WorldWideScience

Sample records for rotating treatment tables

  1. Prevention of deep venous thrombosis in patients with acute spinal cord injuries: use of rotating treatment tables

    International Nuclear Information System (INIS)

    Becker, D.M.; Gonzalez, M.; Gentili, A.; Eismont, F.; Green, B.A.

    1987-01-01

    A randomized clinical trial of 15 patients with acute spinal cord injuries was performed to test the hypothesis that rotating treatment tables prevent deep venous thrombosis in this population. Four of 5 control (nonrotated) patients developed distal and proximal thrombi, assessed by 125 I fibrinogen leg scans and impedance plethysmography. In comparison, only 1 of 10 treated (rotated) patients developed both distal and proximal thrombosis. These results suggest but do not prove that rotating treatment tables prevent the development of proximal deep venous thrombosis in spinal cord-injured patients. Larger clinical trials are needed to confirm this heretofore undocumented benefit of rotating treatment tables

  2. Isocentric rotational performance of the Elekta Precise Table studied using a USB-microscope

    DEFF Research Database (Denmark)

    Riis, Hans L; Zimmermann, Sune J; Riis, Poul

    2010-01-01

    The isocentric three-dimensional performance of the Elekta Precise Table was investigated. A pointer was attached to the radiation head of the accelerator and positioned at the geometric rotational axis of the head. A USB-microscope was mounted on the treatment tabletop to measure the table...... position relative to the pointer tip. The table performance was mapped in terms of USB-microscope images of the pointer tip at different table angles and load configurations. The USB-microscope was used as a detector to measure the pointer tip positions with a resolution down to 0.01 mm. A new elastic...

  3. Perturbative treatment of nuclear rotations

    International Nuclear Information System (INIS)

    Civitarese, O.

    1980-01-01

    In this work, it is described the case corresponding to perturbative quantum treatment of a fermion system in free rotation and the divergences which resulted from the 'break' in symmetry, associated by the adoption of a deformed basis as a non pertubed solution. (A.C.A.S.) [pt

  4. Decrease in Accuracy of a Rotational SINS Caused by its Rotary Table's Errors

    Directory of Open Access Journals (Sweden)

    Pin Lv

    2014-05-01

    Full Text Available We call a strapdown inertial navigation system (SINS that uses the rotation auto-compensation technique (which is a common method to reduce the effect of the bias errors of inertial components a ‘rotational SINS’. In a rotational SINS, the rotary table is an important component, rotating the inertial sensor assembly back and forth in azimuth to accomplish error modulation. As a consequence of the manufacturing process, errors may exist in rotary tables which decrease the navigation accuracy of rotational SINSs. In this study, the errors of rotary tables are considered in terms of installation error, wobble error and angular error, and the models of these errors are established for the rotational SINS. Next, the propagation characteristics of these errors in the rotational SINS are analysed and their effects on navigation results are discussed. Finally, the theoretical conclusions are tested by numerical simulation. This paper supplies a good reference for the development of low-cost rotational SINSs, which usually have low accuracy rotary tables and which may be used in robots, intelligent vehicles and unmanned aerial vehicles (UAVs.

  5. Dosimetric Effects Of Different Treatment Tables During Radiotherapy

    International Nuclear Information System (INIS)

    Murkovic, M.; Grego, T.; Bibic, J.

    2015-01-01

    The aim of our study was to measure the effect of mega-voltage photon beam attenuation when treating patients through carbon fibre treatment table with and without the carbon laminate base plate on it. We also examined the ability of XiO treatment planning system in modelling this effect. Direct attenuation measurements were made for two treatment tables, Siemens TxT 550 treatment table with TT-A table top and Elekta Precise table with iBEAM evo table top. On both treatment tables we used Orfit Base Plate (32301). Measurements were taken for two photon energies (6 MV and 18 MV), at two different field sizes (5 x 5 cm 2 and 10 x 10 cm 2 ) and different gantry angles in 50 intervals using stationary water phantom and Farmer type ionization chamber. These values were compared to values calculated in XiO. In order to account for the effect of table and base plate during treatment planning in XiO, customized table and base plate templates were develop in Focal planning system. To construct these customized templates, table and base plate contours as well as respective relative electron density's to water were obtained on CT scanner. The largest attenuation effect was seen for oblique treatment angles using low energy and small field sizes, 6.6 percent for the Elekta table top and 8.4 percent for Siemens table top. In this paper we show that customized table and base plate templates introduced in the patient treatment plan can accurately model the attenuation due to their presence to within 0.3 percent. Since dose modifications due to such carbon fiber accessories can be significant, it can be concluded that introduction of customized table and base plate templates into TPS brings an important improvement to patient treatment planning, and should be included in dose calculations whenever possible. (author).

  6. Optimization of rotational radiotherapy treatment planning

    International Nuclear Information System (INIS)

    Tulovsky, Vladimir; Ringor, Michael; Papiez, Lech

    1995-01-01

    Purpose: Rotational therapy treatment planning for rotationally symmetric geometry of tumor and healthy tissue provides an important example of testing various approaches to optimizing dose distributions for therapeutic x-ray irradiations. In this article, dose distribution optimization is formulated as a variational problem. This problem is solved analytically and numerically. Methods and Materials: The classical Lagrange method is used to derive equations and inequalities that give necessary conditions for minimizing the mean-square deviation between the ideal dose distribution and the achievable dose distribution. The solution of the resulting integral equation with Cauchy kernel is used to derive analytical formulas for the minimizing irradiation intensity function. Results: The solutions are evaluated numerically and the graphs of the minimizing intensity functions and the corresponding dose distributions are presented. Conclusions: The optimal solutions obtained using the mean-square criterion lead to significant underdosage in some areas of the tumor volume. Possible solutions to this shortcoming are investigated and medically more appropriate criteria for optimization are proposed for future investigations

  7. Two-View Gravity Stress Imaging Protocol for Nondisplaced Type II Supination External Rotation Ankle Fractures: Introducing the Gravity Stress Cross-Table Lateral View.

    Science.gov (United States)

    Boffeli, Troy J; Collier, Rachel C; Gervais, Samuel J

    Assessing ankle stability in nondisplaced Lauge-Hansen supination external rotation type II injuries requires stress imaging. Gravity stress mortise imaging is routinely used as an alternative to manual stress imaging to assess deltoid integrity with the goal of differentiating type II from type IV injuries in cases without a posterior or medial fracture. A type II injury with a nondisplaced fibula fracture is typically treated with cast immobilization, and a type IV injury is considered unstable and often requires operative repair. The present case series (two patients) highlights a standardized 2-view gravity stress imaging protocol and introduces the gravity stress cross-table lateral view. The gravity stress cross-table lateral view provides a more thorough evaluation of the posterior malleolus owing to the slight external rotation and posteriorly directed stress. External rotation also creates less bony overlap between the tibia and fibula, allowing for better visualization of the fibula fracture. Gravity stress imaging confirmed medial-sided injury in both cases, confirming the presence of supination external rotation type IV or bimalleolar equivalent fractures. Open reduction and internal fixation was performed, and both patients achieved radiographic union. No further treatment was required at 21 and 33 months postoperatively. Copyright © 2017 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  8. Water Table Management Reduces Tile Nitrate Loss in Continuous Corn and in a Soybean-Corn Rotation

    Directory of Open Access Journals (Sweden)

    Craig F. Drury

    2001-01-01

    Full Text Available Water table management systems can be designed to alleviate soil water excesses and deficits, as well as reduce nitrate leaching losses in tile discharge. With this in mind, a standard tile drainage (DR system was compared over 8 years (1991 to 1999 to a controlled tile drainage/subirrigation (CDS system on a low-slope (0.05 to 0.1% Brookston clay loam soil (Typic Argiaquoll in southwestern Ontario, Canada. In the CDS system, tile discharge was controlled to prevent excessive drainage, and water was pumped back up the tile lines (subirrigation to replenish the crop root zone during water deficit periods. In the first phase of the study (1991 to 1994, continuous corn (Zea mays, L. was grown with annual nitrogen (N fertilizer inputs as per local soil test recommendations. In the second phase (1995 to 1999, a soybean (Glycine max L., Merr.-corn rotation was used with N fertilizer added only during the two corn years. In Phase 1 when continuous corn was grown, CDS reduced total tile discharge by 26% and total nitrate loss in tile discharge by 55%, compared to DR. In addition, the 4-year flow weighted mean (FWM nitrate concentration in tile discharge exceeded the Canadian drinking water guideline (10 mg N l–1 under DR (11.4 mg N l–1, but not under CDS (7.0 mg N l–1. In Phase 2 during the soybean-corn rotation, CDS reduced total tile discharge by 38% and total nitrate loss in tile discharge by 66%, relative to DR. The 4-year FWM nitrate concentration during Phase 2 in tile discharge was below the drinking water guideline for both DR (7.3 mg N l–1 and CDS (4.0 mg N l–1. During both phases of the experiment, the CDS treatment caused only minor increases in nitrate loss in surface runoff relative to DR. Hence CDS decreased FWM nitrate concentrations, total drainage water loss, and total nitrate loss in tile discharge relative to DR. In addition, soybean-corn rotation reduced FWM nitrate concentrations and total nitrate loss in tile discharge

  9. Table-top rotating turbulence : an experimental insight through Particle Tracking

    NARCIS (Netherlands)

    Castello, Del L.

    2010-01-01

    The influence of the Earth background rotation on oceanic and atmospheric currents, as well as the effects of a rapid rotation on the flow inside industrial machineries like mixers, turbines, and compressors, are only the most typical examples of fluid flows affected by rotation. Despite the

  10. Assessment and treatment strategies for rotator cuff tears

    Science.gov (United States)

    Al-Hakim, Wisam; Noorani, Ali

    2014-01-01

    Tears of the rotator cuff are common and becoming an increasingly frequent problem. There is a vast amount of literature on the merits and limitations of the various methods of clinical and radiological assessment of rotator cuff tears. This is also the case with regard to treatment strategies. Certain popular beliefs and principles practiced widely and the basis upon which they are derived may be prone to inaccuracy. We provide an overview of the historical management of rotator cuff tears, as well as an explanation for how and why rotator cuff tears should be managed, and propose a structured methodology for their assessment and treatment. PMID:27582960

  11. Treatment Alternative for Irreparable Rotator Cuff Ruptures ...

    African Journals Online (AJOL)

    2016-09-03

    Sep 3, 2016 ... and such ruptures also lead to a pseudo-paralysis.[1,2]. Pain during daily ... 2) repairable rotator cuff rupture, as determined on MRI and during arthroscopy ..... functioning and lead to cosmetic deformities.[4]. Arthroplasty is a ...

  12. Optimization of multi-slice helical respiration-correlated CT: the effects of table speed and rotation time

    International Nuclear Information System (INIS)

    Wink, Nicole M; McNitt-Gray, Michael F; Solberg, Timothy D

    2005-01-01

    While respiration-correlated CT is gaining acceptance in clinical radiotherapy, the effect of scanning parameters on the image quality has yet to be addressed. The intent of this study was to characterize the effects of gantry rotation and table speed on various image quality characteristics in multi-slice, helical, retrospectively-gated CT images. Images of stationary and moving phantoms were obtained in helical mode on a 20-slice CT scanner. Motion was generated by a computer-controlled platform capable of moving simultaneously in two dimensions. Motion was monitored using a pressure gauge inserted inside an adjustable belt. Selected scans were retrospectively gated into ten phases based on the monitored motion. Gantry rotation speeds of 0.5 s and 1.0 s were evaluated with pitches ranging from 0.1 to 0.45. Several parameters, including calculated object volumes, trajectory (movement from peak to trough), deformation (actual volume divided by volume created with the maximum diameter of contoured object) and z-axis resolution, were used to characterize image quality. These studies indicate that for objects in the peak phase of a movement pattern that simulates breathing, retrospectively gated scans using fast gantry rotation speeds produce volume, trajectory, deformation and z-axis resolution results comparable with those of a stationary object

  13. Impact of MCNP unresolved resonance probability-table treatment on uranium and plutonium benchmarks

    International Nuclear Information System (INIS)

    Mosteller, R.D.; Little, R.C.

    1998-01-01

    Versions of MCNP up through and including 4B have not accurately modeled neutron self-shielding effects in the unresolved resonance energy region. Recently, a probability-table treatment has been incorporated into a developmental version of MCNP. This paper presents MCNP results for a variety of uranium and plutonium critical benchmarks, calculated with and without the probability-table treatment

  14. Impact of MCNP Unresolved Resonance Probability-Table Treatment on Uranium and Plutonium Benchmarks

    International Nuclear Information System (INIS)

    Mosteller, R.D.; Little, R.C.

    1999-01-01

    A probability-table treatment recently has been incorporated into an intermediate version of the MCNP Monte Carlo code named MCNP4XS. This paper presents MCNP4XS results for a variety of uranium and plutonium criticality benchmarks, calculated with and without the probability-table treatment. It is shown that the probability-table treatment can produce small but significant reactivity changes for plutonium and 233 U systems with intermediate spectra. More importantly, it can produce substantial reactivity increases for systems with large amounts of 238 U and intermediate spectra

  15. MoDOT pavement preservation research program volume VI, pavement treatment trigger tables/decision trees and treatment candidate selection process.

    Science.gov (United States)

    2015-10-01

    The objective of Task 5 was the development of pavement treatment trigger tables and the treatment candidate selection process. : The input to the trigger tables entails such factors as an overall condition indicator, smoothness, individual distress ...

  16. Delayed treatment of decompression sickness with short, no-air-break tables: review of 140 cases.

    Science.gov (United States)

    Cianci, Paul; Slade, John B

    2006-10-01

    Most cases of decompression sickness (DCS) in the U.S. are treated with hyperbaric oxygen using U.S. Navy Treatment Tables 5 and 6, although detailed analysis shows that those tables were based on limited data. We reviewed the development of these protocols and offer an alternative treatment table more suitable for monoplace chambers that has proven effective in the treatment of DCS in patients presenting to our facility. We reviewed the outcomes for 140 cases of DCS in civilian divers treated with the shorter tables at our facility from January 1983 through December 2002. Onset of symptoms averaged 9.3 h after surfacing. At presentation, 44% of the patients demonstrated mental aberration. The average delay from onset of symptoms to treatment was 93.5 h; median delay was 48 h. Complete recovery in the total group of 140 patients was 87%. When 30 patients with low probability of DCS were excluded, the recovery rate was 98%. All patients with cerebral symptoms recovered. Patients with the highest severity scores showed a high rate of complete recovery (97.5%). Short oxygen treatment tables as originally described by Hart are effective in the treatment of DCS, even with long delays to definitive recompression that often occur among civilian divers presenting to a major Divers Alert Network referral center.

  17. [Surgical treatment of pronation and supination external rotation trimalleolar fractures].

    Science.gov (United States)

    Xu, Ye-qing; Zhan, Bei-lei; He, Fei-xiong; Wei, Hong-da

    2008-04-01

    To explore the operative method and its clinical effects of pronation and supination external rotation trimalleolar fractures. From March 2000 to July 2006,42 patients of the pronation and supination external rotation trimalleolar fractures treated with open reduction and internal fixation. Thirty-one were males and 11 were females,with an average age of 40.5 years (from 19 to 76 years). Four cases were open fractures and 38 cases close fractures. The fractures were classified as pronation-external rotation (grade IV) injury in 18 cases and supination-external rotation (grade IV)in 24 cases according to the system of Lauge-Hansen. The time of injury to operation was 2 hours to 27 days. The medial, lateral and posterior malleolus were exposed by standard anteromedial and Gatellier-Chastang approaches. The reduction and internal fixation started with the posterior,then the medial and the lateral malleolus and distal tibiofibular syndesmosis in sequence. The anteroposterior, lateral and mostise X-ray films were taken after operation. All the patients were followed up for an average time of 13.5 months(from 6 to 24 months). The time of union was from 12 to 16 weeks. The results were excellent in 20,good in 16, fair in 4 and poor in 2 cases according to Baird-Jackson ankle scoring system based on pain, stability, walking ability,range of motion and radiological manifestations. The excellent and good rate was 85.7%. There were no infection,malunion and nonunion of the fractures except that the inserted screw to distal tibiofibular syndesmosis was broken in 1 case. The key of operative treatment is to restore the anatomy of ankle and to regain the ankle function maximally.

  18. Preliminary Study of Greywater Treatment through Rotating Biological Contactor

    Directory of Open Access Journals (Sweden)

    Ashfaq Ahmed Pathan

    2011-07-01

    Full Text Available The characteristics of the greywater vary from country to country and it depends upon the cultural and social behavior of the respective country. There was a considerable need to characterize and recycle the greywater. In this regard greywater was separated from the black water and analyzed for various physiochemical parameters. Among various greywater recycling treatment technologies, RBC (Rotating Biological Contactor is more effective treatment technique in reducing COD (Chemical Oxygen Demand and organic matters from the greywater. But this technology was not applied and tested in Pakistan. There was extensive need to investigate the RBC technology for greywater recycling at small scale before applying at mass scale. To treat the greywater, a single-stage RBC simulator was designed and developed at laboratory scale. An electric motor equipped with gear box to control the rotations of the disks was mounted on the tank. The simulator was run at the rate of 1.7 rpm. The disc area of the RBC was immersed about 40% in the greywater. Water samples were collected at each HRT (Hydraulic Retention Time and analyzed for the parameters such as pH, conductivity, TDS (Total Dissolved Solids, salinity, BOD5 (Biochemical Oxygen Demand, COD and suspended solids by using standard methods. The results are encouraging with percentage removal of BOD5 and COD being 53 and 60% respectively.

  19. Treatment of Antibiotic Pharmaceutical Wastewater Using a Rotating Biological Contactor

    Directory of Open Access Journals (Sweden)

    Rongjun Su

    2015-01-01

    Full Text Available Rotating biological contactors (RBC are effective for treating wastewater, while they are rarely reported to be used for treating antibiotic pharmaceutical wastewater (APW. The current study investigates treatment of APW using an RBC. The effects of influent concentration, number of stages, and temperature on the remediation of APW were studied. The results indicated, even at low ambient temperature, 45% COD and 40% NH4+-N removal efficiencies. Moreover, the BOD5 removal efficiency was 85%. Microscopic observations illustrated that there were various active microorganisms displayed in the biofilms and their distribution changed from stage to stage. Compared with activated sludge, the biofilms in this study have higher content of dry matter and are easier to dehydrate and settle. Compared with current commercial incineration processes or advanced oxidation processes, RBC can greatly reduce the treatment cost. This research shows RBC is effective for such an inherently biorecalcitrant wastewater even at low ambient temperature.

  20. Determination of tolerances in the positioning of the treatment table from an image-guided system

    International Nuclear Information System (INIS)

    Perez Moreno, J. M.; Zucca Aparicio, D.; Fernandez leton, P.; Garcia Ruiz-Zorrilla, J.; Minanbres Moro, A.

    2011-01-01

    The use of techniques of image-guided radiotherapy (TGRT) aims to reduce the uncertainties associated with patient positioning. One of the techniques more recent development is the cone beam CT (CBCT), consisting of the acquisition of volumetric images of the patient by a detector integrated into the linear accelerator. By analyzing the results of all sessions of treatment to all patients in which the positioning has been carried out with image-guided system MV CBCT have been determined tolerance tables for translational coordinates of the table treatment based on pathology and immobilization system used. (Author)

  1. Rotational Distraction for the Treatment of Severe Mandibular Retrognathia.

    Science.gov (United States)

    Ito, Osamu; Mitsugi, Masaharu; Alcalde, Rafael E; Yano, Tomoyuki; Uemura, Noriko; Okazaki, Mutsumi

    2015-07-01

    The main problem with intraoral distraction of the mandible is the inability to achieve the three-dimensional mandibular correction as planned preoperatively. We developed a technique that allows spontaneous changes in the direction of mandibular elongation using an intraoral distractor. After mandibular osteotomy, the distractor is fixed to the distal segment of the mandible using a single bicortical screw, allowing anterior-posterior, vertical and limited lateromedial changes in the vector of distraction. Mandibular lengthening is performed while keeping the maxilla and mandible in class I occlusion with intermaxillary fixation. As the distraction device is activated allowing mandibular elongation, the proximal segment, guided by the surrounding soft tissues, moves and rotates posterosuperiorly. Mandibular lengthening is continued until the condylar head reaches an adequate position in the mandibular fossa as confirmed clinically and radiographically. Thirty-three patients with mandibular retrognathia received this treatment and good results were obtained.

  2. ARTHROSCOPIC TREATMENT OF CALCIFYING TENDINITIS OF THE ROTATOR CUFF.

    Science.gov (United States)

    Neto, Arnaldo Amado Ferreira; Trevizani, Cassio Silva; Benegas, Eduardo; Malavolta, Eduardo Angeli; Gracitelli, Mauro Emílio Conforto; Bitar, Alexandre Carneiro; Neto, Francisco José Dos Santos

    2010-01-01

    To evaluate the clinical and radiographic results from arthroscopic surgical treatment of the rotator cuff in patients with calcifying tendinitis. A retrospective study was conducted on twenty patients who underwent arthroscopic treatment for calcifying tendinitis of the shoulder between March 1999 and November 2005. Six patients were excluded due to loss of follow-up. The average follow-up period was 41.4 months. Eight patients (57%) were female and six (43%) were male. The right side was affected in 10 cases (71%) and the left in four cases (29%). Nine cases (64%) had calcification in the supraspinatus tendon, two (14%) in the infraspinatus tendon, and three (21%) in both tendons. In all cases, resection of the calcium deposits was performed by means of a needle (Jelco® No. 14) in combination with curettage (mini-curette). Two shoulders (14%) underwent subacromial decompression, and one (7%) underwent excision of the distal clavicle. A tendon-tendon suture was performed in three shoulders (21%). None of the patients underwent tendon-bone reinsertion. The mean score obtained on the UCLA scale was 33 points (26-35), thus indicating that a majority of patients had good results. In the final radiographic evaluation, none of the patients showed signs of calcification. Arthroscopic treatment of calcifying tendinitis of the shoulder safely allows excision of the calcification, leading to good results in relation to shoulder pain and function.

  3. Rotator cuff disease – basics of diagnosis and treatment

    Directory of Open Access Journals (Sweden)

    Robert E. Boykin

    2010-03-01

    Full Text Available Rotator cuff (RTC disease is a particularly prevalent cause of shoulder pain and weakness presenting to primary care physicians, internists, rheumatologists, and orthopedists. An understanding of the anatomy of the RTC tendons and the underlying pathogenesis aids in the diagnosis, which is based largely on history and specific physical examination tests. Imaging may further define the pathology and aid in the evaluation of other sources of shoulder pain. Injuries to the RTC range from tendonitis to partial thickness tears to full thickness tears. The majority of patients with impingement and some cases of partial thickness tears may be managed effectively with non-operative measures including non-steroidal anti-inflammatory drugs, local injections, and physical therapy. Predictors of a good outcome with non-operative treatment include pre-injury strength, ability to raise the arm to the level of the shoulder, and a more acute presentation. Persistent symptoms may require operative intervention including debridement, subacromial decompression, and/or RTC repair. Acute full thickness tears in younger patients in addition to failed non-operative management of full thickness tears in older patients are the most likely to require surgery, which may be done open or arthroscopically. The majority of tears are amenable to the less invasive arthroscopic method, which yields good success rates and high patient satisfaction.

  4. Comparing surgical repair with conservative treatment for degenerative rotator cuff tears : a randomized controlled trial

    NARCIS (Netherlands)

    Lambers Heerspink, Okke; van Raay, Jos J. A. M.; Koorevaar, Rinco C. T.; van Eerden, Pepijn J. M.; Westerbeek, Robin E.; van 't Riet, Esther; van den Akker-Scheek, Inge; Diercks, Ronald L.

    Background: Good clinical results have been reported for both surgical and conservative treatment of rotator cuff tears. The primary aim of this randomized controlled trial was to compare functional and radiologic improvement after surgical and conservative treatment of degenerative rotator cuff

  5. Case Report of Acute Traumatic Rotator Cuff Tear Treatment in Traditional Korean Medicine

    Directory of Open Access Journals (Sweden)

    Jeong-Hwan Lee

    2011-12-01

    Full Text Available Objectives: There is no report on treatment of acute traumatic rotator cuff tear in Traditional Korean Medicine. We reported Traditional Korean Treatment for pain relief and better movement of acute traumatic rotator cuff tear. Methods: Shoulder MRI was used to confirm the diagnosis of tear of rotator cuff. The patient was treated with Traditional Korean Methods (Acupuncture, Herbal medicine, Pharmacopuncture for 6 months. We evaluated the patient through VAS (Visual Analogue Scale, UCLA shoulder scale, ROM (Range of motion and Shoulder MRI. Results: After 6 months of treatment, the patient's VAS was decreased whereas UCLA score and Shoulder ROM were increased. Rotator cuff tear was repaired on Shoulder MRI images. Conclusions: In acute traumatic rotator cuff tear, Korean Traditional Treatment is good method for pain relief and better movement.

  6. Result from arthroscopic surgical treatment of renewed tearing of the rotator cuff of the shoulder

    Directory of Open Access Journals (Sweden)

    Glaydson Gomes Godinho

    2015-02-01

    Full Text Available OBJECTIVES: To evaluate function among patients with postoperative recurrence of rotator cuff injuries that was treated arthroscopically (case series and compare this with function in patients without recurrence (control group; and to compare function among patients with recurrence of rotator cuff injuries that were greater than and smaller than 3 cm.METHODS: This was a retrospective evaluation of patients who underwent arthroscopic revision of rotator cuff injuries using the ASES, Constant & Murley and UCLA scores and a visual analog pain scale, in comparison with patients in a control group who underwent primary rotator cuff repair.RESULTS: The size of the rotator cuff injury recurrence had a statistically significant influence on the result from the arthroscopic surgical treatment. The functional scores showed worse results than those from the first procedure.CONCLUSION: Arthroscopic surgical treatment of renewed tearing of rotator cuff injuries showed worse functional scores than those from primary repair of the injury.

  7. Open versus arthroscopic treatment of chronic rotator cuff impingement

    NARCIS (Netherlands)

    Schröder, J.; van Dijk, C. N.; Wielinga, A.; Kerkhoffs, G. M.; Marti, R. K.

    2001-01-01

    We report the results of 238 consecutive patients who underwent in total 261 acromioplasties because of chronic rotator cuff impingement. The procedure was performed either in conventional open technique (80) or arthroscopically (181). Two years (1-10) after the operation 68% of the patients treated

  8. Rotator cuff preservation in arthroscopic treatment of calcific tendinitis.

    Science.gov (United States)

    Maier, Dirk; Jaeger, Martin; Izadpanah, Kaywan; Bornebusch, Lutz; Suedkamp, Norbert Paul; Ogon, Peter

    2013-05-01

    We sought to evaluate (1) clinical and radiologic results after arthroscopic calcific deposit (CD) removal and (2) the relevance of remnant calcifications (RCs). The study included 102 patients undergoing arthroscopic CD removal, preserving integrity of the rotator cuff. Postoperatively, we divided patients into 2 groups according to the extent of CD removal achieved. Group 1 consisted of patients with complete CD removal. Group 2 included patients showing minor RCs. Ninety-three patients (99 shoulders) completed follow-up. The mean patient age was 50.6 years (31 to 68 years), and the mean follow-up period was 37.3 months (24 to 83 months). We obtained anteroposterior (AP) and outlet radiographs before surgery, postoperatively, and at follow-up. We used the absolute and age- and sex-related Constant scores (CSabs, CSrel) as outcome measures. We compared both groups statistically (Mann-Whitney U test; P rotator cuff yielded good to excellent results in 90% of patients and avoided iatrogenic tendon defects in all patients. Minor RCs did not impair clinical outcome and spontaneously resolved at follow-up. Level IV, therapeutic case series. Copyright © 2013 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  9. Verification of a table of phantom scatter factors for radiotherapy treatment planning

    International Nuclear Information System (INIS)

    Arts, J.K.; Bailey, M.J.; Hill, R.

    2004-01-01

    Full text: Many commercially available treatment planning systems require the medical physicist to measure and enter significant quantities of data for the verification of physics based algorithms. The CMS XiO (St. Louis, USA) treatment planning system requires a table of phantom scatter factors amongst other data. In a previous paper by Storchi et al, a table of phantom scatter factors is described. This table gives the phantom scatter factor as a function of field size and quality index determined from a collection of measured data for the total scatter factor and the collimator scatter factor from 25 different beam qualities ranging from 4MV up to 25MV. These factors have been determined at a fixed reference depth of 10cm for square fields of various sizes. This work investigates the claim that this table can be used as an alternative to calculated phantom scatter curve from measured data of a particular treatment unit. According to definition, it is difficult to directly measure the phantom scatter correction factor (Sp). This problem can be solved using the relation; S cp (A) = S c (A)S p (A) where S cp (A)) is the measured total scatter factor for a field size of square side dimension, A and S c (A) is the measured collimator scatter factor for a field size of square side dimension, A (Khan et al 1980, van Gasteren et al 1991). The total scatter correction factor (Sc,p) was measured in a full phantom, and the collimator scatter factor (Sc) measured using an ESTRO mini-phantom. These factors were measured on three Siemens linear accelerators (Concord, USA) with energies 6MV and 18MV and square field sizes ranging from 4x4cm to 40x40cm. The Primus and KD Mevatron produced 6 and 18MV X-rays and the MXE Mevatron produced 6Mv X-rays only. The values for Sp were calculated by rearranging equation (1). Phantom scatter factors were calculated from the data provided by Storchi et al using the quality index of each beam. For comparison, a set of Sp values was

  10. Thromboelastography (TEG) or rotational thromboelastometry (ROTEM) to monitor haemostatic treatment in bleeding patients

    DEFF Research Database (Denmark)

    Wikkelsø, A.; Wetterslev, J.; Møller, A. M.

    2017-01-01

    of publication status, publication date, blinding status, outcomes published or language from date of inception to 5 January 2016 in six bibliographic databases. We included 17 trials (1493 participants), most involving cardiac surgery. Thromboelastography or rotational thromboelastometry seemed to reduce...... strategies guided by thromboelastography or rotational thromboelastometry may reduce the need for blood products in patients with bleeding, but the results are mainly based on trials of elective cardiac surgery involving cardiopulmonary bypass, with low-quality evidence.......Coagulopathy and severe bleeding are associated with high mortality. We evaluated haemostatic treatment guided by the functional viscoelastic haemostatic assays, thromboelastography or rotational thromboelastometry in bleeding patients. We searched for randomised, controlled trials irrespective...

  11. Surgery or conservative treatment for rotator cuff tear: a meta-analysis.

    Science.gov (United States)

    Ryösä, Anssi; Laimi, Katri; Äärimaa, Ville; Lehtimäki, Kaisa; Kukkonen, Juha; Saltychev, Mikhail

    2017-07-01

    Comparative evidence on treating rotator cuff tear is inconclusive. The objective of this review was to evaluate the evidence on effectiveness of tendon repair in reducing pain and improving function of the shoulder when compared with conservative treatment of symptomatic rotator cuff tear. Search on CENTRAL, MEDLINE, EMBASE, CINAHL, Web of Science and Pedro databases. Randomised controlled trials (RCT) comparing surgery and conservative treatment of rotator cuff tear. Study selection and extraction based on the Cochrane Handbook for Systematic reviews of Interventions. Random effects meta-analysis. Three identified RCTs involved 252 participants (123 cases and 129 controls). The risk of bias was considered low for all three RCTs. For Constant score, statistically insignificant effect size was 5.6 (95% CI -0.41 to 11.62) points in 1-year follow up favouring surgery and below the level of minimal clinically important difference. The respective difference in pain reduction was -0.93 (95% CI -1.65 to -0.21) cm on a 0-10 pain visual analogue scale favouring surgery. The difference was statistically significant (p = 0.012) in 1-year follow up but below the level of minimal clinically important difference. There is limited evidence that surgery is not more effective in treating rotator cuff tear than conservative treatment alone. Thus, a conservative approach is advocated as the initial treatment modality. Implications for Rehabilitation There is limited evidence that surgery is not more effective in treating rotator cuff tear than conservative treatment alone. There was no clinically significant difference between surgery and active physiotherapy in 1-year follow-up in improving Constant score or reducing pain caused by rotator cuff tear. As physiotherapy is less proneness to complications and less expensive than surgery, a conservative approach is advocated as the initial treatment modality to rotator cuff tears.

  12. Epidemiology, natural history, and indications for treatment of rotator cuff tears.

    Science.gov (United States)

    Tashjian, Robert Z

    2012-10-01

    The etiology of rotator cuff disease is likely multifactorial, including age-related degeneration and microtrauma and macrotrauma. The incidence of rotator cuff tears increases with aging with more than half of individuals in their 80s having a rotator cuff tear. Smoking, hypercholesterolemia, and genetics have all been shown to influence the development of rotator cuff tearing. Substantial full-thickness rotator cuff tears, in general, progress and enlarge with time. Pain, or worsening pain, usually signals tear progression in both asymptomatic and symptomatic tears and should warrant further investigation if the tear is treated conservatively. Larger (>1-1.5 cm) symptomatic full-thickness cuff tears have a high rate of tear progression and, therefore, should be considered for earlier surgical repair in younger patients if the tear is reparable and there is limited muscle degeneration to avoid irreversible changes to the cuff, including tear enlargement and degenerative muscle changes. Smaller symptomatic full-thickness tears have been shown to have a slower rate of progression, similar to partial-thickness tears, and can be considered for initial nonoperative treatment due to the limited risk for rapid tear progression. In both small full-thickness tears and partial-thickness tears, increasing pain should alert physicians to obtain further imaging as it can signal tear progression. Natural history data, along with information on factors affecting healing after rotator cuff repair, can help guide surgeons in making appropriate decisions regarding the treatment of rotator cuff tears. The management of rotator cuff tears should be considered in the context of the risks and benefits of operative versus nonoperative treatment. Tear size and acuity, the presence of irreparable changes to the rotator cuff or glenohumeral joint, and patient age should all be considered in making this decision. Initial nonoperative care can be safely undertaken in older patients (>70

  13. Calcific tendinitis of the rotator cuff: state of the art in diagnosis and treatment.

    Science.gov (United States)

    Merolla, Giovanni; Singh, Sanjay; Paladini, Paolo; Porcellini, Giuseppe

    2016-03-01

    Calcific tendinitis is a painful shoulder disorder characterised by either single or multiple deposits in the rotator cuff tendon. Although the disease subsides spontaneously in most cases, a subpopulation of patients continue to complain of pain and shoulder dysfunction and the deposits do not show any signs of resolution. Although several treatment options have been proposed, clinical results are controversial and often the indication for a given therapy remains a matter of clinician choice. Herein, we report on the current state of the art in the pathogenesis, diagnosis and treatment of calcific tendinitis of the rotator cuff.

  14. Surgical versus Non-surgical Management of Rotator Cuff Tears: Predictors of Treatment Allocation

    OpenAIRE

    Kweon, Christopher Y.; Gagnier, Joel Joseph; Robbins, Christopher; Bedi, Asheesh; Carpenter, James E.; Miller, Bruce S.

    2014-01-01

    Objectives: Rotator cuff tears are a common shoulder disorder resulting in significant disability to patients and strain on the health care system. While both surgical and non-surgical management are accepted treatment options, little data exist to guide the surgeon in treatment allocation. Defining variables to guide treatment allocation may be important for patient education and counseling, as well as to deliver the most efficient care plan at the time of presentation. The objective of this...

  15. Treatment of Tehran refinery wastewater using rotating biological contactor

    Energy Technology Data Exchange (ETDEWEB)

    Ghazi, Masoud; Mirsajadi, Hassan; Ganjidoust, Hossien [Tarbeyat Modarres Univ., Teheran (Iran, Islamic Republic of). Environmental Engineering Dept.

    1993-12-31

    Tehran Refinery is a large plant which produces several petroleum products. The wastewaters are generated from several different refinery processes and units. Because of the wastewaters uniqueness they need to be treated in each specific plant. Currently, an activated sludge system is the main biological wastewater treatment process in Tehran refinery plant. A study was initiated in order to find a more suitable and reliable process which can produce a better treated effluent which might, in case the process be successful, be reused for irrigation lands. 5 refs., 5 figs.

  16. Treatment of Tehran refinery wastewater using rotating biological contactor

    Energy Technology Data Exchange (ETDEWEB)

    Ghazi, Masoud; Mirsajadi, Hassan; Ganjidoust, Hossien [Tarbeyat Modarres Univ., Teheran (Iran, Islamic Republic of). Environmental Engineering Dept.

    1994-12-31

    Tehran Refinery is a large plant which produces several petroleum products. The wastewaters are generated from several different refinery processes and units. Because of the wastewaters uniqueness they need to be treated in each specific plant. Currently, an activated sludge system is the main biological wastewater treatment process in Tehran refinery plant. A study was initiated in order to find a more suitable and reliable process which can produce a better treated effluent which might, in case the process be successful, be reused for irrigation lands. 5 refs., 5 figs.

  17. The anaerobic and anoxic treatment of wastewater in a rotating disc reactor

    International Nuclear Information System (INIS)

    Breithaupt, T.; Thelitz, A.; Zhang Yicheng; Wiesmann, U.

    1994-01-01

    A new rotation disc reactor for anaerobic and anoxic treatment of wastewater is presented. The discs are covered with a structured textile material for immobilization of bacteria. In contrast to the wellknown rotating disc contactor the discs are completely flooded. A slow rotation causes a flow into the gaps which are formed by the parallel discs and increases the mass transfer rate. For a mean residence time of 45 min and a revolution of 38 min -1 the distribution of residence times corresponds with that of a cascade with four or five steps. This has a favourable effect on mean reaction rate if the reaction is limitted by substrate concentration. For the anaerobic treatment of a wastewater produced by the dewatering of sewage sludge (10 000 mg/l COD) and for the denitrification of a synthetic wastewater (1000 mg/l NO 3 -N) high removal rates could be obtained resulting from a high concentration of immobilized bacteria. (orig.) [de

  18. The first HF table, after heat treatment and ready to be machined in HEPCO, Arak (IRAN)

    CERN Multimedia

    Tiziano Camporesi

    2003-01-01

    The first HF support table 'load' tested by the team of people who have contributed to it from design to welding. This table will support the 240 tons of 1 HF detector and will integrate the raisers which will push it up to the beam line level. It is the first Iranian contribution to an HEP experiment.

  19. Outcome of surgical treatment and the prognostic factors in full-thickness rotator cuff tear

    Directory of Open Access Journals (Sweden)

    M.R. Giti

    2006-07-01

    Full Text Available Background: Rotator cuff tendon tear injury is one of the most frequently seen orthopaedic conditions, and surgical repair of rotator cuff tears is a common procedure. The purpose of the present study was to determine the results of full-thickness rotator cuff repair and to look for predictors of outcomes. Methods: we studied 27 patients (17 men and 10 women with a mean age of 57.7 years who underwent open rotator cuff repair surgery for full-thickness tear between 2001 and 2005 at the Imam Khomeini Hospital and were subsequently followed-up for 6 and 12 months after surgery. The shoulder function was assessed by Constant classification and factors potentially associated with outcomes were Results: The mean of preoperative Constant score (CS was 45.8 ± 14.1 after 12 months, 6 patients (22.2% had good results and 21 patients (77.8% had excellent result according to CS. Pain relief was generally satisfactory. Using multiple regression analysis, treatment was significantly correlated preoperative CS and acromio-humeral interval (AHI however, no correlation was found between the result of the treatment and pretreatment atrophy, tear size, acromial morphology, preoperative symptom duration and age. Conclusion: In this study, a standard rotator cuff repair technique reduced pain severity and was associated with good results, however larger studies are necessary to define the long-term outcome of this procedure.

  20. Treatment of Partial Rotator Cuff Tear with Ultrasound-guided Platelet-rich Plasma

    Directory of Open Access Journals (Sweden)

    Vetrivel Chezian Sengodan

    2017-01-01

    Full Text Available Background: The treatment of symptomatic partial rotator cuff tear has presented substantial challenge to orthopaedic surgeons as it can vary from conservative to surgical repair. Researches have established the influence of platelet rich plasma in healing damaged tissue. Currently very few data are available regarding the evidence of clinical and radiological outcome of partial rotator cuff tear treated with ultrasound guided platelet rich plasma injection in English literature. Materials and Methods: 20 patients with symptomatic partial rotator cuff tears were treated with ultrasound guided platelet rich plasma injection. Before and after the injection of platelet rich plasma scoring was done with visual analogue score, Constant shoulder score, and UCLA shoulder score at 8 weeks and third month. A review ultrasound was performed 8 weeks after platelet rich plasma injection to assess the rotator cuff status. Results: Our study showed statistically significant improvements in 17 patients in VAS pain score, constant shoulder score and UCLA shoulder score. No significant changes in ROM were noted when matched to the contra-lateral side (P < 0.001 at the 3 month follow-up. The study also showed good healing on radiological evaluation with ultrasonogram 8 weeks after platelet rich plasma injection. Conclusion: Ultrasound guided platelet rich plasma injection for partial rotator cuff tears is an effective procedure that leads to significant decrease in pain, improvement in shoulder functions, much cost-effective and less problematic compared to a surgical treatment.

  1. Continuous table acquisition MRI for radiotherapy treatment planning: Distortion assessment with a new extended 3D volumetric phantom

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Amy, E-mail: aw554@uowmail.edu.au; Metcalfe, Peter [Centre for Medical Radiation Physics, University of Wollongong, Wollongong, NSW 2522, Australia and Liverpool and Macarthur Cancer Therapy Centres and Ingham Institute for Applied Medical Research, Liverpool, NSW 2170 (Australia); Liney, Gary [Centre for Medical Radiation Physics, University of Wollongong, Wollongong, NSW 2522 (Australia); Liverpool and Macarthur Cancer Therapy Centres and Ingham Institute for Applied Medical Research, Liverpool, NSW 2170 (Australia); South West Clinical School, University of New South Wales, Sydney, NSW 2170 (Australia); Holloway, Lois [Centre for Medical Radiation Physics, University of Wollongong, Wollongong, NSW 2522 (Australia); Liverpool and Macarthur Cancer Therapy Centres and Ingham Institute for Applied Medical Research, Liverpool, NSW 2170 (Australia); South West Clinical School, University of New South Wales, Sydney, NSW 2170 (Australia); Institute of Medical Physics, School of Physics, University of Sydney, Sydney, NSW 2006 (Australia); Dowling, Jason; Rivest-Henault, David [Commonwealth Scientific and Industrial Research Organisation, Australian E-Health Research Centre, Herston, QLD 4029 (Australia)

    2015-04-15

    Purpose: Accurate geometry is required for radiotherapy treatment planning (RTP). When considering the use of magnetic resonance imaging (MRI) for RTP, geometric distortions observed in the acquired images should be considered. While scanner technology and vendor supplied correction algorithms provide some correction, large distortions are still present in images, even when considering considerably smaller scan lengths than those typically acquired with CT in conventional RTP. This study investigates MRI acquisition with a moving table compared with static scans for potential geometric benefits for RTP. Methods: A full field of view (FOV) phantom (diameter 500 mm; length 513 mm) was developed for measuring geometric distortions in MR images over volumes pertinent to RTP. The phantom consisted of layers of refined plastic within which vitamin E capsules were inserted. The phantom was scanned on CT to provide the geometric gold standard and on MRI, with differences in capsule location determining the distortion. MRI images were acquired with two techniques. For the first method, standard static table acquisitions were considered. Both 2D and 3D acquisition techniques were investigated. With the second technique, images were acquired with a moving table. The same sequence was acquired with a static table and then with table speeds of 1.1 mm/s and 2 mm/s. All of the MR images acquired were registered to the CT dataset using a deformable B-spline registration with the resulting deformation fields providing the distortion information for each acquisition. Results: MR images acquired with the moving table enabled imaging of the whole phantom length while images acquired with a static table were only able to image 50%–70% of the phantom length of 513 mm. Maximum distortion values were reduced across a larger volume when imaging with a moving table. Increased table speed resulted in a larger contribution of distortion from gradient nonlinearities in the through

  2. Initial treatment of complete rotator cuff tear and transition to surgical treatment: systematic review of the evidence

    Science.gov (United States)

    Abdul-Wahab, Taiceer A.; Betancourt, Jean P.; Hassan, Fadi; Thani, Saeed Al.; Choueiri, Hened; Jain, Nitin B.; Malanga, Gerard A.; Murrell, William D.; Prasad, Anil; Verborgt, Olivier

    2016-01-01

    Summary Background rotator cuff tear affects many people. Natural history, and evidence for non-operative treatment remains limited. Our objective is to assess evidence available for the efficacy and morbidity of commonly used systemic medications, physiotherapy, and injections alongside evaluating any negative long-term effects. Methods a systematic search was performed of PubMed, Cochrane, EMBASE and CINAHL dates (1 January 1960 – 1 December 2014), search terms: ‘rotator cuff tear’, ‘natural history’, ‘atraumatic’, ‘injection’, ‘physiotherapy’ or ‘physical therapy’, ‘injection’, ‘corticosteroid’, ‘PRP‘, ‘MSC’, risk of conservative treatment’, and ‘surgical indication’. Results eleven studies were included. The mean Coleman Methodology Score modified for conservative therapy is 69.21 (range 88–44) (SD 12.31). This included 2 RCTs, 7 prospective, and 2 retrospective studies. Evidence suggests it is safe to monitor symptomatic rotator cuff tears, as tear size and symptoms are not correlated with pain, function, and/or ultimate outcome. Conclusions complete rotator cuff tears may be effectively treated with injections, exercise in the short and intermediate terms respectively. Negative effect of corticosteroids on rotator cuff tissue has not been demonstrated. Timing to end conservative treatment is unknown, but likely indicated when a patient demonstrates increased weakness and loss of function not recoverable by physiotherapy. PMID:27331030

  3. Surgical Versus Nonsurgical Management of Rotator Cuff Tears: Predictors of Treatment Allocation.

    Science.gov (United States)

    Kweon, Christopher; Gagnier, Joel J; Robbins, Christopher B; Bedi, Asheesh; Carpenter, James E; Miller, Bruce S

    2015-10-01

    Rotator cuff tears are a common shoulder disorder resulting in significant disability to patients and financial burden on the health care system. While both surgical and nonsurgical management are accepted treatment options, there is a paucity of data to support a treatment algorithm for care providers. Defining variables to guide treatment allocation may be important for patient education and counseling, as well as to deliver the most efficient care plan at the time of presentation. To identify independent variables at the time of initial clinical presentation that are associated with preferred allocation to surgical versus nonsurgical management for patients with known full-thickness rotator cuff tears. Case control study; Level of evidence, 3. A total of 196 consecutive adult patients with known full-thickness rotator cuff tears were enrolled into a prospective cohort study. Robust data were collected for each subject at baseline, including age, sex, body mass index (BMI), shoulder activity score, smoking status, size of cuff tear, duration of symptoms, functional comorbidity index, the American Shoulder and Elbow Surgeons (ASES) score, the Western Ontario Rotator Cuff index (WORC), and the Veterans Rand 12-Item Health Survey (VR-12). Logistic regression was performed to identify variables associated with treatment allocation, and the corresponding odds ratios were calculated. Of the 196 patients enrolled, 112 underwent surgical intervention and 84 nonoperative management. With covariates controlled for, significant baseline patient characteristics predictive of eventual allocation to surgical treatment included younger age, lower BMI, and durations of symptoms less than 1 year. Increasing age, higher BMI, and duration of symptoms longer than 1 year were predictive of nonsurgical treatment. Factors that were not associated with treatment allocation included sex, tear size, functional comorbidity score, or any of the patient-derived outcome scores at presentation

  4. Some geometrical problems related to the rotation camera. Pt. 1

    International Nuclear Information System (INIS)

    Taupin, D.

    1985-01-01

    An algorithm for a safe generation of the table of expected reflections in the Arndt-Wonnacott rotation camera is given. It relies upon classic quadratic matrixalgebra. Some mathematical theorems are recalled. This algorithm is part of a series of programs developed at Orsay for the treatment of rotation-camera photographs. (orig.)

  5. Machine-specific quality assurance procedure for stereotactic treatments with dynamic couch rotations.

    Science.gov (United States)

    Wilson, Byron; Gete, Ermias

    2017-12-01

    We present a method in which the treatment couch's accuracy is measured using the electronic portal imaging device (EPID) and a phantom of our own construction. Using this phantom, we were able to quantify the treatment couch walkout, and the rotation angle accuracy for both static and dynamic couch treatments. These measurements were used to provide an accurate measure of the treatment couch isocenter as well as to verify the couch rotation angle recorded in the trajectory log. The phantom was constructed using a polystyrene slab in which five ball bearings of 4 mm diameter are placed on the same plane at varying radii (0, 2.8, 4.4, 5.6, and 6.7 cm). The couch was rotated through its full extent (-90, 90 degrees) while MV images were acquired continuously. The couch rotational accuracy was calculated using a least squares minimization which fit the locations of the BBs to their expected locations relative to reference setup conditions. Using this approach, rotation angle and isocenter walkout was calculated in three dimensions. These measurements were used to quantify the accuracy of the couch as well as to validate the Varian TrueBeam trajectory logs. Additionally, a method for an EPID-based couch star-shot measurement was developed and compared with the traditional film-based method. The measured couch center of rotation consisted of a cloud of points clustered around the room isocenter within 0.7 mm distance. The trajectory log couch angle values agreed with those recorded in the DICOM header of the EPID images to the third significant digit and the couch rotation angles recorded in the trajectory log and DICOM header agreed with the calculated values to 0.08 degrees. Comparison of couch star-shot measurement developed in this study with film-based star-shot measurements gave an agreement to within 0.2 mm. We have developed a quality assurance method for the treatment couch which is simple, accurate, and enables the user to access a multitude of consistent data

  6. Structural Safety Analysis of Openable Working Table in ACP Hot Cell for Spent Fuel Treatment

    International Nuclear Information System (INIS)

    Kwon, Ki Chan; Ku, Jeong Hoe; Lee, Eun Pyo; Choung, Won Myung; You, Gil Sung; Lee, Won Kyung; Cho, IL Je; Kuk, Dong Hak

    2006-01-01

    A demonstration facility for advanced spent fuel conditioning process (ACP) is under construction in KAERI. In this hot cell facility, all process equipment and materials are taken in and out only through the rear door. The working table in front of the process rear door is specially designed to be openable for the efficient use of the space. This paper presents the structural safety analysis of the openable working table, for the normal operational load condition and accidental drop condition of heavy object. Both cases are investigated through static and dynamic finite element analyses. The analysis results show that structural safety of the working table is sufficiently assured and the working table is not collapsed even when an object of 500 kg is dropped from the height of 50 cm.

  7. SU-E-P-45: An Analytical Formula for Deriving Mechanical Iso-Center of Rotational Gantry Treatment Unit Rotational Gantry Treatment Unit

    International Nuclear Information System (INIS)

    Ding, X; Bues, M

    2015-01-01

    Purpose: To present an analytical formula for deriving mechanical isocenter (MIC) of a rotational gantry treatment unit. The input data to the formula is obtained by a custom-made device. The formula has been implemented and used in an operational proton therapy facility since 2005. Methods: The custom made device consisted of 3 mutually perpendicular dial indicators and 5 clinometers, to obtain displacement data and gantry angle data simultaneously. During measurement, a steel sphere was affixed to the patient couch, and the device was attached to the snout rotating with the gantry. The displacement data and angle data were obtained simultaneously at angular increments of less than 1 degree. The analytical formula took the displacement and angle as input and derived the positions of dial indicator tips (DIT) position in room-fixed coordinate system. The formula derivation presupposes trigonometry and 3-dimentional coordinate transformations. Due to the symmetry properties of the defining equations, the DIT position can be solved for analytically without using mathematical approximations. We define the mean of all points in the DIT trajectory as the MIC. The formula was implemented in computer code, which has been employed during acceptance test, commissioning, as well as routine QA practice in an operational proton facility since 2005. Results: It took one minute for the custom-made device to acquire the measurement data for a full gantry rotation. The DIT trajectory and MIS are instantaneously available after the measurement. The MIC Result agrees well with vendor’s Result, which came from a different measurement setup, as well as different data analysis algorithm. Conclusion: An analytical formula for deriving mechanical isocenter was developed and validated. The formula is considered to be absolutely accurate mathematically. Be analyzing measured data of radial displacements as function of gantry angle, the formula calculates the MI position in room

  8. New technologies to enhance quality and safety of table eggs: ultra-violet treatment and modified atmosphere packaging

    Directory of Open Access Journals (Sweden)

    Frédérique Pasquali

    2014-12-01

    Full Text Available In the present study the effect of ultra-violet (UV treatment alone and in combination with 100% CO2 modified atmosphere packaging (MAP was evaluated both on the survival of naturally occurring bacteria, as well as on quality parameters of table eggs during 28 days of storage at 21°C. Table eggs were collected from the conveyor belt after the UV module, and placed on carton trays. A representative number of carton trays were packed in a high barrier multilayer pouch filled with 100% CO2. All eggs were stored at 21°C and analysed at 0, 1, 7, 14, 21 and 28 days of storage. Eggs not treated with UV and not packed were also included. On the eggshells total colony count, total coliforms and faecal coliforms counts, as well as the detection of Salmonella spp. were investigated. Moreover, chemical-functional parameters such as weight loss, albumen pH and Haugh Unit (HU were evaluated. The total colony count on UV treated table eggs was approximately 1 log10 CFU/g lower than untreated eggs (2.27 vs 3.29 log10 CFU/g. During storage, CO2 packed eggs maintained the initial values of HU, whereas the albumen pH decreased up to 1.5-2 points in comparison to unpacked eggs. The UV treatment was effective in reducing the total colony count on the surface of table eggs. MAP showed a great potential in maintaining/enhance the technological properties of egg constituents (higher foam stability of the albumen for meringue preparation without significantly impacting on the microbial load of table eggs.

  9. Arthroscopic treatment of secondary rotator cuff damage after shoulder hemiarthroplasty (case report

    Directory of Open Access Journals (Sweden)

    S. Y. Dokolin

    2015-01-01

    Full Text Available Anatomical shoulder arthroplasty is an effective treatment for patients with primary deforming arthritis, rheumatoid arthritis and aseptic necrosis of the humeral head. However this kind of surgery is associated with high risk of complications, and within five-year follow-up the incidence of complications increases. The authors described a clinical case illustrating one of these complications - secondary rotator cuff damage after shoulder hemiarthroplasty. The tear was verified using radiological methods and arthroscopy. They performed arthroscopic rotator cuff repair using suture anchors in order to alleviate pain and preserve shoulder functions. If there are no signs of endoprosthetic instability and coracoacromial ligament is preserved, arthroscopic treatment of such damages extends the time of limb function preserving the endoprosthesis. Patients should not raise their arms above the horizontal level.

  10. Calcific tendinitis of the rotator cuff: state of the art in diagnosis and treatment

    OpenAIRE

    Merolla, Giovanni; Singh, Sanjay; Paladini, Paolo; Porcellini, Giuseppe

    2015-01-01

    Calcific tendinitis is a painful shoulder disorder characterised by either single or multiple deposits in the rotator cuff tendon. Although the disease subsides spontaneously in most cases, a subpopulation of patients continue to complain of pain and shoulder dysfunction and the deposits do not show any signs of resolution. Although several treatment options have been proposed, clinical results are controversial and often the indication for a given therapy remains a matter of clinician choice...

