WorldWideScience

Sample records for room caracterizacion del

  1. Characterization of the neutron field of the {sup 241}AmBe in a calibration room; Caracterizacion del campo de neutrones del {sup 241} AmBe en una sala para calibracion

    Energy Technology Data Exchange (ETDEWEB)

    Vega C, H.R. [UAZ, A.P. 336, 98000 Zacatecas (Mexico); Gallego, E.; Lorente, A. [Universidad Politecnica de Madrid, C. Jose Gutierrez Abascal 2, 28006 Madrid (Spain)] e-mail: rvega@cantera.reduaz.mx

    2003-07-01

    The field of neutrons produced by an isotopic source of neutrons of {sup 241} Am Be had been characterized. The characterization was carried out modeling those relevant details of the calibration room and simulating the neutron transport at different distances of the source. The calculated spectra were used to determine the equivalent environmental dose rate. A series of experiments were carried out with the Bonner sphere spectrometric system to measure the spectra in the same points where the calculations were carried out and with these spectra the rates of environmental dose were calculated. By means of a one sphere dosemeter type Berthold the rates of environmental dose were measured. To the one to compare the calculated spectra and measured its were found small differences in the group of the thermal neutrons due to the elementary composition used during the simulation. When comparing the derived rates starting from the calculated spectra with those measured it was found a maxim difference smaller to 13%. (Author)

  2. Characterization of the billow applied to Tuxpan, Veracruz; Caracterizacion del oleaje aplicada a Tuxpan, Veracruz

    Energy Technology Data Exchange (ETDEWEB)

    Rosales Sierra, Victor

    1999-07-01

    In this work, the criteria for the wave temporal and spectral statistical analysis were reviewed. These analysis are applied to the site Tuxpan, Veracruz, in the Mexican Gulf coast. In the temporal statistic analysis, the high (Rayleigh, Tayfun and Carter) and period (Bretchneider, Cavanie and Longuet-Higgins) theoretic probability distributions are compared with field data from Tuxpan. In the other hand, in the frequency domain analysis, the theoretic spectrums (Bretchneider-Mitsuyasu, Jonswap-Hasselmann, Pierson-Moscowitz, Neumann, ITTC, ISSC, TMA and Ochi-Hubble) are compared with the one obtained from Tuxpan measurements, then changes are made to some spectrums in order to better couple to field data. Finally, some recommendations are made to improve the wave data acquisition and analysis methods. From the study results, it's important to mention that the Tayfun high probability distribution and the Cavanie period probability distribution better fit Tuxpan field data. In the spectral analysis, the Bretchneider spectrum, modified by Mitsuyasu, better coupled to the spectrum obtained from Tuxpan field data. In the temporal statistical analysis, correct the mean level using the parabolic approximation, in order to eliminate the tidal and long period wave effects, it is recommended. For the registered individual wave calculus the zero up cross method was used. [Spanish] En este trabajo se revisan los criterios para el analisis estadisticos temporal y espectral del oleaje, mismos que son aplicados para la caracterizacion del oleaje en Tuxpan, Veracruz. En cuanto al analisis estadistico temporal, se comparan las distribuciones teoricas de probabilidad de altura de Rayleigh, Tayfun y Carter; y las de periodo de Bretchneider, Cavanie y Longuet-Higgins contra las resultantes de las mediciones en campo. Por otro lado y concerniente al analisis en el dominio de la frecuencia, se comparan los espectros teoricos de Bretchneider- Mitsuyasu, Jonswap-Hasselmann, Pierson

  3. Preliminary Characterization of the Liquid Discharge of the Mexico Hospital; Caracterizacion Preliminar de la Descarga Liquida del Hospital Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Rojas, A

