Evaluating different interrow distance between corn and soybean for optimum growth, production and nutritive value of intercropped forages.

Science.gov (United States)

Kim, Jeongtae; Song, Yowook; Kim, Dong Woo; Fiaz, Muhammad; Kwon, Chan Ho

2018-01-01

Maize fodder is being used as staple feed for livestock but it lacks protein and essential amino acids; lysine and tryptophan. Intercropping maize with leguminous soybean crop is promising technique under limited land resources of South Korea but it can only give considerable advantages when adequate distance is provided between corn and soybean rows. Main aim of present study was to find-out adequate distance between corn and soybean seeding rows for optimum growth, yield and nutritive value of intercropped forage. Different interrow distances between corn and soybean were evaluated under four treatments, viz. 1) Corn sole as positive control treatment 2) Zero cm between corn and soybean (control); 2) Five cm between corn and soybean; 3) 10 cm between corn and soybean, with three replicates under randomized block design. Findings depicted that height and number of corn stalks and ears were similar ( P  > 0.05) among different treatments. Numerically average corn ear height was decreased at zero cm distance. Dry matter percentage in all components; corn stalk, corn ear and soybean was also found not different ( P  > 0.05) but dry matter yield in component of corn ear was lower ( P  value, total digestible nutrient yield in intercropped corn was also found lower ( P  value of forage at wider interrow distance i.e. 5 cm between corn and soybean might be due to adequate interseed distance. Conclusively, pattern of corn and soybean seeding in rows at 5 cm distance was found suitable which provided adequate interrow distance to maintain enough mutual cooperation and decreased competition between both species for optimum production performance and nutritive value of intercropped forage.

Assessment of impact distances for particulate matter dispersion: A stochastic approach

Energy Technology Data Exchange (ETDEWEB)

Godoy, S.M.; Mores, P.L.; Santa Cruz, A.S.M. [CAIMI - Centro de Aplicaciones Informaticas y Modelado en Ingenieria, Universidad Tecnologica Nacional-Facultad Regional Rosario, Zeballos 1341-S2000 BQA Rosario, Santa Fe (Argentina); Scenna, N.J. [CAIMI - Centro de Aplicaciones Informaticas y Modelado en Ingenieria, Universidad Tecnologica Nacional-Facultad Regional Rosario, Zeballos 1341-S2000 BQA Rosario, Santa Fe (Argentina); INGAR - Instituto de Desarrollo y Diseno (Fundacion ARCIEN - CONICET), Avellaneda 3657, S3002 GJC Santa Fe (Argentina)], E-mail: nscenna@santafe-conicet.gov.ar

2009-10-15

It is known that pollutants can be dispersed from the emission sources by the wind, or settled on the ground. Particle size, stack height, topography and meteorological conditions strongly affect particulate matter (PM) dispersion. In this work, an impact distance calculation methodology considering different particulate sizes is presented. A Gaussian-type dispersion model for PM that handles size particles larger than 0.1 {mu}m is used. The model considers primary particles and continuous emissions. PM concentration distribution at every affected geographical point defined by a grid is computed. Stochastic uncertainty caused by the natural variability of atmospheric parameters is taken into consideration in the dispersion model by applying a Monte Carlo methodology. The prototype package (STRRAP) that takes into account the stochastic behaviour of atmospheric variables, developed for risk assessment and safe distances calculation [Godoy SM, Santa Cruz ASM, Scenna NJ. STRRAP SYSTEM - A software for hazardous materials risk assessment and safe distances calculation. Reliability Engineering and System Safety 2007;92(7):847-57] is enlarged for the analysis of the PM air dispersion. STRRAP computes distances from the source to every affected receptor in each trial and generates the impact distance distribution for each particulate size. In addition, a representative impact distance value to delimit the affected area can be obtained. Fuel oil stack effluents dispersion in Rosario city is simulated as a case study. Mass concentration distributions and impact distances are computed for the range of interest in environmental air quality evaluations (PM{sub 2.5}-PM{sub 10})

Assessment of impact distances for particulate matter dispersion: A stochastic approach

International Nuclear Information System (INIS)

Godoy, S.M.; Mores, P.L.; Santa Cruz, A.S.M.; Scenna, N.J.

2009-01-01

It is known that pollutants can be dispersed from the emission sources by the wind, or settled on the ground. Particle size, stack height, topography and meteorological conditions strongly affect particulate matter (PM) dispersion. In this work, an impact distance calculation methodology considering different particulate sizes is presented. A Gaussian-type dispersion model for PM that handles size particles larger than 0.1 μm is used. The model considers primary particles and continuous emissions. PM concentration distribution at every affected geographical point defined by a grid is computed. Stochastic uncertainty caused by the natural variability of atmospheric parameters is taken into consideration in the dispersion model by applying a Monte Carlo methodology. The prototype package (STRRAP) that takes into account the stochastic behaviour of atmospheric variables, developed for risk assessment and safe distances calculation [Godoy SM, Santa Cruz ASM, Scenna NJ. STRRAP SYSTEM - A software for hazardous materials risk assessment and safe distances calculation. Reliability Engineering and System Safety 2007;92(7):847-57] is enlarged for the analysis of the PM air dispersion. STRRAP computes distances from the source to every affected receptor in each trial and generates the impact distance distribution for each particulate size. In addition, a representative impact distance value to delimit the affected area can be obtained. Fuel oil stack effluents dispersion in Rosario city is simulated as a case study. Mass concentration distributions and impact distances are computed for the range of interest in environmental air quality evaluations (PM 2.5 -PM 10 ).

Towards Safe Robotic Surgical Systems

DEFF Research Database (Denmark)

Sloth, Christoffer; Wisniewski, Rafael

2015-01-01

a controller for motion compensation in beating-heart surgery, and prove that it is safe, i.e., the surgical tool is kept within an allowable distance and orientation of the heart. We solve the problem by simultaneously finding a control law and a barrier function. The motion compensation system is simulated...... from several initial conditions to demonstrate that the designed control system is safe for every admissible initial condition....

Monetizing French Distance Education: A Field Enquiry on Higher Education Value(s)

Science.gov (United States)

Olivier, Marty

2014-01-01

A field enquiry in French distance education allows us to analyze the evolution of a specific institution towards new public management: Parallel to a trend of free courseware and open education, there is a paradoxical reality of distance education monetization. Whereas history shows how traditional French education is a state controlled public…

When Do Distance Effects Become Empirically Observable? An Investigation in the Context of Headquarters Value Creation for Subsidiaries

NARCIS (Netherlands)

Beugelsdijk, Sjoerd; Nell, Phillip C.; Ambosd, Bjoern

Integrating distance research with the behavioral strategy literature on MNC headquarters-subsidiary relations, this paper explores how the distance between headquarters and subsidiaries relates to value added by the headquarters. We show for 124 manufacturing subsidiaries in Europe that, on

Thermodynamics of asymptotically safe theories

DEFF Research Database (Denmark)

Rischke, Dirk H.; Sannino, Francesco

2015-01-01

We investigate the thermodynamic properties of a novel class of gauge-Yukawa theories that have recently been shown to be completely asymptotically safe, because their short-distance behaviour is determined by the presence of an interacting fixed point. Not only do all the coupling constants freeze...

Be-safe travel, a web-based geographic application to explore safe-route in an area

Science.gov (United States)

Utamima, Amalia; Djunaidy, Arif

2017-08-01

In large cities in developing countries, the various forms of criminality are often found. For instance, the most prominent crimes in Surabaya, Indonesia is 3C, that is theft with violence (curas), theft by weighting (curat), and motor vehicle theft (curanmor). 3C case most often occurs on the highway and residential areas. Therefore, new entrants in an area should be aware of these kind of crimes. Route Planners System or route planning system such as Google Maps only consider the shortest distance in the calculation of the optimal route. The selection of the optimal path in this study not only consider the shortest distance, but also involves other factors, namely the security level. This research considers at the need for an application to recommend the safest road to be passed by the vehicle passengers while drive an area. This research propose Be-Safe Travel, a web-based application using Google API that can be accessed by people who like to drive in an area, but still lack of knowledge of the pathways which are safe from crime. Be-Safe Travel is not only useful for the new entrants, but also useful for delivery courier of valuables goods to go through the safest streets.

Is 2 mm a safe distance from the inferior alveolar canal to avoid ...

African Journals Online (AJOL)

. Conclusion: When 2 mm is considered as a safety distance, the distance of the implants to the IAC did not yield any statistical difference regarding postoperative neurosensory complications. Keywords: Dental implants, inferior alveolar nerve ...

New method for distance-based close following safety indicator.

Science.gov (United States)

Sharizli, A A; Rahizar, R; Karim, M R; Saifizul, A A

2015-01-01

The increase in the number of fatalities caused by road accidents involving heavy vehicles every year has raised the level of concern and awareness on road safety in developing countries like Malaysia. Changes in the vehicle dynamic characteristics such as gross vehicle weight, travel speed, and vehicle classification will affect a heavy vehicle's braking performance and its ability to stop safely in emergency situations. As such, the aim of this study is to establish a more realistic new distance-based safety indicator called the minimum safe distance gap (MSDG), which incorporates vehicle classification (VC), speed, and gross vehicle weight (GVW). Commercial multibody dynamics simulation software was used to generate braking distance data for various heavy vehicle classes under various loads and speeds. By applying nonlinear regression analysis to the simulation results, a mathematical expression of MSDG has been established. The results show that MSDG is dynamically changed according to GVW, VC, and speed. It is envisaged that this new distance-based safety indicator would provide a more realistic depiction of the real traffic situation for safety analysis.

Safety distance between underground natural gas and water pipeline facilities

International Nuclear Information System (INIS)

Mohsin, R.; Majid, Z.A.; Yusof, M.Z.

2014-01-01

A leaking water pipe bursting high pressure water jet in the soil will create slurry erosion which will eventually erode the adjacent natural gas pipe, thus causing its failure. The standard 300 mm safety distance used to place natural gas pipe away from water pipeline facilities needs to be reviewed to consider accidental damage and provide safety cushion to the natural gas pipe. This paper presents a study on underground natural gas pipeline safety distance via experimental and numerical approaches. The pressure–distance characteristic curve obtained from this experimental study showed that the pressure was inversely proportional to the square of the separation distance. Experimental testing using water-to-water pipeline system environment was used to represent the worst case environment, and could be used as a guide to estimate appropriate safety distance. Dynamic pressures obtained from the experimental measurement and simulation prediction mutually agreed along the high-pressure water jetting path. From the experimental and simulation exercises, zero effect distance for water-to-water medium was obtained at an estimated horizontal distance at a minimum of 1500 mm, while for the water-to-sand medium, the distance was estimated at a minimum of 1200 mm. - Highlights: • Safe separation distance of underground natural gas pipes was determined. • Pressure curve is inversely proportional to separation distance. • Water-to-water system represents the worst case environment. • Measured dynamic pressures mutually agreed with simulation results. • Safe separation distance of more than 1200 mm should be applied

Asymptotically Safe Dark Matter

DEFF Research Database (Denmark)

Sannino, Francesco; Shoemaker, Ian M.

2015-01-01

We introduce a new paradigm for dark matter (DM) interactions in which the interaction strength is asymptotically safe. In models of this type, the coupling strength is small at low energies but increases at higher energies, and asymptotically approaches a finite constant value. The resulting...... searches are the primary ways to constrain or discover asymptotically safe dark matter....

On the dependency of the decay of ground motion peak values with distance for small and large earthquakes

Science.gov (United States)

Dujardin, Alain; Courboulex, Françoise; Causse, Matthieu; Traversa, Paola; Monfret, Tony

2013-04-01

Ground motion decay with distance presents a clear magnitude dependence, PGA values of small events decreasing faster than those of larger events. This observation is now widely accepted and often taken into account in recent ground motion prediction equations (Anderson 2005, Akkar & Bommer 2010). The aim of this study is to investigate the origin of this dependence, which has not been clearly identified yet. Two main hypotheses are considered. On one hand the difference of ground motion decay is related to an attenuation effect, on the other hand the difference is related to an effect of extended fault (Anderson 2000). To study the role of attenuation, we realized synthetic tests using the stochastic simulation program SMSIM from Boore (2005). We build a set of simulations from several magnitudes and epicentral distances, and observe that the decay in PGA values is strongly dependent on the spectral shape of the Fourier spectra, which in turn strongly depends on the attenuation factor (Q(f) or kappa). We found that, for a point source approximation and an infinite value of Q (no attenuation) there is no difference between small and large events and that this difference increases when Q decreases. Theses results show that the influence of attenuation on spectral shape is different for earthquakes of different magnitude. In fact the influence of attenuation, which is more important at higher frequency, is larger for small earthquakes, whose Fourier acceleration spectrum has predominantly higher frequencies. We then study the effect of extended source using complete waveform simulations in a 1D model. We find that when the duration of the source time function increases, there is a larger probability to obtain large PGA values at equivalent distances. This effect could also play an important role in the PGA decay with magnitude and distance. Finally we compare these results with real datasets from the Japanese accelerometric network KIK-net.

Safety distances for hydrogen filling stations

NARCIS (Netherlands)

Matthijsen, A J C M; Kooi, E S

2006-01-01

In the context of spatial planning the Dutch Ministry of Housing, Spatial Planning and the Environment asked the Centre for External Safety of the National Institute for Public Health and the Environment (RIVM) to advice on safe distances pertaining to hydrogen filling stations. The RIVM made use of

A comprehensive methodology for the analysis of highway sight distance

OpenAIRE

Castro Malpica, María; Santos Berbel, César de; Iglesias Martínez, Luis

2017-01-01

As one of the main elements of geometric design, sight distance must be considered carefully for the safe and efficient operation of highways. An application developed on geographic information systems (GIS) was con-ceived for the three-dimensional estimation of sight distance on highways, as opposed to conventional two-dimensional techniques, which may underestimate or overestimate the actual visibility conditions. It is capable of computing the available sight distance of a highway section ...

Hierarchical traits distances explain grassland Fabaceae species' ecological niches distances

Science.gov (United States)

Fort, Florian; Jouany, Claire; Cruz, Pablo

2015-01-01

Fabaceae species play a key role in ecosystem functioning through their capacity to fix atmospheric nitrogen via their symbiosis with Rhizobium bacteria. To increase benefits of using Fabaceae in agricultural systems, it is necessary to find ways to evaluate species or genotypes having potential adaptations to sub-optimal growth conditions. We evaluated the relevance of phylogenetic distance, absolute trait distance and hierarchical trait distance for comparing the adaptation of 13 grassland Fabaceae species to different habitats, i.e., ecological niches. We measured a wide range of functional traits (root traits, leaf traits, and whole plant traits) in these species. Species phylogenetic and ecological distances were assessed from a species-level phylogenetic tree and species' ecological indicator values, respectively. We demonstrated that differences in ecological niches between grassland Fabaceae species were related more to their hierarchical trait distances than to their phylogenetic distances. We showed that grassland Fabaceae functional traits tend to converge among species with the same ecological requirements. Species with acquisitive root strategies (thin roots, shallow root systems) are competitive species adapted to non-stressful meadows, while conservative ones (coarse roots, deep root systems) are able to tolerate stressful continental climates. In contrast, acquisitive species appeared to be able to tolerate low soil-P availability, while conservative ones need high P availability. Finally we highlight that traits converge along the ecological gradient, providing the assumption that species with similar root-trait values are better able to coexist, regardless of their phylogenetic distance. PMID:25741353

Hierarchical traits distances explain grassland Fabaceae species’ ecological niches distances

Directory of Open Access Journals (Sweden)

Florian eFort

2015-02-01

Full Text Available Fabaceae species play a key role in ecosystem functioning through their capacity to fix atmospheric nitrogen via their symbiosis with Rhizobium bacteria. To increase benefits of using Fabaceae in agricultural systems, it is necessary to find ways to evaluate species or genotypes having potential adaptations to sub-optimal growth conditions. We evaluated the relevance of phylogenetic distance, absolute trait distance and hierarchical trait distance for comparing the adaptation of 13 grassland Fabaceae species to different habitats, i.e. ecological niches. We measured a wide range of functional traits (root traits, leaf traits and whole plant traits in these species. Species phylogenetic and ecological distances were assessed from a species-level phylogenetic tree and species’ ecological indicator values, respectively. We demonstrated that differences in ecological niches between grassland Fabaceae species were related more to their hierarchical trait distances than to their phylogenetic distances. We showed that grassland Fabaceae functional traits tend to converge among species with the same ecological requirements. Species with acquisitive root strategies (thin roots, shallow root systems are competitive species adapted to non-stressful meadows, while conservative ones (coarse roots, deep root systems are able to tolerate stressful continental climates. In contrast, acquisitive species appeared to be able to tolerate low soil-P availability, while conservative ones need high P availability. Finally we highlight that traits converge along the ecological gradient, providing the assumption that species with similar root-trait values are better able to coexist, regardless of their phylogenetic distance.

Reliability of reference distances used in photogrammetry.

Science.gov (United States)

Aksu, Muge; Kaya, Demet; Kocadereli, Ilken

2010-07-01

To determine the reliability of the reference distances used for photogrammetric assessment. The sample consisted of 100 subjects with mean ages of 22.97 +/- 2.98 years. Five lateral and four frontal parameters were measured directly on the subjects' faces. For photogrammetric assessment, two reference distances for the profile view and three reference distances for the frontal view were established. Standardized photographs were taken and all the parameters that had been measured directly on the face were measured on the photographs. The reliability of the reference distances was checked by comparing direct and indirect values of the parameters obtained from the subjects' faces and photographs. Repeated measure analysis of variance (ANOVA) and Bland-Altman analyses were used for statistical assessment. For profile measurements, the indirect values measured were statistically different from the direct values except for Sn-Sto in male subjects and Prn-Sn and Sn-Sto in female subjects. The indirect values of Prn-Sn and Sn-Sto were reliable in both sexes. The poorest results were obtained in the indirect values of the N-Sn parameter for female subjects and the Sn-Me parameter for male subjects according to the Sa-Sba reference distance. For frontal measurements, the indirect values were statistically different from the direct values in both sexes except for one in male subjects. The indirect values measured were not statistically different from the direct values for Go-Go. The indirect values of Ch-Ch were reliable in male subjects. The poorest results were obtained according to the P-P reference distance. For profile assessment, the T-Ex reference distance was reliable for Prn-Sn and Sn-Sto in both sexes. For frontal assessment, Ex-Ex and En-En reference distances were reliable for Ch-Ch in male subjects.

Fast Computing for Distance Covariance

OpenAIRE

Huo, Xiaoming; Szekely, Gabor J.

2014-01-01

Distance covariance and distance correlation have been widely adopted in measuring dependence of a pair of random variables or random vectors. If the computation of distance covariance and distance correlation is implemented directly accordingly to its definition then its computational complexity is O($n^2$) which is a disadvantage compared to other faster methods. In this paper we show that the computation of distance covariance and distance correlation of real valued random variables can be...

Laser distance measurement using a newly developed composite-type optical fiberscope for fetoscopic laser surgery

Science.gov (United States)

Seki, Takeshi; Oka, Kiyoshi; Naganawa, Akihiro; Yamashita, Hiromasa; Kim, Keri; Chiba, Toshio

2010-10-01

Twin-twin transfusion syndrome (TTTS) is a condition of twins disproportionately sharing blood by the communicating vessels in the shared placenta and resulting in the significantly high fetal and perinatal mortality rate. Fetoscopic laser surgery is performed to block these communicating vessels. It is difficult, however, to perceive the distance from the tip of the fetoscope to the placental surface with only a two-dimensional fetoscopic view. When the distance is too short it causes excessive irradiation and even the risk of inadvertent damage to the placenta. On the other hand, not only target vessels but also adjacent tissues can be irradiated when it is too long. We have developed a composite-type optical fiberscope (COF) that was able to observe the target area and also to perform laser irradiation at the same time. In this paper, we studied a method to estimate the distance from the tip of the COF to the target area. We combined the COF with a laser blood-flow meter. Using laser light from the meter, we measured the total amount of light received ("REFLEX") and estimated the relation between the "REFLEX" value and the laser irradiation distance. Further in vivo experiments were subsequently carried out using porcine mesenteric blood vessels. The results showed that the distance and the "REFLEX" value were inversely proportional, irrespective of the experimental environment (e.g. in air, water and amniotic fluid-like solution) and the target object. In the in vivo experiments, we quantitatively measured the distance within an accuracy of ±1 mm (approximately 10%). In conclusion, our new system was able to measure the distance in vivo enabling a surgeon to safely and effectively perform laser irradiation at a suitable distance. The system can be used not only for fetoscopic surgery but also for general endoscopic surgery.

Distance and Face-to-Face Learning Culture and Values: A Conceptual Analysis

Science.gov (United States)

Tejeda-Delgado, Carmen; Millan, Brett J.; Slate, John R.

2011-01-01

With distance learning increasing in popularity across the country and the world, a review of the extant literature as it relates to distance learning and face-to-face learning is warranted. In particular, this paper examined distance learning, including a historical overview, prevailing themes in past research, and studies relating the importance…

Distance Running and the Elementary-Age Child

Science.gov (United States)

Jenny, Seth; Armstrong, Tess

2013-01-01

Distance running is often underutilized in elementary physical education due to three common misconceptions about using this activity with young children: (1) it is not enjoyable, (2) it is not safe, and (3) children will get mentally "burned out." Through reviewing the literature and offering guidelines, practical tips, instant…

Efficient Underwater RSS Value to Distance Inversion Using the Lambert Function

Directory of Open Access Journals (Sweden)

Majid Hosseini

2014-01-01

Full Text Available There are many applications for using wireless sensor networks (WSN in ocean science; however, identifying the exact location of a sensor by itself (localization is still a challenging problem, where global positioning system (GPS devices are not applicable underwater. Precise distance measurement between two sensors is a tool of localization and received signal strength (RSS, reflecting transmission loss (TL phenomena, is widely used in terrestrial WSNs for that matter. Underwater acoustic sensor networks have not been used (UASN, due to the complexity of the TL function. In this paper, we addressed these problems by expressing underwater TL via the Lambert W function, for accurate distance inversion by the Halley method, and compared this to Newton-Raphson inversion. Mathematical proof, MATLAB simulation, and real device implementation demonstrate the accuracy and efficiency of the proposed equation in distance calculation, with fewer iterations, computation stability for short and long distances, and remarkably short processing time. Then, the sensitivities of Lambert W function and Newton-Raphson inversion to alteration in TL were examined. The simulation results showed that Lambert W function is more stable to errors than Newton-Raphson inversion. Finally, with a likelihood method, it was shown that RSS is a practical tool for distance measurement in UASN.

The baseline serum value of α-amylase is a significant predictor of distance running performance.

Science.gov (United States)

Lippi, Giuseppe; Salvagno, Gian Luca; Danese, Elisa; Tarperi, Cantor; La Torre, Antonio; Guidi, Gian Cesare; Schena, Federico

2015-02-01

This study was planned to investigate whether serum α-amylase concentration may be associated with running performance, physiological characteristics and other clinical chemistry analytes in a large sample of recreational athletes undergoing distance running. Forty-three amateur runners successfully concluded a 21.1 km half-marathon at 75%-85% of their maximal oxygen uptake (VO2max). Blood was drawn during warm up and 15 min after conclusion of the run. After correction for body weight change, significant post-run increases were observed for serum values of alkaline phosphatase, alanine aminotransferase, aspartate aminotransferase, bilirubin, creatine kinase (CK), iron, lactate dehydrogenase (LDH), triglycerides, urea and uric acid, whereas the values of body weight, glomerular filtration rate, total and low density lipoprotein-cholesterol were significantly decreased. The concentration of serum α-amylase was unchanged. In univariate analysis, significant associations with running performance were found for gender, VO2max, training regimen and pre-run serum values of α-amylase, CK, glucose, high density lipoprotein-cholesterol, LDH, urea and uric acid. In multivariate analysis, only VO2max (p=0.042) and baseline α-amylase (p=0.021) remained significant predictors of running performance. The combination of these two variables predicted 71% of variance in running performance. The baseline concentration of serum α-amylase was positively correlated with variation of serum glucose during the trial (r=0.345; p=0.025) and negatively with capillary blood lactate at the end of the run (r=-0.352; p=0.021). We showed that the baseline serum α-amylase concentration significantly and independently predicts distance running performance in recreational runners.

On the tenth value distance of the photon field along the maze of high-energy linear accelerator vaults.

Science.gov (United States)

Han, Zhaohui; Chin, Lee M

2018-03-01

There is a wide range in the reported photon tenth value distance (TVD) in the maze of high-energy linear accelerator vaults. In order to gain insight into the appropriate use of the TVD value during door design, we performed measurements of the photon dose in the maze of four vaults. In addition, our study represents the first to describe a scenario where an inner borated polyethylene (BPE) door for neutron shielding is installed in the maze downstream to Point A, the point on the maze centerline that is just visible from the isocenter. The measurements were made along the maze centerline at 1 m above the floor. In all cases, the accelerator operated at a nominal energy of 15 MV. Of the four vaults, three were equipped with an inner BPE door at a distance of 1.0-2.1 m downstream to Point A. The door was made of 10.16 cm (4″) BPE sandwiched between two 0.635 cm (1/4″) steel face plates. The photon dose in the maze without a BPE door decreases exponentially with a characteristic TVD of 6 m beyond a distance of 2.5 m from Point A. The presence of a BPE door in an identical vault not only reduces the photon intensity in the maze by about an order of magnitude, but also softens the energy spectrum with a shortened TVD of 4.7 m, significantly lessening the shielding burden at the outer maze entrance. In contrast to the common use of Point A as the reference point to specify distance, the photon dose in the maze with a BPE door located downstream to Point A can be satisfactorily described as exponential functions of the distance measured from the door, which shows good consistency among the three vaults of different room parameters. © 2018 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Core Values | NREL

Science.gov (United States)

Core Values Core Values NREL's core values are rooted in a safe and supportive work environment guide our everyday actions and efforts: Safe and supportive work environment Respect for the rights physical and social environment Integrity Maintain the highest standard of ethics, honesty, and integrity

Work values and career anchors: the perspective of students of higher education in classroom methods and distance

Directory of Open Access Journals (Sweden)

Tais de Andrade

2018-01-01

Full Text Available This study takes into account the factors that interfere with career decisions from the internal demands of individuals, represented by the work values. Investigated university students’ perspective on work values and career anchors. For this, we used a survey along the 958 undergraduate students of face and distance higher education institutions in the interior of Rio Grande do Sul. The data collection instrument was developed from the Work Values Scale Revised developed by Porto and Pilati (2010 and the Inventory of Career Anchors proposed by Schein (1993; 1996. As for the results, there were significant differences between the perceptions of the two methods of teaching, but the hierarchy assigned to the values and anchors in both was similar, which shows certain pattern of agreement as to the perception of importance attached to each dimension studied.

Evaluation of land-use and transport network effects on cyclists' route choices in the Copenhagen Region in value-of-distance space

DEFF Research Database (Denmark)

Prato, Carlo Giacomo; Halldórsdóttir, Katrín; Nielsen, Otto Anker

2018-01-01

the cycling environment, (iii) estimating the model in value-of-distance rather than preference space, and (iv) not focusing only on preferences for traditional variables (e.g., distance, turns, hilliness, intersections, motorized road characteristics), but also on perceptions and preferences for bicycle...... and bridges, and cycling alongside residential and scenic areas; (ii) cyclists dislike cycling on unpaved and hilly surfaces and alongside larger roads; (iii) cyclists have clear perceptions about different types of bicycle facilities, with a preference for bicycle lanes and segregated paths; (iv) cyclists...

Nuclide documentation. Element specific parameter values used in the biospheric models of the safety assessments SR 97 and SAFE

International Nuclear Information System (INIS)

Karlsson, Sara; Bergstroem, Ulla

2002-05-01

In this report the element and nuclide specific parameter values used in the biospheric models of the safety assessments SR 97 and SAFE are presented. The references used are presented and where necessary the process of estimation of data is described. The parameters treated in this report are distribution coefficients in soil, organic soil and suspended matter in freshwater and brackish water, root uptake factors for pasturage, cereals, root crops and vegetables, bioaccumulation factors for freshwater fish, brackish water fish, freshwater invertebrates and marine water plants, transfer coefficients for transfer to milk and meat, translocation factors and dose coefficients for external exposure, ingestion (age-dependent values) and inhalation (age-dependent values). The radionuclides treated are those which could be of interest in the two safety assessments. Physical data such as half-lives and type of decay are also presented

Nuclide documentation. Element specific parameter values used in the biospheric models of the safety assessments SR 97 and SAFE

Energy Technology Data Exchange (ETDEWEB)

Karlsson, Sara; Bergstroem, Ulla [Studsvik Eco and Safety AB, Nykoeping (Sweden)

2002-05-01

In this report the element and nuclide specific parameter values used in the biospheric models of the safety assessments SR 97 and SAFE are presented. The references used are presented and where necessary the process of estimation of data is described. The parameters treated in this report are distribution coefficients in soil, organic soil and suspended matter in freshwater and brackish water, root uptake factors for pasturage, cereals, root crops and vegetables, bioaccumulation factors for freshwater fish, brackish water fish, freshwater invertebrates and marine water plants, transfer coefficients for transfer to milk and meat, translocation factors and dose coefficients for external exposure, ingestion (age-dependent values) and inhalation (age-dependent values). The radionuclides treated are those which could be of interest in the two safety assessments. Physical data such as half-lives and type of decay are also presented.

Extremal values on Zagreb indices of trees with given distance k-domination number.

Science.gov (United States)

Pei, Lidan; Pan, Xiangfeng

2018-01-01

Let [Formula: see text] be a graph. A set [Formula: see text] is a distance k -dominating set of G if for every vertex [Formula: see text], [Formula: see text] for some vertex [Formula: see text], where k is a positive integer. The distance k -domination number [Formula: see text] of G is the minimum cardinality among all distance k -dominating sets of G . The first Zagreb index of G is defined as [Formula: see text] and the second Zagreb index of G is [Formula: see text]. In this paper, we obtain the upper bounds for the Zagreb indices of n -vertex trees with given distance k -domination number and characterize the extremal trees, which generalize the results of Borovićanin and Furtula (Appl. Math. Comput. 276:208-218, 2016). What is worth mentioning, for an n -vertex tree T , is that a sharp upper bound on the distance k -domination number [Formula: see text] is determined.

New Maximal Two-distance Sets

DEFF Research Database (Denmark)

Lisonek, Petr

1996-01-01

A two-distance set in E^d is a point set X inthe d-dimensional Euclidean spacesuch that the distances between distinct points in Xassume only two different non-zero values. Based on results from classical distance geometry, we developan algorithm to classify, for a given dimension, all maximal...... (largest possible)two-distance sets in E^d.Using this algorithm we have completed the full classificationfor all dimensions less than or equal to 7, andwe have found one set in E^8 whosemaximality follows from Blokhuis' upper bound on sizes of s-distance sets.While in the dimensions less than or equal to 6...

Edit Distance to Monotonicity in Sliding Windows

DEFF Research Database (Denmark)

Chan, Ho-Leung; Lam, Tak-Wah; Lee, Lap Kei

2011-01-01

Given a stream of items each associated with a numerical value, its edit distance to monotonicity is the minimum number of items to remove so that the remaining items are non-decreasing with respect to the numerical value. The space complexity of estimating the edit distance to monotonicity of a ...

Metrics for measuring distances in configuration spaces

International Nuclear Information System (INIS)

Sadeghi, Ali; Ghasemi, S. Alireza; Schaefer, Bastian; Mohr, Stephan; Goedecker, Stefan; Lill, Markus A.

2013-01-01

In order to characterize molecular structures we introduce configurational fingerprint vectors which are counterparts of quantities used experimentally to identify structures. The Euclidean distance between the configurational fingerprint vectors satisfies the properties of a metric and can therefore safely be used to measure dissimilarities between configurations in the high dimensional configuration space. In particular we show that these metrics are a perfect and computationally cheap replacement for the root-mean-square distance (RMSD) when one has to decide whether two noise contaminated configurations are identical or not. We introduce a Monte Carlo approach to obtain the global minimum of the RMSD between configurations, which is obtained from a global minimization over all translations, rotations, and permutations of atomic indices

An effective and safe gastric endoscopic submucosal dissection in the right lateral position using an inverted overtube.

Science.gov (United States)

Mori, Hirohito; Rafiq, Kazi; Kobara, Hideki; Nishiyama, Noriko; Fujihara, Shintaro; Yachida, Tatsuo; Ayagi, Maki; Tani, Joji; Miyoshi, Hisaaki; Masaki, Tsutomu

2014-02-14

Previously, we reported the efficacy of a newly developed inverted overtube in shortening the hemostatic time and obtaining a clear endoscopic view in emergency endoscopic hemostasis. This device also helped us to perform gastric endoscopic submucosal dissection (ESD) more safely by changing the direction of gravity in the right lateral position. To perform a safe ESD, it is important to make an appropriate angle and distance between the electric knife and the gastric mucosa. In this position, the distance to gastric mucosa is reduced, and the angle of the electric knife changes from vertical to somewhat oblique, facilitating safer cutting.

VegeSafe: A community science program measuring soil-metal contamination, evaluating risk and providing advice for safe gardening.

Science.gov (United States)

Rouillon, Marek; Harvey, Paul J; Kristensen, Louise J; George, Steven G; Taylor, Mark P

2017-03-01

The extent of metal contamination in Sydney residential garden soils was evaluated using data collected during a three-year Macquarie University community science program called VegeSafe. Despite knowledge of industrial and urban contamination amongst scientists, the general public remains under-informed about the potential risks of exposure from legacy contaminants in their home garden environment. The community was offered free soil metal screening, allowing access to soil samples for research purposes. Participants followed specific soil sampling instructions and posted samples to the University for analysis with a field portable X-ray Fluorescence (pXRF) spectrometer. Over the three-year study period, >5200 soil samples, primarily from vegetable gardens, were collected from >1200 Australian homes. As anticipated, the primary soil metal of concern was lead; mean concentrations were 413 mg/kg (front yard), 707 mg/kg (drip line), 226 mg/kg (back yard) and 301 mg/kg (vegetable garden). The Australian soil lead guideline of 300 mg/kg for residential gardens was exceeded at 40% of Sydney homes, while concentrations >1000 mg/kg were identified at 15% of homes. The incidence of highest soil lead contamination was greatest in the inner city area with concentrations declining towards background values of 20-30 mg/kg at 30-40 km distance from the city. Community engagement with VegeSafe participants has resulted in useful outcomes: dissemination of knowledge related to contamination legacies and health risks; owners building raised beds containing uncontaminated soil and in numerous cases, owners replacing all of their contaminated soil. Copyright © 2016 Elsevier Ltd. All rights reserved.

Teaching Chemistry via Distance Education

Science.gov (United States)

Boschmann, Erwin

2003-06-01

This paper describes a chemistry course taught at Indiana University Purdue University, Indianapolis via television, with a Web version added later. The television format is a delivery technology; the Web is an engagement technology and is preferred since it requires student participation. The distance-laboratory component presented the greatest challenge since laboratories via distance education are not a part of the U.S. academic culture. Appropriate experiments have been developed with the consultation of experts from The Open University in the United Kingdom, Athabasca University in Canada, and Monash University in Australia. The criteria used in the development of experiments are: (1) they must be credible academic experiences equal to or better than those used on campus, (2) they must be easy to perform without supervision, (3) they must be safe, and (4) they must meet all legal requirements. An evaluation of the program using three different approaches is described. The paper concludes that technology-mediated distance education students do as well as on-campus students, but drop out at a higher rate. It is very important to communicate with students frequently, and technology tools ought to be used only if good pedagogy is enhanced by their use.

Representing distance, consuming distance

DEFF Research Database (Denmark)

Larsen, Gunvor Riber

Title: Representing Distance, Consuming Distance Abstract: Distance is a condition for corporeal and virtual mobilities, for desired and actual travel, but yet it has received relatively little attention as a theoretical entity in its own right. Understandings of and assumptions about distance...... are being consumed in the contemporary society, in the same way as places, media, cultures and status are being consumed (Urry 1995, Featherstone 2007). An exploration of distance and its representations through contemporary consumption theory could expose what role distance plays in forming...

Safe sex

Science.gov (United States)

... sex; Sexually transmitted - safe sex; GC - safe sex; Gonorrhea - safe sex; Herpes - safe sex; HIV - safe sex; ... contact. STIs include: Chlamydia Genital herpes Genital warts Gonorrhea Hepatitis HIV HPV Syphilis STIs are also called ...

Safe Laser Beam Propagation for Interplanetary Links

Science.gov (United States)

Wilson, Keith E.

2011-01-01

Ground-to-space laser uplinks to Earth–orbiting satellites and deep space probes serve both as a beacon and an uplink command channel for deep space probes and Earth-orbiting satellites. An acquisition and tracking point design to support a high bandwidth downlink from a 20-cm optical terminal on an orbiting Mars spacecraft typically calls for 2.5 kW of 1030-nm uplink optical power in 40 micro-radians divergent beams.2 The NOHD (nominal ocular hazard distance) of the 1030nm uplink is in excess of 2E5 km, approximately half the distance to the moon. Recognizing the possible threat of high power laser uplinks to the flying public and to sensitive Earth-orbiting satellites, JPL developed a three-tiered system at its Optical Communications Telescope Laboratory (OCTL) to ensure safe laser beam propagation through navigational and near-Earth space.

Ground-based remote sensing of volcanic CO2 and correlated SO2, HF, HCl, and BrO, in safe-distance from the crater

Science.gov (United States)

Butz, Andre; Solvejg Dinger, Anna; Bobrowski, Nicole; Kostinek, Julian; Fieber, Lukas; Fischerkeller, Constanze; Giuffrida, Giovanni Bruno; Hase, Frank; Klappenbach, Friedrich; Kuhn, Jonas; Lübcke, Peter; Tirpitz, Lukas; Tu, Qiansi

2017-04-01

Remote sensing of CO2 enhancements in volcanic plumes can be a tool to estimate volcanic CO2 emissions and thereby, to gain insight into the geological carbon cycle and into volcano interior processes. However, remote sensing of the volcanic CO2 is challenged by the large atmospheric background concentrations masking the minute volcanic signal. Here, we report on a demonstrator study conducted in September 2015 at Mt. Etna on Sicily, where we deployed an EM27/SUN Fourier Transform Spectrometer together with a UV spectrometer on a mobile remote sensing platform. The spectrometers were operated in direct-sun viewing geometry collecting cross-sectional scans of solar absorption spectra through the volcanic plume by operating the platform in stop-and-go patterns in 5 to 10 kilometers distance from the crater region. We successfully detected correlated intra-plume enhancements of CO2 and volcanic SO2, HF, HCl, and BrO. The path-integrated volcanic CO2 enhancements amounted to about 0.5 ppm (on top of the ˜400 ppm background). Key to successful detection of volcanic CO2 was A) the simultaneous observation of the O2 total column which allowed for correcting changes in the CO2 column caused by changes in observer altitude and B) the simultaneous measurement of volcanic species co-emitted with CO2 which allowed for discriminating intra-plume and extra-plume observations. The latter were used for subtracting the atmospheric CO2 background. The field study suggests that our remote sensing observatory is a candidate technique for volcano monitoring in safe distance from the crater region.

Robustness of Distance-to-Default

DEFF Research Database (Denmark)

Jessen, Cathrine; Lando, David

2013-01-01

Distance-to-default is a remarkably robust measure for ranking firms according to their risk of default. The ranking seems to work despite the fact that the Merton model from which the measure is derived produces default probabilities that are far too small when applied to real data. We use...... simulations to investigate the robustness of the distance-to-default measure to different model specifications. Overall we find distance-to-default to be robust to a number of deviations from the simple Merton model that involve different asset value dynamics and different default triggering mechanisms....... A notable exception is a model with stochastic volatility of assets. In this case both the ranking of firms and the estimated default probabilities using distance-to-default perform significantly worse. We therefore propose a volatility adjustment of the distance-to-default measure, that significantly...

Giant HII regions as distance indicators

International Nuclear Information System (INIS)

Melnick, Jorge; Terlevich, Robert; Moles, Mariano

1987-01-01

The correlations between the integrated Hβ luminosities, the velocity widths of the nebular lines and the metallicities of giant HII regions and HII galaxies are demonstrated to provide powerful distance indicators. They are calibrated on a homogeneous sample of giant HII regions with well determined distances and applied to distant HII galaxies to obtain a value of H 0 =95+-10 for the Hubble parameter, consistent with the value obtained by the Tully-Fisher technique. The effect of Malmquist bias and other systematic effects on the HII region method are discussed in detail. (Author)

When Do Distance Effects Become Empirically Observable?

DEFF Research Database (Denmark)

Beugelsdijk, Sjoerd; Nell, Phillip C.; Ambos, Björn

2017-01-01

Integrating distance research with the behavioral strategy literature on MNC headquarters-subsidiary relations, this paper explores how the distance between headquarters and subsidiaries relates to value added by the headquarters. We show for 124 manufacturing subsidiaries in Europe that...

Taï chimpanzees anticipate revisiting high-valued fruit trees from further distances.

Science.gov (United States)

Ban, Simone D; Boesch, Christophe; Janmaat, Karline R L

2014-11-01

The use of spatio-temporal memory has been argued to increase food-finding efficiency in rainforest primates. However, the exact content of this memory is poorly known to date. This study investigated what specific information from previous feeding visits chimpanzees (Pan troglodytes verus), in Taï National Park, Côte d'Ivoire, take into account when they revisit the same feeding trees. By following five adult females for many consecutive days, we tested from what distance the females directed their travels towards previously visited feeding trees and how previous feeding experiences and fruit tree properties influenced this distance. To exclude the influence of sensory cues, the females' approach distance was measured from their last significant change in travel direction until the moment they entered the tree's maximum detection field. We found that chimpanzees travelled longer distances to trees at which they had previously made food grunts and had rejected fewer fruits compared to other trees. In addition, the results suggest that the chimpanzees were able to anticipate the amount of fruit that they would find in the trees. Overall, our findings are consistent with the hypothesis that chimpanzees act upon a retrieved memory of their last feeding experiences long before they revisit feeding trees, which would indicate a daily use of long-term prospective memory. Further, the results are consistent with the possibility that positive emotional experiences help to trigger prospective memory retrieval in forest areas that are further away and have fewer cues associated with revisited feeding trees.

Association between cultural distance and migrant self-rated health

OpenAIRE

Detollenaere, Jens; Baert, Stijn; Willems, Sara

2018-01-01

Abstract: We study whether migrant health in Europe is associated with the cultural distance between their host country and country of origin. To this end, we run multilevel regression models on data merging self-rated health and social background of ae3800 migrants from the European Social Survey with an index of cultural distance based on country differences in values, norms and attitudes measured in the World Values Survey. We find that higher levels of cultural distance are associated wit...

Distance weighting for improved tomographic reconstructions

International Nuclear Information System (INIS)

Koeppe, R.A.; Holden, J.E.

1984-01-01

An improved method for the reconstruction of emission computed axial tomography images has been developed. The method is a modification of filtered back-projection, where the back projected values are weighted to reflect the loss of formation, with distance from the camera, which is inherent in gamma camera imaging. This information loss is a result of: loss of spatial resolution with distance, attenuation, and scatter. The weighting scheme can best be described by considering the contributions of any two opposing views to the reconstruction image pixels. The weight applied to the projections of one view is set to equal the relative amount of the original activity that was initially received in that projection, assuming a uniform attenuating medium. This yields a weighting value which is a function of distance into the image with a value of one for pixels ''near the camera'', a value of .5 at the image center, and a value of zero on the opposite side. Tomographic reconstructions produced with this method show improved spatial resolution when compared to conventional 360 0 reconstructions. The improvement is in the tangential direction, where simulations have indicated a FWHM improvement of 1 to 1.5 millimeters. The resolution in the radial direction is essentially the same for both methods. Visual inspection of the reconstructed images show improved resolution and contrast

DISTANCES TO DARK CLOUDS: COMPARING EXTINCTION DISTANCES TO MASER PARALLAX DISTANCES

International Nuclear Information System (INIS)

Foster, Jonathan B.; Jackson, James M.; Stead, Joseph J.; Hoare, Melvin G.; Benjamin, Robert A.

2012-01-01

We test two different methods of using near-infrared extinction to estimate distances to dark clouds in the first quadrant of the Galaxy using large near-infrared (Two Micron All Sky Survey and UKIRT Infrared Deep Sky Survey) surveys. Very long baseline interferometry parallax measurements of masers around massive young stars provide the most direct and bias-free measurement of the distance to these dark clouds. We compare the extinction distance estimates to these maser parallax distances. We also compare these distances to kinematic distances, including recent re-calibrations of the Galactic rotation curve. The extinction distance methods agree with the maser parallax distances (within the errors) between 66% and 100% of the time (depending on method and input survey) and between 85% and 100% of the time outside of the crowded Galactic center. Although the sample size is small, extinction distance methods reproduce maser parallax distances better than kinematic distances; furthermore, extinction distance methods do not suffer from the kinematic distance ambiguity. This validation gives us confidence that these extinction methods may be extended to additional dark clouds where maser parallaxes are not available.

Improved Iris Recognition through Fusion of Hamming Distance and Fragile Bit Distance.

Science.gov (United States)

Hollingsworth, Karen P; Bowyer, Kevin W; Flynn, Patrick J

2011-12-01

The most common iris biometric algorithm represents the texture of an iris using a binary iris code. Not all bits in an iris code are equally consistent. A bit is deemed fragile if its value changes across iris codes created from different images of the same iris. Previous research has shown that iris recognition performance can be improved by masking these fragile bits. Rather than ignoring fragile bits completely, we consider what beneficial information can be obtained from the fragile bits. We find that the locations of fragile bits tend to be consistent across different iris codes of the same eye. We present a metric, called the fragile bit distance, which quantitatively measures the coincidence of the fragile bit patterns in two iris codes. We find that score fusion of fragile bit distance and Hamming distance works better for recognition than Hamming distance alone. To our knowledge, this is the first and only work to use the coincidence of fragile bit locations to improve the accuracy of matches.

Singular Value Decomposition Method to Determine Distance Distributions in Pulsed Dipolar Electron Spin Resonance.

Science.gov (United States)

Srivastava, Madhur; Freed, Jack H

2017-11-16

Regularization is often utilized to elicit the desired physical results from experimental data. The recent development of a denoising procedure yielding about 2 orders of magnitude in improvement in SNR obviates the need for regularization, which achieves a compromise between canceling effects of noise and obtaining an estimate of the desired physical results. We show how singular value decomposition (SVD) can be employed directly on the denoised data, using pulse dipolar electron spin resonance experiments as an example. Such experiments are useful in measuring distances and their distributions, P(r) between spin labels on proteins. In noise-free model cases exact results are obtained, but even a small amount of noise (e.g., SNR = 850 after denoising) corrupts the solution. We develop criteria that precisely determine an optimum approximate solution, which can readily be automated. This method is applicable to any signal that is currently processed with regularization of its SVD analysis.

Machine learning enhanced optical distance sensor

Science.gov (United States)

Amin, M. Junaid; Riza, N. A.

2018-01-01

Presented for the first time is a machine learning enhanced optical distance sensor. The distance sensor is based on our previously demonstrated distance measurement technique that uses an Electronically Controlled Variable Focus Lens (ECVFL) with a laser source to illuminate a target plane with a controlled optical beam spot. This spot with varying spot sizes is viewed by an off-axis camera and the spot size data is processed to compute the distance. In particular, proposed and demonstrated in this paper is the use of a regularized polynomial regression based supervised machine learning algorithm to enhance the accuracy of the operational sensor. The algorithm uses the acquired features and corresponding labels that are the actual target distance values to train a machine learning model. The optimized training model is trained over a 1000 mm (or 1 m) experimental target distance range. Using the machine learning algorithm produces a training set and testing set distance measurement errors of learning. Applications for the proposed sensor include industrial scenario distance sensing where target material specific training models can be generated to realize low <1% measurement error distance measurements.

Measuring the Accuracy of Simple Evolving Connectionist System with Varying Distance Formulas

Science.gov (United States)

Al-Khowarizmi; Sitompul, O. S.; Suherman; Nababan, E. B.

2017-12-01

Simple Evolving Connectionist System (SECoS) is a minimal implementation of Evolving Connectionist Systems (ECoS) in artificial neural networks. The three-layer network architecture of the SECoS could be built based on the given input. In this study, the activation value for the SECoS learning process, which is commonly calculated using normalized Hamming distance, is also calculated using normalized Manhattan distance and normalized Euclidean distance in order to compare the smallest error value and best learning rate obtained. The accuracy of measurement resulted by the three distance formulas are calculated using mean absolute percentage error. In the training phase with several parameters, such as sensitivity threshold, error threshold, first learning rate, and second learning rate, it was found that normalized Euclidean distance is more accurate than both normalized Hamming distance and normalized Manhattan distance. In the case of beta fibrinogen gene -455 G/A polymorphism patients used as training data, the highest mean absolute percentage error value is obtained with normalized Manhattan distance compared to normalized Euclidean distance and normalized Hamming distance. However, the differences are very small that it can be concluded that the three distance formulas used in SECoS do not have a significant effect on the accuracy of the training results.

Respect distances. Rationale and means of computation

Energy Technology Data Exchange (ETDEWEB)

Munier, Raymond [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Hoekmark, Harald [Clay Technology, Lund (Sweden)

2004-12-01

Canisters with spent nuclear fuel can obviously not be located within deformation zones as this might jeopardise their long term mechanical stability and thereby constitute a potential hazard to the biosphere. Less apparent, but equally important, is the fact that earthquakes trigger reactivation, slip, of structures some distance from their hypocentres due to, among many other factors, stress redistribution. Fault slip across a deposition hole might damage the isolation capacity of the canister and thereby jeopardise the overall integrity of the barrier system. Therefore, the following question might be posed: What is the distance from a deformation zone beyond which a canister can be safely emplaced? This respect distance cannot be readily computed because, unknown future events aside, there are some complicated aspects that need to be addressed e.g. degree of conservatism, scale, our ability to model ice sheets and earthquakes, etc. In this report we discuss various aspects of the assignment of respect distances, propose a methodology for its assignment and apply the methodology to the Forsmark Site as a worked example. Our main concern, in the context discussed in this report, is the post glacial faults anticipated to occur after the next glaciations. To properly address conservativeness, analysis of risk, and its implementation in safety analysis, we provide an extensive compilation of our current knowledge on post glacial faults as an appendix.

Respect distances. Rationale and means of computation

International Nuclear Information System (INIS)

Munier, Raymond; Hoekmark, Harald

2004-12-01

Canisters with spent nuclear fuel can obviously not be located within deformation zones as this might jeopardise their long term mechanical stability and thereby constitute a potential hazard to the biosphere. Less apparent, but equally important, is the fact that earthquakes trigger reactivation, slip, of structures some distance from their hypocentres due to, among many other factors, stress redistribution. Fault slip across a deposition hole might damage the isolation capacity of the canister and thereby jeopardise the overall integrity of the barrier system. Therefore, the following question might be posed: What is the distance from a deformation zone beyond which a canister can be safely emplaced? This respect distance cannot be readily computed because, unknown future events aside, there are some complicated aspects that need to be addressed e.g. degree of conservatism, scale, our ability to model ice sheets and earthquakes, etc. In this report we discuss various aspects of the assignment of respect distances, propose a methodology for its assignment and apply the methodology to the Forsmark Site as a worked example. Our main concern, in the context discussed in this report, is the post glacial faults anticipated to occur after the next glaciations. To properly address conservativeness, analysis of risk, and its implementation in safety analysis, we provide an extensive compilation of our current knowledge on post glacial faults as an appendix

Critical Points in Distance Learning System

Directory of Open Access Journals (Sweden)

Airina Savickaitė

2013-08-01

Full Text Available Purpose – This article presents the results of distance learning system analysis, i.e. the critical elements of the distance learning system. The critical points of distance learning are a part of distance education online environment interactivity/community process model. The most important is the fact that the critical point is associated with distance learning participants. Design/methodology/approach – Comparative review of articles and analysis of distance learning module. Findings – A modern man is a lifelong learner and distance learning is a way to be a modern person. The focus on a learner and feedback is the most important thing of learning distance system. Also, attention should be paid to the lecture-appropriate knowledge and ability to convey information. Distance system adaptation is the way to improve the learner’s learning outcomes. Research limitations/implications – Different learning disciplines and learning methods may have different critical points. Practical implications – The information of analysis could be important for both lecturers and students, who studies distance education systems. There are familiar critical points which may deteriorate the quality of learning. Originality/value – The study sought to develop remote systems for applications in order to improve the quality of knowledge. Keywords: distance learning, process model, critical points. Research type: review of literature and general overview.

Determination of safety distance limits for a human near a cellular base station antenna, adopting the IEEE standard or ICNIRP guidelines.

Science.gov (United States)

Cooper, Justin; Marx, Bernd; Buhl, Johannes; Hombach, Volker

2002-09-01

This paper investigates the minimum distance for a human body in the near field of a cellular telephone base station antenna for which there is compliance with the IEEE or ICNIRP threshold values for radio frequency electromagnetic energy absorption in the human body. First, local maximum specific absorption rates (SARs), measured and averaged over volumes equivalent to 1 and to 10 g tissue within the trunk region of a physical, liquid filled shell phantom facing and irradiated by a typical GSM 900 base station antenna, were compared to corresponding calculated SAR values. The calculation used a homogeneous Visible Human body model in front of a simulated base station antenna of the same type. Both real and simulated base station antennas operated at 935 MHz. Antenna-body distances were between 1 and 65 cm. The agreement between measurements and calculations was excellent. This gave confidence in the subsequent calculated SAR values for the heterogeneous Visible Human model, for which each tissue was assigned the currently accepted values for permittivity and conductivity at 935 MHz. Calculated SAR values within the trunk of the body were found to be about double those for the homogeneous case. When the IEEE standard and the ICNIRP guidelines are both to be complied with, the local SAR averaged over 1 g tissue was found to be the determining parameter. Emitted power values from the antenna that produced the maximum SAR value over 1 g specified in the IEEE standard at the base station are less than those needed to reach the ICNIRP threshold specified for the local SAR averaged over 10 g. For the GSM base station antenna investigated here operating at 935 MHz with 40 W emitted power, the model indicates that the human body should not be closer to the antenna than 18 cm for controlled environment exposure, or about 95 cm for uncontrolled environment exposure. These safe distance limits are for SARs averaged over 1 g tissue. The corresponding safety distance limits

Exact geodesic distances in FLRW spacetimes

Science.gov (United States)

Cunningham, William J.; Rideout, David; Halverson, James; Krioukov, Dmitri

2017-11-01

Geodesics are used in a wide array of applications in cosmology and astrophysics. However, it is not a trivial task to efficiently calculate exact geodesic distances in an arbitrary spacetime. We show that in spatially flat (3 +1 )-dimensional Friedmann-Lemaître-Robertson-Walker (FLRW) spacetimes, it is possible to integrate the second-order geodesic differential equations, and derive a general method for finding both timelike and spacelike distances given initial-value or boundary-value constraints. In flat spacetimes with either dark energy or matter, whether dust, radiation, or a stiff fluid, we find an exact closed-form solution for geodesic distances. In spacetimes with a mixture of dark energy and matter, including spacetimes used to model our physical universe, there exists no closed-form solution, but we provide a fast numerical method to compute geodesics. A general method is also described for determining the geodesic connectedness of an FLRW manifold, provided only its scale factor.