  11. Fatty-acid alkyl esters in table olives in relation to abnormal fermentation and poorly conducted technological treatments

    Energy Technology Data Exchange (ETDEWEB)

    Lanza, B.; Serio, M.G. di; Giacinto, L. di

    2016-07-01

    There are several methods to prepare table olives, and each of the steps and conditions during this processing can affect the composition and nutritional value of the product. The influence of abnormal fermentation and poorly conducted technological treatments was examined here in terms of the lipid fraction of table olives. In ‘Greek style’ olives, a low concentration of brine can allow the growth of spontaneous microflora and consequent organoleptic defects (‘putrid/butyric fermentation’, ‘winey-vinegary’). Here, the ‘Kalamata’ and ‘Moresca’ cultivars can produce methyl esters (methyl oleate/ linoleate: 553 and 450 mg·kg−1 oil, respectively) and ethyl esters (ethyl oleate/ inoleate: 4764 and 4195; palmitate: 617 and 886 mg·kg −1 oil, respectively). In ‘Sevillan style’ olives, a high NaOH concentration influences the fatty-acid composition less, but is difficult to eliminate, for a ‘soapy’ defect. The ‘Giarraffa’ and ‘Nocellara del Belice’ cultivars produce only ethyl esters (ethyl oleate/ linoleate: 222 and 289 mg·kg−1 oil, respectively). With this production of ethyl and methyl esters from the principal fatty acids in the lipid fractions of table olives, methods that provide only biological treatments (i.e., Greek style) pose more risk than methods that provide only chemical treatments (i.e., Sevillan style). (Author)

  12. Effectiveness of shock wave therapy as an alternative to the rotator cuff injury treatment

    Directory of Open Access Journals (Sweden)

    Roberto Joaquín Del Gordo-D´Amato

    2016-02-01

    Full Text Available Rotator cuff injuries are reason for consultation frequent in elderly patients. Most of the time there are no background traumatic acute generating progressive limitations in activities of daily living (ADLS. The objective of this study is to show results in tendonitis of the rotator cuff, in patients treated with extracorporeal shock wave therapy (ESWT. It is a prospective descriptive observational study which presents clinical and functional outcomes in patients with described lesion, treated with ESWT with poor response to conventional treatments and clinical pictures of longstanding through implementing visual analog scale (VAS of pain and evaluation of range of motion. The greater presence of lesion is present in women 63.6%. Mostly affected shoulder was right in a 63.6%. Found significant changes in VAS pre and post treatment with averages of 7.9 and 0.5 respectively and different statistical p < 0.001. We were conclude that the ESWT is an effective method in the treatment of the tendonitis of the rotator cuff with relief from pain and return to functional levels.

  13. Electrocoagulation using a rotated anode: A novel reactor design for textile wastewater treatment.

    Science.gov (United States)

    Naje, Ahmed Samir; Chelliapan, Shreeshivadasan; Zakaria, Zuriati; Abbas, Saad A

    2016-07-01

    This paper investigates the optimum operational conditions of a novel rotated bed electrocoagulation (EC) reactor for the treatment of textile wastewater. The effect of various operational parameters such as rotational speed, current density (CD), operational time (RT), pH, temperature, and inter-electrode distance (IED) on the pollutant removal efficiency were examined. In addition, the consumption of aluminum (Al) and electrical energy, as well as operating costs at optimum conditions were also calculated. The results indicated that the optimum conditions for the treatment of textile wastewater were achieved at CD = 4 mA/cm(2), RT = 10 min, rotational speed = 150 rpm, pH = 4.57, temperature = 25 °C, and IED = 1 cm. The electrode consumption, energy consumption, and operating costs were 0.038 kg/m(3), 4.66 kWh/m(3) and 0.44 US$/m(3), respectively. The removal efficiencies of chemical oxygen demand (COD), biological oxygen demand (BOD), total suspended solid (TSS), turbidity and color were 97.10%, 95.55%, 98%, 96% and 98.50%, respectively, at the first 10 min of reaction time, while the phenol compound of the wastewater was almost entirely removed (99.99%). The experimental results confirm that the new reactor design with rotated anode impellers and cathode rings provided high treatment efficiency at a reduced reaction time and with lower energy consumption. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Stromal vascular stem cell treatment decreases muscle fibrosis following chronic rotator cuff tear.

    Science.gov (United States)

    Gumucio, Jonathan P; Flood, Michael D; Roche, Stuart M; Sugg, Kristoffer B; Momoh, Adeyiza O; Kosnik, Paul E; Bedi, Asheesh; Mendias, Christopher L

    2016-04-01

    Rotator cuff injuries are associated with atrophy and fat infiltration into the muscle, commonly referred to as "fatty degeneration." As the poor function of chronically torn muscles may limit recovery after surgical repair, there is considerable interest in finding therapies to enhance muscle regeneration. Stromal vascular fraction stem cells (SVFCs) can improve muscle regeneration in other chronic injury states, and our objective was to evaluate the ability of SVFCs to reduce fibrosis and fat accumulation, and enhance muscle fibre specific force production after chronic rotator cuff tear. Chronic supraspinatus tears were induced in adult immunodeficient rats, and repaired one month following tear. Rats received vehicle control, or injections of 3 × 10(5) or 3 × 10(6) human SVFCs into supraspinatus muscles. Two weeks following repair, we detected donor human DNA and protein in SVFC treated muscles. There was a 40 % reduction in fibrosis in the treated groups compared to controls (p = 0.03 for 3 × 10(5), p = 0.04 for 3 × 10(6)), and no differences between groups for lipid content or force production were observed. As there has been much interest in the use of stem cell-based therapies in musculoskeletal regenerative medicine, the reduction in fibrosis and trend towards an improvement in single fiber contractility suggest that SVFCs may be beneficial to enhance the treatment and recovery of patients with chronic rotator cuff tears.

  15. [Outcome of operative treatment for supination-external rotation Lauge-Hansen stage IV ankle fractures].

    Science.gov (United States)

    Kołodziej, Łukasz; Boczar, Tomasz; Bohatyrewicz, Andrzej; Zietek, Paweł

    2010-01-01

    Ankle fractures are among the most common musculoskeletal injures. These fractures occur with an overall age- and sex-adjusted incidence rate around 180 per 100 000 person-years. The most frequent mechanism is considered to be supination-external rotation (60 to 80% of all ankle fractures) consisting of pathologic external rotation of the foot initially placed in some degree of supination. According to Lauge-Hansen classification, ankle joint structures are damaged in a sequence where the final, stage IV injuries, represents transverse fracture of the medial malleolus or its equivalent-rupture of the deltoid ligament. The aim of this study is to compare the results of two subtypes of supination-external rotation stage IV fractures. 43 patients treated surgically in 2006 to 2007 at Authors institution because of stage IV supination-external rotation ankle fracture were submitted to retrospective analysis. There were 25 patients with bimalleolar fracture (type 1) and in 18 patients with lateral malleolar fracture with accompanying rupture of the deltoid ligament (type 2). The mean age was 46 years (from 20 to 82 years). Average follow up period was 37 months (from 24 to 46 months). For the evaluation of treatment AOFAS hind-foot score (American Orthopedic Foot and Ankle Society) was used. The mean AOFAS score scale for Type 1 fractures was 85 points and for type 2 was significantly higher and amounted to 91 points (p ankle fractures with medial malleolar fracture, requires the implementation of additional diagnostic and therapeutic strategies and procedures in order to improve the outcome of results.

  16. [Efficiency of a postoperative treatment after rotator cuff repair with a continuous passive motion device (CPM)].

    Science.gov (United States)

    Michael, J W-P; König, D P; Imhoff, A B; Martinek, V; Braun, S; Hübscher, M; Koch, C; Dreithaler, B; Bernholt, J; Preis, S; Loew, M; Rickert, M; Speck, M; Bös, L; Bidner, A; Eysel, P

    2005-01-01

    The main objective of this study was to prove that a postoperative combined continuous passive motion (CPM) and physiotherapy treatment protocol (CPM group) can achieve 90 degrees active abduction in the shoulder joint earlier than physiotherapy alone (PT group). The indication was a complete tear of the rotator cuff. The study was conducted under in-patient and out-patient conditions. 55 patients were included in this study. The prospective, randomized multicenter study design complies with DIN EN 540. The primary endpoint was the time span until 90 degrees active abduction was achieved by the patients. Patients in the CPM group reached the primary endpoint on average 12 days earlier than the control group. This difference was statistically significant (p = 0.0292). Analyzing the secondary endpoints, e. g., pain and disablement, the results in the CPM group showed again advantages of the combined treatment protocol (CPM + physiotherapy). The postoperative treatment of a total tear of the rotator cuff with a combined continuous passive motion and physiotherapy protocol provided a significantly earlier range of motion in the shoulder joint than physiotherapy alone. There was no report of CPM-related adverse effects.

  17. Septic bursitis after ultrasound-guided percutaneous treatment of rotator cuff calcific tendinopathy.

    Science.gov (United States)

    Sconfienza, Luca Maria; Randelli, Filippo; Sdao, Silvana; Sardanelli, Francesco; Randelli, Pietro

    2014-08-01

    Calcific tendinopathy of the rotator cuff is a common condition. Ultrasound-guided percutaneous aspiration is one of several options to treat this condition. The main advantages of this procedure are short duration, good outcome, and low cost. Furthermore, only minor complications have been reported in the literature, namely, vagal reactions during the procedure and mild postprocedural pain. We report the first case of septic bursitis after ultrasound-guided percutaneous treatment of calcific tendinopathy. Although this is generally considered a very safe procedure, a risk of infection should be taken into account. Copyright © 2014 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

  18. Advanced Wastewater Treatment Engineering—Investigating Membrane Fouling in both Rotational and Static Membrane Bioreactor Systems Using Empirical Modelling

    Directory of Open Access Journals (Sweden)

    Parneet Paul

    2016-01-01

    Full Text Available Advanced wastewater treatment using membranes are popular environmental system processes since they allow reuse and recycling. However, fouling is a key limiting factor and so proprietary systems such as Avanti’s RPU-185 Flexidisks membrane bioreactor (MBR use novel rotating membranes to assist in ameliorating it. In earlier research, this rotating process was studied by creating a simulation model based on first principles and traditional fouling mechanisms. In order to directly compare the potential benefits of this rotational system, this follow-up study was carried out using Avanti’s newly developed static (non-rotating Flexidisks MBR system. The results from operating the static pilot unit were simulated and modelled using the rotational fouling model developed earlier however with rotational switching functions turned off and rotational parameters set to a static mode. The study concluded that a rotating MBR system could increase flux throughput when compared against a similar static system. It is thought that although the slowly rotating spindle induces a weak crossflow shear, it is still able to even out cake build up across the membrane surface, thus reducing the likelihood of localised critical flux being exceeded at the micro level and lessening the potential of rapid trans-membrane pressure increases at the macro level.

  19. Yield Responses of Black Spruce to Forest Vegetation Management Treatments: Initial Responses and Rotational Projections

    Directory of Open Access Journals (Sweden)

    Peter F. Newton

    2012-01-01

    Full Text Available The objectives of this study were to (1 quantitatively summarize the early yield responses of black spruce (Picea mariana (Mill. B.S.P. to forest vegetation management (FVM treatments through a meta-analytical review of the scientific literature, and (2 given (1, estimate the rotational consequences of these responses through model simulation. Based on a fixed-effects meta-analytic approach using 44 treated-control yield pairs derived from 12 experiments situated throughout the Great Lakes—St. Lawrence and Canadian Boreal Forest Regions, the resultant mean effect size (response ratio and associated 95% confidence interval for basal diameter, total height, stem volume, and survival responses, were respectively: 54.7% (95% confidence limits (lower/upper: 34.8/77.6, 27.3% (15.7/40.0, 198.7% (70.3/423.5, and 2.9% (−5.5/11.8. The results also indicated that early and repeated treatments will yield the largest gains in terms of mean tree size and survival. Rotational simulations indicated that FVM treatments resulted in gains in stand-level operability (e.g., reductions of 9 and 5 yr for plantations established on poor-medium and good-excellent site qualities, resp.. The challenge of maintaining coniferous forest cover on recently disturbed sites, attaining statutory-defined free-to-grow status, and ensuring long-term productivity, suggest that FVM will continue to be an essential silvicultural treatment option when managing black spruce plantations.

  20. Development of Detachable IORT Table for Colorectal Cancer

    International Nuclear Information System (INIS)

    Kim, Myung Se; Lee, Joon Ha

    1994-01-01

    In spite of remarkable improvement of surgical skills and anesthesia, local failure still occurred in 36-45% of locally advanced colorectal cancer after curative resection with or without pre-or post-operative irradiation. Intraoperative radiation therapy (IORT) is the ideal modality which respectable lesions are removed surgically and the remaining cancer nests are sterilized by irradiation during a surgical procedure. Therefore, the excellent local control without the damage of the adjacent normal tissues can be achieved. In IORT, judicious set up of the treatment cone on the treatment surface of the patient is required for accurate and homogenous dose distribution within treatment field, especially on the slopping surface of sacrum and pelvic sidewall which are the common sites of the local recurrence in rectal cancer. For this purpose, adequate coordination of gantry rotation and table tilting are essential. Adjusting gantry rotation is not difficult but tilting of the table is impossible inconventional treatment couch. Department of Therapeutic Radiology in Yeungnam University Medical Center developed the IORT table for colorectal cancer which is easy to set up and detach on head-down is about 30 degree which is efficient and easy-to-use, not only for IORT but also for colorectal surgery. So far, authors performed IORT with newly developed treatment table in 2 patients with rectal cancer and we found that this newly developed table could contribute in improving the dose distribution of IORT and surgical procedure for colorectal cancer

  1. [Randomized controlled trials of needle knife therapy combined with rotation traction manipulation for the treatment of cervical spondylotic radiculopathy].

    Science.gov (United States)

    Zhou, Zhong-Liang; Su, Guo-Hong; Zheng, Bao-Zhu; Zuo, Yu-Zhu; Wei, Fu-Liang

    2016-09-25

    To compare the therapeutic effects between needle knife therapy combined with rotation traction manipulation and rotation traction manipulation for the treatment of cervical spondylotic radiculopathy. From November 2013 to June 2015, 80 patients with cervical spondylotic radiculopathy meeting the inclusion criteria were divided into two groups randomly:the control group in which 39 patients were treated with rotation traction manipulation, and the treatment group in which 41 patients were treated with needle knife combined with rotation traction manipulation. The patients in the control group were treated once dayly for 2 weeks, which was 1 course. The patients in the treatment group were treated with needle knife firstly once a week for 2 weeks, which was 1 course;then were treated with the same methods as the patients in the control group. The symptoms, signs score and the therapeutic effects of the two groups before and after treatment were observed. After treatment, symptoms and signs scores declined in both groups( P knife combined with rotation traction manipulation is an effective method for the treatment of cervical spondylotic radiculopathy, which is better than using manipulation method simply. Needle knife therapy has follow advantages:improving local blood circulation, reducing local content of pain substance, increasing production of substances resisting pain, opening channels and collaterals, and make body reaching new static and dynamic balance on the new foundation.

  2. Deltoid muscular flap transfer for the treatment of irreparable rotator cuff tears

    Directory of Open Access Journals (Sweden)

    Justus Gille

    2009-09-01

    Full Text Available The purpose of this study was to evaluate the outcome of deltoid muscle flap transfer for the treatment of irreparable rotator cuff tears. In a retrospective study 20 consecutive patients were evaluated. The index procedure took place between 2000 and 2003. Fifteen patients were male, mean age was 62 years. Inclusion criterion was a rotator cuff defect Bateman grade IV. Exclusion criteria were smaller defects, shoulder instability and fractures of the injured shoulder. An open reconstruction with acromioplasty and a pedicled delta flap was performed. Follow up period was mean 42 months. Follow-up included clinical examination, Magnetic Resonance Imaging (MRI and the Constant and Simple (CS shoulder tests. According to the Constant shoulder test the results were good in 13 patients, fair in 5 and unsatisfactory in 2. The pre-operative Constant Score improved from mean 25.7 points (±5.3 to 72.3 (±7.8 at follow-up. The mean values for the subcategories of CS increased significantly from 3.9 to 14.4 points for pain and from 4.2 to 15.9 points for activities daily routine (p0.05. Results of the Simple Shoulder Test showed a significant increase of the mean values from pre-operative 4.3 to 14.7 points post-operatively. MRI showed a subacromial covering of the defect in all cases, all flaps where intact on MRI but always the flap showed marked fatty degeneration. In conclusion, the delta flap is a simple method for the repair of large defects of the rotator cuff leading to satisfying medium results.

  3. Kinetics of the biodegradation of green table olive wastewaters by aerobic and anaerobic treatments

    International Nuclear Information System (INIS)

    Beltran, J.; Gonzalez, T.; Garcia, J.

    2008-01-01

    The biodegradation of the organic pollutant matter present in green table olive wastewater (GTOW) is studied in batch reactors by an aerobic biodegradation and by an anaerobic digestion. In the aerobic biodegradation, the evolution of the substrate (in terms of chemical and biochemical oxygen demand), biomass, and total polyphenolic compounds present in the wastewater are followed during the process, and a kinetic study is performed using Contois' model, which when applied to the experimental results provides the kinetic parameter of this model, resulting in a modified Contois' equation (q = 3.3S/(0.31S 0 X + X), gCOD/gVSS d -1 ). Other kinetic parameters were determined: the cellular yield coefficient (Y X/S = 5.7 x 10 -2 gVSS/gCOD) and the kinetic constant of cellular death phase (k d = 0.16 d -1 ). Similarly, in the anaerobic digestion, the evolution of the substrate digested and the methane produced are followed, and the kinetic study is conducted using a modified Monod model combined with the Levenspiel model, due to the presence of inhibition effects. This model leads to the determination of the kinetic parameters: kinetic constant when no inhibitory substance is present (k M0 = 8.4 x 10 -2 h -1 ), critical substrate concentration of inhibition (TP* = 0.34 g/L) and inhibitory parameter (n = 2.25)

  4. SU-F-T-509: Investigation into the Impact of the Linear Accelerator Treatment Table On Skin Dose to Prone Breast Patients

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, K; Irwin, J; Sansourekidou, P; Kriminski, S; Pavord, D [Health Quest, Poughkeepsie, NY (United States)

    2016-06-15

    Purpose: To investigate the impact of the treatment table on skin dose for prone breast patients for which the breast contacts the table and to develop a method to decrease skin dose. Methods: We used 12cm stack of 15cmx15cm solid water slabs to imitate breast. Calibrated EBT3 radiochromic film was affixed to the bottom of the phantom. Treatments for 32 patients were analyzed to determine typical prone breast beam parameters. Based on the analysis, a field size and a range of gantry angles were chosen for the test beams. Three experimental setups were used. The first represented the patient setup currently used in our clinics with the phantom directly on the table. The second was the skin sparing setup, with a 1.5cm Styrofoam slab between the phantom and the table. The third used a 7.5cm Styrofoam slab to examine the extent of skin sparing potential. The calibration curve was applied to each film to determine dose. Percent difference in dose between the current and skin sparing setups was calculated for each gantry angle and gantry angle pair. Results: Data showed that beams entering through the table showed a skin dose decrease ranging from 13%–30% with the addition of 7.5cm Styrofoam, while beams exiting through the table showed no significant difference. The addition of 1.5cm Styrofoam resulted in differences ranging from 0.5%–13% with the skin sparing setup. Conclusion: The results demonstrate that skin in contact with the table receives increased dose from beams entering through the table. By creating separation between the breast and the table with Styrofoam the skin dose can be lowered, but 1.5 cm did not fully mitigate the effect. Further investigation will be performed to identify a clinically practical thickness that maximizes this mitigation.

  5. Arthroscopic treatment for intratendinous rotator cuff tear results in satisfactory clinical outcomes and structural integrity.

    Science.gov (United States)

    Cheon, Sang Jin; Lee, Hyo Yeol; Jeon, Woong Ki

    2018-04-20

    This study aimed to evaluate the clinical outcomes and structural integrity of arthroscopic repair of intratendinous rotator cuff tear. Patients who were diagnosed with an intratendinous tear but in whom conservative treatment failed were selected and underwent arthroscopic repair. Between 2008 and 2014, a total of 30 patients (6 men, 24 women; mean age, 59 ± 3.7 years) met the inclusion criteria and were followed up. The mean follow-up period was 26.3 ± 0.7 months. The results were evaluated using the University of California at Los Angeles (UCLA) score, the Society of the American Shoulder and Elbow Surgeons rating scale (ASES) questionnaire, and the visual analog scale (VAS) and range of motion (ROM) were measured preoperatively and at final follow-up. Magnetic resonance imaging (MRI) was performed preoperatively and at 6.7 ± 0.2 months postoperatively. Postoperative MRI was performed on 27 out of 30 patients and analysed using the Sugaya classification. Corresponding to the preoperative MRI findings, arthroscopic findings of intratendinous tears were observed in all 30 patients. The mean active forward elevation ROM was 137.3° ± 15.4° before surgery and 168.8° ± 15.2° at the final follow-up. The internal and external rotations at abduction were 31.7° ± 5.1° and 63.0° ± 11.6° before surgery, respectively, and 60.5° ± 8.0° and 75.2° ± 10.8° after surgery, respectively. The UCLA score improved from of 20.1 ± 7.4 points preoperative to 28.4 ± 5.5 points at the final follow-up. The ASES score improved from 55.7 ± 15.3 points preoperative to 82.6 ± 9.7 points postoperatively. The VAS for pain score decreased from 6.4 ± 1.2 points preoperative to 1.6 ± 0.9 points postoperative. Satisfactory outcomes (excellent/good) in terms of UCLA and ASES scores were observed in 29 of 30 patients. Based on Sugaya classification, grades I, II, and III structural integrities were observed in 9

  6. The optimal treatment for stage 2-3 Goutallier rotator cuff tears: A systematic review of the literature.

    Science.gov (United States)

    Hollman, Freek; Wolterbeek, Nienke; Flikweert, Petra E; Yang, Kiem G Auw

    2018-06-01

    Fatty infiltration is an important prognostic factor for cuff healing after rotator cuff repair. Treatment options for stage 2-3 Goutallier rotator cuff tears vary widely and there is lack of decent comparative studies. The objective of this study was 1) to give an overview of the treatment options of stage 2-3 Goutallier rotator cuff tears and their clinical outcome and 2) to give a recommendation of the optimal treatment within this specific subgroup. We searched the databases of Medline, Embase, Cochrane library, NHS Centre for Reviews and Dissemination, PEDro from inception to December 12th, 2016. Two authors, F.H. and N.W., selected the studies after consensus. Data was extracted by one author (F.H.) and checked for completeness by a second author (N.W.). Our primary outcome was physical function, measured by shoulder-specific patient reported outcomes. Secondary outcomes were cuff integrity after rotator cuff repair, shoulder pain, general health, quality of life, activity level and adverse events. For the first research question 28 prospective as well as retrospective studies were included. For the clinical outcome of these treatments three randomized controlled trials were included. Despite the high reported retear rate, rotator cuff repair has comparable results (clinical improvement) as partial repair and isolated bicepstenotomy or tenodesis. These findings suggest that the additional effect of rotator cuff repair compared to the less extensive treatment options like isolated bicepstenotomy or tenodesis should be studied, as these might form a good alternative treatment based on this systematic review. Level IV; systematic review.

  7. One-stage surgical treatment for concomitant rotator cuff tears with shoulder stiffness has comparable results with isolated rotator cuff tears: a systematic review.

    Science.gov (United States)

    Sabzevari, Soheil; Kachooei, Amir Reza; Giugale, Juan; Lin, Albert

    2017-08-01

    Addressing preoperative shoulder stiffness before rotator cuff repair (RCR) is advocated, but the effectiveness of this approach is debatable. We hypothesized that 1-stage treatment of concomitant rotator cuff tear (RCT) with shoulder stiffness has comparable results with isolated RCT. Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, the databases including MEDLINE, Embase, Cochrane Library, and Scopus were searched using the keywords of "shoulder stiffness" OR "adhesive capsulitis" OR "frozen shoulder" AND "rotator cuff." Studies that met all the criteria compared the 2 arms of isolated RCT vs. RCT with concomitant shoulder stiffness, received no physical therapy before surgery, and reported data of preoperative and postoperative range of motion (ROM) and functional outcomes after surgery. Four level III studies met the inclusion criteria. The non-stiff group (isolated RCT) included 460 patients who underwent RCR; the stiff group (RCT with concomitant shoulder stiffness) included 111 patients who underwent RCR and manipulation under anesthesia with or without capsular release. There were significant differences in preoperative ROM between stiff and non-stiff groups. At final follow-up, there were no statistical differences in all ROM between the 2 groups. There was no significant difference in comparing preoperative and postoperative outcome scores including visual analog scale for pain, Constant, modified American Shoulder and Elbow Surgeons, and University of California-Los Angeles scores. Concomitant surgical treatment of nonmassive RCT and moderate shoulder stiffness in 1 stage may have comparable results to the surgical treatment of RCT in patients without preoperative stiffness. Therefore, a physical therapy regimen before surgical intervention may not be necessary. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  8. Comparison of the effect of low-power laser with therapeutic ultrasound on the treatment of rotator cuff tendonitis

    Directory of Open Access Journals (Sweden)

    asghar Akbari

    2009-01-01

    Full Text Available Akbari A1 1. Assistant Professor, Department of Physiotherapy, Faculty of Medicine, Zahedan University of Medical Sciences Abstract Background: Shoulder pain is the third most prevalent cause of musculoskeletal disorder after low back and cervical pains. Most of the shoulder symptoms are attributed to the rotator cuff. The objective of this study was to compare the effects of low-power laser therapy with ultrasound therapy on the patients with rotator cuff tendonitis. Materials and methods: This clinical trial was performed in Zahedan university of medical sciences in 2006. Thirty patients with rotator cuff tendonitis were randomly assigned to either a low-power laser therapy group (15 patients or an ultrasound therapy group (15 patients. Strength (kg of shoulder abductor, and internal and external rotator muscles, as well as range (degree of shoulder abduction, and internal and external rotation were measured before and after intervention using hand-held dynamometer and goniometer respectively. The pain was evaluated using the visual analogue scale. In the laser group, a low-level Ga-As laser was applied with a 100 mw point probe (average power, wave length of 905 nm, pulse duration of 200 ns, 6 J/cm2 dosage, 5 KHz frequency, and lasting 3 minutes. The ultrasound treatment was applied with a power of 1 W/cm2, a frequency of 1 MHz, pulse mode of 1:4, and lasting 10 minutes on each occasion. The treatment was carried out 3 times weekly for 10 days. The data were analyzed using independent sample t-test and paired t-test. Results: The pain in the laser group was significantly decreased from 6.06±1.6 to 5±1.3 in abduction, from 5.3±1.5 to 4.7±1.3 in internal rotation, and from 5.06±1.4 to 4.3±1.44 in external rotation (p0.05. A significant improvement after treatment was observed in the laser group in measures of shoulder abductor, internal rotator and external rotator muscles strength compared to those of the ultrasound therapy group (p<0

  9. Rotating biological contractor treatment of 2-nitrophenol and 2-chlorophenol containing hazardous wastes

    International Nuclear Information System (INIS)

    Tokuz, R.Y.

    1990-01-01

    Rotating Biological Contactors (RBCs) have a number of advantages over other biological treatment systems. For example, they can provide high treatment efficiencies of activated sludge systems with much lower energy inputs. Organic shock loads are handled well because large biomass is present. No bulking, foaming, or floating of sludge occurs and sludge has good settleability and dewaterability. Another advantage of RBC systems is the minimal labor requirement for operation and maintenance. Even though RBC systems have these advantages, their acceptance was slow mainly due to operational problems with the earlier units (such as shaft failures) and the lack of considerable design and operation data. A review of literature shows that there is only limited information available on the wastewater treatment with RBCs. Recently, there has been considerable contributions to the knowledge on RBC technology. However, information on the treatment of organic hazardous wastes using RBCs is still very limited. This paper reports that a considerable number of studies on the biological treatment of organic hazardous compounds was sponsored by U.S. Environmental Protection Agency (EPA). For example, an EPA sponsored study examined the effect of such compounds on the performance of activated sludge process. Bench-scale continuous-flow and batch units were used. Influent was settled municipal wastewater to which toxic compounds were added. In batch operations, 2-chlorophenol and pentachlorophenol caused an increase in the effluent Chemical Oxygen Demand (COD) at an influent concentration of 5 mg/L. No adverse effect of 2-nitrophenol on the batch system was reports. 2-Chlorophenol was one of the compounds that upset the performance of continuous-flow activated sludge units, yielding higher than normal levels of effluent suspended solids

  10. The assessment of the coke wastewater treatment efficacy in rotating biological contractor.

    Science.gov (United States)

    Cema, G; Żabczyński, S; Ziembińska-Buczyńska, A

    2016-01-01

    Coke wastewater is known to be relatively difficult for biological treatment. Nonetheless, biofilm-based systems seem to be promising tool for such treatment. That is why a rotating biological contactor (RBC) system focused on the Anammox process was used in this study. The experiment was divided into two parts with synthetic and then real wastewater. It was proven that it is possible to treat coke wastewater with RBC but such a procedure requires a very long start-up period for the nitritation (190 days), as well as for the Anammox process, where stable nitrogen removal over 70% was achieved after 400 days of experiment. Interestingly, it was possible at a relatively low (20.2 ± 2.2 °C) temperature. The polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) based monitoring of the bacterial community showed that its biodiversity decreased when the real wastewater was treated and it was composed mainly of GC-rich genotypes, probably because of the modeling influence of this wastewater and the genotypes specialization.

  11. Cortical activation during mental rotation in male-to-female and female-to-male transsexuals under hormonal treatment.

    Science.gov (United States)

    Carrillo, Beatriz; Gómez-Gil, Esther; Rametti, Giuseppina; Junque, Carme; Gomez, Angel; Karadi, Kazmer; Segovia, Santiago; Guillamon, Antonio

    2010-09-01

    There is strong evidence of sex differences in mental rotation tasks. Transsexualism is an extreme gender identity disorder in which individuals seek cross-gender treatment to change their sex. The aim of our study was to investigate if male-to-female (MF) and female-to-male (FM) transsexuals receiving cross-sex hormonal treatment have different patterns of cortical activation during a three-dimensional (3D) mental rotation task. An fMRI study was performed using a 3-T scan in a sample of 18 MF and 19 FM under chronic cross-sex hormonal treatment. Twenty-three males and 19 females served as controls. The general pattern of cerebral activation seen while visualizing the rotated and non-rotated figures was similar for all four groups showing strong occipito-parieto-frontal brain activation. However, compared to control males, the activation of MF transsexuals during the task was lower in the superior parietal lobe. Compared to control females, MF transsexuals showed higher activation in orbital and right dorsolateral prefrontal regions and lower activation in the left prefrontal gyrus. FM transsexuals did not differ from either the MF transsexual or control groups. Regression analyses between cerebral activation and the number of months of hormonal treatment showed a significant negative correlation in parietal, occipital and temporal regions in the MF transsexuals. No significant correlations with time were seen in the FM transsexuals. In conclusion, although we did not find a specific pattern of cerebral activation in the FM transsexuals, we have identified a specific pattern of cerebral activation during a mental 3D rotation task in MF transsexuals under cross-sex hormonal treatment that differed from control males in the parietal region and from control females in the orbital prefrontal region. The hypoactivation in MF transsexuals in the parietal region could be due to the hormonal treatment or could reflect a priori cerebral differences between MF transsexual

  12. Noise generator for tinnitus treatment based on look-up tables

    Science.gov (United States)

    Uriz, Alejandro J.; Agüero, Pablo; Tulli, Juan C.; Castiñeira Moreira, Jorge; González, Esteban; Hidalgo, Roberto; Casadei, Manuel

    2016-04-01

    Treatment of tinnitus by means of masking sounds allows to obtain a significant improve of the quality of life of the individual that suffer that condition. In view of that, it is possible to develop noise synthesizers based on random number generators in digital signal processors (DSP), which are used in almost any digital hearing aid devices. DSP architecture have limitations to implement a pseudo random number generator, due to it, the noise statistics can be not as good as expectations. In this paper, a technique to generate additive white gaussian noise (AWGN) or other types of filtered noise using coefficients stored in program memory of the DSP is proposed. Also, an implementation of the technique is carried out on a dsPIC from Microchip®. Objective experiments and experimental measurements are performed to analyze the proposed technique.

  13. SU-E-T-348: Effect of Treatment Table and Immobilization Devices On Surface Dose When Using a GRID Technique

    Energy Technology Data Exchange (ETDEWEB)

    Gajdos, S; Donaghue, J [Akron General Medical Center, Akron, OH (United States)

    2015-06-15

    Purpose: To determine the increase of surface dose of MLC-designed GRID therapy in the presence of immobilization devices and treatment table. Methods: To create a GRID field, our facility utilizes an MLC consisting of four millimeter wide leaves. The field is designed to have aperture sizes of 0.8 cm X 0.8 cm with inter-aperture distance of 3.2 cm. Gafchromic EBT3 film was placed between the surface of a solid water phantom and the immobilization device. The treatment table was also present within the beam path. The devices consist of carbon fiber exterior shell. A piece of film was also placed at maximal depth for the photon energy of 10 MV. Image files were converted to dose per a calibration curve based on the selected red channel. The surface dose to maximum dose was established by comparing the ratio of seven centrally located aperture regions-of-interest and four adjacent inter-aperture regions-of-interest were measured with the available software tools. Results: With no devices present in beam path, the ratio of surface dose to maximum dose was 11.5% ± 0.3% for aperture region and 7.0% ± 0.1% for inter-aperture region. When devices are present, the ratio of surface dose to maximum dose was 45.2% ± 0.5% and 33.8% ± 1.1%, respectively. Due to the presence of devices, the surface dose increases in aperture region by 3.8 times or in the inter-aperture region by 4.7 times. Conclusion: The purpose of using GRID technique is to deliver a single fractional dose in range of 15–20 Gy to a bulky lesion while also preserving skin tolerance. The increase of surface dose due to devices placed in beam path may increase the chance of skin toxicity in GRID therapy. Care should be used to determine best manageable patient immobilization while considering skin dose especially for posteriorly located lesions.

  14. Rod rotation and differential rod contouring followed by direct vertebral rotation for treatment of adolescent idiopathic scoliosis: effect on thoracic and thoracolumbar or lumbar curves assessed with intraoperative computed tomography.

    Science.gov (United States)

    Seki, Shoji; Kawaguchi, Yoshiharu; Nakano, Masato; Makino, Hiroto; Mine, Hayato; Kimura, Tomoatsu

    2016-03-01

    Although direct vertebral rotation (DVR) is now used worldwide for the surgical treatment of adolescent idiopathic scoliosis (AIS), the benefit of DVR in reducing vertebral body rotation in these patients has not been determined. We investigated a possible additive effect of DVR on further reduction of vertebral body rotation in the axial plane following intraoperative rod rotation or differential rod contouring in patients undergoing surgical treatment for AIS. The study was a prospective computed tomography (CT) image analysis. We analyzed the results of the two intraoperative procedures in 30 consecutive patients undergoing surgery for AIS (Lenke type I or II: 15; Lenke type V: 15). The angle of reduction of vertebral body rotation taken by intraoperative CT scan was measured and analyzed. Pre- and postoperative responses to the Scoliosis Research Society 22 Questionnaire (SRS-22) were also analyzed. To analyze the reduction of vertebral body rotation with rod rotation or DVR, intraoperative cone-beam CT scans of the three apical vertebrae of the major curve of the scoliosis (90 vertebrae) were taken pre-rod rotation (baseline), post-rod rotation with differential rod contouring, and post-DVR in all patients. The angle of vertebral body rotation in these apical vertebrae was measured and analyzed for statistical significance. Additionally, differences between thoracic curve scoliosis (Lenke type I or II; 45 vertebrae) and thoracolumbar or lumbar curve scoliosis (Lenke type V; 45 vertebrae) were analyzed. Pre- and postoperative SRS-22 scores were evaluated in all patients. The mean (90 vertebrae) vertebral body rotation angles at baseline, post-rod rotation or differential rod contouring, and post-rod rotation or differential rod contouring or post-DVR were 17.3°, 11.1°, and 6.9°, respectively. The mean reduction in vertebral body rotation with the rod rotation technique was 6.8° for thoracic curves and 5.7° for thoracolumbar or lumbar curves (pself

  15. Long-term functional evaluation of videoarthroscopic treatment of partial injuries of the rotator cuff

    Directory of Open Access Journals (Sweden)

    Glaydson Gomes Godinho

    2015-04-01

    Full Text Available OBJECTIVE: To compare the functional results from high and low-grade isolated partial lesions of the supraspinatus tendon of bursal and articular types, after arthroscopic treatment.METHODS: Sixty-four patients with isolated partial lesions of the supraspinatus tendon were evaluated. The mean length of follow-up was 76 months (range: 29-193. The mean age was 59 years (range: 36-82. The dominant side was affected in 44 patients (68.8%. There were 35 bursal lesions (54.7% and 29 articular lesions (45.3%. We used the Ellman classification and characterized the lesions as low or high-grade according to whether they affected less than or more than 50% of the tendon thickness, respectively. Debridement was performed in 15 patients (23.5%, repair without completing the lesion in 11 (17% and repair after completing the lesion in 38 (59.5%. The functional assessments on the patients were done using the Constant & Murley and UCLA scores.RESULTS: The mean Constant & Murley score among the patients with bursal lesions was 82.64 ± 6.98 (range: 59.3-99 and among those with articular lesions, 83.57 ± 7.58 (range: 66-95, while the mean UCLA score in the bursal lesions was 33.37 ± 2.85 (range: 21-35 and in the articular lesions, 32.83 ± 2.95 (range: 22-35.CONCLUSION: Videoarthroscopic treatment of partial lesions of the rotator cuff presents good or excellent results when the low-grade lesions are debrided and the high-grade lesions are completed and repaired. These results are maintained over the long term, with a high satisfaction rate and few complications.

  16. Using the modified Delphi method to establish clinical consensus for the diagnosis and treatment of patients with rotator cuff pathology

    Directory of Open Access Journals (Sweden)

    Breda H. Eubank

    2016-05-01

    Full Text Available Abstract Background Patients presenting to the healthcare system with rotator cuff pathology do not always receive high quality care. High quality care occurs when a patient receives care that is accessible, appropriate, acceptable, effective, efficient, and safe. The aim of this study was twofold: 1 to develop a clinical pathway algorithm that sets forth a stepwise process for making decisions about the diagnosis and treatment of rotator cuff pathology presenting to primary, secondary, and tertiary healthcare settings; and 2 to establish clinical practice guidelines for the diagnosis and treatment of rotator cuff pathology to inform decision-making processes within the algorithm. Methods A three-step modified Delphi method was used to establish consensus. Fourteen experts representing athletic therapy, physiotherapy, sport medicine, and orthopaedic surgery were invited to participate as the expert panel. In round 1, 123 best practice statements were distributed to the panel. Panel members were asked to mark “agree” or “disagree” beside each statement, and provide comments. The same voting method was again used for round 2. Round 3 consisted of a final face-to-face meeting. Results In round 1, statements were grouped and reduced to 44 statements that met consensus. In round 2, five statements reached consensus. In round 3, ten statements reached consensus. Consensus was reached for 59 statements representing five domains: screening, diagnosis, physical examination, investigations, and treatment. The final face-to-face meeting was also used to develop clinical pathway algorithms (i.e., clinical care pathways for three types of rotator cuff pathology: acute, chronic, and acute-on-chronic. Conclusion This consensus guideline will help to standardize care, provide guidance on the diagnosis and treatment of rotator cuff pathology, and assist in clinical decision-making for all healthcare professionals.

  17. Using the modified Delphi method to establish clinical consensus for the diagnosis and treatment of patients with rotator cuff pathology.

    Science.gov (United States)

    Eubank, Breda H; Mohtadi, Nicholas G; Lafave, Mark R; Wiley, J Preston; Bois, Aaron J; Boorman, Richard S; Sheps, David M

    2016-05-20

    Patients presenting to the healthcare system with rotator cuff pathology do not always receive high quality care. High quality care occurs when a patient receives care that is accessible, appropriate, acceptable, effective, efficient, and safe. The aim of this study was twofold: 1) to develop a clinical pathway algorithm that sets forth a stepwise process for making decisions about the diagnosis and treatment of rotator cuff pathology presenting to primary, secondary, and tertiary healthcare settings; and 2) to establish clinical practice guidelines for the diagnosis and treatment of rotator cuff pathology to inform decision-making processes within the algorithm. A three-step modified Delphi method was used to establish consensus. Fourteen experts representing athletic therapy, physiotherapy, sport medicine, and orthopaedic surgery were invited to participate as the expert panel. In round 1, 123 best practice statements were distributed to the panel. Panel members were asked to mark "agree" or "disagree" beside each statement, and provide comments. The same voting method was again used for round 2. Round 3 consisted of a final face-to-face meeting. In round 1, statements were grouped and reduced to 44 statements that met consensus. In round 2, five statements reached consensus. In round 3, ten statements reached consensus. Consensus was reached for 59 statements representing five domains: screening, diagnosis, physical examination, investigations, and treatment. The final face-to-face meeting was also used to develop clinical pathway algorithms (i.e., clinical care pathways) for three types of rotator cuff pathology: acute, chronic, and acute-on-chronic. This consensus guideline will help to standardize care, provide guidance on the diagnosis and treatment of rotator cuff pathology, and assist in clinical decision-making for all healthcare professionals.

  18. Mass transfer behavior of rotating square cylinder electrochemical reactor in relation to wastewater treatment

    International Nuclear Information System (INIS)

    Abdel-Aziz, M.S.M.; El-Shazly, A.H.; Farag, H.A.; Sedahmed, G.H.

    2011-01-01

    Highlights: → The work explores a new electrochemical reactor by using square rotating cylinders. → The results show that it is superior to the traditional circular rotating cylinder. → A dimensionless design equation for the new reactor was correlated. → The oxalic acid removal by the new reactor was succeeded and found promising. → The energy consumption per kg oxalic acid removed by the unit was calculated. - Abstract: Rates of mass transfer at a rotating square cylinder were measured by an electrochemical technique which involved measuring the limiting current of the cathodic reduction of K 3 Fe(CN) 6 in a large excess of NaOH solution. Variables studied were: cylinder rotation speed, physical properties of the solution and cylinder equivalent diameter. The data for the condition 1577 0.33 Re 0.45 For a given set of conditions the rate of mass transfer at the square rotating cylinder was found to be higher than that at the traditional circular rotating cylinder by an amount ranging from 47% to 200% depending on Re. The use of the square rotating cylinder electrode in removing oxalic acid from wastewater by anodic oxidation on Pb/PbO anode was examined and found to be promising.

  19. Application of Coulomb and Lorentz gauge conditions for the pertubative treatment of a rotation fermions system

    International Nuclear Information System (INIS)

    Bes, D.R.

    1984-01-01

    The history of the development of quantum field theory for treating coupling between phonons and fermions are summarized. These perturbative theories are applied introducing concept of gauge invariance for the problem of rotation nuclei. (L.C.) [pt

  20. Frontal Changes in the Lower Face After Clockwise Rotation of the Maxillomandibular Complex Without Perisurgical Orthodontic Treatment in Angle Class I and Skeletal Class III Women.

    Science.gov (United States)

    Lee, Sang Woo; Cho, Jeongmok; Kim, Kikap; Ahn, Seung Hyun

    2017-06-01

    Orthognathic surgery has become more popular to slenderize a wide lower face and to improve facial esthetics in Asian patients with normal occlusion. Clockwise rotation (CR) of the maxillomandibular complex (MMC) steepens the mandibular plane. This study performed a quantitative analysis on the influence of CR on slenderness of the lower face from the frontal view. This retrospective study included 36 female patients with Angle Class I occlusion and skeletal Class III pattern. The subjects underwent CR of the MMC without perioperative orthodontic treatment and change in the occlusion only for the purpose of esthetic improvement. Linear and angular variables were measured on a cephalogram and three-dimensional computed tomography (3D CT) obtained before and at least 6 months after surgery. Data were analyzed using paired t tests and Spearman correlations. Univariate regression analysis was used to predict the postoperative change according to the amount of posterior impaction. The mean posterior impaction was 3.81 mm. All mandibular plane angle (MPA) measurements were increased (ranged from 5.69° to 13.12°, p lower face becomes narrower and more slender as the MMC rotates in a clockwise direction. Orthognathic surgery with CR has the advantage of increasing the MPAs and obtaining natural soft tissue contouring while minimizing the amount of bone resection. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266c .

  1. SU-F-T-406: Verification of Total Body Irradiation Commissioned MU Lookup Table Accuracy Using Treatment Planning System for Wide Range of Patient Sizes

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, D; Chi, P; Tailor, R; Aristophanous, M; Tung, S [UT MD Anderson Cancer Center, Houston, TX (United States)

    2016-06-15

    Purpose: To verify the accuracy of total body irradiation (TBI) measurement commissioning data using the treatment planning system (TPS) for a wide range of patient separations. Methods: Our institution conducts TBI treatments with an 18MV photon beam at 380cm extended SSD using an AP/PA technique. Currently, the monitor units (MU) per field for patient treatments are determined using a lookup table generated from TMR measurements in a water phantom (75 × 41 × 30.5 cm3). The dose prescribed to an umbilicus midline point at spine level is determined based on patient separation, dose/ field and dose rate/MU. One-dimensional heterogeneous dose calculations from Pinnacle TPS were validated with thermoluminescent dosimeters (TLD) placed in an average adult anthropomorphic phantom and also in-vivo on four patients with large separations. Subsequently, twelve patients with various separations (17–47cm) were retrospectively analyzed. Computed tomography (CT) scans were acquired in the left and right decubitus positions from vertex to knee. A treatment plan for each patient was generated. The ratio of the lookup table MU to the heterogeneous TPS MU was compared. Results: TLD Measurements in the anthropomorphic phantom and large TBI patients agreed with Pinnacle calculated dose within 2.8% and 2%, respectively. The heterogeneous calculation compared to the lookup table agreed within 8.1% (ratio range: 1.014–1.081). A trend of reduced accuracy was observed when patient separation increases. Conclusion: The TPS dose calculation accuracy was confirmed by TLD measurements, showing that Pinnacle can model the extended SSD dose without commissioning a special beam model for the extended SSD geometry. The difference between the lookup table and TPS calculation potentially comes from lack of scatter during commissioning when compared to extreme patient sizes. The observed trend suggests the need for development of a correction factor between the lookup table and TPS dose

  2. Efficient and accurate stereotactic radiotherapy using flattening filter free beams and HexaPOD robotic tables

    DEFF Research Database (Denmark)

    Nielsen, Morten; Hansen, C. R.; Brink, C.

    2016-01-01

    Flattening filter free (FFF) high dose rate beam technique was introduced for brain stereotactic radiosurgery (SRS) and lung Stereotactic Body Radiotherapy (SBRT). Furthermore, a HexaPOD treatment table was introduced for the brain SRS to enable correction of rotational setup errors. 19 filter fl...

  3. SU-E-T-521: Feasibility Study of a Rotational Step-And-Shoot IMRT Treatment Planning Approach

    International Nuclear Information System (INIS)

    Zhu, X; Chang, S; Cullip, T; Yuan, L; Zhang, X; Lian, J; Tang, X; Tracton, G; Dooley, J

    2014-01-01

    Purpose: Rotational step-and-shot IMRT (r-IMRT) could improve delivery efficiency with good dose conformity, especially if it can leverage the burst mode of the accelerator where radiation is turned on/off momentarily while the gantry rotates continuously. The challenge for the r-IMRT planning is to minimize the number of beams to achieve a fast and smooth rotational delivery. Methods: Treatment plans for r-IMRT were created using an in-house treatment planning system. To generate the plan using a very few beams, gantry angle was optimized by weighting the beam monitoring unit (MU), and beam shape optimization was a combination of column search with k-means clustering. A prostate case and a head and neck case were planned using r-IMRT. The dosimetry is compared to s-IMRT planned with Varian Eclipse treatment planning system. Results: With the same PTV dose coverage D95=100%, the r-IMRT plans shows comparable sparing as the s-IMRT plans in the prostate for the rectum D10cc and the bladder Dmean, and in the head and neck for the spinal cord Dmax, the brain stem Dmax, the left/right parotid Dmean, the larynx Dmean, and the mandible Dmean. Both plans meet the established institutional clinical dosimetric criteria. The r-IMRT plan uses 19 beam/405 MU for the prostate, and 68 beam/880 MU for the head and neck, while the s-IMRT uses 7 beam/724 MU and 9 beam/1812 MU, respectively. Compared to the corresponding s-IMRT, r-IMRT has a reduction of MUs of 44% for the prostate case and 41% for the head and neck case. Conclusions: We have demonstrated the feasibility of a rotational step and shoot IMRT treatment planning approach that significantly shortens the conventional IMRT treatment beam-on time without degrading the dose comformity

  4. SU-E-T-521: Feasibility Study of a Rotational Step-And-Shoot IMRT Treatment Planning Approach

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, X [Univ. of North Carolina at Chapel Hill, Chapel Hill, NC (United States); Chang, S [UNC School of Medicine, Chapel Hill, NC (United States); Cullip, T [UNC Hospitals, Chapel Hill, NC (United States); Yuan, L; Zhang, X [Duke University, Durham, NC (United States); Lian, J; Tang, X [UniversityNorth Carolina, Chapel Hill, NC (United States); Tracton, G; Dooley, J [University of North Carolina, Chapel Hill, NC (United States)

    2014-06-01

    Purpose: Rotational step-and-shot IMRT (r-IMRT) could improve delivery efficiency with good dose conformity, especially if it can leverage the burst mode of the accelerator where radiation is turned on/off momentarily while the gantry rotates continuously. The challenge for the r-IMRT planning is to minimize the number of beams to achieve a fast and smooth rotational delivery. Methods: Treatment plans for r-IMRT were created using an in-house treatment planning system. To generate the plan using a very few beams, gantry angle was optimized by weighting the beam monitoring unit (MU), and beam shape optimization was a combination of column search with k-means clustering. A prostate case and a head and neck case were planned using r-IMRT. The dosimetry is compared to s-IMRT planned with Varian Eclipse treatment planning system. Results: With the same PTV dose coverage D95=100%, the r-IMRT plans shows comparable sparing as the s-IMRT plans in the prostate for the rectum D10cc and the bladder Dmean, and in the head and neck for the spinal cord Dmax, the brain stem Dmax, the left/right parotid Dmean, the larynx Dmean, and the mandible Dmean. Both plans meet the established institutional clinical dosimetric criteria. The r-IMRT plan uses 19 beam/405 MU for the prostate, and 68 beam/880 MU for the head and neck, while the s-IMRT uses 7 beam/724 MU and 9 beam/1812 MU, respectively. Compared to the corresponding s-IMRT, r-IMRT has a reduction of MUs of 44% for the prostate case and 41% for the head and neck case. Conclusions: We have demonstrated the feasibility of a rotational step and shoot IMRT treatment planning approach that significantly shortens the conventional IMRT treatment beam-on time without degrading the dose comformity.

  5. Integration of Three-Dimensional Rotational Angiography in Radiosurgical Treatment Planning of Cerebral Arteriovenous Malformations

    International Nuclear Information System (INIS)

    Conti, Alfredo; Pontoriero, Antonio; Farago, Giuseppe; Midili, Federica; Siragusa, Carmelo; Granata, Francesca; Pitrone, Antonio; De Renzis, Costantino; Longo, Marcello; Tomasello, Francesco

    2011-01-01

    Purpose: Accuracy in delineating the target volume is a major issue for successful stereotactic radiosurgery for arteriovenous malformations. The aim of the present study was to describe a method to integrate three-dimensional (3D) rotational angiography ( (3DRA)) into CyberKnife treatment planning and to investigate its potential advantages compared with computed tomography angiography (CTA) and magnetic resonance angiography. Methods and Materials: A total of 20 patients with a diagnosis of cerebral arteriovenous malformation were included in the present study. All patients underwent multislice computed tomography and 3D-volumetric CTA, (3DRA), and 3D magnetic resonance angiography. The contouring of the target and critical volumes was done separately using CTA and thereafter directly using (3DRA). The composite, conjoint, and disjoint volumes were measured. Results: The use of CTA or (3DRA) resulted in significant differences in the target and critical volumes. The target volume averaged 3.49 ± 3.01 mL measured using CTA and 3.26 ± 2.93 mL measured using (3DRA), for a difference of 8% (p < .05). The conjoint and disjoint volume analysis showed an 88% volume overlap. The qualitative evaluation showed that the excess volume obtained using CTA was mostly tissue surrounding the nidus and venous structures. The mean contoured venous volume was 0.67 mL measured using CTA and 0.88 mL (range, 0.1-2.7) measured using (3DRA) (p < .05). Conclusions: (3DRA) is a volumetric angiographic study that can be integrated into computer-based treatment planning. Although whether (3DRA) provides superior accuracy has not yet been proved, its high spatial resolution is attractive and offers a superior 3D view. This allows a better 3D understanding of the target volume and distribution of the radiation doses within the volume. Additional technical efforts to improve the temporal resolution and the development of software tools aimed at improving the performance of 3D contouring are

  6. Self-managed loaded exercise versus usual physiotherapy treatment for rotator cuff tendinopathy: a pilot randomised controlled trial.

    Science.gov (United States)

    Littlewood, Chris; Malliaras, Peter; Mawson, Sue; May, Stephen; Walters, Stephen J

    2014-03-01

    Rotator cuff tendinopathy is a common source of shoulder pain characterised by persistent and/or recurrent problems for a proportion of sufferers. The aim of this study was to pilot the methods proposed to conduct a substantive study to evaluate the effectiveness of a self-managed loaded exercise programme versus usual physiotherapy treatment for rotator cuff tendinopathy. A single-centre pragmatic unblinded parallel group pilot randomised controlled trial. One private physiotherapy clinic, northern England. Twenty-four participants with rotator cuff tendinopathy. The intervention was a programme of self-managed loaded exercise. The control group received usual physiotherapy treatment. Baseline assessment comprised the Shoulder Pain and Disability Index (SPADI) and the Short-Form 36, repeated three months post randomisation. The recruitment target was met and the majority of participants (98%) were willing to be randomised. 100% retention was attained with all participants completing the SPADI at three months. Exercise adherence rates were excellent (90%). The mean change in SPADI score was -23.7 (95% CI -14.4 to -33.3) points for the self-managed exercise group and -19.0 (95% CI -6.0 to -31.9) points for the usual physiotherapy treatment group. The difference in three month SPADI scores was 0.1 (95% CI -16.6 to 16.9) points in favour of the usual physiotherapy treatment group. In keeping with previous research which indicates the need for further evaluation of self-managed loaded exercise for rotator cuff tendinopathy, these methods and the preliminary evaluation of outcome offer a foundation and stimulus to conduct a substantive study. Copyright © 2013 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

  7. Arthroscopic Removal and Rotator Cuff Repair Without Acromioplasty for the Treatment of Symptomatic Calcifying Tendinitis of the Supraspinatus Tendon.

    Science.gov (United States)

    Ranalletta, Maximiliano; Rossi, Luciano Andrés; Bongiovanni, Santiago Luis; Tanoira, Ignacio; Piuzzi, Nicolas; Maignon, Gastón

    2015-04-01

    Calcified rotator cuff tendinitis is a common cause of chronic shoulder pain that leads to significant pain and functional limitations. Although most patients respond well to conservative treatment, some eventually require surgical treatment. To evaluate the clinical outcome with arthroscopic removal of calcific deposit and rotator cuff repair without acromioplasty for the treatment of calcific tendinitis of the supraspinatus tendon. Case series; Level of evidence, 4. This study retrospectively evaluated 30 consecutive patients with a mean age of 49.2 years. The mean follow-up was 35 months (range, 24-88 months). Pre- and postoperative functional assessment was performed using the Constant score, University of California Los Angeles (UCLA) score, and Quick Disabilities of the Arm, Shoulder, and Hand (DASH). Pain was assessed by visual analog scale (VAS). Radiographs and magnetic resonance imaging (MRI) were performed to evaluate the recurrence of calcifications and the indemnity of the supraspinatus tendon repair. Significant improvement was obtained for pain (mean VAS, 8.7 before surgery to 0.8 after; P rotator cuff repair without acromioplasty can lead to good results in patients with symptomatic calcifying tendonitis of the supraspinatus tendon.

