Imaging Sensor Flight and Test Equipment Software

Science.gov (United States)

Freestone, Kathleen; Simeone, Louis; Robertson, Byran; Frankford, Maytha; Trice, David; Wallace, Kevin; Wilkerson, DeLisa

2007-01-01

The Lightning Imaging Sensor (LIS) is one of the components onboard the Tropical Rainfall Measuring Mission (TRMM) satellite, and was designed to detect and locate lightning over the tropics. The LIS flight code was developed to run on a single onboard digital signal processor, and has operated the LIS instrument since 1997 when the TRMM satellite was launched. The software provides controller functions to the LIS Real-Time Event Processor (RTEP) and onboard heaters, collects the lightning event data from the RTEP, compresses and formats the data for downlink to the satellite, collects housekeeping data and formats the data for downlink to the satellite, provides command processing and interface to the spacecraft communications and data bus, and provides watchdog functions for error detection. The Special Test Equipment (STE) software was designed to operate specific test equipment used to support the LIS hardware through development, calibration, qualification, and integration with the TRMM spacecraft. The STE software provides the capability to control instrument activation, commanding (including both data formatting and user interfacing), data collection, decompression, and display and image simulation. The LIS STE code was developed for the DOS operating system in the C programming language. Because of the many unique data formats implemented by the flight instrument, the STE software was required to comprehend the same formats, and translate them for the test operator. The hardware interfaces to the LIS instrument using both commercial and custom computer boards, requiring that the STE code integrate this variety into a working system. In addition, the requirement to provide RTEP test capability dictated the need to provide simulations of background image data with short-duration lightning transients superimposed. This led to the development of unique code used to control the location, intensity, and variation above background for simulated lightning strikes

Development of Flexible Software Process Lines with Variability Operations

DEFF Research Database (Denmark)

Dohrmann, Patrick; Schramm, Joachim; Kuhrmann, Marco

2016-01-01

the development of flexible software process lines. Method: We conducted a longitudinal study in which we studied 5 variants of the V-Modell XT process line for 2 years. Results: Our results show the variability operation instrument feasible in practice. We analyzed 616 operation exemplars addressing various...

Designing flexible, ''chemist-friendly'' software to control a radiochemistry autosynthesizer

International Nuclear Information System (INIS)

Feliu, A.L.

1989-01-01

To enhance the utility of process control software to control radiochemistry autosynthesizers used with short-lived positron-emitting isotopes, a scheme is proposed by which routine executive-level tasks, hardware control operations, and chemical procedures have been segregated. This strategy can lead to chemist-friendly control programs for any desired hardware configuration, as illustrated in new software designed to exploit the features and flexibility of the CTI/Siemens Chemical Process Control Unit. (author)

Stochastic Differential Equation-Based Flexible Software Reliability Growth Model

Directory of Open Access Journals (Sweden)

P. K. Kapur

2009-01-01

Full Text Available Several software reliability growth models (SRGMs have been developed by software developers in tracking and measuring the growth of reliability. As the size of software system is large and the number of faults detected during the testing phase becomes large, so the change of the number of faults that are detected and removed through each debugging becomes sufficiently small compared with the initial fault content at the beginning of the testing phase. In such a situation, we can model the software fault detection process as a stochastic process with continuous state space. In this paper, we propose a new software reliability growth model based on Itô type of stochastic differential equation. We consider an SDE-based generalized Erlang model with logistic error detection function. The model is estimated and validated on real-life data sets cited in literature to show its flexibility. The proposed model integrated with the concept of stochastic differential equation performs comparatively better than the existing NHPP-based models.

An open software system based on X Windows for process control and equipment monitoring

International Nuclear Information System (INIS)

Aimar, A.; Carlier, E.; Mertens, V.

1992-01-01

The construction and application of a configurable open software system for process control and equipment monitoring can speed up and simplify the development and maintenance of equipment specific software as compared to individual solutions. The present paper reports the status of such an approach for the distributed control systems of SPS and LEP beam transfer components, based on X Windows and the OSF/Motif tool kit and applying data modeling and software engineering methods. (author)

Specific developed phantoms and software to assess radiological equipment image quality

International Nuclear Information System (INIS)

Verdu, G.; Rodenas, F.

2011-01-01

The use of radiographic phantoms specifically designed to evaluate the operation of the radiographic equipment lets the study of the image quality obtained by this equipment in an objective way. In digital radiographic equipment, the analysis of the image quality can be automatized because the acquisition of the image is possible in different technologies that are, computerized radiography or phosphor plate and direct radiography or detector. In this work we have shown an application to assess automatically the constancy quality image in the image chain of the radiographic equipment. This application is integrated by designed radiographic phantoms which are adapted to conventional, dental equipment and specific developed software for the automatic evaluation of the phantom image quality. The software is based on digital image processing techniques that let the automatic detection of the different phantom tests by edge detector, morphological operators, threshold histogram techniques, etc. The utility developed is enough sensitive to the radiographic equipment of operating conditions of voltage (kV) and charge (mAs). It is a friendly user programme connected with a data base of the hospital or clinic where it has been used. After the phantom image processing the user can obtain an inform with a resume of the imaging system state with accepting and constancy results. (author)

Specific developed phantoms and software to assess radiological equipment image quality

Energy Technology Data Exchange (ETDEWEB)

Verdu, G., E-mail: gverdu@iqn.upv.es [Universidad Politecnica de Valencia (Spain). Dept. de Ingenieria Quimica y Nuclear; Mayo, P., E-mail: p.mayo@titaniast.com [TITANIA Servicios Teconologicos, Valencia (Spain); Rodenas, F., E-mail: frodenas@mat.upv.es [Universidad Politecnica de Valencia (Spain). Dept. de Matematica Aplicada; Campayo, J.M., E-mail: j.campayo@lainsa.com [Logistica y Acondicionamientos Industriales S.A.U (LAINSA), Valencia (Spain)

2011-07-01

The use of radiographic phantoms specifically designed to evaluate the operation of the radiographic equipment lets the study of the image quality obtained by this equipment in an objective way. In digital radiographic equipment, the analysis of the image quality can be automatized because the acquisition of the image is possible in different technologies that are, computerized radiography or phosphor plate and direct radiography or detector. In this work we have shown an application to assess automatically the constancy quality image in the image chain of the radiographic equipment. This application is integrated by designed radiographic phantoms which are adapted to conventional, dental equipment and specific developed software for the automatic evaluation of the phantom image quality. The software is based on digital image processing techniques that let the automatic detection of the different phantom tests by edge detector, morphological operators, threshold histogram techniques, etc. The utility developed is enough sensitive to the radiographic equipment of operating conditions of voltage (kV) and charge (mAs). It is a friendly user programme connected with a data base of the hospital or clinic where it has been used. After the phantom image processing the user can obtain an inform with a resume of the imaging system state with accepting and constancy results. (author)

Software defined multi-OLT passive optical network for flexible traffic allocation

Science.gov (United States)

Zhang, Shizong; Gu, Rentao; Ji, Yuefeng; Zhang, Jiawei; Li, Hui

2016-10-01

With the rapid growth of 4G mobile network and vehicular network services mobile terminal users have increasing demand on data sharing among different radio remote units (RRUs) and roadside units (RSUs). Meanwhile, commercial video-streaming, video/voice conference applications delivered through peer-to-peer (P2P) technology are still keep on stimulating the sharp increment of bandwidth demand in both business and residential subscribers. However, a significant issue is that, although wavelength division multiplexing (WDM) and orthogonal frequency division multiplexing (OFDM) technology have been proposed to fulfil the ever-increasing bandwidth demand in access network, the bandwidth of optical fiber is not unlimited due to the restriction of optical component properties and modulation/demodulation technology, and blindly increase the wavelength cannot meet the cost-sensitive characteristic of the access network. In this paper, we propose a software defined multi-OLT PON architecture to support efficient scheduling of access network traffic. By introducing software defined networking technology and wavelength selective switch into TWDM PON system in central office, multiple OLTs can be considered as a bandwidth resource pool and support flexible traffic allocation for optical network units (ONUs). Moreover, under the configuration of the control plane, ONUs have the capability of changing affiliation between different OLTs under different traffic situations, thus the inter-OLT traffic can be localized and the data exchange pressure of the core network can be released. Considering this architecture is designed to be maximum following the TWDM PON specification, the existing optical distribution network (ODN) investment can be saved and conventional EPON/GPON equipment can be compatible with the proposed architecture. What's more, based on this architecture, we propose a dynamic wavelength scheduling algorithm, which can be deployed as an application on control plane

Instrument Control (iC) – An Open-Source Software to Automate Test Equipment

Science.gov (United States)

Pernstich, K. P.

2012-01-01

It has become common practice to automate data acquisition from programmable instrumentation, and a range of different software solutions fulfill this task. Many routine measurements require sequential processing of certain tasks, for instance to adjust the temperature of a sample stage, take a measurement, and repeat that cycle for other temperatures. This paper introduces an open-source Java program that processes a series of text-based commands that define the measurement sequence. These commands are in an intuitive format which provides great flexibility and allows quick and easy adaptation to various measurement needs. For each of these commands, the iC-framework calls a corresponding Java method that addresses the specified instrument to perform the desired task. The functionality of iC can be extended with minimal programming effort in Java or Python, and new measurement equipment can be addressed by defining new commands in a text file without any programming. PMID:26900522

CAPD Software Development for Automatic Piping System Design: Checking Piping Pocket, Checking Valve Level and Flexibility

International Nuclear Information System (INIS)

Ari Satmoko; Edi Karyanta; Dedy Haryanto; Abdul Hafid; Sudarno; Kussigit Santosa; Pinitoyo, A.; Demon Handoyo

2003-01-01

One of several steps in industrial plant construction is preparing piping layout drawing. In this drawing, pipe and all other pieces such as instrumentation, equipment, structure should be modeled A software called CAPD was developed to replace and to behave as piping drafter or designer. CAPD was successfully developed by adding both subprogram CHKUPIPE and CHKMANV. The first subprogram can check and gives warning if there is piping pocket in the piping system. The second can identify valve position and then check whether valve can be handled by operator hand The main program CAPD was also successfully modified in order to be capable in limiting the maximum length of straight pipe. By limiting the length, piping flexibility can be increased. (author)

Agreement Between Face-to-Face and Free Software Video Analysis for Assessing Hamstring Flexibility in Adolescents.

Science.gov (United States)

Moral-Muñoz, José A; Esteban-Moreno, Bernabé; Arroyo-Morales, Manuel; Cobo, Manuel J; Herrera-Viedma, Enrique

2015-09-01

The objective of this study was to determine the level of agreement between face-to-face hamstring flexibility measurements and free software video analysis in adolescents. Reduced hamstring flexibility is common in adolescents (75% of boys and 35% of girls aged 10). The length of the hamstring muscle has an important role in both the effectiveness and the efficiency of basic human movements, and reduced hamstring flexibility is related to various musculoskeletal conditions. There are various approaches to measuring hamstring flexibility with high reliability; the most commonly used approaches in the scientific literature are the sit-and-reach test, hip joint angle (HJA), and active knee extension. The assessment of hamstring flexibility using video analysis could help with adolescent flexibility follow-up. Fifty-four adolescents from a local school participated in a descriptive study of repeated measures using a crossover design. Active knee extension and HJA were measured with an inclinometer and were simultaneously recorded with a video camera. Each video was downloaded to a computer and subsequently analyzed using Kinovea 0.8.15, a free software application for movement analysis. All outcome measures showed reliability estimates with α > 0.90. The lowest reliability was obtained for HJA (α = 0.91). The preliminary findings support the use of a free software tool for assessing hamstring flexibility, offering health professionals a useful tool for adolescent flexibility follow-up.

The role of original equipment manufacturers in software distribution

Directory of Open Access Journals (Sweden)

Herţanu, A.

2012-01-01

Full Text Available The software distribution channels are having a significant impact on the mix of marketing not only for big companies in this domain, but also for small companies that activate in this domain. The Original Equipment Manufacturer’s distribution channel it’s having a significant impact on the marketing strategy of different companies. If the traditional distribution channels are still used to, the OEM’s channels are used more and more to distribute the software products or services not only to the segment of consumers formed by companies, but also to the segment of costumers formed by individual users.

MODEL OF FUNCTIONING OF TELECOMMUNICATION EQUIPMENT FOR SOFTWARE-CONFIGURATED NETWORKS

Directory of Open Access Journals (Sweden)

Konstantin E. Samouylov

2018-03-01

Full Text Available A mathematical model of the functioning of the switch of a software defined networks is constructed in the form of a queuing network consisting of two queuing systems: the first simulates an input data buffer and a device for reading information from the header of the packet; the second is a table for addressing the switch of a software defined networks. The receipt of data in software defined networks has a probabilistic character in their deterministic processing in communication channels and switching nodes. Therefore, this mathematical model of the functioning of the switch of a software defined networks was built on the basis of queuing systems and networks. The stream of requests flowing into the network was divided into two Poisson streams of various types of applications, the first of which corresponded to the packets that came to the control port of the switch (from the controller, and the second flow to the remaining packets arriving on the switch. The flow corresponding to the packets arriving at the switch from the controller has a relative priority over the flow from the remaining arriving packets As a result, formulas were obtained for calculating the performance indicators of this telecommunications equipment such as average waiting queues for priority and non-priority applications, the probability of loss of applications for each phase of the switch. Based on the received quality of service indicators for this telecommunications equipment, it is possible to assess the stability of switches in software defined networks for various information impacts.

Prototyping low-cost and flexible vehicle diagnostic systems

Directory of Open Access Journals (Sweden)

Marisol GARCÍA-VALLS

2016-12-01

Full Text Available Diagnostic systems are software and hardware-based equipment that interoperate with an external monitored system. Traditionally, they have been expensive equipment running test algorithms to monitor physical properties of, e.g., vehicles, or civil infrastructure equipment, among others. As computer hardware is increasingly powerful (whereas its cost and size is decreasing and communication software becomes easier to program and more run-time efficient, new scenarios are enabled that yield to lower cost monitoring solutions. This paper presents a low cost approach towards the development of a diagnostic systems relying on a modular component-based approach and running on a resource limited embedded computer. Results on a prototype implementation are shown that validate the presented design, its flexibility, performance, and communication latency.

The PurdueTracer: An Energy-Efficient Human-Powered Hydraulic Bicycle with Flexible Operation and Software Aids

Directory of Open Access Journals (Sweden)

Gianluca Marinaro

2018-01-01

Full Text Available Hydrostatic transmissions (HT are widely applied to heavy-duty mobile applications because of the advantages of layout flexibility, power to weight ratio, and ease of control. Though applications of fluid power in light-duty vehicles face challenges, including the unavailability of off-the-shelf components suitable to the power scale, there are potential advantages for HTs in human-powered vehicles, such as bicycles, the most important one being the energy-saving advantage achievable through regenerative braking in a hybrid HT. This paper describes an innovative design for a hydraulic hybrid bicycle, i.e., the PurdueTracer. The PurdueTracer is an energy-efficient human-powered hydraulic bicycle with flexible operation and software aids. An open-circuit hydraulic hybrid transmission allows PurdueTracer to operate in four modes: Pedaling, Charging, Boost, and Regeneration, to satisfy users’ need for different riding occasions. An aluminum chassis that also functions as a system reservoir was customized for the PurdueTracer to optimize the durability, riding comfort, and space for components. The selection of the hydraulic components was performed by creating a model of the bicycle in AMESim simulation software and conducting a numerical optimization based on the model. The electronic system equipped users with informative feedback showing the bicycle performance, intuitive execution of functions, and comprehensive guidance for operation. This paper describes the design approach and the main results of the PurdueTracer, which also won the 2017 National Fluid Power Association Fluid Power Vehicle Challenge. This championship serves to prove the excellence of this vehicle in terms of effectiveness, efficiency, durability, and novelty.

Integrated software system for improving medical equipment management.

Science.gov (United States)

Bliznakov, Z; Pappous, G; Bliznakova, K; Pallikarakis, N

2003-01-01

The evolution of biomedical technology has led to an extraordinary use of medical devices in health care delivery. During the last decade, clinical engineering departments (CEDs) turned toward computerization and application of specific software systems for medical equipment management in order to improve their services and monitor outcomes. Recently, much emphasis has been given to patient safety. Through its Medical Device Directives, the European Union has required all member nations to use a vigilance system to prevent the reoccurrence of adverse events that could lead to injuries or death of patients or personnel as a result of equipment malfunction or improper use. The World Health Organization also has made this issue a high priority and has prepared a number of actions and recommendations. In the present workplace, a new integrated, Windows-oriented system is proposed, addressing all tasks of CEDs but also offering a global approach to their management needs, including vigilance. The system architecture is based on a star model, consisting of a central core module and peripheral units. Its development has been based on the integration of 3 software modules, each one addressing specific predefined tasks. The main features of this system include equipment acquisition and replacement management, inventory archiving and monitoring, follow up on scheduled maintenance, corrective maintenance, user training, data analysis, and reports. It also incorporates vigilance monitoring and information exchange for adverse events, together with a specific application for quality-control procedures. The system offers clinical engineers the ability to monitor and evaluate the quality and cost-effectiveness of the service provided by means of quality and cost indicators. Particular emphasis has been placed on the use of harmonized standards with regard to medical device nomenclature and classification. The system's practical applications have been demonstrated through a pilot

Point-of-Care Test Equipment for Flexible Laboratory Automation.

Science.gov (United States)

You, Won Suk; Park, Jae Jun; Jin, Sung Moon; Ryew, Sung Moo; Choi, Hyouk Ryeol

2014-08-01

Blood tests are some of the core clinical laboratory tests for diagnosing patients. In hospitals, an automated process called total laboratory automation, which relies on a set of sophisticated equipment, is normally adopted for blood tests. Noting that the total laboratory automation system typically requires a large footprint and significant amount of power, slim and easy-to-move blood test equipment is necessary for specific demands such as emergency departments or small-size local clinics. In this article, we present a point-of-care test system that can provide flexibility and portability with low cost. First, the system components, including a reagent tray, dispensing module, microfluidic disk rotor, and photometry scanner, and their functions are explained. Then, a scheduler algorithm to provide a point-of-care test platform with an efficient test schedule to reduce test time is introduced. Finally, the results of diagnostic tests are presented to evaluate the system. © 2014 Society for Laboratory Automation and Screening.

Solar Constant (SOLCON) Experiment: Ground Support Equipment (GSE) software development

Science.gov (United States)

Gibson, M. Alan; Thomas, Susan; Wilson, Robert

1991-01-01

The Solar Constant (SOLCON) Experiment, the objective of which is to determine the solar constant value and its variability, is scheduled for launch as part of the Space Shuttle/Atmospheric Laboratory for Application and Science (ATLAS) spacelab mission. The Ground Support Equipment (GSE) software was developed to monitor and analyze the SOLCON telemetry data during flight and to test the instrument on the ground. The design and development of the GSE software are discussed. The SOLCON instrument was tested during Davos International Solar Intercomparison, 1989 and the SOLCON data collected during the tests are analyzed to study the behavior of the instrument.

The Use of Flexible, Interactive, Situation-Focused Software for the E-Learning of Mathematics.

Science.gov (United States)

Farnsworth, Ralph Edward

This paper discusses the classroom, home, and distance use of new, flexible, interactive, application-oriented software known as Active Learning Suite. The actual use of the software, not just a controlled experiment, is reported on. Designed for the e-learning of university mathematics, the program was developed by a joint U.S.-Russia team and…

RASPA: molecular simulation software for adsorption and diffusion in flexible nanoporous materials

NARCIS (Netherlands)

Dubbeldam, D.; Calero, S.; Ellis, D.E.; Snurr, R.Q.

2016-01-01

A new software package, RASPA, for simulating adsorption and diffusion of molecules in flexible nanoporous materials is presented. The code implements the latest state-of-the-art algorithms for molecular dynamics and Monte Carlo (MC) in various ensembles including symplectic/measure-preserving

AUTOMATED LOW-COST PHOTOGRAMMETRY FOR FLEXIBLE STRUCTURE MONITORING

Directory of Open Access Journals (Sweden)

C. H. Wang

2012-07-01

Full Text Available Structural monitoring requires instruments which can provide high precision and accuracy, reliable measurements at good temporal resolution and rapid processing speeds. Long-term campaigns and flexible structures are regarded as two of the most challenging subjects in monitoring engineering structures. Long-term monitoring in civil engineering is generally considered to be labourintensive and financially expensive and it can take significant effort to arrange the necessary human resources, transportation and equipment maintenance. When dealing with flexible structure monitoring, it is of paramount importance that any monitoring equipment used is able to carry out rapid sampling. Low cost, automated, photogrammetric techniques therefore have the potential to become routinely viable for monitoring non-rigid structures. This research aims to provide a photogrammetric solution for long-term flexible structural monitoring purposes. The automated approach was achieved using low-cost imaging devices (mobile phones to replace traditional image acquisition stations and substantially reduce the equipment costs. A self-programmed software package was developed to deal with the hardware-software integration and system operation. In order to evaluate the performance of this low-cost monitoring system, a shaking table experiment was undertaken. Different network configurations and target sizes were used to determine the best configuration. A large quantity of image data was captured by four DSLR cameras and four mobile phone cameras respectively. These image data were processed using photogrammetric techniques to calculate the final results for the system evaluation.

Electronic equipment and software for device 'FAZA'

International Nuclear Information System (INIS)

Avdeev, S.P.; Karnaukhov, V.A.; Kuznetsov, V.D.; Petrov, L.A.; Oeschler, H.; Lips, F.; Bart, R.

1992-01-01

Electronic equipment and software for the device FAZA are described. The device, designed for studying the nuclear multifragmentation process, consists of 5 time-of-flight telescopes, a position-sensitive avalanche chamber and 58 PM tubes. The time resolution of the time-of-flight telescopes is 0.5 ns, which allows a velocity resolution of 1.5%. The spatial resolution of the large avalanche counter is 4 mm, which allows angular resolution of 1 deg. Analogue signals from each PM tube come to two ADCs, to which strobes are supplied with a 400 ns shift. It allows codes corresponding to Cherenkov radiation and deexcitation of CsJ(Tl) to be distinguished in a two-dimensional plot. 8 refs.; 2 figs

Flexible test automation a software framework for easily developing measurement applications

CERN Document Server

Arpaia, Pasquale; De Matteis, Ernesto

2014-01-01

In laboratory management of an industrial test division, a test laboratory, or a research center, one of the main activities is producing suitable software for automatic benches by satisfying a given set of requirements. This activity is particularly costly and burdensome when test requirements are variable over time. If the batches of objects have small size and frequent occurrence, the activity of measurement automation becomes predominating with respect to the test execution. Flexible Test Automation shows the development of a software framework as a useful solution to satisfy this exigency. The framework supports the user in producing measurement applications for a wide range of requirements with low effort and development time.

SeisFlows-Flexible waveform inversion software

Science.gov (United States)

Modrak, Ryan T.; Borisov, Dmitry; Lefebvre, Matthieu; Tromp, Jeroen

2018-06-01

SeisFlows is an open source Python package that provides a customizable waveform inversion workflow and framework for research in oil and gas exploration, earthquake tomography, medical imaging, and other areas. New methods can be rapidly prototyped in SeisFlows by inheriting from default inversion or migration classes, and code can be tested on 2D examples before application to more expensive 3D problems. Wave simulations must be performed using an external software package such as SPECFEM3D. The ability to interface with external solvers lends flexibility, and the choice of SPECFEM3D as a default option provides optional GPU acceleration and other useful capabilities. Through support for massively parallel solvers and interfaces for high-performance computing (HPC) systems, inversions with thousands of seismic traces and billions of model parameters can be performed. So far, SeisFlows has run on clusters managed by the Department of Defense, Chevron Corp., Total S.A., Princeton University, and the University of Alaska, Fairbanks.

ROCKETSHIP: a flexible and modular software tool for the planning, processing and analysis of dynamic MRI studies

International Nuclear Information System (INIS)

Barnes, Samuel R.; Ng, Thomas S. C.; Santa-Maria, Naomi; Montagne, Axel; Zlokovic, Berislav V.; Jacobs, Russell E.

2015-01-01

Dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) is a promising technique to characterize pathology and evaluate treatment response. However, analysis of DCE-MRI data is complex and benefits from concurrent analysis of multiple kinetic models and parameters. Few software tools are currently available that specifically focuses on DCE-MRI analysis with multiple kinetic models. Here, we developed ROCKETSHIP, an open-source, flexible and modular software for DCE-MRI analysis. ROCKETSHIP incorporates analyses with multiple kinetic models, including data-driven nested model analysis. ROCKETSHIP was implemented using the MATLAB programming language. Robustness of the software to provide reliable fits using multiple kinetic models is demonstrated using simulated data. Simulations also demonstrate the utility of the data-driven nested model analysis. Applicability of ROCKETSHIP for both preclinical and clinical studies is shown using DCE-MRI studies of the human brain and a murine tumor model. A DCE-MRI software suite was implemented and tested using simulations. Its applicability to both preclinical and clinical datasets is shown. ROCKETSHIP was designed to be easily accessible for the beginner, but flexible enough for changes or additions to be made by the advanced user as well. The availability of a flexible analysis tool will aid future studies using DCE-MRI. A public release of ROCKETSHIP is available at (https://github.com/petmri/ROCKETSHIP)

DAMARIS – a flexible and open software platform for NMR spectrometer control

OpenAIRE

Gädke, Achim; Rosenstihl, Markus; Schmitt, Christopher; Stork, Holger; Nestle, Nikolaus

2016-01-01

Home-built NMR spectrometers with self-written control software have a long tradition in porous media research. Advantages of such spectrometers are not just lower costs but also more flexibility in developing new experiments (while commercial NMR systems are typically optimized for standard applications such as spectroscopy, imaging or quality control applications). Increasing complexity of computer operating systems, higher expectations with respect to user-friendliness and graphical use...

INTEGRACION DE UNA CELULA FLEXIBLE DE MECANIZADO, DE TIPO DOCENTE INTEGRATION OF A EDUCATIONAL FLEXIBLE MANUFACTURING CELL

Directory of Open Access Journals (Sweden)

Abraham Farias F

2007-04-01

Full Text Available Este trabajo trata sobre la integración de una célula flexible de mecanizado de tipo docente, compuesta por una fresadora didáctica CNC, marca Denford, un brazo robótico articulado de seis ejes, modelo Scorbot -ER Vplus  y un riel deslizante; todos pertenecientes al Laboratorio de Manufactura Integrada por Computador, de la Escuela de Ingeniería Mecánica de la Universidad de Talca. Las tareas que realiza esta célula flexible son controladas por un PC director  a través de un  programa, utilizando el software y el propio control del robot y su objetivo es realizar el ciclo de carga y descarga de un  trozo de material de 65×65×40 mm. (madera y su posterior mecanización. El problema de comunicación entre los equipos involucrados y la fresadora CNC fue resuelto en cuanto su diseño "stand alone" no contemplaba la integración con otros equipos. Por otro lado, se agregaron algunos sistemas electroneumáticos para que la operación fuera automática, como los de sujeción de piezas y la apertura y cierre de puertas. Con esta célula flexible de mecanizado de tipo docente, la facultad de Ingeniería cuenta con una plataforma básica, a la que se puede adicionar otras funciones, como por ejemplo, dotarla de un sistema automático de alimentación de piezas, de un sistema de visión digital para dar más autonomía al robot, incorporar un torno CNC y  generar un programa para administrar las órdenes de trabajo.This paper describes the integration of an educational flexible manufacturing cell, consisting of a Denford CNC mill with six axes, and a Scorbot - ER Vplus robotic arm that slides along a rail. This equipment is located at the Computer Integrated Manufacture Laboratory, at the School of Mechanical Engineering at Universidad de Talca. The flexible cell is controlled by software in a PC that interacts with the software in the robotic arm. The specific tasks described in this paper are loading and unloading a wooden piece (640×65�

A hardware-software system for the automation of verification and calibration of oil metering units secondary equipment

Science.gov (United States)

Boyarnikov, A. V.; Boyarnikova, L. V.; Kozhushko, A. A.; Sekachev, A. F.

2017-08-01

In the article the process of verification (calibration) of oil metering units secondary equipment is considered. The purpose of the work is to increase the reliability and reduce the complexity of this process by developing a software and hardware system that provides automated verification and calibration. The hardware part of this complex carries out the commutation of the measuring channels of the verified controller and the reference channels of the calibrator in accordance with the introduced algorithm. The developed software allows controlling the commutation of channels, setting values on the calibrator, reading the measured data from the controller, calculating errors and compiling protocols. This system can be used for checking the controllers of the secondary equipment of the oil metering units in the automatic verification mode (with the open communication protocol) or in the semi-automatic verification mode (without it). The peculiar feature of the approach used is the development of a universal signal switch operating under software control, which can be configured for various verification methods (calibration), which allows to cover the entire range of controllers of metering units secondary equipment. The use of automatic verification with the help of a hardware and software system allows to shorten the verification time by 5-10 times and to increase the reliability of measurements, excluding the influence of the human factor.

Model-integrating software components engineering flexible software systems

CERN Document Server

Derakhshanmanesh, Mahdi

2015-01-01

In his study, Mahdi Derakhshanmanesh builds on the state of the art in modeling by proposing to integrate models into running software on the component-level without translating them to code. Such so-called model-integrating software exploits all advantages of models: models implicitly support a good separation of concerns, they are self-documenting and thus improve understandability and maintainability and in contrast to model-driven approaches there is no synchronization problem anymore between the models and the code generated from them. Using model-integrating components, software will be

Quality assurance applied to mammographic equipments using phantoms and software for its evaluation

Energy Technology Data Exchange (ETDEWEB)

Mayo, Patricia, E-mail: p.mayo@titaniast.co [Titania Servicios Tecnologicos S.L., Grupo Dominguis, Apartado 46015, Valencia (Spain); Rodenas, Francisco [Departamento de Matematica Aplicada, Universidad Politecnica de Valencia, Apartado 46022, Valencia (Spain); Manuel Campayo, Juan [Hospital Clinico Universitario de Valencia, Avda. Blasco Ibanez, Apartado 46017, Valencia (Spain); Verdu, Gumersido [Departamento de Ingenieria Quimica y Nuclear, Universidad Politecnica de Valencia, Apartado 46022, Valencia (Spain)

2010-07-21

The image quality assessment in radiographic equipments is a very important item for a complete quality control of the radiographic image chain. The periodic evaluation of the radiographic image quality must guarantee the constancy of this quality to carry out a suitable diagnosis. Mammographic phantom images are usually used to study the quality of images obtained by determined mammographic equipment. The digital image treatment techniques allow to carry out an automatic analysis of the phantom image. In this work we apply some techniques of digital image processing to analyze in an automatic way the image quality of mammographic phantoms, namely CIRS SP01 and RACON for different varying conditions of the mammographic equipment. The CIRS SP01 phantom is usually used in analogic mammographic equipments and the RACON phantom has been specifically developed by authors to be applied to acceptance and constancy tests of the image quality in digital radiographic equipments following recommendations of international associations. The purpose of this work consists in analyzing the image quality for both phantoms by means of an automatic software utility. This analysis allows us to study the functioning of the image chain of the mammographic system in an objective way, so an abnormal functioning of the radiographic equipment might be detected.

Quality assurance applied to mammographic equipments using phantoms and software for its evaluation

International Nuclear Information System (INIS)

Mayo, Patricia; Rodenas, Francisco; Manuel Campayo, Juan; Verdu, Gumersido

2010-01-01

The image quality assessment in radiographic equipments is a very important item for a complete quality control of the radiographic image chain. The periodic evaluation of the radiographic image quality must guarantee the constancy of this quality to carry out a suitable diagnosis. Mammographic phantom images are usually used to study the quality of images obtained by determined mammographic equipment. The digital image treatment techniques allow to carry out an automatic analysis of the phantom image. In this work we apply some techniques of digital image processing to analyze in an automatic way the image quality of mammographic phantoms, namely CIRS SP01 and RACON for different varying conditions of the mammographic equipment. The CIRS SP01 phantom is usually used in analogic mammographic equipments and the RACON phantom has been specifically developed by authors to be applied to acceptance and constancy tests of the image quality in digital radiographic equipments following recommendations of international associations. The purpose of this work consists in analyzing the image quality for both phantoms by means of an automatic software utility. This analysis allows us to study the functioning of the image chain of the mammographic system in an objective way, so an abnormal functioning of the radiographic equipment might be detected.

SORPAS – The Professional Software for Simulation of Resistance Welding

DEFF Research Database (Denmark)

Zhang, Wenqi

2002-01-01

and easily operate and utilize the software. With the user-friendly facilities for flexible geometric design of work pieces and electrodes as well as process parameter settings similar to real machine parameter settings, the software has been readily applied in industry for supporting product development...... applied in industries including automotive, electronics and other metal processing industries as well as welding equipment manufacturers....... directly usable by engineers and technicians in industry, all of the important parameters in resistance welding are considered and automatically implemented into the software. With the specially designed graphic user interface for Windows, engineers (even without prior knowledge of FEM) can quickly learn...

Design and Implementation of Software for Resistance Welding Process Simulations

DEFF Research Database (Denmark)

Zhang, Wenqi

2003-01-01

Based on long time engineering research and dedicated collaborations with industry, a new welding software, SORPAS, has been developed for simulation of resistance projection and spot welding processes applying the powerful finite element method (FEM). In order to make the software directly usabl...... equipment manufacturers...... by engineers and technicians in industry, all of the important parameters in resistance welding are considered and automatically implemented into the software. With the specially designed graphic user interface for Windows, engineers (even without prior knowledge of FEM) can quickly learn and easily operate...... and utilize the software. All industrial users, including welding engineers from DaimlerChrysler, Volkswangen, PSA Peugeot Citroen, VOLVO, Siemens, ABB and so on, have started using the software just after taking a one-day training course. With the user-friendly facilities for flexible geometric design...

Earth Observing System (EOS)/ Advanced Microwave Sounding Unit-A (AMSU-A): Special Test Equipment. Software Requirements

Science.gov (United States)

Schwantje, Robert

1995-01-01

This document defines the functional, performance, and interface requirements for the Earth Observing System/Advanced Microwave Sounding Unit-A (EOS/AMSU-A) Special Test Equipment (STE) software used in the test and integration of the instruments.

COLUMBUS as Engineering Testbed for Communications and Multimedia Equipment

Science.gov (United States)

Bank, C.; Anspach von Broecker, G. O.; Kolloge, H.-G.; Richters, M.; Rauer, D.; Urban, G.; Canovai, G.; Oesterle, E.

2002-01-01

The paper presents ongoing activities to prepare COLUMBUS for communications and multimedia technology experiments. For this purpose, Astrium SI, Bremen, has studied several options how to best combine the given system architecture with flexible and state-of-the-art interface avionics and software. These activities have been conducted in coordination with, and partially under contract of, DLR and ESA/ESTEC. Moreover, Astrium SI has realized three testbeds for multimedia software and hardware testing under own funding. The experimental core avionics unit - about a half double rack - establishes the core of a new multi-user experiment facility for this type of investigation onboard COLUMBUS, which shall be available to all users of COLUMBUS. It allows for the connection of 2nd generation payload, that is payload requiring broadband data transfer and near-real-time access by the Principal Investigator on ground, to test highly interactive and near-realtime payload operation. The facility is also foreseen to test new equipment to provide the astronauts onboard the ISS/COLUMBUS with bi- directional hi-fi voice and video connectivity to ground, private voice coms and e-mail, and a multimedia workstation for ops training and recreation. Connection to an appropriate Wide Area Network (WAN) on Earth is possible. The facility will include a broadband data transmission front-end terminal, which is mounted externally on the COLUMBUS module. This Equipment provides high flexibility due to the complete transparent transmit and receive chains, the steerable multi-frequency antenna system and its own thermal and power control and distribution. The Equipment is monitored and controlled via the COLUMBUS internal facility. It combines several new hardware items, which are newly developed for the next generation of broadband communication satellites and operates in Ka -Band with the experimental ESA data relay satellite ARTEMIS. The equipment is also TDRSS compatible; the open loop

Detecting P2P Botnet in Software Defined Networks

Directory of Open Access Journals (Sweden)

Shang-Chiuan Su

2018-01-01

Full Text Available Software Defined Network separates the control plane from network equipment and has great advantage in network management as compared with traditional approaches. With this paradigm, the security issues persist to exist and could become even worse because of the flexibility on handling the packets. In this paper we propose an effective framework by integrating SDN and machine learning to detect and categorize P2P network traffics. This work provides experimental evidence showing that our approach can automatically analyze network traffic and flexibly change flow entries in OpenFlow switches through the SDN controller. This can effectively help the network administrators manage related security problems.

Flexible software architecture for user-interface and machine control in laboratory automation.

Science.gov (United States)

Arutunian, E B; Meldrum, D R; Friedman, N A; Moody, S E

1998-10-01

We describe a modular, layered software architecture for automated laboratory instruments. The design consists of a sophisticated user interface, a machine controller and multiple individual hardware subsystems, each interacting through a client-server architecture built entirely on top of open Internet standards. In our implementation, the user-interface components are built as Java applets that are downloaded from a server integrated into the machine controller. The user-interface client can thereby provide laboratory personnel with a familiar environment for experiment design through a standard World Wide Web browser. Data management and security are seamlessly integrated at the machine-controller layer using QNX, a real-time operating system. This layer also controls hardware subsystems through a second client-server interface. This architecture has proven flexible and relatively easy to implement and allows users to operate laboratory automation instruments remotely through an Internet connection. The software architecture was implemented and demonstrated on the Acapella, an automated fluid-sample-processing system that is under development at the University of Washington.

Data center equipment location and monitoring system

DEFF Research Database (Denmark)

2011-01-01

A data center equipment location system includes both hardware and software to provide for location, monitoring, security and identification of servers and other equipment in equipment racks. The system provides a wired alternative to the wireless RFID tag system by using electronic ID tags...... connected to each piece of equipment, each electronic ID tag connected directly by wires to a equipment rack controller on the equipment rack. The equipment rack controllers then link over a local area network to a central control computer. The central control computer provides an operator interface......, and runs a software application program that communicates with the equipment rack controllers. The software application program of the central control computer stores IDs of the equipment rack controllers and each of its connected electronic ID tags in a database.; The software application program...

Constraint Network Analysis (CNA): a Python software package for efficiently linking biomacromolecular structure, flexibility, (thermo-)stability, and function.

Science.gov (United States)

Pfleger, Christopher; Rathi, Prakash Chandra; Klein, Doris L; Radestock, Sebastian; Gohlke, Holger

2013-04-22

For deriving maximal advantage from information on biomacromolecular flexibility and rigidity, results from rigidity analyses must be linked to biologically relevant characteristics of a structure. Here, we describe the Python-based software package Constraint Network Analysis (CNA) developed for this task. CNA functions as a front- and backend to the graph-based rigidity analysis software FIRST. CNA goes beyond the mere identification of flexible and rigid regions in a biomacromolecule in that it (I) provides a refined modeling of thermal unfolding simulations that also considers the temperature-dependence of hydrophobic tethers, (II) allows performing rigidity analyses on ensembles of network topologies, either generated from structural ensembles or by using the concept of fuzzy noncovalent constraints, and (III) computes a set of global and local indices for quantifying biomacromolecular stability. This leads to more robust results from rigidity analyses and extends the application domain of rigidity analyses in that phase transition points ("melting points") and unfolding nuclei ("structural weak spots") are determined automatically. Furthermore, CNA robustly handles small-molecule ligands in general. Such advancements are important for applying rigidity analysis to data-driven protein engineering and for estimating the influence of ligand molecules on biomacromolecular stability. CNA maintains the efficiency of FIRST such that the analysis of a single protein structure takes a few seconds for systems of several hundred residues on a single core. These features make CNA an interesting tool for linking biomacromolecular structure, flexibility, (thermo-)stability, and function. CNA is available from http://cpclab.uni-duesseldorf.de/software for nonprofit organizations.

The Model of the Software Running on a Computer Equipment Hardware Included in the Grid network

Directory of Open Access Journals (Sweden)

T. A. Mityushkina

2012-12-01

Full Text Available A new approach to building a cloud computing environment using Grid networks is proposed in this paper. The authors describe the functional capabilities, algorithm, model of software running on a computer equipment hardware included in the Grid network, that will allow to implement cloud computing environment using Grid technologies.

Flexible receiver adapter formal design review

International Nuclear Information System (INIS)

Krieg, S.A.

1995-01-01

This memo summarizes the results of the Formal (90%) Design Review process and meetings held to evaluate the design of the Flexible Receiver Adapters, support platforms, and associated equipment. The equipment is part of the Flexible Receiver System used to remove, transport, and store long length contaminated equipment and components from both the double and single-shell underground storage tanks at the 200 area tank farms

PT-SAFE: a software tool for development and annunciation of medical audible alarms.

Science.gov (United States)

Bennett, Christopher L; McNeer, Richard R

2012-03-01

Recent reports by The Joint Commission as well as the Anesthesia Patient Safety Foundation have indicated that medical audible alarm effectiveness needs to be improved. Several recent studies have explored various approaches to improving the audible alarms, motivating the authors to develop real-time software capable of comparing such alarms. We sought to devise software that would allow for the development of a variety of audible alarm designs that could also integrate into existing operating room equipment configurations. The software is meant to be used as a tool for alarm researchers to quickly evaluate novel alarm designs. A software tool was developed for the purpose of creating and annunciating audible alarms. The alarms consisted of annunciators that were mapped to vital sign data received from a patient monitor. An object-oriented approach to software design was used to create a tool that is flexible and modular at run-time, can annunciate wave-files from disk, and can be programmed with MATLAB by the user to create custom alarm algorithms. The software was tested in a simulated operating room to measure technical performance and to validate the time-to-annunciation against existing equipment alarms. The software tool showed efficacy in a simulated operating room environment by providing alarm annunciation in response to physiologic and ventilator signals generated by a human patient simulator, on average 6.2 seconds faster than existing equipment alarms. Performance analysis showed that the software was capable of supporting up to 15 audible alarms on a mid-grade laptop computer before audio dropouts occurred. These results suggest that this software tool provides a foundation for rapidly staging multiple audible alarm sets from the laboratory to a simulation environment for the purpose of evaluating novel alarm designs, thus producing valuable findings for medical audible alarm standardization.

Experiment with flexible electric power consumption. Appendix; Demonstrationsforsoeg med fleksibelt elforbrug. Bilag

Energy Technology Data Exchange (ETDEWEB)

Pedersen, Thomas Emil (Dong Energy A/S, Fredericia (Denmark))

2009-09-15

The emergence of interactive meters with communication module has made it possible that electricity consumption at different customer segments can be activated in a new way of benefit for the customer, the electricity company and the system operator. In this demonstration project the customer segment is larger commercial properties and public institutions. The appendix contains information about the pilot software, guide to install equipment to handle flexible power consumption, model for economic calculations, and the experiments at 3 different buildings are described. (ln)

Software for improving the quality of project management, a case study: international manufacture of electrical equipment

Science.gov (United States)

Preradović, D. M.; Mićić, Lj S.; Barz, C.

2017-05-01

Production conditions in today’s world require software support at every stage of production and development of new products, for quality assurance and compliance with ISO standards. In addition to ISO standards such as usual metrics of quality, companies today are focused on other optional standards, such as CMMI (Capability Maturity Model Integrated) or prescribing they own standards. However, while there is intensive progress being made in the PM (project management), there is still a significant number of projects, at the global level, that are failures. These have failed to achieve their goals, within budget or timeframe. This paper focuses on checking the role of software tools through the rate of success in projects implemented in the case of internationally manufactured electrical equipment. The results of this research show the level of contribution of the project management software used to manage and develop new products to improve PM processes and PM functions, and how selection of the software tools affects the quality of PM processes and successfully completed projects.

Equipment Obsolescence Analysis and Management Software

Energy Technology Data Exchange (ETDEWEB)

Redmond, J.; Carret, L.; Shaon, S.; Schultz, C.

2015-07-01

The procurement engineering resources at Nuclear Power Plants (NPPs) are experiencing increasing backlog for procurement items primarily due to the inability to order the original replacement parts. The level of effort and time required to prepare procurement packages is increasing since the number of obsolete parts are increasing exponentially. Procurement packages for obsolete components and parts are much more complex and take more time to prepare because of the need to perform equivalency evaluations, testing requirements and test acceptance criteria development, commercial grade dedication or equipment qualification, and increasing efforts to verify that no fraudulent or counterfeit parts are procured. This problem will be further compounded when NPPs pursue license renewal and approval for plant-life extension. Advanced planning and advanced knowledge of equipment obsolescence is required to allow for sufficient time to properly procure replacement parts for obsolete items. The uncertain supply chain capability due to obsolescence is a real problem and can cause a risk to reliable plant operations due to the potential for a lack of available spare parts and replacement components to support outages and unplanned component failures. Advanced notification of obsolescence is increasingly more important to ensure that adequate time and planning is scheduled to procure the proper replacement parts. A thorough analysis of Original Equipment Manufacturer (OEM) availability and inventory as well as an analysis of failure rates and usage rates is required to predict critical part needs to allow for early identification of obsolescence issues so that a planned and controlled strategy to qualify replacement equipment can be implemented. (Author)

Miniature EVA Software Defined Radio

Science.gov (United States)

Pozhidaev, Aleksey

2012-01-01

As NASA embarks upon developing the Next-Generation Extra Vehicular Activity (EVA) Radio for deep space exploration, the demands on EVA battery life will substantially increase. The number of modes and frequency bands required will continue to grow in order to enable efficient and complex multi-mode operations including communications, navigation, and tracking applications. Whether conducting astronaut excursions, communicating to soldiers, or first responders responding to emergency hazards, NASA has developed an innovative, affordable, miniaturized, power-efficient software defined radio that offers unprecedented power-efficient flexibility. This lightweight, programmable, S-band, multi-service, frequency- agile EVA software defined radio (SDR) supports data, telemetry, voice, and both standard and high-definition video. Features include a modular design, an easily scalable architecture, and the EVA SDR allows for both stationary and mobile battery powered handheld operations. Currently, the radio is equipped with an S-band RF section. However, its scalable architecture can accommodate multiple RF sections simultaneously to cover multiple frequency bands. The EVA SDR also supports multiple network protocols. It currently implements a Hybrid Mesh Network based on the 802.11s open standard protocol. The radio targets RF channel data rates up to 20 Mbps and can be equipped with a real-time operating system (RTOS) that can be switched off for power-aware applications. The EVA SDR's modular design permits implementation of the same hardware at all Network Nodes concept. This approach assures the portability of the same software into any radio in the system. It also brings several benefits to the entire system including reducing system maintenance, system complexity, and development cost.

