Safe waste management practices in beryllium facilities

International Nuclear Information System (INIS)

Bhat, P.N.; Soundararajan, S.; Sharma, D.N.

2012-01-01

Beryllium, an element with the atomic symbol Be, atomic number 4, has very high stiffness to weight ratio and low density. It has good electrical conductive properties with low coefficient of thermal expansion. These properties make the metal beryllium very useful in varied technological endeavours, However, beryllium is recognised as one of the most toxic metals. Revelation of toxic effects of beryllium resulted in institution of stringent health and safety practices in beryllium handling facilities. The waste generated in such facilities may contain traces of beryllium. Any such waste should be treated as toxic waste and suitable safe waste management practices should be adopted. By instituting appropriate waste management practice and through a meticulously incorporated safety measures and continuous surveillance exercised in such facilities, total safety can be ensured. This paper broadly discusses health hazards posed by beryllium and safe methods of management of beryllium bearing wastes. (author)

Safe practices and financial considerations in using oral chemotherapeutic agents.

Science.gov (United States)

Bartel, Sylvia B

2007-05-01

Safe handling practices and financial concerns associated with oral chemotherapy in non-traditional settings are discussed. Oral chemotherapy may pose a risk to patients because of a narrow therapeutic index, complex dosing regimen, dispensing by community pharmacists without prescription order review by an oncology pharmacist or nurse, or self-administration in the home or another nontraditional setting, where patient monitoring is infrequent. Errors in prescribing, dispensing, and administration and patient or caregiver misunderstandings are potential problems with the use of oral chemotherapy that need to be addressed when developing safe practices. Changes in Medicare pharmaceutical reimbursement rates and rules need to be monitored because they have the potential to affect patient care and outcomes. Patient assistance programs and advocacy groups can help alleviate financial concerns associated with oral chemotherapy. Consensus guidelines specific to safe handling of oral chemotherapy in the home or other nontraditional setting need to be developed. Also, healthcare providers must understand reimbursement and provide direction to patients when patient assistance programs or advocacy groups can assist with the financial challenges of oral chemotherapy.

Safe handling of plutonium: a panel report

Energy Technology Data Exchange (ETDEWEB)

1974-01-01

This guide results from a meeting of a Panel of Experts held by the International Atomic Energy Agency on 8 to 12 November 1971. It is directed to workers in research laboratories handling plutonium in gram amounts. Contents: aspects of the physical and chemical properties of plutonium; metabolic features of plutonium; facility design features for safe handling of plutonium (layout of facility, working zones, decontamination room, etc.); glove boxes; health surveillance (surveillance of environment and supervision of workers); emergencies; organization. Annexes: types of glove boxes; tables; mobile ..cap alpha.. air sampler; aerosol monitor; bio-assay limits of detection; examples of contamination control monitors.

Safe handling, transport and storage of plutonium. Proceedings of a technical committee meeting held in Vienna, 18-21 October 1993

International Nuclear Information System (INIS)

1994-10-01

Plutonium inventories and utilization rates worldwide are growing. It is important for nuclear power programmes everywhere that no incidents or accidents with plutonium occur. It is therefore important that all who deal with plutonium, do so safely. All those who deal with plutonium should have available the best information on safety handling and storage. Several countries have mature plutonium programmes. However, information exchange on plutonium has been limited. This has precluded the development until now of consensus documentation on safe handling and storage of plutonium. The Technical Committee has been established to address these problems and this Technical Document is the first product in this process. The purpose of the meeting was to bring together experts with significant experience in handling, transporting and storing plutonium; to exchange information and experiences dealing with plutonium at their facilities; to describe their practices (guidelines, procedures, regulations, etc.) for safely dealing with plutonium; to assess the need to develop and publish a consensus plutonium safety practices document(s), and to recommend possible future IAEA activities in this technical area. Refs, figs and tabs

Saving our backs: safe patient handling and mobility for home care.

Science.gov (United States)

Beauvais, Audrey; Frost, Lenore

2014-01-01

Predicted work-related injuries for nurses and home healthcare workers are on the rise given the many risk factors in the home environment and the escalating demands for home healthcare workers in the United States. Fortunately, safe patient handling and mobility programs can dramatically decrease injuries. Despite strides being made to promote safe patient handling and mobility programs in acute care, more can be done to establish such initiatives in the home care setting.

Comparison of Two Educational Methods on Nurses' Adoption of Safe Patient Handling Techniques

Science.gov (United States)

Folami, Florence

2010-01-01

Musculoskeletal injuries caused by patient lifting and transfers are a concern to health care workers. The Safe Patient Handling Act calls for all health care organizations to move to mechanical assistance from previous manual methods of transfers. This research analyzed two different educational programs that addressed safe patient handling for…

Safe Re-use Practices in Wastewater-Irrigated Urban Vegetable Farming in Ghana

DEFF Research Database (Denmark)

Keraita, Bernard; Abaidoo, R.C; Beernaerts, I.

2012-01-01

of stakeholders at different levels along the food chain. This paper presents an overview of safe re-use practices including farm-based water treatment methods, water application techniques, post-harvest handling practices, and washing methods. The overview is based on a comprehensive analysis of the literature......Irrigation using untreated wastewater poses health risks to farmers and consumers of crop products, especially vegetables. With hardly any wastewater treatment in Ghana, a multiple-barrier approach was adopted and safe re-use practices were developed through action research involving a number...... and our own specific studies, which used data from a broad range of research methods and approaches. Identifying, testing, and assessment of safe practices were done with the active participation of key actors using observations, extensive microbiological laboratory assessments, and field...

Challenges of safe medication practice in paediatric care--a nursing perspective.

Science.gov (United States)

Star, Kristina; Nordin, Karin; Pöder, Ulrika; Edwards, I Ralph

2013-05-01

To explore nurses' experiences of handling medications in paediatric clinical practice, with a focus on factors that hinder and facilitate safe medication practices. Twenty nurses (registered nurses) from four paediatric wards at two hospitals in Sweden were interviewed in focus groups. The interviews were analysed using content analysis. Six themes emerged from the analysed interviews: the complexity specific for nurses working on paediatric wards is a hindrance to safe medication practices; nurses' concerns about medication errors cause a considerable psychological burden; the individual nurse works hard for safe medication practices and values support from other nurse colleagues; circumstances out of the ordinary are perceived as critical challenges for maintaining patient safety; nurses value clear instructions, guidelines and routines, but these are often missing, variable or changeable; management, other medical professionals, the pharmacy, the pharmaceutical industry and informatics support need to respond to the requirements of the nurses' working situations to improve safe medication practices. Weaknesses were apparent in the long chain of the medication-delivery process. A joint effort by different professions involved in that delivery process, and a nationwide collaboration between hospitals is recommended to increase safe medication practices in paediatric care. ©2013 Foundation Acta Paediatrica. Published by Blackwell Publishing Ltd.

Safe handling of plutonium in research laboratories

International Nuclear Information System (INIS)

1976-01-01

The training film illustrates the main basic requirements for the safe handling of small amounts of plutonium. The film is intended not only for people setting up plutonium research laboratories but also for all those who work in existing plutonium research laboratories. It was awarded the first prize in the category ''Protection of Workers'' at the international film festival organized by the 4th World Congress of the International Radiation Protection Association (IRPA) in Paris in April 1977

Safe handling of plutonium in research laboratories

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-12-31

The training film illustrates the main basic requirements for the safe handling of small amounts of plutonium. The film is intended not only for people setting up plutonium research laboratories but also for all those who work in existing plutonium research laboratories. It was awarded the first prize in the category ``Protection of Workers`` at the international film festival organized by the 4th World Congress of the International Radiation Protection Association (IRPA) in Paris in April 1977

Principles for the Safe Moving and Handling of Patients

Directory of Open Access Journals (Sweden)

Wanless Stephen

2016-12-01

Full Text Available Human movement when walking or running is a widely researched area. However, there is an increased incidence of musculoskeletal injury from poor positioning when moving and handling patients amongst healthcare professionals and is one of the main causes of long term musculoskeletal health problems. In the clinical area, an individual’s musculoskeletal health system is subjected to mechanical loading, increasing the body’s stress and strain limits, and once these are exceeded injury occurs. The risk of pain and injury has a direct relation from the over use of poor posture from poor moving and handling, which in turn can cause loss of strength and reduce musculoskeletal function. This can be changed through healthcare workers adopting safe biomechanical body movements during patient handling tasks.

Food Safety Posters for Safe Handling of Leafy Greens

Science.gov (United States)

Rajagopal, Lakshman; Arendt, Susan W.; Shaw, Angela M.; Strohbehn, Catherine H.; Sauer, Kevin L.

2016-01-01

This article describes food safety educational tools depicting safe handling of leafy greens that are available as downloadable posters to Extension educators and practitioners (www.extension.iastate.edu). Nine visual-based minimal-text colored posters in English, Chinese, and Spanish were developed for use when formally or informally educating…

Safe Handling of Radioisotopes. 1973 Edition

International Nuclear Information System (INIS)

1973-01-01

Under its Statute the International Atomic Energy Agency is empowered to provide for the application of standards of safety for protection against radiation to its own operations and to operations making use of assistance provided by it or with which it is otherwise directly associated. To this end authorities receiving such assistance are required to observe relevant health and safety measures prescribed by the Agency. As a first step, it was considered an urgent task to provide users of radionuclides with a manual of practice for the safe handling of these substances. The first edition of such a manual was published in 1958 and represented the first of the ''Safety Series'', a series of manuals and codes on health and safety published by the Agency. It was prepared after careful consideration of existing national and international codes of radiation safety by a group of international experts and in consultation with other international bodies. This edition presents the second revision. In response to the suggestion made by some Member States, the term 'radioisotopes' has been changed to 'radionuclides' in the title and, as appropriate, in the text because the term 'radionuclides' includes the radioactive element itself as well as the isotopes. The series of manuals and codes published in the Safety Series and the Technical Reports Series give more complete advice to the user on specialized topics.

Factors influencing oncology nurses' use of hazardous drug safe-handling precautions.

Science.gov (United States)

Polovich, Martha; Clark, Patricia C

2012-05-01

To examine relationships among factors affecting nurses' use of hazardous drug (HD) safe-handling precautions, identify factors that promote or interfere with HD precaution use, and determine managers' perspectives on the use of HD safe-handling precautions. Cross-sectional, mixed methods; mailed survey to nurses who handle chemotherapy and telephone interviews with managers. Mailed invitation to oncology centers across the United States. 165 nurses who reported handling chemotherapy and 20 managers of nurses handling chemotherapy. Instruments measured the use of HD precautions and individual and organizational factors believed to influence precaution use. Data analysis included descriptive statistics and hierarchical regression. Manager interview data were analyzed using content analysis. Chemotherapy exposure knowledge, self-efficacy, perceived barriers, perceived risk, interpersonal influences, and workplace safety climate. Nurses were well educated, experienced, and certified in oncology nursing. The majority worked in outpatient settings and administered chemotherapy to an average of 6.8 patients per day. Exposure knowledge, self-efficacy for using personal protective equipment, and perceived risk of harm from HD exposure were high; total precaution use was low. Nurse characteristics did not predict HD precaution use. Fewer barriers, better workplace safety climate, and fewer patients per day were independent predictors of higher HD precaution use. HD handling policies were present, but many did not reflect current recommendations. Few managers formally monitored nurses' HD precaution use. Circumstances in the workplace interfere with nurses' use of HD precautions. Interventions should include fostering a positive workplace safety climate, reducing barriers, and providing appropriate nurse-patient ratios.

Knowledge and Food Handling Practices of Nurses in a Tertiary Health Care Hospital in Nigeria.

Science.gov (United States)

Oludare, Aluko Olufemi; Ogundipe, Abiodun; Odunjo, Abimbola; Komolafe, Janet; Olatunji, Ibukun

2016-01-01

Food safety in hospitals is important to protect patients whose immunity may be compromised by their illness. The safety of food served to patients is dependent on its handling acquisition of raw food items, to preparation, packaging, and distribution. The study described in this article assessed the knowledge and food handling practices of nurses in the food chain to patients in the hospital wards. The mean age of respondents was 33.7 ± 9.3 years and 180 (56.6%) had worked in the hospital for 1-5 years. While respondents had good knowledge scores overall, only 22 (6.5%) knew the correct temperature for maintaining hot, ready-to-eat food. Also, 332 (97.6%) respondents knew the importance of hand washing before handling food while 279 (84.1%) always wash hands before handling food. The study revealed a decline in performance over time, from knowledge and attitudes to practice in food handling. Therefore, regular training on safe food handling procedures should be mainstreamed into the training curriculum of staff nurses in health care institutions.

Explaining Consumer Safe Food Handling Through Behavior-Change Theories: A Systematic Review.

Science.gov (United States)

Young, Ian; Reimer, Danielle; Greig, Judy; Meldrum, Richard; Turgeon, Patricia; Waddell, Lisa

2017-11-01

Consumers often engage in unsafe food handling behaviors at home. Previous studies have investigated the ability of behavior-change theories to explain and predict these behaviors. The purpose of this review was to determine which theories are most consistently associated with consumers' safe food handling behaviors across the published literature. A standardized systematic review methodology was used, consisting of the following steps: comprehensive search strategy; relevance screening of identified references; confirmation of relevance and characterization of relevant articles; risk-of-bias assessment; data extraction; and descriptive analysis of study results. A total of 20 relevant studies were identified; they were mostly conducted in Australia (40%) and the United States (35%) and used a cross-sectional design (65%). Most studies targeted young adults (65%), and none focused on high-risk consumer groups. The outcomes of 70% of studies received high overall risk-of-bias ratings, largely due to a lack of control for confounding variables. The most commonly applied theory was the Theory of Planned Behavior (45% of studies), which, along with other investigated theories of behavior change, was frequently associated with consumer safe food handling behavioral intentions and behaviors. However, overall, there was wide variation in the specific constructs found to be significantly associated and in the percentage of variance explained in each outcome across studies. The results suggest that multiple theories of behavior change can help to explain consumer safe food handling behaviors and could be adopted to guide the development of future behavior-change interventions. In these contexts, theories should be appropriately selected and adapted to meet the needs of the specific target population and context of interest.

Uranium hexafluoride: A manual of good handling practices

International Nuclear Information System (INIS)

1991-10-01

For many years, the US Department of Energy (DOE) and its predecessor agencies have shared with the nuclear industry their experience in the area of uranium hexafluoride (UF 6 ) shipping containers and handling procedures. The information contained in this manual updates information contained in earlier issues. It covers the essential aspects of UF 6 handling, cylinder filling and emptying, general principles of weighing and sampling, shipping, and the use of protective overpacks. The physical and chemical properties of UF 6 are also described and tabulated. The nuclear industry is responsible for furnishing its own shipping cylinders and suitable protective overpacks. A substantial effort has been made by the industry to standardize UF 6 cylinders, samples, and overpacks. The quality of feed materials is important to the safe and efficient operation of the enriching facilities, and the UF 6 product purity from the enriching facilities is equally important to the fuel fabricator, the utilities, the operators of research reactors, and other users. The requirements have been the impetus for an aggressive effort by DOE and its contractors to develop accurate techniques for sampling and for chemical and isotopic analysis. A quality control program is maintained within the DOE enriching facilities to ensure that the proper degree of accuracy and precision are obtained for all the required measurements. The procedures and systems described for safe handling of UF 6 presented in this document have been developed and evaluated in DOE facilities during more than 40 years of handling vast quantities of UF 6 . With proper consideration for its nuclear properties, UF 6 may be safely handled in essentially the same manner as any other corrosive and/or toxic chemical

Handling radioactivity: a practical approach for scientists and engineers

International Nuclear Information System (INIS)

Stewart, D.C.

1981-01-01

The aim of this book is to present an overall view in a descriptive and essentially nonmathematical way of the practicalities of handling radioactivity. It is hoped that the material will be particularly helpful to those entering the nuclear field for the first time and to those working in related areas whose responsibilities require them to have a general knowledge of the subject of radioactivity handling and its vocabulary. The presentation is primarily for bench-scale operations. There is a considerable emphasis on facilities since these are fundamental to the safe handling of active materials. Facility design and detail is also unfortunately an area where the relevant information is largely scattered through literature sources that are not accessible to most readers. Some of the topics surveyed - such as dosimetry, shielding and nuclear criticality - are extremely complex and no pretense is made that the treatment here represents more than bare bone summaries of the fields. A considerable effort has been made to cite the key references in each area where more detailed information can be found. A few additional useful references not cited directly in the text appear in an abbreviated bibliography at the end of the book

Consumer Shell Egg Consumption and Handling Practices: Results from a National Survey.

Science.gov (United States)

Kosa, Katherine M; Cates, Sheryl C; Bradley, Samantha; Godwin, Sandria; Chambers, Delores

2015-07-01

Numerous cases and outbreaks of Salmonella infection are attributable to shell eggs each year in the United States. Safe handling and consumption of shell eggs at home can help reduce foodborne illness attributable to shell eggs. A nationally representative Web survey of 1,504 U.S. adult grocery shoppers was conducted to describe consumer handling practices and consumption of shell eggs at home. Based on self-reported survey data, most respondents purchase shell eggs from a grocery store (89.5%), and these eggs were kept refrigerated (not at room temperature; 98.5%). As recommended, most consumers stored shell eggs in the refrigerator (99%) for no more than 3 to 5 weeks (97.6%). After cracking eggs, 48.1% of respondents washed their hands with soap and water. More than half of respondents who fry and/or poach eggs cooked them so that the whites and/or the yolks were still soft or runny, a potentially unsafe practice. Among respondents who owned a food thermometer (62.0%), only 5.2% used it to check the doneness of baked egg dishes when they prepared such a dish. Consumers generally followed two of the four core "Safe Food Families" food safety messages ("separate" and "chill") when handling shell eggs at home. To prevent Salmonella infection associated with shell eggs, consumers should improve their practices related to the messages "clean" (i.e., wash hands after cracking eggs) and "cook" (i.e., cook until yolks and whites are firm and use a food thermometer to check doneness of baked egg dishes) when preparing shell eggs at home. These findings will be used to inform the development of science-based consumer education materials that can help reduce foodborne illness from Salmonella infection.

Practices of Handling

DEFF Research Database (Denmark)

Ræbild, Ulla

to touch, pick up, carry, or feel with the hands. Figuratively it is to manage, deal with, direct, train, or control. Additionally, as a noun, a handle is something by which we grasp or open up something. Lastly, handle also has a Nordic root, here meaning to trade, bargain or deal. Together all four...... meanings seem to merge in the fashion design process, thus opening up for an embodied engagement with matter that entails direction giving, organizational management and negotiation. By seeing processes of handling as a key fashion methodological practice, it is possible to divert the discourse away from...... introduces four ways whereby fashion designers apply their own bodies as tools for design; a) re-activating past garment-design experiences, b) testing present garment-design experiences c) probing for new garment-design experiences and d) design of future garment experiences by body proxy. The paper...

Uranium hexafluoride: A manual of good handling practices. Revision 7

International Nuclear Information System (INIS)

1995-01-01

The United States Enrichment Corporation (USEC) is continuing the policy of the US Department of Energy (DOE) and its predecessor agencies in sharing with the nuclear industry their experience in the area of uranium hexafluoride (UF 6 ) shipping containers and handling procedures. The USEC has reviewed Revision 6 or ORO-651 and is issuing this new edition to assure that the document includes the most recent information on UF 6 handling procedures and reflects the policies of the USEC. This manual updates the material contained in earlier issues. It covers the essential aspects of UF 6 handling, cylinder filling and emptying, general principles of weighing and sampling, shipping, and the use of protective overpacks. The physical and chemical properties of UF 6 are also described. The procedures and systems described for safe handling of UF 6 presented in this document have been developed and evaluated during more than 40 years of handling vast quantities of UF 6 . With proper consideration for its nuclear properties, UF 6 may be safely handled in essentially the same manner as any other corrosive and/or toxic chemical

Code of practice for the safe use of industrial radiography equipment (1989)

International Nuclear Information System (INIS)

1989-12-01

This code supersedes the Code of practice for the control and safe handling of sealed radioactive sources used in industrial radiography, published by the National Health and Medical Research Council (NHMRC) in 1968. It differs significantly from the former code because radiation protection practice and recommended standards have changed. The code covers the design, construction and requirements for the safe use of X-radiography equipment and gamma-radiography equipment. It provides illustrative working rules, detailed emergency procedures and comprehensive responsibilities and duties for all personnel involved in supplying and using industrial radiography equipment. The code details those equipment requirements, personnel requirements and work practices that the NHMRC considers necessary to keep exposures to ionizing radiation as low as reasonably achievable. Some equipment and facilities currently in use may not meet all of the mandatory requirements of this code. These requirements have been included in the code to encourage progress towards future compliance in the expectation that, in the interim, statutory authorities will apply them with discretion

Safe handling of cytotoxic compounds in a biopharmaceutical environment.

Science.gov (United States)

Hensgen, Miriam I; Stump, Bernhard

2013-01-01

Handling cytotoxic drugs such as antibody-drug conjugates (ADCs) in a biopharmaceutical environment represents a challenge based on the potency of the compounds. These derivatives are dangerous to humans if they accidentally get in contact with the skin, are inhaled, or are ingested, either as pure compounds in their solid state or as a solution dissolved in a co-solvent. Any contamination of people involved in the manufacturing process has to be avoided. On the other hand, biopharmaceuticals need to be protected simultaneously against any contamination from the manufacturing personnel. Therefore, a tailor-made work environment is mandatory in order to manufacture ADCs. This asks for appropriate technical equipment to keep potential hazardous substances contained. In addition, clearly defined working procedures based on risk assessments as well as proper training for all personnel involved in the manufacturing process are needed to safely handle these highly potent pharmaceuticals.

Texas passes first law for safe patient handling in America: landmark legislation protects health-care workers and patients from injury related to manual patient lifting.

Science.gov (United States)

Hudson, Mary Anne

2005-01-01

compensation costs. Because the health-care industry has relied on people to do the work of machines, nursing work remains the most dangerous occupation for disabling back injury. Back injury from patient lifting may be the single largest contributor to the nursing shortage, with perhaps 12% of nurses leaving or being terminated because of back injury. The US health-care industry has not kept pace with other industries, which provide mechanical lift equipment for lifting loads equivalent to the weight of patients, or with other countries, such as Australia and England, which are more advanced in their use of modern technology for patient lifting and with no-lifting practices in compliance with government regulations and nursing policies banning manual lifting. With Texas being the first state to succeed in passing legislation for safe patient handling, other states are working toward legislative protection against injury with manual patient lifting. California re-introduced safe patient handling legislation on February 17, 2005, with CA SB 363, Hospitals: Lift Teams, following the September 22, 2004, veto of CA AB 2532 by Governor Arnold Schwarzenegger, who said he believes existing statutory protection and workplace safety standards are sufficient to protect health care workers from injury. Massachusetts HB 2662, Relating to Safe Patient Handling in Certain Health Facilities, was introduced December 1, 2004. Ohio HB 67, signed March 21, 2005 by Governor Bob Taft (R), creates a program for interest-free loans to nursing homes for implementation of a no-manual-lift program. New York companion bills AB 7641 and SB 4029 were introduced in April, 2005, calling for creation of a 2-year study to establish safe patient handling programs and collect data on nursing staff and patient injury with manual patient handling versus lift equipment, to determine best practices for improving health and safety of health-care workers and patients during patient handling. Washington State is

Nuclear hydrogen production and its safe handling

International Nuclear Information System (INIS)

Chung, Hongsuk; Paek, Seungwoo; Kim, Kwang-Rag; Ahn, Do-Hee; Lee, Minsoo; Chang, Jong Hwa

2003-01-01

An overview of the hydrogen related research presently undertaken at the Korea Atomic Energy Research Institute are presented. These encompass nuclear hydrogen production, hydrogen storage, and the safe handling of hydrogen, High temperature gas-cooled reactors can play a significant role, with respect to large-scale hydrogen production, if used as the provider of high temperature heat in fossil fuel conversion or thermochemical cycles. A variety of potential hydrogen production methods for high temperature gas-cooled reactors were analyzed. They are steam reforming of natural gas, thermochemical cycles, etc. The produced hydrogen should be stored safely. Titanium metal was tested primarily because its hydride has very low dissociation pressures at normal storage temperatures and a high capacity for hydrogen, it is easy to prepare and is non-reactive with air in the expected storage conditions. There could be a number of potential sources of hydrogen evolution risk in a nuclear hydrogen production facility. In order to reduce the deflagration detonation it is necessary to develop hydrogen control methods that are capable of dealing with the hydrogen release rate. A series of experiments were conducted to assess the catalytic recombination characteristics of hydrogen in an air stream using palladium catalysts. (author)

Uranium hexafluoride: A manual of good handling practices. Revision 7

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-01-01

The United States Enrichment Corporation (USEC) is continuing the policy of the US Department of Energy (DOE) and its predecessor agencies in sharing with the nuclear industry their experience in the area of uranium hexafluoride (UF{sub 6}) shipping containers and handling procedures. The USEC has reviewed Revision 6 or ORO-651 and is issuing this new edition to assure that the document includes the most recent information on UF{sub 6} handling procedures and reflects the policies of the USEC. This manual updates the material contained in earlier issues. It covers the essential aspects of UF{sub 6} handling, cylinder filling and emptying, general principles of weighing and sampling, shipping, and the use of protective overpacks. The physical and chemical properties of UF{sub 6} are also described. The procedures and systems described for safe handling of UF{sub 6} presented in this document have been developed and evaluated during more than 40 years of handling vast quantities of UF{sub 6}. With proper consideration for its nuclear properties, UF{sub 6} may be safely handled in essentially the same manner as any other corrosive and/or toxic chemical.

76 FR 59661 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2011-09-27

...; Charleston, SC; and Madeira Beach, FL. The Protected Species Safe Handling, Release, and Identification....-4 p.m., Madeira Beach City Hall, 300 Municipal Drive, Madeira Beach, FL 33708. Registration To...

Safe handling of renewable fuels and fuel mixtures

Energy Technology Data Exchange (ETDEWEB)

Wilen, C; Rautalin, A [VTT Energy, Espoo (Finland)

1997-12-01

VTT Energy has for several years carried out co-operation with many European research institutes on contractional basis on safety issues of fuels handling. A two-year co-operational project between VTT Energy and these research institutes was started in EU`s JOULE 3 programme in 1996, the total budget of which is 6.9 million FIM. Dust explosion testing method for `difficult` fuels, and for tests at elevated pressures and temperatures, will be developed in the task `Safe handling of renewable fuels and fuel mixtures`. Self- ignition and dust-explosion characteristics will be generated for wood and agro-biomass based biomasses and for the mixtures of them and coal. Inertization requirements will be studied, and the quenching method, combined with partial inertization, will be tested in 1.0 m{sup 3} test equipment. The ignition properties of the fuels under normal and elevated pressures will be characterised with thermobalances. The self-ignition tests with wood and forest residue dusts at 25 bar pressure have been carried out as scheduled. In addition to this, several fuels have undergone thermobalance tests, sieve analyses and microscopic studies for the characterisation of the fuels

Code of practice for the safe use of industrial radiography equipment (1989)

International Nuclear Information System (INIS)

1989-12-01

This code supersedes the Code of Practice for the control and safe handling of sealed radioactive sources use din industrial radiography, published by the National Health and Medical Research Council (NHMRC) in 1968. It differs significantly from the former code because radiation protection practice and recommended standards have changed. The code covers the design, construction and requirements for the safe use of X-radiography equipment and gamma-radiography equipment. It provides illustrative working rules, detailed emergency procedures and comprehensive responsibilities and duties for all personnel involved in supplying and using industrial radiography equipment. The code details those equipment requirements, personnel requirements and work practices that the NHMRC considers necessary to keep exposures to ionizing radiation as low as reasonably achievable. Some equipment and facilities currently in use may not meet all of the mandatory requirements of this code. These requirements have been included in the code to encourage progress towards future compliance in the expectation that, in the interim, statutory authorities will apply them with discretion. 9 refs., tabs., ills

Safe Handling of Radioisotopes. Medical Addendum

International Nuclear Information System (INIS)

Hercik, F.; Jammet, H.

1960-01-01

The International Atomic Energy Agency published in 1958 a Manual entitled ''Safe Handling of Radioisotopes'' (Safety Series No. 1 - STI/PUB/1), based on the work of an international panel convened by the Agency. As recommended by that panel and approved by the Agency's Board of Governors, this Addendum has now been prepared, primarily as a supplement to the Manual. It contains information necessary to medical officers concerned with the implementation of the controls given in the Manual. In addition, it is intended to serve as a brief introduction to the medical problems encountered in radiological protection work and to the methods of resolving them. As in the case of the Manual itself, the information given in this Addendum is particularly relevant to the problems encountered by the small user of radioisotopes. Although the basic principles set forth in it apply to all work with radiation sources, the Addendum is not intended to serve as a radiological protection manual for use in reactor installations or large-scale nuclear industry, where more specialized techniques and information are required.

Safe handling of radioactive isotopes. Handbook 42

Energy Technology Data Exchange (ETDEWEB)

NONE

1949-09-15

With the increasing use of radioactive isotopes by industry, the medical profession, and research laboratories, it is essential that certain minimal precautions be taken to protect the users and the public. The recommendations contained in this handbook represent what is believed to be the best available opinions on the subject as of this date. As our experience with radioisotopes broadens, we will undoubtedly be able to improve and strengthen the recommendations for their safe handling and utilization. Through the courtesy of the National Research Council about a year ago, several hundred draft copies of this report were circulated to all leading workers and authorities in the field for comment and criticism. The present handbook embodies all pertinent suggestions received from these people. Further comment will be welcomed by the committee. One of the greatest difficulties encountered in the preparation of this handbook lay in the uncertainty regarding permissible radiation exposure levels - particularly for ingested radioactive materials. The establishment of sound figures for such exposure still remains a problem of high priority for many conditions and radioactive substances. Such figures as are used in this report represent the best available information today. If, in the future, these can be improved upon, appropriate corrections will be issued. The subject will be under continuous study by the two subcommittees mentioned above. The present Handbook has been prepared by the Subcommittee on the Handling of Radioactive Isotopes and Fission Products.

Safe handling of radioactive isotopes. Handbook 42

International Nuclear Information System (INIS)

1949-09-01

With the increasing use of radioactive isotopes by industry, the medical profession, and research laboratories, it is essential that certain minimal precautions be taken to protect the users and the public. The recommendations contained in this handbook represent what is believed to be the best available opinions on the subject as of this date. As our experience with radioisotopes broadens, we will undoubtedly be able to improve and strengthen the recommendations for their safe handling and utilization. Through the courtesy of the National Research Council about a year ago, several hundred draft copies of this report were circulated to all leading workers and authorities in the field for comment and criticism. The present handbook embodies all pertinent suggestions received from these people. Further comment will be welcomed by the committee. One of the greatest difficulties encountered in the preparation of this handbook lay in the uncertainty regarding permissible radiation exposure levels - particularly for ingested radioactive materials. The establishment of sound figures for such exposure still remains a problem of high priority for many conditions and radioactive substances. Such figures as are used in this report represent the best available information today. If, in the future, these can be improved upon, appropriate corrections will be issued. The subject will be under continuous study by the two subcommittees mentioned above. The present Handbook has been prepared by the Subcommittee on the Handling of Radioactive Isotopes and Fission Products

Chemotherapy drug handling in first opinion small animal veterinary practices in the United Kingdom: results of a questionnaire survey.

Science.gov (United States)

Edery, E G

2017-05-27

To investigate how first opinion small animal veterinary surgeons in the UK handled chemotherapeutic agents, a questionnaire was distributed at the 2014 British Small Animal Veterinary Association congress and by internet. Chemotherapy was regularly offered by 70.4 per cent of the respondents. Gold standards defined according to available guidelines for safe handling of antineoplastic drugs were poorly followed by general practitioners with only 2 per cent of respondents complying with all of them. Dedicated facilities for preparation and administration of cytotoxic drugs were variably available among participants. The level of training of staff indirectly involved in handling chemotherapy was appropriate in less than 50 per cent of practices. No association was found between demographic characteristics of the sampled population and the decision to perform chemotherapy. The results of this study raise concerns about the safety of the veterinary staff in first opinion practices involved in handling chemotherapy. British Veterinary Association.

75 FR 29991 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2010-05-28

... Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and Identification... (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., August, and September of 2010. Certain fishermen and shark dealers are required to attend a workshop to...

78 FR 73500 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2013-12-06

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., February, and March of 2014. Certain fishermen and shark dealers are required to attend a workshop to meet...

78 FR 54456 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2013-09-04

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., November, and December of 2013. Certain fishermen and shark dealers are required to attend a workshop to...

77 FR 32950 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2012-06-04

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., August, and September of 2012. Certain fishermen and shark dealers are required to attend a workshop to...

75 FR 10217 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2010-03-05

... Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and Identification... (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: NMFS announces free Atlantic Shark... April, May, and June of 2010. Certain fishermen and shark dealers are required to attend a workshop to...

75 FR 8304 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2010-02-24

... Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and Identification... gear, and have also been issued shark or swordfish limited access permits. Additional free workshops... Coastal Highway, Ocean City, MD 21842. Atlantic Shark Identification Workshop Since January 1, 2007, shark...

77 FR 12574 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2012-03-01

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., May, and June of 2012. Certain fishermen and shark dealers are required to attend a workshop to meet...

77 FR 55464 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2012-09-10

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., November, and December of 2012. Certain fishermen and shark dealers are required to attend a workshop to...

77 FR 73451 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2012-12-10

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., February, and March of 2013. Certain fishermen and shark dealers are required to attend a workshop to meet...

78 FR 15709 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2013-03-12

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., May, and June of 2013. Certain fishermen and shark dealers are required to attend a workshop to meet...

75 FR 74693 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2010-12-01

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., February, and March of 2011. Certain fishermen and shark dealers are required to attend a workshop to meet...

76 FR 34209 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2011-06-13

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., August, and September of 2011. Certain fishermen and shark dealers are required to attend a workshop to...

76 FR 77214 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2011-12-12

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., February, and March of 2012. Certain fishermen and shark dealers are required to attend a workshop to meet...

76 FR 11762 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2011-03-03

... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification..., May, and June of 2011. Certain fishermen and shark dealers are required to attend a workshop to meet...

Effective Teaching Practices in Handling Non Readers

Directory of Open Access Journals (Sweden)

Jacklyn S. Dacalos

2016-08-01

Full Text Available The study determined the effective teaching practices in handling nonreaders. This seeks to answer the following objectives: describe the adjustments, effective strategies, and scaffolds utilized by teachers in handling nonreaders; differentiate the teachers’ reading adjustments, strategies and scaffolds in teaching nonreaders; analyze the teaching reading efficiency of nonreaders using effective teaching reading strategies; and find significant correlation of nonreaders’ grades and reading teachers’ reading adjustments, strategies and scaffolds. This study utilized mixed methods of research. Case studies of five public schools teachers were selected as primary subjects, who were interviewed in handling nonreaders in the areas of adjustments, strategies, and reading scaffolds. Actual teaching observation was conducted according to the five subjects’ most convenient time. In ascertaining the nonreaders’ academic performance, the students’ grades in English subject was analyzed using T-Test within subject design. Handling nonreaders in order to read and understand better in the lesson is an arduous act, yet; once done with effectiveness and passion, it yielded a great amount of learning success. Effective teaching practices in handling nonreaders comprised the use of teachers’ adjustments, strategies, and scaffolds to establish reading mastery, exposing them to letter sounds, short stories, and the use of follow-up. WH questions enhanced their reading performance significantly. Variations of reading teachers’ nature as: an enabler, a facilitator, a humanist, a behaviorist, and an expert, as regards to their teaching practices, were proven significant to students’ reading effectiveness.

An exploration of undergraduate nursing and physiotherapy students' views regarding education for patient handling.

Science.gov (United States)

Kneafsey, Rosie; Ramsay, Jill; Edwards, Helen; Callaghan, Helen

2012-12-01

To ascertain the views of undergraduate student nurses and physiotherapists regarding their education in patient handling. Musculo-skeletal injuries are an important cause of staff sickness absence and attrition from the nursing profession and are a recognised problem within the physiotherapy profession. Nurses and physiotherapists are at risk of musculo-skeletal injuries as a result of their role in assisting patients with movement. A questionnaire survey was undertaken of undergraduate nursing and physiotherapy students (n = 371) at one university. Most students agreed that university teaching about moving and handling prepared them for clinical practice (64%). Over a third reported that they had never undertaken a written moving and handling risk assessment in clinical practice (38%). Almost half of the sample (40%) admitted undertaking unsafe moving and handling activities. Half (50%) also stated that they would rather 'fit' into the team than challenge unsafe practice. Almost a third (29%) stated that they had begun to experience pain since becoming a student. There were significant differences between nursing and physiotherapy students. Physiotherapy students were more likely to report being supervised when moving and handling and reported being more assertive about adhering to safe practice. The well-being of both nursing and physiotherapy undergraduate students is threatened when students undertake work placements in clinical settings. University-based education in safe patient handling, though important, can be undermined by workplace settings where unsafe practices occur. Collaboration is needed between university educators, managers and practice-based mentors to support students to maintain safe approaches to moving and handling patients. A third of students reported developing pain since becoming a healthcare student. Students entering their professions already injured may leave the workforce owing to poor physical well-being. It is vital that the

Safe Handling of Radioisotopes. Health Physics Addendum

Energy Technology Data Exchange (ETDEWEB)

Appleton, G J; Krishnamoorthy, P N

1960-07-15

The International Atomic Energy Agency published in 1958 a Manual entitled ''Safe Handling of Radioisotopes'' (Safety Series No. 1 - STI/PUB/1), based on the work of an international panel convened by the Agency. As recommended by that panel and approved by the Agency's Board of Governors, this Addendum has now been prepared, primarily as a supplement to the Manual. It contains technical information necessary for the implementation of the controls given in the Manual. In addition, it is intended to serve as a brief introduction to the technical problems encountered in radiological protection work and to the methods of resolving them. As in the case of the Manual itself, the information given in this Addendum is particularly relevant to the problems encountered by the small user of radioisotopes. Although the basic principles set forth in it apply to all work with radiation sources, the Addendum is not intended to serve as a radiological protection manual for use in reactor installations or large-scale nuclear industry, where more specialized techniques and information are required.

Safe Handling of Radioisotopes. Health Physics Addendum

International Nuclear Information System (INIS)

Appleton, G.J.; Krishnamoorthy, P.N.

1960-01-01

The International Atomic Energy Agency published in 1958 a Manual entitled ''Safe Handling of Radioisotopes'' (Safety Series No. 1 - STI/PUB/1), based on the work of an international panel convened by the Agency. As recommended by that panel and approved by the Agency's Board of Governors, this Addendum has now been prepared, primarily as a supplement to the Manual. It contains technical information necessary for the implementation of the controls given in the Manual. In addition, it is intended to serve as a brief introduction to the technical problems encountered in radiological protection work and to the methods of resolving them. As in the case of the Manual itself, the information given in this Addendum is particularly relevant to the problems encountered by the small user of radioisotopes. Although the basic principles set forth in it apply to all work with radiation sources, the Addendum is not intended to serve as a radiological protection manual for use in reactor installations or large-scale nuclear industry, where more specialized techniques and information are required.

Safe Handling of Radioisotopes. First Edition with Revised Appendix I

International Nuclear Information System (INIS)

1966-01-01

Under its Statute the International Atomic Energy Agency is empowered to provide for the application of standards of safety for protection against radiation to its own operations and to operations making use of assistance provided by it or with which it is otherwise directly associated. To this end authorities receiving such assistance are required to observe relevant health and safety measures prescribed by the Agency. As a first step, it was considered an urgent task to provide users of radioisotopes with a manual of practice for the safe handling of these substances. The first edition of such a manual was published in 1958 and represented the first of the 'Safety Series', a series of manuals and codes on health and safety published by the Agency. It was prepared after careful consideration of existing national and international codes of radiation safety by a group of international experts and in consultation with other international bodies. This edition presents the first revision. It incorporates in the Appendices the latest recommendations of the International Commission on Radiological Protection and extracts from the report of the Committee II of the I.C.R.P. on permissible dose for internal radiation. The Health Physics and Medical Addenda to this Manual, published as No. 2 and No. 3 in the Safety Series in 1960, give more complete advice to the user on specialized topics.

System design for safe robotic handling of nuclear materials

International Nuclear Information System (INIS)

Drotning, W.; Wapman, W.; Fahrenholtz, J.; Kimberly, H.; Kuhlmann, J.

1996-01-01

Robotic systems are being developed by the Intelligent Systems and Robotics Center at Sandia National Laboratories to perform automated handling tasks with radioactive nuclear materials. These systems will reduce the occupational radiation exposure to workers by automating operations which are currently performed manually. Because the robotic systems will handle material that is both hazardous and valuable, the safety of the operations is of utmost importance; assurance must be given that personnel will not be harmed and that the materials and environment will be protected. These safety requirements are met by designing safety features into the system using a layered approach. Several levels of mechanical, electrical and software safety prevent unsafe conditions from generating a hazard, and bring the system to a safe state should an unexpected situation arise. The system safety features include the use of industrial robot standards, commercial robot systems, commercial and custom tooling, mechanical safety interlocks, advanced sensor systems, control and configuration checks, and redundant control schemes. The effectiveness of the safety features in satisfying the safety requirements is verified using a Failure Modes and Effects Analysis. This technique can point out areas of weakness in the safety design as well as areas where unnecessary redundancy may reduce the system reliability

75 FR 53665 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Science.gov (United States)

2010-09-01

..., FL; Madeira Beach, FL; and Charleston, SC. The Protected Species Safe Handling, Release, and... Community Center, 504 Big Tree Road, South Daytona, FL 32119. 3. November 3, 2010, 12 p.m. - 4 p.m., Madeira Beach Town Hall, 300 Municipal Drive, Madeira Beach, FL 33708. 4. December 2, 2010, 12 p.m. - 4 p.m...

Safe injection procedures, injection practices, and needlestick ...

African Journals Online (AJOL)

Results: Safe injection procedures regarding final waste disposal were sufficiently adopted, while measures regarding disposable injection equipment, waste containers, hand hygiene, as well as injection practices were inadequately carried out. Lack of job aid posters that promote safe injection and safe disposal of ...

Safe injection practice among health care workers, Gharbiya, Egypt.

Science.gov (United States)

Ismail, Nanees A; Aboul Ftouh, Aisha M; El Shoubary, Waleed H

2005-01-01

A cross-sectional study was conducted in 25 health care facilities in Gharbiya governorate to assess safe injection practices among health care workers (HCWs). Two questionnaires, one to collect information about administrative issues related to safe injection and the other to collect data about giving injections, exposure to needle stick injuries, hepatitis B vaccination status and safe injection training. Practices of injections were observed using a standardized checklist. The study revealed that there was lack of both national and local infection control policies and lack of most of the supplies needed for safe injection practices. Many safe practices were infrequent as proper needle manipulation before disposal (41%), safe needle disposal (47.5%), reuse of used syringe & needle (13.2%) and safe syringe disposal (0%). Exposure to needle stick injuries were common among the interviewed HCWs (66.2%) and hand washing was the common post exposure prophylaxis measure (63.4%). Only 11.3% of HCWs had full course hepatitis B vaccination. Infection control -including safe injections- training programs should be afforded to all HCWs.

Differences among nursing homes in outcomes of a safe resident handling program.

Science.gov (United States)

Kurowski, Alicia; Gore, Rebecca; Buchholz, Bryan; Punnett, Laura

2012-01-01

A large nursing home corporation implemented a safe resident handling program (SRHP) in 2004-2007. We evaluated its efficacy over a 2-year period by examining differences among 5 centers in program outcomes and potential predictors of those differences. We observed nursing assistants (NAs), recording activities and body postures at 60-second intervals on personal digital assistants at baseline and at 3-month, 12-month, and 24-month follow-ups. The two outcomes computed were change in equipment use during resident handling and change in a physical workload index that estimated spinal loading due to body postures and handled loads. Potential explanatory factors were extracted from post-observation interviews, investigator surveys of the workforce, from administrative data, and employee satisfaction surveys. The facility with the most positive outcome measures was associated with many positive changes in explanatory factors and the facility with the fewest positive outcome measures experienced negative changes in the same factors. These findings suggest greater SRHP benefits where there was lower NA turnover and agency staffing; less time pressure; and better teamwork, staff communication, and supervisory support. © 2012 American Society for Healthcare Risk Management of the American Hospital Association.

Survey of tritiated oil sources and handling practices

International Nuclear Information System (INIS)

Miller, J.M.

1994-08-01

Tritium interactions with oil sources (primarily associated with pumps) in tritium-handling facilities can lead to the incorporation of tritium in the oil and the production of tritiated hydrocarbons. This results in a source of radiological hazard and the need for special handling considerations during maintenance, decontamination, decommissioning and waste packaging and storage. The results of a general survey of tritiated-oil sources and their associated characteristics, handling practices, analysis techniques and waste treatment/storage methods are summarized here. Information was obtained from various tritium-handling laboratories, fusion devices, and CANDU plants. 38 refs., 1 fig

Strategies and challenges for safe injection practice in developing countries.

Science.gov (United States)

Gyawali, Sudesh; Rathore, Devendra Singh; Shankar, P Ravi; Kumar, Kc Vikash

2013-01-01

Injection is one of the important health care procedures used globally to administer drugs. Its unsafe use can transmit various blood borne pathogens. This article aims to review the history and status of injection practices, its importance, interventions and the challenges for safe injection practice in developing countries. The history of injections started with the discovery of syringe in the early nineteenth century. Safe injection practice in developed countries was initiated in the early twentieth century but has not received adequate attention in developing countries. The establishment of "Safe Injection Global Network (SIGN)" was an milestone towards safe injection practice globally. In developing countries, people perceive injection as a powerful healing tool and do not hesitate to pay more for injections. Unsafe disposal and reuse of contaminated syringe is common. Ensuring safe injection practice is one of the greatest challenges for healthcare system in developing countries. To address the problem, interventions with active involvement of a number of stakeholders is essential. A combination of educational, managerial and regulatory strategies is found to be effective and economically viable. Rational and safe use of injections can save many lives but unsafe practice threatens life. Safe injection practice is crucial in developing countries. Evidence based interventions, with honest commitment and participation from the service provider, recipient and community with aid of policy makers are required to ensure safe injection practice.

Safe Handling and Use of Flammable and Combustible Materials. Module SH-30. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safe handling and use of flammable and combustible materials is one of 50 modules concerned with job safety and health. This module introduces the student to the hazards of flammable and combustible materials and the measures necessary to control those hazards. Following the introduction, 14 objectives (each keyed to a page…

Laboratory biosafety for handling emerging viruses

Directory of Open Access Journals (Sweden)

I. Made Artika

2017-05-01

Full Text Available Emerging viruses are viruses whose occurrence has risen within the past twenty years, or whose presence is likely to increase in the near future. Diseases caused by emerging viruses are a major threat to global public health. In spite of greater awareness of safety and containment procedures, the handling of pathogenic viruses remains a likely source of infection, and mortality, among laboratory workers. There is a steady increase in both the number of laboratories and scientist handling emerging viruses for diagnostics and research. The potential for harm associated to work with these infectious agents can be minimized through the application of sound biosafety concepts and practices. The main factors to the prevention of laboratory-acquired infection are well-trained personnel who are knowledgable and biohazard aware, who are perceptive of the various ways of transmission, and who are professional in safe laboratory practice management. In addition, we should emphasize that appropriate facilities, practices and procedures are to be used by the laboratory workers for the handling of emerging viruses in a safe and secure manner. This review is aimed at providing researchers and laboratory personnel with basic biosafety principles to protect themselves from exposure to emerging viruses while working in the laboratory. This paper focuses on what emerging viruses are, why emerging viruses can cause laboratory-acquired infection, how to assess the risk of working with emerging viruses, and how laboratory-acquired infection can be prevented. Control measures used in the laboratory designed as such that they protect workers from emerging viruses and safeguard the public through the safe disposal of infectious wastes are also addressed.

Examining the predictive utility of an extended theory of planned behaviour model in the context of specific individual safe food-handling.

Science.gov (United States)

Mullan, Barbara; Allom, Vanessa; Sainsbury, Kirby; Monds, Lauren A

2015-07-01

In order to minimise the occurrence of food-borne illness, it is recommended that individuals perform safe food-handling behaviours, such as cooking food properly, cleaning hands and surfaces before preparing food, keeping food at the correct temperature, and avoiding unsafe foods. Previous research examining the determinants of safe food-handling behaviour has produced mixed results; however, this may be due to the fact that this research examined these behaviours as a totality, rather than considering the determinants of each behaviour separately. As such, the objective for the present study was to examine the predictors of the four aforementioned safe food-handling behaviours by applying an extended theory of planned behaviour to the prediction of each distinct behaviour. Participants were 170 students who completed theory of planned behaviour measures, with the addition of moral norm and habit strength at time 1, and behaviour measures one week later. While the influence of injunctive and descriptive norm and perceived behavioural control differed between behaviours, it appeared that moral norm was an important predictor of intention to engage in each of the four behaviours. Similarly, habit strength was an important predictor of each of the behaviours and moderated the relationship between intention and behaviour for the behaviour of avoiding unsafe food. The implication of these findings is that examining safe food-handling behaviours separately, rather than as a totality, may result in meaningful distinctions between the predictors of these behaviours. Copyright © 2015 Elsevier Ltd. All rights reserved.

METHODS FOR THE SAFE STORAGE, HANDLING, AND DISPOSAL OF PYROPHORIC LIQUIDS AND SOLIDS IN THE LABORATORY

Energy Technology Data Exchange (ETDEWEB)

Simmons, F.; Kuntamukkula, M.; Alnajjar, M.; Quigley, D.; Freshwater, D.; Bigger, S.

2010-02-02

Pyrophoric reagents represent an important class of reactants because they can participate in many different types of reactions. They are very useful in organic synthesis and in industrial applications. The Occupational Safety and Health Administration (OSHA) and the National Fire Protection Association (NFPA) define Pyrophorics as substances that will self-ignite in air at temperatures of 130 F (54.4 C) or less. However, the U.S. Department of Transportation (DOT) uses criteria different from the auto-ignition temperature criterion. The DOT defines a pyrophoric material as a liquid or solid that, even in small quantities and without an external ignition source, can ignite within five minutes after coming in contact with air when tested according to the United Nations Manual of Tests and Criteria. The Environmental Protection Agency has adopted the DOT definition. Regardless of which definition is used, oxidation of the pyrophoric reagents by oxygen or exothermic reactions with moisture in the air (resulting in the generation of a flammable gas such as hydrogen) is so rapid that ignition occurs spontaneously. Due to the inherent nature of pyrophoric substances to ignite spontaneously upon exposure to air, special precautions must be taken to ensure their safe handling and use. Pyrophoric gases (such as diborane, dichloroborane, phosphine, etc.) are typically the easiest class of pyrophoric substances to handle since the gas can be plumbed directly to the application and used remotely. Pyrophoric solids and liquids, however, require the user to physically manipulate them when transferring them from one container to another. Failure to follow proper safety precautions could result in serious injury or unintended consequences to laboratory personnel. Because of this danger, pyrophorics should be handled only by experienced personnel. Users with limited experience must be trained on how to handle pyrophoric reagents and consult with a knowledgeable staff member prior

Compilation of Requirements for Safe Handling of Fluorine and Fluorine-Containing Products of Uranium Hexafluoride Conversion

International Nuclear Information System (INIS)

Ferrada, J.J.; Hightower, J.R.; Begovich, J.M.

2000-01-01

Public Law (PL) 105--204 requires the U.S. Department of Energy to develop a plan for inclusion in the fiscal year 2000 budget for conversion of the Department's stockpile of depleted uranium hexafluoride (DUF6) to a more stable form over an extended period. The conversion process into a more stable form will produce fluorine compounds (e.g., elemental fluorine or hydrofluoric acid) that need to be handled safely. This document compiles the requirements necessary to handle these materials within health and safety standards, which may apply in order to ensure protection of the environment and the safety and health of workers and the public

Safer handling practice: influence of staff education on older people.

Science.gov (United States)

Wilson, Christine Brown

The purpose of this small-scale survey was to explore the level of moving and handling training undertaken by nurses within private sector continuing care environments and the potential this training had to influence the care of older people. This study uses a definition of safer handling practice derived from existing literature to examine how nurses report the application of this training and whether they observe changes to the mobility of older people within their care. The limitations of this study indicate that generalizations must be made cautiously. However, this study tentatively suggests that potential exists to influence positively the use of safer handling practice as defined within this study. Recommendations for further study are made.

Safe delivery practices: experience from cross-sectional data of Bangladeshi women.

Science.gov (United States)

Kabir, M A; Goh, Kim-Leng; Khan, M M H; Al-Amin, Abul Quasem; Azam, Mohammad Nurul

2015-03-01

This study examines the safe delivery practices of Bangladeshi women using data on 4905 ever-married women aged 15 to 49 years from the 2007 Bangladesh Demographic and Health Survey. Variables that included age, region of origin, education level of respondent and spouse, residence, working status, religion, involvement in NGOs, mass media exposure, and wealth index were analyzed to find correlates of safe delivery practices. More than 80% of the deliveries took place at home, and only 18% were under safe and hygienic conditions. The likelihood of safe deliveries was significantly lower among younger and older mothers than middle-aged mothers and higher among educated mothers and those living in urban areas. Economically better-off mothers and those with greater exposure to mass media had a significantly higher incidence of safe delivery practices. A significant association with religion and safe delivery practices was revealed. Demographic, socioeconomic, cultural, and programmatic factors that are strongly associated with safe delivery practices should be considered in the formulation of reproductive health policy. © 2012 APJPH.

