Occupational contact urticaria and protein contact dermatitis.

Science.gov (United States)

Doutre, Marie-Sylvie

2005-01-01

Irritant dermatitis and eczema are the most prevalent occupational skin diseases. Less common are immediate contact reactions such as contact urticaria and protein contact dermatitis. Occupational contact urticaria can be subdivided into two categories, immunological and non immunological. However, some agents can induce these two types of reactions. Contact urticaria to natural rubber latex is particularly frequent among health care personnel, but contact urticaria to a wide variety of other substances occurs in many other occupations. Among those at risk are cooks, bakers, butchers, restaurant personnel, veterinarians, hairdressers, florists, gardeners, and forestry workers. Protein contact dermatitis in some of these occupations is caused principally by proteins of animal or plant origin, especially among individuals with a history of atopic dermatitis. Diagnosis requires careful interrogation, clinical examination and skin tests (open tests and prick tests with immediate lecture) to identify a particular contact allergen.

Preparation of Low Allergenic Protein Concentrated Natural Rubber Latex Using Suitable Low Molecular Weight Cellulose Derivatives Induced by Gamma Irradiation

International Nuclear Information System (INIS)

Siri-Upathum, Chyagrit; Boonyawat, Jariya

2007-08-01

Full text: Low molecular weight carboxy methyl cellulose (CMC), hydroxyl ethyl cellulose (HEC), hydroxyl propyl cellulose (HPC) and methyl cellulose (MC) prepared by radiation-induced degradation were added into diluted natural concentrated latex prior to centrifuge for a purpose of reducing allergenic rubber protein in the latex. Optimum molecular weight (Mv) of CMC and HEC for such a purpose was found to be 17-18 kDa which decreased allergenic rubber protein (14-94 kDa) to an undetectable amount as determined by SDS PAGE method

Involvement of Ethylene in the Latex Metabolism and Tapping Panel Dryness of Hevea brasiliensis

Science.gov (United States)

Putranto, Riza-Arief; Herlinawati, Eva; Rio, Maryannick; Leclercq, Julie; Piyatrakul, Piyanuch; Gohet, Eric; Sanier, Christine; Oktavia, Fetrina; Pirrello, Julien; Kuswanhadi; Montoro, Pascal

2015-01-01

Ethephon, an ethylene releaser, is used to stimulate latex production in Hevea brasiliensis. Ethylene induces many functions in latex cells including the production of reactive oxygen species (ROS). The accumulation of ROS is responsible for the coagulation of rubber particles in latex cells, resulting in the partial or complete stoppage of latex flow. This study set out to assess biochemical and histological changes as well as changes in gene expression in latex and phloem tissues from trees grown under various harvesting systems. The Tapping Panel Dryness (TPD) susceptibility of Hevea clones was found to be related to some biochemical parameters, such as low sucrose and high inorganic phosphorus contents. A high tapping frequency and ethephon stimulation induced early TPD occurrence in a high latex metabolism clone and late occurrence in a low latex metabolism clone. TPD-affected trees had smaller number of laticifer vessels compared to healthy trees, suggesting a modification of cambial activity. The differential transcript abundance was observed for twenty-seven candidate genes related to TPD occurrence in latex and phloem tissues for ROS-scavenging, ethylene biosynthesis and signalling genes. The predicted function for some Ethylene Response Factor genes suggested that these candidate genes should play an important role in regulating susceptibility to TPD. PMID:26247941

Latex allergy in health care

Directory of Open Access Journals (Sweden)

Tina Virtič

2012-11-01

Full Text Available The increasing use of natural rubber latex medical gloves in the last three decades has caused an increase in latex allergy. The majority of risk groups for allergy development include health care workers, workers in the rubber industry, atopic individuals and children with congenital malformations. Three types of pathological reactions can occur in people using latex medical gloves: irritant contact dermatitis, allergic contact dermatitis and immediate hypersensitivity. The latex allergy is caused by constituent components of latex gloves and added powders; there are also numerous latex allergens involved in cross-reactivity between latex and fruits and vegetables, the so-called latex-fruit syndrome. The diagnosis is based on an accurate history of exposure, clinical presentation and confirmatory in vivo and in vitro tests. Prevention is the easiest, most effective and least expensive way to avoid latex allergy. Powder-free latex gloves with reduced levels of proteins and chemicals, and synthetic gloves for allergic workers must be provided in the work environment. There are already many health care institutions around the world where all latex products have been replaced by synthetic material products.

Latex in the Hospital Environment

Science.gov (United States)

LATEX in the Hospital Environment Updated Fall 2015 This list provides a guide to some of the most common objects containing latex and offers some ... remover–Sepha Pharm) 1 LATEX in the Hospital Environment (continued) Frequently contains LATEX OR/Infection Control masks, ...

Practical Latex

CERN Document Server

Grätzer, George

2014-01-01

Accessible at 200+ pages to all who want to learn the practical usages of LaTeX Avoids technical subjects like font usage Friendly and easy to read, with many examples included Extra source materials include sample LaTeX files and suggestions for further reading

Size effects of latex nanomaterials on lung inflammation in mice

International Nuclear Information System (INIS)

Inoue, Ken-ichiro; Takano, Hirohisa; Yanagisawa, Rie; Koike, Eiko; Shimada, Akinori

2009-01-01

Effects of nano-sized materials (nanomaterials) on sensitive population have not been well elucidated. This study examined the effects of pulmonary exposure to (latex) nanomaterials on lung inflammation related to lipopolysaccharide (LPS) or allergen in mice, especially in terms of their size-dependency. In protocol 1, ICR male mice were divided into 8 experimental groups that intratracheally received a single exposure to vehicle, latex nanomaterials (250 μg/animal) with three sizes (25, 50, and 100 nm), LPS (75 μg/animal), or LPS plus latex nanomaterials. In protocol 2, ICR male mice were divided into 8 experimental groups that intratracheally received repeated exposure to vehicle, latex nanomaterials (100 μg/animal), allergen (ovalbumin: OVA; 1 μg/animal), or allergen plus latex nanomaterials. In protocol 1, latex nanomaterials with all sizes exacerbated lung inflammation elicited by LPS, showing an overall trend of amplified lung expressions of proinflammatory cytokines. Furthermore, LPS plus nanomaterials, especially with size less than 50 nm, significantly elevated circulatory levels of fibrinogen, macrophage chemoattractant protein-1, and keratinocyte-derived chemoattractant, and von Willebrand factor as compared with LPS alone. The enhancement tended overall to be greater with the smaller nanomaterials than with the larger ones. In protocol 2, latex nanomaterials with all sizes did not significantly enhance the pathophysiology of allergic asthma, characterized by eosinophilic lung inflammation and Igs production, although latex nanomaterials with less than 50 nm significantly induced/enhanced neutrophilic lung inflammation. These results suggest that latex nanomaterials differentially affect two types of (innate and adaptive immunity-dominant) lung inflammation

OCCUPATIONAL CONTACT DERMATITIS AMONGST DENTISTS AND DENTAL TECHNICIANS.

Science.gov (United States)

Lugović-Mihić, Liborija; Ferček, Iva; Duvančić, Tomislav; Bulat, Vedrana; Ježovita, Josip; Novak-Bilić, Gaby; Šitum, Mirna

2016-06-01

Since the working medical personnel including dentists and dental technicians mainly use their hands, it is understandable that the most common occupational disease amongst medical personnel is contact dermatitis (CD) (80%-90% of cases). Development of occupational CD is caused by contact of the skin with various substances in occupational environment. Occupational etiologic factors for dental personnel are foremost reactions to gloves containing latex, followed by various dental materials (e.g., metals, acrylates), detergents, lubricants, solvents, chemicals, etc. Since occupational CD is relatively common in dental personnel, its timely recognition, treatment and taking preventive measures is needed. Achieving skin protection at exposed workplaces is of special importance, as well as implementing necessary measures consequently and sufficiently, which is sometimes difficult to achieve. Various studies have shown the benefit of applying preventive measures, such as numerous protocols for reducing and managing latex sensitivity and other forms of CD in dentistry. Active involvement of physicians within the health care system, primarily dermatologists, occupational medicine specialists and general medicine doctors is needed for establishing an accurate medical diagnosis and confirmation of occupational skin disease.

[Prevention of adverse effects in latex allergic patients: organizing a latex safe operating theatre].

Science.gov (United States)

Bonalumi, Sabrina; Barbonaglia, Patrizia; Bertocchi, Carmen

2006-01-01

In 2001 the General Health Direction of Region Lombardia approved (decree n. 22303) a guideline for the prevention of latex allergic reactions in patients and health care workers. This document provides general recommendations in order to standardize behaviors in regional health care facilities. The reason is due to a rise in the incident of reactions to latex products in the last 20 years. Nowadays the prevalence is higher in certain risk groups (subjected to frequent and repeated exposures) rather than the general population. The aim of the project was to organize a latex safe operating theatre in the Ospedale Maggiore Policlinico, Mangiagalli e Regina Elena of Milan (Fondazione) and to standardize behaviors in order to prevent adverse effects in latex allergic patients. Thanks to the literature review and the creation of a multidisciplinar team, we produced a protocol. Therefore, we requested manufacturers the certification of the latex content of their products. Results and conclusion. When latex allergic patients need to undergone surgery in our hospital, a latex safe operating theatre is organized by personnel following a multidisciplinar protocol. No allergic reactions were experienced during surgical procedures after the creation of an environment as free as possible from latex contamination. The project will involve an emergency room, one room or more of a ward and of the outpatients department.

Transcript Profiling of Hevea brasiliensis during Latex Flow

Directory of Open Access Journals (Sweden)

Jinquan Chao

2017-11-01

Full Text Available Latex exploitation enhances latex regeneration in rubber trees. The latex exploitation-caused latex flow lasts from 10 min to a few hours, which is convenient for exploring the transcript profiling of latex metabolism-related genes at the different stages of latex flow. In the present study, the expression pattern of 62 latex metabolism-related genes involved in water transportation, carbohydrate metabolism, natural rubber biosynthesis, hormone signaling, ROS generation and scavenging, and latex coagulum across three stages of latex flow between rubber tree clones CATAS7-33-97 and CATAS8-79 were comparatively analyzed by quantitative real-time PCR. The two clones show differences in latex regeneration and have a different duration of latex flow. The results showed that the expression levels of 38 genes were significantly higher in CATAS8-79 latex than in CATAS7-33-97 during latex regeneration, while 45 genes had a notably higher expression level in CATAS8-79 latex during latex flow. Together with the activation of the MEP pathway and jasmonate pathway in CATAS8-79 latex, HbPIP1;3, HbPIP1;4, HbSUT3, HbSus3, HbHMGS1-2, HbMK should contribute to the high latex regeneration ability. The up-regulation of ethylene signaling and Hb44KD and the down-regulation of latex coagulation-related genes in CATAS8-79 latex might contribute to its longer latex flow duration. This study provides some cues for revealing the regulation of latex metabolism in rubber trees.

Latex allergy and filaggrin null mutations

DEFF Research Database (Denmark)

Carlsen, Berit C; Meldgaard, Michael; Hamann, Dathan

2011-01-01

to aeroallergens and it is possible that filaggrin null mutations also increase the risk of latex allergy. The aim of this paper was to examine the association between filaggrin null mutations and type I latex allergy. Methods Twenty latex allergic and 24 non-latex allergic dentists and dental assistants...... in the cases in this study may not have occurred through direct skin contact but through the respiratory organs via latex proteins that are absorbed in glove powder and aerosolized...

Cream concentrated latex for foam rubber products

Science.gov (United States)

Suksup, R.; Imkaew, C.; Smitthipong, W.

2017-12-01

Fresh natural latex (around 40% rubber and 60% water) can be transformed to concentrated natural latex (around 60% rubber and 40% water) in order to realise economical transportation and easier latex product’s preparation. The concentrated natural latex is an extremely valuable material. It can be applied for many types of products, for example, foam rubber as pillow and mattress, elastic band, etc. Industrially, the concentrated natural latex can be prepared by centrifugation which requires an enormous expensive machine. From the eco-friendly products point of view, most of rubber entrepreneurs in the world try to develop a green rubber product. So, the main objective of this study is to prepare the cream concentrated latex without any sophisticated machine. Thus, we work on a simple, cheap and green method that does not use any expensive machine but uses water-based chemical as sodium alginate to prepare the cream concentrated latex. The optimal amount of sodium alginate in the latex was studied. The main characteristics of the cream concentrated latex were tested by various technics, such as alkalinity, total solid content (TSC), dry rubber content (DRC), etc. We found that there are no significant differences of results between fresh natural latex and cream concentrated latex, except for the TSC and DRC. The TSC and DRC of cream latex are higher than those of fresh natural latex. Finally, we propose a model of natural rubber particle and sodium alginate to form the cream concentrated latex.

Prevalence of Allergy to Natural Rubber Latex and Potential Cross Reacting Food in Operation Room Staff in Shiraz Hospitals -2006

Directory of Open Access Journals (Sweden)

H Nabavizade

2007-07-01

Full Text Available Introduction & Objective: Allergic reactions to natural rubber latex have increased during past 10 years especially among health care workers and patients with high exposure to latex allergens. Allergic reaction to latex is related to many diseases like occupational asthma. This study was performed to determine the prevalence of allergy to natural rubber latex and potential cross reacting food in operation room staff in Shiraz hospitals. Materials & Methods: In this cross-sectional descriptive study five hundred eighty operation room staff of ten private and state hospitals in Shiraz completed latex allergy questionnaire. They were questioned about personal history and previous history of latex sensitivity, symptoms of latex reactivity and about other allergies particularly to foods that may cross react with latex. Informed consent was obtained and skin prick testing was performed with natural rubber latex. Skin prick tests were done with three potentially cross reacting food (banana, Kiwi, and potato. The obtained data were analyzed with SPSS software and Chi-square test. Results: Among the 580 operation room workers 104 (17.9 % of participants were positive to latex skin test. We found a significant association between positive skin test to latex in operation room staff and atopy, urticaria and food allergy. Positive skin test to latex related to positive kiwi skin test (p<0.05. The prevalence did not vary by sex, age, education, surgical and non surgical glove users, history of contact dermatitis or smoking status. Conclusion: Latex allergy has a high prevalence in personnel of operation room. Evaluation of present symptom and prediction of future disease necessitate screening test in individuals at risk.

Occupational contact dermatitis amongst dentists and dental technicians

OpenAIRE

Lugović-Mihić, Liborija; Ferček, Iva; Duvančić, Tomislav; Bulat, Vedrana; Ježovita, Josip; Novak-Bilić, Gaby; Šitum, Mirna

2016-01-01

Since the working medical personnel including dentists and dental technicians mainly use their hands, it is understandable that the most common occupational disease amongst medical personnel is contact dermatitis (CD) (80%-90% of cases). Development of occupational CD is caused by contact of the skin with various substances in occupational environment. Occupational etiologic factors for dental personnel are foremost reactions to gloves containing latex, followed by various dental materials...

International Occupational Therapy Research Priorities.

Science.gov (United States)

Mackenzie, Lynette; Coppola, Susan; Alvarez, Liliana; Cibule, Lolita; Maltsev, Sergey; Loh, Siew Yim; Mlambo, Tecla; Ikiugu, Moses N; Pihlar, Zdenka; Sriphetcharawut, Sarinya; Baptiste, Sue; Ledgerd, Richard

2017-04-01

Occupational therapy is a global profession represented by the World Federation of Occupational Therapists (WFOT). International research priorities are needed for strategic guidance on global occupational therapy practice. The objective of this study was to develop international research priorities to reflect global occupational therapy practice. A Delphi study using three rounds of electronic surveys, distributed to WFOT member organizations and WFOT accredited universities, was conducted. Data were analyzed after each round, and priorities were presented for rating and ranking in order of importance. Forty-six (53%) out of 87 WFOT member countries participated in the Delphi process. Eight research priorities were confirmed by the final electronic survey round. Differences were observed in rankings given by member organizations and university respondents. Despite attrition at Round 3, the final research priorities will help to focus research efforts in occupational therapy globally. Follow-up research is needed to determine how the research priorities are being adopted internationally.

Dragon Fruit Foliage Plant-Based Coagulant for Treatment of Concentrated Latex Effluent: Comparison of Treatment with Ferric Sulfate

Directory of Open Access Journals (Sweden)

Juferi Idris

2013-01-01

Full Text Available The effectiveness of dragon fruit foliage as a natural coagulant for treatment of concentrated latex effluent was investigated and compared with ferric sulfate, a chemical coagulant. Dragon fruit is a round and often red-colored fruit with scales-like texture and is native to south American countries which is also cultivated and heavily marketed in southeast Asian countries. Its foliage represents a part of its overall plant system. Latex effluent is one of the main byproduct from rubber processing factories in Malaysia. Three main parameters investigated were chemical oxygen demand (COD, suspended solids (SS, and turbidity of effluent. Coagulation experiments using jar test were performed with a flocculation system where the effects of latex effluent pH as well as coagulation dosage on coagulation effectiveness were examined. The highest recorded COD, SS, and turbidity removal percentages for foliage were observed for effluent pH 10 at 94.7, 88.9, and 99.7%, respectively. It is concluded that the foliage showed tremendous potential as a natural coagulant for water treatment purposes. The foliage could be used in the pretreatment stage of Malaysian latex effluent prior to secondary treatment.

Anti-ulcer activity of Synadenium grantii latex

Directory of Open Access Journals (Sweden)

Larissa L. G. Costa

2012-10-01

Full Text Available Synadenium grantii Hook f., Euphorbiaceae, is popularly known as leitosinha or janaúba. The diluted latex (18 drops/L of water is commonly used in the south of Brazil to treat gastric disturbances. This study evaluated phytochemical screening and toxicity using Artemia salina Leach of crude bark extract and also latex. The toxicity and the anti-ulcer activity of S. grantii latex were also tested in rats. Phytochemical results showed presence of tannins, terpenes, unsaponificable substances, coumarins and anthraquinones in the crude bark extract and terpenes in the latex. Gas chromatography-mass spectrometry (GC-MS analysis demonstrated the presence of diterpene tigliane esters in the latex, identified as 12-deoxyphorbol-13-(2-metilpropionate and phorbol 12,13,20-triacetate. The toxicity results using A. salina presented CL50 26.58μg/mL and CL50 778.66μg/mL, for the latex and the crude bark extract respectively. The toxicological hepatic parameters of the diluted latex were not different to the control group (p<0.05. The eosinophils cells showed an increase in both the diluted and pure latex groups. The pure latex showed gastric protection of 90% (p<0.05 and the diluted latex showed 6% compared to the negative control. Therefore, our data indicate that S. grantii latex, under research conditions presented gastric protection. Pure latex showed more toxicity than the diluted latex.

Radiation prevulcanized natural rubber latex: Cytotoxicity and safety evaluation on animal

Energy Technology Data Exchange (ETDEWEB)

Keong, C C; Zin, W M Wan; Ibrahim, P; Ibrahim, S, E-mail: chai@nuclearmalaysia.gov.my [Malaysian Nuclear Agency, Bangi, 43000 Kajang, Selangor (Malaysia)

2010-05-15

Radiation prevulcanized natural rubber latex (RVNRL) was claimed to be more user friendly than natural rubber latex prevulcanized by sulphur curing system. The absence of Type IV allergy inducing chemicals in RVNRL make it a suitable material for manufacturing of many kinds of latex products, especially those come into direct contact with users. This paper reveals and discusses the findings of cytotoxicity test and safety evaluation on animal for RVNRL. The test was done on RVNRL films prepared by coagulant dipping method and RVNRL dipped products produced by latex dipped product manufacturers. Cytotocixity test was carried out on mammalian cell culture American Type Culture Collection CCL 81, Vero. Results indicated that no cytotoxic effect from RVNRL films and products was found on the cell culture. Two animal studies, namely dermal sensitization study and primary skin irritation study, were done on gloves made from RVNRL. Albino white guinea pigs were used as test subjects in dermal sensitization study and results showed no sensitization induced by the application of test material in the guinea pigs. Primary skin irritation study was done on New Zealand white rabbits and results showed that the product tested was not corrosive and was not a primary irritant

Radiation prevulcanized natural rubber latex: Cytotoxicity and safety evaluation on animal

International Nuclear Information System (INIS)

Keong, C C; Zin, W M Wan; Ibrahim, P; Ibrahim, S

2010-01-01

Radiation prevulcanized natural rubber latex (RVNRL) was claimed to be more user friendly than natural rubber latex prevulcanized by sulphur curing system. The absence of Type IV allergy inducing chemicals in RVNRL make it a suitable material for manufacturing of many kinds of latex products, especially those come into direct contact with users. This paper reveals and discusses the findings of cytotoxicity test and safety evaluation on animal for RVNRL. The test was done on RVNRL films prepared by coagulant dipping method and RVNRL dipped products produced by latex dipped product manufacturers. Cytotocixity test was carried out on mammalian cell culture American Type Culture Collection CCL 81, Vero. Results indicated that no cytotoxic effect from RVNRL films and products was found on the cell culture. Two animal studies, namely dermal sensitization study and primary skin irritation study, were done on gloves made from RVNRL. Albino white guinea pigs were used as test subjects in dermal sensitization study and results showed no sensitization induced by the application of test material in the guinea pigs. Primary skin irritation study was done on New Zealand white rabbits and results showed that the product tested was not corrosive and was not a primary irritant

Radiation vulcanization of natural rubber latex (NRL) using low energy electron beam accelerator

International Nuclear Information System (INIS)

Feroza Akhtar; Keizo Makuuchi; Fumio Yoshii

1996-01-01

The electron beam induced vulcanization of natural rubber latex has been studied using low energy Electron Beam (EB) accelerators of 300, 250 and 175 keV ne latex was irradiated in a special type stainless steel reaction reactor with a stirrer at the bottom of the reactor. From the results it was found that 300 and 250 keV accelerators could effectively vulcanize NRL. But accelerator of 175 keV is too low energy to vulcanize the latex. At the same time a drum type irradiator where thin layer of NRL was irradiated by accelerator, was used for vulcanization of NRL. This type of irradiator also showed good physical properties of vulcanized latex. The effects of beam current and stirrer speed on vulcanization were studied

Use of electrical barriers to deter movement of round goby

Science.gov (United States)

Savino, Jacqueline F.; Jude, David J.; Kostich, Melissa J.; Coutant, Charles C.

2001-01-01

An electrical barrier was chosen as a possible means to deter movement of round goby Neogobius melanostomus. Feasibility studies in a 2.1-m donut-shaped tank determined the electrical parameters necessary to inhibit round goby from crossing the 1-m stretch of the benthic, electrical barrier. Increasing electrical pulse duration and voltage increased effectiveness of the barrier in deterring round goby movement through the barrier. Differences in activity of round goby during daytime and nocturnal tests did not change the effectiveness of the barrier. In field verification studies, an electrical barrier was placed between two blocking nets in the Shiawassee River, Michigan. The barrier consisted of a 6-m wide canvas on which were laid four cables carrying the electrical current. Seven experiments were conducted, wherein 25 latex paint-marked round goby were introduced upstream of the electrical barrier and recovered 24 h later upstream, on, and downstream of the barrier. During control studies, round goby moved across the barrier within 20 min from release upstream. With the barrier on and using the prescribed electrical settings shown to inhibit passage in the laboratory, the only marked round goby found below the barrier were dead. At reduced pulse durations, a few round goby (mean one/test) were found alive, but debilitated, below the barrier. The electrical barrier could be incorporated as part of a program in reducing movement of adult round goby through artificial connections between watersheds.

Agents and trends in health care workers' occupational asthma.

Science.gov (United States)

Walters, G I; Moore, V C; McGrath, E E; Burge, P S; Henneberger, P K

2013-10-01

There is a disproportionately high number of cases of work-related asthma occurring in health care occupations due to agents such as glutaraldehyde, latex and cleaning products. To understand the causes and measure trends over time of occupational asthma (OA) in health care workers (HCWs). We reviewed OA notifications from the Midland Thoracic Society's Surveillance Scheme of Occupational Asthma (SHIELD) database in the West Midlands, UK, from 1991 to 2011 and gathered data on occupation, causative agent and annual number of notifications. There were 182 cases of OA in HCWs (median annual notifications = 7; interquartile range [IQR] = 5-11), representing 5-19% of annual SHIELD notifications. The modal annual notification was 20 (in 1996); notifications have declined since then, in line with total SHIELD notifications. The majority of cases (136; 75%) occurred in nursing, operating theatre, endoscopy and radiology staff. The most frequently implicated agents were glutaraldehyde (n = 69), latex (n = 47) and cleaning products (n = 27), accounting for 79% of the 182 cases. Cleaning product-related OA was an emerging cause with 22 cases after 2001 and only 5 cases between 1991 and 2000. Control measures within the UK National Health Service have seen a decline in OA in HCWs due to latex and glutaraldehyde, though OA remains a problem amongst HCWs exposed to cleaning products. Continuing efforts are required to limit the number of cases in this employment sector.

Experimental investigation of the effect of latex solid/water ratio on latex modified co-matrix mechanical properties

Directory of Open Access Journals (Sweden)

Ahmed M. Diab

2013-03-01

Full Text Available Numerous researches were performed on latex modified concretes and associated properties, however; some vital factors were not given attention in previous works. This study focus on new factor which significantly affects the properties of latex modified cement paste, mortar or concrete. This factor is termed as ‘latex solid/water ratio’ which is defined herein as the ratio of weight of solid latex to weight of total water content of cement composite including the water in latex itself. The effect of this factor on some properties of cement paste, mortar and concrete were experimentally evaluated. Properties of cement paste include the produced calcium hydroxide and ettringite content during hydration process, while those of cement mortar take account of absorption and effect of temperature on compressive strength. Furthermore, the effect of this factor on the compressive and flexural strengths, modulus of elasticity, water penetration depth and drying shrinkage of concrete were explored. Based on experimental evidences, and spite of using different cement contents, sources of latex, water–cement ratios and slump values, it can be generally concluded that the latex solid/water ratio is a dominant factor affecting different properties of latex modified mortars and concrete.

Radiation-induced grafting polymerization of MMA onto polybutadiene rubber latex

International Nuclear Information System (INIS)

Peng Jing; Wang Maolin; Qiao Jinliang; Wei Genshuan

2005-01-01

The grafting of methyl methacrylate (MMA) onto polybutadiene rubber latex by the direct radiation method was carried out. The effects of monomer concentration, absorbed dose and dose rate of gamma rays on the grafting yield were investigated. The graft copolymers were characterized by transmission electron microscopy (TEM), FTIR spectroscopy, and differential scanning calorimetry. TEM photographs revealed that the core-shell structures of latex particles are formed at low MMA content, and with the increasing of MMA content, the semi-IPN-like structure with core-shell could be developed due to the high gel fraction of polybutadiene (PBD) seed particles. In addition, infrared analysis confirmed that MMA could be grafted onto PBD molecular chains effectively under appropriate irradiation conditions. The interfacial adhesion between PBD rubber (core) and PMMA (shell) phases could be enhanced with the increase of MMA concentration

Effect of gamma radiation dose and sensitizer on the physical properties of irradiated natural rubber latex

International Nuclear Information System (INIS)

Komgrit, R.; Thawat, C.; B, Tripob; Wirach, T.

2009-07-01

Full text: The vulcanization of natural rubber latex can be induced by gamma radiation, which enhances cross-linking within the rubber matrix. The purpose of this research is to investigate the effect of gamma radiation dose and sensitizers on the physical properties of irradiated natural rubber. Three sensitizers n-butyl acrylate (n-B A), tetrachloroethylene (C 2 Cl 4 ) and trichloromethane (CHCl 3 ) were mixed with natural rubber latex before irradiation with gamma ray dose varied from 14 to 22 kGy. Results showed that the mixture of three sensitizers with specific ratios effectively induced the cross-linking of natural rubber latex. The cross-linking ratio and improved physical properties increased with increasing gamma dose. Therefore, the mixture ratios of n-B A, C 2 Cl 4 and CHCl 3 have shown to be a critical parameter in the vulcanization of natural rubber latex by gamma radiation

Effects of radio sensitizers in the vulcanization of natural rubber latex induced by gamma radiation

International Nuclear Information System (INIS)

Souza, A. de; Canavel, V.; Araujo, S.C. de; Guedes, S.M.L.

1992-01-01

The effect of C Cl 4 and n-butyl acrylate as a sensitizer for radiation vulcanization of 60% DRC natural rubber latex with gamma rays, was studied relating tensile strength of vulcanized latex. The vulcanization dose is 200 kGy for natural rubber latex and it decreases to 40 kGy and to 9 kGy in the presence of C Cl 4 / potassium laureate and n-butyl acrylate / t-butyl hydroperoxide, respectively. The H 2 O 2 as a co-sensitizer does not change the efficiency of the combination of these sensitizers. The IV spectra show the formation of C=O after the irradiation as consequence of oxidation reactions. (author)

Preliminary study of semi-refined carrageenan (SRC) as secondary gelling agent in natural rubber (NR) latex foam

Science.gov (United States)

Norhazariah, S.; Azura, A. R.; Azahari, B.; Sivakumar, R.

2017-12-01

Semi-refined carrageenan (SRC) product is considerably cheaper and easier to produce as a natural polysaccharide, which was utilized in food and other product application. However, the application in latex is limited. The aim of this work is to evaluate the SRC produced from low industrial grade seaweed (LIGS) in the latex foam application. The FTIR spectra showed the SRC produced as kappa type carrageenan with lower sulfur content compared to native LIGS. NR latex foam is produced by using the Dunlop method with some modifications. The effect of SRC loading as a secondary gelling agent in NR latex foam is investigated. The density and morphology of the NR latex foam with the addition of the SRC are analyzed. NR latex foam density increased with SRC loading and peaked at 1.8 phr SRC. The addition of SRC has induced the bigger cell size compared to the cell size of the control NR latex foam, as shown in the optical micrograph. It can be concluded that SRC LIGS could be acted as secondary gelling agent in NR latex foam.

Occupational contact urticaria: lessons from the French National Network for Occupational Disease Vigilance and Prevention (RNV3P).

Science.gov (United States)

Bensefa-Colas, L; Telle-Lamberton, M; Faye, S; Bourrain, J-L; Crépy, M-N; Lasfargues, G; Choudat, D; Momas, I

2015-12-01

Occupational contact urticaria (OCU) is an occupational contact dermatitis that can cause serious health consequences and disability at work. To describe OCU and its temporal trends by the main causal agents and activity sectors in a nationwide scheme in France. Using data from the French National Network for Occupational Disease Vigilance and Prevention (RNV3P), we described OCU reported during the period 2001-10 and analysed the temporal trends of OCU and OCU attributed to the most frequent agents over the study period. Trends analyses were supported by reporting odds ratios using a logistic regression model with reference to 2001, or with time as a continuous variable. During the study period, 251 cases of OCU were reported in RNV3P, half of which were due to natural rubber latex, in particular in the health and social work activity sector (HSW). The number of these cases declined significantly over the study period (19% per year), and particularly after 2006. Conversely, the other causes of OCU did not decrease. Using surveillance data from a French national network, this study has found that there was a significant decline in OCU due to natural rubber latex, particularly in the HSW, when powdered latex gloves were banned from French hospitals. Our results show the effectiveness of this preventive measure, and suggest that this practice should be extended to other sectors. © 2015 British Association of Dermatologists.

Agents and trends in health care workers' occupational asthma

Science.gov (United States)

Walters, G. I.; Moore, V. C.; McGrath, E. E.; Burge, P. S.; Henneberger, P. K.

2015-01-01

Background There is a disproportionately high number of cases of work-related asthma occurring in health care occupations due to agents such as glutaraldehyde, latex and cleaning products. Aims To understand the causes and measure trends over time of occupational asthma (OA) in health care workers (HCWs). Methods We reviewed OA notifications from the Midland Thoracic Society's Surveillance Scheme of Occupational Asthma (SHIELD) database in the West Midlands, UK, from 1991 to 2011 and gathered data on occupation, causative agent and annual number of notifications. Results There were 182 cases of OA in HCWs (median annual notifications = 7; interquartile range [IQR] = 5–11), representing 5–19% of annual SHIELD notifications. The modal annual notification was 20 (in 1996); notifications have declined since then, in line with total SHIELD notifications. The majority of cases (136; 75%) occurred in nursing, operating theatre, endoscopy and radiology staff. The most frequently implicated agents were glutaraldehyde (n = 69), latex (n = 47) and cleaning products (n = 27), accounting for 79% of the 182 cases. Cleaning product-related OA was an emerging cause with 22 cases after 2001 and only 5 cases between 1991 and 2000. Conclusions Control measures within the UK National Health Service have seen a decline in OA in HCWs due to latex and glutaraldehyde, though OA remains a problem amongst HCWs exposed to cleaning products. Continuing efforts are required to limit the number of cases in this employment sector. PMID:23933593

Comparative study on plant latex particles and latex coagulation in Ficus benjamina, Campanula glomerata and three Euphorbia species.

Directory of Open Access Journals (Sweden)

Georg Bauer

Full Text Available Among latex-producing plants, mainly the latex of Hevea brasiliensis has been studied in detail so far, while comprehensive comparative studies of latex coagulation mechanisms among the more than 20,000 latex-bearing plant species are lacking. In order to give new insights into the potential variety of coagulation mechanisms, the untreated natural latices of five latex-bearing plants from the families Euphorbiaceae, Moraceae and Campanulaceae were visualised using Cryo-SEM and their particle size compared using the laser diffraction method. Additionally, the laticifers of these plants species were examined in planta via Cryo-SEM. Similar latex particle sizes and shape were found in Ficus benjamina and Hevea brasiliensis. Hence, and due to other similarities, we hypothesize comparable, mainly chemical, coagulation mechanisms in these two species, whereas a physical coagulation mechanism is proposed for the latex of Euphorbia spp. The latter mechanism is based on the huge amount of densely packed particles that after evaporation of water build a large surface area, which accelerates the coagulation procedure.

Content of Asthmagen Natural Rubber Latex Allergens in Commercial Disposable Gloves.

Science.gov (United States)

Bittner, C; Garrido, M V; Krach, L H; Harth, V

The use of natural rubber latex (NRL) gloves in many occupations may lead to latex sensitization, allergic asthma, and skin reactions. Due to their good properties and environmental safety NRL gloves are still being used in the healthcare setting, but also in the food industry, by hairdressers, cleaners, etc. The aim of our study was to assess the protein and NRL allergen content in commercial gloves by different methods, including a new assay. Twenty commercially available NRL gloves were analyzed. Protein extraction was performed according to the international standard ASTM D-5712. Total protein content was measured with a modified Lowry method, NRL content with the CAP Inhibition Assay, the Beezhold ELISA Inhibition Assay, and an innovative ELISA with IgY-antibodies extracted from eggs of NRL-immunized hens (IgY Inhibition Assay). We found a high protein content in a range of 215.0-1304.7 μg/g in 8 out of the 20 NRL gloves. Seven of the 20 gloves were powdered, four of them with a high protein content. In gloves with high protein content, the immunological tests detected congruently high levels of NRL allergen. We conclude that a high percentage of commercially available NRL gloves still represent a risk for NRL allergy, including asthma. The modified Lowry Method allows to infer on the latex allergen content.

Opportunities and obstacles in translating evidence to policy in occupational asthma.

Science.gov (United States)

Tarlo, Susan M; Arif, Ahmed A; Delclos, George L; Henneberger, Paul; Patel, Jenil

2018-06-01

Occupational asthma (OA), a common respiratory disorder in Western countries, is caused by exposures at the workplace. It is part of a broader definition of work-related asthma (WRA) that also includes pre-existing asthma aggravated by substances present in the workplace environment, and it is potentially preventable. The purpose of this paper is to illustrate preventive measures for occupational asthma by case studies. In three case studies we discuss preventive measures that have been associated with reductions in incidence of occupational asthma from natural rubber latex and from diisocyanates as supported by published literature. We also discuss challenges in relation to asthma from cleaning products in healthcare work. Several preventive measures have been associated with reduction in incidence of occupational asthma from natural rubber latex and from diisocyanates, and may provide lessons for prevention of other causes of occupational asthma. Cleaning products remain an unresolved problem at present with respect to asthma risks but potential measures include the use of safer products and safer applications such as avoidance of spray products, use of occupational hygiene methods such as improving local ventilation, and when appropriate, the use of personal protective devices. Copyright © 2017 Elsevier Inc. All rights reserved.

[Latex allergy in a population at risk].

Science.gov (United States)

Ruiz Fernández, M; Flores Sandoval, G; Orea Solano, M

1999-01-01

The allergy to latex is an illness whose prevalence has been increased in very significant form in the last years. To know the allergy incidence to latex in population of risk, as well as to identify the related sintomatology and the importance or paper that play the atopia antecedents and time of contact with latex for the development of the illness. We carry out a prospective, descriptive, experimental and traverse study in population of risk, in the service of Allergy and clinical Immunology of the Hospital Regional Lic. Adolfo López Mateos, ISSSTE. One hundred patients of both sexes were included, with age of 20 to 50 years, with the antecedent of being personal medical and paramedic and to have presented contact with latex material in a minimum period of one year. They were carried out clinical history with registration of sintomatology nasal, bronchial, cutaneous and associated to contact with latex. They were carried out cutaneous test for prick to latex with positive control with the help of histamine solution and negative control with solution of Evans and immediate reading of the same one. 22% of the patients in study, they presented positive skin test latex, with a time of exhibition 10 year-old average, 68% presented antecedent of atopy personal, family and, likewise the associate sintomatology was in a 33.3% dermatology, 54.5 nasal, nobody presented bronchial symptoms and a 9% asymptomatic was reported. We support that the immediate skin test latex for Prick is an important parameter of support diagnosis for allergy to type 1 latex.

Nitrile versus Latex for Glove Juice Sampling.

Science.gov (United States)

Landers, Timothy F; Dent, Anthony

2014-01-01

The objective of this study was to explore the utility of nitrile gloves as a replacement for latex surgical gloves in recovering bacteria from the hands. Two types of nitrile gloves were compared to latex gloves using the parallel streak method. Streaks of Klebsiella pneumoniae and Staphylococcus aureus were made on tryptic soy agar plates, and the zones of inhibition were measured around pieces of glove material placed on the plates. Latex gloves produced a mean zone of inhibition of 0.28 mm, compared to 0.002 mm for nitrile gloves (pnitrile may be a viable alternative to latex in glove juice sampling methods, since nitrile avoids the risk of latex exposure.

Latex allergy: assessment of knowledge, appropriate use of gloves and prevention practice among hospital healthcare workers.

Science.gov (United States)

Al-Niaimi, F; Chiang, Y Z; Chiang, Y N; Williams, J

2013-01-01

Healthcare workers and patients are often exposed to natural rubber latex (NRL) through contact with gloves and various healthcare products, which can potentially cause allergic reactions, with varying degrees of severity. In 2008, the Royal College of Physicians published their first evidence-based guidance on occupational health interventions for latex allergy, which emphasized the importance of healthcare workers having knowledge of latex allergy. This study aimed to survey the knowledge of healthcare workers (n = 156) about latex gloves and NRL allergy, routine prevention practice and the appropriate use of gloves in patient care. Healthcare workers in a large teaching hospital were surveyed using a standard questionnaire. We found that only 1% of healthcare workers were able to correctly match the appropriate gloves to the specifically designed procedure. More than half (n = 74.53%) were unable to recognize the presentation of type 1 allergy to NRL. Of the 156 participants, 131 (84%) considered that they would benefit from training about NRL allergy and the use of different types of gloves in clinical care. This survey indicates the importance of education regarding appropriate use of gloves and prevention of NRL allergy among healthcare workers, and dermatologists should play an important role in facilitating this. © The Author(s). CED © 2012 British Association of Dermatologists.

Latex improvement of recycled asphalt pavement

Science.gov (United States)

Drennon, C.

1982-08-01

The performance of a single unmodified milled recycled asphalt concrete was compared to milled asphalt concrete modified by addition of three types of rubber latex. Latex was added at 2, 3, 5, and 8 percent latex by weight of asphalt in the asphalt concrete. Lattices used were a styrene butadiene (SBR), a natural rubber (NR), an acrylonitrile butadiene (NBR), and four varieties of out of specification SBR lattices. Marshall tests, while indecisive, showed a modest improvement in properties of SBR and NR added material at 3 and 5 percent latex. Addition of NBR latex caused deterioration in Marshall stability and flow over that of control. Repeated load tests were run using the indirect tensile test, analyzed by the VESYS program, which computes life of pavements. Repeated load tests showed improvement in asphalt concrete life when 3 and 5 percent SBR was added. Improvement was also shown by the out of specification SBR.

Cryo-SEM studies of latex/ceramic nanoparticle coating microstructure development.

Science.gov (United States)

Luo, Hui; Scriven, L E; Francis, Lorraine F

2007-12-15

Cryogenic scanning electron microscopy (cryo-SEM) was used to investigate microstructure development of composite coatings prepared from dispersions of antimony-doped tin oxide (ATO) nanoparticles (approximately 30 nm) or indium tin oxide (ITO) nanoparticles (approximately 40 nm) and latex particles (polydisperse, D(v): approximately 300 nm). Cryo-SEM images of ATO/latex dispersions as-frozen show small clusters of ATO and individual latex particles homogeneously distribute in a frozen water matrix. In contrast, cryo-SEM images of ITO/latex dispersions as-frozen show ITO particles adsorb onto latex particle surfaces. Electrostatic repulsion between negatively charged ATO and negatively charged latex particles stabilizes the ATO/latex dispersion, whereas in ITO/latex dispersion, positively charged ITO particles are attracted onto surfaces of negatively charged latex particles. These results are consistent with calculations of interaction potentials from past research. Cryo-SEM images of frozen and fractured coatings reveal that both ceramic nanoparticles and latex become more concentrated as drying proceeds; larger latex particles consolidate with ceramic nanoparticles in the interstitial spaces. With more drying, compaction flattens the latex-latex particle contacts and shrinks the voids between them. Thus, ceramic nanoparticles are forced to pack closely in the interstitial spaces, forming an interconnected network. Finally, latex particles partially coalesce at their flattened contacts, thereby yielding a coherent coating. The research reveals how nanoparticles segregate and interconnect among latex particles during drying.

Type I allergy to natural rubber latex and type IV allergy to rubber chemicals in health care workers with glove-related skin symptoms.

Science.gov (United States)

Nettis, E; Assennato, G; Ferrannini, A; Tursi, A

2002-03-01

It has been established that there are type I and type IV allergens in latex gloves. The purpose of the study was to establish the prevalence of rubber glove-induced skin symptoms among health care workers in one Italian hospital. Health care workers (n = 1584) were evaluated using a written questionnaire and 295 respondents with glove-induced skin symptoms were tested. We performed: skin prick test with latex glove extract and commercial latex, and environmental and food allergens; glove use test; patch tests with a rubber additive series; and RASTs. Hospital employees who used or had used latex gloves at work were 1294. Three hundred and sixteen (24.4%) reported glove-induced symptoms, namely, cutaneous symptoms in all the cases and non-cutaneous symptoms in 105 subjects (8.1%). Twenty-seven of the 295 symptomatic employees tested (9.1%) were latex sensitive. Thirty-one patients (10.5%) exhibited positive patch test to rubber-related allergens. The most positive readings were obtained from the Thiuram mix and the Carba mix, with 12 and 9 positivities, respectively. The risk factors for latex skin sensitization were: a previous history of atopy and asthma; history of surgery; pre-existing hand dermatitis; work-related symptoms; and positive skin tests to common inhalant and certain foods (P skin complaints of latex gloves are related to skin irritation rather than to allergy. The immediate allergy to latex and the delayed allergy to rubber chemicals suggest that all the health care workers with glove-related dermatitis should undergo both skin prick test and glove use test to detect type I hypersensitivity to latex, and patch test to detect type IV hypersensitivity to rubber chemicals.

Exploiting epoxidized natural rubber latex (ENRL) as a starting raw material for latex-based products

Science.gov (United States)

Siti Nor Qamarina, M.; Fatimah Rubaizah, M. R.; Nurul Suhaira, A.; Norhanifah, M. Y.

2017-12-01

Epoxidized natural rubber latex (ENRL) is a chemically modified natural rubber latex produced from epoxidation process that involves usage of organic peracids. Conversion of the ENRL into dry rubber products has been known to exhibit many beneficial properties, however limited published works were found on diversifiying the ENRL latex-based products applications. In this preliminary work, different source of raw materials and neutralization systems were investigated. The objective was to explore possibilities in producing distinctive ENRL. Findings have demonstrated that different source of raw materials and neutralization systems influenced the typical ENRL specifications, stability behavior and particle size distribution. Morphological observations performed on these ENRL systems appeared to agree with the ENRL characteristics achieved. Since experimenting these two main factors resulted in encouraging ENRL findings, detailed work shall be further scrutinized to search for an optimum condition in producing marketable ENRL specifically for latex-based products applications.

Emotion with tears decreases allergic responses to latex in atopic eczema patients with latex allergy.

Science.gov (United States)

Kimata, Hajime

2006-07-01

Allergic responses are enhanced by stress, whereas they are reduced by laughter in atopic eczema patients. Emotion with tears decreases plasma IL-6 levels in patients with rheumatoid arthritis. Thus, the effect of emotion with tears on allergic responses in patients with atopic eczema was studied. Sixty patients with atopic eczema having latex allergy viewed both the weather information video and the heart-warming movie, Kramer vs. Kramer. Just before and immediately after viewing each video, allergic responses to latex were measured. Viewing the weather information video did not cause emotion with tears in any patients, and it failed to modulate allergic responses. In contrast, viewing Kramer vs. Kramer caused emotion with tears in 44 of 60 patients, and it reduced allergic skin wheal responses to latex and latex-specific IgE production in them. Emotion with tears reduced allergic responses, and it may be useful in the treatment of allergic diseases.

Experimental study on the drying of natural latex medical gloves

Science.gov (United States)

Chankrachang, Mano; Yongyingsakthavorn, Pisit; Tohsan, Atitaya; Nontakaew, Udomkiat

2018-01-01

The purpose of this research was to study latex film drying at 70 °C using a laboratory drying oven. Two different total solid content (TSC) latex compounds, which 45% TSC and 35% TSC were used. The undried latex films were prepared according to the common procedures used in latex gloves manufacturers, that is, by dry coagulant dipping process. The experimental results such as initial moisture content, the amount of moisture and drying time of latex films in each latex compound formula were determined. After that, the results were projected to calculate on the production capacity expand by 1 million piece/day of natural latex medical gloves. Finally, the rate of moisture entering the latex drying oven and the energy consumption of the drying oven were estimated. The results indicated that when the 35% TSC of latex compound was used. The initial moisture content of latex film was higher than 45% TSC of latex compound about 7%. The drying time of 35% TSC was longer than 45% TSC for 2.5 min and consume more energy about 10%. As a result, the 45% TSC latex compound was the better way to saving energy and managing humidity in the production line. Therefore, it was found to very useful to an approximate design length and size of actual of latex drying oven and the rate of moisture entering the oven as well.

Nitrile versus Latex for Glove Juice Sampling.

Directory of Open Access Journals (Sweden)

Timothy F Landers

Full Text Available The objective of this study was to explore the utility of nitrile gloves as a replacement for latex surgical gloves in recovering bacteria from the hands. Two types of nitrile gloves were compared to latex gloves using the parallel streak method. Streaks of Klebsiella pneumoniae and Staphylococcus aureus were made on tryptic soy agar plates, and the zones of inhibition were measured around pieces of glove material placed on the plates. Latex gloves produced a mean zone of inhibition of 0.28 mm, compared to 0.002 mm for nitrile gloves (p<.001. While the parallel streak method is not intended as a quantitative estimate of antimicrobial properties, these results suggest that nitrile may be a viable alternative to latex in glove juice sampling methods, since nitrile avoids the risk of latex exposure.

Production Of Hollow Toy Product From Radiation Pre vulcanized Natural Rubber Latex (RVNRL) By Using Casting And Moulding Technique

International Nuclear Information System (INIS)

Mohd Noorwadi Mat Lazim; Sofian Ibrahim; Muhammad Saiful Omar

2013-01-01

Hollow toy products are very synonym to the child from the age of months since it able to stimulating each of their sense such as sight, hearing, taste, touch and smell. Most of hollow toy products are made from natural rubber latex by using moulding and casting technique. The moulding and casting technique is a manufacturing process by pored liquid latex into a mould, which contain cavity of the desired shape. The mould made from plaster of Paris able to absorbs water from latex meanwhile the presence of calcium ions from plaster of Paris will tend to diffuse into latex thus promote formation of deposit on surface of cavity mould. To improve the quality and safety of hollow toy product made from latex, Radiation Pre vulcanized Natural Rubber Latex (RVNRL) has been identified to be used because it can fulfill the standard requirement for latex and also due to its special abilities such as lower modulus (soft latex products), nitrosamines free, low in nitrosatables, free from chemical accelerators induced allergies and better biodegradability. This paper identify the problem appears from the process of making hollow toy products from RVNRL by using moulding and casting technique. (author)

Vulcanization of polybutadiene latex induced by 60Co γ-rays irradiation

International Nuclear Information System (INIS)

Liu Yuguang; Huang Yudong; Hou Jing; Gao Deyu; Zhang Xuequan

2007-01-01

Fully vulcanized polybutadiene rubber particles (FVBR) were prepared by polybutadiene latex (PBL) vulcanization induced by 60 Co γ-rays irradiation, and the effect of absorbed dose on crosslinking behavior was studied. Mean diameter, diameter distribution and morphology of the particles in the PBL irradiated at different doses as well as in the FVBR were characterized by laser particle analyzer and AFM. The crosslinking effect on the mechanical properties of the films, by casting from PBL at different doses correspondingly, was evaluated by mechanical and dynamic mechanical analysis (DMA) respectively. The results showed that the diameter and swelling property decreased with absorbed dose, while crosslink density and gel fraction increased. Moreover, the decrease of the tensile strength and elongation at break, the increase of the hardness in shore A and young's modulus (E), and the increase of storage modulus (E') and narrowing of loss tangent peak (Tan 8) were all accounted for the increment of crosslinking. The Charlesby-Pinner equation fits well with the PBL vulcanization in the range of absorbed doses from 0 to 200kGy. (authors)

Latex and friends

CERN Document Server

Dongen, M R C van

2012-01-01

LaTeX is a free, automated state-of-the-art typesetting system. This book teaches all the ins and outs of LaTeX which are needed to write an article, report, thesis, or book. The book teaches by example, giving many worked out examples showing input and output side by side. The book presents the most recent techniques for presenting data plots, complex graphics, and computer presentations, but does not require previous knowledge. However, it is also a reference for the more seasoned user, with pointers to modern techniques and packages. Recurring themes in the book are consistent and effective

Cement-latex grouting mortar for cementing boreholes

Energy Technology Data Exchange (ETDEWEB)

Kateev, I S; Golyshkina, L A; Gorbunova, I V; Kurochkin, B M; Vakula, Ya V

1980-01-01

The need for the development of cement-latex grouting mortar for the purpose of separating strata when reinforcing boreholes at deposits in the Tatar Associated SSR is evaluated. Results of studies of the physical and mechanical properties of cement-latex grouting mortar systems (mortar plus brick) are presented. Formulas for preparing cement-latex grouting mortor are evaluated and results of industrial tests of such mortars shown.

Safety Evaluation Test on Human for Radiation Pre vulcanised Natural Rubber Latex (RVNRL)

International Nuclear Information System (INIS)

Pairu Ibrahim; Wan Manshol Wan Zain; Chai, Chee Keong; Sofian Ibrahim; Saadiah Sulaiman; Sharifah Ismail

2010-01-01

This paper discussed about clinical test conducted to determine safety evaluations on human for latex examination gloves and latex films made from Radiation Vulcanized Natural Rubber Latex (RVNRL). Two types of test were being adopted which are i) Modified Draize-95 test and ii) Patch Test on Sensitized Individuals. Modified Draize-95 test was conducted on 200 non-sensitized human subjects and Patch Test on Sensitized Individuals was conducted on 25 individuals who are allergic to the defined major chemical sensitizer presents in natural rubber product. It was found that Modified Draize-95 test has prove that there is no clinical evidence on the presence of residual chemical additives at the level that may induce Type IV allergy in the un sensitized general user population in the RVNRL gloves. Meanwhile Patch Test on Sensitized Individuals has proved that the patch test conducted using the test article on 25 individuals who are allergic to the defined major chemical sensitizers present in natural rubber products, thiuram, carbamates or thiazoles produced a negative response, meeting the pre requirement for the claim of reduced reaction-inducing potential. (author)

Jackfruit anaphylaxis in a latex allergic patient.

Science.gov (United States)

Wongrakpanich, Supakanya; Klaewsongkram, Jettanong; Chantaphakul, Hiroshi; Ruxrungtham, Kiat

2015-03-01

Several fruits have been reported to crossreact with latex antigen in latex allergy patients but little is known regarding tropical fruits in particular. Here we report the case of a 34-year old nurse who developed anaphylaxis following the ingestion of dried jackfruit (Artocarpus heterophyllus). The patient had a history of chronic eczema on both hands resulting from a regular wear of latex gloves. She and her family also had a history of atopy (allergic rhinitis and/or atopic dermatitis). The results of skin prick tests were positive for jackfruit, latex glove, kiwi and papaya, but the test was negative for banana. While we are reporting the first case of jackfruit anaphylaxis, further research needs to be conducted to identify the mechanisms underlying it. In particular, in-vitro studies need to be designed to understand if the anaphylaxis we describe is due to a cross reactivity between latex and jackfruit or a coincidence of allergy to these 2 antigens.

A novel arctigenin-containing latex glove prevents latex allergy by inhibiting type I/IV allergic reactions.

Science.gov (United States)

Wang, Yong-Xin; Xue, Dan-Ting; Liu, Meng; Zhou, Zheng-Min; Shang, Jing

2016-03-01

The present study aimed at developing a natural compound with anti-allergic effect and stability under latex glove manufacturing conditions and investigating whether its anti-allergic effect is maintained after its addition into the latex. The effects of nine natural compounds on growth of the RBL-2H3 cells and mouse primary spleen lymphocytes were determined using MTT assay. The compounds included glycyrrhizin, osthole, tetrandrine, tea polyphenol, catechin, arctigenin, oleanolic acid, baicalin and oxymatrine. An ELISA assay was used for the in vitro anti-type I/IV allergy screening; in this process β-hexosaminidase, histamine, and IL-4 released from RBL-2H3 cell lines and IFN-γ and IL-2 released from mouse primary spleen lymphocytes were taken as screening indices. The physical stability of eight natural compounds and the dissolubility of arctigenin, selected based on the in vitro pharnacodynamaic screening and the stability evaluation, were detected by HPLC. The in vivo pharmacodynamic confirmation of arctigenin and final latex product was evaluated with a passive cutaneous anaphylaxis (PCA) model and an allergen-specific skin response model. Nine natural compounds showed minor growth inhibition on RBL-2H3 cells and mouse primary spleen lymphocytes. Baicalin and arctigenin had the best anti-type I and IV allergic effects among the natural compounds based on the in vitro pharmacodynamic screening. Arctigenin and catechin had the best physical stability under different manufacturing conditions. Arctigenin was the selected for further evaluation and proven to have anti-type I and IV allergic effects in vivo in a dose-dependent manner. The final product of the arctigenin-containing latex glove had anti-type I and IV allergic effects in vivo which were mainly attributed to arctigenin as proved from the dissolubility results. Arctigenin showed anti-type I and IV allergic effects in vitro and in vivo, with a good stability under latex glove manufacturing conditions

Synthesis and characterization of novel polyacid-stabilized latexes.

Science.gov (United States)

Yang, Pengcheng; Armes, S P

2012-09-18

A series of novel polyacid macromonomers based on 2-hydroxypropyl methacrylate (HPMA) were prepared by atom transfer radical polymerization (ATRP) via a two-step route. First, a range of well-defined PHPMA homopolymer precursors were synthesized by ATRP using a tertiary amine-functionalized initiator, 2-(dimethylamino)ethyl-2-bromoisobutyrylamide, and a CuCl/2, 2'-bipyridine (bpy) catalyst in alcoholic media at 50 °C. ATRP polymerizations were relatively slow and poorly controlled in pure isopropanol (IPA), especially when targeting higher degrees of polymerization (DP > 30). Improved control was achieved by addition of water: low polydispersity (M(w)/M(n) propyl methacrylate) (PSPMA) macromonomers by quaternizing the tertiary amine end-group with excess 4-vinylbenzyl chloride, followed by esterification of the pendent hydroxyl groups using excess succinic anhydride at 20 °C. These polyacid macromonomers were evaluated as reactive steric stabilizers for polystyrene latex synthesis under either aqueous emulsion polymerization or alcoholic dispersion polymerization conditions. Near-monodisperse polystyrene latexes were obtained via aqueous emulsion polymerization using 10 wt % PSPMA macromonomer (with respect to styrene monomer) with various initiators as evidenced by scanning electron microscopy, disk centrifuge photosedimentometry and light scattering studies. PSPMA macromomer concentrations as low as 1.0 wt % also produced near-monodisperse latexes, suggesting that these PSPMA macromonomers are highly effective stabilizers. Alcoholic dispersion polymerization of styrene conducted in various ethanol/water mixtures with 10 wt % PSPMA(50) macromonomer produced relatively large near-monodisperse latexes. Increasing the water content in such formulations led to smaller latexes, as expected. Control experiments conducted with 10 wt % PSPMA(50) homopolymer produced relatively large polydisperse latexes via emulsion polymerization and only macroscopic precipitates via

The preparation of RVNRL using Malaysian-produced latexes

International Nuclear Information System (INIS)

Zin, W.M. bin W.; Mohid, N. bte; Hasan, J. bin; Noor, W.K.A. bte W.M.; Jaafar, Zulkifli

1993-01-01

This research project was carried out using latexes supplied by three of the suppliers in Malaysia. From the results of studies carried out in search of the best sensitiser for RVNRL preparation, the use of n-butyl acrylate (n-BA) as a sensitiser gave the most promising results. However, its use as a sensitiser is not universal to all latexes available in the country. The problem was overcome by using different formulations for different latexes. For the latex supplied by Golden Hope (Hytex), a combination of sensitisers i.e. n-BA plus 2-ethyl hexyl acrylate (2-EHA) with a 10% potassium hydroxide solution as the stabilizer, was required. Latex supplied by MARDEC (Matex), seemed to need only n-BA as the sensitiser. However, a stabilizer was still required and the use of a 10% KOH solution was found to be suitable. A large range of stabilizers and sensitisers were applicable to Guthrie latex. The use of n-BA as the sensitiser and potassium laurylic acid as the stabilizer seemed the most favourable formulation. All the results are discussed in the form of a correlation between dose and the tensile properties of RVNRL vulcanizates, equilibrium swelling ratio and standing time of the latex formulation. (author)

Mixed chemical-induced oxidative stress in occupational exposure ...

African Journals Online (AJOL)

Mixed chemical-induced oxidative stress in occupational exposure in Nigerians. JI Anetor, SA Yaqub, GO Anetor, AC Nsonwu, FAA Adeniyi, S Fukushima. Abstract. Exposure to single chemicals and associated disorders in occupational environments has received significant attention. Understanding these events holds ...

Plant latex lipase as biocatalysts for biodiesel production | Mazou ...

African Journals Online (AJOL)

Plant latex lipase as biocatalysts for biodiesel production. ... This paper provides an overview regarding the main aspects of latex, such as the reactions catalyzed, physiological functions, specificities, sources and their industrial applications. Keywords: Plant latex, lipase, Transesterification, purification, biodiesel ...

Ten years incidence of natural rubber latex sensitization and symptoms in a prospective cohort of health care workers using non-powdered latex gloves 2000-2009.

Science.gov (United States)

Larese Filon, Francesca; Bochdanovits, Letizia; Capuzzo, Chiara; Cerchi, Roberto; Rui, Francesca

2014-07-01

To assess the incidence of sensitization and gloves-related symptoms in 10-year follow-up in a group of health care workers (9,660 person-years) using non-powdered latex gloves from 2000 to 2009 and to examine related factors. We studied 2,053 health care workers in Trieste Hospitals by means of skin prick test for latex extract, patch tests and medical examinations. We report the incidence of latex sensitization among workers using non-powdered latex gloves. The incidence of latex sensitization, rhinitis, asthma, urticaria, irritant and allergic contact dermatitis were 1.0; 0.12; 0.21; 0.72; 2.39 and 2.50 cases per 1,000 person-years, respectively. Respiratory symptoms and urticaria were positively related with latex sensitization (OR = 8.0; 95 % CL 1.27-48.6), with common allergic respiratory symptoms (OR = 4.19; 95 % CL 1.04-16.8) and with familial atopy (OR = 4.47; 95 % CL 1.1-17.9). The incidence of latex sensitization and latex-related symptoms were very low but subjects with allergic symptoms related to common allergens are at higher risk. The use of non-latex gloves is suggested for them.

More math into Latex

CERN Document Server

Grätzer, George

2007-01-01

For close to two decades, Math into Latex has been the standard introduction and complete reference for writing articles and books containing mathematical formulas. In this fourth edition, the reader is provided with important updates on articles and books. An important new topic is discussed: transparencies (computer projections). Key features of More Math into Latex, 4th edition: Installation instructions for PC and Mac users; An example-based, visual approach and a gentle introduction with the Short Course; A detailed exposition of multiline math formulas with a Visual Guide; A unified appr

Recombinant albumin monolayers on latex particles.

Science.gov (United States)

Sofińska, Kamila; Adamczyk, Zbigniew; Kujda, Marta; Nattich-Rak, Małgorzata

2014-01-14

The adsorption of recombinant human serum albumin (rHSA) on negatively charged polystyrene latex micro-particles was studied at pH 3.5 and the NaCl concentration range of 10(-3) to 0.15 M. The electrophoretic mobility of latex monotonically increased with the albumin concentration in the suspension. The coverage of adsorbed albumin was quantitatively determined using the depletion method, where the residual protein concentration was determined by electrokinetic measurements and AFM imaging. It was shown that albumin adsorption was irreversible. Its maximum coverage on latex varied between 0.7 mg m(-2) for 10(-3) M NaCl to 1.3 mg m(-2) for 0.15 M NaCl. The latter value matches the maximum coverage previously determined for human serum albumin on mica using the streaming potential method. The increase in the maximum coverage was interpreted in terms of reduced electrostatic repulsion among adsorbed molecules. These facts confirm that albumin adsorption at pH 3.5 is governed by electrostatic interactions and proceeds analogously to colloid particle deposition. The stability of albumin monolayers was measured in additional experiments where changes in the latex electrophoretic mobility and the concentration of free albumin in solutions were monitored over prolonged time periods. Based on these experimental data, a robust procedure of preparing albumin monolayers on latex particles of well-controlled coverage and molecule distribution was proposed.

