WorldWideScience

Sample records for rss based system

  1. Zone-based RSS Reporting for Location Fingerprinting

    DEFF Research Database (Denmark)

    Kjærgaard, Mikkel Baun; Treu, Georg; Linnhoff–Popien, Claudia

    2007-01-01

    In typical location fingerprinting systems a tracked terminal reports sampled Received Signal Strength (RSS) values to a location server, which estimates its position based on a database of pre-recorded RSS fingerprints. So far, poll-based and periodic RSS reporting has been proposed. However......, for supporting proactive Location-based Services (LBSs), triggered by pre-defined spatial events, the periodic protocol is inefficient. Hence, this paper introduces zone-based RSS reporting: the location server translates geographical zones defined by the LBS into RSS-based representations, which are dynamically...

  2. LANSCE radiation security system (RSS)

    International Nuclear Information System (INIS)

    Gallegos, F.R.

    1996-01-01

    The Radiation Security System (RSS) is an engineered safety system which automatically terminates transmission of accelerated ion beams in response to pre-defined abnormal conditions. It is one of the four major mechanisms used to protect people from radiation hazards induced by accelerated pulsed ion beams at the Los Alamos Neutron Science Center (LANSCE). The others are shielding, administrative policies and procedures, and qualified, trained personnel. Prompt radiation hazards at the half-mile long LANSCE accelerator exist due to average beam intensities ranging from 1 milli-amp for H + beam to 100 micro-amps for the high intensity H - beam. Experimental programs are supplied with variable energy (maximum 800 MeV), pulse-width (maximum 1 msec), and pulse frequency (maximum 120 Hz) ion beams. The RSS includes personnel access control systems, beam spill monitoring systems, and beam current level limiting systems. It is a stand-alone system with redundant logic chains. A fault of the RSS will cause the insertion of fusible beam plugs in the accelerator low energy beam transport. The design philosophy, description, and operation of the RSS are described in this paper

  3. CERN alerter-RSS based system for information broadcast to all CERN offices

    International Nuclear Information System (INIS)

    Otto, R

    2008-01-01

    Nearly every large organization uses a tool to broadcast messages and information across the internal campus (messages like alerts announcing interruption in services or just information about upcoming events). These tools typically allow administrators (operators) to send 'targeted' messages which are sent only to specific groups of users or computers, e/g only those located in a specified building or connected to a particular computing service. CERN has a long history of such tools: CERNVMS's SPM q uotMESSAGE command, Zephyr [2] and the most recent the NICE Alerter based on the NNTP protocol. The NICE Alerter used on all Windows-based computers had to be phased out as a consequence of phasing out NNTP at CERN. The new solution to broadcast information messages on the CERN campus continues to provide the service based on cross-platform technologies, hence minimizing custom developments and relying on commercial software as much as possible. The new system, called CERN Alerter, is based on RSS (Really Simple Syndication) [9] for the transport protocol and uses Microsoft SharePoint as the backend for database and posting interface. The windows-based client relies on Internet Explorer 7.0 with custom code to trigger the window pop-ups and the notifications for new events. Linux and Mac OS X clients could also rely on any RSS readers to subscribe to targeted notifications. The paper covers the architecture and implementation aspects of the new system

  4. Theoretical Bound of CRLB for Energy Efficient Technique of RSS-Based Factor Graph Geolocation

    Science.gov (United States)

    Kahar Aziz, Muhammad Reza; Heriansyah; Saputra, EfaMaydhona; Musa, Ardiansyah

    2018-03-01

    To support the increase of wireless geolocation development as the key of the technology in the future, this paper proposes theoretical bound derivation, i.e., Cramer Rao lower bound (CRLB) for energy efficient of received signal strength (RSS)-based factor graph wireless geolocation technique. The theoretical bound derivation is crucially important to evaluate whether the energy efficient technique of RSS-based factor graph wireless geolocation is effective as well as to open the opportunity to further innovation of the technique. The CRLB is derived in this paper by using the Fisher information matrix (FIM) of the main formula of the RSS-based factor graph geolocation technique, which is lied on the Jacobian matrix. The simulation result shows that the derived CRLB has the highest accuracy as a bound shown by its lowest root mean squared error (RMSE) curve compared to the RMSE curve of the RSS-based factor graph geolocation technique. Hence, the derived CRLB becomes the lower bound for the efficient technique of RSS-based factor graph wireless geolocation.

  5. RSS-based localization of isotropically decaying source with unknown power and pathloss factor

    International Nuclear Information System (INIS)

    Sun, Shunyuan; Sun, Li; Ding, Zhiguo

    2016-01-01

    This paper addresses the localization of an isotropically decaying source based on the received signal strength (RSS) measurements that are collected from nearby active sensors that are position-known and wirelessly connected, and it propose a novel iterative algorithm for RSS-based source localization in order to improve the location accuracy and realize real-time location and automatic monitoring for hospital patients and medical equipment in the smart hospital. In particular, we consider the general case where the source power and pathloss factor are both unknown. For such a source localization problem, we propose an iterative algorithm, in which the unknown source position and two other unknown parameters (i.e. the source power and pathloss factor) are estimated in an alternating way based on each other, with our proposed sub-optimum initial estimate on source position obtained based on the RSS measurements that are collected from a few (closest) active sensors with largest RSS values. Analysis and simulation study show that our proposed iterative algorithm guarantees globally convergence to the least-squares (LS) solution, where for our suitably assumed independent and identically distributed (i.i.d.) zero-mean Gaussian RSS measurement errors the converged localization performance achieves the optimum that corresponds to the Cramer–Rao lower bound (CRLB).

  6. Using GeoRSS feeds to distribute house renting and selling information based on Google map

    Science.gov (United States)

    Nong, Yu; Wang, Kun; Miao, Lei; Chen, Fei

    2007-06-01

    Geographically Encoded Objects RSS (GeoRSS) is a way to encode location in RSS feeds. RSS is a widely supported format for syndication of news and weblogs, and is extendable to publish any sort of itemized data. When Weblogs explode since RSS became new portals, Geo-tagged feed is necessary to show the location that story tells. Geographically Encoded Objects adopts the core of RSS framework, making itself the map annotations specified in the RSS XML format. The case studied illuminates that GeoRSS could be maximally concise in representation and conception, so it's simple to manipulate generation and then mashup GeoRSS feeds with Google Map through API to show the real estate information with other attribute in the information window. After subscribe to feeds of concerned subjects, users could easily check for new bulletin showing on map through syndication. The primary design goal of GeoRSS is to make spatial data creation as easy as regular Web content development. However, it does more for successfully bridging the gap between traditional GIS professionals and amateurs, Web map hackers, and numerous services that enable location-based content for its simplicity and effectiveness.

  7. The Remote Security Station (RSS) final report

    International Nuclear Information System (INIS)

    Pletta, J.B.; Amai, W.A.; Klarer, P.; Frank, D.; Carlson, J.; Byrne, R.

    1992-10-01

    The Remote Security Station (RSS) was developed by Sandia National Laboratories for the Defense Nuclear Agency to investigate issues pertaining to robotics and sensor fusion in physical security systems. This final report documents the status of the RSS program at its completion in April 1992. The RSS system consists of the Man Portable Security Station (MaPSS) and the Telemanaged Mobile Security Station (TMSS), which are integrated by the Operator's Control Unit (OCU) into a flexible exterior perimeter security system. The RSS system uses optical, infrared, microwave, and acoustic intrusion detection sensors in conjunction with sensor fusion techniques to increase the probability of detection and to decrease the nuisance alarm rate of the system. Major improvements to the system developed during the final year are an autonomous patrol capability, which allows TMSS to execute security patrols with limited operator interaction, and a neural network approach to sensor fusion, which significantly improves the system's ability to filter out nuisance alarms due to adverse weather conditions

  8. An RSS based location estimation technique for cognitive relay networks

    KAUST Repository

    Qaraqe, Khalid A.; Hussain, Syed Imtiaz; Ç elebi, Hasari Burak; Abdallah, Mohamed M.; Alouini, Mohamed-Slim

    2010-01-01

    In this paper, a received signal strength (RSS) based location estimation method is proposed for a cooperative wireless relay network where the relay is a cognitive radio. We propose a method for the considered cognitive relay network to determine

  9. Radiation safety system (RSS) backbones: Design, engineering, fabrication and installation

    International Nuclear Information System (INIS)

    Wilmarth, J.E.; Sturrock, J.C.; Gallegos, F.R.

    1998-01-01

    The Radiation Safety System (RSS) Backbones are part of an electrical/electronic/mechanical system insuring safe access and exclusion of personnel to areas at the Los Alamos Neutron Science Center (LANSCE) accelerator. The RSS Backbones control the safety fusible beam plugs which terminate transmission of accelerated ion beams in response to predefined conditions. Any beam or access fault of the backbone inputs will cause insertion of the beam plugs in the low energy beam transport. The Backbones serve the function of tying the beam plugs to the access control systems, beam spill monitoring systems and current-level limiting systems. In some ways the Backbones may be thought of as a spinal column with beam plugs at the head and nerve centers along the spinal column. The two Linac Backbone segments and experimental area segments form a continuous cable plant over 3,500 feet from beam plugs to the tip on the longest tail. The Backbones were installed in compliance with current safety standards, such as installation of the two segments in separate conduits or tray. Monitoring for ground-faults and input wiring verification was an added enhancement to the system. The system has the capability to be tested remotely

  10. Benefits and Impact of Joint Metric of AOA/RSS/TOF on Indoor Localization Error

    Directory of Open Access Journals (Sweden)

    Qing Jiang

    2016-10-01

    Full Text Available The emerging techniques in the Fifth Generation (5G communication system, like the millimeter-Wave (mmWave and massive Multiple Input Multiple Output (MIMO, make it possible to measure the Angle-Of-arrival (AOA, Receive Signal Strength (RSS and Time-Of-flight (TOF by using various types of mobile devices. At the same time, there is always significant interest in the high-precision localization techniques based on the joint metric of AOA/RSS/TOF, which enable one to overcome the drawback of the single metric-based localization. Motivated by this concern, we rely on the Cramer–Rao Lower Bound (CRLB to analyze the localization errors of RSS/AOA, RSS/TOF, AOA/TOF and the Joint Metric of AOA/RSS/TOF (JMART-based localization. The error bounds derived in this paper can be selected as the benchmarking results to evaluate the indoor localization performance. Finally, extensive simulations are conducted to support our claim.

  11. Cleaning and Processing RSS measurements for Location Fingerprinting

    DEFF Research Database (Denmark)

    Kjærgaard, Mikkel Baun

    2007-01-01

    Handling variations in sampled Received Signal Strength (RSS) is neassary for achieving robust location fingerprinting (LF). Current research has only proposed limited system-specific models for how to handle the cleaning of RSS variations. However, this paper propose a novel model for both...

  12. How to Build an RSS 20 Feed

    CERN Document Server

    Woodman, Mark

    2006-01-01

    The little orange feed icons are everywhere on the web. From search engines to shopping sites to blogs, Really Simple Syndication (RSS 2.0) has become one of the hottest web technologies going. RSS 2.0 is a powerful - yet surprisingly easy - way to distributing timely content to a web-based audience. This Short Cut will give you the hands-on knowledge you need to build an RSS 2.0 feed. Along the way you'll learn not only the mechanics of building a feed, but industry-accepted best practices for creating feeds that perform well in various situations. Are you ready? Roll up your sleeves, c

  13. RSS (http://www.iaees.org/publications/journals/nb/rss.xml

    Directory of Open Access Journals (Sweden)

    Network Biology (ISSN 2220-8879

    Full Text Available Network Biology ISSN 2220-8879 URL: http://www.iaees.org/publications/journals/nb/online-version.asp RSS: http://www.iaees.org/publications/journals/nb/rss.xml E-mail: networkbiology@iaees.org Editor-in-Chief: WenJun Zhang Aims and Scope NETWORK BIOLOGY (ISSN 2220-8879; CODEN NBEICS is an open access, peer-reviewed international journal that considers scientific articles in all different areas of network biology. It is the transactions of the International Society of Network Biology. It dedicates to the latest advances in network biology. The goal of this journal is to keep a record of the state-of-the-art research and promote the research work in these fast moving areas. The topics to be covered by Network Biology include, but are not limited to: •Theories, algorithms and programs of network analysis •Innovations and applications of biological networks •Ecological networks, food webs and natural equilibrium •Co-evolution, co-extinction, biodiversity conservation •Metabolic networks, protein-protein interaction networks, biochemical reaction networks, gene networks, transcriptional regulatory networks, cell cycle networks, phylogenetic networks, network motifs •Physiological networks •Network regulation of metabolic processes, human diseases and ecological systems •Social networks, epidemiological networks •System complexity, self-organized systems, emergence of biological systems, agent-based modeling, individual-based modeling, neural network modeling, and other network-based modeling, etc. We are also interested in short communications that clearly address a specific issue or completely present a new ecological network, food web, or metabolic or gene network, etc. Authors can submit their works to the email box of this journal, networkbiology@iaees.org. All manuscripts submitted to this journal must be previously unpublished and may not be considered for publication elsewhere at any time during review period of this journal

  14. The remote security station (RSS)

    International Nuclear Information System (INIS)

    Pletta, J.B.

    1991-01-01

    This paper reports that, as an outgrowth of research into physical security systems, Sandia is investigating robotic technologies for improving physical security performance and flexibility. Robotic systems have the potential to allow more effective utilization of security personnel, especially in scenarios where they might be exposed to harm. They also can supplement fixed site installations where sensors have failed or where transient assets are present. The Remote Security Station (RSS) program for the defense Nuclear Agency is developing a proof-of-principle robotic system which will be used to evaluate the role, and associated cost, of robotic technologies in exterior physical security systems. The RSS consists of three primary elements: a fixed but quickly moveable tripod with intrusion detection sensors and assessment camera; a mobile robotic platform with a functionally identical security module; and a control console which allows an operator to perform security functions and teleoperate the mobile platform

  15. RSS based CERN Alerter. Information broadcast to all CERN offices.

    CERN Multimedia

    Otto, R

    2007-01-01

    Nearly every large organization uses a tool to broadcast messages and information across the internal campus (messages like alerts announcing interruption in services or just information about upcoming events). These tools typically allow administrators (operators) to send "targeted" messages which are sent only to specific groups of users or computers, e/g only those located in a specified building or connected to a particular computing service. CERN has a long history of such tools: CERNVMS€™s SPM_quotMESSAGE command, Zephyr and the most recent the NICE Alerter based on the NNTP protocol. The NICE Alerter used on all Windows-based computers had to be phased out as a consequence of phasing out NNTP at CERN. The new solution to broadcast information messages on the CERN campus continues to provide the service based on cross-platform technologies, hence minimizing custom developments and relying on commercial software as much as possible. The new system, called CERN Alerter, is based on RSS (Really Simpl...

  16. RssAB signaling coordinates early development of surface multicellularity in Serratia marcescens.

    Directory of Open Access Journals (Sweden)

    Yu-Huan Tsai

    Full Text Available Bacteria can coordinate several multicellular behaviors in response to environmental changes. Among these, swarming and biofilm formation have attracted significant attention for their correlation with bacterial pathogenicity. However, little is known about when and where the signaling occurs to trigger either swarming or biofilm formation. We have previously identified an RssAB two-component system involved in the regulation of swarming motility and biofilm formation in Serratia marcescens. Here we monitored the RssAB signaling status within single cells by tracing the location of the translational fusion protein EGFP-RssB following development of swarming or biofilm formation. RssAB signaling is specifically activated before surface migration in swarming development and during the early stage of biofilm formation. The activation results in the release of RssB from its cognate inner membrane sensor kinase, RssA, to the cytoplasm where the downstream gene promoters are located. Such dynamic localization of RssB requires phosphorylation of this regulator. By revealing the temporal activation of RssAB signaling following development of surface multicellular behavior, our findings contribute to an improved understanding of how bacteria coordinate their lifestyle on a surface.

  17. A Multi-Sensor RSS Spatial Sensing-Based Robust Stochastic Optimization Algorithm for Enhanced Wireless Tethering

    CERN Document Server

    Parasuraman, Ramviyas; Molinari, Luca; Kershaw, Keith; Di Castro, Mario; Masi, Alessandro; Ferre, Manuel

    2014-01-01

    The reliability of wireless communication in a network of mobile wireless robot nodes depends on the received radio signal strength (RSS). When the robot nodes are deployed in hostile environments with ionizing radiations (such as in some scientific facilities), there is a possibility that some electronic components may fail randomly (due to radiation effects), which causes problems in wireless connectivity. The objective of this paper is to maximize robot mission capabilities by maximizing the wireless network capacity and to reduce the risk of communication failure. Thus, in this paper, we consider a multi-node wireless tethering structure called the “server-relay-client” framework that uses (multiple) relay nodes in between a server and a client node. We propose a robust stochastic optimization (RSO) algorithm using a multi-sensor-based RSS sampling method at the relay nodes to efficiently improve and balance the RSS between the source and client nodes to improve the network capacity and to provide red...

  18. RSS (http://www.iaees.org/publications/journals/ces/rss.xml

    Directory of Open Access Journals (Sweden)

    Computational Ecology and Software (ISSN 2220-721X

    Full Text Available Computational Ecology and Software ISSN 2220-721X URL: http://www.iaees.org/publications/journals/ces/online-version.asp RSS: http://www.iaees.org/publications/journals/ces/rss.xml E-mail: ces@iaees.org Editor-in-Chief: WenJun Zhang Aims and Scope COMPUTATIONAL ECOLOGY AND SOFTWARE (ISSN 2220-721X is an open access, peer-reviewed online journal that considers scientific articles in all different areas of computational ecology. It is the transactions of the International Society of Computational Ecology. The journal is concerned with the ecological researches, constructions and applications of theories and methods of computational sciences including computational mathematics, computational statistics and computer science. It features the simulation, approximation, prediction, recognition, and classification of ecological issues. Intensive computation is one of the major stresses of the journal. The journal welcomes research articles, short communications, review articles, perspectives, and book reviews. The journal also supports the activities of the International Society of Computational Ecology. The topics to be covered by CES include, but are not limited to: •Computation intensive methods, numerical and optimization methods, differential and difference equation modeling and simulation, prediction, recognition, classification, statistical computation (Bayesian computing, randomization, bootstrapping, Monte Carlo techniques, stochastic process, etc., agent-based modeling, individual-based modeling, artificial neural networks, knowledge based systems, machine learning, genetic algorithms, data exploration, network analysis and computation, databases, ecological modeling and computation using Geographical Information Systems, satellite imagery, and other computation intensive theories and methods. •Artificial ecosystems, artificial life, complexity of ecosystems and virtual reality. •The development, evaluation and validation of software and

  19. Application of RSS in Special Libraries

    Directory of Open Access Journals (Sweden)

    Shima Moradi

    2007-07-01

    Full Text Available Despite of ever increasing scope and volume of online information content and the constant need for easy accessibility to these contents, experts in various subject matters always face time constraints when searching for information or looking up their intended resource. Meanwhile, special libraries are faced with diminishing resources, time and human resource needed for providing services and meeting the information need of the said experts. Nowadays Push Technologies, in form of RSS could be used to speed up on-time information dissemination. RSS feeds could spontaneously deliver information to the users. These could be posted on webpages or read by RSS readers. RSS has numerous applications such as web page content update, reading lists, table of contents, current awareness, guides etc. The present paper while outlining RSS as one of the next generation web tools, would point out its various advantages and applications in the new generation of libraries (Lib 2.0,particularly the special libraries. It would also offer pointers to its application in meeting the information needs of experts and users in such libraries.

  20. A Multi-Sensor RSS Spatial Sensing-Based Robust Stochastic Optimization Algorithm for Enhanced Wireless Tethering

    Science.gov (United States)

    Parasuraman, Ramviyas; Fabry, Thomas; Molinari, Luca; Kershaw, Keith; Di Castro, Mario; Masi, Alessandro; Ferre, Manuel

    2014-01-01

    The reliability of wireless communication in a network of mobile wireless robot nodes depends on the received radio signal strength (RSS). When the robot nodes are deployed in hostile environments with ionizing radiations (such as in some scientific facilities), there is a possibility that some electronic components may fail randomly (due to radiation effects), which causes problems in wireless connectivity. The objective of this paper is to maximize robot mission capabilities by maximizing the wireless network capacity and to reduce the risk of communication failure. Thus, in this paper, we consider a multi-node wireless tethering structure called the “server-relay-client” framework that uses (multiple) relay nodes in between a server and a client node. We propose a robust stochastic optimization (RSO) algorithm using a multi-sensor-based RSS sampling method at the relay nodes to efficiently improve and balance the RSS between the source and client nodes to improve the network capacity and to provide redundant networking abilities. We use pre-processing techniques, such as exponential moving averaging and spatial averaging filters on the RSS data for smoothing. We apply a receiver spatial diversity concept and employ a position controller on the relay node using a stochastic gradient ascent method for self-positioning the relay node to achieve the RSS balancing task. The effectiveness of the proposed solution is validated by extensive simulations and field experiments in CERN facilities. For the field trials, we used a youBot mobile robot platform as the relay node, and two stand-alone Raspberry Pi computers as the client and server nodes. The algorithm has been proven to be robust to noise in the radio signals and to work effectively even under non-line-of-sight conditions. PMID:25615734

  1. A Multi-Sensor RSS Spatial Sensing-Based Robust Stochastic Optimization Algorithm for Enhanced Wireless Tethering

    Directory of Open Access Journals (Sweden)

    Ramviyas Parasuraman

    2014-12-01

    Full Text Available The reliability of wireless communication in a network of mobile wireless robot nodes depends on the received radio signal strength (RSS. When the robot nodes are deployed in hostile environments with ionizing radiations (such as in some scientific facilities, there is a possibility that some electronic components may fail randomly (due to radiation effects, which causes problems in wireless connectivity. The objective of this paper is to maximize robot mission capabilities by maximizing the wireless network capacity and to reduce the risk of communication failure. Thus, in this paper, we consider a multi-node wireless tethering structure called the “server-relay-client” framework that uses (multiple relay nodes in between a server and a client node. We propose a robust stochastic optimization (RSO algorithm using a multi-sensor-based RSS sampling method at the relay nodes to efficiently improve and balance the RSS between the source and client nodes to improve the network capacity and to provide redundant networking abilities. We use pre-processing techniques, such as exponential moving averaging and spatial averaging filters on the RSS data for smoothing. We apply a receiver spatial diversity concept and employ a position controller on the relay node using a stochastic gradient ascent method for self-positioning the relay node to achieve the RSS balancing task. The effectiveness of the proposed solution is validated by extensive simulations and field experiments in CERN facilities. For the field trials, we used a youBot mobile robot platform as the relay node, and two stand-alone Raspberry Pi computers as the client and server nodes. The algorithm has been proven to be robust to noise in the radio signals and to work effectively even under non-line-of-sight conditions.

  2. Use of RSS feeds for the implementation of clinical reminder.

    Science.gov (United States)

    Chi, Wen-Chou; Wen, Chia-Hsien; Lin, Chih-Yu; Poon, Sek-Kwong; Huang, Shih-Che

    2012-06-01

    A computer-based reminder system can help physicians get right information and make right decisions in daily clinical work in time. This study presents a RSS-based Clinical Reminding System (RCRS) designed for reminding clinicians to deal with their varied unfinished clinical works. The RCRS was implemented in a hospital to automatically generate messages for every clinician on the basis of clinical information gathered from the hospital information system (HIS) and send them by RSS feed. In order to allow all physicians to participate in the project, the RCRS was integrated with the Computerized Physician Order Entry (COPE) system to provide messages whenever a clinician logs in the HIS; the connection on screen lets the clinician easily make some response. The system can help clinicians focus on patient care without keeping track of the schedule of clinical chores stored in various systems. Two physicians, also directors from Clinical Informatics Research & Development Center (CIRD) who were appointed as project leaders of the RCRS project who went through the entire development process were chosen as interviewees to obtain a preliminary evaluation of the system. The results show the "Information Content" of this system was suggested to be modified, and "Information Accuracy", "Formats", "Ease of use" and "Timeliness" of the system were appropriate to meet the system design purposes.

  3. Mobile robot trajectory tracking using noisy RSS measurements: an RFID approach.

    Science.gov (United States)

    Miah, M Suruz; Gueaieb, Wail

    2014-03-01

    Most RF beacons-based mobile robot navigation techniques rely on approximating line-of-sight (LOS) distances between the beacons and the robot. This is mostly performed using the robot's received signal strength (RSS) measurements from the beacons. However, accurate mapping between the RSS measurements and the LOS distance is almost impossible to achieve in reverberant environments. This paper presents a partially-observed feedback controller for a wheeled mobile robot where the feedback signal is in the form of noisy RSS measurements emitted from radio frequency identification (RFID) tags. The proposed controller requires neither an accurate mapping between the LOS distance and the RSS measurements, nor the linearization of the robot model. The controller performance is demonstrated through numerical simulations and real-time experiments. ©2013 Published by ISA. All rights reserved.

  4. Amplify Your Professional Knowledge through RSS

    Science.gov (United States)

    Stephens, Wendy

    2012-01-01

    In the championship playoffs of professional learning tools, this author contends that there is a clear-cut victor. Customizable, platform-agnostic, able to circumvent filters--both browser and network-imposed--RSS is the best professional learning tool. Reading sites via RSS has appeal for those who want the raw information. With a well-honed…

  5. The Primary Care Electronic Library: RSS feeds using SNOMED-CT indexing for dynamic content delivery.

    Science.gov (United States)

    Robinson, Judas; de Lusignan, Simon; Kostkova, Patty; Madge, Bruce; Marsh, A; Biniaris, C

    2006-01-01

    Rich Site Summary (RSS) feeds are a method for disseminating and syndicating the contents of a website using extensible mark-up language (XML). The Primary Care Electronic Library (PCEL) distributes recent additions to the site in the form of an RSS feed. When new resources are added to PCEL, they are manually assigned medical subject headings (MeSH terms), which are then automatically mapped to SNOMED-CT terms using the Unified Medical Language System (UMLS) Metathesaurus. The library is thus searchable using MeSH or SNOMED-CT. Our syndicate partner wished to have remote access to PCEL coronary heart disease (CHD) information resources based on SNOMED-CT search terms. To pilot the supply of relevant information resources in response to clinically coded requests, using RSS syndication for transmission between web servers. Our syndicate partner provided a list of CHD SNOMED-CT terms to its end-users, a list which was coded according to UMLS specifications. When the end-user requested relevant information resources, this request was relayed from our syndicate partner's web server to the PCEL web server. The relevant resources were retrieved from the PCEL MySQL database. This database is accessed using a server side scripting language (PHP), which enables the production of dynamic RSS feeds on the basis of Source Asserted Identifiers (CODEs) contained in UMLS. Retrieving resources using SNOMED-CT terms using syndication can be used to build a functioning application. The process from request to display of syndicated resources took less than one second. The results of the pilot illustrate that it is possible to exchange data between servers using RSS syndication. This method could be utilised dynamically to supply digital library resources to a clinical system with SNOMED-CT data used as the standard of reference.

  6. An RSS based location estimation technique for cognitive relay networks

    KAUST Repository

    Qaraqe, Khalid A.

    2010-11-01

    In this paper, a received signal strength (RSS) based location estimation method is proposed for a cooperative wireless relay network where the relay is a cognitive radio. We propose a method for the considered cognitive relay network to determine the location of the source using the direct and the relayed signal at the destination. We derive the Cramer-Rao lower bound (CRLB) expressions separately for x and y coordinates of the location estimate. We analyze the effects of cognitive behaviour of the relay on the performance of the proposed method. We also discuss and quantify the reliability of the location estimate using the proposed technique if the source is not stationary. The overall performance of the proposed method is presented through simulations. ©2010 IEEE.

  7. Technical Evaluation Report 58: RSS Windows Editors: First impressions

    Directory of Open Access Journals (Sweden)

    Steve Swettenham

    2006-12-01

    Full Text Available An RSS feed is a list of topics made available from a webpage via a standard XML file format known as RSS, an abbreviation of either Really Simple Syndication or Rich Site Summary (Wikipedia, 2006. The end-user subscribes to their favorite Internet content site via RSS-aware software. Once subscribed, announcements with appropriate links are “pushed” from the publishing site whenever new material is added to that site (see Figure 1. This allows notification of new content of possible interest, fed with anonymity to subscribers, and reduces email clutter.

  8. Human-Induced Effects on RSS Ranging Measurements for Cooperative Positioning

    DEFF Research Database (Denmark)

    Della Rosa, Francescantonio; Pelosi, Mauro; Nurmi, Jari

    2012-01-01

    of human-induced perturbations for enhancing the final positioning accuracy through cooperative schemes has been assessed. It has been proved that the effect of cooperation is very limited if human factors are not taken into account when performing experimental activities.......We present experimental evaluations of human-induced perturbations on received-signal-strength-(RSS-) based ranging measurements for cooperative mobile positioning. To the best of our knowledge, this work is the first attempt to gain insight and understand the impact of both body loss and hand grip...... on the RSS for enhancing proximity measurements among neighbouring devices in cooperative scenarios. Our main contribution is represented by experimental investigations. Analysis of the errors introduced in the distance estimation using path-loss-based methods has been carried out. Moreover, the exploitation...

  9. ManA is regulated by RssAB signaling and promotes motility in Serratia marcescens.

    Science.gov (United States)

    Soo, Po-Chi; Horng, Yu-Tze; Chang, Yung-Lin; Tsai, Wei-Wen; Jeng, Wen-Yih; Lu, Chia-Chen; Lai, Hsin-Chih

    2014-01-01

    Serratia marcescens swarms on 0.8% LB agar at 30 °C but not at 37 °C. To understand the molecular mechanism regulating Serratia swarming, transposon mutagenesis was performed to screen for mutants that swarmed at 37 °C. In one mutant, S. marcescens WW100, the transposon was inserted in the upstream region of manA, which encodes mannose-6-phosphate isomerase, a type I phosphomannose isomerase. The transcriptional and translational levels of manA were higher in S. marcescens WW100 than in the wild-type strain. S. marcescens WW100 produced more serrawettin W1 (biosurfactant) than the wild-type, as detected by thin-layer chromatography, to promote surface motility by reducing surface tension. Serratia swarming was previously shown to be negatively regulated by the RssA-RssB two-component system. An electrophoretic mobility shift assay (EMSA) indicated that phosphorylated RssB (the response regulator) binds upstream of the transposon insertion site and manA in S. marcescens WW100. Analysis by real-time RT-PCR (qRT-PCR) revealed that, compared to the wild-type level, manA mRNA was increased in the rssA deletion mutant. The results indicated that RssA-RssB signaling directly represses the expression of manA and that overexpression of manA increases the production of serrawettin for Serratia swarming at 37 °C. Copyright © 2013 Institut Pasteur. All rights reserved.

  10. On the Dynamic RSS Feedbacks of Indoor Fingerprinting Databases for Localization Reliability Improvement.

    Science.gov (United States)

    Wen, Xiaoyang; Tao, Wenyuan; Own, Chung-Ming; Pan, Zhenjiang

    2016-08-15

    Location data is one of the most widely used context data types in context-aware and ubiquitous computing applications. To support locating applications in indoor environments, numerous systems with different deployment costs and positioning accuracies have been developed over the past decade. One useful method, based on received signal strength (RSS), provides a set of signal transmission access points. However, compiling a remeasurement RSS database involves a high cost, which is impractical in dynamically changing environments, particularly in highly crowded areas. In this study, we propose a dynamic estimation resampling method for certain locations chosen from a set of remeasurement fingerprinting databases. Our proposed method adaptively applies different, newly updated and offline fingerprinting points according to the temporal and spatial strength of the location. To achieve accuracy within a simulated area, the proposed method requires approximately 3% of the feedback to attain a double correctness probability comparable to similar methods; in a real environment, our proposed method can obtain excellent 1 m accuracy errors in the positioning system.

  11. On the Dynamic RSS Feedbacks of Indoor Fingerprinting Databases for Localization Reliability Improvement

    Directory of Open Access Journals (Sweden)

    Xiaoyang Wen

    2016-08-01

    Full Text Available Location data is one of the most widely used context data types in context-aware and ubiquitous computing applications. To support locating applications in indoor environments, numerous systems with different deployment costs and positioning accuracies have been developed over the past decade. One useful method, based on received signal strength (RSS, provides a set of signal transmission access points. However, compiling a remeasurement RSS database involves a high cost, which is impractical in dynamically changing environments, particularly in highly crowded areas. In this study, we propose a dynamic estimation resampling method for certain locations chosen from a set of remeasurement fingerprinting databases. Our proposed method adaptively applies different, newly updated and offline fingerprinting points according to the temporal and spatial strength of the location. To achieve accuracy within a simulated area, the proposed method requires approximately 3% of the feedback to attain a double correctness probability comparable to similar methods; in a real environment, our proposed method can obtain excellent 1 m accuracy errors in the positioning system.

  12. Compressed RSS Measurement for Communication and Sensing in the Internet of Things

    Directory of Open Access Journals (Sweden)

    Yanchao Zhao

    2017-01-01

    Full Text Available The receiving signal strength (RSS is crucial for the Internet of Things (IoT, as it is the key foundation for communication resource allocation, localization, interference management, sensing, and so on. Aside from its significance, the measurement process could be tedious, time consuming, inaccurate, and involving human operations. The state-of-the-art works usually applied the fashion of “measure a few, predict many,” which use measurement calibrated models to generate the RSS for the whole networks. However, this kind of methods still cannot provide accurate results in a short duration with low measurement cost. In addition, they also require careful scheduling of the measurement which is vulnerable to measurement conflict. In this paper, we propose a compressive sensing- (CS- based RSS measurement solution, which is conflict-tolerant, time-efficient, and accuracy-guaranteed without any model-calibrate operation. The CS-based solution takes advantage of compressive sensing theory to enable simultaneous measurement in the same channel, which reduces the time cost to the level of O(log⁡N (where N is the network size and works well for sparse networks. Extensive experiments based on real data trace are conducted to show the efficiency of the proposed solutions.

  13. Uav Positioning and Collision Avoidance Based on RSS Measurements

    Science.gov (United States)

    Masiero, A.; Fissore, F.; Guarnieri, A.; Pirotti, F.; Vettore, A.

    2015-08-01

    In recent years, Unmanned Aerial Vehicles (UAVs) are attracting more and more attention in both the research and industrial communities: indeed, the possibility to use them in a wide range of remote sensing applications makes them a very flexible and attractive solution in both civil and commercial cases (e.g. precision agriculture, security and control, monitoring of sites, exploration of areas difficult to reach). Most of the existing UAV positioning systems rely on the use of the GPS signal. Despite this can be a satisfactory solution in open environments where the GPS signal is available, there are several operating conditions of interest where it is unavailable or unreliable (e.g. close to high buildings, or mountains, in indoor environments). Consequently, a different approach has to be adopted in these cases. This paper considers the use ofWiFi measurements in order to obtain position estimations of the device of interest. More specifically, to limit the costs for the devices involved in the positioning operations, an approach based on radio signal strengths (RSS) measurements is considered. Thanks to the use of a Kalman filter, the proposed approach takes advantage of the temporal dynamic of the device of interest in order to improve the positioning results initially provided by means of maximum likelihood estimations. The considered UAVs are assumed to be provided with communication devices, which can allow them to communicate with each other in order to improve their cooperation abilities. In particular, the collision avoidance problem is examined in this work.

  14. RSS (http://www.iaees.org/publications/journals/arthropods/rss.xml

    Directory of Open Access Journals (Sweden)

    Arthropods (ISSN 2224-4255

    Full Text Available Arthropods ISSN 2224-4255 URL: http://www.iaees.org/publications/journals/arthropods/online-version.asp RSS: http://www.iaees.org/publications/journals/arthropods/rss.xml E-mail: arthropods@iaees.org Editor-in-Chief: WenJun Zhang Aims and Scope ARTHROPODS (ISSN 2224-4255 is an international journal devoted to the publication of articles on various aspects of arthropods, e.g., ecology, biogeography, systematics, biodiversity (species diversity, genetic diversity, et al., conservation, control, etc. The journal provides a forum for examining the importance of arthropods in biosphere (both terrestrial and marine ecosystems and human life in such fields as agriculture, forestry, fishery, environmental management and human health. The scope of Arthropods is wide and embraces all arthropods-insects, arachnids, crustaceans, centipedes, millipedes, and other arthropods. Articles/short communications on new taxa (species, genus, families, orders, etc. and new records of arthropods are particularly welcome. Authors can submit their works to the email box of this journal, arthropods@iaees.org. All manuscripts submitted to this journal must be previously unpublished and may not be considered for publication elsewhere at any time during review period of this journal. Authors are asked to read Author Guidelines before submitting manuscripts. In addition to free submissions from authors around the world, special issues are also accepted. The organizer of a special issue can collect submissions (yielded from a research project, a research group, etc. on a specific research topic, or submissions of a scientific conference for publication of special issue.

  15. Machine Learning Untuk Estimasi Posisi Objek Berbasis RSS Fingerprint Menggunakan IEEE 802.11g Pada Lantai 3 Gedung JTETI UGM

    Directory of Open Access Journals (Sweden)

    Chairani Chairani

    2015-05-01

    Full Text Available Penelitian ini membahas tentang estimasi posisi (localization objek dalam gedung menggunakan jaringan wireless atau IEEE 802.11g dengan pendekatan Machine Learning. Metode pada pengukuran RSS menggunakan RSS-based fingerprint.  Algoritma Machine Learning yang digunakan dalam memperkirakan lokasi dari pengukuran RSS-based menggunakan Naive Bayes.  Localization dilakukan pada lantai 3 gedung Jurusan Teknik Elektro dan Teknologi Informasi (JTETI dengan luas 1969,68 m2 dan memiliki 5 buah titik penempatan access point (AP. Untuk membentuk peta fingerprint digunakan dimensi 1 m x 1 m sehingga terbentuk grid sebanyak  1893 buah. Dengan menggunakan software Net Surveyor terkumpul data kekuatan sinyal yang diterima (RSS dari jaringan wireless ke perangkat penerima (laptop sebanyak 86.980 record. Hasil nilai rata-rata error jarak estimasi untuk localization seluruh ruangan di lantai 3 dengan menggunakan algoritma Naive Bayes pada fase offline tahap learning adalah 6,29 meter. Untuk fase online dan tahap post learning diperoleh rata-rata error jarak estimasi sebesar 7,82 meter.

  16. Rotating Shadowband Spectroradiometer (RSS) Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Kiedron, P; Schlemmer, J; Klassen, M

    2005-01-01

    The rotating shawdowband spectroradiometer (RSS) implements the same automated shadowbanding technique used by the multifilter rotating shadowband radiometer (MFRSR), and so it too provides spectrally-resolved, direct-normal, diffuse-horizontal, and total-horizontal irradiances, and can be calibrated in situ via Langley regression. The irradiance spectra are measured simultaneously at all spectral elements (pixels) in 360-nm to 1050-nm range.

  17. RSS (http://www.iaees.org/publications/journals/environsc/rss.xml

    Directory of Open Access Journals (Sweden)

    Environmental Skeptics and Critics (ISSN 2224-4263

    Full Text Available Environmental Skeptics and Critics ISSN 2224-4263 URL: http://www.iaees.org/publications/journals/environsc/online-version.asp RSS: http://www.iaees.org/publications/journals/environsc/rss.xml E-mail: environsc@iaees.org Editor-in-Chief: WenJun Zhang Aims and Scope The more truth is debated, the clearer it becomes. Science will not proceed without debate and controversy. Wide and in-depth debate and controversy on human's knowledge, attitudes, policies and practices on the environment determines the future of our planet. There are numerous controversial and potentially controversial issues on environmental sciences and practices. ENVIRONMENTAL SKEPTICS and CRITICS (ISSN 2224-4263 is an international journal devoted to the publication of skeptical and critical articles/short communications/letters on theories, viewpoints, methodologies, practices, policies, etc., in ecological and environmental areas. The journal provides a forum for questioning, disputing, arguing, challenging, criticizing and judging known theories, methdologies, practices, and policies, etc., or presenting different ideas. The scope of Environmental Skeptics and Critics is wide and embraces all controversial, non-conclusive or unexplained issues in ecological and environmental areas. Authors can submit their works to the email box of this journal, environsc@iaees.org. All manuscripts submitted to this journal must be previously unpublished and may not be considered for publication elsewhere at any time during review period of this journal. Authors are asked to read Author Guidelines before submitting manuscripts. In addition to free submissions from authors around the world, special issues are also accepted. The organizer of a special issue can collect submissions (yielded from a research project, a research group, etc. on a specific research topic, or submissions of a scientific conference for publication of special issue.

  18. Monitoring growth and movement of Ralstonia solanacearum cells harboring plasmid pRSS12 derived from bacteriophage phiRSS1.

    Science.gov (United States)

    Fujie, Makoto; Takamoto, Hirofumi; Kawasaki, Takeru; Fujiwara, Akiko; Yamada, Takashi

    2010-02-01

    We monitored growth and movement of Ralstonia solanacearum harboring the plasmid pRSS12 in tomato seedlings. The plasmid contains a gene for green fluorescent protein (GFP) and is stably maintained in R. solanacearum cells without selection pressure. Bacteria harboring the plasmid can be tracked in planta by visualizing GFP fluorescence. Stems of seedlings were infected with R. solanacearum cells transformed with pRSS12, and bacterial growth and movement, particularly around the vascular bundles, were monitored for more than 7 days. Our results showed that vascular bundles are independent of each other within the stem, and that it takes a long time for R. solanacearum cells to migrate from one vascular bundle to another. For real-time monitoring of bacteria in planta, tomato seedlings were grown on agar medium and bacterial suspension was applied to the root apex. The bacterial invasion process was monitored by fluorescent microscopy. Bacteria invaded taproots within 6 h, and movement of the bacteria was observed until 144 h after inoculation. In susceptible tomato cultivars, strong GFP fluorescence was observed in hypocotyls and lateral roots as well as the taproot. In resistant cultivars, however, GFP fluorescence was rarely observed on lateral roots. Our results show that this monitoring system can be used to assess bacterial pathogenicity efficiently. Copyright (c) 2009 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  19. NOAA Climate Data Record (CDR) of SSM/I and SSMIS Microwave Brightness Temperatures, RSS Version 7

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This Version 7 NOAA Fundamental Climate Data Record (CDR) from Remote Sensing Systems (RSS) contains brightness temperatures that have been inter-calibrated and...

  20. The Primary Care Electronic Library: RSS feeds using SNOMED-CT indexing for dynamic content delivery

    Directory of Open Access Journals (Sweden)

    Judas Robinson

    2006-12-01

    Conclusion The results of the pilot illustrate that it is possible to exchange data between servers using RSS syndication. This method could be utilised dynamically to supply digital library resources to a clinical system with SNOMED-CTdata used as the standard of reference.

  1. Application of RSS in Special Libraries

    OpenAIRE

    Shima Moradi

    2007-01-01

    Despite of ever increasing scope and volume of online information content and the constant need for easy accessibility to these contents, experts in various subject matters always face time constraints when searching for information or looking up their intended resource. Meanwhile, special libraries are faced with diminishing resources, time and human resource needed for providing services and meeting the information need of the said experts. Nowadays Push Technologies, in form of RSS could b...

  2. R2NA: Received Signal Strength (RSS Ratio-Based Node Authentication for Body Area Network

    Directory of Open Access Journals (Sweden)

    Yang Wu

    2013-12-01

    Full Text Available The body area network (BAN is an emerging branch of wireless sensor networks for personalized applications. The services in BAN usually have a high requirement on security, especially for the medical diagnosis. One of the fundamental directions to ensure security in BAN is how to provide node authentication. Traditional research using cryptography relies on prior secrets shared among nodes, which leads to high resource cost. In addition, most existing non-cryptographic solutions exploit out-of-band (OOB channels, but they need the help of additional hardware support or significant modifications to the system software. To avoid the above problems, this paper presents a proximity-based node authentication scheme, which only uses wireless modules equipped on sensors. With only one sensor and one control unit (CU in BAN, we could detect a unique physical layer characteristic, namely, the difference between the received signal strength (RSS measured on different devices in BAN. Through the above-mentioned particular difference, we can tell whether the sender is close enough to be legitimate. We validate our scheme through both theoretical analysis and experiments, which are conducted on the real Shimmer nodes. The results demonstrate that our proposed scheme has a good security performance.

  3. Monitoring of phytopathogenic Ralstonia solanacearum cells using green fluorescent protein-expressing plasmid derived from bacteriophage phiRSS1.

    Science.gov (United States)

    Kawasaki, Takeru; Satsuma, Hideki; Fujie, Makoto; Usami, Shoji; Yamada, Takashi

    2007-12-01

    A green fluorescent protein (GFP)-expressing plasmid was constructed from a filamentous bacteriophage phiRSS1 that infects the phytopathogen Ralstonia solanacearum. This plasmid designated as pRSS12 (4.7 kbp in size) consists of an approximately 2248 bp region of the phiRSS1 RF DNA, including ORF1-ORF3 and the intergenic region (IG), and a Km cassette in addition to the GFP gene. It was easily introduced by electroporation and stably maintained even without selective pressure in strains of R. solanacearum of different races and biovars. Strong green fluorescence emitted from pRSS12-transformed bacterial cells was easily monitored in tomato tissues (stem, petiole, and root) after infection as well as from soil samples. These results suggest that pRSS12 can serve as an easy-to-use GFP-tagging tool for any given strain of R. solanacearum in cytological as well as field studies.

  4. Efficient Underwater RSS Value to Distance Inversion Using the Lambert Function

    Directory of Open Access Journals (Sweden)

    Majid Hosseini

    2014-01-01

    Full Text Available There are many applications for using wireless sensor networks (WSN in ocean science; however, identifying the exact location of a sensor by itself (localization is still a challenging problem, where global positioning system (GPS devices are not applicable underwater. Precise distance measurement between two sensors is a tool of localization and received signal strength (RSS, reflecting transmission loss (TL phenomena, is widely used in terrestrial WSNs for that matter. Underwater acoustic sensor networks have not been used (UASN, due to the complexity of the TL function. In this paper, we addressed these problems by expressing underwater TL via the Lambert W function, for accurate distance inversion by the Halley method, and compared this to Newton-Raphson inversion. Mathematical proof, MATLAB simulation, and real device implementation demonstrate the accuracy and efficiency of the proposed equation in distance calculation, with fewer iterations, computation stability for short and long distances, and remarkably short processing time. Then, the sensitivities of Lambert W function and Newton-Raphson inversion to alteration in TL were examined. The simulation results showed that Lambert W function is more stable to errors than Newton-Raphson inversion. Finally, with a likelihood method, it was shown that RSS is a practical tool for distance measurement in UASN.

  5. Received Signal Strength Database Interpolation by Kriging for a Wi-Fi Indoor Positioning System.

    Science.gov (United States)

    Jan, Shau-Shiun; Yeh, Shuo-Ju; Liu, Ya-Wen

    2015-08-28

    The main approach for a Wi-Fi indoor positioning system is based on the received signal strength (RSS) measurements, and the fingerprinting method is utilized to determine the user position by matching the RSS values with the pre-surveyed RSS database. To build a RSS fingerprint database is essential for an RSS based indoor positioning system, and building such a RSS fingerprint database requires lots of time and effort. As the range of the indoor environment becomes larger, labor is increased. To provide better indoor positioning services and to reduce the labor required for the establishment of the positioning system at the same time, an indoor positioning system with an appropriate spatial interpolation method is needed. In addition, the advantage of the RSS approach is that the signal strength decays as the transmission distance increases, and this signal propagation characteristic is applied to an interpolated database with the Kriging algorithm in this paper. Using the distribution of reference points (RPs) at measured points, the signal propagation model of the Wi-Fi access point (AP) in the building can be built and expressed as a function. The function, as the spatial structure of the environment, can create the RSS database quickly in different indoor environments. Thus, in this paper, a Wi-Fi indoor positioning system based on the Kriging fingerprinting method is developed. As shown in the experiment results, with a 72.2% probability, the error of the extended RSS database with Kriging is less than 3 dBm compared to the surveyed RSS database. Importantly, the positioning error of the developed Wi-Fi indoor positioning system with Kriging is reduced by 17.9% in average than that without Kriging.

  6. Visual Sentiment Analysis of RSS News Feeds Featuring the US Presidential Election in 2008

    OpenAIRE

    Wanner, Franz; Rohrdantz, Christian; Mansmann, Florian; Oelke, Daniela; Keim, Daniel A.

    2009-01-01

    The technology behind RSS feeds offers great possibilities to retrieve more news items than ever. In contrast to these technical developments, human capabilities to read all these news items have not increased likewise. To bridge this gap, this paper presents a visual analytics tool for conducting semi-automatic sentiment analysis of large news feeds. While the tool automatically retrieves and analyzes RSS feeds with respect to positive and negative opinion words, the more demanding news anal...

  7. Rashtriya Swayamsewak Sangh (RSS): History, Ideology and Its Influences on Indian Policy Towards Pakistan

    Science.gov (United States)

    2015-05-21

    www.ciaonet.org/pbei/csis/sam/sam55/. 32 Pathak, K. K. Of Jaswant Singh, the BJP and the RSS. Mumbai : The Rajaji Foundation, 2010. Accessed 10 August...common holy ground, a common blood and a common culture . It is also noteworthy to mention that Buddhists, Jains and Sikhs were included in this...martin-marty/hindu-fundamentalism _b_5352547.html . 71 Ibid. 72 Pathak, K. K. Of Jaswant Singh, the BJP and the RSS. Mumbai : The Rajaji

  8. BOREAS RSS-7 Landsat TM LAI IMages of the SSA and NSA

    Science.gov (United States)

    Hall, Forrest G. (Editor); Nickeson, Jaime (Editor); Chen, Jing; Cihlar, Josef

    2000-01-01

    The BOReal Ecosystem-Atmosphere Study Remote Sensing Science (BOREAS RSS-7) team used Landsat Thematic Mapper (TM) images processed at CCRS to produce images of Leaf Area Index (LAI) for the BOREAS study areas. Two images acquired on 06-Jun and 09-Aug-1991 were used for the SSA, and one image acquired on 09-Jun-1994 was used for the NSA. The LAI images are based on ground measurements and Landsat TM Reduced Simple Ratio (RSR) images. The data are stored in binary image-format files.

  9. A connecter-like factor, CacA, links RssB/RpoS and the CpxR/CpxA two-component system in Salmonella.

    Science.gov (United States)

    Kato, Akinori; Hayashi, Hironori; Nomura, Wataru; Emori, Haruka; Hagihara, Kei; Utsumi, Ryutaro

    2012-10-02

    Bacteria integrate numerous environmental stimuli when generating cellular responses. Increasing numbers of examples describe how one two-component system (TCS) responds to signals detected by the sensor of another TCS. However, the molecular mechanisms underlying this phenomenon remain poorly defined. Here, we report a connector-like factor that affects the activity of the CpxR/CpxA two-component system in Salmonella enterica serovar Typhimurium. We isolated a clone that induced the expression of a cpxP-lac gene fusion from a high-copy-number plasmid pool of random Salmonella genomic fragments. A 63-amino acid protein, CacA, was responsible for the CpxA/CpxR-dependent activation of the cpxP gene. The CpxR-activated genes cpxP and spy exhibited approximately 30% and 50% reductions in transcription, respectively, in a clean cacA deletion mutant strain in comparison to wild-type. From 33 response regulator (RR) deletion mutants, we identified that the RssB regulator represses cacA transcription. Substitution mutations in a conserved -10 region harboring the RNA polymerase recognition sequence, which is well conserved with a known RpoS -10 region consensus sequence, rendered the cacA promoter RpoS-independent. The CacA-mediated induction of cpxP transcription was affected in a trxA deletion mutant, which encodes thioredoxin 1, suggesting a role for cysteine thiol-disulfide exchange(s) in CacA-dependent Cpx activation. We identified CacA as an activator of the CpxR/CpxA system in the plasmid clone. We propose that CacA may integrate the regulatory status of RssB/RpoS into the CpxR/CpxA system. Future investigations are necessary to thoroughly elucidate how CacA activates the CpxR/CpxA system.

  10. A connecter-like factor, CacA, links RssB/RpoS and the CpxR/CpxA two-component system in Salmonella

    Directory of Open Access Journals (Sweden)

    Kato Akinori

    2012-10-01

    Full Text Available Abstract Background Bacteria integrate numerous environmental stimuli when generating cellular responses. Increasing numbers of examples describe how one two-component system (TCS responds to signals detected by the sensor of another TCS. However, the molecular mechanisms underlying this phenomenon remain poorly defined. Results Here, we report a connector-like factor that affects the activity of the CpxR/CpxA two-component system in Salmonella enterica serovar Typhimurium. We isolated a clone that induced the expression of a cpxP-lac gene fusion from a high-copy-number plasmid pool of random Salmonella genomic fragments. A 63-amino acid protein, CacA, was responsible for the CpxA/CpxR-dependent activation of the cpxP gene. The CpxR-activated genes cpxP and spy exhibited approximately 30% and 50% reductions in transcription, respectively, in a clean cacA deletion mutant strain in comparison to wild-type. From 33 response regulator (RR deletion mutants, we identified that the RssB regulator represses cacA transcription. Substitution mutations in a conserved -10 region harboring the RNA polymerase recognition sequence, which is well conserved with a known RpoS -10 region consensus sequence, rendered the cacA promoter RpoS-independent. The CacA-mediated induction of cpxP transcription was affected in a trxA deletion mutant, which encodes thioredoxin 1, suggesting a role for cysteine thiol-disulfide exchange(s in CacA-dependent Cpx activation. Conclusions We identified CacA as an activator of the CpxR/CpxA system in the plasmid clone. We propose that CacA may integrate the regulatory status of RssB/RpoS into the CpxR/CpxA system. Future investigations are necessary to thoroughly elucidate how CacA activates the CpxR/CpxA system.

  11. The Pointer Optimization Strategy Based on the distributed RSs in the Mobile IP Network%移动IP中基于分布式注册服务器的指针优化策略

    Institute of Scientific and Technical Information of China (English)

    康凯; 郭伟; 吴诗其

    2002-01-01

    Mobility management is one of the key problems in the mobile communication techniques. The performance of the mobile communication networks is heavily depended on the effectiveness of the mobility management. In this paper, we have presented a protocol of the mobility management in the mobile IP networks, based on the distributed RSs. When the mobile user in the inactive connection handoffs, some pointers are constructed and modified by the RSs and routers. It can realize the local registration; only when a call arrives, the possible update operations of the mobile database are needed. Consequently, the access of the RS is limited, and the cost of the mobility management is also reduced.

  12. Novel Received Signal Strength-Based Indoor Location System: Development and Testing

    Directory of Open Access Journals (Sweden)

    Álvarez Yuri

    2010-01-01

    Full Text Available A received signal strength- (RSS-based indoor location method (ILS for person/assets location in indoor scenarios is presented in this paper. Theoretical bases of the method are the integral equations relating the electromagnetic (EM fields with their sources, establishing a cost function relating the measured field at the receivers and the unknown position of the transmitter. The aim is to improve the EM characterization of the scenario yielding in a more accurate indoor location method. Regarding network infrastructure implementation, a set of receivers are deployed through the coverage area, measuring the RSS value from a transmitter node which is attached to the asset to be located. The location method is evaluated in several indoor scenarios using portable measurement equipment. The next step has been the network hardware implementation using a wireless sensor network: for this purpose, ZigBee nodes have been selected. Finally, RSS measurements variability due to multipath effects and nonline-of-sight between transmitter and receiver nodes is mitigated using calibration and a correction based on the difference between the free space field decay law and the measured RSS.

  13. Fils RSS | CRDI - Centre de recherches pour le développement ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cliquez sur le fil pour ajouter votre site ou votre lecteur RSS préféré Fil de financement du CRDI Fil des nouvelles du CRDI Fil des perspectives du CRDI Fil des projets du CRDI Fil des publications du CRDI.

  14. Graph-Based Semi-Supervised Learning for Indoor Localization Using Crowdsourced Data

    Directory of Open Access Journals (Sweden)

    Liye Zhang

    2017-04-01

    Full Text Available Indoor positioning based on the received signal strength (RSS of the WiFi signal has become the most popular solution for indoor localization. In order to realize the rapid deployment of indoor localization systems, solutions based on crowdsourcing have been proposed. However, compared to conventional methods, lots of different devices are used in crowdsourcing system and less RSS values are collected by each device. Therefore, the crowdsourced RSS values are more erroneous and can result in significant localization errors. In order to eliminate the signal strength variations across diverse devices, the Linear Regression (LR algorithm is proposed to solve the device diversity problem in crowdsourcing system. After obtaining the uniform RSS values, a graph-based semi-supervised learning (G-SSL method is used to exploit the correlation between the RSS values at nearby locations to estimate an optimal RSS value at each location. As a result, the negative effect of the erroneous measurements could be mitigated. Since the AP locations need to be known in G-SSL algorithm, the Compressed Sensing (CS method is applied to precisely estimate the location of the APs. Based on the location of the APs and a simple signal propagation model, the RSS difference between different locations is calculated and used as an additional constraint to improve the performance of G-SSL. Furthermore, to exploit the sparsity of the weights used in the G-SSL, we use the CS method to reconstruct these weights more accurately and make a further improvement on the performance of the G-SSL. Experimental results show improved results in terms of the smoothness of the radio map and the localization accuracy.

  15. PubMed Informer: Monitoring MEDLINE/PubMed through E-mail Alerts, SMS, PDA downloads and RSS feeds

    Science.gov (United States)

    Muin, Michael; Fontelo, Paul; Ackerman, Michael

    2005-01-01

    Summary PubMed Informer is a Web-based monitoring tool for topics of interest from MEDLINE/PubMed primarily designed for healthcare professionals. Five tracking methods are available: Web access, e-mail, Short Message Service (SMS), PDA downloads and RSS feeds. PubMed Informer delivers focused search updates and specific information to users with varying information-seeking practices. PMID:16779344

  16. RSS SSMIS OCEAN PRODUCT GRIDS DAILY FROM DMSP F17 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSMIS Ocean Product Grids Daily from DMSP F17 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  17. RSS SSMIS OCEAN PRODUCT GRIDS DAILY FROM DMSP F16 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSMIS Ocean Product Grids Daily from DMSP F16 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  18. RSS SSM/I OCEAN PRODUCT GRIDS DAILY FROM DMSP F14 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Daily from DMSP F14 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  19. RSS SSM/I OCEAN PRODUCT GRIDS DAILY FROM DMSP F11 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Daily from DMSP F11 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  20. RSS SSM/I OCEAN PRODUCT GRIDS DAILY FROM DMSP F13 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Daily from DMSP F13 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  1. Improving RF Transmit Power and Received Signal Strength in 2.4 GHz ZigBee Based Active RFID System with Embedded Method

    Science.gov (United States)

    Po'ad, F. A.; Ismail, W.; Jusoh, J. F.

    2017-08-01

    This paper describes the experiments and analysis conducted on 2.4 GHz embedded active Radio Frequency Identification (RFID) - Wireless Sensor Network (WSN) based system that has been developed for the purposes of location tracking and monitoring in indoor and outdoor environments. Several experiments are conducted to test the effectiveness and performance of the developed system and two of them is by measuring the Radio Frequency (RF) transmitting power and Received Signal Strength (RSS) to prove that the embedded active RFID tag is capable to generate higher transmit power during data transmission and able to provide better RSS reading compared to standalone RFID tag. Experiments are carried out on two RFID tags which are active RFID tag embedded with GPS and GSM (ER2G); and standalone RFID tag communicating with the same active RFID reader. The developed ER2G contributes 12.26 % transmit power and 6.47 % RSS reading higher than standalone RFID tag. The results conclude that the ER2G gives better performance compared to standalone RFID tag and can be used as guidelines for future design improvements.

  2. RSS SSM/I OCEAN PRODUCT GRIDS MONTHLY AVERAGE FROM DMSP F15 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Monthly Average from DMSP F15 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special...

  3. RSS SSM/I OCEAN PRODUCT GRIDS WEEKLY AVERAGE FROM DMSP F15 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Weekly Average from DMSP F15 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  4. RSS SSMIS OCEAN PRODUCT GRIDS 3-DAY AVERAGE FROM DMSP F16 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSMIS Ocean Product Grids 3-Day Average from DMSP F16 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  5. RSS SSM/I OCEAN PRODUCT GRIDS WEEKLY AVERAGE FROM DMSP F10 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Weekly Average from DMSP F10 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  6. RSS SSM/I OCEAN PRODUCT GRIDS WEEKLY AVERAGE FROM DMSP F8 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSM/I Ocean Products Grid Weekly Average from DMSP F8 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  7. Development of hybrid artificial intelligent based handover decision algorithm

    Directory of Open Access Journals (Sweden)

    A.M. Aibinu

    2017-04-01

    Full Text Available The possibility of seamless handover remains a mirage despite the plethora of existing handover algorithms. The underlying factor responsible for this has been traced to the Handover decision module in the Handover process. Hence, in this paper, the development of novel hybrid artificial intelligent handover decision algorithm has been developed. The developed model is made up of hybrid of Artificial Neural Network (ANN based prediction model and Fuzzy Logic. On accessing the network, the Received Signal Strength (RSS was acquired over a period of time to form a time series data. The data was then fed to the newly proposed k-step ahead ANN-based RSS prediction system for estimation of prediction model coefficients. The synaptic weights and adaptive coefficients of the trained ANN was then used to compute the k-step ahead ANN based RSS prediction model coefficients. The predicted RSS value was later codified as Fuzzy sets and in conjunction with other measured network parameters were fed into the Fuzzy logic controller in order to finalize handover decision process. The performance of the newly developed k-step ahead ANN based RSS prediction algorithm was evaluated using simulated and real data acquired from available mobile communication networks. Results obtained in both cases shows that the proposed algorithm is capable of predicting ahead the RSS value to about ±0.0002 dB. Also, the cascaded effect of the complete handover decision module was also evaluated. Results obtained show that the newly proposed hybrid approach was able to reduce ping-pong effect associated with other handover techniques.

  8. Penelitian “rubber blend” antara karet alam rss dengan karet sintesis jsr 0061 untuk sol ringan sesuai sni 12-0778-1989

    Directory of Open Access Journals (Sweden)

    Penny Setyowati

    1997-12-01

    Full Text Available The objective of this research is to find composision of rubber blend of RSS and JSR 0061 and Carbon black for preparation light rubber sole compound and stabile on high process temperature that give the best fisical properties and the best sole product at moulding vulcanization trial. The best rubber compound to be reached at the compound formulation R III with composision of RSS 90 phr, JSR 0061 10 phr dan carbon black 40 phr.

  9. A novel video recommendation system based on efficient retrieval of human actions

    Science.gov (United States)

    Ramezani, Mohsen; Yaghmaee, Farzin

    2016-09-01

    In recent years, fast growth of online video sharing eventuated new issues such as helping users to find their requirements in an efficient way. Hence, Recommender Systems (RSs) are used to find the users' most favorite items. Finding these items relies on items or users similarities. Though, many factors like sparsity and cold start user impress the recommendation quality. In some systems, attached tags are used for searching items (e.g. videos) as personalized recommendation. Different views, incomplete and inaccurate tags etc. can weaken the performance of these systems. Considering the advancement of computer vision techniques can help improving RSs. To this end, content based search can be used for finding items (here, videos are considered). In such systems, a video is taken from the user to find and recommend a list of most similar videos to the query one. Due to relating most videos to humans, we present a novel low complex scalable method to recommend videos based on the model of included action. This method has recourse to human action retrieval approaches. For modeling human actions, some interest points are extracted from each action and their motion information are used to compute the action representation. Moreover, a fuzzy dissimilarity measure is presented to compare videos for ranking them. The experimental results on HMDB, UCFYT, UCF sport and KTH datasets illustrated that, in most cases, the proposed method can reach better results than most used methods.