Oxygen Handling and Cooling Options in High Temperature Electrolysis Plants

Energy Technology Data Exchange (ETDEWEB)

Manohar S. Sohal; J. Stephen Herring

2008-07-01

Idaho National Laboratory is working on a project to generate hydrogen by high temperature electrolysis (HTE). In such an HTE system, safety precautions need to be taken to handle high temperature oxygen at ~830°C. This report is aimed at addressing oxygen handling in a HTE plant.. Though oxygen itself is not flammable, most engineering material, including many gases and liquids, will burn in the presence of oxygen under some favorable physicochemical conditions. At present, an absolute set of rules does not exist that can cover all aspects of oxygen system design, material selection, and operating practices to avoid subtle hazards related to oxygen. Because most materials, including metals, will burn in an oxygen-enriched environment, hazards are always present when using oxygen. Most materials will ignite in an oxygen-enriched environment at a temperature lower than that in air, and once ignited, combustion rates are greater in the oxygen-enriched environment. Even many metals, if ignited, burn violently in an oxygen-enriched environment. However, these hazards do not preclude the operations and systems involving oxygen. Oxygen can be safely handled and used if all the materials in a system are not flammable in the end-use environment or if ignition sources are identified and controlled. In fact, the incidence of oxygen system fires is reported to be low with a probability of about one in a million. This report is a practical guideline and tutorial for the safe operation and handling of gaseous oxygen in high temperature electrolysis system. The intent is to provide safe, practical guidance that permits the accomplishment of experimental operations at INL, while being restrictive enough to prevent personnel endangerment and to provide reasonable facility protection. Adequate guidelines are provided to govern various aspects of oxygen handling associated with high temperature electrolysis system to generate hydrogen. The intent here is to present acceptable

Guidelines for safe handling of hazardous drugs: A systematic review.

Science.gov (United States)

Bernabeu-Martínez, Mari A; Ramos Merino, Mateo; Santos Gago, Juan M; Álvarez Sabucedo, Luis M; Wanden-Berghe, Carmina; Sanz-Valero, Javier

2018-01-01

To review the scientific literature related to the safe handling of hazardous drugs (HDs). Critical analysis of works retrieved from MEDLINE, the Cochrane Library, Scopus, CINHAL, Web of Science and LILACS using the terms "Hazardous Substances", "Antineoplastic Agents" and "Cytostatic Agents", applying "Humans" and "Guidelines" as filters. Date of search: January 2017. In total, 1100 references were retrieved, and from those, 61 documents were selected based on the inclusion and exclusion criteria: 24 (39.3%) documents related to recommendations about HDs; 27 (44.3%) about antineoplastic agents, and 10 (33.3%) about other types of substances (monoclonal antibodies, gene medicine and other chemical and biological agents). In 14 (23.3%) guides, all the stages in the manipulation process involving a risk due to exposure were considered. Only one guide addressed all stages of the handling process of HDs (including stages with and without the risk of exposure). The most described stages were drug preparation (41 guides, 67.2%), staff training and/or patient education (38 guides, 62.3%), and administration (37 guides, 60.7%). No standardized informatics system was found that ensured quality management, traceability and minimization of the risks associated with these drugs. Most of the analysed guidelines limit their recommendations to the manipulation of antineoplastics. The most frequently described activities were preparation, training, and administration. It would be convenient to apply ICTs (Information and Communications Technologies) to manage processes involving HDs in a more complete and simpler fashion.

9 CFR 381.125 - Special handling label requirements.

Science.gov (United States)

2010-01-01

... AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY.... The safe handling information shall be set off by a border and shall be one color type printed on a single color contrasting background whenever practical. (2) (i) The labels of the poultry products...

A physical workload index to evaluate a safe resident handling program for nursing home personnel.

Science.gov (United States)

Kurowski, Alicia; Buchholz, Bryan; Punnett, Laura

2014-06-01

The aim of this study was to obtain a comprehensive analysis of the physical workload of clinical staff in long-term care facilities, before and after a safe resident handling program (SRHP). Ergonomic exposures of health care workers include manual handling of patients and many non-neutral postures. A comprehensive assessment requires the integration of loads from these varied exposures into a single metric. The Postures, Activities, Tools, and Handling observational protocol, customized for health care, was used for direct observations of ergonomic exposures in clinical jobs at 12 nursing homes before the SRHP and 3, 12, 24, and 36 months afterward. Average compressive forces on the spine were estimated for observed combinations of body postures and manual handling and then weighted by frequencies of observed time for the combination. These values were summed to obtain a biomechanical index for nursing assistants and nurses across observation periods. The physical workload index (PWI) was much higher for nursing assistants than for nurses and decreased more after 3 years (-24% versus -2.5%). Specifically during resident handling, the PWI for nursing assistants decreased by 41% of baseline value. Spinal loading was higher for nursing assistants than for nurses in long-term care centers. Both job groups experienced reductions in physical loading from the SRHP, especially the nursing assistants and especially while resident handling. The PWI facilitates a comprehensive investigation of physical loading from both manual handling and non-neutral postures. It can be used in any work setting to identify high-risk tasks and determine whether reductions in one exposure are offset by increases in another.

Milk postharvest handling practices across the supply chain in Eastern Ethiopia

Directory of Open Access Journals (Sweden)

Tadele Amentie

2016-06-01

Full Text Available Objective: This study was conducted to assess hygienic cow milk handling practices of milk producers, traders (informal collectors, transporters and vendors and consumers across the milk supply chain in the Eastern Ethiopia. Materials and methods: A total of 160 milk producers in Babile district were selected using multistage stratified sampling technique. Moreover, a total of 54 milk collectors and transporters (5, 40, 9 from Jigjiga, Harar and Dire Dawa town, respectively, 152 vendors (40 from Bable, Harar and Dire Dawa town and 32 from Jigjiga town and 160 consumers (40 from each town were selected using snowball sampling technique. Data from the selected actors were collected using focus group discussion, questionnaire survey and observations. Results: The study revealed that the majority of milk handling operations in the study area is carried out by females. The majority of respondent milk producers (87.5-92.5%, collectors and transporters (88.9-100%, vendors (77.5-90.7% and some consumers (37.5-47.5% performing milk handling operations were illiterate. Most of the observed actors in the study area perform malpractices (such as failure to stop milk handling while showing disease symptoms, improper hand washing and handling of risk factors while working with milk. Majority of respondent milk producers (87.5-97.5%, all traders and some consumers (12.5-32.5% use plastic containers for milk handling. Milk handling equipments were commonly washed using warm water, detergent and sand; however, in most case they were not properly protected from risk factors after washing. Majority of respondent milk producers (55-65%, collectors and transporters (60-66.7%, and some vendors (0-50% and consumers (0-55% use water from non-tap sources for hygienic practices. Conclusion: In general; the findings indicated that milk handling practices performed across the supply chain in the study area were unhygienic and therefore suggested the need for improving

Factors affecting vaccine handling and storage practices among ...

African Journals Online (AJOL)

Objective: Assessing the factors associated with vaccine handling and storage practices. Methods: This was a .... Others include insufficient/unavailable backup refrigerators (52%) .... Human Vaccines 2010; 6(3): 270-278. 5. Joao Carlos de ...

Microbiological quality and safe handling of enteral diets in a hospital in Minas Gerais, Brazil.

Science.gov (United States)

Pinto, Raquel Oliveira Medrado; Correia, Eliznara Fernades; Pereira, Keyla Carvalho; Costa Sobrinho, Paulo de Souza; da Silva, Daniele Ferreira

2015-06-01

Contamination of enteral diets represents a high risk of compromising the patient's medical condition. To assess the microbiological quality and aseptic conditions in the preparation and administration of handmade and industrialized enteral diets offered in a hospital in the Valley of Jequitinhonha, MG, Brazil, we performed a microbiological analysis of 50 samples of diets and 27 samples of surfaces, utensils, and water used in the preparation of the diets. In addition, we assessed the good handling practices of enteral diets according to the requirements specified by the Brazilian legislation. Both kinds of enteral diets showed contamination by coliforms and Pseudomonas spp. No sample was positive for Staphylococcus aureus and Salmonella spp. On the other hand, Listeria spp. was detected in only one sample of handmade diets. Contamination was significantly higher in the handmade preparations (p Nonconformities were detected with respect to good handling practices, which may compromise the diet safety. The results indicate that the sanitary quality of the enteral diets is unsatisfactory, especially handmade diets. Contamination by Pseudomonas spp. is significant because it is often involved in infection episodes. With regard to aseptic practices, it was observed the need of implementing new procedures for handling enteral diets.

Guidelines for safe handling, use and disposal of nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Amoabediny, G H; Rashedi, H [Department of Biotechnology, Faculty of Chemical Engineering, University of Tehran (Iran, Islamic Republic of)], E-mail: amoabedini@ut.ac.ir; Naderi, A [Department of Occupational Health, Faculty of Medical Science, University of Tarbiat Modares (Iran, Islamic Republic of); Malakootikhah, J [Nanotechnology Standardisation Committee, Iran Nanotechnology Initiative, Tehran (Iran, Islamic Republic of); Koohi, M K [Faculty of veterinary medicine, University of Tehran (Iran, Islamic Republic of); Mortazavi, S A [Department of Nanosafety, Research Centre for New Technology in life science Engineering, University of Tehran (Iran, Islamic Republic of); Naderi, M [University of Amirkabir (Iran, Islamic Republic of)

2009-05-01

situations, performing administrative means of control constitute other ways of limiaiting the occupational exposure risks. Accordingly, to minimize the risks from know and unknown health, safety and invironment hazards in research and occupational setting of the country, guideline for safe handling, use and disposal of manopractical has provided.

Guidelines for safe handling, use and disposal of nanoparticles

International Nuclear Information System (INIS)

Amoabediny, G H; Rashedi, H; Naderi, A; Malakootikhah, J; Koohi, M K; Mortazavi, S A; Naderi, M

2009-01-01

situations, performing administrative means of control constitute other ways of limiaiting the occupational exposure risks. Accordingly, to minimize the risks from know and unknown health, safety and invironment hazards in research and occupational setting of the country, guideline for safe handling, use and disposal of manopractical has provided.

DOE handbook: Tritium handling and safe storage

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The DOE Handbook was developed as an educational supplement and reference for operations and maintenance personnel. Most of the tritium publications are written from a radiological protection perspective. This handbook provides more extensive guidance and advice on the null range of tritium operations. This handbook can be used by personnel involved in the full range of tritium handling from receipt to ultimate disposal. Compliance issues are addressed at each stage of handling. This handbook can also be used as a reference for those individuals involved in real time determination of bounding doses resulting from inadvertent tritium releases. This handbook provides useful information for establishing processes and procedures for the receipt, storage, assay, handling, packaging, and shipping of tritium and tritiated wastes. It includes discussions and advice on compliance-based issues and adds insight to those areas that currently possess unclear DOE guidance.

DOE handbook: Tritium handling and safe storage

International Nuclear Information System (INIS)

1999-03-01

The DOE Handbook was developed as an educational supplement and reference for operations and maintenance personnel. Most of the tritium publications are written from a radiological protection perspective. This handbook provides more extensive guidance and advice on the null range of tritium operations. This handbook can be used by personnel involved in the full range of tritium handling from receipt to ultimate disposal. Compliance issues are addressed at each stage of handling. This handbook can also be used as a reference for those individuals involved in real time determination of bounding doses resulting from inadvertent tritium releases. This handbook provides useful information for establishing processes and procedures for the receipt, storage, assay, handling, packaging, and shipping of tritium and tritiated wastes. It includes discussions and advice on compliance-based issues and adds insight to those areas that currently possess unclear DOE guidance

Public health implications of post-harvest fish handling practices in ...

African Journals Online (AJOL)

A wide range of handling practices for harvested fish exists and they have economic as well as public health implications. This paper is a review of the existing problems in fish handling technologies at post-harvest in Nigeria. The public health aspects with the associated implications are highlighted. Status of policy on fish ...

Microbiological quality and safe handling of enteral diets in a hospital in Minas Gerais, Brazil

Directory of Open Access Journals (Sweden)

Raquel Oliveira Medrado Pinto

2015-06-01

Full Text Available Contamination of enteral diets represents a high risk of compromising the patient's medical condition. To assess the microbiological quality and aseptic conditions in the preparation and administration of handmade and industrialized enteral diets offered in a hospital in the Valley of Jequitinhonha, MG, Brazil, we performed a microbiological analysis of 50 samples of diets and 27 samples of surfaces, utensils, and water used in the preparation of the diets. In addition, we assessed the good handling practices of enteral diets according to the requirements specified by the Brazilian legislation. Both kinds of enteral diets showed contamination by coliforms and Pseudomonas spp. No sample was positive for Staphylococcus aureus and Salmonella spp. On the other hand, Listeria spp. was detected in only one sample of handmade diets. Contamination was significantly higher in the handmade preparations (p < 0.05. Nonconformities were detected with respect to good handling practices, which may compromise the diet safety. The results indicate that the sanitary quality of the enteral diets is unsatisfactory, especially handmade diets. Contamination by Pseudomonas spp. is significant because it is often involved in infection episodes. With regard to aseptic practices, it was observed the need of implementing new procedures for handling enteral diets.

Strategies and challenges for safe injection practice in developing countries

OpenAIRE

Gyawali, Sudesh; Rathore, Devendra Singh; Shankar, P Ravi; Kumar, KC Vikash

2013-01-01

Injection is one of the important health care procedures used globally to administer drugs. Its unsafe use can transmit various blood borne pathogens. This article aims to review the history and status of injection practices, its importance, interventions and the challenges for safe injection practice in developing countries. The history of injections started with the discovery of syringe in the early nineteenth century. Safe injection practice in developed countries was initiated in the earl...

The role of safe practices in hospitals’ total factor productivity

Directory of Open Access Journals (Sweden)

Timothy R Huerta

2011-01-01

Full Text Available Timothy R Huerta1, Mark A Thompson2, Eric W Ford31Center for Health Innovation, Education, and Research, 2Rawls College of Business, Texas Tech University, Lubbock, TX, USA; 3Forsyth Medical Center Distinguished Professor of Health Care, The University of North Carolina Greensboro, Greensboro, NC, USAAbstract: The dual aims of improving safety and productivity are a major part of the health care reform movement hospital leaders must manage. Studies exploring the two phenomena conjointly and over time are critical to understanding how change in one dimension influences the other over time. A Malmquist approach is used to assess hospitals’ relative productivity levels over time. Analysis of variance (ANOVA algorithms were executed to assess whether or not the Malmquist Indices (MIs correlate with the safe practices measure. The American Hospital Association’s annual survey and the Centers for Medicare and Medicaid Services’ Case Mix Index for fiscal years 2002–2006, along with Leapfrog Group’s annual survey for 2006 were used for this study. Leapfrog Group respondents have significantly higher technological change (TC and total factor productivity (TFP than nonrespondents without sacrificing technical efficiency changes. Of the three MIs, TC (P < 0.10 and TFP (P < 0.05 had significant relationships with the National Quality Forum’s Safe Practices score. The ANOVA also indicates that the mean differences of TFP measures progressed in a monotonic fashion up the Safe Practices scale. Adherence to the National Quality Forum’s Safe Practices recommendations had a major impact on hospitals’ operating processes and productivity. Specifically, there is evidence that hospitals reporting higher Safe Practices scores had above average levels of TC and TFP gains over the period assessed. Leaders should strive for increased transparency to promote both quality improvement and increased productivity.Keywords: safety, productivity, quality, safe

Iatrogenic Hepatitis C Virus Transmission and Safe Injection Practices.

Science.gov (United States)

Defendorf, Charles M; Paul, Sindy; Scott, George J

2018-05-01

Hepatitis C virus (HCV) infection poses significant adverse health effects. Improper use of vials, needles, syringes, intravenous bags, tubing, and connectors for injections and infusions is a current preventable cause of iatrogenic HCV transmission. Numerous cases have demonstrated the need for continued vigilance and the widespread nature of this iatrogenic infection risk across a variety of medical practice settings in the United States. Failure to implement the evidence-based Centers for Disease Control and Prevention (CDC) infection prevention guidelines exposes patients to preventable harm. The guidelines establish the requirement to notify patients in cases of suspected virus transmission, as well as to screen those patients who would not otherwise have been at risk for HCV seroconversion and other bloodborne pathogens. Legal and regulatory ramifications, including state, criminal, and tort laws, hold physicians and other health care professionals accountable to use safe injection practices. This article reviews the major health risks of HCV infection, significant effects of iatrogenic infection transmission, CDC guidelines for safe injection practices, and legal regulations and ramifications designed to promote safe injection practices.

Influence of Handling Practices on Material Recovery from Residential Solid Waste

Directory of Open Access Journals (Sweden)

Jairo F. Pereira

2010-07-01

Full Text Available Material recovery from municipal solid waste (MSW is becoming widely adopted in several developing countries. Residential solid waste is one of the most important components of MSW and the handling practices of the MSW by the generators have a major impact on the quality and quantity of the materials for recovery. This article analyzes the generation and composition of residential solid waste and the handling practices by users in three municipalities in Colombia that have a solid waste management plant (SWMP. The findings show that, although there are significant amounts of useful materials, their handling of the materials as “garbage”, the low recognition of recovery work, and the inadequate storage and source management practices, affect material recovery and the operation of SWMPs. These results may be taken as a reference for this type of municipality, because the solid waste management system and the type of operation of the SWMPs analyzed is similar to all of the SWMPs in the country as well as in other countries in the region.

Sheep pre-slaughter handling practices and their effect on meat quality

Directory of Open Access Journals (Sweden)

Francisco Gerardo Ríos-Rincón

2013-06-01

Full Text Available Aspects related to ovine production systems in Mexico were revisited, as well as the relationship between the transport and the ante-mortem handling with ovine welfare and pre slaughter operations. Animals stress evaluation is fundamental importance for this process, where the observation of animal behavior is basic to determinate and understands the scope of this biological phenomenon. Finally, we make reference to two of the main meat quality attributes that can be affected as consequence of non-appropriated handling practice and operations that implies the un-knowledge of animal conduct. The conclusion is that the handling practices previous to slaughter of ovine specie had a considerable influence on carcass quality. In Mexico is important to focus the cattle research on the productive systems improvement in consideration to animal welfare in the different productive process steps.

Do Leadership Style, Unit Climate, and Safety Climate Contribute to Safe Medication Practices?

Science.gov (United States)

Farag, Amany; Tullai-McGuinness, Susan; Anthony, Mary K; Burant, Christopher

2017-01-01

This study aims at: examining if leadership style and unit climate predict safety climate; and testing the direct, indirect, and total effect of leadership style, unit climate, and safety climate on nurses' safe medication practices. The Institute of Medicine and nursing scholars propose that safety climate is a prerequisite to safety practices. However, there is limited empirical evidence about factors contributing to the development of safety climate and about the association with nurses' safe medication practices. This cross-sectional study used survey data from 246 RNs working in a Magnet® hospital. Leadership style and unit climate predicted 20% to 50% of variance on all safety climate dimensions. Model testing revealed the indirect impact of leadership style and unit climate on nurses' safe medication practices. Our hypothesized model explained small amount of the variance on nurses' safe medication practices. This finding suggests that nurses' safe medication practices are influenced by multiple contextual and personal factors that should be further examined.

Handling final storage of unreprocessed spent nuclear fuel

International Nuclear Information System (INIS)

1978-01-01

The present second report from KBS describes how the safe final storage of spent unreprocessed nuclear fuel can be implemented. According to the Swedish Stipulation Law, the owner must specify in which form the waste is to be stored, how final storage is to be effected, how the waste is to be transported and all other aspects of fuel handling and storage which must be taken into consideration in judging whether the proposed final storage method can be considered to be absolutely safe and feasible. Thus, the description must go beyond general plans and sketches. The description is therefore relatively detailed, even concerning those parts which are less essential for evaluating the safety of the waste storage method. For those parts of the handling chain which are the same for both alternatives of the Stipulation Law, the reader is referred in some cases to the first report. Both of the alternatives of the Stipulation Law may be used in the future. Handling equipment and facilities for the two storage methods are so designed that a combination in the desired proportions is practically feasible. In this first part of the report are presented: premises and data, a description of the various steps of the handling procedure, a summary of dispersal processes and a safety analysis. (author)

Ground beef handling and cooking practices in restaurants in eight States.

Science.gov (United States)

Bogard, April K; Fuller, Candace C; Radke, Vincent; Selman, Carol A; Smith, Kirk E

2013-12-01

Eating in table-service restaurants has been implicated as a risk factor for Escherichia coli O157:H7 infection. To explore this association and learn about the prevalence of risky ground beef preparation practices in restaurants, the Environmental Health Specialists Network (EHS-Net) assessed ground beef handling policies and practices in restaurants in California, Colorado, Connecticut, Georgia, Minnesota, New York, Oregon, and Tennessee. Eligible restaurants prepared and served hamburgers. EHS-Net specialists interviewed a restaurant employee with authority over the kitchen (defined as the manager) using a standard questionnaire about food safety policies, hamburger preparation policies, and use of irradiated ground beef. Interviews were followed by observations of ground beef preparation. Data from 385 restaurants were analyzed: 67% of the restaurants were independently owned and 33% were chain restaurants; 75% of the restaurants were sit down, 19% were quick service or fast food, and 6% were cafeteria or buffet restaurants. Eighty-one percent of restaurants reported determining doneness of hamburgers by one or more subjective measures, and 49% reported that they never measure the final cook temperatures of hamburgers. At least two risky ground beef handling practices were observed in 53% of restaurants. Only 1% of restaurants reported purchasing irradiated ground beef, and 29% were unfamiliar with irradiated ground beef. Differences in risky ground beef handling policies and practices were noted for type of restaurant ownership (independently owned versus chain) and type of food service style (sit down versus quick service or fast food). This study revealed the pervasiveness of risky ground beef handling policies and practices in restaurants and the need for educational campaigns targeting food workers and managers. These results highlight the importance of continued efforts to reduce the prevalence of E. coli O157:H7 in ground beef.

Modern power station practice mechanical boilers, fuel-, and ash-handling plant

CERN Document Server

Sherry, A; Cruddace, AE

2014-01-01

Modern Power Station Practice, Second Edition, Volume 2: Mechanical (Boilers, Fuel-, and Ash-Handling Plant) focuses on the design, manufacture and operation of boiler units and fuel-and ash-handling plants.This book is organized into five main topics-furnace and combustion equipment, steam and water circuits, ancillary plant and fittings, dust extraction and draught plant, and fuel-and ash-handling plant.In these topics, this text specifically discusses the influence of nature of coal on choice of firing equipment; oil-burner arrangements, ignition and control; disposition of the heating surf

International conference on safe decommissioning for nuclear activities: Assuring the safe termination of practices involving radioactive materials. Contributed papers

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

Thousands of operations involving the use of radioactive substances will end during the current century. While there is considerable regulatory experience in the 'front end' of the regulatory system for practices, the experience at the back end is more limited as fewer practices have actually been terminated. When a practice is terminated because the facility has reached the end of its useful life, action has to betaken to ensure the safe shutdown of the facility and allow the removal of regulatory controls. There are many issues involved in the safe termination of practices. These include setting criteria for the release of material and sites from regulatory control; determining the suitability of the various options for decommissioning nuclear facilities, managing the waste and material released from control (recycling, reuse or disposal), and the eventual remediation of the site. Some countries have put in place regulatory infrastructures and have developed programmes to manage the associated decommissioning and remediation activities. Other countries are at the stage of assessing what is involved in terminating such practices. The purpose of this Conference is to foster an information exchange on the safe an orderly termination of practices that involve the use of radioactive substances, including both decommissioning and environmental remediation, and to promote improved coherence internationally on strategies and criteria for the safe termination of practices.

International conference on safe decommissioning for nuclear activities: Assuring the safe termination of practices involving radioactive materials. Contributed papers

International Nuclear Information System (INIS)

2002-01-01

Thousands of operations involving the use of radioactive substances will end during the current century. While there is considerable regulatory experience in the 'front end' of the regulatory system for practices, the experience at the back end is more limited as fewer practices have actually been terminated. When a practice is terminated because the facility has reached the end of its useful life, action has to betaken to ensure the safe shutdown of the facility and allow the removal of regulatory controls. There are many issues involved in the safe termination of practices. These include setting criteria for the release of material and sites from regulatory control; determining the suitability of the various options for decommissioning nuclear facilities, managing the waste and material released from control (recycling, reuse or disposal), and the eventual remediation of the site. Some countries have put in place regulatory infrastructures and have developed programmes to manage the associated decommissioning and remediation activities. Other countries are at the stage of assessing what is involved in terminating such practices. The purpose of this Conference is to foster an information exchange on the safe an orderly termination of practices that involve the use of radioactive substances, including both decommissioning and environmental remediation, and to promote improved coherence internationally on strategies and criteria for the safe termination of practices

Handling small arbovirus vectors safely during biosafety level 3 containment: Culicoides variipennis sonorensis (Diptera:Ceratopogonidae) and exotic bluetongue viruses.

Science.gov (United States)

Hunt, G J; Tabachnick, W J

1996-05-01

Equipment and procedures are described for biosafety level 3 (BL-3) containment work with small, zoophilic arthropods. BL-3 classified pathogens always must be manipulated in biological safety cabinets. Procedures, including physical barriers and handling methods, that prevent the escape of potentially virus-infected insects are discussed, and the use of a monitoring system for insect security is explained. The inability to recover escaped minute, flying insects poses a major difference from similar work with larger insects, such as mosquitoes. Methods were developed for the safe and secure handling of Culicoides variipennis sonorensis Wirth & Jones infected with exotic bluetongue viruses during BL-3 containment.

Safe handling of TBP and nitrates in the nuclear process industry

International Nuclear Information System (INIS)

Hyder, M.L.

1994-07-01

A laboratory and literature study was made of the reactions of tri-n-butyl phosphate (TBP) with nitric acid and nitrates. Its goal was to establish safe conditions for solvent extraction processes involving these chemicals. The damaging explosions at the Tomsk-7 PUREX plant in Russia graphically illustrated the potential hazard involved in such operations. The study has involved a review of prior and contemporary experiments, and new experiments to answer particular questions about these reactions. TBP extracts nitric acid and some metal nitrates from aqueous solutions. The resulting liquid contains both oxidant and reductant, and can react exothermically if heated sufficiently. Safe handling of these potentially reactive materials involves not only limiting the heat generated by the chemical reaction, but also providing adequate heat removal and venting. Specifically, the following recommendations are made to ensure safety: (1) tanks in which TBP-nitrate complexes are or may be present should be adequately vented to avoid pressurization. Data are supplied as a basis for adequacy; (2) chemically degraded TBP, or TBP that has sat a long time in the presence of acids or radiation, should be purified before use in solvent extraction; (3) evaporators in which TBP might be introduced should be operated at a controlled temperature, and their TBP content should be limited; (4) evaporator bottoms that may contain TBP should be cooled under conditions that ensure heat removal. Finally, process design should consider the potential for such reactions, and operators should be made aware of this potential, so that it is considered during training and process operation

A survey on knowledge and self-reported formula handling practices of parents and child care workers in Palermo, Italy

Directory of Open Access Journals (Sweden)

Mammina Caterina

2009-12-01

Full Text Available Abstract Background Powdered infant formula (PIF is not a sterile product, but this information appears to be poorly diffused among child caregivers. Parents and child care workers may behave in an unsafe manner when handling PIF. Methods This study involved parents and child care workers in the 24 municipal child care centres of Palermo. Knowledge and self-reported practices about PIF handling were investigated by a structured questionnaire. A Likert scale was used to measure the strength of the respondent's feelings. Association of knowledge and self-reported practices with demographic variables was also evaluated. Results 42.4% of parents and 71.0% of child care workers filled in the questionnaire. Significant differences were found between parents and child care workers for age and education. 73.2% of parents and 84.4% of child care workers were confident in sterility of PIF. Generally, adherence to safe procedures when reconstituting and handling PIF was more frequently reported by child care workers who, according to the existing legislation, are regularly subjected to a periodic training on food safety principles and practices. Age and education significantly influenced the answers to the questionnaire of both parents and child care workers. Conclusion The results of the study reveal that parents and child care workers are generally unaware that powdered formulas may contain viable microorganisms. However, child care workers consistently chose safer options than parents when answering the questions about adherence to hygienic practices. At present it seems unfeasible to produce sterile PIF, but the risk of growth of hazardous organisms in formula at the time of administration should be minimized by promoting safer behaviours among caregivers to infants in both institutional settings and home.

Food Handling Practices and Food Safety Messaging Preferences of African American and Latino Consumers

Directory of Open Access Journals (Sweden)

Emily Patten

2018-02-01

Full Text Available Extensive research on consumer food handling has identified common practices that could negatively impact food safety. Limited research has considered if food handling practices differ among diverse groups or if unique approaches are needed to provide food safety education for different audiences. This study examined food handling practice differences between African-American and Latino consumers and differing responses to food safety messages. Four focus groups were conducted, two with African-American participants and two with Latino participants, with each focus group consisting of 10-15 participants. Focus group transcripts were reviewed, coded, and grouped into themes using an iterative process. The 50 participants self-identified as either African-American or Latino, had home meal preparation experience, and were 18 years or older. Each focus group was multigenerational and included males and females. Risky food handling practices reported by both groups included rinsing poultry before cooking and limited food thermometer use. African-American participants preferred informational food safety messages, whereas Latino participants were split in preferring informational, guilt-inducing, and fear-inducing messages.

Some considerations in the handling of fluorine and the chlorine fluorides

International Nuclear Information System (INIS)

Farrar, R.L. Jr.; Barber, E.J.

1979-01-01

This paper reviews many considerations in the safe handling of fluorine and the chlorine fluorides. The physical, chemical, and toxicological properties of the materials are reviewed. Proper choice of materials of construction and materials in contact with the active gases are considered. The survey includes safe practices in design and operation of experiments and processes. Soda lime traps and caustic scrubbing are reviewed for fluorine disposal methods. Finally some explosive reactions and explosive situations are discussed

Safe injection procedures, injection practices, and needlestick ...

African Journals Online (AJOL)

Nermine Mohamed Tawfik Foda

2017-01-10

Jan 10, 2017 ... Background: Of the estimated 384,000 needle-stick injuries occurring in hospitals each year, 23% occur in surgical settings. This study was conducted to assess safe injection procedures, injection practices, and circumstances contributing to needlestick and sharps injures (NSSIs) in operating rooms.

Effects of Variety and Postharvest Handling Practices on Microbial Population at Different Stages of the Value Chain of Fresh Tomato (Solanum lycopersicum) in Western Terai of Nepal.

Science.gov (United States)

Khadka, Ram B; Marasini, Madan; Rawal, Ranjana; Gautam, Durga M; Acedo, Antonio L

2017-01-01

Background . Fresh vegetables such as tomato should have low microbial population for safe consumption and long storage life. The aerobic bacterial count (ABC) and coliform bacterial count (CBC), yeast, and mold population are the most widely used microbial indicators in fresh vegetables which should be lower than 4 log CFU g -1 for safe consumption. The stages of the supply chain, postharvest handling methods, and crop varieties had significant effects on microbial population. ABC, CBC, yeast, and mold population were significantly highest ( P < 0.05) at retail market (5.59, 4.38, 2.60, and 3.14 log CFU g -1 , resp.), followed by wholesale market (4.72, 4.71, 2.43, and 2.44 log CFU g -1 , resp.), and were least at farm gate (3.89, 3.63, 2.38, and 2.03 log CFU g -1 , resp.). Improved postharvest practices (washing in clean water and grading and packaging in clean plastic crate) helped to reduce ABC, CBC, and mold population by 2.51, 32.70, and 29.86 percentage as compared to the conventional method (no washing and no grading and packaging in mud plastered bamboo baskets). Among varieties, Pusa ruby had the lowest microbial load of 2.58, 4.53, 0.96, and 1.77 log CFU g -1 for ABC, CBC, yeast, and mold count, respectively. Significantly negative correlation ( P < 0.05) was observed between fruit pH & ABC and pH & mold count. Although the microbial quality of fresh tomato is safe in the local market of western Terai of Nepal both in conventional and in improved practices however still it is essential to follow improved postharvest handling practices in production and marketing of newly introduced tomato cultivars (high-pH cultivars) for ensuring the safe availability of fresh tomato in the market.

Consumer knowledge, storage, and handling practices regarding Listeria in frankfurters and deli meats: results of a Web-based survey.

Science.gov (United States)

Cates, Sheryl C; Morales, Roberta A; Karns, Shawn A; Jaykus, Lee-Ann; Kosa, Katherine M; Teneyck, Toby; Moore, Christina M; Cowen, Peter

2006-07-01

Proper storage and handling of refrigerated ready-to-eat foods can help reduce the risk of listeriosis. A national Web-based survey was conducted to measure consumer awareness and knowledge of Listeria and to estimate the prevalence of the U.S. Department of Agriculture-recommended consumer storage and handling practices for frankfurters and deli meats. The demographic characteristics of consumers who are unaware of Listeria and who do not follow the recommended storage guidelines were also assessed. In addition, predictive models were developed to determine which consumers engage in risky storage practices. Less than half of the consumers surveyed were aware of Listeria, and most of those aware were unable to identify associated food vehicles. Awareness was lower among adults 60 years of age and older, an at-risk population for listeriosis, and individuals with relatively less education and lower incomes. Most households safely stored and prepared frankfurters. Most households stored unopened packages of vacuum-packed deli meats in the refrigerator within the U.S. Department of Agriculture-recommended storage guidelines (deli meats and freshly sliced deli meats for longer than the recommended time (< or =5 days). Men, more-educated individuals, and individuals living in metropolitan areas were more likely to engage in risky storage practices. This study identified the need to develop targeted educational initiatives on listeriosis prevention.

Solutions for Safe Hot Coil Evacuation and Coil Handling in Case of Thick and High Strength Steel

Directory of Open Access Journals (Sweden)

Sieberer Stefan

2016-01-01

Full Text Available Currently hot rolling plants are entering the market segment for thick gauges and high strength steel grades where the elastic bending property of the strip leads to internal forces in the coil during coiling operation. The strip tends to open. Primetals is investigating several possibilities to facilitate safe coil evacuation and coil handling under spring-back conditions. The contribution includes finite element models of such mechanical solutions. Results of parameter variation and stability limits of case studies are presented in the paper.

Can control banding be useful for the safe handling of nanomaterials? A systematic review

Science.gov (United States)

Eastlake, Adrienne; Zumwalde, Ralph; Geraci, Charles

2016-06-01

Control banding (CB) is a risk management strategy that has been used to identify and recommend exposure control measures to potentially hazardous substances for which toxicological information is limited. The application of CB and level of expertise required for implementation and management can differ depending on knowledge of the hazard potential, the likelihood of exposure, and the ability to verify the effectiveness of exposure control measures. A number of different strategies have been proposed for using CB in workplaces where exposure to engineered nanomaterials (ENMs) can occur. However, it is unclear if the use of CB can effectively reduce worker exposure to nanomaterials. A systematic review of studies was conducted to answer the question "can control banding be useful to ensure adequate controls for the safe handling of nanomaterials." A variety of databases were searched to identify relevant studies pertaining to CB. Database search terms included `control,' `hazard,' `exposure,' and `risk' banding as well as the use of these terms in the context of nanotechnology or nanomaterials. Other potentially relevant studies were identified during the review of articles obtained in the systematic review process. Identification of studies and the extraction of data were independently conducted by the reviewers. Quality of the studies was assessed using the methodological index for nonrandomized studies. The quality of the evidence was evaluated using grading of recommendations assessment, development and evaluation (GRADE). A total of 235 records were identified in the database search in which 70 records were determined to be eligible for full-text review. Only two studies were identified that met the inclusion criteria. These studies evaluated the application of the CB Nanotool in workplaces where ENMs were being handled. A total of 32 different nanomaterial handling activities were evaluated in these studies by comparing the recommended exposure controls using

Tritium handling experience at Atomic Energy of Canada Limited

Energy Technology Data Exchange (ETDEWEB)

Suppiah, S.; McCrimmon, K.; Lalonde, S.; Ryland, D.; Boniface, H.; Muirhead, C.; Castillo, I. [Atomic Energy of Canad Limited - AECL, Chalk River Laboratories, Chalk River, ON (Canada)

2015-03-15

Canada has been a leader in tritium handling technologies as a result of the successful CANDU reactor technology used for power production. Over the last 50 to 60 years, capabilities have been established in tritium handling and tritium management in CANDU stations, tritium removal processes for heavy and light water, tritium measurement and monitoring, and understanding the effects of tritium on the environment. This paper outlines details of tritium-related work currently being carried out at Atomic Energy of Canada Limited (AECL). It concerns the CECE (Combined Electrolysis and Catalytic Exchange) process for detritiation, tritium-compatible electrolysers, tritium permeation studies, and tritium powered batteries. It is worth noting that AECL offers a Tritium Safe-Handling Course to national and international participants, the course is a mixture of classroom sessions and hands-on practical exercises. The expertise and facilities available at AECL is ready to address technological needs of nuclear fusion and next-generation nuclear fission reactors related to tritium handling and related issues.

Air-handling energy efficiency and design practices

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Lars J.

1993-12-31

With good design practices and life-cycle cost optimization, specific fan power for individual fans will be between 0.5 and 1kW/m{sup 3}/s. Data from nearly 1000 audited fans in Sweden show that the average measured SFPI weighted by drawn motor power is 1.5 kW/m{sup 3}/s and the situation appears to be similar in other countries. Contract forms used by Swedish builders, and consultants` design practices are analyzed here to search for an explanation to the low performance of installed systems. Identified as two major barriers to efficient system design are the lack of performance specifications when procuring systems and the incentive structure in the building sector. As a consequence, duct design methods, rules of thumb, and vendor recommendations are not leading to system optimization. The broad minima in life cycle costs over a range of air-handling unit sizes show that potential economic welfare losses from efficiency standards are likely to be smaller than the losses that result from today`s design practices. 73 refs, 4 figs, 3 tabs

Air-handling energy efficiency and design practices

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Lars J

1994-12-31

With good design practices and life-cycle cost optimization, specific fan power for individual fans will be between 0.5 and 1kW/m{sup 3}/s. Data from nearly 1000 audited fans in Sweden show that the average measured SFPI weighted by drawn motor power is 1.5 kW/m{sup 3}/s and the situation appears to be similar in other countries. Contract forms used by Swedish builders, and consultants` design practices are analyzed here to search for an explanation to the low performance of installed systems. Identified as two major barriers to efficient system design are the lack of performance specifications when procuring systems and the incentive structure in the building sector. As a consequence, duct design methods, rules of thumb, and vendor recommendations are not leading to system optimization. The broad minima in life cycle costs over a range of air-handling unit sizes show that potential economic welfare losses from efficiency standards are likely to be smaller than the losses that result from today`s design practices. 73 refs, 4 figs, 3 tabs

Can Control Banding be Useful for the Safe Handling of Nanomaterials? A Systematic Review

Science.gov (United States)

Eastlake, Adrienne; Zumwalde, Ralph; Geraci, Charles

2016-01-01

Objectives Control banding (CB) is a risk management strategy that has been used to identify and recommend exposure control measures to potentially hazardous substances for which toxicological information is limited. The application of CB and level of expertise required for implementation and management can differ depending on knowledge of the hazard potential, the likelihood of exposure, and the ability to verify the effectiveness of exposure control measures. A number of different strategies have been proposed for using CB in workplaces where exposure to engineered nanomaterials (ENMs) can occur. However, it is unclear if the use of CB can effectively reduce worker exposure to nanomaterials. A systematic review of studies was conducted to answer the question “can control banding be useful to ensure adequate controls for the safe handling of nanomaterials.” Methods A variety of databases were searched to identify relevant studies pertaining to CB. Database search terms included ‘control’, ‘hazard’, ‘exposure’ and ‘risk’ banding as well as the use of these terms in the context of nanotechnology or nanomaterials. Other potentially relevant studies were identified during the review of articles obtained in the systematic review process. Identification of studies and the extraction of data were independently conducted by the reviewers. Quality of the studies was assessed using the Methodological Index for Non-Randomized Studies (MINORS). The quality of the evidence was evaluated using Grading of Recommendations Assessment, Development and Evaluation (GRADE). Results A total of 235 records were identified in the database search in which 70 records were determined to be eligible for full-text review. Only two studies were identified that met the inclusion criteria. These studies evaluated the application of the CB Nanotool in workplaces where ENMs were being handled. A total of 32 different nanomaterial handling activities were evaluated in these

Can control banding be useful for the safe handling of nanomaterials? A systematic review

International Nuclear Information System (INIS)

Eastlake, Adrienne; Zumwalde, Ralph; Geraci, Charles

2016-01-01

Control banding (CB) is a risk management strategy that has been used to identify and recommend exposure control measures to potentially hazardous substances for which toxicological information is limited. The application of CB and level of expertise required for implementation and management can differ depending on knowledge of the hazard potential, the likelihood of exposure, and the ability to verify the effectiveness of exposure control measures. A number of different strategies have been proposed for using CB in workplaces where exposure to engineered nanomaterials (ENMs) can occur. However, it is unclear if the use of CB can effectively reduce worker exposure to nanomaterials. A systematic review of studies was conducted to answer the question “can control banding be useful to ensure adequate controls for the safe handling of nanomaterials.” A variety of databases were searched to identify relevant studies pertaining to CB. Database search terms included ‘control,’ ‘hazard,’ ‘exposure,’ and ‘risk’ banding as well as the use of these terms in the context of nanotechnology or nanomaterials. Other potentially relevant studies were identified during the review of articles obtained in the systematic review process. Identification of studies and the extraction of data were independently conducted by the reviewers. Quality of the studies was assessed using the methodological index for nonrandomized studies. The quality of the evidence was evaluated using grading of recommendations assessment, development and evaluation (GRADE). A total of 235 records were identified in the database search in which 70 records were determined to be eligible for full-text review. Only two studies were identified that met the inclusion criteria. These studies evaluated the application of the CB Nanotool in workplaces where ENMs were being handled. A total of 32 different nanomaterial handling activities were evaluated in these studies by comparing the recommended

Can control banding be useful for the safe handling of nanomaterials? A systematic review

Energy Technology Data Exchange (ETDEWEB)

Eastlake, Adrienne, E-mail: aeastlake@cdc.gov [National Institute for Occupational Safety and Health, Nanotechnology Research Center (United States); Zumwalde, Ralph [RCS Corporation (United States); Geraci, Charles [National Institute for Occupational Safety and Health, Nanotechnology Research Center (United States)

2016-06-15

Control banding (CB) is a risk management strategy that has been used to identify and recommend exposure control measures to potentially hazardous substances for which toxicological information is limited. The application of CB and level of expertise required for implementation and management can differ depending on knowledge of the hazard potential, the likelihood of exposure, and the ability to verify the effectiveness of exposure control measures. A number of different strategies have been proposed for using CB in workplaces where exposure to engineered nanomaterials (ENMs) can occur. However, it is unclear if the use of CB can effectively reduce worker exposure to nanomaterials. A systematic review of studies was conducted to answer the question “can control banding be useful to ensure adequate controls for the safe handling of nanomaterials.” A variety of databases were searched to identify relevant studies pertaining to CB. Database search terms included ‘control,’ ‘hazard,’ ‘exposure,’ and ‘risk’ banding as well as the use of these terms in the context of nanotechnology or nanomaterials. Other potentially relevant studies were identified during the review of articles obtained in the systematic review process. Identification of studies and the extraction of data were independently conducted by the reviewers. Quality of the studies was assessed using the methodological index for nonrandomized studies. The quality of the evidence was evaluated using grading of recommendations assessment, development and evaluation (GRADE). A total of 235 records were identified in the database search in which 70 records were determined to be eligible for full-text review. Only two studies were identified that met the inclusion criteria. These studies evaluated the application of the CB Nanotool in workplaces where ENMs were being handled. A total of 32 different nanomaterial handling activities were evaluated in these studies by comparing the recommended

Consumer food handling in the home: a review of food safety studies.

Science.gov (United States)

Redmond, Elizabeth C; Griffith, Christopher J

2003-01-01

Epidemiological data from Europe, North America, Australia, and New Zealand indicate that a substantial proportion of foodborne disease is attributable to improper food preparation practices in consumers' homes. International concern about consumer food safety has prompted considerable research to evaluate domestic food-handling practices. The majority of consumer food safety studies in the last decade have been conducted in the United Kingdom and Northern Ireland (48%) and in the United States (42%). Surveys (questionnaires and interviews), the most frequent means of data collection, were used in 75% of the reviewed studies. Focus groups and observational studies have also been used. One consumer food safety study examined the relationship between pathogenic microbial contamination from raw chicken and observed food-handling behaviors, and the results of this study indicated extensive Campylobacter cross-contamination during food preparation sessions. Limited information about consumers' attitudes and intentions with regard to safe food-handling behaviors has been obtained, although a substantial amount of information about consumer knowledge and self-reported practices is available. Observation studies suggest that substantial numbers of consumers frequently implement unsafe food-handling practices. Knowledge, attitudes, intentions, and self-reported practices did not correspond to observed behaviors, suggesting that observational studies provide a more realistic indication of the food hygiene actions actually used in domestic food preparation. An improvement in consumer food-handling behavior is likely to reduce the risk and incidence of foodborne disease. The need for the development and implementation of food safety education strategies to improve specific food safety behaviors is reviewed in this paper.

Factors affecting food handling Practices among food handlers of Dangila town food and drink establishments, North West Ethiopia

Science.gov (United States)

2014-01-01

Background Food borne diseases are major health problems in developed and developing countries including Ethiopia. The problem is more noticeable in developing countries due to prevailing poor food handling and sanitation practices, inadequate food safety laws, weak regulatory systems, lack of financial resources to invest on safer equipments, and lack of education for food handlers. Methods The objective of this study was to assess food handling practice and associated factors among food handlers working in food and drinking establishments of Dangila town, North West Ethiopia. Cross-sectional quantitative study design was conducted among 406 food handlers working in 105 food and drink establishments from July to August 2013 in Dangila town. Data were collected using face to face interview with pretested structured questionnaire and physical observation. Result The mean age of the respondents was 22.7 ± 4.2 years of which 62.8% of the food handlers were females. Two hundred thirteen (52.5%) of food handlers had good food handling practices. Marital status (AOR = 7.52, 95% CI, 1.45-38.97), monthly income (AOR = 0.395, 95% CI, 0.25-0.62), knowledge about food handling (AOR = 1.69, 95% CI, 1.05-2.73), existence of shower facility (AOR = 1.89, 95% CI, 1.12-3.21) and separate dressing room (AOR = 1.97, 95% CI, 1.11-3.49) were found to be significantly associated with good food handling Practices. Conclusion Above half of food handlers had good food handling practices. Marital status, monthly income, knowledge status, existence of shower facility, existence of separate dressing room and presence of insect and rodent were factors associated with food handling Practices. PMID:24908104

Improving safety-related knowledge, attitude and practices of nurses handling cytotoxic anticancer drug: pharmacists' experience in a general hospital, Malaysia.

Science.gov (United States)

Keat, Chan Huan; Sooaid, Nor Suhada; Yun, Cheng Yi; Sriraman, Malathi

2013-01-01

An increasing trend of cytotoxic drug use, mainly in cancer treatment, has increased the occupational exposure among the nurses. This study aimed to assess the change of nurses' safety-related knowledge as well as attitude levels and subsequently to assess the change of cytotoxic drug handling practices in wards after a series of pharmacist-based interventions. This prospective interventional study with a before and after design requested a single group of 96 nurses in 15 wards actively providing chemotherapy to answer a self-administered questionnaire. A performance checklist was then used to determine the compliance of all these wards with the recommended safety measures. The first and second assessments took 2 months respectively with a 9-month intervention period. Pharmacist-based interventions included a series of technical, educational and administrative support measures consisting of the initiation of closed-system cytotoxic drug reconstitution (CDR) services, courses, training workshops and guideline updates. The mean age of nurses was 32.2∓6.19 years. Most of them were female (93.8%) and married (72.9%). The mean knowledge score of nurses was significantly increased from 45.5∓10.52 to 73.4∓8.88 out of 100 (p<0.001) at the end of the second assessment. Overall, the mean practice score among the wards was improved from 7.6∓5.51 to 15.3∓2.55 out of 20 (p<0.001). The pharmacist-based interventions improved the knowledge, attitude and safe practices of nurses in cytotoxic drug handling. Further assessment may help to confirm the sustainability of the improved practices.

Interactive eLearning - a safe place to practice.

Science.gov (United States)

Einarson, Elisabeth; Moen, Anne; Kolberg, Ragnhild; Flingtorp, Gry; Linnerud, Eva

2009-01-01

Interactive web-based learning environment offers refreshing opportunities to create innovative solutions to explore and exploit informatics support on-the-job training. We report from a study where a hospital is created a interactive eLearning resource. The modules are creating a safe place to practice - to be used for introduction to the work and preparation for certification or re-certification of competencies.

Safe injection practice among health-care workers in Gharbiya Governorate, Egypt.

Science.gov (United States)

Ismail, N A; Aboul Ftouh, A M; El-Shoubary, W H; Mahaba, H

2007-01-01

We assessed safe injection practices among 1100 health-care workers in 25 health-care facilities in Gharbiya Governorate. Questionnaires were used to collect information and 278 injections were observed using a standardized checklist. There was a lack of infection control policies in all the facilities and a lack of many supplies needed for safe injection. Proper needle manipulation before disposal was observed in only 41% of injections, safe needle disposal in 47.5% and safe syringe disposal in 0%. Reuse of used syringes and needles was reported by 13.2% of the health-care workers and 66.2% had experienced a needle-stick injury. Only 11.3% had received a full course of hepatitis B vaccination.

Adoption of sun safe workplace practices by local governments.

Science.gov (United States)

Wallis, Allan; Andersen, Peter A; Buller, David B; Walkosz, Barbara; Lui, Lucia; Buller, Mary; Scott, Michael D; Jenkins, Rob

2014-01-01

Outdoor workers are especially susceptible to skin cancer--the most common, but also one of the most preventable, forms of cancer. Colorado, the location of the study, has the second highest rate of skin cancer deaths in the nation. Local government managers in Colorado-in municipalities, counties, and special districts-were surveyed to ascertain the extent to which they engage in formal (written) and informal practices to protect their outdoor workers against excessive exposure to sun. The survey consisted of 51 questions assessing awareness of formal or informal practices for sun protection of outdoor workers. An index of practices--the study's dependent variable--was created that was composed or practices such as providing employees free or reduced-cost sunscreen, wide-brimmed hats, sunglasses, long-sleeved work shirts, long work pants, and temporary or permanent outdoor shade shelters. Proscriptive policies, such as restricting the use of broad brimmed hats, were subtracted from the index. Surveys were completed by 825 administrators representing 98 jurisdictions. Responses from administrators in the same jurisdiction were averaged. More than 40% of responding jurisdictions indicated that they engaged in informal sun safety practices. Tests conducted to determine what variables might account for the adoption of these sun protection practices found that the degree to which a community could be regarded as cosmopolite and as having an individualistic political culture were significant predictors. Type of government was also significant. Although, higher community income was a significant predictor, neither local government budget nor size was significant. The adoption of sun safe practices bears low costs with potentially high returns. Findings from this study suggest that awareness campaigns might most effectively target cosmopolite communities, but that the greatest impact might be achieved by targeting localite communities. Government size and budget do not

Safe Minimum Internal Temperature Chart

Science.gov (United States)

... Internal Temperature Chart Safe steps in food handling, cooking, and storage are essential in preventing foodborne illness. You can't see, smell, or taste harmful bacteria that may cause illness. In every step of food preparation, follow the four guidelines to keep food safe: ...

Guidelines for safe handling of toxins. Technical report

Energy Technology Data Exchange (ETDEWEB)

Szilagyi, M.

1995-11-01

Toxins are highly toxic chemicals which cause illness through all routes of entry into the body. This technical note has been prepared to ensure that preparation, handling, and disposal of toxins does not constitute a greater occupational hazard than is necessary. It includes hazards that may be encountered and the precautions that should be taken against such hazards.

Nurses' clinical reasoning practices that support safe medication administration: An integrative review of the literature.

Science.gov (United States)

Rohde, Emily; Domm, Elizabeth

2018-02-01

To review the current literature about nurses' clinical reasoning practices that support safe medication administration. The literature about medication administration frequently focuses on avoiding medication errors. Nurses' clinical reasoning used during medication administration to maintain medication safety receives less attention in the literature. As healthcare professionals, nurses work closely with patients, assessing and intervening to promote mediation safety prior to, during and after medication administration. They also provide discharge teaching about using medication safely. Nurses' clinical reasoning and practices that support medication safety are often invisible when the focus is medication errors avoidance. An integrative literature review was guided by Whittemore and Knafl's (Journal of Advanced Nursing, 5, 2005 and 546) five-stage review of the 11 articles that met review criteria. This review is modelled after Gaffney et al.'s (Journal of Clinical Nursing, 25, 2016 and 906) integrative review on medical error recovery. Health databases were accessed and systematically searched for research reporting nurses' clinical reasoning practices that supported safe medication administration. The level and quality of evidence of the included research articles were assessed using The Johns Hopkins Nursing Evidence-Based Practice Rating Scale©. Nurses have a central role in safe medication administration, including but not limited to risk awareness about the potential for medication errors. Nurses assess patients and their medication and use knowledge and clinical reasoning to administer medication safely. Results indicated nurses' use of clinical reasoning to maintain safe medication administration was inadequately articulated in 10 of 11 studies reviewed. Nurses are primarily responsible for safe medication administration. Nurses draw from their foundational knowledge of patient conditions and organisational processes and use clinical reasoning that

Materials Handling. Module SH-01. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on materials handling is one of 50 modules concerned with job safety and health. It presents the procedures for safe materials handling. Discussed are manual handling methods (lifting and carrying by hand) and mechanical lifting (lifting by powered trucks, cranes or conveyors). Following the introduction, 15 objectives (each…

Toward Improving Food Safety in the Domestic Environment: A Multi-Item Rasch Scale for the Measurement of the Safety Efficacy of Domestic Food-Handling Practices

NARCIS (Netherlands)

Fischer, A.R.H.; Frewer, L.J.; Nauta, M.J.