Effect of Amphiphilic Alkyl Chain Length Upon Purified LATEX Stability

International Nuclear Information System (INIS)

Amira Amir Hassan; Amir Hashim Mohd Yatim

2015-01-01

Rubber particles in purified latex (PL) are stabilized by a film of protein and fatty acid soap (surfactant). Saturated straight-chain fatty acid soaps can assist an enhancement of latex stability. However, whether the alkyl chain length plays an important role in increasing the stability is still an issue. The aim of this study is to investigate the effect of alkyl chain length of anionic surfactant on the stability of purified latex. The fatty acid soap of decanoate (9), laurate (11), sodium dodecyl sulphate (SDS) (12) and palmitate (15) were used. The numbers in parentheses indicating the number of carbon present in alkyl chain of the soap. The results showed that the impact of alkyl chain length on the stability of latex is in the order of laurate > decanoate > SDS > palmitate > purified latex accordingly. The alkyl chain length does giving a significant effect on latex stability after longer stirring time. The particle size of latex with the presence of surfactant is greater compare to a single particle itself due to extension of particles diameter. Thus suitable interaction of the nonpolar tail of surfactant with the hydrophobic regions of latex surface played a major role in maintaining a stable latex system. (author)

Anticancer activity of flavonol and flavan-3-ol rich extracts from Croton celtidifolius latex.

Science.gov (United States)

Biscaro, Fernanda; Parisotto, Eduardo Benedetti; Zanette, Vanilde Citadini; Günther, Tania Mara Fischer; Ferreira, Eduardo Antonio; Gris, Eliana Fortes; Correia, João Francisco Gomes; Pich, Claus Tröger; Mattivi, Fulvio; Filho, Danilo Wilhelm; Pedrosa, Rozangela Curi

2013-06-01

Croton celtidifolius Baill (Euphorbiaceae) is a tree found in the Atlantic Forest in Southern Brazil, where it is commonly known as "Sangue-de-Dragão". Its red latex is used traditionally for treating ulcers, diabetes and cancer. To evaluate antitumor activities of Croton celtififolius latex in vitro and in vivo. Phytochemical analyses were conducted using HPLC-DAD-MS. Cytotoxic, nuclease and pro-apoptotic properties were determined using the tetrazolium salt assay (MTT), plasmid DNA damage assay and ethidium bromide (EB)/acridine orange methods, respectively, and antitumor activity was determined in the Ehrlich ascites carcinoma (EAC) mouse model. Phytochemical studies indicated a high phenol content of flavonols (45.67 ± 0.24 and 18.01 ± 0.23 mg/mL of myricetin and quercetin, respectively) and flavan-3-ols (114.12 ± 1.84 and 1527.41 ± 16.42 mg/L of epicatechin and epigallocatechin, respectively) in latex. These compounds reduced MCF-7 and EAC cell viability in the MTT assay (IC50 = 169.0 ± 1.8 and 187.0 ± 2.2 μg/mL, respectively). Latex compounds caused significant DNA fragmentation and increased the number of apoptotic cells (negative control (NC), 12%; latex, 41%) as indicated by differential staining in the EB/acridine orange assay. The in vivo latex treatment at 3.12 mg/kg/day reduced the body weight by 7.57 ± 2.04 g and increased median survival time to 17.5 days when compared to the NC group (13.0 days). In addition, the highest latex concentration inhibited tumor growth by 56%. These results agree with ethno-pharmacological reports showing cytotoxicity and antitumor activity of C. celtidifolius latex. The mechanism of antitumor action may be related to direct DNA fragmentation that reduces survival and induces apoptosis.

Occupational allergic contact dermatitis in a 2-year follow-up study

DEFF Research Database (Denmark)

Brok, Line; Clemmensen, Kim Katrine Bjerring; Carøe, Tanja Korfitsen

2016-01-01

BACKGROUND: Patch testing is mandatory for diagnosing contact dermatitis. It is, however, crucial that patients understand and remember the result of the test. OBJECTIVES: The aim of our study was to evaluate the impact of patch testing with respect to patients' ability to remember patch test...... results and the results of natural rubber latex protein allergy after 2 years. METHODS: One hundred and ninety-nine patients diagnosed with relevant occupational epoxy or rubber chemical contact allergy, or allergy to natural rubber latex protein, were invited to participate in a questionnaire study about...... their knowledge of contact allergies after 2 years. RESULTS: The response rate was 75%. Of the respondents, 13% did not remember their occupational contact allergy to rubber chemicals or epoxy. Ability to remember was not significantly influenced by sex or Dermatology Life Quality Index, but was decreased by age...

The Synthesis and Modification of Nanosized Clickable Latex Particles

KAUST Repository

Almahdali, Sarah

2013-05-01

This research aims to add to the current knowledge available for miniemulsion polymerization reactions and to use this knowledge to synthesize multifunctional nanosized latex particles that have the potential to be used in catalysis. The physical properties of the latex can be adjusted to suit various environments due to the multiple functional groups present. For this research, styrene, pentafluorostyrene, azidomethyl styrene, pentafluorostyrene with azidomethyl styrene and pentafluorostyrene with styrene latexes were produced, and analyzed by dynamic light scattering. The latexes were synthesized using a miniemulsion polymerization technique found through this research. Potassium oleate and potassium 1,1,2,2,3,3,4,4-nonafluorobutane-1-sulfonate were used as surfactants during the miniemulsion polymerization reaction to synthesize pentafluorostyrene with azidomethyl styrene latex. Transmission electron microscopy data and dynamic light scattering data have been collected to analyze the structure of this latex, and it has been synthesized using a number of conditions, differing in reaction time, surfactant amount and sonication methods. We have also improved the solubility of the latex through a copper(I) catalyzed 1,3-dipolar azide-alkyne reaction, by clicking (polyethylene glycol)5000 onto the azide functional groups.

[Latex allergy in a paediatric hospital. Characteristics and risk factors].

Science.gov (United States)

Bailey, Michael; Norambuena, Ximena; Roizen, Gigia; Rodríguez, Jorge; Quezada, Arnoldo

The prevalence of latex sensitisation varies according to the population studied. There are various risk factors that increase latex sensitisation, such as genetic risk, atopy, and multiple surgeries. To characterise patients referred to an Immunology Unit with suspected latex allergy, and to analyse their clinical features and risk factors. A retrospective, descriptive study was conducted on children suspected of latex allergy. Their medical records were reviewed in order to assess symptoms with contact or exposure to latex materials. Known risk factors to latex sensitisation, such as pathologies requiring repeated surgery (spina bifida, myelomeningocele, scoliosis and nephro-urological alterations), atopy (rhinitis, asthma, atopic dermatitis) were investigated. A prick test and/or specific IgE to latex were also performed. A multivariate logistic regression model was performed to find associations between symptoms triggered by exposure to latex with underlying diseases and other risk conditions. A total of 106 patients were enrolled in the study, of whom 50 were evaluable. At diagnosis 96% of patients were older than five years. Most of the risk factors described were observable in these patients, such as multiple surgeries, neurological and nephro-urological malformations, surgery before one year-old, and repeated bladder catheterisation. After latex exposure, mucous cutaneous manifestations were the most common (52%), followed by respiratory symptoms (36%). All patients were sensitised and allergic to latex. Latex allergy is a significant problem in children with risk factors. The results shown in this study raise important challenges for preventive measures and awareness. Copyright © 2016 Sociedad Chilena de Pediatría. Publicado por Elsevier España, S.L.U. All rights reserved.

Isolation and characterization of latex-specific promoters from Papaver somniferum L.

OpenAIRE

Raymond, Michelle Jean

2004-01-01

The pharmacologically important alkaloids morphine and codeine are found in latex of opium poppy (Papaver somniferum). Latex is harbored in laticifers, a specialized vascular cell-type. Isolation and characterization of latex-specific genes may provide a useful tool to metabolically engineer increased alkaloid production. Previous research in the Nessler laboratory identified genes that exhibit latex-specific gene expression. Latex-specific genes were an 2-oxoglutarate-dioxygense (DIOX), ...

Thermodynamics of swelling of latex particles with two monomers

NARCIS (Netherlands)

Maxwell, I.A.; Kurja, J.; van Doremaele, G.H.J.; German, A.L.

1992-01-01

The partitioning of 2 monomers between the latex particle, monomer droplet, and aq. phases of an emulsion polymer latex are measured at satn. swelling of the latex particle phase (corresponding to intervals I and II of an emulsion polymn.). The monomer (Me acrylate, Bu acrylate, styrene) and polymer

Adaptive response induced by occupational exposures to ionizing radiation

International Nuclear Information System (INIS)

Barquinero, J.F.; Caballin, M.R.; Barrios, L.; Egozcue, J.; Miro, R.; Ribas, M.

1997-01-01

We have found a significant decreased sensitivity to the cytogenetic effects of both ionizing radiation (IR) (2 Gy of γ rays) and bleomycin (BLM, 0,03 U/ml), in lymphocytes from individuals occupationally exposed to IR when compared with controls. These results suggest that occupational exposures to IR can induce adaptive response that can be detected by a subsequent treatment either by IR or by BLM. When a comparison is made between the cytogenetic effects of both treatments, no correlation was observed at the individual level. On the other hand, the individual frequencies of chromosome aberrations induced by a challenge dose of IR were negatively correlated with the occupationally received doses during the last three years. This correlation was not observed after the challenge treatment of BLM. Moreover, the individual frequencies of chromosome aberrations induced by IR treatment were homogeneous. This is not the case of the individual frequencies of chromatid aberrations induced by BLM, where a great heterogeneity was observed. (authors)

Encapsulation of Clay Platelets inside Latex Particles

NARCIS (Netherlands)

Voorn, D.J.; Ming, W.; Herk, van A.M.; Fernando, R.H.; Sung, Li-Piin

2009-01-01

We present our recent attempts in encapsulating clay platelets inside latex particles by emulsion polymerization. Face modification of clay platelets by cationic exchange has been shown to be insufficient for clay encapsulation, leading to armored latex particles. Successful encapsulation of

Preparation of highly stabilised natural rubber latex for radiation vulcanisation

International Nuclear Information System (INIS)

Kulatunge, S.S.; Nadarajah, M.; Kalyani, N.M.V.; Chandralal, H.N.K.K.; Devendra, R.

1996-01-01

There is a bright future for radiation vulcanised natural rubber latex (RVNRL) but there are problems in manufacturing it as the centrifuged latex to be used for radiation has to be kept for at least a month or sometimes even three to six months before adding the sensitisers and even then the latex sometimes coagulates on adding the sensitisers. This paper describes a process by which the latex can be stabilised by addition of an anionic soap before centrifuging so that it has a high mechanical stability and hence can be used even within one week of the manufacture of the centrifuged latex

The Morphology of Emulsion Polymerized Latex Particles

Science.gov (United States)

Wignall, G. D.; Ramakrishnan, V. R.; Linne, M. A.; Klein, A.; Sperling, L. H.; Wai, M. P.; Gelman, R. A.; Fatica, M. G.; Hoerl, R. H.; Fisher, L. W.

1987-11-01

Under monomer starved feed conditions, emulsion polymerization of perdeuterated methyl methacrylate and styrene in the presence of preformed polymethylmethacrylate latexes resulted in particles with a core-shell morphology, as determined by small-angle neutron scattering (SANS) analysis for a hollow sphere. The locus of polymerization of the added deuterated monomer is therefore at the particle surface. In similar measurements a statistical copolymer of styrene and methyl methacrylate was used as seed particles for further polymerization of trideuteromethyl methacrylate. The resulting polymer latex was again shown to have a core-shell morphological structure as determined by SANS. SANS experiments were also undertaken on polystyrene latexes polymerized by equilibrium swelling methods, with deuterated polymer forming the first or second step. The experiments covered a molecular weight range of 6 x 10{sup 4} 10{sup 6} the molecular weights are consistent with the experimental errors, indicating that the deuterium labeled molecules are randomly distributed in the latex. These results led to the finding that the polymer chains were constrained in the latex particles by factors of 2 to 4 from the relaxed coil dimensions. For M molecules. Several models were examined, including the possible development of core-shell structures at lower molecular weights.

Troubleshooting for the observed problems in processing latex concentrate from natural resource

International Nuclear Information System (INIS)

Afreen, S; Haque, K R; Huda, M K

2013-01-01

Natural latex has special importance in the rubber industry for manufacturing different types of goods like gloves, balloons, male contraceptive and similar thin walled articles. This natural latex is much more sensitive a liquid to handle since it can easily become contaminated and thereby coagulated which makes it unfavourable for centrifuge and getting concentrate from it. Some other related measures also are included in consideration during the processing of concentrate latex from the natural raw latex. The problems that are being faced in a concentrate latex processing plant can be categorized in different groups like, problems related to the latex property, mechanical problems, electrical problems, handling and storage problems, transformation problems, problems related to environmental issues, etc. Among them, the most common and vital problems frequently observed in a concentrate latex processing plant are discussed here with a view to finding the measures for solution which will help to maintain the latex property in any latex processing plant.

Radiation vulcanization of Philippine natural rubber latex

International Nuclear Information System (INIS)

Dela Rosa, Alumanda M.; Abad, Lucille V.; Sta, Lorna P.; Ana-Relleve; Tranquilan-Aranilla, Charito O.; Pascual, Cristina L.

1996-01-01

The response of Philippine natural rubber latex to radiation vulcanization and the stability of the irradiated natural rubber latex (INRL) upon storage and aging were investigated. Commercially available high ammonia (HA) concentrated lattices obtained from various rubber plantations in Mindanao Island were treated with 5 phr of n-butyl acrylate (nBA), and gamma-irradiated at the PNRI sup 60 Co irradiation facility at dose rate of 2.57 KGy/hr. Unirradiated cast latex films gave different green strength which varied from 2 - 11 MPa. Cast films from INRL exhibited maximum tensile strengths of 25 - 32 MPa at a radiation dose of 15 kGy. Higher tensile strengths were obtained from cast films with low Mg and high nitrogen contents. Thermal analysis using thermogravimetry (TG) revealed one major decomposition product at 374 degree C - 377 degree C. Its rate of decomposition decreased to a minimum at 15 kGy, then increased as radiation dose increased. This trend correlated well with the tensile strength measurements. The stability of the INRL upon storage and aging is an essential parameter to the rubber latex industry. For storage studies, INRL was stored for various periods of time. It was found that the pH and total solids content of the stored INRL did not change significantly after 12 months of storage; the MST values remained at above 100 seconds, and the viscosity decreased with time. The cast films exhibited a decline in tensile strength, modulus 300% and crosslinking density upon storage. While there were observed changes in the physical properties of the IRNL during the storage period, the data indicate that these properties were within values acceptable to the latex industry. Tests on the aging properties of INRL film were undertaken. It was shown that among the chemical antioxidants presently used by the latex industry. TNPP demonstrated the highest antioxidant property, followed by Antage DAHQ and Vulcanox BKF. Our data indicate that the natural rubber latex

Radiation vulcanization of Philippine natural rubber latex

International Nuclear Information System (INIS)

Dela Rosa, A.M.; Abad, L.V.; Sta.Ana-Relleve, L.P.; Tranquilan-Aranilla, C.O.; Pascual, C.L.

1996-01-01

The response of Philippine natural rubber latex to irradiation vulcanization and the stability of the irradiated natural rubber latex (INRL) upon storage and aging were investigated. Commercially available high ammonia (HA) concentrated latices obtained from various rubber plantations in Mindanao island were treated with 5 phr of n-butyl acrylate (nBA), and gamma-irradiated at the PNRI 60 Co irradiation facility at a dose rate of 2.57 kGy/hr. Unirradiated cast latex films gave different green strengths which varied from 2-11 MPa. Cast films from INRL exhibited maximum tensile strengths were obtained from cast films with low Mg and high nitrogen contents. Thermal analysis using thermogravimetry (TG) revealed one major decomposition product at 374 o -377 o C. Its rate of decomposition decreased to a minimum at 15 kGy, then increased as radiation dose was increased. This trend correlated well with the tensile strength measurements. The stability of the INRL upon storage and aging is an essential parameter to the rubbe latex industry. For storage studies, INRL was stored for various periods of time. It was found that the pH and total solids content of the stored INRL did not change significantly after 12 months of storage; the MST values remained at above 1000 seconds, and the viscosity decreased with time. The cast films exhibited a decline in tensile strength, modulus 300% , and crosslinking density upon storage. While there were observed changes in the physical properties of the INRL during the storage period, the data indicate that these properties were within values acceptable to the latex industry. Tests on the aging properties of INRL films were undertaken. It was shown that among the chemical antioxidants presently used by the latex industry, TNPP demonstrated the highest antioxidant property, followed by Antage DAHQ and Vulcanox BKF. Our data indicate that the natural rubber latex produced and processed in the Philippines is suited for radiation vulcanization

CHARACTERIZATION AND RECYCLING OF WASTE WATER FROM GUAYULE LATEX EXTRACTION

Science.gov (United States)

Guayule commercialization for latex production to be used in medical products and other applications is now a reality. Currently, waste water following latex extraction is discharged into evaporation ponds. As commercialization reaches full scale, the liquid waste stream from latex extraction will b...

EDITORIALS Latex allergy: 'Plight, rights and fights'

African Journals Online (AJOL)

anaphylaxis and life-threatening food allergies to cross-reacting fruit allergens such as kiwi, banana, tomato and chestnuts). Latex allergy is also encountered more frequently in children with spina bifida than in other hospitalised children.[7] Sensitisation is usually confirmed by commercial latex allergy skinprick testing or by ...

Comparison of competency priorities between UK occupational physicians and occupational health nurses.

Science.gov (United States)

Lalloo, Drushca; Demou, Evangelia; Stevenson, Marisa; Gaffney, Mairi; Macdonald, Ewan Beaton

2017-05-01

The competencies required of occupational physicians (OPs) and occupational health nurses (OHNs) separately have been studied in various countries but little research has made direct comparisons between these two key occupational health (OH) professional groups. The aim of this study was to compare current competency priorities between UK OPs and OHNs. A modified Delphi study conducted among professional organisations and networks of UK OPs and OHNs. This formed part of a larger Delphi, including international OPs. It was undertaken in two rounds (round 1-'rating', round 2-'ranking'), using a questionnaire based on available OH competency guidance, the literature, expert panel reviews and conference discussions. In each round (rating/ranking), 57/49 and 48/54 responses were received for OPs and OHNs respectively. The principle domain (PD) competency ranks were very highly correlated (Spearman's r=0.972) with the same PDs featuring in the top four and bottom three positions. OPs and OHNs ranked identically for the top two PDs (good clinical care and general principles of assessment and management of occupational hazards to health). Research methods was ranked lowest by both groups. This study has observed a high level of agreement among UK OPs and OHNs on current competency priorities. The 'clinically focused' competency priorities likely reflect that although OH practice will broaden in response to various factors, traditional 'core' OH activities will still be required. These mutually identified priorities can serve to strengthen collaboration between these groups, develop joint education/training programmes and identify common professional development opportunities. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Syntheses of crosslinked latex nanoparticles using differential microemulsion polymerization

Science.gov (United States)

Hassmoro, N. F.; Rusop, M.; Abdullah, S.

2013-06-01

The differential microemulsion polymerization was used to synthesize latex nanoparticles. In this paper, 1, 3-butylene glycol dimethacrylate (1, 3-BGDMA) was used as a crosslinker respectively 1-5 weight% of monomer total. Butyl acrylate (BA), butyl methacrylate (BMA), and methacrylic acid (MAA) was used as the monomer. The thin film of latex nanoparticles were prepared by using spin coating method and have been dried at 100°C for 5 minutes. The amount of the crosslinker added in the polymerization was optimized and we found that the particle sizes fall in the range of 30-60 nm. The structural morphology of the uncrosslinked latex represented the most homogeneous image compared to the crosslinked latex. The effect of the amount of crosslinker on the particle sizes investigated by the Zeta-sizer Nano series while Atomic Force microscopy (AFM) was used to study the structural properties of latex nanoparticles.

Syntheses of crosslinked latex nanoparticles using differential microemulsion polymerization

International Nuclear Information System (INIS)

Hassmoro, N F; Abdullah, S; Rusop, M

2013-01-01

The differential microemulsion polymerization was used to synthesize latex nanoparticles. In this paper, 1, 3-butylene glycol dimethacrylate (1, 3-BGDMA) was used as a crosslinker respectively 1–5 weight% of monomer total. Butyl acrylate (BA), butyl methacrylate (BMA), and methacrylic acid (MAA) was used as the monomer. The thin film of latex nanoparticles were prepared by using spin coating method and have been dried at 100°C for 5 minutes. The amount of the crosslinker added in the polymerization was optimized and we found that the particle sizes fall in the range of 30–60 nm. The structural morphology of the uncrosslinked latex represented the most homogeneous image compared to the crosslinked latex. The effect of the amount of crosslinker on the particle sizes investigated by the Zeta-sizer Nano series while Atomic Force microscopy (AFM) was used to study the structural properties of latex nanoparticles.

Home Healthcare Workers: How to Prevent Latex Allergies

Science.gov (United States)

... can help prevent allergic reactions for both home healthcare workers and their clients. LATEX EXPOSURE REACTIONS Three ... being used). • Inform your employer and your personal healthcare professionals that you have latex allergy. • Wear a ...

Angiogenic activity of Synadenium umbellatum Pax latex

Directory of Open Access Journals (Sweden)

PR. Melo-Reis

Full Text Available Synadenium umbellatum Pax, popularly known as "cola-nota", is a medicinal plant that grows in tropical regions. Latex of this plant is used to treat various diseases such as diabetes mellitus, Hansen´s disease, tripanosomiases, leukemia and several malignant tumors. In the present study, the angiogenic activity of S. umbellatum latex was evaluated using the chick embryo chorioallantoic membrane (CAM assay. Results showed significant increase of the vascular net (p < 0.05 compared to the negative control (H2O. The histological analysis was in accordance with the results obtained. In conclusion, our data indicate that S. umbellatum latex, under the conditions of this research, presented angiogenic effect.

The orchestration of occupation: the dance of mothers.

Science.gov (United States)

Larson, E A

2000-01-01

This article describes the relationship of mothers' orchestration of daily occupations, the specialized maternal work of parenting a child with a disability, and the mother's subjective well-being. Mothers' daily occupations and subjective well-being were studied using multiple in-depth interviews, participant observation of a day's round of occupations, and scales of well-being. Data were treated to a recursive analysis, which included theoretical notes generated during transcriptions that identified important themes and additional points of inquiry, line-by-line coding of transcripts, and theoretical sorting of codes and regrouping, recoding. To account for patterns in the data, a relational analysis was conducted that included the generation of metaphors. Emergent findings of this analysis identified the mothers' guiding occupational motif and eight processes of orchestration in their daily routines. The occupational motif, the embrace of paradox, directed the mother's orchestration of daily occupations. The orchestration processes included planning, organizing, balancing, anticipating, interpreting, forecasting, perspective shifting, and meaning making. Examples illustrate the maternally driven and child-sensitive nature of these processes. In their daily rounds, the mothers studied were attentive to the manner and method with which they interacted with their children to produce child-contingent occupations commensurate with their values of being a good mother. Using these orchestration processes, mothers made sense of their past, designed their present, and planned for their future within their daily occupational rounds for themselves and family members.

Enhanced protein adsorption and patterning on nanostructured latex-coated paper.

Science.gov (United States)

Juvonen, Helka; Määttänen, Anni; Ihalainen, Petri; Viitala, Tapani; Sarfraz, Jawad; Peltonen, Jouko

2014-06-01

Specific interactions of extracellular matrix proteins with cells and their adhesion to the substrate are important for cell growth. A nanopatterned latex-coated paper substrate previously shown to be an excellent substrate for cell adhesion and 2D growth was studied for directed immobilization of proteins. The nanostructured latex surface was formed by short-wavelength IR irradiation of a two-component latex coating consisting of a hydrophilic film-forming styrene butadiene acrylonitrile copolymer and hydrophobic polystyrene particles. The hydrophobic regions of the IR-treated latex coating showed strong adhesion of bovine serum albumin (cell repelling protein), fibronectin (cell adhesive protein) and streptavidin. Opposite to the IR-treated surface, fibronectin and streptavidin had a poor affinity toward the untreated pristine latex coating. Detailed characterization of the physicochemical surface properties of the latex-coated substrates revealed that the observed differences in protein affinity were mainly due to the presence or absence of the protein repelling polar and charged surface groups. The protein adsorption was assisted by hydrophobic (dehydration) interactions. Copyright © 2014 Elsevier B.V. All rights reserved.

Triterpenoid biosynthesis in Euphorbia lathyris latex

International Nuclear Information System (INIS)

Hawkins, D.R.

1987-11-01

The structures of triterpenols, not previously been known, from Euphorbia lathyris latex are reported. A method for quantifying very small amounts of these compounds was developed. Concerning the biochemistry of the latex, no exogenous cofactors were required for the biosynthesis and the addition of compounds such as NADPAH and ATP do not stimulate the biosynthesis. The addition of DTE or a similar anti-oxidant was found to help reduce the oxidation of the latex, thus increasing the length of time that the latex remains active. The requirement of a divalent cation and the preference for Mn in the pellet was observed. The effect of several inhibitors on the biosynthesis of the triterpenoids was examined. Mevinolin was found to inhibit the biosynthesis of the triterpenoids from acetate, but not mevalonate. A dixon plot of the inhibition of acetate incorporation showed an I 50 concentration of 3.2 μM. Fenpropimorph was found to have little or no effect on the biosynthesis. Tridemorph was found to inhibit the biosynthesis of all of the triterpenoids with an I 50 of 4 μM. It was also observed that the cyclopropyl containing triterpenols, cycloartenol and 24-methylenecycloartenol were inhibited much more strongly than those containing an 8-9 double bond, lanosterol and 24-methylenelanosterol. The evidence indicates, but does not definetely prove, that lanosterol and 24-methylenelanosterol are not made from cycloartenol and 24-methylenecycloartenol via a ring-opening enzyme such as cycloeucalenol-obtusifoliol isomerase. The possibilty that cycloartenol is made via lanosterol was investigated by synthesizing 4-R-4- 3 H-mevalonic acid and incubating latex with a mixture of this and 14 C-mevalonic acid. From the 3 H/ 14 C ratio it was shown that cycloartenol and 24-methylenecycloartenol are not made via an intermediate containing as 8-9 double bond. 88 refs., 15 figs., 30 tabs

Studies on physico-chemical and mechanical properties of the irradiated latex modified mortar

International Nuclear Information System (INIS)

Yassene, A.A.M.A.

2009-01-01

This thesis contains three chapter; chapter(I): Introduction and literature review on:- Introduction to polymer. - Mechanism of polymer-cement co-matrix formation.-Sulphate attack. - Solidification /stabilization of heavy metal in cement mortar. chapter(II): Materials and experimental techniques that include: 1- Preparation of latex polymer films from different polymer latices of styrene butadine rubber latex (SBR), poly (styrene-acrylic ester) latex (SAE) and vinylacetate /versatic -ester copolymer latex (C2A). The effect of γ-irradiation dose on the physico - chemical and mechanical properties of different latex polymer films was studied.2- Preparation of latex polymer-modified cement mortar with different ratios of cement: latex polymer and different curing method.3- Solidification /stabilization (S/S) of electroplating heavy metal precipitate in latex polymer- modified mortar with different cement /electroplating heavy metal sludge ratio. chapter(III) results and discussion

PS-HEMA latex fractionation by sedimentation and colloidal crystallization

Directory of Open Access Journals (Sweden)

Cardoso André H.

1999-01-01

Full Text Available A poly(styrene-co-hydroxyethylmethacrylate latex underwent sedimentation under gravity followed by an spontaneous and extensive colloidal crystallization. It was then fractionated in three visually distinguishable layers. Latex aliquots layers were sampled at different heigths and the particles were characterized by PCS, microelectrophoresis, infrared spectra and analytical electron microscopy. The major fraction was opalescent and contained the colloidal crystals settled in the bottom of the liquid. Two other latex fractions were obtained, which differed in their chemical compositions, particle sizes and topochemical features from the self-arraying particles. Macrocrystallization of the fractionated latex yielded high quality crystals with a low frequency of defects, which confirms that particle chemical homogeneity is an important factor for particle self-arraying.

Synthesis and characterization of fluorinated polyacrylate latex emulsified with novel surfactants.

Science.gov (United States)

Zhang, Cuifeng; Xu, Tingting; Bao, Zhongbin; Chen, Lijun

2017-01-01

The fluorinated polyacrylate latex were successfully prepared with semi- continuous seeded emulsion polymerization of butyl acrylate (BA), methyl methacrylate (MMA) and hexafluorobutyl methacrylate (HFMA) which was initiated with potassium persulfate (KPS) initiator and emulsified with the novel mixed surfactants of sodium lauryl glutamate (SLG) and alkylphenol ethoxylates (OP-10). The structure of the resultant latex was confirmed by Fourier transform infrared spectroscopy (FTIR). The particle size of the latex was measured by Zetatrac dynamic light scattering detector. The film of latex was tested by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and contact angle (CA). The optimum conditions of preparing the novel fluorinated polyacrylate latex are optimized and the results are as follows: the amount of emulsifiers is 4.0%; mass ratio of SLG to OP-10 is 1:1, the amount of the initiator is 0.6%. The mass ratio of MMA to BA is 1:1 and the amount of HFMA is 7.0%. In this case, the conversion is high and the polymerization stability is good. In addition, the water resistance and thermal properties of the latex films were improved significantly in comparison with the film of the latex prepared without the fluorinated monomer.

Plant latex: a promising antifungal agent for post harvest disease control.

Science.gov (United States)

Sibi, G; Wadhavan, Rashmi; Singh, Sneha; Shukla, Abhilasha; Dhananjaya, K; Ravikumar, K R; Mallesha, H

2013-12-01

Bioactive compounds from plant latex are potential source of antifungic against post harvest pathogens. Latex from a total of seven plant species was investigated for its phytochemical and antifungal properties. Six fungi namely Aspergillus fumigatus, A. niger, A. terreus, F. solani, P. digitatum and R. arrhizus were isolated from infected fruits and vegetables and tested against various solvent extracts of latex. Analysis of latex extracts with phytochemical tests showed the presence of alkaloids, flavonoids, glycosides, phenols, saponins, steroids, tannins and terpenoids. Antifungal assay revealed the potential inhibitory activity of petroleum ether extracts against the postharvest fungal isolates. Various degree of sensitivity was observed irrespective of plant species studied with A. terreus and P. digitatum as the most susceptible ones. F. solani and A. fumigatus were moderately sensitive to the latex extracts tested. Among the plants, latex of Thevetia peruviana (75.2%) and Artocarpus heterophyllus (64.8%) were having potential antifungal activity against the isolates followed by Manilkara zapota (51.1%). In conclusion, use of plant latex makes interest to control postharvest fungal diseases and is fitting well with the concept of safety for human health and environment.

Drying of latex films and coatings: Reconsidering the fundamental mechanisms

DEFF Research Database (Denmark)

Kiil, Søren

2006-01-01

The two existing theories describing drying of latex films or coatings are reconsidered. Subsequently, a novel mathematical drying model is presented, the simulations of which can match and explain experimental drying rate data of two previous investigations with latex films. In contrast to previ......The two existing theories describing drying of latex films or coatings are reconsidered. Subsequently, a novel mathematical drying model is presented, the simulations of which can match and explain experimental drying rate data of two previous investigations with latex films. In contrast...... to previous model studies, but in agreement with observations, simulations suggest that during the falling rate period of the drying process of a latex film, a porous skin of partly coalesced latex particles is indeed formed, which limits transport of water vapour from the receding air-liquid interphase...... to the surface of the film. The value of the effective diffusion coefficient of water vapour in the dry and partly coalesced layer (7 x 10(-7) m(2)/s at 19-24 degrees C), the adjustable parameter of the model for the falling rate period, was found to be independent of initial wet film thickness (89-1322 mu m...

Occupational allergic multiorgan disease induced by wheat flour

OpenAIRE

Gómez Torrijos, Elisa; Rodríguez Sanchez, Joaquín; Diaz Perales, Araceli; García, R.; Feo-Brito, F.; García, C.; Pineda, Fernando; Quirce, Santiago

2015-01-01

Bakers are repeatedly exposed to wheat flour (WF) and may develop sensitization and occupational rhinoconjunctivitis and/or asthma to WF allergens.1 Several wheat proteins have been identified as causative allergens of occupational respiratory allergy in bakery workers.1 Testing of IgE reactivity in patients with different clinical profiles of wheat allergy (food allergy, wheat-dependent exercise-induced anaphylaxis, and baker's asthma) to salt-soluble and salt-insoluble protein fractions fro...

Radiation response of Philippine natural rubber latex

International Nuclear Information System (INIS)

Dela Rosa, A.M.; Abad, L.V.; Ana-Relleve, L.S.; Tranquilan-Aranilla, C.; Pascual, C.L.

1998-01-01

Our earlier work has shown that the natural rubber latex (NRL) produced and processed in the Philippines is suited for radiation vulcanization. The cast films from NRL with 50% TSC exhibited maximum tensile strengths of 25-32 MPa at 15 kGy, which is the vulcanization dose or Dv. In the manufacture of dipped NRL products, certain specifications such as %TSC, protein content and tensile properties, must be met to ensure an acceptable product. For radiation vulcanization of natural rubber latex (RVNRL) to be accepted as an alternative process, it must also meet the requirements. Thus, this paper presents additional data on the radiation response of local NRL at different total solids contents (TSC), leachable proteins from NRL films as a function of dose, and the thermal activities of irradiated natural rubber latex (INRL). Different formulations of NRL showed varying tolerances to nBA. Data showed that as %TSC increases, the maximum concentration of nBA that can be added without affecting the stability of the latex decreases. The Dv increases as the %TSC increases and the nBA content decreases. This difference in response may be attributed to a lower concentration of nBA in formulations with higher %TSC. These data indicate that the parameters in the radiation treatment will be dictated by the intended applications of INRL. The thermogravimetric data showed greater stability of INRL to thermal oxidation relative to the unirradiated NRL, which correlates directly with the tensile properties of the INRL. A radiation dose of 10 kGy increased the amount of proteins leached from cast latex films. The amount of extractable proteins did not increase significantly at higher doses. The SDS PAGE analysis of the extractable proteins from unirradiated latex film showed distinct bands. An additional band at 60 Kda appeared at 10 kGy. All these bands became diffuse at higher doses, indicating the radiolysis of the proteins

Synthesis and characterization of poly (n-butyl acrylate)-poly (methyl methacrylate) latex interpenetrating polymer networks by radiation-induced seeded emulsion polymerization

Energy Technology Data Exchange (ETDEWEB)

Yu Haibo [Department of Applied Chemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China); Peng Jing [Department of Applied Chemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China)], E-mail: jpeng@pku.edu.cn; Zhai Maolin; Li Jiuqiang; Wei Genshuan [Department of Applied Chemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China); Qiao Jinliang [Department of Applied Chemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China); SINOPEC Beijing Research Institute of Chemical Industry, Beijing 100013 (China)

2007-11-15

A series of latex interpenetrating polymer networks (LIPNs) were prepared via a two-stage emulsion polymerization of methyl methacrylate (MMA) or mixture of MMA and n-butyl acrylate (n-BA) on crosslinked poly(n-butyl acrylate)(PBA) seed latex using {sup 60}Co {gamma}-ray radiation. The particles of resultant latex were produced with diameters between 150 and 250 nm. FTIR spectra identified the formation of crosslinked copolymers of PMMA or P(MMA-co-BA). Dynamic light scattering (DLS) showed that with increasing n-BA concentration in second-stage monomers, the particle size of LIPN increased. Transmission electron microscope(TEM) photographs showed that the morphology of resultant acrylate interpenetrating polymer network (IPN) latex varied from the distinct core-shell structure to homogenous particle structure with the increase of n-BA concentration, and the morphology was mainly controlled by the miscibility between crosslinked PBA seed and second-stage copolymers and polarity of P(MMA-co-BA)copolymers. In addition, differential scanning calorimeter (DSC) measurements indicated the existence of reinforced miscibility between PBA seed and P(MMA-co-BA)copolymer in prepared LIPNs.

Bittersweet Findings: Round Cups Fail to Induce Sweeter Taste

Directory of Open Access Journals (Sweden)

Casparus J. A. Machiels

2018-02-01

Full Text Available An increasing body of literature demonstrates that consumers associate visual information with specific gustatory elements. This phenomenon is better known as cross-modal correspondence. A specific correspondence that has received attention of late is the one between round forms and sweet taste. Research indicates that roundness (as opposed to angularity is consistently associated with an increased sweetness perception. Focusing on two different cup forms (round versus angular, two studies tested this association for a butter milk drink and a mate-based soft drink. Results, however, were not able to corroborate the frequently suggested correspondence effect, but a correspondence was found between the angular cup and a more bitter taste for the soft drink. These results are discussed in light of previous findings matching sweetness with roundness and bitterness with angularity, hopefully aiding researchers in this field in conducting future experiments.

A Reappraisal of Online Mathematics Teaching Using LaTeX

Directory of Open Access Journals (Sweden)

Eamon Costello

2009-12-01

Full Text Available The mathematics language LaTeX is often seen outside of academic circles as a legacy technology that is awkward to use. MathML - a verbose language designed for data-exchange, and to be written and understood by machines - is sometimes by contrast seen as something that will aid online mathematics and lack of browser support for it bemoaned. However LaTeX can already do many of the things that MathML might promise. LaTeX is here proposed as a language from which small fragments, with concise syntax, can be used by people to easily create and share mathematical expressions online. The capability to embed fragments of LaTeX code in online discussions is described here and its impact on a group of educators and learners evaluated. Here LaTeX is posited as a useful tool for facilitating asynchronous, online, collaborative learning of mathematics.

Antibacterial activity of the latex of Argemone ochroleuca Sweet

International Nuclear Information System (INIS)

Saad A. Alamri; Mahmoud F. Moustafa

2010-01-01

To investigate the antibacterial effect of the crude latex of Argemone ochroleuca (A. ochroleuca) as antibacterial potential against a range of human pathogenic bacteria. This study was carried out at King Khalid University, Abha, Kingdom of Saudi Arabia from January to March 2010. Seventeen ml of fresh latex from A. ochroleuca Sweet was collected, and the antibacterial activity of crude and diluted latex were examined using one ml of standardized inoculum suspension, and using the agar diffusion method test against Bacillus subtilis, Enterobacter aerogenes, Micrococcus luteus, Escherichia coli, and Staphylococcus aureus. All inoculated plates were incubated aerobically at 290C for 48 hours. The diameter of the zones of inhibition was measured to the nearest mm. The crude latex of A. ochroleuca exhibited a potent antibacterial effect on all bacterial strains examined. The zones of inhibition against the tested bacteria were found in the range of 9.30 - 40.3 mm along with their respective minimum inhibitory concentration values 100 ul/ml. The observable inhibition on selected bacteria by latex of A. ochroleuca makes it a promising alternative as a potential source of natural antibacterial (Author).

Triterpenoid biosynthesis in Euphorbia lathyris latex

Energy Technology Data Exchange (ETDEWEB)

Hawkins, D.R.

1987-11-01

The structures of triterpenols, not previously been known, from Euphorbia lathyris latex are reported. A method for quantifying very small amounts of these compounds was developed. Concerning the biochemistry of the latex, no exogenous cofactors were required for the biosynthesis and the addition of compounds such as NADPAH and ATP do not stimulate the biosynthesis. The addition of DTE or a similar anti-oxidant was found to help reduce the oxidation of the latex, thus increasing the length of time that the latex remains active. The requirement of a divalent cation and the preference for Mn in the pellet was observed. The effect of several inhibitors on the biosynthesis of the triterpenoids was examined. Mevinolin was found to inhibit the biosynthesis of the triterpenoids from acetate, but not mevalonate. A dixon plot of the inhibition of acetate incorporation showed an I/sub 50/ concentration of 3.2 ..mu..M. Fenpropimorph was found to have little or no effect on the biosynthesis. Tridemorph was found to inhibit the biosynthesis of all of the triterpenoids with an I/sub 50/ of 4 ..mu..M. It was also observed that the cyclopropyl containing triterpenols, cycloartenol and 24-methylenecycloartenol were inhibited much more strongly than those containing an 8-9 double bond, lanosterol and 24-methylenelanosterol. The evidence indicates, but does not definetely prove, that lanosterol and 24-methylenelanosterol are not made from cycloartenol and 24-methylenecycloartenol via a ring-opening enzyme such as cycloeucalenol-obtusifoliol isomerase. The possibilty that cycloartenol is made via lanosterol was investigated by synthesizing 4-R-4-/sup 3/H-mevalonic acid and incubating latex with a mixture of this and /sup 14/C-mevalonic acid. From the /sup 3/H//sup 14/C ratio it was shown that cycloartenol and 24-methylenecycloartenol are not made via an intermediate containing as 8-9 double bond. 88 refs., 15 figs., 30 tabs.

[The role of acoustic impedance test in the diagnosis for occupational noise induced deafness].

Science.gov (United States)

Chen, H; Xue, L J; Yang, A C; Liang, X Y; Chen, Z Q; Zheng, Q L

2018-01-20

Objective: To investigate the characteristics of acoustic impedance test and its diagnostic role for occupational noise induced deafness, in order to provide an objective basis for the differential diagnosis of occupational noise induced deafness. Methods: A retrospective study was conducted to investigate the cases on the diagnosis of occupational noise-induced deafness in Guangdong province hospital for occupational disease prevention and treatment from January 2016 to January 2017. A total of 198 cases (396 ears) were divided into occupation disease group and non occupation disease group based on the diagnostic criteria of occupational noise deafness in 2014 edition, acoustic conductivity test results of two groups were compared including tympanograms types, external auditory canal volume, tympanic pressure, static compliance and slope. Results: In the occupational disease group, 204 ears were found to have 187 ears (91.67%) of type A, which were significantly higher than those in the non occupational disease group 143/192 (74.48%) , the difference was statistically significant (χ(2)=21.038, P occupation disease group in other type were 16/204 (7.84%) , 3/204 (1.47%) , were lower than Ad or As type of occupation disease group (15.63%) , other type (9.38%) , the differences were statistically significant[ (χ(2)=5.834, P Occupation disease group canal volume average (1.68±0.39) ml higher than that of non occupation disease group (1.57 ± 0.47) ml, the difference was statistically significant ( t =2.756, P occupation disease group mean static compliance (1.06±0.82) ml higher than that of non occupation disease group (0.89±0.64) ml. The difference was statistically singificant ( t =2.59, P occupational noise induced deafness, More than 90% of the confirmed cases showed an A-form tympanograms, it is one of the objective examination methods which can be used in the differential diagnosis of pseudo deafness.

Alergia látex-fruta Latex-fruit allergy

Directory of Open Access Journals (Sweden)

Flávia Andréia MARIN

2002-01-01

Full Text Available O látex está sendo considerado o alergênico do ano 2000, tendo em vista que inúmeros indivíduos, principalmente profissionais da área de saúde e pacientes submetidos a várias intervenções diagnósticas e terapêuticas, estão freqüentemente expostos aos alérgenos do látex, presentes em produtos de borracha natural. As manifestações clínicas conseqüentes às reações alérgicas de hipersensibilidade imediata vão desde rinite, urticária, conjuntivite, angioedema, asma, até anafilaxia. Estudos recentes estão demonstrando que pacientes alérgicos ao látex desenvolvem concomitantemente sensibilização a certos alimentos de origem vegetal, especialmente frutas como papaia, figo, banana, abacate, kiwi, pêssego, abacaxi, melão e castanha, acreditando-se numa provável ocorrência de reações cruzadas entre os alérgenos do látex e destas frutas. Faz-se, então, uma revisão sobre a alergia ao látex, em particular sobre os grupos de risco, incluindo a presença de reatividade cruzada entre o látex e as frutas.The latex is being considered the allergenic agent of the year 2000, taking into account that several individuals, mainly health care professionals, and patients who had undergone many diagnostic and therapeutic interventions, are frequently exposed to latex allergens, which are present in natural rubber latex products. The clinical manifestations, derived from allergic reactions of immediate hypersensitivity vary from since rhinitis, conjunctivitis, urticaria, angioedema, asthma, to anaphylaxis. Recent researches are demonstrating that patients allergic to latex develop concomitantly sensitization to certain vegetable foods, especially fruits like papaya, fig, banana, avocado, kiwi, peach, pineapple, melon and chestnut, and a probable occurrence of cross reaction between allergens of latex and of these fruits is believed. A review is made about latex allergy, in particular about risk groups, including the presence of

Insights on the Phytochemical Profile (Cyclopeptides and Biological Activities of Calotropis procera Latex Organic Fractions

Directory of Open Access Journals (Sweden)

Thiago Lustosa Jucá

2013-01-01

Full Text Available Calotropis procera is a medicinal plant whose pharmacological properties are associated with its latex. Here, the Calotropis procera latex fractions were investigated in an attempt to trace its phytochemical profile and measure its anti-inflammatory and toxicity activity. The crude latex was partitioned, yielding five fractions (49.4% hexane, 5.2% dichloromethane, 2.0% ethyl acetate, 2.1% n-butanol, and 41.1% aqueous. Phytochemical screening and spectroscopy analysis revealed that dichloromethane is the most chemically diverse fraction. Triterpenes were detected in both the hexane and dichloromethane fractions, while flavonoids were detected in the dichloromethane and ethyl acetate fractions. These fractions were cytotoxic to cancer cell lines (LD50 0.05 to 3.9 μg/mL and lethal to brine shrimp (LD50 10.9 to 65.7 μg/mL. Reduced neutrophil migration in rats was observed in carrageenan-induced peritonitis for the dichloromethane (67%, ethyl acetate (56%, and aqueous (72% fractions. A positive reaction with tolidine and ninhydrin suggested that cyclopeptides are in the ethyl acetate fraction. It is therefore concluded that Calotropis procera latex dichloromethane and ethyl acetate fractions exhibit both in vitro and in vivo activities as well as anti-inflammatory properties. Cyclopeptide detection is especially interesting because previous attempts to investigate these low-molecular cyclic amino acid sequences in C. procera have failed.

Estimated exposure of hands inside the protective gloves used by non-occupational handlers of agricultural pesticides.

Science.gov (United States)

Beránková, Martina; Hojerová, Jarmila; Peráčková, Zuzana

2017-11-01

Exposure of handlers'/operators' hands is a main route of agricultural pesticides entry into their body. Non-occupational handlers still lack information about appropriate selection of protective gloves to minimize exposure and reduce adverse effects of these chemicals. According to the results of our previous survey, six commercially available, water-resistant gloves commonly used by non-professional gardeners were evaluated for permeation of Acetamiprid, Pirimicarb, and Chlorpyrifos-methyl (Chlorp-m) pesticides by means of in vitro testing. In-use conditions were mimicked as close as possible. Chlorp-m through latex was observed inside the glove from >10 to ⩽15 min; however, Acetamiprid and Pirimicarb through neoprene/latex and all the three pesticides through butyl were not observed inside gloves for the duration of the experiments (the Breakthrough time (BT)>8 h). The 1-h exposure proved the interior glove contamination with Chlorp-m through disposable latex, vinyl, and nitrile gloves (51, 33, and 41% of applied dose (AD), respectively) just as with Acetamiprid and Pirimicarb through latex glove (11 and 14%AD, respectively). However, when storing the used gloves for 4 days after the exposure, no release of the three pesticides from the butyl and Acetamiprid from neoprene/latex gloves was detected. In all other cases, pesticides were found in the interior glove (36-79, 31-63, and 51-81%AD for Acetamiprid, Pirimicarb, and Chlorp-m, respectively). If used repeatedly, gloves contaminated in this way lose their protective function but give the user a false sense of security. The results suggest that (i) water-resistant gloves are not necessarily pesticide resistant; (ii) disposable latex gloves commonly worn by non-professional gardeners provide inadequate protection even for a short-time contact with pesticides; (iii) to assess the efficiency of reusable gloves, not only BT value but also the reservoir/release effect of parent pesticide and its degradation

Noise-induced hearing loss: an occupational medicine perspective.

Science.gov (United States)

Stucken, Emily Z; Hong, Robert S

2014-10-01

Up to 30 million workers in the United States are exposed to potentially detrimental levels of noise. Although reliable medications for minimizing or reversing noise-induced hearing loss (NIHL) are not currently available, NIHL is entirely preventable. The purpose of this article is to review the epidemiology and pathophysiology of occupational NIHL. We will focus on at-risk populations and discuss prevention programs. Current prevention programs focus on reducing inner ear damage by minimizing environmental noise production and through the use of personal hearing protective devices. NIHL is the result of a complex interaction between environmental factors and patient factors, both genetic and acquired. The effects of noise exposure are specific to an individual. Trials are currently underway evaluating the role of antioxidants in protection from, and even reversal of, NIHL. Occupational NIHL is the most prevalent occupational disease in the United States. Occupational noise exposures may contribute to temporary or permanent threshold shifts, although even temporary threshold shifts may predispose an individual to eventual permanent hearing loss. Noise prevention programs are paramount in reducing hearing loss as a result of occupational exposures.

Does occupational exposure to ionizing radiation induce adaptation

International Nuclear Information System (INIS)

Djurovic, B.; Selakovic, V.; Radjen, S.; Radakovic, S.; Spasic-Jokic, V.

2008-01-01

Full text: Even the most of personnel occupationally exposed (OE) to ionizing radiation (IR) is exposed to very low doses (LD), some harmful effects can be noticed. IR can affect the cell structure in two ways: directly and indirectly-inducing radiolysis of water and production of reactive oxygen species (ROS) similar to endogenously induced. In the low- LET exposure almost 70 % of absorbed energy is spent for ROS production. Over-production of ROS can cause oxidative stress. DNA is the main target of induced ROS. It is also experimentally showed that many important cell protective mechanisms, such is adaptation, are dependent of ROS concentration produced by low doses. The aim of this paper is to investigate if occupational exposure to LD induce over-production of ROS, and influence the activity of protective enzymes and radiosensitivity as well as induce adaptation. Our subjects were medical workers occupationally exposed to IR (44) and not-exposed (33), matched in gender, age, habits-dietary, alcohol consumption, smoking. Occupational exposure was calculated on the basis of individual TL-dose records. Besides the standard medical examination, micronucleus test, superoxide production and lipid peroxidation index, expressed as malonaldehyde (MDA) production, were performed by standard procedures as well as measurements of activity of the superoxide dismutase (SOD) and glutathione (GSH). Half of each sample were put in a sterile plastic test-tube placed in a plexiglas container 15 x 15 cm, and irradiated by 60 Co source of γ-ray at room temperature. Employed radiation dose was 2 Gy, dose-rate 0.45 Gy/min and distance from the source 74 cm. All blood samples were frozen at -70 C degrees, and kept till analyses which were performed at the same time. Our results confirm: significantly higher incidence of micronuclei in OE (.31±10 vs 17±8, p=0.00) with significant increase after irradiation in each group and lack of differences in radiosensitivity between groups

A Drug Combination Screen Identifies Drugs Active against Amoxicillin-Induced Round Bodies of In Vitro Borrelia burgdorferi Persisters from an FDA Drug Library.

Science.gov (United States)

Feng, Jie; Shi, Wanliang; Zhang, Shuo; Sullivan, David; Auwaerter, Paul G; Zhang, Ying

2016-01-01

Although currently recommended antibiotics for Lyme disease such as doxycycline or amoxicillin cure the majority of the patients, about 10-20% of patients treated for Lyme disease may experience lingering symptoms including fatigue, pain, or joint and muscle aches. Under experimental stress conditions such as starvation or antibiotic exposure, Borrelia burgdorferi can develop round body forms, which are a type of persister bacteria that appear resistant in vitro to customary first-line antibiotics for Lyme disease. To identify more effective drugs with activity against the round body form of B. burgdorferi, we established a round body persister model induced by exposure to amoxicillin (50 μg/ml) and then screened the Food and Drug Administration drug library consisting of 1581 drug compounds and also 22 drug combinations using the SYBR Green I/propidium iodide viability assay. We identified 23 drug candidates that have higher activity against the round bodies of B. burgdorferi than either amoxicillin or doxycycline. Eleven individual drugs scored better than metronidazole and tinidazole which have been previously described to be active against round bodies. In this amoxicillin-induced round body model, some drug candidates such as daptomycin and clofazimine also displayed enhanced activity which was similar to a previous screen against stationary phase B. burgdorferi persisters not exposure to amoxicillin. Additional candidate drugs active against round bodies identified include artemisinin, ciprofloxacin, nifuroxime, fosfomycin, chlortetracycline, sulfacetamide, sulfamethoxypyridazine and sulfathiozole. Two triple drug combinations had the highest activity against amoxicillin-induced round bodies and stationary phase B. burgdorferi persisters: artemisinin/cefoperazone/doxycycline and sulfachlorpyridazine/daptomycin/doxycycline. These findings confirm and extend previous findings that certain drug combinations have superior activity against B. burgdorferi

Preparation of irradiated natural rubber latex-styrene copolymer for electrical gloves

International Nuclear Information System (INIS)

Made Sumarti Kardha

2010-01-01

Research on irradiated natural rubber latex-styrene copolymer to prepare electrical glove have been done. Vulcanization of natural rubber latex (NRL) was done by mixing 2 phr (per hundred of rubber) of normal butyl acrylate (n-BA) emulsion then irradiated with ã-ray "6"0Co at the dose of 30 kGy producing irradiated natural rubber latex (INRL). Natural rubber latex-styrene copolymers (SC) were prepared by mixing NRL and styrene monomer at styrene concentrations of 50 phr, 75 phr, 100 phr, 500 phr and irradiated at the doses of 15 kGy, 30 kGy and 45 kGy, then characterized their latex and film properties to obtain optimum SC of SC50. This optimum SC, SC50 then mixed with IRNL at the weight ratio of 0/100, 30/70, 50/50, 70/30 and 100/0, to produce irradiated natural rubber latex-styrene copolymer. The properties of copolymer rubber films made by dipping process i.e., % conversion, total solid content, latex viscosity, tensile strength, modulus 300 %, elongation at break, electrical resistance and dielectric constant were then characterized. Characterization result showed that (INRL-SC50) with 50/50 ratio irradiated at the dose of 30 kGy, have % conversion of 80.93 %, electrical resistivity of 1.73 x 10"1"4 Ohm cm and dielectric constant of 2.76 which fulfill the requirement as material for electrical gloves. (author)

Possible gasoline-induced chronic liver injury due to occupational malpractice in a motor mechanic: a case report.

Science.gov (United States)

Gunathilaka, Mahesh Lakmal; Niriella, Madunil Anuk; Luke, Nathasha Vihangi; Piyarathna, Chathura Lakmal; Siriwardena, Rohan Chaminda; De Silva, Arjuna Priyadarshin; de Silva, Hithanadura Janaka

2017-07-03

Hydrocarbon-induced occupational liver injury is a well-known clinical entity among petroleum industry workers. There are many types of hydrocarbon exposure, with inhalation being the most common. Hydrocarbon-induced occupational liver injury is a rarely suspected and commonly missed etiological agent for liver injury. We report a case of a non-petroleum industry worker with chronic liver disease secondary to hydrocarbon-induced occupational liver injury caused by chronic low-grade hydrocarbon ingestion due to occupational malpractice. A 23-year-old Sri Lankan man who was a motor mechanic presented to our hospital with decompensated cirrhosis. He had been chronically exposed to gasoline via inadvertent ingestion due to occupational malpractice. He used to remove gasoline from carburetors by sucking and failed to practice mouth washing thereafter. On evaluation, he had histologically proven established cirrhosis. A comprehensive history and workup ruled out other nonoccupational etiologies for cirrhosis. The patient's long-term occupational gasoline exposure and clinical course led us to a diagnosis of hydrocarbon-induced occupational liver injury leading to decompensated cirrhosis. Hydrocarbon-induced occupational liver injury should be considered as a cause when evaluating a patient with liver injury with possible exposure in relevant occupations.

Antimicrobial activity of latex silver nanoparticles using Calotropis procera

Directory of Open Access Journals (Sweden)

Nadia Hussein Mohamed

2014-11-01

Conclusions: It can be concluded that serum latex of Calotropis procera was found to display strong potential for the synthesis of AgNPs as antimicrobial agents through rapid reduction of silver ions (Ag+ to Ag0. The green synthesized AgNPs were found to show higher antimicrobial efficacy than crude latex.

Immune response modulation by curcumin in a latex allergy model

Directory of Open Access Journals (Sweden)

Raju Raghavan

2007-01-01

Full Text Available Abstract Background There has been a worldwide increase in allergy and asthma over the last few decades, particularly in industrially developed nations. This resulted in a renewed interest to understand the pathogenesis of allergy in recent years. The progress made in the pathogenesis of allergic disease has led to the exploration of novel alternative therapies, which include herbal medicines as well. Curcumin, present in turmeric, a frequently used spice in Asia has been shown to have anti-allergic and inflammatory potential. Methods We used a murine model of latex allergy to investigate the role of curcumin as an immunomodulator. BALB/c mice were exposed to latex allergens and developed latex allergy with a Th2 type of immune response. These animals were treated with curcumin and the immunological and inflammatory responses were evaluated. Results Animals exposed to latex showed enhanced serum IgE, latex specific IgG1, IL-4, IL-5, IL-13, eosinophils and inflammation in the lungs. Intragastric treatment of latex-sensitized mice with curcumin demonstrated a diminished Th2 response with a concurrent reduction in lung inflammation. Eosinophilia in curcumin-treated mice was markedly reduced, co-stimulatory molecule expression (CD80, CD86, and OX40L on antigen-presenting cells was decreased, and expression of MMP-9, OAT, and TSLP genes was also attenuated. Conclusion These results suggest that curcumin has potential therapeutic value for controlling allergic responses resulting from exposure to allergens.

Capacitance Regression Modelling Analysis on Latex from Selected Rubber Tree Clones

International Nuclear Information System (INIS)

Rosli, A D; Baharudin, R; Hashim, H; Khairuzzaman, N A; Mohd Sampian, A F; Abdullah, N E; Kamaru'zzaman, M; Sulaiman, M S

2015-01-01

This paper investigates the capacitance regression modelling performance of latex for various rubber tree clones, namely clone 2002, 2008, 2014 and 3001. Conventionally, the rubber tree clones identification are based on observation towards tree features such as shape of leaf, trunk, branching habit and pattern of seeds texture. The former method requires expert persons and very time-consuming. Currently, there is no sensing device based on electrical properties that can be employed to measure different clones from latex samples. Hence, with a hypothesis that the dielectric constant of each clone varies, this paper discusses the development of a capacitance sensor via Capacitance Comparison Bridge (known as capacitance sensor) to measure an output voltage of different latex samples. The proposed sensor is initially tested with 30ml of latex sample prior to gradually addition of dilution water. The output voltage and capacitance obtained from the test are recorded and analyzed using Simple Linear Regression (SLR) model. This work outcome infers that latex clone of 2002 has produced the highest and reliable linear regression line with determination coefficient of 91.24%. In addition, the study also found that the capacitive elements in latex samples deteriorate if it is diluted with higher volume of water. (paper)

Composite poly(methyl methacrylate-methacrylic acid-2-hydroxyethyl methacrylate) latex for immunoassay. The case of plasminogen.

Science.gov (United States)

Miksa, B; Wilczynska, M; Cierniewski, C; Basinska, T; Slomkowski, S

1995-01-01

Poly(methyl methacrylate-methacrylic acid-2-hydroxyethyl methacrylate) latex (ACRYLAT) was synthesized by radical precipitation polymerization. The mass median diameter (MMD) and the geometrical standard deviation (GSD) of the ACRYLAT particles were 138 nm and 1.2, respectively. The concentration of the titrable carboxylic groups in the surface layer of latex particles was equal to 8.41 x 10(-6) mol m-2. Latex was able to bind up to 2.82 x 10(-7) mol of 1-aminopyrene per 1 m2 of the surface of the latex particles due to the ionic interactions between carboxylate anions and ammonium cations of protonated 1-aminopyrene. ACRYLAT was able to immobilize covalently human serum albumin in amounts up to 0.23 mg m-2. Aggregation of ACRYLAT with immobilized HSA, induced with specific antibodies (anti-HSA), was investigated turbidimetrically. The results indicated that in the model turbidimetric immunoassay, ACRYLAT coated with HSA can be used for the detection of anti-HSA in the goat anti-HSA serum diluted from 50 to 7000-fold. Immobilization of rabbit antibodies to plasminogen (anti-Plg) to ACRYLAT via the epsilon-aminocaproic acid linkers provided particles which were used for the development of the turbidimetric immunoassay for plasminogen. In this assay plasminogen could be detected in concentration ranging from 0.75 to 75 micrograms ml-1 in the blood plasma.

Decontamination of latex gloves; Decontamination de gants en latex

Energy Technology Data Exchange (ETDEWEB)

Boutot, P; Schipfer, P; Blachere, A [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

1969-07-01

Initially the latex gloves used in controlled zones were processed after use as radioactive waste. In view of the continually increasing number used, however, the persons in charge of the SPRAR have considered the possibility of decontaminating the gloves and using them again after control. The recovery installations which have been developed were initially designed rather crudely and operated irregularly; they have been progressively improved as a result of the experience acquired; today they are more really an industrial concern, equipped with automatic machinery. In 1967 it has been possible with this set-up to recover 247000 pairs of gloves, representing nearly 70 per cent of the number treated. (author) [French] Initialement, les gants de latex utilises dans les zones controlees etaient conditionnes apres emploi comme dechets radioactifs. Mais, devant l'augmentation sans cesse croissante des quantites employees, les responsables du SPRAR ont envisage leur decontamination et leur recyclage apres controles. Les installations de recuperation mises au point, de conception artisanale et fonctionnant de maniere episodique au depart, se sont progressivement ameliorees au fur et a mesure de l'experience acquise; elles revetent aujourd'hui le caractere d'une exploitation industrielle equipee de machines automatiques. En 1967, ces nouvelles installations ont permis de recuperer 247000 paires de gants, ce qui represente pres de 70 pour cent des quantites traitees. (auteur)

Follow-up Study of Latex-allergic Health Care Workers in Japan

Directory of Open Access Journals (Sweden)

Akiko Yagami

2006-01-01

Conclusions: After avoiding latex products and following our educational suggestions, the patients' allergy symptoms had generally improved. This indicates that our countermeasures against latex allergy were largely successful.

Adaptive response induced by occupational exposures to ionizing radiation

International Nuclear Information System (INIS)

Barquinero, J.F.; Caballin, M.R.; Barrios, L.; Murtra, P.; Egozcue, J.; Miro, R.; Ribas, M.