  8. The effect of rotational deformity on patellofemoral parameters following the treatment of femoral shaft fracture.

    Science.gov (United States)

    Yildirim, Ahmet Ozgur; Aksahin, Ertuğrul; Sakman, Bulent; Kati, Yusuf Alper; Akti, Sefa; Dogan, Ozgur; Ucaner, Ahmet; Bicimoglu, Ali

    2013-05-01

    The purpose of this study was to investigate the effect of rotational deformities on patellofemoral alignment using the dynamic magnetic resonance imaging method on patients whose femur fractures were treated with intramedullary locking nails. The dynamic patellofemoral magnetic resonance imaging results of 33 patients (5 females and 28 males) were reviewed. The mean age of the patients was 36.3 (range 19-61) years. The mean follow-up was 30.2 months (range 24-38). All the patients were given Kujala patellofemoral clinical evaluation scores at the latest follow-up. Those with less than 10° of rotational deformity in either direction were classified as Group A, those with more than a 10° of internal rotation deformity as Group B and more than a 10° of external rotation deformity as Group C. The three groups were then compared regarding to clinical scores. Patellofemoral parameters of operated and contralateral side were also compared in each group. There were 14 (42.4 %) patients in Group A, 12 (36.4 %) patients in Group B and 7 (21.2 %) patients in Group C. The mean patella score in Group C (74 ± 7.02) was significantly lower when compared with Group B (87.6 ± 9.9) and group A (90.6 ± 6.1) (p < 0.05). In Group C patients, medial patellar tilt was detected when compared with the intact side. There were no significant changes in patellofemoral position in either Group A or Group B. The results of this study revealed that more than 10° of external rotation deformity could cause a detoriation in the patellofemoral scores. Anatomic reduction of the fracture site should be performed as soon as possible and external rotational deformities should especially be avoided in order to prevent patellofemoral malalignment.

  9. Trial of finger contamination reduction of the operator in nerve block treatment. Comparison of over- and under-table systems

    International Nuclear Information System (INIS)

    Saito, Hajime; Okabe, Keigo; Nakazawa, Yasuo

    2004-01-01

    Fluoroscopy-guided intervention of the lumbar spine, such as nerve block, plays an important role in the management of disc hernia patients. However, irradiation of operators' fingers remains a problem even with careful collimation and operation, especially when performed by non-radiologists. We compared the irradiation doses of under-table and over-table fluoroscopy systems, and we discuss the most advantageous method of reducing irradiation. The effectiveness and conditions of use of lead protection gloves were also evaluated. Skin dose was monitored using polymethyl methacrylate (PMMA) and an electronic dose meter. The skin doses of over- and under-table fluoroscopy were compared using C-arm fluoroscopy. Finger irradiation dose with 0.03 mmPb protection gloves was also measured. The under-table method reduced skin dose by 95% compared with the over-table method. Thicker PMMA resulted in a higher rate of irradiation reduction. Protection gloves reduced radiation dose by half, although this reduction was cancelled when automatic brightness control (ABC) was utilized. Under-tube fluoroscopy was superior to over-tube fluoroscopy in reducing irradiation to the fingers. (author)

  10. Comparative study between lateral decubitus and traction table for treatment of pertrochanteric fractures with cephalomedullary nails ☆

    Directory of Open Access Journals (Sweden)

    Eric Fernando de Souza

    Full Text Available ABSTRACT OBJECTIVE: To perform a retrospective radiographic assessment of the reduction and implant position in the femoral head in patients with pertrochanteric fractures treated with cephalomedullary nailing in the lateral position versus traction table. METHODS: Radiographs of patients with pertrochanteric fracture of the femur treated with cephalomedullary nailing in the lateral position and traction table were retrospectively evaluated. For the evaluation we used the anteroposterior radiographic view of the pelvis and the lateral view of the affected side. The cervicodiaphyseal angle, the tip-apex distance (TAD, and the spatial position of the cephalic component in the head were measured. Two patient groups were created, one group operated on the traction table and another group operated in the lateral position. RESULTS: Regarding the cervicodiaphyseal angle observed in the traction table group, the results of 11 patients (61.1% were outside the acceptable parameters proposed in the present study. Both groups were equivalent regarding TAD and the position of the cephalic component in the head. CONCLUSION: A difference in the cervicodiaphyseal angle was observed; the group operated on the traction table had 11 patients (61.1% whose measurements were outside the acceptable parameters.

  11. Low-Cost Alternative External Rotation Shoulder Brace and Review of Treatment in Acute Shoulder Dislocations

    Directory of Open Access Journals (Sweden)

    Lacy, Kyle

    2015-01-01

    Full Text Available Traumatic dislocations of the shoulder commonly present to emergency departments (EDs. Immediate closed reduction of both anterior and posterior glenohumeral dislocations is recommended and is frequently performed in the ED. Recurrence of dislocation is common, as anteroinferior labral tears (Bankart lesions are present in many anterior shoulder dislocations.14,15,18,23 Immobilization of the shoulder following closed reduction is therefore recommended; previous studies support the use of immobilization with the shoulder in a position of external rotation, for both anterior and posterior shoulder dislocations.7-11,19 In this study, we present a technique for assembling a low-cost external rotation shoulder brace using materials found in most hospitals: cotton roll, stockinette, and shoulder immobilizers. This brace is particularly suited for the uninsured patient, who lacks the financial resources to pay for a pre-fabricated brace out of pocket. We also performed a cost analysis for our low-cost external rotation shoulder brace, and a cost comparison with pre-fabricated brand name braces. At our institution, the total materials cost for our brace was $19.15. The cost of a pre-fabricated shoulder brace at our institution is $150 with markup, which is reimbursed on average at $50.40 according to our hospital billing data. The low-cost external rotation shoulder brace is therefore a more affordable option for the uninsured patient presenting with acute shoulder dislocation. [West J Emerg Med. 2015;16(1:114–120.

  12. Tomographic examination table

    International Nuclear Information System (INIS)

    Redington, R.W.; Henkes, J.L.

    1979-01-01

    Equipment is described for positioning and supporting patients during tomographic mammography using X-rays. The equipment consists of a table and fabric slings which permit the examination of a downward, pendant breast of a prone patient by allowing the breast to pass through a aperture in the table into a fluid filled container. The fluid has an X-ray absorption coefficient similar to that of soft human tissue allowing high density resolution radiography and permitting accurate detection of breast tumours. The shape of the equipment and the positioning of the patient allow the detector and X-ray source to rotate 360 0 about a vertical axis through the breast. This permits the use of relatively simple image reconstruction algorithms and a divergent X-ray geometry. (UK)

  13. Safety and efficacy of rotational atherectomy for the treatment of undilatable underexpanded stents implanted in calcific lesions.

    Science.gov (United States)

    Ferri, Luca A; Jabbour, Richard J; Giannini, Francesco; Benincasa, Susanna; Ancona, Marco; Regazzoli, Damiano; Mangieri, Antonio; Montorfano, Matteo; Colombo, Antonio; Latib, Azeem

    2017-08-01

    Coronary stent underexpansion is a known risk factor for in-stent restenosis and stent thrombosis. There are limited options once noncompliant balloons have failed to achieve optimal stent expansion. Excimer Laser Coronary Angioplasty with contrast medium injection is one possibility, but not readily available. Rotational atherectomy is an alternative, and has been described in case reports, but concerns exist regarding safety. All consecutive patients undergoing rotational atherectomy for symptomatic in-stent restenosis due to stent underexpansion resistant to noncompliant balloon postdilatation between January 2005 and December 2015 were analysed. A total of 16 patients underwent treatment during the study period and the procedure was successful in 14 cases (87.5%). The mean postprocedural minimal lumen diameter increased by 2.3 ± 0.8 mm and percentage diameter stenosis decreased from 82.17% ± 17.2% to 11.9% ± 9.1%. Intraprocedural complications occurred in two patients (burr entrapment successfully managed percutaneously and periprocedural myocardial infarction). At 1-year follow-up, the incidence of target lesion revascularisation was 13.3% (2 out of 15 patients), and one patient died from noncardiac death. In this small series of underexpanded stents, rotational atherectomy was an effective treatment for resistant stent underexpansion with acceptable outcomes. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  14. Scanning table

    CERN Multimedia

    1960-01-01

    Before the invention of wire chambers, particles tracks were analysed on scanning tables like this one. Today, the process is electronic and much faster. Bubble chamber film - currently available - (links can be found below) was used for this analysis of the particle tracks.

  15. Effects of post-harvest treatment using chitosan from Mucor circinelloides on fungal pathogenicity and quality of table grapes during storage.

    Science.gov (United States)

    de Oliveira, Carlos Eduardo Vasconcelos; Magnani, Marciane; de Sales, Camila Veríssimo; Pontes, Alline Lima de Souza; Campos-Takaki, Galba Maria; Stamford, Thayza Christina Montenegro; de Souza, Evandro Leite

    2014-12-01

    The aim of this study was to extract chitosan (CHI) from Mucor circinelloides UCP 050 grown in a corn steep liquor (CSL)-based medium under optimized conditions and to assess the efficacy of the obtained CHI to inhibit the post-harvest pathogenic fungi Aspergillus niger URM 5162 and Rhizopus stolonifer URM 3482 in laboratory media and as a coating on table grapes (Vitis labrusca L.). The effect of CHI coating on some physical, physicochemical and sensory characteristics of the fruits during storage was assessed. The greatest amount of CHI was extracted from M. circinelloides UCP 050 grown in medium containing 7 g of CSL per 100 mL at pH 5.5 with rotation at 180 rpm. CHI from M. circinelloides UCP 050 caused morphological changes in the spores of the fungal strains tested and inhibited mycelial growth and spore germination. CHI coating delayed the growth of the assayed fungal strains in artificially infected grapes, as well as autochthonous mycoflora during storage. CHI coating preserved the quality of grapes during storage, as measured by their physical, physicochemical and sensory attributes. These results demonstrate that edible coatings derived from M. circinelloides CHI could be a useful alternative for controlling pathogenic fungi and maintaining the post-harvest quality of table grapes. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. MO-F-CAMPUS-T-03: Data Driven Approaches for Determination of Treatment Table Tolerance Values for Record and Verification Systems

    International Nuclear Information System (INIS)

    Gupta, N; DiCostanzo, D; Fullenkamp, M

    2015-01-01

    Purpose: To determine appropriate couch tolerance values for modern radiotherapy linac R&V systems with indexed patient setup. Methods: Treatment table tolerance values have been the most difficult to lower, due to many factors including variations in patient positioning and differences in table tops between machines. We recently installed nine linacs with similar tables and started indexing every patient in our clinic. In this study we queried our R&V database and analyzed the deviation of couch position values from the acquired values at verification simulation for all patients treated with indexed positioning. Mean and standard deviations of daily setup deviations were computed in the longitudinal, lateral and vertical direction for 343 patient plans. The mean, median and standard error of the standard deviations across the whole patient population and for some disease sites were computed to determine tolerance values. Results: The plot of our couch deviation values showed a gaussian distribution, with some small deviations, corresponding to setup uncertainties on non-imaging days, and SRS/SRT/SBRT patients, as well as some large deviations which were spot checked and found to be corresponding to indexing errors that were overriden. Setting our tolerance values based on the median + 1 standard error resulted in tolerance values of 1cm lateral and longitudinal, and 0.5 cm vertical for all non- SRS/SRT/SBRT cases. Re-analizing the data, we found that about 92% of the treated fractions would be within these tolerance values (ignoring the mis-indexed patients). We also analyzed data for disease site based subpopulations and found no difference in the tolerance values that needed to be used. Conclusion: With the use of automation, auto-setup and other workflow efficiency tools being introduced into radiotherapy workflow, it is very essential to set table tolerances that allow safe treatments, but flag setup errors that need to be reassessed before treatments

  17. MO-F-CAMPUS-T-03: Data Driven Approaches for Determination of Treatment Table Tolerance Values for Record and Verification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, N; DiCostanzo, D; Fullenkamp, M [Ohio State University, Columbus, OH (United States)

    2015-06-15

    Purpose: To determine appropriate couch tolerance values for modern radiotherapy linac R&V systems with indexed patient setup. Methods: Treatment table tolerance values have been the most difficult to lower, due to many factors including variations in patient positioning and differences in table tops between machines. We recently installed nine linacs with similar tables and started indexing every patient in our clinic. In this study we queried our R&V database and analyzed the deviation of couch position values from the acquired values at verification simulation for all patients treated with indexed positioning. Mean and standard deviations of daily setup deviations were computed in the longitudinal, lateral and vertical direction for 343 patient plans. The mean, median and standard error of the standard deviations across the whole patient population and for some disease sites were computed to determine tolerance values. Results: The plot of our couch deviation values showed a gaussian distribution, with some small deviations, corresponding to setup uncertainties on non-imaging days, and SRS/SRT/SBRT patients, as well as some large deviations which were spot checked and found to be corresponding to indexing errors that were overriden. Setting our tolerance values based on the median + 1 standard error resulted in tolerance values of 1cm lateral and longitudinal, and 0.5 cm vertical for all non- SRS/SRT/SBRT cases. Re-analizing the data, we found that about 92% of the treated fractions would be within these tolerance values (ignoring the mis-indexed patients). We also analyzed data for disease site based subpopulations and found no difference in the tolerance values that needed to be used. Conclusion: With the use of automation, auto-setup and other workflow efficiency tools being introduced into radiotherapy workflow, it is very essential to set table tolerances that allow safe treatments, but flag setup errors that need to be reassessed before treatments.

  18. Rotator cuff injuries: current perspectives and trends for treatment and rehabilitation

    Directory of Open Access Journals (Sweden)

    Fabio Antonio Vieira

    2015-12-01

    Full Text Available ABSTRACT OBJECTIVE: To map out the approaches used by Brazilian orthopedists in treating complete tears of the rotator cuff. METHODS: A multiple-choice questionnaire was handed out to 232 orthopedists at the 45th Brazilian Congress of Orthopedics and Traumatology. Of these, 207 were returned but five were incomplete and were excluded. Thus, 202 questionnaires were used. RESULTS: Among the orthopedists who answered the questionnaires, around 60% were from the southeastern region and 46% were shoulder and elbow surgeons. There was a significant association ( p < 0.05 between length of experience and number of rotator cuff repairs performed per year. There was also a significant association ( p < 0.05 between shoulder specialty and the following variables: arthroscopic technique, use of anchors in a single-row configuration, mean time taken for an indication for surgery to be made in cases of traumatic and degenerative lesions, use of a specific protocol for postsurgical rehabilitation, return to sport and indication of irreparable injuries. CONCLUSIONS: Brazilian shoulder surgeons have well-established approaches toward treating rotator cuff injuries. Most of these approaches differ significantly from those of other specialties. This shows the importance of placing value on training in preparing shoulder specialists in this country.

  19. Outcome assessment in the treatment of rotator cuff tear: what is utilized in Brazil?

    Directory of Open Access Journals (Sweden)

    Jorge Henrique Assunção

    Full Text Available ABSTRACT This review evaluated the outcomes used in clinical studies involving rotator cuff tear published in the last decade in the two leading Brazilian orthopedic journals. A literature review was performed using the journals Revista Brasileira de Ortopedia and Acta Ortopédica Brasileira. It included all original clinical articles describing at least one outcome measured before or after any clinical or surgical intervention related to rotator cuff tear, published between 2006 and 2015. The authors evaluated range of motion, muscle strength, patient satisfaction, and tendon integrity and functional outcomes scores. There were 25 clinical studies published about rotator cuff in the two principal Brazilian orthopedic journals in the last decade, 20 case series (80%, one case-control (4%, and four cohorts (16%. Objective measures such as muscle strength, patient satisfaction, and evaluation of tendon integrity were little used. Range of motion measurements were performed in 52% of the articles. Evaluations of muscle strength and patient satisfaction were reported by 28% and 16% of the studies, respectively. Only 28% of the articles evaluated tendon integrity after surgery. Of these, 16% did so by magnetic resonance imaging and 12% by , ultrasonography. The most used scale was the UCLA, present in 92% of the articles, while the Constant-Murley appeared in 20%. Scales deemed reliable, with high internal consistency and good responsiveness, were rarely used.

  20. On the Lippmann--Schwinger equation for atom--diatom collisions: A rotating frame treatment

    International Nuclear Information System (INIS)

    Kouri, D.J.; Heil, T.G.; Shimoni, Y.

    1976-01-01

    The use of a rotating frame description of molecular collisions is reconsidered within the framework of the Lippmann--Schwinger equation for the transition or T operator. The present approach explicitly displays the proper boundary conditions which apply to descriptions of such collisions in the rotating frame whose Z axis follows the scattering vector. The resulting body frame equations are shown to lead naturally to the introduction of ''body frame Bessel and Hankel functions,'' J/subJ//subj//sup lambda//sup lambda//sup prime/ and H/subJ//subj//sup lambda//sup lambda//sup prime/ (BFBF), which are solutions of the unperturbed Hamiltonian for the collision transformed to the rotating frame. It is found that the BFBF can be defined in several ways differing by phase factors that affect their asymptotic form. Two particular choices are examined, one of which leads to a simple asymptotic form of the wavefunction, and the other leads to a somewhat more complicated form. Both are shown to yield the j/subz/-conserving coupled states equations of McGuire and Kouri but slightly different approximations are required in the two cases. The implication of these results as to the accuracy of the j/subz/CCS method are discussed

  1. What happens to patients when we do not repair their cuff tears? Five-year rotator cuff quality-of-life index outcomes following nonoperative treatment of patients with full-thickness rotator cuff tears.

    Science.gov (United States)

    Boorman, Richard S; More, Kristie D; Hollinshead, Robert M; Wiley, James P; Mohtadi, Nicholas G; Lo, Ian K Y; Brett, Kelly R

    2018-03-01

    The purpose of this study was to examine 5-year outcomes in a prospective cohort of patients previously enrolled in a nonoperative rotator cuff tear treatment program. Patients with chronic (>3 months), full-thickness rotator cuff tears (demonstrated on imaging) who were referred to 1 of 2 senior shoulder surgeons were enrolled in the study between October 2008 and September 2010. They participated in a comprehensive, nonoperative, home-based treatment program. After 3 months, the outcome in these patients was defined as "successful" or "failed." Patients in the successful group were essentially asymptomatic and did not require surgery. Patients in the failed group were symptomatic and consented to undergo surgical repair. All patients were followed up at 1 year, 2 years, and 5 or more years. At 5 or more years, all patients were contacted for follow-up; the response rate was 84%. Approximately 75% of patients remained successfully treated with nonoperative treatment at 5 years and reported a mean rotator cuff quality-of-life index score of 83 of 100 (SD, 16). Furthermore, between 2 and 5 years, only 3 patients who had previously been defined as having a successful outcome became more symptomatic and underwent surgical rotator cuff repair. Those in whom nonoperative treatment had failed and who underwent surgical repair had a mean rotator cuff quality-of-life index score of 89 (SD, 11) at 5-year follow-up. The operative and nonoperative groups at 5-year follow-up were not significantly different (P = .11). Nonoperative treatment is an effective and lasting option for many patients with a chronic, full-thickness rotator cuff tear. While some clinicians may argue that nonoperative treatment delays inevitable surgical repair, our study shows that patients can do very well over time. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  2. Qualification of the calculational methods of the fluence in the pressurised water reactors. Improvement of the cross sections treatment by the probability table method

    International Nuclear Information System (INIS)

    Zheng, S.H.

    1994-01-01

    It is indispensable to know the fluence on the nuclear reactor pressure vessel. The cross sections and their treatment have an important rule to this problem. In this study, two ''benchmarks'' have been interpreted by the Monte Carlo transport program TRIPOLI to qualify the calculational method and the cross sections used in the calculations. For the treatment of the cross sections, the multigroup method is usually used but it exists some problems such as the difficulty to choose the weighting function and the necessity of a great number of energy to represent well the cross section's fluctuation. In this thesis, we propose a new method called ''Probability Table Method'' to treat the neutron cross sections. For the qualification, a program of the simulation of neutron transport by the Monte Carlo method in one dimension has been written; the comparison of multigroup's results and probability table's results shows the advantages of this new method. The probability table has also been introduced in the TRIPOLI program; the calculational results of the iron deep penetration benchmark has been improved by comparing with the experimental results. So it is interest to use this new method in the shielding and neutronic calculation. (author). 42 refs., 109 figs., 36 tabs

  3. Drawing up of a selection table of the most appropriate gas treatment coming from anthropogenical fixed sources emitted to the atmosphere

    International Nuclear Information System (INIS)

    Monge Calvo, Karla Maria

    2000-01-01

    This inform has like an general objective the creation of a reference table which allows to simplify the selection of the most appropriate treatment method for the gas decontamination emitted to the atmosphere. To go ahead with this job, it performed a bibliographic research of the different method's kinds: dry, humid, complementary and of gas's cleaning for gas and steams. Later, for to draw up the table, it was decided to treat different methodologies and equipment by aside, as well as to include variables of design like: kind of industry and emission, characteristics or properties of the particles, as well as answer variables among that includes: treatment's methods, advantages and disadvantages when it utilizes such equipment. This research is limited to theoretical studies and data. This study intent to be the first guide for to select the treatment's method for the decontamination most appropriate to the particular problem of every industry, since it was necessary a guide that allows to the user to identify the emissions treatment's methods and to apply them to the different contaminating industries, which at the same time it allows to take a quick and good decision, of the appropriate method, by means of a brief table that be easy to use. Seeing as the project is just theoretical, it wasn't possible to include a class of detail of the already installed equipment, since it didn't have measurements of the same. It doesn't cover the totality of cares, either that must be taken for the design of the different equipment suggested here, that's why for the final process's design it must be consulted other references. The advantage of the selection's table is that every equipment is treated by aside, which simplifies the appropriate method. Besides that allows to have a good idea of the suggested equipment's form thanks to the description and to the diagram that it contains. In order to use the table, is advised besides to consult different bibliographical sources

  4. A novel RE-chrome-boronizing technology assisted by fast multiple rotation rolling treatment at low temperature

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Xing-dong [School of Materials Science and Engineering, Shandong University, Jinan 250061 (China); School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 (China); Xu, Bin, E-mail: xubin@sdjzu.edu.cn [School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 (China); Cai, Yu-cheng [School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 (China)

    2015-12-01

    Highlights: • A nanostructured layer with grain size of approximately 30 nm was successfully fabricated in the upper-layer of carbon steel. • The penetrating rate was enhanced significantly by the fast multiple rotation rolling (FMRR) treatment at low temperature. • A novel and efficient RE-Chrome-Boronizing technology assisted by fast multiple rotation rolling (FMRR) treatment at low temperature was used to fabricate boride layers on the surface of carbon steel. - Abstract: The boride layer was fabricated on the surface of carbon steel by a novel RE-Chrome-Boronizing technology assisted by fast multiple rotation rolling (FMRR) treatment at low temperature. The microstructure of the boride layer was characterized by using scanning electron microscopy (SEM). The microstructure of the top surface layer of substrate was characterized by transmission electron microscopy (TEM) and high resolution rransmission electron microscopy (HRTEM). Experimental results showed that a nanostructured layer with grain size of approximately 30 nm was obtained; the amorphous phase and high-density dislocations were observed in upper-layer of FMRR samples, which led to the reduction of diffusion activation energy of boron atoms. Boride layers fabricated on the FMRR samples are continuous, dense, uniform, and low in brittleness. The penetrating rate was enhanced significantly when the FMRR samples were Cr-Rare earth-boronized at 650 °C for 6 h. The thickness of the boride layer of FMRR samples on carbon steel was approximately 25 μm when the duration was 60 min, which was approximately 1.5 times higher than the original sample. The boride layer consisted of mainly Fe2B, and adheres well to the metallic substrate.

  5. Rotations and angular momentum

    International Nuclear Information System (INIS)

    Nyborg, P.; Froyland, J.

    1979-01-01

    This paper is devoted to the analysis of rotational invariance and the properties of angular momentum in quantum mechanics. In particular, the problem of addition of angular momenta is treated in detail, and tables of Clebsch-Gordan coefficients are included

  6. Simultaneously photocatalytic treatment of hexavalent chromium (Cr(VI)) and endocrine disrupting compounds (EDCs) using rotating reactor under solar irradiation

    International Nuclear Information System (INIS)

    Kim, Youngji; Joo, Hyunku; Her, Namguk; Yoon, Yeomin; Sohn, Jinsik; Kim, Sungpyo; Yoon, Jaekyung

    2015-01-01

    Highlights: • Self-rotating reactor including TiO 2 NTs is applied under solar irradiation. • Simultaneously photocatalysis of Cr(VI) and EDCs is observed to be up to 95%. • Photocatalytic reactions of Cr(VI) and EDCs are favorable under acidic pH. • Charge interaction and hole scavenge between TiO 2 and pollutants are synergy factors. - Abstract: In this study, simultaneous treatments, reduction of hexavalent chromium (Cr(VI)) and oxidation of endocrine disrupting compounds (EDCs), such as bisphenol A (BPA), 17α-ethinyl estradiol (EE2) and 17β-estradiol (E2), were investigated with a rotating photocatalytic reactor including TiO 2 nanotubes formed on titanium mesh substrates under solar UV irradiation. In the laboratory tests with a rotating type I reactor, synergy effects of the simultaneous photocatalytic reduction and oxidation of inorganic (Cr(VI)) and organic (BPA) pollutants were achieved. Particularly, the concurrent photocatalytic reduction of Cr(VI) and oxidation of BPA was higher under acidic conditions. The enhanced reaction efficiency of both pollutants was attributed to a stronger charge interaction between TiO 2 nanotubes (positive charge) and the anionic form of Cr(VI) (negative charge), which are prevented recombination (electron–hole pair) by the hole scavenging effect of BPA. In the extended outdoor tests with a rotating type II reactor under solar irradiation, the experiment was extended to examine the simultaneous reduction of Cr(VI) in the presence of additional EDCs, such as EE2 and E2 as well as BPA. The findings showed that synergic effect of both photocatalytic reduction and oxidation was confirmed with single-component (Cr(VI) only), two-components (Cr(VI)/BPA, Cr(VI)/EE2, and Cr(VI)/E2), and four-components (Cr(VI)/BPA/EE2/E2) under various solar irradiation conditions

  7. Treatment of the calcific tendinopathy of the rotator cuff by ultrasound-guided percutaneous needle lavage. Two years prospective study

    Science.gov (United States)

    Castillo-González, Federico Del; Ramos-Álvarez, Juan José; Rodríguez-Fabián, Guillermo; González-Pérez, José; Calderón-Montero, Javier

    2014-01-01

    Summary Background: to evaluate the short and long term effectiveness of ultrasonography (US)-guided percutaneous needle lavage in calcific tendinopathy of the rotator cuff. To study the evolution of the size of calcifications and pain in the two years after treatment. Methods: study design: A 2 year longitudinal prospective study is carried out after applying the UGPL technique on a number of patients diagnosed with calcific tendinitis of the rotator cuff. Clinical, ultrasound and radiology follow-up controls were performed, 3 months, 6 months, one year and two years after the treatment. The Visual Analog Scale (VAS) was used to assess the pain. The degree and point of pain is selected on a 10 cm line, arranged horizontally or vertically. The “0” represents no pain and “10” represents worst pain. The population studied was made up of 121 patients that required our service as a result of suffering from a painful shoulder. Results: the pain (VAS) and the size of the calcification significantly decreased with the application of the technique (ptendinitis of the shoulder. The intervention is simple, cost-effective, does not require hospitalization, involves no complications, rehabilitation treatment is not required and it shows very few side effects without sequelae, significantly reducing the size of the calcification and pain in the majority of patients. PMID:25332939

  8. Asteroid rotation. IV

    International Nuclear Information System (INIS)

    Harris, A.W.; Young, J.W.

    1983-01-01

    The results from the year 1979 of an ongoing program of asteroid photometry at Table Mountain Observatory are presented. The results for 53 asteroids are summarized in a table, showing the number, name, opposition date, taxonomic class, diameter, absolute magnitude, mean absolute magnitude at zero phase angle and values of the absolute magnitude and linear phase coefficient derived from it, the rotation period in hours, peak-to-peak amplitude of variation, difference between mean and maximum brightness, and reliability index. Another table presents data on aspect and comparison stars, including brightness and distance data. Reliable rotation periods are reported for 22 asteroids for which no previous values are known. For seven asteroids, periods are reported which are revisions of previously reported values

  9. Treatment of amoxicillin by O3/Fenton process in a rotating packed bed.

    Science.gov (United States)

    Li, Mo; Zeng, Zequan; Li, Yingwen; Arowo, Moses; Chen, Jianfeng; Meng, Hong; Shao, Lei

    2015-03-01

    In this study, simulated amoxicillin wastewater was treated by the O3/Fenton process in a rotating packed bed (RPB) and the results were compared with the Fenton process and the O3 followed by Fenton (O3 + Fenton) process. The chemical oxygen demand (COD) removal rate and the ratio of 5-day biological oxygen demand to chemical oxygen demand (BOD5/COD) in the O3/Fenton process were approximately 17% and 26%, respectively, higher than those in the O3 + Fenton process with an initial pH of 3. The COD removal rate of the amoxicillin solution reached maximum at the Fe(II) concentration of 0.6 mM, temperature of 25 °C, rotation speed of 800 rpm and initial pH of 3. The BOD5/COD of the amoxicillin solution increased from 0 to 0.38 after the solution was treated by the O3/Fenton process. Analysis of the intermediates indicated that the pathway of amoxicillin degradation in the O3/Fenton process was similar to that in the O3 + Fenton process. Contrast experiment results showed that amoxicillin degradation was significantly intensified in the RPB. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. A normal mode treatment of semi-diurnal body tides on an aspherical, rotating and anelastic Earth

    Science.gov (United States)

    Lau, Harriet C. P.; Yang, Hsin-Ying; Tromp, Jeroen; Mitrovica, Jerry X.; Latychev, Konstantin; Al-Attar, David

    2015-08-01

    Normal mode treatments of the Earth's body tide response were developed in the 1980s to account for the effects of Earth rotation, ellipticity, anelasticity and resonant excitation within the diurnal band. Recent space-geodetic measurements of the Earth's crustal displacement in response to luni-solar tidal forcings have revealed geographical variations that are indicative of aspherical deep mantle structure, thus providing a novel data set for constraining deep mantle elastic and density structure. In light of this, we make use of advances in seismic free oscillation literature to develop a new, generalized normal mode theory for the tidal response within the semi-diurnal and long-period tidal band. Our theory involves a perturbation method that permits an efficient calculation of the impact of aspherical structure on the tidal response. In addition, we introduce a normal mode treatment of anelasticity that is distinct from both earlier work in body tides and the approach adopted in free oscillation seismology. We present several simple numerical applications of the new theory. First, we compute the tidal response of a spherically symmetric, non-rotating, elastic and isotropic Earth model and demonstrate that our predictions match those based on standard Love number theory. Second, we compute perturbations to this response associated with mantle anelasticity and demonstrate that the usual set of seismic modes adopted for this purpose must be augmented by a family of relaxation modes to accurately capture the full effect of anelasticity on the body tide response. Finally, we explore aspherical effects including rotation and we benchmark results from several illustrative case studies of aspherical Earth structure against independent finite-volume numerical calculations of the semi-diurnal body tide response. These tests confirm the accuracy of the normal mode methodology to at least the level of numerical error in the finite-volume predictions. They also demonstrate

  11. Determination of the attenuation due to the treatment table according to the angle of gantry for system treatments verification Delta4

    International Nuclear Information System (INIS)

    Linares Doblado, R.; Mateo Rodriguez, B.; Perucha Ortega, M.

    2013-01-01

    The optimal solution to the problem of absorption into the table would be to incorporate it into the system of planning as one structure more, but not all planners incorporate this functionality. As an alternative solution, approximate, this paper evaluates through measures in the system mentioned effect, with the aim of obtaining a table of absorption vs. angle of gantry, for different field sizes that will be used to correct the dose values recorded by the QA system. Research on the effect of the corrections in the histograms of dose and gamma. (Author)

  12. Impact of preharvest and postharvest alginate treatments enriched with vanillin on postharvest decay, biochemical properties, quality and sensory attributes of table grapes.

    Science.gov (United States)

    Konuk Takma, Dilara; Korel, Figen

    2017-04-15

    Alginate solution enriched with vanillin as a bioactive compound was investigated for improving preharvest and postharvest quality and safety of table grapes. Alginate treatments with or without vanillin as preharvest spray and postharvest coating were implemented on table grapes of Alphonse Lavalleé and Razaki cultivars. Fungal decay, biochemical properties, quality and sensory attributes were evaluated at day of preharvest treatment, at harvesting and during 35days of storage at 4±2°C. Alginate treatments with or without vanillin were effective in preventing weight and firmness losses. Total soluble solids, titratable acidity, and color of grapes coated with alginate coatings with or without vanillin showed minor changes compared to control grapes. Alginate coating incorporating vanillin provided significant reduction (1.73log CFU/g) in yeast-mold growth. Moreover, the coatings maintained greater total phenolic content and antioxidant activity compared to others during postharvest storage. In terms of sensory attributes, appearance was ranked as the highest for alginate coating without vanillin due to glossiness of alginate. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Achieving a table-like magnetocaloric effect and large refrigerant capacity in in situ multiphase Gd65Mn25Si10 alloys obtained by crystallization treatment

    International Nuclear Information System (INIS)

    Shen, X Y; Zhong, X C; Huang, X W; Mo, H Y; Feng, X L; Liu, Z W; Jiao, D L

    2017-01-01

    In situ multiphase structure Gd 65 Mn 25 Si 10 alloys were fabricated by melt spinning and subsequent crystallization treatment. In the process of crystallization, the α -Gd, GdMn 2 and Gd 5 Si 3 phases precipitate in the amorphous matrix in turn. The Curie temperature ( T C ) values for the α -Gd crystallization phase and amorphous matrix can be tailored by tuning the crystallization treatment time. All three multiphase alloys obtained by crystallization treatment at 637 K for 20, 30 and 40 min, respectively, undergo multiple successive magnetic phase transitions. A table-like magnetic entropy change over a wide temperature range (∼90–120 K) and a large full width at half maximum (Δ T FWHM ) magnetic entropy change (∼230 K) were achieved in the above-mentioned crystallized alloys, resulting in large refrigerant capacities (RCs). The enhanced RCs of the three crystallized alloys for a magnetic field change of 0–5 T are in the range of 541–614 J kg −1 . Large Δ T FWHM and RC values and a table-like (−Δ S M ) max feature obtained in in situ multiphase Gd 65 Mn 25 Si 10 crystallized alloys make them suitable for potential application in efficient Ericsson-cycle magnetic refrigeration working in a temperature range from 74 to 310 K. (paper)

  14. Continuous Arc Rotation of the Couch Therapy for the Delivery of Accelerated Partial Breast Irradiation: A Treatment Planning Analysis

    International Nuclear Information System (INIS)

    Shaitelman, Simona F.; Kim, Leonard H.; Yan Di; Martinez, Alvaro A.; Vicini, Frank A.; Grills, Inga S.

    2011-01-01

    Purpose: We present a novel form of arc therapy: continuous arc rotation of the couch (C-ARC) and compare its dosimetry with three-dimensional conformal radiotherapy (3D-CRT), intensity-modulated radiotherapy (IMRT), and volumetric-modulated arc therapy (VMAT) for accelerated partial breast irradiation (APBI). C-ARC, like VMAT, uses a modulated beam aperture and dose rate, but with the couch, not the gantry, rotating. Methods and Materials: Twelve patients previously treated with APBI using 3D-CRT were replanned with (1) C-ARC, (2) IMRT, and (3) VMAT. C-ARC plans were designed with one medial and one lateral arc through which the couch rotated while the gantry was held stationary at a tangent angle. Target dose coverage was normalized to the 3D-CRT plan. Comparative endpoints were dose to normal breast tissue, lungs, and heart and monitor units prescribed. Results: Compared with 3D-CRT, C-ARC, IMRT, and VMAT all significantly reduced the ipsilateral breast V50% by the same amount (mean, 7.8%). Only C-ARC and IMRT plans significantly reduced the contralateral breast maximum dose, the ipsilateral lung V5Gy, and the heart V5%. C-ARC used on average 40%, 30%, and 10% fewer monitor units compared with 3D-CRT, IMRT, and VMAT, respectively. Conclusions: C-ARC provides improved dosimetry and treatment efficiency, which should reduce the risks of toxicity and secondary malignancy. Its tangent geometry avoids irradiation of critical structures that is unavoidable using the en face geometry of VMAT.

  15. Evaluation of the results from arthroscopic surgical treatment of rotator cuff injuries in patients aged 65 years and over

    Directory of Open Access Journals (Sweden)

    Alberto Naoki Miyazaki

    2015-06-01

    Full Text Available OBJECTIVES: To evaluate the results from arthroscopic surgical treatment of rotator cuff injuries in patients aged 65 years and over.METHODS: Between 1998 and 2009, 168 patients underwent operations. Five cases were excluded. The remaining 163 patients were stratified according to their age group: 65-69 years (49.1%, 70-74 (26.4% and 75 years and over (24.5%. Their mean age was 71 years (range: 65-83. There were 63 male patients (38.7%. The mean length of time with pain, from the onset of symptoms to the surgery, was 23 months (range: 2 days to 240 months. Sixty-two patients (38% reported histories of trauma and 26 (16% reported that their pain worsened through exertion.RESULTS: From the UCLA criteria, 80.4% of the results were excellent, 16% good, 1.8% fair and 1.8% poor. Complications occurred in 11%. The final clinical result did not show any correlation with age progression, injury size or tendons affected. However, there was a significant association (p < 0.001 between the presence of trauma and larger injuries. The length of time between the onset of symptoms and the surgical procedure had a significant relationship (p < 0.027 with the postoperative results: the longer this time was, the worse the results were.CONCLUSION: Arthroscopic treatment of rotator cuff injuries in patients aged 65 years and over presented excellent and good results in 96.4% of the cases, according to the UCLA assessment, with a low complication rate. Advanced age did not show any influence on the postoperative clinical evolution, but the earlier the surgical treatment was instituted, the better the results were.

  16. Effect of treatment duration on surface nanocrystallization induced by fast multiple rotation rolling and its thermal stability

    Energy Technology Data Exchange (ETDEWEB)

    Chui Pengfei; Liu Yi; Liang Yanjie; Li Yang [Key Laboratory for Liquid-Solid Structure Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan 250061 (China); Fan Suhua [Key Laboratory for Liquid-Solid Structure Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan 250061 (China); Shandong Women' s University, Jinan 250300 (China); Sun Kangning, E-mail: sunkangning@sdu.edu.cn [Key Laboratory for Liquid-Solid Structure Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan 250061 (China)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Effect of treatment time on surface nanocrystallization of a low carbon steel. Black-Right-Pointing-Pointer The grain size decreases gradually with the increase of treatment duration. Black-Right-Pointing-Pointer The microhardness of FMRR treated sample reaches 284 HV. Black-Right-Pointing-Pointer The nanocrystalline layer is stable during annealing treatment up to 400 Degree-Sign C. - Abstract: A nanocrystalline surface layer of low carbon steel induced by fast multiple rotation rolling (FMRR) was determined by optical microscopy and transmission electron microscopy. The results show that the grain size decreases gradually with the increase of treatment duration. Equiaxed nanocrystalline with the average grain size about 20 nm is obtained in the top surface layer after FMRR treatment for 30 min. With the increase of treatment duration (60 min), the average grain size further reduces to about 9 nm. At the same time, the microhardness of surface layer for treated sample is improved correspondingly owing to grain refinement and work-hardening. Compared with original sample, the microhardness of FMRR treated sample is increased by more than 200%. After annealing treatment, the investigation of thermal stability of nanocrystalline layer indicates that the grains begin to grow obviously at annealing for 400 Degree-Sign C, and abnormal grain growth also occurs in individual grains. Due to grain growth and stress relaxation during annealing, the microhardness slightly decreases at 400 Degree-Sign C. In spite of this, the majority of grains are still nanocrystalline, ranging from about 30 to 60 nm. It demonstrates that the nanocrystalline layer has high thermal stability.

  17. Technical Note: Improving the VMERGE treatment planning algorithm for rotational radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Gaddy, Melissa R., E-mail: mrgaddy@ncsu.edu; Papp, Dávid, E-mail: dpapp@ncsu.edu [Department of Mathematics, North Carolina State University, Raleigh, North Carolina 27695-8205 (United States)

    2016-07-15

    Purpose: The authors revisit the VMERGE treatment planning algorithm by Craft et al. [“Multicriteria VMAT optimization,” Med. Phys. 39, 686–696 (2012)] for arc therapy planning and propose two changes to the method that are aimed at improving the achieved trade-off between treatment time and plan quality at little additional planning time cost, while retaining other desirable properties of the original algorithm. Methods: The original VMERGE algorithm first computes an “ideal,” high quality but also highly time consuming treatment plan that irradiates the patient from all possible angles in a fine angular grid with a highly modulated beam and then makes this plan deliverable within practical treatment time by an iterative fluence map merging and sequencing algorithm. We propose two changes to this method. First, we regularize the ideal plan obtained in the first step by adding an explicit constraint on treatment time. Second, we propose a different merging criterion that comprises of identifying and merging adjacent maps whose merging results in the least degradation of radiation dose. Results: The effect of both suggested modifications is evaluated individually and jointly on clinical prostate and paraspinal cases. Details of the two cases are reported. Conclusions: In the authors’ computational study they found that both proposed modifications, especially the regularization, yield noticeably improved treatment plans for the same treatment times than what can be obtained using the original VMERGE method. The resulting plans match the quality of 20-beam step-and-shoot IMRT plans with a delivery time of approximately 2 min.

  18. Low temperature and short-term high-CO2 treatment in postharvest storage of table grapes at two maturity stages: Effects on transcriptome profiling.

    Directory of Open Access Journals (Sweden)

    Raquel Rosales

    2016-07-01

    Full Text Available Table grapes (Vitis vinifera cv. Cardinal are highly perishable and their quality deteriorates during postharvest storage at low temperature mainly because of sensitivity to fungal decay and senescence of rachis. The application of a 3-day CO2 treatment (20 kPa CO2 + 20 kPa O2 + 60 kPa N2 at 0ºC reduced total decay and retained fruit quality in early and late-harvested table grapes during postharvest storage. In order to study the transcriptional responsiveness of table grapes to low temperature and high CO2 levels in the first stage of storage and how the maturity stage affect these changes, we have performed a comparative large-scale transcriptional analysis using the custom-made GrapeGen GeneChip®. In the first stage of storage, low temperature led to a significantly intense change in grape skin transcriptome irrespective of fruit maturity, although there were different changes within each stage. In the case of CO2 treated samples, in comparison to fruit at time zero, only slight differences were observed. Functional enrichment analysis revealed that major modifications in the transcriptome profile of early- and late-harvested grapes stored at 0ºC are linked to biotic and abiotic stress-responsive terms. However, in both cases there is a specific reprogramming of the transcriptome during the first stage of storage at 0ºC in order to withstand the cold stress. Thus, genes involved in gluconeogenesis, photosynthesis, mRNA translation and lipid transport were up-regulated in the case of early-harvested grapes, and genes related to protein folding stability and intracellular membrane trafficking in late-harvested grapes. The beneficial effect of high CO2 treatment maintaining table grape quality seems to be an active process requiring the induction of several transcription factors and kinases in early-harvested grapes, and the activation of processes associated to the maintenance of energy in late-harvested grapes.

  19. Low Temperature and Short-Term High-CO2 Treatment in Postharvest Storage of Table Grapes at Two Maturity Stages: Effects on Transcriptome Profiling.

    Science.gov (United States)

    Rosales, Raquel; Romero, Irene; Fernandez-Caballero, Carlos; Escribano, M Isabel; Merodio, Carmen; Sanchez-Ballesta, M Teresa

    2016-01-01

    Table grapes (Vitis vinifera cv. Cardinal) are highly perishable and their quality deteriorates during postharvest storage at low temperature mainly because of sensitivity to fungal decay and senescence of rachis. The application of a 3-day CO2 treatment (20 kPa CO2 + 20 kPa O2 + 60 kPa N2) at 0°C reduced total decay and retained fruit quality in early and late-harvested table grapes during postharvest storage. In order to study the transcriptional responsiveness of table grapes to low temperature and high CO2 levels in the first stage of storage and how the maturity stage affect these changes, we have performed a comparative large-scale transcriptional analysis using the custom-made GrapeGen GeneChip®. In the first stage of storage, low temperature led to a significantly intense change in grape skin transcriptome irrespective of fruit maturity, although there were different changes within each stage. In the case of CO2 treated samples, in comparison to fruit at time zero, only slight differences were observed. Functional enrichment analysis revealed that major modifications in the transcriptome profile of early- and late-harvested grapes stored at 0°C are linked to biotic and abiotic stress-responsive terms. However, in both cases there is a specific reprogramming of the transcriptome during the first stage of storage at 0°C in order to withstand the cold stress. Thus, genes involved in gluconeogenesis, photosynthesis, mRNA translation and lipid transport were up-regulated in the case of early-harvested grapes, and genes related to protein folding stability and intracellular membrane trafficking in late-harvested grapes. The beneficial effect of high CO2 treatment maintaining table grape quality seems to be an active process requiring the induction of several transcription factors and kinases in early-harvested grapes, and the activation of processes associated to the maintenance of energy in late-harvested grapes.

  20. [Some aspects of use of rotating magnetic field for medical treatment].

    Science.gov (United States)

    Aleksandrov, V V; Ozornin, Iu I; Maslov, D G; Shchegoleva, S A

    2007-01-01

    The experience in the clinical use of the ALMA apparatus for general magnetic therapy is described. Recommendations are given for further scientific research into the applicability of general magnetic therapy for treatment of various diseases, including sociogenic pathologies (overweight, chronic intoxication, immunodeficiency).

  1. Hyperspectral remote sensing analysis of short rotation woody crops grown with controlled nutrient and irrigation treatments

    Science.gov (United States)

    Jungho Im; John R. Jensen; Mark Coleman; Eric. Nelson

    2009-01-01

    Hyperspectral remote sensing research was conducted to document the biophysical and biochemical characteristics of controlled forest plots subjected to various nutrient and irrigation treatments. The experimental plots were located on the Savannah River Site near Aiken, SC. AISA hyperspectral imagery were analysed using three approaches, including: (1) normalized...

  2. [TREATMENT OF PRONATION EXTERNAL ROTATION ANKLE FRACTURE COMBINED WITH SEPARATION OF DISTAL TIBIOFIBULAR SYNDESMOSIS].

    Science.gov (United States)

    Wu, Benwen; Ding, Zhenqi; Huang, Guofeng; Liu, Guojun; Cai, Zhemin; Ding, Luobin; Li, Xiang

    2016-09-08

    To evaluate the difference between using and not using syndesmotic screw to treat pronation external rotation (PER) ankle fracture combined with separation of distal tibiofibular syndesmosis. Between April 2011 and October 2014, 46 cases of PER ankle fracture combined with separation of distal tibiofibular syndesmosis were treated, and syndesmotic screw was used in 24 cases (fixation group) and syndesmotic screw was not used in 22 cases (non-fixation group). There was no significant difference in gender, age, weight, cause of injury, side, injury to operation time, and fracture type between 2 groups ( P >0.05). The time for full weight-bearing, fracture healing time, and complications were recorded after operation. Anteroposterior and lateral X-ray films were taken to measure the tibiofibular overlap (TBOL) and tibiofibular clear space (TBCS). Baird-Jackson score was used to evaluate functional recovery of the ankle. All incision healed by first intention without complications. The cases were followed up 13-18 months (mean, 15.2 months) in 2 groups. The time for full weight-bearing was 8-12 weeks (median, 11 weeks) in fixation group, which was significantly later than that in non-fixation group (range, 6-10 weeks; median, 8 weeks) ( Z =-5.049, P =0.000). X-ray examination showed reduction of separation of distal tibiofibular syndesmosis. All fractures healed. The fracture healing time was (13.83±1.37) weeks in fixation group, and was (13.91±1.31) weeks in non-fixation group, showing no significant difference ( t =-0.191, P =0.945). No separation of distal tibiofibular syndesmosis, delayed union, nonunion, loosening, or breakage of fixation devices was observed in 2 groups. There was no significant difference in TBOL, TBCS, Baird-Jackson score and the excellent and good rate between 2 groups ( P >0.05). If the medial, lateral, and posterior structures of the ankle could be repaired according to injury, no significant influence on functional outcome of ankle or

  3. Table 5

    African Journals Online (AJOL)

    STEPHEN SAMWEL

    inoculation assay for each tested compound and controls. For NDV assay, the ... quebrachitol (2) from A. modestus showed significant effective treatment against IBDV. The rest of the ... Such phenomenon animal-to-human host switching ...

  4. A treatment planning comparison between a novel rotating gamma system and robotic linear accelerator based intracranial stereotactic radiosurgery/radiotherapy

    Science.gov (United States)

    Fareed, Muhammad M.; Eldib, Ahmed; Weiss, Stephanie E.; Hayes, Shelly B.; Li, Jinsheng; C-M Ma, Charlie

    2018-02-01

    To compare the dosimetric parameters of a novel rotating gamma ray system (RGS) with well-established CyberKnife system (CK) for treating malignant brain lesions. RGS has a treatment head of 16 cobalt-60 sources focused to the isocenter, which can rotate 360° on the ring gantry and swing 35° in the superior direction. We compared several dosimetric parameters in 10 patients undergoing brain stereotactic radiosurgery including plan normalization, number of beams and nodes for CK and shots for RGS, collimators used, estimated treatment time, D 2 cm and conformity index (CI) among two modalities. The median plan normalization for RGS was 56.7% versus 68.5% (p  =  0.002) for CK plans. The median number of shots from RGS was 7.5 whereas the median number of beams and nodes for CK was 79.5 and 46. The median collimator’s diameter used was 3.5 mm for RGS as compared to 5 mm for CK (p  =  0.26). Mean D 2 cm was 5.57 Gy for CyberKnife whereas it was 3.11 Gy for RGS (p  =  0.99). For RGS plans, the median CI was 1.4 compared to 1.3 for the CK treatment plans (p  =  0.98). The average minimum and maximum doses to optic chiasm were 21 and 93 cGy for RGS as compared to 32 and 209 cGy for CK whereas these were 0.5 and 364 cGy by RGS and 18 and 399 cGy by CK to brainstem. The mean V12 Gy for brain predicting for radionecrosis with RGS was 3.75 cm3 as compared to 4.09 cm3 with the CK (p  =  0.41). The dosimetric parameters of a novel RGS with a ring type gantry are comparable with CyberKnife, allowing its use for intracranial lesions and is worth exploring in a clinical setting.

  5. Report of the European Society of Cardiology Cardiovascular Round Table regulatory workshop update of the evaluation of new agents for the treatment of acute coronary syndrome

    DEFF Research Database (Denmark)

    Bueno, Héctor; de Graeff, Pieter; Richard-Lordereau, Isabelle

    2016-01-01

    syndrome (ACS) to achieve consistency with current knowledge in the field. This manuscript summarizes the key output from a collaborative workshop, organized by the Cardiovascular Round Table and the European Affairs Committee of the European Society of Cardiology, involving clinicians, academic...... researchers, trialists, European and US regulators, and pharmaceutical industry researchers. Specific questions in four key areas were selected as priorities for changes in regulatory guidance: patient selection, endpoints, methodologic issues and issues related to the research for novel agents. Patients......Regulatory authorities interpret the results of randomized controlled trials according to published principles. The European Medicines Agency (EMA) is planning a revision of the 2000 and 2003 guidance documents on clinical investigation of new medicinal products for the treatment of acute coronary...

  6. Ultrasound imaging-guided percutaneous treatment of rotator cuff calcific tendinitis: success in short-term outcome.

    Science.gov (United States)

    Bazzocchi, Alberto; Pelotti, Patrizia; Serraino, Salvatore; Battaglia, Milva; Bettelli, Graziano; Fusaro, Isabella; Guglielmi, Giuseppe; Rotini, Roberto; Albisinni, Ugo

    2016-01-01

    Rotator cuff calcific tendinitis (RCCT) is a common cause of shoulder pain in adults and typically presents as activity-related shoulder pain. Between non-surgical and surgical treatment options, today a few minimal invasive techniques are available to remove the calcific deposit, and they represent a cornerstone in the management of this painful clinical condition. The aim of the work was a retrospective evaluation of double-needle ultrasound-guided percutaneous fragmentation and lavage (DNL), focused on understanding the factors which are of major importance in determining a quick and good response at 1 month. A series of 147 patients affected by RCCT and suitable for DNL were evaluated. A systematic review of anamnestic, clinical and imaging data was performed in 144 shoulders treated in a single-centre setting. Clinical reports and imaging examinations were revisited. The inclusion criteria were submission to DNL, therefore fitness for the percutaneous procedure, and following 1-month follow-up. There was no exclusion owing to risk of bias. The treatment was defined as successful for constant shoulder modified score (CSS) improvement of >50% at 1 month. In 70% of shoulders, the treatment resulted in a quick and significant reduction of symptoms (successful). On the whole, CSS increase at 1 month was estimated at 91.5 ± 69.1%. CSS variations were significantly related to age of patients (better results between 30 and 40 years old), calcification size (more relevant improvement for middle-sized calcifications, 12-17 mm), sonographic and radiographic features of calcific deposits (softer calcifications) and thickening of subacromial/subdeltoid bursa walls. In the final model of stepwise regression for CSS variation, ultrasound score pre-treatment and post-treatment, the distance between bursa and calcification before treatment and the size of post-treatment calcification area were shown to be independently correlated to success. Numeric rating scale score

  7. Idaho National Engineering Laboratory Conceptual Site Treatment Plan. Tables 8.1 and 8.2, Appendices A, B, C

    International Nuclear Information System (INIS)

    Eaton, D.

    1993-10-01

    The US Department of Energy (DOE) is required by Section 3021(b) of the Resource Conservation and Recovery Act (RCRA), as amended by the Federal Facility Compliance Act (FFCAct), to prepare plans describing the development of treatment capacities and technologies for treating mixed waste. The FFCAct requires site treatment plans (STPs or plans) to be developed for each site at which DOE generates or stores mixed waste and submitted to the host state or the US Environmental Protection Agency (EPA) for either approval, approval with modification, or disapproval. The Idaho National Engineering Laboratory (INEL) Conceptual Site Treatment Plan (CSTP) is the preliminary version of the plan required by the FFCAct and is being provided to the State of Idaho, the EPA, and others for review. A list of the other DOE sites preparing CSTPs is included in Appendix A of this document. In addition to aiding the INEL in formulating its Final Proposed STP, this CSTP will also provide information to other DOE sites for use in identifying common technology needs and potential options for treating their wastes. The INEL CSTP is also intended to be used in conjunction with CSTPs from other sites as a basis for nationwide discussions among state regulators, the EPA, and other interested parties on treatment strategies and options, and on technical and equity issues associated with DOE's mixed waste

  8. Idaho National Engineering Laboratory Conceptual Site Treatment Plan. Tables 8.1 and 8.2, Appendices A, B, C

    Energy Technology Data Exchange (ETDEWEB)

    Eaton, D.

    1993-10-01

    The US Department of Energy (DOE) is required by Section 3021(b) of the Resource Conservation and Recovery Act (RCRA), as amended by the Federal Facility Compliance Act (FFCAct), to prepare plans describing the development of treatment capacities and technologies for treating mixed waste. The FFCAct requires site treatment plans (STPs or plans) to be developed for each site at which DOE generates or stores mixed waste and submitted to the host state or the US Environmental Protection Agency (EPA) for either approval, approval with modification, or disapproval. The Idaho National Engineering Laboratory (INEL) Conceptual Site Treatment Plan (CSTP) is the preliminary version of the plan required by the FFCAct and is being provided to the State of Idaho, the EPA, and others for review. A list of the other DOE sites preparing CSTPs is included in Appendix A of this document. In addition to aiding the INEL in formulating its Final Proposed STP, this CSTP will also provide information to other DOE sites for use in identifying common technology needs and potential options for treating their wastes. The INEL CSTP is also intended to be used in conjunction with CSTPs from other sites as a basis for nationwide discussions among state regulators, the EPA, and other interested parties on treatment strategies and options, and on technical and equity issues associated with DOE`s mixed waste.

  9. Rotating flow

    CERN Document Server

    Childs, Peter R N

    2010-01-01

    Rotating flow is critically important across a wide range of scientific, engineering and product applications, providing design and modeling capability for diverse products such as jet engines, pumps and vacuum cleaners, as well as geophysical flows. Developed over the course of 20 years' research into rotating fluids and associated heat transfer at the University of Sussex Thermo-Fluid Mechanics Research Centre (TFMRC), Rotating Flow is an indispensable reference and resource for all those working within the gas turbine and rotating machinery industries. Traditional fluid and flow dynamics titles offer the essential background but generally include very sparse coverage of rotating flows-which is where this book comes in. Beginning with an accessible introduction to rotating flow, recognized expert Peter Childs takes you through fundamental equations, vorticity and vortices, rotating disc flow, flow around rotating cylinders and flow in rotating cavities, with an introduction to atmospheric and oceanic circul...

