivalence testing. New technologies, such as mass spectrometry and well-designed antibody-based methods, allow better analytical measurements of crop composition, including endogenous allergens. Many of the analytical methods and their intended uses are based on regulatory guidance documents, some of which are outlined in globally recognized documents such as Codex Alimentarius. In certain cases, animal models are recommended by some regulatory agencies in specific countries, but there is typically no hypothesis or justification of their use in testing the safety of GM crops. The quality and standardization of testing methods can be supported, in some cases, by employing good laboratory practices (GLP) and is recognized in China as important to ensure quality data. Although the number of recommended, in some cases, required methods for safety testing are increasing in some regulatory agencies, it should be noted that GM crops registered to date have been shown to be

  10. Safety and security risk assessments--now demystified!

    Science.gov (United States)

    White, Donald E

    2011-01-01

    Safety/security risk assessments no longer need to spook nor baffle healthcare safety/security managers. This grid template provides at-at-glance quick lookup of the possible threats, the affected people and things, a priority ranking of these risks, and a workable solution for each risk. Using the standard document, spreadsheet, or graphics software already available on your computer, you can easily use a scientific method to produce professional looking risk assessments that get quickly understood by both senior managers and first responders alike!

  11. On the fundamentals of nuclear reactor safety assessment. Inherent threats and their implications

    Energy Technology Data Exchange (ETDEWEB)

    Hyvaerinen, J. [Finnish Centre for Radiation and Nuclear Safety, Helsinki (Finland). Nuclear Safety Dept.

    1996-12-01

    The thesis addresses some fundamental questions related to implementation and assessment of nuclear safety. The safety principles and assessment methods are described, followed by descriptions of selected novel technical challenges to nuclear safety. The novel challenges encompass a wide variety of technical issues, thus providing insights on the limitations of conventional safety assessment methods. Study of the limitations suggests means to improve nuclear reactor design criteria and safety assessment practices. The novel safety challenges discussed are (1) inherent boron dilution in PWRs, (2) metallic insulation performance with respect to total loss of emergency cooling systems in a loss-of-coolant accident, and (3) horizontal steam generator heat transfer performance at natural circulation conditions. (50 refs.).

  12. On the fundamentals of nuclear reactor safety assessment. Inherent threats and their implications

    International Nuclear Information System (INIS)

    Hyvaerinen, J.

    1996-12-01

    The thesis addresses some fundamental questions related to implementation and assessment of nuclear safety. The safety principles and assessment methods are described, followed by descriptions of selected novel technical challenges to nuclear safety. The novel challenges encompass a wide variety of technical issues, thus providing insights on the limitations of conventional safety assessment methods. Study of the limitations suggests means to improve nuclear reactor design criteria and safety assessment practices. The novel safety challenges discussed are (1) inherent boron dilution in PWRs, (2) metallic insulation performance with respect to total loss of emergency cooling systems in a loss-of-coolant accident, and (3) horizontal steam generator heat transfer performance at natural circulation conditions. (50 refs.)

  13. The role of risk assessment and safety analysis in integrated safety assessments

    International Nuclear Information System (INIS)

    Niall, R.; Hunt, M.; Wierman, T.E.

    1990-01-01

    To ensure that the design and operation of both nuclear and non- nuclear hazardous facilities is acceptable, and meets all societal safety expectations, a rigorous deterministic and probabilistic assessment is necessary. An approach is introduced, founded on the concept of an ''Integrated Safety Assessment.'' It merges the commonly performed safety and risk analyses and uses them in concert to provide decision makers with the necessary depth of understanding to achieve ''adequacy.'' 3 refs., 1 fig

  14. Risk prediction, safety analysis and quantitative probability methods - a caveat

    International Nuclear Information System (INIS)

    Critchley, O.H.

    1976-01-01

    Views are expressed on the use of quantitative techniques for the determination of value judgements in nuclear safety assessments, hazard evaluation, and risk prediction. Caution is urged when attempts are made to quantify value judgements in the field of nuclear safety. Criteria are given the meaningful application of reliability methods but doubts are expressed about their application to safety analysis, risk prediction and design guidances for experimental or prototype plant. Doubts are also expressed about some concomitant methods of population dose evaluation. The complexities of new designs of nuclear power plants make the problem of safety assessment more difficult but some possible approaches are suggested as alternatives to the quantitative techniques criticized. (U.K.)

  15. Human reliability analysis for probabilistic safety assessments - review of methods and issues

    International Nuclear Information System (INIS)

    Srinivas, G.; Guptan, Rajee; Malhotra, P.K.; Ghadge, S.G.; Chandra, Umesh

    2011-01-01

    It is well known that the two major events in World Nuclear Power Plant Operating history, namely the Three Mile Island and Chernobyl, were Human failure events. Subsequent to these two events, several significant changes have been incorporated in Plant Design, Control Room Design and Operator Training to reduce the possibility of Human errors during plant transients. Still, human error contribution to Risk in Nuclear Power Plant operations has been a topic of continued attention for research, development and analysis. Probabilistic Safety Assessments attempt to capture all potential human errors with a scientifically computed failure probability, through Human Reliability Analysis. Several methods are followed by different countries to quantify the Human error probability. This paper reviews the various popular methods being followed, critically examines them with reference to their criticisms and brings out issues for future research. (author)

  16. Classifying Secondary Task Driving Safety Using Method of F-ANP

    Directory of Open Access Journals (Sweden)

    Lisheng Jin

    2015-02-01

    Full Text Available This study was designed to build an evaluation system for secondary task driving safety by using method of Fuzzy Analytic Network Process (F-ANP. Forty drivers completed driving on driving simulator while interacting with or without a secondary task. Measures of fixations, saccades, and vehicle running status were analyzed. According to five experts' opinions, a hierarchical model for secondary task driving safety evaluation was built. The hierarchical model was divided into three levels: goal, assessment dimension, and criteria. Seven indexes make up the level of criteria, and the assessment dimension includes two clusters: vehicle control risk and driver eye movement risk. By method of F-ANP, the priorities of the criteria and the subcriteria were determined. Furthermore, to rank the driving safety, an approach based on the principle of maximum membership degree was adopted. At last, a case study of secondary task driving safety evaluation by forty drivers using the proposed method was done. The results indicated that the application of the proposed method is practically feasible and adoptable for secondary task driving safety evaluation.

  17. Visualization of Safety Assessment Result Using GIS in SITES

    International Nuclear Information System (INIS)

    Yun, Bong-Yo; Park, Joo Wan; Park, Se-Moon; Kim, Chang-Lak

    2006-01-01

    Site Information and Total Environmental database management System (SITES) is an integrated program for overall data analysis, environmental monitoring, and safety analysis that are produced from the site investigation and environmental assessment of the relevant nuclear facility. SITES is composed of three main modules such as Site Environment Characterization database for Unified and Reliable Evaluation system (SECURE), Safety Assessment INTegration system (SAINT) and Site Useful Data Analysis and ALarm system (SUDAL). The visualization function of safety assessment and environmental monitoring results is designed. This paper is to introduce the visualization design method using Geographic Information System (GIS) for SITES

  18. A study on the methodology of probabilistic safety assessment for KALIMER

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwan Seong; Kwon, Young Min; Lee, Yong Bum; Jeong, Hae Yong; Yang, Joon Eon; Ha, Kyu Suk; Hahn, Do Hee [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-03-01

    Existing Probabilistic Safety Assessment(PSA) is a method for Light Water Reactor or Pressurized Heavy Water Reactor. Because KALIMER is different from these reactor, the new methodology of PSA need to be developed. In this paper, the PSA of Power Reactor Inherently Safety Module(PRISM) is analyzed, and Initiating Event such as Experiential Assessment, Logical Assessment and Failure Mode Effect Analysis(FMEA) is reviewed. Also, Pipe Damage Frequency Method is suggested for KALIMER. And the Reliability Physical method of Passive System, which is a chief safety system of KALIMER, is reviewed and its applicability is investigated. Finally, for the Preliminary PSA of KALIMER, Intermediate Heat Transfer System is analyzed. 23 refs., 10 figs., 13 tabs. (Author)

  19. Method of safety evaluation in nuclear power plants

    International Nuclear Information System (INIS)

    Kuraszkiewicz, P.; Zahn, P.

    1988-01-01

    A novel quantitative technique for evaluating safety of subsystems of nuclear power plants based on expert estimations is presented. It includes methods of mathematical psychology recognizing the effect of subjective factors in the expert estimates and, consequently, contributes to further objectification of evaluation. It may be applied to complementing probabilistic safety assessment. As a result of such evaluations a characteristic 'safety of nuclear power plants' is obtained. (author)

  20. Comparison between Canadian probabilistic safety assessment methods formulated by Atomic Energy of Canada limited and probabilistic risk assessment methods

    International Nuclear Information System (INIS)

    Shapiro, H.S.; Smith, J.E.

    1989-01-01

    The procedures used by Atomic Energy of Canada Limited (AECL) to perform probabilistic safety assessments (PRAs) differ somewhat from conventionally accepted probabilistic risk assessment (PRA) procedures used elsewhere. In Canada, PSA is used by AECL as an audit tool for an evolving design. The purpose is to assess the safety of the plant in engineering terms. Thus, the PSA procedures are geared toward providing engineering feedback so that necessary changes can be made to the design at an early stage, input can be made to operating procedures, and test and maintenance programs can be optimized in terms of costs. Most PRAs, by contrast, are performed in plants that are already built. Their main purpose is to establish the core melt frequency and the risk to the public due to core melt. Also, any design modification is very expensive. The differences in purpose and timing between PSA and PRA have resulted in differences in methodology and scope. The PSA procedures are used on all plants being designed by AECL

  1. Development of safety assessment method for human intrusion scenario in Japan. Part 1. Drilling scenario database for safety assessment of geological disposal (Contract research)

    International Nuclear Information System (INIS)

    Nagasawa, Hirokazu; Takeda, Seiji; Kimura, Hideo; Sasaki, Toshihisa

    2010-11-01

    In deep geological disposal or intermediate depth disposal, human intrusion, i.e. accidental excavation or drilling into the disposal site, may make a direct or an indirect effect on the disposal system. Safety assessment method for the human intrusion scenario, that is, the evaluation code of radiological effect from the human intrusion and the data to examine the reduction of the probability of the human intrusion occurring, is essential for the future safety regulation. Assuming that drilling action into the disposal site leads to the human proximity to the radioactive waste or the damage to the barrier system (drilling scenario), we have collected both the data on borehole drilling implemented in Japan and information on actual situation of drilling activities. Based on the data and information, we provide concrete exposure scenarios associated with borehole drilling in the vicinity of the repository and model for estimating the frequency on borehole reaching the depth of repository. The frequency is characterized with the relation to objective of excavation, geographical features, and region in Japan etc. We have developed an assembly of the information mentioned above as database, including the model parameters used in the code to assess radiation dose for drilling scenario. (author)

  2. Safety assessment of geologic repositories for nuclear waste

    International Nuclear Information System (INIS)

    Bartlett, J.W.; Burkholder, H.C.; Winegardner, W.K.

    1977-01-01

    Consideration of geologic isolation for final disposition of radioactive wastes has led to the need for evaluation of the safety of the concept. Such evaluations require consideration of factors not encountered in conventional risk analysis: consequences at times and places far removed from the repository site; indirect, complex, and alternative pathways between the waste and the point of potential consequences; a highly limited data base; and limited opportunity for experimental verification of results. R and D programs to provide technical safety evaluations are under way. Three methods are being considered for the probabilistic aspects of the evaluations: fault tree analysis, repository simulation analysis, and system stability analysis. Nuclide transport models, currently in a relatively advanced state of development, are used to evaluate consequences of postulated loss of geologic isolation. This paper outlines the safety assessment methods, unique features of the assessment problem that affect selection of methods and reliability of results, and available results. It also discusses potential directions for future work

  3. Preliminary investigation on reliability assessment of passive safety system

    International Nuclear Information System (INIS)

    Huang Changfan; Kuang Bo

    2012-01-01

    The reliability evaluation of passive safety system plays an important part in probabilistic safety assessment (PSA) of nuclear power plant applying passive safety design, which depends quantitatively on reliabilities of passive safety system. According to the object of reliability assessment of passive safety system, relevant parameters are identified. Then passive system behavior during accident scenarios are studied. A practical example of this method is given for the case of reliability assessment of AP1000 passive heat removal system in loss of normal feedwater accident. Key and design parameters of PRHRS are identified and functional failure criteria are established. Parameter combinations acquired by Latin hyper~ cube sampling (LHS) in possible parametric ranges are input and calculations of uncertainty propagation through RELAP5/MOD3 code are carried out. Based on the calculations, sensitivity assessment on PRHRS functional criteria and reliability evaluation of the system are presented, which might provide further PSA with PRHR system reliability. (authors)

  4. Method to Find Recovery Event Combinations in Probabilistic Safety Assessment

    International Nuclear Information System (INIS)

    Jung, Woo Sik; Riley, Jeff

    2016-01-01

    These research activities may develop mathematical methods, engineering analyses, and business processes. The research activities of the project covered by this scope are directed toward the specific issues of implementing the methods and strategies on a computational platform, identifying the features and enhancements to EPRI tools that would be necessary to realize significant improvements to the risk assessments performed by the end user. Fault tree analysis is extensively and successfully applied to the risk assessment of safety-critical systems such as nuclear, chemical and aerospace systems. The fault tree analysis is being used together with an event tree analysis in PSA of nuclear power plants. Fault tree solvers for a PSA are mostly based on the cutset-based algorithm. They generate minimal cut sets (MCSs) from a fault tree. The most popular fault tree solver in the PSA industry is FTREX. During the course of this project, certain technical issues (see Sections 2 to 5) have been identified that need to be addressed regarding how minimal cut sets are generated and quantified. The objective of this scope of the work was to develop new methods or techniques to address these technical limitations. By turning on all the cutset initiators (%1, %2, %3, %), all the possible minimal cut sets can be calculated easier than with the original fault tree. It is accomplished by the fact that the number of events in the minimal cut sets are significantly reduced by using cutset initiators instead of random failure events. And byy turning on a few chosen cutset initiators and turning off the other cutset initiators, minimal cut sets of the selected cutset initiator(s) can be easily calculated. As explained in the previous Sections, there is no way to calculate these minimal cut sets by turning off/on the random failure events in the original fault tree

  5. Method to Find Recovery Event Combinations in Probabilistic Safety Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Woo Sik [Sejong University, Seoul (Korea, Republic of); Riley, Jeff [Electric Power Research, Palo Alto (United States)

    2016-05-15

    These research activities may develop mathematical methods, engineering analyses, and business processes. The research activities of the project covered by this scope are directed toward the specific issues of implementing the methods and strategies on a computational platform, identifying the features and enhancements to EPRI tools that would be necessary to realize significant improvements to the risk assessments performed by the end user. Fault tree analysis is extensively and successfully applied to the risk assessment of safety-critical systems such as nuclear, chemical and aerospace systems. The fault tree analysis is being used together with an event tree analysis in PSA of nuclear power plants. Fault tree solvers for a PSA are mostly based on the cutset-based algorithm. They generate minimal cut sets (MCSs) from a fault tree. The most popular fault tree solver in the PSA industry is FTREX. During the course of this project, certain technical issues (see Sections 2 to 5) have been identified that need to be addressed regarding how minimal cut sets are generated and quantified. The objective of this scope of the work was to develop new methods or techniques to address these technical limitations. By turning on all the cutset initiators (%1, %2, %3, %), all the possible minimal cut sets can be calculated easier than with the original fault tree. It is accomplished by the fact that the number of events in the minimal cut sets are significantly reduced by using cutset initiators instead of random failure events. And byy turning on a few chosen cutset initiators and turning off the other cutset initiators, minimal cut sets of the selected cutset initiator(s) can be easily calculated. As explained in the previous Sections, there is no way to calculate these minimal cut sets by turning off/on the random failure events in the original fault tree.

  6. Uncertainty in safety : new techniques for the assessment and optimisation of safety in process industry

    NARCIS (Netherlands)

    Rouvroye, J.L.; Nieuwenhuizen, J.K.; Brombacher, A.C.; Stavrianidis, P.; Spiker, R.Th.E.; Pyatt, D.W.

    1995-01-01

    At this moment there is no standardised method for the assessment for safety in the process industry. Many companies and institutes use qualitative techniques for safety analysis while other companies and institutes use quantitative techniques. The authors of this paper will compare different

  7. Assessment of the safety of foods derived from genetically modified (GM) crops.

    Science.gov (United States)

    König, A; Cockburn, A; Crevel, R W R; Debruyne, E; Grafstroem, R; Hammerling, U; Kimber, I; Knudsen, I; Kuiper, H A; Peijnenburg, A A C M; Penninks, A H; Poulsen, M; Schauzu, M; Wal, J M

    2004-07-01

    This paper provides guidance on how to assess the safety of foods derived from genetically modified crops (GM crops); it summarises conclusions and recommendations of Working Group 1 of the ENTRANSFOOD project. The paper provides an approach for adapting the test strategy to the characteristics of the modified crop and the introduced trait, and assessing potential unintended effects from the genetic modification. The proposed approach to safety assessment starts with the comparison of the new GM crop with a traditional counterpart that is generally accepted as safe based on a history of human food use (the concept of substantial equivalence). This case-focused approach ensures that foods derived from GM crops that have passed this extensive test-regime are as safe and nutritious as currently consumed plant-derived foods. The approach is suitable for current and future GM crops with more complex modifications. First, the paper reviews test methods developed for the risk assessment of chemicals, including food additives and pesticides, discussing which of these methods are suitable for the assessment of recombinant proteins and whole foods. Second, the paper presents a systematic approach to combine test methods for the safety assessment of foods derived from a specific GM crop. Third, the paper provides an overview on developments in this area that may prove of use in the safety assessment of GM crops, and recommendations for research priorities. It is concluded that the combination of existing test methods provides a sound test-regime to assess the safety of GM crops. Advances in our understanding of molecular biology, biochemistry, and nutrition may in future allow further improvement of test methods that will over time render the safety assessment of foods even more effective and informative. Copryright 2004 Elsevier Ltd.

  8. IAEA safety requirements for safety assessment of fuel cycle facilities and activities

    International Nuclear Information System (INIS)

    Jones, G.

    2013-01-01

    The IAEA's Statute authorises the Agency to establish standards of safety for protection of health and minimisation of danger to life and property. In that respect, the IAEA has established a Safety Fundamentals publication which contains ten safety principles for ensuring the protection of workers, the public and the environment from the harmful effects of ionising radiation. A number of these principles require safety assessments to be carried out as a means of evaluating compliance with safety requirements for all nuclear facilities and activities and to determine the measures that need to be taken to ensure safety. The safety assessments are required to be carried out and documented by the organisation responsible for operating the facility or conducting the activity, are to be independently verified and are to be submitted to the regulatory body as part of the licensing or authorisation process. In addition to the principles of the Safety Fundamentals, the IAEA establishes requirements that must be met to ensure the protection of people and the environment and which are governed by the principles in the Safety Fundamentals. The IAEA's Safety Requirements publication 'Safety Assessment for Facilities and Activities', establishes the safety requirements that need to be fulfilled in conducting and maintaining safety assessments for the lifetime of facilities and activities, with specific attention to defence in depth and the requirement for a graded approach to the application of these safety requirements across the wide range of fuel cycle facilities and activities. Requirements for independent verification of the safety assessment that needs to be carried out by the operating organisation, including the requirement for the safety assessment to be periodically reviewed and updated are also covered. For many fuel cycle facilities and activities, environmental impact assessments and non-radiological risk assessments will be required. The

  9. Experiences in assessing safety culture

    International Nuclear Information System (INIS)

    Spitalnik, J.

    2002-01-01

    Based on several Safety Culture self-assessment applications in nuclear organisations, the paper stresses relevant aspects to be considered when programming an assessment of this type. Reasons for assessing Safety Culture, basic principles to take into account, necessary resources, the importance of proper statistical analyses, the feed-back of results, and the setting up of action plans to enhance Safety Culture are discussed. (author)

  10. NPP Krsko periodic safety review. Safety assessment and analyses

    International Nuclear Information System (INIS)

    Basic, I.; Spiler, J.; Thaulez, F.

    2002-01-01

    Definition of a PSR (Periodic Safety Review) project is a comprehensive safety review of a plant after ten years of operation. The objective is a verification by means of a comprehensive review using current methods that the plant remains safe when judged against current safety objectives and practices and that adequate arrangements are in place to maintain plant safety. The overall goals of the NEK PSR Program are defined in compliance with the basic role of a PSR and the current practice typical for most of the countries in EU. This practice is described in the related guides and good practice documents issued by international organizations. The overall goals of the NEK PSR are formulated as follows: to demonstrate that the plant is as safe as originally intended; to evaluate the actual plant status with respect to aging and wear-out identifying any structures, systems or components that could limit the life of the plant in the foreseeable future, and to identify appropriate corrective actions, where needed; to compare current level of safety in the light of modern standards and knowledge, and to identify where improvements would be beneficial for minimizing deviations at justifiable costs. The Krsko PSR will address the following safety factors: Operational Experience, Safety Assessment, EQ and Aging Management, Safety Culture, Emergency Planning, Environmental Impact and Radioactive Waste.(author)

  11. Savannah River Site K-Reactor Probabilistic Safety Assessment

    International Nuclear Information System (INIS)

    Brandyberry, M.D.; Bailey, R.T.; Baker, W.H.; Kearnaghan, D.P.; O'Kula, K.R.; Wittman, R.S.; Woody, N.D.; Amos, C.N.; Weingardt, J.J.

    1992-12-01

    This report gives the results of a Savannah River Site (SRS) K-Reactor Probabilistic Safety Assessment (PSA). Measures of adverse consequences to health and safety resulting from representations of severe accidents in SRS reactors are presented. In addition, the report gives a summary of the methods employed to represent these accidents and to assess the resultant consequences. The report is issued to provide useful information to the U. S. Department of Energy (DOE) on the risk of operation of SRS reactors, for insights into severe accident phenomena that contribute to this risk, and in support of improved bases for other DOE programs in Heavy Water Reactor safety

  12. Mathematical Safety Assessment Approaches for Thermal Power Plants

    Directory of Open Access Journals (Sweden)

    Zong-Xiao Yang

    2014-01-01

    Full Text Available How to use system analysis methods to identify the hazards in the industrialized process, working environment, and production management for complex industrial processes, such as thermal power plants, is one of the challenges in the systems engineering. A mathematical system safety assessment model is proposed for thermal power plants in this paper by integrating fuzzy analytical hierarchy process, set pair analysis, and system functionality analysis. In the basis of those, the key factors influencing the thermal power plant safety are analyzed. The influence factors are determined based on fuzzy analytical hierarchy process. The connection degree among the factors is obtained by set pair analysis. The system safety preponderant function is constructed through system functionality analysis for inherence properties and nonlinear influence. The decision analysis system is developed by using active server page technology, web resource integration, and cross-platform capabilities for applications to the industrialized process. The availability of proposed safety assessment approach is verified by using an actual thermal power plant, which has improved the enforceability and predictability in enterprise safety assessment.

  13. Assessing Knowledge Retention of an Immersive Serious Game vs. a Traditional Education Method in Aviation Safety.

    Science.gov (United States)

    Chittaro, Luca; Buttussi, Fabio

    2015-04-01

    Thanks to the increasing availability of consumer head-mounted displays, educational applications of immersive VR could now reach to the general public, especially if they include gaming elements (immersive serious games). Safety education of citizens could be a particularly promising domain for immersive serious games, because people tend not to pay attention to and benefit from current safety materials. In this paper, we propose an HMD-based immersive game for educating passengers about aviation safety that allows players to experience a serious aircraft emergency with the goal of surviving it. We compare the proposed approach to a traditional aviation safety education method (the safety card) used by airlines. Unlike most studies of VR for safety knowledge acquisition, we do not focus only on assessing learning immediately after the experience but we extend our attention to knowledge retention over a longer time span. This is a fundamental requirement, because people need to retain safety procedures in order to apply them when faced with danger. A knowledge test administered before, immediately after and one week after the experimental condition showed that the immersive serious game was superior to the safety card. Moreover, subjective as well as physiological measurements employed in the study showed that the immersive serious game was more engaging and fear-arousing than the safety card, a factor that can contribute to explain the obtained superior retention, as we discuss in the paper.

  14. Quantitative safety assessment of air traffic control systems through system control capacity

    Science.gov (United States)

    Guo, Jingjing

    Quantitative Safety Assessments (QSA) are essential to safety benefit verification and regulations of developmental changes in safety critical systems like the Air Traffic Control (ATC) systems. Effectiveness of the assessments is particularly desirable today in the safe implementations of revolutionary ATC overhauls like NextGen and SESAR. QSA of ATC systems are however challenged by system complexity and lack of accident data. Extending from the idea "safety is a control problem" in the literature, this research proposes to assess system safety from the control perspective, through quantifying a system's "control capacity". A system's safety performance correlates to this "control capacity" in the control of "safety critical processes". To examine this idea in QSA of the ATC systems, a Control-capacity Based Safety Assessment Framework (CBSAF) is developed which includes two control capacity metrics and a procedural method. The two metrics are Probabilistic System Control-capacity (PSC) and Temporal System Control-capacity (TSC); each addresses an aspect of a system's control capacity. And the procedural method consists three general stages: I) identification of safety critical processes, II) development of system control models and III) evaluation of system control capacity. The CBSAF was tested in two case studies. The first one assesses an en-route collision avoidance scenario and compares three hypothetical configurations. The CBSAF was able to capture the uncoordinated behavior between two means of control, as was observed in a historic midair collision accident. The second case study compares CBSAF with an existing risk based QSA method in assessing the safety benefits of introducing a runway incursion alert system. Similar conclusions are reached between the two methods, while the CBSAF has the advantage of simplicity and provides a new control-based perspective and interpretation to the assessments. The case studies are intended to investigate the

  15. Construction of Earthquake - Proof Safety Evaluaiton Methods for Pipes with Wall Thinning

    International Nuclear Information System (INIS)

    Miyano, H.; Sekimura, N.; Takizawa, M.; Mastumoto, M.

    2012-01-01

    Since the Fukushima Dai-ichi accident, the importance of 'system safety' has been recognized anew. Particularly, system safety assessment of plants in operation from the various degradation perspectives, specifically, transition of time is very important. Accordingly, assessment on degradation will focus on the degradation of functions with passing of time, combined with the changes in the safety standards and concept of safety. Reliability assessment will be made on the consolidation of important functions, and not on individual components. The boundary function of the system will be one of the focus of this study. For the purpose of reliability assessment on the system by evaluating and quantifying the damage (or rupture) risk of piping - method for confirming the integrity of the system through the assessment on the damage (rupture) risk of the system when an external force caused by an earthquake is applied (the system is sound if the damage (rupture) risk is small) was examined on the basis of the prediction results for each of the parts in pipe wall thinning. In the next phase, the prediction results will be verified by tests, whereby, the improvement in reliability will be confirmed, and a combined assessment will be made in relation to the degradation factors of other systems. 'System safety' assessment method of plants in operation will be developed in a manner where a comprehensive assessment on the safety of the entire plant can be made. Specifically, the changes in the conditions, such as material degradations that degrade performance will be assessed on the entire system. Whereby, the risk caused by functional failure (damage) due to degradation will be regarded as the total of risk in the assessment. A framework on safety assessment will be structured, where the degree of safety will be measured by functional degradation, taking into consideration the changes made in the safety standards up to present. (author)

  16. Risk assessment methods in radiotherapy: Probabilistic safety assessment (PSA); Los metodos de analisis de riesgo en radioterapia: Analisis Probabilistico de seguridad (APS)

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez Vera, M. L.; Perez Mulas, A.; Delgado, J. M.; Barrientos Ontero, M.; Somoano, F.; Alvarez Garcia, C.; Rodriguez Marti, M.

    2011-07-01

    The understanding of accidents that have occurred in radiotherapy and the lessons learned from them are very useful to prevent repetition, but there are other risks that have not been detected to date. With a view to identifying and preventing such risks, proactive methods successfully applied in other fields, such as probabilistic safety assessment (PSA), have been developed. (Author)

  17. Assessment of safety regulation using an artificial society

    International Nuclear Information System (INIS)

    Furuta, Kazuo; Nagase, Masaya

    2005-01-01

    This study proposes using an artificial society to assess impacts of safety regulation on the society. The artificial society used in this study is a multi-agent system, which consists of many agents representing companies. The agents cannot survive unless they get profits by producing some products. Safety regulation functions as the business environment, which the agents will evolve to fit to. We modeled this process of survival and adaptation by the genetic algorithm. Using the proposed model, case simulations were performed to compare various regulation styles, and some interesting insights were obtained how regulation style influences behavior of the agents and then productivity and safety level of the industry. In conclusion, an effective method for assessment of safety regulation has been developed, and then several insights were shown in this study

  18. Improvement of numerical simulation methods on safety assessment of the spent fuel storage facility

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    Improvement of numerical simulation methods on safety assessment of the spent fuel storage facility is one of main objectives of JNES activities. For the thermal and structural analyses, the radiative heat transfer analysis code S-FOKS has been developed to reduce computing time and to avoid using large memory area. In order to simulate the specular reflection, a new model (called 'model-2') is planned to install to S-FOKS code. The theoretical values with the specular reflection in simple geometry were lead to verify S-FOKS model-2. (author)

  19. OSART Independent Safety Culture Assessment (ISCA) Guidelines

    International Nuclear Information System (INIS)

    2016-01-01

    Safety culture is understood as an important part of nuclear safety performance. This has been demonstrated by the analysis of significant events such as Chernobyl, Davis Besse, Vandellos II, Asco, Paks, Mihamma and Forsmark, among others. In order to enhance safety culture, one essential activity is to perform assessments. IAEA Safety Standard Series No. GS-R-3, The Management System for Facilitites and Activities, states requirements for continuous improvement of safety culture, of which self, peer and independent safety culture assessments constitute an essential part. In line with this requirement, the Independent Safety Culture Assessment (ISCA) module is offered as an add-on module to the IAEA Operational Safety Review Team (OSART) programme. The OSART programme provides advice and assistance to Member States to enhance the safety of nuclear power plants during commissioning and operation. By including the ISCA module in an OSART mission, the receiving organization benefits from the synergy between the technical and the safety culture aspects of the safety review. The joint operational safety and safety culture assessment provides the organization with the opportunity to better understand the interactions between technical, human, organizational and cultural aspects, helping the organization to take a systemic approach to safety through identifying actions that fully address the root causes of any identified issue. Safety culture assessments provide insight into the fundamental drivers that shape organizational patterns of behaviour, safety consciousness and safety performance. The complex nature of safety culture means that the analysis of the results of such assessments is not as straightforward as for other types of assessment. The benefits of the results of nuclear safety culture assessments are maximized only if appropriate tools and guidance for these assessments is used; hence, this comprehensive guideline has been developed. The methodology explained

  20. Safety assessment of existing highway bridges and viaducts

    NARCIS (Netherlands)

    Maljaars, J.; Steenbergen, R.; Abspoel, L.; Kolstein, M.H.

    2012-01-01

    The assessment of the structural safety of existing br idges and viaducts becomes increasingly important in many countries owing to an increase in traffic loads. Most existing standards, however, are developed for the design of new structures. For this reason, an assessment method for determining

  1. Test and assessment method of Automotive Safety Systems (SSB) particularly to monitor traffic incidents

    Science.gov (United States)

    Pijanowski, B.; Łukjanow, S.; Burliński, R.

    2016-09-01

    The rapid development of telematics, particularly mobile telephony (GSM), wireless data transmission (GPRS) and satellite positioning (GPS) noticeable in the last decade, resulted in an almost unlimited growth of the possibilities for monitoring of mobile objects. These solutions are already widely used in the so-called “Intelligent Transport Systems” - ITS and affect a significant increase for road safety. The article describes a method of testing and evaluation of Car Safety Systems (Polish abbreviation - SSB) especially for monitoring traffic incidents, such as collisions and accidents. The algorithm of SSB testing process is also presented. Tests are performed on the dynamic test bench, part of which is movable platform with car security system mounted on it. Crash tests with a rigid obstacle are carried out instead of destructive attempts to crash test of the entire vehicle which is expensive. The tested system, depending on the simulated traffic conditions, is mounted in such a position and with the use of components, indicated by the manufacturer for the automotive safety system installation in a vehicle, for which it is intended. Then, the tests and assessments are carried out.

  2. Metrics design for safety assessment

    NARCIS (Netherlands)

    Luo, Yaping; van den Brand, M.G.J.

    2016-01-01

    Context:In the safety domain, safety assessment is used to show that safety-critical systems meet the required safety objectives. This process is also referred to as safety assurance and certification. During this procedure, safety standards are used as development guidelines to keep the risk at an

  3. Correlation between safety climate and contractor safety assessment programs in construction.

    Science.gov (United States)

    Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

    2013-12-01

    Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

  4. Safety assessment principles for nuclear plants

    International Nuclear Information System (INIS)

    1992-01-01

    The present Safety Assessment Principles result from the revision of those which were drawn up following a recommendation arising from the Sizewell-B enquiry. The principles presented here relate only to nuclear safety; there is a section on risks from normal operation and accident conditions and the standards against which those risks are assessed. A major part of the document deals with the principles that cover the design of nuclear plants. The revised Safety assessment principles are aimed primarily at the safety assessment of new nuclear plants but they will also be used in assessing existing plants. (UK)

  5. Safety studies on Korean fusion DEMO plant using integrated safety assessment methodology

    International Nuclear Information System (INIS)

    Oh, Kyemin; Kang, Myoung-suk; Heo, Gyunyoung; Kim, Hyoung-chan

    2014-01-01

    Highlights: •The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant. •The concepts of integrated safety assessment methodology (ISAM) that can be applied in addressing regulatory requirements and recognizing safety issues for K-DEMO were emphasized. •Phenomena identification and ranking table (PIRT) was proposed. It can recognize vulnerabilities of systems and identify the gaps in technical areas requiring additional researches. •This work is expected to contribute on the conceptual design of safety features for K-DEMO to design engineers and the guidance for regulatory requirements to licensers. -- Abstract: The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant (K-DEMO) as a part of R and D program through the National Fusion Research Institute of Korea. Even though nuclear regulation and licensing framework is well setup due to the operating and design experience of Pressurized Water Reactors (PWRs) since 1970s, the regulatory authority of South Korea has concerns on the challenge of facing new nuclear facilities including K-DEMO due to the differences in systems, materials, and inherent safety feature from conventional PWRs. Even though the follow-up of the ITER license process facilitates to deal with significant safety issues of fusion facilities, a licensee as well as a licenser should identify the gaps between ITER and DEMO in terms of safety issues. First we reviewed the methods of conducting safety analysis for unprecedented nuclear facilities such as Generation IV reactors, particularly very high temperature reactor (VHTR), which is called as integrated safety assessment methodology (ISAM). Second, the analysis for the conceptual design of K-DEMO on the basis of ISAM was conducted. The ISAM consists of five analytical tools to develop the safety requirements from licensee

  6. Safety studies on Korean fusion DEMO plant using integrated safety assessment methodology

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Kyemin; Kang, Myoung-suk [Kyung Hee University, Youngin-si, Gyeonggi-do 446-701 (Korea, Republic of); Heo, Gyunyoung, E-mail: gheo@khu.ac.kr [Kyung Hee University, Youngin-si, Gyeonggi-do 446-701 (Korea, Republic of); Kim, Hyoung-chan [National Fusion Research Institute, Daejeon-si 305-333 (Korea, Republic of)

    2014-10-15

    Highlights: •The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant. •The concepts of integrated safety assessment methodology (ISAM) that can be applied in addressing regulatory requirements and recognizing safety issues for K-DEMO were emphasized. •Phenomena identification and ranking table (PIRT) was proposed. It can recognize vulnerabilities of systems and identify the gaps in technical areas requiring additional researches. •This work is expected to contribute on the conceptual design of safety features for K-DEMO to design engineers and the guidance for regulatory requirements to licensers. -- Abstract: The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant (K-DEMO) as a part of R and D program through the National Fusion Research Institute of Korea. Even though nuclear regulation and licensing framework is well setup due to the operating and design experience of Pressurized Water Reactors (PWRs) since 1970s, the regulatory authority of South Korea has concerns on the challenge of facing new nuclear facilities including K-DEMO due to the differences in systems, materials, and inherent safety feature from conventional PWRs. Even though the follow-up of the ITER license process facilitates to deal with significant safety issues of fusion facilities, a licensee as well as a licenser should identify the gaps between ITER and DEMO in terms of safety issues. First we reviewed the methods of conducting safety analysis for unprecedented nuclear facilities such as Generation IV reactors, particularly very high temperature reactor (VHTR), which is called as integrated safety assessment methodology (ISAM). Second, the analysis for the conceptual design of K-DEMO on the basis of ISAM was conducted. The ISAM consists of five analytical tools to develop the safety requirements from licensee

  7. Development of safety related technology and infrastructure for safety assessment

    International Nuclear Information System (INIS)

    Venkat Raj, V.

    1997-01-01

    Development and optimum utilisation of any technology calls for the building up of the necessary infrastructure and backup facilities. This is particularly true for a developing country like India and more so for an advanced technology like nuclear technology. Right from the inception of its nuclear power programme, the Indian approach has been to develop adequate infrastructure in various areas such as design, construction, manufacture, installation, commissioning and safety assessment of nuclear plants. This paper deals with the development of safety related technology and the relevant infrastructure for safety assessment. A number of computer codes for safety assessment have been developed or adapted in the areas of thermal hydraulics, structural dynamics etc. These codes have undergone extensive validation through data generated in the experimental facilities set up in India as well as participation in international standard problem exercises. Side by side with the development of the tools for safety assessment, the development of safety related technology was also given equal importance. Many of the technologies required for the inspection, ageing assessment and estimation of the residual life of various components and equipment, particularly those having a bearing on safety, were developed. This paper highlights, briefly, the work carried out in some of the areas mentioned above. (author)

  8. ALARP considerations in criticality safety assessments

    International Nuclear Information System (INIS)

    Bowden, Russell L.; Barnes, Andrew; Thorne, Peter R.; Venner, Jack

    2003-01-01

    Demonstrating that the risk to the public and workers is As Low As Reasonably Practicable (ALARP) is a fundamental requirement of safety cases for nuclear facilities in the United Kingdom. This is embodied in the Safety Assessment Principles (SAPs) published by the Regulator, the essence of which is incorporated within the safety assessment processes of the various nuclear site licensees. The concept of ALARP within criticality safety assessments has taken some time to establish in the United Kingdom. In principle, the licensee is obliged to search for a deterministic criticality safety solution, such as safe geometry vessels and passive control features, rather than placing reliance on active measurement devices and plant administrative controls. This paper presents a consideration of some ALARP issues in relation to the development of criticality safety cases. The paper utilises some idealised examples covering a range of issues facing the criticality safety assessor, including new plant design, operational plant and decommissioning activities. These examples are used to outline the elements of the criticality safety cases and present a discussion of ALARP in the context of criticality safety assessments. (author)

  9. Safety culture assessment developed by JANTI

    International Nuclear Information System (INIS)

    Hamada, Jun

    2009-01-01

    Japan's JCO accident in September 1999 provided a real-life example of what can happen when insufficient attention is paid to safety culture. This accident brought to light the importance of safety culture and reinforced the movement to foster a safety culture. Despite this, accidents and inappropriate conduct have continued to occur. Therefore, there is a strong demand to instill a safety culture throughout the nuclear power industry. In this context, Japan's nuclear power regulator, the Nuclear and Industrial Safety Agency (NISA), decided to include in its safety inspections assessments of the safety culture found in power utilities' routine safety operations to get signs of deterioration in the organizational climate. In 2007, NISA constructed guidelines for their inspectors to carry out these assessments. At the same time, utilities have embarked on their own independent safety culture initiatives, such as revising their technical specifications and building effective PDCA cycle to promote safety culture. In concert with these developments, JANTI has also instituted safety culture assessments. (author)

  10. Establishment of safety goal and its quantification based on risk assessment

    International Nuclear Information System (INIS)

    Miyano, Hiroshi; Muramatsu, Ken

    2017-01-01

    We must clarify the safety objectives sought by society in securing the safety of nuclear reactors and nuclear power plants. For that purpose, it is useful to utilize risk assessment. Quantitative methods including probabilistic risk assessment (PRA) are superior in terms of scientific rationality and quantitative performance compared with conventional deterministic methods, and able to indicate an objective numerical value of safety level. Consequently, quantitative methods can enhance the transparency, consistency, compliance, predictability, and explanatory power of regulatory decisions toward business operators and citizens. Business operators can explain the validity of their own safety assurance activities to regulators and citizens. The goal to be secured becomes clear by incorporating the safety goal into the specific performance goal required for the nuclear power plant from the viewpoint of deep safeguard, and it becomes easy to evaluate the effectiveness of the safety measures. It helps us greatly in judging and selecting the appropriateness of safety measures. It should be noted: the fact that the result of implementing the PRA satisfies the safety goal is not a sufficient condition in the sense of guaranteeing complete safety but a necessary condition. The nuclear power field is a region with large uncertainty, and research/efforts for accuracy improvement and evaluation validity will be required continuously. (A.O.)

  11. Ex-ante assessment of the safety effects of intelligent transport systems.

    Science.gov (United States)

    Kulmala, Risto

    2010-07-01

    There is a need to develop a comprehensive framework for the safety assessment of Intelligent Transport Systems (ITS). This framework should: (1) cover all three dimensions of road safety-exposure, crash risk and consequence, (2) cover, in addition to the engineering effect, also the effects due to behavioural adaptation and (3) be compatible with the other aspects of state of the art road safety theories. A framework based on nine ITS safety mechanisms is proposed and discussed with regard to the requirements set to the framework. In order to illustrate the application of the framework in practice, the paper presents a method based on the framework and the results from applying that method for twelve intelligent vehicle systems in Europe. The framework is also compared to two recent frameworks applied in the safety assessment of intelligent vehicle safety systems. Copyright 2010 Elsevier Ltd. All rights reserved.

  12. Safety assessment and detection method of genetically modified Chinese Kale (Brassica oleracea cv. alboglabra ).

    Science.gov (United States)

    Lin, Chih-Hui; Lu, Chien-Te; Lin, Hsin-Tang; Pan, Tzu-Ming

    2009-03-11

    Sporamins are tuberous storage proteins and account for 80% of soluble protein in sweet potato tubers with trypsin-inhibitory activity. The expression of sporamin protein in transgenic Chinese kale (line BoA 3-1) conferred insecticidal activity toward corn earworm [ Helicoverpa armigera (Hubner)] in a previous report. In this study, we present a preliminary safety assessment of transgenic Chinese kale BoA 3-1. Bioinformatic and simulated gastric fluid (SGF) analyses were performed to evaluate the allergenicity of sporamin protein. The substantial equivalence between transgenic Chinese kale and its wild-type host has been demonstrated by the comparison of important constituents. A reliable real-time polymerase chain reaction (PCR) detection method was also developed to control sample quality. Despite the results of most evaluations in this study being negative, the safety of sporamin in transgenic Chinese kale BoA 3-1 was uncluded because of the allergenic risk revealed by bioinformatic analysis.

  13. Comparison of event tree, fault tree and Markov methods for probabilistic safety assessment and application to accident mitigation

    International Nuclear Information System (INIS)

    James, H.; Harris, M.J.; Hall, S.F.

    1992-01-01

    Probabilistic safety assessment (PSA) is used extensively in the nuclear industry. The main stages of PSA and the traditional event tree method are described. Focussing on hydrogen explosions, an event tree model is compared to a novel Markov model and a fault tree, and unexpected implication for accident mitigation is revealed. (author)

  14. Formal safety assessment based on relative risks model in ship navigation

    Energy Technology Data Exchange (ETDEWEB)

    Hu Shenping [Merchant Marine College, Shanghai Maritime University, 1550, Pudong Dadao, Shanghai 200135 (China)]. E-mail: sphu@mmc.shmtu.edu.cn; Fang Quangen [Merchant Marine College, Shanghai Maritime University, 1550, Pudong Dadao, Shanghai 200135 (China)]. E-mail: qgfang@mmc.shmtu.edu.cn; Xia Haibo [Merchant Marine College, Shanghai Maritime University, 1550, Pudong Dadao, Shanghai 200135 (China)]. E-mail: hbxia@mmc.shmtu.edu.cn; Xi Yongtao [Merchant Marine College, Shanghai Maritime University, 1550, Pudong Dadao, Shanghai 200135 (China)]. E-mail: xiyt@mmc.shmtu.edu.cn

    2007-03-15

    Formal safety assessment (FSA) is a structured and systematic methodology aiming at enhancing maritime safety. It has been gradually and broadly used in the shipping industry nowadays around the world. On the basis of analysis and conclusion of FSA approach, this paper discusses quantitative risk assessment and generic risk model in FSA, especially frequency and severity criteria in ship navigation. Then it puts forward a new model based on relative risk assessment (MRRA). The model presents a risk-assessment approach based on fuzzy functions and takes five factors into account, including detailed information about accident characteristics. It has already been used for the assessment of pilotage safety in Shanghai harbor, China. Consequently, it can be proved that MRRA is a useful method to solve the problems in the risk assessment of ship navigation safety in practice.

  15. Formal safety assessment based on relative risks model in ship navigation

    International Nuclear Information System (INIS)

    Hu Shenping; Fang Quangen; Xia Haibo; Xi Yongtao

    2007-01-01

    Formal safety assessment (FSA) is a structured and systematic methodology aiming at enhancing maritime safety. It has been gradually and broadly used in the shipping industry nowadays around the world. On the basis of analysis and conclusion of FSA approach, this paper discusses quantitative risk assessment and generic risk model in FSA, especially frequency and severity criteria in ship navigation. Then it puts forward a new model based on relative risk assessment (MRRA). The model presents a risk-assessment approach based on fuzzy functions and takes five factors into account, including detailed information about accident characteristics. It has already been used for the assessment of pilotage safety in Shanghai harbor, China. Consequently, it can be proved that MRRA is a useful method to solve the problems in the risk assessment of ship navigation safety in practice

  16. Overview of waste isoltaion safety assessment program and description of source term characterization task at PNL

    International Nuclear Information System (INIS)

    Bradley, D.

    1977-01-01

    A project is being conducted to develop and illustrate the methods and obtain the data necessary to assess the safety of long-term disposal of high-level radioactive waste in geologic formations. The methods and data will initially focus on generic geologic isolation systems but will ultimately be applied to the long-term safety assessment of specific candidate sites that are selected in the NWTS Program. The activities of waste isolation safety assessment (WISAP) are divided into six tasks: (1) Safety Assessment Concepts and Methods, (2) Disruptive Event Analysis, (3) Source Characterization, (4) Transport Modeling, (5) Transport Data and (6) Societal Acceptance

  17. Using a multi-method, user centred, prospective hazard analysis to assess care quality and patient safety in a care pathway

    Directory of Open Access Journals (Sweden)

    Escoto Kamisha

    2007-06-01

    Full Text Available Abstract Background Care pathways can be complex, often involving multiple care providers and as such are recognised as containing multiple opportunities for error. Prospective hazard analysis methods may be useful for evaluating care provided across primary and secondary care pathway boundaries. These methods take into account the views of users (staff and patients when determining where potential hazards may lie. The aim of this study is to evaluate the feasibility of prospective hazard analysis methods when assessing quality and safety in care pathways that lie across primary and secondary care boundaries. Methods Development of a process map of the care pathway for patients entering into a Chronic Obstructive Pulmonary Disease (COPD supported discharge programme. Triangulation of information from: care process mapping, semi-structured interviews with COPD patients, semi-structured interviews with COPD staff, two round modified Delphi study and review of prioritised quality and safety challenges by health care staff. Results Interview themes emerged under the headings of quality of care and patient safety. Quality and safety concerns were mostly raised in relation to communication, for example, communication with other hospital teams. The three highest ranked safety concerns from the modified Delphi review were: difficulties in accessing hospital records, information transfer to primary care and failure to communicate medication changes to primary care. Conclusion This study has demonstrated the feasibility of using mixed methods to review the quality and safety of care in a care pathway. By using multiple research methods it was possible to get a clear picture of service quality variations and also to demonstrate which points in the care pathway had real potential for patient safety incidents or system failures to occur. By using these methods to analyse one condition specific care pathway it was possible to uncover a number of hospital

  18. Need for an "integrated safety assessment" of GMOs, linking food safety and environmental considerations.

    Science.gov (United States)

    Haslberger, Alexander G

    2006-05-03

    Evidence for substantial environmental influences on health and food safety comes from work with environmental health indicators which show that agroenvironmental practices have direct and indirect effects on human health, concluding that "the quality of the environment influences the quality and safety of foods" [Fennema, O. Environ. Health Perspect. 1990, 86, 229-232). In the field of genetically modified organisms (GMOs), Codex principles have been established for the assessment of GM food safety and the Cartagena Protocol on Biosafety outlines international principles for an environmental assessment of living modified organisms. Both concepts also contain starting points for an assessment of health/food safety effects of GMOs in cases when the environment is involved in the chain of events that could lead to hazards. The environment can act as a route of unintentional entry of GMOs into the food supply, such as in the case of gene flow via pollen or seeds from GM crops, but the environment can also be involved in changes of GMO-induced agricultural practices with relevance for health/food safety. Examples for this include potential regional changes of pesticide uses and reduction in pesticide poisonings resulting from the use of Bt crops or influences on immune responses via cross-reactivity. Clearly, modern methods of biotechnology in breeding are involved in the reasons behind the rapid reduction of local varieties in agrodiversity, which constitute an identified hazard for food safety and food security. The health/food safety assessment of GM foods in cases when the environment is involved needs to be informed by data from environmental assessment. Such data might be especially important for hazard identification and exposure assessment. International organizations working in these areas will very likely be needed to initiate and enable cooperation between those institutions responsible for the different assessments, as well as for exchange and analysis of

  19. The Safety Case and Safety Assessment for the Disposal of Radioactive Waste

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-15

    This Safety Guide provides guidance and recommendations on meeting the safety requirements in respect of the safety case and supporting safety assessment for the disposal of radioactive waste. The safety case and supporting safety assessment provide the basis for demonstration of safety and for licensing of radioactive waste disposal facilities and assist and guide decisions on siting, design and operations. The safety case is also the main basis on which dialogue with interested parties is conducted and on which confidence in the safety of the disposal facility is developed. This Safety Guide is relevant for operating organizations preparing the safety case as well as for the regulatory body responsible for developing the regulations and regulatory guidance that determine the basis and scope of the safety case. Contents: 1. Introduction; 2. Demonstrating the safety of radioactive waste disposal; 3. Safety principles and safety requirements; 4. The safety case for disposal of radioactive waste; 5. Radiological impact assessment for the period after closure; 6. Specific issues; 7. Documentation and use of the safety case; 8. Regulatory review process.