  10. RSS SSM/I OCEAN PRODUCT GRIDS 3-DAY AVERAGE FROM DMSP F14 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids 3-Day Average from DMSP F14 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  11. RSS SSM/I OCEAN PRODUCT GRIDS 3-DAY AVERAGE FROM DMSP F10 NETCDF V7

    Data.gov (United States)

    National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids 3-Day Average from DMSP F10 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

  12. SUSTENTABILIDADE NA GESTÃO DE RESÍDUOS DE SERVIÇOS DE SAÚDE (RSS EM INSTITUIÇÕES DE SAÚDE: UM OVERVIEW SOBRE O ESTADO DA ARTE

    Directory of Open Access Journals (Sweden)

    Jackeline Neres dos Santos

    2013-09-01

    Full Text Available O desenvolvimento da sociedade moderna nas últimas décadas principalmente nos quesitos tecnológico e industrial trouxe um conjunto de melhorias significativas à população no âmbito da saúde, infraestrutura, educação, saneamento básico entre outras. No entanto, o mesmo desenvolvimento que alavanca a qualidade de vida da população, proporciona novos desafios à sociedade moderna como, por exemplo, a grande produção e o gerenciamento dos Resíduos de Serviços de Saúde – RSS. O presente trabalho teve como principal objetivo realizar um levantamento do atual estado da arte sobre o tema sustentabilidade na gestão de Resíduos de Serviços de Saúde (RSS em instituições de saúde brasileiras destacando o papel do enfermeiro junto a equipes multidisciplinares no tratamento do tema. Foram consultadas fontes bibliográficas consolidadas tais como ivros, revistas, teses, dissertações, monografias e publicações científicas obtidas via repertórios científicos como Web Of Science, Scientific Electronic Library Online (SciELO, Google Acadêmico, Biblioteca Virtual em Saúde (BVS e Literatura Latino-Americana e do Caribe em Ciências da Saúde (LILACS, desde 2005. Temas como: (i Legislação Vigente para Área; (ii Atual Panorama dos RSS no Brasil; (iii Discussão sobre o Papel do Enfermeiro no Gerenciamento dos RSS – Aspectos gerais, Papel do enfermeiro à luz da Teoria Ambientalista de Florence Nightingale, Gerenciamento dos RSS: papel do enfermeiro versus custo; (iv Destinação e Eliminação Adequada para os RSS; e (v Sustentabilidade Ambiental no Gerenciamento dos RSS foram levantados, investigados e discutidos.

  13. Adaptive Indoor Positioning Model Based on WLAN-Fingerprinting for Dynamic and Multi-Floor Environments

    Directory of Open Access Journals (Sweden)

    Iyad Husni Alshami

    2017-08-01

    Full Text Available The Global Positioning System demonstrates the significance of Location Based Services but it cannot be used indoors due to the lack of line of sight between satellites and receivers. Indoor Positioning Systems are needed to provide indoor Location Based Services. Wireless LAN fingerprints are one of the best choices for Indoor Positioning Systems because of their low cost, and high accuracy, however they have many drawbacks: creating radio maps is time consuming, the radio maps will become outdated with any environmental change, different mobile devices read the received signal strength (RSS differently, and peoples’ presence in LOS between access points and mobile device affects the RSS. This research proposes a new Adaptive Indoor Positioning System model (called DIPS based on: a dynamic radio map generator, RSS certainty technique and peoples’ presence effect integration for dynamic and multi-floor environments. Dynamic in our context refers to the effects of people and device heterogeneity. DIPS can achieve 98% and 92% positioning accuracy for floor and room positioning, and it achieves 1.2 m for point positioning error. RSS certainty enhanced the positioning accuracy for floor and room for different mobile devices by 11% and 9%. Then by considering the peoples’ presence effect, the error is reduced by 0.2 m. In comparison with other works, DIPS achieves better positioning without extra devices.

  14. Common cause analysis of the TREAT upgrade reactor protection system

    Energy Technology Data Exchange (ETDEWEB)

    Page, R.J.; Kamis, G.J.; Marbach, R.A.; Mueller, C.J.

    1984-09-01

    A triply redundant reactor scram system (RSS) has been designed for the upgraded TREAT facility. The independent failures reliability goal for the RSS is <10/sup -9/ failures per demand. An independent failures analysis indicated that this goal would be met. In addition, however, recognizing that in heavily redundant systems common-cause failures dominate, a common cause analysis of the TREAT upgrade RSS was done. The objective was to identify those common-cause initiators which could affect the functioning of the RSS, and to subsequently modify the design of the RSS so that the effect was minimized. A number of common-cause initiators were identified which were capable of defeating the triple redundancy feature of the reactor scram system. By means of a systematic analysis of the effect these initiators could have on the system, it was possible to identify seven necessary design and procedural modifications that would greatly reduce the probability of the reactor being run while the RSS was in a faulted condition.

  15. A New Profile Learning Model for Recommendation System based on Machine Learning Technique

    Directory of Open Access Journals (Sweden)

    Shereen H. Ali

    2016-03-01

    Full Text Available Recommender systems (RSs have been used to successfully address the information overload problem by providing personalized and targeted recommendations to the end users. RSs are software tools and techniques providing suggestions for items to be of use to a user, hence, they typically apply techniques and methodologies from Data Mining. The main contribution of this paper is to introduce a new user profile learning model to promote the recommendation accuracy of vertical recommendation systems. The proposed profile learning model employs the vertical classifier that has been used in multi classification module of the Intelligent Adaptive Vertical Recommendation (IAVR system to discover the user’s area of interest, and then build the user’s profile accordingly. Experimental results have proven the effectiveness of the proposed profile learning model, which accordingly will promote the recommendation accuracy.

  16. Is a Multi-Hop Relay Scheme Gainful in an IEEE 802.22-Based Cognitive Radio System?

    Science.gov (United States)

    Shin, Jungchae; Lee, Dong-Kyu; Cho, Ho-Shin

    In this paper, we formulate a plan to operate multi-hop relays in IEEE 802.22-based cognitive radio (CR) systems and evaluate system performance to consider the propriety of a multi-hop relay scheme in CR systems. A centralized radio resource management and a simple deployment of relay stations (RSs) are assessed to make relay operations feasible under CR conditions. Simulation results show that the proposed multi-hop relay scheme significantly increases system throughput compared to a no-relay CR system as the incumbent user (IU) traffic gets heavier. Furthermore, the optimal number of hops can be determined given the traffic conditions.

  17. Nonlinear Optimization-Based Device-Free Localization with Outlier Link Rejection

    Directory of Open Access Journals (Sweden)

    Wendong Xiao

    2015-04-01

    Full Text Available Device-free localization (DFL is an emerging wireless technique for estimating the location of target that does not have any attached electronic device. It has found extensive use in Smart City applications such as healthcare at home and hospitals, location-based services at smart spaces, city emergency response and infrastructure security. In DFL, wireless devices are used as sensors that can sense the target by transmitting and receiving wireless signals collaboratively. Many DFL systems are implemented based on received signal strength (RSS measurements and the location of the target is estimated by detecting the changes of the RSS measurements of the wireless links. Due to the uncertainty of the wireless channel, certain links may be seriously polluted and result in erroneous detection. In this paper, we propose a novel nonlinear optimization approach with outlier link rejection (NOOLR for RSS-based DFL. It consists of three key strategies, including: (1 affected link identification by differential RSS detection; (2 outlier link rejection via geometrical positional relationship among links; (3 target location estimation by formulating and solving a nonlinear optimization problem. Experimental results demonstrate that NOOLR is robust to the fluctuation of the wireless signals with superior localization accuracy compared with the existing Radio Tomographic Imaging (RTI approach.

  18. BOREAS RSS-20 POLDER C-130 Measurements of Surface BRDF

    Science.gov (United States)

    Leroy, Marc; Hall, Forrest G. (Editor); Nickerson, Jaime (Editor); Smith, David E. (Technical Monitor)

    2000-01-01

    This Boreal Ecosystem-Atmosphere Study (BOREAS) Remote Sensing Science (RSS)-20 data set contains measurements of surface bidirectional reflectance distribution function (BRDF) made by the polarization and Directionality of Earth reflectances (POLDER) instrument over several surface types (pine, spruce, fen) of the BOREAS southern study area (SSA) during the 1994 intensive field campaigns (IFCs). Single-point BRDF values were acquired either from the NASA Ames Research Center (ARC) C-130 aircraft or from a NASA Wallops Flight Facility (WFF) helicopter. A related data set collected from the helicopter platform is available as is POLDER imagery acquired from the C-130. The data are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884) or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

  19. Karakteristik karet ebonit yang dibuat dengan berbagai variasi rasio RSS I/Riklim dan jumlah belerang

    Directory of Open Access Journals (Sweden)

    Penny Setyowati

    2004-07-01

    Full Text Available The aim of the research was to study the influence of utilization of sulphur and reclaim rubber on the characteristics of ebonite rubber, and also to determine the optimum utilization of reclaim rubber and sulphur which yield good physical properties. Ebonite rubber was made by special natural rubber of RSS I (Ribbed Smoke Sheet I mixed with reclaimed rubber at ratio 80/20, 70/30 and 60/40 part hundred rubber/part hundred rubber (phr/phr and utilization of sulphur 30, 40, and 50 phr and also additives respectively. Mixing was done by using open mill, and vulcanization was conducted at early temperature 1200C for 2 hours, and it was continued by post curing at temperature 1500C for 2 hours. The physical properties such as tensile strength, elongation at break, D shore hardness, and izod impact of ebonite rubber vulcanized were determined. The result indicated that characteristics of ebonite rubber was significantly influenced by the amount of added sulphur and 40 phr reclaim rubber or at ratio of RSS I to reclaim rubber 60 to 40 phr/phr. However, the physical properties of ebonite rubber was able to meet the standard quality of group 2 regarding to Classification Hard Rubber issued by ASTM D 2135

  20. An approach to the verification of a fault-tolerant, computer-based reactor safety system: A case study using automated reasoning: Volume 1: Interim report

    International Nuclear Information System (INIS)

    Chisholm, G.H.; Kljaich, J.; Smith, B.T.; Wojcik, A.S.

    1987-01-01

    The purpose of this project is to explore the feasibility of automating the verification process for computer systems. The intent is to demonstrate that both the software and hardware that comprise the system meet specified availability and reliability criteria, that is, total design analysis. The approach to automation is based upon the use of Automated Reasoning Software developed at Argonne National Laboratory. This approach is herein referred to as formal analysis and is based on previous work on the formal verification of digital hardware designs. Formal analysis represents a rigorous evaluation which is appropriate for system acceptance in critical applications, such as a Reactor Safety System (RSS). This report describes a formal analysis technique in the context of a case study, that is, demonstrates the feasibility of applying formal analysis via application. The case study described is based on the Reactor Safety System (RSS) for the Experimental Breeder Reactor-II (EBR-II). This is a system where high reliability and availability are tantamount to safety. The conceptual design for this case study incorporates a Fault-Tolerant Processor (FTP) for the computer environment. An FTP is a computer which has the ability to produce correct results even in the presence of any single fault. This technology was selected as it provides a computer-based equivalent to the traditional analog based RSSs. This provides a more conservative design constraint than that imposed by the IEEE Standard, Criteria For Protection Systems For Nuclear Power Generating Stations (ANSI N42.7-1972)

  1. Indoor location system based on discriminant-adaptive neural network in IEEE 802.11 environments.

    Science.gov (United States)

    Fang, Shih-Hau; Lin, Tsung-Nan

    2008-11-01

    This brief paper presents a novel localization algorithm, named discriminant-adaptive neural network (DANN), which takes the received signal strength (RSS) from the access points (APs) as inputs to infer the client position in the wireless local area network (LAN) environment. We extract the useful information into discriminative components (DCs) for network learning. The nonlinear relationship between RSS and the position is then accurately constructed by incrementally inserting the DCs and recursively updating the weightings in the network until no further improvement is required. Our localization system is developed in a real-world wireless LAN WLAN environment, where the realistic RSS measurement is collected. We implement the traditional approaches on the same test bed, including weighted kappa-nearest neighbor (WKNN), maximum likelihood (ML), and multilayer perceptron (MLP), and compare the results. The experimental results indicate that the proposed algorithm is much higher in accuracy compared with other examined techniques. The improvement can be attributed to that only the useful information is efficiently extracted for positioning while the redundant information is regarded as noise and discarded. Finally, the analysis shows that our network intelligently accomplishes learning while the inserted DCs provide sufficient information.

  2. Target Tracking with Sensor Navigation Using Coupled RSS and AoA Measurements

    Directory of Open Access Journals (Sweden)

    Slavisa Tomic

    2017-11-01

    Full Text Available This work addresses the problem of tracking a signal-emitting mobile target in wireless sensor networks (WSNs with navigated mobile sensors. The sensors are properly equipped to acquire received signal strength (RSS and angle of arrival (AoA measurements from the received signal, while the target transmit power is assumed not known. We start by showing how to linearize the highly non-linear measurement model. Then, by employing a Bayesian approach, we combine the linearized observation model with prior knowledge extracted from the state transition model. Based on the maximum a posteriori (MAP principle and the Kalman filtering (KF framework, we propose new MAP and KF algorithms, respectively. We also propose a simple and efficient mobile sensor navigation procedure, which allows us to further enhance the estimation accuracy of our algorithms with a reduced number of sensors. Model flaws, which result in imperfect knowledge about the path loss exponent (PLE and the true mobile sensors’ locations, are taken into consideration. We have carried out an extensive simulation study, and our results confirm the superiority of the proposed algorithms, as well as the effectiveness of the proposed navigation routine.

  3. Review of the treat upgrade reactor scram system reliability analysis

    International Nuclear Information System (INIS)

    Montague, D.F.; Fussell, J.B.; Krois, P.A.; Morelock, T.C.; Knee, H.E.; Manning, J.J.; Haas, P.M.; West, K.W.

    1984-10-01

    In order to resolve some key LMFBR safety issues, ANL personnel are modifying the TREAT reactor to handle much larger experiments. As a result of these modifications, the upgraded Treat reactor will not always operate in a self-limited mode. During certain experiments in the upgraded TREAT reactor, it is possible that the fuel could be damaged by overheating if, once the computer systems fail, the reactor scram system (RSS) fails on demand. To help ensure that the upgraded TREAT reactor is shut down when required, ANL personnel have designed a triply redundant RSS for the facility. The RSS is designed to meet three reliability goals: (1) a loss of capability failure probability of 10 -9 /demand (independent failures only); (2) an inadvertent shutdown probability of 10 -3 /experiment; and (3) protection agaist any known potential common cause failures. According to ANL's reliability analysis of the RSS, this system substantially meets these goals

  4. Engineered and Administrative Safety Systems for the Control of Prompt Radiation Hazards at Accelerator Facilities

    International Nuclear Information System (INIS)

    Liu, James C.; SLAC; Vylet, Vashek; Walker, Lawrence S.

    2007-01-01

    The ANSI N43.1 Standard, currently in revision (ANSI 2007), sets forth the requirements for accelerator facilities to provide adequate protection for the workers, the public and the environment from the hazards of ionizing radiation produced during and from accelerator operations. The Standard also recommends good practices that, when followed, provide a level of radiation protection consistent with those established for the accelerator communities. The N43.1 Standard is suitable for all accelerator facilities (using electron, positron, proton, or ion particle beams) capable of producing radiation, subject to federal or state regulations. The requirements (see word 'shall') and recommended practices (see word 'should') are prescribed in a graded approach that are commensurate with the complexity and hazard levels of the accelerator facility. Chapters 4, 5 and 6 of the N43.1 Standard address specially the Radiation Safety System (RSS), both engineered and administrative systems, to mitigate and control the prompt radiation hazards from accelerator operations. The RSS includes the Access Control System (ACS) and Radiation Control System (RCS). The main requirements and recommendations of the N43.1 Standard regarding the management, technical and operational aspects of the RSS are described and condensed in this report. Clearly some aspects of the RSS policies and practices at different facilities may differ in order to meet the practical needs for field implementation. A previous report (Liu et al. 2001a), which reviews and summarizes the RSS at five North American high-energy accelerator facilities, as well as the RSS references for the 5 labs (Drozdoff 2001; Gallegos 1996; Ipe and Liu 1992; Liu 1999; Liu 2001b; Rokni 1996; TJNAF 1994; Yotam et al. 1991), can be consulted for the actual RSS implementation at various laboratories. A comprehensive report describing the RSS at the Stanford Linear Accelerator Center (SLAC 2006) can also serve as a reference

  5. Bayesian-based localization in inhomogeneous transmission media

    DEFF Research Database (Denmark)

    Nadimi, E. S.; Blanes-Vidal, V.; Johansen, P. M.

    2013-01-01

    In this paper, we propose a novel robust probabilistic approach based on the Bayesian inference using received-signal-strength (RSS) measurements with varying path-loss exponent. We derived the probability density function (pdf) of the distance between any two sensors in the network with heteroge......In this paper, we propose a novel robust probabilistic approach based on the Bayesian inference using received-signal-strength (RSS) measurements with varying path-loss exponent. We derived the probability density function (pdf) of the distance between any two sensors in the network...... with heterogeneous transmission medium as a function of the given RSS measurements and the characteristics of the heterogeneous medium. The results of this study show that the localization mean square error (MSE) of the Bayesian-based method outperformed all other existing localization approaches. © 2013 ACM....

  6. Location based services

    OpenAIRE

    Doan, Cong Nam

    2015-01-01

    Mobile devices (tablets, smart phones, laptops) are proving themselves to be the main means of accessing information of the future. The embodiment of Recommender Systems (RSs) into mobile environments, as a matter of fact, has come about to serve as a way to solve the nuisances of data overwhelming. RSs' main advantage is their ability to allow users to find useful information according to the users' preferences and location. Even though they are not free of shortcoming such as the limitation...

  7. Hydrogen Sulfide Sensing through Reactive Sulfur Species (RSS) and Nitroxyl (HNO) in Enterococcus faecalis.

    Science.gov (United States)

    Shen, Jiangchuan; Walsh, Brenna J C; Flores-Mireles, Ana Lidia; Peng, Hui; Zhang, Yifan; Zhang, Yixiang; Trinidad, Jonathan C; Hultgren, Scott J; Giedroc, David P

    2018-05-17

    Recent studies of hydrogen sulfide (H 2 S) signaling implicate low molecular weight (LMW) thiol persulfides and other reactive sulfur species (RSS) as signaling effectors. Here, we show that a CstR protein from the human pathogen Enterococcus faecalis ( E. faecalis), previously identified in Staphylococcus aureus ( S. aureus), is an RSS-sensing repressor that transcriptionally regulates a cst-like operon in response to both exogenous sulfide stress and Angeli's salt, a precursor of nitroxyl (HNO). E. faecalis CstR reacts with coenzyme A persulfide (CoASSH) to form interprotomer disulfide and trisulfide bridges between C32 and C61', which negatively regulate DNA binding to a consensus CstR DNA operator. A Δ cstR strain exhibits deficiency in catheter colonization in a catheter-associated urinary tract infection (CAUTI) mouse model, suggesting sulfide regulation and homeostasis is critical for pathogenicity. Cellular polysulfide metabolite profiling of sodium sulfide-stressed E. faecalis confirms an increase in both inorganic polysulfides and LMW thiols and persulfides sensed by CstR. The cst-like operon encodes two authentic thiosulfate sulfurtransferases and an enzyme we characterize here as an NADH and FAD-dependent coenzyme A (CoA) persulfide reductase (CoAPR) that harbors an N-terminal CoA disulfide reductase (CDR) domain and a C-terminal rhodanese homology domain (RHD). Both cysteines in the CDR (C42) and RHD (C508) domains are required for CoAPR activity and complementation of a sulfide-induced growth phenotype of a S. aureus strain lacking cstB, encoding a nonheme Fe II persulfide dioxygenase. We propose that S. aureus CstB and E. faecalis CoAPR employ orthogonal chemistries to lower CoASSH that accumulates under conditions of cellular sulfide toxicity and signaling.

  8. Stress factors for the deformation systems of zirconium under multiaxial stress

    International Nuclear Information System (INIS)

    Hobson, D.O.

    1976-01-01

    Calculation of the resolved shear stresses (rss) that act on various deformation systems in metals and, in particular, the determination of those systems subjected to the highest rss by a given set of multiaxial stresses is of importance in the study of texture development, yielding and plastic flow. This study examines the geometrical influences of any stress state on the deformation modes of zirconium. One slip mode and three twinning modes, comprising twenty-one deformation systems, are considered. Stress factors computed for these systems are shown on a coordinate system that allows specimen orientation, most highly stressed deformation system, and stress factor to be shown without ambiguity. The information in this report allows the determination of the rss that results from any multiaxial stress state; this information also allows the prediction of the deformation modes that might operate for any specimen orientation in that strss state

  9. Proceedings of workshop on reactor shutdown system

    International Nuclear Information System (INIS)

    1997-03-01

    India has gained considerable experience in design, development, construction and operation of research and power reactors during the last four decades. Reactor shutdown system (RSS) is the most important engineered safety system of any reactor. A lot of technological developments have taken place to improve the reactor shutdown systems, particularly with advancement in reliability analysis and instrumentation and control. If the reactor is not shutdown, the fuel may melt, releasing radioactivity and possibly reactivity addition as in the case of Fast Breeder Reactor (FBR). Apart from radiological safety consequences, large investment has to be written off. The function of the RSS is to stop fission chain reaction and prevent breach of fuel. The design of RSS is multidisciplinary. It requires reactor physics analysis, design of absorber rods, drive mechanisms, safety logic to order shutdown and instrumentation to detect unsafe conditions. High reliability is essential and this requires two independent shutdown systems. This book contains the proceedings of the workshop on reactor shutdown system and papers relevant to INIS are indexed separately

  10. Machine-Learning-Based Future Received Signal Strength Prediction Using Depth Images for mmWave Communications

    OpenAIRE

    Okamoto, Hironao; Nishio, Takayuki; Nakashima, Kota; Koda, Yusuke; Yamamoto, Koji; Morikura, Masahiro; Asai, Yusuke; Miyatake, Ryo

    2018-01-01

    This paper discusses a machine-learning (ML)-based future received signal strength (RSS) prediction scheme using depth camera images for millimeter-wave (mmWave) networks. The scheme provides the future RSS prediction of any mmWave links within the camera's view, including links where nodes are not transmitting frames. This enables network controllers to conduct network operations before line-of-sight path blockages degrade the RSS. Using the ML techniques, the prediction scheme automatically...

  11. On Barbs and Labels in Reactive Systems

    Directory of Open Access Journals (Sweden)

    Filippo Bonchi

    2010-02-01

    Full Text Available Reactive systems (RSs represent a meta-framework aimed at deriving behavioral congruences for those computational formalisms whose operational semantics is provided by reduction rules. RSs proved a flexible specification device, yet so far most of the efforts dealing with their behavioural semantics focused on idem pushouts (IPOs and saturated (also known as dynamic bisimulations. In this paper we introduce a novel, intermediate behavioural equivalence: L-bisimilarity, which is able to recast both its IPO and saturated counterparts. The equivalence is parametric with respect to a set L of RSs labels, and it is shown that under mild conditions on L it is indeed a congruence. Furthermore, L-bisimilarity can also recast the notion of barbed semantics for RSs, proposed by the same authors in a previous paper. In order to provide a suitable test-bed, we instantiate our proposal by addressing the semantics of (asynchronous CCS and of the calculus of mobile ambients.

  12. Canoe: An Autonomous Infrastructure-Free Indoor Navigation System

    Directory of Open Access Journals (Sweden)

    Kai Dong

    2017-04-01

    Full Text Available The development of the Internet of Things (IoT has accelerated research in indoor navigation systems, a majority of which rely on adequate wireless signals and sources. Nonetheless, deploying such a system requires periodic site-survey, which is time consuming and labor intensive. To address this issue, in this paper we present Canoe, an indoor navigation system that considers shopping mall scenarios. In our system, we do not assume any prior knowledge, such as floor-plan or the shop locations, access point placement or power settings, historical RSS measurements or fingerprints, etc. Instead, Canoe requires only that the shop owners collect and publish RSS values at the entrances of their shops and can direct a consumer to any of these shops by comparing the observed RSS values. The locations of the consumers and the shops are estimated using maximum likelihood estimation. In doing this, the direction of the target shop relative to the current orientation of the consumer can be precisely computed, such that the direction that a consumer should move can be determined. We have conducted extensive simulations using a real-world dataset. Our experiments in a real shopping mall demonstrate that if 50% of the shops publish their RSS values, Canoe can precisely navigate a consumer within 30 s, with an error rate below 9%.

  13. Escala de Autoestima de Rosenberg (EAR: validade fatorial e consistência interna Rosenberg Self-Esteem Scale (RSS: factorial validity and internal consistency

    Directory of Open Access Journals (Sweden)

    Juliana Burges Sbicigo

    2010-12-01

    Full Text Available O objetivo deste estudo foi investigar as propriedades psicométricas da Escala de Autoestima de Rosenberg (EAR para adolescentes. Participaram 4.757 adolescentes, com idades entre 14 e 18 anos (M=15,77; DP=1,22, de nove cidades brasileiras. Os participantes responderam a uma versão da EAR adaptada para o Brasil. A análise fatorial exploratória apontou uma estrutura bidimensional, com 51.4% da variância explicada, que foi sustentada pela análise fatorial confirmatória. As análises de consistência interna realizadas por meio do coeficiente alfa de Cronbach, confiabilidade composta e variância extraída indicaram bons valores de fidedignidade. Diferenças nos escores de autoestima em função do sexo e da idade não foram encontradas. Conclui-se que a EAR apresenta qualidades psicométricas satisfatórias, mostrando-se um instrumento confiável para medir autoestima em adolescentes brasileiros.The aim of this study was to investigate the psychometrics properties of the Rosenberg Self-Esteem Scale (RSS for adolescents. The sample was composed of 4.757 adolescents, with ages between 14 and 18 years old (M=15.77; SD=1.22 in nine Brazilian cities. Participants responded to an adapted version of the RSS for Brazil. Exploratory factorial analysis showed a bidimensional structure, with 51.4% of explained variance. This result was supported by confirmatory factor analysis. The internal consistency analysis by Cronbach alpha coefficient, composite reliability and extracted variance indicated good reliability. Differences in self-esteem for gender and age were not found. These findings show that RSS has satisfactory psychometric qualities and it's a reliable instrument to assess self-esteem in Brazilian adolescents.

  14. Prediction of improvement in skin fibrosis in diffuse cutaneous systemic sclerosis: a EUSTAR analysis.

    Science.gov (United States)

    Dobrota, Rucsandra; Maurer, Britta; Graf, Nicole; Jordan, Suzana; Mihai, Carina; Kowal-Bielecka, Otylia; Allanore, Yannick; Distler, Oliver

    2016-10-01

    Improvement of skin fibrosis is part of the natural course of diffuse cutaneous systemic sclerosis (dcSSc). Recognising those patients most likely to improve could help tailoring clinical management and cohort enrichment for clinical trials. In this study, we aimed to identify predictors for improvement of skin fibrosis in patients with dcSSc. We performed a longitudinal analysis of the European Scleroderma Trials And Research (EUSTAR) registry including patients with dcSSc, fulfilling American College of Rheumatology criteria, baseline modified Rodnan skin score (mRSS) ≥7 and follow-up mRSS at 12±2 months. The primary outcome was skin improvement (decrease in mRSS of >5 points and ≥25%) at 1 year follow-up. A respective increase in mRSS was considered progression. Candidate predictors for skin improvement were selected by expert opinion and logistic regression with bootstrap validation was applied. From the 919 patients included, 218 (24%) improved and 95 (10%) progressed. Eleven candidate predictors for skin improvement were analysed. The final model identified high baseline mRSS and absence of tendon friction rubs as independent predictors of skin improvement. The baseline mRSS was the strongest predictor of skin improvement, independent of disease duration. An upper threshold between 18 and 25 performed best in enriching for progressors over regressors. Patients with advanced skin fibrosis at baseline and absence of tendon friction rubs are more likely to regress in the next year than patients with milder skin fibrosis. These evidence-based data can be implemented in clinical trial design to minimise the inclusion of patients who would regress under standard of care. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  15. BOREAS RSS-8 BIOME-BGC SSA Simulation of Annual Water and Carbon Fluxes

    Science.gov (United States)

    Hall, Forrest G. (Editor); Nickeson, Jaime (Editor); Kimball, John

    2000-01-01

    The BOREAS RSS-8 team performed research to evaluate the effect of seasonal weather and landcover heterogeneity on boreal forest regional water and carbon fluxes using a process-level ecosystem model, BIOME-BGC, coupled with remote sensing-derived parameter maps of key state variables. This data set contains derived maps of landcover type and crown and stem biomass as model inputs to determine annual evapotranspiration, gross primary production, autotrophic respiration, and net primary productivity within the BOREAS SSA-MSA, at a 30-m spatial resolution. Model runs were conducted over a 3-year period from 1994-1996; images are provided for each of those years. The data are stored in binary image format. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

  16. Radiation protection system installation for the accelerator production of tritium/low energy demonstration accelerator project (APT/LEDA)

    CERN Document Server

    Wilmarth, J E; Tomei, T L

    2000-01-01

    The APT/LEDA personnel radiation protection system installation was accomplished using a flexible, modular proven system which satisfied regulatory orders, project design criteria, operational modes, and facility requirements. The goal of providing exclusion and safe access of personnel to areas where prompt radiation in the LEDA facility is produced was achieved with the installation of a DOE-approved Personnel Access Control System (PACS). To satisfy the facility configuration design, the PACS, a major component of the overall radiation safety system, conveniently provided five independent areas of personnel access control. Because of its flexibility and adaptability the Los-Alamos Neutron- Science-Center-(LANSCE)-designed Radiation Security System (RSS) was efficiently configured to provide the desired operational modes and satisfy the APT/LEDA project design criteria. The Backbone Beam Enable (BBE) system based on the LANSCE RSS provided the accelerator beam control functions with redundant, hardwired, ta...

  17. A Two-Pass Exact Algorithm for Selection on Parallel Disk Systems.

    Science.gov (United States)

    Mi, Tian; Rajasekaran, Sanguthevar

    2013-07-01

    Numerous OLAP queries process selection operations of "top N", median, "top 5%", in data warehousing applications. Selection is a well-studied problem that has numerous applications in the management of data and databases since, typically, any complex data query can be reduced to a series of basic operations such as sorting and selection. The parallel selection has also become an important fundamental operation, especially after parallel databases were introduced. In this paper, we present a deterministic algorithm Recursive Sampling Selection (RSS) to solve the exact out-of-core selection problem, which we show needs no more than (2 + ε ) passes ( ε being a very small fraction). We have compared our RSS algorithm with two other algorithms in the literature, namely, the Deterministic Sampling Selection and QuickSelect on the Parallel Disks Systems. Our analysis shows that DSS is a (2 + ε )-pass algorithm when the total number of input elements N is a polynomial in the memory size M (i.e., N = M c for some constant c ). While, our proposed algorithm RSS runs in (2 + ε ) passes without any assumptions. Experimental results indicate that both RSS and DSS outperform QuickSelect on the Parallel Disks Systems. Especially, the proposed algorithm RSS is more scalable and robust to handle big data when the input size is far greater than the core memory size, including the case of N ≫ M c .

  18. A disseminação seletiva da informação e a tecnologia RSS nas bibliotecas de Tribunais em Brasília

    Directory of Open Access Journals (Sweden)

    Thiago Gomes Eirão

    2015-09-01

    Full Text Available A pesquisa teve como objetivo verificar a utilização do serviço de disseminação seletiva da informação (DSI e a tecnologia RSS em bibliotecas de Tribunais em Brasília. Esse estudo foi proposto para identificar como os serviços de referência de tais bibliotecas veem a validade do serviço de disseminação seletiva e mais especificamente a tecnologia RSS como instrumentos para o desenvolvimento de novos produtos e serviços de informação com o foco nas necessidades do usuário. Ao todo foram visitadas seis instituições do poder Judiciário que possuem sede em Brasília. A amostra dos respondentes foi composta por doze profissionais formados em Biblioteconomia, que atuavam no serviço de referência dos respectivos órgãos. A técnica de pesquisa utilizada foi a entrevista semiaberta. Para obtenção das respostas foi utilizado um roteiro de perguntas que permitia ao entrevistador aprofundar as questões a partir das respostas concedidas pelos entrevistados. Os resultados obtidos demonstraram que os profissionais ainda veem utilidade do serviço de DSI, apesar de apenas duas das bibliotecas visitadas o utilizarem. Também foi possível verificar que os profissionais vislumbram a utilização da tecnologia RSS nos serviços de referência, apesar de nenhuma biblioteca visitada já ter pensado na utilização da tecnologia e os sites dessas bibliotecas ainda possuírem uma baixa disponibilização de serviços e utilização.

  19. PRIMAL: Page Rank-Based Indoor Mapping and Localization Using Gene-Sequenced Unlabeled WLAN Received Signal Strength

    Directory of Open Access Journals (Sweden)

    Mu Zhou

    2015-09-01

    Full Text Available Due to the wide deployment of wireless local area networks (WLAN, received signal strength (RSS-based indoor WLAN localization has attracted considerable attention in both academia and industry. In this paper, we propose a novel page rank-based indoor mapping and localization (PRIMAL by using the gene-sequenced unlabeled WLAN RSS for simultaneous localization and mapping (SLAM. Specifically, first of all, based on the observation of the motion patterns of the people in the target environment, we use the Allen logic to construct the mobility graph to characterize the connectivity among different areas of interest. Second, the concept of gene sequencing is utilized to assemble the sporadically-collected RSS sequences into a signal graph based on the transition relations among different RSS sequences. Third, we apply the graph drawing approach to exhibit both the mobility graph and signal graph in a more readable manner. Finally, the page rank (PR algorithm is proposed to construct the mapping from the signal graph into the mobility graph. The experimental results show that the proposed approach achieves satisfactory localization accuracy and meanwhile avoids the intensive time and labor cost involved in the conventional location fingerprinting-based indoor WLAN localization.

  20. PRIMAL: Page Rank-Based Indoor Mapping and Localization Using Gene-Sequenced Unlabeled WLAN Received Signal Strength.

    Science.gov (United States)

    Zhou, Mu; Zhang, Qiao; Xu, Kunjie; Tian, Zengshan; Wang, Yanmeng; He, Wei

    2015-09-25

    Due to the wide deployment of wireless local area networks (WLAN), received signal strength (RSS)-based indoor WLAN localization has attracted considerable attention in both academia and industry. In this paper, we propose a novel page rank-based indoor mapping and localization (PRIMAL) by using the gene-sequenced unlabeled WLAN RSS for simultaneous localization and mapping (SLAM). Specifically, first of all, based on the observation of the motion patterns of the people in the target environment, we use the Allen logic to construct the mobility graph to characterize the connectivity among different areas of interest. Second, the concept of gene sequencing is utilized to assemble the sporadically-collected RSS sequences into a signal graph based on the transition relations among different RSS sequences. Third, we apply the graph drawing approach to exhibit both the mobility graph and signal graph in a more readable manner. Finally, the page rank (PR) algorithm is proposed to construct the mapping from the signal graph into the mobility graph. The experimental results show that the proposed approach achieves satisfactory localization accuracy and meanwhile avoids the intensive time and labor cost involved in the conventional location fingerprinting-based indoor WLAN localization.

  1. An RFID Indoor Positioning Algorithm Based on Bayesian Probability and K-Nearest Neighbor.

    Science.gov (United States)

    Xu, He; Ding, Ye; Li, Peng; Wang, Ruchuan; Li, Yizhu

    2017-08-05

    The Global Positioning System (GPS) is widely used in outdoor environmental positioning. However, GPS cannot support indoor positioning because there is no signal for positioning in an indoor environment. Nowadays, there are many situations which require indoor positioning, such as searching for a book in a library, looking for luggage in an airport, emergence navigation for fire alarms, robot location, etc. Many technologies, such as ultrasonic, sensors, Bluetooth, WiFi, magnetic field, Radio Frequency Identification (RFID), etc., are used to perform indoor positioning. Compared with other technologies, RFID used in indoor positioning is more cost and energy efficient. The Traditional RFID indoor positioning algorithm LANDMARC utilizes a Received Signal Strength (RSS) indicator to track objects. However, the RSS value is easily affected by environmental noise and other interference. In this paper, our purpose is to reduce the location fluctuation and error caused by multipath and environmental interference in LANDMARC. We propose a novel indoor positioning algorithm based on Bayesian probability and K -Nearest Neighbor (BKNN). The experimental results show that the Gaussian filter can filter some abnormal RSS values. The proposed BKNN algorithm has the smallest location error compared with the Gaussian-based algorithm, LANDMARC and an improved KNN algorithm. The average error in location estimation is about 15 cm using our method.

  2. A Real-Time Location-Based Services System Using WiFi Fingerprinting Algorithm for Safety Risk Assessment of Workers in Tunnels

    Directory of Open Access Journals (Sweden)

    Peng Lin

    2014-01-01

    Full Text Available This paper investigates the feasibility of a real-time tunnel location-based services (LBS system to provide workers’ safety protection and various services in concrete dam site. In this study, received signal strength- (RSS- based location using fingerprinting algorithm and artificial neural network (ANN risk assessment is employed for position analysis. This tunnel LBS system achieves an online, real-time, intelligent tracking identification feature, and the on-site running system has many functions such as worker emergency call, track history, and location query. Based on ANN with a strong nonlinear mapping, and large-scale parallel processing capabilities, proposed LBS system is effective to evaluate the risk management on worker safety. The field implementation shows that the proposed location algorithm is reliable and accurate (3 to 5 meters enough for providing real-time positioning service. The proposed LBS system is demonstrated and firstly applied to the second largest hydropower project in the world, to track workers on tunnel site and assure their safety. The results show that the system is simple and easily deployed.

  3. Advanced Pedestrian Positioning System to Smartphones and Smartwatches

    Directory of Open Access Journals (Sweden)

    Alejandro Correa

    2016-11-01

    Full Text Available In recent years, there has been an increasing interest in the development of pedestrian navigation systems for satellite-denied scenarios. The popularization of smartphones and smartwatches is an interesting opportunity for reducing the infrastructure cost of the positioning systems. Nowadays, smartphones include inertial sensors that can be used in pedestrian dead-reckoning (PDR algorithms for the estimation of the user’s position. Both smartphones and smartwatches include WiFi capabilities allowing the computation of the received signal strength (RSS. We develop a new method for the combination of RSS measurements from two different receivers using a Gaussian mixture model. We also analyze the implication of using a WiFi network designed for communication purposes in an indoor positioning system when the designer cannot control the network configuration. In this work, we design a hybrid positioning system that combines inertial measurements, from low-cost inertial sensors embedded in a smartphone, with RSS measurements through an extended Kalman filter. The system has been validated in a real scenario, and results show that our system improves the positioning accuracy of the PDR system thanks to the use of two WiFi receivers. The designed system obtains an accuracy up to 1.4 m in a scenario of 6000 m 2 .

  4. Adaptive algorithm for mobile user positioning based on environment estimation

    Directory of Open Access Journals (Sweden)

    Grujović Darko

    2014-01-01

    Full Text Available This paper analyzes the challenges to realize an infrastructure independent and a low-cost positioning method in cellular networks based on RSS (Received Signal Strength parameter, auxiliary timing parameter and environment estimation. The proposed algorithm has been evaluated using field measurements collected from GSM (Global System for Mobile Communications network, but it is technology independent and can be applied in UMTS (Universal Mobile Telecommunication Systems and LTE (Long-Term Evolution networks, also.

  5. An RFID Indoor Positioning Algorithm Based on Bayesian Probability and K-Nearest Neighbor

    Directory of Open Access Journals (Sweden)

    He Xu

    2017-08-01

    Full Text Available The Global Positioning System (GPS is widely used in outdoor environmental positioning. However, GPS cannot support indoor positioning because there is no signal for positioning in an indoor environment. Nowadays, there are many situations which require indoor positioning, such as searching for a book in a library, looking for luggage in an airport, emergence navigation for fire alarms, robot location, etc. Many technologies, such as ultrasonic, sensors, Bluetooth, WiFi, magnetic field, Radio Frequency Identification (RFID, etc., are used to perform indoor positioning. Compared with other technologies, RFID used in indoor positioning is more cost and energy efficient. The Traditional RFID indoor positioning algorithm LANDMARC utilizes a Received Signal Strength (RSS indicator to track objects. However, the RSS value is easily affected by environmental noise and other interference. In this paper, our purpose is to reduce the location fluctuation and error caused by multipath and environmental interference in LANDMARC. We propose a novel indoor positioning algorithm based on Bayesian probability and K-Nearest Neighbor (BKNN. The experimental results show that the Gaussian filter can filter some abnormal RSS values. The proposed BKNN algorithm has the smallest location error compared with the Gaussian-based algorithm, LANDMARC and an improved KNN algorithm. The average error in location estimation is about 15 cm using our method.

  6. Coordinate-Based Clustering Method for Indoor Fingerprinting Localization in Dense Cluttered Environments

    Directory of Open Access Journals (Sweden)

    Wen Liu

    2016-12-01

    Full Text Available Indoor positioning technologies has boomed recently because of the growing commercial interest in indoor location-based service (ILBS. Due to the absence of satellite signal in Global Navigation Satellite System (GNSS, various technologies have been proposed for indoor applications. Among them, Wi-Fi fingerprinting has been attracting much interest from researchers because of its pervasive deployment, flexibility and robustness to dense cluttered indoor environments. One challenge, however, is the deployment of Access Points (AP, which would bring a significant influence on the system positioning accuracy. This paper concentrates on WLAN based fingerprinting indoor location by analyzing the AP deployment influence, and studying the advantages of coordinate-based clustering compared to traditional RSS-based clustering. A coordinate-based clustering method for indoor fingerprinting location, named Smallest-Enclosing-Circle-based (SEC, is then proposed aiming at reducing the positioning error lying in the AP deployment and improving robustness to dense cluttered environments. All measurements are conducted in indoor public areas, such as the National Center For the Performing Arts (as Test-bed 1 and the XiDan Joy City (Floors 1 and 2, as Test-bed 2, and results show that SEC clustering algorithm can improve system positioning accuracy by about 32.7% for Test-bed 1, 71.7% for Test-bed 2 Floor 1 and 73.7% for Test-bed 2 Floor 2 compared with traditional RSS-based clustering algorithms such as K-means.

  7. Coordinate-Based Clustering Method for Indoor Fingerprinting Localization in Dense Cluttered Environments.

    Science.gov (United States)

    Liu, Wen; Fu, Xiao; Deng, Zhongliang

    2016-12-02

    Indoor positioning technologies has boomed recently because of the growing commercial interest in indoor location-based service (ILBS). Due to the absence of satellite signal in Global Navigation Satellite System (GNSS), various technologies have been proposed for indoor applications. Among them, Wi-Fi fingerprinting has been attracting much interest from researchers because of its pervasive deployment, flexibility and robustness to dense cluttered indoor environments. One challenge, however, is the deployment of Access Points (AP), which would bring a significant influence on the system positioning accuracy. This paper concentrates on WLAN based fingerprinting indoor location by analyzing the AP deployment influence, and studying the advantages of coordinate-based clustering compared to traditional RSS-based clustering. A coordinate-based clustering method for indoor fingerprinting location, named Smallest-Enclosing-Circle-based (SEC), is then proposed aiming at reducing the positioning error lying in the AP deployment and improving robustness to dense cluttered environments. All measurements are conducted in indoor public areas, such as the National Center For the Performing Arts (as Test-bed 1) and the XiDan Joy City (Floors 1 and 2, as Test-bed 2), and results show that SEC clustering algorithm can improve system positioning accuracy by about 32.7% for Test-bed 1, 71.7% for Test-bed 2 Floor 1 and 73.7% for Test-bed 2 Floor 2 compared with traditional RSS-based clustering algorithms such as K-means.

  8. Cosimulation of embedded system using RTOS software simulator

    Science.gov (United States)

    Wang, Shihao; Duan, Zhigang; Liu, Mingye

    2003-09-01

    Embedded system design often employs co-simulation to verify system's function; one efficient verification tool of software is Instruction Set Simulator (ISS). As a full functional model of target CPU, ISS interprets instruction of embedded software step by step, which usually is time-consuming since it simulates at low-level. Hence ISS often becomes the bottleneck of co-simulation in a complicated system. In this paper, a new software verification tools, the RTOS software simulator (RSS) was presented. The mechanism of its operation was described in a full details. In RSS method, RTOS API is extended and hardware simulator driver is adopted to deal with data-exchange and synchronism between the two simulators.

  9. Kalman/Map Filtering-Aided Fast Normalized Cross Correlation-Based Wi-Fi Fingerprinting Location Sensing

    Directory of Open Access Journals (Sweden)

    Yongliang Sun

    2013-11-01

    Full Text Available A Kalman/map filtering (KMF-aided fast normalized cross correlation (FNCC-based Wi-Fi fingerprinting location sensing system is proposed in this paper. Compared with conventional neighbor selection algorithms that calculate localization results with received signal strength (RSS mean samples, the proposed FNCC algorithm makes use of all the on-line RSS samples and reference point RSS variations to achieve higher fingerprinting accuracy. The FNCC computes efficiently while maintaining the same accuracy as the basic normalized cross correlation. Additionally, a KMF is also proposed to process fingerprinting localization results. It employs a new map matching algorithm to nonlinearize the linear location prediction process of Kalman filtering (KF that takes advantage of spatial proximities of consecutive localization results. With a calibration model integrated into an indoor map, the map matching algorithm corrects unreasonable prediction locations of the KF according to the building interior structure. Thus, more accurate prediction locations are obtained. Using these locations, the KMF considerably improves fingerprinting algorithm performance. Experimental results demonstrate that the FNCC algorithm with reduced computational complexity outperforms other neighbor selection algorithms and the KMF effectively improves location sensing accuracy by using indoor map information and spatial proximities of consecutive localization results.

  10. Kalman/Map filtering-aided fast normalized cross correlation-based Wi-Fi fingerprinting location sensing.

    Science.gov (United States)

    Sun, Yongliang; Xu, Yubin; Li, Cheng; Ma, Lin

    2013-11-13

    A Kalman/map filtering (KMF)-aided fast normalized cross correlation (FNCC)-based Wi-Fi fingerprinting location sensing system is proposed in this paper. Compared with conventional neighbor selection algorithms that calculate localization results with received signal strength (RSS) mean samples, the proposed FNCC algorithm makes use of all the on-line RSS samples and reference point RSS variations to achieve higher fingerprinting accuracy. The FNCC computes efficiently while maintaining the same accuracy as the basic normalized cross correlation. Additionally, a KMF is also proposed to process fingerprinting localization results. It employs a new map matching algorithm to nonlinearize the linear location prediction process of Kalman filtering (KF) that takes advantage of spatial proximities of consecutive localization results. With a calibration model integrated into an indoor map, the map matching algorithm corrects unreasonable prediction locations of the KF according to the building interior structure. Thus, more accurate prediction locations are obtained. Using these locations, the KMF considerably improves fingerprinting algorithm performance. Experimental results demonstrate that the FNCC algorithm with reduced computational complexity outperforms other neighbor selection algorithms and the KMF effectively improves location sensing accuracy by using indoor map information and spatial proximities of consecutive localization results.

  11. Cluster-based adaptive power control protocol using Hidden Markov Model for Wireless Sensor Networks

    Science.gov (United States)

    Vinutha, C. B.; Nalini, N.; Nagaraja, M.

    2017-06-01

    This paper presents strategies for an efficient and dynamic transmission power control technique, in order to reduce packet drop and hence energy consumption of power-hungry sensor nodes operated in highly non-linear channel conditions of Wireless Sensor Networks. Besides, we also focus to prolong network lifetime and scalability by designing cluster-based network structure. Specifically we consider weight-based clustering approach wherein, minimum significant node is chosen as Cluster Head (CH) which is computed stemmed from the factors distance, remaining residual battery power and received signal strength (RSS). Further, transmission power control schemes to fit into dynamic channel conditions are meticulously implemented using Hidden Markov Model (HMM) where probability transition matrix is formulated based on the observed RSS measurements. Typically, CH estimates initial transmission power of its cluster members (CMs) from RSS using HMM and broadcast this value to its CMs for initialising their power value. Further, if CH finds that there are variations in link quality and RSS of the CMs, it again re-computes and optimises the transmission power level of the nodes using HMM to avoid packet loss due noise interference. We have demonstrated our simulation results to prove that our technique efficiently controls the power levels of sensing nodes to save significant quantity of energy for different sized network.

  12. Adaptive Subframe Partitioning and Efficient Packet Scheduling in OFDMA Cellular System with Fixed Decode-and-Forward Relays

    Science.gov (United States)

    Wang, Liping; Ji, Yusheng; Liu, Fuqiang

    The integration of multihop relays with orthogonal frequency-division multiple access (OFDMA) cellular infrastructures can meet the growing demands for better coverage and higher throughput. Resource allocation in the OFDMA two-hop relay system is more complex than that in the conventional single-hop OFDMA system. With time division between transmissions from the base station (BS) and those from relay stations (RSs), fixed partitioning of the BS subframe and RS subframes can not adapt to various traffic demands. Moreover, single-hop scheduling algorithms can not be used directly in the two-hop system. Therefore, we propose a semi-distributed algorithm called ASP to adjust the length of every subframe adaptively, and suggest two ways to extend single-hop scheduling algorithms into multihop scenarios: link-based and end-to-end approaches. Simulation results indicate that the ASP algorithm increases system utilization and fairness. The max carrier-to-interference ratio (Max C/I) and proportional fairness (PF) scheduling algorithms extended using the end-to-end approach obtain higher throughput than those using the link-based approach, but at the expense of more overhead for information exchange between the BS and RSs. The resource allocation scheme using ASP and end-to-end PF scheduling achieves a tradeoff between system throughput maximization and fairness.

  13. Indoor high precision three-dimensional positioning system based on visible light communication using modified genetic algorithm

    Science.gov (United States)

    Chen, Hao; Guan, Weipeng; Li, Simin; Wu, Yuxiang

    2018-04-01

    To improve the precision of indoor positioning and actualize three-dimensional positioning, a reversed indoor positioning system based on visible light communication (VLC) using genetic algorithm (GA) is proposed. In order to solve the problem of interference between signal sources, CDMA modulation is used. Each light-emitting diode (LED) in the system broadcasts a unique identity (ID) code using CDMA modulation. Receiver receives mixed signal from every LED reference point, by the orthogonality of spreading code in CDMA modulation, ID information and intensity attenuation information from every LED can be obtained. According to positioning principle of received signal strength (RSS), the coordinate of the receiver can be determined. Due to system noise and imperfection of device utilized in the system, distance between receiver and transmitters will deviate from the real value resulting in positioning error. By introducing error correction factors to global parallel search of genetic algorithm, coordinates of the receiver in three-dimensional space can be determined precisely. Both simulation results and experimental results show that in practical application scenarios, the proposed positioning system can realize high precision positioning service.

  14. Mercury- Distributed Metadata Management, Data Discovery and Access System

    Science.gov (United States)

    Palanisamy, Giri; Wilson, Bruce E.; Devarakonda, Ranjeet; Green, James M.

    2007-12-01

    Mercury is a federated metadata harvesting, search and retrieval tool based on both open source and ORNL- developed software. It was originally developed for NASA, and the Mercury development consortium now includes funding from NASA, USGS, and DOE. Mercury supports various metadata standards including XML, Z39.50, FGDC, Dublin-Core, Darwin-Core, EML, and ISO-19115 (under development). Mercury provides a single portal to information contained in disparate data management systems. It collects metadata and key data from contributing project servers distributed around the world and builds a centralized index. The Mercury search interfaces then allow the users to perform simple, fielded, spatial and temporal searches across these metadata sources. This centralized repository of metadata with distributed data sources provides extremely fast search results to the user, while allowing data providers to advertise the availability of their data and maintain complete control and ownership of that data. Mercury supports various projects including: ORNL DAAC, NBII, DADDI, LBA, NARSTO, CDIAC, OCEAN, I3N, IAI, ESIP and ARM. The new Mercury system is based on a Service Oriented Architecture and supports various services such as Thesaurus Service, Gazetteer Web Service and UDDI Directory Services. This system also provides various search services including: RSS, Geo-RSS, OpenSearch, Web Services and Portlets. Other features include: Filtering and dynamic sorting of search results, book-markable search results, save, retrieve, and modify search criteria.

  15. Semantic content-based recommendations using semantic graphs.

    Science.gov (United States)

    Guo, Weisen; Kraines, Steven B

    2010-01-01

    Recommender systems (RSs) can be useful for suggesting items that might be of interest to specific users. Most existing content-based recommendation (CBR) systems are designed to recommend items based on text content, and the items in these systems are usually described with keywords. However, similarity evaluations based on keywords suffer from the ambiguity of natural languages. We present a semantic CBR method that uses Semantic Web technologies to recommend items that are more similar semantically with the items that the user prefers. We use semantic graphs to represent the items and we calculate the similarity scores for each pair of semantic graphs using an inverse graph frequency algorithm. The items having higher similarity scores to the items that are known to be preferred by the user are recommended.

  16. A Risk Prediction Model Based on Lymph-Node Metastasis in Poorly Differentiated-Type Intramucosal Gastric Cancer.

    Directory of Open Access Journals (Sweden)

    Jeung Hui Pyo

    Full Text Available Endoscopic submucosal dissection (ESD for undifferentiated type early gastric cancer is regarded as an investigational treatment. Few studies have tried to identify the risk factors that predict lymph-node metastasis (LNM in intramucosal poorly differentiated adenocarcinomas (PDC. This study was designed to develop a risk scoring system (RSS for predicting LNM in intramucosal PDC.From January 2002 to July 2015, patients diagnosed with mucosa-confined PDC, among those who underwent curative gastrectomy with lymph node dissection were reviewed. A risk model based on independent predicting factors of LNM was developed, and its performance was internally validated using a split sample approach.Overall, LNM was observed in 5.2% (61 of 1169 patients. Four risk factors [Female sex, tumor size ≥ 3.2 cm, muscularis mucosa (M3 invasion, and lymphatic-vascular involvement] were significantly associated with LNM, which were incorporated into the RSS. The area under the receiver operating characteristic curve for predicting LNM after internal validation was 0.69 [95% confidence interval (CI, 0.59-0.79]. A total score of 2 points corresponded to the optimal RSS threshold with a discrimination of 0.75 (95% CI 0.69-0.81. The LNM rates were 1.6% for low risk (<2 points and 8.9% for high-risk (≥2 points patients, with a negative predictive value of 98.6% (95% CI 0.98-1.00.A RSS could be useful in clinical practice to determine which patients with intramucosal PDC have low risk of LNM.

  17. BOREAS RSS-15 SIR-C and Landsat TM Biomass and Landcover Maps of the NSA

    Science.gov (United States)

    Hall, Forrest G. (Editor); Nickeson, Jaime (Editor); Ranson, K. Jon

    2000-01-01

    As part of BOREAS, the RSS-15 team conducted an investigation using SIR-C, X-SAR, and Landsat TM data for estimating total above-ground dry biomass for the SSA and NSA modeling grids and component biomass for the SSA. Relationships of backscatter to total biomass and total biomass to foliage, branch, and bole biomass were used to estimate biomass density across the landscape. The procedure involved image classification with SAR and Landsat TM data and development of simple mapping techniques using combinations of SAR channels. For the SSA, the SIR-C data used were acquired on 06-Oct-1994, and the Landsat TM data used were acquired on 02-Sep-1995. The maps of the NSA were developed from SIR-C data acquired on 13-Apr-1994. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

  18. A Fast Recommender System for Cold User Using Categorized Items

    Directory of Open Access Journals (Sweden)

    Hamid Jazayeriy

    2018-01-01

    Full Text Available In recent years, recommender systems (RS provide a considerable progress to users. RSs reduce the cost of a user’s time in order to reach to desired results faster. The main issue of RSs is the presence of cold users which are less active and their preferences are more difficult to detect. The aim of this study is to provide a new way to improve recall and precision in recommender systems for cold users. According to the available categories of items, prioritization of the proposed items is improved and then presented to the cold user. The obtained results show that in addition to increased speed of processing, recall and precision have an acceptable improvement.

  19. LANSCE personnel access control system (PACS)

    International Nuclear Information System (INIS)

    Sturrock, J.C.; Gallegos, F.R.; Hall, M.J.

    1997-01-01

    The Radiation Security System (RSS) at the Los Alamos Neutron Science Center (LANSCE) provides personnel protection from prompt radiation due to accelerated beam. The Personnel Access Control System (PACS) is a component of the RSS that is designed to prevent personnel access to areas where prompt radiation is a hazard. PACS was designed to replace several older personnel safety systems (PSS) with a single modem unified design. Lessons learned from the operation over the last 20 years were incorporated into a redundant sensor, single-point failure safe, fault tolerant, and tamper-resistant system that prevents access to the beam areas by controlling the access keys and beam stoppers. PACS uses a layered philosophy to the physical and electronic design. The most critical assemblies are battery backed up, relay logic circuits; less critical devices use Programmable Logic Controllers (PLCs) for timing functions and communications. Outside reviewers have reviewed the operational safety of the design. The design philosophy, lessons learned, hardware design, software design, operation, and limitations of the device are described

  20. A Study on the use of Facebook, RSS, Blogs and Twitter (Web2.0) among selected academic libraries from 6 Gulf countries namely: Kingdom of Saudi Arabia, United Arab Emirates, Qatar, Bahrain, Oman and Kuwait

    KAUST Repository

    Ramli, Rindra M.

    2014-01-01

    This paper aims to explore and study the current usage trends of Web2.0 namely Facebook, RSS, Blogs and Twitter among selected higher education institutions’ libraries in 6 gulf countries namely: Kingdom of Saudi Arabia, United Arab Emirates, Qatar

  1. Online variational Bayesian filtering-based mobile target tracking in wireless sensor networks.

    Science.gov (United States)

    Zhou, Bingpeng; Chen, Qingchun; Li, Tiffany Jing; Xiao, Pei

    2014-11-11

    The received signal strength (RSS)-based online tracking for a mobile node in wireless sensor networks (WSNs) is investigated in this paper. Firstly, a multi-layer dynamic Bayesian network (MDBN) is introduced to characterize the target mobility with either directional or undirected movement. In particular, it is proposed to employ the Wishart distribution to approximate the time-varying RSS measurement precision's randomness due to the target movement. It is shown that the proposed MDBN offers a more general analysis model via incorporating the underlying statistical information of both the target movement and observations, which can be utilized to improve the online tracking capability by exploiting the Bayesian statistics. Secondly, based on the MDBN model, a mean-field variational Bayesian filtering (VBF) algorithm is developed to realize the online tracking of a mobile target in the presence of nonlinear observations and time-varying RSS precision, wherein the traditional Bayesian filtering scheme cannot be directly employed. Thirdly, a joint optimization between the real-time velocity and its prior expectation is proposed to enable online velocity tracking in the proposed online tacking scheme. Finally, the associated Bayesian Cramer-Rao Lower Bound (BCRLB) analysis and numerical simulations are conducted. Our analysis unveils that, by exploiting the potential state information via the general MDBN model, the proposed VBF algorithm provides a promising solution to the online tracking of a mobile node in WSNs. In addition, it is shown that the final tracking accuracy linearly scales with its expectation when the RSS measurement precision is time-varying.

  2. Development of the Special Operations Combat Management System

    Science.gov (United States)

    1999-08-01

    Distribution Unlimited Prepared for U. S. Army Soldier and Biological Chemical Command Soldier Systems Center Natick, Massachusetts 01760-5020 19990826 022...Army Soldier and Biological Chemical Command, Soldier Systems Center, ATTN: AMSSB-RSS-D(N) (H. Girolamo), Natick, MA 01760-5020 14. ABSTRACT The...system design, integration and test. American Megatrends Inc. provided the motherboard circuit design, layout and production. Tactical Technologies Inc

  3. Automating Information Assurance for Cyber Situational Awareness within a Smart Cloud System of Systems

    Science.gov (United States)

    2014-03-01

    monitoring and protection of data such as Transport Layer Security ( TLS ), Secure Sockets Layer ( SSL ), and Internet Protocol Security (IPsec) protocols...and usage of data loss prevention software. Protocols such as TLS , SSL , and IPsec encrypt data packets for secure transportation and decryption by...Representational State Transfer RSS rich site summary SA situational awareness SAF Singapore Armed Forces SoS system of systems SSL secure sockets layer S

  4. INEMO: Distributed RF-Based Indoor Location Determination with Confidence Indicator

    Directory of Open Access Journals (Sweden)

    Youxian Sun

    2007-12-01

    Full Text Available Using radio signal strength (RSS in sensor networks localization is an attractive method since it is a cost-efficient method to provide range indication. In this paper, we present a two-tier distributed approach for RF-based indoor location determination. Our approach, namely, INEMO, provides positioning accuracy of room granularity and office cube granularity. A target can first give a room granularity request and the background anchor nodes cooperate to accomplish the positioning process. Anchors in the same room can give cube granularity if the target requires further accuracy. Fixed anchor nodes keep monitoring status of nearby anchors and local reference matching is used to support room separation. Furthermore, we utilize the RSS difference to infer the positioning confidence. The simulation results demonstrate the efficiency of the proposed RF-based indoor location determination.

  5. Analysis on geometry-aware received signal strength based ...

    African Journals Online (AJOL)

    These handle different scenarios such as environment, adaptation, hybridization and the choice of context is dependent on user requirements. This paper present geometry-aware received signal strength (RSS) based positioning techniques where the influences of the geometries of the BSs (where location estimation ...

  6. WLAN Fingerprint Indoor Positioning Strategy Based on Implicit Crowdsourcing and Semi-Supervised Learning

    Directory of Open Access Journals (Sweden)

    Chunjing Song

    2017-11-01

    Full Text Available Wireless local area network (WLAN fingerprint positioning is an indoor localization technique with high accuracy and low hardware requirements. However, collecting received signal strength (RSS samples for the fingerprint database is time-consuming and labor-intensive, hindering the use of this technique. The popular crowdsourcing sampling technique has been introduced to reduce the workload of sample collection, but has two challenges: one is the heterogeneity of devices, which can significantly affect the positioning accuracy; the other is the requirement of users’ intervention in traditional crowdsourcing, which reduces the practicality of the system. In response to these challenges, we have proposed a new WLAN indoor positioning strategy, which incorporates a new preprocessing method for RSS samples, the implicit crowdsourcing sampling technique, and a semi-supervised learning algorithm. First, implicit crowdsourcing does not require users’ intervention. The acquisition program silently collects unlabeled samples, the RSS samples, without information about the position. Secondly, to cope with the heterogeneity of devices, the preprocessing method maps all the RSS values of samples to a uniform range and discretizes them. Finally, by using a large number of unlabeled samples with some labeled samples, Co-Forest, the introduced semi-supervised learning algorithm, creates and repeatedly refines a random forest ensemble classifier that performs well for location estimation. The results of experiments conducted in a real indoor environment show that the proposed strategy reduces the demand for large quantities of labeled samples and achieves good positioning accuracy.