Reuse of Electronic Equipment and Software Installed on Them ‒ an Exploratory Analysis in the Context of Circular Economy

Directory of Open Access Journals (Sweden)

Cristian Bogdan Onete

2018-05-01

Full Text Available The transition to a circular economy in which the value of products, materials and resources is maintained as long as possible and the waste is minimized, has led to the creation of new business opportunities and new, innovative and efficient production and consumption models. Over the last few years, the principles of the circular economy have been gradually integrated into several sectors, the consumer electronics industry being such an example. The applicability of the circular economy principles in this sector has been presented in the literature, but these approaches have taken into account, in particular, the physical, tangible components of electronic products, focusing on the existing interrelationships between the circular economy and the production and use of electronic devices and equipment. Given that electronic products often incorporate intangible components, namely the software necessary for their operation, we have chosen to address in this paper the problems of the circular economy from this perspective, the purpose of this paper being to emphasize the relation between the use of software products and the principles of circular economy. Thus, the paper presents the main opportunities and challenges that circular economy involves for all stakeholders, namely manufacturers of electronic goods and developers of the related software and their users. In order to determine the way consumers capitalize the possibilities to reuse the software components of IT products they use (computers, tablets, mobile phones, we have undertaken an exploratory research that took place between October and November 2017 on the basis of a structured questionnaire posted online and applied to Romanian young people, the number of respondents being 257. Research has shown the respondents easily adapt to new versions of software when they change their phone or laptop and there is a frequent transfer of equipment without considering the possibilities of reuse

Reconciliation of equipment flexibility effects on piping system dynamic response

International Nuclear Information System (INIS)

Geraets, L.H.

1987-01-01

Piping systems are connected to equipment; if the equipment cannot be considered as ''rigid'' relative to excitation frequencies, nozzle response spectra techniques, or equipment modeling techniques are used. If the equipment is considered rigid, a fixed anchor is assumed. However, occasionally after (seismic) dynamic analysis has been completed, tests or detailed equipment dynamic analyses demonstrate that the assumption of ''infinite stiff'' is questionable. This paper reviews several classes of equipment (pumps, vessels, reservoirs, heat exchangers), and the associated (piping stresses, support loads, equipment nozzle allowables). Significant divergences between design and ''as built'' results are shown (for heat exchangers in particular). The paper discusses the reconciliation process performed for a belgian PWR plant through the use of less conservative seismic damping data (Code Case N-411)

Utilizing Visual Effects Software for Efficient and Flexible Isostatic Adjustment Modelling

Science.gov (United States)

Meldgaard, A.; Nielsen, L.; Iaffaldano, G.

2017-12-01

The isostatic adjustment signal generated by transient ice sheet loading is an important indicator of past ice sheet extent and the rheological constitution of the interior of the Earth. Finite element modelling has proved to be a very useful tool in these studies. We present a simple numerical model for 3D visco elastic Earth deformation and a new approach to the design of such models utilizing visual effects software designed for the film and game industry. The software package Houdini offers an assortment of optimized tools and libraries which greatly facilitate the creation of efficient numerical algorithms. In particular, we make use of Houdini's procedural work flow, the SIMD programming language VEX, Houdini's sparse matrix creation and inversion libraries, an inbuilt tetrahedralizer for grid creation, and the user interface, which facilitates effortless manipulation of 3D geometry. We mitigate many of the time consuming steps associated with the authoring of efficient algorithms from scratch while still keeping the flexibility that may be lost with the use of commercial dedicated finite element programs. We test the efficiency of the algorithm by comparing simulation times with off-the-shelf solutions from the Abaqus software package. The algorithm is tailored for the study of local isostatic adjustment patterns, in close vicinity to present ice sheet margins. In particular, we wish to examine possible causes for the considerable spatial differences in the uplift magnitude which are apparent from field observations in these areas. Such features, with spatial scales of tens of kilometres, are not resolvable with current global isostatic adjustment models, and may require the inclusion of local topographic features. We use the presented algorithm to study a near field area where field observations are abundant, namely, Disko Bay in West Greenland with the intention of constraining Earth parameters and ice thickness. In addition, we assess how local

Analysis on flexible manufacturing system layout using arena simulation software

Science.gov (United States)

Fadzly, M. K.; Saad, Mohd Sazli; Shayfull, Z.

2017-09-01

Flexible manufacturing system (FMS) was defined as highly automated group technology machine cell, consisting of a group of processing stations interconnected by an automated material handling and storage system, and controlled by an integrated computer system. FMS can produce parts or products are in the mid-volume, mid-variety production range. The layout system in FMS is an important criterion to design the FMS system to produce a part or product. This facility layout of an FMS involves the positioning of cells within given boundaries, so as to minimize the total projected travel time between cells. Defining the layout includes specifying the spatial coordinates of each cell, its orientation in either a horizontal or vertical position, and the location of its load or unloads point. There are many types of FMS layout such as In-line, loop ladder and robot centered cell layout. The research is concentrating on the design and optimization FMS layout. The final conclusion can be summarized that the objective to design and optimisation of FMS layout for this study is successful because the FMS In-line layout is the best layout based on effective time and cost using ARENA simulation software.

US8,994,532 "Data Center Equipment Location and Monitoring System"

DEFF Research Database (Denmark)

2014-01-01

A data center equipment location system includes both hardware and software to provide for location, monitoring, security and identification of servers and other equipment in equipment racks. The system provides a wired alternative to the wireless RFID tag system by using electronic ID tags...... connected to each piece of equipment, each electronic ID tag connected directly by wires to a equipment rack controller on the equipment rack. The equipment rack controllers then link over a local area network to a central control computer. The central control computer provides an operator interface......, and runs a software application program that communicates with the equipment rack controllers. The software application program of the central control computer stores IDs of the equipment rack controllers and each of its connected electronic ID tags in a database. The software application program...

GWAMA: software for genome-wide association meta-analysis

Directory of Open Access Journals (Sweden)

Mägi Reedik

2010-05-01

Full Text Available Abstract Background Despite the recent success of genome-wide association studies in identifying novel loci contributing effects to complex human traits, such as type 2 diabetes and obesity, much of the genetic component of variation in these phenotypes remains unexplained. One way to improving power to detect further novel loci is through meta-analysis of studies from the same population, increasing the sample size over any individual study. Although statistical software analysis packages incorporate routines for meta-analysis, they are ill equipped to meet the challenges of the scale and complexity of data generated in genome-wide association studies. Results We have developed flexible, open-source software for the meta-analysis of genome-wide association studies. The software incorporates a variety of error trapping facilities, and provides a range of meta-analysis summary statistics. The software is distributed with scripts that allow simple formatting of files containing the results of each association study and generate graphical summaries of genome-wide meta-analysis results. Conclusions The GWAMA (Genome-Wide Association Meta-Analysis software has been developed to perform meta-analysis of summary statistics generated from genome-wide association studies of dichotomous phenotypes or quantitative traits. Software with source files, documentation and example data files are freely available online at http://www.well.ox.ac.uk/GWAMA.

Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

International Nuclear Information System (INIS)

2005-01-01

The Director General of the International Atomic Energy Agency has received Notes Verbales dated 25 October 2004 from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belgium, Brazil, Canada, Cyprus, Czech Republic, Estonia, Finland, France, Greece, Hungary, Italy, Japan, Malta, Netherlands, Norway, Republic of Korea, South Africa, Spain, Sweden, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology. The purpose of the Notes Verbales is to provide further information on those Governments' guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Notes Verbales is attached. The attachment to these Notes Verbales is also reproduced in full

Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-02-23

The Director General of the International Atomic Energy Agency has received Notes Verbales dated 25 October 2004 from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belgium, Brazil, Canada, Cyprus, Czech Republic, Estonia, Finland, France, Greece, Hungary, Italy, Japan, Malta, Netherlands, Norway, Republic of Korea, South Africa, Spain, Sweden, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology. The purpose of the Notes Verbales is to provide further information on those Governments' guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Notes Verbales is attached. The attachment to these Notes Verbales is also reproduced in full.

Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

International Nuclear Information System (INIS)

2003-01-01

The Director General of the International Atomic Energy Agency has received Notes Verbales dated 28 February 2003 from the Resident Representatives to the Agency of Argentina, Austria, Belgium, Bulgaria, Canada, Cyprus, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Japan, Kazakhstan, Latvia, Netherlands, Norway, Portugal, Republic of Korea, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland, and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology. The purpose of the Note Verbales is to provide further information on those Governments' Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Notes Verbales is attached. The attachment to these Notes Verbales is also reproduced in full

Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-05-16

The Director General of the International Atomic Energy Agency has received Notes Verbales dated 28 February 2003 from the Resident Representatives to the Agency of Argentina, Austria, Belgium, Bulgaria, Canada, Cyprus, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Japan, Kazakhstan, Latvia, Netherlands, Norway, Portugal, Republic of Korea, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland, and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology. The purpose of the Note Verbales is to provide further information on those Governments' Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Notes Verbales is attached. The attachment to these Notes Verbales is also reproduced in full.

Flexible distributed architecture for semiconductor process control and experimentation

Science.gov (United States)

Gower, Aaron E.; Boning, Duane S.; McIlrath, Michael B.

1997-01-01

Semiconductor fabrication requires an increasingly expensive and integrated set of tightly controlled processes, driving the need for a fabrication facility with fully computerized, networked processing equipment. We describe an integrated, open system architecture enabling distributed experimentation and process control for plasma etching. The system was developed at MIT's Microsystems Technology Laboratories and employs in-situ CCD interferometry based analysis in the sensor-feedback control of an Applied Materials Precision 5000 Plasma Etcher (AME5000). Our system supports accelerated, advanced research involving feedback control algorithms, and includes a distributed interface that utilizes the internet to make these fabrication capabilities available to remote users. The system architecture is both distributed and modular: specific implementation of any one task does not restrict the implementation of another. The low level architectural components include a host controller that communicates with the AME5000 equipment via SECS-II, and a host controller for the acquisition and analysis of the CCD sensor images. A cell controller (CC) manages communications between these equipment and sensor controllers. The CC is also responsible for process control decisions; algorithmic controllers may be integrated locally or via remote communications. Finally, a system server images connections from internet/intranet (web) based clients and uses a direct link with the CC to access the system. Each component communicates via a predefined set of TCP/IP socket based messages. This flexible architecture makes integration easier and more robust, and enables separate software components to run on the same or different computers independent of hardware or software platform.

Reliability of a computer software angle tool for measuring spine and pelvic flexibility during the sit-and-reach test.

Science.gov (United States)

Mier, Constance M; Shapiro, Belinda S

2013-02-01

The purpose of this study was to determine the reliability of a computer software angle tool that measures thoracic (T), lumbar (L), and pelvic (P) angles as a means of evaluating spine and pelvic flexibility during the sit-and-reach (SR) test. Thirty adults performed the SR twice on separate days. The SR test was captured on video and later analyzed for T, L, and P angles using the computer software angle tool. During the test, 3 markers were placed over T1, T12, and L5 vertebrae to identify T, L, and P angles. Intraclass correlation coefficient (ICC) indicated a very high internal consistency (between trials) for T, L, and P angles (0.95-0.99); thus, the average of trials was used for test-retest (between days) reliability. Mean (±SD) values did not differ between days for T (51.0 ± 14.3 vs. 52.3 ± 16.2°), L (23.9 ± 7.1 vs. 23.0 ± 6.9°), or P (98.4 ± 15.6 vs. 98.3 ± 14.7°) angles. Test-retest reliability (ICC) was high for T (0.96) and P (0.97) angles and moderate for L angle (0.84). Both intrarater and interrater reliabilities were high for T (0.95, 0.94) and P (0.97, 0.97) angles and moderate for L angle (0.87, 0.82). Thus, the computer software angle tool is a highly objective method for assessing spine and pelvic flexibility during a video-captured SR test.

Framework for Small-Scale Experiments in Software Engineering: Guidance and Control Software Project: Software Engineering Case Study

Science.gov (United States)

Hayhurst, Kelly J.

1998-01-01

Software is becoming increasingly significant in today's critical avionics systems. To achieve safe, reliable software, government regulatory agencies such as the Federal Aviation Administration (FAA) and the Department of Defense mandate the use of certain software development methods. However, little scientific evidence exists to show a correlation between software development methods and product quality. Given this lack of evidence, a series of experiments has been conducted to understand why and how software fails. The Guidance and Control Software (GCS) project is the latest in this series. The GCS project is a case study of the Requirements and Technical Concepts for Aviation RTCA/DO-178B guidelines, Software Considerations in Airborne Systems and Equipment Certification. All civil transport airframe and equipment vendors are expected to comply with these guidelines in building systems to be certified by the FAA for use in commercial aircraft. For the case study, two implementations of a guidance and control application were developed to comply with the DO-178B guidelines for Level A (critical) software. The development included the requirements, design, coding, verification, configuration management, and quality assurance processes. This paper discusses the details of the GCS project and presents the results of the case study.

A flexible object-based software framework for modeling complex systems with interacting natural and societal processes.

Energy Technology Data Exchange (ETDEWEB)

Christiansen, J. H.

2000-06-15

The Dynamic Information Architecture System (DIAS) is a flexible, extensible, object-based framework for developing and maintaining complex multidisciplinary simulations. The DIAS infrastructure makes it feasible to build and manipulate complex simulation scenarios in which many thousands of objects can interact via dozens to hundreds of concurrent dynamic processes. The flexibility and extensibility of the DIAS software infrastructure stem mainly from (1) the abstraction of object behaviors, (2) the encapsulation and formalization of model functionality, and (3) the mutability of domain object contents. DIAS simulation objects are inherently capable of highly flexible and heterogeneous spatial realizations. Geospatial graphical representation of DIAS simulation objects is addressed via the GeoViewer, an object-based GIS toolkit application developed at ANL. DIAS simulation capabilities have been extended by inclusion of societal process models generated by the Framework for Addressing Cooperative Extended Transactions (FACET), another object-based framework developed at Argonne National Laboratory. By using FACET models to implement societal behaviors of individuals and organizations within larger DIAS-based natural systems simulations, it has become possible to conveniently address a broad range of issues involving interaction and feedback among natural and societal processes. Example DIAS application areas discussed in this paper include a dynamic virtual oceanic environment, detailed simulation of clinical, physiological, and logistical aspects of health care delivery, and studies of agricultural sustainability of urban centers under environmental stress in ancient Mesopotamia.

FASTBUS software status

International Nuclear Information System (INIS)

Gustavson, D.B.

1980-10-01

Computer software will be needed in addition to the mechanical, electrical, protocol and timing specifications of the FASTBUS, in order to facilitate the use of this flexible new multiprocessor and multisegment data acquisition and processing system. Software considerations have been important in the FASTBUS design, but standard subroutines and recommended algorithms will be needed as the FASTBUS comes into use. This paper summarizes current FASTBUS software projects, goals and status

Excel2Genie: A Microsoft Excel application to improve the flexibility of the Genie-2000 Spectroscopic software

International Nuclear Information System (INIS)

Forgács, Attila; Balkay, László; Trón, Lajos; Raics, Péter

2014-01-01

Excel2Genie, a simple and user-friendly Microsoft Excel interface, has been developed to the Genie-2000 Spectroscopic Software of Canberra Industries. This Excel application can directly control Canberra Multichannel Analyzer (MCA), process the acquired data and visualize them. Combination of Genie-2000 with Excel2Genie results in remarkably increased flexibility and a possibility to carry out repetitive data acquisitions even with changing parameters and more sophisticated analysis. The developed software package comprises three worksheets: display parameters and results of data acquisition, data analysis and mathematical operations carried out on the measured gamma spectra. At the same time it also allows control of these processes. Excel2Genie is freely available to assist gamma spectrum measurements and data evaluation by the interested Canberra users. With access to the Visual Basic Application (VBA) source code of this application users are enabled to modify the developed interface according to their intentions. - Highlights: • User-friendly Microsoft Excel interface to the Genie-2000 Spectroscopic software. • Data acquisitions with changing parameters and sophisticated data analysis. • Three worksheets: data acquisition, data analysis and mathematical operations on spectra. • The source code is freely available

Silvabase: A flexible data file management system

Science.gov (United States)

Lambing, Steven J.; Reynolds, Sandra J.

1991-01-01

The need for a more flexible and efficient data file management system for mission planning in the Mission Operations Laboratory (EO) at MSFC has spawned the development of Silvabase. Silvabase is a new data file structure based on a B+ tree data structure. This data organization allows for efficient forward and backward sequential reads, random searches, and appends to existing data. It also provides random insertions and deletions with reasonable efficiency, utilization of storage space well but not at the expense of speed, and performance of these functions on a large volume of data. Mission planners required that some data be keyed and manipulated in ways not found in a commercial product. Mission planning software is currently being converted to use Silvabase in the Spacelab and Space Station Mission Planning Systems. Silvabase runs on a Digital Equipment Corporation's popular VAX/VMS computers in VAX Fortran. Silvabase has unique features involving time histories and intervals such as in operations research. Because of its flexibility and unique capabilities, Silvabase could be used in almost any government or commercial application that requires efficient reads, searches, and appends in medium to large amounts of almost any kind of data.

Maintenance and fabrication of nuclear electronic equipment

International Nuclear Information System (INIS)

Hong, Seok Boong; Chung, Chong Eun; Hwang, In Koo; Koo, In Soo; Park, Bum; Kim, Soo Hee; Lee, Seong Joo; Kim, Min Seok; Choi, Wha Lim

2011-12-01

- process equipment at PIEF, Chemical Analysis Team and RWFTF have been calibrated. - The electronic equipment and radiation equipment at RWTF and PIEF have been prepared. - Development and installation of integrated RMS software for Hanaro Cold Neutron Laboratory Building(CNLB) RMS, and development and performance upgrade of a portal monitor for CNLB. - Performance test of the Hardware/Software of digital unit controller has been performed, and functional upgrade of the Hardware/Software of stimulator for SMART MMIS performance test facility has also been performed. - A controller of high voltage power supply for a small electron beam generator and a controller for razer pinning and a remote monitoring apparatus of cathode power supply for a 0.2 Mev. small electron beam generator have been designed and fabricated. - Database construction for effective maintenance for the process equipment and radiation instruments are designed and constructed

A Software Suite for Testing SpaceWire Devices and Networks

Science.gov (United States)

Mills, Stuart; Parkes, Steve

2015-09-01

SpaceWire is a data-handling network for use on-board spacecraft, which connects together instruments, mass-memory, processors, downlink telemetry, and other on-board sub-systems. SpaceWire is simple to implement and has some specific characteristics that help it support data-handling applications in space: high-speed, low-power, simplicity, relatively low implementation cost, and architectural flexibility making it ideal for many space missions. SpaceWire provides high-speed (2 Mbits/s to 200 Mbits/s), bi-directional, full-duplex data-links, which connect together SpaceWire enabled equipment. Data-handling networks can be built to suit particular applications using point-to-point data-links and routing switches. STAR-Dundee’s STAR-System software stack has been designed to meet the needs of engineers designing and developing SpaceWire networks and devices. This paper describes the aims of the software and how those needs were met.

Excel2Genie: A Microsoft Excel application to improve the flexibility of the Genie-2000 Spectroscopic software.

Science.gov (United States)

Forgács, Attila; Balkay, László; Trón, Lajos; Raics, Péter

2014-12-01

Excel2Genie, a simple and user-friendly Microsoft Excel interface, has been developed to the Genie-2000 Spectroscopic Software of Canberra Industries. This Excel application can directly control Canberra Multichannel Analyzer (MCA), process the acquired data and visualize them. Combination of Genie-2000 with Excel2Genie results in remarkably increased flexibility and a possibility to carry out repetitive data acquisitions even with changing parameters and more sophisticated analysis. The developed software package comprises three worksheets: display parameters and results of data acquisition, data analysis and mathematical operations carried out on the measured gamma spectra. At the same time it also allows control of these processes. Excel2Genie is freely available to assist gamma spectrum measurements and data evaluation by the interested Canberra users. With access to the Visual Basic Application (VBA) source code of this application users are enabled to modify the developed interface according to their intentions. Copyright © 2014 Elsevier Ltd. All rights reserved.

Pragmatic Software Innovation

DEFF Research Database (Denmark)

Aaen, Ivan; Jensen, Rikke Hagensby

2014-01-01

We understand software innovation as concerned with introducing innovation into the development of software intensive systems, i.e. systems in which software development and/or integration are dominant considerations. Innovation is key in almost any strategy for competitiveness in existing markets......, for creating new markets, or for curbing rising public expenses, and software intensive systems are core elements in most such strategies. Software innovation therefore is vital for about every sector of the economy. Changes in software technologies over the last decades have opened up for experimentation......, learning, and flexibility in ongoing software projects, but how can this change be used to facilitate software innovation? How can a team systematically identify and pursue opportunities to create added value in ongoing projects? In this paper, we describe Deweyan pragmatism as the philosophical foundation...

A flexible software architecture for tokamak discharge control systems

International Nuclear Information System (INIS)

Ferron, J.R.; Penaflor, B.; Walker, M.L.; Moller, J.; Butner, D.

1995-01-01

The software structure of the plasma control system in use on the DIII-D tokamak experiment is described. This system implements control functions through software executing in real time on one or more digital computers. The software is organized into a hierarchy that allows new control functions needed to support the DIII-D experimental program to be added easily without affecting previously implemented functions. This also allows the software to be portable in order to create control systems for other applications. The tokamak operator uses an X-windows based interface to specify the time evolution of a tokamak discharge. The interface provides a high level view for the operator that reduces the need for detailed knowledge of the control system operation. There is provision for an asynchronous change to an alternate discharge time evolution in response to an event that is detected in real time. Quality control is enhanced through off-line testing that can make use of software-based tokamak simulators

IAEA preparations for the year 2000 compliance of safeguards equipment systems

International Nuclear Information System (INIS)

Aparo, M.; Barnes, B.; Lewis, W.; Hsiung, Sue

1999-01-01

The Department of Safeguards, IAEA, has used equipment systems for acquiring relevant data to support safeguards evaluation and verification activities. Typically an equipment system consists of EPROM (embedded system), a connecting personal computer with instrument software for data acquisition, and may include data evaluation software. Complementing the equipment systems is a collection of general evaluation software systems (application software) which support the analysis of the acquired data. In preparing for the year 2000 compliance of all safeguards systems, SGTS (Safeguards Division of Technical Services) in IAEA, must ascertain the equipment systems and the evaluation software authorised for inspection use can properly operate through the passage of year 2000. We present the year 2000 challenge for these systems, the approach we use to tackle the problem, and the status of our year 2000 project. (author)

Flexible Adaptation in Cognitive Radios

CERN Document Server

Li, Shujun

2013-01-01

This book provides an introduction to software-defined radio and cognitive radio, along with methodologies for applying knowledge representation, semantic web, logic reasoning and artificial intelligence to cognitive radio, enabling autonomous adaptation and flexible signaling. Readers from the wireless communications and software-defined radio communities will use this book as a reference to extend software-defined radio to cognitive radio, using the semantic technology described. Readers with a background in semantic web and artificial intelligence will find in this book the application of semantic web and artificial intelligence technologies to wireless communications. For readers in networks and network management, this book presents a new approach to enable interoperability, collaborative optimization and flexible adaptation of network components. Provides a comprehensive ontology covering the core concepts of wireless communications using a formal language; Presents the technical realization of using a ...

Specialization and Flexibility in Port Cargo Handling

Directory of Open Access Journals (Sweden)

Hakkı KİŞİ

2016-11-01

Full Text Available Cargo handling appears to be the fundamental function of ports. In this context, the question of type of equipment and capacity rate need to be tackled with respect to cargo handling principles. The purpose of this study is to discuss the types of equipment to be used in ports, relating the matter to costs and capacity. The question is studied with a basic economic theoretical approach. Various conditions like port location, size, resources, cargo traffic, ships, etc. are given parameters to dictate the type and specification of the cargo handling equipment. Besides, a simple approach in the context of cost capacity relation can be useful in deciding whether to use specialized or flexible equipment. Port equipment is sometimes expected to be flexible to handle various types of cargo as many as possible and sometimes to be specialized to handle one specific type of cargo. The cases that might be suitable for those alternatives are discussed from an economic point of view in this article. Consequently, effectiveness and efficiency criteria play important roles in determining the handling equipment in ports.

Hardware and software improvements to a low-cost horizontal parallax holographic video monitor.

Science.gov (United States)

Henrie, Andrew; Codling, Jesse R; Gneiting, Scott; Christensen, Justin B; Awerkamp, Parker; Burdette, Mark J; Smalley, Daniel E

2018-01-01

Displays capable of true holographic video have been prohibitively expensive and difficult to build. With this paper, we present a suite of modularized hardware components and software tools needed to build a HoloMonitor with basic "hacker-space" equipment, highlighting improvements that have enabled the total materials cost to fall to $820, well below that of other holographic displays. It is our hope that the current level of simplicity, development, design flexibility, and documentation will enable the lay engineer, programmer, and scientist to relatively easily replicate, modify, and build upon our designs, bringing true holographic video to the masses.

IMAGE information monitoring and applied graphics software environment. Volume 2. Software description

International Nuclear Information System (INIS)

Hallam, J.W.; Ng, K.B.; Upham, G.L.

1986-09-01

The EPRI Information Monitoring and Applied Graphics Environment (IMAGE) system is designed for 'fast proto-typing' of advanced concepts for computer-aided plant operations tools. It is a flexible software system which can be used for rapidly creating, dynamically driving and evaluating advanced operator aid displays. The software is written to be both host computer and graphic device independent

R D software quality assurance

Energy Technology Data Exchange (ETDEWEB)

Hood, F.C.

1991-10-01

Research software quality assurance (QA) requirements must be adequate to strengthen development or modification objectives, but flexible enough not to restrict creativity. Application guidelines are needed for the different kinds of research and development (R D) software activities to assure project objectives are achieved.

THE FLEXIBILITY-AUTOMATION CORRESPONDENCE TO A VIRTUAL COMMERCIAL SOCIETY

Directory of Open Access Journals (Sweden)

Liliana Doble

2012-01-01

Full Text Available Design and operation of FMS is based on system requirement can be as productive and flexible as necessary, i.e. obtaining controlled correspondence between the degree of flexibility and automation of system.The flexibility of a FMS (Flexible Manufacturing Systems is determined by two important criteria: Flexible hardware structure of the system; Flexible software structure. Flexible hardware structure of the CS system (calculation system is determined to its turn according to three components: Flexibility of technological subsystem; Flexibility subsystem of storage, transport and handling;Flexibility of informational subsystem.

Trunk Flexibility Improvement in Response to Powered Assisted Exercise

Directory of Open Access Journals (Sweden)

B.S. Bains

2016-07-01

Full Text Available Background study: Flexibility in human spine has always plays an important role in dexterity and seamless ambulatory activities. When optimum range is not maintained by the trunk column, due to lack of flexibility, the posture gets affected resulting in reduce trunk rotation flexibility and mobility hence loss of complete trunk rotation. Objective: The purpose of this study is to determine the effect of Shapemaster Power Assisted Exercise Equipment (SPAEE on trunk flexibility. Methodology: Twenty healthy individual ages between 40 to 60 years were randomly divided into control and exercise groups. Shapemaster exercise program performed two times per week for 5 weeks and 45 minutes per session. Before and after 10 sessions of Shapemaster exercise protocol, Seated trunk rotation test was used to measure trunk flexibility. Results: Repeated measurement ANOVA were used to analysis data between groups. The results of this study illustrated that after 10th sessions trunk flexibility significantly improved (F (1.0, 18 = 11.732, p < 0.003. Conclusion: In conclusion results were determined that SPAEE is safe and it did effectively enhance flexibility among individual healthy adults. Keyword: Shapemaster Power Assisted Exercise Equipment (SPAEE, Trunk Flexibility, Healthy individual

Software Defined Networking (SDN) controlled all optical switching networks with multi-dimensional switching architecture

Science.gov (United States)

Zhao, Yongli; Ji, Yuefeng; Zhang, Jie; Li, Hui; Xiong, Qianjin; Qiu, Shaofeng

2014-08-01

Ultrahigh throughout capacity requirement is challenging the current optical switching nodes with the fast development of data center networks. Pbit/s level all optical switching networks need to be deployed soon, which will cause the high complexity of node architecture. How to control the future network and node equipment together will become a new problem. An enhanced Software Defined Networking (eSDN) control architecture is proposed in the paper, which consists of Provider NOX (P-NOX) and Node NOX (N-NOX). With the cooperation of P-NOX and N-NOX, the flexible control of the entire network can be achieved. All optical switching network testbed has been experimentally demonstrated with efficient control of enhanced Software Defined Networking (eSDN). Pbit/s level all optical switching nodes in the testbed are implemented based on multi-dimensional switching architecture, i.e. multi-level and multi-planar. Due to the space and cost limitation, each optical switching node is only equipped with four input line boxes and four output line boxes respectively. Experimental results are given to verify the performance of our proposed control and switching architecture.

Software-defined optical network for metro-scale geographically distributed data centers.

Science.gov (United States)

Samadi, Payman; Wen, Ke; Xu, Junjie; Bergman, Keren

2016-05-30

The emergence of cloud computing and big data has rapidly increased the deployment of small and mid-sized data centers. Enterprises and cloud providers require an agile network among these data centers to empower application reliability and flexible scalability. We present a software-defined inter data center network to enable on-demand scale out of data centers on a metro-scale optical network. The architecture consists of a combined space/wavelength switching platform and a Software-Defined Networking (SDN) control plane equipped with a wavelength and routing assignment module. It enables establishing transparent and bandwidth-selective connections from L2/L3 switches, on-demand. The architecture is evaluated in a testbed consisting of 3 data centers, 5-25 km apart. We successfully demonstrated end-to-end bulk data transfer and Virtual Machine (VM) migrations across data centers with less than 100 ms connection setup time and close to full link capacity utilization.

Data Center Equipment Location and Monitoring System

DEFF Research Database (Denmark)

2013-01-01

Abstract: Data center equipment location systems include hardware and software to provide information on the location, monitoring, and security of servers and other equipment in equipment racks. The systems provide a wired alternative to the wireless RFID tag system by using electronic ID tags...... connected to each piece of equipment, each electronic ID tag connected directly by wires to an equipment rack controller on the equipment rack. The equipment rack controllers link to a central control computer that provides an operator ...

Software Innovation - Values for a Methodology

DEFF Research Database (Denmark)

Aaen, Ivan

2013-01-01

Innovation is a recurrent theme in public as well as academic debate, and software development plays a major role for innovation in about every sector of our economy. As a consequence, software innovation will play an increasingly important role in software development. The focus in this paper is...... for experimentation, learning, and flexibility in software projects, but how can this change be used to facilitate software innovation? This paper proposes a set of values to guide the development of a methodology to facilitate software innovation....

Software Development Process Changes in the Telecommunications Industry

Directory of Open Access Journals (Sweden)

John Kevin Doyle

2006-06-01

Full Text Available The tremendous changes in the telecommunications business in the last several years drove changes in the software development processes of telecommunications equipment providers. We compare changes in these very large projects, in two companies, with those proposed in the Theory of Constraints / Critical Chains, Extreme Programming, and Agile development models. The 2000s have been a time of significant challenge in the telecommunications equipment business. Telecommunications service providers have excess equipment capacity. Many are waiting for next generation telephone switches that will simultaneously lower operating costs and enable additional revenue generation. The large service providers have drastically reduced their capital and expense purchases. Many small service providers, particularly the dot-coms, went bankrupt; much of their equipment is on the secondary market, at a fraction of the original cost. Thus the equipment market has significantly shrunk, and the equipment providers have been reducing expenses, while continuing to deliver software and hardware equipment at the high quality level required by the service providers. This drove many changes in the software development process. While the process changes are reported in two telecommunication equipment development organizations, the changes are applicable in any product development organization.

SpaceCube Core Software

Data.gov (United States)

National Aeronautics and Space Administration — Develop a flexible, modular and user friendly SpaceCube Core Software system that will dramatically simplify SpaceCube application development and enable any...

Software Defined Networking Demands on Software Technologies

DEFF Research Database (Denmark)

Galinac Grbac, T.; Caba, Cosmin Marius; Soler, José

2015-01-01

Software Defined Networking (SDN) is a networking approach based on a centralized control plane architecture with standardised interfaces between control and data planes. SDN enables fast configuration and reconfiguration of the network to enhance resource utilization and service performances....... This new approach enables a more dynamic and flexible network, which may adapt to user needs and application requirements. To this end, systemized solutions must be implemented in network software, aiming to provide secure network services that meet the required service performance levels. In this paper......, we review this new approach to networking from an architectural point of view, and identify and discuss some critical quality issues that require new developments in software technologies. These issues we discuss along with use case scenarios. Here in this paper we aim to identify challenges...

40 CFR 1065.910 - PEMS auxiliary equipment for field testing.

Science.gov (United States)

2010-07-01

..., you may route engine intake air or exhaust through a flow meter. Route the engine intake air or exhaust as follows: (1) Flexible connections. Use short flexible connectors where necessary. (i) You may use flexible connectors to enlarge or reduce the pipe diameters to match that of your test equipment...

A software package for biomedical image processing and analysis

International Nuclear Information System (INIS)

Goncalves, J.G.M.; Mealha, O.

1988-01-01

The decreasing cost of computing power and the introduction of low cost imaging boards justifies the increasing number of applications of digital image processing techniques in the area of biomedicine. There is however a large software gap to be fulfilled, between the application and the equipment. The requirements to bridge this gap are twofold: good knowledge of the hardware provided and its interface to the host computer, and expertise in digital image processing and analysis techniques. A software package incorporating these two requirements was developed using the C programming language, in order to create a user friendly image processing programming environment. The software package can be considered in two different ways: as a data structure adapted to image processing and analysis, which acts as the backbone and the standard of communication for all the software; and as a set of routines implementing the basic algorithms used in image processing and analysis. Hardware dependency is restricted to a single module upon which all hardware calls are based. The data structure that was built has four main features: hierchical, open, object oriented, and object dependent dimensions. Considering the vast amount of memory needed by imaging applications and the memory available in small imaging systems, an effective image memory management scheme was implemented. This software package is being used for more than one and a half years by users with different applications. It proved to be an excellent tool for helping people to get adapted into the system, and for standardizing and exchanging software, yet preserving flexibility allowing for users' specific implementations. The philosophy of the software package is discussed and the data structure that was built is described in detail

Experimental research control software system

International Nuclear Information System (INIS)

Cohn, I A; Kovalenko, A G; Vystavkin, A N

2014-01-01

A software system, intended for automation of a small scale research, has been developed. The software allows one to control equipment, acquire and process data by means of simple scripts. The main purpose of that development is to increase experiment automation easiness, thus significantly reducing experimental setup automation efforts. In particular, minimal programming skills are required and supervisors have no reviewing troubles. Interactions between scripts and equipment are managed automatically, thus allowing to run multiple scripts simultaneously. Unlike well-known data acquisition commercial software systems, the control is performed by an imperative scripting language. This approach eases complex control and data acquisition algorithms implementation. A modular interface library performs interaction with external interfaces. While most widely used interfaces are already implemented, a simple framework is developed for fast implementations of new software and hardware interfaces. While the software is in continuous development with new features being implemented, it is already used in our laboratory for automation of a helium-3 cryostat control and data acquisition. The software is open source and distributed under Gnu Public License.

Experimental research control software system

Science.gov (United States)

Cohn, I. A.; Kovalenko, A. G.; Vystavkin, A. N.

2014-05-01

A software system, intended for automation of a small scale research, has been developed. The software allows one to control equipment, acquire and process data by means of simple scripts. The main purpose of that development is to increase experiment automation easiness, thus significantly reducing experimental setup automation efforts. In particular, minimal programming skills are required and supervisors have no reviewing troubles. Interactions between scripts and equipment are managed automatically, thus allowing to run multiple scripts simultaneously. Unlike well-known data acquisition commercial software systems, the control is performed by an imperative scripting language. This approach eases complex control and data acquisition algorithms implementation. A modular interface library performs interaction with external interfaces. While most widely used interfaces are already implemented, a simple framework is developed for fast implementations of new software and hardware interfaces. While the software is in continuous development with new features being implemented, it is already used in our laboratory for automation of a helium-3 cryostat control and data acquisition. The software is open source and distributed under Gnu Public License.

The economics of information systems and software

CERN Document Server

Veryard, Richard

2014-01-01

The Economics of Information Systems and Software focuses on the economic aspects of information systems and software, including advertising, evaluation of information systems, and software maintenance. The book first elaborates on value and values, software business, and scientific information as an economic category. Discussions focus on information products and information services, special economic properties of information, culture and convergence, hardware and software products, materiality and consumption, technological progress, and software flexibility. The text then takes a look at a

Radio monitoring problems, methods, and equipment

CERN Document Server

Rembovsky, Anatoly; Kozmin, Vladimir; Smolskiy, Sergey

2009-01-01

Offers a unified approach to fundamental aspects of Automated Radio Monitoring (ARM). This book discusses the development, modeling, design, and manufacture of ARM systems. It provides classification and descriptions of modern high-efficient hardware-software ARM equipment, including the equipment for detection and radio direction-finding.

Flexible eddy current coil arrays

International Nuclear Information System (INIS)

Krampfner, Y.; Johnson, D.P.

1987-01-01

A novel approach was devised to overcome certain limitations of conventional eddy current testing. The typical single-element hand-wound probe was replaced with a two dimensional array of spirally wound probe elements deposited on a thin, flexible polyimide substrate. This provides full and reliable coverage of the test area and eliminates the need for scanning. The flexible substrate construction of the array allows the probes to conform to irregular part geometries, such as turbine blades and tubing, thereby eliminating the need for specialized probes for each geometry. Additionally, the batch manufacturing process of the array can yield highly uniform and reproducible coil geometries. The array is driven by a portable computer-based eddy current instrument, smartEDDY/sup TM/, capable of two-frequency operation, and offers a great deal of versatility and flexibility due to its software-based architecture. The array is coupled to the instrument via an 80-switch multiplexer that can be configured to address up to 1600 probes. The individual array elements may be addressed in any desired sequence, as defined by the software

Software application for a total management of a radioactive facility

International Nuclear Information System (INIS)

Mirpuri, E.; Escudero, R.; Macias, M.T.; Perez, J.; Sanchez, A.; Usera, F.

2008-01-01

The use of radiological material and/or equipment that generate ionizing radiation is widely extended in biological research. In every laboratory there are a large variety of methods, operations, techniques, equipment, radioisotopes and users related to the work with ionizing radiation. In order to control the radioactive material, users and the whole facility a large number of documents, databases and information is necessary to be created by the manager of the Radioactivity Facility. This kind of information is characterized by a constant and persistent manipulation and includes information of great importance such as the general management of the radioactive material and waste management, exposed workers vigilance, controlled areas access, laboratory and equipment reservations, radiological inspections, etc. These activities are often complicated by the fact that the main manager of the radioactive facility is also in charge of bio-safety and working prevention issues so the documents to generate and manipulate and the procedures to develop are multiplied. A procedure to access and manage all these files is highly recommended in order to optimize the general management of the facility, avoiding loss of information, automating all the activities and allowing data necessary for control easily accessible. In this work we present a software application for a total management of the facility. This software has been developed by the collaboration of six of the most important research centers from Spain in coordination with the company 'Appize soluciones'. This is a flexible and versatile application that adapts to any specific need of every research center, providing the appropriate reports and checklist that speed up to general management and increase the ease of writing the official documents, including the Operations Book. (author)

[Flexible ENT endoscopy--video technic].

Science.gov (United States)

Rasinger, G A; Horak, F

1985-02-01

This study discusses the solutions to the problem of documenting moving processes in the field of otolaryngology. A flexible bronchoscope and video equipment connected to it are presented as a specific solution of the problem, with ample of observations. A technical comparison is used as the basis for a discussion of the pros and cons of the video and film techniques. A successful arrangement of examination facilities illustrates the future of flexible-endoscope techniques in the field of otolaryngology.

Experimental demonstration of an OpenFlow based software-defined optical network employing packet, fixed and flexible DWDM grid technologies on an international multi-domain testbed.

Science.gov (United States)

Channegowda, M; Nejabati, R; Rashidi Fard, M; Peng, S; Amaya, N; Zervas, G; Simeonidou, D; Vilalta, R; Casellas, R; Martínez, R; Muñoz, R; Liu, L; Tsuritani, T; Morita, I; Autenrieth, A; Elbers, J P; Kostecki, P; Kaczmarek, P

2013-03-11

Software defined networking (SDN) and flexible grid optical transport technology are two key technologies that allow network operators to customize their infrastructure based on application requirements and therefore minimizing the extra capital and operational costs required for hosting new applications. In this paper, for the first time we report on design, implementation & demonstration of a novel OpenFlow based SDN unified control plane allowing seamless operation across heterogeneous state-of-the-art optical and packet transport domains. We verify and experimentally evaluate OpenFlow protocol extensions for flexible DWDM grid transport technology along with its integration with fixed DWDM grid and layer-2 packet switching.

Qualified software development methodologies for nuclear class 1E equipment

International Nuclear Information System (INIS)

Koch, Shlomo; Ruether, J.

1992-01-01

This article describes the experience learned at Northern States Power and Spectrum Technologies, during the development of a computer based Safeguard Load Sequencer, for Prairie Island Nuclear Generating Plant. The Safeguard Load Sequencer (SLS) performs the function of 4kV emergency bus voltage restoration, load shedding, and emergency diesel generator loading. The system is designed around an Allen-Bradley PLC-5 programmable controller. The Safeguard Load Sequencer is the vehicle to demonstrate the software engineering procedures and methodologies. The article analyzes the requirements imposed by the NUREG 4640 handbook, and the relevant IEEE standards. The article tries to answer the question what is software engineering, and describe the waterfall life cycle phases of software development. The effects of each phase on software quality and V and V plan is described. Issues designing a V and V plan is addressed, and considerations of cost and time to implement the program are described. The article also addresses the subject of tools that can increase productivity and reduce the cost and time of an extensive V and V plan. It describes the tools the authors used, and more importantly presents a wish list of tools that they as developers would like to have. The role of testing is presented. They show that testing at the final stage has a lower impact on software quality then generally assumed. Full coverage of testing is almost always impossible, and they demonstrate how alternative audits and test during the development phase can improve software reliability

Qualification test for the Flexible Receiver. Revision 1

International Nuclear Information System (INIS)

Keller, C.M.

1994-01-01

This document provides the test plan and procedures to certify and design verify the 42 in. and 4 in. -- 6 in. Flexible Receiver as a safety class 3 system. The Flexible Receiver will be used by projects W-151 and W-320 for removing equipment from tanks C-106 and Az-101

Automated software configuration in the MONSOON system

Science.gov (United States)

Daly, Philip N.; Buchholz, Nick C.; Moore, Peter C.

2004-09-01

MONSOON is the next generation OUV-IR controller project being developed at NOAO. The design is flexible, emphasizing code re-use, maintainability and scalability as key factors. The software needs to support widely divergent detector systems ranging from multi-chip mosaics (for LSST, QUOTA, ODI and NEWFIRM) down to large single or multi-detector laboratory development systems. In order for this flexibility to be effective and safe, the software must be able to configure itself to the requirements of the attached detector system at startup. The basic building block of all MONSOON systems is the PAN-DHE pair which make up a single data acquisition node. In this paper we discuss the software solutions used in the automatic PAN configuration system.

Software Engineering Principles for Courseware Development.

Science.gov (United States)

Magel, Kenneth

1980-01-01

Courseware (computer based curriculum materials) development should follow the lessons learned by software engineers. The most important of 28 principles of software development presented here include a stress on human readability, the importance of early planning and analysis, the need for independent evaluation, and the need to be flexible.…

Process mining application in software process assessment

NARCIS (Netherlands)

Samalikova, J.

2012-01-01

Nowadays, our daily life heavily depends on software. Software is everywhere, from appliances in our homes, to safety-critical systems such as medical equipment. The failure of these software-intensive systems results in high financial losses, environmental or property damages, or even loss of life.

Qualification test for the flexible receiver. Revision 2

Energy Technology Data Exchange (ETDEWEB)

Tedeschi, D.J.

1994-12-12

This document provides the test plan and procedures to certify and design verify the 42{double_prime} and 4{double_prime}-6{double_prime} Flexible Receiver as a safety class 3 system. The Flexible Receiver will be used by projects W-151 and W-320 for removing equipment from tanks C-106 and AZ-101.

Qualification test for the flexible receiver. Revision 2

International Nuclear Information System (INIS)

Tedeschi, D.J.

1994-01-01

This document provides the test plan and procedures to certify and design verify the 42 double-prime and 4 double-prime-6 double-prime Flexible Receiver as a safety class 3 system. The Flexible Receiver will be used by projects W-151 and W-320 for removing equipment from tanks C-106 and AZ-101

Flexibility of Bricard's linkages and other structures via resultants and computer algebra.

Science.gov (United States)

Lewis, Robert H; Coutsias, Evangelos A

2016-07-01

Flexibility of structures is extremely important for chemistry and robotics. Following our earlier work, we study flexibility using polynomial equations, resultants, and a symbolic algorithm of our creation that analyzes the resultant. We show that the software solves a classic arrangement of quadrilaterals in the plane due to Bricard. We fill in several gaps in Bricard's work and discover new flexible arrangements that he was apparently unaware of. This provides strong evidence for the maturity of the software, and is a wonderful example of mathematical discovery via computer assisted experiment.

Computer Center: Software Review.

Science.gov (United States)

Duhrkopf, Richard, Ed.; Belshe, John F., Ed.

1988-01-01

Reviews a software package, "Mitosis-Meiosis," available for Apple II or IBM computers with colorgraphics capabilities. Describes the documentation, presentation and flexibility of the program. Rates the program based on graphics and usability in a biology classroom. (CW)

Using neural networks in software repositories

Science.gov (United States)

Eichmann, David (Editor); Srinivas, Kankanahalli; Boetticher, G.

1992-01-01

The first topic is an exploration of the use of neural network techniques to improve the effectiveness of retrieval in software repositories. The second topic relates to a series of experiments conducted to evaluate the feasibility of using adaptive neural networks as a means of deriving (or more specifically, learning) measures on software. Taken together, these two efforts illuminate a very promising mechanism supporting software infrastructures - one based upon a flexible and responsive technology.

Application of flexible scope in large testing laboratories

Directory of Open Access Journals (Sweden)

Carina Di Candia

2011-04-01

Full Text Available According as the international definition of Flexible Scope, a laboratory must demonstrate face with the accreditation body that it has the knowledge, experience and competence to work within the full range of its flexible scope, as well as possessing suitable laboratory environments and equipment. The laboratory must also demonstrate that it has a management system in place that can control its proposed approach while continuing to comply with the requirements of ISO 17025:2005. In case of UKAS (Unites Kingdom Accreditation Service, prior to offering accreditation for flexible scope they must have a high degree of confidence that the staff are technically competent and that the management system controlling certain key processes as development, review, validation and authorization.LATU apply these requirements since 2004 as "Unified Tests". Until this date, LATU was doing the same type of tests in different materials departments using different equipment, personal, and testing quality control. In order to that were defined cross disciplinary groups to analyze this topic approaching in personal competence and quality control tests improvement, and resource's decrease. For example, LATU has the Unified Test Tensile Strength accredited by UKAS in: corrugated and solid fiberboard, paper board, linerboard, cork plugs, plastic bags, plastic sheeting, paper, woven fabrics, plastic woven bags and woven plastic. As a result of the Unified Tests was generated a general unified manage procedure with unified criteria's, responsibilities and actions. Was written a unique testing procedure not only with the actual flexible scope and the flexibilities limits but also the compliance requirements of ISO 17025 and the accreditations body methodology. We could decrease the amount of documentation to control. Was defined the methodology and implemented periodicaly internal inter comparisons between departments in order to valid the unified tests and has a unique

Communication Received from the PermanentMission of Mexico to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-06-19

The Director General has received a note verbale dated 15 June 2012 from the Permanent Mission of Mexico to the International Atomic Energy Agency providing information on the decision of the Government of Mexico to act in accordance with the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2.