A Critical Interpersonal Distance Switches between Two Coordination Modes in Kendo Matches

Science.gov (United States)

Okumura, Motoki; Kijima, Akifumi; Kadota, Koji; Yokoyama, Keiko; Suzuki, Hiroo; Yamamoto, Yuji

2012-01-01

In many competitive sports, players need to quickly and continuously execute movements that co-adapt to various movements executed by their opponents and physical objects. In a martial art such as kendo, players must be able to skillfully change interpersonal distance in order to win. However, very little information about the task and expertise properties of the maneuvers affecting interpersonal distance is available. This study investigated behavioral dynamics underlying opponent tasks by analyzing changes in interpersonal distance made by expert players in kendo matches. Analysis of preferred interpersonal distances indicated that players tended to step toward and away from their opponents based on two distances. The most preferred distance enabled the players to execute both striking and defensive movements immediately. The relative phase analysis of the velocities at which players executed steps toward and away revealed that players developed anti-phase synchronizations at near distances to maintain safe distances from their opponents. Alternatively, players shifted to in-phase synchronization to approach their opponents from far distances. This abrupt phase-transition phenomenon constitutes a characteristic bifurcation dynamics that regularly and instantaneously occurs between in- and anti-phase synchronizations at a critical interpersonal distance. These dynamics are profoundly affected by the task constraints of kendo and the physical constraints of the players. Thus, the current study identifies the clear behavioral dynamics that emerge in a sport setting. PMID:23284799

Robust haptic large distance telemanipulation for ITER

International Nuclear Information System (INIS)

Heck, D.J.F.; Heemskerk, C.J.M.; Koning, J.F.; Abbasi, A.; Nijmeijer, H.

2013-01-01

Highlights: • ITER remote handling maintenance can be controlled safely over a large distance. • Bilateral teleoperation experiments were performed in a local network. • Wave variables make the controller robust against constant communication delays. • Master and slave position synchronization guaranteed by proportional action. -- Abstract: During shutdowns, maintenance crews are expected to work in 24/6 shifts to perform critical remote handling maintenance tasks on the ITER system. In this article, we investigate the possibility to safely perform these haptic maintenance tasks remotely from control stations located anywhere around the world. To guarantee stability in time delayed bilateral teleoperation, the symmetric position tracking controller using wave variables is selected. This algorithm guarantees robustness against communication delays, can eliminate wave reflections and provide position synchronization of the master and slave devices. Experiments have been conducted under realistic local network bandwidth, latency and jitter constraints. They show sufficient transparency even for substantial communication delays

Robust haptic large distance telemanipulation for ITER

Energy Technology Data Exchange (ETDEWEB)

Heck, D.J.F., E-mail: d.j.f.heck@tue.nl [Eindhoven University of Technology, Department of Mechanical Engineering, Eindhoven (Netherlands); Heemskerk, C.J.M.; Koning, J.F. [Heemskerk Innovative Technologies, Sassenheim (Netherlands); Abbasi, A.; Nijmeijer, H. [Eindhoven University of Technology, Department of Mechanical Engineering, Eindhoven (Netherlands)

2013-10-15

Highlights: • ITER remote handling maintenance can be controlled safely over a large distance. • Bilateral teleoperation experiments were performed in a local network. • Wave variables make the controller robust against constant communication delays. • Master and slave position synchronization guaranteed by proportional action. -- Abstract: During shutdowns, maintenance crews are expected to work in 24/6 shifts to perform critical remote handling maintenance tasks on the ITER system. In this article, we investigate the possibility to safely perform these haptic maintenance tasks remotely from control stations located anywhere around the world. To guarantee stability in time delayed bilateral teleoperation, the symmetric position tracking controller using wave variables is selected. This algorithm guarantees robustness against communication delays, can eliminate wave reflections and provide position synchronization of the master and slave devices. Experiments have been conducted under realistic local network bandwidth, latency and jitter constraints. They show sufficient transparency even for substantial communication delays.

Interval MULTIMOORA method with target values of attributes based on interval distance and preference degree: biomaterials selection

Science.gov (United States)

Hafezalkotob, Arian; Hafezalkotob, Ashkan

2017-06-01

A target-based MADM method covers beneficial and non-beneficial attributes besides target values for some attributes. Such techniques are considered as the comprehensive forms of MADM approaches. Target-based MADM methods can also be used in traditional decision-making problems in which beneficial and non-beneficial attributes only exist. In many practical selection problems, some attributes have given target values. The values of decision matrix and target-based attributes can be provided as intervals in some of such problems. Some target-based decision-making methods have recently been developed; however, a research gap exists in the area of MADM techniques with target-based attributes under uncertainty of information. We extend the MULTIMOORA method for solving practical material selection problems in which material properties and their target values are given as interval numbers. We employ various concepts of interval computations to reduce degeneration of uncertain data. In this regard, we use interval arithmetic and introduce innovative formula for interval distance of interval numbers to create interval target-based normalization technique. Furthermore, we use a pairwise preference matrix based on the concept of degree of preference of interval numbers to calculate the maximum, minimum, and ranking of these numbers. Two decision-making problems regarding biomaterials selection of hip and knee prostheses are discussed. Preference degree-based ranking lists for subordinate parts of the extended MULTIMOORA method are generated by calculating the relative degrees of preference for the arranged assessment values of the biomaterials. The resultant rankings for the problem are compared with the outcomes of other target-based models in the literature.

Students Perceived Value towards Quality of Distance Education in Tamil Nadu

Science.gov (United States)

Jeyaraj, P.; Sugumar, D.; Thandavamoorthy, K.; Xavier, S. Joseph

2014-01-01

The quality of education of any distance learning programme is maintained by various ways, such as: quality of study material, internal and external evaluation, and student support methods and so on. The above aspects should be available in aspects to the Post graduate degree students. In this research Ex Post Facto research with field survey is…

An effective and safe gastric endoscopic submucosal dissection in the right lateral position using an inverted overtube

OpenAIRE

Mori, Hirohito; Rafiq, Kazi; Kobara, Hideki; Nishiyama, Noriko; Fujihara, Shintaro; Yachida, Tatsuo; Ayagi, Maki; Tani, Joji; Miyoshi, Hisaaki; Masaki, Tsutomu

2014-01-01

Previously, we reported the efficacy of a newly developed inverted overtube in shortening the hemostatic time and obtaining a clear endoscopic view in emergency endoscopic hemostasis. This device also helped us to perform gastric endoscopic submucosal dissection (ESD) more safely by changing the direction of gravity in the right lateral position. To perform a safe ESD, it is important to make an appropriate angle and distance between the electric knife and the gastric mucosa. In this position...

The Euclidean distance degree

NARCIS (Netherlands)

Draisma, J.; Horobet, E.; Ottaviani, G.; Sturmfels, B.; Thomas, R.R.; Zhi, L.; Watt, M.

2014-01-01

The nearest point map of a real algebraic variety with respect to Euclidean distance is an algebraic function. For instance, for varieties of low rank matrices, the Eckart-Young Theorem states that this map is given by the singular value decomposition. This article develops a theory of such nearest

Household's willingness to pay for arsenic safe drinking water in Bangladesh

NARCIS (Netherlands)

Khan, N.A.; Brouwer, R.; Yang, H.

2014-01-01

This study examines willingness to pay (WTP) in Bangladesh for arsenic (As) safe drinking water across different As-risk zones, applying a double bound discrete choice value elicitation approach. The study aims to provide a robust estimate of the benefits of As safe drinking water supply, which is

Timed Fast Exact Euclidean Distance (tFEED) maps

NARCIS (Netherlands)

Kehtarnavaz, Nasser; Schouten, Theo E.; Laplante, Philip A.; Kuppens, Harco; van den Broek, Egon

2005-01-01

In image and video analysis, distance maps are frequently used. They provide the (Euclidean) distance (ED) of background pixels to the nearest object pixel. In a naive implementation, each object pixel feeds its (exact) ED to each background pixel; then the minimum of these values denotes the ED to

76 FR 12719 - Safe Schools/Healthy Students Program; Office of Safe and Drug-Free Schools; Safe Schools/Healthy...

Science.gov (United States)

2011-03-08

... DEPARTMENT OF EDUCATION Safe Schools/Healthy Students Program; Office of Safe and Drug- Free Schools; Safe Schools/Healthy Students Program; Catalog of Federal Domestic Assistance (CFDA) Numbers: 84... priorities, requirements, and definitions under the Safe Schools/Healthy Students (SS/HS) program. Since...

Compression distance can discriminate animals by genetic profile, build relationship matrices and estimate breeding values.

Science.gov (United States)

Hudson, Nicholas J; Porto-Neto, Laercio; Kijas, James W; Reverter, Antonio

2015-10-13

Genetic relatedness is currently estimated by a combination of traditional pedigree-based approaches (i.e. numerator relationship matrices, NRM) and, given the recent availability of molecular information, using marker genotypes (via genomic relationship matrices, GRM). To date, GRM are computed by genome-wide pair-wise SNP (single nucleotide polymorphism) correlations. We describe a new estimate of genetic relatedness using the concept of normalised compression distance (NCD) that is borrowed from Information Theory. Analogous to GRM, the resultant compression relationship matrix (CRM) exploits numerical patterns in genome-wide allele order and proportion, which are known to vary systematically with relatedness. We explored properties of the CRM in two industry cattle datasets by analysing the genetic basis of yearling weight, a phenotype of moderate heritability. In both Brahman (Bos indicus) and Tropical Composite (Bos taurus by Bos indicus) populations, the clustering inferred by NCD was comparable to that based on SNP correlations using standard principal component analysis approaches. One of the versions of the CRM modestly increased the amount of explained genetic variance, slightly reduced the 'missing heritability' and tended to improve the prediction accuracy of breeding values in both populations when compared to both NRM and GRM. Finally, a sliding window-based application of the compression approach on these populations identified genomic regions influenced by introgression of taurine haplotypes. For these two bovine populations, CRM reduced the missing heritability and increased the amount of explained genetic variation for a moderately heritable complex trait. Given that NCD can sensitively discriminate closely related individuals, we foresee CRM having possible value for estimating breeding values in highly inbred populations.

Measuring distances between complex networks

International Nuclear Information System (INIS)

Andrade, Roberto F.S.; Miranda, Jose G.V.; Pinho, Suani T.R.; Lobao, Thierry Petit

2008-01-01

A previously introduced concept of higher order neighborhoods in complex networks, [R.F.S. Andrade, J.G.V. Miranda, T.P. Lobao, Phys. Rev. E 73 (2006) 046101] is used to define a distance between networks with the same number of nodes. With such measure, expressed in terms of the matrix elements of the neighborhood matrices of each network, it is possible to compare, in a quantitative way, how far apart in the space of neighborhood matrices two networks are. The distance between these matrices depends on both the network topologies and the adopted node numberings. While the numbering of one network is fixed, a Monte Carlo algorithm is used to find the best numbering of the other network, in the sense that it minimizes the distance between the matrices. The minimal value found for the distance reflects differences in the neighborhood structures of the two networks that arise only from distinct topologies. This procedure ends up by providing a projection of the first network on the pattern of the second one. Examples are worked out allowing for a quantitative comparison for distances among distinct networks, as well as among distinct realizations of random networks

A New Model of Stopping Sight Distance of Curve Braking Based on Vehicle Dynamics

Directory of Open Access Journals (Sweden)

Rong-xia Xia

2016-01-01

Full Text Available Compared with straight-line braking, cornering brake has longer braking distance and poorer stability. Therefore, drivers are more prone to making mistakes. The braking process and the dynamics of vehicles in emergency situations on curves were analyzed. A biaxial four-wheel vehicle was simplified to a single model. Considering the braking process, dynamics, force distribution, and stability, a stopping sight distance of the curve braking calculation model was built. Then a driver-vehicle-road simulation platform was built using multibody dynamic software. The vehicle test of brake-in-turn was realized in this platform. The comparison of experimental and calculated values verified the reliability of the computational model. Eventually, the experimental values and calculated values were compared with the stopping sight distance recommended by the Highway Route Design Specification (JTGD20-2006; the current specification of stopping sight distance does not apply to cornering brake sight distance requirements. In this paper, the general values and limits of the curve stopping sight distance are presented.

Cool and Safe: Multiplicity in Safe Innovation at Unilever

Science.gov (United States)

Penders, Bart

2011-01-01

This article presents the making of a safe innovation: the application of ice structuring protein (ISP) in edible ices. It argues that safety is not the absence of risk but is an active accomplishment; innovations are not "made safe afterward" but "safe innovations are made". Furthermore, there are multiple safeties to be accomplished in the…

Definition of distance for nonlinear time series analysis of marked point process data

Energy Technology Data Exchange (ETDEWEB)

Iwayama, Koji, E-mail: koji@sat.t.u-tokyo.ac.jp [Research Institute for Food and Agriculture, Ryukoku Univeristy, 1-5 Yokotani, Seta Oe-cho, Otsu-Shi, Shiga 520-2194 (Japan); Hirata, Yoshito; Aihara, Kazuyuki [Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 (Japan)

2017-01-30

Marked point process data are time series of discrete events accompanied with some values, such as economic trades, earthquakes, and lightnings. A distance for marked point process data allows us to apply nonlinear time series analysis to such data. We propose a distance for marked point process data which can be calculated much faster than the existing distance when the number of marks is small. Furthermore, under some assumptions, the Kullback–Leibler divergences between posterior distributions for neighbors defined by this distance are small. We performed some numerical simulations showing that analysis based on the proposed distance is effective. - Highlights: • A new distance for marked point process data is proposed. • The distance can be computed fast enough for a small number of marks. • The method to optimize parameter values of the distance is also proposed. • Numerical simulations indicate that the analysis based on the distance is effective.

Making Distance Visible: Assembling Nearness in an Online Distance Learning Programme

Directory of Open Access Journals (Sweden)

Jen Ross

2013-09-01

Full Text Available Online distance learners are in a particularly complex relationship with the educational institutions they belong to (Bayne, Gallagher, & Lamb, 2012. For part-time distance students, arrivals and departures can be multiple and invisible as students take courses, take breaks, move into independent study phases of a programme, find work or family commitments overtaking their study time, experience personal upheaval or loss, and find alignments between their professional and academic work. These comings and goings indicate a fluid and temporary assemblage of engagement, not a permanent or stable state of either “presence” or “distance”. This paper draws from interview data from the “New Geographies of Learning” project, a research project exploring the notions of space and institution for the MSc in Digital Education at the University of Edinburgh, and from literature on distance learning and online community. The concept of nearness emerged from the data analyzing the comings and goings of students on a fully online programme. It proposes that “nearness” to a distance programme is a temporary assemblage of people, circumstances, and technologies. This state is difficult to establish and impossible to sustain in an uninterrupted way over the long period of time that many are engaged in part-time study. Interruptions and subsequent returns should therefore be seen as normal in the practice of studying as an online distance learner, and teachers and institutions should work to help students develop resilience in negotiating various states of nearness. Four strategies for increasing this resilience are proposed: recognising nearness as effortful; identifying affinities; valuing perspective shifts; and designing openings.

Stress distribution at the dissimilar metal weld of safety injection nozzle according to safe-end length and SMW thickness

International Nuclear Information System (INIS)

Kim, Tae Jin; Jeong, Woo Chul; Huh, Nam Su

2015-01-01

In the present paper, we evaluate the effects of the safe-end length and thickness of the similar metal weld (SMW) of safety injection nozzles on stress distributions at the dissimilar metal weld (DMW). For this evaluation, we carry out detailed 2-D axisymmetric finite element analyses by considering four different values of the safe-end length and four different values of the thickness of SMW. Based on the results obtained, we found that the SMW thickness affects the axial stresses at the center of the DMW for the shorter safe-end length; on the other hand, it does not affect the hoop stresses. In terms of the safe-end length, the values of the axial and hoop stresses at the inner surface of the DMW center increase as the safe-end length increases. In particular, for the cases considered in the present study, the stress distributions at the DMW center can be categorized according to certain values of safe-end length

Determining average yarding distance.

Science.gov (United States)

Roger H. Twito; Charles N. Mann

1979-01-01

Emphasis on environmental and esthetic quality in timber harvesting has brought about increased use of complex boundaries of cutting units and a consequent need for a rapid and accurate method of determining the average yarding distance and area of these units. These values, needed for evaluation of road and landing locations in planning timber harvests, are easily and...

Challenges of safe medication practice in paediatric care--a nursing perspective.

Science.gov (United States)

Star, Kristina; Nordin, Karin; Pöder, Ulrika; Edwards, I Ralph

2013-05-01

To explore nurses' experiences of handling medications in paediatric clinical practice, with a focus on factors that hinder and facilitate safe medication practices. Twenty nurses (registered nurses) from four paediatric wards at two hospitals in Sweden were interviewed in focus groups. The interviews were analysed using content analysis. Six themes emerged from the analysed interviews: the complexity specific for nurses working on paediatric wards is a hindrance to safe medication practices; nurses' concerns about medication errors cause a considerable psychological burden; the individual nurse works hard for safe medication practices and values support from other nurse colleagues; circumstances out of the ordinary are perceived as critical challenges for maintaining patient safety; nurses value clear instructions, guidelines and routines, but these are often missing, variable or changeable; management, other medical professionals, the pharmacy, the pharmaceutical industry and informatics support need to respond to the requirements of the nurses' working situations to improve safe medication practices. Weaknesses were apparent in the long chain of the medication-delivery process. A joint effort by different professions involved in that delivery process, and a nationwide collaboration between hospitals is recommended to increase safe medication practices in paediatric care. ©2013 Foundation Acta Paediatrica. Published by Blackwell Publishing Ltd.

Method of measuring distance between fuel element

International Nuclear Information System (INIS)

Urata, Megumu.

1991-01-01

The distance between fuel elements contained in a pool is measured in a contactless manner even for a narrow distance less than 1 mm. That is, the equipment for measuring the distance between spent fuel elements of a spent fuel assembly in a nuclear reactor comprises a optical fiber scope, a lens, an industrial TV camera and a monitor TV. The top end of the optical fiber scope is inserted between fuel elements to be measured. The state thereof is displayed on the TV screen to measure the distance between the fuel elements. The measured results are compared with a previously formed calibration curve to determine the value between the fuel elements. Then, the distance between the fuel elements can be determined in the pool of a power plant without dismantling the fuel assembly, to investigate the state of the bending and estimate the fuel working life. (I.S.)

Design of 3D eye-safe middle range vibrometer

International Nuclear Information System (INIS)

Polulyakh, Valeriy; Poutivski, Iouri

2014-01-01

Laser Doppler Vibrometer and Range Meter (3D-MRV) is designed for middle range distances [1–100 meters]. 3D-MRV combines more than one laser in one device for a simultaneous real time measuring the distance and movement of the targets. The first laser has a short pulse (t∼30psec) and low energy (E∼200nJ) for distance measurement and the second one is a CW (continuous wave) single frequency laser for the velocity measurement with output power (P∼30mW). Both lasers perform on the eye-safe wavelength 1.5 μm. 3D-MRV uses the same mono-static optical transmitting and receiving channel for both lasers including an output telescope and a scanning angular system. 3D-MRV has an optical polarization switch to combine linear polarized laser beams from two lasers into one optical channel. The laser beams from both lasers by turns illuminate the target and the scattered laser radiation is collected by the telescope on a photo detector. The electrical signal from photo detector is used for measuring the distance to the target and its movement. For distance measurement the time of flight method is employed. For targets movement the optical heterodyne method is employed. The received CW laser radiation is mixed on a photo detector with the frequency-shifted laser radiation that is taken from CW laser and passed through an acousto-optic cell. The electrical signal from a photo detector on the difference frequency and phase has information about movement of the scattered targets. 3D-MVR may be used for the real time picturing of vibration of the extensive targets like bridges or aircrafts

Design of 3D eye-safe middle range vibrometer

Energy Technology Data Exchange (ETDEWEB)

Polulyakh, Valeriy [Advanced Data Security, 1933 O' Toole Way, San Jose, CA 95131 (United States); Poutivski, Iouri [Terimber Corporation, 2456 Homewood Drive, San Jose, CA 95128, USA and Facebook Inc, 1601 Willow Road, Menlo Park, CA 94025 (United States)

2014-05-27

Laser Doppler Vibrometer and Range Meter (3D-MRV) is designed for middle range distances [1–100 meters]. 3D-MRV combines more than one laser in one device for a simultaneous real time measuring the distance and movement of the targets. The first laser has a short pulse (t∼30psec) and low energy (E∼200nJ) for distance measurement and the second one is a CW (continuous wave) single frequency laser for the velocity measurement with output power (P∼30mW). Both lasers perform on the eye-safe wavelength 1.5 μm. 3D-MRV uses the same mono-static optical transmitting and receiving channel for both lasers including an output telescope and a scanning angular system. 3D-MRV has an optical polarization switch to combine linear polarized laser beams from two lasers into one optical channel. The laser beams from both lasers by turns illuminate the target and the scattered laser radiation is collected by the telescope on a photo detector. The electrical signal from photo detector is used for measuring the distance to the target and its movement. For distance measurement the time of flight method is employed. For targets movement the optical heterodyne method is employed. The received CW laser radiation is mixed on a photo detector with the frequency-shifted laser radiation that is taken from CW laser and passed through an acousto-optic cell. The electrical signal from a photo detector on the difference frequency and phase has information about movement of the scattered targets. 3D-MVR may be used for the real time picturing of vibration of the extensive targets like bridges or aircrafts.

Association between cultural distance and migrant self-rated health.

Science.gov (United States)

Detollenaere, Jens; Baert, Stijn; Willems, Sara

2018-03-01

We study whether migrant health in Europe is associated with the cultural distance between their host country and country of origin. To this end, we run multilevel regression models on data merging self-rated health and social background of ≥3800 migrants from the European Social Survey with an index of cultural distance based on country differences in values, norms and attitudes measured in the World Values Survey. We find that higher levels of cultural distance are associated with worse migrant health. This association is comparable in size with the negative association between health and female (compared with male) gender but less important than the association between health and education level. In addition, this association is less significant among second-generation than first-generation migrants.

Exploring the Use of Electronic Mobile Technologies among Distance Learners in Rural Communities for Safe and Disruptive Learning

Science.gov (United States)

Ntloedibe-Kuswani, Gomang Seratwa

2013-01-01

Several studies indicated the potential of electronic mobile technologies in reaching (safe learning) under-served communities and engaging (disruptive learning) disadvantaged peoples affording them learning experiences. However, the potential benefits of (electronic mobile learning) e-mobile learning have not been well understood from the…

The interuncal distance in elderly patients with dementia

International Nuclear Information System (INIS)

Hanyu, Haruo; Takasaki, Masaru; Sugiyama, Takeshi; Abe, Shinei; Kobayashi, Yasutaka; Maehata, Yukihiko; Katsunuma, Hidetaka.

1993-01-01

The interuncal distance between the unci of the temporal lobes was measured from axial MR images of the brain in elderly patients with dementia including dementia of the Alzheimer type (DAT), vascular dementia (VD), and others. The measured value of the interuncal distance completely separated patients with DAT from normal controls, and there was significant diference in the interuncal distance between patients with DAT and VD. This measurement is a practical method of assessing hippocampal atrophy and appears to be a useful adjunct in the clinical diagnosis of DAT. (author)

Comparative evaluation of ultrasound scanner accuracy in distance measurement

Science.gov (United States)

Branca, F. P.; Sciuto, S. A.; Scorza, A.

2012-10-01

The aim of the present study is to develop and compare two different automatic methods for accuracy evaluation in ultrasound phantom measurements on B-mode images: both of them give as a result the relative error e between measured distances, performed by 14 brand new ultrasound medical scanners, and nominal distances, among nylon wires embedded in a reference test object. The first method is based on a least squares estimation, while the second one applies the mean value of the same distance evaluated at different locations in ultrasound image (same distance method). Results for both of them are proposed and explained.

Universal Safety Distance Alert Device for Road Vehicles

Directory of Open Access Journals (Sweden)

Matic Virant

2016-04-01

Full Text Available Driving with too short of a safety distance is a common problem in road traffic, often with traffic accidents as a consequence. Research has identified a lack of vehicle-mountable devices for alerting the drivers of trailing vehicles about keeping a sufficient safe distance. The principal requirements for such a device were defined. A conceptual study was performed in order to select the components for the integration of the device. Based on the results of this study, a working prototype of a flexible, self-contained device was designed, built and tested. The device is intended to be mounted on the rear of a vehicle. It uses radar as the primary distance sensor, assisted with a GPS receiver for velocity measurement. A Raspberry Pi single-board computer is used for data acquisition and processing. The alerts are shown on an LED-matrix display mounted on the rear of the host vehicle. The device software is written in Python and provides automatic operation without requiring any user intervention. The tests have shown that the device is usable on almost any motor vehicle and performs reliably in simulated and real traffic. The open issues and possibilities for future improvements are presented in the Discussion.

The SafeCOP ECSEL Project: Safe Cooperating Cyber-Physical Systems Using Wireless Communication

DEFF Research Database (Denmark)

Pop, Paul; Scholle, Detlef; Hansson, Hans

2016-01-01

This paper presents an overview of the ECSEL project entitled "Safe Cooperating Cyber-Physical Systems using Wireless Communication" (SafeCOP), which runs during the period 2016 -- 2019. SafeCOP targets safety-related Cooperating Cyber-Physical Systems (CO-CPS) characterised by use of wireless...... detection of abnormal behaviour, triggering if needed a safe degraded mode. SafeCOP will also develop methods and tools, which will be used to produce safety assurance evidence needed to certify cooperative functions. SafeCOP will extend current wireless technologies to ensure safe and secure cooperation...

Near-IR TRGB Distance to Dwarf Elliptical Galaxy NGC 147

Directory of Open Access Journals (Sweden)

A. Kang

2007-09-01

Full Text Available We report the distance modulus of nearby dwarf elliptical galaxy NGC 147 estimated from the Tip of Red-giant Branch (TRGB method applying to the color-magnitude diagrams and luminosity functions in the near-infrared JHK bands. Apparent magnitudes of TRGBs in each band are obtained by applying Savitzky-Golay filter to the luminosity functions, and the theoretical absolute magnitudes are estimated from Yonsei-Yale isochrones. The derived values of distance modulus to NGC 147 are (m-M=23.69±0.12, 23.78±0.17, and 23.85±0.22 for J, H, and K bands, respectively. Distance modulus in bolometric magnitude is also derived as (m-M=23.87±0.11. We compare the derived values of the TRGB distance modulus to NGC 147 in the near-infrared bands with the previous results in other bands.

The opinion of university students on distance education using ICT

Directory of Open Access Journals (Sweden)

José Ignacio Baile Ayensa

2016-01-01

Full Text Available Introduction. Distance education within the university context has been spread worldwide for more than four decades and has been mainly developed in the last years thanks to the use of the information and communications technology (ICT. There are few studies investigating the opinion of university students on distance education using ICT tools compared with traditional learning (face to face. There are no studies on the best valued teaching techniques either nor why they are considered so. This lack of research justifies the present study. Methodology. A survey was conducted among university students of Psychology from the Open University of Madrid (Udima. 177 students took part in the study filling in a 15 item questionnaire through a Google Docs. Results. The students consider distance education using ICT to be better or as good as traditional (face to face education; they also highly value this methodology as far as the improvement of their capabilities and academic achievement is concerned. Besides, the best valued didactic tools are those that seem to allow higher autonomy to the student and have less technological demands. Discussion. The results of this research are similar to those found in previous studies that analyzed other educational levels or populations. Paradoxically, synchronous or more innovative tools were not the best valued, probably because of the unique profile of the student within the distance education system.

Safe Kids Worldwide

Science.gov (United States)

... Blog Videos Newsletter facebook twitter instagram pinterest gplus youtube Search Menu Why It Matters Who We Are What We Do Find Your Safe Kids Safe Kids Day Main menu Keeping All Kids Safe Safety Tips Get Involved 4 Star Charity Donate Text Burns and Scalds 4 tips ...

Distance between configurations in Markov chain Monte Carlo simulations

Science.gov (United States)

Fukuma, Masafumi; Matsumoto, Nobuyuki; Umeda, Naoya

2017-12-01

For a given Markov chain Monte Carlo algorithm we introduce a distance between two configurations that quantifies the difficulty of transition from one configuration to the other configuration. We argue that the distance takes a universal form for the class of algorithms which generate local moves in the configuration space. We explicitly calculate the distance for the Langevin algorithm, and show that it certainly has desired and expected properties as distance. We further show that the distance for a multimodal distribution gets dramatically reduced from a large value by the introduction of a tempering method. We also argue that, when the original distribution is highly multimodal with large number of degenerate vacua, an anti-de Sitter-like geometry naturally emerges in the extended configuration space.

How did aviation become so safe, and beyond?

NARCIS (Netherlands)

Stoop, J.A.A.M.

2017-01-01

Aviation has been recognized as one of the ultimate safe socio-technical systems. This contribution discusses the conditions and context that moulded the system safety to its present level by applying integral safety, a sectoral approach and safety as a strategic value. At present the aviation

Computing the Feng-Rao distances for codes from order domains

DEFF Research Database (Denmark)

Ruano Benito, Diego

2007-01-01

We compute the Feng–Rao distance of a code coming from an order domain with a simplicial value semigroup. The main tool is the Apéry set of a semigroup that can be computed using a Gröbner basis.......We compute the Feng–Rao distance of a code coming from an order domain with a simplicial value semigroup. The main tool is the Apéry set of a semigroup that can be computed using a Gröbner basis....

Ministerial formation of theological students through distance education

Directory of Open Access Journals (Sweden)

Marilyn Naidoo

2012-02-01

Full Text Available Ministerial formation is a multifaceted activity involving critical thinking, the acquisition of knowledge, skills development, religious identity formation and the development of ministerial and spiritual maturity expected of church ministers. Education is not merely the accumulation of a prescribed set of academic credits but includes the holistic formation of all aspects of the individual. However, theological educators are concerned about the capacity to foster such values and skills in the distance and electronic environment. Some see distance education as ‘distancing’ the students in more significant ways than simply geographic distance. These issues are of fundamental importance for they reflect the deeper convictions of theologians that distance education may not be a suitable medium for ministerial formation. This article creates a conceptual map of the theological and pedagogical challenges for ministerial formation and highlights how the possibility of formation is being carried out in the distance-learning environment.

Establishment, maintenance, and re-establishment of the safe and efficient steady-following state

International Nuclear Information System (INIS)

Pan Deng; Zheng Ying-Ping

2015-01-01

We present an integrated mathematical model of vehicle-following control for the establishment, maintenance, and re-establishment of the previous or new safe and efficient steady-following state. The hyperbolic functions are introduced to establish the corresponding mathematical models, which can describe the behavioral adjustment of the following vehicle steered by a well-experienced driver under complex vehicle following situations. According to the proposed mathematical models, the control laws of the following vehicle adjusting its own behavior can be calculated for its moving in safety, efficiency, and smoothness (comfort). Simulation results show that the safe and efficient steady-following state can be well established, maintained, and re-established by its own smooth (comfortable) behavioral adjustment with the synchronous control of the following vehicle’s velocity, acceleration, and the actual following distance. (paper)

Cultural distance and international trade: a non-linear relationship

NARCIS (Netherlands)

Lankhuizen, M.B.M.; de Groot, H.L.F.

2016-01-01

This paper investigates the effect of culture on trade using measures of cultural distance based on various dimensions of national culture from Hofstede (Culture’s Consequences: International Differences in Work-Related Values, 1980; Culture’s Consequences: Comparing Values, Behaviors, Institutions

Bin Ratio-Based Histogram Distances and Their Application to Image Classification.

Science.gov (United States)

Hu, Weiming; Xie, Nianhua; Hu, Ruiguang; Ling, Haibin; Chen, Qiang; Yan, Shuicheng; Maybank, Stephen

2014-12-01

Large variations in image background may cause partial matching and normalization problems for histogram-based representations, i.e., the histograms of the same category may have bins which are significantly different, and normalization may produce large changes in the differences between corresponding bins. In this paper, we deal with this problem by using the ratios between bin values of histograms, rather than bin values' differences which are used in the traditional histogram distances. We propose a bin ratio-based histogram distance (BRD), which is an intra-cross-bin distance, in contrast with previous bin-to-bin distances and cross-bin distances. The BRD is robust to partial matching and histogram normalization, and captures correlations between bins with only a linear computational complexity. We combine the BRD with the ℓ1 histogram distance and the χ(2) histogram distance to generate the ℓ1 BRD and the χ(2) BRD, respectively. These combinations exploit and benefit from the robustness of the BRD under partial matching and the robustness of the ℓ1 and χ(2) distances to small noise. We propose a method for assessing the robustness of histogram distances to partial matching. The BRDs and logistic regression-based histogram fusion are applied to image classification. The experimental results on synthetic data sets show the robustness of the BRDs to partial matching, and the experiments on seven benchmark data sets demonstrate promising results of the BRDs for image classification.

Programmable shunts and headphones: Are they safe together?

Science.gov (United States)

Spader, Heather S; Ratanaprasatporn, Linda; Morrison, John F; Grossberg, Jonathan A; Cosgrove, G Rees

2015-10-01

Programmable shunts have a valuable role in the treatment of patients with hydrocephalus, but because a magnet is used to change valve settings, interactions with external magnets may reprogram these shunts. Previous studies have demonstrated the ability of magnetic toys and iPads to erroneously reprogram shunts. Headphones are even more ubiquitous, and they contain an electromagnet for sound projection that sits on the head very close to the shunt valve. This study is the first to look at the magnetic field emissions of headphones and their effect on reprogrammable shunt valves to ascertain whether headphones are safe for patients with these shunts to wear. In this in vitro study of the magnetic properties of headphones and their interactions with 3 different programmable shunts, the authors evaluated Apple earbuds, Beats by Dr. Dre, and Bose QuietComfort Acoustic Noise Cancelling headphones. Each headphone was tested for electromagnetic field emissions using a direct current gaussmeter. The following valves were evaluated: Codman Hakim programmable valve, Medtronic Strata II valve, and Aesculap proGAV. Each valve was tested at distances of 0 to 50 mm (in 5-mm increments) from each headphone. The exposure time at each distance was 1 minute, and 3 trials were performed to confirm results at each valve setting and distance. All 3 headphones generated magnetic fields greater than the respective shunt manufacturer's recommended strength of exposure, but these fields did not persist beyond 5 mm. By 2 cm, the fields levels were below 20 G, well below the Medtronic recommendation of 90 G and the Codman recommendation of 80 G. Because the mechanism for the proGAV is different, there is no recommended gauss level. There was no change in gauss-level emissions by the headphones with changes in frequency and amplitude. Both the Strata and Codman-Hakim valves were reprogrammed by direct contact (distance 0 mm) with the Bose headphones. When a rotation component was added, all

"Same Room, Safe Place".

Science.gov (United States)

Keene Woods, Nikki

2017-04-01

There are many different professional stances on safe sleep and then there is the reality of caring for a newborn. There is a debate among professionals regarding safe sleep recommendations. The continum of recommendations vary from the American Academy of Pediatrics (AAP) Safe Sleep Guidelines to the bed-sharing recommendations from the Mother-Baby Behavioral Sleep Laboratory. The lack of consistent and uniform safe sleep recommendations from health professionals has been confusing for families but has more recently raised a real professional ethical dilemma. Despite years of focused safe sleep community education and interventions, sleep-related infant deaths are on the rise in many communities. This commentary calls for a united safe sleep message from all health professionals to improve health for mothers and infants most at-risk, "Same Room, Safe Place."

Determination of safe radioactive releases to the atmosphere from the nuclear power site, Dynefontein

International Nuclear Information System (INIS)

Basson, J.K.; Van As, D.

1976-01-01

South Africa's first nuclear power station, Koeberg A, is to be built by Escom at Dynefontein, 28 km north of Cape Town, and the experience gained at the National Nuclear Research Centre, Pelindaba, has been used by the AEB as basis for the pre-operational investigation. The capacity of the environment to accept airborne radioactive effluent safely depends on various local factors such as dispersion conditions, the ecology, the habits of the local population and the accumulation, through critical pathways, of pertinent radionuclides. Long-term average dilution factors at varying distances from a 100m stack have been calculated by ESCOM from mesometeorological data collected by the CSIR. On the basis of available data, permissible release rates are derived for radioisotopes of the noble gases (critical pathway:external cloud exposure), 131 I, 137 Cs, 106 Ru, 125 Sb and 114 Ce and tritium. Although final confirmation of these values can only be obtained after operation, such a pre-operational survey may serve as an example to conventional industry [af

Transient diagnosis system using quantum-inspired computing and Minkowski distance

Energy Technology Data Exchange (ETDEWEB)

Nicolau, Andressa dos Santos; Schirru, Roberto, E-mail: andressa@lmp.ufrj.b, E-mail: schirru@lmp.ufrj.b [Federal University of Rio de Janeiro (PEN/COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Nuclear Engineering Program

2011-07-01

This paper proposes a diagnosis system model for identification of transient in a PWR nuclear power plant, optimized by the Quantum Inspired Evolutionary Algorithm - QEA in order to help nuclear power plant operator reduce his cognitive load and increase his available time to maintain the plant operating in a safe condition. This method was developed in order to be able to recognize the normal condition and three accidents of the design basis list of the nuclear power plant Angra 2, postulated in the Final Safety Analysis Report (FSAR). This System compares the similarly distance between the set of variables of the anomalous event, in a given time t, and the centroids of the design-basis transient variables. The lower similarly distance indicates the class of the transient to which the anomalous event belongs. The QEA was then used to find the best position of the centroids of each class of the selected transients. Such positions maximize the number of the correct classifications. Unlike the diagnosis system proposed in the literature, Minkowski distance was employed to calculate the similarity distance. The signatures of four transients were submitted to 1% and 2% of noise, and tested with prototype vector found by QEA. The results showed that the present transient diagnostic system was successfully implemented in the nuclear accident identification problem and was compatible with the techniques presented in the literature. (author)

Transient diagnosis system using quantum-inspired computing and Minkowski distance

International Nuclear Information System (INIS)

Nicolau, Andressa dos Santos; Schirru, Roberto

2011-01-01

This paper proposes a diagnosis system model for identification of transient in a PWR nuclear power plant, optimized by the Quantum Inspired Evolutionary Algorithm - QEA in order to help nuclear power plant operator reduce his cognitive load and increase his available time to maintain the plant operating in a safe condition. This method was developed in order to be able to recognize the normal condition and three accidents of the design basis list of the nuclear power plant Angra 2, postulated in the Final Safety Analysis Report (FSAR). This System compares the similarly distance between the set of variables of the anomalous event, in a given time t, and the centroids of the design-basis transient variables. The lower similarly distance indicates the class of the transient to which the anomalous event belongs. The QEA was then used to find the best position of the centroids of each class of the selected transients. Such positions maximize the number of the correct classifications. Unlike the diagnosis system proposed in the literature, Minkowski distance was employed to calculate the similarity distance. The signatures of four transients were submitted to 1% and 2% of noise, and tested with prototype vector found by QEA. The results showed that the present transient diagnostic system was successfully implemented in the nuclear accident identification problem and was compatible with the techniques presented in the literature. (author)

Distance Metric Tracking

Science.gov (United States)

2016-03-02

whereBψ is any Bregman divergence and ηt is the learning rate parameter. From (Hall & Willett, 2015) we have: Theorem 1. G` = max θ∈Θ,`∈L ‖∇f(θ)‖ φmax = 1...Kullback-Liebler divergence between an initial guess of the matrix that parameterizes the Mahalanobis distance and a solution that satisfies a set of...Bregman divergence and ηt is the learning rate parameter. M̂0, µ̂0 are initialized to some initial value. In [18] a closed-form algorithm for solving

Quantum chromodynamics at large distances

International Nuclear Information System (INIS)

Arbuzov, B.A.

1987-01-01

Properties of QCD at large distances are considered in the framework of traditional quantum field theory. An investigation of asymptotic behaviour of lower Green functions in QCD is the starting point of the approach. The recent works are reviewed which confirm the singular infrared behaviour of gluon propagator M 2 /(k 2 ) 2 at least under some gauge conditions. A special covariant gauge comes out to be the most suitable for description of infrared region due to absence of ghost contributions to infrared asymptotics of Green functions. Solutions of Schwinger-Dyson equation for quark propagator are obtained in this special gauge and are shown to possess desirable properties: spontaneous breaking of chiral invariance and nonperturbative character. The infrared asymptotics of lower Green functions are used for calculation of vacuum expectation values of gluon and quark fields. These vacuum expectation values are obtained in a good agreement with the corresponding phenomenological values which are needed in the method of sum rules in QCD, that confirms adequacy of the infrared region description. The consideration of a behaviour of QCD at large distances leads to the conclusion that at contemporary stage of theory development one may consider two possibilities. The first one is the well-known confinement hypothesis and the second one is called incomplete confinement and stipulates for open color to be observable. Possible manifestations of incomplete confinement are discussed

Image integration into 3-dimensional-electro-anatomical mapping system facilitates safe ablation of ventricular arrhythmias originating from the aortic root and its vicinity.

Science.gov (United States)

Jularic, Mario; Akbulak, Ruken Özge; Schäffer, Benjamin; Moser, Julia; Nuehrich, Jana; Meyer, Christian; Eickholt, Christian; Willems, Stephan; Hoffmann, Boris A

2018-03-01

During ablation in the vicinity of the coronary arteries establishing a safe distance from the catheter tip to the relevant vessels is mandatory and usually assessed by fluoroscopy alone. The aim of the study was to investigate the feasibility of an image integration module (IIM) for continuous monitoring of the distance of the ablation catheter tip to the main coronary arteries during ablation of ventricular arrhythmias (VA) originating in the sinus of valsalva (SOV) and the left ventricular summit part of which can be reached via the great cardiac vein (GCV). Of 129 patients undergoing mapping for outflow tract arrhythmias from June 2014 till October 2015, a total of 39 patients (52.4 ± 18.1 years, 17 female) had a source of origin in the SOV or the left ventricular summit. Radiofrequency (RF) ablation was performed when a distance of at least 5 mm could be demonstrated with IIM. A safe distance in at least one angiographic plane could be demonstrated in all patients with a source of origin in the SOV, whereas this was not possible in 50% of patients with earliest activation in the summit area. However, using the IIM a safe position at an adjacent site within the GCV could be obtained in three of these cases and successful RF ablation performed safely without any complications. Ablation was successful in 100% of patients with an origin in the SOV, whereas VAs originating from the left ventricular summit could be abolished completely in only 60% of cases. Image integration combining electroanatomical mapping and fluoroscopy allows assessment of the safety of a potential ablation site by continuous real-time monitoring of the spatial relations of the catheter tip to the coronary vessels prior to RF application. It aids ablation in anatomically complex regions like the SOV or the ventricular summit providing biplane angiograms merged into the three-dimensional electroanatomical map. Published on behalf of the European Society of Cardiology. All rights reserved. �

Fixation distance and fixation duration to vertical road signs.

Science.gov (United States)

Costa, Marco; Simone, Andrea; Vignali, Valeria; Lantieri, Claudio; Palena, Nicola

2018-05-01

The distance of first-fixation to vertical road signs was assessed in 22 participants while driving a route of 8.34 km. Fixations to road signs were recorded by a mobile eye-movement-tracking device synchronized to GPS and kinematic data. The route included 75 road signs. First-fixation distance and fixation duration distributions were positively skewed. Median distance of first-fixation was 51 m. Median fixation duration was 137 ms with a modal value of 66 ms. First-fixation distance was linearly related to speed and fixation duration. Road signs were gazed at a much closer distance than their visibility distance. In a second study a staircase procedure was used to test the presentation-time threshold that lead to a 75% accuracy in road sign identification. The threshold was 35 ms, showing that short fixations to a road signs could lead to a correct identification. Copyright © 2018 Elsevier Ltd. All rights reserved.

ETHICAL PERSPECTIVES IN OPEN AND DISTANCE EDUATION SYSTEM

Directory of Open Access Journals (Sweden)

C. ANITHA (Corresponding Author,

2013-01-01

Full Text Available Today, e-learning and various online education applications are used in many countries and educational institutions than ever before. Ethics deals with the principle governing ideal or good behavior, it focuses on what is right or what is wrong. Although in education, the ethical issues that they may be facing are not about of life and death issues. An ethical dilemma will take place when the educator faced with a decision that maybe incongruent with the organization’s values and policies. There are several examples of ethical issues in education. In this reason, the educator must be guided with the appropriate decision-making strategies. With the increasing use of new communication technologies, adoption of distance education by traditional educational institutes and owing to growing demand on the part of learners, it becomes more important to discuss the ethical issues. This important title provides academicians, students, and professionals with ethical insight into the world of e-learning through fascinating case studies that elucidate the issues through real-world examples. Pioneer’s experience in the field of distance education indicates that the profile of distance learners varies, cutting across barriers of gender, class and caste. The distance learner may be suffering from a sense of isolation as he/she makes a return to study after a gap of time or while working. It is there that the distance educator makes a positive, ethical and interventionist role by helping the student to learn beyond the stereotypical classroom situation and can act effectively as the friend, philosopher and guide of the learner. However, the industry of education is a serious one, requiring well defined ethics and values, well bound in visible legal outlines to regulate its exchange and distribution. Because as the industry grows, so do the issues of ethical concern such as plagiarism, electronic voyeurism, and licensing. The objective of this paper is to

DroidSafe

Science.gov (United States)

2016-12-01

Massachusetts Avenue, Build E19-750 Cambridge , MA 02139-4307 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS...Activity objects illustrating the challenges of points-to and information flow analysis...measure how many malicious flows Droid- Safe was able to detect). As these results illustrate , DroidSafe implements an analysis of unprece- dented

PERBANDINGAN EUCLIDEAN DISTANCE DENGAN CANBERRA DISTANCE PADA FACE RECOGNITION

Directory of Open Access Journals (Sweden)

Sendhy Rachmat Wurdianarto

2014-08-01

Full Text Available Perkembangan ilmu pada dunia komputer sangatlah pesat. Salah satu yang menandai hal ini adalah ilmu komputer telah merambah pada dunia biometrik. Arti biometrik sendiri adalah karakter-karakter manusia yang dapat digunakan untuk membedakan antara orang yang satu dengan yang lainnya. Salah satu pemanfaatan karakter / organ tubuh pada setiap manusia yang digunakan untuk identifikasi (pengenalan adalah dengan memanfaatkan wajah. Dari permasalahan diatas dalam pengenalan lebih tentang aplikasi Matlab pada Face Recognation menggunakan metode Euclidean Distance dan Canberra Distance. Model pengembangan aplikasi yang digunakan adalah model waterfall. Model waterfall beriisi rangkaian aktivitas proses yang disajikan dalam proses analisa kebutuhan, desain menggunakan UML (Unified Modeling Language, inputan objek gambar diproses menggunakan Euclidean Distance dan Canberra Distance. Kesimpulan yang dapat ditarik adalah aplikasi face Recognation menggunakan metode euclidean Distance dan Canverra Distance terdapat kelebihan dan kekurangan masing-masing. Untuk kedepannya aplikasi tersebut dapat dikembangkan dengan menggunakan objek berupa video ataupun objek lainnya.   Kata kunci : Euclidean Distance, Face Recognition, Biometrik, Canberra Distance

Screening for physical inactivity among adults: the value of distance walked in the six-minute walk test. A cross-sectional diagnostic study.

Science.gov (United States)

Sperandio, Evandro Fornias; Arantes, Rodolfo Leite; da Silva, Rodrigo Pereira; Matheus, Agatha Caveda; Lauria, Vinícius Tonon; Bianchim, Mayara Silveira; Romiti, Marcello; Gagliardi, Antônio Ricardo de Toledo; Dourado, Victor Zuniga

2016-01-01

Accelerometry provides objective measurement of physical activity levels, but is unfeasible in clinical practice. Thus, we aimed to identify physical fitness tests capable of predicting physical inactivity among adults. Diagnostic test study developed at a university laboratory and a diagnostic clinic. 188 asymptomatic subjects underwent assessment of physical activity levels through accelerometry, ergospirometry on treadmill, body composition from bioelectrical impedance, isokinetic muscle function, postural balance on a force platform and six-minute walk test. We conducted descriptive analysis and multiple logistic regression including age, sex, oxygen uptake, body fat, center of pressure, quadriceps peak torque, distance covered in six-minute walk test and steps/day in the model, as predictors of physical inactivity. We also determined sensitivity (S), specificity (Sp) and area under the curve of the main predictors by means of receiver operating characteristic curves. The prevalence of physical inactivity was 14%. The mean number of steps/day (≤ 5357) was the best predictor of physical inactivity (S = 99%; Sp = 82%). The best physical fitness test was a distance in the six-minute walk test and ≤ 96% of predicted values (S = 70%; Sp = 80%). Body fat > 25% was also significant (S = 83%; Sp = 51%). After logistic regression, steps/day and distance in the six-minute walk test remained predictors of physical inactivity. The six-minute walk test should be included in epidemiological studies as a simple and cheap tool for screening for physical inactivity.

Working safely with radioactive materials

International Nuclear Information System (INIS)

Davies, Wynne

1993-01-01

In common with exposure to many other laboratory chemicals, exposure to ionising radiations and to radioactive materials carries a small risk of causing harm. Because of this, there are legal limits to the amount of exposure to ionising radiations at work and special rules for working with radioactive materials. Although radiation protection is a complex subject it is possible to simplify to 10 basic things you should do -the Golden Rules. They are: 1) understand the nature of the hazard and get practical training; 2) plan ahead to minimise time spent handling radioactivity; 3) distance yourself appropriately from sources of radiation; 4) use appropriate shielding for the radiation; 5) contain radioactive materials in defined work areas; 6) wear appropriate protective clothing and dosimeters; 7) monitor the work area frequently for contamination control; 8) follow the local rules and safe ways of working; 9) minimise accumulation of waste and dispose of it by appropriate routes, and 10) after completion of work, monitor, wash, and monitor yourself again. These rules are expanded in this article. (author)

Safe havens in Europe

DEFF Research Database (Denmark)

Paldam, Martin

2013-01-01

Eleven safe havens exist in Europe providing offshore banking and low taxes. Ten of these states are very small while Switzerland is moderately small. All 11 countries are richer than their large neighbors. It is shown that causality is from small to safe haven to wealth, and that theoretically...... equilibriums are likely to exist where a certain regulation is substantially lower in a small country than in its big neighbor. This generates a large capital inflow to the safe havens. The pool of funds that may reach the safe havens is shown to be huge. It is far in excess of the absorptive capacity...... of the safe havens, but it still explains, why they are rich. Microstates offer a veil of anonymity to funds passing through, and Switzerland offers safe storage of funds....

Is linear distance measured by panoramic radiography reliable?

International Nuclear Information System (INIS)

Nishikawa, Keiichi; Wakoh, Mamoru; Sano, Tsukasa; Suehiro, Atsushi; Sekine, Hideshi; Kousuge, Yuuji

2010-01-01

The objective of this study was to re-examine the reliability of distance measurements on clinical panoramic radiographs by comparing them with computed tomography (CT) images, from which the most accurate distance measurement is possible. Twenty pairs of images from patients examined both with panoramic radiography and CT for dental implant treatment planning in the premolar and molar regions of the mandible were used. The vertical linear distance between the alveolar crest and the closest mandibular canal was measured by three experienced oral radiologists on both images. The distances measured on panoramic radiographs were corrected for the magnification factor at the focal plane. Double-oblique cross-sectional images were used for CT. Pearson's correlation coefficient was calculated between distances obtained from both images. The paired t test was performed for statistical comparison. Error levels with the panoramic radiograph versus the CT image were also calculated. Pearson's correlation coefficient showed a significant strong linear correlation (R=0.90; p<0.01). However, the corrected value of distance measured on panoramic radiographs tended to be too small, and a significant difference was observed (p<0.05). The error level was approximately 10% (9.6±7.3%). Distance measurement on clinical panoramic radiographs is less reliable than CT images and cannot be recommended. (author)

Traveling Safely with Medicines

Science.gov (United States)

... Medications Safely My Medicine List How to Administer Traveling Safely with Medicines Planes, trains, cars – even boats ... your trip, ask your pharmacist about how to travel safely with your medicines. Make sure that you ...

Genomic signal processing methods for computation of alignment-free distances from DNA sequences.

Science.gov (United States)

Borrayo, Ernesto; Mendizabal-Ruiz, E Gerardo; Vélez-Pérez, Hugo; Romo-Vázquez, Rebeca; Mendizabal, Adriana P; Morales, J Alejandro

2014-01-01

Genomic signal processing (GSP) refers to the use of digital signal processing (DSP) tools for analyzing genomic data such as DNA sequences. A possible application of GSP that has not been fully explored is the computation of the distance between a pair of sequences. In this work we present GAFD, a novel GSP alignment-free distance computation method. We introduce a DNA sequence-to-signal mapping function based on the employment of doublet values, which increases the number of possible amplitude values for the generated signal. Additionally, we explore the use of three DSP distance metrics as descriptors for categorizing DNA signal fragments. Our results indicate the feasibility of employing GAFD for computing sequence distances and the use of descriptors for characterizing DNA fragments.

