East coast oil and gas prospects : Sable Island and the Northeast markets

International Nuclear Information System (INIS)

Riga, B.

1997-01-01

An overview of the Canada/United Sable Offshore Energy Project and the Maritimes and Northeast Pipeline project were reviewed. A graphic review of (1) the Scotian shelf gas reserves, (2) the Northeast projected average daily demand for 1995 to 2005, (3) U.S. energy consumption estimates by source, and (4) customer quantities in US markets for 1999 was presented. Maps showing proposed pipeline facilities were included

Contribution à l'étude de la radioactivité gamma du sable des ...

African Journals Online (AJOL)

Les familles de l'Uranium -238, de l'Uranium -235, du Thorium -232 et du Potassium -40 sont d'origines telluriques et contribuent de manière générale aux expositions internes et externes d'un individu. Ce travail a pour objectif de mesurer la radioactivité du sable de deux plages de la baie de Diego-Suarez, à savoir celles ...

Énergie et environnement: l’exploitation des sables bitumineux en Alberta (Canada

Directory of Open Access Journals (Sweden)

Stéphane Héritier

2007-09-01

Full Text Available Découverts dans les années 1930, les secteurs de sables bitumineux (ou pétrolifères de l’Ouest canadien sont caractérisés par une intense exploitation, accélérée et stimulée depuis la décennie 1990, liée à l’explosion de la demande mondiale et aux prix élevés du baril de pétrole. Grâce à cette activité, l’Alberta est devenue l’une des provinces les plus dynamiques du Canada. L’exploitation, concédée à des entreprises pétrolières nationales et internationales, contribue à stimuler à la fois l’économie et la démographie de la province, où les revenus et les conditions économiques générales sont devenus particulièrement attractifs. Dans le même temps l’Alberta et le Canada se trouvent en situation délicate par rapport aux engagements internationaux, l’exploitation et la production du pétrole ayant des effets environnementaux importants tels que l’augmentation de la production de gaz à effets de serre, alors que les économies locales et régionales fondent leurs projets de croissance sur les revenus dégagés par cette exploitation.

Valorisation du sable de concassage et du sable du désert dans la composition des bétons autoplaçants Valorization of the crushed sand and of the desert sand in the composition of the self compacting concrete

Directory of Open Access Journals (Sweden)

R’mili A.

2012-09-01

Full Text Available Les bétons autopla÷ants (BAP sont des bétons très fluides qui demandent des dosages élevés en sables et en éléments fins par rapport au béton ordinaire (BO. Le sable de concassage (SC, à granularité étalée, est un sous-produit de concassage des roches massives. Le sable du désert (SD est un sable extra-fin, caractérisé par une distribution serrée de grosseur des grains. Renfermant des teneurs importantes en fines, ces deux sables peuvent êtres des composants intéressants des BAP. Cette recherché consiste à incorporer le SC dans la composition des bétons et étudier l’effet de son remplacement progressif par le SD sur le comportement à l’état frais et durci des BAP. L’étude expérimentale montre que les paramètres d’ouvrabilité des BAP sont améliorés lorsque le SC est partiellement remplacé par le SD ( 30%, des quantités supplémentaires en eau et en superplastifiant sont nécessaires, pour répondre aux propriétés autopla÷antes. Les résistances mécaniques diminuent en ajoutant le SD au SC, mais elles atteignent des valeurs acceptables pour des dosages modérés en SD. Les performances des BAP sont nettement meilleures que celles des BO confectionnées avec les mêmes granulats. Les essais de spécification de la durabilité montrent que les coefficients d’absorption d’eau par capillarité et par immersion augmentent en ajoutant le SD au SC alors que le coefficient de perméabilité diminue. Self-compacting concretes (SCC are highly fluid concretes that require high proportions in sand and fine particles with respect to the ordinary concrete (OC. The crushed sand (CS, spread granulometry, is a by-product of crushing rock mass. The desert sand (DS is an extra fine sand, characterized by a tight distribution of grain size. Containing significant levels of fine sand, these two sands can be both interesting components of the SCC. This research is to incorporate the CS in the composition of concrete and

An exceptional case of historical outbreeding in African sable antelope populations

DEFF Research Database (Denmark)

Pitra, C.; Hansen, Anders J.; Lieckfeldt, D.

2002-01-01

) sequences analysed from 95 individuals representing 17 sampling locations scattered through the African miombo (Brachystegia) woodland ecosystem] and phylogeographical statistical procedures (gene genealogy, nested cladistic and admixture proportion analyses), we (i) give a detailed dissection...... of the geographical genetic structure of Hippotragus niger; (ii) infer the processes and events potentially involved in the population history; and (iii) trace extensive introgressive hybridization in the species. The present-day sable antelope population shows a tripartite pattern of genetic subdivision representing...... West Tanzanian, Kenya/East Tanzanian and Southern Africa locations. Nested clade analysis revealed that past allopatric fragmentation, caused probably by habitat discontinuities associated with the East African Rift Valley system, together with intermediary episodic long-distance colonization...

Inversion symmetry breaking induced triply degenerate points in orderly arranged PtSeTe family materials

Science.gov (United States)

Xiao, R. C.; Cheung, C. H.; Gong, P. L.; Lu, W. J.; Si, J. G.; Sun, Y. P.

2018-06-01

k paths exactly with symmetry allow to find triply degenerate points (TDPs) in band structures. The paths that host the type-II Dirac points in PtSe2 family materials also have the spatial symmetry. However, due to Kramers degeneracy (the systems have both inversion symmetry and time reversal symmetry), the crossing points in them are Dirac ones. In this work, based on symmetry analysis, first-principles calculations, and method, we predict that PtSe2 family materials should undergo topological transitions if the inversion symmetry is broken, i.e. the Dirac fermions in PtSe2 family materials split into TDPs in PtSeTe family materials (PtSSe, PtSeTe, and PdSeTe) with orderly arranged S/Se (Se/Te). It is different from the case in high-energy physics that breaking inversion symmetry I leads to the splitting of Dirac fermion into Weyl fermions. We also address a possible method to achieve the orderly arranged in PtSeTe family materials in experiments. Our study provides a real example that Dirac points transform into TDPs, and is helpful to investigate the topological transition between Dirac fermions and TDP fermions.

Convective descent simulations of drilling discharges on Georges and Sable Island banks

International Nuclear Information System (INIS)

Andrade, Y.; Loder, J.W.

1997-01-01

Factors affecting the fate of drilling mud discharges on Georges and Sable Island Banks were examined. The Koh and Chang jet discharge model was used to simulate the convective descent of a jet discharge of relatively dense materials at sites representing different hydrographic and depth regimes with a range of mud densities, and different discharge configurations, ocean currents and seasonal stratifications. The study revealed the dependence of the depth of descent and properties of the discharge plume on the discharge configuration and oceanographic conditions. The factors that affected the depth of descent were mud density, depth of release, initial downward volume flux of the discharge, current strength and ocean stratification. 22 refs., 3 tabs., 59 figs

MODULATION DE L’INSULINO-SECRETION PAR LES CYTOKINES CHEZ LE RAT DES SABLES ET LE RAT WISTAR: ETUDE INTERSPECIFIQUE

Directory of Open Access Journals (Sweden)

A HADDAR

2001-12-01

Dans cette étude, nous avons comparé l’activité insulinosécrétoire des îlots de Langerhans isolés du rat Wistar et du rat des sables, afin de déterminer les variation interspécifiques. Nos résultats préliminaires indiquent que l'effet le plus probant est observé en présence de l’IL-1b. En effet, cette cytokine stimule la sécrétion d’insuline de manière dose-dépendante également chez le rat des sables; toutefois, l'amplitude de la réponse est plus prononcée chez le rongeur désertique, avec une augmentation du taux de l’insuline libérée de l’ordre de 147%, en présence d’une concentration de 20 UI/ml de l’IL-1b, comparée à la sécrétion basale. Quant à l’IL-2, nous n’avons enregistré aucune modification dans l’activité insulinosécrétoire des 2 espèces.

Nearshore and offshore environmental effects monitoring at the Sable Offshore Energy project

International Nuclear Information System (INIS)

Hurley, G. V.

2000-01-01

A monitoring program to determine whether any temporary or permanent environmental perturbations may be attributable to the Sable offshore gas pipeline project as it approaches landfall at Goldboro through an outer bay is discussed, This nearshore region is an active fishing region for the residents of Goldboro, hence the concern about possible contamination. The monitoring project began with a baseline study, followed by monitoring the construction and the recovery period following construction, to ensure that any persistent changes to the nearshore aquatic environment were documented. The monitoring study included representatives of the fishing community to ensure that concerns are addressed early and on a continuing basis. At various phases of the project water properties,sediment modelling, the effects of construction on sea bottom conditions, benthic biota and cultivated mussels, water quality, phytoplankton, and resuspension of toxic cysts, terns and other seabirds were studied. Monitoring programs were also established for sea urchins and mussels, two important commercial species. Commercial-sized sea urchins showed a decrease of 60 per cent between 1998 and 1999 (i.e. the construction period). Recovery of sea urchin population in the immediate trench region will be the special focus of the post-construction monitoring phase. Mussel spat settlement and mussel tissue condition, lobster trapping, water properties, and bird behaviour showed no measurable changes during construction monitoring. In addition to these studies there is an ongoing offshore monitoring program in effect by Sable Offshore Energy Inc., put in place as a condition of approval of its Development Plan by the Canada-Nova Scotia Offshore Petroleum Board. This program monitors attributes such as water quality, suspended particulate matter in the benthic boundary layer, sediment quality, the benthic habitat and megafaunal community, shellfish body burden and taint, marine mammals and seabirds

Superconductor (Nb)-charge density wave (NbSe sub 3) point-contact spectroscopy

CERN Document Server

Sinchenko, A A

2003-01-01

Measurements of differential current-voltage (I-V) characteristics of point contacts between Nb and the charge density wave (CDW) conductor NbSe sub 3 formed along the conducting chain direction are reported. Below the superconducting transition of Nb, we have clearly observed Andreev reflection of the gapless electrons of NbSe sub 3. Analysis of the spectra obtained indicates that when the energy of injected particles exceeds the superconducting energy gap, the superconductivity near the S-CDW interface is suppressed because of non-equilibrium effects.

Double Dirac Point Semimetal in Two-Dimensional Material: Ta2Se3

OpenAIRE

Ma, Yandong; Jing, Yu; Heine, Thomas

2017-01-01

Here, we report by first-principles calculations one new stable 2D Dirac material, Ta2Se3 monolayer. For this system, stable layered bulk phase exists, and exfoliation should be possible. Ta2Se3 monolayer is demonstrated to support two Dirac points close to the Fermi level, achieving the exotic 2D double Dirac semimetal. And like 2D single Dirac and 2D node-line semimetals, spin-orbit coupling could introduce an insulating state in this new class of 2D Dirac semimetals. Moreover, the Dirac fe...

Pb induces superconductivity in Bi2Se3 analyzed by point contact spectroscopy

OpenAIRE

Arevalo-López, P.; López-Romero, R. E.; Escudero, R.

2015-01-01

Some topological insulators become superconducting when doped with Cu and Pd. Superconductivity in a non-superconductor may be induced by proximity effect: i.e. Contacting a non-superconductor with a superconductor. The superconducting macroscopic wave function will induce electronic pairing into the normal compound. In the simplest topological insulator, Bi$_2$Se$_3$, superconductivity may be induced with Pb. We studied with point contact junctions formed by contacting Bi$_2$Se$_3$ crystals ...

Double Dirac point semimetal in 2D material: Ta2Se3

Science.gov (United States)

Ma, Yandong; Jing, Yu; Heine, Thomas

2017-06-01

Here, we report by first-principles calculations one new stable 2D Dirac material, Ta2Se3 monolayer. For this system, stable layered bulk phase exists, and exfoliation should be possible. Ta2Se3 monolayer is demonstrated to support two Dirac points close to the Fermi level, achieving the exotic 2D double Dirac semimetal. And like 2D single Dirac and 2D node-line semimetals, spin-orbit coupling could introduce an insulating state in this new class of 2D Dirac semimetals. Moreover, the Dirac feature in this system is layer-dependent and a metal-to-insulator transition is identified in Ta2Se3 when reducing the layer-thickness from bilayer to monolayer. These findings are of fundamental interests and of great importance for nanoscale device applications.

Tracking bird migration at the Baie-des-Sables wind farm site : Innergex II Inc.; Suivi des migrations des oiseaux sur le site d'implantation d'un parc eolien a Baie-des-Sables : Innergex II Inc.

Energy Technology Data Exchange (ETDEWEB)

Castonguay, M.; Beauchesne, J.A.; Ouellet, J.F.; Pelletier, N.; Gallant, F.; Lavoie, J. [Pesca Environnement, Maria, PQ (Canada)

2004-12-21

The global production of electricity from wind power has increased significantly in recent years. As part of Hydro-Quebec's plans to increase wind power production, Cartier Wind Power plans to install 61 wind turbines at Baie-des-Sables on Quebec's Gaspe Peninsula where wind energy is abundant. This study evaluated the impact of the proposed wind turbine array on birds and their habitat and migration patterns. In particular, it characterized the migratory passage of birds in the area through 900 hours of visual and auditory observation beginning with spring migration, spring nesting to autumnal migration. The behavior of different migratory birds as well as local species was studied and the results of the ornithological inventory were revealed in terms of species abundance and diversity; distribution and use of the territory by birds; migratory activities; period and importance of migration; characterization of displacement; height of flight; direction of migration; and, use of the territory by the avifauna. The inventory identified 121 species of birds including 14 species of raptors which moved mainly along the river and flew very high. The study revealed that although the bird habitats at Baie-des-Sables were already strongly disturbed by agricultural activities, it is unlikely that the turbines will not have any impact on the avifauna. However, most of the wind turbines will be installed in farmers fields, and as such, will not exert additional pressure on the forest medium. The factors that influence the rate of bird collisions with wind turbines were discussed. In order to lessen the impact on birds, it was suggested that installation work should occur outside of the nesting season and that the electrical supply networks should be hidden to limit the harmful effects posed by power lines. 16 refs., 9 tabs., 4 figs., 11 maps, 9 appendices.

Follow-up on the migration of birds of prey at the Baie-des-Sables wind park site : preliminary report; Suivi de la migration des oiseaux de proie sur le site d'implantation du parc eolien de Baie-des-Sables : rapport preliminaire

Energy Technology Data Exchange (ETDEWEB)

Castonguay, M.; Beauchesne, J.A.; Boulianne, F.; Bujold, J.; Ouellet, J.F. [Pesca Environnement, Maria, PQ (Canada)

2005-06-15

Cartier Wind Power plans to install a wind turbine array at Baie-des-Sables in the Gaspe Peninsula. This study evaluated the impact of the proposed wind turbine array on the thousands of birds of prey that fly along Quebec's St. Lawrence River each year. Their migration patterns were evaluated through visual and auditory observations during the springtime reproductive and nesting season. The proposed 109.5 MW wind turbine park in Baie-des-Sables was presented to the Quebec Ministry of Sustainable Development, Environment and Parks. In order to complete a feasibility study for this project, it was necessary to document and characterize the spring migration pattern of birds of prey in the area. An inventory of raptors was carried out between March 31 and May 23, 2005. This current study supplemented an existing inventory from a previous study carried out in the spring of 2004. This current study included data on dates of observations of the migratory birds during the monitoring period. Nine species of birds of prey were identified. Overall, 448 individual birds were observed over a total period of 92 hours. With 137 sightings of the red-tailed hawk and 95 sightings of the rough-legged hawk, these 2 species were the most frequently indexed species, accounting for 51.8 per cent of the sightings. No evidence of nesting particular to birds of prey was observed at the site. The flight patterns of the birds were also observed with reference to height and direction of flight. 7 refs., 4 tabs., 1 fig., 3 appendices.

Pathology and immunohistochemistry of papillomavirus-associated cutaneous lesions in Cape mountain zebra, giraffe, sable antelope and African buffalo in South Africa

Directory of Open Access Journals (Sweden)

J. H. Williams

2011-04-01

Full Text Available Skin lesions associated with papillomaviruses have been reported in many animal species and man. Bovine papillomavirus (BVP affects mainly the epidermis, but also the dermis in several species including bovine, the best-known example being equine sarcoid, which is associated with BVP types 1 and 2. This publication describes and illustrates the macroscopic and histological appearance of BPV-associated papillomatous, fibropapillomatous or sarcoid-like lesions in Cape mountain zebra (Equus zebra zebra from the Gariep Dam Nature Reserve, 2 giraffes (Giraffa camelopardalis from the Kruger National Park, and a sable antelope (Hippotragus niger from the Kimberley area of South Africa. An African buffalo (Syncerus caffer cow from Kruger National Park also had papillomatous lesions but molecular characterisation of lesional virus was not done. Immunohistochemical staining using polyclonal rabbit antiserum to chemically disrupted BPV-1, which cross-reacts with the L1 capsid of most known papillomaviruses, was positive in cells of the stratum granulosum of lesions in Giraffe 1, the sable and the buffalo and negative in those of the zebra and Giraffe 2. Fibropapillomatous and sarcoid-like lesions from an adult bovine were used as positive control for the immunohistochemistry and are described and the immunohistochemistry illustrated for comparison. Macroscopically, both adult female giraffe had severely thickened multifocal to coalescing nodular and occasionally ulcerated lesions of the head, neck and trunk with local poorly-circumscribed invasion into the subcutis. Necropsy performed on the 2nd giraffe revealed neither internal metastases nor serious underlying disease. Giraffe 1 had scattered, and Giraffe 2 numerous, large, anaplastic, at times indistinctly multinucleated dermal fibroblasts with bizarre nuclei within the sarcoid-like lesions, which were BPV-1 positive in Giraffe 1 and BPV-1 and -2 positive in Giraffe 2 by RT-PCR. The sable antelope

Carácter existencial de la fe: estudio de la obra dramática de Le Palais de Sable de Gabriel Marcel

OpenAIRE

Cantero Tovar, Esther

2015-01-01

Empezamos mostrando el papel primordial del teatro en la filosofía de Gabriel Marcel. La necesidad que tiene su pensamiento de partir de situaciones concretas le lleva a convertirse en un autor dramático. En segundo lugar y partiendo de la trama de la obra Le palais de sable y de la evolución de sus personajes, analizaremos las implicaciones destructivas que provoca una falsa fe basada en una cierta concepción idealista de ella. Por último situaremos nuestra mirada ...

Isotopic reconstruction of ancient human migrations: A comprehensive Sr isotope reference database for France and the first case study at Tumulus de Sables, south-western France

Science.gov (United States)

Willmes, M.; Boel, C.; Grün, R.; Armstrong, R.; Chancerel, A.; Maureille, B.; Courtaud, P.

2012-04-01

Strontium isotope ratios (87Sr/86Sr) can be used for the reconstruction of human and animal migrations across geologically different terrains. Sr isotope ratios in rocks are a product of age and composition and thus vary between geologic units. From the eroding environment Sr is transported into the soils, plants and rivers of a region. Humans and animals incorporate Sr from their diet into their bones and teeth, where it substitutes for calcium. Tooth enamel contains Sr isotope signatures acquired during childhood and is most resistant to weathering and overprinting, while the dentine is often diagenetically altered towards the local Sr signature. For the reconstruction of human and animal migrations the tooth enamel 87Sr/86Sr ratio is compared to the Sr isotope signature in the vicinity of the burial site and the surrounding area. This study focuses on the establishment of a comprehensive reference map of bioavailable 87Sr/86Sr ratios for France. In a next step we will compare human and animal teeth from key archaeological sites to this reference map to investigate mobility. So far, we have analysed plant and soil samples from ~200 locations across France including the Aquitaine basin, the western and northern parts of the Paris basin, as well as three transects through the Pyrenees Mountains. The isotope data, geologic background information (BRGM 1:1M), field images, and detailed method descriptions are available through our online database iRhum (http://rses.anu.edu.au/research/ee). This database can also be used in forensic studies and food sciences. As an archaeological case study teeth from 16 adult and 8 juvenile individuals were investigated from an early Bell Beaker (2500-2000 BC) site at Le Tumulus des Sables, south-west France (Gironde). The teeth were analysed for Sr isotope ratios using laser ablation ICP-MS. Four teeth were also analysed using solution ICP-MS, which showed a significant offset to the laser ablation results. This requires further

$\\beta$- decay of the N=Z, rp-process waiting points: $^{64}$Ge, $^{68}$Se and the N=Z+2: $^{66}$Ge, $^{70}$Se for accurate stellar weak-decay rates

CERN Multimedia

The contribution of electron capture to weak-decay rates has been neglected in model calculations of Type I X-ray bursts so far. Nucleosynthesis in these astrophysical events eventually proceeds through the rp-process near the proton drip-line. In particular, several N=Z nuclei such as $^{64}$Ge and $^{68}$Se act as waiting points in the nuclear flow due to the low S${_P}$ values of their Z+1 neighbours. Recent theoretical calculations have shown that, in these high density ($\\thicksim10^{6}$ g/cm$^3$) and high temperature (1 - 2 GK) scenarios, continuum electron capture rates might play an important role, in particular for species at and around these waiting point nuclei. This proposal is aimed at the study of the $\\beta^{+}$/EC-decay of the waiting point nuclei $^{64}$Ge, $^{68}$Se and their N=Z+2 second neighbours $^{66}$Ge and $^{70}$Se with the Total Absorption Spectroscopy method. This will allow for a detailed analysis of their contribution to the EC-decay rates in X-Ray burst explosions. The proposed ...

Seasonal and interannual variability in grey seal diets on Sable Island, eastern Scotian Shelf

Directory of Open Access Journals (Sweden)

W D Bowen

2007-01-01

Full Text Available We studied seasonal and interannual variability in the diet of grey seals (Halichoerus grypus using faecal samples collected from Sable Island, Nova Scotia between 1991 and 1998. More than 28,000 prey from at least 28 taxa were identified from 1,245 faecal samples collect mainly in spring, fall and winter. Sand lance (Ammodytes dubius dominated the diet in all seasons and years, but the importance of this and other species varied over time. There was also evidence of seasonal and interannual variation in the size of prey consumed both within and among species. We compared diet composition with estimates of prey numbers and biomass from annual researchtrawl surveys conducted in March and July. Species-specific numerical corrections were applied to otolith counts to account for the complete digestion of otoliths, and fish catchability correction factors applied to trawl survey catches to account for trawl selectivity. Based on an odds ratio index of prey selectivity, grey seals positively selected sand lance in both seasons. Other species were either relatively avoided or eaten roughly in proportion to their estimated abundance.

Sable Offshore Energy Inc.: Response to 'The Canada-Nova Scotia Offshore Petroleum Board Benefits Plan Decision Report' Condition No. 3: Employment and Training Plan; Condition No. 4: Research and Development Plan; Condition No. 6: Disadvantaged Individual or Groups; Condition No. 7: Technology Transfer

International Nuclear Information System (INIS)

1998-01-01

Decisions of the Canada-Nova Scotia Offshore Petroleum Board, regarding the responses of Sable Offshore Energy Inc (SOEI) to conditions imposed by the Board in the Sable Offshore Energy Project Canada-Nova Scotia Benefit Plan Decision Report, have been announced. According to the press release (copy attached), the Board accepted the responses of SOEI regarding the establishment and staffing of an office in Nova Scotia for the implementation and project management and training of project personnel, the level of expenditures for research and development to be undertaken in Nova Scotia, proposed initiatives for employment and training opportunities for disadvantaged individuals and groups, and a technology transfer plan that will facilitate succession planning and create joint venturing opportunities for Nova Scotian and Canadian industry. tabs., figs

ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

African Journals Online (AJOL)

SEI Joseph

anastomosés. La caractérisation pétro-sédimentologique révèle la présence de certains minéraux tels que : quartz, hématite, biotite, sillimanite, scheelite, goethite, limonite, manganèse, pyroxène et tourmaline. Les grès auraient un ciment hémato-manganeux. Aussi, les sables sont moyennement classés. Ces sables ont.

Nematic quantum critical point without magnetism in FeSe1-xSx superconductors.

Science.gov (United States)

Hosoi, Suguru; Matsuura, Kohei; Ishida, Kousuke; Wang, Hao; Mizukami, Yuta; Watashige, Tatsuya; Kasahara, Shigeru; Matsuda, Yuji; Shibauchi, Takasada

2016-07-19

In most unconventional superconductors, the importance of antiferromagnetic fluctuations is widely acknowledged. In addition, cuprate and iron-pnictide high-temperature superconductors often exhibit unidirectional (nematic) electronic correlations, including stripe and orbital orders, whose fluctuations may also play a key role for electron pairing. In these materials, however, such nematic correlations are intertwined with antiferromagnetic or charge orders, preventing the identification of the essential role of nematic fluctuations. This calls for new materials having only nematicity without competing or coexisting orders. Here we report systematic elastoresistance measurements in FeSe1-xSx superconductors, which, unlike other iron-based families, exhibit an electronic nematic order without accompanying antiferromagnetic order. We find that the nematic transition temperature decreases with sulfur content x; whereas, the nematic fluctuations are strongly enhanced. Near [Formula: see text], the nematic susceptibility diverges toward absolute zero, revealing a nematic quantum critical point. The obtained phase diagram for the nematic and superconducting states highlights FeSe1-xSx as a unique nonmagnetic system suitable for studying the impact of nematicity on superconductivity.

Nuclear binding around the RP-process waiting points $^{68}$Se and $^{72}$Kr

CERN Multimedia

2002-01-01

Encouraged by the success of mass determinations of nuclei close to the Z=N line performed at ISOLTRAP during the year 2000 and of the recent decay spectroscopy studies on neutron-deficient Kr isotopes (IS351 collaboration), we aim to measure masses and proton separation energies of the bottleneck nuclei defining the flow of the astrophysical rp-process beyond A$\\sim$70. In detail, the program includes mass measurements of the rp-process waiting point nuclei $^{68}$Se and $^{72}$Kr and determination of proton separation energies of the proton-unbound $^{69}$Br and $^{73}$Rb via $\\beta$-decays of $^{69}$Kr and $^{73}$Sr, respectively. The aim of the project is to complete the experimental database for astrophysical network calculations and for the liquid-drop type of mass models typically used in the modelling of the astrophysical rp process in the region. The first beamtime is scheduled for the August 2001 and the aim is to measure the absolute mass of the waiting-point nucleus $^{72}$Kr.

Eastern Canada natural gas developments

International Nuclear Information System (INIS)

Wall, A.

2001-01-01

This power point presentation addressed the following topics regarding development of natural gas in eastern Canada: (1) the 18 Tcf of proven natural gas reserves at Sable Island, (2) Canadian markets benefiting from the Maritimes and Northeast Pipeline (M and NP), (3) a 20 year franchise agreement between Enbridge Gas and the government of New Brunswick, (4) the 25 year provincial franchise agreement by Sempra Atlantic Gas, and (5) Sable Island's influence on central Canada. The Sable Offshore Energy Project (SOEP) is now producing about 540,000 MMBtu/day from 6 fields. Plans for Tier 2 expansion are underway. Firm contracts for the M and NP are scheduled to transport gas from the SOEP to markets in Nova Scotia, New Brunswick, Maine and New Hampshire. Sable gas is also a potential supply for the Quebec market. Gaz Metropolitain and Enbridge have proposed to build the Cartier Pipeline from the Quebec/New Brunswick border to Quebec City. It is unlikely that Sable Island supply will directly serve the Ontario market. Canadian customers for Sable gas and M and NP service include pulp and paper companies, oil refineries, power generators and local distribution companies (LDC), with the majority of demand coming form the electric power industry. tabs., figs

Study of a radiation point defects ensemble in thin GaAs layers implanted by Be+ and Se+ ions

International Nuclear Information System (INIS)

Shcherbachev, K.D.; Bublik, V.T.; Kuripyatnik, A.V.; Yurchuk, S.Yu.

2001-01-01

The behaviour of a radiation point defects ensemble in SI-GaAs(100) wafers implanted by Be + (a dose of 1x10 14 at/cm 2 , an energy of 50 and 150 keV) and Se + (a dose of 5x10 14 at/cm 2 , an energy of 150, 180 and 240 keV) ions are studied by a triple-crystal diffractometry method. The strain profile and a number of residual radiation point defects are shown to be determined by defects annihilation, their sink to the surface and rechanneling during the implantation [ru

Measurement of 76Se and 78Se (γ, n) cross sections

International Nuclear Information System (INIS)

Kitatani, Fumito; Harada, Hideo; Goko, Shinji; Utsunomiya, Hiroaki; Akimune, Hidetoshi; Toyokawa, Hiroyuki; Yamada, Kawakatsu

2011-01-01

The (γ, n) cross sections of Se isotopes ( 76 Se, 78 Se) were measured to supply fundamental data for estimating the inverse reaction cross section, i.e., the 79 Se(n, γ) 80 Se cross section. The enriched samples and a reference 197 Au sample were irradiated with laser-Compton scattering (LCS) γ-rays. The excitation function of each (γ, n) cross section was determined for the energy range from each near neutron separation energy to the threshold energy of (γ, 2n) reaction. The energy point corresponding to each cross section was deduced using the accurately determined energy distribution of LCS γ-rays. Systematic (γ, n) cross sections for Se isotopes including 80 Se were compared with those calculated by using a statistical model calculation code TALYS. (author)

Evaluation of As, Se and Zn in octopus samples in different points of sales of the distribution chain in Brazil

International Nuclear Information System (INIS)

Marildes Josefina Lemos Neto; Elizabeth de Souza Nascimento; Mariza Landgraf; Vera Akiko Maihara; Silva, P.S.C.

2014-01-01

Shellfish such as squid and octopus, class Cephalopoda, has high commercial value in restaurants and for export. As, Se and Zn concentrations were determined in 117 octopus acquired in different points of the distribution chain in 4 coastal cities of Sao Paulo state (Guaruja, Santos, Sao Vicente and Praia Grande)-Brazil. The methodology for elemental determination was Instrumental Neutron Activation Analysis (INAA). The element concentration in the octopus samples (wet weight) range from: 0.184 to 35.4 mg kg -1 for As, 0.203 to 2.26 mg kg -1 for Se and 4.73 to 37.4 mg kg -1 for Zn. Arsenic and Se levels were above the limit for fish established by Brazilian legislation, while Zn concentrations were in accordance with literature values. (author)

Ab initio study of point defects in PbSe and PbTe: Bulk and nanowire

Energy Technology Data Exchange (ETDEWEB)

Wrasse, E. O. [Instituto de Física, Universidade Federal de Uberlândia, 38408-100, Uberlândia, MG, Brazil and Departamento de Física, Universidade Federal de Santa Maria, 97105-900, Santa Maria, RS (Brazil); Venezuela, P. [Instituto de Física, Universidade Federal Fluminense, 24210-346, Niteroi, RJ (Brazil); Baierle, R. J., E-mail: rbaierle@smail.ufsm.br [Departamento de Física, Universidade Federal de Santa Maria, 97105-900, Santa Maria, RS (Brazil)

2014-11-14

First principles investigations, within the spin-polarized density functional theory, are performed to study energetic stability and electronic properties of point defects (vacancies and antisites) in PbSe and PbTe: bulk and nanowire (NW). Our results show that the energetic stability of these defects is ruled by relaxation process. These defects have lower formation energies in the nanowire structures as compared to the bulk, being more stable in the surface of the NWs. We also show that in the bulk system only one charge state is stable, otherwise, due to the larger band gaps, more than one charge state may be stable in the NWs. In addition, we have investigated how the presence of intrinsic defects affects the electronic properties of bulk and NW systems. Vacancies give rise to new electronic states near to the edges of the valence and conduction bands while the energetic position of the electronic states from antisites depends on the charge state, being localized inside the band gap or near the edges of the valence or conduction bands. We discuss how these changes in the electronic properties due to intrinsic defects may affect the thermoelectric properties of PbSe and PbTe NWs.

Thermoelectric study of Ag doped SnSe-Sb2Se3 based alloy

Science.gov (United States)

Das, Anish; Talukdar, M.; Kumar, Aparabal; Sarkar, Kalyan Jyoti; Dhama, P.; Banerji, P.

2018-05-01

In this article we have synthesized p-type alloy of SnSe and Sb2Se3 (10 atomic %) to study the thermoelectric transport properties. The alloy was prepared by melt grown technique followed by spark plasma sintering and latter doped with 2 atomic % Ag to compensate the carrier density in order to achieve higher electrical conductivity (σ). Out of these, the doped sample resulted in the maximum figure of merit, ZT˜0.7 at 773 K due to the existence of the secondary phase AgSbSe2 and reduced lattice thermal conductivity (0.61 W m-1 K-1 at 300 K). The fitted lattice thermal conductivity shows that point defect and Umklapp scattering are the primary process of phonon scattering for all the samples whereas the fitted mobility data confirms acoustic phonon scattering along with point defect and grain boundary scattering to be the main carrier scattering mechanism. More over room temperature carrier density and electrical conductivity are found to increase for the doped sample which further corroborate (90%)SnSe-(10%)Sb2Se3:2%Ag to be a potential candidate for highly efficient thermoelectric materials.

The current market picture

International Nuclear Information System (INIS)

Zwick, G.

2001-01-01

The speaker discussed the situation of gas supply and demand in the eastern part of North America. The first PowerPoint slide provided the outline of the presentation. The author showed maps detailing the regional gas demand, first in Ontario, Quebec and the Maritimes, then New England. The next few slides depicted the North American power generation capacity, and the market fundamentals of supply. The Canadian East Coast Forecast Production was shown, and the impact of liquid natural gas (LNG) and Sable deliveries through 2010 explained. The key themes for the next ten years were explored and the situation of Sable gas to Quebec as of 23 May 2001 was described. The implications for the Quebec market are many: Quebec is now receiving Sable gas and its connection with the Portland market is proving very useful. It all leads to growing confidence on the part of industrial gas users. The author concluded the presentation with a few thoughts: (1) moderate demand growth in Central Canada, (2) stronger growth in New England, (3) power generation is a key driver of demand, (4) LNG, East Coast and Arctic gas will be key supply sources, and (5) Sable gas to Quebec. figs

Methodology of intervention during a mystery spill: The example of the Baie-des-Sables case

International Nuclear Information System (INIS)

Martin, V.

1993-01-01

A mystery spill, or an oil spill of unknown origin, is one whose source cannot be identified at the time the environmental impact of the spill is noted. Unlike a known incident during which preventive action may be taken, mystery spills are often assessed based on the damages they have caused. In Canada, the coast guard regularly reports many spills with unidentified sources, and the most frequently reported sign of a spill is the presence of an oily film on the water surface. The smell of oil is also an important indication of a recent spill. The spill at Baie-des-Sables, Quebec, is presented as an illustrative example of a mystery spill. The size of the spill was estimated at 25 tons of bunker oil. The first indication of the spill was a number of contaminated ducks from the Rimouski region, reported by hunters to the appropriate government agency. Two days later, an oil slick was reported in the channel between Baie-Comeau and Rimouski; this provided sufficient information to trigger an alert. The next day an aerial inspection of the slick was carried out and a dispersion model was made. Contamination of seagulls and the south shore of the St. Lawrence River were noted. Over the next week response measures were organized and more inspections of shorelines were undertaken. Of the shoreline studied, 50 km were contaminated and 14 km were restored. Lack of precise early observations of the slick precluded identification of the vessel responsible for the spill. Recommendations are made for improving assessment of mystery spills and ensuring faster response times. 1 fig

Research Update: Point defects in CdTexSe1−x crystals grown from a Te-rich solution for applications in detecting radiation

International Nuclear Information System (INIS)

Gul, R.; Roy, U. N.; Bolotnikov, A. E.; Camarda, G. S.; Cui, Y.; Hossain, A.; Yang, G.; James, R. B.; Lee, W.; Cui, Y.; Burger, A.

2015-01-01

We investigated cadmium telluride selenide (CdTeSe) crystals, newly grown by the Traveling Heater Method (THM), for the presence and abundance of point defects. Current Deep Level Transient spectroscopy (I-DLTS) was used to determine the energies of the traps, their capture cross sections, and densities. The bias across the detectors was varied from 1 to 30 V. Four types of point defects were identified, ranging from 10 meV to 0.35 eV. Two dominant traps at energies of 0.18 eV and 0.14 eV were studied in depth. Cd vacancies are found at lower concentrations than other point defects present in the material

Using Cape Sable seaside sparrow distribution data for water management decision support

Science.gov (United States)

Beerens, James M.; Romañach, Stephanie

2016-01-01

The Cape Sable Seaside Sparrow (Ammodramus maritimus mirabilis; hereafter sparrow) is endemic to south Florida and a key indicator species of marl prairie, the most diverse freshwater community in the Florida Everglades. Marl prairie habitat is shaped by intermediate levels of disturbances such as flooding, drying, and fire, which maintain periphyton production (Gaiser et al. 2011), vegetation composition (Sah et al. 2011), and habitat structure for wildlife (Lockwood et al. 2003). Historically, patches of marl prairie shifted in response to changing climatic conditions,; however, habitat loss and hydrologic alteration have restricted the sparrow’s range and increased their sensitivity to changing hydropatterns. As a result, sparrow numbers have declined as much as 60% range-wide since 1992 (Curnutt et al. 1998, Nott et al. 1998). Currently, the sparrow is restricted to the freshwater prairies of the Everglades National Park (ENP) and Big Cypress Preserve (Lockwood et al. 1997). Because this non-migratory bird is restricted in its range it was among the first species to be listed as endangered by the US Fish and Wildlife Service on March 11, 1967 (Pimm et al. 2000). Now protected by the Endangered Species Act of 1973, the sparrow is listed as an endangered species, and the marl prairies that it resides in are listed as critical habitat. Since its designation as an endangered species, federal agencies have a statutory obligation to not jeopardize the survival of the species or modify its critical habitat. However, there are still uncertainties in how to increase suitable habitat within and surrounding the six existing sparrow subpopulations (Fig. 1) which are vulnerable to environmental stochasticity because of their small population size and restricted range. Since Because maintenance and creation of suitable habitat is seen as the most important pathway to the persistence of sparrow subpopulations (Sustainable Ecosystems Institute 2007), emphasis should be on

54 La Terrasse Ebebda (centre du Cameroun) : preuve d'une ...

African Journals Online (AJOL)

PR BOKO

Mais nous relevons la présence de certains minéraux lourds dans le Mbam ce sont des minéraux tels que l'augite, l'olivine qui sont d'origine volcanique et se retrouvent également sur la terrasse. Pourtant ces minéraux ne se voient pas dans les sables de la sanaga. Dans le Mbam la fréquence de l'augite est de 5% alors ...

Properties of different temperature annealed Cu(In,Ga)Se{sub 2} and Cu(In,Ga){sub 2}Se{sub 3.5} films prepared by RF sputtering

Energy Technology Data Exchange (ETDEWEB)

Yu Zhou; Liu Lian; Yan Yong; Zhang Yanxia; Li Shasha; Yan Chuanpeng; Zhang Yong [Key Laboratory of Magnetic Suspension Technology and Maglev Vehicle, Ministry of Education of China, Superconductivity and New Energy R and D Center (SNERDC), Mail Stop 165, Southwest Jiaotong University, Chengdu 610031 (China); Zhao Yong, E-mail: yzhao@swjtu.edu.cn [Key Laboratory of Magnetic Suspension Technology and Maglev Vehicle, Ministry of Education of China, Superconductivity and New Energy R and D Center (SNERDC), Mail Stop 165, Southwest Jiaotong University, Chengdu 610031 (China); School of Materials Science and Engineering, University of New South Wales, Sydney 2052, NSW (Australia)

2012-11-15

Highlights: Black-Right-Pointing-Pointer The Cu(In,Ga)Se{sub 2} and Cu(In,Ga)2Se{sub 3.5} films follow different process to form CIGS phase. Black-Right-Pointing-Pointer Composition loss of the annealed Cu(In,Ga)Se{sub 2} and Cu(In,Ga){sub 2}Se{sub 3.5} films are different. Black-Right-Pointing-Pointer Hexagonal CuSe phase exhibits unique transport feature. Black-Right-Pointing-Pointer Conductivity of the CIGS films is affected by the 'variable range hopping' mechanism. - Abstract: We have investigated the effect of annealing temperature on structural, compositional, electrical properties of the one-step RF sputtered Cu(In,Ga)Se{sub 2} and Cu(In,Ga){sub 2}Se{sub 3.5} films. After the annealing at various temperatures, loss of Se element is significant for the Cu(In,Ga)Se{sub 2} films and meanwhile composition of the annealed Cu(In,Ga){sub 2}Se{sub 3.5} films keeps almost constant. The as-deposited Cu(In,Ga)Se{sub 2} and Cu(In,Ga){sub 2}Se{sub 3.5} films show amorphous structure and they follow different transformation process to form chalcopyrite structure. Electrical conductivity of the annealed CIGS films related to their chemical composition. Cu(In,Ga)Se{sub 2} films annealed at 150 Degree-Sign C show unique electron transport mechanism for the formation of hexagonal CuSe phase. Electrical conductivity of the chalcopyrite structure films are dominated by the 'variable range hopping' transport mechanism. The annealed Cu(In,Ga){sub 2}Se{sub 3.5} films present higher density of disorders than the annealed Cu(In,Ga)Se{sub 2} films for their significant Cu deficient composition.

Preparation for and physiological responses to competing in the Marathon des Sables: a case report.

Science.gov (United States)

Williams, N; Wickes, S J; Gilmour, K; Barker, N; Scott, J P R

2014-02-01

A case study into the preparation and physiological responses of competing in the Marathon des Sables (MDS) was conducted by preparing a male competitor for, and monitoring him during, his first attempt at the race. The aims of this case report were to (a) prepare and monitor an ex-Olympic, male rower (S1) during the 2010 race and; (b) compare his physiological responses and race performance to that of the current MDS record holder (S2). S1 (age 37 y; body mass 94.0 kg; height 1.92 m; VO(2peak) 66.0 ml·kg⁻¹·min⁻¹) and S2 (age 37 y; body mass 60.8 kg; height 1.68 m; VO(2peak) 65.9 ml·kg⁻¹·min⁻¹) completed a heat test and S1 subsequently underwent 7 d of heat acclimation prior to the MDS. Gastro-intestinal temperature (Tgi) and heart rate (HR) were measured for S1 during Stages 2, 4, and 5 of the MDS and pre- and post-stage body mass, and urine specific gravity were measured for all stages. Race time and average speeds were collected for S1 and S2. Total race times for S1 and S2 were 25:29:35 and 19:45:08 h:min:s. S1's mean (± 1 SD) percentage HR range (%HRR=[HR-HRmin]/[HRmax-HRmin]x100) was 66.1 ± 13.4% and Tgi ranged between 36.63-39.65°C. The results provide a case report on the physiological responses of a highly aerobically-trained, but novice ultra-endurance runner competing in the MDS, and allow for a comparison with an elite performer.

La physique des tas de sable Description phénoménologique de la propagation des contraintes dans les matériaux granulaires

Science.gov (United States)

Claudin, Ph.

This work deals with the stress distribution in dry granular media such as sand. As a matter of fact, the granular family is amazingly wide: raw materials used in building, chemical or food industries are made of little grains. Predicting how forces propagate and fluctuate into granular media is then a real and concrete challenge. This goal is not easy to reach. One reason is that the stress distribution is strongly inhomogeneous: the forces applied on a granular system will be supported almost entirely by a fraction of the grains which form chains, or arches. As a consequence, the stress profile beneath a sandpile depends on the way that the pile was built. In order to describe quantitatively these effects, we proposed a phenomenological friction relation between arches. The differential equations which come out from this modelling are of hyperbolic type, which means that there exists particular lines for propagation called characteristics. We managed to match these characteristics with arches. These models fit well with experimental data, and can explain for example the dip of pressure observed beneath the apex of a pile made with a hopper. They also significantly improve Janssen's predictions for the silo. We also looked at stress fluctuations, and showed that granular material are intrinsically fragile when subjected to changing external forces or perturbations. This property has been particulary studied within a scalar arching model with which we were able to visualize changes of stress paths and subsequent changes of the stress distribution. Ce travail porte sur la description de la manière dont les forces se propagent dans les milieux granulaires comme le sable. Cette catégorie de matériaux est en fait très vaste, et pouvoir prédire de manière satisfaisante la répartition des contraintes au sein d'un système granulaire est un enjeu industriel réel et concret. Or ceci est difficile. Une des raisons en est que cette répartition est très inhomog

Dynamical properties and their strain-dependence of ZnSe(ZnSe:N: Zinc-blende and wurtzite

Directory of Open Access Journals (Sweden)

Dandan Wang

2014-06-01

Full Text Available The lattice dynamical properties of ZnSe and ZnSe with substitutional N incorporation(ZnSe:N are investigated in both the zinc-blend(ZB and wurtzite(WZ structures using first-principles calculations. The optical phonon modes of ZB-ZnSe at the Γ-point locate at 250 cm−1 for LO and 213 cm−1 for TO. The characteristic E2 phonon modes at about 50 cm−1 and the E1 and another E2 phonon modes around 200 cm−1 of WZ-ZnSe are suggested to be the fingerprint for distinguishing the two polytypes of ZnSe. For substitutional N incorporated ZnSe, the N incorporation introduces three new high energy modes above 500 cm−1, and the splitting of them is much larger in the WZ phase than that in ZB phase. The strain dependence of phonon frequency which could be useful for corresponding spectroscopic strain characterization are also studied. The simple linear dependence is determined for ZB-ZnSe, while the situation for WZ-ZnSe looks more complicated.

Sharing Clinical Trial Data – A Proposal from the International Committee of Medical Journal Editors

Directory of Open Access Journals (Sweden)

Darren B. Taichman

2016-06-01

Full Text Available El Comité Internacional de Editores de Revistas Mé-dicas (ICMJE, por sus siglas en inglés considera que es una obligación ética compartir, de forma respon- sable, los datos generados por los ensayos clínicos, porque los participantes se han puesto en riesgo para ello.

78 FR 63795 - Endangered and Threatened Wildlife and Plants; Determination of Endangered Status for Chromolaena...

Science.gov (United States)

2013-10-24

... for Chromolaena frustrata (Cape Sable Thoroughwort), Consolea corallicola (Florida Semaphore Cactus... frustrata (Cape Sable Thoroughwort), Consolea corallicola (Florida Semaphore Cactus), and Harrisia...: Chromolaena frustrata (Cape Sable thoroughwort), Consolea corallicola (Florida semaphore cactus), and Harrisia...

Photoluminescence study of CdSe nanorods embedded in a PVA matrix

Energy Technology Data Exchange (ETDEWEB)

Sharma, Mamta [Centre of Advanced Study in Physics, Department of Physics, Panjab University, Chandigarh 160014 (India); Tripathi, S.K., E-mail: surya@pu.ac.in [Centre of Advanced Study in Physics, Department of Physics, Panjab University, Chandigarh 160014 (India)

2013-03-15

Nanometer-sized semiconductor CdSe nanorods have been successfully grown within polyvinyl alcohol (PVA) matrix by in situ technique. PVA:n-CdSe nanorods are characterized by X-ray diffraction, transmission electron microscopy, UV-vis spectrophotometer and photoluminescence spectroscopy. The photoluminescence spectra of PVA:n-CdSe nanorods are studied at different excitation wavelengths. PVA:n-CdSe nanorods have demonstrated to exhibit strong and well-defined green photoluminescence emission. The long-term stability of the PL properties of PVA:n-CdSe nanorods is also investigated in view of possible applications of polymer nanocomposites. The linear optical constants such as the extinction coefficient (k), real ({epsilon}{sub 1}) and imaginary ({epsilon}{sub 2}) dielectric constant, optical conductivity ({sigma}{sub opt}) are calculated for PVA:n-CdSe nanorods. The optical properties i.e. good photostability and larger stokes shift suggesting to apply PVA:n-CdSe nanorods in bioimaging applications. - Highlights: Black-Right-Pointing-Pointer In situ synthesis of PVA:n-CdSe via chemical bath method at room temperature. {open_square} From TEM image, the three arm nanorods morphology of PVA:n-CdSe is obtained. Black-Right-Pointing-Pointer The optical constants i.e. n, k, {epsilon}{sub 1}, {epsilon}{sub 2} and {sigma}{sub opt} are calculated. Black-Right-Pointing-Pointer Exhibiting green band photoemission peak at 540 nm.

Synthesis and properties of new CdSe-AgI-As2Se3 chalcogenide glasses

International Nuclear Information System (INIS)

Kassem, M.; Le Coq, D.; Fourmentin, M.; Hindle, F.; Bokova, M.; Cuisset, A.; Masselin, P.; Bychkov, E.

2011-01-01

Research highlights: → Determination of the glass-forming region in the pseudo-ternary CdSe-AgI-As 2 Se 3 system. → Characterization of macroscopic properties of the new CdSe-AgI-As 2 Se 3 glasses. → Far infrared transmission of chalcogenide glasses. → Characterization of the total conductivity of CdSe-AgI-As 2 Se 3 glasses. -- Abstract: The glass-forming region in the pseudo-ternary CdSe-AgI-As 2 Se 3 system was determined. Measurements including differential scanning calorimetry (DSC), density, and X-ray diffraction were performed. The effect resulting from the addition of CdSe or AgI has been highlighted by examining three series of different base glasses. The characteristic temperatures of the glass samples, including glass transition (T g ), crystallisation (T x ), and melting (T m ) temperatures are reported and used to calculate their ΔT = T x - T g and their Hruby, H r = (T x - T g )/(T m - T x ), criteria. Evolution of the total electrical conductivity σ and the room temperature conductivity σ 298 was also studied. The terahertz transparency domain in the 50-600 cm -1 region was pointed for different chalcogenide glasses (ChGs) and the potential of the THz spectroscopy was suggested to obtain structural information on ChGs.

Optical properties and electronic band structure of AgInSe2

International Nuclear Information System (INIS)

Ozaki, Shunji; Adachi, Sadao

2006-01-01

Optical properties of a chalcopyrite semiconductor AgInSe 2 have been studied by optical absorption, spectroscopic ellipsometry (SE), and thermoreflectance (TR) measurements. The measurements reveal distinct structures at energies of the critical points in the Brillouin zone. By performing the band-structure calculation, these critical points have been successfully assigned to specific points in the Brillouin zone. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (Abstract Copyright [2006], Wiley Periodicals, Inc.)

Opportunities and challenges for a sustainable energy policy in SE Europe: SE European Energy Community Treaty

International Nuclear Information System (INIS)

Mihajlov, Andjelka

2010-01-01

Energy demand continues to increase in turn raising concerns about energy supply. In this paper, the author has tried to systematize the role of the energy sector in South Eastern (SE) Europe in the context of the European energy policy process. This should make the energy sector in SE Europe more visible and open to substantial activities and appropriate funding. This is important to assure its full alignment with the European energy policy process, and in so doing, make it less fragile. According to the SE European Energy Community Treaty, parties to the Treaty are obliged to implement reforms in the energy and environmental sector in accordance with the European Union's respective policy. This paper raises awareness of the environmental requirements that have been set, of renewable energy and its implementation, at the same time pointing out that the response in SE Europe has been at a low level. It is believed that this paper could draw attention to the existing problems and could contribute to the establishment of a common integrated energy market in SE Europe and the EU. (author)

Formation of a crystalline InSe phase from a quaternary single crystal of the Cu-Ag-In-Se system by massive ion motion

Energy Technology Data Exchange (ETDEWEB)

Diaz, R., E-mail: raquel.diaz@uam.es [Departamento de Fisica Aplicada, M12, Facultad de Ciencias, Universidad Autonoma de Madrid, Cantoblanco, 28049 Madrid (Spain); Rueda, F. [Departamento de Fisica Aplicada, M12, Facultad de Ciencias, Universidad Autonoma de Madrid, Cantoblanco, 28049 Madrid (Spain)

2012-08-15

the group III elements throughout the layer. -- Highlights: Black-Right-Pointing-Pointer The paper shows composition, structure in a single crystal of the Cu-Ag-In-Se system. Black-Right-Pointing-Pointer Impedance spectra during annealing in the 0-120 Degree-Sign C range shows that the sample is a MIECs. Black-Right-Pointing-Pointer Strong changes in the spectra indicate a non-reversible process in the sample. Black-Right-Pointing-Pointer After annealing, a massive ion motion along the sample profile is observed. Black-Right-Pointing-Pointer The destruction of initial phase and the appearance of other chalcopyrite and an InSe phases.

Optical properties of thermally annealed CdZnSe/ZnSe quantum dots

International Nuclear Information System (INIS)

Margapoti, Emanuela

2010-01-01

To analyse the diffusion characteristics, photoluminescence (PL) spectroscopy has been carried out in extensive detail on single, as well as, ensembles of thermally annealed (TA) CdSe/ZnSe QDs. For a series of QD-ensembles, each annealed for t A = 30 s at temperatures from T A = 300-550 C, the change in the QD-composition has been calculated from the blue-shift of the exciton ground-state PL-emission, using a concentration function based on Fick's laws of diffusion. The diffusion length (L D ) and the activation energy (E A ) have been determined thereof. For the studied QDs, E A has been evaluated to be 2.2 eV. Additionally, TA results also in an enhancement of the PL-intensity and reduction of the full-width-at-half maximum (FWHM) of the spectra. This point towards an increased homogeneity of the QD-size and composition, and decrease in the concentration of defects around the QDs. For single CdSe/ZnSe QDs, TA has been varied from 100-240 C, in steps for 20 C, with t A kept fixed at 30 s. Finally, the evolution of the magneto-optic response with post-growth thermal annealing has been studied for both individual QDs and QD-ensembles. An external magnetic field, applied perpendicular to the plane of the QDs (Faraday configuration), results in Zeeman spin splitting of the ground exciton state. The emissions from the Zeeman-split states are left and right circularly polarized and from the degree of circular polarization (DCP), as well as, the spectral separation of the PL-peaks, the g-factor can be estimated. For CdSe/ZnSe QD-ensembles, the g-factor has been observed to change sign with TA. (orig.).

Optical properties of thermally annealed CdZnSe/ZnSe quantum dots

Energy Technology Data Exchange (ETDEWEB)

Margapoti, Emanuela

2010-07-01

To analyse the diffusion characteristics, photoluminescence (PL) spectroscopy has been carried out in extensive detail on single, as well as, ensembles of thermally annealed (TA) CdSe/ZnSe QDs. For a series of QD-ensembles, each annealed for t{sub A} = 30 s at temperatures from T{sub A} = 300-550 C, the change in the QD-composition has been calculated from the blue-shift of the exciton ground-state PL-emission, using a concentration function based on Fick's laws of diffusion. The diffusion length (L{sub D}) and the activation energy (E{sub A}) have been determined thereof. For the studied QDs, E{sub A} has been evaluated to be 2.2 eV. Additionally, TA results also in an enhancement of the PL-intensity and reduction of the full-width-at-half maximum (FWHM) of the spectra. This point towards an increased homogeneity of the QD-size and composition, and decrease in the concentration of defects around the QDs. For single CdSe/ZnSe QDs, TA has been varied from 100-240 C, in steps for 20 C, with t{sub A} kept fixed at 30 s. Finally, the evolution of the magneto-optic response with post-growth thermal annealing has been studied for both individual QDs and QD-ensembles. An external magnetic field, applied perpendicular to the plane of the QDs (Faraday configuration), results in Zeeman spin splitting of the ground exciton state. The emissions from the Zeeman-split states are left and right circularly polarized and from the degree of circular polarization (DCP), as well as, the spectral separation of the PL-peaks, the g-factor can be estimated. For CdSe/ZnSe QD-ensembles, the g-factor has been observed to change sign with TA. (orig.).

Synthesis and properties of new CdSe-AgI-As{sub 2}Se{sub 3} chalcogenide glasses

Energy Technology Data Exchange (ETDEWEB)

Kassem, M. [Univ Lille Nord de France, F-59000 Lille (France); ULCO, LPCA, EAC CNRS 4493 F-59140 Dunkerque (France); Le Coq, D., E-mail: david.lecoq@univ-littoral.fr [Univ Lille Nord de France, F-59000 Lille (France); ULCO, LPCA, EAC CNRS 4493 F-59140 Dunkerque (France); Fourmentin, M.; Hindle, F.; Bokova, M.; Cuisset, A.; Masselin, P.; Bychkov, E. [Univ Lille Nord de France, F-59000 Lille (France); ULCO, LPCA, EAC CNRS 4493 F-59140 Dunkerque (France)

2011-02-15

Research highlights: {yields} Determination of the glass-forming region in the pseudo-ternary CdSe-AgI-As{sub 2}Se{sub 3} system. {yields} Characterization of macroscopic properties of the new CdSe-AgI-As{sub 2}Se{sub 3} glasses. {yields} Far infrared transmission of chalcogenide glasses. {yields} Characterization of the total conductivity of CdSe-AgI-As{sub 2}Se{sub 3} glasses. -- Abstract: The glass-forming region in the pseudo-ternary CdSe-AgI-As{sub 2}Se{sub 3} system was determined. Measurements including differential scanning calorimetry (DSC), density, and X-ray diffraction were performed. The effect resulting from the addition of CdSe or AgI has been highlighted by examining three series of different base glasses. The characteristic temperatures of the glass samples, including glass transition (T{sub g}), crystallisation (T{sub x}), and melting (T{sub m}) temperatures are reported and used to calculate their {Delta}T = T{sub x} - T{sub g} and their Hruby, H{sub r} = (T{sub x} - T{sub g})/(T{sub m} - T{sub x}), criteria. Evolution of the total electrical conductivity {sigma} and the room temperature conductivity {sigma}{sub 298} was also studied. The terahertz transparency domain in the 50-600 cm{sup -1} region was pointed for different chalcogenide glasses (ChGs) and the potential of the THz spectroscopy was suggested to obtain structural information on ChGs.

Substances inertes et plantes à effet insecticide utilisées dans la ...

African Journals Online (AJOL)

Les insecticides naturels tels que les plantes à effet insecticide et les substances inertes (sable, cendre, terres à diatomées,…) méritent d'être valorisées afin de réduire l'utilisation des insecticides chimiques et protéger l'environnement. Ce travail basé sur une revue documentaire fouillée et actualisée vise à faire la genèse ...

First principles calculations of point defect diffusion in CdS buffer layers: Implications for Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4}-based thin-film photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Varley, J. B.; Lordi, V. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); He, X.; Rockett, A. [Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States)

2016-01-14

We investigate point defects in CdS buffer layers that may arise from intermixing with Cu(In,Ga)Se{sub 2} (CIGSe) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTSSe) absorber layers in thin-film photovoltaics (PV). Using hybrid functional calculations, we characterize the migration barriers of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities and assess the activation energies necessary for their diffusion into the bulk of the buffer. We find that Cu, In, and Ga are the most mobile defects in CIGS-derived impurities, with diffusion expected to proceed into the buffer via interstitial-hopping and cadmium vacancy-assisted mechanisms at temperatures ∼400 °C. Cu is predicted to strongly favor migration paths within the basal plane of the wurtzite CdS lattice, which may facilitate defect clustering and ultimately the formation of Cu-rich interfacial phases as observed by energy dispersive x-ray spectroscopic elemental maps in real PV devices. Se, Zn, and Sn defects are found to exhibit much larger activation energies and are not expected to diffuse within the CdS bulk at temperatures compatible with typical PV processing temperatures. Lastly, we find that Na interstitials are expected to exhibit slightly lower activation energies than K interstitials despite having a larger migration barrier. Still, we find both alkali species are expected to diffuse via an interstitially mediated mechanism at slightly higher temperatures than enable In, Ga, and Cu diffusion in the bulk. Our results indicate that processing temperatures in excess of ∼400 °C will lead to more interfacial intermixing with CdS buffer layers in CIGSe devices, and less so for CZTSSe absorbers where only Cu is expected to significantly diffuse into the buffer.

Maritimes and Northeast Pipeline : from pipe dream to reality

International Nuclear Information System (INIS)

Langan, P.T.

1998-01-01

A general project description and time schedule of the Maritimes and Northeast Pipeline project was presented. The pipeline project is a component of the Sable Offshore Energy Project which involves the development of six separate gas fields near Sable Island on the Scotian Shelf about 250 km off the south coast of Nova Scotia. The six fields under development represent about 3.5 trillion cubic feet of proven gas supply. Another 2 trillion cubic feet of gas has been discovered in nearby pools. There is an estimated additional 13 trillion cubic feet of potential gas reserve in the Scotian Shelf region. The 2 billion-dollar offshore project involves twenty-eight production wells, construction and installation of six platforms and a 225-km long two-phase pipeline from the central platform that will transport the product to shore. A gas plant will be constructed on-shore at Goldboro at which point the liquids will be stripped from the gas stream and transported by an onshore pipeline to Point Tupper, Cape Breton Island, to a fractionation facility for further market processing. The Maritimes and Northeast Pipeline will transport the gas product to markets in Nova Scotia, New Brunswick and New England. A number of unique challenges associated with the Maritimes and Northeast Pipeline project such as the problems of serving a new market, the highly competitive anchor market in the U.S., supply and operating characteristics, the regulatory process, and various competing projects were also reviewed. Sable offshore gas is scheduled to flow by late 1999

Canadian markets for east coast gas

International Nuclear Information System (INIS)

Cowan, N.