  10. Rotational seismology

    Science.gov (United States)

    Lee, William H K.

    2016-01-01

    Rotational seismology is an emerging study of all aspects of rotational motions induced by earthquakes, explosions, and ambient vibrations. It is of interest to several disciplines, including seismology, earthquake engineering, geodesy, and earth-based detection of Einstein’s gravitation waves.Rotational effects of seismic waves, together with rotations caused by soil–structure interaction, have been observed for centuries (e.g., rotated chimneys, monuments, and tombstones). Figure 1a shows the rotated monument to George Inglis observed after the 1897 Great Shillong earthquake. This monument had the form of an obelisk rising over 19 metres high from a 4 metre base. During the earthquake, the top part broke off and the remnant of some 6 metres rotated about 15° relative to the base. The study of rotational seismology began only recently when sensitive rotational sensors became available due to advances in aeronautical and astronomical instrumentations.

  11. Determination of tolerances in the positioning of the treatment table from an image-guided system; Determinacion de tolerancias en el posicionamiento de la mesa de tratamiento a partir de un sistema de imagen guiada

    Energy Technology Data Exchange (ETDEWEB)

    Perez Moreno, J. M.; Zucca Aparicio, D.; Fernandez leton, P.; Garcia Ruiz-Zorrilla, J.; Minanbres Moro, A.

    2011-07-01

    The use of techniques of image-guided radiotherapy (TGRT) aims to reduce the uncertainties associated with patient positioning. One of the techniques more recent development is the cone beam CT (CBCT), consisting of the acquisition of volumetric images of the patient by a detector integrated into the linear accelerator. By analyzing the results of all sessions of treatment to all patients in which the positioning has been carried out with image-guided system MV CBCT have been determined tolerance tables for translational coordinates of the table treatment based on pathology and immobilization system used. (Author)

  12. Elekta Precise Table characteristics of IGRT remote table positioning

    International Nuclear Information System (INIS)

    Riis, Hans L.; Zimmermann, Sune J.

    2009-01-01

    Cone beam CT is a powerful tool to ensure an optimum patient positioning in radiotherapy. When cone beam CT scan of a patient is acquired, scan data of the patient are compared and evaluated against a reference image set and patient position offset is calculated. Via the linac control system, the patient is moved to correct for position offset and treatment starts. This procedure requires a reliable system for movement of patient. In this work we present a new method to characterize the reproducibility, linearity and accuracy in table positioning. The method applies to all treatment tables used in radiotherapy. Material and methods. The table characteristics are investigated on our two recent Elekta Synergy Platforms equipped with Precise Table installed in a shallow pit concrete cavity. Remote positioning of the table uses the auto set-up (ASU) feature in the linac control system software Desktop Pro R6.1. The ASU is used clinically to correct for patient positioning offset calculated via cone beam CT (XVI)-software. High precision steel rulers and a USB-microscope has been used to detect the relative table position in vertical, lateral and longitudinal direction. The effect of patient is simulated by applying external load on the iBEAM table top. For each table position an image is exposed of the ruler and display values of actual table position in the linac control system is read out. The table is moved in full range in lateral direction (50 cm) and longitudinal direction (100 cm) while in vertical direction a limited range is used (40 cm). Results and discussion. Our results show a linear relation between linac control system read out and measured position. Effects of imperfect calibration are seen. A reproducibility within a standard deviation of 0.22 mm in lateral and longitudinal directions while within 0.43 mm in vertical direction has been observed. The usage of XVI requires knowledge of the characteristics of remote table positioning. It is our opinion

  13. Aloe vera extract as a promising treatment for the quality maintenance of minimally-processed table grapes

    Directory of Open Access Journals (Sweden)

    Giuseppina Rosaria Antonella Alberio

    2015-06-01

    Full Text Available The effect of an edible film obtained from a commercial Aloe vera extract, on the quality maintenance of minimally processed grapes belonging to three different cultivars (Sugar One, Victoria and Black Magic was evaluated by enzymatic (PPO, PME, β-GAL, physicochemical (pH, acidity, °Brix, and sensorial methods. All the analyzed parameters were measured in extracts obtained from minimally processed grapes packaged in ordinary atmosphere and stored at 4 °C for 15 days. Samples dipped into Aloe vera showed significant differences (p≤0.05 compared to untreated ones. The determination of such parameters and the evaluation of consumer acceptability were helpful to determine the effectiveness of the post-harvest treatment with Aloe vera for a storage period of 15 days.

  14. SU-C-19A-06: A Robust and Affordable Table Indexing Approach for Total Lymphoid Irradiation Treatment

    Energy Technology Data Exchange (ETDEWEB)

    Yu, S; Fahimian, B; Kenyon, M; Hsu, A [Stanford University, Stanford, CA (United States)

    2014-06-15

    Purpose: Total lymphoid irradiation (TLI) is conventionally delivered through the dosimetric matching of mantle, spleen, and pelvis fields, necessitating multiple isocenters delivered through a combination of couch shifts and sliding of patients relative to the couch rendering the technique susceptible to shifting errors. To address this challenge, a novel technique for the couch indexing of TLI treatments is developed and evaluated through a multi-patient pilot trial. Methods: An immobilization device was designed consisting of a movable indexed slide board with an Exact Lok-Bar drilled into it. A Timo headrests were used fixate the head of the patient relative to the slide board. For the Varian Exact Couch™, the immobilization board was connected to the H3 notch to avoid the metal infrastructure of the couch for the delivery of the mantle and spleen fields. For tall patients the required shift for the pelvis isocenter reaches the shifting limit and the board was slid from H3 to H4 (a fixed distance of 14 cm). A total 22 patients were stratified in two groups of 11, one consisting of the conventional setup, and one group with the proposed immobilization technique. Results: The standard deviations (SD) of the couch positions in lateral, longitudinal, and vertical directions for 10 fractions for each patient in both groups were calculated. In the non-indexed group, the positioning SD ranged from 0.9 to 4.7 cm. Using our device, the positioning SD was reduced to a range of 0.2 to 0.9 cm, with the longitudinal direction showing the largest improvement. Conclusion: Matched field TLI remains error prone to geometrical misses. The feasibility of full indexing TLI treatments was validated and shown to result in a significant reduction of positioning errors.

  15. Effects of high- and low-energy radial shock waves therapy combined with physiotherapy in the treatment of rotator cuff tendinopathy: a retrospective study.

    Science.gov (United States)

    Su, Xiangzheng; Li, Zhongli; Liu, Zhengsheng; Shi, Teng; Xue, Chao

    2017-06-09

    The aim of this study was to investigate the efficacy of high- and low-energy radial shock waves combined with physiotherapy for rotator cuff tendinopathy patients. Data from rotator cuff tendinopathy patients received high- or low-energy radial shock waves combined with physiotherapy or physiotherapy alone were collected. The Constant and Murley score and visual analog scale score were collected to assess the effectiveness of treatment in three groups at 4, 8, 12, and 24 weeks. In total, 94 patients were involved for our retrospective study. All groups showed remarkable improvement in the visual analog scale and Constant and Murley score compared to baseline at 24 weeks. The high-energy radial shock waves group had more marked improvement in the Constant and Murley score compared to the physiotherapy group at 4 and 8 weeks and at 4 weeks when compared with low-energy group. Furthermore, high-energy radial shock waves group had superior results on the visual analog scale at 4, 8, and 12 weeks compared to low-energy and physiotherapy groups. This retrospective study supported the usage of high-energy radial shock waves as a supplementary therapy over physiotherapy alone for rotator cuff tendinopathy by relieving the symptoms rapidly and maintaining symptoms at a satisfactory level for 24 weeks. Implications for Rehabilitation High-energy radial shock waves can be a supplemental therapy to physiotherapy for rotator cuff tendinopathy. We recommend the usage of high-energy radial shock waves during the first 5 weeks, at an interval of 7 days, of physiotherapy treatment. High-energy radial shock waves treatment combined with physiotherapy can benefit rotator cuff tendinopathy by relieving symptoms rapidly and maintain these improvements at a satisfactory level for quite a long time.

  16. Global rotation

    International Nuclear Information System (INIS)

    Rosquist, K.

    1980-01-01

    Global rotation in cosmological models is defined on an observational basis. A theorem is proved saying that, for rigid motion, the global rotation is equal to the ordinary local vorticity. The global rotation is calculated in the space-time homogeneous class III models, with Godel's model as a special case. It is shown that, with the exception of Godel's model, the rotation in these models becomes infinite for finite affine parameter values. In some directions the rotation changes sign and becomes infinite in a direction opposite to the local vorticity. The points of infinite rotation are identified as conjugate points along the null geodesics. The physical interpretation of the infinite rotation is discussed, and a comparison with the behaviour of the area distance at conjugate points is given. (author)

  17. Qualification of the calculational methods of the fluence in the pressurised water reactors. Improvement of the cross sections treatment by the probability table method; Qualification des methodes de calculs de fluence dans les reacteurs a eau pressurisee. Amelioration du traitement des sections efficaces par la methode des tables de probabilite

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, S H

    1994-01-01

    It is indispensable to know the fluence on the nuclear reactor pressure vessel. The cross sections and their treatment have an important rule to this problem. In this study, two ``benchmarks`` have been interpreted by the Monte Carlo transport program TRIPOLI to qualify the calculational method and the cross sections used in the calculations. For the treatment of the cross sections, the multigroup method is usually used but it exists some problems such as the difficulty to choose the weighting function and the necessity of a great number of energy to represent well the cross section`s fluctuation. In this thesis, we propose a new method called ``Probability Table Method`` to treat the neutron cross sections. For the qualification, a program of the simulation of neutron transport by the Monte Carlo method in one dimension has been written; the comparison of multigroup`s results and probability table`s results shows the advantages of this new method. The probability table has also been introduced in the TRIPOLI program; the calculational results of the iron deep penetration benchmark has been improved by comparing with the experimental results. So it is interest to use this new method in the shielding and neutronic calculation. (author). 42 refs., 109 figs., 36 tabs.

  18. SU-E-T-312: Dosimetric Consideration for the Agility MLC When Planning Rotational SRT/SBRT Treatments

    Energy Technology Data Exchange (ETDEWEB)

    Kong, X; Harris, J; Spitznagel, D; Walker, J [Avera Medical Group - Radiation Oncology, Sioux Falls, SD (United States)

    2015-06-15

    Purpose: To analyze the radiation transmission of the Agility MLC and make recommendation based on the MLC dosimetric characteristics for SRT, SBRT and VMAT planning Method and Materials: Agility MLC is the newest model from Elekta and has no back up diaphragm behind leaves for this generation. Leaves are single focused with rounded end; composed of leafs each 0.5cm wide, 9cm thick, constructed from tungsten alloy and provide low transmission <0.5%. Total radiation transmission from leaves and diaphragm is <0.13%. A 360degree arc was generated using iCom tools; leaves were programmed closed while keeping the diaphragm fully open to maximize the MLC transmission effect. Gafchromic EBT films were sandwiched between 4cm of solid water and situated at midplane to take dose measurement. 5000MU was delivered using 6MV VersaHD, various collimator angles, and a 5cm central axis offset was tested also. Films were scanned with Epson 10000XL scanner and analyzed using DoseLab Pro. Results: Due to the rounded leaf end and nature of rotation therapy, dose accumulation through the leaf gap is significant. By offsetting the leaf gap from central axis, this accumulation can be greatly reduced. There are dark bands showing accumulation of interleaf transmission which is improved by increasing collimator angle from 0 to 45dgree. However for 45 degree, in most cases, there are larger volumes sweeping under MLC alone, which needs considered planning. Conclusions: While inter-leaf leakage is minimized by using collimator angles greater than 0 degrees, the location of the leaf gap must also be managed. The leaf gap position becomes critically important when the treatment area is off axis such is the case when more than one PTV is being treated. With VMAT for SRT, SBRT becoming a more popular planning technique, special attention needs to be paid when initially setting up the field geometry.

  19. Resultados do tratamento artroscópico das rupturas do manguito rotador Outcomes of arthroscopic treatment for rotator cuff tears

    Directory of Open Access Journals (Sweden)

    Carlos Henrique Ramos

    2010-01-01

    Full Text Available OBJETIVO: Analisar os resultados do reparo artroscópico das rupturas do manguito rotador. MÉTODOS: Realizado estudo retrospectivo com avaliação dos resultados da técnica em 42 pacientes operados entre 2002 e 2006. O seguimento médio foi de 31 meses e a média de idade foi de 57 anos, sendo o lado dominante operado em 73,8% dos casos. Para avaliação foram usadas escalas de UCLA e Escala Visual Analógica da dor no pós-operatório. RESULTADOS: Os resultados foram satisfatórios em 85,7% (59,5% excelentes e 26,2% bons respectivamente e insatisfatórios em 14,3% dos pacientes. Nos casos com lesões associadas, a mais frequente foi no tendão da porção longa do bíceps (57,1%. Associação com outras lesões não comprometeu o resultado. O mesmo aconteceu com relação a idade e tempo de acompanhamento pós-cirurgia. Quanto ao tamanho da lesão, diferença significativa ocorreu nos casos de lesões grandes e maciças demonstrando resultados inferiores em relação às pequenas e médias. A função foi inferior principalmente nos casos de lesão maciça. CONCLUSÃO: A reparação artroscópica das lesões do manguito rotador (MR proporciona baixa morbidade cirúrgica e possibilita diagnóstico de lesões articulares associadas. O benefício do procedimento foi confirmado principalmente pela melhora significativa da dor, mesmo nos casos de lesões maiores.OBJECTIVE: To evaluate the results of arthroscopic treatment for rotator cuff tears. METHODS: A retrospective study was carried out demonstrating the results of this technique in 42 patients operated between 2002 and 2006. The mean follow-up was 31 months and average age was 57 years. The dominant limb was operated in 73.8% of cases. Function and pain were evaluated using criteria of UCLA Score System and Visual Analogic Scale respectively. RESULTS: The results were satisfactory in 85.7% (59.5% excellent and 26.2% good, with 14.3% unsatisfactory. The most frequent associated lesion was the

  20. Percutaneous transluminal rotational atherectomy in the treatment of peripheral vascular disease using a transluminal endatherectomy catheter (TEC): Initial results and angiographic follow-up

    International Nuclear Information System (INIS)

    Rilinger, Norbert; Goerich, Johannes; Scharrer-Pamler, Reinhard; Vogel, Jochen; Tomczak, Reinhard; Merkle, Elmar; Sokiranski, Roman; Brambs, Hans-Juergen

    1997-01-01

    Purpose. To evaluate the clinical results of percutaneous transluminal rotational atherectomy in the treatment of peripheral vascular disease. Methods. Rotational atherectomy was performed in 39 patients aged 39-87 years (mean 66.6 years). A total of 71 lesions (43 stenoses and 28 occlusions) were treated in 40 limbs. Additional balloon angioplasty was required in 54% of lesions. Fifteen patients (37.5%) presented in Fontaine stage II, 10 patients (25%) in Fontaine stage III and 15 patients (37.5%) in Fontaine stage IV. Rotational atherectomy at 750 rpm was carried out over a 0.014-inch guidewire with continuous aspiration into a vacuum, bottle. Follow-up angiography and color flow Doppler examinations were performed in 22 patients (23 limbs) after a mean period of 6 months (range 2-14 months). Results. There was one primary technical failure. In 36 of 40 lesions there was a good angiographic result with residual stenoses in less than 30%. In 70 lesions treated by rotational atherectomy, however, 54% showed residual stenoses of 30%-50% and these cases required additional balloon angioplasty. The mean ankle-brachial index improved significantly (p<0.001), from 0.49 before the procedure to 1.01 after the procedure. A single distal embolus, related to primary recanalization, occurred and there were two large inguinal hematomas. Cumulative clinical patency after 6 months was 83.8% and cumulative angiographic patency after 6 months was 79.1%. Conclusion. Percutaneous rotational atherectomy is a promising approach for the treatment of chronic peripheral vascular disease. Further prospective, randomized studies are necessary to compare percutaneous transluminal angioplasty with this new technical approach

  1. NNDSS - Table III. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table III. Tuberculosis - 2018.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  2. Pension Insurance Data Tables

    Data.gov (United States)

    Pension Benefit Guaranty Corporation — Find out about retirement trends in PBGC's data tables. The tables include statistics on the people and pensions that PBGC protects, including how many Americans are...

  3. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2016.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  4. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2014.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  5. NNDSS - Table II. Vibriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Vibriosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year), and selected...

  6. NNDSS - Table III. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table III. Tuberculosis - 2017.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  7. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2015.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  8. NNDSS - Table II. Vibriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Vibriosis - 2018. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year), and selected...

  9. Tabled Execution in Scheme

    Energy Technology Data Exchange (ETDEWEB)

    Willcock, J J; Lumsdaine, A; Quinlan, D J

    2008-08-19

    Tabled execution is a generalization of memorization developed by the logic programming community. It not only saves results from tabled predicates, but also stores the set of currently active calls to them; tabled execution can thus provide meaningful semantics for programs that seemingly contain infinite recursions with the same arguments. In logic programming, tabled execution is used for many purposes, both for improving the efficiency of programs, and making tasks simpler and more direct to express than with normal logic programs. However, tabled execution is only infrequently applied in mainstream functional languages such as Scheme. We demonstrate an elegant implementation of tabled execution in Scheme, using a mix of continuation-passing style and mutable data. We also show the use of tabled execution in Scheme for a problem in formal language and automata theory, demonstrating that tabled execution can be a valuable tool for Scheme users.

  10. Are intra-articular corticosteroid injections better than conventional TENS in treatment of rotator cuff tendinitis in the short run? A randomized study.

    Science.gov (United States)

    Eyigor, C; Eyigor, S; Kivilcim Korkmaz, O

    2010-09-01

    Rotator cuff problems are common causes of pain and restriction of movement in shoulder. The aim of this study to compare the effect of intra-articular injection of corticosteroid and conventional transcutaneous electrical nerve stimulator (TENS) treatment in treatment of rotator cuff tendinitis. Subjects were randomly allocated into Group 1 (intra-articular injection of corticosteroid) and Group 2 (conventional transcutaneous electrical nerve stimulation-TENS). Outcome measurements were performed using the Visual Analogue Scale (VAS) for pain, range of motion (ROM), the Shoulder Disability Questionnaire (SDQ), the Short Form-36 (SF-36), and Beck Depression Scale (BDS) questionnaires and paracetamol consumption. In both groups, significant improvement was observed in all weeks in VAS, ROM and SDQ scores (P0.05). In both treatment groups, paracetamol consumption decreased in time (Protator cuff tendinitis. When two treatments are compared, it may be concluded that intra-articular steroid injection was more effective especially in the first weeks regarding pain, ROM and disability. Otherwise, use of TENS allow to patients to increase activity level, improve function and quality of life like that in our study. TENS, as it is cheaper, non-invasive, more easily performed and efficient, may be preferable for the treatment of shoulder pain. Further studies are needed to include these results in the prospective treatment guidelines.

  11. Surface ablation with iris recognition and dynamic rotational eye tracking-based tissue saving treatment with the Technolas 217z excimer laser.

    Science.gov (United States)

    Prakash, Gaurav; Agarwal, Amar; Kumar, Dhivya Ashok; Jacob, Soosan; Agarwal, Athiya; Maity, Amrita

    2011-03-01

    To evaluate the visual and refractive outcomes and expected benefits of Tissue Saving Treatment algorithm-guided surface ablation with iris recognition and dynamic rotational eye tracking. This prospective, interventional case series comprised 122 eyes (70 patients). Pre- and postoperative assessment included uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), refraction, and higher order aberrations. All patients underwent Tissue Saving Treatment algorithm-guided surface ablation with iris recognition and dynamic rotational eye tracking using the Technolas 217z 100-Hz excimer platform (Technolas Perfect Vision GmbH). Follow-up was performed up to 6 months postoperatively. Theoretical benefit analysis was performed to evaluate the algorithm's outcomes compared to others. Preoperative spherocylindrical power was sphere -3.62 ± 1.60 diopters (D) (range: 0 to -6.75 D), cylinder -1.15 ± 1.00 D (range: 0 to -3.50 D), and spherical equivalent -4.19 ± 1.60 D (range: -7.75 to -2.00 D). At 6 months, 91% (111/122) of eyes were within ± 0.50 D of attempted correction. Postoperative UDVA was comparable to preoperative CDVA at 1 month (P=.47) and progressively improved at 6 months (P=.004). Two eyes lost one line of CDVA at 6 months. Theoretical benefit analysis revealed that of 101 eyes with astigmatism, 29 would have had cyclotorsion-induced astigmatism of ≥ 10% if iris recognition and dynamic rotational eye tracking were not used. Furthermore, the mean percentage decrease in maximum depth of ablation by using the Tissue Saving Treatment was 11.8 ± 2.9% over Aspheric, 17.8 ± 6.2% over Personalized, and 18.2 ± 2.8% over Planoscan algorithms. Tissue saving surface ablation with iris recognition and dynamic rotational eye tracking was safe and effective in this series of eyes. Copyright 2011, SLACK Incorporated.

  12. AcuTable

    DEFF Research Database (Denmark)

    Dibbern, Simon; Rasmussen, Kasper Vestergaard; Ortiz-Arroyo, Daniel

    2017-01-01

    In this paper we describe AcuTable, a new tangible user interface. AcuTable is a shapeable surface that employs capacitive touch sensors. The goal of AcuTable was to enable the exploration of the capabilities of such haptic interface and its applications. We describe its design and implementation...

  13. Table Tennis Club

    CERN Multimedia

    Table Tennis Club

    2013-01-01

    Apparently table tennis plays an important role in physics, not so much because physicists are interested in the theory of table tennis ball scattering, but probably because it provides useful breaks from their deep intellectual occupation. It seems that many of the greatest physicists took table tennis very seriously. For instance, Heisenberg could not even bear to lose a game of table tennis, Otto Frisch played a lot of table tennis, and had a table set up in his library, and Niels Bohr apparently beat everybody at table tennis. Therefore, as the CERN Table Tennis Club advertises on a poster for the next CERN Table Tennis Tournament: “if you want to be a great physicist, perhaps you should play table tennis”. Outdoor table at restaurant n° 1 For this reason, and also as part of the campaign launched by the CERN medical service “Move! & Eat better”, to encourage everyone at CERN to take regular exercise, the CERN Table Tennis Club, with the supp...

  14. Periodic Table of Students.

    Science.gov (United States)

    Johnson, Mike

    1998-01-01

    Presents an exercise in which an eighth-grade science teacher decorated the classroom with a periodic table of students. Student photographs were arranged according to similarities into vertical columns. Students were each assigned an atomic number according to their placement in the table. The table is then used to teach students about…

  15. Efficacy of hyaluronic acid or steroid injections for the treatment of a rat model of rotator cuff injury.

    Science.gov (United States)

    Yamaguchi, Takeshi; Ochiai, Nobuyasu; Sasaki, Yu; Kijima, Takehiro; Hashimoto, Eiko; Sasaki, Yasuhito; Kenmoku, Tomonori; Yamazaki, Hironori; Miyagi, Masayuki; Ohtori, Seiji; Takahashi, Kazuhisa

    2015-12-01

    This study evaluated dorsal root ganglia from C3-C7, analyzed gait, and compared the expression of calcitonin gene-related peptide (CGRP) which was a marker of inflammatory pain in a rat rotator cuff tear model in which the supraspinatus and infraspinatus tendons were detached; comparisons were made to a sham group in which only the tendons were exposed. Fluorogold was injected into the glenohumeral joint 21 days after surgery in both groups, and saline, steroids, or hyaluronic acid was injected into the glenohumeral joint in the rotator cuff tear group 26 days after surgery. The proportions of CGRP-immunoreactive neurons were higher and the gait parameters were impaired in the rotator cuff tear group compared to in the sham group. However, the CGRP expression was reduced and the gait was improved with steroid or hyaluronic acid injection compared to saline, suggesting that both hyaluronic acid and steroid injections suppressed of inflammation which thought to be provided pain relief. While there were no significant differences, the suppression of CGRP expression and the improved gait after hyaluronic acid and steroid injections suggested that both methods were effective for rat rotator cuff tear model. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  16. Competency of Psychiatric Residents in the Treatment of People with Severe Mental Illness before and after a Community Psychiatry Rotation

    Science.gov (United States)

    Randall, Melinda; Romero-Gonzalez, Mauricio; Gonzalez, Gerardo; Klee, Anne; Kirwin, Paul

    2011-01-01

    Objective: Psychiatric rehabilitation is an evidence-based service with the goal of recovery for people with severe mental illness. Psychiatric residents should understand the services and learn the principles of psychiatric rehabilitation. This study assessed whether a 3-month rotation in a psychiatric rehabilitation center changes the competency…

  17. Rotating Wavepackets

    Science.gov (United States)

    Lekner, John

    2008-01-01

    Any free-particle wavepacket solution of Schrodinger's equation can be converted by differentiations to wavepackets rotating about the original direction of motion. The angular momentum component along the motion associated with this rotation is an integral multiple of [h-bar]. It is an "intrinsic" angular momentum: independent of origin and…

  18. Rotating dryer

    International Nuclear Information System (INIS)

    Noe, C.

    1984-01-01

    Products to dry are introduced inside a rotating tube placed in an oven, the cross section of the tube is an arc of spiral. During clockwise rotation of the tube products are maintained inside and mixed, during anticlockwise products are removed. Application is made to drying of radioactive wastes [fr

  19. Exercise therapy for treatment of supraspinatus tears does not alter glenohumeral kinematics during internal/external rotation with the arm at the side.

    Science.gov (United States)

    Ferrer, Gerald A; Miller, R Matthew; Zlotnicki, Jason P; Tashman, Scott; Irrgang, James J; Musahl, Volker; Debski, Richard E

    2018-01-01

    Rotator cuff tears are a significant clinical problem, with exercise therapy being a common treatment option for patients. Failure rates of exercise therapy may be due to the failure to improve glenohumeral kinematics. Tears involving the supraspinatus may result in altered glenohumeral kinematics and joint instability for internal/external rotation with the arm at the side because not all muscles used to stabilize the glenohumeral joint are functioning normally. The objective of the study is to assess in vivo glenohumeral kinematic changes for internal/external rotation motions with the arm at the side of patients with a symptomatic full-thickness supraspinatus tear before and after a 12-week exercise therapy programme. Five patients underwent dynamic stereoradiography analysis before and after a 12-week exercise therapy protocol to measure changes in glenohumeral kinematics during transverse plane internal/external rotation with the arm at the side. Patient-reported outcomes and shoulder strength were also evaluated. No patient sought surgery immediately following exercise therapy. Significant improvements in isometric shoulder strength and patient-reported outcomes were observed (p internal/external rotation with the arm at the side. Despite satisfactory clinical outcomes following exercise therapy, glenohumeral kinematics did not change. The lack of changes may be due to the motion studied or the focus of current exercise therapy protocols being increasing shoulder strength and restoring range of motion. Current exercise therapy protocols should be adapted to also focus on restoring glenohumeral kinematics to improve joint stability since exercise therapy may have different effects depending on the motions of daily living. Prognostic study, Level II.

  20. Mortality table construction

    Science.gov (United States)

    Sutawanir

    2015-12-01

    Mortality tables play important role in actuarial studies such as life annuities, premium determination, premium reserve, valuation pension plan, pension funding. Some known mortality tables are CSO mortality table, Indonesian Mortality Table, Bowers mortality table, Japan Mortality table. For actuary applications some tables are constructed with different environment such as single decrement, double decrement, and multiple decrement. There exist two approaches in mortality table construction : mathematics approach and statistical approach. Distribution model and estimation theory are the statistical concepts that are used in mortality table construction. This article aims to discuss the statistical approach in mortality table construction. The distributional assumptions are uniform death distribution (UDD) and constant force (exponential). Moment estimation and maximum likelihood are used to estimate the mortality parameter. Moment estimation methods are easier to manipulate compared to maximum likelihood estimation (mle). However, the complete mortality data are not used in moment estimation method. Maximum likelihood exploited all available information in mortality estimation. Some mle equations are complicated and solved using numerical methods. The article focus on single decrement estimation using moment and maximum likelihood estimation. Some extension to double decrement will introduced. Simple dataset will be used to illustrated the mortality estimation, and mortality table.

  1. CERN Table Tennis Club

    CERN Multimedia

    CERN Table Tennis Club

    2014-01-01

    CERN Table Tennis Club Announcing CERN 60th Anniversary Table Tennis Tournament to take place at CERN, from July 1 to July 15, 2014   The CERN Table Tennis Club, reborn in 2008, is encouraging people at CERN to take more regular exercise. This is why the Club, thanks to the strong support of the CERN Staff Association, installed last season a first outdoor table on the terrace of restaurant # 1, and will install another one this season on the terrace of Restaurant # 2. Table tennis provides both physical exercise and friendly social interactions. The CERN Table Tennis club is happy to use the unique opportunity of the 60th CERN anniversary to promote table tennis at CERN, as it is a game that everybody can easily play, regardless of level. Table tennis is particularly well suited for CERN, as many great physicists play table tennis, as you might already know: “Heisenberg could not even bear to lose a game of table tennis”; “Otto Frisch played a lot of table tennis;...

  2. [Missed diagnosis of hiding posterior marginal fracture of ankle with pronation-external rotation type and its treatment].

    Science.gov (United States)

    Wang, Jia; Zhang, Yun-Tong; Zhang, Chun-Cai; Tang, Yang

    2014-01-01

    To analyze causes of missed diagnosis of hiding post-malleolar fractures in treating ankle joint fractures of pronation-external rotation type according to Lauge-Hansen classification and assess its medium-term outcomes. Among 103 patients with ankle joint fracture of pronation-external rotation type treated from March 2002 to June 2010,9 patients were missed diagnosis,including 6 males and 3 females,with a mean age of 35.2 years old (ranged, 18 to 55 years old) . Four patients were diagnosed during operation, 2 patients were diagnosed 2 or 3 days after first surgery and 3 patients came from other hospital. All the patients were treated remedially with lag screws and lock plates internal fixation. After operation,ankle joint function was evaluated according to American Orthopaedic Foot and Ankle Society (AOFAS). All the 9 patients were followed up, and the duration ranged from 14 to 30 months (averaged, 17 months). No incision infection was found, and all incision healed at the first stage. At the latest follow-up, AOFAS was 83.0 +/- 4.4, the score of 4 patients diagnosed during operation was 85.0 +/- 2.9, and the score of 5 patients treated by secondary operation was 81.0 +/- 5.3. All the patients got fracture union observed by X-ray at a mean time of 2.2 months after operation. There were no complications such as internal fixation loosing, broken and vascular or nerve injuries. Ankle joint fracture of pronation-external rotation type may be combined with hiding post-malleolar fractures. So to patients with ankle joint fracture of pronation-external rotation type, lateral X-ray should be read carefully, and if necessary, CT or MRI examination should be performed. If adding lateral X-ray examination after reduction of exterior and interior ankle joint fixation, the missed diagnosis may be avoided.

  3. VizieR Online Data Catalog: Compilation of stellar rotation data (Kovacs, 2018)

    Science.gov (United States)

    Kovacs, G.

    2018-03-01

    The three datasets included in table1-1.dat, table1-2.dat and table1-6.dat respectively, correspond to the type of stars listed in Table 1 in lines 1 [Praesepe], 2 [HJ_host] and 6 [Field(C)]. These data result from the compilation of rotational and other stellar data from the literature. (4 data files).

  4. TABLE TENNIS CLUB

    CERN Document Server

    TABLE TENNIS CLUB

    2010-01-01

    2010 CERN Table Tennis Tournament The CERN Table Tennis Club organizes its traditional CERN Table Tennis Tournament, at the Meyrin club, 2 rue de livron, in Meyrin, Saturday August 21st, in the afternoon. The tournament is open to all CERN staff, users, visitors and families, including of course summer students. See below for details. In order to register, simply send an E-mail to Jean-Pierre Revol (jean-pierre.revol@cern.ch). You can also download the registration form from the Club Web page (http://www.cern.ch/tabletennis), and send it via internal mail. Photo taken on August 22, 2009 showing some of the participants in the 2nd CERN Table Tennis tournament. INFORMATION ON CERN TABLE TENNIS CLUB CERN used to have a tradition of table tennis activities at CERN. For some reason, at the beginning of the 1980’s, the CERN Table Tennis club merged with the Meyrin Table Tennis club, a member of the Association Genevoise de Tennis de Table (AGTT). Therefore, if you want to practice table tennis, you...

  5. Standard Reference Tables -

    Data.gov (United States)

    Department of Transportation — The Standard Reference Tables (SRT) provide consistent reference data for the various applications that support Flight Standards Service (AFS) business processes and...

  6. The Periodic Round Table (by Gary Katz)

    Science.gov (United States)

    Rodgers, Reviewed By Glen E.

    2000-02-01

    Unwrapping and lifting the Periodic Round Table out of its colorful box is an exciting experience for a professional chemist or a chemistry student. Touted as a "new way of looking at the elements", it is certainly thatat least at first blush. The "table" consists of four sets of two finely finished hardwood discs each with the following elemental symbols and their corresponding atomic numbers pleasingly and symmetrically wood-burned into their faces. The four sets of two discs are 1 1/2, 3, 4 1/2, and 6 in. in diameter, each disc is 3/4 in. thick, and therefore the entire "round table" stands 6 in. high and is 6 in. in diameter at its base. The eight beautifully polished discs (represented below) are held together by center dowels that allow each to be rotated separately.

  7. Setting Places at the Table

    Directory of Open Access Journals (Sweden)

    James R. Briscoe

    2016-12-01

    Full Text Available A recent survey by the National Endowment for the Arts found that only 2% of Americans listen to “Classical” music with regularity, and fewer practice or play art or historic music even once in a year. The rotating kaleidoscope of new technologies, repertories, interpretation, and cultural values can become not an ultimate bewilderment, a nail in the coffin of art and historic music, but a powerful tool for revitalizing how it engages persons of all age groups and how it can broaden its understanding. The table of musical places we set can respond to the narrative we carefully conceive for any condition at hand, for the student or scholar or layperson we address, for an intentional kaleidoscope of presentations. Such an attitude might let the other 98% discover art and historic music and see their lives mirrored and bettered.

  8. Influence of Tool Rotational Speed and Post-Weld Heat Treatments on Friction Stir Welded Reduced Activation Ferritic-Martensitic Steel

    Science.gov (United States)

    Manugula, Vijaya L.; Rajulapati, Koteswararao V.; Reddy, G. Madhusudhan; Mythili, R.; Bhanu Sankara Rao, K.

    2017-08-01

    The effects of tool rotational speed (200 and 700 rpm) on evolving microstructure during friction stir welding (FSW) of a reduced activation ferritic-martensitic steel (RAFMS) in the stir zone (SZ), thermo-mechanically affected zone (TMAZ), and heat-affected zone (HAZ) have been explored in detail. The influence of post-weld direct tempering (PWDT: 1033 K (760 °C)/ 90 minutes + air cooling) and post-weld normalizing and tempering (PWNT: 1253 K (980 °C)/30 minutes + air cooling + tempering 1033 K (760 °C)/90 minutes + air cooling) treatments on microstructure and mechanical properties has also been assessed. The base metal (BM) microstructure was tempered martensite comprising Cr-rich M23C6 on prior austenite grain and lath boundaries with intra-lath precipitation of V- and Ta-rich MC precipitates. The tool rotational speed exerted profound influence on evolving microstructure in SZ, TMAZ, and HAZ in the as-welded and post-weld heat-treated states. Very high proportion of prior austenitic grains and martensite lath boundaries in SZ and TMAZ in the as-welded state showed lack of strengthening precipitates, though very high hardness was recorded in SZ irrespective of the tool speed. Very fine-needle-like Fe3C precipitates were found at both the rotational speeds in SZ. The Fe3C was dissolved and fresh precipitation of strengthening precipitates occurred on both prior austenite grain and sub-grain boundaries in SZ during PWNT and PWDT. The post-weld direct tempering caused coarsening and coalescence of strengthening precipitates, in both matrix and grain boundary regions of TMAZ and HAZ, which led to inhomogeneous distribution of hardness across the weld joint. The PWNT heat treatment has shown fresh precipitation of M23C6 on lath and grain boundaries and very fine V-rich MC precipitates in the intragranular regions, which is very much similar to that prevailed in BM prior to FSW. Both the PWDT and PWNT treatments caused considerable reduction in the hardness of SZ

  9. The Living Periodic Table

    Science.gov (United States)

    Nahlik, Mary Schrodt

    2005-01-01

    To help make the abstract world of chemistry more concrete eighth-grade students, the author has them create a living periodic table that can be displayed in the classroom or hallway. This display includes information about the elements arranged in the traditional periodic table format, but also includes visual real-world representations of the…

  10. Rotating preventers

    International Nuclear Information System (INIS)

    Tangedahl, M.J.; Stone, C.R.

    1992-01-01

    This paper reports that recent changes in the oil and gas industry and ongoing developments in horizontal and underbalanced drilling necessitated development of a better rotating head. A new device called the rotating blowout preventer (RBOP) was developed by Seal-Tech. It is designed to replace the conventional rotating control head on top of BOP stacks and allows drilling operations to continue even on live (underbalanced) wells. Its low wear characteristics and high working pressure (1,500 psi) allow drilling rig crews to drill safely in slightly underbalanced conditions or handle severe well control problems during the time required to actuate other BOPs in the stack. Drilling with a RBOP allows wellbores to be completely closed in tat the drill floor rather than open as with conventional BOPs

  11. Design and testing of a rotating, cooled device for extra-corporate treatment of liver cancer by BNCT in the epithermal neutron beam at the HFR Petten

    International Nuclear Information System (INIS)

    Moss, Ray; Nievaart, Sander; Pott, Lucien; Wittig, Andrea; Sauerwein, Wolfgang

    2006-01-01

    As part of the joint project on extra-corporal treatment of liver cancer by BNCT between JRC Petten and the University Hospital Essen, a facility has been designed and built to contain the liver during its irradiation treatment at the HFR Petten. The design consists of a rotating spheroid shaped PMMA holder, manufactured to open at the equator and closed by screwing together, surrounded by PMMA and graphite blocks. A validation exercise has been performed regarding both the nuclear conditions and the physical conditions. For the former, activation foil sets of Au, Cu and Mn, were irradiated at positions inside the liver holder filled with water, whilst a second measurement campaign has been performed using gel dosimetry. For the physical test, it is required to operate (rotate) the facility for up to 4 hours and to maintain the liver at approximately 4degC. The latter test was performed using 'cold gun sprays' that inject cold air near the liver holder. Both the nuclear and physical validation tests were performed successfully. (author)

  12. Treatment of Medial Malleolus or Pure Deltoid Ligament Injury in Patients with Supination-External Rotation Type IV Ankle Fractures.

    Science.gov (United States)

    Wang, Xu; Zhang, Chao; Yin, Jian-Wen; Wang, Chen; Huang, Jia-Zhang; Ma, Xin; Wang, Cheng-Wei; Wang, Xue

    2017-02-01

    To investigate the effect of internal fixation on postoperative ankle function in patients with supination-external rotation type IV ankle fractures, including medial malleolus fractures and deltoid ligament injury. Between January 2012 and June 2014, patients with medial structure injuries were enrolled in this study and assigned to the medial malleolus fracture group or the deltoid ligament group. The surgical procedures for the two groups were documented. The follow-up endpoint was the time point when the steel plate or screw was removed from the lateral ankle. The Olerud-Molander ankle scoring system was used to assess ankle function. A total of 84 patients with supination-external rotation type IV ankle fractures had complete medical records and were included in this study. The average age of the patients was 44.16 years (range, 15-75). The patient sample included 39 males and 45 females. Overall, 49 patients (19 males and 30 females) suffered a medial malleolus fracture. The average age of these patients was 40.20 years (range, 15-75). Patients with a posterior malleolar fracture fragment >25% of the articular surface accounted for 81.6% (40 patients) of these patients. Overall, 35 patients (20 males and 15 females) experienced a deltoid ligament injury. The average age of these patients was 44.21 years (range, 17-73). Patients with a posterior malleolar fracture fragment >25% of the articular surface accounted for 11.5% (four patients) of these patients. Open reduction was performed in patients with medial malleolus fractures, and two 4.0-mm cannulated screws were used to fixate the posterior malleolus and the medial malleolus. The suture-anchor technique was used to repair the ligaments in patients with deltoid ligament injuries. The follow-up endpoint was the time point when the steel plate and screws were removed from the lateral ankle in patients. The average follow-up period was 13.4 months (range, 11-17). The Olerud-Molander ankle scoring system was

  13. Earth Rotation

    Science.gov (United States)

    Dickey, Jean O.

    1995-01-01

    The study of the Earth's rotation in space (encompassing Universal Time (UT1), length of day, polar motion, and the phenomena of precession and nutation) addresses the complex nature of Earth orientation changes, the mechanisms of excitation of these changes and their geophysical implications in a broad variety of areas. In the absence of internal sources of energy or interactions with astronomical objects, the Earth would move as a rigid body with its various parts (the crust, mantle, inner and outer cores, atmosphere and oceans) rotating together at a constant fixed rate. In reality, the world is considerably more complicated, as is schematically illustrated. The rotation rate of the Earth's crust is not constant, but exhibits complicated fluctuations in speed amounting to several parts in 10(exp 8) [corresponding to a variation of several milliseconds (ms) in the Length Of the Day (LOD) and about one part in 10(exp 6) in the orientation of the rotation axis relative to the solid Earth's axis of figure (polar motion). These changes occur over a broad spectrum of time scales, ranging from hours to centuries and longer, reflecting the fact that they are produced by a wide variety of geophysical and astronomical processes. Geodetic observations of Earth rotation changes thus provide insights into the geophysical processes illustrated, which are often difficult to obtain by other means. In addition, these measurements are required for engineering purposes. Theoretical studies of Earth rotation variations are based on the application of Euler's dynamical equations to the problem of finding the response of slightly deformable solid Earth to variety of surface and internal stresses.

  14. A self-managed single exercise programme versus usual physiotherapy treatment for rotator cuff tendinopathy: a randomised controlled trial (the SELF study).

    Science.gov (United States)

    Littlewood, Chris; Bateman, Marcus; Brown, Kim; Bury, Julie; Mawson, Sue; May, Stephen; Walters, Stephen J

    2016-07-01

    To evaluate the clinical effectiveness of a self-managed single exercise programme versus usual physiotherapy treatment for rotator cuff tendinopathy. Multi-centre pragmatic unblinded parallel group randomised controlled trial. UK National Health Service. Patients with a clinical diagnosis of rotator cuff tendinopathy. The intervention was a programme of self-managed exercise prescribed by a physiotherapist in relation to the most symptomatic shoulder movement. The control group received usual physiotherapy treatment. The primary outcome measure was the Shoulder Pain & Disability Index (SPADI) at three months. Secondary outcomes included the SPADI at six and twelve months. A total of 86 patients (self-managed loaded exercise n=42; usual physiotherapy n=44) were randomised. Twenty-six patients were excluded from the analysis because of lack of primary outcome data at the 3 months follow-up, leaving 60 (n=27; n=33) patients for intention to treat analysis. For the primary outcome, the mean SPADI score at three months was 32.4 (SD 20.2) for the self-managed group, and 30.7 (SD 19.7) for the usual physiotherapy treatment group; mean difference adjusted for baseline score: 3.2 (95% Confidence interval -6.0 to +12.4 P = 0.49).By six and twelve months there remained no significant difference between the groups. This study does not provide sufficient evidence of superiority of one intervention over the other in the short-, mid- or long-term and hence a self-management programme based around a single exercise appears comparable to usual physiotherapy treatment. © The Author(s) 2015.

  15. Rotator Cuff Injuries.

    Science.gov (United States)

    Connors, G. Patrick

    Many baseball players suffer from shoulder injuries related to the rotator cuff muscles. These injuries may be classified as muscular strain, tendonitis or tenosynovitis, and impingement syndrome. Treatment varies from simple rest to surgery, so it is important to be seen by a physician as soon as possible. In order to prevent these injuries, the…

  16. Increased adhesion of polydimethylsiloxane (PDMS) to acrylic adhesive tape for medical use by surface treatment with an atmospheric pressure rotating plasma jet

    International Nuclear Information System (INIS)

    Jofre-Reche, José Antonio; Martín-Martínez, José Miguel; Pulpytel, Jérôme; Arefi-Khonsari, Farzaneh

    2016-01-01

    The surface properties of polydimethylsiloxane (PDMS) were modified by treatment with an atmospheric pressure rotating plasma jet (APPJ) and the surface modifications were studied to assess its hydrophilicity and adhesion to acrylic adhesive tape intended for medical applications. Furthermore, the extent of hydrophobic recovery under different storage conditions was studied. The surface treatment of PDMS with the APPJ under optimal conditions noticeably increased the oxygen content and most of the surface silicon species were fully oxidized. A brittle silica-like layer on the outermost surface was created showing changes in topography due to the formation of grooves and cracks. A huge improvement in T-peel and the shear adhesive strength of the APPJ-treated PDMS surface/acrylic tape joints was obtained. On the other hand, the hydrophilicity of the PDMS surface increased noticeably after the APPJ treatment, but 24 h after treatment almost 80% hydrophobicity was recovered and the adhesive strength was markedly reduced with time after the APPJ treatment. However, the application of an acrylic adhesive layer on the just-APPJ-treated PDMS surface retained the adhesive strength, limiting the extent of hydrophobic recovery. (paper)

  17. Elementary Statistics Tables

    CERN Document Server

    Neave, Henry R

    2012-01-01

    This book, designed for students taking a basic introductory course in statistical analysis, is far more than just a book of tables. Each table is accompanied by a careful but concise explanation and useful worked examples. Requiring little mathematical background, Elementary Statistics Tables is thus not just a reference book but a positive and user-friendly teaching and learning aid. The new edition contains a new and comprehensive "teach-yourself" section on a simple but powerful approach, now well-known in parts of industry but less so in academia, to analysing and interpreting process dat

  18. On the stability of four-legged tables

    CERN Document Server

    Martin, André Jean

    2007-01-01

    We prove that a perfect square table with four legs, placed on continuous irregular ground with a local slope of at most 14.4 degrees and later 35 degrees, can be put into equilibrium on the ground by a "rotation" of less than 90 degrees. We also discuss the case of non-square tables and make the conjecture that equilibrium can be found if the four feet lie on a circle.

  19. Intra-pulp temperature increase of equine cheek teeth during treatment with motorized grinding systems: influence of grinding head position and rotational speed.

    Science.gov (United States)

    Haeussler, Silvia; Luepke, Matthias; Seifert, Hermann; Staszyk, Carsten

    2014-02-21

    In equine practice, teeth corrections by means of motorized grinding systems are standard procedure. The heat resulting from that treatment may cause irreparable damage to the dental pulp. It has been shown that a 5.5°C temperature rise may cause severe destruction in pulp cells. Hence, the capability to continuously form secondary dentine is lost, and may lead, due to equine-typical occlusal tooth abrasion, to an opening of the pulp cavity.To obtain reliable data on the intra-pulp increase in temperature during corrective treatments, equine cheek teeth (CT) were modified in a way (occlusal surface smoothed, apical parts detached, pulp horns standardized) that had been qualified in own former published studies. All parameters influencing the grinding process were standardized (force applied, initial temperatures, dimensions of pulp horns, positioning of grinding disk, rotational speed). During grinding experiments, imitating real dental treatments, the time span for an intra-pulp temperature increase of 5.5°C was determined. The minimum time recorded for an intra-pulp temperature increase of 5.5°C was 38 s in mandibular CT (buccal grinding, 12,000 rpm) and 70 s in maxillary CT (flat occlusal grinding, 12,000 rpm). The data obtained showed that doubling the rotational speed of the disk results in halving the time span after which the critical intra-pulp temperature increase in maxillary CT is reached. For mandibular CT, the time span even drops by two thirds. The use of standardized hypsodont CT enabled comparative studies of intra-pulp heating during the grinding of occlusal tooth surfaces using different tools and techniques. The anatomical structure of the natural vital hypsodont tooth must be kept in mind, so that the findings of this study do not create a deceptive sense of security with regard to the time-dependent heating of the native pulp.

  20. Tratamento conservador das lesões parciais e completas do manguito rotador Conservative treatment of partial and complete tears of the rotator cuff

    Directory of Open Access Journals (Sweden)

    Osvandré Lech

    2000-09-01

    Full Text Available A lesão do manguito rotador é a mais freqüente patologia do ombro. Cerca de 180 pacientes foram tratados conservadoramente nos dois Serviços nos anos de 1996 e 1997. Este grupo recebeu uma ampla gama de tratamentos (apenas medicação, exercícios caseiros, infiltração, fisioterapia, etc.. Este estudo avaliou os resultados do tratamento conservador em 26 pacientes com rupturas parcial e total do manguito rotador. O protocolo consistiu de um programa com 6 meses de duração que incluiu terapia miofascial específica, exercícios ativos assistidos e de fortalecimento dos músculos do manguito rotador e da musculatura axioescapular. Os fatores de inclusão no estudo foram: 1 realizar todo o programa com apenas um reabilitador; 2 não ter recebido infiltração; 3 não ter tido cirurgia prévia; 4 não ter reumatopatia diagnosticada. Seis meses após a alta, dezoito pacientes (69,22% apresentavam resultado satisfatório, enquanto que os demais 08 casos (30,78% foram considerados insatisfatórios e tiveram indicação cirúrgica.The lesion of rotator cuff is the most frequent lesion of the shoulder. Circa 180 patients were conservatively treated in both Clinics during the years of 1976 and 1997. This group of patients received a wide range of treatments (only medication, home exercises, infiltration, physiotherapy, etc. This study evaluated the results of the conservative treatment in 26 patients with partial and total rupture of the rotator cuff. The protocol consisted of a program with duration of 6 months including specific miofascial therapy, assisted active exercises and of strengthening of the muscles of the rotator cuff and axioscapular musculature. The inclusion criteria of the study were: 1 to carry the program with just one reabilitator; 2 no previous infiltration; 3 no previous surgery; 4 absence of diagnosed rheumatopathy. Six months after the end of treatment, eighteen patients (69,22% presented with satisfactory results, while

  1. Reverse Shoulder Arthroplasty for the Treatment of Rotator Cuff Deficiency: A Concise Follow-up, at a Minimum of 10 Years, of Previous Reports.

    Science.gov (United States)

    Cuff, Derek J; Pupello, Derek R; Santoni, Brandon G; Clark, Rachel E; Frankle, Mark A

    2017-11-15

    We previously evaluated 94 patients (96 shoulders) who underwent reverse shoulder arthroplasty using a central compressive screw with 5.0-mm peripheral locking screws for baseplate fixation and a center of rotation lateral to the glenoid as treatment for end-stage rotator cuff deficiency. The purpose of this study was to report updated results at a minimum follow-up of 10 years. Forty patients (42 shoulders) were available for clinical follow-up. In the patients available for study, implant survivorship, with the end point being revision for any reason, was 90.7%. Since our 5-year report, 2 patients underwent revision surgery; 1 patient sustained a periprosthetic fracture 7 years postoperatively and 1 patient had a dislocation because of chronic shoulder instability at 8 years postoperatively. At a minimum follow-up of 10 years, the patients continued to maintain their improved outcome scores and range of motion, which were comparable with earlier follow-up evaluations. Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

  2. Reverse Total Shoulder Arthroplasty as Treatment for Rotator Cuff-Tear Arthropathy and Shoulder Dislocations in an Elderly Male with Parkinson’s Disease

    Directory of Open Access Journals (Sweden)

    John G. Skedros

    2017-01-01

    Full Text Available We report the case of a 70-year-old male with Parkinson’s disease (PD and recurrent traumatic left shoulder dislocations. This case is rare because (1 he had a massive irreparable rotator cuff tear and end-stage arthritis (i.e., rotator cuff-tear arthropathy of the same shoulder and (2 his shoulder was ultimately reconstructed with a reverse total shoulder arthroplasty (RTSA. His first dislocation occurred after a fall. Recurrent shoulder dislocations occurred despite successful closed reduction and physical therapy. Initial surgical treatment included an open capsular-labral reconstruction; RTSA was not an ideal option because of the presumed risk of failure from PD-related dyskinesias. However, the capsular-labral reconstruction failed after he lost balance and stumbled but did not fall. A RTSA was then done which restored the patient’s shoulder stability and greatly improved his pain. At final follow-up two years later, he reported pain relief and improved function. This was partially attributed to the fact that he had moved to an assisted living center. He also began using an electric wheelchair one year after the RTSA. We report this case because of the unusual set of conditions and circumstances, namely, the implantation of a RTSA in a patient with PD and shoulder instability.

  3. Empirical yield tables for Michigan.

    Science.gov (United States)

    Jerold T. Hahn; Joan M. Stelman

    1984-01-01

    Describes the tables derived from the 1980 Forest Survey of Michigan and presents ways the tables can be used. These tables are broken down according to Michigan's four Forest Survey Units, 14 forest types, and 5 site-index classes.

  4. Empirical yield tables for Wisconsin.

    Science.gov (United States)

    Jerold T. Hahn; Joan M. Stelman

    1989-01-01

    Describes the tables derived from the 1983 Forest Survey of Wisconsin and presents ways the tables can be used. These tables are broken down according to Wisconsin`s five Forest Survey Units and 14 forest types.

  5. Permit.LOA table

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This table includes the effective dates by vessel and permit number for each issued letter of authorization (LOA) by the Permit Office (APSD)

  6. VMS forms Output Tables

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These output tables contain parsed and format validated data from the various VMS forms that are sent from any given vessel, while at sea, from the VMS devices on...

  7. The Periodic Table CD.

    Science.gov (United States)

    Banks, Alton J.; Holmes, Jon L.

    1995-01-01

    Describes the characteristics of the digitized version of The Periodic Table Videodisc. Provides details about the organization of information and access to the data via Macintosh and Windows computers. (DDR)

  8. Setting the Periodic Table.

    Science.gov (United States)

    Saturnelli, Annette

    1985-01-01

    Examines problems resulting from different forms of the periodic table, indicating that New York State schools use a form reflecting the International Union of Pure and Applied Chemistry's 1984 recommendations. Other formats used and reasons for standardization are discussed. (DH)

  9. Body Mass Index Table

    Science.gov (United States)

    ... Families ( We Can! ) Health Professional Resources Body Mass Index Table 1 for BMI greater than 35, go ... Health Information Email Alerts Jobs and Careers Site Index About NHLBI National Institute of Health Department of ...

  10. Decision table languages and systems

    CERN Document Server

    Metzner, John R

    1977-01-01

    ACM Monograph Series: Decision Table Languages and Systems focuses on linguistic examination of decision tables and survey of the features of existing decision table languages and systems. The book first offers information on semiotics, programming language features, and generalization. Discussions focus on semantic broadening, outer language enrichments, generalization of syntax, limitations, implementation improvements, syntactic and semantic features, decision table syntax, semantics of decision table languages, and decision table programming languages. The text then elaborates on design im

  11. Use of cuff tear arthroplasty head prosthesis for rotator cuff arthropathy treatment in elderly patients with comorbidities.