  20. Safety assessment for facilities and activities. General safety requirements. Pt. 4

    International Nuclear Information System (INIS)

    2009-01-01

    The Safety Fundamentals publication, Fundamental Safety Principles, establishes principles for ensuring the protection of workers, the public and the environment, now and in the future, from harmful effects of ionizing radiation. The objective of this Safety Requirements publication is to establish the generally applicable requirements to be fulfilled in safety assessment for facilities and activities, with special attention paid to defence in depth, quantitative analyses and the application of a graded approach to the ranges of facilities and of activities that are addressed. The publication also addresses the independent verification of the safety assessment that needs to be carried out by the originators and users of the safety assessment. This publication is intended to provide a consistent and coherent basis for safety assessment across all facilities and activities, which will facilitate the transfer of good practices between organizations conducting safety assessments and will assist in enhancing the confidence of all interested parties that an adequate level of safety has been achieved for facilities and activities. The requirements, which are derived from the Fundamental Safety Principles, relate to any human activity that may cause people to be exposed to radiation risks arising from facilities and activities, as follows: Facilities includes: (a) Nuclear power plants; (b) Other reactors (such as research reactors and critical assemblies); (c) Enrichment facilities and fuel fabrication facilities; (d) Conversion facilities used to generate UF 6 ; (e) Storage and reprocessing plants for irradiated fuel; (f) Facilities for radioactive waste management where radioactive waste is treated, conditioned, stored or disposed of; (g) Any other places where radioactive materials are produced, processed, used, handled or stored; (h) Irradiation facilities for medical, industrial, research and other purposes, and any places where radiation generators are installed; (i

  1. Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

    International Nuclear Information System (INIS)

    2009-01-01

    The Safety Fundamentals publication, Fundamental Safety Principles, establishes principles for ensuring the protection of workers, the public and the environment, now and in the future, from harmful effects of ionizing radiation. The objective of this Safety Requirements publication is to establish the generally applicable requirements to be fulfilled in safety assessment for facilities and activities, with special attention paid to defence in depth, quantitative analyses and the application of a graded approach to the ranges of facilities and of activities that are addressed. The publication also addresses the independent verification of the safety assessment that needs to be carried out by the originators and users of the safety assessment. This publication is intended to provide a consistent and coherent basis for safety assessment across all facilities and activities, which will facilitate the transfer of good practices between organizations conducting safety assessments and will assist in enhancing the confidence of all interested parties that an adequate level of safety has been achieved for facilities and activities. The requirements, which are derived from the Fundamental Safety Principles, relate to any human activity that may cause people to be exposed to radiation risks arising from facilities and activities, as follows: Facilities includes: (a) Nuclear power plants; (b) Other reactors (such as research reactors and critical assemblies); (c) Enrichment facilities and fuel fabrication facilities; (d) Conversion facilities used to generate UF6; (e) Storage and reprocessing plants for irradiated fuel; (f) Facilities for radioactive waste management where radioactive waste is treated, conditioned, stored or disposed of; (g) Any other places where radioactive materials are produced, processed, used, handled or stored; (h) Irradiation facilities for medical, industrial, research and other purposes, and any places where radiation generators are installed; (i

  2. Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

    International Nuclear Information System (INIS)

    2010-01-01

    The Safety Fundamentals publication, Fundamental Safety Principles, establishes principles for ensuring the protection of workers, the public and the environment, now and in the future, from harmful effects of ionizing radiation. The objective of this Safety Requirements publication is to establish the generally applicable requirements to be fulfilled in safety assessment for facilities and activities, with special attention paid to defence in depth, quantitative analyses and the application of a graded approach to the ranges of facilities and of activities that are addressed. The publication also addresses the independent verification of the safety assessment that needs to be carried out by the originators and users of the safety assessment. This publication is intended to provide a consistent and coherent basis for safety assessment across all facilities and activities, which will facilitate the transfer of good practices between organizations conducting safety assessments and will assist in enhancing the confidence of all interested parties that an adequate level of safety has been achieved for facilities and activities. The requirements, which are derived from the Fundamental Safety Principles, relate to any human activity that may cause people to be exposed to radiation risks arising from facilities and activities, as follows: Facilities includes: (a) Nuclear power plants; (b) Other reactors (such as research reactors and critical assemblies); (c) Enrichment facilities and fuel fabrication facilities; (d) Conversion facilities used to generate UF6; (e) Storage and reprocessing plants for irradiated fuel; (f) Facilities for radioactive waste management where radioactive waste is treated, conditioned, stored or disposed of; (g) Any other places where radioactive materials are produced, processed, used, handled or stored; (h) Irradiation facilities for medical, industrial, research and other purposes, and any places where radiation generators are installed; (i

  3. Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

    International Nuclear Information System (INIS)

    2009-01-01

    The Safety Fundamentals publication, Fundamental Safety Principles, establishes principles for ensuring the protection of workers, the public and the environment, now and in the future, from harmful effects of ionizing radiation.? read more The objective of this Safety Requirements publication is to establish the generally applicable requirements to be fulfilled in safety assessment for facilities and activities, with special attention paid to defence in depth, quantitative analyses and the application of a graded approach to the ranges of facilities and of activities that are addressed. The publication also addresses the independent verification of the safety assessment that needs to be carried out by the originators and users of the safety assessment. This publication is intended to provide a consistent and coherent basis for safety assessment across all facilities and activities, which will facilitate the transfer of good practices between organizations conducting safety assessments and will assist in enhancing the confidence of all interested parties that an adequate level of safety has been achieved for facilities and activities. The requirements, which are derived from the Fundamental Safety Principles, relate to any human activity that may cause people to be exposed to radiation risks arising from facilities and activities, as follows: Facilities includes: (a) Nuclear power plants; (b) Other reactors (such as research reactors and critical assemblies); (c) Enrichment facilities and fuel fabrication facilities; (d) Conversion facilities used to generate UF6; (e) Storage and reprocessing plants for irradiated fuel; (f) Facilities for radioactive waste management where radioactive waste is treated, conditioned, stored or disposed of; (g) Any other places where radioactive materials are produced, processed, used, handled or stored; (h) Irradiation facilities for medical, industrial, research and other purposes, and any places where radiation generators are

  4. Safety Culture Monitoring: How to Assess Safety Culture in Real Time?

    International Nuclear Information System (INIS)

    Zronek, B.; Maryska, J.; Treslova, L.

    2016-01-01

    Do you know what is current level of safety culture in your company? Are you able to follow trend changes? Do you know what your recent issues are? Since safety culture is understood as vital part of nuclear industry daily life, it is crucial to know what the current level is. It is common to perform safety culture survey or ad hoc assessment. This contribution shares Temelin NPP, CEZ approach how to assess safety culture level permanently. Using behavioral related outputs of gap solving system, observation program, dedicated surveys, regulatory assessment, etc., allows creating real time safety culture monitoring without the need to perform any other activities. (author)

  5. Regulatory review of safety cases and safety assessments - associated challenges

    International Nuclear Information System (INIS)

    Bennett, D.G.; Ben Belfadhel, M.; Metcalf, P.E.

    2006-01-01

    Regulatory reviews of safety cases and safety assessments are essential for credible decision making on the licensing or authorization of radioactive waste disposal facilities. Regulatory review also plays an important role in developing the safety case and in establishing stakeholders' confidence in the safety of the facility. Reviews of safety cases for radioactive waste disposal facilities need to be conducted by suitably qualified and experienced staff, following systematic and well planned review processes. Regulatory reviews should be sufficiently comprehensive in their coverage of issues potentially affecting the safety of the disposal system, and should assess the safety case against clearly established criteria. The conclusions drawn from a regulatory review, and the rationale for them should be reproducible and documented in a transparent and traceable way. Many challenges are faced when conducting regulatory reviews of safety cases. Some of these relate to issues of project and programme management, and resources, while others derive from the inherent difficulties of assessing the potential long term future behaviour of engineered and environmental systems. The paper describes approaches to the conduct of regulatory reviews and discusses some of the challenges faced. (author)

  6. New method of safety assessment for pressure vessel of nuclear power plant--brief introduction of master curve approach

    International Nuclear Information System (INIS)

    Yang Wendou

    2011-01-01

    The new Master Curve Method is called as a revolutionary advance to the assessment of- reactor pressure vessel integrity in USA. This paper explains the origin, basis and standard of the Master Curve from the reactor pressure-temperature limit curve which assures the safety of nuclear power plant. According to the characteristics of brittle fracture which is greatly susceptible to the microstructure, the theory and the test method of the Master Curve as well as its statistical law which can be modeled using Weibull distribution are described in this paper. The meaning, advantage, application and importance of the Master Curve as well as the relation between the Master Curve and nuclear power safety are understood from the fitting formula for the fracture toughness database by Weibull distribution model. (author)

  7. Safety assessments for potential exposures

    International Nuclear Information System (INIS)

    Dunn, D.I.

    2012-04-01

    Safety Assessment of potential exposures have been carried out in major practices, namely: industrial radiography, gamma irradiators and electron accelerators used in industry and research, and radiotherapy. This paper focuses on reviewing safety assessment methodologies and using developed software to analyse radiological accidents, also review, and discuss these past accidents.The primary objective of the assessment is to assess the adequacy of planned or existing measures for protection and safety and to identify any additional measures that should be put in place. As such, both routine use of the source and the probability and magnitude of potential exposures arising from accidents or incidents should be considered. Where the assessment indicates that there is a realistic possibility of an accident affecting workers or members of the public or having consequences for the environment, the registrant or licensee should prepare a suitable emergency plan. A safety assessment for normal operation addresses all the conditions under which the radiation source operates as expected, including all phases of the lifetime of the source. Due account needs to be taken of the different factors and conditions that will apply during non-operational phases, such as installation, commissioning and maintenance. (author)

  8. Development of a Safety Assessment Information System for the Management of Periodic Safety Assessment Activities

    International Nuclear Information System (INIS)

    Song, Tae Young

    2007-01-01

    At present, the 10-year Periodic Safety Review(PSR) has been performing to confirm all the aspects of safety issues for all the operating plants in compliance with domestic nuclear law of article 23, subarticle 3. For each plant, in addition, Probabilistic Safety Assessment(PSA) and Severe Accident Management Guideline(SAMG) are being implemented and revised periodically to reflect the latest safety level according to principle fulfillment of severe accident policy statement. The assessment reports, as one of outcomes from these activities, are submitted into and reviewed by domestic regulatory body. During reviewing (in-office duty) and licensing (regulatory duty) process, a large number of outcomes of which most are the formal technical reports and licensing materials, are inevitably produced. Moreover, repeated review process over the plants can make them accumulated and produce a variety of documents additionally. This circumstance motivates to develop effective tool or system for the management of these reports and related technical documents for the future use in licensing process and for subsequent plant assessments. This paper presents the development status of Safety Assessment Information System(SAIS) which manages safety-related documents of PSR, PSA and SAMG for practical use for experienced engineers in charge of these areas

  9. Development of a Safety Assessment Information System for the Management of Periodic Safety Assessment Activities

    Energy Technology Data Exchange (ETDEWEB)

    Song, Tae Young [Nuclear Engineering and Technology Institute, Daejeon (Korea, Republic of)

    2007-07-01

    At present, the 10-year Periodic Safety Review(PSR) has been performing to confirm all the aspects of safety issues for all the operating plants in compliance with domestic nuclear law of article 23, subarticle 3. For each plant, in addition, Probabilistic Safety Assessment(PSA) and Severe Accident Management Guideline(SAMG) are being implemented and revised periodically to reflect the latest safety level according to principle fulfillment of severe accident policy statement. The assessment reports, as one of outcomes from these activities, are submitted into and reviewed by domestic regulatory body. During reviewing (in-office duty) and licensing (regulatory duty) process, a large number of outcomes of which most are the formal technical reports and licensing materials, are inevitably produced. Moreover, repeated review process over the plants can make them accumulated and produce a variety of documents additionally. This circumstance motivates to develop effective tool or system for the management of these reports and related technical documents for the future use in licensing process and for subsequent plant assessments. This paper presents the development status of Safety Assessment Information System(SAIS) which manages safety-related documents of PSR, PSA and SAMG for practical use for experienced engineers in charge of these areas.

  10. Waste Isolation Safety Assessment Program scenario analysis methods for use in assessing the safety of the geologic isolation of nuclear waste

    International Nuclear Information System (INIS)

    Greenborg, J.; Winegardner, W.K.; Pelto, P.J.; Voss, J.W.; Stottlemyre, J.A.; Forbes, I.A.; Fussell, J.B.; Burkholder, H.C.

    1978-11-01

    The relative utility of the various safety analysis methods to scenario analysis for a repository system was evaluated by judging the degree to which certain criteria are satisfied by use of the method. Six safety analysis methods were reviewed in this report for possible use in scenario analysis of nuclear waste repositories: expert opinion, perspectives analysis, fault trees/event trees, Monte Carlo simulation, Markov chains, and classical systems analysis. Four criteria have been selected. The criteria suggest that the methods: (1) be quantitative and scientifically based; (2) model the potential disruptive events and processes, (3) model the system before and after failure (sufficiently detailed to provide for subsequent consequence analysis); and (4) be compatible with the level of available system knowledge and data. Expert opinion, fault trees/event trees, Monte Carlo simulation and classical systems analysis were judged to have the greatest potential appliation to the problem of scenario analysis. The methods were found to be constrained by limited data and by knowledge of the processes governing the system. It was determined that no single method is clearly superior to others when measured against all the criteria. Therefore, to get the best understanding of system behavior, a combination of the methods is recommended. Monte Carlo simulation was judged to be the most suitable matrix in which to incorporate a combination of methods

  11. Self-assessment of safety culture in nuclear installations. Highlights and good practices

    International Nuclear Information System (INIS)

    2002-11-01

    This report summarizes the findings of two IAEA Technical Committee Meetings on Safety Culture Self-Assessment Highlights and Good Practices. The meetings took place on 3-5 June 1998 and 23-25 October 2000 in Vienna, and involved an international cross-section of representatives who participated both in plenary discussions and working groups. The purpose of the meetings was to discuss the practical implications of evolutionary changes in the development of safety culture, and to share international experience, particularly on the methods used for the assessment of safety culture and good practices for its enhancement in an organization. The working groups were allocated specific topics for discussion, which included the following: organizational factors influencing the implementation of actions to improve safety culture; how to measure, effectively, progress in implementing solutions to safety culture problems; the symptoms of a weakening safety culture; the suitability of different methods for assessing safety culture; the achievement of sustainable improvements in safety culture using the results of assessment; the potential threats to the continuation of a strong safety culture in an organization from the many challenges facing the nuclear industry. The working groups, when appropriate, considered issues from both the utility's and the regulator's perspectives. This report will be of interest to all organizations who wish to assess and achieve a strong and sustainable safety culture. This includes not only nuclear power plants, but also other sectors of the nuclear industry such as uranium mines and mills, nuclear fuel fabrication facilities, nuclear waste repositories, research reactors, accelerators, radiography facilities, etc. The report specifically supplements other IAEA publications on this subject

  12. Safety training for working youth: Methods used versus methods wanted.

    Science.gov (United States)

    Zierold, Kristina M

    2016-04-07

    Safety training is promoted as a tool to prevent workplace injury; however, little is known about the safety training experiences young workers get on-the-job. Furthermore, nothing is known about what methods they think would be the most helpful for learning about safe work practices. To compare safety training methods teens get on the job to those safety training methods teens think would be the best for learning workplace safety, focusing on age differences. A cross-sectional survey was administered to students in two large high schools in spring 2011. Seventy percent of working youth received safety training. The top training methods that youth reported getting at work were safety videos (42%), safety lectures (25%), and safety posters/signs (22%). In comparison to the safety training methods used, the top methods youth wanted included videos (54%), hands-on (47%), and on-the-job demonstrations (34%). This study demonstrated that there were differences in training methods that youth wanted by age; with older youth seemingly wanting more independent methods of training and younger teens wanting more involvement. Results indicate that youth want methods of safety training that are different from what they are getting on the job. The differences in methods wanted by age may aid in developing training programs appropriate for the developmental level of working youth.

  13. Seismic safety margin assessment program (Annual safety research report, JFY 2010)

    International Nuclear Information System (INIS)

    Suzuki, Kenichi; Iijima, Toru; Inagaki, Masakatsu; Taoka, Hideto; Hidaka, Shinjiro

    2011-01-01

    Seismic capacity test data, analysis method and evaluation code provided by Seismic Safety Margin Assessment Program have been utilized for the support of seismic back-check evaluation of existing plants. The summary of the program in 2010 is as follows. 1. Component seismic capacity test and quantitative seismic capacity evaluation. Many seismic capacity tests of various snubbers were conducted and quantitative seismic capacities were evaluated. One of the emergency diesel generator partial-model seismic capacity tests was conducted and quantitative seismic capacity was evaluated. Some of the analytical evaluations of piping-system seismic capacities were conducted. 2. Analysis method for minute evaluation of component seismic response. The difference of seismic response of large components such as primary containment vessel and reactor pressure vessel when they were coupled with 3-dimensional FEM building model or 1-dimensional lumped mass building model, was quantitatively evaluated. 3. Evaluation code for quantitative evaluation of seismic safety margin of systems, structures and components. As the example, quantitative evaluation of seismic safety margin of systems, structures and components were conducted for the reference plant. (author)

  14. Method for Pedestrian Crossing Risk Assessment and Safety Level Determination: the Case Study of Tallinn

    Energy Technology Data Exchange (ETDEWEB)

    Pashkevich, M.; Krasilnikova, A.; Antov, D.

    2016-07-01

    Pedestrians are a part of vulnerable road users which safety requires a special attention. Official statistics in Estonia from the last decade returns the following numbers: around 30 % of all road traffic accidents in the country were accidents with pedestrians, 32 % of all traffic fatalities were finished with pedestrian death. Pedestrian crossing has the biggest risk level between all kinds of pedestrian facilities, because it includes a direct conflict point between vehicle and pedestrian traffics. The article presents a method to assess risk of pedestrian crossing users and to determine safety level of this road infrastructure element. This approach is based on observation and collection of infrastructural as well as traffic data, which includes: (1) information about each pedestrian crossing facility, its location and state, (2) data about accidents with pedestrians and their features, (3) data from road traffic measurements. The main advantages of the described method are universality and comprehensiveness. The case study was done in Kristiine district of the city Tallinn, which was chosen as the most typical average district of Estonian capital. Results of this study are also presented in the article. (Author)

  15. Measuring Best Practices for Workplace Safety, Health, and Well-Being: The Workplace Integrated Safety and Health Assessment.

    Science.gov (United States)

    Sorensen, Glorian; Sparer, Emily; Williams, Jessica A R; Gundersen, Daniel; Boden, Leslie I; Dennerlein, Jack T; Hashimoto, Dean; Katz, Jeffrey N; McLellan, Deborah L; Okechukwu, Cassandra A; Pronk, Nicolaas P; Revette, Anna; Wagner, Gregory R

    2018-05-01

    To present a measure of effective workplace organizational policies, programs, and practices that focuses on working conditions and organizational facilitators of worker safety, health and well-being: the workplace integrated safety and health (WISH) assessment. Development of this assessment used an iterative process involving a modified Delphi method, extensive literature reviews, and systematic cognitive testing. The assessment measures six core constructs identified as central to best practices for protecting and promoting worker safety, health and well-being: leadership commitment; participation; policies, programs, and practices that foster supportive working conditions; comprehensive and collaborative strategies; adherence to federal and state regulations and ethical norms; and data-driven change. The WISH Assessment holds promise as a tool that may inform organizational priority setting and guide research around causal pathways influencing implementation and outcomes related to these approaches.

  16. Safety assessment of genetically modified crops

    International Nuclear Information System (INIS)

    Atherton, Keith T.

    2002-01-01

    The development of genetically modified (GM) crops has prompted widespread debate regarding both human safety and environmental issues. Food crops produced by modern biotechnology using recombinant techniques usually differ from their conventional counterparts only in respect of one or a few desirable genes, as opposed to the use of traditional breeding methods which mix thousands of genes and require considerable efforts to select acceptable and robust hybrid offspring. The difficulties of applying traditional toxicological testing and risk assessment procedures to whole foods are discussed along with the evaluation strategies that are used for these new food products to ensure the safety of these products for the consumer

  17. A 2-year study of patient safety competency assessment in 29 clinical laboratories.

    Science.gov (United States)

    Reed, Robyn C; Kim, Sara; Farquharson, Kara; Astion, Michael L

    2008-06-01

    Competency assessment is critical for laboratory operations and is mandated by the Clinical Laboratory Improvement Amendments of 1988. However, no previous reports describe methods for assessing competency in patient safety. We developed and implemented a Web-based tool to assess performance of 875 laboratory staff from 29 laboratories in patient safety. Question categories included workplace culture, categorizing error, prioritization of patient safety interventions, strength of specific interventions, and general patient safety concepts. The mean score was 85.0%, with individual scores ranging from 56% to 100% and scores by category from 81.3% to 88.6%. Of the most difficult questions (laboratory technologists. Computer-based competency assessments help laboratories identify topics for continuing education in patient safety.

  18. Consideration of aging in probabilistic safety assessment

    International Nuclear Information System (INIS)

    Titina, B.; Cepin, M.

    2007-01-01

    Probabilistic safety assessment is a standardised tool for assessment of safety of nuclear power plants. It is a complement to the safety analyses. Standard probabilistic models of safety equipment assume component failure rate as a constant. Ageing of systems, structures and components can theoretically be included in new age-dependent probabilistic safety assessment, which generally causes the failure rate to be a function of age. New age-dependent probabilistic safety assessment models, which offer explicit calculation of the ageing effects, are developed. Several groups of components are considered which require their unique models: e.g. operating components e.g. stand-by components. The developed models on the component level are inserted into the models of the probabilistic safety assessment in order that the ageing effects are evaluated for complete systems. The preliminary results show that the lack of necessary data for consideration of ageing causes highly uncertain models and consequently the results. (author)

  19. A Methodology for Safety Culture Impact Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of)

    2014-05-15

    The purpose of this study is to develop methodology for assessing safety culture impact on nuclear power plants. A new methodology for assessing safety culture impact index has been developed and applied for the reference nuclear power plants. The developed SCII model might contribute to comparing the level of safety culture among nuclear power plants as well as to improving the safety of nuclear power plants. Safety culture is defined to be fundamental attitudes and behaviors of the plant staff which demonstrate that nuclear safety is the most important consideration in all activities conducted in nuclear power operation. Through several accidents of nuclear power plant including the Fukusima Daiichi in 2011 and Chernovyl accidents in 1986, the safety of nuclear power plant is emerging into a matter of interest. From the accident review report, it can be easily found out that safety culture is important and one of dominant contributors to accidents. However, the impact methodology for assessing safety culture has not been established analytically yet. It is difficult to develop the methodology for assessing safety culture impact quantitatively.

  20. A Methodology for Safety Culture Impact Assessment

    International Nuclear Information System (INIS)

    Han, Kiyoon; Jae, Moosung

    2014-01-01

    The purpose of this study is to develop methodology for assessing safety culture impact on nuclear power plants. A new methodology for assessing safety culture impact index has been developed and applied for the reference nuclear power plants. The developed SCII model might contribute to comparing the level of safety culture among nuclear power plants as well as to improving the safety of nuclear power plants. Safety culture is defined to be fundamental attitudes and behaviors of the plant staff which demonstrate that nuclear safety is the most important consideration in all activities conducted in nuclear power operation. Through several accidents of nuclear power plant including the Fukusima Daiichi in 2011 and Chernovyl accidents in 1986, the safety of nuclear power plant is emerging into a matter of interest. From the accident review report, it can be easily found out that safety culture is important and one of dominant contributors to accidents. However, the impact methodology for assessing safety culture has not been established analytically yet. It is difficult to develop the methodology for assessing safety culture impact quantitatively

  1. OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT WITH THE USE OF BRAINSTORMING METHOD

    Directory of Open Access Journals (Sweden)

    Artur Woźny

    2018-01-01

    Full Text Available Health and safety at work issue concerns every employer. Adjusting the work environment to legal requirements and standards is the key to creating health and safety culture. In every functioning OSH system there are various types of problems that employers face. The subject of the article is how to solve the problem of safety in production systems using the brainstorming method. The basic ele-ment of creating health and safety culture is an appropriate approach to occupational risk manage-ment. Risk assessment in the workplace should take place in teams as it is possible to reliably identi-fy hazards and accurately assess them.

  2. Building quality into performance and safety assessment software

    International Nuclear Information System (INIS)

    Wojciechowski, L.C.

    2011-01-01

    Quality assurance is integrated throughout the development lifecycle for performance and safety assessment software. The software used in the performance and safety assessment of a Canadian deep geological repository (DGR) follows the CSA quality assurance standard CSA-N286.7 [1], Quality Assurance of Analytical, Scientific and Design Computer Programs for Nuclear Power Plants. Quality assurance activities in this standard include tasks such as verification and inspection; however, much more is involved in producing a quality software computer program. The types of errors found with different verification methods are described. The integrated quality process ensures that defects are found and corrected as early as possible. (author)

  3. Risk-informed approaches to assess ecological safety of facilities with radioactive waste

    International Nuclear Information System (INIS)

    Vashchenko, V.N.; Zlochevskij, V.V.; Skalozubov, V.I.

    2011-01-01

    Ingenious risk-informed methods to assess ecological safety of facilities with radioactive waste are proposed in the paper. Probabilistic norms on lethal outcomes and reliability of safety barriers are used as safety criteria. Based on the probability measures, it is established that ecological safety conditions are met for the standard criterion of lethal outcomes

  4. Regulatory review of safety cases and safety assessments for near surface

    International Nuclear Information System (INIS)

    Nys, V.

    2003-01-01

    The activities of the ASAM Regulatory Review Working Group are presented. Regulatory review of the safety assessment is made. It includes the regulatory review of post-closure safety assessment; safety case development and confidence building. The ISAM methodology is reviewed and SA system description is presented. Recommendations on the review process management are given

  5. Safety Auditing and Assessments

    Science.gov (United States)

    Goodin, James Ronald (Ronnie)

    2005-01-01

    Safety professionals typically do not engage in audits and independent assessments with the vigor as do our quality brethren. Taking advantage of industry and government experience conducting value added Independent Assessments or Audits benefits a safety program. Most other organizations simply call this process "internal audits." Sources of audit training are presented and compared. A relation of logic between audit techniques and mishap investigation is discussed. An example of an audit process is offered. Shortcomings and pitfalls of auditing are covered.

  6. Confidence building in safety assessments

    International Nuclear Information System (INIS)

    Grundfelt, Bertil

    1999-01-01

    Future generations should be adequately protected from damage caused by the present disposal of radioactive waste. This presentation discusses the core of safety and performance assessment: The demonstration and building of confidence that the disposal system meets the safety requirements stipulated by society. The major difficulty is to deal with risks in the very long time perspective of the thousands of years during which the waste is hazardous. Concern about these problems has stimulated the development of the safety assessment discipline. The presentation concentrates on two of the elements of safety assessment: (1) Uncertainty and sensitivity analysis, and (2) validation and review. Uncertainty is associated both with respect to what is the proper conceptual model and with respect to parameter values for a given model. A special kind of uncertainty derives from the variation of a property in space. Geostatistics is one approach to handling spatial variability. The simplest way of doing a sensitivity analysis is to offset the model parameters one by one and observe how the model output changes. The validity of the models and data used to make predictions is central to the credibility of safety assessments for radioactive waste repositories. There are several definitions of model validation. The presentation discusses it as a process and highlights some aspects of validation methodologies

  7. Probabilistic safety assessment model in consideration of human factors based on object-oriented bayesian networks

    International Nuclear Information System (INIS)

    Zhou Zhongbao; Zhou Jinglun; Sun Quan

    2007-01-01

    Effect of Human factors on system safety is increasingly serious, which is often ignored in traditional probabilistic safety assessment methods however. A new probabilistic safety assessment model based on object-oriented Bayesian networks is proposed in this paper. Human factors are integrated into the existed event sequence diagrams. Then the classes of the object-oriented Bayesian networks are constructed which are converted to latent Bayesian networks for inference. Finally, the inference results are integrated into event sequence diagrams for probabilistic safety assessment. The new method is applied to the accident of loss of coolant in a nuclear power plant. the results show that the model is not only applicable to real-time situation assessment, but also applicable to situation assessment based certain amount of information. The modeling complexity is kept down and the new method is appropriate to large complex systems due to the thoughts of object-oriented. (authors)

  8. Safety analysis, risk assessment, and risk acceptance criteria

    International Nuclear Information System (INIS)

    Jamali, K.

    1997-01-01

    This paper discusses a number of topics that relate safety analysis as documented in the Department of Energy (DOE) safety analysis reports (SARs), probabilistic risk assessments (PRA) as characterized primarily in the context of the techniques that have assumed some level of formality in commercial nuclear power plant applications, and risk acceptance criteria as an outgrowth of PRA applications. DOE SARs of interest are those that are prepared for DOE facilities under DOE Order 5480.23 and the implementing guidance in DOE STD-3009-94. It must be noted that the primary area of application for DOE STD-3009 is existing DOE facilities and that certain modifications of the STD-3009 approach are necessary in SARs for new facilities. Moreover, it is the hazard analysis (HA) and accident analysis (AA) portions of these SARs that are relevant to the present discussions. Although PRAs can be qualitative in nature, PRA as used in this paper refers more generally to all quantitative risk assessments and their underlying methods. HA as used in this paper refers more generally to all qualitative risk assessments and their underlying methods that have been in use in hazardous facilities other than nuclear power plants. This discussion includes both quantitative and qualitative risk assessment methods. PRA has been used, improved, developed, and refined since the Reactor Safety Study (WASH-1400) was published in 1975 by the Nuclear Regulatory Commission (NRC). Much debate has ensued since WASH-1400 on exactly what the role of PRA should be in plant design, reactor licensing, 'ensuring' plant and process safety, and a large number of other decisions that must be made for potentially hazardous activities. Of particular interest in this area is whether the risks quantified using PRA should be compared with numerical risk acceptance criteria (RACs) to determine whether a facility is 'safe.' Use of RACs requires quantitative estimates of consequence frequency and magnitude

  9. Procedures for conducting probabilistic safety assessment for non-reactor nuclear facilities

    International Nuclear Information System (INIS)

    2002-01-01

    A well performed and adequately documented safety assessment of a nuclear facility will serve as a basis to determine whether the facility complies with the safety objectives, principles and criteria as stipulated by the national regulatory body of the country where the facility is in operation. International experience shows that the practices and methodologies used to perform safety assessments and periodic safety re-assessment for non-reactor nuclear facilities differ significantly from county to country. Most developing countries do not have methods and guidance for safety assessment that are prescribed by the regulatory body. Typically the safety evaluation for the facility is based on a case by case assessment. Whilst conservative deterministic analyses are predominantly used as a licensing basis in many countries, recently probabilistic safety assessment (PSA) techniques have been applied as a useful complementary tool to support safety decision making. The main benefit of PSA is to provide insights into the safety aspects of facility design and operation. PSA points up the potential environmental impacts of postulated accidents, including the dominant risk contributors, and enables safety analysts to compare options for reducing risk. In order to advise on how to apply PSA methodology for the safety assessment of non-reactor nuclear facilities, the IAEA organized several consultants meetings, which led to the preparation of this TECDOC. This document is intended as guidance for the conduct of PSA in non-nuclear facilities. The main emphasis here is on the general procedural steps of a PSA that is specific for a non-reactor nuclear facility, rather than the details of the specific methods. The report is directed at technical staff managing or performing such probabilistic assessments and to promote a standardized framework, terminology and form of documentation for these PSAs. It is understood that the level of detail implied in the tasks presented in this

  10. Audit of data and code use in the SR-Can safety assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hicks, T.W.; Baldwin, T.D. [Galson Sciences Ltd, 5 Grosvenor House, Melton R oad, Oakham, Rutland LE15 6AX (United Kingdom)

    2008-03-15

    assessment should be obtained from controlled sources or suitable external references such as textbooks or peer-reviewed journals. Information should be provided on how data are managed and controlled such that the data are selected and used appropriately in safety assessment calculations. Procedures for ensuring that controlled and quality assured data and parameter values are obtained for use in the safety assessment should be explained. - Comprehensive references to controlled data sources and documentation on data abstraction to derive parameter values for all data sets should be included in the Data Report. The Data Report should become the primary reference for data and parameter values used in the safety assessment to build confidence that data and parameter values are used consistently and traceable throughout the safety assessment. - Information on the review criteria or procedures used by SKB to determine whether a particular data set is acceptable for use in the safety assessment should be provided. Procedures for accepting data for use in the safety assessment should include a check that the data qualification process has been documented, and confirmation that data were acquired under appropriate quality assurance procedures or that suitable data qualification methods have been applied (such as confirmation testing, peer review, or independent technical assessment). - To build confidence in SKB's process of review and approval of safety assessment reports, information should be provided on the method of selection of reviewers, the review criteria, the process of comment resolution, and the availability of review records. - The role of each code used in the safety assessment should be explained in the Model Summary Report, with cross-references to where associated features, events, and processes, input data, and code applications are presented, and to where results are used in the safety assessment documentation, possibly through greater use of the Assessment

  11. Analysis on evaluation ability of nonlinear safety assessment model of coal mines based on artificial neural network

    Institute of Scientific and Technical Information of China (English)

    SHI Shi-liang; LIU Hai-bo; LIU Ai-hua

    2004-01-01

    Based on the integration analysis of goods and shortcomings of various methods used in safety assessment of coal mines, combining nonlinear feature of mine safety sub-system, this paper establishes the neural network assessment model of mine safety, analyzes the ability of artificial neural network to evaluate mine safety state, and lays the theoretical foundation of artificial neural network using in the systematic optimization of mine safety assessment and getting reasonable accurate safety assessment result.

  12. Development of probabilistic methods for safety assessment of nuclear power plants

    International Nuclear Information System (INIS)

    Schott, H.; Berg, H.P.

    1998-01-01

    Since its introduction by the German Risk Study, Probabilistic Safety Assessment (PSA) has developed in Germany to a valuable tool in regulatory decision-making. Plant specific PSAs of Level 1+ are now conducted for all nuclear power plants in the frame of Periodic Safety Reviews. This paper is devoted to the description or key elements set out in the regulatory guidelines for PSA-Level 1+ and the corresponding technical documents and the further development of PSA methodology in the Federal Republic of Germany. In the course of the next years it is intended to make progress in the modeling of common cause failures, human reliability evaluation, reduction of uncertainties in PSA modeling techniques and data estimation, analysis of low power and shut down states as well as in reaching a mature methodology for inclusion of external events into the analysis. (author)

  13. Determination of Safety Performance Grade of NPP Using Integrated Safety Performance Assessment (ISPA) Program

    International Nuclear Information System (INIS)

    Chung, Dae Wook

    2011-01-01

    Since the beginning of 2000, the safety regulation of nuclear power plant (NPP) has been challenged to be conducted more reasonable, effective and efficient way using risk and performance information. In the United States, USNRC established Reactor Oversight Process (ROP) in 2000 for improving the effectiveness of safety regulation of operating NPPs. The main idea of ROP is to classify the NPPs into 5 categories based on the results of safety performance assessment and to conduct graded regulatory programs according to categorization, which might be interpreted as 'Graded Regulation'. However, the classification of safety performance categories is highly comprehensive and sensitive process so that safety performance assessment program should be prepared in integrated, objective and quantitative manner. Furthermore, the results of assessment should characterize and categorize the actual level of safety performance of specific NPP, integrating all the substantial elements for assessing the safety performance. In consideration of particular regulatory environment in Korea, the integrated safety performance assessment (ISPA) program is being under development for the use in the determination of safety performance grade (SPG) of a NPP. The ISPA program consists of 6 individual assessment programs (4 quantitative and 2 qualitative) which cover the overall safety performance of NPP. Some of the assessment programs which are already implemented are used directly or modified for incorporating risk aspects. The others which are not existing regulatory programs are newly developed. Eventually, all the assessment results from individual assessment programs are produced and integrated to determine the safety performance grade of a specific NPP

  14. Application of the Integrated Safety Assessment methodology to safety margins. Dynamic Event Trees, Damage Domains and Risk Assessment

    International Nuclear Information System (INIS)

    Ibánez, L.; Hortal, J.; Queral, C.; Gómez-Magán, J.; Sánchez-Perea, M.; Fernández, I.; Meléndez, E.; Expósito, A.; Izquierdo, J.M.; Gil, J.; Marrao, H.; Villalba-Jabonero, E.

    2016-01-01

    The Integrated Safety Assessment (ISA) methodology, developed by the Consejo de Seguridad Nuclear, has been applied to an analysis of Zion NPP for sequences with Loss of the Component Cooling Water System (CCWS). The ISA methodology proposal starts from the unfolding of the Dynamic Event Tree (DET). Results from this first step allow assessing the sequence delineation of standard Probabilistic Safety Analysis results. For some sequences of interest of the outlined DET, ISA then identifies the Damage Domain (DD). This is the region of uncertain times and/or parameters where a safety limit is exceeded, which indicates the occurrence of certain damage situation. This paper illustrates application of this concept obtained simulating sequences with MAAP and with TRACE. From information of simulation results of sequence transients belonging to the DD and the time-density probability distributions of the manual actions and of occurrence of stochastic phenomena, ISA integrates the dynamic reliability equations proposed to obtain the sequence contribution to the global Damage Exceedance Frequency (DEF). Reported results show a slight increase in the DEF for sequences investigated following a power uprate from 100% to 110%. This demonstrates the potential use of the method to help in the assessment of design modifications. - Highlights: • This paper illustrates an application of the ISA methodology to safety margins. • Dynamic Event Trees are useful tool for verifying the standard PSA Event Trees. • The ISA methodology takes into account the uncertainties in human action times. • The ISA methodology shows the Damage Exceedance Frequency increase in power uprates.

  15. SKI's and SSI's joint review of SKB's safety assessment report, SR 97. Summary

    International Nuclear Information System (INIS)

    2001-01-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) has a programme for the siting of a repository for spent nuclear fuel in Swedish bedrock. In 1996, the Swedish Government decided that SKB must perform an assessment of the repository's long-term safety before undertaking the next step of the programme which entails drilling in a minimum of two municipalities (site investigations). SKB has presented such a safety assessment in SR 97 Post-closure Safety (henceforth referred to as SR 97). SR 97 is one of the documents in the comprehensive reporting that SKB must provide when it proposes sites for investigation. The Swedish Nuclear Power Inspectorate (SKI) and the Swedish Radiation Protection Institute (SSI) have evaluated SR 97 in terms of its purposes which are to demonstrate a methodology for safety assessment, to show that Swedish bedrock can provide a safe repository using SKB's method, to provide a basis for specifying the factors that are important for site selection and to derive preliminary requirements on the function of the engineered barriers. The authorities have reached the following conclusions: SR 97 does not indicate any conditions that would mean that geological final disposal in accordance with SKB's method would have significant deficiencies in relation to the safety and radiation protection requirements of the authorities. SR 97 contains the elements required for a comprehensive assessment of safety and radiation protection. SKB's safety assessment methodology has improved within several important areas, such as the documentation of processes and properties that can affect repository performance and the development of models for safety assessment calculations. The methodology used in SR 97 has some deficiencies, for example, the specification of future events to be described in the safety assessment. SR 97 has not, to an adequate extent, dealt with unfavourable conditions that can affect the future safety of a repository. SKB states that the

  16. Safety assessment of botanicals and botanical preparations used as ingredients in food supplements: testing an European Food Safety Authority-tiered approach.

    Science.gov (United States)

    Speijers, Gerrit; Bottex, Bernard; Dusemund, Birgit; Lugasi, Andrea; Tóth, Jaroslav; Amberg-Müller, Judith; Galli, Corrado L; Silano, Vittorio; Rietjens, Ivonne M C M

    2010-02-01

    This article describes results obtained by testing the European Food Safety Authority-tiered guidance approach for safety assessment of botanicals and botanical preparations intended for use in food supplements. Main conclusions emerging are as follows. (i) Botanical ingredients must be identified by their scientific (binomial) name, in most cases down to the subspecies level or lower. (ii) Adequate characterization and description of the botanical parts and preparation methodology used is needed. Safety of a botanical ingredient cannot be assumed only relying on the long-term safe use of other preparations of the same botanical. (iii) Because of possible adulterations, misclassifications, replacements or falsifications, and restorations, establishment of adequate quality control is necessary. (iv) The strength of the evidence underlying concerns over a botanical ingredient should be included in the safety assessment. (v) The matrix effect should be taken into account in the safety assessment on a case-by-case basis. (vi) Adequate data and methods for appropriate exposure assessment are often missing. (vii) Safety regulations concerning toxic contaminants have to be complied with. The application of the guidance approach can result in the conclusion that safety can be presumed, that the botanical ingredient is of safety concern, or that further data are needed to assess safety.

  17. The role of probabilistic safety assessment and probabilistic safety criteria in nuclear power plant safety

    International Nuclear Information System (INIS)

    1992-01-01

    The purpose of this Safety Report is to provide guidelines on the role of probabilistic safety assessment (PSA) and a range of associated reference points, collectively referred to as probabilistic safety criteria (PSC), in nuclear safety. The application of this Safety Report and the supporting Safety Practice publication should help to ensure that PSA methodology is used appropriately to assess and enhance the safety of nuclear power plants. The guidelines are intended for use by nuclear power plant designers, operators and regulators. While these guidelines have been prepared with nuclear power plants in mind, the principles involved have wide application to other nuclear and non-nuclear facilities. In Section 2 of this Safety Report guidelines are established on the role PSA can play as part of an overall safety assurance programme. Section 3 summarizes guidelines for the conduct of PSAs, and in Section 4 a PSC framework is recommended and guidance is provided for the establishment of PSC values

  18. Edible safety requirements and assessment standards for agricultural genetically modified organisms.

    Science.gov (United States)

    Deng, Pingjian; Zhou, Xiangyang; Zhou, Peng; Du, Zhong; Hou, Hongli; Yang, Dongyan; Tan, Jianjun; Wu, Xiaojin; Zhang, Jinzhou; Yang, Yongcun; Liu, Jin; Liu, Guihua; Li, Yonghong; Liu, Jianjun; Yu, Lei; Fang, Shisong; Yang, Xiaoke

    2008-05-01

    This paper describes the background, principles, concepts and methods of framing the technical regulation for edible safety requirement and assessment of agricultural genetically modified organisms (agri-GMOs) for Shenzhen Special Economic Zone in the People's Republic of China. It provides a set of systematic criteria for edible safety requirements and the assessment process for agri-GMOs. First, focusing on the degree of risk and impact of different agri-GMOs, we developed hazard grades for toxicity, allergenicity, anti-nutrition effects, and unintended effects and standards for the impact type of genetic manipulation. Second, for assessing edible safety, we developed indexes and standards for different hazard grades of recipient organisms, for the influence of types of genetic manipulation and hazard grades of agri-GMOs. To evaluate the applicability of these criteria and their congruency with other safety assessment systems for GMOs applied by related organizations all over the world, we selected some agri-GMOs (soybean, maize, potato, capsicum and yeast) as cases to put through our new assessment system, and compared our results with the previous assessments. It turned out that the result of each of the cases was congruent with the original assessment.

  19. Probabilistic assessment of nuclear safety and safeguards

    International Nuclear Information System (INIS)

    Higson, D.J.

    1987-01-01

    Nuclear reactor accidents and diversions of materials from the nuclear fuel cycle are perceived by many people as particularly serious threats to society. Probabilistic assessment is a rational approach to the evaluation of both threats, and may provide a basis for decisions on appropriate actions to control them. Probabilistic method have become standard tools used in the analysis of safety, but there are disagreements on the criteria to be applied when assessing the results of analysis. Probabilistic analysis and assessment of the effectiveness of nuclear material safeguards are still at an early stage of development. (author)

  20. Reactor Safety Assessment System

    International Nuclear Information System (INIS)

    Sebo, D.E.; Bray, M.A.; King, M.A.

    1987-01-01

    The Reactor Safety Assessment System (RSAS) is an expert system under development for the United States Nuclear Regulatory Commission (USNRC). RSAS is designed for use at the USNRC Operations Center in the event of a serious incident at a licensed nuclear power plant. RSAS is a situation assessment expert system which uses plant parametric data to generate conclusions for use by the NRC Reactor Safety Team. RSAS uses multiple rule bases and plant specific setpoint files to be applicable to all licensed nuclear power plants in the United States. RSAS currently covers several generic reactor categories and multiple plants within each category

  1. Reactor safety assessment system

    International Nuclear Information System (INIS)

    Sebo, D.E.; Bray, M.A.; King, M.A.

    1987-01-01

    The Reactor Safety Assessment System (RSAS) is an expert system under development for the United States Nuclear Regulatory Commission (USNRC). RSA is designed for use at the USNRC Operations Center in the event of a serious incident at a licensed nuclear power plant. RSAS is a situation assessment expert system which uses plant parametric data to generate conclusions for use by the NRC Reactor Safety Team. RSAS uses multiple rule bases and plant specific setpoint files to be applicable to all licensed nuclear power plants in the United States. RSAS currently covers several generic reactor categories and multiple plants within each category

  2. Independent assessment for new nuclear reactor safety

    Directory of Open Access Journals (Sweden)

    D'Auria Francesco

    2017-01-01

    Full Text Available A rigorous framework for safety assessment is established in all countries where nuclear technology is used for the production of electricity. On the one side, industry, i.e. reactor designers, vendors and utilities perform safety analysis and demonstrate consistency between results of safety analyses and requirements. On the other side, regulatory authorities perform independent assessment of safety and confirm the acceptability of safety of individual reactor units. The process of comparing results from analyses by reactor utilities and regulators is very complex. The process is also highly dependent upon mandatory approaches pursued for the analysis and from very many details which required the knowledge of sensitive proprietary data (e.g. spacer designs. Furthermore, all data available for the design, construction and operation of reactors produced by the nuclear industry are available to regulators. Two areas for improving the process of safety assessment for individual Nuclear Power Plant Units are identified: New details introduced by industry are not always and systematically requested by regulators for the independent assessment; New analytical techniques and capabilities are not necessarily used in the analyses by regulators (and by the industry. The established concept of independent assessment constitutes the way for improving the process of safety assessment. This is possible, or is largely facilitated, by the recent availability of the so-called Best Estimate Plus Uncertainty approach.

  3. Independent assessment for new nuclear reactor safety

    International Nuclear Information System (INIS)

    D'Auria, F.; Glaeser, H.; Debrecin, N.

    2017-01-01

    A rigorous framework for safety assessment is established in all countries where nuclear technology is used for the production of electricity. On one side, industry, i.e. reactor designers, vendors and utilities perform safety analysis and demonstrate consistency between results of safety analyses and requirements. On the other side, regulatory authorities perform independent assessment of safety and confirm the acceptability of safety of individual reactor units. The process of comparing results from analyses by reactor utilities and regulators is very complex. The process is also highly dependent upon mandatory approaches pursued for the analysis and from very many details which required the knowledge of sensitive proprietary data (e.g. spacer designs). Furthermore, all data available for the design, construction and operation of reactors produced by the nuclear industry are available to regulators. Two areas for improving the process of safety assessment for individual Nuclear Power Plant Units are identified: New details introduced by industry are not always and systematically requested by regulators for the independent assessment; New analytical techniques and capabilities are not necessarily used in the analyses by regulators (and by the industry). The established concept of independent assessment constitutes the way for improving the process of safety assessment. This is possible, or is largely facilitated, by the recent availability of the so-called Best Estimate Plus Uncertainty (BEPU) approach. (authors)

  4. Validation of calculational methods for nuclear criticality safety - approved 1975

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The American National Standard for Nuclear Criticality Safety in Operations with Fissionable Materials Outside Reactors, N16.1-1975, states in 4.2.5: In the absence of directly applicable experimental measurements, the limits may be derived from calculations made by a method shown to be valid by comparison with experimental data, provided sufficient allowances are made for uncertainties in the data and in the calculations. There are many methods of calculation which vary widely in basis and form. Each has its place in the broad spectrum of problems encountered in the nuclear criticality safety field; however, the general procedure to be followed in establishing validity is common to all. The standard states the requirements for establishing the validity and area(s) of applicability of any calculational method used in assessing nuclear criticality safety

  5. A Microbial Assessment Scheme to measure microbial performance of Food Safety Management Systems.

    Science.gov (United States)

    Jacxsens, L; Kussaga, J; Luning, P A; Van der Spiegel, M; Devlieghere, F; Uyttendaele, M

    2009-08-31

    A Food Safety Management System (FSMS) implemented in a food processing industry is based on Good Hygienic Practices (GHP), Hazard Analysis Critical Control Point (HACCP) principles and should address both food safety control and assurance activities in order to guarantee food safety. One of the most emerging challenges is to assess the performance of a present FSMS. The objective of this work is to explain the development of a Microbial Assessment Scheme (MAS) as a tool for a systematic analysis of microbial counts in order to assess the current microbial performance of an implemented FSMS. It is assumed that low numbers of microorganisms and small variations in microbial counts indicate an effective FSMS. The MAS is a procedure that defines the identification of critical sampling locations, the selection of microbiological parameters, the assessment of sampling frequency, the selection of sampling method and method of analysis, and finally data processing and interpretation. Based on the MAS assessment, microbial safety level profiles can be derived, indicating which microorganisms and to what extent they contribute to food safety for a specific food processing company. The MAS concept is illustrated with a case study in the pork processing industry, where ready-to-eat meat products are produced (cured, cooked ham and cured, dried bacon).

  6. A proactive method for safety management in nuclear facilities

    International Nuclear Information System (INIS)

    Grecco, Claudio Henrique dos Santos; Carvalho, Paulo Victor Rodrigues de; Santos, Isaac Antonio Luquetti dos

    2014-01-01

    Due to the modern approach to address the safety of nuclear facilities which highlights that these organizations must be able to assess and proactively manage their activities becomes increasingly important the need for instruments to evaluate working conditions. In this context, this work presents a proactive method of managing organizational safety, which has three innovative features: 1) the use of predictive indicators that provide current information on the performance of activities, allowing preventive actions and not just reactive in safety management, different from safety indicators traditionally used (reactive indicators) that are obtained after the occurrence of undesired events; 2) the adoption of resilience engineering approach in the development of indicators - indicators are based on six principles of resilience engineering: top management commitment, learning, flexibility, awareness, culture of justice and preparation for the problems; 3) the adoption of the concepts and properties of fuzzy set theory to deal with subjectivity and consistency of human trials in the evaluation of the indicators. The fuzzy theory is used primarily to map qualitative models of decision-making, and inaccurate representation methods. The results of this study aim an improvement in performance and safety in organizations. The method was applied in a radiopharmaceutical shipping sector of a nuclear facility. The results showed that the method is a good monitoring tool objectively and proactively of the working conditions of an organizational domain

  7. Framework for Continuous Assessment and Improvement of Occupational Health and Safety Issues in Construction Companies

    OpenAIRE

    Mahmoudi, Shahram; Ghasemi, Fakhradin; Mohammadfam, Iraj; Soleimani, Esmaeil

    2014-01-01

    Background: Construction industry is among the most hazardous industries, and needs a comprehensive and simple-to-administer tool to continuously assess and promote its health and safety performance. Methods: Through the study of various standard systems (mainly Health, Safety, and Environment Management System; Occupational Health and Safety Assessment Series 180001; and British Standard, occupational health and safety management systems-Guide 8800), seven main elements were determined fo...

  8. Validity of instruments to assess students' travel and pedestrian safety

    Directory of Open Access Journals (Sweden)

    Baranowski Tom

    2010-05-01

    Full Text Available Abstract Background Safe Routes to School (SRTS programs are designed to make walking and bicycling to school safe and accessible for children. Despite their growing popularity, few validated measures exist for assessing important outcomes such as type of student transport or pedestrian safety behaviors. This research validated the SRTS school travel survey and a pedestrian safety behavior checklist. Methods Fourth grade students completed a brief written survey on how they got to school that day with set responses. Test-retest reliability was obtained 3-4 hours apart. Convergent validity of the SRTS travel survey was assessed by comparison to parents' report. For the measure of pedestrian safety behavior, 10 research assistants observed 29 students at a school intersection for completion of 8 selected pedestrian safety behaviors. Reliability was determined in two ways: correlations between the research assistants' ratings to that of the Principal Investigator (PI and intraclass correlations (ICC across research assistant ratings. Results The SRTS travel survey had high test-retest reliability (κ = 0.97, n = 96, p Conclusions These validated instruments can be used to assess SRTS programs. The pedestrian safety behavior checklist may benefit from further formative work.

  9. Chemical Safety Assessment Using Read-Across: Assessing the Use of Novel Testing Methods to Strengthen the Evidence Base for Decision Making

    Science.gov (United States)

    Amcoff, Patric; Benigni, Romualdo; Blackburn, Karen; Carney, Edward; Cronin, Mark; Deluyker, Hubert; Gautier, Francoise; Judson, Richard S.; Kass, Georges E.N.; Keller, Detlef; Knight, Derek; Lilienblum, Werner; Mahony, Catherine; Rusyn, Ivan; Schultz, Terry; Schwarz, Michael; Schüürmann, Gerrit; White, Andrew; Burton, Julien; Lostia, Alfonso M.; Munn, Sharon; Worth, Andrew

    2015-01-01

    Background Safety assessment for repeated dose toxicity is one of the largest challenges in the process to replace animal testing. This is also one of the proof of concept ambitions of SEURAT-1, the largest ever European Union research initiative on alternative testing, co-funded by the European Commission and Cosmetics Europe. This review is based on the discussion and outcome of a workshop organized on initiative of the SEURAT-1 consortium joined by a group of international experts with complementary knowledge to further develop traditional read-across and include new approach data. Objectives The aim of the suggested strategy for chemical read-across is to show how a traditional read-across based on structural similarities between source and target substance can be strengthened with additional evidence from new approach data—for example, information from in vitro molecular screening, “-omics” assays and computational models—to reach regulatory acceptance. Methods We identified four read-across scenarios that cover typical human health assessment situations. For each such decision context, we suggested several chemical groups as examples to prove when read-across between group members is possible, considering both chemical and biological similarities. Conclusions We agreed to carry out the complete read-across exercise for at least one chemical category per read-across scenario in the context of SEURAT-1, and the results of this exercise will be completed and presented by the end of the research initiative in December 2015. Citation Berggren E, Amcoff P, Benigni R, Blackburn K, Carney E, Cronin M, Deluyker H, Gautier F, Judson RS, Kass GE, Keller D, Knight D, Lilienblum W, Mahony C, Rusyn I, Schultz T, Schwarz M, Schüürmann G, White A, Burton J, Lostia AM, Munn S, Worth A. 2015. Chemical safety assessment using read-across: assessing the use of novel testing methods to strengthen the evidence base for decision making. Environ Health Perspect 123:1232

  10. Real-time safety risk assessment based on a real-time location system for hydropower construction sites.

    Science.gov (United States)

    Jiang, Hanchen; Lin, Peng; Fan, Qixiang; Qiang, Maoshan

    2014-01-01

    The concern for workers' safety in construction industry is reflected in many studies focusing on static safety risk identification and assessment. However, studies on real-time safety risk assessment aimed at reducing uncertainty and supporting quick response are rare. A method for real-time safety risk assessment (RTSRA) to implement a dynamic evaluation of worker safety states on construction site has been proposed in this paper. The method provides construction managers who are in charge of safety with more abundant information to reduce the uncertainty of the site. A quantitative calculation formula, integrating the influence of static and dynamic hazards and that of safety supervisors, is established to link the safety risk of workers with the locations of on-site assets. By employing the hidden Markov model (HMM), the RTSRA provides a mechanism for processing location data provided by the real-time location system (RTLS) and analyzing the probability distributions of different states in terms of false positives and negatives. Simulation analysis demonstrated the logic of the proposed method and how it works. Application case shows that the proposed RTSRA is both feasible and effective in managing construction project safety concerns.