1997-01-01

We have found a significant decreased sensitivity to the cytogenetic effects of ionizing radiation (IR) and bleomycin (BLM) in lymphocytes from individuals occupationally exposed to IR when compared with a control population. These results suggest that occupational exposures to IR can induce adaptive response that can be detected by a subsequent treatment by IR or by BLM. However, no correlation between the results obtained with both treatments was observed. A great heterogeneity in the frequencies of chromatid aberrations induced by BLM was observed. The study of the influence of different harvesting times showed that there was no correlation with the frequencies of chromatid breaks. Our results indicate that the use of BLM to detect adaptive response has several difficulties at the individual level. (author)

Morphology and film formation of poly(butyl methacrylate)-polypyrrole core-shell latex particles

NARCIS (Netherlands)

Huijs, F; Lang, J

Core-shell latex particles made of a poly(butyl methacrylate) (PBMA) core and a thin polypyrrole (PPy) shell were synthesized by two-stage polymerization. In the first stage, PBMA latex particles were synthesized in a semicontinuous process by free-radical polymerization. PBMA latex particles were

Clinical and immunologic findings of methylene diphenyl diisocyanate-induced occupational asthma in a car upholstery factory.

Science.gov (United States)

Hur, G-Y; Koh, D-H; Choi, G-S; Park, H-J; Choi, S-J; Ye, Y-M; Kim, K-S; Park, H-S

2008-04-01

Although methylene diphenyl diisocyanate (MDI) is widely used in many industries, there have been few immunological studies of MDI-induced occupational asthma. We investigated the effects of MDI exposure on the clinical and immunologic condition of workers in a single car upholstery factory. Fifty-eight MDI-exposed workers were studied. Work-related lower-respiratory symptoms (WRRS) were identified using a questionnaire. Serum-specific IgE and IgG antibodies to MDI-human serum albumin conjugate were detected by ELISA. Atopy was evaluated using a skin prick test. MDI-induced occupational asthma was confirmed in the symptomatic workers with a positive result on an MDI-specific inhalation test. Thirteen (22.4%) of the subjects complained of WRRS. MDI-induced occupational asthma was confirmed in five (8.6%) of the workers, and occupational eosinophilic bronchitis was confirmed in two (3.5%). The prevalence of specific IgG antibodies (20.7%) was higher than that of specific IgE antibodies (8.6%). The prevalence of MDI-induced occupational asthma/eosinophilic bronchitis was strongly associated with the presence of both WRRS and serum-specific IgG antibodies to an MDI-human serum albumin conjugate (Pworkers. The prevalence of MDI-induced occupational asthma was 8.6%, and MDI-induced eosinophilic bronchitis was confirmed in two workers. The presence of work-related lower-respiratory symptoms and serum-specific IgG antibodies to an MDI-human serum albumin conjugate may be used to predict MDI-induced occupational asthma/eosinophilic bronchitis in MDI-exposed workers.

Latex allergies - for hospital patients

Science.gov (United States)

... ency/patientinstructions/000499.htm Latex allergies - for hospital patients To use the sharing features on this page, ... ADAM Health Solutions. About MedlinePlus Site Map FAQs Customer Support Get email updates Subscribe to RSS Follow ...

Installing fonts in LaTeX a user's experience

NARCIS (Netherlands)

Hanssen, F.T.Y.

2003-01-01

This paper presents a user's experience with installing fonts for use in LaTeX. It will be shown that it is not hard to make a standard Type 1 font work, if you use modern font installation software for LaTeX. All the steps necessary to install the example fonts will be shown. The example fonts used

Radioactive iodine (125I) labeling of latex particles

International Nuclear Information System (INIS)

Parikh, G.C.; Ho, C.K.

1977-01-01

The invention disclosed in this application is directed towards developing a radioiodination method which is applicable to the labeling of 2.02 micrometer (μm) and 0.37 micrometer (μm) diameter polyvinyltoluene latex particles that have been used as an immunoadsorbent. More particularly the overall method includes using an oxidation-reduction chemical reaction for tagging latex particles. Two methods are described. One, the hydrochloric acid method; and two, the nitric acid method

Rapid latex agglutination test for the serodiagnosis of human brucellosis

NARCIS (Netherlands)

Abdoel, Theresia H.; Smits, Henk L.

2007-01-01

We developed and evaluated a user-friendly latex agglutination assay for the serodiagnosis of human brucellosis. The assay was obtained by coating colored latex beads with Brucella lipopolysaccharides and drying of the activated beads onto white agglutination cards. Individual cards were sealed in a

LOL2 and LOL5 loci control latex production by laticifer cells in Euphorbia lathyris.

Science.gov (United States)

Castelblanque, Lourdes; Balaguer, Begoña; Marti, Cristina; Orozco, Marianela; Vera, Pablo

2018-06-07

Laticifers are specialized plant cells capable of indefinite elongation that ramify extensively and are responsible for latex biosynthesis and accumulation. However, the mechanisms underlying laticifer cell differentiation, growth and production of latex remain largely unknown. In a search for mutants showing enhanced accumulation of latex we identified two LOT OF LATEX (LOL) loci in Euphorbia lathyris. lol2 and lol5 mutants show enhanced production of latex contained within laticifer cells. The recessive lol2 mutant carries increased biosynthesis of the plant hormone jasmonoyl-isoleucine (JA-Ile) and therefore establishes a genetic link between jasmonic acid (JA) signaling and latex production in laticifers. Instead, heightened production of latex in lol5 plants obeys to enhanced proliferation of laticifer cells. Phylogenetic analysis of laticifer-expressed genes in E. lathyris and in two other latex-bearing species, Euphorbia corallioides and Euphorbia palustris, allowed the identification of canonical JA responsive elements present in the gene promoter regions of laticifer marker genes. Moreover, we identified that the hormone JA functions not as a morphogen for laticifer differentiation but as a trigger for the fill out of laticifers with latex and the associated triterpenoids. The identification of LOL loci represents a further step towards the understanding of mechanisms controlling latex production in laticifer cells. No claim to original US Government works New Phytologist © 2018 New Phytologist Trust.

Cement-Induced Chromate Occupational Allergic Contact Dermatitis.

Science.gov (United States)

Kridin, Khalaf; Bergman, Reuven; Khamaisi, Mogher; Zelber-Sagi, Shira; Weltfriend, Sara

2016-01-01

Hexavalent chromium in cement is a common cause of occupational allergic contact dermatitis (OACD). Analysis of patch test data during 1999 to 2013 was done. Patients with cement-induced chromate OACD filled the Dermatology Life Quality Index, graded 1 to 5. Of 4846 consecutive patients who were patch tested, 146 (3%) were chromate-sensitive. Of 46 (31.5%) who presented with chromate OACD, 27 (59%) had cement-induced chromate OACD. The proportion of chromate-sensitive patients with clinically relevant cement exposure increased from 7.7% in 2002 to 2004 to 28.7% in 2011 to 2013 (P = 0.04). The median age of presentation was younger than for other chromate-sensitive patients (32 vs 42 years). Hand eczema (88.9%) was the most frequent clinical presentation. Of the 27 with cement-induced chromate OACD, 21 (77.8%) had ongoing dermatitis at the time of the review. Although 14/27 (51.9%) changed their occupation to avoid exposure to cement, symptoms persisted in 9/14 (64.3%). Prolonged exposure to cement before development of symptoms was associated with chronicity. All the symptomatic patients experienced at least a moderate effect on their quality of life (grade 3 or higher on the Dermatology Life Quality Index). We recommend the adoption of the European legislation in Israel, to reduce the prevalence of chromate OACD from cement.

Allergenicity of latex rubber products used in South African dental ...

African Journals Online (AJOL)

Fourteen latex examination gloves (powdered and non-powdered) and five dental rubber dams, representing 6 brands, from five dental academic institutions were analysed for latex allergens and total protein. Total protein content was determined using the BioRad DC protein assay kit and natural rubber allergen levels ...

Comparing the level of dexterity offered by latex and nitrile SafeSkin gloves.

Science.gov (United States)

Sawyer, Jo; Bennett, Allan

2006-04-01

An increase in the occurrence of latex allergy has been concurrent with the increasing use of latex gloves by laboratory and healthcare workers. In recent years nitrile gloves have been used to replace latex gloves to prevent latex allergy. Nitrile gloves offer a comparable level of protection against chemical and biological agents and are more puncture resistant. However, if manual dexterity is compromised by nitrile gloves to a greater degree than latex then this may increase the risk of sharps injuries. The Purdue pegboard test, which measures both gross and fine finger dexterity, was used to test the dexterity levels of two glove types used at HPA CEPR; Kimberly-Clark SafeSkin nitrile and latex laboratory gloves. There was a statistically significant 8.6% increase in fine finger dexterity provided by latex compared with nitrile SafeSkin laboratory gloves but no difference in gross dexterity between the glove types. There was no significant relationship between glove dexterity and age or gender. The selection of glove size was influenced by the digit length of participants. Moreover, those with longer, thinner fingers appeared to have an advantage when using nitrile SafeSkin gloves. The level of dexterity provided by latex and nitrile SafeSkin gloves for tasks on a gross dexterity level are comparable and health workers will benefit from the non-allergenic properties of nitrile. For tasks requiring fine finger dexterity nitrile SafeSkin gloves may impede dexterity. Despite this, the degree of restriction appears to have a negligible impact on safety in this study when compared with the risk of latex sensitization and subsequent allergy. In addition to glove material, working practices must also take into account glove size, fit, grip and thickness, as these factors can all influence dexterity.

Natural rubber latex: determination and interpretation of flow curves

Directory of Open Access Journals (Sweden)

Harrison Lourenço Corrêa

2015-08-01

Full Text Available AbstractAs consumers become more demanding, the importance grows of guaranteeing the quality of products. The employment of reliable testing techniques that assure the origin and characteristics of the inputs used by industry is a key factor in this respect. In the rubber processing industry, the most commonly used characterization tests include determination of the total solids and dry rubber content, mechanical stability, odor, color and presence of volatile compounds, among others. For the most part, these tests are sufficient for the latex transformation industry. However, in situations where there is a need to know the behavior of latex in reaction to the mechanical forces of machines (mixers, pumps, etc., other tests must be used. Rheological tests to determine viscoelastic data by means of plotting flow curves combined with the application of theoretical models can provide important details for characterization of different types of latex. This article presents the protocol employed by the Rheology and Image Laboratory of Rio de Janeiro State University (UERJ for the rheological study of Brazilian latex. The samples analyzed came from the state of São Paulo.

Latex glove sensitivity amongst diagnostic imaging healthcare personnel: a self-reporting investigation

International Nuclear Information System (INIS)

Healy, Jan; Brennan, Patrick C.; Bowden, Julie Anne

2003-01-01

The use of latex gloves has risen dramatically among healthcare workers resulting in an increase in the number of workers experiencing reactions to gloves. Little evidence of reactions among Irish healthcare workers is available. The current, self-reporting study investigated the prevalence to latex gloves amongst four professional groups within three Diagnostic Imaging Departments. Prevalence is similar to that demonstrated elsewhere with 18.3% of individuals expressing latex associated symptoms. Symptoms included itching and redness of hands, dry cracked skin, soreness of eyes and upper respiratory tract complaints. These results indicate that latex hypersensitivity is a real problem amongst Irish healthcare workers. This preliminary work provides the basis of a much larger controlled study currently being planned

Radiation vulcanization of natural rubber latex with low energy accelerator

Energy Technology Data Exchange (ETDEWEB)

Haque, Emdadul; Makuuchi, Keizo; Ikeda, Kenichi; Yoshii, Fumio; Kume Tamikazu [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Mitomo, Hiroshi [Gunma Univ., Faculty of Engineering, Department of Biological and Chemical Engineering, Kiryu, Gunma (Japan)

2001-03-01

The radiation vulcanization of natural rubber latex (RVNRL) with the recently installed electron beam (EB) pilot plant at Takasaki Radiation Chemistry Research Establishment, Takasaki, Japan has been discussed. The accelerating voltage and beam current of the plant are 250 kV and 10 mA respectively. The plant has a reaction vessel with the capacity of 18 liters latex to irradiate at a time. In order to obtain a suitable setting of experimental for RVNRL under EB of the plant the parameters such as irradiation time, defoamer concentration, volume of latex, beam current etc. are being optimized by varying the individual parameter at a constant set of the other variables. (author)

Latex-modified fiber-reinforced concrete bridge deck overlay : construction/interim report.

Science.gov (United States)

1993-06-01

Latex-modified concrete (LMC) is Portland cement concrete (PCC) with an admixture of latex. LMC is considered to be nearly impermeable to chlorides and is extensively used to construct bridge deck overlays. Unfortunately, some of these overlays have ...

[Natural history of occupational hearing loss induced by noise].

Science.gov (United States)

de Almeida, S I; Albernaz, P L; Zaia, P A; Xavier, O G; Karazawa, E H

2000-01-01

To evaluate the clinical and audiometric characteristics of occupational hearing loss induced by noise, according to age and time of exposition in years. 222 patients with occupational sensorineural hearing loss induced by noise were studied retrospectively, correlating the auditive clinical claims, alterations of audiometric thresholds at frequencies of 250 Hz to 8000 Hz, speech discrimination indicator with age and time of exposure. As a control group were used the audiometric threshold of a population of same medium age, without morbid antecedents of hearing illness, as preconized by ISO 1999 (1990). The group were divided into subgroups and three decades of exposure were analyzed. It was verified that the clinical claims of hipoacusia increases according to the age and time of exposure. The frequency of tinnitus is constant. The audiometric thresholds in the second decade of exposure present variations that depend on the age. The several audiometric curves are parallel, but they are not horizontal. The worst thresholds were found in the high frequencies from 3000 Hz to 8000 Hz, as a clinical and physiopathological consequences of the commitment of basal areas of cochlea. The speech discrimination showed to be worst according to the increase of age and time of exposure. Patients with hearing loss disacusia induced by occupational noise present characteristic audiometric thresholds that vary according to age and time of exposure to noise. These characteristics defined and resumed in audiometric curves can constitute a standard of comparison, evaluation and control for exposed populations.

Identification and characterization of Euphorbia nivulia latex proteins.

Science.gov (United States)

Badgujar, Shamkant B; Mahajan, Raghunath T

2014-03-01

The protein profile of latex of Euphorbia nivulia Buch.-Ham. is established. Three new proteins viz., Nivulian-I, II and III have been purified to homogeneity from the latex. The relative molecular masses of Nivulian-I, II and III are 31,486.985, 43,670.846 and 52,803.470 Da respectively. Nivulian-I is a simple type of protein while Nivulian-II and III are glycoproteins. Peptide mass fingerprint analysis revealed peptides of these proteins match with Tubulin alpha-1 chain of Eleusine indica, Maturase K of Banksia quercifolia and hypothetical protein of Zea mays respectively. Tryptic digestion profile of Nivulian-I, II and III, infer the exclusive nature of latex origin proteins and may be new and are additive molecules in the dictionaries of phytoproteins or botany. This is the first of its kind, regarding characterization and validation of Nivulian-I, II and III with respect to peptide sequencing. Copyright © 2013 Elsevier B.V. All rights reserved.

Antimalarial Anthrone and Chromone from the Leaf Latex of Aloe ...

African Journals Online (AJOL)

In Ethiopian traditional medicine, the leaf latex of Aloe debranan Chrstian is used for the treatment of several diseases including malaria. In an ongoing search for effective, safe and cheap antimalarial agents from plants, the leaf latex of A. debrana was tested for its in vivo antimalarial activity, in a 4-day suppressive assay ...

Polylactide/Montmorillonite Hybrid Latex as a Barrier Coating for Paper Applications

Directory of Open Access Journals (Sweden)

Davide Bandera

2016-03-01

Full Text Available We developed a paper coating for the potential application in food packaging based on polylactide and montmorillonite. It is applied to the paper in the form of a stable, water-based latex with a solid content of 25–28 wt %. The latex is prepared from a commercially available polylactide, surfactants, montmorillonite, a plasticizer, chloroform (to be removed later and water by an emulsion/solvent evaporation procedure. This coating formulation is applied to the paper substrate by bar-coating, followed by hot-pressing at 150 °C. The coated papers achieved up to an 85% improvement in water vapor transmission rates when compared to the pristine papers. The coating latex is prepared from inexpensive materials and can be used for a solvent-free coating process. In addition, the ingredients of the latex are non-toxic; thus, the coated papers can be safely used for food packaging.

Study of Antibacterial Activity and Bacteriology of Latex from Asclepias syriaca L

Science.gov (United States)

McCay, Steven; Mahlberg, Paul

1973-01-01

Whole and fractionated latex of Asclepias syriaca was tested for antimicrobial or growth-promoting activity with 16 genera and species of bacteria. Latex and extracted fractions (distilled water, acetic acid, sodium bicarbonate, sulfuric acid, and ethyl ether) possessed no detectable antimicrobial activity. Comparison of growth curves of selected bacteria incubated with serum and rubber fractions, as well as controls, revealed no detectable inhibition of growth, except for a slight inhibitory response to autoclaved serum. Most bacteria were capable of utilizing latex for a substrate as indicated by the increased growth rate in the exponential phase. The stationary phase was entered simultaneously by both the treated cultures and the controls. Various bacteria cultured in a litmus latex mixture yielded populations which ranged from <104 organisms/ml for Lactobacillus casei, Staphylococcus aureus and Micrococcus lysodeikticus to 1.1 × 1010 organisms/ml for Clostridium acetobutylicum. Whole latex, as well as the serum and rubber fractions, support the growth of various bacteria, but under field conditions there is no evidence for systemic infection of this type of cell by bacteria. PMID:4790590

Occupational cancer

International Nuclear Information System (INIS)

Alderson, M.

1986-01-01

This book aims to review the occurrence and causes of occupational cancer and is aimed at assisting medical and safety staff, management and health and safety representatives. It is presented in the following chapters: 1) Epidemiological method 2) Agents causing occupationally induced cancer, including radiation 3) Occupations associated with risk of cancer 4) Aetiology of cancer 5) Control of occupationally induced cancer, research, prevention, legislation, national and international bodies, control of specific occupational carcinogens, including irradiation. (U.K.)

High concentrations of natural rubber latex allergens in gloves used ...

African Journals Online (AJOL)

Introduction. Gloves made of natural rubber latex (NRL) are commonly used by healthcare workers because of their good qualities. However, allergic reactions to latex allergens are still commonly reported. Objective. To measure the concentrations of Hev b 1, Hev b 3, Hev b 5 and Hev b 6.02 allergens in gloves used by a ...

Application of radiation vulcanized natural rubber latex in Indonesia

International Nuclear Information System (INIS)

Soebianto, Y.S.; Wiwik Sofiarti; Razzak, M.T.

1996-01-01

The center has carried out R and D of Radiation Vulcanization Natural Rubber Latex (RVNRL) technology and introduced it to the industries since the inauguration and operation of the latex pilot plant in 1983. After years of experiences and the environmental consideration, n-butylacrylate (n-BA) has replaced CCI, as the sensitizer. Until now the introduction program shows that radiation vulcanized latex is more suitable for home industries than large industries. The obstacle of the program is the marketing of the dipped products. In spite of these problems, the introduction of this technology to the people in some undeveloped area of Java has supported the national program to improve their living standard. The problems of nitrosamine and protein allergic have turn up RVNRL to be the substitute of sulfur vulcanized latex in the future. The cooperation with a national condom manufacturer (PT Mitra Banjaran) has applied RVNRL for condom production in the large scale. Soft condoms with less probability of pinhole are obtained, but the technical problem is stickiness after pilling. Supply to a baby teat and a rubber thread manufacturer offers great advantages by not using any chemicals. In spite of the advantages, the problem of latex viscosity for dipping and the low modulus of elasticity of the threads arise. Through those input CAIR-BATAN is conducting the research and development in improving the crosslinking among the rubber particles that are supposed to be the reason of the stickiness and low modulus of elasticity. This effort is expected to be able to broaden the application of RVNRL, and it will be achieved only by the involvement of rubber chemist, rubber technologist, and radiation chemist

Possible gasoline-induced chronic liver injury due to occupational malpractice in a motor mechanic: a case report

OpenAIRE

Gunathilaka, Mahesh Lakmal; Niriella, Madunil Anuk; Luke, Nathasha Vihangi; Piyarathna, Chathura Lakmal; Siriwardena, Rohan Chaminda; De Silva, Arjuna Priyadarshin; de Silva, Hithanadura Janaka

2017-01-01

Background Hydrocarbon-induced occupational liver injury is a well-known clinical entity among petroleum industry workers. There are many types of hydrocarbon exposure, with inhalation being the most common. Hydrocarbon-induced occupational liver injury is a rarely suspected and commonly missed etiological agent for liver injury. We report a case of a non-petroleum industry worker with chronic liver disease secondary to hydrocarbon-induced occupational liver injury caused by chronic low-grade...

Pilot scale experiments on radiation vulcanization of NR latex

International Nuclear Information System (INIS)

Ridwan, M.

1985-01-01

The potential of irradiated latex as raw material of commercial use is under testing on pilot plant scale in Indonesia which has 225 kCi Co-60 irradiation facility and can irradiate 1000 tonnes of centrifuged latex per annum. The facility was jointly designed by BATAN of Indonesia and JAERI of Japan and was jointly financed by UNDP/IAEA, Government of Japan and Government of Indonesia under UNDP/IAEA Regional Cooperative Agreement Project on Industrial Application of Isotopes and Radiation Technology. The facility is a water pool type and can accommodate 400 kCi Co-60. The Co-60 rack has two shapes, plate and cylindrical shapes. The plate shape source is used for natural rubber latex irradiation and the cylindrical one is used for other irradiation services. The vulcanization system consists of three major components: emulsification unit, mixing unit and vulcanization reactor. The first two components are located outside shielded room while the third one in irradiation room. The radiation vulcanization process is a much simpler energy saving process compared to the conventional thermal process which has two vulcanization steps before and after dipping. The physical and mechanical properties of irradiated NR latex are comparable to those of sulfur vulcanized. (author)

Molluscicidal effect of Euphorbia umbellata (Pax Bruyns latex on Biomphalaria glabrata, Schistosoma mansoni host snail

Directory of Open Access Journals (Sweden)

Luciana Patrícia Lima Alves Pereira

2017-12-01

Full Text Available ABSTRACT Euphorbia umbellata (Pax Bruyns is an easily cultivated shrub, with occurrence in the tropical regions of the American and African continents. Chemical studies have revealed that the latex of this plant is rich in terpene compounds, which are highly toxic to snails Biomphalaria glabrata (Basommatophora: Planorbidae. The aim of this study was to evaluate the chemical composition and molluscicidal activity of the latex produced by E. umbellata, as well as the safety of its application in aquatic environments. The concentration of latex that killed 90% of the exposed snails after 24 h exposure (LC90 was 3.69 mg/L. Toxicity bioassays using Danio rerio (zebrafish revealed that these animals were less susceptible to latex than planorbids. However, it is important to perform other toxicity tests to ensure the feasibility of using latex to control populations of mollusks that contribute to schistosomiasis transmission. A phytochemical screening performed with the E. umbellata latex identified the triterpenoid and coumarin class. Further studies are warranted to isolate, identify, and test the active compounds of E. umbellata latex in B. glabrata.

Study on irradiation condition in radiation vulcanization of natural rubber latex

International Nuclear Information System (INIS)

Zhu Nankang; Wang Chunlei; Makuuchi, K.; Yoshii, F.

1996-01-01

The effect of gamma rays irradiation dose rates on RVNRL preparation was studied using Malaysian latex added with O.2 phr of KOH and 5 phr n-BA. The results showed, to ensure the tensile strength of the latex film meet the requirement, when applying vulcanisation doses, Dv of 20 kGy 20 and 15 kGy, irradiation dose rates should not be greater than 0. 49 kGy/hr and 1. 6 kGy/hr respectively. Its was found that within the storage time of 20 days there was no change in the physical properties of the latex films

Aggregation and charging of sulfate and amidine latex particles in the presence of oxyanions.

Science.gov (United States)

Sugimoto, Takuya; Cao, Tianchi; Szilagyi, Istvan; Borkovec, Michal; Trefalt, Gregor

2018-08-15

Electrophoretic mobility and time resolved light scattering are used to measure the effect on charging and aggregation of amidine and sulfate latex particles of different oxyanions namely, phosphate, arsenate, sulfate, and selenate. In the case of negatively charged sulfate latex particles oxyanions represent the coions, while they represent counterions in the case of the positively charged amidine latex. Repulsive interaction between the sulfate latex surface and the coions results in weak ion specific effects on the charging and aggregation. On the other hand the interaction of oxyanions with the amidine latex surface is highly specific. The monovalent dihydrogen phosphate ion strongly adsorbs to the positively charged surface and reverses the charge of the particle. This charge reversal leads also to the restabilization of the amidine latex suspension at the intermediate phosphate concentrations. In the case of dihydrogen arsenate the adsorption to amidine latex surface is weaker and no charge reversal and restabilization occurs. Similar differences are seen between the sulfate and selenate analogues, where selenate adsorbs more strongly to the surface as compared to the sulfate ion and invokes charge reversal. The present results indicate that ion specificity is much more pronounced in the case of counterions. Copyright © 2018 Elsevier Inc. All rights reserved.

Managing latex allergies at home

Science.gov (United States)

... Associate Clinical Professor of Medicine, Division of Allergy, Immunology, and Rheumatology, Georgetown University Medical School, Washington, DC. Also reviewed by David Zieve, MD, MHA, Isla Ogilvie, PhD, and the A.D.A.M. Related MedlinePlus Health Topics Latex Allergy Browse the Encyclopedia A.D.A. ...

Effect of heterogeneous distribution of crosslink density on physical properties of radiation vulcanized NR (Natural Rubber) latex film

International Nuclear Information System (INIS)

Keizo Makuuchi; Fumio Yoshii; Miura, H.; Murakami, K.

1996-01-01

Thus a study has been carried out to investigate the effect of particle to particle variation in crosslink density on physical properties of radiation vulcanized NR latex film. NR latex was irradiated in small bottle by γ rays without vulcanization accelerator to provide latex rubber particles having homogeneous distribution of crosslink density. The doses were 30, 50, 100, 250, 300, 400, 500 and 600 kGy. Weight swelling ratio, gel fraction, tensile strength and elongation at break of the latex film from the mixed latex were measured. The vulcanization dose of this latex was 250 kGy. Then the two different latexes were mixed in a such way to adjust the average dose of 250 kGy to prepare a latex consisting of rubber particles having heterogeneous distribution of crosslink density. Tensile strength of the latex film was depressed by mixing. The reduction increased with increasing the decrease of gel fraction by mixing. However the reduction was not serious when the dose difference of two latexes was less than 200 kGy

Radiation vulcanization of natural rubber latex using irradiation n-butyl acrylate aqueous emulsion as sensitizer

International Nuclear Information System (INIS)

Vo Van Thien; Nguyen Quoc Hien; Keizo Makuuchi; Fumio Yoshii

2000-01-01

Natural rubber latex was vulcanized by gamma radiation with n-butyl acrylate aqueous emulsion irradiated at dose of 1.5 kGy as sensitizer. The total solid content of latex increases on the irradiation dose. The viscosity of latex on the standing time was investigated and became stable after one month of storage. The gel content of latex films increasing with irradiation dose and attained more than 94% at dose of 10 kGy. Tensile strength of films reached the values of 31MPa; 30 Mpa and 25 Mpa at vulcanization doses of 20 kGy, 15 kGy and 8 kGy for the concentrations of sensitizer 7 phr, 9 phr and 13 phr respectively. Elongation at break decreases as increasing dose. Tear strength of rubber films was from 30-40 N/mm. The tackiness of latex films decreases and smell of vulcanized latex is almost negligible. (author)

Occupational health research priorities in Malaysia: a Delphi study

OpenAIRE

Sadhra, S; Beach, J; Aw, T; Sheikh-Ahmed, K

2001-01-01

OBJECTIVES—As part of a consultancy project on occupational health, the Delphi method was used to identify research priorities in occupational health in Malaysia.
METHODS—Participation was sought from government ministries, industry, and professional organisations, and university departments with an interest in occupational and public health. Two rounds of questionnaires resulted in a final list of priorities, with noticeable differences between participants depending on whether they worked i...

Synthesis and Characterization of Core-Shell Acrylate Based Latex and Study of Its Reactive Blends

Directory of Open Access Journals (Sweden)

Ying Nie

2008-03-01

Full Text Available Techniques in resin blending are simple and efficient method for improving the properties of polymers, and have been used widely in polymer modification field. However, polymer latex blends such as the combination of latexes, especially the latexes with water-soluble polymers, were rarely reported. Here, we report a core-shell composite latex synthesized using methyl methacrylate (MMA, butyl acrylate (BA, 2-ethylhexyl acrylate (EHA and glycidyl methacrylate (GMA as monomers and ammonium persulfate and sodium bisulfite redox system as the initiator. Two stages seeded semi-continuous emulsion polymerization were employed for constructing a core-shell structure with P(MMA-co-BA component as the core and P(EHA-co-GMA component as the shell. Results of Transmission Electron Microscopy (TEM and Dynamics Light Scattering (DLS tests confirmed that the particles obtained are indeed possessing a desired core-shell structural character. Stable reactive latex blends were prepared by adding the latex with waterborne melamine-formaldehyde resin (MF or urea-formaldehyde resin (UF. It was found that the glass transition temperature, the mechanical strength and the hygroscopic property of films cast from the latex blends present marked enhancements under higher thermal treatment temperature. It was revealed that the physical properties of chemically reactive latexes with core-shell structure could be altered via the change of crosslinking density both from the addition of crosslinkers and the thermal treatment.

Progress in radiation vulcanization of natural rubber latex

International Nuclear Information System (INIS)

Makuuchi, Keizo

2000-01-01

Vulcanization dose defined as the radiation dose at which cross-linked natural rubber in latex has the maximum tensile strength can be reduced by adding carbon tetrachloride as a reaction accelerator. The radiation vulcanization of natural rubber latex was selected as one of regional projects of IAEA in 1989 and a pilot plant was built in Jakarta. The products from it were evaluated during 1983-1985, followed by IAEA decision to support the continued R and D study at Takasaki, JAERI. Various factors to improve the properties of the products have been studied. Several advantages of the process over conventional method, such as absence of N-nitrosoamines, low cytotoxicity, decomposability in the environment, transparency and softness, were confirmed. The technology has been transferred toward commercial application in Thailand, and pilot plants being set up in Indonesia, India, Malaysia and Thailand. Moreover, the process was found to be effective in reducing protein remaining in natural rubber latex products and the initial investment and irradiation cost was found to be greatly reduced by employing low energy electron accelerator. This paper reviews such progress. (S. Ohno)

Extractable protein of radiation vulcanized natural rubber latex

International Nuclear Information System (INIS)

Soebianto, Y.S.; Ratnayake, U.M.; Makuuchi, Keizo; Yoshii, Fumio; Kume, Tamikazu

2000-01-01

Protein remained in the latex products are reported to cause serious allergy. A new method to reduce the protein level in the latex products by irradiation is reported. Water soluble protein (WSP) solution (10%) was added into radiation vulcanized NR latex (RVNRL) in three different processes. The amount of WSP was 3 phr. It was only added to RVNRL (standard), added to re-centrifuged RVNRL (pre-centrifugation), and added to RVNRL followed by centrifugation (post-centrifugation). The protein content was determined by enhanced BCA method, and identified by SDS-PAGE. Extractable protein (EP) from the rubber has been reduced up to the minimum protein detection by combining WSP addition and centrifugation. Short leaching time (20-30 min.) can be achieved after the combine treatment, and SDS-PAGE confirms the reduction of soluble protein in the serum phase, and disappearance of protein bands in the rubber extract. Protein-WSP interaction produces water soluble complex, and removed by centrifugation. The efficiency of protein removal by WSP depends on its molecular weight of WSP which relates to its water solubility. (author)

Improving of Water Resistance of Asphalt Concrete Wearing Course Using Latex-Bitumen Binder

Directory of Open Access Journals (Sweden)

Siswanto Henri

2017-01-01

Full Text Available It is well known that presence of water in a bituminous mix is a critical factor which can lead to premature failure of flexible pavements. This requires solutions one of which is to formulate an asphalt mix that has a high resistance to moisture and one way to do this is to mix latex with the asphalt mix. The purpose of this experimental study was to investigate the effect of water on Marshall stability of asphalt concrete wearing course (ACWC made with a latex-bitumen binder. Latex-bitumen was mixed with aggregate and four levels of latex content were investigated in this study, namely, 0%, 2%, 4% and 6% respectively by weight of asphalt. Wet procces was used in the blending of mixtures. The procedure used to obtain the optimum binder contents conformed to the Marshall procedure (SNI 06-2489-1991. Six Marshall specimens at optimum binder content were prepared for each binder mix investigated. Three of six specimens from each group were tested under Marshall standards. The remaining specimens were tested by immersion in a bath at 60°C for 24 hours. The Marshall index of retained stability was used to evaluate the effect of water on the Marshall stability of ACWC. The results indicated that the addition of up to 4% latex to ACWC mix increased the retained Marshall stability, whereas the addition of latex above 4% decreased the retained stability of the mixture. The addition of 4% CRM significantly improved the retained stability of the mixture and was the best latex – ACWC mix.

IMMEDIATE AND DELAYED HYPERSENSITIVITY REACTIONS TO LATEX GLOVES IN A DENTAL STUDENT. A case report.

Directory of Open Access Journals (Sweden)

Iliyana Stoeva

2011-08-01

Full Text Available The article presents a case of dental student with immediate and delayed hypersensitivity reaction to latex gloves. Symptoms appeared during the second year of regularly using of latex gloves. The student was with no history of allergies and no previous exposure to latex products.

Morphologic evaluation of the use of a latex prosthesis in videolaparoscopic inguinoplasty: an experimental study in dogs Avaliação morfológica da utilização de prótese de latex na inguinoplastia videolaparoscópica: estudo experimental em cães

Directory of Open Access Journals (Sweden)

Luiz Henrique de Sousa

2011-01-01

Full Text Available PURPOSE: To evaluate the morphological aspects of the behavior of 4 types of latex biomembranes implanted in preperitoneal videolaparoscopic inguinoplasty. METHODS: Sixteen inguinoplasties were performed in 12 dogs: group 1 received an impermeable latex biomembrane in the right inguinal region and a prolene prosthesis, as control, in the contralateral inguinal region; groups 2, 3 and 4 received latex biomembranes respectively containing impermeable polyamide, 1-mm thick porous polyamide and 0.5-mm thick porous polyamide. Macro- and microscopic evaluations of the inguinal region and of the removed implants were made on the 7th, 14th, 21st and 28th days in group 1 and on the 28th postoperative day in the other groups. RESULTS: We observed absence of hematoma, seroma and infection; presence of tortuosities; induction of vascular neoformation, inflammatory reaction and collagen deposition, and full encystment of the latex biomembranes, except that with fine porous polyamide, which was partially incorporated, with the formation of microcysts. No latex biomembrane induced fibrosis as observed in the prolene control group. CONCLUSIONS: The biomembranes maintain induction of the healing process without fibrosis, are fully encysted and, except for the one with fine porous polyamide, are not incorporated into adjacent tissues. The latex biomembrane, with or without polyamide, is not recommended as a separate material for preperitoneal inguinoplasty.OBJETIVO: Avaliar aspectos morfológicos do comportamento de 4 tipos de biomembranas de latex, colocadas pré-peritonealmente em cães, por inguinoplastia videolaparoscópica. MÉTODOS: Dezesseis inguinoplastias em 12 cães: grupo 1, com biomembrana de latex impermeável inguinal direita em quatro cães e prótese de prolene, como controle, contra-lateral; grupos 2, 3 e 4, com biomembrana de latex respectivamente de poliamida impermeável, poliamida porosa com 1mm de espessura e poliamida porosa com 0,5mm de

Preparation of novel film-forming armoured latexes using silica nanoparticles as a pickering emulsion stabiliser.

Science.gov (United States)

Shiraz, Hana; Peake, Simon J; Davey, Tim; Cameron, Neil R; Tabor, Rico F

2018-05-15

Film-forming polymer latex particles of diameter acrylate (BA) as co-monomers, potassium persulphate (KPS) as an initiator and a commercially available colloidal nano-silica (Ludox®-TM40). It was found that pH control before polymerisation using methacrylic acid (MAA) facilitated the formation of armoured latexes, and mechanistic features of this process are discussed. An alternative, more robust protocol was developed whereby addition of vinyltriethoxysilane (VTES) to control wettability resulted in latexes completely armoured in colloidal nano-silica. The latexes were characterised using SEM, cryo-TEM and AFM imaging techniques. The mechanism behind the adsorption was investigated through surface pressure and contact angle measurements to understand the factors that influence this irreversible adsorption. Results indicate that nanoparticle attachment (but intriguingly not latex size) is dependent on particle wettability, providing new insight into the formation of nanoparticle-armoured latexes, along with opportunities for further development of diversely functionalized inorganic/organic polymer composite particles. Copyright © 2018 Elsevier Inc. All rights reserved.

Science and technology of rubber reclamation with special attention to NR based waste latex products

NARCIS (Netherlands)

Rajan, V.V.; Dierkes, Wilma K.; Joseph, R.; Noordermeer, Jacobus W.M.

2006-01-01

A comprehensive overview of reclamation of cured rubber with special emphasis on latex reclamation is depicted in this paper. The latex industry has expanded over the years to meet the world demands for gloves, condoms, latex thread, etc. Due to the strict specifications for the products and the

The physicochemical quality and meat microstructure of post laying hen with addition of Biduri (Calotropis gigantea) latex extract

Science.gov (United States)

Nuhriawangsa, A. M. P.; Hertanto, B. S.; Kartikasari, L. R.; Swastike, W.; Cahyadi, M.; Rasid, S.

2018-01-01

The objective of this study was to evaluate the effect of extract level of Biduri latex on the meat quality of laying hens. The materials of this research were Biduri latex and thigh meat from hens strain Lohman. The latex was tapped from a young tissue stem and centrifuged for its supernatant. Meats were smeared with latex, punctured and incubated for 30 minutes. Concentrations of latex were 0, 3, 6 and 9% from the weight of meat (w/w). The variables were water, dissolved protein, crude fat content, tenderness and microstructure of meat. The statistical analysis method using ANOVA and if there was a mean difference, Duncan test was used. Descriptive analysis was used for microstructures of meat by comparing its hydrolysis conditions. The study showed that fat had significant difference (P meat structure. The fat content increased with addition of 3% latex. The value of dissolved protein increased but tenderness decreased by addition extract of 6% latex. The addition of Biduri latex extract showed that hydrolysis in the microstructure of meat. The addition of 6% latex was the best meat quality.

Latex Rubber Gloves as a Sampling Dosimeter Using a Novel Surrogate Sampling Device.

Science.gov (United States)

Sankaran, Gayatri; Lopez, Terry; Ries, Steve; Ross, John; Vega, Helen; Eastmond, David A; Krieger, Robert I

2015-01-01

Pesticide exposure during harvesting of crops occurs primarily to the workers' hands. When harvesters wear latex rubber gloves for personal safety and hygiene harvesting reasons, gloves accumulate pesticide residues. Hence, characterization of the gloves' properties may be useful for pesticide exposure assessments. Controlled field studies were conducted using latex rubber gloves to define the factors that influence the transfer of pesticides to the glove and that would affect their use as a residue monitoring device. A novel sampling device called the Brinkman Contact Transfer Unit (BCTU) was constructed to study the glove characteristics and residue transfer and accumulation under controlled conditions on turf. The effectiveness of latex rubber gloves as sampling dosimeters was evaluated by measuring the transferable pesticide residues as a function of time. The validation of latex rubber gloves as a residue sampling dosimeter was performed by comparing pesticide transfer and dissipation from the gloves, with the turf transferable residues sampled using the validated California (CA) Roller, a standard measure of residue transfer. The observed correlation (Pearson's correlation coefficient R(2)) between the two methods was .84 for malathion and .96 for fenpropathrin, indicating that the BCTU is a useful, reliable surrogate tool for studying available residue transfer to latex rubber gloves under experimental conditions. Perhaps more importantly, these data demonstrate that latex gloves worn by workers may be useful quantifiable matrices for measuring pesticide exposure.

Preparation of composites of national rubber latex (NRL) - portland cement mould. Vol. 3

International Nuclear Information System (INIS)

Dessouki, A.M.; Taher, N.H.; El-Nahas, H.H.

1996-01-01

The aim of this study is to prepare some polymeric mould using national rubber latex (NRL) - portland cement composites based on a delayed- action mechanism. Factors affecting the preparation process such as concentration, mixing percentage, additives and their effect on what is regarded as a delayed action coacervant combination was studied. Composites of national latex (NRL) - portland cement would were prepared as two separate parts. The stabilized natural rubber latex (NRL) 100 parts with hydroxy ethyl cellulose (HEC) 2 parts as stabilizer and a delayed - action coacervant (sodium meta silicate as a delaying agent) 5 parts on one hand and the dry blend of cement 65 parts soluble in 65 parts of water as a paste on the other hand were mixed thoroughly on site. (HEC) was added to the rubber latex to prevent the coagulation of the rubber latex with the electrolyte (sodium meta silicate) present in the rubber mixture. Two kinds of stabilization occurred in the rubber part, namely steric stabilization and the stabilization against electrolyte. The effect of delayed - action coacervant (sodium meta silicate) on the initial setting time of rubber - cement mould showed that the molding process did not occur at sodium meta silicate concentration less than 2.66 parts per 100 parts of rubber latex (phr), and the optimum concentration used was 5% parts of rubber latex. It was observed that addition of a delaying agent (Sodium meta silicate) to the rubber part enhanced the delaying mechanism in the time needed for the molding process, while the addition of the delaying agent to the cement part did not have any effect on retardation of the molding process. Chemical coacervants function mainly by reducing the ζ potential which is associated with the electrical double layer surrounding the latex particle. This reduction may brought about in at least three distinct ways which take place in the system studied. 5 figs., 3 tabs

Preparation of composites of national rubber latex (NRL) - portland cement mould. Vol. 3

Energy Technology Data Exchange (ETDEWEB)

Dessouki, A M; Taher, N H; El-Nahas, H H [National Center for Radiation Research and Technology, Atomic Energy Athority, Cairo (Egypt)

1996-03-01

The aim of this study is to prepare some polymeric mould using national rubber latex (NRL) - portland cement composites based on a delayed- action mechanism. Factors affecting the preparation process such as concentration, mixing percentage, additives and their effect on what is regarded as a delayed action coacervant combination was studied. Composites of national latex (NRL) - portland cement would were prepared as two separate parts. The stabilized natural rubber latex (NRL) 100 parts with hydroxy ethyl cellulose (HEC) 2 parts as stabilizer and a delayed - action coacervant (sodium meta silicate as a delaying agent) 5 parts on one hand and the dry blend of cement 65 parts soluble in 65 parts of water as a paste on the other hand were mixed thoroughly on site. (HEC) was added to the rubber latex to prevent the coagulation of the rubber latex with the electrolyte (sodium meta silicate) present in the rubber mixture. Two kinds of stabilization occurred in the rubber part, namely steric stabilization and the stabilization against electrolyte. The effect of delayed - action coacervant (sodium meta silicate) on the initial setting time of rubber - cement mould showed that the molding process did not occur at sodium meta silicate concentration less than 2.66 parts per 100 parts of rubber latex (phr), and the optimum concentration used was 5% parts of rubber latex. It was observed that addition of a delaying agent (Sodium meta silicate) to the rubber part enhanced the delaying mechanism in the time needed for the molding process, while the addition of the delaying agent to the cement part did not have any effect on retardation of the molding process. Chemical coacervants function mainly by reducing the {zeta} potential which is associated with the electrical double layer surrounding the latex particle. This reduction may brought about in at least three distinct ways which take place in the system studied. 5 figs., 3 tabs.

Labbtex: Toolbox para generación de informes en LATEX para Matlab

Directory of Open Access Journals (Sweden)

José Luis Almazán Gárate

2012-10-01

Full Text Available En este artículo se presenta el software desarrollado por el Equipo H3lite dentro del Departamento de Ingeneniería Civil. Transportes de la Escuela de Ingenieros de Caminos, Canales y Puertos de la Universidad Politécnica de Madrid para la generación de informes enLATEX mediante el software Matlab® y la integración en sus rutinas, Labbtex.La librería Labbtex proporciona un marco flexible para mezclar texto y código Matlab® para la generación automática de documentos. Un rchivo fuente simple contiene el texto de documentación y el código Matlab, al correr la aplicación se genera un documento final LATEX que contiene el texto, gráficos y tablas indicados con el formato de un documento LATEX. El código Matlab genera un documento LATEX usando la sintaxis. Así, LATEX (para composición de texto de alta calidad y Matlab® (para cálculo matemático pueden usarse simultáneamente. Esto permite la generación de informes en tiempo real con un uso de recursos mínimo.

The influence of radiolytic sensitizers in natural rubber latex vulcanization induced by ionizing radiation

International Nuclear Information System (INIS)

Guedes, S.M.L.; Souza, A. de

1991-01-01

This work made on radiation vulcanization of natural rubber latex process by gamma rays from 60 Co source and electron beam of 1.5 MeV, 25 m A by Dynamitron, instead of classic process using sulfur. The experiment was carried out to study the influence of sensitizers (C Cl 4 and n-butyl acrylate) and was reported the vulcanization dose for each sensitizers, related to maximum tensile strength. The results show the possibility to introduce the volatile sensitizer (n-butyl acrylate) instead of C Cl 4 (toxic) in industry applications. (author)

Latex Allergy - A Case Report

Directory of Open Access Journals (Sweden)

Dr. Athma Prasanna

2005-10-01

Full Text Available The usage of rubber and its products are not uncommon in various walks of life. A continuous exposure or contact may sensitize the human body, causing reactions from mild to fatal. Despite the availability of the literature, medical personnel are still unaware of the implications of the use of latex materials.

Solid state NMR and LVSEM studies on the hardening of latex modified tile mortar systems

International Nuclear Information System (INIS)

Rottstegge, J.; Arnold, M.; Herschke, L.; Glasser, G.; Wilhelm, M.; Spiess, H.W.; Hergeth, W.D.

2005-01-01

Construction mortars contain a broad variety of both inorganic and organic additives beside the cement powder. Here we present a study of tile mortar systems based on portland cement, quartz, methyl cellulose and different latex additives. As known, the methyl cellulose stabilizes the freshly prepared cement paste, the latex additive enhances final hydrophobicity, flexibility and adhesion. Measurements were performed by solid state nuclear magnetic resonance (NMR) and low voltage scanning electron microscopy (LVSEM) to probe the influence of the latex additives on the hydration, hardening and the final tile mortar properties. While solid state NMR enables monitoring of the bulk composition, scanning electron microscopy affords visualization of particles and textures with respect to their shape and the distribution of the different phases. Within the alkaline cement paste, the poly(vinyl acetate) (VAc)-based latex dispersions stabilized by poly(vinyl alcohol) (PVA) were found to be relatively stable against hydrolysis. The influence of the combined organic additives methyl cellulose, poly(vinyl alcohol) and latexes stabilized by poly(vinyl alcohol) on the final silicate structure of the cement hydration products is small. But even small amounts of additives result in an increased ratio of ettringite to monosulfate within the final hydrated tile mortar as monitored by 27 Al NMR. The latex was found to be adsorbed to the inorganic surfaces, acting as glue to the inorganic components. For similar latex water interfaces built up by poly(vinyl alcohol), a variation in the latex polymer composition results in modified organic textures. In addition to the networks of the inorganic cement and of the latex, there is a weak network build up by thin polymer fibers, most probably originating from poly(vinyl alcohol). Besides the weak network, polymer fibers form well-ordered textures covering inorganic crystals such as portlandite

Latex medical gloves

DEFF Research Database (Denmark)

Palosuo, Timo; Antoniadou, Irini; Gottrup, Finn

2011-01-01

Many hospitals have implemented policies to restrict or ban the use of devices made of natural rubber latex (NRL) in healthcare as precautionary measures against the perceived risk of NRL allergy. Changes in glove technology, progress in measuring the specific allergenic potential of gloves...... properties of NRL and synthetic gloves and the role of glove powder. The review shows that NRL medical gloves, when compared with synthetic gloves, tend to be stronger, more flexible and better accepted by clinicians. The introduction of powder-free gloves has been associated with reductions in protein...

Formation of Defect-Free Latex Films on Porous Fiber Supports

KAUST Repository

Lively, Ryan P.

2011-09-28

We present here the creation of a defect-free polyvinylidene chloride barrier layer on the lumen-side of a hollow fiber sorbent. Hollow fiber sorbents have previously been shown to be promising materials for enabling low-cost CO 2 capture, provided a defect-free lumen-side barrier layer can be created. Film experiments examined the effect of drying rate, latex age, substrate porosity (porous vs nonporous), and substrate hydrophobicity/ hydrophilicity. Film studies show that in ideal conditions (i.e., slow drying, fresh latex, and smooth nonporous substrate), a defect-free film can be formed, whereas the other permutations of the variables investigated led to defective films. These results were extended to hollow fiber sorbents, and despite using fresh latex and relatively slow drying conditions, a defective lumen-side layer resulted. XRD and DSC indicate that polyvinylidene chloride latex develops crystallinity over time, thereby inhibiting proper film formation as confirmed by SEM and gas permeation. This and other key additional challenges associated with the porous hollow fiber substrate vs the nonporous flat substrate were overcome. By employing a toluene-vapor saturated drying gas (a swelling solvent for polyvinylidene chloride) a defect-free lumen-side barrier layer was created, as investigated by gas and water vapor permeation. © 2011 American Chemical Society.

Isotactic polypropylene/carbon nanotube composites prepared by latex technology: Electrical conductivity study

NARCIS (Netherlands)

Grossiord, N.; Wouters, M.E.L.; Miltner, H.E.; Lu, K.; Loos, J.; Van Mele, B.; Koning, C.E.

2010-01-01

Several series of nanocomposites were prepared using a latex-based process, the main step of which consisted of mixing an aqueous suspension of exfoliated carbon nanotubes (CNTs) and a polymer latex. In the present work, a systematic study on the electrical properties of fully amorphous (polystyrene

Proceedings of the international symposium on radiation vulcanization of natural rubber latex

International Nuclear Information System (INIS)

Machi, Sueo

1990-01-01

The First International Symposium on Radiation Vulcanization of Natural Rubber Latex (RVNRL) was held from 26 to 28 July 1989 at Tokyo and Takasaki. In these proceedings, thirty six papers presented at the Symposium are compiled. Main topics are commercial application of RVNRL, characterization of NR latex and vulcanization, properties of radiation vulcanized NR latex, development of sensitizers, mechanism of RVNRL, RVNRL with electron beams, and new Co-60 irradiator for RVNRL. Absence of nitrosamines and low cytotoxicity of radiation vulcanized NR latex are recognized as the remarkable advantages of RVNRL. The radiation vulcanization process for the production of protective rubber gloves for radioactive contamination was presented as the first commercial success in RVNRL. It was reported that various kinds of rubber articles for medical uses have being developed in West Germany. A sensitizer system consisting of n-butyl acrylate and t-butyl hydroperoxide was found to reduce the vulcanization dose to 8 kGy. (author)

CDNA library from the Latex of Hevea brasiliensis

Directory of Open Access Journals (Sweden)

Wilaiwan Chotigeat

2010-12-01

Full Text Available Latex from Hevea brasiliensis contains 30-50% (w/w of natural rubber (cis-1,4-polyisoprene, the important rawmaterial for many rubber industries. We have constructed a cDNA library from the latex of H. brasiliensis to investigate theexpressed genes and molecular events in the latex. We analyzed 412 expressed sequence tags (ESTs. More than 90% of theEST clones showed homology to previously described sequences in public databases. Functional classification of the ESTsshowed that the largest category were proteins of unknown function (30.1%, 11.4% of ESTs encoded for rubber synthesisrelatedproteins (RS and 8.5% for defense or stress related proteins (DS. Those with no significant homology to knownsequences (NSH accounted for 8.7%, primary metabolism (PM and gene expression and RNA metabolism were 7.8% and6.6%, respectively. Other categories included, protein synthesis-related proteins (6.6%, chromatin and DNA metabolism(CDM 3.9%, energy metabolism (EM 3.4%, cellular transport (CT 3.2%, cell structure (CS 3.2%, signal transduction (ST2.2%, secondary metabolism (SM 1.7%, protein fate (PF 2.2%, and reproductive proteins (RP 0.7%.

Pilot scale experiments on radiation vulcanization of NR latex

Science.gov (United States)

Ridwan, M.

The potential of irradiated latex as raw material of commercial use is under testing on pilot plant scale in Indonesia which has 225 kCi Co-60 irradiation facility and can irradiate 1000 tonnes of centrifuged latex per annum. The facility was jointly designed by BATAN of Indonesia and JAERI of Japan and was jointly financed by UNDP/IAEA, Government of Japan and Government of Indonesia under UNDP/IAEA Regional Cooperative Agreement Project on Industrial Application of Isotopes and Radiation Technology. The facility is a water pool type and can accomodate 400 kCi Co-60. The Co-60 rack has two shapes, plate and cylindrical shapes. The plate shape source is used for natural rubber latex irradiation and the cylindrical one is used for other irradiation services. The vulcanization system consists of three major components : emulsification unit ( height : 650 mm, diameter 500 mm ), mixing unit ( height : 1900mm, diameter 1200 mm ) and vulcanization reactor ( height : 1800 mm, diameter 1300 mm ). The first two components are located outside shielded room while the third one-in irradiation room. The radiation vulcanization process is a much simpler energy saving process comparedto the conventional thermal process which has two vulcanization steps before and after dipping. The physical and mechanical properties of irradiated NR Latex are comparable to those of sulfur vulcanized, and depend on many factors such as irradiation dose, sensitizer content, dry rubber content and storage time.

Latex imaging by environmental STEM: application to the study of the surfactant outcome in hybrid alkyd/acrylate systems.

Science.gov (United States)

Faucheu, Jenny; Chazeau, Laurent; Gauthier, Catherine; Cavaillé, Jean-Yves; Goikoetxea, Monika; Minari, Roque; Asua, José M

2009-09-01

Among other uses, latexes are a successful alternative to solvent-borne binders for coatings. Efforts are made to produce hybrid nanostructured latexes containing an acrylic phase and an alkyd phase. However, after the film-forming process, the surfactant used to stabilize these latexes remains in the film, and its location can have a drastic effect on the application properties. Among the processing parameters, the alkyd hydrophobicity can strongly influence this location. This article aims at the imaging of these surfactant molecules in two hybrid latexes with different hydrophobicity level of the alkyd resin. A first part of this paper is dedicated to the understanding of the contrast provided by the surfactant in environmental STEM imaging of latexes. Then, the influence of surfactant-polymer affinity on the surfactant location after film-forming of those hybrid alkyd/acrylate latexes is studied by this technique. It is shown that in the hybrid latex with an alkyd shell (obtained with the most hydrophilic resin), the surfactant molecules tend to remain buried in the alkyd phase. Conversely, in the hybrid latex with an acrylate shell (in the case of the most hydrophobic resin), the surfactant molecules tend to gather into islands like in pure acrylate latex films.

Latex-modified grouts for in-situ stabilization of buried transuranic/mixed waste

International Nuclear Information System (INIS)

Allan, M.L.

1996-06-01

The Department of Applied Science at Brookhaven national Laboratory was requested to investigate latex-modified grouts for in-situ stabilization of buried TRU/mixed waste for INEL. The waste exists in shallow trenches that were backfilled with soil. The objective was to formulate latex-modified grouts for use with the jet grouting technique to enable in-situ stabilization of buried waste. The stabilized waste was either to be left in place or retrieved for further processing. Grouting prior to retrieval reduces the potential release of contaminants. Rheological properties of latex-modified grouts were investigated and compared with those of conventional neat cement grouts used for jet grouting

Radiation vulcanization of natural rubber latex with low energy accelerator-II

Energy Technology Data Exchange (ETDEWEB)

Haque, Md. Emdadul; Makuuchi, Keizo; Ikeda, Kenichi; Yoshii, Fumio; Kume, Tamikazu [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Mitomo, Hiroshi [Gunma Univ., Faculty of Engineering, Dept. of Biological and Chemical Engineering, Kiryu, Gunma (Japan)

2002-03-01

The natural rubber latex (NRL) was radiation vulcanized under a low energy electron accelerator. Accelerating voltage and maximum beam current of this accelerator are 250 kV and 10 mA respectively. Irradiation was carried out in a reaction vessel with constant stirring. The capacity of the vessel is 18 liters. Radiation vulcanization accelerators (RVA) were normal butyl acrylate (n-BA) and nonane-diol-diacrylate (NDDA). NDDA has no bad smell like that of n-BA. 20 minutes irradiation time is enough to vulcanize 14 liters of latex when 5 phr RVA (both types) are used. Maximum of {approx}30 MPa tensile strength was obtained with 5 phr NDD-A. However the remained NDDA is difficult to remove due to high molecular weight. Water-extractable proteins content was determined in dipped films for various leaching conditions without and with additive (polyvinyl alcohol, PVA). Water extractable proteins content is reduced to {<=} 41 by adding 5 phr PVA and leaching for 8 hours. The tackiness of the dipped films is reduced to 0.1 from 9 gf by mixing 6 phr PVA with the irradiated latex. Hand gloves (surgical and examination) were successfully produced from the irradiated latex. (author)

Biodegradability and aging study of rubber films obtained by gamma radiation vulcanization processes of latex

International Nuclear Information System (INIS)

Martins, Carlos Felipe Pinto

2005-01-01

The natural rubber latex (NRL) is industrially crosslinked by the conventional process of vulcanization, which uses sulphur and heat. Otherwise, the network can also be done by the alternative process with ionizing radiation. In this work the crosslinking of NRL was studied by the comparison of the conventional vulcanization system and the ionizing radiation process of 60 C source. The products obtained, the irradiated latex, the irradiated latex with approximately 1% of soy lecithin and the sulphur vulcanized latex were tested by accelerated aging with ultraviolet (UV) and outdoor aging with compostage, tensile strength at break, swelling and gel fraction, fungi micro biota, scanning electron microscopy (SEM), infrared spectroscopy (FTIR) and thermogravimetry and differential scanning calorimetry analysis (TG and DSC). The results showed that the aging with microorganisms have a great influence in the physical properties of the samples. The thermal stability order observed showed that the sulphur vulcanized latex is more resistant, what is probably associated to a network more stable under the aging conditions. On the other hand, the irradiated latex showed intense biodegradation aspects, particularly with the presence of the soy lecithin. (author)

Thermodynamics of swelling of latex particles with two monomers: a sensitivity analysis

NARCIS (Netherlands)

Maxwell, I.A.; Noel, E.F.J.; Schoonbrood, H.A.S.; German, A.L.

1993-01-01

A sensitivity anal. is performed to det. at what conditions the simplified model for swelling of latex particles by two monomers or two solvents is valid. This model proposes that, inter alia, the fractions of two monomers in the latex particles and in the monomer droplets are equal. The model is a

Color Spectrum Properties of Pure and Non-Pure LATEX in Discriminating Rubber Clone Series

International Nuclear Information System (INIS)

Noor Aishah Khairuzzaman; Hadzli Hashim; Nina Korlina Madzhi; Noor Ezan Abdullah; Faridatul Aima Ismail; Ahmad Faiz Sampian; Azhana Fatnin Che Will

2015-01-01

A study of color spectrum properties for pure and non-pure latex in discriminating rubber clone series has been presented in this paper. There were five types of clones from the same series being used as samples in this study named RRIM2002, RRIM2007, RRIM2008, RRIM2014, and RRIM3001. The main objective is to identify the significant color spectrum (RGB) from pure and non-pure latex that can discriminate rubber clone series. The significant information of color spectrum properties for pure and non-pure latex is determined by using spectrometer and Statistical Package for the Social Science (SPSS). Visible light spectrum (VIS) is used as a radiation light of the spectrometer to emit light to the surface of the latex sample. By using SPSS software, the further numerical analysis of color spectrum properties is being conducted. As the conclusion, blue color spectrum for non-pure is able to discriminate for all rubber clone series whereas only certain color spectrum can differentiate several clone series for pure latex. (author)

Transient Three-Dimensional Side Load Analysis of Out-of-Round Film Cooled Nozzles

Science.gov (United States)

Wang, Ten-See; Lin, Jeff; Ruf, Joe; Guidos, Mike

2010-01-01

The objective of this study is to investigate the effect of nozzle out-of-roundness on the transient startup side loads at a high altitude, with an anchored computational methodology. The out-of-roundness could be the result of asymmetric loads induced by hardware attached to the nozzle, asymmetric internal stresses induced by previous tests, and deformation, such as creep, from previous tests. The rocket engine studied encompasses a regeneratively cooled thrust chamber and a film cooled nozzle extension with film coolant distributed from a turbine exhaust manifold. The computational methodology is based on an unstructured-grid, pressure-based computational fluid dynamics formulation, and a transient inlet history based on an engine system simulation. Transient startup computations were performed with the out-of-roundness achieved by four different degrees of ovalization: one perfectly round, one slightly out-of-round, one more out-of-round, and one significantly out-of-round. The results show that the separation-line-jump is the peak side load physics for the round, slightly our-of-round, and more out-of-round cases, and the peak side load increases as the degree of out-of-roundness increases. For the significantly out-of-round nozzle, however, the peak side load reduces to comparable to that of the round nozzle and the separation line jump is not the peak side load physics. The counter-intuitive result of the significantly out-of-round case is found to be related to a side force reduction mechanism that splits the effect of the separation-line-jump into two parts, not only in the circumferential direction and most importantly in time.

Biological Monitoring Prospects in Occupational and Environmental Medicine

CERN Document Server

Angerer, Jürgen

2003-01-01

At the invitation of the Deutsche Forschungsgemeinschaft (DFG), a round-table discussion was held on 9 and 10 March 2000, dealing with future possibilities for biomonitoring in occupational and environmental medicine. Biomonitoring has reached a high standard in Germany over the past 30 years, not least due to the fact that the results of the Senate commission on materials hazardous to health at the workplace have been directly implemented as part of the jurisdiction relating to occupational safety. This book combines the expertise gathered from various areas within toxicology, occupational me

Extractable proteins from electron beam (EB) irradiated natural rubber (NR) latex

International Nuclear Information System (INIS)

Feroza Akhtar; Fumio Yoshii; Keizo Makuuchi

1996-01-01

The protein assay of natural rubber latex (NRL) vulcanized by low energy electron beam (EB, 300 keV, 30 mA) has been carried out using Bicinchoninic acid (BCA) reagent. Extractable protein in irradiated latex film was determined by measuring the absorption of colored solution at 562 nm using UV spectrometer. The effect of various radiation doses on the extractable protein content of NRL was investigated. It was ,found that the quantities of extractable protein increases with radiation dose. When compared with ,gamma-ray irradiated samples the same trend was observed. Electron beam irradiated latex films are leached in 1% (ammonia water for various lengths of time. From the results it was established that within 2 hours of leaching in ammonia water most of the extractable protein (96%) were removed from rubber film

Antioxidant and sensitizer effect on the stability of natural rubber latex vulcanized by gamma rays

International Nuclear Information System (INIS)

Canavel, V.