    Science.gov (United States)

    Carvalho, Cassiano Diniz; Andreoli, Carlos Vicente; Pochini, Alberto de Castro; Ejnisman, Benno

    2016-01-01

    To evaluate the clinical and functional behavior of patients undergoing cuff tear arthroplasty at different stages of the disease. Cuff tear arthroplasty hemiarthroplasties were performed in 34 patients with rotator cuff arthropathy and associated comorbidities, classified according to Seebauer. The mean age was 76.3 years, and the sample comprised 23 females (67.6%) and 11 males (32.4%). The mean follow-up period was 21.7 months, and evaluations were performed using the Visual Analog Scale for pain and the Constant scale. There were no statistically significant differences in the mean reduction in the Visual Analog Scale or in the Constant scale increase between the female and male groups. The variation between the pre- and postoperative Visual Analog Scale and Constant scale evaluations was significant. There was also no statistically significant difference between the Seebauer classification groups regarding the mean Visual Analog Scale reduction, or the mean Constant scale increase. Cuff tear arthroplasty shoulder hemiarthroplasty is a good option for rotator cuff arthropathy in patients with comorbidities. Avaliar o comportamento clínico e funcional dos pacientes submetidos à artroplastia do tipo cuff tear arthroplasty para o tratamento da artropatia do manguito rotador em diferentes estágios da afecção. Foram realizadas 34 hemiartroplastias do tipo cuff tear arthroplasty em 34 pacientes com artropatia do manguito rotador e comorbidades associadas, classificadas de acordo com Seebauer. A média de idade foi de 76,3 anos, sendo 23 pacientes do sexo feminino (67,6%) e 11 do sexo masculino (32,4%). O seguimento médio foi de 21,7 meses e a avaliação foi realizada por meio da Escala Visual Analógica da dor e pela escala de Constant. Não houve diferença estatisticamente significante entre os grupos feminino e masculino, tanto nas médias de redução na Escala Visual Analógica quanto nas de aumento na escala de Constant. A variação entre as avalia

  12. Treatment of hydrocarbon-rich wastewater using oil degrading bacteria and phototrophic microorganisms in rotating biological contactor: Effect of N:P ratio

    International Nuclear Information System (INIS)

    Chavan, Anal; Mukherji, Suparna

    2008-01-01

    Treatment of hydrocarbon-rich industrial wastewater in bioreactors using heterotrophic microorganisms is often associated with various operational problems. In this study, a consortium of phototrophic microorganisms and a bacterium is developed on the discs of a rotating biological contactor (RBC) for treatment of wastewater containing diesel oil. The reactor was fed with oil degrading bacterium, Burkholderia cepacia and oil tolerant phototrophic microorganisms. After biofilm formation and acclimatization to 0.6% (v/v) diesel, continuous-mode operation was initiated at 21 h hydraulic retention time (HRT). Residual diesel in the effluent was 0.003%. Advantages of this system include good total petroleum hydrocarbon (TPH) removal, no soluble carbon source requirement and good settleability of biosolids. Biofilm observations revealed the predominance of B. cepacia and cyanobacteria (Phormidium, Oscillatoria and Chroococcus). The N:P ratio affected the relative dominance of the phototrophic microorganisms and bacterial culture. This ratio was a critical factor in determining the performance efficiency of the reactor. At 21 h HRT and organic loading of 27.33 g TPH/m 2 d, the N:P ratio 28.5:1 and 38:1 both yielded high and almost comparable TPH and COD removal efficiencies. This study presents a feasible technology for the treatment of hydrocarbon-rich wastewater from petrochemical industries and petroleum refineries

  13. Monitor tables for electron beams in radiotherapy

    International Nuclear Information System (INIS)

    Christ, G.; Dohm, O.S.

    2007-01-01

    The application of electron beams in radiotherapy is still based on tables of monitor units, although 3-D treatment planning systems for electron beams are available. This have several reasons: The need for 3-D treatment planning is not recognized; there is no confidence in the calculation algorithm; Monte-Carlo algorithms are too time-consuming; and the effort necessary to measure basic beam data for 3-D planning is considered disproportionate. However, the increasing clinical need for higher dosimetric precision and for more conformal electron beams leads to the requirement for more sophisticated tables of monitor units. The present paper summarizes and discusses the main aspects concerning the preparation of tables of monitor units for electron beams. The measurement equipment and procedures for measuring basic beam data needed for tables of monitor units for electron beams are described for a standard radiation therapy linac. The design of tables of monitor units for standard electron applicators is presented; this design can be extended for individual electron inserts, to variable applicator surface distances, to oblique beam incidence, and the use of bolus material. Typical data of an Elekta linac are presented in various tables. (orig.)

  14. Empirical yield tables for Minnesota.

    Science.gov (United States)

    Jerold T. Hahn; Gerhard K. Raile

    1982-01-01

    Describes the tables derived from the 1977 Forest Survey of Minnesota and presents examples of how the tables can be used. These tables are broken down according to Minnesota's four Forest Survey Units, 14 forest types, and 5 site index classes. Presents 210 of the 350 possible tables that contained sufficient data to justify publication.

  15. X-ray table

    International Nuclear Information System (INIS)

    Craig, J.R.; Otto, G.W.

    1980-01-01

    An X-ray radiographic or fluoroscopic table is described which includes a film holder with a frame attached to a cable running over end pulleys for positioning the holder longitudinally as desired under the table top. The holder has a front opening to receive a cassette-supporting tray which can be slid out on tracks to change the cassette. A reed switch on the frame is opened by a permanent magnet on the tray only when the tray is half-way out. When the switch is closed, an electromagnet locks the pulley and the holder in place. The holder is thus automatically locked in place not only during exposure (tray in) but when the tray is out for changing the cassette. To re-position the holder, the operator pulls the tray half-out and, using the tray itself, pushes the holder along the table, the holder being counterbalanced by a weight. (author)

  16. Table Tennis Club

    CERN Multimedia

    Table Tennis Club

    2012-01-01

    The CERN Table Tennis club and the Meyrin CTT are organizing two Table Tennis workshops from 2 to 6 July and from 20 to 24 August 2012 inclusive in Meyrin. A professional would be with your children from 14.00 pm to 18.00 pm: an instructor J + S category A. Training courses with specific themes, individual courses would be given depending on the level of the child’s game, “discoveries –table tennis games” courses and games with the robot. Other activities (stretching, relaxation). Afternoons (from 18 to 20 children): 40 CHF per workshop and per child. Evenings (from 18 to 20 adults): 60 CHF per workshop and per adult. For further information, please contact Mr. Monteil : Mobile: (+33) 06 61 31 70 47 E-mail: wilfried.monteil@free.fr.

  17. Periodic table of elements

    International Nuclear Information System (INIS)

    Fluck, E.; Heumann, K.G.

    1985-01-01

    Following a recommendation by the International Union for Pure and Applied Chemistry (IUPAC), the groups of the periodic table shall be numbered from 1 to 18, instead of I to VIII as before. The recommendations has been approved of by the Committee on Nomenclature of the American Chemical Society. The new system abandons the distinction between main groups (a) and auxiliary groups (b), which in the past frequently has been the reason for misunderstandings between European and American chemists, due to different handling. The publishing house VCH Verlagsgesellschaft recently produced a new periodic table that shows the old and the new numbering system together at a glance, so that chemists will have time to get familiar with the new system. In addition the new periodic table represents an extensive data compilation arranged by elements. The front page lists the chemical properties of elements, the back page their physical properties. (orig./EF) [de

  18. Pencil beam scanning proton therapy vs rotational arc radiation therapy: A treatment planning comparison for postoperative oropharyngeal cancer

    Energy Technology Data Exchange (ETDEWEB)

    Apinorasethkul, Ontida, E-mail: Ontida.a@gmail.com; Kirk, Maura; Teo, Kevin; Swisher-McClure, Samuel; Lukens, John N.; Lin, Alexander

    2017-04-01

    Patients diagnosed with head and neck cancer are traditionally treated with photon radiotherapy. Proton therapy is currently being used clinically and may potentially reduce treatment-related toxicities by minimizing the dose to normal organs in the treatment of postoperative oropharyngeal cancer. The finite range of protons has the potential to significantly reduce normal tissue toxicity compared to photon radiotherapy. Seven patients were planned with both proton and photon modalities. The planning goal for both modalities was achieving the prescribed dose to 95% of the planning target volume (PTV). Dose-volume histograms were compared in which all cases met the target coverage goals. Mean doses were significantly lower in the proton plans for the oral cavity (1771 cGy photon vs 293 cGy proton, p < 0.001), contralateral parotid (1796 cGy photon vs 1358 proton, p < 0.001), and the contralateral submandibular gland (3608 cGy photon vs 3251 cGy proton, p = 0.03). Average total integral dose was 9.1% lower in proton plans. The significant dosimetric sparing seen with proton therapy may lead to reduced side effects such as pain, weight loss, taste changes, and dry mouth. Prospective comparisons of protons vs photons for disease control, toxicity, and patient-reported outcomes are therefore warranted and currently being pursued.

  19. Treatment of the femoropopliteal arteries with a novel rotational atherectomy system: early single-center experience with the Pathway PV trademark Atherectomy System

    International Nuclear Information System (INIS)

    Wissgott, C.; Kamusella, P.; Richter, A.; Steinkamp, H.J.; Schink, T.; Klein-Weigel, P.

    2008-01-01

    Purpose: The main problem when treating the superficial femoral and popliteal artery with PTA or stent implantation is the relatively high restenosis rate. Several ablative systems are available as an alternative. The purpose of this prospective study was to evaluate the safety and performance of a novel rotational and aspirating atherectomy system. Materials and Methods: From June to December 2006, we treated 23 patients, median age 70.3 years (58 - 91), with the rotational atherectomy system. All patients had de-novo lesions of the SFA or PA with a minimum stenosis of 70%. According to the Rutherford classification, 39% of the patients were in category 2 and 61% in category 3. The median lesion length was 26.3 mm (5 - 100 mm). 26% of the patients had occlusions. Results: The technical success rate was 100%. In 14 cases (61%) additional balloon dilatation was applied, in two cases stent implantation were performed. The median treatment duration with the device was 187.7 ± 106.1 s (59 - 391 s). The aspirated volume was 116.5 ± 72.0 ml. The ankle brachial index improved from preinterventional 0.60 ± 0.16 to postinterventional 0.85 ± 0.13 and after 6 month 0.80 ± 0.13. During follow-up, two (8%) restenosis occurred. There were two complications, one dissection and one distal embolization. Follow-up could not be performed for two patients (8%). Conclusion: Atherectomy of femoropopliteal lesions with the Pathway PV trademark Atherectomy System is very safe and effective. The low restenosis rate of 8% is promising, but there is still a lack of long-term results

  20. Rotation of vertically oriented objects during earthquakes

    Science.gov (United States)

    Hinzen, Klaus-G.

    2012-10-01

    Vertically oriented objects, such as tombstones, monuments, columns, and stone lanterns, are often observed to shift and rotate during earthquake ground motion. Such observations are usually limited to the mesoseismal zone. Whether near-field rotational ground motion components are necessary in addition to pure translational movements to explain the observed rotations is an open question. We summarize rotation data from seven earthquakes between 1925 and 2009 and perform analog and numeric rotation testing with vertically oriented objects. The free-rocking motion of a marble block on a sliding table is disturbed by a pulse in the direction orthogonal to the rocking motion. When the impulse is sufficiently strong and occurs at the `right' moment, it induces significant rotation of the block. Numeric experiments of a free-rocking block show that the initiation of vertical block rotation by a cycloidal acceleration pulse applied orthogonal to the rocking axis depends on the amplitude of the pulse and its phase relation to the rocking cycle. Rotation occurs when the pulse acceleration exceeds the threshold necessary to provoke rocking of a resting block, and the rocking block approaches its equilibrium position. Experiments with blocks subjected to full 3D strong motion signals measured during the 2009 L'Aquila earthquake confirm the observations from the tests with analytic ground motions. Significant differences in the rotational behavior of a monolithic block and two stacked blocks exist.

  1. Tratamento artroscópico da tendinite calcária do manguito rotador Arthroscopic treatment of calcifying tendinitis of the rotator cuff

    Directory of Open Access Journals (Sweden)

    Arnaldo Amado Ferreira Neto

    2010-01-01

    Full Text Available OBJETIVO: Avaliar os resultados clínicos e radiográficos do tratamento cirúrgico por via artroscópica em pacientes com tendinite calcária do manguito rotador. MÉTODO: Foi realizado um estudo retrospectivo com análise de 20 pacientes que foram submetidos ao tratamento artroscópico da tendinite calcária do ombro, de março de 1999 a novembro de 2005. Seis pacientes foram excluídos devido à perda do seguimento. Com seguimento médio de 41,4 meses, oito pacientes (57% eram do sexo feminino e seis (43% do masculino; sendo o lado direito acometido em 10 (71% e o esquerdo em quatro (29%. Nove casos (64% apresentavam calcificação no tendão supraespinal, dois (14% no infraespinal e três (21% envolvendo os dois tendões. RESULTADOS: Em todos os casos, realizou-se a ressecção dos depósitos de cálcio através da perfuração com agulha (Jelco® nº 14 e curetagem (minicureta. Dois ombros (14% foram submetidos à descompressão subacromial; um, (7% à exérese distal da clavícula; e, em três, (21% houve a necessidade de se fazer sutura tendão-tendão. Nenhum paciente foi submetido à reinserção tendão-osso. Pela escala da UCLA, a média da pontuação foi de 33 pontos (26-35, indicando que a maioria teve resultados bons. Na avaliação final radiográfica, nenhum paciente apresentava sinais de calcificações. CONCLUSÃO: O tratamento artroscópico da tendinite calcária do ombro permite a exérese da calcificação com segurança, obtendo-se resultados bons com relação à dor e à função do ombro.OBJECTIVE: To evaluate the clinical and radiographic results of arthroscopic treatment of the rotator cuff in patients with Calcifying Tendinitis. METHOD: A retrospective study of twenty patients submitted to arthroscopic treatment for rotator cuff Calcifying Tendinitis from March 1999 to November 2005. Six patients were excluded due to loss of follow-up. The average follow-up period was 41.4 months. Eight patients (57% were female and

  2. Climate change : transportation table

    International Nuclear Information System (INIS)

    Ogilvie, K.

    1999-01-01

    The Kyoto Protocol sets greenhouse gas (GHG) reduction targets for the post-2000 period. If ratified, Canada will be committed to reduce emissions of GHGs by 6 per cent below 1990 levels during the period 2008-2012. A recommended national strategy is to establish 'issue tables' that will advise the Ministers of Energy and Environment on preferred options to reach the Kyoto target and to identify early actions that can be taken. The 'Transportation Table' which is the focus of this paper, is one of the 15 sectoral tables. The Transportation Table will identify by July 1999, specific measures to mitigate GHG emissions from Canada's transportation sector. Currently, GHG emissions from the transportation sector are predicted to be 27 per cent above 1990 levels by 2010. Fuel taxes, emissions trading, and research into improved vehicle technologies and automotive fuels are some of the recommended options which can help reduce emissions trading from the transportation sector. Studies are underway to deal with emissions from transport in two sub-groups, freight and passenger. 1 fig

  3. Statistical tables 2003

    International Nuclear Information System (INIS)

    2003-01-01

    The energy statistical table is a selection of statistical data for energies and countries from 1997 to 2002. It concerns the petroleum, the natural gas, the coal, the electric power, the production, the external market, the consumption per sector, the energy accounting 2002 and graphs on the long-dated forecasting. (A.L.B.)

  4. A Modern Periodic Table.

    Science.gov (United States)

    Herrenden-Harker, B. D.

    1997-01-01

    Presents a modern Periodic Table based on the electron distribution in the outermost shell and the order of filling of the sublevels within the shells. Enables a student to read off directly the electronic configuration of the element and the order in which filling occurs. (JRH)

  5. Conversion tables. Appendix I

    International Nuclear Information System (INIS)

    McKerrell, H.

    1975-01-01

    Tables are presented for the conversion of standard (5568 year half-life) C-14 dates to calendar years. The major part of the data converts C-14 dates to tree-ring years: additional data are given, based on the Egyptian historical curve. (U.K.)

  6. Partial rotator cuff repair and biceps tenotomy for the treatment of patients with massive cuff tears and retained overhead elevation: midterm outcomes with a minimum 5 years of follow-up.

    Science.gov (United States)

    Cuff, Derek J; Pupello, Derek R; Santoni, Brandon G

    2016-11-01

    A subset of patients with massive irreparable rotator cuff tears present with retained overhead elevation and pain as their primary complaint. Our aim was to evaluate the outcomes of partial arthroscopic rotator cuff repair with biceps tenotomy and to report the failure rate of this procedure for patients with >5 years of follow-up. Thirty-four patients underwent partial rotator cuff repair and biceps tenotomy for treatment of a massive rotator cuff tear. Patients had preoperative active forward elevation >120° and no radiographic evidence of glenohumeral arthritis. Patients were followed up clinically and radiographically, and 28 patients had a minimum of 5 years of follow-up. Failure was defined as an American Shoulder and Elbow Surgeons score of 90°, or revision to reverse shoulder arthroplasty during the study period. Patients demonstrated improvements in average preoperative to postoperative American Shoulder and Elbow Surgeons scores (46.6 to 79.3 [P rotation (38° to 39° [P = 1.0]), or internal rotation (84% to 80% [P = 1.0]) was identified; 36% of patients had progression of the Hamada stage. The failure rate was 29%; 75% of patients were satisfied with their index procedure. Partial rotator cuff repair and biceps tenotomy for patients with massive irreparable rotator cuff tears with retained overhead elevation and pain as the primary complaint produced reasonable outcomes at midterm follow-up of at least 5 years. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  7. SU-E-J-170: Dosimetric Consequences of Uncorrected Rotational Setup Errors During Stereotactic Body Radiation Therapy (SBRT) Treatment of Pancreatic Cancers

    Energy Technology Data Exchange (ETDEWEB)

    Di Maso, L [Chicago, IL (United States); Forbang, R Teboh; Zhang, Y; Herman, J; Lee, J [John Hopkins University, Baltimore, MD (United States)

    2015-06-15

    Purpose: To explore the dosimetric consequences of uncorrected rotational setup errors during SBRT for pancreatic cancer patients. Methods: This was a retrospective study utilizing data from ten (n=10) previously treated SBRT pancreas patients. For each original planning CT, we applied rotational transformations to derive additional CT images representative of possible rotational setup errors. This resulted in 6 different sets of rotational combinations, creating a total of 60 CT planning images. The patients’ clinical dosimetric plans were then applied to their corresponding rotated CT images. The 6 rotation sets encompassed a 3, 2 and 1-degree rotation in each rotational direction and a 3-degree in just the pitch, a 3-degree in just the yaw and a 3-degree in just the roll. After the dosimetric plan was applied to the rotated CT images, the resulting plan was then evaluated and compared with the clinical plan for tumor coverage and normal tissue sparing. Results: PTV coverage, defined here by V33 throughout all of the patients’ clinical plans, ranged from 92–98%. After an n degree rotation in each rotational direction that range decreased to 68–87%, 85–92%, and 88– 94% for n=3, 2 and 1 respectively. Normal tissue sparing defined here by the proximal stomach V15 throughout all of the patients’ clinical plans ranged from 0–8.9 cc. After an n degree rotation in each rotational direction that range increased to 0–17 cc, 0–12 cc, and 0–10 cc for n=3, 2, and 1 respectively. Conclusion: For pancreatic SBRT, small rotational setup errors in the pitch, yaw and roll direction on average caused under dosage to PTV and over dosage to proximal normal tissue. The 1-degree rotation was on average the least detrimental to the normal tissue and the coverage of the PTV. The 3-degree yaw created on average the lowest increase in volume coverage to normal tissue. This research was sponsored by the AAPM Education Council through the AAPM Education and Research

  8. A periodic table for cancer.

    Science.gov (United States)

    Epstein, Richard J

    2015-01-01

    Cancers exhibit differences in metastatic behavior and drug sensitivity that correlate with certain tumor-specific variables such as differentiation grade, growth rate/extent and molecular regulatory aberrations. In practice, patient management is based on the past results of clinical trials adjusted for these biomarkers. Here, it is proposed that treatment strategies could be fine-tuned upfront simply by quantifying tumorigenic spatial (cell growth) and temporal (genetic stability) control losses, as predicted by genetic defects of cell-cycle-regulatory gatekeeper and genome-stabilizing caretaker tumor suppressor genes, respectively. These differential quantifications of tumor dysfunction may in turn be used to create a tumor-specific 'periodic table' that guides rational formulation of survival-enhancing anticancer treatment strategies.

  9. Clinical and radiological outcome of conservative vs. surgical treatment of atraumatic degenerative rotator cuff rupture : design of a randomized controlled trial

    NARCIS (Netherlands)

    Heerspink, Frederik O. Lambers; Hoogeslag, Roy A. G.; Diercks, Ron L.; van Eerden, Pepijn J. M.; van den Akker-Scheek, Inge; van Raay, Jos J. A. M.

    2011-01-01

    Background: Subacromial impingement syndrome is a frequently observed disorder in orthopedic practice. Lasting symptoms and impairment may occur when a subsequent atraumatic rotator cuff rupture is also present. However, degenerative ruptures of the rotator cuff can also be observed in asymptomatic

  10. Seashore marine table quiz

    OpenAIRE

    Institute, Marine

    2013-01-01

    Develop an increasing awareness of plants and animals that live in local marine environments including the seashore, seas and oceans of Ireland. After learning all about the seashore and other marine related lessons, this quiz can be used to evaluate the student’s knowledge of the marine related living things and natural environments. The table quiz can be used as a guide, highlighting facts about the marine environment and some of the animals that live there.

  11. [Effectiveness comparison of flexible fixation and rigid fixation in treatment of ankle pronation-external rotation fractures with distal tibiofibular syndesmosis].

    Science.gov (United States)

    Li, Yuewei; Zhang, Minghui; Li, Xiaorong; Chen, Xiaoyong; Deng, Jianlong

    2017-07-01

    To compare the effectiveness of flexible fixation and rigid fixation in the treatment of ankle pronation-external rotation fractures with distal tibiofibular syndesmosis. A retrospective analysis was made on the clinical data of 50 patients with ankle pronation-external rotation fractures and distal tibiofibular syndesmosis treated between January 2013 and December 2015. Suture-button fixation was used in 23 patients (flexible fixation group) and cortical screw fixation in 27 patients (rigid fixation group). There was no significant difference in age, gender, weight, side, fracture type, and time from trauma to surgery between 2 groups ( P >0.05). The operation time, medial clear space (MCS), tibiofibular clear space (TFCS), tibiofibular overlap (TFO), American Orthopaedic Foot and Ankle Society (AOFAS) score, and Foot and Ankle Disability Index (FADI) score were compared between 2 groups. The operation time was (83.0±9.1) minutes in the flexible fixation group and was (79.6±13.1) minutes in the rigid fixation group, showing no significant difference ( t =1.052, P =0.265). All patients achieved healing of incision by first intention. The patients were followed up 12-20 months (mean, 14 months). The X-ray films showed good healing of fracture in 2 groups. There was no screw fracture, delayed union or nounion. The fracture healing time was (12.1±2.5) months in the flexible fixation group and was (11.3±3.2) months in the rigid fixation group, showing no significant difference between 2 groups ( t =1.024, P =0.192). Reduction loss occurred after removal of screw in 2 cases of the rigid fixation group. At last follow-up, there was no significant difference in MCS, TFCS, TFO, AOFAS score and FADI score between 2 groups ( P >0.05). Suture-button fixation has similar effectiveness to screw fixation in ankle function and imaging findings, and flexible fixation has lower risk of reduction loss of distal tibiofibular syndesmosis than rigid fixation.

  12. Table Tennis Club

    CERN Document Server

    Table Tennis Club

    2012-01-01

    2012 CERN Table Tennis Tournament As the campaign launched by the CERN medical service “Move! & Eat better” is designed in particular to encourage people at CERN to take more regular exercise, the CERN Table Tennis Club, with its traditional CERN Table Tennis Tournament is providing an excellent opportunity to practice moving. The tournament will take place at the Meyrin CTT, 2 rue de Livron, Saturday August 25, 2012, in the afternoon (starting at 13:30). It is open to all CERN staff, users, visitors and families, including of course summer students, who are strongly encouraged to participate. In order to register, simply send an E-mail to Jean-Pierre Revol (jean-pierre.revol@cern.ch). You may also find useful information on the Club Web page http://www.cern.ch/tabletennis CERN 2011 champion Savitha Flaecher, between the finalist Bertrand Mouches on her left, the winner of the consolation draw on her right (Sudarshan Paramesvaran), and far left, Denis Moriaud (semi-finalist a...

  13. SRTC - Gap Analysis Table

    International Nuclear Information System (INIS)

    M.L. Johnson

    2005-01-01

    The purpose of this document is to review the existing SRTC design against the ''Nuclear Safety Design Bases for License Application'' (NSDB) [Ref. 10] requirements and to identify codes and standards and supplemental requirements to meet these requirements. If these codes and standards and supplemental requirements can not fully meet these safety requirements then a ''gap'' is identified. These gaps will be identified here and addressed using the ''Site Rail Transfer Cart (SRTC) Design Development Plan'' [Ref. 14]. The codes and standards, supplemental requirements, and design development requirements are provided in the SRTC and associated rails gap analysis table in Appendix A. Because SRTCs are credited with performing functions important to safety (ITS) in the NSDB [Ref. 10], design basis requirements are applicable to ensure equipment is available and performs required safety functions when needed. The gap analysis table is used to identify design objectives and provide a means to satisfy safety requirements. To ensure that the SRTC and rail design perform required safety Functions and meet performance criteria, this portion of the gap analysis table supplies codes and standards sections and the supplemental requirements and identifies design development requirements, if needed

  14. Global Reference Tables Services Architecture

    Data.gov (United States)

    Social Security Administration — This database stores the reference and transactional data used to provide a data-driven service access method to certain Global Reference Table (GRT) service tables.

  15. Aggregation Algorithms in Heterogeneous Tables

    Directory of Open Access Journals (Sweden)

    Titus Felix FURTUNA

    2006-01-01

    Full Text Available The heterogeneous tables are most used in the problem of aggregation. A solution for this problem is to standardize these tables of figures. In this paper, we proposed some methods of aggregation based on the hierarchical algorithms.

  16. Idaho National Engineering Laboratory Conceptual Site Treatment Plan. Sections 1 through 8, Tables 2-1 through 6-1, Figures 1 and 2

    International Nuclear Information System (INIS)

    Eaton, D.

    1993-10-01

    The US Department of Energy (DOE) is required by Section 3021(b) of the Resource Conservation and Recovery Act (RCRA), as amended by the Federal Facility Compliance Act (FFCAct), to prepare plans describing the development of treatment capacities and technologies for treating mixed waste. The FFCAct requires site treatment plans (STPs or plans) to be developed for each site at which DOE generates or stores mixed waste and submitted to the host state or the US Environmental Protection Agency (EPA) for either approval, approval with modification, or disapproval. The Idaho National Engineering Laboratory (INEL) Conceptual Site Treatment Plan (CSTP) is the preliminary version of the plan required by the FFCAct and is being provided to the State of Idaho, the EPA, and others for review. A list of the other DOE sites preparing CSTPs is included in Appendix A of this document. In addition to aiding the INEL in formulating its Final Proposed STP, this CSTP will also provide information to other DOE sites for use in identifying common technology needs and potential options for treating their wastes. The INEL CSTP is also intended to be used in conjunction with CSTPs from other sites as a basis for nationwide discussions among state regulators, the EPA, and other interested parties on treatment strategies and options, and on technical and equity issues associated with DOE's mixed waste

  17. Rotator cuff exercises

    Science.gov (United States)

    ... 25560729 . Read More Frozen shoulder Rotator cuff problems Rotator cuff repair Shoulder arthroscopy Shoulder CT scan Shoulder MRI scan Shoulder pain Patient Instructions Rotator cuff - self-care Shoulder surgery - discharge Using your ...

  18. Outcome and Structural Integrity of Rotator Cuff after Arthroscopic Treatment of Large and Massive Tears with Double Row Technique: A 2-Year Followup

    Directory of Open Access Journals (Sweden)

    Ignacio Carbonel

    2013-01-01

    Full Text Available Purpose. The purpose of this study was to evaluate the functional outcome and the tendon healing after arthroscopic double row rotator cuff repair of large and massive rotator cuff tears. Methods. 82 patients with a full-thickness large and massive rotator cuff tear underwent arthroscopic repair with double row technique. Results were evaluated by use of the UCLA, ASES, and Constant questionnaires, the Shoulder Strength Index (SSI, and range of motion. Follow-up time was 2 years. Magnetic resonance imaging (MRI studies were performed on each shoulder preoperatively and 2 years after repair. Results. 100% of the patients were followed up. UCLA, ASES, and Constant questionnaires showed significant improvement compared with preoperatively (P<0.001. Range of motion and SSI in flexion, abduction, and internal and external rotation also showed significant improvement (P<0.001. MRI studies showed 24 cases of tear after repair (29%. Only 8 cases were a full-thickness tear. Conclusions. At two years of followup, in large and massive rotator cuff tears, an arthroscopic double row rotator cuff repair technique produces an excellent functional outcome and structural integrity.

  19. Rotating electrical machines

    CERN Document Server

    Le Doeuff, René

    2013-01-01

    In this book a general matrix-based approach to modeling electrical machines is promulgated. The model uses instantaneous quantities for key variables and enables the user to easily take into account associations between rotating machines and static converters (such as in variable speed drives).   General equations of electromechanical energy conversion are established early in the treatment of the topic and then applied to synchronous, induction and DC machines. The primary characteristics of these machines are established for steady state behavior as well as for variable speed scenarios. I

  20. Rotation and solvation of ammonium ion

    International Nuclear Information System (INIS)

    Perrin, C.L.; Gipe, R.K.

    1987-01-01

    From nitrogen-15 spin-lattice relaxation times and nuclear Overhauser enhancements, the rotational correlations time tau/sub c/ for 15 NH 4 + was determined in s series of solvents. Values of tau/sub c/ range from 0.46 to 20 picoseconds. The solvent dependent of tau/sub c/ cannot be explained in terms of solvent polarity, molecular dipole moment, solvent basicity, solvent dielectric relaxation, or solvent viscosity. The rapid rotation and the variation with solvent can be accounted for by a model that involves hydrogen bonding of an NH proton to more than one solvent molecule in a disordered solvation environment. 25 references, 1 table

  1. Quality assurance for a six degrees-of-freedom table using a 3D printed phantom.

    Science.gov (United States)

    Woods, Kyle; Ayan, Ahmet S; Woollard, Jeffrey; Gupta, Nilendu

    2018-01-01

    To establish a streamlined end-to-end test of a 6 degrees-of-freedom (6DoF) robotic table using a 3D printed phantom for periodic quality assurance. A 3D printed phantom was fabricated with translational and rotational offsets and an imbedded central ball-bearing (BB). The phantom underwent each step of the radiation therapy process: CT simulation in a straight orientation, plan generation using the treatment planning software, setup to offset marks at the linac, registration and corrected 6DoF table adjustments via hidden target test, delivery of a Winston-Lutz test to the BB, and verification of table positioning via field and laser lights. The registration values, maximum total displacement of the combined Winston-Lutz fields, and a pass or fail criterion of the laser and field lights were recorded. The quality assurance process for each of the three linacs were performed for the first 30 days. Within a 95% confidence interval, the overall uncertainty values for both translation and rotation were below 1.0 mm and 0.5° for each linac respectively. When combining the registration values and other uncertainties for all three linacs, the average deviations were within 2.0 mm and 1.0° of the designed translation and rotation offsets of the 3D print respectively. For all three linacs, the maximum total deviation for the Winston-Lutz test did not exceed 1.0 mm. Laser and light field verification was within tolerance every day for all three linacs given the latest guidance documentation for table repositioning. The 3D printer is capable of accurately fabricating a quality assurance phantom for 6DoF positioning verification. The end-to-end workflow allows for a more efficient test of the 6DoF mechanics while including other important tests needed for routine quality assurance. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

  2. A new scale measuring translation of the humeral head as a prognostic factor for the treatment of large and massive rotator cuff tears.

    Science.gov (United States)

    Taniguchi, Noboru; D'Lima, Darryl D; Suenaga, Naoki; Chosa, Etsuo

    2018-02-01

    Failure rates after rotator cuff repair remain high in patients with massive tears. Although superior translation of the humeral head has been used to assess the severity of rotator cuff tears, the relevance of anterior migration of the humeral head to clinical outcomes has not been established. The purpose of this study was to investigate the potential role of the T-scale, a measure of the anterolateral translation of the humeral head, as a prognostic factor for rotator cuff repair. One hundred twenty consecutive patients with full-thickness rotator cuff tears underwent primary rotator cuff repair. The T-scale and acromiohumeral interval (AHI) were measured preoperatively on axial computed tomography scans and radiographs, respectively. The correlations of the T-scale and AHI with previously published scores and active forward elevation (FE) were investigated. The outcome of rotator cuff repairs was compared between patients with positive and patients with negative preoperative T-scale values. The preoperative T-scale but not AHI correlated significantly with postoperative FE and clinical scores in patients with large to massive tears but not in those with small to medium tears. Postoperative FE and clinical scores were significantly higher in patients with positive T-scale values than in those with negative T-scale values. The relative risk of retear was 2.0 to 7.9 times greater in patients with negative T-scale values. Patients with large to massive tears and negative T-scale values had poorer clinical outcomes and higher retear rates. A negative T-scale value represents a useful prognostic factor for considering reverse shoulder arthroplasty in patients at greater risk of retear after rotator cuff repair. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  3. Rotational motion in nuclei

    International Nuclear Information System (INIS)

    Bohr, A.

    1977-01-01

    History is surveyed of the development of the theory of rotational states in nuclei. The situation in the 40's when ideas formed of the collective states of a nucleus is evoked. The general rotation theory and the relation between the single-particle and rotational motion are briefly discussed. Future prospects of the rotation theory development are indicated. (I.W.)

  4. Rotational motion in nuclei

    International Nuclear Information System (INIS)

    Bohr, A.

    1976-01-01

    Nuclear structure theories are reviewed concerned with nuclei rotational motion. The development of the deformed nucleus model facilitated a discovery of rotational spectra of nuclei. Comprehensive verification of the rotational scheme and a successful classification of corresponding spectra stimulated investigations of the rotational movement dynamics. Values of nuclear moments of inertia proved to fall between two marginal values corresponding to rotation of a solid and hydrodynamic pattern of an unrotating flow, respectively. The discovery of governing role of the deformation and a degree of a symmetry violence for determining rotational degrees of freedon is pointed out to pave the way for generalization of the rotational spectra

  5. Radionuclide table. Pt. 1

    International Nuclear Information System (INIS)

    Legrand, Jean; Perolat, J.-P.; Lagoutine, Frederic; Le Gallic, Yves.

    The evaluation of the following 29 radionuclides is presented: 22 Na, 24 Na, sup(24m)Na, 51 Cr, 54 Mn, 57 Co, 58 Co, sup(58m)Co, 60 Co, sup(60m)Co, 75 Se, 103 Ru, sup(103m)Rh, sup(110m)Ag- 110 Ag, 109 Cd, 125 Sb, sup(125mTe), 125 I, 133 Xe, sup(133m)Xe, 131 Cs, 134 Cs, sup(134m)Cs, 139 Ce, 144 Ce- 144 Pr, 144 Pr, 169 Er, 186 Re, 203 Hg. The introduction contains a brief description of radioactive processes and the evaluation rules followed. The best values and associated uncertainties are given for each radionuclide for the major parameters of the decay scheme and the radiation intensities emitted, together with a decay table. Gamma, X-rays and sometimes conversion electron spectra are also provided [fr

  6. INTRODUCTION Outline of Round Tables Outline of Round Tables

    Science.gov (United States)

    Abarzhi, Snezhana I.; Sreenivasan, Katepalli R.

    2010-12-01

    -canonical" turbulent processes, identified problems which are most appealing to a broad international and interdisciplinary TMB community, focused on selecting quantitative criteria for the estimation of the quality and information capacity of experimental and numerical data sets, and outlined the needs and requirements for the TMB cyber-infrastructure. Upon intense discussions, participants of the Round Table agreed that it is still unclear if Kolmogorov turbulence is an observable physical phenomenon. Even for canonical (e.g. local, isotropic and homogeneous) turbulent flows the corrections to Kolmogorov theory are essential to incorporate. Several definitions of canonical turbulence were considered. It was noted that in a vast variety of realistic problems (under high and low energy density conditions from microscopic to astrophysical scales) the flow conditions depart from the assumptions of Kolmogorov theory. It is uncertain whether these distinctions can be completely accounted for with some higher-order corrections to Kolmogorov theory, whether such corrections are "continuous" or "singular", and whether their quantitative influence on the values of observables in a given parameter regime is small. It was stressed that in experiments on canonical turbulence the conditions of isotropy, locality and homogeneity are hard to achieve. Numerical simulations can open exciting avenues for accurate studies of fundamental theoretical issues provided their accuracy and dynamic range, requiring computations of peta-scale and higher levels, are satisfactory. Participants of the Round Table stressed that realistic turbulent processes depart from classical scenarios. They are characterized by sharp gradients of pressure and density, and may be subject to spatially varying and time-dependent acceleration, rotation and shocks, and are often influenced by diffusion of species, heat release and changes in chemical composition. Their sensitivity to details and transient character of the dynamics

  7. Symbol Tables and Branch Tables: Linking Applications Together

    Science.gov (United States)

    Handler, Louis M.

    2011-01-01

    This document explores the computer techniques used to execute software whose parts are compiled and linked separately. The computer techniques include using a branch table or indirect address table to connect the parts. Methods of storing the information in data structures are discussed as well as differences between C and C++.

  8. Kinematic variables of table vault on artistic gymnastics

    OpenAIRE

    FERNANDES,Sarah Maria Boldrini; CARRARA,Paulo; SERRÃO,Júlio Cerca; AMADIO,Alberto Carlos; MOCHIZUKI,Luis

    2016-01-01

    Abstract The table vault is an event of male and female Artistics Gymnastics. Although it can be performed in a variety of rotations and body positions in different phases, it can be separated in three groups: handspring, Yurchenko and Tsukahara. It is believed that kinematic variables of vault may vary according to group of vault or gymnast body position, but few studies compares the real differences among the three groups of vaults, comparing and describing the variables in different phases...

  9. Non-contact measurement of rotation angle with solo camera

    Science.gov (United States)

    Gan, Xiaochuan; Sun, Anbin; Ye, Xin; Ma, Liqun

    2015-02-01

    For the purpose to measure a rotation angle around the axis of an object, a non-contact rotation angle measurement method based on solo camera was promoted. The intrinsic parameters of camera were calibrated using chessboard on principle of plane calibration theory. The translation matrix and rotation matrix between the object coordinate and the camera coordinate were calculated according to the relationship between the corners' position on object and their coordinates on image. Then the rotation angle between the measured object and the camera could be resolved from the rotation matrix. A precise angle dividing table (PADT) was chosen as the reference to verify the angle measurement error of this method. Test results indicated that the rotation angle measurement error of this method did not exceed +/- 0.01 degree.

  10. [Results of a series of deltoid flaps for the treatment of massive rotator cuff tears with an average follow-up of 3.5 years].

    Science.gov (United States)

    Le Huec, J C; Liquois, F; Schaeverbecke, T; Zipoli, B; Chauveaux, D; Le Rebeller, A

    1996-01-01

    We report a series of 14 patients with a massive rotator cuff tear operated on with a deltoid flap according to Augereau's technique. The aim of this study was to evaluate the benefits of this technique using Constant's scoring system. The follow up is 40 months. 14 patients, mean age 59 years, with a total rotator cuff tear type III according to Gerber's classification were included. There was 13 total ruptures of the supra and infra spinatus tendon and one infraspinatus and subscapularis lesion. All the patients had shoulder pain, and the preoperative, Constant's score was 24.1/100. The diagnosis of the rotator cuff rupture was confirmed by X-rays, arthrography and ultra-sonography. 8 patients had a Magnetic Resonance Imaging (MRI) evaluation. The surgical procedure was the technique described by Augereau, and three patients had a resection of the distal clavicle. One patient had a small piece of dacron to reinforce the suture of a very thin deltoid flap. All the patients had a immobilization in abduction and the rehabilitation programm began immediately. Results on pain were good: +11.4 points according to Constant's score, but improvement strength (+0.7 point) or motion (+1 point) was not significative. Postoperative Constant's score was 46.9, ponderated score increased from 29.5 per cent to 57.5 per cent. Ten patients were very satisfied, 2 were satisfied and two were disappointed. One of them neaded shoulder arthrodesis; the other needed a new surgery to remove the piece of dacron, and was allayed with NSAI drugs. External rotation was slightly increased: +2 point. These results are similar to others series on pain relief, but the results are poor on strength restauration and on shoulder motion. This technique is a heavy surgical procedure and results are not better than arthroscopic sub acromial decompression for massive rotator cuff tear.

  11. Rotationally invariant correlation filtering

    International Nuclear Information System (INIS)

    Schils, G.F.; Sweeney, D.W.

    1985-01-01

    A method is presented for analyzing and designing optical correlation filters that have tailored rotational invariance properties. The concept of a correlation of an image with a rotation of itself is introduced. A unified theory of rotation-invariant filtering is then formulated. The unified approach describes matched filters (with no rotation invariance) and circular-harmonic filters (with full rotation invariance) as special cases. The continuum of intermediate cases is described in terms of a cyclic convolution operation over angle. The angular filtering approach allows an exact choice for the continuous trade-off between loss of the correlation energy (or specificity regarding the image) and the amount of rotational invariance desired

  12. Injection Therapies for Rotator Cuff Disease.

    Science.gov (United States)

    Lin, Kenneth M; Wang, Dean; Dines, Joshua S

    2018-04-01

    Rotator cuff disease affects a large proportion of the overall population and encompasses a wide spectrum of pathologies, including subacromial impingement, rotator cuff tendinopathy or tear, and calcific tendinitis. Various injection therapies have been used for the treatment of rotator cuff disease, including corticosteroid, prolotherapy, platelet-rich plasma, stem cells, and ultrasound-guided barbotage for calcific tendinitis. However, the existing evidence for these therapies remains controversial or sparse. Ultimately, improved understanding of the underlying structural and compositional deficiencies of the injured rotator cuff tissue is needed to identify the biological needs that can potentially be targeted with injection therapies. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Volume tables for red alder.

    Science.gov (United States)

    Floyd A. Johnson; R. M. Kallander; Paul G. Lauterbach

    1949-01-01

    The increasing importance of red alder as a commercial species in the Pacific Northwest has prompted the three agencies listed above to pool their tree measurement data for the construction of standard regional red alder volume tables. The tables included here were based on trees from a variety of sites and form classes. Approximately one quarter of the total number of...

  14. MCNPX Model/Table Comparison

    International Nuclear Information System (INIS)

    Hendricks, J.S.

    2003-01-01

    MCNPX is a Monte Carlo N-Particle radiation transport code extending the capabilities of MCNP4C. As with MCNP, MCNPX uses nuclear data tables to transport neutrons, photons, and electrons. Unlike MCNP, MCNPX also uses (1) nuclear data tables to transport protons; (2) physics models to transport 30 additional particle types (deuterons, tritons, alphas, pions, muons, etc.); and (3) physics models to transport neutrons and protons when no tabular data are available or when the data are above the energy range (20 to 150 MeV) where the data tables end. MCNPX can mix and match data tables and physics models throughout a problem. For example, MCNPX can model neutron transport in a bismuth germinate (BGO) particle detector by using data tables for bismuth and oxygen and using physics models for germanium. Also, MCNPX can model neutron transport in UO 2 , making the best use of physics models and data tables: below 20 MeV, data tables are used; above 150 MeV, physics models are used; between 20 and 150 MeV, data tables are used for oxygen and models are used for uranium. The mix-and-match capability became available with MCNPX2.5.b (November 2002). For the first time, we present here comparisons that calculate radiation transport in materials with various combinations of data charts and model physics. The physics models are poor at low energies (<150 MeV); thus, data tables should be used when available. Our comparisons demonstrate the importance of the mix-and-match capability and indicate how well physics models work in the absence of data tables

  15. Parameterization of rotational spectra

    International Nuclear Information System (INIS)

    Zhou Chunmei; Liu Tong

    1992-01-01

    The rotational spectra of the strongly deformed nuclei with low rotational frequencies and weak band mixture are analyzed. The strongly deformed nuclei are commonly encountered in the rare-earth region (e. g., 150 220). A lot of rotational band knowledge are presented

  16. Rotating reactors : a review

    NARCIS (Netherlands)

    Visscher, F.; Schaaf, van der J.; Nijhuis, T.A.; Schouten, J.C.

    2013-01-01

    This review-perspective paper describes the current state-of-the-art in the field of rotating reactors. The paper has a focus on rotating reactor technology with applications at lab scale, pilot scale and industrial scale. Rotating reactors are classified and discussed according to their geometry:

  17. Partial Thickness Rotator Cuff Tears: Current Concepts

    Science.gov (United States)

    Matthewson, Graeme; Beach, Cara J.; Nelson, Atiba A.; Woodmass, Jarret M.; Ono, Yohei; Boorman, Richard S.; Lo, Ian K. Y.; Thornton, Gail M.

    2015-01-01

    Partial thickness rotator cuff tears are a common cause of pain in the adult shoulder. Despite their high prevalence, the diagnosis and treatment of partial thickness rotator cuff tears remains controversial. While recent studies have helped to elucidate the anatomy and natural history of disease progression, the optimal treatment, both nonoperative and operative, is unclear. Although the advent of arthroscopy has improved the accuracy of the diagnosis of partial thickness rotator cuff tears, the number of surgical techniques used to repair these tears has also increased. While multiple repair techniques have been described, there is currently no significant clinical evidence supporting more complex surgical techniques over standard rotator cuff repair. Further research is required to determine the clinical indications for surgical and nonsurgical management, when formal rotator cuff repair is specifically indicated and when biologic adjunctive therapy may be utilized. PMID:26171251

  18. Partial Thickness Rotator Cuff Tears: Current Concepts

    Directory of Open Access Journals (Sweden)

    Graeme Matthewson

    2015-01-01

    Full Text Available Partial thickness rotator cuff tears are a common cause of pain in the adult shoulder. Despite their high prevalence, the diagnosis and treatment of partial thickness rotator cuff tears remains controversial. While recent studies have helped to elucidate the anatomy and natural history of disease progression, the optimal treatment, both nonoperative and operative, is unclear. Although the advent of arthroscopy has improved the accuracy of the diagnosis of partial thickness rotator cuff tears, the number of surgical techniques used to repair these tears has also increased. While multiple repair techniques have been described, there is currently no significant clinical evidence supporting more complex surgical techniques over standard rotator cuff repair. Further research is required to determine the clinical indications for surgical and nonsurgical management, when formal rotator cuff repair is specifically indicated and when biologic adjunctive therapy may be utilized.

  19. Effectiveness Of Plain Shoulder Radiograph In Detecting Degenerate Rotator Cuff Tears.

    Science.gov (United States)

    Hussain, Adnan; Muzzammil, Muhammad; Butt, Faisal; Valsamis, Epaminondas Markos; Dwyer, Amitabh J

    2018-01-01

    Studies have demonstrated radiographic findings of sclerosis and cortical irregularity at the greater tuberosity can suggest a rotator cuff tear. Plain radiographs are the most easily attainable first-line investigations in evaluating shoulder injuries. This study determines the effectiveness in predicting degenerate rotator cuff tears by detecting radiographic changes on shoulder x-rays. Retrospective cross-sectional study with a consecutive series of patients conducted in Hinchingbrooke Hospital, Huntingdon, United Kingdom from January 2015 to June 2017. Anteroposterior shoulder radiographs of 150 symptomatic patients who underwent shoulder arthroscopy were independently analysed by surgeons who were blinded from the arthroscopic results. Patients aged fewer than 30 and over 70 years were excluded. Patients with advanced osteoarthritis and cuff tear arthropathy evident on x-rays were also excluded. Sixty-five patients included in the study had rotator cuff tears on arthroscopy. Radiographic changes were correlated with arthroscopic findings to determine this test's ability to predict degenerate rotator cuff tears. When both cortical irregularity and sclerosis were present on the plain radiograph, these signs had a sensitivity of 78.8% [95% CI 65.7, 87.8%] and specificity 77.4% [95% CI 67.2, 85.0%] with a positive predictive value of 68.3%, using contingency table analysis. The presence of cortical irregularity was found to be a better predictor of a tear as compared to sclerosis. This study concludes that plain radiograph are good modality for initial evaluation of rotator cuff tears and detecting when both cortical irregularity and sclerosis. Consideration of these radiographic findings serves as a useful adjunct in diagnostic workup and can guide subsequent investigations and treatment when evaluating rotator cuff tears of the shoulder.

  20. MCNPX Model/Table Comparison

    CERN Document Server

    Hendricks, J S

    2003-01-01

    MCNPX is a Monte Carlo N-Particle radiation transport code extending the capabilities of MCNP4C. As with MCNP, MCNPX uses nuclear data tables to transport neutrons, photons, and electrons. Unlike MCNP, MCNPX also uses (1) nuclear data tables to transport protons; (2) physics models to transport 30 additional particle types (deuterons, tritons, alphas, pions, muons, etc.); and (3) physics models to transport neutrons and protons when no tabular data are available or when the data are above the energy range (20 to 150 MeV) where the data tables end. MCNPX can mix and match data tables and physics models throughout a problem. For example, MCNPX can model neutron transport in a bismuth germinate (BGO) particle detector by using data tables for bismuth and oxygen and using physics models for germanium. Also, MCNPX can model neutron transport in UO sub 2 , making the best use of physics models and data tables: below 20 MeV, data tables are used; above 150 MeV, physics models are used; between 20 and 150 MeV, data t...

  1. The Periodic Table in Croatia

    Directory of Open Access Journals (Sweden)

    Raos, N.

    2011-12-01

    Full Text Available The Croatian (Yugoslav Academy of Sciences and Arts was the first academy to elect D. I. Mendeleev as its honorary member (1882, whereas the periodic table of the elements has been taught regularly at the Zagreb University since 1888. The early interest of Croatian chemists in the periodic table should be attributed primarily to their pan-Slavic attitude, particularly as proof that Slavic people were able to produce "their own Newtons" (M. V. Lomonosov and D. I. Mendeleev. Such enthusiastic views, however, did not help in analyzing the contribution of Mendeleev and other scientists to the discovery and development of the periodic table of the elements.

  2. Secular stability of rotating stars

    International Nuclear Information System (INIS)

    Imamura, J.N.; Friedman, J.L.; Durisen, R.H.

    1984-01-01

    In this work, the authors calculate the secular stability limits of rotating polytropes to nonaxisymmetric perturbations of low m. Polytropic indices ranging from 1 to 3 and several angular momentum distributions are considered. Results are most conveniently presented in terms of the t-parameter, defined as the ratio of the rotational kinetic energy to the absolute value of the gravitational energy of the fluid. Previous work on polytropes considered only the m = 2 mode, which is unstable for values of the t-parameter greater than 0.14 +- 0.01 for the n values n = 1.5 and 3 and the angular momentum distributions tested (see Durisen and Imamura 1981). The GRR secular stability limit of the m - 2 mode for the Maclaurin spheroids (n = 0) was determined by Chandrasekhar (1970). GRR stability limits of higher m modes for the Maclaurin spheroids were located approximately by Comins (1979a,b) and more precisely by Friedman (1983). 16 references, 2 tables

  3. Ethanol induces rotational behavior in 6-hydroxydopamine lesioned mice

    Energy Technology Data Exchange (ETDEWEB)

    Silverman, P.B.

    1987-03-09

    Mice with unilateal striatal lesions created by 6-hydroxydopamine (6HDA) injection were screened for rotational (circling) behavior in response to injection of amphetamine and apomorphine. Those that rotated ipsilaterally in response to amphetamine and contralaterally in response to apomorphine were subsequently challenged with 1 to 3 g/kg (i.p.) ethanol. Surprisingly, ethanol induced dose related contralateral (apomorphine-like) rotation which, despite gross intoxication, was quite marked in most animals. No significant correlation was found between the number of turns made following ethanol and made after apomorphine or amphetamine. 14 references, 2 figures, 1 table.

  4. Rotating Stars in Relativity

    Directory of Open Access Journals (Sweden)

    Stergioulas Nikolaos

    2003-01-01

    Full Text Available Rotating relativistic stars have been studied extensively in recent years, both theoretically and observationally, because of the information they might yield about the equation of state of matter at extremely high densities and because they are considered to be promising sources of gravitational waves. The latest theoretical understanding of rotating stars in relativity is reviewed in this updated article. The sections on the equilibrium properties and on the nonaxisymmetric instabilities in f-modes and r-modes have been updated and several new sections have been added on analytic solutions for the exterior spacetime, rotating stars in LMXBs, rotating strange stars, and on rotating stars in numerical relativity.

  5. On Averaging Rotations

    DEFF Research Database (Denmark)

    Gramkow, Claus

    1999-01-01

    In this article two common approaches to averaging rotations are compared to a more advanced approach based on a Riemannian metric. Very offten the barycenter of the quaternions or matrices that represent the rotations are used as an estimate of the mean. These methods neglect that rotations belo...... approximations to the Riemannian metric, and that the subsequent corrections are inherient in the least squares estimation. Keywords: averaging rotations, Riemannian metric, matrix, quaternion......In this article two common approaches to averaging rotations are compared to a more advanced approach based on a Riemannian metric. Very offten the barycenter of the quaternions or matrices that represent the rotations are used as an estimate of the mean. These methods neglect that rotations belong...

  6. Automation of BESSY scanning tables

    International Nuclear Information System (INIS)

    Hanton, J.; Kesteman, J.

    1981-01-01

    A micro processor M6800 is used for the automation of scanning and premeasuring BESSY tables. The tasks achieved by the micro processor are: 1. control of spooling of the four asynchronous film winding devices and switching on and off the 4 projections lamps, 2. pre-processing of the data coming from a bi-polar coordinates measuring device, 3. bi-directional interchange of informations between the operator, the BESSY table and the DEC PDP 11/34 mini computer controling the scanning operations, 4. control of the magnification on the table by swapping the projection lenses of appropriate focal lengths and the associated light boxes (under development). In connection with point 4, study is being made for the use of BESSY tables for accurate measurements (+/-5 microns), by encoding the displacements of the projections lenses. (orig.)

  7. The Table Mountain Field Site

    Data.gov (United States)

    Federal Laboratory Consortium — The Table Mountain Field Site, located north of Boulder, Colorado, is designated as an area where the magnitude of strong, external signals is restricted (by State...

  8. The redoubtable ecological periodic table

    Science.gov (United States)

    Ecological periodic tables are repositories of reliable information on quantitative, predictably recurring (periodic) habitat–community patterns and their uncertainty, scaling and transferability. Their reliability derives from their grounding in sound ecological principle...

  9. Table 1: Biofuels simulation scenarios

    Data.gov (United States)

    U.S. Environmental Protection Agency — A spreadsheet containing information used to generate Table 1. Agricultural Market sector results presented in the spreadsheet were generated elsewhere (non-EPA) and...

  10. Effectiveness of MRI in rotator cuff injury

    International Nuclear Information System (INIS)

    Ohazama, Yuka

    1992-01-01

    To investigate the potential role of MR imaging in rotator cuf disorders, normal volunteers and patients with suspected rotator cuff injury were evaluated with a low field permanent magnet unit which had a wide gantry. MR findings of the patients were also compared with arthrography, subcromial bursography and operative findings. To establish optimal imaging technique and normal MR anatomy, 100 normal volunteers were examined. On proton density images, signal intensity of the rotator cuff tendon was low and homogenous, and that of rotator cuff muscles was intermediate. On T2 weighted images, signal intensity of muscles and tendon was decreased and that of joint effusion became brighter. In 38 patients with suspected rotator cuff injury, the signal intensity of the rotator cuff was increased to various degrees. In 21 of them, surgical correction was performed and 17 patients were followed with conservative treatment. MR imaging showed abnormalities in all 38 patients. Arthrography and bursography showed abnormalities in 28 out of 38 patients and 3 of 13 patients respectively. In 21 patients who underwent surgery, tear of the rotator cuff was confirmed, and discrepancies in MR and operative findings existed in 8 patients. In 2 patients, no tear was found in the other examinations, and it was suspected to be horizontal tear or degeneration in the substance of the muscle. MR imaging contributes to diagnosis and treatment planning in patients with suspected rotator cuff injury. (author)

  11. Degenerative full thickness rotator cuff tears : Towards optimal management

    NARCIS (Netherlands)

    Lambers Heerspink, Frederik

    2016-01-01

    The shoulder is one of the most complex joints in the body. Besides a wide range of motion it also has to be stable. The rotator cuff is a major stabiliser of the glenohumoral joint. With increasing age rotator cuff tears are common. Successful treatment is described following surgical (rotator cuff

  12. NNDSS - Table I. infrequently reported notifiable diseases

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table I. infrequently reported notifiable diseases - 2016. In this Table, provisional* cases of selected† infrequently reported notifiable diseases...

  13. Surgical treatment of Lenke 1 thoracic adolescent idiopathic scoliosis with maintenance of kyphosis using the simultaneous double-rod rotation technique.