    2001-07-01

    constituye un grave problema a nivel nacional. En este trabajo se realiza una caracterizacion preliminar de la descarga liquida del Hospital Mexico. Para ello se analizaron diferentes puntos de vertido dentro de la institucion, ellos son : Lavanderia, cocina central, Laboratorio Clinico, Rayos X, Laboratorio de Biomasa, Morgue y la descarga final del hospital. Esto con el fin de conocer el manejo de los desechos liquidos en el centro de salud, la calidad sanitaria de estos vertidos y su influencia en las aguas crudas del Hospital Mexico en el cuerpo receptor. Para este estudio primero se coordino con el personal de cada departamento para conocer sobre el manejo y tipo de residuos liquidos que son descargados al sistema de tuberias. Posteriormente se realizaron las pruebas fisico-quimicas y biologicas con base en dos muestreos compuestos realizados los dias 26 de octubre y 4 de noviembre de 1998. Entre las pruebas realizadas se tienen: pH, DBO, DQO, SAAM, Grasas y Aceites, Temperatura, Nitrogeno y Coliformes Fecales, dependiendo de las caracteristicas de su punto de procedencia. Al final del estudio, se evaluaron los resultados obtenidos para cada punto de vertido estudiado y luego se analizo la influencia de estos focos sobre la calidad de las aguas crudas del hospital, las cuales descargan en una quebrada localizada al costado noroeste de las instalaciones. Los resultados obtenidos permiten conocer preliminarmente la caracterizacion de la descarga liquida del Hospital Mexico y lo catalogan como una fuente de contaminacion. El Hospital requiere de una planta de tratamiento biologica para aquellos vertidos biodegradables, y de un sistema de tratamiento quimico para tratar ese tipo de productos, que son utilizados en los procesos propios de cada departamento; ademas se requiere tomar en cuenta medidas de reduccion de contaminacion que disminuyan la cantidad de desechos desde la fuente. (Author)

  4. AISLAMIENTO Y CARACTERIZACION DE UNA LEVADURA FLOCULANTE PARA PRODUCIR ETANOL DEL BANANO DE RECHAZO

    Directory of Open Access Journals (Sweden)

    CARLOS GUEVARA-BRAVO

    Full Text Available Fue aislada y caracterizada una cepa de levadura Saccharomycescerevisiae LEG-06, con características floculantes para fermentar jugo de banano extraído bajo condiciones básicas. Los rendimientos de etanol fueron comparados con levaduras comerciales y además fueron evaluados los efectos del pH y del agente neutralizante. Adicionalmente se evaluó el efecto sobre la eficiencia de 10 fermentaciones sucesivas usando la misma levadura. Finalmente, se escaló la fermentación a 40 L en reactor tubular con agitación mecánica y se determinaron los parámetros cinéticos de la levadura. Las condiciones ideales fueron: pH 5,5 utilizando ácido cítrico como neutralizante, 23,8 g/L de levadura, 14,5°Brix. La eficiencia estuvo entre 82-84% y el pH óptimo de floculación entre 5,5 y 6,0. La concentración de etanol obtenido en las mejores condiciones alcanzó el 7,5%. Estos resultados demuestran la levadura como la metodología usada, presentan las características adecuadas y deseadas para desarrollar un proceso a nivel de planta piloto para la producción de etanol a partir de banano de rechazo.

  5. CARACTERIZACION FISICOQUIMICA DEL MANGO COMUN (Mangifera indica L. DURANTE SU PROCESO DE MADURACION

    Directory of Open Access Journals (Sweden)

    VICTOR QUINTERO C

    Full Text Available El proceso de maduración del mango está gobernado bajo una serie de reacciones bioquímicas al interior del fruto que se caracterizan por cambios en la textura, color, en el contenido de azúcares, ácidos, aromas, entre otros. Las sustancias acumuladas durante el desarrollo se transforman de manera lenta y progresiva hasta que el fruto alcanza las condiciones de aroma y jugosidad que permita clasificarlo como maduro. Se realizó una cinética de maduración durante nueve días, determinando parámetros físicos y químicos como color en pulpa y en cáscara, textura, actividad de agua, sólidos solubles, pH y acidez titulable. Se modeló cinéticamente el comportamiento de cada una estas variables y se pudo determinar que los sólidos solubles tienen una tendencia explicada con un modelo de regresión multiplicativo y la actividad de agua con un modelo de regresión reciproco de X mientras el pH y la acidez con una ecuación de regresión de raíz cuadrada de X, de la misma manera el cambio de color en cáscara y en pulpa presento una regresión reciproca de X. Por último en el caso de la textura se observó y se ajustó modelos lineales tanto para cáscara como para pulpa.