2006-01-01

To reduce consumer health risks from foodborne diseases that result from improper domestic food handling, consumers need to know how to safely handle food. To realize improvements in public health, it is necessary to develop interventions that match the needs of individual consumers. Successful

Monitoring of airborne contamination during the handling of technetium-99m and radioiodine

International Nuclear Information System (INIS)

Eadie, A.S.; Horton, P.W.; Hilditch, T.E.

1980-01-01

Measurements have been made using an air sampler to measure airborne radioactivity produced during the routine handling of large activities of technetium-99m, iodine-125 and iodine-131. The results indicate that 99 Tcsup(m) can be safely handled in environments without direct exhaust of the ventilated air but that 125 I and 131 I should always be handled in a ventilated environment such as a fume cupboard or a down-draught work-station of the total-exhaust type. Monitoring of thyroid uptake proves to be the most reliable means of monitoring airborne contamination by these radionuclides, but burdens and radiation doses for typical procedures are well within the maximum permissible limits of the Code of Practice for the Protection of Persons from Ionizing Radiation arising from Medical and Dental Use. (author)

Safe sleep practices and sudden infant death syndrome risk reduction: NICU and well-baby nursery graduates.

Science.gov (United States)

Fowler, Aja J; Evans, Patricia W; Etchegaray, Jason M; Ottenbacher, Allison; Arnold, Cody

2013-11-01

Our primary objective was to compare parents of infants cared for in newborn intensive care units (NICUs) and infants cared for in well-baby ("general") nurseries with regard to knowledge and practice of safe sleep practices/sudden infant death syndrome risk reduction measures and guidelines. Our secondary objective was to obtain qualitative data regarding reasons for noncompliance in both populations. Sixty participants (30 from each population) completed our survey measuring safe sleep knowledge and practice. Parents of NICU infants reported using 2 safe sleep practices-(a) always placing baby in crib to sleep and (b) always placing baby on back to sleep-significantly more frequently than parents of well infants. Additional findings and implications for future studies are discussed.

Design approach for safe tritium handling in ITER

International Nuclear Information System (INIS)

Ohira, Shigeru

2002-01-01

Outlines for tritium handling and a fundamental approach for ensuring safety are presented. The amount of tritium stored and processed in the ITER facility will be much larger than that in the existing facilities for fusion research, though the processing methods and the conditions of processing (e.g., concentration, pressure, etc.) will be similar for those used in those facilities. Therefore, considerations to be taken for tritium handling, such as limitations of tritium permeation and leaks, provision of an appropriate ventilation/detritiation system for maintenance, measures to ensure mechanical integrity, etc., can be provided based on the knowledge obtained in the facilities. The Technical Advisory Committee of the Science and Technology Agency established a fundamental approach in 2000, and set out the basic safety principles and approaches as technical requirements of safety design and assessment, which were derived from the safety characteristics of the ITER plant. Sufficient prevention of accidents can be achieved by ensuring and maintaining the structural integrity of the enclosures containing radioactive materials against the loads anticipated during operation, and a low hazard potential of radioactive materials, sufficiently within prescribed limits, can be maintained by the vitiation and clean-up system even if large release is postulated. (author)

Biosafety Procedure for Safe Handling of Genetically Modified Plant Materials in Bio Design Facility

International Nuclear Information System (INIS)

Zaiton Ahmad; Shuhaimi Shamsudin; Mohamed Najli Mohamed Yasin; Affrida Abu Hassan; Mohd Zaid Hassan; Rusli Ibrahim

2015-01-01

Bio Design Facility is the specifically designed glass house for propagation, screening and analysis of high quality plant varieties developed through biotechnology or a combination of nuclear technology and biotechnology. High quality plant varieties especially genetically modified plants (GMO) require a special glass house facility for propagation and screening to isolate them from cross-pollinating with wild type varieties in surrounding ecosystem, and for carrying out evaluation of possible risks of the plants to human, animal and environment before they are proven safe for field trials or commercial release. This facility which was developed under the Ninth Malaysia Plan is classified as the Plant Containment Level 2 and is compliance with the bio safety regulations and guidance for the safe release of GMO according to Malaysian Bio safety Act 2007. Bio Design Facility is fully operational since 2010 and in 2012, it has also been certified as the glass house for post-entry quarantine by The Department of Agriculture. This paper summarizes the bio safety procedure for a safe, controlled and contained growing and evaluation of GMO in Bio Design Facility. This procedure covers the physical (containment and equipment's) and operational (including responsibility, code of practice, growing, decontamination and disposal of plant materials, emergency and contingency plan) aspects of the facility. (author)

Enclosure for handling high activity materials

International Nuclear Information System (INIS)

Jimeno de Osso, F.

1977-01-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

Enclosure for handling high activity materials

Energy Technology Data Exchange (ETDEWEB)

Jimeno de Osso, F

1977-07-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

MRI-guided stereotactic neurosurgical procedures in a diagnostic MRI suite: Background and safe practice recommendations.

Science.gov (United States)

Larson, Paul S; Willie, Jon T; Vadivelu, Sudhakar; Azmi-Ghadimi, Hooman; Nichols, Amy; Fauerbach, Loretta Litz; Johnson, Helen Boehm; Graham, Denise

2017-07-01

The development of navigation technology facilitating MRI-guided stereotactic neurosurgery has enabled neurosurgeons to perform a variety of procedures ranging from deep brain stimulation to laser ablation entirely within an intraoperative or diagnostic MRI suite while having real-time visualization of brain anatomy. Prior to this technology, some of these procedures required multisite workflow patterns that presented significant risk to the patient during transport. For those facilities with access to this technology, safe practice guidelines exist only for procedures performed within an intraoperative MRI. There are currently no safe practice guidelines or parameters available for facilities looking to integrate this technology into practice in conventional MRI suites. Performing neurosurgical procedures in a diagnostic MRI suite does require precautionary measures. The relative novelty of technology and workflows for direct MRI-guided procedures requires consideration of safe practice recommendations, including those pertaining to infection control and magnet safety issues. This article proposes a framework of safe practice recommendations designed for assessing readiness and optimization of MRI-guided neurosurgical interventions in the diagnostic MRI suite in an effort to mitigate patient risk. The framework is based on existing clinical evidence, recommendations, and guidelines related to infection control and prevention, health care-associated infections, and magnet safety, as well as the clinical and practical experience of neurosurgeons utilizing this technology. © 2017 American Society for Healthcare Risk Management of the American Hospital Association.

Food safety knowledge, attitudes and self-reported practices among Ontario high school students.

Science.gov (United States)

Majowicz, Shannon E; Diplock, Kenneth J; Leatherdale, Scott T; Bredin, Chad T; Rebellato, Steven; Hammond, David; Jones-Bitton, Andria; Dubin, Joel A

2016-03-16

To measure the food safety knowledge, attitudes and self-reported practices of high school students in Ontario. We administered a school-wide paper survey to the student body (n = 2,860) of four Ontario high schools. We developed the survey by selecting questions from existing, validated questionnaires, prioritizing questions that aligned with the Canadian Partnership for Consumer Food Safety Education's educational messages and the food safety objectives from the 2013 Ontario High School Curriculum. One in five students reported currently handling food in commercial or public-serving venues; of these, 45.1% had ever taken a course that taught them how to prepare food (e.g., food and nutrition classes, food handler certification). Food safety knowledge among respondents was low. For example, 17.3% knew that the best way to determine whether hamburgers were cooked enough to eat was to measure the temperature with a food thermometer. Despite low knowledge, most respondents (72.7%) reported being confident that they could cook safe, healthy meals for themselves and their families. Safe food handling practices were frequently self-reported. Most students (86.5%) agreed that being able to cook safe, healthy meals was an important life skill, although their interest in learning about safe food handling and concern about foodborne disease were less pronounced. Our findings suggest that food safety knowledge is low, yet confidence in preparing safe, healthy meals is high, among high school students. Because work and volunteer opportunities put students in contact with both the public and food, this group is important to target for increased education about safe food handling.

A Standardized Shift Handover Protocol: Improving Nurses’ Safe Practice in Intensive Care Units

Directory of Open Access Journals (Sweden)

Javad Malekzadeh

2013-08-01

Full Text Available Introduction: For maintaining the continuity of care and improving the quality of care, effective inter-shift information communication is necessary. Any handover error can endanger patient safety. Despite the importance of shift handover, there is no standard handover protocol in our healthcare settings. Methods In this one-group pretest-posttest quasi-experimental study conducted in spring and summer of 2011, we recruited a convenience sample of 56 ICU nurses. The Nurses’ Safe Practice Evaluation Checklist was used for data collection. The Content Validity Index and the inter-rater correlation coefficient of the checklist was 0.92 and 89, respectively. We employed the SPSS 11.5 software and the Mc Nemar and paired-samples t test for data analysis. Results: Study findings revealed that nurses’ mean score on the Safe Practice Evaluation Checklist increased significantly from 11.6 (2.7 to 17.0 (1.8 (P < 0.001. Conclusion: using a standard handover protocol for communicating patient’s needs and information improves nurses’ safe practice in the area of basic nursing care.

Handling of bulk solids theory and practice

CERN Document Server

Shamlou, P A

1990-01-01

Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-mater

Enclosure for handling high activity materials abstract

International Nuclear Information System (INIS)

Jimeno de Osso, F.; Dominguez Rodriguez, G.; Cruz Castillo, F. de la; Rodriguez Esteban, A.

1977-01-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With that purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. A description is given of those aspects that may be of interest to people working in this field. (author) [es

Food safety knowledge and practice among child caregivers in Ijebu ...

African Journals Online (AJOL)

6.7±1.3), poor safety knowledge of changing baby clothing (6.5±1.0), safe food handling and preparation 4.6±0.6, cross contamination and hand washing techniques (4.2±0). They also had poor food safety practice on hand washing practice ...

Safe use of nanomaterials

CERN Multimedia

2013-01-01

The use of nanomaterials  is on the increase worldwide, including at CERN. The HSE Unit has established a safety guideline to inform you of the main requirements for the safe handling and disposal of nanomaterials at CERN.   A risk assessment tool has also been developed which guides the user through the process of evaluating the risk for his or her activity. Based on the calculated risk level, the tool provides a list of recommended control measures.   We would therefore like to draw your attention to: Safety Guideline C-0-0-5 - Safe handling and disposal of nanomaterials; and Safety Form C-0-0-2 - Nanomaterial Risk Assessment   You can consult all of CERN’s safety rules and guidelines here. Please contact the HSE Unit for any questions you may have.   The HSE Unit

Compilation of Requirements for Safe Handling of Fluorine and Fluorine-Containing Products of Uranium Hexafluoride Conversion

Energy Technology Data Exchange (ETDEWEB)

Ferrada, J.J.

2000-04-03

Public Law (PL) 105-204 requires the U.S. Department of Energy to develop a plan for inclusion in the fiscal year 2000 budget for conversion of the Department's stockpile of depleted uranium hexafluoride (DUF{sub 6}) to a more stable form over an extended period. The conversion process into a more stable form will produce fluorine compounds (e.g., elemental fluorine or hydrofluoric acid) that need to be handled safely. This document compiles the requirements necessary to handle these materials within health and safety standards, which may apply in order to ensure protection of the environment and the safety and health of workers and the public. Fluorine is a pale-yellow gas with a pungent, irritating odor. It is the most reactive nonmetal and will react vigorously with most oxidizable substances at room temperature, frequently with ignition. Fluorine is a severe irritant of the eyes, mucous membranes, skin, and lungs. In humans, the inhalation of high concentrations causes laryngeal spasm and broncospasms, followed by the delayed onset of pulmonary edema. At sublethal levels, severe local irritation and laryngeal spasm will preclude voluntary exposure to high concentrations, unless the individual is trapped or incapacitated. A blast of fluorine gas on the shaved skin of a rabbit causes a second degree burn. Lower concentrations cause severe burns of insidious onset, resulting in ulceration, similar to the effects produced by hydrogen fluoride. Hydrofluoric acid is a colorless, fuming liquid or gas with a pungent odor. It is soluble in water with release of heat. Ingestion of an estimated 1.5 grams produced sudden death without gross pathological damage. Repeated ingestion of small amounts resulted in moderately advanced hardening of the bones. Contact of skin with anhydrous liquid produces severe burns. Inhalation of AHA or aqueous hydrofluoric acid mist or vapors can cause severe respiratory tract irritation that may be fatal. Based on the extreme chemical

Adoption of Sun Safe Work Place Practices by Local Governments

Science.gov (United States)

Wallis, Allan; Andersen, Peter A.; Buller, David B.; Walkosz, Barbara; Lui, Lucia; Buller, Mary; Scott, Michael D.; Jenkins, Rob

2014-01-01

Context Outdoor workers are especially susceptible to skin cancer, the most common, but also one of the most preventable, forms of cancer. Colorado, the location of the study, has the second highest rate of skin cancer deaths in the nation. Objective Local government managers in Colorado—in municipalities, counties and special districts—were surveyed in order to ascertain the extent to which they engage in formal (written) and informal practices to protect their outdoor workers against excessive exposure to sun. Design The survey consisted of 51 question assessing awareness of formal or informal practices for sun protection of outdoor workers. An index of practices--the study's dependent variable--was created that was comprised or practices such as providing employees free or reduced-cost sunscreen, wide-brimmed hats, sunglasses, long-sleeved work shirts, long work pants, and temporary or permanent outdoor shade shelters. Proscriptive policies, such as restricting the use of broad brimmed hats, were subtracted from the index. Surveys were completed by 825 administrators representing 98 jurisdictions. Responses from administrators in the same jurisdiction were averaged. Results Over 40 percent of responding jurisdictions indicated that they engaged in informal sun safety practices. Tests conducted to determine what variables might account for the adoption of these sun protection practices found that the degree to which a community could be regarded as cosmopolite and as having an individualistic political culture were significant predictors. Type of government was also significant. Although, higher community income was a significant predictor, neither local government budget nor size was significant. Conclusions The adoption of sun safe practices bears low costs with potentially high returns. Findings from this study suggest that awareness campaigns might most effectively target cosmopolite communities, but that the greatest impact might be achieved by targeting

The safe home project.

Science.gov (United States)

Arphorn, Sara; Jiraniratisai, Sopaphan; Rungtakul, Rungsri; Phutta, Nikom

2011-12-01

The Thai Health Promotion Foundation supported the Improvement of Quality of Life of Informal Workers project in Ban Luang District, Amphur Photaram, Ratchaburi Province. There were many informal workers in Ban Luang District. Sweet-crispy fish producers in Ban Luang were the largest group among the sweet-crispy fish producers in Thailand. This project was aimed at improving living and working conditions of informal workers, with a focus on the sweet-crispy fish group. Good practices of improved living and working conditions were used to help informal workers build safe, healthy and productive work environments. These informal workers often worked in substandard conditions and were exposed to various hazards in the working area. These hazards included risk of exposure to hot work environment, ergonomics-related injuries, chemical hazards, electrical hazards etc. Ergonomics problems were commonly in the sweet-crispy fish group. Unnatural postures such as prolonged sitting were performed dominantly. One hundred and fifty informal workers participated in this project. Occupational health volunteers were selected to encourage occupational health and safety in four groups of informal workers in 2009. The occupational health volunteers trained in 2008 were farmers, beauty salon workers and doll makers. The occupational health and safety knowledge is extended to a new informal worker group: sweet-crispy fish producer, in 2009. The occupational health and safety training for sweet-crispy fish group is conducted by occupational health volunteers. The occupational health volunteers increased their skills and knowledge assist in to make safe home and safe community through participatory oriented training. The improvement of living and working condition is conducted by using a modified WISH, Work Improvement for Safe Home, checklist. The plans of improvement were recorded. The informal workers showed improvement mostly on material handling and storage. The safe uses and safe

Safe Operation of Nuclear Power Plants. Code of Practice and Technical Appendices

International Nuclear Information System (INIS)

1969-01-01

This book is in two parts. The first is a Code of Practice for the Safe Operation of Nuclear Power Plants and the second part is a compilation of technical appendices. Its object is to give information and illustrative examples that would be helpful in implementing the Code of Practice. This second part, although published under the same cover, is not part of the Code. Safe operation of a nuclear power plant postulates suitable siting and proper design, construction and management of the plant. Under the present Code of Practice for the Safe Operation of Nuclear Power Plants, those intending to operate the plant are recommended to prepare documentation which would deal with its operation and include safety analyses. The documentation in question would be reviewed by a regulatory body independent of the operating organization; operation would be authorized on the understanding that it would comply with limits and conditions designed to ensure safety. The Code may be subject to revision in the light of experience. The Appendices provide additional information together with some examples relating to certain topics dealt with in the Code; it must be emphasized that they are included as examples for information only and are not part of any recommendation. Purpose and scope: The recommendations in the Code are designed to protect the general public and the operating personnel from radiation hazards, and the Code forms part of the Agency's Safety Standards. The Code, which should be used in conjunction with the Agency's other Safety Standards, provides guidance and information to persons and authorities responsible for the operation of stationary nuclear power plants whose main function is the generation of thermal, mechanical or electrical power; it is not intended to apply to reactors used solely for experimental or research purposes. It sets forth minimum requirements which, it is believed, in the light of experience, must be met in order to achieve safe operation of a

Observation of High School Students' Food Handling Behaviors: Do They Improve following a Food Safety Education Intervention?

Science.gov (United States)

Diplock, Kenneth J; Dubin, Joel A; Leatherdale, Scott T; Hammond, David; Jones-Bitton, Andria; Majowicz, Shannon E

2018-06-01

Youth are a key audience for food safety education. They often engage in risky food handling behaviors, prepare food for others, and have limited experience and knowledge of safe food handling practices. Our goal was to investigate the effectiveness of an existing food handler training program for improving safe food handling behaviors among high school students in Ontario, Canada. However, because no schools agreed to provide control groups, we evaluated whether behaviors changed following delivery of the intervention program and whether changes were sustained over the school term. We measured 32 food safety behaviors, before the intervention and at 2-week and 3-month follow-up evaluations by in-person observations of students ( n = 119) enrolled in grade 10 and 12 Food and Nutrition classes ( n = 8) and who individually prepared recipes. We examined within-student changes in behaviors across the three time points, using mixed effects regression models to model trends in the total food handling score (of a possible 32 behaviors) and subscores for "clean" (17 behaviors), "separate" (14 behaviors), and "cook" (1 behavior), adjusting for student characteristics. At baseline, students ( n = 108) averaged 49.1% (15.7 of 32 behaviors; standard deviation = 5.8) correct food handling behaviors, and only 5.5% (6) of the 108 students used a food thermometer to check the doneness of the chicken (the "cook" behavior). All four behavior score types increased significantly ∼2 weeks postintervention and remained unchanged ∼3 months later. Student characteristics (e.g., having taken a prior food handling course) were not significant predictors of the total number of correctly performed food handling behaviors or of the "clean" or "separate" behaviors, working or volunteering in a food service establishment was the only characteristic significantly associated with food thermometer use (i.e., "cook"). Despite the significant increase in correct behaviors, students continued to

Equipment for the handling of thorium materials

International Nuclear Information System (INIS)

Heisler, S.W. Jr.; Mihalovich, G.S.

1988-01-01

The Feed Materials Production Center (FMPC) is the United States Department of Energy's storage facility for thorium. FMPC thorium handling and overpacking projects ensure the continued safe handling and storage of the thorium inventory until final disposition of the materials is determined and implemented. The handling and overpacking of the thorium materials requires the design of a system that utilizes remote handling and overpacking equipment not currently utilized at the FMPC in the handling of uranium materials. The use of remote equipment significantly reduces radiation exposure to personnel during the handling and overpacking efforts. The design system combines existing technologies from the nuclear industry, the materials processing and handling industry and the mining industry. The designed system consists of a modified fork lift truck for the transport of thorium containers, automated equipment for material identification and inventory control, and remote handling and overpacking equipment for material identification and inventory control, and remote handling and overpacking equipment for repackaging of the thorium materials

Safe clinical practice for patients hospitalised in a suicidal crisis: a study protocol for a qualitative case study.

Science.gov (United States)

Berg, Siv Hilde; Rørtveit, Kristine; Walby, Fredrik A; Aase, Karina

2017-01-27

Suicide prevention in psychiatric care is arguably complex and incompletely understood as a patient safety issue. A resilient healthcare approach provides perspectives through which to understand this complexity by understanding everyday clinical practice. By including suicidal patients and healthcare professionals as sources of knowledge, a deeper understanding of what constitutes safe clinical practice can be achieved. This planned study aims to adopt the perspective of resilient healthcare to provide a deeper understanding of safe clinical practice for suicidal patients in psychiatric inpatient care. It will describe the experienced components and conditions of safe clinical practice and the experienced practice of patient safety. The study will apply a descriptive case study approach consisting of qualitative semistructured interviews and focus groups. The data sources are hospitalised patients in a suicidal crisis and healthcare professionals in clinical practice. This study was approved by the Regional Ethics Committee (2016/34). The results will be disseminated through scientific articles, a PhD dissertation, and national and international conferences. These findings can generate knowledge to be integrated into the practice of safety for suicidal inpatients in Norway and to improve the feasibility of patient safety measures. Theoretical generalisations can be drawn regarding safe clinical practice by taking into account the experiences of patients and healthcare professionals. Thus, this study can inform the conceptual development of safe clinical practice for suicidal patients. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Clinical Practice Guideline: Safe Medication Use in the ICU.

Science.gov (United States)

Kane-Gill, Sandra L; Dasta, Joseph F; Buckley, Mitchell S; Devabhakthuni, Sandeep; Liu, Michael; Cohen, Henry; George, Elisabeth L; Pohlman, Anne S; Agarwal, Swati; Henneman, Elizabeth A; Bejian, Sharon M; Berenholtz, Sean M; Pepin, Jodie L; Scanlon, Mathew C; Smith, Brian S

2017-09-01

To provide ICU clinicians with evidence-based guidance on safe medication use practices for the critically ill. PubMed, Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials, CINAHL, Scopus, and ISI Web of Science for relevant material to December 2015. Based on three key components: 1) environment and patients, 2) the medication use process, and 3) the patient safety surveillance system. The committee collectively developed Population, Intervention, Comparator, Outcome questions and quality of evidence statements pertaining to medication errors and adverse drug events addressing the key components. A total of 34 Population, Intervention, Comparator, Outcome questions, five quality of evidence statements, and one commentary on disclosure was developed. Subcommittee members were assigned selected Population, Intervention, Comparator, Outcome questions or quality of evidence statements. Subcommittee members completed their Grading of Recommendations Assessment, Development, and Evaluation of the question with his/her quality of evidence assessment and proposed strength of recommendation, then the draft was reviewed by the relevant subcommittee. The subcommittee collectively reviewed the evidence profiles for each question they developed. After the draft was discussed and approved by the entire committee, then the document was circulated among all members for voting on the quality of evidence and strength of recommendation. The committee followed the principles of the Grading of Recommendations Assessment, Development, and Evaluation system to determine quality of evidence and strength of recommendations. This guideline evaluates the ICU environment as a risk for medication-related events and the environmental changes that are possible to improve safe medication use. Prevention strategies for medication-related events are reviewed by medication use process node (prescribing, distribution, administration, monitoring). Detailed

A multi-component patient-handling intervention improves attitudes and behaviors for safe patient handling and reduces aggression experienced by nursing staff

DEFF Research Database (Denmark)

Risør, Bettina Wulff; Casper, Sven Dalgas; Andersen, Lars L.

2017-01-01

This study evaluated an intervention for patient-handling equipment aimed to improve nursing staffs' use of patient handling equipment and improve their general health, reduce musculoskeletal problems, aggressive episodes, days of absence and work-related accidents. As a controlled before......-after study, questionnaire data were collected at baseline and 12-month follow-up among nursing staff at intervention and control wards at two hospitals. At 12-month follow-up, the intervention group had more positive attitudes towards patient-handling equipment and increased use of specific patient......-handling equipment. In addition, a lower proportion of nursing staff in the intervention group had experienced physically aggressive episodes. No significant change was observed in general health status, musculoskeletal problems, days of absence or work-related accidents. The intervention resulted in more positive...

Food safety knowledge, practices and beliefs of primary food preparers in families with young children. A mixed methods study.

Science.gov (United States)

Meysenburg, Rebecca; Albrecht, Julie A; Litchfield, Ruth; Ritter-Gooder, Paula K

2014-02-01

Food preparers in families with young children are responsible for safe food preparation and handling to prevent foodborne illness. To explore the food safety perceptions, beliefs, and practices of primary food preparers in families with children 10 years of age and younger, a mixed methods convergent parallel design and constructs of the Health Belief Model were used. A random sampling of 72 primary food handlers (36.2±8.6 years of age, 88% female) within young families in urban and rural areas of two Midwestern states completed a knowledge survey and participated in ten focus groups. Quantitative data were analyzed using SPSS. Transcribed interviews were analyzed for codes and common themes. Forty-four percent scored less than the average knowledge score of 73%. Participants believe children are susceptible to foodborne illness but perceive its severity to be low with gastrointestinal discomfort as the primary outcome. Using safe food handling practices and avoiding inconveniences were benefits of preventing foodborne illness. Childcare duties, time and knowledge were barriers to practicing food safety. Confidence in preventing foodborne illness was high, especially when personal control over food handling is present. The low knowledge scores and reported practices revealed a false sense of confidence despite parental concern to protect their child from harm. Food safety messages that emphasize the susceptibility and severity of foodborne illness in children are needed to reach this audience for adoption of safe food handling practices. Published by Elsevier Ltd.

Food Handling Behaviors Observed in Consumers When Cooking Poultry and Eggs.

Science.gov (United States)

Maughan, Curtis; Chambers, Edgar; Godwin, Sandria; Chambers, Delores; Cates, Sheryl; Koppel, Kadri

2016-06-01

Previous research has shown that many consumers do not follow recommended food safety practices for cooking poultry and eggs, which can lead to exposure to Salmonella and Campylobacter. Past research has been done primarily through surveys and interviews, rather than observations. The objective of this project was to determine through observations whether consumers follow food safety guidelines. Consumers (n = 101) divided among three locations (Manhattan, KS; Kansas City, MO area; and Nashville, TN) were observed as they prepared a baked whole chicken breast, a pan-fried ground turkey patty, a fried egg, and scrambled eggs. The end point temperature for the cooked products was taken (outside the view of consumers) within 30 s after the consumers indicated they were finished cooking. Thermometer use while cooking was low, although marginally higher than that of some previous studies: only 37% of consumers used a thermometer for chicken breasts and only 22% for turkey patties. No one used a thermometer for fried or scrambled eggs. Only 77% of the chicken and 69% of the turkey was cooked to a safe temperature (165°F [74°C]), and 77% of scrambled and 49% of fried eggs reached a safe temperature (160°F [71°C]). Safe hand washing was noted in only 40% of respondents after handling the chicken breast and 44% after handling the ground turkey patty. This value decreased to 15% after handling raw eggs for fried eggs and to 17% for scrambled eggs. These results show that there is a high prevalence of unsafe behaviors (undercooking and poor hand washing technique) when cooking poultry and eggs and a great need for improvement in consumer behavior with poultry and eggs.

Astute and safe use of topical ocular corticosteroids in general practice

African Journals Online (AJOL)

Astute and safe use of topical ocular corticosteroids in general practice: ... is often contact-lens associated) and fungal keratitis. ... for 1 week in acute follicular conjunctivitis presumed to be ... Steroidal anti-inflammatory drugs. In: Rhee DJ. Ophthalmic Drug Guide. London: ... Cataract – by performing a red reflex test. • Herpes ...

Minor corral changes and adoption of good handling practices can improve the behavior and reduce cortisol release in Nellore cows.

Science.gov (United States)

Lima, Maria Lúcia Pereira; Negrão, João Alberto; de Paz, Claudia Cristina Paro; Grandin, Temple

2018-03-01

Inadequate corral facilities and improper handling are major causes of stress in beef cattle. The purpose of this study was to evaluate the effects of minor changes in the corral and adoption of good handling practices on the behavior, cortisol release, and time spent taking blood samples in Nellore cows. Minor corral changes included obstructing the cow's vision when the handler walked deep into the animal's flight zone and the elimination of bright objects, color contrasts, puddles, shadows, and darkness in the corral. Handling was improved by eliminating dogs, electric goads (prods), and yelling, as well as adopting a calm behavior. A total of 141 Nellore cows from two typical extensive livestock farms were studied. The cows were evaluated individually before and after the corral changes. Blood samples were collected in the restraint device for cortisol measurement. The minor corral changes and the adoption of good handling practices result in better results for all variables studied. The results showed differences in the interactions between treatment and ranch for chute score (P = 0.0091) and exit score (P good handling practices were effective in improving cow behavior in the chute and in reducing exit velocity, cortisol released, and the time spent taking blood samples.

The use of collaboration to implement evidence-based safe practices.

Science.gov (United States)

Clarke, John R

2013-12-01

The Pennsylvania Patient Safety Authority receives over 235,000 reports of medical error per year. Near miss and serious event reports of common and interesting problems are analysed to identify best practices for preventing harmful errors. Dissemination of this evidence-based information in the peer-reviewed Pennsylvania Patient Safety Advisory and presentations to medical staffs are not sufficient for adoption of best practices. Adoption of best practices has required working with institutions to identify local barriers to and incentives for adopting best practices and redesigning the delivery system to make desired behaviour easy and undesirable behaviour more difficult. Collaborations, where institutions can learn from the experiences of others, have show decreases in harmful events. The Pennsylvania Program to Prevent Wrong-Site Surgery is used as an example. Two collaborations to prevent wrong-site surgery have been completed, one with 30 institutions in eastern Pennsylvania and one with 19 in western Pennsylvania. The first collaboration achieved a 73% decrease in the rolling average of wrong-site events over 18 months. The second collaboration experienced no wrong-site operating room procedures over more than one year. Significance for public healthSince the Institute of Medicine's To Err is Human identified medical errors as a major cause of death, the public has been interested in the recommendations for reporting of medical errors and implementing safe systems for the delivery of healthcare. The Commonwealth of Pennsylvania has followed those recommendations and found that an essential intermediate step between analysing reports and implementing safe systems is collaborative learning among healthcare institutions. The experience in Pennsylvania should be useful to other public organizations wishing to improve safety.

Fuel handling machine and auxiliary systems for a fuel handling cell

International Nuclear Information System (INIS)

Suikki, M.

2013-10-01

repair measures. For this reason, the fuel handling machine is designed in such a way that a single fault does not bring about such a situation. The fuel handling machine operation was subjected to a risk analysis. The fault conditions offer a possibility of safe situation defusing measures and the fuel handling cell tightness guarantees that no radioactive releases escape outside the facility. As the analysis was being conducted, improvement proposals were discovered regarding certain functions of the fuel handling cell. The total cost estimate, without value added tax, for manufacturing the system amounted to 3 980 000 euros. (orig.)

Fuel handling machine and auxiliary systems for a fuel handling cell

Energy Technology Data Exchange (ETDEWEB)

Suikki, M. [Optimik Oy, Turku (Finland)

2013-10-15

repair measures. For this reason, the fuel handling machine is designed in such a way that a single fault does not bring about such a situation. The fuel handling machine operation was subjected to a risk analysis. The fault conditions offer a possibility of safe situation defusing measures and the fuel handling cell tightness guarantees that no radioactive releases escape outside the facility. As the analysis was being conducted, improvement proposals were discovered regarding certain functions of the fuel handling cell. The total cost estimate, without value added tax, for manufacturing the system amounted to 3 980 000 euros. (orig.)

Microbiological Safety and Food Handling Practices of Seed Sprout Products in the Australian State of Victoria.

Science.gov (United States)

Symes, Sally; Goldsmith, Paul; Haines, Heather

2015-07-01

Seed sprouts have been implicated as vehicles for numerous foodborne outbreaks worldwide. Seed sprouts pose a unique food safety concern because of the ease of microbiological seed contamination, the inherent ability of the sprouting process to support microbial growth, and their consumption either raw or lightly cooked. To examine seed sprout safety in the Australian state of Victoria, a survey was conducted to detect specific microbes in seed sprout samples and to investigate food handling practices relating to seed sprouts. A total of 298 seed sprout samples were collected from across 33 local council areas. Escherichia coli was detected in 14.8%, Listeria spp. in 12.3%, and Listeria monocytogenes in 1.3% of samples analyzed. Salmonella spp. were not detected in any of the samples. A range of seed sprout handling practices were identified as potential food safety issues in some food businesses, including temperature control, washing practices, length of storage, and storage in proximity to unpackaged ready-to-eat potentially hazardous foods.

Interaction between HIV awareness, knowledge, safe sex practice and HIV prevalence: evidence from Botswana.

Science.gov (United States)

Ray, Ranjan; Sinha, Kompal

2012-05-01

This paper makes methodological and empirical contributions to the study of HIV in the context of Botswana, a country with high HIV prevalence. Comparable evidence is presented from India to put the Botswana results in perspective. The results point to the strong role played by affluence and education in increasing HIV knowledge, promoting safe sex and reducing HIV prevalence. The study presents African evidence on the role played by the empowerment of women in promoting safe sex practices such as condom use. The lack of significant association between HIV prevalence and safe sex practice points to the danger of HIV-infected individuals spreading the disease through multiple sex partners and unprotected sex. This danger is underlined by the finding that females with multiple sex partners are at higher risk of being infected with HIV. These results take on special policy significance in the context of Botswana, where the issue of multiple sex partners has not been adequately addressed in the programme to contain the spread of HIV.

Regulatory Framework and Current Practices of the Radioactive Material Safe and Secure Transport in Albania

International Nuclear Information System (INIS)

Dollani, K.; Grillo, B.; Telhaj, E.

2016-01-01

Attempts for the establishing of a safe and secure radioactive material transport in Albania began a decade ago with formulation of the different regulation in the field of safe and secure handling of the radioactive materials. In 2004 a special regulation for the safe transport of radioactive material was prepared and approved by the National Radiation Protection Commission). This regulation has been based in the IAEA standards for the radioactive material transport and was reviewed periodically. The last regulation of the radioactive material transport was approved by Albanian government through a governmental ordinance. The transport of the radioactive material in Albania is performed by licensed subjects, which fulfill all requirements of the mentioned governmental ordinance. Based in the existing regulation, for each transport of radioactive material, a special permission is issued by NRPC. The issuing of permission allows competent authority to provide necessary information on transport regularity and to have under survey all transports of the radioactive material carried out inside the country. Last year were issued more than 80 permissions for the transport of the different types and categories of the radioactive sources. (author)

The role of informal dimensions of safety in high-volume organisational routines: an ethnographic study of test results handling in UK general practice.

Science.gov (United States)

Grant, Suzanne; Checkland, Katherine; Bowie, Paul; Guthrie, Bruce

2017-04-27

The handling of laboratory, imaging and other test results in UK general practice is a high-volume organisational routine that is both complex and high risk. Previous research in this area has focused on errors and harm, but a complementary approach is to better understand how safety is achieved in everyday practice. This paper ethnographically examines the role of informal dimensions of test results handling routines in the achievement of safety in UK general practice and how these findings can best be developed for wider application by policymakers and practitioners. Non-participant observation was conducted of high-volume organisational routines across eight UK general practices with diverse organisational characteristics. Sixty-two semi-structured interviews were also conducted with the key practice staff alongside the analysis of relevant documents. While formal results handling routines were described similarly across the eight study practices, the everyday structure of how the routine should be enacted in practice was informally understood. Results handling safety took a range of local forms depending on how different aspects of safety were prioritised, with practices varying in terms of how they balanced thoroughness (i.e. ensuring the high-quality management of results by the most appropriate clinician) and efficiency (i.e. timely management of results) depending on a range of factors (e.g. practice history, team composition). Each approach adopted created its own potential risks, with demands for thoroughness reducing productivity and demands for efficiency reducing handling quality. Irrespective of the practice-level approach adopted, staff also regularly varied what they did for individual patients depending on the specific context (e.g. type of result, patient circumstances). General practices variably prioritised a legitimate range of results handling safety processes and outcomes, each with differing strengths and trade-offs. Future safety

Safety handling of beryllium for fusion technology R and D

International Nuclear Information System (INIS)

Yoshida, Hiroshi; Okamoto, Makoto; Terai, Takayuki; Odawara, Osamu; Ashibe, Kusuo; Ohara, Atsushi.

1992-07-01

Feasibility of beryllium use as a blanket neutron multiplier, first wall and plasma facing material has been studied for the D-T burning experiment reactors such as ITER. Various experimental work of beryllium and its compounds will be performed under the conditions of high temperature and high energy particle exposure simulating fusion reactor conditions. Beryllium is known as a hazardous substance and its handling has been carefully controlled by various health and safe guidances and/or regulations in many countries. Japanese regulations for hazardous substance provide various guidelines on beryllium for the protection of industrial workers and environment. This report was prepared for the safe handling of beryllium in a laboratory scale experiments for fusion technology R and D such as blanket development. Major items in this report are; (1) Brief review of guidances and regulations in USA, UK and Japan. (2) Safe handling and administration manuals at beryllium facilities in INEL, LANL and JET. (3) Conceptual design study of beryllium handling facility for small to mid-scale blanket R and D. (4) Data on beryllium toxicity, example of clinical diagnosis of beryllium disease, and environmental occurence of beryllium. (5) Personnel protection tools of Japanese Industrial Standard for hazardous substance. (author) 61 refs

Evaluation of the Implementation of Good Handling Practices in Food and Beverage Areas of Hotels.

Science.gov (United States)

Serafim, A L; Hecktheuer, L H R; Stangarlin-Fiori, L; Medeiros, L B; Martello, L; Machado, C E

2015-11-01

Because of the major international-level events that have recently been held in Brazil, concerns about the sensory and hygienic-sanitary conditions of food have increased. The objective of this study was to evaluate the implementation of good handling practices in food and beverage areas of hotels, with and without outsourced professional intervention. We evaluated 19 food and beverage areas in hotels in Porto Alegre, Rio do Sul, Brazil, using a checklist that was developed by a municipal surveillance team based on existing laws for good handling practices. The evaluation was done by a skilled professional in the food safety area on two occasions, at the beginning of the study (January to May 2013) and at the end (July to November 2014), and the establishments were classified as good, regular, or poor. After the baseline evaluation, an action plan listing the noncompliance found at each location was given to those responsible for the establishments, and a period of 1 year 6 months was stipulated for improvements to be made. In the repeat evaluation, those responsible for the establishments were asked whether they had hired an outsourced professional to assist them in the improvements. The hotels showed improvement during the repeat evaluation, but a significant increase in the percentage of overall adequacy was seen only in the food and beverages areas of the 12 hotels that used the intervention of an outsourced professional. The better percentage of adequacy in establishments with outsourced professional intervention underlines the importance of an external and impartial view of routine activities in the implementation of good handling practices.

12 CFR 1.5 - Safe and sound banking practices; credit information required.

Science.gov (United States)

2010-01-01

... interest rate, credit, liquidity, price, foreign exchange, transaction, compliance, strategic, and... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Safe and sound banking practices; credit information required. 1.5 Section 1.5 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE...

School Foodservice Employees' Perceptions of Practice: Differences by Generational Age and Hours Worked

Science.gov (United States)

Strohbehn, Catherine; Jun, Jinhyun; Arendt, Susan

2014-01-01

Purpose/Objectives: This study investigated the influences of school foodservice employees' age and average number of hours worked per week on perceived safe food handling practices, barriers, and motivators. Methods: A bilingual survey (English and Spanish) was developed to assess reported food safety practices, barriers, and motivators to…

Safeness of radiological machinery

International Nuclear Information System (INIS)

Yokoyama, Shun

1979-01-01

The human factors affecting the safeness of radiological machinery, which are often very big and complicated machines, are described from the stand point of handling. 20 to 50% of the troubles on equipments seem to be caused by men. This percentage will become even higher in highly developed equipments. Human factors have a great influence on the safeness of radiological equipments. As the human factors, there are sensory factors and knowledge factors as well as psychological factors, and the combination of these factors causes mishandling and danger. Medical services at present are divided in various areas, and consist of the teamwork of the people in various professions. Good human relationship, education and control are highly required to secure the safeness. (Kobatake, H.)

Safe Handling of Cytotoxic Drugs and Risks of Occupational Exposure to Nursing Staffs

Directory of Open Access Journals (Sweden)

Somayeh Hanafi

2016-05-01

Full Text Available Background: Inherent toxicity of cytotoxic drugs is the basis for their potential adverse risks from occupational exposure to the nursing staff. In Iran, chemotherapy regimens are prescribed and administered according to the world updated protocols. But little is done regarding the protective standards in this field.Methods: An observational cross-sectional survey was conducted among nurses who work in three tertiary care teaching hospitals in Tehran, Iran in 2012. All participants worked in one of the hospital wards handling cytotoxic drugs (preparation and administration. A questionnaire was used for interviewing all subjects, and observing them preparing and administering the drugs. We examined all adverse effects associated with handling of antineoplastic drugs.Results: Totally 270 adverse reactions were reported. The most frequently reported adverse effects included headache and vertigo (40 cases, hair loss (36 cases, skin rashes and itching (31 cases, and burning sensation in eyes (31 cases. In all hospital wards, the standards were met in not more than 50% of the items.Conclusion: Monitoring the personnel who are directly involved in handling of cytotoxic drugs is of great importance. Furthermore, educating the personnel in the field of standards of cytotoxic drugs handling could increase the nursing staff’s knowledge regarding these drugs’ adverse reactions.

A practical guide to handling laser diode beams

CERN Document Server

Sun, Haiyin

2015-01-01

This book offers the reader a practical guide to the control and characterization of laser diode beams.  Laser diodes are the most widely used lasers, accounting for 50% of the global laser market.  Correct handling of laser diode beams is the key to the successful use of laser diodes, and this requires an in-depth understanding of their unique properties. Following a short introduction to the working principles of laser diodes, the book describes the basics of laser diode beams and beam propagation, including Zemax modeling of a Gaussian beam propagating through a lens.  The core of the book is concerned with laser diode beam manipulations: collimating and focusing, circularization and astigmatism correction, coupling into a single mode optical fiber, diffractive optics and beam shaping, and manipulation of multi transverse mode beams.  The final chapter of the book covers beam characterization methods, describing the measurement of spatial and spectral properties, including wavelength and linewidth meas...

National Athletic Trainers' Association position statement: safe weight loss and maintenance practices in sport and exercise.

Science.gov (United States)

Turocy, Paula Sammarone; DePalma, Bernard F; Horswill, Craig A; Laquale, Kathleen M; Martin, Thomas J; Perry, Arlette C; Somova, Marla J; Utter, Alan C

2011-01-01

To present athletic trainers with recommendations for safe weight loss and weight maintenance practices for athletes and active clients and to provide athletes, clients, coaches, and parents with safe guidelines that will allow athletes and clients to achieve and maintain weight and body composition goals. Unsafe weight management practices can compromise athletic performance and negatively affect health. Athletes and clients often attempt to lose weight by not eating, limiting caloric or specific nutrients from the diet, engaging in pathogenic weight control behaviors, and restricting fluids. These people often respond to pressures of the sport or activity, coaches, peers, or parents by adopting negative body images and unsafe practices to maintain an ideal body composition for the activity. We provide athletic trainers with recommendations for safe weight loss and weight maintenance in sport and exercise. Although safe weight gain is also a concern for athletic trainers and their athletes and clients, that topic is outside the scope of this position statement. Athletic trainers are often the source of nutrition information for athletes and clients; therefore, they must have knowledge of proper nutrition, weight management practices, and methods to change body composition. Body composition assessments should be done in the most scientifically appropriate manner possible. Reasonable and individualized weight and body composition goals should be identified by appropriately trained health care personnel (eg, athletic trainers, registered dietitians, physicians). In keeping with the American Dietetics Association (ADA) preferred nomenclature, this document uses the terms registered dietitian or dietician when referring to a food and nutrition expert who has met the academic and professional requirements specified by the ADA's Commission on Accreditation for Dietetics Education. In some cases, a registered nutritionist may have equivalent credentials and be the

Guidance notes : safe practice for the use of nuclear density meters

International Nuclear Information System (INIS)

2000-06-01

These 'Guidance notes' have been written to provide information for owners and users on the safe care and use of instruments containing radioactive materials used for the measurement of moisture content and/or density of materials. They give practical guidance on compliance with the requirements of radiation protection legislation and the 'Code of safe practice for the use of nuclear density meters, NRL C15'. Some of these instruments have been known as 'soil moisture gauges' and others as 'nuclear density meters' or just 'NDMs'. For simplicity, these 'Guidance notes' will follow industry terminology and use the term 'nuclear density meter'. Some parts of these 'Guidance notes' and of the 'Code, NRL C15' are relevant for users of asphalt gauges containing radioactive sources. These are normally laboratory bench instruments, and are not portable field instruments. Nevertheless, the radioactive sources used are similar to those used for moisture measurement and the safety implications are similar. The units of measurement of radioactivity and radiation dose are discussed in Appendix 1. Appendix 2 contains consent application forms while sample transport forms can be found in Appendix 3. (author). 10 refs

Hygienic food handling behaviours. An application of the Theory of Planned Behaviour.

Science.gov (United States)

Mullan, Barbara A; Wong, Cara L

2009-06-01

It is estimated that 5.4 million Australians get sick annually from eating contaminated food and that up to 20% of this illness results from food handling behaviour. A study was undertaken to investigate the efficacy of the Theory of Planned Behaviour (TPB) including past behaviour in predicting safe food handling intention and behaviour. One hundred and nine participants completed questionnaires regarding their attitudes, perceived behavioural control (PBC), subjective norm, intentions and past behaviour. Behaviour was measured 4 weeks later. The TPB predicted a high proportion of variance in both intentions and behaviour, and past behaviour/habit was found to be the strongest predictor of behaviour. The results of the present study suggest interventions aimed at increasing safe food handling intentions should focus on the impact of normative influences and perceptions of control over their food handling environment; whereas interventions to change actual behaviour should attempt to increase hygienic food handling as a habitual behaviour.

Safe handling and monitoring of tritium in research on nuclear fusion

International Nuclear Information System (INIS)

Yoshida, Yoshikazu; Naruse, Yuji

1978-01-01

An actual condition of technique of safety handling and monitoring of tritium in the laboratory which treated a great quantity of tritium in relation to nuclear fusion, was described. With respect to the technique of safety handling of tritium, an actual condition of the technique in the U.S.A. which had wide experience in treating a great quantity of 3 H was mainly introduced, and it was helpful to a safety measure and a reduction of tritium effluence. Glovebox, hood, and other component machinery and tools for treating 3 H were also introduced briefly. As a monitoring technique, monitoring of indoor air and air exhaust by ionization chamber-type monitor for continuous monitoring of a great quantity of gaseous tritium was mentioned. Next, monitoring of a room, the surfaces of equipments, and draining, internal exposure of the individual, and monitoring of the environment were introduced. (Kanao, N.)

Manual on safe production, transport, handling and storage of uranium hexafluoride

International Nuclear Information System (INIS)

1994-11-01

This document includes a description of the physical, chemical and radiological properties of UF 6 and related products, including information concerning their production, handling, storage and transportation and the management of the wastes which result. All the operations of UF 6 management are considered form a safety point of view. The IAEA organized a series of meetings to consider the hazards of UF 6 transport since considerable quantities of depleted, natural and enriched UF 6 are transported between nuclear fuel sites. Storage of depleted UF 6 is another important issue. Factors affecting long term storage are presented, especially site choice and cylinder corrosion. Other topics such as waste management, quality assurance and emergency preparedness which contribute to the overall safety of UF 6 handling, are included. The intention of this document is to provide analysis of the safety implications of all stages of UF 6 operations and to draw attention to specific features and properties of importance. 38 refs, figs, tabs

Assessment of the risks associated with Iodine-125 handling production sources for brachytherapy

Energy Technology Data Exchange (ETDEWEB)

Souza, Daiane C.B.; Rostelato, Maria Elisa C.; Vicente, Roberto; Zeituni, Carlos A.; Tiezzi, Rodrigo; Costa, Osvaldo L.; Souza, Carla D.; Peleias Junior, Fernando S.; Rodrigues, Bruna T.; Souza, Anderson S.; Batista, Talita Q.; Melo, Emerson R.; Camargo, Anderson R., E-mail: dcsouza@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Karam Junior, Dib, E-mail: dib.karam@usp.br [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil)

2015-07-01

In Brazil, prostate cancer is the second most frequent disease, with an estimated 68,800 new cases in 2013. This type of cancer can be treated with brachytherapy, which uses sealed sources of Iodine-125 implanted permanently in the prostate. These sources are currently imported at a high cost, making public treatment in large scale impractical. To reduce costs and to meet domestic demand, the laboratory for production of brachytherapy sources at the Nuclear and Energy Research Institute (IPEN) is currently nationalizing the production of this radioisotope. Iodine is quite volatile making the handling of its radioactive isotopes potentially dangerous. The aim of this paper is to evaluate the risks to which workers are exposed during the production and handling of the sources. The research method consisted initially of a literature review on the toxicity of iodine, intake limits, related physical risks, handling of accidents, generation of radioactive wastes, etc. The results allowed for establishing safety and radioprotection policies in order to ensure efficient and safe production in all stages and the implementation of good laboratory practices. (author)

Assessment of the risks associated with Iodine-125 handling production sources for brachytherapy

International Nuclear Information System (INIS)

Souza, Daiane C.B.; Rostelato, Maria Elisa C.; Vicente, Roberto; Zeituni, Carlos A.; Tiezzi, Rodrigo; Costa, Osvaldo L.; Souza, Carla D.; Peleias Junior, Fernando S.; Rodrigues, Bruna T.; Souza, Anderson S.; Batista, Talita Q.; Melo, Emerson R.; Camargo, Anderson R.; Karam Junior, Dib

2015-01-01

In Brazil, prostate cancer is the second most frequent disease, with an estimated 68,800 new cases in 2013. This type of cancer can be treated with brachytherapy, which uses sealed sources of Iodine-125 implanted permanently in the prostate. These sources are currently imported at a high cost, making public treatment in large scale impractical. To reduce costs and to meet domestic demand, the laboratory for production of brachytherapy sources at the Nuclear and Energy Research Institute (IPEN) is currently nationalizing the production of this radioisotope. Iodine is quite volatile making the handling of its radioactive isotopes potentially dangerous. The aim of this paper is to evaluate the risks to which workers are exposed during the production and handling of the sources. The research method consisted initially of a literature review on the toxicity of iodine, intake limits, related physical risks, handling of accidents, generation of radioactive wastes, etc. The results allowed for establishing safety and radioprotection policies in order to ensure efficient and safe production in all stages and the implementation of good laboratory practices. (author)

Survey of postharvest handling, preservation and processing ...

African Journals Online (AJOL)

Survey of postharvest handling, preservation and processing practices along the camel milk chain in Isiolo district, Kenya. ... Despite the important contribution of camel milk to food security for pastoralists in Kenya, little is known about the postharvest handling, preservation and processing practices. In this study, existing ...

Uranium hexafluoride: Safe handling, processing, and transporting: Conference proceedings

Energy Technology Data Exchange (ETDEWEB)

Strunk, W.D.; Thornton, S.G. (eds.)

1988-01-01

This conference seeks to provide a forum for the exchange of information and ideas of the safety aspects and technical issue related to the handling of uranium hexafluoride. By allowing operators, engineers, scientists, managers, educators, and others to meet and share experiences of mutual concern, the conference is also intended to provide the participants with a more complete knowledge of technical and operational issues. The topics for the papers in the proceedings are widely varied and include the results of chemical, metallurgical, mechanical, thermal, and analytical investigations, as well as the developed philosophies of operational, managerial, and regulatory guidelines. Papers have been entered individually into EDB and ERA. (LTN)

Uranium hexafluoride: Safe handling, processing, and transporting: Conference proceedings

International Nuclear Information System (INIS)

Strunk, W.D.; Thornton, S.G.

1988-01-01

This conference seeks to provide a forum for the exchange of information and ideas of the safety aspects and technical issue related to the handling of uranium hexafluoride. By allowing operators, engineers, scientists, managers, educators, and others to meet and share experiences of mutual concern, the conference is also intended to provide the participants with a more complete knowledge of technical and operational issues. The topics for the papers in the proceedings are widely varied and include the results of chemical, metallurgical, mechanical, thermal, and analytical investigations, as well as the developed philosophies of operational, managerial, and regulatory guidelines. Papers have been entered individually into EDB and ERA

Safety requirements and feedback of commonly used material handling equipment

International Nuclear Information System (INIS)

Pathak, M.K.