Communication Received from the Permanent Mission of Mexico to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-06-19

The Director General has received a note verbale dated 15 June 2012 from the Permanent Mission of Mexico to the International Atomic Energy Agency providing information on the decision of the Government of Mexico to act in accordance with the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2.

Communication Received from the Permanent Mission of Mexico to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2012-01-01

The Director General has received a note verbale dated 15 June 2012 from the Permanent Mission of Mexico to the International Atomic Energy Agency providing information on the decision of the Government of Mexico to act in accordance with the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2

Communication Received from the PermanentMission of Mexico to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2012-01-01

The Director General has received a note verbale dated 15 June 2012 from the Permanent Mission of Mexico to the International Atomic Energy Agency providing information on the decision of the Government of Mexico to act in accordance with the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2

Agile software development

CERN Document Server

Stober, Thomas

2009-01-01

Software Development is moving towards a more agile and more flexible approach. It turns out that the traditional 'waterfall' model is not supportive in an environment where technical, financial and strategic constraints are changing almost every day. But what is agility? What are today's major approaches? And especially: What is the impact of agile development principles on the development teams, on project management and on software architects? How can large enterprises become more agile and improve their business processes, which have been existing since many, many years? What are the limit

47 CFR 2.925 - Identification of equipment.

Science.gov (United States)

2010-10-01

... common enclosure, but constructed on separate sub-units or circuit boards with independent frequency... grant of equipment authorization. (e) A software defined radio may be equipped with a means such as a... implanted within the body of a test animal or person would probably require an alternate method of...

Modular Software-Defined Radio

Directory of Open Access Journals (Sweden)

Rhiemeier Arnd-Ragnar

2005-01-01

Full Text Available In view of the technical and commercial boundary conditions for software-defined radio (SDR, it is suggestive to reconsider the concept anew from an unconventional point of view. The organizational principles of signal processing (rather than the signal processing algorithms themselves are the main focus of this work on modular software-defined radio. Modularity and flexibility are just two key characteristics of the SDR environment which extend smoothly into the modeling of hardware and software. In particular, the proposed model of signal processing software includes irregular, connected, directed, acyclic graphs with random node weights and random edges. Several approaches for mapping such software to a given hardware are discussed. Taking into account previous findings as well as new results from system simulations presented here, the paper finally concludes with the utility of pipelining as a general design guideline for modular software-defined radio.

A flexible WLAN receiver

NARCIS (Netherlands)

Schiphorst, Roelof; Hoeksema, F.W.; Slump, Cornelis H.

2003-01-01

Flexible radio receivers are also called Software Defined Radios (SDRs) [1], [2]. The focus of our SDR project [3] is on designing the front end, from antenna to demodulation in bits, of a °exible, multi-standard WLAN receiver. We try to combine an instance of a (G)FSK receiver (Bluetooth) with an

A flexible and testable software architecture: applying presenter first to a device server for the DOOCS accelerator control system of the European XFEL

International Nuclear Information System (INIS)

Beckmann, A.; Karabekyan, S.; Pflüger, J.

2012-01-01

Presenter First (PF) uses a variant of Model View Presenter design pattern to add implementation flexibility and to improve testability of complex event-driven applications. It has been introduced in the context of GUI applications, but can easily be adapted to server applications. This paper describes how Presenter First methodology is used to develop a device server for the Programmable Logic Controls (PLC) of the European XFEL undulator systems, which are Windows PCs running PLC software from Beckhoff. The server implements a ZeroMQ message interface to the PLC allowing the DOOCS accelerator control system of the European XFEL to exchange data with the PLC by sending messages over the network. Our challenge is to develop a well-tested device server with a flexible architecture that allows integrating the server into other accelerator control systems like EPICS. (author)

Systematic Software Development

DEFF Research Database (Denmark)

Kuhrmann, Marco; Méndez Fernández, Daniel

2015-01-01

The speed of innovation and the global allocation of resources to accelerate development or to reduce cost put pressure on the software industry. In the global competition, especially so-called high-price countries have to present arguments why the higher development cost is justified and what...... makes these countries an attractive host for software companies. Often, high-quality engineering and excellent quality of products, e.g., machinery and equipment, are mentioned. Yet, the question is: Can such arguments be also found for the software industry? We aim at investigating the degree...... of professionalism and systematization of software development to draw a map of strengths and weaknesses. To this end, we conducted as a first step an exploratory survey in Germany, presented in this paper. In this survey, we focused on the perceived importance of the two general software engineering process areas...

Development of E-learning Software Based Multiplatform Components

OpenAIRE

Salamah, Irma; Ganiardi, M. Aris

2017-01-01

E-learning software is a product of information and communication technology used to help dynamic and flexible learning process between teacher and student. The software technology was first used in the development of e-learning software in the form of web applications. The advantages of this technology because of the ease in the development, installation, and distribution of data. Along with advances in mobile/wireless electronics technology, e-learning software is adapted to this technology...

Comparative analysis on flexibility requirements of typical Cryogenic Transfer lines

Science.gov (United States)

Jadon, Mohit; Kumar, Uday; Choukekar, Ketan; Shah, Nitin; Sarkar, Biswanath

2017-04-01

The cryogenic systems and their applications; primarily in large Fusion devices, utilize multiple cryogen transfer lines of various sizes and complexities to transfer cryogenic fluids from plant to the various user/ applications. These transfer lines are composed of various critical sections i.e. tee section, elbows, flexible components etc. The mechanical sustainability (under failure circumstances) of these transfer lines are primary requirement for safe operation of the system and applications. The transfer lines need to be designed for multiple design constraints conditions like line layout, support locations and space restrictions. The transfer lines are subjected to single load and multiple load combinations, such as operational loads, seismic loads, leak in insulation vacuum loads etc. [1]. The analytical calculations and flexibility analysis using professional software are performed for the typical transfer lines without any flexible component, the results were analysed for functional and mechanical load conditions. The failure modes were identified along the critical sections. The same transfer line was then refurbished with the flexible components and analysed for failure modes. The flexible components provide additional flexibility to the transfer line system and make it safe. The results obtained from the analytical calculations were compared with those obtained from the flexibility analysis software calculations. The optimization of the flexible component’s size and selection was performed and components were selected to meet the design requirements as per code.

WLS software for the Los Alamos geophysical instrumentation truck

International Nuclear Information System (INIS)

Ideker, C.D.; LaDelfe, C.M.

1985-01-01

Los Alamos National Laboratory's capabilities for special downhole geophysical well logging has increased steadily over the past few years. Software was developed originally for each individual tool as it became operational. With little or no standardization for tool software modules, software development became redundant, time consuming, and cost ineffective. With long-term use and the rapid evolution of well logging capacity in mind. Los Alamos and EG and G personnel decided to purchase a software system. The system was designed to offer: wide-range use and programming flexibility; standardization subroutines for tool module development; user friendly operation which would reduce training time; operator error checking and alarm activation; maximum growth capacity for new tools as they are added to the inventory; and the ability to incorporate changes made to the computer operating system and hardware. The end result is a sophisticated and flexible software tool and for transferring downhole geophysical measurement data to computer disk files. This paper outlines the need, design, development, and implementation of the WLS software for geophysical data acquisition. A demonstration and working examples are included in the presentation

Flexible Query Answering Systems 2006

DEFF Research Database (Denmark)

-computer interaction. The overall theme of the FQAS conferences is innovative query systems aimed at providing easy, flexible, and intuitive access to information. Such systems are intended to facilitate retrieval from information repositories such as databases, libraries, and the World-Wide Web. These repositories......This volume constitutes the proceedings of the Seventh International Conference on Flexible Query Answering Systems, FQAS 2006, held in Milan, Italy, on June 7--10, 2006. FQAS is the premier conference for researchers and practitioners concerned with the vital task of providing easy, flexible...... are typically equipped with standard query systems which are often inadequate, and the focus of FQAS is the development of query systems that are more expressive, informative, cooperative, and productive. These proceedings contain contributions from invited speakers and 53 original papers out of about 100...

Assessing the economic feasibility of flexible integrated gasification Co-generation facilities

NARCIS (Netherlands)

Meerman, J.C.; Ramírez Ramírez, C.A.; Turkenburg, W.C.; Faaij, A.P.C.

2011-01-01

This paper evaluated the economic effects of introducing flexibility to state-of-the-art integrated gasification co-generation (IGCG) facilities equipped with CO2 capture. In a previous paper the technical and energetic performances of these flexible IG-CG facilities were evaluated. This paper

Study on Earthquake Response of High Voltage Electrical Equipment Coupling System with Flexible Busbar

Science.gov (United States)

Liu, Chuncheng; Qu, Da; Wang, Chongyang; Lv, Chunlei; Li, Guoqiang

2017-12-01

With the rapid development of technology and society, all walks of life in China are becoming more and more dependent on power systems. When earthquake occurs, the electrical equipment of substation is prone to damage because of its own structural features, top-heavy, and brittleness of main body. At the same time, due to the complex coupling of the soft electrical connection of substation electrical equipment, the negative impact can not be estimated. In this paper, the finite element model of the coupling system of the single unit of high voltage electrical equipment with the connecting soft bus is established and the seismic response is analysed. The results showed that there is a significant difference between the simple analysis for the seismic response of electrical equipment monomer and the analytical results of electrical equipment systems, and the impact on different electrical equipment is different. It lays a foundation for the future development of seismic performance analysis of extra high voltage electrical equipment.

Virtual Prototyping and Validation of Cpps within a New Software Framework

Directory of Open Access Journals (Sweden)

Sebastian Neumeyer

2017-02-01

Full Text Available As a result of the growing demand for highly customized and individual products, companies need to enable flexible and intelligent manufacturing. Cyber-physical production systems (CPPS will act autonomously in the future in an interlinked production and enable such flexibility. However, German mid-sized plant manufacturers rarely use virtual technologies for design and validation in order to design CPPS. The research project Virtual Commissioning with Smart Hybrid Prototyping (VIB-SHP investigated the usage of virtual technologies for manufacturing systems and CPPS design. Aspects of asynchronous communicating, intelligent- and autonomous-acting production equipment in an immersive validation environment, have been investigated. To enable manufacturing system designers to validate CPPS, a software framework for virtual prototyping has been developed. A mechatronic construction kit for production system design integrates discipline-specific models and manages them in a product lifecycle management (PLM solution. With this construction kit manufacturing designers are able to apply virtual technologies and the validation of communication processes with the help of behavior models. The presented approach resolves the sequential design process for the development of mechanical, electrical, and software elements and ensures the consistency of these models. With the help of a bill of material (BOM- and signal-based alignment of the discipline-specific models in an integrated mechatronic product model, the communication of the design status and changes are improved. The re-use of already-specified and -designed modules enable quick behavior modeling, code evaluation, as well as interaction with the virtualized assembly system in an immersive environment.

Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-09

The document reproduces the text of the Notes Verbales received by the Director General of the IAEA on 20 October 1999 from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belgium, Brazil, Bulgaria, Canada, the Czech Republic, Denmark, Finland, France, Germany, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, the Netherlands, New Zealand, Norway, Poland, Portugal, Romania, the Slovak Republic, South Africa, Spain, Sweden, Switzerland, Ukraine, the United Kingdom, and the United States of America relating to the transfers of nuclear-related dual-use equipment, materials, software and related technology.

Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

International Nuclear Information System (INIS)

2000-01-01

The document reproduces the text of the Notes Verbales received by the Director General of the IAEA on 20 October 1999 from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belgium, Brazil, Bulgaria, Canada, the Czech Republic, Denmark, Finland, France, Germany, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, the Netherlands, New Zealand, Norway, Poland, Portugal, Romania, the Slovak Republic, South Africa, Spain, Sweden, Switzerland, Ukraine, the United Kingdom, and the United States of America relating to the transfers of nuclear-related dual-use equipment, materials, software and related technology

Communications Received from Certain Member States Regarding Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2006-01-01

The Director General of the International Atomic Energy Agency has received Notes Verbales, dated 1 December 2005, from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, Croatia, Czech Republic, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, New Zealand, Poland, Portugal, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology

Methods and Software Architecture for Activity Recognition from Position Data

DEFF Research Database (Denmark)

Godsk, Torben

This thesis describes my studies on the subject of recognizing cow activities from satellite based position data. The studies comprise methods and software architecture for activity recognition from position data, applied to cow activity recognition. The development of methods and software....... The results of these calculations are applied to a given standard machine learning algorithm, and the activity, performed by the cow as the measurements were recorded, is recognized. The software architecture integrates these methods and ensures flexible activity recognition. For instance, it is flexible...... in relation to the use of different sensors modalities and/or within different domains. In addition, the methods and their integration with the software architecture ensures both robust and accurate activity recognition. Utilized, it enables me to classify the five activities robustly and with high success...

Software for safety critical applications

International Nuclear Information System (INIS)

Kropik, M.; Matejka, K.; Jurickova, M.; Chudy, R.

2001-01-01

The contribution gives an overview of the project of the software development for safety critical applications. This project has been carried out since 1997. The principal goal of the project was to establish a research laboratory for the development of the software with the highest requirements for quality and reliability. This laboratory was established at the department, equipped with proper hardware and software to support software development. A research team of predominantly young researchers for software development was created. The activities of the research team started with studying and proposing the software development methodology. In addition, this methodology was applied to the real software development. The verification and validation process followed the software development. The validation system for the integrated hardware and software tests was brought into being and its control software was developed. The quality of the software tools was also observed, and the SOSAT tool was used during these activities. National and international contacts were established and maintained during the project solution.(author)

Poster: A Software-Defined Multi-Camera Network

OpenAIRE

Chen, Po-Yen; Chen, Chien; Selvaraj, Parthiban; Claesen, Luc

2016-01-01

The widespread popularity of OpenFlow leads to a significant increase in the number of applications developed in SoftwareDefined Networking (SDN). In this work, we propose the architecture of a Software-Defined Multi-Camera Network consisting of small, flexible, economic, and programmable cameras which combine the functions of the processor, switch, and camera. A Software-Defined Multi-Camera Network can effectively reduce the overall network bandwidth and reduce a large amount of the Capex a...

Building flexible, distributed collaboration tools using type-based publish/subscribe - The Distributed Knight case

DEFF Research Database (Denmark)

Hansen, Klaus Marius; Damm, Christian Heide

2004-01-01

Distributed collaboration is becoming increasingly impor tant also in software development. Combined with an in creasing interest in experimental and agile approaches to software development, this poses challenges to tool sup port for software development. Specifically, tool support is needed...... for flexible, distributed collaboration. We intro duce the Distributed Knight tool that provides flexible and lightweight support for distributed collaboration in object oriented modelling. The Distributed Knight implementa tion builds crucially on the type-based publish/subscribe distributed communication...... paradigm, which provides an effective and natural abstraction for developing distributed collaboration tools....

Test and Analysis of Metallurgical Converter Equipment

Directory of Open Access Journals (Sweden)

Shan Pang

2013-05-01

Full Text Available Oxygen top-blow converter is the main equipment in steel making, and its work reliability decides the security and economy of steel production. Therefore, how to design and test analysis of convertor has been an important subject of industry research. Geometric modelling and structure analysis of converter tilting device by using Pro/E program .The design Principle, basic design structure were analyzed in detail. The computer simulation software of metallurgical converter equipment and how to use it were introduced .It developed by VC++ software. The position of barycentre and moment curve in No.3 and No.4 are calculated. The converter acceleration down dip can be resolved by comparing the moment curve and center curve.

Communication Received from the Permanent Mission of the Republic of Serbia to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2012-01-01

The Director General has received a note verbale dated 28 September 2012 from the Permanent Mission of Serbia to the International Atomic Energy Agency providing information on the decision of the Government of Serbia to adhere to the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2 [es

Communication Received from the Permanent Mission of the Republic of Serbia to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2012-01-01

The Director General has received a note verbale dated 28 September 2012 from the Permanent Mission of Serbia to the International Atomic Energy Agency providing information on the decision of the Government of Serbia to adhere to the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2 [fr

Communication Received from the Permanent Mission of the Republic of Serbia to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2012-01-01

The Director General has received a note verbale dated 28 September 2012 from the Permanent Mission of Serbia to the International Atomic Energy Agency providing information on the decision of the Government of Serbia to adhere to the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2

Software

Energy Technology Data Exchange (ETDEWEB)

Macedo, R.; Budd, G.; Ross, E.; Wells, P.

2010-07-15

addition to a description of the software application, the name of software providers were listed along with the new features available in each product. The survey included products developed by ADP Inc.; Energy Navigator Inc.; Enersight Canada; Entero Corporation; Envirosoft Corporation; Geologic Systems Ltd.; IHS; Jedex Equipment Ltd.; MJ Systems; OpenSpirit; Petro Management Group Ltd.; P2 Energy Solutions; Risk Advisory, A division of SAS; Seisware International Inc.; Sustainet Software International Inc.; and 3ESI.

Free-Standing, Flexible, Superomniphobic Films.

Science.gov (United States)

Vahabi, Hamed; Wang, Wei; Movafaghi, Sanli; Kota, Arun K

2016-08-31

Fabrication of most superomniphobic surfaces requires complex process conditions or specialized and expensive equipment or skilled personnel. In order to circumvent these issues and make them end-user-friendly, we developed the free-standing, flexible, superomniphobic films. These films can be stored and delivered to the end-users, who can readily attach them to virtually any surface (even irregular shapes) and impart superomniphobicity. The hierarchical structure, the re-entrant texture, and the low solid surface energy render our films superomniphobic for a wide variety of liquids. We demonstrate that our free-standing, flexible, superomniphobic films have applications in enhanced chemical resistance and enhanced weight bearing.

Cloud flexibility using DIRAC interware

Science.gov (United States)

Fernandez Albor, Víctor; Seco Miguelez, Marcos; Fernandez Pena, Tomas; Mendez Muñoz, Victor; Saborido Silva, Juan Jose; Graciani Diaz, Ricardo

2014-06-01

Communities of different locations are running their computing jobs on dedicated infrastructures without the need to worry about software, hardware or even the site where their programs are going to be executed. Nevertheless, this usually implies that they are restricted to use certain types or versions of an Operating System because either their software needs an definite version of a system library or a specific platform is required by the collaboration to which they belong. On this scenario, if a data center wants to service software to incompatible communities, it has to split its physical resources among those communities. This splitting will inevitably lead to an underuse of resources because the data centers are bound to have periods where one or more of its subclusters are idle. It is, in this situation, where Cloud Computing provides the flexibility and reduction in computational cost that data centers are searching for. This paper describes a set of realistic tests that we ran on one of such implementations. The test comprise software from three different HEP communities (Auger, LHCb and QCD phenomelogists) and the Parsec Benchmark Suite running on one or more of three Linux flavors (SL5, Ubuntu 10.04 and Fedora 13). The implemented infrastructure has, at the cloud level, CloudStack that manages the virtual machines (VM) and the hosts on which they run, and, at the user level, the DIRAC framework along with a VM extension that will submit, monitorize and keep track of the user jobs and also requests CloudStack to start or stop the necessary VM's. In this infrastructure, the community software is distributed via the CernVM-FS, which has been proven to be a reliable and scalable software distribution system. With the resulting infrastructure, users are allowed to send their jobs transparently to the Data Center. The main purpose of this system is the creation of flexible cluster, multiplatform with an scalable method for software distribution for several

Cloud flexibility using DIRAC interware

International Nuclear Information System (INIS)

Albor, Víctor Fernandez; Miguelez, Marcos Seco; Silva, Juan Jose Saborido; Pena, Tomas Fernandez; Muñoz, Victor Mendez; Diaz, Ricardo Graciani

2014-01-01

Communities of different locations are running their computing jobs on dedicated infrastructures without the need to worry about software, hardware or even the site where their programs are going to be executed. Nevertheless, this usually implies that they are restricted to use certain types or versions of an Operating System because either their software needs an definite version of a system library or a specific platform is required by the collaboration to which they belong. On this scenario, if a data center wants to service software to incompatible communities, it has to split its physical resources among those communities. This splitting will inevitably lead to an underuse of resources because the data centers are bound to have periods where one or more of its subclusters are idle. It is, in this situation, where Cloud Computing provides the flexibility and reduction in computational cost that data centers are searching for. This paper describes a set of realistic tests that we ran on one of such implementations. The test comprise software from three different HEP communities (Auger, LHCb and QCD phenomelogists) and the Parsec Benchmark Suite running on one or more of three Linux flavors (SL5, Ubuntu 10.04 and Fedora 13). The implemented infrastructure has, at the cloud level, CloudStack that manages the virtual machines (VM) and the hosts on which they run, and, at the user level, the DIRAC framework along with a VM extension that will submit, monitorize and keep track of the user jobs and also requests CloudStack to start or stop the necessary VM's. In this infrastructure, the community software is distributed via the CernVM-FS, which has been proven to be a reliable and scalable software distribution system. With the resulting infrastructure, users are allowed to send their jobs transparently to the Data Center. The main purpose of this system is the creation of flexible cluster, multiplatform with an scalable method for software distribution for

PL-DA-PS: A hardware architecture and software toolbox for neurophysiology requiring complex visual stimuli and online behavioral control

Directory of Open Access Journals (Sweden)

Kyler M. Eastman

2012-01-01

Full Text Available Neurophysiological studies in awake, behaving primates (both human and nonhuman primates have focused with increasing scrutiny on the temporal relationship between neural signals and behaviors. Consequently, laboratories are often faced with the problem of developing experimental equipment that can support data recording with high temporal precision and also be flexible enough to accommodate a wide variety of experimental paradigms. To this end, we have developed an architecture that integrates several modern pieces of equipment, but still grants experimenters a high degree of flexibility. Our hardware architecture and software tools take advantage of three popular and powerful technologies: the PLexon apparatus for neurophysiological recordings (Plexon, Inc., Dallas TX, a DAtapixx box (Vpixx Technologies, Saint-Bruno, QC, Canada for analog, digital, and video signal input-output control, and the PSychtoolbox MATLAB toolbox for stimulus generation (Brainard, 1997. The PL-DA-PS (Platypus system is designed to support the study of the visual systems of awake, behaving primates during multi-electrode neurophysiological recordings, but can be easily applied to other related domains. Despite its wide range of capabilities and support for cutting-edge video displays and neural recording systems, the PLDAPS system is simple enough for someone with basic MATLAB programming skills to design their own experiments.

Qualification test for the flexible receiver

International Nuclear Information System (INIS)

Keller, C.M.

1994-01-01

This document provides the test plan and procedures to certify and design verify the 42 inch and 4--6 inch Flexible Receiver (FR) is a safety class 3 system. Verification of the design will be handled in two parts. The first part will be to show that it meets design requirements set forth by documents and the second part will perform test(s) to verify its operational aspects. To qualify the design of the FR systems for field use this test will demonstrate environmentally safe removal of a Tank Farm pump mock-up from a Tank Farm riser mock-up. Testing will also demonstrate the performance of supporting equipment. The FR and the Secondary Bagging (SB) equipment shall be tested to verify successful operation of the equipment to the following criteria: The FR can be placed on a riser and connections made to the supporting equipment; The FR bag can accept equipment and be successfully sealed; The SB system encases the seal of the primary FR bag; The flexible bag(s) do not tear and maintain integrity during the entire test; The FR control system operates in the fail safe forced sequence mode; The FR control system will operate in the manual override mode (out of sequence operations); The CCTV Video system monitors and records the removal of the test item; The spray wash system operates without leaks and effectively provides coverage; The item being removed can be reinserted to a depth of 8 feet and the bag reinstalled onto the vertical bag supports; and The system prohibits momentary mechanical fluctuations due to the application of system power, including power interruptions

Flexible event reconstruction software chains with the ALICE High-Level Trigger

International Nuclear Information System (INIS)

Ram, D; Breitner, T; Szostak, A

2012-01-01

The ALICE High-Level Trigger (HLT) has a large high-performance computing cluster at CERN whose main objective is to perform real-time analysis on the data generated by the ALICE experiment and scale it down to at-most 4GB/sec - which is the current maximum mass-storage bandwidth available. Data-flow in this cluster is controlled by a custom designed software framework. It consists of a set of components which can communicate with each other via a common control interface. The software framework also supports the creation of different configurations based on the detectors participating in the HLT. These configurations define a logical data processing “chain” of detector data-analysis components. Data flows through this software chain in a pipelined fashion so that several events can be processed at the same time. An instance of such a chain can run and manage a few thousand physics analysis and data-flow components. The HLT software and the configuration scheme used in the 2011 heavy-ion runs of ALICE, has been discussed in this contribution.

Lack of security of networked medical equipment in radiology.

Science.gov (United States)

Moses, Vinu; Korah, Ipeson

2015-02-01

OBJECTIVE. There are few articles in the literature describing the security and safety aspects of networked medical equipment in radiology departments. Most radiologists are unaware of the security issues. We review the security of the networked medical equipment of a typical radiology department. MATERIALS AND METHODS. All networked medical equipment in a radiology department was scanned for vulnerabilities with a port scanner and a network vulnerability scanner, and the vulnerabilities were classified using the Common Vulnerability Scoring System. A network sniffer was used to capture and analyze traffic on the radiology network for exposure of confidential patient data. We reviewed the use of antivirus software and firewalls on the networked medical equipment. USB ports and CD and DVD drives in the networked medical equipment were tested to see whether they allowed unauthorized access. Implementation of the virtual private network (VPN) that vendors use to access the radiology network was reviewed. RESULTS. Most of the networked medical equipment in our radiology department used vulnerable software with open ports and services. Of the 144 items scanned, 64 (44%) had at least one critical vulnerability, and 119 (83%) had at least one high-risk vulnerability. Most equipment did not encrypt traffic and allowed capture of confidential patient data. Of the 144 items scanned, two (1%) used antivirus software and three (2%) had a firewall enabled. The USB ports were not secure on 49 of the 58 (84%) items with USB ports, and the CD or DVD drive was not secure on 17 of the 31 (55%) items with a CD or DVD drive. One of three vendors had an insecure implementation of VPN access. CONCLUSION. Radiologists and the medical industry need to urgently review and rectify the security issues in existing networked medical equipment. We hope that the results of our study and this article also raise awareness among radiologists about the security issues of networked medical equipment.

Communications Received from Certain Member States Regarding Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2006-01-01

The Director General of the International Atomic Energy Agency has received Notes Verbales, dated 1 December 2005, from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, Croatia, Czech Republic, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, New Zealand, Poland, Portugal, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology [es

Communications Received from Certain Member States Regarding Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2006-01-01

The Director General of the International Atomic Energy Agency has received Notes Verbales, dated 1 December 2005, from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, Croatia, Czech Republic, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, New Zealand, Poland, Portugal, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology [fr

Korean WA-DGNSS User Segment Software Design

Directory of Open Access Journals (Sweden)

Sayed Chhattan Shah

2013-03-01

Full Text Available Korean WA-DGNSS is a large scale research project funded by Ministry of Land, Transport and Maritime Affairs Korea. It aims to augment the Global Navigation Satellite System by broadcasting additional signals from geostationary satellites and providing differential correction messages and integrity data for the GNSS satellites. The project is being carried out by a consortium of universities and research institutes. The research team at Electronics and Telecommunications Research Institute is involved in design and development of data processing softwares for wide area reference station and user segment. This paper focuses on user segment software design. Korean WA-DGNSS user segment software is designed to perform several functions such as calculation of pseudorange, ionosphere and troposphere delays, application of fast and slow correction messages, and data verification. It is based on a layered architecture that provides a model to develop flexible and reusable software and is divided into several independent, interchangeable and reusable components to reduce complexity and maintenance cost. The current version is designed to collect and process GPS and WA-DGNSS data however it is flexible to accommodate future GNSS systems such as GLONASS and Galileo.

The application of GIS equipment in nuclear power plant

International Nuclear Information System (INIS)

Ji Lin; Huang Pengbo; Chang Xin'ai

2012-01-01

In this paper, the advantage and disadvantage of gas insulated switchgear (GIS) in environmental adaptability, operation safety and economic benefit are analyzed. Issues concerning the manufacture, transportation, on-site installation, operation, maintenance and extension of GIS equipment are discussed. Comparing those characteristics with air insulated switchgear (AIS), GIS is characterized by better aseismic ability, less occupied area and installation process, lower fault rate, longer maintenance period, easier for extension and higher economic benefit, SF6 gas insures the operation safety and reliability of GIS equipment, modular transport and re-assembling improves the installation flexibility. Therefore, GIS equipment may be the first choice for the primary equipment of nuclear power plant. (authors)

Flexibility Study of a Liquid Food Production Process

DEFF Research Database (Denmark)

Cheng, Hongyuan; Friis, Alan

2006-01-01

Applying process engineering simulation method to model the processing of liquid food can provide a way to build a flexible food factory that can efficiently offer a wide range of tailored products in short delivery time. A milk production process, as an example, is simulated using a process...... engineering software to investigate the process operation conditions and flexibility. The established simulation method can be adapted to simulate similar liquid food production processes through suitable modifications....

CcpNmr AnalysisAssign: a flexible platform for integrated NMR analysis

International Nuclear Information System (INIS)

Skinner, Simon P.; Fogh, Rasmus H.; Boucher, Wayne; Ragan, Timothy J.; Mureddu, Luca G.; Vuister, Geerten W.

2016-01-01

NMR spectroscopy is an indispensably powerful technique for the analysis of biomolecules under ambient conditions, both for structural- and functional studies. However, in practice the complexity of the technique has often frustrated its application by non-specialists. In this paper, we present CcpNmr version-3, the latest software release from the Collaborative Computational Project for NMR, for all aspects of NMR data analysis, including liquid- and solid-state NMR data. This software has been designed to be simple, functional and flexible, and aims to ensure that routine tasks can be performed in a straightforward manner. We have designed the software according to modern software engineering principles and leveraged the capabilities of modern graphics libraries to simplify a variety of data analysis tasks. We describe the process of backbone assignment as an example of the flexibility and simplicity of implementing workflows, as well as the toolkit used to create the necessary graphics for this workflow. The package can be downloaded from www.ccpn.ac.uk/v3-software/downloads http://www.ccpn.ac.uk/v3-software/downloads and is freely available to all non-profit organisations.

CcpNmr AnalysisAssign: a flexible platform for integrated NMR analysis

Energy Technology Data Exchange (ETDEWEB)

Skinner, Simon P.; Fogh, Rasmus H. [University of Leicester, Department of Molecular and Cell Biology, Leicester Institute for Structural- and Chemical Biology (United Kingdom); Boucher, Wayne [University of Cambridge, Department of Biochemistry (United Kingdom); Ragan, Timothy J.; Mureddu, Luca G.; Vuister, Geerten W., E-mail: gv29@le.ac.uk [University of Leicester, Department of Molecular and Cell Biology, Leicester Institute for Structural- and Chemical Biology (United Kingdom)

2016-10-15

NMR spectroscopy is an indispensably powerful technique for the analysis of biomolecules under ambient conditions, both for structural- and functional studies. However, in practice the complexity of the technique has often frustrated its application by non-specialists. In this paper, we present CcpNmr version-3, the latest software release from the Collaborative Computational Project for NMR, for all aspects of NMR data analysis, including liquid- and solid-state NMR data. This software has been designed to be simple, functional and flexible, and aims to ensure that routine tasks can be performed in a straightforward manner. We have designed the software according to modern software engineering principles and leveraged the capabilities of modern graphics libraries to simplify a variety of data analysis tasks. We describe the process of backbone assignment as an example of the flexibility and simplicity of implementing workflows, as well as the toolkit used to create the necessary graphics for this workflow. The package can be downloaded from www.ccpn.ac.uk/v3-software/downloads http://www.ccpn.ac.uk/v3-software/downloads and is freely available to all non-profit organisations.

Developing Software For Monitoring And Diagnosis

Science.gov (United States)

Edwards, S. J.; Caglayan, A. K.

1993-01-01

Expert-system software shell produces executable code. Report discusses beginning phase of research directed toward development of artificial intelligence for real-time monitoring of, and diagnosis of faults in, complicated systems of equipment. Motivated by need for onboard monitoring and diagnosis of electronic sensing and controlling systems of advanced aircraft. Also applicable to such equipment systems as refineries, factories, and powerplants.

Civacuve analysis software for mis machine examination of pressurized water reactor vessels

International Nuclear Information System (INIS)

Dubois, Ph.; Gagnor, A.

2001-01-01

The product software CIVACUVE is used by INTERCONTROLE for the analysis of UT examinations, for detection, performed by the In-Service Inspection Machine (MIS) of the vessels of nuclear power plants. This software is based on an adaptation of an algorithm of SEGMENTATION (CEA CEREM), which is applied prior to any analysis. It is equipped with tools adapted to industrial use. It allows to: - perform image analysis thanks to advanced graphic tools (Zooms, True Bscan, 'contour' selection...), - backup of all data in a database (complete and transparent backup of all informations used and obtained during the different analysis operations), - connect PC to the Database (export of Reports and even of segmented points), - issue Examination Reports, Operating Condition Sheets, Sizing curves... - and last, perform a graphic and numerical comparison between different inspections of the same vessel. Used in Belgium and France on different kind of reactor vessels, CIVACUVE has allowed to show that the principle of SEGMENTATION can be adapted to detection exams. The use of CIVACUVE generates a important time gain as well as the betterment of quality in analysis. Wide data opening toward PC's allows a real flexibility with regard to client's requirements and preoccupations

Firing Room Remote Application Software Development

Science.gov (United States)

Liu, Kan

2015-01-01

The Engineering and Technology Directorate (NE) at National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC) is designing a new command and control system for the checkout and launch of Space Launch System (SLS) and future rockets. The purposes of the semester long internship as a remote application software developer include the design, development, integration, and verification of the software and hardware in the firing rooms, in particular with the Mobile Launcher (ML) Launch Accessories (LACC) subsystem. In addition, a software test verification procedure document was created to verify and checkout LACC software for Launch Equipment Test Facility (LETF) testing.

ELECTRODYNAMIC STABILITY COMPUTATIONS FOR FLEXIBLE CONDUCTORS OF THE AERIAL LINES

Directory of Open Access Journals (Sweden)

I. I. Sergey

2015-01-01

Full Text Available In aerial transmission lines aluminium multiwire conductors are in use. Owing to their flexible design the electrodynamic effect of short circuit currents may lead to intolerable mutual rendezvous and even cross-whipping of the phase conductors. The increasing motion of the conductors caused by effect of the short-circuit electrodynamic force impulse is accompanied by the dynamic load impact affecting the conductors, insulating and supporting constructions of the aerial lines. Intensity of the short-circuit currents electrodynamic impact on the flexible conductors depends on the short circuit current magnitude. For research into electrodynamic endurance of the conductors of the aerial lines located at the vertices of arbitrary triangle with spans of a large length, the authors assume the conductor analytical model in the form of a flexible tensile thread whose mass is distributed evenly lengthwise the conductor. With this analytical model, by the action of the imposed forces the conductor assumes the form conditioned by the diagram of applied external forces, and resists neither bending nor torsion. The initial conditions calculation task reduces to solving the flexible thread statics equations. The law of motion of the conductor marginal points comes out of the conjoint solution of dynamic equations of the conductor and structural components of the areal electric power lines. Based on the proposed algorithm, the researchers of the Chair of the Electric Power Stations of BNTU developed a software program LINEDYS+, which in its characteristics yields to no foreign analogs, e. g. SAMSEF. To calculate the initial conditions they modified a software program computing the flexible conductor mechanics named MR 21. The conductor short-circuit electrodynamic interaction estimation considers structural elements of the areal lines, ice and wind loads, objective parameters of the short circuit. The software programs are accommodated with the simple and

Fatigue analysis of flexible pipes using alternative element types and bend stiffener data

OpenAIRE

Chen, Minghao

2011-01-01

The flexible pipe is a vital part of a floating production system. The lifetime of a flexible riser system is crucial for the Health Safety and Environment (HSE) management. As a result of this, it is very necessary to carry out research on the lifetime of flexible pipe. In this thesis we formalized analysis on flexible pipes, utilizing the finite element analysis software BFLEX 2010, developed by MARINTEK. Chapter 1 describes basic knowledge about flexible pipe and relevant facilities. C...

Software-based acoustical measurements

CERN Document Server

Miyara, Federico

2017-01-01

This textbook provides a detailed introduction to the use of software in combination with simple and economical hardware (a sound level meter with calibrated AC output and a digital recording system) to obtain sophisticated measurements usually requiring expensive equipment. It emphasizes the use of free, open source, and multiplatform software. Many commercial acoustical measurement systems use software algorithms as an integral component; however the methods are not disclosed. This book enables the reader to develop useful algorithms and provides insight into the use of digital audio editing tools to document features in the signal. Topics covered include acoustical measurement principles, in-depth critical study of uncertainty applied to acoustical measurements, digital signal processing from the basics, and metrologically-oriented spectral and statistical analysis of signals. The student will gain a deep understanding of the use of software for measurement purposes; the ability to implement software-based...

PROSPECTS FOR APPLICATION OF FLEXIBLE ULTRASONIC WAVEGUIDE SYSTEMS IN MEDICINE AND ENGINEERING

Directory of Open Access Journals (Sweden)

V. T. Minchenya

2010-01-01

Full Text Available The article presents comprehensive review of current and possible future applications of flexible ultrasonic waveguides in medicine and engineering. Issues of design, modelling and manufacturing of flexible waveguides are considered. The article also presents some results of the authors in this field, particularly modelling techniques developed for the design of flexible waveguides and ultrasonic technologies and equipment for ultrasonic thromboectomy, heating of frozen fuel and ultrasonic drilling of brittle materials. Novel technology for manufacturing flexible waveguides based on electrolytic-plasma machining is also described

Design of EPON far-end equipment based on FTTH

Science.gov (United States)

Feng, Xiancheng; Yun, Xiang

2008-12-01

Now, most favors fiber access is mainly the EPON fiber access system. Inheriting from the low cost of Ethernet, usability and bandwidth of optical network, EPON technology is one of the best technologies in fiber access and is adopted by the carriers all over the world widely. According to the scheme analysis to FTTH fan-end equipment, hardware design of ONU is proposed in this paper. The FTTH far-end equipment software design deference modulation design concept, it divides the software designment into 5 function modules: the module of low-layer driver, the module of system management, the module of master/slave communication, and the module of main/Standby switch and the module of command line. The software flow of the host computer is also analyzed. Finally, test is made for Ethernet service performance of FTTH far-end equipment, E1 service performance and the optical path protection switching, and so on. The results of test indicates that all the items are accordance with technical request of far-end ONU equipment and possess good quality and fully reach the requirement of telecommunication level equipment. The far-end equipment of FTTH divides into several parts based on the function: the control module, the exchange module, the UNI interface module, the ONU module, the EPON interface module, the network management debugging module, the voice processing module, the circuit simulation module, the CATV module. In the downstream direction, under the protect condition, we design 2 optical modules. The system can set one group optical module working and another group optical module closure when it is initialized. When the optical fiber line is cut off, the LOS warning comes out. It will cause MUX to replace another group optical module, simultaneously will reset module 3701/3711 and will make it again test the distance, and will give the plug board MPC850 report through the GPIO port. During normal mode, the downstream optical signal is transformed into the

The primary protection system software

International Nuclear Information System (INIS)

Tooley, P.A.

1992-01-01

This paper continues the detailed description of the Primary Protection System for Sizewell-B by providing an overview of design and implementation of the software, including the features of the design process which ensure that quality is delivered by the contractor. The Nuclear Electric software assessment activities are also described. The argument for the excellence of the software is made on the basis of a quality product delivered by the equipment supplier's design process, and the confirmation of this provided by the Nuclear Electric assessment process, which is as searching and complete an examination as is reasonably practicable to achieve. (author)

The reduction of noise from hydraulic equipments; La reduction du bruit provenant des equipements hydrauliques

Energy Technology Data Exchange (ETDEWEB)

Gential, R.

1996-09-01

Noise pollution from hydraulic equipments (bath filling, toilets taps, waste waters flow, vibrations, knocks in water pipes, dilatation clattering in heating pipes, hissing of heater taps etc..) are one of the principal causes of nuisance inside residential buildings. Solutions exist and consist in the replacement of old cocks and fittings, the use of soundproof clamps for pipes and noise absorbing supports for baths etc.. This paper summarizes the available modern equipments with a low-noise warranty (cocks and fittings, noise dampers, anti-backflow valves, pressure reducers) and the practical solutions for the modification of existing installations (increase of pipe diameters, reduction of pipe lengths, use of flexible fittings, hydraulic counterbalancing of water flows in heaters etc..). (J.S.)

Reconfigurable network systems and software-defined networking

OpenAIRE

Zilberman, N.; Watts, P. M.; Rotsos, C.; Moore, A. W.

2015-01-01

Modern high-speed networks have evolved from relatively static networks to highly adaptive networks facilitating dynamic reconfiguration. This evolution has influenced all levels of network design and management, introducing increased programmability and configuration flexibility. This influence has extended from the lowest level of physical hardware interfaces to the highest level of network management by software. A key representative of this evolution is the emergence of software-defined n...

Flexible Graphene-based Energy Storage Devices for Space Application Project

Science.gov (United States)

Calle, Carlos I.

2014-01-01

Develop prototype graphene-based reversible energy storage devices that are flexible, thin, lightweight, durable, and that can be easily attached to spacesuits, rovers, landers, and equipment used in space.

Development of a telerobotic system for handling contaminated process equipment

International Nuclear Information System (INIS)

Fisher, J.J.; Ward, C.R.; Schuler, T.F.

1987-01-01

E. I. du Pont de Nemours and Company is evaluating a unique eight-degree-of-freedom Telerobot manipulator to perform size-reduction and material handling operations on contaminated process equipment at the Savannah River Plant (SRP). The Telerobot will be installed in the proposed Transuranic (TRU) Waste Processing Facility, which is scheduled to be operational by 1990. A full-scale prototype Telerobot, manufactured by GCA Corporation, St. Paul, MN is being tested with other process equipment in the Components Test Facility at the Savannah River Laboratory (SRL). All telerobotic operations required in the TRU Waste Facility such as crate unpacking, equipment dismantling, material size-reduction, and selected maintenance operations are being tested. This paper discusses the major mechanical and control features of the Telerobot system. Several system enhancements were added by SRL, including a new quick-hand-change coupling and expanded software control functions. The new software enables a system operator to perform both teleoperated and automatic tasks through several operating modes. These enhancements, as well as future mechanical, control system, and software features, are reviewed

Small Portable Analyzer Diagnostic Equipment (SPADE) Program -- Diagnostic Software Validation

Science.gov (United States)

1984-07-01

Electronic Equipment Electromagnetic Emission and Susceptibility Requirements for the Control of Electromagnetic Interference Electromagnetic...ONLY. ORIENTATION OF DEFECT LOOKING HHO QIlILL: t -ed’-o· Significant efforts were expended to simulate spalling failures associated with naturally

Modernising ATLAS Software Build Infrastructure

CERN Document Server

Ritsch, Elmar; The ATLAS collaboration

2017-01-01

In the last year ATLAS has radically updated its software development infrastructure hugely reducing the complexity of building releases and greatly improving build speed, flexibility and code testing. The first step in this transition was the adoption of CMake as the software build system over the older CMT. This required the development of an automated translation from the old system to the new, followed by extensive testing and improvements. This resulted in a far more standard build process that was married to the method of building ATLAS software as a series of $12$ separate projects from Subversion. We then proceeded with a migration of the code base from Subversion to Git. As the Subversion repository had been structured to manage each package more or less independently there was no simple mapping that could be used to manage the migration into Git. Instead a specialist set of scripts that captured the software changes across official software releases was developed. With some clean up of the repositor...

Falcon: a highly flexible open-source software for closed-loop neuroscience.

Science.gov (United States)

Ciliberti, Davide; Kloosterman, Fabian

2017-08-01

Closed-loop experiments provide unique insights into brain dynamics and function. To facilitate a wide range of closed-loop experiments, we created an open-source software platform that enables high-performance real-time processing of streaming experimental data. We wrote Falcon, a C++ multi-threaded software in which the user can load and execute an arbitrary processing graph. Each node of a Falcon graph is mapped to a single thread and nodes communicate with each other through thread-safe buffers. The framework allows for easy implementation of new processing nodes and data types. Falcon was tested both on a 32-core and a 4-core workstation. Streaming data was read from either a commercial acquisition system (Neuralynx) or the open-source Open Ephys hardware, while closed-loop TTL pulses were generated with a USB module for digital output. We characterized the round-trip latency of our Falcon-based closed-loop system, as well as the specific latency contribution of the software architecture, by testing processing graphs with up to 32 parallel pipelines and eight serial stages. We finally deployed Falcon in a task of real-time detection of population bursts recorded live from the hippocampus of a freely moving rat. On Neuralynx hardware, round-trip latency was well below 1 ms and stable for at least 1 h, while on Open Ephys hardware latencies were below 15 ms. The latency contribution of the software was below 0.5 ms. Round-trip and software latencies were similar on both 32- and 4-core workstations. Falcon was used successfully to detect population bursts online with ~40 ms average latency. Falcon is a novel open-source software for closed-loop neuroscience. It has sub-millisecond intrinsic latency and gives the experimenter direct control of CPU resources. We envisage Falcon to be a useful tool to the neuroscientific community for implementing a wide variety of closed-loop experiments, including those requiring use of complex data structures and real

Falcon: a highly flexible open-source software for closed-loop neuroscience

Science.gov (United States)

Ciliberti, Davide; Kloosterman, Fabian

2017-08-01

Objective. Closed-loop experiments provide unique insights into brain dynamics and function. To facilitate a wide range of closed-loop experiments, we created an open-source software platform that enables high-performance real-time processing of streaming experimental data. Approach. We wrote Falcon, a C++ multi-threaded software in which the user can load and execute an arbitrary processing graph. Each node of a Falcon graph is mapped to a single thread and nodes communicate with each other through thread-safe buffers. The framework allows for easy implementation of new processing nodes and data types. Falcon was tested both on a 32-core and a 4-core workstation. Streaming data was read from either a commercial acquisition system (Neuralynx) or the open-source Open Ephys hardware, while closed-loop TTL pulses were generated with a USB module for digital output. We characterized the round-trip latency of our Falcon-based closed-loop system, as well as the specific latency contribution of the software architecture, by testing processing graphs with up to 32 parallel pipelines and eight serial stages. We finally deployed Falcon in a task of real-time detection of population bursts recorded live from the hippocampus of a freely moving rat. Main results. On Neuralynx hardware, round-trip latency was well below 1 ms and stable for at least 1 h, while on Open Ephys hardware latencies were below 15 ms. The latency contribution of the software was below 0.5 ms. Round-trip and software latencies were similar on both 32- and 4-core workstations. Falcon was used successfully to detect population bursts online with ~40 ms average latency. Significance. Falcon is a novel open-source software for closed-loop neuroscience. It has sub-millisecond intrinsic latency and gives the experimenter direct control of CPU resources. We envisage Falcon to be a useful tool to the neuroscientific community for implementing a wide variety of closed-loop experiments, including those

Business rules for creating process flexibility : Mapping RIF rules and BDI rules

NARCIS (Netherlands)

Gong, Y.; Overbeek, S.J.; Janssen, M.