1993-01-01

The natural rubber latex was vulcanized by gamma rays and electrons beam, in the presence and absence of sensitizer at room temperature. The sensitizers were the following; n-butyl acrylate (n-BA) / t-butyl hydroperoxide (t-B H) / KOH, C Cl 4 / potassium laurate and n-BA / KOH. The studied antioxidants, Irganox 1520, Vulcanox SP and Vulcanox BKF, were added to the latex after irradiation. Among the studied antioxidants in function of tensile strength (TS) after the aging of rubber plates, the Irganox was the best efficient on the gamma vulcanization in the presence of n-BA/t-B H/KOH, because only 0,20 p hr is enough to obtain the greatest increase of TS, that was 34%, 12 MPa to 16 MPa. The formulating method of latex with the sensitizer constituted the 3,0 p hr of n-BA/ 0,1 p hr of t-B H and 0,2 p hr of KOH, was evaluated respecting the TS of rubber plates. The electrons beam vulcanization produces the greatest reversible perturbance in the colloidal stability of latex after irradiation caused by radiolytic species absorption that promotes the increase of particle size. The antioxidant also contributes to reversible destabilization of gamma irradiated latex, because it is also adsorbed by particles surface. The relation between the latex viscosity and the TS of respective rubber plates is reverse, showing the latex stability affects the quality of rubber goods. (author)

The entry of free radicals into polystyrene latex particles

International Nuclear Information System (INIS)

Adams, M.E.; Trau, M.; Gilbert, R.C.; Napper, D.R.

1988-01-01

Mechanistic understanding of the processes governing the kinetics of emulsion polymerization has both scientific and technical interest. One component of this process that is poorly understood at present is that of free radical entry into latex particles. Measurements were made of the entry rate coefficient as a function of temperature for free radicals entering polystyrene latex particles in seeded emulsion polymerizations initiated by γ-rays. The activation energy for entry was found to be less than 24 ± 3 kJ mol -1 , consistent with entry being controlled by a physical (e.g. diffusional) rather than a chemical process. Measurement of the entry rate coefficient as a function of the γ-ray dose rate suggested that the factors that determine the entry rate when the primary free radicals are uncharged are similar to those that determine the entry rate for charged free radicals derived from chemical initiation by peroxydisulfate. This result was consistent with measurements of the entry rate coefficient of charged free radicals derived from peroxydisulfate; these data were found to be virtually independent of both the extent of the latex surface coverage by the anionic surfactant sodium dodecyl sulfate and the ionic strength of the continuous phase. The data refute several proposals given in the literature for the rate-determining step for entry, being inconsistent with control by collision of free radicals with the latex particles, surfactant desorption, and an electrostatic barrier arising from the colloidal nature of the entering free radical. The origin of the activation energy for entry remains obscure

Osmotic de-swelling and swelling of latex dispersions

International Nuclear Information System (INIS)

Bonnet-Gonnet, Cecile

1993-01-01

This research thesis reports the comparison of, on the one hand, direct measurements of de-swelling resistance of latex dispersions obtained by osmotic pressure with, on the other hand, predictions made by models of electrostatic interactions. This resistance is explained in the case of sulphate-stabilised polystyrene particles (direct repulsion between charged particles), and in the case of copolymer (ps-pba) particles covered by an amphiphilic polymer (interactions between surface macromolecules and polymers). The study of de-swelling and swelling cycles highlights the existence of thresholds beyond which the concentrated dispersion has some cohesion. This irreversibility can be modelled by a Van der Waals attraction. The role of hydrophobic forces in latex destabilisation is studied [fr

Hierarchically structured self-supported latex films for flexible and semi-transparent electronics

International Nuclear Information System (INIS)

Määttänen, Anni; Ihalainen, Petri; Törngren, Björn; Rosqvist, Emil; Pesonen, Markus; Peltonen, Jouko

2016-01-01

Graphical abstract: - Highlights: • Transparent self-supported latex films were fabricated by a peel-off process. • Various template substrates were used for creating e.g. hierarchically structured latex films. • Ultra-thin and semi-transparent conductive gold electrodes were evaporated on the latex films.Electrochemical experiments were carried out to verify the applicability of the electrodes. - Abstract: Different length scale alterations in topography, surface texture, and symmetry are known to evoke diverse cell behavior, including adhesion, orientation, motility, cytoskeletal condensation, and modulation of intracellular signaling pathways. In this work, self-supported latex films with well-defined isotropic/anisotropic surface features and hierarchical morphologies were fabricated by a peel-off process from different template surfaces. In addition, the latex films were used as substrates for evaporated ultrathin gold films with nominal thicknesses of 10 and 20 nm. Optical properties and topography of the samples were characterized using UV–vis spectroscopy and Atomic Force Microscopy (AFM) measurements, respectively. The latex films showed high-level transmittance of visible light, enabling the fabrication of semi-transparent gold electrodes. Electrochemical impedance spectroscopy (EIS) measurements were carried out for a number of days to investigate the long-term stability of the electrodes. The effect of 1-octadecanethiol (ODT) and HS(CH_2)_1_1OH (MuOH) thiolation and protein (human serum albumin, HSA) adsorption on the impedance and capacitance was studied. In addition, cyclic voltammetry (CV) measurements were carried out to determine active medicinal components, i.e., caffeic acid with interesting biological activities and poorly water-soluble anti-inflammatory drug, piroxicam. The results show that the fabrication procedure presented in this study enables the formation of platforms with hierarchical morphologies for multimodal (optical and

Hierarchically structured self-supported latex films for flexible and semi-transparent electronics

Energy Technology Data Exchange (ETDEWEB)

Määttänen, Anni, E-mail: anni.maattanen@abo.fi [Laboratory of Physical Chemistry, Faculty of Science and Engineering, Center for Functional Materials, Åbo Akademi University, Porthaninkatu 3, 20500, Turku (Finland); Ihalainen, Petri, E-mail: petri.ihalainen@abo.fi [Laboratory of Physical Chemistry, Faculty of Science and Engineering, Center for Functional Materials, Åbo Akademi University, Porthaninkatu 3, 20500, Turku (Finland); Törngren, Björn, E-mail: bjorn.torngren@abo.fi [Laboratory of Physical Chemistry, Faculty of Science and Engineering, Center for Functional Materials, Åbo Akademi University, Porthaninkatu 3, 20500, Turku (Finland); Rosqvist, Emil, E-mail: emil.rosqvist@abo.fi [Laboratory of Physical Chemistry, Faculty of Science and Engineering, Center for Functional Materials, Åbo Akademi University, Porthaninkatu 3, 20500, Turku (Finland); Pesonen, Markus, E-mail: markus.pesonen@abo.fi [Physics, Faculty of Science and Engineering, Center for Functional Materials, Åbo Akademi University, Porthaninkatu 3, 20500, Turku (Finland); Peltonen, Jouko, E-mail: jouko.peltonen@abo.fi [Laboratory of Physical Chemistry, Faculty of Science and Engineering, Center for Functional Materials, Åbo Akademi University, Porthaninkatu 3, 20500, Turku (Finland)

2016-02-28

Graphical abstract: - Highlights: • Transparent self-supported latex films were fabricated by a peel-off process. • Various template substrates were used for creating e.g. hierarchically structured latex films. • Ultra-thin and semi-transparent conductive gold electrodes were evaporated on the latex films.Electrochemical experiments were carried out to verify the applicability of the electrodes. - Abstract: Different length scale alterations in topography, surface texture, and symmetry are known to evoke diverse cell behavior, including adhesion, orientation, motility, cytoskeletal condensation, and modulation of intracellular signaling pathways. In this work, self-supported latex films with well-defined isotropic/anisotropic surface features and hierarchical morphologies were fabricated by a peel-off process from different template surfaces. In addition, the latex films were used as substrates for evaporated ultrathin gold films with nominal thicknesses of 10 and 20 nm. Optical properties and topography of the samples were characterized using UV–vis spectroscopy and Atomic Force Microscopy (AFM) measurements, respectively. The latex films showed high-level transmittance of visible light, enabling the fabrication of semi-transparent gold electrodes. Electrochemical impedance spectroscopy (EIS) measurements were carried out for a number of days to investigate the long-term stability of the electrodes. The effect of 1-octadecanethiol (ODT) and HS(CH{sub 2}){sub 11}OH (MuOH) thiolation and protein (human serum albumin, HSA) adsorption on the impedance and capacitance was studied. In addition, cyclic voltammetry (CV) measurements were carried out to determine active medicinal components, i.e., caffeic acid with interesting biological activities and poorly water-soluble anti-inflammatory drug, piroxicam. The results show that the fabrication procedure presented in this study enables the formation of platforms with hierarchical morphologies for multimodal

The effect of emulsifier on the stability of irradiated LA-TZ latex

International Nuclear Information System (INIS)

Made Sumarti K; Utama, Marga; Puspitasari, Tita

1998-01-01

The effect of six kinds of stabilizer on the stability of the concentrated LA-TZ latex which contains n-BA have been studied. The six stabilizers are: 1. Naphthalene sulfonic acid formaldehyde condensate, 2. Sodium dialkyl sulfosuccinate, 3. Triethanol amine lauryl sulfate, 4. Sodium polyoxyethylene alkyl phenol ether sulfate, 5. Dodecyl benzene sulfonic acid (Neopelex FS), and 6. Ammonium laurat. The concentrations of the stabilizers are in the range of 0,1 to 0,3% and of the n-BA is 5phr (per hundred rubber). The field natural rubber latex was stabilized by Tetramethyl tiuram disulfide - Zine oxide (TMTD-ZnO) and ammonium gas, and was concentrated by centrifuge. The obtain concentrated LA-TZ latex was added by the n-BA and was kept with various storage time i.e. o, 2, 4, 6, 18, and 24 hours. It was found that the stable latex was irradiated by 15 kGy dose and the physical properties was tested, then the maximum tensile strength of 223,3 kg/cm 2 was found on Neopelex FS concentrate at 0,1%. (authors)

Elements of the LaTeX system for the development of large publications

DEFF Research Database (Denmark)

Andersen, Esben Sloth

This document presents gives a quick overview over the LATEX system from the viewpoint of the production of books and complex papers. Thereby it provides the starting point for the author's selection of a set of LATEX packages and the development of related commands....

Evaluation of apparent viscosity of Para rubber latex by diffuse reflection near-infrared spectroscopy.

Science.gov (United States)

Sirisomboon, Panmanas; Chowbankrang, Rawiphan; Williams, Phil

2012-05-01

Near-infrared spectroscopy in diffuse reflection mode was used to evaluate the apparent viscosity of Para rubber field latex and concentrated latex over the wavelength range of 1100 to 2500 nm, using partial least square regression (PLSR). The model with ten principal components (PCs) developed using the raw spectra accurately predicted the apparent viscosity with correlation coefficient (r), standard error of prediction (SEP), and bias of 0.974, 8.6 cP, and -0.4 cP, respectively. The ratio of the SEP to the standard deviation (RPD) and the ratio of the SEP to the range (RER) for the prediction were 4.4 and 16.7, respectively. Therefore, the model can be used for measurement of the apparent viscosity of field latex and concentrated latex in quality assurance and process control in the factory.

Glove powder's carrying capacity for latex protein: analysis using the ASTM ELISA test.

Science.gov (United States)

Beezhold, D; Horton, K; Hickey, V; Daddona, J; Kostyal, D

2003-01-01

Glove donning powders carry latex proteins and disperse them into the workplace environment. We have used the ASTM D6499 ELISA to quantify the amount of latex antigen bound to and carried by glove powders. We could differentiate between a small amount of protein actually bound to the powders and a larger amount carried by the powder. Enhanced binding of a major allergen, Hev b 5, to the starch powders was demonstrated by Western blot. The D6499 ELISA is able to measure total latex antigen, soluble and powder bound, simultaneously without the need to centrifuge the samples.

Analysis of Aqueous Extractable Protein in Radiation Pre vulcanized Natural Rubber Latex (RVNRL) And Sulphur Pre vulcanized Natural Rubber Latex (SVNRL)

International Nuclear Information System (INIS)

Sofian Ibrahim; Mohd Noor Wadi Mat Lazim; Syuhada Ramli; Keong, C.C.; Khairul Hisyam Mohd Yusof; Muhammad Saiful Omar; Najib Mohd Zakey; Hafizuddin Maseri; Noor Hasni Mohd Ali

2015-01-01

The use of radiation do not only produces Radiation Pre vulcanized Natural Rubber Latex (RVNRL) that can be used for the production of nitrosamines free products, moreover, RVNRL also able to exclude type IV allergy that caused by high protein content in the products. Leaching water from production of finger coat from RVNRL and Sulphur Pre vulcanized Natural rubber Latex (SVNRL) has been collected. Extractable protein content from water samples measured according to the test protocol ASTM D5712-2010. Water from leaching process of finger coat made from RVNRL showed a higher protein content than SVNRL. This explains why RVNRL based products contain very low protein content and thus reduce the risk of Type IV allergy. (author)

Latex-mediated synthesis of ZnS nanoparticles: green synthesis approach

Energy Technology Data Exchange (ETDEWEB)

Hudlikar, Manish; Joglekar, Shreeram [University of Pune, Division of Biochemistry, Department of Chemistry (India); Dhaygude, Mayur [National Chemical Laboratory, Polymer Science and Engineering Division (India); Kodam, Kisan, E-mail: kodam@chem.unipune.ac.in [University of Pune, Division of Biochemistry, Department of Chemistry (India)

2012-05-15

A low-cost, green synthesis of ZnS nanoparticles is reported using 0.3 % latex solution prepared from Jatropha curcas L. ZnS nanoparticles were characterized by X-ray diffraction, selected area electron diffraction, transmission electron microscopy, energy dispersive analysis of X-rays, UV-vis optical absorption and photoluminescence techniques. Fourier Transform Infrared Spectroscopy was performed to find the role of cyclic peptides namely curcacycline A (an octapeptide), curcacycline B (a nonapeptide) and curcain (an enzyme) as a possible reducing and stabilizing agents present in the latex of J. curcas L. The average size of ZnS nanoparticles was found to be 10 nm. Latex of J. curcas L. itself acts as a source of sulphide (S{sup -2}) ions that are donated to Zn ions under present experimental conditions. Source of sulphide (S{sup -2}) ions is still unclear, but we speculate that cysteine or thiol residues present in enzyme curcain may be donating these sulphide (S{sup -2}) ions.

Latex-mediated synthesis of ZnS nanoparticles: green synthesis approach

Science.gov (United States)

Hudlikar, Manish; Joglekar, Shreeram; Dhaygude, Mayur; Kodam, Kisan

2012-05-01

A low-cost, green synthesis of ZnS nanoparticles is reported using 0.3 % latex solution prepared from Jatropha curcas L. ZnS nanoparticles were characterized by X-ray diffraction, selected area electron diffraction, transmission electron microscopy, energy dispersive analysis of X-rays, UV-vis optical absorption and photoluminescence techniques. Fourier Transform Infrared Spectroscopy was performed to find the role of cyclic peptides namely curcacycline A (an octapeptide), curcacycline B (a nonapeptide) and curcain (an enzyme) as a possible reducing and stabilizing agents present in the latex of J. curcas L. The average size of ZnS nanoparticles was found to be 10 nm. Latex of J. curcas L. itself acts as a source of sulphide (S-2) ions that are donated to Zn ions under present experimental conditions. Source of sulphide (S-2) ions is still unclear, but we speculate that cysteine or thiol residues present in enzyme curcain may be donating these sulphide (S-2) ions.

Latex-mediated synthesis of ZnS nanoparticles: green synthesis approach

International Nuclear Information System (INIS)

Hudlikar, Manish; Joglekar, Shreeram; Dhaygude, Mayur; Kodam, Kisan

2012-01-01

A low-cost, green synthesis of ZnS nanoparticles is reported using 0.3 % latex solution prepared from Jatropha curcas L. ZnS nanoparticles were characterized by X-ray diffraction, selected area electron diffraction, transmission electron microscopy, energy dispersive analysis of X-rays, UV–vis optical absorption and photoluminescence techniques. Fourier Transform Infrared Spectroscopy was performed to find the role of cyclic peptides namely curcacycline A (an octapeptide), curcacycline B (a nonapeptide) and curcain (an enzyme) as a possible reducing and stabilizing agents present in the latex of J. curcas L. The average size of ZnS nanoparticles was found to be 10 nm. Latex of J. curcas L. itself acts as a source of sulphide (S −2 ) ions that are donated to Zn ions under present experimental conditions. Source of sulphide (S −2 ) ions is still unclear, but we speculate that cysteine or thiol residues present in enzyme curcain may be donating these sulphide (S −2 ) ions.

Incidence of latex harvesting technologies on agronomic and ...

African Journals Online (AJOL)

Incidence of latex harvesting technologies on agronomic and physiological parameters and profitability of some rapid metabolic class clones of rubber tree ( Hevea brasiliensis ) in southwestern Côte d'Ivoire.

Soybean oil in water-borne coatings and latex film formation study by AC impedance

Science.gov (United States)

Jiratumnukul, Nantana

Conventional coalescing agents such as butyl cellosolve, butyl carbitol, and TexanolRTM are widely use in the latex coatings industry to facilitate film formation at ambient temperature. Coalescent aids are composed of solvents with low evaporation rates. After water evaporates, coalescent aids would help soften polymer molecules and form continuous films, then gradually evaporates from the film. Coalescent aids, therefore, are considered as volatile organic compounds (VOC), which are of environmental concern. The main purpose of this research project was to prepare a fatty acid glycol ester from soybean oil and glycol (polyols). The soybean oil glycol ester can be used as a coalescent aid in latex paint formulation. The soybean oil glycol ester not only lowered the minimum film formation temperature of latex polymers and continuous film formed at ambient temperature, but also after it has facilitated film formation, does not substantially evaporate, but becomes part of the film. Soybean oil glycol esters, therefore, can reduce the VOC levels and facilitate film formation of latex paints. In the second part of this research AC-Impedance was used to investigate the efficiency of soybean oil coalescent aid in latex film formation relative to the conventional ones. The coating resistance showed that the efficiency of film formation was increased as a function of dry time. The coating resistance also exhibited the effect of soybean oil ester in latex film formation in the same fashion as a conventional coalescent aid, TexanolRTM.

[Changes in the peripheral blood of workers engaged in ethylbenzene-styrene and synthetic rubber and latex manufacture].

Science.gov (United States)

Khristeva, V

1986-01-01

A total of 67 workers were examined from the production of "Ethyl benzene-styrene" and 184 workers from the production of "Synthetic rubber and latex", as well as a control group of 59 employees. The workers from the first production are exposed to the effect of styrene, ethyl benzene and toluene. The concentrations of the substances surpass MAC, with several times, at the majority of the working places. The workers with a length of service over 10 years predominate. The workers from the second production are exposed to the combined effect of styrene and divinyl, their concentrations fluctuating from 2 to 8 times over MAC. The workers with a length of service over 10 years are 71.7%. The deviations, established in the hematological indices studied are compared with the results from a study on the workers from those productions of 6 years ago. Dynamics in the changes was established among the workers from the production of "Synthetic rubber and latex", associated with the duration of occupational exposure to styrene and divinyl. In case of a shorter length of service, the deviations are functional (reduction of peroxidase activity in granulocytes), increase of hemoglobin and hematocrit, associated with the adaptive reaction of organism. Pronounced anemic syndrome was established in a considerable number (24 workers) after an exposure of 10 years as well as lymphocytosis (35 subjects) and leukopenia (9 subjects).

Test trial radiation vulcanization of natural rubber latex in Jakarta Indonesia

International Nuclear Information System (INIS)

Devendra, R.; Kulatunge, S.S.; Chandralal, H.N.K.K.; Kalyani, N.M.V.; Seneviratne, J.; Wellage, S.

1994-01-01

Radiation vulcanization of natural rubber latex (RVNRL) can be used to make large quantities of specially stabilized latex. It is possible to obtain RVNRL films of tensile strength over 25 MPa. The films could be either coagulant dipped or cast. It is very important to determine the correct radiation dose which gives the maximum tensile strength. Cross linking density or prevulcanized relax modulus (PRM) at 100% is a reliable property to control the prevulcanization

A Drug Combination Screen Identifies Drugs Active against Amoxicillin-induced Round Bodies of Borrelia burgdorferi Persisters from an FDA Drug Library

Directory of Open Access Journals (Sweden)

Jie eFeng

2016-05-01

Full Text Available Although currently recommended antibiotics for Lyme disease such as doxycycline or amoxicillin cure the majority of the patients, about 10-20% of patients treated for Lyme disease may experience lingering symptoms including fatigue, pain, or joint and muscle aches. Under stress conditions such as starvation or antibiotic exposure, Borrelia burgdorferi can develop round body forms, which are a type of persister bacteria that are not killed by current Lyme antibiotics. To identify more effective drugs that are active against the round bodies of B. burgdorferi, we established a round body persister model induced by amoxicillin and screened the Food and Drug Administration (FDA drug library consisting of 1581 drug compounds and also 22 drug combinations using the SYBR Green I/propidium iodide (PI viability assay. We identified 23 drug candidates that have higher activity against the round bodies of B. burgdorferi than either amoxicillin or doxycycline. Eleven of these scored better than metronidazole and tinidazole which have been previously described to be active against round bodies. While some drug candidates such as daptomycin and clofazimine overlapped with a previous screen against stationary phase B. burgdorferi persisters, additional drug candidates active against round bodies we identified include artemisinin, ciprofloxacin, nifuroxime, fosfomycin, chlortetracycline, sulfacetamide, sulfamethoxypyridazine and sulfathiozole. Two triple drug combinations had the highest activity against round bodies and stationary phase B. burgdorferi persisters: artemisinin/cefoperazone/doxycycline and sulfachlorpyridazine/daptomycin/doxycycline. These findings confirm and extend previous findings that certain drug combinations have superior activity against B. burgdorferi persisters in vitro, even if pre-treated with amoxicillin. These findings may have implications for improved treatment of Lyme disease.

Binding kinetics of magnetic nanoparticles on latex beads and yeast cells studied by magnetorelaxometry

International Nuclear Information System (INIS)

Eberbeck, Dietmar; Bergemann, Christian; Hartwig, Stefan; Steinhoff, Uwe; Trahms, Lutz

2005-01-01

The ion exchange mediated binding of magnetic nanoparticles (MNP) to modified latex spheres and yeast cells was quantified using magnetorelaxometry. By fitting subsequently recorded relaxation curves, the kinetics of the binding reactions was extracted. The signal of MNP with weak ion exchanger groups bound to latex and yeast cells scales linearly with the concentration of latex beads or yeast cells whereas that of MNP with strong ion exchanger groups is proportional to the square root of concentration. The binding of the latter leads to a much stronger aggregation of yeast cells than the former MNP

Use of micrometric latex beads to improve the porosity of hydroxyapatite obtained by chemical coprecipitation method

Science.gov (United States)

Webler, G. D.; Rodrigues, W. C.; Silva, A. E. S.; Silva, A. O. S.; Fonseca, E. J. S.; Degenhardt, M. F. S.; Oliveira, C. L. P.; Otubo, L.; Barros Filho, D. A.

2018-04-01

Hydroxyapatite is one of the most important biomaterials whose application mainly extends to implants and drug delivery. This work will discuss the changes in the pore size distribution of hydroxyapatite when there are latex beads present during the synthesis. These changes were monitored using different techniques: small angle X-ray scattering, X-ray diffraction, thermal gravimetrical analysis, N2 adsorption, scanning and transmission electron microscopy. Latex beads and hydroxyapatite form a single nanocomposite with well-distinguished inorganic and organic phases. Latex bead removal in the temperature range of 300-600 °C did not modify the original crystalline structure of hydroxyapatite. However, the latex beads favored an increase in the adsorption capacity of mesopores at temperatures higher than their glassy transition (Tg). The main result of this research work consists on the increase of surface area and pore size distribution obtained after the removal of latex beads template. Latex beads have been used in a different approach changing the porosity of hydroxyapatite scaffolds not only introducing new routes for cell integration but also broadening the pore size distribution which can result in a more high efficiency for drug release in living cells.

Biodegradability and aging study of rubber films obtained by gamma radiation vulcanization processes of latex; Estudo da biodegradabilidade e envelhecimento de filmes de borracha obtidos por processos de vulcanizacao do latex por radiacao induzida de fonte gama

Energy Technology Data Exchange (ETDEWEB)

Martins, Carlos Felipe Pinto

2005-07-01

The natural rubber latex (NRL) is industrially crosslinked by the conventional process of vulcanization, which uses sulphur and heat. Otherwise, the network can also be done by the alternative process with ionizing radiation. In this work the crosslinking of NRL was studied by the comparison of the conventional vulcanization system and the ionizing radiation process of {sup 60}C source. The products obtained, the irradiated latex, the irradiated latex with approximately 1% of soy lecithin and the sulphur vulcanized latex were tested by accelerated aging with ultraviolet (UV) and outdoor aging with compostage, tensile strength at break, swelling and gel fraction, fungi micro biota, scanning electron microscopy (SEM), infrared spectroscopy (FTIR) and thermogravimetry and differential scanning calorimetry analysis (TG and DSC). The results showed that the aging with microorganisms have a great influence in the physical properties of the samples. The thermal stability order observed showed that the sulphur vulcanized latex is more resistant, what is probably associated to a network more stable under the aging conditions. On the other hand, the irradiated latex showed intense biodegradation aspects, particularly with the presence of the soy lecithin. (author)

Rubber/clay nanocomposites by combined latex compounding and melt mixing: A masterbatch process

International Nuclear Information System (INIS)

Tan, Jinghua; Wang, Xiaoping; Luo, Yuanfang; Jia, Demin

2012-01-01

Highlights: → Rubber/Ca-montmorillonite nanocomposites were prepared by the masterbatch process. → Latex compounding method is efficient to improve the Ca-montmorillonite dispersion. → Exfoliated structure was obtained in the masterbatch by latex compounding method. → Intercalated and exfoliated structures were achieved in the vulcanizate. → The properties of vulcanizate are improved by the addition of Ca-montmorillonite. -- Abstract: Rubber/Ca-montmorillonite (Ca-MMT) nanocomposites with well exfoliated Ca-MMT layers were prepared by combination of latex compounding and melt mixing. Firstly, a high Ca-MMT content masterbatch was co-coagulated by natural rubber (NR) latex and modified Ca-MMT aqueous suspension through latex compounding. The masterbatch was added in the system of styrene butadiene rubber (SBR) and epoxidized natural rubber (ENR) by melt mixing subsequently. The X-ray diffraction (XRD) and transmission electronic microscopy (TEM) results showed that intercalated and exfoliated nanocomposites were obtained by the masterbatch technique. The effects of modified Ca-MMT introduction into the rubber matrix, via the masterbatch technique, on the properties of the resulting composites were studied. It was found that the vulcanization was hindered by the incorporation of modified Ca-MMT, while mechanical performances, thermal stability and aging resistance were improved. The increasingly glass transition temperature and the storage modulus with the loading of modified Ca-MMT were measured by dynamic mechanical analysis (DMA).

Diagnosis of toxoplasmosis in pregnancy. Evaluation of latex-protein complexes by immnunoagglutination.

Science.gov (United States)

Peretti, Leandro E; Gonzalez, Verónica D G; Marcipar, Iván S; Gugliotta, Luis M

2017-07-01

The aim of this work was to obtain a reagent based on latex particles for ruling out acute toxoplasmosis in pregnant women by immunoagglutination (IA). Latex-protein complexes (LPC) were previously synthesized coupling the recombinant protein of Toxoplasma gondii P22Ag and the homogenate of the parasite to latex particles with different size, chemical functionality and charge density. LPC were tested in IA assays against a panel of 72 pregnant women serum samples. Results were analysed through receiver operating characteristic curves, determining area under the curve (AUC), sensitivity, specificity positive and negative predictive values (PPV and NPV, respectively). It was observed that the antigenicity of proteins was not affected during sensitization by either physical adsorption or covalent coupling. The best results in the sense of maximizing discrimination of low avidity sera from chronic ones were observed for the IA test based on latex particles with carboxyl functionality and the recombinant P22Ag, obtaining an AUC of 0·94, a sensitivity of 100% and a NPV of 100%. In this way, the proposed test could be useful for the toxoplasmosis diagnosis in pregnant women, with the advantages of being cheap, rapid and easy to be implemented.

Cytotoxicity of latex and pharmacobotanical study of leaves and stem of Euphorbia umbellata (Janaúba

Directory of Open Access Journals (Sweden)

Lívia E.C. Luz

Full Text Available AbstractIn southern Brazil, the bottled latex of Synadenium grantii Hook f., Euphorbiaceae, is popularly used as a treatment of all types of cancer. Similarly, Synadenium umbellatum Pax. is used in the central western region of Brazil for the same purpose and in the same manner of use. Both plants are popularly known as janaúba or leitosinha. The objectives of this study were to use pharmacobotanical analysis to verify whether these two species, which are considered to be distinct, are actually the same to determine anatomical markers; to assist in the identification and differentiation of other Euphorbia; and to evaluate the cytotoxic activity of the latex in relation to HeLa and HRT-18 cells. Leaves and stems of the species were collected in Goiânia and Ponta Grossa and were investigated using scanning electron microscopy and optical microscopy techniques. The latex was also collected and analyzed in relation to its cytotoxic effect by employing MTT and NR techniques. The pharmacobotanical study of the specimens in both localities showed that they were the same species, namely Euphorbia umbellata (Pax Bruyns, which is the scientific nomenclature accepted and confirmed by an expert taxonomist who specializes in Euphorbia. The pharmacobotanical characteristics highlighted in this study can assist in the identification of the taxon and contribute to the control of the quality of this plant drug. The evaluation of the latex in relation to HRT-18 cells demonstrated action after 48 h of experiment. In contrast, in relation to HeLa cells its induced cytotoxicity in all times and a dose-dependent manner. The IC50 values (72 h observed were 252.58 ± 18.51 µg/ml and 263.42 ± 15.92 µg/ml to MTT experiment and 250.18 ± 19.48 µg/ml and 430.56 ± 19.71 µg/ml to NR experiment for the HeLa and HRT-18 cells, respectively.

Towards anti-corrosion coatings from surfactant-free latexes based on maleic anhydride containing polymers

NARCIS (Netherlands)

Soer, W.J.; Ming, W.; Koning, C.E.; Benthem, van R.A.T.M.

2008-01-01

We report on the film formation of surfactant-free, artificial latexes based on copolymers containing maleic anhydride. Different metallic substrates, such as aluminum, steel and magnesium alloys, were coated with three different latexes. A commercial polyester based coating was used as a

Radiation graft copolymerization of n-butyl acrylate on natural rubber latex

International Nuclear Information System (INIS)

Sundardi, F.; Kadariah, S.

1986-01-01

A method of radiation graft copolymerization of n-butyl acrylate (NBA) on natural rubber (NR) latex has been studied. The rate of conversion increases with the increase of NBA in latex. An irradiation dose of about 12 kGy is needed to obtain 90% conversion with 40 phr of NBA in latex. Tensile strength, tear strength, and elongation at break of grafted NR are found to decrease with increasing degree of grafting. The physical strength of a vulcanizate prepared from a mixture of NR and ply-NBA was found to be better than that of NBA-NR graft copolymer vulcanizate. The graft copolymerization reaction takes place in the outer layer of NR particles, and because the secondary bonds between poly-NBA molecules may be weaker than those between NR molecules, the existence of a poly-NBA layer in NR particles will decrease its physical strength

Maillard Reaction in Natural Rubber Latex: Characterization and Physical Properties of Solid Natural Rubber

Directory of Open Access Journals (Sweden)

S. Montha

2016-01-01

Full Text Available Maillard reaction in Natural Rubber (NR latex was investigated by treating fresh NR latex with glutaraldehyde (C5H8O2 in amounts of 0, 50, 100, and 200 mmol/kg of latex. Protein cross-linking in fresh NR latex and solid NR was confirmed by using sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE and attenuated total reflection infrared (ATR-IR spectroscopy, respectively. It was found that degree of protein cross-linking in NR increased with increasing C5H8O2 concentration. Physical properties of untreated and treated NR substances in terms of gel content, initial Wallace plasticity (P0, plasticity retention index (PRI, Mooney viscosity, and tensile strength were carefully explored. Results clearly showed that the Maillard cross-linking of proteins had remarkable effect on bulk NR properties, that is, solvent resistance, hardness, resistance to oxidation, rheological behavior, and resistance to stretching out.

Evaluation of peptides release using a natural rubber latex biomembrane as a carrier.

Science.gov (United States)

Miranda, M C R; Borges, F A; Barros, N R; Santos Filho, N A; Mendonça, R J; Herculano, R D; Cilli, E M

2018-05-01

The biomembrane natural (NRL-Natural Rubber Latex), manipulated from the latex obtained from the rubber tree Hevea brasiliensis, has shown great potential for application in biomedicine and biomaterials. Reflecting the biocompatibility and low bounce rate of this material, NRL has been used as a physical barrier to infectious agents and for the controlled release of drugs and extracts. The aim of the present study was to evaluate the incorporation and release of peptides using a latex biomembrane carrier. After incorporation, the release of material from the membrane was observed using spectrophotometry. Analyses using HPLC and mass spectroscopy did not confirm the release of the antimicrobial peptide [W 6 ]Hylin a1 after 24 h. In addition, analysis of the release solution showed new compounds, indicating the degradation of the peptide by enzymes contained in the latex. Additionally, the release of a peptide with a shorter sequence (Ac-WAAAA) was evaluated, and degradation was not observed. These results showed that the use of NRL as solid matrices as delivery systems of peptide are sequence dependent and could to be evaluated for each sequence.

Frequent IgE sensitization to latex, cow's milk, and egg in children with short bowel syndrome.

Science.gov (United States)

Mazon, Angel; Solera, Eva; Alentado, Noemi; Oliver, Fernando; Pamies, Rafael; Caballero, Luis; Nieto, Antonio; Dalmau, Jaime

2008-03-01

Children with short bowel syndrome (SBS) undergo frequent operations, so they are at risk for sensitizing to latex. There have been isolated reports of sensitization to food in these children. In a cross-sectional study, we assessed sensitization to latex, cow's milk, and egg with skin prick tests (SPT) and serum-specific immunoglobulin E (IgE) in 14 children with SBS. Data were collected about the number of operations with latex devices, serum total IgE, and history of feeding with milk formula. Ten children were sensitized to latex (specific IgE median: 6.7 kU/l, range: 0.5-33). Compared with those non-sensitized, sensitized children had significantly (p range: 0.5-21.1 kU/l), and five to egg (specific IgE median: 0.68, range: 0.58-2.17 kU/l). Except for some isolated days with cow's milk formula, the children had been initially fed with a diet without intact cow's milk proteins. Sensitization to latex, cow's milk, and egg is very frequent in children with SBS. They should be treated in a latex-free environment since the very early stages of the disease, and should be routinely studied regarding food sensitization, as this might contribute as an added factor in the chronic diarrhea of these patients.

Impairment induced by chronic occupational cadmium exposure during brazing process

International Nuclear Information System (INIS)

Anwar, S.M.; Aly, M.M.

2002-01-01

Cadmium (CD) is considered a metal of the 20 th century to which all inhabitants of develop societies are exposed. Long-term occupational and environmental exposure to CD often results in renal dysfunction as the kidney is considered the critical target organ. The aim of this work was to evalutate both resporatory and renal manifestations induced by occupational exposure to CD compounds during brazing process, and suggesting a protocol for prevention and control for CD- induced health effects. This study was conducted on 20 males occupationally exposed workers. They are divided into two groups: Group-1 included (10) exposed smokers and group-2 included (10) exposed non-smokers. Results of both groups were compared with those of 10 healthy age and sex matched non-smokers. All subjects were subjected to detailed history taking and laboratory investigations including blood and urinary CD, liver profile (SGOT, SGPT and alkline phosphates), kindey function tests (blood urea, creatinine and urinary beta 2 - microglobulin). The level of Cd in the atmosphere of the work plase air was also assessed to detect the degree of exposure as it was about 6 times greater than thesave level (1 mu /m 3 ). (1) This study demonstrated elevation levels of blood CD, urea, creatinine and urinary CD and beta 2 -microglobulin for both exposed worker groups than the controls. In additions no appreciable were noted for liver function tests, although the levels fell within normal range

The evolution and use of a personal LaTeX metapackage

DEFF Research Database (Denmark)

Andersen, Esben Sloth

This document defines and describes esameta.sty and its variant esametaps.sty. They are personal LATEX packages that largely consist of calls of other packages. These 'metapackages' are selected to help the development of the author's complex book and paper projects-but some of his decisions migh...... be of more general relevance. The use of the LATEX system of 'literate programming' and the testing the compatibility of new commands and packages with the previously included parts of the metapackage should also be noticed....

Residual monomer reduction in polymer latex products by extraction with supercritical carbon dioxide

NARCIS (Netherlands)

Aerts, M.; Meuldijk, J.; Kemmere, M.F.; Keurentjes, J.T.F.

2011-01-01

Extraction of residual monomer from a latex product with supercritical carbon dioxide ((sc)CO2) in a column was studied. Operating conditions were chosen at 35¿°C and 100 bar. For reducing the residual styrene level in a polystyrene latex from 104 ppm to 100¿ppm and from 104 ppm to 10¿ppm, a

Incidence of latex harvesting technologies on agronomic and ...

African Journals Online (AJOL)

parameters and profitability of some rapid metabolic class clones of rubber ... of hormonal stimulation had no negative influence on the vegetative growth ..... yield (2597) was obtained with the control ..... metabolic energy of latex vessels as.

Research priorities in mental health occupational therapy: A study of clinician perspectives.

Science.gov (United States)

Hitch, Danielle; Lhuede, Kate

2015-10-01

The evidence to support mental health occupational therapy has proliferated in the early years of this century, but this growth has tended to be organic rather than targeted. Previous efforts to identify research priorities in this area of practice are either out dated, or encompass discrete areas of practice. The aim of this study was to identify priority areas for research in mental health occupational therapy from clinician's perspectives. A Policy Delphi method was used to enable occupational therapists to define and differentiate their perspectives on research priorities. Forty-two occupational therapists took part in the first two rounds of this method, with 69% (n = 29) going on to complete the third and final round of data collection. A Likert scale was used to rate the importance of each priority, and descriptive quantitative analysis undertaken to identify those most consistently identified as being highly important. Four research priorities were identified as being highly important in this study: (i) working in an occupationally focussed way; (ii) consumer experience of therapy groups; (iii) identifying factors which increase consumer engagement in occupation; and (iv) engaging patients on the inpatient unit in meaningful and positive occupation. Two of the priority areas are already the subject of substantial evidence bases, but there has been far less research into consumer experiences of groups and occupational engagement in acute settings. Collaboration between research teams and greater consumer inclusion are recommended for the future. This study provides an updated indication of research priorities for mental health occupational therapy in Australia. © 2015 Occupational Therapy Australia.

Latex allergy: new insights to explain different sensitization profiles in different risk groups.

Science.gov (United States)

Peixinho, C; Tavares-Ratado, P; Tomás, M R; Taborda-Barata, L; Tomaz, C T

2008-07-01

Differences in latex allergen sensitization profiles have been described between children subjected to repetitive surgical interventions and health care workers (HCW). 'Major' allergens for patients with spina bifida are Hev b 1, 3 and 7, while for HCW, 'major' allergens are Hev b 2, 5, 6.01 and 13. The reason for these differential sensitization profiles is currently unknown. To investigate latex allergen profiles on internal and external surfaces of natural rubber latex gloves. Eighty-two samples of commonly used surgical gloves (41 glove brands) were used for analysis. Specific allergen levels of Hev b 1, 3, 5 and 6.02 on both surfaces of the gloves were quantified using an enzyme immunometric assay, a FITkit (FIT Biotech, Tampere, Finland). Differences in allergen levels were observed between internal and external surfaces of all glove types. Concentrations of Hev b 1 and Hev b 3 were significantly higher on external surfaces, while internal surfaces had higher allergen levels of Hev b 5 and Hev b 6.02. Analysis of surgical and examination gloves, powdered and nonpowdered gloves also showed that the content of Hev b 5 and Hev b 6.02 was significantly higher on internal surfaces while that of Hev b 1 and Hev b 3 was higher on external surfaces. Our study showed different allergen profiles on internal and external surfaces of natural rubber latex gloves. These results may suggest a relationship between latex allergen localization and sensitization routes in different risk groups.

Changes in chemical permeation of disposable latex, nitrile, and vinyl gloves exposed to simulated movement.

Science.gov (United States)

Phalen, Robert N; Le, Thi; Wong, Weng Kee

2014-01-01

Glove movement can affect chemical permeation of organic compounds through polymer glove products. However, conflicting reports make it difficult to compare the effects of movement on chemical permeation through commonly available glove types. The aim of this study was to evaluate the effect of movement on chemical permeation of an organic solvent through disposable latex, nitrile, and vinyl gloves. Simulated whole-glove permeation testing was conducted using ethyl alcohol and a previously designed permeation test system. With exposure to movement, a significant decrease (p ≤ 0.001) in breakthrough time (BT) was observed for the latex (-23%) and nitrile gloves (-31%). With exposure to movement, only the nitrile glove exhibited a significant increase (p ≤ 0.001) in steady-state permeation rate (+47%) and cumulative permeation at 30 min (+111%). Even though the nitrile glove provided optimum chemical resistance against ethyl alcohol, it was most affected by movement. With exposure to movement, the latex glove was an equivalent option for overall worker protection, because it was less affected by movement and the permeation rate was lower than that of the nitrile glove. In contrast, the vinyl glove was the least affected by movement, but did not provide adequate chemical resistance to ethyl alcohol in comparison with the nitrile and latex gloves. Glove selection should take movement and polymer type into account. Some glove polymer types are less affected by movement, most notably the latex glove in this test. With nitrile gloves, at least a factor of three should be used when attempting to assign a protection factor when repetitive hand motions are anticipated. Ultimately, the latex gloves outperformed nitrile and vinyl in these tests, which evaluated the effect of movement on chemical permeation. Future research should aim to resolve some of the observed discrepancies in test results with latex and vinyl gloves.

Prevalence of manufacturing defects in latex examination gloves used in selected dental practices in central Saudi Arabia.

Science.gov (United States)

Al-Swuailem, Abdullah S

2014-07-01

To assess the defect rates in latex examination gloves used in selected dental practices in Riyadh, Saudi Arabia. In this cross-sectional study, a total of 796 latex examination gloves were collected from 5 governmental hospitals and 5 private dental practices between April 2012 and May 2012. The gloves were assessed for presence of defects visually (VT) and using water inflation test (WIT). One and 2 sample t-tests were used to assess significant differences in defect rates among each latex brand, and between governmental hospitals and private dental practices. Defects in latex gloves were more likely to be identified using WIT compared with VT (20.2% versus 4.3%, p=0.000). Using WIT, examined latex gloves had a defect rate approximately 8 times the acceptable quality level of 2.5% (20.2%, p=0.000). Using WIT, gloves used in private dental practices had significantly higher defect rates compared with governmental dental clinics (25.6% versus 14.6%, p=0.006). Most latex examination gloves used in the sampled governmental dental clinics and private dental practices in Riyadh had significantly higher preexisting defect rates than acceptable standard levels.

A latex agglutination test for the field determination of abnormal vitellogenin production in male fishes contaminated by estrogen mimics

International Nuclear Information System (INIS)

Magalhaes, Ilizabete; Pihan, Jean-Claude; Falla, Jairo

2004-01-01

Estrogen mimics are pollutants present in the aquatic environment. These compounds induce abnormalities in the reproductive system of male fishes, which lead to a total or partial male feminization, or to their demasculinization. Ultimately, these alterations could lead to a disappearance of the total contaminated fish population. Moreover, these toxic substances possess the capacity to mimic endogenous estrogens and to induce the abnormal production of vitellogenin (VTG) in male and immature fishes. The purpose of this research was to develop an easy, specific, cheap and fast method for diagnosing the contamination of male fishes by estrogen mimics, using VTG as biomarker. The selected method is based on a reverse latex agglutination test (rLAT), developed with monoclonal antibodies specific of this biomarker. The development of this VTG-rLAT has involved, firstly, the purification of carp VTG to produce monoclonal antibodies, specifics of this protein. One of these antibodies was selected to recover latex particles (diameter: 1 μm). Finally, the immunoreactivity of the VTG-rLAT was verified with different fish plasma samples from males treated with 17β-estradiol and non-treated males or females in vitellogenesis

Comparative evaluation of Type 1 latex hypersensitivity in patients with chronic urticaria, rubber factory workers and healthy control subjects

NARCIS (Netherlands)

Piskin, Gamze; Akyol, Aynur; Uzar, Hatice; Tulek, Necla; Boyvat, Ayse; Gurgey, Erbak

2003-01-01

Latex hypersensitivity manifests itself most commonly with contact urticaria. In this study, we investigated the frequency of latex hypersensitivity as a possible aetiological factor in patients with chronic urticaria (CU) and compared latex hypersensitivity of CU patients (n = 50) with that of

Molecular markers for assessment of radiation-induced oxidant stress of occupationally exposed persons

International Nuclear Information System (INIS)

Stankova, K.; Zaharieva, E.; Aneva, N.; Kazarska, O.; Boteva, R.

2013-01-01

Full text: Introduction: The biological effects of ionizing radiation (IR) are mainly due to high creativity, oxygen - containing free radicals and molecules known as Reactive Oxygen Species (ROS). After irradiation the cells accumulate ROS, which may induce destructive changes in all cell structures and macromolecules (membranes, DNA, RNA , proteins and enzymes) and result in abnormalities on cell and tissue level. The effects of ROS are particularly important in chronic oxidative stress induced by prolonged occupational exposure that can permanently disrupt cellular redox homeostasis, which increase the risk of oncogenic, neurodegenerative, cardiovascular and other diseases. This requires the study of the antioxidant status of the Kozloduy NPP personnel who are professionally exposed to low dose irradiation. Materials and methods: As an antioxidant status markers, changes in the levels of the ROS and the electrochemical potential at mitochondrial lymphocytes (both before and after their additional in vitro exposure to 3 Gy), as well as the antioxidant activity of blood plasma are analyzed. The study was conducted with spectral methods and includes 40 professionally exposed people from the Kozloduy NPP (mean age 44.3, and radiation exposure from 0,1 to 257,9 mSv) and 20 unexposed controls (mean age 46.5 years). Results: Statistical analysis of the data shows that chronic exposure to low doses IR as a result of occupation exposure does not lead to significant changes in the levels of the ROS, the antioxidant activity of plasma and mitochondrial electrochemical potential. More significant impact on these indicators proves the age of the respondents, which is explained by a decrease in the activity of the cellular reparative and antioxidant systems induced by the natural processes of aging. Results for occupational exposure and non-exposure persons were heterogeneous due to the individual radio sensitivity of the persons included in biomonitoring. Conclusion

Extractable protein of radiation vulcanized natural rubber latex

International Nuclear Information System (INIS)

Soebianto, Y.S.; Upul, R.M.; Makuuchi, K.; Yoshii, F.; Kume, T.

2000-01-01

A new method to reduce the protein level in the latex products by irradiation is reported. Water soluble protein (WSP) solution (10%) was added into radiation vulcanized NR latex (RVNRL) as much as 3 phr in three different processes: added to RVNRL, added to re-centrifuged RVNRL, and added to RVNRL followed by centrifugation. The protein content was determined by enhanced BCA method, and identified by SDS-PAGE analysis. Addition of WSP followed by centrifugation reduces EP up to the minimum protein detection, and shortens the leaching time to 20-30 min. SDS-PAGE analysis confirms the reduction of soluble protein in the serum phase, and disappearance of protein bands in the rubber extract. Protein-WSP interaction produces water soluble complex, and removed by centrifugation. The molecular weight of WSP dictates the efficiency of protein removal. (author)

Extractable protein of radiation vulcanized natural rubber latex

Energy Technology Data Exchange (ETDEWEB)

Soebianto, Y.S. [Center for Research and Development of Isotopes and Radiation Technology, BATAN, Jakarta (Indonesia); Upul, R.M. [Rubber Research Institute of Sri Lanka, Ratmalana (Sri Lanka); Makuuchi, K.; Yoshii, F.; Kume, T. [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

2000-03-01

A new method to reduce the protein level in the latex products by irradiation is reported. Water soluble protein (WSP) solution (10%) was added into radiation vulcanized NR latex (RVNRL) as much as 3 phr in three different processes: added to RVNRL, added to re-centrifuged RVNRL, and added to RVNRL followed by centrifugation. The protein content was determined by enhanced BCA method, and identified by SDS-PAGE analysis. Addition of WSP followed by centrifugation reduces EP up to the minimum protein detection, and shortens the leaching time to 20-30 min. SDS-PAGE analysis confirms the reduction of soluble protein in the serum phase, and disappearance of protein bands in the rubber extract. Protein-WSP interaction produces water soluble complex, and removed by centrifugation. The molecular weight of WSP dictates the efficiency of protein removal. (author)

NR based curred latex material reclaimed with 2,2'-dibenzamidodiphenyldisulphide in truck tyre tread compound

NARCIS (Netherlands)

Rajan, V.V.; Dierkes, Wilma K.; Joseph, R.; Noordermeer, Jacobus W.M.

2006-01-01

It is observed that reclamation of natural rubber latex based rubber using 2,2'-dibenzamidodiphenyldisulphide as reclaiming agent is an optional methodology for recycling of waste latex rubber (WLR). For progressive replacement of virgin natural rubber by the reclaim, two alternatives curing system

Latex agglutination test (LAT) for the diagnosis of typhoid fever.

Science.gov (United States)

Sahni, Gopal Shankar

2013-06-01

The efficacy of latex agglutination test in the rapid diagnosis of typhoid fever was studied and the result compared with that of blood culture. This study included 80 children suffering from typhoid fever, among which 40 were confirmed by blood culture isolation and 40 had possible typhoid fever based on high Widal's titre (a four-fold rise in the titre of antibody to typhi "O" and "H" antigen was considered as a positive Widal's test result). Eighty children, 40 with febrile illness confirmed to be other than typhoid and 40 normal healthy children were used as negative controls. The various groups were: (i) Study group ie, group I had 40 children confirmed by culture isolation of Salmonella typhi(confirmed typhoid cases). (ii) Control groups ie, (a) group II with 40 febrile controls selected from paediatrics ward where cause other than S typhi has been established, (b) group III with 40 afebrile healthy controls that were siblings of the children admitted in paediatric ward for any reason with no history of fever and TAB vaccination in the last one year, and (c) group IV with 40 children with high Widal's titre in paired sera sample. Widal's test with paired sera with a one week interval between collections were done in all 40 patients. Latex aggtutination test which could detect 900 ng/ml of antigen as observed in checker board titration, was positive in all 40 children from group I who had positive blood culture and in 30 children from group IV who had culture negative and had high Widal's titre positive. Latex agglutination test was positive in 4 children in group II and none in group III. Using blood culture positive cases as true positive and children in groups II and III as true negative, the test had a sensitivity of 100% and specificity of 96%. Latex agglutination test was found to be significantly sensitive (100%) and specific (96%) and could detect 75% more cases in group IV (possible typhoid cases). Thus latex agglutination test can be used for rapid

Transient Side Load Analysis of Out-of-Round Film-Cooled Nozzle Extensions

Science.gov (United States)

Wang, Ten-See; Lin, Jeff; Ruf, Joe; Guidos, Mike

2012-01-01

There was interest in understanding the impact of out-of-round nozzle extension on the nozzle side load during transient startup operations. The out-of-round nozzle extension could be the result of asymmetric internal stresses, deformation induced by previous tests, and asymmetric loads induced by hardware attached to the nozzle. The objective of this study was therefore to computationally investigate the effect of out-of-round nozzle extension on the nozzle side loads during an engine startup transient. The rocket engine studied encompasses a regeneratively cooled chamber and nozzle, along with a film cooled nozzle extension. The computational methodology is based on an unstructured-grid, pressure-based computational fluid dynamics formulation, and transient inlet boundary flow properties derived from an engine system simulation. Six three-dimensional cases were performed with the out-of-roundness achieved by three different degrees of ovalization, elongated on lateral y and z axes: one slightly out-of-round, one more out-of-round, and one significantly out-of-round. The results show that the separation line jump was the primary source of the peak side loads. Comparing to the peak side load of the perfectly round nozzle, the peak side loads increased for the slightly and more ovalized nozzle extensions, and either increased or decreased for the two significantly ovalized nozzle extensions. A theory based on the counteraction of the flow destabilizing effect of an exacerbated asymmetrical flow caused by a lower degree of ovalization, and the flow stabilizing effect of a more symmetrical flow, created also by ovalization, is presented to explain the observations obtained in this effort.

Minimizing surgical skin incision scars with a latex surgical glove.

Science.gov (United States)

Han, So-Eun; Ryoo, Suk-Tae; Lim, So Young; Pyon, Jai-Kyung; Bang, Sa-Ik; Oh, Kap-Sung; Mun, Goo-Hyun

2013-04-01

The current trend in minimally invasive surgery is to make a small surgical incision. However, the excessive tensile stress applied by the retractors to the skin surrounding the incision often results in a long wound healing time and extensive scarring. To minimize these types of wound problems, the authors evaluated a simple and cost-effective method to minimize surgical incision scars based on the use of a latex surgical glove. The tunnel-shaped part of a powder-free latex surgical glove was applied to the incision and the dissection plane. It was fixed to the full layer of the dissection plane with sutures. The glove on the skin surface then was sealed with Ioban (3 M Health Care, St. Paul, MN, USA) to prevent movement. The operation proceeded as usual, with the retractor running through the tunnel of the latex glove. It was possible to complete the operation without any disturbance of the visual field by the surgical glove, and the glove was neither torn nor separated by the retractors. The retractors caused traction and friction during the operation, but the extent of damage to the postoperative skin incision margin was remarkably less than when the operation was performed without a glove. This simple and cost-effective method is based on the use of a latex surgical glove to protect the surgical skin incision site and improve the appearance of the postoperative scar. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Gamma irradiator design concepts for radiation vulcanisation of natural rubber latex

International Nuclear Information System (INIS)

Aggarwal, K.S.; Muralidharan, P.; Apte, M.G.; Kalurkar, A.R.; Shah, B.M.

1990-01-01

Radiation vulcanisation of natural rubber latex (NRL) is a new and yet unproven technology and one which involves undefined problems of consumer acceptance and high degree of radiation risk. Therefore, the designer should take care that the initial capital cost of the plant is as low as possible to keep the unit processing cost low during the initial lean period of the product requirement by the market. Three irradiators to process natural rubber latex have been designed as per capacity requirement of the user. Their salient features are described. (author). 2 tabs., 24 figs

Status RVNRL in German latex industry and its introduction to the European market

International Nuclear Information System (INIS)

Bez, W.

1996-01-01

Reasons to look for an alternative crosslinking system avoiding sulphur curing was the restrictive policy of the German Health Authorities concerning nitrosamines. It was concluded that radiation curing offers further advantages . By avoiding the accelerators, type IV allergy is excluded, cytotoxicity is minimised to a very low level, films have better clarity and when thoroughly leached higher electrical resistance. Treatment of waste give no SO sub 2 emissions by burning, no Zinc in the ashes and possibly better microbial degradation. A development was carried out to irradiate natural latex by electron beam with a Dynamitron equipment. It was found trimethylolpropanetrimethacrylate to be a suitable sensitizer. Because of to high prices this development was interrupted. For future application trials and efforts to introduce RVNRL in the market gamma ray radiated natural latex either from Batan, Indonesia or MINT, Malaysia are used. Mainly dipped goods were produce, but radiated natural latex has shown good results in other processes. During discussions with customers it has proved necessary to establish specifications for RVNRL. A serious problem using natural latex for the production of medical devices is the type I allergy. Attempts are made to dip surgical gloves, leach them thoroughly and control extractable proteins were reduced to the very low level of 6.5 μg/g. Out of 18 patients sensitive to natural latex protein wearing gloves made from RVNRL only six have shown a positive response. That means RVNRL could help to solve the protein allergy problem. Further developments on this line are scheduled

Occupational allergic contact dermatitis caused by sterile non-latex protective gloves: clinical investigation and chemical analyses.

Science.gov (United States)

Pontén, Ann; Hamnerius, Nils; Bruze, Magnus; Hansson, Christer; Persson, Christina; Svedman, Cecilia; Thörneby Andersson, Kirsten; Bergendorff, Ola

2013-02-01

An increased frequency of occupational contact hand dermatitis among surgical operating theatre personnel has been noticed. To evaluate patients with occupational contact dermatitis caused by their rubber gloves, and to describe a method for analysing the content of the allergens in the gloves. Patch tests were performed with the baseline series, a rubber chemical series, and the patients' own gloves. A method for analysing 1,3-diphenylguanidine (DPG) and cetylpyridinium chloride in the gloves was developed. Contact allergy to thiuram mix was found in 8 of 16 patients, whereas 12 of 16 patients reacted to DPG. In 7 of 8 patients, contact allergy to cetylpyridinium chloride was found. In the patients' gloves, cetylpyridinium chloride and DPG were detected at higher concentrations on the inside of the gloves than on the outside. Most patients had worked for decades in their present occupations, but their hand dermatitis had only been present for months. Contact allergy to DPG in gloves has been disputed, but, in this study, we were able to confirm the presence of DPG and cetylpyridinium chloride in the causative gloves by using a modified method for the analysis. The presence of these chemicals in gloves caused an increase in occupational contact dermatitis in surgical operating theatre personnel. © 2012 John Wiley & Sons A/S.

CHEMICAL EXAMINATION OF JACK TREE LATEX AND

Indian Academy of Sciences (India)

and on Saponification yielded fatty acids, Volatile as well as non-volatile. The unsaponifiable portion on repeated crystallisation provided a crystal- line, sharp melting compound which was identified as artostenone? from a. Latex (200 c.c.). ത്ത min- pe. Coagulum (A) Aqueous alcoholic solution (B). Acetone or ethyl acetate ...

Efficacy of protection by latex gloves during orthodontic therapy.

Science.gov (United States)

Doll, G M; Zentner, A; Balan, R; Sergl, H G

2000-01-01

The wearing of gloves during orthodontic or dental treatment is generally indicated for reasons of hygiene and protection against infection. This study was aimed at determining the extent and localization of perforations caused by the various orthodontic treatment techniques and interrupting the infection barrier. The impermeability was tested by means of a water retention test according to European standard EN 455, Part 1, performed on 1600 Centramed (Centramed, Koblenz), Tekmedic and SafeEx non-sterile disposable latex gloves (both by Safe Med, Switzerland) and Safe Gan latex gloves with an additional acrylate coating (also by Safe Med). The perforation rate in unused gloves was between 0.5% and 7.5%, rising on average to 11% with increasing use. 36% of the total number of lesions resulted from handling removable appliances, and 57% from handling fixed appliances, especially when replacing arch wires and elastics. Most lesions were in the thumb, index finger and palm region. Only 18% of the defects were noticed by the dentists themselves. The gloves worn by beginners in their first year of postgraduate orthodontic training had about twice as many defects as those worn by qualified orthodontists. When patients with an increased risk of infection are to be treated, additional hand disinfection measures should be taken and 2 pairs of gloves worn in view of the relatively unreliable protection offered by commercially available latex gloves.

Assessment of the mutagenic and antimutagenic activity of Synadenium umbellatum Pax latex by micronucleus test in mice

Directory of Open Access Journals (Sweden)

PR. Melo-Reis

Full Text Available Synadenium umbellatum Pax, popularly known as "cola-nota", is a medicinal plant that grows in tropical regions. The latex of this plant is used against various diseases, such as diabetes mellitus, leprosy, tripanosomiasis, leukemia, and several malignant tumors. The mutagenic, antimutagenic, and cytotoxic effects of the latex of this plant were investigated by measuring the frequency of micronuclei in mice bone marrow cells. To evaluate mutagenicity, the animals were treated with four doses of latex (10, 30, 50, and 100 mg/kg body weight. To study the antimutagenic activity, the animals were simultaneously treated with latex and mitomycin C (4 mg/kg. The cytotoxicity was evaluated by polychromatic and normochromatic erythrocytes ratio. Our results showed a significant increase of frequency of micronucleated polychromatic erythrocytes (MNPCE compared to the negative control group (p 0.05 was detected at the doses of 50 and 100 mg/kg. Under our experimental conditions, the results obtained indicate strong mutagenic and cytotoxic activity of S. umbellatum latex except the dose of 10 mg/kg and moderate antimutagenic effect at lower doses.