2009-01-01

Different types of cranes, hoists, chain pulley blocks are the most commonly used material handling equipment in industry along with attachments like chains, wire rope slings, d-shackles, etc. These equipment are used at work for transferring loads from one place to another and attachments are used for anchoring, fixing or supporting the load. Selection of the correct equipment, identification of the equipment planning of material handling operation, examination/testing of the equipment, education and training of the persons engaged in operation of the material handling equipment can reduce the risks to safety of people in workplace. Different safety systems like boom angle indicator, overload tripping device, limit switches, etc. should be available in the cranes for their safe use. Safety requirement for safe operation of material handling equipment with emphasis on different cranes and attachments particularly wire rope slings and chain slings have been brought out in this paper. An attempt has also been made to bring out common nature of deficiencies observed during regulatory inspection carried out by AERB. (author)

Review: Lyn Richards (2005. Handling Qualitative Data: A Practical Guide

Directory of Open Access Journals (Sweden)

Robert L. Miller

2006-03-01

Full Text Available Handling Qualitative Data: A Practical Guide is an introductory textbook covering all stages of qualitative research from the initial conceptualisation of a project, through data collection and analysis, to writing up. The author, Lyn RICHARDS, is a well-known developer of two key qualitative software analysis packages, NUD*IST and NVivo. While RICHARDS clearly advocates the use of qualitative analysis software, the text is "generic" and could be used in tandem with any qualitative software package. The book concentrates on practical advice about the use of software to manage and analyse qualitative data, and provides insights in these areas. The consideration of issues around team-based qualitative research is another strong point. However, due in part to its short length, the overall coverage of topics tends to be superficial. In itself, the book does not provide sufficient detailed support for a student who would like to use it as her/his main source of guidance for carrying out a qualitative research project. URN: urn:nbn:de:0114-fqs0602244

Interaction between HIV Awareness, Knowledge, Safe Sex Practice and HIV Incidence: Evidence from Botswana

OpenAIRE

Ranjan Ray; Kompal Sinha

2011-01-01

This paper makes methodological and empirical contributions to the study of HIV awareness, knowledge, incidence and safe sex practice in the context of Botswana, one of the most HIV prone countries in the world. While the focus is on Botswana, the paper presents comparable evidence from India to put the Botswana results in perspective. The results point to the strong role played by affluence and education in increasing HIV knowledge, promoting safe sex and reducing HIV incidence. The study pr...

Application of remote handling compatibility on ITER plant

International Nuclear Information System (INIS)

Sanders, S.; Rolfe, A.; Mills, S.F.; Tesini, A.

2011-01-01

The ITER plant will require fully remote maintenance during its operational life. For this to be effective, safe and efficient the plant will have to be developed in accordance with remote handling (RH) compatibility requirements. A system for ensuring RH compatibility on plant designed for Tokamaks was successfully developed and applied, inter alia, by the authors when working at the JET project. The experience gained in assuring RH compatibility of plant at JET is now being applied to RH relevant ITER plant. The methodologies required to ensure RH compatibility of plant include the standardization of common plant items, standardization of RH features, availability of common guidance on RH best practice and a protocol for design and interface review and approval. The protocol in use at ITER is covered by the ITER Remote Maintenance Management System (IRMMS) defines the processes and utilization of management controls including Plant Definition Forms (PDF), Task Definition Forms (TDFs) and RH Compatibility Assessment Forms (RHCA) and the ITER RH Code of Practice. This paper will describe specific examples where the authors have applied the methodology proven at JET to ensure remote handling compatibility on ITER plant. Examples studied are: ·ELM coils (to be installed in-vessel behind the Blanket Modules) - handling both in-vessel, in Casks and at the Hot Cell as well as fully remote installation and connection (mechanical and electrical) in-vessel. ·Neutral beam systems (in-vessel and in the NB Cell) - beam sources, cesium oven, beam line components (accessed in the NB Cell) and Duct Liner (remotely replaced from in-vessel). ·Divertor (in-vessel) - cooling pipe work and remotely operated electrical connector. The RH compatibility process can significantly affect plant design. This paper should therefore be of interest to all parties who develop ITER plant designs.

Fuel handling at Cernavoda 1 N.P.S. - commissioning and training philosophy

Energy Technology Data Exchange (ETDEWEB)

Standen, G W [AECL-Ansaldo Consortium, Cernavoda (Romania); Tiron, C; Marinescu, S [Regia Nationala de Electricitate (RENEL), Cernavoda (Romania); [Filiala Centrala Nuclearo Electrica (FCNE), Cernavoda (Romania)

1997-12-31

Efficient operation of a Candu nuclear power plant depends greatly on the reliable and safe operation of the fuel handling system. Successful commissioning of the system is obviously a key aspect of the reliability of the system and this coupled with a rigorous training programme for the fuel handling staff will ensure the system`s safe operation. This paper describes the philosophy used at Cernavoda 1 N.P.S. for the commissioning of the fuel handling systems and for the training of staff for operation and maintenance of these systems. The paper also reviews the commissioning programme, describing the milestones achieved and discussing some of the more interesting technical aspects which includes some unique Romanian input. In conclusion the paper looks at the organization of the mature fuel handling department from the operations, maintenance and technical support points of view and the long term plans for the future. (author). 1 fig.

Fuel handling at Cernavoda 1 N.P.S. - commissioning and training philosophy

International Nuclear Information System (INIS)

Standen, G.W.; Tiron, C.; Marinescu, S.

1996-01-01

Efficient operation of a Candu nuclear power plant depends greatly on the reliable and safe operation of the fuel handling system. Successful commissioning of the system is obviously a key aspect of the reliability of the system and this coupled with a rigorous training programme for the fuel handling staff will ensure the system's safe operation. This paper describes the philosophy used at Cernavoda 1 N.P.S. for the commissioning of the fuel handling systems and for the training of staff for operation and maintenance of these systems. The paper also reviews the commissioning programme, describing the milestones achieved and discussing some of the more interesting technical aspects which includes some unique Romanian input. In conclusion the paper looks at the organization of the mature fuel handling department from the operations, maintenance and technical support points of view and the long term plans for the future. (author). 1 fig

APIC position paper: Safe injection, infusion, and medication vial practices in health care.

Science.gov (United States)

Dolan, Susan A; Arias, Kathleen Meehan; Felizardo, Gwen; Barnes, Sue; Kraska, Susan; Patrick, Marcia; Bumsted, Amelia

2016-07-01

The transmission of bloodborne viruses and other microbial pathogens to patients during routine health care procedures continues to occur because of the use of improper injection, infusion, medication vial, and point-of-care testing practices by health care personnel. These unsafe practices occur in various clinical settings and result in unacceptable and devastating events for patients. This document updates the Association for Professionals in Infection Control and Epidemiology 2010 position paper on safe injection, infusion, and medication vial practices in health care. Copyright © 2016 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Survey of domestic food handling practices in New Zealand.

Science.gov (United States)

Gilbert, S E; Whyte, R; Bayne, G; Paulin, S M; Lake, R J; van der Logt, P

2007-07-15

The purpose of this survey was to obtain information on the domestic meat and poultry handling practices of New Zealanders in order to support the development of quantitative risk models, as well as providing data to underpin food safety campaigns to consumers. A sample of 1000 New Zealand residents, over 18 years of age, were randomly selected from the electoral roll and asked to participate in a national postal food safety study during 2005. Three hundred and twenty six respondents completed and returned questionnaires containing usable answers, and most of these respondents 'always' prepared the main meal within the household. The majority of meat (84.6%) and poultry (62.9%) purchased by New Zealanders was fresh (rather than frozen), and most consumers (94.4%) claimed that the time taken from food selection to reaching their home was 1 h or less. The majority (approximately 64%) of fresh meat and poultry was frozen in the home and the most favoured method of thawing was at room temperature for up to 12 h. The most common time period for storing cooked or raw meat and poultry in domestic refrigerators was up to 2 days. Most survey respondents preferred their meat and poultry to be cooked either medium or well done. The most popular cooking method for chicken was roasting or baking, while most respondents preferred to pan-fry steak/beef cuts, minced beef or sausages/hamburgers. The potential for undercooking was greatest with pan-fried steak with 19.8% of respondents preferring to consume this meat raw or rare. In answer to questions relating to food handling hygiene practices, 52.2% of respondents selected a hand washing sequence that would help prevent cross contamination. However, it was estimated that 41% and 28% of respondents would use knives and kitchen surfaces respectively in a manner that could allow cross contamination. The data in this survey are self-reported and, particularly for the hygiene questions, respondents may report an answer that they

Manual on safe production, transport, handling and storage of uranium hexafluoride

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-11-01

This document includes a description of the physical, chemical and radiological properties of UF{sub 6} and related products, including information concerning their production, handling, storage and transportation and the management of the wastes which result. All the operations of UF{sub 6} management are considered form a safety point of view. The IAEA organized a series of meetings to consider the hazards of UF{sub 6} transport since considerable quantities of depleted, natural and enriched UF{sub 6} are transported between nuclear fuel sites. Storage of depleted UF{sub 6} is another important issue. Factors affecting long term storage are presented, especially site choice and cylinder corrosion. Other topics such as waste management, quality assurance and emergency preparedness which contribute to the overall safety of UF{sub 6} handling, are included. The intention of this document is to provide analysis of the safety implications of all stages of UF{sub 6} operations and to draw attention to specific features and properties of importance. 38 refs, figs, tabs.

Predictors of low back pain in nursing home workers after implementation of a safe resident handling programme.

Science.gov (United States)

Gold, Judith E; Punnett, Laura; Gore, Rebecca J

2017-06-01

Healthcare workers have high rates of low back pain (LBP) related to handling patients. A large chain of nursing homes experienced reduced biomechanical load, compensation claims and costs following implementation of a safe resident handling programme (SRHP). The aim of this study was to examine whether LBP similarly declined and whether it was associated with relevant self-reported occupational exposures or personal health factors. Worker surveys were conducted on multiple occasions beginning with the week of first SRHP introduction (baseline). In each survey, the outcome was LBP during the prior 3 months with at least mild severity during the past week. Robust Poisson multivariable regression models were constructed to examine correlates of LBP cross-sectionally at 2 years (F3) and longitudinally at 5-6 years (F5) post-SRHP implementation among workers also in at least one prior survey. LBP prevalence declined minimally between baseline and F3. The prevalence was 37% at F3 and cumulative incidence to F5 was 22%. LBP prevalence at F3 was positively associated with combined physical exposures, psychological job demands and prior back injury, while frequent lift device usage and 'intense' aerobic exercise frequency were protective. At F5, the multivariable model included frequent lift usage at F3 (relative risk (RR) 0.39 (0.18 to 0.84)) and F5 work-family imbalance (RR=1.82 (1.12 to 2.98)). In this observational study, resident lifting device usage predicted reduced LBP in nursing home workers. Other physical and psychosocial demands of nursing home work also contributed, while frequent intense aerobic exercise appeared to reduce LBP risk. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Access to Safe Water and Personal Hygiene Practices in the Kulandia Refugee Camp (Jerusalem).

Science.gov (United States)

Issa, Mohamad; McHenry, Michael; Issa, Abdul Aziz; Blackwood, R Alexander

2015-12-22

Diarrheal illness, frequently associated with fecal-oral transmission, is one of the leading causes of death worldwide. It is commonly preventable through the implementation of safe water practices. This experiment concerns how to best implement safe water practices in a quasi-permanent refugee camp setting with limited ability for structural changes. Specifically, we explore how health promotion activities that help identify target groups for hygiene interventions can play a role in disease prevention. An anonymous survey was conducted at the United Nations Relief and Works Agency Health Clinic in the Kulandia refugee camp to assess the safe water and personal hygiene practices. Demographic and social characteristics, accessible water and personal hygiene characteristics, and gastrointestinal (GI) burden for individuals and their households were assessed. A total of 96 individuals were enrolled; 62 females and 34 males. Approximately 58% of the sample had soap available and washed hands before and after eating and when preparing food. Piped water was the main source of drinking water (62%), while 31% of our sample utilized tanker-trucks. 93% of participants had access to toilet facilities, with 86% of these facilities being private households. 55% practice extra water hygiene measures on their household drinking water source. 51.3% considered vendor cleanliness when they were buying food. 51% had received formal health education. 68.8% had been taught by their parents, but only 55.2% were teaching their children and 15.6% had consistent access to a health professional for hygiene inquiries. Individual variables and hygiene practices associated with lower rates of diarrheal illnesses included having water piped into the home, proper hand washing, adequate soap availability, proper consideration of vendor cleanliness, higher income, levels of education, health hygiene education, and having access to healthcare professions to discuss hygiene related matters. This is

Governance implications of nanomaterials companies’ inconsistent risk perceptions and safety practices

International Nuclear Information System (INIS)

Engeman, Cassandra D.; Baumgartner, Lynn; Carr, Benjamin M.; Fish, Allison M.; Meyerhofer, John D.; Satterfield, Terre A.; Holden, Patricia A.; Harthorn, Barbara Herr

2012-01-01

Current research on the nanotechnology industry indicates its downstream expansion at a rapid pace, while toxicological research and best practices for environmental health and safety are still being developed. Companies that use and/or produce engineered nanomaterials (ENMs) have enormous potential to influence safe-handling practices for ENMs across the product life cycle. Knowledge of both industry practices and leaders’ perceptions of risk is vital for understanding how companies will act to control potential environmental and health risks. This article reports results from a new international survey of nanomaterials companies in 14 countries. In this survey, company participants reported relatively high levels of uncertainty and/or perceived risk with regard to ENMs. However, these perspectives were not accompanied by expected risk-avoidant practices or preferences for regulatory oversight. A majority of companies indicated “lack of information” as a significant impediment to implementing nano-specific safety practices, but they also reported practices that were inconsistent with widely available guidance. Additionally, in the absence of safe-handling regulations, companies reported nano-specific health and safety programs that were narrow in scope. Taken together, these findings indicate that health and safety guidance is not reaching industry. While industry leaders’ reluctance toward regulation might be expected, their own reported unsafe practices and recognition of possible risks suggest a more top-down approach from regulators is needed to protect workers and the environment.

Governance implications of nanomaterials companies' inconsistent risk perceptions and safety practices

Science.gov (United States)

Engeman, Cassandra D.; Baumgartner, Lynn; Carr, Benjamin M.; Fish, Allison M.; Meyerhofer, John D.; Satterfield, Terre A.; Holden, Patricia A.; Harthorn, Barbara Herr

2012-03-01

Current research on the nanotechnology industry indicates its downstream expansion at a rapid pace, while toxicological research and best practices for environmental health and safety are still being developed. Companies that use and/or produce engineered nanomaterials (ENMs) have enormous potential to influence safe-handling practices for ENMs across the product life cycle. Knowledge of both industry practices and leaders' perceptions of risk is vital for understanding how companies will act to control potential environmental and health risks. This article reports results from a new international survey of nanomaterials companies in 14 countries. In this survey, company participants reported relatively high levels of uncertainty and/or perceived risk with regard to ENMs. However, these perspectives were not accompanied by expected risk-avoidant practices or preferences for regulatory oversight. A majority of companies indicated "lack of information" as a significant impediment to implementing nano-specific safety practices, but they also reported practices that were inconsistent with widely available guidance. Additionally, in the absence of safe-handling regulations, companies reported nano-specific health and safety programs that were narrow in scope. Taken together, these findings indicate that health and safety guidance is not reaching industry. While industry leaders' reluctance toward regulation might be expected, their own reported unsafe practices and recognition of possible risks suggest a more top-down approach from regulators is needed to protect workers and the environment.

Nurses infection prevention practices in handling injections: A case ...

African Journals Online (AJOL)

The adherence to basic infection prevention procedures/aseptic techniques in handling of injections by health workers is still a concern. The adherence to aseptic techniques in handling injections is significantly associated with the nurses to patients ratios. Therefore, it is imperative to improve nurse to patient ratio in public ...

Safe actinide disposition in molten salt reactors

International Nuclear Information System (INIS)

Gat, U.

1997-01-01

Safe molten salt reactors (MSR) can readily accommodate the burning of all fissile actinides. Only minor compromises associated with plutonium are required. The MSRs can dispose safely of actinides and long lived isotopes to result in safer and simpler waste. Disposing of actinides in MSRs does increase the source term of a safety optimized MSR. It is concluded that the burning and transmutation of actinides in MSRs can be done in a safe manner. Development is needed for the processing to handle and separate the actinides. Calculations are needed to establish the neutron economy and the fuel management. 9 refs

Calculations on safe storage and transportation of radioactive materials

Energy Technology Data Exchange (ETDEWEB)

Hathout, A M; El-Messiry, A M; Amin, E [National Center for Nuclear Safety and Radiation Control and AEA, Cairo (Egypt)

1997-12-31

In this work the safe storage and transportation of fresh fuel as a radioactive material studied. Egypt planned ET RR 2 reactor which is of relatively high power and would require adequate handling and transportation. Therefore, the present work is initiated to develop a procedure for safe handling and transportation of radioactive materials. The possibility of reducing the magnitude of radiation transmitted on the exterior of the packages is investigated. Neutron absorbers are used to decrease the neutron flux. Criticality calculations are carried out to ensure the achievement of subcriticality so that the inherent safety can be verified. The discrete ordinate transport code ANISN was used. The results show good agreement with other techniques. 2 figs., 2 tabs.

Code of safe practice for the use of x-rays in dentistry

International Nuclear Information System (INIS)

1991-06-01

The purpose of this Code of Safe Practice for the Use of X-rays in Dentistry is to provide criteria for working procedures, x-ray equipment and protective materials necessary for the use of x-rays in dental diagnosis according to currently accepted standards of safety. Conformity with this code may be taken as a primary indication of compliance with radiation protection legislation. 7 refs., 1 ill

Code of practice for the safe use of ionizing radiation in secondary schools (1986)

International Nuclear Information System (INIS)

1987-01-01

The code of practice is intended for schools and indicates the basic philosophy behind the current approach to the control of hazards associated with the use of ionizing radiation. The purpose of this code is to provide guidance on safe and proper practices in the use of radiation. It covers modes of radiation exposure, shielding, dose limits, responsibility, general rules, x-ray generators, general control of radioactive sources, sealed sources and unsealed sources

Handling e-waste in developed and developing countries: Initiatives, practices, and consequences

Energy Technology Data Exchange (ETDEWEB)

Sthiannopkao, Suthipong, E-mail: suthisuthi@gmail.com [Department of Environmental Engineering, College of Engineering, Dong-A University, 37 Nakdong-Daero 550 beon-gil Saha-gu, Busan (Korea, Republic of); Wong, Ming Hung [Croucher Institute for Environmental Sciences, Hong Kong Baptist University, Hong Kong (China)

2013-10-01

Discarded electronic goods contain a range of toxic materials requiring special handling. Developed countries have conventions, directives, and laws to regulate their disposal, most based on extended producer responsibility. Manufacturers take back items collected by retailers and local governments for safe destruction or recovery of materials. Compliance, however, is difficult to assure, and frequently runs against economic incentives. The expense of proper disposal leads to the shipment of large amounts of e-waste to China, India, Pakistan, Nigeria, and other developing countries. Shipment is often through middlemen, and under tariff classifications that make quantities difficult to assess. There, despite the intents of national regulations and hazardous waste laws, most e-waste is treated as general refuse, or crudely processed, often by burning or acid baths, with recovery of only a few materials of value. As dioxins, furans, and heavy metals are released, harm to the environment, workers, and area residents is inevitable. The faster growth of e-waste generated in the developing than in the developed world presages continued expansion of a pervasive and inexpensive informal processing sector, efficient in its own way, but inherently hazard-ridden. - Highlights: ► Much e-waste, expensive to process safely, illegally goes to developing countries. ► E-waste processing in developing countries pollutes with heavy metals and dioxins. ► Well-conceived developing world waste regulations lack enforceability. ► Crude e-waste processing cannot recover several rare materials. ► The amount of e-waste unsafely processed will continue to grow.

Handling e-waste in developed and developing countries: Initiatives, practices, and consequences

International Nuclear Information System (INIS)

Sthiannopkao, Suthipong; Wong, Ming Hung

2013-01-01

Discarded electronic goods contain a range of toxic materials requiring special handling. Developed countries have conventions, directives, and laws to regulate their disposal, most based on extended producer responsibility. Manufacturers take back items collected by retailers and local governments for safe destruction or recovery of materials. Compliance, however, is difficult to assure, and frequently runs against economic incentives. The expense of proper disposal leads to the shipment of large amounts of e-waste to China, India, Pakistan, Nigeria, and other developing countries. Shipment is often through middlemen, and under tariff classifications that make quantities difficult to assess. There, despite the intents of national regulations and hazardous waste laws, most e-waste is treated as general refuse, or crudely processed, often by burning or acid baths, with recovery of only a few materials of value. As dioxins, furans, and heavy metals are released, harm to the environment, workers, and area residents is inevitable. The faster growth of e-waste generated in the developing than in the developed world presages continued expansion of a pervasive and inexpensive informal processing sector, efficient in its own way, but inherently hazard-ridden. - Highlights: ► Much e-waste, expensive to process safely, illegally goes to developing countries. ► E-waste processing in developing countries pollutes with heavy metals and dioxins. ► Well-conceived developing world waste regulations lack enforceability. ► Crude e-waste processing cannot recover several rare materials. ► The amount of e-waste unsafely processed will continue to grow

Safe management of wastes from the mining and milling of uranium and thorium ores

International Nuclear Information System (INIS)

1987-01-01

Wastes from the mining and milling of uranium and thorium ores pose potential environmental and public health problems because of their radioactivity and chemical composition. This document consists of two parts: a Code of Practice (Part I) and a Guide to the Code (Part II). The Code sets forth the requirements for the safe and responsible handling of the wastes resulting from the mining and milling of uranium and thorium ores, while the Guide presents further guidance in the use of the Code together with some discussion of the technology and concepts involved

Remote handling of JET in-torus components. A practical experience

International Nuclear Information System (INIS)

Mills, S.; Brade, R.; Edwards, P.

2000-01-01

This paper summarises the experiences gained from the extensive handling of JET components inside the torus. The problems involved with handling components not designed to be remotely handled and the methods used to overcome them are described and discussed with specific examples from recent JET remote operations. The method employed for remotely producing structural TIG welds is explained. The problems of dextrous manipulation in an inverted attitude are discussed and the methods of amelioration are described

Remote handling for an ISIS target change

International Nuclear Information System (INIS)

Broome, T.A.; Holding, M.

1989-01-01

During 1987 two ISIS targets were changed. This document describes the main features of the remote handling aspects of the work. All the work has to be carried out using remote handling techniques. The radiation level measured on the surface of the reflector when the second target had been removed was about 800 mGy/h demonstrating that hands on operations on any part of the target reflector moderator assembly is not practical. The target changes were the first large scale operations in the Target Station Remote Handling Cell and a great deal was learned about both equipment and working practices. Some general principles emerged which are applicable to other active handling tasks on facilities like ISIS and these are discussed below. 8 figs

Effects of the European Community directive on lifting and handling practice.

Science.gov (United States)

Docker, S M

1993-07-01

The new legislation on lifting and handling requires the application of ergonomic principles to manual handling operations. A written assessment is required for all unavoidable manual handling operations which involve the risk of injury to employees. Employers are now expected to provide equipment to enable staff to avoid lifting heavy loads.

Procedures for the Safe Transport of Radioactive Material

Energy Technology Data Exchange (ETDEWEB)

Kim, Jang Lyul; Chung, K. K.; Lee, J. I.; Chang, S. Y.; Lee, T. Y

2007-11-15

This technical report describes the procedure and work responsibility along with the regulation and standard necessary for the safe transport of radioactive or contaminated materials. This report, therefore, can be effectively used to secure the public safety as well as to prevent the disastrous event which might be resulted from the transport process of radioactive materials by establishing a procedure and method on the safe packing, handling and transport of radioactive materials.

Implementing AORN recommended practices for a safe environment of care, part II.

Science.gov (United States)

Kennedy, Lynne

2014-09-01

Construction in and around a working perioperative suite is a challenge beyond merely managing traffic patterns and maintaining the sterile field. The AORN "Recommended practices for a safe environment of care, part II" provides guidance on building design; movement of patients, personnel, supplies, and equipment; environmental controls; safety and security; and control of noise and distractions. Whether the OR suite evolves through construction, reconstruction, or remodeling, a multidisciplinary team of construction experts and health care professionals should create a functional plan and communicate at every stage of the project to maintain a safe environment and achieve a well-designed outcome. Emergency preparedness, a facility-wide security plan, and minimization of noise and distractions in the OR also help enhance the safety of the perioperative environment. Copyright © 2014 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Employment and contextual impact of safe and unsafe sexual practices for STI and HIV: the situation in China.

Science.gov (United States)

Wang, S M; Gao, M Y

2000-08-01

China's dual employment system plays a crucial role in sexually transmitted infections (STIs) and HIV-related safe and unsafe sexual practices among young Chinese people. Social and psychological determinants of safe and unsafe sexual practices for HIV infection among young people in Sichuan, China were examined. Our findings indicate that changes in China's social structure and employment system impact upon the social contextual involvement and socio-sexual practice of young Chinese people. The findings in the study suggest that the employment-related contextual involvement was a major predictor in the relationships between demography, information, and psychological risk-taking factors on one hand and the people's safe and unsafe sexual practices on the other. Self-employed people (officially called 'getihu') were more likely than the state-employed people to engage in unprotected sex with casual sexual partners. As China undergoes social restructuring and many state-employed people are laid off, the risk may also extend into the broader non-self-employed population as more state-employed people become involved not only in the self-employed getihu's socioeconomic activities but also in their unconventional socio-sexual practices. Collective vulnerability to STI and HIV, due to the current socio-sexual practices of the getihu young people, has created a new frontier for STI and HIV prevention in today's China, as well as demonstrating the importance of collective action with STI and AIDS prevention strategies within relevant social and sub-cultural contexts.

ETHEL's systems and facilities for safe management of tritiated wastes

International Nuclear Information System (INIS)

Mannone, F.; Dworschak, H.; Vassallo, G.

1992-01-01

The European Tritium Handling Experimental Laboratory (ETHEL) is a new tritium facility at the Commission of the European Community's Joint Research Centre, Ispra Site. The laboratory, destined to handle multigram amounts of tritium for safety related R and D purposes, is foreseen to start radioactive operations in late 1992. The general operation and maintenance of laboratory systems and future experiments will generate tritiated wastes in gaseous, liquid and solid forms. The management of such wastes under safe working conditions is a stringent laboratory requirement aimed at minimizing the risk of unacceptable tritium exposures to workers and the general public. This paper describes the main systems and facilities installed in ETHEL for the safe management of tritiated wastes

Model Code of Safe Practice in the Petroleum Industry: Pt. 8

Energy Technology Data Exchange (ETDEWEB)

1991-01-01

This code has been prepared for use on a worldwide basis as a guide to safe practice for those concerned with drilling and production operations for oil and gas in offshore areas. It is intended to provide information and guidance on those offshore drilling, production and support activities which have an impact on safety and therefore require detailed care and attention. Each chapter of the Code covers an important drilling, production or support activity and has an introduction which describes the part each activity plays in the overall offshore operation. (author).

A pilot survey of the U.S. medical waste industry to determine training needs for safely handling highly infectious waste.

Science.gov (United States)

Le, Aurora B; Hoboy, Selin; Germain, Anne; Miller, Hal; Thompson, Richard; Herstein, Jocelyn J; Jelden, Katelyn C; Beam, Elizabeth L; Gibbs, Shawn G; Lowe, John J

2018-02-01

The recent Ebola outbreak led to the development of Ebola virus disease (EVD) best practices in clinical settings. However, after the care of EVD patients, proper medical waste management and disposal was identified as a crucial component to containing the virus. Category A waste-contaminated with EVD and other highly infectious pathogens-is strictly regulated by governmental agencies, and led to only several facilities willing to accept the waste. A pilot survey was administered to determine if U.S. medical waste facilities are prepared to handle or transport category A waste, and to determine waste workers' current extent of training to handle highly infectious waste. Sixty-eight percent of survey respondents indicated they had not determined if their facility would accept category A waste. Of those that had acquired a special permit, 67% had yet to modify their permit since the EVD outbreak. This pilot survey underscores gaps in the medical waste industry to handle and respond to category A waste. Furthermore, this study affirms reports a limited number of processing facilities are capable or willing to accept category A waste. Developing the proper management of infectious disease materials is essential to close the gaps identified so that states and governmental entities can act accordingly based on the regulations and guidance developed, and to ensure public safety. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Sociodemographic characteristics and handling of life-threatening ...

African Journals Online (AJOL)

Most TBAs deliver 4 newborn monthly, i.e. 148 (22.6%), and the mean number of newborn delivered monthly was 3.9. Concerning the mode of handling of the difficult cases, majority, i.e. 338 ... agenda of many global efforts, such as the safe motherhood .... of rural women and training of health attendants in rural areas.

Biodiesel Handling and Use Guide (Fifth Edition)

Energy Technology Data Exchange (ETDEWEB)

Alleman, T.L.; McCormick, R.L.; Christensen, E.D.; Fioroni, G.; Moriarty. K.; Yanowitz, J.

2016-11-08

This document is a guide for those who blend, distribute, and use biodiesel and biodiesel blends. It provides basic information on the proper and safe use of biodiesel and biodiesel blends in engines and boilers, and is intended to help fleets, individual users, blenders, distributors, and those involved in related activities understand procedures for handling and using biodiesel fuels.

The gas cushion technique as a handling means for the remote removal of tokamak segments

International Nuclear Information System (INIS)

Removille, J.; Stephano, R.

1983-01-01

The gas cushion technique has been studied as offering a compact, flexible and safe way of handling massive objects. The evolution of the gas-cushion handling philosophy is discussed and examples presented related to the displacements of different loads in the torus and in the reactor hall. A short technical comparison with the C-frame handling concept is made in the conclusion. (author)

Governance implications of nanomaterials companies' inconsistent risk perceptions and safety practices

Energy Technology Data Exchange (ETDEWEB)

Engeman, Cassandra D. [University of California, Santa Barbara, Department of Sociology (United States); Baumgartner, Lynn; Carr, Benjamin M.; Fish, Allison M.; Meyerhofer, John D. [UC Center for the Environmental Implications of Nanotechnology (UC CEIN), University of California, Santa Barbara (United States); Satterfield, Terre A. [University of California, Santa Barbara, NSF Center for Nanotechnology and Society (United States); Holden, Patricia A. [UC Center for the Environmental Implications of Nanotechnology (UC CEIN), University of California, Santa Barbara (United States); Harthorn, Barbara Herr, E-mail: harthorn@cns.ucsb.edu [University of California, Santa Barbara, NSF Center for Nanotechnology and Society (United States)

2012-03-15

Current research on the nanotechnology industry indicates its downstream expansion at a rapid pace, while toxicological research and best practices for environmental health and safety are still being developed. Companies that use and/or produce engineered nanomaterials (ENMs) have enormous potential to influence safe-handling practices for ENMs across the product life cycle. Knowledge of both industry practices and leaders' perceptions of risk is vital for understanding how companies will act to control potential environmental and health risks. This article reports results from a new international survey of nanomaterials companies in 14 countries. In this survey, company participants reported relatively high levels of uncertainty and/or perceived risk with regard to ENMs. However, these perspectives were not accompanied by expected risk-avoidant practices or preferences for regulatory oversight. A majority of companies indicated 'lack of information' as a significant impediment to implementing nano-specific safety practices, but they also reported practices that were inconsistent with widely available guidance. Additionally, in the absence of safe-handling regulations, companies reported nano-specific health and safety programs that were narrow in scope. Taken together, these findings indicate that health and safety guidance is not reaching industry. While industry leaders' reluctance toward regulation might be expected, their own reported unsafe practices and recognition of possible risks suggest a more top-down approach from regulators is needed to protect workers and the environment.

Working safely with radioactive materials

International Nuclear Information System (INIS)

Davies, Wynne

1993-01-01

In common with exposure to many other laboratory chemicals, exposure to ionising radiations and to radioactive materials carries a small risk of causing harm. Because of this, there are legal limits to the amount of exposure to ionising radiations at work and special rules for working with radioactive materials. Although radiation protection is a complex subject it is possible to simplify to 10 basic things you should do -the Golden Rules. They are: 1) understand the nature of the hazard and get practical training; 2) plan ahead to minimise time spent handling radioactivity; 3) distance yourself appropriately from sources of radiation; 4) use appropriate shielding for the radiation; 5) contain radioactive materials in defined work areas; 6) wear appropriate protective clothing and dosimeters; 7) monitor the work area frequently for contamination control; 8) follow the local rules and safe ways of working; 9) minimise accumulation of waste and dispose of it by appropriate routes, and 10) after completion of work, monitor, wash, and monitor yourself again. These rules are expanded in this article. (author)

Evaluation of hygiene practices and microbiological quality of cooked meat products during slicing and handling at retail.

Science.gov (United States)

Pérez-Rodríguez, F; Castro, R; Posada-Izquierdo, G D; Valero, A; Carrasco, E; García-Gimeno, R M; Zurera, G

2010-10-01

Cooked meat ready-to-eat products are recognized to be contaminated during slicing which, in the last years, has been associated with several outbreaks. This work aimed to find out possible relation between the hygiene practice taking place at retail point during slicing of cooked meat products in small and medium-sized establishments (SMEs) and large-sized establishments (LEs) and the microbiological quality of sliced cooked meat products. For that, a checklist was drawn up and filled in based on scoring handling practice during slicing in different establishments in Cordoba (Southern Spain). In addition, sliced cooked meats were analyzed for different microbiological indicators and investigated for the presence of Listeria spp. and Listeria monocytogenes. Results indicated that SMEs showed a more deficient handling practices compared to LEs. In spite of these differences, microbiological counts indicated similar microbiological quality in cooked meat samples for both types of establishments. On the other hand, Listeria monocytogenes and Listeria inocua were isolated from 7.35% (5/68) and 8.82% (6/68) of analyzed samples, respectively. Positive samples for Listeria spp. were found in establishments which showed acceptable hygiene levels, though contamination could be associated to the lack of exclusiveness of slicers at retail points. Moreover, Listeria spp presence could not be statistically linked to any microbiological parameters; however, it was observed that seasonality influenced significantly (Phygiene practices, focused specially on SMEs. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Sample handling in surface sensitive chemical and biological sensing: a practical review of basic fluidics and analyte transport.

Science.gov (United States)

Orgovan, Norbert; Patko, Daniel; Hos, Csaba; Kurunczi, Sándor; Szabó, Bálint; Ramsden, Jeremy J; Horvath, Robert

2014-09-01

This paper gives an overview of the advantages and associated caveats of the most common sample handling methods in surface-sensitive chemical and biological sensing. We summarize the basic theoretical and practical considerations one faces when designing and assembling the fluidic part of the sensor devices. The influence of analyte size, the use of closed and flow-through cuvettes, the importance of flow rate, tubing length and diameter, bubble traps, pressure-driven pumping, cuvette dead volumes, and sample injection systems are all discussed. Typical application areas of particular arrangements are also highlighted, such as the monitoring of cellular adhesion, biomolecule adsorption-desorption and ligand-receptor affinity binding. Our work is a practical review in the sense that for every sample handling arrangement considered we present our own experimental data and critically review our experience with the given arrangement. In the experimental part we focus on sample handling in optical waveguide lightmode spectroscopy (OWLS) measurements, but the present study is equally applicable for other biosensing technologies in which an analyte in solution is captured at a surface and its presence is monitored. Explicit attention is given to features that are expected to play an increasingly decisive role in determining the reliability of (bio)chemical sensing measurements, such as analyte transport to the sensor surface; the distorting influence of dead volumes in the fluidic system; and the appropriate sample handling of cell suspensions (e.g. their quasi-simultaneous deposition). At the appropriate places, biological aspects closely related to fluidics (e.g. cellular mechanotransduction, competitive adsorption, blood flow in veins) are also discussed, particularly with regard to their models used in biosensing. Copyright © 2014 Elsevier B.V. All rights reserved.

Torus sector handling system

International Nuclear Information System (INIS)

Grisham, D.L.

1981-01-01

A remote handling system is proposed for moving a torus sector of the accelerator from under the cryostat to a point where it can be handled by a crane and for the reverse process for a new sector. Equipment recommendations are presented, as well as possible alignment schemes. Some general comments about future remote-handling methods and the present capabilities of existing systems will also be included. The specific task to be addressed is the removal and replacement of a 425 to 450 ton torus sector. This requires a horizontal movement of approx. 10 m from a normal operating position to a point where its further transport can be accomplished by more conventional means (crane or floor transporter). The same horizontal movement is required for reinstallation, but a positional tolerance of 2 cm is required to allow reasonable fit-up for the vacuum seal from the radial frames to the torus sector. Since the sectors are not only heavy but rather tall and narrow, the transport system must provide a safe, stable, and repeatable method fo sector movement. This limited study indicates that the LAMPF-based method of transporting torus sectors offers a proven method of moving heavy items. In addition, the present state of the art in remote equipment is adequate for FED maintenance

Safe Injection Practices in Primary Health Care Settings of Naxalbari Block, Darjeeling District, West Bengal.

Science.gov (United States)

Chaudhuri, Sudip Banik; Ray, Kuntala

2016-01-01

Unsafe injection can transmit many diseases to patients, injection providers and healthy people of community. To find out critical steps whether executed according to recommended best practice methods, availability of equipments in health facilities for safe injection practices and some important steps of waste disposal methods. This facility-based cross-sectional observational study was conducted among 30 Auxiliary nurse midwives (ANM) & 27 nursing staffs (NS) to assess certain aspects of their practice while administrating injection and disposal of the disposables. Health facilities were also observed to asses necessary equipments of safe injection and waste disposal methods. Among the health workers 93.3% ANM and 100% NS took sterile syringe from sterile unopened packet, all of the study subjects washed hand before giving injection, 13.3% of ANMs and 8% of NS are fully vaccinated against Hep B, 53.3% of ANM and all NS are practices non recapping. Only 13.33% sub centres along with PHC & BPHC had at least one puncture resistant leak proof container, 86.7% sub centres, PHC are free from loose needles. Transport for off side treatment is the method of waste disposal in case of 73.3% cases sub centres, PHC & BPHC. There is need to educate, train and motivate service providers in proper methods of giving injection along with improve the adequacy of supply of required equipments.

Effects of organizational safety practices and perceived safety climate on PPE usage, engineering controls, and adverse events involving liquid antineoplastic drugs among nurses.

Science.gov (United States)

DeJoy, David M; Smith, Todd D; Woldu, Henok; Dyal, Mari-Amanda; Steege, Andrea L; Boiano, James M

2017-07-01

Antineoplastic drugs pose risks to the healthcare workers who handle them. This fact notwithstanding, adherence to safe handling guidelines remains inconsistent and often poor. This study examined the effects of pertinent organizational safety practices and perceived safety climate on the use of personal protective equipment, engineering controls, and adverse events (spill/leak or skin contact) involving liquid antineoplastic drugs. Data for this study came from the 2011 National Institute for Occupational Safety and Health (NIOSH) Health and Safety Practices Survey of Healthcare Workers which included a sample of approximately 1,800 nurses who had administered liquid antineoplastic drugs during the past seven days. Regression modeling was used to examine predictors of personal protective equipment use, engineering controls, and adverse events involving antineoplastic drugs. Approximately 14% of nurses reported experiencing an adverse event while administering antineoplastic drugs during the previous week. Usage of recommended engineering controls and personal protective equipment was quite variable. Usage of both was better in non-profit and government settings, when workers were more familiar with safe handling guidelines, and when perceived management commitment to safety was higher. Usage was poorer in the absence of specific safety handling procedures. The odds of adverse events increased with number of antineoplastic drugs treatments and when antineoplastic drugs were administered more days of the week. The odds of such events were significantly lower when the use of engineering controls and personal protective equipment was greater and when more precautionary measures were in place. Greater levels of management commitment to safety and perceived risk were also related to lower odds of adverse events. These results point to the value of implementing a comprehensive health and safety program that utilizes available hazard controls and effectively communicates

Handling e-waste in developed and developing countries: initiatives, practices, and consequences.

Science.gov (United States)

Sthiannopkao, Suthipong; Wong, Ming Hung

2013-10-01

Discarded electronic goods contain a range of toxic materials requiring special handling. Developed countries have conventions, directives, and laws to regulate their disposal, most based on extended producer responsibility. Manufacturers take back items collected by retailers and local governments for safe destruction or recovery of materials. Compliance, however, is difficult to assure, and frequently runs against economic incentives. The expense of proper disposal leads to the shipment of large amounts of e-waste to China, India, Pakistan, Nigeria, and other developing countries. Shipment is often through middlemen, and under tariff classifications that make quantities difficult to assess. There, despite the intents of national regulations and hazardous waste laws, most e-waste is treated as general refuse, or crudely processed, often by burning or acid baths, with recovery of only a few materials of value. As dioxins, furans, and heavy metals are released, harm to the environment, workers, and area residents is inevitable. The faster growth of e-waste generated in the developing than in the developed world presages continued expansion of a pervasive and inexpensive informal processing sector, efficient in its own way, but inherently hazard-ridden. Copyright © 2012 Elsevier B.V. All rights reserved.

Development of Pneumatic Transport System (PTS) for safe handling of uranium oxide powder in UMP/UED

International Nuclear Information System (INIS)

Manna, S.; Satpati, S.K.; Roy, S.B.

2009-01-01

Tonnage quantity radioactive uranium oxide powder of particle size sub micron to 100 micron is handled in Uranium Metal Plant (UMP), UED/BARC for production of nuclear grade uranium metal, required for fuelling research reactors - Dhruva and Cirus. A Pneumatic Transfer System (PTS) using vacuum has been introduced and is being used for handling radioactive powder to improve radiation protection

Guide of good practices for occupational radiological protection in plutonium facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-06-01

This Technical Standard (TS) does not contain any new requirements. Its purpose is to provide guides to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. the technical rationale is given to allow US Department of Energy (DOE) health physicists to adapt the recommendations to similar situations throughout the DOE complex. Generally, DOE contractor health physicists will be responsible to implement radiation protection activities at DOE facilities and DOE health physicists will be responsible for oversight of those activities. This guidance is meant to be useful for both efforts. This TS replaces PNL-6534, Health Physics Manual of Good Practices for Plutonium Facilities, by providing more complete and current information and by emphasizing the situations that are typical of DOE`s current plutonium operations; safe storage, decontamination, and decommissioning (environmental restoration); and weapons disassembly.

Practical and safe implementation of disposal with prefabricated EBS modules

International Nuclear Information System (INIS)

Kawamura, Hideki; McKinley, Ian G.; Neall, Fiona B.

2008-01-01

The use of prefabricated EBS modules ('PEMs') to minimise the problems involved with handling compacted bentonite and ensuring that it is emplaced to established quality levels has been investigated in various national programmes for disposal of both HLW and SF. To date, however, this has tended to be decoupled from studies of related operational aspects such as assessing / minimising the consequences of use of concrete for support structures, ensuring ease of tele-operated reversal of waste packages during emplacement (e.g. in the event of operational disturbances) / retrieval at a later time, logistical optimisation (especially for programmes with large waste inventories) and cost minimisation. It is clear that specific aspects of operational safety and practicality can be considerably enhanced if designs are modified with a focus on them. It is trickier to provide optimised solutions, which simultaneously address all these critical points. Nevertheless, with a bit of lateral thinking, it appears possible to devise options that may not only ease the operational phase, but may also actually improve post-closure safety case robustness - although improved, more realistic performance assessment codes and databases will be needed to demonstrate this rigorously. To illustrate this approach, an example will be presented based of disposal of vitrified HLW in a fractured hard rock; the general principles involved are, however, also applicable to other higher activity wastes and other host rocks. Key aspects of the design are: Optimisation of PEM design for both short-term and long-term performance; Development of a rail emplacement system which eases remote handled emplacement / recovery; Large diameter, lined emplacement tunnels to ensure operational robustness; Use of multi-package overpacks (e.g. 6 HLW containers in each PEM) and short tunnels to ease emplacement logistics; and Backfilling with a non-swelling sacrificial pH buffer (eases handling and improves

American Nurses Association position statement on elimination of manual patient handling to prevent work-related musculoskeletal disorders.

Science.gov (United States)

In order to establish a safe environment for nurses and patients, the American Nurses Association (ANA) supports actions and policies that result in the elimination of manual patient handling. Patient handling, such as lifting, repositioning, and transferring, has conventionally been performed by nurses. The performance of these tasks exposes nurses to increased risk for work-related musculoskeletal disorders. With the development of assistive equipment, such as lift and transfer devices, the risk of musculoskeletal injury can be significantly reduced. Effective use of assistive equipment and devices for patient handling creates a safe healthcare environment by separating the physical burden from the nurse and ensuring the safety, comfort, and dignity of the patient.

Safe use of ionizing radiations

Energy Technology Data Exchange (ETDEWEB)

1973-01-01

Based on the ''Code of Practice for the protection of persons against ionizing radiations arising from medical and dental use'' (CIS 74-423), this handbook shows how hospital staff can avoid exposing themselves and others to these hazards. It is designed particularly for junior and student nurses. Contents: ionizing radiations, their types and characteristics; their uses and dangers; basic principles in their safe use; safe use in practice; explanation of terms.

21 CFR 58.107 - Test and control article handling.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

Getting to grips with remote handling and robotics

Energy Technology Data Exchange (ETDEWEB)

Mosey, D [Ontario Hydro, Toronto (Canada)

1984-12-01

A report on the Canadian Nuclear Society Conference on robotics and remote handling in the nuclear industry, September 1984. Remote handling in reactor operations, particularly in the Candu reactors is discussed, and the costs and benefits of use of remote handling equipment are considered. Steam generator inspection and repair is an area in which practical application of robotic technology has made a major advance.

Canadian East Coast offshore petroleum industry safe lifting practices respecting offshore pedestal cranes, offshore containers, loose gear, other lifting devices, and operational best practices : standard practices

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-11-15

This document was developed by a working group with representatives from the petroleum industry, the Offshore Petroleum Boards and Certifying Authorities. It outlines industry best practices for operators responsible for the management, planning and execution of offshore lifting operations. Its purpose is to assist in the interpretation of applicable legislation and standards. Considered within the practice are safe design requirements, manufacture, certification, testing, maintenance and inspection requirements for pedestal cranes, offshore containers, loose gear and lifting devices. Operational best practices for lifting operations are also included along with a section that identifies additional requirements for personnel lifting operations, including personnel transfers by crane and man-riding operations. 82 refs., 2 tabs., 4 figs., 3 appendices.

Moving and handling education in the community: technological innovations to improve practice.

Science.gov (United States)

Wanless, Stephen; Page, Andrea

2009-12-01

Efforts to reduce injuries associated with patient handling are often based on tradition and personal experience rather than sound educational theory. The purpose of this article is to summarize current evidence for educational interventions designed to reduce primary care staff injuries: a significant problem for decades. Evidence suggests that the current 'classroom' teaching of moving and handling is ineffective. There is a growing body of evidence to support newer interventions that are effective or show promise in reducing musculoskeletal injuries in health professionals (Freitag et al, 2007). The authors discuss potential solutions through moving and handling-related motion capture simulation and the use of e-learning to promote an understanding of the principles associated with patient handling tasks.

Religious Serpent Handling and Community Relations.

Science.gov (United States)

Williamson, W Paul; Hood, Ralph W

2015-01-01

Christian serpent handling sects of Appalachia comprise a community that has long been mischaracterized and marginalized by the larger communities surrounding them. To explore this dynamic, this article traces the emergence of serpent handling in Appalachia and the emergence of anti-serpent-handling state laws, which eventually failed to curb the practice, as local communities gave serpent handling groups support. We present two studies to consider for improving community relations with serpent handling sects. In study 1, we present data relating the incidence of reported serpent-bite deaths with the rise of anti-serpent-handling laws and their eventual abatement, based on increasing acceptance of serpent handlers by the larger community. Study 2 presents interview data on serpent bites and death that provide explanations for these events from the cultural and religious perspective. We conclude that first-hand knowledge about serpent handlers, and other marginalized groups, helps to lessen suspicion and allows them to be seen as not much different, which are tendencies that are important for promoting inter-community harmony.

The design of in-cell crane handling systems for nuclear plants

International Nuclear Information System (INIS)

Hansford, S.M.; Scott, R.

1992-01-01

The reprocessing and waste management facilities at (BNFL's) British Nuclear Fuels Limited's Sellafield site make extensive use of crane handling systems. These range from conventional mechanical handling operations as used generally in industry to high integrity applications through to remote robotic handling operations in radiation environments. This paper describes the design methodologies developed for the design of crane systems for remote handling operations - in-cell crane systems. In most applications the in-cell crane systems are an integral part of the plant process equipment and reliable and safe operations are a key design parameter. Outlined are the techniques developed to achieve high levels of crane system availability for operations in hazardous radiation environments. These techniques are now well established and proven through many years of successful plant operation. A recent application of in-cell crane handling systems design for process duty application is described. The benefits of a systematic design approach and a functionally-based engineering organization are also highlighted. (author)

Design of startup neutron detector handling mechanism instrumentation

International Nuclear Information System (INIS)

Upadhyay, Chandra Kant; Sivaramakrishna, M.; Nagaraj, C.P.; Madhusoodanan, K.

2010-01-01

In PFBR, to monitor the reactor during first fuel loading and low power operation, special provision is made in the central fuel subassembly to accommodate the neutron detectors. During fuel handling operations, these detectors need to be lifted up to facilitate plug rotation. These detectors are also need to be lifted from the core to save their life, during intermediate and high power operations. Towards this, a mobile assembly containing these detectors is made with lowering and retracting provision. To control this operation, constant speed motor, torque limiter, proximity switch, wire drawn potentiometer, magnetic reed switches are provided. To ensure a smooth and safe handling of this assembly, control logic with necessary interlocks is developed. (author)

Level of awareness of cervical and breast cancer risk factors and safe practices among college teachers of different states in india: do awareness programmes have an impact on adoption of safe practices?

Science.gov (United States)

Shankar, Abhishek; Rath, Gk; Roy, Shubham; Malik, Abhidha; Bhandari, Ruchir; Kishor, Kunal; Barnwal, Keshav; Upadyaya, Sneha; Srivastava, Vivek; Singh, Rajan

2015-01-01

Breast and cervical cancers are the most common causes of cancer mortality among women in India, but actually they are largely preventable diseases. Although early detection is the only way to reduce morbidity and mortality, there are limited data on breast and cervical cancer knowledge, safe practices and attitudes of teachers in India. The purpose of this study is to assess the level of awareness and impact of awareness programs in adoption of safe practices in prevention and early detection. This assessment was part of a pink chain campaign on cancer awareness. During cancer awareness events in 2011 at various women colleges in different parts in India, a pre-test related to cervical cancer and breast cancer was followed by an awareness program. Post-tests using the same questionnaire were conducted at the end of the interactive session, at 6 months and 1 year. A total of 156 out of 182 teachers participated in the study (overall response rate was 85.7 %). Mean age of the study population was 42.4 years (range- 28-59 yrs). There was a significant increase in level of knowledge regarding cervical and breast cancer at 6 months and this was sustained at 1 year. Adoption of breast self examination (BSE) was significantly more frequent in comparison to CBE, mammography and the Pap test. Magazines and newspapers were sources for knowledge regarding screening tests for breast cancer in more than 60% of teachers where as more than 75% were educated by doctors regarding the Pap test. Post awareness at 6 months and 1 year, there was a significant change in alcohol and smoking habits. Major reasons for not doing screening test were found to be ignorance (50%), lethargic attitude (44.8%) and lack of time (34.6%). Level of knowledge of breast cancer risk factors, symptoms and screening methods was high as compared to cervical cancer. There was a significant increase in level of knowledge regarding cervical and breast cancer at 6 months and this was sustained at 1 year

Safe delivery care practices in western Nepal: Does women's autonomy influence the utilization of skilled care at birth?

Science.gov (United States)

Bhandari, Tulsi Ram; Kutty, V Raman; Sarma, P Sankara; Dangal, Ganesh

2017-01-01

Despite various efforts to increase the utilization of skilled birth attendants (SBA), nearly two-thirds of deliveries take place at home without the assistance of SBAs in Nepal. We hypothesized that the ability of women to take decisions about their own lives-women's autonomy-plays an important part in birth choices. To know this, we conducted a community-based cross-sectional study for assessing women's autonomy and utilization of safe delivery care service in Kapilvastu district of Nepal from June to October 2014. We used multivariate modeling to associate socioeconomic factors and women's autonomy with the utilization of safe delivery care services. Just over one-third of women sought institutional delivery care during the birth of their last child. Out of the total deliveries at health facilities, nearly 58% women visited health facility for self-reported emergency obstructive care. Only 6.2% home deliveries were handled by health workers and 14.7% women used the safe delivery kit for home delivery care. Higher levels of women's education had a strong positive association (odds ratio = 24.11, CI = 9.43-61.64) with institutional delivery care. Stratified analysis showed that when the husband is educated, women's education seems to work partly through their autonomy in decision making. Educational status of women emerged as one of the key predictors of the utilization of delivery care services in Kapilvastu district. Economic status of household and husband's education are other dominant predictors of the utilization of safe delivery care services. Improving the economic and educational status may be the way out for improving the proportion of institutional deliveries. Women's autonomy may be an important mediating factor in this pathway.

Cooper-Harper Experience Report for Spacecraft Handling Qualities Applications

Science.gov (United States)

Bailey, Randall E.; Jackson, E. Bruce; Bilimoria, Karl D.; Mueller, Eric R.; Frost, Chad R.; Alderete, Thomas S.

2009-01-01

A synopsis of experience from the fixed-wing and rotary-wing aircraft communities in handling qualities development and the use of the Cooper-Harper pilot rating scale is presented as background for spacecraft handling qualities research, development, test, and evaluation (RDT&E). In addition, handling qualities experiences and lessons-learned from previous United States (US) spacecraft developments are reviewed. This report is intended to provide a central location for references, best practices, and lessons-learned to guide current and future spacecraft handling qualities RDT&E.

Fission reactor recycling pump handling device

International Nuclear Information System (INIS)

Togasawa, Hiroshi; Komita, Hideo; Susuki, Shoji; Endo, Takio; Yamamoto, Tetsuzo; Takahashi, Hideaki; Saito, Noboru.

1991-01-01

This invention provides a device for handling a recycling pump in a nuclear reactor upon periodical inspections in a BWR type power plant. That is, in a handling device comprising a support for supporting components of a recycling pump, and a lifter for vertically moving the support below a motor case disposed passing through a reactor pressure vessel, a weight is disposed below the support. Then, the center of gravity of the components, the support and the entire weight is substantially aligned with the position for the support. With such a constitution, the components can be moved vertically to the motor case extremely safely, to remarkably suppress vibrations. Further, the operation safety can remarkably be improved by preventing turning down upon occurrence of earthquakes. Further, since vibration-proof jigs as in a prior art can be saved, operation efficiency can be improved. (I.S.)