2011-01-01

Business rules and software agents can be used for creating flexible business processes. The Rule Interchange Format (RIF) is a new W3C recommendation standard for exchanging rules among disparate systems. Yet, the impact that the introduction of RIF has on the design of flexible business processes

Robotic Software for the Thacher Observatory

Science.gov (United States)

Lawrence, George; Luebbers, Julien; Eastman, Jason D.; Johnson, John A.; Swift, Jonathan

2018-06-01

The Thacher Observatory—a research and educational facility located in Ojai, CA—uses a 0.7 meter telescope to conduct photometric research on a variety of targets including eclipsing binaries, exoplanet transits, and supernovae. Currently, observations are automated using commercial software. In order to expand the flexibility for specialized scientific observations and to increase the educational value of the facility on campus, we are adapting and implementing the custom observatory control software and queue scheduling developed for the Miniature Exoplanet Radial Velocity Array (MINERVA) to the Thacher Observatory. We present the design and implementation of this new software as well as its demonstrated functionality on the Thacher Observatory.

Network Coded Software Defined Networking

DEFF Research Database (Denmark)

Krigslund, Jeppe; Hansen, Jonas; Roetter, Daniel Enrique Lucani

2015-01-01

Software Defined Networking (SDN) and Network Coding (NC) are two key concepts in networking that have garnered a large attention in recent years. On the one hand, SDN's potential to virtualize services in the Internet allows a large flexibility not only for routing data, but also to manage....... This paper advocates for the use of SDN to bring about future Internet and 5G network services by incorporating network coding (NC) functionalities. The inherent flexibility of both SDN and NC provides a fertile ground to envision more efficient, robust, and secure networking designs, that may also...

Spring-back of flexible roll forming bending process

International Nuclear Information System (INIS)

Zhang, Y; Kim, D H; Jung, D W

2015-01-01

Simulations are now widely used in the field of roll forming because of their convenience. Simulations provide a low cost, secure and fast analysis tool. Flexible roll forming provides the desired shapes with a one time forming process. For roll forming, the velocity of the sheet and friction are important factors to attain an ideal shape. Because it is a complicated process, simulations provide a better understanding of the roll forming process. Simulations were peformed using ABAQUS software linked to elastic-plastic modules which we developed taking into account of interactions between these fields [1]. The application of this method makes it possible to highlight the strain-stress and mechanical behaviour laws and the spring-back. Thus, the flexible roll forming and bending process can be well described by the simulation software and guide the actual machine. (paper)

Worldwide collaborative efforts in plasma control software development

International Nuclear Information System (INIS)

Penaflor, B.G.; Ferron, J.R.; Walker, M.L.; Humphreys, D.A.; Leuer, J.A.; Piglowski, D.A.; Johnson, R.D.; Xiao, B.J.; Hahn, S.H.; Gates, D.A.

2008-01-01

This presentation will describe the DIII-D collaborations with various tokamak experiments throughout the world which have adapted custom versions of the DIII-D plasma control system (PCS) software for their own use. Originally developed by General Atomics for use on the DIII-D tokamak, the PCS has been successfully installed and used for the NSTX experiment in Princeton, the MAST experiment in Culham UK, the EAST experiment in China, and the Pegasus experiment in the University of Wisconsin. In addition to these sites, a version of the PCS is currently being developed for use by the KSTAR tokamak in Korea. A well-defined and robust PCS software infrastructure has been developed to provide a common foundation for implementing the real-time data acquisition and feedback control codes. The PCS infrastructure provides a flexible framework that has allowed the PCS to be easily adapted to fulfill the unique needs of each site. The software has also demonstrated great flexibility in allowing for different computing, data acquisition and real-time networking hardware to be used. A description of the current PCS software architecture will be given along with experiences in developing and supporting the various PCS installations throughout the world

Fatigue and rutting strain analysis of flexible pavements designed ...

African Journals Online (AJOL)

ELO

The study was carried out with the layered elastic analysis software EVERSTRESS. Key words: Layered elastic analysis, fatigue, rutting, strains, design, flexible pavement, CBR. ..... Numerical Computational Stresses and Strains in Multi-Layer ...

Implementation plan for HANDI 2000 TWRS master equipment list

International Nuclear Information System (INIS)

BENNION, S.I.

1999-01-01

This document presents the implementation plan for an additional deliverable of the HANDI 2000 Project. The PassPort Equipment Data module processes include those portions of the COTS PassPort system required to support tracking and management of the Master Equipment List for Lockheed Martin Hanford Company (LMHC) and custom software created to work with the COTS products

Management models in the NZ software industry

Directory of Open Access Journals (Sweden)

Holger Spill

Full Text Available This research interviewed eight innovative New Zealand software companies to find out how they manage new product development. It looked at how management used standard techniques of software development to manage product uncertainty through the theoretical lens of the Cyclic Innovation Model. The study found that while there is considerable variation, the management of innovation was largely determined by the level of complexity. Organizations with complex innovative software products had a more iterative software development style, more flexible internal processes and swifter decision-making. Organizations with less complexity in their products tended to use more formal structured approaches. Overall complexity could be inferred with reference to four key factors within the development environment.

Oil and gas products and energy equipment

International Nuclear Information System (INIS)

1996-01-01

The planned activities of the Canadian oil and gas products and energy equipment industry for 1996-1997, were presented. The sector is made up of approximately 1500 small and medium sized enterprises. The Canadian oil field manufacturing and servicing industry holds only a small 2.5% share of the world export market, but it is recognized internationally as one of the leading suppliers of advanced petroleum equipment. Their exports include specialized equipment for extracting oil sands, gathering and treatment facilities for sour gas, underbalanced drilling technologies, equipment for wells experiencing declining production rates, top motor drives, winter drilling rigs, and horizontal drilling technologies. They also offer petroleum industry software products. Most exploration and production equipment sold abroad by Canadian firms is manufactured in Canada, but there is an increasing trend toward manufacturing in the country of operation. 2 tabs

Microcomputer-based equipment-control and data-acquisition system for fission-reactor reactivity-worth measurements

International Nuclear Information System (INIS)

McDowell, W.P.; Bucher, R.G.

1980-01-01

Material reactivity-worth measurements are one of the major classes of experiments conducted on the Zero Power research reactors (ZPR) at Argonne National Laboratory. These measurements require the monitoring of the position of a servo control element as a sample material is positioned at various locations in a critical reactor configuration. In order to guarantee operational reliability and increase experimental flexibility for these measurements, the obsolete hardware-based control unit has been replaced with a microcomputer based equipment control and data acquisition system. This system is based on an S-100 bus, dual floppy disk computer with custom built cards to interface with the experimental system. To measure reactivity worths, the system accurately positions samples in the reactor core and acquires data on the position of the servo control element. The data are then analyzed to determine statistical adequacy. The paper covers both the hardware and software aspects of the design

Microcomputer-based equipment-control and data-acquisition system for fission-reactor reactivity-worth measurements

Energy Technology Data Exchange (ETDEWEB)

McDowell, W.P.; Bucher, R.G.

1980-01-01

Material reactivity-worth measurements are one of the major classes of experiments conducted on the Zero Power research reactors (ZPR) at Argonne National Laboratory. These measurements require the monitoring of the position of a servo control element as a sample material is positioned at various locations in a critical reactor configuration. In order to guarantee operational reliability and increase experimental flexibility for these measurements, the obsolete hardware-based control unit has been replaced with a microcomputer based equipment control and data acquisition system. This system is based on an S-100 bus, dual floppy disk computer with custom built cards to interface with the experimental system. To measure reactivity worths, the system accurately positions samples in the reactor core and acquires data on the position of the servo control element. The data are then analyzed to determine statistical adequacy. The paper covers both the hardware and software aspects of the design.

Management of airway foreign body using flexible bronchoscopy: Experience with 80 cases during 2011–2013

Directory of Open Access Journals (Sweden)

Safy Kaddah

2015-01-01

Conclusions: Flexible bronchoscopy is successful in retrieving airway foreign bodies (88.8%. With skilled personnel and perfect equipments, flexible bronchoscopy could be considered as the first choice for the removal of airway foreign body.

A flexible software architecture for scalable real-time image and video processing applications

Science.gov (United States)

Usamentiaga, Rubén; Molleda, Julio; García, Daniel F.; Bulnes, Francisco G.

2012-06-01

Real-time image and video processing applications require skilled architects, and recent trends in the hardware platform make the design and implementation of these applications increasingly complex. Many frameworks and libraries have been proposed or commercialized to simplify the design and tuning of real-time image processing applications. However, they tend to lack flexibility because they are normally oriented towards particular types of applications, or they impose specific data processing models such as the pipeline. Other issues include large memory footprints, difficulty for reuse and inefficient execution on multicore processors. This paper presents a novel software architecture for real-time image and video processing applications which addresses these issues. The architecture is divided into three layers: the platform abstraction layer, the messaging layer, and the application layer. The platform abstraction layer provides a high level application programming interface for the rest of the architecture. The messaging layer provides a message passing interface based on a dynamic publish/subscribe pattern. A topic-based filtering in which messages are published to topics is used to route the messages from the publishers to the subscribers interested in a particular type of messages. The application layer provides a repository for reusable application modules designed for real-time image and video processing applications. These modules, which include acquisition, visualization, communication, user interface and data processing modules, take advantage of the power of other well-known libraries such as OpenCV, Intel IPP, or CUDA. Finally, we present different prototypes and applications to show the possibilities of the proposed architecture.

49 CFR 238.105 - Train electronic hardware and software safety.

Science.gov (United States)

2010-10-01

... and software system safety as part of the pre-revenue service testing of the equipment. (d)(1... safely by initiating a full service brake application in the event of a hardware or software failure that... 49 Transportation 4 2010-10-01 2010-10-01 false Train electronic hardware and software safety. 238...

A flexible and configurable system to test accelerator magnets

Energy Technology Data Exchange (ETDEWEB)

Jerzy M. Nogiec et al.

2001-07-20

Fermilab's accelerator magnet R and D programs, including production of superconducting high gradient quadrupoles for the LHC insertion regions, require rigorous yet flexible magnetic measurement systems. Measurement systems must be capable of handling various types of hardware and extensible to all measurement technologies and analysis algorithms. A tailorable software system that satisfies these requirements is discussed. This single system, capable of distributed parallel signal processing, is built on top of a flexible component-based framework that allows for easy reconfiguration and run-time modification. Both core and domain-specific components can be assembled into various magnet test or analysis systems. The system configured to comprise a rotating coil harmonics measurement is presented. Technologies as Java, OODB, XML, JavaBeans, software bus and component-based architectures are used.

Qualification of software and hardware

International Nuclear Information System (INIS)

Gossner, S.; Schueller, H.; Gloee, G.

1987-01-01

The qualification of on-line process control equipment is subdivided into three areas: 1) materials and structural elements; 2) on-line process-control components and devices; 3) electrical systems (reactor protection and confinement system). Microprocessor-aided process-control equipment are difficult to verify for failure-free function owing to the complexity of the functional structures of the hardware and to the variety of the software feasible for microprocessors. Hence, qualification will make great demands on the inspecting expert. (DG) [de

The Enterprise Derivative Application: Flexible Software for Optimizing Manufacturing Processes

Energy Technology Data Exchange (ETDEWEB)

Ward, Richard C [ORNL; Allgood, Glenn O [ORNL; Knox, John R [ORNL

2008-11-01

The Enterprise Derivative Application (EDA) implements the enterprise-derivative analysis for optimization of an industrial process (Allgood and Manges, 2001). It is a tool to help industry planners choose the most productive way of manufacturing their products while minimizing their cost. Developed in MS Access, the application allows users to input initial data ranging from raw material to variable costs and enables the tracking of specific information as material is passed from one process to another. Energy-derivative analysis is based on calculation of sensitivity parameters. For the specific application to a steel production process these include: the cost to product sensitivity, the product to energy sensitivity, the energy to efficiency sensitivity, and the efficiency to cost sensitivity. Using the EDA, for all processes the user can display a particular sensitivity or all sensitivities can be compared for all processes. Although energy-derivative analysis was originally designed for use by the steel industry, it is flexible enough to be applied to many other industrial processes. Examples of processes where energy-derivative analysis would prove useful are wireless monitoring of processes in the petroleum cracking industry and wireless monitoring of motor failure for determining the optimum time to replace motor parts. One advantage of the MS Access-based application is its flexibility in defining the process flow and establishing the relationships between parent and child process and products resulting from a process. Due to the general design of the program, a process can be anything that occurs over time with resulting output (products). So the application can be easily modified to many different industrial and organizational environments. Another advantage is the flexibility of defining sensitivity parameters. Sensitivities can be determined between all possible variables in the process flow as a function of time. Thus the dynamic development of the

Development of tools for safety analysis of control software in advanced reactors

International Nuclear Information System (INIS)

Guarro, S.; Yau, M.; Motamed, M.

1996-04-01

Software based control systems have gained a pervasive presence in a wide variety of applications, including nuclear power plant control and protection systems which are within the oversight and licensing responsibility of the US Nuclear Regulatory Commission. While the cost effectiveness and flexibility of software based plant process control is widely recognized, it is very difficult to achieve and prove high levels of demonstrated dependability and safety assurance for the functions performed by process control software, due to the very flexibility and potential complexity of the software itself. The development of tools to model, analyze and test software design and implementations in the context of the system that the software is designed to control can greatly assist the task of providing higher levels of assurance than those obtainable by software testing alone. This report presents and discusses the development of the Dynamic Flowgraph Methodology (DFM) and its application in the dependability and assurance analysis of software-based control systems. The features of the methodology and full-scale examples of application to both generic process and nuclear power plant control systems are presented and discussed in detail. The features of a workstation software tool developed to assist users in the application of DFM are also described

Development of tools for safety analysis of control software in advanced reactors

Energy Technology Data Exchange (ETDEWEB)

Guarro, S.; Yau, M.; Motamed, M. [Advanced Systems Concepts Associates, El Segundo, CA (United States)

1996-04-01

Software based control systems have gained a pervasive presence in a wide variety of applications, including nuclear power plant control and protection systems which are within the oversight and licensing responsibility of the US Nuclear Regulatory Commission. While the cost effectiveness and flexibility of software based plant process control is widely recognized, it is very difficult to achieve and prove high levels of demonstrated dependability and safety assurance for the functions performed by process control software, due to the very flexibility and potential complexity of the software itself. The development of tools to model, analyze and test software design and implementations in the context of the system that the software is designed to control can greatly assist the task of providing higher levels of assurance than those obtainable by software testing alone. This report presents and discusses the development of the Dynamic Flowgraph Methodology (DFM) and its application in the dependability and assurance analysis of software-based control systems. The features of the methodology and full-scale examples of application to both generic process and nuclear power plant control systems are presented and discussed in detail. The features of a workstation software tool developed to assist users in the application of DFM are also described.

Software Engineering Issues for Cyber-Physical Systems

DEFF Research Database (Denmark)

Al-Jaroodi, Jameela; Mohamed, Nader; Jawhar, Imad

2016-01-01

step; however, designing and implementing the right software to integrate and use them effectively is essential. The software facilitates better interfaces, more control and adds smart services, high flexibility and many other added values and features to the CPS. However, software development for CPS......Cyber-Physical Systems (CPS) provide many smart features for enhancing physical processes. These systems are designed with a set of distributed hardware, software, and network components that are embedded in physical systems and environments or attached to humans. Together they function seamlessly...... to offer specific functionalities or features that help enhance human lives, operations or environments. While different CPS components play important roles in a successful CPS development, the software plays the most important role among them. Acquiring and using high quality CPS components is the first...

A flexible and reusable software for real-time control applications at JET

International Nuclear Information System (INIS)

De Tommasi, G.; Piccolo, F.; Sartori, F.

2005-01-01

The fast growth of the JET real-time control network and the increasing demand for new systems have been the triggers that started the development of the JETRT software framework. This new architecture is designed for maximum reuse and is particularly suited for implementation of both real-time control and data acquisition systems in a complex experimental environment such as JET. Most of the software is the same in all applications independent of the platform. The varying part is the project specific algorithm, which is also compiled into a separate software component, in order to achieve a separation from the plant interface code. This design choice maximises the software reliability, reduces development costs and allows non-specialist programmers to contribute to the implementation of real-time projects. JETRT also provides an integrated set of debugging and testing tools, some of them well integrated with the Matlab environment. This feature besides the framework portability among different platforms allows to perform most of the test and validation phase on a desktop PC running Windows, significantly reducing the commissioning time of a new real-time system

Rosetta Ligand docking with flexible XML protocols.

Science.gov (United States)

Lemmon, Gordon; Meiler, Jens

2012-01-01

RosettaLigand is premiere software for predicting how a protein and a small molecule interact. Benchmark studies demonstrate that 70% of the top scoring RosettaLigand predicted interfaces are within 2Å RMSD from the crystal structure [1]. The latest release of Rosetta ligand software includes many new features, such as (1) docking of multiple ligands simultaneously, (2) representing ligands as fragments for greater flexibility, (3) redesign of the interface during docking, and (4) an XML script based interface that gives the user full control of the ligand docking protocol.

The NOvA software testing framework

International Nuclear Information System (INIS)

Tamsett, M; Group, C

2015-01-01

The NOvA experiment at Fermilab is a long-baseline neutrino experiment designed to study vε appearance in a vμ beam. NOvA has already produced more than one million Monte Carlo and detector generated files amounting to more than 1 PB in size. This data is divided between a number of parallel streams such as far and near detector beam spills, cosmic ray backgrounds, a number of data-driven triggers and over 20 different Monte Carlo configurations. Each of these data streams must be processed through the appropriate steps of the rapidly evolving, multi-tiered, interdependent NOvA software framework. In total there are greater than 12 individual software tiers, each of which performs a different function and can be configured differently depending on the input stream. In order to regularly test and validate that all of these software stages are working correctly NOvA has designed a powerful, modular testing framework that enables detailed validation and benchmarking to be performed in a fast, efficient and accessible way with minimal expert knowledge. The core of this system is a novel series of python modules which wrap, monitor and handle the underlying C++ software framework and then report the results to a slick front-end web-based interface. This interface utilises modern, cross-platform, visualisation libraries to render the test results in a meaningful way. They are fast and flexible, allowing for the easy addition of new tests and datasets. In total upwards of 14 individual streams are regularly tested amounting to over 70 individual software processes, producing over 25 GB of output files. The rigour enforced through this flexible testing framework enables NOvA to rapidly verify configurations, results and software and thus ensure that data is available for physics analysis in a timely and robust manner. (paper)

Development of Agile Practices in Romanian Software Community

Directory of Open Access Journals (Sweden)

Eduard BUDACU

2017-01-01

Full Text Available Agile Software Development (ASD promotes flexibility to change and emphasis the importance of individuals and interactions in producing software. The study presents the development of agile practices in Romanian software community. A literature review is conducted and the main agile methods are described. The characteristics of Romanian ICT sector is presented in relation with agile methodology. Practices are identified by a survey and an analysis on the groups of interests formed on Meetup website is performed. Future directions and development of agile practices is evaluated.

High-Level Design Space and Flexibility Exploration for Adaptive, Energy-Efficient WCDMA Channel Estimation Architectures

Directory of Open Access Journals (Sweden)

Zoltán Endre Rákossy

2012-01-01

Full Text Available Due to the fast changing wireless communication standards coupled with strict performance constraints, the demand for flexible yet high-performance architectures is increasing. To tackle the flexibility requirement, software-defined radio (SDR is emerging as an obvious solution, where the underlying hardware implementation is tuned via software layers to the varied standards depending on power-performance and quality requirements leading to adaptable, cognitive radio. In this paper, we conduct a case study for representatives of two complexity classes of WCDMA channel estimation algorithms and explore the effect of flexibility on energy efficiency using different implementation options. Furthermore, we propose new design guidelines for both highly specialized architectures and highly flexible architectures using high-level synthesis, to enable the required performance and flexibility to support multiple applications. Our experiments with various design points show that the resulting architectures meet the performance constraints of WCDMA and a wide range of options are offered for tuning such architectures depending on power/performance/area constraints of SDR.

Development of a New VLBI Data Analysis Software

Science.gov (United States)

Bolotin, Sergei; Gipson, John M.; MacMillan, Daniel S.

2010-01-01

We present an overview of a new VLBI analysis software under development at NASA GSFC. The new software will replace CALC/SOLVE and many related utility programs. It will have the capabilities of the current system as well as incorporate new models and data analysis techniques. In this paper we give a conceptual overview of the new software. We formulate the main goals of the software. The software should be flexible and modular to implement models and estimation techniques that currently exist or will appear in future. On the other hand it should be reliable and possess production quality for processing standard VLBI sessions. Also, it needs to be capable of processing observations from a fully deployed network of VLBI2010 stations in a reasonable time. We describe the software development process and outline the software architecture.

Digital image processing software system using an array processor

International Nuclear Information System (INIS)

Sherwood, R.J.; Portnoff, M.R.; Journeay, C.H.; Twogood, R.E.

1981-01-01

A versatile array processor-based system for general-purpose image processing was developed. At the heart of this system is an extensive, flexible software package that incorporates the array processor for effective interactive image processing. The software system is described in detail, and its application to a diverse set of applications at LLNL is briefly discussed. 4 figures, 1 table

Software Innovation in a Mission Critical Environment

Science.gov (United States)

Fredrickson, Steven

2015-01-01

Operating in mission-critical environments requires trusted solutions, and the preference for "tried and true" approaches presents a potential barrier to infusing innovation into mission-critical systems. This presentation explores opportunities to overcome this barrier in the software domain. It outlines specific areas of innovation in software development achieved by the Johnson Space Center (JSC) Engineering Directorate in support of NASA's major human spaceflight programs, including International Space Station, Multi-Purpose Crew Vehicle (Orion), and Commercial Crew Programs. Software engineering teams at JSC work with hardware developers, mission planners, and system operators to integrate flight vehicles, habitats, robotics, and other spacecraft elements for genuinely mission critical applications. The innovations described, including the use of NASA Core Flight Software and its associated software tool chain, can lead to software that is more affordable, more reliable, better modelled, more flexible, more easily maintained, better tested, and enabling of automation.

[Flexible print circuit technology application in biomedical engineering].

Science.gov (United States)

Jiang, Lihua; Cao, Yi; Zheng, Xiaolin

2013-06-01

Flexible print circuit (FPC) technology has been widely applied in variety of electric circuits with high precision due to its advantages, such as low-cost, high specific fabrication ability, and good flexibility, etc. Recently, this technology has also been used in biomedical engineering, especially in the development of microfluidic chip and microelectrode array. The high specific fabrication can help making microelectrode and other micro-structure equipment. And good flexibility allows the micro devices based on FPC technique to be easily packaged with other parts. In addition, it also reduces the damage of microelectrodes to the tissue. In this paper, the application of FPC technology in biomedical engineering is introduced. Moreover, the important parameters of FPC technique and the development trend of prosperous applications is also discussed.

Application of a path sensitizing method on automated generation of test specifications for control software

International Nuclear Information System (INIS)

Morimoto, Yuuichi; Fukuda, Mitsuko

1995-01-01

An automated generation method for test specifications has been developed for sequential control software in plant control equipment. Sequential control software can be represented as sequential circuits. The control software implemented in a control equipment is designed from these circuit diagrams. In logic tests of VLSI's, path sensitizing methods are widely used to generate test specifications. But the method generates test specifications at a single time only, and can not be directly applied to sequential control software. The basic idea of the proposed method is as follows. Specifications of each logic operator in the diagrams are defined in the software design process. Therefore, test specifications of each operator in the control software can be determined from these specifications, and validity of software can be judged by inspecting all of the operators in the logic circuit diagrams. Candidates for sensitized paths, on which test data for each operator propagates, can be generated by the path sensitizing method. To confirm feasibility of the method, it was experimentally applied to control software in digital control equipment. The program could generate test specifications exactly, and feasibility of the method was confirmed. (orig.) (3 refs., 7 figs.)

Flexibility and a Departmental Instructional Planning Model.

Science.gov (United States)

Miner, Norris

The flexibility of an educational program, institution, or system can be described as the ability of the unit to absorb negative responses, such as reductions in funding or enrollments, and continue to function in a viable manner. One approach to adjustment to such reductions is to effect cuts in personnel, current, and equipment spending. This…

Environmental equipment for usages of FEM software. ADVENTURE system user's guide

International Nuclear Information System (INIS)

Yamasaki, Ichirou; Yoshimura, Shinobu

2003-05-01

The community softwares, databases, and other various tools have been installed in the ITBL environment by the Office of ITBL Promotion as a common utility property for each research field. Among those softwares, Finite Element Method (FEM) code, Adventure (which was originally developed by Prof. Yoshimura, the University of Tokyo), is provided as one of structure analysis programs for ITBL users. The code is well known to possess a high performance ability for parallel processing, especially for massively parallel environments. In this report, a chain of processes for usages of the system as well as the installation method to PC cluster are described. (author)

Design and implementation of Skype USB user gateway software

Science.gov (United States)

Qi, Yang

2017-08-01

With the widespread application of VoIP, the client with private protocol becomes more and more popular. Skype is one of the representatives. How to connect Skype with PSTN just by Skype client has gradually become hot. This paper design and implement the software based on a kind of USB User Gateway. With the software Skype user can freely communicate with PSTN phone. FSM is designed as the core of the software, and Skype control is separated by the USB Gateway control. In this way, the communication becomes more flexible and efficient. In the actual user testing, the software obtains good results.

Combined cycle design flexibility in today's market

International Nuclear Information System (INIS)

DeRidder, W.N.; Knott, S.J.

1995-01-01

In the power generation industry, non utility generators (NUG's) comprise a significant portion of new generation growth as electricity demands exceed existing utility capacities. These NUG's are developed by customers with widely varying experiences; bankers, lawyers, architect engineers, original equipment manufacturers, and other organizations involved in such diverse industries as petrochemical, pulp and paper, and steel making. The demands of these customers can be significantly varied in terms of features such as capacity factor, operability, maintainability, equipment redundancy, acceptable design practices, and many others. In addition, both the utility and NUG industries demand flexibility due to external influences such as regulatory policies, environmental conditions new design technologies, and emerging global markets. All of these factors are subject to wide variation across different market regions and even within a given region. This paper discusses the development of a reference plant design approach which focuses on customer flexibility while maximizing the use of proven designs. This approach allows basic system designs to be modified in a modular fashion to meet the differing demands of utility and NUG customers

Modernising ATLAS Software Build Infrastructure

CERN Document Server

Gaycken, Goetz; The ATLAS collaboration

2017-01-01

In the last year ATLAS has radically updated its software development infrastructure hugely reducing the complexity of building releases and greatly improving build speed, flexibility and code testing. The first step in this transition was the adoption of CMake as the software build system over the older CMT. This required the development of an automated translation from the old system to the new, followed by extensive testing and improvements. This resulted in a far more standard build process that was married to the method of building ATLAS software as a series of 12 separate projects from SVN. We then proceeded with a migration of its code base from SVN to git. As the SVN repository had been structured to manage each package more or less independently there was no simple mapping that could be used to manage the migration into git. Instead a specialist set of scripts that captured the software changes across official software releases was developed. With some clean up of the repository and the policy of onl...

A briefing to verification and validation of computer software

International Nuclear Information System (INIS)

Zhang Aisen; Xie Yalian

2012-01-01

Nowadays, the computer equipment and information processing technology is coming into the engineering of instrument and process control. Owing to its convenient and other advantages, more and more utilities are more than happy to use it. After initial utilization in basic functional controlling, the computer equipment and information processing technology is widely used in safety critical control. Consequently, the people pay more attentions to the quality of computer software. How to assess and ensure its quality are the most concerned problems. The verification and validation technology of computer software are important steps to the quality assurance. (authors)

Longevity and Depreciation of Audiovisual Equipment.

Science.gov (United States)

Post, Richard

1987-01-01

Describes results of survey of media service directors at public universities in Ohio to determine the expected longevity of audiovisual equipment. Use of the Delphi technique for estimates is explained, results are compared with an earlier survey done in 1977, and use of spreadsheet software to calculate depreciation is discussed. (LRW)

PACMAN: PRIMA astrometric instrument software

Science.gov (United States)

Abuter, Roberto; Sahlmann, Johannes; Pozna, Eszter

2010-07-01

The dual feed astrometric instrument software of PRIMA (PACMAN) that is currently being integrated at the VLTI will use two spatially modulated fringe sensor units and a laser metrology system to carry out differential astrometry. Its software and hardware compromises a distributed system involving many real time computers and workstations operating in a synchronized manner. Its architecture has been designed to allow the construction of efficient and flexible calibration and observation procedures. In parallel, a novel scheme of integrating M-code (MATLAB/OCTAVE) with standard VLT (Very Large Telescope) control software applications had to be devised in order to support numerically intensive operations and to have the capacity of adapting to fast varying strategies and algorithms. This paper presents the instrument software, including the current operational sequences for the laboratory calibration and sky calibration. Finally, a detailed description of the algorithms with their implementation, both under M and C code, are shown together with a comparative analysis of their performance and maintainability.

Software for imaging phase-shift interference microscope

Science.gov (United States)

Malinovski, I.; França, R. S.; Couceiro, I. B.

2018-03-01

In recent years absolute interference microscope was created at National Metrology Institute of Brazil (INMETRO). The instrument by principle of operation is imaging phase-shifting interferometer (PSI) equipped with two stabilized lasers of different colour as traceable reference wavelength sources. We report here some progress in development of the software for this instrument. The status of undergoing internal validation and verification of the software is also reported. In contrast with standard PSI method, different methodology of phase evaluation is applied. Therefore, instrument specific procedures for software validation and verification are adapted and discussed.

Power-Consumption Measurements for LTE User Equipment

DEFF Research Database (Denmark)

Lauridsen, Mads

wireless communications test set and the Agilent N6705B DC power analyzer to establish a power consumption model for LTE user equipment (UE). The model is useful when you need to examine the UE battery life in system-level simulations. We will explain how the Agilent equipment can be used in manual tests......, but we do not discuss how to make automated tests (for example, using VEE software). In this application note, we analyze smartphones adhering to the 3GPP LTE standard [1]....

"You are free to set your own hours": governing worker productivity and health through flexibility and resilience.

Science.gov (United States)

MacEachen, Ellen; Polzer, Jessica; Clarke, Judy

2008-03-01

Flexible work is now endemic in modern economies. A growing literature both praises work flexibility for accommodating employees' needs and criticizes it for fueling contingency and job insecurity. Although studies have identified varied effects of flexible work, questions remain about the workplace dimensions of flexibility and how occupational workplace health is managed in these workplaces. This paper presents findings from a qualitative study of how managers in the computer software industry situate workplace flexibility and approach worker health. In-depth interviews were conducted with managers (and some workers) at 30 firms in Ontario, Canada. Using a critical discourse analysis approach, we examine managers' optimistic descriptions of flexibility which emphasize how flexible work contributes to workers' life balance. We then contrast this with managers' depictions of flexibility work practices as intense and inescapable. We suggest that the discourse of flexibility, and the work practices they foster, make possible and reinforce an increased intensity of work that is driven by the demands of technological pace and change that characterize the global information technology and computer software industries. Finally, we propose that flexible knowledge work has led to a re-framing of occupational health management involving a focus on what we call "strategies of resilience" that aim to buttress workers' capacities to withstand intensive and uncertain working conditions.

Progress report of the critical equipment monitoring system

International Nuclear Information System (INIS)

Pantis, M.J.

1984-01-01

The Philadelphia Electric Company has contracted with Energy Data Systems to develop a Critical Equipment Monitoring System for its Peach Bottom Nuclear Plant. This computerized system is designed to acquire and maintain accurate and timely status information on plant equipment. It will provide auditable record of plant and equipment transactions. Positive equipment identification and location will be provided. Errors in complex logical checking will be minimized. This system should reduce operator loading and improve operator communicatin with the plant personnel. Phase I of this system was installed at Peach Bottom Nuclear Station May 1982. It provides the necessary hardware and software to do check-off lists on critical plant systems. This paper describes some of the start-up and operational problems encountered

IM (Integrity Management) software must show flexibility to local codes

Energy Technology Data Exchange (ETDEWEB)

Brors, Markus [ROSEN Technology and Research Center GmbH (Germany); Diggory, Ian [Macaw Engineering Ltd., Northumberland (United Kingdom)

2009-07-01

There are many internationally recognized codes and standards, such as API 1160 and ASME B31.8S, which help pipeline operators to manage and maintain the integrity of their pipeline networks. However, operators in many countries still use local codes that often reflect the history of pipeline developments in their region and are based on direct experience and research on their pipelines. As pipeline companies come under increasing regulatory and financial pressures to maintain the integrity of their networks, it is important that operators using regional codes are able to benchmark their integrity management schemes against these international standards. Any comprehensive Pipeline Integrity Management System (PIMS) software package should therefore not only incorporate industry standards for pipeline integrity assessment but also be capable of implementing regional codes for comparison purposes. This paper describes the challenges and benefits of incorporating one such set of regional pipeline standards into ROSEN Asset Integrity Management Software (ROAIMS). (author)

Robotic Software Integration Using MARIE

Directory of Open Access Journals (Sweden)

Carle Côté

2006-03-01

Full Text Available This paper presents MARIE, a middleware framework oriented towards developing and integrating new and existing software for robotic systems. By using a generic communication framework, MARIE aims to create a flexible distributed component system that allows robotics developers to share software programs and algorithms, and design prototypes rapidly based on their own integration needs. The use of MARIE is illustrated with the design of a socially interactive autonomous mobile robot platform capable of map building, localization, navigation, tasks scheduling, sound source localization, tracking and separation, speech recognition and generation, visual tracking, message reading and graphical interaction using a touch screen interface.

40 CFR 63.1298 - Standards for slabstock flexible polyurethane foam production-HAP emissions from equipment cleaning.

Science.gov (United States)

2010-07-01

... polyurethane foam production-HAP emissions from equipment cleaning. 63.1298 Section 63.1298 Protection of... foam production—HAP emissions from equipment cleaning. Each owner or operator of a new or existing...(a)(1) shall not use a HAP or a HAP-based material as an equipment cleaner. ...

The control software framework of the web base

International Nuclear Information System (INIS)

Nakatani, Takeshi; Inamura, Yasuhiro; Ito, Takayoshi; Otomo, Toshiya

2015-01-01

Web browsers are one of the most platform-independent user interfaces. In particular, web pages created using responsive web design (RWD) are available for use on desktop and laptop computers, as well as tablet terminals and smart phones. We developed a common software framework, IROHA, for the instrument control system in the Materials and Life Science Experimental Facility at the Japan Proton Accelerator Research Complex to build a flexible and scalable system by adopting XML/HTTP. However, its user interface was platform-dependent, and we wanted it to be more user-friendly. In 2013, we developed the prototype of a new software framework, IROHA2, comprising several device control servers and an instrument management server, retaining the flexibility and scalability of IROHA. We also adopted the Bootstrap framework to create an RWD user interface for these servers. (author)

Specialized computer system to diagnose critical lined equipment

Science.gov (United States)

Yemelyanov, V. A.; Yemelyanova, N. Y.; Morozova, O. A.; Nedelkin, A. A.

2018-05-01

The paper presents data on the problem of diagnosing the lining condition at the iron and steel works. The authors propose and describe the structure of the specialized computer system to diagnose critical lined equipment. The relative results of diagnosing lining condition by the basic system and the proposed specialized computer system are presented. To automate evaluation of lining condition and support in making decisions regarding the operation mode of the lined equipment, the specialized software has been developed.

Design and construction of a air pollutant gases sampler equipment

International Nuclear Information System (INIS)

Gomez S, R.A.; Rodriguez, T.J.

1996-01-01

This thesis is about the sketch and construction of an equipment which samples contaminated gases in the air. The topic of this work, is to propose a solution for imported and national equipment. The solution consist on lower prices of imported and national equipment without loosing the accuracy and the precision of those now available. The investigation shows all process to sample gases and theirs measurement for which all the mechanical, electric and electronic equipment, and the necessary software for giving the results in a computerized way were outlined. With this work it was able to succeed in measurements with a national low price, accurate, reliable, programmable, completely automatic and easy to use. This equipment exceed in accuracy the Japanese and the american equipment

The software safety analysis based on SFTA for reactor power regulating system in nuclear power plant

International Nuclear Information System (INIS)

Liu Zhaohui; Yang Xiaohua; Liao Longtao; Wu Zhiqiang

2015-01-01

The digitalized Instrumentation and Control (I and C) system of Nuclear power plants can provide many advantages. However, digital control systems induce new failure modes that differ from those of analog control systems. While the cost effectiveness and flexibility of software is widely recognized, it is very difficult to achieve and prove high levels of dependability and safety assurance for the functions performed by process control software, due to the very flexibility and potential complexity of the software itself. Software safety analysis (SSA) was one way to improve the software safety by identify the system hazards caused by software failure. This paper describes the application of a software fault tree analysis (SFTA) at the software design phase. At first, we evaluate all the software modules of the reactor power regulating system in nuclear power plant and identify various hazards. The SFTA was applied to some critical modules selected from the previous step. At last, we get some new hazards that had not been identified in the prior processes of the document evaluation which were helpful for our design. (author)

Software-Defined Radio Demonstrators: An Example and Future Trends

Directory of Open Access Journals (Sweden)

Ronan Farrell

2009-01-01

Full Text Available Software-defined radio requires the combination of software-based signal processing and the enabling hardware components. In this paper, we present an overview of the criteria for such platforms and the current state of development and future trends in this area. This paper will also provide details of a high-performance flexible radio platform called the maynooth adaptable radio system (MARS that was developed to explore the use of software-defined radio concepts in the provision of infrastructure elements in a telecommunications application, such as mobile phone basestations or multimedia broadcasters.

artdaq: DAQ software development made simple

Science.gov (United States)

Biery, Kurt; Flumerfelt, Eric; Freeman, John; Ketchum, Wesley; Lukhanin, Gennadiy; Rechenmacher, Ron

2017-10-01

For a few years now, the artdaq data acquisition software toolkit has provided numerous experiments with ready-to-use components which allow for rapid development and deployment of DAQ systems. Developed within the Fermilab Scientific Computing Division, artdaq provides data transfer, event building, run control, and event analysis functionality. This latter feature includes built-in support for the art event analysis framework, allowing experiments to run art modules for real-time filtering, compression, disk writing and online monitoring. As art, also developed at Fermilab, is also used for offline analysis, a major advantage of artdaq is that it allows developers to easily switch between developing online and offline software. artdaq continues to be improved. Support for an alternate mode of running whereby data from some subdetector components are only streamed if requested has been added; this option will reduce unnecessary DAQ throughput. Real-time reporting of DAQ metrics has been implemented, along with the flexibility to choose the format through which experiments receive the reports; these formats include the Ganglia, Graphite and syslog software packages, along with flat ASCII files. Additionally, work has been performed investigating more flexible modes of online monitoring, including the capability to run multiple online monitoring processes on different hosts, each running its own set of art modules. Finally, a web-based GUI interface through which users can configure details of their DAQ system has been implemented, increasing the ease of use of the system. Already successfully deployed on the LArlAT, DarkSide-50, DUNE 35ton and Mu2e experiments, artdaq will be employed for SBND and is a strong candidate for use on ICARUS and protoDUNE. With each experiment comes new ideas for how artdaq can be made more flexible and powerful. The above improvements will be described, along with potential ideas for the future.

Operational planning optimization of steam power plants considering equipment failure in petrochemical complex

International Nuclear Information System (INIS)

Luo, Xianglong; Zhang, Bingjian; Chen, Ying; Mo, Songping

2013-01-01

Highlights: ► We develop a systematic programming methodology to address equipment failure. ► We classify different operation conditions into real periods and virtual periods. ► The formulated MILP models guarantee cost reduction and enough operation safety. ► The consideration of reserving operation redundancy is effective. - Abstract: One or more interconnected steam power plants (SPPs) are constructed in a petrochemical complex to supply utility energy to the process. To avoid large economic penalties or process shutdowns, these SPPs should be flexible and reliable enough to meet the process energy requirement under varying conditions. Unexpected utility equipment failure is inevitable and difficult to be predicted. Most of the conventional methods are based on the assumption that SPPs do not experience any kind of equipment failure. Unfortunately, a process shutdown cannot be avoided when equipment fails unexpectedly. In this paper, a systematic methodology is presented to minimize the total cost under normal conditions while reserving enough flexibility and safety for unexpected equipment failure conditions. The proposed method transforms the different conditions into real periods to indicate normal scenarios and virtual periods to indicate unexpected equipment failure scenarios. The optimization strategy incorporating various operation redundancy scheduling, the transition constraints from equipment failure conditions to normal conditions, and the boiler load increase behavior modeling are presented to save cost and guarantee operation safety. A detailed industrial case study shows that the proposed systematic methodology is effective and practical in coping with equipment failure conditions with only few additional cost penalties

Development of a smart-antenna test-bed, demonstrating software defined digital beamforming

NARCIS (Netherlands)

Kluwer, T.; Slump, Cornelis H.; Schiphorst, Roelof; Hoeksema, F.W.

2001-01-01

This paper describes a smart-antenna test-bed consisting of ‘common of the shelf’ (COTS) hardware and software defined radio components. The use of software radio components enables a flexible platform to implement and test mobile communication systems as a real-world system. The test-bed is

Practical open source software for libraries

CERN Document Server

Engard, Nicole

2010-01-01

Open source refers to an application whose source code is made available for use or modification as users see fit. This means libraries gain more flexibility and freedom than with software purchased with license restrictions. Both the open source community and the library world live by the same rules and principles. Practical Open Source Software for Libraries explains the facts and dispels myths about open source. Chapters introduce librarians to open source and what it means for libraries. The reader is provided with links to a toolbox full of freely available open source products to use in

Communication from the Permanent Mission of the Russian Federation to the International Atomic Energy Agency regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-08-04

The document reproduces the text of the Note Verbale received by the Director General of the IAEA from the Permanent Mission of the Russian Federation to the International Atomic Energy Agency providing information on the export policies and practices of the Government of the Russian Federation with respect to the export of nuclear-related dual-use equipment, materials, software and related technology.

Communication from the Permanent Mission of the Russian Federation to the International Atomic Energy Agency regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

International Nuclear Information System (INIS)

2000-01-01

The document reproduces the text of the Note Verbale received by the Director General of the IAEA from the Permanent Mission of the Russian Federation to the International Atomic Energy Agency providing information on the export policies and practices of the Government of the Russian Federation with respect to the export of nuclear-related dual-use equipment, materials, software and related technology

VISUAL: a software package for plotting data in the RADHEAT-V4 code system

International Nuclear Information System (INIS)

Sasaki, Toshihiko; Yamano, Naoki

1984-03-01

In this report, the features, the capabilities and the constitution of the VISUAL Software Package are presented. The one of the features is that the VISUAL provides a versatile graphic display tool to plot a wide variety of data of the RADHEAT-V4 code system. And the other is to enable a user to handle easily the executing data in the Conversational Management Mode named ''CMM''. The program adopts the adjustable dimension system to increase its flexibility. VISUAL generates two-dimensional drawing, contour line map and three dimensional drawing on TSS (Time Sharing System) digital graphic equipment, NLP (Nihongo Laser Printer) or COM(Computer Output Microfilm). It is easily possible to display the calculated and experimental data in a DATA-POOL by using these functions. The purpose of this report is to describe sufficient information to enable a user to use VISUAL profitabily. (author)

Plug-in Architecture for Software-Defined Radios, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The growing use in deep space of CubeSats is driving the need for small, flexible, full-featured telecom hardware like the Iris radio. The current Iris software is...

Software for the acquisition and proses of Gammagraphy images

International Nuclear Information System (INIS)

De la Hoz Olivera, J.; Hernandez Garcia, J.

1999-01-01

In Cuba, the piece of equipment most widespread in Gammagraphy studies is the rectilinear scanner. In the years 1997-98, all such equipment was coupled to the microcomputer by specialists from Nuclear Research and Service Center and Marie Curie Oncological Hospital, both in Camaguey city. The results went beyond expectations, which allowed for the continuation of work in these departments with quality higher than that of the original version. This paper describes the software for acquiring and processing the images. The acquisition software is a wizard application that guides technicians through the different steps of the study and allows for the use of the computer in other tasks during the study. MDI (Multiple Document Interface) is the image processing software, which makes it possible for technicians to simultaneously visualize several studies for comparison, to apply several image processing techniques, to insert comments on the study and to show anatomical marks, to mention only a few advantages. The software were developed in Delphi 3.0 for Windows 95 or higher

A Flexible Framework for Magnetic Measurements

CERN Document Server

Inglese, V; Buzio, M

2009-01-01

The work presented in this Ph.D. thesis covers the specification, design, prototyping, and validation of a new version of a magnetic measurement control, acquisition, and data analysis software package: the Flexible Framework for Magnetic Measurements (FFMM). FFMM constitutes the software part of the new platform for magnetic measurements, including also new high-performance hardware, developed at the European Organization for Nuclear Research (CERN) in cooperation with the Department of Engineering of the University of Sannio. FFMM is conceived as a unified solution to drive all the existing and future park of measurement systems (mainly magnetic but also optical, mechanical, etc.). The effort for the series test of the LHC superconducting magnets highlighted limitations in the measurement control and acquisition programs, mainly associated with the relatively long time needed for a development iteration (the cycle of specification-programming-debugging-validation). Moreover, the software capabilities needed...

Object oriented reconstruction software for the Instrumented Flux Return of BABAR

CERN Document Server

Nardo, E D; Lista, L

2001-01-01

BABAR experiment is the first High Energy Physics experiment to extensively use object oriented technology and the C++ programming language for online and offline software. Object orientation permits to reach a high level of flexibility and maintainability of the code, which is a key point in a large project with many developers. These goals are reached with the introduction of reusable code elements, with abstraction of code behaviours and polymorphism. Software design, before code implementation, is the key task that determines the achievement of such a goal. We present the experience with the application of object oriented technology and design patterns to the reconstruction software of the Instrumented Flux Return detector of BABAR experiment. The use of abstract interfaces improved the development of reconstruction code and permitted to flexibly apply modification to reconstruction strategies, and eventually to reduce the maintenance load. The experience during the last years of development is presented....

THE MODULE--A NEW MODE FOR GAINING FLEXIBILITY.

Science.gov (United States)

PALMER, L. R.

FLEXIBLE SCHEDULING BENEFITS BOTH STUDENTS AND TEACHERS BECAUSE, IN ANY SPECIFIC SCHOOLS EDUCATIONAL PROGRAM, IT MAKES THE BEST AND MOST APPROPRIATE USE OF TIME, SPACE, EQUIPMENT, AND TEACHERS TALENTS. SUCH SCHEDULING HAS BEEN USED SUCCESSFULLY AT MINNETONKA EAST JUNIOR HIGH SCHOOL, WHERE THE SCHOOL DAY IS DIVIDED INTO 15 DAILY TIME MODULES OF 28…

75 FR 27341 - Increasing Market and Planning Efficiency Through Improved Software; Notice of Technical...

Science.gov (United States)

2010-05-14

..., ramp rates, and network topology), flexible dispatch, settlement calculations, transmission switching... Market and Planning Efficiency Through Improved Software; Notice of Technical Conference To Discuss Increasing Market and Planning Efficiency Through Improved Software May 7, 2010. Take notice that Commission...