  7. Neuroanatomical circuitry associated with exploratory eye movement in schizophrenia: a voxel-based morphometric study.

    Directory of Open Access Journals (Sweden)

    Linlin Qiu

    Full Text Available Schizophrenic patients present abnormalities in a variety of eye movement tasks. Exploratory eye movement (EEM dysfunction appears to be particularly specific to schizophrenia. However, the underlying mechanisms of EEM dysfunction in schizophrenia are not clearly understood. To assess the potential neuroanatomical substrates of EEM, we recorded EEM performance and conducted a voxel-based morphometric analysis of gray matter in 33 schizophrenic patients and 29 well matched healthy controls. In schizophrenic patients, decreased responsive search score (RSS and widespread gray matter density (GMD reductions were observed. Moreover, the RSS was positively correlated with GMD in distributed brain regions in schizophrenic patients. Furthermore, in schizophrenic patients, some brain regions with neuroanatomical deficits overlapped with some ones associated with RSS. These brain regions constituted an occipito-tempro-frontal circuitry involved in visual information processing and eye movement control, including the left calcarine cortex [Brodmann area (BA 17], the left cuneus (BA 18, the left superior occipital cortex (BA 18/19, the left superior frontal gyrus (BA 6, the left cerebellum, the right lingual cortex (BA 17/18, the right middle occipital cortex (BA19, the right inferior temporal cortex (BA 37, the right dorsolateral prefrontal cortex (BA 46 and bilateral precentral gyri (BA 6 extending to the frontal eye fields (FEF, BA 8. To our knowledge, we firstly reported empirical evidence that gray matter loss in the occipito-tempro-frontal neuroanatomical circuitry of visual processing system was associated with EEM performance in schizophrenia, which may be helpful for the future effort to reveal the underlying neural mechanisms for EEM disturbances in schizophrenia.

  8. Analysis of Tospovirus NSs Proteins in Suppression of Systemic Silencing.

    Science.gov (United States)

    Hedil, Marcio; Sterken, Mark G; de Ronde, Dryas; Lohuis, Dick; Kormelink, Richard

    2015-01-01

    RNA silencing is a sequence-specific gene regulation mechanism that in plants also acts antiviral. In order to counteract antiviral RNA silencing, viruses have evolved RNA silencing suppressors (RSS). In the case of tospoviruses, the non-structural NSs protein has been identified as the RSS. Although the tomato spotted wilt virus (TSWV) tospovirus NSs protein has been shown to exhibit affinity to long and small dsRNA molecules, its ability to suppress the non-cell autonomous part of RNA silencing has only been studied to a limited extent. Here, the NSs proteins of TSWV, groundnut ringspot virus (GRSV) and tomato yellow ring virus (TYRV), representatives for three distinct tospovirus species, have been studied on their ability and strength to suppress local and systemic silencing. A system has been developed to quantify suppression of GFP silencing in Nicotiana benthamiana 16C lines, to allow a comparison of relative RNA silencing suppressor strength. It is shown that NSs of all three tospoviruses are suppressors of local and systemic silencing. Unexpectedly, suppression of systemic RNA silencing by NSsTYRV was just as strong as those by NSsTSWV and NSsGRSV, even though NSsTYRV was expressed in lower amounts. Using the system established, a set of selected NSsTSWV gene constructs mutated in predicted RNA binding domains, as well as NSs from TSWV isolates 160 and 171 (resistance breakers of the Tsw resistance gene), were analyzed for their ability to suppress systemic GFP silencing. The results indicate another mode of RNA silencing suppression by NSs that acts further downstream the biogenesis of siRNAs and their sequestration. The findings are discussed in light of the affinity of NSs for small and long dsRNA, and recent mutant screen of NSsTSWV to map domains required for RSS activity and triggering of Tsw-governed resistance.

  9. Gene expression changes reflect clinical response in a placebo-controlled randomized trial of abatacept in patients with diffuse cutaneous systemic sclerosis.

    Science.gov (United States)

    Chakravarty, Eliza F; Martyanov, Viktor; Fiorentino, David; Wood, Tammara A; Haddon, David James; Jarrell, Justin Ansel; Utz, Paul J; Genovese, Mark C; Whitfield, Michael L; Chung, Lorinda

    2015-06-13

    Systemic sclerosis is an autoimmune disease characterized by inflammation and fibrosis of the skin and internal organs. We sought to assess the clinical and molecular effects associated with response to intravenous abatacept in patients with diffuse cutaneous systemic. Adult diffuse cutaneous systemic sclerosis patients were randomized in a 2:1 double-blinded fashion to receive abatacept or placebo over 24 weeks. Primary outcomes were safety and the change in modified Rodnan Skin Score (mRSS) at week 24 compared with baseline. Improvers were defined as patients with a decrease in mRSS of ≥30% post-treatment compared to baseline. Skin biopsies were obtained for differential gene expression and pathway enrichment analyses and intrinsic gene expression subset assignment. Ten subjects were randomized to abatacept (n = 7) or placebo (n = 3). Disease duration from first non-Raynaud's symptom was significantly longer (8.8 ± 3.8 years vs. 2.4 ± 1.6 years, p = 0.004) and median mRSS was higher (30 vs. 22, p = 0.05) in the placebo compared to abatacept group. Adverse events were similar in the two groups. Five out of seven patients (71%) randomized to abatacept and one out of three patients (33%) randomized to placebo experienced ≥30% improvement in skin score. Subjects receiving abatacept showed a trend toward improvement in mRSS at week 24 (-8.6 ± 7.5, p = 0.0625) while those in the placebo group did not (-2.3 ± 15, p = 0.75). After adjusting for disease duration, mRSS significantly improved in the abatacept compared with the placebo group (abatacept vs. placebo mRSS decrease estimate -9.8, 95% confidence interval -16.7 to -3.0, p = 0.0114). In the abatacept group, the patients in the inflammatory intrinsic subset showed a trend toward greater improvement in skin score at 24 weeks compared with the patients in the normal-like intrinsic subset (-13.5 ± 3.1 vs. -4.5 ± 6.4, p = 0.067). Abatacept resulted in decreased CD28 co-stimulatory gene expression in improvers

  10. Location service for wireless network using improved RSS-based cellular localisation

    Science.gov (United States)

    Fayaz, Sara; Sarrafian, Sara

    2014-06-01

    Value-added services, especially in mobile environments, have recently become the key component of making more profit and attracting more subscribers. One of the most commonly used such service is location-based advertiser services. The main issue which should be considered in providing such services is determining the position of the mobile terminals precisely. In this paper, one pattern recognition localisation method based on the signal strength appropriated for implementing a location-based service is presented. The main aim is to introduce some practical solutions to decrease error and computational load and also eliminate the necessity of updating the database. Practical results illustrate high accuracy of this technique and its suitability to apply in such services. The mean error declines to 9.7 m and mean error corresponding to CDF = 67% and CDF = 95% are less than 11 m and 23 m, respectively. We also present a location-based advertising service, in which the customer's interests and local time are considered, in order to enhance the efficiency and individualism of this service.

  11. Smartphone-Based Cooperative Indoor Localization with RFID Technology

    Directory of Open Access Journals (Sweden)

    Fernando Seco

    2018-01-01

    Full Text Available In GPS-denied indoor environments, localization and tracking of people can be achieved with a mobile device such as a smartphone by processing the received signal strength (RSS of RF signals emitted from known location beacons (anchor nodes, combined with Pedestrian Dead Reckoning (PDR estimates of the user motion. An enhacement of this localization technique is feasible if the users themselves carry additional RF emitters (mobile nodes, and the cooperative position estimates of a group of persons incorporate the RSS measurements exchanged between users. We propose a centralized cooperative particle filter (PF formulation over the joint state of all users that permits to process RSS measurements from both anchor and mobile emitters, as well as PDR motion estimates and map information (if available to increase the overall positioning accuracy, particularly in regions with low density of anchor nodes. Smartphones are used as a convenient mobile platform for sensor measurements acquisition, low-level processing, and data transmission to a central unit, where cooperative localization processing takes place. The cooperative method is experimentally demonstrated with four users moving in an area of 1600 m 2 , with 7 anchor nodes comprised of active RFID (radio frequency identification tags, and additional mobile tags carried by each user. Due to the limited coverage provided by the anchor beacons, RSS-based individual localization is inaccurate (6.1 m median error, but this improves to 4.9 m median error with the cooperative PF. Further gains are produced if the PDR information is added to the filter: median error of 3.1 m (individual and 2.6 m (cooperative; and if map information is also considered, the results are 1.8 m (individual and 1.6 m (cooperative. Thus, for each version of the particle filter, cooperative localization outperforms individual localization in terms of positioning accuracy.

  12. Analysis of Tospovirus NSs Proteins in Suppression of Systemic Silencing

    NARCIS (Netherlands)

    Hedil, M.; Sterken, M.G.; Ronde, de D.; Lohuis, D.; Kormelink, R.

    2015-01-01

    RNA silencing is a sequence-specific gene regulation mechanism that in plants also acts antiviral. In order to counteract antiviral RNA silencing, viruses have evolved RNA silencing suppressors (RSS). In the case of tospoviruses, the non-structural NSs protein has been identified as the RSS.

  13. Weighing of risk factors for penetrating keratoplasty graft failure: application of Risk Score System

    Directory of Open Access Journals (Sweden)

    Abdo Karim Tourkmani

    2017-03-01

    Full Text Available AIM: To analyze the relationship between the score obtained in the Risk Score System (RSS proposed by Hicks et al with penetrating keratoplasty (PKP graft failure at 1y postoperatively and among each factor in the RSS with the risk of PKP graft failure using univariate and multivariate analysis. METHODS: The retrospective cohort study had 152 PKPs from 152 patients. Eighteen cases were excluded from our study due to primary failure (10 cases, incomplete medical notes (5 cases and follow-up less than 1y (3 cases. We included 134 PKPs from 134 patients stratified by preoperative risk score. Spearman coefficient was calculated for the relationship between the score obtained and risk of failure at 1y. Univariate and multivariate analysis were calculated for the impact of every single risk factor included in the RSS over graft failure at 1y. RESULTS: Spearman coefficient showed statistically significant correlation between the score in the RSS and graft failure (P0.05 between diagnosis and lens status with graft failure. The relationship between the other risk factors studied and graft failure was significant (P<0.05, although the results for previous grafts and graft failure was unreliable. None of our patients had previous blood transfusion, thus, it had no impact. CONCLUSION: After the application of multivariate analysis techniques, some risk factors do not show the expected impact over graft failure at 1y.

  14. Monte Carlo-based simulation of dynamic jaws tomotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Sterpin, E.; Chen, Y.; Chen, Q.; Lu, W.; Mackie, T. R.; Vynckier, S. [Department of Molecular Imaging, Radiotherapy and Oncology, Universite Catholique de Louvain, 54 Avenue Hippocrate, 1200 Brussels, Belgium and Department of Medical Physics, University of Wisconsin-Madison, Madison, Wisconsin 53705 (United States); TomoTherapy Inc., 1240 Deming Way, Madison, Wisconsin 53717 (United States); 21 Century Oncology., 1240 D' onofrio, Madison, Wisconsin 53719 (United States); TomoTherapy Inc., 1240 Deming Way, Madison, Wisconsin 53717 and Department of Medical Physics, University of Wisconsin-Madison, Madison, Wisconsin 53705 (United States); Department of Radiotherapy and Oncology, Universite Catholique de Louvain, St-Luc University Hospital, 10 Avenue Hippocrate, 1200 Brussels (Belgium)

    2011-09-15

    Purpose: Original TomoTherapy systems may involve a trade-off between conformity and treatment speed, the user being limited to three slice widths (1.0, 2.5, and 5.0 cm). This could be overcome by allowing the jaws to define arbitrary fields, including very small slice widths (<1 cm), which are challenging for a beam model. The aim of this work was to incorporate the dynamic jaws feature into a Monte Carlo (MC) model called TomoPen, based on the MC code PENELOPE, previously validated for the original TomoTherapy system. Methods: To keep the general structure of TomoPen and its efficiency, the simulation strategy introduces several techniques: (1) weight modifiers to account for any jaw settings using only the 5 cm phase-space file; (2) a simplified MC based model called FastStatic to compute the modifiers faster than pure MC; (3) actual simulation of dynamic jaws. Weight modifiers computed with both FastStatic and pure MC were compared. Dynamic jaws simulations were compared with the convolution/superposition (C/S) of TomoTherapy in the ''cheese'' phantom for a plan with two targets longitudinally separated by a gap of 3 cm. Optimization was performed in two modes: asymmetric jaws-constant couch speed (''running start stop,'' RSS) and symmetric jaws-variable couch speed (''symmetric running start stop,'' SRSS). Measurements with EDR2 films were also performed for RSS for the formal validation of TomoPen with dynamic jaws. Results: Weight modifiers computed with FastStatic were equivalent to pure MC within statistical uncertainties (0.5% for three standard deviations). Excellent agreement was achieved between TomoPen and C/S for both asymmetric jaw opening/constant couch speed and symmetric jaw opening/variable couch speed, with deviations well within 2%/2 mm. For RSS procedure, agreement between C/S and measurements was within 2%/2 mm for 95% of the points and 3%/3 mm for 98% of the points, where dose is

  15. Monte Carlo-based simulation of dynamic jaws tomotherapy

    International Nuclear Information System (INIS)

    Sterpin, E.; Chen, Y.; Chen, Q.; Lu, W.; Mackie, T. R.; Vynckier, S.

    2011-01-01

    Purpose: Original TomoTherapy systems may involve a trade-off between conformity and treatment speed, the user being limited to three slice widths (1.0, 2.5, and 5.0 cm). This could be overcome by allowing the jaws to define arbitrary fields, including very small slice widths (<1 cm), which are challenging for a beam model. The aim of this work was to incorporate the dynamic jaws feature into a Monte Carlo (MC) model called TomoPen, based on the MC code PENELOPE, previously validated for the original TomoTherapy system. Methods: To keep the general structure of TomoPen and its efficiency, the simulation strategy introduces several techniques: (1) weight modifiers to account for any jaw settings using only the 5 cm phase-space file; (2) a simplified MC based model called FastStatic to compute the modifiers faster than pure MC; (3) actual simulation of dynamic jaws. Weight modifiers computed with both FastStatic and pure MC were compared. Dynamic jaws simulations were compared with the convolution/superposition (C/S) of TomoTherapy in the ''cheese'' phantom for a plan with two targets longitudinally separated by a gap of 3 cm. Optimization was performed in two modes: asymmetric jaws-constant couch speed (''running start stop,'' RSS) and symmetric jaws-variable couch speed (''symmetric running start stop,'' SRSS). Measurements with EDR2 films were also performed for RSS for the formal validation of TomoPen with dynamic jaws. Results: Weight modifiers computed with FastStatic were equivalent to pure MC within statistical uncertainties (0.5% for three standard deviations). Excellent agreement was achieved between TomoPen and C/S for both asymmetric jaw opening/constant couch speed and symmetric jaw opening/variable couch speed, with deviations well within 2%/2 mm. For RSS procedure, agreement between C/S and measurements was within 2%/2 mm for 95% of the points and 3%/3 mm for 98% of the points, where dose is greater than 30% of the prescription dose (gamma analysis

  16. Early detection of pharmacovigilance signals with automated methods based on false discovery rates: a comparative study.

    Science.gov (United States)

    Ahmed, Ismaïl; Thiessard, Frantz; Miremont-Salamé, Ghada; Haramburu, Françoise; Kreft-Jais, Carmen; Bégaud, Bernard; Tubert-Bitter, Pascale

    2012-06-01

    Improving the detection of drug safety signals has led several pharmacovigilance regulatory agencies to incorporate automated quantitative methods into their spontaneous reporting management systems. The three largest worldwide pharmacovigilance databases are routinely screened by the lower bound of the 95% confidence interval of proportional reporting ratio (PRR₀₂.₅), the 2.5% quantile of the Information Component (IC₀₂.₅) or the 5% quantile of the Gamma Poisson Shrinker (GPS₀₅). More recently, Bayesian and non-Bayesian False Discovery Rate (FDR)-based methods were proposed that address the arbitrariness of thresholds and allow for a built-in estimate of the FDR. These methods were also shown through simulation studies to be interesting alternatives to the currently used methods. The objective of this work was twofold. Based on an extensive retrospective study, we compared PRR₀₂.₅, GPS₀₅ and IC₀₂.₅ with two FDR-based methods derived from the Fisher's exact test and the GPS model (GPS(pH0) [posterior probability of the null hypothesis H₀ calculated from the Gamma Poisson Shrinker model]). Secondly, restricting the analysis to GPS(pH0), we aimed to evaluate the added value of using automated signal detection tools compared with 'traditional' methods, i.e. non-automated surveillance operated by pharmacovigilance experts. The analysis was performed sequentially, i.e. every month, and retrospectively on the whole French pharmacovigilance database over the period 1 January 1996-1 July 2002. Evaluation was based on a list of 243 reference signals (RSs) corresponding to investigations launched by the French Pharmacovigilance Technical Committee (PhVTC) during the same period. The comparison of detection methods was made on the basis of the number of RSs detected as well as the time to detection. Results comparing the five automated quantitative methods were in favour of GPS(pH0) in terms of both number of detections of true signals and

  17. Natural language processing and advanced information management

    Science.gov (United States)

    Hoard, James E.

    1989-01-01

    Integrating diverse information sources and application software in a principled and general manner will require a very capable advanced information management (AIM) system. In particular, such a system will need a comprehensive addressing scheme to locate the material in its docuverse. It will also need a natural language processing (NLP) system of great sophistication. It seems that the NLP system must serve three functions. First, it provides an natural language interface (NLI) for the users. Second, it serves as the core component that understands and makes use of the real-world interpretations (RWIs) contained in the docuverse. Third, it enables the reasoning specialists (RSs) to arrive at conclusions that can be transformed into procedures that will satisfy the users' requests. The best candidate for an intelligent agent that can satisfactorily make use of RSs and transform documents (TDs) appears to be an object oriented data base (OODB). OODBs have, apparently, an inherent capacity to use the large numbers of RSs and TDs that will be required by an AIM system and an inherent capacity to use them in an effective way.

  18. Mobile Position Estimation using Artificial Neural Network in CDMA Cellular Systems

    Directory of Open Access Journals (Sweden)

    Omar Waleed Abdulwahhab

    2017-01-01

    Full Text Available Using the Neural network as a type of associative memory will be introduced in this paper through the problem of mobile position estimation where mobile estimate its location depending on the signal strength reach to it from several around base stations where the neural network can be implemented inside the mobile. Traditional methods of time of arrival (TOA and received signal strength (RSS are used and compared with two analytical methods, optimal positioning method and average positioning method. The data that are used for training are ideal since they can be obtained based on geometry of CDMA cell topology. The test of the two methods TOA and RSS take many cases through a nonlinear path that MS can move through that region. The results show that the neural network has good performance compared with two other analytical methods which are average positioning method and optimal positioning method.

  19. Performance Analysis of Handover Measurements and Layer 3 Filtering for UTRAN LTE

    DEFF Research Database (Denmark)

    Anas, Mohmmad; Calabrese, Francesco Davide; Östling, Per-Erik

    2007-01-01

    B domain L3 filtering has been studied by using a dynamic system level simulator for a 3GPP UTRAN LTE recommended scenario. The results suggest that RSS measurement with linear or dB domain L3 filtering is a better criterion for handover in terms of reduced number of handovers for a small penalty......Handover is one of the key functionalities which tries to keep a user equipment (UE) connected to the best base station (eNodeB). Handover is usually based on the downlink received signal strength (RSS) and carrier-to-interference ratio (CIR) measurements. Processing of the handover measurement...... is usually done in Layer 1 (L1) and Layer 3 (L3) by the UE, and handover is initiated by the serving eNodeB if certain event criteria are met. L3 filtering can be done in linear domain or decibel (dB) domain. A hard handover algorithm based on the downlink RSS and CIR measurements along with linear and d...

  20. Topographic gradient based site characterization in India complemented by strong ground-motion spectral attributes

    KAUST Repository

    Nath, Sankar Kumar; Thingbaijam, Kiran Kumar; Adhikari, M. D.; Nayak, Avinash; Devaraj, N.; Ghosh, Soumalya K.; Mahajan, Arun K.

    2013-01-01

    We appraise topographic-gradient approach for site classification that employs correlations between 30. m column averaged shear-wave velocity and topographic gradients. Assessments based on site classifications reported from cities across India indicate that the approach is reasonably viable at regional level. Additionally, we experiment three techniques for site classification based on strong ground-motion recordings, namely Horizontal-to-Vertical Spectral Ratio (HVSR), Response Spectra Shape (RSS), and Horizontal-to-Vertical Response Spectral Ratio (HVRSR) at the strong motion stations located across the Himalayas and northeast India. Statistical tests on the results indicate that these three techniques broadly differentiate soil and rock sites while RSS and HVRSR yield better signatures. The results also support the implemented site classification in the light of strong ground-motion spectral attributes observed in different parts of the globe. © 2013 Elsevier Ltd.

  1. Topographic gradient based site characterization in India complemented by strong ground-motion spectral attributes

    KAUST Repository

    Nath, Sankar Kumar

    2013-12-01

    We appraise topographic-gradient approach for site classification that employs correlations between 30. m column averaged shear-wave velocity and topographic gradients. Assessments based on site classifications reported from cities across India indicate that the approach is reasonably viable at regional level. Additionally, we experiment three techniques for site classification based on strong ground-motion recordings, namely Horizontal-to-Vertical Spectral Ratio (HVSR), Response Spectra Shape (RSS), and Horizontal-to-Vertical Response Spectral Ratio (HVRSR) at the strong motion stations located across the Himalayas and northeast India. Statistical tests on the results indicate that these three techniques broadly differentiate soil and rock sites while RSS and HVRSR yield better signatures. The results also support the implemented site classification in the light of strong ground-motion spectral attributes observed in different parts of the globe. © 2013 Elsevier Ltd.

  2. ANÁLISIS DE DATOS DE PACIENTES SUBAGUDOS CON INFORMACIÓN REGISTRADA EN EL CONJUNTO MINIMO BASICO DE DATOS SOCIOSANITARIOS (CMBD-RSS

    Directory of Open Access Journals (Sweden)

    Cristina Meléndez Frigola

    2016-01-01

    Full Text Available Fundamentos: Es necesario profundizar en el conocimiento del conjunto mínimo básico de datos (CMBD-RSS de la línea sociosanitaria de pacientes subagudos (con patología crónica asociada y frecuentes ingresos. El objetivo de este estudio fue conocer las características sanitarias de este tipo de pacientes. Métodos: Muestra de 660 pacientes que ingresaron en camas de subagudos del Hospital Santa Caterina (Región Sanitaria Girona, de octubre de 2013 a diciembre de 2014. La fuente de información fue el CMBD-RSS. Se realizó análisis estadístico descriptivo y se verificó la relación entre variables: número de días de estancia y edad, procedencia del paciente y días de estancia (Significación de Mann-Whitney; diagnóstico principal y días de estancia (Kruskal-Wallis. Se contrastaron la procedencia y el diagnóstico principal mediante χ2 de Pearson y el coeficiente V de Cramer. Resultados: La edad media de las personas de la muestra fue de 83 años, el 55% eran mujeres. Los cinco grupos de enfermedades que concentraron el 80% de los diagnósticos de los pacientes fueron trastorno mental, enfermedades del sistema nervioso, cardiovasculares, respiratoria e infecciones genitourinarias. Los pacientes que procedieron del hospital, tuvieron una estancia media 8 días inferior a los procedentes de domicilio (9 días. En el 80% de los casos se retornó al domicilio al alta. Conclusiones: Las personas con patología crónica asociada con frecuentes ingresos hospitalarios configuran un grupo de riesgo importante. La elevada edad y la descompensación clínica añaden complejidad. Una correcta valoración del paciente al inicio del episodio facilita la asignación del recurso más adecuado. En la muestra estudiada se plasman las patologías más prevalentes, la procedencia, la estancia media y el destino al alta.

  3. A Single RF Emitter-Based Indoor Navigation Method for Autonomous Service Robots.

    Science.gov (United States)

    Sherwin, Tyrone; Easte, Mikala; Chen, Andrew Tzer-Yeu; Wang, Kevin I-Kai; Dai, Wenbin

    2018-02-14

    Location-aware services are one of the key elements of modern intelligent applications. Numerous real-world applications such as factory automation, indoor delivery, and even search and rescue scenarios require autonomous robots to have the ability to navigate in an unknown environment and reach mobile targets with minimal or no prior infrastructure deployment. This research investigates and proposes a novel approach of dynamic target localisation using a single RF emitter, which will be used as the basis of allowing autonomous robots to navigate towards and reach a target. Through the use of multiple directional antennae, Received Signal Strength (RSS) is compared to determine the most probable direction of the targeted emitter, which is combined with the distance estimates to improve the localisation performance. The accuracy of the position estimate is further improved using a particle filter to mitigate the fluctuating nature of real-time RSS data. Based on the direction information, a motion control algorithm is proposed, using Simultaneous Localisation and Mapping (SLAM) and A* path planning to enable navigation through unknown complex environments. A number of navigation scenarios were developed in the context of factory automation applications to demonstrate and evaluate the functionality and performance of the proposed system.

  4. A Single RF Emitter-Based Indoor Navigation Method for Autonomous Service Robots

    Directory of Open Access Journals (Sweden)

    Tyrone Sherwin

    2018-02-01

    Full Text Available Location-aware services are one of the key elements of modern intelligent applications. Numerous real-world applications such as factory automation, indoor delivery, and even search and rescue scenarios require autonomous robots to have the ability to navigate in an unknown environment and reach mobile targets with minimal or no prior infrastructure deployment. This research investigates and proposes a novel approach of dynamic target localisation using a single RF emitter, which will be used as the basis of allowing autonomous robots to navigate towards and reach a target. Through the use of multiple directional antennae, Received Signal Strength (RSS is compared to determine the most probable direction of the targeted emitter, which is combined with the distance estimates to improve the localisation performance. The accuracy of the position estimate is further improved using a particle filter to mitigate the fluctuating nature of real-time RSS data. Based on the direction information, a motion control algorithm is proposed, using Simultaneous Localisation and Mapping (SLAM and A* path planning to enable navigation through unknown complex environments. A number of navigation scenarios were developed in the context of factory automation applications to demonstrate and evaluate the functionality and performance of the proposed system.

  5. Probabilistic risk assessment (PRA) on the effectiveness of a core rescue system (SSN) for PWRs

    International Nuclear Information System (INIS)

    Petrangeli, G.; Valeri, A.

    1983-01-01

    Safety systems for the prevention of LWR core severe damage have recently been studied, which are based on automatic primary system depressurization and on borated water injection by low pressure accumulators. These systems have been named Core Rescue System (SSN). The present study evaluates the reduction in core melt probability brought about by the installation of a SSN system on the RSS (WASH 1400) PWR plant (Surry 1). The calculated result is a core melt probability reduction factor of about 250. Taking into account the possible effect of external or internal unknown events of negligible, yet undefined, probability it is concluded that a SSN system can make a plant ten times safer. The first part of a review report by Prof. N.C.Rasmussen, MIT, dealing with general comment, is attached

  6. Development of an Indoor Location Based Service Test Bed and Geographic Information System with a Wireless Sensor Network

    Science.gov (United States)

    Jan, Shau-Shiun; Hsu, Li-Ta; Tsai, Wen-Ming

    2010-01-01

    In order to provide the seamless navigation and positioning services for indoor environments, an indoor location based service (LBS) test bed is developed to integrate the indoor positioning system and the indoor three-dimensional (3D) geographic information system (GIS). A wireless sensor network (WSN) is used in the developed indoor positioning system. Considering the power consumption, in this paper the ZigBee radio is used as the wireless protocol, and the received signal strength (RSS) fingerprinting positioning method is applied as the primary indoor positioning algorithm. The matching processes of the user location include the nearest neighbor (NN) algorithm, the K-weighted nearest neighbors (KWNN) algorithm, and the probabilistic approach. To enhance the positioning accuracy for the dynamic user, the particle filter is used to improve the positioning performance. As part of this research, a 3D indoor GIS is developed to be used with the indoor positioning system. This involved using the computer-aided design (CAD) software and the virtual reality markup language (VRML) to implement a prototype indoor LBS test bed. Thus, a rapid and practical procedure for constructing a 3D indoor GIS is proposed, and this GIS is easy to update and maintenance for users. The building of the Department of Aeronautics and Astronautics at National Cheng Kung University in Taiwan is used as an example to assess the performance of various algorithms for the indoor positioning system. PMID:22319282

  7. Development of an Indoor Location Based Service Test Bed and Geographic Information System with a Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Shau-Shiun Jan

    2010-03-01

    Full Text Available In order to provide the seamless navigation and positioning services for indoor environments, an indoor location based service (LBS test bed is developed to integrate the indoor positioning system and the indoor three-dimensional (3D geographic information system (GIS. A wireless sensor network (WSN is used in the developed indoor positioning system. Considering the power consumption, in this paper the ZigBee radio is used as the wireless protocol, and the received signal strength (RSS fingerprinting positioning method is applied as the primary indoor positioning algorithm. The matching processes of the user location include the nearest neighbor (NN algorithm, the K-weighted nearest neighbors (KWNN algorithm, and the probabilistic approach. To enhance the positioning accuracy for the dynamic user, the particle filter is used to improve the positioning performance. As part of this research, a 3D indoor GIS is developed to be used with the indoor positioning system. This involved using the computer-aided design (CAD software and the virtual reality markup language (VRML to implement a prototype indoor LBS test bed. Thus, a rapid and practical procedure for constructing a 3D indoor GIS is proposed, and this GIS is easy to update and maintenance for users. The building of the Department of Aeronautics and Astronautics at National Cheng Kung University in Taiwan is used as an example to assess the performance of various algorithms for the indoor positioning system.

  8. Robust Floor Determination Algorithm for Indoor Wireless Localization Systems under Reference Node Failure

    Directory of Open Access Journals (Sweden)

    Kriangkrai Maneerat

    2016-01-01

    Full Text Available One of the challenging problems for indoor wireless multifloor positioning systems is the presence of reference node (RN failures, which cause the values of received signal strength (RSS to be missed during the online positioning phase of the location fingerprinting technique. This leads to performance degradation in terms of floor accuracy, which in turn affects other localization procedures. This paper presents a robust floor determination algorithm called Robust Mean of Sum-RSS (RMoS, which can accurately determine the floor on which mobile objects are located and can work under either the fault-free scenario or the RN-failure scenarios. The proposed fault tolerance floor algorithm is based on the mean of the summation of the strongest RSSs obtained from the IEEE 802.15.4 Wireless Sensor Networks (WSNs during the online phase. The performance of the proposed algorithm is compared with those of different floor determination algorithms in literature. The experimental results show that the proposed robust floor determination algorithm outperformed the other floor algorithms and can achieve the highest percentage of floor determination accuracy in all scenarios tested. Specifically, the proposed algorithm can achieve greater than 95% correct floor determination under the scenario in which 40% of RNs failed.

  9. A Routing Protocol Based on Received Signal Strength for Underwater Wireless Sensor Networks (UWSNs

    Directory of Open Access Journals (Sweden)

    Meiju Li

    2017-11-01

    Full Text Available Underwater wireless sensor networks (UWSNs are featured by long propagation delay, limited energy, narrow bandwidth, high BER (Bit Error Rate and variable topology structure. These features make it very difficult to design a short delay and high energy-efficiency routing protocol for UWSNs. In this paper, a routing protocol independent of location information is proposed based on received signal strength (RSS, which is called RRSS. In RRSS, a sensor node firstly establishes a vector from the node to a sink node; the length of the vector indicates the RSS of the beacon signal (RSSB from the sink node. A node selects the next-hop along the vector according to RSSB and the RSS of a hello packet (RSSH. The node nearer to the vector has higher priority to be a candidate next-hop. To avoid data packets being delivered to the neighbor nodes in a void area, a void-avoiding algorithm is introduced. In addition, residual energy is considered when selecting the next-hop. Meanwhile, we establish mathematic models to analyze the robustness and energy efficiency of RRSS. Lastly, we conduct extensive simulations, and the simulation results show RRSS can save energy consumption and decrease end-to-end delay.

  10. Hybrid Indoor-Based WLAN-WSN Localization Scheme for Improving Accuracy Based on Artificial Neural Network

    Directory of Open Access Journals (Sweden)

    Zahid Farid

    2016-01-01

    Full Text Available In indoor environments, WiFi (RSS based localization is sensitive to various indoor fading effects and noise during transmission, which are the main causes of localization errors that affect its accuracy. Keeping in view those fading effects, positioning systems based on a single technology are ineffective in performing accurate localization. For this reason, the trend is toward the use of hybrid positioning systems (combination of two or more wireless technologies in indoor/outdoor localization scenarios for getting better position accuracy. This paper presents a hybrid technique to implement indoor localization that adopts fingerprinting approaches in both WiFi and Wireless Sensor Networks (WSNs. This model exploits machine learning, in particular Artificial Natural Network (ANN techniques, for position calculation. The experimental results show that the proposed hybrid system improved the accuracy, reducing the average distance error to 1.05 m by using ANN. Applying Genetic Algorithm (GA based optimization technique did not incur any further improvement to the accuracy. Compared to the performance of GA optimization, the nonoptimized ANN performed better in terms of accuracy, precision, stability, and computational time. The above results show that the proposed hybrid technique is promising for achieving better accuracy in real-world positioning applications.

  11. Wireless Indoor Location Estimation Based on Neural Network RSS Signature Recognition (LENSR)

    Energy Technology Data Exchange (ETDEWEB)

    Kurt Derr; Milos Manic

    2008-06-01

    Location Based Services (LBS), context aware applications, and people and object tracking depend on the ability to locate mobile devices, also known as localization, in the wireless landscape. Localization enables a diverse set of applications that include, but are not limited to, vehicle guidance in an industrial environment, security monitoring, self-guided tours, personalized communications services, resource tracking, mobile commerce services, guiding emergency workers during fire emergencies, habitat monitoring, environmental surveillance, and receiving alerts. This paper presents a new neural network approach (LENSR) based on a competitive topological Counter Propagation Network (CPN) with k-nearest neighborhood vector mapping, for indoor location estimation based on received signal strength. The advantage of this approach is both speed and accuracy. The tested accuracy of the algorithm was 90.6% within 1 meter and 96.4% within 1.5 meters. Several approaches for location estimation using WLAN technology were reviewed for comparison of results.

  12. Combining smart lighting and radio fingerprinting for improved indoor localization

    NARCIS (Netherlands)

    Kanaris, Loizos; Kokkinis, Akis; Liotta, Antonio; Stavrou, Stavros

    2017-01-01

    This work proposes a hybrid indoor positioning system, which combines a minimal smart lighting deployment for Visible Light Positioning (VPL) purposes, with an IEEE 802.11 RSS Fingerprint-based Indoor Positioning System. Such a hybrid deployment improves the localization performance by utilizing the

  13. A Smartphone Indoor Localization Algorithm Based on WLAN Location Fingerprinting with Feature Extraction and Clustering.

    Science.gov (United States)

    Luo, Junhai; Fu, Liang

    2017-06-09

    With the development of communication technology, the demand for location-based services is growing rapidly. This paper presents an algorithm for indoor localization based on Received Signal Strength (RSS), which is collected from Access Points (APs). The proposed localization algorithm contains the offline information acquisition phase and online positioning phase. Firstly, the AP selection algorithm is reviewed and improved based on the stability of signals to remove useless AP; secondly, Kernel Principal Component Analysis (KPCA) is analyzed and used to remove the data redundancy and maintain useful characteristics for nonlinear feature extraction; thirdly, the Affinity Propagation Clustering (APC) algorithm utilizes RSS values to classify data samples and narrow the positioning range. In the online positioning phase, the classified data will be matched with the testing data to determine the position area, and the Maximum Likelihood (ML) estimate will be employed for precise positioning. Eventually, the proposed algorithm is implemented in a real-world environment for performance evaluation. Experimental results demonstrate that the proposed algorithm improves the accuracy and computational complexity.

  14. A Smartphone Indoor Localization Algorithm Based on WLAN Location Fingerprinting with Feature Extraction and Clustering

    Directory of Open Access Journals (Sweden)

    Junhai Luo

    2017-06-01

    Full Text Available With the development of communication technology, the demand for location-based services is growing rapidly. This paper presents an algorithm for indoor localization based on Received Signal Strength (RSS, which is collected from Access Points (APs. The proposed localization algorithm contains the offline information acquisition phase and online positioning phase. Firstly, the AP selection algorithm is reviewed and improved based on the stability of signals to remove useless AP; secondly, Kernel Principal Component Analysis (KPCA is analyzed and used to remove the data redundancy and maintain useful characteristics for nonlinear feature extraction; thirdly, the Affinity Propagation Clustering (APC algorithm utilizes RSS values to classify data samples and narrow the positioning range. In the online positioning phase, the classified data will be matched with the testing data to determine the position area, and the Maximum Likelihood (ML estimate will be employed for precise positioning. Eventually, the proposed algorithm is implemented in a real-world environment for performance evaluation. Experimental results demonstrate that the proposed algorithm improves the accuracy and computational complexity.

  15. Research on control function switch of nuclear power plant control room

    International Nuclear Information System (INIS)

    Mei Shibo; Mao Ting; Cheng Bo; Zhang Gang

    2014-01-01

    The nuclear power plant provides main control room (MCR) to the unit operators for the plant monitoring and control, and provides the remote shutdown station (RSS) as the back-up control room, which is used only when MCR is unavailable. The RSS could be used to monitor and control the plant, bring the plant into shutdown state and remove the residual heat. The command from MCR and RSS is blocked by each other and can not be executed at the same time. The operation mode switch function between MCR and RSS is carried out by MCR/RSS mode switches. The operation mode switch scheme of CPR1000, ERP and AP1000 were compared and researched, and some design bases for new nuclear power plant were submitted in this paper. These design bases could be referred during the design of control function switch for the new nuclear power plants, in order to put forward a more practical, simple, safe and convenient scheme. (authors)

  16. Automated web usage data mining and recommendation system using K-Nearest Neighbor (KNN classification method

    Directory of Open Access Journals (Sweden)

    D.A. Adeniyi

    2016-01-01

    Full Text Available The major problem of many on-line web sites is the presentation of many choices to the client at a time; this usually results to strenuous and time consuming task in finding the right product or information on the site. In this work, we present a study of automatic web usage data mining and recommendation system based on current user behavior through his/her click stream data on the newly developed Really Simple Syndication (RSS reader website, in order to provide relevant information to the individual without explicitly asking for it. The K-Nearest-Neighbor (KNN classification method has been trained to be used on-line and in Real-Time to identify clients/visitors click stream data, matching it to a particular user group and recommend a tailored browsing option that meet the need of the specific user at a particular time. To achieve this, web users RSS address file was extracted, cleansed, formatted and grouped into meaningful session and data mart was developed. Our result shows that the K-Nearest Neighbor classifier is transparent, consistent, straightforward, simple to understand, high tendency to possess desirable qualities and easy to implement than most other machine learning techniques specifically when there is little or no prior knowledge about data distribution.

  17. Four-Way Relaying in Wireless Cellular Systems

    DEFF Research Database (Denmark)

    Liu, Huaping; Popovski, Petar; De Carvalho, Elisabeth

    2013-01-01

    Two-way relaying in wireless systems has initiated a large research effort during the past few years. Nevertheless, it represents only a specific traffic pattern and it is of interest to investigate other traffic patterns where such a simultaneous processing of information flows can bring...... performance advantage. In this paper we consider a \\emph{four-way relaying} scenario, where each of the two Mobile Stations (MSs) has a two-way connection to the same Base Station (BS), while each connection is through a dedicated Relay Station (RS). The RSs are placed in such a way that one RS...... of the new scheme for Decode-and-Forward (DF) operational model for the RS. We compare the performance with a state-of-the-art reference scheme, based on two-way relaying with DF. The results indicate that the achievable rate regions are significantly enlarged for the new scheme....

  18. Rigid Spine Syndrome among Children in Oman

    Directory of Open Access Journals (Sweden)

    Roshan Koul

    2015-08-01

    Full Text Available Objectives: Rigidity of the spine is common in adults but is rarely observed in children. The aim of this study was to report on rigid spine syndrome (RSS among children in Oman. Methods: Data on children diagnosed with RSS were collected consecutively at presentation between 1996 and 2014 at the Sultan Qaboos University Hospital (SQUH in Muscat, Oman. A diagnosis of RSS was based on the patient’s history, clinical examination, biochemical investigations, electrophysiological findings, neuro-imaging and muscle biopsy. Atrophy of the paraspinal muscles, particularly the erector spinae, was the diagnostic feature; this was noted using magnetic resonance imaging of the spine. Children with disease onset in the paraspinal muscles were labelled as having primary RSS or rigid spinal muscular dystrophy. Secondary RSS was classified as RSS due to the late involvement of other muscle diseases. Results: Over the 18-year period, 12 children were included in the study, with a maleto- female ratio of 9:3. A total of 10 children were found to have primary RSS or rigid spinal muscular dystrophy syndrome while two had secondary RSS. Onset of the disease ranged from birth to 18 months of age. A family history was noted, with two siblings from one family and three siblings from another (n = 5. On examination, children with primary RSS had typical features of severe spine rigidity at onset, with the rest of the neurological examination being normal. Conclusion: RSS is a rare disease with only 12 reported cases found at SQUH during the study period. Cases of primary RSS should be differentiated from the secondary type.

  19. Analysis of Tospovirus NSs Proteins in Suppression of Systemic Silencing

    OpenAIRE

    Hedil, Marcio; Sterken, Mark G.; de Ronde, Dryas; Lohuis, Dick; Kormelink, Richard

    2015-01-01

    RNA silencing is a sequence-specific gene regulation mechanism that in plants also acts antiviral. In order to counteract antiviral RNA silencing, viruses have evolved RNA silencing suppressors (RSS). In the case of tospoviruses, the non-structural NSs protein has been identified as the RSS. Although the tomato spotted wilt virus (TSWV) tospovirus NSs protein has been shown to exhibit affinity to long and small dsRNA molecules, its ability to suppress the non-cell autonomous part of RNA silen...

  20. SU-D-BRB-01: A Comparison of Learning Methods for Knowledge Based Dose Prediction for Coplanar and Non-Coplanar Liver Radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Tran, A; Ruan, D; Woods, K; Yu, V; Nguyen, D; Sheng, K [UCLA School of Medicine, Los Angeles, CA (United States)

    2016-06-15

    Purpose: The predictive power of knowledge based planning (KBP) has considerable potential in the development of automated treatment planning. Here, we examine the predictive capabilities and accuracy of previously reported KBP methods, as well as an artificial neural networks (ANN) method. Furthermore, we compare the predictive accuracy of these methods on coplanar volumetric-modulated arc therapy (VMAT) and non-coplanar 4π radiotherapy. Methods: 30 liver SBRT patients previously treated using coplanar VMAT were selected for this study. The patients were re-planned using 4π radiotherapy, which involves 20 optimally selected non-coplanar IMRT fields. ANNs were used to incorporate enhanced geometric information including liver and PTV size, prescription dose, patient girth, and proximity to beams. The performance of ANN was compared to three methods from statistical voxel dose learning (SVDL), wherein the doses of voxels sharing the same distance to the PTV are approximated by either taking the median of the distribution, non-parametric fitting, or skew-normal fitting. These three methods were shown to be capable of predicting DVH, but only median approximation can predict 3D dose. Prediction methods were tested using leave-one-out cross-validation tests and evaluated using residual sum of squares (RSS) for DVH and 3D dose predictions. Results: DVH prediction using non-parametric fitting had the lowest average RSS with 0.1176(4π) and 0.1633(VMAT), compared to 0.4879(4π) and 1.8744(VMAT) RSS for ANN. 3D dose prediction with median approximation had lower RSS with 12.02(4π) and 29.22(VMAT), compared to 27.95(4π) and 130.9(VMAT) for ANN. Conclusion: Paradoxically, although the ANNs included geometric features in addition to the distances to the PTV, it did not perform better in predicting DVH or 3D dose compared to simpler, faster methods based on the distances alone. The study further confirms that the prediction of 4π non-coplanar plans were more accurate than

  1. L-selectin and skin damage in systemic sclerosis.

    Directory of Open Access Journals (Sweden)

    James V Dunne

    Full Text Available L-selectin ligands are induced on the endothelium of inflammatory sites. L-selectin expression on neutrophils and monocytes may mediate the primary adhesion of these cells at sites of inflammation by mediating the leukocyte-leukocyte interactions that facilitate their recruitment. L-selectin retains functional activity in its soluble form. Levels of soluble L-selectin have been reported as both elevated and lowered in patients with systemic sclerosis (SSc. This preliminary study seeks to discern amongst these disparate results and to discover whether there is an association between L-selectin concentrations in plasma and skin damage in SSc patients.Nineteen cases with limited systemic sclerosis (lSSc and 11 cases with diffuse systemic sclerosis (dSSc were compared on a pairwise basis to age- and sex-matched controls. Criteria of the American College of Rheumatology were used to diagnose SSc. Skin involvement was assessed using the modified Rodnan skin score (mRSS. We find no association between mRSS and plasma L-selectin concentration in lSSc cases (p = 0.9944 but a statistically significant negative correlation in dSSc cases (R(2 = 73.11 per cent, p = 0.0008. The interpretation of the slope for dSSc cases is that for each increase of 100 ng/ml in soluble L-selectin concentration, the mRSS drops 4.22 (95 per cent CI: 2.29, 6.16. There was also a highly statistically significant negative correlation between sL-selectin and disease activity (p = 0.0007 and severity (p = 0.0007 in dSSc cases but not in lSSc cases (p = 0.2596, p = 0.7575, respectively.No effective treatments exist for skin damage in SSc patients. Nor is there a laboratory alternative to the modified Rodnan skin score as is the case for other organs within the body. Modulation of circulating L-selectin is a promising target for reducing skin damage in dSSc patients. Plasma levels of soluble L-selectin could serve as an outcome measure for dSSc patients in

  2. Catalase as a sulfide-sulfur oxido-reductase: An ancient (and modern?) regulator of reactive sulfur species (RSS).

    Science.gov (United States)

    Olson, Kenneth R; Gao, Yan; DeLeon, Eric R; Arif, Maaz; Arif, Faihaan; Arora, Nitin; Straub, Karl D

    2017-08-01

    Catalase is well-known as an antioxidant dismutating H 2 O 2 to O 2 and H 2 O. However, catalases evolved when metabolism was largely sulfur-based, long before O 2 and reactive oxygen species (ROS) became abundant, suggesting catalase metabolizes reactive sulfide species (RSS). Here we examine catalase metabolism of H 2 S n , the sulfur analog of H 2 O 2 , hydrogen sulfide (H 2 S) and other sulfur-bearing molecules using H 2 S-specific amperometric electrodes and fluorophores to measure polysulfides (H 2 S n ; SSP4) and ROS (dichlorofluorescein, DCF). Catalase eliminated H 2 S n , but did not anaerobically generate H 2 S, the expected product of dismutation. Instead, catalase concentration- and oxygen-dependently metabolized H 2 S and in so doing acted as a sulfide oxidase with a P 50 of 20mmHg. H 2 O 2 had little effect on catalase-mediated H 2 S metabolism but in the presence of the catalase inhibitor, sodium azide (Az), H 2 O 2 rapidly and efficiently expedited H 2 S metabolism in both normoxia and hypoxia suggesting H 2 O 2 is an effective electron acceptor in this reaction. Unexpectedly, catalase concentration-dependently generated H 2 S from dithiothreitol (DTT) in both normoxia and hypoxia, concomitantly oxidizing H 2 S in the presence of O 2 . H 2 S production from DTT was inhibited by carbon monoxide and augmented by NADPH suggesting that catalase heme-iron is the catalytic site and that NADPH provides reducing equivalents. Catalase also generated H 2 S from garlic oil, diallyltrisulfide, thioredoxin and sulfur dioxide, but not from sulfite, metabisulfite, carbonyl sulfide, cysteine, cystine, glutathione or oxidized glutathione. Oxidase activity was also present in catalase from Aspergillus niger. These results show that catalase can act as either a sulfide oxidase or sulfur reductase and they suggest that these activities likely played a prominent role in sulfur metabolism during evolution and may continue do so in modern cells as well. This also appears

  3. Indoor Location Sensing with Invariant Wi-Fi Received Signal Strength Fingerprinting

    Directory of Open Access Journals (Sweden)

    Mohd Nizam Husen

    2016-11-01

    Full Text Available A method of location fingerprinting based on the Wi-Fi received signal strength (RSS in an indoor environment is presented. The method aims to overcome the RSS instability due to varying channel disturbances in time by introducing the concept of invariant RSS statistics. The invariant RSS statistics represent here the RSS distributions collected at individual calibration locations under minimal random spatiotemporal disturbances in time. The invariant RSS statistics thus collected serve as the reference pattern classes for fingerprinting. Fingerprinting is carried out at an unknown location by identifying the reference pattern class that maximally supports the spontaneous RSS sensed from individual Wi-Fi sources. A design guideline is also presented as a rule of thumb for estimating the number of Wi-Fi signal sources required to be available for any given number of calibration locations under a certain level of random spatiotemporal disturbances. Experimental results show that the proposed method not only provides 17% higher success rate than conventional ones but also removes the need for recalibration. Furthermore, the resolution is shown finer by 40% with the execution time more than an order of magnitude faster than the conventional methods. These results are also backed up by theoretical analysis.

  4. Semantics-based publication management using RSS and FOAF

    NARCIS (Netherlands)

    Mika, Peter; Klein, Michel; Serban, Radu

    2005-01-01

    Listing references to scientific publications on personal or group homepages is a common practice. Doing this in a consistent and structured manner either requires a lot of discipline or a centralized database. Scientific publication, however, is a distributed activity by nature. We present a

  5. MRI signal-based quantification of subchondral bone at the tibial plateau: a population study

    Energy Technology Data Exchange (ETDEWEB)

    MacKay, James W. [Norfolk and Norwich University Hospital, Department of Radiology, Norwich (United Kingdom); Norfolk and Norwich University Hospital, Radiology Academy, Cotman Centre, Norwich (United Kingdom); Godley, Keith C.; Toms, Andoni P. [Norfolk and Norwich University Hospital, Department of Radiology, Norwich (United Kingdom)

    2014-11-15

    To determine whether differences in subchondral sclerosis at the tibial plateau could be detected with magnetic resonance (MR) imaging in two different age groups. This was a retrospective hypothesis-testing study. Thirty-two knees in group A (25-30 year olds) and 32 knees in group B (45-50 years old) were included. Participants had no MR features of osteoarthritis (OA). On coronal images, tibial articular cartilage thickness was measured, and regions of interest were created in the medial and lateral tibial plateau subchondral bone and in the tibial metaphysis. The measure of heterogeneity at the tibial plateaux was the ratio of the standard deviation of the signal in the medial/lateral compartment to the standard deviation of the signal in the metaphysis (ratio of standard deviations - RSS{sub medial}/RSS{sub lateral}). Differences between groups were assessed using unpaired Student's t-tests. Mean RSS{sub medial} was 2.61 (standard deviation, SD = 0.77) in group A and 2.97 (SD = 0.59) in group B. Mean RSS{sub lateral} in group A was 1.86 (SD = 0.63) and 1.89 (SD = 0.43) in group B. Mean total cartilage thickness (in mm) in group A was 3.38 (SD = 0.90) for the medial and 3.90 (SD = 1.09) for the lateral compartment and 3.44 (SD = 0.74) for the medial and 3.96 (SD = 0.96) for the lateral compartment in group B. The only parameter to show a statistically significant difference between groups was RSS{sub medial} (p = 0.04). A difference in medial subchondral bone sclerosis between two age groups was demonstrated in the absence of MR features of OA. This may represent the earliest OA change detectable on MR imaging. (orig.)

  6. An Event Reporting and Early-Warning Safety System Based on the Internet of Things for Underground Coal Mines: A Case Study

    Directory of Open Access Journals (Sweden)

    Byung Wan Jo

    2017-09-01

    Full Text Available Fatal accidents associated with underground coal mines require the implementation of high-level gas monitoring and miner’s localization approaches to promote underground safety and health. This study introduces a real-time monitoring, event-reporting and early-warning platform, based on cluster analysis for outlier detection, spatiotemporal statistical analysis, and an RSS range-based weighted centroid localization algorithm for improving safety management and preventing accidents in underground coal mines. The proposed platform seamlessly integrates monitoring, analyzing, and localization approaches using the Internet of Things (IoT, cloud computing, a real-time operational database, application gateways, and application program interfaces. The prototype has been validated and verified at the operating underground Hassan Kishore coal mine. Sensors for air quality parameters including temperature, humidity, CH4, CO2, and CO demonstrated an excellent performance, with regression constants always greater than 0.97 for each parameter when compared to their commercial equivalent. This framework enables real-time monitoring, identification of abnormal events (>90%, and verification of a miner’s localization (with <1.8 m of error in the harsh environment of underground mines. The main contribution of this study is the development of an open source, customizable, and cost-effective platform for effectively promoting underground coal mine safety. This system is helpful for solving the problems of accessibility, serviceability, interoperability, and flexibility associated with safety in coal mines.

  7. Uplink Capacity of 802.16j Mobile Multihop Relay Networks with Transparent Relays

    DEFF Research Database (Denmark)

    Wang, Hua; Andrews, Jeffrey G.; Iversen, Villy Bæk

    2009-01-01

    -to-end spectral efficiency. Furthermore, the position and the number of relay stations (RSs) have a great impact on the capacity gain. These results are further verified in the evaluation of the system Erlang capacity. The study demonstrates that with proper deployment of RSs and use of MIMO transmission...

  8. Refractory septic shock in children: a European Society of Paediatric and Neonatal Intensive Care definition.

    Science.gov (United States)

    Morin, Luc; Ray, Samiran; Wilson, Clare; Remy, Solenn; Benissa, Mohamed Rida; Jansen, Nicolaas J G; Javouhey, Etienne; Peters, Mark J; Kneyber, Martin; De Luca, Daniele; Nadel, Simon; Schlapbach, Luregn Jan; Maclaren, Graeme; Tissieres, Pierre

    2016-12-01

    Although overall paediatric septic shock mortality is decreasing, refractory septic shock (RSS) is still associated with high mortality. A definition for RSS is urgently needed to facilitate earlier identification and treatment. We aim to establish a European society of paediatric and neonatal intensive care (ESPNIC) experts' definition of paediatric RSS. We conducted a two-round Delphi study followed by an observational multicentre retrospective study. One hundred and fourteen paediatric intensivists answered a clinical case-based, two-round Delphi survey, identifying clinical items consistent with RSS. Multivariate analysis of these items in a development single-centre cohort (70 patients, 30 % mortality) facilitated development of RSS definitions based on either a bedside or computed severity score. Both scores were subsequently tested in a validation cohort (six centres, 424 patients, 11.6 % mortality). From the Delphi process, the draft definition included evidence of myocardial dysfunction and high blood lactate levels despite high vasopressor treatment. When assessed in the development population, each item was independently associated with the need for extracorporeal life support (ECLS) or death. Resultant bedside and computed septic shock scores had high discriminative power against the need for ECLS or death, with areas under the receiver operating characteristics curve of 0.920 (95 % CI 0.89-0.94), and 0.956 (95 % CI 0.93-0.97), respectively. RSS defined by a bedside score equal to or higher than 2 and a computed score equal to or higher than 3.5 was associated with a significant increase in mortality. This ESPNIC definition of RSS accurately identifies children with the most severe form of septic shock.

  9. A new CERN Alerter mechanism

    CERN Multimedia

    2007-01-01

    A new version of the CERN Alerter used for sending urgent messages was installed in July on all centrally managed NICE computers. This latest version is based on RSS (Really Simple Syndication) and all alerts are now displayed in an Internet Explorer window (see the picture). You can print the window by right-clicking on the alert background and selecting the Print option from the menu. If the message is not urgent, then the alert will only appear as a "balloon" window the following morning or at next logon. Non-Windows computers can also subscribe to this service by using their browser as an RSS reader (Really Simple Syndication). All recent web browsers can act as RSS readers, including Firefox and Safari. Simply subscribe to the following RSS feed: http://cern.ch/cernalerts/alerts.aspx to see all messages sent by the central services. More information on the CERN Alerter is available at: https://cern.ch/winservices/Help/?kbid=060810. Documentation on reading RSS feeds fr...

  10. A new CERN Alerter mechanism

    CERN Multimedia

    2007-01-01

    A new version of the CERN Alerter used for sending urgent messages was installed in July on all centrally managed NICE computers. This latest version is based on RSS (Really Simple Syndication) and all alerts are now displayed in an Internet Explorer window (see picture). You can print the window by right-clicking on the alert background and selecting the Print option from the menu. If the message is not urgent, the alert will only appear as a "balloon" window the following morning or at next log-on. Non-Windows computers can also subscribe to this service by using their browser as an RSS reader. All recent web browsers can act as RSS readers, including Firefox and Safari. Simply subscribe to the following RSS feed: http://cern.ch/cernalerts/alerts.aspx to see all messages sent by the central services. More information on the CERN Alerter is available at: https://cern.ch/winservices/Help/?kbid=060810. Documentation on reading RSS fee...

  11. An Adaptive Handover Prediction Scheme for Seamless Mobility Based Wireless Networks

    Directory of Open Access Journals (Sweden)

    Ali Safa Sadiq

    2014-01-01

    Full Text Available We propose an adaptive handover prediction (AHP scheme for seamless mobility based wireless networks. That is, the AHP scheme incorporates fuzzy logic with AP prediction process in order to lend cognitive capability to handover decision making. Selection metrics, including received signal strength, mobile node relative direction towards the access points in the vicinity, and access point load, are collected and considered inputs of the fuzzy decision making system in order to select the best preferable AP around WLANs. The obtained handover decision which is based on the calculated quality cost using fuzzy inference system is also based on adaptable coefficients instead of fixed coefficients. In other words, the mean and the standard deviation of the normalized network prediction metrics of fuzzy inference system, which are collected from available WLANs are obtained adaptively. Accordingly, they are applied as statistical information to adjust or adapt the coefficients of membership functions. In addition, we propose an adjustable weight vector concept for input metrics in order to cope with the continuous, unpredictable variation in their membership degrees. Furthermore, handover decisions are performed in each MN independently after knowing RSS, direction toward APs, and AP load. Finally, performance evaluation of the proposed scheme shows its superiority compared with representatives of the prediction approaches.

  12. Multibeam smart antenna field trial experiments in mobile radio environments

    Science.gov (United States)

    Perini, Patrick

    1996-01-01

    Several types of high gain multibeam antennas were tested and compared to traditional sector and omni antennas in various mobile radio environments. A vehicle equipped with a mobile transmitter drove in several mobile radio environments while the received signal strength (RSS) was recorded on multiple antenna channels attached to multibeam, sector and omni directional antennas. The RSS data recorded included the fast (rayleigh) fading and was averaged into local means based on the mobile's position/speed. Description of the experiment and analysis of the gain improvement, average RSS, diversity gain are presented.

  13. Survival, causes of death, and prognostic factors in systemic sclerosis: analysis of 947 Brazilian patients.

    Science.gov (United States)

    Sampaio-Barros, Percival D; Bortoluzzo, Adriana B; Marangoni, Roberta G; Rocha, Luiza F; Del Rio, Ana Paula T; Samara, Adil M; Yoshinari, Natalino H; Marques-Neto, João Francisco

    2012-10-01

    To analyze survival, prognostic factors, and causes of death in a large cohort of patients with systemic sclerosis (SSc). From 1991 to 2010, 947 patients with SSc were treated at 2 referral university centers in Brazil. Causes of death were considered SSc-related and non-SSc-related. Multiple logistic regression analysis was used to identify prognostic factors. Survival at 5 and 10 years was estimated using the Kaplan-Meier method. One hundred sixty-eight patients died during the followup. Among the 110 deaths considered related to SSc, there was predominance of lung (48.1%) and heart (24.5%) involvement. Most of the 58 deaths not related to SSc were caused by infection, cardiovascular or cerebrovascular disease, and cancer. Male sex, modified Rodnan skin score (mRSS) > 20, osteoarticular involvement, lung involvement, and renal crisis were the main prognostic factors associated to death. Overall survival rate was 90% for 5 years and 84% for 10 years. Patients presented worse prognosis if they had diffuse SSc (85% vs 92% at 5 yrs, respectively, and 77% vs 87% at 10 yrs, compared to limited SSc), male sex (77% vs 90% at 5 yrs and 64% vs 86% at 10 yrs, compared to female sex), and mRSS > 20 (83% vs 90% at 5 yrs and 66% vs 86% at 10 yrs, compared to mRSS < 20). Survival was worse in male patients with diffuse SSc, and lung and heart involvement represented the main causes of death in this South American series of patients with SSc.

  14. An IMU-Aided Body-Shadowing Error Compensation Method for Indoor Bluetooth Positioning.

    Science.gov (United States)

    Deng, Zhongliang; Fu, Xiao; Wang, Hanhua

    2018-01-20

    Research on indoor positioning technologies has recently become a hotspot because of the huge social and economic potential of indoor location-based services (ILBS). Wireless positioning signals have a considerable attenuation in received signal strength (RSS) when transmitting through human bodies, which would cause significant ranging and positioning errors in RSS-based systems. This paper mainly focuses on the body-shadowing impairment of RSS-based ranging and positioning, and derives a mathematical expression of the relation between the body-shadowing effect and the positioning error. In addition, an inertial measurement unit-aided (IMU-aided) body-shadowing detection strategy is designed, and an error compensation model is established to mitigate the effect of body-shadowing. A Bluetooth positioning algorithm with body-shadowing error compensation (BP-BEC) is then proposed to improve both the positioning accuracy and the robustness in indoor body-shadowing environments. Experiments are conducted in two indoor test beds, and the performance of both the BP-BEC algorithm and the algorithms without body-shadowing error compensation (named no-BEC) is evaluated. The results show that the BP-BEC outperforms the no-BEC by about 60.1% and 73.6% in terms of positioning accuracy and robustness, respectively. Moreover, the execution time of the BP-BEC algorithm is also evaluated, and results show that the convergence speed of the proposed algorithm has an insignificant effect on real-time localization.

  15. An Effective Recommender Algorithm for Cold-Start Problem in Academic Social Networks

    Directory of Open Access Journals (Sweden)

    Vala Ali Rohani

    2014-01-01

    Full Text Available Abundance of information in recent years has become a serious challenge for web users. Recommender systems (RSs have been often utilized to alleviate this issue. RSs prune large information spaces to recommend the most relevant items to users by considering their preferences. Nonetheless, in situations where users or items have few opinions, the recommendations cannot be made properly. This notable shortcoming in practical RSs is called cold-start problem. In the present study, we propose a novel approach to address this problem by incorporating social networking features. Coined as enhanced content-based algorithm using social networking (ECSN, the proposed algorithm considers the submitted ratings of faculty mates and friends besides user’s own preferences. The effectiveness of ECSN algorithm was evaluated by implementing it in MyExpert, a newly designed academic social network (ASN for academics in Malaysia. Real feedbacks from live interactions of MyExpert users with the recommended items are recorded for 12 consecutive weeks in which four different algorithms, namely, random, collaborative, content-based, and ECSN were applied every three weeks. The empirical results show significant performance of ECSN in mitigating the cold-start problem besides improving the prediction accuracy of recommendations when compared with other studied recommender algorithms.