Fission reactor recycling pump handling device

Energy Technology Data Exchange (ETDEWEB)

Togasawa, Hiroshi; Komita, Hideo; Susuki, Shoji; Endo, Takio; Yamamoto, Tetsuzo; Takahashi, Hideaki; Saito, Noboru

1991-06-24

This invention provides a device for handling a recycling pump in a nuclear reactor upon periodical inspections in a BWR type power plant. That is, in a handling device comprising a support for supporting components of a recycling pump, and a lifter for vertically moving the support below a motor case disposed passing through a reactor pressure vessel, a weight is disposed below the support. Then, the center of gravity of the components, the support and the entire weight is substantially aligned with the position for the support. With such a constitution, the components can be moved vertically to the motor case extremely safely, to remarkably suppress vibrations. Further, the operation safety can remarkably be improved by preventing turning down upon occurrence of earthquakes. Further, since vibration-proof jigs as in a prior art can be saved, operation efficiency can be improved. (I.S.).

Attitudes of western Canadian cow-calf producers towards the Code of Practice for the Care and Handling of Beef Cattle.

Science.gov (United States)

Moggy, Melissa; Pajor, Edmond; Thurston, Wilfreda; Parker, Sarah; Greter, Angela; Schwartzkopf-Genswein, Karen; Campbell, John; Windeyer, M Claire

2017-11-01

This study describes western Canadian cow-calf producers' attitudes towards the Code of Practice for the Care and Handling of Beef Cattle (COPB). Most respondents had not read the COPB. Of those familiar with the COPB, most agreed with it, but it did not have a major influence on their decisions.

Haptic shared control improves hot cell remote handling despite controller inaccuracies

NARCIS (Netherlands)

van Oosterhout, J.; Abbink, D. A.; Koning, J. F.; Boessenkool, H.; Wildenbeest, J. G. W.; Heemskerk, C. J. M.

2013-01-01

A promising solution to improve task performance in ITER hot cell remote handling is the use of haptic shared control. Haptic shared control can assist the human operator along a safe and optimal path with continuous guiding forces from an intelligent autonomous controller. Previous research tested

Sample handling of clinical specimens for ultratrace element analysis

International Nuclear Information System (INIS)

Cornelis, R.

1987-01-01

Some simple logistics to an improved sample handling of clinical specimens are presented. This comprises clean room conditions, clean laboratory ware, ultra-pure reagents and good analytical practice. Sample handling procedures for blood, urine, soft tissues and pharmaceuticals are briefly discussed. (author) 26 refs

Development of spent fuel remote handling technology

International Nuclear Information System (INIS)

Yoon, Ji Sup; Park, B. S.; Park, Y. S.; Oh, S. C.; Kim, S. H.; Cho, M. W.; Hong, D. H.

1997-12-01

Since the nation's policy on spent fuel management is not finalized, the technical items commonly required for safe management and recycling of spent fuel - remote technologies of transportation, inspection, maintenance, and disassembly of spent fuel - are selected and pursued. In this regards, the following R and D activities are carried out : collision free transportation of spent fuel assembly, mechanical disassembly of spent nuclear fuel and graphical simulation of fuel handling / disassembly process. (author). 36 refs., 16 tabs., 77 figs

Contamination confinement system of irradiated materials handling laboratories

International Nuclear Information System (INIS)

Lobao, A. dos S.T.; Araujo, J.A. de; Camilo, R.L.

1988-06-01

A study to prevent radioctivity release in lab scale is presented. As a basis for the design all the limits established by the IAEA for ventilation systems were observed. An evaluation of the different parameters involved in the design have been made, resulting in the especification of the working areas, ducts and filtering systems in order to get the best conditions for the safe handling of irradiated materials. (author) [pt

Human factors issues in fuel handling

International Nuclear Information System (INIS)

Beattie, J.D.; Iwasa-Madge, K.M.; Tucker, D.A.

1994-01-01

The staff of the Atomic Energy Control Board wish to further their understanding of human factors issues of potential concern associated with fuel handling in CANDU nuclear power stations. This study contributes to that objective by analysing the role of human performance in the overall fuel handling process at Ontario Hydro's Darlington Nuclear Generating Station, and reporting findings in several areas. A number of issues are identified in the areas of design, operating and maintenance practices, and the organizational and management environment

Management of remote-handled defense transuranic wastes

International Nuclear Information System (INIS)

Ebra, M.A.; Pierce, G.D.; Carson, P.H.

1988-01-01

Transuranic (TRU) wastes generated by defense-related activities are scheduled for emplacement at the Waste Isolation Pilot Plant (WIPP) in New Mexico beginning in October 1988. After five years of operation as a research and development facility, the WIPP may be designated as a permanent repository for these wastes, if it has been demonstrated that this deep, geologically stable formation is a safe disposal option. Defense TRU wastes are currently stored at various Department of Energy (DOE) sites across the nation. Approximately 2% by volume of currently stored TRU wastes are defined, on the basis of dose rates, as remote-handled (RH). RH wastes continue to be generated at various locations operated by DOE contractors. They require special handling and processing prior to and during emplacement in the WIPP. This paper describes the strategy for managing defense RH TRU wastes

Practices of Handling

DEFF Research Database (Denmark)

Ræbild, Ulla

Abstract While few will dispute the idea that fashion designers relate to the notion of the body in their work practice, the actual embodied engagement of the designer, and the role that the personal bodies of the designers play in processes of fashion design, is an underexposed although nascent...... introduces four ways whereby fashion designers apply their own bodies as tools for design; a) re-activating past garment-design experiences, b) testing present garment-design experiences c) probing for new garment-design experiences and d) design of future garment experiences by body proxy. The paper...... is based on the Ph.D. thesis Addressing the Body – methodological practises in professional fashion design finalised October 2014 (Ræbild, in press)...

Decontamination of spills and residues of some pesticides and of protective clothing worn during the handling of the pesticides

Energy Technology Data Exchange (ETDEWEB)

Armour, M.A.; Nelson, C.; Sather, P. Briker, Y. [Univ. of Alberta, Edmonton (Canada)] [and others

1996-12-31

Users of pesticides may have waste or surplus quantities or spills for disposal. One alternative is to deactivate the pesticide at the handling site by using a straightforward chemical reaction. This option can be practical for those who use relatively small quantities of a large variety of pesticides, for example, greenhouse workers, small farmers, and agricultural researchers. This paper describes practical on-site methods for the disposal of spills or small waste quantities of five commonly used pesticides, Diazinon, Chlorpyrifos, Iprodione, 2,4-D, and Captan. These have been tested in the laboratory for the rate of disappearance of the pesticide, the degree of conversion to nontoxic products, the nature and identity of the products, the practicality of the method, and the ease of reproducibility. Methods selected were shown to be safe for the operator, reliable, and reproducible. Greater than 99% of the starting material had to be reacted under reasonable conditions and length of time. Detailed descriptions of the reactions are presented, so that they can be performed with reproducible results. Protective clothing worn during the handling and application of pesticides may become contaminated. Simple laundering does not always remove all of the pesticide residues. Thus, chronic dermal exposure may result from the pesticide-contaminated clothing. Appropriate methods of laundering using specific pretreatments have been determined. 7 refs.

Development of spent fuel remote handling technology

Energy Technology Data Exchange (ETDEWEB)

Yoon, Ji Sup; Park, B S; Park, Y S; Oh, S C; Kim, S H; Cho, M W; Hong, D H

1997-12-01

Since the nation`s policy on spent fuel management is not finalized, the technical items commonly required for safe management and recycling of spent fuel - remote technologies of transportation, inspection, maintenance, and disassembly of spent fuel - are selected and pursued. In this regards, the following R and D activities are carried out : collision free transportation of spent fuel assembly, mechanical disassembly of spent nuclear fuel and graphical simulation of fuel handling / disassembly process. (author). 36 refs., 16 tabs., 77 figs

Guidelines for safe practice of stereotactic body (ablative) radiation therapy

International Nuclear Information System (INIS)

Foote, Matthew; Barry, Tamara; Bailey, Michael; Smith, Leigh; Seeley, Anna; Siva, Shankar; Hegi-Johnson, Fiona; Booth, Jeremy; Ball, David; Thwaites, David

2015-01-01

The uptake of stereotactic ablative body radiation therapy (SABR) / stereotactic body radiation therapy (SBRT) worldwide has been rapid. The Australian and New Zealand Faculty of Radiation Oncology (FRO) assembled an expert panel of radiation oncologists, radiation oncology medical physicists and radiation therapists to establish guidelines for safe practice of SABR. Draft guidelines were reviewed by a number of international experts in the field and then distributed through the membership of the FRO. Members of the Australian Institute of Radiography and the Australasian College of Physical Scientists and Engineers in Medicine were also asked to comment on the draft. Evidence-based recommendations (where applicable) address aspects of departmental staffing, procedures and equipment, quality assurance measures, as well as organisational considerations for delivery of SABR treatments. Central to the guidelines is a set of key recommendations for departments undertaking SABR. These guidelines were developed collaboratively to provide an educational guide and reference for radiation therapy service providers to ensure appropriate care of patients receiving SABR.

Belgian and Spanish consumption data and consumer handling practices for fresh fruits and vegetables useful for further microbiological and chemical exposure assessment.

Science.gov (United States)

Jacxsens, L; Ibañez, I Castro; Gómez-López, V M; Fernandes, J Araujo; Allende, A; Uyttendaele, M; Huybrechts, I

2015-04-01

A consumer survey was organized in Spain and Belgium to obtain consumption data and to gain insight into consumer handling practices for fresh vegetables consumed raw or minimally processed (i.e., heads of leafy greens, bell peppers, tomatoes, fresh herbs, and precut and packed leafy greens) and fruits to be consumed without peeling (i.e., apples, grapes, strawberries, raspberries, other berries, fresh juices, and precut mixed fruit). This information can be used for microbiological and/or chemical food safety research. After extensive cleanup of rough databases for missing and extreme values and age correction, information from 583 respondents from Spain and 1,605 respondents from Belgium (18 to 65 years of age) was retained. Daily intake (grams per day) was calculated taking into account frequency and seasonality of consumption, and distributions were obtained that can be used in quantitative risk assessment for chemical hazards with chronic effects on human health. Data also were recalculated to obtain discrete distributions of consumption per portion and the corresponding frequency of consumption, which can be used in acute microbiological risk assessment or outbreak investigations. The ranked median daily consumption of fruits and vegetables was similar in Spain and Belgium: apple > strawberry > grapes > strawberries and raspberries; and tomatoes > leafy greens > bell peppers > fresh herbs. However, vegetable consumption was higher (in terms of both portion and frequency of consumption) in Spain than in Belgium, whereas the opposite was found for fruit consumption. Regarding consumer handling practices related to storage time and method, Belgian consumers less frequently stored their fresh produce in a refrigerator and did so for shorter times compared with Spanish consumers. Washing practices for lettuce heads and packed leafy greens also were different. The survey revealed differences between these two countries in consumption and consumer handling practices

Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

Energy Technology Data Exchange (ETDEWEB)

Mertz, G.

1999-12-16

This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements.

Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

International Nuclear Information System (INIS)

Mertz, G.

1999-01-01

This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements

Probing forces of menisci: what levels are safe for arthroscopic surgery

NARCIS (Netherlands)

Tuijthof, Gabriëlle J. M.; Horeman, Tim; Schafroth, Matthias U.; Blankevoort, Leendert; Kerkhoffs, Gino M. M. J.

2011-01-01

To facilitate effective learning, feedback on performance during arthroscopic training is essential. Less attention has been paid to feedback on monitoring safe handling of delicate tissues such as meniscus. The goal is to measure in vitro probing forces of menisci and compare them with a

A Review of Toxicity and Use and Handling Considerations for Guanidine, Guanidine Hydrochloride, and Urea.

Energy Technology Data Exchange (ETDEWEB)

Ertell, Katherine GB

2006-03-27

This is a technical report prepared for Oregon Sustainable Energy, LLC, under Agreement 06-19 with PNNL's Office of Small Business Programs. The request was to perform a review of the toxicity and safe handling of guanidine. The request was later amended to add urea. This report summarizes the toxicity data available in the scientific literature and provides an interpretation of the results and recommendations for handling these compounds.

Application of advanced handling techniques to transportation cask design

International Nuclear Information System (INIS)

Bennett, P.C.

1992-01-01

Sandia National Laboratories supports the US Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) applying technology to the safe transport of nuclear waste. Part of that development effort includes investigation of advanced handling technologies for automation of cask operations at nuclear waste receiving facilities. Although low radiation levels are expected near transport cask surfaces, cumulative occupational exposure at a receiving facility can be significant. Remote automated cask handling has the potential to reduce both the occupational exposure and the time necessary to process a cask. Thus, automated handling is consistent with DOE efforts to reduce the lifecycle costs of the waste disposal system and to maintain public and occupational radiological risks as low as reasonably achievable. This paper describes the development of advanced handling laboratory mock-ups and demonstrations for spent fuel casks. Utilizing the control enhancements described below, demonstrations have been carried out including cask location and identification, contact and non-contact surveys, impact limiter removal, tiedown release, uprighting, swing-free movement, gas sampling, and lid removal operations. Manually controlled movement around a cask under off-normal conditions has also been demonstrated

Fuel handling and storage systems in nuclear power plants

International Nuclear Information System (INIS)

1984-01-01

The scope of this Guide includes the design of handling and storage facilities for fuel assemblies from the receipt of fuel into the nuclear power plant until the fuel departs from that plant. The unirradiated fuel considered in this Guide is assumed not to exhibit any significant level of radiation so that it can be handled without shielding or cooling. This Guide also gives limited consideration to the handling and storage of certain core components. While the general design and safety principles are discussed in Section 2 of this Guide, more specific design requirements for the handling and storage of fuel are given in detailed sections which follow the general design and safety principles. Further useful information is to be found in the IAEA Technical Reports Series No. 189 ''Storage, Handling and Movement of Fuel and Related Components at Nuclear Power Plants'' and No. 198 ''Guide to the Safe Handling of Radioactive Wastes at Nuclear Power Plants''. However, the scope of the Guide does not include consideration of the following: (1) The various reactor physics questions associated with fuel and absorber loading and unloading into the core; (2) The design aspects of preparation of the reactor for fuel loading (such as the removal of the pressure vessel head for a light water reactor) and restoration after loading; (3) The design of shipping casks; (4) Fuel storage of a long-term nature exceeding the design lifetime of the nuclear power plant; (5) Unirradiated fuel containing plutonium

Adoption of the B2SAFE EUDAT replication service by the EPOS community

Science.gov (United States)

Cacciari, Claudio; Fares, Massimo; Fiameni, Giuseppe; Michelini, Alberto; Danecek, Peter; Wittenburg, Peter

2014-05-01

B2SAFE is the EUDAT service for moving and replicating data between sites and storage systems for different purposes. The goal of B2SAFE is to keep the data from a repository safe by replicating it across different geographical and administrative zones according to a set of well-defined policies. It is also a way to store large volumes of data permanently at those sites which are providing powerful on-demand data analysis facilities. In particular, B2SAFE operates on the domain of registered data where data objects are referable via persistent identifiers (PIDs). B2SAFE is more than just copying data because the PIDs must be carefully managed when data objects are moved or replicated. The EUDAT B2SAFE Service offers functionality to replicate datasets across different data centres in a safe and efficient way while maintaining all information required to easily find and query information about the replica locations. The information about the replica locations and other important information is stored in PID records, each managed in separate administrative domains. The B2SAFE Service is implemented as an iRODS module providing a set of iRODS rules or policies to interface with the EPIC handle API and uses the iRODS middleware to replicate datasets from a source data (or community) centre to a destination data centre. The definition of the dataset(s) to replicate is flexible and up to the communities using the B2SAFE service. While the B2SAFE is internally using the EPIC handle API, communities have the choice to use any PID system they prefer to assign PIDs to their digital objects. A reference to one or more EUDAT B2SAFE PIDs is returned by the B2SAFE service when a dataset is replicated. The presentation will introduce the problem space of B2SAFE, presents the achievements that have been made during the last year for enabling communities to make use of the B2SAFE service, demonstrates a EPOS use cases, outlines the commonalities and differences between the policies

Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

International Nuclear Information System (INIS)

Nieminen, Peetu; Esque, Salvador; Muhammad, Ali; Mattila, Jouni; Vaeyrynen, Jukka; Siuko, Mikko; Vilenius, Matti

2009-01-01

Department of Intelligent Hydraulics and Automation (IHA) of Tampere University of Technology has been involved in the European Fusion program since 1994 within the ITER reactor maintenance activities. In this paper we discuss the design and development of a six degrees of freedom water hydraulic manipulator with a force feedback for teleoperation tasks. The manipulator is planned to be delivered to Divertor Test Platform 2 (DTP2) during year 2008. The paper also discusses the possibility to improve the fail safe and redundant operation of the manipulator. During the design of the water hydraulic manipulator, special provisions have been made in order to meet the safety requirements such as servo valve block for redundant operation and safety vane brakes for fail safe operation.

Human factors issues in fuel handling

Energy Technology Data Exchange (ETDEWEB)

Beattie, J D; Iwasa-Madge, K M; Tucker, D A [Humansystems Inc., Milton, ON (Canada)

1994-12-31

The staff of the Atomic Energy Control Board wish to further their understanding of human factors issues of potential concern associated with fuel handling in CANDU nuclear power stations. This study contributes to that objective by analysing the role of human performance in the overall fuel handling process at Ontario Hydro`s Darlington Nuclear Generating Station, and reporting findings in several areas. A number of issues are identified in the areas of design, operating and maintenance practices, and the organizational and management environment. 1 fig., 4 tabs., 19 refs.

Cellular Manufacturing System with Dynamic Lot Size Material Handling

Science.gov (United States)

Khannan, M. S. A.; Maruf, A.; Wangsaputra, R.; Sutrisno, S.; Wibawa, T.

2016-02-01

Material Handling take as important role in Cellular Manufacturing System (CMS) design. In several study at CMS design material handling was assumed per pieces or with constant lot size. In real industrial practice, lot size may change during rolling period to cope with demand changes. This study develops CMS Model with Dynamic Lot Size Material Handling. Integer Linear Programming is used to solve the problem. Objective function of this model is minimizing total expected cost consisting machinery depreciation cost, operating costs, inter-cell material handling cost, intra-cell material handling cost, machine relocation costs, setup costs, and production planning cost. This model determines optimum cell formation and optimum lot size. Numerical examples are elaborated in the paper to ilustrate the characterictic of the model.

Probing forces of menisci : What levels are safe for arthroscopic surgery

NARCIS (Netherlands)

Tuijthof, G.J.M.; Horeman, T.; Schafroth, M.U.; Blankevoort, L.; Kerkhoffs, G.M.M.J.

2010-01-01

Purpose To facilitate effective learning, feedback on performance during arthroscopic training is essential. Less attention has been paid to feedback on monitoring safe handling of delicate tissues such as meniscus. The goal is to measure in vitro probing forces of menisci and compare them with a

Safe delivery care practices in western Nepal: Does women’s autonomy influence the utilization of skilled care at birth?

Science.gov (United States)

Kutty, V. Raman; Sarma, P. Sankara; Dangal, Ganesh

2017-01-01

Despite various efforts to increase the utilization of skilled birth attendants (SBA), nearly two-thirds of deliveries take place at home without the assistance of SBAs in Nepal. We hypothesized that the ability of women to take decisions about their own lives—women’s autonomy—plays an important part in birth choices. To know this, we conducted a community-based cross-sectional study for assessing women’s autonomy and utilization of safe delivery care service in Kapilvastu district of Nepal from June to October 2014. We used multivariate modeling to associate socioeconomic factors and women’s autonomy with the utilization of safe delivery care services. Just over one-third of women sought institutional delivery care during the birth of their last child. Out of the total deliveries at health facilities, nearly 58% women visited health facility for self-reported emergency obstructive care. Only 6.2% home deliveries were handled by health workers and 14.7% women used the safe delivery kit for home delivery care. Higher levels of women’s education had a strong positive association (odds ratio = 24.11, CI = 9.43–61.64) with institutional delivery care. Stratified analysis showed that when the husband is educated, women’s education seems to work partly through their autonomy in decision making. Educational status of women emerged as one of the key predictors of the utilization of delivery care services in Kapilvastu district. Economic status of household and husband’s education are other dominant predictors of the utilization of safe delivery care services. Improving the economic and educational status may be the way out for improving the proportion of institutional deliveries. Women’s autonomy may be an important mediating factor in this pathway. PMID:28771579

Containment system of contamination in irradiated materials handling laboratories

International Nuclear Information System (INIS)

Lobao, A.S.T.; Araujo, J.A. de; Camilo, R.L.

1988-01-01

A study to prevent radiactivity release in lab scale is presented. As a basis for the design all the limits established by the IAEA for ventilation systems were observed. An evaluation of the different parameters involved in the design have been made, resulting in the specification of the working areas, ducts and filtering systems in order to get the best conditions for the safe handling of irradiated materials. (author) [pt

Handling of sodium for the FFTF

International Nuclear Information System (INIS)

Ballif, J.L.; Meadows, G.E.

1978-06-01

Based on the High Temperature Sodium Facility (HTSF) experience and the extensive design efforts for FFTF, procedures are in place for the unloading of the tank cars and for the fill of the FFTF reactor. Special precautions have been taken to provide safe handling and to accommodate contingencies in operation. These contingencies include special protective suits allowing personnel to enter and correct conditions arising from fill operations in the course of moving 7.71 x 10 5 kg (1.7 x 10 6 lbs) of sodium from the tank cars into the reactor vessel and its loop system

Karate: Keep It Safe.

Science.gov (United States)

Jordan, David

1981-01-01

Safety guidelines for each phase of a karate practice session are presented to provide an accident-free and safe environment for teaching karate in a physical education or traditional karate training program. (JMF)

Approaches to the design of clean air handling facilities for radiopharmaceuticals

International Nuclear Information System (INIS)

2000-01-01

Manufacturing, handling and administering processes of radiopharmaceuticals have to meet the requirements of both the fields viz. ''radio'' activity and ''pharma'' activity. Both these fields often dictate conflicting requirements. A step by step analysis of these conflicts can lead to practices reasonably acceptable to both the fields. The design approaches include engineering concepts of radiation protection, concepts and practices for pharmaceuticals, biologically unsafe products/processes and manufacturing, handling and administering processes of radiopharmaceuticals

Creating Safe Spaces for Music Learning

Science.gov (United States)

Hendricks, Karin S.; Smith, Tawnya D.; Stanuch, Jennifer

2014-01-01

This article offers a practical model for fostering emotionally safe learning environments that instill in music students a positive sense of self-belief, freedom, and purpose. The authors examine the implications for music educators of creating effective learning environments and present recommendations for creating a safe space for learning,…

Redefining NHS complaint handling--the real challenge.

Science.gov (United States)

Seelos, L; Adamson, C

1994-01-01

More and more organizations find that a constructive and open dialogue with their customers can be an effective strategy for building long-term customer relations. In this context, it has been recognized that effective complaint-contact handling can make a significant contribution to organizations' attempts to maximize customer satisfaction and loyalty. Within the NHS, an intellectual awareness exists that effective complaint/contact handling can contribute to making services more efficient and cost-effective by developing customer-oriented improvement initiatives. Recent efforts have focused on redefining NHS complaint-handling procedures to make them more user-friendly and effective for both NHS employees and customers. Discusses the challenges associated with opening up the NHS to customer feedback. Highlights potential weaknesses in the current approach and argues that the real challenge is for NHS managers to facilitate a culture change that moves the NHS away from a long-established defensive complaint handling practice.

Conceptual design of a passively safe thorium breeder Pebble Bed Reactor

International Nuclear Information System (INIS)

Wols, F.J.; Kloosterman, J.L.; Lathouwers, D.; Hagen, T.H.J.J. van der

2015-01-01

Highlights: • This work proposes three possible designs for a thorium Pebble Bed Reactor. • A high-conversion PBR (CR > 0.96), passively safe and within practical constraints. • A thorium breeder PBR (220 cm core) in practical regime, but not passively safe. • A passively safe breeder, requiring higher fuel reprocessing and recycling rates. - Abstract: More sustainable nuclear power generation might be achieved by combining the passive safety and high temperature applications of the Pebble Bed Reactor (PBR) design with the resource availability and favourable waste characteristics of the thorium fuel cycle. It has already been known that breeding can be achieved with the thorium fuel cycle inside a Pebble Bed Reactor if reprocessing is performed. This is also demonstrated in this work for a cylindrical core with a central driver zone, with 3 g heavy metal pebbles for enhanced fission, surrounded by a breeder zone containing 30 g thorium pebbles, for enhanced conversion. The main question of the present work is whether it is also possible to combine passive safety and breeding, within a practical operating regime, inside a thorium Pebble Bed Reactor. Therefore, the influence of several fuel design, core design and operational parameters upon the conversion ratio and passive safety is evaluated. A Depressurized Loss of Forced Cooling (DLOFC) is considered the worst safety scenario that can occur within a PBR. So, the response to a DLOFC with and without scram is evaluated for several breeder PBR designs using a coupled DALTON/THERMIX code scheme. With scram it is purely a heat transfer problem (THERMIX) demonstrating the decay heat removal capability of the design. In case control rods cannot be inserted, the temperature feedback of the core should also be able to counterbalance the reactivity insertion by the decaying xenon without fuel temperatures exceeding 1600 °C. Results show that high conversion ratios (CR > 0.96) and passive safety can be combined in

Safe operation of critical assemblies and research reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1960-09-15

Some countries have accumulated considerable experience in the operation of these reactors and have in the process developed safe practices. On the other hand, other countries which have recently acquired, or will soon acquire, such reactors do not have sufficient background of experience with them to have developed full knowledge regarding their safe operation. In this situation, the International Atomic Energy Agency has considered that it would be useful to make available to all its Member States a set of recommendations on the safe operation of these reactors, based on the accumulated experience and best practices. The Director General accordingly nominated a Pane Ion Safe Operation of Critical Assemblies and Research Reactors to assist the Agency's Secretariat in drafting such recommendations

18 years experience on UF{sub 6} handling at Japanese nuclear fuel manufacturer

Energy Technology Data Exchange (ETDEWEB)

Fujinaga, H.; Yamazaki, N.; Takebe, N. [Japan Nucelar Fuel Conversion Co., Ltd., Ibaraki (Japan)

1991-12-31

In the spring of 1991, a leading nuclear fuel manufacturing company in Japan, celebrated its 18th anniversary. Since 1973, the company has produced over 5000 metric ton of ceramic grade UO{sub 2} powder to supply to Japanese fabricators, without major accident/incident and especially with a successful safety record on UF{sub 6} handling. The company`s 18 years experience on nuclear fuel manufacturing reveals that key factors for the safe handling of UF{sub 6} are (1) installing adequate facilities, equipped with safety devices, (2) providing UF{sub 6} handling manuals and executing them strictly, and (3) repeating on and off the job training for operators. In this paper, equipment and the operation mode for UF{sub 6} processing at their facility are discussed.

Using mobile technology to promote safe sex and sexual health in adolescents: current practices and future recommendations

Directory of Open Access Journals (Sweden)

Cornelius JB

2016-04-01

Full Text Available Judith B Cornelius,1 Josephine A Appiah2 1School of Nursing, 2Health Services Research Doctoral Program, College of Health and Human Services, University of North Carolina at Charlotte, Charlotte, NC, USA Abstract: Youth and young adults (19–24 years of age shoulder the burden of sexually transmitted infections accounting for nearly half of all new infections annually. Mobile technology is one way that we have reached this population with safer sex information but challenges exist with the delivery process. The literature between 2010 and 2015 was reviewed for data on safe sex and sexual health information delivered using mobile cell phone devices. A search for relevant databases revealed that 17 articles met our inclusion criteria. Findings suggest that mobile cell phone interventions are an effective mode for delivering safe sex and sexual health information to youth; those at the highest risk may not be able to access cell phones based on availability and cost of the text messages or data plans. Keywords: mobile, safe sex, sexual health, practices, recommendations

78 FR 34589 - Descriptive Designation for Needle- or Blade-Tenderized (Mechanically Tenderized) Beef Products

Science.gov (United States)

2013-06-10

... that 15% of consumers changed their behavior based on reading safe handling instruction labels...-1325.) \\19\\ Bruhn (1997) shows that 17% of consumers changed their behavior based on reading safe... practices. Safe Handling Labels and Consumer Behavior in the Southern U.S. \\21\\ Cates, Sheryl C., Cignetti...

Reliability and Validity of a Questionnaire to Measure Consumer Knowledge regarding Safe Practices to Prevent Microbiological Contamination in Restaurants

Science.gov (United States)

Uggioni, Paula Lazzarin; Salay, Elisabette

2013-01-01

Objective: The objective of this study was to develop a validated and reliable questionnaire to measure consumer knowledge regarding safe practices to prevent microbiological contamination in restaurants and commercial kitchens. Methods: Non-probabilistic samples of individuals were interviewed in the city of Campinas, Brazil. Questionnaire items…

Structural Design of Systems with Safe Behavior under Single and Multiple Faults

DEFF Research Database (Denmark)

Blanke, Mogens; Staroswiecki, Marcel

2006-01-01

Handling of multiple simultaneous faults is a complex issue in fault-tolerant control. The design task is particularly made difficult by to the numerous different cases that need be analyzed. Aiming at safe fault-handling, this paper shows how structural analysis can be applied to find...... to structural analysis to disclose which faults could be isolated from a structural point of view using active fault isolation. Results from application on a marine control system illustrate the concepts....... the analytical redundancy relations for all relevant combinations of faults, and can cope with the complexity and size of a real system. Being essential for fault-tolerant control schemes that shall handle particular cases of faults/failures, fault isolation is addressed. The paper introduces an extension...

Harvesting and handling agricultural residues for energy

Energy Technology Data Exchange (ETDEWEB)

Jenkins, B.M.; Summer, H.R.

1986-05-01

Significant progress in understanding the needs for design of agricultural residue collection and handling systems has been made but additional research is required. Recommendations are made for research to (a) integrate residue collection and handling systems into general agricultural practices through the development of multi-use equipment and total harvest systems; (b) improve methods for routine evaluation of agricultural residue resources, possibly through remote sensing and image processing; (c) analyze biomass properties to obtain detailed data relevant to engineering design and analysis; (d) evaluate long-term environmental, social, and agronomic impacts of residue collection; (e) develop improved equipment with higher capacities to reduce residue collection and handling costs, with emphasis on optimal design of complete systems including collection, transportation, processing, storage, and utilization; and (f) produce standard forms of biomass fuels or products to enhance material handling and expand biomass markets through improved reliability and automatic control of biomass conversion and other utilization systems. 118 references.

Preliminary definition of the remote handling system for the current IFMIF Test Facilities

Energy Technology Data Exchange (ETDEWEB)

Queral, V., E-mail: vicentemanuel.queral@ciemat.es [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain); Urbon, J. [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain); Instituto de Fusion Nuclear, Universidad Politecnica de Madrid, 28006 Madrid (Spain); Garcia, A.; Cuarental, I.; Mota, F. [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain); Micciche, G. [CR ENEA Brasimone, I-40035 Camugnano (BO) (Italy); Ibarra, A. [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain); Rapisarda, D. [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain); Instituto de Fusion Nuclear, Universidad Politecnica de Madrid, 28006 Madrid (Spain); Casal, N. [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain)

2011-10-15

A coherent design of the remote handling system with the design of the components to be manipulated is vital for reliable, safe and fast maintenance, having a decisive impact on availability, occupational exposures and operational cost of the facility. Highly activated components in the IFMIF facility are found at the Test Cell, a shielded pit where the samples are accurately located. The remote handling system for the Test Cell reference design was outlined in some past IFMIF studies. Currently a new preliminary design of the Test Cell in the IFMIF facility is being developed, introducing important modifications with respect to the reference one. This recent design separates the previous Vertical Test Assemblies in three functional components: Test Modules, shielding plugs and conduits. Therefore, it is necessary to adapt the previous design of the remote handling system to the new maintenance procedures and requirements. This paper summarises such modifications of the remote handling system, in particular the assessment of the feasibility of a modified commercial multirope crane for the handling of the weighty shielding plugs for the new Test Cell and a quasi-commercial grapple for the handling of the new Test Modules.

Preliminary definition of the remote handling system for the current IFMIF Test Facilities

International Nuclear Information System (INIS)

Queral, V.; Urbon, J.; Garcia, A.; Cuarental, I.; Mota, F.; Micciche, G.; Ibarra, A.; Rapisarda, D.; Casal, N.

2011-01-01

A coherent design of the remote handling system with the design of the components to be manipulated is vital for reliable, safe and fast maintenance, having a decisive impact on availability, occupational exposures and operational cost of the facility. Highly activated components in the IFMIF facility are found at the Test Cell, a shielded pit where the samples are accurately located. The remote handling system for the Test Cell reference design was outlined in some past IFMIF studies. Currently a new preliminary design of the Test Cell in the IFMIF facility is being developed, introducing important modifications with respect to the reference one. This recent design separates the previous Vertical Test Assemblies in three functional components: Test Modules, shielding plugs and conduits. Therefore, it is necessary to adapt the previous design of the remote handling system to the new maintenance procedures and requirements. This paper summarises such modifications of the remote handling system, in particular the assessment of the feasibility of a modified commercial multirope crane for the handling of the weighty shielding plugs for the new Test Cell and a quasi-commercial grapple for the handling of the new Test Modules.

How to handle topography in practical geoid determination: three examples

DEFF Research Database (Denmark)

Omang, O.C.D.; Forsberg, René

2000-01-01

Three different methods of handling topography in geoid determination were investigated. The first two methods employ the residual terrain model (RTM) remove-restore technique, yielding the quasi-geoid, whereas the third method uses the classical Helmert condensation method, yielding the geoid. All...

Handling Practices During Distribution of Kinnow-Mandarins (Citrus nobilis x Citrus deliciosa Used for Preparation of Fresh-Squeezed Juices and their Effects on Microbiological Safety

Directory of Open Access Journals (Sweden)

M. Ghosh

2005-01-01

Full Text Available The objective of this study was to assess the microbiological safety of Kinnow-mandarins (Citrus nobilis X Citrus deliciosa used for preparation of fresh squeezed juices by street vendors. One hundred and fifty Kinnow mandarin samples were collected from different points in the distribution chain from the same lot, washed and aliquots of the wash samples were analyzed for total aerobes, Staphylococcus, total and fecal coliforms, Salmonella and Shigella. Although, there was no notable increase in the total aerobic, total or fecal coliform counts, total staphylococcal counts increased significantly (P<0.05 during distribution to street vendors; seventy-two samples from the street vendors showed the presence of coagulase positive Staphylococcus aureus, twenty-three of these produced enterotoxins B and C. Salmonella and Shigella were not detected in any of the samples. Sources of high numbers of enterotoxigenic S. aureus were traced to unhygienic manual handling by middle level buyers and by street vendors. The results of our study demonstrate the poor microbiological quality of Kinnow-mandarins, the possible entry points of contaminants in the distribution chain of these fruits and unhygienic vending practices. Appropriate intervention measures are needed to ensure safe fresh squeezed juices for consumers.

An Automated Safe-to-Mate (ASTM) Tester

Science.gov (United States)

Nguyen, Phuc; Scott, Michelle; Leung, Alan; Lin, Michael; Johnson, Thomas

2013-01-01

Safe-to-mate testing is a common hardware safety practice where impedance measurements are made on unpowered hardware to verify isolation, continuity, or impedance between pins of an interface connector. A computer-based instrumentation solution has been developed to resolve issues. The ASTM is connected to the circuit under test, and can then quickly, safely, and reliably safe-to-mate the entire connector, or even multiple connectors, at the same time.

Regulatory inspection practices for industrial safety (electrical, mechanical, material handling and conventional aspects)

International Nuclear Information System (INIS)

Agarwal, K.

2017-01-01

Regulatory Inspection (RI) of BARC facilities and projects are carried out under the guidance of BARC Safety Council (BSC) Secretariat. Basically facilities and projects have been divided into two board categories viz. radiological facilities and non-radiological facilities. The Rls of radiological facilities should be carried out under OPSRC and of non-radiological facilities under CFSRC. Periodicity of inspection shall be at least once in a year. The RI of projects is carried out under concerned DSRC. RI practices with industrial safety which includes electrical, mechanical, material handling and conventional aspect for these facilities starts with check lists. The inspection areas are prepared in the form of checklists which includes availability of approved documents, compliance status of previous RIT and various safety committee's recommendations, radiological status of facilities, prompt reporting of safety related unusual occurrences, major incident, site visit for verification of actual status of system/plant. The practices for inspection in the area of electrical safety shall include checking of maintenance procedure for all critical class IV system equipment's such as HT panel, LT panel, transformer and motors. Load testing of Class III system such as D.G. set etc. shall be carried out as technical specification surveillance schedule. Status of aviation lights, number of qualified staff, availability of qualified staff etc. shall be form of inspection

Safe injections and waste management at a Sub-Saharan regional ...

African Journals Online (AJOL)

Objective: To assess the knowledge and practice of safe injections and health care waste management among healthcare workers at a regional hospital in Northern Tanzania. Design: A cross sectional descriptive study with additional observations was conducted to assess the knowledge and practice of safe injections and ...

Radiological safety aspects of handling plutonium

International Nuclear Information System (INIS)

Sundararajan, A.R.

2016-01-01

Department of Atomic Energy in its scheme of harnessing the nuclear energy for electrical power generation and strategic applications has given a huge role to utilization of plutonium. In the power production programme, fast reactors with plutonium as fuel are expected to play a major role. This would require establishing fuel reprocessing plants to handle both thermal and fast reactor fuels. So in the nuclear fuel cycle facilities variety of chemical, metallurgical, mechanical operations have to be carried out involving significant inventories of "2"3"9 Pu and associated radionuclides. Plutonium is the most radiotoxic radionuclide and therefore any facility handling it has to be designed and operated with utmost care. Two problems of major concern in the protection of persons working in plutonium handling facilities are the internal exposure to the operating personnel from uptake of plutonium and transplutonic nuclides as they are highly radiotoxic and the radiation exposure of hands and eye lens during fuel fabrication operations especially while handling recycled high burn up plutonium. In view of the fact that annual limit for intake is very small for "2"3"9Pu and its radiation emission characteristics are such that it is a huge challenge for the health physicists to detect Pu in air and in workers. This paper discusses the principles and practices followed in providing radiological surveillance to workers in plutonium handling areas. The challenges in protecting the workers from receiving exposures to hands and eye lens in handling high burn up plutonium are also discussed. The sites having Pu fuel cycle facilities should have trained medical staff to handle cases involving excessive intake of plutonium. (author)

Technical session 4: Health and safety issues. Working environment control in beryllium handling area

International Nuclear Information System (INIS)

Yonehara, K.; Natori, Y.; Tatenuma, K.; Nakamichi, Masaru

2016-01-01

Beryllium (Be) and its intermetallic compound (beryllide) are recommended from Japan as the most promising solid neutron multiplier for nuclear fusion power plant. The shape as the neutron multiplier is small sphere (pebble), and the mass production technology of it must be developed urgently. Beryllium is the substance regulated by the law of Ordinance on Prevention of Hazards Due to Specified the Chemical Substances Control. We'll report on a way of the operational environmental management to make a safe Be handling area for the Be handling researchers and workers. (author)

Development and evaluation of online video teaching resources to enhance student knowledge of livestock handling.

Science.gov (United States)

Klupiec, C; Pope, S; Taylor, R; Carroll, D; Ward, M H; Celi, P

2014-07-01

To evaluate the effectiveness of online audiovisual materials to support the acquisition of animal handling skills by students of veterinary and animal science. A series of video clips (Livestock Handling modules) demonstrating livestock handling procedures was created and delivered online to students enrolled in the Faculty of Veterinary Science, University of Sydney. The effectiveness of these modules for supporting student learning was evaluated via an online survey. The survey also sought feedback on how students could be better prepared for handling livestock. The survey indicated that students found the videos a useful part of their learning experience, particularly by familiarising them with correct handling procedures and emphasising the importance of safety when handling livestock. Students also highlighted that online delivery supported flexible learning. Suggested improvements of the Livestock Handling modules centred around broadening the content of the videos and improving the user-friendliness of online access. Student feedback regarding how the Faculty could better prepare them for livestock handling was dominated by requests for more opportunities to practise animal handling using live animals. The Livestock Handling audiovisual tool is a valuable supplementary resource for developing students' proficiency in safe and effective handling of livestock. However, the results also clearly reveal a perception by students that more hands-on experience is required for acquisition of animal handling skills. These findings will inform future development of the Faculty's animal handling program. © 2014 Australian Veterinary Association.

A high intensity beam handling system at the KEK-PS new experimental hall

International Nuclear Information System (INIS)

Tanaka, K.H.; Minakawa, M.; Yamanoi, Y.

1991-01-01

We would like to summarize newly developed technology for handling high-intensity beams. This was practically employed in the beam-handling system of primary protons at the KEK-PS new experimental hall. (author)

Generic Planning and Control of Automated Material Handling Systems: Practical Requirements Versus Existing Theroy.

NARCIS (Netherlands)

Haneyah, S.W.A.; Zijm, Willem H.M.; Schutten, Johannes M.J.; Schuur, Peter

2011-01-01

This paper discusses the problem of generic planning and control of Automated Material Handling Systems (AMHSs). The paper illustrates the relevance of this research direction, and then addresses three different market sectors where AMHSs are used. These market sectors are: baggage handling,

Generic planning and control of automated material handling systems : practical requirements versus existing theory

NARCIS (Netherlands)

Haneyah, S.W.A.; Schutten, Johannes M.J.; Schuur, Peter; Zijm, Willem H.M.

2013-01-01

This paper discusses the problem to design a generic planning and control architecture for utomated material handling systems (AMHSs). We illustrate the relevance of this research direction, and then address three different market sectors where AMHSs are used, i.e., baggage handling, distribution,

Clinical solid waste management practices and its impact on human health and environment - A review

International Nuclear Information System (INIS)

Hossain, Md. Sohrab; Santhanam, Amutha; Nik Norulaini, N.A.; Omar, A.K. Mohd

2011-01-01

Research highlights: → Appropriate waste management technology for safe handling and disposal of clinical solid waste. → Infectious risk assessment on unsafe handling of clinical solid waste. → Recycling-reuse program of clinical solid waste materials. → Effective sterilization technology to reduce exposure of infectious risk. - Abstract: The management of clinical solid waste (CSW) continues to be a major challenge, particularly, in most healthcare facilities of the developing world. Poor conduct and inappropriate disposal methods exercised during handling and disposal of CSW is increasing significant health hazards and environmental pollution due to the infectious nature of the waste. This article summarises a literature review into existing CSW management practices in the healthcare centers. The information gathered in this paper has been derived from the desk study of open literature survey. Numerous researches have been conducted on the management of CSW. Although, significant steps have been taken on matters related to safe handling and disposal of the clinical waste, but improper management practice is evident from the point of initial collection to the final disposal. In most cases, the main reasons of the mismanagement of CSW are the lack of appropriate legislation, lack of specialized clinical staffs, lack of awareness and effective control. Furthermore, most of the healthcare centers of the developing world have faced financial difficulties and therefore looking for cost effective disposal methods of clinical waste. This paper emphasizes to continue the recycle-reuse program of CSW materials after sterilization by using supercritical fluid carbon dioxide (SF-CO2) sterilization technology at the point of initial collection. Emphasis is on the priority to inactivate the infectious micro-organisms in CSW. In that case, waste would not pose any threat to healthcare workers. The recycling-reuse program would be carried out successfully with the non

Exploring Reflective Means to Handle Plagiarism

Science.gov (United States)

Dalal, Nikunj

2016-01-01

Plagiarism has become widespread in the university teaching environment. This article presents practical wisdom from several years of experience handling plagiarism in two Information Systems (IS) courses with the exploratory use of reflective means such as dialogues and essays. There has been very little work on the use of reflective approaches…

Thermodynamic processes associated with frostbite in the handling of liquid nitrogen

Science.gov (United States)

Johnson, W. L.; Cook, C. R.

2014-01-01

It is often taught that exposure to liquid nitrogen will cause frostbite or more severe damage to exposed skin tissue. However, it is also demonstrated that a full hand can be briefly immersed in liquid nitrogen without damage. To better understand and possibly visualize the effects of human tissue exposure to liquid nitrogen, a series of tests were conducted using simulated hands and arms composed of molded gelatin forms. The simulated hands and arms were immersed, sprayed, or splashed with liquid nitrogen both with and without state of the art personal protective equipment. Thermocouples were located within the test articles to allow for thermal mapping during the freezing process. The study is aimed to help understand frostbite hazards and the time constants involved with the handling of liquid nitrogen to improve future safety protocols for the safe handling of cryogenic fluids. Results of the testing also show the limits to handling liquid nitrogen while using various means of protection.

Thermodynamic processes associated with frostbite in the handling of liquid nitrogen

Energy Technology Data Exchange (ETDEWEB)

Johnson, W. L. [Cryogenics Test Laboratory, NASA Kennedy Space Center, Kennedy Space Center, FL, 32899 (United States); Cook, C. R. [Dept. Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL, 32611 (United States)

2014-01-29

It is often taught that exposure to liquid nitrogen will cause frostbite or more severe damage to exposed skin tissue. However, it is also demonstrated that a full hand can be briefly immersed in liquid nitrogen without damage. To better understand and possibly visualize the effects of human tissue exposure to liquid nitrogen, a series of tests were conducted using simulated hands and arms composed of molded gelatin forms. The simulated hands and arms were immersed, sprayed, or splashed with liquid nitrogen both with and without state of the art personal protective equipment. Thermocouples were located within the test articles to allow for thermal mapping during the freezing process. The study is aimed to help understand frostbite hazards and the time constants involved with the handling of liquid nitrogen to improve future safety protocols for the safe handling of cryogenic fluids. Results of the testing also show the limits to handling liquid nitrogen while using various means of protection.

Thermodynamic processes associated with frostbite in the handling of liquid nitrogen

International Nuclear Information System (INIS)

Johnson, W. L.; Cook, C. R.

2014-01-01

It is often taught that exposure to liquid nitrogen will cause frostbite or more severe damage to exposed skin tissue. However, it is also demonstrated that a full hand can be briefly immersed in liquid nitrogen without damage. To better understand and possibly visualize the effects of human tissue exposure to liquid nitrogen, a series of tests were conducted using simulated hands and arms composed of molded gelatin forms. The simulated hands and arms were immersed, sprayed, or splashed with liquid nitrogen both with and without state of the art personal protective equipment. Thermocouples were located within the test articles to allow for thermal mapping during the freezing process. The study is aimed to help understand frostbite hazards and the time constants involved with the handling of liquid nitrogen to improve future safety protocols for the safe handling of cryogenic fluids. Results of the testing also show the limits to handling liquid nitrogen while using various means of protection

Handling reality: three paths to understanding the knowledge society

Directory of Open Access Journals (Sweden)

Daniel Muriel

2009-11-01

Full Text Available The "knowledge society" hypothesis is a useful heuristic for understanding contemporary society after the crisis of modernity that arose in the second half of the 20th century.  I shall examine the ways in which reality can be handled (reality handlings, that is, all those material-semiotic practices  through which we try to influence the world that surrounds us. I shall focus especially on the epistemological problems of current scientific and political practices.  I conclude with three specific, but not mutually exclusive avenues that might (or might not help us fully articulate the idea of the "knowledge society": the modern-sociological, the actantial-articulative, and the genealogical.  

Unique and massive Chernobyl cranes for deconstruction activities in the new safe confinement

International Nuclear Information System (INIS)

Parameswaran, N. A. Vijay; Chornyy, Igor; Owen, Rob; Saint Victor, Francois de

2013-01-01

On 26 April 1986, the worst nuclear power plant accident in history occurred at the Chernobyl plant in Ukraine (then part of the Soviet Union). The destruction of Unit 4 sent highly radioactive fallout over Belarus, Russia, Ukraine, and Europe. The object shelter-a containment sarcophagus-was built in November 1986 to limit exposure to radiation. However, it has only a planned 25-year lifespan and would probably not survive even a moderate seismic event in a region that has more than its share of such events. It was time to take action. One of the largest tasks that are in progress is the design and construction of the New Safe Confinement (NSC). The NSC is an engineered enclosure for the entire object shelter that includes a suite of process equipment. The process equipment will be used for the dismantling of the destroyed Chernobyl Nuclear Power Plant Unit. One of the major mechanical handling systems to be installed in the new safe confinement is the Main Cranes System. The planned decontamination and decommissioning or dismantling activities will require the handling of heavily shielded waste disposal casks containing nuclear fuel as well as lifting and transporting extremely large structural elements. These activities, to be performed within the new safe confinement, will require large and sophisticated cranes. The article will focus on the current progress of the new safe confinement and of the main cranes system for the decommissioning or dismantling activities. (authors)

Unique and massive Chernobyl cranes for deconstruction activities in the new safe confinement

Energy Technology Data Exchange (ETDEWEB)

Parameswaran, N. A. Vijay; Chornyy, Igor [Bechtel Systems and Infrastructure, Inc., Chernobyl Project-SIP-PMU, 7/1, Gvardeyskoy div. Str., Kiev Region, Slavutich, 07101 (Ukraine); Owen, Rob [PaR Systems, Inc., 707 Country Road E West, Shoreview, Minnesota 55126-7007 (United States); Saint Victor, Francois de [Bouygues Travaux Publics Challenger, 1, avenue Eugene Freyssinet, Guyancourt, 78601 St-Quentin-en-Yvelines (France)

2013-07-01

On 26 April 1986, the worst nuclear power plant accident in history occurred at the Chernobyl plant in Ukraine (then part of the Soviet Union). The destruction of Unit 4 sent highly radioactive fallout over Belarus, Russia, Ukraine, and Europe. The object shelter-a containment sarcophagus-was built in November 1986 to limit exposure to radiation. However, it has only a planned 25-year lifespan and would probably not survive even a moderate seismic event in a region that has more than its share of such events. It was time to take action. One of the largest tasks that are in progress is the design and construction of the New Safe Confinement (NSC). The NSC is an engineered enclosure for the entire object shelter that includes a suite of process equipment. The process equipment will be used for the dismantling of the destroyed Chernobyl Nuclear Power Plant Unit. One of the major mechanical handling systems to be installed in the new safe confinement is the Main Cranes System. The planned decontamination and decommissioning or dismantling activities will require the handling of heavily shielded waste disposal casks containing nuclear fuel as well as lifting and transporting extremely large structural elements. These activities, to be performed within the new safe confinement, will require large and sophisticated cranes. The article will focus on the current progress of the new safe confinement and of the main cranes system for the decommissioning or dismantling activities. (authors)

Ergonomics of disposable handles for minimally invasive surgery.

Science.gov (United States)

Büchel, D; Mårvik, R; Hallabrin, B; Matern, U

2010-05-01

The ergonomic deficiencies of currently available minimally invasive surgery (MIS) instrument handles have been addressed in many studies. In this study, a new ergonomic pistol handle concept, realized as a prototype, and two disposable ring handles were investigated according to ergonomic properties set by new European standards. In this study, 25 volunteers performed four practical tasks to evaluate the ergonomics of the handles used in standard operating procedures (e.g., measuring a suture and cutting to length, precise maneuvering and targeting, and dissection of a gallbladder). Moreover, 20 participants underwent electromyography (EMG) tests to measure the muscle strain they experienced while carrying out the basic functions (grasp, rotate, and maneuver) in the x, y, and z axes. The data measured included the number of errors, the time required for task completion, perception of pressure areas, and EMG data. The values for usability in the test were effectiveness, efficiency, and user satisfaction. Surveys relating to the subjective rating were completed after each task for each of the three handles tested. Each handle except the new prototype caused pressure areas and pain. Extreme differences in muscle strain could not be observed for any of the three handles. Experienced surgeons worked more quickly with the prototype when measuring and cutting a suture (approximately 20%) and during precise maneuvering and targeting (approximately 20%). On the other hand, they completed the dissection task faster with the handle manufactured by Ethicon. Fewer errors were made with the prototype in dissection of the gallbladder. In contrast to the handles available on the market, the prototype was always rated as positive by the volunteers in the subjective surveys. None of the handles could fulfil all of the requirements with top scores. Each handle had its advantages and disadvantages. In contrast to the ring handles, the volunteers could fulfil most of the tasks more

Assessment of dose using TLD during activity handling at RPhL, BRIT

International Nuclear Information System (INIS)

Choughule, Nitin V.; Bairwa, S.M.; Murali, S.; Rakesh, R.B.; Madhumita, B.; Adtani, M.M.; Mehra, Kiran; Padmanabhan, D.; Borkute, S.D.; Pal, N.; Sachdev, S.S.