  11. Determination of the number of software tests using probabilistic safety assessment

    International Nuclear Information System (INIS)

    Kang, H. K.; Seong, T. Y.; Lee, K. Y.

    2000-01-01

    The broader usage of digital equipment in nuclear power plants gives rise to the safety problems of software. The field test should be performed before the software is used in critical applications because it is well known that software shows non-linear response when it is applied to different target systems in different environment. In the case of safety-critical applications, the result of tests contains usually zero failure case and the satisfiable number of tests is hard to be determined. In this paper, we suggests the method to determine the number of software tests without failure using the probabilistic safety assessment. From the result of the probabilistic safety assessment on total system, the desirable unavailability of software is calculated and the number of tests is determined

  12. AGR core safety assessment methodologies

    International Nuclear Information System (INIS)

    McLachlan, N.; Reed, J.; Metcalfe, M.P.

    1996-01-01

    To demonstrate the safety of its gas-cooled graphite-moderated AGR reactors, nuclear safety assessments of the cores are based upon a methodology which demonstrates no component failures, geometrical stability of the structure and material properties bounded by a database. All AGRs continue to meet these three criteria. However, predictions of future core behaviour indicate that the safety case methodology will eventually need to be modified to deal with new phenomena. A new approach to the safety assessment of the cores is currently under development, which can take account of these factors while at the same time providing the same level of protection for the cores. This approach will be based on the functionality of the core: unhindered movement of control rods, continued adequate cooling of the fuel and the core, continued ability to charge and discharge fuel. (author). 5 figs

  13. Safety assessment of foods from genetically modified crops in countries with developing economies.

    Science.gov (United States)

    Delaney, Bryan

    2015-12-01

    Population growth particularly in countries with developing economies will result in a need to increase food production by 70% by the year 2050. Biotechnology has been utilized to produce genetically modified (GM) crops for insect and weed control with benefits including increased crop yield and will also be used in emerging countries. A multicomponent safety assessment paradigm has been applied to individual GM crops to determine whether they as safe as foods from non-GM crops. This paper reviews methods to assess the safety of foods from GM crops for safe consumption from the first generation of GM crops. The methods can readily be applied to new products developed within country and this paper will emphasize the concept of data portability; that safety data produced in one geographic location is suitable for safety assessment regardless of where it is utilized. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  14. Research on consequence analysis method for probabilistic safety assessment of nuclear fuel facilities (5). Evaluation method and trial evaluation of criticality accident

    International Nuclear Information System (INIS)

    Yamane, Yuichi; Abe, Hitoshi; Nakajima, Ken; Hayashi, Yoshiaki; Arisawa, Jun; Hayami, Satoru

    2010-01-01

    A special committee of 'Research on the analysis methods for accident consequence of nuclear fuel facilities (NFFs)' was organized by the Atomic Energy Society of Japan (AESJ) under the entrustment of Japan Atomic Energy Agency (JAEA). The committee aims to research on the state-of-the-art consequence analysis method for the Probabilistic Safety Assessment (PSA) of NFFs, such as fuel reprocessing and fuel fabrication facilities. The objectives of this research are to obtain information useful for establishing quantitative performance objectives and to demonstrate risk-informed regulation through qualifying issues needed to be resolved for applying PSA to NFFs. The research activities of the committee were mainly focused on the consequence analysis method for postulated accidents with potentially large consequences in NFFs, e.g., events of criticality, spill of molten glass, hydrogen explosion, boiling of radioactive solution and fire (including the rapid decomposition of TBP complexes), resulting in the release of radioactive materials to the environment. The results of the research were summarized in a series of six reports, which consist of a review report and five technical ones. In this report, the evaluation methods of criticality accident, such as simplified methods, one-point reactor kinetics codes and quasi-static method, were investigated and their features were summarized to provide information useful for the safety evaluation of NFFs. In addition, several trial evaluations were performed for a hypothetical scenario of criticality accident using the investigated methods, and their results were compared. The release fraction of volatile fission products in a criticality accident was also investigated. (author)

  15. Procedures for self-assessment of operational safety

    International Nuclear Information System (INIS)

    1997-08-01

    Self-assessment processes have been continuously developed by nuclear organizations, including nuclear power plants. Currently, the nuclear industry and governmental organizations are showing an increasing interest in the implementation of this process as an effective way for improving safety performance. Self-assessment involves the use of different types of tools and mechanisms to assist the organizations in assessing their own safety performance against given standards. This helps to enhance the understanding of the need for improvements, the feeling of ownership in achieving them and and the safety culture as a whole. The concepts developed in this report present the basic approach to self-assessment taking into consideration experience gained during Operational Safety Review Team (OSART) missions, from organizations and utilities which have successfully implemented parts of a self-assessment programme and from meetings organized to discuss the subject

  16. Safety assessment for a KBS-3H spent nuclear fuel repository at Olkiluoto. Complementary evaluations of safety

    International Nuclear Information System (INIS)

    Neall, Fiona; Pastina, Barbara; Snellman, Margit; Smith, Paul; Gribi, P.; Johnson, Lawrence

    2008-12-01

    The KBS-3H design is a variant of the more general KBS-3 method for the geological disposal of spent nuclear fuel in Finland and Sweden. In the KBS-3H design, multiple assemblies containing spent fuel are emplaced horizontally in parallel, approximately 300 m long, slightly inclined deposition drifts. The copper canisters, each with a surrounding layer of bentonite clay, are placed in perforated steel shells prior to deposition in the drifts; the assembly is called the 'supercontainer'. The other KBS-3 variant is the KBS-3V design, in which the copper canisters are emplaced vertically in individual deposition holes surrounded by bentonite clay but without steel supercontainer shells. SKB and Posiva have conducted a Research, Development and Demonstration programme over the period 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to KBS-3V. As part of this programme, the long-term safety of a KBS-3H repository has been assessed in the KBS-3H safety studies. In order to focus the safety studies, the Olkiluoto site in the municipality of Eurajoki, which is the proposed site for a spent fuel repository in Finland, was used as a hypothetical site for a KBS-3H repository. The present report is part of a portfolio of reports discussing the long-term safety of the KBS-3H repository. The overall outcome of the KBS-3H safety studies is documented in the summary report, 'Safety assessment for a KBS-3H repository for spent nuclear fuel at Olkiluoto'. The purpose and scope of the KBS-3H complementary evaluations of safety report is provided in Posiva's Safety Case Plan, which is based on Regulatory Guide YVL 8.4 and on international guidelines on complementary lines of argument to long-term safety that are considered an important element of a post-closure safety case for geological repositories. Complementary evaluations of safety require the use of evaluations, evidence and qualitative supporting arguments that lie outside the

  17. Adverse Outcome Pathways can drive non-animal approaches for safety assessment.

    Science.gov (United States)

    Burden, Natalie; Sewell, Fiona; Andersen, Melvin E; Boobis, Alan; Chipman, J Kevin; Cronin, Mark T D; Hutchinson, Thomas H; Kimber, Ian; Whelan, Maurice

    2015-09-01

    Adverse Outcome Pathways (AOPs) provide an opportunity to develop new and more accurate safety assessment processes for drugs and other chemicals, and may ultimately play an important role in regulatory decision making. Not only can the development and application of AOPs pave the way for the development of improved evidence-based approaches for hazard and risk assessment, there is also the promise of a significant impact on animal welfare, with a reduced reliance on animal-based methods. The establishment of a useable and coherent knowledge framework under which AOPs will be developed and applied has been a first critical step towards realizing this opportunity. This article explores how the development of AOPs under this framework, and their application in practice, could benefit the science and practice of safety assessment, while in parallel stimulating a move away from traditional methods towards an increased acceptance of non-animal approaches. We discuss here the key areas where current, and future initiatives should be focused to enable the translation of AOPs into routine chemical safety assessment, and lasting 3Rs benefits. © 2015 The Authors. Journal of Applied Toxicology published by John Wiley & Sons Ltd.

  18. Ab initio chemical safety assessment: A workflow based on exposure considerations and non-animal methods.

    Science.gov (United States)

    Berggren, Elisabet; White, Andrew; Ouedraogo, Gladys; Paini, Alicia; Richarz, Andrea-Nicole; Bois, Frederic Y; Exner, Thomas; Leite, Sofia; Grunsven, Leo A van; Worth, Andrew; Mahony, Catherine

    2017-11-01

    We describe and illustrate a workflow for chemical safety assessment that completely avoids animal testing. The workflow, which was developed within the SEURAT-1 initiative, is designed to be applicable to cosmetic ingredients as well as to other types of chemicals, e.g. active ingredients in plant protection products, biocides or pharmaceuticals. The aim of this work was to develop a workflow to assess chemical safety without relying on any animal testing, but instead constructing a hypothesis based on existing data, in silico modelling, biokinetic considerations and then by targeted non-animal testing. For illustrative purposes, we consider a hypothetical new ingredient x as a new component in a body lotion formulation. The workflow is divided into tiers in which points of departure are established through in vitro testing and in silico prediction, as the basis for estimating a safe external dose in a repeated use scenario. The workflow includes a series of possible exit (decision) points, with increasing levels of confidence, based on the sequential application of the Threshold of Toxicological (TTC) approach, read-across, followed by an "ab initio" assessment, in which chemical safety is determined entirely by new in vitro testing and in vitro to in vivo extrapolation by means of mathematical modelling. We believe that this workflow could be applied as a tool to inform targeted and toxicologically relevant in vitro testing, where necessary, and to gain confidence in safety decision making without the need for animal testing.

  19. Guiding principles for the implementation of non-animal safety assessment approaches for cosmetics: skin sensitisation.

    Science.gov (United States)

    Goebel, Carsten; Aeby, Pierre; Ade, Nadège; Alépée, Nathalie; Aptula, Aynur; Araki, Daisuke; Dufour, Eric; Gilmour, Nicola; Hibatallah, Jalila; Keller, Detlef; Kern, Petra; Kirst, Annette; Marrec-Fairley, Monique; Maxwell, Gavin; Rowland, Joanna; Safford, Bob; Schellauf, Florian; Schepky, Andreas; Seaman, Chris; Teichert, Thomas; Tessier, Nicolas; Teissier, Silvia; Weltzien, Hans Ulrich; Winkler, Petra; Scheel, Julia

    2012-06-01

    Characterisation of skin sensitisation potential is a key endpoint for the safety assessment of cosmetic ingredients especially when significant dermal exposure to an ingredient is expected. At present the mouse local lymph node assay (LLNA) remains the 'gold standard' test method for this purpose however non-animal test methods are under development that aim to replace the need for new animal test data. COLIPA (the European Cosmetics Association) funds an extensive programme of skin sensitisation research, method development and method evaluation and helped coordinate the early evaluation of the three test methods currently undergoing pre-validation. In May 2010, a COLIPA scientific meeting was held to analyse to what extent skin sensitisation safety assessments for cosmetic ingredients can be made in the absence of animal data. In order to propose guiding principles for the application and further development of non-animal safety assessment strategies it was evaluated how and when non-animal test methods, predictions based on physico-chemical properties (including in silico tools), threshold concepts and weight-of-evidence based hazard characterisation could be used to enable safety decisions. Generation and assessment of potency information from alternative tools which at present is predominantly derived from the LLNA is considered the future key research area. Copyright © 2012 Elsevier Inc. All rights reserved.

  20. An Evaluation Method for Team Competencies to Enhance Nuclear Safety Culture

    International Nuclear Information System (INIS)

    Hang, S. M.; Seong, P. H.; Kim, A. R.

    2016-01-01

    Safety culture has received attention in safety-critical industries, including nuclear power plants (NPPs), due to various prominent accidents such as concealment of a Station Blackout (SBO) of Kori NPP unit 1 in 2012, the Sewol ferry accident in 2014, and the Chernobyl accident in 1986. Analysis reports have pointed out that one of the major contributors to the cause of the accidents is ‘the lack of safety culture’. The term, nuclear safety culture, was firstly defined after the Chernobyl accident by the IAEA in INSAG report no. 4, as follows “Safety culture is that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted their significance.” Afterwards, a wide consensus grew among researchers and nuclear-related organizations, that safety culture should be evaluated and managed in a certain manner. Consequently, each nuclear-related organization defined and developed their own safety culture definitions and assessment methods. However, none of these methods provides a way for an individual or a team to enhance the safety culture of an organization. Especially for a team, which is the smallest working unit in NPPs, team members easily overlook their required practices to improve nuclear safety culture. Therefore in this study, we suggested a method to estimate nuclear safety culture of a team, by approaching with the ‘competency’ point of view. The competency is commonly focused on individuals, and defined as, “underlying characteristics of an individual that are causally related to effective or superior performance in a job.” Similar to safety culture, the definition of competency focuses on characteristics and attitudes of individuals. Thus, we defined ‘safety culture competency’ as “underlying characteristics and outward attitudes of individuals that are causally related to a healthy and strong nuclear safety

  1. Comparison of methods used in European countries to assess buildings' condition

    NARCIS (Netherlands)

    Vilhena, A.; Costa Branco De Oliveira Pedro, J.A.; De Brito, J.

    2011-01-01

    This paper presents a comparative analysis of methods used in European countries to assess buildings’ condition. The following methods were compared: a Portuguese method to assess buildings condition, an English housing health and safety rating system, a French method to assess buildings that may be

  2. Safety evaluations required in the safety regulations for Monju and the validity confirmation of safety evaluation methods

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    The purposes of this study are to perform the safety evaluations of the fast breeder reactor 'Monju' and to confirm the validity of the safety evaluation methods. In JFY 2012, the following results were obtained. As for the development of safety evaluation methods needed in the safety examination achieved for the reactor establishment permission, development of the analysis codes, such as a core damage analysis code, were carried out according to the plan. As for the development of the safety evaluation method needed for the risk informed safety regulation, the quantification technique of the event tree using the Continuous Markov chain Monte Carlo method (CMMC method) were studied. (author)

  3. Risk assessment on hazards for decommissioning safety of a nuclear facility

    International Nuclear Information System (INIS)

    Jeong, Kwan-Seong; Lee, Kune-Woo; Lim, Hyeon-Kyo

    2010-01-01

    A decommissioning plan should be followed by a qualitative and quantitative safety assessment of it. The safety assessment of a decommissioning plan is applied to identify the potential (radiological and non-radiological) hazards and risks. Radiological and non-radiological hazards arise during decommissioning activities. The non-radiological or industrial hazards to which workers are subjected during a decommissioning and dismantling process may be greater than those experienced during an operational lifetime of a facility. Workers need to be protected by eliminating or reducing the radiological and non-radiological hazards that may arise during routine decommissioning activities and as well as during accidents. The risk assessment method was developed by using risk matrix and fuzzy inference logic, on the basis of the radiological and non-radiological hazards for a decommissioning safety of a nuclear facility. Fuzzy inference of radiological and non-radiological hazards performs a mapping from radiological and non-radiological hazards to risk matrix. Defuzzification of radiological and non-radiological hazards is the conversion of risk matrix and priorities to the maximum criterion method and the mean criterion method. In the end, a composite risk assessment methodology, to rank the risk level on radiological and non-radiological hazards of the decommissioning tasks and to prioritize on the risk level of the decommissioning tasks, by simultaneously combining radiological and non-radiological hazards, was developed.

  4. A Framework for Assessment of Aviation Safety Technology Portfolios

    Science.gov (United States)

    Jones, Sharon M.; Reveley, Mary S.

    2014-01-01

    The programs within NASA's Aeronautics Research Mission Directorate (ARMD) conduct research and development to improve the national air transportation system so that Americans can travel as safely as possible. NASA aviation safety systems analysis personnel support various levels of ARMD management in their fulfillment of system analysis and technology prioritization as defined in the agency's program and project requirements. This paper provides a framework for the assessment of aviation safety research and technology portfolios that includes metrics such as projected impact on current and future safety, technical development risk and implementation risk. The paper also contains methods for presenting portfolio analysis and aviation safety Bayesian Belief Network (BBN) output results to management using bubble charts and quantitative decision analysis techniques.

  5. Uncertainty analysis in safety assessment

    International Nuclear Information System (INIS)

    Lemos, Francisco Luiz de; Sullivan, Terry

    1997-01-01

    Nuclear waste disposal is a very complex subject which requires the study of many different fields of science, like hydro geology, meteorology, geochemistry, etc. In addition, the waste disposal facilities are designed to last for a very long period of time. Both of these conditions make safety assessment projections filled with uncertainty. This paper addresses approaches for treatment of uncertainties in the safety assessment modeling due to the variability of data and some current approaches used to deal with this problem. (author)

  6. NUMO's approach for long-term safety assessment - 59404

    International Nuclear Information System (INIS)

    Ebashi, Takeshi; Kaku, Kenichi; Ishiguro, Katsuhiko

    2012-01-01

    One of NUMO's policies for ensuring safety is staged and flexible project implementation and decision-making based on iterative confirmation of safety. The safety assessment takes the central role in multiple lines of reasoning and argumentation by providing a quantitative evaluation of long-term safety; a key aspect is uncertainty management. This paper presents NUMO's basic strategies for long-term safety assessment based on the above policy. NUMO's approach considering Japanese boundary conditions is demonstrated as a starting-point for evaluating the long-term safety of an actual site. In Japan, the Act on Final Disposal of Specified Radioactive Waste states that the siting process shall consist of three stages. The Nuclear Waste Management Organization of Japan (NUMO) is responsible for geological disposal of vitrified high-level waste and some types of TRU waste. NUMO has chosen to implement a volunteer approach to siting. NUMO decided to prepare the so-called 2010 technical report, which sets out three safety policies, one of which is staged project implementation and decision-making based on iterative confirmation of safety. Based on this policy, NUMO will gradually integrate relevant interdisciplinary knowledge to build a safety case when a formal volunteer application is received that would allow site investigations to be initiated. The safety assessment takes the central role in multiple lines of reasoning and argumentation by providing a quantitative evaluation of long-term safety; one of a key aspect is uncertainty management. This paper presents the basic strategies for NUMO's long-term safety assessment based on the above policy. In concrete terms, the common procedures involved in safety assessment are applied in a stepwise manner, based on integration of knowledge obtained from site investigations/evaluations and engineered measures. The results of the safety assessment are then reflected in the planning of site investigations and engineered

  7. Health, safety and environment risk assessment in gas pipelines by indexing method:case of Kermanshah Sanandaj oil pipeline

    Directory of Open Access Journals (Sweden)

    Y. Hamidi

    2009-10-01

    Full Text Available Background and AimsUsing pipelines for oil products transportation involves ranges of safety, health and environmental risks, this option however, is dominant with numerous  advantages. The purpose of this study was; relative risk assessment of abovementioned risk in Kermanshah-Sanandaj Oil Pipeline.MethodsThe method used in this study was Kent Muhlbauer method in which relative risk was assessed using third-party damage, corrosion, design, incorrect operations and leak impact  factor.ResultsOnce applying this method, collection of required data and performing needed experiments, scoring results showed 96 risk segments along the pipeline length in which lengths 100+860, 101+384 and 103+670 had relative risk scores 9.74, 9.82 and 9.91 respectively and therefore these segments were identified as focal risk points and priority for improvement actions.ConclusionRegarding importance of pipeline failure, inspection and regular patrol along the pipeline route, precise control of cathodic protection of pipeline and using communication technologies such as SCADA or optical fibers along the pipeline route were amongst the mostimportant control action suggested by the study.

  8. Assessment of reliability and validity of a new safety culture questionnaire

    Directory of Open Access Journals (Sweden)

    A.A. Farshad

    2010-04-01

    Full Text Available Background and aims   As a Development of Industrial process, human, environment, equipment, material and validity of system has been exposed to hazardous conditions. Regards of 32.3 percent of occupations in industries, this study focused on risk assessment of foundry unit by energy trace and barrier analysis (ETBA method and presented approaches to control of accident.     Methods   the recent study is as a case study one to risk assessment in a foundry unit in Qazvin industrial city in1387. In this study risks were founded by ETBA method and evaluated by MILSTD- 882B. Data were collected by direct observations, interview with workers and supervisor and engineers, walking-talking through method, documents investigation of operational processors, preventive maintenances, equipment technical properties, accidental and medical documents. Finally ETBA worksheets completed.     Results   totally 154 risks has been found. 40 from total are been unacceptable risk, 68 unfavorable and also 46 acceptable but with remediation action. Casting workshop had risks more than other workshops (with 74 identified risks.Potential and heat energies were founded as most   hazardous energies, with respectively 51 and 38 risk cases.     Conclusion   This study recommended to be done actions for identification and control risk, such as: safety training, occupation training, preventive maintenance, contract safety, safety  communication and safety audit group.  

  9. A Methodology To Incorporate The Safety Culture Into Probabilistic Safety Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sunghyun; Kim, Namyeong; Jae, Moosung [Hanyang University, Seoul (Korea, Republic of)

    2015-10-15

    In order to incorporate organizational factors into PSA, a methodology needs to be developed. Using the AHP to weigh organizational factors as well as the SLIM to rate those factors, a methodology is introduced in this study. The safety issues related to nuclear safety culture have occurred increasingly. The quantification tool has to be developed in order to include the organizational factor into Probabilistic Safety Assessments. In this study, the state-of-the-art for the organizational evaluation methodologies has been surveyed. This study includes the research for organizational factors, maintenance process, maintenance process analysis models, a quantitative methodology using Analytic Hierarchy Process, Success Likelihood Index Methodology. The purpose of this study is to develop a methodology to incorporate the safety culture into PSA for obtaining more objective risk than before. The organizational factor considered in nuclear safety culture might affect the potential risk of human error and hardware-failure. The safety culture impact index to monitor the plant safety culture can be assessed by applying the developed methodology into a nuclear power plant.

  10. A Methodology To Incorporate The Safety Culture Into Probabilistic Safety Assessments

    International Nuclear Information System (INIS)

    Park, Sunghyun; Kim, Namyeong; Jae, Moosung

    2015-01-01

    In order to incorporate organizational factors into PSA, a methodology needs to be developed. Using the AHP to weigh organizational factors as well as the SLIM to rate those factors, a methodology is introduced in this study. The safety issues related to nuclear safety culture have occurred increasingly. The quantification tool has to be developed in order to include the organizational factor into Probabilistic Safety Assessments. In this study, the state-of-the-art for the organizational evaluation methodologies has been surveyed. This study includes the research for organizational factors, maintenance process, maintenance process analysis models, a quantitative methodology using Analytic Hierarchy Process, Success Likelihood Index Methodology. The purpose of this study is to develop a methodology to incorporate the safety culture into PSA for obtaining more objective risk than before. The organizational factor considered in nuclear safety culture might affect the potential risk of human error and hardware-failure. The safety culture impact index to monitor the plant safety culture can be assessed by applying the developed methodology into a nuclear power plant

  11. Method for assessing reliability of a network considering probabilistic safety assessment

    International Nuclear Information System (INIS)

    Cepin, M.

    2005-01-01

    A method for assessment of reliability of the network is developed, which uses the features of the fault tree analysis. The method is developed in a way that the increase of the network under consideration does not require significant increase of the model. The method is applied to small examples of network consisting of a small number of nodes and a small number of their connections. The results give the network reliability. They identify equipment, which is to be carefully maintained in order that the network reliability is not reduced, and equipment, which is a candidate for redundancy, as this would improve network reliability significantly. (author)

  12. Review of probabilistic safety assessments: insights and recommendations regarding further developments

    International Nuclear Information System (INIS)

    Spitzer, C.

    1996-01-01

    Probabilistic Safety Assessments (PSAs) performed by utilities in the framework of Periodic Safety Reviews for German nuclear power plants are reviewed by TUeV Suedwest. Insights gained and recommendations concerning the necessity and focus of further developments and applications according to practical requests for the performance and assessment of PSAs within regulatory procedures are presented in this paper. Further on, recommendations are made in order to ensure the validity of the results of PSAs necessary in order to achieve the goals thereof. Beside some general points of view the emphasis of the paper is on methodological aspects with respect to evaluation methods and assessment of common cause failures as well as human reliability assessment

  13. Complementary safety assessments - Report by the French Nuclear Safety Authority

    International Nuclear Information System (INIS)

    2011-12-01

    As an immediate consequence of the Fukushima accident, the French Authority of Nuclear Safety (ASN) launched a campaign of on-site inspections and asked operators (mainly EDF, AREVA and CEA) to make complementary assessments of the safety of the nuclear facilities they manage. The approach defined by ASN for the complementary safety assessments (CSA) is to study the behaviour of nuclear facilities in severe accidents situations caused by an off-site natural hazard according to accident scenarios exceeding the current baseline safety requirements. This approach can be broken into 2 phases: first conformity to current design and secondly an approach to the beyond design-basis scenarios built around the principle of defence in depth. 38 inspections were performed on issues linked to the causes of the Fukushima crisis. It appears that some sites have to reinforce the robustness of the heat sink. The CSA confirmed that the processes put into place at EDF to detect non-conformities were satisfactory. The complementary safety assessments demonstrated that the current seismic margins on the EDF nuclear reactors are satisfactory. With regard to flooding, the complementary safety assessments show that the complete reassessment carried out following the flooding of the Le Blayais nuclear power plant in 1999 offers the installations a high level of protection against the risk of flooding. Concerning the loss of electrical power supplies and the loss of cooling systems, the analysis of EDF's CSA reports showed that certain heat sink and electrical power supply loss scenarios can, if nothing is done, lead to core melt in just a few hours in the most unfavourable circumstances. As for nuclear facilities that are not power or experimental reactors, some difficulties have appeared to implement the CSA approach that was initially devised for reactors. Generally speaking, ASN considers that the safety of nuclear facilities must be made more robust to improbable risks which are not

  14. Development of the KBS-3 method. Survey of SKB's research programs and safety assessments, reviews by Government authorities and SKB's international research cooperation

    International Nuclear Information System (INIS)

    2010-11-01

    The purpose of this report is to outline the origin and development over the past 30 years (up to 2009) of the KBS-3 method proposed by the Swedish Nuclear Fuel and Waste Management Co (SKB) for final disposal of spent nuclear fuel. The KBS-3 method is based on three protective barriers. The spent nuclear fuel is encapsulated in impermeable copper canisters. The canisters are placed in crystalline basement rock at a depth of 400-700 metres, embedded in bentonite clay. After disposal the tunnels and rock caverns are sealed. The account does not claim to cover all parts of the extensive technical and scientific research and development work conducted by SKB in form of collecting data, refining methods and increasing process understanding. The report forms part of the background material which SKB has gathered as a basis for future applications regarding permits under the Environmental Code and the Nuclear Activities Act to build and operate facilities for encapsulation and final disposal of spent nuclear fuel. A prominent feature of the industrial development work on the final disposal of spent nuclear fuel has been an openness for a constant input of ideas and opinions from society and public bodies (the Government, national authorities, universities and other institutes of higher education, municipalities and various non-governmental organizations). The presentation sheds light on developments in a number of areas that are of central importance for safety in a KBS-3 repository. In SKB's RDandD Programme 2007, these areas go under the headings rock line, buffer line, canister line, backfilling line and closure line. Furthermore, attention has been given to issues related to the possible retrieval of deposited canisters, variants of KBS-3, deposition technology and safety assessment, as well as a number of interdisciplinary issues. The development of methods for the safety assessment has been an important part of the development of the KBS-3 method. The work with

  15. Development and applications of a safety assessment system for promoting safety culture in nuclear power plants

    International Nuclear Information System (INIS)

    Takano, Ken-ichi; Hasegawa, Naoko; Hirose, Ayako; Hayase, Ken-ichi

    2004-01-01

    For past five years, CRIEPI has been continuing efforts to develop and make applications of a 'safety assessment system' which enable to measure the safety level of organization. This report describe about frame of the system, assessment results and its reliability, and relation between labor accident rate in the site and total safety index (TSI), which can be obtained by the principal factors analysis. The safety assessment in this report is based on questionnaire survey of employee. The format and concrete questionnaires were developed using existing literatures including organizational assessment tools. The tailored questionnaire format involved 124 questionnaire items. The assessment results could be considered as a well indicator of the safety level of organization, safety management, and safety awareness of employee. (author)

  16. A Reliability Assessment Method for the VHTR Safety Systems

    International Nuclear Information System (INIS)

    Lee, Hyung Sok; Jae, Moo Sung; Kim, Yong Wan

    2011-01-01

    The Passive safety system by very high temperature reactor which has attracted worldwide attention in the last century is the reliability safety system introduced for the improvement in the safety of the next generation nuclear power plant design. The Passive system functionality does not rely on an external source of energy, but on an intelligent use of the natural phenomena, such as gravity, conduction and radiation, which are always present. Because of these features, it is difficult to evaluate the passive safety on the risk analysis methodology having considered the existing active system failure. Therefore new reliability methodology has to be considered. In this study, the preliminary evaluation and conceptualization are tried, applying the concept of the load and capacity from the reliability physics model, designing the new passive system analysis methodology, and the trial applying to paper plant.

  17. Safety culture' is integrating 'human' into risk assessment

    International Nuclear Information System (INIS)

    Sugimoto, Taiji

    2014-01-01

    Significance of Fukushima nuclear power accident requested reconsideration of safety standards, of which we had usually no doubt. Risk assessment standard (JIS B 9702), Which was used for repetition of database preparation and cumulative assessment, defined allowable risk and residual risk. However, work site and immediate assessment was indispensable beside such assessment so as to ensure safety. Risk of casualties was absolutely not acceptable in principle and judgments to approve allowable risk needed accountability, which was reminded by safety culture proposed by IAEA and also identified by investigation of organizational cause of Columbia accident. Actor of safety culture would be organization and individual, and mainly individual. Realization of safety culture was conducted by personnel having moral consciousness and firm sense of mission in the course of jobs and working daily with sweat pouring. Safety engineering/technology should have framework integrating human as such totality. (T. Tanaka)

  18. Safety assessment for a KBS-3H spent nuclear fuel repository at Olkiluoto. Complementary evaluations of safety

    Energy Technology Data Exchange (ETDEWEB)

    Neall, Fiona; Pastina, Barbara; Snellman, Margit; Smith, Paul; Gribi, P.; Johnson, Lawrence

    2008-12-15

    The KBS-3H design is a variant of the more general KBS-3 method for the geological disposal of spent nuclear fuel in Finland and Sweden. In the KBS-3H design, multiple assemblies containing spent fuel are emplaced horizontally in parallel, approximately 300 m long, slightly inclined deposition drifts. The copper canisters, each with a surrounding layer of bentonite clay, are placed in perforated steel shells prior to deposition in the drifts; the assembly is called the 'supercontainer'. The other KBS-3 variant is the KBS-3V design, in which the copper canisters are emplaced vertically in individual deposition holes surrounded by bentonite clay but without steel supercontainer shells. SKB and Posiva have conducted a Research, Development and Demonstration programme over the period 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to KBS-3V. As part of this programme, the long-term safety of a KBS-3H repository has been assessed in the KBS-3H safety studies. In order to focus the safety studies, the Olkiluoto site in the municipality of Eurajoki, which is the proposed site for a spent fuel repository in Finland, was used as a hypothetical site for a KBS-3H repository. The present report is part of a portfolio of reports discussing the long-term safety of the KBS-3H repository. The overall outcome of the KBS-3H safety studies is documented in the summary report, 'Safety assessment for a KBS-3H repository for spent nuclear fuel at Olkiluoto'. The purpose and scope of the KBS-3H complementary evaluations of safety report is provided in Posiva's Safety Case Plan, which is based on Regulatory Guide YVL 8.4 and on international guidelines on complementary lines of argument to long-term safety that are considered an important element of a post-closure safety case for geological repositories. Complementary evaluations of safety require the use of evaluations, evidence and qualitative supporting arguments

  19. Human-system safety methods for development of advanced air traffic management systems

    International Nuclear Information System (INIS)

    Nelson, William R.

    1999-01-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) is supporting the National Aeronautics and Space Administration in the development of advanced air traffic management (ATM) systems as part of the Advanced Air Transportation Technologies program. As part of this program INEEL conducted a survey of human-system safety methods that have been applied to complex technical systems, to identify lessons learned from these applications and provide recommendations for the development of advanced ATM systems. The domains that were surveyed included offshore oil and gas, commercial nuclear power, commercial aviation, and military. The survey showed that widely different approaches are used in these industries, and that the methods used range from very high-level, qualitative approaches to very detailed quantitative methods such as human reliability analysis (HRA) and probabilistic safety assessment (PSA). In addition, the industries varied widely in how effectively they incorporate human-system safety assessment in the design, development, and testing of complex technical systems. In spite of the lack of uniformity in the approaches and methods used, it was found that methods are available that can be combined and adapted to support the development of advanced air traffic management systems (author) (ml)

  20. Triangulation and the importance of establishing valid methods for food safety culture evaluation.

    Science.gov (United States)

    Jespersen, Lone; Wallace, Carol A

    2017-10-01

    The research evaluates maturity of food safety culture in five multi-national food companies using method triangulation, specifically self-assessment scale, performance documents, and semi-structured interviews. Weaknesses associated with each individual method are known but there are few studies in food safety where a method triangulation approach is used for both data collection and data analysis. Significantly, this research shows that individual results taken in isolation can lead to wrong conclusions, resulting in potentially failing tactics and wasted investments. However, by applying method triangulation and reviewing results from a range of culture measurement tools it is possible to better direct investments and interventions. The findings add to the food safety culture paradigm beyond a single evaluation of food safety culture using generic culture surveys. Copyright © 2017. Published by Elsevier Ltd.

  1. Uncertainty analysis in safety assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lemos, Francisco Luiz de [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil); Sullivan, Terry [Brookhaven National Lab., Upton, NY (United States)

    1997-12-31

    Nuclear waste disposal is a very complex subject which requires the study of many different fields of science, like hydro geology, meteorology, geochemistry, etc. In addition, the waste disposal facilities are designed to last for a very long period of time. Both of these conditions make safety assessment projections filled with uncertainty. This paper addresses approaches for treatment of uncertainties in the safety assessment modeling due to the variability of data and some current approaches used to deal with this problem. (author) 13 refs.; e-mail: lemos at bnl.gov; sulliva1 at bnl.gov

  2. Substantial equivalence--an appropriate paradigm for the safety assessment of genetically modified foods?

    International Nuclear Information System (INIS)

    Kuiper, Harry A.; Kleter, Gijs A.; Noteborn, Hub P.J.M.; Kok, Esther J.

    2002-01-01

    Safety assessment of genetically modified food crops is based on the concept of substantial equivalence, developed by OECD and further elaborated by FAO/WHO. The concept embraces a comparative approach to identify possible differences between the genetically modified food and its traditional comparator, which is considered to be safe. The concept is not a safety assessment in itself, it identifies hazards but does not assess them. The outcome of the comparative exercise will further guide the safety assessment, which may include (immuno)toxicological and biochemical testing. Application of the concept of substantial equivalence may encounter practical difficulties: (i) the availability of near-isogenic parental lines to compare the genetically modified food with; (ii) limited availability of methods for the detection of (un)intended effects resulting from the genetic modification; and (iii) limited information on natural variations in levels of relevant crop constituents. In order to further improve the methodology for identification of unintended effects, new 'profiling' methods are recommended. Such methods will allow for the screening of potential changes in the modified host organism at different integration levels, i.e. at the genome level, during gene expression and protein translation, and at the level of cellular metabolism

  3. METHODS OF CONTROL DIPHTHERIA VACCINE SAFETY

    Directory of Open Access Journals (Sweden)

    Isayenko Ye. Yu

    2016-12-01

    Full Text Available Vaccination success depends not only on the timely coverage of threatened contingents, but also on the quality of vaccines. Every day, the requirements for security guarantees vaccines and their use guarantees of security increases. For the fast, reliable and independent scientific assessment of vaccine safety issues, WHO in 1999 created the Global Advisory Committee on Vaccine Safety. To enhance the capacity of pharmaceutical supervision in relation to vaccines in 2012 it was developed the Global Vaccine Safety Initiative. The main directions of the Global Vaccine Safety programs are considered in this review. It’s noted more strict requirements of Ukrainian pharmaceutical industry to produce public immunization drugs regulated Supplements to the State Pharmacopoeia of Ukraine, in comparison with other countries. This review considered diphtheria vaccine safety monitoring in the process of production according to the recommendations of the World Health Organization (WHO, described a subcutaneous method for determining the specific toxicity of the combined purified toxoid, characterized an intracutaneous method of determining of the presence of diphtheria toxin in each sample of the combined purified toxoid, that additionally used by some manufacturers. The definition of diphtheria toxin in dilutions of purified toxoid is presented. This review considered diphtheria vaccine safety monitoring in the process of production according to the recommendations of the World Health Organization (WHO, described a subcutaneous method for determining the specific toxicity of the combined purified toxoid, characterized an intracutaneous method of determining of the presence of diphtheria toxin in each sample of the combined purified toxoid, that additionally used by some manufacturers. The definition of diphtheria toxin in dilutions of purified toxoid is presented. As methods for determination of diphtheria toxin must be able to detect even a small amount

  4. Safety assessment of foods derived from genetically modified crops

    NARCIS (Netherlands)

    Kleter, G.A.; Kuiper, H.A.

    2003-01-01

    The pre-market safety assessment of foods derived from genetically modified crops is carried out according to the consensus approach of "substantial equivalence", in other words: the comparative safety assessment. Currently, the safety assessment of genetically modified foods is harmonized at the

  5. Geophysics Methods in Electrometric Assessment of Dams

    Energy Technology Data Exchange (ETDEWEB)

    Davydov, V. A., E-mail: davydov-va@yandex.ru; Baidikov, S. V., E-mail: badikek@mail.ru; Gorshkov, V. Yu., E-mail: vitalaa@yandex.ru; Malikov, A. V., E-mail: alex.mal.1986@mail.ru [Russian Academy of Sciences, Geophysical Institute, Ural Branch (Russian Federation)

    2016-07-15

    The safety assessment of hydraulic structures is proposed to be conducted via geoelectric measurements, which are capable of assessing the health of earth dams in their natural bedding without intervention in their structure. Geoelectric measurements are shown as being capable of pinpointing hazardous parts of a dam, including areas of elevated seepage. Applications of such methods are shown for a number of mini-dams in the Sverdlovsk region. Aparameter (effective longitudinal conductivity) that may be used to monitor the safety of hydraulic structures is proposed. Quantitative estimates of this parameter are given in terms of the degree of safely.

  6. Methods and strategies for future reactor safety goals

    Science.gov (United States)

    Arndt, Steven Andrew

    There have been significant discussions over the past few years by the United States Nuclear Regulatory Commission (NRC), the Advisory Committee on Reactor Safeguards (ACRS), and others as to the adequacy of the NRC safety goals for use with the next generation of nuclear power reactors to be built in the United States. The NRC, in its safety goals policy statement, has provided general qualitative safety goals and basic quantitative health objectives (QHOs) for nuclear reactors in the United States. Risk metrics such as core damage frequency (CDF) and large early release frequency (LERF) have been used as surrogates for the QHOs. In its review of the new plant licensing policy the ACRS has looked at the safety goals, as has the NRC. A number of issues have been raised including what the Commission had in mind when it drafted the safety goals and QHOs, how risk from multiple reactors at a site should be combined for evaluation, how the combination of a new and old reactor at the same site should be evaluated, what the criteria for evaluating new reactors should be, and whether new reactors should be required to be safer than current generation reactors. As part of the development and application of the NRC safety goal policy statement the Commissioners laid out the expectations for the safety of a nuclear power plant but did not address the risk associated with current multi-unit sites, potential modular reactor sites, and hybrid sites that could contain current generation reactors, new passive reactors, and/or modular reactors. The NRC safety goals and the QHOs refer to a "nuclear power plant," but do not discuss whether a "plant" refers to only a single unit or all of the units on a site. There has been much discussion on this issue recently due to the development of modular reactors. Additionally, the risk of multiple reactor accidents on the same site has been largely ignored in the probabilistic risk assessments (PRAs) done to date, and in most risk

  7. Tolerability of risk, safety assessment principles and their implications for probabilistic safety analysis

    International Nuclear Information System (INIS)

    Ewing, D.J.F.; Campbell, J.F.

    1994-01-01

    This paper gives a regulatory view of probabilistic safety assessment as seen by the Nuclear Installations Inspectorate (NII) and in the light of the general regulatory risk aims set out in the Health and Safety Executive's (HSE) The tolerability of risk from nuclear power stations (TOR) and in Safety assessment principles for nuclear plants (SAPs), prepared by NII on behalf of the HSE. Both of these publications were revised and republished in 1992. This paper describes the SAPs, together with the historical background, the motivation for review, the effects of the Sizewell and Hinkley Point C public inquiries, changes since the original versions, comparison with international standards and use in assessment. For new plant, probabilistic safety analysis (PSA) is seen as an essential tool in balancing the safety of the design and in demonstrating compliance with TOR and the SAPs. (Author)

  8. The radiation safety self-assessment program of Ontario Hydro

    International Nuclear Information System (INIS)

    Armitage, G.; Chase, W.J.

    1987-01-01

    Ontario Hydro has developed a self-assessment program to ensure that high quality in its radiation safety program is maintained. The self-assessment program has three major components: routine ongoing assessment, accident/incident investigation, and detailed assessments of particular radiation safety subsystems or of the total radiation safety program. The operation of each of these components is described

  9. Psychometric model for safety culture assessment in nuclear research facilities

    Energy Technology Data Exchange (ETDEWEB)

    Nascimento, C.S. do, E-mail: claudio.souza@ctmsp.mar.mil.br [Centro Tecnológico da Marinha em São Paulo (CTMSP), Av. Professor Lineu Prestes 2468, 05508-000 São Paulo, SP (Brazil); Andrade, D.A., E-mail: delvonei@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN – SP), Av. Professor Lineu Prestes 2242, 05508-000 São Paulo, SP (Brazil); Mesquita, R.N. de, E-mail: rnavarro@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN – SP), Av. Professor Lineu Prestes 2242, 05508-000 São Paulo, SP (Brazil)

    2017-04-01

    Highlights: • A psychometric model to evaluate ‘safety climate’ at nuclear research facilities. • The model presented evidences of good psychometric qualities. • The model was applied to nuclear research facilities in Brazil. • Some ‘safety culture’ weaknesses were detected in the assessed organization. • A potential tool to develop safety management programs in nuclear facilities. - Abstract: A safe and reliable operation of nuclear power plants depends not only on technical performance, but also on the people and on the organization. Organizational factors have been recognized as the main causal mechanisms of accidents by research organizations through USA, Europe and Japan. Deficiencies related with these factors reveal weaknesses in the organization’s safety culture. A significant number of instruments to assess the safety culture based on psychometric models that evaluate safety climate through questionnaires, and which are based on reliability and validity evidences, have been published in health and ‘safety at work’ areas. However, there are few safety culture assessment instruments with these characteristics (reliability and validity) available on nuclear literature. Therefore, this work proposes an instrument to evaluate, with valid and reliable measures, the safety climate of nuclear research facilities. The instrument was developed based on methodological principles applied to research modeling and its psychometric properties were evaluated by a reliability analysis and validation of content, face and construct. The instrument was applied to an important nuclear research organization in Brazil. This organization comprises 4 research reactors and many nuclear laboratories. The survey results made possible a demographic characterization and the identification of some possible safety culture weaknesses and pointing out potential areas to be improved in the assessed organization. Good evidence of reliability with Cronbach's alpha

  10. Psychometric model for safety culture assessment in nuclear research facilities

    International Nuclear Information System (INIS)

    Nascimento, C.S. do; Andrade, D.A.; Mesquita, R.N. de

    2017-01-01

    Highlights: • A psychometric model to evaluate ‘safety climate’ at nuclear research facilities. • The model presented evidences of good psychometric qualities. • The model was applied to nuclear research facilities in Brazil. • Some ‘safety culture’ weaknesses were detected in the assessed organization. • A potential tool to develop safety management programs in nuclear facilities. - Abstract: A safe and reliable operation of nuclear power plants depends not only on technical performance, but also on the people and on the organization. Organizational factors have been recognized as the main causal mechanisms of accidents by research organizations through USA, Europe and Japan. Deficiencies related with these factors reveal weaknesses in the organization’s safety culture. A significant number of instruments to assess the safety culture based on psychometric models that evaluate safety climate through questionnaires, and which are based on reliability and validity evidences, have been published in health and ‘safety at work’ areas. However, there are few safety culture assessment instruments with these characteristics (reliability and validity) available on nuclear literature. Therefore, this work proposes an instrument to evaluate, with valid and reliable measures, the safety climate of nuclear research facilities. The instrument was developed based on methodological principles applied to research modeling and its psychometric properties were evaluated by a reliability analysis and validation of content, face and construct. The instrument was applied to an important nuclear research organization in Brazil. This organization comprises 4 research reactors and many nuclear laboratories. The survey results made possible a demographic characterization and the identification of some possible safety culture weaknesses and pointing out potential areas to be improved in the assessed organization. Good evidence of reliability with Cronbach's alpha

  11. Probabilistic safety assessment for seismic events

    International Nuclear Information System (INIS)

    1993-10-01

    This Technical Document on Probabilistic Safety Assessment for Seismic Events is mainly associated with the Safety Practice on Treatment of External Hazards in PSA and discusses in detail one specific external hazard, i.e. earthquakes

  12. Living probabilistic safety assessment (LPSA)

    International Nuclear Information System (INIS)

    1999-08-01

    Over the past few years many nuclear power plant organizations have performed probabilistic safety assessments (PSAs) to identify and understand key plant vulnerabilities. As a result of the availability of these PSA studies, there is a desire to use them to enhance plant safety and to operate the nuclear stations in the most efficient manner. PSA is an effective tool for this purpose as it assists plant management to target resources where the largest benefit to plant safety can be obtained. However, any PSA which is to be used in this way must have a credible and defensible basis. Thus, it is very important to have a high quality 'living PSA' accepted by the plant and the regulator. With this background in mind, the IAEA has prepared this report on Living Probabilistic Safety Assessment (LPSA) which addresses the updating, documentation, quality assurance, and management and organizational requirements for LPSA. Deficiencies in the areas addressed in this report would seriously reduce the adequacy of the LPSA as a tool to support decision making at NPPs. This report was reviewed by a working group during a Technical Committee Meeting on PSA Applications to Improve NPP Safety held in Madrid, Spain, from 23 to 27 February 1998

  13. Safety assessment and geosphere transport methodology for the geologic isolation of nuclear waste materials

    International Nuclear Information System (INIS)

    Burkholder, H.C.; Stottlemyre, J.A.; Raymond, J.R.

    1977-01-01

    As part of the National Waste Terminal Storage Program in the United States, the Waste Isolation Safety Assessment Program (WISAP) is underway to develop and demonstrate the methods and obtain the data necessary to assess the safety of geologic isolation repositories and to communicate the assessment results to the public. This paper reviews past analysis efforts, discusses the WISAP technical approach to the problem, and points out areas where work is needed

  14. Probabilistic safety assessment in nuclear power plant management

    International Nuclear Information System (INIS)

    Holloway, N.J.

    1989-06-01

    Probabilistic Safety Assessment (PSA) techniques have been widely used over the past few years to assist in understanding how engineered systems respond to abnormal conditions, particularly during a severe accident. The use of PSAs in the design and operation of such systems thus contributes to the safety of nuclear power plants. Probabilistic safety assessments can be maintained to provide a continuous up-to-date assessment (Living PSA), supporting the management of plant operations and modifications

  15. Types of safety assessments of near surface repository for radioactive waste

    International Nuclear Information System (INIS)

    Mateeva, M.

    2004-01-01

    The purpose of this article is to presents the classification of different types safety assessments of near surface repository for low and intermediate level radioactive waste substantiated with results of safety assessments generated in Bulgaria. The different approach of safety assessments applied for old existing repository as well as for site selection for construction new repository is outlined. The regulatory requirements in Bulgaria define three main types of assessments: Safety assessment; Technical substation of repository safety; Assessment of repository influence on environment that is in form of report prepared from the Ministry of environment and waters on the base of results obtained in two first types of assessments. Additionally first type is subdivided in three categories - preliminary safety assessment, safety assessment and post closure safety assessment, which are generated using deterministic approach. The technical substation of repository safety is generated using probabilistic approach. Safety assessment results that are presented here are based on evaluation of existing old repository type 'Radon' in Novi Han and real site selection procedure for new near surface repository for low and intermediate level radioactive waste from nuclear power station in Kozloduy. The important role of safety assessment for improvement the repository safety as well as for repository licensing, correct site selection and right choice of engineer barriers and repository design is discussed using generated results. (author)

  16. Application of the dynamic bounds method in the safety assessment of flood defences, a case study: 17th Street flood wall, New Orleans

    NARCIS (Netherlands)

    Rajabali Nejad, Mohammadreza; van Gelder, P.H.A.J.M.; Demirbilek, Zeki; Mahdi, Tew-Fik; Vrijling, J.K.

    2010-01-01

    In this paper we provide a computational framework for evaluation of reliability and safety assessment of infrastructures. It is based on the combined application of the dynamic bounds (DB) method and a probabilistic finite element model (FEM). The DB improves the computational efficiency of the FEM

  17. [Comparative study on four kinds of assessment methods of post-marketing safety of Danhong injection].

    Science.gov (United States)

    Li, Xuelin; Tang, Jinfa; Meng, Fei; Li, Chunxiao; Xie, Yanming

    2011-10-01

    To study the adverse reaction of Danhong injection with four kinds of methods, central monitoring method, chart review method, literature study method and spontaneous reporting method, and to compare the differences between them, explore an appropriate method to carry out post-marketing safety evaluation of traditional Chinese medicine injection. Set down the adverse reactions' questionnaire of four kinds of methods, central monitoring method, chart review method, literature study method and collect the information on adverse reactions in a certain period. Danhong injection adverse reaction information from Henan Province spontaneous reporting system was collected with spontaneous reporting method. Carry on data summary and descriptive analysis. Study the adverse reaction of Danhong injection with four methods of central monitoring method, chart review method, literature study method and spontaneous reporting method, the rates of adverse events were 0.993%, 0.336%, 0.515%, 0.067%, respectively. Cyanosis, arrhythmia, hypotension, sweating, erythema, hemorrhage dermatitis, rash, irritability, bleeding gums, toothache, tinnitus, asthma, elevated aminotransferases, constipation, pain are new discovered adverse reactions. The central monitoring method is the appropriate method to carry out post-marketing safety evaluation of traditional Chinese medicine injection, which could objectively reflect the real world of clinical usage.

  18. Data used for safety assessment of reprocessing facilities

    International Nuclear Information System (INIS)

    Nomura, Yasushi; Suzuki, Atsuyuki; Kanagawa, Akira

    1990-08-01

    For safety assessment of a reprocessing facility, it is important to know performance of radioactive materials in their accidental release and transfer. Accordingly, it is necessary to collect and prepare data for use in analyses for their performance. In JAERI, experiments such as for data acquisition, for source-term evaluation and for radioactive material transfer, are now planned to be performed. Prior to these experiments, it is decided to investigate data in use for accidental safety assessment of reprocessing plants and their based experimental data, thus to make it possible to recommend reasonable values for safety analysis parameters by evaluating the investigated results, to select the experimental items, to edit a safety assessment handbook and so on. In this line of objectives, JAERI rewarded a two-year contract of investigation to Nuclear Safety Research Association, to make a working group under a special committee on data investigation for reprocessing facility safety assessment. This report is a collection of results reviewed and checked by the working group. The contents consist of two parts, one for investigation and review of data used for safety assessment of domestic or oversea reprocessing facilities, and the other for investigation, review and evaluation of ANSI recommended American standard data reported by E. Walker together with their based experimental data resorting to the original referred reports. (author)

  19. Establishing the Appropriate Attributes in Current Human Reliability Assessment Techniques for Nuclear Safety

    International Nuclear Information System (INIS)

    Bowie, Jane; Munley, Gary; Dang, Vinh; Wreathall, John; Bye, Andreas; Cooper, Susan; Marble, Julie; Peters, Sean; Xing, Jing; Fauchille, Veronique; Fiset, Jean Yves; Haage, Monica; Johanson, Gunnar; Jung, Won Dae; Kim, Jaewhan; Lee, Seung Jung; Kubicek, Jan; Le Bot, Pierre; Pesme, Helene; Preischl, Wolfgang; Salway, Alice; Amri, Abdallah; Lamarre, Greg; White, Andrew; )

    2015-03-01

    This report presents the results of a joint task of the Working Groups on Risk Assessment (WGRISK) and on Human and Organisational Factors (WGHOF) of the OECD/NEA CSNI, to identify desirable attributes of Human Reliability Assessment (HRA) methods, and to evaluate a range of HRA methods used in OECD member countries against those attributes. The purpose of this project is to provide information that will support regulators and operators of nuclear facilities when making judgements about the appropriateness of HRA methods for conducting assessments in support of Probabilistic Safety Assessments (PSA). The task was performed by an international team of Human Factors, HRA and PSA experts from a broad range of OECD member countries. As in other reviews of HRA methods, the study did not set out to recommend or promote the use of any particular HRA method. Rather the study aims to identify the strengths and limitations of commonly used and developing methods to aid those responsible for production of HRAs in selecting appropriate tools for specific HRA applications. The study also aims to assist regulators when making judgements on the appropriateness of the application of an HRA technique within nuclear-related probabilistic safety assessments. The report is aimed at practitioners in the field of human reliability assessment, human factors, and risk assessment more generally

  20. Safety functions and safety function indicators - key elements in SKB'S methodology for assessing long-term safety of a KBS-3 repository

    International Nuclear Information System (INIS)

    Hedin, A.