  16. On the effect of oxygen or copper(II) in radiation-induced degradation of DNA in the presence of thiols

    International Nuclear Information System (INIS)

    Pruetz, W.A.; Moenig, Hans

    1987-01-01

    Degradiation of DNA when γ-irradiated in aqueous solutions containing cysteine can be efficiently enhanced not only with oxygen, but to the same extent also with Cu 2+ ions under hypoxic conditions. The result can be explained by 'self-repair' in this sytem due to recombination of DNA radical with RSS radical - R intermediates, and repair inhibition by oxygen or copper involving RSS radical - R scavenging. It is emphasized that oxygen enhancement in DNA-thiol systems may occur not only by peroxidation, via defect fixation (DNA-O radical 2 ) or thiol activation (RS-O radical 2 ), but also by the well-established inactivation of RSS radical - R by oxygen. There is evidence also from literature data for a correlation between oxygen enhancement and RSS radical - R stability, which varies with thiol concentration, pH and thiol structure. (author)

  17. Helical tomotherapy with dynamic running-start-stop delivery compared to conventional tomotherapy delivery

    International Nuclear Information System (INIS)

    Rong, Yi; Chen, Yu; Lu, Weiguo; Shang, Lu; Zuo, Li; Chen, Quan

    2014-01-01

    Purpose: Despite superior target dose uniformity, helical tomotherapy ® (HT) may involve a trade-off between longitudinal dose conformity and beam-on time (BOT), due to the limitation of only three available jaw sizes with the conventional HT (1.0, 2.5, and 5.0 cm). The recently introduced dynamic running-start-stop (RSS) delivery allows smaller jaw opening at the superior and inferior ends of the target when a sharp penumbra is needed. This study compared the dosimetric performance of RSS delivery with the fixed jaw HT delivery. Methods: Twenty patient cases were selected and deidentified prior to treatment planning, including 16 common clinical cases (brain, head and neck (HN), lung, and prostate) and four special cases of whole brain with hippocampus avoidance (WBHA) that require a high degree of dose modulation. HT plans were generated for common clinical cases using the fixed 2.5 cm jaw width (HT2.5) and WBHA cases using 1.0 cm (HT1.0). The jaw widths for RSS were preset with a larger size (RSS5.0 vs HT2.5 and RSS2.5 vs HT1.0). Both delivery techniques were planned based on identical contours, prescriptions, and planning objectives. Dose indices for targets and critical organs were compared using dose-volume histograms, BOT, and monitor units. Results: The average BOT was reduced from 4.8 min with HT2.5 to 2.5 min with RSS5.0. Target dose homogeneity with RSS5.0 was shown comparable to HT2.5 for common clinical sites. Superior normal tissue sparing was observed in RSS5.0 for optic nerves and optic chiasm in brain and HN cases. RSS5.0 demonstrated improved dose sparing for cord and esophagus in lung cases, as well as penile bulb in prostate cases. The mean body dose was comparable for both techniques. For the WBHA cases, the target homogeneity was significantly degraded in RSS2.5 without distinct dose sparing for hippocampus, compared to HT1.0. Conclusions: Compared to the fixed jaw HT delivery, RSS combined with a larger jaw width provides faster treatment

  18. Helical tomotherapy with dynamic running-start-stop delivery compared to conventional tomotherapy delivery

    Energy Technology Data Exchange (ETDEWEB)

    Rong, Yi, E-mail: yi.rong@osumc.edu [Department of Radiation Oncology, The Ohio State University Wexner Medical Center, Columbus, Ohio 43210 (United States); Chen, Yu; Lu, Weiguo [21st Century Oncology, Madison, Wisconsin 53719 (United States); Shang, Lu [Guangxi Polytechnic of Construction and Technology, Nanning (China); Zuo, Li [Radiologic Sciences and Respiratory Therapy Division, School of Health and Rehabilitation Sciences, The Ohio State University College of Medicine, Columbus, Ohio 43210 (United States); Chen, Quan [Department of Radiation Oncology, University of Virginia, Charlottesville, Virginia 22904 (United States)

    2014-05-15

    Purpose: Despite superior target dose uniformity, helical tomotherapy{sup ®} (HT) may involve a trade-off between longitudinal dose conformity and beam-on time (BOT), due to the limitation of only three available jaw sizes with the conventional HT (1.0, 2.5, and 5.0 cm). The recently introduced dynamic running-start-stop (RSS) delivery allows smaller jaw opening at the superior and inferior ends of the target when a sharp penumbra is needed. This study compared the dosimetric performance of RSS delivery with the fixed jaw HT delivery. Methods: Twenty patient cases were selected and deidentified prior to treatment planning, including 16 common clinical cases (brain, head and neck (HN), lung, and prostate) and four special cases of whole brain with hippocampus avoidance (WBHA) that require a high degree of dose modulation. HT plans were generated for common clinical cases using the fixed 2.5 cm jaw width (HT2.5) and WBHA cases using 1.0 cm (HT1.0). The jaw widths for RSS were preset with a larger size (RSS5.0 vs HT2.5 and RSS2.5 vs HT1.0). Both delivery techniques were planned based on identical contours, prescriptions, and planning objectives. Dose indices for targets and critical organs were compared using dose-volume histograms, BOT, and monitor units. Results: The average BOT was reduced from 4.8 min with HT2.5 to 2.5 min with RSS5.0. Target dose homogeneity with RSS5.0 was shown comparable to HT2.5 for common clinical sites. Superior normal tissue sparing was observed in RSS5.0 for optic nerves and optic chiasm in brain and HN cases. RSS5.0 demonstrated improved dose sparing for cord and esophagus in lung cases, as well as penile bulb in prostate cases. The mean body dose was comparable for both techniques. For the WBHA cases, the target homogeneity was significantly degraded in RSS2.5 without distinct dose sparing for hippocampus, compared to HT1.0. Conclusions: Compared to the fixed jaw HT delivery, RSS combined with a larger jaw width provides faster

  19. Research on website construction based on website group platform of Chengdu sport institution

    Science.gov (United States)

    Hu, Zunyu

    2018-04-01

    This paper describes the necessity of website construction based on the website group of Chengdu sport institute, and discusses the technical features of the website group, Based on the website group platform architecture, the key technologies such as Web Service, AJAX, RSS and other key technologies are used to realize the construction of the website. Based on the website group platform architecture of the site, it effectively solves the information isolated island between the sites, and realizes the information sharing and resource integration. It is also more convenient that site and other sites have composed of site group integrated operation and maintenance.

  20. Sensitivity analysis of the reactor safety study. Final report

    International Nuclear Information System (INIS)

    Parkinson, W.J.; Rasmussen, N.C.; Hinkle, W.D.

    1979-01-01

    The Reactor Safety Study (RSS) or Wash 1400 developed a methodology estimating the public risk from light water nuclear reactors. In order to give further insights into this study, a sensitivity analysis has been performed to determine the significant contributors to risk for both the PWR and BWR. The sensitivity to variation of the point values of the failure probabilities reported in the RSS was determined for the safety systems identified therein, as well as for many of the generic classes from which individual failures contributed to system failures. Increasing as well as decreasing point values were considered. An analysis of the sensitivity to increasing uncertainty in system failure probabilities was also performed. The sensitivity parameters chosen were release category probabilities, core melt probability, and the risk parameters of early fatalities, latent cancers and total property damage. The latter three are adequate for describing all public risks identified in the RSS. The results indicate reductions of public risk by less than a factor of two for factor reductions in system or generic failure probabilities as high as one hundred. There also appears to be more benefit in monitoring the most sensitive systems to verify adherence to RSS failure rates than to backfitting present reactors. The sensitivity analysis results do indicate, however, possible benefits in reducing human error rates

  1. Optimal Reference Strain Structure for Studying Dynamic Responses of Flexible Rockets

    Science.gov (United States)

    Tsushima, Natsuki; Su, Weihua; Wolf, Michael G.; Griffin, Edwin D.; Dumoulin, Marie P.

    2017-01-01

    In the proposed paper, the optimal design of reference strain structures (RSS) will be performed targeting for the accurate observation of the dynamic bending and torsion deformation of a flexible rocket. It will provide the detailed description of the finite-element (FE) model of a notional flexible rocket created in MSC.Patran. The RSS will be attached longitudinally along the side of the rocket and to track the deformation of the thin-walled structure under external loads. An integrated surrogate-based multi-objective optimization approach will be developed to find the optimal design of the RSS using the FE model. The Kriging method will be used to construct the surrogate model. For the data sampling and the performance evaluation, static/transient analyses will be performed with MSC.Natran/Patran. The multi-objective optimization will be solved with NSGA-II to minimize the difference between the strains of the launch vehicle and RSS. Finally, the performance of the optimal RSS will be evaluated by checking its strain-tracking capability in different numerical simulations of the flexible rocket.

  2. Sedative effects of oral pregabalin premedication on intravenous sedation using propofol target-controlled infusion.

    Science.gov (United States)

    Karube, Noriko; Ito, Shinichi; Sako, Saori; Hirokawa, Jun; Yokoyama, Takeshi

    2017-08-01

    The sedative effects of pregabalin during perioperative period have not been sufficiently characterized. The aim of this study was to verify the sedative effects of premedication with pregabalin on intravenous sedation (IVS) using propofol and also to assess the influences of this agent on circulation, respiration, and postanesthetic complications. Ten healthy young volunteers underwent 1 h of IVS using propofol, three times per subject, on separate days (first time, no pregabalin; second time, pregabalin 100 mg; third time, pregabalin 200 mg). The target blood concentration (C T ) of propofol was increased in a stepwise fashion based on the bispectral index (BIS) value. Ramsay's sedation score (RSS) was determined at each propofol C T . Propofol C T was analyzed at each sedation level. Circulation and respiration during IVS and complications were also verified. Propofol C T was reduced at BIS values of 60 and 70 in both premedicated groups (100 mg: p = 0.043 and 0.041; 200 mg: p = 0.004 and 0.016, respectively) and at a BIS value of 80 in the pregabalin 200 mg group (p < 0.001). Propofol C T was decreased at RSS 4-6 in the pregabalin 100 mg group (RSS 4: p = 0.047; RSS 5: p = 0.007; RSS 6: p = 0.014), and at RSS 3-6 in the pregabalin 200 mg group (RSS 3-5: p < 0.001; RSS 6: p = 0.002). We conclude that oral premedication with pregabalin reduces the amount of propofol required to obtain an acceptable and adequate sedation level.

  3. Centroid Localization of Uncooperative Nodes in Wireless Networks Using a Relative Span Weighting Method

    Directory of Open Access Journals (Sweden)

    Christine Laurendeau

    2010-01-01

    Full Text Available Increasingly ubiquitous wireless technologies require novel localization techniques to pinpoint the position of an uncooperative node, whether the target is a malicious device engaging in a security exploit or a low-battery handset in the middle of a critical emergency. Such scenarios necessitate that a radio signal source be localized by other network nodes efficiently, using minimal information. We propose two new algorithms for estimating the position of an uncooperative transmitter, based on the received signal strength (RSS of a single target message at a set of receivers whose coordinates are known. As an extension to the concept of centroid localization, our mechanisms weigh each receiver's coordinates based on the message's relative RSS at that receiver, with respect to the span of RSS values over all receivers. The weights may decrease from the highest RSS receiver either linearly or exponentially. Our simulation results demonstrate that for all but the most sparsely populated wireless networks, our exponentially weighted mechanism localizes a target node within the regulations stipulated for emergency services location accuracy.

  4. Military Base Realignments and Closures: Process for Reusing Property for Homeless Assistance Needs Improvements

    Science.gov (United States)

    2015-03-01

    information in the Federal Register. The LRA then must advertise the surplus property availability in a newspaper of general circulation within the vicinity...of the base. The advertisement must include the period, required to be between 90 and 180 days following the advertisement , during which it will...order. Call for additional information. Connect with GAO on Facebook , Flickr, Twitter, and YouTube. Subscribe to our RSS Feeds or E-mail Updates. Listen

  5. rss.html

    Science.gov (United States)

    ... Incompatibility Stillbirth Teenage Pregnancy Tubal Ligation Tumors and Pregnancy Twins, Triplets, Multiple Births Vasectomy Substance Abuse Problems Alcohol Alcohol Use Disorder (AUD) Treatment Alcoholism and Alcohol Abuse Anabolic Steroids Club Drugs Cocaine ...

  6. Radiographic skeletal survey and radionuclide bone scan in Langerhans cell histiocytosis of bone

    International Nuclear Information System (INIS)

    Nieuwenhuyse, J.P. van; Clapuyt, P.; Malghem, J.; Everarts, P.; Melin, J.; Pauwels, S.; Brichard, B.; Ninane, J.; Vermylen, C.; Cornu, G.

    1996-01-01

    Background. The lack of a consensus in the literature on the imaging strategy in Langerhans cell histiocytosis (LCH) bone lesions in childhood. Objective. To evaluate the relative value of radionuclide bone scan (RBS) and radiographic skeletal survey (RSS) in the detection of LCH bone lesions, both in the initial work-up of the disease and during the follow-up period. Materials and methods. Ten children with bone lesions evaluated by means of RSS and RBS in a retrospective study (1984-1993). Results. Fifty radiologically and/or scintigraphically abnormal foci were detected: 27 anomalies in the initial work-up (12 by both RSS and RBS, 8 by RSS only and 7 by RBS only) and 23 additional anomalies during follow-up (10 by both RSS and RBS, 10 by RSS only and 3 by RBS only). RSS+/RBS- lesions (n = 18) are more frequently encountered in the skull (P = 0.038), and more frequently lack radiologic signs of osteoblastic activity (P = 0.020), than RSS+/RBS+ lesions (n = 22). RSS-/RBS+ abnormalities (n = 10) were most frequently insignificant. Conclusion. In the initial work-up both RSS and RBS should be carried out, while in the follow-up only RSS should be performed. (orig.). With 2 figs., 4 tabs

  7. Image Classification of Ribbed Smoked Sheet using Learning Vector Quantization

    Science.gov (United States)

    Rahmat, R. F.; Pulungan, A. F.; Faza, S.; Budiarto, R.

    2017-01-01

    Natural rubber is an important export commodity in Indonesia, which can be a major contributor to national economic development. One type of rubber used as rubber material exports is Ribbed Smoked Sheet (RSS). The quantity of RSS exports depends on the quality of RSS. RSS rubber quality has been assigned in SNI 06-001-1987 and the International Standards of Quality and Packing for Natural Rubber Grades (The Green Book). The determination of RSS quality is also known as the sorting process. In the rubber factones, the sorting process is still done manually by looking and detecting at the levels of air bubbles on the surface of the rubber sheet by naked eyes so that the result is subjective and not so good. Therefore, a method is required to classify RSS rubber automatically and precisely. We propose some image processing techniques for the pre-processing, zoning method for feature extraction and Learning Vector Quantization (LVQ) method for classifying RSS rubber into two grades, namely RSS1 and RSS3. We used 120 RSS images as training dataset and 60 RSS images as testing dataset. The result shows that our proposed method can give 89% of accuracy and the best perform epoch is in the fifteenth epoch.

  8. Strong Horses-Systems Thinking-Strategic Communication

    Science.gov (United States)

    2009-04-30

    between emerging technologies and violent extremist operating in the global information environment. Thomas Friedman, New York Times columnist ...have a government that works effectively for them and with them.160 Of note, the White House website provides RSS (Really Simple Syndication ) web

  9. An IMU-Aided Body-Shadowing Error Compensation Method for Indoor Bluetooth Positioning

    Directory of Open Access Journals (Sweden)

    Zhongliang Deng

    2018-01-01

    Full Text Available Research on indoor positioning technologies has recently become a hotspot because of the huge social and economic potential of indoor location-based services (ILBS. Wireless positioning signals have a considerable attenuation in received signal strength (RSS when transmitting through human bodies, which would cause significant ranging and positioning errors in RSS-based systems. This paper mainly focuses on the body-shadowing impairment of RSS-based ranging and positioning, and derives a mathematical expression of the relation between the body-shadowing effect and the positioning error. In addition, an inertial measurement unit-aided (IMU-aided body-shadowing detection strategy is designed, and an error compensation model is established to mitigate the effect of body-shadowing. A Bluetooth positioning algorithm with body-shadowing error compensation (BP-BEC is then proposed to improve both the positioning accuracy and the robustness in indoor body-shadowing environments. Experiments are conducted in two indoor test beds, and the performance of both the BP-BEC algorithm and the algorithms without body-shadowing error compensation (named no-BEC is evaluated. The results show that the BP-BEC outperforms the no-BEC by about 60.1% and 73.6% in terms of positioning accuracy and robustness, respectively. Moreover, the execution time of the BP-BEC algorithm is also evaluated, and results show that the convergence speed of the proposed algorithm has an insignificant effect on real-time localization.

  10. A Novel Risk Scoring System Reliably Predicts Readmission Following Pancreatectomy

    Science.gov (United States)

    Valero, Vicente; Grimm, Joshua C.; Kilic, Arman; Lewis, Russell L.; Tosoian, Jeffrey J.; He, Jin; Griffin, James; Cameron, John L.; Weiss, Matthew J.; Vollmer, Charles M.; Wolfgang, Christopher L.

    2015-01-01

    Background Postoperative readmissions have been proposed by Medicare as a quality metric and may impact provider reimbursement. Since readmission following pancreatectomy is common, we sought to identify factors associated with readmission in order to establish a predictive risk scoring system (RSS). Study Design A retrospective analysis of 2,360 pancreatectomies performed at nine, high-volume pancreatic centers between 2005 and 2011 was performed. Forty-five factors strongly associated with readmission were identified. To derive and validate a RSS, the population was randomly divided into two cohorts in a 4:1 fashion. A multivariable logistic regression model was constructed and scores were assigned based on the relative odds ratio of each independent predictor. A composite Readmission After Pancreatectomy (RAP) score was generated and then stratified to create risk groups. Results Overall, 464 (19.7%) patients were readmitted within 90-days. Eight pre- and postoperative factors, including prior myocardial infarction (OR 2.03), ASA Class ≥ 3 (OR 1.34), dementia (OR 6.22), hemorrhage (OR 1.81), delayed gastric emptying (OR 1.78), surgical site infection (OR 3.31), sepsis (OR 3.10) and short length of stay (OR 1.51), were independently predictive of readmission. The 32-point RAP score generated from the derivation cohort was highly predictive of readmission in the validation cohort (AUC 0.72). The low (0-3), intermediate (4-7) and high risk (>7) groups correlated to 11.7%, 17.5% and 45.4% observed readmission rates, respectively (preadmission following pancreatectomy. Identification of patients with increased risk of readmission using the RAP score will allow efficient resource allocation aimed to attenuate readmission rates. It also has potential to serve as a new metric for comparative research and quality assessment. PMID:25797757

  11. A functional analysis of the spacer of V(DJ recombination signal sequences.

    Directory of Open Access Journals (Sweden)

    Alfred Ian Lee

    2003-10-01

    Full Text Available During lymphocyte development, V(DJ recombination assembles antigen receptor genes from component V, D, and J gene segments. These gene segments are flanked by a recombination signal sequence (RSS, which serves as the binding site for the recombination machinery. The murine Jbeta2.6 gene segment is a recombinationally inactive pseudogene, but examination of its RSS reveals no obvious reason for its failure to recombine. Mutagenesis of the Jbeta2.6 RSS demonstrates that the sequences of the heptamer, nonamer, and spacer are all important. Strikingly, changes solely in the spacer sequence can result in dramatic differences in the level of recombination. The subsequent analysis of a library of more than 4,000 spacer variants revealed that spacer residues of particular functional importance are correlated with their degree of conservation. Biochemical assays indicate distinct cooperation between the spacer and heptamer/nonamer along each step of the reaction pathway. The results suggest that the spacer serves not only to ensure the appropriate distance between the heptamer and nonamer but also regulates RSS activity by providing additional RAG:RSS interaction surfaces. We conclude that while RSSs are defined by a "digital" requirement for absolutely conserved nucleotides, the quality of RSS function is determined in an "analog" manner by numerous complex interactions between the RAG proteins and the less-well conserved nucleotides in the heptamer, the nonamer, and, importantly, the spacer. Those modulatory effects are accurately predicted by a new computational algorithm for "RSS information content." The interplay between such binary and multiplicative modes of interactions provides a general model for analyzing protein-DNA interactions in various biological systems.

  12. A functional analysis of the spacer of V(D)J recombination signal sequences.

    Science.gov (United States)

    Lee, Alfred Ian; Fugmann, Sebastian D; Cowell, Lindsay G; Ptaszek, Leon M; Kelsoe, Garnett; Schatz, David G

    2003-10-01

    During lymphocyte development, V(D)J recombination assembles antigen receptor genes from component V, D, and J gene segments. These gene segments are flanked by a recombination signal sequence (RSS), which serves as the binding site for the recombination machinery. The murine Jbeta2.6 gene segment is a recombinationally inactive pseudogene, but examination of its RSS reveals no obvious reason for its failure to recombine. Mutagenesis of the Jbeta2.6 RSS demonstrates that the sequences of the heptamer, nonamer, and spacer are all important. Strikingly, changes solely in the spacer sequence can result in dramatic differences in the level of recombination. The subsequent analysis of a library of more than 4,000 spacer variants revealed that spacer residues of particular functional importance are correlated with their degree of conservation. Biochemical assays indicate distinct cooperation between the spacer and heptamer/nonamer along each step of the reaction pathway. The results suggest that the spacer serves not only to ensure the appropriate distance between the heptamer and nonamer but also regulates RSS activity by providing additional RAG:RSS interaction surfaces. We conclude that while RSSs are defined by a "digital" requirement for absolutely conserved nucleotides, the quality of RSS function is determined in an "analog" manner by numerous complex interactions between the RAG proteins and the less-well conserved nucleotides in the heptamer, the nonamer, and, importantly, the spacer. Those modulatory effects are accurately predicted by a new computational algorithm for "RSS information content." The interplay between such binary and multiplicative modes of interactions provides a general model for analyzing protein-DNA interactions in various biological systems.

  13. Alfalfa dwarf cytorhabdovirus P protein is a local and systemic RNA silencing supressor which inhibits programmed RISC activity and prevents transitive amplification of RNA silencing.

    Science.gov (United States)

    Bejerman, Nicolás; Mann, Krin S; Dietzgen, Ralf G

    2016-09-15

    Plants employ RNA silencing as an innate defense mechanism against viruses. As a counter-defense, plant viruses have evolved to express RNA silencing suppressor proteins (RSS), which target one or more steps of the silencing pathway. In this study, we show that the phosphoprotein (P) encoded by the negative-sense RNA virus alfalfa dwarf virus (ADV), a species of the genus Cytorhabdovirus, family Rhabdoviridae, is a suppressor of RNA silencing. ADV P has a relatively weak local RSS activity, and does not prevent siRNA accumulation. On the other hand, ADV P strongly suppresses systemic RNA silencing, but does not interfere with the short-distance spread of silencing, which is consistent with its lack of inhibition of siRNA accumulation. The mechanism of suppression appears to involve ADV P binding to RNA-induced silencing complex proteins AGO1 and AGO4 as shown in protein-protein interaction assays when ectopically expressed. In planta, we demonstrate that ADV P likely functions by inhibiting miRNA-guided AGO1 cleavage and prevents transitive amplification by repressing the production of secondary siRNAs. As recently described for lettuce necrotic yellows cytorhabdovirus P, but in contrast to other viral RSS known to disrupt AGO activity, ADV P sequence does not contain any recognizable GW/WG or F-box motifs, which suggests that cytorhabdovirus P proteins may use alternative motifs to bind to AGO proteins. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

  14. Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene

    International Nuclear Information System (INIS)

    Chin, Bridgid Lai Fui; Yusup, Suzana; Al Shoaibi, Ahmed; Kannan, Pravin; Srinivasakannan, Chandrasekar; Sulaiman, Shaharin Anwar

    2014-01-01

    Highlights: • Co-pyrolysis of biomass and plastic waste in thermogravimetric analyzer. • Investigation of thermal degradation behavior in different feedstocks. • Synergistic effect of the biomass and plastic waste mixture is investigated. • Kinetic parameters using one step integral method are determined. - Abstract: This paper investigates the thermal degradation behavior of rubber seed shell (RSS), high density polyethylene (HDPE), and the HDPE/RSS mixtures (0.2:0.8 weight ratio) using thermogravimetric analyzer under non-isothermal condition in argon atmosphere at flowrate of 100 ml min −1 . Cellulose, hemicellulose, and lignin are also analyzed in this study for comparison of pyrolysis behavior with RSS. The experiments were conducted at different heating rates of 10, 20, 30, and 50 K min −1 in the temperature range of 323–1173 K. The kinetic data is generated based on first order rate of reaction. It is observed that the thermal degradation behavior of the main components in biomass such as hemicellulose, cellulose, and lignin differs during pyrolysis process due to the structural differences that leads to distinctive pathways of degradation of feedstock. It is found that there are one, two, and three stages of decomposition occurring in HDPE, RSS, and HDPE/RSS mixtures respectively during the pyrolysis process. The remaining solid residue increases with an increase in heating rate regardless of the type of samples used. The activation energies (E A ) for RSS, HDPE, HDPE/RSS mixtures are 46.94–63.21, 242.13–278.14, and 49.14–83.11 kJ mol −1 respectively for the range of heating rate studied

  15. Different goodness of fit tests for Rayleigh distribution in ranked set sampling

    Directory of Open Access Journals (Sweden)

    Amer Al-Omari

    2016-03-01

    Full Text Available In this paper, different goodness of fit tests for the Rayleigh distribution are considered based on simple random sampling (SRS and ranked set sampling (RSS techniques. The performance of the suggested estimators is evaluated in terms of the power of the tests by using Monte Carlo simulation. It is found that the suggested RSS tests perform better than their counterparts  in SRS.

  16. From conventional software based systems to knowledge based systems

    International Nuclear Information System (INIS)

    Bologna, S.

    1995-01-01

    Even if todays nuclear power plants have a very good safety record, there is a continuous search for still improving safety. One direction of this effort address operational safety, trying to improve the handling of disturbances and accidents partly by further automation, partly by creating a better control room environment, providing the operator with intelligent support systems to help in the decision making process. Introduction of intelligent computerised operator support systems has proved to be an efficient way of improving the operators performance. A number of systems have been developed worldwide, assisting in tasks like process fault detection and diagnosis, selection and implementation of proper remedial actions. Unfortunately, the use of Knowledge Based Systems (KBSs), introduces a new dimension to the problem of the licensing process. KBSs, despite the different technology employed, are still nothing more than a computer program. Unfortunately, quite a few people building knowledge based systems seem to ignore the many good programming practices that have evolved over the years for producing traditional computer programs. In this paper the author will try to point out similarities and differences between conventional software based systems, and knowledge based systems, introducing also the concept of model based reasoning. (orig.) (25 refs., 2 figs.)

  17. Plant balance model for RELAP/SCDAPSIM; Modelo de balance de planta para RELAP/SCDAPSIM

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza M, R. [Consultor independiente, Ciudad de Mexico (Mexico); Filio L, C. [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, 07738 Ciudad de Mexico (Mexico); Araiza M, E.; Ortiz V, J., E-mail: rafael_mendozam_esfm@live.com.mx [ININ, Carretera Mexico-Touca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2017-09-15

    In this work we developed an integral model for a nuclear power plant and have a more general picture of what happens in both the Nuclear Steam Supply System (NSSS) and the Balance of Plant (Bop) system during abnormal events that are presented in operation. RELAP/SCDAPSIM (RSS) is a computation code of the type of best estimate that can simulate the transient and accident behavior of a nuclear installation. The development of a Bop model for RSS can result in the simulation of transients such as turbine trip due to loss of vacuum in the main steam condenser. This work shows the development of models of the Bop main components for the RSS code, such as the set of high and low pressure turbines, as well as their steam extractions to the feed water heaters, the main steam condenser, a feed water heater and the condensate and water feed pumps. This new model of the Plant Balance system was then coupled to the NSSS model that is already in RSS. First, results of the steady state with this new integral model are show, to later show results of the transients simulation: 1) turbine trip due to loss of vacuum in the main steam condenser; 2) loss of condensate pumps; and 3) failure of the feed water heater. (Author)

  18. Plant balance model for RELAP/SCDAPSIM

    International Nuclear Information System (INIS)

    Mendoza M, R.; Filio L, C.; Araiza M, E.; Ortiz V, J.

    2017-09-01

    In this work we developed an integral model for a nuclear power plant and have a more general picture of what happens in both the Nuclear Steam Supply System (NSSS) and the Balance of Plant (Bop) system during abnormal events that are presented in operation. RELAP/SCDAPSIM (RSS) is a computation code of the type of best estimate that can simulate the transient and accident behavior of a nuclear installation. The development of a Bop model for RSS can result in the simulation of transients such as turbine trip due to loss of vacuum in the main steam condenser. This work shows the development of models of the Bop main components for the RSS code, such as the set of high and low pressure turbines, as well as their steam extractions to the feed water heaters, the main steam condenser, a feed water heater and the condensate and water feed pumps. This new model of the Plant Balance system was then coupled to the NSSS model that is already in RSS. First, results of the steady state with this new integral model are show, to later show results of the transients simulation: 1) turbine trip due to loss of vacuum in the main steam condenser; 2) loss of condensate pumps; and 3) failure of the feed water heater. (Author)

  19. The Cucumber vein yellowing virus silencing suppressor P1b can functionally replace HCPro in Plum pox virus infection in a host-specific manner.

    Science.gov (United States)

    Carbonell, Alberto; Dujovny, Gabriela; García, Juan Antonio; Valli, Adrian

    2012-02-01

    Plant viruses of the genera Potyvirus and Ipomovirus (Potyviridae family) use unrelated RNA silencing suppressors (RSS) to counteract antiviral RNA silencing responses. HCPro is the RSS of Potyvirus spp., and its activity is enhanced by the upstream P1 protein. Distinctively, the ipomovirus Cucumber vein yellowing virus (CVYV) lacks HCPro but contains two P1 copies in tandem (P1aP1b), the second of which functions as RSS. Using chimeras based on the potyvirus Plum pox virus (PPV), we found that P1b can functionally replace HCPro in potyviral infections of Nicotiana plants. Interestingly, P1a, the CVYV protein homologous to potyviral P1, disrupted the silencing suppression activity of P1b and reduced the infection efficiency of PPV in Nicotiana benthamiana. Testing the influence of RSS in host specificity, we found that a P1b-expressing chimera poorly infected PPV's natural host, Prunus persica. Conversely, P1b conferred on PPV chimeras the ability to replicate locally in cucumber, CVYV's natural host. The deleterious effect of P1a on PPV infection is host dependent, because the P1aP1b-expressing PPV chimera accumulated in cucumber to higher levels than PPV expressing P1b alone. These results demonstrate that a potyvirus can use different RSS, and that particular RSS and upstream P1-like proteins contribute to defining the virus host range.

  20. A fast combination method in DSmT and its application to recommender system.

    Directory of Open Access Journals (Sweden)

    Yilin Dong

    Full Text Available In many applications involving epistemic uncertainties usually modeled by belief functions, it is often necessary to approximate general (non-Bayesian basic belief assignments (BBAs to subjective probabilities (called Bayesian BBAs. This necessity occurs if one needs to embed the fusion result in a system based on the probabilistic framework and Bayesian inference (e.g. tracking systems, or if one needs to make a decision in the decision making problems. In this paper, we present a new fast combination method, called modified rigid coarsening (MRC, to obtain the final Bayesian BBAs based on hierarchical decomposition (coarsening of the frame of discernment. Regarding this method, focal elements with probabilities are coarsened efficiently to reduce computational complexity in the process of combination by using disagreement vector and a simple dichotomous approach. In order to prove the practicality of our approach, this new approach is applied to combine users' soft preferences in recommender systems (RSs. Additionally, in order to make a comprehensive performance comparison, the proportional conflict redistribution rule #6 (PCR6 is regarded as a baseline in a range of experiments. According to the results of experiments, MRC is more effective in accuracy of recommendations compared to original Rigid Coarsening (RC method and comparable in computational time.

  1. A fast combination method in DSmT and its application to recommender system.

    Science.gov (United States)

    Dong, Yilin; Li, Xinde; Liu, Yihai

    2018-01-01

    In many applications involving epistemic uncertainties usually modeled by belief functions, it is often necessary to approximate general (non-Bayesian) basic belief assignments (BBAs) to subjective probabilities (called Bayesian BBAs). This necessity occurs if one needs to embed the fusion result in a system based on the probabilistic framework and Bayesian inference (e.g. tracking systems), or if one needs to make a decision in the decision making problems. In this paper, we present a new fast combination method, called modified rigid coarsening (MRC), to obtain the final Bayesian BBAs based on hierarchical decomposition (coarsening) of the frame of discernment. Regarding this method, focal elements with probabilities are coarsened efficiently to reduce computational complexity in the process of combination by using disagreement vector and a simple dichotomous approach. In order to prove the practicality of our approach, this new approach is applied to combine users' soft preferences in recommender systems (RSs). Additionally, in order to make a comprehensive performance comparison, the proportional conflict redistribution rule #6 (PCR6) is regarded as a baseline in a range of experiments. According to the results of experiments, MRC is more effective in accuracy of recommendations compared to original Rigid Coarsening (RC) method and comparable in computational time.

  2. Tenacibaculum ascidiaceicola sp. nov., isolated from the golden sea squirt Halocynthia aurantium.

    Science.gov (United States)

    Kim, Young-Ok; Park, In-Suk; Park, Sooyeon; Nam, Bo-Hye; Park, Ji-Min; Kim, Dong-Gyun; Yoon, Jung-Hoon

    2016-03-01

    A Gram-stain-negative, non-flagellated, non-spore-forming bacterial strain motile by gliding, designated RSS1-6T, was isolated from a golden sea squirt Halocynthia aurantium and its taxonomic position was investigated by using a polyphasic approach. Strain RSS1-6T grew optimally at 30-37 °C and in the presence of 1.0-4.0 % (w/v) NaCl. Phylogenetic trees based on 16S rRNA gene sequences showed that strain RSS1-6T fell within the clade comprising species of the genus Tenacibaculum, clustering with the type strains of Tenacibaculum discolor, Tenacibaculum litoreum and Tenacibaculum gallaicum with which it exhibited 16S rRNA gene sequence similarity values of 98.5-99.5 %. Strain RSS1-6T contained MK-6 as the predominant menaquinone and iso-C15 : 0, iso-C17 : 0 3-OH and summed feature 3 (C16 : 1ω7c and/or C16 : 1ω6c) as the major fatty acids. The major polar lipids of strain RSS1-6T were phosphatidylethanolamine, two unidentified lipids, one unidentified aminophospholipid and one unidentified glycolipid. The DNA G+C content was 32.5 mol% and the mean DNA-DNA relatedness values with the type strains of T. discolor, T. litoreum and T. gallaicum were 17.3-25.2 %. The differential phenotypic properties, together with the phylogenetic and genetic distinctiveness, revealed that strain RSS1-6T is separated from other recognized species of the genus Tenacibaculum. On the basis of the data presented, strain RSS1-6T is considered to represent a novel species of the genus Tenacibaculum, for which the name Tenacibaculum ascidiaceicola sp. nov. is proposed. The type strain is RSS1-6T ( = KCTC 42702T = NBRC 111225T).

  3. INDOOR LOCALIZATION USING WI-FI BASED FINGERPRINTING AND TRILATERATION TECHIQUES FOR LBS APPLICATIONS

    Directory of Open Access Journals (Sweden)

    S. Chan

    2012-06-01

    Full Text Available The past few years have seen wide spread adoption of outdoor positioning services, mainly GPS, being incorporated into everyday devices such as smartphones and tablets. While outdoor positioning has been well received by the public, its indoor counterpart has been mostly limited to private use due to its higher costs and complexity for setting up the proper environment. The objective of this research is to provide an affordable mean for indoor localization using wireless local area network (WLAN Wi-Fi technology. We combined two different Wi-Fi approaches to locate a user. The first method involves the use of matching the pre-recorded received signal strength (RSS from nearby access points (AP, to the data transmitted from the user on the fly. This is commonly known as "fingerprint matching". The second approach is a distance-based trilateration approach using three known AP coordinates detected on the user's device to derive the position. The combination of the two steps enhances the accuracy of the user position in an indoor environment allowing location-based services (LBS such as mobile augmented reality (MAR to be deployed more effectively in the indoor environment. The mapping of the RSS map can also prove useful to IT planning personnel for covering locations with no Wi-Fi coverage (ie. dead spots. The experiments presented in this research helps provide a foundation for the integration of indoor with outdoor positioning to create a seamless transition experience for users.

  4. Indoor Localization Using Wi-Fi Based Fingerprinting and Trilateration Techiques for Lbs Applications

    Science.gov (United States)

    Chan, S.; Sohn, G.

    2012-06-01

    The past few years have seen wide spread adoption of outdoor positioning services, mainly GPS, being incorporated into everyday devices such as smartphones and tablets. While outdoor positioning has been well received by the public, its indoor counterpart has been mostly limited to private use due to its higher costs and complexity for setting up the proper environment. The objective of this research is to provide an affordable mean for indoor localization using wireless local area network (WLAN) Wi-Fi technology. We combined two different Wi-Fi approaches to locate a user. The first method involves the use of matching the pre-recorded received signal strength (RSS) from nearby access points (AP), to the data transmitted from the user on the fly. This is commonly known as "fingerprint matching". The second approach is a distance-based trilateration approach using three known AP coordinates detected on the user's device to derive the position. The combination of the two steps enhances the accuracy of the user position in an indoor environment allowing location-based services (LBS) such as mobile augmented reality (MAR) to be deployed more effectively in the indoor environment. The mapping of the RSS map can also prove useful to IT planning personnel for covering locations with no Wi-Fi coverage (ie. dead spots). The experiments presented in this research helps provide a foundation for the integration of indoor with outdoor positioning to create a seamless transition experience for users.

  5. Study on a New Steering Mechanism for Point-the-Bit Rotary Steerable System

    Directory of Open Access Journals (Sweden)

    Yuanzhi Li

    2014-02-01

    Full Text Available This paper presents a novel steering mechanism embedded in a point-the-bit rotary steerable system (RSS for oilfield exploitation. The new steering mechanism adopts a set of universal joints to alleviate the high alternative strain on drilling mandrel and employs a specially designed planetary gear small tooth number difference (PGSTD to achieve directional steering. Its principle and characteristics are explained and examined through a series of analyses. First, the eccentric displacement vector of the offset point on the drilling mandrel is formulated and kinematic solutions are established. Next, structural design for the new steering mechanism is addressed. Then, procedures and program architectures for simulating offset state of the drilling mandrel and motion trajectory of the whole steering mechanism are presented. After that, steering motion simulations of the new steering mechanism for both 2D and 3D well trajectories are then performed by combining LabVIEW and SolidWorks. Finally, experiments on the steering motion control of the new steering mechanism prototype are carried out. The simulations and experiments reveal that the steering performance of the new steering mechanism is satisfied. The research can provide good guidance for further research and engineering application of the point-the-bit RSS.

  6. LANSCE Beam Current Limiter (XL)

    International Nuclear Information System (INIS)

    Gallegos, F.R.; Hall, M.J.

    1997-01-01

    The Radiation Security System (RSS) at the Los Alamos Neutron Science Center (LANSCE) is an engineered safety system that provides personnel protection from prompt radiation due to accelerated proton beams. The Beam Current Limiter (XL), as an active component of the RSS, limits the maximum average current in a beamline, thus the current available for a beam spill accident. Exceeding the pre-set limit initiates action by the RSS to mitigate the hazard (insertion of beam stoppers in the low energy beam transport). The beam limiter is an electrically isolated, toroidal transformer and associated electronics. The device was designed to continuously monitor beamline currents independent of any external timing. Fail-safe operation was a prime consideration in its development. Fail-safe operation is defined as functioning as intended (due to redundant circuitry), functioning with a more sensitive fault threshold, or generating a fault condition. This report describes the design philosophy, hardware, implementation, operation, and limitations of the device

  7. Radioactive sealed sources: Reasonable accountability, exemption, and licensing activity thresholds -- A technical basis

    International Nuclear Information System (INIS)

    Lee, D.W.; Shingleton, K.L.

    1996-01-01

    Perhaps owing to their small size and portability, some radiation accidents/incidents have involved radioactive sealed sources (RSSs). As a result, programs for the control and accountability of RSSs have come to be recommended and emplaced that essentially require RSSs to be controlled in a manner different from bulk, unsealed radioactive material. Crucially determining the total number of RSSs for which manpower-intensive radiation protection surveillance is provided is the individual RSS activity above which such surveillance is required and below which such effort is not considered cost effective. Individual RSS activity thresholds are typically determined through scenarios which impart a chosen internal or external limiting dose to Reference Man under specified exposure conditions. The resultant RSS threshold activity levels have meaning commensurate with the assumed scenario exposure parameters, i.e., if they are realistic and technically based. A review of how the Department of Energy (DOE), the International Atomic Energy Agency (IAEA), and the Nuclear Regulatory Commission (NRC) have determined their respective accountability, exemption, and licensing threshold activity values is provided. Finally, a fully explained method using references readily available to practicing health physicists is developed using realistic, technically-based calculation parameters by which RSS threshold activities may be locally generated

  8. Seminoma in a Man with Russell-Silver Syndrome Presenting with Testicular Torsion

    Directory of Open Access Journals (Sweden)

    Satoshi Funada

    2016-01-01

    Full Text Available Russell-Silver syndrome (RSS is a type of primordial dwarfism. Only one case of testicular cancer in RSS has been reported, the pathology of which was nonseminoma. Here, we report a case of seminoma in a 36-year-old man who was diagnosed with RSS at birth. The seminoma was diagnosed when the patient presented with testicular torsion. This is the first report of testicular seminoma in an RSS patient in the literature. We also discussed the correlation between seminoma and RSS.

  9. Digital control for the Penn State Breazeale reactor

    International Nuclear Information System (INIS)

    Raiskums, G.A.

    1991-01-01

    Digital control has been an integral part of Canada deuterium uranium (CANDU) nuclear power reactor technology since the 1960s. Much of the high CANDU production reliability can be attributed to the fault-tolerant and flexible control algorithms achievable with digital control. Atomic Energy of Canada Limited (AECL) has now transported this technology to research reactors, using industrial-grade microcomputers to solve equipment aging and spares obsolescence problems so prevalent at older installations. The open architecture of the Intel 8086-based computers provides for wide availability and reasonably priced, quality hardware from numerous sources. AECL recently supplied the Pennsylvania State University Breazeale Reactor (PSBR) with a new console containing a digital control and monitoring system. The reactor safety system (RSS) was also replaced with hardwired relay logic and truly analog state-of-the-art wide range nuclear instrumentation supplied by AECL's subcontractor, Gamma-Metrics. Retaining analog hardware for the mandated RSS functions was key to minimizing licensing efforts and the extensive verification and validation that would be required for safety system software. This paper elaborates on the digital control and monitoring portion of the PSBR console replacement, with emphasis on the key system objectives

  10. Economic feasibility of radioactive scrap steel recycling

    International Nuclear Information System (INIS)

    Balhiser, R.; Rosholt, D.; Nichols, F.

    1995-01-01

    The goal of MSE's Radioactive Scrap Steel (RSS) Recycle Program is to develop practical methods for recycling RSS into useful product. This paper provides interim information about ongoing feasibility investigations that are scheduled for completion by September 1995. The project approach, major issues, and cost projections are outlined. Current information indicates that a cost effective RSS Recycling Facility can be designed, built, and in operation by 1999. The RSS team believes that high quality steel plate can be made from RSS at a conversion cost of $1500 per ton or less

  11. Characterization of the RNA silencing suppression activity of the Ebola virus VP35 protein in plants and mammalian cells.

    Science.gov (United States)

    Zhu, Yali; Cherukuri, Nil Celebi; Jackel, Jamie N; Wu, Zetang; Crary, Monica; Buckley, Kenneth J; Bisaro, David M; Parris, Deborah S

    2012-03-01

    Ebola virus (EBOV) causes a lethal hemorrhagic fever for which there is no approved effective treatment or prevention strategy. EBOV VP35 is a virulence factor that blocks innate antiviral host responses, including the induction of and response to alpha/beta interferon. VP35 is also an RNA silencing suppressor (RSS). By inhibiting microRNA-directed silencing, mammalian virus RSSs have the capacity to alter the cellular environment to benefit replication. A reporter gene containing specific microRNA target sequences was used to demonstrate that prior expression of wild-type VP35 was able to block establishment of microRNA silencing in mammalian cells. In addition, wild-type VP35 C-terminal domain (CTD) protein fusions were shown to bind small interfering RNA (siRNA). Analysis of mutant proteins demonstrated that reporter activity in RSS assays did not correlate with their ability to antagonize double-stranded RNA (dsRNA)-activated protein kinase R (PKR) or bind siRNA. The results suggest that enhanced reporter activity in the presence of VP35 is a composite of nonspecific translational enhancement and silencing suppression. Moreover, most of the specific RSS activity in mammalian cells is RNA binding independent, consistent with VP35's proposed role in sequestering one or more silencing complex proteins. To examine RSS activity in a system without interferon, VP35 was tested in well-characterized plant silencing suppression assays. VP35 was shown to possess potent plant RSS activity, and the activities of mutant proteins correlated strongly, but not exclusively, with RNA binding ability. The results suggest the importance of VP35-protein interactions in blocking silencing in a system (mammalian) that cannot amplify dsRNA.

  12. An improved algorithm to generate a Wi-Fi fingerprint database for indoor positioning.

    Science.gov (United States)

    Chen, Lina; Li, Binghao; Zhao, Kai; Rizos, Chris; Zheng, Zhengqi

    2013-08-21

    The major problem of Wi-Fi fingerprint-based positioning technology is the signal strength fingerprint database creation and maintenance. The significant temporal variation of received signal strength (RSS) is the main factor responsible for the positioning error. A probabilistic approach can be used, but the RSS distribution is required. The Gaussian distribution or an empirically-derived distribution (histogram) is typically used. However, these distributions are either not always correct or require a large amount of data for each reference point. Double peaks of the RSS distribution have been observed in experiments at some reference points. In this paper a new algorithm based on an improved double-peak Gaussian distribution is proposed. Kurtosis testing is used to decide if this new distribution, or the normal Gaussian distribution, should be applied. Test results show that the proposed algorithm can significantly improve the positioning accuracy, as well as reduce the workload of the off-line data training phase.

  13. Analysis of transmission properties in an indoor wireless sensor network based on a full-factorial design

    International Nuclear Information System (INIS)

    Christmann, Dennis; Martinovic, Ivan; Schmitt, Jens B

    2010-01-01

    In this paper, we systematically investigate different factors and their effects on the wireless transmission properties using a full-factorial experimental design of a wireless sensor network in a real-world indoor environment. We quantify the impact of primary factors such as the wireless channel, physical position, transmission power and line of sight, as well as their interactions on the received signal strength (RSS). While some of our results support conventional assumptions, this study also shows that there are several properties which are in contrast to existing findings. For example, there is no significant correlation in the measured RSS between differently located but equally distant transmitters, yet the correlation coefficient for the two directions of a single link between two transmitters is above 94%, leading to very symmetric links that differ only in a few dBm for the two directions. Further analysis reveals the strong interaction of transmission frequency and physical position, while the transmission power has only an isolated, non-interacting effect on the RSS. Since the analyzed network consists of commodity motes utilizing TI's well-known IEEE 802.15.4 compliant CC2420 transceiver, the results of this experimental analysis can serve as valuable insights in planning and deploying wireless sensor networks in different application scenarios

  14. Reduction of abdominal fat accumulation in rats by 8-week ingestion of a newly developed sweetener made from high fructose corn syrup.

    Science.gov (United States)

    Iida, Tetsuo; Yamada, Takako; Hayashi, Noriko; Okuma, Kazuhiro; Izumori, Ken; Ishii, Reika; Matsuo, Tatsuhiro

    2013-06-01

    Many studies have shown that ingestion of high-fructose corn syrup (HFCS) may cause an increase in body weight and abdominal fat. We recently developed a new sweetener containing rare sugars (rare sugar syrup; RSS) by slight isomerization of HFCS. Here, the functional effects of RSS on body weight and abdominal fat, and biochemical parameters in Wistar rats were examined. Rats (n=30) were randomly divided into three groups and maintained for 8-weeks on starch, starch+HFCS (50:50), and starch+RSS (50:50) diets. Rats in the Starch and HFCS groups gained significantly more body weight and abdominal fat than the RSS group. Fasting serum insulin in the RSS group was significantly lower than in the Starch and HFCS groups, although serum glucose in the HFCS and RSS groups was significantly lower than that in the Starch group. Thus, the substitution of HFCS with RSS prevents obesity induced by the consumption of HFCS. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Rare Sugar Syrup Containing d-Allulose but Not High-Fructose Corn Syrup Maintains Glucose Tolerance and Insulin Sensitivity Partly via Hepatic Glucokinase Translocation in Wistar Rats.

    Science.gov (United States)

    Shintani, Tomoya; Yamada, Takako; Hayashi, Noriko; Iida, Tetsuo; Nagata, Yasuo; Ozaki, Nobuaki; Toyoda, Yukiyasu

    2017-04-05

    Ingestion of high-fructose corn syrup (HFCS) is associated with the risk of both diabetes and obesity. Rare sugar syrup (RSS) has been developed by alkaline isomerization of HFCS and has anti-obesity and anti-diabetic effects. However, the influence of RSS on glucose metabolism has not been explored. We investigated whether long-term administration of RSS maintains glucose tolerance and whether the underlying mechanism involves hepatic glucokinase translocation. Wistar rats were administered water, RSS, or HFCS in drinking water for 10 weeks and then evaluated for glucose tolerance, insulin tolerance, liver glycogen content, and subcellular distribution of liver glucokinase. RSS significantly suppressed body weight gain and abdominal fat mass (p glucose tolerance test revealed significantly higher blood glucose levels in the HFCS group compared to the water group, whereas the RSS group had significantly lower blood glucose levels from 90 to 180 min (p water group (p glucose loading, the nuclear export of glucokinase was significantly increased in the RSS group compared to the water group. These results imply that RSS maintains glucose tolerance and insulin sensitivity, at least partly, by enhancing nuclear export of hepatic glucokinase.

  16. Heterologous RNA-silencing suppressors from both plant- and animal-infecting viruses support plum pox virus infection.

    Science.gov (United States)

    Maliogka, Varvara I; Calvo, María; Carbonell, Alberto; García, Juan Antonio; Valli, Adrian

    2012-07-01

    HCPro, the RNA-silencing suppressor (RSS) of viruses belonging to the genus Potyvirus in the family Potyviridae, is a multifunctional protein presumably involved in all essential steps of the viral infection cycle. Recent studies have shown that plum pox potyvirus (PPV) HCPro can be replaced successfully by cucumber vein yellowing ipomovirus P1b, a sequence-unrelated RSS from a virus of the same family. In order to gain insight into the requirement of a particular RSS to establish a successful potyviral infection, we tested the ability of different heterologous RSSs from both plant- and animal-infecting viruses to substitute for HCPro. Making use of engineered PPV chimeras, we show that PPV HCPro can be replaced functionally by some, but not all, unrelated RSSs, including the NS1 protein of the mammal-infecting influenza A virus. Interestingly, the capacity of a particular RSS to replace HCPro does not correlate strictly with its RNA silencing-suppression strength. Altogether, our results suggest that not all suppression strategies are equally suitable for efficient escape of PPV from the RNA-silencing machinery. The approach followed here, based on using PPV chimeras in which an under-consideration RSS substitutes for HCPro, could further help to study the function of diverse RSSs in a 'highly sensitive' RNA-silencing context, such as that taking place in plant cells during the process of a viral infection.

  17. Capability-based computer systems

    CERN Document Server

    Levy, Henry M

    2014-01-01

    Capability-Based Computer Systems focuses on computer programs and their capabilities. The text first elaborates capability- and object-based system concepts, including capability-based systems, object-based approach, and summary. The book then describes early descriptor architectures and explains the Burroughs B5000, Rice University Computer, and Basic Language Machine. The text also focuses on early capability architectures. Dennis and Van Horn's Supervisor; CAL-TSS System; MIT PDP-1 Timesharing System; and Chicago Magic Number Machine are discussed. The book then describes Plessey System 25

  18. Retrieval-travel-time model for free-fall-flow-rack automated storage and retrieval system

    Science.gov (United States)

    Metahri, Dhiyaeddine; Hachemi, Khalid

    2018-03-01

    Automated storage and retrieval systems (AS/RSs) are material handling systems that are frequently used in manufacturing and distribution centers. The modelling of the retrieval-travel time of an AS/RS (expected product delivery time) is practically important, because it allows us to evaluate and improve the system throughput. The free-fall-flow-rack AS/RS has emerged as a new technology for drug distribution. This system is a new variation of flow-rack AS/RS that uses an operator or a single machine for storage operations, and uses a combination between the free-fall movement and a transport conveyor for retrieval operations. The main contribution of this paper is to develop an analytical model of the expected retrieval-travel time for the free-fall flow-rack under a dedicated storage assignment policy. The proposed model, which is based on a continuous approach, is compared for accuracy, via simulation, with discrete model. The obtained results show that the maximum deviation between the continuous model and the simulation is less than 5%, which shows the accuracy of our model to estimate the retrieval time. The analytical model is useful to optimise the dimensions of the rack, assess the system throughput, and evaluate different storage policies.

  19. FPGA-based prototype of portable environmental radiation monitor

    Energy Technology Data Exchange (ETDEWEB)

    Benahmed, A.; Elkarch, H. [CNESTEN -Centre National de l' Energie des Sciences et Techniques Nucleaires (Morocco)

    2015-07-01

    This new portable radiological environmental monitor consists of 2 main components, Gamma ionization chamber and a FPGA-based electronic enclosure linked to convivial software for treatment and analyzing. The HPIC ion chamber is the heart of this radiation measurement system and is running in range from 0 to 100 mR/h, so that the sensitivity at the output is 20 mV/μR/h, with a nearly flat energy response from 0,07 to 10 MEV. This paper presents a contribution for developing a new nuclear measurement data acquisition system based on Cyclone III FPGA Starter Kit ALTERA, and a user-friendly software to run real-time control and data processing. It was developed to substitute the older radiation monitor RSS-112 PIC installed in CNESTEN's Laboratory in order to improve some of its functionalities related to acquisition time and data memory capacity. As for the associated acquisition software, it was conceived under the virtual LabView platform from National Instrument, and offers a variety of system setup for radiation environmental monitoring. It gives choice to display both the statistical data and the dose rate. Statistical data shows a summary of current data, current time/date and dose integrator values, and the dose rate displays the current dose rate in large numbers for viewing from a distance as well as the date and time. The prototype version of this new instrument and its data processing software has been successfully tested and validated for viewing and monitoring the environmental radiation of Moroccan nuclear center. (authors)

  20. DETECTION AND LOCALIZATION OF MULTIPLE SPOOFING ATTACKERS FOR MOBILE WIRELESS NETWORKS

    Directory of Open Access Journals (Sweden)

    R. Maivizhi

    2015-06-01

    Full Text Available The openness nature of wireless networks allows adversaries to easily launch variety of spoofing attacks and causes havoc in network performance. Recent approaches used Received Signal Strength (RSS traces, which only detect spoofing attacks in mobile wireless networks. However, it is not always desirable to use these methods as RSS values fluctuate significantly over time due to distance, noise and interference. In this paper, we discusses a novel approach, Mobile spOofing attack DEtection and Localization in WIireless Networks (MODELWIN system, which exploits location information about nodes to detect identity-based spoofing attacks in mobile wireless networks. Also, this approach determines the number of attackers who used the same node identity to masquerade as legitimate device. Moreover, multiple adversaries can be localized accurately. By eliminating attackers the proposed system enhances network performance. We have evaluated our technique through simulation using an 802.11 (WiFi network and an 802.15.4 (Zigbee networks. The results prove that MODELWIN can detect spoofing attacks with a very high detection rate and localize adversaries accurately.

  1. A localized cooperative wideband spectrum sensing for dynamic access of TV bands using RF sensor networks

    KAUST Repository

    Mirza, Mohammed

    2011-07-01

    In this paper we address and simulate a Radio Frequency (RF) sensor network for a cooperative spectrum sensing and localization scheme. The proposed method integrates a Wavelet based Multi-Resolution Spectrum Sensing (MRSS), an N-bit hard combination technique for cooperative decision making and a Received Signal Strength (RSS) based localization algorithm to detect the availability of frequency bands and the location of the usable base station. We develop an N-bit hard combination technique and compare its performance to a traditionally used 2-bit hard combination for cooperative sensing. The key idea is to design a novel RF sensor network based cooperative wideband spectrum sensing and localization scheme by using a wavelet based Multi-Resolution Spectrum Sensing (MRSS) and Received Signal Strength (RSS) Localization techniques which were originally proposed for cognitive radio applications. The performance evaluations are also done to show the different detection accuracies for varying parameters such as number of sensor nodes, Signal to Noise Ratios (SNR) and number of averaged Power Spectral Densities (PSD). The proposed scheme improves the problems of shadowing, fading and noise. In addition, the RSS based localization technique was shown to be an acceptable means of estimating the position of the available transmitter. © 2011 IEEE.

  2. Dealing with Insufficient Location Fingerprints in Wi-Fi Based Indoor Location Fingerprinting

    Directory of Open Access Journals (Sweden)

    Kai Dong

    2017-01-01

    Full Text Available The development of the Internet of Things has accelerated research in the indoor location fingerprinting technique, which provides value-added localization services for existing WLAN infrastructures without the need for any specialized hardware. The deployment of a fingerprinting based localization system requires an extremely large amount of measurements on received signal strength information to generate a location fingerprint database. Nonetheless, this requirement can rarely be satisfied in most indoor environments. In this paper, we target one but common situation when the collected measurements on received signal strength information are insufficient, and show limitations of existing location fingerprinting methods in dealing with inadequate location fingerprints. We also introduce a novel method to reduce noise in measuring the received signal strength based on the maximum likelihood estimation, and compute locations from inadequate location fingerprints by using the stochastic gradient descent algorithm. Our experiment results show that our proposed method can achieve better localization performance even when only a small quantity of RSS measurements is available. Especially when the number of observations at each location is small, our proposed method has evident superiority in localization accuracy.

  3. Open meta-search with OpenSearch: a case study

    OpenAIRE

    O'Riordan, Adrian P.

    2007-01-01

    The goal of this project was to demonstrate the possibilities of open source search engine and aggregation technology in a Web environment by building a meta-search engine which employs free open search engines and open protocols. In contrast many meta-search engines on the Internet use proprietary search systems. The search engines employed in this case study are all based on the OpenSearch protocol. OpenSearch-compliant systems support XML technologies such as RSS and Atom for aggregation a...

  4. an architecture-based technique to mobile contact recommendation

    African Journals Online (AJOL)

    user

    Aside being able to store the name of contacts and their phone numbers, there are ... the artificial neural network technique [21], along with ... Recommendation is part of everyday life. This concept ... However, to use RSs some level of intelligence must be ...... [3] Min J.-K. & Cho S.-B.Mobile Human Network Management.

  5. Comparison of Anti-Obesity Effect between Two Types of Syrup Containing Rare Sugars in Wistar Rats.

    Science.gov (United States)

    Ochiai, Masaru; Misaki, Kohei; Yamada, Takako; Iida, Tetsuo; Okuma, Kazuhiro; Matsuo, Tatsuhiro

    2017-01-01

    D-Allulose-containing rare sugar sweeteners have been categorized into two types, rare sugar syrup (RSS), consisting of 4 rare monosaccharides, and modified glucose syrup (MGS), rich in D-allulose, which was previously referred to D-psicose. The anti-obesity effect of RSS and D-allulose has been already clarified, but that of rare monosaccharides other than D-allulose in RSS has not yet been well understood. Here, we investigated and compared the anti-obesity effect of RSS and MGS in rats. Male Wistar rats were divided into 4 dietary groups: a high-sucrose control diet group (S), a high-fructose corn syrup diet group (HFCS), an RSS diet group (RSS), and an MGS diet group (MGS). RSS significantly suppressed abdominal adipose tissue weight and total body fat accumulation in comparison to sucrose. On the other hand, MGS reduced body weight gain, but not abdominal fat accumulation, relative to sucrose. The weight of the liver and kidneys was significantly higher in the RSS and MGS groups than in the S and HFCS groups, but serum biochemical parameters and hepatic lipids contents were not significantly different among the groups. The present study shows that two types of D-allulose-containing rare sugar sweeteners can suppress body fat accumulation or weight gain in a different manner and that RSS could be used as more effective sweeteners in place of sucrose and HFCS to maintain healthy body weight.

  6. Investigation of a new handover approach in LTE and WiMAX.

    Science.gov (United States)

    Hindia, Mohammad Nour; Reza, Ahmed Wasif; Noordin, Kamarul Ariffin

    2014-01-01

    Nowadays, one of the most important challenges in heterogeneous networks is the connection consistency between the mobile station and the base stations. Furthermore, along the roaming process between the mobile station and the base station, the system performance degrades significantly due to the interferences from neighboring base stations, handovers to inaccurate base station and inappropriate technology selection. In this paper, several algorithms are proposed to improve mobile station performance and seamless mobility across the long-term evolution (LTE) and Worldwide Interoperability for Microwave Access (WiMAX) technologies, along with a minimum number of redundant handovers. Firstly, the enhanced global positioning system (GPS) and the novel received signal strength (RSS) prediction approaches are suggested to predict the target base station accurately. Then, the multiple criteria with two thresholds algorithm is proposed to prioritize the selection between LTE and WiMAX as the target technology. In addition, this study also covers the intercell and cochannel interference reduction by adjusting the frequency reuse ratio 3 (FRR3) to work with LTE and WiMAX. The obtained results demonstrate high next base station prediction efficiency and high accuracy for both horizontal and vertical handovers. Moreover, the received signal strength is kept at levels higher than the threshold, while maintaining low connection cost and delay within acceptable levels. In order to highlight the combination of the proposed algorithms' performance, it is compared with the existing RSS and multiple criteria handover decision algorithms.

  7. At-a-glance - “A tough sell”: findings from a qualitative analysis on the provision of healthy foods in recreation and sports settings

    Directory of Open Access Journals (Sweden)

    Jessie-Lee D. McIsaac

    2018-01-01

    Full Text Available Recreation and sport settings (RSS typically promote health in the form of physical activity, but the healthfulness of their food environment is often neglected. We explored stakeholder perspectives on barriers to healthy food provision in RSS through telephone interviews with ten representatives from RSS across Nova Scotia. Three key barriers were identified: 1 cultural norms associated with food in RSS and the broader environment, 2 the persisting notion of personal choice and responsibility, and 3 financial implications of healthy food provision. These barriers challenge healthy food provision in RSS and require multi-faceted strategies to overcome social norms that undermine health behaviours.

  8. Daily repetitive sensory stimulation of the paretic hand for the treatment of sensorimotor deficits in patients with subacute stroke: RESET, a randomized, sham-controlled trial.