    Science.gov (United States)

    Sudo, Hideki; Ito, Manabu; Abe, Yuichiro; Abumi, Kuniyoshi; Takahata, Masahiko; Nagahama, Ken; Hiratsuka, Shigeto; Kuroki, Kei; Iwasaki, Norimasa

    2014-06-15

    Retrospective analysis of a prospectively collected, consecutive, nonrandomized series of patients. To assess the surgical outcomes of the simultaneous double-rod rotation technique for treating Lenke 1 thoracic adolescent idiopathic scoliosis (AIS). With the increasing popularity of segmental pedicle screw spinal reconstruction for treating AIS, concerns regarding the limited ability to correct hypokyphosis have also increased. A consecutive series of 32 patients with Lenke 1 main thoracic AIS treated with the simultaneous double-rod rotation technique at our institution was included. Outcome measures included patient demographics, radiographical measurements, and Scoliosis Research Society questionnaire scores. All 32 patients were followed up for a minimum of 2 years (average, 3.6 yr). The average main thoracic Cobb angle correction rate and the correction loss at the final follow-up were 67.8% and 3.3°, respectively. The average preoperative thoracic kyphosis (T5-T12) was 11.9°, which improved significantly to 20.5° (P correction of the main thoracic curve while maintaining sagittal profiles and correcting coronal and axial deformities. 4.

  14. Rotations with Rodrigues' vector

    International Nuclear Information System (INIS)

    Pina, E

    2011-01-01

    The rotational dynamics was studied from the point of view of Rodrigues' vector. This vector is defined here by its connection with other forms of parametrization of the rotation matrix. The rotation matrix was expressed in terms of this vector. The angular velocity was computed using the components of Rodrigues' vector as coordinates. It appears to be a fundamental matrix that is used to express the components of the angular velocity, the rotation matrix and the angular momentum vector. The Hamiltonian formalism of rotational dynamics in terms of this vector uses the same matrix. The quantization of the rotational dynamics is performed with simple rules if one uses Rodrigues' vector and similar formal expressions for the quantum operators that mimic the Hamiltonian classical dynamics.

  15. On Averaging Rotations

    DEFF Research Database (Denmark)

    Gramkow, Claus

    2001-01-01

    In this paper two common approaches to averaging rotations are compared to a more advanced approach based on a Riemannian metric. Very often the barycenter of the quaternions or matrices that represent the rotations are used as an estimate of the mean. These methods neglect that rotations belong ...... approximations to the Riemannian metric, and that the subsequent corrections are inherent in the least squares estimation.......In this paper two common approaches to averaging rotations are compared to a more advanced approach based on a Riemannian metric. Very often the barycenter of the quaternions or matrices that represent the rotations are used as an estimate of the mean. These methods neglect that rotations belong...

  16. Analysis of underlying and multiple-cause mortality data: the life table methods.

    Science.gov (United States)

    Moussa, M A

    1987-02-01

    The stochastic compartment model concepts are employed to analyse and construct complete and abbreviated total mortality life tables, multiple-decrement life tables for a disease, under the underlying and pattern-of-failure definitions of mortality risk, cause-elimination life tables, cause-elimination effects on saved population through the gain in life expectancy as a consequence of eliminating the mortality risk, cause-delay life tables designed to translate the clinically observed increase in survival time as the population gain in life expectancy that would occur if a treatment protocol was made available to the general population and life tables for disease dependency in multiple-cause data.

  17. Mathematical tables tables of in g [z] for complex argument

    CERN Document Server

    Abramov, A A

    1960-01-01

    Mathematical Tables of In ? (z) for Complex Argument is a compilation of tables of In ? (z), z = x + iy, calculated for steps in x and y of 0.01 and with an accuracy of one unit in the last (the sixth) decimal place. Interpolation is used to calculate In ? (z) for intermediate values and is carried out separately for the real and imaginary parts of In ? (z). Six places are retained in interpolation.This book first explains how the values of In ? (z) are calculated using the asymptotic formula in a wide lattice with step h = 0.16, and how the tables and the nomograph are used. The values in the

  18. ROTATIONAL VELOCITIES FOR M DWARFS

    International Nuclear Information System (INIS)

    Jenkins, J. S.; Ramsey, L. W.; Jones, H. R. A.; Pavlenko, Y.; Barnes, J. R.; Pinfield, D. J.; Gallardo, J.

    2009-01-01

    We present spectroscopic rotation velocities (v sin i) for 56 M dwarf stars using high-resolution Hobby-Eberly Telescope High Resolution Spectrograph red spectroscopy. In addition, we have also determined photometric effective temperatures, masses, and metallicities ([Fe/H]) for some stars observed here and in the literature where we could acquire accurate parallax measurements and relevant photometry. We have increased the number of known v sin i values for mid M stars by around 80% and can confirm a weakly increasing rotation velocity with decreasing effective temperature. Our sample of v sin is peak at low velocities (∼3 km s -1 ). We find a change in the rotational velocity distribution between early M and late M stars, which is likely due to the changing field topology between partially and fully convective stars. There is also a possible further change in the rotational distribution toward the late M dwarfs where dust begins to play a role in the stellar atmospheres. We also link v sin i to age and show how it can be used to provide mid-M star age limits. When all literature velocities for M dwarfs are added to our sample, there are 198 with v sin i ≤ 10 km s -1 and 124 in the mid-to-late M star regime (M3.0-M9.5) where measuring precision optical radial velocities is difficult. In addition, we also search the spectra for any significant Hα emission or absorption. Forty three percent were found to exhibit such emission and could represent young, active objects with high levels of radial-velocity noise. We acquired two epochs of spectra for the star GJ1253 spread by almost one month and the Hα profile changed from showing no clear signs of emission, to exhibiting a clear emission peak. Four stars in our sample appear to be low-mass binaries (GJ1080, GJ3129, Gl802, and LHS3080), with both GJ3129 and Gl802 exhibiting double Hα emission features. The tables presented here will aid any future M star planet search target selection to extract stars with low v

  19. Characteristics of Tables for Disseminating Biobehavioral Results.

    Science.gov (United States)

    Schneider, Barbara St Pierre; Nagelhout, Ed; Feng, Du

    2018-01-01

    To report the complexity and richness of study variables within biological nursing research, authors often use tables; however, the ease with which consumers understand, synthesize, evaluate, and build upon findings depends partly upon table design. To assess and compare table characteristics within research and review articles published in Biological Research for Nursing and Nursing Research. A total of 10 elements in tables from 48 biobehavioral or biological research or review articles were analyzed. To test six hypotheses, a two-level hierarchical linear model was used for each of the continuous table elements, and a two-level hierarchical generalized linear model was used for each of the categorical table elements. Additionally, the inclusion of probability values in statistical tables was examined. The mean number of tables per article was 3. Tables in research articles were more likely to contain quantitative content, while tables in review articles were more likely to contain both quantitative and qualitative content. Tables in research articles had a greater number of rows, columns, and column-heading levels than tables in review articles. More than one half of statistical tables in research articles had a separate probability column or had probability values within the table, whereas approximately one fourth had probability notes. Authors and journal editorial staff may be generating tables that better depict biobehavioral content than those identified in specific style guidelines. However, authors and journal editorial staff may want to consider table design in terms of audience, including alternative visual displays.

  20. 30 CFR 250.1401 - Index table.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Index table. 250.1401 Section 250.1401 Mineral... OPERATIONS IN THE OUTER CONTINENTAL SHELF Outer Continental Shelf (OCS) Civil Penalties § 250.1401 Index table. The following table is an index of the sections in this subpart: § 250.1401Table Definitions...

  1. Rotating Reverse-Osmosis for Water Purification

    Science.gov (United States)

    Lueptow, RIchard M.

    2004-01-01

    A new design for a water-filtering device combines rotating filtration with reverse osmosis to create a rotating reverse- osmosis system. Rotating filtration has been used for separating plasma from whole blood, while reverse osmosis has been used in purification of water and in some chemical processes. Reverse- osmosis membranes are vulnerable to concentration polarization a type of fouling in which the chemicals meant not to pass through the reverse-osmosis membranes accumulate very near the surfaces of the membranes. The combination of rotating filtration and reverse osmosis is intended to prevent concentration polarization and thereby increase the desired flux of filtered water while decreasing the likelihood of passage of undesired chemical species through the filter. Devices based on this concept could be useful in a variety of commercial applications, including purification and desalination of drinking water, purification of pharmaceutical process water, treatment of household and industrial wastewater, and treatment of industrial process water. A rotating filter consists of a cylindrical porous microfilter rotating within a stationary concentric cylindrical outer shell (see figure). The aqueous suspension enters one end of the annulus between the inner and outer cylinders. Filtrate passes through the rotating cylindrical microfilter and is removed via a hollow shaft. The concentrated suspension is removed at the end of the annulus opposite the end where the suspension entered.

  2. The Alfonsine tables of Toledo

    CERN Document Server

    Chabás, José

    2003-01-01

    The Alfonsine Tables of Toledo is for historians working in the fields of astronomy, science, the Middle Ages, Spanish and other Romance languages. It is also of interest to scholars interested in the history of Castile, in Castilian-French relations in the Middle Ages and in the history of patronage. It explores the Castilian canons of the Alfonsine Tables and offers a study of their context, language, astronomical content, and diffusion. The Alfonsine Tables of Toledo is unique in that it: includes an edition of a crucial text in history of science; provides an explanation of astronomy as it was practiced in the Middle Ages; presents abundant material on early scientific language in Castilian; presents new material on the diffusion of Alfonsine astronomy in Europe; describes the role of royal patronage of science in a medieval context.

  3. Asteroid rotation rates

    International Nuclear Information System (INIS)

    Binzel, R.P.; Farinella, P.

    1989-01-01

    Within the last decade the data base of asteroid rotation parameters (rotation rates and lightcurve amplitudes) has become sufficiently large to identify some definite rends and properties which can help us to interpret asteroid collisional evolution. Many significant correlations are found between rotation parameters and diameter, with distinct changes occurring near 125 km. The size range, which is also the diameter above which self-gravity may become important, perhaps represents a division between surviving primordial asteroids and collisional fragments. A Maxwellian is able to fit the observed rotation rate distributions of asteroids with D>125 km, implying that their rotation rates may be determined by collisional evolution. Asteroids with D<125 km show an excess of slow rotators and their non-Maxwellian distributions suggests that their rotation rates are more strongly influenced by other processes, such as the distribution resulting from their formation in catastrophic disruption events. Other correlations observed in the data set include different mean rotation rates for C, S and M type asteroids implying that their surface spectra are indicative of bulk properties

  4. The spatial rotator

    DEFF Research Database (Denmark)

    Rasmusson, Allan; Hahn, Ute; Larsen, Jytte Overgaard

    2013-01-01

    This paper presents a new local volume estimator, the spatial rotator, which is based on measurements on a virtual 3D probe, using computer assisted microscopy. The basic design of the probe builds upon the rotator principle which requires only a few manual intersection markings, thus making...

  5. Superconducting rotating machines

    International Nuclear Information System (INIS)

    Smith, J.L. Jr.; Kirtley, J.L. Jr.; Thullen, P.

    1975-01-01

    The opportunities and limitations of the applications of superconductors in rotating electric machines are given. The relevant properties of superconductors and the fundamental requirements for rotating electric machines are discussed. The current state-of-the-art of superconducting machines is reviewed. Key problems, future developments and the long range potential of superconducting machines are assessed

  6. Fundamental Relativistic Rotator

    International Nuclear Information System (INIS)

    Staruszkiewicz, A.

    2008-01-01

    Professor Jan Weyssenhoff was Myron Mathisson's sponsor and collaborator. He introduced a class of objects known in Cracow as '' kreciolki Weyssenhoffa '', '' Weyssenhoff's rotating little beasts ''. The Author describes a particularly simple object from this class. The relativistic rotator described in the paper is such that its both Casimir invariants are parameters rather than constants of motion. (author)

  7. SMAP Faraday Rotation

    Science.gov (United States)

    Le Vine, David

    2016-01-01

    Faraday rotation is a change in the polarization as signal propagates through the ionosphere. At L-band it is necessary to correct for this change and measurements are made on the spacecraft of the rotation angle. These figures show that there is good agreement between the SMAP measurements (blue) and predictions based on models (red).

  8. Units of rotational information

    Science.gov (United States)

    Yang, Yuxiang; Chiribella, Giulio; Hu, Qinheping

    2017-12-01

    Entanglement in angular momentum degrees of freedom is a precious resource for quantum metrology and control. Here we study the conversions of this resource, focusing on Bell pairs of spin-J particles, where one particle is used to probe unknown rotations and the other particle is used as reference. When a large number of pairs are given, we show that every rotated spin-J Bell state can be reversibly converted into an equivalent number of rotated spin one-half Bell states, at a rate determined by the quantum Fisher information. This result provides the foundation for the definition of an elementary unit of information about rotations in space, which we call the Cartesian refbit. In the finite copy scenario, we design machines that approximately break down Bell states of higher spins into Cartesian refbits, as well as machines that approximately implement the inverse process. In addition, we establish a quantitative link between the conversion of Bell states and the simulation of unitary gates, showing that the fidelity of probabilistic state conversion provides upper and lower bounds on the fidelity of deterministic gate simulation. The result holds not only for rotation gates, but also to all sets of gates that form finite-dimensional representations of compact groups. For rotation gates, we show how rotations on a system of given spin can simulate rotations on a system of different spin.

  9. Statistical probability tables CALENDF program

    International Nuclear Information System (INIS)

    Ribon, P.

    1989-01-01

    The purpose of the probability tables is: - to obtain dense data representation - to calculate integrals by quadratures. They are mainly used in the USA for calculations by Monte Carlo and in the USSR and Europe for self-shielding calculations by the sub-group method. The moment probability tables, in addition to providing a more substantial mathematical basis and calculation methods, are adapted for condensation and mixture calculations, which are the crucial operations for reactor physics specialists. However, their extension is limited by the statistical hypothesis they imply. Efforts are being made to remove this obstacle, at the cost, it must be said, of greater complexity

  10. The rotating universe

    International Nuclear Information System (INIS)

    Ruben, G.; Treder, H.J.

    1987-01-01

    For a long time the question whether the universe rotates or not is discussed. Aspects of Huygens, Newton, Mach and other important historical scientists in this field are reported. The investigations of the mathematician Kurt Groedel in order to prove the rotation of the universe are illustrated. Kurt Groedel has shown that Einstein's gravitational equations of general relativity theory and the cosmological postulate of global homogeneity of cosmic matter (that is the Copernical principle) are not contradictionary to a rotating universe. Abberation measurements, position determination by means of radiointerferometry and methods for the determination of the rotation of the universe from the isotropy of the background radiation are presented. From these experiments it can be concluded that the universe seems not to rotate as already Einstein expected

  11. Rotation sensor switch

    International Nuclear Information System (INIS)

    Sevec, J.B.

    1978-01-01

    A protective device to provide a warning if a piece of rotating machinery slows or stops is comprised of a pair of hinged weights disposed to rotate on a rotating shaft of the equipment. When the equipment is rotating, the weights remain in a plane essentially perpendicular to the shaft and constitute part of an electrical circuit that is open. When the shaft slows or stops, the weights are attracted to a pair of concentric electrically conducting disks disposed in a plane perpendicular to the shaft and parallel to the plane of the weights when rotating. A disk magnet attracts the weights to the electrically conducting plates and maintains the electrical contact at the plates to complete an electrical circuit that can then provide an alarm signal

  12. Rotating stars in relativity.

    Science.gov (United States)

    Paschalidis, Vasileios; Stergioulas, Nikolaos

    2017-01-01

    Rotating relativistic stars have been studied extensively in recent years, both theoretically and observationally, because of the information they might yield about the equation of state of matter at extremely high densities and because they are considered to be promising sources of gravitational waves. The latest theoretical understanding of rotating stars in relativity is reviewed in this updated article. The sections on equilibrium properties and on nonaxisymmetric oscillations and instabilities in f -modes and r -modes have been updated. Several new sections have been added on equilibria in modified theories of gravity, approximate universal relationships, the one-arm spiral instability, on analytic solutions for the exterior spacetime, rotating stars in LMXBs, rotating strange stars, and on rotating stars in numerical relativity including both hydrodynamic and magnetohydrodynamic studies of these objects.

  13. SU-F-P-18: Development of the Technical Training System for Patient Set-Up Considering Rotational Correction in the Virtual Environment Using Three-Dimensional Computer Graphic Engine

    International Nuclear Information System (INIS)

    Imura, K; Fujibuchi, T; Hirata, H; Kaneko, K; Hamada, E

    2016-01-01

    Purpose: Patient set-up skills in radiotherapy treatment room have a great influence on treatment effect for image guided radiotherapy. In this study, we have developed the training system for improving practical set-up skills considering rotational correction in the virtual environment away from the pressure of actual treatment room by using three-dimensional computer graphic (3DCG) engine. Methods: The treatment room for external beam radiotherapy was reproduced in the virtual environment by using 3DCG engine (Unity). The viewpoints to perform patient set-up in the virtual treatment room were arranged in both sides of the virtual operable treatment couch to assume actual performance by two clinical staffs. The position errors to mechanical isocenter considering alignment between skin marker and laser on the virtual patient model were displayed by utilizing numerical values expressed in SI units and the directions of arrow marks. The rotational errors calculated with a point on the virtual body axis as the center of each rotation axis for the virtual environment were corrected by adjusting rotational position of the body phantom wound the belt with gyroscope preparing on table in a real space. These rotational errors were evaluated by describing vector outer product operations and trigonometric functions in the script for patient set-up technique. Results: The viewpoints in the virtual environment allowed individual user to visually recognize the position discrepancy to mechanical isocenter until eliminating the positional errors of several millimeters. The rotational errors between the two points calculated with the center point could be efficiently corrected to display the minimum technique mathematically by utilizing the script. Conclusion: By utilizing the script to correct the rotational errors as well as accurate positional recognition for patient set-up technique, the training system developed for improving patient set-up skills enabled individual user to

  14. SU-F-P-18: Development of the Technical Training System for Patient Set-Up Considering Rotational Correction in the Virtual Environment Using Three-Dimensional Computer Graphic Engine

    Energy Technology Data Exchange (ETDEWEB)

    Imura, K [Division of Quantum Radiation Science, Department of Health Science, Graduate School of Medical Science, Kyushu University, Fukuoka (Japan); Fujibuchi, T; Hirata, H [Department of Health Science, Graduate School of Medical Science, Kyushu University, Fukuoka (Japan); Kaneko, K [Innovation Center for Educational Resource, Kyushu University, Fukuoka (Japan); Hamada, E [Cancer Treatment Center, Tobata Kyoritsu Hospital, Kitakyushu (Japan)

    2016-06-15

    Purpose: Patient set-up skills in radiotherapy treatment room have a great influence on treatment effect for image guided radiotherapy. In this study, we have developed the training system for improving practical set-up skills considering rotational correction in the virtual environment away from the pressure of actual treatment room by using three-dimensional computer graphic (3DCG) engine. Methods: The treatment room for external beam radiotherapy was reproduced in the virtual environment by using 3DCG engine (Unity). The viewpoints to perform patient set-up in the virtual treatment room were arranged in both sides of the virtual operable treatment couch to assume actual performance by two clinical staffs. The position errors to mechanical isocenter considering alignment between skin marker and laser on the virtual patient model were displayed by utilizing numerical values expressed in SI units and the directions of arrow marks. The rotational errors calculated with a point on the virtual body axis as the center of each rotation axis for the virtual environment were corrected by adjusting rotational position of the body phantom wound the belt with gyroscope preparing on table in a real space. These rotational errors were evaluated by describing vector outer product operations and trigonometric functions in the script for patient set-up technique. Results: The viewpoints in the virtual environment allowed individual user to visually recognize the position discrepancy to mechanical isocenter until eliminating the positional errors of several millimeters. The rotational errors between the two points calculated with the center point could be efficiently corrected to display the minimum technique mathematically by utilizing the script. Conclusion: By utilizing the script to correct the rotational errors as well as accurate positional recognition for patient set-up technique, the training system developed for improving patient set-up skills enabled individual user to

  15. General relativistic collapse of rotating stars

    International Nuclear Information System (INIS)

    Nakamura, T.

    1984-01-01

    When a rotating star begins to collapse, the gravity becomes so strong that there appears a region from which even a photon cannot escape. After the distortion of space-time is radiated as gravitational waves, a Kerr black hole is formed finally. One of the main goals for numerical relativity is to simulate the collapse of a rotating star under realistic conditions. However, to know both the dynamics of matter and the propagation of gravitational radiation seems to be very difficult. Therefore, in this paper the problem is divided into 4 stages. They are: (1) The time evolution of pure gravitational waves is calculated in a 2-D code. (2) In this stage, the author tries to understand the dynamics of a collapsing, rotating star in 2D code. (3) Combining the techniques from stages 1, 2, the author tries to know both the dynamics of matter and the propagation of gravitational waves generated by the nonspherical motion of matter. (4) The author simulates the gravitational collapse of a rotating star to a black hole in 3D. 25 references, 12 figures, 1 table

  16. Influence of Continuous Table Motion on Patient Breathing Patterns

    International Nuclear Information System (INIS)

    Wilbert, Juergen; Baier, Kurt; Richter, Anne; Herrmann, Christian; Ma Lei; Flentje, Michael; Guckenberger, Matthias

    2010-01-01

    Purpose: To investigate the influence of continuous table motion on patient breathing patterns for compensation of moving targets by a robotic treatment couch. Methods and Materials: Fifteen volunteers were placed on a robotic treatment couch, and the couch was moved on different breathing-correlated and -uncorrelated trajectories. External abdominal breathing motion of the patients was measured using an infrared camera system. The influence of table motion on breathing range and pattern was analyzed. Results: Continuous table motion was tolerated well by all test persons. Volunteers reacted differently to table motion. Four test persons showed no change of breathing range and pattern. Increased irregular breathing was observed in 4 patients; however, irregularity was not correlated with table motion. Only 4 test persons showed an increase in mean breathing amplitude of more than 2mm during motion of the couch. The mean cycle period decreased by more than 1 s for 2 test persons only. No abrupt changes in amplitude or cycle period could be observed. Conclusions: The observed small changes in breathing patterns support the application of motion compensation by a robotic treatment couch.

  17. Free Biceps Tendon Autograft to Augment Arthroscopic Rotator Cuff Repair

    OpenAIRE

    Obma, Padraic R.

    2013-01-01

    Arthroscopic rotator cuff repairs have become the standard of treatment for all sizes of tears over the past several years. Current healing rates reported in the literature are quite good, but improving the healing potential of rotator cuff repairs remains a challenging problem. There has been an increase recently in the use of augmentation of rotator cuff repairs with xenografts or synthetics for large and massive tears. Biceps tenodesis is often indicated as part of the treatment plan while...

  18. Sieving Effect of Sorting Machine with Vibration Table Type on Cacao Pod Based Compost

    Directory of Open Access Journals (Sweden)

    Siswoyo Soekarno

    2009-10-01

    Full Text Available Cacao pod is the biggest part (70% of weight of Cacao, which was not optimaly utilized.Cacao podis one of organic material that can be functioned as an organic fertilizer, such as compost. When utilizedwith right proportion, organic fertilizer is safe for plants and not degrades the soil composition. Compostingprocess is one of utilization form of Cacao pod. The size reduction of cacao pod in the organic fertilizerprocess would help to accelerate the composting process. Smaller particle size would faster interacting withenvironment, so the composting process would be well accelerated if compared to the material with biggersize. Chopping machine of Cacao pod is used to cut the biomass to be small particle in order to be able tobe utilized as some important necessity, i.e. fertilizer or farm animals feed. However, Varies compost sizewas one of the problems faced in the composting process. Therefore, the sorting process was needed tobe done after chopping process, so the compost size became uniform and fulfill the user demand. Thisresearch was aimed at knowing the slope effect of sorting machine and rotation speed (RPM. The methodused in analyzing the results of this research was comparing the treatment factors, which are shown withhistogram. As the super small size of compost recommended for applying in the fertilizing process, so theoptimum treatment combination for having high mass fraction of SS compost grade was achieved at 12oslope of sieve table and 1400 RPM motor rotation speed. As bigger the particle densities of the compostsize as smaller the compost porosity. Mass loss was very low at all treatment combination with the valuearound 0.43-1.33%, so the sieving efficiency can be said very high.

  19. Breakdown concepts for contingency tables

    NARCIS (Netherlands)

    Kuhnt, S.

    2010-01-01

    Loglinear Poisson models are commonly used to analyse contingency tables. So far, robustness of parameter estimators as well as outlier detection have rarely been treated in this context. We start with finite-sample breakdown points. We yield that the breakdown point of mean value estimators

  20. FIRST NEW SOLAR MODELS WITH OPAS OPACITY TABLES

    Energy Technology Data Exchange (ETDEWEB)

    Le Pennec, M.; Turck-Chièze, S.; Salmon, S. [CEA/IRFU/Service d’Astrophysique, CE Saclay, F-91191 Gif sur Yvette (France); Blancard, C.; Cossé, P.; Faussurier, G.; Mondet, G. [CEA, DAM, DIF, F-91297 Arpajon (France)

    2015-11-10

    Stellar seismology appears more and more as a powerful tool for a better determination of the fundamental properties of solar-type stars. However, the particular case of the Sun is still challenging. For about a decade now, the helioseismic sound-speed determination has continued to disagree with the standard solar model (SSM) prediction, questioning the reliability of this model. One of the sources of uncertainty could be in the treatment of the transport of radiation from the solar core to the surface. In this Letter, we use the new OPAS opacity tables, recently available for solar modeling, to address this issue. We discuss first the peculiarities of these tables, then we quantify their impact on the solar sound-speed and density profiles using the reduced OPAS tables taken on the grids of the OPAL ones. We use the two evolution codes, Modules for Experiments in Stellar Astrophysics and Code Liégeois d’Evolution Stellaire, that led to similar conclusions in the solar radiative zone. In comparison to commonly used OPAL opacity tables, the new solar models are computed for the most recent photospheric composition with OPAS tables and present improvements to the location of the base of the convective zone and to the description of the solar radiative zone in comparison to the helioseismic observations, even if the differences in the Rosseland mean opacity do not exceed 6%. We finally carry out a comparison to a solar model computed with the OP opacity tables.

  1. Table mountain observatory support to other programs

    International Nuclear Information System (INIS)

    Harris, A.W.

    1988-01-01

    The Table Mountain Observatory (TMO) facilities include well equipped 24 inch and 16 inch telescopes with a 40 inch telescope (owned by Pomona College) due for completion during FY 89. This proposal is to provide operational support (equipment maintenance, setup, and observing assistnce) at TMO to other programs. The program currently most heavily supported by this grant is the asteroid photometry program directed by A. W. Harris. During 1987, about 20 asteroids were observed, including a near-earth asteroid, 1951 Midas. The photometric observations are used to derive rotation periods, estimate shapes and pole orientations, and to define the phase relations of asteroids. The E class asteroid 64 Angelina was observed, and showed the same opposition spike observed of 44 Jysa, last year. Comet observations are made with the narrow band camera system of David Rees, University College London. Observational support and training was provided to students and faculty from Claremont Colleges for variable star observing programs. Researchers propose to continue the asteroid program, with emphasis on measuring phase relations of low and high albedo asteroids at very low phase angles, and supporting collaborative studies of asteroid shapes

  2. Rotation, Stability and Transport

    Energy Technology Data Exchange (ETDEWEB)

    Connor, J. W.

    2007-07-01

    Tokamak plasmas can frequently exhibit high levels of rotation and rotation shear. This can usually be attributed to various sources: injection of momentum, e.g. through neutral beams, flows driven by plasma gradients or torques resulting from non-ambipolar particle loss; however, the source sometimes remains a mystery, such as the spontaneous rotation observed in Ohmic plasmas. The equilibrium rotation profile is given by the balance of these sources with transport and other losses; the edge boundary conditions can play an important role in determining this profile . Such plasma rotation, particularly sheared rotation, is predicted theoretically to have a significant influence on plasma behaviour. In the first place, sonic flows can significantly affect tokamak equilibria and neoclassical transport losses. However, the influence of rotation on plasma stability and turbulence is more profound. At the macroscopic level it affects the behaviour of the gross MHD modes that influence plasma operational limits. This includes sawteeth, the seeding of neoclassical tearing modes, resistive wall modes and the onset of disruptions through error fields, mode locking and reconnection. At the microscopic level it has a major effect on the stability of ballooning modes, both ideal MHD and drift wave instabilities such as ion temperature gradient (ITG) modes. In the non-linear state, as unstable drift waves evolve into turbulent structures, sheared rotation also tears apart eddies, thereby reducing the resulting transport. There is considerable experimental evidence for these effects on both MHD stability and plasma confinement. In particular, the appearance of improved confinement modes with transport barriers, such as edge H-mode barriers and internal transport barriers (ITBs) appears to correlate well with the presence of sheared plasma rotation. This talk will describe the theory underlying some of these phenomena involving plasma rotation, on both macroscopic and microscopic

  3. On Job Rotation

    OpenAIRE

    Metin M. Cosgel; Thomas J. Miceli

    1998-01-01

    A fundamental principle of economics with which Adam Smith begins The Wealth of Nations is the division of labor. Some firms, however, have been pursuing a practice called job rotation, which assigns each worker not to a single and specific task but to a set of several tasks among which he or she rotates with some frequency. We examine the practice of job rotation as a serious alternative to specialization, with three objectives. The first is to consider current and historical examples of job...

  4. Rotational radiotherapy for prostate cancer in clinical practice

    DEFF Research Database (Denmark)

    Aznar, Marianne C; Petersen, Peter Meidahl; Logadottir, Ashildur

    2010-01-01

    Radiotherapy is the standard treatment in locally advanced prostate cancer. The latest technological improvement is modulated rotational radiotherapy, where one single rotation of the treatment machine is used to conform the dose delivery to the target and spare organs at risk, requiring less than...

  5. Rotator cuff - self-care

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000358.htm Rotator cuff - self-care To use the sharing features on ... and shoulder exercises may help ease your symptoms. Rotator Cuff Problems Common rotator cuff problems include: Tendinitis , which ...

  6. US-guided percutaneous treatment and physical therapy in rotator cuff calcific tendinopathy of the shoulder: outcome at 3 and 12 months.

    Science.gov (United States)

    Pasquotti, Giulio; Faccinetto, Alex; Marchioro, Umberto; Todisco, Matteo; Baldo, Vincenzo; Cocchio, Silvia; De Conti, Giorgio

    2016-08-01

    To monitor the results of ultrasound (US)-guided percutaneous treatment of calcific tendinopathy of the shoulder at 12 months (T12) after treatment (T0). To verify the possible relations between some pre- and post-procedural variables with the clinical outcome at T12. Forty-seven patients (26 female and 21 male) were enrolled in the study. Patients' approval and written informed consent were obtained. Symptoms were assessed by Constant Shoulder Score (CSS) at T0 and T12. Thirty of these also underwent a CSS control at 3 months (T3). The treatment efficacy was statistically tested for relation with location and type of calcification, characteristics of the tendon and subdeltoid bursa, impingement, and rehabilitation treatments. There was a significant increase in the average CSS value between T0 and T12 (40.7 vs. 75.3). The variables analysed did not show a statistically significant effect on the outcome at T12. A link was noticed only between patients' increasing age and score improvement, particularly among female subjects. US-guided treatment of calcific tendonitis is a viable therapeutic option. No pre- or intra-procedural parameters emerged which might help in predicting the outcome, apart from patients' needs in everyday life. • US-guided tcreatment of shoulder calcific tendinopathy is an excellent therapeutic option • Long-term results seem greatly affected by patients' features and needs in everyday life • No proven pre- or intra-procedural parameters emerged that might predict the outcome.

  7. A new approach to defining rotation ages on the basis of productive and technological aspects. Application to natural Pinus sylvestris L. stands in Central Spain

    International Nuclear Information System (INIS)

    Rojo-Alboreca, A.; García-Villabrille, J.D.; Corral-Rivas, J.J.; Alía, R.; Montero, G.

    2017-01-01

    Aim of study: To propose a new approach to defining rotation ages on the basis of productive and technological aspects and to present an example of application of the methodology to natural Pinus sylvestris stands in relation to silvicultural treatment (light or heavy thinning) and site index. Area of study: Central Spain. Material and methods: We assumed that the price per m3 of logwood suitable for veneer is four times higher than logwood not apt for veneer. Considering the yield distribution for different technological and commercial classes, a model of diameter distributions and yield tables, the variation in an average price index for different age classes, site indexes and silvicultural treatments was calculated. The age at which the price index rises by less than 3%, the proportion of trees with d.b.h. higher than 40 cm, and other aspects such as the possible presence of fungal decay in old-growth stands were also taken into account to establish three criteria for defining rotation ages. Main results: The proposed methodology generates a wide range of rotation ages between 100 and 140 years for lightly thinned stands, and between 90 and 140 years for heavily thinned stands, depending on the site index. Research highlights: The proposed approach is based on technological and productive criteria, with the limitations imposed by sanitary risks. The methodology can be applied to generate rotation ages in relation to different site indexes and silvicultural treatments, provided that the timber market prices and the yield distribution for different technological and commercial classes are known, and that a model of diameter distributions and yield tables are available.

  8. A new approach to defining rotation ages on the basis of productive and technological aspects. Application to natural Pinus sylvestris L. stands in Central Spain

    Energy Technology Data Exchange (ETDEWEB)

    Rojo-Alboreca, A.; García-Villabrille, J.D.; Corral-Rivas, J.J.; Alía, R.; Montero, G.

    2017-11-01

    Aim of study: To propose a new approach to defining rotation ages on the basis of productive and technological aspects and to present an example of application of the methodology to natural Pinus sylvestris stands in relation to silvicultural treatment (light or heavy thinning) and site index. Area of study: Central Spain. Material and methods: We assumed that the price per m3 of logwood suitable for veneer is four times higher than logwood not apt for veneer. Considering the yield distribution for different technological and commercial classes, a model of diameter distributions and yield tables, the variation in an average price index for different age classes, site indexes and silvicultural treatments was calculated. The age at which the price index rises by less than 3%, the proportion of trees with d.b.h. higher than 40 cm, and other aspects such as the possible presence of fungal decay in old-growth stands were also taken into account to establish three criteria for defining rotation ages. Main results: The proposed methodology generates a wide range of rotation ages between 100 and 140 years for lightly thinned stands, and between 90 and 140 years for heavily thinned stands, depending on the site index. Research highlights: The proposed approach is based on technological and productive criteria, with the limitations imposed by sanitary risks. The methodology can be applied to generate rotation ages in relation to different site indexes and silvicultural treatments, provided that the timber market prices and the yield distribution for different technological and commercial classes are known, and that a model of diameter distributions and yield tables are available.

  9. Rotating universe models

    International Nuclear Information System (INIS)

    Tozini, A.V.

    1984-01-01

    A review is made of some properties of the rotating Universe models. Godel's model is identified as a generalized filted model. Some properties of new solutions of the Einstein's equations, which are rotating non-stationary Universe models, are presented and analyzed. These models have the Godel's model as a particular case. Non-stationary cosmological models are found which are a generalization of the Godel's metrics in an analogous way in which Friedmann is to the Einstein's model. (L.C.) [pt

  10. Rotation Invariance Neural Network

    OpenAIRE

    Li, Shiyuan

    2017-01-01

    Rotation invariance and translation invariance have great values in image recognition tasks. In this paper, we bring a new architecture in convolutional neural network (CNN) named cyclic convolutional layer to achieve rotation invariance in 2-D symbol recognition. We can also get the position and orientation of the 2-D symbol by the network to achieve detection purpose for multiple non-overlap target. Last but not least, this architecture can achieve one-shot learning in some cases using thos...

  11. Rotating relativistic neutron stars

    Energy Technology Data Exchange (ETDEWEB)

    Weber, F.; Glendenning, N.K.

    1991-07-21

    Models of rotating neutron stars are constructed in the framework of Einstein's theory of general relativity. For this purpose a refined version of Hartle's method is applied. The properties of these objects, e.g. gravitational mass, equatorial and polar radius, eccentricity, red- and blueshift, quadrupole moment, are investigated for Kepler frequencies of 4000 s{sup {minus}1} {le} {Omega}{sub K} {le} 9000 s{sup {minus}1}. Therefore a self-consistency problem inherent in the determination of {Omega}{sub K} must be solved. The investigation is based on neutron star matter equations of state derived from the relativistic Martin-Schwinger hierarch of coupled Green's functions. By means of introducing the Hartree, Hartree-Fock, and ladder ({Lambda}) approximations, models of the equation of state derived. A special feature of the latter approximation scheme is the inclusion of dynamical two-particle correlations. These have been calculated from the relativistic T-matrix applying both the HEA and Bonn meson-exchange potentials of the nucleon-nucleon force. The nuclear forces of the former two treatments are those of the standard scalar-vector-isovector model of quantum hadron dynamics, with parameters adjusted to the nuclear matter data. An important aspect of this work consists in testing the compatibility of different competing models of the nuclear equation of state with data on pulsar periods. By this the fundamental problem of nuclear physics concerning the behavior of the equation of state at supernuclear densities can be treated.

  12. MO-FG-CAMPUS-TeP2-05: Optimizing Stereotactic Radiosurgery Treatment of Multiple Brain Metastasis Lesions with Individualized Rotational Arc Trajectories

    International Nuclear Information System (INIS)

    Dong, P; Xing, L; Ma, L

    2016-01-01

    Purpose: Radiosurgery of multiple (n>4) brain metastasis lesions requires 3–4 noncoplanar VMAT arcs with excessively high monitor units and long delivery time. We investigated whether an improved optimization technique would decrease the needed arc numbers and increase the delivery efficiency, while improving or maintaining the plan quality. Methods: The proposed 4pi arc space optimization algorithm consists of two steps: automatic couch angle selection followed by aperture generation for each arc with optimized control points distribution. We use a greedy algorithm to select the couch angles. Starting from a single coplanar arc plan we search through the candidate noncoplanar arcs to pick a single noncoplanar arc that will bring the best plan quality when added into the existing treatment plan. Each time, only one additional noncoplanar arc is considered making the calculation time tractable. This process repeats itself until desired number of arc is reached. The technique is first evaluated in coplanar arc delivery scheme with testing cases and then applied to noncoplanar treatments of a case with 12 brain metastasis lesions. Results: Clinically acceptable plans are created within minutes. For the coplanar testing cases the algorithm yields singlearc plans with better dose distributions than that of two-arc VMAT, simultaneously with a 12–17% reduction in the delivery time and a 14–21% reduction in MUs. For the treatment of 12 brain mets while Paddick conformity indexes of the two plans were comparable the SCG-optimization with 2 arcs (1 noncoplanar and 1 coplanar) significantly improved the conventional VMAT with 3 arcs (2 noncoplanar and 1 coplanar). Specifically V16 V10 and V5 of the brain were reduced by 11%, 11% and 12% respectively. The beam delivery time was shortened by approximately 30%. Conclusion: The proposed 4pi arc space optimization technique promises to significantly reduce the brain toxicity while greatly improving the treatment efficiency.

  13. MO-FG-CAMPUS-TeP2-05: Optimizing Stereotactic Radiosurgery Treatment of Multiple Brain Metastasis Lesions with Individualized Rotational Arc Trajectories

    Energy Technology Data Exchange (ETDEWEB)

    Dong, P; Xing, L [Stanford University School of Medicine, Stanford, CA (United States); Ma, L [UCSF Comprehensive Cancer Center, San Francisco, CA (United States)

    2016-06-15

    Purpose: Radiosurgery of multiple (n>4) brain metastasis lesions requires 3–4 noncoplanar VMAT arcs with excessively high monitor units and long delivery time. We investigated whether an improved optimization technique would decrease the needed arc numbers and increase the delivery efficiency, while improving or maintaining the plan quality. Methods: The proposed 4pi arc space optimization algorithm consists of two steps: automatic couch angle selection followed by aperture generation for each arc with optimized control points distribution. We use a greedy algorithm to select the couch angles. Starting from a single coplanar arc plan we search through the candidate noncoplanar arcs to pick a single noncoplanar arc that will bring the best plan quality when added into the existing treatment plan. Each time, only one additional noncoplanar arc is considered making the calculation time tractable. This process repeats itself until desired number of arc is reached. The technique is first evaluated in coplanar arc delivery scheme with testing cases and then applied to noncoplanar treatments of a case with 12 brain metastasis lesions. Results: Clinically acceptable plans are created within minutes. For the coplanar testing cases the algorithm yields singlearc plans with better dose distributions than that of two-arc VMAT, simultaneously with a 12–17% reduction in the delivery time and a 14–21% reduction in MUs. For the treatment of 12 brain mets while Paddick conformity indexes of the two plans were comparable the SCG-optimization with 2 arcs (1 noncoplanar and 1 coplanar) significantly improved the conventional VMAT with 3 arcs (2 noncoplanar and 1 coplanar). Specifically V16 V10 and V5 of the brain were reduced by 11%, 11% and 12% respectively. The beam delivery time was shortened by approximately 30%. Conclusion: The proposed 4pi arc space optimization technique promises to significantly reduce the brain toxicity while greatly improving the treatment efficiency.

  14. Fluctuation analysis of rotational spectra

    International Nuclear Information System (INIS)

    Doessing, T.; Bracco, A.; Broglia, R.A.; Matsuo, M.

    1996-01-01

    The compound state rotational degree of freedom is ''damped'' in the sense that the electric quadrupole decay of a single quantum state with angular momentum I exhibits a spectrum of final states all having spin I-2. In actual experiments, the cascade of γ-rays associated with each of the members of the ensemble of compound nuclei uses each of the ''discrete'' transitions many more times than the ''continuum'' transitions. Relatively large and small fluctuations in the recorded coincidence spectrum ensue, respectively. The analysis of the fluctuations will be shown to be instrumental to gain insight into the phenomenon of rotational damping. For this purpose, two- and higher-fold coincidence spectra emitted from rotating nuclei are analyzed with respect to the count fluctuations. The coincidences from consecutive γ-rays emitted from discrete rotational bands generate ridges in the E γ1 .E γ2 spectrum, and the fluctuation analysis of the ridges is based upon the ansatz of a random selection of transition energies from band to band. This ansatz is supported by a cranked mean-field calculation for the nucleus 168 Yb, as well as by analyzing resolved bands in 168 Yb and its neighbors. The fluctuation analysis of the central valley (E γ1 =E γ2 ) is based upon the ansatz of fluctuations in the intensity of the transitions of Porter-Thomas type superposed on a smooth spectrum of transition energies. This ansatz is again supported by a mixed-band calculation. The mathematical treatment of count fluctuations is formulated in general (orig.)

  15. Superconductivity and the Periodic Table

    International Nuclear Information System (INIS)

    Chapnik, I.M.

    1985-01-01

    In view of the inability of the present theory of superconductivity to make reliable predictions for the magnitude of Tsub(c) it seems useful to search for empirical relationships between the composition of the compound and the Tsub(c) value. Table I gives a list of the available Tsub(c) data for transition metals (TM) having from 3 to 9 outer electrons and Tsub(c) data for non-transition elements (NTE) of groups IIB, IIIB and IVB, including data for amorphous (Am) structures and structures (marked by triangles) obtained at high pressures. The analogous metals have therefore the same structure. In Tables II to IV the Tsub(c) data are presented for analogous compounds of NTE from IB - VIB group. Conclusions are presented. (author)

  16. 26 CFR 1.469-0 - Table of contents.

    Science.gov (United States)

    2010-04-01

    ...) Regroupings. (f) Grouping by Commissioner to prevent tax avoidance. (1) Rule. (2) Example. (g) Treatment of... Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Taxable Year for Which Deductions Taken § 1.469-0 Table of contents. This section lists the...

  17. Nitrogen Uptake in Soils under Different Water Table Depths ...

    African Journals Online (AJOL)

    A mathematical model was used to examine the interactions of NH4 + transport to rice roots, as well as to calculate root length densities required to relate N uptake to concentrations of NH4 + in solution around the rooting medium for three water treatments: water table 30 cm below the surface, 15 cm below the surface and ...

  18. Periodic Burning In Table Mountain-Pitch Pine Stands

    Science.gov (United States)

    Russell B. Randles; David H. van Lear; Thomas A. Waldrop; Dean M. Simon

    2002-01-01

    Abstract - The effects of multiple, low intensity burns on vegetation and wildlife habitat in Table Mountain (Pinus pungens Lamb.)-pitch (Pinus rigida Mill.) pine communities were studied in the Blue Ridge Mountains of North Carolina. Treatments consisted of areas burned from one to four times at 3-4 year...

  19. Magnetorotational Instability in a Rotating Liquid Metal Annulus

    International Nuclear Information System (INIS)

    Hantao Ji; Jeremy Goodman; Akira Kageyama

    2001-01-01

    Although the magnetorotational instability (MRI) has been widely accepted as a powerful accretion mechanism in magnetized accretion disks, it has not been realized in the laboratory. The possibility of studying MRI in a rotating liquid-metal annulus (Couette flow) is explored by local and global stability analysis and magnetohydrodynamic (MHD) simulations. Stability diagrams are drawn in dimensionless parameters, and also in terms of the angular velocities at the inner and outer cylinders. It is shown that MRI can be triggered in a moderately rapidly rotating table-top apparatus, using easy-to-handle metals such as gallium. Practical issues of this proposed experiment are discussed

  20. NNDSS - Table I. infrequently reported notifiable diseases

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table I. infrequently reported notifiable diseases - 2017. In this Table, provisional cases of selected infrequently reported notifiable diseases (<1,000...

  1. NNDSS - Table I. infrequently reported notifiable diseases

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table I. infrequently reported notifiable diseases - 2014.In this Table, provisional cases of selected infrequently reported notifiable diseases (<1,000...

  2. NNDSS - Table I. infrequently reported notifiable diseases

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table I. infrequently reported notifiable diseases - 2015. In this Table, provisional cases of selected infrequently reported notifiable diseases (<1,000...

  3. NNDSS - Table I. infrequently reported notifiable diseases

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table I. infrequently reported notifiable diseases - 2018. In this Table, provisional cases of selected infrequently reported notifiable diseases (<1,000...

  4. Toddlers at the Table: Avoiding Power Struggles

    Science.gov (United States)

    ... Search English Español Toddlers at the Table: Avoiding Power Struggles KidsHealth / For Parents / Toddlers at the Table: ... common concerns into opportunities to teach healthy eating habits. Most Toddlers Are Picky Eaters Many toddlers express ...

  5. NNDSS - Table II. Babesiosis to Campylobacteriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2018. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  6. NNDSS - Table II. Cryptosporidiosis to Dengue

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Cryptosporidiosis to Dengue - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  7. NNDSS - Table II. Cryptosporidiosis to Dengue

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Cryptosporidiosis to Dengue - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the preceding...

  8. NNDSS - Table II. Shiga toxin to Shigellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Shiga toxin to Shigellosis - 2015. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  9. NNDSS - Table II. West Nile virus disease

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. West Nile virus disease - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year),...

  10. Handbook of thermodynamic tables and charts

    International Nuclear Information System (INIS)

    Raznjevic, K.

    1976-01-01

    A compilation of thermodynamic and thermophysical tables and charts is presented. Numerical values are cited in both technical and SI units. Solid, liquid, vapor, and gaseous forms of organic and inorganic materials are included. 12 figures, 137 tables

  11. Global Reference Tables for Management Information Systems

    Data.gov (United States)

    Social Security Administration — This database is a collection of reference tables that store common information used throughout SSA. These tables standardize code structures and code usage of SSA...

  12. NNDSS - Table II. Mumps to Rabies, animal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Mumps to Rabies, animal - 2014.In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000 cases but...

  13. NNDSS - Table II. Mumps to Rabies, animal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Mumps to Rabies, animal - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year),...

  14. NNDSS - Table II. Mumps to Rabies, animal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Mumps to Rabies, animal - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the preceding...

  15. NNDSS - Table II. Legionellosis to Malaria

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Legionellosis to Malaria - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  16. NNDSS - Table II. Hepatitis (viral, acute) C

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Hepatitis (viral, acute) C - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  17. NNDSS - Table II. Babesiosis to Campylobacteriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  18. NNDSS - Table II. West Nile virus disease

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. West Nile virus disease - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year),...

  19. NNDSS - Table II. Giardiasis to Haemophilus influenza

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Giardiasis to Haemophilus influenza - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  20. NNDSS - Table II. Meningococcal to Pertussis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Meningococcal to Pertussis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  1. NNDSS - Table II. Ehrlichiosis and Anaplasmosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Ehrlichiosis and Anaplasmosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  2. NNDSS - Table II. Cryptosporidiosis to Dengue

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Cryptosporidiosis to Dengue - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  3. NNDSS - Table II. Tetanus to Varicella

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Tetanus to Varicella - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year),...

  4. NNDSS - Table II. Chlamydia to Coccidioidomycosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Chlamydia to Coccidioidomycosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  5. NNDSS - Table II. Salmonellosis to Shigellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Salmonellosis to Shigellosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  6. NNDSS - Table II. West Nile to Zika

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. West Nile to Zika - 2018. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year), and...

  7. NNDSS - Table II. Babesiosis to Coccidioidomycosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Coccidioidomycosis - 2014.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  8. Global Reference Tables for Production Systems

    Data.gov (United States)

    Social Security Administration — This database is a collection of reference tables that store common information used throughout SSA. These tables standardized code structures and code usage of SSA...

  9. NNDSS - Table II. Giardiasis to Haemophilus influenza

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Giardiasis to Haemophilus influenza - 2014. In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000...

  10. NNDSS - Table II. Giardiasis to Haemophilus influenza

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Giardiasis to Haemophilus influenza - 2018. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  11. NNDSS - Table II. Giardiasis to Haemophilus influenza

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Giardiasis to Haemophilus influenza - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  12. NNDSS - Table II. Giardiasis to Haemophilus influenza

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Giardiasis to Haemophilus influenza - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the...

  13. NNDSS - Table II. Hepatitis (viral, acute)

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Hepatitis (viral, acute) - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year),...

  14. NNDSS - Table II. Hepatitis (viral, acute)

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Hepatitis (viral, acute) - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the preceding...

  15. NNDSS - Table II. Hepatitis (viral, acute)

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Hepatitis (viral, acute) - 2014.In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000 cases but...

  16. NNDSS - Table II. Meningococcal disease to Pertussis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Meningococcal disease to Pertussis - 2018. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  17. NNDSS - Table II. Chlamydia to Coccidioidomycosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Chlamydia to Coccidioidomycosis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the...

  18. NNDSS - Table II. Tetanus to Varicella

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Tetanus to Varicella - 2018. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year),...

  19. NNDSS - Table II. Invasive Pneumococcal to Legionellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Invasive Pneumococcal to Legionellosis - 2014.In this Table, all conditions with a 5-year average annual national total of more than or equals...

  20. Stream Tables and Watershed Geomorphology Education.

    Science.gov (United States)

    Lillquist, Karl D.; Kinner, Patricia W.

    2002-01-01

    Reviews copious stream tables and provides a watershed approach to stream table exercises. Results suggest that this approach to learning the concepts of fluvial geomorphology is effective. (Contains 39 references.) (DDR)

  1. NNDSS - Table II. Legionellosis to Malaria

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Legionellosis to Malaria - 2018. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  2. NNDSS - Table II. Lyme disease to Meningococcal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Lyme disease to Meningococcal - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  3. NNDSS - Table II. Lyme disease to Meningococcal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Lyme disease to Meningococcal - 2014In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000 cases...

  4. NNDSS - Table II. Lyme disease to Meningococcal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Lyme disease to Meningococcal - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the...

  5. NNDSS - Table II. Salmonellosis to Shigellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Salmonellosis to Shigellosis - 2014.In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000 cases...

  6. NNDSS - Table II. West Nile virus disease

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. West Nile virus disease - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the preceding...

  7. NNDSS - Table II. Rubella to Salmonellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Rubella to Salmonellosis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the preceding...

  8. NNDSS - Table II. Ehrlichiosis/Anaplasmosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Ehrlichiosis/Anaplasmosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  9. NNDSS - Table II. Tetanus to Vibriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Tetanus to Vibriosis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the preceding year),...

  10. NNDSS - Table II. Shiga toxin to Shigellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Shiga toxin to Shigellosis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the preceding...

  11. NNDSS - Table II. Babesiosis to Campylobacteriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the...

  12. NNDSS - Table II. Babesiosis to Campylobacteriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  13. NNDSS - Table II. Rubella to Salmonellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Rubella to Salmonellosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year),...

  14. NNDSS - Table II. Tetanus to Vibriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Tetanus to Vibriosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year), and...

  15. NNDSS - Table II. Chlamydia to Coccidioidomycosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Chlamydia to Coccidioidomycosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  16. NNDSS - Table II. Ehrlichiosis/Anaplasmosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Ehrlichiosis/Anaplasmosis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the preceding...

  17. NNDSS - Table II. Invasive Pneumococcal to Legionellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Invasive Pneumococcal to Legionellosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  18. NNDSS - Table II. Invasive Pneumococcal to Legionellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Invasive Pneumococcal to Legionellosis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the...

  19. [Comparative study of proximal femoral shortening after the third generation of Gamma nail versus proximal femoral nail anti-rotation in treatment of intertrochanteric fracture].

    Science.gov (United States)

    Hou, Yu; Yao, Qi; Zhang, Gen'ai; Ding, Lixiang

    2018-03-01

    To explore the difference of the proximal femoral shortening (PFS) between the third generation of Gamma nail (TGN) and the proximal femoral nail anti-rotation (PFNA) in treating intertrochanteric fracture of femur. The clinical data of 158 patients with intertrochanteric fracture of femur who were treated with TGN internal fixation or PFNA internal fixation between January 2014 and December 2015 were retrospectively analysed. The patients were divided into TGN group (69 cases) and PFNA group (89 cases) according to surgical operation. There was no significant difference in gender, age, bone mineral density, causes of injury, AO/Association for the Study of Internal Fixation (AO/ASIF) classification, accompanied disease, and the time from injury to operation between 2 groups ( P >0.05). The result of fracture reduction was divided into 3 types: positive medial cortex support, neutral position cortex support, and negative medial cortex support according to the method of Chang et al . At 18 months postoperatively, bilateral hip anteroposterior X-ray films were taken to measure horizontal PFS values (marked as X), vertical PFS values (marked as Y), and calculate the total PFS values (marked as Z). The PFS values were divided into 4 grades according to the criteria (≤1.0 mm, 1.0-4.9 mm, 5.0-9.9 mm, and ≥10.0 mm), and the constituent ratio was calculated and compared between 2 groups. The X, Y, and Z values and the collodiaphyseal angles of 2 groups at 18 months postoperatively were compared. The X, Y, and Z values of 2 groups of patients with failed fixation and normal healing within 18 months after operation were recorded and compared. The X, Y, and Z values of 2 groups of the patients with different cortex support types were also compared. There were 34 cases of positive medial cortex support, 30 cases of neutral position cortex support, and 5 cases of negative medial cortex support in TGN group, and there were 45, 33, and 11 cases in PFNA group respectively

  20. Intra-pulp temperature increase of equine cheek teeth during treatment with motorized grinding systems : influence of grinding head position and rotational speed

    OpenAIRE

    Haeussler, Silvia; Luepke, Matthias; Seifert, Hermann; Staszyk, Carsten

    2014-01-01

    BACKGROUND: In equine practice, teeth corrections by means of motorized grinding systems are standard procedure. The heat resulting from that treatment may cause irreparable damage to the dental pulp. It has been shown that a 5.5degreesC temperature rise may cause severe destruction in pulp cells. Hence, the capability to continuously form secondary dentine is lost, and may lead, due to equine-typical occlusal tooth abrasion, to an opening of the pulp cavity.To obtain reliable data on the int...