Effect of magnetic and thermal properties of iron oxide nanoparticles (IONs) in nitrile butadiene rubber (NBR) latex

International Nuclear Information System (INIS)

Ong, Hun Tiar; Julkapli, Nurhidayatullaili Muhd; Hamid, Sharifah Bee Abd; Boondamnoen, O.; Tai, Mun Foong

2015-01-01

Nitrile butadiene rubber (NBR) gloves are one of the most important personal protective equipments but they are possible to tear off and contaminate food or pharmaceutical and healthcare products during manufacturing and packaging process. High tendency of torn glove remaining in food or products due to white or light flesh-coloured glove is not easy to be detected by naked eyes. In this paper, iron oxide nanoparticles (IONs) selected as additive for NBR to improve its detectability by mean of magnetic properties. IONs synthesized via precipitation method and compounded with NBR latex before casting on petri dish. The properties of IONs were investigated by X-ray Diffractometry (XRD), Transmission Electron Microscope (TEM), Raman Spectroscopy and Vibrating Sample Magnetometer (VSM). Meanwhile NBR/IONs composites were studied by Thermogravimetry Analysis (TGA), Differential Scanning Calorimetry (DSC) and Vibrating Sample Magnetometer (VSM). It observed that, synthesized IONs shows of 25.28 nm crystallite with 25.86 nm semipherical (changed as) shape. Meanwhile, Magnetite and maghemite phase are found in range of 670 cm −1 and 700 cm −1 respectively, which it contributes magnetization saturation of 73.96 emu/g at 10,000 G by VSM. Thermal stability and magnetic properties were increased with incorporating IONs into NBR latex up to 20 phr. NBR/IONs 5 phr has the optimum thermal stability, lowest glass transition temperature (−14.83 °C) and acceptable range of magnetization saturation (3.83 emu/g at 10,000 G) to form NBR gloves with magnetic detectability. - Highlights: • We synthesized IONs with high magnetization saturation (M s ). • High M s of IONs were incorporated into NBR latex in order to induce magnetic properties in the NBR composite. • Introduction of IONs into NBR latex would improve thermal properties. • The produced NBR/IONs 5 phr composite exceeded the minimum magnetic moment sensor of the detector. • They have high potential for the

Effect of magnetic and thermal properties of iron oxide nanoparticles (IONs) in nitrile butadiene rubber (NBR) latex

Energy Technology Data Exchange (ETDEWEB)

Ong, Hun Tiar; Julkapli, Nurhidayatullaili Muhd; Hamid, Sharifah Bee Abd, E-mail: sharifahbee@um.edu.my; Boondamnoen, O.; Tai, Mun Foong

2015-12-01

Nitrile butadiene rubber (NBR) gloves are one of the most important personal protective equipments but they are possible to tear off and contaminate food or pharmaceutical and healthcare products during manufacturing and packaging process. High tendency of torn glove remaining in food or products due to white or light flesh-coloured glove is not easy to be detected by naked eyes. In this paper, iron oxide nanoparticles (IONs) selected as additive for NBR to improve its detectability by mean of magnetic properties. IONs synthesized via precipitation method and compounded with NBR latex before casting on petri dish. The properties of IONs were investigated by X-ray Diffractometry (XRD), Transmission Electron Microscope (TEM), Raman Spectroscopy and Vibrating Sample Magnetometer (VSM). Meanwhile NBR/IONs composites were studied by Thermogravimetry Analysis (TGA), Differential Scanning Calorimetry (DSC) and Vibrating Sample Magnetometer (VSM). It observed that, synthesized IONs shows of 25.28 nm crystallite with 25.86 nm semipherical (changed as) shape. Meanwhile, Magnetite and maghemite phase are found in range of 670 cm{sup −1} and 700 cm{sup −1} respectively, which it contributes magnetization saturation of 73.96 emu/g at 10,000 G by VSM. Thermal stability and magnetic properties were increased with incorporating IONs into NBR latex up to 20 phr. NBR/IONs 5 phr has the optimum thermal stability, lowest glass transition temperature (−14.83 °C) and acceptable range of magnetization saturation (3.83 emu/g at 10,000 G) to form NBR gloves with magnetic detectability. - Highlights: • We synthesized IONs with high magnetization saturation (M{sub s}). • High M{sub s} of IONs were incorporated into NBR latex in order to induce magnetic properties in the NBR composite. • Introduction of IONs into NBR latex would improve thermal properties. • The produced NBR/IONs 5 phr composite exceeded the minimum magnetic moment sensor of the detector. • They have high

The Wheels of Stress Go 'Round and 'Round

Science.gov (United States)

Brey, Rebecca A.; Clark, Susan E.

2012-01-01

"The Wheels of Stress Go Round and Round" teaching idea uses three activity wheels to reinforce stress-related content and concepts. After presenting a definition of stress, the instructor assists students in identifying stressors, and aids in formulating a list of negative, reactive behaviors and a list of positive coping mechanisms. Using…

["Round back" in children and adolescents].

Science.gov (United States)

Garoflid, N; Fragnière, B; Dutoit, M

2000-10-01

The hyper-kyphosis or "the postural round back" is one of the most common complaints in orthopedic practice. In the majority of cases, the thoracic kyphosis are painless and flexible. The vertebral bodies are normal on radiograms. This is "the kyphotic attitude" or postural round-back. A medical treatment is not the necessary rule. Life hygiene, sports and simple supervision are needed. Nevertheless, there are still pathological fixed kyphosis, induced in the majority of cases by Scheuermann's disease. The other possible etiologies (congenital, paralytic, post-traumatic, Pott's disease, postradiation, or metabolic origin) are a lot rare ones and will be excluded by clinical examination and imaging studies. The structural hyper-kyphosis require treatment. We will approach successively steps of the diagnosis and treatment of the hyper-kyphosis of the adolescent.

Optical response of a flat metallic surface coated with a monolayer array of latex spheres

International Nuclear Information System (INIS)

Shi Lei; Liu Xiaohan; Yin Haiwei; Zi Jian

2010-01-01

We report on the fabrication, characterization and simulation of a structure consisting of a flat metallic surface coated with a monolayer array of latex spheres. This structure shows interesting optical response: over flat metallic surfaces a series of reflection minima appear in reflection spectra. Numerical simulations revealed that the structure can support two types of surface modes: surface plasmon-polaritons bound at the metallic surface and guided modes confined to the array of latex spheres, or their hybrids. Both experimental and theoretical results indicated that these surface modes show well-defined band structures due to the introduced periodicity by the monolayer array of latex spheres.

Round atelectases

International Nuclear Information System (INIS)

Hanke, R.; Kretzschmar, R.

1983-01-01

a) For several reasons Sinner's paper calls for critical remarks: His term ''Pleuroma'' for a neither pleural nor tumorous but intrapulmonary and atelectatic mass lesion lacks any anatomical and histological basis and is misleading at that because it pretends a tumor of the pleura; his statement in the summary that atelectatic pseudotumors of the lung show a tumorcell-like cytoarchitecture is surprising without being further discussed by the author; he encourages risky invasive diagnostical procedures even in cases where the radiological diagnosis of round atelectasis is unmistakable; already known radiologic features of round atelectases are presented by him as hitherto undescribed; his conceptions of the formal development of round atelectases and of their most characteristic features can not be agreed with. b) The different forms of round atelectases and their residuals are presented with tomograms and with diagrams of their formal development from our point of view. (orig.) [de

Development assessment of natural latex membranes: a new proposal for the treatment of amblyopia

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Jaqueline Alves; Rosa, Suelia Rodrigues Fleury, E-mail: jackalvesribeiro@gmail.com [Laboratorio de Engenharia e Biomaterial (BioEngLab), Faculdade Gama, Universidade de Brasilia (UnB), DF (Brazil); Leite, Cicilia Raquel Maia; Vasconcelos, Claudio Lopes; Soares, Joao Maria [Universidade do Estado do Rio Grande do Norte (UERN), Mossoro, RN (Brazil)

2017-05-15

The ophthalmic dysfunction amblyopia, commonly known as lazy eye, is characterized by decreased vision in one eye due to improper development in childhood. The aim of this study was to obtain and characterize natural rubber membranes and to assess their utility as an eye film capable of altering the passage of light. The latex membranes were produced using the Van Gogh method and the deposition technique and were analyzed by physical and chemical methods to determine the properties of latex in natura and of natural rubber membranes. The materials were characterized by X-ray diffractometry, scanning electron microscopy, thermogravimetry, differential scanning calorimetry, analysis of water sorption and light crossing analysis. We report here a new approach to the treatment of patients with amblyopia using latex membranes. (author)

Development assessment of natural latex membranes: a new proposal for the treatment of amblyopia

International Nuclear Information System (INIS)

Ribeiro, Jaqueline Alves; Rosa, Suelia Rodrigues Fleury; Leite, Cicilia Raquel Maia; Vasconcelos, Claudio Lopes; Soares, Joao Maria

2017-01-01

The ophthalmic dysfunction amblyopia, commonly known as lazy eye, is characterized by decreased vision in one eye due to improper development in childhood. The aim of this study was to obtain and characterize natural rubber membranes and to assess their utility as an eye film capable of altering the passage of light. The latex membranes were produced using the Van Gogh method and the deposition technique and were analyzed by physical and chemical methods to determine the properties of latex in natura and of natural rubber membranes. The materials were characterized by X-ray diffractometry, scanning electron microscopy, thermogravimetry, differential scanning calorimetry, analysis of water sorption and light crossing analysis. We report here a new approach to the treatment of patients with amblyopia using latex membranes. (author)

Effect of rootstock on the scion of Hevea brasiliensis through metabolic analysis of latex samples by 1H NMR

Directory of Open Access Journals (Sweden)

Eduardo Sanches Pereira do Nascimento

2011-01-01

Full Text Available In this study, the effect of rootstock on grafting through metabolomic analysis of latex (Hevea brasiliensis samples was verified by 1H nuclear magnetic resonance (NMR and multivariate data analysis. Sixteen metabolites present in the latex cytosol were characterized by NMR. PCA analysis showed that the latex samples of the RR and GR groups can be differentiated. The GR group samples present a metabolic profile similar to the RR group samples, while the RG group is in an intermediate position between RR and GG groups. Sucrose and formate contributed greatly to the separation obtained by PCA, presenting a good correlation between the results. 1H NMR was an efficient technique to differentiate latex samples from different types of rootstocks and grafting and in the future could be used to predict rubber production by latex analysis.

The Synthesis and Modification of Nanosized Clickable Latex Particles

KAUST Repository

Almahdali, Sarah

2013-01-01

This research aims to add to the current knowledge available for miniemulsion polymerization reactions and to use this knowledge to synthesize multifunctional nanosized latex particles that have the potential to be used in catalysis. The physical

Partial swelling of latex particles by two monomers

NARCIS (Netherlands)

Noel, E.F.J.; Maxwell, I.A.; German, A.L.

1993-01-01

The swelling of polymeric latex particles with solvent and monomer is of great importance for the emulsion polymn. process in regard to compn. drift and rate of polymn. For the monomer combination, Me acrylate-vinyl acetate, both satn. and partial swelling were detd. exptl. Theories for satn.

Latex Imaging by Environmental STEM: Application to the Study of the Surfactant Outcome in Hybrid Alkyd/Acrylate Systems

OpenAIRE

Faucheu , Jenny; Chazeau , Laurent; Gauthier , Catherine; Cavaille , Jean-Yves; Goikoetxea , Monika; Minari , Roque; Asua , Jose M.

2009-01-01

International audience; Among other uses. latexes are a successful alternative to solvent-borne binders for coatings. Efforts are made to produce hybrid nanostructured latexes containing an acrylic phase and an alkyd phase, However, after the film-forming process, the surfactant used to stabilize these latexes remains in the film, and its location can have a drastic effect on the application properties. Among the processing parameters, the alkyd hydrophobicity can strongly influence this loca...

The Second Round of the PHAR-QA Survey of Competences for Pharmacy Practice

Directory of Open Access Journals (Sweden)

Jeffrey Atkinson

2016-09-01

Full Text Available This paper presents the results of the second European Delphi round on the ranking of competences for pharmacy practice and compares these data to those of the first round already published. A comparison of the numbers of respondents, distribution by age group, country of residence, etc., shows that whilst the student population of respondents changed from Round 1 to 2, the populations of the professional groups (community, hospital and industrial pharmacists, pharmacists in other occupations and academics were more stable. Results are given for the consensus of ranking and the scores of ranking of 50 competences for pharmacy practice. This two-stage, large-scale Delphi process harmonized and validated the Quality Assurance in European Pharmacy Education and Training (PHAR-QA framework and ensured the adoption by the pharmacy profession of a framework proposed by the academic pharmacy community. The process of evaluation and validation of ranking of competences by the pharmacy profession is now complete, and the PHAR-QA consortium will now put forward a definitive PHAR-QA framework of competences for pharmacy practice.

The Second Round of the PHAR-QA Survey of Competences for Pharmacy Practice

Science.gov (United States)

Atkinson, Jeffrey; De Paepe, Kristien; Pozo, Antonio Sánchez; Rekkas, Dimitrios; Volmer, Daisy; Hirvonen, Jouni; Bozic, Borut; Skowron, Agnieska; Mircioiu, Constantin; Marcincal, Annie; Koster, Andries; Wilson, Keith; van Schravendijk, Chris

2016-01-01

This paper presents the results of the second European Delphi round on the ranking of competences for pharmacy practice and compares these data to those of the first round already published. A comparison of the numbers of respondents, distribution by age group, country of residence, etc., shows that whilst the student population of respondents changed from Round 1 to 2, the populations of the professional groups (community, hospital and industrial pharmacists, pharmacists in other occupations and academics) were more stable. Results are given for the consensus of ranking and the scores of ranking of 50 competences for pharmacy practice. This two-stage, large-scale Delphi process harmonized and validated the Quality Assurance in European Pharmacy Education and Training (PHAR-QA) framework and ensured the adoption by the pharmacy profession of a framework proposed by the academic pharmacy community. The process of evaluation and validation of ranking of competences by the pharmacy profession is now complete, and the PHAR-QA consortium will now put forward a definitive PHAR-QA framework of competences for pharmacy practice. PMID:28970400

Extractable proteins from field radiation vulcanized natural rubber latex

Energy Technology Data Exchange (ETDEWEB)

Parra, Duclerc F. [Chemical and Environmental Centre, Nuclear Energy Research Institute, Av. Lineu Prestes, 2242-CEP Sao Paulo (Brazil)]. E-mail: dfparra@ipen.br; Pinto Martins, Carlos Felipe [Chemical and Environmental Centre, Nuclear Energy Research Institute, Av. Lineu Prestes, 2242-CEP Sao Paulo (Brazil); Collantes, Hugo D.C. [Chemical and Environmental Centre, Nuclear Energy Research Institute, Av. Lineu Prestes, 2242-CEP Sao Paulo (Brazil); Lugao, Ademar B. [Chemical and Environmental Centre, Nuclear Energy Research Institute, Av. Lineu Prestes, 2242-CEP Sao Paulo (Brazil)

2005-07-01

The type I allergy associated with the use of natural rubber latex (NRL) products is caused by the NRL proteins leached by the sweat or other body fluids. Makuuchi's group proposed for the first time the proteins removal by the addition of water-soluble polymers (WSP) on radiation vulcanization of natural rubber latex (RVNRL) that is a promising process under development in many countries. In this study, Brazilian field natural rubber was irradiated with a {sup 60}Co gamma source to reduce the content of WSP in the final product. WSP was used as additive to improve the extraction of protein. After irradiation the RVNRL was centrifuged to extract the WSP and proteins. The analytical methodology for protein content was based on the modified Lowry method according to ASTM D5712. Protein determination was carried out in serum of latex and in the extracts of the gloves. The concentration of extractable water-soluble proteins in serum of irradiated field NRL (NRL1), not irradiated one (NRL2); of twice centrifuged sample with polymer additive NRL (NRL3) and of the glove manufactured (NRLG) are compared with commercial glove (CG). The irradiation process increases the extractable water-soluble proteins, EP, as reported in the literature. In this study the use of polymeric additive on the bi-centrifugation process to remove protein was successful and the EP of the glove obtained in NRL3 was at around 40% of the commercial glove.

Pilot Scale Production of Irradiated Natural Rubber Latex and its Dipping Products

Directory of Open Access Journals (Sweden)

M. Utama

2005-07-01

Full Text Available One hundred and fifty kg natural rubber latex (NRL before and after concentration were added with 3 phr (part hundred ratio of rubber normal butyl acrylate, then the mixture were irradiated at 25 kGy by gamma rays of 60Co in pilot scale. The irradiated natural rubber latex (INRL were then being to use for producing rubber products such as condom, surgical gloves, and spygmomanometer in factory scale. The quality of INRL and rubber products such as : total solid content (TSC, dry rubber content (DRC, KOH, VFA and MST number, tensile strength, modulus, elongation at break, extractable protein content, and response against Type I allergy etc. were evaluated. The economic aspect for producing INRL by means of Gamma Irradiator (GI and Electron Beam Machine (EBM such as payback period (PP, net present value (NPV and internal rate return (IRR were calculated. The results showed that the latex properties of INRL such as DRC, TSC, KOH, VFA, and MST number are not only found to the requirement of the ISO 2004 standard but also the latex has low protein, lipid, and carbohydrate content. The physical and mechanical properties (tensile strength, modulus, and elongation at break of rubber dipping products such as condom, gloves, and sphygmomanometer are not only found to the requirement of ISO 4074, ISO 10282, and ANSI/AAMI SP-1994 standards, but also the allergic response tested clinical latex-sensitive protein allergen by ELISA test on gloves, and by SPT test on condom are found to be negative. It indicates that production of INRL or PVNRL or RVNRL by EBM 250 keV/10 mA, was more cheap than by using gamma γ irradiator 200 kCi, or sulfur vulcanization. The value of PBP (payback period was 2,1 years, NPV (net present value was 4,250 US $, PI (profitability index 1,06 and IRR (internal rate of returns was 25,0%.

Comparison of biomarkers in serum and induced sputum of patients with occupational asthma and chronic obstructive pulmonary disease.

Science.gov (United States)

Kleniewska, Aneta; Walusiak-Skorupa, Jolanta; Piotrowski, Wojciech; Nowakowska-Świrta, Ewa; Wiszniewska, Marta

2016-07-22

Occupational asthma and chronic obstructive pulmonary disease (COPD) are associated with the airway inflammatory process. The aim of this study was to compare the sputum and serum markers of inflammation in patients with occupational asthma and COPD. The study group included 20 patients with stable COPD, 24 patients with asthma, and 22 healthy subjects. Interleukin (IL)-6, IL-1β, tumor necrosis factor (TNF)-α, matrix metalloproteinase (MMP)-9 levels in serum and induced sputum as well as fibrinogen and CRP in serum were determined in all the subjects. Higher concentrations of IL-1β, IL-6, TNF-α, and MMP-9 in induced sputum and an increased concentration of acute-phase proteins in serum were observed in COPD patients compared with healthy subjects. Higher concentrations of IL-1β and MMP-9 in induced sputum and a higher concentration of C-reactive protein (CRP) were detected in COPD patients than in asthmatic subjects. Never smokers with COPD had significantly higher levels of IL-1β and MMP-9 in induced sputum than never smoker controls. There was no significant difference between the serum and sputum levels of cytokines and MMP-9 of never smokers and smokers with COPD. Higher concentrations of IL-1β and MMP-9 in induced sputum and a higher concentration of CRP in serum allow distinguishing between biomarker profiles of COPD patients and asthmatic patients. Occupational exposure induces a systemic proinflammatory state with increased levels of acute-phase proteins in stable COPD patients. MMP-9 and IL-1β concentrations are increased in induced sputum of never smokers with COPD, which is associated with occupational exposure.

[Analysis on occupational noise-induced hearing loss of different type workers in underground mining].

Science.gov (United States)

Liu, Q C; Duo, C H; Wang, Z; Yan, K; Zhang, J; Xiong, W; Zhu, M

2017-11-20

Objective: To investigate hearing loss status of blasters, drillers mechanics and so on in underground mining, and put forward suggestion diagnosis of occupational explosive deafness and occupational deafness. Methods: Underground excavation workers in a metal mine were recruited in this study, those with a history of ear disease and non-occupational deafness were all excluded. Finally, the features of pure tone audiometry of 459 noise-exposed workers were analyzed. Results: High-frequency hearing loss occurred on 351workers and the positive detection rate was 74.29%, workers who had both high-frequency and linguistic frequency hearing loss were 51 and the positive detection rate was 11.11%. The positive detection of high-frequency hearing loss in right ear (χ(2)=9.427 and P = 0.024) and in left ear (χ(2)=14.375, P =0.002) was significantly different between different exposure age groups. The positive detection of high-frequency hearing loss of driving group was the highest, followed by blasting group, mining group and machine repair group. The characteristics of the hearing loss caused by drilling noise of the blasting workers with no accident occurred were in line with that of noise-induced hearing loss. Conclusion: The diagnosis grading should be carried out according to the diagnostic criteria of occupational noise-induced deafness for the employees who engaged in the blasting operation with no record of blast accident.

Extractable protein content of radiation vulcanized natural rubber latex films

International Nuclear Information System (INIS)

Ma'zam Md Said; Wan Manshol Wan Zin

1996-01-01

The effects of processing conditions on extractable protein content of coagulant dipped radiation vulcanized natural rubber latex films have been investigated. Drying of wet-gel of radiation vulcanized latex films even at a relatively low temperature of 70 degree C resulted in increases of extractable protein content of the films. The extractable protein content is dependent upon both the temperature and time of drying of wet-gel deposit. Wet-gel leaching of film alone is not adequate to reduce the extractable protein content of films to low levels. Combination of wet-gel leaching, post-leaching, a dip in corn starch slurry, followed by drying at a low temperature of 70 degree C reduces the extractable protein content of films to very low levels

[Anaphylactic reaction to latex during spinal anesthesia: a case report].

Science.gov (United States)

Ueda, Narumi; Kitamura, Rie; Wakamori, Takeshi; Nakamura, Kumi; Konishi, Keisuke

2008-05-01

A 46-year-old man, with a history of atopic dermatitis and bronchial asthma, underwent surgery for an inguinal hernia. Forty-three minutes subsequent to spinal anesthesia, the patient complained suddenly of dyspnea with wheezing. Blood pressure decreased and skin eruption was observed on his chest. Postoperative laboratory tests revealed high IgE concentration, and a skin test confirmed an allergy to latex. The patient's allergic reaction was easily overlooked because of his history of bronchial asthma and the possibility that the hypotension was caused by the high spinal anesthesia. Latex allergy should be considered in any suspicious case presenting with these symptoms during surgery. After recovery, a skin test should be used to confirm the allergy to avoid repeated allergic episodes.

Advances in environmental and occupational diseases 2004.

Science.gov (United States)

Frew, Anthony J

2005-06-01

2004 was another good year for publications on environmental and occupational disorders in our journal. The major focus is clearly on the environment and particularly on environmental risk factors for sensitization and asthma. There is a growing consensus that exposure to pets is good, provided there is enough of it. Low levels enhance sensitization, and higher levels protect against the consequences of that sensitization. Following on from previous work on cockroaches, we now see allergy to feral mice as an emergent problem--at least we now have the tools to study this properly. Emphasis seems to be swinging away from the outdoor environment as a cause of allergic disease and toward the indoor environment, which is, after all, where most of us spend most of our lives. New techniques for studying isocyanate allergy might kindle a revival of interest in the mechanisms of occupational asthma caused by low-molecular-weight compounds. But for all types of occupational allergy, prevention remains key, and it is good to see that comprehensive programs of allergen reduction can pay off in reduced rates of latex allergy in health care workers. Further work in the area of recombinant allergens is welcome but needs soon to be translated into new diagnostic and therapeutic strategies. This sector of allergy research remains vibrant, and the editors will continue to welcome outstanding contributions in this area.

Radiation vulcanization of natural rubber latex using 250 keV electron beam machine

Energy Technology Data Exchange (ETDEWEB)

Chirinos, H.; Yoshii, F.; Makuuchi, K.; Lugao, A. E-mail: ablugao@net.ipen.br

2003-08-01

The sensitized radiation vulcanization of natural rubber latex has been carried out with 250 keV electrons. Latex was irradiated over a range of the beam current from 5 to 20 mA in the presence of sensitizers like the n-butyl acrylate (n-BA). The vulcanization dose decreases with increasing beam current condition. The rate of vulcanization (R{sub vul}) depends on the beam current (I) as given by the equation R{sub vul}=kI{sup 0.6}.

Laboratory evaluation of a simple and rapid latex agglutination assay for the serodiagnosis of typhoid fever

NARCIS (Netherlands)

Abdoel, Theresia H.; Pastoor, Rob; Smits, Henk L.; Hatta, Mochammad

2007-01-01

A latex agglutination assay for the serodiagnosis of typhoid fever was evaluated on samples collected from patients with clinical suspicion of typhoid fever in South Sulawesi, Indonesia, where the disease is endemic. The latex assay is very easy to use, gives a rapid result and may be used as a

Specificity of herbivore-induced hormonal signaling and defensive traits in five closely related milkweeds (Asclepias spp.).

Science.gov (United States)

Agrawal, Anurag A; Hastings, Amy P; Patrick, Eamonn T; Knight, Anna C

2014-07-01

Despite the recognition that phytohormonal signaling mediates induced responses to herbivory, we still have little understanding of how such signaling varies among closely related species and may generate herbivore-specific induced responses. We studied closely related milkweeds (Asclepias) to link: 1) plant damage by two specialist chewing herbivores (milkweed leaf beetles Labidomera clivicolis and monarch caterpillars Danaus plexippus); 2) production of the phytohormones jasmonic acid (JA), salicylic acid (SA), and abscisic acid (ABA); 3) induction of defensive cardenolides and latex; and 4) impacts on Danaus caterpillars. We first show that A. syriaca exhibits induced resistance following monarch herbivory (i.e., reduced monarch growth on previously damaged plants), while the defensively dissimilar A. tuberosa does not. We next worked with a broader group of five Asclepias, including these two species, that are highly divergent in defensive traits yet from the same clade. Three of the five species showed herbivore-induced changes in cardenolides, while induced latex was found in four species. Among the phytohormones, JA and ABA showed specific responses (although they generally increased) to insect species and among the plant species. In contrast, SA responses were consistent among plant and herbivore species, showing a decline following herbivore attack. Jasmonic acid showed a positive quantitative relationship only with latex, and this was strongest in plants damaged by D. plexippus. Although phytohormones showed qualitative tradeoffs (i.e., treatments that enhanced JA reduced SA), the few significant individual plant-level correlations among hormones were positive, and these were strongest between JA and ABA in monarch damaged plants. We conclude that: 1) latex exudation is positively associated with endogenous JA levels, even among low-latex species; 2) correlations among milkweed hormones are generally positive, although herbivore damage induces a

Low field NMR study of the latex derived from Brosimum parinarioides - Moraceae

International Nuclear Information System (INIS)

Miguez, Eduardo; Tavares, Maria Ines B.

2009-01-01

Brosimum parinarioides is a tree found in the Amazonia forest and its latex (Leite de Amapa) is often used like food and by the popular medicine in the treatment of tuberculosis and asthma. Being swallowed in nature, its necessary determinate the stability degree of this latex in the storage conditions in which is used in Amazonia. The analyses of T 2 data showed that the limit of stability is not longer than six month in the storage conditions used by the population of Amazonia. The Low field NMR proved to be an efficient method for this kind of study. (author)

Papain-induced occupational rhinoconjunctivitis and asthma – A case report

OpenAIRE

Tymoszuk, Diana; Wiszniewska, Marta; Walusiak-Skorupa, Jolanta

2016-01-01

This report presents a case of occupational asthma, rhinitis and conjunctivitis to papain in a 50-year-old herbs and spices packer, with documented increased eosinophilia in induced sputum and in the nasal lavage fluids after a specific inhalation challenge test (SICT) and specific nasal challenge test (SNCT) with this enzyme. Immunoglobulin E-mediated (IgE) sensitization to papain was confirmed by positive results of a skin prick test with specific solution. Specific inhalation and nasal cha...

Isolation rubber latex binary composites consisting of cotton and poly-N, N-dimethyl-N, N-diallilammony chloride

Directory of Open Access Journals (Sweden)

J. Cornejo Tueros

2012-01-01

Full Text Available The paper discusses the application of rubber from latex binary coagulating agent consisting of cotton - textile waste and polymeric quaternary ammonium salts. The influence on the process of extracting rubber from latex flow coagulating agent temsperatury and concentration of the dispersed phase.

Occupational skin disease among Australian healthcare workers: a retrospective analysis from an occupational dermatology clinic, 1993-2014.

Science.gov (United States)

Higgins, Claire L; Palmer, Amanda M; Cahill, Jennifer L; Nixon, Rosemary L

2016-10-01

Healthcare workers (HCWs) are at risk of developing occupational skin disease (OSD). To ascertain the causes of OSD in Australian HCWs in a tertiary referral clinic. A retrospective review was performed of patients assessed at the Occupational Dermatology Clinic in Melbourne from 1993 to 2014. Of 685 HCWs assessed in the clinic over a period of 22 years, 555 (81.0%) were diagnosed with OSD. The most common diagnosis was irritant contact dermatitis (ICD) (79.1%), followed by allergic contact dermatitis (ACD) (49.7%). Natural rubber latex allergy was also relatively frequent (13.0%). The major substances causing ACD were rubber glove chemicals (thiuram mix and tetraethylthiuram disulfide), preservatives (formaldehyde, formaldehyde releasers, and isothiazolinones), excipients in hand cleansers, which are hard-to-avoid weak allergens, and antiseptics. ACD caused by commercial hand cleansers occurred more frequently than ACD caused by alcohol-based hand rubs (ABHRs). Occupational ICD was mostly caused by water/wet work and hand cleansers, and environmental irritants such as heat and sweating. Understanding the causes of OSD in HCWs is important in order to develop strategies for prevention. We suggest that skin care advice should be incorporated into hand hygiene education. The use of ABHRs should be encouraged, weak allergens in skin cleansers should be substituted, and accelerator-free gloves should be recommended for HCWs with OSD. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effect of cellulose nanocrystals from corn cob with dispersion agent polyvinyl pyrrolidone in natural rubber latex film after aging treatment

Science.gov (United States)

Harahap, H.; Ridha, M.; Halimatuddahliana; Taslim; Iriany

2018-02-01

This study about the resistance of natural rubber latex films using nanocrystals cellulose filler from corn cob waste by aging treatment. Corn cob used as organic filler composed of cellulose, hemicellulose, and lignin. Each component has a potential for reuse, such as cellulose. Cellulose from corn cob has potential application as a filler prepared by hydrolysis process using a strong acid. The producing of natural rubber latex films through coagulant dowsing process. This research started with the pre-vulcanization process of natural rubber latex at 70 °C and followed by process of vulcanization at 110 °C for 20 minutes. Natural rubber latex films that have been produced continued with the aging treatment at 70 °C for 168 hours. The mechanical properties of natural rubber latex films after aging treatment are the tensile strength, elongation at break, M100 and M300 have performed.

EFFECT OF THE PHASE STRUCTURE EVOLUTION ON THE PROPERTIES OF FILMS FORMED FROM PBA/P(ST-CO-MMA)COMPOSITE LATEX

Institute of Scientific and Technical Information of China (English)

无

2008-01-01

A group of heterogeneous latexes poly(butyl acrylate)/poly(styrene-co-methyl methacrylate)(PBA/P(St-co-MMA))were prepared by a semi-continuous seeded emulsion polymerization process under monomer starved conditions.The glass transition temperature(Tg)and the mechanical properties of the film formed from the composite latex changed with the evolution of the particle morphology.A photon transmission method was used to monitor the phase structure evolution of films which were prepared from core-shell PBA/P(St-co-MMA)latex at room temperature and annealed at 383 K above Tg of the polymers.In addition,the changes of the surface of the film formed from the composite latex with time at 383 K were observed by AFM.The evidence illustrated that the film formed from the core-shell latex particles was metastable.The rearrangement of the phases could occur under proper conditions.

Nitrogen removal from concentrated latex wastewater by land treatment

Directory of Open Access Journals (Sweden)

Vikanda Thongnuekhang

2004-05-01

Full Text Available Most of the concentrated latex factories in the South of Thailand discharge treated wastewater that contains high level of nitrogen to a nearby river or canals leading to a water pollution problem. A study of land treatment system was conducted to treat and utilize nitrogen in treated wastewater from the concentrated latex factory. The experimental pilot-scale land treatment system was constructed at the Faculty of Engineering, Prince of Songkla University, Hat Yai Campus. It consisted of water convolvulus (Ipomea aquatica, I. Reptans, tropical carpet grass (Axonopus compresus (Swartz Beav. and control unit (no plantation. The treated wastewater from the stabilization pond system of the selected concentrated latex factoryin Songkhla was used to irrigate each experimental unit. Influent and effluent from the experimental units were analyzed for TKN, NH3-N, Org-N, NO3 --N, NO2 --N, BOD5, sulfate, pH and EC. The land treatment system resulted a high removal efficiency for nitrogen. Tropical carpet grass provided higher removal efficiency than other units for all parameters. The removal efficiency of water convolvulus and control unit were not significantly different. The average removal efficiency of TKN, NH3-N, Org-N, BOD5 and sulfate for tropical carpet grass unit were 92, 97, 61, 88 and 52%, for water convolvulus unit were 75, 80, 43, 41 and 30%, and for control unit were 74, 80, 41, 31 and 28%, respectively. Mass balance of nitrogen transformation was conducted. It revealed that plant uptake was the major mechanism for nitrogen removal in land treatment.

Characteristics of Red Algae Bioplastics/Latex Blends under Tension

Directory of Open Access Journals (Sweden)

M. Nizar Machmud

2013-10-01

Full Text Available Cassava, corn, sago and the other food crops have been commonly used as raw materials to produce green plastics. However, plastics produced from such crops cannot be tailored to fit a particular requirement due to their poor water resistance and mechanical properties. Nowadays, researchers are hence looking to get alternative raw materials from the other sustainable resources to produce plastics. Their recent published studies have reported that marine red algae, that has been already widely used as a raw material for producing biofuels, is one of the potential algae crops that can be turned into plastics. In this work, Eucheuma Cottonii, that is one of the red alga crops, was used as raw material to produce plastics by using a filtration technique. Selected latex of Artocarpus altilis and Calostropis gigantea was separately then blended with bioplastics derived from the red algae, to replace use of glycerol as plasticizer. Role of the glycerol and the selected latex on physical and mechanical properties of the red algae bioplastics obtained under a tensile test performed at room temperature are discussed. Tensile strength of some starch-based plastics collected from some recent references is also presented in this paperDoi: 10.12777/ijse.5.2.81-88 [How to cite this article: Machmud, M.N., Fahmi, R.,  Abdullah, R., and Kokarkin, C.  (2013. Characteristics of Red Algae Bioplastics/Latex Blends under Tension. International Journal of Science and Engineering, 5(2,81-88. Doi: 10.12777/ijse.5.2.81-88

Occupational skin cancer may be underreported

DEFF Research Database (Denmark)

Carøe, Tanja Korfitsen; Ebbehøj, Niels Erik; Wulf, Hans Christian

2013-01-01

Skin cancer may, in some cases, be caused by occupational exposures. The aim of this study was to investigate the prevalence of and exposures leading to occupationally induced skin cancers in Denmark during a ten-year period.......Skin cancer may, in some cases, be caused by occupational exposures. The aim of this study was to investigate the prevalence of and exposures leading to occupationally induced skin cancers in Denmark during a ten-year period....

Syndrome of round shadow

International Nuclear Information System (INIS)

Ginzburg, M.A.; Kinoshenko, Yu.T.

1987-01-01

Syndrome of round shadow is a traditional determination for a group of spherical, ovoid and similar volumetric formations of more than 1 cm. Differential roentgenodiagnosis of most typical diseases presented by a round shadow as well as dynamics of X-ray pattern of some round formations are presented. Radiological signs of the lung formations and similar ones in diaphragm and mediastinum thoracic wall are given. Ethiology, pathogenesis and pathomorphology of round formations, their clinical picture and investigation methods are discussed

Tensile properties of latex paint films with TiO2 pigment

Science.gov (United States)

Hagan, Eric W. S.; Charalambides, Maria N.; Young, Christina T.; Learner, Thomas J. S.; Hackney, Stephen

2009-05-01

The tensile properties of latex paint films containing TiO2 pigment were studied with respect to temperature, strain-rate and moisture content. The purpose of performing these experiments was to assist museums in defining safe conditions for modern paintings held in collections. The glass transition temperature of latex paint binders is in close proximity to ambient temperature, resulting in high strain-rate dependence in typical exposure environments. Time dependence of modulus and failure strain is discussed in the context of time-temperature superposition, which was used to extend the experimental time scale. Nonlinear viscoelastic material models are also presented, which incorporate a Prony series with the Ogden or Neo-Hookean hyperelastic function for different TiO2 concentrations.

LaTeX - Know what you are missing

Directory of Open Access Journals (Sweden)

Gunther Maier

2016-11-01

Full Text Available This article gives a brief introduction to \\LaTeX\\ and related tools. The aim is to give an overview, to demonstrate the flexibility and versatility of the software, and to assist the reader taking first steps using it. The article links to a number of valuable resources for further information.

Radiation vulcanization of natural rubber latex

International Nuclear Information System (INIS)

Wan Manshol bin Wan Zin; Norjanah binti Mohid

1994-01-01

This paper describes the experimental techniques and the results of radiation vulcanization of natural rubber latex carried out on several high ammonia latices available in the country. The efficiency of various sensitisers and stabilisers used were evaluated in terms of the gamma radiation dose required to produce the maximum tensile strengths. The extent of crosslinking of RVNRL sample films were estimated by equilibrium swelling ratio measurements. The stability of pre-irradiated and post-irradiated samples were monitored using viscosity measurements as the parameter

Marine bacterial prodigiosin as dye for rubber latex, polymethyl ...

African Journals Online (AJOL)

Prodigiosin is known for its immunomodulatory, antibacterial, antimycotic, antimalarial, algicidal and anticancer activities. Here, we reported the evaluation of prodigiosin pigment as a dyeing agent in rubber latex, paper and polymethyl methacrylate (PMMA) so that it can be considered as an alternative to synthetic pigments.

Assessment of adverse reactions to latex gloves use among nurses ...

African Journals Online (AJOL)

... to latex is a common problem among nurses and other health care workers. ... There was significant association between family history and occurrence of ... These effects may vary in severity from skin problems to anaphylactic shock.

Detection of latex allergens by immunoelectron microscopy in ambient air (PM10) in Oslo, Norway (1997-2003).

Science.gov (United States)

Namork, Ellen; Kurup, Viswanath P; Aasvang, Gunn Marit; Johansen, Bjørn V

2004-11-01

The authors collected ambient air along two highways in Oslo to investigate the annual variations in particulate matter (PM10) and the presence of latex as an outdoor allergen. PMI, was monitored for a period of five years, during which time the use of studded winter tires was reduced. The presence of latex and of common aeroallergens was examined directly on the collection filters with immunoelectron microscopy visualized in a scanning electron microscope. The annual variation in PM10 was similar over the five years of sampling, with increased mass concentrations in winter. Statistical analysis indicated no major effect from the change to nonstudded tires. The most important factors influencing the PM10 concentration were meteorological parameters like wind and rain. Immnunolabeling of the filters showed latex as an outdoor allergen that adhered to carbon aggregates from vehicle emission. The results also indicated cross-reactive epitopes among the common allergens investigated, which for sensitized subjects may add to the risk of developing latex allergy.

Formation of Defect-Free Latex Films on Porous Fiber Supports

KAUST Repository

Lively, Ryan P.; Mysona, Joshua A.; Chance, Ronald R.; Koros, William J.

2011-01-01

a defect-free lumen-side barrier layer can be created. Film experiments examined the effect of drying rate, latex age, substrate porosity (porous vs nonporous), and substrate hydrophobicity/ hydrophilicity. Film studies show that in ideal conditions

The construction and commissioning of MINT's latex irradiator

International Nuclear Information System (INIS)

Razali Hamzah; Muhd Khairi Muhd Said; Muhd Ariff Hamzah; Wan Manshol Wan Zin; Taiman Kadni

1996-01-01

The construction and installation of MINT's automatic continuous latex irradiator is described. MINT cooperated with NUKEM to design the plant. Construction was done by local building consultants and local contractor. The installation of the plant includes local fabrication components and imported components. The plant is automatically controlled by a computer system. Features of plant is described

Mechanical and Permeability Characteristics of Latex-Modified Pre-Packed Pavement Repair Concrete as a Function of the Rapid-Set Binder Content

Directory of Open Access Journals (Sweden)

Jae-Woong Han

2015-10-01

Full Text Available We evaluated the strength and durability characteristics of latex-polymer-modified, pre-packed pavement repair concrete (LMPPRC with a rapid-set binder. The rapid-set binder was a mixture of rapid-set cement and silica sand, where the fluidity was controlled using a latex polymer. The resulting mix exhibited a compressive strength of ¥21 MPa and a flexural strength of ¥3.5 MPa after 4 h of curing (i.e., the traffic opening term for emergency repairs of pavement. The ratio of latex polymer to rapid-set binder material was varied through 0.40, 0.33, 0.29, and 0.25. Mechanical characterization revealed that the mechanical performance, permeability, and impact resistance increased as the ratio of latex polymer to rapid-set binder decreased. The mixture exhibited a compressive strength of ¥21 MPa after 4 h when the ratio of latex polymer to rapid-set binder material was ¤0.29. The mixture exhibited a flexural strength of ¥3.5 MPa after 4 h when the ratio of latex polymer to rapid-set binder material was ¤0.33. The permeability resistance to chloride ions satisfied 2000 C after 7 days of curing for all ratios. The ratio of latex polymer to rapid-set binder material that satisfied all conditions for emergency pavement repair was ¤0.29.

Study of glucoamylase immobilization in butadiene nitrile latex membrane

International Nuclear Information System (INIS)

Miller, E.

1992-01-01

Attempts have been undetaken to immobilize glucoamylaze by means of butadiene nitrile latex in the presence of a chemical initiator and 60 Co γ-radiation. The activity, stability of conjugates in the membrane and permeability of oxygen in these membranes were determined. (author) 14 refs.; 5 figs

Prevalence and clinical impact of sensitization to latex and fruits in dentistry students at the University of Antioquia, and its relationship with allergy to fruits

Directory of Open Access Journals (Sweden)

Echenique Manrique, Alejandro

2015-04-01

Full Text Available Objective: To determine the prevalence and clinical impact of sensitization to latex and to five tropical fruits (banana, avocado, kiwi, pineapple and passion fruit in dentistry students. Methods: Analytical cross-sectional study of 128 dentistry students at University of Antioquia in Medellín, Colombia. Information was collected by means of a questionnaire and skin prick tests with latex and fruits were done. Results: All students reported having had contact with latex. Nine of them informed at least one episode of adverse reaction to contact with latex without proof of sensitization to it. Five reported at least one reaction with one of the fruits, but skin prick tests were negative. Four of the 14 students who reported gastrointestinal symptoms were sensitized to latex or to one of the tested fruits. Overall, latex sensitization rate was 3.1%. Conclusion: This percentage of sensitization to latex is lower than that in other studies; this may be due to the expression of immune mechanisms other than IgE mediation. We failed to demonstrate a higher sensitization rate to latex as students advanced in their career. The association between gastrointestinal symptoms and sensitization to both fruit and latex is to be emphasized.

Cost evaluation of radiation vulcanization of natural rubber latex

International Nuclear Information System (INIS)

Makuuchi, K.

2003-01-01

Cost of radiation vulcanized NR latex was evaluated. The plant would be built in an existing dipping factory in an industrial area in a Southeast Asian country. One thousands dry tons of NR latex are vulcanized with a low energy electron accelerator. The electron accelerator is a self-shielding low energy type. The maximum accelerating voltage is 300 kV and the output power is 10 kW. The total construction cost of the plant is $400,000 including electron accelerator and other equipments. Costs of raw materials and utilities are $1.165 and $0.023 per one kg of product, respectively. The fixed costs of the plant consist of labor costs, labor overhead, maintenance, plant overhead, depreciation, and bank interest. It is $0.190/kg of product. The company overhead for operation including company management, R and D and insurance is $0.044/kg of product. Thus, the total production cost is estimated to be $1.422/kg of product. (author)

Alveolar macrophages have a dual role in a rat model for trimellitic anhydride-induced occupational asthma

International Nuclear Information System (INIS)

Valstar, Dingena L.; Schijf, Marcel A.; Nijkamp, Frans P.; Storm, Gert; Arts, Josje H.E.; Kuper, C. Frieke; Bloksma, Nanne; Henricks, Paul A.J.

2006-01-01

Occupational exposure to low molecular weight chemicals, like trimellitic anhydride (TMA), can result in occupational asthma. Alveolar macrophages (AMs) are among the first cells to encounter inhaled compounds. These cells can produce many different mediators that have a putative role in asthma. In this study, we examined the role of AMs in lung function and airway inflammation of rats exposed to TMA. Female Brown Norway rats were sensitized by dermal application of TMA or received vehicle alone on days 0 and 7. One day before challenge, rats received intratracheally either empty or clodronate-containing liposomes to deplete the lungs of AMs. On day 21, all rats were challenged by inhalation of TMA in air. Lung function parameters were measured before, during, within 1 h after, and 24 h after challenge. IgE levels and parameters of inflammation and tissue damage were assessed 24 h after challenge. Sensitization with TMA led to decreased lung function parameters during and within 1 h after challenge as compared to non-sensitized rats. AM depletion alleviated the TMA-induced drop in lung function parameters and induced a faster recovery compared to sham-depleted TMA-sensitized rats. It also decreased the levels of serum IgE 24 h after challenge, but did not affect the sensitization-dependent increase in lung lavage fluid IL-6 and tissue TNF-α levels. In contrast, AM depletion augmented the TMA-induced tissue damage and inflammation 24 h after challenge. AMs seem to have a dual role in this model for TMA-induced occupational asthma since they potentiate the immediate TMA-induced decrease in lung function but tended to dampen the TMA-induced inflammatory reaction 24 h later

Pediatric Round Pneumonia

OpenAIRE

Liu, Yen-Lin; Wu, Ping-Sheng; Tsai, Li-Ping; Tsai, Wen-Hsin

2014-01-01

“Round pneumonia” or “spherical pneumonia” is a well-characterized clinical entity that seems to be less addressed by pediatricians in Taiwan. We herein report the case of a 7-year-old boy who presented with prolonged fever, cough, and chest X-rays showing a well-demarcated round mass measuring 5.9 × 5.6 × 4.3 cm in the left lower lung field, findings which were typical for round pneumonia. The urinary pneumococcal antigen test was positive, and serum anti-Mycoplasma pneumoniae antibody titer...

Mechanical and morphological properties of kenaf powder filled natural rubber latex foam

Energy Technology Data Exchange (ETDEWEB)

Karim, Ahmad Fikri Abdul, E-mail: a.fikri-89@yahoo.com; Ariff, Zulkifli Mohamad [School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Pulau Pinang (Malaysia); Ismail, Hanafi [Cluster for Polymer Composites (CPC), Science and Engineering Research Centre, Engineering Campus, Universiti Sains Malaysia,14300 Nibong Tebal, Pulau Pinang (Malaysia)

2015-07-22

This research is carried out by incorporate kenaf powder with natural rubber latex (NRL) compound and is foamed to make natural rubber latex foam (NRLF) by using a well known technique called Dunlop method. Different loading of kenaf powder was added to NRL compound and was foamed to make NRLF. The tensile properties, and morphology of kenaf filled NRLF was studied. Increase in kenaf loading reduced the tensile strength and elongation at break and of a compound. Modulus at 100% elongation of the compound increased with increased in filler loading. The morphological and micro structural characterization has been performed by using scanning electron microscopy (SEM)

Mechanical and morphological properties of kenaf powder filled natural rubber latex foam

International Nuclear Information System (INIS)

Karim, Ahmad Fikri Abdul; Ariff, Zulkifli Mohamad; Ismail, Hanafi

2015-01-01

This research is carried out by incorporate kenaf powder with natural rubber latex (NRL) compound and is foamed to make natural rubber latex foam (NRLF) by using a well known technique called Dunlop method. Different loading of kenaf powder was added to NRL compound and was foamed to make NRLF. The tensile properties, and morphology of kenaf filled NRLF was studied. Increase in kenaf loading reduced the tensile strength and elongation at break and of a compound. Modulus at 100% elongation of the compound increased with increased in filler loading. The morphological and micro structural characterization has been performed by using scanning electron microscopy (SEM)

A LaTeX graphics routine for drawing Feynman diagrams

International Nuclear Information System (INIS)

Levine, M.J.S.

1990-01-01

FEYNMAN is a LaTeX macropackage which allows the user to construct a versatile range of Feynman diagrams within the text of a document. Diagrams of publication quality may be drawn with relative ease and rapidity. (orig.)

Oil-Acrylic hybrid latexes as binders for waterborne coatings

NARCIS (Netherlands)

Hamersveld, E.M.S.; Es, van J.J.G.S.; German, A.L.; Cuperus, F.P.; Weissenborn, P.; Hellgren, A.C.

1999-01-01

The combination of the characteristics of oil, or alkyd, emulsions and acrylic latexes in a waterborne binder has been the object of various studies in the past. Strategies for combining the positive properties of alkyds, e.g. autoxidative curing, gloss and penetration in wood, with the fast drying

Oil-acrylic hybrid latexes as binders for waterborne coatings

NARCIS (Netherlands)

Hamersveld, van E.M.S.; Es, van J.; German, A.L.; Cuperus, F.P.; Weissenborn, P.; Hellgren, A.C.

1999-01-01

The combination of the characteristics of oil, or alkyd, emulsions and acrylic latexes in a waterborne binder has been the object of various studies in the past. Strategies for combining the positive properties of alkyds, e.g. autoxidative curing, gloss and penetration in wood, with the fast drying

Latex allergy in an infant with acquired hydrocephalus | Ehiozw ...

African Journals Online (AJOL)

We report the case of a 3 month old male infant with acquired hydrocephalus undergoing ventriculo-peritoneal shunt insertion who developed wheals and suffered a respiratory arrest following contact with latex gloves. The need for anaesthetists to effectively diagnose and properly manage this rare clinical entity is ...

How river rocks round: resolving the shape-size paradox.

Directory of Open Access Journals (Sweden)

Gabor Domokos

Full Text Available River-bed sediments display two universal downstream trends: fining, in which particle size decreases; and rounding, where pebble shapes evolve toward ellipsoids. Rounding is known to result from transport-induced abrasion; however many researchers argue that the contribution of abrasion to downstream fining is negligible. This presents a paradox: downstream shape change indicates substantial abrasion, while size change apparently rules it out. Here we use laboratory experiments and numerical modeling to show quantitatively that pebble abrasion is a curvature-driven flow problem. As a consequence, abrasion occurs in two well-separated phases: first, pebble edges rapidly round without any change in axis dimensions until the shape becomes entirely convex; and second, axis dimensions are then slowly reduced while the particle remains convex. Explicit study of pebble shape evolution helps resolve the shape-size paradox by reconciling discrepancies between laboratory and field studies, and enhances our ability to decipher the transport history of a river rock.

Surfactant and counter-ion distribution in styrene-butyl acrylate-acrylic acid dry latex submonolayers

Directory of Open Access Journals (Sweden)

Keslarek Amauri José

2004-01-01

Full Text Available Styrene-butyl acrylate-acrylic acid latex submonolayers prepared using a non-reactive phosphate surfactant together with a reactive sulfonate surfactant were examined in a transmission microscope using electron energy loss spectroscopy imaging (ESI-TEM. Phosphorus is nearly absent from the particles core but it is detected in a thick shell and in unusual, strongly scattering structures with a low carbon content, and largely made out of inorganic phosphate. P is also dispersed outside the particles, while S is uniformly distributed within then. The Na and N elemental maps show that the respective monovalent ions (Na+ and NH4+ have different distributions, in the latex: Na signal within the particles is stronger than in the background, while N is accumulated at the particle borders. The distributions of surfactant and counter-ions are thus different from some current assumptions, but they support recent results on the distribution of ionic constituents in latex films, by scanning electric potential microscopy.

Extraction and comparison of proteins from natural rubber latex by conventional and ionizing radiation methods

International Nuclear Information System (INIS)

Rogero, Sizue O.; Spencer, Patrick J.; Campos, Vania E.; Lusvarghi, Fabio M.; Higa, Olga Z.

1997-01-01

Several proteins in natural rubber latex (NRL) have been assigned to be significant allergens. It is known that proteins submitted to ionizing radiation suffer denaturation and immunochemical modification resulting in low antigenic reactivity. The aim of this study was to extract and compare water extractable proteins from NRL films vulcanized by conventional and by ionizing radiation methods. SDS-polyacrylamide gel electrophoresis (SDS--PAGE) and high pressure liquid chromatography (HPLC) showed a diffuse protein band of about 14 KDa, which we believe is rubber elongation factor (REF), in both eluates, but smaller in latex film vulcanized by ionizing radiation. REF has been suggested to be a major latex allergen. These data suggest that ionizing radiation vulcanization could be an useful method for the production of NRL goods with low antigenicity. (author). 8 refs., 2 figs., 1 tab

Occupational tumors of the thorax

International Nuclear Information System (INIS)

Kraus, T.; Mueller-Lux, A.

2004-01-01

It is estimated that about 4% of cancer mortality is attributed to occupational risk factors. Due to long latency periods it is often difficult to establish causal relationships. Thoracal cancer accounts for about 88% of all compensated occupational cancers in Germany. Most important exposures and diseases are asbestos-related lung cancer, asbestos-related malignant mesothelioma and radiation induced lung cancer (by Radon and its decay products). Lung cancer caused by nickel compounds, hexavalent chromium, arsenic and its compounds, coke oven gases and polycyclic aromatic hydrocarbons are rare. Silica-dust induced lung cancer can be compensated as occupational disease if a silicosis is present. In Germany every physician is obliged to notify a suspected occupational cancer as well as other occupational diseases. (orig.) [de

The polymerization of aniline in polystyrene latex particles

Czech Academy of Sciences Publication Activity Database

Blinova, Natalia V.; Reynaud, S.; Roby, F.; Trchová, Miroslava; Stejskal, Jaroslav

2010-01-01

Roč. 160, 15/16 (2010), s. 1598-1602 ISSN 0379-6779 R&D Projects: GA AV ČR IAA400500905; GA ČR GA203/08/0686; GA ČR GA202/09/1626 Institutional research plan: CEZ:AV0Z40500505 Keywords : polyaniline * polystyrene latex * polyaniline-polystyrene composite Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.871, year: 2010

Acetylcholinesterase Inhibitory and Antioxidant Properties of Euphorbiacharacias Latex

Directory of Open Access Journals (Sweden)

Francesca Pintus

2013-03-01

Full Text Available The aim of the present study was to evaluate the acetylcholinesterase inhibitory capacity and the antioxidant properties of extracts of Euphorbia characias latex, a Mediterranean shrub. We performed a new extraction method involving the use of the trichloroacetic acid. The extract showed high antioxidant activity, was rich in total polyphenolic and flavonoid content and exhibited substantial inhibition of acetylcholinesterase activity.

Pharmacokinetic-pharmacodynamic analysis of antipsychotics-induced extrapyramidal symptoms based on receptor occupancy theory incorporating endogenous dopamine release.

Science.gov (United States)

Matsui-Sakata, Akiko; Ohtani, Hisakazu; Sawada, Yasufumi

2005-06-01

We aimed to analyze the risks of extrapyramidal symptoms (EPS) induced by typical and atypical antipsychotic drugs using a common pharmacokinetic-pharmacodynamic (PK-PD) model based on the receptor occupancy. We collected the data for EPS induced by atypical antipsychotics, risperidone, olanzapine and quetiapine, and a typical antipsychotic, haloperidol from literature and analyzed the following five indices of EPS, the ratio of patients obliged to take anticholinergic medication, the occurrence rates of plural extrapyramidal symptoms (more than one of tremor, dystonia, hypokinesia, akathisia, extrapyramidal syndrome, etc.), parkinsonism, akathisia, and extrapyramidal syndrome. We tested two models, i.e., a model incorporating endogenous dopamine release owing to 5-HT2A receptor inhibition and a model not considering the endogenous dopamine release, and used them to examine the relationship between the D2 receptor occupancy of endogenous dopamine and the extent of drug-induced EPS. The model incorporating endogenous dopamine release better described the relationship between the mean D2 receptor occupancy of endogenous dopamine and the extent of EPS than the other model, as assessed by the final sum of squares of residuals (final SS) and Akaike's Information Criteria (AIC). Furthermore, the former model could appropriately predict the risks of EPS induced by two other atypical antipsychotics, clozapine and ziprasidone, which were not incorporated into the model development. The developed model incorporating endogenous dopamine release owing to 5-HT2A receptor inhibition may be useful for the prediction of antipsychotics-induced EPS.

Falls risk and hospitalization among retired workers with occupational noise-induced hearing loss.

Science.gov (United States)

Girard, Serge André; Leroux, Tony; Verreault, René; Courteau, Marilène; Picard, Michel; Turcotte, Fernand; Baril, Julie

2014-03-01

This study sought to ascertain whether occupational noise-induced hearing loss (NIHL) increased the risk of falls requiring hospitalization among retired workers. The study population consisted of males (age ≥ 65) with an average occupational noise exposure of 30.6 years and whose mean bilateral hearing loss was 42.2 dB HL at 3, 4, and 6 kHz. Seventy-two retired workers admitted to hospitals after a fall were matched with 216 controls from the same industrial sectors. Conditional logistic regression models were used to estimate the risk (odds ratio; [OR]) of falls leading to hospitalization by NIHL categories. Results showed a relationship between severe NIHL (≥ 52.5 dB HL) and the occurrence of a fall (OR: 1.97, CI95%: 1.001-3.876). Reducing falls among seniors fosters the maintenance of their autonomy. There is a definite need to acquire knowledge about harmful effects of occupational noise to support the prevention of NIHL and ensure healthier workplaces.

Antimicrobial activity of a 48-kDa protease (AMP48) from Artocarpus heterophyllus latex.

Science.gov (United States)

Siritapetawee, J; Thammasirirak, S; Samosornsuk, W

2012-01-01

Artocarpus heterophyllus (jackfruit) is a latex producing plant. Plant latex is produced from secretory cells and contains many intergradients. It also has been used in folk medicine. This study aimed to purify and characterize the biological activities of a protease from jackfruit latex. A protease was isolated and purified from crude latex of a jackfruit tree by acid precipitation and ion exchange chromatography. The proteolytic activities of protein were tested using gelatin- and casein-zymography. The molecular weight and isoelectric point (pl) of protein were analysed by SDS/12.5% PAGE and 2D-PAGE, respectively. Antimicrobial activity of protein was analysed by broth microdilution method. In addition, the antibacterial activity of protein against Pseudomonas aeruginosa ATCC 27853 was observed and measured using atomic force microscopy (AFM) technique. The purified protein contained protease activity by digesting gelatin- and casein-substrates. The protease was designated as antimicrobial protease-48 kDa or AMP48 due to its molecular mass on SDS-PAGE was approximately 48 kDa. The isoelectric point (pl) of AMP48 was approximately 4.2. In addition, AMP48 contained antimicrobial activities by it could inhibit the growths of Pseudomonas aeruginosa ATCC 27853 and clinical isolated Candida albicans at minimum inhibitory concentration (MIC) 2.2 mg/ml and Minimum microbicidal concentration (MMC) 8.8 mg/ml. AFM image also supported the antimicrobial activities of AMP48 by the treated bacterial morphology and size were altered from normal.

Trialed production of low protein irradiated natural rubber latex in factory scale by gamma irradiation technique

International Nuclear Information System (INIS)

Utama, Marga; Herwinarni, S.; Halik, H.M.; Siswanto; Suharyanto; Syamsu, Y.; Handoko, B.

2006-01-01

Four tons fresh field natural rubber latex (FNRL) with total solid content 30% were added with 2 phr (part hundred ratio of rubber) normal butyl acrylate (nBA) then irradiated by gamma rays at 25 kGy. The irradiated FNRL was centrifuged, then the properties of irradiated centrifuged natural rubber latex (INRL) and its film were measured before and after storage for 5 months. It is found that the INRL is stable latex during storage in 5 months, with lowest protein, and free nitrosamine content. The tensile strength of INRL film was 24-27 MPa, and modulus 600% was 1,5-2,0 MPa, elongation at break was 900%, and hardness was 27-29 Shore A, while the extractable protein content less than 100 μg/g. (author)

Whole-transcriptome survey of the putative ATP-binding cassette (ABC) transporter family genes in the latex-producing laticifers of Hevea brasiliensis.

Science.gov (United States)

Zhiyi, Nie; Guijuan, Kang; Yu, Li; Longjun, Dai; Rizhong, Zeng

2015-01-01

The ATP-binding cassette (ABC) proteins or transporters constitute a large protein family in plants and are involved in many different cellular functions and processes, including solute transportation, channel regulation and molecular switches, etc. Through transcriptome sequencing, a transcriptome-wide survey and expression analysis of the ABC protein genes were carried out using the laticiferous latex from Hevea brasiliensis (rubber tree). A total of 46 putative ABC family proteins were identified in the H. brasiliensis latex. These consisted of 12 'full-size', 21 'half-size' and 13 other putative ABC proteins, and all of them showed strong conservation with their Arabidopsis thaliana counterparts. This study indicated that all eight plant ABC protein paralog subfamilies were identified in the H. brasiliensis latex, of which ABCB, ABCG and ABCI were the most abundant. Real-time quantitative reverse transcription-polymerase chain reaction assays demonstrated that gene expression of several latex ABC proteins was regulated by ethylene, jasmonic acid or bark tapping (a wound stress) stimulation, and that HbABCB15, HbABCB19, HbABCD1 and HbABCG21 responded most significantly of all to the abiotic stresses. The identification and expression analysis of the latex ABC family proteins could facilitate further investigation into their physiological involvement in latex metabolism and rubber biosynthesis by H. brasiliensis.

A system for treatment of diabetic foot ulcers using led irradiation and natural latex

Directory of Open Access Journals (Sweden)

Gustavo Adolfo Marcelino de Almeida Nunes

Full Text Available Abstract Introduction: We developed and tested a new system for inducing the healing of diabetic foot ulcers. The system relies on the regenerative properties of its two components: an insole with a sheet of natural latex and a device that contains a matrix of light emitting diodes with wavelength of 635 nm. Methods The electronic and latex based devices were developed, and a four weeks test was performed in one control group (CG of five ulcers and one experimental group (EG of eight ulcers. The CG was treated with a standard approach, based on a silver-releasing foam dressing, and the EG was treated with the system under test. For each ulcer, an index for quantifying the percentage ulcer recovery, named CRU(%, has been calculated; a CRU(% = 0% means no healing, and a CRU(% = 100% means total healing. Results There were statistically significant increases of CRU(% of 51.8% (p = 0.022, for the CG, and of 78.4% (p < 0.001, for the EG. The increase in the EG was higher than the increase in the CG, and the difference was statistically significant (p < 0.001. The results showed that the proposed method had, for these particular sets of ulcers, faster healing rates, than for the standard method. Conclusion The results hint that the proposed method seems promising as a future treatment method. However, the technique must undergo further testing before it can be considered for extensive clinical applications.

Occupational noise-induced hearing loss in Indian steel industry workers: an exploratory study.

Science.gov (United States)

Singh, Lakhwinder Pal; Bhardwaj, Arvind; Deepak, Kishore Kumar

2013-04-01

The present study focused on exploring the current level of hearing protection and subsequently determined the prevalence of occupational noise-induced hearing loss among casting and forging industry workers. The casting and forging industry provides employment to a significant portion of the population. The level of hearing protection was assessed through questionnaire survey of 572 workers. Out of these workers, 165 and another control group of 57 participants were assessed by formal audiometry. Audiometric tests were conducted at frequencies of 1.0 KHz to 8.0 KHz.The occurrence of hearing loss was determined on the basis of a hearing threshold level with a low fence of 25 dB. Student's test and ANOVA were used to compare the various groups; a p value steel industry are highly exposed to occupational noise. The majority of workers are not protected from noise-induced hearing loss. There is a need to provide special ear protectors for workers engaged in forging. A complete hearing protection program, including training, audiometry, job rotation, and the use of hearing protection devices, needs to be introduced.

Wound induced tanscriptional regulation of benzylisoquinoline pathway and characterization of wound inducible PsWRKY transcription factor from Papaver somniferum.