1998-01-01

Markets for natural gas in Canada's Maritime provinces were discussed. Maritime markets are the largest potential region, currently without access to natural gas, in Canada or the United States. Total market potential was estimated at 430,000 MMBtu/day or in excess of 150 BCF annually, with most market potential distribution in Halifax, Nova Scotia and in the Saint John, New Brunswick area. Maritimes and Northeast Pipeline is involved in a joint effort with Westcoast Energy Inc., Duke Energy, and Mobil Oil Canada in bringing the Sable Gas resources to market. Details of the Sable offshore project were provided. The project involves the development of six separate gas fields located near Sable Island, on the Scotian Shelf, approximately 250 km off the coast of Nova Scotia. The six fields under development represent about 3.5 trillion cubic feet of proven gas supply. Another two trillion cubic feet of gas has been discovered in nearby pools. There is an estimated additional 13 trillion cubic feet of potential gas reserve in the Scotian Shelf region. The two billion dollar offshore project involves twenty-eight production wells, construction and installation of six platforms and a 225 km long two-phase pipeline from the central platform that will transport the product to shore. A gas plant will be constructed on-shore at Goldboro at which point the liquids will be stripped from the gas stream and transported by an onshore pipeline to Point Tupper, Cape Breton Island, to a fractionation facility for further market processing

Optical studies of CdSe/HgSe and CdSe/Ag2Se core/shell nanoparticles embedded in gelatin

International Nuclear Information System (INIS)

Azhniuk, Yu M; Dzhagan, V M; Valakh, M Ya; Raevskaya, A E; Stroyuk, A L; Kuchmiy, S Ya; Zahn, D R T

2008-01-01

CdSe/HgSe and CdSe/Ag 2 Se core-shell nanoparticles are obtained by colloidal synthesis from aqueous solutions in the presence of gelatin. Optical absorption, luminescence, and Raman spectra of the nanoparticles obtained are measured. The variation of the optical spectra of CdSe/HgSe and CdSe/Ag 2 Se core-shell nanoparticles with the shell thickness is discussed. Sharp non-monotonous variation of the photoluminescence spectra at low shell coverage is observed.

Evaluation on ductile tearing properties of girth weld pipelines using SE(T) and SE(B) specimens

Energy Technology Data Exchange (ETDEWEB)

Mathias, Leonardo Luiz Siqueira; Ruggieri, Claudio [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Engenharia Naval e Oceanica

2012-07-01

Predictive methodologies aimed at quantifying the impact of defects in oil and gas pipelines play a key role in safety assessment procedures of in-service facilities. Current methodologies for structural integrity assessments advocate the use of geometry dependent resistance curves so that crack-tip constraint in the test specimen closely matches the crack tip constraint for the structural component. Testing standards now under development to measure fracture resistance of pipeline steels (J and CTOD) most often employ single edge notched specimens under tension (SENT) to match a postulated defect in the structural component. This paper presents an investigation of the ductile tearing properties for a girth weld of an API 5L X80 pipeline steel using experimentally measured crack growth resistance curves (J-R curves). Testing of the girth weld pipeline steels employed side-grooved, clamped SE(T) specimen with center-crack weld and side-grooved, three-point bending SE(B) (or SENB) specimens to determine the J-R curves. The methods were compared in terms of geometry, relative crack size and crack-tip constraint, and the results were applied to a case study, to evaluate the degree of conservativeness in defect acceptance criteria. The tests involving SE(B) specimens are usually considered conservative, however, the comparison between this two methods may point an accurate alternative for girth weld assessments, since adequate geometry is adopted to describe accurately the structure's behavior. (author)

Evolvement of soft templates in surfactant/cosurfactant system for shape control of ZnSe nanocrystals

Energy Technology Data Exchange (ETDEWEB)

Hou Bo [Key Laboratory of Medicinal Chemistry for Natural Resource, Ministry of Education, School of Chemical Science and Technology, Yunnan University, Kunming 650091 (China); Liu Yongjun [Advanced Analysis and Measurement Center, Yunnan University, Kunming 650091 (China); Li Yanjuan [Key Laboratory of Medicinal Chemistry for Natural Resource, Ministry of Education, School of Chemical Science and Technology, Yunnan University, Kunming 650091 (China); Yuan Bo [Advanced Analysis and Measurement Center, Yunnan University, Kunming 650091 (China); Jia Mingfen [Key Laboratory of Medicinal Chemistry for Natural Resource, Ministry of Education, School of Chemical Science and Technology, Yunnan University, Kunming 650091 (China); Jiang Fengzhi, E-mail: fengzhij@ynu.edu.cn [Key Laboratory of Medicinal Chemistry for Natural Resource, Ministry of Education, School of Chemical Science and Technology, Yunnan University, Kunming 650091 (China); Advanced Analysis and Measurement Center, Yunnan University, Kunming 650091 (China)

2012-03-25

Highlights: Black-Right-Pointing-Pointer Soft templates were found in the shape control synthesis of ZnSe nanocrystals. Black-Right-Pointing-Pointer Micelle formation model in the soft templates system was proposed and proved. Black-Right-Pointing-Pointer Different shapes of ZnSe nanocrystals were prepared and explained by proposed model. - Abstract: The evolution of soft templates in the synthesis of ZnSe nanocrystals realized through a surfactant/cosurfactant system was investigated and a micelle formation process model was proposed. Through freeze-fracture electron microscopy, it was proven that template micelles were formed in the zinc precursors. Furthermore, it was found that a long stirring period was essential for achieving the lowest energy state of the soft templates which were used for synthesizing monodisperse ZnSe quantum dots.

Composition determination of CdSxSe1-x mixed crystals by optical dispersion

International Nuclear Information System (INIS)

Iliev, I.; Dimov, T.; Ribarov, D.; Lange, H.

1989-01-01

An optical dispersion method has been developed determining the CdS/CdSe ratio in CdS x Se 1-x mixed crystals from the relationship between position of the isotropic point (birefrigence becomes zero for a definite wavelength at the absorption edge) and chemical composition x. Birefrigence spectra and piezo-optic spectra of samples with x = 0.2, 0.6, and 0.875 give the spectral position of the isotropic point (ip). A curve of wavelength of ip versus x of CdS x Se 1-x is evaluated by the least-squares procedure and tested by X-ray fluorescence analysis

Structural, optical and electrical characterization of Ag doped lead chalcogenide (PbSe) thin films

Energy Technology Data Exchange (ETDEWEB)

Al-Ghamdi, A.A., E-mail: aghamdi90@hotmail.com [Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah (Saudi Arabia); Al-Heniti, S. [Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah (Saudi Arabia); Khan, Shamshad A. [Department of Physics, St. Andrew' s College, Gorakhpur, UP (India)

2013-03-15

Research and development efforts are currently underway to fabricate a variety of solid state devices. A good deal of information regarding the synthesis, structural, optical and electrical properties of Ag doped lead chalcogenides have been revealed. The bulk polycrystalline (PbSe){sub 100-x}Ag{sub x} ternary chalcogenides are prepared by diffusion technique. The XRD patterns recorded for the (PbSe){sub 100-x}Ag{sub x} thin films prepared by vacuum deposition technique, show that these films are polycrystalline in nature. The optical measurements reveal that the (PbSe){sub 100-x}Ag{sub x} thin films possess direct band gap and the band gap energy decreases with an increase of Ag concentration. The extinction coefficient (k) and refractive index (n) are found to be changing by increasing Ag concentration in PbSe. These results are interpreted in terms of the change in concentration of localized states due to the shift in Fermi level. The dc conductivities of (PbSe){sub 100-x}Ag{sub x} thin films are measured in temperature range 303-403 K. It is observed that the dc conductivity increases at all the temperatures with an increase of Ag content in PbSe system. The experimental data suggests that the conduction is due to thermally assisted tunneling of the charge carriers in the localized states near the band edges. The activation energy and optical band gap are found to decrease with increasing Ag concentration in lead chalcogenide and there are good agreements between these two values. - Highlights: Black-Right-Pointing-Pointer (PbSe){sub 100-x}Ag{sub x} thin films has been investigated. Black-Right-Pointing-Pointer Polycrystalline nature has been verified by X-ray diffraction. Black-Right-Pointing-Pointer Optical absorption data showed the rules of direct transitions predominate. Black-Right-Pointing-Pointer Dc conductivity increases with an increase of Ag content in PbSe system. Black-Right-Pointing-Pointer Increase of Ag concentration causes a decrease in E{sub g

ZnSe/ZnSeTe Superlattice Nanotips

Directory of Open Access Journals (Sweden)

Young SJ

2010-01-01

Full Text Available Abstract The authors report the growth of ZnSe/ZnSeTe superlattice nanotips on oxidized Si(100 substrate. It was found the nanotips exhibit mixture of cubic zinc-blende and hexagonal wurtzite structures. It was also found that photoluminescence intensities observed from the ZnSe/ZnSeTe superlattice nanotips were much larger than that observed from the homogeneous ZnSeTe nanotips. Furthermore, it was found that activation energies for the ZnSe/ZnSeTe superlattice nanotips with well widths of 16, 20, and 24 nm were 76, 46, and 19 meV, respectively.

Absorption de l’eau et son effet sur la durabilité des bétons de sable allégés par ajout de copeaux de bois Water absorption and its effect on the durability of sand concrete lightened by the addition of wood shavings

Directory of Open Access Journals (Sweden)

Quéneudec M.

2012-09-01

Full Text Available L’objectif principal de ce travail est d’étudier l’effet de l’eau sur les bétons de sable léger à base de matériaux et de déchets locaux. Les matériaux utilisés sont un sable de dune et un sable d’oued et les déchets sont des fillers calcaires (déchets de concassage et des copeaux de bois (déchets de la menuiserie [1, 2]. En général, on a remarqué que dans le cas de copeaux de bois non traités, plus le taux de bois est élevé, plus l’absorption d’eau est importante, que ce soit par immersion ou par capillarité. En soumettant le matériau à une série de cycles “mouillage – séchage” accélérés, une légère diminution dans la résistance à la compression a été enregistrée. Par ailleurs, le traitement des copeaux de bois avant leur utilisation [3] a considérablement amélioré la résistance vis à vis de ces cycles “mouillage-séchage”. De même, l’absorption d’eau, par immersion et par capillarité, a été considérablement diminuée. Il convient de noter enfin, que ces résultats viennent confirmer la possibilité d’utilisation de ce matériau montrée par les résultats encourageants trouvés dans les travaux précédents, telles que les propriétés mécaniques et thermiques. The main objective of this work is to study the effect of water on lightweight sand concrete based on local materials and wastes The materials used are dune sand and river sand and the wastes are limestone fillers (aggregates crushing waste and wood shavings (wood work activities wastes [1, 2]. It was generally noted that in the case of untreated wood shavings, the higher the wood content, more important the water absorption, whether by immersion or by capillarity. By subjecting the material to a series of accelerated "wet – dry cycling", a slight decrease in compressive strength was recorded. Moreover, the treatment of wood shavings before their use [3] had greatly improved the resistance with respect to these

Ultra-thin ZnSe: Anisotropic and flexible crystal structure

Energy Technology Data Exchange (ETDEWEB)

Bacaksiz, C., E-mail: cihanbacaksiz@iyte.edu.tr [Department of Physics, Izmir Institute of Technology, 35430 Izmir (Turkey); Senger, R.T. [Department of Physics, Izmir Institute of Technology, 35430 Izmir (Turkey); Sahin, H. [Department of Photonics, Izmir Institute of Technology, 35430 Izmir (Turkey)

2017-07-01

Highlights: • Ultra-thin ZnSe is dynamically stable. • Ultra-thin ZnSe is electronically direct-gap semiconductor. • Ultra-thin ZnSe is ultra-flexible. • Ultra-thin ZnSe is mechanically in-plane anisotropic. - Abstract: By performing density functional theory-based calculations, we investigate the structural, electronic, and mechanical properties of the thinnest ever ZnSe crystal . The vibrational spectrum analysis reveals that the monolayer ZnSe is dynamically stable and has flexible nature with its soft phonon modes. In addition, a direct electronic band gap is found at the gamma point for the monolayer structure of ZnSe. We also elucidate that the monolayer ZnSe has angle dependent in-plane elastic parameters. In particular, the in-plane stiffness values are found to be 2.07 and 6.89 N/m for the arm-chair and zig-zag directions, respectively. The angle dependency is also valid for the Poisson ratio of the monolayer ZnSe. More significantly, the in-plane stiffness of the monolayer ZnSe is the one-tenth of Young modulus of bulk zb-ZnSe which indicates that the monolayer ZnSe is a quite flexible single layer crystal. With its flexible nature and in-plane anisotropic mechanical properties, the monolayer ZnSe is a good candidate for nanoscale mechanical applications.

Ultra-thin ZnSe: Anisotropic and flexible crystal structure

International Nuclear Information System (INIS)

Bacaksiz, C.; Senger, R.T.; Sahin, H.

2017-01-01

Highlights: • Ultra-thin ZnSe is dynamically stable. • Ultra-thin ZnSe is electronically direct-gap semiconductor. • Ultra-thin ZnSe is ultra-flexible. • Ultra-thin ZnSe is mechanically in-plane anisotropic. - Abstract: By performing density functional theory-based calculations, we investigate the structural, electronic, and mechanical properties of the thinnest ever ZnSe crystal . The vibrational spectrum analysis reveals that the monolayer ZnSe is dynamically stable and has flexible nature with its soft phonon modes. In addition, a direct electronic band gap is found at the gamma point for the monolayer structure of ZnSe. We also elucidate that the monolayer ZnSe has angle dependent in-plane elastic parameters. In particular, the in-plane stiffness values are found to be 2.07 and 6.89 N/m for the arm-chair and zig-zag directions, respectively. The angle dependency is also valid for the Poisson ratio of the monolayer ZnSe. More significantly, the in-plane stiffness of the monolayer ZnSe is the one-tenth of Young modulus of bulk zb-ZnSe which indicates that the monolayer ZnSe is a quite flexible single layer crystal. With its flexible nature and in-plane anisotropic mechanical properties, the monolayer ZnSe is a good candidate for nanoscale mechanical applications.

The Role of Bituminous Sands in Extending the Petroleum Era Beyond 2000 A. D. (Summary Le rôle des sables bitumineux pour prolonger l'ère du pétrole au-delà de l'an 2000 (résumé

Directory of Open Access Journals (Sweden)

Carrigy M.

2006-10-01

Full Text Available Bituminous sand is an energy resource that is receiving increasing attention and there is a strong interest by the international community in co-operating in the development of new methods of exploration, and in the solution of common technological problems to reduce the time when oil from this enormous energy source is available. A detailed knowledge of the geological setting and the reservoir is of paramount importance to the assessment of the magnitude of the resource, its successful exploitation and to facilitate the transfer of the highly complicated recovery technology from one deposit to another. Much research also remains to be done to improve our understanding of the origin of the bitumen and the factors controlling the location of its accumulation. Based on the scant information we have, it is estimated that bituminous sand deposits contain from 5 to 10 x 10. 12 (trillion barrels of crude bitumen and are surely large enough to make a significant contribution to extending the petroleum era until alternative energy sources are developed. However, great amounts of synthetic oil from this source will probably not be brought onto the market until after the year 2000 A. D. because of the high capital cost, and large numbers of skilled technicians required to bring them into production. In the more industrialized nations where the demand for portable liquid fuel is strongest, notably Canada, Venezuela, and USA, billions of dollars are being spent on exploring and exploiting their bituminous sand resources. It is, however, in those undeveloped nations, who cannot afford to buy light crude oil, and who have bituminous deposits, where exploitation of this resource should have its greatest impact. It is therefore imperative that all geologists be aware of the new technologies that are now available to turn these low-grade hydrocarbons into high-grade products. Une attention croissante est accordée aux sables bitumineux comme source d

Interaction of Se and GaSe with Si(111)

International Nuclear Information System (INIS)

Meng, Shuang; Schroeder, B. R.; Olmstead, Marjorie A.

2000-01-01

Deposition of Se and GaSe on Si(111)7x7 surfaces was studied with low-energy electron diffraction, x-ray photoelectron spectroscopy, and x-ray photoelectron diffraction to probe initial nucleation and interface structure for GaSe/Si(111) heteroepitaxy. Room-temperature deposition of Se on Si(111)7x7 results in an amorphous film. Subsequent annealing leads to Se evaporation without ordering or interdiffusion. Se deposition at 450 degree sign C saturates at submonolayer coverage with no diffusion of Se into the substrate. There is no clear evidence of ordered sites for the Se. Growth of GaSe on Si(111)7x7 above 500 degree sign C results in a pseudomorphic bilayer, with Si-Ga-Se bonding. Additional GaSe does not stick to the bilayer above 525 degree sign C. The resulting Se lone pair at the surface leads to an ideally passivated surface similar to As/Si(111). This stable surface is similar to the layer termination in bulk GaSe. The single domain bilayer is oriented with the Ga-Se bond parallel to the substrate Si-Si bond. (c) 2000 The American Physical Society

Transition probabilities in neutron-rich Se,8684

Science.gov (United States)

Litzinger, J.; Blazhev, A.; Dewald, A.; Didierjean, F.; Duchêne, G.; Fransen, C.; Lozeva, R.; Sieja, K.; Verney, D.; de Angelis, G.; Bazzacco, D.; Birkenbach, B.; Bottoni, S.; Bracco, A.; Braunroth, T.; Cederwall, B.; Corradi, L.; Crespi, F. C. L.; Désesquelles, P.; Eberth, J.; Ellinger, E.; Farnea, E.; Fioretto, E.; Gernhäuser, R.; Goasduff, A.; Görgen, A.; Gottardo, A.; Grebosz, J.; Hackstein, M.; Hess, H.; Ibrahim, F.; Jolie, J.; Jungclaus, A.; Kolos, K.; Korten, W.; Leoni, S.; Lunardi, S.; Maj, A.; Menegazzo, R.; Mengoni, D.; Michelagnoli, C.; Mijatovic, T.; Million, B.; Möller, O.; Modamio, V.; Montagnoli, G.; Montanari, D.; Morales, A. I.; Napoli, D. R.; Niikura, M.; Pollarolo, G.; Pullia, A.; Quintana, B.; Recchia, F.; Reiter, P.; Rosso, D.; Sahin, E.; Salsac, M. D.; Scarlassara, F.; Söderström, P.-A.; Stefanini, A. M.; Stezowski, O.; Szilner, S.; Theisen, Ch.; Valiente Dobón, J. J.; Vandone, V.; Vogt, A.

2015-12-01

Reduced quadrupole transition probabilities for low-lying transitions in neutron-rich Se,8684 are investigated with a recoil distance Doppler shift (RDDS) experiment. The experiment was performed at the Istituto Nazionale di Fisica Nucleare (INFN) Laboratori Nazionali di Legnaro using the Cologne Plunger device for the RDDS technique and the AGATA Demonstrator array for the γ -ray detection coupled to the PRISMA magnetic spectrometer for an event-by-event particle identification. In 86Se the level lifetime of the yrast 21+ state and an upper limit for the lifetime of the 41+ state are determined for the first time. The results of 86Se are in agreement with previously reported predictions of large-scale shell-model calculations using Ni78-I and Ni78-II effective interactions. In addition, intrinsic shape parameters of lowest yrast states in 86Se are calculated. In semimagic 84Se level lifetimes of the yrast 41+ and 61+ states are determined for the first time. Large-scale shell-model calculations using effective interactions Ni78-II, JUN45, jj4b, and jj4pna are performed. The calculations describe B (E 2 ;21+→01+) and B (E 2 ;61+→41+) fairly well and point out problems in reproducing the experimental B (E 2 ;41+→21+) .

Variaciones en los patrones de pigmentación y de color de larvas de poblaciones naturales de anofeles albimanus de Colombia

Directory of Open Access Journals (Sweden)

Marco F. Suárez

1986-12-01

Full Text Available Fueron observados el patrón de pigmentación y el color del cuerpo de las larvas de III y IV estadio en poblaciones naturales de Anopheles albimanus procedentes de cuatro áreas geográficas y ecológicas diferentes. Se incluyen tres variantes de la cápsula de la cabeza, el sable curvado de las antenas y la pigmentación; nueve variantes de la pigmentación del cuerpo y 17 del color del cuerpo. Se informa la alta variación en los patrones de color y otras características visibles. Se incluye una breve descripción de cada variante y la frecuencia observada en cada población.

Determination of As and Se in crude oil diluted in xylene by inductively coupled plasma mass spectrometry using a dynamic reaction cell for interference correction on {sup 80}Se

Energy Technology Data Exchange (ETDEWEB)

Albuquerque, Fernanda Inda de [Departamento de Quimica, Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), Rua Marques de Sao Vicente 225, 22451-900 Rio de Janeiro, RJ (Brazil); Duyck, Christiane B., E-mail: cbduyck@vm.uff.br [Departamento de Quimica, Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), Rua Marques de Sao Vicente 225, 22451-900 Rio de Janeiro, RJ (Brazil); Departamento de Quimica, Universidade Federal Fluminense (UFF), Outeiro Sao Joao Batista s/n, Centro, 24020-150, Niteroi, RJ (Brazil); Fonseca, Teresa Cristina O. [Centro de Pesquisas Leopoldo A. Miguez de Mello da Petrobras (CENPES) (Brazil); Saint' Pierre, Tatiana D. [Departamento de Quimica, Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), Rua Marques de Sao Vicente 225, 22451-900 Rio de Janeiro, RJ (Brazil)

2012-05-15

-ICP-MS showed to be an adequate and a faster method. - Highlights: Black-Right-Pointing-Pointer Xylene introduction in ICP-MS. Black-Right-Pointing-Pointer CH{sub 4} for removal of Ar{sub 2}{sup +} interference on m/z 80 (Se) in DRC-ICP-MS. Black-Right-Pointing-Pointer Total As and Se concentrations in crude oils. Black-Right-Pointing-Pointer Comparison with HG-ICP-MS.

The Formation Mechanism of Cu(In0.7Ga0.3Se2 Nanoparticles and the Densification Trajectory of the Se-Rich Quaternary Target by Hot Pressing

Directory of Open Access Journals (Sweden)

Qiang Ma

2018-03-01

Full Text Available In this paper, a method to obtain the CuInGaSe2 (CIGS absorber layer with an appropriate selenium content is put forward, in which a Se-rich target is used to deposit a CIGS thin-film and this film is annealed in a Se-free inert atmosphere. The key issue of this method is the preparation of a Se-rich target with a homogeneous composition and a high-density. The formation mechanism of CuInSe2 and CuGaSe2 is investigated and the results point to the intermediate phase Cu2−xSe playing a role of a nucleation core. The sintering densification trajectory of the target with the addition of extra selenium is researched. Additionally, an effective way to avoid the sintering defects is proposed. Finally, a conversion efficiency of 11.2% for the CIGS solar cell is reached by sputtering from the obtained Se-rich target.

Evolution of Seismic Velocities in Heavy Oil Sand Reservoirs during Thermal Recovery Process Évolution des vitesses sismiques dans les réservoirs de sables bitumineux au cours des procédés de récupération thermique

Directory of Open Access Journals (Sweden)

Nauroy J.-F.

2013-01-01

Full Text Available In thermally enhanced recovery processes like Cyclic Steam Stimulation (CSS or Steam Assisted Gravity Drainage (SAGD, continuous steam injection entails changes in pore fluid, pore pressure and temperature in the rock reservoir, that are most often unconsolidated or weakly consolidated sandstones. This in turn increases or decreases the effective stresses and changes the elastic properties of the rocks. Thermally enhanced recovery processes give rise to complex couplings. 4D seismic surveys are currently conducted to delineate the steam-affected areas but the interpretation is difficult. However, it is essential for optimization of reservoir development. Numerical simulations have been carried out on a case study so as to provide an estimation of the evolution of pressure, temperature, pore fluid saturation, stress and strain in any zone located around the injector and producer wells. The approach of Ciz and Shapiro (2007 (Geophysics 72, A75-A79 has been used to model the velocity dispersion in the oil sand mass under different conditions of temperature and stress. A good agreement has been found between these predictions and some laboratory velocity measurements carried out on samples of Canadian oil sand. Results appear to be useful to better interpret 4D seismic data in order to locate the steam chamber. Dans les procédés de récupération des huiles lourdes par méthodes thermiques, comme ia stimulation cyclique par vapeur (CSS ou le drainage par gravité assisté par vapeur (SAGD, l’injection de vapeur en continu entraîne des changements de liquide de pores, de pression interstitielle et de température dans la roche réservoir, qui est constituée le plus souvent de sable non consolidés ou faiblement consolidés- Ces changements à leur tour augmentent ou diminuent les contraintes effectives et modifient les propriétés élastiques des roches. Les procédés de récupération par méthodes thermiques mettent en oeuvre des couplages

Discovery of highly spin-polarized conducting surface states in the strong spin-orbit coupling semiconductor Sb2Se3

Science.gov (United States)

Das, Shekhar; Sirohi, Anshu; Kumar Gupta, Gaurav; Kamboj, Suman; Vasdev, Aastha; Gayen, Sirshendu; Guptasarma, Prasenjit; Das, Tanmoy; Sheet, Goutam

2018-06-01

Majority of the A2B3 -type chalcogenide systems with strong spin-orbit coupling (SOC), such as Bi2Se3,Bi2Te3 , and Sb2Te3 , etc., are topological insulators. One important exception is Sb2Se3 where a topological nontrivial phase was argued to be possible under ambient conditions, but such a phase could be detected to exist only under pressure. In this paper, we show that Sb2Se3 like Bi2Se3 displays a generation of highly spin-polarized current under mesoscopic superconducting point contacts as measured by point-contact Andreev reflection spectroscopy. In addition, we observe a large negative and anisotropic magnetoresistance of the mesoscopic metallic point contacts formed on Sb2Se3 . Our band-structure calculations confirm the trivial nature of Sb2Se3 crystals and reveal two trivial surface states one of which shows large spin splitting due to Rashba-type SOC. The observed high spin polarization and related phenomena in Sb2Se3 can be attributed to this spin splitting.

Extended analyses of Se VII and Se VIII

International Nuclear Information System (INIS)

Vankleef, Th.A.M.; Joshi, Y.N.

1984-01-01

Joshi et al. (1984) have conducted an analysis of the 3d8 4s-3d8 4p transitions in As VII. The present investigation is concerned with an analysis of similar transitions in Se VIII. The selenium spectrum was photographed in the 400-1200-A wavelength region on a variety of normal-incidence spectrographs. Attention is given to least-squares-fit (LSF) and Hartree-Fock (HF) parameter values for the 3d9 4d configuration of Se VII, LSF and HF parameter values for the 3d8 4s and 3d8 4p configurations of Se VIII, the energy and composition of the levels of the 3d9 4d configuration of Se VII, classified lines in Se VII, energy levels and composition of the 3d8 4s configuration and the revised and newly determined levels of the 3d8 4p configuration of Se VIII, and newly classified lines of Se VIII. 15 references

The Ag2Se-HgSe-GeSe2 system and crystal structures of the compounds

International Nuclear Information System (INIS)

Parasyuk, O.V.; Gulay, L.D.; Romanyuk, Ya.E.; Olekseyuk, I.D.; Piskach, L.V.

2003-01-01

The phase diagram of the quasi-ternary Ag 2 Se-HgSe-GeSe 2 system at 298 K was investigated using X-ray phase analysis and metallography. The formation of five intermediate quaternary phases β (Ag ∼7.12-∼6.32 Hg ∼0.44-∼0.82 GeSe 6 ), γ (Ag ∼6.08-∼4.00 Hg ∼0.96-∼2.00 GeSe 6 ), δ (Ag 3.4 Hg 2.3 GeSe 6 ), ε (Ag ∼2.24-∼2.00 Hg ∼2.88-∼3.00 GeSe 6 ) and ∼Ag 1.4 Hg 1.3 GeSe 6 was established. The crystal structure of the β-phase (for the Ag 6.504 Hg 0.912 GeSe 6 composition) was determined using X-ray single crystal diffraction. It crystallizes in a cubic structure (space group F4-bar 3m) with the lattice parameter a=1.09026(4) nm. The crystal structure of the δ-phase (Ag 3.4 Hg 2.3 GeSe 6 ) was determined using X-ray powder diffraction (space group F4-bar 3m, a=1.07767(8) nm). The crystal structure determination of the γ-phase (space group Pmn2 1 ) was performed for the compositions Ag 5.6 Hg 1.2 GeSe 6 , Ag 4.8 Hg 1.6 GeSe 6 and Ag 4 Hg 2 GeSe 6 using X-ray powder diffraction. The crystal structure of the LT-Hg 2 GeSe 4 compound (space group I4-bar , a=0.56786(2), c=1.12579(5) nm) was confirmed by powder diffraction also.

V1.42In1.83Mo15Se19

Directory of Open Access Journals (Sweden)

Michel Potel

2010-10-01

Full Text Available The structure of the title compound, vanadium indium pentadecamolybdenum nonadecaselenide, V1.42In1.83Mo15Se19, is isotypic with In2.9Mo15Se19 [Grüttner et al. (1979. Acta Cryst. B35, 285–292]. It is characterized by two cluster units Mo6Sei8Sea6 and Mo9Sei11Sea6 (where i represents inner and a apical atoms that are present in a 1:1 ratio. The cluster units are centered at Wyckoff positions 2b and 2c and have point-group symmetry overline{3} and overline{6}, respectively. The clusters are interconnected through additional Mo—Se bonds. In the title compound, the V3+ cations replace the trivalent indium atoms present in In2.9Mo15Se19, and a deficiency is observed on the monovalent indium site. One Mo, one Se and the V atom are situated on mirror planes, and two other Se atoms and the In atom are situated on threefold rotation axes.

Critical point dewetting: competition between the gravity and the dispersion force

International Nuclear Information System (INIS)

Ohmasa, Y; Takahashi, S; Fujii, K; Yao, M

2008-01-01

Near the critical temperature of an immiscible binary liquid system, a solid substrate is usually covered completely by one of the liquid phases. This phenomenon is called the 'critical point wetting , which is predicted by Cahn in 1977, and have been confirmed for many fluid systems experimentally. However, we found that liquid Se-Tl system on a quartz substrate does not show the critical point wetting near the liquid-liquid critical point. On a contrary, when the temperature goes down from the critical point, a Se-rich wetting film intrudes between the Tl-rich bulk liquid and the quartz wall. This result is a clear evidence of the 'critical point dewetting' phenomenon. It is suggested from a theoretical consideration that the critical point dewetting takes place as a result of the competition between the long-range dispersion force and the gravity

Intermixing at the absorber-buffer layer interface in thin-film solar cells: The electronic effects of point defects in Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4} devices

Energy Technology Data Exchange (ETDEWEB)

Varley, J. B.; Lordi, V. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States)

2014-08-14

We investigate point defects in the buffer layers CdS and ZnS that may arise from intermixing with Cu(In,Ga)(S,Se){sub 2} (CIGS) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTS) absorber layers in thin-film photovoltaics. Using hybrid functional calculations, we characterize the electrical and optical behavior of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities in the buffer. We find that In and Ga substituted on the cation site act as shallow donors in CdS and tend to enhance the prevailing n-type conductivity at the interface facilitated by Cd incorporation in CIGS, whereas they are deep donors in ZnS and will be less effective dopants. Substitutional In and Ga can favorably form complexes with cation vacancies (A-centers) which may contribute to the “red kink” effect observed in some CIGS-based devices. For CZTS absorbers, we find that Zn and Sn defects substituting on the buffer cation site are electrically inactive in n-type buffers and will not supplement the donor doping at the interface as in CIGS/CdS or ZnS devices. Sn may also preferentially incorporate on the S site as a deep acceptor in n-type ZnS, which suggests possible concerns with absorber-related interfacial compensation in CZTS devices with ZnS-derived buffers. Cu, Na, and K impurities are found to all have the same qualitative behavior, most favorably acting as compensating acceptors when substituting on the cation site. Our results suggest one beneficial role of K and Na incorporation in CIGS or CZTS devices is the partial passivation of vacancy-related centers in CdS and ZnS buffers, rendering them less effective interfacial hole traps and recombination centers.

Concentrations of Se, Ba, Zn and Mn in Brazil nuts

Energy Technology Data Exchange (ETDEWEB)

Armelin, Maria José A.; Maihara, Vera A.; Cardoso, Paulo S.; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Cozollino, Silvia M.F., E-mail: marmelin@ipen.br, E-mail: vmaihara@ipen.br, E-mail: msaiki@ipen.br, E-mail: pscsilva@ipen.br, E-mail: smfcozzo@usp.br [Universidade de São Paulo (USP), SP (Brazil). Faculdade de Ciências Farmacêuticas

2017-07-01

The concentrations of Se, Ba, Zn and Mn were determined in samples of Brazil nuts collected in two ways: a) in a production farm predominantly for export and, b) in various points of sale from different regions of Brazil. Instrumental neutron activation analysis was the analytical technique used in this study. Results indicate that the concentrations of Se and Ba varied greatly among the Brazil nut samples analyzed. This large variability may be related to the soil characteristics from which the nuts were produced. An inverse correlation was observed between the concentrations of Se and Ba. On the other hand, the concentrations of Zn and Mn did not show significant differences among these samples. (author)

Concentrations of Se, Ba, Zn and Mn in Brazil nuts

International Nuclear Information System (INIS)

Armelin, Maria José A.; Maihara, Vera A.; Cardoso, Paulo S.; Saiki, Mitiko; Cozollino, Silvia M.F.

2017-01-01

The concentrations of Se, Ba, Zn and Mn were determined in samples of Brazil nuts collected in two ways: a) in a production farm predominantly for export and, b) in various points of sale from different regions of Brazil. Instrumental neutron activation analysis was the analytical technique used in this study. Results indicate that the concentrations of Se and Ba varied greatly among the Brazil nut samples analyzed. This large variability may be related to the soil characteristics from which the nuts were produced. An inverse correlation was observed between the concentrations of Se and Ba. On the other hand, the concentrations of Zn and Mn did not show significant differences among these samples. (author)

Phase diagram of Se-CaIn4Se7 system

International Nuclear Information System (INIS)

Musaeva, R.I.; Aliev, I.I; Ismailova, F.I; Aliev, A.A

2011-01-01

Full text: The Se-CaIn 4 Se 7 system has been studied using methods of differential thermal analysis, X-ray diffraction, micro structural analysis, density measurements and its phase diagram has been constructed. It has been established that the section Se-CaIn 4 Se 7 is a quasibinary section of the ternary system Ca-In-Se. At room temperature, on the basis of CaIn 2 Se 4 and Se no solid solution has been found

On Some Physical Properties of GeSe3-Sb2Se3-ZnSe Thin Films and Their Radiation Response

International Nuclear Information System (INIS)

Hosni, H.M.M.A.

2010-01-01

Thin films of the chalcogenides GeSe 3 , Sb 2 Se 3 , ZnSe, (GeSe 3 )80(Sb 2 Se 3 )20 and (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20, are prepared by thermal evaporation onto glass substrates. The effect of ZnSe incorporation with both GeSe 3 , Sb 2 Se 3 results in amorphous (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20 composition as obtained from the X-ray analysis. Electrical measurements reveal a decrease in dc activation energy, ΔEdc, and an increase in ac activation energy, ΔEac, for (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20 as compared with (GeSe 3 )80(Sb 2 Se 3 )20. Optical energy gap, Eg, and band tail width, Ee, are estimated in UV/VIS spectral region for fresh and γ-irradiated films, revealing a decrease in Eg and an increase in Ee for ZnSe and (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20 compositions, with irradiation dose.

Composition determination of CdS sub x Se sub 1-x mixed crystals by optical dispersion

Energy Technology Data Exchange (ETDEWEB)

Iliev, I; Dimov, T; Ribarov, D [Pedagogical High School, Schumen (Bulgaria); Lange, H [Akademie der Wissenschaften der DDR, Berlin (German Democratic Republic). Zentralinstitut fuer Elektronenphysik

1989-10-16

An optical dispersion method has been developed determining the CdS/CdSe ratio in CdS{sub x}Se{sub 1-x} mixed crystals from the relationship between position of the isotropic point (birefrigence becomes zero for a definite wavelength at the absorption edge) and chemical composition x. Birefrigence spectra and piezo-optic spectra of samples with x = 0.2, 0.6, and 0.875 give the spectral position of the isotropic point (ip). A curve of wavelength of ip versus x of CdS{sub x}Se{sub 1-x} is evaluated by the least-squares procedure and tested by X-ray fluorescence analysis.

Semiconductor-metal transition of Se in Ru-Se Catalyst Nanoparticles

Science.gov (United States)

Babu, P. K.; Lewera, Adam; Oldfield, Eric; Wieckowski, Andrzej

2009-03-01

Ru-Se composite nanoparticles are promising catalysts for the oxygen reduction reaction (ORR) in fuel cells. Though the role of Se in enhancing the chemical stability of Ru nanoparticles is well established, the microscopic nature of Ru-Se interaction was not clearly understood. We carried out a combined investigation of ^77Se NMR and XPS on Ru-Se nanoparticles and our results indicate that Se, a semiconductor in elemental form, becomes metallic when interacting with Ru. ^77Se spin-lattice relaxation rates are found to be proportional to T, the well-known Korringa behavior characteristic of metals. The NMR results are supported by the XPS binding energy shifts which suggest that a possible Ru->Se charge transfer could be responsible for the semiconductor->metal transition of Se which also makes Ru less susceptible to oxidation during ORR.

In vivo formation of natural HgSe nanoparticles in the liver and brain of pilot whales

DEFF Research Database (Denmark)

Gajdosechova, Z.; Lawan, M. M.; Urgast, D. S.

2016-01-01

Se) nanoparticles in the liver and brain of long-finned pilot whales are attached to Se-rich structures and possibly act as a nucleation point for the formation of large Se-Hg clusters, which can grow with age to over 5 μm in size. The detoxification mechanism is fully developed from the early age of the animals...

Bio-fortification and isotopic labelling of Se metabolites in onions and carrots following foliar application of Se and 77Se

DEFF Research Database (Denmark)

Kápolna, Emese; Laursen, Kristian H.; Husted, Søren

2012-01-01

Se. The 77Se- labelled metabolites in onions were predominantly γ-glutamyl-77Se-selenomethyl-selenocysteine (γ-glu-Me77SeCys), 77Se-methylselenocysteine (Me77SeCys) and 77Se-selenomethionine (77SeMet). Furthermore, we report here for the first time the finding in carrots of the bioactive Me77SeCys...

Van der Waals Epitaxy of GaSe/Graphene Heterostructure: Electronic and Interfacial Properties.

Science.gov (United States)

Ben Aziza, Zeineb; Henck, Hugo; Pierucci, Debora; Silly, Mathieu G; Lhuillier, Emmanuel; Patriarche, Gilles; Sirotti, Fausto; Eddrief, Mahmoud; Ouerghi, Abdelkarim

2016-10-07

Stacking two-dimensional materials in so-called van der Waals (vdW) heterostructures, like the combination of GaSe and graphene, provides the ability to obtain hybrid systems which are suitable to design optoelectronic devices. Here, we report the structural and electronic properties of the direct growth of multilayered GaSe by Molecular beam Epitaxy (MBE) on graphene. Reflection high-energy electron diffraction (RHEED) images exhibited sharp streaky features indicative of high quality GaSe layer produced via a vdW epitaxy. Micro-Raman spectroscopy showed that, after the vdW hetero-interface formation, the Raman signature of pristine graphene is preserved. However, the GaSe film tuned the charge density of graphene layer by shifting the Dirac point by about 80 meV toward lower binding energies, attesting an electron transfer from graphene to GaSe. Angle-resolved photoemission spectroscopy (ARPES) measurements showed that the maximum of the valence band of few layers of GaSe are located at the Γ point at a binding energy of about -0.73 eV relatively to the Fermi level (p-type doping). From the ARPES measurements, a hole effective mass defined along the ΓM direction and equal to about m*/m0 = -1.1 was determined. By coupling the ARPES data with high resolution X-ray photoemission spectroscopy (HR-XPS) measurements, the Schottky interface barrier height was estimated to be 1.2 eV. These findings allow deeper understanding of the interlayer interactions and the electronic structure of GaSe/graphene vdW heterostructure.

Gas by the turn of the century

Energy Technology Data Exchange (ETDEWEB)

McDonald, S. [Sable Offshore Energy Inc., Halifax, NS (Canada)

1999-07-01

The impact that the Sable Offshore Energy Project will have on the economy of Nova Scotia was discussed with particular focus on the current status of the project and the growth of the offshore industry in eastern Canada. Exploration activity in the area, which has been headed by Mobil Oil Canada and Shell Canada Ltd., has been ongoing for more than three decades. The development plan for the project gained final regulatory approval in 1997. Sable Offshore Energy Inc. is responsible for the development and production of the raw gas from six offshore natural gas fields including Thebaud, Venture, North Triumph, Alma, Glenelg, and South Venture. Combined, these six fields have reserves estimated at 3.5 trillion cubic feet of natural gas to be produced over the next 20 to 25 years. Sable Offshore Energy Inc. will also be responsible for processing the gas and associated liquids to market quality at onshore facilities. Sable Offshore Energy Inc. is an owner operating company representing Mobil Oil Canada, Shell Canada Ltd., Imperial Oil Resources, Nova Scotia Resources, and Mosbacher Operating Ltd. These owner companies are responsible for marketing the natural gas and associated liquids in the Maritimes and elsewhere in North America. The Maritimes and Northeast Pipeline Co. will transport Sable natural gas to markets in Nova Scotia, New Brunswick and New England as early as November 1999.

Review of experimental and natural invertebrate hosts of sealworm (Pseudoterranova decipiens and its distribution and abundance in macroinvertebrates in eastern Canada

Directory of Open Access Journals (Sweden)

David J Marcogliese

2001-11-01

Full Text Available Experimental and natural invertebrate intermediate hosts of sealworm (Pseudoterranova decipiens as well as transmission experiments of sealworm from invertebrates to fish are reviewed and summarized. Experimental hosts include copepods, mysids, cumaceans, isopods, amphipods, decapods, annelids, and molluscs. Invertebrates collected from eastern Canada between 1989 and 1995 were checked for nematode infections by microscopic examination of dissected animals or enzymatic digestion of bulk samples. Third-stage larval sealworm were found in mysids (Neomysis americana, Mysis stenolepis from Passamaquoddy Bay, the Bras d’Or Lakes, inshore Cape Breton, Sable Island and Sable Island Bank. Infected amphipods (Amphiporeia virginiana, Americorchestia megalophthalma, Gammarus spp. were found only on Sable Island. Typical infection rates in macroinvertebrates were 1-4/1000. No sealworm infections were found in approximately 18,000 amphipods examined from Sable Island Bank, the site of the most heavily infected fishes in eastern Canada. In Wallace Lake, a brackish pond on Sable Island, infection rates were much higher in mysids than in amphipods. Estimates of rates of transmission of sealworm from invertebrates to fish were derived from infection levels in Wallace Lake and feeding experiments involving sticklebacks and invertebrate prey. It is concluded that mysids may be much more important than amphipods in transmitting sealworm to fish hosts.

Gas by the turn of the century

International Nuclear Information System (INIS)

McDonald, S.

1999-01-01

The impact that the Sable Offshore Energy Project will have on the economy of Nova Scotia was discussed with particular focus on the current status of the project and the growth of the offshore industry in eastern Canada. Exploration activity in the area, which has been headed by Mobil Oil Canada and Shell Canada Ltd., has been ongoing for more than three decades. The development plan for the project gained final regulatory approval in 1997. Sable Offshore Energy Inc. is responsible for the development and production of the raw gas from six offshore natural gas fields including Thebaud, Venture, North Triumph, Alma, Glenelg, and South Venture. Combined, these six fields have reserves estimated at 3.5 trillion cubic feet of natural gas to be produced over the next 20 to 25 years. Sable Offshore Energy Inc. will also be responsible for processing the gas and associated liquids to market quality at onshore facilities. Sable Offshore Energy Inc. is an owner operating company representing Mobil Oil Canada , Shell Canada Ltd., Imperial Oil Resources, Nova Scotia Resources, and Mosbacher Operating Ltd. These owner companies are responsible for marketing the natural gas and associated liquids in the Maritimes and elsewhere in North America. The Maritimes and Northeast Pipeline Co. will transport Sable natural gas to markets in Nova Scotia, New Brunswick and New England as early as November 1999

Study of crystallization kinetics and structural relaxation behavior in phase separated Ag{sub 33}Ge{sub 17}Se{sub 50} glassy alloys

Energy Technology Data Exchange (ETDEWEB)

Kumar, Praveen, E-mail: prafiziks@gmail.com [Semiconductors Laboratory, Department of Physics, GND University, Amritsar 143005 (India); Nanotechnology Research Centre, DAV Institute of Engineering and Technology, Kabir Nagar, Jalandhar 144008 (India); Yannopoulos, S.N. [Foundation for Research and Technology Hellas, Institute of Chemical Engineering and High Temperature Chemical Processes (FORTH/ICE-HT), P.O. Box 1414, GR-26 504, Rio-Patras (Greece); Sathiaraj, T.S. [Department of Physics, University of Botswana, Gaborone (Botswana); Thangaraj, R., E-mail: rthangaraj@rediffmail.com [Semiconductors Laboratory, Department of Physics, GND University, Amritsar 143005 (India)

2012-07-16

We report on the crystallization processes and structure (crystal phases) of Ag{sub 33}Ge{sub 17}Se{sub 50} glassy alloy using differential scanning calorimetry and x-ray diffraction techniques, respectively. The devitrification that gives rise to the first exothermic peak results in the crystallization of Ag{sub 2}Se and Ag{sub 8}GeSe{sub 6} phases, while the growth of GeSe{sub 2} accompanied by the transformation of Ag{sub 8}GeSe{sub 6} to Ag{sub 2}Se phase occurs during the second crystallization process. Different theoretical models are used to elucidate various kinetic parameters for the crystallization transformation process in this phase separated system. With annealing below the glass transition temperature, an inverse behavior between the variation of the optical gap and the band tailing parameter is observed for the thermally evaporated films. These results are explained as the mixing of different clusters/species in the amorphous state and/or changes caused by structural relaxation of the glassy network for the thermally evaporated films. - Highlights: Black-Right-Pointing-Pointer Phase separation in Ag{sub 33}Ge{sub 17}Se{sub 50} glassy alloy bordering two glass forming regions. Black-Right-Pointing-Pointer Transformation of Ag{sub 8}GeSe{sub 6} {yields} Ag{sub 2}Se along with crystallization GeSe{sub 2} phase. Black-Right-Pointing-Pointer Elucidation of various kinetic parameters for the crystalline transformation. Black-Right-Pointing-Pointer Structural relaxation in thermally evaporated films by optical spectroscopy.

One-step synthesis of PbSe-ZnSe composite thin film

Directory of Open Access Journals (Sweden)

Abe Seishi

2011-01-01

Full Text Available Abstract This study investigates the preparation of PbSe-ZnSe composite thin films by simultaneous hot-wall deposition (HWD from multiple resources. The XRD result reveals that the solubility limit of Pb in ZnSe is quite narrow, less than 1 mol%, with obvious phase-separation in the composite thin films. A nanoscale elemental mapping of the film containing 5 mol% PbSe indicates that isolated PbSe nanocrystals are dispersed in the ZnSe matrix. The optical absorption edge of the composite thin films shifts toward the low-photon-energy region as the PbSe content increases. The use of a phase-separating PbSe-ZnSe system and HWD techniques enables simple production of the composite package.

Magnetothermoelectric properties of Bi2Se3

Science.gov (United States)

Fauqué, Benoît; Butch, Nicholas P.; Syers, Paul; Paglione, Johnpierre; Wiedmann, Steffen; Collaudin, Aurélie; Grena, Benjamin; Zeitler, Uli; Behnia, Kamran

2013-01-01

We present a study of entropy transport in Bi2Se3 at low temperatures and high magnetic fields. In the zero-temperature limit, the magnitude of the Seebeck coefficient quantitatively tracks the Fermi temperature of the three-dimensional Fermi surface at the Γ point as the carrier concentration changes by two orders of magnitude (1017 to 1019 cm-3). In high magnetic fields, the Nernst response displays giant quantum oscillations indicating that this feature is not exclusive to compensated semimetals. A comprehensive analysis of the Landau level spectrum firmly establishes a large g factor in this material and a substantial decrease of the Fermi energy with increasing magnetic field across the quantum limit. Thus, the presence of bulk carriers significantly affects the spectrum of the intensively debated surface states in Bi2Se3 and related materials.

36 CFR 7.32 - Pictured Rocks National Lakeshore.

Science.gov (United States)

2010-07-01

... waters of Lake Superior, Grand Sable Lake, on the major lakeshore visitor use roads that are unplowed, or...: the Grand Sable Visitor Center parking lot and barn; the structures comprising the Grand Marais... management activities and objectives. [47 FR 54932, Dec. 7, 1982, as amended at 49 FR 18450, Apr. 30, 1984...

Exploring FeSe-based superconductors by liquid ammonia method

International Nuclear Information System (INIS)

Ying Tian-Ping; Wang Gang; Jin Shi-Feng; Shen Shi-Jie; Zhang Han; Zhou Ting-Ting; Lai Xiao-Fang; Wang Wan-Yan; Chen Xiao-Long

2013-01-01

Our recent progress on the preparation of a series of new FeSe-based superconductors and the clarification of SC phases in potassium-intercalated iron selenides are reviewed here. By the liquid ammonia method, metals Li, Na, Ca, Sr, Ba, Eu, and Yb are intercalated in between FeSe layers and form superconductors with transition temperatures of 30 K∼46 K, which cannot be obtained by high-temperature routes. In the potassium-intercalated iron selenides, we demonstrate that at least two SC phases exist, K x Fe 2 Se 2 (NH 3 ) y (x ≈ 0.3 and 0.6), determined mainly by the concentration of potassium. NH 3 has little, if any, effect on superconductivity, but plays an important role in stabilizing the structures. All these results provide a new starting point for studying the intrinsic properties of this family of superconductors, especially for their particular electronic structures. (topical review - iron-based high temperature superconductors)

Structure and optical properties of GaSe-CdSe composites driven by Cd intercalation in GaSe lamellar crystals

International Nuclear Information System (INIS)

Caraman, Iuliana; Kantser, Valeriu; Evtodiev, Igor; Untila, Dumitru; Dmitroglo, Liliana; Leontie, Liviu; Arzumanyan, Grigory

2015-01-01

A new composite material composed of GaSe and CdSe has been obtained by treatment of GaSe single-crystal lamellas in Cd vapors at temperatures of 773-853 K and intercalation of Cd interlayers. The structure and optical properties of the GaSe-CdSe composite material have been studied. The content of CdSe crystallites was found to grow with increasing treatment temperature or with increasing duration of treatment at a constant temperature. Analysis of XRD, PL, XPS, AFM, and Raman patterns has shown that the heterogeneous composite composed of micro and nanocrystallites of CdSe in GaSe can be obtained by Cd intercalation in a temperature range of 753-853 K. On the basis of Raman spectrum, the vibrational modes of the composite have been identified. The PL of these materials contains emission bands of free and bound excitons, donor-acceptor bands, and bands of recombination via impurity levels. The PL emission spectra measured at a temperature of 78 and 300 K for the composites result from the overlapping of the emission bands of the components of GaSe doped with Cd and the CdSe crystallites. (authors)

Stable and metastable phases in reciprocal systems PbSe + Ag2I2 Ag2Se + PbI2 and PbSe + CdI2 = CdSe + PbI2

International Nuclear Information System (INIS)

Odin, I.N.; Grin'ko, V.V.; Kozlovskij, V.F.; Safronov, E.V.

2005-01-01

Mutual system PbSe + Ag 2 I 2 = Ag 2 Se + PbI 2 is investigated. It is shown that diagonal Ag 2 Se-PbI 2 is stable. Liquidus surface and isothermal section at 633 K of phase diagram of PbSe-Ag 2 Se-PbI 2 system are built. Transformations directing to crystallization metastable ternary compound forming in PbSe-PbI 2 system and metastable polytype modifications of lead iodide in PbSe-Ag 2 Se-PbI 2 system at 620-685 K are studied. By hardening from molten state (1150-1220 K) new interstitial metastable phases crystallizing in CdCl 2 structural type are obtained in PbSe-Ag 2 Se-PbI 2 and PbSe + CdI 2 = CdSe + PbI 2 systems [ru

Neutron diffraction study of high temperature phase of K2SeO4

International Nuclear Information System (INIS)

Iwata, Yutaka; Koyano, Nobumitsu; Shibuya, Iwao; Hidaka, Masanori; Okazaki, Atsushi.

1984-01-01

The crystal structure of high-temperature phase of K 2 SeO 4 has been determined by means of single crystal neutron diffraction. The space group is P6 3 /mmc of hexagonal system with two formula units per unit cell. The structure is characterized by an averaged dispositions of SeO 4 tetrahedra with one of its Se-O bonds pointing parallel and antiparallel to the hexagonal c-axis in addition to the split distribution of potassium atoms. Heavily distorted distribution of oxygen atoms in SeO 4 is observed in Fourier maps corrersponding to split positions and reorientational motion of tetrahedra. This disordered arrangement is found to have close relation with the room temperature orthorhombic structure. The hexagonal-orthorhombic phase transition of K 2 SeO 4 at 472 0 C is grouped to an order-disorder type. (author)

Synthesis and characterization of ZnSe:Fe/ZnSe core/shell nanocrystals

Energy Technology Data Exchange (ETDEWEB)

Yang, Lin; Zhu, Jianguo, E-mail: yanglin_1028@163.com; Xiao, Dingquan

2014-04-15

High-quality ZnSe:Fe/ZnSe core/shell nanocrystals were prepared via a hydrothermal microemulsion technique. Effective surface passivation of monodisperse ZnSe:Fe nanocrystals is achieved by overcoating them with a ZnSe shell. The samples were characterized by means of XRD, EDX, TEM, PSD, XPS, photoluminescence, and Raman spectrum. The results show that the as-synthesized nanocrystals are cubic zinc blende ZnSe structure with high purity and the average particle size of ZnSe:Fe/ZnSe core/shell nanocrystal is larger than that of ZnSe:Fe core. The growth of ZnSe shell causes a small red shift in PL spectra, and then the PL quantum yield (QY) increases from 16% before shell growth to the maximum of 37% after increasing shell thickness up to 1.2 monolayers (ML). Moreover, both transverse optic (TO) and longitudinal optic (LO) phonon modes of ZnSe are shifted toward lower frequency as compared with the reported ones. -- Highlights: • ZnSe:Fe/ZnSe core/shell QDs were prepared by a hydrothermal microemulsion method. • ZnSe shell efficiently passivates surface defects by serving as a physical barrier. • The particle size and PL properties can be turned with the growth of ZnSe shell. • The luminescence efficiency and stability of QDs could be improved in this manner.

Thermoelectric prospects of chemically deposited PbSe and SnSe thin films

Science.gov (United States)

Nair, P. K.; Martínez, Ana Karen; Rosa García Angelmo, Ana; Barrios Salgado, Enue; Nair, M. T. S.

2018-03-01

Thin films of PbSe of 400-600 nm in thickness, were obtained via chemical deposition from a solution containing lead nitrate, thiourea and selenosufate. SnSe thin films of 90-180 nm in thickness, were also obtained by chemical deposition from a solution containing selenosulfate. Optical and electrical properties of these thin films were significantly altered by heating them in selenium vapor at 300 °C. Thin film PbSe has a bandgap (Eg) of 1.17 eV (direct gap, forbidden transitions), which decreases to 0.77 eV when it has been heated. Its electrical conductivity (σ) is p-type: 0.18 Ω-1 cm-1 (as-prepared), and 6.4 Ω-1 cm-1 when heated. Thin film SnSe is of orthorhombic crystalline structure which remains stable when heated at 300 °C, but its Eg increases from 1.12 eV (indirect) in as-prepared film to 1.5 eV (direct, forbidden transitions) upon heating. Its electrical conductivity is p-type, which increases from 0.3 Ω-1 cm-1 (as-prepared) to 1 Ω-1 cm-1 when heated (without Se-vapor). When SnSe film is heated at 300 °C in the presence of Se-vapor, they transform to SnSe2, with Eg of 1.5 eV (direct, forbidden) with n-type electrical conductivity, 11 Ω-1 cm-1. The Seebeck coefficient for the PbSe films is: +0.55 mV K-1 (as prepared) and +0.275 mV K-1 (heated); for SnSe films it is: +0.3 mV K-1 (as prepared) and +0.20 mV K-1 (heated); and for SnSe2 film, - 0.35 mV K-1. A five-element PbSe-SnSe2-PbSe-SnSe2-PbSe thermoelectric device demonstrated 50 mV for a temperature difference ΔT = 20 °C (2.5 mV K-1). For SnSe-SnSe2-SnSe-SnSe2-SnSe device, the value is 15 mV for ΔT = 20 °C (0.75 mV K-1). Prospect of these thin films in thermoelectric devices of hybrid materials, in which the coatings may be applied on distinct substrate and geometries is attractive.

Superior Gas Sensing Properties of Monolayer PtSe2

KAUST Repository

Sajjad, Muhammad

2016-12-15

First-principles calculations of the structural and electronic properties of monolayer 1T-PtSe2 with adsorbed (a) NO2, (b) NO, (c) NH3, (d) H2O, (e) CO2, and (f) CO molecules are discussed. The results point to great potential of the material in gas sensor applications. Superior sensitivity is demonstrated by transport calculations using the nonequilibrium Green\\'s function method.

Expression and crystallization of SeDsbA, SeDsbL and SeSrgA from Salmonella enterica serovar Typhimurium

International Nuclear Information System (INIS)

Jarrott, R.; Shouldice, S. R.; Gunčar, G.; Totsika, M.; Schembri, M. A.; Heras, B.

2010-01-01

The cloning, purification, crystallization and preliminary crystallographic studies of three DsbA-like proteins present in S. enterica serovar Typhimurium, SeDsbA, SeDsbL and SeSrgA, are reported. Pathogens require protein-folding enzymes to produce functional virulence determinants. These foldases include the Dsb family of proteins, which catalyze oxidative folding in bacteria. Bacterial disulfide catalytic processes have been well characterized in Escherichia coli K-12 and these mechanisms have been extrapolated to other organisms. However, recent research indicates that the K-12 complement of Dsb proteins is not common to all bacteria. Importantly, many pathogenic bacteria have an extended arsenal of Dsb catalysts that is linked to their virulence. To help to elucidate the process of oxidative folding in pathogens containing a wide repertoire of Dsb proteins, Salmonella enterica serovar Typhimurium has been focused on. This Gram-negative bacterium contains three DsbA proteins: SeDsbA, SeDsbL and SeSrgA. Here, the expression, purification, crystallization and preliminary diffraction analysis of these three proteins are reported. SeDsbA, SeDsbL and SeSrgA crystals diffracted to resolution limits of 1.55, 1.57 and 2.6 Å and belonged to space groups P2 1 , P2 1 2 1 2 and C2, respectively

Study of structural and optical properties of Cd{sub 1-x}Zn{sub x}Se thin films

Energy Technology Data Exchange (ETDEWEB)

Wahab, L.A., E-mail: aly_lo2003@yahoo.com [National Center for Radiation Research and Technology, Nasr City, Cairo (Egypt); Zayed, H.A. [University Collage of Women for Art, Science and Education, Ain Shams University, Cairo (Egypt); El-Galil, A.A. Abd [National Center for Radiation Research and Technology, Nasr City, Cairo (Egypt)

2012-06-01

Cd{sub 1-x}Zn{sub x}Se (x = 0, 0.5 and 1) thin films have been deposited onto glass substrates using thermal evaporation technique. The lattice constants, grain size, microstrain and dislocation density were studied by using X-ray diffraction. In addition the optical constants were calculated in the wavelength range 400-2500 nm. Transmittance and reflectance were used to calculate the absorption coefficient {alpha} and the optical band gap E{sub g}. The linear relation of ({alpha}h{upsilon}){sup 2} as a function of photon energy h{upsilon} for the thin films illustrated that the films exhibit a direct band gap, which increases with increasing Zn content. This increasing of optical band gap was interpreted in accordance to the increasing in the cohesive energy. Optical constants, such as refractive index n, optical conductivity {sigma}{sub opt}, complex dielectric constant, relaxation time {tau} and dissipation factor tan{delta} were determined. The optical dispersion parameters E{sub 0}, E{sub d} were determined according to Wemple and Di Domenico method. - Highlights: Black-Right-Pointing-Pointer ZnSe thin film has cubic zinc blende structure while CdSe and Cd{sub 0.5}Zn{sub 0.5}Se thin films have hexagonal structure. Black-Right-Pointing-Pointer Grain size of Cd{sub 1-x}Zn{sub x}Se decreases with increasing x (x = 0, 0.5 and 1). Black-Right-Pointing-Pointer Optical band gap increases with increasing x.

CuInSe2 nano-crystallite reaction kinetics using solid state reaction from Cu2Se and In2Se3 powders

International Nuclear Information System (INIS)

Hsiang, Hsing-I; Lu, Li-Hsin; Chang, Yu-Lun; Ray, Dahtong; Yen, Fu-Su

2011-01-01

Highlights: → CuInSe 2 phase increased gradually accompanied with a decrease in γ-In 2 Se 3 and no intermediate phase during calcination. → CuInSe 2 formation from Cu 2 Se and In 2 Se 3 powders follows a one-dimensional diffusion-controlled reaction with apparent activation energy of about 122.5 kJ/mol. → The solid reaction kinetics may be dominated by the diffusion of In 3+ ions. - Abstract: The reaction mechanism and CuInSe 2 formation kinetics using a solid state reaction from Cu 2 Se and In 2 Se 3 powders synthesized using a heating up process were investigated using X-ray diffractomy (XRD) and transmission electron microscopy (TEM). It was observed that the CuInSe 2 phase increased gradually, accompanied with a decrease in γ-In 2 Se 3 with no intermediate phase as the calcination temperature and soaking time were increased. The reaction kinetics was analyzed using the Avrami and polynomial kinetic model, suggesting that CuInSe 2 formation from Cu 2 Se and In 2 Se 3 powders follows a diffusion-controlled reaction with an apparent activation energy of about 122.5-182.3 kJ/mol. Cu 2 Se and In 2 Se 3 phases react and directly transform into CIS without the occurrence of any intermediate phase and the size of the newly formed CuInSe 2 crystallites was close to that of the Cu 2 Se reactant particle based on the TEM results, which indicated that the solid reaction kinetics may be dominated by the diffusion of In 3+ ions.