Software Geometry in Simulations

Science.gov (United States)

Alion, Tyler; Viren, Brett; Junk, Tom

2015-04-01

The Long Baseline Neutrino Experiment (LBNE) involves many detectors. The experiment's near detector (ND) facility, may ultimately involve several detectors. The far detector (FD) will be significantly larger than any other Liquid Argon (LAr) detector yet constructed; many prototype detectors are being constructed and studied to motivate a plethora of proposed FD designs. Whether it be a constructed prototype or a proposed ND/FD design, every design must be simulated and analyzed. This presents a considerable challenge to LBNE software experts; each detector geometry must be described to the simulation software in an efficient way which allows for multiple authors to easily collaborate. Furthermore, different geometry versions must be tracked throughout their use. We present a framework called General Geometry Description (GGD), written and developed by LBNE software collaborators for managing software to generate geometries. Though GGD is flexible enough to be used by any experiment working with detectors, we present it's first use in generating Geometry Description Markup Language (GDML) files to interface with LArSoft, a framework of detector simulations, event reconstruction, and data analyses written for all LAr technology users at Fermilab. Brett is the other of the framework discussed here, the General Geometry Description (GGD).

Clinical software for MR imaging system, 4

International Nuclear Information System (INIS)

Shimizu, Koji; Kasai, Akira; Okamura, Shoichi

1992-01-01

Magnetic resonance imaging continues to elicit new application software through the recent technological advances of MR equipment. This paper describes several applications of our newly developed clinical software. The fast SE sequence (RISE) has proved to reduce routine examination time and to improve image quality, and ultra-fast FE sequence (SMASH) was found to extend the diagnostic capabilities in the field of cardiac study. Diffusion/perfusion imaging achieved in our MR system showed significant promise for providing novel information regarding tissue characterization. Furthermore, Image quality and practicalities of MR angiography have been improved by advanced imaging sequences and sophisticated post-processing software. (author)

Software configuration management plan, 241-AY and 241-AZ tank farm MICON automation system

International Nuclear Information System (INIS)

Hill, L.F.

1997-01-01

This document establishes a Computer Software Configuration Management Plan (CSCM) for controlling software for the MICON Distributed Control System (DCS) located at the 241-AY and 241-AZ Aging Waste Tank Farm facilities in the 200 East Area. The MICON DCS software controls and monitors the instrumentation and equipment associated with plant systems and processes. A CSCM identifies and defines the configuration items in a system (section 3.1), controls the release and change of these items throughout the system life cycle (section 3.2), records and reports the status of configuration items and change requests (section 3.3), and verifies the completeness and correctness of the items (section 3.4). All software development before initial release, or before software is baselined, is considered developmental. This plan does not apply to developmental software. This plan applies to software that has been baselined and released. The MICON software will monitor and control the related instrumentation and equipment of the 241-AY and 241-AZ Tank Farm ventilation systems. Eventually, this software may also assume the monitoring and control of the tank sludge washing equipment and other systems as they are brought on line. This plan applies to the System Cognizant Manager and MICON Cognizant Engineer (who is also referred to herein as the system administrator) responsible for the software/hardware and administration of the MICON system. This document also applies to any other organizations within Tank Farms which are currently active on the system including system cognizant engineers, nuclear operators, technicians, and control room supervisors

EMMA: a new paradigm in configurable software

International Nuclear Information System (INIS)

Nogiec, J. M.; Trombly-Freytag, K.

2017-01-01

EMMA is a framework designed to create a family of configurable software systems, with emphasis on extensibility and flexibility. It is based on a loosely coupled, event driven architecture. The EMMA framework has been built upon the premise of composing software systems from independent components. It opens up opportunities for reuse of components and their functionality and composing them together in many different ways. As a result, it provides the developer of test and measurement applications with a lightweight alternative to microservices, while sharing their various advantages, including composability, loose coupling, encapsulation, and reuse.

EMMA: a new paradigm in configurable software

Science.gov (United States)

Nogiec, J. M.; Trombly-Freytag, K.

2017-10-01

EMMA is a framework designed to create a family of configurable software systems, with emphasis on extensibility and flexibility. It is based on a loosely coupled, event driven architecture. The EMMA framework has been built upon the premise of composing software systems from independent components. It opens up opportunities for reuse of components and their functionality and composing them together in many different ways. It provides the developer of test and measurement applications with a lightweight alternative to microservices, while sharing their various advantages, including composability, loose coupling, encapsulation, and reuse.

Planetarium Software in the Classroom

Science.gov (United States)

Persson, J. R.; Eriksson, U.

2016-01-01

Students often find astronomy and astrophysics to be most interesting and exciting, but the Universe is difficult to access using only one's eyes or simple equipment available at different educational settings. To open up the Universe and enhance learning astronomy and astrophysics different planetarium software can be used. In this article we…

Designing Scientific Software for Heterogeneous Computing

DEFF Research Database (Denmark)

Glimberg, Stefan Lemvig

, algorithms and data structures must be designed to utilize the underlying parallel architecture. The architectural changes in hardware design within the last decade, from single to multi and many-core architectures, require software developers to identify and properly implement methods that both exploit...... makes parallel software design applicable, but also a challenge for scientific software developers at all levels. We have developed a generic C++ library for fast prototyping of large-scale PDEs solvers based on flexible-order finite difference approximations on structured regular grids. The library...... is designed with a high abstraction interface to improve developer productivity. The library is based on modern template-based design concepts as described in Glimberg, Engsig-Karup, Nielsen & Dammann (2013). The library utilizes heterogeneous CPU/GPU environments in order to maximize computational throughput...

Study and development of equipment supervision technique system and its management software for nuclear electricity production

International Nuclear Information System (INIS)

Zhang Liying; Zou Pingguo; Zhu Chenghu; Lu Haoliang; Wu Jie

2008-01-01

The equipment supervision technique system, which standardized the behavior of supervision organizations in planning and implementing of equipment supervision, is built up based on equipment supervision technique documents, such as Quality Supervision Classifications, Special Supervision Plans and Supervision Guides. Furthermore, based on the research, the equipment supervision management information system is developed by Object Oriented Programming, which consists of supervision information, supervision technique, supervision implementation, quality statistics and analysis module. (authors)

A Practical Introduction to HardwareSoftware Codesign

CERN Document Server

Schaumont, Patrick R

2013-01-01

This textbook provides an introduction to embedded systems design, with emphasis on integration of custom hardware components with software. The key problem addressed in the book is the following: how can an embedded systems designer strike a balance between flexibility and efficiency? The book describes how combining hardware design with software design leads to a solution to this important computer engineering problem. The book covers four topics in hardware/software codesign: fundamentals, the design space of custom architectures, the hardware/software interface and application examples. The book comes with an associated design environment that helps the reader to perform experiments in hardware/software codesign. Each chapter also includes exercises and further reading suggestions. Improvements in this second edition include labs and examples using modern FPGA environments from Xilinx and Altera, which make the material applicable to a greater number of courses where these tools are already in use.  Mo...

Optimisation of the DQM software

CERN Document Server

Simetka, Vojtech

2014-01-01

The Data Quality Monitoring (DQM) Software proved to be a central tool in the CMS experiment. Its flexibility allowed its integration in several environments: Online, for real-time detector monitoring; Offline, for the final, fine-grained Data Certification; Release Validation, to constantly validate the functionality and the performance of the reconstruction soft- ware; in Monte Carlo productions [1, 2, 3]. The resources used by the different DQM software systems, both in terms of time and memory, are ever-growing. Having in mind the next to come LHC phases, the improvement of the perfor- mance of the DQM and Validation code will make possible the validation of extreme condition scenarios (events with high number of pileup vertices).

The Orion GN and C Data-Driven Flight Software Architecture for Automated Sequencing and Fault Recovery

Science.gov (United States)

King, Ellis; Hart, Jeremy; Odegard, Ryan

2010-01-01

The Orion Crew Exploration Vehicle (CET) is being designed to include significantly more automation capability than either the Space Shuttle or the International Space Station (ISS). In particular, the vehicle flight software has requirements to accommodate increasingly automated missions throughout all phases of flight. A data-driven flight software architecture will provide an evolvable automation capability to sequence through Guidance, Navigation & Control (GN&C) flight software modes and configurations while maintaining the required flexibility and human control over the automation. This flexibility is a key aspect needed to address the maturation of operational concepts, to permit ground and crew operators to gain trust in the system and mitigate unpredictability in human spaceflight. To allow for mission flexibility and reconfrgurability, a data driven approach is being taken to load the mission event plan as well cis the flight software artifacts associated with the GN&C subsystem. A database of GN&C level sequencing data is presented which manages and tracks the mission specific and algorithm parameters to provide a capability to schedule GN&C events within mission segments. The flight software data schema for performing automated mission sequencing is presented with a concept of operations for interactions with ground and onboard crew members. A prototype architecture for fault identification, isolation and recovery interactions with the automation software is presented and discussed as a forward work item.

Application Software for the Cabinet Operator Module of the Reactor Protection System

International Nuclear Information System (INIS)

Lee, Hyun-Chul; Jung, Hae-Won; Lee, Sung-Jin; Koo, Young-Ho; Kim, Seong-Tae; Kwak, Tae-Kil; Jin, Kyo-Hong

2006-01-01

A reactor protection system (RPS) plays the roles of generating the reactor trip signal and the engineered safety features (ESF) actuation signal when the monitored plant processes reach predefined limits. A Korean project group, so-called KNICS (Korean Nuclear I and C System), is developing a new digitalized RPS and the Cabinet Operator Module (COM) of the RPS which is used for the RPS integrity testing and monitoring by equipment operators. A flat panel display (FPD) with a touch screen capability is provided as a main user interface for the RPS. This paper shows the application software developed for the COM FPD. Equipment operators can monitor the status of the RPS and carry out various tests to verify system functions by means of the application software. A qualified hardware and software development environment are used to develop the application software

Large Scale Software Building with CMake in ATLAS

CERN Document Server

Elmsheuser, Johannes; The ATLAS collaboration; Obreshkov, Emil; Undrus, Alexander

2016-01-01

The offline software of the ATLAS experiment at the LHC (Large Hadron Collider) serves as the platform for detector data reconstruction, simulation and analysis. It is also used in the detector trigger system to select LHC collision events during data taking. ATLAS offline software consists of several million lines of C++ and Python code organized in a modular design of more than 2000 specialized packages. Because of different workflows many stable numbered releases are in parallel production use. To accommodate specific workflow requests, software patches with modified libraries are distributed on top of existing software releases on a daily basis. The different ATLAS software applications require a flexible build system that strongly supports unit and integration tests. Within the last year this build system was migrated to CMake. A CMake configuration has been developed that allows one to easily set up and build the mentioned software packages. This also makes it possible to develop and test new and modifi...

Large scale software building with CMake in ATLAS

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00218447; The ATLAS collaboration; Elmsheuser, Johannes; Obreshkov, Emil; Undrus, Alexander

2017-01-01

The offline software of the ATLAS experiment at the LHC (Large Hadron Collider) serves as the platform for detector data reconstruction, simulation and analysis. It is also used in the detector trigger system to select LHC collision events during data taking. ATLAS offline software consists of several million lines of C++ and Python code organized in a modular design of more than 2000 specialized packages. Because of different workflows many stable numbered releases are in parallel production use. To accommodate specific workflow requests, software patches with modified libraries are distributed on top of existing software releases on a daily basis. The different ATLAS software applications require a flexible build system that strongly supports unit and integration tests. Within the last year this build system was migrated to CMake. A CMake configuration has been developed that allows one to easily set up and build the mentioned software packages. This also makes it possible to develop and test new and modifi...

Research of real-time communication software

Science.gov (United States)

Li, Maotang; Guo, Jingbo; Liu, Yuzhong; Li, Jiahong

2003-11-01

Real-time communication has been playing an increasingly important role in our work, life and ocean monitor. With the rapid progress of computer and communication technique as well as the miniaturization of communication system, it is needed to develop the adaptable and reliable real-time communication software in the ocean monitor system. This paper involves the real-time communication software research based on the point-to-point satellite intercommunication system. The object-oriented design method is adopted, which can transmit and receive video data and audio data as well as engineering data by satellite channel. In the real-time communication software, some software modules are developed, which can realize the point-to-point satellite intercommunication in the ocean monitor system. There are three advantages for the real-time communication software. One is that the real-time communication software increases the reliability of the point-to-point satellite intercommunication system working. Second is that some optional parameters are intercalated, which greatly increases the flexibility of the system working. Third is that some hardware is substituted by the real-time communication software, which not only decrease the expense of the system and promotes the miniaturization of communication system, but also aggrandizes the agility of the system.

Determination of flexibility factors in curved pipes with end restraints using a semi-analytic formulation

International Nuclear Information System (INIS)

Fonseca, E.M.M.; Melo, F.J.M.Q. de; Oliveira, C.A.M.

2002-01-01

Piping systems are structural sets used in the chemical industry, conventional or nuclear power plants and fluid transport in general-purpose process equipment. They include curved elements built as parts of toroidal thin-walled structures. The mechanical behaviour of such structural assemblies is of leading importance for satisfactory performance and safety standards of the installations. This paper presents a semi-analytic formulation based on Fourier trigonometric series for solving the pure bending problem in curved pipes. A pipe element is considered as a part of a toroidal shell. A displacement formulation pipe element was developed with Fourier series. The solution of this problem is solved from a system of differential equations using mathematical software. To build-up the solution, a simple but efficient deformation model, from a semi-membrane behaviour, was followed here, given the geometry and thin shell assumption. The flexibility factors are compared with the ASME code for some elbow dimensions adopted from ISO 1127. The stress field distribution was also calculated

40 CFR 63.1296 - Standards for slabstock flexible polyurethane foam production-HAP ABA equipment leaks.

Science.gov (United States)

2010-07-01

... polyurethane foam production-HAP ABA equipment leaks. 63.1296 Section 63.1296 Protection of Environment... production—HAP ABA equipment leaks. Each owner or operator of a new or existing slabstock affected source complying with the emission point specific limitation option provided in § 63.1293(a) shall control HAP ABA...

The CMS Data Quality Monitoring software experience and future improvements

CERN Document Server

Batinkov, Atanas Ivanov

2013-01-01

The Data Quality Monitoring Software proved to be a central tool in the Compact Muon Solenoid experiment. Its flexibility allowed its integration in several environments: online, for real-time detector monitoring; offline, for the final, fine-grained data certification. The usage of the Data Quality Monitoring software in the different environments and its integration in the Compact Muon Solenoid reconstruction software framework and in all production workflows are presented. The main technical challenges and the adopted solutions to them will be also discussed with emphasis on functionality, long-term robustness and performance.

The CMS Data Quality Monitoring software experience and future improvements

CERN Document Server

De Guio, Federico

2013-01-01

The Data Quality Monitoring (DQM) Software proved to be a central tool in the CMS experiment. Its flexibility allowed its integration in several environments Online, for real-time detector monitoring; Offline, for the final, fine-grained Data Certification; Release Validation, to constantly validate the functionality and the performance of the reconstruction software; in Monte Carlo productions. The central tool to deliver Data Quality information is a web site for browsing data quality histograms (DQM GUI). In this contribution the usage of the DQM Software in the different environments and its integration in the CMS Reconstruction Software Framework and in all production workflows are presented.

Study of trunk flexibility and body composition between football and badminton players

Directory of Open Access Journals (Sweden)

NANDALAL SINGH

2011-04-01

Full Text Available The purpose of the present study was an attempt to compare the flexibility (trunk flexibility and bodycomposition (percentage of body fat, total body fat and lean body mass between inter-college level malefootball and badminton players. Fifty (50 male inter-college level football players (N=25 and badmintonplayers (N=25 ranging between 17 to 25years were selected randomly from different colleges of PanjabUniversity, Chandigarh for this study. To compare the mean differences between the inter-college level footballand badminton players,t tests were computed using SPSS Software. Flexibility (trunk flexibility, and bodycomposition (percentage of body fat and total body fat were not found to be statistically significant

A IF Signal Precessing System Design Based on Software Radio Platform

Directory of Open Access Journals (Sweden)

Zhao Jing

2018-01-01

Full Text Available Software radio is a definition of a design thought about how to implement flexible functions by using fixed hardware platform. Any platform based on this is characterized to be universal, standardized, modular, open and highly flexible. Due to some realistic reasons, a software radio platform is hard to be realized. So, most signal processing is operated after mixing. According to software radio requirements, a “FPGA+ADC+DAC” structure is designed. Compared with former processors, this module has broad application prospects with the small size, low power, configurable and programmable feathers. It has multifunction, such as generating IF signals, performing digital down conversion and realizing the synchronous demodulation and the other functions. This module also provides the extended host interface to communicate with upper computers. According to the practical test, take MSK signal for example, if the bit rate is 1Mb/s, bit error rate is lower than 10-6.

Towards interoperability of energy management systems using flexibility through conceptual modeling

NARCIS (Netherlands)

Rumph, F.J.; Huitema, G.B.; Verhoosel, J.

2013-01-01

Smart Grid technologies are being developed to better operate the power system and integrate larger amounts of renewable intermittent power sources and new energy efficient electrical equipment. Coordinating flexibilities in power supply and demand plays a crucial role in this development.

Experience with case tools in the design of process-oriented software

Science.gov (United States)

Novakov, Ognian; Sicard, Claude-Henri

1994-12-01

In Accelerator systems such as the CERN PS complex, process equipment has a life time which may exceed the typical life cycle of its related software. Taking into account the variety of such equipment, it is important to keep the analysis and design of the software in a system-independent form. This paper discusses the experience gathered in using commercial CASE tools for analysis, design and reverse engineering of different process-oriented software modules, with a principal emphasis on maintaining the initial analysis in a standardized form. Such tools have been in existence for several years, but this paper shows that they are not fully adapted to our needs. In particular, the paper stresses the problems of integrating such a tool into an existing data-base-dependent development chain, the lack of real-time simulation tools and of Object-Oriented concepts in existing commercial packages. Finally, the paper gives a broader view of software engineering needs in our particular context.

How to Perform a Powder in Flexible Die Test

DEFF Research Database (Denmark)

Hancock, Mike; Nielsen, Morten Storgaard

The “Powder in Flexible Die”-test, or PFD-test for short, proposes a new way of testing plastic properties of granular materials. The principal idea for the test originates from Dr. J.I Bech. The test has since been developed further and refined at IPL-DTU. The present work describes the equipment...

Flexible Delivery Approach in Architecture and Construction Management Course

Science.gov (United States)

Chan, Eric

2013-01-01

The millennial generation is facing challenges in their career path and they believe that tertiary education can help them to equip better to tackle against. However, some students find it difficult to rush back to classroom due to work commitment. Fortunately, flexible education developed these years allows students to capture knowledge anytime…

Project management in nuclear equipment manufacture

International Nuclear Information System (INIS)

Liu Jiancheng

2005-01-01

The completion of the management organization shall be firstly considered in project management for a nuclear power plant. The organization of nuclear equipment quality assurance program and project management consists of 5 departments such as the nuclear power container department, the manufacture department and the quality assurance department. The general manager takes the overall responsibility for the quality of the nuclear press usr bearing equipment, and the vice general manager takes responsibility for the quality, technology and schedule related with the manufacture of the equipment, and organizes the organization department for the audit. The director of the quality assurance department takes the responsibility for the establishment and completion of the quality assurance program, with enough rights authorized by the general manager, including the right not bounded by the cost and schedule, and confirms the implementation of the program by related departments and personnel. The manufacture schedule shall be prepared to ensure the implementation feasibility, process continuity and flexibility. The schedule shall be followed and monitored for the whole process, to check and feedback the implementation. (authors)

MPLM On-Orbit Interface Dynamic Flexibility Modal Test

Science.gov (United States)

Bookout, Paul S.; Rodriguez, Pedro I.; Tinson, Ian; Fleming, Paolo

2001-01-01

Now that the International Space Station (ISS) is being constructed, payload developers have to not only verify the Shuttle-to-payload interface, but also the interfaces their payload will have with the ISS. The Multi Purpose Logistic Module (MPLM) being designed and built by Alenia Spazio in Torino, Italy is one such payload. The MPLM is the primary carrier for the ISS Payload Racks, Re-supply Stowage Racks, and the Resupply Stowage Platforms to re-supply the ISS with food, water, experiments, maintenance equipment and etc. During the development of the MPLM there was no requirement for verification of the on-orbit interfaces with the ISS. When this oversight was discovered, all the dynamic test stands had already been disassembled. A method was needed that would not require an extensive testing stand and could be completed in a short amount of time. The residual flexibility testing technique was chosen. The residual flexibility modal testing method consists of measuring the free-free natural frequencies and mode shapes along with the interface frequency response functions (FRF's). Analytically, the residual flexibility method has been investigated in detail by, MacNeal, Martinez, Carne, and Miller, and Rubin, but has not been implemented extensively for model correlation due to difficulties in data acquisition. In recent years improvement of data acquisition equipment has made possible the implementation of the residual flexibility method as in Admire, Tinker, and Ivey, and Klosterman and Lemon. The residual flexibility modal testing technique is applicable to a structure with distinct points (DOF) of contact with its environment, such as the MPLM-to-Station interface through the Common Berthing Mechanism (CBM). The CBM is bolted to a flange on the forward cone of the MPLM. During the fixed base test (to verify Shuttle interfaces) some data was gathered on the forward cone panels. Even though there was some data on the forward cones, an additional modal test was

Review of Software Reliability Assessment Methodologies for Digital I and C Software of Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Cho, Jae Hyun; Lee, Seung Jun; Jung, Won Dea [KAERI, Daejeon (Korea, Republic of)

2014-08-15

Digital instrumentation and control (I and C) systems are increasingly being applied to current nuclear power plants (NPPs) due to its advantages; zero drift, advanced data calculation capacity, and design flexibility. Accordingly, safety issues of software that is main part of the digital I and C system have been raised. As with hardware components, the software failure in NPPs could lead to a large disaster, therefore failure rate test and reliability assessment of software should be properly performed, and after that adopted in NPPs. However, the reliability assessment of the software is quite different with that of hardware, owing to the nature difference between software and hardware. The one of the most different thing is that the software failures arising from design faults as 'error crystal', whereas the hardware failures are caused by deficiencies in design, production, and maintenance. For this reason, software reliability assessment has been focused on the optimal release time considering the economy. However, the safety goal and public acceptance of the NPPs is so distinctive with other industries that the software in NPPs is dependent on reliability quantitative value rather than economy. The safety goal of NPPs compared to other industries is exceptionally high, so conventional methodologies on software reliability assessment already used in other industries could not adjust to safety goal of NPPs. Thus, the new reliability assessment methodology of the software of digital I and C on NPPs need to be developed. In this paper, existing software reliability assessment methodologies are reviewed to obtain the pros and cons of them, and then to assess the usefulness of each method to software of NPPs.

Review of Software Reliability Assessment Methodologies for Digital I and C Software of Nuclear Power Plants

International Nuclear Information System (INIS)

Cho, Jae Hyun; Lee, Seung Jun; Jung, Won Dea

2014-01-01

Digital instrumentation and control (I and C) systems are increasingly being applied to current nuclear power plants (NPPs) due to its advantages; zero drift, advanced data calculation capacity, and design flexibility. Accordingly, safety issues of software that is main part of the digital I and C system have been raised. As with hardware components, the software failure in NPPs could lead to a large disaster, therefore failure rate test and reliability assessment of software should be properly performed, and after that adopted in NPPs. However, the reliability assessment of the software is quite different with that of hardware, owing to the nature difference between software and hardware. The one of the most different thing is that the software failures arising from design faults as 'error crystal', whereas the hardware failures are caused by deficiencies in design, production, and maintenance. For this reason, software reliability assessment has been focused on the optimal release time considering the economy. However, the safety goal and public acceptance of the NPPs is so distinctive with other industries that the software in NPPs is dependent on reliability quantitative value rather than economy. The safety goal of NPPs compared to other industries is exceptionally high, so conventional methodologies on software reliability assessment already used in other industries could not adjust to safety goal of NPPs. Thus, the new reliability assessment methodology of the software of digital I and C on NPPs need to be developed. In this paper, existing software reliability assessment methodologies are reviewed to obtain the pros and cons of them, and then to assess the usefulness of each method to software of NPPs

CMS software and computing for LHC Run 2

CERN Document Server

INSPIRE-00067576

2016-11-09

The CMS offline software and computing system has successfully met the challenge of LHC Run 2. In this presentation, we will discuss how the entire system was improved in anticipation of increased trigger output rate, increased rate of pileup interactions and the evolution of computing technology. The primary goals behind these changes was to increase the flexibility of computing facilities where ever possible, as to increase our operational efficiency, and to decrease the computing resources needed to accomplish the primary offline computing workflows. These changes have resulted in a new approach to distributed computing in CMS for Run 2 and for the future as the LHC luminosity should continue to increase. We will discuss changes and plans to our data federation, which was one of the key changes towards a more flexible computing model for Run 2. Our software framework and algorithms also underwent significant changes. We will summarize the our experience with a new multi-threaded framework as deployed on ou...

Industrial Mining's flexibility aids in customer satisfaction

Energy Technology Data Exchange (ETDEWEB)

1985-08-01

Mining flexibility and customer specification keeps Industrial Mining of Youngstown, Ohio competitive in a tough environment. The company fills the needs of the small customer who requires a special blend or sized product. Industrial Mining works terrain that was uneconomical to mine before but is now profitable. Draglines and mobile equipment are used for overburden removal for economical and flexible mining with most mining by the contour method. Industrial Mining's preparation plant was constructed in 1979 to enable the company to wash and screen different stoker products and utility coal with a modern on-site lab a quality product can be constantly maintained. A wheel loader is used to feed the hopper from selective stockpiles and this allows blending on the raw side or within the plant.

Procedural Optimization Models for Multiobjective Flexible JSSP

Directory of Open Access Journals (Sweden)

Elena Simona NICOARA

2013-01-01

Full Text Available The most challenging issues related to manufacturing efficiency occur if the jobs to be sched-uled are structurally different, if these jobs allow flexible routings on the equipments and mul-tiple objectives are required. This framework, called Multi-objective Flexible Job Shop Scheduling Problems (MOFJSSP, applicable to many real processes, has been less reported in the literature than the JSSP framework, which has been extensively formalized, modeled and analyzed from many perspectives. The MOFJSSP lie, as many other NP-hard problems, in a tedious place where the vast optimization theory meets the real world context. The paper brings to discussion the most optimization models suited to MOFJSSP and analyzes in detail the genetic algorithms and agent-based models as the most appropriate procedural models.

A comprehensive Software Copy Protection and Digital Rights Management platform

Directory of Open Access Journals (Sweden)

Ayman Mohammad Bahaa-Eldin

2014-09-01

Full Text Available This article proposes a Powerful and Flexible System for Software Copy Protection (SCP and Digital Rights Management (DRM based on Public Key Infrastructure (PKI standards. Software protection is achieved through a multi-phase methodology with both static and dynamic processing of the executable file. The system defeats most of the attacks and cracking techniques and makes sure that the protected software is never in a flat form, with a suitable portion of it always being encrypted during execution. A novel performance-tuning algorithm is proposed to lower the overhead of the protection process to its minimum depending on the software dynamic execution behavior. All system calls to access resources and objects such as files, and input/output devices are intercepted and encapsulated with secure rights management code to enforce the required license model. The system can be integrated with hardware authentication techniques (like dongles, and to Internet based activation and DRM servers over the cloud. The system is flexible to apply any model of licensing including state-based license such as expiration dates and number of trials. The usage of a standard markup language (XrML to describe the license makes it easier to apply new licensing operations like re-sale and content rental.

Detect-PC Software Version 3.0

International Nuclear Information System (INIS)

Arista Romeu, E. J.

2011-01-01

The 'Thyroid uptake system Detect-PC' developed and manufactured at CEADEN is object of follow-up by its manufacturer in order to fulfill the established national requirements to medical equipment. Taking into account observations from the users of the system, several modifications were implemented that resulted in a new software version, the 3.0.0. These modifications were mainly introduced to easy carrying out the energetic calibration of the system. In this new version all the working modes of the system were thoroughly tested and a Medic Physics was trained in the use of the application software. Acceptance tests were carried out in a thyroid uptake system installed in the Hermanos Ameijeiras Hospital, where this version of the software remained installed and in operation. (Author)

Safe Software for Space Applications: Building on the DO-178 Experience

Science.gov (United States)

Dorsey, Cheryl A.; Dorsey, Timothy A.

2013-09-01

DO-178, Software Considerations in Airborne Systems and Equipment Certification, is the well-known international standard dealing with the assurance of software used in airborne systems [1,2]. Insights into the DO-178 experiences, strengths and weaknesses can benefit the international space community. As DO-178 is an excellent standard for safe software development when used appropriately, this paper provides lessons learned and suggestions for using it effectively.

Identification of critical factors affecting flexibility in hospital construction projects.

Science.gov (United States)

Olsson, Nils E O; Hansen, Geir K

2010-01-01

This paper analyzes the dynamics relating to flexibility in a hospital project context. Three research questions are addressed: (1) When is flexibility used in the life cycle of a project? (2) What are the stakeholders' perspectives on project flexibility? And (3) What is the nature of the interaction between flexibility in the process of a project and flexibility in terms of the characteristics of a building? Flexibility is discussed from both a project management point of view and from a hospital architecture perspective. Flexibility in project life cycle and from a stakeholder perspective is examined, and the interaction between flexibility in scope lock-in and building flexibility is investigated. The results are based on case studies of four Norwegian hospital projects. Information relating to the projects has been obtained from evaluation reports, other relevant documents, and interviews. Observations were codified and analyzed based on selected parameters that represent different aspects of flexibility. One of the cases illustrates how late changes can have a significant negative impact on the project itself, contributing to delays and cost overruns. Another case illustrates that late scope lock-in on a limited part of the project, in this case related to medical equipment, can be done in a controlled manner. Project owners and users appear to have given flexibility high priority. Project management teams are less likely to embrace changes and late scope lock-in. Architects and consultants are important for translating program requirements into physical design. A highly flexible building did not stop some stakeholders from pushing for significant changes and extensions during construction.

Daylighting simulation : comparison of softwares for architect's utilization

Energy Technology Data Exchange (ETDEWEB)

Christakou, D.E.; Amorim, C.N.D. [Brazil Univ., Brasilia (Brazil). Faculty of Architecture and Urbanism

2005-07-01

This study analyzed and compared 4 daylighting software packages to determine the primary benefits and limits of each one, while considering the priorities for the use of the software by architects. The complex task of daylight simulation is an important step in designing buildings, particularly when the main objective is comfort and energy conservation. Simulation is not yet commonly practiced by professional architects because of the complexities of various software packages, the lack of user friendly interfaces and difficulty in interpreting results. The 4 software packages that were evaluated in this study were: (1) Desktop Radiance, (2) Rayfront, (3) Relux 2004 Vision, and (4) Lightscape. Criteria such as interfaces, flexibility, and help manuals were also analyzed in an effort to establish a frame of the main points to be considered when choosing daylighting software for architectural use, both in educational and office environments. Simulations of a test room were performed in which some parameters were modified to verify the performance of the following main criteria: flexibility in adapting to the architect's workflow; the use of state of the art algorithms; numerical precision; and, access possibility by Brazilian architects. The results demonstrate the potential of software's improvement, particular in terms of user interfaces and help manuals. The study showed that Relux 2004 Vision is the most adequate for architect's use. Rayfront and Desktop Radiance presented more difficulties in the design process, but Desktop Radiance had the advantage of being enclosed in AUTOCAD, a well known interface. Lightscape had a user friendly interface but was not as intuitive as Relux. It was concluded that the ideal daylighting simulation software does not yet exist. The ideal software should integrate diverse factors and combine edition and modeling tools beyond luminous evaluation and thermal consequences of daylight use. 5 refs., 3 tabs., 4 figs.

Customizable software architectures in the accelerator control system environment

CERN Document Server

Mejuev, I; Kadokura, E

2001-01-01

Tailoring is further evolution of an application after deployment in order to adapt it to requirements that were not accounted for in the original design. End-user customization has been extensively researched in applied computer science from HCI and software engineering perspectives. Customization allows coping with flexibility requirements, decreasing maintenance and development costs of software products. In general, dynamic or diverse software requirements constitute the need for implementing end-user customization in computer systems. In accelerator physics research the factor of dynamic requirements is especially important, due to frequent software and hardware modifications resulting in correspondingly high upgrade and maintenance costs. We introduce the results of feasibility study on implementing end-user tailorability in the software for accelerator control system, considering the design and implementation of a distributed monitoring application for the 12 GeV KEK Proton Synchrotron as an example. T...

All-solid state flexible supercapacitors based on graphene/polymer composites

Energy Technology Data Exchange (ETDEWEB)

Kim, Jung Won; Choi, Bong Gill, E-mail: bgchoi@kangwon.ac.kr

2015-06-01

Recent advances in lightweight, flexible, and wearable electronic equipment has led to advancements in the development of sufficiently compact and flexible energy storage. A challenge remains to integrate the storage elements as closely as possible within a fully flexible device. Here, we demonstrate the fabrication of all-solid state flexible supercapacitors with the integration of two electrodes that consist of graphene/polymer composites. Robust conductive free-standing thin graphene/polymer composite electrodes were prepared through a simple “physical grinding” process. As-prepared composite electrodes store energy up to a reversible gravimetric capacitance of 90.6 F/g, at a constant current density of 0.5 A/g while also delivering long-term durability (90% retention) for excess of five-thousands of cycles. Notably, the enhancement of mechanical properties of supercapacitors enables them to maintain their electrochemical performance even when twisted or folded. This straightforward approach to the fabrication of fully flexible supercapacitors provides new design opportunities within wearable electronics and electrochemical applications. - Highlights: • All solid-sate supercapacitors were fabricated using graphene/polymer composite electrodes. • Supercapacitor devices show an excellent mechanical flexibility. • High electrochemical performances were demonstrated.

All-solid state flexible supercapacitors based on graphene/polymer composites

International Nuclear Information System (INIS)

Kim, Jung Won; Choi, Bong Gill

2015-01-01

Recent advances in lightweight, flexible, and wearable electronic equipment has led to advancements in the development of sufficiently compact and flexible energy storage. A challenge remains to integrate the storage elements as closely as possible within a fully flexible device. Here, we demonstrate the fabrication of all-solid state flexible supercapacitors with the integration of two electrodes that consist of graphene/polymer composites. Robust conductive free-standing thin graphene/polymer composite electrodes were prepared through a simple “physical grinding” process. As-prepared composite electrodes store energy up to a reversible gravimetric capacitance of 90.6 F/g, at a constant current density of 0.5 A/g while also delivering long-term durability (90% retention) for excess of five-thousands of cycles. Notably, the enhancement of mechanical properties of supercapacitors enables them to maintain their electrochemical performance even when twisted or folded. This straightforward approach to the fabrication of fully flexible supercapacitors provides new design opportunities within wearable electronics and electrochemical applications. - Highlights: • All solid-sate supercapacitors were fabricated using graphene/polymer composite electrodes. • Supercapacitor devices show an excellent mechanical flexibility. • High electrochemical performances were demonstrated

Service-oriented Software Defined Optical Networks for Cloud Computing

Science.gov (United States)

Liu, Yuze; Li, Hui; Ji, Yuefeng

2017-10-01

With the development of big data and cloud computing technology, the traditional software-defined network is facing new challenges (e.g., ubiquitous accessibility, higher bandwidth, more flexible management and greater security). This paper proposes a new service-oriented software defined optical network architecture, including a resource layer, a service abstract layer, a control layer and an application layer. We then dwell on the corresponding service providing method. Different service ID is used to identify the service a device can offer. Finally, we experimentally evaluate that proposed service providing method can be applied to transmit different services based on the service ID in the service-oriented software defined optical network.

Software Support of Modelling using Ergonomic Tools in Engineering

Directory of Open Access Journals (Sweden)

Darina Dupláková

2017-08-01

Full Text Available One of the preconditions for correct development of industrial production is continuous interconnecting of virtual reality and real world by computer software. Computer software are used for product modelling, creation of technical documentation, scheduling, management and optimization of manufacturing processes, and efficiency increase of human work in manufacturing plants. This article describes the frequent used ergonomic software which helping to increase of human work by error rate reducing, risks factors of working environment, injury in workplaces and elimination of arising occupational diseases. They are categorized in the field of micro ergonomics and they are applicable at the manufacturing level with flexible approach in solving of established problems.

Role of Pectoral Fin Flexibility in Robotic Fish Performance

Science.gov (United States)

Bazaz Behbahani, Sanaz; Tan, Xiaobo

2017-08-01

Pectoral fins play a vital role in the maneuvering and locomotion of fish, and they have become an important actuation mechanism for robotic fish. In this paper, we explore the effect of flexibility of robotic fish pectoral fins on the robot locomotion performance and mechanical efficiency. A dynamic model for the robotic fish is presented, where the flexible fin is modeled as multiple rigid elements connected via torsional springs and dampers. Blade element theory is used to capture the hydrodynamic force on the fin. The model is validated with experimental results obtained on a robotic fish prototype, equipped with 3D-printed fins of different flexibility. The model is then used to analyze the impacts of fin flexibility and power/recovery stroke speed ratio on the robot swimming speed and mechanical efficiency. It is found that, in general, flexible fins demonstrate advantages over rigid fins in speed and efficiency at relatively low fin-beat frequencies, while rigid fins outperform flexible fins at higher frequencies. For a given fin flexibility, the optimal frequency for speed performance differs from the optimal frequency for mechanical efficiency. In addition, for any given fin, there is an optimal power/recovery stroke speed ratio, typically in the range of 2-3, that maximizes the speed performance. Overall, the presented model offers a promising tool for fin flexibility and gait design, to achieve speed and efficiency objectives for robotic fish actuated with pectoral fins.

Management of radiodiagnostic equipment: Implementation of self-maintenance project of the conventional x-ray equipment of Hospital Universitario Clementino Fraga Filho - HUCFF-UFRJ

International Nuclear Information System (INIS)

Couto, N.F. do; Azevedo, A.C.P.; Koch, H.A.

2001-01-01

The project aims the implantation of a management program, for the maintenance of the conventional X-ray equipment at HUCFF. It has been implemented through the training of the electronic technicians who work at the Hospital. Essential courses were organized such as: Basics of Radioprotection, Radiographs Techniques, and Maintenance of equipment of X-Rays. Equipment: a library with the schemes of the equipment is being assembled in collaboration with UNICAMP. In order to manage the process, a software was created using the tools of the total quality for control of the maintenance. Preliminary tests: the equipment and their working conditions were evaluated, as well as the level of the employees' satisfaction with their use. The creation of a new routine for maintenance seeks to assist the demands of the new legislation in Brazil 5, and also reduce the costs to improve the quality of the images in the Radiodiagnostic Service. (author)

System design description for master equipment list, phase I

International Nuclear Information System (INIS)

Sandoval, J.D.

1997-01-01

This System Design Description (SDD) is for the Master Equipment List Phase I (MEL). It has been prepared following the WI-IC-CM-3-10, ''Software Practices,'' (Ref. 6). This SDD describes the internal design for implementation of the MEL Phase I

The news and innovations in radiation protection systems and equipment

International Nuclear Information System (INIS)

Hetes, M.

2014-01-01

ENVINET as the part of the Nuvia Group is well known for the engineering supplies and services for the nuclear power. Nevertheless, the development, manufacturing and service of the radiometric systems, including unique manufacturing of the ionizing radiation detectors, supplemented by the specific equipment such as led-free shielding material and specialized software products has dominant and firm position in the company's portfolio.ENVINET continually reflects with the large scale of instrumentation and systems on the specific needs within the field of detection and measurement of ionizing radiation. The company provides comprehensive services covering the radiation protection requirements in the energy industry, health, education, science and research. Offered systems are flexibly adaptable to various scales - 'on-the spot', national and international, different conditions - 'in-house' or terrain, and various modes - discontinuous or in-situ continuous measurements.The technique of the ENVNETs own development and production series is the result of the long-term experience in the nuclear power, and the co-operation with renowned research institutes, armed forces and first response groups. These traditionally include radioactive waste characterization instruments, numerous devices intended for terrain radiation survey and detection of the ionizing radiation, large scale of the plastic scintillators and NaI(Tl) detectors, digital analyzers, photomultipliers and preamplifiers, along with various types of lead and lead-free shielding.The automatic sample changer - NuLAB ASC100 stands for the news on the market, mirroring the great skill in the industrial automation and the experience in the radiation protection. The device represents advanced solution for high-resolution gamma spectrometry and is designed for automatic identification and quantification of radioisotopes in different types of samples.Daughter company Pico Envirotec continues

The case for open-source software in drug discovery.

Science.gov (United States)

DeLano, Warren L

2005-02-01

Widespread adoption of open-source software for network infrastructure, web servers, code development, and operating systems leads one to ask how far it can go. Will "open source" spread broadly, or will it be restricted to niches frequented by hopeful hobbyists and midnight hackers? Here we identify reasons for the success of open-source software and predict how consumers in drug discovery will benefit from new open-source products that address their needs with increased flexibility and in ways complementary to proprietary options.

Some researches on converting a C++ software to java

International Nuclear Information System (INIS)

Ding Yuzheng; Wang Taijie; Dai Guiliang

1997-01-01

Because of Java's flexibility, portability, and relative simplicity, Java programming language has sparked considerable interest among software developers. The author presents the experience on converting a C++ off-line software prototype to Java. Some benefits of Java while converting the C++ prototype to Java and also some limitations of Java are described. Some of these limitations arise from the differences between Java and C++, Others are due to weakness of Java itself. The article also introduces some methods to work around Java's limitations

Influence of cable losses on the economic analysis of efficient and sustainable electrical equipment

International Nuclear Information System (INIS)

Lobão, J.A.; Devezas, T.; Catalão, J.P.S.

2014-01-01

Increasing energy needs are accompanied by environmental responsibilities, since nowadays electricity companies operate in a competitive and sustainable energy framework. In this context, any proposal for action on energy efficiency becomes important for consumers to minimize operational costs. In electrical installations, electricity consumption can be decreased by reducing losses in the cables, associated with the overall efficiency of the equipment, allowing a better use of the installed power. The losses must be analysed in conjunction with all loads that contribute to the currents in the sections of an electrical installation. When replacing equipment in output distribution boxes with more efficient ones, the current in those sections is reduced in association with the decrease in power losses. This decrease, often forgotten, is taken into account in this work for the economic analysis of efficiency and sustainable electrical equipment. This paper presents a new software application that compares and chooses the best investment in the acquisition of electrical equipment. Simulation results obtained with the new software application are provided and are then validated with experimental results from a real electrical installation. - Highlights: • Any proposal for action on energy efficiency is important for consumers. • Electricity consumption can be decreased by reducing losses in the cables. • A new software application that compares and chooses the best investment is provided. • The economic analysis of efficiency and sustainable electrical equipment is carried out. • Simulation results are validated with experimental results from a real electrical installation

Making the right software choice for clinically used equipment in radiation oncology

International Nuclear Information System (INIS)

Vorwerk, Hilke; Zink, Klemens; Wagner, Daniela Michaela; Engenhart-Cabillic, Rita

2014-01-01

The customer of a new system for clinical use in radiation oncology must consider many options in order to find the optimal combination of software tools. Many commercial systems are available and each system has a large number of technical features. However an appraisal of the technical capabilities, especially the options for clinical implementations, is hardly assessable at first view. The intention of this article was to generate an assessment of the necessary functionalities for high precision radiotherapy and their integration in ROKIS (Radiation oncology clinic information system) for future customers, especially with regard to clinical applicability. Therefore we analysed the clinically required software functionalities and divided them into three categories: minimal, enhanced and optimal requirements for high conformal radiation treatment

DISTA: a portable software solution for 3D compilation of photogrammetric image blocks

Science.gov (United States)

Boochs, Frank; Mueller, Hartmut; Neifer, Markus

2001-04-01

A photogrammetric evaluation system used for the precise determination of 3D-coordinates from blocks of large metric images will be presented. First, the motivation for the development is shown, which is placed in the field of processing tools for photogrammetric evaluation tasks. As the use and availability of metric images of digital type rapidly increases corresponding equipment for the measuring process is needed. Systems which have been developed up to now are either very special ones, founded on high end graphics workstations with an according pricing or simple ones with restricted measuring functionality. A new conception will be shown, avoiding special high end graphics hardware but providing a complete processing chain for all elementary photogrammetric tasks ranging from preparatory steps over the formation of image blocks up to the automatic and interactive 3D-evaluation within digital stereo models. The presented system is based on PC-hardware equipped with off the shelf graphics boards and uses an object oriented design. The specific needs of a flexible measuring system and the corresponding requirements which have to be met by the system are shown. Important aspects as modularity and hardware independence and their value for the solution are shown. The design of the software will be presented and first results with a prototype realised on a powerful PC-hardware configuration will be featured

Subsystem software for TSTA [Tritium Systems Test Assembly

International Nuclear Information System (INIS)

Mann, L.W.; Claborn, G.W.; Nielson, C.W.

1987-01-01

The Subsystem Control Software at the Tritium System Test Assembly (TSTA) must control sophisticated chemical processes through the physical operation of valves, motor controllers, gas sampling devices, thermocouples, pressure transducers, and similar devices. Such control software has to be capable of passing stringent quality assurance (QA) criteria to provide for the safe handling of significant amounts of tritium on a routine basis. Since many of the chemical processes and physical components are experimental, the control software has to be flexible enough to allow for trial/error learning curve, but still protect the environment and personnel from exposure to unsafe levels of radiation. The software at TSTA is implemented in several levels as described in a preceding paper in these proceedings. This paper depends on information given in the preceding paper for understanding. The top level is the Subsystem Control level

INFOS: spectrum fitting software for NMR analysis

Energy Technology Data Exchange (ETDEWEB)

Smith, Albert A., E-mail: alsi@nmr.phys.chem.ethz.ch [ETH Zürich, Physical Chemistry (Switzerland)

2017-02-15

Software for fitting of NMR spectra in MATLAB is presented. Spectra are fitted in the frequency domain, using Fourier transformed lineshapes, which are derived using the experimental acquisition and processing parameters. This yields more accurate fits compared to common fitting methods that use Lorentzian or Gaussian functions. Furthermore, a very time-efficient algorithm for calculating and fitting spectra has been developed. The software also performs initial peak picking, followed by subsequent fitting and refinement of the peak list, by iteratively adding and removing peaks to improve the overall fit. Estimation of error on fitting parameters is performed using a Monte-Carlo approach. Many fitting options allow the software to be flexible enough for a wide array of applications, while still being straightforward to set up with minimal user input.

The GlycanBuilder: a fast, intuitive and flexible software tool for building and displaying glycan structures.

Science.gov (United States)

Ceroni, Alessio; Dell, Anne; Haslam, Stuart M

2007-08-07

interfaces: an example is the "GlycoWorkbench", a software tool for assisted annotation of glycan mass spectra. The "GlycanBuilder" represent a flexible, reliable and efficient solution to the problem of input and output of glycan structures in any glycomic tool or database.