Directory of Open Access Journals (Sweden)

Sonal Mishra

Full Text Available Wounding is required to be made in the walls of the green seed pod of Opium poppy prior exudation of latex. To withstand this kind of trauma plants regulate expression of some metabolites through an induced transcript level. 167 unique wound-inducible ESTs were identified by a repetitive round of cDNA subtraction after 5 hours of wounding in Papaver somniferum seedlings. Further repetitive reverse northern analysis of these ESTs revealed 80 transcripts showing more than two fold induction, validated through semi-quantitative RT-PCR & real time expression analysis. One of the major classified categories among identified ESTs belonged to benzylisoquinoline transcripts. Tissue specific metabolite analysis of benzylisoquinoline alkaloids (BIAs in response to wounding revealed increased accumulation of narcotine and papaverine. Promoter analysis of seven transcripts of BIAs pathway showed the presence of W-box cis-element with the consensus sequence of TGAC, which is the proposed binding site for WRKY type transcription factors. One of the Wound inducible 'WRKY' EST isolated from our subtracted library was made full-length and named as 'PsWRKY'. Bacterially expressed PsWRKY interacted with the W-box element having consensus sequence TTGACT/C present in the promoter region of BIAs biosynthetic pathway genes. PsWRKY further activated the TYDC promoter in yeast and transiently in tobacco BY2 cells. Preferential expression of PsWRKY in straw and capsule and its interaction with consensus W-box element present in BIAs pathway gene transcripts suggest its possible involvement in the wound induced regulation of BIAs pathway.

Polybutadiene latex particle size distribution analysis utilizing a disk centrifuge

NARCIS (Netherlands)

Verdurmen, E.M.F.J.; Albers, J.G.; German, A.L.

1994-01-01

Polybutadiene (I) latexes prepd. by emulsifier-free emulsion polymn. and having particle diam. 50-300 nm for both unimodal and bimodal particles size distributions were analyzed by the line-start (LIST) method in a Brookhaven disk centrifuge photosedimentometer. A special spin fluid was designed to

Assay of anti-HBs antibodies using a recombinant antigen and latex particle counting: comparison with five commercial tests.

Science.gov (United States)

Galanti, L M; Cornu, C; Masson, P L; Robert, A R; Becheanu, D; Lamy, M E; Cambiaso, C L

1991-05-01

An assay of anti-HBs antibodies based on agglutination of latex particles coated with recombinant HBs-antigen was compared with Abbott radioimmunoassay (Abbott-RIA), which uses a human plasma-derived antigen. The population examined consisted of 76 Abbott-RIA anti-HBs-negative prevaccinated subjects and 1044 serum samples anti-HBs found positive by Abbott-RIA, including 283 samples of subjects vaccinated either with a human plasma-derived vaccine (group A; n = 180) or with a recombinant vaccine (group B; n = 103). Correlation coefficients between the two techniques were respectively r = 0.89 for the whole population (n = 1044), r = 0.98 in group A and r = 0.74 in group B. Anti-HBs titres were higher with latex than with RIA in group B as shown by the regression slopes: latex = 508 + 1.11 RIA in group A and latex = -1138 + 3.97 RIA in group B, suggesting that some vaccinated subjects from group B produced antibodies against epitopes proper to the recombinant antigen. In the prevaccinated population and in group A, the latex results were compared with those of radioimmunoassays (Abbott, Sorin) and enzyme immunoassays (Behring, Roche, Pasteur). Only the Roche-EIA detected anti-HBs in the prevaccinated subjects. The correlation between the various immunoassays was r greater than 0.96 only for values higher than 100 IU/l.

Clonal stability of latex yield in eleven clones of Hevea brasiliensis Muell. Arg.

Directory of Open Access Journals (Sweden)

K.O. Omokhafe

2003-01-01

Full Text Available Eleven Hevea brasiliensis clones were evaluated for clonal stability of latex yield. A randomized complete block design was used with four replicates, two locations, seven years and three periods per year. Stability analysis was based on clone x year and clone x year x location interactions. Five stability parameters viz environmental variance, shukla's stability variance, regression of clonal latex yield on environmental index, variance due to regression and variance due to deviation from regression were applied. There was significant clone x environment effect at the two levels of interaction. Among the eleven clones, C 162 was outstanding for clonal stability and it can serve as donor parent for stability alleles. Three clones (C 76, C 150 and C 154 were also stable. The four stable clones (C 76, C 150, C 154 and C 162 are suitable for broad-spectrum recommendation for latex yield. Five clones (C 83, C 143, C 163, C 202 and RRIM 600 will require environment-specific recommendation because of their unstable phenotype. The stability feature of two clones (C 145 and C 159 was not clear and this will be investigated in subsequent studies.

Trial Production of Surgical Gloves from Irradiated Natural Rubber Latex on Factory Scale

Directory of Open Access Journals (Sweden)

M. Utama

2005-07-01

Full Text Available Trial production of surgical gloves from irradiated natural rubber latex at the PT. Laxindo Utama Serang Banten glove factory has been carried out. The variation of heating temperature and leaching time during processing were evaluated. The physical and mechanical properties and the protein allergen respond of surgical gloves using ELISA method were measured. The results showed that the physical and mechanical of surgical gloves such as tensile strength, modulus, and elongation at break arefound to meet the requirements of the ISO or SNI standard for surgical gloves. While the allergic response through clinical tested latex-sensitive protein allergen known as ELISA test is found to be negative.

Effect of copolymer latexes on physicomechanical properties of mortar containing high volume fly ash as a replacement material of cement.

Science.gov (United States)

Negim, El-Sayed; Kozhamzharova, Latipa; Gulzhakhan, Yeligbayeva; Khatib, Jamal; Bekbayeva, Lyazzat; Williams, Craig

2014-01-01

This paper investigates the physicomechanical properties of mortar containing high volume of fly ash (FA) as partial replacement of cement in presence of copolymer latexes. Portland cement (PC) was partially replaced with 0, 10, 20, 30 50, and 60% FA. Copolymer latexes were used based on 2-hydroxyethyl acrylate (2-HEA) and 2-hydroxymethylacrylate (2-HEMA). Testing included workability, setting time, absorption, chemically combined water content, compressive strength, and scanning electron microscopy (SEM). The addition of FA to mortar as replacement of PC affected the physicomechanical properties of mortar. As the content of FA in the concrete increased, the setting times (initial and final) were elongated. The results obtained at 28 days of curing indicate that the maximum properties of mortar occur at around 30% FA. Beyond 30% FA the properties of mortar reduce and at 60% FA the properties of mortar are lower than those of the reference mortar without FA. However, the addition of polymer latexes into mortar containing FA improved most of the physicomechanical properties of mortar at all curing times. Compressive strength, combined water, and workability of mortar containing FA premixed with latexes are higher than those of mortar containing FA without latexes.

Diagnosis of Trichomonous vaginalis by microscopy, latex agglutination, diamond's media, and PCR in symptomatic women, Khartoum, Sudan.

Science.gov (United States)

Saleh, Amir M; Abdalla, Hamid S; Satti, Abdelsalam B; Babiker, Suad M; Gasim, Gasim I; Adam, Ishag

2014-03-06

Trichomoniasis is the most common sexually transmitted disease. However, limited data are available on an effective technique for the diagnosis of Trichomonas vaginalis. A cross-sectional study was conducted to evaluate the accuracy of wet mount microscopy, latex agglutination, Diamond's media, and polymerase chain reaction (PCR) for detection of T. vaginalis among symptomatic women who attended the gynecological clinic at Khartoum, Sudan. Of the 297 women studied, 252 (84.8%) were positive for T. vaginalis by wet mount microscopy, 257 (86.5%) by latex agglutination, 253 (85.2%) by Diamond's media, and 253 (85.2%) by PCR. The sensitivity and specificity of wet mount microscopy were 99.2% and 97.7%, respectively, compared with PCR. The sensitivity and specificity of latex agglutination and Diamond's media were 99.6% and 88.6%, and 100.0% and 86.4%, respectively, compared with PCR. In this study, wet mount microscopy, latex agglutination, and Diamond's media were found to be highly sensitive and specific. However, the availability and cost effectiveness might limit the use of Diamond's media and PCR in routine practice. The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/7859723851211496.

Environmental DNA (eDNA): A tool for quantifying the abundant but elusive round goby (Neogobius melanostomus)

Science.gov (United States)

Nevers, Meredith; Byappanahalli, Muruleedhara; Morris, Charles C.; Shively, Dawn; Przybyla-Kelly, Katarzyna; Spoljaric, Ashley M.; Dickey, Joshua; Roseman, Edward

2018-01-01

Environmental DNA (eDNA) is revolutionizing biodiversity monitoring, occupancy estimates, and real-time detections of invasive species. In the Great Lakes, the round goby (Neogobius melanostomus), an invasive benthic fish from the Black Sea, has spread to encompass all five lakes and many tributaries, outcompeting or consuming native species; however, estimates of round goby abundance are confounded by behavior and habitat preference, which impact reliable methods for estimating their population. By integrating eDNA into round goby monitoring, improved estimates of biomass may be obtainable. We conducted mesocosm experiments to estimate rates of goby DNA shedding and decay. Further, we compared eDNA with several methods of traditional field sampling to compare its use as an alternative/complementary monitoring method. Environmental DNA decay was comparable to other fish species, and first-order decay was lower at 12°C (k = 0.043) than at 19°C (k = 0.058). Round goby eDNA was routinely detected in known invaded sites of Lake Michigan and its tributaries (range log10 4.8–6.2 CN/L), but not upstream of an artificial fish barrier. Traditional techniques (mark-recapture, seining, trapping) in Lakes Michigan and Huron resulted in fewer, more variable detections than eDNA, but trapping and eDNA were correlated (Pearson R = 0.87). Additional field testing will help correlate round goby abundance with eDNA, providing insight on its role as a prey fish and its impact on food webs.

Preparation and Characterization of Conducting Polymer Latices by Chemical Polymerization of Aniline or Anisidine in Presence of Latex: Study of Their Electroactivity and Anti-Corrosion Properties

Directory of Open Access Journals (Sweden)

Bakhshali Massoumi

2013-06-01

Full Text Available Poly (vinylacetate-co-butylmethacrylate was prepared in presence of potassium persulphate as an oxidizing agent in aqueous solution of dodecylbenzene sulfonate sodium as an emulsifying agent. Then, aniline was polymerized by chemical oxidation method at three different concentrations of aniline monomer (0.1, 0.2 and 0.3 M in toluene in presence of poly(vinylacetate-co-butylmethacrylate in order to obtain polyaniline/poly(vinylacetate-co-butylmethacrylate. To prepare conducting-latex of polyanisidine/poly(vinylacetate-co-butylmethacrylate the same method was employed as above for aniline monomer in obtaining conducting polyaniline/poly(vinylacetate-co-butylmethacrylate latex. In addition, the purification of conducting-latex polymers, polyaniline/poly(vinylacetate-co-butylmethacrylate and polyanisidine/poly(vinylacetate-co-butylmethacrylate was conducted and preparation of tin layer films of conducting-latex polymers was carried out by casting method on glassy lames. The electroactivity properties of the prepared latex-polymers, polyaniline/poly(vinylacetate-co-butylmethacrylate and polyanisidine/poly(vinylacetate-co-butylmethacrylate were investigated by cyclic voltammetery (CV. The voltamogrames showed that the latex films were electroactive. Because of conductivity and electroactivity, the obtained films may find applications in anti-corrosion coatings. The anti-corrosion properties of conducting-latex polymers were studied on aluminum surface by impedance technique. The structure of the prepared conducting-latex polymers was confirmed by Fourier transform infrared (FTIR. Finally, the electrical conductivity of synthesized conducting-latex polymers, polyaniline/poly(vinylacetate-co-butylmethacrylate and polyanisidine/poly(vinylacetate-co-butylmethacrylate was measured by four probe technique.

Detection and toxicity assessment of nitrosamines migration from latex gloves in the Chinese market.

Science.gov (United States)

Feng, Di; Wang, Huiping; Cheng, Xuelian; Wang, Jiedong; Ning, Lifeng; Zhou, Qingfeng; Zhou, Yue; Yang, Quanli

2009-09-01

Nitrosamines are potent carcinogens and have been found in latex products. In 2007, twenty-seven natural latex gloves including sterile gloves, examination gloves and household use gloves were sampled from the Chinese market. This study monitored the migration of nitrosamines and nitrosatable substance from these gloves, and evaluated their mutagenicity using a Salmonella typhimurium mutation assay (Ames assay) with the strains TA98, TA97, TA100 and TA102 and by a micronucleus test (MN test) using ICR mice. In addition, the cytotoxicity of these compounds was determined by a MTT assay. N-nitrosodimethylamine (NDMA), N-nitrosodiethylamine (NDEA) and N-nitrosodibutylamine (NDBA) were all found in samples treated with artificial sweat for 4h at 37 degrees C, and total nitrosamines varied from 18.89 to 244.51microg/Kg. The nitrosamine mixture of NDMA, NDEA and NDBA was used in both the Ames assay and the MN test. The proportion of NDMA, NDEA and NDBA (1:10:20) was selected according to the proportion of nitrosamines migration from sample E05. In the Ames assay, the lowest dose (1.98 x 10(-3)microg per plate) produced a positive result in the TA98 strain, corresponding to nitrosamines migration from sample E05 of 0.016g (the total nitrosamines migration from glove E05 was 122.55 microg/kg). The TA100 strain responded positively at a dose of 4.96 x 10(-2)microg per plate, corresponding to nitrosamines migration from glove E05 of 0.040g. The MN test showed nitrosamine migration of 3.04 mg from 2066 pairs of sample E05 and could induce micronuclei in one mouse weighing 28g (average weight of one E05 glove was 6g). Extracts from gloves were found to be cytotoxic and there was a significant correlation between cytotoxicity (IC50) and the release level of nitrosamines. In conclusion, in view of the high content of nitrosamines in latex gloves and the potential toxicity of nitrosamines migration from these gloves, it is suggested that both an effective and feasible detection

Technology round and management of technology

International Nuclear Information System (INIS)

Park, Yong Tae

1994-04-01

This book deals with beginning of technology round with background of it, change of scientific technique paradigm with economy, management and policy, change of international political environment globalization of technical and economic environment, formation of strategic alliance, intensifying regionalism, new GATT system, UR and technology round, new international technique regulation and technology round of OECD, feature and meaning of technology round, assignment and scientific technique of Korea, past and present of scientific technology in Korea, correspondence for technology round.

Plutonium Round Robin Test

International Nuclear Information System (INIS)

Dudder, G.B.; Herbillon, G.H.

2001-01-01

Full text: The goal of nuclear forensics is to develop a preferred approach to illicit trafficking investigations. This approach must be widely understood and acceptable as credible. The principle objectives of the Round Robin Test are to prioritize the forensic techniques and methods, evaluate attribution capabilities, and examine the utility of database. The Plutonium Round Robin has made a tremendous contribution to fulfilling these goals through a collaborative learning experience that resulted from the outstanding efforts of the six participating international laboratories. A prioritize list of techniques and methods has been developed based on this exercise. Future work will focus on a Highly Enriched Round Robin and extent to which the techniques and methods can be generalized. The Plutonium Round Robin demonstrated a rather high level of capability to determine the important characteristics of the materials and processes using analytical methods. When this capability to was combined with the appropriate knowledge and database, it resulted in a demonstrated capability to attribute the source of the materials to a specific nuclear fuel, reactor, and reprocessing facility. A number of shortfalls were also identified in our current capabilities. These included alternative dating techniques. Light Water Reactor discrimination techniques, and the lack of a comprehensive network of data/knowledge bases. The result of the Round Robin will be used to develop guidelines or a 'recommended protocol' to be made available to the interested authorities and countries to use in real cases. The poster will present a summary of the results of the Plutonium Round Robin and describe the plans the subsequent Highly Enriched Uranium Round Robin Test. (author)

Toxicological evaluation of natural rubber latex film vulcanized with ionizing radiation

International Nuclear Information System (INIS)

Campos, Vania E.; Higa, Olga Z.; Guedes, Selma M.L.; Hanada, Seico

1999-01-01

The industrial vulcanization of natural rubber latex (NRL) is made worldwide by conventional process using sulphur, but it can be made by an alternative process using ionizing radiation. The main advantages of this process are related to absence of toxic effect promoted by chemical substances added to the NRL on the conventional process. In this research was tested the toxicological properties of the films vulcanized by the alternative process in relation to that vulcanized by the conventional process. The toxicity was evaluated by in vitro cytotoxicity assay and in vivo systemic toxicity assay. The results showed that vulcanized films by gamma ray are less cytotoxic. The systemic toxicity assay showed that only the vulcanized film using sulphur induced allaying and motor in coordination on the animals for a short period of time. these results evidence the less cytotoxic properties of vulcanized films by gamma ray in relation to that vulcanized by conventional process using sulphur. (author)

Radio-vulcanization of natural rubber in the latex phase. Study of an experimental 1 tonne per hour production; Radio-vulcanisation du caoutchouc naturel en phase latex. Etude d'une production experimentale de 1 tonne par heure

Energy Technology Data Exchange (ETDEWEB)

Leveque, P; Puig, J R; Roudeix, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

After briefly reviewing the main research carried out on the radio-vulcanization of latex and elastomers, a description is given of 4 types of cell which have been used successively with a view to industrial irradiation. They have made it possible to acquire the information necessary for resolving the main problem arising during irradiation - the formation of coagulum. The first two cell are designed for irradiation by a horizontal beam ('Dynamitron'), the two others use a vertical beam ('Circe'). The study of the properties of the rubber obtained shows it to compare favorably with 'Revultex'. In the appendix are given some characteristics of natural latex and information about its processing. (authors) [French] Apres un rappel des principales etudes sur la radio-vulcanisation du latex et des elastomeres, on decrit les quatre types de cellules successivement essayes en vue de l'irradiation industrielle. Ils ont permis d'acquerir les informations necessaires a la resolution du probleme principal pose par l'irradiation, la formation de coagulum au cours de celle,-ci. Les deux premiers sont concus pour l'irradiation par un faisceau horizontal ('Dynamitron'), les derniers par un faisceau vertical ('Circe'). L'etude des proprietes du caoutchouc obtenu montre qu'il se compare favorablement au 'Revultex'. Un apercu est donne en annexe des caracteristiques du latex naturel et de sa mise en oeuvre. (auteurs)

A Latex Metabolite Benefits Plant Fitness under Root Herbivore Attack.

Directory of Open Access Journals (Sweden)

Meret Huber

2016-01-01

Full Text Available Plants produce large amounts of secondary metabolites in their shoots and roots and store them in specialized secretory structures. Although secondary metabolites and their secretory structures are commonly assumed to have a defensive function, evidence that they benefit plant fitness under herbivore attack is scarce, especially below ground. Here, we tested whether latex secondary metabolites produced by the common dandelion (Taraxacum officinale agg. decrease the performance of its major native insect root herbivore, the larvae of the common cockchafer (Melolontha melolontha, and benefit plant vegetative and reproductive fitness under M. melolontha attack. Across 17 T. officinale genotypes screened by gas and liquid chromatography, latex concentrations of the sesquiterpene lactone taraxinic acid β-D-glucopyranosyl ester (TA-G were negatively associated with M. melolontha larval growth. Adding purified TA-G to artificial diet at ecologically relevant concentrations reduced larval feeding. Silencing the germacrene A synthase ToGAS1, an enzyme that was identified to catalyze the first committed step of TA-G biosynthesis, resulted in a 90% reduction of TA-G levels and a pronounced increase in M. melolontha feeding. Transgenic, TA-G-deficient lines were preferred by M. melolontha and suffered three times more root biomass reduction than control lines. In a common garden experiment involving over 2,000 T. officinale individuals belonging to 17 different genotypes, high TA-G concentrations were associated with the maintenance of high vegetative and reproductive fitness under M. melolontha attack. Taken together, our study demonstrates that a latex secondary metabolite benefits plants under herbivore attack, a result that provides a mechanistic framework for root herbivore driven natural selection and evolution of plant defenses below ground.

A Latex Metabolite Benefits Plant Fitness under Root Herbivore Attack.

Science.gov (United States)

Huber, Meret; Epping, Janina; Schulze Gronover, Christian; Fricke, Julia; Aziz, Zohra; Brillatz, Théo; Swyers, Michael; Köllner, Tobias G; Vogel, Heiko; Hammerbacher, Almuth; Triebwasser-Freese, Daniella; Robert, Christelle A M; Verhoeven, Koen; Preite, Veronica; Gershenzon, Jonathan; Erb, Matthias

2016-01-01

Plants produce large amounts of secondary metabolites in their shoots and roots and store them in specialized secretory structures. Although secondary metabolites and their secretory structures are commonly assumed to have a defensive function, evidence that they benefit plant fitness under herbivore attack is scarce, especially below ground. Here, we tested whether latex secondary metabolites produced by the common dandelion (Taraxacum officinale agg.) decrease the performance of its major native insect root herbivore, the larvae of the common cockchafer (Melolontha melolontha), and benefit plant vegetative and reproductive fitness under M. melolontha attack. Across 17 T. officinale genotypes screened by gas and liquid chromatography, latex concentrations of the sesquiterpene lactone taraxinic acid β-D-glucopyranosyl ester (TA-G) were negatively associated with M. melolontha larval growth. Adding purified TA-G to artificial diet at ecologically relevant concentrations reduced larval feeding. Silencing the germacrene A synthase ToGAS1, an enzyme that was identified to catalyze the first committed step of TA-G biosynthesis, resulted in a 90% reduction of TA-G levels and a pronounced increase in M. melolontha feeding. Transgenic, TA-G-deficient lines were preferred by M. melolontha and suffered three times more root biomass reduction than control lines. In a common garden experiment involving over 2,000 T. officinale individuals belonging to 17 different genotypes, high TA-G concentrations were associated with the maintenance of high vegetative and reproductive fitness under M. melolontha attack. Taken together, our study demonstrates that a latex secondary metabolite benefits plants under herbivore attack, a result that provides a mechanistic framework for root herbivore driven natural selection and evolution of plant defenses below ground.

Synthesis and characterization of novel fluoroalkyl-terminated hyperbranched polyurethane latex

Science.gov (United States)

Xu, Wei; Zhao, Weijia; Hao, Lifen; Wang, Sha; Pei, Mengmeng; Wang, Xuechuan

2018-04-01

Waterborne polyurethane (PU) emulsions are widely used in various fields and the demand for them is ever-increasing over the years. However, the hydrophilic chain extender inevitably bonded into the PU backbone can affect the water tolerance of PU. Thus, it is of great importance to improve PU water resistance effectively. Herein, novel fluoroalkyl-terminated hyperbranched polyurethane (HBPUF) latex was accordingly synthesized by graft reaction of perfluorohexyl ethyl alcohol and hyperbranched polyurethane (HBPU), which was previously obtained from interaction between hydroxyl-terminated hyperbranched polymer and PU prepolymer manufactured via the acetone process, as well as using neutralization, adding water, and high-speed stirring operations. We characterized the resultants and investigated its surface properties by IR, NMR, TEM, XRD, TGA, DSC, FE-SEM, AFM, XPS, and contact angle measurements, etc. IR and NMR tests confirmed that the fluorinated fragments had been grafted onto the tail end of HBPU. TEM, XRD, DSC, and FE-SEM results all accounted for the fact that there were multi-crystals in PU, HBPU and HBPUF. TGA results showed that thermal stabilities of the PU, HBPU, and HBPUF latex films were enhanced in turn. XPS and AFM analyses demonstrated that the fluorine-containing segments from the HBPUF terminals were prone to migrate and enrich on the film-air surface of the HBPUF latex film, which made water contact angle and water absorption of the HBPUF film be as 113.9° and 11.1%, respectively, compared to those of the PU film (77.8° and 136.2%). This research indicates that water resistance of the PU film can be efficiently enhanced by fluorinated polyurethane with novel fluoroalkyl-terminated hyperbranched structure.

[Criteria for the assessment of the noise-induced occupational hearing loss: international and national standards].

Science.gov (United States)

Izmerov, N F; Denisov, É I; Adeninskaia, E E; Gorblianskiĭ, Iu Iu

2014-01-01

The objective of the present paper was to review international and national standards for the criteria of assessment of the noise-induced occupational loss of hearing. The importance of healthy hearing for the occupational safety is emphasized which implies the necessity of the more rigorous criteria for hearing conservation in the workers engaged in the noisy technological environment compared with those for the general population. A rationale for the development of the standard program of hearing conservation in the workers engaged in the noisy technological environment is proposed including hygienic norms and rules or national state standards.

Anatomy of the ward round.

LENUS (Irish Health Repository)

O'Hare, James A

2008-07-01

The ward round has been a central activity of hospital life for hundreds of years. It is hardly mentioned in textbooks. The ward round is a parade through the hospital of professionals where most decision making concerning patient care is made. However the traditional format may be intimidating for patients and inadequate for communication. The round provides an opportunity for the multi-disciplinary team to listen to the patient\\'s narrative and jointly interpret his concerns. From this unfolds diagnosis, management plans, prognosis formation and the opportunity to explore social, psychological, rehabilitation and placement issues. Physical examination of the patient at the bedside still remains important. It has been a tradition to discuss the patient at the bedside but sensitive matters especially of uncertainty may better be discussed elsewhere. The senior doctor as round leader must seek the input of nursing whose observations may be under-appreciated due to traditional professional hierarchy. Reductions in the working hours of junior doctors and shortened length of stay have reduced continuity of patient care. This increases the importance of senior staff in ensuring continuity of care and the need for the joint round as the focus of optimal decision making. The traditional round incorporates teaching but patient\\'s right to privacy and their preferences must be respected. The quality and form of the clinical note is underreported but the electronic record is slow to being accepted. The traditional multi-disciplinary round is disappearing in some centres. This may be regrettable. The anatomy and optimal functioning of the ward round deserves scientific scrutiny and experimentation.

Radiation Vulcanization of Natural Rubber Latex (RVNRL): A Potential Material for Nuclear Power Plant Gloves

International Nuclear Information System (INIS)

Pairu Ibrahim; Wan Manshol Wan Zain; Keong, C.C.; Mohd Noorwadi Mat Lazim

2011-01-01

Radiation vulcanization of natural rubber latex has great potential for the production of nuclear power plant gloves due to its low ash and mineral content. And this is in-line with the role played by Malaysian Nuclear Agency as Technical Supporting Organization for Nuclear Power Program. This paper discussed the evaluation done to determine ash content in RVNRL and SVNRL films. Both samples were prepared using casting technique and the properties were compared. Films prepared from raw latex without any vulcanizing agent were regarded as a control. (author)

Study on grafting of monomer onto natural rubber latex by radiation technique

International Nuclear Information System (INIS)

Nguyen Tan Man; Le Hai; Tran Thi Tam; Le Huu Tu, Pham Thi Sam; Dao Minh Phuong; Ha Thuc Huy

2004-01-01

Radiation vulcanization of natural rubber latex has been extensively developed through programmers assisted by the IAEA and UNDP under RCA in Asia and Pacific Region. R-D has been done in most of the Member States with technical assistance from Japan's Takasaki Radiation Chemistry Establishment. Radiation vulcanized natural rubber latex (RVNRL) has many advantages over the conventional sulfur vulcanized latex, such as absence of nitrosamine and low cytotoxicity. Radiation crosslinking is a room temperature process, itself an important cost advantage, it is easily controlled and desired extend of crosslinking is easily achieved by controlling the dose (irradiation time). Disadvantages of RVNRL to be improved are poor physical properties of film such as low tensile strength and tear strength. The research groups of Japan, Thailand and Indonesia concentrated on the improvement of physical properties of RVNRL using radiation grafted PMMA as additive [2]. F. Sundardi and W. Sofiarti have reported that tensile strength and hardness increased by radiation grafting of styrene onto NR [5]. Ono et al have reported the grafting of MMA onto NR by gamma irradiation at a dose of 5 kGy for producing thermoplastic elastomers [4]. The objective of this project is to report the results of studies of radiation graft-copolymerization of methyl methacrylate (MMA) or styrene (St) onto natural rubber latex in order to improve their physico-mechanical properties and evaluation of grafted material using Small-Angle Neutron Scattering through FNCA Project. The grafting degree of MMA and St onto NR increased with the increase of irradiation dose and monomer concentration. The alteration of grafted products structure was determined by IR method. Tensile strength, Shore A hardness, 100% modulus of grafted products increased with the increase of monomer concentration and irradiation dose while elongation at break decreased. The grafted products were characterized by Transmission Electron

Effect of Copolymer Latexes on Physicomechanical Properties of Mortar Containing High Volume Fly Ash as a Replacement Material of Cement

Directory of Open Access Journals (Sweden)

El-Sayed Negim

2014-01-01

Full Text Available This paper investigates the physicomechanical properties of mortar containing high volume of fly ash (FA as partial replacement of cement in presence of copolymer latexes. Portland cement (PC was partially replaced with 0, 10, 20, 30 50, and 60% FA. Copolymer latexes were used based on 2-hydroxyethyl acrylate (2-HEA and 2-hydroxymethylacrylate (2-HEMA. Testing included workability, setting time, absorption, chemically combined water content, compressive strength, and scanning electron microscopy (SEM. The addition of FA to mortar as replacement of PC affected the physicomechanical properties of mortar. As the content of FA in the concrete increased, the setting times (initial and final were elongated. The results obtained at 28 days of curing indicate that the maximum properties of mortar occur at around 30% FA. Beyond 30% FA the properties of mortar reduce and at 60% FA the properties of mortar are lower than those of the reference mortar without FA. However, the addition of polymer latexes into mortar containing FA improved most of the physicomechanical properties of mortar at all curing times. Compressive strength, combined water, and workability of mortar containing FA premixed with latexes are higher than those of mortar containing FA without latexes.

Radiation-induced emulsion polymerization of tetrafluoroethylene

International Nuclear Information System (INIS)

Suwa, Takeshi

1979-10-01

The radiation-induced emulsifier-free emulsion polymerization of tetrafluoroethylene (TFE) has been studied at initial pressure 2 - 25 kg/cm 2 and temperature 30 0 - 110 0 C for dose rate 0.57 x 10 4 - 3.0 x 10 4 rad/hr. Polytetrafluoroethylene (PTFE), a hydrophobic polymer, forms as a stable latex in the absence of an emulsifier. Stability of the latex is governed by the dose rate/TFE pressure ratio; it increases with sufficient TFE monomer. PTFE particles produced in this polymerization system are stable due to the carboxyl end groups and adsorption of OH - and HF on the particles. PTFE latex of molecular weight higher than 2 x 10 7 is obtained by addition of a radical scavenger such as hydroquinone. The molecular weight of PTFE can be measured from the heat of crystallization conveniently with high reliability, which was found in the course of study on the melting and crystallization behavior. (author)

[The occupational radiation-induced cataract in five industrial radiographers].

Science.gov (United States)

Benzarti Mezni, A; Loukil, I; Hriz, N; Kallel, K; Mlaiki, N; Ben Jemaâ, A

2012-04-01

The industrial uses of ionizing radiation in Tunisia are expanding, especially in industry and most particularly in the nondestructive testing of welds. Thus workers operating in the non-destructive testing of welds may develop a radiation-induced cataract varying in time to onset depending on the dose. To describe the characteristics of the radiation-induced cataract in patients exposed to ionizing radiation, determine the risk factors of radiation-induced cataracts. This was an anamnestic, clinical, and environmental study of five cases of radiation-induced cataract in workers employed in non-destructive testing of welds. This series of five cases had a mean age of 30.2 years and 5.53 years of work experience, ranging from 14 months to 15 years. All the patients were male and industrial radiographers specialized in nondestructive testing of welds. The average duration of exposure to ionizing radiation was 5.53 years. None of the patients had worn protective gear such as eye goggles. The ophthalmic check-up for the five special industrial radiographers showed punctuate opacities in three cases, punctiform opacities in one eye in one case, and phacosclerosis with bilateral lens multiple crystalline stromal opacities in a case of micro-lens opacities in both eyes with opalescence of both eyes in one case. These cataracts had been declared as occupational diseases. The value of a specialized ophthalmologic surveillance among these workers and the early diagnosis of lens opacities must be emphasized. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

Thermal-kinetic study of natural rubber latex films vulcanized by using gamma radiation; Estudo termo-cinetico de filmes de latex de borracha natural de Hevea brasiliensis vulcanizada por radiacao gama

Energy Technology Data Exchange (ETDEWEB)

Leal, Ana Paula Pinho Rodrigues; Barros, Glaucione Gomes de [Brasilia Univ., DF (Brazil). Inst. de Quimica; Guedes, Selma M.L. [Instituto de Pesquisa em Energia Nuclear, Sao Paulo, SP (Brazil)

1999-07-01

Vulcanization of natural rubber latex by ionization radiation produces the crosslink in disperse latex particles. Advantages over conventional process of vulcanization are: the absence of carcinogenic nitrosamines, low cytotoxicity and better degradation at room conditions, due to mainly to the absence of sulfur, zinc oxide and dithiocarbamates. Thermogravimetric analysis (TG) is the measurement of the weight change of a material as a function of temperature and time. TG data different heat speed provide an alternative model of the kinetics of degradation of polymeric materials. The kinetic studies of this material showed a single degradation process at least for 76,5% of mass loss. The activation energy was 49 Kcal/mol. For higher mass loss (85%) the degradation was characterized by associate mechanism. (author)

Technology of Anticorrosive Protection of Steel Constructions by Coatings Based on Rapid-Hardening Bitumen-Latex Emulsion

Directory of Open Access Journals (Sweden)

Nykyforchyn, H.M.

2016-01-01

Full Text Available The recipes of rapid-hardening bitumen-latex emulsions and coatings on its base are created, in-laboratory tests of their physical, chemical and anticorrosive properties are carried out. The technology of anticorrosive protection and the installation technical documentation for making of aqueous bitumen-latex emulsion is developed, installation is mounted and a pilot lot of rapid-hardening emulsion is produced. Experimental-industrial approbation of the technology of coating formation on pipes in oil and gas industry is carried out.

Occupationally-acquired noise-induced hearing loss: a senseless workplace hazard.

Science.gov (United States)

Kurmis, Andrew P; Apps, Stacey A

2007-01-01

Occupational noise-induced hearing loss (ONIHL) describes an acquired hearing deficiency directly attributable to excessive workplace noise exposure. Data suggest that excessive noise attributes to approximately 37% of all adult causes of hearing loss and remains a significant contributor to employment-related morbidity internationally. Typically insidiously-acquired, often without frank progressive symptomatology, regional medical agencies continue to struggle with this potentially debilitating condition. The aim of the study was to provide a synopsis of the current understanding of ONIHL, its impact on individual workers and the wider international community, and to identify barriers to more uniform adoption of personal hearing protection. A review of the contemporary literature was performed using defined keyword searches and OVID, PubMed, and Google Scholar as primary electronic search engines. A number of published works were identified, describing aspects of the relationship between workplace-related noise exposure and subsequent development of employee hearing impairment, which demonstrate an overwhelming gender imbalance, with up to 97% of affected individuals being male. Industry-specific associations (e.g., mining, manufacturing and heavy construction) were well documented, as were links to toxin-specific exposures, in the recognized development of hearing loss. However, evidence of integration of appraisal of the topically-current area of genetic susceptibility was often lacking. Much discordance still exists among international agencies in the prescriptive regulation and enforcement of "safe" exposure limits. Despite a high level of public awareness regarding the importance of hearing preservation and increasingly stringent international occupational health, safety and welfare requirements mandating provision of safer work environments, ONIHL continues to be a significant occupational hazard. ONIHL is permanent and may cause significant disability, for

Isolation of natural inhibitors of papain obtained from Carica papaya latex

Directory of Open Access Journals (Sweden)

Rubens Monti

2004-09-01

Full Text Available Studies were carried out to natural papain inhibitor from papaya latex. Fresh latex from green fruits of Carica papaya was collected and immediately transported in ice bath to the lab, from which three fractions with inhibitor effect of esterase papain activity were isolated by latex dialysis, Sephadex G-25 gel filtration and ionic exchange chromatography in SP-Sephadex C-25. The isolated fractions, identified as inhibitors I and II, showed a negative reaction with ninhydrin; however, the fraction identified as P-III showed positive reaction with ninhydrin. Kinetics data showed non-competitive inhibition (inhibitor I and uncompetitive (inhibitors II and P-III.Este trabalho apresenta novos dados sobre inibidores naturais de papaína. O látex fresco de frutos verdes de Carica papaya foi coletado pela manhã em plantações da região de Araraquara, SP, Brasil e imediatamente transportado ao laboratório em banho de gelo. Três frações com efeito inibitório da atividade esterásica da papaína foram isoladas a partir do látex fresco, através de diálise, filtração em Sephadex G-25 e cromatografia em SP-Sephadex C-25. As frações isoladas identificadas como inibidores I e II, mostraram reação negativa à ninidrina; entretanto, a fração identificada como P-III mostrou reação positiva. Dados cinéticos revelaram inibição não-competitiva (inibidor I e incompetitiva (inibidores II e P-III.

Natural membranes of Hevea brasiliensis latex as delivery system for Casearia sylvestris leaf components

Directory of Open Access Journals (Sweden)

Flávio A. Carvalho

Full Text Available ABSTRACT Natural latex from Hevea brasiliensis (Wild. ex A.Juss Müll.Arg., Euphorbiaceae, showed angiogenic action and Casearia sylvestris Sw., Salicaceae, leaf derivatives presented anti-inflammatory and wound healing activities. Therefore, an association of these effects was interesting for wound healing applications. The aims of this study were the development of membranes of natural latex incorporated with C. sylvestris leaf derivatives (ethanolic extract, diterpene concentrated fraction and casearin J, their chemical and physical characterization, and the evaluation of in vitro skin permeation and retention of C. sylvestris bioactive secondary metabolites (diterpenes and phenolic compounds. The membranes were developed mixing hydroethanolic solutions of C. sylvestris derivatives with latex and drying them in a desiccator. They were characterized by infrared spectroscopy, scanning electron microscopy, water vapor permeability and mechanical resistance assays, demonstrating that all membranes were permeable, resistant and homogeneous in surfaces. The permeation and retention assays demonstrated dermal penetration of phenolic compounds for ethanolic extract membrane and of casearin-like clerodane diterpenes for all membranes, indicating that these membranes have great potential for therapeutical application as a topical system for C. sylvestris components releasing.

Banyan latex: a facile fuel for the multifunctional properties of MgO nanoparticles prepared via auto ignited combustion route

International Nuclear Information System (INIS)

Anil Kumar, M R; Nagaswarupa, H P; Gurushantha, K; Pratapkumar, C; Prashantha, S C; Shashishekar, T R; Anantharaju, K S; Nagabhushana, H; Sharma, S C; Vidya, Y S; Daruka Prasad, B; Vivek Babu, C S; Vishnu Mahesh, K R

2015-01-01

MgO nanoparticles (MNPs) were prepared by a solution combustion route using banyan tree (BT) latex and glycine as fuels. The powder x-ray diffraction results indicate the formation of a single cubic phase and the crystallite size obtained from transmission electron microscopy was found to be ∼10–15 nm. Scanning electron microscopy result reveals spherical-shaped particles obtained with BT latex. However, in a chemical route, porous and agglomerated particles were obtained. The energy band gap of MNPs obtained using BT latex and a chemical route were found to be in the range 4.85–5.0 eV. Photoluminescence peaks observed at 473, 514, and 588 nm when excited at 433 nm, which were attributed to surface defects. The enhanced photocatalytic activities of spherical MgO were due to smaller crystallite size, higher surface defects, dye sensitization, and capability to reduce the electron–hole pair recombination. Further, green-synthesized MNPs exhibit superior antifungal activity against various plant pathogens. The present studies demonstrated a green engineering route for the synthesis of multifunctional MNPs using BT latex. (paper)

Sulfonated macro-RAFT agents for the surfactant-free synthesis of cerium oxide-based hybrid latexes.

Science.gov (United States)

Garnier, Jérôme; Warnant, Jérôme; Lacroix-Desmazes, Patrick; Dufils, Pierre-Emmanuel; Vinas, Jérôme; van Herk, Alex

2013-10-01

Three types of amphiphatic macro-RAFT agents were employed as compatibilizers to promote the polymerization reaction at the surface of nanoceria for the synthesis of CeO2-based hybrid latexes. Macro-RAFT copolymers and terpolymers were first synthesized employing various combinations of butyl acrylate as a hydrophobic monomer and acrylic acid (AA) and/or 2-acrylamido-2-methylpropane sulfonic acid (AMPS) as hydrophilic monomers. After characterizing the adsorption of these macro-RAFT agents at the cerium oxide surface by UV-visible spectrometry, emulsion copolymerization reactions of styrene and methyl acrylate were then carried out in the presence of the surface-modified nanoceria. Dynamic Light Scattering and cryo-Transmission Electron Microscopy were employed to confirm the hybrid structure of the final CeO2/polymer latexes, and proved that the presence of acrylic acid units in amphiphatic macro-RAFT agents enabled an efficient formation of hybrid structures, while the presence of AMPS units, when combined with AA units, resulted in a better distribution of cerium oxide nanoclusters between latex particles. Copyright © 2013 Elsevier Inc. All rights reserved.

Mechanism of n-butyl acrylate sensitization action in radiation vulcanization of natural rubber latex

International Nuclear Information System (INIS)

Sabharwal, S.; Chaudhari, C.V.; Bhardwaj, Y.K.; Majali, A.B.; Das, T.N.

1996-01-01

In order to understand the role of n-butyl acrylate (nBA) in radiation vulcanization of natural rubber latex, pulse radiolysis technique has been utilized to study the reactions of the transient species produced by reaction of OH . , e- aq and H . atoms with nBA in aqueous solutions. The results show that transients produced by reaction of e- aq with nBA alone are capable of propagating the polymerization reaction and enhance the vulcanization process. These results have been further confirmed by studying the effect of electron scavengers on the vulcanization behaviour of natural rubber latex in presence of nBA. (author). 3 refs., 3 figs

A time-motion study of inpatient rounds using a family-centered rounds model

NARCIS (Netherlands)

Bhansali, P.; Birch, S.; Campbell, J.K.; Agrawal, D.; Hoffner, W.; Manicone, P.; Shah, K.; Krieger, E.; Ottolini, M.

2013-01-01

OBJECTIVE: Family-centered rounds (FCR) have become increasingly prevalent in pediatric hospital settings. The objective of our study was to describe time use and discrete events during pediatric inpatient rounds by using a FCR model. METHODS: We conducted a prospective observational study at

Properties and Characterization of Kenaf-Filled Natural Rubber Latex Foam

Directory of Open Access Journals (Sweden)

Ahmad Fikri Abdul Karim

2015-12-01

Full Text Available Kenaf powder was incorporated with natural rubber latex (NRL compound and foamed to make natural rubber latex foam (NRLF by using a well known technique called the Dunlop method. Different loadings of kenaf powder were added to NRL compound and was foamed to make NRLF. The mechanical properties, density, compression, thermal, and micro-structural characterization of control NRLF and kenaf incorporated NRLF were studied. Increasing content of kenaf reduced the tensile strength, elongation at break, and compressive strength of a NRLF. Modulus at 100% elongation and density of the NRLF increased with an increase in filler loading. Higher kenaf loading indicated higher elasticity of kenaf-filled NRLF, but the recovery percentage of kenaf-filled NRLF decreased with increasing kenaf loading. From thermogravimetric analysis (TGA result, an increase in the amount of kenaf loading from 1 to 7 phr increased the thermal stability of kenaf-filled NRLF. Morphological and micro-structural characterization performed by using scanning electron microscopy (SEM showed that kenaf powder filled up the micro-sized pores in the open cell structure of kenaf-filled NRLF.

Identification, quantification, spatiotemporal distribution and genetic variation of major latex secondary metabolites in the common dandelion (Taraxacum officinale agg.).

Science.gov (United States)

Huber, Meret; Triebwasser-Freese, Daniella; Reichelt, Michael; Heiling, Sven; Paetz, Christian; Chandran, Jima N; Bartram, Stefan; Schneider, Bernd; Gershenzon, Jonathan; Erb, Matthias

2015-07-01

The secondary metabolites in the roots, leaves and flowers of the common dandelion (Taraxacum officinale agg.) have been studied in detail. However, little is known about the specific constituents of the plant's highly specialized laticifer cells. Using a combination of liquid and gas chromatography, mass spectrometry and nuclear magnetic resonance spectrometry, we identified and quantified the major secondary metabolites in the latex of different organs across different growth stages in three genotypes, and tested the activity of the metabolites against the generalist root herbivore Diabrotica balteata. We found that common dandelion latex is dominated by three classes of secondary metabolites: phenolic inositol esters (PIEs), triterpene acetates (TritAc) and the sesquiterpene lactone taraxinic acid β-D-glucopyranosyl ester (TA-G). Purification and absolute quantification revealed concentrations in the upper mgg(-1) range for all compound classes with up to 6% PIEs, 5% TritAc and 7% TA-G per gram latex fresh weight. Contrary to typical secondary metabolite patterns, concentrations of all three classes increased with plant age. The highest concentrations were measured in the main root. PIE profiles differed both quantitatively and qualitatively between plant genotypes, whereas TritAc and TA-G differed only quantitatively. Metabolite concentrations were positively correlated within and between the different compound classes, indicating tight biosynthetic co-regulation. Latex metabolite extracts strongly repelled D. balteata larvae, suggesting that the latex constituents are biologically active. Copyright © 2015 Elsevier Ltd. All rights reserved.

texreg: Conversion of Statistical Model Output in R to LATEX and HTML Tables

Directory of Open Access Journals (Sweden)

Philip Leifeld

2013-11-01

Full Text Available A recurrent task in applied statistics is the (mostly manual preparation of model output for inclusion in LATEX, Microsoft Word, or HTML documents usually with more than one model presented in a single table along with several goodness-of-fit statistics. However, statistical models in R have diverse object structures and summary methods, which makes this process cumbersome. This article first develops a set of guidelines for converting statistical model output to LATEX and HTML tables, then assesses to what extent existing packages meet these requirements, and finally presents the texreg package as a solution that meets all of the criteria set out in the beginning. After providing various usage examples, a blueprint for writing custom model extensions is proposed.

Radiation-induced emulsion copolymerization of tetrafluoroethylene with propylene in flow system, 10

International Nuclear Information System (INIS)

Watanabe, Hiromasa; Ito, Masayuki; Okamoto, Jiro; Machi, Sueo.

1982-02-01

Radiation-induced emulsion copolymerization of tetrafluoroethylene with propylene by continuous operation was carried out using a flow apparatus with tank type reactor of 5 liter under a constant pressure of 30 kg/cm 2 , a temperature of 40 0 C, and a propylene fraction in monomer gas of 0.1. The polymer concentration in latex reaches to steady value after two times longer operation than mean residence time of latex in the reactor. The steady polymer concentration increases accelerately with increase of the mean residence time. The polymer concentrations and the polymerization rates are 33, 70, 164 g/l-H 2 O and 35.1, 40.0, 49.5 g/h.l-H 2 O, respectively, obtained at the mean residence times of 0.94, 1.75 and 3.31 hour. The results are consistent with those in semi-batch operation under the same reaction conditions. The amounts of dissolved monomer in latex tends to decrease with decreasing the mean residence time. This shows that monomer supply by diffusion from gas phase to latex is not enough in shorter residence time of latex in the reactor. (author)

Hierarchically structured self-supported latex films for flexible and semi-transparent electronics

Science.gov (United States)

Määttänen, Anni; Ihalainen, Petri; Törngren, Björn; Rosqvist, Emil; Pesonen, Markus; Peltonen, Jouko

2016-02-01

Different length scale alterations in topography, surface texture, and symmetry are known to evoke diverse cell behavior, including adhesion, orientation, motility, cytoskeletal condensation, and modulation of intracellular signaling pathways. In this work, self-supported latex films with well-defined isotropic/anisotropic surface features and hierarchical morphologies were fabricated by a peel-off process from different template surfaces. In addition, the latex films were used as substrates for evaporated ultrathin gold films with nominal thicknesses of 10 and 20 nm. Optical properties and topography of the samples were characterized using UV-vis spectroscopy and Atomic Force Microscopy (AFM) measurements, respectively. The latex films showed high-level transmittance of visible light, enabling the fabrication of semi-transparent gold electrodes. Electrochemical impedance spectroscopy (EIS) measurements were carried out for a number of days to investigate the long-term stability of the electrodes. The effect of 1-octadecanethiol (ODT) and HS(CH2)11OH (MuOH) thiolation and protein (human serum albumin, HSA) adsorption on the impedance and capacitance was studied. In addition, cyclic voltammetry (CV) measurements were carried out to determine active medicinal components, i.e., caffeic acid with interesting biological activities and poorly water-soluble anti-inflammatory drug, piroxicam. The results show that the fabrication procedure presented in this study enables the formation of platforms with hierarchical morphologies for multimodal (optical and electrical) real-time monitoring of length-scale-dependent biomaterial-surface interactions.

An evidence-based approach to medication preparation for the surgical patient at risk for latex allergy: is it time to stop being stopper poppers?

Science.gov (United States)

Heitz, James W; Bader, Stephen O

2010-09-01

The prevalence of latex allergy is increasing in surgical patient populations. Avoidance of exposure to the allergen is essential to minimizing perioperative complications in patients suspected to be at risk. Natural rubber latex has historically been ubiquitous in medical devices containing rubber. In 1998, the Food and Drug Administration (FDA) began to require the labeling of medical devices made from natural rubber latex; since that time substantial progress has been made in identifying latex-free alternatives. However, the rubber stoppers commonly found in pharmaceutical vial closures are exempt from FDA labeling requirements. Examination of the clinical and basic science literature regarding pharmaceutical vial closures supports limiting the rubber stopper to a single needle puncture as a safer practice, with the caveat that no strategy exists for the complete elimination of risk as long as stoppers made from natural rubber latex are used in pharmaceutical vials intended for human use. Copyright © 2010 Elsevier Inc. All rights reserved.

Concentrations, Stability, and Isolation of the Furan Fatty Acid 9-(3-Methyl-5-pentylfuran-2-yl)-nonanoic Acid from Disposable Latex Gloves.

Science.gov (United States)

Müller, Marco; Hogg, Melanie; Ulms, Kerstin; Vetter, Walter

2017-09-13

Because of their antioxidant properties, furan fatty acids (furan-FAs) are valuable minor compounds with a widespread occurrence in all living matter. Unfortunately, pure standards are not readily available, because they usually contribute only 1% to the lipid fraction. A known exception of this is the milky fluid of Hevea brasiliensis, commonly known as latex, in which the furan-FA 9-(3-methyl-5-pentylfuran-2-yl)-nonanoic acid (9M5) contributes about 90% to the triacylglycerides. In this study, we investigated the content of 9M5 in 30 different disposable latex gloves, which ranged from 0.7 to 8.2 mg/g of glove. The light degradability of 9M5 in latex gloves was investigated, and different amounts of 9M5 in disposable latex gloves were attributed to varying exposure time to light. Additionally, over 100 mg of the methyl or ethyl ester of 9M5 (purity of >98%) could be extracted from disposable latex gloves, employing cold extraction and silver ion chromatography. With this method, standards for the quantitation of furan-FAs are obtained easily and rapidly in all laboratories.

The rapid determination of volatile fatty acid number in para rubber latex using fourier transform-near infrared spectroscopy based on quantification and discrimination model

Directory of Open Access Journals (Sweden)

Sureeporn Narongwongwattana

2015-09-01

Full Text Available Volatile Fatty Acid number (VFA no. is one of the parameters indicating the state of quality of Para rubber latex at that particular time. Most factories analyze this parameter using standard analytical method as in ISO 506:1992(E. Nevertheless, this procedure is complicated, chemical and time consuming, as well as skilled analyst required. Therefore, near infrared (NIR spectroscopy which is rapid, accurate and nonchemicals method was applied to determine the VFA no. in field latex and concentrated latex based on quantification and discriminant model. The best calibration equation was obtained from standard normal variate (SNV spectra in the region of 6109.7–5770.3, 4613.1–4242.9 cm-1 with R = 0.832, SECV = 0.036 and no bias. From the performance check, statistically it was found that SECV and bias were low enough for practical acceptance and the predicted VFA no. was not different significantly from actual VFA no. at 95% confidence intervals. In addition, discriminant model was developed to separate good quality latex from the deteriorated latex using VFA no. at 0.06 as standard as in ISO 2004:2010(E. The discriminant model can be used to screen the latex with overall accuracy of 91.86% in validation set.

Dynamics of ballistically injected latex particles in living human endothelial cells

NARCIS (Netherlands)

Li, Y.; Vanapalli Veera, V.S.A.R.; Vanapalli, Srinivas; Duits, Michael H.G.

2009-01-01

We studied the dynamics of ballistically injected latex particles (BIP) inside endothelial cells, using video particle tracking to measure the mean squared displacement (MSD) as a function of lag time. The MSD shows a plateau at short times and a linear behavior at longer times, indicating that the

The criteria and the design of MINT's latex irradiator

International Nuclear Information System (INIS)

Razali Hamzah; Muhd Khairi Muhd Said; Muhd Ariff Hamzah; Wan Manshol Wan Zin; Wan Abd Hadi Wan Abu Bakar; Muhd Noor Muhd Yunus

1996-01-01

The demand for RVNRL is continually on the upsurge and the present irradiation technique at the present SINAGAMA plant is not sufficient and practical to meet the demand. A number of conceptual designs were evolved to design according to the requirements of cost-effective and highly efficient plant. The number of options are described. In 1994 MINT work with NUKEM to build an automatic continuous latex irradiation plant

Early Human Occupation on the Northeast Tibetan Plateau

Science.gov (United States)

Rhode, D.; Madsen, D.; Brantingham, P.; Perrault, C.

2010-12-01

anthropogenic grazing pressure, because domestic yak/sheep remains are absent archaeologically before ~4000 BP. Our results have implications for the age of distinct Tibetan high-altitude physiological adaptations (5), suggested to be as recent as ~2750 BP. Prolonged occupation of Plateau margins commenced much earlier, but year-round occupation above 4000 m likely occurred only with the emergence of yak pastoralism (6). Genetic models need to consider which environmental factors lead to strong selection for genetic divergence (e.g., seasonal vs year-round occupation, occupation at ~3000 m vs >4000 m, etc); settlement history reconstructions such as that presented here can help. (1)Brantingham PJ, et al. 2007, Elsevier Dev Quat Sci 9:129-150; Madsen DB, et al. 2006, J Arch Sci 33:1433-1444. (2)Rhode D, et al. 2007, J Arch Sci 34:600-612. (3)Herzschuh, U, et al. 2010, Glo Ecol Biogeog 19:278-286. (4)Miehe G, et al. 2009, Palaeo Palaeo Palaeo 267:130-147.; Schlütz F., Lehmkuhl F., 2009, Quat Sci Rev 28:1449-1471. (5)Beall C, et al. 2010, PNAS 107:11459-11464; Simonson TS, et al. 2010, Science 329:72-75; Yi X. et al., 2010, Science 329:75-78. (6)Rhode D, et al. 2007, Elsevier Dev Quat Sci 9:205-226.

Sequencing and characterization of asclepain f: the first cysteine peptidase cDNA cloned and expressed from Asclepias fruticosa latex.

Science.gov (United States)

Trejo, Sebastián A; López, Laura M I; Caffini, Néstor O; Natalucci, Claudia L; Canals, Francesc; Avilés, Francesc X

2009-07-01

Asclepain f is a papain-like protease previously isolated and characterized from latex of Asclepias fruticosa. This enzyme is a member of the C1 family of cysteine proteases that are synthesized as preproenzymes. The enzyme belongs to the alpha + beta class of proteins, with two disulfide bridges (Cys22-Cys63 and Cys56-Cys95) in the alpha domain, and another one (Cys150-Cys201) in the beta domain, as was determined by molecular modeling. A full-length 1,152 bp cDNA was cloned by RT-RACE-PCR from latex mRNA. The sequence was predicted as an open reading frame of 340 amino acid residues, of which 16 residues belong to the signal peptide, 113 to the propeptide and 211 to the mature enzyme. The full-length cDNA was ligated to pPICZalpha vector and expressed in Pichia pastoris. Recombinant asclepain f showed endopeptidase activity on pGlu-Phe-Leu-p-nitroanilide and was identified by PMF-MALDI-TOF MS. Asclepain f is the first peptidase cloned and expressed from mRNA isolated from plant latex, confirming the presence of the preprocysteine peptidase in the latex.

Evaluation of force degradation characteristics of orthodontic latex elastics in vitro and in vivo.

Science.gov (United States)

Wang, Tong; Zhou, Gang; Tan, Xianfeng; Dong, Yaojun

2007-07-01

To evaluate the characteristics of force degradation of latex elastics in clinical applications and in vitro studies. Samples of 3/16-inch latex elastics were investigated, and 12 students between the ages of 12 and 15 years were selected for the intermaxillary and intramaxillary tractions. The elastics in the control groups were set in artificial saliva and dry room conditions and were stretched 20 mm. The repeated-measure two-way analysis of variance and nonlinear regression analysis were used to identify statistical significance. Overall, there were statistically significant differences between the different methods and observation intervals. At 24- and 48-hour time intervals, the force decreased during in vivo testing and in artificial saliva (P .05). In intermaxillary traction the percentage of initial force remaining after 48 hours was 61%. In intramaxillary traction and in artificial saliva the percentage of initial force remaining was 71%, and in room conditions 86% of initial force remained. Force degradation of latex elastics was different according to their environmental conditions. There was significantly more force degradation in intermaxillary traction than in intramaxillary traction. The dry room condition caused the least force loss. There were some differences among groups in the different times to start wearing elastics in intermaxillary traction but no significant differences in intramaxillary traction.

Expression of VEGF and collagen using a latex biomembrane as bladder replacement in rabbits

Directory of Open Access Journals (Sweden)

André Luís Alonso Domingos

2012-08-01

Full Text Available OBJECTIVE: To investigate the VEGF expression and collagen deposition using a latex biomembrane as bladder replacement in rabbits. MATERIALS AND METHODS: After partial cystectomy, a patch of a non-vulcanized latex biomembrane (2 x 2 cm was sewn to the bladder of rabbits with 5/0 monofilament polydioxanone sulfate sutures in a watertight manner. Groups of 5 animals were killed at 15, 45 and 90 days after surgery and the bladder was removed. Sections of 5µm were cut and stained with picrosirius-red in order to estimate the amount of extracellular matrix in the graft. To confirm the presence of VEGF in tissues, protein expression was determined by immunohistochemistry. RESULTS: No death, urinary leakage or graft extrusion occurred in any group. All bladders showed a spherical shape. A progressive reduction in the amount of collagen occurred in the graft area and was negatively and linearly correlated with time (p < 0.001. VEGF expression was higher in grafted areas when compared to controls at 15 and 45 days after surgery and decreased with time (p < 0.001. CONCLUSION: The latex biomembrane as a matrix for partial bladder replacement in rabbits promotes temporary collagen deposition and stimulates the angiogenic process.

The effects of temperature and pH bacterial degradation of latex ...

African Journals Online (AJOL)

The goal of this study was to integrate the activities of paint deterioration of microbial communities (microcosms) on the basis of environmental factors. The effect of temperature and pH on bacterial degradation of latex paint under humid condition by bacterial isolates was studied. Results obtained revealed that paint ...

Particle size, morphology and color tunable ZnO:Eu{sup 3+} nanophosphors via plant latex mediated green combustion synthesis

Energy Technology Data Exchange (ETDEWEB)

Chandrasekhar, M. [Prof. C.N.R. Rao Centre for Advanced Materials, Tumkur University, Tumkur 572 103 (India); Department of Physics, Acharya Institute of Technology, Bangalore 560 107 (India); Nagabhushana, H., E-mail: bhushanvlc@gmail.com [Prof. C.N.R. Rao Centre for Advanced Materials, Tumkur University, Tumkur 572 103 (India); Sharma, S.C. [B.S. Narayan Centre of Excellence for Advanced Materials, B.M.S. Institute of Technology, Yelahanka, Bangalore 560 064 (India); Department of Mechanical Engineering, B.M.S. Institute of Technology, Yelahanka, Bangalore 560 064 (India); Sudheer kumar, K.H. [Department of Environmental Science, Kuvempu University, Shankarghatta, Shimoga 577 451 (India); Department of Chemistry, B.M.S. Institute of Technology, Yelahanka, Bangalore 560 064 (India); B.S. Narayan Centre of Excellence for Advanced Materials, B.M.S. Institute of Technology, Yelahanka, Bangalore 560 064 (India); Dhananjaya, N. [Department of Physics, B.M.S. Institute of Technology, Yelahanka, Bangalore 560 064 (India); B.S. Narayan Centre of Excellence for Advanced Materials, B.M.S. Institute of Technology, Yelahanka, Bangalore 560 064 (India); Sunitha, D.V. [Prof. C.N.R. Rao Centre for Advanced Materials, Tumkur University, Tumkur 572 103 (India); Shivakumara, C. [Solid State and Structural Chemistry Unit, Indian Institute of Science, Bangalore 560 012 (India); Nagabhushana, B.M. [Department of Chemistry, M.S. Ramaiah Institute of Technology, Bangalore 560 054 (India)

2014-01-25

Highlights: • ZnO:Eu{sup 3+} phosphors were prepared by green synthesis route. • Morphology and particle size was tuned by varying the concentration of plant latex. • The phosphor show excellent chromaticity coordinates in the white region. -- Abstract: Efficient ZnO:Eu{sup 3+} (1–11 mol%) nanophosphors were prepared for the first time by green synthesis route using Euphorbia tirucalli plant latex. The final products were well characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–visible spectroscopy (UV–Vis), Fourier transform infrared spectroscopy (FTIR), etc. The average particle size of ZnO:Eu{sup 3+} (7 mol%) was found to be in the range 27–47 nm. With increase of plant latex, the particle size was reduced and porous structure was converted to spherical shaped particles. Photoluminescence (PL) spectra indicated that the peaks situated at ∼590, 615, 648 and 702 nm were attributed to the {sup 5}D{sub 0} → {sup 7}F{sub j(j=1,2,3,4)} transitions of Eu{sup 3+} ions. The highest PL intensity was recorded for 7 mol% with Eu{sup 3+} ions and 26 ml plant latex concentration. The PL intensity increases with increase of plant latex concentration up to 30 ml and there after it decreases. The phosphor prepared by this method show spherical shaped particles, excellent chromaticity co-ordinates in the white light region which was highly useful for WLED’s. Further, present method was reliable, environmentally friendly and alternative to economical routes.

EVALUATION OF CYTOTOXIC, ANTIMICROBIAL AND ANTIINFLAMMATORY PROPERTIES FROM THE LATEX OF IPOMEA STAPHYLINA

Directory of Open Access Journals (Sweden)

Prasanthi Narra

2014-04-01

Full Text Available The plant Ipomoea staphylina has been used in diverse traditional medication for the treatment of diseases and illness of human beings. The crude latex extract obtained from the stem of Ipomea staphylina was evaluated for cytotoxic, antimicrobial and wound healing properties. Cell viability and cytotoxicity assays such as Colony Formation method and Enzyme based methods that determined cell viability with a colorimetric method were performed to evaluate the medicinal properties of Ipomea staphylina. Similarly Microbiological Antibiotic Assay to determine the antimicrobial properties and wound healing properties were tested by determining the potent anti-inflammatory molecules that inhibited COX and LOX enzymes. Results showed that the latex crude extract of Ipomea staphylina showed potent Antimicrobial and Antiinflamatory properties, but the viability of the cells were unaffected.