Controllable size reduction of CdSe nanowires through the intermediate formation of Se-coated CdSe nanowires using acid and thermal treatment

Energy Technology Data Exchange (ETDEWEB)

Lam, N S [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Wong, K W [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Li, Q [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Zheng, Z [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Lau, W M [Surface Science Western, University of Western Ontario, London, ON, N6A 5B7 (Canada)

2007-10-17

Thinning of CdSe nanowires (NWs) with controllable size was achieved by a simple acid treatment and subsequent annealing on thick CdSe NWs synthesized from vapour phase growth. During acid treatment, not only the undesired impurities such as native oxides of Cd and Se could be etched, but surface reactions of CdSe NWs were also observed, resulting in the formation of a layer of elemental Se around a thinner CdSe core. As a result, a heterostructure of Se - CdSe nanostructure formed after acid treatment of CdSe NWs. Upon thermal annealing, the Se shell was effectively removed and thinned stoichiometric single-crystalline CdSe NWs could be obtained. It was observed that NWs could be thinned by up to {approx}60% in diameter by acid treatment and subsequent Se thermal desorption. The degree of thinning was controllable by adjusting the duration of acid treatment. The success of the thinning of CdSe NWs by simple acid treatment and the annealing process reported here opens a new processing route for obtaining stoichiometric CdSe NWs with controllable size reduction and improved aspect ratio. This can undoubtedly broadly improve the range of applications of 1D CdSe nanostructures and allow more exploration of their uni-directional properties. A correction was made to the last paragraph of section 3 on 18 September 2007. The corrected electronic version is identical to the print version.

Controllable size reduction of CdSe nanowires through the intermediate formation of Se-coated CdSe nanowires using acid and thermal treatment

International Nuclear Information System (INIS)

Lam, N S; Wong, K W; Li, Q; Zheng, Z; Lau, W M

2007-01-01

Thinning of CdSe nanowires (NWs) with controllable size was achieved by a simple acid treatment and subsequent annealing on thick CdSe NWs synthesized from vapour phase growth. During acid treatment, not only the undesired impurities such as native oxides of Cd and Se could be etched, but surface reactions of CdSe NWs were also observed, resulting in the formation of a layer of elemental Se around a thinner CdSe core. As a result, a heterostructure of Se - CdSe nanostructure formed after acid treatment of CdSe NWs. Upon thermal annealing, the Se shell was effectively removed and thinned stoichiometric single-crystalline CdSe NWs could be obtained. It was observed that NWs could be thinned by up to ∼60% in diameter by acid treatment and subsequent Se thermal desorption. The degree of thinning was controllable by adjusting the duration of acid treatment. The success of the thinning of CdSe NWs by simple acid treatment and the annealing process reported here opens a new processing route for obtaining stoichiometric CdSe NWs with controllable size reduction and improved aspect ratio. This can undoubtedly broadly improve the range of applications of 1D CdSe nanostructures and allow more exploration of their uni-directional properties. A correction was made to the last paragraph of section 3 on 18 September 2007. The corrected electronic version is identical to the print version

One pot synthesis, growth mechanism and optical properties of Zn{sub 1-x}Cd{sub x}Se graded core/shell and alloy nanocrystals

Energy Technology Data Exchange (ETDEWEB)

Sonawane, Kiran G. [Department of Physics, University of Pune, Pune 411 007 (India); Patil, K.R. [Centre for Materials Characterization, National Chemical Laboratory, Pune 411 008 (India); Mahamuni, Shailaja, E-mail: shailajamahamuni@yahoo.co.in [Department of Physics, University of Pune, Pune 411 007 (India)

2013-03-15

Comparatively higher photoluminescence yield along with robustness of core/shell semiconductor nanocrystals make them attractive candidates for studying intricate quantum size effects. Here, we report, one pot synthesis of Zn{sub 1-x}Cd{sub x}Se graded core/shell structures by exploiting change in the reactivity of precursors. Optical and structural measurements indicate formation of graded structure. Growth mechanism probed by inductively coupled plasma atomic emission spectroscopy shows formation of graded core/shell structure, with CdSe rich core and ZnSe rich shell. Annealing these nanocrystals, in chemical bath, leads to diffusion of Cd from core to shell region. Formation of Zn{sub 1-x}Cd{sub x}Se alloy is also observed in X-ray photoelectron spectroscopic measurements, confirming the diffusion of Cd from core to shell region. Substantially high photoluminescence quantum efficiency of 60% with narrow line width of about 27 nm, was observed and is attributable to the reduced strain due to graded core/shell structure. - Highlights: Black-Right-Pointing-Pointer Graded CdSe/ZnSe core-shell nanocrystals are synthesized exploiting reactivity of precursors. Black-Right-Pointing-Pointer Growth mechanism is probed using ICP-AES spectroscopy. Black-Right-Pointing-Pointer Reduced strain leads to luminescence efficiency as high as 60%. Black-Right-Pointing-Pointer Alloy formation by annealing in chemical bath is probed using XPS.

Benefits of oxygen in CuInSe{sub 2} and CuGaSe{sub 2} containing Se-rich grain boundaries

Energy Technology Data Exchange (ETDEWEB)

Feng, Chunbao, E-mail: chunbaofeng@126.com [Department of Mathematics and Physics, Chongqing University of Posts and Telecommunications, Chongqing, 400065 (China); Luo, Min; Li, Bolin; Li, Dengfeng [Department of Mathematics and Physics, Chongqing University of Posts and Telecommunications, Chongqing, 400065 (China); Nie, Jinlan [Department of Applied Physics, University of Electronic Science and Technology of China, Chengdu, 610054 (China); Dong, Huining [Department of Mathematics and Physics, Chongqing University of Posts and Telecommunications, Chongqing, 400065 (China)

2014-05-01

Using density functional theory calculation, we show that oxygen (O) exhibits an interesting effect in CuInSe{sub 2} and CuGaSe{sub 2}. The Se atoms with dangling bonds in a Se-rich Σ3 (114) grain boundary (GB) create deep gap states due to strong interaction between Se atoms. However, when such a Se atom is substituted by an O atom, the deep gap states can be shifted into valence band, making the site no longer a harmful non-radiative recombination center. We find that O atoms prefer energetically to substitute these Se atoms and induce significant lattice relaxation due to their smaller atomic size and stronger electronegativity, which effectively reduces the anion–anion interaction. Consequently, the deep gap states are shifted to lower energy regions close or even below the top of the valence band.

The vertical structure of the Saharan boundary layer: Observations and modelling

Science.gov (United States)

Garcia-Carreras, L.; Parker, D. J.; Marsham, J. H.; Rosenberg, P.; Marenco, F.; Mcquaid, J.

2012-04-01

The vertical structure of the Saharan atmospheric boundary layer (SABL) is investigated with the use of aircraft data from the Fennec observational campaign, and high-resolution large-eddy model (LEM) simulations. The SABL is one of the deepest on Earth, and crucial in controlling the vertical redistribution and long-range transport of dust in the Sahara. The SABL is typically made up of an actively growing convective region driven by high sensible heating at the surface, with a deep, near-neutrally stratified Saharan residual layer (SRL) above it, which is mostly well mixed in humidity and temperature and reaches a height of ~500hPa. These two layers are usually separated by a weak (≤1K) temperature inversion, making the vertical structure very sensitive to the surface fluxes. Large-eddy model (LEM) simulations initialized with radiosonde data from Bordj Bardji Mokhtar (BBM), southern Algeria, are used to improve our understanding of the turbulence structure of the stratification of the SABL, and any mixing or exchanges between the different layers. The model can reproduce the typical SABL structure from observations, and a tracer is used to illustrate the growth of the convective boundary layer into the residual layer above. The heat fluxes show a deep entrainment zone between the convective region and the SRL, potentially enhanced by the combination of a weak lid and a neutral layer above. The horizontal variability in the depth of the convective layer was also significant even with homogeneous surface fluxes. Aircraft observations from a number of flights are used to validate the model results, and to highlight the variability present in a more realistic setting, where conditions are rarely homogeneous in space. Stacked legs were performed to get an estimate of the mean flux profile of the boundary layer, as well as the variations in the vertical structure of the SABL with heterogeneous atmospheric and surface conditions. Regular radiosondes from BBM put

Magnetic Weyl Semimetal in Quasi Two-dimensional Half Metallic Co$_3$Sn$_2$Se$_2$

OpenAIRE

Xu, Qiunan; Liu, Enke; Shi, Wujun; Muechler, Lukas; Felser, Claudia; Sun, Yan

2017-01-01

We have found a ferromagnetic Weyl semimetal (WSM) in half metallic Co$_3$Sn$_2$Se$_2$. The three pairs of Weyl points near Fermi level (E$_F$) are derived from nodal lines gapped by spin-orbit coupling (SOC). Though the Weyl points are 0.11 eV above the charge neutral point, Fermi arc related states in the cleaved surface can range from E$_F$ -0.15 to E$_F$ +0.11 eV in energy space, due to the surface bands dispersion. Hence, Weyl points related physics should be detected by surface measurem...

Molten-droplet synthesis of composite CdSe hollow nanoparticles

KAUST Repository

Gullapalli, Sravani; Grider, Jason M.; Bagaria, Hitesh G.; Lee, Kyusung; Cho, Minjung; Colvin, Vicki L.; Jabbour, Ghassan E.; Wong, Michael

2012-01-01

Many colloidal synthesis routes are not scalable to high production rates, especially for nanoparticles of complex shape or composition, due to precursor expense and hazards, low yields, and the large number of processing steps. The present work describes a strategy to synthesize hollow nanoparticles (HNPs) out of metal chalcogenides, based on the slow heating of a low-melting-point metal salt, an elemental chalcogen, and an alkylammonium surfactant in octadecene solvent. The synthesis and characterization of CdSe HNPs with an outer diameter of 15.6 ± 3.5 nm and a shell thickness of 5.4 ± 0.9 nm are specifically detailed here. The HNP synthesis is proposed to proceed with the formation of alkylammonium-stabilized nano-sized droplets of molten cadmium salt, which then come into contact with dissolved selenium species to form a CdSe shell at the droplet surface. In a reaction-diffusion mechanism similar to the nanoscale Kirkendall effect it is speculated that the cadmium migrates outwardly through this shell to react with more selenium, causing the CdSe shell to thicken. The proposed CdSe HNP structure comprises a polycrystalline CdSe shell coated with a thin layer of amorphous selenium. Photovoltaic device characterization indicates that HNPs have improved electron transport characteristics compared to standard CdSe quantum dots, possibly due to this selenium layer. The HNPs are colloidally stable in organic solvents even though carboxylate, phosphine, and amine ligands are absent; stability is attributed to octadecene-selenide species bound to the particle surface. This scalable synthesis method presents opportunities to generate hollow nanoparticles with increased structural and compositional variety. © 2012 IOP Publishing Ltd.

Molten-droplet synthesis of composite CdSe hollow nanoparticles

KAUST Repository

Gullapalli, Sravani

2012-11-16

Many colloidal synthesis routes are not scalable to high production rates, especially for nanoparticles of complex shape or composition, due to precursor expense and hazards, low yields, and the large number of processing steps. The present work describes a strategy to synthesize hollow nanoparticles (HNPs) out of metal chalcogenides, based on the slow heating of a low-melting-point metal salt, an elemental chalcogen, and an alkylammonium surfactant in octadecene solvent. The synthesis and characterization of CdSe HNPs with an outer diameter of 15.6 ± 3.5 nm and a shell thickness of 5.4 ± 0.9 nm are specifically detailed here. The HNP synthesis is proposed to proceed with the formation of alkylammonium-stabilized nano-sized droplets of molten cadmium salt, which then come into contact with dissolved selenium species to form a CdSe shell at the droplet surface. In a reaction-diffusion mechanism similar to the nanoscale Kirkendall effect it is speculated that the cadmium migrates outwardly through this shell to react with more selenium, causing the CdSe shell to thicken. The proposed CdSe HNP structure comprises a polycrystalline CdSe shell coated with a thin layer of amorphous selenium. Photovoltaic device characterization indicates that HNPs have improved electron transport characteristics compared to standard CdSe quantum dots, possibly due to this selenium layer. The HNPs are colloidally stable in organic solvents even though carboxylate, phosphine, and amine ligands are absent; stability is attributed to octadecene-selenide species bound to the particle surface. This scalable synthesis method presents opportunities to generate hollow nanoparticles with increased structural and compositional variety. © 2012 IOP Publishing Ltd.

Electronic structure and intersubband magnetoabsorption spectra of CdSe/CdS core-shell nanowires

Science.gov (United States)

Xiong, Wen

2016-10-01

The electronic structures of CdSe/CdS core-shell nanowires are calculated based on the effective-mass theory, and it is found that the hole states in CdSe/CdS core-shell nanowires are strongly mixed, which are very different from the hole states in CdSe or CdS nanowires. In addition, we find the three highest hole states at the Γ point are almost localized in the CdSe core and the energies of the hole states in CdSe/CdS core-shell nanowires can be enhanced greatly when the core radius Rc increases and the total radius R is fixed. The degenerate hole states are split by the magnetic field, and the split energies will increase when |Jh | increases from 1/2 to 7/2, while they are almost not influenced by the change of the core radius Rc. The absorption spectra of CdSe/CdS core-shell nanowires at the Γ point are also studied in the magnetic field when the temperature T is considered, and we find there are only two peaks will arise if the core radius Rc and the temperature T increase. The intensity of each optical absorption can be considerably enhanced by increasing the core radius Rc when the temperature T is fixed, it is due to the increase of their optical transition matrix element. Meanwhile, the intensity of each optical absorption can be decreased when the temperature T increases and the core radius Rc is fixed, and this is because the Fermi-Dirac distribution function of the corresponding hole states will increase as the increase of the temperature T.

Alternative syntheses of [73,75Se]selenoethers exemplified for homocysteine[73,75Se]selenolactone

International Nuclear Information System (INIS)

Ermert, J.; Blum, T.; Hamacher, K.; Coenen, H.H.

2001-01-01

The present work describes two radiosynthetic pathways to prepare homocysteine[ 75 Se]selenolactone 1 starting from n.c.a. [ 75 Se]selenite 2. It was achieved either by alkylation reaction of n.c.a. methyl[ 75 Se]selenide 4 or by hydrolysis of alkylated 1,3-dicyclohexyl[ 75 Se]selenourea 11. N.c.a. methyl[ 75 Se]selenide 4 is available using sulfur as non-isotopic carrier. However, the radiochemical yield of the substitution of 2-tert.-butoxycarbonylamino-4-bromobutyric acid ethylester 5 with n.c.a. methyl-[ 75 Se]selenide is only in the range of 15%-20%. Birch reduction of protected n.c.a. [ 75 Se]selenomethionine 6 formed leads to a RCY of 5%-10% homocysteine[ 75 Se]selenolactone 1. Alternatively, the synthesis of homocysteine[ 75 Se]selenolactone 1 is possible by hydrolysis of the corresponding [ 75 Se]selenouronium salt 11 available by addition of 2-tert.-butoxycarbonylamino-4-bromobutyric acid ethylester 5 to 1,3-dicyclohexyl[ 75 Se]selenourea 10. A method was developed for the synthesis of 1,3-dicyclohexyl[ 75 Se]selenourea 10 by addition of c.a. [ 75 Se]SeH 2 to 1,3-dicyclohexylcarbodiimide, which leads to 20%-30% RCY of c.a. homocysteine[ 75 Se]selenolactone 1. (orig.)

First-principles study of electronic structure of CuSbS{sub 2} and CuSbSe{sub 2} photovoltaic semiconductors

Energy Technology Data Exchange (ETDEWEB)

Maeda, T., E-mail: tmaeda@ad.ryukoku.ac.jp; Wada, T.

2015-05-01

We studied the features of CuSbS{sub 2} (CAS) and CuSbSe{sub 2} (CASe), two proposed photovoltaic compounds, and clarified their electronic structures by first-principles calculations and compared them to the chalcopyrite-type CuInSe{sub 2} results. For both CAS and CASe, the calculated enthalpies of formation of the chalcostibite phases were considerably lower than those of the chalcopyrite phases. Therefore, we considered that the chalcostibite phase is more stable for CAS and CASe. In their band structure calculated with the HSE06 hybrid functional, the valence band maxima of CAS and CASe were located at the Γ-point, and the conduction band minima were located at the R-point. Their second lowest conduction band was located at the Γ-point, whose energy level nearly equaled the R-point. For CAS (CASe), the partial density of the states shows the character of the Cu 3d and S 3p (Se 4p) orbitals at the top of the valence bands and the Sb 5p and S 3p (Se 4p) orbitals at the bottom of the conduction bands. The conduction bands of CAS and CASe have a p-orbital character (Sb 5p) that differs from the s-orbital character (In 5s) of CuInSe{sub 2}. It is for the reason that CAS and CASe do not have a chalcopyrite structure but a chalcostibite-type structure. The calculated absorption coefficient of CuSbS{sub 2} (10{sup 4}-10{sup 5} cm{sup −1}) is comparable to that of CuInSe{sub 2}. - Highlights: • We studied the features of CuSbS{sub 2} and CuSbSe{sub 2}, newly proposed photovoltaic compounds. • Chalcostibite phase is more stable in CuSbS{sub 2} and CuSbSe{sub 2}. • Band structures of CuSbS{sub 2} and CuSbS{sub 2} were calculated with HSE06 hybrid functional. • Absorption coefficient of chalcostibite-type CuSbS{sub 2} is comparable to that of CuInSe{sub 2}.

Ultrafast carrier dynamics in band edge and broad deep defect emission ZnSe nanowires

Science.gov (United States)

Othonos, Andreas; Lioudakis, Emmanouil; Philipose, U.; Ruda, Harry E.

2007-12-01

Ultrafast carrier dynamics of ZnSe nanowires grown under different growth conditions have been studied. Transient absorption measurements reveal the dependence of the competing effects of state filling and photoinduced absorption on the probed energy states. The relaxation of the photogenerated carriers occupying defect states in the stoichiometric and Se-rich samples are single exponentials with time constants of 3-4ps. State filling is the main contribution for probe energies below 1.85eV in the Zn-rich grown sample. This ultrafast carrier dynamics study provides an important insight into the role that intrinsic point defects play in the observed photoluminescence from ZnSe nanowires.

The determination of Se content in Se egg by NAA in MNSR

International Nuclear Information System (INIS)

Wang Ke; Hou Xiaolin

1994-01-01

The selenium contents in the yolk, albumin and shell of the egg which was laid by layer hen fed with various Se concentrations are determined by thermal neutron activation analysis with a nuclear reaction 78 Se(n, γ) 77 Se m on the miniature neutron source reactor (MNSR). The results show that the more the selenium added to the feed, the higher the Se content in the egg and that in the egg constituents, the highest Se content is in the egg yolk and the lowest in the egg albumin

Luminescence spectra of CdSe/ZnSe double layers of quantum dots

Energy Technology Data Exchange (ETDEWEB)

Reznitsky, Alexander; Permogorov, Sergei; Korenev, Vladimir V.; Sedova, Irina; Sorokin, Sergey; Sitnikova, Alla; Ivanov, Sergei [A.F. Ioffe Physico-Technical Institute, Polytekhnicheskaya 26, 194021 St. Petersburg (Russian Federation); Klochikhin, Albert [B.P. Konstantinov Nuclear Physics Institute, St. Petersburg (Russian Federation)

2009-12-15

We have studied the emission spectra and structural properties of double CdSe/ZnSe quantum dot (QD) sheet structures grown by molecular beam epitaxy in order to elucidate the mechanisms of the electronic and strain field interaction between the QD planes. The thickness of the ZnSe barrier separating the CdSe sheets was in the range of 10-60 monolayers (ML) in the set of samples studied. We have found that coupling between dots in adjacent layers becomes relatively strong in CdSe/ZnSe double layers structures with 25-27 ML barrier, while it is rather weak when the barrier thickness exceeds 30 ML. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Browse Title Index

African Journals Online (AJOL)

Vol 1, No 1 (2001), Mise en évidence d'un optimum de fines dans les sables ô béton: Exemple d'un sable des dunes de la région de Dakar ( Sénégal), Abstract. IK Cissé, M ... Vol 12 (2010), Modele electrique d'une pile a combustible « pem » pour utilisation electronique de puissance, Abstract. I Sadli, S Raël, B Davat, ...

Intrinsic point defects in off-stoichiometric Cu2ZnSnSe4: A neutron diffraction study

Science.gov (United States)

Gurieva, Galina; Valle Rios, Laura Elisa; Franz, Alexandra; Whitfield, Pamela; Schorr, Susan

2018-04-01

This work is an experimental study of intrinsic point defects in off-stoichiometric kesterite type CZTSe by means of neutron powder diffraction. We revealed the existence of copper vacancies (VCu), various cation anti site defects (CuZn, ZnCu, ZnSn, SnZn, and CuZn), as well as interstitials (Cui, Zni) in a wide range of off-stoichiometric polycrystalline powder samples synthesized by the solid state reaction. The results show that the point defects present in off-stoichiometric CZTSe agree with the off-stoichiometry type model, assuming certain cation substitutions accounting for charge balance. In addition to the known off-stoichiometry types A-H, new types (I-L) have been introduced. For the very first time, a correlation between the chemical composition of the CZTSe kesterite type phase and the occurring intrinsic point defects is presented. In addition to the off-stoichiometry type specific defects, the Cu/Zn disorder is always present in the CZTSe phase. In Cu-poor/Zn-rich CZTSe, a composition considered as the one that delivers the best photovoltaic performance, mainly copper vacancies, ZnCu and ZnSn anti sites are present. Also, this compositional region shows the lowest degree of Cu/Zn disorder.

Hopping conduction in gamma-irradiated InSe and InSe:Sn single crystals

International Nuclear Information System (INIS)

MUSTAFAEVA, S.N.; ISMAILOV, A.A.; ASADOV, M.M.

2010-01-01

Full text : The semiconductive InSe layer compound is characterized by a strong covalent bond inside the layers and a weak Van der Waals bonding between them. It was shown that across the layers of InSe single crystals at low temperatures (T ≤ 200 K) at direct current (dc) hopping conduction through localized states near the Fermi level takes place. The results of dc-conductivity of gamma-irradiated p-InSe and n-InSe : Sn layer single crystals have been presented in this work. ρ-InSe single crystal specimens grown by the Bridgman method were used in the experiments. Plates of the crystals under study were obtained by cleaving along the layers of single crystal ingots. The single-crystal InSe samples for electric measurements had the form of planar capacitors normal to the C axis of the crystals, with silver-paste electrodes. The thickness of the InSe samples was 300 mkm. Co 60 serves as the source of irradiation with energy of gamma-quantum equal to 1.3 MeV. The electric properties of non-irradiated and gamma-irradiated InSe crystals were measured under the same conditions. It is revealed that InSe and InSe : Sn (0.2 and 0.4 mole percent Sn) single crystals exhibit a variable range hopping conduction along a normal to their natural layers at temperatures T≤200 K in a dc electric field. From experimental data the parameters of localized states of p-InSe and n-InSe : Sn were calculated before and after gamma-irradiation. It is revealed that gamma-irradiation of p-InSe and n-InSe : Sn (0.2 and 0.4 mole percent Sn) single crystals leads to significant change of localized states parameters. After gamma-irradiation the density of states near the Fermi level increased, but their energy spread and the average jump distance decreased. The concentrations of radiated defects were estimated in p-InSe (5.18*10 1 7 sm - 3) and n-InSe : Sn (2.5*10 1 7 - 2.7*10 1 8 sm - 3) single crystals. The present results demonstrate that gamma-irradiation offers the possibility of tuning

Structure of Se-rich As-Se glasses by high-resolution x-ray photoelectron spectroscopy

International Nuclear Information System (INIS)

Golovchak, R.; Kovalskiy, A.; Miller, A. C.; Jain, H.; Shpotyuk, O.

2007-01-01

To establish the validity of various proposed structural models, we have investigated the structure of the binary As x Se 100-x chalcogenide glass family (x≤40) by high-resolution x-ray photoelectron spectroscopy. From the composition dependence of the valence band, the contributions to the density of states from the 4p lone pair electrons of Se and the 4p bonding states and 4s electrons of Se and As are identified in the top part of the band. The analysis of Se 3d and As 3d core-level spectra supports the so-called chain crossing model for the atomic structure of Se-rich As x Se 100-x bulk glasses. The results also indicate small deviations (∼3-8%) from this model, especially for glass compositions with short Se chains (25 40 Se 60 and of Se-Se-Se fragments in a glass with composition x=30 is established

Phase diagram of SnTe-CdSe cross-section of SnTe+CdSe reversible SnSe+CdTe ternary reciprocal system

International Nuclear Information System (INIS)

Dubrovin, I.V.; Budennaya, L.D.; Mizetskaya, I.B.; Sharkina, Eh.V.

1986-01-01

Phase equilibrium diagram of SnTe-CdSe cross-section of Sn, Cd long Te, Se ternary reciprocal system is investigated using the methods of differential thermal, X-ray phase, and microstructural analyses. Maximum length of solid solutions on the base of SnTe corresponds to approximately 14 mol.% at 1050 K and approximately 3 mol.% of CdSe at 670 K. Region of solid solutions on the base of CdSe corresponds to less than 1 mol.% of SnTe at room temperature. SnTe-CdSe cross-section is not a quasibinar one. Equilibrium is shifted to the left in the SnTe+CdSe reversible SnSe+CdTe reciprocal system

Behaviour of nonlinear dynamic susceptibility above the Curie point in the cubic ferromagnetics CdCr2S4 and CdCr2Se4

International Nuclear Information System (INIS)

Luzyanin, I.D.; Khavronin, V.P.

1984-01-01

Results are presented of an experimental investigation of the behaviour of the nonlinear dynamic susceptibility in the phase transition region the cubic, weakly anisotropic ferromagnetics CdCr 2 S 4 and CdCr 2 Se 4 . It is shown that above the Curie point Tsub(C) two temperature regions, a scaling and anomalous, can be distinguished which involve critical phenomena of different nature. In the scaling region which corresponds to 4πchisub(0)) < or approximately 25, the behaviour found for the linear and nonlinear susceptibilities are in satisfactory agreement with the theoretical predictions based on similarity considerations. The anomalous region is directly adjacent to Tsub(C). In this region phenomena are observed which are not consistent with current concepts regarding the nature of second order phase transitions e.g. hysteresis with respect to magnetic field, a ''residual'' second order signal which persists a long time after switching off of the external stationary field and an anomalous behavioUr of the susceptibility at low frequencies. The resemblence of the phenomena observed in the anomalous region with those occurring in spin glasses is noted

Highly photoluminescent and photostable CdSe quantum dot-nylon hybrid composites for efficient light conversion applications

Energy Technology Data Exchange (ETDEWEB)

Yuan Ying; Riehle, Frank-Stefan [Freiburg Materials Research Centre (FMF), University of Freiburg, Stefan-Meier-Str. 21, D-79104 Freiburg (Germany); Department of Microsystems Engineering (IMTEK), Georg Koehler Allee 103, University of Freiburg, D-79110 Freiburg (Germany); Nitschke, Roland [Life Imaging Center, Centre of Systems Biology, University of Freiburg Habsburgerstr. 49, D-79104 Freiburg (Germany); Centre for Biological Signalling Studies (BIOSS), University of Freiburg (Germany); Krueger, Michael, E-mail: michael.krueger@fmf.uni-freiburg.de [Freiburg Materials Research Centre (FMF), University of Freiburg, Stefan-Meier-Str. 21, D-79104 Freiburg (Germany); Department of Microsystems Engineering (IMTEK), Georg Koehler Allee 103, University of Freiburg, D-79110 Freiburg (Germany)

2012-02-15

Highlights: Black-Right-Pointing-Pointer A novel in situ synthesis approach for highly luminescent CdSe core QDs-nylon hybrid materials. Black-Right-Pointing-Pointer Potential applications for light and energy conversion are demonstrated. Black-Right-Pointing-Pointer Three dimensional structures out of this hybrid material are available. - Abstract: Highly photoluminescent hexadecylamine (HDA) capped core CdSe quantum dots (QDs) with fluorescent quantum yields (QYs) up to 60% were synthesized using a hot injection method and directly incorporated into nylon polymer. For the incorporation of crude CdSe QDs into nylon a simple reproducible and upscalable one pot approach was developed without the need of further purification steps. The photoluminescence (PL) properties of the core QDs and the resulting QD-polymer hybrid composites were investigated and compared. Red emitting hybrid materials exhibit a QY of 60% with a high potential for applications in direct light and energy conversion. The hybrid materials could be successfully utilized as LED conversion layers. By avoiding exposure to oxygen the hybrid films can be kept for a month without detecting a significant decrease in luminescence. Various three dimensional structures are easily available opening doors for further applications such as novel materials for fluorescence standard development in laser scanning microscopy (LSM).

La lectura en el aula. Qué se hace, qué se debe hacer y qué se puede hacer

OpenAIRE

Pablo Lorente Muñoz

2011-01-01

Emilio Sánchez Miguel (Coord.). La lectura en el aula. Qué se hace, qué se debe hacer y qué se puede hacer. Graó, col. Crítica y Fundamentos, 27. Barcelona, 2010. 382 págs. ISBN: 978-84-7827-892-3

SE-VYZ

International Nuclear Information System (INIS)

Anon

2004-01-01

On this CD compact disc 6 video-films (A-1 NPP; Bituminization; Cementation; Pressing; The Interim spent fuel storage facility; Transport into the National radioactive waste repository Mochovce; Ignition; and Vitrification). In these films process of radioactive waste treatment in the Bohunice Radioactive Waste Processing Center (SE-VYZ) is presented. 2 presentations about radioactive wastes treatment in the SE-VYZ are included

Speciation of Se and DOC in soil solution and their relation to Se bioavailability.

Science.gov (United States)

Weng, Liping; Vega, Flora Alonso; Supriatin, Supriatin; Bussink, Wim; Van Riemsdijk, Willem H

2011-01-01

A 0.01 M CaCl(2) extraction is often used to asses the bioavailability of plant nutrients in soils. However, almost no correlation was found between selenium (Se) in the soil extraction and Se content in grass. The recently developed anion Donnan membrane technique was used to analyze chemical speciation of Se in the 0.01 M CaCl(2) extractions of grassland soils and fractionation of DOC (dissolved organic carbon). The results show that most of Se (67-86%) in the extractions (15 samples) are colloidal-sized Se. Only 13-34% of extractable Se are selenate, selenite and small organic Se (<1 nm). Colloidal Se is, most likely, Se bound to or incorporated in colloidal-sized organic matter. The dominant form of small Se compounds (selenate, selenite/small organic compounds) depends on soil. A total of 47-85% of DOC is colloidal-sized and 15-53% are small organic molecules (<1 nm). In combination with soluble S (sulfur) and/or P (phosphor), concentration of small DOC can explain most of the variability of Se content in grass. The results indicate that mineralization of organic Se is the most important factor that controls Se availability in soils. Competition with sulfate and phosphate needs to be taken into account. Further research is needed to verify if concentration of small DOC is a good indicator of mineralization of soil organic matter.

One-pot synthesis of hollow NiSe-CoSe nanoparticles with improved performance for hybrid supercapacitors

Science.gov (United States)

Chen, Haichao; Fan, Meiqiang; Li, Chao; Tian, Guanglei; Lv, Chunju; Chen, Da; Shu, Kangying; Jiang, Jianjun

2016-10-01

Hollow NiSe-CoSe samples have been synthesized for the first time via a one-pot solvothermal approach. The strategy is robust enough to synthesize NiSe-CoSe nanoparticles with different NiSe to CoSe ratios but with a similar hollow structure. Co ions in the NiSe-CoSe nanoparticles play decisive role for formation of the hollow structure; otherwise, the nanoparticles become solid for the NiSe sample. When used as the positive electroactive materials for energy storage, the NiSe-CoSe samples show excellent electrochemical activity in alkaline electrolyte. Using the synergistic effect between NiSe and CoSe, the electrochemical performance of NiSe-CoSe can be tuned by varying the NiSe to CoSe ratios. The NiSe-CoSe sample with a NiSe to CoSe ratio of 4:2 shows the best electrochemical performance in terms of superior specific capacity, improved rate capability and excellent cycling stability. In addition, the electrochemical performance of NiSe-CoSe sample with a NiSe to CoSe ratio of 4:2 is also evaluated via assembling hybrid supercapacitors with RGO, and the hybrid supercapacitor delivers both high power and energy densities (41.8 Wh kg-1 at 750 W kg-1 and 20.3 Wh kg-1 at 30 kW kg-1).

Routes to High-Temperature Superconductivity: A Lesson from FeSe/SrTiO3

Science.gov (United States)

Lee, Dung-Hai

2018-03-01

Raising the superconducting transition temperature to a point where applications are practical is one of the most important challenges in science. In this review, we aim at gaining insights on the Tc controlling factors for a particular high-temperature superconductor family - the FeSe-based superconductors. In particular, we discuss the mechanisms by which the Cooper pairing temperature is enhanced from ˜8 K in bulk FeSe to ˜80 K in the interface between an atomic layer of FeSe and SrTiO3. This includes the experimental hints and the theoretical simulation of the involved mechanisms. We end by applying these insights to suggest some possible high-temperature superconducting systems.

Excitons, biexcitons, and phonons in ultrathin CdSe/ZnSe quantum structures

DEFF Research Database (Denmark)

Gindele, F.; Woggon, Ulrike; Langbein, Wolfgang Werner

1999-01-01

The optical properties of CdSe nanostructures grown by migration-enhanced epitaxy of CdSe on ZnSe are studied by time-, energy-, and temperature-dependent photoluminescence and excitation spectroscopy, as well as by polarization-dependent four-wave mixing and two-photon absorption experiments...

Gate-Defined Quantum Confinement in InSe-based van der Waals Heterostructures.

Science.gov (United States)

Hamer, Matthew J; Tóvári, Endre; Zhu, Mengjian; Thompson, Michael Dermot; Mayorov, Alexander S; Prance, Jonathan; Lee, Yongjin; Haley, Richard; Kudrynskyi, Zakhar R; Patanè, Amalia; Terry, Daniel; Kovalyuk, Zakhar D; Ensslin, Klaus; Kretinin, Andrey V; Geim, Andre K; Gorbachev, Roman Vladislavovich

2018-05-15

Indium selenide, a post-transition metal chalcogenide, is a novel two-dimensional (2D) semiconductor with interesting electronic properties. Its tunable band gap and high electron mobility have already attracted considerable research interest. Here we demonstrate strong quantum confinement and manipulation of single electrons in devices made from few-layer crystals of InSe using electrostatic gating. We report on gate-controlled quantum dots in the Coulomb blockade regime as well as one-dimensional quantization in point contacts, revealing multiple plateaus. The work represents an important milestone in the development of quality devices based on 2D materials and makes InSe a prime candidate for relevant electronic and optoelectronic applications.

Improved photoluminescence quantum yield and stability of CdSe-TOP, CdSe-ODA-TOPO, CdSe/CdS and CdSe/EP nanocomposites

Science.gov (United States)

Wei, Shutian; Zhu, Zhilin; Wang, Zhixiao; Wei, Gugangfen; Wang, Pingjian; Li, Hai; Hua, Zhen; Lin, Zhonghai

2016-07-01

Size-controllable monodisperse CdSe nanocrystals with different organic capping were prepared based on the hot-injection method. The effective separation of nucleation and growth was achieved by rapidly mixing two highly reactive precursors. As a contrast, we prepared CdSe/CdS nanocrystals (NCs) successfully based on the selective ion layer adsorption and reaction (SILAR) technique. This inorganic capping obtained higher photoluminescence quantum yield (PLQY) of 59.3% compared with organic capping of 40.8%. Furthermore, the CdSe-epoxy resin (EP) composites were prepared by adopting a flexible ex situ method, and showed excellent stability in the ambient environment for one year. So the composites with both high PLQY of nanocrystals and excellent stability are very promising to device application.

Recombination luminescence and trap levels in undoped and Al-doped ZnO thin films on quartz and GaSe (0 0 0 1) substrates

Energy Technology Data Exchange (ETDEWEB)

Evtodiev, I. [Moldova State University, 60 A. Mateevici Str., Chisinau, MD 2009, Republic of Moldova (Moldova, Republic of); Caraman, I. [Vasile Alecsandri University of Bacau, 157 Calea Marasesti, RO 600115 Bacau (Romania); Leontie, L., E-mail: lleontie@uaic.ro [Alexandru Ioan Cuza University of Iasi, Bd. Carol I, Nr. 11, RO 700506 Iasi (Romania); Rusu, D.-I. [Vasile Alecsandri University of Bacau, 157 Calea Marasesti, RO 600115 Bacau (Romania); Dafinei, A. [Faculty of Physics, University of Bucharest, Platforma Magurele, Str. Fizicienilor nr. 1, CP Mg - 11, Bucharest-Magurele, RO 76900 (Romania); Nedeff, V.; Lazar, G. [Vasile Alecsandri University of Bacau, 157 Calea Marasesti, RO 600115 Bacau (Romania)

2012-03-15

Highlights: Black-Right-Pointing-Pointer ZnO films on GaSe create electron trapping states and PL recombination levels. Black-Right-Pointing-Pointer Zn and Al diffusion in GaSe produces low-energy widening of its PL emission. Black-Right-Pointing-Pointer ZnO:Al films on GaSe lamellas are suitable for gas-discharge lamp applications. -- Abstract: Photoluminescence spectra of ZnO and ZnO:Al (1.00, 2.00 and 5.00 at.%) films on GaSe (0 0 0 1) lamellas and amorphous quartz substrates, obtained by annealing, at 700 K, of undoped and Al-doped metal films, are investigated. For all samples, the nonequilibrium charge carriers recombine by radiative band-to-band transitions with energy of 3.27 eV, via recombination levels created by the monoionized oxygen atoms, forming the impurity band laying in the region 2.00 - 2.70 eV. Al doping induces an additional recombination level at 1.13 eV above the top of the valence band of ZnO films on GaSe substrates. As a result of thermal diffusion of Zn and Al into the GaSe interface layer from ZnO:Al/GaSe heterojunction, electron trap levels located at 0.22 eV and 0.26 eV below the conduction band edge of GaSe, as well as a deep recombination level, responsible for the luminescent emission in the region 1.10 - 1.40 eV, are created.

Thermoelectric transport of Se-rich Ag2Se in normal phases and phase transitions

International Nuclear Information System (INIS)

Mi, Wenlong; Lv, Yanhong; Qiu, Pengfei; Shi, Xun; Chen, Lidong; Zhang, Tiansong

2014-01-01

Small amount of Se atoms are used to tune the carrier concentrations (n H ) and electrical transport in Ag 2 Se. Significant enhancements in power factor and thermoelectric figure of merit (zT) are observed in the compositions of Ag 2 Se 1.06 and Ag 2 Se 1.08 . The excessive Se atoms do not change the intrinsically electron-conducting character in Ag 2 Se. The detailed analysis reveals the experiment optimum carrier concentration in Ag 2 Se is around 5 × 10 18  cm −3 . We also investigate the temperature of maximum zT and the thermoelectric transport during the first order phase transitions using the recently developed measurement system

Hydrogen effects on deep level defects in proton implanted Cu(In,Ga)Se{sub 2} based thin films

Energy Technology Data Exchange (ETDEWEB)

Lee, D.W.; Seol, M.S.; Kwak, D.W.; Oh, J.S. [Department of Physics, Dongguk University, Seoul 100-715 (Korea, Republic of); Jeong, J.H. [Photo-electronic Hybrids Research Center, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Cho, H.Y., E-mail: hycho@dongguk.edu [Department of Physics, Dongguk University, Seoul 100-715 (Korea, Republic of)

2012-08-01

Hydrogen effects on deep level defects and a defect generation in proton implanted Cu(In,Ga)Se{sub 2} (CIGS) based thin films for solar cell were investigated. CIGS films with a thickness of 3 {mu}m were grown on a soda-lime glass substrate by a co-evaporation method, and then were implanted with protons. To study deep level defects in the proton implanted CIGS films, deep level transient spectroscopy measurements on the CIGS-based solar cells were carried out, these measurements found 6 traps (including 3 hole traps and 3 electron traps). In the proton implanted CIGS films, the deep level defects, which are attributed to the recombination centers of the CIGS solar cell, were significantly reduced in intensity, while a deep level defect was generated around 0.28 eV above the valence band maximum. Therefore, we suggest that most deep level defects in CIGS films can be controlled by hydrogen effects. - Highlights: Black-Right-Pointing-Pointer Proton implanted Cu(In,Ga)Se{sub 2} thin film and solar cell are prepared. Black-Right-Pointing-Pointer Deep level defects of Cu(In,Ga)Se{sub 2} thin film and solar cell are investigated. Black-Right-Pointing-Pointer Hydrogenation using proton implantation and H{sub 2} annealing reduces deep level defects. Black-Right-Pointing-Pointer Hydrogenation could enhance electrical properties and efficiency of solar cells.

Contenha-se, se for capaz

Directory of Open Access Journals (Sweden)

Mirna Feitoza Pereira

2008-11-01

Full Text Available Em O Instinto da Linguagem, Steven Pinker discorre sobre sua célebre tese: a linguagem não é a mais prodigiosa invenção cultural humana. Ela é uma peça da constituição biológica do cérebro. A linguagem é uma habilidade complexa e especializada, que se desenvolve espontaneamente na criança, sem qualquer esforço consciente ou instrução formal, que se manifesta sem que se perceba sua lógica subjacente, que é qualitativamente a mesma em todo indiví­duo, e que difere de capacidades mais gerais de processamento de informações ou de comportamento inteligente. Para Pinker, a concepção de linguagem como um tipo de instinto transmite a idéia de que as pessoas sabem falar mais ou menos da mesma maneira que as aranhas sabem tecer suas teias. Ele apóia suas idéias em Darwin e Chomsky. Palavras-chave linguagem, gramática universal, evolução Abstract In Language Instinct, Steven Pinker argues about his famous thesis: language is not the most prodigious human cultural invention. It is a distinct piece of the biological constitution of the brain. Language is a complex, specialized skill, which develops spontaneously in the child, without conscious effort or formal instruction. It reveals itself without awareness of its underlying logic, which is qualitatively the same in every individual, and which is distinct from more general abilities of information processing of intelligent behavior. According to Pinker, the conception of language as a kind of instinct conveys the idea that people know how to talk in more or less the same way as spiders know how to spin webs. His thesis is founded in Darwin and Chomsky-s theories. Keywords language, universal grammar, evolution

Representation of the Saharan atmospheric boundary layer in the Weather and Research Forecast (WRF) model: A sensitivity analysis.

Science.gov (United States)

Todd, Martin; Cavazos, Carolina; Wang, Yi

2013-04-01

The Saharan atmospheric boundary layer (SABL) during summer is one of the deepest on Earth, and is crucial in controlling the vertical redistribution and long-range transport of dust in the Sahara. The SABL is typically made up of an actively growing convective layer driven by high sensible heating at the surface, with a deep, near-neutrally stratified Saharan residual layer (SRL) above it, which is mostly well mixed in humidity and temperature and reaches a height of ˜5-6km. These two layers are usually separated by a weak (≤1K) temperature inversion. Model representation of the SPBL structure and evolution is important for accurate weather/climate and aerosol prediction. In this work, we evaluate model performance of the Weather Research and Forecasting (WRF) to represent key multi-scale processes in the SABL during summer 2011, including depiction of the diurnal cycle. For this purpose, a sensitivity analysis is performed to examine the performance of seven PBL schemes (YSU, MYJ, QNSE, MYNN, ACM, Boulac and MRF) and two land-surface model (Noah and RUC) schemes. In addition, the sensitivity to the choice of lateral boundary conditions (ERA-Interim and NCEP) and land use classification maps (USGS and MODIS-based) is tested. Model outputs were confronted upper-air and surface observations from the Fennec super-site at Bordj Moktar and automatic weather station (AWS) in Southern Algeria Vertical profiles of wind speed, potential temperature and water vapour mixing ratio were examined to diagnose differences in PBL heights and model efficacy to reproduce the diurnal cycle of the SABL. We find that the structure of the model SABL is most sensitive the choice of land surface model and lateral boundary conditions and relatively insensitive to the PBL scheme. Overall the model represents well the diurnal cycle in the structure of the SABL. Consistent model biases include (i) a moist (1-2 gkg-1) and slightly cool (~1K) bias in the daytime convective boundary layer (ii

Electric field modulation of Schottky barrier height in graphene/MoSe2 van der Waals heterointerface

International Nuclear Information System (INIS)

Sata, Yohta; Moriya, Rai; Morikawa, Sei; Yabuki, Naoto; Masubuchi, Satoru; Machida, Tomoki

2015-01-01

We demonstrate a vertical field-effect transistor based on a graphene/MoSe 2 van der Waals (vdW) heterostructure. The vdW interface between the graphene and MoSe 2 exhibits a Schottky barrier with an ideality factor of around 1.3, suggesting a high-quality interface. Owing to the low density of states in graphene, the position of the Fermi level in the graphene can be strongly modulated by an external electric field. Therefore, the Schottky barrier height at the graphene/MoSe 2 vdW interface is also modulated. We demonstrate a large current ON-OFF ratio of 10 5 . These results point to the potential high performance of the graphene/MoSe 2 vdW heterostructure for electronics applications

EPR of SeO2- and SeO3- radicals in alkaline borate glasses with 77Se isotope

International Nuclear Information System (INIS)

Galimov, D.G.; Tarzimanov, K.D.

1977-01-01

Alkaline borate glasses with 77 Se were investigated in order to establish the nature of selenium compounds and radicals in glasses. The relationship between alkali ions and the oxygen radical of selenium was determined by decoding the hyperfine structure of the alkaline borate glass EPR spectra obtained before and after γ-irradiation. The irradiated and non-irradiated glasses were characterized by hyperfine splitting of the EPR lines from the α- and β centres. Moreover, the irradiated samples were noted to have a line doublet (signal phi). With intenser reduction conditions of glass fusion, the intensities of α, β, and phi signals were noted to decline. This confirmes the suggestion that these centres were caused by oxygen compouds. The authors concluded that α and β signals were due to the paramagnetic centres of SeO 2 - and [SeO 2 - ]R + , and phi signal to the SeO 3 - radicals

Intermolecular and very strong intramolecular C-SeO/N chalcogen bonds in nitrophenyl selenocyanate crystals.

Science.gov (United States)

Wang, Hui; Liu, Ju; Wang, Weizhou

2018-02-14

Single-crystal X-ray diffraction reveals that polymorphic ortho-nitrophenyl selenocyanate (o-NSC, crystals 1a and 1b) and monomorphic para-nitrophenyl selenocyanate (p-NSC, crystal 2) crystals are all stabilized mainly by intermolecular and very strong intramolecular C-SeO/N chalcogen bonds, as well as by other different interactions. Thermogravimetric (TG) and differential scanning calorimetry thermogram (DSC) analyses show that the starting decomposition temperatures and melting points of the three crystals are different, following the order 1b > 1a > 2, which is consistent with the structural characteristics of the crystals. In addition, atoms in molecules (AIM) and natural bond orbital (NBO) analyses indicate that the total strengths of the C-SeO and C-SeN chalcogen bonds decrease in the order 1b > 1a > 2. This study could be significant for engineering functional crystals based on robust C-SeO and C-SeN chalcogen bonds, and for designing drugs containing selenium as well as understanding their interaction in biosystems.

Se-Se isoelectronic centers in high purity CdTe

Energy Technology Data Exchange (ETDEWEB)

Najjar, Rita; Andre, Regis; Mariette, Henri [CEA-CNRS, Nanophysique et Semiconducteurs, Institut Neel, 25 rue des martyrs, 38042 Grenoble (France); Golnik, Andrzej; Kossacki, Piotr; Gaj, Jan A. [Institute of Experimental Physics, University of Warsaw, Hoza 69, 00-681 Warsaw (Poland)

2010-06-15

We evidence zero-dimensional exciton states trapped on isoelectronic Se centers in CdTe quantum wells, {delta}-doped with Se. Thanks to special precautions taken to have very high purity CdTe heterostructures, it is possible to observe, in photoluminescence spectra, sharp discrete lines arising from individual centers related to the Se doping. These emission lines appear at about 40 meV below the CdTe band gap energy. The most prominent lines are attributed to the recombination of excitons bound to nearest-neighbor selenium pairs in a tetrahedral CdTe environment. This assignment is confirmed by a common linear polarization direction of the emitted light, parallel to <110>. These excitons localized on individual isoelectronic traps are good candidates as single photon emitters (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Quantum chemistry of the minimal CdSe clusters

Science.gov (United States)

Yang, Ping; Tretiak, Sergei; Masunov, Artëm E.; Ivanov, Sergei

2008-08-01

Colloidal quantum dots are semiconductor nanocrystals (NCs) which have stimulated a great deal of research and have attracted technical interest in recent years due to their chemical stability and the tunability of photophysical properties. While internal structure of large quantum dots is similar to bulk, their surface structure and passivating role of capping ligands (surfactants) are not fully understood to date. We apply ab initio wavefunction methods, density functional theory, and semiempirical approaches to study the passivation effects of substituted phosphine and amine ligands on the minimal cluster Cd2Se2, which is also used to benchmark different computational methods versus high level ab initio techniques. Full geometry optimization of Cd2Se2 at different theory levels and ligand coverage is used to understand the affinities of various ligands and the impact of ligands on cluster structure. Most possible bonding patterns between ligands and surface Cd/Se atoms are considered, including a ligand coordinated to Se atoms. The degree of passivation of Cd and Se atoms (one or two ligands attached to one atom) is also studied. The results suggest that B3LYP/LANL2DZ level of theory is appropriate for the system modeling, whereas frequently used semiempirical methods (such as AM1 and PM3) produce unphysical results. The use of hydrogen atom for modeling of the cluster passivating ligands is found to yield unphysical results as well. Hence, the surface termination of II-VI semiconductor NCs with hydrogen atoms often used in computational models should probably be avoided. Basis set superposition error, zero-point energy, and thermal corrections, as well as solvent effects simulated with polarized continuum model are found to produce minor variations on the ligand binding energies. The effects of Cd-Se complex structure on both the electronic band gap (highest occupied molecular orbital-lowest unoccupied molecular orbital energy difference) and ligand binding

Sample Set (SE): SE30 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE30 Comparison of seed metabolites among soybean varieties Investigation of Glycine max. green seed metabol...ites. 3 varieties (Kamogawashichiri, Koitozairai, Tanbakuro) data are examined. Tak

Sample Set (SE): SE13 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE13 Comparison of leaf metabolites among spinach varieties Investigation of Spinacia oleracea leaf metaboli...tes. 4 cultivers (Nihon, Kanaji, Kurohaminstarland and Wasesaradaakari) and 3 repli

First-principles study of defect formation in a photovoltaic semiconductor Cu2ZnGeSe4

Science.gov (United States)

Nishihara, Hironori; Maeda, Tsuyoshi; Wada, Takahiro

2018-02-01

The formation energies of neutral Cu, Zn, Ge, and Se vacancies in kesterite-type Cu2ZnGeSe4 were evaluated by first-principles pseudopotential calculations using plane-wave basis functions. The calculations were performed at typical points in Cu-(Zn1/2Ge1/2)-Se and Cu3Se2-ZnSe-GeSe2 pseudoternary phase diagrams for Cu2ZnGeSe4. The results were compared with those for Cu2ZnSnSe4, Cu2ZnGeS4, and Cu2ZnSnS4 calculated using the same version of the CASTEP program code. The results indicate that Cu vacancies are easily formed in Cu2ZnGeSe4 under the Cu-poor condition as in the above compounds and CuInSe2, suggesting that Cu2ZnGeSe4 is also a preferable p-type absorber material for thin-film solar cells. The formation energies of possible antisite defects, such as CuZn and CuGe, and of possible complex defects, such as CuZn+ZnCu, were also calculated and compared within the above materials. The antisite defect of CuZn, which has the smallest formation energy within the possible defects, is concluded to be the most hardly formed in Cu2ZnGeSe4 among the compounds.

Influence of CdSe layer air-baking on physical properties of CdSe-As2Se3 heterostructures

International Nuclear Information System (INIS)

Schauer, F.; Heza, S.; Kosek, F.; Cimpl, Z.

1980-01-01

An investigation is made of the influence of the air-baking time on the physical properties of a CdSe layer, which is a part of the heterogeneous structure CdSe-As 2 Se 3 used as a camera tube target. The I-U characteristics, C-U characteristics, the dependence of both the real and imaginary part admittance on frequency, and the photoconductance characteristics are measured. All measurements are carried out on heterostructures prepared with variable air-baking time of the CdSe layer: t =0, 5, 15, 40, and 120 min. The results of measurements contribute to the finding of the optimal production procedure with a minimum baking time of tsub(min) = 15 min. The heterostructures exhibit satisfactory properties. The dark current Isub(d)(U =1 V, T = 300 K) = 10 -10 Acm -2 with a rectification factor g(U = 10 V) = 10 6 and a capacitance C (2 kHz) = 2900 pFcm -2 . (author)

ZnSe MSM photodetectors prepared on GaAs and ZnSe substrates

International Nuclear Information System (INIS)

Lin, T.K.; Chang, S.J.; Su, Y.K.; Chiou, Y.Z.; Wang, C.K.; Chang, S.P.; Chang, C.M.; Tang, J.J.; Huang, B.R.

2005-01-01

Homoepitaxial and heteroepitaxial ZnSe metal-semiconductor-metal (MSM) photodetectors were both fabricated and characterized. It was found that homoepitaxial ZnSe MSM photodetector could provide us smaller dark current and large photocurrent. With an incident wavelength of 448 nm, it was found that the maximum responsivities for the homoepitaxial and heteroepitaxial ZnSe photodetectors were 0.128 and 0.045 A/W, which corresponds to a quantum efficiency of 36 and 12%, respectively. Furthermore, it was found that we achieved the minimum noise equivalent power (NEP) of 7.6 x 10 -13 W and the maximum normalized detectivity (D *) of 9.3 x 10 11 cm Hz 0.5 W -1 from our homoepitaxial ZnSe photodetector. In contrast, NEP and D * of the heteroepitaxial ZnSe photodetector were 2.9 x 10 -12 W and 2.44 x 10 11 cm Hz 0.5 W -1 , respectively

SE PREVENINDO?

Directory of Open Access Journals (Sweden)

Ana Débora Assis Moura

2010-01-01

Full Text Available Este estudio tuvo como objetivo verificar el comportamiento de las prostitutas en relación a la prevención de enfermedades de transmisión sexual y del Síndrome de Inmunodeficiencia Adquirida-SIDA, así como investigar cómo se previenen de esas enfermedades. Se trata de una investigación exploratoria, con enfoque cualitativo, llevada a cabo en la Asociación de las Prostitutas en Ceará, Brazil, en septiembre de 2008, a través de una encuesta con 25 prostitutas. El análisis de los datos se hizo según el análisis de contenido, después de ser agrupados en cuatro categorías: conocimiento sobre las enfermedades de transmisión sexual/SIDA; convivencia con la(s enfermedad(es; prevención de la enfermedad de transmisión sexual/SIDA; y el uso de drogas. Se concluyó que las prostitutas no usan preservativos en todas las relaciones sexuales, por lo tanto, las enfermedades de transmisión sexual representan una realidad; la desinformación sobre la(s enfermedad(es es notable; el consumo de drogas lícitas e ilícitas es frecuente entre ellas, factor que las expone a situaciones más vulnerables con relación al VIH/SIDA.

Phonon spectrum of single-crystalline FeSe probed by high-resolution electron energy-loss spectroscopy

Science.gov (United States)

Zakeri, Khalil; Engelhardt, Tobias; Le Tacon, Matthieu; Wolf, Thomas

2018-06-01

Utilizing high-resolution electron energy-loss spectroscopy (HREELS) we measure the phonon frequencies of β-FeSe(001), cleaved under ultra-high vacuum conditions. At the zone center (Γ bar-point) three prominent loss features are observed at loss energies of about ≃ 20.5 and 25.6 and 40 meV. Based on the scattering selection rules we assign the observed loss features to the A1g, B1g, and A2u phonon modes of β-FeSe(001). The experimentally measured phonon frequencies do not agree with the results of density functional based calculations in which a nonmagnetic, a checkerboard or a strip antiferromagnetic order is assumed for β-FeSe(001). Our measurements suggest that, similar to the other Fe-based materials, magnetism has a profound impact on the lattice dynamics of β-FeSe(001).

Hot exciton relaxation in multiple layers CdSe/ZnSe self-assembled quantum dots separated by thick ZnSe barriers

International Nuclear Information System (INIS)

Eremenko, M; Budkin, G; Reznitsky, A

2015-01-01

We have studied PL and PLE spectra of two samples (A and B) of MBE grown CdSe/ZnSe asymmetric double quantum wells with different amount of deposited CdSe layers separated by 14 nm ZnSe barrier. It has been found that PLE spectra of the states forming short wavelength side of the PL spectra of both deep and shallow QWs of the sample A as well as that of deep QW of the sample B demonstrate oscillating structure in the spectral ranges corresponding to exciton states of self-assembled quantum dots only. Meanwhile PLE spectra of the short wavelength states of shallow QW the sample B revealed pronounced oscillating structure with energy period of ZnSe LO phonon under excitation with photons in a wide energy range both in the regions of quantum-dot states and in that of free states in the ZnSe barrier. In these spectra creating of excitons with kinetic energies more than 0.3 eV was observed which considerably exceed the exciton binding energy as well as LO phonon energy (both appr. 0.03 eV). It has been concluded that oscillating structure of the PLE spectra arises due to cascade relaxation of hot excitons. We discuss the model which explains these experimental findings. (paper)

Hot exciton relaxation in multiple layers CdSe/ZnSe self-assembled quantum dots separated by thick ZnSe barriers

Science.gov (United States)

Eremenko, M.; Budkin, G.; Reznitsky, A.

2015-11-01

We have studied PL and PLE spectra of two samples (A and B) of MBE grown CdSe/ZnSe asymmetric double quantum wells with different amount of deposited CdSe layers separated by 14 nm ZnSe barrier. It has been found that PLE spectra of the states forming short wavelength side of the PL spectra of both deep and shallow QWs of the sample A as well as that of deep QW of the sample B demonstrate oscillating structure in the spectral ranges corresponding to exciton states of self-assembled quantum dots only. Meanwhile PLE spectra of the short wavelength states of shallow QW the sample B revealed pronounced oscillating structure with energy period of ZnSe LO phonon under excitation with photons in a wide energy range both in the regions of quantum-dot states and in that of free states in the ZnSe barrier. In these spectra creating of excitons with kinetic energies more than 0.3 eV was observed which considerably exceed the exciton binding energy as well as LO phonon energy (both appr. 0.03 eV). It has been concluded that oscillating structure of the PLE spectra arises due to cascade relaxation of hot excitons. We discuss the model which explains these experimental findings.

The use of population viability analysis to identify possible factors contributing to the decline of a rare ungulate population in south-eastern Zimbabwe

Directory of Open Access Journals (Sweden)

Simon D. Capon

2013-02-01

Full Text Available Populations that are vulnerable to decline are of particular concern to wildlife managers and uncovering the mechanisms responsible for downward trends is a crucial step towards developing future viable populations. The aims of this study were to better understand the mechanisms behind the historic decline of the sable antelope, Hippotragus niger, population at the Malilangwe Wildlife Reserve (MWR, to assess its future viability and to use this analysis to determine key areas of breakdown in population growth and link these to potential limiting factors. VORTEX, a population viability model was used to assess the future viability of the sable antelope population and a sensitivity analysis was applied to identify the key areas of breakdown in growth. The sable population is currently viable, but remains highly vulnerable to changes in adult female survival, a factor which had the greatest influence on overall population fitness. Lion predation, impacting on the adult segment of the population, appeared to be the main factor responsible for the historic decline at the MWR.Conservation implications: Sable generally occur at low densities in the lowveld region of Zimbabwe and, as such, populations are vulnerable to increases in mortality rates. The role of lions in driving the decline at the MWR suggests a need to control their numbers and develop prey refuges through improved management of artificial water.

East coast development overview : why now?

International Nuclear Information System (INIS)

Anderson, J.

1998-01-01

Progress achieved in developing East coast natural gas markets was discussed. Mobil, Shell, Imperial, Mosbacher and Nova Scotia Resources received the go-ahead for the Sable Offshore Energy Project last December. The owner companies created Sable Offshore Energy Inc. (SOE Inc.) for managing and operating the development. Mobil (which has 50 per cent of the total invested in the Sable offshore project) and their partners will spend an average of one million dollars per day in Nova Scotia over the next 22 months in order to ensure that they will deliver gas from the offshore site by late 1999. That is in addition to the 400 million dollars already spent by the consortium in the province of Nova Scotia. Job creation, of particular significance in the Atlantic provinces, is also expected to be a significant factor in lifting the GDP of Nova Scotia to three per cent in 1998. According to an estimate by the Bank of Nova Scotia, the Sable and pipeline projects alone will create more than 7,500 spin-off jobs. The five major factors which make eastern Canada development possible and economically attractive are: (1) resource potential, (2) technological advancements, (3) alliances, (4) market proximity, and (5) the rapidly expanding global market for natural gas. Each of these factors and how they impact on the East coast natural gas industry were discussed in some detail

Sample Set (SE): SE53 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE53 Covering chemical diversity of genetically-modified tomatoes using metabolomics...signature. We conclude that multi-platform metabolomics is an approach that is both sensitive and robust and

Sample Set (SE): SE10 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE10 Effect of phosphorus nutrition for cabbage metabolites Investigation of Brassi...ca oleracea var. capitata Hatukoi leaf metabolites. 3 growth conditions (high, low and no phosphorus nutrition

Sample Set (SE): SE31 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE31 Comparison of seed metabolites among eggplant fruit tissues Investigation of S...olanum melongena Senryounigou metabolites. 3 tissues (flesh, fruit, peel) data are examined. Takeshi Ara 1,

Sample Set (SE): SE28 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE28 Comparison of leaf metabolites among developmental stages of Hevea brasiliensi...s Investigation of Hevea brasiliensis leaf metabolites. 4 developmental stages and 6 replicates data are exa

Superconductivity in the ferecrystals (PbSe){sub 1.14}(NbSe{sub 2}){sub n}

Energy Technology Data Exchange (ETDEWEB)

Grosse, Corinna; Chiatti, Olivio; Fischer, Saskia F. [Novel Materials Group, Humboldt-Universitaet Berlin (Germany); Alemayehu, Matti B.; Falmbigl, Matthias; Johnson, David C. [Department of Chemistry, University of Oregon, Eugene, OR (United States)

2016-07-01

The ferecrystals (PbSe){sub 1.14}(NbSe{sub 2}){sub n} are artificially layered materials consisting of n NbSe{sub 2} single-layers stacked alternately with atomic double layers of PbSe. NbSe{sub 2} is a transition metal dichalcogenide with interesting electrical properties such as superconductivity and charge density waves. The influence of turbostratic disorder, a random rotation between the NbSe{sub 2} and PbSe layers, on the superconducting transition temperature has been unknown so far. We investigate the structural and temperature-dependent electrical properties of the ferecrystals (PbSe){sub 1.14}(NbSe{sub 2}){sub n} by means of scanning transmission electron microscopy, X-ray diffraction, in-plane resistivity and Hall measurements and compare them to those of analogous non-disordered misfit layer compound (MLC) polymorphs. We observe a superconducting transition in the resistivity of the ferecrystals. The transition temperatures are reduced by up to 55 % with respect to the analogous MLC polymorphs. This indicates that turbostratic disorder substantially weakens the electron-phonon coupling in (PbSe){sub 1.14}(NbSe{sub 2}){sub n}. We discuss the results of the structural and electrical properties of the ferecrystals with respect to their MLC analogues and also with respect to ultra-thin NbSe{sub 2} layers.