The Normal Value of Tibial Tubercle Trochlear Groove Distance in Patients With Normal Knee Examinations Using MRI

Directory of Open Access Journals (Sweden)

Mohammad Sobhanardekani

2017-10-01

Full Text Available Patellar instability is a multifactorial common knee pathology that has a high recurrence rate, and the symptoms continue and ultimately predispose the patient to chondromalacia and osteoarthritis. Tibial tuberosity-trochlear groove distance (TTTG is very important in the assessment of patellofemoral joint instability. The purpose of this study was to report the normal value of TTTG in males and females in different age groups and to assess the reliability of MRI in measuring TTTG. All patients presenting with knee pain and normal examinations of the knee joint, with a normal MRI report, referring to Shahid Sadoughi hospital of Yazd, Iran, from April 2014 to September 2014, were included in the study. MR images were studied once by two radiologists and for the second time by one radiologist. Mean value of TTTG was reported for males and females and in three age groups. Intra- and inter-observer reliability was calculated. A total of 98 patients were eligible to evaluate during 6 months (68 male and 30 female. Mean TTTG was 10.9±2.5 mm in total, which was 10.8±2.8 mm and 11.3±2.3 mm in males and females, respectively (P>0.05. Mean TTTG in males ≤30 years, 30-50 years and, ≥51-year-old were 10.8±2.6 mm, 10.8±2.7 mm, and 10.8±2.6 mm, respectively; that was 12.1±3.4 mm, 11.4±1.9 mm, and 10.5±1.7 mm in females ≤30 years, 31-50 years and, ≥51-year-old, respectively (95% CI. The coefficient of variation was <10% for both intra- and interobserver analysis. The results of the present study showed no significant difference in TTTG value between males and females in different age groups. In addition, it demonstrated that MRI is a reliable method in assessment of TTTG and identified normal value for TTTG at 10.9±2.5 mm.

The Near-IR TRGB Magnitude and Distance Modulus to NGC 185

Directory of Open Access Journals (Sweden)

Y.-J. Sohn

2008-09-01

Full Text Available We determined values of distance modulus to nearby dwarf galaxy NGC 185 from the Tip of Red-Giant Branch (TRGB method. Apparent magnitudes of the TRGB are estimated from the near-infrared JHK luminosity functions (LFs of the resolved giant branch stars. Theoretical absolute magnitudes of the TRGB in near-infrared bands have been extracted from the Yonsei-Yale isochrones. The observed apparent and theoretical absolute magnitudes of the TRGB provide values of distance modulus to NGC 185 as (m - M.

The social distance theory of power.

Science.gov (United States)

Magee, Joe C; Smith, Pamela K

2013-05-01

We propose that asymmetric dependence between individuals (i.e., power) produces asymmetric social distance, with high-power individuals feeling more distant than low-power individuals. From this insight, we articulate predictions about how power affects (a) social comparison, (b) susceptibility to influence, (c) mental state inference and responsiveness, and (d) emotions. We then explain how high-power individuals' greater experienced social distance leads them to engage in more abstract mental representation. This mediating process of construal level generates predictions about how power affects (a) goal selection and pursuit, (b) attention to desirability and feasibility concerns, (c) subjective certainty, (d) value-behavior correspondence, (e) self-control, and (f) person perception. We also reassess the approach/inhibition theory of power, noting limitations both in what it can predict and in the evidence directly supporting its proposed mechanisms. Finally, we discuss moderators and methodological recommendations for the study of power from a social distance perspective.

Encyclopedia of distances

CERN Document Server

Deza, Michel Marie

2016-01-01

This 4th edition of the leading reference volume on distance metrics is characterized by updated and rewritten sections on some items suggested by experts and readers, as well a general streamlining of content and the addition of essential new topics. Though the structure remains unchanged, the new edition also explores recent advances in the use of distances and metrics for e.g. generalized distances, probability theory, graph theory, coding theory, data analysis. New topics in the purely mathematical sections include e.g. the Vitanyi multiset-metric, algebraic point-conic distance, triangular ratio metric, Rossi-Hamming metric, Taneja distance, spectral semimetric between graphs, channel metrization, and Maryland bridge distance. The multidisciplinary sections have also been supplemented with new topics, including: dynamic time wrapping distance, memory distance, allometry, atmospheric depth, elliptic orbit distance, VLBI distance measurements, the astronomical system of units, and walkability distance. Lea...

Land value as a function of distance from the CBD: The case of the eastern suburbs of Pretoria

Directory of Open Access Journals (Sweden)

AC Jordaan

2004-04-01

Full Text Available The greater the benefit derived from using a piece of land for any particular purpose the higher the price the prospective user is willing to pay.  The demand for land is thus a reflection of the utility derived from its use by current or potential users.  The ability to compete for sites depends on whether they have the means to benefit from accessibility and complementarity within the urban framework. Conventional theory states that productivity determines urban rent, which is the highest at the place of maximum accessibility, i.e. the central business district (CBD. This paper review selected residential location theories and the factors influencing location decisions. Using selected eastern suburbs of Pretoria, the paper tries to determine whether residential land values decrease as distance from the CBD increase as theory suggests.Foreign aid and poverty reduction in sub-Saharan Africa: A cross-country investigation

Distance Learning

National Research Council Canada - National Science Library

Braddock, Joseph

1997-01-01

A study reviewing the existing Army Distance Learning Plan (ADLP) and current Distance Learning practices, with a focus on the Army's training and educational challenges and the benefits of applying Distance Learning techniques...

Are personal values of importance in the stigmatization of people with mental illness?

Science.gov (United States)

Norman, Ross Mg; Sorrentino, Richard; Windell, Deborah; Manchanda, Rahul

2008-12-01

To investigate the relation of responses to the Schwartz Value Scale to preferred social distance to a person with either schizophrenia or depression. The influence of personal value priorities on discrimination has been investigated in several contexts, but seldom with reference to social distance towards those with mental illness. University students (n = 200) completed the Schwartz Value Scale, as well as a measure of beliefs about mental illness and preferred social distance with reference to a vignette describing a person with either schizophrenia or depression. Consistent with past findings, respondents indicated a preference for greater social distance for schizophrenia than depression, and beliefs about likelihood of socially inappropriate behaviour and danger were correlated with social distance. Self-transcendence value orientation was a significant independent predictor of preference for less social distance. These findings were not influenced by a social desirability bias. Value orientation makes a significant contribution to the prediction of social distance towards those with mental illness. Evaluation of value-based interventions to reduce such discrimination appears warranted.

The interuncal distance in elderly patients with dementia; MRI study

Energy Technology Data Exchange (ETDEWEB)

Hanyu, Haruo; Takasaki, Masaru [Tokyo Medical Coll. (Japan); Sugiyama, Takeshi; Abe, Shinei; Kobayashi, Yasutaka; Maehata, Yukihiko; Katsunuma, Hidetaka

1993-09-01

The interuncal distance between the unci of the temporal lobes was measured from axial MR images of the brain in elderly patients with dementia including dementia of the Alzheimer type (DAT), vascular dementia (VD), and others. The measured value of the interuncal distance completely separated patients with DAT from normal controls, and there was significant diference in the interuncal distance between patients with DAT and VD. This measurement is a practical method of assessing hippocampal atrophy and appears to be a useful adjunct in the clinical diagnosis of DAT. (author).

REPRESENTATIONS OF DISTANCE: DIFFERENCES IN UNDERSTANDING DISTANCE ACCORDING TO TRAVEL METHOD

Directory of Open Access Journals (Sweden)

Gunvor Riber Larsen

2017-12-01

Full Text Available This paper explores how Danish tourists represent distance in relation to their holiday mobility and how these representations of distance are a result of being aero-mobile as opposed to being land-mobile. Based on interviews with Danish tourists, whose holiday mobility ranges from the European continent to global destinations, the first part of this qualitative study identifies three categories of representations of distance that show how distance is being ‘translated’ by the tourists into non-geometric forms: distance as resources, distance as accessibility, and distance as knowledge. The representations of distance articulated by the Danish tourists show that distance is often not viewed in ‘just’ kilometres. Rather, it is understood in forms that express how transcending the physical distance through holiday mobility is dependent on individual social and economic contexts, and on whether the journey was undertaken by air or land. The analysis also shows that being aeromobile is the holiday transportation mode that removes the tourists the furthest away from physical distance, resulting in the distance travelled by air being represented in ways that have the least correlation, in the tourists’ minds, with physical distance measured in kilometres.

Distance Based Method for Outlier Detection of Body Sensor Networks

Directory of Open Access Journals (Sweden)

Haibin Zhang

2016-01-01

Full Text Available We propose a distance based method for the outlier detection of body sensor networks. Firstly, we use a Kernel Density Estimation (KDE to calculate the probability of the distance to k nearest neighbors for diagnosed data. If the probability is less than a threshold, and the distance of this data to its left and right neighbors is greater than a pre-defined value, the diagnosed data is decided as an outlier. Further, we formalize a sliding window based method to improve the outlier detection performance. Finally, to estimate the KDE by training sensor readings with errors, we introduce a Hidden Markov Model (HMM based method to estimate the most probable ground truth values which have the maximum probability to produce the training data. Simulation results show that the proposed method possesses a good detection accuracy with a low false alarm rate.

Distance of the image plane from metal surfaces

International Nuclear Information System (INIS)

Smith, N.V.; Chen, C.T.; Weinert, M.

1989-01-01

The data base of surface-state energies on the metals Cu, Ag, Au, Ni, Pd, and Pt is assembled and, with the aid of a simple model, is used to estimate the distance of the image plane and its trends from surface to surface and metal to metal. The model combines a nearly-free-electron representation of the crystal with a Jones-Jennings-Jepsen ansatz for the saturated image barrier. The projected bulk-band gaps are taken from published determinations. Constraints are placed on the surface barrier parameters by appeal to the results of self-consistent first-principles slab calculations. The general experimental trend observed is for the image-plane distance z 0 to decrease in the sequence (111) to (001) to (110), in the same sense but not as rapidly as z J , the distance of the effective jellium edge. This trend is rationalized using a simple model of the tail of the surface charge density. Typical values for z 0 -z J fall in the range -0.2 to +0.5 a.u., with the larger values occurring for the 3d metals Cu and Ni

Time-Distance Helioseismology: Noise Estimation

Science.gov (United States)

Gizon, L.; Birch, A. C.

2004-10-01

As in global helioseismology, the dominant source of noise in time-distance helioseismology measurements is realization noise due to the stochastic nature of the excitation mechanism of solar oscillations. Characterizing noise is important for the interpretation and inversion of time-distance measurements. In this paper we introduce a robust definition of travel time that can be applied to very noisy data. We then derive a simple model for the full covariance matrix of the travel-time measurements. This model depends only on the expectation value of the filtered power spectrum and assumes that solar oscillations are stationary and homogeneous on the solar surface. The validity of the model is confirmed through comparison with SOHO MDI measurements in a quiet-Sun region. We show that the correlation length of the noise in the travel times is about half the dominant wavelength of the filtered power spectrum. We also show that the signal-to-noise ratio in quiet-Sun travel-time maps increases roughly as the square root of the observation time and is at maximum for a distance near half the length scale of supergranulation.

Screening for physical inactivity among adults: the value of distance walked in the six-minute walk test. A cross-sectional diagnostic study

Directory of Open Access Journals (Sweden)

Evandro Fornias Sperandio

Full Text Available ABSTRACT: CONTEXT AND OBJECTIVES: Accelerometry provides objective measurement of physical activity levels, but is unfeasible in clinical practice. Thus, we aimed to identify physical fitness tests capable of predicting physical inactivity among adults. DESIGN AND SETTING: Diagnostic test study developed at a university laboratory and a diagnostic clinic. METHODS: 188 asymptomatic subjects underwent assessment of physical activity levels through accelerometry, ergospirometry on treadmill, body composition from bioelectrical impedance, isokinetic muscle function, postural balance on a force platform and six-minute walk test. We conducted descriptive analysis and multiple logistic regression including age, sex, oxygen uptake, body fat, center of pressure, quadriceps peak torque, distance covered in six-minute walk test and steps/day in the model, as predictors of physical inactivity. We also determined sensitivity (S, specificity (Sp and area under the curve of the main predictors by means of receiver operating characteristic curves. RESULTS: The prevalence of physical inactivity was 14%. The mean number of steps/day (≤ 5357 was the best predictor of physical inactivity (S = 99%; Sp = 82%. The best physical fitness test was a distance in the six-minute walk test and ≤ 96% of predicted values (S = 70%; Sp = 80%. Body fat > 25% was also significant (S = 83%; Sp = 51%. After logistic regression, steps/day and distance in the six-minute walk test remained predictors of physical inactivity. CONCLUSION: The six-minute walk test should be included in epidemiological studies as a simple and cheap tool for screening for physical inactivity.

Keeping you at arm's length: modifying peripersonal space influences interpersonal distance.

Science.gov (United States)

Quesque, F; Ruggiero, G; Mouta, S; Santos, J; Iachini, T; Coello, Y

2017-07-01

Peripersonal space represents the area around the body where objects are coded in motor terms for the purpose of voluntary goal-directed actions. Previous studies have suggested that peripersonal space is also a safe space linked with our private area, influencing interpersonal space in social contexts. However, whether these two spaces rely on similar embodied processes remains an open issue. In the present study, participants observed a point-light walker (PLW) approaching them from different directions and passing near them at different distances from their right or left shoulder. While approaching, the PLW disappeared at a distance of 2 m and the task for the participants was to estimate if the interpersonal distance, at the time the PLW would have reached their level, was comfortable or not. Between two sessions of comfort judgments, the participants manipulated a 70 cm tool entailing an extension of peripersonal space, or a 10 cm tool entailing no extension of peripersonal space. The results revealed that the comfortable interpersonal distance was larger when the PLW crossed the mid-sagittal plane of the participants than when it approached them laterally, with a concomitant increase of response time. After participants manipulated the long tool, comfortable interpersonal distance increased, but predominantly when the PLW trajectory implied crossing the participants' mid-sagittal plane. This effect was not observed when participants manipulated the short tool. Two control tasks showed that using the long tool modified the reachability (control 1), but not the time to passage (control 2) estimates of PLW stimuli, suggesting that tool use extended peripersonal space without changing perceived visual distances. Overall, the data show that comfortable interpersonal distance is linked to the representation of peripersonal space. As a consequence, increasing peripersonal space through tool use has the immediate consequence that comfortable interpersonal distance

Catharsis – Philosophical and Spiritual Aspects of Long-Distance Running

Directory of Open Access Journals (Sweden)

Nemec Marcel

2016-05-01

Full Text Available The purpose of the study was to identify and analyze the occurrence of cathartic states in a sample of long-distance runners. Data collected via questionnaires were used to evaluate quantitative variables complemented by heuristics while aiming at qualitatively categorize the areas of cathartic states in the context of philosophical and spiritual aspects of long-distance running. The study findings objectify philosophical and spiritual aspects affecting personalities of long-distance runners. The study findings have shown that catharsis represents a relevant philosophical and spiritual aspect affecting long-distance running. We assume that authentic experience of catharsis and its effects motivates runners to perform regular physical activity. The analysis of philosophical and spiritual aspects of long-distance running has revealed a multi-spectral holistic relevance based on the transfer affecting a specific way of life, spectrum of values, ethical personality traits, and also the quality of long-distance runners’ lives.

Mean platelet volume (MPV) predicts middle distance running performance.

Science.gov (United States)

Lippi, Giuseppe; Salvagno, Gian Luca; Danese, Elisa; Skafidas, Spyros; Tarperi, Cantor; Guidi, Gian Cesare; Schena, Federico

2014-01-01

Running economy and performance in middle distance running depend on several physiological factors, which include anthropometric variables, functional characteristics, training volume and intensity. Since little information is available about hematological predictors of middle distance running time, we investigated whether some hematological parameters may be associated with middle distance running performance in a large sample of recreational runners. The study population consisted in 43 amateur runners (15 females, 28 males; median age 47 years), who successfully concluded a 21.1 km half-marathon at 75-85% of their maximal aerobic power (VO2max). Whole blood was collected 10 min before the run started and immediately thereafter, and hematological testing was completed within 2 hours after sample collection. The values of lymphocytes and eosinophils exhibited a significant decrease compared to pre-run values, whereas those of mean corpuscular volume (MCV), platelets, mean platelet volume (MPV), white blood cells (WBCs), neutrophils and monocytes were significantly increased after the run. In univariate analysis, significant associations with running time were found for pre-run values of hematocrit, hemoglobin, mean corpuscular hemoglobin (MCH), red blood cell distribution width (RDW), MPV, reticulocyte hemoglobin concentration (RetCHR), and post-run values of MCH, RDW, MPV, monocytes and RetCHR. In multivariate analysis, in which running time was entered as dependent variable whereas age, sex, blood lactate, body mass index, VO2max, mean training regimen and the hematological parameters significantly associated with running performance in univariate analysis were entered as independent variables, only MPV values before and after the trial remained significantly associated with running time. After adjustment for platelet count, the MPV value before the run (p = 0.042), but not thereafter (p = 0.247), remained significantly associated with running

Mean platelet volume (MPV predicts middle distance running performance.

Directory of Open Access Journals (Sweden)

Giuseppe Lippi

Full Text Available Running economy and performance in middle distance running depend on several physiological factors, which include anthropometric variables, functional characteristics, training volume and intensity. Since little information is available about hematological predictors of middle distance running time, we investigated whether some hematological parameters may be associated with middle distance running performance in a large sample of recreational runners.The study population consisted in 43 amateur runners (15 females, 28 males; median age 47 years, who successfully concluded a 21.1 km half-marathon at 75-85% of their maximal aerobic power (VO2max. Whole blood was collected 10 min before the run started and immediately thereafter, and hematological testing was completed within 2 hours after sample collection.The values of lymphocytes and eosinophils exhibited a significant decrease compared to pre-run values, whereas those of mean corpuscular volume (MCV, platelets, mean platelet volume (MPV, white blood cells (WBCs, neutrophils and monocytes were significantly increased after the run. In univariate analysis, significant associations with running time were found for pre-run values of hematocrit, hemoglobin, mean corpuscular hemoglobin (MCH, red blood cell distribution width (RDW, MPV, reticulocyte hemoglobin concentration (RetCHR, and post-run values of MCH, RDW, MPV, monocytes and RetCHR. In multivariate analysis, in which running time was entered as dependent variable whereas age, sex, blood lactate, body mass index, VO2max, mean training regimen and the hematological parameters significantly associated with running performance in univariate analysis were entered as independent variables, only MPV values before and after the trial remained significantly associated with running time. After adjustment for platelet count, the MPV value before the run (p = 0.042, but not thereafter (p = 0.247, remained significantly associated with running

Genome BLAST distance phylogenies inferred from whole plastid and whole mitochondrion genome sequences

Directory of Open Access Journals (Sweden)

Holland Barbara R

2006-07-01

Full Text Available Abstract Background Phylogenetic methods which do not rely on multiple sequence alignments are important tools in inferring trees directly from completely sequenced genomes. Here, we extend the recently described Genome BLAST Distance Phylogeny (GBDP strategy to compute phylogenetic trees from all completely sequenced plastid genomes currently available and from a selection of mitochondrial genomes representing the major eukaryotic lineages. BLASTN, TBLASTX, or combinations of both are used to locate high-scoring segment pairs (HSPs between two sequences from which pairwise similarities and distances are computed in different ways resulting in a total of 96 GBDP variants. The suitability of these distance formulae for phylogeny reconstruction is directly estimated by computing a recently described measure of "treelikeness", the so-called δ value, from the respective distance matrices. Additionally, we compare the trees inferred from these matrices using UPGMA, NJ, BIONJ, FastME, or STC, respectively, with the NCBI taxonomy tree of the taxa under study. Results Our results indicate that, at this taxonomic level, plastid genomes are much more valuable for inferring phylogenies than are mitochondrial genomes, and that distances based on breakpoints are of little use. Distances based on the proportion of "matched" HSP length to average genome length were best for tree estimation. Additionally we found that using TBLASTX instead of BLASTN and, particularly, combining TBLASTX and BLASTN leads to a small but significant increase in accuracy. Other factors do not significantly affect the phylogenetic outcome. The BIONJ algorithm results in phylogenies most in accordance with the current NCBI taxonomy, with NJ and FastME performing insignificantly worse, and STC performing as well if applied to high quality distance matrices. δ values are found to be a reliable predictor of phylogenetic accuracy. Conclusion Using the most treelike distance matrices, as

Encyclopedia of distances

CERN Document Server

Deza, Michel Marie

2014-01-01

This updated and revised third edition of the leading reference volume on distance metrics includes new items from very active research areas in the use of distances and metrics such as geometry, graph theory, probability theory and analysis. Among the new topics included are, for example, polyhedral metric space, nearness matrix problems, distances between belief assignments, distance-related animal settings, diamond-cutting distances, natural units of length, Heidegger’s de-severance distance, and brain distances. The publication of this volume coincides with intensifying research efforts into metric spaces and especially distance design for applications. Accurate metrics have become a crucial goal in computational biology, image analysis, speech recognition and information retrieval. Leaving aside the practical questions that arise during the selection of a ‘good’ distance function, this work focuses on providing the research community with an invaluable comprehensive listing of the main available di...

Investigation of Reliabilities of Bolt Distances for Bolted Structural Steel Connections by Monte Carlo Simulation Method

Directory of Open Access Journals (Sweden)

Ertekin Öztekin Öztekin

2015-12-01

Full Text Available Design of the distance of bolts to each other and design of the distance of bolts to the edge of connection plates are made based on minimum and maximum boundary values proposed by structural codes. In this study, reliabilities of those distances were investigated. For this purpose, loading types, bolt types and plate thicknesses were taken as variable parameters. Monte Carlo Simulation (MCS method was used in the reliability computations performed for all combination of those parameters. At the end of study, all reliability index values for all those distances were presented in graphics and tables. Results obtained from this study compared with the values proposed by some structural codes and finally some evaluations were made about those comparisons. Finally, It was emphasized in the end of study that, it would be incorrect of the usage of the same bolt distances in the both traditional designs and the higher reliability level designs.

Linear extrapolation distance for a black cylindrical control rod with the pulsed neutron method

International Nuclear Information System (INIS)

Loewenhielm, G.

1978-03-01

The objective of this experiment was to measure the linear extrapolation distance for a central black cylindrical control rod in a cylindrical water moderator. The radius for both the control rod and the moderator was varied. The pulsed neutron technique was used and the decay constant was measured for both a homogeneous and a heterogeneous system. From the difference in the decay constants the extrapolation distance could be calculated. The conclusion is that within experimental error it is safe to use the approximate formula given by Pellaud or the more exact one given by Kavenoky. We can also conclude that linear anisotropic scattering is accounted for in a correct way in the approximate formula given by Pellaud and Prinja and Williams

Portfolio Selection Based on Distance between Fuzzy Variables

Directory of Open Access Journals (Sweden)

Weiyi Qian

2014-01-01

Full Text Available This paper researches portfolio selection problem in fuzzy environment. We introduce a new simple method in which the distance between fuzzy variables is used to measure the divergence of fuzzy investment return from a prior one. Firstly, two new mathematical models are proposed by expressing divergence as distance, investment return as expected value, and risk as variance and semivariance, respectively. Secondly, the crisp forms of the new models are also provided for different types of fuzzy variables. Finally, several numerical examples are given to illustrate the effectiveness of the proposed approach.

SAFE Newsletter

OpenAIRE

2013-01-01

The Center of Excellence SAFE – “Sustainable Architecture for Finance in Europe” – is a cooperation of the Center for Financial Studies and Goethe University Frankfurt. It is funded by the LOEWE initiative of the State of Hessen (Landes-Offensive zur Entwicklung wissenschaftlich-ökonomischer Exzellenz). SAFE brings together more than 40 professors and just as many junior researchers who are all dedicated to conducting research in support of a sustainable financial architecture. The Center has...

Interface Simulation Distances

Directory of Open Access Journals (Sweden)

Pavol Černý

2012-10-01

Full Text Available The classical (boolean notion of refinement for behavioral interfaces of system components is the alternating refinement preorder. In this paper, we define a distance for interfaces, called interface simulation distance. It makes the alternating refinement preorder quantitative by, intuitively, tolerating errors (while counting them in the alternating simulation game. We show that the interface simulation distance satisfies the triangle inequality, that the distance between two interfaces does not increase under parallel composition with a third interface, and that the distance between two interfaces can be bounded from above and below by distances between abstractions of the two interfaces. We illustrate the framework, and the properties of the distances under composition of interfaces, with two case studies.

Foraging flight distances of wintering ducks and geese: a review

Directory of Open Access Journals (Sweden)

William P. Johnson

2014-12-01

Full Text Available The distance covered by foraging animals, especially those that radiate from a central area when foraging, may affect ecosystem, community, and population dynamics, and has conservation and landscape planning implications for multiple taxa, including migratory waterfowl. Migrating and wintering waterfowl make regular foraging flights between roosting and feeding areas that can greatly impact energetic resources within the foraging zone near roost sites. We reviewed published studies and gray literature for one-way foraging flight distances (FFDs of migrating and wintering dabbling ducks and geese. Thirty reviewed studies reported FFDs and several reported values for multiple species or locations. We obtained FFD values for migration (n = 7 and winter (n = 70. We evaluated the effects of body mass, guild, i.e., dabbling duck or goose, and location, i.e., Nearctic or Palearctic, on FFDs. We used the second-order Akaike's Information Criterion for model selection. We found support for effects of location and guild on FFDs. FFDs of waterfowl wintering in the Nearctic (7.4 ± 6.7 km, mean ± SD; n = 39 values were longer than in the Palearctic (4.2 ± 3.2 km; n = 31 values. The FFDs of geese (7.8 ± 7.2 km, mean ± SD; n = 24 values were longer than FFDs of dabbling ducks (5.1 ± 4.4 km, mean ± SD; n = 46 values. We found mixed evidence that distance flown from the roost changed, i.e., increased or decreased, seasonally. Our results can be used to refine estimates of energetic carrying capacity around roosts and in biological and landscape planning efforts.

Pairwise Comparison and Distance Measure of Hesitant Fuzzy Linguistic Term Sets

Directory of Open Access Journals (Sweden)

Han-Chen Huang

2014-01-01

Full Text Available A hesitant fuzzy linguistic term set (HFLTS, allowing experts using several possible linguistic terms to assess a qualitative linguistic variable, is very useful to express people’s hesitancy in practical decision-making problems. Up to now, a little research has been done on the comparison and distance measure of HFLTSs. In this paper, we present a comparison method for HFLTSs based on pairwise comparisons of each linguistic term in the two HFLTSs. Then, a distance measure method based on the pairwise comparison matrix of HFLTSs is proposed, and we prove that this distance is equal to the distance of the average values of HFLTSs, which makes the distance measure much more simple. Finally, the pairwise comparison and distance measure methods are utilized to develop two multicriteria decision-making approaches under hesitant fuzzy linguistic environments. The results analysis shows that our methods in this paper are more reasonable.

Genetic distance estimates and variable factors distinguishing between goat Kacang, Muara and Samosir

Science.gov (United States)

Hamdan; Saputra, H.; Mirwandhono, E.; Hasnudi; Sembiring, I.; Umar, S.; Ginting, N.; Alwiyah

2018-02-01

The purpose of this research was to look the genetic distance and factors distinguishing variable betwen types of goats in North Sumatera. This research have been conducted in PayaBakung, Hamparan Perak and Klambir Lima village, Deli Serdang district, Batu Binumbun, Aritonang, HutaGinjang village, Muarasubdistrict, North Tapanuli district and ParbabaDolok, Siopat Sosor, Sinabulan village, Ronggur Nihuta Pangururan village, Sitonggi-tonggi village in the subdistrict RonggurNihuta, Samosir district of the month of July 2016. The data was analyzed using descriptive, discriminants, canonical, Principal Component Analysis, Distance genetic and Tree Phylogenetic. The result showed that the nearest genetic distance goat found in Kacang and Samosir (1.973), and the farthest genetic distnace find in Samosir and Muara (8.671). The variables made it difference was goat race Base Rim Horn (0.856) and Long Horn (0.878). Genetic distance values most far between Muaragoat with Samosir goat was (8.671). The conclude that the crossing superior result, must be cross between two goat types with value genetics most distance. It will have a better chance heterosis in cross result.

Safe and reliable solutions for Internet application in power sector

International Nuclear Information System (INIS)

Eichelburg, W. K.

2004-01-01

The requirements for communication of various information systems (control systems, EMS, ERP) continually increase. Internet is prevailingly a Universal communication device for interconnection of the distant systems at the present. However, the communication with the outside world is important, the internal system must be protected safely and reliably. The goal of the article is to inform the experienced participants with the verified solutions of the safe and reliable Internet utilization for interconnection of control systems on the superior level, the distant management, the diagnostic and for interconnection of information systems. An added value is represented by the solutions using Internet for image and sound transmission. (author)

The effect of plyometric training on power and kicking distance in female adolescent soccer players.

Science.gov (United States)

Rubley, Mack D; Haase, Amaris C; Holcomb, William R; Girouard, Tedd J; Tandy, Richard D

2011-01-01

The purpose of this study was to measure the effects of low-frequency, low-impact plyometric training on vertical jump (VJ) and kicking distance in female adolescent soccer players. Sixteen adolescent soccer players were studied (age 13.4 ± 0.5 years) across 14 weeks. The control group (general soccer training only) had 6 subjects, and the plyometric training (general soccer training plus plyometric exercise) group had 10 subjects. All subjects were tested for VJ and kicking distance on 3 occasions: pre-test, 7 weeks, and 14 weeks. Data were analyzed using a 2 (Training) × 3 (Test) analysis of variance (ANOVA) with repeated measures on the factor test. No significant difference in kicking distance was found between groups at pre-test (p = 0.688) or 7 weeks (p = 0.117). The plyometric group had significantly greater kicking distance after 14 weeks (p plyometric group had a significantly higher VJ after 14 weeks (p = 0.014). These results provide strength coaches with a safe and effective alternative to high-intensity plyometric training. Based on these findings, to increase lower-body power resulting in increased VJ and kicking distance, strength coaches should implement once-weekly, low-impact plyometric training programs with their adolescent athletes.

Generally Recognized as Safe: Uncertainty Surrounding E-Cigarette Flavoring Safety

Directory of Open Access Journals (Sweden)

Clara G. Sears

2017-10-01

Full Text Available Despite scientific uncertainty regarding the relative safety of inhaling e-cigarette aerosol and flavorings, some consumers regard the U.S. Food and Drug Administration’s “generally recognized as safe” (GRAS designation as evidence of flavoring safety. In this study, we assessed how college students’ perceptions of e-cigarette flavoring safety are related to understanding of the GRAS designation. During spring 2017, an online questionnaire was administered to college students. Chi-square p-values and multivariable logistic regression were employed to compare perceptions among participants considering e-cigarette flavorings as safe and those considering e-cigarette flavorings to be unsafe. The total sample size was 567 participants. Only 22% knew that GRAS designation meant that a product is safe to ingest, not inhale, inject, or use topically. Of participants who considered flavorings to be GRAS, the majority recognized that the designation meant a product is safe to ingest but also considered it safe to inhale. Although scientific uncertainty on the overall safety of flavorings in e-cigarettes remains, health messaging can educate the public about the GRAS designation and its irrelevance to e-cigarette safety.

The Cognition of Maximal Reach Distance in Parkinson’s Disease

Directory of Open Access Journals (Sweden)

Satoru Otsuki

2016-01-01

Full Text Available This study aimed to investigate whether the cognition of spatial distance in reaching movements was decreased in patients with Parkinson’s disease (PD and whether this cognition was associated with various symptoms of PD. Estimated and actual maximal reaching distances were measured in three directions in PD patients and healthy elderly volunteers. Differences between estimated and actual measurements were compared within each group. In the PD patients, the associations between “error in cognition” of reaching distance and “clinical findings” were also examined. The results showed that no differences were observed in any values regardless of dominance of hand and severity of symptoms. The differences between the estimated and actual measurements were negatively deviated in the PD patients, indicating that they tended to underestimate reaching distance. “Error in cognition” of reaching distance correlated with the items of posture in the motor section of the Unified Parkinson’s Disease Rating Scale. This suggests that, in PD patients, postural deviation and postural instability might affect the cognition of the distance from a target object.

Safe Grid

Science.gov (United States)

Chow, Edward T.; Stewart, Helen; Korsmeyer, David (Technical Monitor)

2003-01-01

The biggest users of GRID technologies came from the science and technology communities. These consist of government, industry and academia (national and international). The NASA GRID is moving into a higher technology readiness level (TRL) today; and as a joint effort among these leaders within government, academia, and industry, the NASA GRID plans to extend availability to enable scientists and engineers across these geographical boundaries collaborate to solve important problems facing the world in the 21 st century. In order to enable NASA programs and missions to use IPG resources for program and mission design, the IPG capabilities needs to be accessible from inside the NASA center networks. However, because different NASA centers maintain different security domains, the GRID penetration across different firewalls is a concern for center security people. This is the reason why some IPG resources are been separated from the NASA center network. Also, because of the center network security and ITAR concerns, the NASA IPG resource owner may not have full control over who can access remotely from outside the NASA center. In order to obtain organizational approval for secured remote access, the IPG infrastructure needs to be adapted to work with the NASA business process. Improvements need to be made before the IPG can be used for NASA program and mission development. The Secured Advanced Federated Environment (SAFE) technology is designed to provide federated security across NASA center and NASA partner's security domains. Instead of one giant center firewall which can be difficult to modify for different GRID applications, the SAFE "micro security domain" provide large number of professionally managed "micro firewalls" that can allow NASA centers to accept remote IPG access without the worry of damaging other center resources. The SAFE policy-driven capability-based federated security mechanism can enable joint organizational and resource owner approved remote

Reducing the distance in distance-caregiving by technology innovation

Directory of Open Access Journals (Sweden)

Lazelle E Benefield

2007-07-01

Full Text Available Lazelle E Benefield1, Cornelia Beck21College of Nursing, University of Oklahoma Health Sciences Center, Oklahoma City, Oklahoma, USA; 2Pat & Willard Walker Family Memory Research Center, University of Arkansas for Medical Sciences, Little Rock, Arkansas, USAAbstract: Family caregivers are responsible for the home care of over 34 million older adults in the United States. For many, the elder family member lives more than an hour’s distance away. Distance caregiving is a growing alternative to more familiar models where: 1 the elder and the family caregiver(s may reside in the same household; or 2 the family caregiver may live nearby but not in the same household as the elder. The distance caregiving model involves elders and their family caregivers who live at some distance, defined as more than a 60-minute commute, from one another. Evidence suggests that distance caregiving is a distinct phenomenon, differs substantially from on-site family caregiving, and requires additional assistance to support the physical, social, and contextual dimensions of the caregiving process. Technology-based assists could virtually connect the caregiver and elder and provide strong support that addresses the elder’s physical, social, cognitive, and/or sensory impairments. Therefore, in today’s era of high technology, it is surprising that so few affordable innovations are being marketed for distance caregiving. This article addresses distance caregiving, proposes the use of technology innovation to support caregiving, and suggests a research agenda to better inform policy decisions related to the unique needs of this situation.Keywords: caregiving, family, distance, technology, elders

Censoring distances based on labeled cortical distance maps in cortical morphometry.

Science.gov (United States)

Ceyhan, Elvan; Nishino, Tomoyuki; Alexopolous, Dimitrios; Todd, Richard D; Botteron, Kelly N; Miller, Michael I; Ratnanather, J Tilak

2013-01-01

It has been demonstrated that shape differences in cortical structures may be manifested in neuropsychiatric disorders. Such morphometric differences can be measured by labeled cortical distance mapping (LCDM) which characterizes the morphometry of the laminar cortical mantle of cortical structures. LCDM data consist of signed/labeled distances of gray matter (GM) voxels with respect to GM/white matter (WM) surface. Volumes and other summary measures for each subject and the pooled distances can help determine the morphometric differences between diagnostic groups, however they do not reveal all the morphometric information contained in LCDM distances. To extract more information from LCDM data, censoring of the pooled distances is introduced for each diagnostic group where the range of LCDM distances is partitioned at a fixed increment size; and at each censoring step, the distances not exceeding the censoring distance are kept. Censored LCDM distances inherit the advantages of the pooled distances but also provide information about the location of morphometric differences which cannot be obtained from the pooled distances. However, at each step, the censored distances aggregate, which might confound the results. The influence of data aggregation is investigated with an extensive Monte Carlo simulation analysis and it is demonstrated that this influence is negligible. As an illustrative example, GM of ventral medial prefrontal cortices (VMPFCs) of subjects with major depressive disorder (MDD), subjects at high risk (HR) of MDD, and healthy control (Ctrl) subjects are used. A significant reduction in laminar thickness of the VMPFC in MDD and HR subjects is observed compared to Ctrl subjects. Moreover, the GM LCDM distances (i.e., locations with respect to the GM/WM surface) for which these differences start to occur are determined. The methodology is also applicable to LCDM-based morphometric measures of other cortical structures affected by disease.

Censoring Distances Based on Labeled Cortical Distance Maps in Cortical Morphometry

Directory of Open Access Journals (Sweden)

Elvan eCeyhan

2013-10-01

Full Text Available It has been demonstrated that shape differences are manifested in cortical structures due to neuropsychiatric disorders. Such morphometric differences can be measured by labeled cortical distance mapping (LCDM which characterizes the morphometry of the laminar cortical mantle of cortical structures. LCDM data consist of signed/labeled distances of gray matter (GM voxels with respect to GM/white matter (WM surface. Volumes and other summary measures for each subject and the pooled distances can help determine the morphometric differences between diagnostic groups, however they do not reveal all the morphometric information con-tained in LCDM distances. To extract more information from LCDM data, censoring of the pooled distances is introduced for each diagnostic group where the range of LCDM distances is partitioned at a fixed increment size; and at each censoring step, the distances not exceeding the censoring distance are kept. Censored LCDM distances inherit the advantages of the pooled distances but also provide information about the location of morphometric differences which cannot be obtained from the pooled distances. However, at each step, the censored distances aggregate, which might confound the results. The influence of data aggregation is investigated with an extensive Monte Carlo simulation analysis and it is demonstrated that this influence is negligible. As an illustrative example, GM of ventral medial prefrontal cortices (VMPFCs of subjects with major depressive disorder (MDD, subjects at high risk (HR of MDD, and healthy control (Ctrl subjects are used. A significant reduction in laminar thickness of the VMPFC in MDD and HR subjects is observed compared to Ctrl subjects. Moreover, the GM LCDM distances (i.e., locations with respect to the GM/WM surface for which these differences start to occur are determined. The methodology is also applicable to LCDM-based morphometric measures of other cortical structures affected by disease.

Training for Distance Teaching through Distance Learning.

Science.gov (United States)

Cadorath, Jill; Harris, Simon; Encinas, Fatima

2002-01-01

Describes a mixed-mode bachelor degree course in English language teaching at the Universidad Autonoma de Puebla (Mexico) that was designed to help practicing teachers write appropriate distance education materials by giving them the experience of being distance students. Includes a course outline and results of a course evaluation. (Author/LRW)

Household's willingness to pay for arsenic safe drinking water in Bangladesh.

Science.gov (United States)

Khan, Nasreen Islam; Brouwer, Roy; Yang, Hong

2014-10-01

This study examines willingness to pay (WTP) in Bangladesh for arsenic (As) safe drinking water across different As-risk zones, applying a double bound discrete choice value elicitation approach. The study aims to provide a robust estimate of the benefits of As safe drinking water supply, which is compared to the results from a similar study published almost 10 years ago using a single bound estimation procedure. Tests show that the double bound valuation design does not suffer from anchoring or incentive incompatibility effects. Health risk awareness levels are high and households are willing to pay on average about 5 percent of their disposable average annual household income for As safe drinking water. Important factors influencing WTP include the bid amount to construct communal deep tubewell for As safe water supply, the risk zone where respondents live, household income, water consumption, awareness of water source contamination, whether household members are affected by As contamination, and whether they already take mitigation measures. Copyright © 2014 Elsevier Ltd. All rights reserved.

Tourists consuming distance

DEFF Research Database (Denmark)

Larsen, Gunvor Riber

The environmental impact of tourism mobility is linked to the distances travelled in order to reach a holiday destination, and with tourists travelling more and further than previously, an understanding of how the tourists view the distance they travel across becomes relevant. Based on interviews...... contribute to an understanding of how it is possible to change tourism travel behaviour towards becoming more sustainable. How tourists 'consume distance' is discussed, from the practical level of actually driving the car or sitting in the air plane, to the symbolic consumption of distance that occurs when...... travelling on holiday becomes part of a lifestyle and a social positioning game. Further, different types of tourist distance consumers are identified, ranging from the reluctant to the deliberate and nonchalant distance consumers, who display very differing attitudes towards the distance they all travel...

Analytic processing of distance.

Science.gov (United States)

Dopkins, Stephen; Galyer, Darin

2018-01-01

How does a human observer extract from the distance between two frontal points the component corresponding to an axis of a rectangular reference frame? To find out we had participants classify pairs of small circles, varying on the horizontal and vertical axes of a computer screen, in terms of the horizontal distance between them. A response signal controlled response time. The error rate depended on the irrelevant vertical as well as the relevant horizontal distance between the test circles with the relevant distance effect being larger than the irrelevant distance effect. The results implied that the horizontal distance between the test circles was imperfectly extracted from the overall distance between them. The results supported an account, derived from the Exemplar Based Random Walk model (Nosofsky & Palmieri, 1997), under which distance classification is based on the overall distance between the test circles, with relevant distance being extracted from overall distance to the extent that the relevant and irrelevant axes are differentially weighted so as to reduce the contribution of irrelevant distance to overall distance. The results did not support an account, derived from the General Recognition Theory (Ashby & Maddox, 1994), under which distance classification is based on the relevant distance between the test circles, with the irrelevant distance effect arising because a test circle's perceived location on the relevant axis depends on its location on the irrelevant axis, and with relevant distance being extracted from overall distance to the extent that this dependency is absent. Copyright © 2017 Elsevier B.V. All rights reserved.

Correlation measure to detect time series distances, whence economy globalization

Science.gov (United States)

Miśkiewicz, Janusz; Ausloos, Marcel

2008-11-01

An instantaneous time series distance is defined through the equal time correlation coefficient. The idea is applied to the Gross Domestic Product (GDP) yearly increments of 21 rich countries between 1950 and 2005 in order to test the process of economic globalisation. Some data discussion is first presented to decide what (EKS, GK, or derived) GDP series should be studied. Distances are then calculated from the correlation coefficient values between pairs of series. The role of time averaging of the distances over finite size windows is discussed. Three network structures are next constructed based on the hierarchy of distances. It is shown that the mean distance between the most developed countries on several networks actually decreases in time, -which we consider as a proof of globalization. An empirical law is found for the evolution after 1990, similar to that found in flux creep. The optimal observation time window size is found ≃15 years.

Teamwork orientation and personal learning: The role of individual cultural values and value congruence

Directory of Open Access Journals (Sweden)

Ghulam Mustafa

2017-11-01

Full Text Available Orientation: There is a growing body of research that indicates that personal factors such as collectivist value orientation play an important role in individuals’ preference for teamwork, and an individual’s propensity to work in a team is seen as a contributing factor in one’s personal learning. Research purpose: The purpose of this article is twofold. Firstly, the article aims to explore whether individual-level cultural values of power distance, uncertainty avoidance and masculinity–femininity interact with individual collectivist values to influence teamwork orientation. Secondly, the study aims to examine the influence of teamwork orientation on personal learning further exploring the role of perceived value congruence in this relationship. Motivation for the study: While an extensive amount of research has been conducted on teamwork orientation, the question of how individual cultural values influence formation of teamwork orientation is still largely unanswered. This lack is especially evident with regard to how the influence of collectivism on the development of positive attitudes towards teamwork is promoted or inhibited by other values such as power distance, uncertainty avoidance and masculinity–femininity. Moreover, the current evidence about the influence of teamwork orientation on personal learning and the role of personal and contextual factors in such a relationship is still scarce. Research design, approach and method: The study used a cross-sectional survey, with data collected from 120 business students engaged in project teams at a Norwegian university. All the hypothesised relationships were assessed using partial least square structural equation modelling technique. Main findings: The findings indicate that the link between collectivism–teamwork orientation is stronger for team members who scored high on uncertainty avoidance values and the relationship was weaker for team members who endorsed high

Theoretical analysis of a wind heating conversion and long distance transmission system

International Nuclear Information System (INIS)

Cheng, Wen-Long; Han, Bing-Chuan; Nian, Yong-Le; Han, Bing-Bing

2017-01-01

Highlights: • A novel long distance wind power heating system was proposed. • Heat losses could be reduced effectively due to latent heat transmission. • Power consumption and cost would drop greatly compared to hot water convey system. • The maximum transmission distance is 10 times that of conventional system. - Abstract: As a clean and renewable energy, wind power gets a rapid growth in recent years. With the increasing proportion of wind power generation, the fluctuation and intermittency of wind energy impedes the safe and stable operation of national power grids, which causes wind curtailment and energy waste, hindering further development of wind power industry in China. To solve this problem, wind heating conversion was proposed. However, long distance transmission between wind fields and residential areas for thermal energy is an urgent issue for wind heating. This paper presents a novel wind heating conversion and long distance transmission system. A simple device was utilized for wind heating conversion in the present system, then thermal energy was transported to heat demand site through latent heat transmission of the working fluids. A model of the novel system was built and thermodynamics analysis showed that maximum transmission distance of the novel system could extended to 240 km, 9.6 times of that of typical hot water transmission system. And the novel system also could cut down the cost by greatly reducing pump work and pipe diameter. In addition, efficiency and circulation ratio was almost unchanged while wind power density increased from 350 W/m 2 to 650 W/m 2 .

Distancing, not embracing, the Distancing-Embracing model of art reception.

Science.gov (United States)

Davies, Stephen

2017-01-01

Despite denials in the target article, the Distancing-Embracing model appeals to compensatory ideas in explaining the appeal of artworks that elicit negative affect. The model also appeals to the deflationary effects of psychological distancing. Having pointed to the famous rejection in the 1960s of the view that aesthetic experience involves psychological distancing, I suggest that "distance" functions here as a weak metaphor that cannot sustain the explanatory burden the theory demands of it.

Foundations of Distance Education. Third Edition. Routledge Studies in Distance Education.

Science.gov (United States)

Keegan, Desmond

This text gives an overview of distance education for students, administrators, and practitioners in distance education. Chapter 1 discusses the study of distance education. Chapter 2 analyzes forms of nonconventional education (open, nontraditional) that may have similarities to distance education but are not to be identified with it. Chapter 3…

modelling distances

Directory of Open Access Journals (Sweden)

Robert F. Love

2001-01-01

Full Text Available Distance predicting functions may be used in a variety of applications for estimating travel distances between points. To evaluate the accuracy of a distance predicting function and to determine its parameters, a goodness-of-fit criteria is employed. AD (Absolute Deviations, SD (Squared Deviations and NAD (Normalized Absolute Deviations are the three criteria that are mostly employed in practice. In the literature some assumptions have been made about the properties of each criterion. In this paper, we present statistical analyses performed to compare the three criteria from different perspectives. For this purpose, we employ the ℓkpθ-norm as the distance predicting function, and statistically compare the three criteria by using normalized absolute prediction error distributions in seventeen geographical regions. We find that there exist no significant differences between the criteria. However, since the criterion SD has desirable properties in terms of distance modelling procedures, we suggest its use in practice.

[Selection of distance thresholds of urban forest landscape connectivity in Shenyang City].

Science.gov (United States)

Liu, Chang-fu; Zhou, Bin; He, Xing-yuan; Chen, Wei

2010-10-01

By using the QuickBird remote sensing image interpretation data of urban forests in Shenyang City in 2006, and with the help of geographical information system, this paper analyzed the landscape patches of the urban forests in the area inside the third ring-road of Shenyang. Based on the habitat availability and the dispersal potential of animal and plant species, 8 distance thresholds (50, 100, 200, 400, 600, 800, 1000, and 1200 m) were selected to compute the integral index of connectivity, probability of connectivity, and important value of the landscape patches, and the computed values were used for analyzing and screening the distance thresholds of urban forest landscape connectivity in the City. The results showed that the appropriate distance thresholds of the urban forest landscape connectivity in Shenyang City in 2006 ranged from 100 to 400 m, with 200 m being most appropriate. It was suggested that the distance thresholds should be increased or decreased according to the performability of urban forest landscape connectivity and the different demands for landscape levels.

Anatomy-Based navigation for ventriculostomy: Nasion-coronal suture distance measurement

Directory of Open Access Journals (Sweden)

Mevci Özdemir

2014-09-01

Full Text Available Objective: In this study we aimed to determine a landmark that can be measured through the skin with nasal mid-point (bregma to coronal suture, and additionally an average value was calculated. We report, to our knowledge, the distance between the nasion-coronal sutures is reported for the first time in Turkish population. Methods: The study included 30 craniums and 30 frontal bones. Each skull from midline nasal suture to coronal suture curved up at the distance was measured with tape measure. Results: Mean values were determined. Nasal suture between coronal suture distance average 12,2 cm (min10,3 cm, up to 13,5 cm were detected. Conclusion: Nasal suture is an easily palpable area through the skin. A small incision is carried down through skin to bone at the spot 12 cm back from the nasion 3 cm lateral to the midline for ventricular drainage operation. This data provide practical information for neurosurgeon and is available everywhere. J Clin Exp Invest 2014; 5 (3: 368-370

Distance relay performance in future converter dominated power systems

DEFF Research Database (Denmark)

Sarkar, Moumita; Jia, Jundi; Yang, Guangya

2017-01-01

Increasing penetration of converter-based generations in power system has led to new system challenges. Short circuit power response from converter-based generations is different from that of traditional synchronous generators. Power electronic converters can be designed for over-current only up ...... of converter controls on fault current response of converter-based generations is also investigated. Index Terms—Converter control, distance relays, power system protection, system modelling....... to 1.1-1.25 times of its nominal value. Low availability of short circuit power can cause many challenges such as misoperation of distance relays. The aim of this paper is to investigate the effect of converter dominated systems on performance of distance relays. Backup functionality of the distance...... relay is major concern as miscoordination of backup relays in case of cascading faults can lead to severe stress in system, which can develop into blackout. In this paper, response of relays in traditional system is compared with response of relays in low short-circuit-current power systems. Impact...

The critical distance in laser-induced plasmas: an operative definition

International Nuclear Information System (INIS)

Side, D. Delle; Giuffreda, E.; Nassisi, V.

2016-01-01

We propose a method to estimate a precise value for the critical distance L cr after which three-body recombination stops to produce charge losses in an expanding laser-induced plasma. We show in particular that the total charge collected has a ''reversed sigmoid'' shape as a function of the target-to-detector distance. Fitting the total charge data with a logistic related function, we could consider as L cr the intercept of the tangent to this curve in its inflection point. Furthermore, this value scales well with theoretical predictions. From the application point of view, this could be of great practical interest, since it provide a reliable way to precisely determine the geometry of the extraction system in Laser Ion Sources.

The critical distance in laser-induced plasmas: an operative definition

Science.gov (United States)

Delle Side, D.; Giuffreda, E.; Nassisi, V.

2016-05-01

We propose a method to estimate a precise value for the critical distance Lcr after which three-body recombination stops to produce charge losses in an expanding laser-induced plasma. We show in particular that the total charge collected has a ``reversed sigmoid'' shape as a function of the target-to-detector distance. Fitting the total charge data with a logistic related function, we could consider as Lcr the intercept of the tangent to this curve in its inflection point. Furthermore, this value scales well with theoretical predictions. From the application point of view, this could be of great practical interest, since it provide a reliable way to precisely determine the geometry of the extraction system in Laser Ion Sources.

Brownian distance covariance

OpenAIRE

Székely, Gábor J.; Rizzo, Maria L.

2010-01-01

Distance correlation is a new class of multivariate dependence coefficients applicable to random vectors of arbitrary and not necessarily equal dimension. Distance covariance and distance correlation are analogous to product-moment covariance and correlation, but generalize and extend these classical bivariate measures of dependence. Distance correlation characterizes independence: it is zero if and only if the random vectors are independent. The notion of covariance with...

Traversing psychological distance.

Science.gov (United States)

Liberman, Nira; Trope, Yaacov

2014-07-01

Traversing psychological distance involves going beyond direct experience, and includes planning, perspective taking, and contemplating counterfactuals. Consistent with this view, temporal, spatial, and social distances as well as hypotheticality are associated, affect each other, and are inferred from one another. Moreover, traversing all distances involves the use of abstraction, which we define as forming a belief about the substitutability for a specific purpose of subjectively distinct objects. Indeed, across many instances of both abstraction and psychological distancing, more abstract constructs are used for more distal objects. Here, we describe the implications of this relation for prediction, choice, communication, negotiation, and self-control. We ask whether traversing distance is a general mental ability and whether distance should replace expectancy in expected-utility theories. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Euclidean distance degree of an algebraic variety

NARCIS (Netherlands)

Draisma, J.; Horobet, E.; Ottaviani, G.; Sturmfels, B.; Thomas, R.R.

2013-01-01

The nearest point map of a real algebraic variety with respect to Euclidean distance is an algebraic function. For instance, for varieties of low rank matrices, the Eckart-Young Theorem states that this map is given by the singular value decomposition. This article develops a theory of such nearest

The Euclidean distance degree of an algebraic variety

NARCIS (Netherlands)

Draisma, J.; Horobet, E.; Ottaviani, G.; Sturmfels, B.; Thomas, R.R.

The nearest point map of a real algebraic variety with respect to Euclidean distance is an algebraic function. For instance, for varieties of low-rank matrices, the Eckart–Young Theorem states that this map is given by the singular value decomposition. This article develops a theory of such nearest

Distance between two binding sites of the same antibody molecule

International Nuclear Information System (INIS)

Cser, L.; Gladkikh, I.A.; Ostanevich, Y.M.; Franek, F.; Novotny, J.; Nezlin, R.S.

1978-01-01

Neutron small-angle scattering experiments are reported, aimed at determining the distance between the two binding sites of the same antibody molecule employing complexes of anti-Dnp antibody with an antigenically univalent, high molecular weight ligand. Although the distance values could be determined only with a large statistical error, the data allowed the conclusion that the geometrical parameters of the complexes formed with the early (i.e., precipitating) antibody are significantly different from those of the complexes formed with the late (i.e, non-precipitating) antibody. The data suggest that the precipitating antibody complexed with a high molecular weight antigen assumes an extended shape with an antigen to antigen distance of 35.8 +- 1.3 nm. (Auth.)