Adsorption of immunoglobulin G on core-shell latex particles precoated with chaps

NARCIS (Netherlands)

Giacomelli, CE; Vermeer, AWP; Norde, W

2000-01-01

The aim of this work is to investigate the adsorption behavior of a monoclonal antibody (immunoglobulin G, IgG) on latex particles, possessing reactive chloromethyl groups, precoated with 3-([3-cholamidopropyl]dimethylammonio-1-propansulfonate (Chaps). The amount and reactivity of the surface

Adsorption of immunoglobulin G on core-shell latex particles precoated with chaps

NARCIS (Netherlands)

Giacomelli, C.E.; Vermeer, A.W.P.; Norde, W.

2000-01-01

The aim of this work is to investigate the adsorption behavior of a monoclonal antibody (immunoglobulin G, IgG) on latex particles, possessing reactive chloromethyl groups, precoated with 3-([3-cholamidopropyl]dimethylammonio-1-propanesulfonate (Chaps). The amount and reactivity of the surface

Round Earthen Towers in Zhangzhou

Institute of Scientific and Technical Information of China (English)

1992-01-01

The round earthen towers inZhangzhou,Fujifan Province,have long been famous a-round the world.Built of rammedearth,each tower consists uf four tofive stories and Is nearly 100 metersin diameter and 17 to 18meters high.Scatteredaround the mountains,valleys and plains insouthwestern Fujian,thetowers look very muchlike round castles.SomeChinese and foreign ar-chitercts,historians andfolk-custom researcherscall them“flyng sau-cers”from outer spaceor“mushrooms”fromearth.They represent,indeed,a unique archi-tectural style in theworld.

Efficiency of 1,9- Nonane-diol-diacrylate as a radiation vulcanization accelerator for natural rubber latex

International Nuclear Information System (INIS)

Haque, M.E.

2003-09-01

The efficiency of 1,9- Nonane-diol-diacrylate (NDDA) as a radiation vulcanization accelerator (RVA) for natural rubber latex (NRL) was investigated. Both gamma rays and electron beam (EB) were used for vulcanizing NRL with NDDA. The radiation dose of gamma rays, concentration of NDDA required to vulcanize the latex were optimized. 20 kGy radiation dose of gamma rays and 5 phr concentration of NDDA were found optimum to get maximum tensile and related properties. NRL was vulcanized under EB to find out the optimum condition of irradiation with this RVA. The defoamer concentrations, length of irradiation time under EB, concentration of RVA were optimizer by changing various parameters of the EB machine with a constant set of the others. 0.2 phr defoamer concentration, 30 minutes irradiation time and 5 phr concentration of NDDA were found optimum for irradiation of NRL under the EB machine. Effect of low current and optimum volume of latex charged in the reaction vessel suitable for vulcanization at a time were found out. (author)

Model for Estimating Noise-Induced Hearing Loss Associated With Occupational Noise Exposure in a Specified US Navy Population

National Research Council Canada - National Science Library

Tufts, Jennifer; Weathersby, Paul K; Marshall, Lynne; Sachs, Felix

2007-01-01

This report details the initial steps in the development of a method for modeling the noise-induced hearing loss accrued by a population of Sailors exposed to high-level steady-state occupational noise...

Alterations in carbohydrates and the protein metabolism of the harmful freshwater vector snail Lymnaea acuminata induced by the Euphorbia tirucalli latex extract.

Science.gov (United States)

Tiwari, Sudhanshu; Singh, A

2005-11-01

To know the short- as well as long-term effect of aqueous latex extracts of Euphorbia tirucalli on carbohydrate and protein metabolism, the snail Lymnaea acuminata was exposed to sublethal doses of 0.37 and 0.55 mg/L for a 24-h and 0.20 and 0.31 mg/L for a 96-h exposure period. Significant (P<0.05) alterations in the glycogen, pyruvate, lactate, total protein, and free amino acid level, as well as in the activity of enzyme lactic dehydrogenase, succinic dehydrogenase, cytochrome oxidase, protease, aspartate aminotransaminase, and alanine aminotransaminase were observed in the nervous, hepatopancreatic, and ovotestis tissues of the freshwater vector snail L. acuminata exposed to sublethal doses of E. tirucalli latex extract. The alterations in all biochemical parameters were significantly (P<0.05) time and dose dependent. After the 7th day of the withdrawal of treatment, there was significant (P<0.05) recovery in glycogen, pyruvate, lactate, total protein, and the free amino acid level and in the activity of the lactic dehydrogenase, succinic dehydrogenase, cytochrome oxidase, protease, aspartate aminotransaminase and alanine aminotransaminase enzymes in all three of the studied tissues of the snail, which supports the view that the plant product is safe for use as a molluscicide for the control of harmful freshwater vector snails in the aquatic environment.

Differences by Ending Rounds and Other Rounds in Time-Motion Analysis of Mixed Martial Arts: Implications for Assessment and Training.

Science.gov (United States)

Miarka, Bianca; Brito, Ciro J; Moreira, Danilo G; Amtmann, John

2018-02-01

Miarka, B, Brito, CJ, Moreira, DG, and Amtmann, J. Differences by ending rounds and other rounds in time-motion analysis of mixed martial arts: implications for assessment and training. J Strength Cond Res 32(2): 534-544, 2018-This study aimed to support training program development through the comparison of performance analysis of professionals mixed martial art (MMA) athletes in the bouts that were not finished by points. Using digital recordings of each bout, we analyzed 1,564 rounds (678 bouts) which were separated by ending and other rounds. Our results indicated that knockout/technical knockout is the main outcome that defines the ending round (≈60%); however, there is a higher frequency of ending by submission on the first and second rounds (>30%). Bouts ending during the first or second rounds had shorter total time and standing combat with low intensity than ending in the third round (91.5 ± 71.4, 93.4 ± 67.5, and 143.2 ± 87.4; for low intensity in the first, second, and third rounds, respectively; p ≤ 0.05), whereas standing combat time with high intensity was longer in the last round in comparison to bouts that finished in the first or second rounds (7.4 ± 9.2, 9.7 ± 18.0, and 17.7 ± 29.1 for high intensity in the first, second, and third rounds, respectively; p ≤ 0.05). The lower time dedicated to low-intensity stand-up combat actions, regardless of round, and forcefulness of the actions in groundwork in the first and second rounds seem to be elements that increase the probability of success in professional MMA bouts; these factors have essential implications related to training program design.

Radiation vulcanised natural rubber latex (RVNRL) market and challenges

International Nuclear Information System (INIS)

Wan Manshol Wan Zin; Najib Mohamad Zakey; Chai Chee Keong

2000-01-01

RVNRL has the required properties and proven useful for the manufacturing of examination gloves, balloons and finger cots at industrial scale. To date only RVNRL finger cots are available in the market. Problems and challenges for the market of other products are identified. Further success in the on going research activities will be the reference for more applications of RVNRL in the relevant industry to produce natural rubber latex products of more competitive values

Developing non-technical ward-round skills.

Science.gov (United States)

Harvey, Rachel; Mellanby, Edward; Dearden, Effie; Medjoub, Karima; Edgar, Simon

2015-10-01

Conducting clinical 'rounds' is one of the most onerous and important duties that every junior doctor is expected to perform. There is evidence that newly qualified doctors are not adequately prepared by their undergraduate experiences for this task. The aim of this study was to analyse the challenges pertaining to non-technical skills that students would face during ward rounds, and to create a model that facilitates the transition from medical student to doctor. A total of 217 final-year medical students completed a simulated ward round. Free-text responses were analysed using template analysis applying an a priori template developed from the literature by the research team. This drew on the generic categories of non-technical skills suggested by Flin et al. Ninety-seven per cent of students agreed or strongly agreed that the simulated ward round improved their insight into the challenges of ward rounds and their perceived ability to work efficiently as an active member of the ward round. The responding students (206) submitted written feedback describing the learning that they planned to use: 800 learning points were recorded, and all could be categorised into one of seven non-technical skills. Conducting clinical 'rounds' is one of the most onerous and important duties that every junior doctor is expected to perform We believe that improved task efficiency and insight into the challenges of the ward round gained by medical students will lead to an enhancement in performance during clinical rounds, and will have a positive impact on patient safety. We would suggest that undergraduate medical schools consider this model in the preparation for the clinical practice element of the curriculum. © 2015 John Wiley & Sons Ltd.

Implementing iRound: A Computer-Based Auditing Tool.

Science.gov (United States)

Brady, Darcie

Many hospitals use rounding or auditing as a tool to help identify gaps and needs in quality and process performance. Some hospitals are also using rounding to help improve patient experience. It is known that purposeful rounding helps improve Hospital Consumer Assessment of Healthcare Providers and Systems scores by helping manage patient expectations, provide service recovery, and recognize quality caregivers. Rounding works when a standard method is used across the facility, where data are comparable and trustworthy. This facility had a pen-and-paper process in place that made data reporting difficult, created a silo culture between departments, and most audits and rounds were completed differently on each unit. It was recognized that this facility needed to standardize the rounding and auditing process. The tool created by the Advisory Board called iRound was chosen as the tool this facility would use for patient experience rounds as well as process and quality rounding. The success of the iRound tool in this facility depended on several factors that started many months before implementation to current everyday usage.

Study of the effect of ionizing radiation on the structure of natural rubber latex by positron annihilation technique

International Nuclear Information System (INIS)

Lopez Saldana, I.R.

1993-01-01

At the present research, were studied the changes in natural rubber latex structure, due to electron beam by a 3 MeV, 25 m A Dynamitron electron accelerator. The natural rubber latex was irradiated at 30, 40 and 50 kGy/s dose rate, over a total dose range from 150 to 250 kGy, for each dose rate used. From natural rubber latex irradiated films were prepared by casting with 0.7 mm. thickness. In the main part, the study was made by positron annihilation lifetime (PAL), this technique is unique in the determination of free-volume properties due to the fact that positronium atom (Ps) is found to be preferentially localized in the free-volume region of polymeric materials. The positron lifetime measurements were performing using a gamma-gamma coincidence system. These results were analyzed by PATFIT-88 program computer into three components, the long-lived component for orthopositronium (o-Ps) with parameters lifetime (τ 3 ) and formation intensity (I 3 ), were plotted and analyzed for each dose rate and total dose used. Besides with τ 3 were calculated the mean free-volume size based on the spherical model for the free-volume bubble, found that the free-volume decrease slightly with the total dose due to the crosslinking of natural rubber latex. Besides was studied the effect of dose rate on tensile strength, the tensile strength is increased with the total dose although there was not a clear effect due to the dose rate. Also the films were subjected to aging in order to determined the thermal stability of natural rubber latex irradiated, the results show that the films have good stability. Besides was used the infrared spectroscopy to determine the changes due to the crosslinking by variations in the characteristically absorption bands for cis 1,4-polyisoprene. (Author)

Gloves against mineral oils and mechanical hazards: composites of carboxylated acrylonitrile-butadiene rubber latex.

Science.gov (United States)

Krzemińska, Sylwia; Rzymski, Władysław M; Malesa, Monika; Borkowska, Urszula; Oleksy, Mariusz

2016-09-01

Resistance to permeation of noxious chemical substances should be accompanied by resistance to mechanical factors because the glove material may be torn, cut or punctured in the workplace. This study reports on glove materials, protecting against mineral oils and mechanical hazards, made of carboxylated acrylonitrile-butadiene rubber (XNBR) latex. The obtained materials were characterized by a very high resistance of the produced materials to oil permeation (breakthrough time > 480 min). The mechanical properties, and especially tear resistance, of the studied materials were improved after the addition of modified bentonite (nanofiller) to the XNBR latex mixture. The nanocomposite meets the requirements in terms of parameters characterizing tear, abrasion, cut and puncture resistance. Therefore, the developed material may be used for the production of multifunctional protective gloves.

Association between occupational exposure to arsenic and neurological, respiratory and renal effects

International Nuclear Information System (INIS)

Halatek, Tadeusz; Sinczuk-Walczak, Halina; Rabieh, Sasan; Wasowicz, Wojciech

2009-01-01

Occupational exposure by inhalation in copper smelter is associated with several subclinical health phenomena. The respiratory tract is usually involved in the process of detoxication of inhaled noxious agents which, as arsenic, can act as inductors of oxidative stress (Lantz, R.C., Hays, A.M., 2006. Role of oxidative stress in arsenic-induced toxicity. Drug Metab. Rev. 38, 791-804). It is also known that irritating fumes affect distal bronchioles of non-ciliated, epithelial Clara cells, which secrete anti-inflammatory and immunosuppressive Clara cell protein (CC16) into the respiratory tract. The study group comprised 39 smelters employed at different workplaces in a copper foundry, matched for age and smoking habits with the control group (n = 16). Subjective neurological symptoms (SNS), visual evoked potentials (VEP), electroneurographic (EneG) and electroencephalographic (EEG) results were examined in the workers and the relationships between As concentration in the air (As-Air) and urine (As-U) were assessed. Effects of exposure were expressed in terms of biomarkers: CC16 as early pulmonary biomarker and β 2 -microglobulin (β 2 M) in urine and serum and retinol binding protein (RBP) as renal markers, measured by sensitive latex immunoassay. The concentrations of arsenic exceeded about two times the Threshold Limit Values (TLV) (0.01 mg/m 3 ). The contents of lead did not exceed the TLV (0.05 mg/m 3 ). Low CC16 levels in serum (12.1 μg/l) of workers with SNS and VEP symptoms and highest level As-U (x a 39.0 μg/l) were noted earliest in relation to occupational time. Moreover, those effects were associated with increased levels of urinary and serum β 2 M and urinary RBP. Results of our study suggested the initiative key role of oxidative stress in triggering the processes that eventually lead to the subclinical effects of arsenic on the nervous system.

Natural background radiation induces cytogenetic radioadaptive response more effectively than occupational exposure in human peripheral blood lymphocytes

International Nuclear Information System (INIS)

Monfared, A.S.; Mozdarani, H.; Amiri, M.

2003-01-01

Ramsar, a city in the northern Iran, has the highest level of natural background radiation in the world. It has been clearly shown that low doses of ionising radiation can induce resistance to subsequent higher exposures. This phenomenon is termed radioadaptive response. We have compared induction of cytogenetic radioadaptive response by High Natural Background Radiation (HNBR) in Ramsar and X-ray occupational exposure as conditioning doses in human peripheral blood lymphocytes. 30 healthy control individuals, living in Ramsar but in normal background radiation areas, 15 healthy individuals from Talesh Mahalleh, a region with extraordinary high level of background radiation, and 7 X-ray radiographers working in Ramsar hospital located in normal natural background ionising radiation area were evaluated. Peripheral blood samples were prepared and exposed to challenge dose of 0 and 2 Gy. Lymphocytes were scored using analysis of metaphase, for the presence of chromosomal aberrations. An adaptive response was observed in HNBR and radiation workers groups in comparison with sham controls. A significant increase in adaptive response was observed in the HNBR group if compared with the occupationally exposed group. These findings indicate that both natural background radiation and occupational exposure could induce cytogenetic radioadaptive response and it is more significant regarding to natural background ionising radiation. (author)

Costs and return analysis in rubber latex production in Edo State ...

African Journals Online (AJOL)

The study examined the costs and return analysis in rubber latex production in Edo Sate, Nigeria. Multi-stage sampling method was adopted to select 96 smallholder rubber framers for the study. The first stage was a purposive sampling of two LGAs and then simple random sampling of 6 villages each from the two LGA.

Synthesis of polymer hybrid latex poly(methyl methacrylate-co-butyl acrylate) with organo montmorillonite via miniemulsion polymerization method for barrier paper

Science.gov (United States)

Chanra, J.; Budianto, E.; Soegijono, B.

2018-03-01

Hybrid polymer latex based on combination of organic-inorganic materials, poly(methyl methacrylate-co-butyl acrylate) (PMMBA) and organo-montmorillonite (OMMT) were synthesized via miniemulsion polymerization technique. Modification of montmorillonite (MMT) through the incorporation of myristyltrimethylammonium bromide (MTAB) into the clay’s interlayer spaces were investigated by Small-Angle X-ray Scattering (SAXS), Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA) and Transmission Electron Microscopy (TEM). Barrier property and thermal stability of polymer latex film sample were investigated through its Water Vapor Transmission Rate (WVTR) and Thermogravimetric Analysis (TGA). The results indicated that addition of OMMT as filler in PMMBA increased the barrier property and thermal stability of the latex film. Addition of 8.0% (wt) OMMT increased the barrier property and thermal stability. Miniemusion polymerization process with higher addition (>8.0 wt%) of OMMT resulting in high latex viscosity, particle size, and high amount of coagulum. The utilization of this hybrid polymer could benefits paper and board industries to produce high quality barrier paper for food packaging.

Caracterização da hipersensibilidade a luvas de látex em profissionais da odontologia = Rubber latex gloves hypersensitivities in dental workers

Directory of Open Access Journals (Sweden)

Flávia Sukekava

2007-01-01

Full Text Available As reações alérgicas ao látex vêm aumentando em profissionais da saúde e se manifestam como um incômodo local ou sintomatologia sistêmica. Para conhecer a freqüência das manifestações alérgicas nos usuários de luvas de látex foi realizada busca entre os profissionais da odontologia via aplicação de questionários. Foram aplicados 450questionários e, dentre os respondedores (140, 19% relataram manifestar reações locais ao contato com as luvas de látex e 5% reações sistêmicas a outros produtos de látex. Cerca de 2,5% declararam dermatite de contato e reações sistêmicas (anafiláticas, 1,5% apenas dermatite de contato e 1% sintomas de anafilaxia ao uso das luvas. Vinte por cento dos profissionais atenderam pacientes com alergia ao látex e 29% declararam questionar, durante a anamnese, a respeito de alergia ao látex. As reações alérgicas a luvas de látex foram freqüentes e é objeto de preocupação entre os profissionais da odontologia.Allergic reactions to natural rubber latex have increased in dental practice affecting both the professional and the patients. Allergic reactions may range from skin disease to asthma and anaphylaxis. This study aimed at determining the incidence of latex gloves allergy amongdental care workers. 450 allergy questionnaires were used to collect information on latex gloves reactions and 140 dental works answered them. Latex gloves reaction occurred in 19% of them and 5% reported allergic reactions to other latex products. 2.5% reported symptoms suggesting contact dermatitis and anaphylaxis hypersensitivities, 1.5% contact dermatitis, and 1% reported anaphylaxis symptoms when wearing them. 20% of them had patients who presented symptoms suggestive of anaphylaxis hypersensitivity to rubber gloves latex. Our study confirms that rubber latex gloves reactions are frequent among dental care workers, and dentists must be aware of the latex allergy in dental practice.

Identifying educational priorities for occupational therapy students to prepare for mental health practice in Australia and New Zealand: Opinions of practising occupational therapists.

Science.gov (United States)

Scanlan, Justin Newton; Pépin, Geneviève; Haracz, Kirsti; Ennals, Priscilla; Webster, Jayne S; Meredith, Pamela J; Batten, Rachel; Bowman, Siann; Bonassi, Marianne; Bruce, Rosie

2015-10-01

The effective preparation of occupational therapy students for mental health practice is critical to facilitate positive consumer outcomes, underpin optimal practice and support new graduates' professional identity. This project was established to determine a set of 'educational priorities' for occupational therapy students to prepare them for current (and future) entry-level practice in mental health, from the perspective of mental health occupational therapists in Australia and New Zealand. The study included two phases. In Phase One, participants identified what they considered to be important educational priorities for occupational therapy students to prepare them for practice in mental health. For Phase Two, an 'expert panel' was assembled to review and rank these using a Policy Delphi approach. Eighty-five participants provided educational priorities in Phase One. These were grouped into a total of 149 educational themes. In Phase Two, the expert panel (consisting of 37 occupational therapists from diverse locations and practice settings) prioritised these themes across three Delphi rounds. A final priority list was generated dividing educational themes into three prioritised categories: 29 'Essential', 25 'Important' and 44 'Optional' priorities. Highest-ranked priorities were: clinical reasoning, client-centred practice, therapeutic use of self, functional implications of mental illness, therapeutic use of occupation and mental health fieldwork experience. The priority list developed as part of this project provides additional information to support the review of occupational therapy curricula across Australia and New Zealand to ensure that new graduates are optimally prepared for mental health practice. © 2015 Occupational Therapy Australia.

A self-cleaning coating based on commercial grade polyacrylic latex modified by TiO2/Ag-exchanged-zeolite-A nanocomposite

Science.gov (United States)

Nosrati, Rahimeh; Olad, Ali; Nofouzi, Katayoon

2015-08-01

The commercial grade polyacrylic latex was modified in order to prepare a self-cleaning coating. TiO2/Ag-exchanged-zeolite-A nanocomposite was prepared and used as additive in the matrix of polyacrylic latex to achieve a hydrophilic and photocatalytic coating. FTIR and UV-visible spectroscopy, X-ray diffraction patterns and FESEM were used to characterize the composition and structure of the nanocomposites and coatings. The acrylic coatings, were prepared by using of TiO2/Ag-exchanged-zeolite-A additive, had better UV and visible light absorption, hydrophilic, degradation of organic pollutants, stability in water and antimicrobial properties than pristine commercial grade polyacrylic latex coating. According to the results, the modified polyacrylic based coating containing 0.5 wt% of TiO2/Ag-exchanged-zeolite-A nanocomposite additive with TiO2 to Ag-exchanged-zeolite-A ratio of 1:2 was the best coating considering most of useful properties such as small band gap and low water contact angle. The water contact angle for unmodified polyacrylic latex coating was 68° which was decreased to less than 10° in modified coating after 24 h LED lamp illumination.

Rounding behavior in the reporting of headache frequency complicates headache chronification research.

Science.gov (United States)

Houle, Timothy T; Turner, Dana P; Houle, Thomas A; Smitherman, Todd A; Martin, Vincent; Penzien, Donald B; Lipton, Richard B

2013-06-01

To characterize the extent of measurement error arising from rounding in headache frequency reporting (days per month) in a population sample of headache sufferers. When reporting numerical health information, individuals tend to round their estimates. The tendency to round to the nearest 5 days when reporting headache frequency can distort distributions and engender unreliability in frequency estimates in both clinical and research contexts. This secondary analysis of the 2005 American Migraine Prevalence and Prevention study survey characterized the population distribution of 30-day headache frequency among community headache sufferers and determined the extent of numerical rounding ("heaping") in self-reported data. Headache frequency distributions (days per month) were examined using a simplified version of Wang and Heitjan's approach to heaping to estimate the probability that headache sufferers round to a multiple of 5 when providing frequency reports. Multiple imputation was used to estimate a theoretical "true" headache frequency. Of the 24,000 surveys, headache frequency data were available for 15,976 respondents diagnosed with migraine (68.6%), probable migraine (8.3%), or episodic tension-type headache (10.0%); the remainder had other headache types. The mean number of headaches days/month was 3.7 (standard deviation = 5.6). Examination of the distribution of headache frequency reports revealed a disproportionate number of responses centered on multiples of 5 days. The odds that headache frequency was rounded to 5 increased by 24% with each 1-day increase in headache frequency (odds ratio: 1.24, 95% confidence interval: 1.23 to 1.25), indicating that heaping occurs most commonly at higher headache frequencies. Women were more likely to round than men, and rounding decreased with increasing age and increased with symptoms of depression. Because of the coarsening induced by rounding, caution should be used when distinguishing between episodic and chronic

Choroidal Round Hyporeflectivities in Geographic Atrophy.

Directory of Open Access Journals (Sweden)

Eleonora Corbelli

Full Text Available In geographic atrophy (GA, choroidal vessels typically appear on structural optical coherence tomography (OCT as hyperreflective round areas with highly reflective borders. We observed that some GA eyes show choroidal round hyporeflectivities with highly reflective borders beneath the atrophy, and futher investigated the charcteristcs by comparing structural OCT, indocyanine green angiography (ICGA and OCT angiography (OCT-A.Round hyporeflectivities were individuated from a pool of patients with GA secondary to non-neovascular age-related macular degeneration consecutively presenting between October 2015 and March 2016 at the Medical Retina & Imaging Unit of the University Vita-Salute San Raffaele. Patients underwent a complete ophthalmologic examination including ICGA, structural OCT and OCT-A. The correspondence between choroidal round hyporeflectivities beneath GA on structural OCT and ICGA and OCT-A imaging were analyzed.Fifty eyes of 26 consecutive patients (17 females and 9 males; mean age 76.8±6.2 years with GA were included. Twenty-nine round hyporeflectivities have been found by OCT in choroidal layers in 21 eyes of 21 patients (42.0%; estimated prevalence of 57.7%. All 29 round hyporeflectivities showed constantly a hyperreflective border and a backscattering on structural OCT, and appeared as hypofluorescent in late phase ICGA and as dark foci with non detectable flow in the choroidal segmentation of OCT-A. Interestingly, the GA area was greater in eyes with compared to eyes without round hyporeflectivities (9.30±5.74 and 5.57±4.48mm2, respectively; p = 0.01.Our results suggest that most round hyporeflectivities beneath GA may represent non-perfused or hypo-perfused choroidal vessels with non-detectable flow.

Choroidal Round Hyporeflectivities in Geographic Atrophy.

Science.gov (United States)

Corbelli, Eleonora; Sacconi, Riccardo; De Vitis, Luigi Antonio; Carnevali, Adriano; Rabiolo, Alessandro; Querques, Lea; Bandello, Francesco; Querques, Giuseppe

2016-01-01

In geographic atrophy (GA), choroidal vessels typically appear on structural optical coherence tomography (OCT) as hyperreflective round areas with highly reflective borders. We observed that some GA eyes show choroidal round hyporeflectivities with highly reflective borders beneath the atrophy, and futher investigated the charcteristcs by comparing structural OCT, indocyanine green angiography (ICGA) and OCT angiography (OCT-A). Round hyporeflectivities were individuated from a pool of patients with GA secondary to non-neovascular age-related macular degeneration consecutively presenting between October 2015 and March 2016 at the Medical Retina & Imaging Unit of the University Vita-Salute San Raffaele. Patients underwent a complete ophthalmologic examination including ICGA, structural OCT and OCT-A. The correspondence between choroidal round hyporeflectivities beneath GA on structural OCT and ICGA and OCT-A imaging were analyzed. Fifty eyes of 26 consecutive patients (17 females and 9 males; mean age 76.8±6.2 years) with GA were included. Twenty-nine round hyporeflectivities have been found by OCT in choroidal layers in 21 eyes of 21 patients (42.0%; estimated prevalence of 57.7%). All 29 round hyporeflectivities showed constantly a hyperreflective border and a backscattering on structural OCT, and appeared as hypofluorescent in late phase ICGA and as dark foci with non detectable flow in the choroidal segmentation of OCT-A. Interestingly, the GA area was greater in eyes with compared to eyes without round hyporeflectivities (9.30±5.74 and 5.57±4.48mm2, respectively; p = 0.01). Our results suggest that most round hyporeflectivities beneath GA may represent non-perfused or hypo-perfused choroidal vessels with non-detectable flow.

NMR relaxation times of natural rubber latex

International Nuclear Information System (INIS)

Harun, S.; Aziz, H.; Basir, Z.

1994-01-01

NMR relaxation times T sub 1 and T sub 2 of natural rubber latex have been measured at 25 degree C on a pulsed NMR spectrometer. The work focuses on the variation of the relaxation times with the amount of water content from 0% to 50%. The water content was adjusted by centrifuging and removing a certain amount of water from the sample. The data were analysed using a biexponential fitting procedure which yields simultaneously either T sub 1a and T sub 1b or T sub 2a and T sub 2b. The amount of solid was compared with the known amount of dry rubber content

[UV-irradiation-induced skin cancer as a new occupational disease].

Science.gov (United States)

Diepgen, T L; Drexler, H; Elsner, P; Schmitt, J

2015-03-01

With the revision of the German Ordinance on Occupational Diseases, skin cancer due to UV irradiation was amended as a new occupational disease to the list of occupational diseases in Germany. The new occupational disease BK 5103 has the following wording: "Squamous cell carcinoma or multiple actinic keratosis of the skin caused by natural UV irradiation". Actinic keratoses are to be considered as multiple according to this new occupational diseases if they occur as single lesions of more than five annually, or are confluent in an area > 4 cm(2) (field cancerization). It is estimated that more than 2.5 million employees are exposed to natural UV irradiation due to their work (outdoor workers) in Germany and therefore have an increased risk of skin cancer. In this article the medical and technical prerequisites which have to be fulfilled for this new occupational disease in Germany are introduced.

Proteomic profiling of occupational medicamentosa-like dermatitis induced by trichloroethylene in serum based on MALDI-TOF MS.

Science.gov (United States)

Liu, Wei; Hong, Wen-Xu; Zhang, Yanfang; Huang, Peiwu; Yang, Xifei; Ren, Xiaohu; Huang, Haiyan; Liu, Jianjun

2015-11-01

Trichloroethylene (TCE) has long been well known as a major pollutant that affects both occupational and general environments. Occupational medicamentosa-like dermatitis induced by TCE (OMLDT) is an autoimmune disease, which has become one of the critical occupational health issues in China. In this study, we analyzed 18 OMLDT patients and 29 professional TCE contact people on serum proteomic analysis by matrix-assisted laser desorption ionization time-of-flight mass spectrometry and ClinProTools bioinformatics software. The intensities of 35 protein/peptide peaks were significantly different between TCE contact controls and OMLDT patients. A pattern of six peaks (m/z 1,450.33, 1,866.16, 3,262.39, 4,109.55, 5,064.85 and 5,956.57) were selected to construct a diagnostic model to discriminate the OMLDT patients from controls with sensitivity and specificity of both 93.8 %. Our findings provide an alternative proteomic approach to differentiate the OMLDT patients from TCE contact workers with high sensitivity and high specificity, which will be of potential value in clinical diagnosis for occupational disease.

A self-cleaning coating based on commercial grade polyacrylic latex modified by TiO2/Ag-exchanged-zeolite-A nanocomposite

International Nuclear Information System (INIS)

Nosrati, Rahimeh; Olad, Ali; Nofouzi, Katayoon

2015-01-01

Graphical abstract: - Highlights: • A novel nanocomposite coating based on polyacrylic was prepared. • Nanostructured TiO 2 /Ag-exchanged-zeolite-A composite material was prepared. • Prepared nanocomposite used as additive for modification of polyacrylic latex. • Modified coatings show self-cleaning and antibacterial properties. • Modified coatings show better stability in water in versus of unmodified polymer. - Abstract: The commercial grade polyacrylic latex was modified in order to prepare a self-cleaning coating. TiO 2 /Ag-exchanged-zeolite-A nanocomposite was prepared and used as additive in the matrix of polyacrylic latex to achieve a hydrophilic and photocatalytic coating. FTIR and UV–visible spectroscopy, X-ray diffraction patterns and FESEM were used to characterize the composition and structure of the nanocomposites and coatings. The acrylic coatings, were prepared by using of TiO 2 /Ag-exchanged-zeolite-A additive, had better UV and visible light absorption, hydrophilic, degradation of organic pollutants, stability in water and antimicrobial properties than pristine commercial grade polyacrylic latex coating. According to the results, the modified polyacrylic based coating containing 0.5 wt% of TiO 2 /Ag-exchanged-zeolite-A nanocomposite additive with TiO 2 to Ag-exchanged-zeolite-A ratio of 1:2 was the best coating considering most of useful properties such as small band gap and low water contact angle. The water contact angle for unmodified polyacrylic latex coating was 68° which was decreased to less than 10° in modified coating after 24 h LED lamp illumination

Required competencies of occupational physicians: a Delphi survey of UK customers.

Science.gov (United States)

Reetoo, K N; Harrington, J M; Macdonald, E B

2005-06-01

Occupational physicians can contribute to good management in healthy enterprises. The requirement to take into account the needs of the customers when planning occupational health services is well established. To establish the priorities of UK employers, employees, and their representatives regarding the competencies they require from occupational physicians; to explore the reasons for variations of the priorities in different groups; and to make recommendations for occupational medicine training curricula in consideration of these findings. This study involved a Delphi survey of employers and employees from public and private organisations of varying business sizes, and health and safety specialists as well as trade union representatives throughout the UK. It was conducted in two rounds by a combination of computer assisted telephone interview (CATI) and postal survey techniques, using a questionnaire based on the list of competencies described by UK and European medical training bodies. There was broad consensus about the required competencies of occupational physicians among the respondent subgroups. All the competencies in which occupational physicians are trained were considered important by the customers. In the order of decreasing importance, the competencies were: Law and Ethics, Occupational Hazards, Disability and Fitness for Work, Communication, Environmental Exposures, Research Methods, Health Promotion, and Management. The priorities of customers differed from previously published occupational physicians' priorities. Existing training programmes for occupational physicians should be regularly reviewed and where necessary, modified to ensure that the emphasis of training meets customer requirements.

Case report of occupational asthma induced by polyvinyl chloride and nickel.

Science.gov (United States)

Song, Ga-Won; Ban, Ga-Young; Nam, Young-Hee; Park, Hae-Sim; Ye, Young-Min

2013-10-01

Polyvinyl chloride (PVC) is a widely used chemical for production of plastics. However occupational asthma (OA) caused by PVC has been reported only rarely. We report a 34-yr-old male wallpaper factory worker with OA due to PVC and nickel (Ni) whose job was mixing PVC with plasticizers. He visited the emergency room due to an asthma attack with moderate airflow obstruction and markedly increased sputum eosinophil numbers. A methacholine challenge test was positive (PC20 2.5 mg/mL). Bronchoprovocation tests with both PVC and Ni showed early and late asthmatic responses, respectively. Moreover, the fractional concentration of exhaled nitric oxide (FeNO) was increased after challenge with PVC. To our knowledge, this is the first case of OA in Korea induced by exposure to both PVC and Ni. We suggest that eosinophilic inflammation may be involved in the pathogenesis of PVC-induced OA and that FeNO monitoring can be used for its diagnosis.

Preliminary Investigation into Tree Dryness in Hevea brasiliensis (Wild. Ex Adr. De Juss Muell. Arg. by Path Analysis of Tree Dryness and Latex Parameters

Directory of Open Access Journals (Sweden)

Omokhafe, KO.

2001-01-01

Full Text Available The correlative path analysis between tree dryness and four latex parameters was studied in eleven clones of Hevea brasiliensis. The latex parameters used for evaluation were initial volume, initial flow rate, final volume and plugging index with tree dryness as the dependent factor. Estimates of direct and indirect effects of each of the latex parameters on tree dryness were calculated through linear correlation and path analysis. The correlation coefficient between initial volume and initial flow rate was 1.00 and both characters had the same correlation coefficients with other latex parameters and tree dryness. This implies that initial volume and initial flow rate are alternatives for evaluation of correlation between latex parameters and tree dryness. There was significant correlation between initial volume, initial flow rate and tree dryness at V = -0.52 and high indirect effect of initial volume and initial flow rate through final volume. In addition, despite the low correlation coefficient of V = -0.20 between final volume and tree dryness, the direct effect of final volume on tree dryness was high at 0.812. Final volume is therefore an important factor in the incidence of tree dryness.

Positioning a thin-wall round wrapper within a heavy wall out-of-round shell of a heat exchanger

International Nuclear Information System (INIS)

Hargrove, H.G.; Thompson, E.G.; Bayless, J.R.

1983-01-01

A thin-wall, generally round wrapper is installed within a heavy wall, rolled heat exchanger shell which has greater out-of-round tolerances than the wrapper and the wrapper is maintained in its round state by utilizing a plurality of jacks disposed adjacent spaced tube support plates within the wrapper. (author)

Antimalarial Activity of the Chemical Constituents of the Leaf Latex of Aloe pulcherrima Gilbert and Sebsebe.

Science.gov (United States)

Teka, Tekleab; Bisrat, Daniel; Yeshak, Mariamawit Yonathan; Asres, Kaleab

2016-10-28

Malaria is one of the three major global public health threats due to a wide spread resistance of the parasites to the standard antimalarial drugs. Considering this growing problem, the ethnomedicinal approach in the search for new antimalarial drugs from plant sources has proven to be more effective and inexpensive. The leaves of Aloe pulcherrima Gilbert and Sebsebe, an endemic Ethiopian plant, are locally used for the treatment of malaria and other infectious diseases. Application of the leaf latex of A. pulcherrima on preparative silica gel TLC led to the isolation of two C -glycosylated anthrones, identified as nataloin ( 1 ) and 7-hydroxyaloin ( 2 ) by spectroscopic techniques (UV, IR, ¹H- and 13 C-NMR, HR-ESIMS). Both the latex and isolated compounds displayed antimalarial activity in a dose-independent manner using a four-day suppressive test, with the highest percent suppression of 56.2% achieved at 200 mg/kg/day for 2 . The results indicate that both the leaf latex of A. pulcherrima and its two major constituents are endowed with antiplasmodial activities, which support the traditional use of the leaves of the plant for the treatment of malaria.

Uniaxial Strain Induced Critical Current Degradation of Ag-Sheathed Bi-2212 Round Wire

NARCIS (Netherlands)

Dai, Chao; Qin, Jinggang; Liu, Bo; Liu, Peihang; Wu, Yu; Nijhuis, Arend; Zhou, Chao; Li, Chenshan; Hao, Qingbin; Liu, Sheng

2018-01-01

The critical current degradation of Bi-2212 Ag-sheathed round wire subjected to uniaxial strain was studied at 4.2 K in 14 T background field. The strains applied on the sample are both tension and compression. The additional tensile strain caused by the difference in thermal expansion between the

Calotropis procera -induced keratitis

Directory of Open Access Journals (Sweden)

Pandey Nidhi

2009-01-01

Full Text Available Calotropis procera produces copious amounts of latex, which has been shown to possess several pharmacological properities. Its local application produces intense inflammatory response. In the 10 cases of Calotropis procera -induced keratitis reported here, the clinical picture showed corneal edema with striate keratopathy without any evidence of intraocular inflammation. The inflammation was reversed by the local application of steroid drops.

A latex metabolite benefits plant fitness under root herbivore attack

OpenAIRE

Huber, M.; Epping, J.; Gronover, C.S.; Fricke, J.; Aziz, Z.; Brillatz, T.; Swyers, M.; Köllner, T.G.; Vogel, H.; Hammerbacher, A.; Triebwasser-Freese, D.; Robert, C.A.M.; Verhoeven, K.; Preite, V.; Gershenzon, J.

2016-01-01

Plants produce large amounts of secondary metabolites in their shoots and roots and store them in specialized secretory structures. Although secondary metabolites and their secretory structures are commonly assumed to have a defensive function, evidence that they benefit plant fitness under herbivore attack is scarce, especially below ground. Here, we tested whether latex secondary metabolites produced by the common dandelion (Taraxacum officinale agg.) decrease the performance of its major n...

Virtual radiology rounds: adding value in the digital era

International Nuclear Information System (INIS)

Fefferman, Nancy R.; Strubel, Naomi A.; Prithiani, Chandan; Chakravarti, Sujata; Caprio, Martha; Recht, Michael P.

2016-01-01

To preserve radiology rounds in the changing health care environment, we have introduced virtual radiology rounds, an initiative enabling clinicians to remotely review imaging studies with the radiologist. We describe our initial experience with virtual radiology rounds and referring provider impressions. Virtual radiology rounds, a web-based conference, use remote sharing of radiology workstations. Participants discuss imaging studies by speakerphone. Virtual radiology rounds were piloted with the Neonatal Intensive Care Unit (NICU) and the Congenital Cardiovascular Care Unit (CCVCU). Providers completed a survey assessing the perceived impact and overall value of virtual radiology rounds on patient care using a 10-point scale. Pediatric radiologists participating in virtual radiology rounds completed a survey assessing technical, educational and clinical aspects of this methodology. Sixteen providers responded to the survey; 9 NICU and 7 CCVCU staff (physicians, nurse practitioners and fellows). Virtual radiology rounds occurred 4-5 sessions/week with an average of 6.4 studies. Clinicians rated confidence in their own image interpretation with a 7.4 average rating for NICU and 7.5 average rating for CCVCU. Clinicians unanimously rated virtual radiology rounds as adding value. NICU staff preferred virtual radiology rounds to traditional rounds and CCVCU staff supported their new participation in virtual radiology rounds. Four of the five pediatric radiologists participating in virtual radiology rounds responded to the survey reporting virtual radiology rounds to be easy to facilitate (average rating: 9.3), to moderately impact interpretation of imaging studies (average rating: 6), and to provide substantial educational value for radiologists (average rating: 8.3). All pediatric radiologists felt strongly that virtual radiology rounds enable increased integration of the radiologist into the clinical care team (average rating: 8.8). Virtual radiology rounds are a

Virtual radiology rounds: adding value in the digital era

Energy Technology Data Exchange (ETDEWEB)

Fefferman, Nancy R.; Strubel, Naomi A.; Prithiani, Chandan; Chakravarti, Sujata; Caprio, Martha; Recht, Michael P. [New York University School of Medicine, Department of Radiology, New York, NY (United States)

2016-11-15

To preserve radiology rounds in the changing health care environment, we have introduced virtual radiology rounds, an initiative enabling clinicians to remotely review imaging studies with the radiologist. We describe our initial experience with virtual radiology rounds and referring provider impressions. Virtual radiology rounds, a web-based conference, use remote sharing of radiology workstations. Participants discuss imaging studies by speakerphone. Virtual radiology rounds were piloted with the Neonatal Intensive Care Unit (NICU) and the Congenital Cardiovascular Care Unit (CCVCU). Providers completed a survey assessing the perceived impact and overall value of virtual radiology rounds on patient care using a 10-point scale. Pediatric radiologists participating in virtual radiology rounds completed a survey assessing technical, educational and clinical aspects of this methodology. Sixteen providers responded to the survey; 9 NICU and 7 CCVCU staff (physicians, nurse practitioners and fellows). Virtual radiology rounds occurred 4-5 sessions/week with an average of 6.4 studies. Clinicians rated confidence in their own image interpretation with a 7.4 average rating for NICU and 7.5 average rating for CCVCU. Clinicians unanimously rated virtual radiology rounds as adding value. NICU staff preferred virtual radiology rounds to traditional rounds and CCVCU staff supported their new participation in virtual radiology rounds. Four of the five pediatric radiologists participating in virtual radiology rounds responded to the survey reporting virtual radiology rounds to be easy to facilitate (average rating: 9.3), to moderately impact interpretation of imaging studies (average rating: 6), and to provide substantial educational value for radiologists (average rating: 8.3). All pediatric radiologists felt strongly that virtual radiology rounds enable increased integration of the radiologist into the clinical care team (average rating: 8.8). Virtual radiology rounds are a

Gloves against mineral oils and mechanical hazards: composites of carboxylated acrylonitrile–butadiene rubber latex

Science.gov (United States)

Krzemińska, Sylwia; Rzymski, Władysław M.; Malesa, Monika; Borkowska, Urszula; Oleksy, Mariusz

2016-01-01

Resistance to permeation of noxious chemical substances should be accompanied by resistance to mechanical factors because the glove material may be torn, cut or punctured in the workplace. This study reports on glove materials, protecting against mineral oils and mechanical hazards, made of carboxylated acrylonitrile–butadiene rubber (XNBR) latex. The obtained materials were characterized by a very high resistance of the produced materials to oil permeation (breakthrough time > 480 min). The mechanical properties, and especially tear resistance, of the studied materials were improved after the addition of modified bentonite (nanofiller) to the XNBR latex mixture. The nanocomposite meets the requirements in terms of parameters characterizing tear, abrasion, cut and puncture resistance. Therefore, the developed material may be used for the production of multifunctional protective gloves. PMID:26757889

Use of a latex biomembrane for bladder augmentation in a rabbit model: biocompatibility, clinical and histological outcomes

Directory of Open Access Journals (Sweden)

Andre L. A. Domingos

2009-04-01

Full Text Available PURPOSE: To investigate histological features and biocompatibility of a latex biomembrane for bladder augmentation using a rabbit model. MATERIAL AND METHODS: After a partial cystectomy, a patch of a non-vulcanized latex biomembrane (2x4 cm was sewn to the bladder with 5/0 monofilament polydioxanone sulfate in a watertight manner. Groups of 5 animals were sacrificed at 15, 45 and 90 days after surgery and the bladder was removed. The 5-µm preparations obtained from grafted area and normal bladder were stained with hematoxylin-eosin. Immunohistochemical staining was performed with a primary antibody against alpha-actin to assess muscle regeneration. RESULTS: No death, urinary leakage or graft extrusion occurred in any group. All bladders showed a spherical shape. Macroscopically, after 90 days, the latex biomembrane was not identifiable and the patch was indistinguishable from normal bladder. A bladder stone was found in one animal (6.6%. On the 90th day, histology revealed continuity of transitional epithelium of host bladder tissue on the patch area. At this time, the muscle layers were well organized in a similar fashion to native bladder muscle layers. The inflammatory process was higher on grafted areas when compared to controls: 15 days - p < 0.0001, 45 days - p < 0.001, and 90 days - p < 0.01. The anti alpha-actin immunoexpression peaked at 45 days, when the graft was observed covered by muscle cells. CONCLUSION: The latex biomembrane is biocompatible and can be used in models for bladder augmentation in rabbits. It promotes epithelium and muscle regeneration without urinary leakage.

Irradiation grafting of natural rubber latex with maleic anhydride and its compatibilization of poly(lactic acid)/natural rubber blends

Science.gov (United States)

Pongsathit, Siriwan; Pattamaprom, Cattaleeya

2018-03-01

Maleic anhydride (MA) is an interesting monomer to be grafted onto natural rubber(NR) due to its potential as a compatibilizer of hydrophobic rubbers and polymers with higher polarity. So far, radiation grafting of MA onto NR in latex state has not been reported. In this study, the grafting of NR with MA in latex state was investigated by exposing the latex to cobalt-60 gamma irradiation at a fixed MA content of 9% and a varied absorbed doses from 2 to 10 kGy. The FTIR spectrometer, 1H NMR spectrometer and gel content analysis have confirmed successful grafting of MA onto NR after irradiation. The grafted NRs were then used to increase the compatibility and the impact property of PLA/NR blends. It was found that the highest impact strength of the blends was achieved when the grafting was carried out at the absorbed dose of 4 kGy.

In the Round: Supporting Teachers' Authentic Professional Learning

Science.gov (United States)

Strand, Matt

2013-01-01

This is a study of teachers' authentic professional learning at a public school in Poudre School District in northern Colorado. At Polaris Expeditionary Learning School, teachers and administrators have developed a form of school-based instructional rounds referred to herein as PLC rounds (professional learning community rounds). In PLC rounds,…

[A cohort study on occupational noise induced hearing loss in workers at an iron and steel plant].

Science.gov (United States)

Yu, S F; Chen, G S; Jiao, J; Gu, G Z; Zhang, H L; Wang, X M; Zhou, W H; Wu, H; Li, Y H; Zheng, Y X

2017-01-06

Objective: To analyze the incidence rate of occupational noise-induced hearing loss in noise-exposed workers in an iron and steel plant from 2006 to 2015. Methods: Using a cohort study method, workers exposed to occupational noise from Jan 1, 2006 to Dec 12, 2015 were followed up and the pure tone hearing test was conducted. In total, 6 297 subjects completed two or more physical checks and the pure tone hearing test and were included in the analysis. The noise exposure level at the workplace and the equivalent continuous A-weighted sound pressure level for workers was monitored and the cumulative noise exposure dose was evaluated. The subjects were divided into low, middle and high exposure groups according to the noise exposure level, and the equivalent continuous A-weighted sound pressure level for 8 hours for each group was 80.6-85.0, 85.1-90.0 and 90.1-103.4 dB (A), respectively. While the RR and 95% CI were derived from unconditional logistic regression models. In logistic regression analysis, confounding factors such as age, gender, smoking habit, drinking habit, high temperature exposure and chemical hazards exposure level were controlled. Results: During the follow-up period, 392 cases of occupational noise-induced hearing loss were diagnosed among the 6 297 subjects, with an incidence rate of 6.23%; 318 cases of high-frequency hearing loss were diagnosed, with an incidence rate of 5.05%; and 74 cases of occupational noise-induced deafness were diagnosed, with an incidence rate of 1.18% . The incidence rates of hearing loss among the high, medium and low exposure groups were 9.22% (158/1 737), 6.49% (204/3 142) and 2.08% (30/1 442), respectively; the rates of high-frequency hearing loss were 7.41% (127/1 737), 5.25% (165/3 142) and 1.80% (26/1 442), respectively; and the rates of occupational noise-induced deafness were 1.81% (31/1 737), 1.24% (39/3 142) and 0.28% (4/1 442), respectively. For the groups corresponding to cumulative noise exposure doses of �

Algeria schedules onshore licensing round

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that Algeria's Sonatrach will conduct its first international onshore exploration licensing round in a move designed to triple drilling activity in the country. A second round will follow next April. Sonatrach plans to drill 200 wells during 1991-95, which will require the current level of 37/year to be almost trebled toward the end of the period. To this end foreign operators are being courted in an open exploration bidding round. Deadline for bid submittal in Nov. 30. Companies may enter singly or in groups to form partnerships with Sonatrach. Foreign licensees will be able to take a maximum 49% of production under Algerian law

Thermoresponsive latexes for fragrance encapsulation and release.

Science.gov (United States)

Popadyuk, N; Popadyuk, A; Kohut, A; Voronov, A

2016-04-01

To synthesize cross-linked latex particles protecting the encapsulated fragrance at ambient temperatures and facilitating the release of cargo at the temperature of the surface of the skin that varies in different regions of the body between 33.5 and 36.9°C. Poly(stearyl acrylate) (PSA), a polymer with long crystallizable alkyl side chains (undergoes order-disorder transitions at 45°C), was chosen as the main component of the polymer particles. As a result, new thermoresponsive polymer particles for fragrance encapsulation were synthesized and characterized, including assessing the performance of particles in triggered release by elevated temperature. To obtain network domains of various crystallinity, stearyl acrylate was copolymerized with dipropylene glycol acrylate caprylate (DGAC) (comonomer) in the presence of a dipropylene glycol diacrylate sebacate (cross-linker) using the miniemulsion process. Comonomers and a cross-linker were mixed directly in a fragrance during polymerization. Fragrance release was evaluated at 25, 31, 35 and 39°C to demonstrate a new material potential in personal/health care skin-related applications. Particles protect the fragrance from evaporation at 25°C. The fragrance release rate gradually increases at 31, 35 and 39°C. Two slopes were found on release plots. The first slope corresponds to a rapid fragrance release. The second slope indicates a subsequent reduction in the release rate. Crystalline-to-amorphous transition of PSA triggers the release of fragrances from cross-linked latex particles at elevated temperatures. The presence of the encapsulated fragrance, as well as the inclusion of amorphous fragments in the polymer network, reduces the particle crystallinity and enhances the release. Release profiles can be tuned by temperature and controlled by the amount of loaded fragrance and the ratio of comonomers in the feed mixture. © 2015 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

Occupational health research priorities in Malaysia: a Delphi study.

Science.gov (United States)

Sadhra, S; Beach, J R; Aw, T C; Sheikh-Ahmed, K

2001-07-01

As part of a consultancy project on occupational health, the Delphi method was used to identify research priorities in occupational health in Malaysia. Participation was sought from government ministries, industry, and professional organisations, and university departments with an interest in occupational and public health. Two rounds of questionnaires resulted in a final list of priorities, with noticeable differences between participants depending on whether they worked in industry or were from government organisations. The participation rate of 71% (55 of 78) was obtained for the first questionnaire and 76% (72 of 95) for the second questionnaire. The participants identified occupational health problems for specific groups and industries as the top research priority area (ranked as top priority by 25% of participants). Ministry of Health participants placed emphasis on healthcare workers (52% ranking it as top priority), whereas those from industry identified construction and plantation workers as groups, which should be accorded the highest priority. Evaluation of research and services was given a low priority. The priorities for occupational health determined with the Delphi approach showed differences between Malaysia, a developing country, and findings from similar European studies. This may be expected, as differences exist in stages of economic development, types of industries, occupational activities, and cultural attitudes to occupational health and safety. Chemical poisonings and workplace accidents were accorded a high priority. By contrast with findings from western countries, workplace psychosocial problems and musculoskeletal injuries were deemed less important. There also seemed to be greater emphasis on adopting interventions for identified problems based on experience in other countries rather than the need to evaluate local occupational health provisions.

Ethics rounds: An appreciated form of ethics support.

Science.gov (United States)

Silén, Marit; Ramklint, Mia; Hansson, Mats G; Haglund, Kristina

2016-03-01

Ethics rounds are one way to support healthcare personnel in handling ethically difficult situations. A previous study in the present project showed that ethics rounds did not result in significant changes in perceptions of how ethical issues were handled, that is, in the ethical climate. However, there was anecdotal evidence that the ethics rounds were viewed as a positive experience and that they stimulated ethical reflection. The aim of this study was to gain a deeper understanding of how the ethics rounds were experienced and why the intervention in the form of ethics rounds did not succeed in improving the ethical climate for the staff. An exploratory and descriptive design with a qualitative approach was adopted, using individual interviews. A total of 11 healthcare personnel, working in two different psychiatry outpatient clinics and with experience of participating in ethics rounds, were interviewed. The study was based on informed consent and was approved by one of the Swedish Regional Ethical Review Boards. The participants were generally positive about the ethics rounds. They had experienced changes by participating in the ethics rounds in the form of being able to see things from different perspectives as well as by gaining insight into ethical issues. However, these changes had not affected daily work. A crucial question is whether or not increased reflection ability among the participants is a good enough outcome of ethics rounds and whether this result could have been measured in patient-related outcomes. Ethics rounds might foster cooperation among the staff and this, in turn, could influence patient care. By listening to others during ethics rounds, a person can learn to see things from a new angle. Participation in ethics rounds can also lead to better insight concerning ethical issues. © The Author(s) 2014.

n-BA/KOH/t-BHP behaviour in the natural rubber latex vulcanization by gamma rays

International Nuclear Information System (INIS)

Souza, A. de.

1994-01-01

Natural rubber latex was vulcanized in the absence and in the presence of sensitizer (S), with gamma ray from 60 Co source, panoramic type, at the dose rate range of 1,20-1,33 kGy/h. The components of used S were n-butyl acrylate (n-BA), the KOH as stabilizer and t-butyl hydroperoxide (t-BHP) as co-S. The purpose of this work was to study the efficiency and the behaviour of each component of S in the irradiated latex crosslinking by tensile strength (T b ), volume fraction and permanent set. In the absence of S occur straight crosslinking between macromolecular adjacent radicals. IN the presence of S, the n-BA participates in the crosslinking through acrylic bridges between macromolecules. (author)

Latex paint as a delivery vehicle for diethylphthalate and di-n-butylphthalate

DEFF Research Database (Denmark)

Schripp, Tobias; Salthammer, Tunga; Fauck, Christian

2014-01-01

gas-phase concentration at steady state(y). For both, DEP and DnBP, the y0 obtained was lower than the respective saturation vapor pressure (Ps). Furthermore, for both phthalates in latex paint, the material/air partition coefficient (C0/y0) was close in value to the octanol/air partition coefficient...

Why Might the Doha Round Fail?

OpenAIRE

Gifford, Michael N.; McCalla, Alex F.

2008-01-01

There are a number of factors working against a successful Doha Round conclusion. Several of these affect the linkages and trade-offs between the main elements of the Doha Round negotiating agenda, particularly agriculture, non-agricultural market access (NAMA), services, and rules. For most of the past six years, the negotiating difficulties in agriculture were regarded as the main constraint to concluding the Doha Round. However, in recent months, as the shape of the agricultural package be...

A self-cleaning coating based on commercial grade polyacrylic latex modified by TiO{sub 2}/Ag-exchanged-zeolite-A nanocomposite

Energy Technology Data Exchange (ETDEWEB)

Nosrati, Rahimeh, E-mail: ra.nosrati@gmail.com [Polymer Composite Research Laboratory, Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz (Iran, Islamic Republic of); Olad, Ali, E-mail: a.olad@yahoo.com [Polymer Composite Research Laboratory, Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz (Iran, Islamic Republic of); Nofouzi, Katayoon, E-mail: nofouzi@tabrizu.ac.ir [Faculty of Veterinary Medicine, University of Tabriz, Tabriz (Iran, Islamic Republic of)

2015-08-15

Graphical abstract: - Highlights: • A novel nanocomposite coating based on polyacrylic was prepared. • Nanostructured TiO{sub 2}/Ag-exchanged-zeolite-A composite material was prepared. • Prepared nanocomposite used as additive for modification of polyacrylic latex. • Modified coatings show self-cleaning and antibacterial properties. • Modified coatings show better stability in water in versus of unmodified polymer. - Abstract: The commercial grade polyacrylic latex was modified in order to prepare a self-cleaning coating. TiO{sub 2}/Ag-exchanged-zeolite-A nanocomposite was prepared and used as additive in the matrix of polyacrylic latex to achieve a hydrophilic and photocatalytic coating. FTIR and UV–visible spectroscopy, X-ray diffraction patterns and FESEM were used to characterize the composition and structure of the nanocomposites and coatings. The acrylic coatings, were prepared by using of TiO{sub 2}/Ag-exchanged-zeolite-A additive, had better UV and visible light absorption, hydrophilic, degradation of organic pollutants, stability in water and antimicrobial properties than pristine commercial grade polyacrylic latex coating. According to the results, the modified polyacrylic based coating containing 0.5 wt% of TiO{sub 2}/Ag-exchanged-zeolite-A nanocomposite additive with TiO{sub 2} to Ag-exchanged-zeolite-A ratio of 1:2 was the best coating considering most of useful properties such as small band gap and low water contact angle. The water contact angle for unmodified polyacrylic latex coating was 68° which was decreased to less than 10° in modified coating after 24 h LED lamp illumination.

16 CFR 460.11 - Rounding off R-values.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Rounding off R-values. 460.11 Section 460.11... INSULATION § 460.11 Rounding off R-values. R-values shown in labels, fact sheets, ads, or other promotional materials must be rounded to the nearest tenth. However, R-values of 10 or more may be rounded to the...

Perspective on occupational mortality risks

International Nuclear Information System (INIS)

Cohen, B.L.

1981-01-01

Occupational risks to radiation workers are compared with other occupational risks on the basis of lost life expectancy (LLE) in a full working lifetime. Usual comparisons with National Safety Council accident death statistics for various industry categories are shown to be unfair because the latter average over a variety of particular industries and occupations within each industry. Correcting for these problems makes some common occupations in some industries 20-50 times more dangerous due to accidents alone than being a radiation worker. If more exposed subgroups of radiation workers are compared with more dangerous subgroups of other occupations, these ratios are maintained. Since radiation causes disease rather than acute injury, a wide range effort is made to estimate average loss of life expectancy from occupational disease; the final estimate for this is 500 days. The average American worker loses more than an order of magnitude more life expectancy from occupational disease than the average radiation worker loses from radiation induced cancer. (author)

Latex particle template lift-up guided gold wire-networks via evaporation lithography

KAUST Repository

Lone, Saifullah; Vakarelski, Ivan Uriev; Chew, Basil; Wang, Zhihong; Thoroddsen, Sigurdur T

2014-01-01

We describe a hybrid methodology that combines a two dimensional (2D) monolayer of latex particles (with a pitch size down to 1 μm) prepared by horizontal dry deposition, lift-up of a 2D template onto flat surfaces and evaporation lithography to fabricate metal micro- and nano wire-networks. This journal is

Preservation of H₂ production activity in nanoporous latex coatings of Rhodopseudomonas palustris CGA009 during dry storage at ambient temperatures: Preservation of R. palustris latex coatings

Energy Technology Data Exchange (ETDEWEB)

Piskorska, M. [Univ. of South Carolina, Aiken, SC (United States); Soule, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Gosse, J. L. [North Carolina State Univ., Raleigh, NC (United States); Milliken, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Flickinger, M. C. [North Carolina State Univ., Raleigh, NC (United States); Smith, G. W. [Univ. of South Carolina, Aiken, SC (United States); Yeager, C. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2013-01-21

To assess the applicability of latex cell coatings as an ‘off-the-shelf’ biocatalyst, the effect of osmoprotectants, temperature, humidity and O₂ on preservation of H₂ production in Rhodopseudomonas palustris coatings was evaluated. Immediately following latex coating coalescence (24 h) and for up to 2 weeks of dry storage, rehydrated coatings containing different osmoprotectants displayed similar rates of H2 production. Beyond 2 weeks of storage, sorbitol-treated coatings lost all H₂ production activity, whereas considerable H₂ production was still detected in sucrose- and trehalose-stabilized coatings. The relative humidity level at which the coatings were stored had a significant impact on the recovery and subsequent rates of H₂ production. After 4 weeks storage under air at 60% humidity, coatings produced only trace amounts of H₂ (0–0.1% headspace accumulation), whereas those stored at < 5% humidity retained 27–53% of their H₂ production activity after 8 weeks of storage. In conWhen stored in argon at < 5% humidity and room temperature, R. palustris coatings retained full H₂ production activity for 3 months, implicating oxidative damage as a key factor limiting coating storage. Overall, the results demonstrate that biocatalytic latex coatings are an attractive cell immobilization platform for preservation of bioactivity in the dry state.

Crystallization of Hevamine, an Enzyme with Lysozyme/Chitinase Activity from Hevea brasiliensis Latex

NARCIS (Netherlands)

ROZEBOOM, HJ; BUDIANI, A; BEINTEMA, JJ

1990-01-01

Hevamine, an enzyme with both lysozyme and chitinase activity, was isolated and purified from Hevea brasiliensis (rubber tree) latex. The enzyme (molecular weight 29,000) is homologous to certain “pathogenesis-related” proteins from plants, but not to hen egg-white or phage T4 lysozyme. To

Enhancing Student Writing and Computer Programming with LATEX and MATLAB in Multivariable Calculus

Science.gov (United States)

Sullivan, Eric; Melvin, Timothy

2016-01-01

Written communication and computer programming are foundational components of an undergraduate degree in the mathematical sciences. All lower-division mathematics courses at our institution are paired with computer-based writing, coding, and problem-solving activities. In multivariable calculus we utilize MATLAB and LATEX to have students explore…

Anesthesiology leadership rounding: identifying opportunities for improvement.