Synthesis and optical study of green light emitting polymer coated CdSe/ZnSe core/shell nanocrystals

Energy Technology Data Exchange (ETDEWEB)

Tripathi, S.K., E-mail: surya@pu.ac.in [Department of Physics, Center of Advanced Study in Physics, Panjab University, Chandigarh 160 014 (India); Sharma, Mamta [Department of Physics, Center of Advanced Study in Physics, Panjab University, Chandigarh 160 014 (India)

2013-05-15

Highlights: ► Synthesis of Polymer coated core CdSe and CdSe/ZnSe core/shell NCs. ► From TEM image, the spherical nature of CdSe and CdSe/ZnSe is obtained. ► Exhibiting green band photoemission peak at 541 nm and 549 nm for CdSe core and CdSe/ZnSe core/shell NCs. ► The shell thickness has been calculated by using superposition of quantum confinement energy model. - Abstract: CdSe/ZnSe Core/Shell NCs dispersed in PVA are synthesized by chemical method at room temperature. This is characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV/Vis spectra and photoluminescence spectroscopy (PL). TEM image shows the spherical nature of CdSe/ZnSe core/shell NCs. The red shift of absorption and emission peak of CdSe/ZnSe core/shell NCs as compared to CdSe core confirmed the formation of core/shell. The superposition of quantum confinement energy model is used for calculation of thickness of ZnSe shell.

Sample Set (SE): SE20 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE20 Arabidopsis thaliana leaf metabolite analysis for a software test Investigatio...es that were investigated to optimize the parameters of PowerGet software for better metabolite annotation i

Characterization of phase change Ga{sub 15}Se{sub 77}Ag{sub 8} chalcogenide thin films by laser-irradiation

Energy Technology Data Exchange (ETDEWEB)

Alvi, M.A., E-mail: alveema@hotmail.com [Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah 21589 (Saudi Arabia); Zulfequar, M. [Department of Physics, Jamia Millia Islamia, New Delhi 110025 (India); Al-Ghamdi, A.A. [Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah 21589 (Saudi Arabia)

2013-02-15

Highlights: Black-Right-Pointing-Pointer Effect of laser-irradiation on structure and optical band gap has been investigated. Black-Right-Pointing-Pointer The amorphous nature has been verified by X-ray diffraction and DSC measurements. Black-Right-Pointing-Pointer Laser-irradiation causes a decrease in optical band gap in Ga{sub 15}Se{sub 77}Ag{sub 8} thin films. Black-Right-Pointing-Pointer The decrease in optical band gap can be interpreted on the basis of amorphous-crystalline phase transformation. Black-Right-Pointing-Pointer Optical absorption data showed that the rules of the non-direct transitions predominate. - Abstract: Phase change Ga{sub 15}Se{sub 77}Ag{sub 8} chalcogenide thin films were prepared by thermal evaporation technique. Thin films were then irradiated by Transverse Electrical Excitation at Atmospheric Pressure (TEA) nitrogen laser for different time intervals. The X-ray structural characterization revealed the amorphous nature of as-prepared films while the laser irradiated films show the polycrystalline nature. Field Emission Scanning Electron Microscope (FESEM) has been used to study the structural changes. The results are discussed in terms of the structural aspects and amorphous to crystalline phase change in Ga{sub 15}Se{sub 77}Ag{sub 8} chalcogenide thin films. The observed changes are associated with the interaction of the incident photon and the lone-pairs electrons which affects the band gap of the Ga{sub 15}Se{sub 77}Ag{sub 8} chalcogenide thin films. The optical constants of these thin films are measured by using the absorption spectra measurements as a function of photon energy in the wavelength region 400-1100 nm. It is found that the optical band gap decreases while the absorption coefficient and extinction coefficient increases with increasing the laser-irradiation time. The decrease in the optical band gap has been explained on the basis of change in nature of films, from amorphous to polycrystalline state. The dc

Out-of-Plane Piezoelectricity and Ferroelectricity in Layered α-In2Se3 Nanoflakes.

Science.gov (United States)

Zhou, Yu; Wu, Di; Zhu, Yihan; Cho, Yujin; He, Qing; Yang, Xiao; Herrera, Kevin; Chu, Zhaodong; Han, Yu; Downer, Michael C; Peng, Hailin; Lai, Keji

2017-09-13

Piezoelectric and ferroelectric properties in the two-dimensional (2D) limit are highly desired for nanoelectronic, electromechanical, and optoelectronic applications. Here we report the first experimental evidence of out-of-plane piezoelectricity and ferroelectricity in van der Waals layered α-In 2 Se 3 nanoflakes. The noncentrosymmetric R3m symmetry of the α-In 2 Se 3 samples is confirmed by scanning transmission electron microscopy, second-harmonic generation, and Raman spectroscopy measurements. Domains with opposite polarizations are visualized by piezo-response force microscopy. Single-point poling experiments suggest that the polarization is potentially switchable for α-In 2 Se 3 nanoflakes with thicknesses down to ∼10 nm. The piezotronic effect is demonstrated in two-terminal devices, where the Schottky barrier can be modulated by the strain-induced piezopotential. Our work on polar α-In 2 Se 3 , one of the model 2D piezoelectrics and ferroelectrics with simple crystal structures, shows its great potential in electronic and photonic applications.

Sample Set (SE): SE18 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available in by Orbitrap MS and automated search engine Lipid Search A comprehensive and precise identification of pho...SE18 Global identification of phospholipid molecular species in mouse liver and bra

Electrochemical synthesis of nanostructured Se-doped SnS: Effect of Se-dopant on surface characterizations

International Nuclear Information System (INIS)

Kafashan, Hosein; Azizieh, Mahdi; Balak, Zohre

2017-01-01

Highlights: • Nanostructured SnS_1_-_xSe_x thin films were prepared by using electrodeposition method. • The XRD patterns obviously showed that the synthesized films were polycrystalline. • The PL spectra of SnS_1_-_xSe_x thin films showed four emission peaks. • The UV–vis spectra shows a variation in the optical band gap energy of SnS_1_-_xSe_x thin films from 1.22 to 1.65 eV. • SnS_1_-_xSe_x thin films would be suitable for use as absorber layers. - Abstract: SnS_1_-_xSe_x nanostructures with different Se-dopant concentrations were deposited on fluorine doped tin oxide (FTO) substrate through cathodic electrodeposition technique. The pH, temperature, applied potential (E), and deposition time remained were 2.1, 60 °C, −1 V, and 30 min, respectively. SnS_1_-_xSe_x nanostructures were characterized using X-ray diffraction (XRD), field emission scanning electron microcopy (FESEM), energy dispersive X-ray spectroscopy (EDX), room temperature photoluminescence (PL), and UV–vis spectroscopy. The XRD patterns revealed that the SnS_1_-_xSe_x nanostructures were polycrystalline with orthorhombic structure. FESEM showed various kinds of morphologies in SnS_1_-_xSe_x nanostructures due to Se-doping. PL and UV–vis spectroscopy were used to evaluate the optical properties of SnS_1_-_xSe_x thin films. The PL spectra of SnS_1_-_xSe_x nanostructures displayed four emission peaks, those are a blue, a green, an orange, and a red emission. UV–vis spectra showed that the optical band gap energy (E_g) of SnS_1_-_xSe_x nanostructures varied between 1.22–1.65 eV, due to Se-doping.

Sample Set (SE): SE14 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE14 Effect of agricultural films for tomato fruit metabolites Investigation of Sol...anum lycopersicum fruit metabolites. 3 growth conditions (covered with normal or UV cut agricultural film or no agricultura

Properties of the CuGaSe2 and CuInSe2 (001) surface

International Nuclear Information System (INIS)

Deniozou, T.

2005-01-01

The main task of this work was to investigate the (001) CuGaSe 2 and CuInSe 2 surface in dependence of preparation and stoichiometry. The knowledge of the atomic structure as well as other surface properties is important in respect to optimization of novel thin film solar cells. For the characterization of the layers mainly Auger electron Spectroscopy, low-energy electron diffraction and photoelectron spectroscopy were implemented. The development of an appropriate procedure with Ar + sputtering and annealing combined with decapping enabled the preparation of clean and well-ordered surfaces. Different surface structures were observed in dependence of the layer preparation and composition. A (4 x 1) reconstruction was observed for the first time on CuGaSe 2 layers grown with a moderate Cu-excess after preparation by sputtering and annealing. Similarly a (4 x 2) reconstruction was detected on CuInSe2 surfaces of Cu-poor layers. A reconstruction could be also observed on Cu-poorer layers, however the facets/steps could not be completely removed. Cu-richer layers were facet-free, however the observed reconstruction was also weaker. Thus it was shown that in contrary to recent expectations, according to which only the (112) surface is stable, also the (001) can be stable under particular conditions. The appearance of facets or steps is correlated with the presence of CuIn 3 Se 5 or CuGa 3 Se 5 phases. This information is furthermore important for the understanding of grain boundaries in polycrystalline CuGaSe 2 and CuInSe 2 . Binding energy shifts were observed for the first time on all Se3d, In4d, Ga3d, Cu3d core levels of the reconstructed surfaces. By comparison with results from the literature from the similar ZnSe (100) surface a modell for the (4 x 2) reconstruction was proposed. The surface components in the Se3d, In4d and Cu3d emission were attributed to Se dimers or In and Cu adatoms respectively. The x 1 periodicity of the (4 x 1) reconstruction of CuGaSe 2 is

Sample Set (SE): SE16 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE16 Effect of agricultural films for spinach leaf metabolites 2 Investigation of S...pinacia oleracea leaf metabolites. 3 growth conditions (covered with normal or UV cut agricultural film or no agricultura

Sample Set (SE): SE26 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE26 Effect of compost for cabbage metabolites Investigation of Brassica oleracea v...ar. capitata YR Seisyun leaf metabolites. 2 growth conditions (with or without 6t compost treatment) and 3 r

Procurement and participation opportunities onshore

International Nuclear Information System (INIS)

Norcia, J.

1998-01-01

Maritimes and Northeast Pipelines Company is constructing a 1048 km underground gas transmission pipeline that will transport Sable natural gas to markets in Nova Scotia, New Brunswick and New England. The Sable Offshore Energy Project brings opportunities for new industries to Atlantic Canada, including the potential for future Sable gas exploration, development and production which will provide thousands of jobs and benefits for local businesses during the construction phase. Maritimes and Northeast Pipelines plan to maximize local content for the construction of the 565 km Canadian portion of the pipeline. The construction phase alone should create about 1,500 jobs during peak times. Seventy per cent of the labour will be sourced locally. Clean-up, landscaping, fencing and tile repair, monitoring services and pipeline inspection are some of the other opportunities that will be contracted to local businesses. Major long-term benefits of the project are expected to be in the construction of lateral or feeder pipelines and in the construction of gas distribution utilities

Stable and metastable equilibria in PbSe + SnI2=SnSe + PbI2

International Nuclear Information System (INIS)

Odin, I.N.; Grin'ko, V.V.; Kozlovskij, V.F.; Demidova, E.D.

2003-01-01

T-x-y phase diagrams of the PbSe + SnI 2 =SnSe + PbI 2 mutual system (stable states) are plotted for the first time. It is shown that melt, solid solutions on the base of components of the mutual system and phase on the base of Sn 2 SeI 4 take part in phase equilibria. Transformations in the PbSe + SnI 2 =SnSe + PbI 2 mutual system leading to crystallization of metastable polytype modifications of lead iodides and metastable ternary compound forming in PbSe-PbI 2 system are investigated for the first time [ru

Copper Selenidophosphates Cu4P2Se6, Cu4P3Se4, Cu4P4Se3, and CuP2Se, Featuring Zero-, One-, and Two-Dimensional Anions.

Science.gov (United States)

Kuhn, Alexander; Schoop, Leslie M; Eger, Roland; Moudrakovski, Igor; Schwarzmüller, Stefan; Duppel, Viola; Kremer, Reinhard K; Oeckler, Oliver; Lotsch, Bettina V

2016-08-15

Five new compounds in the Cu/P/Se phase diagram have been synthesized, and their crystal structures have been determined. The crystal structures of these compounds comprise four previously unreported zero-, one-, and two-dimensional selenidophosphate anions containing low-valent phosphorus. In addition to two new modifications of Cu4P2Se6 featuring the well-known hexaselenidohypodiphosphate(IV) ion, there are three copper selenidophosphates with low-valent P: Cu4P3Se4 contains two different new anions, (i) a monomeric (zero-dimensional) selenidophosphate anion [P2Se4](4-) and (ii) a one-dimensional selenidophosphate anion [Formula: see text], which is related to the well-known gray-Se-like [Formula: see text] Zintl anion. Cu4P4Se3 contains one-dimensional [Formula: see text] polyanions, whereas CuP2Se contains the 2D selenidophosphate [Formula: see text] polyanion. It consists of charge-neutral CuP2Se layers separated by a van der Waals gap which is very rare for a Zintl-type phase. Hence, besides black P, CuP2Se constitutes a new possible source of 2D oxidized phosphorus containing layers for intercalation or exfoliation experiments. Additionally, the electronic structures and some fundamental physical properties of the new compounds are reported. All compounds are semiconducting with indirect band gaps of the orders of around 1 eV. The phases reported here add to the structural diversity of chalcogenido phosphates. The structural variety of this family of compounds may translate into a variety of tunable physical properties.

Exciton dephasing and biexciton binding in CdSe/ZnSe islands

DEFF Research Database (Denmark)

Wagner, Hans Peter; Tranitz, H.-P.; Preis, H

1999-01-01

The dephasing of excitons and the formation of biexcitons in self-organized CdSe/ZnSe islands grown by molecular-beam epitaxy is investigated using spectrally resolved four-wave mixing. A distribution of exciton-exciton scattering efficiencies and dephasing times in the range of 0.5-10 ps...

Simultaneous tracing of 76Se-selenite and 77Se-selenomethionine by absolute labeling and speciation

International Nuclear Information System (INIS)

Suzuki, Kazuo T.; Somekawa, Layla; Kurasaki, Kazuki; Suzuki, Noriyuki

2006-01-01

Nutritional selenocompounds are transformed into the assumed common intermediate selenide, which is utilized for the synthesis of selenoenzymes or transformed into methylated metabolites for excretion. Hence, selenocompound metabolites can be traced only with labeled selenium. Here we applied a new tracer method for the metallomics of biometals using simultaneous speciation of each metallome labeled with different homo-elemental isotopes to metabolism and availability of selenium. Rats were depleted of endogenous natural abundance selenium by feeding a single selenium stable isotope ( 82 Se-selenite) and then administered 76 Se-selenite and 77 Se-selenomethionine ( 77 Se-SeMet)simultaneously. Biological samples were subjected to quantification and speciation analysis by HPLC-ICPMS. Metabolites of the labeled 76 Se and 77 Se and interaction with endogenous selenium were traced and examined without interference from the corresponding endogenous natural abundance isotopes. Differences in the distribution and metabolism among organs and between the two nutritional selenocompounds were compared under exactly identical biological and analytical conditions: (1) selenite was distributed more efficiently than SeMet in organs and body fluids except the pancreas. (2) SeMet was taken up by organs in its intact form. (3) Selenium of SeMet origin was distributed selectively in the pancreas and mostly bound to a protein together with intact SeMet. (4) Selenosugars A and B but not trimethylselenonium (TMSe) were detected in the liver. (5) Selenosugar B and TMSe were detected in the kidneys

Electrochemical synthesis of nanostructured Se-doped SnS: Effect of Se-dopant on surface characterizations

Energy Technology Data Exchange (ETDEWEB)

Kafashan, Hosein, E-mail: hosein840521@gmail.com; Azizieh, Mahdi; Balak, Zohre

2017-07-15

Highlights: • Nanostructured SnS{sub 1-x}Se{sub x} thin films were prepared by using electrodeposition method. • The XRD patterns obviously showed that the synthesized films were polycrystalline. • The PL spectra of SnS{sub 1-x}Se{sub x} thin films showed four emission peaks. • The UV–vis spectra shows a variation in the optical band gap energy of SnS{sub 1-x}Se{sub x} thin films from 1.22 to 1.65 eV. • SnS{sub 1-x}Se{sub x} thin films would be suitable for use as absorber layers. - Abstract: SnS{sub 1-x}Se{sub x} nanostructures with different Se-dopant concentrations were deposited on fluorine doped tin oxide (FTO) substrate through cathodic electrodeposition technique. The pH, temperature, applied potential (E), and deposition time remained were 2.1, 60 °C, −1 V, and 30 min, respectively. SnS{sub 1-x}Se{sub x} nanostructures were characterized using X-ray diffraction (XRD), field emission scanning electron microcopy (FESEM), energy dispersive X-ray spectroscopy (EDX), room temperature photoluminescence (PL), and UV–vis spectroscopy. The XRD patterns revealed that the SnS{sub 1-x}Se{sub x} nanostructures were polycrystalline with orthorhombic structure. FESEM showed various kinds of morphologies in SnS{sub 1-x}Se{sub x} nanostructures due to Se-doping. PL and UV–vis spectroscopy were used to evaluate the optical properties of SnS{sub 1-x}Se{sub x} thin films. The PL spectra of SnS{sub 1-x}Se{sub x} nanostructures displayed four emission peaks, those are a blue, a green, an orange, and a red emission. UV–vis spectra showed that the optical band gap energy (E{sub g}) of SnS{sub 1-x}Se{sub x} nanostructures varied between 1.22–1.65 eV, due to Se-doping.

Slow-mode degradation mechanism and its control in new bright and long-lived ZnSe white LEDs

Energy Technology Data Exchange (ETDEWEB)

Adachi, Masahiro [Venture Business Laboratory, Tottori University, 4-101 Koyama-Minami, Tottori 680-8552 (Japan); Ando, Koshi; Abe, Tomoki; Inoue, Noboru; Urata, Akihiro; Tsutsumi, Sueyuki; Hashimoto, Yutaka; Kasada, Hirofumi [Electrical and Electronic Department, Tottori University, 4-101 Koyama-Minami, Tottori 680-8552 (Japan); Katayama, Koji; Nakamura, Takao [Semiconductor Technologies R and D Laboratories, Sumitomo Electric Industries Ltd., 1-1-1 Koyakita, Itami, Hyogo, 665-0016 (Japan)

2006-03-15

This paper presents slow-mode degradation mechanism of ZnSe-based white LEDs. A systematic study has been made from a viewpoint of microscopic point defect reaction such as generation and migration in both device active layer (ZnCdSe/ZnSe MQW) and p-type ZnMgSSe cladding layer utilizing DLTS/ ICTS, SSRM (scanning spreading resistance microscope), and EL (electroluminescence)-imaging techniques, coupled with device aging experiments. We have found two different degradation stages (1st and 2nd stages) in the slow-mode degradation, which are caused by quite different microscopic point defect species. The 1st stage is induced by the long-diffusion of H0-center (nitrogen-complex deep hole trap in p-cladding layer), forming high-density dark-spots in the MQW active layer. This active center is generated only in the stress-stimulated condition such as thermal or device fabrication process. After controlling the initial concentration of the H0 center, we have observed no detectable new dark-spots during device operation, leading to fairly long device-lifetime ({proportional_to}1000 h). This 2nd stage has appeared as a carrier (hole) reduction in the p-type cladding layer. This final degradation stage is found to take place by an increase of shallow compensating donor-like centers in p-type cladding layer (ZnMgSSe). Based on these insights on the microscopic point defect reaction, we have developed (new) double cladding i-ZnMgBeSe/p-ZnMgSSe white-LEDs, which has exhibited long device lifetime of over 10000 h. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

A transferable force field for CdS-CdSe-PbS-PbSe solid systems

Science.gov (United States)

Fan, Zhaochuan; Koster, Rik S.; Wang, Shuaiwei; Fang, Changming; Yalcin, Anil O.; Tichelaar, Frans D.; Zandbergen, Henny W.; van Huis, Marijn A.; Vlugt, Thijs J. H.

2014-12-01

A transferable force field for the PbSe-CdSe solid system using the partially charged rigid ion model has been successfully developed and was used to study the cation exchange in PbSe-CdSe heteronanocrystals [A. O. Yalcin et al., "Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth," Nano Lett. 14, 3661-3667 (2014)]. In this work, we extend this force field by including another two important binary semiconductors, PbS and CdS, and provide detailed information on the validation of this force field. The parameterization combines Bader charge analysis, empirical fitting, and ab initio energy surface fitting. When compared with experimental data and density functional theory calculations, it is shown that a wide range of physical properties of bulk PbS, PbSe, CdS, CdSe, and their mixed phases can be accurately reproduced using this force field. The choice of functional forms and parameterization strategy is demonstrated to be rational and effective. This transferable force field can be used in various studies on II-VI and IV-VI semiconductor materials consisting of CdS, CdSe, PbS, and PbSe. Here, we demonstrate the applicability of the force field model by molecular dynamics simulations whereby transformations are initiated by cation exchange.

A transferable force field for CdS-CdSe-PbS-PbSe solid systems

Energy Technology Data Exchange (ETDEWEB)

Fan, Zhaochuan; Vlugt, Thijs J. H., E-mail: t.j.h.vlugt@tudelft.nl [Process and Energy Department, Delft University of Technology, Leeghwaterstraat 39, 2628 CB Delft,The Netherlands (Netherlands); Koster, Rik S.; Fang, Changming; Huis, Marijn A. van [Debye Institute for Nanomaterials Science and Center for Extreme Matter and Emergent Phenomena, Utrecht University, Princetonplein 5, 3584 CC Utrecht (Netherlands); Wang, Shuaiwei [Institute of Nanostructured Functional Materials, Huanghe Science and Technology College, Zhengzhou, Henan 450006 (China); Yalcin, Anil O.; Tichelaar, Frans D.; Zandbergen, Henny W. [Kavli Institute of Nanoscience, Delft University of Technology, Lorentzweg 1, 2628 CJ Delft (Netherlands)

2014-12-28

A transferable force field for the PbSe-CdSe solid system using the partially charged rigid ion model has been successfully developed and was used to study the cation exchange in PbSe-CdSe heteronanocrystals [A. O. Yalcin et al., “Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth,” Nano Lett. 14, 3661–3667 (2014)]. In this work, we extend this force field by including another two important binary semiconductors, PbS and CdS, and provide detailed information on the validation of this force field. The parameterization combines Bader charge analysis, empirical fitting, and ab initio energy surface fitting. When compared with experimental data and density functional theory calculations, it is shown that a wide range of physical properties of bulk PbS, PbSe, CdS, CdSe, and their mixed phases can be accurately reproduced using this force field. The choice of functional forms and parameterization strategy is demonstrated to be rational and effective. This transferable force field can be used in various studies on II-VI and IV-VI semiconductor materials consisting of CdS, CdSe, PbS, and PbSe. Here, we demonstrate the applicability of the force field model by molecular dynamics simulations whereby transformations are initiated by cation exchange.

Determination of K shell fluorescence cross-section and Kβ/Kα intensity ratios for Fe, Se, Te, FeSe, FeTe and TeSe

International Nuclear Information System (INIS)

Saydam, M.; Aksoy, C.; Cengiz, E.; Alaşalvar, C.; Tıraşoğlu, E.; Apaydın, G.

2012-01-01

The fluorescence cross-sections (σ Ki ) and the intensity ratios K β /K α for pure Fe, Se, Te elements and FeSe, FeTe, TeSe complexes have been investigated. The samples were excited by 59.5 keV γ-rays from 241 Am annular radioactive source and emitted X-rays. They were counted by an Ultra-LEGe detector with resolution of 150 eV at 5.9 keV. For pure elements results have been compared with the theoretical calculated values. According to our results band length and mutual interaction of atoms affected the results. We claimed that these effects would help researchers who study on superconductors, especially determining which compound can be show the superconductor properties. - Highlights: ► TeSe, FeSe and FeTe complexes have affected each other in terms of charge transfer. ► Fe excitement and enhancement have been made by Se and Te. ► Attractive interactions between electrons can help to becoming superconductivity.

AgSbSe2 and AgSb(S,Se)2 thin films for photovoltaic applications

International Nuclear Information System (INIS)

Garza, J.G.; Shaji, S.; Rodriguez, A.C.; Das Roy, T.K.; Krishnan, B.

2011-01-01

Silver antimony selenide (AgSbSe 2 ) thin films were prepared by heating sequentially deposited multilayers of antimony sulphide (Sb 2 S 3 ), silver selenide (Ag 2 Se), selenium (Se) and silver (Ag). Sb 2 S 3 thin film was prepared from a chemical bath containing SbCl 3 and Na 2 S 2 O 3 , Ag 2 Se from a solution containing AgNO 3 and Na 2 SeSO 3 and Se thin films from an acidified solution of Na 2 SeSO 3 , at room temperature on glass substrates. Ag thin film was deposited by thermal evaporation. The annealing temperature was 350 deg. C in vacuum (10 -3 Torr) for 1 h. X-ray diffraction analysis showed that the thin films formed were polycrystalline AgSbSe 2 or AgSb(S,Se) 2 depending on selenium content in the precursor films. Morphology and elemental analysis of these films were done using scanning electron microscopy and energy dispersive X-ray spectroscopy. Optical band gap was evaluated from the UV-visible absorption spectra of these films. Electrical characterizations were done using Hall effect and photocurrent measurements. A photovoltaic structure: glass/ITO/CdS/AgSbSe 2 /Al was formed, in which CdS was deposited by chemical bath deposition. J-V characteristics of this structure showed V oc = 435 mV and J sc = 0.08 mA/cm 2 under illumination using a tungsten halogen lamp. Preparation of a photovoltaic structure using AgSbSe 2 as an absorber material by a non-toxic selenization process is achieved.

Highly luminescent CdSe/ZnSe core-shell quantum dots of one-pot preparation in octadecene

NARCIS (Netherlands)

Zeng, Q.; Kong, X.; Zhang, Y.; Zhang, H.

2008-01-01

CdSe/ZnSe core-shell quantum dots were synthesized using a new one-pot procedure where the core was prepared in octadecene. A ZnSe shell around a CdSe nanoparticle was formed by the reaction of selenium-richness on the surfaces of CdSe nanoparticles with Zn2+ from the injected zinc stearate

Study of the 76788082Se(d,p)77798183Se reactions using polarized deuterons

International Nuclear Information System (INIS)

Montestruque, L.A.

1978-01-01

Differential cross sections and vector analyzing powers were measured at an incident deuteron energy of 12.5 MeV for the 76 78 80 82 Se(d,p) 77 79 81 83 Se reactions. The data are compared with the predictions of the DWBA theory to determine the l-value, spin, parity and spectroscopic factor of the resolved states. High resolution measurements were made with a 100 cm broad-range magnetic spectrograph to determine the excitation energies of the states studied, and the possible existence of contaminants in the targets. Definitive spin and parity assignments are made to 16 states in 77 Se, 22 states in 79 Se, 17 states in 81 Se, and 18 states in 83 Se, fifteen of which were previously assigned. In addition, tentative spin assignments were made to one state in 83 Se. The spectrograph measurements allowed the determination of the excitation energies of anumber of additional states in each isotope. Among the 76 states studied in this work, ther are 8 2P/sub 3/2/ states, 4 1F/sub 5/2/ states 6 2P/sub 1/2/ states 4 1G/sub 9/2/ states, 31 2D/sub 5/2/ states, 10 3S/sub 1/2/ states, and 13 2D/sub 3/2 states. A sum-rule analysis was made and the results compared to previous work and to the predictions of the simple pairing theory

Selenium-72 formation via {sup nat}Br(p,x) induced by 100 MeV Protons: Steps towards a novel {sup 72}Se/{sup 72}As generator system

Energy Technology Data Exchange (ETDEWEB)

Ballard, B. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Wycoff, D. [Department of Chemistry, University of Missouri-Columbia, Columbia, MO 65211 (United States); Birnbaum, E.R.; John, K.D. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Lenz, J.W. [John Lenz and Associates, East Lansing, MI 48823 (United States); Jurisson, S.S. [Department of Chemistry, University of Missouri-Columbia, Columbia, MO 65211 (United States); Cutler, C.S. [Missouri University Research Reactor Center, University of Missouri-Columbia, Columbia, MO 65211 (United States); Nortier, F.M.; Taylor, W.A. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Fassbender, M.E., E-mail: mifa@lanl.gov [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

2012-04-15

Selenium-72 production by the proton bombardment of a natural NaBr target has been successfully demonstrated at the Los Alamos National Laboratory Isotope Production Facility (LANL-IPF). Arsenic-72 (half life 26 h) is a medium-lived positron emitting radionuclide with the major advantage of being formed as the daughter of another 'generator' radioisotope (Se-72, 8.5 d). A {sup 72}Se/{sup 72}As generator would be the preferred mechanism for clinical utilization of {sup 72}As for positron emission tomography (PET). No portable {sup 72}Se/{sup 72}As generator system has been demonstrated for convenient, repeated {sup 72}As elution ('milking'). In this work, we describe {sup 72}Se production and recovery from irradiated NaBr targets using a 100 MeV proton beam. We also introduce an {sup 72}As generator principle based on {sup 72}Se chelation followed by liquid-liquid extraction, which will be transferred to a solid-phase sorption/elution system. - Highlights: Black-Right-Pointing-Pointer A bulk production and processing method for {sup 72}Se using low-toxic NaBr in a high-energy proton beam has been developed. Black-Right-Pointing-Pointer A chelation based principle for a {sup 72}Se/{sup 72}As generator has been demonstrated. Black-Right-Pointing-Pointer Comparison of experimental yields to theoretical predictions resulted in good agreement.

Out-of-plane Piezoelectricity and Ferroelectricity in Layered α-In2Se3 Nano-flakes

KAUST Repository

Zhou, Yu

2017-08-25

Piezoelectric and ferroelectric properties in the two dimensional (2D) limit are highly desired for nanoelectronic, electromechanical, and optoelectronic applications. Here we report the first experimental evidence of out-of-plane piezoelectricity and ferroelectricity in van der Waals layered α-In2Se3 nano-flakes. The non-centrosymmetric R3m symmetry of the α-In2Se3 samples is confirmed by scanning transmission electron microscopy, second-harmonic generation, and Raman spectroscopy measurements. Domains with opposite polarizations are visualized by piezo-response force microscopy. Single-point poling experiments suggest that the polarization is potentially switchable for α-In2Se3 nano-flakes with thicknesses down to ~ 10 nm. The piezotronic effect is demonstrated in two-terminal devices, where the Schottky barrier can be modulated by the strain-induced piezopotential. Our work on polar α-In2Se3, one of the model 2D piezoelectrics and ferroelectrics with simple crystal structures, shows its great potential in electronic and photonic applications.

Out-of-plane Piezoelectricity and Ferroelectricity in Layered α-In2Se3 Nano-flakes

KAUST Repository

Zhou, Yu; Wu, Di; Zhu, Yihan; Cho, Yujin; He, Qing; Yang, Xiao; Herrera, Kevin; Chu, Zhaodong; Han, Yu; Downer, Mike; Peng, Hailin; Lai, Keji

2017-01-01

Piezoelectric and ferroelectric properties in the two dimensional (2D) limit are highly desired for nanoelectronic, electromechanical, and optoelectronic applications. Here we report the first experimental evidence of out-of-plane piezoelectricity and ferroelectricity in van der Waals layered α-In2Se3 nano-flakes. The non-centrosymmetric R3m symmetry of the α-In2Se3 samples is confirmed by scanning transmission electron microscopy, second-harmonic generation, and Raman spectroscopy measurements. Domains with opposite polarizations are visualized by piezo-response force microscopy. Single-point poling experiments suggest that the polarization is potentially switchable for α-In2Se3 nano-flakes with thicknesses down to ~ 10 nm. The piezotronic effect is demonstrated in two-terminal devices, where the Schottky barrier can be modulated by the strain-induced piezopotential. Our work on polar α-In2Se3, one of the model 2D piezoelectrics and ferroelectrics with simple crystal structures, shows its great potential in electronic and photonic applications.

Etch Pit Studies of II-VI-Wide Bandgap Semiconductor Materials ZnSe, ZnCdSe, and ZnCdMgSe Grown on InP

National Research Council Canada - National Science Library

Semendy, Fred

1999-01-01

Etch pit density (EPD) determination studies have been conducted on II-VI semiconductor materials ZnSe, ZnCdSe, and ZnCdMgSe grown on InP surfaces for the first time by using various etching solutions under different...

Synthesis of ZnSe and ZnSe:Cu quantum dots by a room temperature photochemical (UV-assisted) approach using Na2 SeO3 as Se source and investigating optical properties.

Science.gov (United States)

Khafajeh, R; Molaei, M; Karimipour, M

2017-06-01

In this study, ZnSe and ZnSe:Cu quantum dots (QDs) were synthesized using Na 2 SeO 3 as the Se source by a rapid and room temperature photochemical (UV-assisted) approach. Thioglycolic acid (TGA) was employed as the capping agent and UV illumination activated the chemical reactions. Synthesized QDs were successfully characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL) and UV-visible (UV-vis) spectroscopy, Fourier transform-infrared (FT-IR), and energy dispersive X-ray spectroscopy (EDX). XRD analysis demonstrated the cubic zinc blend phase QDs. TEM images indicated that round-shaped particles were formed, most of which had a diameter of about 4 nm. The band gap of the ZnSe QDs was higher than that for ZnSe in bulk. PL spectra indicated an emission with three peaks related to the excitonic, surface trap states and deep level (DL) states. The band gap and QD emission were tunable only by UV illumination time during synthesis. ZnSe:Cu showed green emission due to transition of electrons from the Conduction band (CB) or surface trap states to the 2 T 2 acceptor levels of Cu 2 + . The emission was increased by increasing the Cu 2 + ion concentration, such that the optimal value of PL intensity was obtained for the nominal mole ratio of Cu:Zn 1.5%. Copyright © 2016 John Wiley & Sons, Ltd.

Vapor-phase synthesis and characterization of ZnSe nanoparticles

Science.gov (United States)

Sarigiannis, D.; Pawlowski, R. P.; Peck, J. D.; Mountziaris, T. J.; Kioseoglou, G.; Petrou, A.

2002-06-01

Compound semiconductor nanoparticles are an exciting class of materials whose unique optical and electronic properties can be exploited in a variety of applications, including optoelectronics, photovoltaics, and biophotonics. The most common route for synthesizing such nanoparticles has been via liquid-phase chemistry in reverse micelles. This paper discusses a flexible vapor-phase technique for synthesis of crystalline compound semiconductor nanoparticles using gas-phase condensation reactions near the stagnation point of a counterflow jet reactor. ZnSe nanoparticles were formed by reacting vapors of dimethylzinc: triethylamine adduct and hydrogen selenide at 120Torr and room temperature (28°C). No attempt was made to passivate the surface of the particles, which were collected as random aggregates on silicon wafers or TEM grids placed downstream of the reaction zone. Particle characterization using TEM, electron diffraction, Raman and EDAX revealed that the aggregates consisted of polycrystalline ZnSe nanoparticles, almost monodisperse in size (with diameters of ~40nm). The polycrystalline nanoparticles appear to have been formed by coagulation of smaller single-crystalline nanoparticles with characteristic size of 3-5 run.

Effects of the copper content on the structural and electrical properties of Cu2ZnSnSe4 bulks

Science.gov (United States)

Tsega, Moges; Dejene, F. B.; Koao, L. F.

2016-01-01

We have investigated the concept of defect in CuxZnSnSe4 (x=1.6-2.0) and Cuy(Zn0.9Sn1.1)Se4 (y= 1.6-2.0) bulks prepared by liquid-phase sintering at 600 °C for 2 h with soluble sintering aids of Sb2S3 and Te. All samples were found to exhibit p-type semiconductor for CuxZnSnSe4, while n-type of behavior obtained at y= 1.8-2.0 for Cuy(Zn0.9Sn1.1)Se4 pellets. The Cu vacancy acts as an acceptor point defect to form the p-type semiconductor, and Sn4+ acts as a donor to form the n-type behavior for the Sn-rich CZTSe. SEM images of pellets show dense surface morphology, and increase in grain size upon Cu inclusion. The largely increased Hall mobility and the slightly changed carrier concentration for Cuy(Zn0.9Sn1.1)Se4 with increasing the Cu content is related to the types of its defects. At y=2.0 with carrier concentration of 4.88×1017 cm-3 showed the highest mobility of around 58 cm2/V s. Based upon the proposed point defects, the CZTSe property can be consistently explained.

Theoretical and experimental studies of the ZnSe/CuInSe2 heterojunction band offset

International Nuclear Information System (INIS)

Nelson, A.J.; Schwerdtfeger, C.R.; Wei, S.; Zunger, A.; Rioux, D.; Patel, R.; Hoechst, H.

1993-01-01

We report first-principles band structure calculations that show that ZnSe/CuInSe 2 has a significant valence band offset (VBO, ΔE v ): 0.70±0.05 eV for the relaxed interface and 0.60±0.05 eV for the coherent interface. These large values demonstrate the failure of the common anion rule. This is traced to a stronger Cu,d-Se,p level repulsion in CuInSe 2 than the Zn,d-Se,p repulsion in ZnSe. The VBO was then studied by synchrotron radiation soft x-ray photoemission spectroscopy. ZnSe overlayers were sequentially grown in steps on n-type CuInSe 2 (112) single crystals at 200 degree C. In situ photoemission measurements were acquired after each growth in order to observe changes in the valence band electronic structure as well as changes in the In 4d and Zn 3d core lines. Results of these measurements reveal that the VBO is ΔE v =0.70±0.15 eV, in good agreement with the first-principles prediction

Que se vea lo que se oye: a vueltas con los fonemas y las letras

Directory of Open Access Journals (Sweden)

Gómez del Estal Villarino, Mario

2011-03-01

Full Text Available Partiendo de lo que el refrán “La letra con sangre entra” viene a decir a quien se deje escucharlo, se abre una descripción de las diferencias radicales que se dan entre aprender a hablar y aprender a escribir. La relación entre ambas actividades no se puede entender sin analizar la tan extendida perversión que supone hablar lo que se escribe en vez de escribir lo que se habla. A continuación, se detallan algunos de los síntomas más frecuentes de dicha perversión, caracterizados todos por la intromisión de la conciencia en terrenos donde lo único que hace es estorbar, en especial la pronunciación pedantesca de ciertos finales silábicos o de palabra, como en traNSporte, aBStraKción, óPtico, oBjeto, fúTbol, libertaD, diGno o fraK, así como las distintas deformaciones que sufren las palabras que la ortografía académica prescribe que se escriban con la letra equis.

Optical third harmonic generation in the magnetic semiconductor EuSe

Science.gov (United States)

Lafrentz, M.; Brunne, D.; Kaminski, B.; Pavlov, V. V.; Pisarev, R. V.; Henriques, A. B.; Yakovlev, D. R.; Springholz, G.; Bauer, G.; Bayer, M.

2012-01-01

Third harmonic generation (THG) has been studied in europium selenide EuSe in the vicinity of the band gap at 2.1-2.6 eV and at higher energies up to 3.7 eV. EuSe is a magnetic semiconductor crystalizing in centrosymmetric structure of rock-salt type with the point group m3m. For this symmetry the crystallographic and magnetic-field-induced THG nonlinearities are allowed in the electric-dipole approximation. Using temperature, magnetic field, and rotational anisotropy measurements, the crystallographic and magnetic-field-induced contributions to THG were unambiguously separated. Strong resonant magnetic-field-induced THG signals were measured at energies in the range of 2.1-2.6 eV and 3.1-3.6 eV for which we assign to transitions from 4f7 to 4f65d1 bands, namely involving 5d(t2g) and 5d(eg) states.

Splitting of the Ti-3d bands of TiSe{sub 2} in the charge-density wave phase

Energy Technology Data Exchange (ETDEWEB)

Ghafari, A., E-mail: aa.ghafari@gmail.com [Elettra Sincrotrone Trieste, Strada Statale 14 km 163.5, I-34149, Trieste (Italy); Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14109, Berlin (Germany); Petaccia, L. [Elettra Sincrotrone Trieste, Strada Statale 14 km 163.5, I-34149, Trieste (Italy); Janowitz, C. [Institute of Physics, Humboldt-University of Berlin, Newtonst. 15, D-12489, Berlin (Germany)

2017-02-28

Highlights: • Angle resolved photoemission spectroscopy (ARPES). • Charge density wave (CDW). • TiSe{sub 2}- Splitting of the conduction bands. Horizontal and vertical polarizations. Temperature dependence. - Abstract: Very high resolution angular resolved photoemission (ARPES) spectra on TiSe{sub 2} in two distinct polarization geometries (vertical and horizontal) at temperatures between 300 K and 22 K enabled the observation of details of bands near the Fermi level not reported so far. Calculations of the electronic band structure based on density functional theory (DFT) using B3LYP hybrid functional and MBJ potential (with and without spin-orbit coupling) were performed to obtain the orbital symmetry and dispersion. Two degenerate conduction bands (CB’s) were observed at the Γ-point, a weak CB- emission at the A-point, and two non degenerate CB’s (i.e. splitting of CB) at the M/L-point of the Brillouin Zone (BZ). The splitting was detected at L for both polarizations, while at M remarkably only for horizontal polarization. These results cannot be fully accounted for by current theories for the charge density wave (CDW) and point to a reduced symmetry of the electronic states, possibly due to the chiral CDW.

Proposition for Improvement of Economics Situation with Use of Analysis of Break Even Point

OpenAIRE

Starečková, Alena

2015-01-01

Bakalářská práce se zabývá realizací Break-even-point analýzy v podniku, analýzou nákladů a návrhem na zlepšení finanční situace podniku zejména z pohledu nákladů. V první části práce jsou vymezeny pojmy a vzorce týkajících se Break-even-point analýzy a problematiky nákladů. Ve druhé části pak na konkrétním podniku bude provedena analýza bodu zvratu a následné návrhy na zlepšení stávajícího stavu. Bachelor work is dealing with realization of break even point analysis of company, analysis o...

SeP, ApoER2 and megalin as necessary factors to maintain Se homeostasis in mammals.

Science.gov (United States)

Krol, Magdalena Beata; Gromadzinska, Jolanta; Wasowicz, Wojciech

2012-10-01

Selenoprotein P (SeP) is an extracellular protein containing ten selenium atoms in the form of selenocysteine, secreted mainly from the liver. About 60% of the whole plasma selenium level is present in SeP, which makes it a useful biomarker of selenium nutritional status. The main functions of SeP are transport and storage of selenium in plasma. It is especially an important protein for the brain, testes and kidneys where the supplementation of the proper amount of Se ensures the synthesis of selenoenzymes with antioxidant properties.Recently, it has been found that SeP uptake in kidneys, testes and brain depends on the apolipoprotein receptor 2 (ApoER2) and lipoprotein megalin receptor (Lrp2). Megalin receptor represents a physiological SeP receptor in kidneys, mediating the re-uptake of secreted SeP from the primary urine. The absence of a functional megalin receptor causes a significant reduction of plasma selenium and the SeP levels as a result of Se excretion. ApoER2 is a SeP receptor in the brain and testes which uptakes Se from the extracellular fluid. Deletion of ApoER2 in mice leads to a lowered selenium level in the brain and testes, neurological dysfunction, production of abnormal spermatozoa, infertility and even death when the subjects are fed a low-selenium diet. Copyright © 2012 Elsevier GmbH. All rights reserved.

Exploring single-layered SnSe honeycomb polymorphs for optoelectronic and photovoltaic applications

Science.gov (United States)

Ul Haq, Bakhtiar; AlFaify, S.; Ahmed, R.; Butt, Faheem K.; Laref, A.; Shkir, Mohd.

2018-02-01

Single-layered tin selenide that shares the same structure with phosphorene and possesses intriguing optoelectronic properties has received great interest as a two-dimensional material beyond graphene and phosphorene. Herein, we explore the optoelectronic response of the newly discovered stable honeycomb derivatives (such as α , β , γ , δ , and ɛ ) of single-layered SnSe in the framework of density functional theory. The α , β , γ , and δ derivatives of a SnSe monolayer have been found to exhibit an indirect band gap, however, the dispersion of their band-gap edges demonstrates multiple direct band gaps at a relatively high energy. The ɛ -SnSe, however, features an intrinsic direct band gap at the high-symmetry Γ point. Their energy band gaps (0.53, 2.32, 1.52, 1.56, and 1.76 eV for α -, β -, γ -, δ -, and ɛ -SnSe, respectively), calculated at the level of the Tran-Blaha modified Becke-Johnson approach, mostly fall right in the visible range of the electromagnetic spectrum and are in good agreement with the available literature. The optical spectra of these two-dimensional (2D) SnSe polymorphs (besides β -SnSe) are highly anisotropic and possess strictly different optical band gaps along independent diagonal components. They show high absorption in the visible and UV ranges. Similarly, the reflectivity, refraction, and optical conductivities inherit strong anisotropy from the dielectric functions as well and are highly visible-UV polarized along the cartesian coordinates, showing them to be suitable for optical filters, polarizers, and shields against UV radiation. Our investigations suggest these single-layered SnSe allotropes as a promising 2D material for next-generation nanoscale optoelectronic and photovoltaic applications beyond graphene and phosphorene.

Sample Set (SE): SE50 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available oids We report that flavonoids with radical scavenging activity mitigate against ox...ress. These data confirm the usefulness of flavonoids for enhancing both biotic and abiotic stress tolerance...SE50 Enhancement of oxidative and drought tolerance in arabidopsis by overaccumulation of antioxidant flavon

Sample Set (SE): SE52 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE52 Mass spectra-based framework for automated structural elucidation of metabolom...e data to explore phytochemical diversity A novel framework for automated elucidation of metabolite structur...te ontology system was also introduced to attain putative characterization of the metabolite signals.The automate

Microstructure and thermoelectric properties of CuInSe2/In2Se3 compound

Science.gov (United States)

Wang, Kang; Feng, Jing; Ge, Zhen-Hua; Qin, Peng; Yu, Jie

2018-01-01

CuInSe2 powders were synthesized by solvothermal method, and then the CuInSe2/In2Se3 bulk samples were fabricated by spark plasma sintering (SPS) technique. To investigate the phase composition, the powders were determined by X-ray diffraction (XRD). The microstructures of the powders and bulk samples were observed by scanning electron microscopy (SEM). The transportation of the electronic properties and thermal conductivity were measured at room temperature to 700 K. According to the results, the CuInSe2 powders appeared in flower-like patterns which ranged from 3 μm to 6 μm. CuInSe2 powders were synthesized at 180∘C with a chalcopyrite structure. The Seebeck coefficient increased significantly in composite thermoelectric materials up to 200μVṡK-1 at 623 K. The thermal conductivity of the sample significantly decreases from the room temperature to 700 K. The CuInSe2 bulk composite by solvothermal method achieves the highest ZT value of 0.187 at 700 K.

Phase diagram of the Sb-Se-I system and thermodynamic properties of SbSeI

International Nuclear Information System (INIS)

Aliev, Z.S.; Musaeva, S.S.; Babanly, D.M.; Shevelkov, A.V.; Babanly, M.B.

2010-01-01

The Sb-Se-I system was investigated by using the DTA and XRD analyses and EMF measurements with an antimony electrode. The T-x diagram of the binary Sb-I system was accurately redefined. A number of polythermal sections and the projection of the liquidus surface were constructed. The fields of the primary crystallization, as well as the types and coordinates of non- and monovariant equilibria were determined. It is shown that the quasi-binary sections Sb 2 Se 3 -SbI 3 , Sb-SbSeI, SbI 3 -Se, and SbSeI-Se triangulate the Sb-Se-I system, leading to five independent subsystems. A broad area of immiscibility, that overlaps a certain part of the antimony primary crystallization field, was found. From the EMF measurements, the partial molar functions of antimony (ΔG-bar, ΔH-bar, ΔS-bar) as well as standard integral thermodynamic functions of SbSeI were calculated. The latter were found to have the following values: ΔG f,298 0 =-80.12±1.81kJ/mol; ΔH f,298 0 =-77.3±1.8kJ/mol; S 298 0 =155.2±9.5J/(molK).

Phase diagram of the Sb-Se-I system and thermodynamic properties of SbSeI

Energy Technology Data Exchange (ETDEWEB)

Aliev, Z S; Musaeva, S S; Babanly, D M [Baku State University, General and Inorganic Chemistry Department (Azerbaijan); Shevelkov, A.V., E-mail: shev@inorg.chem.msu.r [Moscow Lomonosov State University, Chemistry Department (Russian Federation); Babanly, M.B., E-mail: Babanly_mb@rambler.r [Baku State University, General and Inorganic Chemistry Department (Azerbaijan)

2010-09-03

The Sb-Se-I system was investigated by using the DTA and XRD analyses and EMF measurements with an antimony electrode. The T-x diagram of the binary Sb-I system was accurately redefined. A number of polythermal sections and the projection of the liquidus surface were constructed. The fields of the primary crystallization, as well as the types and coordinates of non- and monovariant equilibria were determined. It is shown that the quasi-binary sections Sb{sub 2}Se{sub 3}-SbI{sub 3}, Sb-SbSeI, SbI{sub 3}-Se, and SbSeI-Se triangulate the Sb-Se-I system, leading to five independent subsystems. A broad area of immiscibility, that overlaps a certain part of the antimony primary crystallization field, was found. From the EMF measurements, the partial molar functions of antimony ({Delta}G-bar, {Delta}H-bar, {Delta}S-bar) as well as standard integral thermodynamic functions of SbSeI were calculated. The latter were found to have the following values: {Delta}G{sub f,298}{sup 0}=-80.12{+-}1.81kJ/mol; {Delta}H{sub f,298}{sup 0}=-77.3{+-}1.8kJ/mol; S{sub 298}{sup 0}=155.2{+-}9.5J/(molK).

Influence of CdTe sub-monolayer stressor on CdSe quantum dot self-assembling in ZnSe

International Nuclear Information System (INIS)

Sedova, I.V.; Lyublinskaya, O.G.; Sorokin, S.V.; Sitnikova, A.A.; Solnyshkov, D.D.; Rykhova, O.V.; Toropov, A.A.; Ivanov, S.V.

2006-01-01

This paper reports on the attempt to apply the stressor-controlled quantum dot (QD) fabrication technique to the conventional CdSe/ZnSe nanostructures. Super-strained CdTe fractional monolayer (Δa/a∝14% for CdTe/ZnSe) grown on top of the Te-stabilized ZnSe surface prior to deposition of the QD material (CdSe) has been used as a stressor which is expected to affect size, composition and density of CdSe QDs. The grown structures are studied by X-ray diffraction, transmission-electron microscopy, photoluminescence (PL) and PL excitation in comparison with conventional CdSe/ZnSe QDs obtained by a modified migration enhanced epitaxy technique. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Structural and optical properties of nanocrystalline CdSe and Al:CdSe thin films for photoelectrochemical application

Energy Technology Data Exchange (ETDEWEB)

Gawali, Sanjay A. [Electrochemical Materials Laboratory, Department of Physics, Shivaji University, Kolhapur - 416 004 (India); Bhosale, C.H., E-mail: bhosale_ch@yahoo.com [Electrochemical Materials Laboratory, Department of Physics, Shivaji University, Kolhapur - 416 004 (India)

2011-10-03

Highlights: {yields} The CdSe and Al:CdSe thin films have been successfully deposited by SPT. {yields} Hexagonal cubic structured CdSe and Al: CdSe thin films are observed. {yields} Large number of fine grains, Uniform and compact growth morphology. {yields} Hydrophilic surface nature. {yields} Al:CdSe have better PEC performance than CdSe. - Abstract: Nanocrystalline CdSe and Al:CdSe semiconductor thin films have been successfully synthesized onto amorphous and FTO glass substrates by spray pyrolysis technique. Aqueous solutions containing precursors of Cd and Se have been used to obtain good quality films. The optimized films have been characterized for their structural, morphological, wettability and optical properties. X-ray diffraction (XRD) studies show that the films are polycrystalline in nature with hexagonal crystal structure. Scanning electron microscopy (SEM) studies show that the film surface is smooth, uniform and compact in nature. Water wettability study reveals that the films are hydrophilic behavior. The formation of CdSe and Al:CdSe thin film were confirmed with the help of FTIR spectroscopy. UV-vis spectrophotometric measurement showed a direct allowed band gap lying in the range 1.673-1.87 eV. Output characteristics were studied by using cell configuration n- CdSe/Al:CdSe |1 M (NaOH + Na{sub 2} + S)|C. An efficient solar cell having a power conversion efficiency of 0.38% at illumination 25 mW cm{sup -2} was fabricated.

Señas Mexicano

Directory of Open Access Journals (Sweden)

Juan F. García Mejía

2007-01-01

Full Text Available En este artículo se muestra un sistema que permite el estudio y práctica del Lenguaje de Señas Mexicano (LMS, el cual es el método de comunicación de las personas que padecen un trastorno de procesamiento auditivo. El sistema propuesto en este artículo consta de un guante de tela instrumentado con sensores de flexión, una etapa de acondicionamiento de señales y una tarjeta de adquisición de datos; que en su conjunto constituyen el Hardware. El software esta formado por un programa de adquisición de datos y una interfaz de usuario, ambos codificados en Visual Basic Net. El sistema propuesto se modela por medio del lenguaje de modelado unificado (UML, ya que Visual Basic es un lenguaje orientado a eventos.

Sample Set (SE): SE27 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE27 Effect of agricultural films for cabbage leaf metabolites Investigation of Bra...ssica oleracea var. capitata YR Tenkuu leaf metabolites. 3 growth conditions (covered with normal or UV cut agricultura...l film or no agricultural film), 3 replicates data are examined. Takeshi Ara 1, Naoki Yamamoto 1,

Antiphase Boundaries in the Turbostratically Disordered Misfit Compound (BiSe)(1+δ)NbSe2.

Science.gov (United States)

Mitchson, Gavin; Falmbigl, Matthias; Ditto, Jeffrey; Johnson, David C

2015-11-02

(BiSe)(1+δ)NbSe2 ferecrystals were synthesized in order to determine whether structural modulation in BiSe layers, characterized by periodic antiphase boundaries and Bi-Bi bonding, occurs. Specular X-ray diffraction revealed the formation of the desired compound with a c-axis lattice parameter of 1.21 nm from precursors with a range of initial compositions and initial periodicities. In-plane X-ray diffraction scans could be indexed as hk0 reflections of the constituents, with a rectangular basal BiSe lattice and a trigonal basal NbSe2 lattice. Electron micrographs showed extensive turbostratic disorder in the samples and the presence of periodic antiphase boundaries (approximately 1.5 nm periodicity) in BiSe layers oriented with the [110] direction parallel to the zone axis of the microscope. This indicates that the structural modulation in the BiSe layers is not due to coherency strain resulting from commensurate in-plane lattices. Electrical transport measurements indicate that holes are the dominant charge carrying species, that there is a weak decrease in resistivity as temperature decreases, and that minimal charge transfer occurs from the BiSe to NbSe2 layers. This is consistent with the lack of charge transfer from the BiX to the TX2 layers reported in misfit layer compounds where antiphase boundaries were observed. This suggests that electronic considerations, i.e., localization of electrons in the Bi-Bi pairs at the antiphase boundaries, play a dominant role in stabilizing the structural modulation.

Heterojunctions formed by annealing of GaSe and InSe layered crystals in zinc vapor

Directory of Open Access Journals (Sweden)

Kudrynskyi Z. R.

2012-12-01

Full Text Available The article presents a method of creating heterojunc¬tions based on semiconductors with different lattice types. Substrates manufactured from GaSe and InSe layered crystals were annealed in Zn vapor. This way, n-ZnSe–p-GaSe and n-ZnSe–p-InSe heterojunctions were obtained. The obtained heterojunctions are photo¬sensitive in near and infrared spectral regions. This method opens up greate possibilities of producing heterostructures with a desired sensitivity band.

Ellipsometric spectroscopy on polycrystalline CuIn1-xGaxSe2: Identification of optical transitions

International Nuclear Information System (INIS)

El Haj Moussa, G.W.; Ajaka, M.; El Tahchi, M.; Eid, E.; Llinares, C.

2005-01-01

Bulk materials have been synthesized by the Bridgman technique using the elements Cu, Ga, In, Se. Bulk samples have been characterized by EDS (Energy Dispersive Spectrometer), hot point, X-ray diffraction, photoluminescence and spectroscopic ellipsometry (SE). The samples used were well crystallized and lended strong support to the achievement of a good stoichiometry. Energy levels above the gap in the band scheme were determined by measuring the dielectric function at ambient temperature for energies lying between 1.5 and 5.5 eV. Many transitions were observed above the gap for different samples of CuIn 1-x Ga x Se 2 (0≤x≤1) alloy. Spectroscopic ellipsometry gave evidence for the interpretation of the choice of gap values which were compatible with that obtained from solar spectrum [1]. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Strain in epitaxial high-index Bi{sub 2}Se{sub 3}(221) films grown by molecular-beam epitaxy

Energy Technology Data Exchange (ETDEWEB)

Li, Bin [Physics Department, The University of Hong Kong, Pokfulam Road (Hong Kong); Chen, Weiguang [College of Physics and Electronic Engineering, Henan Normal University, Xinxiang, Henan 453007 (China); School of Physics and Electronic Engineering, Zhengzhou Normal University, Zhengzhou, Henan 450044 (China); Guo, Xin; Ho, Wingkin [Physics Department, The University of Hong Kong, Pokfulam Road (Hong Kong); Dai, Xianqi [College of Physics and Electronic Engineering, Henan Normal University, Xinxiang, Henan 453007 (China); School of Physics and Electronic Engineering, Zhengzhou Normal University, Zhengzhou, Henan 450044 (China); Jia, Jinfeng [Key Laboratory of Artificial Structures and Quantum Control (Ministry of Education), Collaborative Innovation Center of Advanced Microstructures, Department of Physics and Astronomy, Shanghai Jiaotong University, 800 Dongchuan Road, Shanghai 200240 (China); Xie, Maohai, E-mail: mhxie@hku.hk [Physics Department, The University of Hong Kong, Pokfulam Road (Hong Kong)

2017-02-28

Highlights: • High-index, off c-axis, Bi{sub 2}Se{sub 3} has been grown by molecular beam epitaxy on In{sub 2}Se{sub 3}. • A retarded strain relaxation process in such high-index Bi{sub 2}Se{sub 3} is observed, enabling experimentally probe strain effect on topological insulators. • It has been shown by calculation that the Dirac electrons participate in chemical bonding at the heterointerface. - Abstract: High-index Bi{sub 2}Se{sub 3}(221) film has been grown on In{sub 2}Se{sub 3}-buffered GaAs(001), in which a much retarded strain relaxation dynamics is recorded. The slow strain-relaxation process of in epitaxial Bi{sub 2}Se{sub 3}(221) can be attributed to the layered structure of Bi{sub 2}Se{sub 3} crystal, where the epifilm grown along [221] is like a pile of weakly-coupled quintuple layer slabs stacked side-by-side on substrate. Finally, we reveal strong chemical bonding at the interface of Bi{sub 2}Se{sub 3} and In{sub 2}Se{sub 3} by plotting differential charge contour calculated by first-principle method. This study points to the feasibility of achieving strained TIs for manipulating the properties of topological systems.

Thermally stimulated properties in ZnSe:Tb and ZnSe:(Mn, Tb) phosphors

Science.gov (United States)

Mishra, A. K.; Mishra, S. K.; Pandey, S. P.; Lakshmi Mishra, Kshama

2018-02-01

Thermoluminescence studies were performed of ZnSe:Tb and ZnSe:(Mn, Tb) phosphors. A method of preparation for ZnSe phosphors doped with Tb and (Mn, Tb) has been discussed. The thermoluminescence (TL) properties of these phosphors have been studied from 100 to 370 K temperature after exciting by UV radiation (365 nm) at three uniform heating rates 0.4, 0.6 and 0.9 K/s. The trapping parameters like trap depth, lifetime of electrons and capture cross-section have also been determined using various methods.