  1. MRI of the rotator cuff and internal derangement

    Energy Technology Data Exchange (ETDEWEB)

    Opsha, Oleg [Department of Radiology, Maimonides Medical Center, 4802 10th Avenue, Brooklyn, NY 11219 (United States)], E-mail: oopsha@hotmail.com; Malik, Archana [Department of Radiology, Maimonides Medical Center, 4802 10th Avenue, Brooklyn, NY 11219 (United States)], E-mail: dr.armal@gmail.com; Baltazar, Romulo [Department of Radiology, Maimonides Medical Center, 4802 10th Avenue, Brooklyn, NY 11219 (United States)], E-mail: rbaltazar@gmail.com; Primakov, Denis [Department of Radiology, North Shore University Hospital, 300 Community Drive, Manhasset, NY 11030 (United States)], E-mail: dgprim@yahoo.com; Beltran, Salvador [Dr. Ramon Marti, 2 Albons, Ginrona 17136 (Spain); Miller, Theodore T. [Department of Radiology and Imaging, Hospital for Special Surgery, 535 East 70th Street, New York, NY 10021 (United States)], E-mail: MillerTT@hss.edu; Beltran, Javier [Department of Radiology, Maimonides Medical Center, 4802 10th Avenue, Brooklyn, NY 11219 (United States)], E-mail: jbeltran46@msn.com

    2008-10-15

    Disease to the rotator cuff is the most common cause of shoulder pain and dysfunction in adults. This group of muscles performs multiple functions and is often stressed during various activities. The anatomy and physiology of the rotator cuff is complex and interconnected to other muscle groups in the shoulder. One must take the anatomic status of the rotator cuff tendons into account when planning the treatment of the rotator cuff injury. Diagnostic imaging of the rotator cuff, performed by MRI, provides valuable information about the nature of the injury. In this article, we will review the various types and causes of rotator cuff injuries, normal MR anatomy, function, patho-anatomy, and the biomechanics of the rotator cuff. We will also review shoulder impingement syndromes.

  2. MRI of the rotator cuff and internal derangement

    International Nuclear Information System (INIS)

    Opsha, Oleg; Malik, Archana; Baltazar, Romulo; Primakov, Denis; Beltran, Salvador; Miller, Theodore T.; Beltran, Javier

    2008-01-01

    Disease to the rotator cuff is the most common cause of shoulder pain and dysfunction in adults. This group of muscles performs multiple functions and is often stressed during various activities. The anatomy and physiology of the rotator cuff is complex and interconnected to other muscle groups in the shoulder. One must take the anatomic status of the rotator cuff tendons into account when planning the treatment of the rotator cuff injury. Diagnostic imaging of the rotator cuff, performed by MRI, provides valuable information about the nature of the injury. In this article, we will review the various types and causes of rotator cuff injuries, normal MR anatomy, function, patho-anatomy, and the biomechanics of the rotator cuff. We will also review shoulder impingement syndromes

  3. On Importance of Rows for Decision Tables

    KAUST Repository

    AbouEisha, Hassan M.; Azad, Mohammad; Moshkov, Mikhail

    2017-01-01

    In this paper, we propose a method for the evaluation of importance of rows for decision tables. It is based on indirect information about changes in the set of reducts after removing the considered row from the table. We also discuss results of computer experiments with decision tables from UCI Machine Learning Repository.

  4. 21 CFR 890.3750 - Mechanical table.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mechanical table. 890.3750 Section 890.3750 Food... DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Prosthetic Devices § 890.3750 Mechanical table. (a) Identification. A mechanical table is a device intended for medical purposes that has a flat surface that can be...

  5. On Importance of Rows for Decision Tables

    KAUST Repository

    AbouEisha, Hassan M.

    2017-06-21

    In this paper, we propose a method for the evaluation of importance of rows for decision tables. It is based on indirect information about changes in the set of reducts after removing the considered row from the table. We also discuss results of computer experiments with decision tables from UCI Machine Learning Repository.

  6. The Different Periodic Tables of Dmitrii Mendeleev

    Science.gov (United States)

    Laing, Michael

    2008-01-01

    Between 1869 and 1905 the Russian chemist Dmitrii Mendeleev published several tables with different arrangements of the chemical elements. Four of these are compared with periodic tables by Russian scientists from 1934 and 1969. The difficulties caused by the lanthanoid elements are clearly seen in the table of 1905, which satisfactorily includes…

  7. Cohort Working Life Tables for Older Canadians

    Directory of Open Access Journals (Sweden)

    Frank T. Denton

    2010-12-01

    those based on the period tables, for both men and women, and that is reflected in increased retirement expectancies. For example, a male aged 50 in 1976 could have expected to live three years longer and to have almost four more years in retirement, based on the male cohort table under medium assumptions, as compared with the corresponding period table.

  8. Tilt table standing for reducing spasticity after spinal cord injury.

    Science.gov (United States)

    Bohannon, R W

    1993-10-01

    A patient with a T12 spinal cord injury and intractable extensor spasms of the lower extremities participated in tilt table standing trial on 5 nonconsecutive days to determine if the intervention would affect his spasticity and spasms. Each day's standing trial was followed by an immediate reduction in lower extremity spasticity (measured using the modified Ashworth scale and pendulum testing). Standing was also accompanied by a reduction in spasms that lasted until the following morning. The reduction of spasms was particularly advantageous to the performance of car transfers. Tilt table standing merits further examination as a physical treatment of spasms that accompany central nervous system lesions.

  9. Why bigger may in fact be better... in the context of table tennis

    Science.gov (United States)

    Truscott, Tadd; Pan, Zhao; Belden, Jesse

    2014-11-01

    We submit that table tennis is too fast. Because of the high ball velocities relative to the small table size, players are required to act extremely quickly, often exceeding the limits of human reaction time. Additionally, the Magnus effect resulting from large rotation rates introduces dramatically curved paths and causes rapid direction changes after striking the table or paddle, which effectively reduces reaction time further. Moreover, watching a professional game is often uninteresting and even tiring because the ball is moving too quickly to follow with the naked eye and the action of the players is too subtle to resolve from a distance. These facts isolate table tennis from our quantitatively defined ``fun game club,'' and make it less widely appealing than sports like baseball and soccer. Over the past 100 years, the rules of table tennis have changed several times in an effort to make the game more attractive to players and spectators alike, but the game continues to lose popularity. Here, we experimentally quantify the historic landmark equipment changes of table tennis from a fluid dynamics perspective. Based on theory and observation, we suggest a larger diameter ball for table tennis to make the game more appealing to both spectators and amateur players.

  10. On effects of topography in rotating flows

    Science.gov (United States)

    Burmann, Fabian; Noir, Jerome; Jackson, Andrew

    2017-11-01

    Both, seismological studies and geodynamic arguments suggest that there is significant topography at the core mantle boundary (CMB). This leads to the question whether the topography of the CMB could influence the flow in the Earth's outer core. As a preliminary experiment, we investigate the effects of bottom topography in the so-called Spin-Up, where motion of a contained fluid is created by a sudden increase of rotation rate. Experiments are performed in a cylindrical container mounted on a rotating table and quantitative results are obtained with particle image velocimetry. Several horizontal length scales of topography (λ) are investigated, ranging from cases where λ is much smaller then the lateral extend of the experiment (R) to cases where λ is a fraction of R. We find that there is an optimal λ that creates maximum dissipation of kinetic energy. Depending on the length scale of the topography, kinetic energy is either dissipated in the boundary layer or in the bulk of the fluid. Two different phases of fluid motion are present: a starting flow in the from of solid rotation (phase I), which is later replaced by meso scale vortices on the length scale of bottom topography (phase II).

  11. Response of anaerobic carbon cycling to water table manipulation in an Alaskan rich fen

    Science.gov (United States)

    E.S. Kane; M.R. Chivers; M.S. Turetsky; C.C. Treat; D.G. Petersen; M. Waldrop; J.W. Harden; A.D. McGuire

    2013-01-01

    To test the effects of altered hydrology on organic soil decomposition, we investigated CO2 and CH4 production potential of rich-fen peat (mean surface pH = 6.3) collected from a field water table manipulation experiment including control, raised and lowered water table treatments. Mean anaerobic CO2...

  12. Rotating positron tomographs revisited

    International Nuclear Information System (INIS)

    Townsend, D.; Defrise, M.; Geissbuhler, A.

    1994-01-01

    We have compared the performance of a PET scanner comprising two rotating arrays of detectors with that of the more conventional stationary-ring design. The same total number of detectors was used in each, and neither scanner had septa. For brain imaging, we find that the noise-equivalent count rate is greater for the rotating arrays by a factor of two. Rotating arrays have a sensitivity profile that peaks in the centre of the field of view, both axially and transaxially. In the transaxial plane, this effect offsets to a certain extent the decrease in the number of photons detected towards the centre of the brain due to self-absorption. We have also compared the performance of a rotating scanner to that of a full-ring scanner with the same number of rings. We find that a full-ring scanner with an axial extent of 16.2 cm (24 rings) is a factor of 3.5 more sensitive than a rotating scanner with 40% of the detectors and the same axial extent. (Author)

  13. Guide to mathematical tables supplement no 1

    CERN Document Server

    Burunova, N M; Fedorova, R M

    1960-01-01

    A Guide to Mathematical Tables is a supplement to the Guide to Mathematical Tables published by the U.S.S.R. Academy of Sciences in 1956. The tables contain information on subjects such as powers, rational and algebraic functions, and trigonometric functions, as well as logarithms and polynomials and Legendre functions. An index listing all functions included in both the Guide and the Supplement is included.Comprised of 15 chapters, this supplement first describes mathematical tables in the following order: the accuracy of the table (that is, the number of decimal places or significant

  14. The optical rotator

    DEFF Research Database (Denmark)

    Tandrup, T; Gundersen, Hans Jørgen Gottlieb; Jensen, Eva B. Vedel

    1997-01-01

    further discuss the methods derived from this principle and present two new local volume estimators. The optical rotator benefits from information obtained in all three dimensions in thick sections but avoids over-/ underprojection problems at the extremes of the cell. Using computer-assisted microscopes......The optical rotator is an unbiased, local stereological principle for estimation of cell volume and cell surface area in thick, transparent slabs, The underlying principle was first described in 1993 by Kieu Jensen (T. Microsc. 170, 45-51) who also derived an estimator of length, In this study we...... the extra measurements demand minimal extra effort and make this estimator even more efficient when it comes to estimation of individual cell size than many of the previous local estimators, We demonstrate the principle of the optical rotator in an example (the cells in the dorsal root ganglion of the rat...

  15. Vibrations of rotating machinery

    CERN Document Server

    Matsushita, Osami; Kanki, Hiroshi; Kobayashi, Masao; Keogh, Patrick

    2017-01-01

    This book opens with an explanation of the vibrations of a single degree-of-freedom (dof) system for all beginners. Subsequently, vibration analysis of multi-dof systems is explained by modal analysis. Mode synthesis modeling is then introduced for system reduction, which aids understanding in a simplified manner of how complicated rotors behave. Rotor balancing techniques are offered for rigid and flexible rotors through several examples. Consideration of gyroscopic influences on the rotordynamics is then provided and vibration evaluation of a rotor-bearing system is emphasized in terms of forward and backward whirl rotor motions through eigenvalue (natural frequency and damping ratio) analysis. In addition to these rotordynamics concerning rotating shaft vibration measured in a stationary reference frame, blade vibrations are analyzed with Coriolis forces expressed in a rotating reference frame. Other phenomena that may be assessed in stationary and rotating reference frames include stability characteristic...

  16. Arthroscopic rotator cuff repair in elite rugby players

    OpenAIRE

    Tambe, Amol; Badge, Ravi; Funk, Lennard

    2009-01-01

    Background: Rugby is an increasingly popular collision sport. A wide spectrum of injuries can be sustained during training and match play. Rotator cuff injury is uncommon in contact sports and there is little published literature on the treatment of rotator cuff tears in rugby players. Aims: We therefore reviewed the results and functional outcomes of arthroscopic rotator cuff repair in elite rugby players. Materials and Methods: Eleven professional rugby players underwent arthroscopic ...

  17. Design and implementation of a rotational radiotherapy technique for breast cancer treatment and their comparison with 3-D-Crt irradiation technique

    International Nuclear Information System (INIS)

    Gutierrez M, J. G.; Lopez V, A.; Rivera M, T.; Velazquez T, J. J.; Adame G, C. S.; Rubio N, O.; Chagoya G, A.; Hernandez G, J. C.

    2015-10-01

    Breast cancer is one of oncological diseases worldwide, as well in Mexico, which causes even more deaths than cervical cancer; this condition is the second death cause in women aged 30-54 years and threatens all socio-economic groups. The treatment is highly dependent on the stage which is detected and based on protocols that include a combination of surgery, chemotherapy and radiotherapy. This paper studies the main irradiation technique for patients with mastectomy, breast full cycle (irradiation of the chest well and supraclavicular nodes) in their mode Three Dimensional - Conformal Radiation Therapy (3-D-Crt), and compared with the Volumetric Modulated Arc Therapy (VMAT) technique proposed in this paper. In both techniques the prescription was 50 Gy divided into 25 fractions. The techniques were applied in three female patients (being an initial study) with disease of the left side, the target volume and organs at risk were delineated by the medical treating radiation oncologist, the planning system used was Eclipse version 10; for quantitative comparison of both plans indexes of homogeneity were used, con formality, the target volume coverage and normal tissue, sub factors and overdosing, the conformation number and coverage quality. They were evaluated and compared the media, maximum and minimum dose of the organs at risk, based on the fact that the coverage of the target volume, dose gradient and dose at risk organs are acceptable (prescription dose greater that 90% coverage, gradient less that 20% and organs at risk in accordance with the Quantec limitations for both versions). (Author)

  18. Rotating quantum states

    International Nuclear Information System (INIS)

    Ambruş, Victor E.; Winstanley, Elizabeth

    2014-01-01

    We revisit the definition of rotating thermal states for scalar and fermion fields in unbounded Minkowski space–time. For scalar fields such states are ill-defined everywhere, but for fermion fields an appropriate definition of the vacuum gives thermal states regular inside the speed-of-light surface. For a massless fermion field, we derive analytic expressions for the thermal expectation values of the fermion current and stress–energy tensor. These expressions may provide qualitative insights into the behaviour of thermal rotating states on more complex space–time geometries

  19. Rotating bubble membrane radiator

    Science.gov (United States)

    Webb, Brent J.; Coomes, Edmund P.

    1988-12-06

    A heat radiator useful for expelling waste heat from a power generating system aboard a space vehicle is disclosed. Liquid to be cooled is passed to the interior of a rotating bubble membrane radiator, where it is sprayed into the interior of the bubble. Liquid impacting upon the interior surface of the bubble is cooled and the heat radiated from the outer surface of the membrane. Cooled liquid is collected by the action of centrifical force about the equator of the rotating membrane and returned to the power system. Details regarding a complete space power system employing the radiator are given.

  20. Resultados do tratamento cirúrgico da artropatia degenerativa do manguito rotador utilizando hemiartroplastia-CTA® Results of surgical treatment of denerative arthropathy of the rotator cuff using hemiarthroplasty-CTA®

    Directory of Open Access Journals (Sweden)

    Rômulo Brasil Filho

    2012-02-01

    Full Text Available OBJETIVO: Avaliar os resultados da artroplastia parcial de ombro tipo CTA® para o tratamento da artropatia degenerativa do manguito. MÉTODOS: De dezembro de 2006 a junho de 2009, 23 ombros de 23 pacientes foram submetidos à artroplastia parcial tipo CTA® para o tratamento de artropatia por lesão do manguito rotador. O tempo de seguimento pós-operatório variou de seis a 35 meses. A idade média foi de 74,1 anos. Houve predomínio do sexo feminino em 78,3% dos casos. O membro direito foi acometido em 18 pacientes. Todos os pacientes foram submetidos, sem melhora dos sintomas, ao tratamento fisioterápico prévio por pelo menos seis meses e foram submetidos à cirurgia pela mesma equipe cirúrgica. Nenhum dos pacientes havia realizado cirurgia prévia no ombro afetado. A avaliação dos pacientes no seguimento pós-operatório seguiu os critérios do escore da UCLA. RESULTADOS: Verificou-se melhora da dor em todos pacientes após a artroplastia. Pelo escore da UCLA, a média de pontos em relação à dor foi de 9,22 (variando de 10 a oito. Quanto à função, a média foi de seis (10 a dois. Encontramos nesses pacientes média de 2,39 na flexão frontal ativa (quatro a zero. Na força de flexão frontal a média foi de 4,09 com máxima de cinco e mínima de três. A média de pontos do escore da UCLA foi de 26,52. Noventa e cinco porcento dos pacientes ficaram satisfeitos com a cirurgia. CONCLUSÃO: A artroplastia parcial de ombro tipo CTA® tem resultados satisfatórios no tratamento da artropatia degenerativa do manguito rotador e apresenta baixa taxa de complicação.OBJECTIVE: To assess results of CTA® partial shoulder arthroplasty for treatment of degenerative arthropathy of the rotator cuff. METHODS: Between December 2006 and June 2009, 23 shoulders of 23 patients were submitted to CTA® type partial shoulder arthroplasty for treatment of arthropathy secondary to rotator cuff injury. Post-operative follow up time ranged from 6 to 35

  1. Table-top job analysis

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    The purpose of this Handbook is to establish general training program guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at Department of Energy (DOE) nuclear facilities. TTJA is not the only method of job analysis; however, when conducted properly TTJA can be cost effective, efficient, and self-validating, and represents an effective method of defining job requirements. The table-top job analysis is suggested in the DOE Training Accreditation Program manuals as an acceptable alternative to traditional methods of analyzing job requirements. DOE 5480-20A strongly endorses and recommends it as the preferred method for analyzing jobs for positions addressed by the Order.

  2. Radiologic Findings of Reversed Intestinal Rotation in Adults: 3 Cases Report

    International Nuclear Information System (INIS)

    Baek, Hyeon Seok; Cho, Jae Ho; Chang, Jay Chun; Kim, Jae Woon; Kim, Kum Rae; Park, Won Kyu; Kim, Jong Yeol

    2009-01-01

    Most anomalies of intestinal rotation are detected during the postneonatal period. In adults, the diagnosis and treatment of patients with a congenital anomaly of the midgut can be difficult because of their extremely rarity. Based on embryology, anomalies of intestinal rotation can be divided into non-rotation, reversed rotation and malrotation. Reversed rotation of the midgut is the rarest of all anomalies of intestinal rotation. Although this anomaly is rare, it can be diagnosed by a detailed knowledge of embryology and anatomy. We report three adult patients with reversed intestinal rotation and review the embryology, clinical presentation and radiographic findings of this disorder

  3. Rotator manşetin kalsifiye tendinitinin artroskopik tedavisi

    OpenAIRE

    Ozkoc, Gurkan; Akpinar, Sercan; Hersekli, Murat; Ozalay, Metin; Tandogan, Reha

    2004-01-01

    Objectives: We evaluated the effectiveness of arthroscopic treatment in patients with rotator cuff calcifying tendinitis unresponsive to conservative treatment.Methods: Arthroscopic treatment was performed in 10 patients (6 females, 4 males; mean age 46 years; range 34 to 53 years) in whom pain and functional disability persisted for more than a year despite conservative therapy for rotator cuff calcifying tendinitis. Arthroscopic bursectomy was also carried out. One patient underwent repair ...

  4. Kinematic variables of table vault on artistic gymnastics

    Directory of Open Access Journals (Sweden)

    Sarah Maria Boldrini FERNANDES

    2016-03-01

    Full Text Available Abstract The table vault is an event of male and female Artistics Gymnastics. Although it can be performed in a variety of rotations and body positions in different phases, it can be separated in three groups: handspring, Yurchenko and Tsukahara. It is believed that kinematic variables of vault may vary according to group of vault or gymnast body position, but few studies compares the real differences among the three groups of vaults, comparing and describing the variables in different phases. Vault kinematic variables could be diversifying according to the approach or position of the vaulting, but little has been studied about the biomechanical differences, comparing and describing behaviours at different stages. The aim of this study was to organize critical, objective and to systematize the most relevant kinematic variables to performance on vaulting. A Meta analysis over the basis Pubmed, Sport Discus and Web of Science were performed about this issue. From the selected references, we described and analyzed the kinematics of the table vault. Vault can be characterized in seven phases of analysis. Most of the studies are descriptive, and some do not descript all phases. Differences among vault variables according to group vaults, technical level and gender were analysed only in recent studies. There still gaps of knowledge about kinematic variables of table vault, in order to provide comprehensive information about all possibilities of vaults in this gymnastic event. It is concluded that kinematic variables of table vault depends upon vault group and may be considered to the improvement of technical performance. More researches are needed to approach the coaching interface with biomechanics applicable knowledge.

  5. A table-top LHC

    CERN Multimedia

    Barbara Warmbein

    2011-01-01

    Many years ago, when ATLAS was no more than a huge empty underground cavern and Russian artillery shell casings were being melted down to become part of the CMS calorimetry system, science photographer Peter Ginter started documenting the LHC’s progress. He was there when special convoys of equipment crossed the Jura at night, when cranes were lowering down detector slices and magnet coils were being wound in workshops. Some 18 years of LHC history have been documented by Ginter, and the result has just come out as a massive coffee table book full of double-page spreads of Ginter’s impressive images.   The new coffee table book, LHC: the Large Hadron Collider. Published by the Austrian publisher Edition Lammerhuber in cooperation with CERN and UNESCO Publishing, LHC: the Large Hadron Collider is an unusual piece in the company’s portfolio. As the publisher’s first science book, LHC: the Large Hadron Collider weighs close to five kilos and comes in a s...

  6. Open table-top device positioning technique to reduce small bowel obstruction. Positioning accuracy and impact on conformal radiation therapy techniques

    International Nuclear Information System (INIS)

    Rudat, V.; Flentje, M.; Engenhart, R.; Metzger, M.; Wannenmacher, M.

    1995-01-01

    The immobilization error of patients positioned on the opern table-top device in prone prosition as well as the movement of the small bowel out of the pelvis by this positioning technique was determined. The positioning error is of special importance for the 3-dimensional treatment planning for conformal radiotherapy. The positioning error was determined by superposing 106 portal films with the corresponding simultor films from 21 patients with carcinoma of the rectum who received 3D-planned conformal radiotherapy (o-field technique with irregular blocks). The movement of the small bowel out of the pelvis was studied by comparing simulator films after barium swallow in supine and open table-top position as well with 3D-treatment plans of the same patient in both positions in 3 cases. The positioning error along the medio-lateral, dorso-ventral und cranio-caudal axis was 1.4/-0.6/1.8 mm and the standard deviation 4.4/6.8/6.3 mm, respectively. In comparison to the supine position more rotation errors in the sagittal view were observed (37% and 9% respectively) with a media of 5.1 . Six out of 22 patients showed no adhesions of the small bowel and a complete movement out of the tratment field was achieved. 14 out of 16 Patients with adhesions revealed a partial movement of the small bowel out of the treatment field. Comparing 3D-treatment plans in both positions again demonstrated a marked reduction of the irradiated small bowel volume with the use of the open table-top decive. (orig.) [de

  7. Negative Rotation Cinch Strap.

    Science.gov (United States)

    This project discloses an improved unitary parachute torso harness, having a single fastening means, wherein an auxillary tightening strap is...attached to the groin straps of said harness. Said auxillary straps are used to prevent torso rotation or harness slippage and to prevent harness elongation

  8. A rotating string

    International Nuclear Information System (INIS)

    Jensen, B.

    1993-06-01

    The author presents a global solution of Einstein's equations which represents a rotating cosmic string with a finite coreradius. The importance of pressure for the generation of closed timelike curves outside the coreregion of such strings is clearly displayed in this model due to the simplicity of the source. 10 refs

  9. Rotational dynamics with Tracker

    International Nuclear Information System (INIS)

    Eadkhong, T; Danworaphong, S; Rajsadorn, R; Jannual, P

    2012-01-01

    We propose the use of Tracker, freeware for video analysis, to analyse the moment of inertia (I) of a cylindrical plate. Three experiments are performed to validate the proposed method. The first experiment is dedicated to find the linear coefficient of rotational friction (b) for our system. By omitting the effect of such friction, we derive I for a cylindrical plate rotated around its central axis from the other two experiments based on the relation between torque and angular acceleration of rotational motion and conservation of energy. Movies of the rotating plate and hung masses are recorded. As a result, we have the deviation of I from its theoretical value of 0.4% and 3.3%, respectively. Our setup is completely constructed from locally available inexpensive materials and the experimental results indicate that the system is highly reliable. This work should pave the way for those who prefer to build a similar setup from scratch at relatively low cost compared to commercial units. (paper)

  10. The Axial Curve Rotator.

    Science.gov (United States)

    Hunter, Walter M.

    This document contains detailed directions for constructing a device that mechanically produces the three-dimensional shape resulting from the rotation of any algebraic line or curve around either axis on the coordinate plant. The device was developed in response to student difficulty in visualizing, and thus grasping the mathematical principles…

  11. Can planetary nebulae rotate

    International Nuclear Information System (INIS)

    Grinin, V.P.

    1982-01-01

    It is shown that the inclination of spectral lines observed in a number of planetary nebulae when the spectrograph slit is placed along the major axis, which is presently ascribed to nonuniform expansion of the shells, actually may be due to rotation of the nebulae about their minor axes, as Campbell and Moore have suggested in their reports. It is assumed that the rotation of the central star (or, if the core is a binary system, circular motions of gas along quasi-Keplerian orbits) serves as the source of the original rotation of a protoplanetary nebula. The mechanism providing for strengthening of the original rotation in the process of expansion of the shell is the tangential pressure of L/sub α/ radiation due to the anisotropic properties of the medium and radiation field. The dynamic effect produced by them is evidently greatest in the epoch when the optical depth of the nebula in the L/sub c/ continuum becomes on the order of unity in the course of its expansion

  12. SU-G-TeP2-04: Comprehensive Machine Isocenter Evaluation with Separation of Gantry, Collimator, and Table Variables

    Energy Technology Data Exchange (ETDEWEB)

    Hancock, S [Southeast Missouri Hospital, Cape Girardeau, MO (United States); Clements, C [Radiological Imaging Technology, Colorado Springs, CO (United States); Hyer, D; Nixon, E [University Of Iowa, Iowa City, IA (United States); Martin, E; Wang, B [University of Louisville, Louisville, KY (United States); Jani, S [Sharp Memorial Hospital, San Diego, CA (United States); Gossman, M [Tri-State Regional Cancer Center, Ashland, KY (United States)

    2016-06-15

    Purpose: To develop and demonstrate application of a method that characterizes deviation of linac x-ray beams from the centroid of the volumetric radiation isocenter as a function of gantry, collimator, and table variables. Methods: A set of Winston-Lutz ball-bearing images was used to determine the gantry radiation isocenter as the midrange of deviation values resulting from gantry and collimator rotation. Also determined were displacement of table axis from gantry isocenter and recommended table axis adjustment. The method, previously reported, has been extended to include the effect of collimator walkout by obtaining measurements with 0 and 180 degree collimator rotation for each gantry angle. Twelve images were used to characterize the volumetric isocenter for the full range of available gantry, collimator, and table rotations. Results: Three Varian True Beam, two Elekta Infinity and four Versa HD linacs at five institutions were tested using identical methodology. Varian linacs exhibited substantially less deviation due to head sag than Elekta linacs (0.4 mm vs. 1.2 mm on average). One linac from each manufacturer had additional isocenter deviation of 0.3 to 0.4 mm due to jaw instability with gantry and collimator rotation. For all linacs, the achievable isocenter tolerance was dependent on adjustment of collimator position offset, transverse position steering, and alignment of the table axis with gantry isocenter, facilitated by these test results. The pattern and magnitude of table axis wobble vs. table angle was reproducible and unique to each machine. Conclusion: This new method provides a comprehensive set of isocenter deviation values including all variables. It effectively facilitates minimization of deviation between beam center and target (ball-bearing) position. This method was used to quantify the effect of jaw instability on isocenter deviation and to identify the offending jaw. The test is suitable for incorporation into a routine machine QA

  13. Rotator Cuff Disease and Injury--Evaluation and Management.

    Science.gov (United States)

    Williams, Randy

    This presentation considers the incidence, evaluation, and management of rotator cuff disease and injury. Pathogenesis, symptoms, physical findings, treatment (therapeutic and surgical), and prevention are discussed. It is noted that rotator cuff problems, common in athletes, are usually related to an error in training or lack of training. They…

  14. Rotating biological contactors: the Canadian experience

    Energy Technology Data Exchange (ETDEWEB)

    Cuenca, Manuel A. [Ryerson Polytechnical Univ., Toronto, ON (Canada). Chemical Engineering Dept.; Smith, Tom [CMS Rotordisk Inc., Concord, ON (Canada); Vianna, Arlinda C. [Servico Nacional de Aprendizagem Industrial (SENAI), Salvador, BA (Brazil)

    1993-12-31

    In fifteen years, Rotating Biological Contactors (RBC) have become one of the most attractive technologies for secondary wastewater treatment. The present work is a review of the evolution of RBC technology in the last twenty years. In addition, the status of the technology in Canada is described, emphasizing industrial facilities and landfill leachate treatment. An enumeration of the most relevant development areas is included. (author). 34 refs., 3 figs., 7 tabs.

  15. Rotating biological contactors: the Canadian experience

    Energy Technology Data Exchange (ETDEWEB)

    Cuenca, Manuel A [Ryerson Polytechnical Univ., Toronto, ON (Canada). Chemical Engineering Dept.; Smith, Tom [CMS Rotordisk Inc., Concord, ON (Canada); Vianna, Arlinda C [Servico Nacional de Aprendizagem Industrial (SENAI), Salvador, BA (Brazil)

    1994-12-31

    In fifteen years, Rotating Biological Contactors (RBC) have become one of the most attractive technologies for secondary wastewater treatment. The present work is a review of the evolution of RBC technology in the last twenty years. In addition, the status of the technology in Canada is described, emphasizing industrial facilities and landfill leachate treatment. An enumeration of the most relevant development areas is included. (author). 34 refs., 3 figs., 7 tabs.

  16. Anatomy of a Cancer Treatment Scam

    Medline Plus

    Full Text Available ... Table of Contents Exemptions Careers at the FTC Work at the FTC Life at the FTC Benefits ... Report Magnuson-Moss Warranty Public Audit Filings Rotational Health Warnings Webb-Pomerene Act Filings Studies Remedy Study ...

  17. Inferring probabilistic stellar rotation periods using Gaussian processes

    Science.gov (United States)

    Angus, Ruth; Morton, Timothy; Aigrain, Suzanne; Foreman-Mackey, Daniel; Rajpaul, Vinesh

    2018-02-01

    Variability in the light curves of spotted, rotating stars is often non-sinusoidal and quasi-periodic - spots move on the stellar surface and have finite lifetimes, causing stellar flux variations to slowly shift in phase. A strictly periodic sinusoid therefore cannot accurately model a rotationally modulated stellar light curve. Physical models of stellar surfaces have many drawbacks preventing effective inference, such as highly degenerate or high-dimensional parameter spaces. In this work, we test an appropriate effective model: a Gaussian Process with a quasi-periodic covariance kernel function. This highly flexible model allows sampling of the posterior probability density function of the periodic parameter, marginalizing over the other kernel hyperparameters using a Markov Chain Monte Carlo approach. To test the effectiveness of this method, we infer rotation periods from 333 simulated stellar light curves, demonstrating that the Gaussian process method produces periods that are more accurate than both a sine-fitting periodogram and an autocorrelation function method. We also demonstrate that it works well on real data, by inferring rotation periods for 275 Kepler stars with previously measured periods. We provide a table of rotation periods for these and many more, altogether 1102 Kepler objects of interest, and their posterior probability density function samples. Because this method delivers posterior probability density functions, it will enable hierarchical studies involving stellar rotation, particularly those involving population modelling, such as inferring stellar ages, obliquities in exoplanet systems, or characterizing star-planet interactions. The code used to implement this method is available online.

  18. Tilting mode in rigidly rotating field-reversed configurations

    International Nuclear Information System (INIS)

    Clemente, R.A.; Milovich, J.L.

    1983-01-01

    The tilting-mode stability of field-reversed configurations is analyzed taking into account plasma rotational effects that had not been included in previous theoretical treatments. It is shown that for a rigidly rotating plasma in stationary equilibrium, stability can be attained if the plasma rotational energy is of the same order as the thermal energy. Since presently available values of the rotational velocities are quite lower than required by the stabilization mechanism considered here, the contribution of this effect to the overall stability of the mode does not appear to be significant

  19. Wave-driven Rotation in Supersonically Rotating Mirrors

    Energy Technology Data Exchange (ETDEWEB)

    A. Fetterman and N.J. Fisch

    2010-02-15

    Supersonic rotation in mirrors may be produced by radio frequency waves. The waves produce coupled diffusion in ion kinetic and potential energy. A population inversion along the diffusion path then produces rotation. Waves may be designed to exploit a natural kinetic energy source or may provide the rotation energy on their own. Centrifugal traps for fusion and isotope separation may benefit from this wave-driven rotation.

  20. Wave-driven Rotation in Supersonically Rotating Mirrors

    International Nuclear Information System (INIS)

    Fetterman, A.; Fisch, N.J.

    2010-01-01

    Supersonic rotation in mirrors may be produced by radio frequency waves. The waves produce coupled diffusion in ion kinetic and potential energy. A population inversion along the diffusion path then produces rotation. Waves may be designed to exploit a natural kinetic energy source or may provide the rotation energy on their own. Centrifugal traps for fusion and isotope separation may benefit from this wave-driven rotation.

  1. Glenohumeral interposition of rotator cuff stumps: a rare complication of traumatic rotator cuff tear

    Directory of Open Access Journals (Sweden)

    Paulo Moraes Agnollitto

    2016-02-01

    Full Text Available Abstract The present report describes a case where typical findings of traumatic glenohumeral interposition of rotator cuff stumps were surgically confirmed. This condition is a rare complication of shoulder trauma. Generally, it occurs in high-energy trauma, frequently in association with glenohumeral joint dislocation. Radiography demonstrated increased joint space, internal rotation of the humerus and coracoid process fracture. In addition to the mentioned findings, magnetic resonance imaging showed massive rotator cuff tear with interposition of the supraspinatus, infraspinatus and subscapularis stumps within the glenohumeral joint. Surgical treatment was performed confirming the injury and the rotator cuff stumps interposition. It is important that radiologists and orthopedic surgeons become familiar with this entity which, because of its rarity, might be neglected in cases of shoulder trauma.

  2. Health effects assessment summary tables

    International Nuclear Information System (INIS)

    1999-01-01

    The document is an excellent pointer system to identify current literature or changes in assessment criteria for many chemicals of interest to Superfund. It was prepared for Superfund use by the Environmental Criteria and Assessment Office (ECAO-Cin) in EPA's Office of Health and Environmental Assessment. Chemicals considered are those for which Health Effects Assessment Documents, Health and Environmental Effects Profiles, Health Assessment Documents or Air Quality Criteria Documents have been prepared by ECAO. Radionuclides considered are those believed to be most common at Superfund sites. Tables summarize reference doses (RfDs) for toxicity from subchronic and chronic inhalation, oral exposure, slope factors and unit risk values for carcinogenicity based on lifetime inhalation and oral exposure, and radionuclide carcinogenicity

  3. The periodic table in Flatland

    International Nuclear Information System (INIS)

    Kibler, M.

    1995-01-01

    The D-dimensional Coulomb system serves as a starting point for generating generalized atomic shells. These shells are ordered according to a generalized Madelung rule in D dimensions. This rule together with an Aufbau Prinzip is applied to produce a D-dimensional periodic table. A model is developed to rationalize the ordering of the shells predicted by the generalized Madelung rule. This model is based on the introduction of an Hamiltonian, invariant under the q-deformed algebra U q (so(D)), that breaks down the SO (D + 1) dynamical symmetry of the hydrogen atom in D dimensions. The D = 2 case (Flatland) is investigated with some details. It is shown that the neutral atoms and the (moderately) positive ions correspond to the values q = 0.8 and q = 1, respectively, of the deformation parameter q. (authors). 55 refs

  4. An ECR table plasma generator

    International Nuclear Information System (INIS)

    Racz, R.; Palinkas, J.; Bin, S.

    2012-01-01

    A compact ECR plasma device was built in our lab using the 'spare parts' of the ATOMKI ECR ion source. We call it 'ECR Table Plasma Generator'. It consists of a relatively big plasma chamber (ID=10 cm, L=40 cm) in a thin NdFeB hexapole magnet with independent vacuum and gas dosing systems. For microwave coupling two low power TWTAs (Travelling Wave tube amplifier) can be applied individually or simultaneously, operating in the 6-18 GHz range. There is no axial magnetic trap and there is no extraction. The technical details of the plasma generator and preliminary plasma photo study results are shown. This paper is followed by the associated poster. (authors)

  5. ARTHROSCOPIC CORRECTION OF THE INJURIES OF THE COMPLEX «TENDON OF THE BICEPS LONG HEAD - THE ARTICULAR LIP» IN TREATMENT OF PATIENTS WITH FULL-LAYER RUPTURES OF THE ROTATOR CUFF

    Directory of Open Access Journals (Sweden)

    S. Y. Dokolin

    2013-01-01

    Full Text Available Damage of the long head of the biceps at the place of attachment to the articular tubercle supraglenoidal lip of shoulder, to the entrance and throughout intertubercle furrows are common causes of pain and dysfunction of the shoulder joint. At the same clinical manifestations of the morphology of such lesions may be different. The current literature discusses various options of surgical correction of the biceps injury. Variety of methods of surgical treatment and the lack of consensus in support of their application in different patients in different types of injuries were the basis for the present study. A prospective analysis of the functional results of surgical treatment of the 34 - year’s patients with associated rotator cuff (SSP+ISP+SSC+ and the tendon of the biceps muscle in age from 34 to 75 years. Options for surgical correction of the damaged part of the biceps were: biceps tenotomy, biceps tenotomy with intraarticular tenodez of the shoulder to the head before entering intertubercle furrow, biceps tenotomy and extraarticular subpectorialtenodez to the proximal humerus is intertubercle interferrent screw groove, as well as its attachment to the tendon suture large pectoral muscle. Choice of surgical approach depended on the patient's age, level of daily physical activity, morphology and localization of lesions. The best results were obtained when the extra-articular subpectorialtenodez of long head of the biceps to the proximal humerus interferrent screw and suture fixation to the pectoralis major muscle, the average follow-up was 16,6 ± 4,7 months.

  6. Rotationally Stable Screw-Anchor With Locked Trochanteric Stabilizing Plate Versus Proximal Femoral Nail Antirotation in the Treatment of AO/OTA 31A2.2 Fracture: A Biomechanical Evaluation.

    Science.gov (United States)

    Knobe, Matthias; Nagel, Philipp; Maier, Klaus-Jürgen; Gradl, Gertraud; Buecking, Benjamin; Sönmez, Tolga T; Modabber, Ali; Prescher, Andreas; Pape, Hans-Christoph

    2016-01-01

    Third-generation cephalomedullary nails currently represent the gold standard in the treatment of unstable trochanteric femur fractures. Recently, an extramedullary rotationally stable screw-anchor system (RoSA) has been developed. It was designed to combine the benefits of screw and blade and to improve stability using a locked trochanteric stabilizing plate (TSP). The purpose of this study was to compare the biomechanical behavior of RoSA/TSP and the proximal femoral nail antirotation (PFNA). Standardized AO/OTA 31A2.2 fractures were induced by an oscillating saw in 10 paired human specimens (n = 20; mean age = 85 years; range: 71-96 years). The fractures were stabilized by either the RoSA/TSP (Koenigsee Implants, Allendorf, Germany) or the PFNA (DePuy Synthes, Zuchwil, Switzerland). Femurs were positioned in 25 degrees of adduction and 10 degrees of posterior flexion and were cyclically loaded with axial sinusoidal pattern at 0.5 Hz, starting at 300 N, with stepwise increase by 300 N every 500 cycles until bone-implant failure occurred. After every load step, the samples were measured visually and radiographically. Femoral head migration was assessed. The stiffness at the load up to the clinically relevant load step of 1800 N (639 ± 378 N/mm (RoSA/TSP) vs. 673 ± 227 N/mm (PFNA); P = 0.542) was comparable, as was the failure load (3000 ± 787 N vs. 3780 ± 874 N; P = 0.059). Up to 1800 N, no femoral head rotation, head migration, or femoral neck shortening were observed either for RoSA/TSP or PFNA. Whereas failure of the PFNA subsumed fractures of the greater trochanter and the lateral wall, a posterior femoral neck fracture with a significantly increased femoral neck shortening (1.7 mm vs. 0 mm; P = 0.012) was the cause of failure with RoSA/TSP. This specific kind of failure was induced by a femoral neck weakening caused by the posterior TSP stabilizing screw. There was no significant difference in biomechanical properties between the RoSA/TSP and the PFNA for

  7. Environmental regulatory update table, March 1989

    International Nuclear Information System (INIS)

    Houlberg, L.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

    1989-04-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action

  8. Environmental Regulatory Update Table, April 1989

    International Nuclear Information System (INIS)

    Houlberg, L.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

    1989-05-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action

  9. Environmental Regulatory Update Table, August 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M., Hawkins, G.T.; Salk, M.S.

    1991-09-01

    This Environmental Regulatory Update Table (August 1991) provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  10. Environmental Regulatory Update Table, December 1989

    International Nuclear Information System (INIS)

    Houlbert, L.M.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

    1990-01-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action

  11. Thermodynamic tables to accompany Modern engineering thermodynamics

    CERN Document Server

    Balmer, Robert T

    2011-01-01

    This booklet is provided at no extra charge with new copies of Balmer's Modern Engineering Thermodynamics. It contains two appendices. Appendix C contains 40 thermodynamic tables, and Appendix D consists of 6 thermodynamic charts. These charts and tables are provided in a separate booklet to give instructors the flexibility of allowing students to bring the tables into exams. The booklet may be purchased separately if needed.

  12. Environmental Regulatory Update Table, December 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1992-01-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  13. A table top exercise and workshop

    International Nuclear Information System (INIS)

    Lakey, J.R.A.

    1992-01-01

    Table top exercises are widely applied in training for emergency preparedness and have long been a feature of Courses on Planning for Nuclear Emergencies. Experience of a large number of table top exercises is used to provide a classification of the types of exercise indicating the application and the disadvantages. The use of workshops is considered to be complementary rather than an alternative to teaching methods available from table top exercises. (author)

  14. Environmental Regulatory Update Table, August 1990

    International Nuclear Information System (INIS)

    Houlberg, L.M.; Nikbakht, A.; Salk, M.S.

    1990-09-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action

  15. Environmental Regulatory Update Table, October 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1991-11-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  16. Environmental Regulatory Update Table, November 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1991-12-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  17. Environmental Regulatory Update Table, September 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1991-10-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  18. Environmental regulatory update table, July 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1991-08-01

    This Environmental Regulatory Update Table (July 1991) provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  19. Rotational partition functions for linear molecules

    International Nuclear Information System (INIS)

    McDowell, R.S.

    1988-01-01

    An accurate closed-form expression for the rotational partition function of linear polyatomic molecules in 1 summation electronic states is derived, including the effect of nuclear spin (significant at very low temperatures) and of quartic and sextic centrifugal distortion terms (significant at moderate and high temperatures). The proper first-order quantum correction to the classical rigid-rotator partition function is shown to yield Q/sub r/ ≅β -1 exp(β/3), where βequivalenthcB/kT and B is the rotational constant in cm -1 ; for β≥0.2 additional power-series terms in β are necessary. Comparison between the results of this treatment and exact summations are made for HCN and C 2 H 2 at temperatures from 2 to 5000 K, including separate evaluation of the contributions of nuclear spin and centrifugal distortion

  20. Rotator Cuff Injuries - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Rotator Cuff Injuries URL of this page: https://medlineplus.gov/ ... V W XYZ List of All Topics All Rotator Cuff Injuries - Multiple Languages To use the sharing features ...

  1. Rotatable seal assembly

    International Nuclear Information System (INIS)

    Garibaldi, J.L.; Logan, C.M.

    1982-01-01

    An assembly is provided for rotatably supporting a rotor on a stator so that vacuum chambers in the rotor and stator remain in communication while the chambers are sealed from ambient air, which enables the use of a ball bearing or the like to support most of the weight of the rotor. The apparatus includes a seal device mounted on the rotor to rotate therewith, but shiftable in position on the rotor while being sealed to the rotor as by an oring. The seal device has a flat face that is biased towards a flat face on the stator, and pressurized air is pumped between the faces to prevent contact between them while spacing them a small distance apart to avoid the inflow of large amounts of air between the faces and into the vacuum chambers

  2. Rotator cuff disease

    International Nuclear Information System (INIS)

    Ziatkin, M.B.; Iannotti, J.P.; Roberts, M.; Dalinka, M.K.; Esterhai, J.L.; Kressel, H.Y.; Lenkinski, R.E.

    1988-01-01

    A dual-surface-coil array in a Helmholtz configuration was used to evaluate th rotator cuff in ten normal volunteers and 44 patients. Studies were performed with a General Electric 1.5-T MR imager. Thirty-two patients underwent surgery, 25 of whom also underwent arthrography. In comparison with surgery, MR imaging was more sensitive than arthrography for rotator cuff tears (91% vs 71%). The specificity and accuracy of MR imaging were 88% and 91%. The accuracy increased with use of an MR grading system. MR findings correlated with surgical findings with regard to the size and site of tears. MR findings of cuff tears were studied with multivariate analysis. Correlation was also found between a clinical score, the MR grade, and the clinical outcome

  3. The Spatiale Rotator

    DEFF Research Database (Denmark)

    Rasmusson, Allan

    2009-01-01

    it is embedded and sectioned. This has the unfortunate side effect that all information about positioning within the object is lost for blocks and sections. For complex tissue, like the mammalian brain, this information is of utmost importance to ensure measurements are performed in the correct region......The inherent demand for unbiasedness for some stereological estimators imposes a demand of not only positional uniform randomness but also isotropic randomness, i.e. directional uniform randomness. In order to comply with isotropy, one must perform a random rotation of the object of interest before...... is obeyed by randomizing the orientation of the virtual probe itself within the thick section. Overall, the benefit is that positional information is kept for any block and section of the specimen. As the Spatial Rotator is a 3D probe, data must be gathered from sections thicker than 25 micro meters to form...

  4. Rotational spectrum of tryptophan

    Energy Technology Data Exchange (ETDEWEB)

    Sanz, M. Eugenia, E-mail: maria.sanz@kcl.ac.uk; Cabezas, Carlos, E-mail: ccabezas@qf.uva.es; Mata, Santiago, E-mail: santiago.mata@uva.es; Alonso, Josè L., E-mail: jlalonso@qf.uva.es [Grupo de Espectroscopia Molecular (GEM), Edificio Quifima, Laboratorios de Espectroscopia y Bioespectroscopia, Unidad Asociada CSIC, Parque Científico Uva, Universidad de Valladolid, 47011 Valladolid (Spain)

    2014-05-28

    The rotational spectrum of the natural amino acid tryptophan has been observed for the first time using a combination of laser ablation, molecular beams, and Fourier transform microwave spectroscopy. Independent analysis of the rotational spectra of individual conformers has conducted to a definitive identification of two different conformers of tryptophan, with one of the observed conformers never reported before. The analysis of the {sup 14}N nuclear quadrupole coupling constants is of particular significance since it allows discrimination between structures, thus providing structural information on the orientation of the amino group. Both observed conformers are stabilized by an O–H···N hydrogen bond in the side chain and a N–H···π interaction forming a chain that reinforce the strength of hydrogen bonds through cooperative effects.

  5. Table of specific activities of selected isotopes

    International Nuclear Information System (INIS)

    Shipley, G.

    The bulk of this publication consists of a table of the half-lives, decay modes, and specific activities of isotopes selected for their particular interest to the Environmental Health and Safety Department, LBL. The specific activities were calculated with a PDP 9/15 computer. Also included in the report is a table of stable isotopes, the Th and U decay chains, a chart of the nuclides for elements 101 through 106, the heavy element region of the periodic table, and a specific activity monograph. 5 figures, 2 tables

  6. Rotator cuff tendon connections with the rotator cable.

    Science.gov (United States)

    Rahu, Madis; Kolts, Ivo; Põldoja, Elle; Kask, Kristo

    2017-07-01

    The literature currently contains no descriptions of the rotator cuff tendons, which also describes in relation to the presence and characteristics of the rotator cable (anatomically known as the ligamentum semicirculare humeri). The aim of the current study was to elucidate the detailed anatomy of the rotator cuff tendons in association with the rotator cable. Anatomic dissection was performed on 21 fresh-frozen shoulder specimens with an average age of 68 years. The rotator cuff tendons were dissected from each other and from the glenohumeral joint capsule, and the superior glenohumeral, coracohumeral, coracoglenoidal and semicircular (rotator cable) ligaments were dissected. Dissection was performed layer by layer and from the bursal side to the joint. All ligaments and tendons were dissected in fine detail. The rotator cable was found in all specimens. It was tightly connected to the supraspinatus (SSP) tendon, which was partly covered by the infraspinatus (ISP) tendon. The posterior insertion area of the rotator cable was located in the region between the middle and inferior facets of the greater tubercle of the humerus insertion areas for the teres minor (TM), and ISP tendons were also present and fibres from the SSP extended through the rotator cable to those areas. The connection between the rotator cable and rotator cuff tendons is tight and confirms the suspension bridge theory for rotator cuff tears in most areas between the SSP tendons and rotator cable. In its posterior insertion area, the rotator cable is a connecting structure between the TM, ISP and SSP tendons. These findings might explain why some patients with relatively large rotator cuff tears can maintain seamless shoulder function.

  7. Broadband Rotational Spectroscopy

    Science.gov (United States)

    Pate, Brooks

    2014-06-01

    The past decade has seen several major technology advances in electronics operating at microwave frequencies making it possible to develop a new generation of spectrometers for molecular rotational spectroscopy. High-speed digital electronics, both arbitrary waveform generators and digitizers, continue on a Moore's Law-like development cycle that started around 1993 with device bandwidth doubling about every 36 months. These enabling technologies were the key to designing chirped-pulse Fourier transform microwave (CP-FTMW) spectrometers which offer significant sensitivity enhancements for broadband spectrum acquisition in molecular rotational spectroscopy. A special feature of the chirped-pulse spectrometer design is that it is easily implemented at low frequency (below 8 GHz) where Balle-Flygare type spectrometers with Fabry-Perot cavity designs become technologically challenging due to the mirror size requirements. The capabilities of CP-FTMW spectrometers for studies of molecular structure will be illustrated by the collaborative research effort we have been a part of to determine the structures of water clusters - a project which has identified clusters up to the pentadecamer. A second technology trend that impacts molecular rotational spectroscopy is the development of high power, solid state sources in the mm-wave/THz regions. Results from the field of mm-wave chirped-pulse Fourier transform spectroscopy will be described with an emphasis on new problems in chemical dynamics and analytical chemistry that these methods can tackle. The third (and potentially most important) technological trend is the reduction of microwave components to chip level using monolithic microwave integrated circuits (MMIC) - a technology driven by an enormous mass market in communications. Some recent advances in rotational spectrometer designs that incorporate low-cost components will be highlighted. The challenge to the high-resolution spectroscopy community - as posed by Frank De

  8. The rotational spectrum of IBr

    International Nuclear Information System (INIS)

    Tiemann, E.; Moeller, T.

    1975-01-01

    The microwave spectrum of IBr was measured in the low rotational transition J = 3 → 2 in order to resolve the hyperfine structure as completely as possible. Rotational constants and quadrupole coupling constants were derived for both nuclei. The observation of the rotational spectrum in different vibrational states yields the vibrational dependence of the rotational constants as well as of the hyperfine parameters. The Dunham potential coefficients α 0 , α 1 , α 2 , α 3 are given. (orig.) [de

  9. Snakes and spin rotators

    International Nuclear Information System (INIS)

    Lee, S.Y.

    1990-01-01

    The generalized snake configuration offers advantages of either shorter total snake length and smaller orbit displacement in the compact configuration or the multi-functions in the split configuration. We found that the compact configuration can save about 10% of the total length of a snake. On other hand, the spilt snake configuration can be used both as a snake and as a spin rotator for the helicity state. Using the orbit compensation dipoles, the spilt snake configuration can be located at any distance on both sides of the interaction point of a collider provided that there is no net dipole rotation between two halves of the snake. The generalized configuration is then applied to the partial snake excitation. Simple formula have been obtained to understand the behavior of the partial snake. Similar principle can also be applied to the spin rotators. We also estimate the possible snake imperfections are due to various construction errors of the dipole magnets. Accuracy of field error of better than 10 -4 will be significant. 2 refs., 5 figs

  10. Pretreatment tables predicting pathologic stage of locally advanced prostate cancer.

    Science.gov (United States)

    Joniau, Steven; Spahn, Martin; Briganti, Alberto; Gandaglia, Giorgio; Tombal, Bertrand; Tosco, Lorenzo; Marchioro, Giansilvio; Hsu, Chao-Yu; Walz, Jochen; Kneitz, Burkhard; Bader, Pia; Frohneberg, Detlef; Tizzani, Alessandro; Graefen, Markus; van Cangh, Paul; Karnes, R Jeffrey; Montorsi, Francesco; van Poppel, Hein; Gontero, Paolo

    2015-02-01

    Pretreatment tables for the prediction of pathologic stage have been published and validated for localized prostate cancer (PCa). No such tables are available for locally advanced (cT3a) PCa. To construct tables predicting pathologic outcome after radical prostatectomy (RP) for patients with cT3a PCa with the aim to help guide treatment decisions in clinical practice. This was a multicenter retrospective cohort study including 759 consecutive patients with cT3a PCa treated with RP between 1987 and 2010. Retropubic RP and pelvic lymphadenectomy. Patients were divided into pretreatment prostate-specific antigen (PSA) and biopsy Gleason score (GS) subgroups. These parameters were used to construct tables predicting pathologic outcome and the presence of positive lymph nodes (LNs) after RP for cT3a PCa using ordinal logistic regression. In the model predicting pathologic outcome, the main effects of biopsy GS and pretreatment PSA were significant. A higher GS and/or higher PSA level was associated with a more unfavorable pathologic outcome. The validation procedure, using a repeated split-sample method, showed good predictive ability. Regression analysis also showed an increasing probability of positive LNs with increasing PSA levels and/or higher GS. Limitations of the study are the retrospective design and the long study period. These novel tables predict pathologic stage after RP for patients with cT3a PCa based on pretreatment PSA level and biopsy GS. They can be used to guide decision making in men with locally advanced PCa. Our study might provide physicians with a useful tool to predict pathologic stage in locally advanced prostate cancer that might help select patients who may need multimodal treatment. Copyright © 2014 European Association of Urology. Published by Elsevier B.V. All rights reserved.

  11. Classical theory of rotational rainbow scattering from uncorrugated surfaces

    International Nuclear Information System (INIS)

    Khodorkovsky, Yuri; Averbukh, Ilya Sh; Pollak, Eli

    2010-01-01

    A classical perturbation theory is developed to study rotational rainbow scattering of molecules from uncorrugated frozen surfaces. Considering the interaction of the rigid rotor with the translational motion towards the surface to be weak allows for a perturbative treatment, in which the known zeroth order motion is that of a freely rotating molecule hitting a surface. Using perturbation theory leads to explicit expressions for the angular momentum deflection function with respect to the initial orientational angle of the rotor that are valid for any magnitude of the initial angular momentum. The rotational rainbows appear as peaks both in the final angular momentum and rotational energy distributions, as well as peaks in the angular distribution, although the surface is assumed to be uncorrugated. The derived analytic expressions are compared with numerical simulation data. Even when the rotational motion is significantly coupled to the translational motion, the predictions of the perturbative treatment remain qualitatively correct.

  12. Experimental/analytical approaches to modeling, calibrating and optimizing shaking table dynamics for structural dynamic applications

    Science.gov (United States)

    Trombetti, Tomaso

    density of the table input and output were estimated using the Bartlett's spectral estimation method. The experimentally-estimated table acceleration transfer functions obtained for different working conditions are correlated with their analytical counterparts. As a result of this comprehensive correlation study, a thorough understanding of the shaking table dynamics and its sensitivities to control and payload parameters is obtained. Moreover, the correlation study leads to a calibrated analytical model of the shaking table of high predictive ability. It is concluded that, in its present conditions, the Rice shaking table is able to reproduce, with a high degree of accuracy, model earthquake accelerations time histories in the frequency bandwidth from 0 to 75 Hz. Furthermore, the exhaustive analysis performed indicates that the table transfer function is not significantly affected by the presence of a large (in terms of weight) payload with a fundamental frequency up to 20 Hz. Payloads having a higher fundamental frequency do affect significantly the shaking table performance and require a modification of the table control gain setting that can be easily obtained using the predictive analytical model of the shaking table. The complete description of a structural dynamic experiment performed using the Rice shaking table facility is also reported herein. The object of this experimentation was twofold: (1) to verify the testing capability of the shaking table and, (2) to experimentally validate a simplified theory developed by the author, which predicts the maximum rotational response developed by seismic isolated building structures characterized by non-coincident centers of mass and rigidity, when subjected to strong earthquake ground motions.