    2008-01-01

    The application of so called safety function indicators in SKB safety assessment of a KBS-3 repository for spent nuclear fuel is presented. Isolation and retardation are the two main safety functions of the KBS-3 concept. In order to quantitatively evaluate safety on a sub-system level, these functions need to be differentiated, associated with quantitative measures and, where possible, with quantitative criteria relating to the fulfillment of the safety functions. A safety function is defined as a role through which a repository component contributes to safety. A safety function indicator is a measurable or calculable property of a repository component that allows quantitative evaluation of a safety function. A safety function indicator criterion is a quantitative limit such that if the criterion is fulfilled, the corresponding safety function is upheld. The safety functions and their associated indicators and criteria developed for the KBS-3 repository are primarily related to the isolating potential and to physical states of the canister and the clay buffer surrounding the canister. They are thus not directly related to release rates of radionuclides. The paper also describes how the concepts introduced i) aid in focussing the assessment on critical, safety related issues, ii) provide a framework for the accounting of safety throughout the different time frames of the assessment and iii) provide key information in the selection of scenarios for the safety assessment. (author)

  1. Safety and reliability assessment

    International Nuclear Information System (INIS)

    1979-01-01

    This report contains the papers delivered at the course on safety and reliability assessment held at the CSIR Conference Centre, Scientia, Pretoria. The following topics were discussed: safety standards; licensing; biological effects of radiation; what is a PWR; safety principles in the design of a nuclear reactor; radio-release analysis; quality assurance; the staffing, organisation and training for a nuclear power plant project; event trees, fault trees and probability; Automatic Protective Systems; sources of failure-rate data; interpretation of failure data; synthesis and reliability; quantification of human error in man-machine systems; dispersion of noxious substances through the atmosphere; criticality aspects of enrichment and recovery plants; and risk and hazard analysis. Extensive examples are given as well as case studies

  2. Risk-informed decision making a keystone in advanced safety assessment

    International Nuclear Information System (INIS)

    Reinhart, M.

    2007-01-01

    Probabilistic Safety Assessment (PSA) has provided extremely valuable complementary insight, perspective, comprehension, and balance to deterministic nuclear reactor safety assessment. This integrated approach of risk-informed management and decision making has been called Risk-Informed Decision Making (RIDM). RIDM provides enhanced safety, reliability, operational flexibility, reduced radiological exposure, and improved fiscal economy. Applications of RIDM continuously increase. Current applications are in the areas of design, construction, licensing, operations, and security. Operational phase safety applications include the following: technical specifications improvement, risk-monitors and configuration control, maintenance planning, outage planning and management, in-service inspection, inservice testing, graded quality assurance, reactor oversight and inspection, inspection finding significance determination, operational events assessment, and rulemaking. Interestingly there is a significant spectrum of approaches, methods, programs, controls, data bases, and standards. The quest of many is to assimilate the full compliment of PSA and RIDM information and to achieve a balanced international harmony. The goal is to focus the best of the best, so to speak, for the benefit of all. Accordingly, this presentation will address the principles, benefits, and applications of RIDM. It will also address some of the challenges and areas to improve. Finally it will highlight efforts by the IAEA and others to capture the international thinking, experience, successes, challenges, and lessons in RIDM. (authors)

  3. Development of Nuclear Safety Culture evaluation method for an operation team based on the probabilistic approach

    International Nuclear Information System (INIS)

    Han, Sang Min; Lee, Seung Min; Yim, Ho Bin; Seong, Poong Hyun

    2018-01-01

    Highlights: •We proposed a Probabilistic Safety Culture Healthiness Evaluation Method. •Positive relationship between the ‘success’ states of NSC and performance was shown. •The state probability profile showed a unique ratio regardless of the scenarios. •Cutset analysis provided not only root causes but also the latent causes of failures. •Pro-SCHEMe was found to be applicable to Korea NPPs. -- Abstract: The aim of this study is to propose a new quantitative evaluation method for Nuclear Safety Culture (NSC) in Nuclear Power Plant (NPP) operation teams based on the probabilistic approach. Various NSC evaluation methods have been developed, and the Korea NPP utility company has conducted the NSC assessment according to international practice. However, most of methods are conducted by interviews, observations, and the self-assessment. Consequently, the results are often qualitative, subjective, and mainly dependent on evaluator’s judgement, so the assessment results can be interpreted from different perspectives. To resolve limitations of present evaluation methods, the concept of Safety Culture Healthiness was suggested to produce quantitative results and provide faster evaluation process. This paper presents Probabilistic Safety Culture Healthiness Evaluation Method (Pro-SCHEMe) to generate quantitative inputs for Human Reliability Assessment (HRA) in Probabilistic Safety Assessment (PSA). Evaluation items which correspond to a basic event in PSA are derived in the first part of the paper through the literature survey; mostly from nuclear-related organizations such as the International Atomic Energy Agency (IAEA), the United States Nuclear Regulatory Commission (U.S.NRC), and the Institute of Nuclear Power Operations (INPO). Event trees (ETs) and fault trees (FTs) are devised to apply evaluation items to PSA based on the relationships among such items. The Modeling Guidelines are also suggested to classify and calculate NSC characteristics of

  4. Safety assessment as basis for the decision making process

    International Nuclear Information System (INIS)

    Ilie, P.; Didita, L.; Danchiv, A.

    2005-01-01

    This paper deals with the safety assessment for a new near surface repository, particularly for the early stage of repository development using ISAM (Improvement of Safety Assessment Methodologies for Near Surface Disposal Facilities) safety assessment methodology. In this stage of the repository life cycle the main purpose of the safety assessment is to demonstrate that the plant is capable to be constructed and operated safely. The paper is based on development of the ASAM (Application of the Safety Assessment Methodologies for Near-Surface Disposal Facilities) Decision Support Subgroup of the Common Aspects Working Group. The implications of decision making for the application of the ISAM methodology on post-closure safety assessment are analysed. Some important elements of the decision-making process with impact on key components of the ISAM process are described. Following the development of Decision Support Subgroup of the ASAM Common Aspects Working Group the proposed change of ISAM methodology is analysed. This approach puts all activities in a decision context where the first iteration of the safety assessment is based on the existing state of knowledge and the initial engineering design. Confidence in the process is accomplished through the direct inclusion of all decision makers and stakeholders in the formulation of decisions, the definition of the state of knowledge, and decision making activities. The decision process is developed in context of undertaking assessments with little site-specific information, this situation is specifically for new planned repository. Limited site-specific information can result in a high degree of uncertainty, therefore it is important first of all to identify the sources of uncertainty arising from the limited nature of the site-specific information and then to apply appropriate approaches to manage the uncertainties and to determine whether the uncertainties are important to the overall safety of the disposal facility

  5. Assessment of safety culture at INPP

    International Nuclear Information System (INIS)

    Lesin, S.

    2002-01-01

    Safety Culture covers all main directions of plant activities and the plant departments involved through integration into the INPP Quality Assurance System. Safety Culture is represented by three components. The first is the clear INPP Safety and Quality Assurance Policy. Based on the Policy INPP is safely operated and managers' actions firstly aim at safety assurance. The second component is based on personal responsibility for safety and attitude of each employee of the plant. The third component is based on commitment to safety and competence of managers and employees of the plant. This component links the first two to ensure efficient management of safety at the plant. The above mentioned components including the elements which may significantly affect Safety Culture are also presented in the attachment. The concept of such model implies understanding of effect of different factors on the level of Safety Culture in the organization. In order to continuously correct safety problems, self-assessment of the Safety Culture level is performed at regular intervals. (author)

  6. Numerical methods for reliability and safety assessment multiscale and multiphysics systems

    CERN Document Server

    Hami, Abdelkhalak

    2015-01-01

    This book offers unique insight on structural safety and reliability by combining computational methods that address multiphysics problems, involving multiple equations describing different physical phenomena, and multiscale problems, involving discrete sub-problems that together  describe important aspects of a system at multiple scales. The book examines a range of engineering domains and problems using dynamic analysis, nonlinear methods, error estimation, finite element analysis, and other computational techniques. This book also: ·       Introduces novel numerical methods ·       Illustrates new practical applications ·       Examines recent engineering applications ·       Presents up-to-date theoretical results ·       Offers perspective relevant to a wide audience, including teaching faculty/graduate students, researchers, and practicing engineers

  7. Assessment of radiation safety in well logging

    International Nuclear Information System (INIS)

    Alles, A.; Pérez, Y.; Duménigo, C.

    2015-01-01

    Radiation safety assessments required by current regulations are a means to verify compliance with the requirements. Different methods have been used for this purpose. In the paper the results of applying the method of risk matrices, applied for the first time in the practice of well logging are exposed. For each initiating event frequency of occurrence, the severity of its consequences and the probability of failure of the barriers identified were evaluated. Starting from these assumptions, the risk associated is determined for each of the identified accident sequences, using for this the SEVRRA code 'Risk Assessment System', originally designed for use in radiotherapy. As an result sequences increased risk associated with the practice of well logging were identified, which is the starting point for the further implementation of a coherent program of dose optimization in practice. [es

  8. Safety assessment for radioactive waste disposal facility

    International Nuclear Information System (INIS)

    Thanaletchumy Karuppiah; Mohd Abdul Wahab Yusof; Nik Marzuki Nik Ibrahim; Nurul Wahida Ahmad Khairuddin

    2008-08-01

    Safety assessments are used to evaluate the performance of a radioactive waste disposal facility and its impact on human health and the environment. This paper presents the overall information and methodology to carry out the safety assessment for a long term performance of a disposal system. A case study was also conducted to gain hands-on experience in the development and justification of scenarios, the formulation and implementation of models and the analysis of results. AMBER code using compartmental modeling approach was used to represent the migration and fate of contaminants in this training. This safety assessment is purely illustrative and it serves as a starting point for each development stage of a disposal facility. This assessment ultimately becomes more detail and specific as the facility evolves. (Author)

  9. Preliminary safety assessment of the WIPP facility

    International Nuclear Information System (INIS)

    Balestri, R.J.; Torres, B.W.; Pahwa, S.B.; Brannen, J.P.

    1979-01-01

    This paper summarizes the efforts to perform a safety assessment of the Waste Isolation Pilot Plant (WIPP) facility being proposed for southeastern New Mexico. This preliminary safety assessment is limited to a consequence assessment in terms of the dose to a maximally exposed individual as a result of introducing the radionuclides into the biosphere. The extremely low doses to the organs as a result of the liquid breach scenarios are contrasted with the background radiation

  10. Promoting and assessment of safety culture within regulatory body

    International Nuclear Information System (INIS)

    Awasthi, Sumit; Bhattacharya, D.; Koley, J.; Krishnamurthy, P.R.

    2015-01-01

    Regulators have an important role to play in assisting organizations under their jurisdiction to develop positive safety cultures. It is therefore essential for the regulator to have a robust safety culture as an inherent strategy and communication of this strategy to the organizations it supervises. Atomic Energy Regulatory Board (AERB) emphasizes every utility to institute a good safety culture during various stages of a NPP. The regulatory requirement for establishing organisational safety culture within utility at different stages are delineated in the various AERB safety codes which are presented in the paper. Although the review and assessment of the safety culture is a part of AERB’s continual safety supervision through existing review mechanism, AERB do not use any specific indicators for safety culture assessment. However, establishing and nurturing a good safety culture within AERB helps in encouraging the utility to institute the same. At the induction level AERB provides training to its staffs for regulatory orientation which include a specific course on safety culture. Subsequently, the junior staffs are mentored by seniors while involving them in various regulatory processes and putting them as observers during regulatory decision making process. Further, AERB established a formal procedure for assessing and improving safety culture within its staff as a management system process. The paper describes as a case study the above safety culture assessment process established within AERB

  11. Research on probabilistic assessment method based on the corroded pipeline assessment criteria

    International Nuclear Information System (INIS)

    Zhang Guangli; Luo, Jinheng; Zhao Xinwei; Zhang Hua; Zhang Liang; Zhang Yi

    2012-01-01

    Pipeline integrity assessments are performed using conventional deterministic approaches, even though there are many uncertainties about the parameters in the pipeline integrity assessment. In this paper, a probabilistic assessment method is provided for the gas pipeline with corrosion defects based on the current corroded pipe evaluation criteria, and the failure probability of corroded pipelines due to the uncertainties of loadings, material property and measurement accuracy is estimated using Monte-Carlo technique. Furthermore, the sensitivity analysis approach is introduced to rank the influence of various random variables to the safety of pipeline. And the method to determine the critical defect size based on acceptable failure probability is proposed. Highlights: ► The folias factor in pipeline corrosion assessment methods was analyzed. ► The probabilistic method was applied in corrosion assessment methods. ► The influence of assessment variables to the reliability of pipeline was ranked. ► The acceptable failure probability was used to determine the critical defect size.

  12. Ab initio chemical safety assessment: A workflow based on exposure considerations and non-animal methods

    OpenAIRE

    Berggren, Elisabet; White, Andrew; Ouedraogo, Gladys; Paini, Alicia; Richarz, Andrea-Nicole; Bois, Frederic Y.; Exner, Thomas; Leite, Sofia; Grunsven, Leo A. van; Worth, Andrew; Mahony, Catherine

    2017-01-01

    Highlights • A workflow for an exposure driven chemical safety assessment to avoid animal testing. • Hypothesis based on existing data, in silico modelling and biokinetic considerations. • A tool to inform targeted and toxicologically relevant in vitro testing.

  13. Test Bed for Safety Assessment of New e-Navigation Systems

    Directory of Open Access Journals (Sweden)

    Axel Hahn

    2014-12-01

    Full Text Available New e-navigation strains require new technologies, new infrastructures and new organizational structures on bridge, on shore as well as in the cloud. Suitable engineering and safety/risk assessment methods facilitate these efforts. Understanding maritime transportation as a sociotechnical system allows the application of system-engineering methods. Formal, simulation based and in situ verification and validation of e-navigation technologies are important methods to obtain system safety and reliability. The modelling and simulation toolset HAGGIS provides methods for system specification and formal risk analysis. It provides a modelling framework for processes, fault trees and generic hazard specification and a physical world and maritime traffic simulation system. HAGGIS is accompanied by the physical test bed LABSKAUS which implements a physical test bed. The test bed provides reference ports and waterways in combination with an experimental Vessel Traffic Services (VTS system and a mobile integrated bridge: This enables in situ experiments for technological evaluation, testing, ground research and demonstration. This paper describes an integrated seamless approach for developing new e-navigation technologies starting with simulation based assessment and ending in physical real world demonstrations

  14. Patient safety initiatives in Central and Eastern Europe: A mixed methods approach by the LINNEAUS collaboration on patient safety in primary care

    Science.gov (United States)

    Godycki-Cwirko, Maciek; Esmail, Aneez; Dovey, Susan; Wensing, Michel; Parker, Dianne; Kowalczyk, Anna; Błaszczyk, Honorata; Kosiek, Katarzyna

    2015-01-01

    ABSTRACT Background: Despite patient safety being recognized as an important healthcare issue in the European Union, there has been variable implementation of patient safety initiatives in Central and Eastern Europe (CEE). Objective: To assess the status of patient safety initiatives in countries in CEE; to describe a process of engagement in Poland, which can serve as a template for the implementation of patient safety initiatives in primary care. Methods: A mixed methods design was used. We conducted a review of literature focusing on publications from CEE, an inventory of patient safety initiatives in CEE countries, interviews with key informants, international survey, review of national reporting systems, and pilot demonstrator project in Poland with implementation of patient safety toolkits assessment. Results: There was no published patient safety research from Albania, Belarus, Greece, Latvia, Lithuania, Romania, or Russia. Nine papers were found from Bulgaria, Croatia, the Czech Republic, Poland, Serbia, and Slovenia. In most of the CEE countries, patient safety had been addressed at the policy level although the focus was mainly in hospital care. There was a dearth of activity in primary care. The use of patient improvement strategies was low. Conclusion: International cooperation as exemplified in the demonstrator project can help in the development and implementation of patient safety initiatives in primary care in changing the emphasis away from a blame culture to one where greater emphasis is placed on improvement and learning. PMID:26339839

  15. Self-assessment of operational safety for nuclear power plants

    International Nuclear Information System (INIS)

    1999-12-01

    Self-assessment processes have been continuously developed by nuclear organizations, including nuclear power plants. Currently, the nuclear industry and governmental organizations are showing an increasing interest in the implementation of this process as an effective way for improving safety performance. Self-assessment involves the use of different types of tools and mechanisms to assist the organizations in assessing their own safety performance against given standards. This helps to enhance the understanding of the need for improvements, the feeling of ownership in achieving them and the safety culture as a whole. Although the primary beneficiaries of the self-assessment process are the plant and operating organization, the results of the self-assessments are also used, for example, to increase the confidence of the regulator in the safe operation of an installation, and could be used to assist in meeting obligations under the Convention on Nuclear Safety. Such considerations influence the form of assessment, as well as the type and detail of the results. The concepts developed in this report present the basic approach to self-assessment, taking into consideration experience gained during Operational Safety Review Team (OSART) missions, from organizations and utilities which have successfully implemented parts of a self-assessment programme and from meetings organized to discuss the subject. This report will be used in IAEA sponsored workshops and seminars on operational safety that include the topic of self-assessment

  16. Effects of a team-based assessment and intervention on patient safety culture in general practice

    DEFF Research Database (Denmark)

    Hoffmann, B; Müller, V; Rochon, J

    2014-01-01

    Background: The measurement of safety culture in healthcare is generally regarded as a first step towards improvement. Based on a self-assessment of safety culture, the Frankfurt Patient Safety Matrix (FraTrix) aims to enable healthcare teams to improve safety culture in their organisations....... In this study we assessed the effects of FraTrix on safety culture in general practice. Methods: We conducted an open randomised controlled trial in 60 general practices. FraTrix was applied over a period of 9 months during three facilitated team sessions in intervention practices. At baseline and after 12...... months, scores were allocated for safety culture as expressed in practice structure and processes (indicators), in safety climate and in patient safety incident reporting. The primary outcome was the indicator error management. Results: During the team sessions, practice teams reflected on their safety...

  17. Development of an Evaluation Method for Team Safety Culture Competencies using Social Network Analysis

    International Nuclear Information System (INIS)

    Han, Sang Min; Kim, Ar Ryum; Seong, Poong Hyun

    2016-01-01

    In this study, team safety culture competency of a team was estimated through SNA, as a team safety culture index. To overcome the limit of existing safety culture evaluation methods, the concept of competency and SNA were adopted. To estimate team safety culture competency, we defined the definition, range and goal of team safety culture competencies. Derivation of core team safety culture competencies is performed and its behavioral characteristics were derived for each safety culture competency, from the procedures used in NPPs and existing criteria to assess safety culture. Then observation was chosen as a method to provide the input data for the SNA matrix of team members versus insufficient team safety culture competencies. Then through matrix operation, the matrix was converted into the two meaningful values, which are density of team members and degree centralities of each team safety culture competency. Density of tem members and degree centrality of each team safety culture competency represent the team safety culture index and the priority of team safety culture competency to be improved

  18. Development of an Evaluation Method for Team Safety Culture Competencies using Social Network Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sang Min; Kim, Ar Ryum; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of)

    2016-05-15

    In this study, team safety culture competency of a team was estimated through SNA, as a team safety culture index. To overcome the limit of existing safety culture evaluation methods, the concept of competency and SNA were adopted. To estimate team safety culture competency, we defined the definition, range and goal of team safety culture competencies. Derivation of core team safety culture competencies is performed and its behavioral characteristics were derived for each safety culture competency, from the procedures used in NPPs and existing criteria to assess safety culture. Then observation was chosen as a method to provide the input data for the SNA matrix of team members versus insufficient team safety culture competencies. Then through matrix operation, the matrix was converted into the two meaningful values, which are density of team members and degree centralities of each team safety culture competency. Density of tem members and degree centrality of each team safety culture competency represent the team safety culture index and the priority of team safety culture competency to be improved.

  19. Aligning the 3Rs with new paradigms in the safety assessment of chemicals.

    Science.gov (United States)

    Burden, Natalie; Mahony, Catherine; Müller, Boris P; Terry, Claire; Westmoreland, Carl; Kimber, Ian

    2015-04-01

    There are currently several factors driving a move away from the reliance on in vivo toxicity testing for the purposes of chemical safety assessment. Progress has started to be made in the development and validation of non-animal methods. However, recent advances in the biosciences provide exciting opportunities to accelerate this process and to ensure that the alternative paradigms for hazard identification and risk assessment deliver lasting 3Rs benefits, whilst improving the quality and relevance of safety assessment. The NC3Rs, a UK-based scientific organisation which supports the development and application of novel 3Rs techniques and approaches, held a workshop recently which brought together over 20 international experts in the field of chemical safety assessment. The aim of this workshop was to review the current scientific, technical and regulatory landscapes, and to identify key opportunities towards reaching these goals. Here, we consider areas where further strategic investment will need to be focused if significant impact on 3Rs is to be matched with improved safety science, and why the timing is right for the field to work together towards an environment where we no longer rely on whole animal data for the accurate safety assessment of chemicals.

  20. Risk assessment of safety violations for coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Megan Orsulaka; Vladislav Kecojevicb; Larry Graysona; Antonio Nietoa [Pennsylvania State University, University Park, PA (United States). Dept of Energy and Mineral Engineering

    2010-09-15

    This article presents an application of a risk assessment approach in characterising the risks associated with safety violations in underground bituminous mines in Pennsylvania using the Mine Safety and Health Administration (MSHA) citation database. The MSHA database on citations provides an opportunity to assess risks in mines through scrutiny of violations of mandatory safety standards. In this study, quantitative risk assessment is performed, which allows determination of the frequency of occurrence of safety violations (through associated citations) as well as the consequences of them in terms of penalty assessments. Focus is on establishing risk matrices on citation experiences of mines, which can give early indication of emerging potentially serious problems. The resulting frequency, consequence and risk rankings present valuable tools for prioritising resource allocations, determining control strategies, and could potentially contribute to more proactive prevention of incidents and injuries.

  1. Safety assessment of research reactors and preparation of the safety analysis report

    International Nuclear Information System (INIS)

    1994-01-01

    This Safety Guide presents guidelines, approved by international consensus, for the preparation, review and assessment of safety documentation for research reactors such as the Safety Analysis Report. While the Guide is most applicable to research reactors in the design and construction stage, it is also recommended for use during relicensing or reassessment of existing reactors

  2. Risk assessment of computer-controlled safety systems for fusion reactors

    International Nuclear Information System (INIS)

    Fryer, M.O.; Bruske, S.Z.

    1983-01-01

    The complexity of fusion reactor systems and the need to display, analyze, and react promptly to large amounts of information during reactor operation will require a number of safety systems in the fusion facilities to be computer controlled. Computer software, therefore, must be included in the reactor safety analyses. Unfortunately, the science of integrating computer software into safety analyses is in its infancy. Combined plant hardware and computer software systems are often treated by making simple assumptions about software performance. This method is not acceptable for assessing risks in the complex fusion systems, and a new technique for risk assessment of combined plant hardware and computer software systems has been developed. This technique is an extension of the traditional fault tree analysis and uses structured flow charts of the software in a manner analogous to wiring or piping diagrams of hardware. The software logic determines the form of much of the fault trees

  3. Safety Assessment of Polyether Lanolins as Used in Cosmetics.

    Science.gov (United States)

    Becker, Lillian C; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan; Heldreth, Bart

    The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) assessed the safety of 39 polyether lanolin ingredients as used in cosmetics. These ingredients function mostly as hair conditioning agents, skin conditioning agent-emollients, and surfactant-emulsifying agents. The Panel reviewed available animal and clinical data, from previous CIR safety assessments of related ingredients and components. The similar structure, properties, functions, and uses of these ingredients enabled grouping them and using the available toxicological data to assess the safety of the entire group. The Panel concluded that these polyether lanolin ingredients are safe in the practices of use and concentration as given in this safety assessment.

  4. Probabilistic safety assessment as a standpoint for decision making

    International Nuclear Information System (INIS)

    Cepin, M.

    2001-01-01

    This paper focuses on the role of probabilistic safety assessment in decision-making. The prerequisites for use of the results of probabilistic safety assessment and the criteria for the decision-making based on probabilistic safety assessment are discussed. The decision-making process is described. It provides a risk evaluation of impact of the issue under investigation. Selected examples are discussed, which highlight the described process. (authors)

  5. The Safety Assessment Framework Tool (SAFRAN) - Description, Overview and Applicability

    International Nuclear Information System (INIS)

    Alujevic, Luka

    2014-01-01

    The SAFRAN tool (Safety Assessment Framework) is a user-friendly software application that incorporates the methodologies developed in the SADRWMS (Safety Assessment Driven Radioactive Waste Management Solutions) project. The International Atomic Energy Agency (IAEA) organized the International Project on Safety Assessment Driving Radioactive Waste Management Solutions (SADRWMS) to examine international approaches to safety assessment for predisposal management of all types of radioactive waste, including disused sources, small volumes, legacy and decommissioning waste, operational waste, and large volume naturally occurring radioactive material residues. SAFRAN provides aid in: Describing the predisposal RW management activities in a systematic way, Conducting the SA (safety assessment) with clear documentation of the methodology, assumptions, input data and models, Establishing a traceable and transparent record of the safety basis for decisions on the proposed RW management solutions, Demonstrating clear consideration of and compliance with national and international safety standards and recommendations. The SAFRAN tool allows the user to visibly, systematically and logically address predisposal radioactive waste management and decommissioning challenges in a structured way. It also records the decisions taken in such a way that it constitutes a justifiable safety assessment of the proposed management solutions. The objective of this paper is to describe the SAFRAN architecture and features, properly define the terms safety case and safety assessment, and to predict the future development of the SAFRAN tool and assess its applicability to the construction of a future LILW (Low and Intermediate Level Waste) storage facility and repository in Croatia, taking into account all the capabilities and modelling features of the SAFRAN tool. (author)

  6. Safety factors for neutron fluences in NPP safety assessment

    International Nuclear Information System (INIS)

    Demekhin, V.L.; Bukanov, V.N.; Il'kovich, V.V.; Pugach, A.M.

    2016-01-01

    In accordance with global practice and a number of existing regulations, the use of conservative approach is required for the calculations related to nuclear safety assessment of NPP. It implies the need to consider the determination of neutron fluence errors that is rather complicated. It is proposed to carry out the consideration by the way of multiplying the neutron fluences obtained with transport calculations by safety factors. The safety factor values are calculated by the developed technique based on the theory of errors, features of the neutron transport calculation code and the results obtained with the code. It is shown that the safety factor value is equal 1.18 with the confidence level of not less than 0.95 for the majority of VVER-1000 reactor places where neutron fluences are determined by MCPV code, and its maximum value is 1.25

  7. Waste isolation safety assessment program. Summary of FY-77 progress

    International Nuclear Information System (INIS)

    Burkholder, H.C.; Greenborg, J.; Stottlemyre, J.A.; Bradley, D.J.; Raymond, J.R.; Serne, R.J.

    1977-11-01

    Objective is to provide long-term safety information for the National Waste Terminal Storage Program. Work in FY 77 supported the development of the generic assessment method (release scenario analysis, release consequence analysis) and of the generic data base (waste form release rate data, radionuclide geochemical interaction data)

  8. Ensuring the quality of occupational safety risk assessment.

    Science.gov (United States)

    Pinto, Abel; Ribeiro, Rita A; Nunes, Isabel L

    2013-03-01

    In work environments, the main aim of occupational safety risk assessment (OSRA) is to improve the safety level of an installation or site by either preventing accidents and injuries or minimizing their consequences. To this end, it is of paramount importance to identify all sources of hazards and assess their potential to cause problems in the respective context. If the OSRA process is inadequate and/or not applied effectively, it results in an ineffective safety prevention program and inefficient use of resources. An appropriate OSRA is an essential component of the occupational safety risk management process in industries. In this article, we performed a survey to elicit the relative importance for identified OSRA tasks to enable an in-depth evaluation of the quality of risk assessments related to occupational safety aspects on industrial sites. The survey involved defining a questionnaire with the most important elements (tasks) for OSRA quality assessment, which was then presented to safety experts in the mining, electrical power production, transportation, and petrochemical industries. With this work, we expect to contribute to the main question of OSRA in industries: "What constitutes a good occupational safety risk assessment?" The results obtained from the questionnaire showed that experts agree with the proposed OSRA process decomposition in steps and tasks (taxonomy) and also with the importance of assigning weights to obtain knowledge about OSRA task relevance. The knowledge gained will enable us, in the near future, to build a framework to evaluate OSRA quality for industrial sites. © 2012 Society for Risk Analysis.

  9. Safety assessment in plant layout design using indexing approach: Implementing inherent safety perspective

    International Nuclear Information System (INIS)

    Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

    2008-01-01

    The design of layout plans requires adequate assessment tools for the quantification of safety performance. The general focus of the present work is to introduce an inherent safety perspective at different points of the layout design process. In particular, index approaches for safety assessment and decision-making in the early stages of layout design are developed and discussed in this two-part contribution. Part 1 (accompanying paper) of the current work presents an integrated index approach for safety assessment of early plant layout. In the present paper (Part 2), an index for evaluation of the hazard related to the potential of domino effects is developed. The index considers the actual consequences of possible escalation scenarios and scores or ranks the subsequent accident propagation potential. The effects of inherent and passive protection measures are also assessed. The result is a rapid quantification of domino hazard potential that can provide substantial support for choices in the early stages of layout design. Additionally, a case study concerning selection among various layout options is presented and analyzed. The case study demonstrates the use and applicability of the indices developed in both parts of the current work and highlights the value of introducing inherent safety features early in layout design

  10. A new method for the assessment of patient safety competencies during a medical school clerkship using an objective structured clinical examination

    Directory of Open Access Journals (Sweden)

    Renata Mahfuz Daud-Gallotti

    2011-01-01

    Full Text Available INTRODUCTION: Patient safety is seldom assessed using objective evaluations during undergraduate medical education. OBJECTIVE: To evaluate the performance of fifth-year medical students using an objective structured clinical examination focused on patient safety after implementation of an interactive program based on adverse events recognition and disclosure. METHODS: In 2007, a patient safety program was implemented in the internal medicine clerkship of our hospital. The program focused on human error theory, epidemiology of incidents, adverse events, and disclosure. Upon completion of the program, students completed an objective structured clinical examination with five stations and standardized patients. One station focused on patient safety issues, including medical error recognition/disclosure, the patient-physician relationship and humanism issues. A standardized checklist was completed by each standardized patient to assess the performance of each student. The student's global performance at each station and performance in the domains of medical error, the patient-physician relationship and humanism were determined. The correlations between the student performances in these three domains were calculated. RESULTS: A total of 95 students participated in the objective structured clinical examination. The mean global score at the patient safety station was 87.59 ± 1.24 points. Students' performance in the medical error domain was significantly lower than their performance on patient-physician relationship and humanistic issues. Less than 60% of students (n = 54 offered the simulated patient an apology after a medical error occurred. A significant correlation was found between scores obtained in the medical error domains and scores related to both the patient-physician relationship and humanistic domains. CONCLUSIONS: An objective structured clinical examination is a useful tool to evaluate patient safety competencies during the medical

  11. Exploiting data from safety investigations and processes to assess performance of safety management aspects

    NARCIS (Netherlands)

    Karanikas, Nektarios

    2016-01-01

    This paper presents an alternative way to use records from safety investigations as a means to support the evaluation of safety management (SM) aspects. Datasets from safety investigation reports and progress records of an aviation organization were analyzed with the scope of assessing safety

  12. Assessment of safety culture in the Iranian nuclear installations

    International Nuclear Information System (INIS)

    Farahani, H.F.; Davilu, H.; Sepanloo, K.

    2005-01-01

    The deficient safety culture (S.C) is the center of safety issues of nuclear industry. To benefit from the advantages of nuclear technology and considering the fact of potential hazards of accidents in nuclear installations it is essential to view safety as the highest priority. S.C is an amalgamation of values, standards, morals and norms of acceptable behavior. Organizations having effective S.C show constant commitment to safety as a top level priority. Furthermore, the personnel of a nuclear facility shall recognize the safety significance of their tasks. Many people even those who work in the field of safety do not have a correct understanding of what S.C looks like in practical sense. In this study, by conducting a survey according to IAEA-TECDOC-1329 in some nuclear facilities, the S.C within the Iranian nuclear facilities is assessed. The human and organizational factors in Tehran Research Reactor are evaluated using a questionnaire method with active participation of the reactor operators. The results sho w that the operators are pretty aware of the subject. Also it has been identified some areas of improvement. (authors)

  13. Towards understanding work-as-done in air traffic management safety assessment and design

    International Nuclear Information System (INIS)

    Woltjer, Rogier; Pinska-Chauvin, Ella; Laursen, Tom; Josefsson, Billy

    2015-01-01

    This paper describes the approach taken and the results to develop guidance, to include Resilience Engineering principles in methodology for safety assessment of functional changes, in Air Traffic Management (ATM). It summarizes the process of deriving resilience principles for ATM, originating from Resilience Engineering concepts and transposed into ATM operations. These principles are the foundation for guidance material incorporating Resilience Engineering (RE) concepts into safety assessment methodology. The guidance material provides a method using workshops generating qualitative descriptions of RE principles applied to ATM services of everyday work, as done currently and as envisioned after introduction of a new technology or way of working. The guidance material has been proposed as part of the safety assessment methodology of SESAR (Single European Sky ATM Research), and as stand-alone guidance for ATM design processes. The methodology was validated via a test case on the i4D/CTA (Controlled Time of Arrival) concept. Operational examples from the application of the developed guidance to the i4D/CTA concept are provided. Initial evaluation of the guidance suggests that the methodology (1) provides a narrative, vocabulary and documentation means of project discussions on resilience; (2) brings the discussions of safety and resilience closer to operational practice; (3) facilitates a broader systemic and integrative perspective on operational, management, business, safety, environmental, and human performance aspects; and (4) can extend the vocabulary of safety assessment to include the description of emergent properties, to better support functional changes in ATM. - Highlights: • Guidance material for safety assessment based on systemic thinking is proposed. • It operationalizes Resilience Engineering principles in Air Traffic Management, including a case study. • It enables description of expected changes in work-as-done when introducing a new

  14. Safety assessment of a lithium target

    International Nuclear Information System (INIS)

    Burgazzi, Luciano; Roberta, Ferri; Barbara, Giannone

    2006-01-01

    This paper addresses the safety assessment of the lithium target of the International Fusion Materials Irradiation Facility (IFMIF) through evaluating the most important risk factors related to system operation and verifying the fulfillment of the safety criteria. The hazard assessment is based on using a well-structured Failure Mode and Effect Analysis (FMEA) procedure by detailing on a component-by-component basis all the possible failure modes and identifying their effects on the plant. Additionally, a systems analysis, applying the fault tree technique, is performed in order to evaluate, from a probabilistic standpoint, all the relevant and possible failures of each component required for safe system operation and assessing the unavailability of the lithium target system. The last task includes the thermal-hydraulic transient analysis of the target lithium loop, including operational and accident transients. A lithium target loop model is developed, using the RELAP5/Mod3.2 thermal-hydraulic code, which has been modified to include specific features of IFMIF itself. The main conclusions are that target safety is fulfilled, the hazards associated with lithium operation are confined within the IFMIF security boundaries, the environmental impact is negligible, and the plant responds to the simulated transients by being able to reach steady conditions in a safety situation

  15. Environment, safety and health progress assessment manual

    International Nuclear Information System (INIS)

    1992-12-01

    On June 27, 1989, the Secretary of Energy announced a 1O-Point Initiative to strengthen environment,safety, and health (ES ampersand H) programs, and waste management activities at involved conducting DOE production, research, and testing facilities. One of the points independent Tiger Team Assessments of DOE operating facilities. The Office of Special Projects (OSP), EH-5, in the Office of the Assistant Secretary for Environment, Safety and Health, EH-1, was assigned the responsibility to conduct the Tiger Team Assessments. Through June 1992, a total of 35 Tiger Team Assessments were completed. The Secretary directed that Corrective Action Plans be developed and implemented to address the concerns identified by the Tiger Teams. In March 1991, the Secretary approved a plan for assessments that are ''more focused, concentrating on ES ampersand H management, ES ampersand H corrective actions, self-assessment programs, and root-cause related issues.'' In July 1991, the Secretary approved the initiation of ES ampersand H Progress Assessments, as a followup to the Tiger Team Assessments, and in the continuing effort to institutionalize the self-assessment process and line management accountability in the ES ampersand H areas. This volume contains appendices to the Environment, Safety and Health Progress Assessment Manual

  16. The role of natural analogues in safety assessment and acceptability

    International Nuclear Information System (INIS)

    Papp, Toenis

    1987-01-01

    The safety assessment must evaluate the level of safety for a repository, the confidence that can be placed on the assessment and how well the repository can meet the acceptance criteria of the society. Many of the processes and phenomena that govern the long term performance of a deep geologic repository for radioactive waste also take place in nature. To investigate these natural analogues and try to validate the models on which the safety assessment are based is a main task in the effort to build of confidence in the safety assessments. The assessment of the safety of a repository can, however, not only be based on good models. The possible role of natural analogues or natural evidence in other parts of the safety assessment is discussed. Specially with regard to - the need to demonstrate that all relevant processes have been taken into account, and that the important ones have been validated to an acceptable level for relevant parameters spans, -the definition and analysis of external scenarios for the safety assessment and for the claim that all reasonable scenarios have been addressed, - the public confidence in the long-term relevance of the acceptance criteria. (author)

  17. Safety assessment of HLW geological disposal system

    International Nuclear Information System (INIS)

    Naito, Morimasa

    2006-01-01

    In accordance with the Japanese nuclear program, the liquid waste with a high level of radioactivity arising from reprocessing is solidified in a stable glass matrix (vitrification) in stainless steel fabrication containers. The vitrified waste is referred to as high-level radioactive waste (HLW), and is characterized by very high initial radioactivity which, even though it decreases with time, presents a potential long-term risk. It is therefore necessary to thoroughly manage HLW from human and his environment. After vitrification, HLW is stored for a period of 30 to 50 years to allow cooling, and finally disposed of in a stable geological environment at depths greater than 300 m below surface. The deep underground environment, in general, is considered to be stable over geological timescales compared with surface environment. By selecting an appropriate disposal site, therefore, it is considered to be feasible to isolate the waste in the repository from man and his environment until such time as radioactivity levels have decayed to insignificance. The concept of geological disposal in Japan is similar to that in other countries, being based on a multibarrier system which combines the natural geological environment with engineered barriers. It should be noted that geological disposal concept is based on a passive safety system that does not require any institutional control for assuring long term environmental safety. To demonstrate feasibility of safe HLW repository concept in Japan, following technical steps are essential. Selection of a geological environment which is sufficiently stable for disposal (site selection). Design and installation of the engineered barrier system in a stable geological environment (engineering measures). Confirmation of the safety of the constructed geological disposal system (safety assessment). For site selection, particular consideration is given to the long-term stability of the geological environment taking into account the fact

  18. Interim main report of the safety assessment SR-Can

    Energy Technology Data Exchange (ETDEWEB)

    Hedin, Allan [and others

    2004-08-01

    This document is an interim report on the safety assessment SR-Can (SR in the acronym stands for Safety Report and Can is short for canister). The final SR-Can report will support SKB's application to build an Encapsulation plant for spent nuclear fuel and is to be produced in 2006. The purpose of the present interim report is to demonstrate the methodology for safety assessment so that it can be reviewed before it is used in a license application. The assessment relates to the KBS-3 disposal concept in which copper canisters with a cast iron insert containing spent nuclear fuel are surrounded by bentonite clay and deposited at approximately 500 m depth in saturated, granitic rock. Preliminary data from the Forsmark site, presently being investigated by SKB as one of the candidate for a KBS-3 repository are used to some extent as examples. However, the collected data are yet too sparse to allow an evaluation of safety for this site. An important aim of this report is to demonstrate the proper handling of requirements on the safety assessment in applicable regulations. Therefore, regulations issued by the Swedish Nuclear Power Inspectorate and the Swedish Radiation Protection Authority are duplicated in an Appendix. The principal acceptance criterion requires that 'the annual risk of harmful effects after closure does not exceed 10{sup -6} for a representative individual in the group exposed to the greatest risk'. 'Harmful effects' refer to cancer and hereditary effects. Following the introductory chapter 1, this report outlines the methodology for the SR-Can assessment in chapter 2, and presents in chapters 3, 4 and 5 the initial state of the system and the plans and methods for handling external influences and internal processes, respectively. Function indicators are introduced in chapter 6 and a preliminary evaluation of these is given in chapter 7. The material presented in the first seven chapters is utilised in the scenario selection in chapter 8

  19. Interim main report of the safety assessment SR-Can

    International Nuclear Information System (INIS)

    Hedin, Allan

    2004-08-01

    This document is an interim report on the safety assessment SR-Can (SR in the acronym stands for Safety Report and Can is short for canister). The final SR-Can report will support SKB's application to build an Encapsulation plant for spent nuclear fuel and is to be produced in 2006. The purpose of the present interim report is to demonstrate the methodology for safety assessment so that it can be reviewed before it is used in a license application. The assessment relates to the KBS-3 disposal concept in which copper canisters with a cast iron insert containing spent nuclear fuel are surrounded by bentonite clay and deposited at approximately 500 m depth in saturated, granitic rock. Preliminary data from the Forsmark site, presently being investigated by SKB as one of the candidate for a KBS-3 repository are used to some extent as examples. However, the collected data are yet too sparse to allow an evaluation of safety for this site. An important aim of this report is to demonstrate the proper handling of requirements on the safety assessment in applicable regulations. Therefore, regulations issued by the Swedish Nuclear Power Inspectorate and the Swedish Radiation Protection Authority are duplicated in an Appendix. The principal acceptance criterion requires that 'the annual risk of harmful effects after closure does not exceed 10 -6 for a representative individual in the group exposed to the greatest risk'. 'Harmful effects' refer to cancer and hereditary effects. Following the introductory chapter 1, this report outlines the methodology for the SR-Can assessment in chapter 2, and presents in chapters 3, 4 and 5 the initial state of the system and the plans and methods for handling external influences and internal processes, respectively. Function indicators are introduced in chapter 6 and a preliminary evaluation of these is given in chapter 7. The material presented in the first seven chapters is utilised in the scenario selection in chapter 8. Hydrogeological

  20. Environmental Restoration Disposal Facility (Project W-296) Safety Assessment

    International Nuclear Information System (INIS)

    Armstrong, D.L.

    1994-08-01

    This Safety Assessment is based on information derived from the Conceptual Design Report for the Environmental Restoration Disposal Facility (DOE/RL 1994) and ancillary documentation developed during the conceptual design phase of Project W-296. The Safety Assessment has been prepared to support the Solid Waste Burial Ground Interim Safety Basis document. The purpose of the Safety Assessment is to provide an evaluation of the design to determine if the process, as proposed, will comply with US Department of Energy (DOE) Limits for radioactive and hazardous material exposures and be acceptable from an overall health and safety standpoint. The evaluation considered affects on the worker, onsite personnel, the public, and the environment

  1. Environmental Restoration Disposal Facility (Project W-296) Safety Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, D.L.

    1994-08-01

    This Safety Assessment is based on information derived from the Conceptual Design Report for the Environmental Restoration Disposal Facility (DOE/RL 1994) and ancillary documentation developed during the conceptual design phase of Project W-296. The Safety Assessment has been prepared to support the Solid Waste Burial Ground Interim Safety Basis document. The purpose of the Safety Assessment is to provide an evaluation of the design to determine if the process, as proposed, will comply with US Department of Energy (DOE) Limits for radioactive and hazardous material exposures and be acceptable from an overall health and safety standpoint. The evaluation considered affects on the worker, onsite personnel, the public, and the environment.

  2. HSE assessment of explosion risk analysis in offshore safety cases

    Energy Technology Data Exchange (ETDEWEB)

    Brighton, P.W.M.; Fearnley, P.J.; Brearley, I.G. [Health and Safety Executive, Bootle (United Kingdom). Offshore Safety Div.

    1995-12-31

    In the past two years HSE has assessed around 250 Safety Cases for offshore oil and gas installations, building up a unique overview of the current state of the art on fire and explosion risk assessment. This paper reviews the explosion risk methods employed, focusing on the aspects causing most difficulty for assessment and acceptance of Safety Cases. Prediction of overpressures in offshore explosions has been intensively researched in recent years but the justification of the means of prevention, control and mitigation of explosions often depends on much additional analysis of the frequency and damage potential of explosions. This involves a number of factors, the five usually considered being: leak sizes; gas dispersion; ignition probabilities; the frequency distribution of explosion strength; and the prediction of explosion damage. Sources of major uncertainty in these factors and their implications for practical risk management decisions are discussed. (author)

  3. RSAS: a Reactor Safety Assessment System

    International Nuclear Information System (INIS)

    Sebo, D.E.; Dixon, B.W.; Bray, M.A.

    1985-01-01

    The Reactor Safety Assessment System (RSAS) is an expert system under development for the United States Nuclear Regulatory Commission (NRC). RSAS is being developed for use at the NRC's Operations Center in the event of a serious incident at a licensed nuclear power plant. The system generates situation assessments for the NRC Reactor Safety Team based on a limited number of plant parameters, known operator actions, and plant status data. The RSAS rule base currently covers one reactor type. The extension of the rule base to other reactor types is also discussed

  4. A safety culture assessment by mixed methods at a public maternity and infant hospital in China

    OpenAIRE

    Listyowardojo, Tita Alissa; Yan, Xiaoling; Leyshon, Stephen; Ray-Sannerud, Bobbie; Yu, Xin Yan; Zheng, Kai; Duan, Tao

    2017-01-01

    Tita Alissa Listyowardojo,1 Xiaoling Yan,2,3 Stephen Leyshon,1 Bobbie Ray-Sannerud,1 Xin Yan Yu,4 Kai Zheng,4 Tao Duan2,3 1Life Sciences Program, Group Technology and Research, DNV GL, Hovik, Norway; 2Quality and Safety Department, Shanghai First Maternity and Infant Hospital, 3Tongji University School of Medicine, Shanghai, 4Healthcare Department, Business Assurance, DNV GL, Beijing, China Objective: To assess safety culture at a public maternity hospital in Shanghai, China, using a sequenti...

  5. Fragility assessment method of Concrete Wall Subjected to Impact Loading

    International Nuclear Information System (INIS)

    Hahm, Daegi; Shin, Sang Shup; Choi, In-Kil

    2014-01-01

    These studies have been aimed to verify and ensure the safety of the targeted walls and structures especially in the viewpoint of the deterministic approach. However, recently, the regulation and the assessment of the safety of the nuclear power plants (NPPs) against to an aircraft impact are strongly encouraged to adopt a probabilistic approach, i.e., the probabilistic risk assessment of an aircraft impact. In Korea, research to develop aircraft impact risk quantification technology was initiated in 2012 by Korea Atomic Energy Research Institute (KAERI). In this paper, for the one example of the probabilistic safety assessment approach, a method to estimate the failure probability and fragility of concrete wall subjected to impact loading caused by missiles or engine parts of aircrafts will be introduced. This method and the corresponding results will be used for the total technical roadmap and the procedure to assess the aircraft impact risk (Fig.1). A method and corresponding results of the estimation of the failure probability and fragility for a concrete wall subjected to impact loadings caused by missiles or engine parts of aircrafts was introduced. The detailed information of the target concrete wall in NPP, and the example aircraft engine model is considered safeguard information (SGI), and is not contained in this paper

  6. Study on quantification method based on Monte Carlo sampling for multiunit probabilistic safety assessment models

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Kye Min [KHNP Central Research Institute, Daejeon (Korea, Republic of); Han, Sang Hoon; Park, Jin Hee; Lim, Ho Gon; Yang, Joon Yang [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Heo, Gyun Young [Kyung Hee University, Yongin (Korea, Republic of)

    2017-06-15

    In Korea, many nuclear power plants operate at a single site based on geographical characteristics, but the population density near the sites is higher than that in other countries. Thus, multiunit accidents are a more important consideration than in other countries and should be addressed appropriately. Currently, there are many issues related to a multiunit probabilistic safety assessment (PSA). One of them is the quantification of a multiunit PSA model. A traditional PSA uses a Boolean manipulation of the fault tree in terms of the minimal cut set. However, such methods have some limitations when rare event approximations cannot be used effectively or a very small truncation limit should be applied to identify accident sequence combinations for a multiunit site. In particular, it is well known that seismic risk in terms of core damage frequency can be overestimated because there are many events that have a high failure probability. In this study, we propose a quantification method based on a Monte Carlo approach for a multiunit PSA model. This method can consider all possible accident sequence combinations in a multiunit site and calculate a more exact value for events that have a high failure probability. An example model for six identical units at a site was also developed and quantified to confirm the applicability of the proposed method.

  7. Derivation methods for clearance levels and safety assessments for very low-level radioactive waste disposal

    International Nuclear Information System (INIS)

    Okoshi, Minoru

    2001-01-01

    The clearance level was evaluated by the dose of concrete and metal when they would be recycled and reused from shallow land burial of radioactive facilities. The state of waste after clearance is not specified, so that we studied large scale of exposure pathways. The parameter values used for safety assessment were determined as the average values under the consideration of natural and social environment in Japan. Propriety of these values was confirmed by a probability analysis. On the safety assessment of very low-level waste disposal facility, the disposer pathway and parameters were determined under the consideration of special site conditions (natural and social environment) and properties of waste. However, the same exposure pathway of them used the same model for external (exposure by sky shine' s ray) and internal exposure. The calculation results of estimated pathway showed 1.2x10 -5 mSv/y the largest dose for the external exposure pathway by sky shine's ray. (S.Y.)

  8. Probabilistic Assessment of the Design and Safety of HSLA-100 Steel Confinement Vessels

    Energy Technology Data Exchange (ETDEWEB)

    R.M. Dolin

    2003-03-03

    This probabilistic approach for assessing the design and safety of the HSLA-100 steel confinement vessel used for a DynEx test involved the probability of failure for several scenarios, in which a fragment may penetrate the vessel. The samples involve vessel thicknesses of 1 inch, 2 inches, and 5.25 inches--the combined thicknesses of the 2 inch containment vessel and the 3.25 inch safety vessel. Two simulation approaches were used for each scenario to assess the probability of failure. The Likelihood of Occurrence method simultaneously models all likely fragment events of a test, for which the net probability of failure is the sum of all the fragment events. The Stochastic Sampling method determines the probability of a fragment perforation on the basis of a logical model and takes the overall probability that an experiment results in failure as the maximum probability for any fragment event. With margin and safety assessments taken into account, it was concluded that the one and two inch thicknesses by themselves are inadequate for containing a DynEx test. The 5.25 inch thickness was determined to be safe by the Likelihood of Occurrence method and nearly adequate by the Stochastic Sampling simulation.

  9. Guidelines for Self-assessment of Research Reactor Safety

    International Nuclear Information System (INIS)

    2018-01-01

    Self-assessment is an organization’s internal process to review its current status, processes and performance against predefined criteria and thereby to provide key elements for the organization’s continual development and improvement. Self-assessment helps the organization to think through what it is expected to do, how it is performing in relation to these expectations, and what it needs to do to improve performance, fulfil the expectations and achieve better compliance with the predefined criteria. This publication provides guidelines for a research reactor operating organization to perform a self-assessment of the safety management and the safety of the facility and to identify gaps between the current situation and the IAEA safety requirements for research reactors. These guidelines also provide a methodology for Member States, regulatory bodies and operating organizations to perform a self-assessment of their application of the provisions of the Code of Conduct on the Safety of Research Reactors. This publication also addresses planning, implementation and follow-up of actions to enhance safety and strengthen application of the Code. The guidelines are applicable to all types of research reactor and critical and subcritical assemblies, at all stages in their lifetimes, and to States, regulatory bodies and operating organizations throughout all phases of research reactor programmes. Research reactor operating organizations can use these guidelines at any time to support self-assessments conducted in accordance with the organization’s integrated management system. These guidelines also serve as a tool for an organization to prepare to receive an IAEA Integrated Safety Assessment of Research Reactors (INSARR) mission. An important result of this is the opportunity for an operating organization to identify focus areas and make safety improvements in advance of an INSARR mission, thereby increasing the effectiveness of the mission and efficiency of the

  10. Probabilistic safety assessment - regulatory perspective

    International Nuclear Information System (INIS)

    Solanki, R.B.; Paul, U.K.; Hajra, P.; Agarwal, S.K.