Photoluminescence Enhancement and Structure Repairing of Monolayer MoSe 2 by Hydrohalic Acid Treatment

KAUST Repository

Han, Hau-Vei

2015-12-30

Atomically thin two-dimensional transition-metal dichalcogenides (TMDCs) have attracted much attention recently due to their unique electronic and optical properties for future optoelectronic devices. The chemical vapor deposition (CVD) method is able to generate TMDCs layers with a scalable size and a controllable thickness. However, the TMDC monolayers grown by CVD may incorporate structural defects, and it is fundamentally important to understand the relation between photoluminescence and structural defects. In this report, point defects (Se vacancies) and oxidized Se defects in CVD-grown MoSe2 monolayers are identified by transmission electron microscopy and X-ray photoelectron spectroscopy. These defects can significantly trap free charge carriers and localize excitons, leading to the smearing of free band-to-band exciton emission. Here, we report that the simple hydrohalic acid treatment (such as HBr) is able to efficiently suppress the trap-state emission and promote the neutral exciton and trion emission in defective MoSe2 monolayers through the p-doping process, where the overall photoluminescence intensity at room temperature can be enhanced by a factor of 30. We show that HBr treatment is able to activate distinctive trion and free exciton emissions even from highly defective MoSe2 layers. Our results suggest that the HBr treatment not only reduces the n-doping in MoSe2 but also reduces the structural defects. The results provide further insights of the control and tailoring the exciton emission from CVD-grown monolayer TMDCs.

Observation of point defects in impurity-doped zinc selenide films using a monoenergetic positron beam

International Nuclear Information System (INIS)

Miyajima, T.; Okuyama, H.; Akimoto, K.; Mori, Y.; Wei, L.; Tanigawa, S.

1992-01-01

We studied point defects in ZnSe films grown by molecular beam epitaxy using the positron annihilation method. We found that doping with Ga atoms induces vacancy-type defects such as Zn vacancies, and that heavy doping with oxygen atoms induces interstitial type defects. We think that these defects are one of the causes of active carrier saturation in doped ZnSe films. (author)

Ab initio phonon thermal transport in monolayer InSe, GaSe, GaS, and alloys

Energy Technology Data Exchange (ETDEWEB)

Pandey, Tribhuwan; Parker, David S.; Lindsay, Lucas

2017-10-17

We compare vibrational properties and phonon thermal conductivities (κ) of monolayer InSe, GaSe and GaS systems using density functional theory and Peierls-Boltzmann transport methods. In going from InSe to GaSe to GaS, system mass decreases giving both increasing acoustic phonon velocities and decreasing scattering of these heat-carrying modes with optic phonons, ultimately giving κInSe< κGaSe< κGaS. This behavior is demonstrated by correlating the scattering phase space limited by fundamental conservation conditions with mode scattering rates and phonon dispersions for each material. We also show that, unlike flat monolayer systems such as graphene, thermal transport is governed by in-plane vibrations in InSe, GaSe and GaS, similar to buckled monolayer materials such as silicene. Alloying of InSe, GaSe and GaS systems provides an effective method for modulating their κ through intrinsic vibrational modifications and phonon scattering from mass disorder giving reductions ~2-3.5 times. This disorder also suppresses phonon mean free paths in the alloy systems compared to those in their crystalline counterparts. This work provides fundamental insights of lattice thermal transport from basic vibrational properties for an interesting set of two-dimensional materials.

Sample Set (SE): SE59 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available idopsis thaliana (Arabidopsis). However, the behavior of flavonoids during drough...t stress is still not well documented. Herein we investigated the time-series alternation of flavonoids in t...vonoids, a class of specialized metabolites, including flavonols and anthocyanins w...SE59 Alternation of flavonoid accumulation under drought stress in Arabidopsis thaliana We reported that fla

Intercalation compounds of NbSe2 und SnSe2. Model systems for low-dimensional superconductors

International Nuclear Information System (INIS)

Herzinger, Michael

2013-01-01

Quasi-two-dimensional (2D) metal dichalcogenides have received considerable research interest since their complex anisotropic electronic properties can be controlled by the intercalation of donor species. Although layered dichalcogenides have been studied by many aspects of chemical and physical properties, their two-dimensional character is only poorly understood. The present work deals with the layer-shaped dichalcogenides SnSe 2 and NbSe 2 . The host-material SnSe 2 was synthesized by chemical transport with Iodine as transport agent in sealed quartz ampoules. The intercalation of the semiconducting layered single crystals SnSe 2 with the organometallic compound cobaltocene (CoCp 2 ) leads to superconductivity up to T = 8 K. Ex-situ intercalation studies show an intercalation-mechanism outgoing from the host material 2H-SnSe 2 in a stage-2 phase which goes over in a stage-1 phase for higher intercalation degrees. In addition, SnSe 2 {CoCp 2 } x show remarkable low-temperature properties e.g. the coexistence of superconductivity and magnetism in dependence of the staging and cobaltocene-content of the material. Starting from an intercalation degree of 17% CoCp 2 long range ordered magnetism (with increasing saturation magnetization) was observed in 18R-SnSe 2 {CoCp 2 } x . Furthermore SnSe 2 {CoCp 2 } x show an extremely sensitive superconducting pinning behavior in very small magnetic fields partially below B 2 -content. A phase diagram was developed in dependence of the degree of intercalation over the whole range of intercalation between 0 % and 33 %. For comparison of the low-temperature character of SnSe 2 {CoCp 2 } x , another layer-shaped superconductor NbSe 2 was intercalated with CoCp 2 . The layered high-k s-wave superconductor 2H-NbSe 2 belongs to the most prominent low-dimensional materials studied during the past fifty years. After the discovery of the high temperature superconductor MgB 2 , a benchmark system for multi-band superconductivity, NbSe 2

Stochastic Modeling of Sediment Connectivity for Reconstructing Sand Fluxes and Origins in the Unmonitored Se Kong, Se San, and Sre Pok Tributaries of the Mekong River

Science.gov (United States)

Schmitt, R. J. P.; Bizzi, S.; Castelletti, A. F.; Kondolf, G. M.

2018-01-01

Sediment supply to rivers, subsequent fluvial transport, and the resulting sediment connectivity on network scales are often sparsely monitored and subject to major uncertainty. We propose to approach that uncertainty by adopting a stochastic method for modeling network sediment connectivity, which we present for the Se Kong, Se San, and Sre Pok (3S) tributaries of the Mekong. We quantify how unknown properties of sand sources translate into uncertainty regarding network connectivity by running the CASCADE (CAtchment Sediment Connectivity And DElivery) modeling framework in a Monte Carlo approach for 7,500 random realizations. Only a small ensemble of realizations reproduces downstream observations of sand transport. This ensemble presents an inverse stochastic approximation of the magnitude and variability of transport capacity, sediment flux, and grain size distribution of the sediment transported in the network (i.e., upscaling point observations to the entire network). The approximated magnitude of sand delivered from each tributary to the Mekong is controlled by reaches of low transport capacity ("bottlenecks"). These bottlenecks limit the ability to predict transport in the upper parts of the catchment through inverse stochastic approximation, a limitation that could be addressed by targeted monitoring upstream of identified bottlenecks. Nonetheless, bottlenecks also allow a clear partitioning of natural sand deliveries from the 3S to the Mekong, with the Se Kong delivering less (1.9 Mt/yr) and coarser (median grain size: 0.4 mm) sand than the Se San (5.3 Mt/yr, 0.22 mm) and Sre Pok (11 Mt/yr, 0.19 mm).

Indium selenide (In2Se3) thin film for phase-change memory

International Nuclear Information System (INIS)

Lee, Heon; Kang, Dae-Hwan; Tran, Lung

2005-01-01

A cross-point type phase-change random access memory (PRAM) device without an access transistor is successfully fabricated with the In 2 Se 3 -phase-change resistor, which has much higher electrical resistivity than Ge 2 Sb 2 Te 5 and of which electric resistivity can be varied by the factor of 10 5 times, related with the degree of crystallization. Due to its higher electrical resistivity, the switching power can be delivered more effectively. Since In 2 Se 3 is single-phase binary compound, the device failure related to phase decomposition can be avoided. Since the volume of phase change is very limited, and the heating duration is only for few tens of nanoseconds to 10 μs, the transition of In 2 Se 3 -phase-change material is done under very far from its thermodynamic equilibrium condition, and thus, formation of the secondary phases or different crystalline phases was not observed. The static mode switching (dc test) is tested for the 5 μm-sized In 2 Se 3 PRAM device. In the first sweep, the as-grown amorphous In 2 Se 3 resistor showed the high resistance state at low voltage region. However, when it reached the threshold voltage, the electrical resistance of the device was drastically reduced through the formation of an electrically conducting path. The pulsed mode switching of the 5 μm-sized In 2 Se 3 PRAM device shows that the reset (crystalline → amorphous) of the device was done with a 70 ns-3.1 V pulse and the set (amorphous → crystalline) of the device was done with a 10 μs-1.2 V pulse. As high as 100 of switching dynamic range (ratio of R high to R low ) was observed

Intense Visible Luminescence in CdSe Quantum Dots by Efficiency Surface Passivation with H2O Molecules

Directory of Open Access Journals (Sweden)

Hyeoung Woo Park

2012-01-01

Full Text Available We have investigated the effect of water (H2O cooling and heat treatment on the luminescence efficiency of core CdSe quantum dots (QDs. The photoluminescence (PL quantum yield of the CdSe QDs was enhanced up to ~85%, and some periodic bright points were observed in wide color ranges during the heat treatment of QDs mixed with H2O. The PL enhancement of QDs could be attributed to the recovery of QDs surface traps by unreacted ligands confined within the hydrophilic H2O molecule containers.

IR and Raman spectra of LaH(SeO3)2 and FeH(SeO3)2

International Nuclear Information System (INIS)

Ratheesh, R.; Suresh, G.; Nayar, V.U.; Morris, R.E.

1995-01-01

The infrared and Raman spectra of LaH(SeO 3 ) 2 and FeH(SeO 3 ) 2 crystals are recorded and analysed. Bands confirm the coexistence of HSeO 3 - and SeO 3 2- ions in both LaH(SeO 3 ) 2 and FeH(SeO 3 ) 2 crystals. The Se-OH stretching vibrations are observed to be at lower wavenumbers in LaH(SeO 3 ) 2 than that in the iron compound in agreement with the short O-O distance in the former. Observed bands indicate that the SeO 3 2- ions are more angularly distorted in FeH(SeO 3 ) 2 crystal. ABC bands, characteristic of strong hydrogen bonded systems are observed in the infrared spectra of both the crystals. (author). 15 refs., 2 figs., 1 tab

Observation of unusual critical region behavior in the magnetic susceptibility of EuSe

Science.gov (United States)

Bykovetz, N.; Klein, J.; Lin, C. L.

2018-05-01

The Europium Chalcogenides (EuCh: EuO, EuS, EuSe, and EuTe) have been regarded as model examples of simple, cubic, Heisenberg exchange coupled magnetic systems, with a ferromagnetic nearest-neighbor exchange constant J1 and an antiferromagnetic next-nearest-neighbor constant J2. Unlike the other EuCh, EuSe exhibits a range of complex magnetic behaviors, the latter being attributed to EuSe being near the point where J2=-J1, where its magnetism appears to consist of nearly de-coupled 2D ferromagnetic sheets. Analysis of precision SQUID measurements of the magnetic susceptibility χ in EuSe showed that in the region from ˜Tc to ˜2Tc, a fit of the data to the critical equation χ = χ2Tc(T/Tc-1)-γ gives γ=2.0, an exponent not predicted by any current theory. Additionally, this fit predicts that Tc should be ˜0K. We tentatively interpret this by saying that in the paramagnetic region the system "thinks" EuSe should not order above T=0. Tc=0K is predicted by the Mermin-Wagner theorem (MW) for Heisenberg-coupled 2D magnetic systems, and we can show that when J2=-J1, MW can also be applied to the J1, J2 exchange model of the EuCh to give a rigorous Tc=0 prediction. Under 10 kbar applied pressure EuSe exhibits a different γ and fitted Tc. An additional, and rather strange, critical-region effect was discovered. The EuSe sample was found to exhibit a relaxation effect in a small range of temperatures, just above and just below the actual Tc of 4.7K, with time constants of up to 5 minutes. We cannot yet fully explain this observed macroscopic effect.

Simultaneous speciation of arsenic (As(III), MMA, DMA, and As(V)) and selenium (Se(IV), Se(VI), and SeCN{sup -}) in petroleum refinery aqueous streams

Energy Technology Data Exchange (ETDEWEB)

Tonietto, Gisele B.; Godoy, Jose M.; Oliveira, Ana Cristina [Pontificia Universidade Catolica do Rio de Janeiro, Rio de Janeiro, RJ (Brazil); Souza, Marcia V. de [Petrobras/Cenpes, Research and Development Center, Rio de Janeiro (Brazil)

2010-07-15

High-performance liquid chromatography (HPLC) coupled to an ICP-MS with an octapole reaction system (ORS) has been used to carry out quantitative speciation of selenium (Se) and arsenic (As) in the stream waters of a refining process. The argon dimers interfering with the {sup 78}Se and {sup 80}Se isotopes were suppressed by pressurizing the octapole chamber with 3.1 mL min{sup -1} H{sub 2} and 0.5 mL min{sup -1} He. Four arsenic species arsenite - As(III), arsenate (As(V)), monomethylarsonic acid (MMA), and dimethylarsinic acid (DMA) - and three inorganic Se species - selenite Se(IV), selenate Se(VI), and selenocyanate (SeCN{sup -}) - were separated in a single run by ion chromatography (IC) using gradient elution with 100 mmol L{sup -1} NH{sub 4}NO{sub 3}, pH 8.5, adjusted by addition of NH{sub 3}, as eluent. Repeatabilities of peak position and of peak area evaluation were better than 1% and about 3%, respectively. Detection limits (as 3{sigma} of the baseline noise) were 81, 56, and 75 ng L{sup -1} for Se(IV), Se(VI), and SeCN{sup -}, respectively, and 22, 19, 25, and 16 ng L{sup -1} for As(III), As(V), MMA, and DMA, respectively. Calibration curve R {sup 2} values ranged between 0.996 and 0.999 for the arsenic and selenium species. Column recovery for ion chromatography was calculated to be 97 {+-} 6% for combined arsenic species and 98 {+-} 3% for combined selenium species. Because certified reference materials for As and Se speciation studies are still not commercially available, in order to check accuracy and precision the method was applied to certified reference materials, BCR 714, BCR 1714, and BCR 715 and to two different refinery samples - inlet and outlet wastewater. The method was successfully used to study the quantitative speciation of selenium and arsenic in petroleum refinery wastewaters. (orig.)

Third-order nonlinear optical properties of GeSe2-Ga2Se3-PbI2 glasses

International Nuclear Information System (INIS)

Tang Gao; Liu Cunming; Luo Lan; Chen Wei

2010-01-01

The third-order nonlinear optical (NLO) properties of new selenium-based GeSe 2 -Ga 2 Se 3 -PbI 2 glasses have been measured using the optical Kerr effect (OKE) technique, with picosecond and femtosecond laser pulses. The 0.70GeSe 2 -0.15Ga 2 Se 3 -0.15PbI 2 glass has the largest third-order optical nonlinear susceptibility in GeSe 2 -Ga 2 Se 3 -PbI 2 glass system with χ (3) of 5.28x10 12 esu. In addition, the response time of glasses is sub-picosecond, which is predominantly associated with electron cloud. Local structure of the glasses has been identified by using Raman studies, while the origins of the observed nonlinear optical response are discussed. The [Ge(Ga)Se 4 ] tetrahedral and lone-pair electrons from highly polarizable Pb atom in glasses play an important role in enhanced NLO response. These results as well as their good chemical stability indicate that GeSe 2 -Ga 2 Se 3 -PbI 2 glasses are promising materials for photonic applications of third-order nonlinear optical signal processing.

Formation of clusters and the percolation threshold in a two-phase system with a random distribution of ZnSe quantum points

Science.gov (United States)

Bondar', N. V.

2009-03-01

A characteristic feature due to the formation of a percolation phase transition of carriers has been observed in a two-phase system consisting of borosilicate glass with ZnSe quantum dots. For near-threshold quantum-dot concentrations, changes due to microscopic fluctuations of the quantum-dot density have been observed in the intensities of radiation emission bands. This phenomenon is reminiscent of critical opalescence, where similar fluctuations of the density of a pure substance arise near a phase transition. It is proposed that the dielectric mismatch between the matrix and ZnSe plays a large role in the carrier (exciton) delocalization, resulting in the appearance of a "dielectric trap" on the interface and the formation there of surface states of excitons. The spatial overlapping of states which occurs at the critical concentration of quantum dots results in carrier tunneling and the appearance of a percolation transition in such a system.

Reconstruction of Band Structure Induced by Electronic Nematicity in an FeSe Superconductor

Science.gov (United States)

Nakayama, K.; Miyata, Y.; Phan, G. N.; Sato, T.; Tanabe, Y.; Urata, T.; Tanigaki, K.; Takahashi, T.

2014-12-01

We have performed high-resolution angle-resolved photoemission spectroscopy on an FeSe superconductor (Tc˜8 K ), which exhibits a tetragonal-to-orthorhombic structural transition at Ts˜90 K . At low temperature, we found splitting of the energy bands as large as 50 meV at the M point in the Brillouin zone, likely caused by the formation of electronically driven nematic states. This band splitting persists up to T ˜110 K , slightly above Ts, suggesting that the structural transition is triggered by the electronic nematicity. We have also revealed that at low temperature the band splitting gives rise to a van Hove singularity within 5 meV of the Fermi energy. The present result strongly suggests that this unusual electronic state is responsible for the unconventional superconductivity in FeSe.

First principles simulation on the K0.8Fe2Se2 high-temperature structural superconductor

International Nuclear Information System (INIS)

Guo, Rui; Yang, Shizhong; Khosravi, Ebrahim; Zhao, Guang-Lin; Bagayoko, Diola

2013-01-01

Highlights: • The superconductor K 0.8 Fe 2 Se 2 super cell size, shape, and atomic positions are fully optimized using first principles density functional theory method. • Each K atom donates 0.8 |e| with K vacancies in the supercell, each Fe atom donates 0.4 |e|, while each Se atom gains 0.7 |e| ∼ 0.8 |e|. • Fe atoms show magnetic moment fluctuation and possible strong spin-orbital coupling. -- Abstract: Since the synthesis of the first ones in 2008, iron-based high temperature superconductors have been the subject of many studies. This great interest is partly due to their higher, upper magnetic field, smaller Fermi surface around the Γ point, and a larger coherence length. This work is focused on A x Fe 2 Se 2 structural superconductor (FeSe, 11 hierarchy; A = K, Cs) as recently observed. ARPES data show novel, electronic structure and a hole-free Fermi surface which is different from previously observed Fermi surface images. We use ab initio density functional theory method to simulate the electronic structure of the novel superconductor A x Fe 2 Se 2 . We compare this electronic structure with those of other Fe-based superconductors

Electronic Structure, Irreversibility Line and Magnetoresistance of Cu_0_._3Bi_2Se_3 Superconductor

International Nuclear Information System (INIS)

Yi He-Mian; Chen Chao-Yu; Sun Xuan; Xie Zhuo-Jin; Feng Ya; Liang Ai-Ji; Peng Ying-Ying; He Shao-Long; Zhao Lin; Liu Guo-Dong; Dong Xiao-Li; Zhang Jun; Zhou Xing-Jiang; Chen Chuang-Tian; Xu Zu-Yan; Gu Gen-Da

2015-01-01

Cu_xBi_2Se_3 is a superconductor that is a potential candidate for topological superconductors. We report our laser-based angle-resolved photoemission measurement on the electronic structure of the Cu_xBi_2Se_3 superconductor, and a detailed magneto-resistance measurement in both normal and superconducting states. We find that the topological surface state of the pristine Bi_2Se_3 topological insulator remains robust after the Cu-intercalation, while the Dirac cone location moves downward due to electron doping. Detailed measurements on the magnetic field-dependence of the resistance in the superconducting state establishes an irreversibility line and gives a value of the upper critical field at zero temperature of ∼4000 Oe for the Cu_0_._3Bi_2Se_3 superconductor with a middle point T_c of 1.9K. The relation between the upper critical field H_c_2 and temperature T is different from the usual scaling relation found in cuprates and in other kinds of superconductors. Small positive magneto-resistance is observed in Cu_0_._3Bi_2Se_3 superconductors up to room temperature. These observations provide useful information for further study of this possible candidate for topological superconductors. (paper)

Enhancement of hole mobility in InSe monolayer via an InSe and black phosphorus heterostructure.

Science.gov (United States)

Ding, Yi-Min; Shi, Jun-Jie; Xia, Congxin; Zhang, Min; Du, Juan; Huang, Pu; Wu, Meng; Wang, Hui; Cen, Yu-Lang; Pan, Shu-Hang

2017-10-05

To enhance the low hole mobility (∼40 cm 2 V -1 s -1 ) of InSe monolayer, a novel two-dimensional (2D) van der Waals heterostructure made of InSe and black phosphorus (BP) monolayers with high hole mobility (∼10 3 cm 2 V -1 s -1 ) has been constructed and its structural and electronic properties are investigated using first-principles calculations. We find that the InSe/BP heterostructure exhibits a direct band gap of 1.39 eV and type-II band alignment with electrons (holes) located in the InSe (BP) layer. The band offsets of InSe and BP are 0.78 eV for the conduction band minimum and 0.86 eV for the valence band maximum, respectively. Surprisingly, the hole mobility in the InSe/BP heterostructure exceeds 10 4 cm 2 V -1 s -1 , which is one order of magnitude larger than the hole mobility of BP and three orders larger than that of the InSe monolayer. The electron mobility is also increased to 3 × 10 3 cm 2 V -1 s -1 . The physical reason has been analyzed deeply, and a universal method is proposed to improve the carrier mobility of 2D materials by forming heterostructures with them and other 2D materials with complementary properties. The InSe/BP heterostructure can thus be widely used in nanoscale InSe-based field-effect transistors, photodetectors and photovoltaic devices due to its type-II band alignment and high carrier mobility.

Complexing in (NH4)2SeO4-UO2SeO4 H2O system

International Nuclear Information System (INIS)

Serezhkina, L.B.

1994-01-01

Isotherm of solubility in the (NH 4 ) 2 SeO 4 -UO 2 SeO 4 -H 2 O system has been constructed at 25 deg C. (NH 4 ) 2 (UO 2 ) 2 (SeO 4 ) 3 x6H 2 O formation is established for the first time and certain its physicochemical properties are determined. Regularities of complexing in the R 2 Se) 4 -UO 2 SeO 4 -H 2 O systems, where R-univalent cation are under discussion. 6 refs.; 3 tabs

Flexible one-dimensional carbon-selenium composite nanofibers with superior electrochemical performance for Li-Se/Na-Se batteries

Science.gov (United States)

Zeng, Linchao; Wei, Xiang; Wang, Jiaqing; Jiang, Yu; Li, Weihan; Yu, Yan

2015-05-01

A facile strategy is developed to synthesis selenium/carbon composites (Se@CNFs-CNT) by co-heating Se powder and electrospun Polyacrylonitrile (PAN)-CNT nanofibers at 600°Cin a sealed vessel. The Se molecules are chemically bonded and physical encapsulated by carbonized PAN-CNT composite (CNFs-CNT), which leads to prevent the dissolution of polyselenide intermediates in carbonate based electrolyte. When directly used as flexible free-standing cathode material for Li-Se batteries in low cost carbonate-based electrolyte, the Se@CNFs-CNT electrode exhibits improved cyclability (517 mAh g-1 after 500 cycles at 0.5 A g-1) and rate capability (485 mAh g-1 at 1 A g-1). Moreover, when tested as sodium batteries, it maintains a reversible capacity of 410 mAh g-1 after 240 cycles at 0.5 A g-1. The superior electrochemical performance (especially at high rates) of Se@CNFs-CNT is attributed to synergistic effect of the additive of CNT, the well confine of Se in the CNFs-CNT matrix through chemical bonding and the 3D interconnected carbon nanofibers (CNFs). This simple yet efficient process thus provides a promising route towards fabrication of a variety of high performance flexible Li-Se and Na-Se batteries.

Achieving tunable doping of MoSe2 based devices using GO@MoSe2 heterostructure

Science.gov (United States)

Maji, Tuhin Kumar; Tiwary, Krishna Kanhaiya; Karmakar, Debjani

2017-05-01

Doping nature of MoSe2, one of the promising Graphene analogous device material, can be tuned by controlling the concentration of functional groups in Graphene oxide (GO)@MoSe2 heterostructure. In this study, by first-principles simulation, we have observed that GO can be used as a carrier injection layer for MoSe2, where n or p type carriers are introduced within MoSe2 layer depending on the type and concentration of functional moieties in it. Both n and p-type Schottky barrier height modulations are investigated for different modeled configurations of the heterostructure. This combinatorial heterostructure can be a promising material for future electronic device application.

Formation of a Colloidal CdSe and ZnSe Quantum Dots via a Gamma Radiolytic Technique

Directory of Open Access Journals (Sweden)

Aeshah Salem

2016-09-01

Full Text Available Colloidal cadmium selenide (CdSe and zinc selenide (ZnSe quantum dots with a hexagonal structure were synthesized by irradiating an aqueous solution containing metal precursors, poly (vinyl pyrrolidone, isopropyl alcohol, and organic solvents with 1.25-MeV gamma rays at a dose of 120 kGy. The radiolytic processes occurring in water result in the nucleation of particles, which leads to the growth of the quantum dots. The physical properties of the CdSe and ZnSe nanoparticles were measured by various characterization techniques. X-ray diffraction (XRD was used to confirm the nanocrystalline structure, energy-dispersive X-ray spectroscopy (EDX was used to estimate the material composition of the samples, transmission electron microscopy (TEM was used to determine the morphologies and average particle size distribution, and UV-visible spectroscopy was used to measure the optical absorption spectra, from which the band gap of the CdSe and ZnSe nanoparticles could be deduced.

Dipole strength in 80Se below the neutron-separation energy for the nuclear transmutation of 79Se

Directory of Open Access Journals (Sweden)

Makinaga Ayano

2017-01-01

Full Text Available The γ-ray strength function (γSF in 80Se is an important parameter to estimate the neutron-capture cross section of 79Se which is one of the long-lived fission products (LLFPs. Until now, the γSF method was applied for 80Se only above the neutron-separation energy (Sn and the evaluated 79Se(n,γ cross section has an instability caused by the GSF below Sn. We studied the dipole-strength distribution of 80Se in a photon-scattering experiment using bremsstrahlung produced by an electron beam of an energy of 11.5 MeV at the linear accelerator ELBE at HZDR. The present photoabsorption cross section of 80Se was combined with results of (γ,n experiments and are compared with predictions usinmg the TALYS code. We also estimated the 79Se(n,γ cross sections and compare them with TALYS predictionms and earlier work by other groups.

Dipole strength in 80Se below the neutron-separation energy for the nuclear transmutation of 79Se

Science.gov (United States)

Makinaga, Ayano; Massarczyk, Ralph; Beard, Mary; Schwengner, Ronald; Otsu, Hideaki; Müller, Stefan; Röder, Marko; Schmidt, Konrad; Wagner, Andreas

2017-09-01

The γ-ray strength function (γSF) in 80Se is an important parameter to estimate the neutron-capture cross section of 79Se which is one of the long-lived fission products (LLFPs). Until now, the γSF method was applied for 80Se only above the neutron-separation energy (Sn) and the evaluated 79Se(n,γ) cross section has an instability caused by the GSF below Sn. We studied the dipole-strength distribution of 80Se in a photon-scattering experiment using bremsstrahlung produced by an electron beam of an energy of 11.5 MeV at the linear accelerator ELBE at HZDR. The present photoabsorption cross section of 80Se was combined with results of (γ,n) experiments and are compared with predictions usinmg the TALYS code. We also estimated the 79Se(n,γ) cross sections and compare them with TALYS predictionms and earlier work by other groups.

Fundamental absorption edge in CuIn5Se8 and CuGa3Se5 single crystals

International Nuclear Information System (INIS)

Leon, M.; Merino, J.M.; Levcenko, S.; Nateprov, A.; Tezlevan, V.; Arushanov, E.; Syrbu, N.N.

2006-01-01

Optical absorption spectra of CuIn 5 Se 8 and CuGa 3 Se 5 single crystals have been investigated. The energy gap E g for CuIn 5 Se 8 (CuGa 3 Se 5 ) was found to be varied from 1.27(1.79) to 1.21(1.71) eV in the temperature range between 10 and 300 K. The temperature dependence of E g was studied by means of the Einstein model and the Paessler model. The Einstein temperature {222(267)K}, the Debye temperature {310(380)K}, a dimensionless constant related to the electron-phonon coupling {1.62(2.65)} as well as an effective energy {20 (24) meV} and a cut-off phonon energy {35(39) meV} have been estimated for CuIn 5 Se 8 (CuGa 3 Se 5 ). It was also found that the major contribution of phonons to the shift of E g versus temperature in CuIn 5 Se 8 (CuGa 3 Se 5 ) is mainly from optical phonons. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (Abstract Copyright [2006], Wiley Periodicals, Inc.)

Origin of n-type conductivity in two-dimensional InSe: In atoms from surface adsorption and van der Waals gap

Science.gov (United States)

Wang, Hui; Shi, Jun-jie; Huang, Pu; Ding, Yi-min; Wu, Meng; Cen, Yu-lang; Yu, Tongjun

2018-04-01

Recently, two-dimensional (2D) InSe nanosheet becomes a promising material for electronic and optoelectronic nano-devices due to its excellent electron transport, wide bandgap tunability and good metal contact. The inevitable native point defects are essential in determining its characteristics and device performance. Here we investigate the defect formation energy and thermodynamic transition levels for the most important native defects and clarify the physical origin of n-type conductivity in unintentionally doped 2D InSe by using the powerful first-principles calculations. We find that both surface In adatom and Se vacancy are the key defects, and the In adatom, donated 0.65 electrons to the host, causes the n-type conductivity in monolayer InSe under In-rich conditions. For bilayer or few-layer InSe, the In interstitial within the van der Waals gap, transferred 0.68 electrons to InSe, is found to be the most stable donor defect, which dominates the n-type character. Our results are significant for understanding the defect nature of 2D InSe and improving the related nano-device performance.

Charge confinements in CdSe-ZnSe symmetric double quantum wells

International Nuclear Information System (INIS)

Tit, Nacir; Obaidat, Ihab M

2008-01-01

The bound states in the (CdSe) N w (ZnSe) N b (CdSe) N w -ZnSe(001) symmetric double quantum wells are investigated versus the well width (N w ) and the barrier thickness (N b ). A calculation based on the sp 3 s * tight-binding method which includes the spin-orbit interactions is employed to calculate the bandgap energy, quantum-confinement energy, and band structures. The studied systems possess a vanishing valence-band offset (VBO = 0) in consistency with the well known common-anion rule, and a large conduction-band offset (CBO ≅ 1 eV), which plays an essential role in the confinement of electrons within the CdSe wells. The biaxial strain, on the other hand, plays another role in confining the holes at the interfaces (within the well regions) and thus enhancing the radiative efficiency. The induced-strain energy is estimated to be ∼35 meV. More importantly, the results show that, for a fixed barrier thickness, the double wells are able to confine a pair of bound states when they are very thin. By increasing the wells' width (N w ), further, a new pair of states from the conduction-band continuum falls into the wells every time N w hits a multiple of four monolayers (more specifically, for 4n w ≤4(n+1), the number of bound states is 2(n+1), where n is an integer). On the other hand, the barrier thickness (N b ) is shown to have no effect on the number of bound states, but it solely controls their well-to-well interactions. A critical barrier thickness to switch off these latter interactions is estimated to occur at about N crit b ≅ 9 (L crit b ≅ 25∼AA. Rules governing the variation of the quantum-confinement energy versus both barrier thickness (N b ) and well width (N w ) have been derived. Our theoretical results are also shown to have excellent agreement with the available experimental photoluminescence data

AgSbSe{sub 2} and AgSb(S,Se){sub 2} thin films for photovoltaic applications

Energy Technology Data Exchange (ETDEWEB)

Garza, J.G. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Shaji, S. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Facultad de Ingenieria Mecanica y Electrica, CIIDIT - Universidad Autonoma de Nuevo Leon, Apodaca, Nuevo Leon (Mexico); Rodriguez, A.C.; Das Roy, T.K. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Krishnan, B., E-mail: kbindu_k@yahoo.com [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Facultad de Ingenieria Mecanica y Electrica, CIIDIT - Universidad Autonoma de Nuevo Leon, Apodaca, Nuevo Leon (Mexico)

2011-10-01

Silver antimony selenide (AgSbSe{sub 2}) thin films were prepared by heating sequentially deposited multilayers of antimony sulphide (Sb{sub 2}S{sub 3}), silver selenide (Ag{sub 2}Se), selenium (Se) and silver (Ag). Sb{sub 2}S{sub 3} thin film was prepared from a chemical bath containing SbCl{sub 3} and Na{sub 2}S{sub 2}O{sub 3}, Ag{sub 2}Se from a solution containing AgNO{sub 3} and Na{sub 2}SeSO{sub 3} and Se thin films from an acidified solution of Na{sub 2}SeSO{sub 3}, at room temperature on glass substrates. Ag thin film was deposited by thermal evaporation. The annealing temperature was 350 deg. C in vacuum (10{sup -3} Torr) for 1 h. X-ray diffraction analysis showed that the thin films formed were polycrystalline AgSbSe{sub 2} or AgSb(S,Se){sub 2} depending on selenium content in the precursor films. Morphology and elemental analysis of these films were done using scanning electron microscopy and energy dispersive X-ray spectroscopy. Optical band gap was evaluated from the UV-visible absorption spectra of these films. Electrical characterizations were done using Hall effect and photocurrent measurements. A photovoltaic structure: glass/ITO/CdS/AgSbSe{sub 2}/Al was formed, in which CdS was deposited by chemical bath deposition. J-V characteristics of this structure showed V{sub oc} = 435 mV and J{sub sc} = 0.08 mA/cm{sup 2} under illumination using a tungsten halogen lamp. Preparation of a photovoltaic structure using AgSbSe{sub 2} as an absorber material by a non-toxic selenization process is achieved.

Porøse materialer

DEFF Research Database (Denmark)

Hansen, Ernst Jan de Place

2000-01-01

Dette undervisningsnotat er en samling af noter, der refererer til den indledende del af kurset Materialmekanik og Porøse materailer på Insitut for Bærende Konstruktiner og Materialer (BKM).......Dette undervisningsnotat er en samling af noter, der refererer til den indledende del af kurset Materialmekanik og Porøse materailer på Insitut for Bærende Konstruktiner og Materialer (BKM)....

Effect of dietary sodium selenite, Se-enriched yeast and Se-enriched Chlorella on egg Se concentration, physical parameters of eggs and laying hen production

Czech Academy of Sciences Publication Activity Database

Skřivan, M.; Šimáně, J.; Dlouhá, G.; Doucha, Jiří

2006-01-01

Roč. 51, č. 4 (2006), s. 163-167 ISSN 1212-1819 Institutional research plan: CEZ:AV0Z50200510 Keywords : sodium selenite * se-yeast * se-chlorella Subject RIV: EE - Microbiology, Virology Impact factor: 0.421, year: 2006

Effect of the ITO substrate on the growth of Cu(In,Ga)Se{sub 2}, CuGa{sub 3}Se{sub 5}, CuGa{sub 5}Se{sub 8} and CuIn{sub 3}Se{sub 5} thin films by flash evaporation

Energy Technology Data Exchange (ETDEWEB)

Friedrich, E J; Merino, J M; Leon, M [Department of Applied Physics, Universidad Autonoma de Madrid (UAM), Cantoblanco, 28049 Madrid (Spain); Trigo, J F; Guillen, C [Department of Energy, CIEMAT, Avda Complutense, 22, 28040 Madrid (Spain); Ramiro, J, E-mail: josue.friedrich@uam.e [Department of Theory of Signal and Communications, URJC, Campus Fuenlabrada, 122, 28943 Madrid (Spain)

2009-04-21

Structural, compositional, electrical and morphological properties of CuIn{sub 1-x}Ga{sub x}Se{sub 2} (x = 0.15, 0.30) and ordered defect compounds (ODC) CuGa{sub 3}Se{sub 5}, CuGa{sub 5}Se{sub 8}, CuIn{sub 3}Se{sub 5} thin films grown by flash evaporation onto soda lime glass substrates (SLG) and ITO/SLG have been studied. Polycrystalline thin films with accentuated preferential orientation in the (1 1 2) plane of the tetragonal structure have been obtained. Annealing in Se atmosphere improves the structural, morphological, electrical and optical properties of the evaporated films, but provokes the formation of a CuIn{sub x}Se{sub y} phase on the surface of the films. Band gap values ranging between 1.01 and 1.21 eV have been obtained for the as-grown CuIn{sub 1-x}Ga{sub x}Se{sub 2} thin films and between 1.09 and 2.01 eV for the CuGa{sub 3}Se{sub 5}, CuGa{sub 5}Se{sub 8} and CuIn{sub 3}Se{sub 5} thin films.

Topological Phase Transition in Layered GaS and GaSe

KAUST Repository

Zhu, Zhiyong; Cheng, Yingchun; Schwingenschlö gl, Udo

2012-01-01

By fully relativistic first principles calculations, we predict that appropriate strain engineering of layered GaX (X=S, Se) leads to a new class of three-dimensional topological insulators with an excitation gap of up to 135 meV. Our results provide a new perspective on the formation of three-dimensional topological insulators. Band inversion can be induced by strain only, without considering any spin-orbit coupling. The latter, however, is indispensable for the formation of local band gaps at the crossing points of the inverted bands. Our study indicates that three-dimensional topological insulators can also be realized in materials which comprise light elements only.

Topological Phase Transition in Layered GaS and GaSe

KAUST Repository

Zhu, Zhiyong

2012-06-29

By fully relativistic first principles calculations, we predict that appropriate strain engineering of layered GaX (X=S, Se) leads to a new class of three-dimensional topological insulators with an excitation gap of up to 135 meV. Our results provide a new perspective on the formation of three-dimensional topological insulators. Band inversion can be induced by strain only, without considering any spin-orbit coupling. The latter, however, is indispensable for the formation of local band gaps at the crossing points of the inverted bands. Our study indicates that three-dimensional topological insulators can also be realized in materials which comprise light elements only.

Cu(InGa)Se{sub 2} absorber formation by in-situ, low-temperature annealing of co-evaporated bilayer (InGa){sub 2}Se{sub 3}/CuSe precursors

Energy Technology Data Exchange (ETDEWEB)

Moon, Kyeongchan; Kim, Woo Kyoung, E-mail: wkim@ynu.ac.kr

2015-12-01

Chalcopyrite Cu(InGa)Se{sub 2} (CIGS) absorbers were fabricated by the formation of bilayer stacked glass/Mo/(InGa){sub 2}Se{sub 3}/CuSe precursors followed by in-situ thermal annealing at 450 °C for approximately 10 min in a vacuum evaporator. The material properties (e.g., crystal orientation, compositional depth profile, and overall composition) and device performance of the resulting CIGS absorbers were compared with those of the CIGS absorbers formed by conventional 1-stage and 3-stage CIGS formation processes at a similar temperature. X-ray diffraction confirmed that the 1-stage co-evaporation and in-situ annealing of the bilayer precursor produced a polycrystalline CIGS absorber without a specific texture, whereas the CIGS absorber formed by the 3-stage process showed a highly (220) preferred orientation. Secondary ion mass spectrometry revealed Ga accumulation at the bottom of CIGS formed by in-situ annealing of the bilayer precursors. The cell efficiency of the device with the CIGS absorber formed by the in-situ, low-temperature (450 °C) annealing of bilayer stacked glass/Mo/(InGa){sub 2}Se{sub 3}/CuSe precursors was comparable to that produced by the conventional 3-stage process at a similar temperature. - Highlights: • Annealing of (InGa){sub 2}Se{sub 3}/CuSe precursors was compared with coevaporation process. • In-situ annealing of (InGa){sub 2}Se{sub 3}/CuSe precursors at 450 °C produced about 9% solar cell. • Ga profile within Cu(InGa)Se{sub 2} depended on process profile during co-evaporation.

Short and medium range structures of 80GeSe2–20Ga2Se3 chalcogenide glasses

Science.gov (United States)

Petracovschi, Elena; Calvez, Laurent; Cormier, Laurent; Le Coq, David; Du, Jincheng

2018-05-01

The short and medium range structures of 80GeSe2–20Ga2Se3 (or Ge23.5Ga11.8Se64.7) chalcogenide glasses have been studied by combining ab initio molecular dynamics (AIMD) simulations and experimental neutron diffraction studies. The structure factor and total correlation function were calculated from glass structures generated from AIMD simulations and compared with neutron diffraction experiments showing reasonable agreement. The atomic structures of ternary chalcogenide glasses were analyzed in detail, and it was found that gallium atoms are four-fold coordinated by selenium (Se) and form [GaSe4] tetrahedra. Germanium atoms on average also have four-fold coordination, among which Se is 3.5 with the remaining being Ge–Ge homo-nuclear bonds. Ga and Ge tetrahedra link together mainly through corner-sharing and some edge-sharing of Se. No homo-nuclear bonds were observed among Ga atoms or between Ge and Ga. In addition, Se–Se homo-nuclear bonds and Se chains with various lengths were observed. A small fraction of Se atom triclusters that bond to three cations of Ge and Ga were also observed, confirming earlier proposals from 77Se solid state nuclear magnetic resonance studies. Furthermore, the electronic structures of ternary chalcogenide glasses were studied in terms of atomic charge and electronic density of states in order to gain insights into the chemical bonding and electronic properties, as well as to provide an explanation of the observed atomic structures in these ternary chalcogenide glasses.

Absorption Spectra of CuGaSe2 and CuInSe2 Semiconducting Nanoclusters

KAUST Repository

Mokkath, Junais Habeeb; Singh, Nirpendra; Schwingenschlö gl, Udo

2015-01-01

The structural and optical properties of the chalcopyrite CunGanSe2n and CunInnSe2n nanoclusters (n = 2, 4, 6, and 8) are investigated as a function of the size using a combination of basin-hopping global optimization and time-dependent density

Assessment of the anticancer compounds Se-methylselenocysteine and glucosinolates in Se-biofortified broccoli (Brassica oleracea L. var. italica) sprouts and florets.

Science.gov (United States)

Ávila, Fabricio William; Faquin, Valdemar; Yang, Yong; Ramos, Silvio Junio; Guilherme, Luiz Roberto G; Thannhauser, Theodore W; Li, Li

2013-07-03

Broccoli (Brassica oleracea L. var. italica) is a rich source of chemopreventive compounds. Here, we evaluated and compared the effect of selenium (Se) treatment on the accumulation of anticancer compounds Se-methylselenocysteine (SeMSCys) and glucosinolates in broccoli sprouts and florets. Total Se and SeMSCys content in sprouts increased concomitantly with increasing Se doses. Selenate was superior to selenite in inducing total Se accumulation, but selenite is equally effective as selenate in promoting SeMSCys synthesis in sprouts. Increasing sulfur doses reduced total Se and SeMSCys content in sprouts treated with selenate, but not in those with selenite. Examination of five broccoli cultivars reveals that sprouts generally have better fractional ability than florets to convert inorganic Se into SeMSCys. Distinctive glucosinolate profiles between sprouts and florets were observed, and sprouts contained approximately 6-fold more glucoraphanin than florets. In contrast to florets, glucosinolate content was not affected by Se treatment in sprouts. Thus, Se-enriched broccoli sprouts are excellent for simultaneous accumulation of chemopreventive compounds SeMSCys and glucoraphanin.

Enhanced thermoelectric properties of N-type polycrystalline In4Se3-x compounds via thermally induced Se deficiency

Science.gov (United States)

Zhao, Ran; Shu, Yu-Tian; Guo, Fu

2014-03-01

In4Se3-x compound is considered as a potential thermoelectric material due to its comparably low thermal conductivity among all existing ones. While most studies investigated In4Se3-x thermoelectric properties by controlling selennium or other dopants concentrations, in the current study, it was found that even for a fixed initial In/Se ratio, the resulting In/Se ratio varied significantly with different thermal processing histories (i.e., melting and annealing), which also resulted in varied thermoelectric properties as well as fracture surface morphologies of In4Se3-x polycrystalline specimens. Single phase polycrystalline In4Se3-x compounds were synthesized by combining a sequence of melting, annealing, pulverizing, and spark plasma sintering. The extension of previous thermal history was observed to significantly improve the electrical conductivity (about 121%) and figure of merit (about 53%) of In4Se3-x polycrystalline compounds. The extended thermal history resulted in the increase of Se deficiency (x) from 0.39 to 0.53. This thermally induced Se deficiency was observed to associate with increasing carrier mobility but decreasing concentration, which differs from the general trend observed for the initially adjusted Se deficiency at room temperature. Unusually large dispersed grains with nanosize layers were observed in specimens with the longest thermal history. The mechanism(s) by which previous thermal processing enhances carrier mobility and affect microstructural evolution are briefly discussed.

Effect of Silver Doping on Transport Properties of Bi2Se3: AgxBi2Se3 and Bi2-xAgxSe3

Science.gov (United States)

Zhang, Min; Wei, Zhan-Tao

2018-03-01

Ag-doped Bi2Se3 with the formula AgxBi2Se3 and Bi2-xAgxSe3 were prepared and their electrical and magnetic transport properties have been investigated to study the influence of silver doping on transport properties of Bi2Se3 with different Ag-doped method. All samples exhibited metallic resistivity and the resistivity increased with increasing Ag concentration. The lattice parameter c of Ag-substituted and Ag-intercalated samples displays a contrary change as the Ag concentration increased. For the Ag-intercalated samples, both the resistance upturn were observed in the curves of temperature dependent of resistivity and temperature dependent of magnetoresistance, respectively, indicating that the enhanced surface effect was obtained in those samples. Monotonously, field-induced MR peaks around 200 K were also observed in those samples. Similar behaviors were not observed in the Ag-substituted samples.

Effect of Silver Doping on Transport Properties of Bi2Se3: AgxBi2Se3 and Bi2-xAgxSe3

Science.gov (United States)

Zhang, Min; Wei, Zhan-Tao

2018-05-01

Ag-doped Bi2Se3 with the formula AgxBi2Se3 and Bi2-xAgxSe3 were prepared and their electrical and magnetic transport properties have been investigated to study the influence of silver doping on transport properties of Bi2Se3 with different Ag-doped method. All samples exhibited metallic resistivity and the resistivity increased with increasing Ag concentration. The lattice parameter c of Ag-substituted and Ag-intercalated samples displays a contrary change as the Ag concentration increased. For the Ag-intercalated samples, both the resistance upturn were observed in the curves of temperature dependent of resistivity and temperature dependent of magnetoresistance, respectively, indicating that the enhanced surface effect was obtained in those samples. Monotonously, field-induced MR peaks around 200 K were also observed in those samples. Similar behaviors were not observed in the Ag-substituted samples.

Formation of ZnSe/Bi2Se3 QDs by surface cation exchange and high photothermal conversion

Directory of Open Access Journals (Sweden)

Guozhi Jia

2015-08-01

Full Text Available Water-dispersed core/shell structure ZnSe/Bi2Se3 quantum dots were synthesized by ultrasonicwave-assisted cation exchange reaction. Only surface Zn ion can be replaced by Bi ion in ZnSe quantum dots, which lead to the ultrathin Bi2Se3 shell layer formed. It is significance to find to change the crystal of QDs due to the acting of ultrasonicwave. Cation exchange mechanism and excellent photothermal conversion properties are discussed in detail.

Dissipative N-point-vortex Models in the Plane

Science.gov (United States)

Shashikanth, Banavara N.

2010-02-01

A method is presented for constructing point vortex models in the plane that dissipate the Hamiltonian function at any prescribed rate and yet conserve the level sets of the invariants of the Hamiltonian model arising from the SE (2) symmetries. The method is purely geometric in that it uses the level sets of the Hamiltonian and the invariants to construct the dissipative field and is based on elementary classical geometry in ℝ3. Extension to higher-dimensional spaces, such as the point vortex phase space, is done using exterior algebra. The method is in fact general enough to apply to any smooth finite-dimensional system with conserved quantities, and, for certain special cases, the dissipative vector field constructed can be associated with an appropriately defined double Nambu-Poisson bracket. The most interesting feature of this method is that it allows for an infinite sequence of such dissipative vector fields to be constructed by repeated application of a symmetric linear operator (matrix) at each point of the intersection of the level sets.

Density functional study of BiSbTeSe{sub 2} topological insulator thin films

Energy Technology Data Exchange (ETDEWEB)

Mohammadpourrad, Zahra; Abolhassani, Mohammadreza [Department of Physics, Science and Research Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of)

2017-08-15

In this work, using density functional theory calculations, we have investigated the band topology of bulk BiSbTeSe{sub 2} and its thin film electronic properties in several thicknesses. It is one member of the quaternary compounds Bi{sub 2-x}Sb{sub x}Te{sub 3-y}Se{sub y} (BSTS) with the best intrinsic bulk insulating behavior. Based on our calculations we have found that a band inversion at Γ-point is induced when spin-orbit coupling is turned on, with an energy gap of about 0.318 eV. The film thickness has an effect on the surface states such that a gap opens at Dirac point in 6 quintuple-layers film and with decrease in thickness, the magnitude of the gap increases. The atomic contributions have been mapped out for the first few layers of thin films to demonstrate the surface states. The relative charge density has been calculated layer-wise and the penetration depth of the surface states into the bulk region is found to be about 2.5-3.5 quintuple layers, depending on the termination species of thin films. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Absorption Spectra of CuGaSe2 and CuInSe2 Semiconducting Nanoclusters

KAUST Repository

Mokkath, Junais Habeeb

2015-10-01

The structural and optical properties of the chalcopyrite CunGanSe2n and CunInnSe2n nanoclusters (n = 2, 4, 6, and 8) are investigated as a function of the size using a combination of basin-hopping global optimization and time-dependent density functional theory. Although the lowest energy structures are found to show almost random geometries, the band gaps and absorption spectra still are subject to systematic blue shifts for decreasing cluster size in the case of CunGanSe2n, indicating strong electron confinement. The applicability of the nanoclusters in photovoltaics is discussed. © 2015 American Chemical Society.

Die tema van God se spraak in Hebreërs se inleidingsformules

Directory of Open Access Journals (Sweden)

Albert J. Coetsee

2015-03-01

Full Text Available Alhoewel die voorkoms en gebruik van die Ou Testament in die meeste navorsing oor Hebreërs besonder baie aandag geniet, is dit nie die geval met die Hebreërskrywer se gebruik van inleidingsformules vir sy Ou-Testamentiese aanhalings nie. Die gevolg is dat daar tot op hede betreklik min selfstandige navorsing oor die Hebreërskrywer se tema van God se spraak by sy inleidingsformules gedoen is. In hierdie artikel word Hebreërs se inleidingsformules in besonderhede nagegaan om te bepaal wat die aard en inhoud van die Hebreërskrywer se verwysings na die tema van God se spraak in sy inleidingsformules is. Daar word onder andere bepaal dat Hebreërs 38 direkte aanhalings vanuit die Ou Testament bevat, dat die Hebreërskrywer, met slegs een uitsondering, elke inleidingsformule met ’n werkwoord van sêinlei, dat ’n Persoon van die Drie-eenheid in 34 van die 38 direkte aanhalings (± 89% die onderwerp en gevolglike Spreker van die Ou-Testamentiese woorde is, dat die Hebreërskrywer al drie Persone van die Drie-eenheid as God beskou, en dat die Hebreërskrywer oortuig is dat die Ou Testament geïnspireer is en God se geldige en relevante openbaring bly. The theme of God’s speech in Hebrews’ introduction formulae. Whilst the occurance and function of the Old Testament in research on Hebrews enjoys a lot of attention, this is not the case for the writer of Hebrews’ use of introduction formulae for his Old Testament quotations. The result is that up to date relatively few independent studies have been made on the writer of Hebrews’ theme of God’s speech in his introduction formulae. In this article the introduction formulae in Hebrews are researched in detail to determine the nature and content of the writer of Hebrews’ reference to the theme of God’s speech in his introduction formulae. Amongst other things it is determined that Hebrews has 38 direct quotations from the Old Testament, that with the exception of one

SE debt restructuring plan

International Nuclear Information System (INIS)

Janoska, J.

2003-01-01

Slovenske elektrarne, a.s. (SE) plans to restructure one's own debts in 2003-2005. Debt restructuring plan is following: 2003: Collection of pre-payment on electricity - 60 million Euro (2.5 billion Slovak crowns), consumer unknown. Own promissory notes in total value of 100 million US$ (3.5 billion Slovak crowns) - in process. Sale of claims worth 2.4 billion Slovak crowns (57.21 million Euro) - negotiations in process. 2003/2004: Restructuring of loans payable IV. quarter 2003 and at the beginning of 2004 in value of 200 million Euro (8.3 billion Slovak crowns). Aim of SE is a new credit payable within 7 years, with instalments payable in the last two to three without any state subsidies. 2005: Loans worth 460 million Euro (189 billion Slovak crowns) will still remain. SE want to negotiate them with banks without state support

Sample Set (SE): SE47 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE47 Metabolomic correlation-network modules in Arabidopsis based on a graph-cluste...as a system. Typical metabolomics data show a few but significant correlations among metabolite levels when ...itions. Although several studies have assessed topologies in metabolomic correlation networks, it remains un... (mto1), and transparent testa4 (tt4) to compare systematically the metabolomic correlation...s in samples of roots and aerial parts. We then applied graph clustering to the constructed correlation

Polytypism and band alignment in ZnSe nanowires revealed by photoluminescence spectroscopy of embedded (Zn,Cd)Se quantum dots

Science.gov (United States)

Bieker, S.; Pfeuffer, R.; Kiessling, T.; Tarakina, N.; Schumacher, C.; Ossau, W.; Molenkamp, L. W.; Karczewski, G.

2015-03-01

We report on the optical characterization of single (Zn,Cd)Se quantum dots (QDs) embedded in vapor-liquid-solid-grown ZnSe nanowires (NWs). The temperature dependent quenching of the QD luminescence demonstrates that their electronic structure is comparable to that of self-assembled (Zn,Cd)Se QDs in ZnSe matrices. The photoluminescence excitation (PLE) spectrum of single nanowire QDs reveals the presence of both zinc blende (ZB) and wurtzite (WZ) crystal modifications of ZnSe in the NW shafts. PLE provides, therefore, a complementary technique to transmission electron microscopy imaging to reveal polytypism in ZnSe NWs. A transient quenching of the PL emission suggests a type II staggered band alignment at the ZB/WZ interface in our ZnSe NWs.

CdSe/ZnSe quantum dot structures grown by molecular beam epitaxy with a CdTe submonolayer stressor

International Nuclear Information System (INIS)

Sedova, I. V.; Lyublinskaya, O. G.; Sorokin, S. V.; Sitnikova, A. A.; Toropov, A. A.; Donatini, F.; Dang, Si Le; Ivanov, S. V.

2007-01-01

A procedure for formation of CdSe quantum dots (QDs) in a ZnSe matrix is suggested. The procedure is based on the introduction of a CdTe submonolayer stressor deposited on the matrix surface just before deposition of the material of the QDs. (For CdTe/ZnSe structure, the relative lattice mismatch is Δa/a ∼ 14%.) The stressor forms small strained islands at the ZnSe surface, thus producing local fields of high elastic stresses controlling the process of the self-assembling of the QDs. According to the data of transmission electron microscopy, this procedure allows a considerable increase in the surface density of QDs, with a certain decrease in their lateral dimensions (down to 4.5 ± 1.5 nm). In the photoluminescence spectra, a noticeable (∼150 meV) shift of the peak to longer wavelengths from the position of the reference CdSe/ZnSe QD structure is observed. The shift is due to some transformation of the morphology of the QDs and an increase in the Cd content in the QDs. Comprehensive studies of the nanostructures by recording and analyzing the excitation spectra of photoluminescence, the time-resolved photoluminescence spectra, and the cathodoluminescence spectra show that the emission spectra involve two types of optical transitions, namely, the type-I transitions in the CdSeTe/ZnSe QDs and the type-II transitions caused mainly by the low cadmium content (Zn,Cd)(Se,Te)/ZnSe layer formed between the QDs

Effective mRNA Inhibition in PANC-1 Cells in Vitro Mediated via an mPEG-SeSe-PEI Delivery System.

Science.gov (United States)

Zhang, Yuefeng; Yang, Bin; Liu, Yajie; Qin, Wenjie; Li, Chao; Wang, Lantian; Zheng, Wen; Wu, Yulian

2016-05-01

RNA interference (RNAi)-mediated gene therapy is a promising approach to cure various diseases. However, developing an effective, safe, specific RNAi delivery system remains a major challenge. In this study, a novel redox-responsive polyetherimide (PEI)-based nanovector, mPEG-SeSe-PEI, was developed and its efficacy evaluated. We prepared three mPEG-SeSe-PEI vector candidates for small interfering glyceraldehyde-3-phosphate dehydrogenase (siGADPH) and determined their physiochemical properties and transfection efficiency using flow cytometry and PEG11.6-SeSe-PEI polymer. We investigated the silencing efficacy of GADPH mRNA expression in PANC-1 cells and observed that PEG11.6-SeSe-PEI/siGADPH (N/P ratio=10) polyplexes possessed the appropriate size and zeta-potential and exhibited excellent in vitro gene silencing effects with the least cytotoxicity in PANC-1 cells. In conclusion, we present PEG11.6-SeSe-PEI as a potential therapeutic gene delivery system for small interfering RNA (siRNA).

Negative ion photoelectron spectroscopy of SeO-

International Nuclear Information System (INIS)

Coe, J.V.; Snodgrass, J.T.; Freidhoff, C.B.; McHugh, K.M.; Bowen, K.H.

1985-01-01

Negative ion photoelectron spectroscopy (NIPES) involves a kinetic energy analysis of electrons which are photodetached when a mass selected beam of negative ions is crossed with a fixed frequency laser beam. The photodetachment spectra of SeO - displays transitions from the X 2 PI state of SeO - to both the X 3 Σ - and a 1 Δ states of SeO. The singlet-triplet splitting of SeO is readily observable since selection rules regarding spin do not apply in the bound to free state process of photodetachment. The electron affinity of SeO and the negative ion potential parameters of SeO - have been determined

Syntheses, structures, and properties of Ag4(Mo2O5)(SeO4)2(SeO3) and Ag2(MoO3)3SeO3

International Nuclear Information System (INIS)

Ling Jie; Albrecht-Schmitt, Thomas E.

2007-01-01

Ag 4 (Mo 2 O 5 )(SeO 4 ) 2 (SeO 3 ) has been synthesized by reacting AgNO 3 , MoO 3 , and selenic acid under mild hydrothermal conditions. The structure of this compound consists of cis-MoO 2 2+ molybdenyl units that are bridged to neighboring molybdenyl moieties by selenate anions and by a bridging oxo anion. These dimeric units are joined by selenite anions to yield zigzag one-dimensional chains that extended down the c-axis. Individual chains are polar with the C 2 distortion of the Mo(VI) octahedra aligning on one side of each chain. However, the overall structure is centrosymmetric because neighboring chains have opposite alignment of the C 2 distortion. Upon heating Ag 4 (Mo 2 O 5 )(SeO 4 ) 2 (SeO 3 ) looses SeO 2 in two distinct steps to yield Ag 2 MoO 4 . Crystallographic data: (193 K; MoKα, λ=0.71073 A): orthorhombic, space group Pbcm, a=5.6557(3), b=15.8904(7), c=15.7938(7) A, V=1419.41(12), Z=4, R(F)=2.72% for 121 parameters with 1829 reflections with I>2σ(I). Ag 2 (MoO 3 ) 3 SeO 3 was synthesized by reacting AgNO 3 with MoO 3 , SeO 2 , and HF under hydrothermal conditions. The structure of Ag 2 (MoO 3 ) 3 SeO 3 consists of three crystallographically unique Mo(VI) centers that are in 2+2+2 coordination environments with two long, two intermediate, and two short bonds. These MoO 6 units are connected to form a molybdenyl ribbon that extends along the c-axis. These ribbons are further connected together through tridentate selenite anions to form two-dimensional layers in the [bc] plane. Crystallographic data: (193 K; MoKα, λ=0.71073 A): monoclinic, space group P2 1 /n, a=7.7034(5), b=11.1485(8), c=12.7500(9) A, β=105.018(1) V=1002.7(2), Z=4, R(F)=3.45% for 164 parameters with 2454 reflections with I>2σ(I). Ag 2 (MoO 3 ) 3 SeO 3 decomposes to Ag 2 Mo 3 O 10 on heating above 550 deg. C. - Graphical abstract: A view of the one-dimensional [(Mo 2 O 5 )(SeO 4 ) 2 (SeO 3 )] 4- chains that extend down the c-axis in the structure of Ag 4 (Mo 2 O 5 )(SeO 4

Flux synthesis, modulated crystal structures, and physical properties of REMn0.5SeO (RE = La, Ce)

International Nuclear Information System (INIS)

Peschke, Simon; Johrendt, Dirk; Nitsche, Fabian

2015-01-01

The selenide oxides REMn 0.5 SeO (RE = La, Ce) were synthesized by heating RE 2 O 3 , RE, Mn, and Se in a NaI/KI flux at 800 C, and their modulated crystal structures determined by X-ray single crystal and powder diffraction {P 1 1 2/n(αβ1/2)0s, Z = 2, LaMn 0.5 SeO: a = 405.7(1), b = 405.7(1), c = 915.2(1) pm, γ = 90 , q = [1/10, -1/10, 1/2]; CeMn 0.5 SeO: a = 402.0(1), b = 401.8(1), c = 910.7(1) pm, γ = 90.000(4) , q = [0.0789(2), -0.0783(2), 1/2]}. The structures are related to the ZrCuSiAs-type structure with ordered vacancies at the manganese sites. The resulting modulations of the checkerboard pattern in the [Mn 0.5 Se] layers can be approximated by 10a x 10b x 2c and 51a x 51b x 2c supercells in LaMn 0.5 SeO and CeMn 0.5 SeO, respectively. Both compounds are insulators. The optical bandgap of LaMn 0.5 SeO was determined to 2.13 eV from the Kubelka-Munk function. Magnetic measurements indicate antiferromagnetic ordering of the Mn 2+ moments with Neel points well above room temperature, as known from related manganese compounds. (Copyright copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Pulsed laser deposited heterogeneous mixture of Li2Se-Sb2Se3 nanocomposite as a new storage lithium material

International Nuclear Information System (INIS)

Yu Le; Chen Jie; Fu Zhengwen

2010-01-01

Li 2 Se-Sb 2 Se 3 nanocomposites with a highly heterogeneous mixture have been fabricated by reactive pulsed laser deposition method. The electrochemical properties of the as-deposited Li 2 Se-Sb 2 Se 3 thin film during the first charging and discharging have been investigated by the galvanostatic cycling and cyclic voltammetry measurements for the first time. By using ex situ X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and selected-area electron diffraction (SAED) measurements, the decomposition of Li 2 Se driven by Sb 2 Se 3 under the electrochemical potential is revealed. In the first cycle, the oxidation peaks at 2.5 V and 3.2 V and the reduction peaks at 2.0 V can be attributed to the decomposition and formation of Li 2 Se with the conversion reaction of Sb 2 Se 3 into Sb 2 Se 5 . Our findings demonstrate that nanocomposite Li 2 Se-Sb 2 Se 3 can possess very high electrochemical activity. These results present a special case of solid-state heterogeneous electrochemistry with both nanostructured binary materials.