The GlycanBuilder: a fast, intuitive and flexible software tool for building and displaying glycan structures

Directory of Open Access Journals (Sweden)

Dell Anne

2007-08-01

applications to create intuitive and appealing user interfaces: an example is the "GlycoWorkbench", a software tool for assisted annotation of glycan mass spectra. The "GlycanBuilder" represent a flexible, reliable and efficient solution to the problem of input and output of glycan structures in any glycomic tool or database.

A Quantitative Inquiry into Software Developers' Intentions to Use Agile Scrum Method

Science.gov (United States)

Huq, M. Shamsul

2017-01-01

In recent years, organizations have shown increasing willingness to adopt agile scrum method (ASM) to meet the demand of modern-day software development; that is to deliver faster and better software, with a built-in flexibility to absorb last minute changes in requirements. This research study was undertaken to uncover the underlying factors that…

Software life after in-service

International Nuclear Information System (INIS)

Tseng, M.; Eng, P.

1993-01-01

Software engineers and designers tend to conclude a software project at the in-service milestone of the software life cycle. But the reality is that the 'life after in-service' is significantly longer than other phases of the life cycle, typically 20 years or more depending on the maintainability of the hardware platform and the designed life of the plant. During this period, the software asset (as with other physical assets in the plant) continues to be upgraded to correct deficiencies, meet new requirements, cope with obsolescence of equipment and so on. The software life cycle ends with a migration of the software to a different platform. It is typical in a software development project to put a great deal of emphasis on design methodologies, techniques, tools, development environment, standard procedures, and project management to ensure quality product is delivered on schedule and within budget. More often than not, a disproportion of emphasis is placed on the issues and needs of the in-service phase. Once the software is in-service, the designers move on to other projects, while the maintenance and support staff must manage the software. This paper examines the issues in three steps. First it presents a view of software from maintenance and support staff perspectives, including complexity of software, suitability of documentation, configuration management, training, difficulties and risks associated with making changes, required skills and knowledge. Second, it identifies the concerns raised from these viewpoints, including costs of maintaining the software, ability to meet additional requirements, availability of support tools, length of time required to engineer and install changes, and a strategy for the migration of software asset. Finally it discusses some approaches to deal with the concerns. (Author) 5 refs., fig

Computer software to assess weld thickness loss in offshore pipelines: PEDS

Energy Technology Data Exchange (ETDEWEB)

Germano, Andre Luiz Silva; Correa, Samanda Cristine Arruda [Centro Universitario Estadual da Zona Oeste (CCMAT/UEZO), Rio de Janeiro, RJ (Brazil)], e-mail: scorrea@nuclear.ufrj.br; Souza, Edmilson Monteiro de; Silva, Ademir Xavier da; Lopes, Ricardo Tadeu [Programa de Engenharia Nuclear, COPPE, Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil)], e-mails: emonteiro@nuclear.ufrj.br, ademir@nuclear.ufrj.br, ricardo@lin.ufrj.br

2010-07-01

The purpose of this work is to present an initial vision about a computer software named PEDS to assess weld thickness loss in offshore pipelines through digital radiography. This software calculates the thickness loss through a data bank obtained using computational modeling based on Monte Carlo MCNPX code. In order to give users more flexibility, the computer software was written in Java, which allows it to run on Linux, Mac OSX and Windows. Furthermore, tools are provided to image display, select and analyze specific areas of the image (measure average, area of selection) and generate profile plots. Applications of this software in the offshore area are presented. (author)

Object oriented development of engineering software using CLIPS

Science.gov (United States)

Yoon, C. John

1991-01-01

Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

Development of YAG laser cutting system for decommissioning nuclear equipments

International Nuclear Information System (INIS)

Kasai, Takeshi; Nitta, Kazuhiko; Hosoda, Hiroshi.

1995-01-01

Technology of remote controlled cutting and reduction of generative secondary products have been required to the cutting system for decommissioning nuclear equipments. At a point of view that laser cutting technology by use of a Nd:YAG laser is effective, we have developed the laser cutting machine and carried out cutting tests for several stainless steel plates. As a result, the stainless steel plate with a thickness of 22mm could be cut by using an optical fiber which can flexibly propagate laser power, and possibility of application of this laser cutting system to decommissioning nuclear equipments was verified. (author)

Development of YAG laser cutting system for decommissioning nuclear equipments

Energy Technology Data Exchange (ETDEWEB)

Kasai, Takeshi [Fuji Electric Co. Research and Development Ltd., Yokosuka, Kanagawa (Japan); Nitta, Kazuhiko; Hosoda, Hiroshi

1995-07-01

Technology of remote controlled cutting and reduction of generative secondary products have been required to the cutting system for decommissioning nuclear equipments. At a point of view that laser cutting technology by use of a Nd:YAG laser is effective, we have developed the laser cutting machine and carried out cutting tests for several stainless steel plates. As a result, the stainless steel plate with a thickness of 22mm could be cut by using an optical fiber which can flexibly propagate laser power, and possibility of application of this laser cutting system to decommissioning nuclear equipments was verified. (author).

A Flexible and Configurable Architecture for Automatic Control Remote Laboratories

Science.gov (United States)

Kalúz, Martin; García-Zubía, Javier; Fikar, Miroslav; Cirka, Luboš

2015-01-01

In this paper, we propose a novel approach in hardware and software architecture design for implementation of remote laboratories for automatic control. In our contribution, we show the solution with flexible connectivity at back-end, providing features of multipurpose usage with different types of experimental devices, and fully configurable…

Minimizing communication cost among distributed controllers in software defined networks

Science.gov (United States)

Arlimatti, Shivaleela; Elbreiki, Walid; Hassan, Suhaidi; Habbal, Adib; Elshaikh, Mohamed

2016-08-01

Software Defined Networking (SDN) is a new paradigm to increase the flexibility of today's network by promising for a programmable network. The fundamental idea behind this new architecture is to simplify network complexity by decoupling control plane and data plane of the network devices, and by making the control plane centralized. Recently controllers have distributed to solve the problem of single point of failure, and to increase scalability and flexibility during workload distribution. Even though, controllers are flexible and scalable to accommodate more number of network switches, yet the problem of intercommunication cost between distributed controllers is still challenging issue in the Software Defined Network environment. This paper, aims to fill the gap by proposing a new mechanism, which minimizes intercommunication cost with graph partitioning algorithm, an NP hard problem. The methodology proposed in this paper is, swapping of network elements between controller domains to minimize communication cost by calculating communication gain. The swapping of elements minimizes inter and intra communication cost among network domains. We validate our work with the OMNeT++ simulation environment tool. Simulation results show that the proposed mechanism minimizes the inter domain communication cost among controllers compared to traditional distributed controllers.

FAIMS Mobile: Flexible, open-source software for field research

Science.gov (United States)

Ballsun-Stanton, Brian; Ross, Shawn A.; Sobotkova, Adela; Crook, Penny

2018-01-01

FAIMS Mobile is a native Android application supported by an Ubuntu server facilitating human-mediated field research across disciplines. It consists of 'core' Java and Ruby software providing a platform for data capture, which can be deeply customised using 'definition packets' consisting of XML documents (data schema and UI) and Beanshell scripts (automation). Definition packets can also be generated using an XML-based domain-specific language, making customisation easier. FAIMS Mobile includes features allowing rich and efficient data capture tailored to the needs of fieldwork. It also promotes synthetic research and improves transparency and reproducibility through the production of comprehensive datasets that can be mapped to vocabularies or ontologies as they are created.

Guidance, navigation, and control subsystem equipment selection algorithm using expert system methods

Science.gov (United States)

Allen, Cheryl L.

1991-01-01

Enhanced engineering tools can be obtained through the integration of expert system methodologies and existing design software. The application of these methodologies to the spacecraft design and cost model (SDCM) software provides an improved technique for the selection of hardware for unmanned spacecraft subsystem design. The knowledge engineering system (KES) expert system development tool was used to implement a smarter equipment section algorithm than that which is currently achievable through the use of a standard data base system. The guidance, navigation, and control subsystems of the SDCM software was chosen as the initial subsystem for implementation. The portions of the SDCM code which compute the selection criteria and constraints remain intact, and the expert system equipment selection algorithm is embedded within this existing code. The architecture of this new methodology is described and its implementation is reported. The project background and a brief overview of the expert system is described, and once the details of the design are characterized, an example of its implementation is demonstrated.

Developing infrared array controller with software real time operating system

Science.gov (United States)

Sako, Shigeyuki; Miyata, Takashi; Nakamura, Tomohiko; Motohara, Kentaro; Uchimoto, Yuka Katsuno; Onaka, Takashi; Kataza, Hirokazu

2008-07-01

Real-time capabilities are required for a controller of a large format array to reduce a dead-time attributed by readout and data transfer. The real-time processing has been achieved by dedicated processors including DSP, CPLD, and FPGA devices. However, the dedicated processors have problems with memory resources, inflexibility, and high cost. Meanwhile, a recent PC has sufficient resources of CPUs and memories to control the infrared array and to process a large amount of frame data in real-time. In this study, we have developed an infrared array controller with a software real-time operating system (RTOS) instead of the dedicated processors. A Linux PC equipped with a RTAI extension and a dual-core CPU is used as a main computer, and one of the CPU cores is allocated to the real-time processing. A digital I/O board with DMA functions is used for an I/O interface. The signal-processing cores are integrated in the OS kernel as a real-time driver module, which is composed of two virtual devices of the clock processor and the frame processor tasks. The array controller with the RTOS realizes complicated operations easily, flexibly, and at a low cost.

Designing SCADA application software a practical approach

CERN Document Server

McCrady, Stuart G

2013-01-01

Automation systems, often referred to as SCADA systems, involve programming at several levels; these systems include computer type field controllers that monitor and control plant equipment such as conveyor systems, pumps, and user workstations that allow the user to monitor and control the equipment through color graphic displays. All of the components of these systems are integrated through a network, such as Ethernet for fast communications. This book provides a practical guide to developing the application software for all aspects of the automation system, from the field controll

Functional Requirements for Continuation Period Equipment and Drilling

International Nuclear Information System (INIS)

Sweeney, J.J.

2000-01-01

For geophysical measurements, creating a functional requirement based on finding a specific-sized target at a specific depth is difficult because of the wide variation of subsurface and surface geologic conditions that can be encountered. An alternative approach used in this paper is to specify functional requirements based on what is needed to search for the effects of a given target within a reasonable background of environmental or geological variation (noise). There is a gap between what the state-of-the-art expert with a large amount of experience can be expected to accomplish and what a non-expert inspector with limited experience can do. There are also limitations because of the Treaty environment (equipment certification, transparency, managed access, etc.); thus, for OSI, we must opt for pragmatic approach. Equipment must be easy to use, rugged, and functional over a wide range of environmental conditions. Equipment should consist of commercially available technology. Well-established operational procedures should be used for taking measurements, reducing data, and presenting data, with software mostly provided by the manufacturer along with the equipment. Equipment should be used in conjunction with WGB-approved position-finding equipment capable of relative position determinations pertinent to the type of equipment and measurement

Software Health Management with Bayesian Networks

Science.gov (United States)

Mengshoel, Ole; Schumann, JOhann

2011-01-01

Most modern aircraft as well as other complex machinery is equipped with diagnostics systems for its major subsystems. During operation, sensors provide important information about the subsystem (e.g., the engine) and that information is used to detect and diagnose faults. Most of these systems focus on the monitoring of a mechanical, hydraulic, or electromechanical subsystem of the vehicle or machinery. Only recently, health management systems that monitor software have been developed. In this paper, we will discuss our approach of using Bayesian networks for Software Health Management (SWHM). We will discuss SWHM requirements, which make advanced reasoning capabilities for the detection and diagnosis important. Then we will present our approach to using Bayesian networks for the construction of health models that dynamically monitor a software system and is capable of detecting and diagnosing faults.

Software quality assurance plan for viscometer

International Nuclear Information System (INIS)

Gimera, M.

1994-01-01

The in situ viscometer is a portable instrument designed to raise and lower a sphere (rheometer ball) through layers of tank waste material while recording ball position, velocity, and cable tension. In the field, the viscometer attaches to a decontamination spool piece which in turn is designed to attach to any 4-inch, 150-pound flange (typical of many available tank risers). The motion of the ball and collection of data is controlled by instrumentation and control equipment housed in a separate remote control console. This document covers the product, Viscometer Data Acquisition Software. This document provides the software quality assurance plan, verification and validation plan, and configuration management plan for developing the software for the instrumentation that will be used to obtain rheology data from Tank SY-101

AMMOS: A Software Platform to Assist in silico Screening

Directory of Open Access Journals (Sweden)

Lagorce D.

2009-12-01

Full Text Available Three software packages based on the common platform of AMMOS (Automated Molecular Mechanics Optimization tool for in silico Screening for assisting virtual ligand screening purposes have been recently developed. DG-AMMOS allows generation of 3D conformations of small molecules using distance geometry and molecular mechanics optimization. AMMOS_SmallMol is a package for structural refinement of compound collections that can be used prior to docking experiments. AMMOS_ProtLig is a package for energy minimization of protein-ligand complexes. It performs an automatic procedure for molecular mechanics minimization at different levels of flexibility - from rigid to fully flexible structures of both the ligand and the receptor. The packages have been tested on small molecules with a high structural diversity and proteins binding sites of completely different geometries and physicochemical properties. The platform is developed as an open source software and can be used in a broad range of in silico drug design studies.

Towards automated visual flexible endoscope navigation.

Science.gov (United States)

van der Stap, Nanda; van der Heijden, Ferdinand; Broeders, Ivo A M J

2013-10-01

The design of flexible endoscopes has not changed significantly in the past 50 years. A trend is observed towards a wider application of flexible endoscopes with an increasing role in complex intraluminal therapeutic procedures. The nonintuitive and nonergonomical steering mechanism now forms a barrier in the extension of flexible endoscope applications. Automating the navigation of endoscopes could be a solution for this problem. This paper summarizes the current state of the art in image-based navigation algorithms. The objectives are to find the most promising navigation system(s) to date and to indicate fields for further research. A systematic literature search was performed using three general search terms in two medical-technological literature databases. Papers were included according to the inclusion criteria. A total of 135 papers were analyzed. Ultimately, 26 were included. Navigation often is based on visual information, which means steering the endoscope using the images that the endoscope produces. Two main techniques are described: lumen centralization and visual odometry. Although the research results are promising, no successful, commercially available automated flexible endoscopy system exists to date. Automated systems that employ conventional flexible endoscopes show the most promising prospects in terms of cost and applicability. To produce such a system, the research focus should lie on finding low-cost mechatronics and technologically robust steering algorithms. Additional functionality and increased efficiency can be obtained through software development. The first priority is to find real-time, robust steering algorithms. These algorithms need to handle bubbles, motion blur, and other image artifacts without disrupting the steering process.

Aircraft interrogation and display system: A ground support equipment for digital flight systems

Science.gov (United States)

Glover, R. D.

1982-01-01

A microprocessor-based general purpose ground support equipment for electronic systems was developed. The hardware and software are designed to permit diverse applications in support of aircraft flight systems and simulation facilities. The implementation of the hardware, the structure of the software, describes the application of the system to an ongoing research aircraft project are described.

Method and procedure of fatigue analysis for nuclear equipment

International Nuclear Information System (INIS)

Wen Jing; Fang Yonggang; Lu Yan; Zhang Yue; Sun Zaozhan; Zou Mingzhong

2014-01-01

As an example, the fatigue analysis for the upper head of the pressurizer in one NPP was carried out by using ANSYS, a finite element method analysis software. According to RCC-M code, only two kinds of typical transients of temperature and pressure were considered in the fatigue analysis. Meanwhile, the influence of earthquake was taken into account. The method and procedure of fatigue analysis for nuclear safety equipment were described in detail. This paper provides a reference for fatigue analysis and assessment of nuclear safety grade equipment and pipe. (authors)

Localization of equipment for digital plant protection system

Energy Technology Data Exchange (ETDEWEB)

Koo, I. S.; Park, H. Y.; Lee, C. K. and others

2000-10-01

The objective of this project lies on the development of design requirements, establishment of structure and manufacture procedures, development of the software verification and validation(V and V) techniques of the digital plant protection system. The functional requirements based on the analog protection system and digital design requirements are introduced, the processor and system bus for safety grade equipment are selected and the interface requirements and the design specification have been developed in order to manufacture the quick prototype of the digital plant protection system. The selection guidelines of parts, software development and coding and testing for digital plant protection system have been performed through manufacturing the quick prototype based on the developed design specification. For the software verification and validation, the software review plan and techniques of verification and validation have been researched. The digital validation system is developed in order to verify the quick prototype. The digital design requirements are reviewed by the software safety plan and V and V plans. The formal methods for verifying the safety-grade software are researched, then the methodology of formal analysis and testing have been developed.

Localization of equipment for digital plant protection system

International Nuclear Information System (INIS)

Koo, I. S.; Park, H. Y.; Lee, C. K. and others

2000-10-01

The objective of this project lies on the development of design requirements, establishment of structure and manufacture procedures, development of the software verification and validation(V and V) techniques of the digital plant protection system. The functional requirements based on the analog protection system and digital design requirements are introduced, the processor and system bus for safety grade equipment are selected and the interface requirements and the design specification have been developed in order to manufacture the quick prototype of the digital plant protection system. The selection guidelines of parts, software development and coding and testing for digital plant protection system have been performed through manufacturing the quick prototype based on the developed design specification. For the software verification and validation, the software review plan and techniques of verification and validation have been researched. The digital validation system is developed in order to verify the quick prototype. The digital design requirements are reviewed by the software safety plan and V and V plans. The formal methods for verifying the safety-grade software are researched, then the methodology of formal analysis and testing have been developed

Information technologies and software packages for education of specialists in materials science [In Russian

NARCIS (Netherlands)

Krzhizhanovskaya, V.; Ryaboshuk, S.

2009-01-01

This paper presents methodological materials, interactive text-books and software packages developed and extensively used for education of specialists in materials science. These virtual laboratories for education and research are equipped with tutorials and software environment for modeling complex

Software Graphical User Interface For Analysis Of Images

Science.gov (United States)

Leonard, Desiree M.; Nolf, Scott R.; Avis, Elizabeth L.; Stacy, Kathryn

1992-01-01

CAMTOOL software provides graphical interface between Sun Microsystems workstation and Eikonix Model 1412 digitizing camera system. Camera scans and digitizes images, halftones, reflectives, transmissives, rigid or flexible flat material, or three-dimensional objects. Users digitize images and select from three destinations: work-station display screen, magnetic-tape drive, or hard disk. Written in C.

LLCEDATA and LLCECALC for Windows version 1.0, Volume 3: Software verification and validation

International Nuclear Information System (INIS)

McFadden, J.G.

1998-01-01

LLCEDATA and LLCECALC for Windows are user-friendly computer software programs that work together to determine the proper waste designation, handling, and disposition requirements for Long Length Contaminated Equipment (LLCE). LLCEDATA reads from a variety of data bases to produce an equipment data file(EDF) that represents a snapshot of both the LLCE and the tank from which it originates. LLCECALC reads the EDF and the gamma assay file (AV2) that is produced by the flexible Receiver Gamma Energy Analysis System. LLCECALC performs corrections to the AV2 file as it is being read and characterizes the LLCE. Both programs produce a variety of reports, including a characterization report and a status report. The status report documents each action taken by the user, LLCEDATA, and LLCECALC. Documentation for LLCEDATA and LLCECALC for Windows is available in three volumes. Volume 1 is a user's manual, which is intended as a quick reference for both LLCEDATA and LLCECALC. Volume 2 is a technical manual, which discusses system limitations and provides recommendations to the LLCE process. Volume 3 documents LLCEDATA and LLCECALC's verification and validation. Two of the three installation test cases, from Volume 1, are independently confirmed. Data bases used in LLCEDATA are verified and referenced. Both phases of LLCECALC process gamma and characterization, are extensively tested to verify that the methodology and algorithms used are correct

SLIMarray: Lightweight software for microarray facility management

Directory of Open Access Journals (Sweden)

Marzolf Bruz

2006-10-01

Full Text Available Abstract Background Microarray core facilities are commonplace in biological research organizations, and need systems for accurately tracking various logistical aspects of their operation. Although these different needs could be handled separately, an integrated management system provides benefits in organization, automation and reduction in errors. Results We present SLIMarray (System for Lab Information Management of Microarrays, an open source, modular database web application capable of managing microarray inventories, sample processing and usage charges. The software allows modular configuration and is well suited for further development, providing users the flexibility to adapt it to their needs. SLIMarray Lite, a version of the software that is especially easy to install and run, is also available. Conclusion SLIMarray addresses the previously unmet need for free and open source software for managing the logistics of a microarray core facility.

Improved HEPA Filter Technology for Flexible and Rigid Containment Barriers

International Nuclear Information System (INIS)

Pinson, Paul Arthur

1998-01-01

Safety and reliability in glovebox operations can be significantly improved and waste packaging efficiencies can be increased by inserting flexible, lightweight, high capacity HEPA filters into the walls of plastic sheet barriers. This HEPA filter/barrier technology can be adapted to a wide variety of applications: disposable waste bags, protective environmental barriers for electronic equipment, single or multiple use glovebag assemblies, flexible glovebox wall elements, and room partitions. These reliable and inexpensive filtered barriers have many uses in fields such as radioactive waste processing, HVAC filter changeout, vapor or grit blasting, asbestos cleanup, pharmaceutical, medical, biological, and electronic equipment containment. The applications can result in significant cost savings, improved operational reliability and safety, and total waste volume reduction. This technology was developed at the Argonne National Laboratory-West (ANL-W) in 1993 and has been used at ANL-W since then at the TRU Waste Characterization Chamber Gloveboxes. Another 1998 AGS Conference paper titled ''TRU Waste Characterization Gloveboxes'', presented by Mr. David Duncan of ANL-W, describes these boxes

Pragmatic quality metrics for evolutionary software development models

Science.gov (United States)

Royce, Walker

1990-01-01

Due to the large number of product, project, and people parameters which impact large custom software development efforts, measurement of software product quality is a complex undertaking. Furthermore, the absolute perspective from which quality is measured (customer satisfaction) is intangible. While we probably can't say what the absolute quality of a software product is, we can determine the relative quality, the adequacy of this quality with respect to pragmatic considerations, and identify good and bad trends during development. While no two software engineers will ever agree on an optimum definition of software quality, they will agree that the most important perspective of software quality is its ease of change. We can call this flexibility, adaptability, or some other vague term, but the critical characteristic of software is that it is soft. The easier the product is to modify, the easier it is to achieve any other software quality perspective. This paper presents objective quality metrics derived from consistent lifecycle perspectives of rework which, when used in concert with an evolutionary development approach, can provide useful insight to produce better quality per unit cost/schedule or to achieve adequate quality more efficiently. The usefulness of these metrics is evaluated by applying them to a large, real world, Ada project.

Hybrid Software and System Development in Practice: Waterfall, Scrum, and Beyond

OpenAIRE

Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen; Tell, Paolo; Garousi, Vahid; Felderer, Michael; Trektere, Kitija; McCaffery, Fergal; Linssen, Oliver; Hanser, Eckhart; Prause, Christian

2017-01-01

Software and system development faces numerous challenges of rapidly changing markets. To address such challenges, companies and projects design and adopt specific development approaches by combining well-structured comprehensive methods and flexible agile practices. Yet, the number of methods and practices is large, and available studies argue that the actual process composition is carried out in a fairly ad-hoc manner. The present paper reports on a survey on hybrid software development app...

Thermal analysis of the failed equipment storage vault system

International Nuclear Information System (INIS)

Jerrell, J.; Lee, S.Y.; Shadday, A.

1995-07-01

A storage facility for failed glass melters is required for radioactive operation of the Defense Waste Processing Facility (DWPF). It is currently proposed that the failed melters be stored in the Failed Equipment Storage Vaults (FESV's) in S area. The FESV's are underground reinforced concrete structures constructed in pairs, with adjacent vaults sharing a common wall. A failed melter is to be placed in a steel Melter Storage Box (MSB), sealed, and lowered into the vault. A concrete lid is then placed over the top of the FESV. Two melters will be placed within the FESV/MSB system, separated by the common wall. There is no forced ventilation within the vault so that the melter is passively cooled. Temperature profiles in the Failed Equipment Storage Vault Structures have been generated using the FLOW3D software to model heat conduction and convection within the FESV/MSB system. Due to complexities in modeling radiation with FLOW3D, P/THERMAL software has been used to model radiation using the conduction/convection temperature results from FLOW3D. The final conjugate model includes heat transfer by conduction, convection, and radiation to predict steady-state temperatures. Also, the FLOW3D software has been validated as required by the technical task request

Environmental equipment for usages of FEM software. ADVENTURE system user's guide

Energy Technology Data Exchange (ETDEWEB)

Yamasaki, Ichirou [Japan Atomic Energy Research Inst., Center for Promotion of Computional Science and Engineering, Kizu, Kyoto (Japan); Yoshimura, Shinobu [Tokyo Univ., Tokyo (Japan)

2003-05-01

The community softwares, databases, and other various tools have been installed in the ITBL environment by the Office of ITBL Promotion as a common utility property for each research field. Among those softwares, Finite Element Method (FEM) code, Adventure (which was originally developed by Prof. Yoshimura, the University of Tokyo), is provided as one of structure analysis programs for ITBL users. The code is well known to possess a high performance ability for parallel processing, especially for massively parallel environments. In this report, a chain of processes for usages of the system as well as the installation method to PC cluster are described. (author)

FASTBUS software workshop

International Nuclear Information System (INIS)

1985-01-01

FASTBUS is a standard for modular high-speed data acquisition, data-processing and control, development for use in high-energy physics experiments incorporating different types of computers and microprocessors. This Workshop brought together users from different laboratories for a review of current software activities, using the standard both in experiments and for test equipment. There are also papers on interfacing and the present state of systems being developed for use in future LEP experiments. Also included is a discussion on the proposed revision of FASTBUS Standard Routines. (orig.)

Reliability and validity of the AutoCAD software method in lumbar lordosis measurement.

Science.gov (United States)

Letafatkar, Amir; Amirsasan, Ramin; Abdolvahabi, Zahra; Hadadnezhad, Malihe

2011-12-01

The aim of this study was to determine the reliability and validity of the AutoCAD software method in lumbar lordosis measurement. Fifty healthy volunteers with a mean age of 23 ± 1.80 years were enrolled. A lumbar lateral radiograph was taken on all participants, and the lordosis was measured according to the Cobb method. Afterward, the lumbar lordosis degree was measured via AutoCAD software and flexible ruler methods. The current study is accomplished in 2 parts: intratester and intertester evaluations of reliability as well as the validity of the flexible ruler and software methods. Based on the intraclass correlation coefficient, AutoCAD's reliability and validity in measuring lumbar lordosis were 0.984 and 0.962, respectively. AutoCAD showed to be a reliable and valid method to measure lordosis. It is suggested that this method may replace those that are costly and involve health risks, such as radiography, in evaluating lumbar lordosis.

Leveraging the wisdom of the crowd in software testing

CERN Document Server

Sharma, Mukesh

2015-01-01

Its scale, flexibility, cost effectiveness, and fast turnaround are just a few reasons why crowdsourced testing has received so much attention lately. While there are a few online resources that explain what crowdsourced testing is all about, there's been a need for a book that covers best practices, case studies, and the future of this technique.Filling this need, Leveraging the Wisdom of the Crowd in Software Testing shows you how to leverage the wisdom of the crowd in your software testing process. Its comprehensive coverage includes the history of crowdsourcing and crowdsourced testing, im

IMAGE information monitoring and applied graphics software environment. Volume 4. Applications description

International Nuclear Information System (INIS)

Hallam, J.W.; Ng, K.B.; Upham, G.L.

1986-09-01

The EPRI Information Monitoring and Applied Graphics Environment (IMAGE) system is designed for 'fast proto-typing' of advanced concepts for computer-aided plant operations tools. It is a flexible software system which can be used for rapidly creating, dynamically driving and evaluating advanced operator aid displays. The software is written to be both host computer and graphic device independent. This four volume report includes an Executive Overview of the IMAGE package (Volume 1), followed by Software Description (Volume II), User's Guide (Volume III), and Description of Example Applications (Volume IV)

DOOCS patterns, reusable software components for FPGA based RF GUN field controller

Energy Technology Data Exchange (ETDEWEB)

Pucyk, P. [Institute of Electronic Systems, Warsaw (Poland)

2006-07-01

Modern accelerator technology combines software and hardware solutions to provide distributed, high efficiency digital systems for High Energy Physics experiments. Providing flexible, maintainable software is crucial for ensuring high availability of the whole system. In order to fulfil all these requirements, appropriate design and development techniques have to be used. Software patterns are well known solution for common programming issues, providing proven development paradigms, which can help to avoid many design issues. DOOCS patterns introduces new concepts of reusable software components for control system algorithms development and implementation in DOOCS framework. Chosen patterns have been described and usage examples have been presented in this paper. (orig.)

DOOCS patterns, reusable software components for FPGA based RF GUN field controller

International Nuclear Information System (INIS)

Pucyk, P.

2006-01-01

Modern accelerator technology combines software and hardware solutions to provide distributed, high efficiency digital systems for High Energy Physics experiments. Providing flexible, maintainable software is crucial for ensuring high availability of the whole system. In order to fulfil all these requirements, appropriate design and development techniques have to be used. Software patterns are well known solution for common programming issues, providing proven development paradigms, which can help to avoid many design issues. DOOCS patterns introduces new concepts of reusable software components for control system algorithms development and implementation in DOOCS framework. Chosen patterns have been described and usage examples have been presented in this paper. (orig.)

Research and Implementation of Software Used for the Remote Control for VM700T Video Measuring Instrument

Directory of Open Access Journals (Sweden)

Song Wenjie

2015-01-01

Full Text Available In this paper, the measurement software which can be used to realize remote control of the VM700T video measuring instrument is introduced. The authors can operate VM700T by a virtual panel on the client computer, select the results that the measuring equipment displayed to transmit it, and then display the image on the VM700T virtual panel in real time. The system does have some practical values and play an important role in distance learning. The functions that the system realized mainly includes four aspects: the real-time transmission of message based on the socket technology, the serial connection between server PC and VM700T measuring equipment, the image acquisition based on VFW technology and JPEG compression and decompression, and the network transmission of image files. The actual network transmission test is shown that the data acquisition method of this thesis is flexible and convenient, and the system is of extraordinary stability. It can display the measurement results in real time and basically realize the requirements of remote control. In the content, this paper includes a summary of principle, the detailed introduction of the system realization process and some related technology.

Usability Evaluation Method for Agile Software Development

Directory of Open Access Journals (Sweden)

Saad Masood Butt

2015-02-01

Full Text Available Agile methods are the best fit for tremendously growing software industry due to its flexible and dynamic nature. But the software developed using agile methods do meet the usability standards? To answer this question we can see that majority of agile software development projects currently involve interactive user interface designs, which can only be possible by following User Centered Design (UCD in agile methods. The question here is, how to integrate UCD with agile models. Both Agile models and UCD are iterative in nature but agile models focus on coding and development of software; whereas, UCD focuses on user interface of the software. Similarly, both of them have testing features where the agile model involves automated tested code while UCD involves an expert or a user to test the user interface. In this paper, a new agile usability model is proposed and the evaluation is of the proposed model is presented by practically implementing it in three real life projects. . Key results from these projects clearly show: the proposed agile model incorporates usability evaluation methods, improves the relationship between usability experts to work with agile software experts; in addition, allows agile developers to incorporate the result from UCD into subsequent interactions.

Safety Review related to Commercial Grade Digital Equipment in Safety System

International Nuclear Information System (INIS)

Yu, Yeongjin; Park, Hyunshin; Yu, Yeongjin; Lee, Jaeheung

2013-01-01

The upgrades or replacement of I and C systems on safety system typically involve digital equipment developed in accordance with non-nuclear standards. However, the use of commercial grade digital equipment could include the vulnerability for software common-mode failure, electromagnetic interference and unanticipated problems. Although guidelines and standards for dedication methods of commercial grade digital equipment are provided, there are some difficulties to apply the methods to commercial grade digital equipment for safety system. This paper focuses on regulatory guidelines and relevant documents for commercial grade digital equipment and presents safety review experiences related to commercial grade digital equipment in safety system. This paper focuses on KINS regulatory guides and relevant documents for dedication of commercial grade digital equipment and presents safety review experiences related to commercial grade digital equipment in safety system. Dedication including critical characteristics is required to use the commercial grade digital equipment on safety system in accordance with KEPIC ENB 6370 and EPRI TR-106439. The dedication process should be controlled in a configuration management process. Appropriate methods, criteria and evaluation result should be provided to verify acceptability of the commercial digital equipment used for safety function

Design and Construction of Equipment for Applying the Geophysical Prospecting Method Electric Tomography

Directory of Open Access Journals (Sweden)

Fabio Héctor Giraldo Sánchez

2013-06-01

Full Text Available Outlines the procedure for the design and construction of electric equipment for geophysical prospecting through electrical tomography method. The team is of average power, ensuring exploration depths quite suitable for applications and commercial and geotechnical studies. The device is essentially a DC voltage source of 500 volts that is able to provide a maximum current of 1 amp. It also contains a small charge current source of electrical currents counteract naturally found in the subsoil and are manifested as a difference in the surface potential. A general explanation of the geophysical method in question, helps to understand the basic principles of operation of the equipment and functions to be fulfilled. After building the team, we conducted a field data acquisition, in area near the town of Gachancipa Cundinamarca. The data from this equipment are processed with specialized software. The images obtained with the software presents the distributions of subsurface resistivity can be associated with the possible structures and geology of the study area.

Impact of human resources on wine supply chain flexibility, quality, and economic performance

Directory of Open Access Journals (Sweden)

J. L. García-Alcaraz

2016-09-01

Full Text Available This article assesses the impact of human resources skills on production quality, flexibility, and economic performance of La Rioja’s wine supply chain. These four elements were integrated as latent variables composed of 15 observed variables and associated through six hypotheses. Data were gathered from 64 wineries located in La Rioja, Spain, and hypotheses were validated in a structural equation model using WarpPLS v.5 software. Results indicate that human resources skills have a positive direct impact on SC flexibility and quality, but not on economic performance; however, these variables are indirectly associated through SC quality and SC flexibility.

Development of flexible support for molten salt reactor

International Nuclear Information System (INIS)

Xie, Mingqiang

2014-01-01

Supporting member design for equipment and pipes is the requisite factor to realize the concept. It's a challenge to design a reliable supporting structure in molten salt reactor (MSR) due to the extraordinary working temperature (max 750 deg. C). High temperature may cause large expansion and reduce the mechanical strength of material, The support is required both enough strength and flexibility. In this paper, an all-dimensional support was designed, the validation work was carried out on a high temperature test loop. The results indicate that the support has a good performance, it reduce the thermal stress effectively and support the equipment and pipes stably for one year. The support design has a significance referential meaning for MSR construction (authors)

A Custom Approach for a Flexible, Real-Time and Reliable Software Defined Utility.

Science.gov (United States)

Zaballos, Agustín; Navarro, Joan; Martín De Pozuelo, Ramon

2018-02-28

Information and communication technologies (ICTs) have enabled the evolution of traditional electric power distribution networks towards a new paradigm referred to as the smart grid. However, the different elements that compose the ICT plane of a smart grid are usually conceived as isolated systems that typically result in rigid hardware architectures, which are hard to interoperate, manage and adapt to new situations. In the recent years, software-defined systems that take advantage of software and high-speed data network infrastructures have emerged as a promising alternative to classic ad hoc approaches in terms of integration, automation, real-time reconfiguration and resource reusability. The purpose of this paper is to propose the usage of software-defined utilities (SDUs) to address the latent deployment and management limitations of smart grids. More specifically, the implementation of a smart grid's data storage and management system prototype by means of SDUs is introduced, which exhibits the feasibility of this alternative approach. This system features a hybrid cloud architecture able to meet the data storage requirements of electric utilities and adapt itself to their ever-evolving needs. Conducted experimentations endorse the feasibility of this solution and encourage practitioners to point their efforts in this direction.

Software engineering processes for Class D missions

Science.gov (United States)

Killough, Ronnie; Rose, Debi

2013-09-01

Software engineering processes are often seen as anathemas; thoughts of CMMI key process areas and NPR 7150.2A compliance matrices can motivate a software developer to consider other career fields. However, with adequate definition, common-sense application, and an appropriate level of built-in flexibility, software engineering processes provide a critical framework in which to conduct a successful software development project. One problem is that current models seem to be built around an underlying assumption of "bigness," and assume that all elements of the process are applicable to all software projects regardless of size and tolerance for risk. This is best illustrated in NASA's NPR 7150.2A in which, aside from some special provisions for manned missions, the software processes are to be applied based solely on the criticality of the software to the mission, completely agnostic of the mission class itself. That is, the processes applicable to a Class A mission (high priority, very low risk tolerance, very high national significance) are precisely the same as those applicable to a Class D mission (low priority, high risk tolerance, low national significance). This paper will propose changes to NPR 7150.2A, taking mission class into consideration, and discuss how some of these changes are being piloted for a current Class D mission—the Cyclone Global Navigation Satellite System (CYGNSS).

Integrated FASTBUS, VME and CAMAC diagnostic software at Fermilab

International Nuclear Information System (INIS)

Anderson, J.; Forster, R.; Franzen, J.; Wilcer, N.

1992-10-01

A fully integrated system for the diagnosis and repair of data acquisition hardware in FASTBUS, VME and CAMAC is described. A short cost/benefit analysis of using a distributed network of personal computers for diagnosis is presented. The SPUDS (Single Platform Uniting Diagnostic Software) software package developed at Fermilab by the authors is introduced. Examples of how SPUDS is currently used in the Fermilab equipment repair facility, as an evaluation tool and for field diagnostics are given

Communication satellites to enter a new age of flexibility

Science.gov (United States)

Balty, Cédric; Gayrard, Jean-Didier; Agnieray, Patrick

2009-07-01

To cope with the economical and technical evolutions of the communication market and to better compete with or complement terrestrial networks, satellite operators are requiring more flexible satellites. It allows a better fleet planning potential and back-up policy, a more standardized and efficient procurement process, mission adaptation to market evolution and the possibility of early entry in new markets. New technologies that are developed either for terrestrial networks or for space defense applications would become soon available to satellite and equipment manufacturers. A skilful mix of these new technologies with the older and more mature ones should boost satellite performances and bring flexibility to the new generation of communication satellites. This paper reviews the economical and technical environment of the space communication business for the next decade. It identifies the needs and levels of flexibility that are required by the market but also allowed by technologies, in both a top-down and bottom-up approach.

An optimization tool for satellite equipment layout

Science.gov (United States)

Qin, Zheng; Liang, Yan-gang; Zhou, Jian-ping

2018-01-01

Selection of the satellite equipment layout with performance constraints is a complex task which can be viewed as a constrained multi-objective optimization and a multiple criteria decision making problem. The layout design of a satellite cabin involves the process of locating the required equipment in a limited space, thereby satisfying various behavioral constraints of the interior and exterior environments. The layout optimization of satellite cabin in this paper includes the C.G. offset, the moments of inertia and the space debris impact risk of the system, of which the impact risk index is developed to quantify the risk to a satellite cabin of coming into contact with space debris. In this paper an optimization tool for the integration of CAD software as well as the optimization algorithms is presented, which is developed to automatically find solutions for a three-dimensional layout of equipment in satellite. The effectiveness of the tool is also demonstrated by applying to the layout optimization of a satellite platform.

2006 XSD Scientific Software Workshop report.

Energy Technology Data Exchange (ETDEWEB)

Evans, K., Jr.; De Carlo, F.; Jemian, P.; Lang, J.; Lienert, U.; Maclean, J.; Newville, M.; Tieman, B.; Toby, B.; van Veenendaal, B.; Univ. of Chicago

2006-01-22

In May of 2006, a committee was formed to assess the fundamental needs and opportunities in scientific software for x-ray data reduction, analysis, modeling, and simulation. This committee held a series of discussions throughout the summer, conducted a poll of the members of the x-ray community, and held a workshop. This report details the findings and recommendations of the committee. Each experiment performed at the APS requires three crucial ingredients: the powerful x-ray source, an optimized instrument to perform measurements, and computer software to acquire, visualize, and analyze the experimental observations. While the APS has invested significant resources in the accelerator, investment in other areas such as scientific software for data analysis and visualization has lagged behind. This has led to the adoption of a wide variety of software with variable levels of usability. In order to maximize the scientific output of the APS, it is essential to support the broad development of real-time analysis and data visualization software. As scientists attack problems of increasing sophistication and deal with larger and more complex data sets, software is playing an ever more important role. Furthermore, our need for excellent and flexible scientific software can only be expected to increase, as the upgrade of the APS facility and the implementation of advanced detectors create a host of new measurement capabilities. New software analysis tools must be developed to take full advantage of these capabilities. It is critical that the APS take the lead in software development and the implementation of theory to software to ensure the continued success of this facility. The topics described in this report are relevant to the APS today and critical for the APS upgrade plan. Implementing these recommendations will have a positive impact on the scientific productivity of the APS today and will be even more critical in the future.

Flexible Assembly Solar Technology (FAST) Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Toister, Elad [BrightSource Energy Inc., Jerusalem (Israel)

2014-11-06

The Flexible Assembly Solar Technology (FAST) project was initiated by BrightSource in an attempt to provide potential solar field EPC contractors with an effective set of tools to perform specific construction tasks. These tasks are mostly associated with heliostat assembly and installation, and require customized non-standard tools. The FAST concept focuses on low equipment cost, reduced setup time and increased assembly throughput as compared to the Ivanpah solar field construction tools.

Reducing the risk of failure: Software Quality assurance standards and methods

International Nuclear Information System (INIS)

Elphick, J.; Cope, H.

1992-01-01

An effective Software Quality Assurance (SQA) program provides an overall approach to software engineering and the establishment of proven methods for the production of reliable software. And, in the authors experience, the overall costs for the software life are diminished with the application of quality methods. In their experience, the issues for implementing quality standards and practices are many. This paper addresses those issues as well as the lessons learned from developing and implementing a number of software quality assurance programs. Their experience includes the development and implementation of their own NRC accepted SQA program and an SQA program for an engineering software developer, as well as developing SQA procedures, standards, and methods for utilities, medical and commercial clients. Some of the issues addressed in this paper are: setting goals and defining quality; applying the software life cycle; addressing organizational issues; providing flexibility and increasing productivity; producing effective documentation; maintaining quality records; Imposing software configuration management; conducting reviews, audits, and controls; verification and validation; and controlling software procurement

Techniques and software architectures for medical visualisation and image processing

NARCIS (Netherlands)

Botha, C.P.

2005-01-01

This thesis presents a flexible software platform for medical visualisation and image processing, a technique for the segmentation of the shoulder skeleton from CT data and three techniques that make contributions to the field of direct volume rendering. Our primary goal was to investigate the use

GfaPy: a flexible and extensible software library for handling sequence graphs in Python.

Science.gov (United States)

Gonnella, Giorgio; Kurtz, Stefan

2017-10-01

GFA 1 and GFA 2 are recently defined formats for representing sequence graphs, such as assembly, variation or splicing graphs. The formats are adopted by several software tools. Here, we present GfaPy, a software package for creating, parsing and editing GFA graphs using the programming language Python. GfaPy supports GFA 1 and GFA 2, using the same interface and allows for interconversion between both formats. The software package provides a simple interface for custom record types, which is an important new feature of GFA 2 (compared to GFA 1). This enables new applications of the format. GfaPy is available open source at https://github.com/ggonnella/gfapy and installable via pip. gonnella@zbh.uni-hamburg.de. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Influence of flexible pin for planets on service life of wind turbine gearboxes

International Nuclear Information System (INIS)

Park, Young Jun; Lee, Geun Ho; Nam, Yong Yun; Kim, Jeong Kil

2012-01-01

An overhung mounted carrier with flexible pins is applied to the planetary gear train of a wind turbine gearbox to investigate the influence of the self aligning effect by means of the deflection of the planet spindle and the flexible pin on the lifetime of the planet gear for a wind turbine gearbox. To analyze the load distribution of planet gears, both Euler theory and commercial software are employed. By applying an overhung mounted carrier with flexible pins in the wind turbine gearbox, we can improve the misalignment performance, face load factor, and service life of the planet gears. In particular, it was confirmed that a service life of more than 20 years could be realized for wind turbine gearboxes by applying a flexible pin to overhung mounted carrier

Structure and software tools of AIDA.

Science.gov (United States)

Duisterhout, J S; Franken, B; Witte, F

1987-01-01

AIDA consists of a set of software tools to allow for fast development and easy-to-maintain Medical Information Systems. AIDA supports all aspects of such a system both during development and operation. It contains tools to build and maintain forms for interactive data entry and on-line input validation, a database management system including a data dictionary and a set of run-time routines for database access, and routines for querying the database and output formatting. Unlike an application generator, the user of AIDA may select parts of the tools to fulfill his needs and program other subsystems not developed with AIDA. The AIDA software uses as host language the ANSI-standard programming language MUMPS, an interpreted language embedded in an integrated database and programming environment. This greatly facilitates the portability of AIDA applications. The database facilities supported by AIDA are based on a relational data model. This data model is built on top of the MUMPS database, the so-called global structure. This relational model overcomes the restrictions of the global structure regarding string length. The global structure is especially powerful for sorting purposes. Using MUMPS as a host language allows the user an easy interface between user-defined data validation checks or other user-defined code and the AIDA tools. AIDA has been designed primarily for prototyping and for the construction of Medical Information Systems in a research environment which requires a flexible approach. The prototyping facility of AIDA operates terminal independent and is even to a great extent multi-lingual. Most of these features are table-driven; this allows on-line changes in the use of terminal type and language, but also causes overhead. AIDA has a set of optimizing tools by which it is possible to build a faster, but (of course) less flexible code from these table definitions. By separating the AIDA software in a source and a run-time version, one is able to write

Wall adjustment strategy software for use with the NASA Langley 0.3-meter transonic cryogenic tunnel adaptive wall test section

Science.gov (United States)

Wolf, Stephen W. D.

1988-01-01

The Wall Adjustment Strategy (WAS) software provides successful on-line control of the 2-D flexible walled test section of the Langley 0.3-m Transonic Cryogenic Tunnel. This software package allows the level of operator intervention to be regulated as necessary for research and production type 2-D testing using and Adaptive Wall Test Section (AWTS). The software is designed to accept modification for future requirements, such as 3-D testing, with a minimum of complexity. The WAS software described is an attempt to provide a user friendly package which could be used to control any flexible walled AWTS. Control system constraints influence the details of data transfer, not the data type. Then this entire software package could be used in different control systems, if suitable interface software is available. A complete overview of the software highlights the data flow paths, the modular architecture of the software and the various operating and analysis modes available. A detailed description of the software modules includes listings of the code. A user's manual is provided to explain task generation, operating environment, user options and what to expect at execution.

Development of automatic Ultrasonic testing equipment for reactor pressure vessel

International Nuclear Information System (INIS)

Kim, Kor R.; Kim, Jae H.; Lee, Jae C.