Science.gov (United States)

Gravenstein, Dietrich; Ford, Susan; Enneking, F Kayser

2012-01-01

Rounding that includes participation of individuals with authority to implement changes has been advocated as important to the transformation of an institution into a high-quality and safe organization. We describe a Department of Anesthesiology's experience with leadership rounding. The Department Chair or other senior faculty designate, a quality coordinator, up to four residents, the ward charge nurse, and patient nurses participated in rounds at bedsides. During a 23-month period, 14 significant opportunities to improve care were identified. Nurses identified 5 of these opportunities, primary team physicians 2, the rounding team 4, and patients or their family members another 3. The anesthesiology service had sole or shared responsibility for 10 improvements. A variety of organizations track specific measures across all phases of the patient experience to gauge quality of care. Chart auditing tools for detecting threats to safety are often used. These measures and tools missed opportunities for improvement that were discovered only through rounding. We conclude that the introduction of leadership rounding by an anesthesiology service can identify opportunities for improving quality that are not captured by conventional efforts.

Size limits for rounding of volcanic ash particles heated by lightning

Science.gov (United States)

Wadsworth, Fabian B.; Vasseur, Jérémie; Llewellin, Edward W.; Genareau, Kimberly; Cimarelli, Corrado; Dingwell, Donald B.

2017-03-01

Volcanic ash particles can be remelted by the high temperatures induced in volcanic lightning discharges. The molten particles can round under surface tension then quench to produce glass spheres. Melting and rounding timescales for volcanic materials are strongly dependent on heating duration and peak temperature and are shorter for small particles than for large particles. Therefore, the size distribution of glass spheres recovered from ash deposits potentially record the short duration, high-temperature conditions of volcanic lightning discharges, which are hard to measure directly. We use a 1-D numerical solution to the heat equation to determine the timescales of heating and cooling of volcanic particles during and after rapid heating and compare these with the capillary timescale for rounding an angular particle. We define dimensionless parameters—capillary, Fourier, Stark, Biot, and Peclet numbers—to characterize the competition between heat transfer within the particle, heat transfer at the particle rim, and capillary motion, for particles of different sizes. We apply this framework to the lightning case and constrain a maximum size for ash particles susceptible to surface tension-driven rounding, as a function of lightning temperature and duration, and ash properties. The size limit agrees well with maximum sizes of glass spheres found in volcanic ash that has been subjected to lightning or experimental discharges, demonstrating that the approach that we develop can be used to obtain a first-order estimate of lightning conditions in volcanic plumes.

Influence of wearing latex gloves on electric pulp tester readings in children.

Science.gov (United States)

Holan, G

1993-12-01

Electric pulp testers operated by completing an electric circuit. Latex examination gloves have been claimed to interrupt this circuit and lead to false-negative results. This study was conducted to evaluate the influence of wearing latex gloves on electric pulp tester (EPT) readings. The pulps of 80 maxillary permanent incisors of 22 children 10-13 1/2 years old were tested using the Pelton & Crane 'Vitapulp' instrument. Each tooth was tested twice: with gloves and with bare hands. Teeth failing to respond to the EPT without gloves were excluded from the study. All EPT readings ranged between 1 and 9.5. Five teeth gave the same responses with gloved and ungloved hands. Only five teeth did not respond when gloves were worn, and all of these gave readings near the top of the EPT scale when tested without gloves. The other 70 teeth presented significantly higher readings with gloves than without gloves. It is concluded that removal of examination gloves during the operation of the EPT is necessary only if no response is obtained.

1999 report on occupational radiation exposures in Canada

International Nuclear Information System (INIS)

Sont, W.; Ashmore, J.P.

1999-01-01

The report provides statistics on occupational radiation exposures for use by regulatory authorities, organizations and private individuals. Out of a total of 125,883 monitored workers, 4 annual doses exceeded the regulatory limit of 50 mSv in 1998. Out of 43 specified job categories, 18 had a smaller annual average in 1998 than in 1997, 17 had a higher average, and 8 had the same average rounded to 0.01 mSv. The uranium mining job categories are not in this list because the conversion factor for radon progeny exposure to effective dose was changed from 10 to 5 mSv/WLM, precluding a valid comparison of the averages. In all categories of workers, from 1996 to 1997, 19 average annual doses went up, 33 went down, and 4 stayed the same. The figures reflect a sustained effort in keeping the occupational doses low. (author)

Sequence and expression analyses of ethylene response factors highly expressed in latex cells from Hevea brasiliensis.

Directory of Open Access Journals (Sweden)

Piyanuch Piyatrakul

Full Text Available The AP2/ERF superfamily encodes transcription factors that play a key role in plant development and responses to abiotic and biotic stress. In Hevea brasiliensis, ERF genes have been identified by RNA sequencing. This study set out to validate the number of HbERF genes, and identify ERF genes involved in the regulation of latex cell metabolism. A comprehensive Hevea transcriptome was improved using additional RNA reads from reproductive tissues. Newly assembled contigs were annotated in the Gene Ontology database and were assigned to 3 main categories. The AP2/ERF superfamily is the third most represented compared with other transcription factor families. A comparison with genomic scaffolds led to an estimation of 114 AP2/ERF genes and 1 soloist in Hevea brasiliensis. Based on a phylogenetic analysis, functions were predicted for 26 HbERF genes. A relative transcript abundance analysis was performed by real-time RT-PCR in various tissues. Transcripts of ERFs from group I and VIII were very abundant in all tissues while those of group VII were highly accumulated in latex cells. Seven of the thirty-five ERF expression marker genes were highly expressed in latex. Subcellular localization and transactivation analyses suggested that HbERF-VII candidate genes encoded functional transcription factors.

Cytotoxicity Comparison of the Nanoparticles Deposited on Latex Rubber Bands between the Original and Stretched State

Directory of Open Access Journals (Sweden)

Jung-Hwan Lee

2014-01-01

Full Text Available Understanding the biocompatibility of nanoparticles in dental materials is essential for their safe usage in the oral cavity. In this study, we investigated whether nanoparticles deposited on orthodontic latex rubber bands are involved in the induction of cytotoxicity. A method of stretching to three times (“3L” the length of the latex rubber bands was employed to detach the particles using the original length (“L” for comparison. The cytotoxicity tests were performed on extracts with mouse fibroblasts (L929 and human gingival fibroblasts (HGFs. Fourier transform infrared spectroscopy, ion chromatography, elemental analysis, and inductively coupled plasma mass spectrometry (ICP-MS were performed to detect the harmful components in the extracts from rubber bands. There was a significant decrease in the cell viability in the “L” samples compared with the “3L” samples (P<0.05 in the L929 and HGF cells. This was due to the Ni single crystal nanoparticles (~50nm from the inner surface of “L” samples that were detached in the “3L” samples as well as the Zn ion (~9 ppm detected in the extract. This study revealed that the Ni nanoparticles, as well as Zn ions, were involved in the induction of cytotoxicity from the latex rubber bands.

Trial production of low protein irradiated natural rubber latex by low energy electron beam in pilot scale

International Nuclear Information System (INIS)

Utama, Marga; Yoshii, F.; Kume, T.

2006-01-01

Three importance factors for producing low protein by low energy electron beam (250 keV/10 mA) irradiation in pilot scale (20 liters per bath) with 1,9-nonediol diacrylate (NDA) namely: maturation time of natural rubber latex before irradiation, treatment of irradiated natural rubber latex (INRL) before and after centrifugation, and standard irradiation method has been carried out. The results showed that the optimum irradiation time for producing INRL with 5 phr (part hundred ratio of rubber) of NDA as sensitize agent, and with the rotation speed of agitation 210 rpm (rotation per minutes) was between 20-30 minutes. By using this condition tensile strength of the INRL film was 26 MPa. The maturation of natural rubber latex before irradiation is the key for driving the quality of INRL. Water extractable protein content of INRL after leaching in 1% ammonia solution for 30 minutes at room temperature was around 47 μ/g, and after adding with 1 phr of PVA (poly vinyl alcohol) or 0.1 phr CMC (carboxy methyl cellulose) the water extractable protein content decrease less than 6 μ/g. (author)

Antifungal Activity of Leaf and Latex Extracts of Calotropis procera (Ait.) against Dominant Seed-Borne Storage Fungi of Some Oil Seeds

OpenAIRE

Manoorkar V B; Mandge S V; B D Gachande

2015-01-01

In present study, aqueous and ethanol extracts of leaf & latex of Calotropis procera (Ait.) was tested for their antifungal activity against dominant storage seed-borne fungi of some oil seeds such as groundnut, soybean, sunflower and mustard. The antifungal effect of ethanol and aqueous extracts of leaf & latex of Calotropis procera (Ait.) against ten seed-borne dominant fungi viz., Cuvularia lunata, Alternaria alternata, Rhizoctonia solani, Fusarium solani, Penicillium chrysogenum, Asperg...

Ball mounting fixture for a roundness gage

Science.gov (United States)

Gauler, Allen L.; Pasieka, Donald F.

1983-01-01

A ball mounting fixture for a roundness gage is disclosed. The fixture includes a pair of chuck assemblies oriented substantially transversely with respect to one another and mounted on a common base. Each chuck assembly preferably includes a rotary stage and a wobble plate affixed thereto. A ball chuck affixed to each wobble plate is operable to selectively support a ball to be measured for roundness, with the wobble plate permitting the ball chuck to be tilted to center the ball on the axis of rotation of the rotary stage. In a preferred embodiment, each chuck assembly includes a vacuum chuck operable to selectively support the ball to be measured for roundness. The mounting fixture enables a series of roundness measurements to be taken with a conventional rotating gagehead roundness instrument, which measurements can be utilized to determine the sphericity of the ball.

Marketing techniques and cost calculations of radiation vulcanised natural rubber latex (RVNRL)

International Nuclear Information System (INIS)

Wan Manshol Wan Zin; Chai Chee Keong; Najib Mohammed Zakey; Hafizuddin Maseri

2005-01-01

This paper describes how RVNRL is promoted to the latex based industries locally and abroad. RVNRL promotion requires patience and very challenging. This is a fact since the product is new to the market. Cost is important in deciding its market and potential usage. The elements that contribute to the cost is described in this paper. (Author)

Planetary Taxonomy: Label Round Bodies "Worlds"

Science.gov (United States)

Margot, Jean-Luc; Levison, H. F.

2009-05-01

The classification of planetary bodies is as important to Astronomy as taxonomy is to other sciences. The etymological, historical, and IAU definitions of planet rely on a dynamical criterion, but some authors prefer a geophysical criterion based on "roundness". Although the former criterion is superior when it comes to classifying newly discovered objects, the conflict need not exist if we agree to identify the subset of "round" planetary objects as "worlds". This addition to the taxonomy would conveniently recognize that "round" objects such as Earth, Europa, Titan, Triton, and Pluto share some common planetary-type processes regardless of their distance from the host star. Some of these worlds are planets, others are not. Defining how round is round and handling the inevitable transition objects are non-trivial tasks. Because images at sufficient resolution are not available for the overwhelming majority of newly discovered objects, the degree of roundness is not a directly observable property and is inherently problematic as a basis for classification. We can tolerate some uncertainty in establishing the "world" status of a newly discovered object, and still establish its planet or satellite status with existing dynamical criteria. Because orbital parameters are directly observable, and because mass can often be measured either from orbital perturbations or from the presence of companions, the dynamics provide a robust and practical planet classification scheme. It may also be possible to determine which bodies are dynamically dominant from observations of the population magnitude/size distribution.

A test trial irradiation of natural rubber latex on large scale for the production of examination gloves in a production scale

International Nuclear Information System (INIS)

Devendra, R.; Kulatunge, S.; Chandralal, H.N.K.K.; Kalyani, N.M.V.; Seneviratne, J.; Wellage, S.

1996-01-01

Radiation Vulcanization of natural rubber latex has been developed extensively through various research and development programme. During these investigations many data was collected and from these data it was proved that radiation vulcanized natural rubber latex (RVNRL) can be used as a new material for industry (RVNRL symposium 1989; Makuuchi IAEA report). This material has been extensively tested in making of dipped goods and extruded products. However these investigations were confined only to laboratory experiments and these experiments mainly reflected material properties of RVNRL and only a little was observed about its behavior in actual production scale operation. The present exercise was carried out mainly to study the behavior of the material in production scale by irradiating latex on a large scale and producing gloves in a production scale plant. It was found that RVNRL can be used in conventional glove plants without making major alteration to the plant. Quality of the gloves that were produced using RVNRL is acceptable. It was also found that the small deviation of vulcanization dose will affect the crosslinking density of films. This will drastically reduce the tensile strength of the film. Crosslinking density or pre-vulcanized relax modulus (PRM) at 100% is a reliable property to control the pre vulcanization of latex by radiation

Boarding ICU patients: Are our rounding practices subpar?

Science.gov (United States)

Nunn, Andrew M; Hatchimonji, Justin S; Holena, Daniel N; Seamon, Mark J; Smith, Brian P; Kaplan, Lewis J; Martin, Niels D; Reilly, Patrick M; Schwab, C William; Pascual, Jose L

2018-04-01

Surgical Intensive Care Unit (SICU) patients "boarding" in ICUs other than the designated home unit have been shown to suffer increased rates of complications. We hypothesized that ICU rounding practices are different when SICU patients are housed in home vs. boarding ICUs. SICU rounds were observed at an academic quaternary medical center. Individual patient rounding time and order seen on rounds along with patient data and demographics were recorded. Multivariable regression analysis was used for comparison between patients. Non-boarders were older, observed on a later post ICU admission day and were more likely to be mechanically ventilated. Boarded patients were often seen at the end of rounds and for less time. Not being a boarder, age, APACHE II score on admission, vasopressor use, and positive pressure ventilation all predicted increased rounding time. Surgical ICU patients boarding in non-preferred units are often seen at the end of rounds, result in a greater reliance upon telephone communication, and receive less bedside attention from ICU provider teams. Copyright © 2017 Elsevier Inc. All rights reserved.

COMPARATIVE HAEMOSTATIC EFFICACY OF SUCCULENT LEAF EXTRACTS AND LATEX OF SOME WOUND HEALING PLANTS ON FRESH WOUND OF RABBIT

Directory of Open Access Journals (Sweden)

Shibabrata Pattanayak

2015-06-01

Full Text Available Ethnomedicinal report of haemostatic activity of six medicinal plants was validated by a study of the effect of succulent leaf extract of plant parts on the punch wound of rabbit for the first time. It was found that the succulent leave extracts of Artemisia nilagirica (Clarke, Barleria lupulina Lindl., Blumea lacera Dc., Croton bonplandianum Baill, Glinus lotoides Lin. and Mikania scandens (L Willd. can induce haemostasis in fresh wounds as compared to automatic haemostasis (120.00 ±2.91 seconds. The fresh leave extract of Mikania scandens took 25.00 ±1.87 seconds for haemostatic activity. Artemisia nilagirica (35.00 ± 1.50 seconds, Barleria lupulina (30.00 ±2.34 seconds, Blumea lacera (38.00 ±1.87 seconds, Glinus lotoides (35.00 ±2.29 seconds are having better action than Croton bonplandianum (leaf extract, which took 40.00 ±2.69 seconds time for haemostasis. The latex collected from the wounded small branches of living Croton bonplandianum plant is having highest efficacy in causing haemostasis (10.00 ±1.22 seconds, better than the positive control of Tincture Ferric per Chloride (13.00 ±2.54 seconds. The dermal toxicity study reveals that the application of the fresh plant extract on the skin of rat failed to produce any detrimental effect. The plant extracts collected from succulent plant leaves and particularly the latex collected from the living Croton bonplandianum Baill. plant can be used as haemostatic agents.

Synthesis, Characterization and Gold Loading of Polystyrene-Poly(pyridyl methacrylate) Core-Shell Latex Systems

NARCIS (Netherlands)

Oláh, A.; Hempenius, Mark A.; Vancso, Gyula J.

2004-01-01

In this research, novel 3-(2-pyridyl)propyl methacrylate and 3-(3-pyridyloxy)propyl methacrylate monomers were synthesized and emulsion polymerized on colloidal polystyrene seeds, resulting in core–shell latex systems. The cores and the core–shell particles were characterized by static light

40 CFR 73.12 - Rounding Procedures.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Rounding Procedures. 73.12 Section 73.12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) SULFUR DIOXIDE ALLOWANCE SYSTEM Allowance Allocations § 73.12 Rounding Procedures. (a) Calculation...

Occupational noise-induced tinnitus: does it affect workers' quality of life?

Science.gov (United States)

Muluk, Nuray Bayar; Oguztürk, Omer

2008-02-01

This prospective study aimed to investigate the quality of life of workers in a steel factory. The study group was composed of 16 male workers with tinnitus and 30 ears. Fifteen male workers without tinnitus and 30 ears were included into the control group. Workers were evaluated by questionnaire, pure-tone audiometry, and the SF-36 Health Survey. In the study group, tinnitus loudness levels (TLLs) were found. In the study group, the domains general mental health and role limitations owing to emotional problems were significantly lower than in the control group. Older age, industrial noise exposure over a long period, higher noise exposure during work, and hearing loss secondary to occupational noise caused workers to experience higher TLLs. Earheadings protected workers more than earplugs, and TLLs were lower. Important factors that affect workers' quality of life are maximum exposed noise levels, daily and total noise exposure time, and exposure to continuous noise. Occupational noise-induced tinnitus mainly causes emotional disability rather than physical disability. Emotionally impaired QOL results may be due to tinnitus-related psychological problems. Workers should have knowledge about the hazardous effects of noise. Periodic health checkups and regular seminars have great importance. Workers must be aware of other ototoxic factors, such as medications and noisy music. In the future, researchers should develop a screening method to detect those with a more hereditary affinity to hearing loss.

Psychosocial work characteristics of personal care and service occupations: a process for developing meaningful measures for a multiethnic workforce.

Science.gov (United States)

Hoppe, Annekatrin; Heaney, Catherine A; Fujishiro, Kaori; Gong, Fang; Baron, Sherry

2015-01-01

Despite their rapid increase in number, workers in personal care and service occupations are underrepresented in research on psychosocial work characteristics and occupational health. Some of the research challenges stem from the high proportion of immigrants in these occupations. Language barriers, low literacy, and cultural differences as well as their nontraditional work setting (i.e., providing service for one person in his/her home) make generic questionnaire measures inadequate for capturing salient aspects of personal care and service work. This study presents strategies for (1) identifying psychosocial work characteristics of home care workers that may affect their occupational safety and health and (2) creating survey measures that overcome barriers posed by language, low literacy, and cultural differences. We pursued these aims in four phases: (Phase 1) Six focus groups to identify the psychosocial work characteristics affecting the home care workers' occupational safety and health; (Phase 2) Selection of questionnaire items (i.e., questions or statements to assess the target construct) and first round of cognitive interviews (n = 30) to refine the items in an iterative process; (Phase 3) Item revision and second round of cognitive interviews (n = 11); (Phase 4) Quantitative pilot test to ensure the scales' reliability and validity across three language groups (English, Spanish, and Chinese; total n = 404). Analysis of the data from each phase informed the nature of subsequent phases. This iterative process ensured that survey measures not only met the reliability and validity criteria across groups, but were also meaningful to home care workers. This complex process is necessary when conducting research with nontraditional and multilingual worker populations.

Improving nurse-physician teamwork through interprofessional bedside rounding.

Science.gov (United States)

Henkin, Stanislav; Chon, Tony Y; Christopherson, Marie L; Halvorsen, Andrew J; Worden, Lindsey M; Ratelle, John T

2016-01-01

Teamwork between physicians and nurses has a positive association with patient satisfaction and outcomes, but perceptions of physician-nurse teamwork are often suboptimal. To improve nurse-physician teamwork in a general medicine inpatient teaching unit by increasing face-to-face communication through interprofessional bedside rounds. From July 2013 through October 2013, physicians (attendings and residents) and nurses from four general medicine teams in a single nursing unit participated in bedside rounding, which involved the inclusion of nurses in morning rounds with the medicine teams at the patients' bedside. Based on stakeholder analysis and feedback, a checklist for key patient care issues was created and utilized during bedside rounds. To assess the effect of bedside rounding on nurse-physician teamwork, a survey of selected items from the Safety Attitudes Questionnaire (SAQ) was administered to participants before and after the implementation of bedside rounds. The number of pages to the general medicine teams was also measured as a marker of physician-nurse communication. Participation rate in bedside rounds across the four medicine teams was 58%. SAQ response rates for attendings, residents, and nurses were 36/36 (100%), 73/73 (100%), and 32/73 (44%) prior to implementation of bedside rounding and 36 attendings (100%), 72 residents (100%), and 14 (19%) nurses after the implementation of bedside rounding, respectively. Prior to bedside rounding, nurses provided lower teamwork ratings (percent agree) than residents and attendings on all SAQ items; but after the intervention, the difference remained significant only on SAQ item 2 ("In this clinical area, it is not difficult to speak up if I perceive a problem with patient care", 64% for nurses vs 79% for residents vs 94% for attendings, P=0.02). Also, resident responses improved on SAQ item 1 ("Nurse input is well received in this area", 62% vs 82%, P=0.01). Increasing face-to-face communication through

Occupational noise-induced hearing loss among workers at Jomo Kenyatta International Airport, Nairobi.

Science.gov (United States)

Anino, J O; Afullo, A; Otieno, F

2010-02-01

Occupational noise induced hearing loss (NIHL) occurs among workers exposed to excessive amounts of noise for long durations. The average level of noise in some locations at Jomo Kenyatta International Airport (JKIA) was above the safe limit of 85dB hence workers were thought to be at risk. To determine the occurrence and socio demographic attributes for NIHL at JKIA. Cross sectional descriptive study. Jomo Kenyatta International Airport, Nairobi, Kenya. Mean age of respondents was 37 years with range 22 to 62, SD 8.98. Mean duration of exposure to noise was 10.7 years with range 1 to 40, SD 8.15. Prevalence of NIHL was 15.3%, with ground crew at 14.8% and air crew 16.1%. Ground crew had significantly poorer mean hearing threshold level at 3, 4 and 6 kHz than air crew (p = 0.015). Male workers were affected more than female counterparts with a male to female ratio of 4:3. 97% of those affected were non-managers, 3% managers while 68% of those affected resided in Embakasi Division close to the airport. Hearing threshold level at 4 kHz deteriorated with increasing age whereby those aged 50 years and above had a 13.7 times higher relative risk than those aged 20 to 29 years. Duration of exposure more than 10 years also had significantly higher risk (p hearing loss at 4 kHz. Occupational noise induced hearing loss occurs atJKIA and that ground crew and older workers are more vulnerable. We recommend that prevention programmes be put in place.

Rounded atelectasis of the lung: A pictorial review

International Nuclear Information System (INIS)

Sobocińska, Magdalena; Sobociński, Bartosz; Jarzemska, Agnieszka; Serafin, Zbigniew

2014-01-01

Rounded atelectasis of the lung is well described in medical literature, but still difficult to diagnose. Since lesions give no clinical symptoms in patients, radiologists are often the first to recognize the round lesion in an X-ray picture or a CT scan. Rounded atelectasis is an atypical form of lung collapse that usually occurs adjacent to scarred pleura and can be mistaken for lung cancer. Patients with rounded atelectasis have a history of asbestos exposure or pleural effusion due to various causes. When characteristic imaging findings are present, the diagnosis is rarely dubious and no further investigation is necessary. However, differential diagnosis of rounded atelectasis poses a challenge to pulmonary specialists and radiologists

Rounded atelectasis of the lung: A pictorial review.

Science.gov (United States)

Sobocińska, Magdalena; Sobociński, Bartosz; Jarzemska, Agnieszka; Serafin, Zbigniew

2014-01-01

Rounded atelectasis of the lung is well described in medical literature, but still difficult to diagnose. Since lesions give no clinical symptoms in patients, radiologists are often the first to recognize the round lesion in an X-ray picture or a CT scan. Rounded atelectasis is an atypical form of lung collapse that usually occurs adjacent to scarred pleura and can be mistaken for lung cancer. Patients with rounded atelectasis have a history of asbestos exposure or pleural effusion due to various causes. When characteristic imaging findings are present, the diagnosis is rarely dubious and no further investigation is necessary. However, differential diagnosis of rounded atelectasis poses a challenge to pulmonary specialists and radiologists.

Round Ligament Varicosities During Pregnancy: Case Report

International Nuclear Information System (INIS)

Baek, Chang Kyu; Oh, Young Taik; Jung, Dae Chul

2011-01-01

There are various causes of a painful palpable mass in the groin during pregnancy. The differential diagnoses of an inguinal mass include hernia, lymphadenopathy, mesothelial cyst, cystic lymphangioma, neoplasms (lipoma, leiomyoma and sarcoma), endometriosis, embryonic remnants and round ligament varicosities. Among them, round ligament varicosities can be easily misdiagnosed as an inguinal hernia in a pregnant woman. These lesions should be managed conservatively because they resolve spontaneously during the postpartum period. Ultrasonography can help make the diagnosis of round ligament varicosities and so prevent unnecessary surgical intervention and the associated morbidity. Herein we report on a case of round ligament varicosities that presented during pregnancy and this condition was readily diagnosed via Doppler sonography

Round Ligament Varicosities During Pregnancy: Case Report

Energy Technology Data Exchange (ETDEWEB)

Baek, Chang Kyu; Oh, Young Taik; Jung, Dae Chul [Yonsei University Health System, Seoul (Korea, Republic of)

2011-12-15

There are various causes of a painful palpable mass in the groin during pregnancy. The differential diagnoses of an inguinal mass include hernia, lymphadenopathy, mesothelial cyst, cystic lymphangioma, neoplasms (lipoma, leiomyoma and sarcoma), endometriosis, embryonic remnants and round ligament varicosities. Among them, round ligament varicosities can be easily misdiagnosed as an inguinal hernia in a pregnant woman. These lesions should be managed conservatively because they resolve spontaneously during the postpartum period. Ultrasonography can help make the diagnosis of round ligament varicosities and so prevent unnecessary surgical intervention and the associated morbidity. Herein we report on a case of round ligament varicosities that presented during pregnancy and this condition was readily diagnosed via Doppler sonography

Determination of the content of alkyl ketene dimer in its latex by an ionic-liquid assisted headspace gas chromatography.

Science.gov (United States)

Yan, Ning; Wan, Xiao-Fang; Chai, Xin-Sheng; Chen, Run-Quan; Chen, Chun-Xia

2017-12-29

This paper reports on an ionic-liquid assisted headspace gas chromatographic (HS-GC) for the determination of the content of alkyl ketene dimer (AKD) in its latex samples, in which the GC system was equipped with a thermal conductivity detector (TCD). The method was based on the AKD hydrolysis conducted in 1-butyl-3-methylimidazolium chloride (ionic-liquid) added medium at 100°C for 10min in a closed headspace sample vial, and the measured CO 2 (the resulting product of the hydrolysis) by HS-GC. The results showed that the present method has a good measurement precision (RSD <2.3%) and accuracy (recoveries from 96 - 105%), and the limit of quantitation (LOQ) is 0.9%. The present method is very suitable to be used for the routine check of AKD content in its latex sample in mill applications. The study also showed that the content of AKD in the tested commercial latex samples were in the range of 3.5-12%. Copyright © 2017 Elsevier B.V. All rights reserved.

Reviving post-take surgical ward round teaching.

Science.gov (United States)

Force, Jade; Thomas, Ian; Buckley, Frances

2014-04-01

Learning in the clinical environment is an important feature of medical education. Ward-round teaching leads to relevant, applied and lasting learning of knowledge, skills and attitudes; however, on fast-paced ward rounds in specialties such as general surgery, the student experience is often suboptimal, and teaching can be overlooked. Clinical teaching fellows (CTFs) are postgraduate doctors ranging from foundation year-2 (FY2) level through to specialty trainees, who have elected to spend up to 2 years out of the programme to teach medical undergraduates. This article explores whether CTFs can successfully support the regular delivery of undergraduate medical teaching on the busy post-take surgical ward round (PTSWR). The CTFs at Raigmore Hospital, Inverness, planned and facilitated weekly, structured teaching sessions to accompany the PTSWR. This educational intervention was evaluated using pre- and post-intervention student questionnaires. The questionnaires focused on student enjoyment and depth of learning using Likert scales and free-text components. Students were also asked about barriers to learning on typical PTSWRs. The consultant surgeons leading on these rounds were issued separate questionnaires, to gauge their evaluation of CTF support. The main barrier to effective undergraduate ward round teaching was a lack of time on the part of clinical staff. Ward rounds accompanied by CTF support significantly increased student enjoyment (p student satisfaction, and was welcomed by clinical staff. CTF support could be widened to other busy ward rounds, e.g. acute medical takes, to enhance student learning and reduce the teaching burden on clinical faculty staff. © 2014 John Wiley & Sons Ltd.

Evaluation of wound healing treated with latex derived from rubber trees and Aloe Vera extract in rats.

Science.gov (United States)

Brandão, Marcelo Luiz; Reis, Paulo Roberto Melo; Araújo, Lilhian Alves de; Araújo, Ana Carolina Vicente; Santos, Maisa Helena de Abreu Silva; Miguel, Marina Pacheco

2016-09-01

To compare the use of latex derivative and Aloe vera extract to wound healing. Twenty one rats were randomly divided into three groups and each one had a wound made by incision. The treatment consisted in: derivative of latex (GL), Aloe vera extract (GA) and saline solution (GC). The wound area was measured on the 7th, 14th and 21st days and macroscopic and microscopic evaluation were done. The comparison between the measurements of the wounds presented statistical difference in GC and GA from the 7th day of evaluation and GL from the 14th day. The extent of the wound was significantly smaller by the 7th day in GL. Histologically, in GL, the neovascularization was significant on the 7th, 14th and 21st days. On the 21st day the scar was large and little mature. In GA and GC, the findings were similar on the 7th, 14th and 21st days with a slight better organization of skin and collagen on the 21st in GA. Statistical analysis did not allow for the definition of the best topical agent. The latex had the highest angiogenesis, but a possible foreign body granuloma. Aloe vera has revealed a healing process adequated temporally in histology.

Lipid transfer protein from Hevea brasiliensis (Hev b 12), a cross-reactive latex protein

NARCIS (Netherlands)

Beezhold, Donald H.; Hickey, Vicky L.; Kostyal, David A.; Puhl, Henry; Zuidmeer, Laurian; van Ree, Ronald; Sussman, Gordon L.

2003-01-01

BACKGROUND: Latex-allergic individuals experience clinical cross-reactivity to a large number of fruits and vegetables. Much of the cross-reactivity can be attributed to Hev b 6, but evidence indicates that additional cross-reactive allergens may be present. A common pan-allergen, which has not

Physical-biopolymer characterization of polyhydroxybutyrate-co-hydroxyvalerate (PHBV) blended with natural rubber latex

Energy Technology Data Exchange (ETDEWEB)

Kuntanoo, K., E-mail: thip-kk@hotmail.com [Graduate School of Khon Kaen University, Khon Kaen, 40002 Thailand (Thailand); Promkotra, S., E-mail: sarunya@kku.ac.th [Department of Geotechnology, Faculty of Technology, Khon Kaen University, Khon Kaen 40002 Thailand (Thailand); Kaewkannetra, P., E-mail: paknar@kku.ac.th [Department of Biotechnology, Faculty of Technology, Khon Kaen University, Khon Kaen 40002 Thailand (Thailand)

2015-03-30

A biopolymer of polyhydroxybutyrate-co-hydroxyvalerate (PHBV) is blended with bio-based materials, natural rubber latex, to improve their microstructures. The various ratios between PHBV and natural rubber latex are examined to develop their mechanical properties. In general, physical properties of PHBV are hard, brittle and low flexible while natural rubber (NR) is presented itself as high elastic materials. Concentrations of the PHBV solution are constituted at 1%, 2% and 3% (w/v). The mixtures of their PHBV solutions to natural rubber latex are produced the blended films in three different ratios of 4:6, 5:5 and 6:4, respectively. They are characterized by appearance analyses which are the scanning electron microscope (SEM), universal testing machine (UTM) and differential scanning calorimetry (DSC). The SEM photomicrographs of the blended films and the controlled PHBV can provide the void distribution in the range of 12-14% and 19-21%, respectively. For mechanical properties of the blended films, the various elastic moduli of 1%, 2% and 3% (w/v) PHBV are the average of 773, 956 and 1,007 kPa, respectively. The tensile strengths of the blends increase with the increased concentrations of PHBV, similarly trend to the elastic modulus. The crystallization and melting behavior of unmixed PHBV and the blends are determined by DSC. Melting transition temperatures (T{sub m}) of the unmixed PHBV are stated two melting peak at 154°C and 173°C. Besides, the melting peaks of the blends alter in the range of 152-156°C and 168-171°C, respectively. According to morphology of the blends, the void distribution decreases twice compared to the unmixed PHBV. The results of mechanical properties and thermal analysis indicate that the blended PHBV can be developed their properties by more resilient and wide range of temperature than usual.

Obtaining of a rapid diagnostic test for Cholera, based on latex particles coupled with a monoclonal antibody against Vibrio cholera O1 lipopolysaccharide

Directory of Open Access Journals (Sweden)

Fátima Reyes-López

2015-08-01

Full Text Available Cholera is an acute contagious intestinal disease caused by ingestion of food or water contaminated with O1 and O139 serotypes of the bacterium Vibrio cholerae. Cholera is characterized by abundant secretory diarrhea leading to dehydration. Death occurs within hours without treatment, so early diagnosis is very important, especially at the beginning of the disease, because it is difficult to differentiate from other acute diarrheal diseases. The diagnostic golden test is the stool culture; however, it does not guarantee a rapid detection of the disease. Rapid tests have been recently developed; they are based on test strips and agglutination with latex particles, which are very effective, but difficult to acquire for their high prices. The objective of this research was to obtain a quick assay based on latex particles coupled with a monoclonal antibody (mAb against V. cholerae O1 lipopolysaccharide obtained in Finlay Institute. Latex particles of 0.8 µm were used in a 10% suspension, and they were coupled to the mAb (0.25 mg/ml for 2 hours at 37°C. The sensitivity, specificity and performance were evaluated in 84 stool samples from patients with presumptive diagnosis of cholera. The diagnostic test obtained showed no cross-reactivity against no-O1 strains and other enteropathogens. Latex diagnostic test showed values of sensitivity, specificity and efficacy of 97.87; 97.29 and 97.6% respectively, very similar to the commercial diagnostic test CTK- Biotech. The latex reagent obtained can be used in the rapid diagnosis of the disease.

The effect of proteins on the aging properties of radiation vulcanized natural rubber latex

International Nuclear Information System (INIS)

Abad, L.V.

1993-01-01

The effect of natural rubber latex (NRL) proteins on the aging properties of NRL films was investigated. SDS-PAGE electrophoresis of the rubber proteins in NRL (Sri-Lanka) indicated a total of 18 proteins. A sharp decrease in tensile strength was observed after aging when NRL films were leached in 1% NH 4 OH. However, when these films were soaked in ethanol prior to leaching, the aging properties approximated those of the unleashed samples. Electrophoretic analysis of the proteins present in the NH 3 extracts of leached RVNRL films showed a high concentration of the protein herein. This protein was not found in the NH 3 extracts of ethanol soaked films. NRL proteins were shown to decelerate the aging process of Radiation Vulcanized Natural Rubber Latex (RVNRL) films. Among the proteins, herein exhibited good anti-aging properties. The hydrolyzates from NR proteins also enhanced considerably the aging properties of RVNRL. (auth.). 8 refs.; 40 figs.; 30 tabs

Synergic effect of salivary pH baselines and low pH intakes on the force relaxation of orthodontic latex elastics.

Science.gov (United States)

Ajami, Shabnam; Farjood, Amin; Zare, Mahbubeh

2017-01-01

Latex elastics are still in common use due to their low cost and high flexibility to improve sagittal discrepancies or interdigitation of teeth. Mechanical properties of elastics are influenced by several environmental factors such as pH changes. This study evaluated similar latex elastics to define the influence of synergic effect of intermittent low pH and various baselines pH of saliva. Four groups of latex elastics (3-M Unitek, 3/16 inch) were tested ( n = 15 in each group). Two groups of elastics were immersed in two tanks of artificial saliva with different pH levels of 7 and 5, and two groups were immersed in two tanks of artificial saliva with intermittent drop of pH to 4. The force was measured when the elastics were stretched to 25 mm. These measurements were taken in 0, 4, 8, 12, 24, 36, and 48 h for each group. Repeated measures analysis of variance (RMANOVA) and post-hoc Tukey's test were used to assess the findings. The level of significance was 0.05%. The interaction between pH and time analyzed with RMANOVA showed no significant differences ( P > 0.05) except in 36 h ( P = 0.014). The Tukey's analysis showed that each comparison between any two groups did not indicate significant differences ( P > 0.05) except between Groups 1 and 3 and between Groups 2 and 3 ( P pH and force degradation in latex elastic band except in 36 h.

Multiple myxoid cysts secondary to occupation.

Science.gov (United States)

Connolly, M; de Berker, D A R

2006-05-01

We report the case of a 50-year-old woman who presented with eight digital myxoid cysts (DMCs) involving the fingers of both hands. They developed within 12 months of the patient starting a job that involved pushing a garment into an embroidery mould, thus exerting a downward force on the fingertips. The pressure exerted from this force could have potentially damaged the joint synovial capsule, leading to rupture and loss of synovial gel, thus inducing myxoid cysts. This case suggests that DMCs may be related to occupation, and to our knowledge, this is only the second reported case of occupationally induced DMCs.

Natural rubber latex used as drug delivery system in guided bone regeneration (GBR

Directory of Open Access Journals (Sweden)

Rondinelli Donizetti Herculano

2009-06-01

Full Text Available In this work, we propose natural rubber latex (NRL membranes as a protein delivery system. For this purpose Bovine Serum Albumin (BSA was incorporated into the latex solution for in vitro protein delivery experiments. Different polymerization temperatures were used, from -10 to 27 °C, in order to control the membrane morphology. These membranes were characterized by Scanning Electron Microscopy (SEM, Atomic Force Microscopy (AFM, as well as the Lowry Method to measure the BSA release. SEM and AFM microscopy analysis showed that the number, size and distribution of pores in NRL membranes can be varied, as well as its overall morphology. We have found that the morphology of the membrane is the predominant factor for higher protein release, compared with pore size and number of pores. Results demonstrated that the best drug-delivery system was the membrane polymerized at RT (27 °C, which does release 66% of its BSA content for up to 18 days. Our results indicate that NRLb could be used in the future as an active membrane that could accelerate bone healing in GBR.

U-value measurements on ISO round Robin window

DEFF Research Database (Denmark)

Duer, Karsten

1997-01-01

9 laboratories in 6 european and 2 north american countries have participated in a round robin U-value test of a standard facade window. The objective of the round robin test was to verify that the ISO/CEN proposals for U-value measurement standard is robust.......9 laboratories in 6 european and 2 north american countries have participated in a round robin U-value test of a standard facade window. The objective of the round robin test was to verify that the ISO/CEN proposals for U-value measurement standard is robust....

Validation for radiation sterilization of surgical latex glove

International Nuclear Information System (INIS)

Liu Degui

2002-01-01

Objective: To determine the optimal radiation mode for sterilization of surgical latex gloves. Methods: The dose distribution in the product loads inside radiation container was measured in different radiation mode. Results: Data of dose distribution in the product load in different radiation mode were obtained. Conclusion: At pre-set height of source working position and within pre-determined dwelling time of each irradiation container staying at the irradiation position, the delivered dose can meet the customers requirement by the radiation mode that, in the half cycle of radiation process, turns the horizontal middle layers of the product to the upper or lower layers, and the upper and lower layers to the middle layers

Induced responses to herbivory and jasmonate in three milkweed species.

Science.gov (United States)

Rasmann, Sergio; Johnson, M Daisy; Agrawal, Anurag A

2009-11-01

We studied constitutive and induced defensive traits (latex exudation, cardenolides, proteases, and C/N ratio) and resistance to monarch caterpillars (Danaus plexippus) in three closely related milkweed species (Asclepias angustifolia, A. barjoniifolia and A. fascicularis). All traits showed significant induction in at least one of the species. Jasmonate application only partially mimicked the effect of monarch feeding. We found some correspondence between latex and cardenolide content and reduced larval growth. Larvae fed cut leaves of A. angustifolia grew better than larvae fed intact plants. Addition of the cardenolide digitoxin to cut leaves reduced larval growth but ouabain (at the same concentration) had no effect. We, thus, confirm that latex and cardenolides are major defenses in milkweeds, effective against a specialist herbivore. Other traits such as proteases and C/N ratio additionally may be integrated in the defense scheme of those plants. Induction seems to play an important role in plants that have an intermediate level of defense, and we advocate incorporating induction as an additional axis of the plant defense syndrome hypothesis.

Cardenolides, induced responses, and interactions between above- and belowground herbivores of milkweed (Asclepias spp.).

Science.gov (United States)

Rasmann, Sergio; Agrawal, Anurag A; Cook, Susan C; Erwin, Alexis C

2009-09-01

Theory has long predicted allocation patterns for plant defense against herbivory, but only recently have both above- and belowground plant defenses been considered simultaneously. Milkweeds in the genus Asclepias are a classic chemically defended clade of plants with toxic cardenolides (cardiac glycosides) and pressurized latex employed as anti-herbivore weapons. Here we combine a comparative approach to investigate broadscale patterns in allocation to root vs. shoot defenses across species with a species-specific experimental approach to identify the consequences of defense allocational shifts on a specialist herbivore. Our results show phylogenetic conservatism for inducibility of shoot cardenolides by an aboveground herbivore, with only four closely related tropical species showing significant induction; the eight temperate species examined were not inducible. Allocation to root and shoot cardenolides was positively correlated across species, and this relationship was maintained after accounting for phylogenetic nonindependence. In contrast to long-standing theoretical predictions, we found no evidence for a trade-off between constitutive and induced cardenolides; indeed the two were positively correlated across species in both roots and shoots. Finally, specialist root and shoot herbivores of common milkweed (A. syriaca) had opposing effects on latex production, and these effects had consequences for caterpillar growth consistent with latex providing resistance. Although cardenolides were not affected by our treatments, A. syriaca allocated 40% more cardenolides to shoots over roots. We conclude that constitutive and inducible defenses are not trading off across plant species, and shoots of Asclepias are more inducible than roots. Phylogenetic conservatism cannot explain the observed patterns of cardenolide levels across species, but inducibility per se was conserved in a tropical clade. Finally, given that above- and belowground herbivores can systemically

Outcomes of a natural rubber latex control program in an Ontario teaching hospital.

Science.gov (United States)

Tarlo, S M; Easty, A; Eubanks, K; Parsons, C R; Min, F; Juvet, S; Liss, G M

2001-10-01

Allergy to natural rubber latex (NRL) has been frequently reported in health care workers. However, there is little published evidence of the outcome of hospital intervention programs to reduce exposure and detect cases of sensitization early. This study assesses the effects of intervention to reduce NRL allergy in an Ontario teaching hospital with approximately 8000 employees. A retrospective review assessed annual numbers of employees visiting the occupational health clinic, allergy clinic, or both for manifestations of NRL allergy compared with the timing of introduction of intervention strategies, such as worker education, voluntary medical surveillance, and hospital conversion to low-protein, powder-free NRL gloves. The number of workers identified with NRL allergy rose annually, from 1 in 1988 to 6 in 1993. When worker education and voluntary medical surveillance were introduced in 1994, a further 25 workers were identified. Nonsterile gloves were changed to low-protein, powder-free NRL gloves in 1995: Diagnoses fell to 8 workers that year, and 2 of the 3 nurses who had been off work because of asthma-anaphylaxis were able to return to work with personal avoidance of NRL products. With a change to lower protein, powder-free NRL sterile gloves in 1997, allergy diagnoses fell to 3, and only 1 new case was identified subsequently up to May 1999. No increased glove costs were incurred as a result of consolidated glove purchases. This program to reduce NRL allergy in employees was effectively achieved without additional glove costs while reducing expenses from time off work and workers' compensation claims.

Evidence for predatory control of the invasive round goby

Science.gov (United States)

Madenjian, C.P.; Stapanian, M.A.; Witzel, L.D.; Einhouse, D.W.; Pothoven, S.A.; Whitford, H.L.

2011-01-01

We coupled bioenergetics modeling with bottom trawl survey results to evaluate the capacity of piscivorous fish in eastern Lake Erie to exert predatory control of the invading population of round goby Neogobius melanostomus. In the offshore (>20 m deep) waters of eastern Lake Erie, burbot Lota lota is a native top predator, feeding on a suite of prey fishes. The round goby invaded eastern Lake Erie during the late 1990s, and round goby population size increased dramatically during 1999–2004. According to annual bottom trawl survey results, round goby abundance in offshore waters peaked in 2004, but then declined during 2004–2008. Coincidentally, round goby became an important component of burbot diet beginning in 2003. Using bottom trawling and gill netting, we estimated adult burbot abundance and age structure in eastern Lake Erie during 2007. Diet composition and energy density of eastern Lake Erie burbot were also determined during 2007. This information, along with estimates of burbot growth, burbot mortality, burbot water temperature regime, and energy densities of prey fish from the literature, were incorporated into a bioenergetics model application to estimate annual consumption of round goby by the adult burbot population. Results indicated that the adult burbot population in eastern Lake Erie annually consumed 1,361 metric tons of round goby. Based on the results of bottom trawling, we estimated the biomass of yearling and older round goby in offshore waters eastern Lake Erie during 2007–2008 to be 2,232 metric tons. Thus, the adult burbot population was feeding on round goby at an annual rate equal to 61% of the estimated round goby standing stock. We concluded that the burbot population had high potential to exert predatory control on round goby in offshore waters of eastern Lake Erie.

THE PRIMARY STRUCTURE OF HEVAMINE, AN ENZYME WITH LYSOZYME CHITINASE ACTIVITY FROM HEVEA-BRASILIENSIS LATEX

NARCIS (Netherlands)

JEKEL, PA; HARTMANN, JBH; BEINTEMA, JJ

1991-01-01

The primary structure of hevamine, an enzyme with lysozyme/chitinase activity from Hevea brasiliensis latex, has been determined predominantly with conventional non-automatic methods. The positions of three disulfide bridges have been determined. The sequence has about 60% identity with that of a

The role of proteins on the thermal oxidative aging of radiation vulcanized natural rubber latex

International Nuclear Information System (INIS)

Abad, L.V.; Rosa, A. de la; Keizo Makuuchi; Fumio Yoshii

1996-01-01

The effect of Hevea latex proteins on the aging properties of radiation vulcanized natural rubber latex (RVNRL) was investigated. Unpurified RVNRL films exhibited better aging properties than the purified RVNRL films. A sharp decrease in tensile strength was observed after aging when RVNRL films were leached in 1% NH sub 4 OH. However, when these films were soaked in ethanol prior to leaching, the aging properties approximated those of the unleached samples. Kjeldahl and FT-IR analyses of the leached and unleached RVNRL films indicated a higher protein content for both the unleached and ethanol-soaked films than for leached films. Electrophoretic analysis of the proteins present in the NH, extracts of leached RVNRL films showed a high concentration of hevein. This protein was not found in the ATH, extracts of ethanol soaked films. Hevein was shown to improve the aging properties of RVNRL

Work, obesity, and occupational safety and health.

Science.gov (United States)

Schulte, Paul A; Wagner, Gregory R; Ostry, Aleck; Blanciforti, Laura A; Cutlip, Robert G; Krajnak, Kristine M; Luster, Michael; Munson, Albert E; O'Callaghan, James P; Parks, Christine G; Simeonova, Petia P; Miller, Diane B

2007-03-01

There is increasing evidence that obesity and overweight may be related, in part, to adverse work conditions. In particular, the risk of obesity may increase in high-demand, low-control work environments, and for those who work long hours. In addition, obesity may modify the risk for vibration-induced injury and certain occupational musculoskeletal disorders. We hypothesized that obesity may also be a co-risk factor for the development of occupational asthma and cardiovascular disease that and it may modify the worker's response to occupational stress, immune response to chemical exposures, and risk of disease from occupational neurotoxins. We developed 5 conceptual models of the interrelationship of work, obesity, and occupational safety and health and highlighted the ethical, legal, and social issues related to fuller consideration of obesity's role in occupational health and safety.

[Study the impacts of diagnosis on occupational noise-induced deafness after bring into the different high frequency hearing threshold weighted value].

Science.gov (United States)

Xue, L J; Yang, A C; Chen, H; Huang, W X; Guo, J J; Liang, X Y; Chen, Z Q; Zheng, Q L

2017-11-20

Objective: Study of the results and the degree on occupational noise-induced deafness in-to the different high frequency hearing threshold weighted value, in order to provide theoretical basis for the re-vision of diagnostic criteria on occupational noise-induced deafness. Methods: A retrospective study was con-ducted to investigate the cases on the diagnosis of occupational noise-induced deafness in Guangdong province hospital for occupational disease prevention and treatment from January 2016 to January 2017. Based on the re-sults of the 3 hearing test for each test interval greater than 3 days in the hospital, the best threshold of each frequency was obtained, and based on the diagnostic criteria of occupational noise deafness in 2007 edition, Chi square test, t test and variance analysis were used to measure SPSS21.0 data, their differences are tested among the means of speech frequency and the high frequency weighted value into different age group, noise ex-posure group, and diagnostic classification between different dimensions. Results: 1. There were totally 168 cases in accordance with the study plan, male 154 cases, female 14 cases, the average age was 41.18 ±6.07 years old. 2. The diagnosis rate was increased into the weighted value of different high frequency than the mean value of pure speech frequency, the weighted 4 kHz frequency increased by 13.69% (χ(2)=9.880, P =0.002) , 6 kHz increased by 15.47% (χ(2)=9.985, P =0.002) and 4 kHz+6 kHz increased by15.47% (χ(2)=9.985, P =0.002) , the difference was statistically significant. The diagnostic rate of different high threshold had no obvious differ-ence between the genders. 3. The age groups were divided into less than or equal to 40years old group (A group) and 40-50 years old group (group B) , there were higher the diagnostic rate between high frequency weighted 4 kHz (A group χ(2)=3.380, P =0.050; B group χ(2)=4.054, P =0.032) , weighted 6 kHz (A group χ(2)=6.362, P =0.012; B group χ(2

Sulfonated macro-RAFT agents for the surfactant-free synthesis of cerium oxide-based hybrid latexes

NARCIS (Netherlands)

Garnier, J.; Warnant, J.; Lacroix-Desmazes, P.; Dufils, P.E.; Vinas, J.; Herk, van A.M.

2013-01-01

Three types of amphiphatic macro-RAFT agents were employed as compatibilizers to promote the polymerization reaction at the surface of nanoceria for the synthesis of CeO2-based hybrid latexes. Macro-RAFT copolymers and terpolymers were first synthesized employing various combinations of butyl

Improved meet-in-the-middle attacks on reduced-round Piccolo

DEFF Research Database (Denmark)

Liu, Ya; Cheng, Liang; Liu, Zhiqiang

2018-01-01

Piccolo is a lightweight block cipher that adopts a generalized Feistel network structure with 4 branches, each of which is 16 bit long. The key length is 80 or 128 bit, denoted by Piccolo-80 and Piccolo-128, respectively. In this paper, we mounted meet-in-the-middle attacks on 14-round Piccolo-80...... and at the end, respectively. Based on this structure, we mounted an attack on 14-round Piccolo-80 from the 5th round to the 18th round. The data, time, and memory complexities were 252 chosen plaintexts, 267.44 encryptions, and 264.91 blocks, respectively. For Piccolo-128, we built a 7-round distinguisher...... to attack 18-round Piccolo-128 from the 4th round to the 21st round. The data, time, and memory complexities were 252 chosen plaintexts, 2126.63 encryptions, and 2125.29 blocks, respectively. If not considering results on biclique cryptanalysis, these are currently the best public results on this reduced...

Rounding, work intensification and new public management.

Science.gov (United States)

Willis, Eileen; Toffoli, Luisa; Henderson, Julie; Couzner, Leah; Hamilton, Patricia; Verrall, Claire; Blackman, Ian

2016-06-01

In this study, we argue that contemporary nursing care has been overtaken by new public management strategies aimed at curtailing budgets in the public hospital sector in Australia. Drawing on qualitative interviews with 15 nurses from one public acute hospital with supporting documentary evidence, we demonstrate what happens to nursing work when management imposes rounding as a risk reduction strategy. In the case study outlined rounding was introduced across all wards in response to missed care, which in turn arose as a result of work intensification produced by efficiency, productivity, effectiveness and accountability demands. Rounding is a commercially sponsored practice consistent with new public management. Our study illustrates the impact that new public management strategies such as rounding have on how nurses work, both in terms of work intensity and in who controls their labour. © 2015 John Wiley & Sons Ltd.

Purification of papain from fresh latex of Carica papaya

Directory of Open Access Journals (Sweden)

Rubens Monti

2000-01-01

Full Text Available In the present study we wish to report a method of crystallizing papain from fresh papaya latex which gave higher yields than previously reported. This method does not involve the use of sulphydryl reagents. The papain thus obtained is practically pure and shows a single band when submitted to electrophoresis on polyacrylamide gel, and is identical to the papain obtained by other methods. In routine enzymatic assays, specific activity was measured using Z-gly-pNP and BAEE as substrates. Papain crystallized by this method, without the use of high concentrations of salts or thiol-containing substances such as cysteine and dithiothreitol, is obtained in the form of a complex with natural inhibitors existent in latex which can be removed by dialysis.No presente trabalho apresenta-se um método de cristalização da papaína oriunda do látex fresco de mamão, o qual apresenta uma alta produtividade em relação aos métodos previamente descritos. A metodologia aqui descrita não envolve o uso de reagentes sulfidrílicos, a papaína foi obtida de forma praticamente pura, apresentando uma simples banda quando submetida a eletroforese, e com propriedades idênticas àquelas obtidas por outros métodos. A atividade específica foi determinada utilizando Z-gly-pNP e BAEE como substrato. A papaína obtida por essa metodologia, sem uso de substâncias tais como cisteína e ditiotreitol, apresenta-se na forma de um complexo com inibidores naturais, os quais podem ser removidos por diálise.

A Mixed Application of Geographically Weighted Regression and Unsupervised Classification for Analyzing Latex Yield Variability in Yunnan, China

Directory of Open Access Journals (Sweden)

Oh Seok Kim

2017-05-01

Full Text Available This paper introduces a mixed method approach for analyzing the determinants of natural latex yields and the associated spatial variations and identifying the most suitable regions for producing latex. Geographically Weighted Regressions (GWR and Iterative Self-Organizing Data Analysis Technique (ISODATA are jointly applied to the georeferenced data points collected from the rubber plantations in Xishuangbanna (in Yunnan province, south China and other remotely-sensed spatial data. According to the GWR models, Age of rubber tree, Percent of clay in soil, Elevation, Solar radiation, Population, Distance from road, Distance from stream, Precipitation, and Mean temperature turn out statistically significant, indicating that these are the major determinants shaping latex yields at the prefecture level. However, the signs and magnitudes of the parameter estimates at the aggregate level are different from those at the lower spatial level, and the differences are due to diverse reasons. The ISODATA classifies the landscape into three categories: high, medium, and low potential yields. The map reveals that Mengla County has the majority of land with high potential yield, while Jinghong City and Menghai County show lower potential yield. In short, the mixed method can offer a means of providing greater insights in the prediction of agricultural production.

Environmental and occupational health research and training needs in Colombia: A Delphi study.

Science.gov (United States)

Rodríguez-Villamizar, Laura A; González, Beatriz Elena; Vera, Lina María; Patz, Jonathan; Bautista, Leonelo E

2015-08-01

Environmental factors contribute with 16% of the burden of disease in Colombia. A main obstacle in implementing national and regional environmental and occupational health policies is the limited knowledge on the local ability to study and control the impact of harmful exposures on health. To identify needs for research and training in environmental and occupational health in Colombia. We conducted a three-round hybrid Delphi study. A group of environmental and occupational health Colombian experts (n=16) from government agencies, universities, and research centers was recruited to participate in the study. Expert´s opinions on research and training needs were gathered through online questionnaires, followed by an in-person meeting. The percentage of agreement and the coefficient of variation were used to measure consensus. Air pollution and chemical products were considered the most important environmental and occupational exposures, due to their significant impact on chronic non-communicable diseases, such as respiratory diseases, cardiovascular diseases, and cancer. Research on the effects of outdoor air pollution on cardiovascular and respiratory diseases was considered of the greatest importance. Priority training areas included environmental and occupational health risk assessment, exposure modeling, advanced statistical methods, urban planning, occupational safety and hygiene, and epidemiology and toxicology. These findings provide a valuable input for the definition and implementation of national environmental and occupational health policies and for the development of a regional hub aimed at strengthening the capacity for research and training in Colombia.

Environmental and occupational health research and training needs in Colombia: A Delphi study

Science.gov (United States)

Rodríguez-Villamizar, Laura A.; González, Beatriz Elena; Vera, Lina María; Patz, Jonathan; Bautista, Leonelo E.

2015-01-01

Introduction Environmental factors contribute with 16% of the burden of disease in Colombia. A main obstacle in implementing national and regional environmental and occupational health policies is the limited knowledge on the local ability to study and control the impact of harmful exposures on health. Objective To identify needs for research and training in environmental and occupational health in Colombia. Materials and methods We conducted a three-round hybrid Delphi study. A group of environmental and occupational health Colombian experts (n=16) from government agencies, universities, and research centers was recruited to participate in the study. Expert’s opinions on research and training needs were gathered through online questionnaires, followed by an in-person meeting. The percentage of agreement and the coefficient of variation were used to measure consensus. Results Air pollution and chemical products were considered the most important environmental and occupational exposures, due to their significant impact on chronic non-communicable diseases, such as respiratory diseases, cardiovascular diseases, and cancer. Research on the effects of outdoor air pollution on cardiovascular and respiratory diseases was considered of the greatest importance. Priority training areas included environmental and occupational health risk assessment, exposure modeling, advanced statistical methods, urban planning, occupational safety and hygiene, and epidemiology and toxicology. Conclusions These findings provide a valuable input for the definition and implementation of national environmental and occupational health policies and for the development of a regional hub aimed at strengthening the capacity for research and training in Colombia. PMID:26535742

On Round-off Error for Adaptive Finite Element Methods

KAUST Repository

Alvarez-Aramberri, J.

2012-06-02

Round-off error analysis has been historically studied by analyzing the condition number of the associated matrix. By controlling the size of the condition number, it is possible to guarantee a prescribed round-off error tolerance. However, the opposite is not true, since it is possible to have a system of linear equations with an arbitrarily large condition number that still delivers a small round-off error. In this paper, we perform a round-off error analysis in context of 1D and 2D hp-adaptive Finite Element simulations for the case of Poisson equation. We conclude that boundary conditions play a fundamental role on the round-off error analysis, specially for the so-called ‘radical meshes’. Moreover, we illustrate the importance of the right-hand side when analyzing the round-off error, which is independent of the condition number of the matrix.

On Round-off Error for Adaptive Finite Element Methods

KAUST Repository

Alvarez-Aramberri, J.; Pardo, David; Paszynski, Maciej; Collier, Nathan; Dalcin, Lisandro; Calo, Victor M.

2012-01-01

Round-off error analysis has been historically studied by analyzing the condition number of the associated matrix. By controlling the size of the condition number, it is possible to guarantee a prescribed round-off error tolerance. However, the opposite is not true, since it is possible to have a system of linear equations with an arbitrarily large condition number that still delivers a small round-off error. In this paper, we perform a round-off error analysis in context of 1D and 2D hp-adaptive Finite Element simulations for the case of Poisson equation. We conclude that boundary conditions play a fundamental role on the round-off error analysis, specially for the so-called ‘radical meshes’. Moreover, we illustrate the importance of the right-hand side when analyzing the round-off error, which is independent of the condition number of the matrix.

Association Between ICU Admission During Morning Rounds and Mortality

Science.gov (United States)

Gajic, Ognjen; Morales, Ian J.; Keegan, Mark T.; Peters, Steve G.; Hubmayr, Rolf D.

2009-01-01

Background: No previous study has evaluated the association between admission to ICUs during round time and patient outcome. The objective of this study was to determine the association between round-time ICU admission and patient outcome. Methods: This retrospective study included 49,844 patients admitted from October 1994 to December 2007 to four ICUs (two surgical, one medical, and one multispecialty) of an academic medical center. Of these patients, 3,580 were admitted to the ICU during round time (8:00 am to 10:59 am) and 46,264 were admitted during nonround time (from 1:00 pm to 6:00 am). The medical ICU had 24-h/7-day per week intensivist coverage during the last 2 years of the study. We compared the baseline characteristics and outcome of patients admitted to the ICU between the two groups. Data were abstracted from the acute physiology and chronic health evaluation (APACHE) III database. Results: The round-time and non-round-groups were similar in gender, ethnicity, and age. The predicted hospital mortality rate of the round time group was higher (17.4% vs 12.3% predicted, respectively; p < 0.001). The hospital length of stay was similar between the two groups. The round-time group had a higher hospital mortality rate (16.2% vs 8.8%, respectively; p < 0.001). Most of the round-time ICU admissions and deaths occurred in the medical ICU. Round-time admission was an independent risk factor for hospital death (odds ratio, 1.321; 95% CI, 1.178 to 1.481). This independent association was present for the whole study period except for the last 2 years. Conclusions: Patients admitted to the ICU during morning rounds have higher severity of illness and mortality rates. PMID:19505985

India and the Tokyo round

OpenAIRE

André Sapir; Robert Baldwin

1983-01-01

The paper attempts to quantify the gains and the losses for India from the changes in import tariffs decided during the Tokyo Round of Multilateral Trade Negotiations. The study focuses on exports to the ECCC, Japan, and the US. It is conducted at the tariff line level and uses the actual tariffs resulting from the Tokyo Round. The evaluation is in terms of the static effect of the tariff changes. The results indicate that the gains for India from most-favoured nation tariff cuts far outweigh...

Rounding errors in weighing

International Nuclear Information System (INIS)

Jeach, J.L.

1976-01-01

When rounding error is large relative to weighing error, it cannot be ignored when estimating scale precision and bias from calibration data. Further, if the data grouping is coarse, rounding error is correlated with weighing error and may also have a mean quite different from zero. These facts are taken into account in a moment estimation method. A copy of the program listing for the MERDA program that provides moment estimates is available from the author. Experience suggests that if the data fall into four or more cells or groups, it is not necessary to apply the moment estimation method. Rather, the estimate given by equation (3) is valid in this instance. 5 tables

Dynamic speciation analysis of atrazine in aqueous latex nanoparticle dispersions using solid phase microextraction (SPME)

NARCIS (Netherlands)

Benhabib, K.; Town, R.M.; Leeuwen, van H.P.

2009-01-01

Solid phase microextraction (SPME) is applied in the dynamic speciation analysis of the pesticide atrazine in an aqueous medium containing sorbing latex nanoparticles. It is found that the overall rate of extraction of the analyte is faster than in the absence of nanoparticles and governed by the

Spatial occupancy models for large data sets