Structure family and polymorphous phase transition in the compounds with soft sublattice: Cu{sub 2}Se as an example

Energy Technology Data Exchange (ETDEWEB)

Qiu, Wujie [Department of Physics, East China Normal University, Shanghai 200241 (China); State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); Lu, Ping; Yuan, Xun; Liu, Huili; Shi, Xun; Chen, Lidong [State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); CAS Key Laboratory of Energy conversion Materials, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); Xu, Fangfang; Wu, Lihua [State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); Ke, Xuezhi, E-mail: wqzhang@mail.sic.ac.cn, E-mail: xzke@phy.ecnu.edu.cn, E-mail: jihuiy@uw.edu [Department of Physics, East China Normal University, Shanghai 200241 (China); Yang, Jiong [Materials Genome Institute, Shanghai University, Shanghai 200444 (China); Yang, Jihui, E-mail: wqzhang@mail.sic.ac.cn, E-mail: xzke@phy.ecnu.edu.cn, E-mail: jihuiy@uw.edu [Materials Science and Engineering Department, University of Washington, Seattle, Washington 98195 (United States); Zhang, Wenqing, E-mail: wqzhang@mail.sic.ac.cn, E-mail: xzke@phy.ecnu.edu.cn, E-mail: jihuiy@uw.edu [State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); Materials Genome Institute, Shanghai University, Shanghai 200444 (China)

2016-05-21

Quite a few interesting but controversial phenomena, such as simple chemical composition but complex structures, well-defined high-temperature cubic structure but intriguing phase transition, coexist in Cu{sub 2}Se, originating from the relatively rigid Se framework and “soft” Cu sublattice. However, the electrical transport properties are almost uninfluenced by such complex substructures, which make Cu{sub 2}Se a promising high-performance thermoelectric compound with extremely low thermal conductivity and good power factor. Our work reveals that the crystal structure of Cu{sub 2}Se at the temperature below the phase-transition point (∼400 K) should have a group of candidate structures that all contain a Se-dominated face-centered-cubic-like layered framework but nearly random site occupancy of atoms from the “soft” Cu sublattice. The energy differences among those structures are very low, implying the coexistence of various structures and thus an intrinsic structure complexity with a Se-based framework. Detailed analyses indicate that observed structures should be a random stacking of those representative structure units. The transition energy barriers between each two of those structures are estimated to be zero, leading to a polymorphous phase transition of Cu{sub 2}Se at increasing temperature. Those are all consistent with experimental observations.

Influence of Bi, Se and Te additions on the formation temperature of MgB₂

DEFF Research Database (Denmark)

Grivel, Jean-Claude; Andersen, Niels Hessel; Pallewatta, P. G. Asanka Pramod

2012-01-01

The formation of the MgB2 superconducting compound from a mixture of Mg and amorphous B powders with various low melting point metals (Bi, Se and Te) was studied in situ by means of high-energy (synchrotron) x-ray diffraction in wires with a composite Cu/Nb sheath. In comparison with an undoped s...

Surface Passivation of CdSe Quantum Dots in All Inorganic Amorphous Solid by Forming Cd1-xZnxSe Shell.

Science.gov (United States)

Xia, Mengling; Liu, Chao; Zhao, Zhiyong; Wang, Jing; Lin, Changgui; Xu, Yinsheng; Heo, Jong; Dai, Shixun; Han, Jianjun; Zhao, Xiujian

2017-02-07

CdSe quantum dots (QDs) doped glasses have been widely investigated for optical filters, LED color converter and other optical emitters. Unlike CdSe QDs in solution, it is difficult to passivate the surface defects of CdSe QDs in glass matrix, which strongly suppress its intrinsic emission. In this study, surface passivation of CdSe quantum dots (QDs) by Cd 1-x Zn x Se shell in silicate glass was reported. An increase in the Se/Cd ratio can lead to the partial passivation of the surface states and appearance of the intrinsic emission of CdSe QDs. Optimizing the heat-treatment condition promotes the incorporation of Zn into CdSe QDs and results in the quenching of the defect emission. Formation of CdSe/Cd 1-x Zn x Se core/graded shell QDs is evidenced by the experimental results of TEM and Raman spectroscopy. Realization of the surface passivation and intrinsic emission of II-VI QDs may facilitate the wide applications of QDs doped all inorganic amorphous materials.

Role of heat treatment on structural and optical properties of thermally evaporated Ga{sub 10}Se{sub 81}Pb{sub 9} chalcogenide thin films

Energy Technology Data Exchange (ETDEWEB)

El-Sebaii, A.A., E-mail: ahmedelsebaii@yahoo.com [Department of Physics, Faculty of Science, King Abdulaziz University, 80203 Jeddah 21589 (Saudi Arabia); Khan, Shamshad A. [Department of Physics, St. Andrews College, Gorakhpur 273001 (India); Al-Marzouki, F.M.; Faidah, A.S.; Al-Ghamdi, A.A. [Department of Physics, Faculty of Science, King Abdulaziz University, 80203 Jeddah 21589 (Saudi Arabia)

2012-08-15

Amorphous chalcogenides, based on Se, have become materials of commercial importance and were widely used for optical storage media. The present work deals with the structural and optical properties of Ga{sub 10}Se{sub 81}Pb{sub 9} ternary chalcogenide glass prepared by melt quenching technique. The glass transition, crystallization and melting temperatures of the synthesized glass were measured by non-isothermal DSC measurements at a constant heating rate of 30 K/min. Thin films of thickness 4000 A were prepared by thermal evaporation techniques on glass/Si (1 0 0) wafer substrate. These thin films were thermally annealed for two hours at three different annealing temperatures of 345, 360 and 375 K, which were in between the glass transition and crystallization temperatures of the Ga{sub 10}Se{sub 81}Pb{sub 9} glass. The structural, morphological and optical properties of as-prepared and annealed thin films were studied. Analysis of the optical absorption data showed that the rules of the non-direct transitions predominate. It was also found that the optical band gap decreases while the absorption coefficient, refractive index and extinction coefficient increase with increasing the annealing temperature. Due to the higher values of absorption coefficient and annealing dependence of the optical band gap and optical constants, the investigated material could be used for optical storage. - Highlights: Black-Right-Pointing-Pointer Annealing effect on structure and optical band gap has been investigated. Black-Right-Pointing-Pointer The amorphous nature has been verified by x-ray diffraction and DSC measurements. Black-Right-Pointing-Pointer Thermal annealing causes a decrease in optical band gap in Ga{sub 10}Se{sub 81}Pb{sub 9} thin films. Black-Right-Pointing-Pointer The decrease in optical band gap can be interpreted on the basis of amorphous-crystalline phase transformation. Black-Right-Pointing-Pointer Optical absorption data showed that the rules of the non

Phase diagrams of novel Tl{sub 4}SnSe{sub 4}–TlSbSe{sub 2}–Tl{sub 2}SnSe{sub 3} quasi-ternary system following DTA and X-ray diffraction

Energy Technology Data Exchange (ETDEWEB)

Barchiy, I.E.; Tatzkar, A.R. [Department of Chemistry, Uzhgorod National University, Pidgirna St., 46, Uzhgorod 88000 (Ukraine); Fedorchuk, A.O. [Department of Inorganic and Organic Chemistry, Lviv National University of Veterinary Medicine and Biotechnologies, Pekarska St., 50, Lviv 79010 (Ukraine); Plucinski, K., E-mail: kpluc2006@wp.pl [Electronics Department, Military University Technology, Warsaw, Kaliskiego 2, Warsaw 00-908 (Poland)

2016-06-25

Phase relation in the Tl{sub 4}SnSe{sub 4}–TlSbSe{sub 2}–Tl{sub 2}SnSe{sub 3} quasiternary system were studied by the DTA and X-ray diffraction in combination with mathematical modeling. The phase diagrams of the Tl{sub 4}SnSe{sub 4}–TlSbSe{sub 2} and Tl{sub 2}SnSe{sub 3}–TlSbSe{sub 2} systems, the perspective views of the phase interaction in the ternary system, the liquidus surface projection, the isothermal section at 423 K were built for the first time. The Tl{sub 4}SnSe{sub 4}–TlSbSe{sub 2}–Tl{sub 2}SnSe{sub 3} system is of the invariant eutectic type and is characterized by the formation of limited solid solutions following initial ternary compounds. New complex compounds are not formed. - Highlights: • Two Tl{sub 4}SnSe{sub 4}–TlSbSe{sub 2},Tl{sub 2}SnSe{sub 3}–TlSbSe{sub 2} systems were explored. • Invariant processes in the ternary system were determined. • New complex compounds were not observed in ternary system.

Two anionically derivatized scandium oxoselenates(IV): ScF[SeO3] and Sc2O2[SeO3

Science.gov (United States)

Greiner, Stefan; Chou, Sheng-Chun; Schleid, Thomas

2017-02-01

Scandium fluoride oxoselenate(IV) ScF[SeO3] and scandium oxide oxoselenate(IV) Sc2O2[SeO3] could be synthesized through solid-state reactions. ScF[SeO3] was obtained phase-pure, by reacting mixtures of Sc2O3, ScF3 and SeO2 (molar ratio: 1:1:3) together with CsBr as fluxing agent in corundum crucibles embedded into evacuated glassy silica ampoules after firing at 700 °C for seven days. Sc2O2[SeO3] first emerged as by-product during the attempts to synthesize ScCl[SeO3] following aforementioned synthesis route and could later be reproduced from appropriate Sc2O3/SeO3 mixtures. ScF[SeO3] crystallizes monoclinically in space group P21/m with a=406.43(2), b =661.09(4), c=632.35(4) pm, β=93.298(3)° and Z=2. Sc2O2[SeO3] also crystallizes in the monoclinic system, but in space group P21/n with a=786.02(6), b=527.98(4), c=1086.11(8) pm, β=108.672(3)° for Z=4. The crystal structures of both compounds are strongly influenced by the stereochemically active lone pairs of the ψ1-tetrahedral [SeO3]2- anions. They also show partial structures, where the derivatizing F- or O2- anions play an important role. For ScF[SeO3] chains of the composition 2+∞ 1[FS c 2 / 2 ] form from connected [FSc2]5+ dumbbells, while [OSc3]7+ pyramids and [OSc4]10+ tetrahedra units are condensed to layers according to 2+ ∞ 2[O2Sc2 ] in Sc2O2[SeO3].

Possibility of using BeMgZnSe as a new cladding material for ZnSe-based blue laser diodes

International Nuclear Information System (INIS)

Kim, D. C.; Choi, J. H.; Yoo, K. H.; Kim, T. W.; Yao, T.

1999-01-01

We calculated the gain and the radiative recombination current density of ZnSe/Be x Mg y Zn 1-x-y Se/Be x Mg y Zn 1-x - y Se separate confinement heterostructure (SCH) laser diodes and compared the results with those for the more popular ZnSe/Zn 1-x Mg x S y Se 1-y /Zn 1-x Mg x S y Se 1-y system. For five different values of the cladding-layer energy gap (E g,c ), we sought the optimum SCH structure that had a minimum threshold current density for both quaternaries, and we compared the corresponding current densities. For the same E g,c , ZnMgSSe was found to have a smaller threshold current density. The threshold current density decreased rapidly with increasing. E g,c in both materials. Therefore, if the available energy gap of the BeMgZnSe cladding is larger than that of ZnMGZnSSe, BeMgZnSe may be the better choice

« Se sentir vivant » : quels enjeux d’éducation biologique ?

Directory of Open Access Journals (Sweden)

Coquidé Maryline

2015-01-01

Full Text Available Avec un point de vue didactique, je discute des enjeux d’éducation biologique de « se sentir vivant ». Je distingue des perspectives d’enseignement de la biologie avec ceux d’éducation biologique, en reprenant ce que nos collègues allemands désignent par le concept Bildung. Je centre ensuite ma réflexion sur le corps et l’expérience vécue, la perception et la signification, en privilégiant un point de vue phénoménologique. Cette analyse est mise à l’épreuve selon trois approches du vivant: le vivant comme réduction, comme extension puis comme relations.

Cs2UPd3Se6

Directory of Open Access Journals (Sweden)

George N. Oh

2011-02-01

Full Text Available Dicaesium uranium(IV tripalladium(II hexaselenide, Cs2UPd3Se6, crystallizes in the space group Fmmm in the Ba2NaCu3O6 structure type. The asymmetric unit comprises the following atoms with site symmetries as shown: U1 (mm2, Cs1 (222, Cs2 (m2m, Pd1 (.m., Pd2 (2mm, Se1 (m.., and Se2 (1. This layered structure contains six edge-sharing square-planar [PdSe4] units that form a hexagon. These, in turn, edge-share with [USe6] trigonal–prismatic units, forming an extended layer parallel to (010. The layers are stacked along [010]. They are staggered, and are separated by the Cs atoms. The Cs atoms are either coordinated in a square antiprism of Se atoms or are ten-coordinate, with one square face and the opposite face hexagonal.

C-type Nd2Se3

Directory of Open Access Journals (Sweden)

2009-03-01

Full Text Available The title compound, neodymium sesquiselenide, is isotypic with the other known rare-earth metal(III selenides M2Se3 (M = La–Pr and Sm–Lu with the cubic C-type structure. It adopts a cation-defective Th3P4-type arrangement with close to 8/9 of the unique neodymium-cation site occupied, leading to the composition Nd2.667Se4 (Z = 4 or Nd2Se3 (Z = 5.333, respectively. The Nd3+ cations are thus surrounded by eight selenide anions, forming trigonal [NdSe8]13− dodecahedra, whereas the Se2− anions exhibit a sixfold coordination, but due to the under-occupation of neodymium, each one is statistically surrounded by only 5.333 cations. The crystal studied was a merohedral twin with a 0.31 (6:0.69 (6 domain ratio.

Effects of the copper content on the structural and electrical properties of Cu{sub 2}ZnSnSe{sub 4} bulks

Energy Technology Data Exchange (ETDEWEB)

Tsega, Moges, E-mail: mogestsega@yahoo.com [Department of Physics, University of the Free State (Qwaqwa Campus), Private Bag X13, Phuthaditjhaba 9866 (South Africa); Department of Physics, Bahir Dar University (Ethiopia); Dejene, F.B.; Koao, L.F. [Department of Physics, University of the Free State (Qwaqwa Campus), Private Bag X13, Phuthaditjhaba 9866 (South Africa)

2016-01-01

We have investigated the concept of defect in Cu{sub x}ZnSnSe{sub 4} (x=1.6–2.0) and Cu{sub y}(Zn{sub 0.9}Sn{sub 1.1})Se{sub 4} (y= 1.6–2.0) bulks prepared by liquid-phase sintering at 600 °C for 2 h with soluble sintering aids of Sb{sub 2}S{sub 3} and Te. All samples were found to exhibit p-type semiconductor for Cu{sub x}ZnSnSe{sub 4}, while n-type of behavior obtained at y= 1.8–2.0 for Cu{sub y}(Zn{sub 0.9}Sn{sub 1.1})Se{sub 4} pellets. The Cu vacancy acts as an acceptor point defect to form the p-type semiconductor, and Sn{sup 4+} acts as a donor to form the n-type behavior for the Sn-rich CZTSe. SEM images of pellets show dense surface morphology, and increase in grain size upon Cu inclusion. The largely increased Hall mobility and the slightly changed carrier concentration for Cu{sub y}(Zn{sub 0.9}Sn{sub 1.1})Se{sub 4} with increasing the Cu content is related to the types of its defects. At y=2.0 with carrier concentration of 4.88×10{sup 17} cm{sup −3} showed the highest mobility of around 58 cm{sup 2}/V s. Based upon the proposed point defects, the CZTSe property can be consistently explained.

E-beam irradiation effect on CdSe/ZnSe QD formation by MBE: deep level transient spectroscopy and cathodoluminescence studies

International Nuclear Information System (INIS)

Kozlovsky, V I; Litvinov, V G; Sadofyev, Yu G

2004-01-01

CdSe/ZnSe structures containing 1 or 15 thin (3-5 monolayers) CdSe layers were studied by cathodoluminescence (CL) and deep level transient spectroscopy (DLTS). The DLTS spectra consisted of peaks from deep levels (DLs) and an additional intense peak due to electron emission from the ground quantized level in the CdSe layers. Activation energy of this additional peak correlated with an energy of the CdSe-layer emission line in the CL spectra. Electron-beam irradiation of the structure during the growth process was found to influence the DLTS and CL spectra of the CdSe layers, shifting the CdSe-layer emission line to the long-wave side. The obtained results are explained using the assumption that e-beam irradiation stimulates the formation of quantum dots of various sizes in the CdSe layers

¿ Como se hace una Telenovela ?

Directory of Open Access Journals (Sweden)

Iván Gavaldón

2015-01-01

Full Text Available La autora relata la historia de las Relaciones Públicas y dice que surgieron y se desarrollaron para legitimar ante el público los intereses económicos y políticos de quienes detentan el poder. Se cuestiona sobre el por qué no aplicar las relaciones públicas, en organizaciones populares, para que mejoren su publicación y orienten sus propósitos de desarrollo. El tema que aborda las Políticas culturales en América Latina acopia un extracto de lo más trascendente de los ensayos del libro editado por Néstor García Canclini. Sobre la telenovela se afirma que esta ha llegado a ser uno de los instrumentos más importantes de la comunicación popular: por ella desfilan las identidades de las más variadas culturas brasileñas. Y en cuanto a la caricatura se relata lo que ocurrió en el Seminario taller " Caricatura y Periodismo", realizado el(9-11 de Nov.- 1987 en el CIESPAL. El estudio sobre el mercado del vídeo se ve dificultado por la imprecisión de los datos obtenidos. Los datos oficiales no siempre se aproximan a la realidad, pues el mercado de vídeo se instauró en América Latina partiendo de una lógica totalmente diversa de los equipos de sonido e imagen.

Facile fabrication of CNTs@C@MoSe2@Se hybrids with amorphous structure for high performance anode in lithium-ion batteries.

Science.gov (United States)

Jin, Rencheng; Cui, Yuming; Wang, Qingyao; Li, Guihua

2017-12-15

Amorphous MoSe 2 and Se anchored on amorphous carbon coated multiwalled carbon nanotubes (CNTs@C@MoSe 2 @Se) have been synthesized by a facile solvothermal strategy. The one dimensional CNTs@C@MoSe 2 @Se can effectively buffer the volume variation, prohibit the aggregation and facilitate electron and ion transport throughout the electrode. Furthermore, the combination of MoSe 2 and Se also provides buffer spaces for the volumetric change during cycling. Thus, the obtained CNTs@C@MoSe 2 @Se hybrids display the enhanced cycle stability and excellent high rate capacity. The reversible capacity of 1010mAhg -1 can be achieved after 100 cycles at the current density of 0.1Ag -1 . Even after 500 cycles, a reversible capacity of 508mAhg -1 is still retained at 5Ag -1 . Copyright © 2017 Elsevier Inc. All rights reserved.

PbSe Quantum Well VECSEL on Si

Science.gov (United States)

Fill, M.; Khiar, A.; Rahim, M.; Felder, F.; Zogg, H.

2011-12-01

Vertical external cavity surface emitting lasers in the wavelength region from 3-5 μm are presented. They are based on PbSe quantum wells grown on Si substrates. As host material Pb1-xEuxSe and Pb1-xSrxSe are used. With Pb1-xSrxSe as host material maximum operation temperatures of 325 K are achieved, while with Pb1-xEuxSe an operation temperature of 245 K could not be overcome. This may be explained by a band alignment transition from type I to type II with increasing temperature.

Investigation of short and ballistic coupling in vertical NbSe2 - graphene - NbSe2 Josephson junctions

Science.gov (United States)

Kim, Minsoo; Park, Geon-Hyoung; Yi, Jongyoon; Lee, Jae Hyeong; Park, Jinho; Lee, Hu-Jong

2H-NbSe2 is a layered two-dimensional superconducting material, which can be constructed into a van der Waals heterostructure with versatile functionality. Here we fabricated a vertically stacked NbSe2 - graphene - NbSe2 heterostructure by the dry transfer technique, where defect-free contact via van der Waals force provides the high interfacial transparency. Insertion of an atomically thin graphene layer between two NbSe2 flakes ensures the formation of highly coherent proximity Josephson coupling. Observed temperature dependence of the junction critical current (Ic) and large value of IcRn product (as large as 2.3ΔNbSe 2) reveal the short and ballistic Josephson coupling characteristics. Large junction critical current density of 104 A/cm2, multiple Andreev reflection in the subgap structure of the differential conductance, and magnetic field modulation of Ic also suggest the strong Josephson coupling via the graphene layer.

PHEIFFER SE TAALPOLITIEK JC Steyn

African Journals Online (AJOL)

sigself maak tog nie Chomsky se teorie oor n aangebore taalaanleg en die konsekwensie daarvan nl. dat elke taal opgebou moet wees volgens dieselfde grondprinsipes, ongeldig nie? Taalpolitieke oortuigingskrag het hierdie argument nog minder. Sal jy in alle erns vir mense kan se: "Ons moet aanhou om die taal te praat ...

Assessing the anticancer compounds Se-methylselenocysteine and glucosinolates in Se-biofortified broccoli (brassica oleracea L. var. italica) sprouts and florets

Science.gov (United States)

Broccoli (Brassica oleracea L. var. italica) is a rich source of chemopreventive compounds. Here, we evaluated and compared the effect of selenium (Se) treatment on the accumulation of anticancer compound Se-methylselenocysteine (SeMSCys) and glucosinolates in broccoli sprouts and florets. Total Se ...

The effects of staggered bandgap in the InP/CdSe and CdSe/InP core/shell quantum dots.

Science.gov (United States)

Kim, Sunghoon; Park, Jaehyun; Kim, Sungwoo; Jung, Won; Sung, Jaeyoung; Kim, Sang-Wook

2010-06-15

New type-II structures of CdSe/InP and InP/CdSe core-shell nanocrystals which have staggered bandgap alignment were fabricated. Using a simple model for the wave function for electrons and holes in InP/CdSe and CdSe/InP core/shell nanocrystals showed the wave function of the electron and hole spread into the shell, respectively. The probability density of the InP/CdSe and CdSe/InP core/shell QDs also showed a similar tendency. As a result, the structure exhibits increased delocalization of electrons and holes, leading to a red-shift in absorption and emission. Quantum yield increased in the InP/CdSe, however decreased in the CdSe/InP. The reason may be due to the surface trap and high activation barrier for de-trapping in the InP shell. 2010 Elsevier Inc. All rights reserved.

Glass forming tendencies of chalcogenides of the system (As2Se3)sub(1-x):(T12Se)sub(x)

International Nuclear Information System (INIS)

Majid, C.A.

1982-07-01

In this paper glass forming capabilities of chalcogenide glasses based on As 2 Se 3 with T1 2 Se concentrations are discussed. The studies were made using the differential thermal analysis (DTA) technique. These studies show that the glass forming tendency of As 2 Se 3 decreases as the concentrations of T1 2 Se molecules are increased. Also these studies show that with addition of T1 2 Se, the glass transition temperature Tsub(g) of As 2 Se 3 decreases, suggesting a tendency for weaker bonding and hence less stability of T1-rich compositions. (author)

Synthesis of dextran/Se nanocomposites for nanomedicine application

International Nuclear Information System (INIS)

Shen Yuhua; Wang Xiufang; Xie Anjian; Huang Lachun; Zhu Jinmiao; Chen Long

2008-01-01

In this study, spherical Se nanoparticles were prepared by the reduction of aqueous selenious acid with ice bath through a simple, conventional, and one-step method without the aid of any surfactant, or template. The nanoparticles were characterized by transmission electron microscopy (TEM), photon correlation spectroscopy (PCS), X-ray powder diffraction (XRD), Ultraviolet-visible spectroscopy (UV-vis), Zeta potential, respectively. The results show the Se nanoparticles have good particle dispersion with the average diameters of 36 nm and are amorphous (α-Se). Tablets A and B containing dextran and Se nanoparticles were synthesized with different preparation methods. Se nanoparticles studded equably in the interior and the surface of the tablets, and there are strong interactions between Se and dextran. The release of Se from tablets is investigated in the simulated gastric and intestinal conditions. It is found that the pH environment and different synthetical methods have significant influence on the release rate of Se. The release mechanism of Se nanoparticles is also discussed. The nanocomposites can be applied in controlled releasing of Se nanomedicine

Design and characterization of Au/In4Se3/Ga2S3/C field effect transistors

Science.gov (United States)

Khusayfan, Najla M.; Qasrawi, A. F.; Khanfar, Hazem K.

2018-03-01

In the current work, the structural and electrical properties of the In4Se3/Ga2S3 interfaces are investigated. The X-ray analysis which concern the structural evolutions that is associated with the substrate type has shown that the hexagonal κ-In2Se3 and the selenium (rhombohedral) rich orthorhombic In4Se3 phases of InSe are grown onto glass and gold substrates, respectively, at substrate of temperature of 300 °C in a vacuum media. The coating of the κ-In2Se3 and of In4Se3 with amorphous layer of Ga2S3 is accompanied with uniform strain. The In4Se3/Ga2S3 interface is found to be of attractive quantum confinement features as it exhibited a conduction and valence band offsets of 0.20 and 1.86 eV, respectively. When the Au/In4Se3/Ga2S3 interface was contacted with carbon metallic point contact, it reveals a back to back Schottky hybrid device that behaves typically as metal-oxidesemiconductor field effect transition (MOSFET). The depletion capacitance analysis of this device revealed built in voltage values of 1.91 and 1.64 V at the Au and C sides, respectively. The designed MOSFET which is characterized in the frequency domain of 0.01-1.80 GHz is observed to exhibit, resonance-anti-resonance phenomena associated with negative capacitance effect in a wide domain of frequency that nominate it for applications in electronic circuits as parasitic capacitance minimizer, bus switching speed enhancer and low pass/high pass filter at microwave frequencies.

1998 annual report

International Nuclear Information System (INIS)

1999-05-01

Operational and financial information from Nova Scotia Power Inc. for 1998 was presented. The utility is the major supplier of electricity in Nova Scotia and serves over 430,000 residential, commercial and industrial customers. Assets of the business total 2.8 billion. Nova Scotia Power provides 97 per cent of the electric power generation, 99 per cent of transmission and 95 per cent of the distribution of electric power in the province. At present, Nova Scotia Power uses mostly coal and oil for power generation, but these will be gradually displaced as natural gas from the Sable Offshore Energy Project comes on stream. The availability of natural gas for power generation is assured through the Utility's 12.5 per cent stake in the Maritimes and Northeast natural gas pipeline. In 1998 the record warm, dry weather reduced residential and commercial revenues and increased fuel costs, which contributed to lower earnings. The Utility signed a 10-year contract with Shell Canada Limited to purchase 62 million cubic feet of gas per day, or 11 per cent of the expected production of Sable Offshore Energy Inc. As part of its strategy to capitalize on Sable gas, the Utility decided to re-fit its Tufts Cove generating station to burn Sable gas or oil and it also decided not to pursue the rights to distribute natural gas in Nova Scotia. Over half of the company's thermal generating plants implemented successful advance date changes with systems already operating in Year 2000 mode. Ratings of system reliability significantly improved during the year and safety performance was the best ever. The Utility was reorganized into a holding company structure effective January 1, 1999, after receiving shareholder and legislative approvals. tabs., figs

Amélioration de la durabilité des briques de terre comprimée à base d’un sol de la région de Biskra

Directory of Open Access Journals (Sweden)

Izemmourena O.

2014-04-01

Full Text Available Sa disponibilité et son faible coût ont fait de la terre dans la plupart des régions du globe, un des matériaux de construction les plus répondus et plus anciens. La terre présente un intérêt écologique évidant, où sa construction participe bien à la protection de l’environnement à l’industrie chimique (fabrication de ciment où à l’économie energétique (fabrication des briques cuites. Le problème, que pose l’utilisation traditionnelle de la terre, est donc un problème de durabilité du matériau lui-même. L’objectif de ce travail est fixé principalement sur l’amélioration des caractéristiques des briques de terre comprimée, surtout insensibilité à l’eau. La stabilisation est obtenue par correction granulométrique réalisée par deux types de sable concassée avec cinq teneurs 0, 10, 20, 30, 40% du poids du sol, en fixant le dosage en ciment à 5% et la contrainte de compactage à 100 bars. Dans ce travail on a étudié l’influence des différents teneurs en sable concassée sur les résistances mécaniques de compression à l’état sec et à l’état humide, sur la durabilité, l’absorption capillaire, l’absorption totale, l’action gel-dégel. Les résultats obtenus montrent que l’augmentation de la concentration du sable améliore considérablement les résistances mécaniques et présente un optimum de 30% de sable pour les essais de durabilité.

Trophy Hunting and Sustainability: Temporal Dynamics in Trophy Quality and Harvesting Patterns of Wild Herbivores in a Tropical Semi-Arid Savanna Ecosystem.

Science.gov (United States)

Muposhi, Victor K; Gandiwa, Edson; Bartels, Paul; Makuza, Stanley M; Madiri, Tinaapi H

2016-01-01

The selective nature of trophy hunting may cause changes in desirable phenotypic traits in harvested species. A decline in trophy size of preferred species may reduce hunting destination competitiveness thus compromising the sustainability of trophy hunting as a conservation tool. We explored the trophy quality and trends in harvesting patterns (i.e., 2004-2015) of Cape buffalo (Syncerus caffer), African elephant (Loxodonta africana), greater kudu (Tragelaphus strepsiceros) and sable (Hippotragus niger) in Matetsi Safari Area, northwest Zimbabwe. We used long-term data on horn and tusk size, age, quota size allocation and offtake levels of selected species. To analyse the effect of year, area and age on the trophy size, quota size and offtake levels, we used linear mixed models. One sample t-test was used to compare observed trophy size with Safari Club International (SCI) minimum score. Trophy sizes for Cape buffalo and African elephant were below the SCI minimum score. Greater kudu trophy sizes were within the minimum score threshold whereas sable trophy sizes were above the SCI minimum score between 2004 and 2015. Age at harvest for Cape buffalo, kudu and sable increased whilst that of elephant remained constant between 2004 and 2015. Quota size allocated for buffalo and the corresponding offtake levels declined over time. Offtake levels of African elephant and Greater kudu declined whilst the quota size did not change between 2004 and 2015. The quota size for sable increased whilst the offtake levels fluctuated without changing for the period 2004-2015. The trophy size and harvesting patterns in these species pose a conservation and management dilemma on the sustainability of trophy hunting in this area. We recommend: (1) temporal and spatial rotational resting of hunting areas to create refuge to improve trophy quality and maintenance of genetic diversity, and (2) introduction of variable trophy fee pricing system based on trophy size.

Trophy Hunting and Sustainability: Temporal Dynamics in Trophy Quality and Harvesting Patterns of Wild Herbivores in a Tropical Semi-Arid Savanna Ecosystem.

Directory of Open Access Journals (Sweden)

Victor K Muposhi

Full Text Available The selective nature of trophy hunting may cause changes in desirable phenotypic traits in harvested species. A decline in trophy size of preferred species may reduce hunting destination competitiveness thus compromising the sustainability of trophy hunting as a conservation tool. We explored the trophy quality and trends in harvesting patterns (i.e., 2004-2015 of Cape buffalo (Syncerus caffer, African elephant (Loxodonta africana, greater kudu (Tragelaphus strepsiceros and sable (Hippotragus niger in Matetsi Safari Area, northwest Zimbabwe. We used long-term data on horn and tusk size, age, quota size allocation and offtake levels of selected species. To analyse the effect of year, area and age on the trophy size, quota size and offtake levels, we used linear mixed models. One sample t-test was used to compare observed trophy size with Safari Club International (SCI minimum score. Trophy sizes for Cape buffalo and African elephant were below the SCI minimum score. Greater kudu trophy sizes were within the minimum score threshold whereas sable trophy sizes were above the SCI minimum score between 2004 and 2015. Age at harvest for Cape buffalo, kudu and sable increased whilst that of elephant remained constant between 2004 and 2015. Quota size allocated for buffalo and the corresponding offtake levels declined over time. Offtake levels of African elephant and Greater kudu declined whilst the quota size did not change between 2004 and 2015. The quota size for sable increased whilst the offtake levels fluctuated without changing for the period 2004-2015. The trophy size and harvesting patterns in these species pose a conservation and management dilemma on the sustainability of trophy hunting in this area. We recommend: (1 temporal and spatial rotational resting of hunting areas to create refuge to improve trophy quality and maintenance of genetic diversity, and (2 introduction of variable trophy fee pricing system based on trophy size.

Molecular structure of virgin and Tg cycled (Ag2Se)x (AsSe)1-x bulk glasses

Science.gov (United States)

Wachtman, Jacob; Chen, Ping; Boochand, P.

2009-03-01

AsSe, the base glass (x = 0) in the titled ternary, is an interesting example of a chalcogenide that is partially de-mixed into As4Se4 molecules segregated from a connected AsSe network, with the latter determining glass network properties. Raman scattering reveals sharp modes of the Realgar molecules that are superimposed on broad modes coming from of the backbone. Upon Tg cycling virgin samples (as quenched melts), the concentration of de-mixed As4Se4 molecules decreases, suggesting that thermally induced polymerization occurs; molecules break up to form part of the connective tissue. Modulated DSC experiments reveal a broad exotherm near 140 ^oC in virgin samples, which becomes nearly extinct in Tg cycled samples. The exotherm may represent Realgar molecules nano-crystallizing as the temperature approaches Tg. Compositional trends in thermal parameters such as Tg(x), δCp(x), and the δHnr(x) as a function of Ag2Se content `x' of the glasses will be reported.

Autismos que se 'curan'

OpenAIRE

Artigas, Josep, 1948-; Paula Pérez, Isabel, 1970-

2016-01-01

Introducción. La investigación sobre el autismo, basada principalmente en el modelo categórico del Manual diagnóstico y estadístico de los trastornos mentales, se ha centrado de forma preferente en la epidemiología, las manifestaciones clínicas, los mecanismos cognitivos y los determinantes biológicos y ambientales; sin embargo, se ha prestado escaso interés a las trayectorias evolutivas, las cuales son decisivas de cara al pronóstico a medio y largo plazo. Objetivo. Revisar el curso evolutiv...

Cs[FeSe{sub 2}], Cs{sub 3}[FeSe{sub 2}]{sub 2}, and Cs{sub 7}[Fe{sub 4}Se{sub 8}]. Missing links of known chalcogenido ferrate series

Energy Technology Data Exchange (ETDEWEB)

Stueble, Pirmin; Roehr, Caroline [Institut fuer Anorganische und Analytische Chemie, Universitaet Freiburg (Germany)

2017-11-17

The three cesium selenido ferrate title compounds with an Se:Fe ratio of 2:1 were synthesized from stoichiometric samples reacting elemental Cs either (A) with Fe and Se in a double-crucible setup (Cs[FeSe{sub 2}], Cs{sub 3}[FeSe{sub 2}]{sub 2}) or (B) with previously prepared FeSe{sub 2} (Cs{sub 3}[FeSe{sub 2}]{sub 2}, Cs{sub 7}[Fe{sub 4}S{sub 8}]) (T{sub max} = 800-1000 C). The pure Fe{sup III} ferrate Cs[FeSe{sub 2}] crystallizes in the Tl[FeSe{sub 2}] type [monoclinic, space group C2/m, a = 1392.95(10), b = 564.43(3), c = 737.44(6) pm, β = 119.163(5) , Z = 4, R{sub 1} = 0.0550]. It is thus not isotypic to all other alkali ferrates(III) A[FeS{sub 2}] and A[FeSe{sub 2}] containing chains of edge-sharing tetrahedra, but crystallizes in a t2 subgroup of the Immm structure of Cs[FeS{sub 2}]. The mixed-valent chain compound Cs{sub 3}[FeSe{sub 2}]{sub 2} is isotypic to its sulfido analogue [orthorhombic, space group Pnma, a = 777.88(6), b = 1151.02(6), c = 1341.61(7) pm, Z = 4, R{sub 1} = 0.0470]. In contrast to the isopunctal Na{sub 3}[FeSe{sub 2}]{sub 2} type K/Rb compounds the chains are only slightly corrugated. The monoclinic, likewise mixed-valent Fe{sup II/III} selenido ferrate Cs{sub 7}[Fe{sub 4}Se{sub 8}] [monoclinic, space group C2/c, a = 1953.79(10), b = 879.71(5), c = 1717.03(10) pm, β = 117.890(2) , Z = 4, R{sub 1} = 0.0816] is isostructural both to the cesium sulfido and tellurido compound. The structure contains oligomeric moieties of four edge sharing [FeSe{sub 4}] tetrahedra forming slightly distorted tetrahedral clusters [Fe{sub 4}Se{sub 8}]{sup 7-}, which are surrounded by a cube of 26 Cs cations. Based on a structure map, the crystal chemistry of the three title compounds is discussed together with all chain/cluster ferrates of the general series A{sub 1+x}[Fe{sup III}{sub 1-x}Fe{sup II}{sub x}Q{sub 2}] (x = 0-1; A = Na, K, Rb, Cs; Q = S, Se, Te). (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

A simple and facile synthesis of MPA capped CdSe and CdSe/CdS core/shell nanoparticles

Science.gov (United States)

Sukanya, D.; Sagayaraj, P.

2015-06-01

II-VI semiconductor nanostructures, in particular, CdSe quantum dots have drawn a lot of attention because of their promising potential applications in biological tagging, photovoltaic, display devices etc. due to their excellent optical properties, high emission quantum yield, size dependent emission wavelength and high photostability. In this paper, we describe the synthesis and properties of mercaptopropionic acid capped CdSe and CdSe/CdS nanoparticles through a simple and efficient co-precipitation method followed by hydrothermal treatment. The growth process, characterization and the optical absorption as a function of wavelength for the synthesized MPA capped CdSe and CdSe/CdS nanoparticles have been determined using X-ray diffraction study (XRD), Ultraviolet-Visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FT-IR) and High Resolution Transmission Electron Microscopy (HRTEM).

A simple and facile synthesis of MPA capped CdSe and CdSe/CdS core/shell nanoparticles

International Nuclear Information System (INIS)

Sukanya, D.; Sagayaraj, P.

2015-01-01

II-VI semiconductor nanostructures, in particular, CdSe quantum dots have drawn a lot of attention because of their promising potential applications in biological tagging, photovoltaic, display devices etc. due to their excellent optical properties, high emission quantum yield, size dependent emission wavelength and high photostability. In this paper, we describe the synthesis and properties of mercaptopropionic acid capped CdSe and CdSe/CdS nanoparticles through a simple and efficient co-precipitation method followed by hydrothermal treatment. The growth process, characterization and the optical absorption as a function of wavelength for the synthesized MPA capped CdSe and CdSe/CdS nanoparticles have been determined using X-ray diffraction study (XRD), Ultraviolet-Visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FT-IR) and High Resolution Transmission Electron Microscopy (HRTEM)

Como Perseu se defendeu de Medusa?

Directory of Open Access Journals (Sweden)

Rose Lumertz de Freitas

2012-04-01

Full Text Available Na psicanálise francesa, principalmente com Lacan, o conceito de falta passou a ser de grande importância. Ao que, então, perguntamos: o que é a falta? E quando esta falta? O que acontece? O que acontece quando o não especularizável não está excluído, se fazendo, assim, especular? Quando Perseu vai ao encontro de Medusa, guiando-se por sua imagem refletida em um espelho de bronze polido, segurado por Atena, como pôde este herói defender-se de Medusa? Qual foi a forma encontrada por ele para se defender da presença do objeto que introduz a dimensão do real nu?

Comparing the influence of selenite (Se4+) and selenate (Se6+) on the inhibition of the mercury (Hg) phytotoxicity to pak choi.

Science.gov (United States)

Tran, Thi Anh Thu; Dinh, Quang Toan; Cui, Zeiwei; Huang, Jie; Wang, Dan; Wei, Tianjiao; Liang, Dongli; Sun, Xin; Ning, Ping

2018-01-01

Selenite (Se (IV)) and selenate (Se (IV)) have recently been demonstrated to be equally effective in inhibiting mercury (Hg) phytotoxicity to plants. This assertion is still unclear. In this study, we aimed to explore the potential effects of Se species (Se 4+ and Se 6+ ) on the inhibition of the mercury (Hg) bioavailability to pak choi in dry land. Pot experiments with exposure to different dosages of mercuric chloride (HgCl 2 ) and selenite (Na 2 SeO 3 ) or selenate (Na 2 SeO 4 ) were treated. To compare the influence of Se (IV) and Se (VI) on the bioaccumulation and bioavailability of Hg, the levels of total Hg in different pak choi (Brassica chinensis L.) tissues (roots and shoots) and the distribution changes of Hg fractions in soil before planting and after harvest were determined as well as the Hg I R values in soils (relative binding intensity) were analyzed. Results showed that application Se (IV) reduced the concentrations of Hg in pak choi roots more than Se (VI). Hg concentrations were also decreased in pak choi shoots in Se (IV) treatments, while which notably increased in Se (VI) treatments. Thus, Se (IV) plays a more important role than Se (VI) in limiting the absorption and bioaccumulation of Hg in pak choi. Moreover, this inhibition may only significantly occur when Se (IV) is at an appropriate level (2.5mg/kg). In addition, the good correlations between the proportions of mobile Hg fractions (soluble and exchangeable fractions), I R values with the Hg concentrations in plants were observed. This affirmed the importance of the Hg fractions transformation and the I R indicator of Hg in the assessment of their bioavailability. Our findings regarding the importance of Se (IV) influence in reducing Hg bioaccumulation not only provided the correct appraisal about the effect of Se species on the inhibition of the Hg phytotoxicity to pak choi in dry land, but also be a good reference for selecting Se fertilizer forms (Se 4+ or Se 6+ ). Copyright © 2017

Structural changes in quantum dots core-shell CdSe/ZnS by thermal treatment and proton irradiation

International Nuclear Information System (INIS)

Almeida, L.G.; Sortica, M.A.; Grande, P.L.; Debastiani, R.; Dias, J.F.; Hentz, A.; Radtke, C.

2013-01-01

Full text: Compound quantum-dots (QDs) are promising materials used in many fields of technological development. In spite of that, the accurate knowledge of their compositional depth-profiling is still a technological challenge. Recently, we used the MEIS (medium energy ion-scattering) technique, combined with PIXE and RBS (Rutherford backscattering spectrometry) to characterize core-shell nanostructures of CdSe/ZnS [1]. In this work, we use the same characterization methods to survey the changes of elemental distribution in the the core and shell regions of these QDs, when submitted to a range of thermal treatments and proton irradiation conditions. Our preliminary results show that for temperatures below the melting point of the bulk CdSe compound, there is already a decrease in the amount of cadmium, accompanied by an overall decrease in the diameter of the CdSe QD nuclei. [1] M. A. Sortica, P. L. Grande, C. Radtke, L. Almeida, R. Debastiani, J. F. Dias, A. Hentz, Applied Physics Letters, 101 (2012)023110. (author)

Surface half-metallicity of half-Heusler compound FeCrSe and interface half-metallicity of FeCrSe/GaP

Energy Technology Data Exchange (ETDEWEB)

Khalaf Al-zyadi, Jabbar M., E-mail: jabbar_alzyadi@yahoo.com [Department of Physics, College of Education for Pure Sciences, University of Basrah (Iraq); Jolan, Mudhahir H. [Department of Physics, College of Education for Pure Sciences, University of Basrah (Iraq); Yao, Kai-Lun, E-mail: klyao@mail.hust.edu.cn [School of Physics and Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan 430074 (China); International Center of Materials Physics, Chinese Academy of Sciences, Shenyang 110015 (China)

2016-04-01

Recent studies showed that half-Heusler FeCrSe exhibits half-metallic ferromagnetism (Huang et al. [20]). In this paper, we investigate extensively the electronic, magnetic, and half-metallic properties of the half-Heusler alloy FeCrSe (111) and (001) surfaces and the interface with GaP (111) substrate by using the first-principles calculations within the density functional theory. The atomic density of states demonstrates that the half-me tallicity verified in the bulk FeCrSe is maintained at the CrSe-terminated (001) and Se-terminated (111) surfaces, but lost at both Cr- and Fe-terminated (111) surfaces and the Fe-terminated (001) surface. Alternatively, for the interface of FeCrSe/GaP (111), the bulk half-metallicity is destroyed at Se–P configuration while Se–Ga interface and subinterface show nearly 100% spin polarization. Moreover, the calculated interfacial adhesion energies exhibit that Se–Ga shape is more stable than the Se–P one. The calculated magnetic moments of Se, Ga at the Se–Ga (111) interface and P at the Se–P (111) interface increase with respect to the corresponding bulk values while the atomic magnetic moment of Se atom at the Se–P (111) interface decreases. We also notice that the magnetic moments of subinterface Fe at both Se–Ga and Se–P (111) interfaces decrease compared to the bulk values. - Highlights: • The half-metallicity verified in the bulk FeCrSe is kept at the CrSe-terminated (001) and Se-terminated (111) surfaces. • The calculated interfacial adhesion energies exhibit that Se–Ga shape is more stable than Se–P. • The magnetic moments of Se, Ga and P atoms at the interface increase. • The Se–Ga interface shows nearly 100% spin polarization.

Transport Properties of ZnSe- ITO Hetero Junction

Science.gov (United States)

Ichibakase, Tsuyoshi

In this report, ITO(Indium Tin Oxide) was used on the glass substrates as the transparent electrode, and ZnSe layer was prepared by the vacuum deposition on this ITO. Then, the electrical characteristics of this sample were investigated by mans of the electric current transport analysis. The sample that ZnSe was prepared as 3.4 μm in case of ITO-ZnSe sample, has high density level at the junction surface. The ITO-ZnSe junction has two type of diffusion current. However, the ITO-ZnSe sample that ZnSe layer was prepared as 0.1 μm can be assumed as the ohmic contact, and ITO-ZnSe(0.1μm) -CdTe sample shows the avalanche breakdown, and it is considered that the avalanche breakdown occurs in CdTe layer. It is difficult to occur the avalanche breakdown, if ZnSe-CdTe junction has high-density level and CdTe layer has high-density defect. Hence, the ZnSe-CdTe sample that CdTe layer was prepared on ITO-ZnSe(0.1μm) substrate has not high-density level at the junction surface, and the CdTe layer with little lattice imperfection can be prepared. It found that ITO-ZnSe(0.1μm) substrate is available for the II-VI compounds semiconductor device through above analysis result.

Li diffusion in NbSe/sub 2/ and Ag/sub 0.25/NbSe/sub 2/ single crystals

International Nuclear Information System (INIS)

Folinsbee, J.T.; Simpson, A.M.; Jericho, M.H.

1986-01-01

Measurements are reported of the diffusion of Lithium into NbSe/sub 2/ and into NbSe/sub 2/ preintercalated with silver. Diffusion parallel to the layers is found to be at least 2 orders of magnitude greater than perpendicular to the layers, but not to be greatly affected by the presence of intercalated silver. The activation energy for Li hopping in NbSe/sub 2/ is estimated to be 520 meV. The staging structure of Ag/sub x/NbSe/sub 2/ is also reported. These results have implications for the characterization of cathode materials in intercalation batteries

Luminescence of nanocrystalline ZnSe:Mn2+

NARCIS (Netherlands)

Suyver, J.F.; Wuister, S.F.; Kelly, J.J.; Meijerink, A.

2000-01-01

The luminescence properties of nanocrystalline ZnSe:Mn^(2+) prepared via an inorganic chemical synthesis are described. Photoluminescence spectra show distinct ZnSe and Mn^(2+) related emissions, both of which are excited via the ZnSe host lattice. The Mn^(2+) emission wavelength and the

The Influence of Interfaces on Properties of Thin-Film Inorganic Structural Isomers Containing SnSe-NbSe2 Subunits.

Science.gov (United States)

Alemayehu, Matti B; Falmbigl, Matthias; Ta, Kim; Johnson, David C

2015-04-28

Inorganic isomers ([SnSe]1+δ)m(NbSe2)n([SnSe]1+δ)p(NbSe2)q([SnSe]1+δ)r(NbSe2)s where m, n, p, q, r, and s are integers and m + p + r = n + q + s = 4 were prepared using the modulated elemental reactant technique. This series of all six possible isomers provides an opportunity to study the influence of interface density on properties while maintaining the same unit cell size and composition. As expected, all six compounds were observed to have the same atomic compositions and an almost constant c-axis lattice parameter of ≈4.90(5) nm, with a slight trend in the c-axis lattice parameter correlated with the different number of interfaces in the isomers: two, four and six. The structures of the constituents in the ab-plane were independent of one another, confirming the nonepitaxial relationship between them. The temperature dependent electrical resistivities revealed metallic behavior for all the six compounds. Surprisingly, the electrical resistivity at room temperature decreases with increasing number of interfaces. Hall measurements suggest this results from changes in carrier concentration, which increases with increasing thickness of the thickest SnSe block in the isomer. Carrier mobility scales with the thickness of the thickest NbSe2 block due to increased interfacial scattering as the NbSe2 blocks become thinner. The observed behavior suggests that the two constituents serve different purposes with respect to electrical transport. SnSe acts as a charge donor and NbSe2 acts as the charge transport layer. This separation of function suggests that such heterostructures can be designed to optimize performance through choice of constituent, layer thickness, and layer sequence. A simplistic model, which predicts the properties of the complex isomers from a weighted sum of the properties of building blocks, was developed. A theoretical model is needed to predict the optimal compound for specific properties among the many potential compounds that can be prepared.

Study of various processes for marking sediments with gold-198; Etude de divers procedes de marquages de sediments par l'or 198

Energy Technology Data Exchange (ETDEWEB)

Jeanneau, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-12-15

The use of radioactive isotopes for the study of sediment deposits is based mainly on two methods: marking in the mass - a glass of an element which can be activated replaces the sediment; surface marking - a physico-chemical process is used to deposit a radio-element at the surface of the sediment. The second process is used in particular for sands when it is advantageous to have a large number of particles for statistical analysis. The aim of this work was to develop a rapid and simple method of marking which could be applied on the actual site of the experiment where equipment, may be limited. The method recommended for marking sand with gold-198 is a combination of the Petersen (treatment with tin chloride) and Campbell (treatment with silver) methods combined with prior treatments with nitric acid and caustic soda. Using this method it is possible to deposit 125 mg of gold per kilo of sediment with a yield of 95 per cent (i.e. 10 Ci/kg) using a hydrochloric acid solution containing gold. The problem of the solidity of the deposits, of their value and of their reproducibility is discussed from the point of view of the mineral constitution of the sand. (author) [French] L'utilisation d'isotopes radioactifs pour l'etude des deplacements sedimentaires fait, principalement appel a deux methodes: le marquage massique - un verre contenant un element activable remplace le sediment; le marquage superficiel - un traitement physico-chimique permet de deposer un radioelement a la surface du sediment. Le second procede est surtout employe pour les sables lorsqu'il est utile de disposer d'un grand nombre de grains pour des raisons statistiques. Le but de ce travail etait de mettre au point une methode simple et rapide de marquage pouvant etre appliquee sur le site meme de l'experience pour les utilisateurs disposant d'un equipement limite. Le procede preconise pour le marquage des sables par l'or 198 est une combinaison des methodes Petersen (traitement au chlorure d

Removal of selenite by zero-valent iron combined with ultrasound: Se(IV) concentration changes, Se(VI) generation, and reaction mechanism.

Science.gov (United States)

Fu, Fenglian; Lu, Jianwei; Cheng, Zihang; Tang, Bing

2016-03-01

In this paper, the performance and application of zero-valent iron (ZVI) assisted by ultrasonic irradiation for the removal of selenite (Se(IV)) in wastewater was evaluated and reaction mechanism of Se(IV) with ZVI in such systems was investigated. A series of batch experiments were conducted to determine the effects of ultrasound power, pH, ZVI concentration, N2 and air on Se(IV) removal. ZVI before and after reaction with Se(IV) was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Results indicated that ultrasound can lead to a significant synergy in the removal of Se(IV) by ZVI because ultrasound can promote the generation of OH and accelerate the advanced Fenton process. The primary reaction products of ZVI and Se(IV) were Se(0), ferrihydrite, and Fe2O3. Copyright © 2015 Elsevier B.V. All rights reserved.

Semiconductor laser with longitudinal electron-beam pumping and based on a quantum-well ZnCdSe/ZnSe structure grown on a ZnSe substrate by molecular beam epitaxy

International Nuclear Information System (INIS)

Kozlovskii, Vladimir I; Korostelin, Yurii V; Skasyrsky, Yan K; Shapkin, P V; Trubenko, P A; Dianov, Evgenii M

1998-01-01

The method of molecular beam epitaxy on a ZnSe substrate was used to grow a ZnCdSe/ZnSe structure with 115 quantum wells. This structure was made up into a cavity which included part of the substrate. Lasing was excited by longitudinal pumping with a scanning electron beam of E e = 40 - 70 keV energy. At T = 80 K for E e = 65 keV the threshold current density was 60 A cm -2 and the output power was 0.15 W at the 465 nm wavelength. At T= 300 K the lasing (λ= 474 nm) occurred in the ZnSe substrate. (lasers)

The outlook for natural gas liquids

International Nuclear Information System (INIS)

Hawkins, D.J.

1999-01-01

The future development of the NGL industry in Canada was outlined. NGLs are a by-product or co-product of gas production. NGL recovery from Canadian gas production is expected to increase due to upcoming expansion in gas production and gas pipeline capacity. The NGL market development depends on efficient and cost effective transportation systems as well as on the expansion of export market for Canadian NGL. To show the trends in the expansion of existing and new pipeline systems (crucial to the good health of the NGL industry) various ongoing and planned projects are reviewed, among them (1) the pipeline extension to the Taylor area of northeastern BC, (2) the development of a new ethane plus fractionator at Redwater, (3) the expansion of Alberta ethane gathering system and ethylene capacity in Alberta, (4) the prospects for the Sarnia system, (5) the adequacy of the Cochin capacity, and (6) Sable Island NGL supply. An extensive review is provided of the disposition of Sable Island propane and butane, the Alliance/Aux Sable Project for a straddle plant with NGL recovery and fractionation facilities near Morris, Illinois. NGL market developments in the US Midwest, and the impact of expanded NGL supply in the US on Canadian NGL suppliers are also evaluated. 15 figs

Effect of tissue inhomogeneity on dose distribution of point sources of low-energy electrons

International Nuclear Information System (INIS)

Kwok, C.S.; Bialobzyski, P.J.; Yu, S.K.; Prestwich, W.V.

1990-01-01

Perturbation in dose distributions of point sources of low-energy electrons at planar interfaces of cortical bone (CB) and red marrow (RM) was investigated experimentally and by Monte Carlo codes EGS and the TIGER series. Ultrathin LiF thermoluminescent dosimeters were used to measure the dose distributions of point sources of 204 Tl and 147 Pm in RM. When the point sources were at 12 mg/cm 2 from a planar interface of CB and RM equivalent plastics, dose enhancement ratios in RM averaged over the region 0--12 mg/cm 2 from the interface were measured to be 1.08±0.03 (SE) and 1.03±0.03 (SE) for 204 Tl and 147 Pm, respectively. The Monte Carlo codes predicted 1.05±0.02 and 1.01±0.02 for the two nuclides, respectively. However, EGS gave consistently 3% higher dose in the dose scoring region than the TIGER series when point sources of monoenergetic electrons up to 0.75 MeV energy were considered in the homogeneous RM situation or in the CB and RM heterogeneous situation. By means of the TIGER series, it was demonstrated that aluminum, which is normally assumed to be equivalent to CB in radiation dosimetry, leads to an overestimation of backscattering of low-energy electrons in soft tissue at a CB--soft-tissue interface by as much as a factor of 2

Development of Pathways to Achieve the SE4ALL Energy Efficiency Objective: Global and Regional Potential for Energy Efficiency Improvements

DEFF Research Database (Denmark)

Gregg, Jay Sterling; Balyk, Olexandr; Pérez, Cristian Hernán Cabrera

This study examines the three objectives of the UN Sustainable Energy for All (SE4ALL) initiative: 1. Ensure universal access to modern energy services by 2030. 2. Double the global rate of improvement in energy efficiency (from 1.3% to 2.6% annual reduction in energy intensity of GDP) by 2030. 3....... Double the share of renewable energy in global final energy from 18% to 36% by 2030. The integrated assessment model, ETSAP-TIAM, was used in this study to compare, from an economic optimization point of view, different scenarios for the development of the energy system between 2010 and 2030....... This analysis is conducted on a global and regional scale. The scenarios were constructed to analyze the effect of achieving the SE4ALL energy efficiency objective, the SE4ALL renewable energy objective, both together, and all three SE4ALL objectives. Synergies exist between renewable energy and energy...

SE-72/AS-72 generator system based on Se extraction/ As reextraction

Science.gov (United States)

Fassbender, Michael Ernst; Ballard, Beau D

2013-09-10

The preparation of a .sup.72Se/.sup.72As radioisotope generator involves forming an acidic aqueous solution of an irradiated alkali bromide target such as a NaBr target, oxidizing soluble bromide in the solution to elemental bromine, removing the elemental bromine, evaporating the resulting solution to a residue, removing hydrogen chloride from the residue, forming an acidic aqueous solution of the residue, adding a chelator that selectively forms a chelation complex with selenium, and extracting the chelation complex from the acidic aqueous solution into an organic phase. As the .sup.72Se generates .sup.72As in the organic phase, the .sup.72As may be extracted repeatedly from the organic phase with an aqueous acid solution.

Implications of orbital hybridization on the electronic properties of doped quantum dots: the case of Cu:CdSe

Science.gov (United States)

Wright, Joshua T.; Forsythe, Kyle; Hutchins, Jamie; Meulenberg, Robert W.

2016-04-01

This paper investigates how chemical dopants affect the electronic properties of CdSe quantum dots (QDs) and why a model that incorporates the concepts of orbital hybridization must be used to understand these properties. Extended X-ray absorption fine structure spectroscopy measurements show that copper dopants in CdSe QDs occur primarily through a statistical doping mechanism. Ultraviolet photoemission spectroscopy (UPS) experiments provide a detailed insight on the valence band (VB) structure of doped and undoped QDs. Using UPS measurements, we are able to observe photoemission from the Cu d-levels above VB maximum of the QDs which allows a complete picture of the energy band landscape of these materials. This information provides insights into many of the physical properties of doped QDs, including the highly debated near-infrared photoluminescence in Cu doped CdSe QDs. We show that all our results point to a common theme of orbital hybridization in Cu doped CdSe QDs which leads to optically and electronically active states below the conduction band minimum. Our model is supported from current-voltage measurements of doped and undoped materials, which exhibit Schottky to Ohmic behavior with Cu doping, suggestive of a tuning of the lowest energy states near the Fermi level.This paper investigates how chemical dopants affect the electronic properties of CdSe quantum dots (QDs) and why a model that incorporates the concepts of orbital hybridization must be used to understand these properties. Extended X-ray absorption fine structure spectroscopy measurements show that copper dopants in CdSe QDs occur primarily through a statistical doping mechanism. Ultraviolet photoemission spectroscopy (UPS) experiments provide a detailed insight on the valence band (VB) structure of doped and undoped QDs. Using UPS measurements, we are able to observe photoemission from the Cu d-levels above VB maximum of the QDs which allows a complete picture of the energy band landscape of

¿Como se hace publicidad por internet?

Directory of Open Access Journals (Sweden)

Franz Del Pozo

2015-01-01

Full Text Available Internet es el medio de comunicación y venta con el mayor potencial de crecimiento y efectividad al más bajo precio. Para vender se usan tarjetas de crédito, depósitos bancarios, franqueo, comercio electrónico. Explica qué y cómo se hace publicidad por Internet. La Red se usa para difundir y para vender y hay la posibilidad de hacer algo diferente a más de llegar directamente al público objetivo se interactúa con él.

M = Mo, W; X = S, Se, Te) heterostructures

KAUST Repository

Zhang, Qingyun

2018-04-16

Using first-principles calculations, we investigate the electronic properties of the two-dimensional GaX/MX2 (M = Mo, W; X = S, Se, Te) heterostructures. Orbital hybridization between GaX and MX2 is found to result in Rashba splitting at the valence-band edge around the Γ point, which grows for increasing strength of the spin-orbit coupling in the p orbitals of the chalcogenide atoms. The location of the valence-band maximum in the Brillouin zone can be tuned by strain and application of an out-of-plane electric field. The coexistence of Rashba splitting (in-plane spin direction) and band splitting at the K and K′ valleys (out-of-plane spin direction) makes GaX/MX2 heterostructures interesting for spintronics and valleytronics. They are promising candidates for two-dimensional spin-field-effect transistors and spin-valley Hall effect devices. Our findings shed light on the spin-valley coupling in van der Waals heterostructures.