2012-01-01

Radiopharmaceutical Lab (RPhL), BRIT undertakes production, supply of radiopharmaceuticals. At RPhL short lived isotopes 131 I, 99 Mo, 99m Tc, 125 I, 153 Sm, 32 P and 51 Cr, are handled with total activity handled per week ranging from MBq to TBq (mCiCi). Radiological survey provides idea on radiation level helps to ensure safe working condition. In order to improve the working condition and to estimate the integrated dose over a period of week with uniform pattern of activity handling in the period, a study was carried out using TLD badges. Specifically prepared TLD badges containing CaSO 4 :Dy phosphor were placed at various locations at RPhL It is used for personnel monitoring. One set of TLD was exposed for a week long period while the other set was exposed only during activity handling, kept in the lead pot during the rest of the period. Dose measured by TLDs were compared with the dose estimated using the survey data for the respective locations as well as with the dose estimated using the activity handled by taking into account the time, distance and shielding. The maximum radiation level recorded during lab survey was used to estimate the TLD exposure during the period. It was observed that results on TLD dose measurement and estimated doses using survey results were of same order. The cumulative TLD dose recorded for week duration (168 h) was significantly higher than doses recorded by exposed TLD only during activity handling (8 h). It was expected that the TLD dose would not be more than dose estimated using radiation survey data, while in 3 among 8 experimental TLDs, the dose was ∼ 25% higher. This could be due to the movement of active material or open handling of activity do not get reflected during normal radiation survey and contribution from background radiation at the lab where those TLDs were placed. The individual dose of all the personnel working in different labs were well within the relevant dose limits indicating the safe working condition

Elaboration of Safe Community Assessment System

Directory of Open Access Journals (Sweden)

Birutė Mikulskienė

2013-08-01

Full Text Available The paper aims to design an assessment system to monitor and evaluate safety parameters and administrative efforts with the purpose to increase safety in municipalities. The safety monitoring system considered is to be the most important tool for creation and development of safe communities in Lithuania. Several methods were applied to achieve this purpose. In order to determine the role of local government in ensuring the safety of people, property and environment at the local level of a meta-analysis of research reports, the Lithuanian national legislation, strategic planning documents of the state and local government were carried out. Analysis of statistical data, structural analysis, comparative analysis and synthesis methods were used while investigating the areas of safety uncertainty, risk groups, identifying safety risk factors, determining their relationship, and creating a safe community assessment system. A safe community assessment system, which consists of two types of criteria, has been elaborated. The assessment system is based on the multi-level criteria for safety monitoring and the multi-level criteria for the evaluation of municipal activities in the field of building safety. Links between the criteria, peculiarities of their application and advantages in the process of safe community creation and development are analyzed. Design and implementation of the safe community assessment system is one of the most important stages to implement the idea of safe communities. The proposed system integrates a variety of risk areas, the safety achievement criteria are linked to the criteria used in the strategic planning. Periodic assessment of the safety situation using the proposed system ensures possibility to monitor current local safety conditions and assess the changes and the trends. A safe community assessment system is proposed to be used as a tool to unified municipalities safety comprehensiveness and compare safety level in

Elaboration of Safe Community Assessment System

Directory of Open Access Journals (Sweden)

Algirdas Astrauskas

2011-12-01

Full Text Available The paper aims to design an assessment system to monitor and evaluate safety parameters and administrative efforts with the purpose to increase safety in municipalities. The safety monitoring system considered is to be the most important tool for creation anddevelopment of safe communities in Lithuania. Several methods were applied to achieve this purpose. In order to determine the role of local government in ensuring the safety of people, property and environment at the local level of a meta-analysis of research reports,the Lithuanian national legislation, strategic planning documents of the state and local government were carried out. Analysis of statistical data, structural analysis, comparative analysis and synthesis methods were used while investigating the areas of safety uncertainty, risk groups, identifying safety risk factors, determining their relationship, and creating a safe community assessment system.A safe community assessment system, which consists of two types of criteria, has been elaborated. The assessment system is based on the multi-level criteria for safety monitoring and the multi-level criteria for the evaluation of municipal activities in the field of building safety. Links between the criteria, peculiarities of their application and advantages in the process of safe community creation and development are analyzed.Design and implementation of the safe community assessment system is one of the most important stages to implement the idea of safe communities. The proposed system integrates a variety of risk areas, the safety achievement criteria are linked to the criteria used in thestrategic planning. Periodic assessment of the safety situation using the proposed system ensures possibility to monitor current local safety conditions and assess the changes and the trends. A safe community assessment system is proposed to be used as a tool to unified municipalities safety comprehensiveness and compare safety level in

Peer coaching and mentoring: a new model of educational intervention for safe patient handling in health care.

Science.gov (United States)

Alamgir, Hasanat; Drebit, Sharla; Li, Helen Guiyun; Kidd, Catherine; Tam, Helen; Fast, Catherine

2011-08-01

To reduce the risk of patient handling-related musculoskeletal injury, overhead ceiling lifts have been installed in health care facilities. To increase ceiling lift usage for a variety of patient handling tasks, a peer coaching and mentoring program was implemented among the direct care staff in the long-term care subsector in British Columbia, Canada. They received a 4-day training program on body mechanics, ergonomics, patient-handling techniques, ceiling lift usage, in addition to coaching skills. A questionnaire was administered among staff before and after the intervention to evaluate the program's effectiveness. There were 403 and 200 respondents to the pre-intervention and post-intervention questionnaires. In general, staff perceived the peer-coaching program to be effective. The number of staff who reported to be using ceiling lifts "often and always" went higher from 64.5% to 80.5% (<0.001) after coaching program implementation. Furthermore, staff reported that they were using the ceiling lifts for more types of tasks post-intervention. Staff reported that the peer coaching program has increased their safety awareness at work and confidence in using the ceiling lifts. The findings suggest that this educational model can increase the uptake of mechanical interventions for occupational health and safety initiatives. It appears that the training led to a greater awareness of the availability of or increased perceptions of the number of ceiling lifts, presumably through coaches advocating their use. Copyright © 2011 Wiley-Liss, Inc.

Shielded enclosure for handling radioactive material

International Nuclear Information System (INIS)

Laurent, H.; Courouble, J.M.

1959-01-01

Two enclosures linked by an air-lock are described: they are designed for the safe handling of 5 curies 0.3 to 0.5 MeV γ emitters, and each is composed of a semi-tight case, ventilated, clad in 80 mm steel plate, and suited for a wide variety of physics and chemistry operations. The equipment required for any given operation can be installed in the shortest possible time, access to the enclosure being via a removable front. Visual control is assured through a lead-glass screen. Each enclosure is fitted with a master-slave manipulator, Argon model 7, and plugs and air-locks are provided for the introduction of liquids and solids. (author) [fr

Food Leftover Practices among Consumers in Selected Countries in Europe, South and North America.

Science.gov (United States)

Koppel, Kadri; Higa, Federica; Godwin, Sandria; Gutierrez, Nelson; Shalimov, Roman; Cardinal, Paula; Di Donfrancesco, Brizio; Sosa, Miriam; Carbonell-Barrachina, Angel A; Timberg, Loreida; Chambers, Edgar

2016-09-21

Foodborne illnesses may be related to many food production factors with home practices of consumers playing an important role in food safety. Consumer behavior for handling food leftovers has been studied, however little work on comparisons among countries has been published. The objective of this study was to investigate home food leftover practices of people from North American, South American, and European countries. Surveys were conducted with approximately 100 or more consumers in Argentina, Colombia, the United States, Estonia, Italy, Russia, and Spain. The participants responded to questions related to the length of time different types of food leftovers; such as meat, fresh salads, or restaurant dishes would be kept refrigerated or would be left at room temperature before refrigeration. Researchers also investigated how consumers would determine if the food was still safe for consumption. Potentially risky behaviors were observed in all seven countries. For instance, 55.8% of Estonians, 25% of Russians and 25.8% of Argentinean participants left food out at room temperature for several hours before storing in the refrigerator. Furthermore, 25%-29% of Colombian, Estonian, and Spanish consumers would look, smell, and taste leftovers to determine its probable safety. Correct handling of leftovers is an important aspect of consumer food safety. Although the surveys cannot be representative of all consumers in each country, they do provide an initial overview of comparative practices for handling leftovers among different countries. This provides government and educators with information on potential universal and unique consumer food safety issues related to handling leftover foods among various countries.

The Institute for Safe Medication Practices and Poison Control Centers: Collaborating to Prevent Medication Errors and Unintentional Poisonings.

Science.gov (United States)

Vaida, Allen J

2015-06-01

This article provides an overview on the Institute for Safe Medication Practices (ISMP), the only independent nonprofit organization in the USA devoted to the prevention of medication errors. ISMP developed the national Medication Errors Reporting Program (MERP) and investigates and analyzes errors in order to formulate recommendations to prevent further occurrences. ISMP works closely with the US Food and Drug Administration (FDA), drug manufacturers, professional organizations, and others to promote changes in package design, practice standards, and healthcare practitioner and consumer education. By collaborating with ISMP to share and disseminate information, Poison Control centers, emergency departments, and toxicologists can help decrease unintentional and accidental poisonings.

Combating wear in bulk solids handling plants

Energy Technology Data Exchange (ETDEWEB)

1986-01-01

A total of five papers presented at a seminar on problems of wear caused by abrasive effects of materials in bulk handling. Topics of papers cover the designer viewpoint, practical experience from the steel, coal, cement and quarry industries to create an awareness of possible solutions.

Reproductive handle of the herd of cattle of double purpose

International Nuclear Information System (INIS)

Castro Hernandez, A.

1988-01-01

The influence of the environmental factors is analyzed, in the reproductive efficiency of herd cattle of double purpose. The reproductive behavior begins with the gestation of the heifers. Under the conditions of the Colombian tropic these they reach the weight required for the reproduction to an age but late that in the temperate areas. Once the first childbirth, the cow takes place it enters in exhaustion that makes that this animal is the but difficult to reproduce after the childbirth, that which demands special cares of handling and feeding. The interval among the childbirth to evaluate the reproductive efficiency. Environmental factors that influence significantly. The use of the practice simple of handling, health, selection and feeding produces significant increments in the fertility of the herd of cattle of double purpose. One practices of effective handling in the improvement of the reproductive behavior of the cows of double purpose it is the restricted nursing

Handling a challenging context: experiences of facilitating evidence-based elderly care.

Science.gov (United States)

Nygårdh, Annette; Ahlström, Gerd; Wann-Hansson, Christine

2016-03-01

To explore improvement facilitators' experiences of handling their commission to implement evidence-based practice in elderly care for frail older persons. Improvement facilitators were put in place across Sweden in a time-limited project by the government, with one part of the project being to evaluate the model before establishing this facilitation of evidence-based practice in elderly care. Two focus groups were interviewed twice. Each group comprised three respondents. The interviews were analysed using qualitative content analysis. A main theme, 'Moving forward by adjusting to the circumstances', described how the improvement facilitators handle their commitment. Five subthemes emerged: identifying barriers, keeping focus, maintaining motivation, building bridges and finding balance. The improvement facilitators' commitment is ambiguous because of unclear leadership of, and responsibility for the national investment. They have to handle leaders' different approaches and justify the need for evidence-based practice. The improvement facilitators did not reflect on the impact of programme adaptations on evidence-based practice. The findings emphasise the need for collaboration between the improvement facilitator and the nurse manager. To fully implement evidence-based practice, negotiations with current practitioners for adaptation to local conditions are necessary. Furthermore, the value of improving organisational performance needs to be rigorously communicated throughout the organisation. © 2015 The Authors. Journal of Nursing Management Published by John Wiley & Sons Ltd.

Solution for remote handling in accelerator installations

International Nuclear Information System (INIS)

Burgerjon, J.J.; Ekberg, E.L.; Grisham, D.L.; Horne, R.A.; Meyer, R.E.; Flatau, C.R.; Wilson, K.B.

1977-01-01

A description is given of a remote-handling system designed for the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF), versatile enough to be used in a variety of situations found around particle accelerators. The system consists of a bilateral (force-reflecting) servomanipulator installed on an articulated hydraulic boom. The boom also carries the necessary tools and observation devices. The whole slave unit can be moved by crane or truck to the area of operation. A control cable connects the slave unit with the control station, located at a safe distance in a trailer. Various stages of development as well as some operating experience are discussed

Handling of Solid Residues

International Nuclear Information System (INIS)

Medina Bermudez, Clara Ines

1999-01-01

The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

Different ways to handle topography in practical geoid determination

DEFF Research Database (Denmark)

Dahl, O.C.; Forsberg, René

1999-01-01

In this paper two different methods of how to handle topography in geoid determination is investigated. First method employs the Residual Terrain Model (RTM) remove-restore technique and yields the quasigeoid, whereas the second method is the classical Helmert condensation method, yielding...... the topography was represented by either a detailed (100 m) or a coarse (1000 m) digital terrain model. The inclusion of bathymetry in the terrain model was also investigated. Even if two different methods were used, they produced almost identical results at the 5 cm level in the mountains, but small systematic...

Feeling safe and motivated to achieve better health: Experiences with a partnership-based nursing practice programme for in-home patients with chronic obstructive pulmonary disease.

Science.gov (United States)

Leine, Marit; Wahl, Astrid Klopstad; Borge, Christine Råheim; Hustavenes, Magne; Bondevik, Hilde

2017-09-01

To explore chronic obstructive pulmonary disease patients' experiences with a partnership-based nursing practice programme in the home setting. Patients with chronic obstructive pulmonary disease suffer from psychological and physiological problems, especially when they return home after hospitalisation from exacerbation. Many express a need for information and knowledge about chronic obstructive pulmonary disease. Partnership as practice is a patient-centred framework providing an individualised practice for each patient. This study intends to achieve a nuanced and improved understanding of chronic obstructive pulmonary disease patients' experiences with a partnership-based nursing practice programme comprising home visits from a respiratory nurse after hospital discharge, alongside interdisciplinary collaboration. This study has a qualitative design with interviews. Six individual semi-structured interviews collected in 2012-2013 constitute the material. Interviews were recorded, transcribed to written text and analysed using systematic text condensation. Three key themes were identified: to be seen, talked with and understood; healthcare support at home-continuity, practical support and facilitation; and exchange of knowledge. However, there were two generic themes that permeated the material: feeling safe and comforted, and motivation to achieve better health. Patients with chronic obstructive pulmonary disease can experience feeling safe and comforted, and be motivated to make changes in order to achieve better health after participating in a partnership-based nursing practice programme that includes home visits from a respiratory nurse and interdisciplinary cooperation after hospital discharge. To feel safe is of great importance, and how this relates to the patient's ability to cope with illness should be explored in further research. The results suggest that the partnership-based nursing practice programme that includes home visits and interdisciplinary

An electrical pulse hydride injector (EPHI) for reactor fueling and tritium handling applications

International Nuclear Information System (INIS)

Azizov, E.A.; Kareev, Yu.A.; Savotkin, A.N.; Frunze, V.V.; Penzhorn, R.D.; Glugla, M.

1995-01-01

An electrical pulse hydride injector (EPHI) has been developed for reactor fuelling as well as for handling of hydrogen isotopes in facilities operating with tritium. Salient features of the EPHI are the accuracy with which the fuelling rate can be controlled and the avoidance of a pressurized ballast. The generator is simple and allows for safe operation with tritium. (orig.)

Science.gov (United States)

RAJI, A.O.Q.

2014-01-01

Summary Introduction. Food-borne disease outbreaks remain a major global health challenge and cross-contamination from raw meat due to poor handling is a major cause in developing countries. Adequate knowledge of meat handlers is important in limiting these outbreaks. This study evaluated and compared the safe meat-handling knowledge, attitudes and practices (KAP) of private (PMPP) and government meat processing plants' (GMPP) workers in south-western Nigeria. Methods. This cross sectional study comprised 190 meat handlers (PMPP = 55; GMPP = 135). Data concerning their safe meat-handling knowledge, attitudes and practices as well as their socio-demographic characteristics, such as age, gender and work experience were collected. Results. A significant association was observed between the type of meat processing plants and their knowledge (p = 0.000), attitudes (p = 0.000) and practices (p = 0.000) of safe meat-handling. Meat handlers in the GMPP were respectively, about 17 times (OR = 0.060, 95%CI: 0.018-0.203), 57 times (OR = 0.019, 95% CI: 0.007-0.054) and 111 times (OR = 0.009, 95%CI: 0.001- 0.067) less likely to obtain good knowledge, attitude and practice level of safe meat-handling than those from PMPP. Further, KAP levels were significantly associated with age group, education and work experience (p < 0.05). Discussion. Study findings suggest the need for future policy in food industry in developing countries to accommodate increased involvement of private sector for improved food safety and quality delivery. Public health education on safe food handling and hygiene should be on the front burner among food handlers in general. PMID:25916026

Decontamination manual of RI handling laboratory

International Nuclear Information System (INIS)

Wadachi, Yoshiki

2004-01-01

Based on experiences in Japan Atomic Energy Research Institute (JAERI), the essential and practical knowledge of radioactive contamination and its decontamination, and the method and procedure of floor decontamination are described for researcher and managing person in charge of handling radioisotopes (RI) in RI handling laboratories. Essential knowledge concerns the uniqueness of solid surface contamination derived from RI half lives and quantities, surface contamination density limit, and mode/mechanism of contamination. The principle of decontamination is a single conduct with recognition of chemical form of the RI under use. As the practical knowledge, there are physical and chemical methods of solid surface decontamination. The latter involves use of inorganic acids, chelaters and surfactants. Removal and replacement of contaminated solid like floor material are often effective. Distribution mapping of surface contamination can be done by measuring the radioactivity in possibly contaminated areas, and is useful for planning of effective decontamination. Floor surface decontamination is for the partial and spread areas of the floor. It is essential to conduct the decontamination with reagent from the highly to less contaminated areas. Skin decontamination with either neutral detergent or titanium oxide is also described. (N.I.)

Safe injection practices for administration of propofol.

Science.gov (United States)

King, Cecil A; Ogg, Mary

2012-03-01

Sepsis and postoperative infection can occur as a result of unsafe practices in the administration of propofol and other injectable medications. Investigations of infection outbreaks have revealed the causes to be related to bacterial growth in or contamination of propofol and unsafe medication practices, including reuse of syringes on multiple patients, use of single-use medication vials for multiple patients, and failure to practice aseptic technique and adhere to infection control practices. Surveys conducted by AORN and other researchers have provided additional information on perioperative practices related to injectable medications. In 2009, the US Food and Drug Administration and the Centers for Disease Control and Prevention convened a group of clinicians to gain a better understanding of the issues related to infection outbreaks and injectable medications. The meeting participants proposed collecting data to persuade clinicians to adopt new practices, developing guiding principles for propofol use, and describing propofol-specific, site-specific, and practitioner-specific injection techniques. AORN provides resources to help perioperative nurses reduce the incidence of postoperative infection related to medication administration. Copyright © 2012 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Transportation system (TRUPACT) for contact-handled transuranic wastes

International Nuclear Information System (INIS)

Romesberg, L.E.; Pope, R.B.; Burgoyne, R.M.

1982-04-01

Contact-handled transuranic defense waste is being, and will continue to be, moved between a number of locations in the United States. The DOE is sponsoring development of safe, efficient, licensable, and cost-effective transportation systems to handle this waste. The systems being developed have been named TRUPACT which stands for TRansUranic PACkage Transporter. The system will be compatible with Type A packagings used by waste generators, interim storage facilities, and repositories. TRUPACT is required to be a Type B packaging since larger than Type A quantities of some radionuclides (particularly plutonium) may be involved in the collection of Type A packagings. TRUPACT must provide structural and thermal protection to the waste in hypothetical accident environments specified in DOT regulations 49CFR173 and NRC regulations 10CFR71. Preliminary design of the systems has been completed and final design for a truck system is underway. The status of the development program is reviewed in this paper and the reference design is described. Tests that have been conducted are discussed and long-term program objectives are reviewed

Knowledge, Attitude and Practice of Healthcare Managers to Medical Waste Management and Occupational Safety Practices: Findings from Southeast Nigeria.

Science.gov (United States)

Anozie, Okechukwu Bonaventure; Lawani, Lucky Osaheni; Eze, Justus Ndulue; Mamah, Emmanuel Johnbosco; Onoh, Robinson Chukwudi; Ogah, Emeka Onwe; Umezurike, Daniel Akuma; Anozie, Rita Onyinyechi

2017-03-01

Awareness of appropriate waste management procedures and occupational safety measures is fundamental to achieving a safe work environment, and ensuring patient and staff safety. This study was conducted to assess the attitude of healthcare managers to medical waste management and occupational safety practices. This was a cross-sectional study conducted among 54 hospital administrators in Ebonyi state. Semi-structured questionnaires were used for qualitative data collection and analyzed with SPSS statistics for windows (2011), version 20.0 statistical software (Armonk, NY: IBM Corp). Two-fifth (40%) of healthcare managers had received training on medical waste management and occupational safety. Standard operating procedure of waste disposal was practiced by only one hospital (1.9%), while 98.1% (53/54) practiced indiscriminate waste disposal. Injection safety boxes were widely available in all health facilities, nevertheless, the use of incinerators and waste treatment was practiced by 1.9% (1/54) facility. However, 40.7% (22/54) and 59.3% (32/54) of respondents trained their staff and organize safety orientation courses respectively. Staff insurance cover was offered by just one hospital (1.9%), while none of the hospitals had compensation package for occupational hazard victims. Over half (55.6%; 30/54) of the respondents provided both personal protective equipment and post exposure prophylaxis for HIV. There was high level of non-compliance to standard medical waste management procedures, and lack of training on occupational safety measures. Relevant regulating agencies should step up efforts at monitoring and regulation of healthcare activities and ensure staff training on safe handling and disposal of hospital waste.

Safety and availability of the fuel handling system at Embalse nuclear power plant

International Nuclear Information System (INIS)

Santaliz, Jorge O.; Paredes, Juan A.

1998-01-01

The paper attempts the Fuel Handling (F/H) System maintenance and operating methodology at the Embalse Power Station. It doesn't refer to the F/H process, because it's common and well known by all the CANDU Stations. Instead of that, the presentation will be focused on people qualification, training and selection. Also the key subjects for a smooth and successful operation. Additionally will be remarked the human aspect and the role of the person in the organization. The safe and reliable operation of the CNE Fuel Handling System has been always target, supported by the operational experience. The accountability and fitness for the job were the main qualification for the crew members. They have very clear their role and the importance of equipment which they are operating or manipulating. The person who has greater experience and responsibility must struggle continuously to keep the safe and confident operation. Also we have to increase permanently our knowledge with a greater training and experience exchange with another CANDU 6 Station, like this Conference which let us to grow as persons and technicians. It also allows our utility to have access to other realities and work methods. (authors)

Confinement facilities for handling plutonium

International Nuclear Information System (INIS)

Maraman, W.J.; McNeese, W.D.; Stafford, R.G.

1975-01-01

Plutonium handling on a multigram scale began in 1944. Early criteria, equipment, and techniques for confining contamination have been superseded by more stringent criteria and vastly improved equipment and techniques for in-process contamination control, effluent air cleaning and treatment of liquid wastes. This paper describes the evolution of equipment and practices to minimize exposure of workers and escape of contamination into work areas and into the environment. Early and current contamination controls are compared. (author)

Medication-handling challenges among visually impaired population

Directory of Open Access Journals (Sweden)

Ling Zhi-Han

2017-01-01

Full Text Available Objective: Visually impaired individuals are particularly at higher risk for experiencing a medication error. The aim of this study is to identify the problems encountered by the visually impaired population when handling their medication. Methods: A cross-sectional survey was conducted using an interviewer-guided questionnaire with 100 visually impaired individuals. The questionnaire comprised a series of questions in medication management. Results: All of the respondents perceived that self-administration of medication was a challenging task. A total of 89% of respondents were unable to read the prescription labels, 75% of respondents did not know the expiry date of their own medication, and 58% of respondents did not know the name of the medication. With regard to storage of medication, 72% of respondents did not practice appropriate methods to store their medication, and 80% of respondents kept the unused medication. All of the respondents disposed leftover medication through household rubbish. A total of 64% of respondents never practice medication review. Most (96% of them did not tell health-care providers when they faced difficulties in handling their medication. Conclusion: Most of the visually impaired individuals did not receive appropriate assistance regarding medicine use and having low awareness in medication management. This can lead to increased risk of medication errors or mismanagement among visually impaired population. Hence, effective strategies, especially in pharmaceutical care services, should be structured to assist this special population in medication handling.

Handle with care

Energy Technology Data Exchange (ETDEWEB)

NONE

1965-03-15

Full text: A film dealing with transport of radioactive materials by everyday means - rail, road, sea and air transport - has been made for IAEA. It illustrates in broad terms some of the simple precautions which should be followed by persons dealing with such materials during shipment. Throughout, the picture stresses the transport regulations drawn up and recommended by the Agency, and in particular the need to carry out carefully the instructions based on these regulations in order to ensure that there is no hazard to the public nor to those who handle radioactive materials in transit and storage. In straightforward language, the film addresses the porter of a goods wagon, an airline cargo clerk, a dockside crane operator, a truck driver and others who load and ship freight. It shows the various types of package used to contain different categories of radioactive substances according to the intensity of the radiation emitted. It also illustrates their robustness by a series of tests involving drops, fires, impact, crushing, etc. Clear instructions are conveyed on what to do in the event of an unlikely accident with any type of package. The film is entitled, 'The Safe Transport of Radioactive Materials', and is No. 3 in the series entitled, 'Handle with Care'. It was made for IAEA through the United Kingdom Atomic Energy Authority by the Film Producers' Guild in the United Kingdom. It is in 16 mm colour, optical sound, with a running time of 20 minutes. It is available for order at $50 either direct from IAEA or through any of its Member Governments. Prints can be supplied in English, French, Russian or Spanish. Copies are also available for adaptation for commentaries in other languages. (author)

Safe handling of kilogram amounts of fuel-grade plutonium and of gram amounts of plutonium-238, americium-241 and curium-244

International Nuclear Information System (INIS)

Louwrier, K.P.; Richter, K.

1976-01-01

During the past 10 years about 600 glove-boxes have been installed at the Institute for Transuranium Elements at Karlsruhe. About 80% of these glove-boxes have been designed and equipped for handling 100-g to 1-kg amounts of 239 Pu containing 8-12% 240 Pu (low-exposure plutonium). A small proportion of the glove-boxes is equipped with additional shielding in the form of lead sheet or lead glass for work with recycled plutonium. In these glove-boxes gram-amounts of 241 Am have also been handled for preparation of Al-Am targets using tongs and additional shielding inside the glove-boxes themselves. Water- and lead-shielded glove-boxes equipped with telemanipulators have been installed for routine work with gram-amounts of 241 Am, 243 Am and 244 Cm. A prediction of the expected radiation dose for the personnel is difficult and only valid for a preparation procedure with well-defined preparation steps, owing to the fact that gamma dose-rates depend strongly upon proximity and source seize. Gamma radiation dose measurements during non-routine work for 241 Am target preparation showed that handling of gram amounts leads to a rather high irradiation dose for the personnel, despite lead or steel glove-box shielding and shielding within the glove-boxes. A direct glove-hand to americium contact must be avoided. For all glove-handling of materials with gamma radiation an irradiation control of the forearms of the personnel by, for example, thermoluminescence dosimeters is necessary. Routine handling of americium and curium should be executed with master-slave equipment behind neutron and gamma shielding. (author)

Method for making a low density polyethylene waste form for safe disposal of low level radioactive material

Science.gov (United States)

Colombo, P.; Kalb, P.D.

1984-06-05

In the method of the invention low density polyethylene pellets are mixed in a predetermined ratio with radioactive particulate material, then the mixture is fed through a screw-type extruder that melts the low density polyethylene under a predetermined pressure and temperature to form a homogeneous matrix that is extruded and separated into solid monolithic waste forms. The solid waste forms are adapted to be safely handled, stored for a short time, and safely disposed of in approved depositories.

Haptic shared control improves hot cell remote handling despite controller inaccuracies

International Nuclear Information System (INIS)

Oosterhout, J. van; Abbink, D.A.; Koning, J.F.; Boessenkool, H.; Wildenbeest, J.G.W.; Heemskerk, C.J.M.

2013-01-01

Highlights: Haptic shared control is generally based upon perfect environment information. A realistic implementation holds model errors with respect to the environment. Operators were aided with inaccurate guiding forces during a peg-in-hole task. The results showed that small guiding inaccuracies still aid the operator. -- Abstract: A promising solution to improve task performance in ITER hot cell remote handling is the use of haptic shared control. Haptic shared control can assist the human operator along a safe and optimal path with continuous guiding forces from an intelligent autonomous controller. Previous research tested such controllers with accurate knowledge of the environment (giving flawless guiding forces), while in a practical implementation guidance forces will sometimes be flawed due to inaccurate models or sensor information. This research investigated the effect of zero and small (7.5 mm) errors on task performance compared to normal (unguided) operation. In a human factors experiment subjects performed a three dimensional virtual reality peg-in-hole type task (30 mm diameter; 0.1 mm clearance), with and without potentially flawed haptic shared control. The results showed that the presence of guiding forces, despite of small guiding errors, still improved task performance with respect to unguided operations

Haptic shared control improves hot cell remote handling despite controller inaccuracies

Energy Technology Data Exchange (ETDEWEB)

Oosterhout, J. van, E-mail: J.vanOosterhout@differ.nl [Delft University of Technology, Faculty of 3mE, BioMechanical Engineering Department, Mekelweg 2, 2628 CD Delft (Netherlands); Abbink, D.A. [Delft University of Technology, Faculty of 3mE, BioMechanical Engineering Department, Mekelweg 2, 2628 CD Delft (Netherlands); Koning, J.F. [Heemskerk Innovative Technology B.V., Jonckerweg 12, 2201 DZ Noordwijk (Netherlands); Boessenkool, H. [FOM Institute DIFFER (Dutch Institute for Fundamental Energy Research), Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Wildenbeest, J.G.W. [Delft University of Technology, Faculty of 3mE, BioMechanical Engineering Department, Mekelweg 2, 2628 CD Delft (Netherlands); Heemskerk Innovative Technology B.V., Jonckerweg 12, 2201 DZ Noordwijk (Netherlands); Heemskerk, C.J.M. [Heemskerk Innovative Technology B.V., Jonckerweg 12, 2201 DZ Noordwijk (Netherlands)

2013-10-15

Highlights: Haptic shared control is generally based upon perfect environment information. A realistic implementation holds model errors with respect to the environment. Operators were aided with inaccurate guiding forces during a peg-in-hole task. The results showed that small guiding inaccuracies still aid the operator. -- Abstract: A promising solution to improve task performance in ITER hot cell remote handling is the use of haptic shared control. Haptic shared control can assist the human operator along a safe and optimal path with continuous guiding forces from an intelligent autonomous controller. Previous research tested such controllers with accurate knowledge of the environment (giving flawless guiding forces), while in a practical implementation guidance forces will sometimes be flawed due to inaccurate models or sensor information. This research investigated the effect of zero and small (7.5 mm) errors on task performance compared to normal (unguided) operation. In a human factors experiment subjects performed a three dimensional virtual reality peg-in-hole type task (30 mm diameter; 0.1 mm clearance), with and without potentially flawed haptic shared control. The results showed that the presence of guiding forces, despite of small guiding errors, still improved task performance with respect to unguided operations.

Handling, conditioning and disposal of spent sealed sources

International Nuclear Information System (INIS)

1990-02-01

The series entitled ''Technical Manual for the Management of Low and Intermediate Level Wastes Generated at Small Nuclear Research Centres and by Radioisotope Users in Medicine, Research and Industry'' will serve as reference material to experts on technical assistance missions and provide ''direct know-how'' for technical staff in developing countries. This document is the first in the series. It provides the technical guidance and know-how necessary to permit developing Member States to safely handle, condition and store spent sealed radiation sources. It covers: characterization of sealed sources, legislation and regulations, management of spent sealed sources, transportation and disposal of spent sealed sources. 5 refs, 10 figs, 6 tabs

Safe management of waste from health-care activities

International Nuclear Information System (INIS)

Pruess, A.; Giroult, E.; Rushbrook, P.

1999-01-01

The waste produced in the course of health-care activities, from contaminated needles to radioactive isotopes, carries a greater potential for causing infection and injury than any other type of waste, and inadequate or inappropriate management is likely to have serious public health consequences and deleterious effects on the environment. This handbook - the result of extensive international consultation and collaboration - provides comprehensive guidance on safe, efficient, and environmentally sound methods for the handling and disposal of health-care wastes. The various categories of waste are clearly defined and the particular hazards that each poses are described. Considerable prominence is given to the careful planning that is essential for the success of waste management; workable means of minimizing waste production are outlined and the role of reuse and recycling of waste is discussed. Most of the text, however, is devoted to the collection, segregation, storage, transport, and disposal of wastes. Details of containers for each category of waste, labelling of waste packages, and storage conditions are provided, and the various technologies for treatment of waste and disposal of final residues are discussed at length. Advice is given on occupational safety for all personnel involved with waste handling, and a separate chapter is devoted to the closely related topic of hospital hygiene and infection control. The handbook pays particular attention to basic processes and technologies that are not only safe but also affordable, sustainable, and culturally appropriate. For health-care settings in which resources are severely limited there is a separate chapter on minimal programmes; this summarizes all the simplest and least costly techniques that can be employed for the safe management of health-care wastes. The guide is aimed at public health managers and policy-makers, hospital managers, environmental health professionals, and all administrators with an

Implicit attitudes towards risky and safe driving

DEFF Research Database (Denmark)

Martinussen, Laila Marianne; Sømhovd, Mikael Julius; Møller, Mette

; further, self-reports of the intention to drive safely (or not) are socially sensitive. Therefore, we examined automatic preferences towards safe and risky driving with a Go/No-go Association Task (GNAT). The results suggest that (1) implicit attitudes towards driving behavior can be measured reliably...... with the GNAT; (2) implicit attitudes towards safe driving versus towards risky driving may be separable constructs. We propose that research on driving behavior may benefit from routinely including measures of implicit cognition. A practical advantage is a lesser susceptibility to social desirability biases......, compared to self-report methods. Pending replication in future research, the apparent dissociation between implicit attitudes towards safe versus risky driving that we observed may contribute to a greater theoretical understanding of the causes of unsafe and risky driving behavior....

Controlling fugitive dust emissions in material handling operations

Energy Technology Data Exchange (ETDEWEB)

Tooker, G E

1992-05-01

The primary mechanism of fugitive dust generation in bulk material handling transfer operations is by dispersion of dust in turbulent air induced to flow with falling or projected material streams. This paper returns to basic theories of particle dynamics and fluid mechanics to quantify the dust generating mechanism by rational analysis. Calculations involving fluid mechanisms are made easier by the availability of the personal computer and the many math manipulating programs. Rational analysis is much more cost effective when estimating collection air volumes to control fugitive emissions; especially in enclosed material handling transfers transporting large volumes of dusty material. Example calculations, using a typical enclosed conveyor-to-conveyor transfer operation are presented to illustrate and highlight the key parameters that determine the magnitude of induced air flow that must be controlled. The methods presented in this paper for estimating collection air volumes apply only enclosed material handling transfers, exhausted to a dust collector. Since some assistance to the control of dust emissions must be given by the material handling transfer chute design, a discussion of good transfer chute design practice is presented. 4 refs., 2 figs., 2 tabs.

Advanced operator interface design for CANDU-3 fuel handling system

Energy Technology Data Exchange (ETDEWEB)

Arapakota, D [Atomic Energy of Canada Ltd., Saskatoon, SK (Canada)

1996-12-31

The Operator Interface for the CANDU 3 Fuel Handling (F/H) System incorporates several improvements over the existing designs. A functionally independent sit-down CRT (cathode-ray tube) based Control Console is provided for the Fuel Handling Operator in the Main Control Room. The Display System makes use of current technology and provides a user friendly operator interface. Regular and emergency control operations can be carried out from this control console. A stand-up control panel is provided as a back-up with limited functionality adequate to put the F/H System in a safe state in case of an unlikely non-availability of the Plant Display System or the F/H Control System`. The system design philosophy, hardware configuration and the advanced display system features are described in this paper The F/H Operator Interface System developed for CANDU 3 can be adapted to CANDU 9 as well as to the existing stations. (author).

Advanced operator interface design for CANDU-3 fuel handling system

International Nuclear Information System (INIS)

Arapakota, D.

1995-01-01

The Operator Interface for the CANDU 3 Fuel Handling (F/H) System incorporates several improvements over the existing designs. A functionally independent sit-down CRT (cathode-ray tube) based Control Console is provided for the Fuel Handling Operator in the Main Control Room. The Display System makes use of current technology and provides a user friendly operator interface. Regular and emergency control operations can be carried out from this control console. A stand-up control panel is provided as a back-up with limited functionality adequate to put the F/H System in a safe state in case of an unlikely non-availability of the Plant Display System or the F/H Control System'. The system design philosophy, hardware configuration and the advanced display system features are described in this paper The F/H Operator Interface System developed for CANDU 3 can be adapted to CANDU 9 as well as to the existing stations. (author)

The experimental assessment of dynamic tire handling performance

NARCIS (Netherlands)

Pauwelussen, J.P.

1999-01-01

Testing of steady state tire handling performance is nowadays common practice with slip angle sweeps and breaking being simulated in the laboratory with drum or flat belt, or on the road with a test trailer. In recent years, more emphasis is put on dynamic tire models, motivated by ride comfort

Canadian capabilities in fusion fuels technology and remote handling

International Nuclear Information System (INIS)

1987-10-01

This report describes Canadian expertise in fusion fuels technology and remote handling. The Canadian Fusion Fuels Technology Project (CFFTP) was established and is funded by the Canadian government, the province of Ontario and Ontario Hydro to focus on the technology necessary to produce and manage the tritium and deuterium fuels to be used in fusion power reactors. Its activities are divided amongst three responsibility areas, namely, the development of blanket, first wall, reactor exhaust and fuel processing systems, the development of safe and reliable operating procedures for fusion facilities, and, finally, the application of these developments to specific projects such as tritium laboratories. CFFTP also hopes to utilize and adapt Canadian developments in an international sense, by, for instance, offering training courses to the international tritium community. Tritium management expertise is widely available in Canada because tritium is a byproduct of the routine operation of CANDU reactors. Expertise in remote handling is another byproduct of research and development of of CANDU facilities. In addition to describing the remote handling technology developed in Canada, this report contains a brief description of the Canadian tritium laboratories, storage beds and extraction plants as well as a discussion of tritium monitors and equipment developed in support of the CANDU reactor and fusion programs. Appendix A lists Canadian manufacturers of tritium equipment and Appendix B describes some of the projects performed by CFFTP for offshore clients

Regulatory control for safe usage of radiation sources in India

International Nuclear Information System (INIS)

Ghosh, P.K.; Sonawane, A.U.

1998-01-01

The widespread applications of radioactive materials and radiation generating equipment in the field of industry, medicine agriculture and research in India necessitated the establishment of an efficient regulatory framework and consequently the Atomic Energy Regulatory Board (AERB) was constituted to exercise regulatory control over the safe usage of the radioactive materials and the radiation generating equipment. The Atomic Energy Act, 1962 and the Radiation Protection Rules, 1971 promulgated under the Act forms the basis of radiation safety in India and Chairman, AERB is the Competent Authority to enforce the regulatory provisions of the Radiation Protection Rules, 1971, for safe use of radiation source in the country. AERB has published a number of documents such as Radiation Surveillance Procedures, Standards, Codes, Guides and Manuals for safe use and handling of radioactive materials and radiation generating equipment. Apart from nuclear fuel cycle documents, these publications pertain to industrial radiography, medical application of radiation, transport of radioactive material, industrial gamma irradiators, X-ray units etc. AERB safety related publications are based on international standards e.g. BSS, IAEA, ICRP, ISO etc. This paper outlines the methodology of regulatory control exercised by AERB for safe use of the radioactive materials and the radiation generating equipment in the country. (author)

Knowledge, Attitudes and Practices of Law Enforcement Officers on Rabies and Animal Control Issues in Kansas.

Science.gov (United States)

Straily, A; Trevino-Garrison, I

2017-03-01

Rabies is a deadly zoonoses endemic in the United States, including Kansas. Animal control programmes that emphasize vaccination of dogs and cats, removal of stray animals and enforcement of licensure programmes have historically been essential in reducing the risk of rabies exposures to humans (Beran, 1991). Kansas does not mandate the use of animal control officers [ACOs] and in areas where there is no designated animal control officer, law enforcement officers [LEOs] are required to fill that role. Little is known about LEOs' knowledge of rabies, their current practices in responding to animal-related calls or if they receive any specialized training to perform the duties of an ACO. A web-based, voluntary and anonymous survey was sent to law enforcement officers in Kansas in January 2014. The survey included questions about animal control practices and a self-assessment of rabies knowledge. The response rate was 16.2%. All respondents indicated LEOs will respond to animal-related calls, even if there was an ACO available in their department or jurisdiction. A majority of respondents indicated they had not received training on safe animal handling (62.9%, 61/97) or zoonoses prevention (85.6%, 83/97), even though a strong majority considered such training important (89.7% and 79.4%, respectively). Most respondents (>80%) were able to correctly identify animals capable of transmitting rabies but were less aware of how rabies was transmitted or the severity of rabies in humans. Our results demonstrate that Kansas LEOs perform animal control duties, many without the proper training, even though most consider such training to be important to be able to perform their duties safely. Training on safe animal handling and zoonoses prevention should be provided to all LEOs in Kansas to enable them to safely execute their duties and provide timely and accurate information to citizens regarding rabies prevention. © 2016 Blackwell Verlag GmbH.

How safe is GP obstetrics? An assessment of antenatal risk factors and perinatal outcomes in one rural practice.

Science.gov (United States)

Kirke, Andrew B

2010-01-01

Approximately one-fifth of Western Australian women deliver their babies in rural and remote regions of the state. The medical workforce caring for these women is predominantly non-specialist GP obstetricians. This article explores how safe is rural GP obstetrics. It reviews one rural obstetric practice in detail. In particular it asks these questions: What are the antenatal risk factors? What are the obstetric outcomes for the mother? What are the obstetric outcomes for the baby? This study is an audit of the author's obstetric practice over a two-year period from July 2007 to June 2009. The audit criteria included all obstetric patients managed by the author through to delivery and immediate post-partum care. Hospital and practice notes for 195 singleton pregnancies were reviewed. Antenatal risk factors, intrapartum events and immediate post-partum events for all patients cared for by the author through to delivery were recorded and compared with averages for Western Australia from published 2007 figures. The maternal population had mean age of 28.5 years, 2.1% were Aboriginal. Body mass index (BMI) at booking was a mean of 27.1 (range 18-40). Those with a BMI > 40 were referred elsewhere. Significant antenatal risks included smoking (14.9%), previous caesarean section (14.4%), hypertension (13.3%), pre-eclampsia (5.1%) and gestational diabetes (8.2%). Intrapartum there were high rates of induction (33.5%), epidural/spinal (34.7%) and shoulder dystocia (3.6%). Type of delivery was predominantly spontaneous vaginal (65.6%), vacuum (14.9%), forceps (2.6%), elective caesarean (9.7%) and non-elective caesarean (8.7%). Post-partum events included post-partum haemorrhage (10.3%), transfusion (1.5%), retained placenta (2.1%), neonatal jaundice (21.1%), neonatal seizures (1.5%) neonatal sepsis (1.5%) and neonatal special care or intensive care (SCU/NICU) admission (9.8%). The audit population was a group of relatively low risk pregnant women. Despite referral of more

78 FR 27303 - Irradiation in the Production, Processing, and Handling of Animal Feed and Pet Food; Electron...

Science.gov (United States)

2013-05-10

...-0178] Irradiation in the Production, Processing, and Handling of Animal Feed and Pet Food; Electron... electron beam and x-ray sources for irradiation of poultry feed and poultry feed ingredients. This action... CFR part 579) to provide for the safe use of electron beam and x-ray sources for irradiation of...

Handling of multiassembly sealed baskets between reactor storage and a remote handling facility

International Nuclear Information System (INIS)

Massey, J.V.; Kessler, J.H.; McSherry, A.J.

1989-06-01

The storage of multiple fuel assemblies in sealed (welded) dry storage baskets is gaining increasing use to augment at-reactor fuel storage capacity. Since this increasing use will place a significant number of such baskets on reactor sites, some initial downstream planning for their future handling scenarios for retrieving multi-assembly sealed baskets (MSBs) from onsite storage and transferring and shipping the fuel (and/or the baskets) to a federally operated remote handling facility (RHF). Numerous options or at-reactor and away-from-reactor handling were investigated. Materials handling flowsheets were developed along with conceptual designs for the equipment and tools required to handle and open the MSBs. The handling options were evaluated and compared to a reference case, fuel handling sequence (i.e., fuel assemblies are taken from the fuel pool, shipped to a receiving and handling facility and placed into interim storage). The main parameters analyzed are throughout, radiation dose burden and cost. In addition to evaluating the handling of MSBs, this work also evaluated handling consolidated fuel canisters (CFCs). In summary, the handling of MSBs and CFCs in the store, ship and bury fuel cycle was found to be feasible and, under some conditions, to offer significant benefits in terms of throughput, cost and safety. 14 refs., 20 figs., 24 tabs

Safety improvement of start-up neutron source handling work by preparing new transport containers

International Nuclear Information System (INIS)

Shimazaki, Yosuke; Sawahata, Hiroaki; Yanagida, Yoshinori; Shinohara, Masanori; Kawamoto, Taiki; Takada, Shoji

2016-01-01

The conventional transport containers that have been used in HTTR start-up neutron source replacement work are not specialized type for HTTR start-up neutron source. As the risks associated with the safe handling of neutron source holders due to the above fact, the following three risks have been confirmed: (1) exposure risk due to leakage of neutron source or gamma rays, (2) risk of erroneous fall of neutron source holders, and (3) accident due to incorrect handling of transport containers. This paper reports the risks confirmed in the handling of neutron source holders associated with transport containers and the risk reduction measures, as well as the fabrication of new transport containers. By employing the size-reduction and simple structure, new transport containers have been completed at the same level of costs compared with the continuous use of the conventional transport containers, while satisfying the criteria of Type A transport materials and serving as risk preventive measures. Thus, new transport containers aimed at the risk prevention measures for the handling work of neutron source holders have been completed, and the safety of operation has been improved. (A.O.)

Handling encapsulated spent fuel in a geologic repository environment

International Nuclear Information System (INIS)

Ballou, L.B.

1983-02-01

In support of the Spent Fuel Test-Climate at the U.S. Department of Energy's Nevada Test Site, a spent-fuel canister handling system has been designed, deployed, and operated successfully during the past five years. This system transports encapsulated commercial spent-fuel assemblies between the packaging facility and the test site (approx. 100 km), transfers the canisters 420 m vertically to and from a geologic storage drift, and emplaces or retrieves the canisters from the storage holes in the floor of the drift. The spent-fuel canisters are maintained in a fully shielded configuration at all times during the handling cycle, permitting manned access at any time for response to any abnormal conditions. All normal operations are conducted by remote control, thus assuring as low as reasonably achievable exposures to operators; specifically, we have had no measurable exposure during 30 canister transfer operations. While not intended to be prototypical of repository handling operations, the system embodies a number of concepts, now demonstrated to be safe, reliable, and economical, which may be very useful in evaluating full-scale repository handling alternatives in the future. Among the potentially significant concepts are: Use of an integral shielding plug to minimize radiation streaming at all transfer interfaces. Hydraulically actuated transfer cask jacking and rotation features to reduce excavation headroom requirements. Use of a dedicated small diameter (0.5 m) drilled shaft for transfer between the surface and repository workings. A wire-line hoisting system with positive emergency braking device which travels with the load. Remotely activated grapples - three used in the system - which are insensitive to load orientation. Rail-mounted underground transfer vehicle operated with no personnel underground

Nuclear fuel handling apparatus

International Nuclear Information System (INIS)

Andrea, C.; Dupen, C.F.G.; Noyes, R.C.

1977-01-01

A fuel handling machine for a liquid metal cooled nuclear reactor in which a retractable handling tube and gripper are lowered into the reactor to withdraw a spent fuel assembly into the handling tube. The handling tube containing the fuel assembly immersed in liquid sodium is then withdrawn completely from the reactor into the outer barrel of the handling machine. The machine is then used to transport the spent fuel assembly directly to a remotely located decay tank. The fuel handling machine includes a decay heat removal system which continuously removes heat from the interior of the handling tube and which is capable of operating at its full cooling capacity at all times. The handling tube is supported in the machine from an articulated joint which enables it to readily align itself with the correct position in the core. An emergency sodium supply is carried directly by the machine to provide make up in the event of a loss of sodium from the handling tube during transport to the decay tank. 5 claims, 32 drawing figures

Evaluation of the CDC safe water-storage intervention to improve ...

African Journals Online (AJOL)

Evaluation of the CDC safe water-storage intervention to improve the microbiological quality of point-of-use drinking water in rural communities in South Africa. ... use of safe household water-storage devices and water treatment processes and improvement of hygiene and sanitation practices in these rural households.

Think Before You Ink: Are Tattoos Safe?

Science.gov (United States)

... Consumers Consumer Updates Think Before You Ink: Are Tattoos Safe? Share Tweet Linkedin Pin it More sharing ... I be concerned about unsafe practices, or the tattoo ink itself? Both. While you can get serious ...

How to Handle Difficult Parents: Proven Solutions for Teachers. Second Edition

Science.gov (United States)

Tingley, Suzanne Capek

2012-01-01

"How to Handle Difficult Parents" is a funny, but practical, guide to working effectively with parents and avoiding unnecessary conflict. Whether you're a teacher (regular or special education) or a coach, this book will give you practical suggestions regarding what to say and how to say it to parents who question your lesson plans, challenge your…

Brownfields and Urban Agriculture: Interim Guidelines for Safe Gardening Practices

Science.gov (United States)

This document is a condensation of the input of experts from the government, the nonprofit sector, and academia who gathered to outline the range of issues which need to be addressed in order to safely grow food on former brownfield sites.

Patient Involvement in Safe Delivery: A Qualitative Study

OpenAIRE

Olfati, Forozun; Asefzadeh, Saeid; Changizi, Nasrin; Keramat, Afsaneh; Yunesian, Masud

2015-01-01

Introduction: Patient involvement in safe delivery planning is considered important yet not widely practiced. The present study aimed at identifythe factors that affect patient involvementin safe delivery, as recommended by parturient women. Methods: This study was part of a qualitative research conducted by content analysis method and purposive sampling in 2013. The data were collected through 63 semi-structured interviews in4 hospitalsand analyzed using thematic content analysis. The partic...

Pengaruh Fundamental Safe Work Practice Terhadap Pencegahan Kecelakaan Kerja Bagian Workover di PT. ACS Duri

Directory of Open Access Journals (Sweden)

M. Saifullah

2012-05-01

Full Text Available PT. Asrindo Citraseni Satria (ACS is a company engaged in oil and gas and is a sub contractor PT.CPI. PT. ACS has implemented FSWP whose objective which is to identify, assess, reduce, control or eliminate the risks associated with the work, but until now there is still a work accident that occurred even in small quantities. The author would like to know about the effect of application of the section Fundamental Safe Work Practice (FSWP can prevent the accident in workover PT. ACS Duri. This research uses quantitative analytical survey, with the design of Cross Sectional conducted from May to June 2012 with a large sample of 122 of the 360 people who work in the workover. Samples were taken by using a system Accidental Sampling, and the data processed using a computer program to analyze the independent variables in the form of application as well as the dependent variable is FSWP occupational accidents and tested using Chi-square. The results showed that, the application of FSWP can prevent accidents which includes Standard Operating Procedure (SOP with the value of P = 0.01 is smaller than the value of α = 0.05 that means there are a significant correlation between the application of SOP with workplace accidents, PTW with a value of P = 0.02 is more smaller than the value of α = 0.05 means that there are significant correlation between the application of Permit To Work (PTW accidents, and tagged with a value of P = 0.01 is smaller than the value of α= 0.05 means there is a significant correlation between the application of Log Out/Tag Out (LOTO by accident. It was concluded that, the application of FSWP can reduce / reduce the number of occupational accidents in the workover, and is expected for the management of HES to improving the knowledge for employee about the aspects of FSWP (SWA, Hazard Analysis, SOP, Access Control, PPE, MSDS, Housekeeping, PTW & Other Safe Work Practices.

Staying Safe While Doing Science in Public: Emerging Best Practices for Social Media

Science.gov (United States)

Jefferson, A.; McKinnon, M.

2016-12-01

Doing science in public has incalculable benefits for professional networking, science advocacy, and public outreach, but it also carries significant risks. Online harassment related to social media use can pose significant emotional hardship, negatively impact professional standing, and even threaten physical welfare. Women, people of color, and other underrepresented people in science are disproportionately targeted for anonymous online harassment. We analyzed our experiences with online harassment, and tactics for managing this harassment. While anecdotal, our experiences cover scientists with differing identities and fields, demonstrating that while the details change the overarching patterns remain the same. Fear of becoming a target poses a significant barrier to engaging in public discourse about science. But it is possible to mitigate this risk. Successful strategies for social media to promote science while staying safe are slowly creating a body of emerging best practices. These tactics include proactively restricting access to personal information, developing strategies for identifying and responding to deliberate antagonists (trolls), and choosing when and how to participate in volatile topics. They also require full-community engagement from creating support networks, partnering with allies to manage sudden floods of hostility, and educating on security practices for protecting colleagues' potentially sensitive personal information. It is our hope that frank and open discussion of the realistic threat passed by harassment and strategies for mitigating that threat will jump start a culture of online safety amongst geoscientists, and encourage our most vulnerable and underrepresented scientists to participate in the public sphere.

Health Education in Practice: Employee Conflict Resolution Knowledge and Conflict Handling Strategies

Science.gov (United States)

Hackett, Alexis; Renschler, Lauren; Kramer, Alaina

2014-01-01

The purpose of this project was to determine if a brief workplace conflict resolution workshop improved employee conflict resolution knowledge and to examine which conflict handling strategies (Yielding, Compromising, Forcing, Problem-Solving, Avoiding) were most used by employees when dealing with workplace conflict. A pre-test/post-test control…

Safe China final report. Promoting the EU and German standards and practices of environmental protection and industrial safety in China

Energy Technology Data Exchange (ETDEWEB)

Jovanovic, A.; Guntrum, R.; Liu, Y. (eds.)