    Science.gov (United States)

    Kattenstroth, Jan C; Kalisch, Tobias; Sczesny-Kaiser, Matthias; Greulich, Wolfgang; Tegenthoff, Martin; Dinse, Hubert R

    2018-01-09

    Repetitive sensory stimulation (RSS) adapts the timing of stimulation protocols used in cellular studies to induce synaptic plasticity. In healthy subjects, RSS leads to widespread sensorimotor cortical reorganization paralleled by improved sensorimotor behavior. Here, we investigated whether RSS reduces sensorimotor upper limb impairment in patients with subacute stroke more effectively than conventional therapy. A single-blinded sham-controlled clinical trial assessed the effectiveness of RSS in treating sensorimotor deficits of the upper limbs. Patients with subacute unilateral ischemic stroke were randomly assigned to receive standard therapy in combination with RSS or with sham RSS. Patients were masked to treatment allocation. RSS consisted of intermittent 20 Hz electrical stimulation applied on the affected hand for 45 min/day, 5 days per week, for 2 weeks, and was transmitted using custom-made stimulation-gloves with built-in electrodes contacting each fingertip separately. Before and after the intervention, we assessed light-touch and tactile discrimination, proprioception, dexterity, grip force, and subtasks of the Jebsen Taylor hand-function test for the non-affected and the affected hand. Data from these quantitative tests were combined into a total performance index serving as primary outcome measure. In addition, tolerability and side effects of RSS intervention were recorded. Seventy one eligible patients were enrolled and randomly assigned to receive RSS treatment (n = 35) or sham RSS (n = 36). Data of 25 patients were not completed because they were transferred to another hospital, resulting in n = 23 for each group. Before treatment, sensorimotor performance between groups was balanced (p = 0.237). After 2 weeks of the intervention, patients in the group receiving standard therapy with RSS showed significantly better restored sensorimotor function than the control group (standardized mean difference 0.57; 95% CI -0

  9. Fuzzy Logic-based Intelligent Scheme for Enhancing QoS of Vertical Handover Decision in Vehicular Ad-hoc Networks

    Science.gov (United States)

    Azzali, F.; Ghazali, O.; Omar, M. H.

    2017-08-01

    The design of next generation networks in various technologies under the “Anywhere, Anytime” paradigm offers seamless connectivity across different coverage. A conventional algorithm such as RSSThreshold algorithm, that only uses the received strength signal (RSS) as a metric, will decrease handover performance regarding handover latency, delay, packet loss, and handover failure probability. Moreover, the RSS-based algorithm is only suitable for horizontal handover decision to examine the quality of service (QoS) compared to the vertical handover decision in advanced technologies. In the next generation network, vertical handover can be started based on the user’s convenience or choice rather than connectivity reasons. This study proposes a vertical handover decision algorithm that uses a Fuzzy Logic (FL) algorithm, to increase QoS performance in heterogeneous vehicular ad-hoc networks (VANET). The study uses network simulator 2.29 (NS 2.29) along with the mobility traffic network and generator to implement simulation scenarios and topologies. This helps the simulation to achieve a realistic VANET mobility scenario. The required analysis on the performance of QoS in the vertical handover can thus be conducted. The proposed Fuzzy Logic algorithm shows improvement over the conventional algorithm (RSSThreshold) in the average percentage of handover QoS whereby it achieves 20%, 21% and 13% improvement on handover latency, delay, and packet loss respectively. This is achieved through triggering a process in layer two and three that enhances the handover performance.

  10. Nuclear reactor safety, a review of the Rasmussen report (WASH -1400)

    International Nuclear Information System (INIS)

    Gilbert, C.P.

    1979-03-01

    The US Reactor Safety Study (WASH-1400), often referred to as RSS or the Rasmussen Report, sets out to estimate the risk to which the public is exposed by the possibility of an accident in one of the first 100 nuclear power stations situated in the USA. This review briefly describes the methods used in RSS, and indicates how the results were obtained. It then discusses the nature of these results, and the comparisons which RSS makes between them and other accident statistics. Finally, the criticisms which have been levelled at RSS are assessed, and the conclusions of a very recent US Nuclear Regulatory Commission review are included in appendix. RSS concludes that the risk due to reactor accidents is smaller than that associated with many other aspects of everyday life. While there are shortcomings in RSS, the author has little doubt that the above conclusion is valid

  11. Impact of the Surgical Research Methodology Program on surgical residents' research profiles.

    Science.gov (United States)

    Farrokhyar, Forough; Amin, Nalin; Dath, Deepak; Bhandari, Mohit; Kelly, Stephan; Kolkin, Ann M; Gill-Pottruff, Catherine; Skot, Martina; Reid, Susan

    2014-01-01

    To evaluate whether implementing the formal Surgical Research Methodology (SRM) Program in the surgical residency curriculum improved research productivity compared with the preceding informal Research Seminar Series (RSS). The SRM Program replaced the RSS in July 2009. In the SRM Program, the curriculum in Year-1 consisted of 12 teaching sessions on the principles of clinical epidemiology and biostatistics, whereas the focus in Year-2 was on the design, conduct, and presentation of a research project. The RSS consisted of 8 research methodology sessions repeated annually for 2 years along with the design, conduct, and presentation of a research project. Research productivity was measured as the number of peer-reviewed publications and the generation of studies with higher levels of evidence. Outcome measures were independently assessed by 2 authors to avoid bias. Student t test and chi-square test were used for the analysis. Frequencies, mean differences with 95% CI, and effect sizes have been reported. In this study, 81 SRM residents were compared with 126 RSS residents. The performance of the SRM residents was superior on all metrics in our evaluation. They were significantly more productive and published more articles than the RSS residents (mean difference = 1.0 [95% CI: 0.5-1.5], p research performance improved 11.0 grades (95% CI: 8.5%-13.5%, p research methodology is crucial to appropriately apply evidence-based findings in clinical practice. The SRM Program has significantly improved the research productivity and performance of the surgical residents from all disciplines. The implementation of a similar research methodology program is highly recommended for the benefit of residents' future careers and ultimately, evidence-based patient care. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  12. POLITICA DE RECRUTARE ȘI SELECȚIE A PERSONALULUI ACADEMIC ÎN ÎNVĂȚĂMÂNTUL SUPERIOR DIN RSS MOLDOVENEASCĂ. 1944-1950

    Directory of Open Access Journals (Sweden)

    Liliana ROTARU

    2017-08-01

    Full Text Available Resursa umană este capitalul strategic al oricărei instituții de învățământ superior și o politică judicioasă de personal, în general, dar mai ales de recrutare și selecție a cadrelor didactico-științifice. Ea face posibilă realizarea misiunii învăță­mân­tului superior, implicit, prin cei care îl promovează. Cercetarea politicii de personal în școlile superioare din RSS Moldovenească în perioada de refacere a învățământului superior de după cel de-al Doilea Război Mondial a scos în evidență că aceasta era subordonată politicii naționale a statului sovietic, care presupunea formarea „omului nou” și integrarea acestuia în identitatea supraetnică numită „popor sovietic” – deznaționalizat, îndoctrinat cu ideologie marxist-leninistă, rusificat și rusianizat, care să aibă o patrie socialistă comună – Uniunea Sovietică și un scop comun – const­ruirea comunismului. Toate instrumentele și metodele de recrutare și selectare a personalului academic pentru insti­tuțiile de învățământ din RSS Moldovenească erau subordonate necesității creării unui corp didactico-științific în mare parte vorbitor și purtător de limbă și cultură rusă, puternic ideologizat și loial statului sovietic și partidului comunist, și mai apoi de o anumită competență profesională, toate acestea camuflate sub pregnanta idee de promovare a „elemen­tului autohton moldovenesc”.THE POLICY OF RECRUITMENT AND SELECTION OF ACADEMIC STAFF IN HIGHER EDUCATION OF MSSR. 1944-1950The human resource is the strategic capital of any higher education institutions and, in general, a judicious staff policy, but especially – a good policy of recruitment and selection of didactic and scientific staff makes possible to realize the higher education mission and, by default – the goals of those who are promoting it. The research of staff policy in high schools of MSSR during the higher education

  13. Study of Hybrid Localization Noncooperative Scheme in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Irfan Dwiguna Sumitra

    2017-01-01

    Full Text Available In this paper, we evaluated the experiment and analysis measurement accuracy to determine object location based on wireless sensor network (WSN. The algorithm estimates the position of sensor nodes employing received signal strength (RSS from scattered nodes in the environment, in particular for the indoor building. Besides that, we considered another algorithm based on weight centroid localization (WCL. In particular testbed, we combined both RSS and WCL as hybrid localization in case of noncooperative scheme with considering that source nodes directly communicate only with anchor nodes. Our experimental result shows localization accuracy of more than 90% and obtained the estimation error reduction to 4% compared to existing algorithms.

  14. Defense Budget: DOD Needs to Improve Reporting of Operation and Maintenance Base Obligations

    Science.gov (United States)

    2016-08-01

    10For additional information on DOD’s planning, programming, budgeting, and execution process, see GAO, DOD Service Acquisition ...check, or money order. Call for additional information. Connect with GAO on Facebook , Flickr, Twitter, and YouTube. Subscribe to our RSS Feeds or E

  15. Bifactor Models of Religious and Spiritual Struggles: Distinct from Religiousness and Distress

    Directory of Open Access Journals (Sweden)

    Nick Stauner

    2016-06-01

    Full Text Available The Religious and Spiritual Struggles Scale (RSS measures important psychological constructs in an underemphasized section of the overlap between religion and well-being. Are religious/spiritual struggles distinct from religiousness, distress, and each other? To test the RSS’ internal discriminant validity, we replicated the original six-factor measurement model across five large samples (N = 5705 and tested the fit of a restricted bifactor model, which supported the mutual viability of multidimensional and unidimensional scoring systems for the RSS. Additionally, we explored a bifactor model with correlated group factors that exhibited optimal fit statistics. This model maintained the correlations among the original factors while extracting a general factor from the RSS. This general factor’s strong correlations with religious participation and belief salience suggested that this factor resembles religiousness itself. Estimating this general factor seemed to improve Demonic and Moral struggles’ independence from religiousness, but did not change any factor’s correlations with neuroticism, depression, anxiety, and stress. These distress factors correlated with most of the independent group factors corresponding to the original dimensions of the RSS, especially Ultimate Meaning and Divine struggles. These analyses demonstrate the discriminant validity of religious/spiritual struggles and the complexity of their relationships with religiousness and distress.

  16. Seryl-tRNA Synthetases in Translation and Beyond

    Directory of Open Access Journals (Sweden)

    Marko Močibob

    2016-06-01

    Full Text Available For a long time seryl-tRNA synthetases (SerRSs stood as an archetypal, canonical aminoacyl-tRNA synthetases (aaRS, exhibiting only basic tRNA aminoacylation activity and with no moonlighting functions beyond protein biosynthesis. The picture has changed substantially in recent years after the discovery that SerRSs play an important role in antibiotic production and resistance and act as a regulatory factor in vascular development, as well as after the discovery of mitochondrial morphogenesis factor homologous to SerRS in insects. In this review we summarize the recent research results from our laboratory, which advance the understanding of seryl-tRNA synthetases and further paint the dynamic picture of unexpected SerRS activities. SerRS from archaeon Methanothermobacter thermautotrophicus was shown to interact with the large ribosomal subunit and it was postulated to contribute to a more efficient translation by the"tRNA channeling" hypothesis. Discovery of the atypical SerRS in a small number of methanogenic archaea led to the discovery of a new family of enzymes in numerous bacteria - amino acid:[carrier protein] ligases (aa:CP ligases. These SerRS homologues resigned tRNA aminoacylation activity, and instead adopted carrier proteins as the acceptors of activated amino acids. The crystal structure of the aa:CP ligase complex with the carrier protein revealed that the interactions between two macromolecules are incomparable to tRNA binding by the aaRS and consequently represent a true evolutionary invention. Kinetic investigations of SerRSs and the accuracy of amino acid selection revealed that SerRSs possess pre-transfer proofreading activity, challenging the widely accepted presumption that hydrolytic proofreading activity must reside in an additional, separate editing domain, not present in SerRSs. Finally, the plant tRNA serylation system is discussed, which is particularly interesting due to the fact that protein biosynthesis takes place

  17. Management Information System (MIS: Tool for Monitoring the Waste Management Health Service (RSS and Cost of Treatment

    Directory of Open Access Journals (Sweden)

    Vania Elisabete Schneider

    2013-06-01

    Full Text Available One of the major challenges of solid waste management has been improve and deploy systems that perform monitoring and control of management processes of health service’s waste (HSW. This study aims to evaluate the total cost per category of HSW/day and active bed/day with the handling of HSW in a teaching hospital in northeastern area of Brazil`s Rio Grande do Sul state and identify contributions of a management information system (MIS in the management process, especially considering the generation and segregation of waste. Utilized methodology was developed in two stages: data collection about the management of the HSW and proposition, implementation and feed of a MIS for recording and processing of data related to waste characterization. Results show that whether the management system of the hospital in this study were 100% right, the monthly savings for the treatment of infectious waste would be 18.4% of the costs and 5.83% of costs of chemical waste. The implementation of MIS becomes an essential tool in the evaluation of the management process of HSW since it makes possible to raise issues of fundamental importance to the implementation and evaluation of strategies contained in the HSW management plan. The MIS also represents a tool of easy reference and of great importance to evaluate generation of HSW as it helps to promote the surveillance, identification of sectors that have the biggest problems with segregation, as well as ways to minimize costs and impacts.

  18. Exploring the evolutionary diversity and assembly modes of multi-aminoacyl-tRNA synthetase complexes: lessons from unicellular organisms.

    Science.gov (United States)

    Laporte, Daphné; Huot, Jonathan L; Bader, Gaétan; Enkler, Ludovic; Senger, Bruno; Becker, Hubert Dominique

    2014-11-28

    Aminoacyl-tRNA synthetases (aaRSs) are ubiquitous and ancient enzymes, mostly known for their essential role in generating aminoacylated tRNAs. During the last two decades, many aaRSs have been found to perform additional and equally crucial tasks outside translation. In metazoans, aaRSs have been shown to assemble, together with non-enzymatic assembly proteins called aaRSs-interacting multifunctional proteins (AIMPs), into so-called multi-synthetase complexes (MSCs). Metazoan MSCs are dynamic particles able to specifically release some of their constituents in response to a given stimulus. Upon their release from MSCs, aaRSs can reach other subcellular compartments, where they often participate to cellular processes that do not exploit their primary function of synthesizing aminoacyl-tRNAs. The dynamics of MSCs and the expansion of the aaRSs functional repertoire are features that are so far thought to be restricted to higher and multicellular eukaryotes. However, much can be learnt about how MSCs are assembled and function from apparently 'simple' organisms. Here we provide an overview on the diversity of these MSCs, their composition, mode of assembly and the functions that their constituents, namely aaRSs and AIMPs, exert in unicellular organisms. Copyright © 2014 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

  19. Combining Host-based and network-based intrusion detection system

    African Journals Online (AJOL)

    These attacks were simulated using hping. The proposed system is implemented in Java. The results show that the proposed system is able to detect attacks both from within (host-based) and outside sources (network-based). Key Words: Intrusion Detection System (IDS), Host-based, Network-based, Signature, Security log.

  20. Repeated-Sprint Sequences During Female Soccer Matches Using Fixed and Individual Speed Thresholds.

    Science.gov (United States)

    Nakamura, Fábio Y; Pereira, Lucas A; Loturco, Irineu; Rosseti, Marcelo; Moura, Felipe A; Bradley, Paul S

    2017-07-01

    Nakamura, FY, Pereira, LA, Loturco, I, Rosseti, M, Moura, FA, and Bradley, PS. Repeated-sprint sequences during female soccer matches using fixed and individual speed thresholds. J Strength Cond Res 31(7): 1802-1810, 2017-The main objective of this study was to characterize the occurrence of single sprint and repeated-sprint sequences (RSS) during elite female soccer matches, using fixed (20 km·h) and individually based speed thresholds (>90% of the mean speed from a 20-m sprint test). Eleven elite female soccer players from the same team participated in the study. All players performed a 20-m linear sprint test, and were assessed in up to 10 official matches using Global Positioning System technology. Magnitude-based inferences were used to test for meaningful differences. Results revealed that irrespective of adopting fixed or individual speed thresholds, female players produced only a few RSS during matches (2.3 ± 2.4 sequences using the fixed threshold and 3.3 ± 3.0 sequences using the individually based threshold), with most sequences composing of just 2 sprints. Additionally, central defenders performed fewer sprints (10.2 ± 4.1) than other positions (fullbacks: 28.1 ± 5.5; midfielders: 21.9 ± 10.5; forwards: 31.9 ± 11.1; with the differences being likely to almost certainly associated with effect sizes ranging from 1.65 to 2.72), and sprinting ability declined in the second half. The data do not support the notion that RSS occurs frequently during soccer matches in female players, irrespective of using fixed or individual speed thresholds to define sprint occurrence. However, repeated-sprint ability development cannot be ruled out from soccer training programs because of its association with match-related performance.

  1. Advanced knowledge system for coatings and the gas turbine MRO industry

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, P.E.; Hall, W.; Shadbolt, N.R.; Alani, H.; Szomszo, M. [Southampton Univ. (United Kingdom)

    2008-07-01

    The growth of data generated within thermal spraying is, for many, a daunting business. Yet, this growing resource represents a largely untapped and potentially valuable asset capable of providing 'knowledge' rather than just 'information'. Many companies already use a range of Web based tools. However, the Web itself is changing and the vision for the future, the 'Semantic Web', is set to revolutionise how business will be done. One important aspect of this Web 'future' is that web pages will be greatly enriched and data will have additional information (tags) which help to describe it and more significantly, put the data into a context. This will enable machine readability and the use of query languages to ask direct questions. Following on from ideas introduced at ITSC 2007, a proof of concept demonstrator has been built for thermal spray coatings used in the Maintenance Repair and Overhaul (MRO) of gas turbines. A system has been built which stores and manipulates a range of data including; aircraft deliveries, RSS feeds of aircraft sales, engine types, MRO business details, thermal spray coatings and market dynamics. This paper presents the development of this system and discusses its future potential. (orig.)

  2. Spectral analysis connected with suspension bridge systems

    Czech Academy of Sciences Publication Activity Database

    Malík, Josef

    2016-01-01

    Roč. 81, č. 1 (2016), s. 42-75 ISSN 0272-4960 R&D Projects: GA MŠk ED2.1.00/03.0082 Institutional support: RVO:68145535 Keywords : suspension bridge * vertical and torsional oscillation * eigenvalue * eigenvector * flutter Subject RIV: JM - Building Engineering Impact factor: 0.945, year: 2016 http://imamat.oxfordjournals.org/content/early/2015/09/16/imamat.hxv027.short?rss=1

  3. Integrated Knowledge Based Expert System for Disease Diagnosis System

    Science.gov (United States)

    Arbaiy, Nureize; Sulaiman, Shafiza Eliza; Hassan, Norlida; Afizah Afip, Zehan

    2017-08-01

    The role and importance of healthcare systems to improve quality of life and social welfare in a society have been well recognized. Attention should be given to raise awareness and implementing appropriate measures to improve health care. Therefore, a computer based system is developed to serve as an alternative for people to self-diagnose their health status based on given symptoms. This strategy should be emphasized so that people can utilize the information correctly as a reference to enjoy healthier life. Hence, a Web-based Community Center for Healthcare Diagnosis system is developed based on expert system technique. Expert system reasoning technique is employed in the system to enable information about treatment and prevention of the diseases based on given symptoms. At present, three diseases are included which are arthritis, thalassemia and pneumococcal. Sets of rule and fact are managed in the knowledge based system. Web based technology is used as a platform to disseminate the information to users in order for them to optimize the information appropriately. This system will benefit people who wish to increase health awareness and seek expert knowledge on the diseases by performing self-diagnosis for early disease detection.

  4. Reliability-Based Optimization of Series Systems of Parallel Systems

    DEFF Research Database (Denmark)

    Enevoldsen, I.; Sørensen, John Dalsgaard

    1993-01-01

    Reliability-based design of structural systems is considered. In particular, systems where the reliability model is a series system of parallel systems are treated. A sensitivity analysis for this class of problems is presented. Optimization problems with series systems of parallel systems...... optimization of series systems of parallel systems, but it is also efficient in reliability-based optimization of series systems in general....

  5. Starting at the End When Planning for Base Closure

    Science.gov (United States)

    2016-05-17

    laundry service , providing bus transporta- tion, operating materials-handling equipment, disposing of trash, cleaning latrines and showers, ser- vicing...for laundry , Internet, and the dining facility), and other important information to be shared as early as possible and reinforced often. RSS used...of contractor service , the fuel require- ment had reduced sufficiently for the support squadron’s sustainment assets to meet the requirements

  6. Handoff Triggering and Network Selection Algorithms for Load-Balancing Handoff in CDMA-WLAN Integrated Networks

    Directory of Open Access Journals (Sweden)

    Khalid Qaraqe

    2008-10-01

    Full Text Available This paper proposes a novel vertical handoff algorithm between WLAN and CDMA networks to enable the integration of these networks. The proposed vertical handoff algorithm assumes a handoff decision process (handoff triggering and network selection. The handoff trigger is decided based on the received signal strength (RSS. To reduce the likelihood of unnecessary false handoffs, the distance criterion is also considered. As a network selection mechanism, based on the wireless channel assignment algorithm, this paper proposes a context-based network selection algorithm and the corresponding communication algorithms between WLAN and CDMA networks. This paper focuses on a handoff triggering criterion which uses both the RSS and distance information, and a network selection method which uses context information such as the dropping probability, blocking probability, GoS (grade of service, and number of handoff attempts. As a decision making criterion, the velocity threshold is determined to optimize the system performance. The optimal velocity threshold is adjusted to assign the available channels to the mobile stations. The optimal velocity threshold is adjusted to assign the available channels to the mobile stations using four handoff strategies. The four handoff strategies are evaluated and compared with each other in terms of GOS. Finally, the proposed scheme is validated by computer simulations.

  7. Handoff Triggering and Network Selection Algorithms for Load-Balancing Handoff in CDMA-WLAN Integrated Networks

    Directory of Open Access Journals (Sweden)

    Kim Jang-Sub

    2008-01-01

    Full Text Available This paper proposes a novel vertical handoff algorithm between WLAN and CDMA networks to enable the integration of these networks. The proposed vertical handoff algorithm assumes a handoff decision process (handoff triggering and network selection. The handoff trigger is decided based on the received signal strength (RSS. To reduce the likelihood of unnecessary false handoffs, the distance criterion is also considered. As a network selection mechanism, based on the wireless channel assignment algorithm, this paper proposes a context-based network selection algorithm and the corresponding communication algorithms between WLAN and CDMA networks. This paper focuses on a handoff triggering criterion which uses both the RSS and distance information, and a network selection method which uses context information such as the dropping probability, blocking probability, GoS (grade of service, and number of handoff attempts. As a decision making criterion, the velocity threshold is determined to optimize the system performance. The optimal velocity threshold is adjusted to assign the available channels to the mobile stations. The optimal velocity threshold is adjusted to assign the available channels to the mobile stations using four handoff strategies. The four handoff strategies are evaluated and compared with each other in terms of GOS. Finally, the proposed scheme is validated by computer simulations.

  8. Flow visualization of a monoleaflet and bileaflet mechanical heart valve in a pneumatic ventricular assist device using a PIV system.

    Science.gov (United States)

    Lee, Hwansung; Tatsumi, Eisuke; Taenaka, Yoshiyuki

    2010-01-01

    Our group is developing a new type of pulsatile pneumatic ventricular assist device (PVAD) that uses the Medtronic Hall tilting disc valve (M-H valve). Although tilting disc valves have good washout effect inside the blood pump, they are no longer in common clinical use and may be difficult to obtain in the future. To investigate the stability of the Sorin Bicarbon valve (S-B valve) in our PVAD, we constructed a model pump made of an acrylic resin with the same configuration as our PVAD and attempted to compare the flow visualization upstream and downstream of the outlet position valve between the M-H valve and the S-B valve using a particle image velocimetry (PIV) method. The outlet S-B valve had faster closure than the M-H valve. The maximum flow velocity was greater than with the M-H valve. The maximum Reynolds shear stress (RSS) of the M-H valve reached 150 N/m(2) and that of the S-B valve reached 300 N/m(2) upstream during the end-systolic and early-diastolic phases. In both valves, the maximum RSS upstream of the valve was higher than downstream of the valve because of the regurgitation flow during valve closure. In addition, the maximum viscous shear stress reached above 2 N/m(2), which occupied only about 1%-1.5% of the maximum RSS.

  9. Three dimensional indoor positioning based on visible light with Gaussian mixture sigma-point particle filter technique

    Science.gov (United States)

    Gu, Wenjun; Zhang, Weizhi; Wang, Jin; Amini Kashani, M. R.; Kavehrad, Mohsen

    2015-01-01

    Over the past decade, location based services (LBS) have found their wide applications in indoor environments, such as large shopping malls, hospitals, warehouses, airports, etc. Current technologies provide wide choices of available solutions, which include Radio-frequency identification (RFID), Ultra wideband (UWB), wireless local area network (WLAN) and Bluetooth. With the rapid development of light-emitting-diodes (LED) technology, visible light communications (VLC) also bring a practical approach to LBS. As visible light has a better immunity against multipath effect than radio waves, higher positioning accuracy is achieved. LEDs are utilized both for illumination and positioning purpose to realize relatively lower infrastructure cost. In this paper, an indoor positioning system using VLC is proposed, with LEDs as transmitters and photo diodes as receivers. The algorithm for estimation is based on received-signalstrength (RSS) information collected from photo diodes and trilateration technique. By appropriately making use of the characteristics of receiver movements and the property of trilateration, estimation on three-dimensional (3-D) coordinates is attained. Filtering technique is applied to enable tracking capability of the algorithm, and a higher accuracy is reached compare to raw estimates. Gaussian mixture Sigma-point particle filter (GM-SPPF) is proposed for this 3-D system, which introduces the notion of Gaussian Mixture Model (GMM). The number of particles in the filter is reduced by approximating the probability distribution with Gaussian components.

  10. Hydrogel based occlusion systems

    NARCIS (Netherlands)

    Stam, F.A.; Jackson, N.; Dubruel, P.; Adesanya, K.; Embrechts, A.; Mendes, E.; Neves, H.P.; Herijgers, P.; Verbrugghe, Y.; Shacham, Y.; Engel, L.; Krylov, V.

    2013-01-01

    A hydrogel based occlusion system, a method for occluding vessels, appendages or aneurysms, and a method for hydrogel synthesis are disclosed. The hydrogel based occlusion system includes a hydrogel having a shrunken and a swollen state and a delivery tool configured to deliver the hydrogel to a

  11. Case-Based FCTF Reasoning System

    Directory of Open Access Journals (Sweden)

    Jing Lu

    2015-10-01

    Full Text Available Case-based reasoning uses old information to infer the answer of new problems. In case-based reasoning, a reasoner firstly records the previous cases, then searches the previous case list that is similar to the current one and uses that to solve the new case. Case-based reasoning means adapting old solving solutions to new situations. This paper proposes a reasoning system based on the case-based reasoning method. To begin, we show the theoretical structure and algorithm of from coarse to fine (FCTF reasoning system, and then demonstrate that it is possible to successfully learn and reason new information. Finally, we use our system to predict practical weather conditions based on previous ones and experiments show that the prediction accuracy increases with further learning of the FCTF reasoning system.

  12. Validation Of Critical Knowledge-Based Systems

    Science.gov (United States)

    Duke, Eugene L.

    1992-01-01

    Report discusses approach to verification and validation of knowledge-based systems. Also known as "expert systems". Concerned mainly with development of methodologies for verification of knowledge-based systems critical to flight-research systems; e.g., fault-tolerant control systems for advanced aircraft. Subject matter also has relevance to knowledge-based systems controlling medical life-support equipment or commuter railroad systems.

  13. Studying Sensing-Based Systems

    DEFF Research Database (Denmark)

    Kjærgaard, Mikkel Baun

    2013-01-01

    Recent sensing-based systems involve a multitude of users, devices, and places. These types of systems challenge existing approaches for conducting valid system evaluations. Here, the author discusses such evaluation challenges and revisits existing system evaluation methodologies....

  14. Introducing Model-Based System Engineering Transforming System Engineering through Model-Based Systems Engineering

    Science.gov (United States)

    2014-03-31

    Web  Presentation...Software  .....................................................  20   Figure  6.  Published   Web  Page  from  Data  Collection...the  term  Model  Based  Engineering  (MBE),  Model  Driven  Engineering  ( MDE ),  or  Model-­‐Based  Systems  

  15. A Systematic Analysis on mRNA and MicroRNA Expression in Runting and Stunting Chickens

    Science.gov (United States)

    Xu, Haiping; Xu, Zhenqiang; Ma, Jinge; Li, Bixiao; Lin, Shudai; Nie, Qinghua; Luo, Qingbin; Zhang, Xiquan

    2015-01-01

    Runting and stunting syndrome (RSS), which is characterized by lower body weight, widely occurs in broilers. Some RSS chickens simply exhibit slow growth without pathological changes. An increasing number of studies indicate that broiler strains differ in susceptibility to infectious diseases, most likely due to their genetic differences. The objective of this study was to detect the differentially expressed miRNAs and mRNAs in RSS and normal chickens. By integrating miRNA with mRNA expression profiling, potential molecular mechanisms involved in RSS could be further explored. Twenty-two known miRNAs and 1,159 genes were differentially expressed in RSS chickens compared with normal chickens (P chicken liver albeit with reduced abundance. Dual-luciferase reporter assay indicated that gga-miR-30b/c directly target CARS through binding to its 3′UTR. The miR-30b/c: CARS regulation mainly occurred in liver. In thigh muscle and the hypothalamus, miR-30b/c are expressed at higher levels in RSS chickens compared with normal chickens from 2 to 6 w of age, and notably significant differences are observed at 4 w of age. PMID:26010155

  16. Photoactivatable Mussel-Based Underwater Adhesive Proteins by an Expanded Genetic Code.

    Science.gov (United States)

    Hauf, Matthias; Richter, Florian; Schneider, Tobias; Faidt, Thomas; Martins, Berta M; Baumann, Tobias; Durkin, Patrick; Dobbek, Holger; Jacobs, Karin; Möglich, Andreas; Budisa, Nediljko

    2017-09-19

    Marine mussels exhibit potent underwater adhesion abilities under hostile conditions by employing 3,4-dihydroxyphenylalanine (DOPA)-rich mussel adhesive proteins (MAPs). However, their recombinant production is a major biotechnological challenge. Herein, a novel strategy based on genetic code expansion has been developed by engineering efficient aminoacyl-transfer RNA synthetases (aaRSs) for the photocaged noncanonical amino acid ortho-nitrobenzyl DOPA (ONB-DOPA). The engineered ONB-DOPARS enables in vivo production of MAP type 5 site-specifically equipped with multiple instances of ONB-DOPA to yield photocaged, spatiotemporally controlled underwater adhesives. Upon exposure to UV light, these proteins feature elevated wet adhesion properties. This concept offers new perspectives for the production of recombinant bioadhesives. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Distributed, cooperating knowledge-based systems

    Science.gov (United States)

    Truszkowski, Walt

    1991-01-01

    Some current research in the development and application of distributed, cooperating knowledge-based systems technology is addressed. The focus of the current research is the spacecraft ground operations environment. The underlying hypothesis is that, because of the increasing size, complexity, and cost of planned systems, conventional procedural approaches to the architecture of automated systems will give way to a more comprehensive knowledge-based approach. A hallmark of these future systems will be the integration of multiple knowledge-based agents which understand the operational goals of the system and cooperate with each other and the humans in the loop to attain the goals. The current work includes the development of a reference model for knowledge-base management, the development of a formal model of cooperating knowledge-based agents, the use of testbed for prototyping and evaluating various knowledge-based concepts, and beginning work on the establishment of an object-oriented model of an intelligent end-to-end (spacecraft to user) system. An introductory discussion of these activities is presented, the major concepts and principles being investigated are highlighted, and their potential use in other application domains is indicated.

  18. Case-Based Fault Diagnostic System

    International Nuclear Information System (INIS)

    Mohamed, A.H.

    2014-01-01

    Nowadays, case-based fault diagnostic (CBFD) systems have become important and widely applied problem solving technologies. They are based on the assumption that “similar faults have similar diagnosis”. On the other hand, CBFD systems still suffer from some limitations. Common ones of them are: (1) failure of CBFD to have the needed diagnosis for the new faults that have no similar cases in the case library. (2) Limited memorization when increasing the number of stored cases in the library. The proposed research introduces incorporating the neural network into the case based system to enable the system to diagnose all the faults. Neural networks have proved their success in the classification and diagnosis problems. The suggested system uses the neural network to diagnose the new faults (cases) that cannot be diagnosed by the traditional CBR diagnostic system. Besides, the proposed system can use the another neural network to control adding and deleting the cases in the library to manage the size of the cases in the case library. However, the suggested system has improved the performance of the case based fault diagnostic system when applied for the motor rolling bearing as a case of study

  19. The Role of Radio Frequency Detection System Embedded Surgical Sponges in Preventing Retained Surgical Sponges: A Prospective Evaluation in Patients Undergoing Emergency Surgery.

    Science.gov (United States)

    Inaba, Kenji; Okoye, Obi; Aksoy, Hande; Skiada, Dimitra; Ault, Glenn; Sener, Stephen; Lam, Lydia; Benjamin, Elizabeth; Demetriades, Demetrios

    2016-10-01

    To prospectively evaluate the ability of radio frequency detection (RFD) system-embedded sponges to mitigate the incidence of retained surgical sponges (RSS) after emergency surgery. Emergency surgery patients are at high risk for retained foreign bodies. All emergent trauma and nontrauma cavitary operations over a 5-year period (January 2010-December 2014) were prospectively enrolled. For damage-control procedures, only the definitive closure was included. RFD sponges were used exclusively throughout the study period. Before closure, the sponge and instrument count was followed by RFD scanning and x-ray evaluation for retained sponges. RSS and near-misses averted using the RFD system were analyzed. In all, 2051 patients [median (range)], aged 41 (1-101) years, 72.2% male, 46.8% trauma patients, underwent 2148 operations (1824 laparotomy, 100 thoracotomy, 30 sternotomy, and 97 combined). RFD detected retained sponges in 11 (0.5%) patients (81.8%laparotomy, 18.2% sternotomy) before cavitary closure. All postclosure x-rays were negative. No retained sponges were missed by the RFD system. Body mass index was 29 (23-43), estimated blood loss 1.0 L (0-23), and operating room time 160 minutes (71-869). Procedures started after 18:00 to 06:00 hours in 45.5% of the patients. The sponge count was incorrect in 36.4%, not performed due to time constraints in 45.5%, and correct in 18.2%. The additional cost of using RFD-embedded disposables was $0.17 for a 4X18 laparotomy sponge and $0.46 for a 10 pack of 12ply, 4X8. Emergent surgical procedures are high-risk for retained sponges, even when sponge counts are performed and found to be correct. Implementation of a RFD system was effective in preventing this complication and should be considered for emergent operations in an effort to improve patient safety.

  20. A dimer of the lymphoid protein RAG1 recognizes the recombination signal sequence and the complex stably incorporates the high mobility group protein HMG2.

    Science.gov (United States)

    Rodgers, K K; Villey, I J; Ptaszek, L; Corbett, E; Schatz, D G; Coleman, J E

    1999-07-15

    RAG1 and RAG2 are the two lymphoid-specific proteins required for the cleavage of DNA sequences known as the recombination signal sequences (RSSs) flanking V, D or J regions of the antigen-binding genes. Previous studies have shown that RAG1 alone is capable of binding to the RSS, whereas RAG2 only binds as a RAG1/RAG2 complex. We have expressed recombinant core RAG1 (amino acids 384-1008) in Escherichia coli and demonstrated catalytic activity when combined with RAG2. This protein was then used to determine its oligomeric forms and the dissociation constant of binding to the RSS. Electrophoretic mobility shift assays show that up to three oligomeric complexes of core RAG1 form with a single RSS. Core RAG1 was found to exist as a dimer both when free in solution and as the minimal species bound to the RSS. Competition assays show that RAG1 recognizes both the conserved nonamer and heptamer sequences of the RSS. Zinc analysis shows the core to contain two zinc ions. The purified RAG1 protein overexpressed in E.coli exhibited the expected cleavage activity when combined with RAG2 purified from transfected 293T cells. The high mobility group protein HMG2 is stably incorporated into the recombinant RAG1/RSS complex and can increase the affinity of RAG1 for the RSS in the absence of RAG2.

  1. EPICS based DAQ system

    International Nuclear Information System (INIS)

    Cheng Weixing; Chen Yongzhong; Zhou Weimin; Ye Kairong; Liu Dekang

    2002-01-01

    EPICS is the most popular developing platform to build control system and beam diagnostic system in modern physics experiment facilities. An EPICS based data acquisition system was built in Redhat 6.2 operation system. The system is successfully used in the beam position monitor mapping, it improves the mapping process a lot

  2. System Based Code: Principal Concept

    International Nuclear Information System (INIS)

    Yasuhide Asada; Masanori Tashimo; Masahiro Ueta

    2002-01-01

    This paper introduces a concept of the 'System Based Code' which has initially been proposed by the authors intending to give nuclear industry a leap of progress in the system reliability, performance improvement, and cost reduction. The concept of the System Based Code intends to give a theoretical procedure to optimize the reliability of the system by administrating every related engineering requirement throughout the life of the system from design to decommissioning. (authors)

  3. Airborne relay-based regional positioning system.

    Science.gov (United States)

    Lee, Kyuman; Noh, Hongjun; Lim, Jaesung

    2015-05-28

    Ground-based pseudolite systems have some limitations, such as low vertical accuracy, multipath effects and near-far problems. These problems are not significant in airborne-based pseudolite systems. However, the monitoring of pseudolite positions is required because of the mobility of the platforms on which the pseudolites are mounted, and this causes performance degradation. To address these pseudolite system limitations, we propose an airborne relay-based regional positioning system that consists of a master station, reference stations, airborne relays and a user. In the proposed system, navigation signals are generated from the reference stations located on the ground and are relayed via the airborne relays. Unlike in conventional airborne-based systems, the user in the proposed system sequentially estimates both the locations of airborne relays and his/her own position. Therefore, a delay due to monitoring does not occur, and the accuracy is not affected by the movement of airborne relays. We conducted several simulations to evaluate the performance of the proposed system. Based on the simulation results, we demonstrated that the proposed system guarantees a higher accuracy than airborne-based pseudolite systems, and it is feasible despite the existence of clock offsets among reference stations.

  4. Essential nontranslational functions of tRNA synthetases.

    Science.gov (United States)

    Guo, Min; Schimmel, Paul

    2013-03-01

    Nontranslational functions of vertebrate aminoacyl tRNA synthetases (aaRSs), which catalyze the production of aminoacyl-tRNAs for protein synthesis, have recently been discovered. Although these new functions were thought to be 'moonlighting activities', many are as critical for cellular homeostasis as their activity in translation. New roles have been associated with their cytoplasmic forms as well as with nuclear and secreted extracellular forms that affect pathways for cardiovascular development and the immune response and mTOR, IFN-γ and p53 signaling. The associations of aaRSs with autoimmune disorders, cancers and neurological disorders further highlight nontranslational functions of these proteins. New architecture elaborations of the aaRSs accompany their functional expansion in higher organisms and have been associated with the nontranslational functions for several aaRSs. Although a general understanding of how these functions developed is limited, the expropriation of aaRSs for essential nontranslational functions may have been initiated by co-opting the amino acid-binding site for another purpose.

  5. Essential Non-Translational Functions of tRNA Synthetases

    Science.gov (United States)

    Guo, Min; Schimmel, Paul

    2013-01-01

    Nontranslational functions of vertebrate aminoacyl tRNA synthetases (aaRSs), which catalyze the production of aminoacyl-tRNAs for protein synthesis, have recently been discovered. While these new functions were thought to be ‘moonlighting activities’, many are as critical for cellular homeostasis as the activity in translation. New roles have been associated with cytoplasmic forms as well as with nuclear and secreted extracellular forms that impact pathways for cardiovascular development, the immune response, and mTOR, IFN-γ and p53 signaling. The associations of aaRSs with autoimmune disorders, cancers and neurological disorders further highlight nontranslational functions of these proteins. Novel architecture elaborations of the aaRSs accompany their functional expansion in higher organisms and have been associated with the nontranslational functions for several aaRSs. While a general understanding of how these functions developed is limited, the expropriation of aaRSs for essential nontranslational functions may have been initiated by co-opting the amino acid binding site for another purpose. PMID:23416400

  6. AirNow Information Management System - Global Earth Observation System of Systems Data Processor for Real-Time Air Quality Data Products

    Science.gov (United States)

    Haderman, M.; Dye, T. S.; White, J. E.; Dickerson, P.; Pasch, A. N.; Miller, D. S.; Chan, A. C.

    2012-12-01

    Built upon the success of the U.S. Environmental Protection Agency's (EPA) AirNow program (www.AirNow.gov), the AirNow-International (AirNow-I) system contains an enhanced suite of software programs that process and quality control real-time air quality and environmental data and distribute customized maps, files, and data feeds. The goals of the AirNow-I program are similar to those of the successful U.S. program and include fostering the exchange of environmental data; making advances in air quality knowledge and applications; and building a community of people, organizations, and decision makers in environmental management. In 2010, Shanghai became the first city in China to run this state-of-the-art air quality data management and notification system. AirNow-I consists of a suite of modules (software programs and schedulers) centered on a database. One such module is the Information Management System (IMS), which can automatically produce maps and other data products through the use of GIS software to provide the most current air quality information to the public. Developed with Global Earth Observation System of Systems (GEOSS) interoperability in mind, IMS is based on non-proprietary standards, with preference to formal international standards. The system depends on data and information providers accepting and implementing a set of interoperability arrangements, including technical specifications for collecting, processing, storing, and disseminating shared data, metadata, and products. In particular, the specifications include standards for service-oriented architecture and web-based interfaces, such as a web mapping service (WMS), web coverage service (WCS), web feature service (WFS), sensor web services, and Really Simple Syndication (RSS) feeds. IMS is flexible, open, redundant, and modular. It also allows the merging of data grids to create complex grids that show comprehensive air quality conditions. For example, the AirNow Satellite Data Processor

  7. Methylation profiling in individuals with Russell-Silver syndrome.

    Science.gov (United States)

    Peñaherrera, Maria S; Weindler, Susanne; Van Allen, Margot I; Yong, Siu-Li; Metzger, Daniel L; McGillivray, Barbara; Boerkoel, Cornelius; Langlois, Sylvie; Robinson, Wendy P

    2010-02-01

    Russell-Silver syndrome (RSS) is a heterogeneous disorder associated with pre- and post-natal growth restriction and relative macrocephaly. Involvement of imprinted genes on both chromosome 7 and 11p15.5 has been reported. To further characterize the role of epimutations in RSS we evaluated the methylation status at both 11p15.5 imprinting control regions (ICRs): ICR1 associated with H19/IGF2 expression and ICR2 (KvDMR1) associated with CDKN1C expression in a series of 35 patients with RSS. We also evaluated methylation at the promoter regions of other imprinted genes involved in growth such as PLAGL1 (6q24), GCE (7q21), and PEG10 (7q21) in this series of 35 patients with RSS. Thirteen of the 35 patient samples, but none of 22 controls, showed methylation levels at ICR1 that were more than 2 SD below the mean for controls. Three RSS patients were highly methylated at the SCGE promoter, all of which were diagnosed with upd(7)mat. To identify further potential global methylation changes in RSS patients, a subset of 22 patients were evaluated at 1505 CpG sites by the Illumina GoldenGate methylation array. Among the few CpG sites displaying a significant difference between RSS patients and controls, was a CpG associated with the H19 promoter. No other sites associated with known imprinted genes were identified as abnormally methylated in RSS patients by this approach. While the association of hypomethylation of the H19/IGF2 ICR1 is clear, the continuous distribution of methylation values among the patients and controls complicates the establishment of clear cut-offs for clinical diagnosis. Copyright 2010 Wiley-Liss, Inc.

  8. LANSCE beam current limiter

    International Nuclear Information System (INIS)

    Gallegos, F.R.

    1996-01-01

    The Radiation Security System (RSS) at the Los Alamos Neutron Science Center (LANSCE) provides personnel protection from prompt radiation due to accelerated beam. Active instrumentation, such as the Beam Current Limiter, is a component of the RSS. The current limiter is designed to limit the average current in a beam line below a specific level, thus minimizing the maximum current available for a beam spill accident. The beam current limiter is a self-contained, electrically isolated toroidal beam transformer which continuously monitors beam current. It is designed as fail-safe instrumentation. The design philosophy, hardware design, operation, and limitations of the device are described

  9. Airborne Atmospheric Aerosol Measurement System

    Science.gov (United States)

    Ahn, K.; Park, Y.; Eun, H.; Lee, H.

    2015-12-01

    It is important to understand the atmospheric aerosols compositions and size distributions since they greatly affect the environment and human health. Particles in the convection layer have been a great concern in global climate changes. To understand these characteristics satellite, aircraft, and radio sonde measurement methods have usually been used. An aircraft aerosol sampling using a filter and/or impactor was the method commonly used (Jay, 2003). However, the flight speed particle sampling had some technical limitations (Hermann, 2001). Moreover, the flight legal limit, altitude, prohibited airspace, flight time, and cost was another demerit. To overcome some of these restrictions, Tethered Balloon Package System (T.B.P.S.) and Recoverable Sonde System(R.S.S.) were developed with a very light optical particle counter (OPC), impactor, and condensation particle counter (CPC). Not only does it collect and measure atmospheric aerosols depending on altitudes, but it also monitors the atmospheric conditions, temperature, humidity, wind velocity, pressure, GPS data, during the measurement (Eun, 2013). In this research, atmospheric aerosol measurement using T.B.P.S. in Ansan area is performed and the measurement results will be presented. The system can also be mounted to an unmanned aerial vehicle (UAV) and create an aerial particle concentration map. Finally, we will present measurement data using Tethered Balloon Package System (T.B.P.S.) and R.S.S (Recoverable Sonde System).

  10. Securing Metering Infrastructure of Smart Grid: A Machine Learning and Localization Based Key Management Approach

    Directory of Open Access Journals (Sweden)

    Imtiaz Parvez

    2016-08-01

    Full Text Available In smart cities, advanced metering infrastructure (AMI of the smart grid facilitates automated metering, control and monitoring of power distribution by employing a wireless network. Due to this wireless nature of communication, there exist potential threats to the data privacy in AMI. Decoding the energy consumption reading, injecting false data/command signals and jamming the networks are some hazardous measures against this technology. Since a smart meter possesses limited memory and computational capability, AMI demands a light, but robust security scheme. In this paper, we propose a localization-based key management system for meter data encryption. Data are encrypted by the key associated with the coordinate of the meter and a random key index. The encryption keys are managed and distributed by a trusted third party (TTP. Localization of the meter is proposed by a method based on received signal strength (RSS using the maximum likelihood estimator (MLE. The received packets are decrypted at the control center with the key mapped with the key index and the meter’s coordinates. Additionally, we propose the k-nearest neighbors (kNN algorithm for node/meter authentication, capitalizing further on data transmission security. Finally, we evaluate the security strength of a data packet numerically for our method.

  11. Bluetooth-based distributed measurement system

    International Nuclear Information System (INIS)

    Tang Baoping; Chen Zhuo; Wei Yuguo; Qin Xiaofeng

    2007-01-01

    A novel distributed wireless measurement system, which is consisted of a base station, wireless intelligent sensors and relay nodes etc, is established by combining of Bluetooth-based wireless transmission, virtual instrument, intelligent sensor, and network. The intelligent sensors mounted on the equipments to be measured acquire various parameters and the Bluetooth relay nodes get the acquired data modulated and sent to the base station, where data analysis and processing are done so that the operational condition of the equipment can be evaluated. The establishment of the distributed measurement system is discussed with a measurement flow chart for the distributed measurement system based on Bluetooth technology, and the advantages and disadvantages of the system are analyzed at the end of the paper and the measurement system has successfully been used in Daqing oilfield, China for measurement of parameters, such as temperature, flow rate and oil pressure at an electromotor-pump unit

  12. Bluetooth-based distributed measurement system

    Science.gov (United States)

    Tang, Baoping; Chen, Zhuo; Wei, Yuguo; Qin, Xiaofeng

    2007-07-01

    A novel distributed wireless measurement system, which is consisted of a base station, wireless intelligent sensors and relay nodes etc, is established by combining of Bluetooth-based wireless transmission, virtual instrument, intelligent sensor, and network. The intelligent sensors mounted on the equipments to be measured acquire various parameters and the Bluetooth relay nodes get the acquired data modulated and sent to the base station, where data analysis and processing are done so that the operational condition of the equipment can be evaluated. The establishment of the distributed measurement system is discussed with a measurement flow chart for the distributed measurement system based on Bluetooth technology, and the advantages and disadvantages of the system are analyzed at the end of the paper and the measurement system has successfully been used in Daqing oilfield, China for measurement of parameters, such as temperature, flow rate and oil pressure at an electromotor-pump unit.

  13. Bluetooth-based distributed measurement system

    Energy Technology Data Exchange (ETDEWEB)

    Tang Baoping; Chen Zhuo; Wei Yuguo; Qin Xiaofeng [Department of Mechatronics, College of Mechanical Engineering, Chongqing University, Chongqing, 400030 (China)

    2007-07-15

    A novel distributed wireless measurement system, which is consisted of a base station, wireless intelligent sensors and relay nodes etc, is established by combining of Bluetooth-based wireless transmission, virtual instrument, intelligent sensor, and network. The intelligent sensors mounted on the equipments to be measured acquire various parameters and the Bluetooth relay nodes get the acquired data modulated and sent to the base station, where data analysis and processing are done so that the operational condition of the equipment can be evaluated. The establishment of the distributed measurement system is discussed with a measurement flow chart for the distributed measurement system based on Bluetooth technology, and the advantages and disadvantages of the system are analyzed at the end of the paper and the measurement system has successfully been used in Daqing oilfield, China for measurement of parameters, such as temperature, flow rate and oil pressure at an electromotor-pump unit.

  14. SPIRE Data-Base Management System

    Science.gov (United States)

    Fuechsel, C. F.

    1984-01-01

    Spacelab Payload Integration and Rocket Experiment (SPIRE) data-base management system (DBMS) based on relational model of data bases. Data bases typically used for engineering and mission analysis tasks and, unlike most commercially available systems, allow data items and data structures stored in forms suitable for direct analytical computation. SPIRE DBMS designed to support data requests from interactive users as well as applications programs.

  15. Transabdominal Migration of Retained Surgical Sponge

    Directory of Open Access Journals (Sweden)

    Ali Guner

    2012-01-01

    Full Text Available Retained surgical sponge (RSS is a rare surgical complication. The RSSs are mostly located intra-abdominally but they can also be left in the thorax, spine, extremity, cranium, and breast. RSS is often difficult to diagnose because of the nonspecific clinical symptoms and radiologic findings. Clinically, RSS may present as an exudative reaction in the early postoperative period or may also cause an aseptic fibrous tissue response. A foreign body may remain asymptomatically silent for a long time, and it may later present with obstruction, fistulization, or mass formation. In this report, we present a case in which an RSS has migrated through the abdominal wall and caused an anterior abdominal wall abscess.

  16. FPGA-Based Plant Protection System

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yoon Hee; Ha, Jae Hong; Kim, Hang Bae [KEPCO E and C, Daejeon (Korea, Republic of)

    2011-08-15

    This paper relates to a plant protection system which detects non-permissible conditions and determines initiation of protective actions for nuclear power plants (NPPs). Conventional plant protection systems were designed based on analog technologies. It is well known that existing protection systems for NPPs contain many components which are becoming obsolete at an increasing rate. Nowadays maintenance and repair for analog-based plant protection systems may be difficult as analog parts become obsolete or difficult to obtain. Accordingly, as an alternative to the analog technology, the digitalisation of the plant protection system was required. Recently digital plant protection systems which include programmable logic controllers (PLCs) and/or computers have been introduced. However PLC or computer-based plant protection systems use an operating system and application software, and so they may result in a common mode failure when a problem occurs in the operating system or application software. Field Programmable Gate Arrays (FPGAs) are highlighted as an alternative to conventional protection or control systems. The paper presents the design of a four-channel plant protection system whose protection functions are implemented in FPGAs without any central processing unit or operating system.

  17. FPGA-Based Plant Protection System

    International Nuclear Information System (INIS)

    Lee, Yoon Hee; Ha, Jae Hong; Kim, Hang Bae

    2011-01-01

    This paper relates to a plant protection system which detects non-permissible conditions and determines initiation of protective actions for nuclear power plants (NPPs). Conventional plant protection systems were designed based on analog technologies. It is well known that existing protection systems for NPPs contain many components which are becoming obsolete at an increasing rate. Nowadays maintenance and repair for analog-based plant protection systems may be difficult as analog parts become obsolete or difficult to obtain. Accordingly, as an alternative to the analog technology, the digitalisation of the plant protection system was required. Recently digital plant protection systems which include programmable logic controllers (PLCs) and/or computers have been introduced. However PLC or computer-based plant protection systems use an operating system and application software, and so they may result in a common mode failure when a problem occurs in the operating system or application software. Field Programmable Gate Arrays (FPGAs) are highlighted as an alternative to conventional protection or control systems. The paper presents the design of a four-channel plant protection system whose protection functions are implemented in FPGAs without any central processing unit or operating system

  18. Operator coil monitoring Acceptance Test Procedure

    International Nuclear Information System (INIS)

    Erhart, M.F.

    1995-01-01

    The readiness of the Data Acquisition and Control System (DACS) to provide monitoring and control of the Programmable Logic Controller (PLC) abort coils from the Master and RSS stations will be systematically tested during performance of this procedure. It should be noted that these are not physical abort coils but software coils controlled by the software's ladder logic. The readiness of the DACS to properly interface with the ENRAF wire level gauge installed in the SY-101 storage tank will also be tested. During this test, a verification of all abort coil indications will be conducted at the DACS Development Facility in the 306E Building by injecting an input signal for each DACS sensor that has an associated abort coil until the abort coil actuates, and then ensuring that the status of the abort coil indicated at the Master and RSS stations is correct. Each abort coil will also be tested to ensure that the ''ENABLE'' and ''DISABLE'' controls from the Master and RSS stations function correctly, and only with the use of proper passwords

  19. Recent developments in affective recommender systems

    Science.gov (United States)

    Katarya, Rahul; Verma, Om Prakash

    2016-11-01

    Recommender systems (RSs) are playing a significant role since 1990s as they provide relevant, personalized information to the users over the internet. Lots of work have been done in information filtering, utilization, and application related to RS. However, an important area recently draws our attention which is affective recommender system. Affective recommender system (ARS) is latest trending area of research, as publication in this domain are few and recently published. ARS is associated with human behaviour, human factors, mood, senses, emotions, facial expressions, body gesture and physiological with human-computer interaction (HCI). Due to this assortment and various interests, more explanation is required, as it is in premature phase and growing as compared to other fields. So we have done literature review (LR) in the affective recommender systems by doing classification, incorporate reputed articles published from the year 2003 to February 2016. We include articles which highlight, analyse, and perform a study on affective recommender systems. This article categorizes, synthesizes, and discusses the research and development in ARS. We have classified and managed ARS papers according to different perspectives: research gaps, nature, algorithm or method adopted, datasets, the platform on executed, types of information and evaluation techniques applied. The researchers and professionals will positively support this survey article for understanding the current position, research in affective recommender systems and will guide future trends, opportunity and research focus in ARS.

  20. Environmental Information Management For Data Discovery and Access System

    Science.gov (United States)

    Giriprakash, P.

    2011-01-01

    Mercury is a federated metadata harvesting, search and retrieval tool based on both open source software and software developed at Oak Ridge National Laboratory. It was originally developed for NASA, and the Mercury development consortium now includes funding from NASA, USGS, and DOE. A major new version of Mercury was developed during 2007 and released in early 2008. This new version provides orders of magnitude improvements in search speed, support for additional metadata formats, integration with Google Maps for spatial queries, support for RSS delivery of search results, and ready customization to meet the needs of the multiple projects which use Mercury. For the end users, Mercury provides a single portal to very quickly search for data and information contained in disparate data management systems. It collects metadata and key data from contributing project servers distributed around the world and builds a centralized index. The Mercury search interfaces then allow ! the users to perform simple, fielded, spatial and temporal searches across these metadata sources. This centralized repository of metadata with distributed data sources provides extremely fast search results to the user, while allowing data providers to advertise the availability of their data and maintain complete control and ownership of that data.

  1. Programming languages and operating systems used in data base systems

    International Nuclear Information System (INIS)

    Radulescu, T.G.

    1977-06-01

    Some apsects of the use of the programming languages and operating systems in the data base systems are presented. There are four chapters in this paper. In the first chapter we present some generalities about the programming languages. In the second one we describe the use of the programming languages in the data base systems. A classification of the programming languages used in data base systems is presented in the third one. An overview of the operating systems is made in the last chapter. (author)

  2. SPECT detector system design based on embedded system

    International Nuclear Information System (INIS)

    Zhang Weizheng; Zhao Shujun; Zhang Lei; Sun Yuanling

    2007-01-01

    A single-photon emission computed tomography detector system based on embedded Linux designed. This system is composed of detector module, data acquisition module, ARM MPU module, network interface communication module and human machine interface module. Its software uses multithreading technology based on embedded Linux. It can achieve high speed data acquisition, real-time data correction and network data communication. It can accelerate the data acquisition and decrease the dead time. The accuracy and the stability of the system can be improved. (authors)

  3. Radiation monitoring system based on Internet

    International Nuclear Information System (INIS)

    Drndarevic, V.R.; Popovic, A.T; Bolic, M.D.; Pavlovic, R.S.

    2001-01-01

    This paper presents concept and realization of the modern distributed radiation monitoring system. The system uses existing conventional computer network and it is based on the standard Internet technology. One personal computer (PC) serves as host and system server, while a number of client computers, link to the server computer via standard local area network (LAN), are used as distributed measurement nodes. The interconnection between the server and clients are based on Transmission Control Protocol/Internet Protocol (TCP/IP). System software is based on server-client model. Based on this concept distributed system for gamma ray monitoring in the region of the Institute of Nuclear Sciences Vinca has been implemented. (author)

  4. Knowledge-based diagnosis for aerospace systems

    Science.gov (United States)

    Atkinson, David J.

    1988-01-01

    The need for automated diagnosis in aerospace systems and the approach of using knowledge-based systems are examined. Research issues in knowledge-based diagnosis which are important for aerospace applications are treated along with a review of recent relevant research developments in Artificial Intelligence. The design and operation of some existing knowledge-based diagnosis systems are described. The systems described and compared include the LES expert system for liquid oxygen loading at NASA Kennedy Space Center, the FAITH diagnosis system developed at the Jet Propulsion Laboratory, the PES procedural expert system developed at SRI International, the CSRL approach developed at Ohio State University, the StarPlan system developed by Ford Aerospace, the IDM integrated diagnostic model, and the DRAPhys diagnostic system developed at NASA Langley Research Center.

  5. Qt based GUI system for EPICS control systems

    International Nuclear Information System (INIS)

    Rhyder, A.; Fernandes, R.N.; Starritt, A.

    2012-01-01

    The Qt-based GUI system developed at the Australian Synchrotron for use on EPICS control systems has recently been enhanced to including support for imaging, plotting, user login, logging and configuration recipes. Plans are also being made to broaden its appeal within the wider EPICS community by expanding the range of development options and adding support for EPICS V4. Current features include graphical and non-graphical application development as well as simple 'code-free' GUI design. Additional features will allow developers to let the GUI system handle its own data using Qt-based EPICS-aware classes or, as an alternative, use other control systems data such as PSI's CAFE. (author)

  6. Process fault diagnosis using knowledge-based systems

    International Nuclear Information System (INIS)

    Sudduth, A.L.

    1991-01-01

    Advancing technology in process plants has led to increased need for computer based process diagnostic systems to assist the operator. One approach to this problem is to use an embedded knowledge based system to interpret measurement signals. Knowledge based systems using only symptom based rules are inadequate for real time diagnosis of dynamic systems; therefore a model based approach is necessary. Though several forms of model based reasoning have been proposed, the use of qualitative causal models incorporating first principles knowledge of process behavior structure, and function appear to have the most promise as a robust modeling methodology. In this paper the structure of a diagnostic system is described which uses model based reasoning and conventional numerical methods to perform process diagnosis. This system is being applied to emergency diesel generator system in nuclear stations

  7. Democratization in Albania: The OSCE, NATO and the European Union

    Science.gov (United States)

    2010-06-01

    html? maca =en-rss-en-all-1573-rdf (accessed 4 March 2010). 263 Manuel Montobbio de Balanzo, Spanish Ambassador to Albania, http://www.dw- world.de/dw...article/0,,5259561,00.html? maca =en-rss-en-all-1573-rdf (accessed 4 March 2010). 264 Reinhard Priebe, The Western Balkan European Perspective, http...world.de/dw/article/0,,5259561,00.html? maca =en-rss-en-all-1573-rdf (accessed 4 March 2010). European Commission Enlargement, Albania – Questions

  8. Model-based version management system framework

    International Nuclear Information System (INIS)

    Mehmood, W.

    2016-01-01

    In this paper we present a model-based version management system. Version Management System (VMS) a branch of software configuration management (SCM) aims to provide a controlling mechanism for evolution of software artifacts created during software development process. Controlling the evolution requires many activities to perform, such as, construction and creation of versions, identification of differences between versions, conflict detection and merging. Traditional VMS systems are file-based and consider software systems as a set of text files. File based VMS systems are not adequate for performing software configuration management activities such as, version control on software artifacts produced in earlier phases of the software life cycle. New challenges of model differencing, merge, and evolution control arise while using models as central artifact. The goal of this work is to present a generic framework model-based VMS which can be used to overcome the problem of tradition file-based VMS systems and provide model versioning services. (author)

  9. Performance of WLAN RSS-based SON for LTE/WLAN access network selection

    NARCIS (Netherlands)

    Wang, Y.; Djapic, R.; Bergström, A.; Kovács, I.Z.; Laselva, D.; Spaey, K.; Sas, B.

    2014-01-01

    Mobile Network Operators (MNOs) are integrating carrier-grade Wireless Local Area Network (WLAN) to cellular networks to improve network performance and user experience. Access network selection (ANS) between cellular and WLAN plays a key role in the integration. Given the complexity of

  10. A Database-Based and Web-Based Meta-CASE System

    Science.gov (United States)

    Eessaar, Erki; Sgirka, Rünno

    Each Computer Aided Software Engineering (CASE) system provides support to a software process or specific tasks or activities that are part of a software process. Each meta-CASE system allows us to create new CASE systems. The creators of a new CASE system have to specify abstract syntax of the language that is used in the system and functionality as well as non-functional properties of the new system. Many meta-CASE systems record their data directly in files. In this paper, we introduce a meta-CASE system, the enabling technology of which is an object-relational database system (ORDBMS). The system allows users to manage specifications of languages and create models by using these languages. The system has web-based and form-based user interface. We have created a proof-of-concept prototype of the system by using PostgreSQL ORDBMS and PHP scripting language.