Different effect of quenching temperature on Fe1+σTe0.5Se0.5 and β-FeSe

Directory of Open Access Journals (Sweden)

Zhongnan Guo

2015-02-01

Full Text Available In this work, we have demonstrated a different effect on Fe1+σTe0.5Se0.5 and β-FeSe by changing the quenching temperature. Tc is clearly reduced in Fe1+σTe0.5Se0.5 after increasing the quenching temperature from 300 °C to 500 °C, while that of β-FeSe is almost unchanged. Structure refinement indicates that after quenched at 500 °C, FeTe4 tetrahedron exhibits an expansion with the stretched Fe-Te bond, together with the increased amount of interstitial iron. These particular changes on structure are believed to be responsible for the suppression of superconductivity in Fe1+σTe0.5Se0.5.

First and second harmonic generation of the XAl{sub 2}Se{sub 4} (X=Zn,Cd,Hg) defect chalcopyrite compounds

Energy Technology Data Exchange (ETDEWEB)

Ouahrani, Tarik, E-mail: tarik_ouahrani@yahoo.fr [Laboratoire de Physique Theorique, Universite de Tlemcen, B.P.230,13000 Tlemcen (Algeria); Ecole Preparatoire en Sciences et Techniques, Depertement de Physique EPST-T, Tlemcen 13000 (Algeria); Khenata, R. [Laboratoire de Physique Quantique et de Modelisation Mathematique (LPQ3M), Universite de Mascara, 29000 Mascara (Algeria); Lasri, B. [Laboratoire de Physique Theorique, Universite de Tlemcen, B.P.230,13000 Tlemcen (Algeria); Universite Dr Tahar Moulay de Saida, B.P. 138, Cite el Nasr, Saida 20000 (Algeria); Reshak, Ali H. [School of Complex systems, FFPW- South Bohemia University, Nove Hrady 37333 (Czech Republic); School of Material Engineering, Malaysia University of Perlis, P.O Box 77, d/a Pejabat Pos Besar, 01007 Kangar, Perlis (Malaysia); Bouhemadou, A. [Department of Physics, Faculty of Sciences, University of Setif, 19000 Setif (Algeria); Bin-Omran, S. [Department of Physics and Astronomy, Faculty of Science, King Saud University, P.O. Box 2455, Riyadh 11451 (Saudi Arabia)

2012-09-15

The chemical bonding of the ZnAl{sub 2}Se{sub 4}, CdAl{sub 2}Se{sub 4} and HgAl{sub 2}Se{sub 4} defect chalcopyrites has been studied in the framework of the quantum theory of atoms in molecules (AIM). The GW quasi-particle approximation is used to correct the DFT-underestimation of energy gap, and as a consequence the linear and nonlinear optical properties are significantly enhanced. The second harmonic generation (SHG) displays certain dependence with the ionicity degree decrease through the dependency of the SHG on the band gap. The occurrence of the AIM saddle point is characterized and some clarifying features in relationship with the density topology are exposed, which enable to understand the relation with the second harmonic generation effect.

Structure and properties of ZnSxSe1-x thin films deposited by thermal evaporation of ZnS and ZnSe powder mixtures

Science.gov (United States)

Valeev, R. G.; Romanov, E. A.; Vorobiev, V. L.; Mukhgalin, V. V.; Kriventsov, V. V.; Chukavin, A. I.; Robouch, B. V.

2015-02-01

Interest to ZnSxSe1-x alloys is due to their band-gap tunability varying S and Se content. Films of ZnSxSe1-x were grown evaporating ZnS and ZnSe powder mixtures onto SiO2, NaCl, Si and ITO substrates using an original low-cost method. X-ray diffraction patterns and Raman spectroscopy, show that the lattice structure of these films is cubic ZnSe-like, as S atoms replace Se and film compositions have their initial S/Se ratio. Optical absorption spectra show that band gap values increase from 2.25 to 3 eV as x increases, in agreement with the literature. Because S atomic radii are smaller than Se, EXAFS spectra confirm that bond distances and Se coordination numbers decrease as the Se content decreases. The strong deviation from linearity of ZnSe coordination numbers in the ZnSxSe1-x indicate that within this ordered crystal structure strong site occupation preferences occur in the distribution of Se and S ions. The behavior is quantitatively confirmed by the strong deviation from the random Bernoulli distribution of the three sight occupation preference coefficients of the strained tetrahedron model. Actually, the ternary ZnSxSe1-x system is a bi-binary (ZnS+ZnSe) alloy with evanescent formation of ternary configurations throughout the x-range.

Laser-induced luminescence of multilayer structures based on polyimides and CdSe and CdSe/ZnS nanocrystals

International Nuclear Information System (INIS)

Chistyakov, A A; Dayneko, S V; Zakharchenko, K V; Kolesnikov, V A; Tedoradze, M G; Mochalov, K E; Oleinikov, V A

2009-01-01

Laser-induced luminescence of multilayer structures based on the solids of CdSe and CdSe/ZnS nanocrystals, different organic semiconductors and on the layers of organic semiconductors with embedded nanocrystals has been investigated. Drastic decrease of luminescence quantum yield is observed in the films of CdSe nanocrystals on organic semiconductors compared to those on optical glasses. The luminescence of the nanocrystals in the matrices of organic semiconductors and in multilayer structures is shown to be suppressed. The effects observed are explained by the transfer of photogenerated carriers from the nanocrystals to the molecules of organic semiconductors. The presence of the charge transfer is confirmed by a drastic increase in the conductivity (by 2 – 4 orders of magnitude) and in photovoltaic effect at the presence of CdSe and CdSe/ZnS nanocrystals in the structures under investigation. The prospects of using the multilayer structures for development new materials for solar cells are discussed

The MgSeO4-UO2SeO4-H2O system at 25 deg C

International Nuclear Information System (INIS)

Serezhkina, L.B.; Serezhkin, V.N.

1984-01-01

The method of isothermal solubility at 25 deg C has been used to study MgSeO 4 -UO 2 SeO 4 -H 2 O system. Formation of the new compound Mg 2 (UO 2 ) 3 (SeO 4 ) 5 X32H 2 O, congruently soluble in water is stated. Thermographic and X-ray diffraction investigations of the prepared magnesium selenato-uranylate and products of its dehydration are conducted

Fermi-level tuning of the Dirac surface state in (Bi1-x Sb x )2Se3 thin films

Science.gov (United States)

Satake, Yosuke; Shiogai, Junichi; Takane, Daichi; Yamada, Keiko; Fujiwara, Kohei; Souma, Seigo; Sato, Takafumi; Takahashi, Takashi; Tsukazaki, Atsushi

2018-02-01

We report on the electronic states and the transport properties of three-dimensional topological insulator (Bi1-x Sb x )2Se3 ternary alloy thin films grown on an isostructural Bi2Se3 buffer layer on InP substrates. By angle-resolved photoemission spectroscopy, we clearly detected Dirac surface states with a large bulk band gap of 0.2-0.3 eV in the (Bi1-x Sb x )2Se3 film with x  =  0.70. In addition, we observed by Hall effect measurements that the dominant charge carrier converts from electron (n-type) to hole (p-type) at around x  =  0.7, indicating that the Fermi level can be controlled across the Dirac point. Indeed, the carrier transport was shown to be governed by Dirac surface state in 0.63  ⩽  x  ⩽  0.75. These features suggest that Fermi-level tunable (Bi1-x Sb x )2Se3-based heterostructures provide a platform for extracting exotic topological phenomena.

Local structure and defect chemistry of [(SnSe)1.15]m(TaSe2) ferecrystals – A new type of layered intergrowth compound

International Nuclear Information System (INIS)

Grosse, Corinna; Atkins, Ryan; Kirmse, Holm; Mogilatenko, Anna; Neumann, Wolfgang; Johnson, David C.

2013-01-01

Highlights: •The crystal structure of [(SnSe) 1.15 ] m (TaSe 2 ) ferecrystals was analyzed by TEM. •The layers exhibit turbostratic disorder, but we also observed a local ordering. •The structures of the SnSe and TaSe 2 layers are similar to binary SnSe and 2H-TaSe 2 . •An increasing in-plane SnSe grain size with increasing m was observed. •Defect areas with missing, substituted or additional layers were found. -- Abstract: The atomic structure of the family of ferecrystals [(SnSe) 1.15 ] m (TaSe 2 ) (m = 1, 3, and 6) was investigated by means of transmission electron microscopy. The tantalum in the TaSe 2 layers was observed to have trigonal prismatic coordination similar to that found in the 2H polytype of bulk TaSe 2 . The structure of the SnSe constituent was found to be similar to that of orthorhombic α-SnSe. In the compounds with m = 1 and m = 3, regions with a local ordering of the layers along a commensurate axis, similar to the ordering in conventional misfit layer compounds, were observed. However, on a longer range the ferecrystals were found to exhibit a turbostratically disordered structure. Stacking defects were occasionally found in the samples in which a layer is interrupted and the surrounding layers are bent around these defects, while maintaining abrupt interfaces instead of interdiffusing. Volume defects were found in one sample of [(SnSe) 1.15 ] 1 (TaSe 2 ) 1 in which a SnSe layer locally substitutes a part of a TaSe 2 layer without interrupting the surrounding layers

Effect of temperature and pressure on non-linear conduction in GeTeSe chalcogenide glass

International Nuclear Information System (INIS)

El-Mansy, M.K.

1998-01-01

The I-V characteristic curves were studied in the temperature range 301-359 K and pressure range up to 7.15 x 10 9 Pa which illustrate a non-linear behaviour below (high-resistance region) and beyond (negative-resistance region) a breakdown point characterising Ge 27 Te 62 Se 11 chalcogenide glasses. The general behaviour is shifted towards lower voltage and higher current when the ambient temperature and/or the applied pressure were increased. The non-linear behaviour in the pre breakdown region is discussed according to the Poole-Frenkel field emission of electrons from deep traps located at a depth equal to 0.372eV. The analysis of the effect of field on the non-linear conduction in Ge 27 Te 62 Se 11 chalcogenide glass suggests a modification of the energy difference between filled and empty sites, where the effect of pressure suggests a reduction of the energy gap width. The analysis based on simple thermal effects in the region closer to the breakdown point implies the electrothermal process initiating the negative resistance region. The results of post breakdown region (negative-resistance region) imply the electron hopping between filled and empty localised states at Fermi level. The density of localised states is estimated which lies in the range 5.7 x 10 16 -1.84 x 10 18 cm -3 /eV

Käyttäjäystävällisen SharePoint 2013 -ohjeen laatiminen : Case VisualWeb Group Oy

OpenAIRE

Pynttäri, Henna

2014-01-01

Tässä toimintakeskeisessä opinnäytetyössä suunniteltiin ja toteutettiin VisualWeb Group Oy :n asiakkaille käyttäjäystävällinen ohje SharePoint 2013 -alustan käyttöön. Manuaali on suunnattu peruskäyttäjille, ja se sisältää ohjeet sellaisista toiminnoista, joita käyttäjä tarvitsee aloittaessaan SharePoint-alustan päälle rakennetun sivustonsa päivittämisen. Päätavoitteena oli laatia käyttöohjeesta mahdollisimman selkeä ja yksinkertainen, koska se on suunnattu käyttäjäryhmälle, jolla on vähän tai...

Diffusion length variation in photovoltaic cells with Bridgman-grown CuInSe2 substrates

International Nuclear Information System (INIS)

Champness, C.H.

2007-01-01

In a group of CuInSe 2 -CdS-ZnO photovoltaic cells, where the absorber was a layer cut from Bridgman-grown p-type CuInSe 2 ingots, electron diffusion lengths at room temperature (L n ) were estimated by the photocurrent-capacitance method. Dark capacitance measurements were also made on the same cells against reverse bias and from Mott-Schottky plots, slope concentrations p MS were determined at a reverse bias of 1.5 V. In a plot of L n against p MS , it was found that, despite much scatter in the experimental points, there was an apparent trend of L n decreasing by about an order of magnitude with increase of p MS from 10 16 to 10 17 cm -3 . Detailed proposals were then made to explain this trend. These were reduction of lifetime via Shockley-Read trapping with mobility decrease by impurity scattering, shunt resistance lowering by light and optical penetration depth reduction at shorter illumination wavelengths

Composition-controlled optical properties of colloidal CdSe quantum dots

Energy Technology Data Exchange (ETDEWEB)

Ayele, Delele Worku [Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Department of Chemistry, Bahir Dar University, Bahir Dar (Ethiopia); Su, Wei-Nien, E-mail: wsu@mail.ntust.edu.tw [Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Chou, Hung-Lung [Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Pan, Chun-Jern [Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Hwang, Bing-Joe, E-mail: bjh@mail.ntust.edu.tw [Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); National Synchrotron Radiation Research Center, Hsinchu 300, Taiwan (China)

2014-12-15

Graphical abstract: - Highlights: • The surface of CdSe QDs are modified with cadmium followed by selenium. • The optical properties of CdSe QDs can be controlled by manipulating the composition. • Surface compositional change affects the surface defects or traps and recombination. • The surface trapping state can be controlled by tuning the surface composition. • A change in composition shows a change in the carrier life time. - Abstract: A strategy with respect to band gap engineering by controlling the composition of CdSe quantum dots (QDs) is reported. After the CdSe QDs are prepared, their compositions can be effectively manipulated from 1:1 (Cd:Se) CdSe QDs to Cd-rich and then to Se-rich QDs. To obtain Cd-rich CdSe QDs, Cd was deposited on equimolar CdSe QDs. Further deposition of Se on Cd-rich CdSe QDs produced Se-rich CdSe QDs. The compositions (Cd:Se) of the as-prepared CdSe quantum dots were acquired by Energy-dispersive X-ray spectroscopy (EDX). By changing the composition, the overall optical properties of the CdSe QDs can be manipulated. It was found that as the composition of the QDs changes from 1:1 (Cd:Se) CdSe to Cd-rich and then Se-rich CdSe, the band gap decreases along with a red shift of UV–vis absorption edges and photoluminescence (PL) peaks. The quantum yield also decreases with surface composition from 1:1 (Cd:Se) CdSe QDs to Cd-rich and then to Se-rich, largely due to the changes in the surface state. Because of the involvement of the surface defect or trapping state, the carrier life time increased from the 1:1 (Cd:Se) CdSe QDs to the Cd-rich to the Se-rich CdSe QDs. We have shown that the optical properties of CdSe QDs can be controlled by manipulating the composition of the surface atoms. This strategy can potentially be extended to other semiconductor nanocrystals to modify their properties.

Composition-controlled optical properties of colloidal CdSe quantum dots

International Nuclear Information System (INIS)

Ayele, Delele Worku; Su, Wei-Nien; Chou, Hung-Lung; Pan, Chun-Jern; Hwang, Bing-Joe

2014-01-01

Graphical abstract: - Highlights: • The surface of CdSe QDs are modified with cadmium followed by selenium. • The optical properties of CdSe QDs can be controlled by manipulating the composition. • Surface compositional change affects the surface defects or traps and recombination. • The surface trapping state can be controlled by tuning the surface composition. • A change in composition shows a change in the carrier life time. - Abstract: A strategy with respect to band gap engineering by controlling the composition of CdSe quantum dots (QDs) is reported. After the CdSe QDs are prepared, their compositions can be effectively manipulated from 1:1 (Cd:Se) CdSe QDs to Cd-rich and then to Se-rich QDs. To obtain Cd-rich CdSe QDs, Cd was deposited on equimolar CdSe QDs. Further deposition of Se on Cd-rich CdSe QDs produced Se-rich CdSe QDs. The compositions (Cd:Se) of the as-prepared CdSe quantum dots were acquired by Energy-dispersive X-ray spectroscopy (EDX). By changing the composition, the overall optical properties of the CdSe QDs can be manipulated. It was found that as the composition of the QDs changes from 1:1 (Cd:Se) CdSe to Cd-rich and then Se-rich CdSe, the band gap decreases along with a red shift of UV–vis absorption edges and photoluminescence (PL) peaks. The quantum yield also decreases with surface composition from 1:1 (Cd:Se) CdSe QDs to Cd-rich and then to Se-rich, largely due to the changes in the surface state. Because of the involvement of the surface defect or trapping state, the carrier life time increased from the 1:1 (Cd:Se) CdSe QDs to the Cd-rich to the Se-rich CdSe QDs. We have shown that the optical properties of CdSe QDs can be controlled by manipulating the composition of the surface atoms. This strategy can potentially be extended to other semiconductor nanocrystals to modify their properties

An insight into the optical properties of CdSe quantum dots during their growth in bovine serum albumin solution

International Nuclear Information System (INIS)

Singh, Avinash; Ahmed, M.; Guleria, A.; Singh, A.K.; Adhikari, S.; Rath, M.C.

2016-01-01

Bovine serum albumin (BSA) assisted synthesis of cadmium selenide (CdSe) quantum dots (QDs) exhibits remarkable changes in the optical properties of the QDs as well as BSA during their growth. The growth of these QDs was investigated by recording the UV–visible absorption spectra and room temperature steady state fluorescence at different time intervals after the mixing of the precursors. The growth of these QDs was associated with a quenching of the fluorescence from BSA. The fluorescence from these QDs was found to be associated with several features: (1) a gradual red-shift in its peak position, (2) increase in intensity with an isoemissive point up to few minutes from the time of mixing of the two precursors, and (3) subsequent decrease in intensity reaching a minimum value, which remains almost unchanged thereafter. The decrease and increase in the fluorescence from BSA and CdSe QDs, respectively have been explained on the basis of Förster resonance energy transfer (FRET) as well as the simultaneous growth of these QDs. - Highlights: • CdSe quantum dots were synthesized in the presence of bovine serum albumin (BSA). • Fluorescence from BSA was quenched by during the growth of CdSe quantum dots. • There was an energy transfer from BSA to CdSe quantum dots during their growth. • The emission from CdSe quantum dots was associated with a red-shift.

PbSe Nanocrystal Excitonic Solar Cells

KAUST Repository

Choi, Joshua J.

2009-11-11

We report the design, fabrication, and characterization of colloidal PbSe nanocrystal (NC)-based photovoltaic test structures that exhibit an excitonic solar cell mechanism. Charge extraction from the NC active layer is driven by a photoinduced chemical potential energy gradient at the nanostructured heterojunction. By minimizing perturbation to PbSe NC energy levels and thereby gaining insight into the "intrinsic" photovoltaic properties and charge transfer mechanism of PbSe NC, we show a direct correlation between interfacial energy level offsets and photovoltaic device performance. Size dependent PbSe NC energy levels were determined by cyclic voltammetry and optical spectroscopy and correlated to photovoltaic measurements. Photovoltaic test structures were fabricated from PbSe NC films sandwiched between layers of ZnO nanoparticles and PEDOT:PSS as electron and hole transporting elements, respectively. The device current-voltage characteristics suggest a charge separation mechanism that Is distinct from previously reported Schottky devices and consistent with signatures of excitonic solar cells. Remarkably, despite the limitation of planar junction structure, and without film thickness optimization, the best performing device shows a 1-sun power conversion efficiency of 3.4%, ranking among the highest performing NC-based solar cells reported to date. © 2009 American Chemical Society.

Wide emission-tunable CdTeSe/ZnSe/ZnS core–shell quantum dots and their conjugation with E. coli O-157

Energy Technology Data Exchange (ETDEWEB)

Zhou, Haifeng [State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100 (China); Zhou, Guangjun, E-mail: gjzhou@sdu.edu.cn [State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100 (China); Zhou, Juan [Center for Disease Control and Prevention of Jinan Military Command, Jinan 250014 (China); Xu, Dong; Zhang, Xingshuang; Kong, Peng; Yang, Zhongsen [State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100 (China)

2015-05-15

Highlights: • QDs with variety morphology were obtained via an injection controlled process. • 3-D PL spectra of core–shell QDs show different excitation wavelength dependence. • The PL intensity of QDs with ZnSe transition layer increases dramatically. • Core–shell QDs were processed into aqueous phase and conjugated with E. coli O-157. - Abstract: Wide emission-tunable and different morphological alloyed CdTeSe quantum dots (QDs), CdTeSe/ZnS and CdTeSe/ZnSe/ZnS core–shell QDs were successfully synthesized via an injection controlled process. The effect of injection procedure and reaction temperature were systematically discussed and the growth mechanism was proposed. Most efficient PL wavelength was correlated with reaction time and temperature. The 3-D PL spectra of spherical bare CdTeSe and core–shell QDs with different passivation showed different excitation wavelength dependency. The PL intensity of CdTeSe/ZnSe/ZnS core–shell QDs increased greatly in comparison with that of CdTeSe and CdTeSe/ZnSe QDs. ZnSe transition layer played an important role in improving the PL intensity by providing a smoothened interface and gradient band offsets. The core–shell QDs were transferred into aqueous phase and successfully conjugated with Escherichia coli O-157. The proposed phase-transfer and bio-labeling strategy may be applicable to various QDs with different compositions.

Complexation in the system K2SeO4-UO2SeO4-H2O

International Nuclear Information System (INIS)

Serezhkina, L.B.; Kuchumova, N.V.; Serezhkin, V.N.

1994-01-01

Complexation in the system K 2 SeO 4 -UO 2 SeO 4 -H 2 O at 25 degrees C is studied by isothermal solubility. Congruently soluble K 2 UO 2 (SeO 4 ) 2 ·4H 2 O (I) and incongruently soluble K 2 (UO 2 ) 2 (SeO 4 ) 3 ·6H 2 O (II) are observed. The unit-cell constants of I and II are determined from an X-ray diffraction investigation. For I, a = 12,969, b = 11.588, c = 8.533 angstrom, Z = 4, space group Pmmb. For II, a = 23.36, b = 6.784, c = 13.699 angstrom, β = 104.42 degrees, Z = 4, space group P2/m, P2, or Pm. Complexes I and II are representatives of the crystal-chemical groups AB 2 2 M 1 and A 2 T 3 3 M 1 , respectively, of uranyl complexes

Origin of low thermal conductivity in SnSe

Science.gov (United States)

Xiao, Yu; Chang, Cheng; Pei, Yanling; Wu, Di; Peng, Kunling; Zhou, Xiaoyuan; Gong, Shengkai; He, Jiaqing; Zhang, Yongsheng; Zeng, Zhi; Zhao, Li-Dong

2016-09-01

We provide direct evidence to understand the origin of low thermal conductivity of SnSe using elastic measurements. Compared to state-of-the-art lead chalcogenides Pb Q (Q =Te , Se, S), SnSe exhibits low values of sound velocity (˜1420 m /s ) , Young's modulus (E ˜27.7 GPa ) , and shear modulus (G ˜9.6 GPa ) , which are ascribed to the extremely weak Sn-Se atomic interactions (or bonds between layers); meanwhile, the deduced average Grüneisen parameter γ of SnSe is as large as ˜3.13, originating from the strong anharmonicity of the bonding arrangement. The calculated phonon mean free path (l ˜ 0.84 nm) at 300 K is comparable to the lattice parameters of SnSe, indicating little room is left for further reduction of the thermal conductivity through introducing nanoscale microstructures and microscale grain boundaries. The low elastic properties indicate that the weak chemical bonding stiffness of SnSe generally causes phonon modes softening which eventually slows down phonon propagation. This work provides insightful data to understand the low lattice thermal conductivity of SnSe.

Attempting to realize n-type BiCuSeO

Science.gov (United States)

Zhang, Xiaoxuan; Feng, Dan; He, Jiaqing; Zhao, Li-Dong

2018-02-01

As an intrinsic p-type semiconductor, BiCuSeO has been widely researched in the thermoelectric community, however, n-type BiCuSeO has not been reported so far. In this work, we successfully realized n-type BiCuSeO through carrying out several successive efforts. Seebeck coefficient of BiCuSeO was increased through introducing extra Bi/Cu to fill the Bi/Cu vacancies that may produce holes, and the maximum Seebeck coefficient was increase from +447 μVK-1 for undoped BiCuSeO to +638 μVK-1 for Bi1.04Cu1.05SeO. The Seebeck coefficient of Bi1.04Cu1.05SeO was changed from p-type to n-type through electron doping through introducing Br/I in Se sites, the maximum negative Seebeck coefficient can reach ∼ -465 μVK-1 and -543 μVK-1 for Bi1.04Cu1.05Se1-xIxO and Bi1.04Cu1.05Se1-xBrxO, respectively. Then, after compositing Bi1.04Cu1.05Se0.99Br0.01O with Ag, n-type BiCuSeO can be absolutely obtained in the whole temperature range of 300-873 K, the maximum ZT 0.05 was achieved at 475 K in the Bi1.04Cu1.05Se0.99Br0.01O+15% Ag. Our report indicates that it is possible to realize n-type conducting behaviors in BiCuSeO system.

Immobilization of Se and U by iron sulfides

International Nuclear Information System (INIS)

Kang Mingliang; Ma Bin; Yang Zhuanwei; Liu Chunli; Chen Fanrong

2014-01-01

Both uranium and selenium are redox-sensitive, and can occur in several oxidation states. In reducing environments, they exist as insoluble forms. Therefore, reductive precipitation is the most effective way to immobilize U and Se. The interaction of aqueous Se (IV) and uranylwithiron sulfidesweresystematically investigated in light of thermodynamic calculations, X-ray Absorption Spectroscopy (XAS), and X-ray Photoelectron Spectroscopy (XPS). The results from the speciation study revealed that the reduction product was Se (O) when natural pyrite and pyrrhotitereacted with Se (IV), although FeSe 2 is the thermodynamically predicted product from nearly neural to alkaline conditions. This discrepancy is attributed to the oxidizing ability of Se (IV) towards FeSe 2 , of which produce the insoluble Se (0) as the stable product in short-term experiments. In contrast to the thermodynamic calculations, with a reaction product of mixed U (IV) and U (VI) (e.g., U 3 O 8 ), redox reaction was observed only at pH ∼ 8.5 and ∼ 4.5 for U (VI) reduction by nanosized pyrite and natural pyrite, respectively. We proposed that oxidation of pyrite needs an intermediate (e.g., Fe 2+ ), and the reaction between the uranyl and the intermediate is thermodynamically or kinetically limited. Moreover, trace elements generally held within pyrite structure can also greatly influence its reactivity. This study demonstrated that reaction kinetics play a significant role on the reaction product. From a geological time scale, Se and U are likely to be immobilized by iron sulfides via the form of FeSe 2 and UO 2 . (authors)

Nonlinear dynamics of magnetic vortices in single-crystal and ion-damaged NbSe2

International Nuclear Information System (INIS)

Zhang, J.; De Long, L.E.; Majidi, V.; Budhani, R.C.

1996-01-01

Nonlinear dynamics of magnetic flux lines in superconducting NbSe 2 are studied using the vibrating-reed technique and a resonance-line-shape analysis. A yield point for plastic deformation of the flux-line lattice is linked to the onset of a dissipation anomaly previously associated with a flux-line lattice melting transition. The resonance (10 kHz range) of radiation-damaged samples bifurcates into patterned sidebands at high drives, with additional nonlinear response emerging above 200 kHz, which may signal the onset of chaos. copyright 1996 The American Physical Society

Chemical and structural evolution in the Th-SeO3(2-)/SeO4(2-) system: from simple selenites to cluster-based selenate compounds.

Science.gov (United States)

Xiao, Bin; Langer, Eike; Dellen, Jakob; Schlenz, Hartmut; Bosbach, Dirk; Suleimanov, Evgeny V; Alekseev, Evgeny V

2015-03-16

While extensive success has been gained in the structural chemistry of the U-Se system, the synthesis and characterization of Th-based Se structures are widely unexplored. Here, four new Th-Se compounds, α-Th(SeO3)2, β-Th(SeO3)2, Th(Se2O5)2, and Th3O2(OH)2(SeO4)3, have been obtained from mild hydrothermal or low-temperature (180-220 °C) flux conditions and were subsequently structurally and spectroscopically characterized. The crystal structures of α-Th(SeO3)2 and β-Th(SeO3)2 are based on ThO8 and SeO3 polyhedra, respectively, featuring a three-dimensional (3D) network with selenite anions filling in the Th channels along the a axis. Th(Se2O5)2 is a 3D framework composed of isolated ThO8 polyhedra interconnected by [Se2O5](2-) dimers. Th3O2(OH)2(SeO4)3 is also a 3D framework constructed by octahedral hexathorium clusters [Th6(μ3-O)4(μ3-OH)4](12+), which are interlinked by selenate groups SeO4(2-). The positions of the vibrational modes associated with both Se(IV)O3(2-) and Se(VI)O4(2-) units, respectively, were determined for four compounds, and the Raman spectra of α- and β-Th(SeO3)2 are compared and discussed in detail.

79Se: geochemical and crystallo-chemical retardation mechanisms

International Nuclear Information System (INIS)

Chen, F.; Ewing, R.C.

1999-01-01

79 Se is a long-lived (1.1 x 10 6 yrs) fission product which is chemically and radiologically toxic. Under Eh-pH conditions typical of oxidative alteration of spent nuclear fuel, selenite, SeO 3 2- or HSeO 3 - or selenate, SeO 4 2- , are the dominant aqueous species of selenium. Because of the high solubility of metal-selenites and metal-selenates and the low adsorption of selenite and selenate aqueous species by geological materials under alkaline conditions, selenium may be highly mobile. However, 79 Se released from altered fuel may become immobilized by incorporation into secondary uranyl phases as low concentration impurities, and this may significantly reduce the mobility of selenium. Analysis and comparison of the known structures of uranyl phases indicate that (SeO 3 ) may substitute for (SiO 3 OH) in structures of α-uranophane and boltwoodite that are expected to be the dominant alteration products of UO 2 in Si-rich groundwater. The substitutions (SeO 3 ) (SiO 3 OH) in sklodowskite, Mg[(UO 2 )(SiO 3 OH)] 2 (H 2 O) 6 and (SeO 3 ) (PO 4 ) in phurcalite, Ca 2 [(UO 2 ) 3 (PO 4 ) 2 O 2 ](H 2 O) 7 , may occur with the eliminated apical anion being substituted for by an H 2 O group, but experimental investigation is required. The close similarity between the sheets in the structures of rutherfordine, [(UO 2 )(CO 3 )] and [(UO 2 )(SeO 3 )] implies that the substitution (SeO 3 ) (CO 3 ) can occur in rutherfordine, and possibly other uranyl carbonates. However, the substitutions: (SeO 3 ) (SiO 4 ) in soddyite and (SeO 3 ) (PO 4 ) in phosphuranylite may disrupt their structural connectivity and are, therefore, unlikely. (orig.)

Exotic topological insulator states and topological phase transitions in Sb2Se3-Bi2Se3 heterostructures

KAUST Repository

Zhang, Qianfan

2012-03-27

Topological insulator is a new state of matter attracting tremendous interest due to its gapless linear dispersion and spin momentum locking topological states located near the surface. Heterostructures, which have traditionally been powerful in controlling the electronic properties of semiconductor devices, are interesting for topological insulators. Here, we studied the spatial distribution of the topological state in Sb 2Se 3-Bi 2Se 3 heterostructures by first-principle simulation and discovered that an exotic topological state exists. Surprisingly, the state migrates from the nontrivial Bi 2Se 3 into the trivial Sb 2Se 3 region and spreads across the entire Sb 2Se 3 slab, extending beyond the concept of "surface" state while preserving all of the topological surface state characteristics. This unusual topological state arises from the coupling between different materials and the modification of electronic structure near Fermi energy. Our study demonstrates that heterostructures can open up opportunities for controlling the real-space distribution of the topological state and inducing quantum phase transitions between topologically trivial and nontrivial states. © 2012 American Chemical Society.

Formation and properties of epitaxial CdSe, ZnSe quantum dots. Conventional molecular beam epitaxy and related techniques

Energy Technology Data Exchange (ETDEWEB)

Mahapatra, Suddhasatta

2008-01-16

This thesis systematically investigates three such alternative approaches, along with conventional MBE, with emphasis on the formation-mechanism of QDs, and optimization of their morphological and optical attributes. it is shown here that no distinct 3D islands are formed in MBE growth of CdSe on ZnSe. While CdSe heteroepitaxy occurs in the multilayer-mode at T{sub G}=300 C, a reentrant recovery of the layer-by-layer mode is reported in this thesis, for growth at T{sub G}<{proportional_to}240 C. In the second variant technique, formation of large and distinct islands is demonstrated by deposition of amorphous selenium (a-Se) onto a 2D CdSe epilayer at room temperature and its subsequent desorption at a higher temperature (T{sub D}=230 C). The process steps of the third variant technique, developed in course of this work, are very similar to those of the previous one-the only alteration being the substitution of selenium with tellurium as the cap-forming-material. (orig.)

Electron transport in a bilayer graphene/layered superconductor NbSe2 junction: effect of work function difference

Science.gov (United States)

Yarimizu, Katsuhide; Tomori, Hikari; Watanabe, Kenji; Taniguchi, Takashi; Kanda, Akinobu

2018-03-01

We have experimentally studied electron transport in a bilayer graphene (BLG)/layered superconductor NbSe2 junction encapsulated with hexagonal boron nitride. The junction exhibits nonlinear current-voltage characteristics which strongly depend on the gate voltage around the charge neutrality point (CNP) of the BLG. Besides, we observe that the gate voltage dependence of electron transport in the BLG portion close to the junction interface is different from that of the BLG portion apart from the interface, indicating that the spatial variation of the Dirac point in the charge transfer region due to the difference in work function between superconductor and graphene needs to be considered in the analysis of the superconducting proximity effect.

In-situ XRD study of alloyed Cu2ZnSnSe4-CuInSe2 thin films for solar cells

International Nuclear Information System (INIS)

Hartnauer, Stefan; Wägele, Leonard A.; Jarzembowski, Enrico; Scheer, Roland

2015-01-01

We investigate the growth of Cu 2 ZnSnSe 4 -CuInSe 2 (CZTISe) thin films using a 2-stage (Cu-rich/Cu-free) co-evaporation process under simultaneous application of in-situ angle dispersive X-ray diffraction (XRD). In-situ XRD allows monitoring the phase formation during preparation. A variation of the content of indium in CZTISe leads to a change in the lattice constant. Single phase CZTISe is formed in a wide range, while at high In contents a phase separation is detected. Because of different thermal expansion coefficients, the X-ray diffraction peaks of ZnSe and CZTISe can be distinguished at elevated substrate temperatures. The formation of ZnSe appears to be inhibited even for low indium content. In-situ XRD shows no detectable sign for the formation of ZnSe. First solar cells of CZTISe have been prepared and show comparable performance to CZTSe. - Highlights: • In-situ XRD study of two-stage co-evaporated Cu 2 ZnSnSe 4 -CuInSe 2 alloyed thin films. • No detection of ZnSe with in-situ XRD due to Indium incorporation • Comparable efficiency of alloyed solar cells

Lattice thermal conductivity of LaSe

Energy Technology Data Exchange (ETDEWEB)

Li, Wei, E-mail: tolwwt@163.com [School of Physics and Telecommunication Engineering, South China Normal University, 510006 Guangzhou (China); Pan, Zhong-liang; Chen, Jun-fang; He, Qin-yu [School of Physics and Telecommunication Engineering, South China Normal University, 510006 Guangzhou (China); Wang, Teng [School of Computer, South China Normal University, 510631 Guangzhou (China)

2015-07-15

The phonon dispersions and phonon density of states of LaSe are obtained, based on density functional perturbation theory and the norm-conserving pseudo-potential method. An anomaly in calculated phonon dispersion curves is presented and interpreted as a Kohn anomaly. The heat capacity of LaSe is calculated then. For the three-phonon process scattering, the lowest non-harmonic cubic terms of the interatomic potential are considered to obtain single-phonon relaxation rate by applying the Fermi's golden rule. For the boundary scattering, the average phonon relaxation time was obtained. Considering two kinds of phonon scattering mechanisms, we obtain the lattice thermal conductivity of LaSe.

In situ observation of the formation of FeSe

DEFF Research Database (Denmark)

Grivel, Jean-Claude; Wulff, Anders Christian; Yue, Zhao

2011-01-01

The formation of the FeSe compound from a mixture of Fe and Se powders encased in a composite Cu/Nb sheath was studied in situ by means of high-energy synchrotron x-ray diffraction. Tetragonal beta-FeSe does not seem to form directly from the starting elements. Instead, a sequence of FeSe2, Fe3Se...

Histotopography of the radiopharmaceuticals 75Se-selenomethionine and 75Se-selenite in critical organs of adult and embryonic mice

International Nuclear Information System (INIS)

Khant, S.E.; Norets, T.A.

1981-01-01

Adult male and pregnant mice received 75 Se-labelled methionine and selenite, resp. The critical organs and the embryos were examined histoautoradiographically at different time intervals as to the organ distribution of the radiopharmaceuticals. All organs revealed a heterogeneity of the 75 Se distribution with an intensity being unequally organo-specific and depending on the type of the radiopharmaceutical. 75 Se-selenomethionine was deposited mainly in functional areas of kidneys, liver, bone marrow and testes thus causing a long-term retention and an intensive irradiation of these organs. In the embryos 75 Se-seleno-methionine was distributed unequally preferring liver, hematopoietic areas of the bone marrow and the lens

Dynamic equilibrium of endogenous selenium nanoparticles in selenite-exposed cancer cells: a deep insight into the interaction between endogenous SeNPs and proteins.

Science.gov (United States)

Bao, Peng; Chen, Song-Can; Xiao, Ke-Qing

2015-12-01

Elemental selenium (Se) was recently found to exist as endogenous nanoparticles (i.e., SeNPs) in selenite-exposed cancer cells. By sequestrating critical intracellular proteins, SeNPs appear capable of giving rise to multiple cytotoxicity mechanisms including inhibition of glycolysis, glycolysis-dependent mitochondrial dysfunction, microtubule depolymerization and inhibition of autophagy. In this work, we reveal a dynamic equilibrium of endogenous SeNP assembly and disassembly in selenite-exposed H157 cells. Endogenous SeNPs are observed both in the cytoplasm and in organelles. There is an increase in endogenous SeNPs between 24 h and 36 h, and a decrease between 36 h and 72 h according to transmission electron microscopy results and UV-Vis measurements. These observations imply that elemental Se in SeNPs could be oxidized back into selenite by scavenging superoxide radicals and ultimately re-reduced into selenide; then the assembly and disassembly of SeNPs proceed simultaneously with the sequestration and release of SeNP high-affinity proteins. There is also a possibility that the reduction of elemental Se to selenide pathway may lie in selenite-exposed cancer cells, which results in the assembly and disassembly of endogenous SeNPs. Genome-wide expression analysis results show that endogenous SeNPs significantly altered the expression of 504 genes, compared to the control. The endogenous SeNPs induced mitochondrial impairment and decreasing of the annexin A2 level can lead to inhibition of cancer cell invasion and migration. This dynamic flux of endogenous SeNPs amplifies their cytotoxic potential in cancer cells, thus provide a starting point to design more efficient intracellular self-assembling systems for overcoming multidrug resistance.

Quand voir c’est (faire penser. Motivation des chaînes anaphoriques et point de vue

Directory of Open Access Journals (Sweden)

Alain Rabatel

2004-01-01

Full Text Available Le point de vue narratif (PDV ne saurait se comprendre à partir de la pure et simple transposition des règles de perspective des sémiotiques de l’image fixe ou mobile : en effet, il serait naïf de croire analyser le PDV en ne recherchant dans les textes qu’un point de l’espace (analogue à celui occupé par le photographe, le peintre, le chef opérateur à partir duquel les objets seraient perçus et structurés, en laissant croire que ce point (Genette parle de « foyer » puisse être nettement i...

Influence of defect structure on magnetic and electronic properties of Hg1-x Crx Se and Hg1-x Cox Se

International Nuclear Information System (INIS)

Prozorovskij, V.D.; Reshidova, I.Yu.; Puzynya, A.I.; Paranchich, Yu.S.

1996-01-01

The results of experimental investigations of the Shubnikov-de Haas oscillations at superhigh frequencies, electron spin resonance, magnetic susceptibility, relaxation dielectric losses, and galvanomagnetic measurements in the Hg 1-x Cr x Se and Hg 1-x Co x Se single crystal samples are presented. Analysis of the results Hg 1-x Cr x Se and Hg 1-x Co x Se depend on the defect structure of the substance and the type of defects making this structure. The manifestation of critical phenomena in Hg 1-x Cr x Se also depends on the defect structure

Solving the shape conundrum in $^{70}$Se

CERN Multimedia

We propose a multi-step Coulomb-excitation study of $^{70}$Se at HIE-ISOLDE using the $^{208}$Pb( $^{70}$Se, $^{70}$Se*)$^{208}$Pb* reaction at a safe energy of 5.0 MeV/u. We aim at a precise measurement of the $\\left \\langle 2^{+}_{1} \\hspace{0.1cm} || \\hspace{0.1cm}\\hat{E}2 \\hspace{0.1cm} || \\hspace{0.1cm}2^{+}_{ 1} \\right \\rangle$ diagonal matrix element as well as gaining information on additional matrix elements. Such information will shed light onto the shape conundrum of the 2$^{+}_{1}$ state in $^{70}$Se as well as foreseeing the opportunity for a more detailed understanding of the shape-coexistence phenomenon in this region.

Novel red-emission of ternary ZnCdSe semiconductor nanocrystals

Science.gov (United States)

Chung, Shu-Ru; Wang, Kuan-Wen; Chen, Hong-Shuo; Chen, Hong-Hong

2015-02-01

The effect of chain lengths of fatty acids on the physical properties of CdSe and ZnCdSe semiconductor nanocrystals (NCs) synthesized by the colloidal chemistry procedure is investigated. The fatty acids, lauric acid (LA), and stearic acid (SA), with different lengths of carbon chains, are used to prepare CdSe and ZnCdSe NCs when hexyldecylamine (HDA) is applied as the sole surfactant. For CdSe-SA and ZnCdSe-SA, they have the same emission wavelength at 592 nm and the same particle size of 3.3 nm; however, their quantum yield (QY) is 75 and 16 %, respectively. In contrast, the emission wavelength of CdSe-LA and ZnCdSe-LA NCs is 609 and 615 nm, the particle size is about 3.5 and 4 nm under the same reaction time, and the QY of them are 33 and 59 %, respectively. The X-ray diffraction pattern shows that ZnCdSe NCs all have the wurtzite structure, and their main peaks are located between those of pure CdSe and ZnSe materials. The main phase of ZnCdSe-SA and ZnCdSe-LA is ZnSe and CdSe, respectively, implying that alloyed ZnCdSe NC can be prepared and ZnSe and CdSe phase can be promoted by SA and LA, respectively. Moreover, the QY of red-emission ZnCdSe-LA is higher than 50 %. These results suggest that the growth rate of CdSe as well as ZnCdSe NC can be enhanced by using LA as complex reagent and HDA as sole surfactant. It is expected that the reported effective synthetic strategy can be developed as a very practical, easy and not time-consuming approach to prepare red emissive NCs with high QY and high reproducibility.

Theoretical study of defects Cu{sub 3}SbSe{sub 4}: Search for optimum dopants for enhancing thermoelectric properties

Energy Technology Data Exchange (ETDEWEB)

Do, Dat T., E-mail: dodat@msu.edu; Mahanti, S.D., E-mail: mahanti@pa.msu.edu

2015-03-15

Highlights: • We present the first systematic study of defects in Cu{sub 3}SbSe{sub 4}. • Possible n-type and p-type dopants are suggested for Cu and Sb site. • Transition-metal substitutions on Sb potentially improve thermoelectric properties. • Transition-metal substitutions on Se strongly distort local crystal geometry. • p-type behavior of as synthesized Cu{sub 3}SbSe{sub 4} is most likely due to Cu. - Abstract: Cu{sub 3}SbSe{sub 4} is a promising thermoelectric material due to high thermopower (>400μV/K) at 300 K and higher. Although it has a simple crystal structure derived from zinc blende structure, previous work has shown that the physics of band gap formation is quite subtle due to the importance of active lone pair (5s{sup 2}) of Sb and the non-local exchange interaction between these and Se 5p electrons. Since for any application of semiconductors understanding the properties of defects is essential, we discuss the results of a systematic study of several point defects in Cu{sub 3}SbSe{sub 4} including vacancies and substitutions for each of the components. First principles calculations using density functional theory show that among variety of possible dopants, p-type doping can be done by substituting Sb with group IV elements including Sn, Ge, Pb and Ti and n-type doping can be done by replacing Cu by Mg, Zn. Doping at the Se site appears to be rather difficult. Electronic structure calculations also suggest that the p-type behavior seen in nominally pure Cu{sub 3}SbSe{sub 4} is most likely due to Cu vacancy rather than Se vacancy.

Liquidus Projection and Isothermal Section of the Sb-Se-Sn System

Science.gov (United States)

Chang, Jui-shen; Chen, Sinn-wen

2017-12-01

Sb-Se-Sn ternary alloys are promising chalcogenide materials. The liquidus projection and 673.2 K (400 °C) isothermal section of the Sb-Se-Sn ternary system are determined. Numerous Sb-Se-Sn alloys are prepared, and their primary solidification phases are examined. In addition to the three terminal phases, (Sb), (Se) and (Sn), there are Sb2Sn3, SbSn, SnSe, SnSe2, Sb2Se3, Sn2Sb9Se9, and SnSb2Se4 phases. In addition, there are two miscibility gaps along the Sb-Se and Se-Sn and sides. There are ten invariant reactions in the Sb-Se-Sn ternary system, and seven of them are experimentally determined in this study. The lowest reaction temperature of determined invariant reaction is L + SbSn = (Sn) + SnSe at 515.4 K ± 5 K (242.2 °C ± 5 °C). There are nine tie-triangles, which are Liquid + SbSn + SnSe, SbSn + SnSe + (Sb), SnSe + (Sb) + Sn2Sb9Se9, (Sb) + Sb2Se3 + Sn2Sb9Se9, SnSe + Sn2Sb9Se9 + SnSb2Se4, Sb2Se3 + Sn2Sb9Se9 + SnSb2Se4, SnSe + SnSe2 + SnSb2Se4, SnSe2 + SnSb2Se4 + Sb2Se3, and SnSe2 + Sb2Se3 + Liquid in the 673.2 K (400 °C) isothermal section of the Sb-Se-Sn ternary system.

Synthesis, crystal structure, optical, and electronic study of the new ternary thorium selenide Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2}

Energy Technology Data Exchange (ETDEWEB)

Prakash, Jai [Department of Chemistry, Northwestern University, Evanston, IL 60208-3113 (United States); Mesbah, Adel [Department of Chemistry, Northwestern University, Evanston, IL 60208-3113 (United States); ICSM, UMR 5257 CEA/CNRS/UM2/ENSCM, Site de Marcoule-Bât. 426, BP 17171, 30207 Bagnols-sur-Cèze cedex (France); Beard, Jessica [Department of Chemistry, Northwestern University, Evanston, IL 60208-3113 (United States); Lebègue, Sébastien [Laboratoire de Cristallographie, Résonance Magnétique et Modélisations (CRM2, UMR CNRS 7036), Institut Jean Barriol, Université de Lorraine, BP 239, Boulevard des Aiguillettes, 54506 Vandoeuvre-lès-Nancy (France); Malliakas, Christos D. [Department of Chemistry, Northwestern University, Evanston, IL 60208-3113 (United States); Ibers, James A., E-mail: ibers@chem.northwestern.edu [Department of Chemistry, Northwestern University, Evanston, IL 60208-3113 (United States)

2015-11-15

The compound Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} has been synthesized by solid-state methods at 1173 K. Its crystal structure features one-dimensional chains of {sup 1}{sub ∞}[Th(Se){sub 3}(Se{sub 2}){sub 2}{sup 6−}] separated by Ba{sup 2+} cations. Each Th atom in these chains is coordinated to two Se–Se single-bonded pairs and four Se atoms to give rise to a pseudooctahedral geometry around Th. The Th–Se distances are consistent with Th{sup 4+} and hence charge balance of Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} is achieved as 3×Ba{sup 2+}, 1×Th{sup 4+}, 3×Se{sup 2−}, and 2×Se{sub 2}{sup 2−}. From optical measurements the band gap of Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} is 1.96(2) eV. DFT calculations indicate that the compound is a semiconductor. - Graphical abstract: Local coordination environment of Th atoms in the Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} structure. - Highlights: • Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} has been synthesized by solid-state methods at 1173 K. • The structure features chains of {sup 1}{sub ∞}[Th(Se){sub 3}(Se{sub 2}){sub 2}{sup 6−}] separated by Ba{sup 2+} cations. • Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} is a semiconductor with a band gap of 1.96(2) eV.

Por uma cidade que se move e se comunica: corpo, rua e improviso

Directory of Open Access Journals (Sweden)

Julia Saldanha Vieira de Aguiar

2009-06-01

Full Text Available Este trabalho trata da relação de um lugar com suas pessoas. A reflexão acontece a partir de um estudo de caso: o Camelódromo da Praça XV. O Camelódromo foi uma grande feira, que durante 40 anos ocupou um espaço importante no centro de Porto Alegre/RS. (Auto organizado e vivido principalmente pelo povo, o fenômeno se configurava em um lugar onde improviso e estética constituiam o modo de ser e agir no cotidiano da rua. Ironicamente, no início de 2009, o Camelódromo foi transferido para dentro de um prédio. Hoje, onde se desenrolava o espetáculo do imprevisível, encontra-se um estacionamento para carros. Este trabalho foi produzido nos últimos meses do Camelódromo; em um espírito de elogio à estética do improviso e à auto-organização. Buscamos articular idéias da teoria da complexidade, do urbanismo, das artes e da comunicação, para tentar compreender um pouco essa manifestação espontânea, tão característica da urbe no século XXI.

La physique des tas de sable

CERN Document Server

Claudin, Philippe

2014-01-01

What is the difference between a pile of rocks and a heap of salt, between corn seeds and grains of quartz, between balls and marbles? For the physicist the answer is simple there is none or hardly any…Gravel, grains, seeds, rocks, sand, marbles, balls and powder belong to the same big family: granular materials. The physical and mechanical properties of these materials are rather surprising: they are halfway in between fluids and solids. This book focuses on a very specific property of granular materials: the vault effect. This phenomenon is essential to the understanding of the physics of sa

Synthesis of CdSe Quantum Dots Using Fusarium oxysporum

Directory of Open Access Journals (Sweden)

Takaaki Yamaguchi

2016-10-01

Full Text Available CdSe quantum dots are often used in industry as fluorescent materials. In this study, CdSe quantum dots were synthesized using Fusarium oxysporum. The cadmium and selenium concentration, pH, and temperature for the culture of F. oxysporum (Fusarium oxysporum were optimized for the synthesis, and the CdSe quantum dots obtained from the mycelial cells of F. oxysporum were observed by transmission electron microscopy. Ultra-thin sections of F. oxysporum showed that the CdSe quantum dots were precipitated in the intracellular space, indicating that cadmium and selenium ions were incorporated into the cell and that the quantum dots were synthesized with intracellular metabolites. To reveal differences in F. oxysporum metabolism, cell extracts of F. oxysporum, before and after CdSe synthesis, were compared using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE. The results suggested that the amount of superoxide dismutase (SOD decreased after CdSe synthesis. Fluorescence microscopy revealed that cytoplasmic superoxide increased significantly after CdSe synthesis. The accumulation of superoxide may increase the expression of various metabolites that play a role in reducing Se4+ to Se2− and inhibit the aggregation of CdSe to make nanoparticles.

Mechanical and magneto-electronic properties of half-metallic ferromagnetism in Ti-doped ZnSe and CdSe alloys: Ab initio study

Science.gov (United States)

El Amine Monir, Mohammed; Ullah, Hayat; Baltach, Hadj; Gulbahar Ashiq, M.; Khenata, R.

2017-11-01

In this article we have studied the structural, elastic, electronic and magnetic properties of Zn1-xTixSe and Cd1-xTixSe alloys at (x = 0.25, 0.50, 0.75) using first principles density functional theory calculations with local spin density approximation (LSDA) and generalized gradient approximation plus Hubbard parameter (GGA+U) as exchange-correlation potential. The physical properties of both alloys were investigated in the zinc-blend phase. The structural parameters at equilibrium are consistent with experimental and earlier theoretical predictions. The elastic constants are also computed and compared with the literature. The DOS curves of Zn1-xTixSe and Cd1-xTixSe alloys for all the concentrations show the existence of hybridization among Ti (3d) and Se (4p) states. The calculated exchange constants N0α(s-d) and N0β (p-d) are useful to determine the contribution in the valence band and conduction band and are also shows the magnetic character of these alloys. In addition, the p-d hybridization in the PDOS reduces local magnetic moment of Ti from its free space charge of 2 μB and results small magnetic moments on the nonmagnetic Zn, Cd and Se sites. The calculated negative values of formation energy (Ef) reveal that all the Zn1-xTixSe and Cd1-xTixSe alloys are thermodynamically stables. A larger/Smaller value of Curie temperature (TC) for all the Zn1-xTixSe and Cd1-xTixSe alloys shows the strong/low interaction among the magnetic atoms respectively.

Microbial Precipitation of Cr(III)-Hydroxide and Se(0) Nanoparticles During Anoxic Bioreduction of Cr(VI)- and Se(VI)-Contaminated Water.

Science.gov (United States)

Kim, Yumi; Oh, Jong-Min; Roh, Yul

2017-04-01

This study examined the microbial precipitations of Cr(III)-hydroxide and Se(0) nanoparticles during anoxic bioreductions of Cr(VI) and Se(VI) using metal-reducing bacteria enriched from groundwater. Metal-reducing bacteria enriched from groundwater at the Korea Atomic Energy Research Institute (KAERI) Underground Research Tunnel (KURT), Daejeon, S. Korea were used. Metal reduction and precipitation experiments with the metal-reducing bacteria were conducted using Cr(VI)- and Se(VI)-contaminated water and glucose as a carbon source under an anaerobic environment at room temperature. XRD, SEM-EDX, and TEM-EDX analyses were used to characterize the mineralogy, crystal structure, chemistry, shape, and size distribution of the precipitates. The metal-reducing bacteria reduced Cr(VI) of potassium chromate (K₂CrO₄) to Cr(III) of chromium hydroxide [Cr(OH)3], and Se(VI) of sodium selenate (Na₂SeO₄) to selenium Se(0), with changes of color and turbidity. XRD, SEM-EDX, and TEM-EDX analyses revealed that the chromium hydroxide [Cr(OH)₃] was formed extracellularly with nanoparticles of 20–30 nm in size, and elemental selenium Se(0) nanoparticles had a sphere shape of 50–250 nm in size. These results show that metal-reducing bacteria in groundwater can aid or accelerate precipitation of heavy metals such as Cr(VI) and Se(VI) via bioreduction processes under anoxic environments. These results may also be useful for the recovery of Cr and Se nanoparticles in natural environments.

Ud at se med Erasmus

DEFF Research Database (Denmark)

Frandsen, Pernille

2009-01-01

Få lidt luft under vingerne, kom ud at møde udenlandske kolleger og se, hvordan man også kan lave uddannelsesbibliotek. Med begejstring fortæller tre bibliotekarer om deres oplevelser i det store udland – alt sammen finansieret af Erasmus.......Få lidt luft under vingerne, kom ud at møde udenlandske kolleger og se, hvordan man også kan lave uddannelsesbibliotek. Med begejstring fortæller tre bibliotekarer om deres oplevelser i det store udland – alt sammen finansieret af Erasmus....

Effects of hydrostatic pressure on the thermoelectric properties of the ɛ-polytype of InSe, GaSe, and InGaSe2 semiconductor compounds: an ab initio study

Science.gov (United States)

Elsayed, H.; Olguín, D.; Cantarero, A.

2017-12-01

This work presents an ab initio study of the effects of hydrostatic pressure on the Seebeck coefficients and thermoelectric power factors of the ɛ-polytype of InSe, GaSe, and InGaSe2 semiconductor compounds. Our study is performed using the semi-classical Boltzmann theory and the rigid band approach. The electronic band structures of these materials are calculated using the full-potential linearized augmented plane-wave method. The obtained thermoelectric properties are discussed in terms of the results of the electronic structure calculations. As we will show, our calculated Seebeck coefficient values indicate that these materials are good alternatives to other well-studied thermoelectric systems.

Relief influence on tree species richness in secondary forest fragments of Atlantic Forest, SE, Brazil

OpenAIRE

Silva,William Goulart da; Metzger,Jean Paul; Bernacci,Luis Carlos; Catharino,Eduardo Luís Martins; Durigan,Giselda; Simões,Sílvio

2008-01-01

The aim of this work was to explore the relationship between tree species richness and morphological characteristics of relief at the Ibiúna Plateau (SE Brazil). We sampled 61 plots of 0.30 ha, systematically established in 20 fragments of secondary forest (2-274 ha) and in three areas within a continuous secondary forest site, Morro Grande Reserve (9,400 ha). At each plot, 100 trees with diameter at breast height > 5 cm were sampled by the point centered quarter method, and total richness an...

VerSeDa: vertebrate secretome database.

Science.gov (United States)

Cortazar, Ana R; Oguiza, José A; Aransay, Ana M; Lavín, José L

2017-01-01

Based on the current tools, de novo secretome (full set of proteins secreted by an organism) prediction is a time consuming bioinformatic task that requires a multifactorial analysis in order to obtain reliable in silico predictions. Hence, to accelerate this process and offer researchers a reliable repository where secretome information can be obtained for vertebrates and model organisms, we have developed VerSeDa (Vertebrate Secretome Database). This freely available database stores information about proteins that are predicted to be secreted through the classical and non-classical mechanisms, for the wide range of vertebrate species deposited at the NCBI, UCSC and ENSEMBL sites. To our knowledge, VerSeDa is the only state-of-the-art database designed to store secretome data from multiple vertebrate genomes, thus, saving an important amount of time spent in the prediction of protein features that can be retrieved from this repository directly. VerSeDa is freely available at http://genomics.cicbiogune.es/VerSeDa/index.php. © The Author(s) 2017. Published by Oxford University Press.

Raman scattering and structural analysis of electrodeposited CuInSe2 and S-rich quaternary CuIn(S,Se)2 semiconductors for solar cells

International Nuclear Information System (INIS)

Izquierdo-Roca, Victor; Fontane, Xavier; Morante, Joan Ramon; Saucedo, Edgardo; Ruiz, Carmen M.; Grand, Pierre-Philippe; Jaime-Ferrer, Jesus Salvador; Bermudez, Veronica; Calvo-Barrio, Lorenzo; Alvarez-Garcia, Jacobo; Perez-Rodriguez, Alejandro

2009-01-01

This work reports the Raman scattering characterisation of CuInSe 2 precursors grown by single step electrodeposition and the corresponding layers recrystallised under sulphurising conditions for solar cell devices. The analysis of the spectra measured on the as-grown precursors has allowed identifying the main secondary phases in these layers with elemental Se, Cu-Se phases and chalcopyrite Cu-poor ordered vacancy domains. To deepen in the identification of the Cu-Se phases, these measurements have been correlated with the analysis of binary Cu-Se layers. The experimental data indicate that formation of both Se and Cu-Se phases is likely controlled by the Se content in the layers. For values of stoichiometry below 1.15, excess Cu in the layers is accommodated in a phase with very low Raman efficiency (as Cu 2 Se). Increasing the content of Se leads to an increase in the spectral contribution from both Se and Cu 2-x Se, being the formation of these phases likely favoured under high excess Se conditions. The characterisation of the corresponding recrystallised layers has allowed analysing the impact of the presence of the secondary phases in the as-grown absorbers on the performance of the final solar cells. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Determination of the optimal conditions for simultaneous production of 73SE and 75SE radioisotopes in a 30 MeV cyclotron

International Nuclear Information System (INIS)

Pejman Rowshanfazad; Amirreza Jalilian; Mahsheed Sabet

2004-01-01

Purpose: 73 Se and 75 Se radioisotopes are widely used in medicine, industry and agriculture. 75 Se is used in high activity brachytherapy (1), assessment of pancreatic exocrine function (2, 3), study of bile acids and evaluation of illeal function (4, 5, 6), industrial radiography (7, 8) and as a tracer in the assessment of chemical, biochemical, biophysical processes, metabolic research and agricultural studies. 73 Se is used in pancreas scanning (9), hyperthyroidism diagnosis(10), adrenal scanning (11), tumor detection (12, 13, 14), detection of brain dopamine receptors (15), parathyroid tumor detection (10) and detection of brain blood flow (16). These radioisotopes were selected to be produced in the country according to their wide range of applications. The idea of simultaneous production of 73 Se and 75 Se arouse after the completion of primary studies. Important physical characteristics of these radioisotopes are shown in table l. Methods: 1 Selection of the Best Reaction. Various nuclear reactions which may be used for the production of 73 Se and 75 Se are shown in table 2 (17, 18, 19). Among the above reactions, those which use α and 3 He as the projectile particles were discarded since high energy and high intensity beams of α and 3 He are not available in the country at present. Those reactions which used 74 Se and 76 Se as the target material could not be used, since these isotopes have low isotopic values (0.87% and 9.02% respectively), and their chemical separation processes are difficult, expensive and time-taking, due to the equal chemical properties of the product and the target material (20). Thus 75 As(p, n) 75 Se seemed to be the most appropriate reaction for the production of 75 Se. The 75 As(d, 4n) 73 Se reaction is not as suitable as 75 As(p, 3n) 73 Se, because of the lower radionuclidic purity of the product (18). Thus the best reaction for the production of 73 Se was determined to be 75 As(p, 3n) 73 Se. There was no need for an isotopic

Seed-mediated direct growth of CdSe nanoclusters on substrates

International Nuclear Information System (INIS)

Pan Shangke; Ebrahim, Shaker; Soliman, Moataz; Qiao Qiquan

2013-01-01

Different shapes of CdSe nanostructures were obtained by hydrothermal method with varied Se sources and buffer layers. Hexagonal nanoparticles of CdSe with Wurtzite structure were synthesized from Se powder resource, while CdSe nanoclusters with Wurtzite structure were grown from Na 2 SeO 3 aqueous solution resources at 165 °C using cetyltrimethylammonium bromide as surfactant. Using ZnO nanoparticles as a seed layer, CdSe nanostructures only partially covered the indium tin oxide (ITO) substrates. With ZnO/CdSe quantum dots composite seed layer, CdSe nanostructures fully covered the ITO substrates.