    2002-01-01

    Full text: Nuclear power plants (NPPs) have been designed, constructed and operated mainly based on deterministic safety analysis philosophy. In this approach, a substantial amount of safety margin is incorporated in the design and operational requirements. Additional margin is incorporated by applying the highest quality engineering codes, standards and practices, and the concept of defence-in-depth in design and operating procedures, by including conservative assumptions and acceptance criteria in plant response analysis of postulated initiating events (PIEs). However, as the probabilistic approach has been improved and refined over the years, it is possible for the designer, operator and regulator to get a more detailed and realistic picture of the safety importance of plant design features, operating procedures and operational practices by using probabilistic safety assessment (PSA) along with the deterministic methodology. At present, many countries including USA, UK and France are using PSA insights in their decision making along with deterministic basis. India has also made substantial progress in the development of methods for carrying out PSA. However, consensus on the use of PSA in regulatory decision-making has not been achieved yet. This paper emphasises on the requirements (e.g.,level of details, key modelling assumptions, data, modelling aspects, success criteria, sensitivity and uncertainty analysis) for improving the quality and consistency in performance and use of PSA that can facilitate meaningful use of the PSA insights in the regulatory decision-making in India. This paper also provides relevant information on international scenario and various application areas of PSA along with progress made in India. The PSA perspective presented in this paper may help in achieving consensus on the use of PSA for regulatory / utility decision-making in design and operation of NPPs

  11. Safety Culture Assessment at Regulatory Body - PNRA Experience of Implementing IAEA Methodology for Safety Culture Self Assessment

    International Nuclear Information System (INIS)

    Bhatti, S.A.N.; Arshad, N.

    2016-01-01

    The prevalence of a good safety culture is equally important for all kind of organizations involved in nuclear business including operating organizations, designers, regulator, etc., and this should be reflected through all the processes and activities of these organizations. The need for inculcating safety culture into regulatory processes and practices is gradually increasing since the major accident at Fukushima. Accordingly, several international fora in last few years repeatedly highlighted the importance of prevalence of safety culture in regulatory bodies as well. The utilisation of concept of safety culture always remained applicable in regulatory activities of PNRA in the form of core values. After the Fukushima accident, PNRA considered it important to check the extent of utilisation of safety culture concept in organizational activities and decided to conduct its “Safety Culture Self-Assessment (SCSA)” for presenting itself as a role model in-order to endorse the fact that safety culture at regulatory authority plays an important role to influence safety culture at licenced facilities.

  12. ASCOT guidelines revised 1996 edition. Guidelines for organizational self-assessment of safety culture and for reviews by the assessment of safety culture in organizations team

    International Nuclear Information System (INIS)

    1996-01-01

    In order to properly assess safety culture, it is necessary to consider the contribution of all organizations which have an impact on it. Therefore, while assessing the safety culture in an operating organization it is necessary to address at least its interfaces with the local regulatory agency, utility corporate headquarters and supporting organizations. These guidelines are primarily intended for use by any organization wishing to conduct a self-assessment of safety culture. They should also serve as a basis for conducting an international peer review of the organization's self-assessment carried out by an ASCOT (Assessment of Safety Culture in Organizations Team) mission

  13. The application of fracture mechanics to the safety assessment of transport casks for radioactive materials

    International Nuclear Information System (INIS)

    Zencker, U.; Mueller, K.; Droste, B.; Roedel, R.; Voelzke, H.

    2004-01-01

    BAM is the German responsible authority for the mechanical and thermal design safety assessment of packages for the transport of radioactive materials. The assessment has to cover the brittle fracture safety proof of package components made of potentially brittle materials. This paper gives a survey of the regulatory and technical requirements for such an assessment according to BAM's new ''Guidelines for the Application of Ductile Cast Iron for Transport and Storage Casks for Radioactive Materials''. Based on these guidelines higher stresses than before can become permissible, but it is necessary to put more effort into the safety assessment procedure. The fundamentals of such a proof with the help of the methods of fracture mechanics are presented. The recommended procedure takes into account the guidelines of the IAEA Advisory Material which are based on the prevention of crack initiation. Examples of BAM's research and safety assessment practices are given. Recommendations for further developments towards package designs with higher acceptable stress levels will be concluded

  14. The application of fracture mechanics to the safety assessment of transport casks for radioactive material

    International Nuclear Information System (INIS)

    Zencker, U.; Mueller, K.; Droste, B.; Roedel, R.; Voelzke, H.

    2004-01-01

    BAM is the responsible authority in Germany for the assessment of the mechanical and thermal design safety of packages for the transport of radioactive materials. The assessment has to cover the brittle fracture safety 'proof of package' for components made of potentially brittle materials. This paper gives a survey of the regulatory and technical requirements for such an assessment according to BAM's new 'Guidelines for the application of ductile cast iron for transport and storage casks for radioactive materials'. Based on these guidelines, higher stresses than before will be permissible, but it is necessary to put more effort into the safety assessment procedure. The fundamentals of such a proof using the methods of fracture mechanics are presented. The recommended procedure takes into account the guidelines of the IAEA's advisory material which are based on the prevention of crack initiation. Examples of BAM's research and safety assessment practices are given. Recommendations for further developments towards package designs with higher acceptable stress levels will conclude the paper. (author)

  15. Food safety culture assessment using a comprehensive mixed-methods approach

    NARCIS (Netherlands)

    Nyarugwe, Shingai P.; Linnemann, Anita; Nyanga, Loveness K.; Fogliano, Vincenzo; Luning, Pieternel A.

    2018-01-01

    Food safety challenges are a global concern especially in emerging economies, which are in the midst of developmental changes. The challenges are directly or indirectly related to the behaviour and decision-making of personnel, and to an organisation's food safety culture. This study evaluated the

  16. Criticality safety evaluations - a open-quotes stalking horseclose quotes for integrated safety assessment

    International Nuclear Information System (INIS)

    Williams, R.A.

    1995-01-01

    The Columbia Fuel Fabrication Facility of the Westinghouse Commercial Nuclear Fuel Division manufactures low-enriched uranium fuel and associated components for use in commercial pressurized water power reactors. To support development of a comprehensive integrated safety assessment (ISA) for the facility, as well as to address increasing U.S. Nuclear Regulatory Commission (NRC) expectations regarding such a facility's criticality safety assessments, a project is under way to complete criticality safety evaluations (CSEs) of all plant systems used in processing nuclear materials. Each CSE is made up of seven sections, prepared by a multidisciplinary team of process engineers, systems engineers, safety engineers, maintenance representatives, and operators. This paper provides a cursory outline of the type of information presented in a CSE

  17. IRSN-ANCCLI partnership. Work session on Complementary safety assessments - November 2011

    International Nuclear Information System (INIS)

    Lachaume, Jean-Luc; Lheureux, Yves; Sene, Monique; Sene, Raymond; Jorel, Martial; Lavarenne, Caroline; Rousseau, Jean-Marie; Rebour, Vincent; Baumont, David; Dupuy, Patricia

    2011-11-01

    After an overview by the ASN of complementary safety assessments and an assessment of 'post-Fukushima' inspections of basic nuclear installations, the contributions (Power Point presentations) of this seminar proposed: the opinion of the Gravelines CLI (local information commission) on the Gravelines complementary safety assessment report, an analysis and discussion by the GSIEN on reports of complementary assessment of safety of nuclear installations with respect to the Fukushima accident, an analysis by the IRSN of complementary safety assessments performed by operators, the IRSN approach to analyze complementary safety assessments, reports on installation conditions, external flooding and seismic hazard, 'meltdown prevention' aspects in the management of accidental situations in EDF reactors

  18. Initial development of a practical safety audit tool to assess fleet safety management practices.

    Science.gov (United States)

    Mitchell, Rebecca; Friswell, Rena; Mooren, Lori

    2012-07-01

    Work-related vehicle crashes are a common cause of occupational injury. Yet, there are few studies that investigate management practices used for light vehicle fleets (i.e. vehicles less than 4.5 tonnes). One of the impediments to obtaining and sharing information on effective fleet safety management is the lack of an evidence-based, standardised measurement tool. This article describes the initial development of an audit tool to assess fleet safety management practices in light vehicle fleets. The audit tool was developed by triangulating information from a review of the literature on fleet safety management practices and from semi-structured interviews with 15 fleet managers and 21 fleet drivers. A preliminary useability assessment was conducted with 5 organisations. The audit tool assesses the management of fleet safety against five core categories: (1) management, systems and processes; (2) monitoring and assessment; (3) employee recruitment, training and education; (4) vehicle technology, selection and maintenance; and (5) vehicle journeys. Each of these core categories has between 1 and 3 sub-categories. Organisations are rated at one of 4 levels on each sub-category. The fleet safety management audit tool is designed to identify the extent to which fleet safety is managed in an organisation against best practice. It is intended that the audit tool be used to conduct audits within an organisation to provide an indicator of progress in managing fleet safety and to consistently benchmark performance against other organisations. Application of the tool by fleet safety researchers is now needed to inform its further development and refinement and to permit psychometric evaluation. Copyright © 2012 Elsevier Ltd. All rights reserved.

  19. Use of Foodomics for Control of Food Processing and Assessing of Food Safety.

    Science.gov (United States)

    Josić, D; Peršurić, Ž; Rešetar, D; Martinović, T; Saftić, L; Kraljević Pavelić, S

    Food chain, food safety, and food-processing sectors face new challenges due to globalization of food chain and changes in the modern consumer preferences. In addition, gradually increasing microbial resistance, changes in climate, and human errors in food handling remain a pending barrier for the efficient global food safety management. Consequently, a need for development, validation, and implementation of rapid, sensitive, and accurate methods for assessment of food safety often termed as foodomics methods is required. Even though, the growing role of these high-throughput foodomic methods based on genomic, transcriptomic, proteomic, and metabolomic techniques has yet to be completely acknowledged by the regulatory agencies and bodies. The sensitivity and accuracy of these methods are superior to previously used standard analytical procedures and new methods are suitable to address a number of novel requirements posed by the food production sector and global food market. © 2017 Elsevier Inc. All rights reserved.

  20. Animal-Free Chemical Safety Assessment

    Directory of Open Access Journals (Sweden)

    George D Loizou

    2016-07-01

    Full Text Available The exponential growth of the Internet of Things and the global popularity and remarkable decline in cost of the mobile phone is driving the digital transformation of medical practice. The rapidly maturing digital, nonmedical world of mobile (wireless devices, cloud computing and social networking is coalescing with the emerging digital medical world of omics data, biosensors and advanced imaging which offers the increasingly realistic prospect of personalized medicine. Described as a potential seismic shift from the current healthcare model to a wellness paradigm that is predictive, preventative, personalized and participatory, this change is based on the development of increasingly sophisticated biosensors which can track and measure key biochemical variables in people. Additional key drivers in this shift are metabolomic and proteomic signatures, which are increasingly being reported as pre-symptomatic, diagnostic and prognostic of toxicity and disease. These advancements also have profound implications for toxicological evaluation and safety assessment of pharmaceuticals and environmental chemicals. An approach based primarily on human in vivo and high-throughput in vitro human cell-line data is a distinct possibility. This would transform current chemical safety assessment practise which operates in a human data poor to a human data rich environment. This could also lead to a seismic shift from the current animal-based to an animal-free chemical safety assessment paradigm.

  1. Additional safety assessments. Report by the Nuclear Safety Authority - December 2011

    International Nuclear Information System (INIS)

    2011-12-01

    The first part of this voluminous report proposes an assessment of targeted audits performed in French nuclear installations (water pressurized reactors on the one hand, laboratories, factories and waste and dismantling installations on the other hand) on issues related to the Fukushima accident. The examined issues were the protection against flooding and against earthquake, and the loss of electricity supplies and of cooling sources. The second part addresses the additional safety assessments of the reactors and the European resistance tests: presentation of the French electronuclear stock, earthquake, flooding and natural hazards (installation sizing, safety margin assessment), loss of electricity supplies and cooling systems, management of severe accidents, subcontracting conditions. The third part addresses the same issues for nuclear installations other than nuclear power reactors

  2. The achievement and assessment of safety in systems containing software

    International Nuclear Information System (INIS)

    Ball, A.; Dale, C.J.; Butterfield, M.H.

    1986-01-01

    In order to establish confidence in the safe operation of a reactor protection system, there is a need to establish, as far as it is possible, that: (i) the algorithms used are correct; (ii) the system is a correct implementation of the algorithms; and (iii) the hardware is sufficiently reliable. This paper concentrates principally on the second of these, as it applies to the software aspect of the more accurate and complex trip functions to be performed by modern reactor protection systems. In order to engineer safety into software, there is a need to use a development strategy which will stand a high chance of achieving a correct implementation of the trip algorithms. This paper describes three broad methodologies by which it is possible to enhance the integrity of software: fault avoidance, fault tolerance and fault removal. Fault avoidance is concerned with making the software as fault free as possible by appropriate choice of specification, design and implementation methods. A fault tolerant strategy may be advisable in many safety critical applications, in order to guard against residual faults present in the software of the installed system. Fault detection and removal techniques are used to remove as many faults as possible of those introduced during software development. The paper also discusses safety and reliability assessment as it applies to software, outlining the various approaches available. Finally, there is an outline of a research project underway in the UKAEA which is intended to assess methods for developing and testing safety and protection systems involving software. (author)

  3. Probabilistic safety assessment of the Fugen NPS

    International Nuclear Information System (INIS)

    Sotsu, Masutake; Iguchi, Yukihiro; Mizuno, Kouichi; Sato, Shinichirou; Shimizu, Miwako

    1999-01-01

    We performed a probabilistic safety assessment (PSA) on the Fugen NPS. The main topic of assessment was internal factors. We assessment core damage frequency (level 1 PSA) and containment damage frequency (level 2 PSA) during rated operation, and core damage frequency during shutdown (PSA during shutdowns). Our assessment showed that the core damage frequency of Fugen is well below the IAEA criteria for existing plants, that the conditional containment damage during shutdown is almost the target value of 0.1, and that the core damage frequency during shutdown is almost the same as that assessed during operation. These results confirm that the Fugen plant maintains a sufficient safety margin during shutdowns for regular inspections and for refueling. We developed and verified the effectiveness of an accident management plan incorporating the results of the assessment. (author)

  4. Safety risk assessment using analytic hierarchy process (AHP) during planning and budgeting of construction projects.

    Science.gov (United States)

    Aminbakhsh, Saman; Gunduz, Murat; Sonmez, Rifat

    2013-09-01

    The inherent and unique risks on construction projects quite often present key challenges to contractors. Health and safety risks are among the most significant risks in construction projects since the construction industry is characterized by a relatively high injury and death rate compared to other industries. In construction project management, safety risk assessment is an important step toward identifying potential hazards and evaluating the risks associated with the hazards. Adequate prioritization of safety risks during risk assessment is crucial for planning, budgeting, and management of safety related risks. In this paper, a safety risk assessment framework is presented based on the theory of cost of safety (COS) model and the analytic hierarchy process (AHP). The main contribution of the proposed framework is that it presents a robust method for prioritization of safety risks in construction projects to create a rational budget and to set realistic goals without compromising safety. The framework provides a decision tool for the decision makers to determine the adequate accident/injury prevention investments while considering the funding limits. The proposed safety risk framework is illustrated using a real-life construction project and the advantages and limitations of the framework are discussed. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

  5. Safety standards for near surface disposal and the safety case and supporting safety assessment for demonstrating compliance with the standards

    International Nuclear Information System (INIS)

    Metcalf, P.

    2003-01-01

    The report presents the safety standards for near surface disposal (ICRP guidance and IAEA standards) and the safety case and supporting safety assessment for demonstrating compliance with the standards. Special attention is paid to the recommendations for disposal of long-lived solid radioactive waste. The requirements are based on the principle for the same level of protection of future individuals as for the current generation. Two types of exposure are considered: human intrusion and natural processes and protection measures are discussed. Safety requirements for near surface disposal are discussed including requirements for protection of human health and environment, requirements or safety assessments, waste acceptance and requirements etc

  6. Fusion blanket inherent safety assessment

    International Nuclear Information System (INIS)

    Sze, D.K.; Jung, J.; Cheng, E.T.

    1986-01-01

    Fusion has significant potential safety advantages. There is a strong incentive for designing fusion plants to ensure that inherent safety will be achieved. Accordingly, both the Tokamak Power Systems Studies and MINIMARS have identified inherent safety as a design goal. A necessary condition is for the blanket to maintain its configuration and integrity under all credible accident conditions. A main problem is caused by afterheat removal in an accident condition. In this regard, it is highly desirable to achieve the required level of protection of the plant capital investment and limitation of radioactivity release by systems that rely only on inherent properties of matter (e.g., thermal conductivity, specific heat, etc.) and without the use of active safety equipment. This paper assesses the conditions under which inherent safety is feasible. Three types of accident conditions are evaluated for two blankets. The blankets evaluated are a self cooled vanadium/lithium blanket and a self-cooled vanadium/Flibe blanket. The accident conditions evaluated are: (1) loss-of-flow accident; (2) loss-of-coolant accident (LOCA); and (3) partial loss-of-coolant accident

  7. Buffer and backfill process report for the safety assessment SR-Can

    Energy Technology Data Exchange (ETDEWEB)

    Sellin, Patrik (comp.)

    2006-09-15

    This document compiles information on processes in the buffer and deposition tunnel backfill relevant for long-term safety of a KBS-repository. It supports the safety assessment SR-Can, which is a preparatory step for a safety assessment that will support the licence application for a final repository in Sweden. The purpose of the process reports is to document the scientific knowledge of the processes to a level required for an adequate treatment of the processes in the safety assessment. The documentation is not exhaustive from a scientific point of view, since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of an assessment. However, it must be sufficiently detailed to motivate, by arguments founded on scientific understanding, the treatment of each process in the safety assessment. The purpose is further to determine how to handle each process in the safety assessment at an appropriate degree of detail, and to demonstrate how uncertainties are taken care of, given the suggested handling.

  8. Buffer and backfill process report for the safety assessment SR-Can

    International Nuclear Information System (INIS)

    Sellin, Patrik

    2006-09-01

    This document compiles information on processes in the buffer and deposition tunnel backfill relevant for long-term safety of a KBS-repository. It supports the safety assessment SR-Can, which is a preparatory step for a safety assessment that will support the licence application for a final repository in Sweden. The purpose of the process reports is to document the scientific knowledge of the processes to a level required for an adequate treatment of the processes in the safety assessment. The documentation is not exhaustive from a scientific point of view, since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of an assessment. However, it must be sufficiently detailed to motivate, by arguments founded on scientific understanding, the treatment of each process in the safety assessment. The purpose is further to determine how to handle each process in the safety assessment at an appropriate degree of detail, and to demonstrate how uncertainties are taken care of, given the suggested handling

  9. Experience in the implementation of quality assurance program and safety culture assessment of research reactor operation and maintenance

    International Nuclear Information System (INIS)

    Syarip; Suryopratomo, K.

    2001-01-01

    The implementation of quality assurance program and safety culture for research reactor operation are of importance to assure its safety status. It comprises an assessment of the quality of both technical and organizational aspects involved in safety. The method for the assessment is based on judging the quality of fulfillment of a number of essential issues for safety i.e. through audit, interview and/or discussions with personnel and management in plant. However, special consideration should be given to the data processing regarding the fuzzy nature of the data i.e. in answering the questionnaire. To accommodate this situation, the SCAP, a computer program based on fuzzy logic for assessing plant safety status, has been developed. As a case study, the experience in the assessment of Kartini research reactor safety status shows that it is strongly related to the implementation of quality assurance program in reactor operation and awareness of reactor operation staffs to safety culture practice. It is also shown that the application of the fuzzy rule in assessing reactor safety status gives a more realistic result than the traditional approach. (author)

  10. A Computer Program for Assessing Nuclear Safety Culture Impact

    Energy Technology Data Exchange (ETDEWEB)

    Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of)

    2014-10-15

    Through several accidents of NPP including the Fukushima Daiichi in 2011 and Chernobyl accidents in 1986, a lack of safety culture was pointed out as one of the root cause of these accidents. Due to its latent influences on safety performance, safety culture has become an important issue in safety researches. Most of the researches describe how to evaluate the state of the safety culture of the organization. However, they did not include a possibility that the accident occurs due to the lack of safety culture. Because of that, a methodology for evaluating the impact of the safety culture on NPP's safety is required. In this study, the methodology for assessing safety culture impact is suggested and a computer program is developed for its application. SCII model which is the new methodology for assessing safety culture impact quantitatively by using PSA model. The computer program is developed for its application. This program visualizes the SCIs and the SCIIs. It might contribute to comparing the level of the safety culture among NPPs as well as improving the management safety of NPP.

  11. Safety assessment of the liquid-fed ceramic melter process

    International Nuclear Information System (INIS)

    Buelt, J.L.; Partain, W.L.

    1980-08-01

    As part of its development program for the solidification of high-level nuclear waste, Pacific Northwest Laboratory assessed the safety issues for a complete liquid-fed ceramic melter (LFCM) process. The LFCM process, an adaption of commercial glass-making technology, is being developed to convert high-level liquid waste from the nuclear fuel cycle into glass. This safety assessment uncovered no unresolved or significant safety problems with the LFCM process. Although in this assessment the LFCM process was not directly compared with other solidification processes, the safety hazards of the LFCM process are comparable to those of other processes. The high processing temperatures of the glass in the LFCM pose no additional significant safety concerns, and the dispersible inventory of dried waste (calcine) is small. This safety assessment was based on the nuclear power waste flowsheet, since power waste is more radioactive than defense waste at the time of solidification, and all accident conditions for the power waste would have greater radiological consequences than those for defense waste. An exhaustive list of possible off-standard conditions and equipment failures was compiled. These accidents were then classified according to severity of consequence and type of accident. Radionuclide releases to the stack were calculated for each group of accidents using conservative assumptions regarding the retention and decontamination features of the process and facility. Two recommendations that should be considered by process designers are given in the safety assessment

  12. Interim main report of the safety assessment SR-Can

    Energy Technology Data Exchange (ETDEWEB)

    Hedin, Allan (ed.) [and others

    2004-08-01

    This document is an interim report on the safety assessment SR-Can (SR in the acronym stands for Safety Report and Can is short for canister). The final SR-Can report will support SKB's application to build an Encapsulation plant for spent nuclear fuel and is to be produced in 2006. The purpose of the present interim report is to demonstrate the methodology for safety assessment so that it can be reviewed before it is used in a license application. The assessment relates to the KBS-3 disposal concept in which copper canisters with a cast iron insert containing spent nuclear fuel are surrounded by bentonite clay and deposited at approximately 500 m depth in saturated, granitic rock. Preliminary data from the Forsmark site, presently being investigated by SKB as one of the candidate for a KBS-3 repository are used to some extent as examples. However, the collected data are yet too sparse to allow an evaluation of safety for this site. An important aim of this report is to demonstrate the proper handling of requirements on the safety assessment in applicable regulations. Therefore, regulations issued by the Swedish Nuclear Power Inspectorate and the Swedish Radiation Protection Authority are duplicated in an Appendix. The principal acceptance criterion requires that 'the annual risk of harmful effects after closure does not exceed 10{sup -6} for a representative individual in the group exposed to the greatest risk'. 'Harmful effects' refer to cancer and hereditary effects. Following the introductory chapter 1, this report outlines the methodology for the SR-Can assessment in chapter 2, and presents in chapters 3, 4 and 5 the initial state of the system and the plans and methods for handling external influences and internal processes, respectively. Function indicators are introduced in chapter 6 and a preliminary evaluation of these is given in chapter 7. The material presented in the first seven chapters is utilised in the scenario selection

  13. Safety instrumented systems in the oil and gas industry : Concepts and methods for safety and reliability assessments in design and operation

    Energy Technology Data Exchange (ETDEWEB)

    Lundteigen, Mary Ann

    2009-07-01

    This thesis proposes new methods and gives new insight to safety and reliability assessments of safety instrumented systems (SISs). These systems play an important role in many industry sectors and are used to detect the onset of hazardous events and mitigate their consequences to humans, the environment, and material assets. The thesis focuses on SIS applications in the oil and gas industry. Here, the SIS must respond to hazardous events such as gas leakages, fires, and over pressurization. Because there are personnel onboard the oil and gas installations, the operations take place in a vulnerable marine environment, and substantial values are associated with the offshore facilities, the reliability of SIS is of great concern to the public, the authorities, and the plant owners. The objective of this project has been to identify some of the key factors that influence the SIS reliability, clarify their effects on reliability, and suggest means to improve the treatment of these factors in safety and reliability assessments in design and operation. The project builds on concepts, methods, and definitions in two key standards for SIS design, construction, and operation: IEC 61508 and IEC 61511. The main contributions from this project are: A product development model that integrates reliability, availability, maintainability, and safety (RAMS) requirements with product development. The contributions have been presented in ten articles, five published in international journals, two submitted for publication, and three presented at conferences and in conference proceedings. The contributions are also directed to the industry and the actors that are involved in SIS design, construction, and operation. Even if the oil and gas industry is the main focus area, the results may be relevant for other industry sectors as well. SIS manufacturers and SIS designers face a large number of requirements from authorities, oil companies, international standards, and so on. At the same

  14. Safety assessment of novel foods and strategies to determine their safety in use

    International Nuclear Information System (INIS)

    Edwards, Gareth

    2005-01-01

    Safety assessment of novel foods requires a different approach to that traditionally used for the assessment of food chemicals. A case-by-case approach is needed which must be adapted to take account of the characteristics of the individual novel food. A thorough appraisal is required of the origin, production, compositional analysis, nutritional characteristics, any previous human exposure and the anticipated use of the food. The information should be compared with a traditional counterpart of the food if this is available. In some cases, a conclusion about the safety of the food may be reached on the basis of this information alone, whereas in other cases, it will help to identify any nutritional or toxicological testing that may be required to further investigate the safety of the food. The importance of nutritional evaluation cannot be over-emphasised. This is essential for the conduct of toxicological studies in order to avoid dietary imbalances, etc., that might lead to interpretation difficulties, but also in the context of its use as food and to assess the potential impact of the novel food on the human diet. The traditional approach used for chemicals, whereby an acceptable daily intake (ADI) is established with a large safety margin relative to the expected exposure, cannot be applied to foods. The assessment of safety in use should be based upon a thorough knowledge of the composition of the food, evidence from nutritional, toxicological and human studies, expected use of the food and its expected consumption. Safety equates to a reasonable certainty that no harm will result from intended uses under the anticipated conditions of consumption

  15. LANL Safety Conscious Work Environment (SCWE) Self-Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hargis, Barbara C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-01-29

    On December 21, 2012 Secretary of Energy Chu transmitted to the Defense Nuclear Facilities Safety Board (DNFSB) revised commitments on the implementation plan for Safety Culture at the Waste Treatment and Immobilization Plant. Action 2-5 was revised to require contractors and federal organizations to complete Safety Conscious Work Environment (SCWE) selfassessments and provide reports to the appropriate U.S. Department of Energy (DOE) - Headquarters Program Office by September 2013. Los Alamos National Laboratory (LANL) planned and conducted a Safety Conscious Work Environment (SCWE) Self-Assessment over the time period July through August, 2013 in accordance with the SCWE Self-Assessment Guidance provided by DOE. Significant field work was conducted over the 2-week period August 5-16, 2013. The purpose of the self-assessment was to evaluate whether programs and processes associated with a SCWE are in place and whether they are effective in supporting and promoting a SCWE.

  16. Safety assessment of high consequence robotics system

    International Nuclear Information System (INIS)

    Robinson, D.G.; Atcitty, C.B.

    1996-01-01

    This paper outlines the use of a failure modes and effects analysis for the safety assessment of a robotic system being developed at Sandia National Laboratories. The robotic system, the weigh and leak check system, is to replace a manual process for weight and leakage of nuclear materials at the DOE Pantex facility. Failure modes and effects analyses were completed for the robotics process to ensure that safety goals for the systems have been met. Due to the flexible nature of the robot configuration, traditional failure modes and effects analysis (FMEA) were not applicable. In addition, the primary focus of safety assessments of robotics systems has been the protection of personnel in the immediate area. In this application, the safety analysis must account for the sensitivities of the payload as well as traditional issues. A unique variation on the classical FMEA was developed that permits an organized and quite effective tool to be used to assure that safety was adequately considered during the development of the robotic system. The fundamental aspects of the approach are outlined in the paper

  17. Cooperative project on methods and techniques for assessment of ageing and safety of nuclear objects

    International Nuclear Information System (INIS)

    Bundara, B.; Udovc, M.; Cvelbar, R.; Vojvodic Tuma, J.; Celin, R.; Cizelj, L.; Simonovski, I.; Pirs, B.; Zabric, I.

    2007-01-01

    Nuclear Power Plants are so far the most demanding electric power plants concerning the extent and complexity of knowledge that is needed for design, construction, installation, safe operation and proper maintenance. For safe operation of the NPP it is important to have reliable inspection procedures and methods to detect the relevant defects in the components. It is also important to have effective techniques and efficient methodology that enable precise estimation of the material degradation and reliable prediction of the remaining period of the safe service of structures and components. During the operation of NPP its materials, structures and components are exposed to various impacts that have for the result changes in the material. Changes usually manifest as deviation from the origin (generally considered as defects) and can be observed at level of microstructure and/or at structural level. Defects are consequence of ageing and ageing is a consequence of mechanical, thermal, chemical, radiation induced and other processes. Complexity of the NPP and continuous operation at high level of safety demands extensive cooperation of researchers and engineers with different scientific and educational background. In the paper is discussed the importance of sufficient support to the NPP related research projects and the need for cooperation between institutes. As an example is presented the cooperative project that bands the research groups with different scientific background into complementary team working on multidisciplinary project focused on assessment of ageing and safety of nuclear objects. (author)

  18. Current status and applications of intergrated safety assessment and simulation code system for ISA

    Energy Technology Data Exchange (ETDEWEB)

    Izquierdo, J. M.; Hortal, J.; Perea, M. Sanchez; Melendez, E. [Modeling and Simulation Area (MOSI), Nuclear Safety Council (CSN), Madrid (Spain); Queral, E.; Rivas-Lewicky, J. [Energy and Fuels Department, Technical University of Madrid (UPM), Madrid (Spain)

    2017-03-15

    This paper reviews current status of the unified approach known as integrated safety assessment (ISA), as well as the associated SCAIS (simulation codes system for ISA) computer platform. These constitute a proposal, which is the result of collaborative action among the Nuclear Safety Council (CSN), University of Madrid (UPM), and NFQ Solutions S.L, aiming to allow independent regulatory verification of industry quantitative risk assessments. The content elaborates on discussions of the classical treatment of time in conventional probabilistic safety assessment (PSA) sequences and states important conclusions that can be used to avoid systematic and unacceptable underestimation of the failure exceedance frequencies. The unified ISA method meets this challenge by coupling deterministic and probabilistic mutual influences. The feasibility of the approach is illustrated with some examples of its application to a real size plant.

  19. A Risk Assessment Model for Reduced Aircraft Separation: A Quantitative Method to Evaluate the Safety of Free Flight

    Science.gov (United States)

    Cassell, Rick; Smith, Alex; Connors, Mary; Wojciech, Jack; Rosekind, Mark R. (Technical Monitor)

    1996-01-01

    As new technologies and procedures are introduced into the National Airspace System, whether they are intended to improve efficiency, capacity, or safety level, the quantification of potential changes in safety levels is of vital concern. Applications of technology can improve safety levels and allow the reduction of separation standards. An excellent example is the Precision Runway Monitor (PRM). By taking advantage of the surveillance and display advances of PRM, airports can run instrument parallel approaches to runways separated by 3400 feet with the same level of safety as parallel approaches to runways separated by 4300 feet using the standard technology. Despite a wealth of information from flight operations and testing programs, there is no readily quantifiable relationship between numerical safety levels and the separation standards that apply to aircraft on final approach. This paper presents a modeling approach to quantify the risk associated with reducing separation on final approach. Reducing aircraft separation, both laterally and longitudinally, has been the goal of several aviation R&D programs over the past several years. Many of these programs have focused on technological solutions to improve navigation accuracy, surveillance accuracy, aircraft situational awareness, controller situational awareness, and other technical and operational factors that are vital to maintaining flight safety. The risk assessment model relates different types of potential aircraft accidents and incidents and their contribution to overall accident risk. The framework links accident risks to a hierarchy of failsafe mechanisms characterized by procedures and interventions. The model will be used to assess the overall level of safety associated with reducing separation standards and the introduction of new technology and procedures, as envisaged under the Free Flight concept. The model framework can be applied to various aircraft scenarios, including parallel and in

  20. A study on safety assessment methodology for a vitrification plant

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Y. C.; Lee, G. S.; Choi, Y. C.; Kim, G. H. [Yonsei Univ., Seoul (Korea, Republic of)

    2002-03-15

    In this study, the technical and regulatory status of radioactive waste vitrification technologies in foreign and domestic plants is investigated and analyzed, and then significant factors are suggested which must be contained in the final technical guideline or standard for the safety assessment of vitrification plants. Also, the methods to estimate the stability of vitrified waste forms are suggested with property analysis of them. The contents and scope of the study are summarized as follows : survey of the status on radioactive waste vitrification technologies in foreign and domestic plants, survey of the characterization methodology for radioactive waste form, analysis of stability for vitrified waste forms, survey and analysis of technical standards and regulations concerned with them in foreign and domestic plants, suggestion of significant factors for the safety assessment of vitrification plants, submission of regulated technical standard on radioactive waste vitrification plats.

  1. A proposed safety assurance method and its application to the fusion experimental reactor

    International Nuclear Information System (INIS)

    Okazaki, T.; Seki, Y.; Inabe, T.; Aoki, I.

    1995-01-01

    Importance categorization and hazard identification methods have been proposed for a fusion experimental reactor. A parameter, the system index, is introduced in the categorization method. The relative importance of systems with safety functions can be classified by the largeness of the system index and whether or not the system acts as a boundary for radioactive materials. This categorization can be used as the basic principle in determining structure design assessment, seismic design criteria etc. For the hazard identification the system time energy matrix is proposed, where the time and spatial distributions of hazard energies are used. This approach is formulated more systematically than an ad-hoc identification of hazard events and it is useful to select design basis events which are employed in the assessment of safety designs. (orig.)

  2. Safety/security interface assessments at commercial nuclear power plants

    International Nuclear Information System (INIS)

    Byers, K.R.; Brown, P.J.; Norderhaug, L.R.

    1985-01-01

    The findings of the Haynes Task Force Committee (NUREG-0992) are used as the basis for defining safety/security assessment team activities at commercial nuclear power plants in NRC Region V. A safety/security interface assessment outline and the approach used for making the assessments are presented along with the composition of team members. As a result of observing simulated plant emergency conditions during scheduled emergency preparedness exercises, examining security and operational response procedures, and interviewing plant personnel, the team has identified instances where safety/security conflicts can occur

  3. Safety/security interface assessments at commercial nuclear power plants

    International Nuclear Information System (INIS)

    Byers, K.R.; Brown, P.J.; Norderhaug, L.R.

    1985-07-01

    The findings of the Haynes Task Force Committee (NUREG-0992) are used as the basis for defining safety/security assessment team activities at commercial nuclear power plants in NRC Region V. A safety/security interface assessment outline and the approach used for making the assessments are presented along with the composition of team members. As a result of observing simulated plant emergency conditions during scheduled emergency preparedness exercises, examining security and operational response procedures, and interviewing plant personnel, the team has identified instances where safety/security conflicts can occur. 2 refs

  4. Safety assessment for the IS process in a hydrogen production facility

    International Nuclear Information System (INIS)

    Cho, Nam Chul

    2005-08-01

    A substitute energy development have been required due to the dry up of the fossil fuel and an environmental problem. Consequently, among substitute energy to be discussed, producing hydrogen from water which does not release carbon is a very promising technology. Also, Iodine-Sulfur(IS) thermochemical water decomposition is one of the promising process which is used to produce hydrogen efficiently using the high temperature gas-cooled reactor(HTGR) as an energy source that is possible to supply heat over 1000 .deg. C. In this study, to make a safety assessment of the hydrogen production using the IS process, an initiating events analysis and an accident scenario modeling considering the relief system were carried out. A method for initiating event identification used the Master Logic Diagram(MLD) that is logical and deductive. As a result, 9 initiating events that cause a leakage of the chemical material were identified. 6 accident scenario based on the initiating event are identified and quantified to the event trees. The frequency of the chemical material leakage produced by IS process is estimated relatively high to the value of 1.22x10 -4 /y. Therefore, it requires more effort on safety of the hydrogen production which can be considered as a part of the nuclear system and safety management research to increase social acceptability. Moreover, these methods will be helpful to the safety assessment of the hydrogen production system of the IS process in general

  5. Safety assessment for Generation IV nuclear systems

    International Nuclear Information System (INIS)

    Leahy, T.J.

    2012-01-01

    The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Recent RSWG work has focused on the definition of an integrated safety assessment methodology (ISAM) for evaluating the safety of Generation IV systems. ISAM is an integrated 'tool-kit' consisting of 5 analytical techniques that are available and matched to appropriate stages of Generation IV system concept development: 1) qualitative safety features review - QSR, 2) phenomena identification and ranking table - PIRT, 3) objective provision tree - OPT, 4) deterministic and phenomenological analyses - DPA, and 5) probabilistic safety analysis - PSA. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time

  6. Nirex safety assessment research programme: 1987/88

    International Nuclear Information System (INIS)

    George, D.; Hodgkinson, D.P.

    1987-01-01

    The Nirex Safety Assessment Research programme's objective is to provide information for the radiological safety case for disposing low-level and intermediate-level radioactive wastes in underground repositories. The programme covers a wide range of experimental studies and mathematical modelling for the near and far field. It attempts to develop a quantitative understanding of events and processes which have an impact on the safety of radioactive waste disposal. (U.K.)

  7. ECORA - Evaluation of Computational Methods for Reactor Safety Analysis

    International Nuclear Information System (INIS)

    Scheuerer, Martina

    2002-01-01

    There were three motivations behind the ECORA Project: - the shortcomings of 0-D system codes in the simulation of 3-D, local flow and heat transfer phenomena, - increased interest in the application of 3-D CFD software as supplement to system codes, - high safety requirements in the nuclear industry required consistent standards for the use and assessment of CFD software. The purpose of ECORA was therefore: - to establish performance criteria for the assessment of CFD software, - to establish Best Practice Guidelines for application and use of CFD software, with the following objectives: - assessment of CFD applications in reactor safety: flows in containment (PANDA experiments) and flows in primary system (UPTF experiments) - Best Practice Guidelines for reactor safety: starting point (ERCOFTAC Best Practice Guidelines), adaptation to CFD application for nuclear safety, extension to assessment of experimental data - recommendations for improvements of CFD software, - network of European 'Centres of Competence for CFD Applications in Reactor Safety'. Currently, there were twelve partners in the ECORA Project, representing nine European countries. The Project was scheduled to last until September 2004. Ms Scheuerer then described the work programme and project structure, the Best Practice Guidelines for CFD simulations, the procedures for quantifying errors, applications of Best Practice Guidelines, Best Practice Guidelines for experimental data, applications to primary system, UPTF and PANDA data. Her conclusions were the following: - the Project had led to the improvement of the quality of CFD calculations in reactor safety, through: the ECORA Best Practice Guidelines, the assessment of shortcomings and the improvement of mathematical models. - It had also led to higher acceptance of CFD in reactor safety. - The next step was the establishment of European 'Centres of Competence for CFD Applications in reactor Safety'

  8. Safety assessment requirements for onsite transfers of radioactive material

    International Nuclear Information System (INIS)

    Opperman, E.K.; Jackson, E.J.; Eggers, A.G.

    1992-05-01

    This document contains the requirements for developing a safety assessment document for an onsite package containing radioactive material. It also provides format and content guidance to establish uniformity in the safety assessment documentation and to ensure completeness of the information provided

  9. Geosphere process report for the safety assessment SR-Site

    International Nuclear Information System (INIS)

    Skagius, Kristina

    2010-11-01

    This report documents geosphere processes identified as relevant to the long-term safety of a KBS-3 repository, and forms an important part of the reporting of the safety assessment SR-Site. The detailed assessment methodology, including the role of the process reports in the assessment, is described in the SR-Site Main report /SKB 2011/

  10. Geosphere process report for the safety assessment SR-Site

    Energy Technology Data Exchange (ETDEWEB)

    Skagius, Kristina (ed.) (Kemakta Konsult AB, Stockholm (Sweden))

    2010-11-15

    This report documents geosphere processes identified as relevant to the long-term safety of a KBS-3 repository, and forms an important part of the reporting of the safety assessment SR-Site. The detailed assessment methodology, including the role of the process reports in the assessment, is described in the SR-Site Main report /SKB 2011/

  11. Scientific Opinion on a Qualified Presumption of Safety (QPS) approach for the safety assessment of botanicals and botanical preparations

    DEFF Research Database (Denmark)

    Pilegaard, Kirsten

    preparation for QPS status, it has been possible to develop a structured assessment scheme that provides a practical method for assessing botanicals and botanical preparations for which an adequate body of knowledge exists and therefore without the need for further testing. Reiterative applications...... in the development of a comprehensive, systematic and transparent methodology. The Scientific Committee recommends its use as an extension of the 2009 EFSA guidance for the safety assessment of botanicals and botanical preparations intended to be used in food supplements....

  12. Bayesian Network Assessment Method for Civil Aviation Safety Based on Flight Delays

    OpenAIRE

    Huawei Wang; Jun Gao

    2013-01-01

    Flight delays and safety are the principal contradictions in the sound development of civil aviation. Flight delays often come up and induce civil aviation safety risk simultaneously. Based on flight delays, the random characteristics of civil aviation safety risk are analyzed. Flight delays have been deemed to a potential safety hazard. The change rules and characteristics of civil aviation safety risk based on flight delays have been analyzed. Bayesian networks (BN) have been used to build ...

  13. Measurement tools and process indicators of patient safety culture in primary care. A mixed methods study by the LINNEAUS collaboration on patient safety in primary care

    Science.gov (United States)

    Parker, Dianne; Wensing, Michel; Esmail, Aneez; Valderas, Jose M

    2015-01-01

    ABSTRACT Background: There is little guidance available to healthcare practitioners about what tools they might use to assess the patient safety culture. Objective: To identify useful tools for assessing patient safety culture in primary care organizations in Europe; to identify those aspects of performance that should be assessed when investigating the relationship between safety culture and performance in primary care. Methods: Two consensus-based studies were carried out, in which subject matter experts and primary healthcare professionals from several EU states rated (a) the applicability to their healthcare system of several existing safety culture assessment tools and (b) the appropriateness and usefulness of a range of potential indicators of a positive patient safety culture to primary care settings. The safety culture tools were field-tested in four countries to ascertain any challenges and issues arising when used in primary care. Results: The two existing tools that received the most favourable ratings were the Manchester patient safety framework (MaPsAF primary care version) and the Agency for healthcare research and quality survey (medical office version). Several potential safety culture process indicators were identified. The one that emerged as offering the best combination of appropriateness and usefulness related to the collection of data on adverse patient events. Conclusion: Two tools, one quantitative and one qualitative, were identified as applicable and useful in assessing patient safety culture in primary care settings in Europe. Safety culture indicators in primary care should focus on the processes rather than the outcomes of care. PMID:26339832

  14. Research on advanced system safety assessment procedures (4)

    International Nuclear Information System (INIS)

    Suzuki, Kazuhiko; Shimada, Yukiyasu

    2001-03-01

    The past research reports in the area of safety engineering proposed the Computer-aided HAZOP system to be applied to Nuclear Reprocessing Facilities. Automated HAZOP system has great advantage compared with human analysts in terms of accuracy of the results, and time required to conduct HAZOP studies. This report surveys the literature on risk assessment and safety design based on the concept of independent protection layers (IPLs). Furthermore, to improve HAZOP System, tool is proposed to construct the basic model and the internal state model. Such HAZOP system is applied to analyze two kinds of processes, where the ability of the proposed system is verified. In addition, risk assessment support system is proposed to integrate safety design environment and assessment result to be used by other plants as well as to enable the underline plant to use other plants' information. This technique can be implemented using web-based safety information systems. (author)

  15. Assessing safety culture using RADAR matrix

    International Nuclear Information System (INIS)

    Mariscal-Saldana, M. a.; Garcia-Herrero, S.; Toca-Otero, A.

    2009-01-01

    Santa Maria de Garona nuclear power plant, in collaboration with Burgos University, has proceeded to conduct a pilot project aimed at seeing the possibilities for the RADAR (Results, Approach, Development, Assessment and review) logic of EFQM model, as a tool for self evaluation of Safety Culture in a nuclear power plant. In the work it has sought evidences of Safety culture implanted in the plant, and identify strengths and areas for improvement regarding this Culture. the score obtained by analyzing these strengths and areas for improvements has served to prioritize actions implemented. The nuclear power plant has been submitted voluntarily to the mission SCART (Safety Culture Assessment Review Team), an international review being done for the first time in the world at a plant in operation and the team of experts led by International Agency of Atomic Energy (IAEA) has identified this project as a good practice, an innovative process implemented in the plant, that must be transmitted to other plants. (Author) 10 refs

  16. Fewer can be More: Nuclear Safety and Security Culture Self-Assessment in the Hungarian Public Ltd. for Radioactive Waste Management

    International Nuclear Information System (INIS)

    Horváth, K.; Solymosi, M.; Vass, G.

    2016-01-01

    The Hungarian regulator and operators show strong commitment towards robust nuclear safety and security culture. The paper discusses the evolution and the basis of the regulation of Hungarian safety and security culture. Because of security considerations nuclear safety incidents have always received and for sure will receive more publicity than malicious acts. That is probably the main reason behind that mostly nuclear safety incidents influence the common beliefs. This kind of primacy is noticeable as well in regulations and also in practice. Although there is a strong connection nuclear safety and security culture, their relationship has not been researched for a long time. The paper also presents an already achieved, combined nuclear safety and security culture survey type assessment. Survey is a well known type of organizational culture self assessment. The applied methods, relationship between these two cultures and of course some difficulties of the process are summarized. The presented method is appropriate to combine different guidance and characteristics to measure different attitude in a single survey. The method in practice is shown through the nuclear safety and security culture assessment conducted at Hungarian Public Ltd. Of Radioactive Waste Management. (author)

  17. Economic evaluation in patient safety: a literature review of methods.

    Science.gov (United States)

    de Rezende, Bruna Alves; Or, Zeynep; Com-Ruelle, Laure; Michel, Philippe

    2012-06-01

    Patient safety practices, targeting organisational changes for improving patient safety, are implemented worldwide but their costs are rarely evaluated. This paper provides a review of the methods used in economic evaluation of such practices. International medical and economics databases were searched for peer-reviewed publications on economic evaluations of patient safety between 2000 and 2010 in English and French. This was complemented by a manual search of the reference lists of relevant papers. Grey literature was excluded. Studies were described using a standardised template and assessed independently by two researchers according to six quality criteria. 33 articles were reviewed that were representative of different patient safety domains, data types and evaluation methods. 18 estimated the economic burden of adverse events, 3 measured the costs of patient safety practices and 12 provided complete economic evaluations. Healthcare-associated infections were the most common subject of evaluation, followed by medication-related errors and all types of adverse events. Of these, 10 were selected that had adequately fulfilled one or several key quality criteria for illustration. This review shows that full cost-benefit/utility evaluations are rarely completed as they are resource intensive and often require unavailable data; some overcome these difficulties by performing stochastic modelling and by using secondary sources. Low methodological transparency can be a problem for building evidence from available economic evaluations. Investing in the economic design and reporting of studies with more emphasis on defining study perspectives, data collection and methodological choices could be helpful for strengthening our knowledge base on practices for improving patient safety.

  18. Development of the safety assessment technology for the radioactive waste disposal

    International Nuclear Information System (INIS)

    Kim, Chang Lak; Choi, Kwang Sub; Cho, Chan Hee; Lee, Myung Chan; Kim, Jhin Wung

    1992-03-01

    The major goal of this project is to develop a source-term model for the safety assessment of a low- and intermediate-level radioactive waste repository as follows: 1) estimation of the arising of low- and intermediate-level radioactive wastes, 2) development of inventory data base, 3) development of a source-term code for shallow-land disposal, and 4) improvement of the REPS source-term code for rock cavern type disposal developed already in 1990 and conservative safety assessment for an imaginary repository. In addition, the source of C-14 in the inventory is assessed by two methods: decontamination factor and scaling factor. The source-term code for shallow-land disposal include the following submodels: surface water penetration into the repository, concrete degradation, corrosion of container drums, leaching of radionuclides from waste forms, and migration of radionuclides from engineered disposal facility is estimated by this code. (Author)

  19. Safety assessment of smoke flavouring primary products by the European Food Safety Authority

    NARCIS (Netherlands)

    Theobald, A.; Arcella, D.; Carere, A.; Croera, C.; Engel, K.H.; Gott, D.; Gurtler, R.; Meier, D.; Pratt, I.; Rietjens, I.M.C.M.; Simon, R.; Walker, R.

    2012-01-01

    This paper summarises the safety assessments of eleven smoke flavouring primary products evaluated by the European Food Safety Authority (EFSA). Data on chemical composition, content of polyaromatic hydrocarbons and results of genotoxicity tests and subchronic toxicity studies are presented and

  20. The safety assessment of OPR-1000 nuclear power plant for station blackout accident applying the combined deterministic and probabilistic procedure

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Dong Gu, E-mail: littlewing@kins.re.kr [Korea Institute of Nuclear Safety, 62 Gwahak-ro, Yuseong-gu, Daejeon 305-338 (Korea, Republic of); Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Chang, Soon Heung [Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2014-08-15

    Highlights: • The combined deterministic and probabilistic procedure (CDPP) was proposed for safety assessment of the BDBAs. • The safety assessment of OPR-1000 nuclear power plant for SBO accident is performed by applying the CDPP. • By estimating the offsite power restoration time appropriately, the SBO risk is reevaluated. • It is concluded that the CDPP is applicable to safety assessment of BDBAs without significant erosion of the safety margin. - Abstract: Station blackout (SBO) is a typical beyond design basis accident (BDBA) and significant contributor to overall plant risk. The risk analysis of SBO could be important basis of rulemaking, accident mitigation strategy, etc. Recently, studies on the integrated approach of deterministic and probabilistic method for nuclear safety in nuclear power plants have been done, and among them, the combined deterministic and probabilistic procedure (CDPP) was proposed for safety assessment of the BDBAs. In the CDPP, the conditional exceedance probability obtained by the best estimate plus uncertainty method acts as go-between deterministic and probabilistic safety assessments, resulting in more reliable values of core damage frequency and conditional core damage probability. In this study, the safety assessment of OPR-1000 nuclear power plant for SBO accident was performed by applying the CDPP. It was confirmed that the SBO risk should be reevaluated by eliminating excessive conservatism in existing probabilistic safety assessment to meet the targeted core damage frequency and conditional core damage probability. By estimating the offsite power restoration time appropriately, the SBO risk was reevaluated, and it was finally confirmed that current OPR-1000 system lies in the acceptable risk against the SBO. In addition, it is concluded that the CDPP is applicable to safety assessment of BDBAs in nuclear power plants without significant erosion of the safety margin.

  1. Fire safety assessment of tunnel structures

    DEFF Research Database (Denmark)

    Gkoumas, Konstantinos; Giuliani, Luisa; Petrini, Francesco

    2011-01-01

    .g. structural and non structural, organizational, human behavior). This is even more truth for the fire safety design of such structures. Fire safety in tunnels is challenging because of the particular environment, bearing in mind also that a fire can occur in different phases of the tunnel’s lifecycle. Plans...... for upgrading fire safety provisions and tunnel management are also important for existing tunnels. In this study, following a brief introduction of issues regarding the above mentioned aspects, the structural performance of a steel rib for a tunnel infrastructure subject to fire is assessed by means...

  2. An approach for assessing ALWR passive safety system reliability

    International Nuclear Information System (INIS)

    Hake, T.M.