2013-07-01

This document presents the results of the international technology transfer and cooperation project SafeChina (''Promoting the EU and German standards and practices of Environmental Protection and Industrial Safety in China'', www.safechina.risk-technologies.com). The purpose of the project was to build an education, training and certification infrastructure and to offer to Chinese engineers and other professionals the possibility to learn about the EU HSE practices and regulation and qualify as Environmental- and Safety engineers according to the EU criteria, guidelines and practice. The main partners in the project have been Steinbeis University Berlin/Steinbeis Transfer Institute Advanced Risk Technologies, and the OEG mbH (Deutsche lnvestitions- und Entwicklungsgesellschaft mbH), subsidiary of KfW Banking Group, Germany. Main Chinese partners were Beijing Municipal Institute of Labour Protection and Capital University of Economics and Business, Beijing.

Safe China final report. Promoting the EU and German standards and practices of environmental protection and industrial safety in China

International Nuclear Information System (INIS)

Jovanovic, A.; Guntrum, R.; Liu, Y.

2013-01-01

This document presents the results of the international technology transfer and cooperation project SafeChina (''Promoting the EU and German standards and practices of Environmental Protection and Industrial Safety in China'', www.safechina.risk-technologies.com). The purpose of the project was to build an education, training and certification infrastructure and to offer to Chinese engineers and other professionals the possibility to learn about the EU HSE practices and regulation and qualify as Environmental- and Safety engineers according to the EU criteria, guidelines and practice. The main partners in the project have been Steinbeis University Berlin/Steinbeis Transfer Institute Advanced Risk Technologies, and the OEG mbH (Deutsche lnvestitions- und Entwicklungsgesellschaft mbH), subsidiary of KfW Banking Group, Germany. Main Chinese partners were Beijing Municipal Institute of Labour Protection and Capital University of Economics and Business, Beijing.

Enteral Feeding Set Handling Techniques.

Science.gov (United States)

Lyman, Beth; Williams, Maria; Sollazzo, Janet; Hayden, Ashley; Hensley, Pam; Dai, Hongying; Roberts, Cristine

2017-04-01

Enteral nutrition therapy is common practice in pediatric clinical settings. Often patients will receive a pump-assisted bolus feeding over 30 minutes several times per day using the same enteral feeding set (EFS). This study aims to determine the safest and most efficacious way to handle the EFS between feedings. Three EFS handling techniques were compared through simulation for bacterial growth, nursing time, and supply costs: (1) rinsing the EFS with sterile water after each feeding, (2) refrigerating the EFS between feedings, and (3) using a ready-to-hang (RTH) product maintained at room temperature. Cultures were obtained at baseline, hour 12, and hour 21 of the 24-hour cycle. A time-in-motion analysis was conducted and reported in average number of seconds to complete each procedure. Supply costs were inventoried for 1 month comparing the actual usage to our estimated usage. Of 1080 cultures obtained, the overall bacterial growth rate was 8.7%. The rinse and refrigeration techniques displayed similar bacterial growth (11.4% vs 10.3%, P = .63). The RTH technique displayed the least bacterial growth of any method (4.4%, P = .002). The time analysis in minutes showed the rinse method was the most time-consuming (44.8 ± 2.7) vs refrigeration (35.8 ± 2.6) and RTH (31.08 ± 0.6) ( P refrigerating the EFS between uses is the next most efficacious method for handling the EFS between bolus feeds.

Disinfection of Dental Impressions Prior to Handling at Muhimbili ...

African Journals Online (AJOL)

All four dental technicians who handled the received impressions were interviewed. Questions asked were on practice and attitudes and responses were on different point scales. Results are based on information gathered from the dental technicians. Results: Of the 1,453 impressions received none were reported to have ...

Recommendations for Collection and Handling of Specimens From Group Breast Cancer Clinical Trials

Science.gov (United States)

Leyland-Jones, Brian R.; Ambrosone, Christine B.; Bartlett, John; Ellis, Matthew J.C.; Enos, Rebecca A.; Raji, Adekunle; Pins, Michael R.; Zujewski, Jo Anne; Hewitt, Stephen M.; Forbes, John F.; Abramovitz, Mark; Braga, Sofia; Cardoso, Fatima; Harbeck, Nadia; Denkert, Carsten; Jewell, Scott D.

2008-01-01

Recommendations for specimen collection and handling have been developed for adoption across breast cancer clinical trials conducted by the Breast International Group (BIG)-sponsored Groups and the National Cancer Institute (NCI)-sponsored North American Cooperative Groups. These recommendations are meant to promote identifiable standards for specimen collection and handling within and across breast cancer trials, such that the variability in collection/handling practices that currently exists is minimized and specimen condition and quality are enhanced, thereby maximizing results from specimen-based diagnostic testing and research. Three working groups were formed from the Cooperative Group Banking Committee, BIG groups, and North American breast cancer cooperative groups to identify standards for collection and handling of (1) formalin-fixed, paraffin-embedded (FFPE) tissue; (2) blood and its components; and (3) fresh/frozen tissue from breast cancer trials. The working groups collected standard operating procedures from multiple group specimen banks, administered a survey on banking practices to those banks, and engaged in a series of discussions from 2005 to 2007. Their contributions were synthesized into this document, which focuses primarily on collection and handling of specimens to the point of shipment to the central bank, although also offers some guidance to central banks. Major recommendations include submission of an FFPE block, whole blood, and serial serum or plasma from breast cancer clinical trials, and use of one fixative and buffer type (10% neutral phosphate-buffered formalin, pH 7) for FFPE tissue across trials. Recommendations for proper handling and shipping were developed for blood, serum, plasma, FFPE, and fresh/frozen tissue. PMID:18955459

REMOTE MATERIAL HANDLING IN THE YUCCA MOUNTAIN WASTE PACKAGE CLOSURE CELL AND SUPPORT AREA GLOVEBOX

International Nuclear Information System (INIS)

K.M. Croft; S.M. Allen; M.W. Borland

2005-01-01

The Yucca Mountain Waste Package Closure System (WPCS) cells provide for shielding of highly radioactive materials contained in unsealed waste packages. The purpose of the cells is to provide safe environments for package handling and sealing operations. Once sealed, the packages are placed in the Yucca Mountain Repository. Closure of a typical waste package involves a number of remote operations. Those involved typically include the placement of matched lids onto the waste package. The lids are then individually sealed to the waste package by welding. Currently, the waste package includes three lids. One lid is placed before movement of the waste package to the closure cell; the final two are placed inside the closure cell, where they are welded to the waste package. These and other important operations require considerable remote material handling within the cell environment. This paper discusses the remote material handling equipment, designs, functions, operations, and maintenance, relative to waste package closure

Determinants of knowledge of critical danger signs, safe childbirth and immediate newborn care practices among auxiliary midwives: a cross sectional survey in Myanmar.

Science.gov (United States)

Than, Kyu Kyu; Morgan, Alison; Pham, Minh Duc; Beeson, James G; Luchters, Stanley

2017-07-05

The re-emergence of community-based health workers such as the auxiliary midwives (AMWs) in Myanmar, who are local female volunteers, has been an important strategy to address global health workforce shortages. The Myanmar government recommends one AMW for every village. The aim of this study is to investigate the current knowledge of critical danger signs and practices for safe childbirth and immediate newborn care of AMWs to inform potential task shifting of additional healthcare responsibilities. A cross-sectional survey was conducted from July 2015 to June 2016 in three hard-to-reach areas in Myanmar. Face-to-face interviews were conducted using a pretested questionnaire. Among 262 AMWs participating in the study, only 8% of AMWs were able to identify at least 80% of 20 critical danger signs. Factors associated with greater knowledge of critical danger signs included older age over 35 years (adjusted OR (AOR) 2.19, 95% CI 0.99 to 4.83), having received refresher training within the last year (AOR 2.20, 95% CI 1.21 to 4.01) and receiving adequate supervision (AOR 5.04, 95% CI 2.74 to 9.29). Those who employed all six safe childbirth and immediate newborn care practices were more likely to report greater knowledge of danger signs (AOR 2.81, 95% CI 1.50 to 5.26), adequate work supervision (AOR 3.18 95% CI 1.62 to 6.24) and less education (AOR 0.44, 95% CI 0.23 to 0.88). The low level of knowledge of critical danger signs and reported practices for safe childbirth identified suggest that an evaluation of the current AMW training and supervision programme needs to be revisited to ensure that existing practices, including recognition of danger signs, meet quality care standards before new interventions are introduced or new responsibilities given to AMWs. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Challenges to Safe Injection Practices in Ambulatory Care.

Science.gov (United States)

Anderson, Laura; Weissburg, Benjamin; Rogers, Kelli; Musuuza, Jackson; Safdar, Nasia; Shirley, Daniel

2017-05-01

Most recent infection outbreaks caused by unsafe injection practices in the United States have occurred in ambulatory settings. We utilized direct observation and a survey to assess injection practices at 31 clinics. Improper vial use was observed at 13 clinics (41.9%). Pharmacy support and healthcare worker education may improve injection practices. Infect Control Hosp Epidemiol 2017;38:614-616.

Safe sex

Science.gov (United States)

... sex; Sexually transmitted - safe sex; GC - safe sex; Gonorrhea - safe sex; Herpes - safe sex; HIV - safe sex; ... contact. STIs include: Chlamydia Genital herpes Genital warts Gonorrhea Hepatitis HIV HPV Syphilis STIs are also called ...

Anatomical practices of preserving, handling and management of ...

African Journals Online (AJOL)

Deaths resulting from disasters as well as some unwholesome practices are major factors that affect the quality of practices. Yet, the management of human remains requires utmost attention for the purpose of health, ethics and environment. Outbreaks of diseases and the spread of such, for instance, the case of Ebola virus, ...

Safe operation of research reactors and critical assemblies. Code of practice and annexes. 1984 ed

International Nuclear Information System (INIS)

1984-01-01

The safe operation of research reactors and critical assemblies (hereafter termed 'reactors') requires proper design, construction, management and supervision. This Code of Practice deals mainly with management and supervision. The provisions of the Code apply to the whole life of the reactor, including modification, updating and upgrading. The Code may be subject to revision in the light of experience and the state of technology. The Code is aimed at defining minimum requirements for the safe operation of reactors. Emphasis is placed on which safety requirements should be met rather than on specifying how these requirements may be met. The Code also provides guidance and information to persons and authorities responsible for the operation of reactors. The Code recommends that documents dealing with the operation of reactors and including safety analyses be prepared and submitted for review and approval to a regulatory body. Operation would be authorized on the understanding that it would comply with limits and conditions designed to ensure safety. The Code covers a wide range of reactor types, which gives rise to a variety of safety issues. Safety issues applicable to specific reactor types only (e.g. fast reactors) are not necessarily covered in this Code. Some of the recommendations in the Code are not directly applicable to critical assemblies. A recommendation may therefore be interpreted according to the type of reactor concerned. In such cases the words 'adequate' and 'appropriate' are used to mean 'adequate' or 'appropriate' for the type of reactor under consideration.

Handling of UF6 in U.S. gaseous diffusion plants

International Nuclear Information System (INIS)

Legeay, A.J.

1978-01-01

A comprehensive systems analysis of UF 6 handling has been made in the three U.S. gaseous diffusion plants and has resulted in a significant impact on the equipment design and the operating procedures of these facilities. The equipment, facilities, and industrial practices in UF 6 handling operations as they existed in the early 1970's are reviewed with particular emphasis placed on the changes which have been implemented. The changes were applied to the systems and operating methods which evolved from the design, startup, and operation of the Oak Ridge Gaseous Diffusion Plant in 1945

Better fuel handling system performance through improved elastomers and seals

Energy Technology Data Exchange (ETDEWEB)

Wensel, R G; Metcalfe, R [Atomic Energy of Canada Ltd., Chalk River, ON (Canada)

1997-12-31

In the area of elastomers, tests have identified specific compounds that perform well in each class of CANDU service. They offer gains in service life, sometimes by factors of ten or more. Moreover, the aging characteristics of these specific compounds are being thoroughly investigated, whereas many elastomers used previously were either non-specific or their aging was unknown. In this paper the benefits of elastomer upgrading, as well as the deficiencies of current station elastomer practices, are discussed in the context of fuel handling equipment. Guidelines for procurement, storage, handling and condition monitoring of elastomer seals are outlined. (author). 3 figs.

Better fuel handling system performance through improved elastomers and seals

International Nuclear Information System (INIS)

Wensel, R.G.; Metcalfe, R.

1996-01-01

In the area of elastomers, tests have identified specific compounds that perform well in each class of CANDU service. They offer gains in service life, sometimes by factors of ten or more. Moreover, the aging characteristics of these specific compounds are being thoroughly investigated, whereas many elastomers used previously were either non-specific or their aging was unknown. In this paper the benefits of elastomer upgrading, as well as the deficiencies of current station elastomer practices, are discussed in the context of fuel handling equipment. Guidelines for procurement, storage, handling and condition monitoring of elastomer seals are outlined. (author). 3 figs

Long-term efficacy of an ergonomics program that includes patient-handling devices on reducing musculoskeletal injuries to nursing personnel.

Science.gov (United States)

Garg, Arun; Kapellusch, Jay M

2012-08-01

The aim of this study was to evaluate long-term efficacy of an ergonomics program that included patient-handling devices in six long-term care facilities (LTC) and one chronic care hospital (CCH). Patient handling is recognized as a major source of musculoskeletal disorders (MSDs) among nursing personnel, and several studies have demonstrated effectiveness of patient-handling devices in reducing those MSDs. However, most studies have been conducted in a single facility, for a short period, and/or without a comprehensive ergonomics program. Patient-handling devices along with a comprehensive ergonomics program was implemented in six LTC facilities and one CCH. Pre- and postintervention injury data were collected for 38.9 months (range = 29 to 54 months) and 51.2 months (range = 36 to 60 months), respectively. Postintervention patient-handling injuries decreased by 59.8% (rate ratio [RR] = 0.36, 95% confidence interval [CI] [0.28, 0.49], p nursing staff were fairly low. A vast majority of patients found the devices comfortable and safe. Longer transfer times with the use of devices was not an issue. Implementation of patient-handling devices along with a comprehensive program can be effective in reducing MSDs among nursing personnel. Strategies to expand usage of patient-handling devices in most health care settings should be explored.

7 CFR 205.201 - Organic production and handling system plan.

Science.gov (United States)

2010-01-01

... MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED... or handling operation, except as exempt or excluded under § 205.101, intending to sell, label, or... implemented to comply with the requirements established in § 205.103; (5) A description of the management...

Do management practices support or constrain safe driving behaviour? A multi-level investigation in a sample of occupational drivers.

Science.gov (United States)

Newnam, Sharon; Warmerdam, Amanda; Sheppard, Dianne; Griffin, Mark; Stevenson, Mark

2017-05-01

It has been estimated that one-third of all work-related deaths occur while driving for work-related purposes. Despite this, many organisations are unaware of the practices, beyond those that identify and control the impact of unforeseen events (i.e., risk management), that predispose drivers to risk. This study addresses the issue by identifying the management practices operationalised as, High Performance Workplace Systems (HPWS) that influence safe driver behaviour. The study also explores the value given to safety by senior level management as a moderator of the relationship between HPWS practices and driver behaviour. Each factor was tested within a two level hierarchical model consisting of 911 drivers, nested within 161 supervisors and 83 organisations. The findings highight that under conditions of high investment in job and work design, communication and selection practices, drivers reported poorer driving behaviour. An interaction effect also demonstrated that under conditions of high investment in remuneration, drivers reported safer behaviour, but only when they perceived that managers valued and prioritised safety. The findings challenge current thinking in the management of workplace road safety. Copyright © 2017 Elsevier Ltd. All rights reserved.

Flexible Electrostatic Technologies for Capture and Handling, Phase 1

Science.gov (United States)

Bryan, Thomas

2015-01-01

Fundamental to many of NASA's in-space transportation missions is the capture and handling of various objects and vehicles in various orbits for servicing, debris disposal, sample retrieval, and assembly without the benefit of sufficient grapple fixtures and docking ports. To perform similar material handling tasks on Earth, pincher grippers, suction grippers, or magnetic chucks are used, but are unable to reliably grip aluminum and composite spacecraft, insulation, radiators, solar arrays, or extra-terrestrial objects in the vacuum of outer space without dedicated handles in the right places. The electronic Flexible Electrostatic Technologies for space Capture and Handling (FETCH) will enable reliable and compliant gripping (soft dock) of practically any object in various orbits or surfaces without dedicated mechanical features, very low impact capture, and built-in proximity sensing without any conventional actuators. Originally developed to handle semiconductor and glass wafers during vacuum chamber processing without contamination, the normal rigid wafer handling chucks are replaced with thin metal foil segments laminated in flexible insulation driven by commercial off-the-shelf solid state, high-voltage power supplies. Preliminary testing in NASA Marshall Space Flight Center's (MSFC's) Flat Floor Robotics Lab demonstrated compliant alignment and gripping with a full-sized, 150-lb microsat mockup and translation before a clean release with a flip of a switch. The flexible electrostatic gripper pads can be adapted to various space applications with different sizes, shapes, and foil electrode layouts even with openings through the gripper pads for addition of guidance sensors or injection of permanent adhesives. With gripping forces estimated between 0.5 and 2.5 lb/in2 or 70-300 lb/ft2 of surface contact, the FETCH can turn on and off rapidly and repeatedly to enable sample handling, soft docking, in-space assembly, precision relocation, and surface translation

SIMULATION OF DRIVER’S LOCOMOTIVE-HANDLING ACTIVITY USING THE THEORY OF FUZZY GRAPHS

Directory of Open Access Journals (Sweden)

T. V. Butko

2015-03-01

Full Text Available Purpose. The efficiency and safety of locomotive control improving is important and relevant scientific and practical problem. Every driver during the trains-handling bases on his experience and knowledge, that is why the compilation and detection the most efficient ways to control the locomotive-handling is one of the stages of measures development to reduce transportation costs. The purpose of this paper is a formalization process description of locomotive-handling and quality parameters determination of this process. Methodology. In order to achieve this goal the theory of fuzzy probabilistic graphs was used. Vertices of the graph correspond to the events start and end operations at train-handling. The graph arcs describe operations on train-handling. Graph consists of thirteen peaks corresponding to the main control actions of the engine-driver. The weighting factors of transitions between vertices are assigned by fuzzy numbers. Their values were obtained by expert estimates. Fuzzy probabilities and transition time are presented as numbers with trapezoidal membership function. Findings. Using successive merging of parallel arcs, loops and vertices elimination, the equivalent fuzzy graph of train-handling and the corresponding L-matrix were obtained. Equivalent graph takes into account separately activity of the driver during normal operation and during emergency situations. Originality. The theoretical foundations of describing process formalization in driver’s locomotive-handling activity were developed using the fuzzy probabilistic graph. The parameters characterizing the decision-making process of engineer were obtained. Practical value. With the resulting model it is possible to estimate the available reserves for the quality improvement of locomotive-handling. Reduction in the time for decision-making will lead to the approximation the current mode of control to the rational one and decrease costs of hauling operations. And reduction

Recommended Practices for the Safe Design and Operation of Flywheels

Energy Technology Data Exchange (ETDEWEB)

Bender, Donald Arthur [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-12-01

Flywheel energy storage systems are in use globally in increasing numbers . No codes pertaining specifically to flywheel energy storage exist. A number of industrial incidents have occurred. This protocol recommends a technical basis for safe flywheel de sign and operation for consideration by flywheel developers, users of flywheel systems and standards setting organizations.

The safe handling of radioisotopes

Energy Technology Data Exchange (ETDEWEB)

NONE

1964-12-31

A narrative account of a minor contamination accident in a laboratory is used to demonstrate the important role of radiation protection measures in radioisotope work and the necessity of giving proper regard to such measures. It is primarily directed towards the research scientists and medical workers using radioisotopes on a relatively small scale

Synthetic torpor: A method for safely and practically transporting experimental animals aboard spaceflight missions to deep space

Science.gov (United States)

Griko, Yuri; Regan, Matthew D.

2018-02-01

Animal research aboard the Space Shuttle and International Space Station has provided vital information on the physiological, cellular, and molecular effects of spaceflight. The relevance of this information to human spaceflight is enhanced when it is coupled with information gleaned from human-based research. As NASA and other space agencies initiate plans for human exploration missions beyond low Earth orbit (LEO), incorporating animal research into these missions is vitally important to understanding the biological impacts of deep space. However, new technologies will be required to integrate experimental animals into spacecraft design and transport them beyond LEO in a safe and practical way. In this communication, we propose the use of metabolic control technologies to reversibly depress the metabolic rates of experimental animals while in transit aboard the spacecraft. Compared to holding experimental animals in active metabolic states, the advantages of artificially inducing regulated, depressed metabolic states (called synthetic torpor) include significantly reduced mass, volume, and power requirements within the spacecraft owing to reduced life support requirements, and mitigated radiation- and microgravity-induced negative health effects on the animals owing to intrinsic physiological properties of torpor. In addition to directly benefitting animal research, synthetic torpor-inducing systems will also serve as test beds for systems that may eventually hold human crewmembers in similar metabolic states on long-duration missions. The technologies for inducing synthetic torpor, which we discuss, are at relatively early stages of development, but there is ample evidence to show that this is a viable idea and one with very real benefits to spaceflight programs. The increasingly ambitious goals of world's many spaceflight programs will be most quickly and safely achieved with the help of animal research systems transported beyond LEO; synthetic torpor may

Safe sleep practices in a New Zealand community and development of a Sudden Unexpected Death in Infancy (SUDI) risk assessment instrument.

Science.gov (United States)

Galland, Barbara C; Gray, Andrew; Sayers, Rachel M; Heath, Anne-Louise M; Lawrence, Julie; Taylor, Rachael; Taylor, Barry J

2014-10-13

Interventions to prevent sudden unexpected death in infancy (SUDI) have generally been population wide interventions instituted after case-control studies identified specific childcare practices associated with sudden death. While successful overall, in New Zealand (NZ), the rates are still relatively high by international comparison. This study aims to describe childcare practices related to SUDI prevention messages in a New Zealand community, and to develop and explore the utility of a risk assessment instrument based on international guidelines and evidence. Prospective longitudinal study of 209 infants recruited antenatally. Participant characteristics and infant care data were collected by questionnaire at: baseline (third trimester), and monthly from infant age 3 weeks through 23 weeks. Published meta-analyses data were used to estimate individual risk ratios for 6 important SUDI risk factors which, when combined, yielded a "SUDI risk score". Most infants were at low risk for SUDI with 72% at the lowest or slightly elevated risk (combined risk ratio ≤1.5). There was a high prevalence of the safe practices: supine sleeping (86-89% over 3-19 weeks), mother not smoking (90-92% over 3-19 weeks), and not bed sharing at a young age (87% at 3 weeks). Five independent predictors of a high SUDI risk score were: higher parity (P =0.028), younger age (P =0.030), not working or caring for other children antenatally (P =0.031), higher depression scores antenatally (P =0.036), and lower education (P =0.042). Groups within the community identified as priorities for education about safe sleep practices beyond standard care are mothers who are young, have high parity, low educational levels, and have symptoms of depression antenatally. These findings emphasize the importance of addressing maternal depression as a modifiable risk factor in pregnancy.

Safe male circumcision in Botswana: tension between traditional practices and biomedical marketing.

Science.gov (United States)

Katisi, Masego; Daniel, Marguerite

2015-01-01

Botswana has been running Safe Male Circumcision (SMC) since 2009 and has not yet met its target. Donors like the US Centers for Disease Control and Prevention and Africa Comprehensive HIV/AIDS Partnership (funded by the Gates Foundation) in collaboration with Botswana's Ministry of Health have invested much to encourage HIV-negative men to circumcise. Demand creation strategies make use of media and celebrities. The objective of this paper is to explore responses to SMC in relation to circumcision as part of traditional initiation practices. More specifically, we present the views of two communities in Botswana on SMC consultation processes, implementation procedures and campaign strategies. The methods used include participant observation, in-depth interviews with key stakeholders (donors, implementers and Ministry officials), community leaders and men in the community. We observe that consultation with traditional leaders was done in a seemingly superficial, non-participatory manner. While SMC implementers reported pressure to deliver numbers to the World Health Organization, traditional leaders promoted circumcision through their routine traditional initiation ceremonies at breaks of two-year intervals. There were conflicting views on public SMC demand creation campaigns in relation to the traditional secrecy of circumcision. In conclusion, initial cooperation of local chiefs and elders turned into resistance.

Recommendations for cask features for robotic handling from the Advanced Handling Technology Project

International Nuclear Information System (INIS)

Drotning, W.

1991-02-01

This report describes the current status and recent progress in the Advanced Handling Technology Project (AHTP) initiated to explore the use of advanced robotic systems and handling technologies to perform automated cask handling operations at radioactive waste handling facilities, and to provide guidance to cask designers on the impact of robotic handling on cask design. Current AHTP tasks have developed system mock-ups to investigate robotic manipulation of impact limiters and cask tiedowns. In addition, cask uprighting and transport, using computer control of a bridge crane and robot, were performed to demonstrate the high speed cask transport operation possible under computer control. All of the current AHTP tasks involving manipulation of impact limiters and tiedowns require robotic operations using a torque wrench. To perform these operations, a pneumatic torque wrench and control system were integrated into the tool suite and control architecture of the gantry robot. The use of captured fasteners is briefly discussed as an area where alternative cask design preferences have resulted from the influence of guidance for robotic handling vs traditional operations experience. Specific robotic handling experiences with these system mock-ups highlight a number of continually recurring design principles: (1) robotic handling feasibility is improved by mechanical designs which emphasize operation with limited dexterity in constrained workspaces; (2) clearances, tolerances, and chamfers must allow for operations under actual conditions with consideration for misalignment and imprecise fixturing; (3) successful robotic handling is enhanced by including design detail in representations for model-based control; (4) robotic handling and overall quality assurance are improved by designs which eliminate the use of loose, disassembled parts. 8 refs., 15 figs

Safe operation of critical assemblies and research reactors. Code of practice and Technical appendix. 1971 ed

International Nuclear Information System (INIS)

Cox, J.

1971-01-01

This book is in two parts. The first is a Code of Practice for the Safe Operation of Critical Assemblies and Research Reactors, prepared as a result of a meeting of experts which took place in Vienna on 20-24 May 1968. The Code has been prepared by the International Atomic Energy Agency in co-operation with the World Health Organization, and its publication is sponsored by both organizations. In addition, the Code was approved by the Board of Governors of the International Atomic Energy Agency on 16 December 1968 as part of the Agency's safety standards, which are applied to operations undertaken by Member States with the assistance of the Agency. The Board, in approving the publication of the present book, also recommended Member States to take the Code into account in the formulation of national regulations and recommendations. The second part of the book is a Technical Appendix to give information and illustrative samples that would be helpful in implementing the Code of Practice. This second part, although published under the same cover, is not part of the Code. An extensive Bibliography, amplifying the Technical Appendix, is included at the end.

Remote-handled transuranic waste study

International Nuclear Information System (INIS)

1995-10-01

The Waste Isolation Pilot Plant (WIPP) was developed by the US Department of Energy (DOE) as a research and development facility to demonstrate the safe disposal of transuranic (TRU) radioactive wastes generated from the Nation's defense activities. The WIPP disposal inventory will include up to 250,000 cubic feet of TRU wastes classified as remote handled (RH). The remaining inventory will include contact-handled (CH) TRU wastes, which characteristically have less specific activity (radioactivity per unit volume) than the RH-TRU wastes. The WIPP Land Withdrawal Act (LWA), Public Law 102-579, requires a study of the effect of RH-TRU waste on long-term performance. This RH-TRU Waste Study has been conducted to satisfy the requirements defined by the LWA and is considered by the DOE to be a prudent exercise in the compliance certification process of the WIPP repository. The objectives of this study include: conducting an evaluation of the impacts of RH-TRU wastes on the performance assessment (PA) of the repository to determine the effects of Rh-TRU waste as a part of the total WIPP disposal inventory; and conducting a comparison of CH-TRU and RH-TRU wastes to assess the differences and similarities for such issues as gas generation, flammability and explosiveness, solubility, and brine and geochemical interactions. This study was conducted using the data, models, computer codes, and information generated in support of long-term compliance programs, including the WIPP PA. The study is limited in scope to post-closure repository performance and includes an analysis of the issues associated with RH-TRU wastes subsequent to emplacement of these wastes at WIPP in consideration of the current baseline design. 41 refs

Food handling in the household environment as a vulnerability factor to foodborne diseases

Directory of Open Access Journals (Sweden)

Carla Rosane Paz Arruda Teo

2016-06-01

Full Text Available Introduction: the concept of food security and nutrition is based on the regular and sufficient access to food of adequate quality and it implies food safety as one of its dimensions. Objective: to analyze the sanitary and hygienic conditions of food handling in households in Chapecó (SC, Brazil. Materials and Methods: descriptive study with 138 households selected by systematic sampling to a 5% significance level and a 4% acceptable error. We applied a questionnaire to the person who was the responsible for food handling in each household. We used descriptive and inferential statistics and we interpreted the data according to health vulnerability framework. Results: we highlight that 50.7% (n=70 reported to just wash vegetables with water, 71% (n=98 reported to wash cutting boards with detergent and cold water, 33, 3% (n=46 reported the use of raw eggs. There was no association between the source of water supply and sanitary failures observed. Conclusions: safe food handling procedures are not adopted in a reasonable proportion of households, which may explain the vulnerability to foodborne diseases in these environments.

Safe medication management in specialized home healthcare - an observational study.

Science.gov (United States)

Lindblad, Marléne; Flink, Maria; Ekstedt, Mirjam

2017-08-24

Medication management is a complex, error-prone process. The aim of this study was to explore what constitutes the complexity of the medication management process (MMP) in specialized home healthcare and how healthcare professionals handle this complexity. The study is theoretically based in resilience engineering. Data were collected during the MMP at three specialized home healthcare units in Sweden using two strategies: observation of workplaces and shadowing RNs in everyday work, including interviews. Transcribed material was analysed using grounded theory. The MMP in home healthcare was dynamic and complex with unclear boundaries of responsibilities, inadequate information systems and fluctuating work conditions. Healthcare professionals adapted their everyday clinical work by sharing responsibility and simultaneously being authoritative and preserving patients' active participation, autonomy and integrity. To promote a safe MMP, healthcare professionals constantly re-prioritized goals, handled gaps in communication and information transmission at a distance by creating new bridging solutions. Trade-offs and workarounds were necessary elements, but also posed a threat to patient safety, as these interim solutions were not systematically evaluated or devised learning strategies. To manage a safe medication process in home healthcare, healthcare professionals need to adapt to fluctuating conditions and create bridging strategies through multiple parallel activities distributed over time, space and actors. The healthcare professionals' strategies could be integrated in continuous learning, while preserving boundaries of safety, instead of being more or less interim solutions. Patients' and family caregivers' as active partners in the MMP may be an underestimated resource for a resilient home healthcare.

Deploying Information Technology for Latent Poisoning Aversion during Handling and/or Usage of Agrochemicals

OpenAIRE

Nyagudi, Nyagudi Musandu

2014-01-01

Insights into safe use and handling of agrochemicals at of the year 2003 Paper Presented at two fora : Association of Medical Engineering of Kenya (AMEK), 2nd Annual Symposium and Exhibition held at the Nairobi Hospital from 28th to 30th October 2003 The Kenya ICT in Agriculture Conference. Theme : “Improving Agriculture in Kenya through Information & Communication Technology”. The 1st Annual ICT in Agriculture Conference, AMREF Training Centre, Nairobi, Kenya 29-30 October 2003 Orga...

327 Building liquid waste handling options modification project plan

International Nuclear Information System (INIS)

Ham, J.E.

1998-01-01

This report evaluates the modification options for handling radiological liquid waste (RLW) generated during decontamination and cleanout of the 327 Building. The overall objective of the 327 Facility Stabilization Project is to establish a passively safe and environmentally secure configuration of the 327 Facility. The issue of handling of RLW from the 327 Facility (assuming the 34O Facility is not available to accept the RLW) has been conceptually examined in at least two earlier engineering studies (Parsons 1997a and Hobart l997). Each study identified a similar preferred alternative that included modifying the 327 Facility RLWS handling systems to provide a truck load-out station, either within the confines of the facility or exterior to the facility. The alternatives also maximized the use of existing piping, tanks, instrumentation, controls and other features to minimize costs and physical changes. An issue discussed in each study involved the anticipated volume of the RLW stream. Estimates ranged between 113,550 and 387,500 liters in the earlier studies. During the development of the 324/327 Building Stabilization/Deactivation Project Management Plan, the lower estimate of approximately 113,550 liters was confirmed and has been adopted as the baseline for the 327 Facility RLW stream. The goal of this engineering study is to reevaluate the existing preferred alternative and select a new preferred alternative, if appropriate. Based on the new or confirmed preferred alternative, this study will also provide a conceptual design and cost estimate for required modifications to the 327 Facility to allow removal of RLWS and treatment of the RLW generated during deactivation

Safe transport of radioactive materials

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-12-31

The film shows the widespread use of radioactive materials in industry, medicine and research and explains the need for transporting nuclear material from producer to user. It shows the way in which packages containing radioactive materials are handled during transport and explains the most important provisions of the IAEA transport regulations, safety series no. 6, such as packaging design criteria and testing requirements, illustrated by various tests carried out, specimen packages and package and freight container labelling. Also illustrated are practical measures to be taken in case of an accident

How to handle station black outs

Energy Technology Data Exchange (ETDEWEB)

Reisch, Frigyes [Swedish Nuclear Power Inspectorate, S-10252 Stockholm (Sweden)

1986-02-15

Station black out is defined as the loss of ail high voltage alternating current at a nuclear power site. An international study was made to survey the practices in the different countries. The best way to handle station black out is to avoid it therefore briefly the normal off site and emergency on site power supplies are discussed. The ways in use to enhance nuclear power plants using Boiling Water Reactors or Pressurized Water Reactors to cope with a station black out are discussed in some detail. (author)

How to handle station black outs

International Nuclear Information System (INIS)

Reisch, Frigyes

1986-01-01

Station black out is defined as the loss of ail high voltage alternating current at a nuclear power site. An international study was made to survey the practices in the different countries. The best way to handle station black out is to avoid it therefore briefly the normal off site and emergency on site power supplies are discussed. The ways in use to enhance nuclear power plants using Boiling Water Reactors or Pressurized Water Reactors to cope with a station black out are discussed in some detail. (author)

SRTC criticality technical review: Nuclear Criticality Safety Evaluation 93-18 Uranium Solidification Facility's Waste Handling Facility

International Nuclear Information System (INIS)

Rathbun, R.

1993-01-01

Separate review of NMP-NCS-930058, open-quotes Nuclear Criticality Safety Evaluation 93-18 Uranium Solidification Facility's Waste Handling Facility (U), August 17, 1993,close quotes was requested of SRTC Applied Physics Group. The NCSE is a criticality assessment to determine waste container uranium limits in the Uranium Solidification Facility's Waste Handling Facility. The NCSE under review concludes that the NDA room remains in a critically safe configuration for all normal and single credible abnormal conditions. The ability to make this conclusion is highly dependent on array limitation and inclusion of physical barriers between 2x2x1 arrays of boxes containing materials contaminated with uranium. After a thorough review of the NCSE and independent calculations, this reviewer agrees with that conclusion

Analysis of ITER upper port plug remote handling maintenance scenarios

International Nuclear Information System (INIS)

Koning, J.F.; Baar, M.R. de; Elzendoorn, B.S.Q.; Heemskerk, C.J.M.; Ronden, D.M.S.; Schuth, W.J.

2012-01-01

Highlights: ► Remote Handling Study Centre: providing RH compatibility analysis. ► Simulation: virtual reality including kinematics and realtime physics simulator. ► Applied on analysis of RH compatibility of Upper Launcher component replacement. ► Resulting in lowered maintenance procedure time and lessons learned. - Abstract: The ITER tokamak has a modular design, with port plugs, blanket modules and divertor cassettes. This set-up allows for maintenance of diagnostics, heating systems and first wall elements. The maintenance can be done in situ, or in the Hot Cell. Safe and effective remote handling (RH) will be ensured by the RH requirements and standards. Compliance is verified through remote handling compatibility assessments at the ITER Design Review milestones. The Remote Handling Study Centre at FOM Institute DIFFER is created to study ITER RH maintenance processes at different levels of complexity, from relatively simple situational awareness checks using snap-shots in the CAD system, time studies using virtual reality (VR) animations, to extensive operational sequence validation with multiple operators in real-time. The multi-operator facility mimics an RH work-cell as presently foreseen in the ITER RH control room. Novel VR technology is used to create a realistic setting in which a team of RH operators can interact with virtual ITER environments. A physics engine is used to emulate real-time contact interaction as to provide realistic haptic feed-back. Complex interactions between the RH operators and the control room system software are tested. RH task performance is quantified and operational resource usage estimated. The article provides a description and lessons learned from a recent study on replacement of the Steering Mirror Assembly on the ECRH (Electron Cyclotron Resonance Heating) Upper Launcher port plug.

Analysis of ITER upper port plug remote handling maintenance scenarios

Energy Technology Data Exchange (ETDEWEB)

Koning, J.F., E-mail: j.f.koning@heemskerk-innovative.nl [FOM Institute DIFFER - Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Baar, M.R. de; Elzendoorn, B.S.Q. [FOM Institute DIFFER - Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Heemskerk, C.J.M. [Heemskerk Innovative Technology, Noordwijk (Netherlands); Ronden, D.M.S.; Schuth, W.J. [FOM Institute DIFFER - Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands)

2012-08-15

Highlights: Black-Right-Pointing-Pointer Remote Handling Study Centre: providing RH compatibility analysis. Black-Right-Pointing-Pointer Simulation: virtual reality including kinematics and realtime physics simulator. Black-Right-Pointing-Pointer Applied on analysis of RH compatibility of Upper Launcher component replacement. Black-Right-Pointing-Pointer Resulting in lowered maintenance procedure time and lessons learned. - Abstract: The ITER tokamak has a modular design, with port plugs, blanket modules and divertor cassettes. This set-up allows for maintenance of diagnostics, heating systems and first wall elements. The maintenance can be done in situ, or in the Hot Cell. Safe and effective remote handling (RH) will be ensured by the RH requirements and standards. Compliance is verified through remote handling compatibility assessments at the ITER Design Review milestones. The Remote Handling Study Centre at FOM Institute DIFFER is created to study ITER RH maintenance processes at different levels of complexity, from relatively simple situational awareness checks using snap-shots in the CAD system, time studies using virtual reality (VR) animations, to extensive operational sequence validation with multiple operators in real-time. The multi-operator facility mimics an RH work-cell as presently foreseen in the ITER RH control room. Novel VR technology is used to create a realistic setting in which a team of RH operators can interact with virtual ITER environments. A physics engine is used to emulate real-time contact interaction as to provide realistic haptic feed-back. Complex interactions between the RH operators and the control room system software are tested. RH task performance is quantified and operational resource usage estimated. The article provides a description and lessons learned from a recent study on replacement of the Steering Mirror Assembly on the ECRH (Electron Cyclotron Resonance Heating) Upper Launcher port plug.

The FMEA Analysis for Fuel Handling System at Cernavoda Unit 2

International Nuclear Information System (INIS)

Park, Jin Hee; Kim, Tae Woon; Rhee, Bo Wook; Yoon, Chul; Kim, Hyeong Tae; Cho, In Gil; Kim, Seong Ho

2006-01-01

A Nuclear Safety Evaluation was performed by an independent assessor at the request of the regulatory authority CNCAN (Comisia Nationala pentru Controlul Activitatilor Nucleare. National Committee for Nuclear Activities Control in Romania) to provide an independent overview of all the nuclear safety aspects of Cernavoda Unit 2 under construction and an expert opinion whether the completed Cernavoda Unit-2 Nuclear Power Plant would satisfy current Western European nuclear safety objectives and practices. A report was produced (Cernavoda 2 Nuclear Safety Expert Project, 'Task 10 . Safety Evaluation Report', A.F.Parsons, NNC Limited, December 2001) and contains recommendations either mandatory or advisory. The FMEA study, one of the mandatory recommendations, is performing now for fuel handling system and radioactive waste handling system for Cernavoda unit 2 in Romania sponsored by KHNP. In this paper, only the FMEA study for fuel handling system is presented

Area 5 Radioactive Waste Management Site Safety Assessment Document

International Nuclear Information System (INIS)

Horton, K.K.; Kendall, E.W.; Brown, J.J.

1980-02-01

The Area 5 Radioactive Waste Management Safety Assessment Document evaluates site characteristics, facilities and operating practices which contribute to the safe handling and storage/disposal of radioactive wastes at the Nevada Test Site. Physical geography, cultural factors, climate and meteorology, geology, hydrology (with emphasis on radionuclide migration), ecology, natural phenomena, and natural resources are discussed and determined to be suitable for effective containment of radionuclides. Also considered, as a separate section, are facilities and operating practices such as monitoring; storage/disposal criteria; site maintenance, equipment, and support; transportation and waste handling; and others which are adequate for the safe handling and storage/disposal of radioactive wastes. In conclusion, the Area 5 Radioactive Waste Management Site is suitable for radioactive waste handling and storage/disposal for a maximum of twenty more years at the present rate of utilization

Waste Handling Equipment Development Test and Evaluation Study

International Nuclear Information System (INIS)

R.L. Tome

1998-01-01

The purpose of this study is to identify candidate Monitored Geologic Repository (MGR) surface waste handling equipment for development testing. This study will also identify strategies for performing the development tests. Development testing shall be implemented to support detail design and reduce design risks. Development testing shall be conducted to confirm design concepts, evaluate alternative design concepts, show the availability of needed technology, and provide design documentation. The candidate equipment will be selected from MGR surface waste handling equipment that is the responsibility of the Management and Operating Contractor (M and O) Surface Design Department. The equipment identified in this study is based on Viability Assessment (VA) design. The ''Monitored Geologic Repository Test and Evaluation Plan'' (MGR T and EP), Reference 5.1, was used as a basis for this study. The MGR T and EP reflects the extent of test planning and analysis that can be conducted, given the current status of the MGR requirements and latest VA design information. The MGR T and EP supports the appropriate sections in the license application (LA) in accordance with 10 CFR 60.2 1(c)(14). The MGR T and EP describes the following test activities: site characterization to confirm, by test and analysis, the suitability of the Yucca Mountain site for housing a geologic repository; development testing to investigate and document design concepts to reduce risk; qualification testing to verify equipment compliance with design requirements, specifications, and regulatory requirements; system testing to validate compliance with MGR requirements, which include the receipt, handling, retrieval, and disposal of waste; periodic performance testing to verify preclosure requirements and to demonstrate safe and reliable MGR operation; and performance confirmation modeling, testing, and analysis to verify adherence to postclosure regulatory requirements. Development test activities can be

Practical handling of AIO admixtures – Guidelines on Parenteral Nutrition, Chapter 10

Directory of Open Access Journals (Sweden)

Stanga, Z.

2009-11-01

Full Text Available All-in-one admixtures (AIO-admixtures provide safe, effective and low-risk PN (parenteral nutrition for practically all indications and applications. Water, energy (carbohydrates and lipids, amino acids, vitamins and trace elements are infused together with PN either as industrially-manufactured AIO admixtures provided as two- or three-chamber bags (shelf life usually more than 12 months completed with electrolytes and micronutrients where appropriate or as individually compounded ready-to-use AIO admixtures (compounding, usually prepared by a pharmacy on either a daily or weekly basis and stored at 2–8°C. Physico-chemical and microbial stability of an AIO admixture is essential for the safety and effectiveness of patient-specific PN, and its assurance requires specialist pharmaceutical knowledge. The stability should be documented for an application period of 24 (–48 hours. It is advisable to offer a limited selection of different PN regimes in each hospital. For reasons of drug and medication safety, PN admixtures prepared for individual patients must be correctly labelled and specifications for storage conditions must also be followed during transport. Monitoring is required where applicable. Micronutrients are usually administered separately to AIO admixtures. In case compatibility and stability have been well documented trace elements and/or combination preparations including water-soluble or water-soluble/fat soluble vitamin supplements can be added to PN admixtures under strict aseptic conditions. AIO admixtures are usually not used as vehicles for drugs (incompatibilities.

Health physics considerations in UF{sub 6} handling

Energy Technology Data Exchange (ETDEWEB)

Bailey, J.C. [Norway Assoicates, Inc., Oak Ridge, TN (United States)

1991-12-31

Uranium is a radioactive substance that emits alpha particles and very small amounts of gamma radiation. Its daughter products emit beta and gamma radiation. In uranium handling operations these are the radiations one must consider. This presentation will review the characteristics of the radiations, the isotopes from which they originate, the growth and decay of the uranium daughter products, and some specific health physics practices dictated by these factors.

Development of first full scope commercial CANDU-6 fuel handling simulator

Energy Technology Data Exchange (ETDEWEB)

Crawford, W., E-mail: BCrawford@atlanticnuclear.ca [Atlantic Nuclear Services Inc., Fredericton, NB (Canada); McInerney, J. M., E-mail: JMcInerney@nbpower.com [Point Lepreau Generating Station, Maces Bay, NB (Canada); Moran, E.S.; Nice, J. W.; Sinclair, D.M.; Somerville, S.; Usalp, E.C.; Usalp, M., E-mail: EMoran@atlanticnuclear.ca, E-mail: JNice@atlanticnuclear.ca, E-mail: DSinclair@atlanticnuclear.ca, E-mail: SSomerville@atlanticnuclear.ca, E-mail: ECUsalp@atlanticnuclear.ca, E-mail: MUsalp@atlanticnuclear.ca [Atlantic Nuclear Services Inc., Fredericton, NB (Canada)

2015-07-01

Unique to CANDU reactors is continuous on-power refueling. In the CANDU-6 design, the fuel bundles are contained within 380 pressure tubes. Fuelling machines, one on either side of the reactor face move on a bridge and carriage system to the appointed channel and fuel under computer control. The fuelling machine is an immensely complicated mechanical device. None of the original Canadian full scope simulators incorporated the interaction of the fuel handling system. Traditionally, the final stages of Fuel Handling Operator qualification utilizes on the job training in a production environment carried out in the station main control room. For the purpose of supporting continual improvement in fuel handling training at the Third Qinshan Nuclear Plant Company (TQNPC), Atlantic Nuclear Services in a joint project with New Brunswick Power, developed the first commercial full scope CANDU-6 Fuel Handling simulator, integrated into the existing TQNPC Full Scope Simulator framework. The TQNPC Fuel Handling simulator is capable of supporting all normal on-power and off-power refuelling procedures as well as other abnormal operating conditions, which will allow training to be conducted, based on the plant specific operating procedures. This paper will discuss its development, the importance of this tool and its advantages over past training practices. (author)

Development of first full scope commercial CANDU-6 fuel handling simulator

International Nuclear Information System (INIS)

Crawford, W.; McInerney, J. M.; Moran, E.S.; Nice, J. W.; Sinclair, D.M.; Somerville, S.; Usalp, E.C.; Usalp, M.

2015-01-01

Unique to CANDU reactors is continuous on-power refueling. In the CANDU-6 design, the fuel bundles are contained within 380 pressure tubes. Fuelling machines, one on either side of the reactor face move on a bridge and carriage system to the appointed channel and fuel under computer control. The fuelling machine is an immensely complicated mechanical device. None of the original Canadian full scope simulators incorporated the interaction of the fuel handling system. Traditionally, the final stages of Fuel Handling Operator qualification utilizes on the job training in a production environment carried out in the station main control room. For the purpose of supporting continual improvement in fuel handling training at the Third Qinshan Nuclear Plant Company (TQNPC), Atlantic Nuclear Services in a joint project with New Brunswick Power, developed the first commercial full scope CANDU-6 Fuel Handling simulator, integrated into the existing TQNPC Full Scope Simulator framework. The TQNPC Fuel Handling simulator is capable of supporting all normal on-power and off-power refuelling procedures as well as other abnormal operating conditions, which will allow training to be conducted, based on the plant specific operating procedures. This paper will discuss its development, the importance of this tool and its advantages over past training practices. (author)

Safety Analysis of 'Older/Aged' Handling and Transportation Equipment for Heavy Loads, Radioactive Waste and Materials in Accordance with German Nuclear Standards KTA 3902, 3903 and 3905

International Nuclear Information System (INIS)

Macias, P.; Prucker, E.; Stang, W.

2006-01-01

The purpose of this paper is to present a general safety analysis of important handling and transportation processes and their related equipment ('load chains' consisting of cranes, load-bearing equipment and load-attaching points). This project was arranged by the responsible Bavarian ministry for environment, health and consumer protection (StMUGV) in agreement with the power plant operators of all Bavarian nuclear power plants to work out potential safety improvements. The range of the equipment (e.g. reactor building, crane, refuelling machine, load-bearing equipment and load-attaching points) covers the handling and transportation of fuel elements (e. g. with fuel flasks), heavy loads (e.g. reactor pressure vessel closure head, shielding slabs) and radioactive materials and waste (e.g. waste flasks, control elements, fuel channels, structure elements). The handling equipment was subjected to a general safety analysis taking into account the ageing of the equipment and the progress of standards. Compliance with the current valid requirements of the state of science and technology as required by German Atomic Act and particularly of the nuclear safety KTA-standards (3902, 3903 and 3905) was examined. The higher protection aims 'safe handling and transportation of heavy loads and safe handling of radioactive materials and waste' of the whole analysis are to avoid a criticality accident, the release of radioactivity and inadmissible effects on important technical equipment and buildings. The scope of the analysis was to check whether these protection aims were fulfilled for all important technical handling and transportation processes. In particularly the design and manufacturing of the components and the regulations of the handling itself were examined. (authors)

Analysis of Handling Processes of Record Versions in NoSQL Databases

Directory of Open Access Journals (Sweden)

Yu. A. Grigorev

2015-01-01

its right bound of the confidence interval on the average deliberation time have a pronounced maximum. In the same variant an average handling time of record versions practically does not depend on the average deliberation time, but the right bound of the confidence interval of this time has a pronounced minimum.

Transfer pricing and safe harbours

Directory of Open Access Journals (Sweden)

Veronika Solilová

2013-01-01

Full Text Available Transfer prices are significant for both taxpayers and tax administrations because they determine in large part taxable profits of associated enterprises in different tax jurisdictions. Moreover, in the context of taxation, transfer prices must be complied with the arm’s length principle. However, Multinational Enterprises have been faced daily by conflicting rules and approaches to applying the arm’s length principle, burdensome documentation requirements, inconsistent audit standards and unpredictable competent authority outcomes. Therefore, the Committee on Fiscal Affairs launched another project on the administrative aspects of transfer pricing in 2010. On 16 May 2013 as a partial solution of this project was approved by the OECD Council the Revised Section E on Safe Harbours in Chapter IV of the Transfer Pricing Guidelines for Multinational Enterprises and Tax Authorities. The paper is focused on significant changes of newly approved chapter IV of the Transfer Pricing Guidelines for Multinational Enterprises and Tax Authorities, further on analysis of practice in this area, on advantages and disadvantages of safe harbours for taxpayers and competent authorities with aim to suggest recommendations on use of safe harbours in the Czech Republic.

76 FR 81904 - Solicitation of New Safe Harbors and Special Fraud Alerts

Science.gov (United States)

2011-12-29

... Medicaid Patient and Program Protection Act of 1987, Public Law 100-93 Sec. 14, the Act, Sec. 1128B(b), 42...-called ``safe harbor'' provisions, specifying various payment and business practices that, although... basis for administrative sanctions. OIG safe harbor provisions have been developed ``to limit the reach...

Innovative measures undertaken for improvement of working conditions and equipment's at Quality Control Program (QCP), BRIT

International Nuclear Information System (INIS)

Reddy, B.H.; Jaiswar, N.M.

2009-01-01

Mixing of organic and aqueous phases using suction pumps/suction line available in the fume hoods in lieu of the hand-pump and plastic bellows hitherto used for the purpose of solvent extraction generator for 99m Tc. This minimizes exposure of the personnel to the radiation hazard by reducing the actual physical handling and time of exposure. Use of specially fabricated PVC long handled rod for safe operation of nozzles used in solvent extraction assembly for extraction of 99m Tc from 99 Mo. In the past, direct handling of knobs was the practice which was unsafe with respect to both dose and physical maneuvering between operator and assembly. The working conditions and safe practice in managing radioactive waste are discussed in the paper

Applying the intention-to-treat principle in practice: Guidance on handling randomisation errors.

Science.gov (United States)

Yelland, Lisa N; Sullivan, Thomas R; Voysey, Merryn; Lee, Katherine J; Cook, Jonathan A; Forbes, Andrew B

2015-08-01

The intention-to-treat principle states that all randomised participants should be analysed in their randomised group. The implications of this principle are widely discussed in relation to the analysis, but have received limited attention in the context of handling errors that occur during the randomisation process. The aims of this article are to (1) demonstrate the potential pitfalls of attempting to correct randomisation errors and (2) provide guidance on handling common randomisation errors when they are discovered that maintains the goals of the intention-to-treat principle. The potential pitfalls of attempting to correct randomisation errors are demonstrated and guidance on handling common errors is provided, using examples from our own experiences. We illustrate the problems that can occur when attempts are made to correct randomisation errors and argue that documenting, rather than correcting these errors, is most consistent with the intention-to-treat principle. When a participant is randomised using incorrect baseline information, we recommend accepting the randomisation but recording the correct baseline data. If ineligible participants are inadvertently randomised, we advocate keeping them in the trial and collecting all relevant data but seeking clinical input to determine their appropriate course of management, unless they can be excluded in an objective and unbiased manner. When multiple randomisations are performed in error for the same participant, we suggest retaining the initial randomisation and either disregarding the second randomisation if only one set of data will be obtained for the participant, or retaining the second randomisation otherwise. When participants are issued the incorrect treatment at the time of randomisation, we propose documenting the treatment received and seeking clinical input regarding the ongoing treatment of the participant. Randomisation errors are almost inevitable and should be reported in trial publications. The

Proper use of common image file formats in handling radiological images.