1996-06-01

The selected weld areas of a reactor pressure vessel and adjacent piping are examined by the remote mechanized ultrasonic testing (MUT) equipment. Since the MUT equipment was purchased from southwest Research Institute (SwRI) in April 1985, 15 inservice inspections and 5 preservice inspections are performed with this MUT equipment. However due to the old age of the equipment and frequent movements to plant sites, the reliability of examination was recently decreased rapidly and it is very difficult to keep spare parts. In order to resolve these problems and to meet the strong request from plant sites, we intend to develop a new 3-axis control system including hardware and software. With this control system, we expect more efficient and reliable examination of the nozzle to shell weld areas, which is specified in ASME Code Section XI. The new 3-axis control system hardware and software were designed and development of our own control system, the advanced technologies of computer control mechanism were established and examination reliability of the nozzle to shell weld area was improved. With the development of our 3-axis control system for PaR ISI-2 computer control system, the reliability of nozzle to shell weld area examination has been improved. The established technologies from the development and detailed analysis of existing control system, are expected to be applied to the similar control systems in nuclear power plants. (author). 12 refs., 4 tabs., 33 figs

Development of automatic Ultrasonic testing equipment for reactor pressure vessel

Energy Technology Data Exchange (ETDEWEB)

Kim, Kor R.; Kim, Jae H.; Lee, Jae C.

1996-06-01

The selected weld areas of a reactor pressure vessel and adjacent piping are examined by the remote mechanized ultrasonic testing (MUT) equipment. Since the MUT equipment was purchased from southwest Research Institute (SwRI) in April 1985, 15 inservice inspections and 5 preservice inspections are performed with this MUT equipment. However due to the old age of the equipment and frequent movements to plant sites, the reliability of examination was recently decreased rapidly and it is very difficult to keep spare parts. In order to resolve these problems and to meet the strong request from plant sites, we intend to develop a new 3-axis control system including hardware and software. With this control system, we expect more efficient and reliable examination of the nozzle to shell weld areas, which is specified in ASME Code Section XI. The new 3-axis control system hardware and software were designed and development of our own control system, the advanced technologies of computer control mechanism were established and examination reliability of the nozzle to shell weld area was improved. With the development of our 3-axis control system for PaR ISI-2 computer control system, the reliability of nozzle to shell weld area examination has been improved. The established technologies from the development and detailed analysis of existing control system, are expected to be applied to the similar control systems in nuclear power plants. (author). 12 refs., 4 tabs., 33 figs.

Standards guide for space and earth sciences computer software

Science.gov (United States)

Mason, G.; Chapman, R.; Klinglesmith, D.; Linnekin, J.; Putney, W.; Shaffer, F.; Dapice, R.

1972-01-01

Guidelines for the preparation of systems analysis and programming work statements are presented. The data is geared toward the efficient administration of available monetary and equipment resources. Language standards and the application of good management techniques to software development are emphasized.

Efficient Development and Verification of Safe Railway Control Software

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Peleska, Jan

2013-01-01

the monitoring process; hydraulic absorbers as dampers to dissipate the energy of oscillations in railway electric equipment; development of train fare calculation and adjustment systems using VDM++; efficient development and verification of safe railway control software; and evolution of the connectivity...

Westinghouse waste simulation and optimization software tool

International Nuclear Information System (INIS)

Mennicken, Kim; Aign, Jorg

2013-01-01

Applications for dynamic simulation can be found in virtually all areas of process engineering. The tangible benefits of using dynamic simulation can be seen in tighter design, smoother start-ups and optimized operation. Thus, proper implementation of dynamic simulation can deliver substantial benefits. These benefits are typically derived from improved process understanding. Simulation gives confidence in evidence based decisions and enables users to try out lots of 'what if' scenarios until one is sure that a decision is the right one. In radioactive waste treatment tasks different kinds of waste with different volumes and properties have to be treated, e.g. from NPP operation or D and D activities. Finding a commercially and technically optimized waste treatment concept is a time consuming and difficult task. The Westinghouse Waste Simulation and Optimization Software Tool will enable the user to quickly generate reliable simulation models of various process applications based on equipment modules. These modules can be built with ease and be integrated into the simulation model. This capability ensures that this tool is applicable to typical waste treatment tasks. The identified waste streams and the selected treatment methods are the basis of the simulation and optimization software. After implementing suitable equipment data into the model, process requirements and waste treatment data are fed into the simulation to finally generate primary simulation results. A sensitivity analysis of automated optimization features of the software generates the lowest possible lifecycle cost for the simulated waste stream. In combination with proven waste management equipments and integrated waste management solutions, this tool provides reliable qualitative results that lead to an effective planning and minimizes the total project planning risk of any waste management activity. It is thus the ideal tool for designing a waste treatment facility in an optimum manner

Westinghouse waste simulation and optimization software tool

Energy Technology Data Exchange (ETDEWEB)

Mennicken, Kim; Aign, Jorg [Westinghouse Electric Germany GmbH, Hamburg (Germany)

2013-07-01

Applications for dynamic simulation can be found in virtually all areas of process engineering. The tangible benefits of using dynamic simulation can be seen in tighter design, smoother start-ups and optimized operation. Thus, proper implementation of dynamic simulation can deliver substantial benefits. These benefits are typically derived from improved process understanding. Simulation gives confidence in evidence based decisions and enables users to try out lots of 'what if' scenarios until one is sure that a decision is the right one. In radioactive waste treatment tasks different kinds of waste with different volumes and properties have to be treated, e.g. from NPP operation or D and D activities. Finding a commercially and technically optimized waste treatment concept is a time consuming and difficult task. The Westinghouse Waste Simulation and Optimization Software Tool will enable the user to quickly generate reliable simulation models of various process applications based on equipment modules. These modules can be built with ease and be integrated into the simulation model. This capability ensures that this tool is applicable to typical waste treatment tasks. The identified waste streams and the selected treatment methods are the basis of the simulation and optimization software. After implementing suitable equipment data into the model, process requirements and waste treatment data are fed into the simulation to finally generate primary simulation results. A sensitivity analysis of automated optimization features of the software generates the lowest possible lifecycle cost for the simulated waste stream. In combination with proven waste management equipments and integrated waste management solutions, this tool provides reliable qualitative results that lead to an effective planning and minimizes the total project planning risk of any waste management activity. It is thus the ideal tool for designing a waste treatment facility in an optimum manner

Texas flexible pavements and overlays : calibration plans for M-E models and related software.

Science.gov (United States)

2013-06-01

This five-year project was initiated to collect materials and pavement performance data on a minimum of 100 highway test sections around the State of Texas, incorporating flexible pavements and overlays. Besides being used to calibrate and validate m...

Summary of Guidelines for Infection Prevention and Control for Flexible Gastrointestinal Endoscopy

Directory of Open Access Journals (Sweden)

Lawrence Hookey

2013-01-01

Full Text Available BACKGROUND: High-quality processes to ensure infection prevention and control in the delivery of safe endoscopy services are essential. In 2010, the Public Health Agency of Canada and the Canadian Association of Gastroenterology (CAG developed a Canadian guideline for the reprocessing of flexible gastrointestinal endoscopy equipment.

An interactive and flexible approach to stamping design and optimization

International Nuclear Information System (INIS)

Roy, Subir; Kunju, Ravi; Kirby, David

2004-01-01

This paper describes an efficient method that integrates finite element analysis (FEA), mesh morphing and response surface based optimization in order to implement an automated and flexible software tool to optimize stamping tool and process design. For FEA, a robust and extremely fast inverse solver is chosen. For morphing, a state of the art mesh morpher that interactively generates shape variables for optimization studies is used. The optimization algorithm utilized in this study enables a global search for a multitude of parameters and is highly flexible with regards to the choice of objective functions. A quality function that minimizes formability defects resulting from stretching and compression is implemented

Software For Computer-Aided Design Of Control Systems

Science.gov (United States)

Wette, Matthew

1994-01-01

Computer Aided Engineering System (CAESY) software developed to provide means to evaluate methods for dealing with users' needs in computer-aided design of control systems. Interpreter program for performing engineering calculations. Incorporates features of both Ada and MATLAB. Designed to be flexible and powerful. Includes internally defined functions, procedures and provides for definition of functions and procedures by user. Written in C language.

Pengukuran Overall Equipment Effectiveness (Oee) Dengan Labview 8.5 Sebagai Pengendali Maintenance

OpenAIRE

Syarief, Syafrizal

2015-01-01

Total Productive Maintenance (TPM) is a philosophy that aims to maximize the effectiveness of the facilities used in industry, it is applied to analyze problems that occur on any equipment and machinery with a method of calculation of Overall Equipment Effectiveness (OEE) of product quality. Value is determined by OEE Availability, Performance and Yield / Quality. LabVIEW (Laboratory Virtual Instrument Engineering Workbench) software is dedicated to the activities of the interface and control...

A Custom Approach for a Flexible, Real-Time and Reliable Software Defined Utility

Science.gov (United States)

2018-01-01

Information and communication technologies (ICTs) have enabled the evolution of traditional electric power distribution networks towards a new paradigm referred to as the smart grid. However, the different elements that compose the ICT plane of a smart grid are usually conceived as isolated systems that typically result in rigid hardware architectures, which are hard to interoperate, manage and adapt to new situations. In the recent years, software-defined systems that take advantage of software and high-speed data network infrastructures have emerged as a promising alternative to classic ad hoc approaches in terms of integration, automation, real-time reconfiguration and resource reusability. The purpose of this paper is to propose the usage of software-defined utilities (SDUs) to address the latent deployment and management limitations of smart grids. More specifically, the implementation of a smart grid’s data storage and management system prototype by means of SDUs is introduced, which exhibits the feasibility of this alternative approach. This system features a hybrid cloud architecture able to meet the data storage requirements of electric utilities and adapt itself to their ever-evolving needs. Conducted experimentations endorse the feasibility of this solution and encourage practitioners to point their efforts in this direction. PMID:29495599

A Custom Approach for a Flexible, Real-Time and Reliable Software Defined Utility

Directory of Open Access Journals (Sweden)

Agustín Zaballos

2018-02-01

Full Text Available Information and communication technologies (ICTs have enabled the evolution of traditional electric power distribution networks towards a new paradigm referred to as the smart grid. However, the different elements that compose the ICT plane of a smart grid are usually conceived as isolated systems that typically result in rigid hardware architectures, which are hard to interoperate, manage and adapt to new situations. In the recent years, software-defined systems that take advantage of software and high-speed data network infrastructures have emerged as a promising alternative to classic ad hoc approaches in terms of integration, automation, real-time reconfiguration and resource reusability. The purpose of this paper is to propose the usage of software-defined utilities (SDUs to address the latent deployment and management limitations of smart grids. More specifically, the implementation of a smart grid’s data storage and management system prototype by means of SDUs is introduced, which exhibits the feasibility of this alternative approach. This system features a hybrid cloud architecture able to meet the data storage requirements of electric utilities and adapt itself to their ever-evolving needs. Conducted experimentations endorse the feasibility of this solution and encourage practitioners to point their efforts in this direction.

Pros and Cons of Clinical Pathway Software Management: A Qualitative Study.

Science.gov (United States)

Aarnoutse, M F; Brinkkemper, S; de Mul, M; Askari, M

2018-01-01

In this study we aimed to assess the perceived effectiveness of clinical pathway management software for healthcare professionals. A case study on the clinical pathway management software program Check-It was performed in three departments at an academic medical center. Four months after the implementation of the software, interviews were held with healthcare professionals who work with the system. The interview questions were posed in a semi-structured interview format and the participant were asked about the perceived positive or negative effects of Check-It, and whether they thought the software is effective for them. The interviews were recorded and transcribed based on grounded theory, using different coding techniques. Our results showed fewer overlooked tasks, pre-filled orders and letters, better overview, and increased protocol insight as positive aspects of using the software. Being not flexible enough was experienced as a negative aspect.

Adaptive Neuro-Fuzzy Inference System Models for Force Prediction of a Mechatronic Flexible Structure

DEFF Research Database (Denmark)

Achiche, S.; Shlechtingen, M.; Raison, M.

2016-01-01

This paper presents the results obtained from a research work investigating the performance of different Adaptive Neuro-Fuzzy Inference System (ANFIS) models developed to predict excitation forces on a dynamically loaded flexible structure. For this purpose, a flexible structure is equipped...... obtained from applying a random excitation force on the flexible structure. The performance of the developed models is evaluated by analyzing the prediction capabilities based on a normalized prediction error. The frequency domain is considered to analyze the similarity of the frequencies in the predicted...... of the sampling frequency and sensor location on the model performance is investigated. The results obtained in this paper show that ANFIS models can be used to set up reliable force predictors for dynamical loaded flexible structures, when a certain degree of inaccuracy is accepted. Furthermore, the comparison...

Constraint-Driven Software Design: An Escape from the Waterfall Model.

Science.gov (United States)

de Hoog, Robert; And Others

1994-01-01

Presents the principles of a development methodology for software design based on a nonlinear, product-driven approach that integrates quality aspects. Two examples are given to show that the flexibility needed for building high quality systems leads to integrated development environments in which methodology, product, and tools are closely…

PyPedal, an open source software package for pedigree analysis

Science.gov (United States)

The open source software package PyPedal (http://pypedal.sourceforge.net/) was first released in 2002, and provided users with a set of simple tools for manipulating pedigrees. Its flexibility has been demonstrated by its used in a number of settings for large and small populations. After substantia...

StOCNET : Software for the statistical analysis of social networks

NARCIS (Netherlands)

Huisman, M.; van Duijn, M.A.J.

2003-01-01

StOCNET3 is an open software system in a Windows environment for the advanced statistical analysis of social networks. It provides a platform to make a number of recently developed and therefore not (yet) standard statistical methods available to a wider audience. A flexible user interface utilizing

CLAIRE, an event-driven simulation tool for testing software

International Nuclear Information System (INIS)

Raguideau, J.; Schoen, D.; Henry, J.Y.; Boulc'h, J.

1994-06-01

CLAIRE is a software tool created to perform validations on executable codes or on specifications of distributed real-time applications for nuclear safety. CLAIRE can be used both to verify the safety properties by modelling the specifications, and also to validate the final code by simulating the behaviour of its equipment and software interfaces. It can be used to observe and provide dynamic control of the simulation process, and also to record changes to the simulated data for off-line analysis. (R.P.)

Open-Source 3D-Printable Optics Equipment

Science.gov (United States)

Zhang, Chenlong; Anzalone, Nicholas C.; Faria, Rodrigo P.; Pearce, Joshua M.

2013-01-01

Just as the power of the open-source design paradigm has driven down the cost of software to the point that it is accessible to most people, the rise of open-source hardware is poised to drive down the cost of doing experimental science to expand access to everyone. To assist in this aim, this paper introduces a library of open-source 3-D-printable optics components. This library operates as a flexible, low-cost public-domain tool set for developing both research and teaching optics hardware. First, the use of parametric open-source designs using an open-source computer aided design package is described to customize the optics hardware for any application. Second, details are provided on the use of open-source 3-D printers (additive layer manufacturing) to fabricate the primary mechanical components, which are then combined to construct complex optics-related devices. Third, the use of the open-source electronics prototyping platform are illustrated as control for optical experimental apparatuses. This study demonstrates an open-source optical library, which significantly reduces the costs associated with much optical equipment, while also enabling relatively easily adapted customizable designs. The cost reductions in general are over 97%, with some components representing only 1% of the current commercial investment for optical products of similar function. The results of this study make its clear that this method of scientific hardware development enables a much broader audience to participate in optical experimentation both as research and teaching platforms than previous proprietary methods. PMID:23544104

Open-source 3D-printable optics equipment.

Science.gov (United States)

Zhang, Chenlong; Anzalone, Nicholas C; Faria, Rodrigo P; Pearce, Joshua M

2013-01-01

Just as the power of the open-source design paradigm has driven down the cost of software to the point that it is accessible to most people, the rise of open-source hardware is poised to drive down the cost of doing experimental science to expand access to everyone. To assist in this aim, this paper introduces a library of open-source 3-D-printable optics components. This library operates as a flexible, low-cost public-domain tool set for developing both research and teaching optics hardware. First, the use of parametric open-source designs using an open-source computer aided design package is described to customize the optics hardware for any application. Second, details are provided on the use of open-source 3-D printers (additive layer manufacturing) to fabricate the primary mechanical components, which are then combined to construct complex optics-related devices. Third, the use of the open-source electronics prototyping platform are illustrated as control for optical experimental apparatuses. This study demonstrates an open-source optical library, which significantly reduces the costs associated with much optical equipment, while also enabling relatively easily adapted customizable designs. The cost reductions in general are over 97%, with some components representing only 1% of the current commercial investment for optical products of similar function. The results of this study make its clear that this method of scientific hardware development enables a much broader audience to participate in optical experimentation both as research and teaching platforms than previous proprietary methods.

Open-source 3D-printable optics equipment.

Directory of Open Access Journals (Sweden)

Chenlong Zhang

Full Text Available Just as the power of the open-source design paradigm has driven down the cost of software to the point that it is accessible to most people, the rise of open-source hardware is poised to drive down the cost of doing experimental science to expand access to everyone. To assist in this aim, this paper introduces a library of open-source 3-D-printable optics components. This library operates as a flexible, low-cost public-domain tool set for developing both research and teaching optics hardware. First, the use of parametric open-source designs using an open-source computer aided design package is described to customize the optics hardware for any application. Second, details are provided on the use of open-source 3-D printers (additive layer manufacturing to fabricate the primary mechanical components, which are then combined to construct complex optics-related devices. Third, the use of the open-source electronics prototyping platform are illustrated as control for optical experimental apparatuses. This study demonstrates an open-source optical library, which significantly reduces the costs associated with much optical equipment, while also enabling relatively easily adapted customizable designs. The cost reductions in general are over 97%, with some components representing only 1% of the current commercial investment for optical products of similar function. The results of this study make its clear that this method of scientific hardware development enables a much broader audience to participate in optical experimentation both as research and teaching platforms than previous proprietary methods.

Polarization-, carrier-, and format-selectable optical flow generation based on a multi-flow transmitter using passive polymers

DEFF Research Database (Denmark)

Katopodis, V.; Spyropoulou, M.; Tsokos, C.

2016-01-01

and acting as the interface between any software defined switch and the physical layer transport equipment. The transmitter has been evaluated within a flexible network node comprising programmable flexible wavelength selective switches (WSSs). Two single-flow scenarios based on a dual-polarization m...... generation is feasible with appropriate distribution of the client data in the digital domain and encapsulation into OTN containers. Configuration of the electrical and optical transmitter resources is performed via a developed software defined optics (SDO) platform residing on top of the transmitter...

Real-Time Software for the Compass Tokamak Plasma Control

Energy Technology Data Exchange (ETDEWEB)

Valcarcel, D.F.; Duarte, A.S.; Neto, A.; Carvalho, I.S.; Carvalho, B.B.; Fernandes, H.; Sousa, J. [Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Lisboa (Portugal); Sartori, F. [Euratom-UKAEA, Culham Science Centre, Abingdon, OX14 3DB Oxon (United Kingdom); Janky, F.; Cahyna, P.; Hron, M.; Panek, R. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM / IPP.CR, Prague (Costa Rica)

2009-07-01

This poster presents the flexible and high-performance real time system that guarantees the desired time cycles for plasma control on the COMPASS tokamak: 500 {mu}s for toroidal field, current, equilibrium and shaping; 50 {mu}s for fast control of the equilibrium and vertical instability. This system was developed on top of a high-performance processor and a software framework (MARTe) tailored for real-time. The preliminary measurements indicate that the time constraints will be met on the final solution. The system allows the making of modifications in the future to improve software components. (A.C.)

Agility in a small software firm

DEFF Research Database (Denmark)

Schmidt, Thomas; Mathiassen, Lars

2009-01-01

Small software firms are vulnerable to environmental uncertainty. While agile methods and other technologies offer suggestions to this challenge, we know little about how these firms combine project and firm level capabilities to effectively respond to changes. On this backdrop, we examine a small...... Danish software firm, TeachTech Inc., through the lens of Haeckel's sense-and-respond approach. Our analysis suggests that: the firm has appropriate sense-and-respond cycles, but improving process modularity and human resource flexibility, could increase its ability to respond faster and more effectively......; the firm focuses on specific business goals, but these are not clearly explicated and expressed as empowering governing values enabling a quick and coordinated response; complex and demanding challenges are related to dynamically reassigning commitments and the supporting mechanisms are insufficient...

Performance of simulated flexible integrated gasification polygeneration facilities. Part A: A technical-energetic assessment

NARCIS (Netherlands)

Meerman, J.C.; Ramírez Ramírez, C.A.; Turkenburg, W.C.; Faaij, A.P.C.

2011-01-01

This article investigates technical possibilities and performances of flexible integrated gasification polygeneration (IG-PG) facilities equipped with CO2 capture for the near future. These facilities can produce electricity during peak hours, while switching to the production of chemicals during

Software for dimensioning of hydraulic ram; Software para dimensionamento de carneiro hidraulico

Energy Technology Data Exchange (ETDEWEB)

Borges Neto, Manuel Rangel [Centro Federal de Educacao Tecnologica de Petrolina, CE (Brazil); Borges, Grace Anne Pontes [Faculdade de Tecnologia de Sao Paulo (FATEC), Sao Paulo, SP (Brazil). Dept. de Processamento de Dados; Borges, Everton Pontes [Centro Federal de Educacao Tecnologica do Rio Grande do Norte, Natal, RN (Brazil). Curso Tecnologia em Automacao Industrial

2004-07-01

The search for new renewable energy sources sometimes takes us always from existing solutions applications. The hydraulic ram is equipment developed in 1796, used to water pumping, without using electricity energy and can be used for small rural producer in places where the conventional electricity grid access is limited. The objective of this work is Software introducing, developed to help a commercial hydraulic ram dimensioning, which isn't necessary previous hydraulic knowledge, and can also be used as a didactic resource at technicians and technologists courses in subjects as hydraulics or irrigation. (author)

Application of software technology to a future spacecraft computer design

Science.gov (United States)

Labaugh, R. J.

1980-01-01

A study was conducted to determine how major improvements in spacecraft computer systems can be obtained from recent advances in hardware and software technology. Investigations into integrated circuit technology indicated that the CMOS/SOS chip set being developed for the Air Force Avionics Laboratory at Wright Patterson had the best potential for improving the performance of spaceborne computer systems. An integral part of the chip set is the bit slice arithmetic and logic unit. The flexibility allowed by microprogramming, combined with the software investigations, led to the specification of a baseline architecture and instruction set.

Building Flexible Manufacturing Systems Based on Peer-Its

Directory of Open Access Journals (Sweden)

M. Hechinger

2008-02-01

Full Text Available Peer-to-peer computing principles have started to pervade into mechanical control systems, inducing a paradigm shift from centralized to autonomic control. We have developed a self-contained, miniaturized, universal and scalable peer-to-peer based hardware-software system, the peer-it platform, to serve as a stick-on computer solution to raise real-world artefacts like, for example, machines, tools, or appliances towards technology-rich, autonomous, self-induced, and context-aware peers, operating as spontaneously interacting ensembles. The peer-it platform integrates sensor, actuator, and wireless communication facilities on the hardware level, with an object-oriented, component-based coordination framework at the software level, thus providing a generic platform for sensing, computing, controlling, and communication on a large scale. The physical appearance of a peer-it supports pinning it to real-world artefacts, while at the same time integrating those artefacts into a mobile ad hoc network of peers. Peer-it networks thus represent ensembles of coordinated artefacts, exhibiting features of autonomy like self-management at the node level and self-organization at the network level. We demonstrate how the peer-it system implements the desired flexibility in automated manufacturing systems to react in the case of changes, whether intended or unexpectedly occuring. The peer-it system enables machine flexibility in that it adapts production facilities to produce new types of products, or change the order of operation executed on parts instantaneously. Secondly, it enables routing flexibility, that is, the ability to use multiple machines to spontaneously perform the same operation on one part alternatively (to implement autonomic fault tolerance or to absorb large-scale changes in volume, capacity, or capability (to implement autonomic scalability.

Web software for the control and management of radiation protection devices in the Cadarache site

International Nuclear Information System (INIS)

Beltritti, F.

2010-01-01

This series of slides presents how to use a new software dedicated to the management of the periodical controls that have to be performed on the equipment involved in radiation protection. This software is ready to be dispatched on the CEA site of Cadarache. This software gives information on: the device to be controlled, the controls that have to be performed, the procedures to follow to make the test, the equipment necessary for the test particularly the need for radioactive sources, the maintenance of the device, the previous measurements and in the end the device's conformity. An evaluation of the conformity of all the devices present in a building or an area or of a particular type can be easily obtained. (A.C.)

Simulation of a flexible wind turbine response to a grid fault

DEFF Research Database (Denmark)

Hansen, Anca Daniela; Cutululis, Nicolaos Antonio; Sørensen, Poul Ejnar

2007-01-01

The purpose of this work is to illustrate the impact of a grid fault on the mechanical loads of a wind turbine. Grid faults generate transients in the generator electromagnetic torque, which are propagated in the wind turbine, stressing its mechanical components. Grid faults are normally simulated...... in power system simulation tools applying simplified mechanical models of the drive train. This paper presents simulations of the wind turbine load response to grid faults with an advanced aeroelastic computer code (HAWC2). The core of this code is an advanced model for the flexible structure of the wind...... turbines, taking the flexibility of the tower, blades and other components of the wind turbines into account. The effect of a grid fault on the wind turbine flexible structure is assessed for a typical fixed speed wind turbine, equipped with an induction generator....

Dynamic Flow Migration for Delay Constrained Traffic in Software-Defined Networks

NARCIS (Netherlands)

Berger, Andre; Gross, James; Danielis, Peter; Dán, György

2017-01-01

Various industrial control applications have stringent end-to-end latency requirements in the order of a few milliseconds. Software-defined networking (SDN) is a promising solution in order to meet these stringent requirements under varying traffic patterns, as it enables the flexible management of

Network Coded Software Defined Networking

DEFF Research Database (Denmark)

Hansen, Jonas; Roetter, Daniel Enrique Lucani; Krigslund, Jeppe

2015-01-01

Software defined networking has garnered large attention due to its potential to virtualize services in the Internet, introducing flexibility in the buffering, scheduling, processing, and routing of data in network routers. SDN breaks the deadlock that has kept Internet network protocols stagnant...... for decades, while applications and physical links have evolved. This article advocates for the use of SDN to bring about 5G network services by incorporating network coding (NC) functionalities. The latter constitutes a major leap forward compared to the state-of-the- art store and forward Internet paradigm...

46 CFR 298.2 - Definitions.

Science.gov (United States)

2010-10-01

... control equipment, computerized flexible manufacturing systems, associated computer software, and other... practice, and to promote sustainable development, including engineering design, quality assurance..., partnership, limited partnership, joint venture, association, joint-stock company, trust, unincorporated...

Determination of the number of software tests using probabilistic safety assessment

International Nuclear Information System (INIS)

Kang, H. K.; Seong, T. Y.; Lee, K. Y.

2000-01-01

The broader usage of digital equipment in nuclear power plants gives rise to the safety problems of software. The field test should be performed before the software is used in critical applications because it is well known that software shows non-linear response when it is applied to different target systems in different environment. In the case of safety-critical applications, the result of tests contains usually zero failure case and the satisfiable number of tests is hard to be determined. In this paper, we suggests the method to determine the number of software tests without failure using the probabilistic safety assessment. From the result of the probabilistic safety assessment on total system, the desirable unavailability of software is calculated and the number of tests is determined

Flexibility analysis of main primary heat transport system : Narora Atomic Power Project

International Nuclear Information System (INIS)

Rastogi, S.K.

1975-01-01

The paper presents flexibility analysis problem of main primary heat transport system and the approximate analysis that has been made to estimate the loads coming on major equipments. The primary heat transport system for Narora Atomic Power Project is adopting vertical steam generators and pumps equally divided on either side of the reactor with inter-connecting pipes and feeders. Since the system is mainly spring supported with movement of a few points in certain direction defined but no anchorage, it represents a good problem for flexibility analysis which can only be solved in one step by developing a good computer programme. (author)

Generic Software Architecture for Launchers

Science.gov (United States)

Carre, Emilien; Gast, Philippe; Hiron, Emmanuel; Leblanc, Alain; Lesens, David; Mescam, Emmanuelle; Moro, Pierre

2015-09-01

The definition and reuse of generic software architecture for launchers is not so usual for several reasons: the number of European launcher families is very small (Ariane 5 and Vega for these last decades); the real time constraints (reactivity and determinism needs) are very hard; low levels of versatility are required (implying often an ad hoc development of the launcher mission). In comparison, satellites are often built on a generic platform made up of reusable hardware building blocks (processors, star-trackers, gyroscopes, etc.) and reusable software building blocks (middleware, TM/TC, On Board Control Procedure, etc.). If some of these reasons are still valid (e.g. the limited number of development), the increase of the available CPU power makes today an approach based on a generic time triggered middleware (ensuring the full determinism of the system) and a centralised mission and vehicle management (offering more flexibility in the design and facilitating the long term maintenance) achievable. This paper presents an example of generic software architecture which could be envisaged for future launchers, based on the previously described principles and supported by model driven engineering and automatic code generation.

Control strategies used in the control software for the Heavy Ion Research Facility in Lanzhou

Energy Technology Data Exchange (ETDEWEB)

Zhou, Wen-Xiong [College of Power Engineering, Chongqing University, Chongqing 400044 (China); Postdoctoral Station, Chongqing University, Chongqing 400044 (China); Wang, Yan-Yu [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Pan, Liang-Ming [College of Power Engineering, Chongqing University, Chongqing 400044 (China); Tu, Sheng-Pan [State Grid Chongqing Maintenance Company, Chongqing 400044 (China)

2016-07-01

Automation control systems are important for the operation of an accelerator. To ensure the reliable, stable and flexible operation of the Heavy Ion Research Facility in Lanzhou (HIRFL), several control systems are developed. The developed control systems are the SECRAL control system, the LECR3 control system, the LAPECR1 control system and the Electro-Static septum control system. The corresponding control software systems are developed using Visual C++. To ensure the accuracy, stability and flexibility of the control systems, some special control strategies are developed in the control software systems. This paper provides a detailed description of the main control strategies used in the control software systems. The main control strategies are composed of a reliable communication mechanism, a correct data/command transmission mechanism, an efficient data storage mechanism and an interlock protection mechanism. To guarantee a reliable communication between the devices for the commercially purchased devices and the built in-house ones, a modified heartbeat method is developed. To provide flexible reconstitution function for the control systems, the command queue and the state machine are combined. The message mechanism and the multiple windows mechanism are also used for the module mechanism. The relevant control systems are introduced as examples of these control strategies. These systems have been running stably for several years.

Control strategies used in the control software for the Heavy Ion Research Facility in Lanzhou

International Nuclear Information System (INIS)

Zhou, Wen-Xiong; Wang, Yan-Yu; Pan, Liang-Ming; Tu, Sheng-Pan

2016-01-01

Automation control systems are important for the operation of an accelerator. To ensure the reliable, stable and flexible operation of the Heavy Ion Research Facility in Lanzhou (HIRFL), several control systems are developed. The developed control systems are the SECRAL control system, the LECR3 control system, the LAPECR1 control system and the Electro-Static septum control system. The corresponding control software systems are developed using Visual C++. To ensure the accuracy, stability and flexibility of the control systems, some special control strategies are developed in the control software systems. This paper provides a detailed description of the main control strategies used in the control software systems. The main control strategies are composed of a reliable communication mechanism, a correct data/command transmission mechanism, an efficient data storage mechanism and an interlock protection mechanism. To guarantee a reliable communication between the devices for the commercially purchased devices and the built in-house ones, a modified heartbeat method is developed. To provide flexible reconstitution function for the control systems, the command queue and the state machine are combined. The message mechanism and the multiple windows mechanism are also used for the module mechanism. The relevant control systems are introduced as examples of these control strategies. These systems have been running stably for several years.

FLEXIBILITY OF INDUSTRIAL “PRODUCT-SERVICE” SYSTEM: IMPLEMENTATION AND MEANS OF MEASUREMENT

Directory of Open Access Journals (Sweden)

S. Panteleev

2016-01-01

Full Text Available Article is devoted to the analysis of the flexibility of industrial “product-service” systems (hereafter IPSS, meaning provision of adaptability to the changing needs of users along the life-cycle of IPSS. Flexibility of the system gives company-producer of the industrial equipment competitive advantages on the b-to-b market. Due to this reason development and improvement of the means of valuation of flexibility is an important field of study. Aim of the article is IPSS flexibility analysis and development of efficient means of flexibility valuation.Article tasks. Research the advantages of the IPSS flexibility; analyze problems that arise as the result of flexibility implementation; propose ways to solve these problems.Methodology. Methodological base of the article are the following scientific methods: deduction, comparative and individual analysis, methods of systematization and generalization of theoretical materials.Results. Conclusions / importance. Article proposes to use IPSS concept model that takes into consideration IPSS resources, actions and functions. With the help of this model switching options, that reflect the flexibility of IPSS, can be defi ned. Economic and technological aspects of changes should be taken into consideration with the help of integrated, iterative approach, that compares supplier costs on flexibility implementation and the clients desire to pay for it. At the same time supplier can calculate the potential profi t from provision of fl exibility. Thus, the basis for efficient decision making when the IPSS is structures is made.

Development of a Test Equipment for Performance Evaluation of Safety Systems

International Nuclear Information System (INIS)

Kim, S. J.; Kwon, S. M.; Lee, J. M.; Kim, C. K.; Cho, C. H.; Chun, J. H.; Park, M. K.

2004-07-01

The purpose of this study is to develop a test equipment for performance evaluation of safety systems in nuclear power plants. First, we develop an input-output simulator for reactor protection systems, ESF component control systems, and a data acquisition system for these I/O simulators as a hardware for this equipment. Then, we develop a software for human-machine interface system, which is easy-to-use and easy-to-modify. In addition, a simulation tool for a reactor trip switch gear is developed

Simulation and Flexibility Analysis of Milk Production Process

DEFF Research Database (Denmark)

Cheng, Hongyuan; Friis, Alan

. Such flexible dairy production line can adjust its production pace in manufacturing different products without replacing existing equipment in the production line. In this work, the dairy process simulator is applied to study the flexibility of milk production line. In the same production line, various......In this work, process simulation method is used to simulate pasteurised market milk production line. A commercial process simulation tool - Pro/II from Simulation Science Inc. is used in the simulation work. In the simulation, a new model is used to calculate the thermal property of milk....... In this work, a simulator is obtained for the milk production line. Using the simulator, different milk processing situation can be quantitatively simulated investigated, such as different products production, capacity changes, fat content changes in raw milk, energy cost at different operation conditions etc...

A Middleware Platform for Providing Mobile and Embedded Computing Instruction to Software Engineering Students

Science.gov (United States)

Mattmann, C. A.; Medvidovic, N.; Malek, S.; Edwards, G.; Banerjee, S.

2012-01-01

As embedded software systems have grown in number, complexity, and importance in the modern world, a corresponding need to teach computer science students how to effectively engineer such systems has arisen. Embedded software systems, such as those that control cell phones, aircraft, and medical equipment, are subject to requirements and…

Tailorable software architectures in the accelerator control system environment

International Nuclear Information System (INIS)

Mejuev, Igor; Kumagai, Akira; Kadokura, Eiichi

2001-01-01

Tailoring is further evolution of an application after deployment in order to adapt it to requirements that were not accounted for in the original design. End-user tailorability has been extensively researched in applied computer science from HCl and software engineering perspectives. Tailorability allows coping with flexibility requirements, decreasing maintenance and development costs of software products. In general, dynamic or diverse software requirements constitute the need for implementing end-user tailorability in computer systems. In accelerator physics research the factor of dynamic requirements is especially important, due to frequent software and hardware modifications resulting in correspondingly high upgrade and maintenance costs. In this work we introduce the results of feasibility study on implementing end-user tailorability in the software for accelerator control system, considering the design and implementation of distributed monitoring application for 12 GeV KEK Proton Synchrotron as an example. The software prototypes used in this work are based on a generic tailoring platform (VEDICI), which allows decoupling of tailoring interfaces and runtime components. While representing a reusable application-independent framework, VEDICI can be potentially applied for tailoring of arbitrary compositional Web-based applications

Lessons learned in testing of Safeguards equipment

International Nuclear Information System (INIS)

Pepper, Susan; Farnitano, Michael; Carelli, Joseph

2001-01-01

Full text: During the 1990s, the IAEA Department of Safeguards began a transition from analog to digital equipment. This included surveillance equipment, seals, NDA measurement systems, and other instruments. The transition to digital equipment was intended to facilitate compatibility between and integration of instruments, remote communication of data, improved data storage, and modernization. Many of the instruments are designed to operate on battery power during loss of facility power, and therefore, are designed to consume minimal power. In 2000, the IAEA experienced a number of failures in digital image surveillance (DIS) equipment. A study of the performance data revealed that the failures occurred in 'high risk' environments where the systems were exposed to neutrons. As a supporter of IAEA equipment development and implementation, the U.S. Support Program worked with the IAEA, the equipment designer, and the equipment manufacturer in special meetings on DIS to determine the cause of the failures. It was as a result of these meetings that single event upset (SEU) was determined to be the root cause of the failures. The meeting participants also identified a list of actions to improve the reliability of DIS systems. As a result of the DIS meetings and the identified actions, the U.S. Support Program approved a request from the IAEA and established Task E.125, 'Remote Monitoring and Unattended Digital Surveillance Systems.' This task is an umbrella task intended to provide a mechanism for response to IAEA needs related to improving the reliability of unattended, remote monitoring and DIS equipment. Subtasks approved under this task include: E.125.1, 'SDIS Software Consolidation and DCM-14 Audit' - This subtask involves the consolidation of a number of individual upgrades to the SDIS and review of the DCM-14 software. As the sponsor of the design of the DCM-14 by Dr. Neumann, the German Support Program is also a participant in this subtask; E.125.2, 'DIS

FAS: Using FPGA to Accelerate and Secure SDN Software Switches

Directory of Open Access Journals (Sweden)

Wenwen Fu

2018-01-01

Full Text Available Software-Defined Networking (SDN promises the vision of more flexible and manageable networks but requires certain level of programmability in the data plane to accommodate different forwarding abstractions. SDN software switches running on commodity multicore platforms are programmable and are with low deployment cost. However, the performance of SDN software switches is not satisfactory due to the complex forwarding operations on packets. Moreover, this may hinder the performance of real-time security on software switch. In this paper, we analyze the forwarding procedure and identify the performance bottleneck of SDN software switches. An FPGA-based mechanism for accelerating and securing SDN switches, named FAS (FPGA-Accelerated SDN software switch, is proposed to take advantage of the reconfigurability and high-performance advantages of FPGA. FAS improves the performance as well as the capacity against malicious traffic attacks of SDN software switches by offloading some functional modules. We validate FAS on an FPGA-based network processing platform. Experiment results demonstrate that the forwarding rate of FAS can be 44% higher than the original SDN software switch. In addition, FAS provides new opportunity to enhance the security of SDN software switches by allowing the deployment of bump-in-the-wire security modules (such as packet detectors and filters in FPGA.

Software Reuse Within the Earth Science Community

Science.gov (United States)

Marshall, James J.; Olding, Steve; Wolfe, Robert E.; Delnore, Victor E.

2006-01-01

similar, with the second, larger survey confirming the basic results of the first, smaller survey. The results suggest that reuse of ESE software can drive down the cost and time of system development, increase flexibility and responsiveness of these systems to new technologies and requirements, and increase effective and accountable community participation.

RapidRMSD: Rapid determination of RMSDs corresponding to motions of flexible molecules.

Science.gov (United States)

Neveu, Emilie; Popov, Petr; Hoffmann, Alexandre; Migliosi, Angelo; Besseron, Xavier; Danoy, Grégoire; Bouvry, Pascal; Grudinin, Sergei

2018-03-15

The root mean square deviation (RMSD) is one of the most used similarity criteria in structural biology and bioinformatics. Standard computation of the RMSD has a linear complexity with respect to the number of atoms in a molecule, making RMSD calculations time-consuming for the large-scale modeling applications, such as assessment of molecular docking predictions or clustering of spatially proximate molecular conformations. Previously we introduced the RigidRMSD algorithm to compute the RMSD corresponding to the rigid-body motion of a molecule. In this study we go beyond the limits of the rigid-body approximation by taking into account conformational flexibility of the molecule. We model the flexibility with a reduced set of collective motions computed with e.g. normal modes or principal component analysis. The initialization of our algorithm is linear in the number of atoms and all the subsequent evaluations of RMSD values between flexible molecular conformations depend only on the number of collective motions that are selected to model the flexibility. Therefore, our algorithm is much faster compared to the standard RMSD computation for large-scale modeling applications. We demonstrate the efficiency of our method on several clustering examples, including clustering of flexible docking results and molecular dynamics (MD) trajectories. We also demonstrate how to use the presented formalism to generate pseudo-random constant-RMSD structural molecular ensembles and how to use these in cross-docking. We provide the algorithm written in C ++ as the open-source RapidRMSD library governed by the BSD-compatible license, which is available at http://team.inria.fr/nano-d/software/RapidRMSD/. The constant-RMSD structural ensemble application and clustering of MD trajectories is available at http://team.inria.fr/nano-d/software/nolb-normal-modes/. sergei.grudinin@inria.fr. Supplementary data are available at Bioinformatics.

Communication from the Permanent Mission of the Russian Federation to the International Atomic Energy Agency regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-12-10

The Director General of the International Atomic Energy Agency has received a Note Verbale from the Permanent Mission of the Russian Federation providing information on the export policies and practices of the Government of the Russian Federation with respect to the export of nuclear-related dual-use equipment, materials, software and related technology. In the light of the wish expressed at the end of the Note Verbale, the text of the Note Verbale is attached. The attachment to the Note Verbale was issued previously as INFCIRC/2541Rev. 4/Part 2.

Communication from the Permanent Mission of the Russian Federation to the International Atomic Energy Agency regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

International Nuclear Information System (INIS)

2001-01-01

The Director General of the International Atomic Energy Agency has received a Note Verbale from the Permanent Mission of the Russian Federation providing information on the export policies and practices of the Government of the Russian Federation with respect to the export of nuclear-related dual-use equipment, materials, software and related technology. In the light of the wish expressed at the end of the Note Verbale, the text of the Note Verbale is attached. The attachment to the Note Verbale was issued previously as INFCIRC/2541Rev. 4/Part 2

Overexposure of patients due to malfunctions or defects in radiation equipment

International Nuclear Information System (INIS)

Gill, J.R.

1992-01-01

Some 38 incidents involving patient overexposure due to malfunctions or defects in radiation equipment were notified to HSE between 1986 and 1990. Of these cases, 30 involved diagnostic X ray equipment, while the remainder involved nuclear medicine or radiotherapy equipment. Those cases involving X ray equipment are examined in detail and grouped into six categories. The numbers of patients affected varied. In one case an estimated 350 patients were affected: in another, 240; while 13 cases affected only a single patient. A very rough estimate of the collective effective dose equivalent in the 30 cases comes to 5 man sieverts. It is concluded that improvements are needed in fault finding procedures, and guidance is needed on consistent methods of dose estimation and reporting. Improvements for the longer term include the selection of reliable components during manufacture; application of HSE guidance in software design for programmable electronic systems; and equipment design to incorporate fault detection and inhibition of operation to prevent excessive exposures

Studies and research concerning BNFP: cask handling equipment standardization

International Nuclear Information System (INIS)

McCreery, P.N.

1980-10-01

This report covers the activities of one of the sub-tasks within the Spent LWR Fuel Transportation Receiving, Handling, and Storage program. The sub-task is identified as Cask Handling Equipment Standardization. The objective of the sub-task specifies: investigate and identify opportunities for standardization of cask interface equipment. This study will examine the potential benefits of standardized yokes, decontamination barriers and special tools, and, to the extent feasible, standardized methods and software for handling the variety of casks presently available in the US fleet. The result of the investigations is a compilation of reports that are related by their common goal of reducing cask turnaround time

Run permit software for the proton storage ring

International Nuclear Information System (INIS)

Bair, S.S.

1985-01-01

The Run Permit system is intended to protect equipment from radiation effects caused by having beam enabled when required equipment is not operational. This system will not allow beam unless certain devices are ready and will drop beam if any of these devices become inoperative. A system to provide such protection might be implemented in hardware. However, because the several operating modes of the Proton Storage Ring/Weapons Neutron Research facility require certain devices to be in different states (depending on mode), a dynamic configuration capability is needed, that is, a software solution is more feasible

Large Scale Software Building with CMake in ATLAS

Science.gov (United States)

Elmsheuser, J.; Krasznahorkay, A.; Obreshkov, E.; Undrus, A.; ATLAS Collaboration

2017-10-01

The offline software of the ATLAS experiment at the Large Hadron Collider (LHC) serves as the platform for detector data reconstruction, simulation and analysis. It is also used in the detector’s trigger system to select LHC collision events during data taking. The ATLAS offline software consists of several million lines of C++ and Python code organized in a modular design of more than 2000 specialized packages. Because of different workflows, many stable numbered releases are in parallel production use. To accommodate specific workflow requests, software patches with modified libraries are distributed on top of existing software releases on a daily basis. The different ATLAS software applications also require a flexible build system that strongly supports unit and integration tests. Within the last year this build system was migrated to CMake. A CMake configuration has been developed that allows one to easily set up and build the above mentioned software packages. This also makes it possible to develop and test new and modified packages on top of existing releases. The system also allows one to detect and execute partial rebuilds of the release based on single package changes. The build system makes use of CPack for building RPM packages out of the software releases, and CTest for running unit and integration tests. We report on the migration and integration of the ATLAS software to CMake and show working examples of this large scale project in production.

Software package for the design and analysis of DNA origami structures

DEFF Research Database (Denmark)

Andersen, Ebbe Sloth; Nielsen, Morten Muhlig; Dong, Mingdong

was observed on the mica surface with a fraction of the dolphin nanostructures showing extensive tail flexibility of approximately 90 degrees. The Java editor and tools are free software distributed under the GNU license. The open architecture of the editor makes it easy for the scientific community......A software package was developed for the semi-automated design of DNA origamis and further data analysis of Atomic Force Microscopy (AFM) images. As an example, we design the shape of a bottlenose dolphin and analyze it by means of high resolution AFM imaging. A high yield of DNA dolphins...... to contribute new tools and functionalities. Documentation, tutorials and software will be made available online....

Modularity and Architecture of PLC-based Software for Automated Production Systems: An analysis in industrial companies

OpenAIRE

B. Vogel-Heuser, J. Fischer, S. Feldmann, S. Ulewicz, S. Rösch

2018-01-01

Adaptive and flexible production systems require modular and reusable software especially considering their long-term life cycle of up to 50 years. SWMAT4aPS, an approach to measure Software Maturity for automated Production Systems is introduced. The approach identifies weaknesses and strengths of various companies’ solutions for modularity of software in the design of automated Production Systems (aPS). At first, a self-assessed questionnaire is used to evaluate a large number of companies ...

Verification of operating software for cooperative monitoring applications

International Nuclear Information System (INIS)

Tolk, K.M.; Rembold, R.K.