    1991-01-01

    Many advanced light water reactor designs incorporate passive rather than active safety features for front-line accident response. A method for evaluating the reliability of these passive systems in the context of probabilistic risk assessment has been developed at Sandia National Laboratories. This method addresses both the component (e.g. valve) failure aspect of passive system failure, and uncertainties in system success criteria arising from uncertainties in the system's underlying physical processes. These processes provide the system's driving force; examples are natural circulation and gravity-induced injection. This paper describes the method, and provides some preliminary results of application of the approach to the Westinghouse AP600 design

  3. An abnormal situation modeling method to assist operators in safety-critical systems

    International Nuclear Information System (INIS)

    Naderpour, Mohsen; Lu, Jie; Zhang, Guangquan

    2015-01-01

    One of the main causes of accidents in safety-critical systems is human error. In order to reduce human errors in the process of handling abnormal situations that are highly complex and mentally taxing activities, operators need to be supported, from a cognitive perspective, in order to reduce their workload, stress, and the consequent error rate. Of the various cognitive activities, a correct understanding of the situation, i.e. situation awareness (SA), is a crucial factor in improving performance and reducing errors. Despite the importance of SA in decision-making in time- and safety-critical situations, the difficulty of SA modeling and assessment means that very few methods have as yet been developed. This study confronts this challenge, and develops an innovative abnormal situation modeling (ASM) method that exploits the capabilities of risk indicators, Bayesian networks and fuzzy logic systems. The risk indicators are used to identify abnormal situations, Bayesian networks are utilized to model them and a fuzzy logic system is developed to assess them. The ASM method can be used in the development of situation assessment decision support systems that underlie the achievement of SA. The performance of the ASM method is tested through a real case study at a chemical plant. - Highlights: • Bayesian networks are applied to represent operators’ mental models when confront with abnormal situations. • A fuzzy logic system is used to resemble operators’ generating assessment results for every abnormal situation. • A virtual plant user interface and a prototype based on proposed method are developed to simulate a real case

  4. Assessment of dietary intake of flavouring substances within the procedure for their safety evaluation: advantages and limitations of estimates obtained by means of a per capita method.

    Science.gov (United States)

    Arcella, D; Leclercq, C

    2005-01-01

    The procedure for the safety evaluation of flavourings adopted by the European Commission in order to establish a positive list of these substances is a stepwise approach which was developed by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) and amended by the Scientific Committee on Food. Within this procedure, a per capita amount based on industrial poundage data of flavourings, is calculated to estimate the dietary intake by means of the maximised survey-derived daily intake (MSDI) method. This paper reviews the MSDI method in order to check if it can provide conservative intake estimates as needed at the first steps of a stepwise procedure. Scientific papers and opinions dealing with the MSDI method were reviewed. Concentration levels reported by the industry were compared with estimates obtained with the MSDI method. It appeared that, in some cases, these estimates could be orders of magnitude (up to 5) lower than those calculated considering concentration levels provided by the industry and regular consumption of flavoured foods and beverages. A critical review of two studies which had been used to support the statement that MSDI is a conservative method for assessing exposure to flavourings among high consumers was performed. Special attention was given to the factors that affect exposure at high percentiles, such as brand loyalty and portion sizes. It is concluded that these studies may not be suitable to validate the MSDI method used to assess intakes of flavours by European consumers due to shortcomings in the assumptions made and in the data used. Exposure assessment is an essential component of risk assessment. The present paper suggests that the MSDI method is not sufficiently conservative. There is therefore a clear need for either using an alternative method to estimate exposure to flavourings in the procedure or for limiting intakes to the levels at which the safety was assessed.

  5. United States program for the safety assessment of geologic disposal of commercial radioactive wastes

    International Nuclear Information System (INIS)

    Claiborne, H.C.

    1977-01-01

    The safe disposal of commercial radioactive wastes in deep geologic formations is the goal of the National Waste Terminal Storage (NWTS) Program. A comprehensive safety assessment program has been established which will proceed on a schedule consistent with the start-up of two waste repositories in late 1985. Safety assessment begins with selection of a disposal site; that is, all geologic and hydrologic factors must indicate long-term stability of the formation and prospective isolation of wastes from circulating around waters for hundreds of thousands of years. The long-term stability of each site must be demonstrated by sophisticated rock mechanics analyses. To help provide answers on the mechanism and consequences of an unlikely breach in the integrity of the repository, a Waste Isolation Safety Assessment Program (WISAP) is being sponsored at the Battelle Pacific Northwest Laboratories. Methods and data necessary to characterize the safety of generic geological waste disposal concepts, which are to be applied in the assessment of specific sties, will be developed. Other long-term safety-related studies that complement WISAP are in progress, for example, borehole plugging, salt dissolutioning, and salt transport in vertical boreholes. Requirements for licensing are in the process of being formulated by the NRC

  6. Safety management system needs assessment.

    Science.gov (United States)

    2016-04-01

    The safety of the traveling public is critical as each year there are approximately 200 highway fatalities in Nebraska and numerous crash injuries. The objective of this research was to conduct a needs assessment to identify the requirements of a sta...

  7. Criticality safety evaluations - a {open_quotes}stalking horse{close_quotes} for integrated safety assessment

    Energy Technology Data Exchange (ETDEWEB)

    Williams, R.A. [Westinghouse Electric Corp., Columbia, SC (United States)

    1995-12-31

    The Columbia Fuel Fabrication Facility of the Westinghouse Commercial Nuclear Fuel Division manufactures low-enriched uranium fuel and associated components for use in commercial pressurized water power reactors. To support development of a comprehensive integrated safety assessment (ISA) for the facility, as well as to address increasing U.S. Nuclear Regulatory Commission (NRC) expectations regarding such a facility`s criticality safety assessments, a project is under way to complete criticality safety evaluations (CSEs) of all plant systems used in processing nuclear materials. Each CSE is made up of seven sections, prepared by a multidisciplinary team of process engineers, systems engineers, safety engineers, maintenance representatives, and operators. This paper provides a cursory outline of the type of information presented in a CSE.

  8. A safety assessment methodology applied to CNS/ATM-based air traffic control system

    Energy Technology Data Exchange (ETDEWEB)

    Vismari, Lucio Flavio, E-mail: lucio.vismari@usp.b [Safety Analysis Group (GAS), School of Engineering at University of Sao Paulo (Poli-USP), Av. Prof. Luciano Gualberto, Trav.3, n.158, Predio da Engenharia de Eletricidade, Sala C2-32, CEP 05508-900, Sao Paulo (Brazil); Batista Camargo Junior, Joao, E-mail: joaocamargo@usp.b [Safety Analysis Group (GAS), School of Engineering at University of Sao Paulo (Poli-USP), Av. Prof. Luciano Gualberto, Trav.3, n.158, Predio da Engenharia de Eletricidade, Sala C2-32, CEP 05508-900, Sao Paulo (Brazil)

    2011-07-15

    In the last decades, the air traffic system has been changing to adapt itself to new social demands, mainly the safe growth of worldwide traffic capacity. Those changes are ruled by the Communication, Navigation, Surveillance/Air Traffic Management (CNS/ATM) paradigm , based on digital communication technologies (mainly satellites) as a way of improving communication, surveillance, navigation and air traffic management services. However, CNS/ATM poses new challenges and needs, mainly related to the safety assessment process. In face of these new challenges, and considering the main characteristics of the CNS/ATM, a methodology is proposed at this work by combining 'absolute' and 'relative' safety assessment methods adopted by the International Civil Aviation Organization (ICAO) in ICAO Doc.9689 , using Fluid Stochastic Petri Nets (FSPN) as the modeling formalism, and compares the safety metrics estimated from the simulation of both the proposed (in analysis) and the legacy system models. To demonstrate its usefulness, the proposed methodology was applied to the 'Automatic Dependent Surveillance-Broadcasting' (ADS-B) based air traffic control system. As conclusions, the proposed methodology assured to assess CNS/ATM system safety properties, in which FSPN formalism provides important modeling capabilities, and discrete event simulation allowing the estimation of the desired safety metric.

  9. A safety assessment methodology applied to CNS/ATM-based air traffic control system

    International Nuclear Information System (INIS)

    Vismari, Lucio Flavio; Batista Camargo Junior, Joao

    2011-01-01

    In the last decades, the air traffic system has been changing to adapt itself to new social demands, mainly the safe growth of worldwide traffic capacity. Those changes are ruled by the Communication, Navigation, Surveillance/Air Traffic Management (CNS/ATM) paradigm , based on digital communication technologies (mainly satellites) as a way of improving communication, surveillance, navigation and air traffic management services. However, CNS/ATM poses new challenges and needs, mainly related to the safety assessment process. In face of these new challenges, and considering the main characteristics of the CNS/ATM, a methodology is proposed at this work by combining 'absolute' and 'relative' safety assessment methods adopted by the International Civil Aviation Organization (ICAO) in ICAO Doc.9689 , using Fluid Stochastic Petri Nets (FSPN) as the modeling formalism, and compares the safety metrics estimated from the simulation of both the proposed (in analysis) and the legacy system models. To demonstrate its usefulness, the proposed methodology was applied to the 'Automatic Dependent Surveillance-Broadcasting' (ADS-B) based air traffic control system. As conclusions, the proposed methodology assured to assess CNS/ATM system safety properties, in which FSPN formalism provides important modeling capabilities, and discrete event simulation allowing the estimation of the desired safety metric.

  10. A structured observational method to assess dermal exposure to manufactured nanoparticles: DREAM as an initial assessment tool

    NARCIS (Netherlands)

    Duuren-Stuurman, B. van; Pelzer, J.; Moehlmann, C.; Berges, M.; Bard, D.; Wake, D.; Mark, D.; Jankowska, E.; Brouwer, D.

    2010-01-01

    Preliminary results of inventories of exposure scenarios for nanomaterials have indicated possible dermal exposure. Within the NANOSH project focused on occupational safety and health aspects of nanotechnology a shortened version of the observational DeRmal Exposure AssessMent (DREAM) method was

  11. Assessment of Health, Safety and Environmental Risks of Zahedan City Gasoline Stations

    Directory of Open Access Journals (Sweden)

    S. Y. Far

    2018-04-01

    Full Text Available The purpose of this study was to assess the risk and determine the health, safety and environmental status of fuel stations in Zahedan. In this study, failure mode and effects analysis (FMEA method was used for risk assessment in accordance with the HSE guidelines, national and international standards and laws. In this cross-sectional study, 2 governmental stations and 6 active private stations were evaluated after the necessary coordination with the relevant units. As a result of risk assessment, 27 health risks, 55 safety risks and 22 environmental risks were identified. From among all the identified risks, 67 risks had a Risk Priority Number (RPN of less than 91, 31 risks had an RPN ranging between 91 and 201, and 6 risks had an RPN of over 201. The findings of the study indicated that compliance with the HSE requirements was 51.85%, in the area of health, 47.57% in the area of safety and 27.45% in the environmental area. Overall compliance with the HSE requirements was 42.54%. In order to distribute fuel considering health, reducing risk and increasing compliance with the requirements for safety improvement, health and environmental conditions of fuel supplies are essential.

  12. Additional safety assessment of ITER - Addition safety investigation of the INB ITER

    International Nuclear Information System (INIS)

    2012-01-01

    This assessment aims at re-assessing safety margins in the light of events which occurred in Fukushima Daiichi, i.e. extreme natural events challenging the safety of installations. After a presentation of some characteristics of the ITER installation (location, activities, buildings, premise detritiation systems, electric supply, handling means, radioactive materials, chemical products, nuclear risks, specific risks), the report addresses the installation robustness by identifying cliff-edge effect risks which can be related to a loss of confinement of radioactive materials, explosions, a significant increase of exposure level, a possible effect on water sheets, and so on. The next part addresses the various aspects related to a seismic risk: installation sizing (assessment methodology, seismic risk characterization in Cadarache), sizing protection measures, installation compliance, and margin assessment. External flooding is the next addressed risk: installation sizing with respect to this specific risk, protection measures, installation compliance, margin assessment, and studied additional measures. Other extreme natural phenomena are considered (meteorological conditions, earthquake and flood) which may have effects on other installations (dam, canal). Then, the report addresses technical risks like the loss of electric supplies and cooling systems, the way a crisis is managed in terms of technical and human means and organization in different typical accidental cases. Subcontracting practices are also discussed. A synthesis proposes an overview of this additional safety assessment and discusses the impact which could have additional measures which could be implemented

  13. Dependability Assessment by Static Analysis of Software Important to Nuclear Power Plant Safety

    Energy Technology Data Exchange (ETDEWEB)

    Ourghanlian, Alain [EDF Lab, Chatou (France)

    2014-08-15

    We describe a practical experimentation of safety assessment of safety-critical software used in Nuclear Power Plants. To enhance the credibility of safety assessments and to optimize safety justification costs, Electricite de France (EDF) investigates the use of methods and tools for source code semantic analysis, to obtain indisputable evidence and help assessors focus on the most critical issues. EDF has been using the PolySpace tool for more than 10 years. Today, new industrial tools, based on the same formal approach, Abstract Interpretation, are available. Practical experimentation with these new tools shows that the precision obtained on one of our shutdown systems software is very significantly improved. In a first part, we present the analysis principles of the tools used in our experimentation. In a second part, we present the main characteristics of protection-system software, and why these characteristics are well adapted for the new analysis tools. In the last part, we present an overview of the results and the limitation of the tools.

  14. Developing an OMERACT Core Outcome Set for Assessing Safety Components in Rheumatology Trials

    DEFF Research Database (Denmark)

    Klokker, Louise; Tugwell, Peter; Furst, Daniel E

    2016-01-01

    in such COS. The Outcome Measures in Rheumatology (OMERACT) Filter 2.0 emphasizes the importance of measuring harms. The Safety Working Group was reestablished at the OMERACT 2016 with the objective to develop a COS for assessing safety components in trials across rheumatologic conditions. METHODS: The safety......OBJECTIVE: Failure to report harmful outcomes in clinical research can introduce bias favoring a potentially harmful intervention. While core outcome sets (COS) are available for benefits in randomized controlled trials in many rheumatic conditions, less attention has been paid to safety...... that patients consider relevant so that they will be able to make informed decisions. CONCLUSION: The OMERACT Safety Working Group will advance the work previously done within OMERACT using a new patient-driven approach....

  15. Methods and Effects of Safety Enhancement in Korean PSR

    International Nuclear Information System (INIS)

    Kim, Young Gab; Park, Jong Woon

    2009-01-01

    Periodic Safety Review (PSR) is a comprehensive study on a nuclear power plant safety, taking into account aspects such as operational history, ageing, safety analyses and advances in code and standards since the time of construction. In Korea, PSRs have been performed for 20 units and have been effectively used to obtain an overall view of actual plant safety to determine reasonable and practical modifications that should be made in order to obtain a higher level of safety approaching that of modern plants. Among many safety enhancements achieved from Korean PSRs, new safety analyses are the important methods to confirm plant safety by increasing safety margin for specific safety issues. Methods and effects of safety enhancements applied in Korean PSRs are reviewed in this paper in light of new safety analyses to obtain additional safety margins

  16. Swedish REGULATORY APPROACH TO SAFETY Assessment AND SEVERE ACCIDENT MANAGEMENT

    International Nuclear Information System (INIS)

    Frid, W.; Sandervaag, O.

    1997-01-01

    The Swedish regulatory approach to safety assessment and severe accident management is briefly described. The safety assessment program, which focuses on prevention of incidents and accidents, has three main components: periodic safety reviews, probabilistic safety analysis, and analysis of postulated disturbances and accident progression sequences. Management and man-technology-organisation issues, as well as inspections, play a key role in safety assessment. Basis for severe accident management were established by the Government decisions in 1981 and 1986. By the end of 1988, the severe accident mitigation systems and emergency operating procedures were implemented at all Swedish reactors. The severe accident research has continued after 1988 for further verification of the protection provided by the systems and reduction of remaining uncertainties in risk dominant phenomena

  17. Complementary assessment of the safety of French nuclear power plants

    International Nuclear Information System (INIS)

    Camarcat, N.; Pouget-Abadie, X.

    2011-01-01

    As an immediate consequence of the Fukushima accident the French nuclear safety Authority (ASN) asked EDF to perform a complementary safety assessment for each nuclear power plant dealing with 3 points: 1) the consequences of exceptional natural disasters, 2) the consequences of total loss of electrical power, and 3) the management of emergency situations. The safety margin has to be assessed considering 3 main points: first a review of the conformity to the initial safety requirements, secondly the resistance to events overdoing what the facility was designed to stand for, and the feasibility of any modification susceptible to improve the safety of the facility. This article details the specifications of such assessment, the methodology followed by EDF, the task organization and the time schedule. (A.C.)

  18. Applicability and feasibility of systematic review for performing evidence-based risk assessment in food and feed safety

    DEFF Research Database (Denmark)

    Aiassa, E.; Higgins, J.P.T.; Frampton, G. K.

    2015-01-01

    for answering questions in health care, and can be implemented to minimise biases in food and feed safety risk assessment. However, no methodological frameworks exist for refining risk assessment multi-parameter models into questions suitable for systematic review, and use of meta-analysis to estimate all......Food and feed safety risk assessment uses multi-parameter models to evaluate the likelihood of adverse events associated with exposure to hazards in human health, plant health, animal health, animal welfare and the environment. Systematic review and meta-analysis are established methods...... parameters in the risk model. This approach to planning and prioritising systematic review seems to have useful implications for producing evidence-based food and feed safety risk assessment....

  19. A comparison of integrated safety analysis and probabilistic risk assessment

    International Nuclear Information System (INIS)

    Damon, Dennis R.; Mattern, Kevin S.

    2013-01-01

    approaches are enumerated and their potential use in regulating fuel cycle safety is discussed. A critical evaluation of the application to FCFs including, hazards, completeness, adequacy, interactions, common causes, and personnel is performed. The application of both methodologies to various inspection and assessment tools is discussed. The regulatory advantages of the PRA, namely, the ability to quantify uncertainty and provide importance measures, are provided. The paper concludes that, while the ISA method is sufficient to establish an adequate safety basis, PRA is able to provide additional insights such as risk significance, uncertainty assessment, and prioritisation of safety features. (authors)

  20. Application of probabilistic safety assessment for Macedonian electric power system

    International Nuclear Information System (INIS)

    Kancev, D.; Causevski, A.; Cepin, M.; Volkanovski, A.

    2007-01-01

    Due to the complex and integrated nature of a power system, failures in any part of the system can cause interruptions, which range from inconveniencing a small number of local residents to a major and widespread catastrophic disruption of supply known as blackout. The objective of the paper is to show that the methods and tools of probabilistic safety assessment are applicable for assessment and improvement of real power systems. The method used in this paper is developed based on the fault tree analysis and is adapted for the power system reliability analysis. A particular power system i.e. the Macedonian power system is the object of the analysis. The results show that the method is suitable for application of real systems. The reliability of Macedonian power system assumed as the static system is assessed. The components, which can significantly impact the power system are identified and analysed in more details. (author)

  1. A reliability assessment methodology for the VHTR passive safety system

    International Nuclear Information System (INIS)

    Lee, Hyungsuk; Jae, Moosung

    2014-01-01

    The passive safety system of a VHTR (Very High Temperature Reactor), which has recently attracted worldwide attention, is currently being considered for the design of safety improvements for the next generation of nuclear power plants in Korea. The functionality of the passive system does not rely on an external source of an electrical support system, but on the intelligent use of natural phenomena. Its function involves an ultimate heat sink for a passive secondary auxiliary cooling system, especially during a station blackout such as the case of the Fukushima Daiichi reactor accidents. However, it is not easy to quantitatively evaluate the reliability of passive safety for the purpose of risk analysis, considering the existing active system failure since the classical reliability assessment method cannot be applied. Therefore, we present a new methodology to quantify the reliability based on reliability physics models. This evaluation framework is then applied to of the conceptually designed VHTR in Korea. The Response Surface Method (RSM) is also utilized for evaluating the uncertainty of the maximum temperature of nuclear fuel. The proposed method could contribute to evaluating accident sequence frequency and designing new innovative nuclear systems, such as the reactor cavity cooling system (RCCS) in VHTR to be designed and constructed in Korea.

  2. Human reliability in probabilistic safety assessments

    International Nuclear Information System (INIS)

    Nunez Mendez, J.

    1989-01-01

    Nowadays a growing interest in medioambiental aspects is detected in our country. It implies an assessment of the risk involved in the industrial processess and installations in order to determine if those are into the acceptable limits. In these safety assessments, among which PSA (Probabilistic Safety Assessments), can be pointed out the role played by the human being in the system is one of the more relevant subjects. (This relevance has been demostrated in the accidents happenned). However in Spain there aren't manuals specifically dedicated to asses the human contribution to risk in the frame of PSAs. This report aims to improve this situation providing: a) a theoretical background to help the reader in the understanding of the nature of the human error, b) a guide to carry out a Human Reliability Analysis and c) a selected overwiev of the techniques and methodologies currently applied in this area. (Author)

  3. Probabilistic assessment of NPP safety under aircraft impact

    International Nuclear Information System (INIS)

    Birbraer, A.N.; Roleder, A.J.; Arhipov, S.B.

    1999-01-01

    Methodology of probabilistic assessment of NPP safety under aircraft impact is described below. The assessment is made taking into account not only the fact of aircraft fall onto the NPP building, but another casual parameters too, namely an aircraft class, velocity and mass, as well as point and angle of its impact with the building structure. This analysis can permit to justify the decrease of the required structure strength and dynamic loads on the NPP equipment. It can also be especially useful when assessing the safety of existing NPP. (author)

  4. Nirex Safety Assessment Research Programme bibliography, 1990

    International Nuclear Information System (INIS)

    Cooper, M.J.

    1990-10-01

    This bibliography lists reports and papers written as part of the Nirex Safety Assessment Research Programme, which is concerned with disposal of low-level and intermediate-level waste (LLW and ILW) and associated radiological assessments. (author)

  5. Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

    Directory of Open Access Journals (Sweden)

    Falakh Fajrul

    2018-01-01

    Full Text Available Water Treatment Plant (WTP is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

  6. Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

    Science.gov (United States)

    Falakh, Fajrul; Setiani, Onny

    2018-02-01

    Water Treatment Plant (WTP) is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

  7. Understanding and assessing safety culture

    International Nuclear Information System (INIS)

    Dalling, Ian

    1997-01-01

    The 'Dalling' integrated model of organisational performance is introduced and described. A principal element of this model is culture, which is dynamically contrasted with the five other interacting critical elements, which comprise: the management system, the knowledge base, corporate leadership, stakeholders and consciousness. All six of these principal driving elements significantly influence health, safety, environmental, security, or any other aspect of organisational performance. It is asserted that the elements of organisational performance must be clearly defined and understood if meaningful measurements are to be carried out and sustained progress made in improving the knowledge of organisational performance. AEA Technology's safety culture research programme is then described together with the application of a safety culture assessment tool to organisations in the nuclear, electricity, transport, and oil and gas industries, both within and outside of the United Kingdom. (author)

  8. Health economics and outcomes methods in risk-based decision-making for blood safety

    NARCIS (Netherlands)

    Custer, Brian; Janssen, Mart P.

    2015-01-01

    Analytical methods appropriate for health economic assessments of transfusion safety interventions have not previously been described in ways that facilitate their use. Within the context of risk-based decision-making (RBDM), health economics can be important for optimizing decisions among competing

  9. Quantification of human reliability in probabilistic safety assessment

    International Nuclear Information System (INIS)

    Hirschberg, S.; Dankg, Vinh N.

    1996-01-01

    Human performance may substantially influence the reliability and safety of complex technical systems. For this reason, Human Reliability Analysis (HRA) constitutes an important part of Probabilistic Safety Assessment (PSAs) or Quantitative Risk Analyses (QRAs). The results of these studies as well as analyses of past accidents and incidents clearly demonstrate the importance of human interactions. The contribution of human errors to the core damage frequency (CDF), as estimated in the Swedish nuclear PSAs, are between 15 and 88%. A survey of the FRAs in the Swiss PSAs shows that also for the Swiss nuclear power plants the estimated HE contributions are substantial (49% of the CDF due to internal events in the case of Beznau and 70% in the case of Muehleberg; for the total CDF, including external events, 25% respectively 20%). Similar results can be extracted from the PSAs carried out for French, German, and US plants. In PSAs or QRAs, the adequate treatment of the human interactions with the system is a key to the understanding of accident sequences and their relative importance to overall risk. The main objectives of HRA are: first, to ensure that the key human interactions are systematically identified and incorporated into the safety analysis in a traceable manner, and second, to quantify the probabilities of their success and failure. Adopting a structured and systematic approach to the assessment of human performance makes it possible to provide greater confidence that the safety and availability of human-machine systems is not unduly jeopardized by human performance problems. Section 2 discusses the different types of human interactions analysed in PSAs. More generally, the section presents how HRA fits in the overall safety analysis, that is, how the human interactions to be quantified are identified. Section 3 addresses the methods for quantification. Section 4 concludes the paper by presenting some recommendations and pointing out the limitations of the

  10. The use of probabilistic safety assessments for improving nuclear safety in Europe

    International Nuclear Information System (INIS)

    Birkhofer, A.

    1992-01-01

    The political changes in Europe broadened the scope of international nuclear safety matters considerably. The Western world started to receive reliable and increasingly detailed information on Eastern European nuclear technology and took note of a broad range of technical and administrative problems relevant for nuclear safety in these countries. Reunification made Germany a focus of information exchange on these matters. Here, cooperation with the former German Democratic Republic and with other Eastern European countries as well as safety analyses of Soviet-built nuclear power plants started rather early. Meanwhile, these activities are progressing toward all-European cooperation in the nuclear safety sector. This cooperation includes the use of probabilistic safety assessments (PSAs) addressing applications in both Western and Eastern Europe as well as the further development of this methodology in a converging Europe

  11. Risk assessment of safety data link and network communication in digital safety feature control system of nuclear power plant

    International Nuclear Information System (INIS)

    Lee, Sang Hun; Son, Kwang Seop; Jung, Wondea; Kang, Hyun Gook

    2017-01-01

    Highlights: • Safety data communication risk assessment framework and quantitative scheme were proposed. • Fault-tree model of ESFAS unavailability due to safety data communication failure was developed. • Safety data link and network risk were assessed based on various ESF-CCS design specifications. • The effect of fault-tolerant algorithm reliability of safety data network on ESFAS unavailability was assessed. - Abstract: As one of the safety-critical systems in nuclear power plants (NPPs), the Engineered Safety Feature-Component Control System (ESF-CCS) employs safety data link and network communication for the transmission of safety component actuation signals from the group controllers to loop controllers to effectively accommodate various safety-critical field controllers. Since data communication failure risk in the ESF-CCS has yet to be fully quantified, the ESF-CCS employing data communication systems have not been applied in NPPs. This study therefore developed a fault tree model to assess the data link and data network failure-induced unavailability of a system function used to generate an automated control signal for accident mitigation equipment. The current aim is to provide risk information regarding data communication failure in a digital safety feature control system in consideration of interconnection between controllers and the fault-tolerant algorithm implemented in the target system. Based on the developed fault tree model, case studies were performed to quantitatively assess the unavailability of ESF-CCS signal generation due to data link and network failure and its risk effect on safety signal generation failure. This study is expected to provide insight into the risk assessment of safety-critical data communication in a digitalized NPP instrumentation and control system.

  12. Watershed safety and quality control by safety threshold method

    Science.gov (United States)

    Da-Wei Tsai, David; Mengjung Chou, Caroline; Ramaraj, Rameshprabu; Liu, Wen-Cheng; Honglay Chen, Paris

    2014-05-01

    Taiwan was warned as one of the most dangerous countries by IPCC and the World Bank. In such an exceptional and perilous island, we would like to launch the strategic research of land-use management on the catastrophe prevention and environmental protection. This study used the watershed management by "Safety Threshold Method" to restore and to prevent the disasters and pollution on island. For the deluge prevention, this study applied the restoration strategy to reduce total runoff which was equilibrium to 59.4% of the infiltration each year. For the sediment management, safety threshold management could reduce the sediment below the equilibrium of the natural sediment cycle. In the water quality issues, the best strategies exhibited the significant total load reductions of 10% in carbon (BOD5), 15% in nitrogen (nitrate) and 9% in phosphorus (TP). We found out the water quality could meet the BOD target by the 50% peak reduction with management. All the simulations demonstrated the safety threshold method was helpful to control the loadings within the safe range of disasters and environmental quality. Moreover, from the historical data of whole island, the past deforestation policy and the mistake economic projects were the prime culprits. Consequently, this study showed a practical method to manage both the disasters and pollution in a watershed scale by the land-use management.

  13. A novel safety assessment strategy applied to non-selective extracts.

    Science.gov (United States)

    Koster, Sander; Leeman, Winfried; Verheij, Elwin; Dutman, Ellen; van Stee, Leo; Nielsen, Lene Munch; Ronsmans, Stefan; Noteborn, Hub; Krul, Lisette

    2015-06-01

    A main challenge in food safety research is to demonstrate that processing of foodstuffs does not lead to the formation of substances for which the safety upon consumption might be questioned. This is especially so since food is a complex matrix in which the analytical detection of substances, and consequent risk assessment thereof, is difficult to determine. Here, a pragmatic novel safety assessment strategy is applied to the production of non-selective extracts (NSEs), used for different purposes in food such as for colouring purposes, which are complex food mixtures prepared from reference juices. The Complex Mixture Safety Assessment Strategy (CoMSAS) is an exposure driven approach enabling to efficiently assess the safety of the NSE by focussing on newly formed substances or substances that may increase in exposure during the processing of the NSE. CoMSAS enables to distinguish toxicologically relevant from toxicologically less relevant substances, when related to their respective levels of exposure. This will reduce the amount of work needed for identification, characterisation and safety assessment of unknown substances detected at low concentration, without the need for toxicity testing using animal studies. In this paper, the CoMSAS approach has been applied for elderberry and pumpkin NSEs used for food colouring purposes. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Safety assessment technology on the free drop impact and puncture analysis of the cask for radioactive material transport

    International Nuclear Information System (INIS)

    Lee, Dew Hey; Lee, Young Shin; Ryu, Chung Hyun; Kim, Hyun Su; Lee, Ho Chul; Hong, Song Jin; Choi, Young Jin; Lee, Jae Hyung; Na, Jae Yun

    2001-03-01

    In this study, the regulatory condition and analysis condition is analyzed for the free drop and puncture impact analysis to develop the safety assessment technology. Impact analysis is performed with finite element method which is one of the many analysis methods of the shipping cask. LS-DYNA3D and ABAQUS is suitable for the free drop and the puncture impact analysis of the shipping cask. For the analysis model, the KSC-4 that is the shipping cask to transport spent nuclear fuel is investigated. The results of both LS-DYNA3D and ABAQUS is completely corresponded. And The integrity of the shipping cask is verified. Using this study, the reliable safety assessment technology is supplied to the staff. The efficient and reliable regulatory tasks is performed using the standard safety assessment technology

  15. Safety assessment technology on the free drop impact and puncture analysis of the cask for radioactive material transport

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dew Hey [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Lee, Young Shin; Ryu, Chung Hyun; Kim, Hyun Su; Lee, Ho Chul; Hong, Song Jin; Choi, Young Jin; Lee, Jae Hyung; Na, Jae Yun [Chungnam National Univ., Taejon (Korea, Republic of)

    2001-03-15

    In this study, the regulatory condition and analysis condition is analyzed for the free drop and puncture impact analysis to develop the safety assessment technology. Impact analysis is performed with finite element method which is one of the many analysis methods of the shipping cask. LS-DYNA3D and ABAQUS is suitable for the free drop and the puncture impact analysis of the shipping cask. For the analysis model, the KSC-4 that is the shipping cask to transport spent nuclear fuel is investigated. The results of both LS-DYNA3D and ABAQUS is completely corresponded. And The integrity of the shipping cask is verified. Using this study, the reliable safety assessment technology is supplied to the staff. The efficient and reliable regulatory tasks is performed using the standard safety assessment technology.

  16. Safety assessment of primary system components at the USNRC

    Energy Technology Data Exchange (ETDEWEB)

    Serpan, C Z; Chen, C Y; Taboada, A

    1988-12-31

    This document deals with the safety assessment in nuclear reactor components at the USNRC. The USNRC regulations and requirements concerning nuclear reactor design and operations are presented, together with guides and standards which describe how the actions should be implemented. The safety assessment relies on fracture analysis and Non Destructive Examination (NDE). (TEC).

  17. An Assessment of SKB's Performance Assessment Calculations in the Interim Main Report for the Safety Assessment SR-Can

    International Nuclear Information System (INIS)

    Maul, Philip; Robinson, Peter

    2005-03-01

    properties of the buffer and its longer-term performance. 3. The underlying methods for considering radionuclide transport are little changed from SR 97, although useful improvements have been made in some areas. The approach taken means that additional calculations are needed to address issues related to the evolution of the system with time. Whether the overall methodology will enable a comprehensive assessment to be undertaken in practice can only be judged when the full SR-Can assessment is available. 4. The documentation of the models used in PA calculations often relies on references going back over a period of twenty years updated by model validity documents for each model. The production of a single up-to-date supporting document giving full details of the models used would greatly assist the transparency of the safety case presentation. 5. The consideration of conceptual uncertainties in the supporting Process Report is restricted to the buffer. This restriction greatly limits the usefulness of the Process Report in providing information on the overall methodology. For example, it is not clear whether the approach taken for the buffer will be satisfactory for addressing conceptual model uncertainties in the geosphere. 6. SKB have not presented any deterministic PA calculations. Without these it is often difficult to understand fully the probabilistic calculations that are presented, although independent AMBER calculations have been able to reproduce the key features of these calculations. It is suggested that deterministic calculations should be part of SR-Can safety assessment. 7. It has been possible to reproduce the key features of the interim SR-Can probabilistic calculations with AMBER, although there remain uncertainties deriving from the way that SKB have modelled the U-238 decay chain in different parts of the system. 8. A full reproduction of the interim SR-Can calculations was not possible because only summary data from hydrogeological calculations are

  18. Study of the cost-benefit analysis method for safety. Meeting of the Permanent Group in charge of nuclear reactors on the 5 July 2007

    International Nuclear Information System (INIS)

    2007-07-01

    After a recall of the history of the issue of third decennial visit of the 900 MW reactors, of the IRSN preliminary analysis, of elements given to the Permanent Group, of requests made by the ASN, and a presentation of the analysis performed by the IRSN, this large report presents the cost-benefit analysis method and its potential applications (principle, cost assessment, safety assessment, examples) and reports international experience gained in this area: the risk-informed approach (within the IAEA, in the USA, France and other European countries, the specific cost-benefit approach), existing cost-benefit type methods (comparison between methods used in the USA, in France and in Canada), and monetary assessment of accidents. It reports the application of the cost-benefit method for safety and its limitations, and then its application to modifications which have been implemented after safety re-examinations. It discusses the use of level 1 and 2 safety probabilistic studies, and reports the use of a cost-benefit method for safety within the frame of safety re-examinations

  19. An approach for assessing ALWR passive safety system reliability

    International Nuclear Information System (INIS)

    Hake, T.M.

    1991-01-01

    Many of the advanced light water reactor (ALWR) concepts proposed for the next generation of nuclear power plants rely on passive rather than active systems to perform safety functions. Despite the reduced redundancy of the passive systems as compared to active systems in current plants, the assertion is that the overall safety of the plant is enhanced due to the much higher expected reliability of the passive systems. In order to investigate this assertion, a study is being conducted at Sandia National Laboratories to evaluate the reliability of ALWR passive safety features in the context of probabilistic risk assessment (PRA). The purpose of this paper is to provide a brief overview of the approach to this study. The quantification of passive system reliability is not as straightforward as for active systems, due to the lack of operating experience, and to the greater uncertainty in the governing physical phenomena. Thus, the adequacy of current methods for evaluating system reliability must be assessed, and alternatives proposed if necessary. For this study, the Westinghouse Advanced Passive 600 MWe reactor (AP600) was chosen as the advanced reactor for analysis, because of the availability of AP600 design information. This study compares the reliability of AP600 emergency cooling system with that of corresponding systems in a current generation reactor

  20. Operational safety review programmes for nuclear power plants. Guidelines for assessment

    International Nuclear Information System (INIS)

    2002-01-01

    The IAEA has been offering the Operational Safety Review Team (OSART) programme to provide advice and assistance to Member States in enhancing the operational safety of nuclear power plants (NPPs). Simultaneously, the IAEA has encouraged self-assessment and review by Member States of their own nuclear power plants to continuously improve nuclear safety. Currently, some utilities have been implementing safety review programmes to independently review their own plants. Corporate or national operational safety review programmes may be compliance or performance based. Successful utilities have found that both techniques are necessary to provide assurance that (i) as a minimum the NPP meets specific corporate and legal requirements and (ii) management at the NPP is encouraged to pursue continuous improvement principles. These programmes can bring nuclear safety benefits to the plants and utilities. The IAEA has conducted two pilot missions to assess the effectiveness of the operational review programme. Based on these missions and on the experience gained during OSART missions, this document has been developed to provide guidance on and broaden national/corporate safety review programmes in Member States, and to assist in maximizing their benefits. These guidelines are intended primarily for the IAEA team to conduct assessment of a national/corporate safety review programme. However, this report may also be used by a country or utility to establish its own national/corporate safety review programme. The guidelines may likewise be used for self-assessment or for establishing a baseline when benchmarking other safety review programmes. This report consists of four parts. Section 2 addresses the planning and preparation of an IAEA assessment mission and Sections 3 and 4 deal with specific guidelines for conducting the assessment mission itself

  1. Flamanville 3 EPR, Safety Assessment and On-site Inspections

    International Nuclear Information System (INIS)

    Piedagnel, Corinne; Tarallo, Francois; Monnot, Bernard

    2011-01-01

    As a Technical Support Organisation of the French Safety Authority (ASN), the IRSN carries out the safety assessment of EPR project design and participates in the ASN inspections performed at the construction site and in factories. The design assessment consists in defining the safety functions which should be ensured by civil structures, evaluating the EPR Technical Code for Civil works (ETC-C) in which EdF has defined design criteria and construction rules, and carrying out a detailed assessment of a selection of safety-related structures. Those detailed assessments do not consist of a technical control but of an analysis whose objectives are to ensure that design and demonstrations are robust, in accordance with safety and regulatory rules. Most assessments led IRSN to ask EdF to provide additional justification sometimes involving significant modifications. In the light of those complementary justifications and modifications, IRSN concluded that assessments carried out on design studies were globally satisfactory. The participation of IRSN to the on-site inspections led by ASN is a part of the global control of the compliance of the reactor with its safety objectives. For that purpose IRSN has defined a methodology and an inspection program intended to ASN: based on safety functions associated with civil works (confinement and resistance to aggressions), the corresponding behaviour requirements are identified and linked to a list of main civil works elements. During the inspections, deviations to the project's technical specifications or to the rules of the art were pointed out by IRSN. Those deviations cover various items, such as concrete fabrication, concrete pouring methodology, lack of reinforcement in some structures, unadapted welding procedures of the containment leak-tight steel liner and unsatisfactory treatment of concreting joints. The analysis of those problems has revealed flaws in the organisation of the contractors teams together with an

  2. Prospects for probabilistic safety assessment

    International Nuclear Information System (INIS)

    Hirschberg, S.

    1992-01-01

    This article provides some reflections on future developments of Probabilistic Safety Assessment (PSA) in view of the present state of the art and evaluates current trends in the use of PSA for safety management. The main emphasis is on Level 1 PSA, although Level 2 aspects are also highlighted to some extent. As a starting point, the role of PSA is outlined from a historical perspective, demonstrating the rapid expansion of the uses of PSA. In this context the wide spectrum of PSA applications and the associated benefits to the users are in focus. It should be kept in mind, however, that PSA, in spite of its merits, is not a self-standing safety tool. It complements deterministic analysis and thus improves understanding and facilitating prioritization of safety issues. Significant progress in handling PSA limitations - such as reliability data, common-cause failures, human interactions, external events, accident progression, containment performance, and source-term issues - is described. This forms a background for expected future developments of PSA. Among the most important issues on the agenda for the future are PSA scope extensions, methodological improvements and computer code advancements, and full exploitation of the potential benefits of applications to operational safety management. Many PSA uses, if properly exercised, lead to safety improvements as well as major burden reductions. The article provides, in addition, International Atomic Energy Agency (IAEA) perspective on the topics covered, as reflected in the current PSA programs of the agency. 74 refs., 6 figs., 1 tab

  3. The practice of pre-marketing safety assessment in drug development.

    Science.gov (United States)

    Chuang-Stein, Christy; Xia, H Amy

    2013-01-01

    The last 15 years have seen a substantial increase in efforts devoted to safety assessment by statisticians in the pharmaceutical industry. While some of these efforts were driven by regulations and public demand for safer products, much of the motivation came from the realization that there is a strong need for a systematic approach to safety planning, evaluation, and reporting at the program level throughout the drug development life cycle. An efficient process can help us identify safety signals early and afford us the opportunity to develop effective risk minimization plan early in the development cycle. This awareness has led many pharmaceutical sponsors to set up internal systems and structures to effectively conduct safety assessment at all levels (patient, study, and program). In addition to process, tools have emerged that are designed to enhance data review and pattern recognition. In this paper, we describe advancements in the practice of safety assessment during the premarketing phase of drug development. In particular, we share examples of safety assessment practice at our respective companies, some of which are based on recommendations from industry-initiated working groups on best practice in recent years.

  4. Training courses on integrated safety assessment modelling for waste repositories

    International Nuclear Information System (INIS)

    Mallants, D.

    2007-01-01

    Near-surface or deep repositories of radioactive waste are being developed and evaluated all over the world. Also, existing repositories for low- and intermediate-level waste often need to be re-evaluated to extend their license or to obtain permission for final closure. The evaluation encompasses both a technical feasibility as well as a safety analysis. The long term safety is usually demonstrated by means of performance or safety assessment. For this purpose computer models are used that calculate the migration of radionuclides from the conditioned radioactive waste, through engineered barriers to the environment (groundwater, surface water, and biosphere). Integrated safety assessment modelling addresses all relevant radionuclide pathways from source to receptor (man), using in combination various computer codes in which the most relevant physical, chemical, mechanical, or even microbiological processes are mathematically described. SCK-CEN organizes training courses in Integrated safety assessment modelling that are intended for individuals who have either a controlling or supervising role within the national radwaste agencies or regulating authorities, or for technical experts that carry out the actual post-closure safety assessment for an existing or new repository. Courses are organised by the Department of Waste and Disposal

  5. Human Reliability in Probabilistic Safety Assessments

    International Nuclear Information System (INIS)

    Nunez Mendez, J.

    1989-01-01

    Nowadays a growing interest in environmental aspects is detected in our country. It implies an assessment of the risk involved in the industrial processes and installations in order to determine if those are into the acceptable limits. In these safety assessments, among which PSA (Probabilistic Safety Assessments), can be pointed out the role played by the human being in the system is one of the more relevant subjects (This relevance has been demonstrated in the accidents happened) . However, in Spain there aren't manuals specifically dedicated to asses the human contribution to risk in the frame of PSAs. This report aims to improve this situation providing: a) a theoretical background to help the reader in the understanding of the nature of the human error, b) a quid to carry out a Human Reliability Analysis and c) a selected overview of the techniques and methodologies currently applied in this area. (Author) 20 refs

  6. Interim process report for the safety assessment SR-Can

    International Nuclear Information System (INIS)

    Sellin, Patrick

    2004-08-01

    This report is a documentation of buffer processes identified as relevant to the long-term safety of a KBS-3 repository. The report is part of the interim reporting of the safety assessment SR-Can, see further the Interim main report. The final SR-Can reporting will support SKB's application to build an Encapsulation plant for spent nuclear fuel and is to be produced in 2006. The purpose of this report is to document the scientific knowledge of the processes to a level required for an adequate treatment in the safety assessment. The documentation is thus from a scientific point of not exhaustive since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of an assessment. The purpose is further to determine the handling of each process in the safety assessment and to demonstrate how uncertainties are taken care of, given the suggested handling. The process documentation in the SR 97 version of the Process report is a starting point for this SR-Can interim version. As further described in the Interim main report, the list of relevant processes has been reviewed and slightly extended by comparison to other databases. Furthermore, the backfill has been included as a system part of its own, rather than being described together with the buffer as in SR 97. Apart from giving an interim account of the documentation and handling of buffer processes in SR-Can, this report is meant to serve as a template for the forthcoming documentation of processes occurring in other parts of the repository system. A complete list of processes can be found in the Interim FEP report for the safety assessment SR-Can. All material presented in this document is preliminary in nature and will possibly be updated as the SR-Can project progresses

  7. Interim process report for the safety assessment SR-Can

    Energy Technology Data Exchange (ETDEWEB)

    Sellin, Patrick (ed.)

    2004-08-01

    This report is a documentation of buffer processes identified as relevant to the long-term safety of a KBS-3 repository. The report is part of the interim reporting of the safety assessment SR-Can, see further the Interim main report. The final SR-Can reporting will support SKB's application to build an Encapsulation plant for spent nuclear fuel and is to be produced in 2006. The purpose of this report is to document the scientific knowledge of the processes to a level required for an adequate treatment in the safety assessment. The documentation is thus from a scientific point of not exhaustive since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of an assessment. The purpose is further to determine the handling of each process in the safety assessment and to demonstrate how uncertainties are taken care of, given the suggested handling. The process documentation in the SR 97 version of the Process report is a starting point for this SR-Can interim version. As further described in the Interim main report, the list of relevant processes has been reviewed and slightly extended by comparison to other databases. Furthermore, the backfill has been included as a system part of its own, rather than being described together with the buffer as in SR 97. Apart from giving an interim account of the documentation and handling of buffer processes in SR-Can, this report is meant to serve as a template for the forthcoming documentation of processes occurring in other parts of the repository system. A complete list of processes can be found in the Interim FEP report for the safety assessment SR-Can. All material presented in this document is preliminary in nature and will possibly be updated as the SR-Can project progresses.

  8. Probabilistic safety assessment goals in Canada

    International Nuclear Information System (INIS)

    Snell, V.G.

    1986-01-01

    CANDU safety philosphy, both in design and in licensing, has always had a strong bias towards quantitative probabilistically-based goals derived from comparative safety. Formal probabilistic safety assessment began in Canada as a design tool. The influence of this carried over later on into the definition of the deterministic safety guidelines used in CANDU licensing. Design goals were further developed which extended the consequence/frequency spectrum of 'acceptable' events, from the two points defined by the deterministic single/dual failure analysis, to a line passing through lower and higher frequencies. Since these were design tools, a complete risk summation was not necessary, allowing a cutoff at low event frequencies while preserving the identification of the most significant safety-related events. These goals gave a logical framework for making decisions on implementing design changes proposed as a result of the Probabilistic Safety Analysis. Performing this analysis became a regulatory requirement, and the design goals remained the framework under which this was submitted. Recently, there have been initiatives to incorporate more detailed probabilistic safety goals into the regulatory process in Canada. These range from far-reaching safety optimization across society, to initiatives aimed at the nuclear industry only. The effectiveness of the latter is minor at very low and very high event frequencies; at medium frequencies, a justification against expenditures per life saved in other industries should be part of the goal setting

  9. Probabilistic Safety Assessment of Waste from PyroGreen Processes

    International Nuclear Information System (INIS)

    Ju, Hee Jae; Ham, In hye; Hwang, Il Soon

    2016-01-01

    The main object of PyroGreen processes is decontaminating SNFs into intermediate level waste meeting U.S. WIPP contact-handled (CH) waste characteristics to achieve long-term radiological safety of waste disposal. In this paper, radiological impact of PyroGreen waste disposal is probabilistically assessed using domestic input parameters for safety assessment of disposal. PyroGreen processes is decontamination technology using pyro-chemical process developed by Seoul National University in collaboration with KAERI, Chungnam University, Korea Hydro-Nuclear Power and Yonsei University. Advanced Korean Reference Disposal System (A-KRS) design for vitrified waste is applied to develop safety assessment model using GoldSim software. The simulation result shows that PyroGreen vitrified waste is expected to satisfy the regulatory dose limit criteria, 0.1 mSv/yr. With small probability, however, radiological impact to public can be higher than the expected value after 2E5-year. Although the result implies 100 times safety margin even in that case, further study will be needed to assess the sensitivity of other input parameters which can affect the radiological impact for long-term.

  10. Probabilistic Safety Assessment of Waste from PyroGreen Processes

    Energy Technology Data Exchange (ETDEWEB)

    Ju, Hee Jae; Ham, In hye; Hwang, Il Soon [Seoul National University, Seoul (Korea, Republic of)

    2016-05-15

    The main object of PyroGreen processes is decontaminating SNFs into intermediate level waste meeting U.S. WIPP contact-handled (CH) waste characteristics to achieve long-term radiological safety of waste disposal. In this paper, radiological impact of PyroGreen waste disposal is probabilistically assessed using domestic input parameters for safety assessment of disposal. PyroGreen processes is decontamination technology using pyro-chemical process developed by Seoul National University in collaboration with KAERI, Chungnam University, Korea Hydro-Nuclear Power and Yonsei University. Advanced Korean Reference Disposal System (A-KRS) design for vitrified waste is applied to develop safety assessment model using GoldSim software. The simulation result shows that PyroGreen vitrified waste is expected to satisfy the regulatory dose limit criteria, 0.1 mSv/yr. With small probability, however, radiological impact to public can be higher than the expected value after 2E5-year. Although the result implies 100 times safety margin even in that case, further study will be needed to assess the sensitivity of other input parameters which can affect the radiological impact for long-term.

  11. Electronuclear's safety culture assessment and enhancement program

    International Nuclear Information System (INIS)

    Selvatici, E.; Diaz-Francisco, J.M.; Diniz de Souza, V.

    2002-01-01

    The present paper describes the Eletronuclear's safety culture assessment and enhancement program. The program was launched by the company's top management one year after the creation of Eletronuclear in 1997, from the merging of two companies with different organizational cultures, the design and engineering company Nuclen and the nuclear directorate of the Utility Furnas, Operator of the Angra1 NPP. The program consisted of an assessment performed internally in 1999 with the support and advice of the IAEA. This assessment, performed with the help of a survey, pooled about 80% of the company's employees. The overall result of the assessment was that a satisfactory level of safety culture existed; however, a number of points with a considerable margin for improvement were also identified. These points were mostly related with behavioural matters such as motivation, stress in the workplace, view of mistakes, handling of conflicts, and last but not least a view by a considerable number of employees that a conflict between safety and production might exist. An Action Plan was established by the company managers to tackle these weak points. This Plan was issued as company guideline by the company's Directorate. The subsequent step was to detail and implement the different actions of the Plan, which is the phase that we are at present. In the detailing of the Action Plan, special care was taken to sum up efforts, avoiding duplication of work or competition with already existing programs. In this process it was identified that the company had a considerable number of initiatives directly related to organizational and safety culture improvement, already operational. These initiatives have been integrated in the detailed Action Plan. A new assessment, for checking the effectiveness of the undertaken actions, is planned for 2003. (author)

  12. Assessing systemwide occupational health and safety risks of energy technologies

    International Nuclear Information System (INIS)

    Rowe, M.D.

    1982-01-01

    Input-output modelling is now being used to assess systemwide occupational and public health and safety risks of energy technologies. Some of the advantages and disadvantages of this method are presented and some of its important limitations are discussed. Its primary advantage is that it provides a standard method with which to compare technologies on a consistent basis without extensive economic analysis. Among the disadvantages are limited range of applicability, limited spectrum of health impacts, and inability to identify unusual health impacts unique to a new technology. (author)

  13. Safe operation of nuclear power plants - Is safety culture an adequate management method?

    International Nuclear Information System (INIS)

    Piirto, A.

    2012-01-01

    One of the characteristics of a good safety culture is a definable commitment to the improvement of safety behaviours and attitudes at all organisational levels. A second characteristic of an organisation with excellent safety culture is free and open communication. The general understanding has been that safety culture is a part of organisation culture. In addition to safety culture thinking, proactive programmes and displays of proactive work to improve safety are required. This work needs to include, qt a minimum, actions aiming at reducing human errors, the development of human error prevention tools, improvements in training, and the development of working methods and the organisation's activities. Safety depends not only on the technical systems, but also on the organisation. There is a need for better methods and tools for organisational assessment and development. Today there is universal acceptance of the significant impact that management and organisational factors have over the safety significance of complex industrial installations such as nuclear power plants. Many events with significant economic and public impact had causes that have been traced to management deficiencies. The objective of this study is development of new methods to increase safety of nuclear power plant operation. The research has been limited to commercial nuclear power plants that are intended for electrical power generation in Finland. Their production activities, especially operation and maintenance, are primarily reviewed from a safety point of view, as well as human performance and organisational factors perspective. This defines the scope and focus of the study. The research includes studies related to knowledge management and tacit knowledge in the project management context and specific studies related to transfer of tacit knowledge in the maintenance organization and transfer of tacit knowledge between workers of old generation and young generation. The empirical results

  14. Safe operation of nuclear power plants - Is safety culture an adequate management method?

    Energy Technology Data Exchange (ETDEWEB)

    Piirto, A.