Science.gov (United States)

Faccioli, N; Perandini, S; Comai, A; D'Onofrio, M; Pozzi Mucelli, R

2009-04-01

This paper highlights the differences among the most common file formats used for storing digital radiological images. It promotes the proper use of these formats to guarantee easy manipulation in handling the most typical practical applications in daily radiological practice. The authors provide a simple yet exhaustive introduction to the concept of "file format" and describe the algorithms and main features of the most common formats (BMP, JPEG, GIF, DICOM, TIF, PNG) and Portable Network Graphics (PNG).The different formats are compared in terms of dimension, quality, portability and with reference to the following specific needs: electronic communications, publication on the World Wide Web, presentation of electronic posters, video presentations for teaching and manuscript publishing. We also illustrate how to handle the various formats with the programmes supplied with standard software installations.The large number of digital applications of image file formats calls for a simplification in daily radiological practice. We recommend the use of JPEG and PNG for electronic communications; PNG and GIF for publication on the worldwide web; JPEG and PNG for electronic poster presentations; DICOM, PNG and JPEG for teaching presentations; TIF and PNG for printing on paper.

Full scale tests on remote handled FFTF fuel assembly waste handling and packaging

International Nuclear Information System (INIS)

Allen, C.R.; Cash, R.J.; Dawson, S.A.; Strode, J.N.

1986-01-01

Handling and packaging of remote handled, high activity solid waste fuel assembly hardware components from spent FFTF reactor fuel assemblies have been evaluated using full scale components. The demonstration was performed using FFTF fuel assembly components and simulated components which were handled remotely using electromechanical manipulators, shielding walls, master slave manipulators, specially designed grapples, and remote TV viewing. The testing and evaluation included handling, packaging for current and conceptual shipping containers, and the effects of volume reduction on packing efficiency and shielding requirements. Effects of waste segregation into transuranic (TRU) and non-transuranic fractions also are discussed

Work-related musculoskeletal risks associated with nurses and nursing assistants handling overweight and obese patients: A literature review.

Science.gov (United States)

Choi, Sang D; Brings, Kathryn

2015-01-01

Nurses and nursing assistants are susceptible to work-related musculoskeletal disorders and injuries (WMSDs) due to the increase in overweight and obese patients they are handling on a daily basis. This study aimed to review work-related musculoskeletal hazards and risks associated with handling overweight and obese patients, and summarize the recommended interventions to mitigate musculoskeletal concerns among nurses and nursing assistants. Approximately 350 publications were initially screened and 22 refereed articles were used to synthesize for this study on the bases of inclusion/exclusion relevance and strength of evidence on overweight or obese patient handling. Evidence suggested that the work-related musculoskeletal risks among nurses and nursing assistants included sprains/strains, low back pain, wrist, knee and shoulder injuries. The findings indicated that the WMSD risks increased when nurses and nursing assistants were manually moving or lifting patients, especially when the patients were overweight or obese. The recommended solutions included the lifting/transfer equipment and devices, ergonomic assessments and controls, no-lift policies, and training and education. To alleviate the risk of musculoskeletal disorders and injuries among nurses and nursing assistants handling overweight or obese patients, additional research and development into what safe patient handling interventions suit this growing population needs to be addressed.

Safe injection procedures, injection practices, and needlestick ...

African Journals Online (AJOL)

Nermine Mohamed Tawfik Foda

2017-01-10

Jan 10, 2017 ... sures regarding disposable injection equipment, waste containers, hand hygiene ... injection practices lead to high prevalence of NSSIs in operating rooms. .... guidelines, the availability of training courses to HCWs, and provi-.

Management of tritium contaminated wastes national strategies and practices at some European countries, USA and Canada

International Nuclear Information System (INIS)

Mannone, F.

1992-01-01

The European Tritium Handling Experiment Laboratory (ETHEL) is the Commission of European Communities facility designed for handling multigram quantities of tritium for safety inherent R and D purposes. Tritium contamined wastes in gaseous, liquid and solid forms will be generated in ETHEL during the experiments as well as during the maintenance operations. All such wastes must be adequately managed under the safest operating conditions to minimize the releases of tritium to the environment and the consequent radiological risks to workers and general population. This safety requirement can be met by carefully defining strategies and practices to be applied for the safe management of these wastes. To this end an adequate background information must be collected which is the intent of this report. Through an exhaustive literature survey current strategies and practices applied in Europe, USA and Canada for managing tritiated wastes from specific tritium handling laboratories and plant have been assessed. For some countries, where only tritium bearing wastes simultaneously contaminated with nuclear fission products are generated, the attention has been focused on the strategies and practices currently applied for managing fission wastes. Operational criteria for waste collection, sorting, classification, conditioning and packaging as well as acceptance criteria for their storage or disposal have been identified. Waste storage or disposal options already applied in various countries or still being investigated in terms of safety have also been considered. Even if the radwaste management strategy is submitted to a nearly continuing process of review, some general comments resulting from the assessment of the present waste management scenario are presented. 60 refs., 16 figs., 13 tabs

System simulation on fractionation radiation doses and radioisotope handling in Nuclear medicine

International Nuclear Information System (INIS)

Dytz, Aline Guerra; Dullius, Marcos Alexandre; Gomes, Camila e Silva

2008-01-01

This paper describes the practical and theoretical learning of students from Medical Physics course at the Fundacao Universidade Federal do Rio Grande (FURG) on fractionation radiation doses, radioisotope handling and elution of molybdenum generators (Mo-99) / technetium (Tc -99m)

A mixed methods study of food safety knowledge, practices and beliefs in Hispanic families with young children.

Science.gov (United States)

Stenger, Kristen M; Ritter-Gooder, Paula K; Perry, Christina; Albrecht, Julie A

2014-12-01

Children are at a higher risk for foodborne illness. The objective of this study was to explore food safety knowledge, beliefs and practices among Hispanic families with young children (≤10 years of age) living within a Midwestern state. A convergent mixed methods design collected qualitative and quantitative data in parallel. Food safety knowledge surveys were administered (n = 90) prior to exploration of beliefs and practices among six focus groups (n = 52) conducted by bilingual interpreters in community sites in five cities/towns. Descriptive statistics determined knowledge scores and thematic coding unveiled beliefs and practices. Data sets were merged to assess concordance. Participants were female (96%), 35.7 (±7.6) years of age, from Mexico (69%), with the majority having a low education level. Food safety knowledge was low (56% ± 11). Focus group themes were: Ethnic dishes popular, Relating food to illness, Fresh food in home country, Food safety practices, and Face to face learning. Mixed method analysis revealed high self confidence in preparing food safely with low safe food handling knowledge and the presence of some cultural beliefs. On-site Spanish classes and materials were preferred venues for food safety education. Bilingual food safety messaging targeting common ethnic foods and cultural beliefs and practices is indicated to lower the risk of foodborne illness in Hispanic families with young children. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Human Factors on the Flight Deck Safe Piloting Behaviour in Practice

CERN Document Server

Scheiderer, Joachim

2013-01-01

What is for a professional pilot required to fly as safe as possible? Written by pilots the book gives a detailed introduction into the basics of accident prevention in air traffic. Explicit background knowledge as well as detailed listings of safety relevant features in human behaviour are included.

Ranking of healthcare programmes based on health outcome, health costs and safe delivery of care in hospital pharmacy practice.

Science.gov (United States)

Brisseau, Lionel; Bussières, Jean-François; Bois, Denis; Vallée, Marc; Racine, Marie-Claude; Bonnici, André

2013-02-01

To establish a consensual and coherent ranking of healthcare programmes that involve the presence of ward-based and clinic-based clinical pharmacists, based on health outcome, health costs and safe delivery of care. This descriptive study was derived from a structured dialogue (Delphi technique) among directors of pharmacy department. We established a quantitative profile of healthcare programmes at five sites that involved the provision of ward-based and clinic-based pharmaceutical care. A summary table of evidence established a unique quality rating per inpatient (clinic-based) or outpatient (ward-based) healthcare programme. Each director rated the perceived impact of pharmaceutical care per inpatient or outpatient healthcare programme on three fields: health outcome, health costs and safe delivery of care. They agreed by consensus on the final ranking of healthcare programmes. A ranking was assigned for each of the 18 healthcare programmes for outpatient care and the 17 healthcare programmes for inpatient care involving the presence of pharmacists, based on health outcome, health costs and safe delivery of care. There was a good correlation between ranking based on data from a 2007-2008 Canadian report on hospital pharmacy practice and the ranking proposed by directors of pharmacy department. Given the often limited human and financial resources, managers should consider the best evidence available on a profession's impact to plan healthcare services within an organization. Data are few on ranking healthcare programmes in order to prioritize which healthcare programme would mostly benefit from the delivery of pharmaceutical care by ward-based and clinic-based pharmacists. © 2012 The Authors. IJPP © 2012 Royal Pharmaceutical Society.

Semi-automatic handling of meteorological ground measurements using WeatherProg: prospects and practical implications

Science.gov (United States)

Langella, Giuliano; Basile, Angelo; Bonfante, Antonello; De Mascellis, Roberto; Manna, Piero; Terribile, Fabio

2016-04-01

WeatherProg is a computer program for the semi-automatic handling of data measured at ground stations within a climatic network. The program performs a set of tasks ranging from gathering raw point-based sensors measurements to the production of digital climatic maps. Originally the program was developed as the baseline asynchronous engine for the weather records management within the SOILCONSWEB Project (LIFE08 ENV/IT/000408), in which daily and hourly data where used to run water balance in the soil-plant-atmosphere continuum or pest simulation models. WeatherProg can be configured to automatically perform the following main operations: 1) data retrieval; 2) data decoding and ingestion into a database (e.g. SQL based); 3) data checking to recognize missing and anomalous values (using a set of differently combined checks including logical, climatological, spatial, temporal and persistence checks); 4) infilling of data flagged as missing or anomalous (deterministic or statistical methods); 5) spatial interpolation based on alternative/comparative methods such as inverse distance weighting, iterative regression kriging, and a weighted least squares regression (based on physiography), using an approach similar to PRISM. 6) data ingestion into a geodatabase (e.g. PostgreSQL+PostGIS or rasdaman). There is an increasing demand for digital climatic maps both for research and development (there is a gap between the major of scientific modelling approaches that requires digital climate maps and the gauged measurements) and for practical applications (e.g. the need to improve the management of weather records which in turn raises the support provided to farmers). The demand is particularly burdensome considering the requirement to handle climatic data at the daily (e.g. in the soil hydrological modelling) or even at the hourly time step (e.g. risk modelling in phytopathology). The key advantage of WeatherProg is the ability to perform all the required operations and

Handling Procedures of Vegetable Crops

Science.gov (United States)

Perchonok, Michele; French, Stephen J.

2004-01-01

The National Aeronautics and Space Administration (NASA) is working towards future long duration manned space flights beyond low earth orbit. The duration of these missions may be as long as 2.5 years and will likely include a stay on a lunar or planetary surface. The primary goal of the Advanced Food System in these long duration exploratory missions is to provide the crew with a palatable, nutritious, and safe food system while minimizing volume, mass, and waste. Vegetable crops can provide the crew with added nutrition and variety. These crops do not require any cooking or food processing prior to consumption. The vegetable crops, unlike prepackaged foods, will provide bright colors, textures (crispy), and fresh aromas. Ten vegetable crops have been identified for possible use in long duration missions. They are lettuce, spinach, carrot, tomato, green onion, radish, bell pepper, strawberries, fresh herbs, and cabbage. Whether these crops are grown on a transit vehicle (e.g., International Space Station) or on the lunar or planetary surface, it will be necessary to determine how to safely handle the vegetables while maintaining acceptability. Since hydrogen peroxide degrades into water and oxygen and is generally recognized as safe (GRAS), hydrogen peroxide has been recommended as the sanitizer. The objective of th is research is to determine the required effective concentration of hydrogen peroxide. In addition, it will be determined whether the use of hydrogen peroxide, although a viable sanitizer, adversely affects the quality of the vegetables. Vegetables will be dipped in 1 % hydrogen peroxide, 3% hydrogen peroxide, or 5% hydrogen peroxide. Treated produce and controls will be stored in plastic bags at 5 C for up to 14 days. Sensory, color, texture, and total plate count will be measured. The effect on several vegetables including lettuce, radish, tomato and strawberries has been completed. Although each vegetable reacts to hydrogen peroxide differently, the

Role of non-destructive examinations in leak testing of glove boxes for industrial scale plutonium handling at nuclear fuel fabrication facility along with case study

International Nuclear Information System (INIS)

Aher, Sachin

2015-01-01

Non Destructive Examinations has the prominent role at Nuclear Fuel Fabrication Facilities. Specifically NDE has contributed at utmost stratum in Leak Testing of Glove Boxes and qualifying them as a Class-I confinement for safe Plutonium handling at industrial scale. Advanced Fuel Fabrication Facility, BARC, Tarapur is engaged in fabrication of Plutonium based MOX (PuO 2 , DDUO 2 ) fuel with different enrichments for first core of PFBR reactor. Alpha- Leak Tight Glove Boxes along with HEPA Filters and dynamic ventilation form the promising engineering system for safe and reliable handling of plutonium bearing materials considering the radiotoxicity and risk associated with handling of plutonium. Leak Testing of Glove Boxes which involves the leak detection, leak rectification and leak quantifications is major challenging task. To accomplish this challenge, various Non Destructive Testing methods have assisted in promising way to achieve the stringent leak rate criterion for commissioning of Glove Box facilities for plutonium handling. This paper highlights the Role of various NDE techniques like Soap Solution Test, Argon Sniffer Test, Pressure Drop/Rise Test etc. in Glove Box Leak Testing along with procedure and methodology for effective rectification of leakage points. A Flow Chart consisting of Glove Box leak testing procedure starting from preliminary stage up to qualification stage along with a case study and observations are discussed in this paper. (author)

Emergency Victim Care. A Training Manual for Emergency Medical Technicians. Module 2. Equipment, Safe Driving Practices, Legal Aspects, Controlling the Situation, Action Evaluation Conference. Revised.

Science.gov (United States)

Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

This student manual, the second in a set of 14 modules, is designed to train emergency medical technicians (EMTs) in Ohio. The module contains five sections that cover the following course content: ambulance equipment, safe driving practices for emergency vehicle drivers, legal aspects of the EMT's job, how to maintain control at an accident scene…

Is gender a risk factor for pesticide intoxications among farmers in Bolivia?

DEFF Research Database (Denmark)

Jørs, Erik; Hay-Younes, Jasmin; Condarco, Madelaine A

2013-01-01

This study compares gender differences regarding knowledge, practice, and symptoms of intoxication when handling pesticides in farming. Data were gathered in La Paz County, Bolivia, in 2008 and 2009. Poor knowledge on safe handling, hazardous working practices, and use of very toxic pesticides were...... symptoms. To minimize this gap, education and agricultural services should be made more accessible to female farmers in Bolivia....

Farmers’ Knowledge on Pesticide Safety and Pest Management Practices: A Case Study of Vegetable Growers in Chitwan, Nepal

Directory of Open Access Journals (Sweden)

Jhalendra P. Rijal

2018-01-01

Full Text Available Farmers’ knowledge on pesticides and their safe use are critical for implementing effective pest management program. A household survey was conducted using the semi-structured questionnaire to evaluate vegetable growers’ knowledge on pesticide safety and pest management practices in Nepal. Results indicated that chemical pesticides were the primary choice of over 80% growers for pest management. Notably, 90% growers were aware of adverse effects of pesticides on human health and to the environment. Over 84% growers used at least one form of personal protection equipment (PPE during pesticide spray or handling, although the quality and appropriateness of the PPE warrants further investigation. Nearly 17% growers received at least one short-term training on integrated pest management (IPM; however, all of them neither knew the harmful effects of pesticide residues nor practiced proper pesticide disposal methods. Over 90% of growers rely on local pesticide retailers (i.e., Agro-vets for technical know-how about pesticide selection, handling, and use. This study highlighted a need for immediate implementation of strict pesticide use regulations and recommended educational programs for pest control professionals, growers, and pesticide retailers.

Instructional maps of safe working methods and practices for separate types of opera-tions conducted in the oil mine

Directory of Open Access Journals (Sweden)

И. В. Климова

2017-06-01

Full Text Available Instructing personnel in the issues of labor protection and industrial safety at hazardous facilities is one of the main tasks that face the employer; the quality with which this procedure is organized and carried out defines not only company’s indicators, but the mere possibility of its normal functioning. The paper contains a detailed overview of the typical content of standard documentation, which is currently used when conducting operations in the oil mines of Yarega high-viscosity oil deposit. Distinct features and unique nature of this oil field require special measures to guarantee safety of personnel and all facilities in general.The author proposes and reviews an additional type of operating guidelines – instructional map of safe working methods and practices. It is more illustrative than existing documentation (charts of inclined shaft development, labor protection regulations, which allows to upgrade the process of instructing personnel in the oil mines, to improve the quality of instructions and to reduce the risk of emergencies, accidents, industrial injuries.The author reviews the structure of suggested instructional map, offers a detailed arrangement diagram for the main thematic sections of the map, as well as their content. Instructional maps are regarded as a type of operating guidelines that include: description and characteristics of equipment, instruments and appliances; general safety requirements; content and execution sequence of operational elements with their graphical images; distribution of responsibilities with an indication of their priority in case the operations are conducted by several workers; specific safety requirements for equipment, materials, instruments, safety clothes and footwear, personal protective gear etc. (prohibitions, warnings.Advantages and disadvantages of proposed instructional maps of safe working methods and practices are highlighted.

Clinical Decision Support and Optional Point of Care Testing of Renal Function for Safe Use of Antibiotics in Elderly Patients : A Retrospective Study in Community Pharmacy Practice

NARCIS (Netherlands)

Heringa, Mette; Floor-Schreudering, Annemieke; De Smet, Peter A G M; Bouvy, Marcel L

2017-01-01

OBJECTIVE: The aim was to investigate the management of drug therapy alerts on safe use of antibiotics in elderly patients with (potential) renal impairment and the contribution of optional creatinine point of care testing (PoCT) in community pharmacy practice. METHODS: Community pharmacists used a

Ergonomic material-handling device

Science.gov (United States)

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

Development and perceived effects of an educational programme on quality and safety in medication handling in residential facilities.

Science.gov (United States)

Mygind, Anna; El-Souri, Mira; Rossing, Charlotte; Thomsen, Linda Aagaard

2018-04-01

To develop and test an educational programme on quality and safety in medication handling for staff in residential facilities for the disabled. The continuing pharmacy education instructional design model was used to develop the programme with 22 learning objectives on disease and medicines, quality and safety, communication and coordination. The programme was a flexible, modular seven + two days' course addressing quality and safety in medication handling, disease and medicines, and medication supervision and reconciliation. The programme was tested in five Danish municipalities. Municipalities were selected based on their application for participation; each independently selected a facility for residents with mental and intellectual disabilities, and a facility for residents with severe mental illnesses. Perceived effects were measured based on a questionnaire completed by participants before and after the programme. Effects on motivation and confidence as well as perceived effects on knowledge, skills and competences related to medication handling, patient empowerment, communication, role clarification and safety culture were analysed conducting bivariate, stratified analyses and test for independence. Of the 114 participants completing the programme, 75 participants returned both questionnaires (response rate = 66%). Motivation and confidence regarding quality and safety in medication handling significantly improved, as did perceived knowledge, skills and competences on 20 learning objectives on role clarification, safety culture, medication handling, patient empowerment and communication. The programme improved staffs' motivation and confidence and their perceived ability to handle residents' medication safely through improved role clarification, safety culture, medication handling and patient empowerment and communication skills. © 2017 Royal Pharmaceutical Society.

A prospective three-step intervention study to prevent medication errors in drug handling in paediatric care.

Science.gov (United States)

Niemann, Dorothee; Bertsche, Astrid; Meyrath, David; Koepf, Ellen D; Traiser, Carolin; Seebald, Katja; Schmitt, Claus P; Hoffmann, Georg F; Haefeli, Walter E; Bertsche, Thilo

2015-01-01

To prevent medication errors in drug handling in a paediatric ward. One in five preventable adverse drug events in hospitalised children is caused by medication errors. Errors in drug prescription have been studied frequently, but data regarding drug handling, including drug preparation and administration, are scarce. A three-step intervention study including monitoring procedure was used to detect and prevent medication errors in drug handling. After approval by the ethics committee, pharmacists monitored drug handling by nurses on an 18-bed paediatric ward in a university hospital prior to and following each intervention step. They also conducted a questionnaire survey aimed at identifying knowledge deficits. Each intervention step targeted different causes of errors. The handout mainly addressed knowledge deficits, the training course addressed errors caused by rule violations and slips, and the reference book addressed knowledge-, memory- and rule-based errors. The number of patients who were subjected to at least one medication error in drug handling decreased from 38/43 (88%) to 25/51 (49%) following the third intervention, and the overall frequency of errors decreased from 527 errors in 581 processes (91%) to 116/441 (26%). The issue of the handout reduced medication errors caused by knowledge deficits regarding, for instance, the correct 'volume of solvent for IV drugs' from 49-25%. Paediatric drug handling is prone to errors. A three-step intervention effectively decreased the high frequency of medication errors by addressing the diversity of their causes. Worldwide, nurses are in charge of drug handling, which constitutes an error-prone but often-neglected step in drug therapy. Detection and prevention of errors in daily routine is necessary for a safe and effective drug therapy. Our three-step intervention reduced errors and is suitable to be tested in other wards and settings. © 2014 John Wiley & Sons Ltd.

Safe procedure development to manage hazardous drugs in the workplace

Directory of Open Access Journals (Sweden)

Marisa Gaspar Carreño

2017-03-01

Full Text Available Objective: To develop a safety working procedure for the employees in the Intermutual Hospital de Levante (HIL in those areas of activity that deal with the handling of hazardous drugs (MP. Methods: The procedure was developed in six phases: 1 hazard definition; 2 definition and identification of processes and development of general correct work practices about hazardous drugs’ selection and special handling; 3 detection, selection and set of specific recommendations to handle with hazardous drugs during the processes of preparation and administration included in the hospital GFT; 4 categorization of risk during the preparation/administration and development of an identification system; 5 information and training of professionals; 6 implementation of the identification measures and prevention guidelines. Results: Six processes were detected handling HD. During those processes, thirty HD were identified included in the hospital GFT and a safer alternative was found for 6 of them. The HD were classified into 4 risk categories based on those measures to be taken during the preparation and administration of each of them. Conclusions: The development and implementation of specific safety-work processes dealing with medication handling, allows hospital managers to accomplish effectively with their legal obligations about the area of prevention and provides healthcare professional staff with the adequate techniques and safety equipment to avoid possible dangers and risks of some drugs.

Remote handling installation of diagnostics in the JET Tokamak

Energy Technology Data Exchange (ETDEWEB)

Allan, P., E-mail: Peter.Allan@ccfe.ac.uk [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); CCFE, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Loving, A.B. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); CCFE, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Omran, H. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Oxford Technologies Ltd, 7 Nuffield Way, Abingdon OX14 1RJ (United Kingdom); Collins, S.; Thomas, J. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); CCFE, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Parsloe, A.; Merrigan, I. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); British Nuclear Services, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Hassall, I. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Oxford Technologies Ltd, 7 Nuffield Way, Abingdon OX14 1RJ (United Kingdom)

2011-10-15

The requirement for an upgrade of the diagnostics for the JET ITER Like Wall (ILW) while maintaining personnel exposure to contamination as low as reasonably practicable or ALARP, has necessitated the development of a bespoke set of diagnostic components. These components, by virtue of their design and location, require a versatile yet comprehensive suite of remote handling tools to undertake their in-vessel installation. The installation of the various diagnostic components is covered in multiple tasks. Each task requires careful assessment and design of tools that can successfully interface with the components and comply with the handling and installation requirements. With remote maintenance a requirement, the looms/conduits were designed to be modular with connections which are electrically connected when the module is fitted or conversely disconnected when removed. The shape of each complex and often bulky component is verified during the design phase, to ensure that it can be delivered and installed to its specified location in the torus. This is done by matching the kinematic capabilities of the remote handling system and the path of the component through the torus by using a state of the art virtual reality system.

Light water ultra-safe plant concept: First annual report

International Nuclear Information System (INIS)

Klevans, E.

1987-01-01

Since the accident at Three Mile Island (TMI) Penn State Nuclear Engineering Department Faculty and Staff have considered various methods to improve already safe reactor designs and public perception of the safety of Nuclear Power. During the last year, the Department of Energy funded the study of a plant reconfiguration originally proposed by M.A. Shultz. This report presents the status of the project at the end of the first year. A broad set of specifications to improve safety and public perception were set forth and the realization of these goals is achieved in a plant design named, ''The Light Water Ultra-Safe Plant Concept.'' The most significant goals of the concept address the station black-out problem and simplification of required operator actions during abnormal situations. These goals are achieved in the Ultra-Safe Concept by addition of an in-containment atmospheric tank containing a large quantity of cool water, replacement of the conventional PWR pressurizer system with a pressurizing pump, internal emergency power generation, and arrangement of components to utilize natural circulation at shut-down. The first year effort included an evaluation of the normal operation characteristics of the primary system pressurizing concept, evaluating parameters and modeling for analysis of the shutdown scenario, design of a low power density core, design of a low-pressure waste handling system, arrangement of a drainage system for pipe break considerations, and failure modes and effects analysis

Guide to the safe handling of radioactive wastes at nuclear power plants

International Nuclear Information System (INIS)

1980-01-01

This guide discusses the responsibilities of the regulatory authorities, the design considerations of waste management systems and the source and characteristics of waste. Present techniques for treating, conditioning, storing and disposing of gaseous, liquid and solid wastes on and from the site are summarized, and a consensus of good practice in waste management based on current knowledge and experience is given. The guide also contains brief chapters on transport of wastes, monitoring systems, safety analyses and a review of future trends in waste management

Arkansas People Participating in Lead Education (APPLE): results of a lead-safe training program.

Science.gov (United States)

Ferguson, Alesia; Bursac, Zoran; Kern, David F

2011-06-01

Lead is still seen as one of the most harmful environmental toxins for young children, with the predominant source being deteriorating lead-based paint. Those at continued risk include those living in homes built before 1978, renovators and remodelers, and especially those with limited access to proper healthcare and diets. Proper training on lead-safe work practices focused on preventing and reducing the spread of lead dust can help reduce lead exposure. Presented in this paper are experiences in delivering lead-safe work practices training in six Arkansas cities, and results from pre- and post- surveys delivered before and immediately after the training. Pre- and post-surveys assess strong and weak areas of training. Participants demonstrated positive shifts in attitude and behavior towards lead-safe work practices following training. However, our research found that more emphasis should be focused on clarifying current lead exposure sources and routes for children.

Advantage of redundancy in the controllability of remote handling manipulator

International Nuclear Information System (INIS)

Muhammad, Ali; Mattila, Jouni; Vilenius, Matti; Siuko, Mikko; Semeraro, Luigi

2011-01-01

To carry out a variety of remote handling operations inside the ITER divertor a Water Hydraulic MANipulator (WHMAN) and its control system have been designed and developed at Tampere University of Technology. The manipulator is installed on top of Cassette Multifunctional Mover (CMM) to assist during the cassette removal and installation operations. While CMM is designed to carry heavy components such as cassettes through the service ducts relying on positioning accuracy and repeatability, WHMAN is designed to execute a mix of remote handling operations using position trajectories and master-slave telemanipulation. WHMAN is composed of eight joints: six rotational and two translational. Since a manipulator requires only six joints to acquire the desired position and orientation in operational-space, the two additional joints of WHMAN provide the redundant degrees of mobility. This paper presents how this redundancy of WHMAN can be an advantage to optimize the execution of remote handling tasks. The paper also discusses an effective way to practically exploit the redundancy. The results show that the additional degrees of freedom can be utilized to improve the dynamic behavior of the manipulator.

Methods and apparatus for safely handling radioactive sources in measuring-while-drilling tools

International Nuclear Information System (INIS)

Wraight, P.D.

1989-01-01

This patent describes a method for removing a chemical radioactive source from a MWD tool which is coupled in a drill string supported by a drilling rig while a borehole is drilled and includes logging means for measuring formation characteristics in response to irradiation of the adjacent formations by the radioactive source during the drilling operation. The steps of the method are: halting the drilling operation and then removing the drill string from the borehole for moving the MWD tool to a work station at the surface where the source is at a safe working distance from the drilling rig and will be accessible by way of one end of the MWD tool; positioning a radiation shield at a location adjacent to the one end of the MWD tool where the shield is ready for receiving the source as it is moved away from the other end of the MWD tool and then moving the source away from the other end of the MWD tool for enclosing the source within the shield; and once the source is enclosed within the shield; removing the shield together with the enclosed source from the MWD tool for transferring the enclosed source to another work station

Handling and processing of radioactive waste from nuclear applications

International Nuclear Information System (INIS)

2001-01-01

The main objective of this report is to provide technical information and reference material on different steps and components of radioactive waste management for staff in establishments that use radionuclides and in research centres in Member States. It provides technical information on the safe handling, treatment, conditioning and storage of waste arising from the various activities associated with the production and application of radioisotopes in medical, industrial, educational and research facilities. The technical information cited in this report consists mainly of processes that are commercialised or readily available, and can easily be applied as they are or modified to solve specific waste management requirements. This report covers the sources and characteristics of waste and approaches to waste classification, and describes the particular processing steps from pretreatment until storage of conditioned packages

30o inclination in handles of plastic boxes can reduce postural and muscular workload during handling

Directory of Open Access Journals (Sweden)

Luciana C. C. B. Silva

2013-06-01

Full Text Available BACKGROUND: The handling of materials, which occurs in the industrial sector, is associated with lesions on the lumbar spine and in the upper limbs. Inserting handles in industrial boxes is a way to reduce work-related risks. Although the position and angle of the handles are significant factors in comfort and safety during handling, these factors have rarely been studied objectively. OBJECTIVE: To compare the handling of a commercial box and prototypes with handles and to evaluate the effects on upper limb posture, muscle electrical activity, and perceived acceptability using different grips while handling materials from different heights. METHOD: Thirty-seven healthy volunteers evaluated the handles of prototypes that allowed for changes in position (top and bottom and angle (0°, 15°, and 30°. Wrist, elbow, and shoulder movements were evaluated using electrogoniometry and inclinometry. The muscle electrical activity in the wrist extensors, biceps brachii, and the upper portion of the trapezius was measured using a portable electromyographer. The recorded data on muscle movements and electrical activity were synchronized. Subjective evaluations of acceptability were evaluated using a visual analog scale. RESULTS AND CONCLUSIONS: The prototypes with handles at a 30° angle produced the highest acceptability ratings, more neutral wrist positions, lower levels of electromyographic activity for the upper trapezius, and lower elevation angles for the arms. The different measurement methods were complementary in evaluating the upper limbs during handling.

New transport and handling contract

CERN Multimedia

SC Department

2008-01-01

A new transport and handling contract entered into force on 1.10.2008. As with the previous contract, the user interface is the internal transport/handling request form on EDH: https://edh.cern.ch/Document/TransportRequest/ To ensure that you receive the best possible service, we invite you to complete the various fields as accurately as possible and to include a mobile telephone number on which we can reach you. You can follow the progress of your request (schedule, completion) in the EDH request routing information. We remind you that the following deadlines apply: 48 hours for the transport of heavy goods (up to 8 tonnes) or simple handling operations 5 working days for crane operations, transport of extra-heavy goods, complex handling operations and combined transport and handling operations in the tunnel. For all enquiries, the number to contact remains unchanged: 72202. Heavy Handling Section TS-HE-HH 72672 - 160319

To practice mobility

DEFF Research Database (Denmark)

Winther, Ida Wentzel

2015-01-01

Children’s perspectives are practically absent in new mobility studies. In this article, I wish to describe and analyze how a number of children handle having to move between homes, parents and siblings, and how they practically, emotionally and socially navigate in this changeable landscape. My...

76 FR 12719 - Safe Schools/Healthy Students Program; Office of Safe and Drug-Free Schools; Safe Schools/Healthy...

Science.gov (United States)

2011-03-08

... DEPARTMENT OF EDUCATION Safe Schools/Healthy Students Program; Office of Safe and Drug- Free Schools; Safe Schools/Healthy Students Program; Catalog of Federal Domestic Assistance (CFDA) Numbers: 84... priorities, requirements, and definitions under the Safe Schools/Healthy Students (SS/HS) program. Since...

Assessment of the safety of injection practices and injection-related procedures in family health units and centers in Alexandria.

Science.gov (United States)

Elhoseeny, Taghareed A; Mourad, Juidan K

2014-08-01

The Safe Injection Global Network (SIGN) developed an intervention strategy for reducing overuse of injections and promoting the administration of safe injections. Tool C--Revised is designed to assess the safety of the most common procedures that puncture the skin within health services. The aim of the study was to assess injection safety within the primary healthcare facilities in Alexandria using Tool C--Revised. A total of 45 family health units and centers in Alexandria were selected by proportional allocation from the eight regions of Alexandria. The Tool C--Revised of the WHO was used for observation of the entire facility, injection practices and injection-related procedures, and sterilization practices. Interview of different health providers and immediate supervisor of injections was carried out. Indicators that reflect risk included: deficiency of alcohol-based hand rub for cleansing hands (13.3%), compliance with hand wash before preparing a procedure (56.9% before injection practices, 61.3% before phlebotomy, and 67.6% before lancet puncture), and wearing a new pair of gloves before new procedures (48.6% before injection practices, 9.7% for phlebotomy, 11.8% for lancet puncture, and 80% for both intravenous injections and infusions). Enough disposable equipment in all facilities for at least 2 weeks dependent on the statement of the average numbers of procedures per week was shown. Only 38% of the providers had received training regarding injection safety in the last 2 years and 62.5% had completed their three doses of hepatitis B vaccine. Only 42.2% of staffs who handled healthcare waste had access to heavy gloves. Indicators related to injection and injection-related practices that reflect risk to patients include deficiency of alcohol-based hand rub tools, nonadherence to hand hygiene before preparing an injection, and inadequate adherence to using a clean barrier when opening a glass ampule and use of gloves. Indicators that may reflect risk to

Trends in Modern Exception Handling

Directory of Open Access Journals (Sweden)

Marcin Kuta

2003-01-01

Full Text Available Exception handling is nowadays a necessary component of error proof information systems. The paper presents overview of techniques and models of exception handling, problems connected with them and potential solutions. The aspects of implementation of propagation mechanisms and exception handling, their effect on semantics and general program efficiency are also taken into account. Presented mechanisms were adopted to modern programming languages. Considering design area, formal methods and formal verification of program properties we can notice exception handling mechanisms are weakly present what makes a field for future research.

Potential exposure to Australian bat lyssavirus is unlikely to prevent future bat handling among adults in South East Queensland.

Science.gov (United States)

Young, M K; Banu, S; McCall, B J; Vlack, S; Carroll, H; Bennett, S; Davison, R; Francis, D

2018-02-01

Despite ongoing public health messages about the risks associated with bat contact, the number of potential exposures to Australian bat lyssavirus (ABLV) due to intentional handling by members of the general public in Queensland has remained high. We sought to better understand the reasons for intentional handling among these members of the public who reported their potential exposure to inform future public health messages. We interviewed adults who resided in a defined geographic area in South East Queensland and notified potential exposure to ABLV due to intentional handling of bats by telephone between 1 January 2012 and 31 December 2013. The participation rate was 54%. Adults who reported they had intentionally handled bats in South East Queensland indicated high levels of knowledge and perception of a moderately high risk associated with bats with overall low intentions to handle bats in the future. However, substantial proportions of people would attempt to handle bats again in some circumstances, particularly to protect their children or pets. Fifty-two percent indicated that they would handle a bat if a child was about to pick up or touch a live bat, and 49% would intervene if a pet was interacting with a bat. Future public health communications should recognize the situations in which even people with highrisk perceptions of bats will attempt to handle them. Public health messages currently focus on avoidance of bats in all circumstances and recommend calling in a trained vaccinated handler, but messaging directed at adults for circumstances where children or pets may be potentially exposed should provide safe immediate management options. © 2017 Blackwell Verlag GmbH.

Study of status of safe injection practice and knowledge regarding injection safety among primary health care workers in Baglung district, western Nepal.

Science.gov (United States)

Gyawali, Sudesh; Rathore, Devendra S; Kc, Bhuvan; Shankar, P Ravi

2013-01-03

Unsafe injection practices and injection overuse are widespread in developing countries harming the patient and inviting risks to the health care workers. In Nepal, there is a dearth of documented information about injection practices so the present study was carried out: a) to determine whether the selected government health facilities satisfy the conditions for safe injections in terms of staff training, availability of sterile injectable equipment and their proper disposal after use and b) to assess knowledge and attitudes of healthcare workers in these health care facilities with regard to injection safety. A descriptive cross-sectional mixed type (qualitative and quantitative) survey was carried out from 18th May to 16th June 2012. In-depth interviews with the in-charges were conducted using a semi-structured questionnaire. Observation of the health facilities using a structured observation tool was done. The data were analysed manually by summarizing, tabulating and presenting in various formats. The in-charges (eight males, two females) who participated in the study ranged in age from 30 to 50 years with a mean age of 37.8 years. Severe infection followed by pain was the most important cause for injection use with injection Gentamicin being most commonly prescribed. New single use (disposable) injections and auto-disable syringes were used to inject curative drugs and vaccines respectively. Sufficient safety boxes were also supplied to dispose the used syringe. All health care workers had received full course of Hepatitis B vaccine and were knowledgeable about at least one pathogen transmitted through unsafe injection practices. Injection safety management policy and waste disposal guideline was not available for viewing in any of the facilities. The office staff who disposed the bio-medical wastes did so without taking any safety measures. Moreover, none of these staff had received any formal training in waste management. Certain safe injection

Study of status of safe injection practice and knowledge regarding injection safety among primary health care workers in Baglung district, western Nepal

Directory of Open Access Journals (Sweden)

Gyawali Sudesh

2013-01-01

Full Text Available Abstract Background Unsafe injection practices and injection overuse are widespread in developing countries harming the patient and inviting risks to the health care workers. In Nepal, there is a dearth of documented information about injection practices so the present study was carried out: a to determine whether the selected government health facilities satisfy the conditions for safe injections in terms of staff training, availability of sterile injectable equipment and their proper disposal after use and b to assess knowledge and attitudes of healthcare workers in these health care facilities with regard to injection safety. Methodology A descriptive cross-sectional mixed type (qualitative and quantitative survey was carried out from 18th May to 16th June 2012. In-depth interviews with the in-charges were conducted using a semi-structured questionnaire. Observation of the health facilities using a structured observation tool was done. The data were analysed manually by summarizing, tabulating and presenting in various formats. Results The in-charges (eight males, two females who participated in the study ranged in age from 30 to 50 years with a mean age of 37.8 years. Severe infection followed by pain was the most important cause for injection use with injection Gentamicin being most commonly prescribed. New single use (disposable injections and auto-disable syringes were used to inject curative drugs and vaccines respectively. Sufficient safety boxes were also supplied to dispose the used syringe. All health care workers had received full course of Hepatitis B vaccine and were knowledgeable about at least one pathogen transmitted through unsafe injection practices. Injection safety management policy and waste disposal guideline was not available for viewing in any of the facilities. The office staff who disposed the bio-medical wastes did so without taking any safety measures. Moreover, none of these staff had received any formal

Final decommissioning of the former active handling Building A59 at UKAEA Winfrith

International Nuclear Information System (INIS)

Cornell, Rowland; Brown, Nick; Staples, Andy

2006-01-01

RWE NUKEM has been decommissioning the former active handling Building A59 at Winfrith since July 2000 for the site owners and nuclear site licence holders UKAEA, following a competitive tendering process. Following recent government changes the UK's Nuclear Decommissioning Authority has contracts with UKAEA for delivery of the site clean-up programme. Decommissioning work has centred upon two heavily shielded suites of caves originally used to carry out remote examination of irradiated nuclear fuel elements although other supporting facilities are also involved. Starting activity and contamination levels were extremely high in the two cave lines but decommissioning operations have steadily advanced and both facilities have now been decontaminated such that they are ready for demolition. The processes used to achieve this objective involved mainly standard off-the-shelf equipment but the work has demonstrated the importance of undertaking the task with the right tooling and lessons learnt will be described for the benefit of other operators. The essential challenge is always to achieve these objectives in a safe and cost-effective way whilst ensuring that the radiation exposure of the operators is kept as low as reasonably practicable (ALARP). This paper describes how the approach to cave line demolition had to be amended from the original plan owing to features of the original building design which provide structural support for the main fabric from the concrete cave line walls. As a result, the original plan to demolish the cave lines first could not be undertaken economically and the building itself will now be cleared, decontaminated and demolished ahead of these two major facilities. Considerable benefits have flowed from this decision and the paper will set out the advantages that have been gained, which may be of benefit to others carrying out similar tasks. Finally, the paper will explain how the achievement of cost-effective and safe solutions to all these

Remote handling machines

International Nuclear Information System (INIS)

Sato, Shinri

1985-01-01

In nuclear power facilities, the management of radioactive wastes is made with its technology plus the automatic techniques. Under the radiation field, the maintenance or aid of such systems is important. To cope with this situation, MF-2 system, MF-3 system and a manipulator system as remote handling machines are described. MF-2 system consists of an MF-2 carrier truck, a control unit and a command trailer. It is capable of handling heavy-weight objects. The system is not by hydraulic but by electrical means. MF-3 system consists of a four-crawler truck and a manipulator. The truck is versatile in its posture by means of the four independent crawlers. The manipulator system is bilateral in operation, so that the delicate handling is made possible. (Mori, K.)

Project Execution Plan for the Remote Handled Low-Level Waste Disposal Project

Energy Technology Data Exchange (ETDEWEB)

Danny Anderson

2014-07-01

and commercial disposal options exist for contact-handled LLW; however, offsite disposal options are either not currently available (i.e., commercial disposal facilities), practical, or cost-effective for all remote-handled LLW streams generated at INL. Offsite disposal of all INL and tenant-generated remote-handled waste is further complicated by issues associated with transporting highly radioactive waste in commerce; and infrastructure and processing changes at the generating facilities, specifically NRF, that would be required to support offsite disposal. The INL Remote-Handled LLW Disposal Project will develop a new remote handled LLW disposal facility to meet mission-critical, remote-handled LLW disposal needs. A formal DOE decision to proceed with the project has been made in accordance with the requirements of National Environmental Policy Act (42 USC§ 4321 et seq.). Remote-handled LLW is generated from nuclear programs conducted at INL, including spent nuclear fuel handling and operations at NRF and operations at the Advanced Test Reactor. Remote-handled LLW also will be generated by new INL programs and from segregation and treatment (as necessary) of remote handled scrap and waste currently stored in the Radioactive Scrap and Waste Facility at the Materials and Fuels Complex.

Test result communication in primary care: a survey of current practice.

Science.gov (United States)

Litchfield, Ian; Bentham, Louise; Lilford, Richard; McManus, Richard J; Hill, Ann; Greenfield, Sheila

2015-11-01

The number of blood tests ordered in primary care continues to increase and the timely and appropriate communication of results remains essential. However, the testing and result communication process includes a number of participants in a variety of settings and is both complicated to manage and vulnerable to human error. In the UK, guidelines for the process are absent and research in this area is surprisingly scarce; so before we can begin to address potential areas of weakness there is a need to more precisely understand the strengths and weaknesses of current systems used by general practices and testing facilities. We conducted a telephone survey of practices across England to determine the methods of managing the testing and result communication process. In order to gain insight into the perspectives from staff at a large hospital laboratory we conducted paired interviews with senior managers, which we used to inform a service blueprint demonstrating the interaction between practices and laboratories and identifying potential sources of delay and failure. Staff at 80% of practices reported that the default method for communicating normal results required patients to telephone the practice and 40% of practices required that patients also call for abnormal results. Over 80% had no fail-safe system for ensuring that results had been returned to the practice from laboratories; practices would otherwise only be aware that results were missing or delayed when patients requested results. Persistent sources of missing results were identified by laboratory staff and included sample handling, misidentification of samples and the inefficient system for collating and resending misdirected results. The success of the current system relies on patients both to retrieve results and in so doing alert staff to missing and delayed results. Practices appear slow to adopt available technological solutions despite their potential for reducing the impact of recurring errors in the

Handling the Misalignment of Interests in Assisted Reproductive Technology Practices

OpenAIRE

Pierson, Anne

2010-01-01

One of the major problems we see in the use of reproductive technology at this time is that there is very little regulation of embryo transfer practices that lead to multigestational pregnancies. While the FDA must approve assisted reproductive technology (ART) devices and drugs that stimulate ovulation, it has no jurisdiction over the practice of medicine, how these drugs and devices are used on the ground, often in off-label procedures. The only current regulation of these practices is at...

Cool and Safe: Multiplicity in Safe Innovation at Unilever

Science.gov (United States)

Penders, Bart

2011-01-01

This article presents the making of a safe innovation: the application of ice structuring protein (ISP) in edible ices. It argues that safety is not the absence of risk but is an active accomplishment; innovations are not "made safe afterward" but "safe innovations are made". Furthermore, there are multiple safeties to be accomplished in the…

Relationships between Safe Pesticide Practice and Perceived Benefits and Subjective Norm, and the Moderation Role of Information Acquisition: Evidence from 971 Farmers in China.

Science.gov (United States)

Wang, Jianhua; Deng, Yuanyuan; Ma, Yuting

2017-08-25

Improper use of pesticides among farmers has caused food safety issues which are serious threats to public health in China. A central question concerns how to motivate farmers to self-regulate their pesticide usage. The paper aims to identify the influence of an internal driving factor, i.e., perceived benefits, and an external driving factor, i.e., subjective norm, on farmers' safe pesticide behaviors, and whether the two factors are moderated by the exposure to information on government policies and the market, based on a sample of 971 farmers selected from 5 Chinese provinces. The results revealed that farmers' safe pesticide usage was predominately driven by perceived benefits whereas external pressure or subjective norm did not play much of a role. Interaction effects were found between the exposure to market information and perceived benefits, and also between subjective norm and exposure to government policy. Extensions agencies are recommended to effectively convey to farmers the benefits to follow safe pesticide practices. Meanwhile, surveillance and monitoring systems should be established so that the prices of their agricultural products are reflected by the quality of the products.

Safe procedure development to manage hazardous drugs in the workplace.

Science.gov (United States)

Gaspar Carreño, Marisa; Achau Muñoz, Rubén; Torrico Martín, Fátima; Agún Gonzalez, Juan José; Sanchez Santos, Jose Cristobal; Cercos Lletí, Ana Cristina; Ramos Orozco, Pedro

2017-03-01

To develop a safety working procedure for the employees in the Intermutual Hospital de Levante (HIL) in those areas of activity that deal with the handling of hazardous drugs (MP). The procedure was developed in six phases: 1) hazard definition; 2) definition and identification of processes and development of general correct work practices about hazardous drugs' selection and special handling; 3) detection, selection and set of specific recommendations to handle with hazardous drugs during the processes of preparation and administration included in the hospital GFT; 4) categorization of risk during the preparation/administration and development of an identification system; 5) information and training of professionals; 6) implementation of the identification measures and prevention guidelines. Six processes were detected handling HD. During those processes, thirty HD were identified included in the hospital GFT and a safer alternative was found for 6 of them. The HD were classified into 4 risk categories based on those measures to be taken during the preparation and administration of each of them. The development and implementation of specific safety-work processes dealing with medication handling, allows hospital managers to accomplish effectively with their legal obligations about the area of prevention and provides healthcare professional staff with the adequate techniques and safety equipment to avoid possible dangers and risks of some drugs. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Safety of Cargo Aircraft Handling Procedure

Directory of Open Access Journals (Sweden)

Daniel Hlavatý

2017-07-01

Full Text Available The aim of this paper is to get acquainted with the ways how to improve the safety management system during cargo aircraft handling. The first chapter is dedicated to general information about air cargo transportation. This includes the history or types of cargo aircraft handling, but also the means of handling. The second part is focused on detailed description of cargo aircraft handling, including a description of activities that are performed before and after handling. The following part of this paper covers a theoretical interpretation of safety, safety indicators and legislative provisions related to the safety of cargo aircraft handling. The fourth part of this paper analyzes the fault trees of events which might occur during handling. The factors found by this analysis are compared with safety reports of FedEx. Based on the comparison, there is a proposal on how to improve the safety management in this transportation company.

Implicit attitudes towards risky and safe driving in a Danish sample

DEFF Research Database (Denmark)

Martinussen, Laila Marianne

; further, self-reports of the intention to drive safely (or not) are socially sensitive. Therefore, we examined automatic preferences towards safe and risky driving with a Go/No-go Association Task (GNAT). The results suggest that (1) implicit attitudes towards driving behavior can be measured reliably...... with the GNAT; (2) implicit attitudes towards safe driving versus towards risky driving may be separable constructs. We propose that research on driving behavior may benefit from routinely including measures of implicit cognition. A practical advantage is a lesser susceptibility to social desirability biases......, compared to self-report methods. Pending replication in future research, the apparent dissociation between implicit attitudes towards safe versus risky driving that we observed may contribute to a greater theoretical understanding of the causes of unsafe and risky driving behavior....

Measurement of particulate concentrations produced during bulk material handling at the Tarragona harbor

Energy Technology Data Exchange (ETDEWEB)

Artinano, B.; Gomez-Moreno, F.J.; Pujadas, M.; Moreno, N.; Alastuey, A.; Querol, X.; Martin, F.; Guerra, A.; Luaces, J.A.; Basora, J. [CIEMAT, Madrid (Spain)

2007-09-15

Bulk material handling can be a significant source of particles in harbor areas. The atmospheric impact of a number of loading/unloading activities of diverse raw materials has been assessed from continuous measurements of ambient particle concentrations recorded close to the emission sources. Two experimental campaigns have been carried out in the Tarragona port to document the impact of specific handling operations and bulk materials. Dusty bulk materials such as silica-manganese powder, tapioca, coal, clinker and lucerne were dealt with during the experiments. The highest impacts on ambient particle concentrations were recorded during handling of clinker. For this material and silica-manganese powder, high concentrations were recorded in the fine grain size ({lt}2.5 {mu}m). The lowest impacts on particulate matter concentrations were recorded during handling of tapioca and lucerne, mainly in the coarse grain size (2-5-10 {mu} m). The effectiveness of several emission abatement measures, such as ground watering to diminish coal particle resuspension, was demonstrated to reduce ambient concentrations by up to two orders of magnitude. The importance of other good practices in specific handling operations, such as controlling the height of the shovel discharge, was also evidenced by these experiments. The results obtained can be further utilized as a useful experimental database for emission factor estimations.

Lessons from Semmelweis:A Social Epidemiologic Update On Safe Motherhood

Directory of Open Access Journals (Sweden)

Julie Cwikel

2008-01-01

Full Text Available In this historical review, Ignaz Semmelweis's study of handwashing to prevent puerperal fever is described and used as a benchmark from which to identify salient issues that are informative to today's women’s health activists working for Safe Motherhood. The epidemiology of contemporary excess maternal mortality is reviewed. Using the conceptual framework of social epidemiology, the paper addresses four issues that were problematic in Semmelweis’ era. New tools in public health are presented that can help to solve critical, still challenging problems to reduce excess maternal mortality, nosocomial infections, and puerperal fever at childbirth: 1 progress in behavioral methods to promote health behavior change, 2 the introduction of participatory action research, 3 the diffusion of evidence-based public health practice and 4 understanding how politics and health interact and present challenges when trying to meet public health goals. Social exclusion and marginality are still key issues in determining who has access to safe motherhood and who risks her life in maternity. Applied social epidemiology allows practitioners to make effective use of the already accumulated evidence and translate it into effective public health practice to promote safe motherhood around the world.

New, clean handling process introduced to improve cable quality

Energy Technology Data Exchange (ETDEWEB)

Hunt, C G

1990-05-01

The clean room system introduced by Canada Wire and Cable Limited in its Toronto plant for its cable manufacturing operation is described. While clean room technology is common in the food processing industry, optical and aerospace manufacturing processes, this is the first time it has been applied to wire and cable extrusion in North America. The purpose of the clean compound handling system is to prevent particle contamination in the shielding and cable insulation materials, as part of an effort to prevent premature underground electric cable failures. Two rooms are dedicated to handling different types of insulation compound, two are dedicated to receiving semi-conducting shielding material, and the fifth room functions as an air lock for the two insulation rooms. The atmosphere is highly regulated with programmable logic control. The air supply filters capture 99.97% of all particles 0.3 microns or larger. The system also maintains air temperature, relative humidity and static pressure. The life variability of cross-linked polyethylene primary distribution cable is dependant on five factors: material purity, extra clean compound handling, cable design, manufacturing process, and installation and operation practices. The clean room system is expected to result in cable that is more resistant to water treeing failures. 2 figs.

Simulator for candu600 fuel handling system. environmental implications

International Nuclear Information System (INIS)

Vulpe, S.; Valeca, S.; Predescu, D.

2016-01-01

Personnel training are a main topic in the security and reliability of several industrial processes. The simulator is a physical device that reproduces real operation of a device used in a production process technology. Typically, a simulator is intended to train the operators to work properly with the real device in the production process, but simulators can be involved frequently in the research and evaluation of performance of human operators. Process simulation has a significant role in the training of operators of nuclear plants. To ensure the safe operation, protection of workers and the environment, of any nuclear power plant, the training of its operators in all operating modes of the plant is essential. A trained operator who can handle any emergency in a controlled manner, without panic, protecting equipment and personnel is an asset for a nuclear power plant. (authors)

Mobile retroreflectivity best practices handbook.

Science.gov (United States)

2009-07-01

This handbook documents best practices related to proper use of the mobile retroreflectometer, sampling of : sites for data collection, and handling of mobile retroreflectivity data. The best practices described in this : handbook are derived from th...

Awareness, practice of safety measures and the handling of medical wastes at a tertiary hospital in Nigeria.