  13. Shouldering the blame for impingement: the rotator cuff continuum

    African Journals Online (AJOL)

    postural abnormalities.5 SIS can be defined as compression of the rotator cuff and ... is often the cause, but an acromial bony spur may occur in older age groups .... Management. Conservative treatment is successful in most patients. Patients.

  14. Cervical spine motion in manual versus Jackson table turning methods in a cadaveric global instability model.

    Science.gov (United States)

    DiPaola, Matthew J; DiPaola, Christian P; Conrad, Bryan P; Horodyski, MaryBeth; Del Rossi, Gianluca; Sawers, Andrew; Bloch, David; Rechtine, Glenn R

    2008-06-01

    A study of spine biomechanics in a cadaver model. To quantify motion in multiple axes created by transfer methods from stretcher to operating table in the prone position in a cervical global instability model. Patients with an unstable cervical spine remain at high risk for further secondary injury until their spine is adequately surgically stabilized. Previous studies have revealed that collars have significant, but limited benefit in preventing cervical motion when manually transferring patients. The literature proposes multiple methods of patient transfer, although no one method has been universally adopted. To date, no study has effectively evaluated the relationship between spine motion and various patient transfer methods to an operating room table for prone positioning. A global instability was surgically created at C5-6 in 4 fresh cadavers with no history of spine pathology. All cadavers were tested both with and without a rigid cervical collar in the intact and unstable state. Three headrest permutations were evaluated Mayfield (SM USA Inc), Prone View (Dupaco, Oceanside, CA), and Foam Pillow (OSI, Union City, CA). A trained group of medical staff performed each of 2 transfer methods: the "manual" and the "Jackson table" transfer. The manual technique entailed performing a standard rotation of the supine patient on a stretcher to the prone position on the operating room table with in-line manual cervical stabilization. The "Jackson" technique involved sliding the supine patient to the Jackson table (OSI, Union City, CA) with manual in-line cervical stabilization, securing them to the table, then initiating the table's lock and turn mechanism and rotating them into a prone position. An electromagnetic tracking device captured angular motion between the C5 and C6 vertebral segments. Repeated measures statistical analysis was performed to evaluate the following conditions: collar use (2 levels), headrest (3 levels), and turning technique (2 levels). For all

  15. CISM Course on Rotating Fluids

    CERN Document Server

    1992-01-01

    The volume presents a comprehensive overview of rotation effects on fluid behavior, emphasizing non-linear processes. The subject is introduced by giving a range of examples of rotating fluids encountered in geophysics and engineering. This is then followed by a discussion of the relevant scales and parameters of rotating flow, and an introduction to geostrophic balance and vorticity concepts. There are few books on rotating fluids and this volume is, therefore, a welcome addition. It is the first volume which contains a unified view of turbulence in rotating fluids, instability and vortex dynamics. Some aspects of wave motions covered here are not found elsewhere.

  16. COMMISSIONING SPIN ROTATORS IN RHIC

    International Nuclear Information System (INIS)

    MACKAY, W.W.; AHRENS, L.; BAI, M.; COURANT, E.D.; FISCHER, W.; HUANG, H.; LUCCIO, A.; MONTAG, C.; PILAT, F.; PTITSYN, V.; ROSER, T.; SATOGATA, T.; TRBOJEVIC, D.; VANZIEJTS, J.

    2003-01-01

    During the summer of 2002, eight superconducting helical spin rotators were installed into RHIC in order to control the polarization directions independently at the STAR and PHENIX experiments. Without the rotators, the orientation of polarization at the interaction points would only be vertical. With four rotators around each of the two experiments, we can rotate either or both beams from vertical into the horizontal plane through the interaction region and then back to vertical on the other side. This allows independent control for each beam with vertical, longitudinal, or radial polarization at the experiment. In this paper, we present results from the first run using the new spin rotators at PHENIX

  17. EFFECT OF PRE-HEAT TREATMENT ON MECHANICAL PROPERTIES OF Ti-6Al-4V WELDS

    Directory of Open Access Journals (Sweden)

    Gnofam Jacques TCHEIN

    2016-11-01

    Full Text Available The work presented here is related to the optimization of the Friction Stir Welding (FSW process. The objective is to study the influence of some parameters used in the production of welded joints by FSW. The most important parameters are the welding speed and the rotational speed of the tool. The effect of pre-heat treatment on the plates to be welded is also studied by the design of experimental methods. These pre-heat treatments result not only in a change of mechanical properties of plates to be welded, but also of their microstructure. The experiments were performed following a 16 lines fractional Taguchi table.

  18. Scenario-based table top simulations

    DEFF Research Database (Denmark)

    Broberg, Ole; Edwards, Kasper; Nielsen, J.

    2012-01-01

    This study developed and tested a scenario-based table top simulation method in a user-driven innovation setting. A team of researchers worked together with a user group of five medical staff members from the existing clinic. Table top simulations of a new clinic were carried out in a simple model...

  19. 21 CFR 892.1980 - Radiologic table.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Radiologic table. 892.1980 Section 892.1980 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1980 Radiologic table. (a) Identification. A radiologic...

  20. Nuttall Oak Volume and Weight Tables

    Science.gov (United States)

    Bryce E. Schlaegel; Regan B. Willson

    1983-01-01

    Volume and weight tables were constructed from a 62-tree sample of Nuttall oak (Quercus nuttallii Palmer) taken in the Mississippi Delta. The tables present volume, green weight, and dry weight of bole wood, bole wood plus bark, and total tree above a one-foot stump as predicted from the nonlinear model Y = 0Db

  1. CREATING INPUT TABLES FROM WAPDEG FOR RIP

    International Nuclear Information System (INIS)

    K.G. Mon

    1998-01-01

    The purpose of this calculation is to create tables for input into RIP ver. 5.18 (Integrated Probabilistic Simulator for Environmental Systems) from WAPDEG ver. 3.06 (Waste Package Degradation) output. This calculation details the creation of the RIP input tables for TSPA-VA REV.00

  2. Solar Cell Efficiency Tables (Version 51)

    Energy Technology Data Exchange (ETDEWEB)

    Levi, Dean H [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Green, Martin A. [University of New South Wales; Hishikawa, Yoshihiro [National Institute of Advanced Industrial Science and Technology (AIST); Dunlop, Ewan D. [European Commission-Joint Research Centre; Hohl-Ebinger, Jochen [Fraunhofer Institute for Solar Energy Systems; Ho-Baillie, Anita W. Y. [University of New South Wales

    2017-12-14

    Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined and new entries since July 2017 are reviewed, together with progress over the last 25 years. Appendices are included documenting area definitions and also listing recognised test centres.

  3. Online Periodic Table: A Cautionary Note

    Science.gov (United States)

    Izci, Kemal; Barrow, Lloyd H.; Thornhill, Erica

    2013-01-01

    The purpose of this study was (a) to evaluate ten online periodic table sources for their accuracy and (b) to compare the types of information and links provided to users. Limited studies have been reported on online periodic table (Diener and Moore 2011; Slocum and Moore in "J Chem Educ" 86(10):1167, 2009). Chemistry students'…

  4. Relating Functional Groups to the Periodic Table

    Science.gov (United States)

    Struyf, Jef

    2009-01-01

    An introduction to organic chemistry functional groups and their ionic variants is presented. Functional groups are ordered by the position of their specific (hetero) atom in the periodic table. Lewis structures are compared with their corresponding condensed formulas. (Contains 5 tables.)

  5. Des tables pascales aux tables astronomiques et retour.

    Directory of Open Access Journals (Sweden)

    Max Lejbowicz

    2006-05-01

    Full Text Available L’article étudie la naissance et le développement du calendrier ecclésiastique chrétien, i. e. le comput, depuis les premiers témoignages de la célébration annuelle de la résurrection de Jésus jusqu’aux traductions des tables astronomiques arabes au xiie siècle. Il privilégie les procédures qui aboutissent à la détermination des dates pascales et à leur mise en forme tabulaire. Les analyses sont conduites à partir d’un double point de vue. L’un est scientifique. Il s’appuie sur les données astronomiques retenues par Ptolémée et sur l’apport de la tradition mathématique grecque au calcul par approximations. Les cycles soli-lunaires sont posés à partir des fractions continues et le cycle soli-hebdomadaire à partir du plus petit commun multiple. Le second point de vue est social : l’unification du comput participe à celle de la chrétienté comprise comme une configuration politico-religieuse. Deux conclusions s’imposent. Quelle que soit l’importance que la civilisation médiévale a attribuée au comput, il reste que : 1 / les Pâques sont porteuses de significations irréductibles aux techniques chronométriques qui inscrivent cette fête dans le déroulement de l’année ; 2 / ces techniques ont toutefois marqué profondément les curiosités intellectuelles des Latins et les ont préparé à accueillir avec ferveur les zīj et la numération de position.The article studies the birth and development of the Christian ecclesiastical calendar, i.e. the computus, from the first witnesses to the yearly celebration of the resurrection of Jesus to the translations of arabic astronomical tables in the 12th century. It focuses on the procedures which resulted in determinig the dates of Easter and their being put into tabular form. These analyses were undertaken from two perspectives. One was scientific, relying on the astronomical data preserved by Ptolemy and on the contribution of the Greek mathematical

  6. A Classification Table for Achondrites

    Science.gov (United States)

    Chennaoui-Aoudjehane, H.; Larouci, N.; Jambon, A.; Mittlefehldt, D. W.

    2014-01-01

    Classifying chondrites is relatively easy and the criteria are well documented. It is based on mineral compositions, textural characteristics and more recently, magnetic susceptibility. It can be more difficult to classify achondrites, especially those that are very similar to terrestrial igneous rocks, because mineralogical, textural and compositional properties can be quite variable. Achondrites contain essentially olivine, pyroxenes, plagioclases, oxides, sulphides and accessory minerals. Their origin is attributed to differentiated parents bodies: large asteroids (Vesta); planets (Mars); a satellite (the Moon); and numerous asteroids of unknown size. In most cases, achondrites are not eye witnessed falls and some do not have fusion crust. Because of the mineralogical and magnetic susceptibility similarity with terrestrial igneous rocks for some achondrites, it can be difficult for classifiers to confirm their extra-terrestrial origin. We -as classifiers of meteorites- are confronted with this problem with every suspected achondrite we receive for identification. We are developing a "grid" of classification to provide an easier approach for initial classification. We use simple but reproducible criteria based on mineralogical, petrological and geochemical studies. We presented the classes: acapulcoites, lodranites, winonaites and Martian meteorites (shergottite, chassignites, nakhlites). In this work we are completing the classification table by including the groups: angrites, aubrites, brachinites, ureilites, HED (howardites, eucrites, and diogenites), lunar meteorites, pallasites and mesosiderites. Iron meteorites are not presented in this abstract.

  7. Radiation on the dining table

    International Nuclear Information System (INIS)

    Rossi, Laura; Watson, Dana; Escandarani, Soledad; Miranda, Andrea; Troncoso, Alcides

    2009-01-01

    Zero tolerance to bacterial contamination means considering the acceptance of 'radiation on the table'. The process of food irradiation has been extensively studied, nevertheless its use remains a matter of some controversy. Despite unanimous agreement within the medical community of the safety of this procedure, occasional concerns arise from the consumers. A common consumer misconception is that irradiation may turn the food 'radioactive'. A significant number of scientific studies on the topic were analyzed. We found no scientific study demonstrating that consumption of irradiated food might pose a risk to consumers. All studies conclude that food irradiation at the appropriate dose required to reduce contamination is safe and does not affect its nutritional value. In order to emphasize the issue we discuss the potential benefit vs harm of irradiation of food contaminated with E. coli 0157: H7. The association of this bacteria with severe disease and death has been clearly established in contrast with the lack of a demonstrated risk due to meat irradiation. We conclude that the risks of food irradiation remains 'unknown' simply because, after four decades of research, none has been identified. In contrast to the risks of acquiring a food transmitted bacterial disease, the risk of irradiation is negligible

  8. Isomers chart; Table des isomeres

    Energy Technology Data Exchange (ETDEWEB)

    Dupont-Gautier, P; Chantelot, S; Moisson, N [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The nuclear isomers are nuclides offering the same mass number and the same atomic number, but different energy levels. In the following chart the zero energy ground states are omitted and the metastable isomers, i.e. of non-zero energy, known and of measurable lifetime, are listed. The lower limit of this lifetime was set here to 0.1 x 10{sup -6} s. The various isomers were classified in increasing lifetimes. (authors) [French] Les isomeres nucleaires sont des nucleides presentant le meme nombre de masse et le meme numero atomique, mais des niveaux energetiques differents. Dans la table suivante, on a neglige les etats fondamentaux d'energie nulle et on a recense les isomeres metastables, c'est-a-dire d'energie non nulle, connus et de periode mesurable. La limite inferieure de cette periode a ete fixee ici a 0,1 x 10{sup -6} s. Les differents isomeres ont ete classes par periodes croissantes. (auteurs)

  9. Isomers chart; Table des isomeres

    Energy Technology Data Exchange (ETDEWEB)

    Dupont-Gautier, P.; Chantelot, S.; Moisson, N. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The nuclear isomers are nuclides offering the same mass number and the same atomic number, but different energy levels. In the following chart the zero energy ground states are omitted and the metastable isomers, i.e. of non-zero energy, known and of measurable lifetime, are listed. The lower limit of this lifetime was set here to 0.1 x 10{sup -6} s. The various isomers were classified in increasing lifetimes. (authors) [French] Les isomeres nucleaires sont des nucleides presentant le meme nombre de masse et le meme numero atomique, mais des niveaux energetiques differents. Dans la table suivante, on a neglige les etats fondamentaux d'energie nulle et on a recense les isomeres metastables, c'est-a-dire d'energie non nulle, connus et de periode mesurable. La limite inferieure de cette periode a ete fixee ici a 0,1 x 10{sup -6} s. Les differents isomeres ont ete classes par periodes croissantes. (auteurs)

  10. Harvest of table olives by mechanical harvesting equipment

    Directory of Open Access Journals (Sweden)

    Filippo Gambella

    2013-09-01

    Full Text Available In this work, we have evaluated the performance, of an electric comb equipped with five undulated fingers used for mechanized the harvesting of table olives. The first aim of the work was to test three different types of coating materials used for covering the fingers: Silicon (S, Vulcanized rubber (VR and Natural rubber (NR. The diameter of the coating materials tested were 7mm (D1, 14 mm (D2, 19 mm (D3 in order to evaluate the damage of different working conditions on the intact olives. During harvesting, silicon at 7mm and 14mm resulted in the largest percentage of undamaged the fruit (67% and 65%, natural rubber 63% and vulcanized rubber at the 54%. The second aim was to evaluate the combination, in terms of the best performance, of the machines used for mechanized harvesting of table olives. Several factors have been examined: undulating fingers variation thickness, different rotational speeds and different coating materials used to reduce the impact damage on olives. From the tests on olive tree we have determined that while plastic materials (S and (NR appear to have a positive role in harvest quality, the vibration transmitted to the operator’s hand is great from 6.48 m/s2 for S to 6.31 m/ s2 for NR and 2.92 m/s2 for VR, respect to the materials used.

  11. CONFERENCE: Muon spin rotation

    Energy Technology Data Exchange (ETDEWEB)

    Karlsson, Erik

    1986-11-15

    An international physics conference centred on muons without a word about leptons, weak interactions, EMC effects, exotic decay modes or any other standard high energy physics jargon. Could such a thing even have been imagined ten years ago? Yet about 120 physicists and chemists from 16 nations gathered at the end of June in Uppsala (Sweden) for their fourth meeting on Muon Spin Rotation, Relaxation and Resonance, without worrying about the muon as an elementary particle. This reflects how the experimental techniques based on the muon spin interactions have reached maturity and are widely recognized by condensed matter physicists and specialized chemists as useful tools.

  12. Autonomous quantum rotator

    DEFF Research Database (Denmark)

    Fogedby, Hans C.; Imparato, Alberto

    2018-01-01

    to a directed rotary motion. At variance with the classical case, the thermal fluctuations in the baths give rise to a non-vanishing average torque contribution; this is a genuine quantum effect akin to the Casimir effect. In the steady state the heat current flowing between the two baths is systematically......, the rotator cannot work either as a heat pump or as a heat engine. We finally use our exact results to extend an ab initio quantum simulation algorithm to the out-of-equilibrium regime. Copyright (C) EPLA, 2018...

  13. Rotating specimen rack repair

    International Nuclear Information System (INIS)

    Miller, G.E.; Rogers, P.J.; Nabor, W.G.; Bair, H.

    1984-01-01

    In 1980, an operator at the UCI TRIGA Reactor noticed difficulties with the rotation of the specimen rack. Investigations showed that the drive bearing in the rack had failed and allowed the bearings to enter the rack. After some time of operation in static mode it was decided that installation of a bearing substitute - a graphite sleeve - would be undertaken. Procedures were written and approved for removal of the rack, fabrication and installation of the sleeve, and re-installation of the rack. This paper describes these procedures in some detail. Detailed drawings of the necessary parts may be obtained from the authors

  14. Rotational anomalies without anyons

    International Nuclear Information System (INIS)

    Hagen, C.R.

    1985-01-01

    A specific field theory is proposed in two spatial dimensions which has anomalous rotational properties. Although this might be expected to lead to a concrete realization of what Wilczek refers to as the anyon, it is shown by utilizing the transformation properties of the system and the statistics of the underlying charge fields that anyonic interpolations between bosons and fermions do not occur. This leads to the suggestion that anyons inferred from semiclassical considerations will not survive the transition to a fully relativistic field theory

  15. Motion in the unstable cervical spine: comparison of manual turning and use of the Jackson table in prone positioning.

    Science.gov (United States)

    Bearden, Brook G; Conrad, Bryan P; Horodyski, Marybeth; Rechtine, Glenn R

    2007-08-01

    The purpose of this study was to compare manual maneuvering with the use of a Jackson table when moving patients with cervical spine instability from the supine to the surgically appropriate prone position. The range of motion (ROM) of the cervical spine of a fresh cadaver was measured. A ligamentous instability was created at the C5-6 level, and the increased ROM was confirmed. Sensors for an electromagnetic motion analysis device were fixed to the anterior portions of the C-5 and C-6 vertebral bodies (VBs) using machined polyethylene mounts and carbon fiber rods that were inserted into the VBs. The sensors were used to measure cervical flexion, lateral bending, and axial rotation during the two transfer procedures. The cadaver was then moved from the supine position on a hospital bed to the prone position for surgery. The manual technique was performed by four trained individuals who moved the cadaver from the hospital bed while rotating it 180 degrees axially onto the surgical table. In using the Jackson table, the cadaver was moved from the bed to the table in the supine position and then the Jackson table rotated the cadaver to the prone position. The two techniques were tested with and without the use of a collar and were repeated five times. Analysis of the data indicated that when moving a patient into the prone surgical position, the use of a cervical collar and the Jackson table significantly reduced the cervical motion in all angular planes compared with that of manual transfer. The use of a cervical collar and the Jackson table may reduce the possibility of further spinal cord compromise. Because manual transfers are performed routinely, this warrants further study.

  16. Thermodynamic properties of mineral compounds (tables); Proprietes thermodynamiques des composes mineraux (tables)

    Energy Technology Data Exchange (ETDEWEB)

    Perrot, P. [Lille-1 Univ., Lab. de Metallurgie Physique, UMR CNRS 8517, 59 - Villeneuve-d' Ascq (France)

    2005-10-01

    This article presents, in the form of tables, the thermodynamic data necessary for the calculation of equilibrium constants of reactions between mineral compounds (Rb, Re, Ru, S, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Tc, Te, Th, Ti, Tl, Tm, U, V, W, Xe, Y, Yb, Zn, and Zr compounds). Table 1 presents the data recommended by Codata; table 2 gives the minimum informations allowing the calculation of an equilibrium constant in first approximation; table 3 allows to take into consideration the thermal capacities. Finally, table 4 gathers the data relative to species in aqueous solution. (J.S.)

  17. Resident away rotations allow adaptive neurosurgical training.

    Science.gov (United States)

    Gephart, Melanie Hayden; Derstine, Pamela; Oyesiku, Nelson M; Grady, M Sean; Burchiel, Kim; Batjer, H Hunt; Popp, A John; Barbaro, Nicholas M

    2015-04-01

    Subspecialization of physicians and regional centers concentrate the volume of certain rare cases into fewer hospitals. Consequently, the primary institution of a neurological surgery training program may not have sufficient case volume to meet the current Residency Review Committee case minimum requirements in some areas. To ensure the competency of graduating residents through a comprehensive neurosurgical education, programs may need for residents to travel to outside institutions for exposure to cases that are either less common or more regionally focused. We sought to evaluate off-site rotations to better understand the changing demographics and needs of resident education. This would also allow prospective monitoring of modifications to the neurosurgery training landscape. We completed a survey of neurosurgery program directors and query of data from the Accreditation Council of Graduate Medical Education to characterize the current use of away rotations in neurosurgical education of residents. We found that 20% of programs have mandatory away rotations, most commonly for exposure to pediatric, functional, peripheral nerve, or trauma cases. Most of these rotations are done during postgraduate year 3 to 6, lasting 1 to 15 months. Twenty-six programs have 2 to 3 participating sites and 41 have 4 to 6 sites distinct from the host program. Programs frequently offset potential financial harm to residents rotating at a distant site by support of housing and transportation costs. As medical systems experience fluctuating treatment paradigms and demographics, over time, more residency programs may adapt to meet the Accreditation Council of Graduate Medical Education case minimum requirements through the implementation of away rotations.

  18. Atrial Fibrillation: Treatment

    Science.gov (United States)

    ... of this page please turn JavaScript on. Feature: Atrial Fibrillation Atrial Fibrillation: Treatment Past Issues / Winter 2015 Table of Contents Treatment for atrial fibrillation depends on how often you have symptoms, how ...

  19. Quality assurance system to correct for errors arising from couch rotation in linac-based stereotactic radiosurgery

    International Nuclear Information System (INIS)

    Brezovich, Ivan A.; Pareek, Prem N.; Plott, W. Eugene; Jennelle, Richard L. S.

    1997-01-01

    Purpose: The purpose of this project was the development of a quality assurance (QA) system that would provide geographically accurate targeting for linac-based stereotactic radiosurgery (LBSR). Methods and Materials: The key component of our QA system is a novel device (Alignment Tool) for expedient measurement of gantry and treatment table excursions (wobble) during rotation. The Alignment Tool replaces the familiar pencil-shaped pointers with a ball pointer that is used with the field light of the accelerator to indicate alignment of beam and target. Wobble is measured prior to each patient treatment and analyzed together with the BRW coordinates of the target by a spreadsheet. The corrections required to compensate for any imprecision are identified, and a printout generated indicating the floor stand coordinates for each couch angle used to place the target at isocenter. Results: The Alignment Tool has an inherent accuracy of measurement better than 0.1 mm. The overall targeting error of our QA method, found by evaluating 177 target simulator films of 55 foci in 40 randomly selected patients, was 0.47 ± 0.23 mm. The Alignment Tool was also valuable during installation of the floor stand and a supplemental collimator for the accelerator. Conclusions: The QA procedure described allows accurate targeting in LBSR, even when couch rotation is imprecise. The Alignment Tool can facilitate the installation of any stereotactic irradiation system, and can be useful for annual QA checks as well as in the installation and commissioning of new accelerators

  20. Some Reflections on the Periodic Table and Its Use.

    Science.gov (United States)

    Fernelius, W. Conard

    1986-01-01

    Discusses early periodic tables; effect on the periodic table of atomic numbers; the periodic table in relation to electron distribution in the atoms of elements; terms and concepts related to the table; and the modern basis of the periodic table. Additional comments about these and other topics are included. (JN)

  1. Ankle Sprains. A Round Table.

    Science.gov (United States)

    Physician and Sportsmedicine, 1986

    1986-01-01

    Types of ankle sprains, surgical versus nonsurgical treatment, tape versus brace for support, rehabilitation, exercise, and prevention of ankle sprains are discussed by a panel of experts. An acute ankle taping technique is illustrated. (MT)

  2. Current Biomechanical Concepts of Suture Bridge Repair Technique for Rotator Cuff Tear

    OpenAIRE

    Ming-Long Yeh; Chih-Kai Hong; Wei-Ren Su; I-Ming Jou; Cheng-Li Lin; Chii-Jen Lin

    2015-01-01

    Rotator cuff tears are one of the most common disorders of the shoulder and can have significant effects on daily activities as a result of pain, loss of motion and strength. The goal of rotator cuff repair is aimed at anatomic restoration of the rotator cuff tendon to reduce pain and improve the joint function. Recently, arthroscopic repair has been widely accepted for treatment of rotator cuff tears due to its equal or better results than those from open repair. In 2006, a...

  3. Rotator Cuff Repair in Adolescent Athletes.

    Science.gov (United States)

    Azzam, Michael G; Dugas, Jeffrey R; Andrews, James R; Goldstein, Samuel R; Emblom, Benton A; Cain, E Lyle

    2018-04-01

    Rotator cuff tears are rare injuries in adolescents but cause significant morbidity if unrecognized. Previous literature on rotator cuff repairs in adolescents is limited to small case series, with few data to guide treatment. Adolescent patients would have excellent functional outcome scores and return to the same level of sports participation after rotator cuff repair but would have some difficulty with returning to overhead sports. Case series; Level of evidence 4. A retrospective search of the practice's billing records identified all patients participating in at least 1 sport who underwent rotator cuff repair between 2006 and 2014 with an age Rotator Cuff Index. Thirty-two consecutive adolescent athletes (28 boys and 4 girls) with a mean age of 16.1 years (range, 13.2-17.9 years) met inclusion criteria. Twenty-nine patients (91%) had a traumatic event, and 27 of these patients (93%) had no symptoms before the trauma. The most common single tendon injury was to the supraspinatus (21 patients, 66%), of which 2 were complete tendon tears, 1 was a bony avulsion of the tendon, and 18 were high-grade partial tears. Fourteen patients (56%) underwent single-row repair of their rotator cuff tear, and 11 (44%) underwent double-row repair. All subscapularis injuries were repaired in open fashion, while all other tears were repaired arthroscopically. Twenty-seven patients (84%) completed the outcome questionnaires at a mean 6.2 years after surgery (range, 2-10 years). The mean ASES score was 93 (range, 65-100; SD = 9); mean Western Ontario Rotator Cuff Index, 89% (range, 60%-100%; SD = 13%); and mean numeric pain rating, 0.3 (range, 0-3; SD = 0.8). Overall, 25 patients (93%) returned to the same level of play or higher. Among overhead athletes, 13 (93%) were able to return to the same level of play, but 8 (57%) were forced to change positions. There were no surgical complications, but 2 patients did undergo a subsequent operation. Surgical repair of high-grade partial

  4. Authenticated hash tables

    DEFF Research Database (Denmark)

    Triandopoulos, Nikolaos; Papamanthou, Charalampos; Tamassia, Roberto

    2008-01-01

    Hash tables are fundamental data structures that optimally answer membership queries. Suppose a client stores n elements in a hash table that is outsourced at a remote server so that the client can save space or achieve load balancing. Authenticating the hash table functionality, i.e., verifying...... to a scheme that achieves different trade-offs---namely, constant update time and O(nε/logκε n) query time for fixed ε > 0 and κ > 0. An experimental evaluation of our solution shows very good scalability....

  5. The 2005 CHF look-up table

    International Nuclear Information System (INIS)

    Groeneveld, D.C.; Vasic, A.Z.; Leung, L.K.H.; Durmayaz, A.; Shan, J.Q.; Yang, J.; Cheng, S.C.

    2005-01-01

    Full text of publication follows: CHF Look-up tables have been used widely for the prediction of the Critical Heat Flux (CHF) The CHF look-up table is basically a normalized data bank. The first CHF look-up table was constructed by Doroshchuk et al. (1975), using a limited database of 5 000 data points. This table, and all subsequent tables, contain normalized CHF values for a vertical 8 mm water-cooled tube for various pressures, mass fluxes and qualities. The CHF table development work has since been in progress at various institutions (e.g. CENG-Grenoble, University of Ottawa (UO), Ottawa, IPPE, Obninsk, and AECL, Chalk River) using an ever increasing data base. The 1995 CHF look-up table employs a data base containing about 30 000 CHF points and provides CHF values for an 8 mm ID, water-cooled tube, for 19 pressures, 20 mass fluxes, and 23 qualities. covering the full range of conditions of practical interest. The 2005 CHF LUT is an update to the 1995 LUT and addresses several concerns raised in the literature. The major improvements made are: - enhancement of the quality of the data base of the CHF look-up table (identify outliers, improve screening procedures); - increase in the data base by adding recently obtained data; - employment of greater subdivision of the look-up table by using smaller intervals in the independent parameters (pressure, mass flux and quality) at conditions where the variation in CHF is significant; - improvement of the smoothness of the CHF look-up table. This was done by the use of logarithmic functions for CHF, using optimum Spline functions etc. A discussion of the impact of these changes on the prediction accuracy and table smoothness is presented. It will be shown that the 2005 CHF look-up table is characterized by a significant improvement in accuracy and smoothness. [1] D. Groeneveld is the corresponding author. He is an Adjunct Professor at the University of Ottawa. (authors)

  6. General-purpose radiographic and fluoroscopic table

    International Nuclear Information System (INIS)

    Ishizaki, Noritaka

    1982-01-01

    A new series of diagnostic tables, Model DT-KEL, was developed for general-purpose radiographic and fluoroscopic systems. Through several investigations, the table was so constructed that the basic techniques be general radiography and GI examination, and other techniques be optionally added. The diagnostic tables involve the full series of the type for various purposes and are systematized with the surrounding equipment. A retractable mechanism of grids was adopted first for general use. The fine grids with a density of 57 lines per cm, which was adopted in KEL-2, reduced the X-ray doses by 16 percent. (author)

  7. Lunar Rotation, Orientation and Science

    Science.gov (United States)

    Williams, J. G.; Ratcliff, J. T.; Boggs, D. H.

    2004-12-01

    The Moon is the most familiar example of the many satellites that exhibit synchronous rotation. For the Moon there is Lunar Laser Ranging measurements of tides and three-dimensional rotation variations plus supporting theoretical understanding of both effects. Compared to uniform rotation and precession the lunar rotational variations are up to 1 km, while tidal variations are about 0.1 m. Analysis of the lunar variations in pole direction and rotation about the pole gives moment of inertia differences, third-degree gravity harmonics, tidal Love number k2, tidal dissipation Q vs. frequency, dissipation at the fluid-core/solid-mantle boundary, and emerging evidence for an oblate boundary. The last two indicate a fluid core, but a solid inner core is not ruled out. Four retroreflectors provide very accurate positions on the Moon. The experience with the Moon is a starting point for exploring the tides, rotation and orientation of the other synchronous bodies of the solar system.

  8. A compact rotating dilution refrigerator

    Science.gov (United States)

    Fear, M. J.; Walmsley, P. M.; Chorlton, D. A.; Zmeev, D. E.; Gillott, S. J.; Sellers, M. C.; Richardson, P. P.; Agrawal, H.; Batey, G.; Golov, A. I.

    2013-10-01

    We describe the design and performance of a new rotating dilution refrigerator that will primarily be used for investigating the dynamics of quantized vortices in superfluid 4He. All equipment required to operate the refrigerator and perform experimental measurements is mounted on two synchronously driven, but mechanically decoupled, rotating carousels. The design allows for relative simplicity of operation and maintenance and occupies a minimal amount of space in the laboratory. Only two connections between the laboratory and rotating frames are required for the transmission of electrical power and helium gas recovery. Measurements on the stability of rotation show that rotation is smooth to around 10-3 rad s-1 up to angular velocities in excess of 2.5 rad s-1. The behavior of a high-Q mechanical resonator during rapid changes in rotation has also been investigated.

  9. Wormholes immersed in rotating matter

    Directory of Open Access Journals (Sweden)

    Christian Hoffmann

    2018-03-01

    Full Text Available We demonstrate that rotating matter sets the throat of an Ellis wormhole into rotation, allowing for wormholes which possess full reflection symmetry with respect to the two asymptotically flat spacetime regions. We analyze the properties of this new type of rotating wormholes and show that the wormhole geometry can change from a single throat to a double throat configuration. We further discuss the ergoregions and the lightring structure of these wormholes.

  10. Internal rotation of the Sun

    International Nuclear Information System (INIS)

    Duvall, T.L. Jr.; Goode, P.R.; Gouch, D.O.

    1984-01-01

    The frequency difference between prograde and retrograde sectoral solar oscillations is analysed to determine the rotation rate of the solar interior, assuming no latitudinal dependence. Much of the solar interior rotates slightly less rapidly than the surface, while the innermost part apparently rotates more rapidly. The resulting solar gravitational quadrupole moment is J 2 = (1.7 +- 0.4) x 10 -7 and provides a negligible contribution to current planetary tests of Einstein's theory of general relativity. (author)

  11. Diagnostic imaging of shoulder rotator cuff lesions

    Directory of Open Access Journals (Sweden)

    Nogueira-Barbosa Marcello Henrique

    2002-01-01

    Full Text Available Shoulder rotator cuff tendon tears were evaluated with ultrasonography (US and magnetic resonance imaging (MRI. Surgical or arthroscopical correlation were available in 25 cases. Overall costs were also considered. Shoulder impingement syndrome diagnosis was done on a clinical basis. Surgery or arthroscopy was considered when conservative treatment failure for 6 months, or when rotator cuff repair was indicated. Ultrasound was performed in 22 patients and MRI in 17 of the 25 patients. Sensitivity, specificity and accuracy were 80%, 100% and 90.9% for US and 90%, 100% and 94.12% for MRI, respectively. In 16 cases both US and MRI were obtained and in this subgroup statistical correlation was excellent (p< 0.001. We concluded that both methods are reliable for rotator cuff full thickness tear evaluation. Since US is less expensive, it could be considered as the screening method when rotator cuff integrity is the main question, and when well trained radiologists and high resolution equipment are available.

  12. Biomaterials based strategies for rotator cuff repair.

    Science.gov (United States)

    Zhao, Song; Su, Wei; Shah, Vishva; Hobson, Divia; Yildirimer, Lara; Yeung, Kelvin W K; Zhao, Jinzhong; Cui, Wenguo; Zhao, Xin

    2017-09-01

    Tearing of the rotator cuff commonly occurs as among one of the most frequently experienced tendon disorders. While treatment typically involves surgical repair, failure rates to achieve or sustain healing range from 20 to 90%. The insufficient capacity to recover damaged tendon to heal to the bone, especially at the enthesis, is primarily responsible for the failure rates reported. Various types of biomaterials with special structures have been developed to improve tendon-bone healing and tendon regeneration, and have received considerable attention for replacement, reconstruction, or reinforcement of tendon defects. In this review, we first give a brief introduction of the anatomy of the rotator cuff and then discuss various design strategies to augment rotator cuff repair. Furthermore, we highlight current biomaterials used for repair and their clinical applications as well as the limitations in the literature. We conclude this article with challenges and future directions in designing more advanced biomaterials for augmentation of rotator cuff repair. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Earth's variable rotation

    Science.gov (United States)

    Hide, Raymond; Dickey, Jean O.

    1991-01-01

    Recent improvements in geodetic data and practical meteorology have advanced research on fluctuations in the earth's rotation. The interpretation of these fluctuations is inextricably linked with studies of the dynamics of the earth-moon system and dynamical processes in the liquid metallic core of the earth (where the geomagnetic field originates), other parts of the earth's interior, and the hydrosphere and atmosphere. Fluctuations in the length of the day occurring on decadal time scales have implications for the topographay of the core-mantle boundary and the electrical, magnetic, ande other properties of the core and lower mantle. Investigations of more rapid fluctuations bear on meteorological studies of interannual, seasonal, and intraseasonal variations in the general circulation of the atmosphere and the response of the oceans to such variations.

  14. Sporcularda rotator cuff problemleri

    OpenAIRE

    Guven, Osman; Guven, Zeynep; Gundes, Hakan; Yalcin, Selim

    2004-01-01

    Rotator cuff tendinitinin etyolojisinde genellikle birden çok faktörün kombinasyonu görülür. Yüzme, raket sporları ve fırlatma sporlarının özellikle gelişmiş ülkelerde giderek yaygınlaşması bu konuya olan ilginin artmasına sebep olmuştur. Eski konseptlerde aktif bir sporcuda tedavinin başarısı genellikle eski atletik seviyesine dönmesi ile ölçülürdü. Son zamanlarda atletik tekniklerin analizi, atroskopik evaluasyon gibi yeni bir Iükse sahip olmamız ve Iiteratürün yeniden gözden geçirilmesi il...

  15. Patients with severe acquired brain injury show increased arousal in tilt-table training

    DEFF Research Database (Denmark)

    Riberholt, Christian G; Thorlund, Jonas Bloch; Mehlsen, Jesper

    2013-01-01

    Patients with severe acquired brain injury (ABI) are often mobilised using a tilt-table. Complications such as orthostatic intolerance have been reported. The primary objective of this study was to investigate if using a tilt-table was feasible for mobilising patients with severe ABI admitted...... for sub-acute rehabilitation. We also investigated change in arousal, treatment duration before termination due to orthostatic reactions and change in muscle tone....

  16. Medicaid Analytic eXtract (MAX) Rx Table Listing

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Statistical Compendium table listing (below) enables users to choose to view Medicaid prescription drug tables for 1999 - 2009, and to select the tables for the...

  17. Implementation of the probability table method in a continuous-energy Monte Carlo code system

    International Nuclear Information System (INIS)

    Sutton, T.M.; Brown, F.B.

    1998-10-01

    RACER is a particle-transport Monte Carlo code that utilizes a continuous-energy treatment for neutrons and neutron cross section data. Until recently, neutron cross sections in the unresolved resonance range (URR) have been treated in RACER using smooth, dilute-average representations. This paper describes how RACER has been modified to use probability tables to treat cross sections in the URR, and the computer codes that have been developed to compute the tables from the unresolved resonance parameters contained in ENDF/B data files. A companion paper presents results of Monte Carlo calculations that demonstrate the effect of the use of probability tables versus the use of dilute-average cross sections for the URR. The next section provides a brief review of the probability table method as implemented in the RACER system. The production of the probability tables for use by RACER takes place in two steps. The first step is the generation of probability tables from the nuclear parameters contained in the ENDF/B data files. This step, and the code written to perform it, are described in Section 3. The tables produced are at energy points determined by the ENDF/B parameters and/or accuracy considerations. The tables actually used in the RACER calculations are obtained in the second step from those produced in the first. These tables are generated at energy points specific to the RACER calculation. Section 4 describes this step and the code written to implement it, as well as modifications made to RACER to enable it to use the tables. Finally, some results and conclusions are presented in Section 5

  18. 76 FR 62678 - Table Saw Blade Contact Injuries; Advance Notice of Proposed Rulemaking; Request for Comments and...

    Science.gov (United States)

    2011-10-11

    ... reduces the risk of injury. 15 U.S.C. 2058(f)(3). C. The Product Table saws are stationary power tools... identified at least 15 manufacturers and importers of table saws. According to the Power Tool Institute... for medical treatment, lost time from work, product liability litigation, and pain and suffering. The...

  19. New Generation of Los Alamos Opacity Tables

    Science.gov (United States)

    Colgan, James; Kilcrease, D. P.; Magee, N. H.; Sherrill, M. E.; Abdallah, J.; Hakel, P.; Fontes, C. J.; Guzik, J. A.; Mussack, K. A.

    2016-05-01

    We present a new generation of Los Alamos OPLIB opacity tables that have been computed using the ATOMIC code. Our tables have been calculated for all 30 elements from hydrogen through zinc and are publicly available through our website. In this poster we discuss the details of the calculations that underpin the new opacity tables. We also show several recent applications of the use of our opacity tables to solar modeling and other astrophysical applications. In particular, we demonstrate that use of the new opacities improves the agreement between solar models and helioseismology, but does not fully resolve the long-standing `solar abundance' problem. The Los Alamos National Laboratory is operated by Los Alamos National Security, LLC for the National Nuclear Security Administration of the U.S. Department of Energy under Contract No. DE-AC5206NA25396.

  20. RESTAURANT RESERVATION MANAGEMENT CONSIDERING TABLE COMBINATION

    Directory of Open Access Journals (Sweden)

    Qing Miao

    Full Text Available ABSTRACT This paper presents a case study of table reservation practice for restaurant business within Walt Disney World. A unique feature here is to consider table combination to capture revenue potentials from different party sizes and at different time periods. For example, a party of large size can be served by combining two or more small tables. A mixed integer programming (MIP model is developed to make the reservation recommendation. We propose a rolling horizon reservation policy such that the value of a particular table is periodically evaluated and updated. This is a typical revenue management method in the airlines and other industries, the essence of which is to compare the future expected revenue with a currently offered price. Using historical data, numerical test shows a significant revenue improvement potential from our proposed model.

  1. The astronomical tables of Giovanni Bianchini

    CERN Document Server

    Chabas, Jose

    2009-01-01

    This book describes and analyses, for the first time, the astronomical tables of Giovanni Bianchini of Ferrara (d. after 1469), explains their context, inserts them into an astronomical tradition that began in Toledo, and addresses their diffusion.

  2. Installation Torque Tables for Noncritical Applications

    Science.gov (United States)

    Rivera-Rosario, Hazel T.; Powell, Joseph S.

    2017-01-01

    The objective of this project is to define torque values for bolts and screws when loading is not a concern. Fasteners require a certain torque to fulfill its function and prevent failure. NASA Glenn Research Center did not have a set of fastener torque tables for non-critical applications without loads, usually referring to hand-tight or wrench-tight torqueing. The project is based on two formulas, torque and pullout load. Torque values are calculated giving way to preliminary data tables. Testing is done to various bolts and metal plates, torqueing them until the point of failure. Around 640 torque tables were developed for UNC, UNF, and M fasteners. Different lengths of thread engagement were analyzed for the 5 most common materials used at GRC. The tables were put together in an Excel spreadsheet and then formatted into a Word document. The plan is to later convert this to an official technical publication or memorandum.

  3. Improving GRADE evidence tables part 2

    DEFF Research Database (Denmark)

    Langendam, Miranda; Carrasco-Labra, Alonso; Santesso, Nancy

    2016-01-01

    OBJECTIVES: The Grading of Recommendations Assessment, Development, and Evaluation (GRADE) working group has developed GRADE evidence profiles (EP) and summary of findings (SoF) tables to present evidence summaries in systematic reviews, clinical guidelines, and health technology assessments. Exp...

  4. Boat And Shore Oracle Data Tables

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oracle Tables To Provide Boat and Shore Data which contains the object of this system is to provide an inventory of vessels that answer two fundamental questions:...

  5. Ecological periodic tables: In principle and practice

    Science.gov (United States)

    The chemical periodic table, the Linnaean system of classification and the Hertzsprung-Russell diagram are iconic information organizing structure in chemistry, biology and astronomy, respectively, because they are simple, exceptionally useful and they foster the expansion of sci...

  6. Toward an Organic Chemist's Periodic Table.

    Science.gov (United States)

    Hall, H. K., Jr.

    1980-01-01

    An analogy between electron transfer reactions of the elements and those of organic molecules is offered. Examples of organic electron transfer reactions are presented. The rationale of constructing an organic chemists' periodic table is also discussed. (HM)

  7. Theodore William Richards and the Periodic Table

    Science.gov (United States)

    Conant, James B.

    1970-01-01

    Discusses the contribution of Theodore Richards to the accurate determination of atomic weights of copper and other elements; his major contribution was to the building of the definitive periodic table of the elements. (BR)

  8. Cohort Working Life Tables for Older Canadians

    Directory of Open Access Journals (Sweden)

    Spencer, Byron G.

    2010-01-01

    Full Text Available AbstractWe construct cohort working life tables for Canadian men and women aged 50and older and, for comparison, corresponding period tables. The tables arederived using annual single-age time series of participation rates for 1976-2006from the master files of the Statistics Canada Labour Force Survey. The cohortcalculations are based on stochastic projections of mortality coupled withalternative assumptions about future participation rates. Separate tables areprovided for the years 1976, 1991, and 2006, thus spanning a period ofsubstantial gains in life expectancy and strong upward trends in femaleparticipation. Life expectancies based on the cohort tables are greater thanthose based on the period tables, for both men and women, and that is reflectedin increased retirement expectancies. For example, a male aged 50 in 1976could have expected to live three years longer and to have almost four moreyears in retirement, based on the male cohort table under medium assumptions,as compared with the corresponding period table.RésuméNous avons établis des tables de vie active par génération pour les Canadiens etCanadiennes âgés de 50 ans ou plus ainsi que des tables du momentcorrespondantes pour servir de comparaison. Les tables sont dérivées à l'aidede séries chronologiques annuelles d'un seul âge pour le taux d'activité pour lesannées 1976 à 2006 provenant des fichiers maîtres de l'Enquête sur lapopulation active de Statistique Canada. Les calculs par génération sont baséessur des projections stochastiques de mortalité et sur des suppositions quant àde futurs taux d'activité possibles. Des tables séparées ont été établies pour lesannées 1976, 1991 et 2006 ; ce qui représente une période qui a vu des gainssubstantiels en ce qui concerne l'espérance de vie et une forte hausse d'activitéchez les femmes. Les espérance de vie basées sur les tables par génération sontplus élevées que celles basées sur les tables du

  9. Shaking table testing of mechanical components

    International Nuclear Information System (INIS)

    Jurukovski, D.; Taskov, Lj.; Mamucevski, D.; Petrovski, D.

    1995-01-01

    Presented is the experience of the Institute of Earthquake Engineering and Engineering Seismology, Skopje, Republic of Macedonia in seismic qualification of mechanical components by shaking table testing. Technical data and characteristics for the three shaking tables available at the Institute are given. Also, for characteristic mechanical components tested at the Institute laboratories, basic data such as producer, testing investor, description of the component, testing regulation, testing equipment and final user of the results. (author)

  10. Experiences with Interactive Multi-touch Tables

    Science.gov (United States)

    Fikkert, Wim; Hakvoort, Michiel; van der Vet, Paul; Nijholt, Anton

    Interactive multi-touch tables can be a powerful means of communication for collaborative work as well as an engaging environment for competition. Through enticing gameplay we have evaluated user experience on competitive gameplay, collaborative work and musical expression. In addition, we report on our extensive experiences with two types of interactive multi-touch tables and we introduce a software framework that abstracts from their technical differences.

  11. Aplikasi Pembelajaran Table Manners Berbasis Multimedia

    OpenAIRE

    Yosanny, Agustinna; Pradipta, Albert; Viles, Dody; Pensen, Pensen

    2011-01-01

    Table manners adalah aturan-aturan pokok yang berlaku di meja makan. Aturan ini biasanya diterapkan padajamuan makan resmi. Penelitian ini bertujuan untuk merancang dan mengembangkan suatu aplikasipembelajaran tentang table manners untuk memudahkan dalam mempelajari aturan-aturan yang perlu diketahuidalam jamuan makan resmi, meliputi etika sebelum dan saat proses menyantap makanan, serta penggunaanalat-alat makan. Metode penelitian yang digunakan adalah metode Interactive Multimedia System De...

  12. IUPAC Periodic Table of the Isotopes

    Science.gov (United States)

    Holden, N.E.; Coplen, T.B.; Böhlke, J.K.; Wieser, M.E.; Singleton, G.; Walczyk, T.; Yoneda, S.; Mahaffy, P.G.; Tarbox, L.V.

    2011-01-01

    For almost 150 years, the Periodic Table of the Elements has served as a guide to the world of elements by highlighting similarities and differences in atomic structure and chemical properties. To introduce students, teachers, and society to the existence and importance of isotopes of the chemical elements, an IUPAC Periodic Table of the Isotopes (IPTI) has been prepared and can be found as a supplement to this issue.

  13. Listing of Available ACE Data Tables

    Energy Technology Data Exchange (ETDEWEB)

    Conlin, Jeremy Lloyd [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-31

    This document is divided into multiple sections. Section 2 lists some of the more frequently used ENDF/B reaction types that can be used with the FM input card. The remaining sections (described below) contain tables showing the available ACE data tables for various types of data. These ACE data libraries are distributed by the Radiation Safety Information Computational Center (RSICC) with MCNP6.

  14. Surface dimpling on rotating work piece using rotation cutting tool

    Science.gov (United States)

    Bhapkar, Rohit Arun; Larsen, Eric Richard

    2015-03-31

    A combined method of machining and applying a surface texture to a work piece and a tool assembly that is capable of machining and applying a surface texture to a work piece are disclosed. The disclosed method includes machining portions of an outer or inner surface of a work piece. The method also includes rotating the work piece in front of a rotating cutting tool and engaging the outer surface of the work piece with the rotating cutting tool to cut dimples in the outer surface of the work piece. The disclosed tool assembly includes a rotating cutting tool coupled to an end of a rotational machining device, such as a lathe. The same tool assembly can be used to both machine the work piece and apply a surface texture to the work piece without unloading the work piece from the tool assembly.

  15. Nuclear data library table (Version November 1998)

    International Nuclear Information System (INIS)

    Baard, J.H.

    1998-11-01

    This report presents the edition of the Nuclear Data Library Table, valid from 1998-11-01. This library contains data for conversion of activity values to fluence rate and fluence values. The revised table is a modified version of the older library coded 1990-12-12. The older library has been extended with 23 reaction; the special 'background' reaction has been deleted. A table has been incorporated in this report which indicates the changes in this revised library data in comparison to previously used data. The data has been incorporated in this report which indicates the changes in this revised library data in comparison to previously used data. The data are presented as obtained as output from the program SAPNDLT. A table with half-lives of product nuclides is presented; in Appendix 2 these values have been calculated using the decay constants from this library. Surveys of thermal and fast cross sections are given for the various reactions in Appendix 3 and 4 respectively. Also a table with activities per mg mass for a fluence rate of 10 1 8 m -2 .s -1 is presented in Appendix 3 and 4 respectively. Also a table with activities per mg mass for a fluence rate of 10 1 8 m -1 is presented in Appendix 5 for various irradiation intervals. Appendix 6 gives for the various reactions the Kerma rate value. 8 refs

  16. TableMaker: An Excel Macro for Publication-Quality Tables

    Directory of Open Access Journals (Sweden)

    Marek Hlavac

    2016-04-01

    Full Text Available This article introduces TableMaker, a Microsoft Excel macro that produces publicationquality tables and includes them as new sheets in workbooks. The macro provides an intuitive graphical user interface that allows for the full customization of all table features. It also allows users to save and load table templates, and thus allows layouts to be both reproducible and transferable. It is distributed in a single computer file. As such, the macro is easy to share, as well as accessible to even beginning and casual users of Excel. Since it allows for the quick creation of reproducible and fully customizable tables, TableMaker can be very useful to academics, policy-makers and businesses by making the presentation and formatting of results faster and more efficient.

  17. Iso-effect table for radiation tolerance of the human spinal cord

    International Nuclear Information System (INIS)

    Cohen, L.; Creditor, M.

    1981-01-01

    Available literature on radiation injury to the human spinal cord was collected into a comprehensive data set relating the incidence of myelopathy to dosage, number of fractions and total treatment time. The data was analyzed using a search program (RAD3) to derive best-fitting cell kinetic parameters on the assumption that radiation myelopathy arises from cellular depletion in the irradiated tissues. From these parameters iso-effect tables were constructed for a wide range of treatment schedules, including daily treatment as well as fractionation at longer intervals. The tables provide a set of limiting doses, above which the risk of radiation injury to the spinal cord becomes substantial. General application of NSD tolerance limits could lead to systematic overdosage of the spinal cord, especially with large individual fractions or short treatment times. We conclude that the computed iso-effect tables provide a more reliable clinical guide than conventional time-dose equations

  18. Treatment of diffuse in-stent restenosis with rotational atherectomy followed by radiation therapy with a 188Re-MAG3-filled balloon: six-month clinical and angiographic results of R4 registry

    International Nuclear Information System (INIS)

    Moon, D. H.; Oh, S. J.; Park, S. W.; Hong, M. K.; Lee, C. H.; Kim, J. Z.; Park, S. J.; Lee, H. K.

    2000-01-01

    Intracoronary β-irradiation after rotational atherectomy may be a reasonable approach to prevent recurrent in-stent restenosis (ISR). This study was done to evaluate the feasibility and efficacy of β-radiation therapy with a 188 Re-MAG3-filled balloon following rotational atherectomy for ISR. Fifty consecutive patients with diffuse ISR (length >10 mm) in native coronary arteries underwent rotational atherectomy and adjunctive balloon angioplasty followed by β-irradiation using 188 Re-MAG3-filled balloon catheter. The radiation doses was 15 Gy at 1.0 mm deep into vessel wall. Mean length of the lesion and irradiated segment was 25.6±12.7 mm and 37.6±11.2 mm, respectively. The radiation was delivered successfully to all patients, with a mean irradiation time of 20.1±61 7 sec. No adverse event including myocardial infarction, death, or stent thrombosis occurred during the follow-up period (mean 10.3±3.7 mon) and non-target vessel revascularization was needed in one patient. Six-month binary angiographic restenosis rate was 10.4% (2 focal ISR and 3 edge restenosis) and loss index was 0.17±0.31. Irradiation using 188 Re-MAG3-filled balloon following rotational atherectomy for patients with diffuse ISR may improve the clinical and angiographic outcomes. Further prospective randomized trials are warranted to evaluate the synergistic effect of debulking and irradiation in patients with diffuse ISR

  19. Treatment of diffuse in-stent restenosis with rotational atherectomy followed by radiation therapy with a {sup 188}Re-MAG3-filled balloon: six-month clinical and angiographic results of R4 registry

    Energy Technology Data Exchange (ETDEWEB)

    Moon, D. H.; Oh, S. J.; Park, S. W.; Hong, M. K.; Lee, C. H.; Kim, J. Z.; Park, S. J.; Lee, H. K. [College of Medicine, Ulsan Univ., Seoul (Korea, Republic of)

    2000-07-01

    Intracoronary {beta}-irradiation after rotational atherectomy may be a reasonable approach to prevent recurrent in-stent restenosis (ISR). This study was done to evaluate the feasibility and efficacy of {beta}-radiation therapy with a {sup 188}Re-MAG3-filled balloon following rotational atherectomy for ISR. Fifty consecutive patients with diffuse ISR (length >10 mm) in native coronary arteries underwent rotational atherectomy and adjunctive balloon angioplasty followed by {beta}-irradiation using {sup 188}Re-MAG3-filled balloon catheter. The radiation doses was 15 Gy at 1.0 mm deep into vessel wall. Mean length of the lesion and irradiated segment was 25.6{+-}12.7 mm and 37.6{+-}11.2 mm, respectively. The radiation was delivered successfully to all patients, with a mean irradiation time of 20.1{+-}61 7 sec. No adverse event including myocardial infarction, death, or stent thrombosis occurred during the follow-up period (mean 10.3{+-}3.7 mon) and non-target vessel revascularization was needed in one patient. Six-month binary angiographic restenosis rate was 10.4% (2 focal ISR and 3 edge restenosis) and loss index was 0.17{+-}0.31. Irradiation using {sup 188}Re-MAG3-filled balloon following rotational atherectomy for patients with diffuse ISR may improve the clinical and angiographic outcomes. Further prospective randomized trials are warranted to evaluate the synergistic effect of debulking and irradiation in patients with diffuse ISR.

  20. Iso-effect tables and therapeutic ratios for epidermoid cancer and normal tissue stroma

    International Nuclear Information System (INIS)

    Cohen, L.; Creditor, M.

    1983-01-01

    Available literature on radiation injury to normal tissue stroma and ablation of epidermoid carcinoma was surveyed. Computer programs (RAD3 and RAD1) were then used to derive cell kinetic parameters and generate iso-effect tables for the relevant tissues. The two tables provide a set of limiting doses for tolerance of normal connective tissue (16% risk of injury) and for ablation of epidermoid cancer (16% risk of recurrence) covering a wide range of treatment schedules. Calculating the ratios of normal tissue tolerance to tumor control doses for each treatment scheme provides an array of therapeutic ratios, from which appropriate treatment schemes can be selected