    2012-07-01

    One of the characteristics of a good safety culture is a definable commitment to the improvement of safety behaviours and attitudes at all organisational levels. A second characteristic of an organisation with excellent safety culture is free and open communication. The general understanding has been that safety culture is a part of organisation culture. In addition to safety culture thinking, proactive programmes and displays of proactive work to improve safety are required. This work needs to include, qt a minimum, actions aiming at reducing human errors, the development of human error prevention tools, improvements in training, and the development of working methods and the organisation's activities. Safety depends not only on the technical systems, but also on the organisation. There is a need for better methods and tools for organisational assessment and development. Today there is universal acceptance of the significant impact that management and organisational factors have over the safety significance of complex industrial installations such as nuclear power plants. Many events with significant economic and public impact had causes that have been traced to management deficiencies. The objective of this study is development of new methods to increase safety of nuclear power plant operation. The research has been limited to commercial nuclear power plants that are intended for electrical power generation in Finland. Their production activities, especially operation and maintenance, are primarily reviewed from a safety point of view, as well as human performance and organisational factors perspective. This defines the scope and focus of the study. The research includes studies related to knowledge management and tacit knowledge in the project management context and specific studies related to transfer of tacit knowledge in the maintenance organization and transfer of tacit knowledge between workers of old generation and young generation. The empirical

  15. Development of a quality assurance safety assessment database for near surface radioactive waste disposal

    International Nuclear Information System (INIS)

    Park, J. W.; Kim, C. L.; Park, J. B.; Lee, E. Y.; Lee, Y. M.; Kang, C. H.; Zhou, W.; Kozak, M. W.

    2003-01-01

    A quality assurance safety assessment database, called QUARK (QUality Assurance program for Radioactive waste management in Korea), has been developed to manage both analysis information and parameter database for safety assessment of Low- and Intermediate-Level radioactive Waste (LILW) disposal facility in Korea. QUARK is such a tool that serves QA purposes for managing safety assessment information properly and securely. In QUARK, the information is organized and linked to maximize the integrity of information and traceability. QUARK provides guidance to conduct safety assessment analysis, from scenario generation to result analysis, and provides a window to inspect and trace previous safety assessment analysis and parameter values. QUARK also provides default database for safety assessment staff who construct input data files using SAGE(Safety Assessment Groundwater Evaluation), a safety assessment computer code

  16. Safety assessments for deep geological disposal of radioactive wastes

    International Nuclear Information System (INIS)

    Lyon, R.B.

    1984-01-01

    The objective of safety assessment for deep geological disposal of radioactive wastes is to evaluate how well the engineered barriers and geological setting inhibit radionuclide migration and prevent radiation dose to man. Safety assessment is influenced through interaction with the regulatory agencies, research groups, the public and the various levels of government. Under the auspices of the IAEA, a generic disposal system description has been developed to facilitate international exchange and comparison of data and results, and to enable development and comparison of performance for all components of the disposal system. It is generally accepted that a systems modelling approach is required and that safety assessment can be considered on two levels. At the systems level, all components of the system are taken into account to evaluate the risk to man. At the systems level, critical review and quality assurance on software provide the major validation techniques. Risk is a combination of dose estimate and probability of that dose. For analysis of the total system to be practical, the components are usually represented by simplified models. Recently, assessments have been taking uncertainties in the input data into account. At the detailed level, large-scale, complex computer programs model components of the system in sufficient detail that validation by comparison with field and laboratory measurements is possible. For example, three-dimensional fluid-flow, heat-transport and solute-transport computer programs have been used. Approaches to safety assessment are described, with illustrations from safety assessments performed in a number of countries. (author)

  17. Non-animal approaches for consumer safety risk assessments: Unilever's scientific research programme.

    Science.gov (United States)

    Carmichael, Paul; Davies, Michael; Dent, Matt; Fentem, Julia; Fletcher, Samantha; Gilmour, Nicola; MacKay, Cameron; Maxwell, Gavin; Merolla, Leona; Pease, Camilla; Reynolds, Fiona; Westmoreland, Carl

    2009-12-01

    Non-animal based approaches to risk assessment are now routinely used for assuring consumer safety for some endpoints (such as skin irritation) following considerable investment in developing and applying new methods over the past 20 years. Unilever's research programme into non-animal approaches for safety assessment is currently focused on the application of new technologies to risk assessments in the areas of skin allergy, cancer and general toxicity (including inhalation toxicity). In all of these areas, a long-term investment is essential to increase the scientific understanding of the underlying biological and chemical processes that we believe will ultimately form a sound basis for novel risk assessment approaches. Our research programme in these priority areas consists of in-house research as well as Unilever-sponsored academic research, involvement with EU-funded projects (e.g. Sens-it-iv, carcinoGENOMICS), participation in cross-industry collaborative research (e.g. COLIPA, EPAA) and ongoing involvement with other scientific initiatives on non-animal approaches to risk assessment (e.g. UK NC3Rs, US 'Human Toxicology Project' consortium). 2009 FRAME.

  18. A study on a reliability assessment methodology for the VHTR safety systems

    International Nuclear Information System (INIS)

    Lee, Hyung Sok

    2012-02-01

    The passive safety system of a 300MWt VHTR (Very High Temperature Reactor)which has attracted worldwide attention recently is actively considered for designing the improvement in the safety of the next generation nuclear power plant. The passive system functionality does not rely on an external source of the electrical support system,but on an intelligent use of the natural phenomena, such as convection, conduction, radiation, and gravity. It is not easy to evaluate quantitatively the reliability of the passive safety for the risk analysis considering the existing active system failure since the classical reliability assessment method could not be applicable. Therefore a new reliability methodology needs to be developed and applied for evaluating the reliability of the conceptual designed VHTR in this study. The preliminary evaluation and conceptualization are performed using the concept of the load and capacity theory related to the reliability physics model. The method of response surface method (RSM) is also utilized for evaluating the maximum temperature of nuclear fuel in this study. The significant variables and their correlation are considered for utilizing the GAMMA+ code. The proposed method might contribute to designing the new passive system of the VHTR

  19. New safety performance indicators for safety assessment of radioactive waste disposal facilities. Cuban experience

    International Nuclear Information System (INIS)

    Peralta Vital, J.L.; Castillo, R.G.; Olivera, J.

    2002-01-01

    The paper shows the Cuban experience on implementing geological disposal of radioactive waste and the necessity for identifying new safety performance indicators for the safety assessment (SA) of radioactive waste disposal facilities. The selected indicator was the concentration of natural radioactive elements (U, Ra, Th, K) in the Cuban geologic environment. We have carried out a group of investigations, which have allowed characterising the concentration for the whole Country, creating a wide database where this indicator is associated with the lithology. The main lithologies in Cuba are: the sedimentary rocks (70 percent of national occurrence), which are present in the three regions (limestone and lutite), and finally the igneous and metamorphic rocks. The results show the concentrations ranges of the natural radionuclides associated fundamentally to the variation in the lithology and geographical area of the Country. In Cuba, the higher concentration (ppm) of Uranium and Radium are referenced to the Central region associated to Skarn, while for Thorium (ppm) and Potassium (%), in the East region the concentration peaks in Tuffs have been found. The concentrations ranges obtained are preliminary, they characterise the behaviour of this parameter for the Cuban geology, but they do not represent limits for safety assessment purposes yet. Also other factors should be taken into account as the assessment context, time scales and others assumptions before establishing the final concentration limits for the natural radionuclides as a radiological and nuclear safety performance indicator complementary to dose and risk for safety assessment for radiological and nuclear facilities. (author)

  20. Assessment and management of aging of nuclear power plant safety-related structures

    International Nuclear Information System (INIS)

    Naus, D.J.; Graves, H.L. III; Ellingwood, B.R.

    2003-01-01

    Background information and data have been developed for improving existing and developing new methods to assist in quantifying the effects of age-related degradation on the performance of nuclear power plant (NPP) safety-related structures. Factors that can lead to age-related degradation of safety-related structures are identified and their manifestations described. Current regulatory testing and inspection requirements are reviewed and a summary of degradation experience presented. Techniques commonly used to inspect NPP concrete structures to assess and quantify age-related degradation are summarized. An approach for conduct of condition assessments of structures in NPPs is presented. Criteria, based primarily on visual indications, are provided for use in classification and assessment of concrete degradation. Materials and techniques for repair of degraded structures are noted and guidance provided on repair options available for various forms of degradation. A probabilistic methodology for condition assessment and reliability-based life prediction has been developed and applied to structures subject to combinations of structural load processes and to structural systems. The methodology has also been used to investigate optimization of in-service inspection and maintenance strategies to maintain failure probability below a specified target value as well as to minimize costs. Fragility assessments involving analytical solutions and finite-element methods have been utilized to predict the effect of aging degradation on structural component performance. (author)

  1. SCART guidelines. Reference report for IAEA Safety Culture Assessment Review Team (SCART)

    International Nuclear Information System (INIS)

    2008-01-01

    The IAEA Director General stressed the role of safety culture in his concluding remarks at the Meeting of the Contracting Parties to the Convention on Nuclear Safety in 2002: 'As we have learned in other areas, it is not enough simply to have a structure; it is not enough to say that we have the necessary laws and the appropriate regulatory bodies. All these are important, but equally important is that we have in place a safety culture that gives effect to the structure that we have developed. To me, effectiveness and transparency are keys. So, it is an issue which I am pleased to see, you are giving the attention it deserves and we will continue to work with you in clarifying, developing and applying safety culture through our programmes and through our technical cooperation activities.' The concept of safety culture was initially developed by the International Nuclear Safety Advisory Group (INSAG) after the Chernobyl accident in 1986. Since then the IAEA's perspective of safety culture has expanded with time as its recognition of the complexities of the concept developed. Safety culture is considered to be specific organizational culture in all types of organizations with activities that give rise to radiation risks. The aim is to make safety culture strong and sustainable, so that safety becomes a primary focus for all activities in such organizations, even for those, which might not look safety-related at first. SCART (Safety Culture Assessment Review Team) is a safety review service, which reflects the expressed interest of Members States for methods and tools for safety culture assessment. It is a replacement for the earlier service ASCOT (Assessment of Safety Culture in Organizations Team). The IAEA Safety Fundamentals, Requirements and Guides (Safety Standards) are the basis for the SCART Safety Review Service. The reports of INSAG, identifying important current nuclear safety issues, serve also as references during a SCART mission. SCART missions are based

  2. EFFICIENT QUANTITATIVE RISK ASSESSMENT OF JUMP PROCESSES: IMPLICATIONS FOR FOOD SAFETY

    OpenAIRE

    Nganje, William E.

    1999-01-01

    This paper develops a dynamic framework for efficient quantitative risk assessment from the simplest general risk, combining three parameters (contamination, exposure, and dose response) in a Kataoka safety-first model and a Poisson probability representing the uncertainty effect or jump processes associated with food safety. Analysis indicates that incorporating jump processes in food safety risk assessment provides more efficient cost/risk tradeoffs. Nevertheless, increased margin of safety...

  3. Safety re-assessment of AECL test and research reactors

    International Nuclear Information System (INIS)

    Winfield, D.J.

    1990-01-01

    Atomic Energy of Canada Limited currently has four operating engineering test/research reactors of various sizes and ages; a new isotope-production reactor Maple-X10, under construction at Chalk River Nuclear Laboratories (CRNL), and a heating demonstration reactor, SDR, undergoing high-power commissioning at Whiteshell Nuclear Research Establishment (WNRE). The company is also performing design studies of small reactors for hot water and electricity production. The older reactors are ZED-2, PTR, NRX, and NRU; these range in age from 42 years (NRX) to 29 years (ZED-2). Since 1984, limited-scope safety re-assessments have been underway on three of these reactors (ZED-2, NRX AND NRU). ZED-2 and PTR are operated by the Reactor Physics Branch; all other reactors are operated by the respective site Reactor Operations Branches. For the older reactors the original safety reports produced were entirely deterministic in nature and based on the design-basis accident concept. The limited scope safety re-assessments for these older reactors, carried out over the past 5 years, have comprised both quantitative probabilistic safety-assessment techniques, such as event tree and fault analysis, and/or qualitative techniques, such as failure mode and effect analysis. The technique used for an individual assessment was dependent upon the specific scope required. This paper discusses the types of analyses carried out, specific insights/recommendations resulting from the analysis, and the plan for future analysis. In addition, during the last four years safety assessments have been carried out on the new isotope-, heat-, and electricity-producing reactors, as part of the safety design review, commissioning and licensing activities

  4. A proposed impact assessment method for genetically modified plants (AS-GMP Method)

    International Nuclear Information System (INIS)

    Jesus-Hitzschky, Katia Regina Evaristo de; Silveira, Jose Maria F.J. da

    2009-01-01

    An essential step in the development of products based on biotechnology is an assessment of their potential economic impacts and safety, including an evaluation of the potential impact of transgenic crops and practices related to their cultivation on the environment and human or animal health. The purpose of this paper is to provide an assessment method to evaluate the impact of biotechnologies that uses quantifiable parameters and allows a comparative analysis between conventional technology and technologies using GMOs. This paper introduces a method to perform an impact analysis associated with the commercial release and use of genetically modified plants, the Assessment System GMP Method. The assessment is performed through indicators that are arranged according to their dimension criterion likewise: environmental, economic, social, capability and institutional approach. To perform an accurate evaluation of the GMP specific indicators related to genetic modification are grouped in common fields: genetic insert features, GM plant features, gene flow, food/feed field, introduction of the GMP, unexpected occurrences and specific indicators. The novelty is the possibility to include specific parameters to the biotechnology under assessment. In this case by case analysis the factors of moderation and the indexes are parameterized to perform an available assessment.

  5. A proposal of safety indicators aggregation to assess the safety management effectiveness of nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Jose Antonio B.; Saldanha, Pedro L.C. [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil). Coordenacao-Geral de Reatores e Ciclo Combustivel], e-mail: jantonio@cnen.gov.br, e-mail: saldanha@cnen.gov.br; Melo, Paulo F.F. Frutuoso e [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear], e-mail: frutuoso@con.ufrj.br

    2009-07-01

    Safety management has changed with the evolution of management methods, named Quality Systems, moving from Quality Control, where the focus was the product, passing through Quality Assurance, which takes care of the whole manufacturing process and reaching the Total Quality Management, where policies and goals are established. Nowadays, there is a trend towards Management Systems, which integrate all different aspects related to the management of an organization (safety, environment, security, quality, costs and, etc), but it is necessary to have features to establish and assure that safety overrides the remaining aspects. The most usual way to reach this goal is to establish a policy where safety is a priority, but its implementation and the assessment of its effectiveness are no so simple. Nuclear power plants usually have over a hundred safety indicators in many processes dedicated to prevent and detect problems, although a lot of them do not evaluate these indicators in an integrated manner or point out degradation trends of organizational aspects, which can affect the plant safety. This work develops an aggregation of proactive and reactive safety indicators in order to evaluate the effectiveness of nuclear power plant safety management and to detect, at early stages, signs of process degradation or activities used to establish, maintain and assure safety conditions. The aggregation integrates indicators of the usual processes and is based on the manner the management activities have been developed in the last decades, that is: Planning, Doing, Checking and Acting - known as PDCA cycle - plus a fifth element related to the capability of those who perform safety activities. The proposed aggregation is in accordance to Brazilian standards and international recommendations and constitutes a friendly link between the top management level and the daily aspects of the organization. (author)

  6. A proposal of safety indicators aggregation to assess the safety management effectiveness of nuclear power plants

    International Nuclear Information System (INIS)

    Carvalho, Jose Antonio B.; Saldanha, Pedro L.C.; Melo, Paulo F.F. Frutuoso e

    2009-01-01

    Safety management has changed with the evolution of management methods, named Quality Systems, moving from Quality Control, where the focus was the product, passing through Quality Assurance, which takes care of the whole manufacturing process and reaching the Total Quality Management, where policies and goals are established. Nowadays, there is a trend towards Management Systems, which integrate all different aspects related to the management of an organization (safety, environment, security, quality, costs and, etc), but it is necessary to have features to establish and assure that safety overrides the remaining aspects. The most usual way to reach this goal is to establish a policy where safety is a priority, but its implementation and the assessment of its effectiveness are no so simple. Nuclear power plants usually have over a hundred safety indicators in many processes dedicated to prevent and detect problems, although a lot of them do not evaluate these indicators in an integrated manner or point out degradation trends of organizational aspects, which can affect the plant safety. This work develops an aggregation of proactive and reactive safety indicators in order to evaluate the effectiveness of nuclear power plant safety management and to detect, at early stages, signs of process degradation or activities used to establish, maintain and assure safety conditions. The aggregation integrates indicators of the usual processes and is based on the manner the management activities have been developed in the last decades, that is: Planning, Doing, Checking and Acting - known as PDCA cycle - plus a fifth element related to the capability of those who perform safety activities. The proposed aggregation is in accordance to Brazilian standards and international recommendations and constitutes a friendly link between the top management level and the daily aspects of the organization. (author)

  7. Value-impact assessment of safety-related modifications

    International Nuclear Information System (INIS)

    Knowles, W.M.C.; Dinnie, K.S.; Gordon, C.W.

    1992-01-01

    Like other nuclear utilities, Ontario Hydro, as part of its risk management activities, continually assesses the safety of its nuclear operations. In addition, new regulatory requirements are being applied to the older nuclear power plants. Both of these result in proposed plant modifications designed to reduce the risk to the public. However, modifications to an operating plant can have serious economic effects, and the resources, both financial and personnel, required for the implementation of these modifications are limited. Thus, all potential benefits and effects of a proposed modification must be thoroughly investigated to judge whether the modification is beneficial. Ontario Hydro has begun to use comprehensive value-impact assessments, utilizing plant-specific probabilistic risk assessments (PRAs), as tools to provide an informed basis for judgments on the benefit of safety-related modifications. The results from value-impact assessments can also be used to prioritize the implementation of these modifications

  8. Use of the Home Safety Self-Assessment Tool (HSSAT) within Community Health Education to Improve Home Safety.

    Science.gov (United States)

    Horowitz, Beverly P; Almonte, Tiffany; Vasil, Andrea

    2016-10-01

    This exploratory research examined the benefits of a health education program utilizing the Home Safety Self-Assessment Tool (HSSAT) to increase perceived knowledge of home safety, recognition of unsafe activities, ability to safely perform activities, and develop home safety plans of 47 older adults. Focus groups in two senior centers explored social workers' perspectives on use of the HSSAT in community practice. Results for the health education program found significant differences between reported knowledge of home safety (p = .02), ability to recognize unsafe activities (p = .01), safely perform activities (p = .04), and develop a safety plan (p = .002). Social workers identified home safety as a major concern and the HSSAT a promising assessment tool. Research has implications for reducing environmental fall risks.

  9. Study on safety evaluation method for impact protection structures of spent nuclear fuel carriers

    International Nuclear Information System (INIS)

    Endo, Hisayoshi; Yamada, Yasuhira; Hashizume, Yutaka

    2004-01-01

    From a safety assessment view point, tanker ships transporting spent nuclear fuels such as plutonium including MOX (mixed oxide) fuels and high level radioactive wastes, are required to have security structures for collision accidents. The requirement is now reviewing in keeping with reality of the preset condition. Here, as a typical scenario, the probabilistic safety of VLCC (very large crude carrier) was examined. The FEM (finite element method) simulation analysis and new simple analyses in behalf of Minorsky method based on experience rule have been developed to analyze the collision strength, and their validity were examined. (A. Hishinuma)

  10. Integrated safety assessment report: Integrated Safety Assessment Program: Millstone Nuclear Power Station, Unit 1 (Docket No. 50-245): Draft report

    International Nuclear Information System (INIS)

    1987-04-01

    The Integrated Safety Assessment Program (ISAP) was initiated in November 1984, by the US Nuclear Regulatory Commission to conduct integrated assessments for operating nuclear power reactors. The integrated assessment is conducted in a plant-specific basis to evaluate all licensing actions, licensee initiated plant improvements and selected unresolved generic/safety issues to establish implementation schedules for each item. In addition, procedures will be established to allow for a periodic updating of the schedules to account for licensing issues that arise in the future. This report documents the review of Millstone Nuclear Power Station, Unit No. 1, operated by Northeast Nuclear Energy Company (located in Waterford, Connecticut). Millstone Nuclear Power Station, Unit No. 1, is one of two plants being reviewed under the pilot program for ISAP. This report indicates how 85 topics selected for review were addressed. This report presents the staff's recommendations regarding the corrective actions to resolve the 85 topics and other actions to enhance plant safety. The report is being issued in draft form to obtain comments from the licensee, nuclear safety experts, and the Advisory Committee for Reactor Safeguards (ACRS). Once those comments have been resolved, the staff will present its positions, along with a long-term implementation schedule from the licensee, in the final version of this report

  11. Safety Assessment for a KBS-3H spent nuclear fuel repository at Olkiluoto

    International Nuclear Information System (INIS)

    Smith, P.; Neall, F.; Snellman, M.; Pastina, B.; Hjerpe, T.; Nordman, H.; Johnson, L.

    2007-12-01

    The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. KBS-3H and KBS-3V are the two design alternatives of the KBS-3 spent fuel disposal method. Posiva and SKB have conducted a joint research, demonstration and development (RD and D) programme in 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to the reference alternative KBS-3V. The overall objectives of the present phase covering the period 2004-2007 have been to demonstrate that the horizontal deposition alternative is technically feasible and to demonstrate that it fulfils the same long-term safety requirements as KBS-3V. The safety studies conducted as part of this programme include a safety assessment of a preliminary design of a KBS-3H repository for spent nuclear fuel located about 400 m underground at the Olkiluoto site, which is the proposed site for a spent fuel repository in Finland. This safety assessment is summarised in the present report. The scientific basis of the safety assessment includes around 30 years of scientific R and D and technical development in the Swedish and Finnish KBS-3V programmes. Much of this scientific basis is directly applicable to KBS-3H. This has allowed the KBS-3H safety studies to focus on those issues that are unique to this design alternative, identified in a systematic difference analysis of KBS-3H and KBS-3V. This difference analysis has shown that the key differences in the evolution and performance of KBS-3H and KBS-3V relate mainly to the engineered barrier system and to the impact of local variations in the rate of groundwater inflow on buffer saturation along the KBS-3H deposition drifts. No features or processes specific to KBS-3H have been identified that could lead to a loss or substantial degradation of the safety functions of the engineered barriers over a million year time frame. Radionuclide release from the repository near field in the event of

  12. Assessing progress in the development of safety culture

    International Nuclear Information System (INIS)

    Rotaru, Ioan; Ghita, Sorin

    1999-01-01

    The concept of safety culture was introduced by the International Nuclear Safety Advisory Group (INSAG) in the Summary Report on the Post-Accident Meeting on the Chernobyl Accident in 1986. The concept was further expanded in the 1988 INSAG-3 report, Basic Safety Principles for Nuclear Power Plants, and again in 1991 in the INSAG-4 report. Recognizing the increasing role that safety culture is expected to play in nuclear installations worldwide, the Convention on Nuclear Safety states the Contracting Parties' desire 'to promote an effective nuclear safety culture'. The concept of safety culture is defined in INSAG-4 as follows: Safety culture is that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance. Safety culture is also an amalgamation of values, standards, morals and norms of acceptable behaviour. These are aimed at maintaining a self disciplined approach to the enhancement of safety beyond legislative and regulatory requirements. Therefore, the safety culture has to be inherent in the thoughts and actions of all the individuals at every level in an organization. The leadership provided by top management is crucial. Safety culture applies to conventional and personal safety as well as nuclear safety. All safety consideration are affected by common points of beliefs, attitudes, behaviour, and cultural differences, closely linked to a shared system of values and standards. The paper poses questions and tries to find answers relative to issues like: - how to assess progress; - specific organizational indicators of a progressive safety culture; - detection of incipient weaknesses in safety culture (organizational issues, employee issues, technology issues); - revitalizing a weakened safety culture; - overall assesment of safety culture; - general evaluation model. In conclusion, there is no consistent and

  13. Safety assessment for the 24 CANFLEX-NU bundle demonstration irradiation at Wolsong-1 generation

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Ho Chun; Cho, M. S.; Jun, J. S. and others

    2001-06-01

    This document is a report on the safety assessment for the 24 CANFLEX-NU(CANDU Flexible fuelling - Natural Uranium) fuel bundle demonstration irradiation at Wolsong-1 Generating Station. The CANFLEX fuel bundle as a CANDU advanced fuel has been jointly developed by KAERI/AECL. This document describes the rationale for the demonstration irradiation and comments on the Korean government licensing issues such as the status of the CANFLEX fuel irradiations at NRU research reactor in AECL, status and plan of the CANFLEX fuel irradiations at a CANDU-6 power reactor, status of the water CHF(Critical Heat Flux) test at Stern Laboratories and the CHF correlation. This documents presents an assessment the consequences of postulated accidents with all safety system available during demonstration irradiation of 24 CANFLEX-NU fuel bundles at Wolsong-1 Generating Station. The assessment is made by two kinds of approaches. One approach is based on the document of the safety assessment for the 24 CANFLEX-NU fuel bundle demonstration irradiation at Point Lepreau Generating Station. The other approach is taken from the safety analyses using the analysis methods and assumptions used in the final safety reports on the 600 MWe CANDU-PHWR Wolsung-2, 3, and 4 Nuclear Power Plants for the Korea Electric Power Cooperation. The analyses are not comprehensive reviews of the postulated accidents, but examination of the expected difference in accident consequences because of the presence of 24 CANFLEX fuel bundles in two channels. The approach is to compare the difference to the safety margin for 37-element bundle cases.

  14. Improvement of Safety Assessment Methodologies for Near Surface Disposal Facilities

    International Nuclear Information System (INIS)

    Batandjieva, B.; Torres-Vidal, C.

    2002-01-01

    The International Atomic Energy Agency (IAEA) Coordinated research program ''Improvement of Safety Assessment Methodologies for Near Surface Disposal Facilities'' (ISAM) has developed improved safety assessment methodology for near surface disposal facilities. The program has been underway for three years and has included around 75 active participants from 40 countries. It has also provided examples for application to three safety cases--vault, Radon type and borehole radioactive waste disposal facilities. The program has served as an excellent forum for exchange of information and good practices on safety assessment approaches and methodologies used worldwide. It also provided an opportunity for reaching broad consensus on the safety assessment methodologies to be applied to near surface low and intermediate level waste repositories. The methodology has found widespread acceptance and the need for its application on real waste disposal facilities has been clearly identified. The ISAM was finalized by the end of 2000, working material documents are available and an IAEA report will be published in 2002 summarizing the work performed during the three years of the program. The outcome of the ISAM program provides a sound basis for moving forward to a new IAEA program, which will focus on practical application of the safety assessment methodologies to different purposes, such as licensing radioactive waste repositories, development of design concepts, upgrading existing facilities, reassessment of operating repositories, etc. The new program will also provide an opportunity for development of guidance on application of the methodology that will be of assistance to both safety assessors and regulators

  15. Technical Issues and Proposes on the Legislation of Probabilistic Safety Assessment in Periodic Safety Review

    International Nuclear Information System (INIS)

    Hwang, Seok-Won; Jeon, Ho-Jun; Na, Jang-Hwan

    2015-01-01

    Korean Nuclear Power Plants have performed a comprehensive safety assessment reflecting design and procedure changes and using the latest technology every 10 years. In Korea, safety factors of PSR are revised to 14 by revision of IAEA Safety Guidelines in 2003. In the revised safety guidelines, safety analysis field was subdivided into deterministic safety analysis, PSA (Probabilistic safety analysis), and hazard analysis. The purpose to examine PSA as a safety factor on PSR is to make sure that PSA results and assumptions reflect the latest state of NPPs, validate the level of computer codes and analytical models, and evaluate the adequacy of PSA instructions. In addition, its purpose is to derive the plant design change, operating experience of other plants and safety enhancement items as well. In Korea, PSA is introduced as a new factor. Thus, the overall guideline development and long-term implementation strategy are needed. Today in Korea, full-power PSA model revision and low-power and shutdown (LPSD) PSA model development is being performed as a part of the post Fukushima action items for operating plants. The scope of the full-power PSA is internal/external level 1, 2 PSA. But in case of fire PSA, the scope is level 1 PSA using new method, NUREG/CR-6850. In case of LPSD PSA, level 1 PSA for all operating plants, and level 2 PSA for 2 demonstration plants are under development. The result of the LPSD PSA will be used as major input data for plant specific SAMG (Severe Accident Management Guideline). The scope of PSA currently being developed in Korea cannot fulfill 'All Mode, All Scope' requirements recommended in the IAEA Safety Guidelines. Besides the legislation of PSA, step-by-step development strategy for non-performed scopes such as level 3 PSA and new fire PSA is one of the urgent issues in Korea. This paper suggests technical issues and development strategies for each PSA technical elements.

  16. Models and methods for hot spot safety work

    DEFF Research Database (Denmark)

    Vistisen, Dorte

    2002-01-01

    Despite the fact that millions DKK each year are spent on improving roadsafety in Denmark, funds for traffic safety are limited. It is therefore vital to spend the resources as effectively as possible. This thesis is concerned with the area of traffic safety denoted "hot spot safety work", which...... is the task of improving road safety through alterations of the geometrical and environmental characteristics of the existing road network. The presently applied models and methods in hot spot safety work on the Danish road network were developed about two decades ago, when data was more limited and software...... and statistical methods less developed. The purpose of this thesis is to contribute to improving "State of the art" in Denmark. Basis for the systematic hot spot safety work are the models describing the variation in accident counts on the road network. In the thesis hierarchical models disaggregated on time...

  17. Research on advanced system safety assessment procedures (II)

    International Nuclear Information System (INIS)

    Suzuki, Kazuhiko; Shimada, Yukiyasu

    1999-03-01

    HAZOP (Hazard and operability study) is a systematic technique, which requires the involvement of an experienced, interdisciplinary team of engineers, to identify hazards or operability problems throughout an entire facility by brainstorming. Though HAZOP is recognized as the useful safety assessment method, it requires a labor-intensive and time-consuming process. So recently computer-aided HAZOP has been proposed. The research report in 1998 (PNC PJ1612 98-001) presented prototype system, which carries out HAZOP and FT synthesis, by making use of proposed method. Relationships between states of input and output variables, internal and external events of each component are represented using decision tables, and the system is implemented by C++. In this study, the causalities of plant component malfunctions are described as component malfunction basic model and are stored in the computer. Thus, we have developed safety evaluation support system by considering the fault propagation path. Component malfunction basic model is made based on the information on the causalities between the abnormal state and each malfunction in components. This component malfunction basic model provides the common frame to describe abnormal situation in components. By using this basic model, not only state malfunction of component but also the consequence to external circumstance is assessed. G2, which is an excellent object-oriented developer tool in GUI (Graphical User Interface), is used as a tool for developing the system. By using the graphical editor in the system, the user can carry out HAZOP easily. We have applied this system to the Nuclear Reprocessing Facilities to demonstrate the utilities of developing system. (author)

  18. Assessing propensity to learn from safety-related events

    NARCIS (Netherlands)

    Drupsteen, L.; Wybo, J.L.

    2015-01-01

    Most organisations aim to use experience from the past to improve safety, for instance through learning from safety-related incidents and accidents. Whether an organisation is able to learn successfully can however only be determined afterwards. So far, there are no proactive measures to assess

  19. Healthcare professionals’ views of feedback on patient safety culture assessment.

    NARCIS (Netherlands)

    Zwijnenberg, N.C.; Hendriks, M.; Hoogervorst-Schilp, J.; Wagner, C.

    2016-01-01

    Background: By assessing patient safety culture, healthcare providers can identify areas for improvement in patient safety culture. To achieve this, these assessment outcomes have to be relevant and presented clearly. The aim of our study was to explore healthcare professionals’ views on the

  20. Operation safety of control systems. Principles and methods

    International Nuclear Information System (INIS)

    Aubry, J.F.; Chatelet, E.

    2008-01-01

    This article presents the main operation safety methods that can be implemented to design safe control systems taking into account the behaviour of the different components with each other (binary 'operation/failure' behaviours, non-consistent behaviours and 'hidden' failures, dynamical behaviours and temporal aspects etc). To take into account these different behaviours, advanced qualitative and quantitative methods have to be used which are described in this article: 1 - qualitative methods of analysis: functional analysis, preliminary risk analysis, failure mode and failure effects analyses; 2 - quantitative study of systems operation safety: binary representation models, state space-based methods, event space-based methods; 3 - application to the design of control systems: safe specifications of a control system, qualitative analysis of operation safety, quantitative analysis, example of application; 4 - conclusion. (J.S.)

  1. Trends in HFE Methods and Tools and Their Applicability to Safety Reviews

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J.M.; Plott, C.; Milanski, J.; Ronan, A.; Scheff, S.; Laux, L.; and Bzostek, J.

    2009-09-30

    The U.S. Nuclear Regulatory Commission's (NRC) conducts human factors engineering (HFE) safety reviews of applicant submittals for new plants and for changes to existing plants. The reviews include the evaluation of the methods and tools (M&T) used by applicants as part of their HFE program. The technology used to perform HFE activities has been rapidly evolving, resulting in a whole new generation of HFE M&Ts. The objectives of this research were to identify the current trends in HFE methods and tools, determine their applicability to NRC safety reviews, and identify topics for which the NRC may need additional guidance to support the NRC's safety reviews. We conducted a survey that identified over 100 new HFE M&Ts. The M&Ts were assessed to identify general trends. Seven trends were identified: Computer Applications for Performing Traditional Analyses, Computer-Aided Design, Integration of HFE Methods and Tools, Rapid Development Engineering, Analysis of Cognitive Tasks, Use of Virtual Environments and Visualizations, and Application of Human Performance Models. We assessed each trend to determine its applicability to the NRC's review by considering (1) whether the nuclear industry is making use of M&Ts for each trend, and (2) whether M&Ts reflecting the trend can be reviewed using the current design review guidance. We concluded that M&T trends that are applicable to the commercial nuclear industry and are expected to impact safety reviews may be considered for review guidance development. Three trends fell into this category: Analysis of Cognitive Tasks, Use of Virtual Environments and Visualizations, and Application of Human Performance Models. The other trends do not need to be addressed at this time.

  2. Trends in HFE Methods and Tools and Their Applicability to Safety Reviews

    International Nuclear Information System (INIS)

    O'Hara, J.M.; Plott, C.; Milanski, J.; Ronan, A.; Scheff, S.; Laux, L.; Bzostek, J.

    2009-01-01

    The U.S. Nuclear Regulatory Commission's (NRC) conducts human factors engineering (HFE) safety reviews of applicant submittals for new plants and for changes to existing plants. The reviews include the evaluation of the methods and tools (M and T) used by applicants as part of their HFE program. The technology used to perform HFE activities has been rapidly evolving, resulting in a whole new generation of HFE M and Ts. The objectives of this research were to identify the current trends in HFE methods and tools, determine their applicability to NRC safety reviews, and identify topics for which the NRC may need additional guidance to support the NRC's safety reviews. We conducted a survey that identified over 100 new HFE M and Ts. The M and Ts were assessed to identify general trends. Seven trends were identified: Computer Applications for Performing Traditional Analyses, Computer-Aided Design, Integration of HFE Methods and Tools, Rapid Development Engineering, Analysis of Cognitive Tasks, Use of Virtual Environments and Visualizations, and Application of Human Performance Models. We assessed each trend to determine its applicability to the NRC's review by considering (1) whether the nuclear industry is making use of M and Ts for each trend, and (2) whether M and Ts reflecting the trend can be reviewed using the current design review guidance. We concluded that M and T trends that are applicable to the commercial nuclear industry and are expected to impact safety reviews may be considered for review guidance development. Three trends fell into this category: Analysis of Cognitive Tasks, Use of Virtual Environments and Visualizations, and Application of Human Performance Models. The other trends do not need to be addressed at this time.

  3. Probabilistic safety assessment of the dual-cooled waste transmutation blanket for the FDS-I

    International Nuclear Information System (INIS)

    Hu, L.; Wu, Y.

    2006-01-01

    The subcritical dual-cooled waste transmutation (DWT) blanket is one of the key components of fusion-driven subcritical system (FDS-I). The probabilistic safety assessment (PSA) can provide valuable information on safety characteristics of FDS-I to give recommendations for the optimization of the blanket concepts and the improvement of the design. Event tree method has been adopted to probabilistically analyze the safety of the DWT blanket for FDS-I using the home-developed PSA code RiskA. The blanket melting frequency has been calculated and compared with the core melting frequencies of PWRs and a fast reactor. Sensitivity analysis of the safety systems has been performed. The results show that the current preliminary design of the FDS-I is very attractive in safety

  4. Guidance on the safety assessment methodology for storage of radioactive waste

    International Nuclear Information System (INIS)

    Kinyanjui, M.N.

    2014-04-01

    This project on safety assessment on storage was carried out with the main objective of ensuring safety of human life and our environment. This is the fundamental principle of radiation protection. Safety assessment has been evaluated as a tool in the safety case in the pre-construction, operational and the post closure phase of storage. In particular the iterative process of evaluating and predicting safety scenarios at each stage of the process has proved to be prudent. It is important that this concept be adopted for this type of facility to ensure safety of mankind and the environment now and in the future.

  5. Optimization of safety equipment outages improves safety

    International Nuclear Information System (INIS)

    Cepin, Marko

    2002-01-01

    Testing and maintenance activities of safety equipment in nuclear power plants are an important potential for risk and cost reduction. An optimization method is presented based on the simulated annealing algorithm. The method determines the optimal schedule of safety equipment outages due to testing and maintenance based on minimization of selected risk measure. The mean value of the selected time dependent risk measure represents the objective function of the optimization. The time dependent function of the selected risk measure is obtained from probabilistic safety assessment, i.e. the fault tree analysis at the system level and the fault tree/event tree analysis at the plant level, both extended with inclusion of time requirements. Results of several examples showed that it is possible to reduce risk by application of the proposed method. Because of large uncertainties in the probabilistic safety assessment, the most important result of the method may not be a selection of the most suitable schedule of safety equipment outages among those, which results in similarly low risk. But, it may be a prevention of such schedules of safety equipment outages, which result in high risk. Such finding increases the importance of evaluation speed versus the requirement of getting always the global optimum no matter if it is only slightly better that certain local one

  6. MAPLE-X10 reactor safety assessment

    International Nuclear Information System (INIS)

    Cotnam, K.D.; Lounsbury, R.I.; Gillespie, G.E.

    1990-01-01

    This paper reports on the safety assessment of the 10 MW MAPLE-X10 reactor which has involved a substantial component of PSA analysis to supplement deterministic analysis. Initiating events are identified through the use of a master logic diagram. The events are then examined through event sequence diagrams, at the concept design stage, followed by a set of reliability analyses that are coordinated with the event sequence diagrams. Improvements identified through the reliability analyses are incorporated into the design to ensure that safety objectives are attained

  7. Development and validation of mass spectrometry-based methods for food quality and food safety assessment

    OpenAIRE

    Bignardi, Chiara

    2014-01-01

    In this PhD thesis, analytical chemistry plays a significant role in the assessment of food quality and safety; in particular, three different topics have been addressed to and they are presented into three chapters in which different analytical methodologies have been developed, validated and applied successfully in different topics of food chemistry research. The first chapter is focused on an innovative analytical technique, capillary zone electrophoresis coupled to tandem mass spectrom...

  8. A generalized framework for assessment of safety margins in nuclear power plants

    International Nuclear Information System (INIS)

    Gavrilas, M.; Youngblood, B.; Prelewicz, D.; Meyer, Jim

    2004-01-01

    The protection of public health and safety, and the environment from inadvertent releases of radioactive materials from nuclear power plants relies on the implementation of the defense-in-depth strategy. The term defense-in-depth evolved historically, and thus its application has not always been uniform. The use of the term in the context of the U.S. Nuclear Regulatory Commission (NRC) safety philosophy entails the reliance of a nuclear facility on successive compensatory measures in preventing accidents or mitigating damage caused by malfunctions, accidents, or naturally occurring events. The introduction of probabilistic risk analyses with NUREG-74/014 and subsequent evolution in risk assessment techniques, are leading to the implementation of risk informed regulation to ensure the safety of the public and the environment. Risk informed regulation minimizes the likelihood of overlooking potentially significant accident sequences while limiting unnecessary burdens imposed on licensees. The proposed framework merges fundamental elements of safety regulation: defense-in depth, safety margins and probabilistic risk. It formalizes the relationship between probabilistic risk assessment (PRA) methods and data, and deterministic analyses in a manner consistent with NRC's defense-in-depth philosophy. Succinctly put, the likelihood and consequences of accident scenarios are considered simultaneously and quantified by a plant safety metric. The integration of these fundamental elements into a practically applicable safety framework is consistent with the NRC policy statement on use of probabilistic risk assessment methods and the November 2002 Regulatory Guide on risk informed decisions on plant-specific changes to the licensing basis. Safety information resulting from the application of the framework supersedes traditional safety figures of merit. Safety quantifiers, referred herein as safety indices, expand on the qualifier outcomes that currently accompany fault tree

  9. Intrusion resistant underground structure (IRUS) - safety assessment and licensing

    International Nuclear Information System (INIS)

    Lange, B. A.

    1997-01-01

    This paper describes the safety goals, human exposure scenarios and critical groups, the syvac-nsure performance assessment code, groundwater pathway safety results, and inadvertent human intrusion of the IRUS. 2 tabs

  10. Safety assessment of complex engineered and natural systems: radioactive waste disposal

    International Nuclear Information System (INIS)

    McNeish, J.A.; Vallikat, V.; Atkins, J.; Balady, M.A.

    1997-01-01

    Evaluation of deep, geologic disposal of nuclear waste requires the probabilistic safety assessment of a complex system from the coupling of various processes and sub-systems, parameter and model uncertainties, spatial and temporal variabilities, and the multiplicity of designs and scenarios. Both the engineered and natural system are included in the evaluation. Each system has aspects with considerable uncertainty both in important parameters and in overall conceptual models. The study represented herein provides a probabilistic safety assessment of a potential respository system for multiple engineered barrier system (EBS) design and conceptual model configurations (CRWMS M and O, 1996a) and considers the effects of uncertainty on the overall results. The assessment is based on data and process models available at the time of the study and doesnt necessarily represent the current safety evaluation. In fact, the percolation flux through the repository system is now expected to be higher than the estimate used for this study. The potential effects of higher percolation fluxes are currently under study. The safety of the system was assessed for both 10,000 and 1,000,000 years. Use of alternative conceptual models also produced major improvement in safety. For example, use of a more realistic engineered system release model produced improvement of over an order of magnitude in safety. Alternative measurement locations for the safety assessment produced substantial increases in safety, through the results are based on uncertain dilution factors in the transporting groundwater. (Author)

  11. Safety Culture Perceptions in a Collegiate Aviation Program: A Systematic Assessment

    OpenAIRE

    Adjekum, Daniel Kwasi

    2014-01-01

    An assessment of the perceptions of respondents on the safety culture at an accredited Part 141 four year collegiate aviation program was conducted as part of the implementation of a safety management system (SMS). The Collegiate Aviation Program Safety Culture Assessment Survey (CAPSCAS), which was modified and revalidated from the existing Commercial Aviation Safety Survey (CASS), was used. Participants were drawn from flight students and certified flight instructors in the program. The sur...

  12. The full size validation of remanent life assessment methods

    International Nuclear Information System (INIS)

    Hepworth, J.K.; Williams, J.A.

    1988-03-01

    A range of possible life assessment techniques for the remanent life appraisal of creeping structures is available in the published literature. However, due to the safety implications, the true conservatism of such methods cannot be assessed on operating plant. Consequently, the CEGB set up a four vessel programme in the Pressure Vessel Test Facility at the Marchwood Engineering Laboratories of the CEGB to underwrite and quantify the accuracy of these methods. The application of two non-destructive methods, namely strain monitoring and hardness measurement, to the data generated during about 12,000 hours of testing is examined. The current state of development of these methods is reviewed. Finally, the future CEGB programme relating to these vessels is discussed. (author)

  13. Role and meaning of safety assessment from the point of view of IAEA

    International Nuclear Information System (INIS)

    Lyubarskiy, A.

    2012-01-01

    In 2006, the IAEA published its revised Safety Fundamentals. This states that the ''fundamental safety objective is to protect people and the environment from harmful effects of ionizing radiation''. This objective has to be achieved for all facilities and activities and for all stages over the lifetime of a facility by adherence to ten fundamental principles. This leads, inter alia, to the requirement for a safety assessment to be carried out. In particular, the text accompanying Principle 3 on leadership and management for safety states that: ''3.15. Safety has to be assessed for all facilities and activities, consistent with a graded approach. Safety assessment involves the systematic analysis of normal operation and its effects, of the ways in which failures might occur and of the consequences of such failures. Safety assessments cover the safety measures necessary to control the hazard, and the design and engineered safety features are assessed to demonstrate that they fulfill the safety functions required of them. Where control measures or operator actions are called on to maintain safety, an initial safety assessment has to be carried out to demonstrate that the arrangements made are robust and that they can be relied on. A facility may only be constructed and commissioned or an activity may only be commenced once it has been demonstrated to the satisfaction of the regulatory body that the proposed safety measures are adequate.'' Principle 3 further states that the process of safety assessment for facilities and activities is repeated in the conduct of operations in order to take into account changed circumstances (such as the application of new standards or scientific and technological developments), the feedback of operating experience, modifications and the effects of ageing. Continuation of operations over long periods of time requires reassessments demonstrating that the safety measures remain adequate. (orig.)

  14. Methodology for Safety Assessment Applied to Predisposal Waste Management. Report of the Results of the International Project on Safety Assessment Driving Radioactive Waste Management Solutions (SADRWMS) 2004–2010)

    International Nuclear Information System (INIS)

    2015-12-01

    Report of the Results of the International Project on Safety Assessment Driving Radioactive Waste Management Solutions (SADRWMS) (2004–2010) The IAEA’s progamme on Safety Assessment Driving Radioactive Waste Management Solutions (SADRWMS) focused on approaches and mechanisms for application of safety assessment methodologies for the predisposal management of radioactive waste. The initial outcome of the SADRWMS Project was achieved through the development of flowcharts, which have since been incorporated into IAEA Safety Standards Series No. GSG-3, Safety Case and Safety Assessment for Predisposal Management of Radioactive Waste. In 2005, an initial specification was developed for the Safety Assessment Framework (SAFRAN) software tool to apply the SADRWMS flowcharts. In 2008, an in-depth application of the SAFRAN tool and the SADRWMS methodology was carried out on the predisposal management facilities of the Thailand Institute of Nuclear Technology Radioactive Waste Management Centre (TINT Facility). This publication summarizes the content and outcomes of the SADRWMS programme. The Chairman’s Report of the SADRWMS Project and the Report of the TINT test case are provided on the CD-ROM which accompanies this report

  15. Assessment methods in surgical training in the United Kingdom

    Directory of Open Access Journals (Sweden)

    Evgenios Evgeniou

    2013-02-01

    Full Text Available A career in surgery in the United Kingdom demands a commitment to a long journey of assessment. The assessment methods used must ensure that the appropriate candidates are selected into a programme of study or a job and must guarantee public safety by regulating the progression of surgical trainees and the certification of trained surgeons. This review attempts to analyse the psychometric properties of various assessment methods used in the selection of candidates to medical school, job selection, progression in training, and certification. Validity is an indicator of how well an assessment measures what it is designed to measure. Reliability informs us whether a test is consistent in its outcome by measuring the reproducibility and discriminating ability of the test. In the long journey of assessment in surgical training, the same assessment formats are frequently being used for selection into a programme of study, job selection, progression, and certification. Although similar assessment methods are being used for different purposes in surgical training, the psychometric properties of these assessment methods have not been examined separately for each purpose. Because of the significance of these assessments for trainees and patients, their reliability and validity should be examined thoroughly in every context where the assessment method is being used.

  16. Progress in Methodologies for the Assessment of Passive Safety System Reliability in Advanced Reactors. Results from the Coordinated Research Project on Development of Advanced Methodologies for the Assessment of Passive Safety Systems Performance in Advanced Reactors

    International Nuclear Information System (INIS)

    2014-09-01

    Strong reliance on inherent and passive design features has become a hallmark of many advanced reactor designs, including several evolutionary designs and nearly all advanced small and medium sized reactor (SMR) designs. Advanced nuclear reactor designs incorporate several passive systems in addition to active ones — not only to enhance the operational safety of the reactors but also to eliminate the possibility of serious accidents. Accordingly, the assessment of the reliability of passive safety systems is a crucial issue to be resolved before their extensive use in future nuclear power plants. Several physical parameters affect the performance of a passive safety system, and their values at the time of operation are unknown a priori. The functions of passive systems are based on basic physical laws and thermodynamic principals, and they may not experience the same kind of failures as active systems. Hence, consistent efforts are required to qualify the reliability of passive systems. To support the development of advanced nuclear reactor designs with passive systems, investigations into their reliability using various methodologies are being conducted in several Member States with advanced reactor development programmes. These efforts include reliability methods for passive systems by the French Atomic Energy and Alternative Energies Commission, reliability evaluation of passive safety system by the University of Pisa, Italy, and assessment of passive system reliability by the Bhabha Atomic Research Centre, India. These different approaches seem to demonstrate a consensus on some aspects. However, the developers of the approaches have been unable to agree on the definition of reliability in a passive system. Based on these developments and in order to foster collaboration, the IAEA initiated the Coordinated Research Project (CRP) on Development of Advanced Methodologies for the Assessment of Passive Safety Systems Performance in Advanced Reactors in 2008. The

  17. Safety assessment of human and organizational factors in French fuel cycle facilities

    International Nuclear Information System (INIS)

    Menuet, Lise; Beauquier, Sophie

    2013-01-01

    According to the French law, each nuclear facility has to provide a safety demonstration every ten years. The assessment of this demonstration supports the decision of the French Safety Authority regarding the authorisation of operating for the ten years to come. In addition, transversal topics, which are linked with safety performance, such as safety management, management of competencies, maintenance's policy are periodically evaluated. One aspect of these assessments relates to Human and Organizational Factors (HOF) and their contribution to safety. Our communication will describe the assessment of the HOF-related part, performed by the Institute for Radioprotection and Nuclear Safety Institute (IRSN) the Technical Support Organisation of the French Safety Authority). It will focus on the methodological framework, the tools which are developed and used for assessing the integration of HOF in safety demonstration, and the main difficulties of this kind of assessment. Each situation will be illustrated by concrete examples coming from safety assessments concerning fuel cycle's plants: Areva's plants dedicated to uranium conversion, uranium enrichment, fuel manufacturing, spent fuel reprocessing, treatment facilities and CEA's laboratories dedicated to research and development and to interim spent fuel storage. The methodological framework for assessing HOF currently implements three main steps which will be precisely described: - checking that the nuclear plant has made an exhaustive analysis of the risks linked with HOF. Regarding to HOF, the Licensee safety demonstration is based on the description of the main human activities which are considered as hazardous regarding safety. These activities are accomplished with a human contribution and they require a safe realisation. - assessing the human, organisational and technical barriers that the nuclear plant have planed in order to make the operations safe, to avoid, prevent or detect an

  18. Health economics and outcomes methods in risk-based decision-making for blood safety.

    Science.gov (United States)

    Custer, Brian; Janssen, Mart P

    2015-08-01

    Analytical methods appropriate for health economic assessments of transfusion safety interventions have not previously been described in ways that facilitate their use. Within the context of risk-based decision-making (RBDM), health economics can be important for optimizing decisions among competing interventions. The objective of this review is to address key considerations and limitations of current methods as they apply to blood safety. Because a voluntary blood supply is an example of a public good, analyses should be conducted from the societal perspective when possible. Two primary study designs are recommended for most blood safety intervention assessments: budget impact analysis (BIA), which measures the cost to implement an intervention both to the blood operator but also in a broader context, and cost-utility analysis (CUA), which measures the ratio between costs and health gain achieved, in terms of reduced morbidity and mortality, by use of an intervention. These analyses often have important limitations because data that reflect specific aspects, for example, blood recipient population characteristics or complication rates, are not available. Sensitivity analyses play an important role. The impact of various uncertain factors can be studied conjointly in probabilistic sensitivity analyses. The use of BIA and CUA together provides a comprehensive assessment of the costs and benefits from implementing (or not) specific interventions. RBDM is multifaceted and impacts a broad spectrum of stakeholders. Gathering and analyzing health economic evidence as part of the RBDM process enhances the quality, completeness, and transparency of decision-making. © 2015 AABB.

  19. Risk monitor - a tool for operational safety assessment risk monitor - user's manual

    International Nuclear Information System (INIS)

    Hari Prasad, M.; Vinod, Gopika; Saraf, R.K.; Ghosh, A.K.

    2006-06-01

    Probabilistic Safety Assessment has become a key tool as on today to identify and understand Nuclear Power Plant vulnerabilities. As a result of the availability of these PSA studies, there is a desire to use them to enhance plant safety and to operate the nuclear stations in the most efficient manner. Risk Monitor is a PC based tool, which computes the real time safety level and assists plant personnel to manage day-to-day activities. Risk Monitor is a PC based user friendly software tool used for modification and re-analysis of a nuclear Power plant. Operation of Risk Monitor is based on PSA methods for assisting in day to day applications. Risk Monitoring programs can assess the risk profile and are used to optimize the operation of Nuclear Power Plants with respect to a minimum risk level over the operating time. This report presents the background activities of Risk Monitor, its application areas and the step by step procedure for the user.to interact with the software. This software can be used with the PSA model of any Nuclear Power Plant. (author)

  20. Application of Software Safety Analysis Methods

    International Nuclear Information System (INIS)

    Park, G. Y.; Hur, S.; Cheon, S. W.; Kim, D. H.; Lee, D. Y.; Kwon, K. C.; Lee, S. J.; Koo, Y. H.