Nitrogen Abundances and the Distance Moduli of the Pleiades and Hyades

OpenAIRE

Miller, Blake; King, Jeremy R.; Chen, Yu; Boesgaard, Ann M.

2013-01-01

Recent reanalyses of HIPPARCOS parallax data confirm a previously noted discrepancy with the Pleiades distance modulus estimated from main-sequence fitting in the color-magnitude diagram. One proposed explanation of this distance modulus discrepancy is a Pleiades He abundance that is significantly larger than the Hyades value. We suggest that, based on our theoretical and observational understanding of Galactic chemical evolution, nitrogen abundances may serve as a proxy for helium abundances...

Distance matrix-based approach to protein structure prediction.

Science.gov (United States)

Kloczkowski, Andrzej; Jernigan, Robert L; Wu, Zhijun; Song, Guang; Yang, Lei; Kolinski, Andrzej; Pokarowski, Piotr

2009-03-01

Much structural information is encoded in the internal distances; a distance matrix-based approach can be used to predict protein structure and dynamics, and for structural refinement. Our approach is based on the square distance matrix D = [r(ij)(2)] containing all square distances between residues in proteins. This distance matrix contains more information than the contact matrix C, that has elements of either 0 or 1 depending on whether the distance r (ij) is greater or less than a cutoff value r (cutoff). We have performed spectral decomposition of the distance matrices D = sigma lambda(k)V(k)V(kT), in terms of eigenvalues lambda kappa and the corresponding eigenvectors v kappa and found that it contains at most five nonzero terms. A dominant eigenvector is proportional to r (2)--the square distance of points from the center of mass, with the next three being the principal components of the system of points. By predicting r (2) from the sequence we can approximate a distance matrix of a protein with an expected RMSD value of about 7.3 A, and by combining it with the prediction of the first principal component we can improve this approximation to 4.0 A. We can also explain the role of hydrophobic interactions for the protein structure, because r is highly correlated with the hydrophobic profile of the sequence. Moreover, r is highly correlated with several sequence profiles which are useful in protein structure prediction, such as contact number, the residue-wise contact order (RWCO) or mean square fluctuations (i.e. crystallographic temperature factors). We have also shown that the next three components are related to spatial directionality of the secondary structure elements, and they may be also predicted from the sequence, improving overall structure prediction. We have also shown that the large number of available HIV-1 protease structures provides a remarkable sampling of conformations, which can be viewed as direct structural information about the

Effects of Coupling Distance on Synchronization and Coherence in Chaotic Neural Networks

International Nuclear Information System (INIS)

Wang Maosheng

2009-01-01

Effects of coupling distance on synchronization and coherence of chaotic neurons in complex networks are numerically investigated. We find that it is not beneficial to neurons synchronization if confining the coupling distance of random edges to a limit d max , but help to improve their coherence. Moreover, there is an optimal value of d max at which the coherence is maximum.

Distance to VY Canis Majoris with VERA

Science.gov (United States)

Choi, Yoon Kyung; Hirota, Tomoya; Honma, Mareki; Kobayashi, Hideyuki; Bushimata, Takeshi; Imai, Hiroshi; Iwadate, Kenzaburo; Jike, Takaaki; Kameno, Seiji; Kameya, Osamu; Kamohara, Ryuichi; Kan-Ya, Yukitoshi; Kawaguchi, Noriyuki; Kijima, Masachika; Kim, Mi Kyoung; Kuji, Seisuke; Kurayama, Tomoharu; Manabe, Seiji; Maruyama, Kenta; Matsui, Makoto; Matsumoto, Naoko; Miyaji, Takeshi; Nagayama, Takumi; Nakagawa, Akiharu; Nakamura, Kayoko; Oh, Chung Sik; Omodaka, Toshihiro; Oyama, Tomoaki; Sakai, Satoshi; Sasao, Tetsuo; Sato, Katsuhisa; Sato, Mayumi; Shibata, Katsunori M.; Tamura, Yoshiaki; Tsushima, Miyuki; Yamashita, Kazuyoshi

2008-10-01

We report on astrometric observations of H2O masers around the red supergiant VY Canis Majoris carried out with VLBI Exploration of Radio Astrometry (VERA). Based on astrometric monitoring for 13 months, we successfully measured a trigonometric parallax of 0.88±0.08 mas, corresponding to a distance of 1.14+0.11-0.09kpc. This is the most accurate determined distance to VY CMa and the first one based on an annual parallax measurement. The luminosity of VY CMa has been overestimated due to a previously accepted distance. With our result, we re-estimated the luminosity of VY CMa to be (3±0.5) × 105Lodot using the bolometric flux integrated over optical and IR wavelengths. This improved luminosity value makes the location of VY CMa on the Hertzsprung-Russell (HR) diagram much closer to the theoretically allowable zone (i.e. the left side of the Hayashi track) than previous ones, though the uncertainty in the effective temperature of the stellar surface still does not permit us to make a final conclusion.

Analytical Model for Passing Sight Distance Design Criteria of Two-Lane Roads in Sri Lanka

Directory of Open Access Journals (Sweden)

Mampearachchi W. K.

2018-03-01

Full Text Available For a safe overtaking manoeuvre on two-lane highways, drivers need a sufficient sight distance along the roadway, but it depends on the traffic environment. To provide an adequate Passing Sight Distance (PSD, a number of models have been proposed since the initial model introduced by American Association of State Highways and Transport Officials (AASHTO in 1954. It is a current design practice in Sri Lanka as well, however, not validated for local traffic conditions. This paper will present an alternative PSD model and an evaluation of AASHTO model for national highway design. Experiment was based on GPS data collection. In conclusion, PSD demand was satisfied by AASHTO PSD under mix traffic conditions, but not the safety concerns for speeds greater than 80 km/h, while alternative model successful for all speeds.

Principal distance constraint error diffusion algorithm for homogeneous dot distribution

Science.gov (United States)

Kang, Ki-Min; Kim, Choon-Woo

1999-12-01

The perceived quality of the halftoned image strongly depends on the spatial distribution of the binary dots. Various error diffusion algorithms have been proposed for realizing the homogeneous dot distribution in the highlight and shadow regions. However, they are computationally expensive and/or require large memory space. This paper presents a new threshold modulated error diffusion algorithm for the homogeneous dot distribution. The proposed method is applied exactly same as the Floyd-Steinberg's algorithm except the thresholding process. The threshold value is modulated based on the difference between the distance to the nearest minor pixel, `minor pixel distance', and the principal distance. To do so, calculation of the minor pixel distance is needed for every pixel. But, it is quite time consuming and requires large memory resources. In order to alleviate this problem, `the minor pixel offset array' that transforms the 2D history of minor pixels into the 1D codes is proposed. The proposed algorithm drastically reduces the computational load and memory spaces needed for calculation of the minor pixel distance.

Are Detox Diets Safe?

Science.gov (United States)

... Safe Videos for Educators Search English Español Are Detox Diets Safe? KidsHealth / For Teens / Are Detox Diets ... seguras las dietas de desintoxicación? What Is a Detox Diet? The name sounds reassuring — everyone knows that ...

Open and Distance Learning Today. Routledge Studies in Distance Education Series.

Science.gov (United States)

Lockwood, Fred, Ed.

This book contains the following papers on open and distance learning today: "Preface" (Daniel); "Big Bang Theory in Distance Education" (Hawkridge); "Practical Agenda for Theorists of Distance Education" (Perraton); "Trends, Directions and Needs: A View from Developing Countries" (Koul); "American…

Astrophysical tests of modified gravity: Constraints from distance indicators in the nearby universe

Energy Technology Data Exchange (ETDEWEB)

Jain, Bhuvnesh; Vikram, Vinu [Department of Physics and Astronomy, University of Pennsylvania, Philadelphia, PA 19104 (United States); Sakstein, Jeremy [Department of Applied Mathematics and Theoretical Physics, Cambridge CB3 0WA (United Kingdom)

2013-12-10

We use distance measurements in the nearby universe to carry out new tests of gravity, surpassing other astrophysical tests by over two orders of magnitude for chameleon theories. The three nearby distance indicators—cepheids, tip of the red giant branch (TRGB) stars, and water masers—operate in gravitational fields of widely different strengths. This enables tests of scalar-tensor gravity theories because they are screened from enhanced forces to different extents. Inferred distances from cepheids and TRGB stars are altered (in opposite directions) over a range of chameleon gravity theory parameters well below the sensitivity of cosmological probes. Using published data, we have compared cepheid and TRGB distances in a sample of unscreened dwarf galaxies within 10 Mpc. We use a comparable set of screened galaxies as a control sample. We find no evidence for the order unity force enhancements expected in these theories. Using a two-parameter description of the models (the coupling strength and background field value), we obtain constraints on both the chameleon and symmetron screening scenarios. In particular we show that f(R) models with background field values f {sub R0} above 5 × 10{sup –7} are ruled out at the 95% confidence level. We also compare TRGB and maser distances to the galaxy NGC 4258 as a second test for larger field values. While there are several approximations and caveats in our study, our analysis demonstrates the power of gravity tests in the local universe. We discuss the prospects for additional improved tests with future observations.

Astrophysical tests of modified gravity: Constraints from distance indicators in the nearby universe

International Nuclear Information System (INIS)

Jain, Bhuvnesh; Vikram, Vinu; Sakstein, Jeremy

2013-01-01

We use distance measurements in the nearby universe to carry out new tests of gravity, surpassing other astrophysical tests by over two orders of magnitude for chameleon theories. The three nearby distance indicators—cepheids, tip of the red giant branch (TRGB) stars, and water masers—operate in gravitational fields of widely different strengths. This enables tests of scalar-tensor gravity theories because they are screened from enhanced forces to different extents. Inferred distances from cepheids and TRGB stars are altered (in opposite directions) over a range of chameleon gravity theory parameters well below the sensitivity of cosmological probes. Using published data, we have compared cepheid and TRGB distances in a sample of unscreened dwarf galaxies within 10 Mpc. We use a comparable set of screened galaxies as a control sample. We find no evidence for the order unity force enhancements expected in these theories. Using a two-parameter description of the models (the coupling strength and background field value), we obtain constraints on both the chameleon and symmetron screening scenarios. In particular we show that f(R) models with background field values f R0 above 5 × 10 –7 are ruled out at the 95% confidence level. We also compare TRGB and maser distances to the galaxy NGC 4258 as a second test for larger field values. While there are several approximations and caveats in our study, our analysis demonstrates the power of gravity tests in the local universe. We discuss the prospects for additional improved tests with future observations.

Safe Anesthesia For Every Tot

DEFF Research Database (Denmark)

Weiss, Markus; Vutskits, Laszlo; Hansen, Tom G

2015-01-01

PURPOSE OF REVIEW: The term 'safe use of anesthesia in children is ill-defined and requires definition of and focus on the 'safe conduct of pediatric anesthesia'. RECENT FINDINGS: The Safe Anesthesia For Every Tot initiative (www.safetots.org) has been set up during the last year to focus...... on the safe conduct of pediatric anesthesia. This initiative aims to provide guidance on markers of quality anesthesia care. The introduction and implementation of national regulations of 'who, where, when and how' are required and will result in an improved perioperative outcome in vulnerable children....... The improvement of teaching, training, education and supervision of the safe conduct of pediatric anesthesia are the main goals of the safetots.org initiative. SUMMARY: This initiative addresses the well known perioperative risks in young children, perioperative causes for cerebral morbidity as well as gaps...

Physical and chemical test results of electrostatic safe flooring materials

Science.gov (United States)

Gompf, R. H.

1988-01-01

This test program was initiated because a need existed at the Kennedy Space Center (KSC) to have this information readily available to the engineer who must make the choice of which electrostatic safe floor to use in a specific application. The information, however, should be of value throughout both the government and private industry in the selection of a floor covering material. Included are the test results of 18 floor covering materials which by test evaluation at KSC are considered electrostatically safe. Tests were done and/or the data compiled in the following areas: electrostatics, flammability, hypergolic compatibility, outgassing, floor type, material thickness, and available colors. Each section contains the test method used to gather the data and the test results.

[The relationship between accommodative accuracy at different near-work distances and early-onset myopia].

Science.gov (United States)

Yu, Q W; Zhang, P; Zhou, S B; Hu, Y; Ji, M X; Luo, Y C; You, H L; Yao, Z X

2016-07-01

To observe the accommodative accuracy of children with early-onset myopia at different near-work distances, and discuss the relationship between accommodative accuracy and early-onset myopia. This was a case-control study. Thirty-seven emmetropic children, 41 early-onset myopic children without correction, and 39 early-onset myopic children with spectacles, aged 7 to 13 years, were included. Measures of refractive errors and accommodative accuracy at four near-work distances, including 50 cm, 40 cm, 30 cm, and 20 cm, were made using the binocular fusion cross cylinder (FCC) of an automatic phoropter. Most candidates showed accommodative lags, including the children with emmetropia. The ratio of lags in all candidates at different near-work distances was 75.21% (50 cm), 87.18% (40 cm), 92.31% (30 cm), and 98.29% (20 cm), respectively. All accommodative accuracies became worse, and the accommodative lag ratio and values of FCC increased, along with the shortening of the distance. The difference in accommodative accuracy among groups was statistically significant at 30 cm (χ(2)=7.852, P= 0.020) and 20 cm (χ(2)=6.480, P=0.039). The values of FCC among groups were significantly different at 30 cm (F=3.626, P=0.030) and 20 cm (F=3.703, P=0.028), but not at 50 cm and 40 cm (P>0.05). In addition, the FCC values of 30 cm and 20 cm had a statistically significant difference between myopic children without correction [(1.25±0.44) D and (1.76±0.43) D] and emmetropic children [(0.95±0.52) D and (1.41±0.58) D] (P=0.012, 0.008). The correlation between diopters of myopia and accommodative accuracy at different nearwork distances was not statistically significant (P>0.05). However, the correlation between diopters of myopia and the accommodative lag value (FCC) at 20 cm was statistically significant (r=0.246, P=0.028). The closer the near-work distance is, the worse the accommodative accuracy is. This is more significant in early-onset myopia, especially myopia without

THE DISTANCE TO NGC 1316 (FORNAX A) FROM OBSERVATIONS OF FOUR TYPE Ia SUPERNOVAE

International Nuclear Information System (INIS)

Stritzinger, Maximilian; Phillips, Mark M.; Boldt, Luis; Campillay, Abdo; Krzeminski, Wojtek; Morrell, Nidia; Salgado, Francisco; Roth, Miguel; Burns, Christopher R.; Persson, Sven E.; Freedman, Wendy L.; Madore, Barry F.; Folatelli, Gaston; Hamuy, Mario; Krisciunas, Kevin; Suntzeff, Nicholas B.; Kattner, ShiAnne; Contreras, Carlos

2010-01-01

The giant elliptical galaxy NGC 1316 (Fornax A) is a well-studied member of the Fornax Cluster and a prolific producer of Type Ia supernovae (SNe Ia), having hosted four observed events since 1980. Here, we present detailed optical- and near-infrared light curves of the spectroscopically normal SN 2006dd. These data are used, along with previously published photometry of the normal SN 1980N and SN 1981D, and the fast-declining, low-luminosity SN 2006mr, to compute independent estimates of the host reddening for each SN, and the distance to NGC 1316. From the three normal SNe, we find a distance of 17.8 ± 0.3 (random) ± 0.3 (systematic) Mpc for H o = 72. Distance moduli derived from the 'EBV' and Tripp methods give the values that are mutually consistent with 4%-8%. Moreover, the weighted means of the distance moduli for these three SNe for three methods agree to within 3%. This consistency is encouraging and supports the premise that Type Ia SNe are reliable distance indicators at the 5% precision level or better. On the other hand, the two methods used to estimate the distance of the fast-declining SN 2006mr both yield a distance to NGC 1316 which is 25%-30% larger. This disparity casts doubt on the suitability of fast-declining events for estimating extragalactic distances. Modest-to-negligible host galaxy reddening values are derived for all four SNe. Nevertheless, two of them (SN 2006dd and SN 2006mr) show strong Na I D interstellar lines in the host galaxy system. The strength of this absorption is completely inconsistent with the small reddening values derived from the SN light curves if the gas in NGC 1316 is typical of that found in the interstellar medium of the Milky Way. In addition, the equivalent width of the Na lines in SN 2006dd appears to have weakened significantly some 100-150 days after explosion.

From a distance: implications of spontaneous self-distancing for adaptive self-reflection.

Science.gov (United States)

Ayduk, Ozlem; Kross, Ethan

2010-05-01

Although recent experimental work indicates that self-distancing facilitates adaptive self-reflection, it remains unclear (a) whether spontaneous self-distancing leads to similar adaptive outcomes, (b) how spontaneous self-distancing relates to avoidance, and (c) how this strategy impacts interpersonal behavior. Three studies examined these issues demonstrating that the more participants spontaneously self-distanced while reflecting on negative memories, the less emotional (Studies 1-3) and cardiovascular (Study 2) reactivity they displayed in the short term. Spontaneous self-distancing was also associated with lower emotional reactivity and intrusive ideation over time (Study 1). The negative association between spontaneous self-distancing and emotional reactivity was mediated by how participants construed their experience (i.e., less recounting relative to reconstruing) rather than avoidance (Studies 1-2). In addition, spontaneous self-distancing was associated with more problem-solving behavior and less reciprocation of negativity during conflicts among couples in ongoing relationships (Study 3). Although spontaneous self-distancing was empirically related to trait rumination, it explained unique variance in predicting key outcomes. 2010 APA, all rights reserved

Relationship between source-surface distance and patient dose in fluoroscopic X-ray examinations

International Nuclear Information System (INIS)

Suzuki, Shoichi; Asada, Yasuki; Nishi, Kazuta; Mizuno, Emiko; Hara, Natsue; Orito, Takeo; Kamei, Tetsuya; Koga, Sukehiko

2000-01-01

The International Electrotechnical Commission, IEC provided in its standard IEC 60601-1-3 (1994) to prevent the use during radioscopic irradiation of focal spot to skin distances less than 20 cm if the X-RAY EQUIPMENT is specified for RADIOSCOPY during surgery or 30 cm for other specified applications. This standard was reflected in the Japanese Industrial Standard JIS Z 4701-1997, which provided the minimum distance from focal spot to skin to be 30 cm for the use of a fluoroscopic and radiographic table (Under-table type). However, JIS had formerly provided the minimum distance to be 40 cm and so does the current Medical Treatment Law. The draft revision for the Medical Treatment Law currently discussed has consideration to adopt the value 30 cm in accordance with the current JIS. Our research intended to investigate the impact on the entrance surface dose for the change of the focal spot to skin distance from 40 cm to 30 cm. The result was 20-30% increase of the entrance surface dose for the focal spot to skin distance 30 cm. Taking patient exposure dose into account, we need further and more sufficient discussion with this result before adopting this value to the Medical Treatment Law. (author)

Distance-regular graphs

NARCIS (Netherlands)

van Dam, Edwin R.; Koolen, Jack H.; Tanaka, Hajime

2016-01-01

This is a survey of distance-regular graphs. We present an introduction to distance-regular graphs for the reader who is unfamiliar with the subject, and then give an overview of some developments in the area of distance-regular graphs since the monograph 'BCN'[Brouwer, A.E., Cohen, A.M., Neumaier,

Numerical distance protection

CERN Document Server

Ziegler, Gerhard

2011-01-01

Distance protection provides the basis for network protection in transmission systems and meshed distribution systems. This book covers the fundamentals of distance protection and the special features of numerical technology. The emphasis is placed on the application of numerical distance relays in distribution and transmission systems.This book is aimed at students and engineers who wish to familiarise themselves with the subject of power system protection, as well as the experienced user, entering the area of numerical distance protection. Furthermore it serves as a reference guide for s

Monetary benefits of preventing childhood lead poisoning with lead-safe window replacement

OpenAIRE

Nevin, Rick; Jacobs, David / E.; Berg, Michael; Cohen, Jonathan

2007-01-01

Previous estimates of childhood lead poisoning prevention benefits have quantified the present value of some health benefits, but not the costs of lead paint hazard control or the benefits associated with housing and energy markets. Because older housing with lead paint constitutes the main exposure source today in the U.S., we quantify health benefits, costs, market value benefits, energy savings, and net economic benefits of lead-safe window replacement (which includes paint stabilization ...

Determination of the longest permissible distance between expansion compensators in gas transmission pipelines

Energy Technology Data Exchange (ETDEWEB)

Huening, R [Fachhochschule Muenster, Burgsteinfurt (Germany, F.R.). Fachbereich Versorgungstechnik

1977-01-01

In order to effectively protect long-distance gas pipelines against mountain damage in the areas in which underground mining is done, expansion compensators must be built in at certain distances. The tests to determine the slippage resistance and the highest permissible distance of expanders Lsub(max) in a transmission line NW 600 having a plastic insulation are described in this work. In addition, a way of calculating the Lsub(max) value from the existing data for pipes of varying diameter and different insulating material is shown.

The safe home project.

Science.gov (United States)

Arphorn, Sara; Jiraniratisai, Sopaphan; Rungtakul, Rungsri; Phutta, Nikom

2011-12-01

The Thai Health Promotion Foundation supported the Improvement of Quality of Life of Informal Workers project in Ban Luang District, Amphur Photaram, Ratchaburi Province. There were many informal workers in Ban Luang District. Sweet-crispy fish producers in Ban Luang were the largest group among the sweet-crispy fish producers in Thailand. This project was aimed at improving living and working conditions of informal workers, with a focus on the sweet-crispy fish group. Good practices of improved living and working conditions were used to help informal workers build safe, healthy and productive work environments. These informal workers often worked in substandard conditions and were exposed to various hazards in the working area. These hazards included risk of exposure to hot work environment, ergonomics-related injuries, chemical hazards, electrical hazards etc. Ergonomics problems were commonly in the sweet-crispy fish group. Unnatural postures such as prolonged sitting were performed dominantly. One hundred and fifty informal workers participated in this project. Occupational health volunteers were selected to encourage occupational health and safety in four groups of informal workers in 2009. The occupational health volunteers trained in 2008 were farmers, beauty salon workers and doll makers. The occupational health and safety knowledge is extended to a new informal worker group: sweet-crispy fish producer, in 2009. The occupational health and safety training for sweet-crispy fish group is conducted by occupational health volunteers. The occupational health volunteers increased their skills and knowledge assist in to make safe home and safe community through participatory oriented training. The improvement of living and working condition is conducted by using a modified WISH, Work Improvement for Safe Home, checklist. The plans of improvement were recorded. The informal workers showed improvement mostly on material handling and storage. The safe uses and safe

Distributed interactive virtual environments for collaborative experiential learning and training independent of distance over Internet2.

Science.gov (United States)

Alverson, Dale C; Saiki, Stanley M; Jacobs, Joshua; Saland, Linda; Keep, Marcus F; Norenberg, Jeffrey; Baker, Rex; Nakatsu, Curtis; Kalishman, Summers; Lindberg, Marlene; Wax, Diane; Mowafi, Moad; Summers, Kenneth L; Holten, James R; Greenfield, John A; Aalseth, Edward; Nickles, David; Sherstyuk, Andrei; Haines, Karen; Caudell, Thomas P

2004-01-01

between Western Australia and UNM. We successfully demonstrated the ability to fully immerse participants in a distributed virtual environment independent of distance for collaborative team interaction in medical simulation designed for education and training. The ability to make mistakes in a safe environment is well received by students and has a positive impact on their understanding, as well as memory of the principles involved in correcting those mistakes. Bringing people together as virtual teams for interactive experiential learning and collaborative training, independent of distance, provides a platform for distributed "just-in-time" training, performance assessment and credentialing. Further validation is necessary to determine the potential value of the distributed VRE in knowledge transfer, improved future performance and should entail training participants to competence in using these tools.

SOCIAL CONSTRUCTIVISM and INTERNATIONAL COOPERATION IN DISTANCE EDUCATION

Directory of Open Access Journals (Sweden)

Elif TOPRAK

2006-07-01

Full Text Available International cooperation in Distance Education which is a very popular phenomenon today can be explained by the rise of social constructivism in social sciences, namely Education and International Relations, for the purpose of this paper. Social constructive approach in International Relations with its emphasis on building social bridges via learning common values and social constructivism in education highlighting learning communities, pave the way for institutionalization of cooperation in Distance Education. Multicultural, multilingual models that adopt educational materials according to local cultures and demands, serve as a good mean of meeting educational needs globally. Information and Communication Technologies ease interactions and lead to a global flow of information, some advantages of which are emphasized in this paper.

The Distance Standard Deviation

OpenAIRE

Edelmann, Dominic; Richards, Donald; Vogel, Daniel

2017-01-01

The distance standard deviation, which arises in distance correlation analysis of multivariate data, is studied as a measure of spread. New representations for the distance standard deviation are obtained in terms of Gini's mean difference and in terms of the moments of spacings of order statistics. Inequalities for the distance variance are derived, proving that the distance standard deviation is bounded above by the classical standard deviation and by Gini's mean difference. Further, it is ...

Distance Education in Turkey

Directory of Open Access Journals (Sweden)

Dr. Nursel Selver RUZGAR,

2004-04-01

Full Text Available Distance Education in Turkey Assistant Professor Dr. Nursel Selver RUZGAR Technical Education Faculty Marmara University, TURKEY ABSTRACT Many countries of the world are using distance education with various ways, by internet, by post and by TV. In this work, development of distance education in Turkey has been presented from the beginning. After discussing types and applications for different levels of distance education in Turkey, the distance education was given in the cultural aspect of the view. Then, in order to create the tendencies and thoughts of graduates of Higher Education Institutions and Distance Education Institutions about being competitors in job markets, sufficiency of education level, advantages for education system, continuing education in different Institutions, a face-to-face survey was applied to 1284 graduates, 958 from Higher Education Institutions and 326 from Distance Education Institutions. The results were evaluated and discussed. In the last part of this work, suggestions to become widespread and improve the distance education in the country were made.

Comparison of pitot traverses taken at varying distances downstream of obstructions.

Science.gov (United States)

Guffey, S E; Booth, D W

1999-01-01

This study determined the deviations between pitot traverses taken under "ideal" conditions--at least seven duct diameter's lengths (i.e., distance = 7D) from obstructions, elbows, junction fittings, and other disturbances to flows--with those taken downstream from commonplace disturbances. Two perpendicular 10-point, log-linear velocity pressure traverses were taken at various distances downstream of tested upstream conditions. Upstream conditions included a plain duct opening, a junction fitting, a single 90 degrees elbow, and two elbows rotated 90 degrees from each other into two orthogonal planes. Airflows determined from those values were compared with the values measured more than 40D downstream of the same obstructions under ideal conditions. The ideal measurements were taken on three traverse diameters in the same plane separated by 120 degrees in honed drawn-over-mandrel tubing. In all cases the pitot tubes were held in place by devices that effectively eliminated alignment errors and insertion depth errors. Duct velocities ranged from 1500 to 4500 ft/min. Results were surprisingly good if one employed two perpendicular traverses. When the averages of two perpendicular traverses was taken, deviations from ideal value were 6% or less even for traverses taken as close as 2D distance from the upstream disturbances. At 3D distance, deviations seldom exceeded 5%. With single diameter traverses, errors seldom exceeded 5% at 6D or more downstream from the disturbance. Interestingly, percentage deviations were about the same at high and low velocities. This study demonstrated that two perpendicular pitot traverses can be taken as close as 3D from these disturbances with acceptable (< or = 5%) deviations from measurements taken under ideal conditions.

Evaluation of laser-induced breakdown spectroscopy analysis potential for addressing radiological threats from a distance

International Nuclear Information System (INIS)

Gaona, I.; Serrano, J.; Moros, J.; Laserna, J.J.

2014-01-01

Although radioactive materials are nowadays valuable tools in nearly all fields of modern science and technology, the dangers stemming from the uncontrolled use of ionizing radiation are more than evident. Since preparedness is a key issue to face the risks of a radiation dispersal event, development of rapid and efficient monitoring technologies to control the contamination caused by radioactive materials is of crucial interest. Laser-induced breakdown spectroscopy (LIBS) exhibits appealing features for this application. This research focuses on the assessment of LIBS potential for the in-situ fingerprinting and identification of radioactive material surrogates from a safe distance. LIBS selectivity and sensitivity to detect a variety of radioactive surrogates, namely 59 Co, 88 Sr, 130 Ba, 133 Cs, 193 Ir and 238 U, on the surface of common urban materials at a distance of 30 m have been evaluated. The performance of the technique for nuclear forensics has been also studied on different model scenarios. Findings have revealed the difficulties to detect and to identify the analytes depending on the surface being interrogated. However, as demonstrated, LIBS shows potential enough for prompt and accurate gathering of essential evidence at a number of sites after the release, either accidental or intentional, of radioactive material. The capability of standoff analysis confers to LIBS unique advantages in terms of fast and safe inspection of forensic scenarios. The identity of the radioactive surrogates is easily assigned from a distance and the sensitivity to their detection is in the range of a few hundreds of ng per square centimeter. - Highlights: • Distant identification of radioactive surrogates on urban surfaces has been proved. • LIBS sensitivity to distant detection of radioactive surrogates has been checked. • Influences of the atmosphere on emission signals have been ascertained. • Usage of standoff LIBS for identifying forensic evidences has been

Evaluation of laser-induced breakdown spectroscopy analysis potential for addressing radiological threats from a distance

Energy Technology Data Exchange (ETDEWEB)

Gaona, I.; Serrano, J.; Moros, J.; Laserna, J.J., E-mail: laserna@uma.es

2014-06-01

Although radioactive materials are nowadays valuable tools in nearly all fields of modern science and technology, the dangers stemming from the uncontrolled use of ionizing radiation are more than evident. Since preparedness is a key issue to face the risks of a radiation dispersal event, development of rapid and efficient monitoring technologies to control the contamination caused by radioactive materials is of crucial interest. Laser-induced breakdown spectroscopy (LIBS) exhibits appealing features for this application. This research focuses on the assessment of LIBS potential for the in-situ fingerprinting and identification of radioactive material surrogates from a safe distance. LIBS selectivity and sensitivity to detect a variety of radioactive surrogates, namely {sup 59}Co, {sup 88}Sr, {sup 130}Ba, {sup 133}Cs, {sup 193}Ir and {sup 238}U, on the surface of common urban materials at a distance of 30 m have been evaluated. The performance of the technique for nuclear forensics has been also studied on different model scenarios. Findings have revealed the difficulties to detect and to identify the analytes depending on the surface being interrogated. However, as demonstrated, LIBS shows potential enough for prompt and accurate gathering of essential evidence at a number of sites after the release, either accidental or intentional, of radioactive material. The capability of standoff analysis confers to LIBS unique advantages in terms of fast and safe inspection of forensic scenarios. The identity of the radioactive surrogates is easily assigned from a distance and the sensitivity to their detection is in the range of a few hundreds of ng per square centimeter. - Highlights: • Distant identification of radioactive surrogates on urban surfaces has been proved. • LIBS sensitivity to distant detection of radioactive surrogates has been checked. • Influences of the atmosphere on emission signals have been ascertained. • Usage of standoff LIBS for identifying

Minimum distance determination between consecutive carriers in the gamma irradiator IR-200 K trajectory

International Nuclear Information System (INIS)

Achmad Suntoro

2014-01-01

A design to determine the minimum distance between the consecutive carriers at the trajectory of gamma irradiators IR-200K is implemented. Equilibrium between centrifugal force of a moving carrier in circular trajectory and its gravity force as well as carrier dimensions are used as parameters in determining such a minimum distance. The minimum distance between the consecutive carriers in the design is defined 1.2 meters. The distance is 11.5% greater than the minimum distance theoretically calculated, namely 1,076 meters. Errors tolerance in construction/installation of the trajectory and other unexpected things during irradiator's operation are part of the consideration to enlarge the minimum distance from its theoretical value. The distance between the consecutive carriers will not affect throughput and efficiency of using radiation due to the straight trajectory segments do not need to follow such the minimum distance between the carriers, as the trajectory segments around the i radiation sources are straight. (author)

THE DIAGNOSTIC-VALUE OF INTERPEDICULATE DISTANCE ASSESSMENT ON PLAIN FILMS IN THORACIC AND LUMBAR SPINE INJURIES

NARCIS (Netherlands)

MARTIJN, A; VELDHUIS, EFM

1991-01-01

In a retrospective study of 107 fractured vertebrae in the thoracic and lumbar spine, the interpediculate distance could be accurately assessed on plain roentgenograms in 96%. When these findings were compared with those of conventional tomography, there were no false-positive or false-negative

SAFE/SNAP application to shipboard security

International Nuclear Information System (INIS)

Grady, L.M.; Walker, J.L.; Polito, J.

1981-11-01

An application of the combined Safeguards Automated Facility Evaluation/Safeguards Network Analysis Procedure (SAFE/SNAP) modeling technique to a physical protection system (PPS) aboard a generic ship is described. This application was performed as an example of how the SAFE and SNAP techniques could be used. Estimates of probability of interruption and neutralization for the example shipboard PPS are provided by SAFE as well as an adversary scenario, which serves as input to SNAP. This adversary scenario is analyzed by SNAP through four cases which incorporate increasingly detailed security force tactics. Comparisons between the results of the SAFE and SNAP analyses are made and conclusions drawn on the validity of each technique. Feedback from SNAP to SAFE is described, and recommendations for upgrading the ship based on the results of the SAFE/SNAP application are also discussed

Measurement of distances between anatomical structures using a translating stage with mounted endoscope

Science.gov (United States)

Kahrs, Lueder A.; Blachon, Gregoire S.; Balachandran, Ramya; Fitzpatrick, J. Michael; Labadie, Robert F.

2012-02-01

During endoscopic procedures it is often desirable to determine the distance between anatomical features. One such clinical application is percutaneous cochlear implantation (PCI), which is a minimally invasive approach to the cochlea via a single, straight drill path and can be achieved accurately using bone-implanted markers and customized microstereotactic frame. During clinical studies to validate PCI, traditional open-field cochlear implant surgery was performed and prior to completion of the surgery, a customized microstereotactic frame designed to achieve the desired PCI trajectory was attached to the bone-implanted markers. To determine whether this trajectory would have safely achieved the target, a sham drill bit is passed through the frame to ensure that the drill bit would reach the cochlea without damaging vital structures. Because of limited access within the facial recess, the distances from the bit to anatomical features could not be measured with calipers. We hypothesized that an endoscope mounted on a sliding stage that translates only along the trajectory, would provide sufficient triangulation to accurately measure these distances. In this paper, the design, fabrication, and testing of such a system is described. The endoscope is mounted so that its optical axis is approximately aligned with the trajectory. Several images are acquired as the stage is moved, and threedimensional reconstruction of selected points allows determination of distances. This concept also has applicability in a large variety of rigid endoscopic interventions including bronchoscopy, laparoscopy, and sinus endoscopy.

Adaptive Value Normalization in the Prefrontal Cortex Is Reduced by Memory Load

Science.gov (United States)

Burke, C. J.; Seifritz, E.; Tobler, P. N.

2017-01-01

Abstract Adaptation facilitates neural representation of a wide range of diverse inputs, including reward values. Adaptive value coding typically relies on contextual information either obtained from the environment or retrieved from and maintained in memory. However, it is unknown whether having to retrieve and maintain context information modulates the brain’s capacity for value adaptation. To address this issue, we measured hemodynamic responses of the prefrontal cortex (PFC) in two studies on risky decision-making. In each trial, healthy human subjects chose between a risky and a safe alternative; half of the participants had to remember the risky alternatives, whereas for the other half they were presented visually. The value of safe alternatives varied across trials. PFC responses adapted to contextual risk information, with steeper coding of safe alternative value in lower-risk contexts. Importantly, this adaptation depended on working memory load, such that response functions relating PFC activity to safe values were steeper with presented versus remembered risk. An independent second study replicated the findings of the first study and showed that similar slope reductions also arose when memory maintenance demands were increased with a secondary working memory task. Formal model comparison showed that a divisive normalization model fitted effects of both risk context and working memory demands on PFC activity better than alternative models of value adaptation, and revealed that reduced suppression of background activity was the critical parameter impairing normalization with increased memory maintenance demand. Our findings suggest that mnemonic processes can constrain normalization of neural value representations. PMID:28462394

Haptic Discrimination of Distance

Science.gov (United States)

van Beek, Femke E.; Bergmann Tiest, Wouter M.; Kappers, Astrid M. L.

2014-01-01

While quite some research has focussed on the accuracy of haptic perception of distance, information on the precision of haptic perception of distance is still scarce, particularly regarding distances perceived by making arm movements. In this study, eight conditions were measured to answer four main questions, which are: what is the influence of reference distance, movement axis, perceptual mode (active or passive) and stimulus type on the precision of this kind of distance perception? A discrimination experiment was performed with twelve participants. The participants were presented with two distances, using either a haptic device or a real stimulus. Participants compared the distances by moving their hand from a start to an end position. They were then asked to judge which of the distances was the longer, from which the discrimination threshold was determined for each participant and condition. The precision was influenced by reference distance. No effect of movement axis was found. The precision was higher for active than for passive movements and it was a bit lower for real stimuli than for rendered stimuli, but it was not affected by adding cutaneous information. Overall, the Weber fraction for the active perception of a distance of 25 or 35 cm was about 11% for all cardinal axes. The recorded position data suggest that participants, in order to be able to judge which distance was the longer, tried to produce similar speed profiles in both movements. This knowledge could be useful in the design of haptic devices. PMID:25116638

Haptic discrimination of distance.

Directory of Open Access Journals (Sweden)

Femke E van Beek

Full Text Available While quite some research has focussed on the accuracy of haptic perception of distance, information on the precision of haptic perception of distance is still scarce, particularly regarding distances perceived by making arm movements. In this study, eight conditions were measured to answer four main questions, which are: what is the influence of reference distance, movement axis, perceptual mode (active or passive and stimulus type on the precision of this kind of distance perception? A discrimination experiment was performed with twelve participants. The participants were presented with two distances, using either a haptic device or a real stimulus. Participants compared the distances by moving their hand from a start to an end position. They were then asked to judge which of the distances was the longer, from which the discrimination threshold was determined for each participant and condition. The precision was influenced by reference distance. No effect of movement axis was found. The precision was higher for active than for passive movements and it was a bit lower for real stimuli than for rendered stimuli, but it was not affected by adding cutaneous information. Overall, the Weber fraction for the active perception of a distance of 25 or 35 cm was about 11% for all cardinal axes. The recorded position data suggest that participants, in order to be able to judge which distance was the longer, tried to produce similar speed profiles in both movements. This knowledge could be useful in the design of haptic devices.

Safe Local Navigation for Visually Impaired Users With a Time-of-Flight and Haptic Feedback Device.

Science.gov (United States)

Katzschmann, Robert K; Araki, Brandon; Rus, Daniela

2018-03-01

This paper presents ALVU (Array of Lidars and Vibrotactile Units), a contactless, intuitive, hands-free, and discreet wearable device that allows visually impaired users to detect low- and high-hanging obstacles, as well as physical boundaries in their immediate environment. The solution allows for safe local navigation in both confined and open spaces by enabling the user to distinguish free space from obstacles. The device presented is composed of two parts: a sensor belt and a haptic strap. The sensor belt is an array of time-of-flight distance sensors worn around the front of a user's waist, and the pulses of infrared light provide reliable and accurate measurements of the distances between the user and surrounding obstacles or surfaces. The haptic strap communicates the measured distances through an array of vibratory motors worn around the user's upper abdomen, providing haptic feedback. The linear vibration motors are combined with a point-loaded pretensioned applicator to transmit isolated vibrations to the user. We validated the device's capability in an extensive user study entailing 162 trials with 12 blind users. Users wearing the device successfully walked through hallways, avoided obstacles, and detected staircases.

Accuracy of a 10 Hz GPS Unit in Measuring Shuttle Velocity Performed at Different Speeds and Distances (5 – 20 M

Directory of Open Access Journals (Sweden)

Beato Marco

2016-12-01

Full Text Available The aim of this study was to validate the accuracy of a 10 Hz GPS device (STATSports, Ireland by comparing the instantaneous values of velocity determined with this device with those determined by kinematic (video analysis (25 Hz. Ten male soccer players were required to perform shuttle runs (with 180° change of direction at three velocities (slow: 2.2 m·s-1; moderate: 3.2 m·s-1; high: maximal over four distances: 5, 10, 15 and 20 m. The experiments were video-recorded; the “point by point” values of speed recorded by the GPS device were manually downloaded and analysed in the same way as the “frame by frame” values of horizontal speed as obtained by video analysis. The obtained results indicated that shuttle distance was smaller in GPS than video analysis (p < 0.01. Shuttle velocity (shuttle distance/shuttle time was thus smaller in GPS than in video analysis (p < 0.001; the percentage difference (bias, % in shuttle velocity between methods was found to decrease with the distance covered (5 m: 9 ± 6%; 20 m: 3 ± 3%. The instantaneous values of speed were averaged; from these data and from data of shuttle time, the distance covered was recalculated; the error (criterion distance-recalculated distance was negligible for video data (0.04 ± 0.28 m whereas GPS data underestimated criterion distance (0.31 ± 0.55 m. In conclusion, the inaccuracy of this GPS unit in determining shuttle speed can be attributed to inaccuracy in determining the shuttle distance.

Bony orbital distances among the Filipino population.

Science.gov (United States)

Barone, Constance M; Jimenez, David F; Laskey, Antoinette; Alcantara, Briccio G; Braddock, Stephen R

2002-03-01

Six hundred and seventy seven radiographs were selected from the logs of films taken in a major hospital in Metro Manila, Philippines over the course of the previous year. Two hundred and eighty-eight female and 389 male, healthy Filipinos between the ages of birth and twenty years were selected based on the availability of a modified Waters' projection and lateral skull film taken at the same time. Measurements for the lateral orbital wall were made at the site of the suture on the medial surface of the zygomatic bone. The medial orbital wall measurement was the distance between the dacrya using a correction factor formula of CF = D-d/D where D is the target film distance and d is the object film distance (1). The actual bony measurements were calculated. The data was gathered and plotted according to sex and in age in years. Graphs were generated using SAS over a graph software. Lines were smooth using cubic spline technique developed by Reinsch with the smoothest value of 75 (2). The mean plus two, four, and six standard deviations were included in each of the curves.

Clustering for high-dimension, low-sample size data using distance vectors

OpenAIRE

Terada, Yoshikazu

2013-01-01

In high-dimension, low-sample size (HDLSS) data, it is not always true that closeness of two objects reflects a hidden cluster structure. We point out the important fact that it is not the closeness, but the "values" of distance that contain information of the cluster structure in high-dimensional space. Based on this fact, we propose an efficient and simple clustering approach, called distance vector clustering, for HDLSS data. Under the assumptions given in the work of Hall et al. (2005), w...

Safe zones and a technical guide for cerclage wiring of the femur: a computed topographic angiogram (CTA) study.

Science.gov (United States)

Apivatthakakul, Theerachai; Siripipattanamongkol, P; Oh, Chang-Wug; Sananpanich, K; Phornphutkul, C

2018-01-01

Cerclage wiring for reduction of complex femoral shaft fractures can create iatrogenic vascular injury. To describe the anatomical relation of blood vessels to the femur and develop a technical guide for safe passage of cerclage wire. CT lower-limb angiographs (CTA) of 80 patients were reviewed and analysed to identify the superficial femoral artery (SFA) and the deep femoral artery (DFA) as well as the relation of those arteries to the femoral cortex. The total length of the femur was measured and divided into eight equal segments (seven levels). At each level, the medial half of the femur was divided into eight sectors labelled A through H and the position of the SFA and DFA was recorded. The shortest distance between the femoral cortex and the SFA and DFA at each level was measured. The data was analysed using STATA version 10.0. The average total femoral length from the tip of greater trochanter to lateral joint line was 402.98 ± 26.16 cm. The average distances from the SFA to the femur (d1) for levels 1 through 7 were 37.20 ± 5.0, 32.09 ± 4.74, 27.13 ± 4.19, 27.71 ± 5.46, 23.71 ± 4.40, 13.63 ± 3.59 and 10.08 ± 3.09 mm, respectively. The average distances between the DFA and the femur (d2) for levels 1 through 3 were 26.70 ± 4.13, 14.76 ± 3.27 and 9.58 ± 3.79 mm, respectively. The position of the SFA is located in sectors B through E at levels 1-3 and in sectors E through H at levels 4-7 and the position of the DFA located in sectors B through F at levels 1-3. Cerclage wiring should be started from the posterior intermuscular septum at the linea aspera. The safe area is the proximal half (midshaft) of the femur where the SFA and DFA lie at a safe distance from the femur. Between the midshaft and the distal 1/4, insertion of the passer must be done meticulously with the tip kept close to posteromedial cortex. Below the distal 1/4, the tip of the passer should be kept close to the posterior cortex to avoid injury to the SFA and

Measurement of kVp, PPV and air kerma values in function of the electric current quantity and the focus-detector distance in one X-ray equipment

International Nuclear Information System (INIS)

Lucena, Rodrigo F. de; Potiens, Maria da Penha A.; Vivolo, Vitor

2009-01-01

The objective of this work was to study the behavior of the X-ray equipment Pantak/Seifert, model MXR-160/22 of the calibration laboratory of IPEN, LCI, operating in the diagnostic radiology radiation quality RQR 5 (70 kV). For this evaluation it was used a noninvasive meter PTW, Diavolt TM model. The measurements of kVp, PPV and Dose (air kerma), were made varying the electric current and distance between the focal point and the meter. This behavior is described in the literature and was expected in the analysis of the measurements for comparison purposes. For the tests where it was only increased the electric current it was waited a linear increase of the dose (air kerma), but not a variation in the kVp and PPV. The measurements had corresponded to the waited behavior, since the Dose (air kerma) measurements presented a linear increase with the increase of the electric current and the kVp and PPV values showed a variation less than 2%. In the corresponding measurements increasing the distance between focal point and meter, it was waited the exponentially decreasing of the Dose (air kerma) and again a small variation or no variation of the PPV and kVP with the increase of the distance. Over again the measurements corresponded to the expected, where the Dose (air kerma) decreased exponentially and the PPV and the kVp had a variation less than 1.5%. (author)

Safe and reliable solutions for Internet application in power sector. SAT automation

International Nuclear Information System (INIS)

Eichelburg, W. K.

2004-01-01

The requirements for communication of various information systems (control systems, EMS, ERP) continually increase. Internet is prevailingly a Universal communication device for interconnection of the distant systems at the present. However, the communication with the outside world is important, the internal system must be protected safely and reliably. The goal of the article is to inform the experienced participants with the verified solutions of the safe and reliable Internet utilization for interconnection of control systems on the superior level, the distant management, the diagnostic and for interconnection of information systems. An added value is represented by the solutions using Internet for image and sound transmission. (author)

The Carnegie-Chicago Hubble Program. I. An Independent Approach to the Extragalactic Distance Scale Using Only Population II Distance Indicators

Science.gov (United States)

Beaton, Rachael L.; Freedman, Wendy L.; Madore, Barry F.; Bono, Giuseppe; Carlson, Erika K.; Clementini, Gisella; Durbin, Meredith J.; Garofalo, Alessia; Hatt, Dylan; Jang, In Sung; Kollmeier, Juna A.; Lee, Myung Gyoon; Monson, Andrew J.; Rich, Jeffrey A.; Scowcroft, Victoria; Seibert, Mark; Sturch, Laura; Yang, Soung-Chul

2016-12-01

We present an overview of the Carnegie-Chicago Hubble Program, an ongoing program to obtain a 3% measurement of the Hubble constant (H 0) using alternative methods to the traditional Cepheid distance scale. We aim to establish a completely independent route to H 0 using RR Lyrae variables, the tip of the red giant branch (TRGB), and Type Ia supernovae (SNe Ia). This alternative distance ladder can be applied to galaxies of any Hubble type, of any inclination, and, using old stars in low-density environments, is robust to the degenerate effects of metallicity and interstellar extinction. Given the relatively small number of SNe Ia host galaxies with independently measured distances, these properties provide a great systematic advantage in the measurement of H 0 via the distance ladder. Initially, the accuracy of our value of H 0 will be set by the five Galactic RR Lyrae calibrators with Hubble Space Telescope Fine-Guidance Sensor parallaxes. With Gaia, both the RR Lyrae zero-point and TRGB method will be independently calibrated, the former with at least an order of magnitude more calibrators and the latter directly through parallax measurement of tip red giants. As the first end-to-end “distance ladder” completely independent of both Cepheid variables and the Large Magellanic Cloud, this path to H 0 will allow for the high-precision comparison at each rung of the traditional distance ladder that is necessary to understand tensions between this and other routes to H 0. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. These observations are associated with programs #13472 and #13691.

The HST Key Project on the Extragalactic Distance Scale

Science.gov (United States)

Freedman, W. L.

1994-12-01

One of the major unresolved problems in observational cosmology is the determination of the Hubble Constant, (H_0). The Hubble Space Telescope (HST) Key Project on the Extragalactic Distance Scale aims to provide a measure of H_0 to an accuracy of 10%. Historically the route to H_0 has been plagued by systematic errors; hence there is no quick and easy route to a believeable value of H_0. Achieving plausible error limits of 10% requires careful attention to eliminating potential sources of systematic error. The strategy adopted by the Key Project team is threefold: First, to discover Cepheids in spiral galaxies located in the field and in small groups that are suitable for the calibration of several independent secondary methods. Second, to make direct Cepheid measurements of 3 spiral galaxies in the Virgo cluster and 2 members of the Fornax cluster. Third, to provide a check on the the Cepheid distance scale via independent distance estimates to nearby galaxies, and in addition, to undertake an empirical test of the sensitivity of the zero point of the Cepheid PL relation to heavy-element abundances. First results from the HST Key Project will be presented. We have now determined Cepheid distances to 4 galaxies using the HST: these are the nearby galaxies M81 and M101, the edge-on galaxy NGC 925, and the face-on spiral galaxy M100 in the Virgo cluster. Recently we have measured a Cepheid distance for M100 of 17 +/- 2 Mpc, which yields a value of H_0 = 80 +/- 17 km/sec/Mpc. This work was carried out in collaboration with the other members of the HST Key Project team, R. Kennicutt, J. Mould, F. Bresolin, S. Faber, L. Ferrarese, H. Ford, J. Graham, J. Gunn, M. Han, P. Harding, J. Hoessel, R. Hill, J. Huchra, S. Hughes, G. Illingworth, D. Kelson, B. Madore, R. Phelps, A. Saha, N. Silbermann, P. Stetson, and A. Turner.

Chernobyl new safe confinement

International Nuclear Information System (INIS)

Dodd, L.

2011-01-01

The author presents the new safe confinement that will be commissioned at Unit 4 of the Chernobyl NPP in 2015. The confinement will ensure that Chernobyl Unit 4 will be placed in an environmentally safe condition for at least next 100 years. The article highlights the current work status, future perspectives and the feasibility of confinement concept [ru

Transient Structured Distance as a Maneuver in Marital Therapy

Science.gov (United States)

Greene, Bernard L.; And Others

1973-01-01

Experience with 73 cases has shown the value of Transient Structured Distance as a maneuver in marriage therapy. While the TSD is a radical form of intervention with risks of anxiety reactions, homosexual panic, or divorce, it has proved effective with difficult forms of acute or chronic marital disharmony. (Author)

Occupational driver safety: conceptualising a leadership-based intervention to improve safe driving performance.

Science.gov (United States)

Newnam, Sharon; Lewis, Ioni; Watson, Barry

2012-03-01

Occupational driving crashes are the most common cause of death and injury in the workplace. The physical and psychological outcomes following injury are also very costly to organizations. Thus, safe driving poses a managerial challenge. Some research has attempted to address this issue through modifying discrete and often simple target behaviours (e.g., driver training programs). However, current intervention approaches in the occupational driving field generally consider the role of organizational factors in workplace safety. This study adopts the A-B-C framework to identify the contingencies associated with an effective exchange of safety information within the occupational driving context. Utilizing a sample of occupational drivers and their supervisors, this multi-level study examines the contingencies associated with the exchange of safety information within the supervisor-driver relationship. Safety values are identified as an antecedent of the safety information exchange, and the quality of the leader-member exchange relationship and safe driving performance is identified as the behavioural consequences. We also examine the function of role overload as a factor influencing the relationship between safety values and the safety information exchange. Hierarchical linear modelling found that role overload moderated the relationship between supervisors' perceptions of the value given to safety and the safety information exchange. A significant relationship was also found between the safety information exchange and the subsequent quality of the leader-member exchange relationship. Finally, the quality of the leader-member exchange relationship was found to be significantly associated with safe driving performance. Theoretical and practical implications of these results are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

75 FR 1734 - Children’s Online Privacy Protection Rule Safe Harbor Proposed Self-Regulatory Guidelines; i-SAFE...

Science.gov (United States)

2010-01-13

... Proposed Self-Regulatory Guidelines; i-SAFE, Inc. Application for Safe Harbor AGENCY: Federal Trade... for public comment concerning proposed self-regulatory guidelines submitted by i-SAFE, Inc. under the... approval self-regulatory guidelines that would implement the Rule's protections.\\3\\ \\1\\ 64 FR 59888 (1999...

Urban gas drilling and distance ordinances in the Texas Barnett Shale

International Nuclear Information System (INIS)

Fry, Matthew

2013-01-01

Newly accessible shale deposits and other unconventional sources of natural gas have dramatically increased global gas reserves and are regarded as major future energy sources. Shale gas drilling began in Texas and is expanding throughout the U.S. and globally. In Texas and other regions, large population centers overlie these deposits. As a result, city residents increasingly come into contact with extraction activities. The proximity of drilling activities to residential areas raises a number of concerns, including noise, dust and emissions hazards, public safety, diminished quality of life, and effects on neighborhood aesthetics and property values. Cities in Texas address these concerns through setback ordinances that regulate the distance between gas wells and residences, schools, floodplains, etc. Although the state of Texas permits drilling 200 ft (61 m) from residences, many municipalities in the Dallas–Fort Worth Metroplex (DFW) have established longer setback distances. This paper analyzes the purpose and basis for setback distances among 26 municipalities in DFW. Findings show that there is no uniform setback distance, distances have increased over time, and, rather than technically-based, setbacks are political compromises. For policy makers confronted with urban shale gas drilling, deriving setback distances from advanced emissions monitoring could decrease setback distance ambiguity. -- Highlights: •Urban shale gas drilling is expanding across the globe. •Municipal distance regulations address many concerns associated with urban drilling. •In Texas, setbacks have no empirical basis, but are political compromises. •Advanced monitoring methods could be used to standardize setback distances

Safeness of radiological machinery

International Nuclear Information System (INIS)

Yokoyama, Shun

1979-01-01

The human factors affecting the safeness of radiological machinery, which are often very big and complicated machines, are described from the stand point of handling. 20 to 50% of the troubles on equipments seem to be caused by men. This percentage will become even higher in highly developed equipments. Human factors have a great influence on the safeness of radiological equipments. As the human factors, there are sensory factors and knowledge factors as well as psychological factors, and the combination of these factors causes mishandling and danger. Medical services at present are divided in various areas, and consist of the teamwork of the people in various professions. Good human relationship, education and control are highly required to secure the safeness. (Kobatake, H.)