1997-01-01

Monitoring agencies often use computer based equipment to control instruments and to collect data at sites that are being monitored under international safeguards or other cooperative monitoring agreements. In order for this data to be used as an independent verification of data supplied by the host at the facility, the software used must be trusted by the monitoring agency. The monitoring party must be sure that the software has not be altered to give results that could lead to erroneous conclusions about nuclear materials inventories or other operating conditions at the site. The host might also want to verify that the software being used is the software that has been previously inspected in order to be assured that only data that is allowed under the agreement is being collected. A description of a method to provide this verification using keyed has functions and how the proposed method overcomes possible vulnerabilities in methods currently in use such as loading the software from trusted disks is presented. The use of public key data authentication for this purpose is also discussed

Image enhancement software for underwater recovery operations: User's manual

Science.gov (United States)

Partridge, William J.; Therrien, Charles W.

1989-06-01

This report describes software for performing image enhancement on live or recorded video images. The software was developed for operational use during underwater recovery operations at the Naval Undersea Warfare Engineering Station. The image processing is performed on an IBM-PC/AT compatible computer equipped with hardware to digitize and display video images. The software provides the capability to provide contrast enhancement and other similar functions in real time through hardware lookup tables, to automatically perform histogram equalization, to capture one or more frames and average them or apply one of several different processing algorithms to a captured frame. The report is in the form of a user manual for the software and includes guided tutorial and reference sections. A Digital Image Processing Primer in the appendix serves to explain the principle concepts that are used in the image processing.

Modeling of a 3DTV service in the software-defined networking architecture

Science.gov (United States)

Wilczewski, Grzegorz

2014-11-01

In this article a newly developed concept towards modeling of a multimedia service offering stereoscopic motion imagery is presented. Proposed model is based on the approach of utilization of Software-defined Networking or Software Defined Networks architecture (SDN). The definition of 3D television service spanning SDN concept is identified, exposing basic characteristic of a 3DTV service in a modern networking organization layout. Furthermore, exemplary functionalities of the proposed 3DTV model are depicted. It is indicated that modeling of a 3DTV service in the Software-defined Networking architecture leads to multiplicity of improvements, especially towards flexibility of a service supporting heterogeneity of end user devices.

Development of digital power measuring and protecting equipment for SPRR-300 reactor

International Nuclear Information System (INIS)

Wang Xuejie; Li Xi'an; Zhu Shilei

2005-01-01

A measuring and protecting equipment of reactor power based on Single-Chip Microcomputer is introduced in this paper. The composition of hardware and the major control idea about the software for the equipment are presented. Digitizing the measuring data from nuclear instruments is precondition of reactor control and protection system which would be computerizing, and it is also an application of redundancy and variety of reactor protection system in nuclear measuring instruments. At last the working state is described. (authors)

Software Prototyping

Science.gov (United States)

Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

2016-01-01

Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

Integrating semantic web and software agents : Exchanging RIF and BDI rules

NARCIS (Netherlands)

Gong, Y.; Overbeek, S.J.

2011-01-01

Software agents and rules are both used for creating flexibility. Exchanging rules between Semantic Web and agents can ensure consistency in rules and support easy updating and changing of rules. The Rule Interchange Format (RIF) is a new W3C recommendation Semantic Web standard for exchanging rules

DiPS: A Unifying Approach for developing System Software

OpenAIRE

Michiels, Sam; Matthijs, Frank; Walravens, Dirk; Verbaeten, Pierre

2002-01-01

In this paper we unify three essential features for flexible system software: a component oriented approach, self-adaptation and separation of concerns.We propose DiPS (Distrinet Protocol Stack), a component framework, which offers components, an anonymous interaction model and connectors to handle non-functional aspects such as concurrency. DiPS has effectively been used in industrial protocol stacks and device drivers.

Open Source Next Generation Visualization Software for Interplanetary Missions

Science.gov (United States)

Trimble, Jay; Rinker, George

2016-01-01

Mission control is evolving quickly, driven by the requirements of new missions, and enabled by modern computing capabilities. Distributed operations, access to data anywhere, data visualization for spacecraft analysis that spans multiple data sources, flexible reconfiguration to support multiple missions, and operator use cases, are driving the need for new capabilities. NASA's Advanced Multi-Mission Operations System (AMMOS), Ames Research Center (ARC) and the Jet Propulsion Laboratory (JPL) are collaborating to build a new generation of mission operations software for visualization, to enable mission control anywhere, on the desktop, tablet and phone. The software is built on an open source platform that is open for contributions (http://nasa.github.io/openmct).

Interactive Web-based e-learning for Studying Flexible Manipulator Systems

Directory of Open Access Journals (Sweden)

Abul K. M. Azad

2008-03-01

Full Text Available Abstract— This paper presents a web-based e-leaning facility for simulation, modeling, and control of flexible manipulator systems. The simulation and modeling part includes finite difference and finite element simulations along with neural network and genetic algorithm based modeling strategies for flexible manipulator systems. The controller part constitutes a number of open-loop and closed-loop designs. Closed loop control designs include the classical, adaptive, and neuro-model based strategies. Matlab software package and its associated toolboxes are used to implement these. The Matlab web server is used as the gateway between the facility and web-access. ASP.NET technology and SQL database are utilized to develop web applications for access control, user account and password maintenance, administrative management, and facility utilization monitoring. The reported facility provides a flexible but effective approach of web-based interactive e-learning facility of an engineering system. This can be extended to incorporate additional engineering systems within the e-learning framework.

Virtual Sensor for Kinematic Estimation of Flexible Links in Parallel Robots.

Science.gov (United States)

Bengoa, Pablo; Zubizarreta, Asier; Cabanes, Itziar; Mancisidor, Aitziber; Pinto, Charles; Mata, Sara

2017-08-23

The control of flexible link parallel manipulators is still an open area of research, endpoint trajectory tracking being one of the main challenges in this type of robot. The flexibility and deformations of the limbs make the estimation of the Tool Centre Point (TCP) position a challenging one. Authors have proposed different approaches to estimate this deformation and deduce the location of the TCP. However, most of these approaches require expensive measurement systems or the use of high computational cost integration methods. This work presents a novel approach based on a virtual sensor which can not only precisely estimate the deformation of the flexible links in control applications (less than 2% error), but also its derivatives (less than 6% error in velocity and 13% error in acceleration) according to simulation results. The validity of the proposed Virtual Sensor is tested in a Delta Robot, where the position of the TCP is estimated based on the Virtual Sensor measurements with less than a 0.03% of error in comparison with the flexible approach developed in ADAMS Multibody Software.

Building Flexible Manufacturing Systems Based on Peer-Its

Directory of Open Access Journals (Sweden)

dos Santos Rocha M

2008-01-01

Full Text Available Abstract Peer-to-peer computing principles have started to pervade into mechanical control systems, inducing a paradigm shift from centralized to autonomic control. We have developed a self-contained, miniaturized, universal and scalable peer-to-peer based hardware-software system, the peer-it platform, to serve as a stick-on computer solution to raise real-world artefacts like, for example, machines, tools, or appliances towards technology-rich, autonomous, self-induced, and context-aware peers, operating as spontaneously interacting ensembles. The peer-it platform integrates sensor, actuator, and wireless communication facilities on the hardware level, with an object-oriented, component-based coordination framework at the software level, thus providing a generic platform for sensing, computing, controlling, and communication on a large scale. The physical appearance of a peer-it supports pinning it to real-world artefacts, while at the same time integrating those artefacts into a mobile ad hoc network of peers. Peer-it networks thus represent ensembles of coordinated artefacts, exhibiting features of autonomy like self-management at the node level and self-organization at the network level. We demonstrate how the peer-it system implements the desired flexibility in automated manufacturing systems to react in the case of changes, whether intended or unexpectedly occuring. The peer-it system enables machine flexibility in that it adapts production facilities to produce new types of products, or change the order of operation executed on parts instantaneously. Secondly, it enables routing flexibility, that is, the ability to use multiple machines to spontaneously perform the same operation on one part alternatively (to implement autonomic fault tolerance or to absorb large-scale changes in volume, capacity, or capability (to implement autonomic scalability.

Model format for a vaccine stability report and software solutions.

Science.gov (United States)

Shin, Jinho; Southern, James; Schofield, Timothy

2009-11-01

A session of the International Association for Biologicals Workshop on Stability Evaluation of Vaccine, a Life Cycle Approach was devoted to a model format for a vaccine stability report, and software solutions. Presentations highlighted the utility of a model format that will conform to regulatory requirements and the ICH common technical document. However, there need be flexibility to accommodate individual company practices. Adoption of a model format is premised upon agreement regarding content between industry and regulators, and ease of use. Software requirements will include ease of use and protections against inadvertent misspecification of stability design or misinterpretation of program output.

Representações Sociais acerca do Trabalho em Equipe

Directory of Open Access Journals (Sweden)

Denise de Aragão Fernandes dos Santos

Full Text Available O trabalho em equipe é uma demanda das atuais organizações de trabalho. Este estudo identificou representações sociais acerca do trabalho em equipe em universidades no Rio de Janeiro. Uma fase inicial de evocação foi feita com 134 funcionários, que indicaram e ordenaram de três a cinco palavras a partir do termo indutor "trabalho em equipe". Na sequência, foram realizadas 14 entrevistas para aprofundamento das respostas. A abordagem de representações sociais escolhida foi a estrutural, de Jean Claude Abric e a análise foi feita com apoio do software EVOC.Os resultados indicam 393 palavras evocadas, sendo 187 distintas, cujo agrupamento por semelhança resultou em 105 palavras/expressões. Os resultados apontam como possíveis núcleos centrais as palavras "respeito", "união" e "cooperação". Os resultados foram discutidos à luz da literatura, sendo apresentadas contribuições do estudo para o avanço das pesquisas sobre equipes de trabalho.

Application of industry-standard guidelines for the validation of avionics software

Science.gov (United States)

Hayhurst, Kelly J.; Shagnea, Anita M.

1990-01-01

The application of industry standards to the development of avionics software is discussed, focusing on verification and validation activities. It is pointed out that the procedures that guide the avionics software development and testing process are under increased scrutiny. The DO-178A guidelines, Software Considerations in Airborne Systems and Equipment Certification, are used by the FAA for certifying avionics software. To investigate the effectiveness of the DO-178A guidelines for improving the quality of avionics software, guidance and control software (GCS) is being developed according to the DO-178A development method. It is noted that, due to the extent of the data collection and configuration management procedures, any phase in the life cycle of a GCS implementation can be reconstructed. Hence, a fundamental development and testing platform has been established that is suitable for investigating the adequacy of various software development processes. In particular, the overall effectiveness and efficiency of the development method recommended by the DO-178A guidelines are being closely examined.

A Perspective on Equipment Design for Fusion Remote Handling

International Nuclear Information System (INIS)

Mills, S.; Haist, B.; Hamilton, D.

2006-01-01

For 8 years, JET remote operations have become more capable and confident. Many tasks have been successfully completed, even those never intended to be remote maintenance activities. The general approach to the provision of remote handling equipment at JET has been the preferred use of commercially-off-the-shelf equipment. In the areas of electrical, electronic, software and control this approach has been generally achievable. However, in the area of mechanical equipment it has been more difficult. In particular the RH tooling has been almost entirely bespoke as its requirements are highly sensitive to the design of the JET component being handled and there are many design variations. Hence, JET has required the design and manufacture of over 700 types of bespoke RH equipment. This paper will discuss the experience of introducing and developing remote handling mechanical equipment for JET. The paper will cover the relationship between the remote handling equipment and the JET component design and the potential for improving the design function. A major lesson from the introduction of remote handling to JET has been demonstration of the very close interdependency of the design of JET components with design of remote handling tooling. The JET remote handling manual was originally introduced as the vehicle to ensure remote handling compatibility by the introduction of standards. Experience has shown that in general the remote handling manual approach has been insufficient. Future fusion machines will be much more complex than JET and will demand even greater remote handling compatibility. This paper will discuss possible methods for improving this process. Equipment operating in a high radiation environment must be dependable It may spend part of its time in areas that would be extremely difficult to recover from in the case of failure. The equipment may also have a high duty cycle to minimise shutdown times and probably cannot be manually inspected on a frequent

SSE software test management STM capability: Using STM in the Ground Systems Development Environment (GSDE)

Science.gov (United States)

Church, Victor E.; Long, D.; Hartenstein, Ray; Perez-Davila, Alfredo

1992-01-01

This report is one of a series discussing configuration management (CM) topics for Space Station ground systems software development. It provides a description of the Software Support Environment (SSE)-developed Software Test Management (STM) capability, and discusses the possible use of this capability for management of developed software during testing performed on target platforms. This is intended to supplement the formal documentation of STM provided by the SEE Project. How STM can be used to integrate contractor CM and formal CM for software before delivery to operations is described. STM provides a level of control that is flexible enough to support integration and debugging, but sufficiently rigorous to insure the integrity of the testing process.

Simulation approach towards energy flexible manufacturing systems

CERN Document Server

Beier, Jan

2017-01-01

This authored monograph provides in-depth analysis and methods for aligning electricity demand of manufacturing systems to VRE supply. The book broaches both long-term system changes and real-time manufacturing execution and control, and the author presents a concept with different options for improved energy flexibility including battery, compressed air and embodied energy storage. The reader will also find a detailed application procedure as well as an implementation into a simulation prototype software. The book concludes with two case studies. The target audience primarily comprises research experts in the field of green manufacturing systems. .

Software used with the flux mapper at the solar parabolic dish test site

Science.gov (United States)

Miyazono, C.

1984-01-01

Software for data archiving and data display was developed for use on a Digital Equipment Corporation (DEC) PDP-11/34A minicomputer for use with the JPL-designed flux mapper. The flux mapper is a two-dimensional, high radiant energy scanning device designed to measure radiant flux energies expected at the focal point of solar parabolic dish concentrators. Interfacing to the DEC equipment was accomplished by standard RS-232C serial lines. The design of the software was dicated by design constraints of the flux-mapper controller. Early attemps at data acquisition from the flux-mapper controller were not without difficulty. Time and personnel limitations result in an alternative method of data recording at the test site with subsequent analysis accomplished at a data evaluation location at some later time. Software for plotting was also written to better visualize the flux patterns. Recommendations for future alternative development are discussed. A listing of the programs used in the anaysis is included in an appendix.

Protocol independent transmission method in software defined optical network

Science.gov (United States)

Liu, Yuze; Li, Hui; Hou, Yanfang; Qiu, Yajun; Ji, Yuefeng

2016-10-01

With the development of big data and cloud computing technology, the traditional software-defined network is facing new challenges (e.i., ubiquitous accessibility, higher bandwidth, more flexible management and greater security). Using a proprietary protocol or encoding format is a way to improve information security. However, the flow, which carried by proprietary protocol or code, cannot go through the traditional IP network. In addition, ultra- high-definition video transmission service once again become a hot spot. Traditionally, in the IP network, the Serial Digital Interface (SDI) signal must be compressed. This approach offers additional advantages but also bring some disadvantages such as signal degradation and high latency. To some extent, HD-SDI can also be regard as a proprietary protocol, which need transparent transmission such as optical channel. However, traditional optical networks cannot support flexible traffics . In response to aforementioned challenges for future network, one immediate solution would be to use NFV technology to abstract the network infrastructure and provide an all-optical switching topology graph for the SDN control plane. This paper proposes a new service-based software defined optical network architecture, including an infrastructure layer, a virtualization layer, a service abstract layer and an application layer. We then dwell on the corresponding service providing method in order to implement the protocol-independent transport. Finally, we experimentally evaluate that proposed service providing method can be applied to transmit the HD-SDI signal in the software-defined optical network.

Flexible Software Solution for Information System of Maintenance and Repair in Armenian NPP Medzamor

International Nuclear Information System (INIS)

Stoilova Yordanova, V.; Manchev, B.

2016-01-01

Achieving high performance in maintenance and repair activities in nuclear facilities and good results in this area is not possible without proper planning. This includes long-term, medium-term and annual planning. A computerized information maintenance management system is a tool widely used by nuclear operators to achieve safe, reliable, stable and predictable plant operation. Development and implementation of such a system in the Armenian NPP Medzamor (ANPP) was initiated by the European Commission (EC) in August 2013 based on the decision of ANPP management to improve practice in terms of planning and carrying out maintenance and repair of plant structures, systems and components (SSCs). The main purpose for the development and deployment of information maintenance management system in ANPP is creation of a systematic approach to the distribution of tasks between the maintenance personnel as well as the timing and methods of their implementation - on which systems, structures and components, maintenance frequency, while the ultimate goal is to optimize the use of resources for maintenance and to ensure plant safe operation and reliability. In November 2013 a contract between European Commission and consortium Risk Engineering -David Holding was signed, including the following supplies: Hardware for the information system of ANPP (called us Archimed MRO); Specification, design and development of the software of Archimed MRO, installation of the system, data migration, training of ANPP staff operating the system, and 9 months trial operation. In the process of specifying the functionality of the system the main purpose was to provide modern information tools to help improve the work of ANPP personnel in the following areas: Optimization of ANPP maintenance program; Planning of maintenance, repair and overhaul (MRO) activities; Effective management of the processes of MRO; Analysis of the MRO results (trend analysis, recurrence of repairs, quality of the repairs

Flexibility.

Science.gov (United States)

Humphrey, L. Dennis

1981-01-01

Flexibility is an important aspect of all sports and recreational activities. Flexibility can be developed and maintained by stretching exercises. Exercises designed to develop flexibility in ankle joints, knees, hips, and the lower back are presented. (JN)

Communication from the Permanent Missions of Brazil and Romania to the International Atomic Energy Agency Regarding Guidelines for the Transfers of Nuclear-Related Dual-Use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2003-01-01

The Director General of the International Atomic Energy Agency has received Notes Verbale from the Permanent Missions of Brazil and Romania, dated 28 February 2003, providing information on the export policies and practices of the Governments of Brazil and Romania with respect to the export of nuclear-related dual-use equipment, materials, software and related technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Notes Verbale is attached. The attachment referenced in the Note Verbale was issued previously as INFCIRC/254/Rev.5/Part 2

Modeling of flexible reciprocating compressor considering the crosshead subsidence

Science.gov (United States)

Xue, Xiaogang; Liu, Shulin; Sun, Xin

2018-01-01

Crank-slider mechanisms are important parts of heavy duty machines, including reciprocating compressors, combustion motors. This paper targets on the dynamic response of the crosshead in a reciprocating compressor, taking into consideration the crosshead deviation from the original level. The traditional model of the compressor is usually a slider-mechanism system without considering the deflection of the crosshead, thus neglecting the influence of the piston rod, which has some flexible features. In this paper, a rigid-flexible model of slider-crank is described theoretically, using the commercial software MATLAB, where the crank, connecting rod and crosshead are treated as rigid bodies, while the piston rod connected to the crosshead is considered as a flexible body. The dynamic response of the mechanism with the crosshead subsidence is discussed detailedly in this paper. After calculated theoretically, the MATLAB simulation showed that the dynamic response of the crosshead will be greatly influenced if the crosshead subsided from the original level. Also, the influence of the crosshead subsidence was also investigated, and some extra vibration of the crosshead arises.

Flexible Frequency Discrimination Subsystems for Reconfigurable Radio Front Ends

Directory of Open Access Journals (Sweden)

Carey-Smith Bruce E

2005-01-01

Full Text Available The required flexibility of the software-defined radio front end may currently be met with better overall performance by employing tunable narrowband circuits rather than pursuing a truly wideband approach. A key component of narrowband transceivers is appropriate filtering to reduce spurious spectral content in the transmitter and limit out-of-band interference in the receiver. In this paper, recent advances in flexible, frequency-selective, circuit components applicable to reconfigurable SDR front ends are reviewed. The paper contains discussion regarding the filtering requirements in the SDR context and the use of intelligent, adaptive control to provide environment-aware frequency discrimination. Wide tuning-range frequency-selective circuit elements are surveyed including bandpass and bandstop filters and narrowband tunable antennas. The suitability of these elements to the mobile wireless SDR environment is discussed.

Examining a Paradigm Shift in Organic Depot-Level Software Maintenance for Army Communications and Electronics Equipment

Science.gov (United States)

2015-05-30

scalable application of cutting edge technologies. 20 4. Responding to changing resources—With likely significant resource reductions the depot...deal with underutilized organic capability while continuing to increase outsourcing of depot workload. In addition the study states that a...the unique organic skills that TYAD could 40 bring to the software sustainment mission could be valuable based on the specific type of software

Consumer flexibility - State and challenges

International Nuclear Information System (INIS)

Grande, Ove S.; Saele, Hanne; Morch, Andrei Z.

2002-02-01

This report summarises experiences and results from relevant projects carried out within the area of consumer flexibility in the last years. A general description of the projects is presented. In addition are testing activities, economical signals for motivating the end user for load reductions and appropriate technology for communication and effect management mentioned separately. Briefly summarised is the following achieved: 1) The potential for effect regulating measures in ordinary consumption and in power demanding industry is analysed and estimated to 1750 MW and 3360 MW respectively. 2) Time varied rates are developed and are tested. The NVE has decided on this basis that all the network owners should offer season varied rates to their customers. 3) Test projects in Drammen, Oslo and Trondheim have shown that it is possible to motivate smaller consumers for and implement load reductions. 4) Technology for load management for the end user is evaluated. 5) A survey is made viewing the technology for two way communication. In addition the ''option'' market for the reserves of the Statnett has proved that a steady compensation is a sufficient incentive for producing substantial effect reserves in the load sector (power intensive industry). In the last part of the report the incentives and frame conditions for establishing technical solutions and infrastructure are discussed. Further work will focus on the consumer flexibility in shortage situations. The main challenges are connected to: 1) Establishing a foundation for decisions concerning cost efficient investments in necessary technical equipment. 2) To find an optimal combination of a price flexible and remote controlled load reduction

Evolution of design concepts for remotely maintainable equipment racks

International Nuclear Information System (INIS)

Peishel, F.L.; Mouring, R.W.; Schrock, S.L.

1986-01-01

Equipment racks have been used to support process equipment in radioactive facilities for many years. Improvements in the design of these racks have evolved relatively slowly primarily as a result of limitations in the capabilities of maintenance equipment; that is, tasks could only be approached from above using bridge cranes with viewing primarily through periscopes. In recent years, however, technological advances have been made by the Consolidated Fuel Reprocessing Program (CFRP) at Oak Ridge National Laboratory (ORNL) in bridge-mounted servomanipulators with onboard auxiliary hoists and television viewing systems. These advances permit full cell coverage by the manipulator arms which, in turn, allow maintenance tasks to be approached horizontally as well as from above. Maintainable equipment items can be stacked vertically on a rack because total overhead access is less important and maintenance tasks that would not have been attempted in the past can now be performed. These advances permit greater flexibility in the design and cell layout of the racks and lead to concepts that could significantly increase the availability of a facility. The evolution of rack design and a description of the alternative concepts based on present maintenance systems capabilities are presented in this paper. 13 refs., 11 figs

Technical Reviews and Audits for Systems, Equipment and Computer Software. Volume 1

Science.gov (United States)

2009-09-15

acquisitions and technology developments. 2. This new-issue SMC standard comprises the text of The Aerospace Corporation report number TOR-2007( 8583 )-6414...TRA) Deskbook – DUSD(S&T) (May 2005) 17. IMP & IMS Preparation and Use Guide Version 0.9 (21 October 2005) 18. ISO /IEC STD 15939 Software...1521B, TOR-2007( 8583 )-6414_Volume 1. 110.2 Purpose A. The guidelines contained herein implement the Department of Defense Directive 4120.21

Development of a cryogenic flexible pipe for the transfer of liquefied natural gas; Mise au point d'un flexible cryogenique pour le transfert du gaz naturel liquefie

Energy Technology Data Exchange (ETDEWEB)

Rigaud, J.; Gerez, J.M.; Dieumegard, C. [Coflexip Stena Offshore, 75 - Paris (France)

2000-07-01

For historical reasons, the liquefaction of natural gas is performed with onshore equipments and LNG tanker-ships are loaded and unloaded using rigid articulated arms. When these operations are performed in harbors, the movement of the ship with respect to the pier are relatively limited. Today, several companies aim at liquefying natural gas using floating facilities. The loading of tanker-ships is performed offshore, and thus movements between the ship and the floating facility are enhanced. The use of a flexible pipe can be an interesting alternative solution to the articulated arm. This article describes the state-of-the-art of the LNG flexible technology developed by Coflexip Stena Offshore and the progress of the program of development of a cryogenic flexible: structure, fittings, safety (leaks detection), thermal calculations, optimization of the corrugated hose profile, pressure drops, fatigue tests and service life, materials development, prototype and real tests. (J.S.)

dSDiVN: a distributed Software-Defined Networking architecture for Infrastructure-less Vehicular Networks

OpenAIRE

Alioua, Ahmed; Senouci, Sidi-Mohammed; Moussaoui, Samira

2017-01-01

In the last few years, the emerging network architecture paradigm of Software-Defined Networking (SDN), has become one of the most important technology to manage large scale networks such as Vehicular Ad-hoc Networks (VANETs). Recently, several works have shown interest in the use of SDN paradigm in VANETs. SDN brings flexibility, scalability and management facility to current VANETs. However, almost all of proposed Software-Defined VANET (SDVN) architectures are infrastructure-based. This pa...

Simplifying the Development, Use and Sustainability of HPC Software

Directory of Open Access Journals (Sweden)

Jeremy Cohen

2014-07-01

Full Text Available Developing software to undertake complex, compute-intensive scientific processes requires a challenging combination of both specialist domain knowledge and software development skills to convert this knowledge into efficient code. As computational platforms become increasingly heterogeneous and newer types of platform such as Infrastructure-as-a-Service (IaaS cloud computing become more widely accepted for high-performance computing (HPC, scientists require more support from computer scientists and resource providers to develop efficient code that offers long-term sustainability and makes optimal use of the resources available to them. As part of the libhpc stage 1 and 2 projects we are developing a framework to provide a richer means of job specification and efficient execution of complex scientific software on heterogeneous infrastructure. In this updated version of our submission to the WSSSPE13 workshop at SuperComputing 2013 we set out our approach to simplifying access to HPC applications and resources for end-users through the use of flexible and interchangeable software components and associated high-level functional-style operations. We believe this approach can support sustainability of scientific software and help to widen access to it.

Design for a Remote Monitoring Equipment of Krypton-85

Institute of Scientific and Technical Information of China (English)

LUXue-sheng; LIUGuo-rong; YEFeng; JINHui-min; TANGPei-jia

2003-01-01

A prototype equipment for monitoring Krypton-85 in situ is designed and set up. A series of relevant software is also developed for remote control, data acquirement and data analysis. Weight of the system is about 300 kg, which is composed of NaI(T1) detector, digi DART, Marillin measurement container and lead shield. The whole system is placed on a homemade go-cart.

Guideline on evaluation and acceptance of commercial grade digital equipment for nuclear safety applications

International Nuclear Information System (INIS)

1996-10-01

Nuclear power plants are increasingly upgrading their instrumentation and control (I ampersand C) systems with commercial digital equipment, which allows them to continue meeting safety and reliability requirements while controlling operating costs. However, the use of commercial software-based devices for safety related applications has raised new issues that impact design, procurement, and licensing activities. This guideline describes a consistent, comprehensive approach for the evaluation and acceptance of commercial digital equipment for nuclear safety systems

Enhancements to the Sentinel Fireball Network Video Software

Science.gov (United States)

Watson, Wayne

2009-05-01

The Sentinel Fireball Network that supports meteor imaging of bright meteors (fireballs) has been in existence for over ten years. Nearly five years ago it moved from gathering meteor data with a camera and VCR video tape to a fisheye lens attached to a hardware device, the Sentinel box, which allowed meteor data to be recorded on a PC operating under real-time Linux. In 2006, that software, sentuser, was made available on Apple, Linux, and Window operating systems using the Python computer language. It provides basic video and management functionality and a small amount of analytic software capability. This paper describes the new and attractive future features of the software, and, additionally, it reviews some of the research and networks from the past and present using video equipment to collect and analyze fireball data that have applicability to sentuser.

Project installation the large equipment in line system in Brazil. Gas export line valve P-40 FPSO-MLS. Field Marlim Sul, Campos Basin, Brazil; Operacao de instalacao do maior equipamento no sistema in line ja realizado no Brasil. Valvula do gasoduto P-40 X FPSO-MLS. Campo de Marlim Sul, Bacia de Campos, Brasil

Energy Technology Data Exchange (ETDEWEB)

Marques, Marcos Antonio Rodrigues; Fernandes, Paulo Tavares [PETROBRAS, Campos dos Goytacases, RJ (Brazil). Exploracao e Producao

2005-07-01

This work will approach the current level of development of the installation of connected underwater equipment to flexible lines in the underwater engineering operations in Campos' Basin. The project will show studies, analysis and simulations (through software developed by PETROBRAS) about the installation of the largest equipment laid in the 'in-line' system (connected to flexible lines) in Brazil - and one of the largest of the world: the ESDV (Emergency Shut Down Valve) of the gas pipeline P-40 x FPSO-MLS, in the South Marlim field, in Campos' Basin. This ESDV, of about 18.000 kg, 4 m height and 6,5 m length, has the purpose of assuring the safety conditions on the facilities, interrupting the gas flow exported for P-40 in case of emergency situations. Its installation opened a new alternative in releasing underwater equipment, using the ships that install the flexible lines. This operation occurred in June, 2004, and required the use of a second vessel for support and monitoring of the ESDV laying. The ESDV was installed at 400 m from FPSO-MLS, in a water depth of 1.137 m. This method shall be used broadly by the company in the implantation of the new units of Campos' Basin, and the upcoming studies must consider the gradual increase of the water depth in the new projects. This work will focus the technological development in this area, and one of its purposes is to foresee the future difficulties that can appear in the implantation of the production systems in deep and ultra-deep waters. (author)

Software Tools: A One-Semester Secondary School Computer Course.

Science.gov (United States)

Bromley, John; Lakatos, John

1985-01-01

Provides a course outline, describes equipment and teacher requirements, discusses student evaluation and course outcomes, and details the computer programs used in a high school course. The course is designed to teach students use of the microcomputer as a tool through hands-on experience with a variety of commercial software programs. (MBR)

Structural evaluation of W-211 flexible receiver platforms and tank pit walls

International Nuclear Information System (INIS)

Shrivastava, H.P.

1997-01-01

This document is a structural analysis of the Flexible Receiver Platforms and the tank-pit wall during removal of equipment and during a accidental drop of that equipment. The platform and the pit walls must withstand a accidental drop of a mixer and transfer pumps in specific pits in tanks 102-AP and 104-AP. A mixer pump will be removed from riser 11 in pit 2A on tank 241-AP-102. A transfer pump will be removed from riser 13 in pit 2D on tank 241-AP-102 and another transfer pump will be removed from riser 3A in pit 4A on tank 241-AP-104

Aprimorando a Gerência e o Desenvolvimento de Software com Metodologias Ágeis

Directory of Open Access Journals (Sweden)

Mauricio Andreazza Sganderla

2016-07-01

Full Text Available Este artigo aborda a melhoria da gerência e construção de software utilizando as metodologias ágeis eXtreme Programming e Scrum. São aplicadas as melhores práticas de ambas as metodologias em uma equipe de desenvolvimento de software, em um ambiente em que não havia nenhum processo bem definido de desenvolvimento de software. A escolha pelo uso das metodologias ágeis foi definida, pois atende ao dinamismo do cenário atual, requisitos voláteis, ambiente mais colaborativo e menos burocrático, tendo como objetivo principal o software em funcionamento e que realmente traga retorno ao cliente.

47 CFR 64.702 - Furnishing of enhanced services and customer-premises equipment.

Science.gov (United States)

2010-10-01

...'s length basis. (4) Any research or development performed on a joint or separate basis for the subsidiary must be done on a compensatory basis. Except for generic software within equipment, manufactured... facilities used in interstate communications, which employ computer processing applications that act on the...

A Flexible Method for Producing F.E.M. Analysis of Bone Using Open-Source Software

Science.gov (United States)

Boppana, Abhishektha; Sefcik, Ryan; Meyers, Jerry G.; Lewandowski, Beth E.

2016-01-01

This project, performed in support of the NASA GRC Space Academy summer program, sought to develop an open-source workflow methodology that segmented medical image data, created a 3D model from the segmented data, and prepared the model for finite-element analysis. In an initial step, a technological survey evaluated the performance of various existing open-source software that claim to perform these tasks. However, the survey concluded that no single software exhibited the wide array of functionality required for the potential NASA application in the area of bone, muscle and bio fluidic studies. As a result, development of a series of Python scripts provided the bridging mechanism to address the shortcomings of the available open source tools. The implementation of the VTK library provided the most quick and effective means of segmenting regions of interest from the medical images; it allowed for the export of a 3D model by using the marching cubes algorithm to build a surface mesh. To facilitate the development of the model domain from this extracted information required a surface mesh to be processed in the open-source software packages Blender and Gmsh. The Preview program of the FEBio suite proved to be sufficient for volume filling the model with an unstructured mesh and preparing boundaries specifications for finite element analysis. To fully allow FEM modeling, an in house developed Python script allowed assignment of material properties on an element by element basis by performing a weighted interpolation of voxel intensity of the parent medical image correlated to published information of image intensity to material properties, such as ash density. A graphical user interface combined the Python scripts and other software into a user friendly interface. The work using Python scripts provides a potential alternative to expensive commercial software and inadequate, limited open-source freeware programs for the creation of 3D computational models. More work

E language based on MCNP modeling software for autonomous

International Nuclear Information System (INIS)

Li Fei; Ge Liangquan; Zhang Qingxian

2010-01-01

MCNP (Monte Carlo N-Particle Code) is based on the Monte Carlo method for computing neutron, photon and other particles as the object of the movement simulation computer program. Because of its powerful computing simulation, flexible and universal features in many fields has been widely used, but due to a software professional in the operating area has been greatly restricted, so that in later development has been greatly hindered. E-language was used in order to develop the autonomy of MCNP modeling software, used to address users not familiar with MCNP and can not create object model, get rid of dull red tape 'notebook' type of program type and built a new MCNP modeling system. (authors)

A roadmap to continuous integration for ATLAS software development

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00132984; The ATLAS collaboration; Elmsheuser, Johannes; Obreshkov, Emil; Krasznahorkay, Attila

2017-01-01

The ATLAS software infrastructure facilitates efforts of more than 1000 developers working on the code base of 2200 packages with 4 million C++ and 1.4 million python lines. The ATLAS offline code management system is the powerful, flexible framework for processing new package versions requests, probing code changes in the Nightly Build System, migration to new platforms and compilers, deployment of production releases for worldwide access and supporting physicists with tools and interfaces for efficient software use. It maintains multi-stream, parallel development environment with about 70 multi-platform branches of nightly releases and provides vast opportunities for testing new packages, for verifying patches to existing software and for migrating to new platforms and compilers. The system evolution is currently aimed on the adoption of modern continuous integration (CI) practices focused on building nightly releases early and often, with rigorous unit and integration testing. This paper describes the CI ...

A Roadmap to Continuous Integration for ATLAS Software Development

CERN Document Server

Elmsheuser, Johannes; The ATLAS collaboration; Obreshkov, Emil; Undrus, Alexander

2016-01-01

The ATLAS software infrastructure facilitates efforts of more than 1000 developers working on the code base of 2200 packages with 4 million C++ and 1.4 million python lines. The ATLAS offline code management system is the powerful, flexible framework for processing new package versions requests, probing code changes in the Nightly Build System, migration to new platforms and compilers, deployment of production releases for worldwide access and supporting physicists with tools and interfaces for efficient software use. It maintains multi-stream, parallel development environment with about 70 multi-platform branches of nightly releases and provides vast opportunities for testing new packages, for verifying patches to existing software and for migrating to new platforms and compilers. The system evolution is currently aimed on the adoption of modern continuous integration (CI) practices focused on building nightly releases early and often, with rigorous unit and integration testing. This presentation describes t...

Extension of operational systems in computers of common use for application in systems for experimental equipment control

International Nuclear Information System (INIS)

Demidov, M.A.; Makarov, V.V.; Solov'ev, G.N.

1985-01-01

The problems of constructing specialized software for large complexes of experimental equipment and its functioning with serial operating systems (OS) are discussed. The main concepts being the base of dispatching software construction (an applied program package) extending the ES OS potentialities being used in the IHEP system for automatic data acquisition and accelerator control are considered

The Challenges of the "Software Support for Industrial Controls" Contract

CERN Document Server

Ninin, P

2000-01-01

ST division is currently specifying a 'Software Support for Industrial Controls' contract. The application of this contract and its success will require several changes in our habits for specifying, designing, and maintaining control systems. This paper summarizes some key concepts which should be respected in order to obtain maximum benefits from the future contract and to optimize the software activities in the division. The contract concerns the maintenance and development of the monitoring and control systems used for supervising CERN's technical infrastructure (electrical distribution, cooling water, air conditioning, safety, and access control). The systems concerned consist of computer and communication hardware and software, tailored to provide specific functionalities for the remote operation, command, and monitoring of equipment. All these systems use commercially available software and hardware such as SCADA, PLCs and associated drivers, controllers, fieldbuses, and networks. It is intended to cont...

SignalPlant: an open signal processing software platform

Czech Academy of Sciences Publication Activity Database

Plešinger, Filip; Jurčo, Juraj; Halámek, Josef; Jurák, Pavel

2016-01-01

Roč. 37, č. 7 (2016), N38-N48 ISSN 0967-3334 R&D Projects: GA ČR GAP103/11/0933; GA MŠk(CZ) LO1212; GA ČR GAP102/12/2034 Institutional support: RVO:68081731 Keywords : data visualization * software * signal processing * ECG * EEG Subject RIV: FS - Medical Facilities ; Equipment Impact factor: 2.058, year: 2016

Software for Adapting Dspz Receivers to the Uran Interferometer Network

Science.gov (United States)

Isaeva, E. A.; Lytvynenko, O. A.; Shepelev, V. A.

More than 10 years ago, URAN interferometer network (Megn A.V.,1997; Konovalenko A.A., 2014) had been equipped with newly designed receivers with a pass band extended up to 250 kHz and software rejection of interferences (Rashkovskii, 2012). The broadening of bandwidth of received signal increase the sensitivity of the receivers significantly and let us to investigate the angular structure about one hundred radio sources. A software package had been developed that allows: preparing a program of observations, carrying out observations automatically, making data cross-correlation, calculating visibility functions for all pairs of antennae, and fitting models of an angular structure of the sources. Data storage formats were elaborated for each stage of recording or processing. At present, new digital radio astronomy receiver DSPZ have been developed by IRA NASU (Zakharenko, 2016). The receiver allows recording an entire bandwidth of signals of a decameter range from 8 to 32 MHz. It is used at UTR-2 and URAN radio telescopes operated in a single dish mode. Application of the receivers for interferometer observation with the URAN network provides additional advantages in accuracy and sensitivity of studies. In this report we consider the data formats and synchronization methods used in URAN equipment and DSPZ receivers, and discuss algorithms of their transformation. Newly elaborated software is described, that allows selecting a set of frequency bands of signals recorded with DSPZ and converting them to the form used by the URAN software. This approach allows us to carry out the interferometer observations in an the extended frequency range provided by DSPZ and to use as much as possible the software package developed for the URAN network for data reduction.

48 CFR 252.211-7007 - Reporting of Government-Furnished Equipment in the DoD Item Unique Identification (IUID) Registry.

Science.gov (United States)

2010-10-01

... property, equipment, machine tools, or similar capital items. Unique item identifier (UII) means a set of... management of Government-furnished equipment shall be performed at the item level; and (2) Unless provided by... payments; (6) Intellectual property or software; or (7) Real property. (d) Procedures for establishing UIIs...

Selection of bioprocess simulation software for industrial applications.

Science.gov (United States)

Shanklin, T; Roper, K; Yegneswaran, P K; Marten, M R

2001-02-20

Two commercially available, process-simulation software packages (Aspen Batch Plus v1.2, Aspen Technology, Inc., Cambridge, Massachusetts, and Intelligen SuperPro v3.0, INTELLIGEN, INC., Scotch Plains, Ner Jersey) are evaluated for use in modeling industrial, biotechnology processes. Software is quantitatively evaluated by Kepner-Tregoe Decision Analysis (Kepner and Tregoe, 1981). This evaluation shows that Aspen Batch Plus v1.2 (ABP) and Intelligen SuperPro v3.0 (ISP) can successfully perform specific simulation tasks but do not provide a complete model of all phenomena occurring within a biotechnology process. Software is best suited to provide a format for process management, using material and energy balances to answer scheduling questions, explore equipment change-outs, and calculate cost data. The ability of simulation software to accurately predict unit operation scale-up and optimize bioprocesses is limited. To realistically evaluate the software, a vaccine manufacturing process under development at Merck & Company is simulated. Case studies from the vaccine process are presented as examples of how ABP and ISP can be used to shed light on real-world processing issues. Copyright 2001 John Wiley & Sons, Inc.

Distributed flow sensing for closed-loop speed control of a flexible fish robot.

Science.gov (United States)

Zhang, Feitian; Lagor, Francis D; Yeo, Derrick; Washington, Patrick; Paley, Derek A

2015-10-23

Flexibility plays an important role in fish behavior by enabling high maneuverability for predator avoidance and swimming in turbulent flow. This paper presents a novel flexible fish robot equipped with distributed pressure sensors for flow sensing. The body of the robot is molded from soft, hyperelastic material, which provides flexibility. Its Joukowski-foil shape is conducive to modeling the fluid analytically. A quasi-steady potential-flow model is adopted for real-time flow estimation, whereas a discrete-time vortex-shedding flow model is used for higher-fidelity simulation. The dynamics for the flexible fish robot yield a reduced model for one-dimensional swimming. A recursive Bayesian filter assimilates pressure measurements to estimate flow speed, angle of attack, and foil camber. The closed-loop speed-control strategy combines an inverse-mapping feedforward controller based on an average model derived for periodic actuation of angle-of-attack and a proportional-integral feedback controller utilizing the estimated flow information. Simulation and experimental results are presented to show the effectiveness of the estimation and control strategy. The paper provides a systematic approach to distributed flow sensing for closed-loop speed control of a flexible fish robot by regulating the flapping amplitude.

Soft control of scanning probe microscope with high flexibility.

Science.gov (United States)

Liu, Zhenghui; Guo, Yuzheng; Zhang, Zhaohui; Zhu, Xing

2007-01-01

Most commercial scanning probe microscopes have multiple embedded digital microprocessors and utilize complex software for system control, which is not easily obtained or modified by researchers wishing to perform novel and special applications. In this paper, we present a simple and flexible control solution that just depends on software running on a single-processor personal computer with real-time Linux operating system to carry out all the control tasks including negative feedback, tip moving, data processing and user interface. In this way, we fully exploit the potential of a personal computer in calculating and programming, enabling us to manipulate the scanning probe as required without any special digital control circuits and related technical know-how. This solution has been successfully applied to a homemade ultrahigh vacuum scanning tunneling microscope and a multiprobe scanning tunneling microscope.

Test plan for qualification testing of the 241-SY-101 Flexible Receiver System

International Nuclear Information System (INIS)

Ritter, G.A.

1994-01-01

A mixer pump was installed in tank 241-SY-101 on July 3, 1993, to support hydrogen mitigation testing. This test mixer pump has proven to be very successful in mitigating the large gas releases, or ''burps,'' from the tank waste. Therefore, a decision has been made to fabricate a spare pump that will be installed upon failure of the existing test pump. Before replacement activities can be initiated, equipment must be available to remove the existing pump. A pump removal system is currently being designed and fabricated that will support the retrieval, transportation and disposal of the existing pump. The Equipment Removal System consists of six major components: the flexible receiver system (FRS), the equipment storage container, the container strongback system, the container transport trailer, the support cranes, and the pump washdown system

Free software and free culture in Higher Education: pipelines and workflows for creative purposes

OpenAIRE

Gonçalves, Nelson; Figueiredo, Maria Pacheco

2015-01-01

OpenLab ESEV is a project of the School of Education of the Polytechnic Institute of Viseu (ESEV), Portugal, that aims to promote, foster and support the use of Free/Libre Software and Open Source Software, Open Educational Resources, Free Culture, Free file formats and more flexible copyright licenses for creative and educational purposes in the ESEV's domains of activity (education, arts, media). Most of the OpenLab ESEV activities are related to the teacher education and arts a...

Supervision software for string 2 magnet test facility of large hadron collider project

International Nuclear Information System (INIS)

Mayya, Y.S.; Sanadhya, Vivek; Lal, Pradeep; Goel, Vijay; Mukhopadhyay, S.; Saha, Shilpi

2001-01-01

The Supervisory Control and Data Acquisition (SCADA) software for the String 2 test facility at CERN, Geneva is developed by BARC under the framework of CERN-DAE collaboration for LHC. The supervision application is developed using PCVue32 SCADA/MMI software. The String 2 test facility prototypes one full cell of LHC and is aimed at studying and validating the individual and collective behaviour of the superconducting magnets, before installing in the tunnel. The software integrates monitoring and supervisory control of all the main subsystems of String 2 such as Cryogenics, Vacuum, Power converters, Magnet protection, Energy extraction and interlock systems. It incorporates animated process synoptics, loop and equipment control panels, configurable trend windows for real-time and historical trending of process parameters, user settability for interlock and alarm thresholds, logging of process events, equipment faults and operator activity. The plant equipment are controlled by a variety of field located Programmable Logic Controllers and VME crates which communicate process IO to the central IO server using both vendor specific and custom protocols. The system leverages OPC (OLE for Process Controls) technology for realising a generic IO server. A large number of geographically distributed client stations are arranged to provide the process specific operator interface and these are connected to the Main IO server over CERN wide intranet and internet. (author)

Software Analysis of New Space Gravity Data for Geophysics and Climate Research

Science.gov (United States)

Deese, Rupert; Ivins, Erik R.; Fielding, Eric J.

2012-01-01

Both the Gravity Recovery and Climate Experiment (GRACE) and Gravity field and steady-state Ocean Circulation Explorer (GOCE) satellites are returning rich data for the study of the solid earth, the oceans, and the climate. Current software analysis tools do not provide researchers with the ease and flexibility required to make full use of this data. We evaluate the capabilities and shortcomings of existing software tools including Mathematica, the GOCE User Toolbox, the ICGEM's (International Center for Global Earth Models) web server, and Tesseroids. Using existing tools as necessary, we design and implement software with the capability to produce gridded data and publication quality renderings from raw gravity data. The straight forward software interface marks an improvement over previously existing tools and makes new space gravity data more useful to researchers. Using the software we calculate Bouguer anomalies of the gravity tensor's vertical component in the Gulf of Mexico, Antarctica, and the 2010 Maule earthquake region. These maps identify promising areas of future research.

Quantifying demand flexibility of power-to-heat and thermal energy storage in the control of building heating systems

DEFF Research Database (Denmark)

Finck, Christian; Li, Rongling; Kramer, Rick

2018-01-01

restricted by power-to-heat conversion such as heat pumps and thermal energy storage possibilities of a building. To quantify building demand flexibility, it is essential to capture the dynamic response of the building energy system with thermal energy storage. To identify the maximum flexibility a building......’s energy system can provide, optimal control is required. In this paper, optimal control serves to determine in detail demand flexibility of an office building equipped with heat pump, electric heater, and thermal energy storage tanks. The demand flexibility is quantified using different performance...... of TES and power-to-heat in any case of charging, discharging or idle mode. A simulation case study is performed showing that a water tank, a phase change material tank, and a thermochemical material tank integrated with building heating system can be designed to provide flexibility with optimal control....