    2009-01-01

    A fully digitalized reactor protection system, which is called the IDiPS-RPS, was developed through the KNICS project. The IDiPS-RPS has four redundant and separated channels. Each channel is mainly composed of a group of bistable processors which redundantly compare process variables with their corresponding setpoints and a group of coincidence processors that generate a final trip signal when a trip condition is satisfied. Each channel also contains a test processor called the ATIP and a display and command processor called the COM. All the functions were implemented in software. During the development of the safety software, various software safety analysis methods were applied, in parallel to the verification and validation (V and V) activities, along the software development life cycle. The software safety analysis methods employed were the software hazard and operability (Software HAZOP) study, the software fault tree analysis (Software FTA), and the software failure modes and effects analysis (Software FMEA)

  1. Economic aspects of risk assessment in chemical safety

    Energy Technology Data Exchange (ETDEWEB)

    Drummond, M F; Shannon, H S

    1986-05-01

    This paper considers how the economic aspects of risk assessment in chemical safety can be strengthened. Its main focus is on how economic appraisal techniques, such as cost-benefit and cost-effectiveness analysis, can be adapted to the requirements of the risk-assessment process. Following a discussion of the main methodological issues raised by the use of economic appraisal, illustrated by examples from the health and safety field, a number of practical issues are discussed. These include the consideration of the distribution of costs, effects and benefits, taking account of uncertainty, risk probabilities and public perception, making the appraisal techniques useful to the early stages of the risk-assessment process and structuring the appraisal to permit continuous feedback to the participants in the risk-assessment process. It is concluded that while the way of thinking embodied in economic appraisal is highly relevant to the consideration of choices in chemical safety, the application of these principles in formal analysis of risk reduction procedures presents a more mixed picture. The main suggestions for improvement in the analyses performed are the undertaking of sensitivity analyses of study results to changes in the key assumptions, the presentation of the distribution of costs and benefits by viewpoint, the comparison of health and safety measures in terms of their incremental cost per life-year (or quality-adjusted life-year) gained and the more frequent retrospective review and revision of the economic analyses that are undertaken.

  2. Systematic evaluation of non-animal test methods for skin sensitisation safety assessment

    NARCIS (Netherlands)

    Reisinger, K.; Hoffmann, S.; Alépée, N.; Ashikaga, T.; Barroso, J.; Elcombe, C.; Gellatly, N.; Galbiati, V.; Gibbs, S.; Groux, H.; Hibatallah, J.; Keller, D.; Kern, P.; Klaric, M.; Kolle, S.; Kuehnl, J.; Lambrechts, N.; Lindstedt, M.; Millet, M.; Martinozzi-Teissier, S.; Natsch, A.; Petersohn, D.; Pike, I.; Sakaguchi, H.; Schepky, A.; Tailhardat, M.; Templier, M.; van Vliet, E; Maxwell, G.

    2015-01-01

    The need for non-animal data to assess skin sensitisation properties of substances, especially cosmetics ingredients, has spawned the development of many in vitro methods. As it is widely believed that no single method can provide a solution, the Cosmetics Europe Skin Tolerance Task Force has

  3. The role of probabilistic safety assessment in the design

    International Nuclear Information System (INIS)

    Green, A.; Ingham, E.L.

    1989-01-01

    The use of probabilistic safety assessment (PSA) for Heysham 2 and Torness marked a major change in the design approach to nuclear safety within the U.K. Design Safety Guidelines incorporating probabilistic safety targets required that design justification would necessitate explicit consideration of the consequence of accidents in relation to their frequency. The paper discusses these safety targets and their implications, the integration of PSA into the design process and an outline of the methodology. The influence of PSA on the design is discussed together with its role in the overall demonstration of reactor safety. (author)

  4. Selected component failure rate values from fusion safety assessment tasks

    Energy Technology Data Exchange (ETDEWEB)

    Cadwallader, L.C.

    1998-09-01

    This report is a compilation of component failure rate and repair rate values that can be used in magnetic fusion safety assessment tasks. Several safety systems are examined, such as gas cleanup systems and plasma shutdown systems. Vacuum system component reliability values, including large vacuum chambers, have been reviewed. Values for water cooling system components have also been reported here. The report concludes with the examination of some equipment important to personnel safety, atmospheres, combustible gases, and airborne releases of radioactivity. These data should be useful to system designers to calculate scoping values for the availability and repair intervals for their systems, and for probabilistic safety or risk analysts to assess fusion systems for safety of the public and the workers.

  5. Selected Component Failure Rate Values from Fusion Safety Assessment Tasks

    Energy Technology Data Exchange (ETDEWEB)

    Cadwallader, Lee Charles

    1998-09-01

    This report is a compilation of component failure rate and repair rate values that can be used in magnetic fusion safety assessment tasks. Several safety systems are examined, such as gas cleanup systems and plasma shutdown systems. Vacuum system component reliability values, including large vacuum chambers, have been reviewed. Values for water cooling system components have also been reported here. The report concludes with the examination of some equipment important to personnel safety, atmospheres, combustible gases, and airborne releases of radioactivity. These data should be useful to system designers to calculate scoping values for the availability and repair intervals for their systems, and for probabilistic safety or risk analysts to assess fusion systems for safety of the public and the workers.

  6. Selected component failure rate values from fusion safety assessment tasks

    International Nuclear Information System (INIS)

    Cadwallader, L.C.

    1998-01-01

    This report is a compilation of component failure rate and repair rate values that can be used in magnetic fusion safety assessment tasks. Several safety systems are examined, such as gas cleanup systems and plasma shutdown systems. Vacuum system component reliability values, including large vacuum chambers, have been reviewed. Values for water cooling system components have also been reported here. The report concludes with the examination of some equipment important to personnel safety, atmospheres, combustible gases, and airborne releases of radioactivity. These data should be useful to system designers to calculate scoping values for the availability and repair intervals for their systems, and for probabilistic safety or risk analysts to assess fusion systems for safety of the public and the workers

  7. Ground assessment methods for nuclear power plant

    International Nuclear Information System (INIS)

    1985-01-01

    It is needless to say that nuclear power plant must be constructed on the most stable and safe ground. Reliable assessment method is required for the purpose. The Ground Integrity Sub-committee of the Committee of Civil Engineering of Nuclear Power Plant started five working groups, the purpose of which is to systematize the assessment procedures including geological survey, ground examination and construction design. The works of working groups are to establishing assessment method of activities of faults, standardizing the rock classification method, standardizing assessment and indication method of ground properties, standardizing test methods and establishing the application standard for design and construction. Flow diagrams for the procedures of geological survey, for the investigation on fault activities and ground properties of area where nuclear reactor and important outdoor equipments are scheduled to construct, were established. And further, flow diagrams for applying investigated results to design and construction of plant, and for determining procedure of liquidification nature of ground etc. were also established. These systematized and standardized methods of investigation are expected to yield reliable data for assessment of construction site of nuclear power plant and lead to the safety of construction and operation in the future. In addition, the execution of these systematized and detailed preliminary investigation for determining the construction site of nuclear power plant will make much contribution for obtaining nation-wide understanding and faith for the project. (Ishimitsu, A.)

  8. Use of a risk assessment method to improve the safety of negative pressure wound therapy.

    Science.gov (United States)

    Lelong, Anne-Sophie; Martelli, Nicolas; Bonan, Brigitte; Prognon, Patrice; Pineau, Judith

    2014-06-01

    To conduct a risk analysis of the negative pressure wound therapy (NPWT) care process and to improve the safety of NPWT, a working group of nurses, hospital pharmacists, physicians and hospital managers performed a risk analysis for the process of NPWT care. The failure modes, effects and criticality analysis (FMECA) method was used for this analysis. Failure modes and their consequences were defined and classified as a function of their criticality to identify priority actions for improvement. By contrast to classical FMECA, the criticality index (CI) of each consequence was calculated by multiplying occurrence, severity and detection scores. We identified 13 failure modes, leading to 20 different consequences. The CI of consequences was initially 712, falling to 357 after corrective measures were implemented. The major improvements proposed included the establishment of 6-monthly training cycles for nurses, physicians and surgeons and the introduction of computerised prescription for NPWT. The FMECA method also made it possible to prioritise actions as a function of the criticality ranking of consequences and was easily understood and used by the working group. This study is, to our knowledge, the first to use the FMECA method to improve the safety of NPWT. © 2012 The Authors. International Wound Journal © 2012 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

  9. Safety Assessment of Talc as Used in Cosmetics.

    Science.gov (United States)

    Fiume, Monice M; Boyer, Ivan; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2015-01-01

    The Cosmetic Ingredient Review Expert Panel (Panel) assessed the safety of talc for use in cosmetics. The safety of talc has been the subject of much debate through the years, partly because the relationship between talc and asbestos is commonly misunderstood. Industry specifications state that cosmetic-grade talc must contain no detectable fibrous, asbestos minerals. Therefore, the large amount of available animal and clinical data the Panel relied on in assessing the safety of talc only included those studies on talc that did not contain asbestos. The Panel concluded that talc is safe for use in cosmetics in the present practices of use and concentration (some cosmetic products are entirely composed of talc). Talc should not be applied to the skin when the epidermal barrier is missing or significantly disrupted. © The Author(s) 2015.

  10. Effects of patient safety auditing in hospital care: results of a mixed-method evaluation (part 1).

    Science.gov (United States)

    Hanskamp-Sebregts, Mirelle; Zegers, Marieke; Westert, Gert P; Boeijen, Wilma; Teerenstra, Steven; van Gurp, Petra J; Wollersheim, Hub

    2018-06-15

    To evaluate the effectiveness of internal auditing in hospital care focussed on improving patient safety. A before-and-after mixed-method evaluation study was carried out in eight departments of a university medical center in the Netherlands. Internal auditing and feedback focussed on improving patient safety. The effect of internal auditing was assessed 15 months after the audit, using linear mixed models, on the patient, professional, team and departmental levels. The measurement methods were patient record review on adverse events (AEs), surveys regarding patient experiences, safety culture and team climate, analysis of administrative hospital data (standardized mortality rate, SMR) and safety walk rounds (SWRs) to observe frontline care processes on safety. The AE rate decreased from 36.1% to 31.3% and the preventable AE rate from 5.5% to 3.6%; however, the differences before and after auditing were not statistically significant. The patient-reported experience measures regarding patient safety improved slightly over time (P audit. The SWRs showed that medication safety and information security were improved (P auditing was associated with improved patient experiences and observed safety on wards. No effects were found on adverse outcomes, safety culture and team climate 15 months after the internal audit.

  11. Environment, safety and health progress assessment manual

    International Nuclear Information System (INIS)

    1992-12-01

    On June 27, 1989, the Secretary of Energy announced a 10-Point Initiative to strengthen environment, safety, and health (ES ampersand H) programs, and waste management activities at DOE production, research, and testing facilities. One of the points involved conducting dent Tiger Team Assessments of DOE operating facilities. The Office of Special independent Projects (OSP), EH-5, in the Office of the Assistant Secretary for Environment, Safety and Health, EH-1, was assigned the responsibility to conduct the Tiger Team Assessments. Through June 1992, a total of 35 Tiger Team Assessments were completed. The Secretary directed that Corrective Action Plans be developed and implemented to address the concerns identified by the Tiger Teams. In March 1991, the Secretary approved a plan for assessments that are ''more focused, concentrating on ES ampersand H management, ES ampersand H corrective actions, self-assessment programs, and root-cause related issues.'' In July 1991, the Secretary approved the initiation of ES ampersand H Progress Assessments, as a followup to the Tiger Team Assessments, and in the continuing effort to institutionalize the self-assessment process and line management accountability in the ES ampersand H areas. This manual documents the processes to be used to perform the ES ampersand H Progress Assessments. It was developed based upon the lessons learned from Tiger Team Assessments, the two pilot Progress Assessments, and Progress Assessments that have been completed. The manual will be updated periodically to reflect lessons learned or changes in policy

  12. Application of REPAS Methodology to Assess the Reliability of Passive Safety Systems

    Directory of Open Access Journals (Sweden)

    Franco Pierro

    2009-01-01

    Full Text Available The paper deals with the presentation of the Reliability Evaluation of Passive Safety System (REPAS methodology developed by University of Pisa. The general objective of the REPAS is to characterize in an analytical way the performance of a passive system in order to increase the confidence toward its operation and to compare the performances of active and passive systems and the performances of different passive systems. The REPAS can be used in the design of the passive safety systems to assess their goodness and to optimize their costs. It may also provide numerical values that can be used in more complex safety assessment studies and it can be seen as a support to Probabilistic Safety Analysis studies. With regard to this, some examples in the application of the methodology are reported in the paper. A best-estimate thermal-hydraulic code, RELAP5, has been used to support the analyses and to model the selected systems. Probability distributions have been assigned to the uncertain input parameters through engineering judgment. Monte Carlo method has been used to propagate uncertainties and Wilks' formula has been taken into account to select sample size. Failure criterions are defined in terms of nonfulfillment of the defined design targets.

  13. Assessing and improving the safety culture of non-power nuclear installations

    International Nuclear Information System (INIS)

    Bastin, S.J.; Cameron, R.F.; McDonald, N.R.; Adams, A.; Williamson, A.

    2000-01-01

    The development and application of safety culture principles has understandably focused on nuclear power plant and fuel cycle facilities and has been based on studies in Europe, North America, Japan and Korea. However, most radiation injuries and deaths have resulted from the mishandling of radioactive sources, inadvertent over-exposure to X-rays and critically incidents, unrelated to nuclear power plant. Within the Forum on Nuclear Cooperation in Asia (FNCA), Australia has been promoting initiatives to apply safety culture principles across all nuclear and radiation application activities and in a manner that is culturally appropriate for Asian countries. ANSTO initiated a Safety Culture Project in 1996 to develop methods for assessing and improving safety culture at nuclear and radiation installations other than power reactors and to trial these at ANSTO and in the Asian region. The project has sensibly drawn on experience from the nuclear power industry, particularly in Japan and Korea. There has been a positive response in the participating countries to addressing safety culture issues in non-power nuclear facilities. This paper reports on the main achievements of the project. Further goals of the project are also identified. (author)

  14. Safety and Waste Management for SAM Pathogen Methods

    Science.gov (United States)

    The General Safety and Waste Management page offers section-specific safety and waste management details for the pathogens included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  15. Safety and Waste Management for SAM Biotoxin Methods

    Science.gov (United States)

    The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  16. Assessment of Safety Standards for Automotive Electronic Control Systems

    Science.gov (United States)

    2016-06-01

    This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

  17. Plasma-safety assessment model and safety analyses of ITER

    International Nuclear Information System (INIS)

    Honda, T.; Okazaki, T.; Bartels, H.-H.; Uckan, N.A.; Sugihara, M.; Seki, Y.

    2001-01-01

    A plasma-safety assessment model has been provided on the basis of the plasma physics database of the International Thermonuclear Experimental Reactor (ITER) to analyze events including plasma behavior. The model was implemented in a safety analysis code (SAFALY), which consists of a 0-D dynamic plasma model and a 1-D thermal behavior model of the in-vessel components. Unusual plasma events of ITER, e.g., overfueling, were calculated using the code and plasma burning is found to be self-bounded by operation limits or passively shut down due to impurity ingress from overheated divertor targets. Sudden transition of divertor plasma might lead to failure of the divertor target because of a sharp increase of the heat flux. However, the effects of the aggravating failure can be safely handled by the confinement boundaries. (author)

  18. Thermal reactor safety

    International Nuclear Information System (INIS)

    1980-06-01

    Information is presented concerning new trends in licensing; seismic considerations and system structural behavior; TMI-2 risk assessment and thermal hydraulics; statistical assessment of potential accidents and verification of computational methods; issues with respect to improved safety; human factors in nuclear power plant operation; diagnostics and activities in support of recovery; LOCA transient analysis; unresolved safety issues and other safety considerations; and fission product transport

  19. Thermal reactor safety

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    Information is presented concerning new trends in licensing; seismic considerations and system structural behavior; TMI-2 risk assessment and thermal hydraulics; statistical assessment of potential accidents and verification of computational methods; issues with respect to improved safety; human factors in nuclear power plant operation; diagnostics and activities in support of recovery; LOCA transient analysis; unresolved safety issues and other safety considerations; and fission product transport.

  20. Safety Assessment in Installation of Precast Concrete

    Directory of Open Access Journals (Sweden)

    Yashrri S.N.

    2014-03-01

    Full Text Available This study was carried out to identify the safety aspects and the level of safety during the installation process in construction sites. A questionnaire survey and interviews were done to provide data on safety requirements in precast concrete construction. All of the interviews and the research questionnaire survey were conducted among contractors that are registered as class 1 to class 7 with the Construction Industry Development Board (CIDB and class A to class G with Pusat Khidmat Kontraktor (PKK in Penang. Returned questionnaires were analysed with the use of simple percentages and the Likert Scale analysis method to identify safety aspects of precast construction. The results indicate that the safety aspect implemented by companies involved in the precast construction process is at a good level in the safety aspect during bracing, propping, welding and grouting processes and at a very good level of safety in general aspects and safety aspects during lifting processes.

  1. Probabilistic safety assessment activities at Ignalina NPP

    International Nuclear Information System (INIS)

    Bagdonas, A.

    1999-01-01

    The Barselina Project was initiated in the summer 1991. The project was a multilateral co-operation between Lithuania, Russia and Sweden up until phase 3, and phase 4 has been performed as a bilateral between Lithuania and Sweden. The long-range objective is to establish common perspectives and unified bases for assessment of severe accident risks and needs for remedial measures for the RBMK reactors. During phase 3, from 1993 to 1994, a full scope Probabilistic Safety Analysis (PSA) model of the Ignalina Nuclear Power Plant unit 2 was developed to identify possible safety improvement of risk importance. The probabilistic methodology was applied on a plant specific basis for a channel type reactor of RBMK design. During phase 4, from 1994 to 1996, the PSA was further developed, taking into account plant changes, improved modelling methods and extended plant information concerning dependencies (area events, dynamic effects, electrical and signal dependencies). The model reflected the plant status before the outage 1996. During phase 4+, 1998 to 1999 the PSA model was upgraded taking into account the newest plant modifications. The new PSA model of CPS/AZRT was developed. Modelling was based on the Single Failure Analysis

  2. Safety evaluation by living probabilistic safety assessment. Procedures and applications for planning of operational activities and analysis of operating experience

    International Nuclear Information System (INIS)

    Johanson, Gunnar; Holmberg, J.

    1994-01-01

    Living Probabilistic Safety Assessment (PSA) is a daily safety management system and it is based on a plant-specific PSA and supporting information systems. In the living use of PSA, plant status knowledge is used to represent actual plant safety status in monitoring or follow-up perspective. The PSA model must be able to express the risk at a given time and plant configuration. The process, to update the PSA model to represent the current or planned configuration and to use the model to evaluate and direct the changes in the configuration, is called living PSA programme. The main purposes to develop and increase the usefulness of living PSA are: Long term safety planning: To continue the risk assessment process started with the basic PSA by extending and improving the basic models and data to provide a general risk evaluation tool for analyzing the safety effects of changes in plant design and procedures. Risk planning of operational activities: To support the operational management by providing means for searching optimal operational maintenance and testing strategies from the safety point of view. The results provide support for risk decision making in the short term or in a planning mode. The operational limits and conditions given by technical specifications can be analyzed by evaluating the risk effects of alternative requirements in order to balance the requirements with respect to operational flexibility and plant economy. Risk analysis of operating experience: To provide a general risk evaluation tool for analyzing the safety effects of incidents and plant status changes. The analyses are used to: identify possible high risk situations, rank the occurred events from safety point of view, and get feedback from operational events for the identification of risk contributors. This report describes the methods, models and applications required to continue the process towards a living use of PSA. 19 tabs, 20 figs

  3. Dependencies, human interactions and uncertainties in probabilistic safety assessment

    International Nuclear Information System (INIS)

    Hirschberg, S.

    1990-01-01

    In the context of Probabilistic Safety Assessment (PSA), three areas were investigated in a 4-year Nordic programme: dependencies with special emphasis on common cause failures, human interactions and uncertainty aspects. The approach was centered around comparative analyses in form of Benchmark/Reference Studies and retrospective reviews. Weak points in available PSAs were identified and recommendations were made aiming at improving consistency of the PSAs. The sensitivity of PSA-results to basic assumptions was demonstrated and the sensitivity to data assignment and to choices of methods for analysis of selected topics was investigated. (author)

  4. Safety assessment for the above ground storage of Cadmium Safety and Control Rods at the Solid Waste Management Facility

    International Nuclear Information System (INIS)

    Shaw, K.W.

    1993-11-01

    The mission of the Savannah River Site is changing from radioisotope production to waste management and environmental restoration. As such, Reactor Engineering has recently developed a plan to transfer the safety and control rods from the C, K, L, and P reactor disassembly basin areas to the Transuranic (TRU) Waste Storage Pads for long-term, retrievable storage. The TRU pads are located within the Solid Waste Management Facilities at the Savannah River Site. An Unreviewed Safety Question (USQ) Safety Evaluation has been performed for the proposed disassembly basin operations phase of the Cadmium Safety and Control Rod Project. The USQ screening identified a required change to the authorization basis; however, the Proposed Activity does not involve a positive USQ Safety Evaluation. A Hazard Assessment for the Cadmium Safety and Control Rod Project determined that the above-ground storage of the cadmium rods results in no change in hazard level at the TRU pads. A Safety Assessment that specifically addresses the storage (at the TRU pads) phase of the Cadmium Safety and Control Rod Project has been performed. Results of the Safety Assessment support the conclusion that a positive USQ is not involved as a result of the Proposed Activity

  5. Review and assessment of nuclear facilities by the regulatory body. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    The purpose of this Safety Guide is to provide recommendations for regulatory bodies on reviewing and assessing the various safety related submissions made by the operator of a nuclear facility at different stages (siting, design, construction, commissioning, operation and decommissioning or closure) in the facility's lifetime to determine whether the facility complies with the applicable safety objectives and requirements. This Safety Guide covers the review and assessment of submissions in relation to the safety of nuclear facilities such as: enrichment and fuel manufacturing plants. Nuclear power plants. Other reactors such as research reactors and critical assemblies. Spent fuel reprocessing plants. And facilities for radioactive waste management, such as treatment, storage and disposal facilities. This Safety Guide also covers issues relating to the decommissioning of nuclear facilities, the closure of waste disposal facilities and site rehabilitation. Objectives, management, planning and organizational matters relating to the review and assessment process are presented in Section 2. Section 3 deals with the bases for decision making and conduct of the review and assessment process. Section 4 covers aspects relating to the assessment of this process. The Appendix provides a generic list of topics to be covered in the review and assessment process

  6. Review and assessment of nuclear facilities by the regulatory body. Safety guide

    International Nuclear Information System (INIS)

    2005-01-01

    The purpose of this Safety Guide is to provide recommendations for regulatory bodies on reviewing and assessing the various safety related submissions made by the operator of a nuclear facility at different stages (siting, design, construction, commissioning, operation and decommissioning or closure) in the facility's lifetime to determine whether the facility complies with the applicable safety objectives and requirements. This Safety Guide covers the review and assessment of submissions in relation to the safety of nuclear facilities such as: enrichment and fuel manufacturing plants. Nuclear power plants. Other reactors such as research reactors and critical assemblies. Spent fuel reprocessing plants. And facilities for radioactive waste management, such as treatment, storage and disposal facilities. This Safety Guide also covers issues relating to the decommissioning of nuclear facilities, the closure of waste disposal facilities and site rehabilitation. Objectives, management, planning and organizational matters relating to the review and assessment process are presented in Section 2. Section 3 deals with the bases for decision making and conduct of the review and assessment process. Section 4 covers aspects relating to the assessment of this process. The Appendix provides a generic list of topics to be covered in the review and assessment process

  7. Safety assessment guidance in the International Atomic Energy Agency RADWASS Program

    Energy Technology Data Exchange (ETDEWEB)

    Vovk, I.F.; Seitz, R.R.

    1995-12-31

    The IAEA RADWASS programme is aimed at establishing a coherent and comprehensive set of principles and standards for the safe management of waste and formulating the guidelines necessary for their application. A large portion of this programme has been devoted to safety assessments for various waste management activities. Five Safety Guides are planned to be developed to provide general guidance to enable operators and regulators to develop necessary framework for safety assessment process in accordance with international recommendations. They cover predisposal, near surface disposal, geological disposal, uranium/thorium mining and milling waste, and decommissioning and environmental restoration. The Guide on safety assessment for near surface disposal is at the most advanced stage of preparation. This draft Safety Guide contains guidance on description of the disposal system, development of a conceptual model, identification and description of relevant scenarios and pathways, consequence analysis, presentation of results and confidence building. The set of RADWASS publications is currently undergoing in-depth review to ensure a harmonized approach throughout the Safety Series.

  8. Safety and Waste Management for SAM Chemistry Methods

    Science.gov (United States)

    The General Safety and Waste Management page offers section-specific safety and waste management details for the chemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  9. Safety and Waste Management for SAM Radiochemical Methods

    Science.gov (United States)

    The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  10. Safety assessment of a steel frame using LRFD and SBRA methods

    Czech Academy of Sciences Publication Activity Database

    Václavek, L.; Chen, I.H.; Marek, Pavel

    2010-01-01

    Roč. 15, č. 1 (2010), s. 63-72 ISSN 1084-0680 R&D Projects: GA ČR(CZ) GA103/07/0557 Institutional research plan: CEZ:AV0Z20710524 Keywords : structural reliability * probabilistic reliability assessment, * Monte Carlo method Subject RIV: JM - Building Engineering

  11. Topical session proceedings of the 5. IGSC meeting on: observations regarding the safety case in recent safety assessment studies

    International Nuclear Information System (INIS)

    Hooper, Alan J.; Voinis, Sylvie; Van Luik, Abraham E.

    2004-01-01

    Within the NEA, the IGSC (Integration Group for the Safety Case) has, as an essential role, to develop common views on such key aspects of the safety case. Therefore, since the inauguration of the IGSC in 2000, four meetings were organised with topical sessions to explore various of these key aspects. This is a report on the fifth such topical session, held as part of the 5. plenary meeting of the IGSC. The session was attended by 36 participants, representing waste management organisations and regulatory authorities from 16 NEA member countries, the IAEA and the European Commission. The purpose of this topical session was to provide support to the finalising of the IGSC safety case brochure by getting a description of the safety case content of the IAEA Draft Safety Requirements document and by getting an overview of progress that could be observed from national organisations on developing their cases for system safety and/or developing the required methodologies. The objective was that the IGSC safety case brochure should be supportive of the IAEA/NEA document, and be reflective of the experience of the IGSC member programmes and organisations. The topical session was mainly aimed at exchanging information on: - The safety case related content of the proposed IAEA/NEA document (currently titled: 'IAEA Safety Standards Series, Geological Disposal of Radioactive Waste, Draft Safety Requirements (DS-154)'). - National programmes where safety assessments have recently been completed, e.g. ONDRAF/NIRAS, Nagra and Andra. - Feedback from international peer reviews, e.g. the Andra Dossier 2001 Argile, the Belgian SAFIR 2 report, the SR 97 report and the US-DOE Yucca Mountain TSPA. - The evolution of some national assessment methods and approaches e.g. SKB and Nagra. - The content of the draft IGSC safety case brochure entitled: 'The Nature and Purpose of the Post-closure Safety Case in Geological Disposal'. This document presents the various

  12. Nuclear utility self-assessment as viewed by the corporate nuclear safety committee

    International Nuclear Information System (INIS)

    Corcoran, W.R.

    1992-01-01

    This paper discusses how corporate nuclear safety committees use the principles of self-assessment to enhance nuclear power plant safety performance. Corporate nuclear safety committees function to advise the senior nuclear power executive on matters affecting nuclear safety. These committees are required by the administrative controls section of the plant technical specifications which are part of the final safety analysis report and the operating license. Committee membership includes senior utility executives, executives from sister utilities, utility senior technical experts, and outside consultants. Current corporate nuclear safety committees often have a finely tuned intuitive feel for self-assessment that they use to probe the underlying opportunities for quality and safety enhancements. The questions prompted by the self-assessment orientation enable the utility line organization members to gain better perspectives on the characteristics of the organizational systems that they manage and work in

  13. The complementary roles of fracture mechanics and non-destructive examination in the safety assessment of components

    International Nuclear Information System (INIS)

    1988-01-01

    This document presents the various speeches of the workshop of the Committee on Safety of Nuclear Installations (CSNI) that took place in Wuerenligen, Switzerland, in October 1988. The speeches deal with the roles of Non-Destructive Examination (NDE) and Fracture Mechanics (FM) in the safety assessment of reactor components, such as pressure vessels. Some calibration standards and reference values of defects are presented, and several NDE and FM methods for the assessment of components are described. Separate abstracts were prepared for all the papers in this volume. (TEC)

  14. The complementary roles of fracture mechanics and non-destructive examination in the safety assessment of components

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-12-31

    This document presents the various speeches of the workshop of the Committee on Safety of Nuclear Installations (CSNI) that took place in Wuerenligen, Switzerland, in October 1988. The speeches deal with the roles of Non-Destructive Examination (NDE) and Fracture Mechanics (FM) in the safety assessment of reactor components, such as pressure vessels. Some calibration standards and reference values of defects are presented, and several NDE and FM methods for the assessment of components are described. Separate abstracts were prepared for all the papers in this volume. (TEC).

  15. Quantitative reliability assessment for safety critical system software

    International Nuclear Information System (INIS)

    Chung, Dae Won; Kwon, Soon Man

    2005-01-01

    An essential issue in the replacement of the old analogue I and C to computer-based digital systems in nuclear power plants is the quantitative software reliability assessment. Software reliability models have been successfully applied to many industrial applications, but have the unfortunate drawback of requiring data from which one can formulate a model. Software which is developed for safety critical applications is frequently unable to produce such data for at least two reasons. First, the software is frequently one-of-a-kind, and second, it rarely fails. Safety critical software is normally expected to pass every unit test producing precious little failure data. The basic premise of the rare events approach is that well-tested software does not fail under normal routine and input signals, which means that failures must be triggered by unusual input data and computer states. The failure data found under the reasonable testing cases and testing time for these conditions should be considered for the quantitative reliability assessment. We will present the quantitative reliability assessment methodology of safety critical software for rare failure cases in this paper

  16. NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

    Science.gov (United States)

    Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

    2003-01-01

    The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

  17. Identification and assessment of organisational factors related to the safety of NPPs - State-of-the-Art Report

    International Nuclear Information System (INIS)

    Baumont, Genevieve; Bourrier, Mathilde; Frischknecht, Albert; Schoenfeld, Isabelle; Weber, Mike J.

    1999-01-01

    The initiation of this State-of-the-Art Report (SOAR) on Organisational Factors Identification and Assessment comes from operating experience associated with a number of major events world-wide which caused power plants to be shutdown for a significant period of time. Root cause assessments of these events identified weaknesses in organisational factors as contributing to these events. There is general recognition that organisational factors need to be evaluated for their contribution to plant safety performance and risk to prevent their recurrence in events. There is a need to collect and analyse operational and event data from the nuclear environment to determine the safety and risk significance of organisational factors, to identify assessment methods for those factors, and to gain peer review of the results to ensure credibility and acceptability of these methods and possibly their measures. The SOAR presents a representative view of developments in this field and addresses the following topics: - identification of organisational factors; - identification of methods for the evaluation of organisational factors; - identification of methods for the evaluation of whole organisations; - identification of gaps in knowledge and needed research to evaluate adequately the influence of organisation and management on safety and risk. The workshop participants identified 12 organisational factors as important to assess in determining organisational safety performance. They are: external influences; goals and strategies; management functions and overview; resource allocation; human resource management; training; co-ordination of work; organisational knowledge; proceduralization; organisational culture; organisational learning; and communication. Different cultural backgrounds of participants using their own terminology sometimes made it difficult to have a common definition for certain factors. Some factors could be defined by consensus; other factors such as

  18. Institutionalization of safety re-assessment system for operating nuclear power plants

    International Nuclear Information System (INIS)

    Kim, H. J.; Cho, J. C.; Min, B. K.; Park, J. S.; Jung, H. D.; Oh, K. M.; Kim, W. K.; Lim, J. H.

    1999-01-01

    In this study, in-depth reviews of the foreign countries' experiences and practices in applications of the periodic safety review (PSR), backfitting and license renewal systems as well as the current status of nuclear power safety assurance programs and activities in Korea have been performed to investigate the necessity and feasibility of the application of the systems for the domestic operating nuclear power plants and to establish effective strategy and methodology for the institutionalization of a periodic safety re-assessment system appropriate to both the domestic and international nuclear power environments by incorporating the PSR with the backfitting and license renewal systems. For these purposes, the regulatory policy, fundamental principles and detailed requirements for the institutionalization of the safety re-assessment system and the effective measures for active implementation of the backfitting program have been developed and then a comparative study of benefits and shortcomings has been conducted for the three different models of the periodic safety re-assessment system incorporated with either the license renewal or life extension process, which have been considered as practicable ones in the domestic situation. The model chosen in this study as the most appropriate safety re-assessment system is the one that the re-assessments are performed at the interval of ten years throughout the service life of nuclear power plant and the ten-year license renewal or life extension after the expiration of design life can be permitted based on the regulatory review of the re-assessment results and follow-up measures. Finally, this paper has discussed on the details of the requirements, approach and procedures established for the institutionalization of the periodic safety re-assessment system chosen as the most appropriate one for domestic applications

  19. Comparative assessment of safety indicators for vehicle trajectories on the highway

    NARCIS (Netherlands)

    Mullakkal Babu, F.A.; Wang, M.; Farah, H.; van Arem, B.; Happee, R.

    2017-01-01

    Safety measurement and analysis have been a challenging and well-researched topic in transportation. Conventionally, surrogate safety measures have been used as safety indicators in simulation models for safety assessment, in control formulations for driver assistance systems, and in data analysis

  20. Safety assessment of Novi Han radioactive waste repository - features, problems, results and perspectives

    International Nuclear Information System (INIS)

    Mateeva, M.

    2000-01-01

    This paper summarizes the work done and the achievements reached in the Novi Han radioactive waste repository safety assessment within the IAEA Model Project 'Increasing the safety of Novi Han radioactive waste repository BUL 4/005'. The overall safety assessment has a wide context, but the work reported here relates only to some details and results concerning the development and implementation of the appropriate methodology approach, model and computer code used for the calculations. Different steps and procedures are included for a better practical understanding of the obtained results during the safety assessment performance. The methodology approach is widely based on an international experience in safety analysis and implemented for evaluation computer code AMBER, which is one of the recommended from the safety assessments experts. (author)

  1. 76 FR 74723 - New Car Assessment Program (NCAP); Safety Labeling

    Science.gov (United States)

    2011-12-01

    ... [Docket No. NHTSA 2010-0025] RIN 2127-AK51 New Car Assessment Program (NCAP); Safety Labeling AGENCY... NHTSA's regulation on vehicle labeling of safety rating information to reflect the enhanced NCAP ratings... Traffic Safety Administration under the enhanced NCAP testing and rating program. * * * * * (e) * * * (4...

  2. Teen worker safety training: methods used, lessons taught, and time spent.

    Science.gov (United States)

    Zierold, Kristina M

    2015-05-01

    Safety training is strongly endorsed as one way to prevent teens from performing dangerous tasks at work. The objective of this mixed methods study was to characterize the safety training that teenagers receive on the job. From 2010 through 2012, focus groups and a cross-sectional survey were conducted with working teens. The top methods of safety training reported were safety videos (42 percent) and safety lectures (25 percent). The top lessons reported by teens were "how to do my job" and "ways to spot hazards." Males, who were more likely to do dangerous tasks, received less safety training than females. Although most teens are getting safety training, it is inadequate. Lessons addressing safety behaviors are missing, training methods used are minimal, and the time spent is insignificant. More research is needed to understand what training methods and lessons should be used, and the appropriate safety training length for effectively preventing injury in working teens. In addition, more research evaluating the impact of high-quality safety training compared to poor safety training is needed to determine the best training programs for teens. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  3. Probabilistic safety assessment of the radiotherapy treatment with a linear accelerator for medical use

    International Nuclear Information System (INIS)

    Vilaragut Llanes, Juan Jose; Ferro Fernandez, Ruben; Rodriguez MartI, Manuel; Ramirez, Maria Luisa; Perez Mulas, Arturo; Barrientos Montero, Marta; Ortiz Lopez, Pedro; Somoano, Fernando; Delgado RodrIguez, Jose Miguel; Papadopulos, Susana B.; Pereira Jr, Pedro Paulo; Lopez Morones, Ramon; Larrinaga Cortina, Eduardo; Rivero Oliva, Jose de Jesus; Alemanny, Jorge

    2010-01-01

    This paper presents the results of the Probabilistic Safety Assessment to the radiotherapy treatment with an Electron Linear Accelerator for Medical Use, which was conducted in the framework of the Iberian-American Forum of Radiological and Nuclear Regulatory Agencies. Potential accidental exposures during the treatment of patients, workers and members of the public were assessed, although the study was mainly focused on patients. The methodology of failure modes and effects analysis was used to define accident initiating events and methods of event tree and fault tree analysis to determine the accident sequences that may occur. After quantifying the frequency of occurrence of the accident sequences, an important analysis was carried out in order to determine the most significant events from the point of view of safety. The major contributors to risk were identified as well as the most appropriate safety recommendations to reduce it. (author)

  4. Health, Safety and Environmental Risk Assessment in Laboratory Sites

    Directory of Open Access Journals (Sweden)

    2012-05-01

    Full Text Available Introduction: ”Exposing to danger” or in other words, “risk” is a process which is led to an uncertain result in every field. Project risks are uncertain contingent events or situations that if they occur will have positive or negative effects on project’s objectives. Todays, research and educational process and more complicated and the professional risk management become much more difficult, as a result. .Material and Method: In this research, the health and safety issues have been studied and analyzed using ISO 14121 and the environmental issues by EMEA to determine the risk level separately for research laboratories and to prioritize corrective measure in each field (school. .Result: The finding in this study showed that from all the main risks within the rage of 38-86 percent have been decreased. Moreover average of the risk level for the health, safety and environment cases showed a significant decrease (Pvalue<0.0001 by implement controlling and protective countermeasures compariy to the priority state without any measures. . Conclusion: The risk assessment with hazards control strategy based on ISO 14121 is a compatible method in laboratory site as universities and other reasearch sites.

  5. Safety Assessment for Research Reactors and Preparation of the Safety Analysis Report. Specific Safety Guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-11-15

    . The standards are also applied by regulatory bodies and operators around the world to enhance safety in nuclear power generation and in nuclear applications in medicine, industry, agriculture and research. Safety is not an end in itself but a prerequisite for the purpose of the protection of people in all States and of the environment - now and in the future. The risks associated with ionizing radiation must be assessed and controlled without unduly limiting the contribution of nuclear energy to equitable and sustainable development. Governments, regulatory bodies and operators everywhere must ensure that nuclear material and radiation sources are used beneficially, safely and ethically. The IAEA safety standards are designed to facilitate this, and I encourage all Member States to make use of them.

  6. Safety Assessment for Research Reactors and Preparation of the Safety Analysis Report. Specific Safety Guide

    International Nuclear Information System (INIS)

    2011-01-01

    . The standards are also applied by regulatory bodies and operators around the world to enhance safety in nuclear power generation and in nuclear applications in medicine, industry, agriculture and research. Safety is not an end in itself but a prerequisite for the purpose of the protection of people in all States and of the environment - now and in the future. The risks associated with ionizing radiation must be assessed and controlled without unduly limiting the contribution of nuclear energy to equitable and sustainable development. Governments, regulatory bodies and operators everywhere must ensure that nuclear material and radiation sources are used beneficially, safely and ethically. The IAEA safety standards are designed to facilitate this, and I encourage all Member States to make use of them.

  7. Planning report for the safety assessment SR-Can

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-06-01

    This document is a planning report for SKB's next assessment of long-term safety for a KBS 3 repository. The assessment, SR-Can, is to be finished by the end of 2005 and will be used for SKB's application to build an Encapsulation plant for spent nuclear fuel. Apart from outlining the methodology, the report discusses the handling in SR-Can of a number of important issues regarding the near field, the geosphere, the biosphere, the climatic evolution etc. The Swedish nuclear safety and radiation protection authorities have recently issued regulations concerning the final disposal of nuclear waste. The principal compliance criterion states that the annual risk of harmful effects must not exceed 10{sup -6} for a representative individual in the group exposed to the greatest risk. There are also a number of requirements on methodological aspects of the safety assessment as well as on the contents of a safety report. The regulations are reproduced in an Appendix to this report. The primary safety function of the KBS 3 system is to completely isolate the spent nuclear fuel within copper canisters over the entire assessment period, which will be one million years in SR-Can. Should a canister be damaged, the secondary safety function is to retard any releases from the canisters. The main steps of the assessment are the following: 1. Qualitative system description, FEP processing: This step consists of defining a system boundary and of describing the system on a format suitable for the safety assessment. Databases of relevant features, events and processes influencing long-term safety are structured and used as one starting point for the assessment. 2. Initial state descriptions. 3. Process descriptions: In this step all identified processes within the system boundary involved in the long-term evolution of the system are described in detail. 4. Description of boundary conditions: This step is a broad description of the evolution of the boundaries of the system

  8. Guidelines for the review research reactor safety. Reference document for IAEA Integrated Safety Assessment of Research Reactors (INSARR)

    International Nuclear Information System (INIS)

    1997-01-01

    In 1992, the IAEA published new safety standards for research reactors as part of the set of publications considered by its Research Reactor Safety Programme (RRSP). This set also includes publications giving guidance for all safety aspects related to the lifetime of a research reactor. In addition, the IAEA has also revised the Safety Standards for radiation protection. Consequently, it was considered advisable to revise the Integrated Safety Assessment of Research Reactors (INSARR) procedures to incorporate the new requirements and guidance as well as to extend the scope of the safety reviews to currently operating research reactors. The present report is the result of this revision. The purpose of this report is to give guidance on the preparation, execution, reporting and follow-up of safety review mission to research reactors as conducted by the IAEA under its INSARR missions safety service. However, it will also be of assistance to operators and regulators in conducting: (a) ad hoc safety assessments of research reactors to address individual issues such as ageing or safety culture; and (b) other types of safety reviews such as internal and peer reviews and regulatory inspections

  9. Seismic assessment of a site using the time series method

    International Nuclear Information System (INIS)

    Krutzik, N.J.; Rotaru, I.; Bobei, M.; Mingiuc, C.; Serban, V.; Androne, M.

    1997-01-01

    To increase the safety of a NPP located on a seismic site, the seismic acceleration level to which the NPP should be qualified must be as representative as possible for that site, with a conservative degree of safety but not too exaggerated. The consideration of the seismic events affecting the site as independent events and the use of statistic methods to define some safety levels with very low annual occurrence probability (10 -4 ) may lead to some exaggerations of the seismic safety level. The use of some very high value for the seismic acceleration imposed by the seismic safety levels required by the hazard analysis may lead to very costly technical solutions that can make the plant operation more difficult and increase maintenance costs. The considerations of seismic events as a time series with dependence among the events produced, may lead to a more representative assessment of a NPP site seismic activity and consequently to a prognosis on the seismic level values to which the NPP would be ensured throughout its life-span. That prognosis should consider the actual seismic activity (including small earthquakes in real time) of the focuses that affect the plant site. The paper proposes the applications of Autoregressive Time Series to issue a prognosis on the seismic activity of a focus and presents the analysis on Vrancea focus that affects NPP Cernavoda site, by this method. The paper also presents the manner to analyse the focus activity as per the new approach and it assesses the maximum seismic acceleration that may affect NPP Cernavoda throughout its life-span (∼ 30 years). Development and applications of new mathematical analysis method, both for long - and short - time intervals, may lead to important contributions in the process of foretelling the seismic events in the future. (authors)

  10. Exposure data and risk indicators for safety performance assessment in Europe.

    Science.gov (United States)

    Papadimitriou, Eleonora; Yannis, George; Bijleveld, Frits; Cardoso, João L

    2013-11-01

    The objective of this paper is the analysis of the state-of-the-art in risk indicators and exposure data for safety performance assessment in Europe, in terms of data availability, collection methodologies and use. More specifically, the concepts of exposure and risk are explored, as well as the theoretical properties of various exposure measures used in road safety research (e.g. vehicle- and person-kilometres of travel, vehicle fleet, road length, driver population, time spent in traffic, etc.). Moreover, the existing methods for collecting disaggregate exposure data for risk estimates at national level are presented and assessed, including survey methods (e.g. travel surveys, traffic counts) and databases (e.g. national registers). A detailed analysis of the availability and quality of existing risk exposure data is also carried out. More specifically, the results of a questionnaire survey in the European countries are presented, with detailed information on exposure measures available, their possible disaggregations (i.e. variables and values), their conformity to standard definitions and the characteristics of their national collection methods. Finally, the potential of international risk comparisons is investigated, mainly through the International Data Files with exposure data (e.g. Eurostat, IRTAD, ECMT, UNECE, IRF, etc.). The results of this review confirm that comparing risk rates at international level may be a complex task, as the availability and quality of exposure estimates in European countries varies significantly. The lack of a common framework for the collection and exploitation of exposure data limits significantly the comparability of the national data. On the other hand, the International Data Files containing exposure data provide useful statistics and estimates in a systematic way and are currently the only sources allowing international comparisons of road safety performance under certain conditions. Copyright © 2013 Elsevier Ltd. All

  11. A New Method for the Evaluation of Vaccine Safety Based on Comprehensive Gene Expression Analysis

    Directory of Open Access Journals (Sweden)

    Haruka Momose

    2010-01-01

    Full Text Available For the past 50 years, quality control and safety tests have been used to evaluate vaccine safety. However, conventional animal safety tests need to be improved in several aspects. For example, the number of test animals used needs to be reduced and the test period shortened. It is, therefore, necessary to develop a new vaccine evaluation system. In this review, we show that gene expression patterns are well correlated to biological responses in vaccinated rats. Our findings and methods using experimental biology and genome science provide an important means of assessment for vaccine toxicity.

  12. Data report for the safety assessment SR-Site

    International Nuclear Information System (INIS)

    2010-12-01

    This report compiles, documents, and qualifies input data identified as essential for the long-term safety assessment of a KBS-3 repository, and forms an important part of the reporting of the safety assessment project SR-Site. The input data concern the repository system, broadly defined as the deposited spent nuclear fuel, the engineered barriers surrounding it, the host rock, and the biosphere in the proximity of the repository. The input data also concern external influences acting on the system, in terms of climate related data. Data are provided for a selection of relevant conditions and are qualified through traceable standardised procedures

  13. Data report for the safety assessment SR-Site

    Energy Technology Data Exchange (ETDEWEB)

    2010-12-15

    This report compiles, documents, and qualifies input data identified as essential for the long-term safety assessment of a KBS-3 repository, and forms an important part of the reporting of the safety assessment project SR-Site. The input data concern the repository system, broadly defined as the deposited spent nuclear fuel, the engineered barriers surrounding it, the host rock, and the biosphere in the proximity of the repository. The input data also concern external influences acting on the system, in terms of climate related data. Data are provided for a selection of relevant conditions and are qualified through traceable standardised procedures

  14. 78 FR 14912 - International Aviation Safety Assessment (IASA) Program Change

    Science.gov (United States)

    2013-03-08

    ... Aviation Safety Assessment (IASA) Program Change AGENCY: Federal Aviation Administration (FAA), DOT. ACTION..., into the U.S., or codeshare with a U.S. air carrier, complies with international aviation safety... subject to that country's aviation safety oversight can serve the United States using its own aircraft or...

  15. Fuel and canister process report for the safety assessment SR-Site

    International Nuclear Information System (INIS)

    Werme, Lars; Lilja, Christina

    2010-12-01

    This report documents fuel and canister processes identified as relevant to the long-term safety of a KBS-3 repository. It forms an important part of the reporting of the safety assessment SR-Site. The detailed assessment methodology, including the role of the process reports in the assessment, is described in the SR-Site Main report /SKB 2011/

  16. Fuel and canister process report for the safety assessment SR-Site

    Energy Technology Data Exchange (ETDEWEB)

    Werme, Lars; Lilja, Christina (eds.)

    2010-12-15

    This report documents fuel and canister processes identified as relevant to the long-term safety of a KBS-3 repository. It forms an important part of the reporting of the safety assessment SR-Site. The detailed assessment methodology, including the role of the process reports in the assessment, is described in the SR-Site Main report /SKB 2011/

  17. Probabilistic safety assessment in radioactive waste disposal

    International Nuclear Information System (INIS)

    Robinson, P.C.

    1987-07-01

    Probabilistic safety assessment codes are now widely used in radioactive waste disposal assessments. This report gives an overview of the current state of the field. The relationship between the codes and the regulations covering radioactive waste disposal is discussed and the characteristics of current codes is described. The problems of verification and validation are considered. (author)

  18. Assessment of Electrical Safety Beliefs and Practices: A Case Study

    Directory of Open Access Journals (Sweden)

    S. Boubaker

    2017-12-01

    Full Text Available In this paper, the electrical safety beliefs and practices in Hail region, Saudi Arabia, have been assessed. Based on legislative recommendations and rules applied in Saudi Arabia, on official statistics regarding the electricity-caused accidents and on the analysis of more than 200 photos captured in Hail (related to electrical safety, a questionnaire composed of 36 questions (10 for the respondents information, 16 for the home safety culture and 10 for the electrical devices purchasing culture has been devised and distributed to residents. 228 responses have been collected and analyzed. Using a scale similar to the one adopted for a university student GPA calculation, the electrical safety level (ESL in Hail region has been found to be 0.76 (in a scale of 4 points which is a very low score and indicates a poor electrical safety culture. Several recommendations involving different competent authorities have been proposed. Future work will concern the assessment of safety in industrial companies in Hail region.

  19. Safety assessment of emergency power systems for nuclear power plants

    International Nuclear Information System (INIS)

    1992-01-01

    This publication is intended to assist the safety assessor within a regulatory body, or one working as a consultant, in assessing the safety of a given design of the emergency power systems (EPS) for a nuclear power plant. The present publication refers closely to the NUSS Safety Guide 50-SG-D7 (Rev. 1), Emergency Power Systems at Nuclear Power Plants. It covers therefore exactly the same technical subject as that Safety Guide. In view of its objective, however, it attempts to help in the evaluation of possible technical solutions which are intended to fulfill the safety requirements. Section 2 clarifies the scope further by giving an outline of the assessment steps in the licensing process. After a general outline of the assessment process in relation to the licensing of a nuclear power plant, the publication is divided into two parts. First, all safety issues are presented in the form of questions that have to be answered in order for the assessor to be confident of a safe design. The second part presents the same topics in tabulated form, listing the required documentation which the assessor has to consult and those international and national technical standards pertinent to the topics. An extensive reference list provides information on standards. 1 tab

  20. Developing an OMERACT Core Outcome Set for Assessing Safety Components in Rheumatology Trials: The OMERACT Safety Working Group.

    Science.gov (United States)

    Klokker, Louise; Tugwell, Peter; Furst, Daniel E; Devoe, Dan; Williamson, Paula; Terwee, Caroline B; Suarez-Almazor, Maria E; Strand, Vibeke; Woodworth, Thasia; Leong, Amye L; Goel, Niti; Boers, Maarten; Brooks, Peter M; Simon, Lee S; Christensen, Robin

    2017-12-01

    Failure to report harmful outcomes in clinical research can introduce bias favoring a potentially harmful intervention. While core outcome sets (COS) are available for benefits in randomized controlled trials in many rheumatic conditions, less attention has been paid to safety in such COS. The Outcome Measures in Rheumatology (OMERACT) Filter 2.0 emphasizes the importance of measuring harms. The Safety Working Group was reestablished at the OMERACT 2016 with the objective to develop a COS for assessing safety components in trials across rheumatologic conditions. The safety issue has previously been discussed at OMERACT, but without a consistent approach to ensure harms were included in COS. Our methods include (1) identifying harmful outcomes in trials of interventions studied in patients with rheumatic diseases by a systematic literature review, (2) identifying components of safety that should be measured in such trials by use of a patient-driven approach including qualitative data collection and statistical organization of data, and (3) developing a COS through consensus processes including everyone involved. Members of OMERACT including patients, clinicians, researchers, methodologists, and industry representatives reached consensus on the need to continue the efforts on developing a COS for safety in rheumatology trials. There was a general agreement about the need to identify safety-related outcomes that are meaningful to patients, framed in terms that patients consider relevant so that they will be able to make informed decisions. The OMERACT Safety Working Group will advance the work previously done within OMERACT using a new patient-driven approach.