Reading values of X-ray diffractogram with a digitalizar help

International Nuclear Information System (INIS)

Vaquera, A.; Oliveira, N.P. de.

1985-01-01

Accuracy of responses obtained through the sketch of deflection peaks in a determined position of the X-ray diffractogram, with hight rotation velocity of the goniometer, is attained with detriment of the resolution. However, the use of a HP 9836A digitalizer connected to HP 9830A minicomputer minimizes reading errors, with the advantage of being faster and nome accurate and precise. Knowing the diffractogram extreme reading values or 'Ad'amplitude (in Θ degrees), it possible to determine the diffratogram angular distance and the distances between the peaks and the diffratogram origin. These values can be expressed in deflection terms (in amgstrons througg Bragg equation. Precision also depends upon the position of the diffratogram in relation to the coordenates established in the digitalizer table. This problem ca be prevented calculating individual distances from each peak to the origin and end of the diffractogram, considering a fixed point on digitalizer table as coordinates of origin, what, however it demands a rather longer response time. The method also permits the utilization of an internal standard, in order to determine the distances in relatIon to the known position of a peak starting from its correspondent deflection value. It is possible to identify the minerals of the analized sample, stocking the deflection values of values of main natural minerals in the minicomputer memory [pt

Predicting the Permanent Safe Donor Area for Hair Transplantation in Koreans with Male Pattern Baldness according to the Position of the Parietal Whorl

Science.gov (United States)

Na, Young Cheon; Moh, Jae Seong; Lee, Seung Yong; You, Seung Hyun

2014-01-01

Background The most crucial factor in hair transplantation for male pattern baldness (MPB) patients is the efficient utilization of the donor-recipient ratio. However, there is no known factor that scientifically predicts the rate of progression of alopecia or indicates a permanently safe donor area. Methods The study considered 1,008 Korean adult males with MPB; of these, it excluded 56 males with an absence of parietal whorls (PWs). The authors investigated the distance from the vertical bimeatal line (VM) to the PW, from the PW to the upper border of the helical rim (HR), and the distance from the PW to the occipital fringe (OF) in 952 subjects with a PW. Furthermore, we examined the distance from the PW to the OF considering the duration of alopecia and age in 322 subjects with vertex alopecia. Results The distance between the VM and PW varied from 1.5 to 11 cm, with an average distance of 6.25 cm. The PW-HR distance ranged from 3.4 to 17.5 cm, and the average distance was 7.79 cm. The PW-OF distance ranged from 0.5 to 5.5 cm, and the average distance was 2.37 cm. Conclusions For the PW, very large variations existed in the vertical direction. The position of the PW could predict the progression range of the total alopecia of the vertex. Alopecia mostly progresses within 6 cm of the PW toward the occipital side. PMID:24883280

Predicting the Permanent Safe Donor Area for Hair Transplantation in Koreans with Male Pattern Baldness according to the Position of the Parietal Whorl

Directory of Open Access Journals (Sweden)

Jae Hyun Park

2014-05-01

Full Text Available Background The most crucial factor in hair transplantation for male pattern baldness (MPB patients is the efficient utilization of the donor-recipient ratio. However, there is no known factor that scientifically predicts the rate of progression of alopecia or indicates a permanently safe donor area. Methods The study considered 1,008 Korean adult males with MPB; of these, it excluded 56 males with an absence of parietal whorls (PWs. The authors investigated the distance from the vertical bimeatal line (VM to the PW, from the PW to the upper border of the helical rim (HR, and the distance from the PW to the occipital fringe (OF in 952 subjects with a PW. Furthermore, we examined the distance from the PW to the OF considering the duration of alopecia and age in 322 subjects with vertex alopecia. Results The distance between the VM and PW varied from 1.5 to 11 cm, with an average distance of 6.25 cm. The PW-HR distance ranged from 3.4 to 17.5 cm, and the average distance was 7.79 cm. The PW-OF distance ranged from 0.5 to 5.5 cm, and the average distance was 2.37 cm. Conclusions For the PW, very large variations existed in the vertical direction. The position of the PW could predict the progression range of the total alopecia of the vertex. Alopecia mostly progresses within 6 cm of the PW toward the occipital side.

Semantic distance as a critical factor in icon design for in-car infotainment systems.

Science.gov (United States)

Silvennoinen, Johanna M; Kujala, Tuomo; Jokinen, Jussi P P

2017-11-01

In-car infotainment systems require icons that enable fluent cognitive information processing and safe interaction while driving. An important issue is how to find an optimised set of icons for different functions in terms of semantic distance. In an optimised icon set, every icon needs to be semantically as close as possible to the function it visually represents and semantically as far as possible from the other functions represented concurrently. In three experiments (N = 21 each), semantic distances of 19 icons to four menu functions were studied with preference rankings, verbal protocols, and the primed product comparisons method. The results show that the primed product comparisons method can be efficiently utilised for finding an optimised set of icons for time-critical applications out of a larger set of icons. The findings indicate the benefits of the novel methodological perspective into the icon design for safety-critical contexts in general. Copyright © 2017 Elsevier Ltd. All rights reserved.

Distancing from experienced self: how global-versus-local perception affects estimation of psychological distance.

Science.gov (United States)

Liberman, Nira; Förster, Jens

2009-08-01

In 4 studies, the authors examined the prediction derived from construal level theory (CLT) that higher level of perceptual construal would enhance estimated egocentric psychological distance. The authors primed participants with global perception, local perception, or both (the control condition). Relative to the control condition, global processing made participants estimate larger psychological distances in time (Study 1), space (Study 2), social distance (Study 3), and hypotheticality (Study 4). Local processing had the opposite effect. Consistent with CLT, all studies show that the effect of global-versus-local processing did emerge when participants estimated egocentric distances, which are distances from the experienced self in the here and now, but did not emerge with temporal distances not from now (Study 1), spatial distances not from here (Study 2), social distances not from the self (Study 3), or hypothetical events that did not involve altering an experienced reality (Study 4).

ORDERED WEIGHTED DISTANCE MEASURE

Institute of Scientific and Technical Information of China (English)

Zeshui XU; Jian CHEN

2008-01-01

The aim of this paper is to develop an ordered weighted distance (OWD) measure, which is thegeneralization of some widely used distance measures, including the normalized Hamming distance, the normalized Euclidean distance, the normalized geometric distance, the max distance, the median distance and the min distance, etc. Moreover, the ordered weighted averaging operator, the generalized ordered weighted aggregation operator, the ordered weighted geometric operator, the averaging operator, the geometric mean operator, the ordered weighted square root operator, the square root operator, the max operator, the median operator and the min operator axe also the special cases of the OWD measure. Some methods depending on the input arguments are given to determine the weights associated with the OWD measure. The prominent characteristic of the OWD measure is that it can relieve (or intensify) the influence of unduly large or unduly small deviations on the aggregation results by assigning them low (or high) weights. This desirable characteristic makes the OWD measure very suitable to be used in many actual fields, including group decision making, medical diagnosis, data mining, and pattern recognition, etc. Finally, based on the OWD measure, we develop a group decision making approach, and illustrate it with a numerical example.

Thickness and clearance visualization based on distance field of 3D objects

Directory of Open Access Journals (Sweden)

Masatomo Inui

2015-07-01

Full Text Available This paper proposes a novel method for visualizing the thickness and clearance of 3D objects in a polyhedral representation. The proposed method uses the distance field of the objects in the visualization. A parallel algorithm is developed for constructing the distance field of polyhedral objects using the GPU. The distance between a voxel and the surface polygons of the model is computed many times in the distance field construction. Similar sets of polygons are usually selected as close polygons for close voxels. By using this spatial coherence, a parallel algorithm is designed to compute the distances between a cluster of close voxels and the polygons selected by the culling operation so that the fast shared memory mechanism of the GPU can be fully utilized. The thickness/clearance of the objects is visualized by distributing points on the visible surfaces of the objects and painting them with a unique color corresponding to the thickness/clearance values at those points. A modified ray casting method is developed for computing the thickness/clearance using the distance field of the objects. A system based on these algorithms can compute the distance field of complex objects within a few minutes for most cases. After the distance field construction, thickness/clearance visualization at a near interactive rate is achieved.

Safe Cooperating Cyber-Physical Systems using Wireless Communication

DEFF Research Database (Denmark)

Pop, Paul; Scholle, Detlef; Sljivo, Irfan

2017-01-01

This paper presents an overview of the ECSEL project entitled ―Safe Cooperating Cyber-Physical Systems using Wireless Communication‖ (SafeCOP), which runs during the period 2016–2019. SafeCOP targets safety-related Cooperating Cyber-Physical Systems (CO-CPS) characterised by use of wireless...... detection of abnormal behaviour, triggering if needed a safe degraded mode. SafeCOP will also develop methods and tools, which will be used to produce safety assurance evidence needed to certify cooperative functions. SafeCOP will extend current wireless technologies to ensure safe and secure cooperation...

Bifurcation of Safe Basins and Chaos in Nonlinear Vibroimpact Oscillator under Harmonic and Bounded Noise Excitations

Directory of Open Access Journals (Sweden)

Rong Haiwu

2014-01-01

Full Text Available The erosion of the safe basins and chaotic motions of a nonlinear vibroimpact oscillator under both harmonic and bounded random noise is studied. Using the Melnikov method, the system’s Melnikov integral is computed and the parametric threshold for chaotic motions is obtained. Using the Monte-Carlo and Runge-Kutta methods, the erosion of the safe basins is also discussed. The sudden change in the character of the stochastic safe basins when the bifurcation parameter of the system passes through a critical value may be defined as an alternative stochastic bifurcation. It is founded that random noise may destroy the integrity of the safe basins, bring forward the occurrence of the stochastic bifurcation, and make the parametric threshold for motions vary in a larger region, hence making the system become more unsafely and chaotic motions may occur more easily.

An Assessment of the VHTR Safety Distance Using the Reliability Physics Model

International Nuclear Information System (INIS)

Lee, Joeun; Kim, Jintae; Jae, Moosung

2015-01-01

In Korea planning the production of hydrogen using high temperature from nuclear power is in progress. To produce hydrogen from nuclear plants, supplying temperature above 800 .deg. C is required. Therefore, Very High Temperature Reactor (VHTR) which is able to provide about 950 .deg. C is suitable. In situation of high temperature and corrosion where hydrogen might be released easily, hydrogen production facility using VHTR has a danger of explosion. Moreover explosion not only has a bad influence upon facility itself but also on VHTR. Those explosions result in unsafe situation that cause serious damage. However, In terms of thermal-hydraulics view, long distance makes low efficiency Thus, in this study, a methodology for the safety assessment of safety distance between the hydrogen production facilities and the VHTR is developed with reliability physics model. Based on the standard safety criteria which is a value of 1 x 10 -6 , the safety distance between the hydrogen production facilities and the VHTR using reliability physics model are calculated to be a value of 60m - 100m. In the future, assessment for characteristic of VHTR, the capacity to resist pressure from outside hydrogen explosion and the overpressure for the large amount of detonation volume in detail is expected to identify more precise safety distance using this reliability physics model

InaSAFE applications in disaster preparedness

Science.gov (United States)

Pranantyo, Ignatius Ryan; Fadmastuti, Mahardika; Chandra, Fredy

2015-04-01

Disaster preparedness activities aim to reduce the impact of disasters by being better prepared to respond when a disaster occurs. In order to better anticipate requirements during a disaster, contingency planning activities can be undertaken prior to a disaster based on a realistic disaster scenario. InaSAFE is a tool that can inform this process. InaSAFE is a free and open source software that estimates the impact to people and infrastructure from potential hazard scenarios. By using InaSAFE, disaster managers can develop scenarios of disaster impacts (people and infrastructures affected) to inform their contingency plan and emergency response operation plan. While InaSAFE provides the software framework exposure data and hazard data are needed as inputs to run this software. Then InaSAFE can be used to forecast the impact of the hazard scenario to the exposure data. InaSAFE outputs include estimates of the number of people, buildings and roads are affected, list of minimum needs (rice and clean water), and response checklist. InaSAFE is developed by Indonesia's National Disaster Management Agency (BNPB) and the Australian Government, through the Australia-Indonesia Facility for Disaster Reduction (AIFDR), in partnership with the World Bank - Global Facility for Disaster Reduction and Recovery (GFDRR). This software has been used in many parts of Indonesia, including Padang, Maumere, Jakarta, and Slamet Mountain for emergency response and contingency planning.

Missing-Values Adjustment for Mixed-Type Data

Directory of Open Access Journals (Sweden)

Agostino Tarsitano

2011-01-01

data sets involving a mixture of numeric, ordinal, binary, and categorical variables. Our technique is a variation of the popular nearest neighbor hot deck imputation (NNHDI where “nearest” is defined in terms of a global distance obtained as a convex combination of the distance matrices computed for the various types of variables. We address the problem of proper weighting of the partial distance matrices in order to reflect their significance, reliability, and statistical adequacy. Performance of several weighting schemes is compared under a variety of settings in coordination with imputation of the least power mean of the Box-Cox transformation applied to the values of the donors. Through analysis of simulated and actual data sets, we will show that this approach is appropriate. Our main contribution has been to demonstrate that mixed data may optimally be combined to allow the accurate reconstruction of missing values in the target variable even when some data are absent from the other fields of the record.

Patellar instability in Indian population: relevance of tibial tuberosity and trochlear groove distance

Directory of Open Access Journals (Sweden)

Kulkarni Sourabh

2016-01-01

Full Text Available Introduction: The tibial tuberosity to trochlear groove (TTTG distance in the western population is extensively studied through various modalities such as X-rays, computerised tomography and magnetic resonance imaging. However, to our knowledge there is very little or no literature support to indicate that TTTG distance has been studied in the Indian population. Methods: We therefore undertook a study to measure the TTTG distance in 100 MRI scans of normal Indian knees. Patients with the following co-morbidities were excluded from the study; ligamentous laxity, patellofemoral instability, mal-alignment and osteoarthritis. We measured TTTG distance on the axial MRI slices using OsiriX software. Results: The mean value for females was found to be 14.07 mm and that for male was found to be 13.34 mm. Our study indicates that the TTTG distance, using MRI scans as measurement modality, in the Indian population is significantly different when compared to the published western data. Discussion: We believe that this study can form the basis for future studies on the relationship between TTTG distance and patellar instability in Indian population.

Safe Minimum Internal Temperature Chart

Science.gov (United States)

... Internal Temperature Chart Safe steps in food handling, cooking, and storage are essential in preventing foodborne illness. You can't see, smell, or taste harmful bacteria that may cause illness. In every step of food preparation, follow the four guidelines to keep food safe: ...

Skin surface hydration decreases rapidly during long distance flights.

Science.gov (United States)

Guéhenneux, Sabine; Gardinier, Sophie; Morizot, Frederique; Le Fur, Isabelle; Tschachler, Erwin

2012-05-01

Dehydration of the stratum corneum leads to sensations and symptoms of 'dry skin' such as skin tightness and itchiness. As these complaints are frequently experienced by airline travellers, the aim of this study was to investigate the changes in skin surface hydration during long distance flights. The study was performed on four healthy Caucasian, and on four Japanese women aged 29-39 years, travelling on long distance flights. They had stopped using skin care products at least 12 h before, and did not apply them during the flights. The air temperature and relative humidity inside the cabin, as well as skin capacitance of the face and forearm of participants, were registered at several time points before and during the flights. Relative humidity of the aircraft cabin dropped to levels below 10% within 2 h after take-off and stayed at this value throughout the flight. Skin capacitance decreased rapidly on both the face and forearms with most pronounced changes on the cheeks where it decreased by up to 37%. Our results demonstrate that during long distance flights, the aircraft cabin environment leads to a rapid decrease in stratum corneum hydration, an alteration, which probably accounts for the discomfort experienced by long distance aircraft travellers. © 2011 John Wiley & Sons A/S.

Decrease in Ground-Run Distance of Small Airplanes by Applying Electrically-Driven Wheels

Science.gov (United States)

Kobayashi, Hiroshi; Nishizawa, Akira

A new takeoff method for small airplanes was proposed. Ground-roll performance of an airplane driven by electrically-powered wheels was experimentally and computationally studied. The experiments verified that the ground-run distance was decreased by half with a combination of the powered driven wheels and propeller without increase of energy consumption during the ground-roll. The computational analysis showed the ground-run distance of the wheel-driven aircraft was independent of the motor power when the motor capability exceeded the friction between tires and ground. Furthermore, the distance was minimized when the angle of attack was set to the value so that the wing generated negative lift.

Combined electron/photon (E/P) postoperative radiotherapy (RT) for early breast cancer based on central lung distance (CLD) values

International Nuclear Information System (INIS)

Akahane, Keiko; Takahashi, Satoshi; Nakamura, Michiko

2008-01-01

Combined electron/photon (E/P) method has been introduced since 1999 in the postoperative radiotherapy (RT) for 27 early breast cancer patients out of 491, whose central lung disease (CLD) exceeded over 2.5 cm. Several parameters were analyzed between the conventional method and E/P method. Remarkable improvement was established as follows, CLD 2.64 vs. 1.26 cm, maximum lung distance (MLD) 2.75 vs. 1.40 cm and maximum heart distance (MHD) 1.81 vs. 0.58 cm, respectively (p<0.0001). Combined E/P method would be valid to avoid lung complications and long-term cardiac mortality. (author)

Observing integrals of heat kernels from a distance

DEFF Research Database (Denmark)

Heat kernels have integrals such as Brownian motion mean exit time, potential capacity, and torsional rigidity. We show how to obtain bounds on these values - essentially by observing their behaviour in terms of the distance function from a point and then comparing with corresponding values in ta...... and discussed as test cases. The talk is based on joint work with Vicente Palmer....... in tailor-made warped product spaces. The results will be illustrated by applications to the so-called 'type' problem: How to decide if a given manifold or surface is transient (hyperbolic) or recurrent (parabolic). Specific examples of minimal surfaces and constant pressure dry foams will be shown...

Safe affordable fission engine (SAFE 30) module conductivity test thermal model correlation

International Nuclear Information System (INIS)

Roman, Jose

2001-01-01

The SAFE 30 is a simple, robust space fission power system that is comprised of several independent modules. Each module contains 4 fuel tubes bonded to a central heatpipe. Fission energy is conducted from the fuel tubes to the heatpipe, which in turn transfers the energy to a power conversion system. This paper benchmarks a thermal model of the SAFE 30 with actual test data from simulated SAFE 30 module tests. Two 'dummy' SAFE 30 modules were fabricated - each consisted of 4 1-inch dia. tubes (simulating the fuel tubes) bonded to a central '1' dia. tube (simulating the heatpipe). In the first module the fuel tubes were simply brazed to the heatpipe along the line of contact (leaving void space in the interstices), and in the second module the tubes and heatpipe were brazed via tri-cusps that completely fill the interstices between the tubes. In these tests, fission energy is simulated by placing resistance heaters within each of the 4 fuel tubes. The tests were conducted in a vacuum chamber in 4 configurations: tri-cusps filled with and without an outer insulation wrap, and no tri-cusps with and without an outer insulation wrap. The baseline SAFE 30 configuration uses the brazed tri-cusps. During the tests, the power applied to the heaters was varied in a stepwise fashion, until a steady-state temperature profile was reached. These temperature levels varied between 773 K and 1073 K. To benchmark the thermal model, the input energy and chamber surface temperature were used as boundary conditions for the model. The analytical results from the nodes at the same location as the test thermocouples were plotted again test data to determinate the accuracy of the analysis. The unknown variables on the analysis are the radiation emissivity of the pipe and chamber and the radiation view factor between the module and the chamber. A correlation was determined using a parametric analysis by varying the surface emissivity and view factor until a good match was reached. This

Lack of recruitment in Lavandula stoechas subsp. pedunculata: a case of safe-site limitation

Science.gov (United States)

Sánchez, Ana M.; Peco, Begoña

2007-01-01

Lavandula stoechas subsp. pedunculata regeneration depends exclusively on the establishment of new individuals. Seed availability and seedling emergence and survival are therefore critical life stages and processes for species regeneration. In this study, seedling emergence and survival was monitored for two years in the scrub, both in clearings and adjacent to adult plants, and the surrounding perennial grassland, at 1, 3 and 5 m from the scrub. Soil seed bank spatial distribution was also studied for one year in the same two habitats, using the same sampling design. Soil seed availability in the scrub is high regardless of the distance from the adult individuals. On the contrary, the adjacent grassland shows a drastic fall in seed density, and almost no seedlings were observed there. In the scrub, seedling density was negatively related to distance from the three nearest adult plants in the clearings, and positively related to adult plant size beneath the adult Lavandula plants. There was also a negative relationship between seedling density and the percentage of bare soil. Only one seedling survived the first drought period, with no detection of effects of either position with respect to adult individuals or seedling density. We hypothesized that the study populations suffer a lack of appropriate safe sites within the scrubland while in the adjacent perennial grassland, observed low seed availability was added to safe-site limitation. That results in a lack of successful seedling establishments and a poor expansion potential of Lavandula scrublands, whose edges remain static in the short and medium term. As found in other Mediterranean scrubland, recruitment may only occur in years with particularly favourable weather, under disturbance regimes that increase seedling survival probability or when external dispersal agents increased seed availability in adequate places for Lavandula establishment.

Steering teens safe: a randomized trial of a parent-based intervention to improve safe teen driving.

Science.gov (United States)

Peek-Asa, Corinne; Cavanaugh, Joseph E; Yang, Jingzhen; Chande, Vidya; Young, Tracy; Ramirez, Marizen

2014-07-31

Crashes are the leading cause of death for teens, and parent-based interventions are a promising approach. We assess the effectiveness of Steering Teens Safe, a parent-focused program to increase safe teen driving. Steering Teens Safe aimed to improve parental communication with teens about safe driving using motivational interviewing techniques in conjunction with 19 safe driving lessons. A randomized controlled trial involved 145 parent-teen dyads (70 intervention and 75 control). Intervention parents received a 45-minute session to learn the program with four follow-up phone sessions, a DVD, and a workbook. Control parents received a standard brochure about safe driving. Scores were developed to measure teen-reported quantity and quality of parental communication about safe driving. The main outcome measure was a previously validated Risky Driving Score reported by teens. Because the Score was highly skewed, a generalized linear model based on a gamma distribution was used for analysis. Intervention teens ranked their parent's success in talking about driving safety higher than control teens (p = 0.035) and reported that their parents talked about more topics (non-significant difference). The Risky Driving Score was 21% lower in intervention compared to control teens (85% CI = 0.60, 1.00). Interaction between communication quantity and the intervention was examined. Intervention teens who reported more successful communication had a 42% lower Risky Driving Score (95% CI = 0.37, 0.94) than control parents with less successful communication. This program had a positive although not strong effect, and it may hold the most promise in partnership with other programs, such as Driver's Education or Graduated Driver's License policies. ClinicalTrials.gov NCT01014923. Registered Nov. 16, 2009.

Staying Safe in the Water

Centers for Disease Control (CDC) Podcasts

In this podcast, Dr. Julie Gilchrist, a pediatrician and medical epidemiologist from CDC’s Injury Center, talks about staying safe in the water. Tips are for all audiences, with a focus on preventing drownings and keeping children safe in and around the pool, lake, or ocean.

THE DISTANCE TO M51

Energy Technology Data Exchange (ETDEWEB)

McQuinn, Kristen B. W. [University of Texas at Austin, McDonald Observatory, 2515 Speedway, Stop C1400 Austin, TX 78712 (United States); Skillman, Evan D. [Minnesota Institute for Astrophysics, School of Physics and Astronomy, 116 Church Street, S.E., University of Minnesota, Minneapolis, MN 55455 (United States); Dolphin, Andrew E. [Raytheon Company, 1151 E. Hermans Road, Tucson, AZ 85756 (United States); Berg, Danielle [Center for Gravitation, Cosmology and Astrophysics, Department of Physics, University of Wisconsin Milwaukee, 1900 East Kenwood Boulevard, Milwaukee, WI 53211 (United States); Kennicutt, Robert, E-mail: kmcquinn@astro.as.utexas.edu [Institute for Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom)

2016-07-20

Great investments of observing time have been dedicated to the study of nearby spiral galaxies with diverse goals ranging from understanding the star formation process to characterizing their dark matter distributions. Accurate distances are fundamental to interpreting observations of these galaxies, yet many of the best studied nearby galaxies have distances based on methods with relatively large uncertainties. We have started a program to derive accurate distances to these galaxies. Here we measure the distance to M51—the Whirlpool galaxy—from newly obtained Hubble Space Telescope optical imaging using the tip of the red giant branch method. We measure the distance modulus to be 8.58 ± 0.10 Mpc (statistical), corresponding to a distance modulus of 29.67 ± 0.02 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian Maximum Likelihood technique that reduces measurement uncertainties.

Near-IR TRGB Distance Modulus of Dwarf Irregular Galaxy IC 1613

Directory of Open Access Journals (Sweden)

M. Y. Jung

2009-12-01

Full Text Available The JHKs magnitudes of the red giant branch tip (TRGB and the distance moduli of the nearby dwarf irregular galaxy IC 1613 have been determined from the nearinfrared luminosity functions (LFs of the resolved stars in the galaxy. Applying a Savitzky-Golay filtering, we derived the second derivatives of the LFs, and estimated the apparent magnitudes of the TRGB as mJ = 19.1, mH = 18.4, and mKs = 18:0. The mean values of the theoretical absolute magnitudes of the TRGB were measured by using the Yonsei-Yale isochrones with a metallicity range of -2.1 < [Fe/H] < -0.5 and age of 12 Gyr. The derived values of near-infrared TRGB distance moduli for IC 1613 are (m-M = 24.12±0:25, 24.20±0.44, and 24.00±0.52 for J;H, and Ks bands, respectively.

SAFE testing nuclear rockets economically

International Nuclear Information System (INIS)

Howe, Steven D.; Travis, Bryan; Zerkle, David K.

2003-01-01

Several studies over the past few decades have recognized the need for advanced propulsion to explore the solar system. As early as the 1960s, Werner Von Braun and others recognized the need for a nuclear rocket for sending humans to Mars. The great distances, the intense radiation levels, and the physiological response to zero-gravity all supported the concept of using a nuclear rocket to decrease mission time. These same needs have been recognized in later studies, especially in the Space Exploration Initiative in 1989. One of the key questions that has arisen in later studies, however, is the ability to test a nuclear rocket engine in the current societal environment. Unlike the Rover/NERVA programs in the 1960s, the rocket exhaust can no longer be vented to the open atmosphere. As a consequence, previous studies have examined the feasibility of building a large-scale version of the Nuclear Furnace Scrubber that was demonstrated in 1971. We have investigated an alternative that would deposit the rocket exhaust along with any entrained fission products directly into the ground. The Subsurface Active Filtering of Exhaust, or SAFE, concept would allow variable sized engines to be tested for long times at a modest expense. A system overview, results of preliminary calculations, and cost estimates of proof of concept demonstrations are presented. The results indicate that a nuclear rocket could be tested at the Nevada Test Site for under $20 M

Safe biodegradable fluorescent particles

Science.gov (United States)

Martin, Sue I [Berkeley, CA; Fergenson, David P [Alamo, CA; Srivastava, Abneesh [Santa Clara, CA; Bogan, Michael J [Dublin, CA; Riot, Vincent J [Oakland, CA; Frank, Matthias [Oakland, CA

2010-08-24

A human-safe fluorescence particle that can be used for fluorescence detection instruments or act as a safe simulant for mimicking the fluorescence properties of microorganisms. The particle comprises a non-biological carrier and natural fluorophores encapsulated in the non-biological carrier. By doping biodegradable-polymer drug delivery microspheres with natural or synthetic fluorophores, the desired fluorescence can be attained or biological organisms can be simulated without the associated risks and logistical difficulties of live microorganisms.

Encyclopedia of distances

CERN Document Server

Deza, Michel Marie

2009-01-01

Distance metrics and distances have become an essential tool in many areas of pure and applied Mathematics. This title offers both independent introductions and definitions, while at the same time making cross-referencing easy through hyperlink-like boldfaced references to original definitions.

Safe Haven.

Science.gov (United States)

Bush, Gail

2003-01-01

Discusses school libraries as safe havens for teenagers and considers elements that foster that atmosphere, including the physical environment, lack of judgments, familiarity, leisure, and a welcoming nature. Focuses on the importance of relationships, and taking the time to listen to teens and encourage them. (LRW)

D-dimer testing for safe exclusion and risk stratification in patients with acute pulmonary embolism in primary care

Directory of Open Access Journals (Sweden)

Zhou Yin

2015-01-01

Full Text Available Background: Safe exclusion and risk stratification are currently recommended for the initial management of patients with acute pulmonary embolism (APE. The aim of this study was to assess the safe exclusion and risk stratification value of D-dimer (DD for APE when tested at the beginning of admission. Materials and Methods: All consecutive Chinese APE patients and controls were recruited from January 2010 to December 2012. All measurements of serum indexes were made in duplicate and blinded to the patients′ status. All the 40 patients with the first episode of APE were confirmed by multi-detector computed tomographic pulmonary angiography. The plasma prothrombin time (PT, activated partial thromboplastin time, thrombin time, fibrinogen, and DD levels were measured within 24 h of admission. We used the Mann-Whitney U-test to determine the differences between groups and drew receiver operator characteristic curve to evaluate the indexes′ value in the APE screening. Results: The PT and DD in the APE group were significantly higher than those in the disease control group (P 1820 μg/L as cut-off value, the sensitivity, specificity, positive and negative predictive value was 82.5%, 75.2%, 56.9%, and 91.6%, respectively. Conclusion: The patients with APE showed significant higher DD levels compared with disease controls, suggesting a negative qualitative DD test result can safely and efficiently exclude APE in primary care.

Power control of SAFE reactor using fuzzy logic

International Nuclear Information System (INIS)

Irvine, Claude

2002-01-01

Controlling the 100 kW SAFE (Safe Affordable Fission Engine) reactor consists of design and implementation of a fuzzy logic process control system to regulate dynamic variables related to nuclear system power. The first phase of development concentrates primarily on system power startup and regulation, maintaining core temperature equilibrium, and power profile matching. This paper discusses the experimental work performed in those areas. Nuclear core power from the fuel elements is simulated using resistive heating elements while heat rejection is processed by a series of heat pipes. Both axial and radial nuclear power distributions are determined from neuronic modeling codes. The axial temperature profile of the simulated core is matched to the nuclear power profile by varying the resistance of the heating elements. The SAFE model establishes radial temperature profile equivalence by establishing 32 control zones as the nodal coordinates. Control features also allow for slow warm up, since complete shutoff can occur in the heat pipes if heat-source temperatures drop/rise below a certain minimum value, depending on the specific fluid and gas combination in the heat pipe. The entire system is expected to be self-adaptive, i.e., capable of responding to long-range changes in the space environment. Particular attention in the development of the fuzzy logic algorithm shall ensure that the system process remains at set point, virtually eliminating overshoot on start-up and during in-process disturbances. The controller design will withstand harsh environments and applications where it might come in contact with water, corrosive chemicals, radiation fields, etc

Adaptive density trajectory cluster based on time and space distance

Science.gov (United States)

Liu, Fagui; Zhang, Zhijie

2017-10-01

There are some hotspot problems remaining in trajectory cluster for discovering mobile behavior regularity, such as the computation of distance between sub trajectories, the setting of parameter values in cluster algorithm and the uncertainty/boundary problem of data set. As a result, based on the time and space, this paper tries to define the calculation method of distance between sub trajectories. The significance of distance calculation for sub trajectories is to clearly reveal the differences in moving trajectories and to promote the accuracy of cluster algorithm. Besides, a novel adaptive density trajectory cluster algorithm is proposed, in which cluster radius is computed through using the density of data distribution. In addition, cluster centers and number are selected by a certain strategy automatically, and uncertainty/boundary problem of data set is solved by designed weighted rough c-means. Experimental results demonstrate that the proposed algorithm can perform the fuzzy trajectory cluster effectively on the basis of the time and space distance, and obtain the optimal cluster centers and rich cluster results information adaptably for excavating the features of mobile behavior in mobile and sociology network.

Hand calculation of safe separation distances between natural gas pipelines and boilers and nuclear facilities in the Hanford site 300 Area

International Nuclear Information System (INIS)

Daling, P.M.; Graham, T.M.

1999-01-01

The US Department of Energy has undertaken a project to reduce energy expenditures and improve energy system reliability in the 300 Area of the Hanford Site near Richland, Washington. This project replaced the centralized heating system with heating units for individual buildings or groups of buildings, constructed a new natural-gas distribution system to provide a fuel source for many of these units, and constructed a central control building to operate and maintain the system. The individual heating units include steam boilers that are housed in individual annex buildings located in the vicinity of a number of nuclear facilities operated by the Pacific Northwest National Laboratory (PNNL). The described analysis develops the basis for siting the package boilers and natural-gas distribution system used to supply steam to PNNL's 300 Area nuclear facilities. Minimum separation distances that would eliminate or reduce the risks of accidental dispersal of radioactive and hazardous materials in nearby nuclear facilities were calculated based on the effects of four potential fire and explosion (detonation) scenarios involving the boiler and natural-gas distribution system. These minimum separation distances were used to support siting decisions for the boilers and natural-gas pipelines

Recoil distance lifetime measurements in 122,124Xe

Science.gov (United States)

Govil, I. M.; Kumar, A.; Iyer, H.; Li, H.; Garg, U.; Ghugre, S. S.; Johnson, T.; Kaczarowski, R.; Kharraja, B.; Naguleswaran, S.; Walpe, J. C.

1998-02-01

Lifetimes of the lower-excited states in 122,124Xe are measured using the recoil-distance Doppler-shift technique. The reactions 110Pd(16O,4n)122Xe and 110Pd(18O,4n)124Xe at a beam energy of 66 MeV were used for this experiment. The lifetimes of the 2+, 4+, 6+, and 8+ states of the ground state band were extracted using the computer code LIFETIME including the corrections due to the side feeding and the nuclear deorientation effects. The lifetime of the 2+ state in 122Xe agrees with the recoil distance method (RDM) measurements but for the 124Xe it does not agree with the RDM measurements but agrees with the Coulomb-excitation experiment. The measured B(E2) values for both the nuclei are compared with the standard algebraic and the multishell models.

Leader-team complementarity: Exploring the interactive effects of leader personality traits and team power distance values on team processes and performance.

Science.gov (United States)

Hu, Jia; Judge, Timothy A

2017-06-01

Integrating the leader trait perspective with dominance complementarity theory, we propose team power distance as an important boundary condition for the indirect impact of leader extraversion, agreeableness, and conscientiousness on team performance through a team's potency beliefs and through relational identification with the leader. Using time-lagged, 3-source data from 71 teams, we found that leader extraversion had a positive indirect impact on team in-role and extrarole performance through relational identification, but only for high power distance teams; leader conscientiousness had a positive influence on team in-role performance through team potency, but only for high power distance teams; and leader agreeableness had a positive effect on team in-role and extrarole performance via relational identification and on team in-role performance via team potency, but only for low power distance teams. The findings address prior inconsistencies regarding the relationships between leader traits and team effectiveness, identify an important boundary condition and key team processes that bridge the links, and provide a deeper understanding of the role of leader traits in teams. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

More than a Safe Space

Science.gov (United States)

Sadowski, Michael

2016-01-01

Over the past three decades, much of the conversation about LGBTQ students in schools has centered on safety--anti-bullying policies, the "safe space" of gay-straight alliances, and "safe zones" marked by rainbow-colored stickers on classroom doors. In this article, Michael Sadowski argues that it's time to move beyond safety…

Comparison of efficiency of distance measurement methodologies in mango (Mangifera indica) progenies based on physicochemical descriptors.

Science.gov (United States)

Alves, E O S; Cerqueira-Silva, C B M; Souza, A M; Santos, C A F; Lima Neto, F P; Corrêa, R X

2012-03-14

We investigated seven distance measures in a set of observations of physicochemical variables of mango (Mangifera indica) submitted to multivariate analyses (distance, projection and grouping). To estimate the distance measurements, five mango progeny (total of 25 genotypes) were analyzed, using six fruit physicochemical descriptors (fruit weight, equatorial diameter, longitudinal diameter, total soluble solids in °Brix, total titratable acidity, and pH). The distance measurements were compared by the Spearman correlation test, projection in two-dimensional space and grouping efficiency. The Spearman correlation coefficients between the seven distance measurements were, except for the Mahalanobis' generalized distance (0.41 ≤ rs ≤ 0.63), high and significant (rs ≥ 0.91; P < 0.001). Regardless of the origin of the distance matrix, the unweighted pair group method with arithmetic mean grouping method proved to be the most adequate. The various distance measurements and grouping methods gave different values for distortion (-116.5 ≤ D ≤ 74.5), cophenetic correlation (0.26 ≤ rc ≤ 0.76) and stress (-1.9 ≤ S ≤ 58.9). Choice of distance measurement and analysis methods influence the.

Assessing the Value of E-Learning Systems

Science.gov (United States)

Levy, Yair

2006-01-01

"Assessing the Value of E-Learning Systems" provides an extensive literature review pulling theories from the field of information systems, psychology and cognitive sciences, distance and online learning, as well as marketing and decision sciences. This book provides empirical evidence for the power of measuring value in the context of e-learning…

Safe injection procedures, injection practices, and needlestick ...

African Journals Online (AJOL)

Results: Safe injection procedures regarding final waste disposal were sufficiently adopted, while measures regarding disposable injection equipment, waste containers, hand hygiene, as well as injection practices were inadequately carried out. Lack of job aid posters that promote safe injection and safe disposal of ...

Distance correlation methods for discovering associations in large astrophysical databases

International Nuclear Information System (INIS)

Martínez-Gómez, Elizabeth; Richards, Mercedes T.; Richards, Donald St. P.

2014-01-01

High-dimensional, large-sample astrophysical databases of galaxy clusters, such as the Chandra Deep Field South COMBO-17 database, provide measurements on many variables for thousands of galaxies and a range of redshifts. Current understanding of galaxy formation and evolution rests sensitively on relationships between different astrophysical variables; hence an ability to detect and verify associations or correlations between variables is important in astrophysical research. In this paper, we apply a recently defined statistical measure called the distance correlation coefficient, which can be used to identify new associations and correlations between astrophysical variables. The distance correlation coefficient applies to variables of any dimension, can be used to determine smaller sets of variables that provide equivalent astrophysical information, is zero only when variables are independent, and is capable of detecting nonlinear associations that are undetectable by the classical Pearson correlation coefficient. Hence, the distance correlation coefficient provides more information than the Pearson coefficient. We analyze numerous pairs of variables in the COMBO-17 database with the distance correlation method and with the maximal information coefficient. We show that the Pearson coefficient can be estimated with higher accuracy from the corresponding distance correlation coefficient than from the maximal information coefficient. For given values of the Pearson coefficient, the distance correlation method has a greater ability than the maximal information coefficient to resolve astrophysical data into highly concentrated horseshoe- or V-shapes, which enhances classification and pattern identification. These results are observed over a range of redshifts beyond the local universe and for galaxies from elliptical to spiral.

The design, construction, and operation of long-distance high-voltage electricity transmission technologies.

Energy Technology Data Exchange (ETDEWEB)

Molburg, J. C.; Kavicky, J. A.; Picel, K. C.

2008-03-03

This report focuses on transmission lines, which operate at voltages of 115 kV and higher. Currently, the highest voltage lines comprising the North American power grid are at 765 kV. The grid is the network of transmission lines that interconnect most large power plants on the North American continent. One transmission line at this high voltage was built near Chicago as part of the interconnection for three large nuclear power plants southwest of the city. Lines at this voltage also serve markets in New York and New England, also very high demand regions. The large power transfers along the West Coast are generally at 230 or 500 kV. Just as there are practical limits to centralization of power production, there are practical limits to increasing line voltage. As voltage increases, the height of the supporting towers, the size of the insulators, the distance between conductors on a tower, and even the width of the right-of-way (ROW) required increase. These design features safely isolate the electric power, which has an increasing tendency to arc to ground as the voltage (or electrical potential) increases. In addition, very high voltages (345 kV and above) are subject to corona losses. These losses are a result of ionization of the atmosphere, and can amount to several megawatts of wasted power. Furthermore, they are a local nuisance to radio transmission and can produce a noticeable hum. Centralized power production has advantages of economies of scale and special resource availability (for instance, hydro resources), but centralized power requires long-distance transfers of power both to reach customers and to provide interconnections for reliability. Long distances are most economically served at high voltages, which require large-scale equipment and impose a substantial footprint on the corridors through which power passes. The most visible components of the transmission system are the conductors that provide paths for the power and the towers that keep these

Learner characteristics involved in distance learning

Energy Technology Data Exchange (ETDEWEB)

Cernicek, A.T.; Hahn, H.A.

1991-01-01

Distance learning represents a strategy for leveraging resources to solve educational and training needs. Although many distance learning programs have been developed, lessons learned regarding differences between distance learning and traditional education with respect to learner characteristics have not been well documented. Therefore, we conducted a survey of 20 distance learning professionals. The questionnaire was distributed to experts attending the second Distance Learning Conference sponsored by Los Alamos National Laboratory. This survey not only acquired demographic information from each of the respondents but also identified important distance learning student characteristics. Significant distance learner characteristics, which were revealed statistically and which influence the effectiveness of distance learning, include the following: reading level, student autonomy, and self-motivation. Distance learning cannot become a more useful and effective method of instruction without identifying and recognizing learner characteristics. It will be important to consider these characteristics when designing all distance learning courses. This paper will report specific survey findings and their implications for developing distance learning courses. 9 refs., 6 tabs.

Distance Magic-Type and Distance Antimagic-Type Labelings of Graphs

Science.gov (United States)

Freyberg, Bryan J.

Generally speaking, a distance magic-type labeling of a graph G of order n is a bijection l from the vertex set of the graph to the first n natural numbers or to the elements of a group of order n, with the property that the weight of each vertex is the same. The weight of a vertex x is defined as the sum (or appropriate group operation) of all the labels of vertices adjacent to x. If instead we require that all weights differ, then we refer to the labeling as a distance antimagic-type labeling. This idea can be generalized for directed graphs; the weight will take into consideration the direction of the arcs. In this manuscript, we provide new results for d-handicap labeling, a distance antimagic-type labeling, and introduce a new distance magic-type labeling called orientable Gamma-distance magic labeling. A d-handicap distance antimagic labeling (or just d-handicap labeling for short) of a graph G = ( V,E) of order n is a bijection l from V to the set {1,2,...,n} with induced weight function [special characters omitted]. such that l(xi) = i and the sequence of weights w(x 1),w(x2),...,w (xn) forms an arithmetic sequence with constant difference d at least 1. If a graph G admits a d-handicap labeling, we say G is a d-handicap graph. A d-handicap incomplete tournament, H(n,k,d ) is an incomplete tournament of n teams ranked with the first n natural numbers such that each team plays exactly k games and the strength of schedule of the ith ranked team is d more than the i + 1st ranked team. That is, strength of schedule increases arithmetically with strength of team. Constructing an H(n,k,d) is equivalent to finding a d-handicap labeling of a k-regular graph of order n.. In Chapter 2 we provide general constructions for every d for large classes of both n and k, providing breadfth and depth to the catalog of known H(n,k,d)'s. In Chapters 3 - 6, we introduce a new type of labeling called orientable Gamma-distance magic labeling. Let Gamma be an abelian group of order

Managing Cassini Safe Mode Attitude at Saturn

Science.gov (United States)

Burk, Thomas A.

2010-01-01

The Cassini spacecraft was launched on October 15, 1997 and arrived at Saturn on June 30, 2004. It has performed detailed observations and remote sensing of Saturn, its rings, and its satellites since that time. In the event safe mode interrupts normal orbital operations, Cassini has flight software fault protection algorithms to detect, isolate, and recover to a thermally safe and commandable attitude and then wait for further instructions from the ground. But the Saturn environment is complex, and safety hazards change depending on where Cassini is in its orbital trajectory around Saturn. Selecting an appropriate safe mode attitude that insures safe operation in the Saturn environment, including keeping the star tracker field of view clear of bright bodies, while maintaining a quiescent, commandable attitude, is a significant challenge. This paper discusses the Cassini safe table management strategy and the key criteria that must be considered, especially during low altitude flybys of Titan, in deciding what spacecraft attitude should be used in the event of safe mode.

Distance-transitive graphs

NARCIS (Netherlands)

Cohen, A.M.; Beineke, L.W.; Wilson, R.J.; Cameron, P.J.

2004-01-01

In this chapter we investigate the classification of distance-transitive graphs: these are graphs whose automorphism groups are transitive on each of the sets of pairs of vertices at distance i, for i = 0, 1,.... We provide an introduction into the field. By use of the classification of finite

Improved distances and ages for stars common to TGAS and RAVE

Science.gov (United States)

McMillan, Paul J.; Kordopatis, Georges; Kunder, Andrea; Binney, James; Wojno, Jennifer; Zwitter, Tomaž; Steinmetz, Matthias; Bland-Hawthorn, Joss; Gibson, Brad K.; Gilmore, Gerard; Grebel, Eva K.; Helmi, Amina; Munari, Ulisse; Navarro, Julio F.; Parker, Quentin A.; Seabroke, George; Watson, Fred; Wyse, Rosemary F. G.

2018-04-01

We combine parallaxes from the first Gaia data release with the spectrophotometric distance estimation framework for stars in the fifth RAVE survey data release. The combined distance estimates are more accurate than either determination in isolation - uncertainties are on average two times smaller than for RAVE-only distances (three times smaller for dwarfs), and 1.4 times smaller than TGAS parallax uncertainties (two times smaller for giants). We are also able to compare the estimates from spectrophotometry to those from Gaia, and use this to assess the reliability of both catalogues and improve our distance estimates. We find that the distances to the lowest log g stars are, on average, overestimated and caution that they may not be reliable. We also find that it is likely that the Gaia random uncertainties are smaller than the reported values. As a byproduct we derive ages for the RAVE stars, many with relative uncertainties less than 20 percent. These results for 219 566 RAVE sources have been made publicly available, and we encourage their use for studies that combine the radial velocities provided by RAVE with the proper motions provided by Gaia. A sample that we believe to be reliable can be found by taking only the stars with the flag notification `flag_any=0'.

CREST-SAFE: Snow LST validation, wetness profiler creation, and depth/SWE product development

Science.gov (United States)

Perez Diaz, C. L.; Lakhankar, T.; Romanov, P.; Khanbilvardi, R.; Munoz Barreto, J.; Yu, Y.

2017-12-01

CREST-SAFE: Snow LST validation, wetness profiler creation, and depth/SWE product development The Field Snow Research Station (also referred to as Snow Analysis and Field Experiment, SAFE) is operated by the NOAA Center for Earth System Sciences and Remote Sensing Technologies (CREST) in the City University of New York (CUNY). The field station is located within the premises of the Caribou Municipal Airport (46°52'59'' N, 68°01'07'' W) and in close proximity to the National Weather Service (NWS) Regional Forecast Office. The station was established in 2010 to support studies in snow physics and snow remote sensing. The Visible Infrared Imager Radiometer Suite (VIIRS) Land Surface Temperature (LST) Environmental Data Record (EDR) and Moderate Resolution Imaging Spectroradiometer (MODIS) LST product (provided by the Terra and Aqua Earth Observing System satellites) were validated using in situ LST (T-skin) and near-surface air temperature (T-air) observations recorded at CREST-SAFE for the winters of 2013 and 2014. Results indicate that T-air correlates better than T-skin with VIIRS LST data and that the accuracy of nighttime LST retrievals is considerably better than that of daytime. Several trends in the MODIS LST data were observed, including the underestimation of daytime values and night-time values. Results indicate that, although all the data sets showed high correlation with ground measurements, day values yielded slightly higher accuracy ( 1°C). Additionally, we created a liquid water content (LWC)-profiling instrument using time-domain reflectometry (TDR) at CREST-SAFE and tested it during the snow melt period (February-April) immediately after installation in 2014. Results displayed high agreement when compared to LWC estimates obtained using empirical formulas developed in previous studies, and minor improvement over wet snow LWC estimates. Lastly, to improve on global snow cover mapping, a snow product capable of estimating snow depth and snow water

A Distance Model of Intuitionistic Fuzzy Cross Entropy to Solve Preference Problem on Alternatives

Directory of Open Access Journals (Sweden)

Mei Li

2016-01-01

Full Text Available In the field of decision-making, for the multiple attribute decision-making problem with the partially unknown attribute weights, the evaluation information in the form of the intuitionistic fuzzy numbers, and the preference on alternatives, this paper proposes a comprehensive decision model based on the intuitionistic fuzzy cross entropy distance and the grey correlation analysis. The creative model can make up the deficiency that the traditional intuitionistic fuzzy distance measure is easy to cause the confusion of information and can improve the accuracy of distance measure; meanwhile, the grey correlation analysis method, suitable for the small sample and the poor information decision-making, is applied in the evaluation. This paper constructs a mathematical optimization model of maximizing the synthesis grey correlation coefficient between decision-making evaluation values and decision-makers’ subjective preference values, calculates the attribute weights with the known partial weight information, and then sorts the alternatives by the grey correlation coefficient values. Taking venture capital firm as an example, through the calculation and the variable disturbance, we can see that the methodology used in this paper has good stability and rationality. This research makes the decision-making process more scientific and further improves the theory of intuitionistic fuzzy multiple attribute decision-making.

Anatomical recommendations for safe botulinum toxin injection into temporalis muscle: a simplified reproducible approach.

Science.gov (United States)

Lee, Won-Kang; Bae, Jung-Hee; Hu, Kyung-Seok; Kato, Takafumi; Kim, Seong-Taek

2017-03-01

The objective of this study was to simplify the anatomically safe and reproducible approach for BoNT injection and to generate a detailed topographic map of the important anatomical structures of the temporal region by dividing the temporalis into nine equally sized compartments. Nineteen sides of temporalis muscle were used. The topographies of the superficial temporal artery, middle temporal vein, temporalis tendon, and the temporalis muscle were evaluated. Also evaluated was the postural relations among the foregoing anatomical structures in the temporalis muscle, pivoted upon a total of nine compartments. The temporalis above the zygomatic arch exhibited an oblique quadrangular shape with rounded upper right and left corners. The distance between the anterior and posterior margins of the temporalis muscle was equal to the width of the temporalis rectangle, and the distance between the reference line and the superior temporalis margin was equal to its height. The mean ratio of width to height was 5:4. We recommend compartments Am, Mu, and Pm (coordinates of the rectangular outline) as areas in the temporal region for BoNT injection, because using these sites will avoid large blood vessels and tendons, thus improving the safety and reproducibility of the injection.

Inherently safe light water reactors

International Nuclear Information System (INIS)

Ise, Takeharu

1987-01-01

Today's large nuclear power reactors of world-wise use have been designed based on the philosophy. It seems that recent less electricity demand rates, higher capital cost and the TMI accident let us acknowledge relative small and simplified nuclear plants with safer features, and that Chernobyl accident in 1983 underlines the needs of intrinsic and passive safety characteristics. In such background, several inherently safe reactor concepts have been presented abroad and domestically. First describing 'Can inherently safe reactors be designed,' then I introduce representative reactor concepts of inherently safe LWRs advocated abroad so far. All of these innovative reactors employ intrinsic and passive features in their design, as follows: (1) PIUS, an acronym for Process Inherent Ultimate Safety, or an integral PWR with passive heat sink and passive shutdown mechanism, advocated by ASEA-ATOM of Sweden. (2) MAP(Minimum Attention Plant), or a self-pressurized, natural circulation integral PWR, promoted by CE Inc. of the U.S. (3) TPS(TRIGA Power System), or a compact PWR with passive heat sink and inherent fuel characteristics of large prompt temperature coefficient, prompted by GA Technologies Inc. of the U.S. (4) PIUS-BWR, or an inherently safe BWR employing passively actuated fluid valves, in competition with PIUS, prompted by ORNL of the U.S. Then, I will describe the domestic trends in Japan and the innovative inherently safe LWRs presented domestically so far. (author)

Dementia - keeping safe in the home

Science.gov (United States)

... this page: //medlineplus.gov/ency/patientinstructions/000031.htm Dementia - keeping safe in the home To use the ... make sure the homes of people who have dementia are safe for them. Safety Tips for the ...

Is MRI helpful in assessing the distance of the tumour from the internal os in patients with cervical cancer below FIGO Stage IB2?

International Nuclear Information System (INIS)

Bhosale, P.R.; Iyer, R.B.; Ramalingam, P.; Schmeler, K.M.; Wei, W.; Bassett, R.L.; Ramirez, P.T.; Frumovitz, M.

2016-01-01

Aim: To determine the ability of magnetic resonance imaging (MRI) in detecting tumour-free margins from the internal os (IO). Materials and methods: A database search yielded 79 women with early-stage cervical cancer who underwent radical hysterectomy and preoperative MRI. The sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and accuracy of MRI in assessment of ≤5 and >5 mm IO involvement were calculated with histopathological surgical specimen findings considered to be the reference standard. A main and subset analysis was performed. The subset analysis included only those patients who would have been considered for radical trachelectomy. Results: For predicting a distance between the tumour and the IO of ≤5 mm, MRI had a sensitivity of 73%, a specificity of 98.3%, a PPV of 95%, a NPV of 88.1%, and an accuracy of 89.8% for the main analysis, and sensitivity of 81.8%, a specificity of 93.2% a PPV of 69.2% a NPV of 96.5% and an accuracy of 91.4% for the subset analysis. Conclusion: MRI has high specificity, NPV, and accuracy in detecting tumour from the IO, making MRI suitable for treatment planning in patients desiring trachelectomy to preserve fertility. - Highlights: • Cervical cancer patients who underwent hysterectomy were analyzed on MRI and pathology for involvement of the internal os. • Distance of the tumor from the internal-os was measured on MRI and Pathology and findings were tabulated as > and ≤ 5 mm from the internal os. • MRI has the ability to identify tumor involvement of the internal os. • MRI can help select patients who can undergo trachelectomy safely.