  11. The set valued unified model of dispersion and attenuation for wave propagation in dielectric (and anelastic media

    Directory of Open Access Journals (Sweden)

    M. Caputo

    1998-06-01

    Full Text Available Since the dispersion and attenuation properties of dielectric and anelastic media, in the frequency domain, are expressed by similar formulae, as shown experimentally by Cole and Cole (1941 and Bagley and Torvik (1983, 1986 respectively, we note that the same properties may be represented in the time domain by means of an equation of the same form; this is obtained by introducing derivatives of fractional order into the system functions of the media. The Laplace Transforms (LT of such system functions contain fractional powers of the imaginary frequency and are, therefore, multivalued functions defined in the Riemann Sheets (RS of the function. We determine the response of the medium (dielectric o anelastic to a generic signal summing the time domain representation due to the branches of the solutions in the RSs of the LT. It is found that, if the initial conditions are equal in all the RSs, the solution is a sum of two exponentials with complex exponents, if the initial conditions are different in some of the RSs, then a transient for each of those RSs is added to the exponentials. In all cases a monochromatic wave is split into a set of waves with the same frequency and slightly different wavelengths which interfere and disperse. As a consequence a monochromatic electromagnetic wave with frequency around 1 MHz in water has a relevant dispersion and beats generating a tunnel effect. In the atmosphere of the Earth the dispersion of a monochromatic wave with frequency around 1 GHz, like those used in tracking artificial satellites, has a negligible effect on the accuracy of the determination of the position of the satellites and the positioning of the bench marks on the Earth. We also find the split eigenfunctions of the free modes of infinite plates and shells made of dielectric and anelastic media.

  12. Advantages of early diagnosis of diabetic neuropathy in the prevention of diabetic foot ulcers.

    Science.gov (United States)

    Sanz-Corbalán, Irene; Lázaro-Martínez, José Luis; García-Morales, Esther; Molines-Barroso, Raúl; Álvaro-Afonso, Francisco; García-Álvarez, Yolanda

    2017-12-26

    to evaluate the utility of the sudomotor function test (SFT) as a clinical tool in the Risk Stratification System of diabetic patients and to demonstrate the earlier detection of the risk of developing diabetic foot ulcers (DFU) compared to the standard clinical tests. prospective follow-up study on 263 patients enrolled consecutively over 3.5 years. Diabetic patients without active DFU were classified according to the International Working Group Risk Stratification System (RSS) and categorized according to the results of the Semmes-Wenstein Monofilament (SWM) and biothesiometer measurements or the SFT. The main outcome evaluated was the development of DFU. median follow-up was 42 [38-44] months. Sixty patients (22.8%) developed DFU after a median of 6.2 [3-17] months. Ten patients that were included in the no-risk group (group 0) based on the SWM and biothesiometer results developed DFU. Thus the sensitivity of this approach was 83.33% and the specificity was 50.47%. Based on the SFT results, all patients that developed DFU were included in the correct risk group. This approach had 100% sensitivity and 31.53% specificity. Regarding the diagnostic accuracy of the two Methods, the respective AUC values were 0.776 (95% CI 0.702-0.849) and 0.816 (95% CI 0.757-0.874). SFT improved RSS in diabetic patients in a specialized diabetic foot unit. SFT categorized patients correctly according to the risk of developing DFU. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. A Web-Based Learning Support System for Inquiry-Based Learning

    Science.gov (United States)

    Kim, Dong Won; Yao, Jingtao

    The emergence of the Internet and Web technology makes it possible to implement the ideals of inquiry-based learning, in which students seek truth, information, or knowledge by questioning. Web-based learning support systems can provide a good framework for inquiry-based learning. This article presents a study on a Web-based learning support system called Online Treasure Hunt. The Web-based learning support system mainly consists of a teaching support subsystem, a learning support subsystem, and a treasure hunt game. The teaching support subsystem allows instructors to design their own inquiry-based learning environments. The learning support subsystem supports students' inquiry activities. The treasure hunt game enables students to investigate new knowledge, develop ideas, and review their findings. Online Treasure Hunt complies with a treasure hunt model. The treasure hunt model formalizes a general treasure hunt game to contain the learning strategies of inquiry-based learning. This Web-based learning support system empowered with the online-learning game and founded on the sound learning strategies furnishes students with the interactive and collaborative student-centered learning environment.

  14. Autonomous power networks based power system

    International Nuclear Information System (INIS)

    Jokic, A.; Van den Bosch, P.P.J.

    2006-01-01

    This paper presented the concept of autonomous networks to cope with this increased complexity in power systems while enhancing market-based operation. The operation of future power systems will be more challenging and demanding than present systems because of increased uncertainties, less inertia in the system, replacement of centralized coordinating activities by decentralized parties and the reliance on dynamic markets for both power balancing and system reliability. An autonomous network includes the aggregation of networked producers and consumers in a relatively small area with respect to the overall system. The operation of an autonomous network is coordinated and controlled with one central unit acting as an interface between internal producers/consumers and the rest of the power system. In this study, the power balance problem and system reliability through provision of ancillary services was formulated as an optimization problem for the overall autonomous networks based power system. This paper described the simulation of an optimal autonomous network dispatching in day ahead markets, based on predicted spot prices for real power, and two ancillary services. It was concluded that large changes occur in a power systems structure and operation, most of them adding to the uncertainty and complexity of the system. The introduced concept of an autonomous power network-based power system was shown to be a realistic and consistent approach to formulate and operate a market-based dispatch of both power and ancillary services. 9 refs., 4 figs

  15. MedlinePlus Milestones: 1998-present

    Science.gov (United States)

    ... Connect , a service linking patients or providers in electronic health record (EHR) systems to related MedlinePlus information on conditions ... updates Subscribe to RSS Follow us Disclaimers Copyright Privacy Accessibility Quality Guidelines Viewers & Players MedlinePlus Connect for ...

  16. Repetitive tactile stimulation changes resting-state functional connectivity – implications for treatment of sensorimotor decline

    Directory of Open Access Journals (Sweden)

    Frank eFreyer

    2012-05-01

    Full Text Available Neurological disorders and physiological aging can lead to a decline of perceptual abilities. In contrast to the conventional therapeutic approach that comprises intensive training and practicing, passive repetitive sensory stimulation (RSS has recently gained increasing attention as an alternative to countervail the sensory decline by improving perceptual abilities without the need of active participation. A particularly effective type of high-frequency RSS, utilizing Hebbian learning principles, improves perceptual acuity as well as sensorimotor functions and has been successfully applied to treat chronic stroke patients and elderly subjects. High-frequency RSS has been shown to induce plastic changes of somatosensory cortex such as representational map reorganization, but its impact on the brain’s ongoing network activity and resting-state functional connectivity has not been investigated so far. Here, we applied high-frequency RSS in healthy human subjects and analyzed resting state Electroencephalography (EEG functional connectivity patterns before and after RSS by means of imaginary coherency (ImCoh, a frequency-specific connectivity measure which is known to reduce overestimation biases due to volume conduction and common reference. Thirty minutes of passive high-frequency RSS lead to significant ImCoh-changes of the resting state mu-rhythm in the individual upper alpha frequency band within distributed sensory and motor cortical areas. These stimulation induced distributed functional connectivity changes likely underlie the previously observed improvement in sensorimotor integration.

  17. The Use of the Risky Sex Scale among Adolescents Receiving Treatment Services for Substance Use Problems: Factor Structure and Predictive Validity

    Science.gov (United States)

    Tubman, Jonathan G.; Des Rosiers, Sabrina E.; Schwartz, Seth J.; O'Hare, Thomas

    2015-01-01

    The present study evaluated the use of the Risky Sex Scale (RSS; O'Hare, 2001) among youth in outpatient treatment for substance use problems. An ethnically diverse sample of 394 adolescents (280 males; Mage = 16.33 years, SDage = 1.15) was recruited from two treatment sites. The study was guided by two aims. First, a confirmatory factor analysis was conducted on RSS item responses. Findings replicated the factor structure identified in previous studies of undergraduate students cited for campus alcohol violations. Second, structural equation modeling (SEM) was used to document associations between RSS subscales and self-reported substance use and sexual risk behaviors. The Risky Sex Expectancies (RSE) subscale was significantly associated with co-occurring alcohol use and sex, alcohol use at last intercourse, and alcohol use during the prior 30 days. The Risky Sex Behaviors (RSB) subscale was significantly associated with cooccurring drug use and sex, condom use at last intercourse and unprotected intercourse during the prior 30 days. The factor structure of the RSS was consistent across age group (12-16 and 16- 18) and across gender, and the links between the RSS subscales and health risk behaviors varied somewhat by gender but not by age group. These findings suggest that the RSS is an appropriate brief screening tool for predicting health risk behaviors among adolescents in substance abuse treatment. PMID:22425202

  18. Dystonia

    Science.gov (United States)

    ... eRA) Grants Policy OER News About OER Research Contracts Loan Repayment News News Releases News Feed RSS ... of dystonia – based in some cases on the manipulation of the genes linked to the disorder in ...

  19. An Ontology-Based Tourism Recommender System Based on Spreading Activation Model

    Science.gov (United States)

    Bahramian, Z.; Abbaspour, R. Ali

    2015-12-01

    A tourist has time and budget limitations; hence, he needs to select points of interest (POIs) optimally. Since the available information about POIs is overloading, it is difficult for a tourist to select the most appreciate ones considering preferences. In this paper, a new travel recommender system is proposed to overcome information overload problem. A recommender system (RS) evaluates the overwhelming number of POIs and provides personalized recommendations to users based on their preferences. A content-based recommendation system is proposed, which uses the information about the user's preferences and POIs and calculates a degree of similarity between them. It selects POIs, which have highest similarity with the user's preferences. The proposed content-based recommender system is enhanced using the ontological information about tourism domain to represent both the user profile and the recommendable POIs. The proposed ontology-based recommendation process is performed in three steps including: ontology-based content analyzer, ontology-based profile learner, and ontology-based filtering component. User's feedback adapts the user's preferences using Spreading Activation (SA) strategy. It shows the proposed recommender system is effective and improves the overall performance of the traditional content-based recommender systems.

  20. AN ONTOLOGY-BASED TOURISM RECOMMENDER SYSTEM BASED ON SPREADING ACTIVATION MODEL

    Directory of Open Access Journals (Sweden)

    Z. Bahramian

    2015-12-01

    Full Text Available A tourist has time and budget limitations; hence, he needs to select points of interest (POIs optimally. Since the available information about POIs is overloading, it is difficult for a tourist to select the most appreciate ones considering preferences. In this paper, a new travel recommender system is proposed to overcome information overload problem. A recommender system (RS evaluates the overwhelming number of POIs and provides personalized recommendations to users based on their preferences. A content-based recommendation system is proposed, which uses the information about the user’s preferences and POIs and calculates a degree of similarity between them. It selects POIs, which have highest similarity with the user’s preferences. The proposed content-based recommender system is enhanced using the ontological information about tourism domain to represent both the user profile and the recommendable POIs. The proposed ontology-based recommendation process is performed in three steps including: ontology-based content analyzer, ontology-based profile learner, and ontology-based filtering component. User’s feedback adapts the user’s preferences using Spreading Activation (SA strategy. It shows the proposed recommender system is effective and improves the overall performance of the traditional content-based recommender systems.

  1. Modeling soil evaporation efficiency in a range of soil and atmospheric conditions using a meta-analysis approach

    Science.gov (United States)

    Merlin, O.; Stefan, V. G.; Amazirh, A.; Chanzy, A.; Ceschia, E.; Er-Raki, S.; Gentine, P.; Tallec, T.; Ezzahar, J.; Bircher, S.; Beringer, J.; Khabba, S.

    2016-05-01

    A meta-analysis data-driven approach is developed to represent the soil evaporative efficiency (SEE) defined as the ratio of actual to potential soil evaporation. The new model is tested across a bare soil database composed of more than 30 sites around the world, a clay fraction range of 0.02-0.56, a sand fraction range of 0.05-0.92, and about 30,000 acquisition times. SEE is modeled using a soil resistance (rss) formulation based on surface soil moisture (θ) and two resistance parameters rss,ref and θefolding. The data-driven approach aims to express both parameters as a function of observable data including meteorological forcing, cut-off soil moisture value θ1/2 at which SEE=0.5, and first derivative of SEE at θ1/2, named Δθ1/2-1. An analytical relationship between >(rss,ref;θefolding) and >(θ1/2;Δθ1/2-1>) is first built by running a soil energy balance model for two extreme conditions with rss = 0 and rss˜∞ using meteorological forcing solely, and by approaching the middle point from the two (wet and dry) reference points. Two different methods are then investigated to estimate the pair >(θ1/2;Δθ1/2-1>) either from the time series of SEE and θ observations for a given site, or using the soil texture information for all sites. The first method is based on an algorithm specifically designed to accomodate for strongly nonlinear SEE>(θ>) relationships and potentially large random deviations of observed SEE from the mean observed SEE>(θ>). The second method parameterizes θ1/2 as a multi-linear regression of clay and sand percentages, and sets Δθ1/2-1 to a constant mean value for all sites. The new model significantly outperformed the evaporation modules of ISBA (Interaction Sol-Biosphère-Atmosphère), H-TESSEL (Hydrology-Tiled ECMWF Scheme for Surface Exchange over Land), and CLM (Community Land Model). It has potential for integration in various land-surface schemes, and real calibration capabilities using combined thermal and microwave

  2. Expert system for web based collaborative CAE

    Science.gov (United States)

    Hou, Liang; Lin, Zusheng

    2006-11-01

    An expert system for web based collaborative CAE was developed based on knowledge engineering, relational database and commercial FEA (Finite element analysis) software. The architecture of the system was illustrated. In this system, the experts' experiences, theories and typical examples and other related knowledge, which will be used in the stage of pre-process in FEA, were categorized into analysis process and object knowledge. Then, the integrated knowledge model based on object-oriented method and rule based method was described. The integrated reasoning process based on CBR (case based reasoning) and rule based reasoning was presented. Finally, the analysis process of this expert system in web based CAE application was illustrated, and an analysis example of a machine tool's column was illustrated to prove the validity of the system.

  3. Space nuclear power systems for extraterrestrial basing

    International Nuclear Information System (INIS)

    Lance, J.R.; Chi, J.W.H.

    1989-01-01

    Previous studies of nuclear and non-nuclear power systems for lunar bases are compared with recent studies by others. Power levels from tens of kW e for early base operation up to 2000 kW e for a self-sustaining base with a Closed Environment Life Support System (CELSS) are considered. Permanent lunar or Martian bases will require the use of multiple nuclear units connected to loads with a power transmission and distribution system analogous to earth-based electric utility systems. A methodology used for such systems is applied to the lunar base system to examine the effects of adding 100 kW e SP-100 class and/or larger nuclear units when a reliability criterion is imposed. The results show that resource and logistic burdens can be reduced by using 1000 kW e units early in the base growth scenario without compromising system reliability. Therefore, both technologies being developed in two current programs (SP-100 and NERVA Derivative Reactor (NDR) technology for space power) can be used effectively for extraterrestrial base power systems. Recent developments in NDR design that result in major reductions in reactor mass are also described. (author)

  4. For Developers

    Science.gov (United States)

    ... health IT providers to link patient portals and electronic health record (EHR) systems to content from MedlinePlus.gov. MedlinePlus ... updates Subscribe to RSS Follow us Disclaimers Copyright Privacy Accessibility Quality Guidelines Viewers & Players MedlinePlus Connect for ...

  5. MedlinePlus FAQ: What's the difference between MedlinePlus and MedlinePlus Connect?

    Science.gov (United States)

    ... MedlinePlus Connect is a free service that allows electronic health record (EHR) systems to easily link users to MedlinePlus, ... updates Subscribe to RSS Follow us Disclaimers Copyright Privacy Accessibility Quality Guidelines Viewers & Players MedlinePlus Connect for ...

  6. Linking to MedlinePlus

    Science.gov (United States)

    ... want to link patients or healthcare providers from electronic health record (EHR) systems to relevant MedlinePlus information, use MedlinePlus ... updates Subscribe to RSS Follow us Disclaimers Copyright Privacy Accessibility Quality Guidelines Viewers & Players MedlinePlus Connect for ...

  7. KNOWLEDGE AND XML BASED CAPP SYSTEM

    Institute of Scientific and Technical Information of China (English)

    ZHANG Shijie; SONG Laigang

    2006-01-01

    In order to enhance the intelligent level of system and improve the interactivity with other systems, a knowledge and XML based computer aided process planning (CAPP) system is implemented. It includes user management, bill of materials(BOM) management, knowledge based process planning, knowledge management and database maintaining sub-systems. This kind of nesting knowledge representation method the system provided can represent complicated arithmetic and logical relationship to deal with process planning tasks. With the representation and manipulation of XML based technological file, the system solves some important problems in web environment such as information interactive efficiency and refreshing of web page. The CAPP system is written in ASP VBScript, JavaScript, Visual C++ languages and Oracle database. At present, the CAPP system is running in Shenyang Machine Tools. The functions of it meet the requirements of enterprise production.

  8. Enhacements to the TTS-502 time transfer system

    Science.gov (United States)

    Vandierendonck, A. J.; Hua, Q. D.

    1985-04-01

    Two years ago STI introduced an affordable, relatively compact time transfer system on the market -- the TTS-502, and described that system at the 1981 PTTI conference. Over the past few months, that system has been improved, and new features have been added. In addition, new options have been made available to further enhance the capabilities of the system. These enhancements include the addition of a positioning algorithm and new options providing a corrected 5 MHz output that is phase coherent with the 1 pps output, and providing an internal Rubidium Oscillator. The Positioning Algorithm was developed because not all time transfer users had the luxury of the Defense Mapping Agency's (DMA) services for determining their position in WGS-72 coordinates. The enhanced TTS-502 determines the GPS position anywhere in the world, independent of how many GPS satellites are concurrently visible. However, convergence time to a solution is inversely proportional to the number of satellites concurrently visible and the quality of frequency standard used in conjunction with the TTS-502. Real World solution results will be presented for a variety of cases and satellite scheduling scenarios. Typically, positioning accuracies were achieved better than 5 to 10 meters r.s.s. using the C/A code only at Sunnyvale, California.

  9. CHIPS. Volume 29, Issue 1, January - March 2011

    Science.gov (United States)

    2011-03-01

    SPAWARSYSCEN Atlantic ___________________________________________ Columnists Sharon Anderson, Terry Halvorsen, Mike Hernon, Tom Kidd, Steve Muck...that users need. might be changes to the IP officer page. Additionally, pages should have Really Simple Syndication (RSS) feeds. An RSS feed

  10. Introduction to data base management systems

    International Nuclear Information System (INIS)

    Rossiter, B.N.

    1984-01-01

    Data base management systems offer considerable advantages over elementary filing systems under favourable circumstances such as where data structures and applications are continually changing. The architecture of such systems and the manner in which they work is described, with particular attention to data independence. An introduction is made to the classification of data base management systems by the data structuring models that they employ. (orig.)

  11. Reliability-Based Optimization of Series Systems of Parallel Systems

    DEFF Research Database (Denmark)

    Enevoldsen, I.; Sørensen, John Dalsgaard

    Reliability-based design of structural systems is considered. Especially systems where the reliability model is a series system of parallel systems are analysed. A sensitivity analysis for this class of problems is presented. Direct and sequential optimization procedures to solve the optimization...

  12. Solar based hydrogen production systems

    CERN Document Server

    Dincer, Ibrahim

    2013-01-01

    This book provides a comprehensive analysis of various solar based hydrogen production systems. The book covers first-law (energy based) and second-law (exergy based) efficiencies and provides a comprehensive understanding of their implications. It will help minimize the widespread misuse of efficiencies among students and researchers in energy field by using an intuitive and unified approach for defining efficiencies. The book gives a clear understanding of the sustainability and environmental impact analysis of the above systems. The book will be particularly useful for a clear understanding

  13. Interference-Based Decode and Forward Scheme Using Relay Nodes in Heterogeneous Networks

    Directory of Open Access Journals (Sweden)

    Kentaro Nishimori

    2012-01-01

    Full Text Available This paper proposes interference-based decode and forward scheme that utilizes relay stations (RSs. In Long-Term-Evolution (LTE- Advanced, heterogeneous networks in which femto- and picocells are overlaid onto macrocells are extensively discussed. However, interference between macro- and pico(femtocells arises due to their different transmit power levels. Unlike conventional cooperative transmission schemes, the RS decodes interference in the first transmit timing period and forwards it to the user equipment (UE in the second period. Moreover, cooperative transmission can be achieved without stopping the transmission from the base station (BS to UE when forwarding the interference from the RS to the UE by utilizing the fact that signal-to-noise power ratio (SNR between the RS and UE is much greater than that between the BS and UE. The basic performance of the proposed method is shown based on computer simulation. Moreover, the interference temperature and shadowing effect are measured when considering the coexistence between macro- and femtocells, and the performance of the proposed method is verified using measured shadowing effect.

  14. Carbon Monoxide Information Center

    Medline Plus

    Full Text Available ... RSS E-mail Inside CPSC Accessibility Privacy Policy Budget, Performances & Finance Open Government Freedom of Information (FOIA) ... Information Sitemap RSS E-mail Accessibility Privacy Policy Budget & Performance Open Government Freedom of Information (FOIA) USA. ...

  15. Carbon Monoxide Information Center

    Medline Plus

    Full Text Available ... International Newsroom About CPSC Contact Us Sitemap RSS E-mail Inside CPSC Accessibility Privacy Policy Budget, Performances & ... Subscribe to CPSC News and Information Sitemap RSS E-mail Accessibility Privacy Policy Budget & Performance Open Government ...

  16. Carbon Monoxide Information Center

    Medline Plus

    Full Text Available ... Us Sitemap RSS E-mail Inside CPSC Accessibility Privacy Policy Budget, Performances & Finance Open Government Freedom of ... News and Information Sitemap RSS E-mail Accessibility Privacy Policy Budget & Performance Open Government Freedom of Information ( ...

  17. Improved biosensor-based detection system

    DEFF Research Database (Denmark)

    2015-01-01

    Described is a new biosensor-based detection system for effector compounds, useful for in vivo applications in e.g. screening and selecting of cells which produce a small molecule effector compound or which take up a small molecule effector compound from its environment. The detection system...... comprises a protein or RNA-based biosensor for the effector compound which indirectly regulates the expression of a reporter gene via two hybrid proteins, providing for fewer false signals or less 'noise', tuning of sensitivity or other advantages over conventional systems where the biosensor directly...

  18. Microprocessor based systems for the higher technician

    CERN Document Server

    Vears, RE

    2013-01-01

    Microprocessor Based Systems for the Higher Technician provides coverage of the BTEC level 4 unit in Microprocessor Based Systems (syllabus U80/674). This book is composed of 10 chapters and concentrates on the development of 8-bit microcontrollers specifically constructed around the Z80 microprocessor. The design cycle for the development of such a microprocessor based system and the use of a disk-based development system (MDS) as an aid to design are both described in detail. The book deals with the Control Program Monitor (CP/M) operating system and gives background information on file hand

  19. Application of probability distributions for quantifying uncertainty in radionuclide source terms for Seabrook risk assessment

    International Nuclear Information System (INIS)

    Walker, D.H.; Savin, N.L.

    1985-01-01

    The calculational models developed for the Reactor Safety Study (RSS) have traditionally been used to generate 'point estimate values' for radionuclide release to the environment for nuclear power plant risk assessments. The point estimate values so calculated are acknowledged by most knowledgeable individuals to be conservatively high. Further, recent evaluations of the overall uncertainties in the various components that make up risk estimates for nuclear electric generating stations show that one of the large uncertainties is associated with the magnitude of the radionuclide release to the environment. In the approach developed for the RSS, values for fission product release from the fuel are derived from data obtained from small experiments. A reappraisal of the RSS release fractions was published in 1981 in NUREG-0772. Estimates of fractional releases from fuel are similar to those of the RSS. In the RSS approach, depletion during transport from the core (where the fission products are released) to the containment is assumed to be zero for calculation purposes. In the containment, the CORRAL code is applied to calculate radioactivity depletion by containment processes and to calculate the quantity and timing of release to the environment

  20. Avaliação do gerenciamento dos resíduos de serviços de saúde em municípios da região metropolitana de Belo Horizonte (Brasil

    Directory of Open Access Journals (Sweden)

    Denise Felício Silva

    2014-09-01

    Full Text Available O gerenciamento impróprio dos resíduos de serviços de saúde (RSS expõe significantes riscos a pacientes, aos trabalhadores da saúde, à comunidade e ao meio ambiente. Um dos fatores que têm contribuído para aumentar a tendência da adoção do modelo diferenciado de gerenciamento de RSS em diversos países é que eles muitas vezes têm como destino final o mesmo local utilizado para descarte dos demais resíduos urbanos. Com o objetivo de avaliar os procedimentos do gerenciamento dos RSS em relação ao prescrito nas normas e nos regulamentos em municípios da região metropolitana de Belo Horizonte, Minas Gerais, foram realizadas visitas a campo para observar e descrever formas de gerenciamento dos RSS (desde a coleta até a destinação final utilizadas, visando ao conhecimento da realidade. Como resultado, evidenciaram-se falhas nos abrigos externos, nos procedimentos de coleta, no uso de equipamentos de proteção individual, no acondicionamento dos RSS e no seu transporte.

  1. Statistical reliability assessment of software-based systems

    International Nuclear Information System (INIS)

    Korhonen, J.; Pulkkinen, U.; Haapanen, P.

    1997-01-01

    Plant vendors nowadays propose software-based systems even for the most critical safety functions. The reliability estimation of safety critical software-based systems is difficult since the conventional modeling techniques do not necessarily apply to the analysis of these systems, and the quantification seems to be impossible. Due to lack of operational experience and due to the nature of software faults, the conventional reliability estimation methods can not be applied. New methods are therefore needed for the safety assessment of software-based systems. In the research project Programmable automation systems in nuclear power plants (OHA), financed together by the Finnish Centre for Radiation and Nuclear Safety (STUK), the Ministry of Trade and Industry and the Technical Research Centre of Finland (VTT), various safety assessment methods and tools for software based systems are developed and evaluated. This volume in the OHA-report series deals with the statistical reliability assessment of software based systems on the basis of dynamic test results and qualitative evidence from the system design process. Other reports to be published later on in OHA-report series will handle the diversity requirements in safety critical software-based systems, generation of test data from operational profiles and handling of programmable automation in plant PSA-studies. (orig.) (25 refs.)

  2. Qualification of FPGA-Based Safety-Related PRM System

    International Nuclear Information System (INIS)

    Miyazaki, Tadashi; Oda, Naotaka; Goto, Yasushi; Hayashi, Toshifumi

    2011-01-01

    Toshiba has developed Non-rewritable (NRW) Field Programmable Gate Array (FPGA)-based safety-related Instrumentation and Control (I and C) system. Considering application to safety-related systems, nonvolatile and non-rewritable FPGA which is impossible to be changed after once manufactured has been adopted in Toshiba FPGA-based system. FPGA is a device which consists only of basic logic circuits, and FPGA performs defined processing which is configured by connecting the basic logic circuit inside the FPGA. FPGA-based system solves issues existing both in the conventional systems operated by analog circuits (analog-based system) and the systems operated by central processing unit (CPU-based system). The advantages of applying FPGA are to keep the long-life supply of products, improving testability (verification), and to reduce the drift which may occur in analog-based system. The system which Toshiba developed this time is Power Range Neutron Monitor (PRM). Toshiba is planning to expand application of FPGA-based technology by adopting this development process to the other safety-related systems such as RPS from now on. Toshiba developed a special design process for NRW-FPGA-based safety-related I and C systems. The design process resolves issues for many years regarding testability of the digital system for nuclear safety application. Thus, Toshiba NRW-FPGA-based safety-related I and C systems has much advantage to be a would standard of the digital systems for nuclear safety application. (author)

  3. Emergence and Evolution

    DEFF Research Database (Denmark)

    Bullwinkle, Tammy J; Ibba, Michael

    2013-01-01

    ancestor and as such they provide insights into the evolution and development of the extant genetic code. Although the aaRSs have long been viewed as a highly conserved group of enzymes, findings within the last couple of decades have started to demonstrate how diverse and versatile these enzymes really...... are. Beyond their central role in translation, aaRSs and their numerous homologs have evolved a wide array of alternative functions both inside and outside translation. Current understanding of the emergence of the aaRSs, and their subsequent evolution into a functionally diverse enzyme family...

  4. Crowd-Sourced Mobility Mapping for Location Tracking Using Unlabeled Wi-Fi Simultaneous Localization and Mapping

    Directory of Open Access Journals (Sweden)

    Mu Zhou

    2015-01-01

    Full Text Available Due to the increasing requirements of the seamless and round-the-clock Location-based services (LBSs, a growing interest in Wi-Fi network aided location tracking is witnessed in the past decade. One of the significant problems of the conventional Wi-Fi location tracking approaches based on received signal strength (RSS fingerprinting is the time-consuming and labor intensive work involved in location fingerprint calibration. To solve this problem, a novel unlabeled Wi-Fi simultaneous localization and mapping (SLAM approach is developed to avoid the location fingerprinting and additional inertial or vision sensors. In this approach, an unlabeled mobility map of the coverage area is first constructed by using the crowd-sourcing from a batch of sporadically recorded Wi-Fi RSS sequences based on the spectral cluster assembling. Then, the sequence alignment algorithm is applied to conduct location tracking and mobility map updating. Finally, the effectiveness of this approach is verified by the extensive experiments carried out in a campus-wide area.

  5. Short Message System (SMS) revisited

    DEFF Research Database (Denmark)

    Simonsen, Eivind Ortind; Dahl, Mads Ronald

    In a rapidly changing world of technology, communication and information is everywhere around us. Technology is constantly moving the frontier for what is possible and having an increasing impact on education. New inventions create new ways of effective mass communication and the expectations from...... to meet this challenge is to make use of new technological achievements in some novel way (CMS, LMS, VLE, RSS etc.). Another way is to take one step backwards, and employ an older technology that is stable and which people are familiar with. At the Faculty of Health, Aarhus University, Denmark, the latter...

  6. Analysis of Tomato spotted wilt virus NSs protein indicates the importance of the N-terminal for avirulence and RNA silencing suppression

    NARCIS (Netherlands)

    Ronde, de D.; Pasquier, A.; Ying, S.; Butterbach, P.B.E.; Lohuis, D.; Kormelink, R.J.M.

    2014-01-01

    Recently, Tomato spotted wilt virus (TSWV) nonstructural protein NSs has been identified unambiguously as an avirulence (Avr) determinant for Tomato spotted wilt (Tsw)-based resistance. The observation that NSs from two natural resistance-breaking isolates had lost RNA silencing suppressor (RSS)

  7. Dynamics and sources of reduced sulfur, humic substances and dissolved organic carbon in a temperate river system affected by agricultural practices.

    Science.gov (United States)

    Marie, Lauriane; Pernet-Coudrier, Benoît; Waeles, Matthieu; Gabon, Marine; Riso, Ricardo

    2015-12-15

    Although reduced organic sulfur substances (RSS) as well as humic substances (HS) are widely suspected to play a role in, for example, metal speciation or used as a model of dissolved organic carbon (DOC) in laboratory studies, reports of their quantification in natural waters are scarce. We have examined the dynamics and sources of reduced sulfur, HS and DOC over an annual cycle in a river system affected by agricultural practices. The new differential pulse cathodic stripping voltammetry was successfully applied to measure glutathione-like compounds (GSHs), thioacetamide-like compounds (TAs) and the liquid chromatography coupled to organic detector to analyze HS and DOC at high frequency in the Penzé River (NW France). The streamflow-concentration patterns, principal components analysis and flux analysis allowed discrimination of the source of each organic compound type. Surprisingly, the two RSS and HS detected in all samples, displayed different behavior. As previously shown, manuring practice is the main source of DOC and HS in this watershed where agricultural activity is predominant. The HS were then transferred to the river systems via runoff, particularly during the spring and autumn floods, which are responsible of >60% of the annual flux. TAs had a clear groundwater source and may be formed underground, whereas GSHs displayed two sources: one aquagenic in spring and summer probably linked to the primary productivity and a second, which may be related to bacterial degradation. High sampling frequency allowed a more accurate assessment of the flux values which were 280 tC y(-1) for DOC representing 20 kg C ha(-1) y(-1). HS, TAs and GSHs fluxes represented 60, 13, and 4% of the total annual DOC export, respectively. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Hardening cookies in web-based systems for better system integrity

    International Nuclear Information System (INIS)

    Mohamad Safuan Sulaiman; Mohd Dzul Aiman Aslan; Saaidi Ismail; Abdul Aziz Mohd Ramli; Abdul Muin Abdul Rahman; Siti Nurbahyah Hamdan; Norlelawati Hashimuddin; Sufian Norazam Mohamed Aris

    2012-01-01

    IT Center (ITC) as technical support and provider for most of web-based systems in Nuclear Malaysia has conducted a study to investigate cookie vulnerability in a system for better integrity. A part of the result has found that cookies in a web-based system in Nuclear Malaysia can be easily manipulated. The main objective of the study is to harden the vulnerability of the cookies. Two levels of security procedures have been used and enforced which consist of 1) Penetration test (Pen Test) 2) Hardening procedure. In one of the system, study has found that 121 attempts threats have been detected after the hardening enforcement from 23 March till 20 September 2012. At this stage, it can be concluded that cookie vulnerability in the system has been hardened and integrity has been assured after the enforcement. This paper describes in detail the penetration and hardening process of cookie vulnerability for better supporting web-based system in Nuclear Malaysia. (author)

  9. A knowledge-based system for prototypical reasoning

    Science.gov (United States)

    Lieto, Antonio; Minieri, Andrea; Piana, Alberto; Radicioni, Daniele P.

    2015-04-01

    In this work we present a knowledge-based system equipped with a hybrid, cognitively inspired architecture for the representation of conceptual information. The proposed system aims at extending the classical representational and reasoning capabilities of the ontology-based frameworks towards the realm of the prototype theory. It is based on a hybrid knowledge base, composed of a classical symbolic component (grounded on a formal ontology) with a typicality based one (grounded on the conceptual spaces framework). The resulting system attempts to reconcile the heterogeneous approach to the concepts in Cognitive Science with the dual process theories of reasoning and rationality. The system has been experimentally assessed in a conceptual categorisation task where common sense linguistic descriptions were given in input, and the corresponding target concepts had to be identified. The results show that the proposed solution substantially extends the representational and reasoning 'conceptual' capabilities of standard ontology-based systems.

  10. Prototype of smart office system using based security system

    Science.gov (United States)

    Prasetyo, T. F.; Zaliluddin, D.; Iqbal, M.

    2018-05-01

    Creating a new technology in the modern era gives a positive impact on business and industry. Internet of Things (IoT) as a new communication technology is very useful in realizing smart systems such as: smart home, smart office, smart parking and smart city. This study presents a prototype of the smart office system which was designed as a security system based on IoT. Smart office system development method used waterfall model. IoT-based smart office system used platform (project builder) cayenne so that. The data can be accessed and controlled through internet network from long distance. Smart office system used arduino mega 2560 microcontroller as a controller component. In this study, Smart office system is able to detect threats of dangerous objects made from metals, earthquakes, fires, intruders or theft and perform security monitoring outside the building by using raspberry pi cameras on autonomous robots in real time to the security guard.

  11. Automation of Aditya vacuum control system based on CODAC Core System

    Energy Technology Data Exchange (ETDEWEB)

    Raulji, Vismaysinh D., E-mail: vismay@ipr.res.in; Pujara, Harshad; Arambhadiya, Bharat; Jadeja, Kumarpalsinh; Bhatt, Shailesh; Rajpal, Rachana

    2016-11-15

    Highlights: • Monitor and control of vacuum control system based on CODAC Core System. • Communication between SIEMENS PLC and open source software EPICS. • With CODAC Core easy to configure and programming of slow controller. - Abstract: The main objective of vacuum control system is to provide ultrahigh vacuum for Aditya Tokamak operations. Aditya Vacuum vessel is having four vacuum pumping lines. To demonstrate implementation of automation; a study case is under taken by automating single Pumping Line of the Aditya vacuum system using CODAC Core System (CCS). Currently, vacuum system is operated manually. The CCS based control system allows remote control, monitoring, alarm handling of vacuum parameters. The CODAC Core System is the Linux based software package that is distributed by ITER Organization for the development of Plant System I&C software. CODAC Core System includes EPICS, CSS (Control System Studio) etc. CSS is used for HMI (Human Machine Interface), alarms and archives. SDD (Self Description Data) tool is used to configure plant system I&C. SDD Editor is an Eclipse based application to define the plant system, interface, I&C component, interfaced signals, configure variable. SCADA (Supervisory Control and Data Acquisition) system is developed in CSS. Data is transferred between PLC and CSS through EPICS. The complete system is tested with Aditya Vacuum Control System with process interlocks. Operator interface is also developed using Lab VIEW as a choice of the user. This paper will describe the salient features of the developed control system in detail.

  12. Ringed Seal Search for Global Optimization via a Sensitive Search Model.

    Directory of Open Access Journals (Sweden)

    Younes Saadi

    Full Text Available The efficiency of a metaheuristic algorithm for global optimization is based on its ability to search and find the global optimum. However, a good search often requires to be balanced between exploration and exploitation of the search space. In this paper, a new metaheuristic algorithm called Ringed Seal Search (RSS is introduced. It is inspired by the natural behavior of the seal pup. This algorithm mimics the seal pup movement behavior and its ability to search and choose the best lair to escape predators. The scenario starts once the seal mother gives birth to a new pup in a birthing lair that is constructed for this purpose. The seal pup strategy consists of searching and selecting the best lair by performing a random walk to find a new lair. Affected by the sensitive nature of seals against external noise emitted by predators, the random walk of the seal pup takes two different search states, normal state and urgent state. In the normal state, the pup performs an intensive search between closely adjacent lairs; this movement is modeled via a Brownian walk. In an urgent state, the pup leaves the proximity area and performs an extensive search to find a new lair from sparse targets; this movement is modeled via a Levy walk. The switch between these two states is realized by the random noise emitted by predators. The algorithm keeps switching between normal and urgent states until the global optimum is reached. Tests and validations were performed using fifteen benchmark test functions to compare the performance of RSS with other baseline algorithms. The results show that RSS is more efficient than Genetic Algorithm, Particles Swarm Optimization and Cuckoo Search in terms of convergence rate to the global optimum. The RSS shows an improvement in terms of balance between exploration (extensive and exploitation (intensive of the search space. The RSS can efficiently mimic seal pups behavior to find best lair and provide a new algorithm to be

  13. High-Quality T2-Weighted 4-Dimensional Magnetic Resonance Imaging for Radiation Therapy Applications

    Energy Technology Data Exchange (ETDEWEB)

    Du, Dongsu [Department of Radiation Oncology, Washington University School of Medicine, Saint Louis, Missouri (United States); Caruthers, Shelton D. [Philips Healthcare, Cleveland, Ohio (United States); Glide-Hurst, Carri [Department of Radiation Oncology, Henry Ford Health System, Detroit, Michigan (United States); Low, Daniel A. [Department of Radiation Oncology, University of California-Los Angeles, Los Angeles, California (United States); Li, H. Harold; Mutic, Sasa [Department of Radiation Oncology, Washington University School of Medicine, Saint Louis, Missouri (United States); Hu, Yanle, E-mail: Hu.Yanle@mayo.edu [Department of Radiation Oncology, Washington University School of Medicine, Saint Louis, Missouri (United States); Department of Radiation Oncology, Mayo Clinic in Arizona, Phoenix, Arizona (United States)

    2015-06-01

    Purpose: The purpose of this study was to improve triggering efficiency of the prospective respiratory amplitude-triggered 4-dimensional magnetic resonance imaging (4DMRI) method and to develop a 4DMRI imaging protocol that could offer T2 weighting for better tumor visualization, good spatial coverage and spatial resolution, and respiratory motion sampling within a reasonable amount of time for radiation therapy applications. Methods and Materials: The respiratory state splitting (RSS) and multi-shot acquisition (MSA) methods were analytically compared and validated in a simulation study by using the respiratory signals from 10 healthy human subjects. The RSS method was more effective in improving triggering efficiency. It was implemented in prospective respiratory amplitude-triggered 4DMRI. 4DMRI image datasets were acquired from 5 healthy human subjects. Liver motion was estimated using the acquired 4DMRI image datasets. Results: The simulation study showed the RSS method was more effective for improving triggering efficiency than the MSA method. The average reductions in 4DMRI acquisition times were 36% and 10% for the RSS and MSA methods, respectively. The human subject study showed that T2-weighted 4DMRI with 10 respiratory states, 60 slices at a spatial resolution of 1.5 × 1.5 × 3.0 mm{sup 3} could be acquired in 9 to 18 minutes, depending on the individual's breath pattern. Based on the acquired 4DMRI image datasets, the ranges of peak-to-peak liver displacements among 5 human subjects were 9.0 to 12.9 mm, 2.5 to 3.9 mm, and 0.5 to 2.3 mm in superior-inferior, anterior-posterior, and left-right directions, respectively. Conclusions: We demonstrated that with the RSS method, it was feasible to acquire high-quality T2-weighted 4DMRI within a reasonable amount of time for radiation therapy applications.

  14. Development of Spreadsheet-Based Integrated Transaction Processing Systems and Financial Reporting Systems

    Science.gov (United States)

    Ariana, I. M.; Bagiada, I. M.

    2018-01-01

    Development of spreadsheet-based integrated transaction processing systems and financial reporting systems is intended to optimize the capabilities of spreadsheet in accounting data processing. The purpose of this study are: 1) to describe the spreadsheet-based integrated transaction processing systems and financial reporting systems; 2) to test its technical and operational feasibility. This study type is research and development. The main steps of study are: 1) needs analysis (need assessment); 2) developing spreadsheet-based integrated transaction processing systems and financial reporting systems; and 3) testing the feasibility of spreadsheet-based integrated transaction processing systems and financial reporting systems. The technical feasibility include the ability of hardware and operating systems to respond the application of accounting, simplicity and ease of use. Operational feasibility include the ability of users using accounting applications, the ability of accounting applications to produce information, and control applications of the accounting applications. The instrument used to assess the technical and operational feasibility of the systems is the expert perception questionnaire. The instrument uses 4 Likert scale, from 1 (strongly disagree) to 4 (strongly agree). Data were analyzed using percentage analysis by comparing the number of answers within one (1) item by the number of ideal answer within one (1) item. Spreadsheet-based integrated transaction processing systems and financial reporting systems integrate sales, purchases, and cash transaction processing systems to produce financial reports (statement of profit or loss and other comprehensive income, statement of changes in equity, statement of financial position, and statement of cash flows) and other reports. Spreadsheet-based integrated transaction processing systems and financial reporting systems is feasible from the technical aspects (87.50%) and operational aspects (84.17%).

  15. Refractory septic shock in children: a European Society of Paediatric and Neonatal Intensive Care definition

    NARCIS (Netherlands)

    Morin, Luc; Ray, Samiran; Wilson, Clare; Remy, Solenn; Benissa, Mohamed Rida; Jansen, Nicolaas J. G.; Javouhey, Etienne; Peters, Mark J.; Kneyber, Martin; De Luca, Daniele; Nadel, Simon; Schlapbach, Luregn Jan; Maclaren, Graeme; Tissieres, Pierre

    2016-01-01

    Purpose Although overall paediatric septic shock mortality is decreasing, refractory septic shock (RSS) is still associated with high mortality. A definition for RSS is urgently needed to facilitate earlier identification and treatment. We aim to establish a European society of paediatric and

  16. Refractory septic shock in children : a European Society of Paediatric and Neonatal Intensive Care definition

    NARCIS (Netherlands)

    Morin, Luc; Ray, Samiran; Wilson, Clare; Remy, Solenn; Benissa, Mohamed Rida; Jansen, Nicolaas J. G.; Javouhey, Etienne; Peters, Mark J.; Kneyber, Martin; De Luca, Daniele; Nadel, Simon; Schlapbach, Luregn Jan; Maclaren, Graeme; Tissieres, Pierre

    2016-01-01

    Although overall paediatric septic shock mortality is decreasing, refractory septic shock (RSS) is still associated with high mortality. A definition for RSS is urgently needed to facilitate earlier identification and treatment. We aim to establish a European society of paediatric and neonatal

  17. Assurance in Agent-Based Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gilliom, Laura R.; Goldsmith, Steven Y.

    1999-05-10

    Our vision of the future of information systems is one that includes engineered collectives of software agents which are situated in an environment over years and which increasingly improve the performance of the overall system of which they are a part. At a minimum, the movement of agent and multi-agent technology into National Security applications, including their use in information assurance, is apparent today. The use of deliberative, autonomous agents in high-consequence/high-security applications will require a commensurate level of protection and confidence in the predictability of system-level behavior. At Sandia National Laboratories, we have defined and are addressing a research agenda that integrates the surety (safety, security, and reliability) into agent-based systems at a deep level. Surety is addressed at multiple levels: The integrity of individual agents must be protected by addressing potential failure modes and vulnerabilities to malevolent threats. Providing for the surety of the collective requires attention to communications surety issues and mechanisms for identifying and working with trusted collaborators. At the highest level, using agent-based collectives within a large-scale distributed system requires the development of principled design methods to deliver the desired emergent performance or surety characteristics. This position paper will outline the research directions underway at Sandia, will discuss relevant work being performed elsewhere, and will report progress to date toward assurance in agent-based systems.

  18. Assurance in Agent-Based Systems

    International Nuclear Information System (INIS)

    Gilliom, Laura R.; Goldsmith, Steven Y.

    1999-01-01

    Our vision of the future of information systems is one that includes engineered collectives of software agents which are situated in an environment over years and which increasingly improve the performance of the overall system of which they are a part. At a minimum, the movement of agent and multi-agent technology into National Security applications, including their use in information assurance, is apparent today. The use of deliberative, autonomous agents in high-consequence/high-security applications will require a commensurate level of protection and confidence in the predictability of system-level behavior. At Sandia National Laboratories, we have defined and are addressing a research agenda that integrates the surety (safety, security, and reliability) into agent-based systems at a deep level. Surety is addressed at multiple levels: The integrity of individual agents must be protected by addressing potential failure modes and vulnerabilities to malevolent threats. Providing for the surety of the collective requires attention to communications surety issues and mechanisms for identifying and working with trusted collaborators. At the highest level, using agent-based collectives within a large-scale distributed system requires the development of principled design methods to deliver the desired emergent performance or surety characteristics. This position paper will outline the research directions underway at Sandia, will discuss relevant work being performed elsewhere, and will report progress to date toward assurance in agent-based systems

  19. Русский стих : метрика системы стихосложения, просодия (генеративный подход) / Михаил Лотман

    Index Scriptorium Estoniae

    Лотман, Михаил, 1952-

    2000-01-01

    Russian verse: its metrics, versification systems, and prosody (generative synopsis). Lk. 217-218 ; Vene värss: meetrika, värsisüsteemid ja prosoodika (generatiivne ülevaade). Lk. 241. Üldisest värsimõõduteooriast ja selle rakendamisest vene värsile

  20. Current trends on knowledge-based systems

    CERN Document Server

    Valencia-García, Rafael

    2017-01-01

    This book presents innovative and high-quality research on the implementation of conceptual frameworks, strategies, techniques, methodologies, informatics platforms and models for developing advanced knowledge-based systems and their application in different fields, including Agriculture, Education, Automotive, Electrical Industry, Business Services, Food Manufacturing, Energy Services, Medicine and others. Knowledge-based technologies employ artificial intelligence methods to heuristically address problems that cannot be solved by means of formal techniques. These technologies draw on standard and novel approaches from various disciplines within Computer Science, including Knowledge Engineering, Natural Language Processing, Decision Support Systems, Artificial Intelligence, Databases, Software Engineering, etc. As a combination of different fields of Artificial Intelligence, the area of Knowledge-Based Systems applies knowledge representation, case-based reasoning, neural networks, Semantic Web and TICs used...

  1. MTA Computer Based Evaluation System.

    Science.gov (United States)

    Brenner, Lisa P.; And Others

    The MTA PLATO-based evaluation system, which has been implemented by a consortium of schools of medical technology, is designed to be general-purpose, modular, data-driven, and interactive, and to accommodate other national and local item banks. The system provides a comprehensive interactive item-banking system in conjunction with online student…

  2. Groebner Bases Based Verification Solution for SystemVerilog Concurrent Assertions

    Directory of Open Access Journals (Sweden)

    Ning Zhou

    2014-01-01

    of polynomial ring algebra to perform SystemVerilog assertion verification over digital circuit systems. This method is based on Groebner bases theory and sequential properties checking. We define a constrained subset of SVAs so that an efficient polynomial modeling mechanism for both circuit descriptions and assertions can be applied. We present an algorithm framework based on the algebraic representations using Groebner bases for concurrent SVAs checking. Case studies show that computer algebra can provide canonical symbolic representations for both assertions and circuit designs and can act as a novel solver engine from the viewpoint of symbolic computation.

  3. Activities of Radiation Standard Section

    International Nuclear Information System (INIS)

    Kannan, A.; Rao, P.S.; Sachadev, R.N.; Shaha, V.V.; Sharma, D.; Srivastava, P.K.

    1992-01-01

    A brief account of the various facilities and services provided by the Radiation Standards Section (RSS) of the Bhabha Atomic Research Centre, Bombay is given. RSS maintains the primary and secondary standards of various parameters of radiation measurements. It ensures accurate radiological measurements as per international requirements, through periodic international intercomparisons of national standards. It also provides calibration services to various users of radiation sources and instruments. The activities of RSS are described under the headings: (1) Radiological Metrology Standards, (2) Radionuclide Standards, Neutron Metrology, (4) Instruments Calibration, (5) Non-ionizing Radiations, and (6) Instrumentation. (author). figs., tabs

  4. Expert system based radionuclide identification

    International Nuclear Information System (INIS)

    Aarnio, P.A.; Ala-Heikkil, J.J.; Hakulinen, T.T.; Nikkinen, M.T.

    1998-01-01

    An expert system coupled with the gamma spectrum analysis system SAMPO has been developed for automating the qualitative identification of radionuclides as well as for determining the quantitative parameters of the spectrum components. The program is written in C-language and runs in various environments ranging from PCs to UNIX workstations. The expert system utilizes a complete gamma library with over 2600 nuclides and 80,000 lines, and a rule base of about fifty criteria including energies, relative peak intensities, genesis modes, half lives, parent-daughter relationships, etc. The rule base is furthermore extensible by the user. This is not an original contribution but a somewhat updated version of papers and reports previously published elsewhere. (author)

  5. Recessive VARS2 mutation underlies a novel syndrome with epilepsy, mental retardation, short stature, growth hormone deficiency, and hypogonadism

    KAUST Repository

    Alsemari, Abdulaziz

    2017-11-14

    Most mitochondrial and cytoplasmic aminoacyl-tRNA synthetases (aaRSs) are encoded by nuclear genes. Syndromic disorders resulting from mutation of aaRSs genes display significant phenotypic heterogeneity. We expand aaRSs-related phenotypes through characterization of the clinical and molecular basis of a novel autosomal-recessive syndrome manifesting severe mental retardation, ataxia, speech impairment, epilepsy, short stature, microcephaly, hypogonadism, and growth hormone deficiency.A G>A variant in exon 29 of VARS2 (c.3650G>A) (NM_006295) was identified in the index case. This homozygous variant was confirmed by Sanger sequencing and segregated with disease in the family studied. The c.3650G>A change results in alteration of arginine to histidine at residue 1217 (R1217H) of the mature protein and is predicted to be pathogenic.These findings contribute to a growing list of aaRSs disorders, broadens the spectrum of phenotypes attributable to VARS2 mutations, and provides new insight into genotype-phenotype correlations among the mitochondrial synthetase genes.

  6. Recessive VARS2 mutation underlies a novel syndrome with epilepsy, mental retardation, short stature, growth hormone deficiency, and hypogonadism

    KAUST Repository

    Alsemari, Abdulaziz; Al-Younes, Banan; Goljan, Ewa; Jaroudi, Dyala; BinHumaid, Faisal; Meyer, Brian F.; Arold, Stefan T.; Monies, Dorota

    2017-01-01

    Most mitochondrial and cytoplasmic aminoacyl-tRNA synthetases (aaRSs) are encoded by nuclear genes. Syndromic disorders resulting from mutation of aaRSs genes display significant phenotypic heterogeneity. We expand aaRSs-related phenotypes through characterization of the clinical and molecular basis of a novel autosomal-recessive syndrome manifesting severe mental retardation, ataxia, speech impairment, epilepsy, short stature, microcephaly, hypogonadism, and growth hormone deficiency.A G>A variant in exon 29 of VARS2 (c.3650G>A) (NM_006295) was identified in the index case. This homozygous variant was confirmed by Sanger sequencing and segregated with disease in the family studied. The c.3650G>A change results in alteration of arginine to histidine at residue 1217 (R1217H) of the mature protein and is predicted to be pathogenic.These findings contribute to a growing list of aaRSs disorders, broadens the spectrum of phenotypes attributable to VARS2 mutations, and provides new insight into genotype-phenotype correlations among the mitochondrial synthetase genes.

  7. A Web-Based Rice Plant Expert System Using Rule-Based Reasoning

    Directory of Open Access Journals (Sweden)

    Anton Setiawan Honggowibowo

    2009-12-01

    Full Text Available Rice plants can be attacked by various kinds of diseases which are possible to be determined from their symptoms. However, it is to recognize that to find out the exact type of disease, an agricultural expert’s opinion is needed, meanwhile the numbers of agricultural experts are limited and there are too many problems to be solved at the same time. This makes a system with a capability as an expert is required. This system must contain the knowledge of the diseases and symptom of rice plants as an agricultural expert has to have. This research designs a web-based expert system using rule-based reasoning. The rule are modified from the method of forward chaining inference and backward chaining in order to to help farmers in the rice plant disease diagnosis. The web-based rice plants disease diagnosis expert system has the advantages to access and use easily. With web-based features inside, it is expected that the farmer can accesse the expert system everywhere to overcome the problem to diagnose rice diseases.

  8. Consolidity: Stack-based systems change pathway theory elaborated

    Directory of Open Access Journals (Sweden)

    Hassen Taher Dorrah

    2014-06-01

    Full Text Available This paper presents an elaborated analysis for investigating the stack-based layering processes during the systems change pathway. The system change pathway is defined as the path resulting from the combinations of all successive changes induced on the system when subjected to varying environments, activities, events, or any excessive internal or external influences and happenings “on and above” its normal stands, situations or set-points during its course of life. The analysis is essentially based on the important overall system paradigm of “Time driven-event driven-parameters change”. Based on this paradigm, it is considered that any affected activity, event or varying environment is intelligently self-recorded inside the system through an incremental consolidity-scaled change in system parameters of the stack-based layering types. Various joint stack-based mathematical and graphical approaches supported by representable case studies are suggested for the identification, extraction, and processing of various stack-based systems changes layering of different classifications and categorizations. Moreover, some selected real life illustrative applications are provided to demonstrate the (infinite stack-based identification and recognition of the change pathway process in the areas of geology, archeology, life sciences, ecology, environmental science, engineering, materials, medicine, biology, sociology, humanities, and other important fields. These case studies and selected applications revealed that there are general similarities of the stack-based layering structures and formations among all the various research fields. Such general similarities clearly demonstrate the global concept of the “fractals-general stacking behavior” of real life systems during their change pathways. Therefore, it is recommended that concentrated efforts should be expedited toward building generic modular stack-based systems or blocks for the mathematical

  9. LSI-11 based multiparameter system

    International Nuclear Information System (INIS)

    Patwardhan, P.K.; Chatur, C.G.; Gupta, J.D.; Kumar, Sudhir

    1981-01-01

    This paper describes a LSI-11 based nuclear data processing system having four parameter capability. The system features simultaneous data acquisition and processing in independent memory zones. It also incorporates useful resident application programs and a built-in dual trace display. (author)

  10. Respiratory severity score and extubation readiness in very low birth weight infants

    Directory of Open Access Journals (Sweden)

    Maroun J. Mhanna

    2017-12-01

    Full Text Available Background: The respiratory severity score (RSS is a byproduct of mean airway pressure (MAP and fraction of inspired oxygen (FiO2. We sought to determine whether RSS could be used as a screening tool to predict extubation readiness in very low birth weight (VLBW infants. Methods: In a retrospective cohort study, medical records of all VLBW infants admitted to our unit (6/1/09–2/28/12 were reviewed for infants' demographics, prenatal characteristics, and medication use. Also, records were reviewed for unplanned vs. planned extubation, blood gas, ventilator parameters and signs of severe respiratory failure [RF, defined as partial pressure of carbon dioxide (pCO2 > 65, pH  50%, and MAP > 10 cm] on the day of extubation. Results: During the study period 31% (45/147 failed extubation. Overall, infants who failed extubation had a lower birth weight (BW and gestational age (GA, and on the day of extubation had a higher RSS and percentage of having one or more signs of severe RF. In a logistic regression model, adjusting for BW, GA, RSS and RF, RSS remained the only risk factor associated with extubation failure [adjusted OR 1.63 (95% CI: 1.10–2.40; p = 0.01]. RSS had a sensitivity of 0.86 (95% CI: 0.72–0.94 at a cutoff of 1.26 and a specificity of 0.88 (95% CI: 0.80–0.94 at a cutoff of 2.5. There was no difference in extubation failure between unplanned vs. planned extubation [41% (9/22 vs. 29% (36/125; p = 0.25]. Conclusion: An elevated RSS is associated with extubation failure. Successful unplanned extubation is common in VLBW infants. Key Words: very low birth weight, extubation, mechanical ventilation, respiratory severity score

  11. Adaptive web data extraction policies

    Directory of Open Access Journals (Sweden)

    Provetti, Alessandro

    2008-12-01

    Full Text Available Web data extraction is concerned, among other things, with routine data accessing and downloading from continuously-updated dynamic Web pages. There is a relevant trade-off between the rate at which the external Web sites are accessed and the computational burden on the accessing client. We address the problem by proposing a predictive model, typical of the Operating Systems literature, of the rate-of-update of each Web source. The presented model has been implemented into a new version of the Dynamo project: a middleware that assists in generating informative RSS feeds out of traditional HTML Web sites. To be effective, i.e., make RSS feeds be timely and informative and to be scalable, Dynamo needs a careful tuning and customization of its polling policies, which are described in detail.

  12. Review of the systems biology of the immune system using agent-based models.

    Science.gov (United States)

    Shinde, Snehal B; Kurhekar, Manish P

    2018-06-01

    The immune system is an inherent protection system in vertebrate animals including human beings that exhibit properties such as self-organisation, self-adaptation, learning, and recognition. It interacts with the other allied systems such as the gut and lymph nodes. There is a need for immune system modelling to know about its complex internal mechanism, to understand how it maintains the homoeostasis, and how it interacts with the other systems. There are two types of modelling techniques used for the simulation of features of the immune system: equation-based modelling (EBM) and agent-based modelling. Owing to certain shortcomings of the EBM, agent-based modelling techniques are being widely used. This technique provides various predictions for disease causes and treatments; it also helps in hypothesis verification. This study presents a review of agent-based modelling of the immune system and its interactions with the gut and lymph nodes. The authors also review the modelling of immune system interactions during tuberculosis and cancer. In addition, they also outline the future research directions for the immune system simulation through agent-based techniques such as the effects of stress on the immune system, evolution of the immune system, and identification of the parameters for a healthy immune system.

  13. Selection of tRNA charging quality control mechanisms that increase mistranslation of the genetic code

    DEFF Research Database (Denmark)

    Yadavalli, Srujana S; Ibba, Michael

    2013-01-01

    Mistranslation can follow two events during protein synthesis: production of non-cognate amino acid:transfer RNA (tRNA) pairs by aminoacyl-tRNA synthetases (aaRSs) and inaccurate selection of aminoacyl-tRNAs by the ribosome. Many aaRSs actively edit non-cognate amino acids, but editing mechanisms...

  14. 77 FR 65937 - Pioneer Railcorp-Continuation in Control Exemption-Rail Switching Services, Inc.

    Science.gov (United States)

    2012-10-31

    ... control of Rail Switching Services, Inc. (RSS), upon RSS's becoming a Class III rail carrier. \\1\\ Pioneer states that it owns 100% of the common stock of its 17 Class III rail carrier subsidiaries: West Michigan...--Continuation in Control Exemption--Rail Switching Services, Inc. Pioneer Railcorp (Pioneer) and its...

  15. System and method for deriving a process-based specification

    Science.gov (United States)

    Hinchey, Michael Gerard (Inventor); Rash, James Larry (Inventor); Rouff, Christopher A. (Inventor)

    2009-01-01

    A system and method for deriving a process-based specification for a system is disclosed. The process-based specification is mathematically inferred from a trace-based specification. The trace-based specification is derived from a non-empty set of traces or natural language scenarios. The process-based specification is mathematically equivalent to the trace-based specification. Code is generated, if applicable, from the process-based specification. A process, or phases of a process, using the features disclosed can be reversed and repeated to allow for an interactive development and modification of legacy systems. The process is applicable to any class of system, including, but not limited to, biological and physical systems, electrical and electro-mechanical systems in addition to software, hardware and hybrid hardware-software systems.

  16. Spatial sparsity based indoor localization in wireless sensor network for assistive healthcare.

    Science.gov (United States)

    Pourhomayoun, Mohammad; Jin, Zhanpeng; Fowler, Mark

    2012-01-01

    Indoor localization is one of the key topics in the area of wireless networks with increasing applications in assistive healthcare, where tracking the position and actions of the patient or elderly are required for medical observation or accident prevention. Most of the common indoor localization methods are based on estimating one or more location-dependent signal parameters like TOA, AOA or RSS. However, some difficulties and challenges caused by the complex scenarios within a closed space significantly limit the applicability of those existing approaches in an indoor assistive environment, such as the well-known multipath effect. In this paper, we develop a new one-stage localization method based on spatial sparsity of the x-y plane. In this method, we directly estimate the location of the emitter without going through the intermediate stage of TOA or signal strength estimation. We evaluate the performance of the proposed method using Monte Carlo simulation. The results show that the proposed method is (i) very accurate even with a small number of sensors and (ii) very effective in addressing the multi-path issues.

  17. Multi-Attribute Decision-Making Method Based on Neutrosophic Soft Rough Information

    Directory of Open Access Journals (Sweden)

    Muhammad Akram

    2018-03-01

    Full Text Available Soft sets (SSs, neutrosophic sets (NSs, and rough sets (RSs are different mathematical models for handling uncertainties, but they are mutually related. In this research paper, we introduce the notions of soft rough neutrosophic sets (SRNSs and neutrosophic soft rough sets (NSRSs as hybrid models for soft computing. We describe a mathematical approach to handle decision-making problems in view of NSRSs. We also present an efficient algorithm of our proposed hybrid model to solve decision-making problems.

  18. Filmless versus film-based systems in radiographic examination costs: an activity-based costing method

    Directory of Open Access Journals (Sweden)

    Sase Yuji

    2011-09-01

    Full Text Available Abstract Background Since the shift from a radiographic film-based system to that of a filmless system, the change in radiographic examination costs and costs structure have been undetermined. The activity-based costing (ABC method measures the cost and performance of activities, resources, and cost objects. The purpose of this study is to identify the cost structure of a radiographic examination comparing a filmless system to that of a film-based system using the ABC method. Methods We calculated the costs of radiographic examinations for both a filmless and a film-based system, and assessed the costs or cost components by simulating radiographic examinations in a health clinic. The cost objects of the radiographic examinations included lumbar (six views, knee (three views, wrist (two views, and other. Indirect costs were allocated to cost objects using the ABC method. Results The costs of a radiographic examination using a filmless system are as follows: lumbar 2,085 yen; knee 1,599 yen; wrist 1,165 yen; and other 1,641 yen. The costs for a film-based system are: lumbar 3,407 yen; knee 2,257 yen; wrist 1,602 yen; and other 2,521 yen. The primary activities were "calling patient," "explanation of scan," "take photographs," and "aftercare" for both filmless and film-based systems. The cost of these activities cost represented 36.0% of the total cost for a filmless system and 23.6% of a film-based system. Conclusions The costs of radiographic examinations using a filmless system and a film-based system were calculated using the ABC method. Our results provide clear evidence that the filmless system is more effective than the film-based system in providing greater value services directly to patients.