Exotic topological insulator states and topological phase transitions in Sb2Se3-Bi2Se3 heterostructures

KAUST Repository

Zhang, Qianfan; Zhang, Zhiyong; Zhu, Zhiyong; Schwingenschlö gl, Udo; Cui, Yi

2012-01-01

in controlling the electronic properties of semiconductor devices, are interesting for topological insulators. Here, we studied the spatial distribution of the topological state in Sb 2Se 3-Bi 2Se 3 heterostructures by first-principle simulation and discovered

The synthesis and photocatalytic activity of ZnSe microspheres

International Nuclear Information System (INIS)

Cao Huaqiang; Xiao Yujiang; Zhang Sichun

2011-01-01

This paper reports the synthesis of semiconductor ZnSe microspheres composed of nanoparticles via a solvothermal route between the organic molecule selenophene (C 4 H 4 Se) and ZnCl 2 without adding any surfactant. The ZnSe microspheres were characterized by x-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), specific surface area measurement, and photoluminescence (PL) spectra. A strong and broad blue PL emission at 443 nm in wavelength (∼2.79 eV in photon energy) is attributed to the near-band-edge (NBE) emission of ZnSe, while the 530 nm peak is a defect-related (DL) emission. The photocatalytic activity of the as-prepared ZnSe microspheres was evaluated by photodegradation of methyl orange (MO) dye under ultraviolet (UV) light and visible light irradiation. The degradations of MO reach 94% or 95.1%, close to 100%, in the presence of the as-synthesized ZnSe microspheres or commercial ZnSe powder after 7 or 10 h under UV irradiation, respectively. Meanwhile the degradations of MO reach 94.3% or 60.6% in the presence of the as-synthesized ZnSe microspheres or commercial ZnSe powder after 12 h, respectively. The degradation rate of ZnSe microspheres is twice that of ZnSe commercial powder under UV light irradiation, and three times under visible light irradiation. The degradation process of MO dye on ZnSe microspheres under UV or visible light is also discussed.

¿Y, cómo se hacen?

Directory of Open Access Journals (Sweden)

Juan Ruiz

2015-01-01

Full Text Available El mundo de los dibujos animados es producto de la imaginación, de la fantasía que vuela en los sueños de los hombres de cualquier edad. El artículo relata la forma en cómo estos simpáticos personajes, que vemos a diario en el cine o la televisión, pueden moverse tan libremente y con tanto desenfado. Se parte de la idea o argumento, el guionista narra la historia de lo que será el animado. Luego el director con un dibujante trazan las escenas principales de la historia (storyboard o guión dibujado se discute con los artistas y realizadores del filme; una vez aprobado este se perfila el diseño de los personajes, se realiza la escenografía (maquetas de ser necesario. Se hacen los parlamentos o diálogos de los personajes para que actores(as pongan las voces y sigue el proceso más fino y técnico.

Sequence and batch language programs and alarm-related ``C`` programs for the 242-A MCS. Revision 2

Energy Technology Data Exchange (ETDEWEB)

Berger, J.F.

1995-03-01

A Distributive Process Control system was purchased by Project B-534, ``242-A Evaporator/Crystallizer Upgrades``. This control system, called the Monitor and Control System (MCS), was installed in the 242-A Evaporator located in the 200 East Area. The purpose of the MCS is to monitor and control the Evaporator and monitor a number of alarms and other signals from various Tank Farm facilities. Applications software for the MCS was developed by the Waste Treatment Systems Engineering (WTSE) group of Westinghouse. The standard displays and alarm scheme provide for control and monitoring, but do not directly indicate the signal location or depict the overall process. To do this, WTSE developed a second alarm scheme which uses special programs, annunciator keys, and process graphics. The special programs are written in two languages; Sequence and Batch Language (SABL), and ``C`` language. The WTSE-developed alarm scheme works as described below: SABL relates signals and alarms to the annunciator keys, called SKID keys. When an alarm occurs, a SABL program causes a SKID key to flash, and if the alarm is of yellow or white priority then a ``C`` program turns on an audible horn (the D/3 system uses a different audible horn for the red priority alarms). The horn and flashing key draws the attention of the operator.

The influence of CdSe and ZnSe nanoparticles on the optical properties of Sm"3"+ ions in lead borate glasses

International Nuclear Information System (INIS)

Mallur, Saisudha B.; Heidorn, William D.; Fatokun, Stephen O.; Joshi, Krishna D.; Bista, Sandip S.; Babu, Panakkattu K.

2017-01-01

The effect of glass composition and the presence of CdSe/ZnSe nanoparticles (NPs) on the optical absorption and fluorescence of Sm-doped lead borate glasses are studied. Three sets of glass samples xPbO:(99.5-x) B_2O_3:0.5Sm_2O_3, x = 29.5–69.5 mol%, xPbO:(96.5-x) B_2O_3:0.5Sm_2O_3: 3CdSe/ZnSe, x = 36.5, and 56.5 mol% are prepared. NPs are grown by annealing these glasses just below the glass transition temperature. Average size of both types of NPs increases with annealing time; however, CdSe NPs grew to a larger size range (2 to 20 nm) compared to ZnSe NPs (1 to 16 nm). We analyzed the hypersensitive transition, intensity parameters, radiative transition probability, stimulated emission cross section (σ_p), and the area ratio of the electric dipole/magnetic dipole transitions of Sm"3"+. The intensity parameters show a minimum at 11 h annealing for 36.5 mol% and a maximum for the same annealing duration in 56.5 mol% PbO containing CdSe NPs. The σ_p for 56.5 mol% of PbO with CdSe NPs is found to be a maximum when the average NP size is around 14 nm. ZnSe NPs containing glasses also show significant changes in σ_p when the average particle size is ~16 nm, for 36.5 mol% PbO. Our results suggest that the optical properties of Sm"3"+ in lead borate glasses are sensitive to its electronic environment which can be modified by varying the base glass composition and/or incorporating large NPs of CdSe/ZnSe. The large σ_p values that we observe for some of the glass compositions make them attractive materials for photonic devices and photovoltaic applications.

Variation of Se, Zn, Co, Fe and Rb distribution in rats upon sequence of injection with SeO2 and glutathione

International Nuclear Information System (INIS)

Czauderna, M.; Samochocka, K.; Kwiathkowska, J.

1984-01-01

The contents of Se, Zn, Co, Fe and Rb in several organs of Wistar rats were determined by instrumental neutron activation analysis (INAA) after injections of SeO 2 and glutathione (GSH). Se was incorporated in all the examined organs, and the efficiency of incorporation does not depend upon the sequence of injection with SeO 2 and GSH. The sequence of these injections affects the contents of the other elements in all the examined organs. (author)

Effect of impurity inhomogeneity of CdS and CdSe monocrystalline semiconductors on electron absorption of piezoactive ultrasonic waves

International Nuclear Information System (INIS)

Ketis, B.P.; Krivka, I.

1986-01-01

Relation of observed anomalies (deviations from predictions of theory for homogeneous piezosemiconductor) of electronic absorption coefficient (EAC) of volume, piezoactive acoustic waves (with 15 MHz frequency) in CdS and CdSe hexagonal crystals with electrical heterogeneity is shown experimentally. Results of electron microanalysis of CdS and CdSe piezosemiconductors confirmed their impurity heterogeneity are presented as well as data of investigations into high-frequency conduction and electronic absorption of ultrasonic waves pointing out to volume nature of impurity and electric heterogeneities of monocrystals investigated. Correlation between EAC anomalies and surface density of impurity aggregates (IA) is noted as well as coincidence of impurity and electrical heterogeneities in CdS and CdSe crystals. In CdS crystals the observed anisotropy of high-frequency conduction and volume radioactive ultrasonic waves EAC is attributed to high density and anisotropy of IA space distribution and shape. To explain EAC anomalies, a crystal is simulated with heterogeneous grid of resistances and condensators

Instantaneous preparation of CuInSe2 films from elemental In, Cu, Se particles precursor films in a non-vacuum process

International Nuclear Information System (INIS)

Kaigawa, R.; Uesugi, T.; Yoshida, T.; Merdes, S.; Klenk, R.

2009-01-01

CuInSe 2 (CIS) films are successfully prepared by means of non-vacuum, instantaneous, direct synthesis from elemental In, Cu, Se particles precursor films without prior synthesis of CIS nanoparticle precursors and without selenization with H 2 Se or Se vapor. Our precursor films were prepared on metal substrates by spraying the solvent with added elemental In, Cu, and Se particles. Precursor films were instantaneously sintered using a spot welding machine. When the electric power was fixed to 0.6 kVA, elemental In, Cu, or Se peaks were not observed and only peaks of CIS are observed by X-ray diffraction (XRD) on the film sintered for 7/8 s. We can observe XRD peaks indicative of the chalcopyrite-type structure, such as (101), (103) and (211) diffraction peaks. We conclude that the synthesized CIS crystals have chalcopyrite-type structure with high crystallinity

Constraining the cross section of 82Se(n, γ)83Se to validate the β-Oslo method

Science.gov (United States)

Childers, K.; Liddick, S. N.; Crider, B. P.; Dombos, A. C.; Lewis, R.; Spyrou, A.; Couture, A.; Mosby, S.; Prokop, C. J.; Naqvi, F.; Larsen, A. C.; Guttormsen, M.; Campo, L. C.; Renstrom, T.; Siem, S.; Bleuel, D. L.; Perdikakis, G.; Quinn, S.

2017-09-01

Neutron capture cross sections of short-lived nuclei are important for a variety of basic and applied nuclear science problems. However, because of the short half-lives of the nuclei involved and the nonexistence of a neutron target, indirect measurement methods are required. One such method is the β-Oslo method. The nuclear level density and γ strength function of a nucleus are extracted after β-decay and used in a statistical reaction model to constrain the neutron capture cross section. This method has been used previously, but must be validated against a directly measured neutron capture cross section. The neutron capture cross section of 82Se has been measured previously, and 83Se can be accessed by the β-decay of 83As. The β-decay of 83As to 83Se was studied using the SuN detector at the NSCL and the β-Oslo method was utilized to constrain the neutron capture cross section of 82Se, which is compared to the directly measured value.

An approach to global rovibrational analysis based on anharmonic ladder operators: Application to Hydrogen Selenide (H{sub 2}{sup 80}Se)

Energy Technology Data Exchange (ETDEWEB)

Alvarez-Bajo, O. [Dpto. Fisica Aplicada, Facultad de Ciencias Experimentales, Universidad de Huelva, 21071 Huelva (Spain); Carvajal, M., E-mail: miguel.carvajal@dfa.uhu.es [Dpto. Fisica Aplicada, Facultad de Ciencias Experimentales, Universidad de Huelva, 21071 Huelva (Spain); Perez-Bernal, F. [Dpto. Fisica Aplicada, Facultad de Ciencias Experimentales, Universidad de Huelva, 21071 Huelva (Spain)

2012-01-02

Graphical abstract: Schematic diagram of a bent triatomic molecule, depicting the atom numbering, and molecular axis system. An algebraic approach to perform global rovibrational analysis is presented. Highlights: Black-Right-Pointing-Pointer Novel approach for a global rovibrational analysis of polyatomic molecules spectra. Black-Right-Pointing-Pointer One-dimensional vibron model limit combined with rotational degrees of freedom. Black-Right-Pointing-Pointer Phase space Hamiltonian written in terms of anharmonic ladder operators. Black-Right-Pointing-Pointer Algebraic calculations performed with a symmetry-adapted rovibrational basis. Black-Right-Pointing-Pointer Description of the rovibrational spectrum of H{sub 2}Se in the ground electronic state. - Abstract: An algebraic approach to perform global rovibrational analysis of molecular spectra is presented. The approach combines the one-dimensional limit of the vibron model with rotational degrees of freedom. The model is based on the expression of the phase space Hamiltonian in terms of anharmonic ladder operators and the use of a symmetry-adapted basis set given by the linear combination of products of local vibrational and rotational wavefunctions. As an example we model the rovibrational spectra of a bent triatomic molecule, providing a global analysis for vibrational bands up to polyad 12 and J{sub max} = 5 of Hydrogen Selenide (H{sub 2}Se). Satisfactory fits of vibrational and rovibrational energies are obtained. A prediction of 2579 rovibrational energies up to J Less-Than-Or-Slanted-Equal-To 5 and polyad 12 for the 140 lowest vibrational bands is also obtained. A possible extension of the model to reach spectroscopic quality results in larger molecular systems is also given.

La fouille de graphes dans les bases de données réactionnelles au service de la synthèse en chimie organique

OpenAIRE

Pennerath , Frédéric; Napoli , Amedeo

2006-01-01

National audience; La synthèse en chimie organique consiste à concevoir de nouvelles molécules à partir de réactifs et de réactions. Les experts de la synthèse s'appuient sur de très grandes bases de données de réactions qu'ils consultent à travers des procédures d'interrogation standard. Un processus de découverte de nouvelles réactions leur permettrait de mettre au point de nouveaux procédés de synthèse. Cet article présente une modélisation des réactions par des graphes et introduit une mé...

Layer structured bismuth selenides Bi2Se3 and Bi3Se4 for high energy and flexible all-solid-state micro-supercapacitors

Science.gov (United States)

Hao, Chunxue; Wang, Lidan; Wen, Fusheng; Xiang, Jianyong; Li, Lei; Hu, Wentao; Liu, Zhongyuan

2018-02-01

In this work, bismuth selenides (Bi2Se3 and Bi3Se4), both of which have a layered rhombohedral crystal structure, have been found to be useful as electrode materials for supercapacitor applications. In a liquid electrolyte system (6M KOH), Bi2Se3 nanoplates exhibit much better performance as an electrode material than Bi3Se4 nanoparticles do, delivering a higher specific capacitance (272.9 F g-1) than that of Bi3Se4 (193.6 F g-1) at 5 mV s-1. This result may be attributed to the fact that Bi2Se3 nanoplates possess more active electrochemical surfaces for the reversible surface redox reactions owing to their planar quintuple stacked layers (septuple layers for Bi3Se4). To meet the demands of electronic skin, we used a novel flexible annular interdigital structure electrode to support the all-solid-state micro-supercapacitors (AMSCs). The Bi2Se3 AMSC device delivers a much better supercapacitor performance, exhibits a large stack capacitance of 89.5 F cm-3 at 20 mV s-1 (Bi3Se4: 79.1 F cm-3), a high energy density of 17.9 mWh cm-3 and a high power density of 18.9 W cm-3. The bismuth selenides also exhibit good cycle stability, with 95.5% retention after 1000 c for Bi2Se3 (Bi3Se4:90.3%). Clearly, Bi2Se3 nanoplates can be promising electrode materials for flexible annular interdigital AMSCs.

Production of Se-methylselenocysteine in transgenic plants expressing selenocysteine methyltransferase

Directory of Open Access Journals (Sweden)

Harris Hugh

2004-01-01

Full Text Available Abstract Background It has become increasingly evident that dietary Se plays a significant role in reducing the incidence of lung, colorectal and prostate cancer in humans. Different forms of Se vary in their chemopreventative efficacy, with Se-methylselenocysteine being one of the most potent. Interestingly, the Se accumulating plant Astragalus bisulcatus (Two-grooved poison vetch contains up to 0.6% of its shoot dry weight as Se-methylselenocysteine. The ability of this Se accumulator to biosynthesize Se-methylselenocysteine provides a critical metabolic shunt that prevents selenocysteine and selenomethionine from entering the protein biosynthetic machinery. Such a metabolic shunt has been proposed to be vital for Se tolerance in A. bisulcatus. Utilization of this mechanism in other plants may provide a possible avenue for the genetic engineering of Se tolerance in plants ideally suited for the phytoremediation of Se contaminated land. Here, we describe the overexpression of a selenocysteine methyltransferase from A. bisulcatus to engineer Se-methylselenocysteine metabolism in the Se non-accumulator Arabidopsis thaliana (Thale cress. Results By over producing the A. bisulcatus enzyme selenocysteine methyltransferase in A. thaliana, we have introduced a novel biosynthetic ability that allows the non-accumulator to accumulate Se-methylselenocysteine and γ-glutamylmethylselenocysteine in shoots. The biosynthesis of Se-methylselenocysteine in A. thaliana also confers significantly increased selenite tolerance and foliar Se accumulation. Conclusion These results demonstrate the feasibility of developing transgenic plant-based production of Se-methylselenocysteine, as well as bioengineering selenite resistance in plants. Selenite resistance is the first step in engineering plants that are resistant to selenate, the predominant form of Se in the environment.

Optical band gap study of a-Se and Se-Sb thin films

International Nuclear Information System (INIS)

Kaur, Ramandeep; Singh, Palwinder; Thakur, Anup

2016-01-01

Amorphous selenium (a-Se) and a-Se_9_5Sb_5 alloy were prepared using melt quenching technique. X-ray diffraction (XRD) pattern confirmed the amorphous nature of the prepared samples. Composition of the prepared samples has been determined using Energy dispersive X-ray fluorescence (EDXRF) technique. Differential thermal analysis (DTA) confirmed the glassy nature of the prepared samples. Thin films of the prepared samples were deposited on glass substrate using thermal evaporation method. Amorphous nature of the deposited films was confirmed using XRD. Optical properties of these films were obtained from the UV-VIS transmission spectra, at normal incidence, over 200-1100 nm spectral range. The optical absorption edge was described by using the model given by the Tauc. Optical band gap of the deposited films was calculated using Tauc plot. Optical characterization showed that average transmission and optical band gap decreased with the addition of antinomy.

Efficiency limitations of polycrystalline thin film solar cells: case of Cu(In,Ga)Se2

International Nuclear Information System (INIS)

Werner, Juergen H.; Mattheis, Julian; Rau, Uwe

2005-01-01

Small-area Cu(In,Ga)Se 2 thin film solar cells have reached more than 19% efficiencies. Compared to other polycrystalline materials this efficiency value is remarkable. Nevertheless, the 19% for Cu(In,Ga)Se 2 range more than 6% (absolute) below the world's best single-crystalline Si cells and almost 14% below the upper theoretical limit of 33% for an ideal black body cell with infinitely large mobility and radiative recombination only. About 4% out of the 14% are of optical nature, additional 3% stem from the limited mobility/diffusion length and from band gap fluctuations with a standard deviation no. sigmano. g no. approxno. 50 meV due to spatial variations of composition and stoichiometry of the quaternary compound Cu(In,Ga)Se 2 . Thus, about 26% efficiency would be possible if there were only these band gap fluctuations. Additional, voltage-dependent electrostatic potential fluctuations push down the efficiency further to 19%: The polycrystalline Cu(In,Ga)Se 2 which is unavoidably structurally inhomogeneous due to dislocations, grain boundaries, point defects, etc. is also electrostatically inhomogeneous because of charged defects. Electrostatic potential fluctuations at the valence and conduction band edge may be not only responsible for a high saturation current density but also for the ideality factor in the current/voltage curve. The band gap and electrostatic potential fluctuations make the effective band gap which controls the intrinsic carrier density smaller than the average optical gap. The (zero bias) electrostatic potential fluctuations are here derived from the ideality factors of the current/voltage curve. The ideality factor reflects the voltage-induced electrostatic homogenization of the sample. For the world's best Cu(In,Ga)Se 2 cells with an ideality factor of n id =1.5, we estimate zero bias electrostatic potential fluctuations with a standard deviation no. sigmano. elec no. approxno. 140 meV

Green synthesis of ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) using a new, rapid and room temperature photochemical approach

International Nuclear Information System (INIS)

Molaei, M.; Bahador, A.R.; Karimipour, M.

2015-01-01

In this work, ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) were synthesized using a one-pot, rapid and room temperature photochemical method. UV illumination provided the required energy for the chemical reactions. Synthesized NCs were characterized using X-ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM), UV–vis and photoluminescence (PL) spectroscopy. XRD pattern indicated cubic zinc blende structure for ZnSe NCs and the TEM image indicated round-shaped particles, most of which had a diameter of about 3 nm. Band gap of ZnSe NCs was obtained as about 3.6 eV, which was decreased by increasing the illumination time. Synthesized NCs indicated intensive and narrow emission in the UV-blue area (370 nm) related to the excitonic recombination and a broad band emission with a peak located at about 490 nm originated from the DAP (donor–acceptor pairs) recombination. ZnS shell was grown on ZnSe cores using a reaction based on the photo-sensitivity of Na 2 S 2 O 3 . For ZnSe@ZnS core–shell NCs, XRD diffraction peaks shifted to higher angles. TEM image indicated a shell around cores and most of the ZnSe@ZnS NCs have a diameter of about 5 nm. After the ZnS growth, ZnSe excitonic emission shifted to the longer wavelength and PL intensity was increased considerably. PL QY was obtained about 11% and 17% for ZnSe and ZnSe@ZnS core–shell QDs respectively. - Highlights: • A green photochemical approach was reported for synthesis of ZnSe NCs. • ZnS shell was grown around ZnSe using a new method. • Synthesis method was rapid, simple and at room temperature. • ZnSe NCs indicated a narrow UV-blue and a broad DAP emissions. • PL intensity was increased considerably by ZnS shell growth

de drogas que se consumen en su medio

Directory of Open Access Journals (Sweden)

José F. Enríquez Bielma

2006-01-01

Full Text Available Las adicciones son un problema de salud pública. Se estima que en México 3.5 millones de personas entre 12 a los 65 años han consumido algún tipo de drogas. A pesar de los avances en los estudios, se ha dejado de lado el carácter cultural que tiene la adicción. Con este estudio, se deseba conocer qué saben los estudiantes de segundo de secundaria sobre cuáles son las drogas que se consumen en su medio. Se llevó a cabo un estudio observacional con un muestreo aleatorio, con múltiples etapas y proporcional al tamaño en escuelas públicas y privadas. En total se estudiaron 42 escuelas del municipio de León, Gto., México de las cuales el 76.2% lo conformaron las escuelas públicas y el resto las escuelas privadas. Refirieron que conocen que se consumen, en su medio, 11 tipos de drogas. El 88% mencionó a la cocaína en primer lugar, en segundo lugar con un 85% la marihuana, siguiendo las tachas en un 62% y el pegamento en un 49%. En cuanto a los nombres que los estudiantes le dan a las drogas, estos van desde 23 hasta los 4 nombres, siendo la marihuana a la que se le da el mayor número de nombres, seguidos de la cocaína y el éxtasis.

Future strategy of SE

International Nuclear Information System (INIS)

Arcelli, M.

2006-01-01

In this presentation author (General Director of Slovenske elektrarne, a. s.) presents structure and investment plans of SE. The feasibility study of construction of the blocks 3 and 4 of the Mochovce NPP is presented

Magnetic excitation and local magnetic susceptibility of the excitonic insulator Ta2NiSe5 investigated by 77Se NMR

Science.gov (United States)

Li, Shang; Kawai, Shunsuke; Kobayashi, Yoshiaki; Itoh, Masayuki

2018-04-01

77Se NMR measurements were made on polycrystalline and single-crystalline samples to elucidate local magnetic susceptibility and magnetic excitation of Ta2NiSe5 , which is proposed to undergo an exciton condensation accompanied by a structural transition at Tc=328 K . We determine the 77Se Knight shift tensors for the three Se sites and analyze their anisotropy based on the site symmetry. The temperature dependence of the Knight shift is discussed on the basis of spin and orbital susceptibilities calculated for two-chain and two-dimensional three-band models. The large fraction of the Se 4 p orbital polarization due to the mixing between Ni 3 d and Se 4 p orbitals is estimated from the analysis of the transferred hyperfine coupling constant. Also the nuclear spin-lattice relaxation rate 1 /T1 is found not to show a coherent peak just below Tc and to obey the thermally activated temperature dependence with a spin gap energy of 1770 ±40 K . This behavior of 1 /T1 monitors the exciton condensation as proposed by the theoretical study of 1 /T1 based on the three-chain Hubbard model for the excitonic insulator.

Porous Se@SiO2 nanospheres treated paraquat-induced acute lung injury by resisting oxidative stress

Directory of Open Access Journals (Sweden)

Zhu Y

2017-09-01

Full Text Available Yong Zhu,1,* Guoying Deng,2,* Anqi Ji,2 Jiayi Yao,1 Xiaoxiao Meng,1 Jinfeng Wang,1 Qian Wang,2 Qiugen Wang,2 Ruilan Wang1 1Department of Critical Care Medicine, Shanghai General Hospital, Shanghai Jiaotong University, School of Medicine, 2Trauma Center, Shanghai General Hospital, Shanghai Jiaotong University, School of Medicine, Shanghai, China *These authors contributed equally to this work Abstract: Acute paraquat (PQ poisoning is one of the most common forms of pesticide poisoning. Oxidative stress and inflammation are thought to be important mechanisms in PQ-induced acute lung injury (ALI. Selenium (Se can scavenge intracellular free radicals directly or indirectly. In this study, we investigated whether porous Se@SiO2 nanospheres could alleviate oxidative stress and inflammation in PQ-induced ALI. Male Sprague Dawley rats and RLE-6TN cells were used in this study. Rats were categorized into 3 groups: control (n=6, PQ (n=18, and PQ + Se@SiO2 (n=18. The PQ and PQ + Se@SiO2 groups were randomly and evenly divided into 3 sub-groups according to different time points (24, 48 and 72 h after PQ treatment. Porous Se@SiO2 nanospheres 1 mg/kg (in the PQ + Se@SiO2 group were administered via intraperitoneal injection every 24 h. Expression levels of reduced glutathione, malondialdehyde, superoxide dismutase, reactive oxygen species (ROS, nuclear factor-κB (NF-κB, phosphorylated NF-κB (p-NF-κB, tumor necrosis factor-α and interleukin-1β were detected, and a histological analysis of rat lung tissues was performed. The results showed that the levels of ROS, malondialdehyde, NF-κB, p-NF-κB, tumor necrosis factor-α and interleukin-1β were markedly increased after PQ treatment. Glutathione and superoxide dismutase levels were reduced. However, treatment with porous Se@SiO2 nanospheres markedly alleviated PQ-induced oxidative stress and inflammation. Additionally, the results from histological examinations and wet-to-dry weight ratios of rat lung

Implications of orbital hybridization on the electronic properties of doped quantum dots: the case of Cu:CdSe

Energy Technology Data Exchange (ETDEWEB)

Wright, Joshua T.; Forsythe, Kyle; Hutchins, Jamie; Meulenberg, Robert W.

2016-04-13

This paper investigates how chemical dopants affect the electronic properties of CdSe quantum dots (QDs) and why a model that incorporates the concepts of orbital hybridization must be used to understand these properties. Extended X-ray absorption fine structure spectroscopy measurements show that copper dopants in CdSe QDs occur primarily through a statistical doping mechanism. Ultraviolet photoemission spectroscopy (UPS) experiments provide a detailed insight on the valence band (VB) structure of doped and undoped QDs. Using UPS measurements, we are able to observe photoemission from the Cu d-levels above VB maximum of the QDs which allows a complete picture of the energy band landscape of these materials. This information provides insights into many of the physical properties of doped QDs, including the highly debated near-infrared photoluminescence in Cu doped CdSe QDs. We show that all our results point to a common theme of orbital hybridization in Cu doped CdSe QDs which leads to optically and electronically active states below the conduction band minimum. Our model is supported from current–voltage measurements of doped and undoped materials, which exhibit Schottky to Ohmic behavior with Cu doping, suggestive of a tuning of the lowest energy states near the Fermi level.

Thermoelectric and mechanical properties of spark plasma sintered Cu3SbSe3 and Cu3SbSe4: Promising thermoelectric materials

Science.gov (United States)

Tyagi, Kriti; Gahtori, Bhasker; Bathula, Sivaiah; Toutam, Vijaykumar; Sharma, Sakshi; Singh, Niraj Kumar; Dhar, Ajay

2014-12-01

We report the synthesis of thermoelectric compounds, Cu3SbSe3 and Cu3SbSe4, employing the conventional fusion method followed by spark plasma sintering. Their thermoelectric properties indicated that despite its higher thermal conductivity, Cu3SbSe4 exhibited a much larger value of thermoelectric figure-of-merit as compared to Cu3SbSe3, which is primarily due to its higher electrical conductivity. The thermoelectric compatibility factor of Cu3SbSe4 was found to be ˜1.2 as compared to 0.2 V-1 for Cu3SbSe3 at 550 K. The results of the mechanical properties of these two compounds indicated that their microhardness and fracture toughness values were far superior to the other competing state-of-the-art thermoelectric materials.

Determination of total, and bound Se in sera by INAA

International Nuclear Information System (INIS)

Spate, V.L.; Mason, M.M.; Reams, C.L.; Baskett, C.K.; Morris, J.S.; Mills, D.S.

1994-01-01

The comparison between the total selenium in serum ('total Se') with that which is apparently bound to high molecular weight (> 12.000 D) species, presumably proteins ('bound Se') was reported. Nine hundred seventy seven (977) serum samples arising out of a population-based epidemiological study were prepared in duplicate for the determination of 'total Se' by pipeting directly into irradiation vials; and separate duplicate aliquots were dialyzed against DI water for the determination of 'bound Se'. All samples were analyzed by neutron activation analysis via 77m Se (17.4s) A small dialyzable Se component (∼ 6%) ('free Se'), defined as the difference between the 'total Se' minus the 'bound Se', was identified. (author) 2 refs.; 3 figs.; 5 tabs

Structural and optical properties of CdSe nanosheets

Science.gov (United States)

Solanki, Rekha Garg; Rajaram, P.; Arora, Aman

2018-04-01

Nanosheets of CdSe have been synthesized using a solvothermal route using citric acid as an additive. It is found that the citric acid effectively controls the structural and optical properties of CdSe nanostructures. XRD studies confirm the formation of hexagonal wurtzite phase of CdSe. The FESEM micrographs show that the obtained CdSe nanocrystals are in the form of very thin sheets (nanosheets). Optical absorption studies as well as Photoluminescence spectra show that the optical gap is around 1.76 eV which is close to the reported bulk value of 1.74 eV. The prepared CdSe nanosheets because of large surface area may be useful for catalytic activities in medicine, biotechnology and environmental chemistry and in biomedical imaging for in vitro detection of a breast cancer cells.

Tapping a new energy source

International Nuclear Information System (INIS)

Thomas, W.

1999-01-01

The Sable Offshore Energy Project is one of Canada's largest construction projects which is bringing a new industry to Nova Scotia. A five-party consortium comprised of Mobil Oil Canada, Shell Canada, Imperial Oil, Nova Scotia Resources and Mosbacher, has formed an enterprise called Sable Offshore Energy Inc. The consortium plans to bring natural gas to markets in Canada and the United States before the end of 1999. The Santa Fe Galaxy II is one of the world's most modern marine all-weather drilling rigs that will soon begin the drilling of wells. Once in production, the project will produce half a billion cubic feet of natural gas daily from three production platforms that will tap three separate undersea natural gas fields. The gas will then be transported 200 km to shore near Goldboro, Nova Scotia, through an undersea pipeline. There, it will be treated to remove any remaining water and to separate liquid natural gas from the gas proper. The natural gas liquids will then be carried by an onshore pipeline to a new facility at Point Tupper where they will be processed into propane, butane and condensate. There will be enough gas to meet the potential demand in Nova Scotia and New Brunswick. Large urban centres such as Halifax and Saint John will be served by secondary lines that branch off the main pipeline, but developing smaller markets will take time because the necessary infrastructure does not yet exist. The project has already created thousands of jobs in the province. 5 figs

Biomimetic synthesis of selenium nanospheres by bacterial strain JS-11 and its role as a biosensor for nanotoxicity assessment: a novel se-bioassay.

Science.gov (United States)

Dwivedi, Sourabh; Alkhedhairy, Abdulaziz A; Ahamed, Maqusood; Musarrat, Javed

2013-01-01

Selenium nanoparticles (Se-NPs) were synthesized by green technology using the bacterial isolate Pseudomonas aeruginosa strain JS-11. The bacteria exhibited significant tolerance to selenite (SeO3(2-)) up to 100 mM concentration with an EC50 value of 140 mM. The spent medium (culture supernatant) contains the potential of reducing soluble and colorless SeO3(2-) to insoluble red elemental selenium (Se(0)) at 37°C. Characterization of red Se° product by use of UV-Vis spectroscopy, X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM) with energy dispersive X-ray spectrum (EDX) analysis revealed the presence of stable, predominantly monodispersed and spherical selenium nanoparticles (Se-NPs) of an average size of 21 nm. Most likely, the metabolite phenazine-1-carboxylic acid (PCA) released by strain JS-11 in culture supernatant along with the known redox agents like NADH and NADH dependent reductases are responsible for biomimetic reduction of SeO3(2-) to Se° nanospheres. Based on the bioreduction of a colorless solution of SeO3(2-) to elemental red Se(0), a high throughput colorimetric bioassay (Se-Assay) was developed for parallel detection and quantification of nanoparticles (NPs) cytotoxicity in a 96 well format. Thus, it has been concluded that the reducing power of the culture supernatant of strain JS-11 could be effectively exploited for developing a simple and environmental friendly method of Se-NPs synthesis. The results elucidated that the red colored Se° nanospheres may serve as a biosensor for nanotoxicity assessment, contemplating the inhibition of SeO3(2-) bioreduction process in NPs treated bacterial cell culture supernatant, as a toxicity end point.

seNorge2 daily precipitation, an observational gridded dataset over Norway from 1957 to the present day

Science.gov (United States)

Lussana, Cristian; Saloranta, Tuomo; Skaugen, Thomas; Magnusson, Jan; Tveito, Ole Einar; Andersen, Jess

2018-02-01

The conventional climate gridded datasets based on observations only are widely used in atmospheric sciences; our focus in this paper is on climate and hydrology. On the Norwegian mainland, seNorge2 provides high-resolution fields of daily total precipitation for applications requiring long-term datasets at regional or national level, where the challenge is to simulate small-scale processes often taking place in complex terrain. The dataset constitutes a valuable meteorological input for snow and hydrological simulations; it is updated daily and presented on a high-resolution grid (1 km of grid spacing). The climate archive goes back to 1957. The spatial interpolation scheme builds upon classical methods, such as optimal interpolation and successive-correction schemes. An original approach based on (spatial) scale-separation concepts has been implemented which uses geographical coordinates and elevation as complementary information in the interpolation. seNorge2 daily precipitation fields represent local precipitation features at spatial scales of a few kilometers, depending on the station network density. In the surroundings of a station or in dense station areas, the predictions are quite accurate even for intense precipitation. For most of the grid points, the performances are comparable to or better than a state-of-the-art pan-European dataset (E-OBS), because of the higher effective resolution of seNorge2. However, in very data-sparse areas, such as in the mountainous region of southern Norway, seNorge2 underestimates precipitation because it does not make use of enough geographical information to compensate for the lack of observations. The evaluation of seNorge2 as the meteorological forcing for the seNorge snow model and the DDD (Distance Distribution Dynamics) rainfall-runoff model shows that both models have been able to make profitable use of seNorge2, partly because of the automatic calibration procedure they incorporate for precipitation. The seNorge2

PySE: Software for extracting sources from radio images

Science.gov (United States)

Carbone, D.; Garsden, H.; Spreeuw, H.; Swinbank, J. D.; van der Horst, A. J.; Rowlinson, A.; Broderick, J. W.; Rol, E.; Law, C.; Molenaar, G.; Wijers, R. A. M. J.

2018-04-01

PySE is a Python software package for finding and measuring sources in radio telescope images. The software was designed to detect sources in the LOFAR telescope images, but can be used with images from other radio telescopes as well. We introduce the LOFAR Telescope, the context within which PySE was developed, the design of PySE, and describe how it is used. Detailed experiments on the validation and testing of PySE are then presented, along with results of performance testing. We discuss some of the current issues with the algorithms implemented in PySE and their interaction with LOFAR images, concluding with the current status of PySE and its future development.

Synthesis and biodistribution of 75Se-dinonyl-diselenide

International Nuclear Information System (INIS)

Liu, Y.F.; Qian, H.Q.; Zhang, Q.X.; Wang, X.Y.; Sun, J.G.; Li, B.Z.; Zhang, W.J.

1985-01-01

Selenium-75-labelled dinonyl-diselenide, C 9 H 19 75 SeSeC 9 H 19 , was synthesized and identified. It was injected into white rats in order to observe the selenium distribution in the tissues using inorganic 75 SeO 2 as the control agent. The sequence order of the 75 Se-dinonyl-diselenide uptake by tissues was: pancreas, muscles, stomach, liver, kidneys, spleen, blood, lungs, heart, brain, eyes. A very high accumulation of 75 Se-dinonyl-diselenide in the pancreas was observed, similar to that of the pancreatic imaging agent 75 Se-methionine. Furthermore, the enzymatic activity of glutathione peroxidase in the case of organic diselenide injection was higher than that measured for selenite. Selenium of dinonyl-diselenide was more effective and retainable in the process of converting itself to selenium-containing enzyme via the metabolic reactions. It may be advisable to replace inorganic sodium selenite by organic selenium compounds. Sodium selenite has been widely used in the prevention of the Keshan disease in China. (author)

PbSe nanocubes obtained by high-energy milling

Energy Technology Data Exchange (ETDEWEB)

Rojas-Chavez, H., E-mail: hrojasc@ipn.mx [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada - IPN (Mexico); Reyes-Carmona, F. [Facultad de Quimica - UNAM (Mexico); Achimovicova, M. [Slovak Academy of Sciences, Institute of Geotechnics (Slovakia); Daneu, N. [Jozef Stefan Institute, Department for Nanostructured Materials (Slovenia); Jaramillo-Vigueras, D. [Centro de Investigacion e Innovacion Tecnologica - IPN (Mexico)

2012-06-15

In this study, PbSe nanocubes were obtained by high-energy milling, and their optical properties were investigated by measuring the UV-VIS-IR spectra in the range of 200-2,000 nm. The optical absorption of all samples showed a strong UV emission band at 1.45 eV. Previously, to obtain only PbSe nanocubes, an intermediate phase was identified, PbSeO{sub 3}. Although both PbSeO{sub 3} and PbSe were traced through this study, a major effort is devoted to characterize the latter. To trace how chemical transitions evolve from precursors to PbSe, X-ray diffraction and Rietveld refinement were carried out. Therefore, the following parameters were evaluated as a function of milling time: phase percentages, area-to-volume ratio, average crystallite dimensions, specific surface area, and morphology changes. To corroborate previous findings, nitrogen adsorption and transmission electron microscopy techniques were used. All the set experimental results unambiguously confirm that crystallites show a cubic morphology, with its average crystallite size distribution being around 24 nm.

Selective Cytotoxic Activity of Se-Methyl-Seleno-L-Cysteine- and Se-Polysaccharide-Containing Extracts from Shiitake Medicinal Mushroom, Lentinus edodes (Agaricomycetes).

Science.gov (United States)

Klimaszewska, Marzenna; Górska, Sandra; Dawidowski, Maciej; Podsadni, Piotr; Szczepanska, Agnieszka; Orzechowska, Emilia; Kurpios-Piec, Dagmara; Grosicka-Maciag, Emilia; Rahden-Staroń, Iwonna; Turło, Jadwiga

2017-01-01

Numerous formulations derived from the shiitake medicinal mushroom, Lentinus edodes, demonstrate anticancer activities. We hypothesized that isolates from selenium (Se)-enriched mycelia of L. edodes would possess stronger cancer-preventive properties than current preparations. The aim of this study was to investigate whether the presence of Se-methyl-seleno-L-cysteine in mycelial extracts of L. edodes affects their cytotoxic activity (makes them stronger) or whether they are as effective as Se-containing polysaccharides. Extracts were prepared from Se-containing mycelia under various conditions and assayed for cytotoxic activity in cancer (PC3 and HeLa) and normal (HMEC-1) cell lines. The chemical composition of the extracts was examined; specifically, the amounts of potentially cytotoxic Se compounds (methylselenocysteine, selenomethionine, and Se-containing polysaccharides) were measured. The relationship between extract composition and biological activity was characterized. Mycelial cultures were cultivated in a 10-L bioreactor in medium enriched with sodium selenite. Mycelial extracts were prepared either at 100°C or at 4°C in acidic solution. Total Se content was determined using the atomic absorption spectrometry method, and methylselenocysteine and selenomethionine contents were measured using reverse-phase high-performance liquid chromatography. Protein, carbohydrate, and polyphenolic contents were determined with spectrophotometric methods, and Se-containing polysaccharides were measured with the use of precipitation. Anticancer activity of mycelial extracts was examined using the MTT cell viability assay. Extracts containing Se-methyl-seleno-L-cysteine or Se-polysaccharides prepared at 4°C and 100°C, respectively, display moderate, time-dependent, specific cytotoxic activity in HeLa and PC3 cell lines. The effect in HeLa cells is more pronounced in the extract prepared at 4°C than at 100°C. The effect is almost equal for the PC3 cell line. However

Development of conductive nanotemplates on ZnSe

International Nuclear Information System (INIS)

Monaico, Eduard; Tiginyanu, Ion; Colibaba, Gleb; Nedeoglo, D.D.; Cojocaru, Ala; Foell, Helmut

2011-01-01

We demonstrate the possibility to fabricate arrays of pores oriented perpendicular and parallel to the top surface of the ZnSe nanotemplate. The control of material conductivity allows one to produce porous ZnSe samples with the mean pore diameter and characteristic skeleton wall thickness from several hundreds of nanometers to about 15 nm. In addition, electrochemical treatment of ZnSe single crystals using photoresist masks allows one to prepare buried porous structures with pores directed parallel to the top template surface, which is especially important for photonic applications.

Thermoelectric Performance of Na-Doped GeSe

NARCIS (Netherlands)

Shaabani, Laaya; Aminorroaya-Yamini, Sima; Byrnes, Jacob; Akbar Nezhad, Ali; Blake, Graeme R

2017-01-01

Recently, hole-doped GeSe materials have been predicted to exhibit extraordinary thermoelectric performance owing largely to extremely low thermal conductivity. However, experimental research on the thermoelectric properties of GeSe has received less attention. Here, we have synthesized

Formation and reconstruction of Se nanoislands at the surface of thin epitaxial ZnSe layers grown on GaAs substrates

Energy Technology Data Exchange (ETDEWEB)

Kozlovskiy, V. I.; Krivobok, V. S., E-mail: krivobok@lebedev.ru [Russian Academy of Sciences, Lebedev Physical Institute (Russian Federation); Kuznetsov, P. I.; Nikolaev, S. N.; Onistchenko, E. E.; Pruchkina, A. A.; Temiryazev, A. G. [Russian Academy of Sciences, Kotel’nikov Institute of Radio-Engineering and Electronics (Russian Federation)

2016-05-15

Strained epitaxial ZnSe layers are grown on GaAs substrates by the method of vapor-phase epitaxy from metal-organic compounds. It is found that Se nanoislands with a density of 10{sup 8} to 10{sup 9} cm{sup –2} are formed at the surface of such layers. It is established that an increase in the size of Se islands and a decrease in their density take place after completion of growth. Annealing in a H{sub 2} atmosphere at a temperature higher than 260°C leads to the disappearance of Se islands and to a decrease in the surface roughness. It is shown that annealing does not lead to deterioration of the structural perfection of the epitaxial ZnSe films; rather, annealing gives rise to a decrease in the intensity of impurity–defect luminescence and to an increase in the intensity of intrinsic radiation near the bottom of the exciton band.

Chemical synthesis of Cu2Se nanoparticles at room temperature

International Nuclear Information System (INIS)

Rong, Fengxia; Bai, Yan; Chen, Tianfeng; Zheng, Wenjie

2012-01-01

Graphical abstract: The Cu 2 Se nanoparticles were synthesized by a simple and rapid method at room temperature. The TEM and SEM images show that the Cu 2 Se nanoparticles were spherical. Highlights: ► Cu 2 Se nanoparticles were synthesized by the reaction of nanoSe 0 sol with Cu + ions. ► The Cu 2 Se nanoparticles were spherical with cubic structure and well crystallized. ► Optical and electrochemical properties of Cu 2 Se nanoparticles were observed. ► The formation mechanism of Cu 2 Se nanoparticles was proposed. -- Abstract: A simple and rapid method has been developed to synthesize cuprous selenide (Cu 2 Se) nanoparticles by the reaction of selenium nanoparticles sol with copper sulfate solution containing ascorbic acid at room temperature. Cu 2 Se nanoparticles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy dispersive X-ray analysis (EDX). The results indicated that Cu 2 Se nanoparticles were cubic crystal structure and spherical with the diameter about 75 nm. The ultraviolet–visible absorption spectrum (UV–vis) and cyclic voltammetry of Cu 2 Se nanoparticles were also investigated. The optical band gap energy of Cu 2 Se nanoparticles was 1.94 eV. On the basis of a series of experiments and characterizations, the formation mechanism of Cu 2 Se nanoparticles was discussed.

Electronic structure and superconductivity of FeSe-related superconductors.

Science.gov (United States)

Liu, Xu; Zhao, Lin; He, Shaolong; He, Junfeng; Liu, Defa; Mou, Daixiang; Shen, Bing; Hu, Yong; Huang, Jianwei; Zhou, X J

2015-05-13

FeSe superconductors and their related systems have attracted much attention in the study of iron-based superconductors owing to their simple crystal structure and peculiar electronic and physical properties. The bulk FeSe superconductor has a superconducting transition temperature (Tc) of ~8 K and it can be dramatically enhanced to 37 K at high pressure. On the other hand, its cousin system, FeTe, possesses a unique antiferromagnetic ground state but is non-superconducting. Substitution of Se with Te in the FeSe superconductor results in an enhancement of Tc up to 14.5 K and superconductivity can persist over a large composition range in the Fe(Se,Te) system. Intercalation of the FeSe superconductor leads to the discovery of the AxFe2-ySe2 (A = K, Cs and Tl) system that exhibits a Tc higher than 30 K and a unique electronic structure of the superconducting phase. A recent report of possible high temperature superconductivity in single-layer FeSe/SrTiO3 films with a Tc above 65 K has generated much excitement in the community. This pioneering work opens a door for interface superconductivity to explore for high Tc superconductors. The distinct electronic structure and superconducting gap, layer-dependent behavior and insulator-superconductor transition of the FeSe/SrTiO3 films provide critical information in understanding the superconductivity mechanism of iron-based superconductors. In this paper, we present a brief review of the investigation of the electronic structure and superconductivity of the FeSe superconductor and related systems, with a particular focus on the FeSe films.

Exploration work function and optical properties of monolayer SnSe allotropes

Science.gov (United States)

Cui, Zhen; Wang, Xia; Ding, Yingchun; Li, Meiqin

2018-02-01

The work function and optical properties are investigated with density functional theory for three monolayer SnSe allotropes. The calculated results indicate that the α-SnSe, δ-SnSe, ε-SnSe are semiconductor with the band gaps of 0.90, 1.25, and 1.50 eV, respectively. Meanwhile, the work function of δ-SnSe is lower than α-SnSe and ε-SnSe, which indicates that the δ-SnSe can be prepared of photoemission and field emission nanodevices. More importantly, the α-SnSe, δ-SnSe, ε-SnSe with the large static dielectric constants are 4.22, 5.48, and 3.61, which demonstrate that the three monolayer SnSe allotropes can be fabricated the capacitor. In addition, the static refractive index of δ-SnSe is larger than α-SnSe and ε-SnSe. The different optical properties with three monolayer SnSe allotropes reveal that the allotropes can regulate the properties of the materials. Moreover, our researched results show that the three monolayer SnSe allotropes are sufficient for fabrication of optoelectronic nanodevices.

Green synthesis of ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) using a new, rapid and room temperature photochemical approach

Energy Technology Data Exchange (ETDEWEB)

Molaei, M., E-mail: m.molaei@vru.ac.ir; Bahador, A.R.; Karimipour, M.

2015-10-15

In this work, ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) were synthesized using a one-pot, rapid and room temperature photochemical method. UV illumination provided the required energy for the chemical reactions. Synthesized NCs were characterized using X-ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM), UV–vis and photoluminescence (PL) spectroscopy. XRD pattern indicated cubic zinc blende structure for ZnSe NCs and the TEM image indicated round-shaped particles, most of which had a diameter of about 3 nm. Band gap of ZnSe NCs was obtained as about 3.6 eV, which was decreased by increasing the illumination time. Synthesized NCs indicated intensive and narrow emission in the UV-blue area (370 nm) related to the excitonic recombination and a broad band emission with a peak located at about 490 nm originated from the DAP (donor–acceptor pairs) recombination. ZnS shell was grown on ZnSe cores using a reaction based on the photo-sensitivity of Na{sub 2}S{sub 2}O{sub 3}. For ZnSe@ZnS core–shell NCs, XRD diffraction peaks shifted to higher angles. TEM image indicated a shell around cores and most of the ZnSe@ZnS NCs have a diameter of about 5 nm. After the ZnS growth, ZnSe excitonic emission shifted to the longer wavelength and PL intensity was increased considerably. PL QY was obtained about 11% and 17% for ZnSe and ZnSe@ZnS core–shell QDs respectively. - Highlights: • A green photochemical approach was reported for synthesis of ZnSe NCs. • ZnS shell was grown around ZnSe using a new method. • Synthesis method was rapid, simple and at room temperature. • ZnSe NCs indicated a narrow UV-blue and a broad DAP emissions. • PL intensity was increased considerably by ZnS shell growth.

Shell Thickness Dependence of Interparticle Energy Transfer in Core-Shell ZnSe/ZnSe Quantum Dots Doping with Europium

Science.gov (United States)

Liu, Ni; Li, Shuxin; Wang, Caifeng; Li, Jie

2018-04-01

Low-toxic core-shell ZnSe:Eu/ZnS quantum dots (QDs) were prepared through two steps in water solution: nucleation doping and epitaxial shell grown. The structural and morphological characteristics of ZnSe/ZnS:Eu QDs with different shell thickness were explored by transmission electron microscopy (TEM) and X-ray diffraction (XRD) results. The characteristic photoluminescence (PL) intensity of Eu ions was enhanced whereas that of band-edge luminescence and defect-related luminescence of ZnSe QDs was decreased with increasing shell thickness. The transformation of PL intensity revealed an efficient energy transfer process between ZnSe and Eu. The PL intensity ratio of Eu ions ( I 613) to ZnSe QDs ( I B ) under different shell thickness was systemically analyzed by PL spectra and time-resolved PL spectra. The obtained results were in agreement with the theory analysis results by the kinetic theory of energy transfer, revealing that energy was transmitted in the form of dipole-electric dipole interaction. This particular method of adjusting luminous via changing the shell thickness can provide valuable insights towards the fundamental understanding and application of QDs in the field of optoelectronics.

Novel mechanical behaviors of wurtzite CdSe nanowires

Energy Technology Data Exchange (ETDEWEB)

Fu, Bing [Shanghai Normal University, Department of Physics (China); Chen, Li [MCPHS University, School of Arts and Sciences (United States); Xie, Yiqun; Feng, Jie; Ye, Xiang, E-mail: yexiang@shnu.edu.cn [Shanghai Normal University, Department of Physics (China)

2015-09-15

As an important semiconducting nanomaterial, CdSe nanowires have attracted much attention. Although many studies have been conducted in the electronic and optical properties of CdSe NWs, the mechanical properties of Wurtzite (WZ) CdSe nanowires remain unclear. Using molecular dynamics simulations, we have studied the tensile mechanical properties and behaviors of [0001]-oriented Wurtzite CdSe nanowires. By monitoring the stretching processes of CdSe nanowires, three distinct structures are found: the WZ wire, a body-centered tetragonal structure with four-atom rings (denoted as BCT-4), and a structure that consists of ten-atom rings with two four-atom rings (denoted as TAR-4) which is observed for the first time. Not only the elastic tensile characteristics are highly reversible under unloading, but a reverse transition between TAR-4 and BCT-4 is also observed. The stretching processes also have a strong dependence on temperature. A tubular structure similar to carbon nanotubes is observed at 150 K, a single-atom chain is formed at 300, 350 and 450 K, and a double-atom chain is found at 600 K. Our findings on tensile mechanical properties of WZ CdSe nanowires does not only provide inspiration to future study on other properties of CdSe nanomaterials but also help design and build efficient nanoscale devices.

Los jóvenes se incomunican

Directory of Open Access Journals (Sweden)

Margarita Ferro

2015-01-01

Full Text Available Hace años los jóvenes se comunicaban y relacionaban con sus amigos del barrio o de la escuela por lo que desde pequeños desarrollaban una comunicación interpersonal fluida. Hoy los video-juegos han sustituido la amistad y se han transformado en elementos de la comunicación. La autora analiza el mundo del nintendo y su influencia en las personas

SeRLoc: Robust Localization for Wireless Sensor Networks

National Research Council Canada - National Science Library

Lazos, Loukas; Poovendran, Radha

2005-01-01

.... We show that SeRLoc is robust against known attacks on WSNs such as the wormhole attack, the Sybil attack, and compromise of network entities and analytically compute the probability of success for each attack. We also compare the performance of SeRLoc with state-of-the-art range-independent localization schemes and show that SeRLoc has better performance.

Nematicity, magnetism and superconductivity in FeSe.

Science.gov (United States)

Böhmer, Anna E; Kreisel, Andreas

2018-01-17

Iron-based superconductors are well known for their complex interplay between structure, magnetism and superconductivity. FeSe offers a particularly fascinating example. This material has been intensely discussed because of its extended nematic phase, whose relationship with magnetism is not obvious. Superconductivity in FeSe is highly tunable, with the superconducting transition temperature, T c , ranging from 8 K in bulk single crystals at ambient pressure to almost 40 K under pressure or in intercalated systems, and to even higher temperatures in thin films. In this topical review, we present an overview of nematicity, magnetism and superconductivity, and discuss the interplay of these phases in FeSe. We focus on bulk FeSe and the effects of physical pressure and chemical substitutions as tuning parameters. The experimental results are discussed in the context of the well-studied iron-pnictide superconductors and interpretations from theoretical approaches are presented.

Lateral structure of (TiSe2)n(NbSe2)m superlattices

International Nuclear Information System (INIS)

Noh, M.; Shin, H.; Jeong, K.; Spear, J.; Johnson, D.C.; Kevan, S.D.; Warwick, T.

1997-01-01

The structures of a series of (TiSe 2 ) n (NbSe 2 ) m superlattices grown through controlled crystallization of designed multilayer reactants have been studied. X-ray diffraction of the data of the superlattices after crystallization show considerable preferred orientation, with the basal plane of the dichalcogenide structure parallel to the substrate to within 0.1 degree. Lattice refinement using the observed (00scr(l)) diffraction maxima yields lattice parameters along the c axis that are consistent with those expected based on the target superlattices and lattice parameters of the binary constituents. These (00scr(l)) diffraction data, however, contain no information about the crystalline structure in the ab plane of the superlattice associated with the preferred c-axis orientation. Off-specular x-ray diffraction (XRD), scanning electron microscopy, and scanning transmission x-ray microscopy (STXM) were used to explore the structure and homogeneity of the superlattices in the ab plane. XRD results rule out preferred long-range orientational order of the ab plane. Between grains, both the backscattered electron images and STXM images show grain domain structure in the ab plane with a characteristic grain domain size of approximately 50 μm. X-ray absorption microscopy in the STXM mode obtained at the Ti L 2,3 edge shows that the titanium in the superlattices is present as both octahedral Ti consistent with the TiSe 2 structure and metallic Ti. A comparison of the data obtained from these techniques highlights chemical information, which can be deduced on a submicrometer range from the space resolved spectra obtained using STXM. copyright 1997 American Institute of Physics

Effects of crack front curvature on J–R curve testing using clamped SE(T) specimens of homogeneous materials

International Nuclear Information System (INIS)

Huang, Yifan; Zhou, Wenxing

2015-01-01

Three-dimensional (3D) finite element analyses (FEA) of clamped single-edge tension (SE(T)) specimens are performed to investigate the impact of the crack front curvature on the elastic compliance, compliance rotation correction factor and average J-integral evaluated over the crack front. Specimens with six average crack lengths (i.e. a_a_v_e/W = 0.2–0.7) and three thickness-to-width ratios (i.e. B/W = 0.5, 1 and 2) are analyzed. The curved crack front is assumed to be bowed symmetrically and characterized by a power-law expression with a wide range of curvatures. Several crack front straightness requirements for SE(B) and C(T) specimens specified in BS7448, ISO and ASTM E1820 standards are reviewed. Based on results of the numerical investigation, new crack front straightness criteria for the SE(T) specimen are proposed in the context of the nine-point measurement by using as a criterion that the errors in the estimated compliance and average J values should be no more than five percent. The proposed criteria depend on both a_a_v_e/W and B/W, and are more advantageous than those specified in the BS, ISO and ASTM standards in terms of controlling the differences in J and compliance between the specimens with curved and straight crack fronts. - Highlights: • Investigate the impacts of crack front curvature on the compliance, rotation correction factor and J for SE(T) specimens. • Validate the applicabilities of crack front straightness criteria specified in the seven test standards on SE(T) specimens. • Recommend new crack front straightness criteria for the SE(T) specimen.

Unusually large chemical potential shift in a degenerate semiconductor: Angle-resolved photoemission study of SnSe and Na-doped SnSe

Science.gov (United States)

Maeda, M.; Yamamoto, K.; Mizokawa, T.; Saini, N. L.; Arita, M.; Namatame, H.; Taniguchi, M.; Tan, G.; Zhao, L. D.; Kanatzidis, M. G.

2018-03-01

We have studied the electronic structure of SnSe and Na-doped SnSe by means of angle-resolved photoemission spectroscopy. The valence-band top reaches the Fermi level by the Na doping, indicating that Na-doped SnSe can be viewed as a degenerate semiconductor. However, in the Na-doped system, the chemical potential shift with temperature is unexpectedly large and is apparently inconsistent with the degenerate semiconductor picture. The large chemical potential shift and anomalous spectral shape are key ingredients for an understanding of the novel metallic state with the large thermoelectric performance in Na-doped SnSe.

NaviSE: superenhancer navigator integrating epigenomics signal algebra.

Science.gov (United States)

Ascensión, Alex M; Arrospide-Elgarresta, Mikel; Izeta, Ander; Araúzo-Bravo, Marcos J

2017-06-06

Superenhancers are crucial structural genomic elements determining cell fate, and they are also involved in the determination of several diseases, such as cancer or neurodegeneration. Although there are pipelines which use independent pieces of software to predict the presence of superenhancers from genome-wide chromatin marks or DNA-interaction protein binding sites, there is not yet an integrated software tool that processes automatically algebra combinations of raw data sequencing into a comprehensive final annotated report of predicted superenhancers. We have developed NaviSE, a user-friendly streamlined tool which performs a fully-automated parallel processing of genome-wide epigenomics data from sequencing files into a final report, built with a comprehensive set of annotated files that are navigated through a graphic user interface dynamically generated by NaviSE. NaviSE also implements an 'epigenomics signal algebra' that allows the combination of multiple activation and repression epigenomics signals. NaviSE provides an interactive chromosomal landscaping of the locations of superenhancers, which can be navigated to obtain annotated information about superenhancer signal profile, associated genes, gene ontology enrichment analysis, motifs of transcription factor binding sites enriched in superenhancers, graphs of the metrics evaluating the superenhancers quality, protein-protein interaction networks and enriched metabolic pathways among other features. We have parallelised the most time-consuming tasks achieving a reduction up to 30% for a 15 CPUs machine. We have optimized the default parameters of NaviSE to facilitate its use. NaviSE allows different entry levels of data processing, from sra-fastq files to bed files; and unifies the processing of multiple replicates. NaviSE outperforms the more time-consuming processes required in a non-integrated pipeline. Alongside its high performance, NaviSE is able to provide biological insights, predicting cell

Layer Structured Bismuth Selenides of Bi2Se3 and Bi3Se4 for High Energy and Flexible All-Solid-State Micro-Supercapacitors.

Science.gov (United States)

Hao, Chunxue; Wang, Lidan; Wen, Fusheng; Xiang, Jianyong; Li, Lei; Hu, Wentao; Liu, Zhongyuan

2017-12-20

Bismuth selenides (Bi2Se3 and Bi3Se4), both of which have the layered rhombohedral crystal structure, and found to be useful as electrode materials for supercapacitor application in this work. Bi2Se3 nanoplates as electrode material exhibit much better performance than that of Bi3Se4 nanoparticles in liquid electrolyte system (6 M KOH), which delivers a higher specific capacitance (272.9 F/g) than that of Bi3Se4 (193.6 F/g) at 5 mV/s. This result would may be attributed to that Bi2Se3 nanoplates possess more active electrochemical surfaces for the reversible surface redox reactions owing to its planar quintuple stacked layers (septuple layers for Bi3Se4). For the demand of electronic skin, we used a novel flexible annular interdigital structure electrode applying for all-solid-state micro-supercapacitors (AMSCs). Bi2Se3 AMSCs device delivers a much more excellent supercapacitor performance, exhibits a large stack capacitance 89.5 F/cm3 (Bi3Se4: 79.1 F/cm3) at 20 mV/s, a high energy density 17.9 mWh/cm3 and high power density 18.9 W/cm3. The bismuth selenides also exhibit good cycle stability, retention 95.5% (90.3%) after 1000 c for Bi2Se3 (Bi3Se4). Obviously, Bi2Se3 nanoplates can be promising electrode materials for flexible annular interdigital all-solid-sate supercapacitor. © 2017 IOP Publishing Ltd.