Safeguards Automated Facility Evaluation (SAFE) methodology

International Nuclear Information System (INIS)

Chapman, L.D.; Grady, L.M.; Bennett, H.A.; Sasser, D.W.; Engi, D.

1978-01-01

The SAFE procedure is an efficient method of evaluating the physical protection system of a nuclear facility. Since the algorithms used in SAFE for path generation and evaluation are analytical, many paths can be evaluated with a modest investment in computer time. SAFE is easy to use because the information required is well-defined and the interactive nature of this procedure lends itself to straightforward operation. The modular approach that has been taken allows other functionally equivalent modules to be substituted as they become available. The SAFE procedure has broad applications in the nuclear facility safeguards field as well as in the security field in general. Any fixed facility containing valuable materials or components to be protected from theft or sabotage could be analyzed using this same automated evaluation technique

How safe is 1% alum irrigation in controlling intractable vesical hemorrhage?

Science.gov (United States)

Goswami, A K; Mahajan, R K; Nath, R; Sharma, S K

1993-02-01

A prospective study was done to evaluate the efficacy and safety of intravesical instillation of 1% alum solution in 12 cases of hematuria of vesical origin, uncontrolled by saline irrigation for 24 hours via a 3-way Foley catheter. There were 10 cases of transitional cell carcinoma and 2 of radiation cystitis. Complete response was noted in 6 patients and a partial response in 4. Local side effects included suprapubic pain and vesical tenesmus, which were controlled by antispasmodic and/or analgesic drugs. Transient low grade pyrexia (maximum up to 38.2C) was noted in 4 patients. Among the other various clinical and biochemical parameters, serum aluminum level and prothrombin time showed statistically highly significant changes. Serum aluminum increased from an average baseline value of 1.68 to 3.36 mumol./l. without clinical evidence of aluminum toxicity and with levels well below the recommended safe limit. Prothrombin time increased parallel with the increase in serum aluminum level to a maximum of 1 1/2 times the control. Prothrombin values, therefore, can be used clinically, since they are readily obtainable whereas serum aluminum levels are not. Vesical irrigation with 1% alum solution is a safe method to control hematuria of vesical origin in properly selected cases.

Dose as a function of radial distance from a 930 MeV 4He ion beam

International Nuclear Information System (INIS)

Varma, M.N.; Paretzke, H.; Baum, J.W.; Lyman, J.T.; Howard, J.

1975-01-01

A unique mesh wall ionization chamber (approximating a wall-less ionization chamber) was used to measure dose as a function of radial distance from a 930 MeV 4 He ion beam in air. Measurements were made at distances from about 10 to 40 cm from the ion path. This represents simulated distances of approximately 102 to 404 μm in tissue having a density of 1 g/cm 3 . Experimental values are compared with theoretical calculations, and probable causes of differences found are discussed. (auth)

Avoidance of singularities in asymptotically safe Quantum Einstein Gravity

Energy Technology Data Exchange (ETDEWEB)

Kofinas, Georgios [Research Group of Geometry, Dynamical Systems and Cosmology, Department of Information and Communication Systems Engineering, University of the Aegean, Karlovassi 83200, Samos (Greece); Zarikas, Vasilios, E-mail: gkofinas@aegean.gr, E-mail: vzarikas@teilam.gr [Department of Electrical Engineering, Theory Division, ATEI of Central Greece, 35100 Lamia (Greece)

2015-10-01

New general spherically symmetric solutions have been derived with a cosmological ''constant'' Λ as a source. This Λ term is not constant but it satisfies the properties of the asymptotically safe gravity at the ultraviolet fixed point. The importance of these solutions comes from the fact that they may describe the near to the centre region of black hole spacetimes as this is modified by the Renormalization Group scaling behaviour of the fields. The consistent set of field equations which respect the Bianchi identities is derived and solved. One of the solutions (with conventional sign of temporal-radial metric components) is timelike geodesically complete, and although there is still a curvature divergent origin, this is never approachable by an infalling massive particle which is reflected at a finite distance due to the repulsive origin. Another family of solutions (of both signatures) range from a finite radius outwards, they cannot be extended to the centre of spherical symmetry, and the curvature invariants are finite at the minimum radius.

Avoidance of singularities in asymptotically safe Quantum Einstein Gravity

Energy Technology Data Exchange (ETDEWEB)

Kofinas, Georgios [Research Group of Geometry, Dynamical Systems and Cosmology,Department of Information and Communication Systems Engineering,University of the Aegean, Karlovassi 83200, Samos (Greece); Zarikas, Vasilios [Department of Electrical Engineering, Theory Division, ATEI of Central Greece,35100 Lamia (Greece); Department of Physics, Aristotle University of Thessaloniki,54124 Thessaloniki (Greece)

2015-10-30

New general spherically symmetric solutions have been derived with a cosmological “constant” Λ as a source. This Λ term is not constant but it satisfies the properties of the asymptotically safe gravity at the ultraviolet fixed point. The importance of these solutions comes from the fact that they may describe the near to the centre region of black hole spacetimes as this is modified by the Renormalization Group scaling behaviour of the fields. The consistent set of field equations which respect the Bianchi identities is derived and solved. One of the solutions (with conventional sign of temporal-radial metric components) is timelike geodesically complete, and although there is still a curvature divergent origin, this is never approachable by an infalling massive particle which is reflected at a finite distance due to the repulsive origin. Another family of solutions (of both signatures) range from a finite radius outwards, they cannot be extended to the centre of spherical symmetry, and the curvature invariants are finite at the minimum radius.

A Dynamic Interval-Valued Intuitionistic Fuzzy Sets Applied to Pattern Recognition

Directory of Open Access Journals (Sweden)

Zhenhua Zhang

2013-01-01

Full Text Available We present dynamic interval-valued intuitionistic fuzzy sets (DIVIFS, which can improve the recognition accuracy when they are applied to pattern recognition. By analyzing the degree of hesitancy, we propose some DIVIFS models from intuitionistic fuzzy sets (IFS and interval-valued IFS (IVIFS. And then we present a novel ranking condition on the distance of IFS and IVIFS and introduce some distance measures of DIVIFS satisfying the ranking condition. Finally, a pattern recognition example applied to medical diagnosis decision making is given to demonstrate the application of DIVIFS and its distances. The simulation results show that the DIVIFS method is more comprehensive and flexible than the IFS method and the IVIFS method.

Safe medication management in specialized home healthcare - an observational study.

Science.gov (United States)

Lindblad, Marléne; Flink, Maria; Ekstedt, Mirjam

2017-08-24

Medication management is a complex, error-prone process. The aim of this study was to explore what constitutes the complexity of the medication management process (MMP) in specialized home healthcare and how healthcare professionals handle this complexity. The study is theoretically based in resilience engineering. Data were collected during the MMP at three specialized home healthcare units in Sweden using two strategies: observation of workplaces and shadowing RNs in everyday work, including interviews. Transcribed material was analysed using grounded theory. The MMP in home healthcare was dynamic and complex with unclear boundaries of responsibilities, inadequate information systems and fluctuating work conditions. Healthcare professionals adapted their everyday clinical work by sharing responsibility and simultaneously being authoritative and preserving patients' active participation, autonomy and integrity. To promote a safe MMP, healthcare professionals constantly re-prioritized goals, handled gaps in communication and information transmission at a distance by creating new bridging solutions. Trade-offs and workarounds were necessary elements, but also posed a threat to patient safety, as these interim solutions were not systematically evaluated or devised learning strategies. To manage a safe medication process in home healthcare, healthcare professionals need to adapt to fluctuating conditions and create bridging strategies through multiple parallel activities distributed over time, space and actors. The healthcare professionals' strategies could be integrated in continuous learning, while preserving boundaries of safety, instead of being more or less interim solutions. Patients' and family caregivers' as active partners in the MMP may be an underestimated resource for a resilient home healthcare.

Economics of long distance transmission, storage and distribution of heat from nuclear plants with existing and newer techniques

International Nuclear Information System (INIS)

Margen, Peter

1977-01-01

Nuclear plants can provide heat for district heating in mainly two ways. Central nuclear power plants sufficiently large to be economic as electricity producers could instead be designed for heat extraction at temperatures useful for district heating. The second promising way is to design simple low temperature reactors, so simple and safe that near urban location becomes feasible. The manner of transport distribution and storage of heat is discussed in this paper which are very important especially in the cost calculations. The economic objectives can often be attained already with conventional technigues even when transport distances are large. But newer techniques of transport promise to make even cities at greater distances from major nuclear power plants economically connectible whilst new techniques for small distribution pipes help to extend the economic distribution area to the less dense one-family house districts. (M.S.)

Does improved access to water supply by rural households enhance the concept of safe water at the point of use? A case study from deep rural South Africa.

Science.gov (United States)

Jagals, P

2006-01-01

The concept of safe water is defined by three principles: the health-related quality must be suitable, the supply/source must be accessible and the water must constantly be available in quantities sufficient for the intended use. If any one (or more) of these three elements is missing from a water services improvement programme, providing safe water is not successfully achieved. A study in a deep rural area in South Africa showed that providing small communities, using untreated river water as their only water source, with good quality water through a piped distribution system and accessible at communal taps did not fall within our parameters of safe water. The parameters for measuring the three principles were: absence of Escherichia coli in drinking water samples; accessibility by improving tap distances to within 200 m from each household; availability by assessing whether households have at least 25 L per person per day. Results show that although E. coli levels were reduced significantly, households were still consuming water with E. coli numbers at non-compliant levels. Access (distance) was improved from an average of 750 m from households to river source to an average of 120 m to new on-tap source points. This did not result in significant increases in household quantities, which on average remained around 18 L per person per day.

Making Distance Visible: Assembling Nearness in an Online Distance Learning Programme

Science.gov (United States)

Ross, Jen; Gallagher, Michael Sean; Macleod, Hamish

2013-01-01

Online distance learners are in a particularly complex relationship with the educational institutions they belong to (Bayne, Gallagher, & Lamb, 2012). For part-time distance students, arrivals and departures can be multiple and invisible as students take courses, take breaks, move into independent study phases of a programme, find work or…

Multiphase volume-preserving interface motions via localized signed distance vector scheme

Czech Academy of Sciences Publication Activity Database

Muhammad, R. Z.; Švadlenka, Karel

2015-01-01

Roč. 8, č. 5 (2015), s. 969-988 ISSN 1937-1632 Institutional support: RVO:67985840 Keywords : multiphase mean curvature flow * vector-valued signed distance * volume preservation Subject RIV: BA - General Mathematics Impact factor: 0.737, year: 2015 http://www.aimsciences.org/journals/displayArticlesnew.jsp?paperID=11386

Reliability and accuracy of Cooper's test in male long distance runners

Directory of Open Access Journals (Sweden)

J.R. Alvero-Cruz

2017-06-01

Conclusions: All together, our results may confirm a good accuracy and reliability of Cooper's test in amateur long distance runners. Also, improvements or impairment lower than 52.2 m must not be associated with exercise training or retraining, since they are below the values of intra-subject reliability.

Breastfeeding FAQs: Safely Storing Breast Milk

Science.gov (United States)

... Search English Español Breastfeeding FAQs: Safely Storing Breast Milk KidsHealth / For Parents / Breastfeeding FAQs: Safely Storing Breast ... may have. How do I store my breast milk? You can freeze and/or refrigerate your pumped ( ...

Safe shutdown analysis for submerged equipment inside containment

International Nuclear Information System (INIS)

Song, Dong Soo; Lee, Seung Chan; Yoon, Duk Joo; Ha, Sang Jun

2017-01-01

The purpose of the paper is to analyze internal flooding effects on the submerged safety-related components inside containment building. Safe shutdown analysis has been performed based on the criteria, assumptions and guideline provided in ANSI/ANS-56.11-1988 and ANSI/ANS-58.11-1988. Flooding can be postulated from a failure of several systems located inside the containment. Loss of coolant accident (LOCA), Feed water line break (FWLB), and other pipe breaks/cracks are assumed. The worst case flooding scenario is a large break LOCA. The maximum flood level for a large break LOCA is calculated based on the combined inventory of the reactor coolant system, the three accumulators, the boron injection tank (BIT), the chemical additive tank (CAT), and the refueling water storage tank (RWST) flooding the containment. The maximum flood level that could occur from all of the water which is available in containment is 2.3 m from the base elevation. A detailed flooding analysis for the components has been performed to demonstrate that internal flooding resulting from a postulated initiating event does not cause the loss of equipment required to achieve and maintain safe shutdown of the plant, emergency core cooling capability, or equipment whose failure could result in unacceptable offsite radiological consequences. The flood height can be calculated as h = (dh/dt) x (t-t 0 ) + h 0 , where h = time dependent flood height and subscript 0 means the initial value and height slope dh/dt. In summary, the submerged components inside containment are acceptable because they complete the mission of safety injection (SI) prior to submeregency or have no safe shutdown function including containment isolation during an accident. (author)

Curiosity's Autonomous Surface Safing Behavior Design

Science.gov (United States)

Neilson, Tracy A.; Manning, Robert M.

2013-01-01

The safing routines on all robotic deep-space vehicles are designed to put the vehicle in a power and thermally safe configuration, enabling communication with the mission operators on Earth. Achieving this goal is made a little more difficult on Curiosity because the power requirements for the core avionics and the telecommunication equipment exceed the capability of the single power source, the Multi-Mission Radioisotope Thermoelectric Generator. This drove the system design to create an operational mode, called "sleep mode", where the vehicle turns off most of the loads in order to charge the two Li-ion batteries. The system must keep the vehicle safe from over-heat and under-heat conditions, battery cell failures, under-voltage conditions, and clock failures, both while the computer is running and while the system is sleeping. The other goal of a safing routine is to communicate. On most spacecraft, this simply involves turning on the receiver and transmitter continuously. For Curiosity, Earth is above the horizon only a part of the day for direct communication to the Earth, and the orbiter overpass opportunities only occur a few times a day. The design must robustly place the Rover in a communicable condition at the correct time. This paper discusses Curiosity's autonomous safing behavior and describes how the vehicle remains power and thermally safe while sleeping, as well as a description of how the Rover communicates with the orbiters and Earth at specific times.

Steiner Distance in Graphs--A Survey

OpenAIRE

Mao, Yaping

2017-01-01

For a connected graph $G$ of order at least $2$ and $S\\subseteq V(G)$, the \\emph{Steiner distance} $d_G(S)$ among the vertices of $S$ is the minimum size among all connected subgraphs whose vertex sets contain $S$. In this paper, we summarize the known results on the Steiner distance parameters, including Steiner distance, Steiner diameter, Steiner center, Steiner median, Steiner interval, Steiner distance hereditary graph, Steiner distance stable graph, average Steiner distance, and Steiner ...

Neutral Hydrogen Absorption Toward XTE J1810-197: the Distance to a Radio-Emitting Magnetar

OpenAIRE

Minter, Anthony H.; Camilo, Fernando; Ransom, Scott M.; Halpern, Jules P.; Zimmerman, Neil

2007-01-01

We have used the Green Bank Telescope to measure HI absorption against the anomalous X-ray pulsar XTE J1810-197. Assuming a flat rotation curve, we find that XTE J1810-197 is located at a distance of 3.4(+0.5,-0.7) kpc. For a rotation curve that incorporates a model of the Galactic bar, we obtain a distance of 4.0(+0.3,-0.8) kpc. Using a rotation curve that incorporates a model of the Galactic bar and the spiral arms of the Galaxy, the distance is 3.7(+/-0.6) kpc. These values are consistent ...

Theoretical Principles of Distance Education.

Science.gov (United States)

Keegan, Desmond, Ed.

This book contains the following papers examining the didactic, academic, analytic, philosophical, and technological underpinnings of distance education: "Introduction"; "Quality and Access in Distance Education: Theoretical Considerations" (D. Randy Garrison); "Theory of Transactional Distance" (Michael G. Moore);…

THE DISTANCE TO M104

Energy Technology Data Exchange (ETDEWEB)

McQuinn, Kristen B. W. [University of Texas at Austin, McDonald Observatory, 2515 Speedway, Stop C1400 Austin, TX 78712 (United States); Skillman, Evan D. [Minnesota Institute for Astrophysics, School of Physics and Astronomy, 116 Church Street, SE, University of Minnesota, Minneapolis, MN 55455 (United States); Dolphin, Andrew E. [Raytheon Company, 1151 E. Hermans Road, Tucson, AZ 85756 (United States); Berg, Danielle [Center for Gravitation, Cosmology and Astrophysics, Department of Physics, University of Wisconsin Milwaukee, 1900 East Kenwood Boulevard, Milwaukee, WI 53211 (United States); Kennicutt, Robert, E-mail: kmcquinn@astro.as.utexas.edu [Institute for Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom)

2016-11-01

M104 (NGC 4594; the Sombrero galaxy) is a nearby, well-studied elliptical galaxy included in scores of surveys focused on understanding the details of galaxy evolution. Despite the importance of observations of M104, a consensus distance has not yet been established. Here, we use newly obtained Hubble Space Telescope optical imaging to measure the distance to M104 based on the tip of the red giant branch (TRGB) method. Our measurement yields the distance to M104 to be 9.55 ± 0.13 ± 0.31 Mpc equivalent to a distance modulus of 29.90 ± 0.03 ± 0.07 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian maximum likelihood technique that reduces measurement uncertainties. The most discrepant previous results are due to Tully–Fisher method distances, which are likely inappropriate for M104 given its peculiar morphology and structure. Our results are part of a larger program to measure accurate distances to a sample of well-known spiral galaxies (including M51, M74, and M63) using the TRGB method.

The Distance to M51

Science.gov (United States)

McQuinn, Kristen. B. W.; Skillman, Evan D.; Dolphin, Andrew E.; Berg, Danielle; Kennicutt, Robert

2016-07-01

Great investments of observing time have been dedicated to the study of nearby spiral galaxies with diverse goals ranging from understanding the star formation process to characterizing their dark matter distributions. Accurate distances are fundamental to interpreting observations of these galaxies, yet many of the best studied nearby galaxies have distances based on methods with relatively large uncertainties. We have started a program to derive accurate distances to these galaxies. Here we measure the distance to M51—the Whirlpool galaxy—from newly obtained Hubble Space Telescope optical imaging using the tip of the red giant branch method. We measure the distance modulus to be 8.58 ± 0.10 Mpc (statistical), corresponding to a distance modulus of 29.67 ± 0.02 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian Maximum Likelihood technique that reduces measurement uncertainties. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained from the Data Archive at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555.

Are contemporary tourists consuming distance?

DEFF Research Database (Denmark)

Larsen, Gunvor Riber

2012. Background The background for this research, which explores how tourists represent distance and whether or not distance can be said to be consumed by contemporary tourists, is the increasing leisure mobility of people. Travelling for the purpose of visiting friends and relatives is increasing...... of understanding mobility at a conceptual level, and distance matters to people's manifest mobility: how they travel and how far they travel are central elements of their movements. Therefore leisure mobility (indeed all mobility) is the activity of relating across distance, either through actual corporeal...... metric representation. These representations are the focus for this research. Research Aim and Questions The aim of this research is thus to explore how distance is being represented within the context of leisure mobility. Further the aim is to explore how or whether distance is being consumed...

Terminology report respect distance. The Use of the term respect distance in Posiva and SKB

International Nuclear Information System (INIS)

Lampinen, H.

2007-09-01

The term respect distance is used in some key publications of the Finnish Nuclear Waste Management Company, Posiva, and the Swedish Nuclear Waste Management Company, SKB (Svensk Kaernbrenslehantering). Posiva and SKB researchers use the same terms in their reports, and it is acknowledged that the terms used by both companies are not used in the same way, though the differences are often subtle. This report is a literature study of the term 'respect distance' and the terms immediately associated to it. Vital terms related to the respect distance and issues concerning the use of scale concepts in Posiva and SKB are gathered in the end of report. Posiva's respect distances consider the seismic, hydrological and mechanical properties of the deterministic deformation zones as important issues that constitute a risk for longterm safety. These requirements for respect distances are an interpretation of STUK's YVL 8.4 Guide. At present, Posiva's criteria regarding respect distances follow the instructions given in the Host Rock Classification system (HRC), whereas the size of a deformation zone to which respect distances are applied vary from the regional to local major and minor. This and other criteria that are given for respect distances may, however, change in the near future as Posiva's Rock Suitability Criteria (RSC) programme proceeds. SKB's considerations of respect distances acknowledge that the hydraulic and mechanical aspects of a deformation zone have an effect on the respect distance. However, the seismic risk is considered to overshadow the other effects on a regional scale. The respect distance defined for a deformation zone is coupled with the size of a fracture where secondary slip could occur. In the safety assessment it is assumed that this fracture cuts a deposition hole location. In SKB the respect distance is determined for regional and local major deformation zones. The trace length of such a zone is defined as being ≥ 3 km. For deformation zones

Removing Hair Safely

Science.gov (United States)

... For Consumers Home For Consumers Consumer Updates Removing Hair Safely Share Tweet Linkedin Pin it More sharing ... related to common methods of hair removal. Laser Hair Removal In this method, a laser destroys hair ...

On perturbation theory for distance dependent statistics.

Energy Technology Data Exchange (ETDEWEB)

Mashkevich, S V

1994-12-31

It is known that perturbation theory for anyons has to be modified near Bose statistics in order to get correct finite results. For ``distance dependent statistics`` or anyons with smeared flux tubes, perturbation theory is in principle applicable directly but gives results which hold for too small values of the statistical parameter and, in particular, are not valid as the flux tube radius tends to zero. In this paper we discuss the way to modify perturbation theory for this situation, which allows to obtain the appropriate results. (author). 6 refs.

Distance and Azimuthal Dependence of Ground‐Motion Variability for Unilateral Strike‐Slip Ruptures

KAUST Repository

Vyas, Jagdish Chandra

2016-06-21

We investigate near‐field ground‐motion variability by computing the seismic wavefield for five kinematic unilateral‐rupture models of the 1992 Mw 7.3 Landers earthquake, eight simplified unilateral‐rupture models based on the Landers event, and a large Mw 7.8 ShakeOut scenario. We include the geometrical fault complexity and consider different 1D velocity–density profiles for the Landers simulations and a 3D heterogeneous Earth structure for the ShakeOut scenario. For the Landers earthquake, the computed waveforms are validated using strong‐motion recordings. We analyze the simulated ground‐motion data set in terms of distance and azimuth dependence of peak ground velocity (PGV). Our simulations reveal that intraevent ground‐motion variability Graphic is higher in close distances to the fault (<20  km) and decreases with increasing distance following a power law. This finding is in stark contrast to constant sigma‐values used in empirical ground‐motion prediction equations. The physical explanation of a large near‐field Graphic is the presence of strong directivity and rupture complexity. High values of Graphic occur in the rupture‐propagation direction, but small values occur in the direction perpendicular to it. We observe that the power‐law decay of Graphic is primarily controlled by slip heterogeneity. In addition, Graphic, as function of azimuth, is sensitive to variations in both rupture speed and slip heterogeneity. The azimuth dependence of the ground‐motion mean μln(PGV) is well described by a Cauchy–Lorentz function that provides a novel empirical quantification to model the spatial dependency of ground motion. Online Material: Figures of slip distributions, residuals to ground‐motion prediction equations (GMPEs), distance and azimuthal dependence, and directivity predictor of ground‐motion variability for different source models.

A study of the normal interpedicular distance of the spine in Korean teenagers (Estimation of normal range by roentgenographic measurement)

International Nuclear Information System (INIS)

Lee, Myung Uk

1979-01-01

The radiological measurement of the interpedicular disease using a routine antero-posterior view of the spine gives important clinical criteria in evaluation of the intraspinal tumor and stenosis of the spinal canal, and aids for diagnosis of the lesions. In 1934 Elsberg and Dyke reported values of interpedicular distance as determined on roentgenograms for spine of white adult, and in 1968 Song prepared normal values of interpedicular distance for Korean adult. The present investigation was undertaken to provide normal interpedicular distance of Korean teenagers. The author observed the antero-posterior films of the spine of 200 normal teenagers which were composed of 100 male and 100 female. The normal values of the interpedicular distance of Korean teenagers were obtained, as well as 90% tolerance range for clinical use. In this statistical analysis, there were noted significant differences between male and female, and each age groups. It was observed that average male measurement were consistently larger than female by about 1 mm and the growth of the spinal canal appeared to be continued.

[Travel time and distances to Norwegian out-of-hours casualty clinics].

Science.gov (United States)

Raknes, Guttorm; Morken, Tone; Hunskår, Steinar

2014-11-01

Geographical factors have an impact on the utilisation of out-of-hours services. In this study we have investigated the travel distance to out-of-hours casualty clinics in Norwegian municipalities in 2011 and the number of municipalities covered by the proposed recommendations for secondary on-call arrangements due to long distances. We estimated the average maximum travel times and distances in Norwegian municipalities using a postcode-based method. Separate analyses were performed for municipalities with a single, permanently located casualty clinic. Altogether 417 out of 430 municipalities were included. We present the median value of the maximum travel times and distances for the included municipalities. The median maximum average travel distance for the municipalities was 19 km. The median maximum average travel time was 22 minutes. In 40 of the municipalities (10 %) the median maximum average travel time exceeded 60 minutes, and in 97 municipalities (23 %) the median maximum average travel time exceeded 40 minutes. The population of these groups comprised 2 % and 5 % of the country's total population respectively. For municipalities with permanent emergency facilities(N = 316), the median average flight time 16 minutes and median average distance 13 km.. In many municipalities, the inhabitants have a long average journey to out-of-hours emergency health services, but seen as a whole, the inhabitants of these municipalities account for a very small proportion of the Norwegian population. The results indicate that the proposed recommendations for secondary on-call duty based on long distances apply to only a small number of inhabitants. The recommendations should therefore be adjusted and reformulated to become more relevant.

Distance learning

Directory of Open Access Journals (Sweden)

Katarina Pucelj

2006-12-01

Full Text Available I would like to underline the role and importance of knowledge, which is acquired by individuals as a result of a learning process and experience. I have established that a form of learning, such as distance learning definitely contributes to a higher learning quality and leads to innovative, dynamic and knowledgebased society. Knowledge and skills enable individuals to cope with and manage changes, solve problems and also create new knowledge. Traditional learning practices face new circumstances, new and modern technologies appear, which enable quick and quality-oriented knowledge implementation. The centre of learning process at distance learning is to increase the quality of life of citizens, their competitiveness on the workforce market and ensure higher economic growth. Intellectual capital is the one, which represents the biggest capital of each society and knowledge is the key factor for succes of everybody, who are fully aware of this. Flexibility, openness and willingness of people to follow new IT solutions form suitable environment for developing and deciding to take up distance learning.

Safe SUSY

DEFF Research Database (Denmark)

Bajc, Borut; Dondi, Nicola Andrea; Sannino, Francesco

2018-01-01

We investigate the short distance fate of distinct classes of not asymptotically free supersymmetric gauge theories. Examples include super QCD with two adjoint fields and generalised superpotentials, gauge theories without superpotentials and with two types of matter representation and semi-simp...

Developing Safe Schools Partnerships with Law Enforcement

Science.gov (United States)

Rosiak, John

2009-01-01

Safe schools are the concern of communities throughout the world. If a school is safe, and if children feel safe, students "are better able to learn. But what are the steps to make" this happen? First, it is important to understand the problem: What are the threats to school safety? These include crime-related behaviors that find their way to…

Variations in plasma wave intensity with distance along the electron foreshock boundary at Venus

Science.gov (United States)

Crawford, G. K.; Strangeway, R. J.; Russell, C. T.

1991-01-01

Plasma waves are observed in the solar wind upstream of the Venus bow shock by the Pioneer Venus Orbiter. These wave signatures occur during periods when the interplanetary magnetic field through the spacecraft position intersects the bow shock, thereby placing the spacecraft in the foreshock region. Wave intensity is analyzed as a function of distance along the electron foreshock boundary. It is found that the peak wave intensity may increase along the foreshock boundary from the tangent point to a maximum value at several Venus radii, then decrease in intensity with subsequent increase in distance. These observations could be associated with the instability process: the instability of the distribution function increasing with distance from the tangent point to saturation at the peak. Thermalization of the beam for distances beyond this point could reduce the distribution function instability resulting in weaker wave signatures.

Navigating Distance and Traditional Higher Education: Online faculty experiences

Directory of Open Access Journals (Sweden)

Alice G. Yick

2005-07-01

Full Text Available The academic culture of higher educational institutions is characterized by specific pedagogical philosophies, assumptions about rewards and incentives, and values about how teaching is delivered. In many academic settings, however, the field of distance education has been viewed as holding marginal status. Consequently, the goal of this qualitative study was to explore faculty members’ experiences in a distance education, online university while simultaneously navigating within a traditional environment of higher education. A total of 28 faculty members participated in a threaded, asynchronous discussion board that resembled a focus group. Participants discussed perceptions about online teaching, working in an institution without a traditional tenure system, and the role of research in distance education. Findings indicated that online teaching is still regarded as less credible; however, participants also noted how this perception is gradually changing. Several benchmarks of legitimacy were identified for online universities to adopt in order to be viewed as credible. The issue of tenure still remains highly debated, although some faculty felt that tenure will be less crucial in the future. Finally, recommendations regarding attitudinal shifts within academic circles are described with particular attention to professional practice, program development, and policy decision-making in academia.

Correlation Between Cometary Gas/Dust Ratios and Heliocentric Distance

Science.gov (United States)

Harrington, Olga; Womack, Maria; Lastra, Nathan

2017-10-01

We compiled CO-based gas/dust ratios for several comets out to heliocentric distances, rh, of 8 au to probe whether there is a noticeable change in comet behavior over the range that water-ice sublimation starts. Previously, gas/dust ratios were calculated for an ensemble of comets using Q(CO2)/efp values derived from infrared measurements, which showed that the gas/dust ratio follows a rh-2 within 4 AU, but is flat at greater distances (Bauer et al. 2015). Our project focuses on gas/dust ratios for which CO is assumed to be the dominant gas, in order to test whether similar breaks in slope occur for CO. The gas/dust ratios were calculated from measurements of CO production rates (mostly from millimeter-wavelength spectroscopy) and reflected sunlight of comets (mostly via reported visual magnitudes of dusty comets). We present our new CO-based gas/dust ratios at different heliocentric distances, compare them to existing CO2-based gas/dust ratios, and discuss implications for CO-driven and CO2-driven activity. We discuss O.H. acknowledges support from the Hartmann Student Travel Grant program. M.W. acknowledges support from NSF grant AST-1615917.

Fast Exact Euclidean Distance (FEED): A new class of adaptable distance transforms

NARCIS (Netherlands)

Schouten, Theo E.; van den Broek, Egon

2014-01-01

A new unique class of foldable distance transforms of digital images (DT) is introduced, baptized: Fast Exact Euclidean Distance (FEED) transforms. FEED class algorithms calculate the DT starting directly from the definition or rather its inverse. The principle of FEED class algorithms is

Fast Exact Euclidean Distance (FEED) : A new class of adaptable distance transforms

NARCIS (Netherlands)

Schouten, Theo E.; van den Broek, Egon L.

2014-01-01

A new unique class of foldable distance transforms of digital images (DT) is introduced, baptized: Fast Exact Euclidean Distance (FEED) transforms. FEED class algorithms calculate the DT startingdirectly from the definition or rather its inverse. The principle of FEED class algorithms is introduced,

It's Safe to Be Smart: Strategies for Creating a Supportive Classroom Environment

Science.gov (United States)

Hébert, Thomas P.; Corcoran, Jamie A.; Coté, John M.; Ene, Mihaela C.; Leighton, Elizabeth A.; Holmes, Ashley M.; Padula, Diane D.

2014-01-01

Gifted teenagers in middle and high school benefit from classroom environments that support their social and emotional development. Teachers of gifted adolescents may create classroom environments in which young people know it is safe to be smart and where they feel valued and respected for their intellect, creativity, and passions. By utilizing…

Distance covariance for stochastic processes

DEFF Research Database (Denmark)

Matsui, Muneya; Mikosch, Thomas Valentin; Samorodnitsky, Gennady

2017-01-01

The distance covariance of two random vectors is a measure of their dependence. The empirical distance covariance and correlation can be used as statistical tools for testing whether two random vectors are independent. We propose an analog of the distance covariance for two stochastic processes...

Estimation of distance error by fuzzy set theory required for strength determination of HDR (192)Ir brachytherapy sources.

Science.gov (United States)

Kumar, Sudhir; Datta, D; Sharma, S D; Chourasiya, G; Babu, D A R; Sharma, D N

2014-04-01

Verification of the strength of high dose rate (HDR) (192)Ir brachytherapy sources on receipt from the vendor is an important component of institutional quality assurance program. Either reference air-kerma rate (RAKR) or air-kerma strength (AKS) is the recommended quantity to specify the strength of gamma-emitting brachytherapy sources. The use of Farmer-type cylindrical ionization chamber of sensitive volume 0.6 cm(3) is one of the recommended methods for measuring RAKR of HDR (192)Ir brachytherapy sources. While using the cylindrical chamber method, it is required to determine the positioning error of the ionization chamber with respect to the source which is called the distance error. An attempt has been made to apply the fuzzy set theory to estimate the subjective uncertainty associated with the distance error. A simplified approach of applying this fuzzy set theory has been proposed in the quantification of uncertainty associated with the distance error. In order to express the uncertainty in the framework of fuzzy sets, the uncertainty index was estimated and was found to be within 2.5%, which further indicates that the possibility of error in measuring such distance may be of this order. It is observed that the relative distance li estimated by analytical method and fuzzy set theoretic approach are consistent with each other. The crisp values of li estimated using analytical method lie within the bounds computed using fuzzy set theory. This indicates that li values estimated using analytical methods are within 2.5% uncertainty. This value of uncertainty in distance measurement should be incorporated in the uncertainty budget, while estimating the expanded uncertainty in HDR (192)Ir source strength measurement.

Lateral chest radiographic findings in lobar collapse of the left lung : the distance between both upper lobe bronchi

International Nuclear Information System (INIS)

Chin, G. H.; Sung, D. W.; Yoon, Y.; Kim, H. C.

1996-01-01

To evaluate the distance between both upper love bronchi on lateral radiographs and its change in left upper or lower lobe collapse. 144 true lateral radiographs were analyzed on which both upper lobe bronchi were clearly identified. They included 116 normal cases, 11 cases of left upper lobe collapse, 13 of left lower lobe collapse, and 4 cases of left lower lobe lobectomy. Line A was drawn parallel to the vertebral end plate through the upper margin of the lift upper lobe bronchus. Line B was drawn parallel to line A through the upper margin of the right upper love bronchus. The shortest distance between line A and line B was measured as the distance between both upper lobe bronchi. In normal cases, the mean value of the distance was 2.19 cm ± S.D. 0.37 cm on right and on right and 2.16 cm ± S.D. 0.40 cm on left lateral radiographs ; these results were not significantly different(P=0.79). In cases of collapse, the mean value of the distance was 0.43 cm ± S.D. 0.99 cm in upper lobe collapse and 3.56 cm ± S.D. 0.72 cm in lower lobe collapse, results which were significantly different from those of normal cases(p<0.01). In eight cases(73%) of left upper lobe collapse, the distance was less than 1 cm and in 10 cases(77%) of left lower lobe collapse, the distance was more than 3 cm. The distance between both upper lobe bronchi varies markedly in case of lobar collapse. A distance of less than 1 cm suggests collapse of the left upper lobe and a distance more than 3 cm suggests collapse of the left lower lobe

Managing Time, Workload and Costs in Distance Education: Findings from a Literature Review of "Distances et Médiations des Savoirs" (Formerly "Distances et Savoirs")

Science.gov (United States)

Moeglin, Pierre; Vidal, Martine

2015-01-01

The purpose of this review, spanning over 12 years of publication of "Distances et Médiations des Savoirs" ("DMS"), formerly "Distance et Savoirs" ("DMS") (2003-2014), is guided by the question why and how French-speaking researchers addressed the issues of time, workload and costs in distance learning, and…

Safe use of ionizing radiations

Energy Technology Data Exchange (ETDEWEB)

1973-01-01

Based on the ''Code of Practice for the protection of persons against ionizing radiations arising from medical and dental use'' (CIS 74-423), this handbook shows how hospital staff can avoid exposing themselves and others to these hazards. It is designed particularly for junior and student nurses. Contents: ionizing radiations, their types and characteristics; their uses and dangers; basic principles in their safe use; safe use in practice; explanation of terms.

Staying Safe in the Water

Centers for Disease Control (CDC) Podcasts

2008-05-15

In this podcast, Dr. Julie Gilchrist, a pediatrician and medical epidemiologist from CDC’s Injury Center, talks about staying safe in the water. Tips are for all audiences, with a focus on preventing drownings and keeping children safe in and around the pool, lake, or ocean.  Created: 5/15/2008 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 5/19/2008.

Sexual practices, myths and misconceptions among long distance truck drivers in North India.

Science.gov (United States)

Sawal, N; Hans, G D R; Verma, G

2016-07-01

Long distance truck drivers and helpers constitute a high risk group for human immunodeficiency virus /acquired immune deficiency syndrome (HIV/AIDS). Despite increasing awareness of HIV/AIDS and safe sex practices, they still have a high incidence of new cases of HIV. This study carried out at an ART (anti-retroviral treatment) centre in North India aimed to evaluate the sexual myths and misconceptions prevalent among long distance drivers and helpers. This was a retrospective study carried out at apex ART centre. Data were collected retrospectively from ART records of 129 long distance Truck drivers and 68 helpers. Details of socio-demographic characteristics, contact with commercial sex workers (CSW'S), pattern of condom usage with CSW'S and factors influencing it were studied. We found that a significant number of drivers and helpers had sexual contact with CSW's and out of these, 30% of drivers and 50% of helpers reported not using condoms and instead resorting to methods like washing genitalia after sex with battery water/urine to avoid getting HIV. There was no significant relationship between pattern of condom usage and educational status, marital status and age. We also found that certain myths like sex with young CSW's was less likely to cause sexually transmitted diseases (STD's) and HIV were also widespread. Owing to continuing prevalence of such sexual myths, long distance truck drivers and helpers do not use condoms while having sex with CSW's as they feel that they can enjoy sex with CSW's and still stay protected against STD's/HIV. It is imperative that this battery water/urine antiseptic myth be specifically targeted for better HIV control in this high risk group. © The Author 2015. Published by Oxford University Press on behalf of the Association of Physicians. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Connecting long distance: semantic distance in analogical reasoning modulates frontopolar cortex activity.

Science.gov (United States)

Green, Adam E; Kraemer, David J M; Fugelsang, Jonathan A; Gray, Jeremy R; Dunbar, Kevin N

2010-01-01

Solving problems often requires seeing new connections between concepts or events that seemed unrelated at first. Innovative solutions of this kind depend on analogical reasoning, a relational reasoning process that involves mapping similarities between concepts. Brain-based evidence has implicated the frontal pole of the brain as important for analogical mapping. Separately, cognitive research has identified semantic distance as a key characteristic of the kind of analogical mapping that can support innovation (i.e., identifying similarities across greater semantic distance reveals connections that support more innovative solutions and models). However, the neural substrates of semantically distant analogical mapping are not well understood. Here, we used functional magnetic resonance imaging (fMRI) to measure brain activity during an analogical reasoning task, in which we parametrically varied the semantic distance between the items in the analogies. Semantic distance was derived quantitatively from latent semantic analysis. Across 23 participants, activity in an a priori region of interest (ROI) in left frontopolar cortex covaried parametrically with increasing semantic distance, even after removing effects of task difficulty. This ROI was centered on a functional peak that we previously associated with analogical mapping. To our knowledge, these data represent a first empirical characterization of how the brain mediates semantically distant analogical mapping.

Back mobility and interincisor distance ranges in racially diverse North American healthy children and relationship to generalized hypermobility

Directory of Open Access Journals (Sweden)

Woolston Sophie L

2012-06-01

Full Text Available Abstract Background Given the dearth of normal values, we conducted a cross-sectional study of North American racially diverse children to determine normal values of interincisor distance and lower spine flexion. Methods Demographs of 307 children aged 5–17 seeking treatment emergency care were obtained along with interincisor distance measured by incisor tooth-to-tooth gap, lower spine flexion measured by the Schober and modified Schober measurements, popliteal extension, hypermobility (Beighton score, weight and height. Results Normal range of motion values for the Schober was a mean of 14.3 cm (95% confidence interval (CI was 11.2 to 17. cm and the mean modified Schober’s was 21.6 cm (95% CI 18.4 cm to 24.8 cm. Retained lumbar lordosis on forward flexion was observed in 33%. Back mobility was associated with body mass index (BMI, popliteal angle, and Beighton score but not sex, race or retained lordosis. The mean interincisor distance measurement was 47 mm (95% CI 35 mm to 60 mm and was associated with height and BMI but not sex, race, or Beighton score. Conclusion Normal values for lower back range of motion and interincisor distance were obtained which are needed in pediatric rheumatologic clinics and do not significantly vary as to race or sex. Retained lordosis on forward flexion is a normal variant. Hamstring tightness, hypermobility and BMI need to be considered when ascertaining back mobility.

A joint-constraint model for human joints using signed distance-fields

DEFF Research Database (Denmark)

Engell-Nørregård, Morten Pol; Abel, Sarah Maria Niebe; Erleben, Kenny

2012-01-01

We present a local joint-constraint model for a single joint which is based on distance fields. Our model is fast, general, and well suited for modeling human joints. In this work, we take a geometric approach and model the geometry of the boundary of the feasible region, i.e., the boundary of all...... allowed poses. A region of feasible poses can be built by embedding motion captured data points in a signed distance field. The only assumption is that the feasible poses form a single connected set of angular values. We show how signed distance fields can be used to generate fast and general joint......-joint dependencies, or joints with more than three degrees of freedom. The resolution of the joint-constraints can be tweaked individually for each degree of freedom, which can be used to optimize memory usage. We perform a comparative study of the key-properties of various joint-constraint models, as well...

Equivalence of massive propagator distance and mathematical distance on graphs

International Nuclear Information System (INIS)

Filk, T.

1992-01-01

It is shown in this paper that the assignment of distance according to the massive propagator method and according to the mathematical definition (length of minimal path) on arbitrary graphs with a bound on the degree leads to equivalent large scale properties of the graph. Especially, the internal scaling dimension is the same for both definitions. This result holds for any fixed, non-vanishing mass, so that a really inequivalent definition of distance requires the limit m → 0

Study on estimation of evacuation distances for nuclear emergency

International Nuclear Information System (INIS)

Sato, Sohei; Homma, Toshimitsu

2005-09-01

Japan Atomic Energy Research Institute (JAERI) have conducted the analytical studies on the Probabilistic Safety Assessment (PSA), the severe accidents, and the optimization of protective actions. Based on the results of these studies, JAERI are investigating the method for taking urgent protective actions more reasonably. If an accident occurs in a nuclear power plant (NPP), early protective actions are carried out. To implement these actions more effectively, emergency preparedness and emergency planning are important, and especially prompt evacuation is expected to reduce a large amount of radiation exposures. To examine the effect of early protective measures by using a PSA method, estimation of the parameter uncertainty related in the time for early protective actions is needed. For this purpose, we have developed an analytical method for urgent protective actions using geographic information, and estimated the movement distance based on gathering points arrangement an population distribution. For this analysis, we used the gathering point data shown on each regional plans for disaster prevention which will be used in actual emergency situation and targeted the population inside Emergency Planning Zone (EPZ). By applying this method for the existing sixteen commercial NPP sites, we estimated the average value and distribution of the movement distance for each sites. This report provides a brief description of the method for estimating the movement distance, input data for this analysis, and the result. Moreover, the problem on the method of evacuation distance analysis and usefulness of this method for emergency planning were discussed. (author)

Safe operating envelope

Energy Technology Data Exchange (ETDEWEB)

Oliva, N [Ontario Hydro, Toronto, ON (Canada)

1997-12-01

Safe Operating Envelope is described representing: The outer bound of plant conditions within which day-to-day plant operation must be maintained in order to comply with regulatory requirements, associated safety design criteria and corporate nuclear safety goals. Figs.

Safe operating envelope

International Nuclear Information System (INIS)

Oliva, N.

1997-01-01

Safe Operating Envelope is described representing: The outer bound of plant conditions within which day-to-day plant operation must be maintained in order to comply with regulatory requirements, associated safety design criteria and corporate nuclear safety goals. Figs

Understanding the joint effects of Cognitive Distance and Competition on Pioneering Innovations through the Dynamics between Suppliers and Competitors

DEFF Research Database (Denmark)

Li, Ying; Salomo, Søren

2010-01-01

the individual effects of cognitive distance and competition on innovation but also try to understand their joint effects in a coherent way based on a resource-based view and through the product life cycle as a link of cognitive distance and competition. Competition is multidimensional and innovation has many......The relationships between cognitive distance, competition and innovation have drawn great attention from economists and management researchers. First, with regard to cognitive distance and innovation, it is suggested that a moderate level of cognitive distance between firms is associated...... with an optimal innovation performance, because a too small cognitive distance provides the focal innovating firm with too little novelty value, while a too large cognitive distance makes it difficult for firms to learn and collaborate with each other. Second, the empirical evidence for the relationship between...

Language distance and tree reconstruction

International Nuclear Information System (INIS)

Petroni, Filippo; Serva, Maurizio

2008-01-01

Languages evolve over time according to a process in which reproduction, mutation and extinction are all possible. This is very similar to haploid evolution for asexual organisms and for the mitochondrial DNA of complex ones. Exploiting this similarity, it is possible, in principle, to verify hypotheses concerning the relationship among languages and to reconstruct their family tree. The key point is the definition of the distances among pairs of languages in analogy with the genetic distances among pairs of organisms. Distances can be evaluated by comparing grammar and/or vocabulary, but while it is difficult, if not impossible, to quantify grammar distance, it is possible to measure a distance from vocabulary differences. The method used by glottochronology computes distances from the percentage of shared 'cognates', which are words with a common historical origin. The weak point of this method is that subjective judgment plays a significant role. Here we define the distance of two languages by considering a renormalized edit distance among words with the same meaning and averaging over the two hundred words contained in a Swadesh list. In our approach the vocabulary of a language is the analogue of DNA for organisms. The advantage is that we avoid subjectivity and, furthermore, reproducibility of results is guaranteed. We apply our method to the Indo-European and the Austronesian groups, considering, in both cases, fifty different languages. The two trees obtained are, in many respects, similar to those found by glottochronologists, with some important differences as regards the positions of a few languages. In order to support these different results we separately analyze the structure of the distances of these languages with respect to all the others

Language distance and tree reconstruction

Science.gov (United States)

Petroni, Filippo; Serva, Maurizio

2008-08-01

Languages evolve over time according to a process in which reproduction, mutation and extinction are all possible. This is very similar to haploid evolution for asexual organisms and for the mitochondrial DNA of complex ones. Exploiting this similarity, it is possible, in principle, to verify hypotheses concerning the relationship among languages and to reconstruct their family tree. The key point is the definition of the distances among pairs of languages in analogy with the genetic distances among pairs of organisms. Distances can be evaluated by comparing grammar and/or vocabulary, but while it is difficult, if not impossible, to quantify grammar distance, it is possible to measure a distance from vocabulary differences. The method used by glottochronology computes distances from the percentage of shared 'cognates', which are words with a common historical origin. The weak point of this method is that subjective judgment plays a significant role. Here we define the distance of two languages by considering a renormalized edit distance among words with the same meaning and averaging over the two hundred words contained in a Swadesh list. In our approach the vocabulary of a language is the analogue of DNA for organisms. The advantage is that we avoid subjectivity and, furthermore, reproducibility of results is guaranteed. We apply our method to the Indo-European and the Austronesian groups, considering, in both cases, fifty different languages. The two trees obtained are, in many respects, similar to those found by glottochronologists, with some important differences as regards the positions of a few languages. In order to support these different results we separately analyze the structure of the distances of these languages with respect to all the others.

An Automated Safe-to-Mate (ASTM) Tester

Science.gov (United States)

Nguyen, Phuc; Scott, Michelle; Leung, Alan; Lin, Michael; Johnson, Thomas

2013-01-01

Safe-to-mate testing is a common hardware safety practice where impedance measurements are made on unpowered hardware to verify isolation, continuity, or impedance between pins of an interface connector. A computer-based instrumentation solution has been developed to resolve issues. The ASTM is connected to the circuit under test, and can then quickly, safely, and reliably safe-to-mate the entire connector, or even multiple connectors, at the same time.

Interactive Distance Learning in Connecticut.

Science.gov (United States)

Pietras, Jesse John; Murphy, Robert J.

This paper provides an overview of distance learning activities in Connecticut and addresses the feasibility of such activities. Distance education programs have evolved from the one dimensional electronic mail systems to the use of sophisticated digital fiber networks. The Middlesex Distance Learning Consortium has developed a long-range plan to…

Which spike train distance is most suitable for distinguishing rate and temporal coding?

Science.gov (United States)

Satuvuori, Eero; Kreuz, Thomas

2018-04-01

It is commonly assumed in neuronal coding that repeated presentations of a stimulus to a coding neuron elicit similar responses. One common way to assess similarity are spike train distances. These can be divided into spike-resolved, such as the Victor-Purpura and the van Rossum distance, and time-resolved, e.g. the ISI-, the SPIKE- and the RI-SPIKE-distance. We use independent steady-rate Poisson processes as surrogates for spike trains with fixed rate and no timing information to address two basic questions: How does the sensitivity of the different spike train distances to temporal coding depend on the rates of the two processes and how do the distances deal with very low rates? Spike-resolved distances always contain rate information even for parameters indicating time coding. This is an issue for reasonably high rates but beneficial for very low rates. In contrast, the operational range for detecting time coding of time-resolved distances is superior at normal rates, but these measures produce artefacts at very low rates. The RI-SPIKE-distance is the only measure that is sensitive to timing information only. While our results on rate-dependent expectation values for the spike-resolved distances agree with Chicharro et al. (2011), we here go one step further and specifically investigate applicability for very low rates. The most appropriate measure depends on the rates of the data being analysed. Accordingly, we summarize our results in one table that allows an easy selection of the preferred measure for any kind of data. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

A clinical distance measure for evaluating treatment plan quality difference with Pareto fronts in radiotherapy

Directory of Open Access Journals (Sweden)

Kristoffer Petersson

2017-07-01

Full Text Available We present a clinical distance measure for Pareto front evaluation studies in radiotherapy, which we show strongly correlates (r = 0.74 and 0.90 with clinical plan quality evaluation. For five prostate cases, sub-optimal treatment plans located at a clinical distance value of >0.32 (0.28–0.35 from fronts of Pareto optimal plans, were assessed to be of lower plan quality by our (12 observers (p < .05. In conclusion, the clinical distance measure can be used to determine if the difference between a front and a given plan (or between different fronts corresponds to a clinically significant plan quality difference.

Glucose uptake patterns in exercised skeletal muscles of elite male long-distance and short-distance runners.

Science.gov (United States)

Tai, Suh-Jun; Liu, Ren-Shyan; Kuo, Ya-Chen; Hsu, Chi-Yang; Chen, Chi-Hsien

2010-04-30

The aim of this study was to determine glucose uptake patterns in exercised skeletal muscles of elite male long-distance and short-distance runners. Positron emission tomography (PET) using 18F-fluoro-2-deoxyglucose (FDG) was performed to determine the patterns of glucose uptake in lower limbs of short-distance (SD group, n=8) and long-distance (LD group, n=8) male runners after a modified 20 min Bruce treadmill test. Magnetic resonance imaging (MRI) was used to delineate the muscle groups in lower limbs. Muscle groups from hip, knee, and ankle movers were measured. The total FDG uptake and the standard uptake value (SUV) for each muscle group were compared between the 2 groups. For the SD and LD runners, the 2 major muscle groups utilizing glucose during running were knee extensors and ankle plantarflexors, which accounted for 49.3 +/- 8.1% (25.1 +/- 4.7% and 24.2 +/- 6.0%) of overall lower extremity glucose uptake for SD group, and 51.3 +/- 8.0% (27.2 +/- 2.7% and 24.0 +/- 8.1%) for LD group. No difference in muscle glucose uptake was noted for other muscle groups. For SD runners, the SUVs for the muscle groups varied from 0.49 +/- 0.27 for the ankle plantarflexors, to 0.20 +/- 0.08 for the hip flexor. For the LD runners, the highest and lowest SUVs were 0.43 +/- 0.15 for the ankle dorsiflexors and 0.21 +/- 0.19 for the hip. For SD and LD groups, no difference in muscle SUV was noted for the muscle groups. However, the SUV ratio between the ankle dorsiflexors and plantarflexors in the LD group was significantly greater than that in the SD group. We thus conclude that the major propelling muscle groups account for approximately 50% of lower limb glucose utilization during running. Thus, the other muscle groups involving maintenance of balance, limb deceleration, and shock absorption utilize an equal amount. This result provides a new insight into glucose distribution in skeletal muscle, suggesting that propellers and supporters are both energetically important

A tiger beetle’s pursuit of prey depends on distance

Science.gov (United States)

Noest, R. M.; Wang, Z. Jane

2017-04-01

Tiger beetles pursue prey by adjusting their heading according to a time-delayed proportional control law that minimizes the error angle (Haselsteiner et al 2014 J. R. Soc. Interface 11 20140216). This control law can be further interpreted in terms of mechanical actuation: to catch prey, tiger beetles exert a sideways force by biasing their tripod gait in proportion to the error angle measured half a stride earlier. The proportional gain was found to be nearly optimal in the sense that it minimizes the time to point directly toward the prey. For a time-delayed linear proportional controller, the optimal gain, k, is inversely proportional to the time delay, τ, and satisfies kτ =1/e . Here we present evidence that tiger beetles adjust their control gain during their pursuit of prey. Our analysis shows two critical distances: one corresponding to the beetle’s final approach to the prey, and the second, less expected, occurring at a distance around 10 cm for a prey size of 4.5 mm. The beetle initiates its chase using a sub-critical gain and increases the gain to the optimal value once the prey is within this critical distance. Insects use a variety of methods to detect distance, often involving different visual cues. Here we examine two such methods: one based on motion parallax and the other based on the prey’s elevation angle. We show that, in order for the motion parallax method to explain the observed data, the beetle needs to correct for the ratio of the prey’s sideways velocity relative to its own. On the other hand, the simpler method based on the elevation angle can detect both the distance and the prey’s size. Moreover we find that the transition distance corresponds to the accuracy required to distinguish small prey from large predators.