  19. Filmless versus film-based systems in radiographic examination costs: an activity-based costing method.

    Science.gov (United States)

    Muto, Hiroshi; Tani, Yuji; Suzuki, Shigemasa; Yokooka, Yuki; Abe, Tamotsu; Sase, Yuji; Terashita, Takayoshi; Ogasawara, Katsuhiko

    2011-09-30

    Since the shift from a radiographic film-based system to that of a filmless system, the change in radiographic examination costs and costs structure have been undetermined. The activity-based costing (ABC) method measures the cost and performance of activities, resources, and cost objects. The purpose of this study is to identify the cost structure of a radiographic examination comparing a filmless system to that of a film-based system using the ABC method. We calculated the costs of radiographic examinations for both a filmless and a film-based system, and assessed the costs or cost components by simulating radiographic examinations in a health clinic. The cost objects of the radiographic examinations included lumbar (six views), knee (three views), wrist (two views), and other. Indirect costs were allocated to cost objects using the ABC method. The costs of a radiographic examination using a filmless system are as follows: lumbar 2,085 yen; knee 1,599 yen; wrist 1,165 yen; and other 1,641 yen. The costs for a film-based system are: lumbar 3,407 yen; knee 2,257 yen; wrist 1,602 yen; and other 2,521 yen. The primary activities were "calling patient," "explanation of scan," "take photographs," and "aftercare" for both filmless and film-based systems. The cost of these activities cost represented 36.0% of the total cost for a filmless system and 23.6% of a film-based system. The costs of radiographic examinations using a filmless system and a film-based system were calculated using the ABC method. Our results provide clear evidence that the filmless system is more effective than the film-based system in providing greater value services directly to patients.

  20. Dynamic reasoning in a knowledge-based system

    Science.gov (United States)

    Rao, Anand S.; Foo, Norman Y.

    1988-01-01

    Any space based system, whether it is a robot arm assembling parts in space or an onboard system monitoring the space station, has to react to changes which cannot be foreseen. As a result, apart from having domain-specific knowledge as in current expert systems, a space based AI system should also have general principles of change. This paper presents a modal logic which can not only represent change but also reason with it. Three primitive operations, expansion, contraction and revision are introduced and axioms which specify how the knowledge base should change when the external world changes are also specified. Accordingly the notion of dynamic reasoning is introduced, which unlike the existing forms of reasoning, provide general principles of change. Dynamic reasoning is based on two main principles, namely minimize change and maximize coherence. A possible-world semantics which incorporates the above two principles is also discussed. The paper concludes by discussing how the dynamic reasoning system can be used to specify actions and hence form an integral part of an autonomous reasoning and planning system.

  1. Information retrieval system based on INIS tapes

    International Nuclear Information System (INIS)

    Pultorak, G.

    1976-01-01

    An information retrieval system based on the INIS computer tapes is described. It includes the three main elements of a computerized information system: a data base on a machine -readable medium, a collection of queries which represent the information needs from the data - base, and a set of programs by which the actual retrieval is done, according to the user's queries. The system is built for the center's computer, a CDC 3600, and its special features characterize, to a certain degree, the structure of the programs. (author)

  2. Critical review of the reactor-safety study radiological health effects model. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, D.W.; Evans, J.S.; Jacob, N.; Kase, K.R.; Maletskos, C.J.; Robertson, J.B.; Smith, D.G.

    1983-03-01

    This review of the radiological health effects models originally presented in the Reactor Safety Study (RSS) and currently used by the US Nuclear Regulatory Commission (NRC) was undertaken to assist the NRC in determining whether or not to revise the models and to aid in the revision, if undertaken. The models as presented in the RSS and as implemented in the CRAC (Calculations of Reactor Accident Consequences) Code are described and critiqued. The major elements analyzed are those concerning dosimetry, early effects, and late effects. The published comments on the models are summarized, as are the important findings since the publication of the RSS.

  3. Critical review of the reactor-safety study radiological health effects model. Final report

    International Nuclear Information System (INIS)

    Cooper, D.W.; Evans, J.S.; Jacob, N.; Kase, K.R.; Maletskos, C.J.; Robertson, J.B.; Smith, D.G.

    1983-03-01

    This review of the radiological health effects models originally presented in the Reactor Safety Study (RSS) and currently used by the US Nuclear Regulatory Commission (NRC) was undertaken to assist the NRC in determining whether or not to revise the models and to aid in the revision, if undertaken. The models as presented in the RSS and as implemented in the CRAC (Calculations of Reactor Accident Consequences) Code are described and critiqued. The major elements analyzed are those concerning dosimetry, early effects, and late effects. The published comments on the models are summarized, as are the important findings since the publication of the RSS

  4. RANCANG BANGUN APLIKASI PENGAMBILAN BERITA SECARA OTOMATIS MENGGUNAKAN CONTENT SYNDICATION BERBASIS XML DENGAN PLATFORM MICROSOFT .NET

    Directory of Open Access Journals (Sweden)

    Diana Purwitasari

    2004-01-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Banyaknya kebutuhan akan informasi di internet menyebabkan penyedia jasa situs berita untuk memberikan berita yang selalu yang terbaru. Salah satu alternatif solusi adalah dengan melakukan content syndication. Content syndication adalah adalah proses dimana suatu isi berita dikirimkan atau disediakan, biasanya dengan biaya tertentu, dari penyedia berita, biasanya disebut originators, ke pasar yang membutuhkan atau subscribers. RSS (Rich Site Summary adalah format yang secara umum digunakan untuk melakukannya. RSS pada dasarnya adalah suatu file yang berada di suatu situs, yang menyediakan informasi tentang isi dari situs tersebut. File tersebut biasa disebut sebagai RSS Feeds dan dapat di ambil dan diolah untuk mendapatkan informasi tentang isi situs tersebut. Dibuat sebuah aplikasi untuk pengambilan situs berita secara otomatis menggunakan content syndication yang memerlukan aplikasi pada proses background untuk mengambil RSS Feeds secara berkala pada komputer yang berfungsi sebagai server. Server yang mengambil berita dari situs penyedia terdiri dari aplikasi yang mengatur konfigurasi berita tersebut, dan sebuah windows service untuk mengambil RSS feeds kemudian mengolahnya secara otomatis. Sedangkan aplikasi

  5. A embedded Linux system based on PowerPC

    International Nuclear Information System (INIS)

    Ye Mei; Zhao Jingwei; Chu Yuanping

    2006-01-01

    The authors will introduce a Embedded Linux System based on PowerPC as well as the base method on how to establish the system. The goal of the system is to build a test system of VMEbus device. It also can be used to setup the small data acquisition and control system. Two types of compiler are provided by the developer system according to the features of the system and the Power PC. At the top of the article some typical embedded Operation system will be introduced and the features of different system will be provided. And then the method on how to build a embedded Linux system as well as the key technique will be discussed in detail. Finally a successful read-write example will be given based on the test system. (authors)

  6. KBGIS-2: A knowledge-based geographic information system

    Science.gov (United States)

    Smith, T.; Peuquet, D.; Menon, S.; Agarwal, P.

    1986-01-01

    The architecture and working of a recently implemented knowledge-based geographic information system (KBGIS-2) that was designed to satisfy several general criteria for the geographic information system are described. The system has four major functions that include query-answering, learning, and editing. The main query finds constrained locations for spatial objects that are describable in a predicate-calculus based spatial objects language. The main search procedures include a family of constraint-satisfaction procedures that use a spatial object knowledge base to search efficiently for complex spatial objects in large, multilayered spatial data bases. These data bases are represented in quadtree form. The search strategy is designed to reduce the computational cost of search in the average case. The learning capabilities of the system include the addition of new locations of complex spatial objects to the knowledge base as queries are answered, and the ability to learn inductively definitions of new spatial objects from examples. The new definitions are added to the knowledge base by the system. The system is currently performing all its designated tasks successfully, although currently implemented on inadequate hardware. Future reports will detail the performance characteristics of the system, and various new extensions are planned in order to enhance the power of KBGIS-2.

  7. A hybrid positioning strategy for vehicles in a tunnel based on RFID and in-vehicle sensors.

    Science.gov (United States)

    Song, Xiang; Li, Xu; Tang, Wencheng; Zhang, Weigong; Li, Bin

    2014-12-05

    Many intelligent transportation system applications require accurate, reliable, and continuous vehicle positioning. How to achieve such positioning performance in extended GPS-denied environments such as tunnels is the main challenge for land vehicles. This paper proposes a hybrid multi-sensor fusion strategy for vehicle positioning in tunnels. First, the preliminary positioning algorithm is developed. The Radio Frequency Identification (RFID) technology is introduced to achieve preliminary positioning in the tunnel. The received signal strength (RSS) is used as an indicator to calculate the distances between the RFID tags and reader, and then a Least Mean Square (LMS) federated filter is designed to provide the preliminary position information for subsequent global fusion. Further, to improve the positioning performance in the tunnel, an interactive multiple model (IMM)-based global fusion algorithm is developed to fuse the data from preliminary positioning results and low-cost in-vehicle sensors, such as electronic compasses and wheel speed sensors. In the actual implementation of IMM, the strong tracking extended Kalman filter (STEKF) algorithm is designed to replace the conventional extended Kalman filter (EKF) to achieve model individual filtering. Finally, the proposed strategy is evaluated through experiments. The results validate the feasibility and effectiveness of the proposed strategy.

  8. A Hybrid Positioning Strategy for Vehicles in a Tunnel Based on RFID and In-Vehicle Sensors

    Directory of Open Access Journals (Sweden)

    Xiang Song

    2014-12-01

    Full Text Available Many intelligent transportation system applications require accurate, reliable, and continuous vehicle positioning. How to achieve such positioning performance in extended GPS-denied environments such as tunnels is the main challenge for land vehicles. This paper proposes a hybrid multi-sensor fusion strategy for vehicle positioning in tunnels. First, the preliminary positioning algorithm is developed. The Radio Frequency Identification (RFID technology is introduced to achieve preliminary positioning in the tunnel. The received signal strength (RSS is used as an indicator to calculate the distances between the RFID tags and reader, and then a Least Mean Square (LMS federated filter is designed to provide the preliminary position information for subsequent global fusion. Further, to improve the positioning performance in the tunnel, an interactive multiple model (IMM-based global fusion algorithm is developed to fuse the data from preliminary positioning results and low-cost in-vehicle sensors, such as electronic compasses and wheel speed sensors. In the actual implementation of IMM, the strong tracking extended Kalman filter (STEKF algorithm is designed to replace the conventional extended Kalman filter (EKF to achieve model individual filtering. Finally, the proposed strategy is evaluated through experiments. The results validate the feasibility and effectiveness of the proposed strategy.

  9. Protein Translation Enzyme lysyl-tRNA Synthetase Presents a New Target for Drug Development against Causative Agents of Loiasis and Schistosomiasis.

    Directory of Open Access Journals (Sweden)

    Arvind Sharma

    2016-11-01

    Full Text Available Helminth parasites are an assemblage of two major phyla of nematodes (also known as roundworms and platyhelminths (also called flatworms. These parasites are a major human health burden, and infections caused by helminths are considered under neglected tropical diseases (NTDs. These infections are typified by limited clinical treatment options and threat of drug resistance. Aminoacyl-tRNA synthetases (aaRSs are vital enzymes that decode genetic information and enable protein translation. The specific inhibition of pathogen aaRSs bores well for development of next generation anti-parasitics. Here, we have identified and annotated aaRSs and accessory proteins from Loa loa (nematode and Schistosoma mansoni (flatworm to provide a glimpse of these protein translation enzymes within these parasites. Using purified parasitic lysyl-tRNA synthetases (KRSs, we developed series of assays that address KRS enzymatic activity, oligomeric states, crystal structure and inhibition profiles. We show that L. loa and S. mansoni KRSs are potently inhibited by the fungal metabolite cladosporin. Our co-crystal structure of Loa loa KRS-cladosporin complex reveals key interacting residues and provides a platform for structure-based drug development. This work hence provides a new direction for both novel target discovery and inhibitor development against eukaryotic pathogens that include L. loa and S. mansoni.

  10. Protein Translation Enzyme lysyl-tRNA Synthetase Presents a New Target for Drug Development against Causative Agents of Loiasis and Schistosomiasis.

    Science.gov (United States)

    Sharma, Arvind; Sharma, Manmohan; Yogavel, Manickam; Sharma, Amit

    2016-11-01

    Helminth parasites are an assemblage of two major phyla of nematodes (also known as roundworms) and platyhelminths (also called flatworms). These parasites are a major human health burden, and infections caused by helminths are considered under neglected tropical diseases (NTDs). These infections are typified by limited clinical treatment options and threat of drug resistance. Aminoacyl-tRNA synthetases (aaRSs) are vital enzymes that decode genetic information and enable protein translation. The specific inhibition of pathogen aaRSs bores well for development of next generation anti-parasitics. Here, we have identified and annotated aaRSs and accessory proteins from Loa loa (nematode) and Schistosoma mansoni (flatworm) to provide a glimpse of these protein translation enzymes within these parasites. Using purified parasitic lysyl-tRNA synthetases (KRSs), we developed series of assays that address KRS enzymatic activity, oligomeric states, crystal structure and inhibition profiles. We show that L. loa and S. mansoni KRSs are potently inhibited by the fungal metabolite cladosporin. Our co-crystal structure of Loa loa KRS-cladosporin complex reveals key interacting residues and provides a platform for structure-based drug development. This work hence provides a new direction for both novel target discovery and inhibitor development against eukaryotic pathogens that include L. loa and S. mansoni.

  11. Attribute-Based Digital Signature System

    NARCIS (Netherlands)

    Ibraimi, L.; Asim, Muhammad; Petkovic, M.

    2011-01-01

    An attribute-based digital signature system comprises a signature generation unit (1) for signing a message (m) by generating a signature (s) based on a user secret key (SK) associated with a set of user attributes, wherein the signature generation unit (1) is arranged for combining the user secret

  12. System-Awareness for Agent-based Power System Control

    DEFF Research Database (Denmark)

    Heussen, Kai; Saleem, Arshad; Lind, Morten

    2010-01-01

    transition. This paper presents a concept for the representation and organization of control- and resource-allocation, enabling computational reasoning and system awareness. The principles are discussed with respect to a recently proposed Subgrid operation concept.......Operational intelligence in electric power systems is focused in a small number of control rooms that coordinate their actions. A clear division of responsibility and a command hierarchy organize system operation. With multi-agent based control systems, this control paradigm may be shifted...... to a more decentralized openaccess collaboration control paradigm. This shift cannot happen at once, but must fit also with current operation principles. In order to establish a scalable and transparent system control architecture, organizing principles have to be identified that allow for a smooth...

  13. Cross-Layer Design Approach for Power Control in Mobile Ad Hoc Networks

    Directory of Open Access Journals (Sweden)

    A. Sarfaraz Ahmed

    2015-03-01

    Full Text Available In mobile ad hoc networks, communication among mobile nodes occurs through wireless medium The design of ad hoc network protocol, generally based on a traditional “layered approach”, has been found ineffective to deal with receiving signal strength (RSS-related problems, affecting the physical layer, the network layer and transport layer. This paper proposes a design approach, deviating from the traditional network design, toward enhancing the cross-layer interaction among different layers, namely physical, MAC and network. The Cross-Layer design approach for Power control (CLPC would help to enhance the transmission power by averaging the RSS values and to find an effective route between the source and the destination. This cross-layer design approach was tested by simulation (NS2 simulator and its performance over AODV was found to be better.

  14. InfoGallery: Informative Arts Services for Physical Library Spaces

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Rohde, Anne; Sundararajah, Balasuthas

    2006-01-01

    Much focus in digital libraries research has been devoted to new online services rather than services for the visitors in the physical library. This paper describes InfoGallery, which is a web-based infrastructure for enriching the physical library space with informative art "exhibitions......" of digital library material and other relevant information, such as RSS news streams, event announcements etc. InfoGallery presents information in an aesthetically attractive manner on a variety of surfaces in the library, including cylindrical displays and floors. The infrastructure consists of a server...... structure, an editor application and a variety of display clients. The paper discusses the design of the infrastructure and its utilization of RSS, podcasts and manually edited news. Applications in the library domain are described and the experiences are discussed....

  15. A Nuclear Safety System based on Industrial Computer

    International Nuclear Information System (INIS)

    Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack

    2011-01-01

    The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

  16. A Nuclear Safety System based on Industrial Computer

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack [Korea Electric Power Corporation Engineering and Construction, Daejeon (Korea, Republic of)

    2011-05-15

    The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

  17. The development of component-based information systems

    CERN Document Server

    Cesare, Sergio de; Macredie, Robert

    2015-01-01

    This work provides a comprehensive overview of research and practical issues relating to component-based development information systems (CBIS). Spanning the organizational, developmental, and technical aspects of the subject, the original research included here provides fresh insights into successful CBIS technology and application. Part I covers component-based development methodologies and system architectures. Part II analyzes different aspects of managing component-based development. Part III investigates component-based development versus commercial off-the-shelf products (COTS), includi

  18. Microemulsions based transdermal drug delivery systems.

    Science.gov (United States)

    Vadlamudi, Harini C; Narendran, Hyndavi; Nagaswaram, Tejeswari; Yaga, Gowri; Thanniru, Jyotsna; Yalavarthi, Prasanna R

    2014-01-01

    Since the discovery of microemulsions by Jack H Schulman, there has been huge progress made in applying microemulsion systems in plethora of research and industrial process. Microemulsions are optically isotropic systems consisting of water, oil and amphiphile. These systems are beneficial due to their thermodynamic stability, optical clarity, ease of preparation, higher diffusion and absorption rates. Moreover, it has been reported that the ingredients of microemulsion can effectively overcome the diffusion barrier and penetrate through the stratum corneum of the skin. Hence it becomes promising for both transdermal and dermal drug delivery. However, low viscosity of microemulsion restrains its applicability in pharmaceutical industry. To overcome the above drawback, the low viscous microemulsions were added to viscous gel bases to potentiate its applications as topical drug delivery systems so that various drug related toxic effects and erratic drug absorption can be avoided. The present review deals with the microemulsions, various techniques involved in the development of organic nanoparticles. The review emphasized on microemulsion based systems such as hydrogels and organogels. The physicochemical characteristics, mechanical properties, rheological and stability principles involved in microemulsion based viscous gels were also explored.

  19. Dual, use-based definition of "system"

    CSIR Research Space (South Africa)

    Gonçalves, DP

    2015-09-01

    Full Text Available The standard definition (ISO 15288, 2008) of the concept of a system is not complete and is the definition of a closed system. Such a definition is inadequate for systems engineering. A use-based definition is proposed which spans the open...

  20. A Study on the use of Facebook, RSS, Blogs and Twitter (Web2.0) among selected academic libraries from 6 Gulf countries namely: Kingdom of Saudi Arabia, United Arab Emirates, Qatar, Bahrain, Oman and Kuwait

    KAUST Repository

    Ramli, Rindra M.

    2014-04-01

    This paper aims to explore and study the current usage trends of Web2.0 namely Facebook, RSS, Blogs and Twitter among selected higher education institutions’ libraries in 6 gulf countries namely: Kingdom of Saudi Arabia, United Arab Emirates, Qatar, Bahrain, Oman and Kuwait. Websites of the selected libraries would be compared on the extent of the usage of these tools, the participation level and their purpose. The author would also share his opinion and suggestions on improving the current trends pertaining to the area of Web2.0 and libraries. The impact and importance of Web2.0 on libraries cannot be disputed. Since gaining popularity in mid-2000, libraries around the globe have jumped onto the Web2.0 bandwagon. Among the common examples of Web2.0 used by libraries today are namely: social networking sites, blogs, wikis, folksonomies and video sharing sites. Libraries are using Web2.0 to (among others): • market their services / resources to their community, • announce latest library news, • provide their online guides / notes for their resources among others. Though such tools have been implemented by most libraries around the world, some of the challenges faced by libraries are: •participation level – casting the net to a wider audience •selection of web2.0 tools •effectiveness of present web2.0 tools used by the libraries

  1. Verifying real-time systems against scenario-based requirements

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand; Li, Shuhao; Nielsen, Brian

    2009-01-01

    We propose an approach to automatic verification of real-time systems against scenario-based requirements. A real-time system is modeled as a network of Timed Automata (TA), and a scenario-based requirement is specified as a Live Sequence Chart (LSC). We define a trace-based semantics for a kernel...... subset of the LSC language. By equivalently translating an LSC chart into an observer TA and then non-intrusively composing this observer with the original system model, the problem of verifying a real-time system against a scenario-based requirement reduces to a classical real-time model checking...

  2. Consistency conditions for data base systems: a new problem of systems analysis

    International Nuclear Information System (INIS)

    Schlageter, G.

    1976-01-01

    A data base can be seen as a model of a system in the real world. During the systems analysis conditions must be derived which guarantee a close correspondence between the real system and the data base. These conditions are called consistency constraints. The notion of consistency is analyzed; different types of consistency constraints are presented. (orig.) [de

  3. Parliamentary Majorities and National Minorities: Moldova’s Accommodation of the Gagauz

    Science.gov (United States)

    2007-01-01

    Al R.S.S. Moldova Pentru Problemele i and Mihai Cotorobai, 26 . Nationale Shi Autoadminstrararea Locala Shi Economia Locala, signed by A. Arsen...No ———. Avizul Comissiilor Permanente Ale Soveitului Suprem al R.S.S. Moldova p şi Autoadminstrararea Localâ şi Economia Localâ. Signed by A. Arseni

  4. Enhancing Access to Land Remote Sensing Data through Mainstream Social Media Channels

    Science.gov (United States)

    Sohre, T.; Maiersperger, T.

    2011-12-01

    Social media tools are changing the way that people discover information, communicate, and collaborate. Government agencies supporting the Land Remote Sensing user community have begun taking advantage of standard social media tools and capabilities. National Aeronautics and Space Administration (NASA) Earth Observing System (EOS) data centers have started providing outreach utilizing services including Facebook, Twitter, and YouTube videos. Really Simple Syndication (RSS) Feeds have become more standard means of sharing information, and a DataCasting tool was created as a NASA Technology Infusion effort to make RSS-based technology for accessing Earth Science information available. The United States Geological Survey (USGS) has also started using social media to allow the community access to news feeds and real-time earthquake alerts; listen to podcasts; get updates on new USGS publications, videos, and photographs; and more. Twitter feeds have been implemented in 2011 for the USGS Land Cover and Landsat user communities. In early 2011, the NASA Land Processes Distributed Active Archive Center (LP DAAC) user working group suggested the investigation of concepts for creating and distributing "bundles" of data, which would aggregate theme-based data sets from multiple sources. The LP DAAC is planning to explore the use of standard social bookmarking tools to support community developed bundles through the use of tools such as Delicious, Digg, or StumbleUpon. This concept would allow science users to organize and discover common links to data resources based on community developed tags, or a folksonomy. There are challenges that will need to be addressed such as maintaining the quality of tags but a social bookmarking system may have advantages over traditional search engines or formal ontologies for identifying and labeling various data sets relevant to a theme. As classification is done by the community of scientists who understand the data, the tagged data sets

  5. Computer Based Expert Systems.

    Science.gov (United States)

    Parry, James D.; Ferrara, Joseph M.

    1985-01-01

    Claims knowledge-based expert computer systems can meet needs of rural schools for affordable expert advice and support and will play an important role in the future of rural education. Describes potential applications in prediction, interpretation, diagnosis, remediation, planning, monitoring, and instruction. (NEC)

  6. Remote control of microcontroller-based infant stimulating system.

    Science.gov (United States)

    Burunkaya, M; Güler, I

    2000-04-01

    In this paper, a remote-controlled and microcontroller-based cradle is designed and constructed. This system is also called Remote Control of Microcontroller-Based Infant Stimulation System or the RECOMBIS System. Cradle is an infant stimulating system that provides relaxation and sleeping for the baby. RECOMBIS system is designed for healthy full-term newborns to provide safe infant care and provide relaxation and sleeping for the baby. A microcontroller-based electronic circuit was designed and implemented for RECOMBIS system. Electromagnets were controlled by 8-bit PIC16F84 microcontroller, which is programmed using MPASM package. The system works by entering preset values from the keyboard, or pulse code modulated radio frequency remote control system. The control of the system and the motion range were tested. The test results showed that the system provided a good performance.

  7. A SystemC-Based Design Methodology for Digital Signal Processing Systems

    Directory of Open Access Journals (Sweden)

    Christian Haubelt

    2007-03-01

    Full Text Available Digital signal processing algorithms are of big importance in many embedded systems. Due to complexity reasons and due to the restrictions imposed on the implementations, new design methodologies are needed. In this paper, we present a SystemC-based solution supporting automatic design space exploration, automatic performance evaluation, as well as automatic system generation for mixed hardware/software solutions mapped onto FPGA-based platforms. Our proposed hardware/software codesign approach is based on a SystemC-based library called SysteMoC that permits the expression of different models of computation well known in the domain of digital signal processing. It combines the advantages of executability and analyzability of many important models of computation that can be expressed in SysteMoC. We will use the example of an MPEG-4 decoder throughout this paper to introduce our novel methodology. Results from a five-dimensional design space exploration and from automatically mapping parts of the MPEG-4 decoder onto a Xilinx FPGA platform will demonstrate the effectiveness of our approach.

  8. Semi-active control of magnetorheological elastomer base isolation system utilising learning-based inverse model

    Science.gov (United States)

    Gu, Xiaoyu; Yu, Yang; Li, Jianchun; Li, Yancheng

    2017-10-01

    Magnetorheological elastomer (MRE) base isolations have attracted considerable attention over the last two decades thanks to its self-adaptability and high-authority controllability in semi-active control realm. Due to the inherent nonlinearity and hysteresis of the devices, it is challenging to obtain a reasonably complicated mathematical model to describe the inverse dynamics of MRE base isolators and hence to realise control synthesis of the MRE base isolation system. Two aims have been achieved in this paper: i) development of an inverse model for MRE base isolator based on optimal general regression neural network (GRNN); ii) numerical and experimental validation of a real-time semi-active controlled MRE base isolation system utilising LQR controller and GRNN inverse model. The superiority of GRNN inverse model lays in fewer input variables requirement, faster training process and prompt calculation response, which makes it suitable for online training and real-time control. The control system is integrated with a three-storey shear building model and control performance of the MRE base isolation system is compared with bare building, passive-on isolation system and passive-off isolation system. Testing results show that the proposed GRNN inverse model is able to reproduce desired control force accurately and the MRE base isolation system can effectively suppress the structural responses when compared to the passive isolation system.

  9. Vision based systems for UAV applications

    CERN Document Server

    Kuś, Zygmunt

    2013-01-01

    This monograph is motivated by a significant number of vision based algorithms for Unmanned Aerial Vehicles (UAV) that were developed during research and development projects. Vision information is utilized in various applications like visual surveillance, aim systems, recognition systems, collision-avoidance systems and navigation. This book presents practical applications, examples and recent challenges in these mentioned application fields. The aim of the book is to create a valuable source of information for researchers and constructors of solutions utilizing vision from UAV. Scientists, researchers and graduate students involved in computer vision, image processing, data fusion, control algorithms, mechanics, data mining, navigation and IC can find many valuable, useful and practical suggestions and solutions. The latest challenges for vision based systems are also presented.

  10. Complexity and Chaos - State-of-the-Art; List of Works, Experts, Organizations, Projects, Journals, Conferences and Tools

    Science.gov (United States)

    2007-09-01

    business columnist Surowiecki argues that "under the right circumstances, groups are remarkably intelligent, and are often smarter than the smartest people...More recently ComDig has been made available through RSS (Real Simple Syndication ) and we have made efforts to move from text-based content to web

  11. WIRELESS HOME AUTOMATION SYSTEM BASED ON MICROCONTROLLER

    Directory of Open Access Journals (Sweden)

    MUNA H. SALEH

    2017-11-01

    Full Text Available This paper presents the development of Global System Mobile (GSM-based control home air-conditioner for home automation system. The main aim of the prototype development is to reduce electricity wastage. GSM module was used for receiving Short Message Service (SMS from the user’s mobile phone that automatically enable the controller to take any further action such as to switch ON and OFF the home air-conditioner. The system controls the air-conditioner based on the temperature reading through the sensor. Every period temperature sensor sends the degree to Micro Controller Unit (MCU through ZigBee. Based on temperature degree MCU send ON or OFF signal to switch. Additionally, system allows user to operate or shut down the airconditioner remotely through SMS.

  12. Design and implementation of real-time wireless projection system based on ARM embedded system

    Science.gov (United States)

    Long, Zhaohua; Tang, Hao; Huang, Junhua

    2018-04-01

    Aiming at the shortage of existing real-time screen sharing system, a real-time wireless projection system is proposed in this paper. Based on the proposed system, a weight-based frame deletion strategy combined sampling time period and data variation is proposed. By implementing the system on the hardware platform, the results show that the system can achieve good results. The weight-based strategy can improve the service quality, reduce the delay and optimize the real-time customer service system [1].

  13. Radiology information system: a workflow-based approach

    International Nuclear Information System (INIS)

    Zhang, Jinyan; Lu, Xudong; Nie, Hongchao; Huang, Zhengxing; Aalst, W.M.P. van der

    2009-01-01

    Introducing workflow management technology in healthcare seems to be prospective in dealing with the problem that the current healthcare Information Systems cannot provide sufficient support for the process management, although several challenges still exist. The purpose of this paper is to study the method of developing workflow-based information system in radiology department as a use case. First, a workflow model of typical radiology process was established. Second, based on the model, the system could be designed and implemented as a group of loosely coupled components. Each component corresponded to one task in the process and could be assembled by the workflow management system. The legacy systems could be taken as special components, which also corresponded to the tasks and were integrated through transferring non-work- flow-aware interfaces to the standard ones. Finally, a workflow dashboard was designed and implemented to provide an integral view of radiology processes. The workflow-based Radiology Information System was deployed in the radiology department of Zhejiang Chinese Medicine Hospital in China. The results showed that it could be adjusted flexibly in response to the needs of changing process, and enhance the process management in the department. It can also provide a more workflow-aware integration method, comparing with other methods such as IHE-based ones. The workflow-based approach is a new method of developing radiology information system with more flexibility, more functionalities of process management and more workflow-aware integration. The work of this paper is an initial endeavor for introducing workflow management technology in healthcare. (orig.)

  14. Structured Performance Analysis for Component Based Systems

    OpenAIRE

    Salmi , N.; Moreaux , Patrice; Ioualalen , M.

    2012-01-01

    International audience; The Component Based System (CBS) paradigm is now largely used to design software systems. In addition, performance and behavioural analysis remains a required step for the design and the construction of efficient systems. This is especially the case of CBS, which involve interconnected components running concurrent processes. % This paper proposes a compositional method for modeling and structured performance analysis of CBS. Modeling is based on Stochastic Well-formed...

  15. Cobra: A content-based video retrieval system

    NARCIS (Netherlands)

    Petkovic, M.; Jonker, W.; Jensen, C.S.; Jeffery, K.G.; Pokorny, J.; Saltenis, S.; Bertino, E.; Böhm, K.; Jarke, M.

    2002-01-01

    An increasing number of large publicly available video libraries results in a demand for techniques that can manipulate the video data based on content. In this paper, we present a content-based video retrieval system called Cobra. The system supports automatic extraction and retrieval of high-level

  16. Accurate determination of rates from non-uniformly sampled relaxation data

    Energy Technology Data Exchange (ETDEWEB)

    Stetz, Matthew A.; Wand, A. Joshua, E-mail: wand@upenn.edu [University of Pennsylvania Perelman School of Medicine, Johnson Research Foundation and Department of Biochemistry and Biophysics (United States)

    2016-08-15

    The application of non-uniform sampling (NUS) to relaxation experiments traditionally used to characterize the fast internal motion of proteins is quantitatively examined. Experimentally acquired Poisson-gap sampled data reconstructed with iterative soft thresholding are compared to regular sequentially sampled (RSS) data. Using ubiquitin as a model system, it is shown that 25 % sampling is sufficient for the determination of quantitatively accurate relaxation rates. When the sampling density is fixed at 25 %, the accuracy of rates is shown to increase sharply with the total number of sampled points until eventually converging near the inherent reproducibility of the experiment. Perhaps contrary to some expectations, it is found that accurate peak height reconstruction is not required for the determination of accurate rates. Instead, inaccuracies in rates arise from inconsistencies in reconstruction across the relaxation series that primarily manifest as a non-linearity in the recovered peak height. This indicates that the performance of an NUS relaxation experiment cannot be predicted from comparison of peak heights using a single RSS reference spectrum. The generality of these findings was assessed using three alternative reconstruction algorithms, eight different relaxation measurements, and three additional proteins that exhibit varying degrees of spectral complexity. From these data, it is revealed that non-linearity in peak height reconstruction across the relaxation series is strongly correlated with errors in NUS-derived relaxation rates. Importantly, it is shown that this correlation can be exploited to reliably predict the performance of an NUS-relaxation experiment by using three or more RSS reference planes from the relaxation series. The RSS reference time points can also serve to provide estimates of the uncertainty of the sampled intensity, which for a typical relaxation times series incurs no penalty in total acquisition time.

  17. The Southern African Large Telescope project

    Science.gov (United States)

    Buckley, David A. H.; Charles, Philip A.; Nordsieck, Kenneth H.; O'Donoghue, Darragh

    The recently completed Southern African Large Telescope (SALT) is a low cost, innovative, 10 m class optical telescope, which began limited scientific operations in August 2005, just 5 years after ground-breaking. This paper describes the design and construction of SALT, including the first-light instruments, SALTICAM and the Robert Stobie Spectrograph (RSS). A rigorous systems engineering approach has ensured that SALT was built to specification, on budget, close to the original schedule and using a relatively small project team. The design trade-offs, which include an active spherical primary mirror array and a fixed altitude telescope with a prime focus tracker, although restrictive in comparison to conventional telescopes, have resulted in an affordable 10 m class telescope for South Africa and its ten partners. Coupled with an initial set of two seeing-limited instruments that concentrate on the UV-visible region (320 - 900 nm) and featuring some niche observational capabilities, SALT will have an ability to conduct some unique science. This includes high time resolution studies, for which some initial results have already been obtained. Many of the versatile modes available with the RSS - which is currently being commissioned - are unique and provide unparallelled opportunities for imaging polarimetry and spectropolarimetry. Likewise, Multi-Object Spectroscopy (with slit masks) and imaging spectroscopy with the RSS, the latter using Fabry-Perot étalons and interference filters, will extend the multiplex advantage over resolutions from 300 to 9000 and fields of view of 2 to 8 arcminutes. Future instrumentation plans include an extremely stable, fibre-fed, high resolution échelle spectrograph and a near-IR (to between 1.5 to 1.7 μm) extension to the RSS. Future development possibilities include phasing the primary mirror and AO. Finally, extrapolations of the SALT/HET designs to ELT proportions remain viable and are surely more affordable than conventional

  18. Development of FPGA-based safety-related instrumentation and control systems

    Energy Technology Data Exchange (ETDEWEB)

    Oda, N.; Tanaka, A.; Izumi, M.; Tarumi, T.; Sato, T. [Toshiba Corporation, Isogo Nuclear Engineering Center, Yokohama (Japan)

    2004-07-01

    Toshiba has developed systems which perform signal processing by field programmable gate arrays (FPGA) for safety-related instrumentation and control systems. FPGA is a device which consists only of defined digital circuit: hardware, which performs defined processing. FPGA-based system solves issues existing both in the conventional systems operated by analog circuits (analog-based system) and the systems operated by central processing units (CPU-based system). The advantages of applying FPGA are to keep the long-life supply of products, improving testability (verification), and to reduce the drift which may occur in analog-based system. Considering application to safety-related systems, nonvolatile and non rewritable FPGA which is impossible to be changed after once manufactured has been adopted in Toshiba FPGA-based system. The systems which Toshiba developed this time are Power range Monitor (PRM) and Trip Module (TM). These systems are compatible with the conventional analog-based systems and the CPU-based systems. Therefore, requested cost for upgrading will be minimized. Toshiba is planning to expand application of FPGA-based technology by adopting this development method to the other safety-related systems from now on. (authors)

  19. Seryl-tRNA Synthetases from Methanogenic Archaea: Suppression of Bacterial Amber Mutation and Heterologous Toxicity

    Directory of Open Access Journals (Sweden)

    Drasko Boko

    2010-01-01

    Full Text Available Methanogenic archaea possess unusual seryl-tRNA synthetases (SerRS, evolutionarily distinct from the SerRSs found in other archaea, eucaryotes and bacteria. Our recent X-ray structural analysis of Methanosarcina barkeri SerRS revealed an idiosyncratic N-terminal domain and catalytic zinc ion in the active site. To shed further light on substrate discrimination by methanogenic-type SerRS, we set up to explore in vivo the interaction of methanogenic-type SerRSs with their cognate tRNAs in Escherichia coli or Saccharomyces cerevisiae. The expression of various methanogenic-type SerRSs was toxic for E. coli, resulting in the synthesis of erroneous proteins, as revealed by β-galactosidase stability assay. Although SerRSs from methanogenic archaea recognize tRNAsSer from all three domains of life in vitro, the toxicity presumably precluded the complementation of endogenous SerRS function in both, E. coli and S. cerevisiae. However, despite the observed toxicity, coexpression of methanogenic-type SerRS with its cognate tRNA suppressed bacterial amber mutation.

  20. Archaeal CRISPR-based immune systems

    DEFF Research Database (Denmark)

    Garrett, Roger A; Vestergaard, Gisle Alberg; Shah, Shiraz Ali

    2011-01-01

    CRISPR (clustered regularly interspaced short palindromic repeats)-based immune systems are essentially modular with three primary functions: the excision and integration of new spacers, the processing of CRISPR transcripts to yield mature CRISPR RNAs (crRNAs), and the targeting and cleavage...... of foreign nucleic acid. The primary target appears to be the DNA of foreign genetic elements, but the CRISPR/Cmr system that is widespread amongst archaea also specifically targets and cleaves RNA in vitro. The archaeal CRISPR systems tend to be both diverse and complex. Here we examine evidence...... of CRISPR loci and the evidence for intergenomic exchange of CRISPR systems....

  1. How are individual-level social capital and poverty associated with health equity? A study from two Chinese cities

    Directory of Open Access Journals (Sweden)

    Rehnberg Clas

    2009-02-01

    Full Text Available Abstract Background A growing body of literature has demonstrated that higher social capital is associated with improved health conditions. However, some research indicated that the association between social capital and health was substantially attenuated after adjustment for material deprivation. Studies exploring the association between poverty, social capital and health still have some serious limitations. In China, health equity studies focusing on urban poor are scarce. The purpose of this study is therefore to examine how poverty and individual-level social capital in urban China are associated with health equity. Methods Our study is based on a household study sample consisting of 1605 participants in two Chinese cities. For all participants, data on personal characteristics, health status, health care utilisation and social capital were collected. Factor analysis was performed to extract social capital factors. Dichotomised social capital factors were used for logistic regression models. A synergy index (if it is above 1, we can know the existence of the co-operative effect was computed to examine the interaction effect between lack of social capital and poverty. Results Results indicated the poor had an obviously higher probability of belonging to the low individual-level social capital group in all the five dimensions, with the adjusted odds ratios ranging from 1.42 to 2.12. When the other variables were controlled for in the total sample, neighbourhood cohesion (NC, and reciprocity and social support (RSS were statistically associated with poor self-rated health (NC: OR = 1.40; RSS: OR = 1.34. However, for the non-poor sub-sample, no social capital variable was a statistically significant predictor. The synergy index between low individual-level NC and poverty, and between low individual-level RSS and poverty were 1.22 and 1.28, respectively, indicating an aggravating effect between them. Conclusion In this study, we have shown that

  2. A model-based control system concept

    International Nuclear Information System (INIS)

    Aarzen, K.E.

    1992-12-01

    This paper presents an overview of a new concept for DCSs developed within the KBRTCS (Knowledge-Based Real-Time Control Systems) project performed between 1988 and 1991 as a part of the Swedish IT4 programme. The partners of the project have been the Department of Automatic Control at Lund University, Asea Brown Boveri, and during parts of the project, SattControl, and TeleLogic. The aim of the project has been to develop a concept for future generations of DCSs based on a plant database containing a description of the plant together with the control system. The database is object-based and supports multiple views of an objects. A demonstrator is presented where a DCS system of this type is emulated. The demonstrator contains a number of control, monitoring, and diagnosis applications that execute in real time against a simulations of Steritherm sterilization process. (25 refs.)

  3. Diversity requirements for safety critical software-based automation systems

    International Nuclear Information System (INIS)

    Korhonen, J.; Pulkkinen, U.; Haapanen, P.

    1998-03-01

    System vendors nowadays propose software-based systems even for the most critical safety functions in nuclear power plants. Due to the nature and mechanisms of influence of software faults new methods are needed for the safety and reliability evaluation of these systems. In the research project 'Programmable automation systems in nuclear power plants (OHA)' various safety assessment methods and tools for software based systems are developed and evaluated. This report first discusses the (common cause) failure mechanisms in software-based systems, then defines fault-tolerant system architectures to avoid common cause failures, then studies the various alternatives to apply diversity and their influence on system reliability. Finally, a method for the assessment of diversity is described. Other recently published reports in OHA-report series handles the statistical reliability assessment of software based (STUK-YTO-TR 119), usage models in reliability assessment of software-based systems (STUK-YTO-TR 128) and handling of programmable automation in plant PSA-studies (STUK-YTO-TR 129)

  4. Model-based design of adaptive embedded systems

    CERN Document Server

    Hamberg, Roelof; Reckers, Frans; Verriet, Jacques

    2013-01-01

    Today’s embedded systems have to operate in a wide variety of dynamically changing environmental circumstances. Adaptivity, the ability of a system to autonomously adapt itself, is a means to optimise a system’s behaviour to accommodate changes in its environment. It involves making in-product trade-offs between system qualities at system level. The main challenge in the development of adaptive systems is keeping control of the intrinsic complexity of such systems while working with multi-disciplinary teams to create different parts of the system. Model-Based Development of Adaptive Embedded Systems focuses on the development of adaptive embedded systems both from an architectural and methodological point of view. It describes architectural solution patterns for adaptive systems and state-of-the-art model-based methods and techniques to support adaptive system development. In particular, the book describes the outcome of the Octopus project, a cooperation of a multi-disciplinary team of academic and indus...

  5. Economic feasibility of radioactive scrap steel recycling

    International Nuclear Information System (INIS)

    Nichols, F.; Balhiser, R.; Rosholt, D.

    1995-01-01

    In the past, government and commercial nuclear operators treated radioactive scrap steel (RSS) as a liability and disposed of it by burial; this was an accepted and economical solution at that time. Today, environmental concerns about burial are changing the waste disposal picture by (a) causing burial costs to soar rapidly, (b) creating pressure to close existing burial sites, and (c) making it difficult and expensive to open and operate burial facilities. To exacerbate the problem, planned dismantling of nuclear facilities will substantially increase volumes of RSS open-quotes wasteclose quotes over the next 30 yr. This report describes a project with the intention of integrating the current commercial mini-mill approach of recycling uncontaminated steel with radiological controls to design a system that can process contaminated metals at prices significantly below the current processors or burial costs

  6. Internet based remote cooperative engineering system for NSSS system design

    International Nuclear Information System (INIS)

    Kim, Y. S.; Lee, S. L.

    2000-01-01

    Implementation of information technology system through the nuclear power plant life cycle which covers site selection, design, construction, operation and decommission has been suggested continually by the reports or guidelines from NIRMA, INPO, NUMARC, USNRC and EPRI since late 1980's, and some of it has been actually implemented and applied partially to the practical design process. However, for the NSSS system design, a high level activity of nuclear power plant design phase, none of the effects has been reported with regard to implementing the information system. In Korea, KAERI studied NuIDEAS(Nuclear Integrated Database and Design Advancement System) in 1995, and KAERI (Korea Electric Power Research Institute) worked with CENP (Combustion Engineering Nuclear Power) for KNGR IMS(Information Management System) in 1997 as trials to adopt information system for NSSS system design. In this paper, after reviewing the pre-studied two information system, we introduce implementation of the information system for NSSS system design which is compatible with the on-going design works and can be used as means of concurrent engineering through internet. With this electronic design system, we expect increase of the design efficiency and productivity by switching from hard copy based design flow to internet based system. In addition, reliability and traceability of the design data is highly elevated by containing the native document file together with all the review, comment and resolution history in one database

  7. Interference between PET and MRI sub-systems in a silicon-photomultiplier-based PET/MRI system

    International Nuclear Information System (INIS)

    Yamamoto, Seiichi; Watabe, Hiroshi; Kanai, Yasukazu; Hatazawa, Jun; Aoki, Masaaki; Sugiyama, Eiji; Watabe, Tadashi; Imaizumi, Masao; Shimosegawa, Eku

    2011-01-01

    The silicon-photomultiplier (Si-PM) is a promising photodetector, especially for integrated PET/MRI systems, due to its small size, high gain, and low sensitivity to static magnetic fields. The major problem using a Si-PM-based PET system within the MRI system is the interference between the PET and MRI units. We measured the interference by combining a Si-PM-based PET system with a permanent-magnet MRI system. When the RF signal-induced pulse height exceeded the lower energy threshold level of the PET system, interference between the Si-PM-based PET system and MRI system was detected. The prompt as well as the delayed coincidence count rates of the Si-PM-based PET system increased significantly. These noise counts produced severe artifacts on the reconstructed images of the Si-PM-based PET system. In terms of the effect of the Si-PM-based PET system on the MRI system, although no susceptibility artifact was observed on the MR images, electronic noise from the PET detector ring was detected by the RF coil and reduced the signal-to-noise ratio (S/N) of the MR images. The S/N degradation of the MR images was reduced when the distance between the RF coil and the Si-PM-based PET system was increased. We conclude that reducing the interference between the PET and MRI systems is essential for achieving the optimum performance of integrated Si-PM PET/MRI systems.

  8. Development of FPGA-based safety-related I and C systems

    Energy Technology Data Exchange (ETDEWEB)

    Goto, Y.; Oda, N.; Miyazaki, T.; Hayashi, T.; Sato, T.; Igawa, S. [08, Shinsugita-cho, Isogo-ku, Yokohama 235-8523 (Japan); 1, Toshiba-cho, Fuchu, Tokyo 183-8511 (Japan)

    2006-07-01

    Toshiba has developed Non-rewritable (NRW) Field Programmable Gate Array (FPGA)-based safety-related Instrumentation and Control (I and C) system [1]. Considering application to safety-related systems, nonvolatile and non-rewritable FPGA which is impossible to be changed after once manufactured has been adopted in Toshiba FPGA-based system. FPGA is a device which consists only of defined digital circuit: hardware, which performs defined processing. FPGA-based system solves issues existing both in the conventional systems operated by analog circuits (analog-based system) and the systems operated by central processing unit (CPU-based system). The advantages of applying FPGA are to keep the long-life supply of products, improving testability (verification), and to reduce the drift which may occur in analog-based system. The system which Toshiba developed this time is Power Range Monitor (PRM). Toshiba is planning to expand application of FPGA-based technology by adopting this development method to the other safety-related systems from now on. (authors)

  9. Occupancy-based illumination control of LED lighting systems

    NARCIS (Netherlands)

    Caicedo Fernandez, D.R.; Pandharipande, A.; Leus, G.

    2011-01-01

    Light emitting diode (LED)-based systems are considered to be the future of lighting. We consider the problem of energy-efficient illumination control of such systems. Energy-efficient system design is based on two aspects: localised information on occupancy and optimisation of dimming levels of the

  10. The COROT ground-based archive and access system

    Science.gov (United States)

    Solano, E.; González-Riestra, R.; Catala, C.; Baglin, A.

    2002-01-01

    A prototype of the COROT ground-based archive and access system is presented here. The system has been developed at LAEFF and it is based on the experience gained at Laboratorio de Astrofisica Espacial y Fisica Fundamental (LAEFF) with the INES (IUE Newly Extracted System) Archive.

  11. A Web-based Examination System Based on PHP+MySQL.

    Science.gov (United States)

    Wen, Ji; Zhang, Yang; Yan, Yong; Xia, Shunren

    2005-01-01

    The design and implementation of web-based examination system constructed by PHP and MySQL is presented in this paper. Three primary parts, including students',teachers' and administrators', are introduced and analyzed in detail. Initial application has demonstrated the system's feasibility and reasonability.*

  12. Neonatal Airway Obstruction from an Immature Teratoma: The ...

    African Journals Online (AJOL)

    1) Table of Contents (TOC) email alert. Receive an email alert containing the TOC when a new complete issue of the journal is made available online. To register for TOC alerts go to www.amhsr.org/signup.asp. 2) RSS feeds. Really Simple Syndication (RSS) helps you to get alerts on new publication right on your desktop ...

  13. Severe falciparum malaria associated with massive pulmonary ...

    African Journals Online (AJOL)

    1) Table of Contents (TOC) email alert. Receive an email alert containing the TOC when a new complete issue of the journal is made available online. To register for TOC alerts go to www.annalsafrmed.org/signup.asp. 2) RSS feeds. Really Simple Syndication (RSS) helps you to get alerts on new publication right on your ...

  14. Urinary 1-Hydroxypyrene Levels in Workers Exposed to Polycyclic Aromatic Hydrocarbon from Rubber Wood Burning

    Directory of Open Access Journals (Sweden)

    Thitiworn Choosong

    2014-06-01

    Conclusion: The urinary 1-OHP levels of workers exposed to PAHs were high. The accumulation of 1-OHP in the body was not clear although the workers had long working hours with few days off during their working experience. Therefore, a regular day off schedule and rotation shift work during high productive RSS should be set for RSS workers.

  15. Agent-based Modeling Methodology for Analyzing Weapons Systems

    Science.gov (United States)

    2015-03-26

    technique involve model structure, system representation and the degree of validity, coupled with the simplicity, of the overall model. ABM is best suited... system representation of the air combat system . We feel that a simulation model that combines ABM with equation-based representation of weapons and...AGENT-BASED MODELING METHODOLOGY FOR ANALYZING WEAPONS SYSTEMS THESIS Casey D. Connors, Major, USA

  16. RFID - based Staff Control System (SCS) in Kazakhstan

    Science.gov (United States)

    Saparkhojayev, N.

    2015-06-01

    RFID - based Staff Control System (SCS) will allow complete hands-free access control, monitoring the whereabouts of employee and record the attendance of the employee as well. Moreover, with a help of this system, it is possible to have a nice report at the end of the month and based on the total number of worked hours, the salary will be allocated to each personnel. The access tag can be read up to 10 centimeters from the RFID reader. The proposed system is based on UHF RFID readers, supported with antennas at gate and transaction sections, and employee identification cards containing RFID-transponders which are able to electronically store information that can be read / written even without the physical contact with the help of radio medium. This system is an innovative system, which describes the benefits of applying RFID- technology in the Education System process of Republic of Kazakhstan. This paper presents the experiments conducted to set up RFID based SCS.

  17. RFID - based Staff Control System (SCS) in Kazakhstan

    International Nuclear Information System (INIS)

    Saparkhojayev, N

    2015-01-01

    RFID - based Staff Control System (SCS) will allow complete hands-free access control, monitoring the whereabouts of employee and record the attendance of the employee as well. Moreover, with a help of this system, it is possible to have a nice report at the end of the month and based on the total number of worked hours, the salary will be allocated to each personnel. The access tag can be read up to 10 centimeters from the RFID reader. The proposed system is based on UHF RFID readers, supported with antennas at gate and transaction sections, and employee identification cards containing RFID-transponders which are able to electronically store information that can be read / written even without the physical contact with the help of radio medium. This system is an innovative system, which describes the benefits of applying RFID- technology in the Education System process of Republic of Kazakhstan. This paper presents the experiments conducted to set up RFID based SCS. (paper)

  18. Web-Based Learning Support System

    Science.gov (United States)

    Fan, Lisa

    Web-based learning support system offers many benefits over traditional learning environments and has become very popular. The Web is a powerful environment for distributing information and delivering knowledge to an increasingly wide and diverse audience. Typical Web-based learning environments, such as Web-CT, Blackboard, include course content delivery tools, quiz modules, grade reporting systems, assignment submission components, etc. They are powerful integrated learning management systems (LMS) that support a number of activities performed by teachers and students during the learning process [1]. However, students who study a course on the Internet tend to be more heterogeneously distributed than those found in a traditional classroom situation. In order to achieve optimal efficiency in a learning process, an individual learner needs his or her own personalized assistance. For a web-based open and dynamic learning environment, personalized support for learners becomes more important. This chapter demonstrates how to realize personalized learning support in dynamic and heterogeneous learning environments by utilizing Adaptive Web technologies. It focuses on course personalization in terms of contents and teaching materials that is according to each student's needs and capabilities. An example of using Rough Set to analyze student personal information to assist students with effective learning and predict student performance is presented.

  19. Contraction theory based adaptive synchronization of chaotic systems

    International Nuclear Information System (INIS)

    Sharma, B.B.; Kar, I.N.

    2009-01-01

    Contraction theory based stability analysis exploits the incremental behavior of trajectories of a system with respect to each other. Application of contraction theory provides an alternative way for stability analysis of nonlinear systems. This paper considers the design of a control law for synchronization of certain class of chaotic systems based on backstepping technique. The controller is selected so as to make the error dynamics between the two systems contracting. Synchronization problem with and without uncertainty in system parameters is discussed and necessary stability proofs are worked out using contraction theory. Suitable adaptation laws for unknown parameters are proposed based on the contraction principle. The numerical simulations verify the synchronization of the chaotic systems. Also parameter estimates converge to their true values with the proposed adaptation laws.

  20. Distributed Monitoring System Based on ICINGA

    CERN Multimedia

    Haen, C; Neufeld, N

    2011-01-01

    The LHCb online system relies on a large and heterogeneous I.T. infrastructure : it comprises more than 2000 servers and embedded systems and more than 200 network devices. While for the control and monitoring of detectors, PLCs, and readout boards an industry standard SCADA system PVSSII has been put in production, we use a low level monitoring system to monitor the control infrastructure itself. While our previous system was based on a single central NAGIOS server, our current system uses a distributed ICINGA infrastructure.

  1. Beam based systems and controls

    CERN Document Server

    Jacquet, D

    2012-01-01

    This presentation will give a review from the operations team of the performance and issues of the beam based systems, namely RF, ADT, beam instrumentation, controls and injection systems. For each of these systems, statistics on performance and availability will be presented with the main issues encountered in 2012. The possible improvements for operational efficiency and safety will be discussed, with an attempt to answer the question "Are we ready for the new challenges brought by the 25ns beam and increased energy after LSI? ".

  2. Bispectral index monitoring for conscious sedation in intervention: better, safer, faster

    Energy Technology Data Exchange (ETDEWEB)

    Bell, J.K.; Laasch, H.-U.; Wilbraham, L.; England, R.E.; Morris, J.A.; Martin, D.F. E-mail: derrick.martin@smtr.nhs.uk

    2004-12-01

    AIM: The aim of this study was to compare subjective (Ramsay sedation score, RSS) with objective electroencephalogram-based bispectral index (BIS) assessment, and to validate the appropriate BIS range for measurement of conscious sedation in interventional procedures. MATERIALS AND METHODS: One hundred patients undergoing sedo-analgesia (midazolam and fentanyl) for interventional gastrointestinal procedures were divided into two groups. In group A (n=30) sedation was guided by the RSS with the operator blinded to the BIS recording. In group B (n=70) the operator titrated intravenous sedation to maintain an optimal BIS, predetermined from the results in group A. Recovery time, procedure duration, physiological parameters and unplanned events were recorded in both groups. RESULTS: There was a significant correlation between the BIS and RSS (p<0.001). BIS values of 87.2 and 80.9 corresponded to an RSS of 3 and 4, respectively. The optimal BIS level was defined as 80-85. Fifty-seven point five percent of readings were within this range in group B compared with 26.5% in group A (p<0.001). Sedation approaching general anaesthesia (BIS<60) occurred in 5.5% of patients in group A but not in group B. Mean recovery time, duration of procedure, midazolam and fentanyl doses were significantly reduced in group B. Unplanned events were reduced from 27 to 17%, but this was not statistically significant (p=0.29). CONCLUSION: BIS monitoring enables more effective titration of sedatives to maintain a suitable level of consciousness, whilst reducing procedure time. The BIS offers an objective, safe and reliable measure of sedation, without disturbing either patient or operator. BIS monitoring raises the standard of patient care, and in our view, should be used to augment standard assessment.

  3. Bispectral index monitoring for conscious sedation in intervention: better, safer, faster

    International Nuclear Information System (INIS)

    Bell, J.K.; Laasch, H.-U.; Wilbraham, L.; England, R.E.; Morris, J.A.; Martin, D.F.

    2004-01-01

    AIM: The aim of this study was to compare subjective (Ramsay sedation score, RSS) with objective electroencephalogram-based bispectral index (BIS) assessment, and to validate the appropriate BIS range for measurement of conscious sedation in interventional procedures. MATERIALS AND METHODS: One hundred patients undergoing sedo-analgesia (midazolam and fentanyl) for interventional gastrointestinal procedures were divided into two groups. In group A (n=30) sedation was guided by the RSS with the operator blinded to the BIS recording. In group B (n=70) the operator titrated intravenous sedation to maintain an optimal BIS, predetermined from the results in group A. Recovery time, procedure duration, physiological parameters and unplanned events were recorded in both groups. RESULTS: There was a significant correlation between the BIS and RSS (p<0.001). BIS values of 87.2 and 80.9 corresponded to an RSS of 3 and 4, respectively. The optimal BIS level was defined as 80-85. Fifty-seven point five percent of readings were within this range in group B compared with 26.5% in group A (p<0.001). Sedation approaching general anaesthesia (BIS<60) occurred in 5.5% of patients in group A but not in group B. Mean recovery time, duration of procedure, midazolam and fentanyl doses were significantly reduced in group B. Unplanned events were reduced from 27 to 17%, but this was not statistically significant (p=0.29). CONCLUSION: BIS monitoring enables more effective titration of sedatives to maintain a suitable level of consciousness, whilst reducing procedure time. The BIS offers an objective, safe and reliable measure of sedation, without disturbing either patient or operator. BIS monitoring raises the standard of patient care, and in our view, should be used to augment standard assessment

  4. Radon concentrations in different types of dwellings in Israel

    International Nuclear Information System (INIS)

    Epstein, L.; Koch, J.; Riemer, T.; Haquin, G.; Orion, I.

    2014-01-01

    The average radon concentration in Israeli dwellings was assessed by combining the results of a 2006 radon survey in single family houses with the results of a 2011 radon survey in apartments of multi-storey buildings. Both surveys were based on long-term measurements using CR-39 detectors. The survey in multi-storey buildings was intended to assess the influence of recent practices in the local building industry on the radon concentrations. These practices include the use of building materials with higher concentrations of the natural radionuclides in the last 20 y than before, as well as the improvement in sealing techniques over that period. Another practice in place since the early 1990's is the building of a shielded area in every apartment that is known as an RSS (residential secure space). The RSS is a room built from massive concrete walls, floor and ceiling that can be hermetically sealed and is intended to protect its residents from a missile attack. The influence of the above-mentioned features on radon concentrations was estimated by dividing the participating apartments into two groups: apartments in buildings >20 y, built using building materials with low concentrations of the natural radionuclides, regular sealing and without an RSS and apartments in buildings newer than 10 y, built using building materials with higher concentrations of the natural radionuclides, improved sealing and including an RSS. It was found that the average radon concentration in apartments in new buildings was significantly higher than in old buildings and the average radon concentration in single-family houses was significantly higher than in apartments in multi-storey buildings. Doses due to indoor radon were estimated on the basis of the updated information included in the 2009 International Commission on Radiological Protection statement on radon. (authors)

  5. System Dynamics as Model-Based Theory Building

    OpenAIRE

    Schwaninger, Markus; Grösser, Stefan N.

    2008-01-01

    This paper introduces model-based theory building as a feature of system dynamics (SD) with large potential. It presents a systemic approach to actualizing that potential, thereby opening up a new perspective on theory building in the social sciences. The question addressed is if and how SD enables the construction of high-quality theories. This contribution is based on field experiment type projects which have been focused on model-based theory building, specifically the construction of a mi...

  6. The sound bases of systemic silviculture

    Directory of Open Access Journals (Sweden)

    Nocentini S

    2009-11-01

    Full Text Available Following recent critiques on systemic silviculture, the author examines the principles, scientific consequences and practical implications of this theory. Systemic silviculture is based on the assumption that the forest is a complex biological system. This means abandoning the reductive, mechanistic and deterministic paradigm that has characterized forest science until the last century. If the forest is a complex biological system then its properties cannot be reduced to those of its components. According to this assumption, the author analyzes the concepts of forest structure, predictability and unpredictability of forest ecosystem processes, intrinsic value and rights of the forest. Systemic silviculture is characterized by an adaptive approach which has the flexibility and the capacity to respond to environmental retroactions which are fundamental for the governance of complex and adaptive systems. The author concludes that the bases of systemic silviculture are unassailable and surely much sounder than those of “naturalistic” silviculture, or at least of that type of silviculture which, trying to define “natural structural models” for forest ecosystems, is still anchored to the old, classic, paradigm of natural resource management and conservation.

  7. DEVS representation of dynamical systems - Event-based intelligent control. [Discrete Event System Specification

    Science.gov (United States)

    Zeigler, Bernard P.

    1989-01-01

    It is shown how systems can be advantageously represented as discrete-event models by using DEVS (discrete-event system specification), a set-theoretic formalism. Such DEVS models provide a basis for the design of event-based logic control. In this control paradigm, the controller expects to receive confirming sensor responses to its control commands within definite time windows determined by its DEVS model of the system under control. The event-based contral paradigm is applied in advanced robotic and intelligent automation, showing how classical process control can be readily interfaced with rule-based symbolic reasoning systems.

  8. Chicken astrovirus as an aetiological agent of runting-stunting syndrome in broiler chickens.

    Science.gov (United States)

    Kang, Kyung-Il; Linnemann, Erich; Icard, Alan H; Durairaj, Vijay; Mundt, Egbert; Sellers, Holly S

    2018-04-01

    Despite descriptions of runting-stunting syndrome (RSS) in broiler chickens dating back over 40 years, the aetiology has not yet been described. A novel chicken astrovirus (CkAstV) was isolated in an LMH liver cell line from the intestines of chickens affected with RSS. Clinical RSS is characterized by retarded growth and cystic crypt lesions in the small intestine. In 1-day-old broiler chickens infected with the CkAstV isolate, virus was only detected in the intestinal epithelial cells during the first few days after infection. Notably, the preferred host cells are the crypt epithelial cells following initial replication in the villous epithelial cells, thus implying viral preference for immature intestinal cells. Nevertheless, the CkAstV isolate did not induce remarkable pathological changes, despite the presence of the virus in situ. Serial chicken-to-chicken passages of the virus induced increased virulence, as displayed by decreased weight gain and the presence of cystic lesions in the small intestine reproducing clinical RSS in chickens. The analysis of the full-length genome sequences from the isolated CkAstV and the CkAstV from the bird-to-bird passages showed >99 % similarity. The data obtained in this study suggest that the CkAstV isolate is capable of inducing RSS following serial bird-to-bird passages in broilers and is as an aetiological agent of the disease.