USING THE SAFE SYSTEM APPROACH TO KEEP OLDER DRIVERS SAFELY MOBILE

Directory of Open Access Journals (Sweden)

Jim LANGFORD

2006-01-01

Full Text Available In 2003, Australian road transport jurisdictions collectively accepted that the greatest road safety gains would be achieved through adopting a Safe System approach, derived from Sweden's Vision Zero and the Netherlands' Sustainable Safety strategies. A key objective of all three approaches is to manage vehicles, the road infrastructure, speeds, road users and the interactions between these components, to ensure that in the event of crashes, crash energies will remain at levels that minimize the probability of death and serious injury. Older drivers pose a particular challenge to the Safe System approach, given particularly their greater physical frailty, their driving patterns and for some at least, their reduced fitness to drive. This paper has analyzed the so-called ‘older driver problem’ and identified a number of key factors underpinning their crash levels, for which countermeasures can be identified and implemented within a Safe System framework. The recommended countermeasures consist of: (1 safer roads, through a series of design improvements particularly governing urban intersections; (2 safer vehicles, through both the promotion of crashworthiness as a critical consideration when purchasing a vehicle and the wide use of developed and developing ITS technologies; (3 safer speeds especially at intersections; and (4 safer road users, through both improved assessment procedures to identify the minority of older drivers with reduced fitness to drive and educational efforts to encourage safer driving habits particularly but not only through self-regulation.

Motivation in Distance Leaming

Directory of Open Access Journals (Sweden)

Daniela Brečko

1996-12-01

Full Text Available It is estimated that motivation is one of the most important psychological functions making it possible for people to leam even in conditions that do not meet their needs. In distance learning, a form of autonomous learning, motivation is of outmost importance. When adopting this method in learning an individual has to stimulate himself and take learning decisions on his or her own. These specific characteristics of distance learning should be taken into account. This all different factors maintaining the motivation of partici­pants in distance learning are to be included. Moreover, motivation in distance learning can be stimulated with specific learning materials, clear instructions and guide-lines, an efficient feed back, personal contact between tutors and parti­cipants, stimulating learning letters, telephone calls, encouraging letters and through maintaining a positive relationship between tutor and participant.

Clustering by Partitioning around Medoids using Distance-Based Similarity Measures on Interval-Scaled Variables

Directory of Open Access Journals (Sweden)

D. L. Nkweteyim

2018-03-01

Full Text Available It is reported in this paper, the results of a study of the partitioning around medoids (PAM clustering algorithm applied to four datasets, both standardized and not, and of varying sizes and numbers of clusters. The angular distance proximity measure in addition to the two more traditional proximity measures, namely the Euclidean distance and Manhattan distance, was used to compute object-object similarity. The data used in the study comprise three widely available datasets, and one that was constructed from publicly available climate data. Results replicate some of the well known facts about the PAM algorithm, namely that the quality of the clusters generated tend to be much better for small datasets, that the silhouette value is a good, even if not perfect, guide for the optimal number of clusters to generate, and that human intervention is required to interpret generated clusters. Additionally, results also indicate that the angular distance measure, which traditionally has not been widely used in clustering, outperforms both the Euclidean and Manhattan distance metrics in certain situations.

DISTANCE BANKING SERVICES - A SOLUTION FOR THE ROMANIAN MANAGEMENT BANKING SYSTEM

Directory of Open Access Journals (Sweden)

ELENA SILVIA DINCULESCU

2010-01-01

Full Text Available Involved in the competition to attract and turn the clientele faithful, banks develop a series of activities that could increase their popularity, trust, and acknowledgement. Thus, creating a distance banking service is an opportunity that must be put into value. The present tendency at international level is the significant decrease of the importance of distribution channels through the classic banking network. In this context, active banks in Romania cannot be dissociated from the existing tendencies, and the spectacular dynamics of distance banking services in the last years has shown that, in a future closer than expected, clients might abandon the services of a bank with bad quality e-banking.

Feeling safe during an inpatient hospitalization: a concept analysis.

Science.gov (United States)

Mollon, Deene

2014-08-01

This paper aims to explore the critical attributes of the concept feeling safe. The safe delivery of care is a high priority; however; it is not really known what it means to the patient to 'feel safe' during an inpatient hospitalization. This analysis explores the topic of safety from the patient's perspective. Concept analysis. The data bases of CINAHL, Medline, PsychInfo and Google Scholar for the years 1995-2012 were searched using the terms safe and feeling safe. The eight-step concept analysis method of Walker and Avant was used to analyse the concept of feeling safe. Uses and defining attributes, as well as identified antecedents, consequences and empirical referents, are presented. Case examples are provided to assist in the understanding of defining attributes. Feeling safe is defined as an emotional state where perceptions of care contribute to a sense of security and freedom from harm. Four attributes were identified: trust, cared for, presence and knowledge. Relationship, environment and suffering are the antecedents of feeling safe, while control, hope and relaxed or calm are the consequences. Empirical referents and early development of a theory of feeling safe are explored. This analysis begins the work of synthesizing qualitative research already completed around the concept of feeling safe by defining the key attributes of the concept. Support for the importance of developing patient-centred models of care and creating positive environments where patients receive high-quality care and feel safe is provided. © 2014 John Wiley & Sons Ltd.

Research on Single Base-Station Distance Estimation Algorithm in Quasi-GPS Ultrasonic Location System

Energy Technology Data Exchange (ETDEWEB)

Cheng, X C; Su, S J; Wang, Y K; Du, J B [Instrument Department, College of Mechatronics Engineering and Automation, National University of Defense Technology, ChangSha, Hunan, 410073 (China)

2006-10-15

In order to identify each base-station in quasi-GPS ultrasonic location system, a unique pseudo-random code is assigned to each base-station. This article primarily studies the distance estimation problem between Autonomous Guide Vehicle (AGV) and single base-station, and then the ultrasonic spread-spectrum distance measurement Time Delay Estimation (TDE) model is established. Based on the above model, the envelope correlation fast TDE algorithm based on FFT is presented and analyzed. It shows by experiments that when the m sequence used in the received signal is as same as the reference signal, there will be a sharp correlation value in their envelope correlation function after they are processed by the above algorithm; otherwise, the will be no prominent correlation value. So, the AGV can identify each base-station easily.

Research on Single Base-Station Distance Estimation Algorithm in Quasi-GPS Ultrasonic Location System

International Nuclear Information System (INIS)

Cheng, X C; Su, S J; Wang, Y K; Du, J B

2006-01-01

In order to identify each base-station in quasi-GPS ultrasonic location system, a unique pseudo-random code is assigned to each base-station. This article primarily studies the distance estimation problem between Autonomous Guide Vehicle (AGV) and single base-station, and then the ultrasonic spread-spectrum distance measurement Time Delay Estimation (TDE) model is established. Based on the above model, the envelope correlation fast TDE algorithm based on FFT is presented and analyzed. It shows by experiments that when the m sequence used in the received signal is as same as the reference signal, there will be a sharp correlation value in their envelope correlation function after they are processed by the above algorithm; otherwise, the will be no prominent correlation value. So, the AGV can identify each base-station easily

Creating Safe Spaces for Music Learning

Science.gov (United States)

Hendricks, Karin S.; Smith, Tawnya D.; Stanuch, Jennifer

2014-01-01

This article offers a practical model for fostering emotionally safe learning environments that instill in music students a positive sense of self-belief, freedom, and purpose. The authors examine the implications for music educators of creating effective learning environments and present recommendations for creating a safe space for learning,…

Predicting soil acidification trends at Plynlimon using the SAFE model

Directory of Open Access Journals (Sweden)

B. Reynolds

1997-01-01

Full Text Available The SAFE model has been applied to an acid grassland site, located on base-poor stagnopodzol soils derived from Lower Palaeozoic greywackes. The model predicts that acidification of the soil has occurred in response to increased acid deposition following the industrial revolution. Limited recovery is predicted following the decline in sulphur deposition during the mid to late 1970s. Reducing excess sulphur and NOx deposition in 1998 to 40% and 70% of 1980 levels results in further recovery but soil chemical conditions (base saturation, soil water pH and ANC do not return to values predicted in pre-industrial times. The SAFE model predicts that critical loads (expressed in terms of the (Ca+Mg+K:Alcrit ratio for six vegetation species found in acid grassland communities are not exceeded despite the increase in deposited acidity following the industrial revolution. The relative growth response of selected vegetation species characteristic of acid grassland swards has been predicted using a damage function linking growth to soil solution base cation to aluminium ratio. The results show that very small growth reductions can be expected for 'acid tolerant' plants growing in acid upland soils. For more sensitive species such as Holcus lanatus, SAFE predicts that growth would have been reduced by about 20% between 1951 and 1983, when acid inputs were greatest. Recovery to c. 90% of normal growth (under laboratory conditions is predicted as acidic inputs decline.

Keeping Food Safe

Centers for Disease Control (CDC) Podcasts

2009-05-27

This CDC Kidtastics podcast discusses things kids and parents can do to help prevent illness by keeping food safe.  Created: 5/27/2009 by National Center for Zoonotic, Vector-Borne, and Enteric Diseases (NCZVED).   Date Released: 5/27/2009.

Plutonium safe handling

International Nuclear Information System (INIS)

Tvehlov, Yu.

2000-01-01

The abstract, prepared on the basis of materials of the IAEA new leadership on the plutonium safe handling and its storage (the publication no. 9 in the Safety Reports Series), aimed at presenting internationally acknowledged criteria on the radiation danger evaluation and summarizing the experience in the safe management of great quantities of plutonium, accumulated in the nuclear states, is presented. The data on the weapon-class and civil plutonium, the degree of its danger, the measures for provision of its safety, including the data on accident radiation consequences with the fission number 10 18 , are presented. The recommendations, making it possible to eliminate the super- criticality danger, as well as ignition and explosion, to maintain the tightness of the facility, aimed at excluding the radioactive contamination and the possibility of internal irradiation, to provide for the plutonium security, physical protection and to reduce irradiation are given [ru

Distance-based relative orbital elements determination for formation flying system

Science.gov (United States)

He, Yanchao; Xu, Ming; Chen, Xi

2016-01-01

The present paper deals with determination of relative orbital elements based only on distance between satellites in the formation flying system, which has potential application in engineering, especially suited for rapid orbit determination required missions. A geometric simplification is performed to reduce the formation configuration in three-dimensional space to a plane. Then the equivalent actual configuration deviating from its nominal design is introduced to derive a group of autonomous linear equations on the mapping between the relative orbital elements differences and distance errors. The primary linear equations-based algorithm is initially proposed to conduct the rapid and precise determination of the relative orbital elements without the complex computation, which is further improved by least-squares method with more distance measurements taken into consideration. Numerical simulations and comparisons with traditional approaches are presented to validate the effectiveness of the proposed methods. To assess the performance of the two proposed algorithms, accuracy validation and Monte Carlo simulations are implemented in the presence of noises of distance measurements and the leader's absolute orbital elements. It is demonstrated that the relative orbital elements determination accuracy of two approaches reaches more than 90% and even close to the actual values for the least-squares improved one. The proposed approaches can be alternates for relative orbit determination without assistance of additional facilities in engineering for their fairly high efficiency with accuracy and autonomy.

Psychological distance of pedestrian at the bus terminal area

Science.gov (United States)

Firdaus Mohamad Ali, Mohd; Salleh Abustan, Muhamad; Hidayah Abu Talib, Siti; Abustan, Ismail; Rahman, Noorhazlinda Abd; Gotoh, Hitoshi

2018-03-01

Walking is a part of transportation modes that is effective for pedestrian in either short or long trips. All people are classified as pedestrian because people do walk every day and the higher number of people walking will lead to crowd conditions and that is the reason of the importance to study about the behaviour of pedestrian specifically the psychological distance in both indoor and outdoor. Nowadays, the number of studies of crowd dynamics among pedestrian have increased due to the concern about the safety issues primarily related to the emergency cases such as fire, earthquake, festival and etc. An observation of pedestrian was conducted at one of the main bus terminals in Kuala Lumpur with the main objective to obtain pedestrian psychological distance and it took place for 45 minutes by using a camcorder that was set up by using a tripod on the upper floor from the area of observation at the main lobby and the trapped area was approximately 100 m2. The analysis was focused on obtaining the gap between pedestrian based on two different categories, which are; (a) Pedestrian with relationship, and (b) Pedestrian without relationship. In total, 1,766 data were obtained during the analysis in which 561 data were obtained for `Pedestrian with relationship' and 1,205 data were obtained for "Pedestrian without relationship". Based on the obtained results, "Pedestrian without relationship" had shown a slightly higher average value of psychological distance between them compare to "Pedestrian with relationship" with the results of 1.6360m and 1.5909m respectively. In gender case, "Pedestrian without relationship" had higher mean of psychological distance in all three categories as well. Therefore, it can be concluded that pedestrian without relationship tend to have longer distance when walking in crowds.

The Growing Impact of Open Access Distance Education Journals: A Bibliometric Analysis

Science.gov (United States)

Zawacki-Richter, Olaf; Anderson, Terry; Tuncay, Nazime

2010-01-01

Open access dissemination resonates with many distance education researchers and practitioners because it aligns with their fundamental mission of extending access to learning opportunity. However, there remains lingering doubt whether this increase in access comes at a cost of reducing prestige, value (often determined in promotion and tenure…

Nonlinear differential equations for the wavefront surface at arbitrary Hartmann-plane distances.

Science.gov (United States)

Téllez-Quiñones, Alejandro; Malacara-Doblado, Daniel; Flores-Hernández, Ricardo; Gutiérrez-Hernández, David A; León-Rodríguez, Miguel

2016-03-20

In the Hartmann test, a wave aberration function W is estimated from the information of the spot diagram drawn in an observation plane. The distance from a reference plane to the observation plane, the Hartmann-plane distance, is typically chosen as z=f, where f is the radius of a reference sphere. The function W and the transversal aberrations {X,Y} calculated at the plane z=f are related by two well-known linear differential equations. Here, we propose two nonlinear differential equations to denote a more general relation between W and the transversal aberrations {U,V} calculated at any arbitrary Hartmann-plane distance z=r. We also show how to directly estimate the wavefront surface w from the information of {U,V}. The use of arbitrary r values could improve the reliability of the measurements of W, or w, when finding difficulties in adequate ray identification at z=f.

Long-distance calls in Neotropical primates

Directory of Open Access Journals (Sweden)

Oliveira Dilmar A.G.

2004-01-01

Full Text Available Long-distance calls are widespread among primates. Several studies concentrate on such calls in just one or in few species, while few studies have treated more general trends within the order. The common features that usually characterize these vocalizations are related to long-distance propagation of sounds. The proposed functions of primate long-distance calls can be divided into extragroup and intragroup ones. Extragroup functions relate to mate defense, mate attraction or resource defense, while intragroup functions involve group coordination or alarm. Among Neotropical primates, several species perform long-distance calls that seem more related to intragroup coordination, markedly in atelines. Callitrichids present long-distance calls that are employed both in intragroup coordination and intergroup contests or spacing. Examples of extragroup directed long-distance calls are the duets of titi monkeys and the roars and barks of howler monkeys. Considerable complexity and gradation exist in the long-distance call repertoires of some Neotropical primates, and female long-distance calls are probably more important in non-duetting species than usually thought. Future research must focus on larger trends in the evolution of primate long-distance calls, including the phylogeny of calling repertoires and the relationships between form and function in these signals.

Cellular automata model for traffic flow with safe driving conditions

International Nuclear Information System (INIS)

Lárraga María Elena; Alvarez-Icaza Luis

2014-01-01

In this paper, a recently introduced cellular automata (CA) model is used for a statistical analysis of the inner microscopic structure of synchronized traffic flow. The analysis focuses on the formation and dissolution of clusters or platoons of vehicles, as the mechanism that causes the presence of this synchronized traffic state with a high flow. This platoon formation is one of the most interesting phenomena observed in traffic flows and plays an important role both in manual and automated highway systems (AHS). Simulation results, obtained from a single-lane system under periodic boundary conditions indicate that in the density region where the synchronized state is observed, most vehicles travel together in platoons with approximately the same speed and small spatial distances. The examination of velocity variations and individual vehicle gaps shows that the flow corresponding to the synchronized state is stable, safe and highly correlated. Moreover, results indicate that the observed platoon formation in real traffic is reproduced in simulations by the relation between vehicle headway and velocity that is embedded in the dynamics definition of the CA model. (general)

Distance Education in Technological Age

Directory of Open Access Journals (Sweden)

R .C. SHARMA

2005-04-01

Full Text Available Distance Education in Technological AgeRomesh Verma (Editor, New Delhi: Anmol Publications, 2005, ISBN 81-261-2210-2, pp. 419 Reviewed by R C SHARMARegional DirectorIndira Gandhi National Open University-INDIA The advancements in information and communication technologies have brought significant changes in the way the open and distance learning are provided to the learners. The impact of such changes is quite visible in both developed and developing countries. Switching over to online mode, joining hands with private initiatives and making a presence in foreign waters, are some of the hallmarks of the open and distance education (ODE institutions in developing countries. The compilation of twenty six essays on themes as applicable to ODE has resulted in the book, “Distance Education in Technological Age”. These essays follow a progressive style of narration, starting from describing conceptual framework of distance education, how the distance education was emerged on the global scene and in India, and then goes on to discuss emergence of online distance education and research aspects in ODE. The initial four chapters provide a detailed account of historical development and growth of distance education in India and State Open University and National Open University Model in India . Student support services are pivot to any distance education and much of its success depends on how well the support services are provided. These are discussed from national and international perspective. The issues of collaborative learning, learning on demand, life long learning, learning-unlearning and re-learning model and strategic alliances have also given due space by the authors. An assortment of technologies like communication technology, domestic technology, information technology, mass media and entertainment technology, media technology and educational technology give an idea of how these technologies are being adopted in the open universities. The study

The prognostic value of tip-to-apex distance (TAD index) in intertrochanteric fractures fixed by dynamic hip screw.

Science.gov (United States)

Sedighi, Ali; Sales, Jafar Ganjpour; Alavi, Sahar

2012-11-02

Intertrochanteric fractures (ITFs) are the most common type of fractures requiring surgical intervention. They also have the highest surgical mortality among orthopedic operations. Among the many different techniques used for fixation of this type of fracture, use of the Dynamic Hip Screw (DHS) has gained wide acceptance. This current study was designed to assess positive predictive value of tip-to-apex distance (TAD) index in the prognosis of patients treated with DHS. The study was designed according to a descriptive-analytic protocol, made up of 100 cases of ITFs caused by falling, treated in the Shohada Orthopedic Center, Tabriz, Iran. All patients underwent lateral and antero-posterior hip X-ray to measure TAD index. The cohort was followed for three months after DHS placement. Of a total of 100 cases (53 male, 47 female) with a mean age of 76.7 years (range 29-100 years), 43% had grade 4, 29% grade 3, 21% grade 5, 5% grade 2 and 2% grade 6 osteoporosis. The screw position was postero-inferior in 57%, central in 40% and superior in 3% of patients. Minimum and maximum TAD index were 20 and 28 mm, respectively. Mean TAD was 23.5 mm. There were no post-operative complications in 84% of cases. Screw failure was the most common complication in the remaining 16% of patients. The study shows a statistically significant correlation between TAD index and cut-off rate in patients with intertrochanteric fractures of femoral bone treated by DHS. This validates the use of TAD index in determining the prognosis of patients treated by DHS.

Partial distance correlation with methods for dissimilarities

OpenAIRE

Székely, Gábor J.; Rizzo, Maria L.

2014-01-01

Distance covariance and distance correlation are scalar coefficients that characterize independence of random vectors in arbitrary dimension. Properties, extensions, and applications of distance correlation have been discussed in the recent literature, but the problem of defining the partial distance correlation has remained an open question of considerable interest. The problem of partial distance correlation is more complex than partial correlation partly because the squared distance covari...

Safe injection practice among health care workers, Gharbiya, Egypt.

Science.gov (United States)

Ismail, Nanees A; Aboul Ftouh, Aisha M; El Shoubary, Waleed H

2005-01-01

A cross-sectional study was conducted in 25 health care facilities in Gharbiya governorate to assess safe injection practices among health care workers (HCWs). Two questionnaires, one to collect information about administrative issues related to safe injection and the other to collect data about giving injections, exposure to needle stick injuries, hepatitis B vaccination status and safe injection training. Practices of injections were observed using a standardized checklist. The study revealed that there was lack of both national and local infection control policies and lack of most of the supplies needed for safe injection practices. Many safe practices were infrequent as proper needle manipulation before disposal (41%), safe needle disposal (47.5%), reuse of used syringe & needle (13.2%) and safe syringe disposal (0%). Exposure to needle stick injuries were common among the interviewed HCWs (66.2%) and hand washing was the common post exposure prophylaxis measure (63.4%). Only 11.3% of HCWs had full course hepatitis B vaccination. Infection control -including safe injections- training programs should be afforded to all HCWs.

SafeNet: a methodology for integrating general-purpose unsafe devices in safe-robot rehabilitation systems.

Science.gov (United States)

Vicentini, Federico; Pedrocchi, Nicola; Malosio, Matteo; Molinari Tosatti, Lorenzo

2014-09-01

Robot-assisted neurorehabilitation often involves networked systems of sensors ("sensory rooms") and powerful devices in physical interaction with weak users. Safety is unquestionably a primary concern. Some lightweight robot platforms and devices designed on purpose include safety properties using redundant sensors or intrinsic safety design (e.g. compliance and backdrivability, limited exchange of energy). Nonetheless, the entire "sensory room" shall be required to be fail-safe and safely monitored as a system at large. Yet, sensor capabilities and control algorithms used in functional therapies require, in general, frequent updates or re-configurations, making a safety-grade release of such devices hardly sustainable in cost-effectiveness and development time. As such, promising integrated platforms for human-in-the-loop therapies could not find clinical application and manufacturing support because of lacking in the maintenance of global fail-safe properties. Under the general context of cross-machinery safety standards, the paper presents a methodology called SafeNet for helping in extending the safety rate of Human Robot Interaction (HRI) systems using unsafe components, including sensors and controllers. SafeNet considers, in fact, the robotic system as a device at large and applies the principles of functional safety (as in ISO 13489-1) through a set of architectural procedures and implementation rules. The enabled capability of monitoring a network of unsafe devices through redundant computational nodes, allows the usage of any custom sensors and algorithms, usually planned and assembled at therapy planning-time rather than at platform design-time. A case study is presented with an actual implementation of the proposed methodology. A specific architectural solution is applied to an example of robot-assisted upper-limb rehabilitation with online motion tracking. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

基于距离最大化和缺失数据聚类的填充算法%Missing value imputation algorithm based on distance maximization and missing data clustering

Institute of Scientific and Technical Information of China (English)

赵星; 王逊; 黄树成

2018-01-01

Through the improvement of the missing value filling algorithm based on K-means clustering,a filling algorithm based on distance maximization and missing data clustering is proposed in this paper.First of all,the original filling algorithm needs to enter the number of clusters in advance.To solve this problem,an improved K-means clustering algorithm is designed.It determines the cluster centers by the maximum distance between the data.It will automatically generate the number of clusters,and improve the efficiency of clustering.Secondly,the clustering distance function is improved.The improved algorithm can be used to cluster the missing value records,thus simplifying the steps of the original filling algorithm.Through experiments on STUDENT ALCOHOL CONSUMPTION data set,experimental results show that the proposed algorithm can improve efficiency and effectively fill the missing data at the same time.%通过对基于K-means聚类的缺失值填充算法的改进,文中提出了基于距离最大化和缺失数据聚类的填充算法.首先,针对原填充算法需要提前输入聚类个数这一缺点,设计了改进的K-means聚类算法:使用数据间的最大距离确定聚类中心,自动产生聚类个数,提高聚类效果;其次,对聚类的距离函数进行改进,采用部分距离度量方式,改进后的算法可以对含有缺失值的记录进行聚类,简化原填充算法步骤.通过对STUDENT ALCOHOL CONSUMPTION数据集的实验,结果证明了该算法能够在提高效率的同时,有效地填充缺失数据.

Distal scar-to-midline distance in pilonidal Limberg flap surgery is a recurrence-promoting factor: A multicenter, case-control study.

Science.gov (United States)

Kaplan, Mehmet; Ozcan, Onder; Bilgic, Ethem; Kaplan, Elif Tugce; Kaplan, Tugba; Kaplan, Fatma Cigdem

2017-11-01

The Limberg flap (LF) procedure is widely performed for the treatment of sacrococcygeal pilonidal sinus (SPS); however, recurrences continues to be observed. The aim of this study was to assess the relationship between LF designs and the risk of SPS recurrence. Sixty-one cases with recurrent disease (study group) and 194 controls, with a minimum of 5 recurrence-free years following surgery (control group), were included in the study. LF reconstructions performed in each group were classified as off-midline closure (OMC) and non-OMC types. Subsequently, the 2 groups were analyzed. After adjustment for all variables, non-OMC types showed the most prominent correlation with recurrence, followed by interrupted suturing type, family history of SPS, smoking, prolonged healing time, and younger age. The best cut-off value for the critical distance from the midline was found to be 11 mm (with 72% sensitivity and 95% specificity for recurrence). We recommend OMC modifications, with the flap tailored to create a safe margin of at least 2 cm between the flap borders and the midline. Copyright © 2017 Elsevier Inc. All rights reserved.

Monetary benefits of preventing childhood lead poisoning with lead-safe window replacement.

Science.gov (United States)

Nevin, Rick; Jacobs, David E; Berg, Michael; Cohen, Jonathan

2008-03-01

Previous estimates of childhood lead poisoning prevention benefits have quantified the present value of some health benefits, but not the costs of lead paint hazard control or the benefits associated with housing and energy markets. Because older housing with lead paint constitutes the main exposure source today in the US, we quantify health benefits, costs, market value benefits, energy savings, and net economic benefits of lead-safe window replacement (which includes paint stabilization and other measures). The benefit per resident child from improved lifetime earnings alone is $21,195 in pre-1940 housing and $8685 in 1940-59 housing (in 2005 dollars). Annual energy savings are $130-486 per housing unit, with or without young resident children, with an associated increase in housing market value of $5900-14,300 per housing unit, depending on home size and number of windows replaced. Net benefits are $4490-5,629 for each housing unit built before 1940, and $491-1629 for each unit built from 1940-1959, depending on home size and number of windows replaced. Lead-safe window replacement in all pre-1960 US housing would yield net benefits of at least $67 billion, which does not include many other benefits. These other benefits, which are shown in this paper, include avoided Attention Deficit Hyperactivity Disorder, other medical costs of childhood lead exposure, avoided special education, and reduced crime and juvenile delinquency in later life. In addition, such a window replacement effort would reduce peak demand for electricity, carbon emissions from power plants, and associated long-term costs of climate change.

The effect of weak lensing on distance estimates from supernovae

Energy Technology Data Exchange (ETDEWEB)

Smith, Mathew; Maartens, Roy [Department of Physics, University of the Western Cape, Cape Town 7535 (South Africa); Bacon, David J.; Nichol, Robert C.; Campbell, Heather; D' Andrea, Chris B. [Institute of Cosmology and Gravitation, University of Portsmouth, Portsmouth, PO1 3FX (United Kingdom); Clarkson, Chris [Astrophysics, Cosmology and Gravity Centre (ACGC), Department of Mathematics and Applied Mathematics, University of Cape Town, Rondebosch 7701 (South Africa); Bassett, Bruce A. [South African Astronomical Observatory, P.O. Box 9, Observatory 7935 (South Africa); Cinabro, David [Wayne State University, Department of Physics and Astronomy, Detroit, MI 48202 (United States); Finley, David A.; Frieman, Joshua A. [Center for Particle Astrophysics, Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, IL 60510 (United States); Galbany, Lluis [CENTRA Centro Multidisciplinar de Astrofísica, Instituto Superior Técnico, Av. Rovisco Pais 1, 1049-001 Lisbon (Portugal); Garnavich, Peter M. [Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States); Olmstead, Matthew D. [Department of Physics and Astronomy, University of Utah, Salt Lake City, UT 84112 (United States); Schneider, Donald P. [Department of Astronomy and Astrophysics, The Pennsylvania State University, University Park, PA 16802 (United States); Shapiro, Charles [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, La Canada Flintridge, CA 91109 (United States); Sollerman, Jesper, E-mail: matsmith2@gmail.com [The Oskar Klein Centre, Department of Astronomy, AlbaNova, SE-106 91 Stockholm (Sweden)

2014-01-01

Using a sample of 608 Type Ia supernovae from the SDSS-II and BOSS surveys, combined with a sample of foreground galaxies from SDSS-II, we estimate the weak lensing convergence for each supernova line of sight. We find that the correlation between this measurement and the Hubble residuals is consistent with the prediction from lensing (at a significance of 1.7σ). Strong correlations are also found between the residuals and supernova nuisance parameters after a linear correction is applied. When these other correlations are taken into account, the lensing signal is detected at 1.4σ. We show, for the first time, that distance estimates from supernovae can be improved when lensing is incorporated, by including a new parameter in the SALT2 methodology for determining distance moduli. The recovered value of the new parameter is consistent with the lensing prediction. Using cosmic microwave background data from WMAP7, H {sub 0} data from Hubble Space Telescope and Sloan Digital Sky Survey (SDSS) Baryon acoustic oscillations measurements, we find the best-fit value of the new lensing parameter and show that the central values and uncertainties on Ω {sub m} and w are unaffected. The lensing of supernovae, while only seen at marginal significance in this low-redshift sample, will be of vital importance for the next generation of surveys, such as DES and LSST, which will be systematics-dominated.

Heading towards the Safer Highways: an assessment of the Avahan prevention programme among long distance truck drivers in India.

Science.gov (United States)

Pandey, Arvind; Mishra, Ram Manohar; Sahu, Damodar; Benara, Sudhir Kumar; Sengupta, Uttpal; Paranjape, Ramesh S; Gautam, Abhishek; Lenka, Satya Ranjan; Adhikary, Rajatshurva

2011-12-29

Using data from two rounds of a cross-sectional, national-level survey of long-distance truck drivers, this paper examines the extent and trend of sexual risk behavior, prevalence of STI/HIV, and the linkage between exposure to HIV prevention programs and safe sex behavior. Following the time location cluster sampling approach, major transshipment locations covering the bulk of India's transport volume along four routes, North-East (NE), North-South (NS), North-West (NW) and South-East (SE) were surveyed. First round of the survey was conducted in 2007 (sample size 2066) whereas the second round was undertaken in 2009-2010 (sample size 2085). Long distance truck drivers were interviewed about their sexual behaviors, condom use practices, exposure to different HIV prevention interventions, and tested for HIV, reactive syphilis serology, Neiserria gonorrhoeae and Chlamydia trachomatis. The key variable of this evaluation study - exposure to HIV prevention interventions was divided into three categories - no exposure, less intensive exposure and intensive exposure. Data were analyzed using multiple logistic regression methods to understand the relationship between risk behavior and exposure to intervention and between program exposure and condom use. The proportion of truckers exposed to HIV prevention interventions has increased over time with much significant increase in the intensive exposure across all the four routes (NE: from 14.9% to 28%, P India and elsewhere. The simultaneous targeted interventions among female sex workers appeared to have contributed to safe sexual practices among truckers.

Implicit attitudes towards risky and safe driving

DEFF Research Database (Denmark)

Martinussen, Laila Marianne; Sømhovd, Mikael Julius; Møller, Mette

; further, self-reports of the intention to drive safely (or not) are socially sensitive. Therefore, we examined automatic preferences towards safe and risky driving with a Go/No-go Association Task (GNAT). The results suggest that (1) implicit attitudes towards driving behavior can be measured reliably...... with the GNAT; (2) implicit attitudes towards safe driving versus towards risky driving may be separable constructs. We propose that research on driving behavior may benefit from routinely including measures of implicit cognition. A practical advantage is a lesser susceptibility to social desirability biases......, compared to self-report methods. Pending replication in future research, the apparent dissociation between implicit attitudes towards safe versus risky driving that we observed may contribute to a greater theoretical understanding of the causes of unsafe and risky driving behavior....

Distance labeling schemes for trees

DEFF Research Database (Denmark)

Alstrup, Stephen; Gørtz, Inge Li; Bistrup Halvorsen, Esben

2016-01-01

We consider distance labeling schemes for trees: given a tree with n nodes, label the nodes with binary strings such that, given the labels of any two nodes, one can determine, by looking only at the labels, the distance in the tree between the two nodes. A lower bound by Gavoille et al. [Gavoille...... variants such as, for example, small distances in trees [Alstrup et al., SODA, 2003]. We improve the known upper and lower bounds of exact distance labeling by showing that 1/4 log2(n) bits are needed and that 1/2 log2(n) bits are sufficient. We also give (1 + ε)-stretch labeling schemes using Theta...

Distance relay performance in future converter dominated power systems

OpenAIRE

Sarkar, Moumita; Jia, Jundi; Yang, Guangya

2017-01-01

Increasing penetration of converter-based generations in power system has led to new system challenges. Short circuit power response from converter-based generations is different from that of traditional synchronous generators. Power electronic converters can be designed for over-current only up to 1.1-1.25 times of its nominal value. Low availability of short circuit power can cause many challenges such as misoperation of distance relays. The aim of this paper is to investigate the effect of...

Leader humility and team creativity: The role of team information sharing, psychological safety, and power distance.

Science.gov (United States)

Hu, Jia; Erdogan, Berrin; Jiang, Kaifeng; Bauer, Talya N; Liu, Songbo

2018-03-01

In this study, we identify leader humility, characterized by being open to admitting one's limitations, shortcomings, and mistakes, and showing appreciation and giving credit to followers, as a critical leader characteristic relevant for team creativity. Integrating the literatures on creativity and leadership, we explore the relationship between leader humility and team creativity, treating team psychological safety and team information sharing as mediators. Further, we hypothesize and examine team power distance as a moderator of the relationship. We tested our hypotheses using data gathered from 72 work teams and 354 individual members from 11 information and technology firms in China using a multiple-source, time-lagged research design. We found that the positive relationship between leader humility and team information sharing was significant and positive only within teams with a low power distance value. In addition, leader humility was negatively related to team psychological safety in teams with a high power distance value, whereas the relationship was positive yet nonsignificant in teams with low power distance. Furthermore, team information sharing and psychological safety were both significantly related to team creativity. We discuss theoretical and practical implications for leadership and work teams. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Fundamental design of a distributed erbium-doped fiber amplifier for long-distance transmission

DEFF Research Database (Denmark)

Rottwitt, Karsten; Bjarklev, Anders Overgaard; Povlsen, Jørn Hedegaard

1992-01-01

. Designs based on a bidirectional pumping scheme are evaluated, taking nonlinearities into account. The optimum value of the numerical aperture will be evaluated for cutoff wavelengths where the propagating pump power is single moded. For distances between each pumping station in the region between 10...

Prospects for inherently safe reactors

International Nuclear Information System (INIS)

Barkenbus, J.N.

1988-01-01

Public fears over nuclear safety have led some within the nuclear community to investigate the possibility of producing inherently safe nuclear reactors; that is, reactors that are transparently incapable of producing a core melt. While several promising designs of such reactors have been produced, support for large-scale research and development efforts has not been forthcoming. The prospects for commercialization of inherently safe reactors, therefore, are problematic; possible events such as further nuclear reactor accidents and superpower summits, could alter the present situation significantly. (author)

On Distance Scale Bias due to Stellar Multiplicity and Associations

Science.gov (United States)

Anderson, Richard I.; Riess, Adam

2018-01-01

The Cepheid Period-luminosity relation (Leavitt Law) provides the most accurate footing for the cosmic distance scale (CDS). Recently, evidence has been presented that the value of the Hubble constant H0 measured via the cosmic distance scale differs by 3.4σ from the value inferred using Planck data assuming ΛCDM cosmology (Riess et al. 2016). This exciting result may point to missing physics in the cosmological model; however, before such a claim can be made, careful analyses must address possible systematics involved in the calibration of the CDS.A frequently made claim in the literature is that companion stars or cluster membership of Cepheids may bias the calibration of the CDS. To evaluate this claim, we have carried out the first detailed study of the impact of Cepheid multiplicity and cluster membership on the determination of H0. Using deep HST imaging of M31 we directly measured the mean photometric bias due to cluster companions on Cepheid-based distances. Together with the empirical determination of the frequency with which Cepheids appear in clusters we quantify the combined H0 bias from close associations to be approximately 0.3% (0.20 km s-1 Mpc-1) for the passbands commonly used. Thus, we demonstrate that stellar associations cannot explain the aforementioned discrepancy observed in H0 and do not prevent achieving the community goal of measuring H0 with an accuracy of 1%. We emphasize the subtle, but important, difference between systematics relevant for calibrating the Leavitt Law (achieving a better understanding of stellar physics) and for accurately calibrating the CDS (measuring H0).

Tracking frequency laser distance gauge

International Nuclear Information System (INIS)

Phillips, J.D.; Reasenberg, R.D.

2005-01-01

Advanced astronomical missions with greatly enhanced resolution and physics missions of unprecedented accuracy will require laser distance gauges of substantially improved performance. We describe a laser gauge, based on Pound-Drever-Hall locking, in which the optical frequency is adjusted to maintain an interferometer's null condition. This technique has been demonstrated with pm performance. Automatic fringe hopping allows it to track arbitrary distance changes. The instrument is intrinsically free of the nm-scale cyclic bias present in traditional (heterodyne) high-precision laser gauges. The output is a radio frequency, readily measured to sufficient accuracy. The laser gauge has operated in a resonant cavity, which improves precision, can suppress the effects of misalignments, and makes possible precise automatic alignment. The measurement of absolute distance requires little or no additional hardware, and has also been demonstrated. The proof-of-concept version, based on a stabilized HeNe laser and operating on a 0.5 m path, has achieved 10 pm precision with 0.1 s integration time, and 0.1 mm absolute distance accuracy. This version has also followed substantial distance changes as fast as 16 mm/s. We show that, if the precision in optical frequency is a fixed fraction of the linewidth, both incremental and absolute distance precision are independent of the distance measured. We discuss systematic error sources, and present plans for a new version of the gauge based on semiconductor lasers and fiber-coupled components

Evaluation of MODIS Land Surface Temperature with In Situ Snow Surface Temperature from CREST-SAFE

Science.gov (United States)

Perez Diaz, C. L.; Lakhankar, T.; Romanov, P.; Munoz, J.; Khanbilvardi, R.; Yu, Y.

2016-12-01

This paper presents the procedure and results of a temperature-based validation approach for the Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature (LST) product provided by the National Aeronautics and Space Administration (NASA) Terra and Aqua Earth Observing System satellites using in situ LST observations recorded at the Cooperative Remote Sensing Science and Technology Center - Snow Analysis and Field Experiment (CREST-SAFE) during the years of 2013 (January-April) and 2014 (February-April). A total of 314 day and night clear-sky thermal images, acquired by the Terra and Aqua satellites, were processed and compared to ground-truth data from CREST-SAFE with a frequency of one measurement every 3 min. Additionally, this investigation incorporated supplementary analyses using meteorological CREST-SAFE in situ variables (i.e. wind speed, cloud cover, incoming solar radiation) to study their effects on in situ snow surface temperature (T-skin) and T-air. Furthermore, a single pixel (1km2) and several spatially averaged pixels were used for satellite LST validation by increasing the MODIS window size to 5x5, 9x9, and 25x25 windows for comparison. Several trends in the MODIS LST data were observed, including the underestimation of daytime values and nighttime values. Results indicate that, although all the data sets (Terra and Aqua, diurnal and nocturnal) showed high correlation with ground measurements, day values yielded slightly higher accuracy ( 1°C), both suggesting that MODIS LST retrievals are reliable for similar land cover classes and atmospheric conditions. Results from the CREST-SAFE in situ variables' analyses indicate that T-air is commonly higher than T-skin, and that a lack of cloud cover results in: lower T-skin and higher T-air minus T-skin difference (T-diff). Additionally, the study revealed that T-diff is inversely proportional to cloud cover, wind speed, and incoming solar radiation. Increasing the MODIS window size

ADULT LEARNERS IN DISTANCE HIGHER EDUCATION

Directory of Open Access Journals (Sweden)

NORICA-FELICIA BUCUR

2012-05-01

Full Text Available This paper attempts at identifying the main features that characterize distance higher education and adult education, respectively, in order to be able to establish to what extent adult learners can fit in distance higher education programs. The historical background of distance learning education, the factors that influence adult learners, and distance learning’s key objectives, effects, issues, advantages, and disadvantages are to be briefly investigated in order to reach the purpose of this paper. Recent developments in Information Technology have led to a new approach to teaching and learning, especially as far as adult learning and distance learning are concerned. Thus, this study will also focus on the consequences of using technology for course design, delivery, and the perception of adult learners participating in distance learning.

Distance and Cable Length Measurement System

Science.gov (United States)

Hernández, Sergio Elias; Acosta, Leopoldo; Toledo, Jonay

2009-01-01

A simple, economic and successful design for distance and cable length detection is presented. The measurement system is based on the continuous repetition of a pulse that endlessly travels along the distance to be detected. There is a pulse repeater at both ends of the distance or cable to be measured. The endless repetition of the pulse generates a frequency that varies almost inversely with the distance to be measured. The resolution and distance or cable length range could be adjusted by varying the repetition time delay introduced at both ends and the measurement time. With this design a distance can be measured with centimeter resolution using electronic system with microsecond resolution, simplifying classical time of flight designs which require electronics with picosecond resolution. This design was also applied to position measurement. PMID:22303169

50 CFR 216.91 - Dolphin-safe labeling standards.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Dolphin-safe labeling standards. 216.91... MAMMALS Dolphin Safe Tuna Labeling § 216.91 Dolphin-safe labeling standards. (a) It is a violation of... include on the label of those products the term “dolphin-safe” or any other term or symbol that claims or...

Medications: Using Them Safely

Science.gov (United States)

... to Safely Give Ibuprofen Childproofing and Preventing Household Accidents Medicines for Diabetes Complementary and Alternative Medicine How Do Pain Relievers Work? What Medicines Are and What They Do Medicines ...

Distance Education in Entwicklungslandern.

Science.gov (United States)

German Foundation for International Development, Bonn (West Germany).

Seminar and conference reports and working papers on distance education of adults, which reflect the experiences of many countries, are presented. Contents include the draft report of the 1979 International Seminar on Distance Education held in Addis Ababa, Ethiopia, which was jointly sponsored by the United Nations Economic Commission for Africa…

Heterosis and genetic distance in rapeseed (Brasica napus L.). Use of different indicators of genetic divergence in 7x7 diallel

OpenAIRE

Lefort-Buson, Marianne; Guillot-Lemoine, Brigitte; Dattée, Yvette

1986-01-01

The paper deals with a comparison of different indicators of genetic divergence between rapeseed parental lines : the relationship coefficient defined by MALÈCOT the generalized distance D2 of Mahalanobis, and a new G2 parameter close to HANSON & CASAS' R2. The purpose of the authors is to discuss the advantages of their simultaneous use in the prediction of both heterosis values and F1 performances of hybrids from parental lines. Relationships between heterosis values and genetic distanc...

Distance sampling methods and applications

CERN Document Server

Buckland, S T; Marques, T A; Oedekoven, C S

2015-01-01

In this book, the authors cover the basic methods and advances within distance sampling that are most valuable to practitioners and in ecology more broadly. This is the fourth book dedicated to distance sampling. In the decade since the last book published, there have been a number of new developments. The intervening years have also shown which advances are of most use. This self-contained book covers topics from the previous publications, while also including recent developments in method, software and application. Distance sampling refers to a suite of methods, including line and point transect sampling, in which animal density or abundance is estimated from a sample of distances to detected individuals. The book illustrates these methods through case studies; data sets and computer code are supplied to readers through the book’s accompanying website.  Some of the case studies use the software Distance, while others use R code. The book is in three parts.  The first part addresses basic methods, the ...

Anxiety and Resistance in Distance Learning

OpenAIRE

Nazime Tuncay; Huseyin Uzunboylu

2010-01-01

The purpose of this study was to investigate students' anxiety and resistance towards learning through distance education.Specifically, the study sought answers to the following questions: -What are the reasons of students not choosing distancelearning courses? -Which symptoms of anxiety, if any, do distance learner’s exhibit towards distance learning? Does genderhave any significant relationships with distance learners' perception of factors that affect their anxiety and resistance? A totalo...

Implementation of Safe-by-Design for Nanomaterial Development and Safe Innovation: Why We Need a Comprehensive Approach.

Science.gov (United States)

Kraegeloh, Annette; Suarez-Merino, Blanca; Sluijters, Teun; Micheletti, Christian

2018-04-14

Manufactured nanomaterials (MNMs) are regarded as key components of innovations in various fields with high potential impact (e.g., energy generation and storage, electronics, photonics, diagnostics, theranostics, or drug delivery agents). Widespread use of MNMs raises concerns about their safety for humans and the environment, possibly limiting the impact of the nanotechnology-based innovation. The development of safe MNMs and nanoproducts has to result in a safe as well as functional material or product. Its safe use, and disposal at the end of its life cycle must be taken into account too. However, not all MNMs are similarly useful for all applications, some might bear a higher hazard potential than others, and use scenarios could lead to different exposure probabilities. To improve both safety and efficacy of nanotechnology, we think that a new proactive approach is necessary, based on pre-regulatory safety assessment and dialogue between stakeholders. On the basis of the work carried out in different European Union (EU) initiatives, developing and integrating MNMs Safe-by-Design and Trusted Environments (NANoREG, ProSafe, and NanoReg2), we present our point of view here. This concept, when fully developed, will allow for cost effective industrial innovation, and an exchange of key information between regulators and innovators. Regulators are thus informed about incoming innovations in good time, supporting a proactive regulatory action. The final goal is to contribute to the nanotechnology governance, having faster, cheaper, effective, and safer nano-products on the market.

A distance of 133-137 parsecs to the Pleiades star cluster.

Science.gov (United States)

Pan, Xiaopei; Shao, M; Kulkarni, S R

2004-01-22

Nearby 'open' clusters of stars (those that are not gravitationally bound) have played a crucial role in the development of stellar astronomy because, as a consequence of the stars having a common age, they provide excellent natural laboratories to test theoretical stellar models. Clusters also play a fundamental part in determining distance scales. The satellite Hipparcos surprisingly found that an extensively studied open cluster--the Pleiades (also known as the Seven Sisters)--had a distance of D = 118 +/- 4 pc (refs 2, 3), about ten per cent smaller than the accepted value. The discrepancy generated a spirited debate because the implication was that either current stellar models were incorrect by a surprising amount or Hipparcos was giving incorrect distances. Here we report the orbital parameters of the bright double star Atlas in the Pleiades, using long-baseline optical/infrared interferometry. From the data we derive a firm lower bound of D > 127 pc, with the most likely range being 133 < D < 137 pc. Our result reaffirms the fidelity of current stellar models.

Determination of interplanar distances starting from diffraction spectra for PC microcomputer

International Nuclear Information System (INIS)

Macias B, L.R.

1991-07-01

The objective of this work, consists in that starting of a digitized diffraction spectra result of the structural analysis technique, it is possible by means of the analysis of a computer program, to detect the diffraction peaks and well-known the wavelength to obtain the values of the interplanar distances to be compared with the JCPDS (Joint Committee on Powder Diffraction Standards). (Author)

Safe havens in Europe: Switzerland and the ten dwarfs

Directory of Open Access Journals (Sweden)

Martin Paldam

2013-12-01

Full Text Available Eleven safe havens exist in Europe providing offshore banking and low taxes. Ten of these states are very small while Switzerland is moderately small. All 11countries are richer than their large neighbors. It is shown that causality is from small to safe haven towealth, and that theoretically equilibriums are likely to exist where a certain regulation is substantially lower in a small country than in its big neighbor. This generates a large capital inflow to the safe havens. The pool of funds that may reach the safe havens is shown to be huge. It is far in excess of the absorptive capacity of the safe havens, but it still explains, why they are rich. Microstates offer a veil of anonymity to funds passing through, and Switzerland offers safe storage of funds.

Revised Distances to 21 Supernova Remnants

Science.gov (United States)

Ranasinghe, S.; Leahy, D. A.

2018-05-01

We carry out a comprehensive study of H I 21 cm line observations and 13CO line observations of 21 supernova remnants (SNRs). The aim of the study is to search for H I absorption features to obtain kinematic distances in a consistent manner. The 21 SNRs are in the region of sky covered by the Very Large Array Galactic Plane Survey (H I 21 cm observations) and Galactic Ring Survey (13CO line observations). We obtain revised distances for 10 SNRs based on new evidence in the H I and 13CO observations. We revise distances for the other 11 SNRs based on an updated rotation curve and new error analysis. The mean change in distance for the 21 SNRs is ≃25%, i.e., a change of 1.5 kpc compared to a mean distance for the sample of 6.4 kpc. This has a significant impact on interpretation of the physical state of these SNRs. For example, using a Sedov model, age and explosion energy scale as the square of distance, and inferred ISM density scales as distance.

Safe and Liquid Mortgage Bonds

DEFF Research Database (Denmark)

Dick-Nielsen, Jens; Gyntelberg, Jacob; Lund, Jesper

This paper shows that strict match pass-through funding of covered bonds provides safe and liquid mortgage bonds. Despite a 30% drop in house prices during the 2008 global crisis Danish mortgage bonds remained as liquid as most European government bonds. The Danish pass-through system effectively...... eliminates credit risk from the investor's perspective. Similar to other safe bonds, funding liquidity becomes the main driver of mortgage bond liquidity and this creates commonality in liquidity across markets and countries. These findings have implications for how to design a robust mortgage bond system...

A cognitively grounded measure of pronunciation distance.

Directory of Open Access Journals (Sweden)

Martijn Wieling

Full Text Available In this study we develop pronunciation distances based on naive discriminative learning (NDL. Measures of pronunciation distance are used in several subfields of linguistics, including psycholinguistics, dialectology and typology. In contrast to the commonly used Levenshtein algorithm, NDL is grounded in cognitive theory of competitive reinforcement learning and is able to generate asymmetrical pronunciation distances. In a first study, we validated the NDL-based pronunciation distances by comparing them to a large set of native-likeness ratings given by native American English speakers when presented with accented English speech. In a second study, the NDL-based pronunciation distances were validated on the basis of perceptual dialect distances of Norwegian speakers. Results indicated that the NDL-based pronunciation distances matched perceptual distances reasonably well with correlations ranging between 0.7 and 0.8. While the correlations were comparable to those obtained using the Levenshtein distance, the NDL-based approach is more flexible as it is also able to incorporate acoustic information other than sound segments.

A STUDY OF THE HELIOCENTRIC DEPENDENCE OF SHOCK STANDOFF DISTANCE AND GEOMETRY USING 2.5D MAGNETOHYDRODYNAMIC SIMULATIONS OF CORONAL MASS EJECTION DRIVEN SHOCKS

International Nuclear Information System (INIS)

Savani, N. P.; Shiota, D.; Kusano, K.; Vourlidas, A.; Lugaz, N.

2012-01-01

We perform four numerical magnetohydrodynamic simulations in 2.5 dimensions (2.5D) of fast coronal mass ejections (CMEs) and their associated shock fronts between 10 Rs and 300 Rs. We investigate the relative change in the shock standoff distance, Δ, as a fraction of the CME radial half-width, D OB (i.e., Δ/D OB ). Previous hydrodynamic studies have related the shock standoff distance for Earth's magnetosphere to the density compression ratio (DR; ρ u /ρ d ) measured across the bow shock. The DR coefficient, k dr , which is the proportionality constant between the relative standoff distance (Δ/D OB ) and the compression ratio, was semi-empirically estimated as 1.1. For CMEs, we show that this value varies linearly as a function of heliocentric distance and changes significantly for different radii of curvature of the CME's leading edge. We find that a value of 0.8 ± 0.1 is more appropriate for small heliocentric distances ( dr value increases linearly with heliocentric distance, such that k dr = 1.1 is most appropriate at a heliocentric distance of about 80 Rs. For terrestrial distances (215 Rs) we estimate k dr = 1.8 ± 0.3, which also indicates that the CME cross-sectional structure is generally more oblate than that of Earth's magnetosphere. These alterations to the proportionality coefficients may serve to improve investigations into the estimates of the magnetic field in the corona upstream of a CME as well as the aspect ratio of CMEs as measured in situ.

Fast Exact Euclidean Distance (FEED) Transformation

NARCIS (Netherlands)

Schouten, Theo; Kittler, J.; van den Broek, Egon; Petrou, M.; Nixon, M.

2004-01-01

Fast Exact Euclidean Distance (FEED) transformation is introduced, starting from the inverse of the distance transformation. The prohibitive computational cost of a naive implementation of traditional Euclidean Distance Transformation, is tackled by three operations: restriction of both the number

Utilization of the emergency room: impact of geographic distance

Directory of Open Access Journals (Sweden)

Jae Eun Lee

2007-05-01

Full Text Available The aim of this study was to estimate the distance Mississippi patients must travel to access hospital-based emergency rooms (ERs and to determine whether an association exists between geographic distance and ER utilization. To that end, great circle distances between Census Block Group Centroid Points and 89 hospitals with emergency departments were calculated for the State of Mississippi. Data on the socio-demographic characteristics of each block group came from the 2000 US Census data. Logistic regression analyses were conducted to test if there was any association between ER utilization and travel distance. Compared to the national benchmark of 35.7%, more than one in two (56.7%, or 1,612,762 Mississippians visited ERs in 2003 with an estimated 6.1 miles per person annual travel for this purpose. The majority of the target population (54.9% was found to live within 5 miles of hospitals with ERs. Logistic analyses revealed that block groups associated with less miles traveled to hospitals with ERs had a higher proportion of African Americans, impoverished people, female householders, people with more than 12 years education, people older than 65 years, people with high median house values, and people without employment. Twenty-nine of the 89 hospitals (33% providing ER care in Mississippi were found to be in areas with above-average ER utilization rates. These hospitals served a smaller geographical area (28% of the total but had a greater proportion of visitors (57% and served a higher percentage (37% of the state population. People in areas served by the less utilized ERs traveled more miles to be cared for (7.1 miles vs 5.4 miles; p<0.0001. Logistic regression analysis revealed that shorter distances were associated with increased use of the ERs, even after controlling for socio-demographic factors. The conclusion is that Mississippi ERs are typically located in block groups with higher percentages of disadvantaged residents and that

Implementation of an Improved Safe Operating Envelope

International Nuclear Information System (INIS)

Prime, Robyn; McIntyre, Mark; Reeves, David

2008-01-01

This paper is a continuation of the paper presented at IYNC 2004 on 'The Definition of a Safe Operating Envelope'. The current paper concentrates on the implementation process of the Safe Operating Envelope employed at the Point Lepreau Generating Station. (authors)

Quantum Algorithm for K-Nearest Neighbors Classification Based on the Metric of Hamming Distance

Science.gov (United States)

Ruan, Yue; Xue, Xiling; Liu, Heng; Tan, Jianing; Li, Xi

2017-11-01

K-nearest neighbors (KNN) algorithm is a common algorithm used for classification, and also a sub-routine in various complicated machine learning tasks. In this paper, we presented a quantum algorithm (QKNN) for implementing this algorithm based on the metric of Hamming distance. We put forward a quantum circuit for computing Hamming distance between testing sample and each feature vector in the training set. Taking advantage of this method, we realized a good analog for classical KNN algorithm by setting a distance threshold value t to select k - n e a r e s t neighbors. As a result, QKNN achieves O( n 3) performance which is only relevant to the dimension of feature vectors and high classification accuracy, outperforms Llyod's algorithm (Lloyd et al. 2013) and Wiebe's algorithm (Wiebe et al. 2014).

Bipartite non-classical correlations for a lossy two connected qubit-cavity systems: trace distance discord and Bell's non-locality

Science.gov (United States)

Mohamed, Abdel-Baset A.

2018-04-01

In this paper, some non-classical correlations are investigated for bipartite partitions of two qubits trapped in two spatially separated cavities connected by an optical fiber. The results show that the trace distance discord and Bell's non-locality introduce other quantum correlations beyond the entanglement. Moreover, the correlation functions of the trace distance discord and the Bell's non-locality are very sensitive to the initial correlations, the coupling strengths, and the dissipation rates of the cavities. The fluctuations of the correlation functions between their initial values and gained (loss) values appear due to the unitary evolution of the system. These fluctuations depend on the chosen initial correlations between the two subsystems. The maximal violations of Bell's inequality occur when the logarithmic negativity and the trace distance discord reach certain values. It is shown that the robustness of the non-classical correlations, against the dissipation rates of the cavities, depends on the bipartite partitions reduced density matrices of the system, and is also greatly enhanced by choosing appropriate coupling strengths.

Corrosion in marine atmospheres. Effect of distance from the coast

International Nuclear Information System (INIS)

Chico, B.; Otero, E.; Morcillos, M.; Mariaca, L.

1998-01-01

In marine atmospheres the deposition of saline particles on the surface of metals intensifies the metallic corrosion process. However, quantitative information about the effect of atmospheric salinity on metallic corrosion is very scarce. This paper reports the relationship between salinity and metallic corrosion, where a clear linear relation (r=0.97) has been found for a broad interval of salinities (4-500 mg Cl''-/m''2.d), as well as the relationship between salinity (or metallic corrosion) and distance from the coast. A hyperbolic function seems to be established both variables; there is an exponential drop in salinity (or corrosion) as shoreline distance increases tending towards and asymptotic value. The study has been based on information obtained from field research conducted at a marine atmosphere in Tarragona (Spain) and data compiled from the literature. (Author) 14 refs

Distance : between deixis and perspectivity

OpenAIRE

Meermann, Anastasia; Sonnenhauser, Barbara

2015-01-01

Discussing exemplary applications of the notion of distance in linguistic analysis, this paper shows that very different phenomena are described in terms of this concept. It is argued that in order to overcome the problems arising from this mixup, deixis, distance and perspectivity have to be distinguished and their interrelations need to be described. Thereby, distance emerges as part of a recursive process mediating between situation-bound deixis and discourse-level perspectivity. This is i...

Dynamics of an N-vortex state at small distances

Science.gov (United States)

Ovchinnikov, Yu. N.

2013-01-01

We investigate the dynamics of a state of N vortices, placed at the initial instant at small distances from some point, close to the "weight center" of vortices. The general solution of the time-dependent Ginsburg-Landau equation for N vortices in a large time interval is found. For N = 2, the position of the "weight center" of two vortices is time independent. For N ≥ 3, the position of the "weight center" weakly depends on time and is located in the range of the order of a 3, where a is a characteristic distance of a single vortex from the "weight center." For N = 3, the time evolution of the N-vortex state is fixed by the position of vortices at any time instant and by the values of two small parameters. For N ≥ 4, a new parameter arises in the problem, connected with relative increases in the number of decay modes.

Dynamics of an N-vortex state at small distances

International Nuclear Information System (INIS)

Ovchinnikov, Yu. N.

2013-01-01

We investigate the dynamics of a state of N vortices, placed at the initial instant at small distances from some point, close to the “weight center” of vortices. The general solution of the time-dependent Ginsburg-Landau equation for N vortices in a large time interval is found. For N = 2, the position of the “weight center” of two vortices is time independent. For N ≥ 3, the position of the “weight center” weakly depends on time and is located in the range of the order of a 3 , where a is a characteristic distance of a single vortex from the “weight center.” For N = 3, the time evolution of the N-vortex state is fixed by the position of vortices at any time instant and by the values of two small parameters. For N ≥ 4, a new parameter arises in the problem, connected with relative increases in the number of decay modes.

Dynamics of an N-vortex state at small distances

Energy Technology Data Exchange (ETDEWEB)

Ovchinnikov, Yu. N., E-mail: ovc@itp.ac.ru [Max-Planck Institute for Physics of Complex Systems (Germany)

2013-01-15

We investigate the dynamics of a state of N vortices, placed at the initial instant at small distances from some point, close to the 'weight center' of vortices. The general solution of the time-dependent Ginsburg-Landau equation for N vortices in a large time interval is found. For N = 2, the position of the 'weight center' of two vortices is time independent. For N {>=} 3, the position of the 'weight center' weakly depends on time and is located in the range of the order of a{sup 3}, where a is a characteristic distance of a single vortex from the 'weight center.' For N = 3, the time evolution of the N-vortex state is fixed by the position of vortices at any time instant and by the values of two small parameters. For N {>=} 4, a new parameter arises in the problem, connected with relative increases in the number of decay modes.

Acculturative family distancing (AFD) and depression in Chinese American families.

Science.gov (United States)

Hwang, Wei-Chin; Wood, Jeffrey J; Fujimoto, Ken

2010-10-01

Knowledge of acculturative processes and their impact on immigrant families remains quite limited. Acculturative family distancing (AFD) is the distancing that occurs between immigrant parents and their children and is caused by breakdowns in communication and cultural value differences. It is a more proximal and problem-focused formulation of the acculturation gap and is hypothesized to increase depression via family conflict. Data were collected from 105 Chinese American high school students and their mothers. Rasch modeling was used to refine the AFD measure, and structural equation modeling was used to determine the effects of AFD on youth and maternal depression. Findings indicate that greater AFD was associated with higher depressive symptoms and risk for clinical depression. Family conflict partially mediated this relation for youths, whereas for mothers, AFD directly increased risk for depression. Greater mother-child heritage enculturation discrepancies were associated with greater mother and child AFD. Mainstream acculturation discrepancies and language gaps between mothers and youths were not significantly associated with any of the primary outcome variables. Results highlight the need for better understanding of how AFD and other acculturation-gap phenomena affect immigrant mental health. They also underscore the need for prevention and intervention programs that target communication difficulties and intergenerational cultural value differences. Copyright 2010 APA, all rights reserved.

Computing the Skewness of the Phylogenetic Mean Pairwise Distance in Linear Time

DEFF Research Database (Denmark)

Tsirogiannis, Constantinos; Sandel, Brody Steven

2014-01-01

The phylogenetic Mean Pairwise Distance (MPD) is one of the most popular measures for computing the phylogenetic distance between a given group of species. More specifically, for a phylogenetic tree and for a set of species R represented by a subset of the leaf nodes of , the MPD of R is equal...... to the average cost of all possible simple paths in that connect pairs of nodes in R. Among other phylogenetic measures, the MPD is used as a tool for deciding if the species of a given group R are closely related. To do this, it is important to compute not only the value of the MPD for this group but also...

Implementation of an Improved Safe Operating Envelope

Energy Technology Data Exchange (ETDEWEB)

Prime, Robyn; McIntyre, Mark [NB Power Nuclear, P.O. Box 600, Lepreau, NB (Canada); Reeves, David [Atlantic Nuclear Services Ltd., PO Box 1268 Fredericton, NB (Canada)

2008-07-01

This paper is a continuation of the paper presented at IYNC 2004 on 'The Definition of a Safe Operating Envelope'. The current paper concentrates on the implementation process of the Safe Operating Envelope employed at the Point Lepreau Generating Station. (authors)

From Safe Systems to Patient Safety

DEFF Research Database (Denmark)

Aarts, J.; Nøhr, C.

2010-01-01

for the third conference with the theme: The ability to design, implement and evaluate safe, useable and effective systems within complex health care organizations. The theme for this conference was "Designing and Implementing Health IT: from safe systems to patient safety". The contributions have reflected...... and implementation of safe systems and thus contribute to the agenda of patient safety? The contributions demonstrate how the health informatics community has contributed to the performance of significant research and to translating research findings to develop health care delivery and improve patient safety......This volume presents the papers from the fourth International Conference on Information Technology in Health Care: Socio-technical Approaches held in Aalborg, Denmark in June 2010. In 2001 the first conference was held in Rotterdam, The Netherlands with the theme: Sociotechnical' approaches...

The distances of the Galactic Novae

Science.gov (United States)

Ozdonmez, Aykut; Guver, Tolga; Cabrera-Lavers, Antonio; Ak, Tansel

2016-07-01

Using location of the RC stars on the CMDs obtained from the UKIDSS, VISTA and 2MASS photometry, we have derived the reddening-distance relations towards each Galactic nova for which at least one independent reddening measurement exists. We were able to determine the distances of 72 Galactic novae and set lower limits on the distances of 45 systems. The reddening curves of the systems are presented. These curves can be also used to estimate reddening or the distance of any source, whose location is close to the position of the nova in our sample. The distance measurement method in our study can be easily applicable to any source, especially for ones that concentrated along the Galactic plane.

The first safe country

Directory of Open Access Journals (Sweden)

Raffaela Puggioni

2012-06-01

Full Text Available The Dublin II Regulation makes the first safe country of refuge solelyresponsible for refugees and asylum seekers. In the case of Italy, thefirst responsible country has not been acting responsibly.

Karate: Keep It Safe.

Science.gov (United States)

Jordan, David

1981-01-01

Safety guidelines for each phase of a karate practice session are presented to provide an accident-free and safe environment for teaching karate in a physical education or traditional karate training program. (JMF)

The prognostic value of tip-to-apex distance (TAD index in intertrochanteric fractures fixed by dynamic hip screw

Directory of Open Access Journals (Sweden)

Ali Sadighi

2012-11-01

Full Text Available Intertrochanteric fractures (ITFs are the most common type of fractures requiring surgical intervention. They also have the highest surgical mortality among orthopedic operations. Among the many different techniques used for fixation of this type of fracture, use of the Dynamic Hip Screw (DHS has gained wide acceptance. This current study was designed to assess positive predictive value of tip-to-apex distance (TAD index in the prognosis of patients treated with DHS. The study was designed according to a descriptive-analytic protocol, made up of 100 cases of ITFs caused by falling, treated in the Shohada Orthopedic Center, Tabriz, Iran. All patients underwent lateral and antero-posterior hip X-ray to measure TAD index. The cohort was followed for three months after DHS placement. Of a total of 100 cases (53 male, 47 female with a mean age of 76.7 years (range 29-100 years, 43% had grade 4, 29% grade 3, 21% grade 5, 5% grade 2 and 2% grade 6 osteoporosis. The screw position was postero-inferior in 57%, central in 40% and superior in 3% of patients. Minimum and maximum TAD index were 20 and 28 mm, respectively. Mean TAD was 23.5 mm. There were no post-operative complications in 84% of cases. Screw failure was the most common complication in the remaining 16% of patients. The study shows a statistically significant correlation between TAD index and cut-off rate in patients with intertrochanteric fractures of femoral bone treated by DHS. This validates the use of TAD index in determining the prognosis of patients treated by DHS.

ETUDE - European Trade Union Distance Education.

Science.gov (United States)

Creanor, Linda; Walker, Steve

2000-01-01

Describes transnational distance learning activities among European trade union educators carried out as part of the European Trade Union Distance Education (ETUDE) project, supported by the European Commission. Highlights include the context of international trade union distance education; tutor training course; tutors' experiences; and…

Prepare to protect: Operating and maintaining a tornado safe room.

Science.gov (United States)

Herseth, Andrew; Goldsmith-Grinspoon, Jennifer; Scott, Pataya

2017-06-01

Operating and maintaining a tornado safe room can be critical to the effective continuity of business operations because a firm's most valuable asset is its people. This paper describes aspects of operations and maintenance (O&M) for existing tornado safe rooms as well as a few planning and design aspects that affect the ultimate operation of a safe room for situations where a safe room is planned, but not yet constructed. The information is based on several Federal Emergency Management Agency safe room publications that provide guidance on emergency management and operations, as well as the design and construction of tornado safe rooms.

Multimedia Exercise Training Program Improves Distance Walked, Heart Rate Recovery, and Self-efficacy in Cardiac Surgery Patients.

Science.gov (United States)

Wang, Li-Wei; Ou, Shu-Hua; Tsai, Chien-Sung; Chang, Yue-Cune; Kao, Chi-Wen

2016-01-01

Patient education has been shown to be more effective when delivered using multimedia than written materials. However, the effects of using multimedia to assist patients in cardiac rehabilitation have not been investigated. The purpose of this study is to examine the effect of an inpatient multimedia exercise training program on distance walked in the 6-minute walking test (6MWT), heart rate recovery, and walking self-efficacy of patients who had undergone heart surgery. For this longitudinal quasi-experimental study, 60 consecutive patients were assigned to an experimental (n = 20; inpatient multimedia exercise training program) or control (n = 40; routine care) group. Data were collected at 3 times (before surgery, 1 to 2 days before hospital discharge, and 1 month after hospital discharge) and analyzed with the generalized estimating equation approach. Most subjects were men (66.7%), had a mean age of 61.32 ± 13.4 years and left ventricular ejection fraction of 56.96% ± 13.28%, and underwent coronary artery bypass graft surgery (n = 34, 56.7%). Subjects receiving the exercise training program showed significantly greater improvement than those in the control group in the 6MWT walking distance (P self-efficacy (P = .002) at hospital discharge. Furthermore, the intervention effects on 6MWT distance (P self-efficacy (P exercise training program safely improved distance walked in the 6MWT, heart rate recovery, and self-efficacy at hospital discharge in patients after heart surgery and maintained their improvement in 6MWT and self-efficacy 1 month later.

A definition of distance and method of making space-time measurements

International Nuclear Information System (INIS)

Brisson, D.W.

1980-01-01

The paper explores an extended definition of the absolute value of a complex number and thus a new definition of distance. This new definition, called the nabsolute value of a complex number, is (Z) where Z = (a or ia) + (b or ib), so that (Z) is equivalent to [α 2 + β 2 ]sup(1/2), and α = a or ia, β = b or ib. This is shown on a superimposed X,Y plot and iX,iY plot so that four dimensions are represented in a plane. The application of this scheme to space-time measurement is then identified with the Minkowski Plane which has identical properties with the complex plane, with this new interpretation of the absolute value of a complex number. (Auth.)

A qualitative study of safe abortion and post-abortion family planning service experiences of women attending private facilities in Kenya.

Science.gov (United States)

Penfold, Suzanne; Wendot, Susy; Nafula, Inviolata; Footman, Katharine

2018-04-24

To inform improvements in safe abortion and post-abortion family planning (PAFP) services, this study aimed to explore the pathways, decision-making, experiences and preferences of women receiving safe abortion and post-abortion family planning (PAFP) at private clinics in western Kenya. We conducted semi-structured interviews with 22 women who had recently used a safe abortion service from a private clinic. Interviews explored abortion-seeking behaviour and decision-making, abortion experience, use and knowledge of contraception, experience of PAFP counselling, and perceived facilitators of and challenges to family planning use. Respondents discovered their pregnancies due to physical symptoms, which were confirmed using pregnancy testing kits, often purchased from pharmacies. Respondents usually discussed their abortion decision with their partner, and, sometimes, carefully-selected friends or family members. Some reported being referred to private clinics for abortion services directly from other providers. Others had more complex pathways, first seeking care from unsafe providers, trying to self-induce abortion, being turned away from alternative safe facilities that were closed or too busy, or taking time to gather financial resources to pay for care. Participants wanted to use abortion services at facilities reputed for being accessible, clean, medically safe, and offering quick, respectful, private and courteous services. Awareness of reputable clinics was gained through personal experience, and recommendations from contacts and other health providers. Most participants had previously used contraception, with some reports of incorrect use and many reports of side effects. PAFP counselling was valued by clients, but some accounts suggested the counselling lacked comprehensive information. Many women chose contraception immediately following PAFP counselling; but others wanted to delay decision-making about contraception until the abortion was complete

Safe actinide disposition in molten salt reactors

International Nuclear Information System (INIS)

Gat, U.

1997-01-01

Safe molten salt reactors (MSR) can readily accommodate the burning of all fissile actinides. Only minor compromises associated with plutonium are required. The MSRs can dispose safely of actinides and long lived isotopes to result in safer and simpler waste. Disposing of actinides in MSRs does increase the source term of a safety optimized MSR. It is concluded that the burning and transmutation of actinides in MSRs can be done in a safe manner. Development is needed for the processing to handle and separate the actinides. Calculations are needed to establish the neutron economy and the fuel management. 9 refs

Safe Sleep for Babies

Science.gov (United States)

... 5 MB] Read the MMWR Science Clips Safe Sleep for Babies Eliminating hazards Recommend on Facebook Tweet ... Page Problem Every year, there are thousands of sleep-related deaths among babies. View large image and ...

Space-efficient path-reporting approximate distance oracles

DEFF Research Database (Denmark)

Elkin, Michael; Neiman, Ofer; Wulff-Nilsen, Christian

2016-01-01

We consider approximate path-reporting distance oracles, distance labeling and labeled routing with extremely low space requirements, for general undirected graphs. For distance oracles, we show how to break the nlog⁡n space bound of Thorup and Zwick if approximate paths rather than distances need...

Combined resection–recession versus combined recession–retroequatorial myopexy of medial rectus muscles for treatment of near-distance disparity Esotropia

Directory of Open Access Journals (Sweden)

Ghali MA

2017-06-01

Full Text Available Manar A Ghali Ophthalmology Department, Faculty of Medicine, Zagazig University, Zagazig, Egypt Purpose: To compare and evaluate the efficacy of two different surgical techniques for the treatment of near-distance disparity esotropia; combined resection–recession and recession–retroequatorial myopexy of medial rectus muscles. Patients and methods: This prospective study included 28 patients diagnosed with convergence excess esotropia who had worn their full cycloplegic refraction and/or bifocal glasses for at least 6 months and still had near-distance disparity esotropia. The patients were divided into 2 groups; Group I underwent combined bimedial rectus muscles resection 2.5 mm from the insertion end with recession based on near-angle esotropia according to current surgical tables with 1 mm add of recession for each muscle, while Group II underwent bimedial recession based on far angle combined with retroequatorial myopexy at 13–14 mm from insertion. A satisfactory result was defined as orthophoria or esotropia <10 prism diopters (∆ at near and distance with reduction of the near-distance disparity to <10 ∆. The patients were followed up for at least 2 years for stability of correction and late onset consecutive exotropia. Results: In Group I, all the patients had satisfactory alignments at near and far with residual near–far disparity ≤10 ∆, no cases of overcorrection at far was reported; while in Group II, all cases had orthophoria at far, but 4 cases (28.6% showed near–far disparity >10 ∆. Conclusion: The technique of combined resection–recession is safe, easy and more effective in the treatment of near-distance disparity esotropia regardless of the level of accommodative convergence/accommodation ratio, with stability of results though longer follow-up period is still needed. Keywords: near-distance disparity, esotropia, Ac/A ratio, retroequatorial myopexy, slanted recession

What do long-distance caregivers do? : judgment of propositions and the epistemics of long-distance family relationships

OpenAIRE

中川, 敦; Atsushi, NAKAGAWA

2015-01-01

This study clarifies what long-distance caregivers do. To this end, I conducted a conversation analysis of video data of a care conference in which a long-distance caregiver participated. When a professional caregiver proposes a care plan to a long-distance caregiver, he/she substitutes technical terms with laymen terms for easy understanding, indicating his/her orientation that a long-distance caregiver is not a professional. However, if the caregiver laughs or averts his/her eyes during the...

The Relation Between Distance Education Students' Motivation And Satisfaction

Directory of Open Access Journals (Sweden)

Dimitrios GOULIMARIS

2015-04-01

Full Text Available The aim of the present study, within the frame of self-determination theory (SDT, was triple: a to examine the structural validity of the “Situational Motivation Scale” (SIMS in the field of distance education, b to investigate the correlation between the subscales of the motivation and satisfaction of students who attend distance education classes and c to examine the possibility of predicting the subscales of satisfaction from the subscales of motivation in the open and distance education. The sample consisted of 144 students who participated in the course of “Arts II: Overview of Greek Music and Dance” of the Hellenic Open University. For the purposes of the study, two scales were used: a The modified Greek version (Papaioannou et al., 2007 of the “Situational Motivation Scale” (SIMS (Guay et al., 2000, b The modified Greek version (Theodorakis, & Bebetsos, 2003; Bebetsos, & Theodorakis, 2003 of the “Scale of Satisfaction” (Chelladurai & Riemer, 1997. The results of the research are considered positive for the adjustment of the instrument measuring the motivation of students in distance education. Identified regulation and intrinsic motivation presented high values, as much as the two subscales of satisfaction: personal outcome and leadership. Extrinsic motivation presented middle levels and the subscale amotivation, very low levels. The subscale personal outcome is connected positively to the self-determined forms of motivation and negatively to those which are less self-determined. Finally, it has been found that intrinsic motivation and amotivation are subscales which predict personal outcome and leadership. In conclusion, the findings of this research allow a better understanding of the motivation process, which explains the satisfaction of the students, while attending a class.

THE RELATION BETWEEN DISTANCE EDUCATION STUDENTS MOTIVATION AND SATISFACTION

Directory of Open Access Journals (Sweden)

Dimitrios GOULIMARIS

2015-04-01

Full Text Available The aim of the present study, within the frame of self-determination theory (SDT, was triple: a to examine the structural validity of the “Situational Motivation Scale” (SIMS in the field of distance education, b to investigate the correlation between the subscales of the motivation and satisfaction of students who attend distance education classes and c to examine the possibility of predicting the subscales of satisfaction from the subscales of motivation in the open and distance education. The sample consisted of 144 students who participated in the course of “Arts II: Overview of Greek Music and Dance” of the Hellenic Open University. For the purposes of the study, two scales were used: a The modified Greek version (Papaioannou et al., 2007 of the “Situational Motivation Scale” (SIMS (Guay et al., 2000, b The modified Greek version (Theodorakis, & Bebetsos, 2003; Bebetsos, & Theodorakis, 2003 of the “Scale of Satisfaction” (Chelladurai & Riemer, 1997. The results of the research are considered positive for the adjustment of the instrument measuring the motivation of students in distance education. Identified regulation and intrinsic motivation presented high values, as much as the two subscales of satisfaction: personal outcome and leadership. Extrinsic motivation presented middle levels and the subscale amotivation, very low levels. The subscale personal outcome is connected positively to the self-determined forms of motivation and negatively to those which are less self-determined. Finally, it has been found that intrinsic motivation and amotivation are subscales which predict personal outcome and leadership. In conclusion, the findings of this research allow a better understanding of the motivation process, which explains the satisfaction of the students, while attending a class.

Escola segura Safe school

Directory of Open Access Journals (Sweden)

Edson Ferreira Liberal

2005-11-01

Full Text Available OBJETIVO: Revisão das estratégias para tornar o ambiente escolar seguro. Inicialmente os autores contextualizam a violência e os acidentes no ambiente escolar e fazem recomendações, baseadas em dados da literatura, para a implantação de escolas seguras. FONTE DE DADOS: Artigos publicados entre 1993 e 2005 na base de dados MEDLINE. Dados nacionais epidemiológicos e da literatura também foram pesquisados. SÍNTESE DOS DADOS: Há evidência crescente de que a intervenção tem múltiplos componentes. O foco político é a prática em educação em saúde com o envolvimento de toda a comunidade. O norte dessas intervenções é ajudar estudantes e toda a comunidade a adotar um comportamento seguro e saudável. As escolas estão assumindo um envolvimento crescente na promoção da saúde, prevenção de doenças e prevenção de trauma. Nesse contexto de prevenção de causas externas de morbimortalidade, é importante reconhecer o risco ambiental, locais e comportamentos de risco como favoráveis ao trauma e à violência, além de um novo conceito de acidentes como algo que possa ser evitado. CONCLUSÃO: A implementação da escola segura representa uma nova direção promissora para o trabalho preventivo baseado na escola. É importante notar que uma escola segura deve intervir não meramente na sua estrutura física, mas também torná-la tão segura quanto possível, trabalhando com a comunidade escolar por meio de educação em saúde, discutindo principalmente o comportamento saudável.OBJECTIVE: To review the strategies to make school a safe environment. The paper first addresses the social context of accidents and violence in the school environment, and makes recommendations, based on the literature data, for the implementation of safe schools. SOURCE OF DATA: Articles published between 1993 and 2005 in the MEDLINE database. Brazilian epidemiological and literature data have also been searched. SUMMARY OF THE FINDINGS: There is

Buying & Using Medicine Safely

Science.gov (United States)

... Reducers Safe Daily Use of Aspirin Medication Health Fraud Resources for You FDA Consumer Updates (Drugs) Page ... feeds Follow FDA on Twitter Follow FDA on Facebook View FDA videos on YouTube View FDA photos ...

Phylogenetic inference with weighted codon evolutionary distances.

Science.gov (United States)

Criscuolo, Alexis; Michel, Christian J

2009-04-01

We develop a new approach to estimate a matrix of pairwise evolutionary distances from a codon-based alignment based on a codon evolutionary model. The method first computes a standard distance matrix for each of the three codon positions. Then these three distance matrices are weighted according to an estimate of the global evolutionary rate of each codon position and averaged into a unique distance matrix. Using a large set of both real and simulated codon-based alignments of nucleotide sequences, we show that this approach leads to distance matrices that have a significantly better treelikeness compared to those obtained by standard nucleotide evolutionary distances. We also propose an alternative weighting to eliminate the part of the noise often associated with some codon positions, particularly the third position, which is known to induce a fast evolutionary rate. Simulation results show that fast distance-based tree reconstruction algorithms on distance matrices based on this codon position weighting can lead to phylogenetic trees that are at least as accurate as, if not better, than those inferred by maximum likelihood. Finally, a well-known multigene dataset composed of eight yeast species and 106 codon-based alignments is reanalyzed and shows that our codon evolutionary distances allow building a phylogenetic tree which is similar to those obtained by non-distance-based methods (e.g., maximum parsimony and maximum likelihood) and also significantly improved compared to standard nucleotide evolutionary distance estimates.

Distance Education at Silesian University of Technology

Directory of Open Access Journals (Sweden)

Piotr Klosowski

2008-12-01

Full Text Available This paper presents Distance Learning Platform used by Silesian University of Technology. Distance Learning Platform is based on modular object-oriented dynamic learning environment, represents LMS (Learning Management Systems technology, a software package designed to help educators create quality online courses. Currently on Distance Learning Platform at Silesian University of Technology are available over 520 online courses created for students of twelve University's faculties. Number of Distance Learning Platform users exceeds 12000. Distance Learning Platform works as typically asynchronous e-learning service, but in the future more synchronous e-learning services will be added. Distance Learning Platform has great potential to create a successful elearning experience by providing a plethora of excellent tools that can be used to enhance conventional classroom instruction, in hybrid courses, or any distance learning arrangements.

Effect of race distance on muscle oxygenation in short-track speed skating.

Science.gov (United States)

Hesford, Catherine M; Laing, Stewart; Cardinale, Marco; Cooper, Chris E

2013-01-01

Previous work identified an asymmetry in tissue desaturation changes in the left and right quadriceps muscles during on-ice skating at maximal speed in males. The effect of changing race distance on the magnitude of desaturation or leg asymmetry is unknown. Six elite male skaters (age = 23 ± 1.8 yr, height = 1.8 ± 0.1 m, mass = 80.1 ± 5.7 kg, midthigh skinfold thickness = 7 ± 2 mm) and four elite female skaters (age = 21 ± 4 yr, height = 1.6 ± 0.1 m, mass = 65.2 ± 4.3 kg, midthigh skinfold thickness = 10 ± 1 mm) were studied. Subjects completed time trials over three race distances. Blood lactate concentration and O2 uptake measurements were combined with near-infrared spectroscopy measures of muscle oxygenation (TSI) and blood volume (tHb) in the right and left vastus lateralis. Neither race distance nor gender had a significant effect on the magnitude of maximal muscle desaturation (ΔTSI(max)). Pattern of local changes in tHb during individual laps was dependent upon subtle differences in skating technique used for the different race distances. Linear regression analysis revealed asymmetry between the right and left leg desaturation in males during the final stages of each race distance, but not in females. At all race distances, local muscle desaturation reached maximal values much more quickly than global VO(2peak). The use of wearable near-infrared spectroscopy devices enabled measurement of muscle oxygenation during competitive race simulation, thus providing unique insight into the effects of velocity and technique changes on local muscle oxygenation. This may have implications for training and race pacing in speed skating.

Design and Performance Analysis of an Intrinsically Safe Ultrasonic Ranging Sensor.

Science.gov (United States)

Zhang, Hongjuan; Wang, Yu; Zhang, Xu; Wang, Dong; Jin, Baoquan

2016-06-13

In flammable or explosive environments, an ultrasonic sensor for distance measurement poses an important engineering safety challenge, because the driving circuit uses an intermediate frequency transformer as an impedance transformation element, in which the produced heat or spark is available for ignition. In this paper, an intrinsically safe ultrasonic ranging sensor is designed and implemented. The waterproof piezoelectric transducer with integrated transceiver is chosen as an energy transducing element. Then a novel transducer driving circuit is designed based on an impedance matching method considering safety spark parameters to replace an intermediate frequency transformer. Then, an energy limiting circuit is developed to achieve dual levels of over-voltage and over-current protection. The detail calculation and evaluation are executed and the electrical characteristics are analyzed to verify the intrinsic safety of the driving circuit. Finally, an experimental platform of the ultrasonic ranging sensor system is constructed, which involves short-circuit protection. Experimental results show that the proposed ultrasonic ranging sensor is excellent in both ranging performance and intrinsic safety.

Virus Alert: Ten Steps to Safe Computing.

Science.gov (United States)

Gunter, Glenda A.

1997-01-01

Discusses computer viruses and explains how to detect them; discusses virus protection and the need to update antivirus software; and offers 10 safe computing tips, including scanning floppy disks and commercial software, how to safely download files from the Internet, avoiding pirated software copies, and backing up files. (LRW)

Olfaction-based Detection Distance: A Quantitative Analysis of How Far Away Dogs Recognize Tortoise Odor and Follow It to Source

Directory of Open Access Journals (Sweden)

Cindee Valentin

2008-03-01

Full Text Available The use of detector dogs has been demonstrated to be effective and safe for finding Mojave desert tortoises and provides certain advantages over humans in field surveys. Unlike humans who rely on visual cues for target identification, dogs use primarily olfactory cues and can therefore locate targets that are not visually obvious. One of the key benefits of surveying with dogs is their efficiency at covering ground and their ability to detect targets from long distances. Dogs may investigate potential targets using visual cues but confirm the presence of a target based on scent. Everything that emits odor does so via vapor-phase molecules and the components comprising a particular scent are carried primarily though bulk movement of the atmosphere. It is the ability to search for target odor and then go to its source that makes dogs ideal for rapid target recognition in the field setting. Using tortoises as targets, we quantified distances that dogs detected tortoise scent, followed it to source, and correctly identified tortoises as targets. Detection distance data were collected during experimental trials with advanced global positioning system (GPS technology and then analyzed using geographic information system (GIS modeling techniques. Detection distances ranged from 0.5 m to 62.8 m for tortoises on the surface. We did not observe bias with tortoise size, age class, sex or the degree to which tortoises were handled prior to being found by the dogs. The methodology we developed to quantify olfaction-based detection distance using dogs can be applied to other targets that dogs are trained to find.

A Streaming Distance Transform Algorithm for Neighborhood-Sequence Distances

Directory of Open Access Journals (Sweden)

Nicolas Normand

2014-09-01

Full Text Available We describe an algorithm that computes a “translated” 2D Neighborhood-Sequence Distance Transform (DT using a look up table approach. It requires a single raster scan of the input image and produces one line of output for every line of input. The neighborhood sequence is specified either by providing one period of some integer periodic sequence or by providing the rate of appearance of neighborhoods. The full algorithm optionally derives the regular (centered DT from the “translated” DT, providing the result image on-the-fly, with a minimal delay, before the input image is fully processed. Its efficiency can benefit all applications that use neighborhood- sequence distances, particularly when pipelined processing architectures are involved, or when the size of objects in the source image is limited.

Towards eye-safe standoff Raman imaging systems

Science.gov (United States)

Glimtoft, Martin; Bââth, Petra; Saari, Heikki; Mäkynen, Jussi; Näsilä, Antti; Östmark, Henric

2014-05-01

Standoff Raman imaging systems have shown the ability to detect single explosives particles. However, in many cases, the laser intensities needed restrict the applications where they can be safely used. A new generation imaging Raman system has been developed based on a 355 nm UV laser that, in addition to eye safety, allows discrete and invisible measurements. Non-dangerous exposure levels for the eye are several orders of magnitude higher in UVA than in the visible range that previously has been used. The UV Raman system has been built based on an UV Fabry-Perot Interferometer (UV-FPI) developed by VTT. The design allows for precise selection of Raman shifts in combination with high out-of-band blocking. The stable operation of the UV-FPI module under varying environmental conditions is arranged by controlling the temperature of the module and using a closed loop control of the FPI air gap based on capacitive measurement. The system presented consists of a 3rd harmonics Nd:YAG laser with 1.5 W average output at 1000 Hz, a 200 mm Schmidt-Cassegrain telescope, UV-FPI filter and an ICCD camera for signal gating and detection. The design principal leads to a Raman spectrum in each image pixel. The system is designed for field use and easy manoeuvring. Preliminary results show that in measurements of <60 s on 10 m distance, single AN particles of <300 μm diameter can be identified.

Rational use of Jatropha curcas L. in food and medicine: from toxicity problems to safe applications

OpenAIRE

Insanu, Muhamad

2014-01-01

Jatropha curcas L. is natural sources of biodiesel. It has high potential economic values. Different parts of J. curcas have their own potencies, unfortunately these were not known by the farmers. The aim of this thesis is to give an overview of the additional values of Jatropha curcas L. by characterization of its natural products that can be used as a safe pharmaceutical product. In addition the detoxification of the plant cake allowing it to be used for animal stock has been researched. Th...

Safe driving for teens

Science.gov (United States)

Driving and teenagers; Teens and safe driving; Automobile safety - teenage drivers ... months before taking friends as passengers. Teenage-related driving deaths occur more often in certain conditions. OTHER SAFETY TIPS FOR TEENS Reckless driving is still a ...

Cepheids Geometrical Distances Using Space Interferometry

Science.gov (United States)

Marengo, M.; Karovska, M.; Sasselov, D. D.; Sanchez, M.

2004-05-01

A space based interferometer with a sub-milliarcsecond resolution in the UV-optical will provide a new avenue for the calibration of primary distance indicators with unprecedented accuracy, by allowing very accurate and stable measurements of Cepheids pulsation amplitudes at wavelengths not accessible from the ground. Sasselov & Karovska (1994) have shown that interferometers allow very accurate measurements of Cepheids distances by using a ``geometric'' variant of the Baade-Wesselink method. This method has been succesfully applied to derive distances and radii of nearby Cepheids using ground-based near-IR and optical interferometers, within a 15% accuracy level. Our study shows that the main source of error in these measurements is due to the perturbing effects of the Earth atmosphere, which is the limiting factor in the interferometer stability. A space interferometer will not suffer from this intrinsic limitations, and can potentially lead to improve astronomical distance measurements by an order of magnitude in precision. We discuss here the technical requirements that a space based facility will need to carry out this project, allowing distance measurements within a few percent accuracy level. We will finally discuss how a sub-milliarcsecond resolution will allow the direct distance determination for hundreds of galactic sources, and provide a substantial improvement in the zero-point of the Cepheid distance scale.

THE WEIGHTED POINCARÉ DISTANCE IN THE HALF PLANE

OpenAIRE

Byun, Jisoo; Baek, Seung Min; Cho, Hong Rae; Lee, Han-Wool

2014-01-01

In this paper we introduce the weighted Poincaré distance and the induced distance by the weighted Bloch type space. We prove that the weighted Poincaré distance is identical to the inner distance generated by the induced distance.

Computing Distances between Probabilistic Automata

Directory of Open Access Journals (Sweden)

Mathieu Tracol

2011-07-01

Full Text Available We present relaxed notions of simulation and bisimulation on Probabilistic Automata (PA, that allow some error epsilon. When epsilon is zero we retrieve the usual notions of bisimulation and simulation on PAs. We give logical characterisations of these notions by choosing suitable logics which differ from the elementary ones, L with negation and L without negation, by the modal operator. Using flow networks, we show how to compute the relations in PTIME. This allows the definition of an efficiently computable non-discounted distance between the states of a PA. A natural modification of this distance is introduced, to obtain a discounted distance, which weakens the influence of long term transitions. We compare our notions of distance to others previously defined and illustrate our approach on various examples. We also show that our distance is not expansive with respect to process algebra operators. Although L without negation is a suitable logic to characterise epsilon-(bisimulation on deterministic PAs, it is not for general PAs; interestingly, we prove that it does characterise weaker notions, called a priori epsilon-(bisimulation, which we prove to be NP-difficult to decide.

Safe operation of critical assemblies and research reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1960-09-15

Some countries have accumulated considerable experience in the operation of these reactors and have in the process developed safe practices. On the other hand, other countries which have recently acquired, or will soon acquire, such reactors do not have sufficient background of experience with them to have developed full knowledge regarding their safe operation. In this situation, the International Atomic Energy Agency has considered that it would be useful to make available to all its Member States a set of recommendations on the safe operation of these reactors, based on the accumulated experience and best practices. The Director General accordingly nominated a Pane Ion Safe Operation of Critical Assemblies and Research Reactors to assist the Agency's Secretariat in drafting such recommendations

A tentative theory of large distance physics

International Nuclear Information System (INIS)

Friedan, Daniel

2003-01-01

A theoretical mechanism is devised to determine the large distance physics of spacetime. It is a two dimensional nonlinear model, the lambda model, set to govern the string world surface in an attempt to remedy the failure of string theory, as it stands. The lambda model is formulated to cancel the infrared divergent effects of handles at short distance on the world surface. The target manifold is the manifold of background spacetimes. The coupling strength is the spacetime coupling constant. The lambda model operates at 2d distance Δ -1 , very much shorter than the 2d distance μ -1 where the world surface is seen. A large characteristic spacetime distance L is given by L 2 ln(Δ/μ). Spacetime fields of wave number up to 1=L are the local coordinates for the manifold of spacetimes. The distribution of fluctuations at 2d distances shorter than Δ -1 gives the a priori measure on the target manifold, the manifold of spacetimes. If this measure concentrates at a macroscopic spacetime, then, nearby, it is a measure on the spacetime fields. The lambda model thereby constructs a spacetime quantum field theory, cutoff at ultraviolet distance L, describing physics at distances larger than L. The lambda model also constructs an effective string theory with infrared cutoff L, describing physics at distances smaller than L. The lambda model evolves outward from zero 2d distance, Δ -1 = 0, building spacetime physics starting from L ∞ and proceeding downward in L. L can be taken smaller than any distance practical for experiments, so the lambda model, if right, gives all actually observable physics. The harmonic surfaces in the manifold of spacetimes are expected to have novel nonperturbative effects at large distances. (author)

Analysing designed experiments in distance sampling

Science.gov (United States)

Stephen T. Buckland; Robin E. Russell; Brett G. Dickson; Victoria A. Saab; Donal N. Gorman; William M. Block

2009-01-01

Distance sampling is a survey technique for estimating the abundance or density of wild animal populations. Detection probabilities of animals inherently differ by species, age class, habitats, or sex. By incorporating the change in an observer's ability to detect a particular class of animals as a function of distance, distance sampling leads to density estimates...

Elaboration of Safe Community Assessment System

Directory of Open Access Journals (Sweden)

Birutė Mikulskienė

2013-08-01

Full Text Available The paper aims to design an assessment system to monitor and evaluate safety parameters and administrative efforts with the purpose to increase safety in municipalities. The safety monitoring system considered is to be the most important tool for creation and development of safe communities in Lithuania. Several methods were applied to achieve this purpose. In order to determine the role of local government in ensuring the safety of people, property and environment at the local level of a meta-analysis of research reports, the Lithuanian national legislation, strategic planning documents of the state and local government were carried out. Analysis of statistical data, structural analysis, comparative analysis and synthesis methods were used while investigating the areas of safety uncertainty, risk groups, identifying safety risk factors, determining their relationship, and creating a safe community assessment system. A safe community assessment system, which consists of two types of criteria, has been elaborated. The assessment system is based on the multi-level criteria for safety monitoring and the multi-level criteria for the evaluation of municipal activities in the field of building safety. Links between the criteria, peculiarities of their application and advantages in the process of safe community creation and development are analyzed. Design and implementation of the safe community assessment system is one of the most important stages to implement the idea of safe communities. The proposed system integrates a variety of risk areas, the safety achievement criteria are linked to the criteria used in the strategic planning. Periodic assessment of the safety situation using the proposed system ensures possibility to monitor current local safety conditions and assess the changes and the trends. A safe community assessment system is proposed to be used as a tool to unified municipalities safety comprehensiveness and compare safety level in

Elaboration of Safe Community Assessment System

Directory of Open Access Journals (Sweden)

Algirdas Astrauskas

2011-12-01

Full Text Available The paper aims to design an assessment system to monitor and evaluate safety parameters and administrative efforts with the purpose to increase safety in municipalities. The safety monitoring system considered is to be the most important tool for creation anddevelopment of safe communities in Lithuania. Several methods were applied to achieve this purpose. In order to determine the role of local government in ensuring the safety of people, property and environment at the local level of a meta-analysis of research reports,the Lithuanian national legislation, strategic planning documents of the state and local government were carried out. Analysis of statistical data, structural analysis, comparative analysis and synthesis methods were used while investigating the areas of safety uncertainty, risk groups, identifying safety risk factors, determining their relationship, and creating a safe community assessment system.A safe community assessment system, which consists of two types of criteria, has been elaborated. The assessment system is based on the multi-level criteria for safety monitoring and the multi-level criteria for the evaluation of municipal activities in the field of building safety. Links between the criteria, peculiarities of their application and advantages in the process of safe community creation and development are analyzed.Design and implementation of the safe community assessment system is one of the most important stages to implement the idea of safe communities. The proposed system integrates a variety of risk areas, the safety achievement criteria are linked to the criteria used in thestrategic planning. Periodic assessment of the safety situation using the proposed system ensures possibility to monitor current local safety conditions and assess the changes and the trends. A safe community assessment system is proposed to be used as a tool to unified municipalities safety comprehensiveness and compare safety level in

Permutation-invariant distance between atomic configurations

Science.gov (United States)

Ferré, Grégoire; Maillet, Jean-Bernard; Stoltz, Gabriel

2015-09-01

We present a permutation-invariant distance between atomic configurations, defined through a functional representation of atomic positions. This distance enables us to directly compare different atomic environments with an arbitrary number of particles, without going through a space of reduced dimensionality (i.e., fingerprints) as an intermediate step. Moreover, this distance is naturally invariant through permutations of atoms, avoiding the time consuming associated minimization required by other common criteria (like the root mean square distance). Finally, the invariance through global rotations is accounted for by a minimization procedure in the space of rotations solved by Monte Carlo simulated annealing. A formal framework is also introduced, showing that the distance we propose verifies the property of a metric on the space of atomic configurations. Two examples of applications are proposed. The first one consists in evaluating faithfulness of some fingerprints (or descriptors), i.e., their capacity to represent the structural information of a configuration. The second application concerns structural analysis, where our distance proves to be efficient in discriminating different local structures and even classifying their degree of similarity.

Permutation-invariant distance between atomic configurations

International Nuclear Information System (INIS)

Ferré, Grégoire; Maillet, Jean-Bernard; Stoltz, Gabriel

2015-01-01

We present a permutation-invariant distance between atomic configurations, defined through a functional representation of atomic positions. This distance enables us to directly compare different atomic environments with an arbitrary number of particles, without going through a space of reduced dimensionality (i.e., fingerprints) as an intermediate step. Moreover, this distance is naturally invariant through permutations of atoms, avoiding the time consuming associated minimization required by other common criteria (like the root mean square distance). Finally, the invariance through global rotations is accounted for by a minimization procedure in the space of rotations solved by Monte Carlo simulated annealing. A formal framework is also introduced, showing that the distance we propose verifies the property of a metric on the space of atomic configurations. Two examples of applications are proposed. The first one consists in evaluating faithfulness of some fingerprints (or descriptors), i.e., their capacity to represent the structural information of a configuration. The second application concerns structural analysis, where our distance proves to be efficient in discriminating different local structures and even classifying their degree of similarity

Safe use of nanomaterials

CERN Multimedia

2013-01-01

The use of nanomaterials  is on the increase worldwide, including at CERN. The HSE Unit has established a safety guideline to inform you of the main requirements for the safe handling and disposal of nanomaterials at CERN.   A risk assessment tool has also been developed which guides the user through the process of evaluating the risk for his or her activity. Based on the calculated risk level, the tool provides a list of recommended control measures.   We would therefore like to draw your attention to: Safety Guideline C-0-0-5 - Safe handling and disposal of nanomaterials; and Safety Form C-0-0-2 - Nanomaterial Risk Assessment   You can consult all of CERN’s safety rules and guidelines here. Please contact the HSE Unit for any questions you may have.   The HSE Unit

25 CFR 700.55 - Decent, safe, and sanitary dwelling.

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Decent, safe, and sanitary dwelling. 700.55 Section 700... PROCEDURES General Policies and Instructions Definitions § 700.55 Decent, safe, and sanitary dwelling. (a) General. The term decent, safe, and sanitary dwelling means a dwelling which— (1) Meets applicable federal...

Transfer pricing and safe harbours

Directory of Open Access Journals (Sweden)

Veronika Solilová

2013-01-01

Full Text Available Transfer prices are significant for both taxpayers and tax administrations because they determine in large part taxable profits of associated enterprises in different tax jurisdictions. Moreover, in the context of taxation, transfer prices must be complied with the arm’s length principle. However, Multinational Enterprises have been faced daily by conflicting rules and approaches to applying the arm’s length principle, burdensome documentation requirements, inconsistent audit standards and unpredictable competent authority outcomes. Therefore, the Committee on Fiscal Affairs launched another project on the administrative aspects of transfer pricing in 2010. On 16 May 2013 as a partial solution of this project was approved by the OECD Council the Revised Section E on Safe Harbours in Chapter IV of the Transfer Pricing Guidelines for Multinational Enterprises and Tax Authorities. The paper is focused on significant changes of newly approved chapter IV of the Transfer Pricing Guidelines for Multinational Enterprises and Tax Authorities, further on analysis of practice in this area, on advantages and disadvantages of safe harbours for taxpayers and competent authorities with aim to suggest recommendations on use of safe harbours in the Czech Republic.

Braking distance algorithm for autonomous cars using road surface recognition

Science.gov (United States)

Kavitha, C.; Ashok, B.; Nanthagopal, K.; Desai, Rohan; Rastogi, Nisha; Shetty, Siddhanth

2017-11-01

India is yet to accept semi/fully - autonomous cars and one of the reasons, was loss of control on bad roads. For a better handling on these roads we require advanced braking and that can be done by adapting electronics into the conventional type of braking. In Recent years, the automation in braking system led us to various benefits like traction control system, anti-lock braking system etc. This research work describes and experiments the method for recognizing road surface profile and calculating braking distance. An ultra-sonic surface recognition sensor, mounted underneath the car will send a high frequency wave on to the road surface, which is received by a receiver with in the sensor, it calculates the time taken for the wave to rebound and thus calculates the distance from the point where sensor is mounted. A displacement graph will be plotted based on the output of the sensor. A relationship can be derived between the displacement plot and roughness index through which the friction coefficient can be derived in Matlab for continuous calculation throughout the distance travelled. Since it is a non-contact type of profiling, it is non-destructive. The friction coefficient values received in real-time is used to calculate optimum braking distance. This system, when installed on normal cars can also be used to create a database of road surfaces, especially in cities, which can be shared with other cars. This will help in navigation as well as making the cars more efficient.

Safely Intake Number of Macridiscus sp. (Kerang Ceplos) from Tambak Lorok Waters, Semarang, Central Java, Indonesia

Science.gov (United States)

Meirenno Tielman, Eduard; Suprijanto, Jusup; Widowati, Ita

2018-02-01

The dynamics pollution that supposed to be derived from industrial activities around Tambak Lorok waters will affect the quality of waters, and also biota such as Macridiscus sp. mussels (Kerang Ceplos) that live and accumulate pollutants such as heavy metals (Pb, Cu, Al, Mn and Fe). However, Macridiscus sp. mussels which have been contaminated by heavy metals is usually sold for consumption by the people and if they consume it in excess, it will be toxic in the people’s body. So that, this study was to analyze Safely Intake Number of Macridiscus sp. from Tambak Lorok waters. This study used AAS (Atomic Absorption Spectrophotometry) method to analyze the accumulation number of the pollutant (Pb, Cu, Al, Mn and Fe). Safely Intake Number calculation is used MWI (Maximal Weekly Intake) and MTI (Maximal Tolerable Intake) calculation method. The results of AAS showed that the highest numbers of pollutant was Al (reached 534,51 mg/kg in the body of Macridiscus sp. that taken in February, 2016) and has exceeded the safely intake number (MWI Al = 1 mg/kg, based on WHO/FAO) so that it’s MTI values was low (0,08 kg/week/person). It means that Macridiscus sp. was not safe to be consumed excessively at that time.

Distance learning: its advantages and disadvantages

OpenAIRE

KEGEYAN SVETLANA ERIHOVNA

2016-01-01

Distance learning has become popular in higher institutions because of its flexibility and availability to learners and teachers at anytime, regardless of geographic location. With so many definitions and phases of distance education, this paper only focuses on the delivery mode of distance education (the use of information technology), background, and its disadvantages and advantages for today’s learners.

Modern Geometric Methods of Distance Determination

Science.gov (United States)

Thévenin, Frédéric; Falanga, Maurizio; Kuo, Cheng Yu; Pietrzyński, Grzegorz; Yamaguchi, Masaki

2017-11-01

Building a 3D picture of the Universe at any distance is one of the major challenges in astronomy, from the nearby Solar System to distant Quasars and galaxies. This goal has forced astronomers to develop techniques to estimate or to measure the distance of point sources on the sky. While most distance estimates used since the beginning of the 20th century are based on our understanding of the physics of objects of the Universe: stars, galaxies, QSOs, the direct measures of distances are based on the geometric methods as developed in ancient Greece: the parallax, which has been applied to stars for the first time in the mid-19th century. In this review, different techniques of geometrical astrometry applied to various stellar and cosmological (Megamaser) objects are presented. They consist in parallax measurements from ground based equipment or from space missions, but also in the study of binary stars or, as we shall see, of binary systems in distant extragalactic sources using radio telescopes. The Gaia mission will be presented in the context of stellar physics and galactic structure, because this key space mission in astronomy will bring a breakthrough in our understanding of stars, galaxies and the Universe in their nature and evolution with time. Measuring the distance to a star is the starting point for an unbiased description of its physics and the estimate of its fundamental parameters like its age. Applying these studies to candles such as the Cepheids will impact our large distance studies and calibration of other candles. The text is constructed as follows: introducing the parallax concept and measurement, we shall present briefly the Gaia satellite which will be the future base catalogue of stellar astronomy in the near future. Cepheids will be discussed just after to demonstrate the state of the art in distance measurements in the Universe with these variable stars, with the objective of 1% of error in distances that could be applied to our closest

Trends and Issues in Distance Education: International Perspectives

Directory of Open Access Journals (Sweden)

Erhan EROGLU

2006-04-01

Full Text Available Trends and Issues in Distance Education: International Perspectives Edited by Yusra Laila Visser, Lya Visser, Michael Simonsın, & Ray Amirault, 2005, United States of America: Information Age Publishing, Inc. pp. 315. ISBN 1-59311-212-2 Reviewed by Dr. Erhan EROGLU Anadolu University Eskisehir, TURKEY In this book, the terms of “distance education” has been discussed from different perspectives. The term “distance education” conjures up in many minds the image of modern, computer-enabled technology that has blossomed in only the last twenty years. Many of the lessons learned over the last century of distance education research and practice have been implemented in a wide variety of distance education programs worldwide, from higher education online learning programs in the United States to rural, radio-based instructional programs in developing countries. Distance education is truly international discipline. While it is true that the term “distance education” has a universal definiton, local distance ducation experiences are often quite idiosyncratic. This idiosyncratic nature emerges from the need to integrate distance education within the constraints, oppurtunities, and realities of spesific cultural and geographic contexts. From these local distance education experiences, educators are developing new understandings of the broader field of distance education, including the trends and issues present in the field. ORGANIZATION OF THE SECTIONS This book has been organized by thematic content into four main sections. Each of these sections represents a unique level of analysis for trends and issues in distance education. Part I presents five distinct perspectives on the state of distance education and the trends and issues of the field. First perspective of five distinct perpectives is “a survey of progressive and conservative trends in education with implications for distance education practice.” Second perspective is �