  9. Model based control of refrigeration systems

    Energy Technology Data Exchange (ETDEWEB)

    Sloth Larsen, L.F.

    2005-11-15

    The subject for this Ph.D. thesis is model based control of refrigeration systems. Model based control covers a variety of different types of controls, that incorporates mathematical models. In this thesis the main subject therefore has been restricted to deal with system optimizing control. The optimizing control is divided into two layers, where the system oriented top layers deals with set-point optimizing control and the lower layer deals with dynamical optimizing control in the subsystems. The thesis has two main contributions, i.e. a novel approach for set-point optimization and a novel approach for desynchronization based on dynamical optimization. The focus in the development of the proposed set-point optimizing control has been on deriving a simple and general method, that with ease can be applied on various compositions of the same class of systems, such as refrigeration systems. The method is based on a set of parameter depended static equations describing the considered process. By adapting the parameters to the given process, predict the steady state and computing a steady state gradient of the cost function, the process can be driven continuously towards zero gradient, i.e. the optimum (if the cost function is convex). The method furthermore deals with system constrains by introducing barrier functions, hereby the best possible performance taking the given constrains in to account can be obtained, e.g. under extreme operational conditions. The proposed method has been applied on a test refrigeration system, placed at Aalborg University, for minimization of the energy consumption. Here it was proved that by using general static parameter depended system equations it was possible drive the set-points close to the optimum and thus reduce the power consumption with up to 20%. In the dynamical optimizing layer the idea is to optimize the operation of the subsystem or the groupings of subsystems, that limits the obtainable system performance. In systems

  10. Power system stabilizers based on modern control techniques

    Energy Technology Data Exchange (ETDEWEB)

    Malik, O P; Chen, G P; Zhang, Y; El-Metwally, K [Calgary Univ., AB (Canada). Dept. of Electrical and Computer Engineering

    1994-12-31

    Developments in digital technology have made it feasible to develop and implement improved controllers based on sophisticated control techniques. Power system stabilizers based on adaptive control, fuzzy logic and artificial networks are being developed. Each of these control techniques possesses unique features and strengths. In this paper, the relative performance of power systems stabilizers based on adaptive control, fuzzy logic and neural network, both in simulation studies and real time tests on a physical model of a power system, is presented and compared to that of a fixed parameter conventional power system stabilizer. (author) 16 refs., 45 figs., 3 tabs.

  11. Computer-Based Wireless Advertising Communication System

    Directory of Open Access Journals (Sweden)

    Anwar Al-Mofleh

    2009-10-01

    Full Text Available In this paper we developed a computer based wireless advertising communication system (CBWACS that enables the user to advertise whatever he wants from his own office to the screen in front of the customer via wireless communication system. This system consists of two PIC microcontrollers, transmitter, receiver, LCD, serial cable and antenna. The main advantages of the system are: the wireless structure and the system is less susceptible to noise and other interferences because it uses digital communication techniques.

  12. Astra data base server: system specifications

    OpenAIRE

    Abba, Laura; Cecaloni, Patrizia; Romano, Giuseppe Alberto; Vannozzi, Daniele

    1990-01-01

    We describe a system intended to access databases distributed on EARN network. Thus system has been developed at CNUCE by the ASTRA project team. The service started, in test mode, january 1, 1989. The first version accessed the IBM study contracts database and other italian databases located on the EARN network. The databases were managed an IBM information retrieval system of IBM named STAIRS/CMS. Afterwards we deciced to interface some other I.R.S systems and a DataBase Management system b...

  13. Contribution of V(H replacement products in mouse antibody repertoire.

    Directory of Open Access Journals (Sweden)

    Lin Huang

    Full Text Available VH replacement occurs through RAG-mediated recombination between the cryptic recombination signal sequence (cRSS near the 3' end of a rearranged VH gene and the 23-bp RSS from an upstream unrearranged VH gene. Due to the location of the cRSS, VH replacement leaves a short stretch of nucleotides from the previously rearranged VH gene at the newly formed V-D junction, which can be used as a marker to identify VH replacement products. To determine the contribution of VH replacement products to mouse antibody repertoire, we developed a Java-based VH Replacement Footprint Analyzer (VHRFA program and analyzed 17,179 mouse IgH gene sequences from the NCBI database to identify VH replacement products. The overall frequency of VH replacement products in these IgH genes is 5.29% based on the identification of pentameric VH replacement footprints at their V-D junctions. The identified VH replacement products are distributed similarly in IgH genes using most families of VH genes, although different families of VH genes are used differentially. The frequencies of VH replacement products are significantly elevated in IgH genes derived from several strains of autoimmune prone mice and in IgH genes encoding autoantibodies. Moreover, the identified VH replacement footprints in IgH genes from autoimmune prone mice or IgH genes encoding autoantibodies preferentially encode positively charged amino acids. These results revealed a significant contribution of VH replacement products to the diversification of antibody repertoire and potentially, to the generation of autoantibodies in mice.

  14. Self-esteem recognition based on gait pattern using Kinect.

    Science.gov (United States)

    Sun, Bingli; Zhang, Zhan; Liu, Xingyun; Hu, Bin; Zhu, Tingshao

    2017-10-01

    Self-esteem is an important aspect of individual's mental health. When subjects are not able to complete self-report questionnaire, behavioral assessment will be a good supplement. In this paper, we propose to use gait data collected by Kinect as an indicator to recognize self-esteem. 178 graduate students without disabilities participate in our study. Firstly, all participants complete the 10-item Rosenberg Self-Esteem Scale (RSS) to acquire self-esteem score. After completing the RRS, each participant walks for two minutes naturally on a rectangular red carpet, and the gait data are recorded using Kinect sensor. After data preprocessing, we extract a few behavioral features to train predicting model by machine learning. Based on these features, we build predicting models to recognize self-esteem. For self-esteem prediction, the best correlation coefficient between predicted score and self-report score is 0.45 (pself-esteem with a fairly good criterion validity. The gait predicting model can be taken as a good supplementary method to measure self-esteem. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Automatic Laser Pointer Detection Algorithm for Environment Control Device Systems Based on Template Matching and Genetic Tuning of Fuzzy Rule-Based Systems

    Directory of Open Access Journals (Sweden)

    F.

    2012-04-01

    Full Text Available In this paper we propose a new approach for laser-based environment device control systems based on the automatic design of a Fuzzy Rule-Based System for laser pointer detection. The idea is to improve the success rate of the previous approaches decreasing as much as possible the false offs and increasing the success rate in images with laser spot, i.e., the detection of a false laser spot (since this could lead to dangerous situations. To this end, we propose to analyze both, the morphology and color of a laser spot image together, thus developing a new robust algorithm. Genetic Fuzzy Systems have also been employed to improve the laser spot system detection by means of a fine tuning of the involved membership functions thus reducing the system false offs, which is the main objective in this problem. The system presented in this paper, makes use of a Fuzzy Rule-Based System adjusted by a Genetic Algorithm, which, based on laser morphology and color analysis, shows a better success rate than previous approaches.

  16. Preprint data base system at INS: INSPREP system

    International Nuclear Information System (INIS)

    Shinohara, M.; Ukai, K.; Fujiyoshi, N.

    1988-02-01

    The library at the INS (Institute for Nuclear Study) receives several tens of preprints a week from foreign and domestic laboratories and universities. These preprints are pigeonholed by making a catalog card index carried a title, authors, an accession number, classification of fields, etc. A newly arrived preprint lists is also served every week. The cataloging and weekly lists publishing works were handled with a typewriter. And then, it was very difficult and tedious to correct/check/file the index cards and to correct/check the weekly preprint lists. To make a preprint data efficiently by a computer and to refer this data base by on-line without using a index card, the INSPREP system is constructed. The INSPREP system consists of two parts. One is named a PREPINS, and is used to make a preprint data, builds a preprint data base, and publishes a weekly preprint lists. The other, called a PREP, performs an on-line retrieval for this data base. The preprint data base consists of following items such as an author, a title, an accession number, a report number, a classification field, etc. The PREPINS can be used by limited persons for security. User can search a preprint by inputting above mentioned items. The PREP adopts a menu method. Then, user can perform an on-line retrieval very easily. (author)

  17. K-Based Help desk System

    International Nuclear Information System (INIS)

    Mohamad Safuan Sulaiman; Abdul Muin Abdul Rahman; Norzalina Nasirudin; Khairiel Adyani Abdul Ghani

    2011-01-01

    K-based Help desk system is a knowledge oriented web based system that provides support to technical service providers in order to improve delivery of their services. It is a multi-centric system which focuses not only on end-users but the various levels of technical support services as well as the management through the utilization of knowledge which resides and grows within the system. Though providing user friendly system and capturing technical knowledge to improve efficiencies are the main objectives of this system, educating users with technical information through the knowledge utilization system are the spin-off target from this implementation. This is achieved by preventing the service providers from handling repetitive complaints which may have similarity in nature. Once a complaint has been resolved, the system captures the solution as an item in the knowledge database. The captured knowledge will then enable service requesters or users to get some ideas regarding their complaints from information or knowledge of other similar complaints besides providing relevant knowledge to the service provider such as the techniques used in solving problems and the performance among the technical support staffs. As for the management, this system helps in the decision making process in which the statistics features provide some knowledge on the number of equipment that frequently and consistently failed. This then leads to some understanding of the equipment that may create lost to the organization in terms of time and money. This system has been tested and implemented in IT Center (IT) and Engineering Division (BKJ) and is at the initial process of implementation in the Instrumentation and Automation Center (IAC) at Malaysian Nuclear Agency (Nuclear Malaysia). The system has helped in achieving a higher level of user satisfaction and a faster growth in technical knowledge repository that will serve as the institutional memory of Nuclear Malaysia and this will be

  18. Development of a tool for knowledge base verification of expert system based on Design/CPN

    International Nuclear Information System (INIS)

    Kim, Jong Hyun

    1998-02-01

    Verification is a necessary work in developing a reliable expert system. Verification is a process aimed at demonstrating whether a system meets it's specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base. Generally, verification process requires computational support by automated tools. For this reason, this study developed a tool for knowledge base verification based on Design/CPN, which is a tool for editing, modeling, and simulating Colored Petri net. This tool uses Enhanced Colored Petri net as a modeling method. By applying this tool to the knowledge base of nuclear power plant, it is noticed that it can successfully check most of the anomalies that can occur in a knowledge base

  19. SSDL personel dosimetry system: migration from a client - server system into a web-based system

    International Nuclear Information System (INIS)

    Maizura Ibrahim; Rosnah Shariff; Ahmad Bazlie Abdul Kadir; John Konsoh Sangau; Mohd Amin Sharifuldin Salleh; Taiman Kadni; Noriah Mod Ali

    2007-01-01

    Personnel Dosimetry System has been used by the Secondary Standard Dosimetry Laboratory (SSDL), Nuclear Malaysia since ten years ago. The system is a computerized database system with a client-server concept. This system has been used by Film Badge Laboratory, SSDL to record details of clients, calculation of Film Badge dosage, management of radiation workers data's, generating of dosage report, retrieval of statistical reports regarding film badge usage for the purpose of reporting to monitoring bodies such as Atomic Energy Licensing Board (AELB), Ministry of Health and others. But, due to technical problems that frequently occurs, the system is going to be replaced by a newly developed web- based system called e-SSDL. This paper describe the problems that regularly occurs in the previous system, explains how the process of replacing the client-server system with a web-based system is done and the differences between the previous and current system. This paper will also present details architecture of the new system and the new process introduced in processing film badges. (Author)

  20. A super base station based centralized network architecture for 5G mobile communication systems

    Directory of Open Access Journals (Sweden)

    Manli Qian

    2015-04-01

    Full Text Available To meet the ever increasing mobile data traffic demand, the mobile operators are deploying a heterogeneous network with multiple access technologies and more and more base stations to increase the network coverage and capacity. However, the base stations are isolated from each other, so different types of radio resources and hardware resources cannot be shared and allocated within the overall network in a cooperative way. The mobile operators are thus facing increasing network operational expenses and a high system power consumption. In this paper, a centralized radio access network architecture, referred to as the super base station (super BS, is proposed, as a possible solution for an energy-efficient fifth-generation (5G mobile system. The super base station decouples the logical functions and physical entities of traditional base stations, so different types of system resources can be horizontally shared and statistically multiplexed among all the virtual base stations throughout the entire system. The system framework and main functionalities of the super BS are described. Some key technologies for system implementation, i.e., the resource pooling, real-time virtualization, adaptive hardware resource allocation are also highlighted.

  1. Web-based Project Reporting System

    Data.gov (United States)

    US Agency for International Development — Web-PRS is a web-based system that captures financial information and project status information that is sortable by geographical location, pillar, project type and...

  2. An Artificial Intelligence-Based Environment Quality Analysis System

    OpenAIRE

    Oprea , Mihaela; Iliadis , Lazaros

    2011-01-01

    Part 20: Informatics and Intelligent Systems Applications for Quality of Life information Services (ISQLIS) Workshop; International audience; The paper describes an environment quality analysis system based on a combination of some artificial intelligence techniques, artificial neural networks and rule-based expert systems. Two case studies of the system use are discussed: air pollution analysis and flood forecasting with their impact on the environment and on the population health. The syste...

  3. Accurate radiotherapy positioning system investigation based on video

    International Nuclear Information System (INIS)

    Tao Shengxiang; Wu Yican

    2006-01-01

    This paper introduces the newest research production on patient positioning method in accurate radiotherapy brought by Accurate Radiotherapy Treating System (ARTS) research team of Institute of Plasma Physics of Chinese Academy of Sciences, such as the positioning system based on binocular vision, the position-measuring system based on contour matching and the breath gate controlling system for positioning. Their basic principle, the application occasion and the prospects are briefly depicted. (authors)

  4. Screening of tomato varieties for fruit tree based Agroforestry system

    Directory of Open Access Journals (Sweden)

    J. Hossain

    2014-12-01

    Full Text Available An experiment was conducted with four tomato varieties under a six year old orchard was accomplished at the Bangabandhu Sheikh Mujibur Rahman Agricultural University (BSMRAU research farm during October 2011 to April 2012. The experiment was laid out in a Randomized Complete Block Design with three replications. Four tomato varieties (BARI Tomato 2, BARI Tomato 8, BARI Tomato 14 and BARI Tomato 15 were grown under guava, mango, olive and control. Results showed that light availability in control plot (999.75 μ mol m-2s-1 was remarkably higher over fruit tree based agroforestry systems and it was 58.8, 43.9 and 31.5% of the control for guava, mango and olive based systems, respectively. The shortest tomato plant was observed in olive based system (54.91 cm, while the tallest plant was observed in mango based system (60.09 cm. The highest SPAD value and number of primary branches per plant was recorded in control plot. Fruit length, fruit girth was found lowest in olive based system. The highest yield (34.06 t ha-1 was recorded in control plot while the lowest yield (10.26 t ha-1 was recorded in olive based system. The economic performance of fruit tree based tomato production system showed that both the net return and BCR of mango and guava based system was higher over control and olive based system. The contents of organic carbon, nitrogen, available phosphorus, potassium and sulfur of before experimentation soil were slightly higher in fruit tree based agroforestry systems than the control. After experimentation, nutrient elements in soil were found increased slightly than initial soils. Fruit tree based agroforestry systems could be ranked based on the economic performance as mango> guava> control> olive based system with BARI Tomato 15, BARI Tomato 2, BARI Tomato 14 and BARI Tomato 8, respectively.

  5. End user interface and knowledge base editing system of CSPAR: a knowledge-based consultation system for preventive maintenance in nuclear plants

    International Nuclear Information System (INIS)

    Sinohara, Yasusi; Terano, Takao; Nishiyama, Takuya

    1988-01-01

    Consultation System for Prevention of Abnormal-event Recurrence (CSPAR) is a knowledge-based system to analyze the same kind of events to a given fault reported on a nuclear power plant and to give users some informations for effective measures preventing them. This report discusses the interfaces of CSPAR for both end-users and knowledge-base editors. The interfaces are highly interactive and multi-window oriented. The features are as follows: (1) The end-user interfaces has Japanese language processing facility, which enables the users to consult CSPAR with various synonims and related terms for knowledge-base handling; (2) The knowledge-base editing system is used by knowledge-base editors for maintaining the knowledge on both plants' equipments and abnormal events sequences. It has facilities for easy maintenance of knowledge-bases, which includes a graphic oriented browser, a knowledge-base retriever, and a knowledge-base checker. (author)

  6. 78 FR 18252 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

    Science.gov (United States)

    2013-03-26

    ...-AM78 Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System... applicable sections. The Federal Prevailing Rate Advisory Committee, the national labor- management committee... proposing to amend 5 CFR part 532 as follows: PART 532--PREVAILING RATE SYSTEMS 0 1. The authority citation...

  7. An USB-based time measurement system

    International Nuclear Information System (INIS)

    Qin Xi; Liu Shubin; An Qi

    2010-01-01

    In this paper,we report the electronics of a timing measurement system of PTB(portable TDC board), which is a handy tool based on USB interface, customized for high precision time measurements without any crates. The time digitization is based on the High Performance TDC Chip (HPTDC). The real-time compensation for HPTDC outputs and the USB master logic are implemented in an ALTERA's Cyclone FPGA. The architecture design and logic design are described in detail. Test of the system showed a time resolution of 13.3 ps. (authors)

  8. Dynamic Control Based Photovoltaic Illuminating System

    Directory of Open Access Journals (Sweden)

    Zhang Chengkai

    2016-01-01

    Full Text Available Smart LED illumination system can use the power from whether the photovoltaic cell or the power grid automatically based on the SOC (State Of Charge of the photovoltaic cell. This paper proposes a feedback control of the photovoltaic cells and a dynamic control strategy for the Energy system. The dynamic control strategy is used to determine the switching state of the photovoltaic cell based on the illumination load in the past one hour and the battery capacity. These controls are manifested by experimental prototype that the control scheme is correct and effective.

  9. Optimization of the Case Based Reasoning Systems

    International Nuclear Information System (INIS)

    Mohamed, A.H.

    2014-01-01

    Intrusion Detection System (IDS) have a great importance in saving the authority of the information widely spread all over the world through the networks. Many Case Based Systems concerned on the different methods of the unauthorized users/hackers that face the developers of the IDS. The proposed system introduces a new hybrid system that uses the genetic algorithm to optimize an IDS - case based system. It can detect the new anomalies appeared through the network and use the cases in the case library to determine the suitable solution for their behavior. The suggested system can solve the problem either by using an old identical solution or adapt the optimum one till have the targeted solution. The proposed system has been applied to block unauthorized users / hackers from attach the medical images for radiotherapy of the cancer diseases during their transmission through web. The proposed system can prove its accepted performance in this manner

  10. Network-Aware DHT-Based P2P Systems

    Science.gov (United States)

    Fayçal, Marguerite; Serhrouchni, Ahmed

    P2P networks lay over existing IP networks and infrastructure. This chapter investigates the relation between both layers, details the motivations for network awareness in P2P systems, and elucidates the requirements P2P systems have to meet for efficient network awareness. Since new P2P systems are mostly based on DHTs, we also present and analyse DHT-based architectures. And after a brief presentation of different existing network-awareness solutions, the chapter goes on effective cooperation between P2P traffic and network providers' business agreements, and introduces emerging DHT-based P2P systems that are network aware through a semantic defined for resource sharing. These new systems ensure also a certain context-awareness. So, they are analyzed and compared before an open end on prospects of network awareness in P2P systems.

  11. A novel AIDS/HIV intelligent medical consulting system based on expert systems.

    Science.gov (United States)

    Ebrahimi, Alireza Pour; Toloui Ashlaghi, Abbas; Mahdavy Rad, Maryam

    2013-01-01

    The purpose of this paper is to propose a novel intelligent model for AIDS/HIV data based on expert system and using it for developing an intelligent medical consulting system for AIDS/HIV. In this descriptive research, 752 frequently asked questions (FAQs) about AIDS/HIV are gathered from numerous websites about this disease. To perform the data mining and extracting the intelligent model, the 6 stages of Crisp method has been completed for FAQs. The 6 stages include: Business understanding, data understanding, data preparation, modelling, evaluation and deployment. C5.0 Tree classification algorithm is used for modelling. Also, rational unified process (RUP) is used to develop the web-based medical consulting software. Stages of RUP are as follows: Inception, elaboration, construction and transition. The intelligent developed model has been used in the infrastructure of the software and based on client's inquiry and keywords related FAQs are displayed to the client, according to the rank. FAQs' ranks are gradually determined considering clients reading it. Based on displayed FAQs, test and entertainment links are also displayed. The accuracy of the AIDS/HIV intelligent web-based medical consulting system is estimated to be 78.76%. AIDS/HIV medical consulting systems have been developed using intelligent infrastructure. Being equipped with an intelligent model, providing consulting services on systematic textual data and providing side services based on client's activities causes the implemented system to be unique. The research has been approved by Iranian Ministry of Health and Medical Education for being practical.

  12. Adoption of Library 2.0 Functionalities by Academic Libraries and Users: A Knowledge Management Perspective

    Science.gov (United States)

    Kim, Yong-Mi; Abbas, June

    2010-01-01

    This study investigates the adoption of Library 2.0 functionalities by academic libraries and users through a knowledge management perspective. Based on randomly selected 230 academic library Web sites and 184 users, the authors found RSS and blogs are widely adopted by academic libraries while users widely utilized the bookmark function.…

  13. Search Results | Page 56 | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2008-01-01

    Results 551 - 560 of 8490 ... Towards Evidence Based ICT Policy: Access & Usage in 17 African Countries. Published date. January 1, 2008 ... Copyright · Open access policy · Privacy policy · Research ethics · Transparency · Website usage. Follow us; Facebook · Twitter · Youtube · Linked In · RSS Feed. © 2016 IDRC.

  14. Synchronous message-based communication for distributed heterogeneous systems

    International Nuclear Information System (INIS)

    Wilkinson, N.; Dohan, D.

    1992-01-01

    The use of a synchronous, message-based real-time operating system (Unison) as the basis of transparent interprocess and inter-processor communication over VME-bus is described. The implementation of a synchronous, message-based protocol for network communication between heterogeneous systems is discussed. In particular, the design and implementation of a message-based session layer over a virtual circuit transport layer protocol using UDP/IP is described. Inter-process communication is achieved via a message-based semantic which is portable by virtue of its ease of implementation in other operating system environments. Protocol performance for network communication among heterogeneous architecture is presented, including VMS, Unix, Mach and Unison. (author)

  15. Development of a Web-based financial application System

    Science.gov (United States)

    Hasan, M. R.; Ibrahimy, M. I.; Motakabber, S. M. A.; Ferdaus, M. M.; Khan, M. N. H.; Mostafa, M. G.

    2013-12-01

    The paper describes a technique to develop a web based financial system, following latest technology and business needs. In the development of web based application, the user friendliness and technology both are very important. It is used ASP .NET MVC 4 platform and SQL 2008 server for development of web based financial system. It shows the technique for the entry system and report monitoring of the application is user friendly. This paper also highlights the critical situations of development, which will help to develop the quality product.

  16. Bayero Journal of Pure and Applied Sciences - Vol 10, No 2 (2017)

    African Journals Online (AJOL)

    for Researchers · for Journals · for Authors · for Policy Makers · about Open Access · Journal Quality. Current Issue Atom logo · RSS2 logo · RSS1 logo. 521 African Journals. Browse By Category · Browse Alphabetically · Browse By Country · List All Titles · Free To Read Titles This Journal is Open Access. Featuring journals

  17. Archives: Innovation

    African Journals Online (AJOL)

    Items 1 - 24 of 24 ... for Researchers · for Journals · for Authors · for Policy Makers · about Open Access · Journal Quality. Current Issue Atom logo · RSS2 logo · RSS1 logo. 521 African Journals. Browse By Category · Browse Alphabetically · Browse By Country · List All Titles · Free To Read Titles This Journal is Open Access.

  18. Performance Based Failure Criteria of the Base Isolation System for Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kim, Jung Han; Kim, Min Kyu; Choi, In Kil

    2013-01-01

    The realistic approach to evaluate the failure state of the base isolation system is necessary. From this point of view, several concerns are reviewed and discussed in this study. This is the preliminary study for the performance based risk assessment of a base isolated nuclear power plant. The items to evaluate the capacity and response of an individual base isolator and a base isolation system were briefly outlined. However, the methodology to evaluate the realistic fragility of a base isolation system still needs to be specified. For the quantification of the seismic risk for a nuclear power plant structure, the failure probabilities of the structural component for the various seismic intensity levels need to be calculated. The failure probability is evaluated as the probability when the seismic response of a structure exceeds the failure criteria. Accordingly, the failure mode of the structural system caused by an earthquake vibration should be defined first. The type of a base isolator appropriate for a nuclear power plant structure is regarded as an elastometric rubber bearing with a lead core. The failure limit of the lead-rubber bearing (LRB) is not easy to be predicted because of its high nonlinearity and a complex loading condition by an earthquake excitation. Furthermore, the failure mode of the LRB system installed below the nuclear island cannot be simply determined because the basemat can be sufficiently supported if the number of damaged isolator is not much

  19. Fuzzy Logic Based Autonomous Traffic Control System

    Directory of Open Access Journals (Sweden)

    Muhammad ABBAS

    2012-01-01

    Full Text Available The aim of this paper is to design and implement fuzzy logic based traffic light Control system to solve the traffic congestion issues. In this system four input parameters: Arrival, Queue, Pedestrian and Emergency Vehicle and two output parameters: Extension in Green and Pedestrian Signals are used. Using Fuzzy Rule Base, the system extends or terminates the Green Signal according to the Traffic situation at the junction. On the presence of emergency vehicle, the system decides which signal(s should be red and how much an extension should be given to Green Signal for Emergency Vehicle. The system also monitors the density of people and makes decisions accordingly. In order to verify the proposed design algorithm MATLAB simulation is adopted and results obtained show concurrency to the calculated values according to the Mamdani Model of the Fuzzy Control System.

  20. Zope based electronic operation log system - Zlog

    International Nuclear Information System (INIS)

    Yoshii, K.; Satoh, Y.; Kitabayashi, T.

    2004-01-01

    Since January 2004, the Zope based electronic operation logging system, named Zlog, has been running at the KEKB and AR accelerator facilities. Since Zope is the python based open source web application server software and python language is familiar for the members in the KEKB accelerator control group, we have developed the Zlog system rapidly. In this paper, we report the development history and the present status of Zlog system. Also we show some general plug-in components, called Zope products, have been useful for our Zlog development. (author)

  1. Sensor-based material tagging system

    International Nuclear Information System (INIS)

    Vercellotti, L.C.; Cox, R.W.; Ravas, R.J.; Schlotterer, J.C.

    1991-01-01

    Electronic identification tags are being developed for tracking material and personnel. In applying electronic identification tags to radioactive materials safeguards, it is important to measure attributes of the material to ensure that the tag remains with the material. The addition of a microcontroller with an on-board analog-to-digital converter to an electronic identification tag application-specific integrated-circuit has been demonstrated as means to provide the tag with sensor data. Each tag is assembled into a housing, which serves as a scale for measuring the weight of a paint-can-sized container and its contents. Temperature rise of the can above ambient is also measured, and a piezoelectric detector detects disturbances and immediately puts the tag into its alarm and beacon mode. Radiation measurement was also considered, but the background from nearby containers was found to be excessive. The sensor-based tagging system allows tracking of the material in cans as it is stored in vaults or is moved through the manufacturing process. The paper presents details of the sensor-based material tagging system and describes a demonstration system

  2. Model-Based Requirements Management in Gear Systems Design Based On Graph-Based Design Languages

    Directory of Open Access Journals (Sweden)

    Kevin Holder

    2017-10-01

    Full Text Available For several decades, a wide-spread consensus concerning the enormous importance of an in-depth clarification of the specifications of a product has been observed. A weak clarification of specifications is repeatedly listed as a main cause for the failure of product development projects. Requirements, which can be defined as the purpose, goals, constraints, and criteria associated with a product development project, play a central role in the clarification of specifications. The collection of activities which ensure that requirements are identified, documented, maintained, communicated, and traced throughout the life cycle of a system, product, or service can be referred to as “requirements engineering”. These activities can be supported by a collection and combination of strategies, methods, and tools which are appropriate for the clarification of specifications. Numerous publications describe the strategy and the components of requirements management. Furthermore, recent research investigates its industrial application. Simultaneously, promising developments of graph-based design languages for a holistic digital representation of the product life cycle are presented. Current developments realize graph-based languages by the diagrams of the Unified Modelling Language (UML, and allow the automatic generation and evaluation of multiple product variants. The research presented in this paper seeks to present a method in order to combine the advantages of a conscious requirements management process and graph-based design languages. Consequently, the main objective of this paper is the investigation of a model-based integration of requirements in a product development process by means of graph-based design languages. The research method is based on an in-depth analysis of an exemplary industrial product development, a gear system for so-called “Electrical Multiple Units” (EMU. Important requirements were abstracted from a gear system

  3. Analysis, Simulation, and Verification of Knowledge-Based, Rule-Based, and Expert Systems

    Science.gov (United States)

    Hinchey, Mike; Rash, James; Erickson, John; Gracanin, Denis; Rouff, Chris

    2010-01-01

    Mathematically sound techniques are used to view a knowledge-based system (KBS) as a set of processes executing in parallel and being enabled in response to specific rules being fired. The set of processes can be manipulated, examined, analyzed, and used in a simulation. The tool that embodies this technology may warn developers of errors in their rules, but may also highlight rules (or sets of rules) in the system that are underspecified (or overspecified) and need to be corrected for the KBS to operate as intended. The rules embodied in a KBS specify the allowed situations, events, and/or results of the system they describe. In that sense, they provide a very abstract specification of a system. The system is implemented through the combination of the system specification together with an appropriate inference engine, independent of the algorithm used in that inference engine. Viewing the rule base as a major component of the specification, and choosing an appropriate specification notation to represent it, reveals how additional power can be derived from an approach to the knowledge-base system that involves analysis, simulation, and verification. This innovative approach requires no special knowledge of the rules, and allows a general approach where standardized analysis, verification, simulation, and model checking techniques can be applied to the KBS.

  4. Adaptive Sensing Based on Profiles for Sensor Systems

    Directory of Open Access Journals (Sweden)

    Yoshiteru Ishida

    2009-10-01

    Full Text Available This paper proposes a profile-based sensing framework for adaptive sensor systems based on models that relate possibly heterogeneous sensor data and profiles generated by the models to detect events. With these concepts, three phases for building the sensor systems are extracted from two examples: a combustion control sensor system for an automobile engine, and a sensor system for home security. The three phases are: modeling, profiling, and managing trade-offs. Designing and building a sensor system involves mapping the signals to a model to achieve a given mission.

  5. A LabVIEWTM-based detector testing system

    International Nuclear Information System (INIS)

    Yang Haori; Li Yuanjing; Wang Yi; Li Yulan; Li Jin

    2003-01-01

    The construction of a LabVIEW-based detector testing system is described in this paper. In this system, the signal of detector is magnified and digitized, so amplitude or time spectrum can be obtained. The Analog-to-Digital Converter is a peak-sensitive ADC based on VME bus. The virtual instrument constructed by LabVIEW can be used to acquire data, draw spectrum and save testing results

  6. The Need for a Regional Security System Multinational Coast Guard Unit in the Eastern Caribbean

    Science.gov (United States)

    2012-06-08

    the teaching staff of Staff Group 11 A (Mr Matt Bonnott, Dr Thomas Huber, LTC Andrew McIntyre) and Mr William Knight for officiating, my oral...assist me on this journey. Finally, to my wife Vonette, son Isaiah , daughter Makayla, my mother Muriel (this one is for you), and my friends (too...for the implementation of a new security risk management mechanism to enhance the security of the RSS sub-region. According to Thomas Norman in the

  7. Knowledge Based Help desk System in Nuclear Malaysia

    International Nuclear Information System (INIS)

    Mohamad Safuan Sulaiman; Abdul Muin Abdul Rahman; Norzalina Nasirudin; Khairiel Adyani Abdul Ghani; Abdul Aziz Mhd Ramli; Mohd Ashhar Khalid

    2012-01-01

    Knowledge based (K-based) Help desk system is a knowledge oriented web based system that provides support to business process of the technical service providers. It is a multi-centric system which focuses on end-users, technical workers and higher level management through utilization of knowledge which resides and grows within the system. The objectives of the system are to be a user-friendly, capture technical knowledge for efficient performance and educating users for self reliance. These were achieved through the improvement of the help desk business process and better management of technical knowledge. This system has been tested and implemented in Information Technology Center (IT), Engineering Division (BKJ) and Instrumentation and Automation Center (IAC) at the Malaysian Nuclear Agency (Nuclear Malaysia). Higher levels of user satisfaction and faster growth in technical knowledge repository have been recorded in the system. This paper describes the help desk system in the perspective of management of its technical knowledge contributing to strengthening organizational knowledge asset of Nuclear Malaysia as national nuclear research institution. (Author)

  8. A review of studies on community based early warning systems

    Directory of Open Access Journals (Sweden)

    Margaret Macherera

    2016-04-01

    Full Text Available Community-based early warning systems involve community driven collection and analysis of information that enable warning messages to help a community to react to a hazard and reduce the resulting loss or harm. Most early warning systems are designed at the national or global level. Local communities’ capacity to predict weather conditions using indigenous knowledge has been demonstrated in studies focusing on climate change and agriculture in some African countries. This review was motivated by successes made in non-disease specific community-based early warning systems with a view to identify opportunities for developing similar systems for malaria. This article reviewed the existing community-based early warning systems documented in literature. The types of disasters that are addressed by these systems and the methodologies utilised in the development of the systems were identified. The review showed that most of the documented community-based early warning systems focus on natural disasters such as floods, drought, and landslides. Community-based early warning systems for human diseases are very few, even though such systems exist at national and regional and global levels. There is a clear gap in terms of community-based malaria early warning systems. The methodologies for the development of the community-based early warning systems reviewed mainly derive from the four elements of early warning systems; namely risk knowledge, monitoring, warning communication and response capability. The review indicated the need for the development of community based early warning systems for human diseases. Keywords: community; early warning; disaster; hazards

  9. A Password System Based on Sketches

    Science.gov (United States)

    2016-07-12

    Cognometric—recognition-based methods (also referred to as search met- ric [10]) 3 3. Locimetric— cued - recall based methods. Drawmetric systems require users to...chosen, hence the term cued - recall . The most prominent cued - recall based method is PassPoints [6, 7, 8]. Pass- Points presents the user with a single...around for more than a decade. Graphical passwords belong to one of three groups (as proposed in [9]): 1. Drawmetric— recall -based methods60 2

  10. Solar water heating system for a lunar base

    Science.gov (United States)

    Somers, Richard E.; Haynes, R. Daniel

    1992-01-01

    An investigation of the feasibility of using a solar water heater for a lunar base is described. During the investigation, computer codes were developed to model the lunar base configuration, lunar orbit, and heating systems. Numerous collector geometries, orientation variations, and system options were identified and analyzed. The results indicate that the recommended solar water heater could provide 88 percent of the design load and would not require changes in the overall lunar base design. The system would give a 'safe-haven' water heating capability and use only 7 percent to 10 percent as much electricity as an electric heating system. As a result, a fixed position photovoltaic array can be reduced by 21 sq m.

  11. Image-based fingerprint verification system using LabVIEW

    Directory of Open Access Journals (Sweden)

    Sunil K. Singla

    2008-09-01

    Full Text Available Biometric-based identification/verification systems provide a solution to the security concerns in the modern world where machine is replacing human in every aspect of life. Fingerprints, because of their uniqueness, are the most widely used and highly accepted biometrics. Fingerprint biometric systems are either minutiae-based or pattern learning (image based. The minutiae-based algorithm depends upon the local discontinuities in the ridge flow pattern and are used when template size is important while image-based matching algorithm uses both the micro and macro feature of a fingerprint and is used if fast response is required. In the present paper an image-based fingerprint verification system is discussed. The proposed method uses a learning phase, which is not present in conventional image-based systems. The learning phase uses pseudo random sub-sampling, which reduces the number of comparisons needed in the matching stage. This system has been developed using LabVIEW (Laboratory Virtual Instrument Engineering Workbench toolbox version 6i. The availability of datalog files in LabVIEW makes it one of the most promising candidates for its usage as a database. Datalog files can access and manipulate data and complex data structures quickly and easily. It makes writing and reading much faster. After extensive experimentation involving a large number of samples and different learning sizes, high accuracy with learning image size of 100 100 and a threshold value of 700 (1000 being the perfect match has been achieved.

  12. Case Mix Management Systems: An Opportunity to Integrate Medical Records and Financial Management System Data Bases

    Science.gov (United States)

    Rusnak, James E.

    1987-01-01

    Due to previous systems selections, many hospitals (health care facilities) are faced with the problem of fragmented data bases containing clinical, demographic and financial information. Projects to select and implement a Case Mix Management System (CMMS) provide an opportunity to reduce the number of separate physical files and to migrate towards systems with an integrated data base. The number of CMMS candidate systems is often restricted due to data base and system interface issues. The hospital must insure the CMMS project provides a means to implement an integrated on-line hospital information data base for use by departments in operating under a DRG-based Prospective Payment System. This paper presents guidelines for use in selecting a Case Mix Mangement System to meet the hospital's financial and operations planning, budgeting, marketing, and other management needs, while considering the data base implications of the implementation.

  13. Software Engineering and Swarm-Based Systems

    Science.gov (United States)

    Hinchey, Michael G.; Sterritt, Roy; Pena, Joaquin; Rouff, Christopher A.

    2006-01-01

    We discuss two software engineering aspects in the development of complex swarm-based systems. NASA researchers have been investigating various possible concept missions that would greatly advance future space exploration capabilities. The concept mission that we have focused on exploits the principles of autonomic computing as well as being based on the use of intelligent swarms, whereby a (potentially large) number of similar spacecraft collaborate to achieve mission goals. The intent is that such systems not only can be sent to explore remote and harsh environments but also are endowed with greater degrees of protection and longevity to achieve mission goals.

  14. Model-based testing for embedded systems

    CERN Document Server

    Zander, Justyna; Mosterman, Pieter J

    2011-01-01

    What the experts have to say about Model-Based Testing for Embedded Systems: "This book is exactly what is needed at the exact right time in this fast-growing area. From its beginnings over 10 years ago of deriving tests from UML statecharts, model-based testing has matured into a topic with both breadth and depth. Testing embedded systems is a natural application of MBT, and this book hits the nail exactly on the head. Numerous topics are presented clearly, thoroughly, and concisely in this cutting-edge book. The authors are world-class leading experts in this area and teach us well-used

  15. 2008 Stability, Security, Transition and Reconstruction Operations Conference

    Science.gov (United States)

    2008-09-04

    Facilitator Power of Public-Private Partnerships • Health Professional Education • Greater Access to Care China Diabetes Education Program Dominican Republic...Argentina Canada Chile Colombia Ecuador Peru Uruguay Interagency, multinational, inter-institutional partnerships State Department Homeland Security...Disaster Preparedness Disaster Response Regional Response Capacity OFDA-LAC / MDROs Regional Security System (RSS) UNCLASSIFIED ECUADOR / KY PERU / WV

  16. The acid-base resistant zone in three dentin bonding systems.

    Science.gov (United States)

    Inoue, Go; Nikaido, Toru; Foxton, Richard M; Tagami, Junji

    2009-11-01

    An acid-base resistant zone has been found to exist after acid-base challenge adjacent to the hybrid layer using SEM. The aim of this study was to examine the acid-base resistant zone using three different bonding systems. Dentin disks were applied with three different bonding systems, and then a resin composite was light-cured to make dentin disk sandwiches. After acid-base challenge, the polished surfaces were observed using SEM. For both one- and two-step self-etching primer systems, an acid-base resistant zone was clearly observed adjacent to the hybrid layer - but with differing appearances. For the wet bonding system, the presence of an acid-base resistant zone was unclear. This was because the self-etching primer systems etched the dentin surface mildly, such that the remaining mineral phase of dentin and the bonding agent yielded clear acid-base resistant zones. In conclusion, the acid-base resistant zone was clearly observed when self-etching primer systems were used, but not so for the wet bonding system.

  17. Establishment of mobile based nuclear safety inspection system

    International Nuclear Information System (INIS)

    Kim, In Hyeon; Lee, Yoon; Choi, Keun Ho; Lee, Kwang Pyo; Cha, Gi Hyeon; Gook, Cheol Woong; Park, Tae Joo; Kang, Roc Hyeong; Kim, Ji Young; Yoo, Mi Jung

    2005-03-01

    We have developed the mobile-based atomic energy status real time monitoring system and mobile-based atomic energy accident and trouble retrieval system through this study. The mobile-based atomic energy status real time monitoring system is the system enabling its users to monitor nineteen (19) Nuclear Power Plants under operation in the real time based on the PDA(Personal Digital Assistance) via a wireless communication. We have developed the mobile information providing server program and PDA client program for the purpose of providing the atomic energy status information service on the PDA by linking the real time atomic energy status information collected by the computerized technical advisory system for the radiological emergency installed and operated by the KINS. The mobile based atomic energy accident and trouble retrieval system has been developed under the intention of enabling the site inspector to effectively use the past information upon performing the test works at the sites through the local retrieval of past accidents and troubles occurred in the Nuclear Power Plants at the mobile client(PDA). In this regard, we have developed the client program to retrieve the atomic energy accident and trouble status by installing the accident and trouble information database. We also include the function supporting the rapid site report through the employees' information retrieval, site status image file transmission, e-mail and SMS(Short Message Service)

  18. Design Scheme of Remote Monitoring System Based on Qt

    Directory of Open Access Journals (Sweden)

    Xu Dawei

    2015-01-01

    Full Text Available This paper introduces a design scheme of remote monitoring system based on Qt, the scheme of remote monitoring system based on S3C2410 and Qt, with the aid of cross platform development tools Qt and powerful ARM platform design and implementation. The development of remote video surveillance system based on embedded terminal has practical significance and value.

  19. Influence of food quality and salinity on dietary cadmium availability in Mytilus trossulus

    International Nuclear Information System (INIS)

    Widmeyer, Joline R.; Bendell-Young, Leah I.

    2007-01-01

    Surficial sediments (a combination of re-suspended and suspended sediments denoted as RSS) were collected from two distinct marine intertidal habitats. The two habitats differed with respect to salinity (25 ppt versus 15 ppt) and RSS % organic carbon content (24% versus 15%). Feeding experiments were conducted simulating the conditions in the two habitats to determine if salinity and RSS % organic carbon content affected cadmium accumulation in the pacific blue mussel Mytilus trossulus. Eleven different treatments including pure phytoplankton, collected RSS and control clay were radiolabeled with 109 Cd and pulse-fed to M. trossulus under both high (25 ppt) and low salinities (15 ppt). Metal uptake and accumulation was determined using the DYMBAM biodynamic metal bioaccumulation model. Although M. trossulus ingestion rates (IR) were significantly higher at 25 ppt as compared to 15 ppt, assimilation efficiencies (AEs) and [ 109 Cd] tissue levels were significantly lower at high as compared to low salinity exposures. Of the abiotic and biotic parameters examined and in contrast to other studies, differences in salinity rather than ingestion rate or food quality (as defined by % organic carbon content) seemed to best define the observed differences in 109 Cd AE by M. trossulus

  20. Influence of food quality and salinity on dietary cadmium availability in Mytilus trossulus

    Energy Technology Data Exchange (ETDEWEB)

    Widmeyer, Joline R. [Simon Fraser University, Department of Biological Sciences, Burnaby, British Columbia, V5A 1S6 (Canada)]. E-mail: joline_widmeyer@alumni.sfu.ca; Bendell-Young, Leah I. [Simon Fraser University, Department of Biological Sciences, Burnaby, British Columbia, V5A 1S6 (Canada)

    2007-02-28

    Surficial sediments (a combination of re-suspended and suspended sediments denoted as RSS) were collected from two distinct marine intertidal habitats. The two habitats differed with respect to salinity (25 ppt versus 15 ppt) and RSS % organic carbon content (24% versus 15%). Feeding experiments were conducted simulating the conditions in the two habitats to determine if salinity and RSS % organic carbon content affected cadmium accumulation in the pacific blue mussel Mytilus trossulus. Eleven different treatments including pure phytoplankton, collected RSS and control clay were radiolabeled with {sup 109}Cd and pulse-fed to M. trossulus under both high (25 ppt) and low salinities (15 ppt). Metal uptake and accumulation was determined using the DYMBAM biodynamic metal bioaccumulation model. Although M. trossulus ingestion rates (IR) were significantly higher at 25 ppt as compared to 15 ppt, assimilation efficiencies (AEs) and [{sup 109}Cd] tissue levels were significantly lower at high as compared to low salinity exposures. Of the abiotic and biotic parameters examined and in contrast to other studies, differences in salinity rather than ingestion rate or food quality (as defined by % organic carbon content) seemed to best define the observed differences in {sup 109}Cd AE by M. trossulus.

  1. Cellular-based preemption system

    Science.gov (United States)

    Bachelder, Aaron D. (Inventor)

    2011-01-01

    A cellular-based preemption system that uses existing cellular infrastructure to transmit preemption related data to allow safe passage of emergency vehicles through one or more intersections. A cellular unit in an emergency vehicle is used to generate position reports that are transmitted to the one or more intersections during an emergency response. Based on this position data, the one or more intersections calculate an estimated time of arrival (ETA) of the emergency vehicle, and transmit preemption commands to traffic signals at the intersections based on the calculated ETA. Additional techniques may be used for refining the position reports, ETA calculations, and the like. Such techniques include, without limitation, statistical preemption, map-matching, dead-reckoning, augmented navigation, and/or preemption optimization techniques, all of which are described in further detail in the above-referenced patent applications.

  2. Intelligent Case Based Decision Support System for Online Diagnosis of Automated Production System

    International Nuclear Information System (INIS)

    Ben Rabah, N; Saddem, R; Carre-Menetrier, V; Ben Hmida, F; Tagina, M

    2017-01-01

    Diagnosis of Automated Production System (APS) is a decision-making process designed to detect, locate and identify a particular failure caused by the control law. In the literature, there are three major types of reasoning for industrial diagnosis: the first is model-based, the second is rule-based and the third is case-based. The common and major limitation of the first and the second reasonings is that they do not have automated learning ability. This paper presents an interactive and effective Case Based Decision Support System for online Diagnosis (CB-DSSD) of an APS. It offers a synergy between the Case Based Reasoning (CBR) and the Decision Support System (DSS) in order to support and assist Human Operator of Supervision (HOS) in his/her decision process. Indeed, the experimental evaluation performed on an Interactive Training System for PLC (ITS PLC) that allows the control of a Programmable Logic Controller (PLC), simulating sensors or/and actuators failures and validating the control algorithm through a real time interactive experience, showed the efficiency of our approach. (paper)

  3. Comparing social factors affecting recommender decisions in online and educational social network

    Science.gov (United States)

    MartÍn, Estefanía; Hernán-Losada, Isidoro; Haya, Pablo A.

    2016-01-01

    In the educational context, there is an increasing interest in learning networks. Recommender systems (RSs) can play an important role in achieving educational objectives. Although we can find many papers focused on recommendation techniques and algorithms, in general, less attention has been dedicated to social factors that influence the recommendation process. This process could be improved if we had a deeper understanding of the social factors that influence the quality or validity of a suggestion made by the RS. This work elucidates and analyses the social factors that influence the design and decision-making process of RSs. We conducted a survey in which 126 undergraduate students were asked to extract which are the main factors for improving suggestions when they are interacting with an Online Social Network (OSN) or in an Educational Social Network (ESN). The results show that different factors have to be considered depending on the type of network.

  4. Description of a Mobile-based Electronic Informed Consent System Development.

    Science.gov (United States)

    Hwang, Min-A; Kwak, In Ja

    2015-01-01

    Seoul National University Hospital constructed and implemented a computer-based informed consent system in December 2011. As of 2013, 30% of the informed consents were still filled out manually on paper. Patients and medical staff continuously suggested the implementation of a system for electronic informed consent using portable devices. Therefore, a mobile-based system for electronic informed consent was developed in 2013 to prevent the issues that arise with computer-based systems and paper informed consent. The rate of filling out electronic informed consent increased from 69% to 95% following the implementation of the mobile-based electronic informed consent. This construction of a mobile-based electronic informed consent system would be a good reference point for the development of a mobile-based Electronic Medical Record and for various mobile system environments in medical institutions.

  5. Developing stereo image based robot control system

    Energy Technology Data Exchange (ETDEWEB)

    Suprijadi,; Pambudi, I. R.; Woran, M.; Naa, C. F; Srigutomo, W. [Department of Physics, FMIPA, InstitutTeknologi Bandung Jl. Ganesha No. 10. Bandung 40132, Indonesia supri@fi.itb.ac.id (Indonesia)

    2015-04-16

    Application of image processing is developed in various field and purposes. In the last decade, image based system increase rapidly with the increasing of hardware and microprocessor performance. Many fields of science and technology were used this methods especially in medicine and instrumentation. New technique on stereovision to give a 3-dimension image or movie is very interesting, but not many applications in control system. Stereo image has pixel disparity information that is not existed in single image. In this research, we proposed a new method in wheel robot control system using stereovision. The result shows robot automatically moves based on stereovision captures.

  6. Rule based systems for big data a machine learning approach

    CERN Document Server

    Liu, Han; Cocea, Mihaela

    2016-01-01

    The ideas introduced in this book explore the relationships among rule based systems, machine learning and big data. Rule based systems are seen as a special type of expert systems, which can be built by using expert knowledge or learning from real data. The book focuses on the development and evaluation of rule based systems in terms of accuracy, efficiency and interpretability. In particular, a unified framework for building rule based systems, which consists of the operations of rule generation, rule simplification and rule representation, is presented. Each of these operations is detailed using specific methods or techniques. In addition, this book also presents some ensemble learning frameworks for building ensemble rule based systems.

  7. An Event-driven, Value-based, Pull Systems Engineering Scheduling Approach

    Science.gov (United States)

    2012-03-01

    combining a services approach to systems engineering with a kanban -based scheduling system. It provides the basis for validating the approach with...agent-based simulations. Keywords-systems engineering; systems engineering process; lean; kanban ; process simulation I. INTRODUCTION AND BACKGROUND...approaches [8], [9], we are investigating the use of flow-based pull scheduling techniques ( kanban systems) in a rapid response development

  8. The Abstract Machine Model for Transaction-based System Control

    Energy Technology Data Exchange (ETDEWEB)

    Chassin, David P.

    2003-01-31

    Recent work applying statistical mechanics to economic modeling has demonstrated the effectiveness of using thermodynamic theory to address the complexities of large scale economic systems. Transaction-based control systems depend on the conjecture that when control of thermodynamic systems is based on price-mediated strategies (e.g., auctions, markets), the optimal allocation of resources in a market-based control system results in an emergent optimal control of the thermodynamic system. This paper proposes an abstract machine model as the necessary precursor for demonstrating this conjecture and establishes the dynamic laws as the basis for a special theory of emergence applied to the global behavior and control of complex adaptive systems. The abstract machine in a large system amounts to the analog of a particle in thermodynamic theory. The permit the establishment of a theory dynamic control of complex system behavior based on statistical mechanics. Thus we may be better able to engineer a few simple control laws for a very small number of devices types, which when deployed in very large numbers and operated as a system of many interacting markets yields the stable and optimal control of the thermodynamic system.

  9. Spatial prediction of landslides using a hybrid machine learning approach based on Random Subspace and Classification and Regression Trees

    Science.gov (United States)

    Pham, Binh Thai; Prakash, Indra; Tien Bui, Dieu

    2018-02-01

    A hybrid machine learning approach of Random Subspace (RSS) and Classification And Regression Trees (CART) is proposed to develop a model named RSSCART for spatial prediction of landslides. This model is a combination of the RSS method which is known as an efficient ensemble technique and the CART which is a state of the art classifier. The Luc Yen district of Yen Bai province, a prominent landslide prone area of Viet Nam, was selected for the model development. Performance of the RSSCART model was evaluated through the Receiver Operating Characteristic (ROC) curve, statistical analysis methods, and the Chi Square test. Results were compared with other benchmark landslide models namely Support Vector Machines (SVM), single CART, Naïve Bayes Trees (NBT), and Logistic Regression (LR). In the development of model, ten important landslide affecting factors related with geomorphology, geology and geo-environment were considered namely slope angles, elevation, slope aspect, curvature, lithology, distance to faults, distance to rivers, distance to roads, and rainfall. Performance of the RSSCART model (AUC = 0.841) is the best compared with other popular landslide models namely SVM (0.835), single CART (0.822), NBT (0.821), and LR (0.723). These results indicate that performance of the RSSCART is a promising method for spatial landslide prediction.

  10. Evaluation of computer-based ultrasonic inservice inspection systems

    International Nuclear Information System (INIS)

    Harris, R.V. Jr.; Angel, L.J.; Doctor, S.R.; Park, W.R.; Schuster, G.J.; Taylor, T.T.

    1994-03-01

    This report presents the principles, practices, terminology, and technology of computer-based ultrasonic testing for inservice inspection (UT/ISI) of nuclear power plants, with extensive use of drawings, diagrams, and LTT images. The presentation is technical but assumes limited specific knowledge of ultrasonics or computers. The report is divided into 9 sections covering conventional LTT, computer-based LTT, and evaluation methodology. Conventional LTT topics include coordinate axes, scanning, instrument operation, RF and video signals, and A-, B-, and C-scans. Computer-based topics include sampling, digitization, signal analysis, image presentation, SAFI, ultrasonic holography, transducer arrays, and data interpretation. An evaluation methodology for computer-based LTT/ISI systems is presented, including questions, detailed procedures, and test block designs. Brief evaluations of several computer-based LTT/ISI systems are given; supplementary volumes will provide detailed evaluations of selected systems

  11. Indoor localization using unsupervised manifold alignment with geometry perturbation

    KAUST Repository

    Majeed, Khaqan

    2014-04-01

    The main limitation of deploying/updating Received Signal Strength (RSS) based indoor localization is the construction of fingerprinted radio map, which is quite a hectic and time-consuming process especially when the indoor area is enormous and/or dynamic. Different approaches have been undertaken to reduce such deployment/update efforts, but the performance degrades when the fingerprinting load is reduced below a certain level. In this paper, we propose an indoor localization scheme that requires as low as 1% fingerprinting load. This scheme employs unsupervised manifold alignment that takes crowd sourced RSS readings and localization requests as source data set and the environment\\'s plan coordinates as destination data set. The 1% fingerprinting load is only used to perturb the local geometries in the destination data set. Our proposed algorithm was shown to achieve less than 5 m mean localization error with 1% fingerprinting load and a limited number of crowd sourced readings, when other learning based localization schemes pass the 10 m mean error with the same information.

  12. Broadening failure rate distributions in PRA uncertainty analyses

    International Nuclear Information System (INIS)

    Martz, H.F.

    1984-01-01

    Several recent nuclear power plant probabilistic risk assessments (PRAs) have utilized broadened Reactor Safety Study (RSS) component failure rate population variability curves to compensate for such things as expert overvaluation bias in the estimates upon which the curves are based. A simple two-components of variation empirical Bayes model is proposed for use in estimating the between-expert variability curve in the presence of such biases. Under certain conditions this curve is a population variability curve. Comparisons are made with the existing method. The popular procedure appears to be generally much more conservative than the empirical Bayes method in removing such biases. In one case the broadened curve based on the popular method is more than two orders of magnitude broader than the empirical Bayes curve. In another case it is found that the maximum justifiable degree of broadening of the RSS curve is to increase α from 5% to 12%, which is significantly less than 20% value recommended in the popular approach. 15 references, 1 figure, 5 tables

  13. Indoor localization using unsupervised manifold alignment with geometry perturbation

    KAUST Repository

    Majeed, Khaqan; Sorour, Sameh; Al-Naffouri, Tareq Y.; Valaee, Shahrokh

    2014-01-01

    The main limitation of deploying/updating Received Signal Strength (RSS) based indoor localization is the construction of fingerprinted radio map, which is quite a hectic and time-consuming process especially when the indoor area is enormous and/or dynamic. Different approaches have been undertaken to reduce such deployment/update efforts, but the performance degrades when the fingerprinting load is reduced below a certain level. In this paper, we propose an indoor localization scheme that requires as low as 1% fingerprinting load. This scheme employs unsupervised manifold alignment that takes crowd sourced RSS readings and localization requests as source data set and the environment's plan coordinates as destination data set. The 1% fingerprinting load is only used to perturb the local geometries in the destination data set. Our proposed algorithm was shown to achieve less than 5 m mean localization error with 1% fingerprinting load and a limited number of crowd sourced readings, when other learning based localization schemes pass the 10 m mean error with the same information.

  14. Instability and associated roll structure of Marangoni convection in high Prandtl number liquid bridge with large aspect ratio

    Science.gov (United States)

    Yano, T.; Nishino, K.; Kawamura, H.; Ueno, I.; Matsumoto, S.

    2015-02-01

    This paper reports the experimental results on the instability and associated roll structures (RSs) of Marangoni convection in liquid bridges formed under the microgravity environment on the International Space Station. The geometry of interest is high aspect ratio (AR = height/diameter ≥ 1.0) liquid bridges of high Prandtl number fluids (Pr = 67 and 207) suspended between coaxial disks heated differentially. The unsteady flow field and associated RSs were revealed with the three-dimensional particle tracking velocimetry. It is found that the flow field after the onset of instability exhibits oscillations with azimuthal mode number m = 1 and associated RSs traveling in the axial direction. The RSs travel in the same direction as the surface flow (co-flow direction) for 1.00 ≤ AR ≤ 1.25 while they travel in the opposite direction (counter-flow direction) for AR ≥ 1.50, thus showing the change of traveling directions with AR. This traveling direction for AR ≥ 1.50 is reversed to the co-flow direction when the temperature difference between the disks is increased to the condition far beyond the critical one. This change of traveling directions is accompanied by the increase of the oscillation frequency. The characteristics of the RSs for AR ≥ 1.50, such as the azimuthal mode of oscillation, the dimensionless oscillation frequency, and the traveling direction, are in reasonable agreement with those of the previous sounding rocket experiment for AR = 2.50 and those of the linear stability analysis of an infinite liquid bridge.

  15. System-Platforms-Based SystemC TLM Design of Image Processing Chains for Embedded Applications

    Directory of Open Access Journals (Sweden)

    Omar Hammami

    2007-08-01

    Full Text Available Intelligent vehicle design is a complex task which requires multidomains modeling and abstraction. Transaction-level modeling (TLM and component-based software development approaches accelerate the process of an embedded system design and simulation and hence improve the overall productivity. On the other hand, system-level design languages facilitate the fast hardware synthesis at behavioral level of abstraction. In this paper, we introduce an approach for hardware/software codesign of image processing applications targeted towards intelligent vehicle that uses platform-based SystemC TLM and component-based software design approaches along with HW synthesis using SystemC to accelerate system design and verification process. Our experiments show the effectiveness of our methodology.

  16. System-Platforms-Based SystemC TLM Design of Image Processing Chains for Embedded Applications

    Directory of Open Access Journals (Sweden)

    Lacassagne Lionel

    2007-01-01

    Full Text Available Intelligent vehicle design is a complex task which requires multidomains modeling and abstraction. Transaction-level modeling (TLM and component-based software development approaches accelerate the process of an embedded system design and simulation and hence improve the overall productivity. On the other hand, system-level design languages facilitate the fast hardware synthesis at behavioral level of abstraction. In this paper, we introduce an approach for hardware/software codesign of image processing applications targeted towards intelligent vehicle that uses platform-based SystemC TLM and component-based software design approaches along with HW synthesis using SystemC to accelerate system design and verification process. Our experiments show the effectiveness of our methodology.

  17. An Embedded Rule-Based Diagnostic Expert System in Ada

    Science.gov (United States)

    Jones, Robert E.; Liberman, Eugene M.

    1992-01-01

    Ada is becoming an increasingly popular programming language for large Government-funded software projects. Ada with it portability, transportability, and maintainability lends itself well to today's complex programming environment. In addition, expert systems have also assumed a growing role in providing human-like reasoning capability expertise for computer systems. The integration is discussed of expert system technology with Ada programming language, especially a rule-based expert system using an ART-Ada (Automated Reasoning Tool for Ada) system shell. NASA Lewis was chosen as a beta test site for ART-Ada. The test was conducted by implementing the existing Autonomous Power EXpert System (APEX), a Lisp-based power expert system, in ART-Ada. Three components, the rule-based expert systems, a graphics user interface, and communications software make up SMART-Ada (Systems fault Management with ART-Ada). The rules were written in the ART-Ada development environment and converted to Ada source code. The graphics interface was developed with the Transportable Application Environment (TAE) Plus, which generates Ada source code to control graphics images. SMART-Ada communicates with a remote host to obtain either simulated or real data. The Ada source code generated with ART-Ada, TAE Plus, and communications code was incorporated into an Ada expert system that reads the data from a power distribution test bed, applies the rule to determine a fault, if one exists, and graphically displays it on the screen. The main objective, to conduct a beta test on the ART-Ada rule-based expert system shell, was achieved. The system is operational. New Ada tools will assist in future successful projects. ART-Ada is one such tool and is a viable alternative to the straight Ada code when an application requires a rule-based or knowledge-based approach.

  18. Creating adaptive web recommendation system based on user behavior

    Science.gov (United States)

    Walek, Bogdan

    2018-01-01

    The paper proposes adaptive web recommendation system based on user behavior. The proposed system uses expert system to evaluating and recommending suitable items of content. Relevant items are subsequently evaluated and filtered based on history of visited items and user´s preferred categories of items. Main parts of the proposed system are presented and described. The proposed recommendation system is verified on specific example.

  19. Web-Based Naval Fleet Logistics Information System

    National Research Council Canada - National Science Library

    Li, Yanfeng

    2007-01-01

    ... and execution, and as an information system for corporate knowledge management. The capability of a Web-based system will optimize Naval supply chain operations, significantly reduce man-hours, provide a mechanism for continuous process improvement, and enable the Naval supply system to become a learning organization.

  20. Support System Model for Value based Group Decision on Roof System Selection

    Directory of Open Access Journals (Sweden)

    Christiono Utomo

    2011-02-01

    Full Text Available A group decision support system is required on a value-based decision because there are different concern caused by differing preferences, experiences, and background. It is to enable each decision-maker to evaluate and rank the solution alternatives before engaging into negotiation with other decision-makers. Stakeholder of multi-criteria decision making problems usually evaluates the alternative solution from different perspective, making it possible to have a dominant solution among the alternatives. Each stakeholder needs to identify the goals that can be optimized and those that can be compromised in order to reach an agreement with other stakeholders. This paper presents group decision model involving three decision-makers on the selection of suitable system for a building’s roof. The objective of the research is to find an agreement options model and coalition algorithms for multi person decision with two main preferences of value which are function and cost. The methodology combines value analysis method using Function Analysis System Technique (FAST; Life Cycle Cost analysis, group decision analysis method based on Analytical Hierarchy Process (AHP in a satisfying options, and Game theory-based agent system to develop agreement option and coalition formation for the support system. The support system bridges theoretical gap between automated design in construction domain and automated negotiation in information technology domain by providing a structured methodology which can lead to systematic support system and automated negotiation. It will contribute to value management body of knowledge as an advanced method for creativity and analysis phase, since the practice of this knowledge is teamwork based. In the case of roof system selection, it reveals the start of the first negotiation round. Some of the solutions are not an option because no individual stakeholder or coalition of stakeholders desires to select it. The result indicates