  6. CARACTERIZACION DE RIZOBACTERIAS PROMOTORAS DEL ENRAIZAMIENTO DE ESTACAS DE EUCALYPTUS GLOBULUS LABILL. : MECANISMOS DE ACCION Y FLUCTUACION POBLACIONAL

    OpenAIRE

    DIAZ PERALTA, KATY PAULINA; DIAZ PERALTA, KATY PAULINA

    2009-01-01

    Las plantaciones de Eucalyptus spp en Chile, son altamente valoradas en el mercado mundial, su producción se basa en la propagación vegetativa de plantas en viveros, a través de estacas y miniestacas; sin embargo, ex iste una variabilidad en el potencial del enraizamiento entre clones de especies e híbridos del género, lo cual no permite obtener el total de plantas en los programas de producción clonal. Diversos estudios han demostrado que bacterias rizosféricas denominadas bacterias promotor...

  7. ¿Crisis o transición? Caracterizaciones intelectuales. Del dualismo argentino en la apertura democrática

    Directory of Open Access Journals (Sweden)

    Visacovsky, Sergio E

    2005-06-01

    Full Text Available This article presents an analysis of the conceptual organization of the "democratic transition" model, through which an important sector of social scientists represented the military dictatorship crisis in Argentina in 1982, and interpreted its advent and ending, to guide the society towards its definitive democratization. This model was based on ideas and conceptual structures produced and used in the Argentine society to describe and to interpret the political process. We will explain that the notion of "crisis" was replaced for the democratic transition model; this paradigm was made according to the classic frames of Argentine thinking, and for this reason it was not only an interpretative frame to the inauguration of a new era and the final overcoming of the democratic instability, but also a perspective on political past and the causes of “authoritarianism”.

    Este trabajo presenta un análisis de la organización conceptual del modelo de “transición a la democracia” mediante el cual un amplio sector de científicos sociales conceptualizó la crisis de la última dictadura militar en la Argentina en 1982, e interpretaron su advenimiento y desenlace, para guiar a la sociedad hacia su definitiva democratización. Este modelo estaba sustentado en nociones y estructuras conceptuales producidas y empleadas en la sociedad argentina para describir e interpretar el proceso político. La noción de “crisis” revirtió en una aplicación del modelo de transición a la democracia que, aún cuando se propuso como un marco interpretativo volcado a la inauguración de una nueva era y a la superación definitiva de las interrupciones democráticas, conllevó una perspectiva sobre el pasado político y, en especial, sobre las causas del “autoritarismo”, que se forjó dentro de los moldes clásicos del pensamiento argentino.

  8. Caracterizacion fisiológica del crecimiento y desarrollo del fruto de mango (mangifera indica l. variedad van dyke en el municipio de el Espinal

    Directory of Open Access Journals (Sweden)

    Galvis Jose Antonio

    2002-12-01

    " SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis" />

    El estudio se realizó en la finca Frutol del Municipio de El Espinal, departamento del Tolima, situado a una altura de 431 m.s.n.m., con precipitación, temperatura y Humedad Relativa promedio anual de 1.368 mm / año, 29°C y 70%.

  9. Prototype study of characterization of the impact that produces the diffuser of an industrial discharge into the sea water; Estudio prototipo de caracterizacion del impacto que produce el difusor de una descarga industrial sobre el medio marino

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz Gallarza, S. M.; Gil Zurita, A.; Garcia Hernandez, R.; Vergara Mendez, S.; Garcia Leal, M. L. [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

    2000-09-01

    impact. [Spanish] Para establecer limites maximos permisibles de contaminantes descargados en el mar por vertimientos antropogenicos, las autoridades involucradas en la proteccion y reglamentacion ambiental han fijado caracteristicas particulares de descarga a cada empresa. Ademas de cuidar que no se excedan los niveles establecidos, debe evaluarse el efecto de estas sustancias sobre el medio. En este contexto, se realizan estudios interdisciplinarios integrales de caracterizacion del impacto en el medio marino a causa de las industrias. Una de ellas, la cual vierte al litoral noroeste del golfo de Mexico mediante un difusor submarino, solicito un primer estudio de este genero. En este estudio prototipo se efectuaron estimaciones fisicas, quimicas, biologicas y geologicas en una red de 49 estaciones en seis transectos posicionados a bordo de una embarcacion y con teodolitos desde la costa a cinco niveles (superficie, 4, 8, 12 y 16 m de profundidad) y durante lluvias, secas y nortes. Se determinaron metales pesados en agua, sedimentos, organismos y muestras combinadas de la descarga. Se relacionaron mediciones continuas de corrientes, salinidad y temperatura en las boquillas del difusor a partir de registros de dos corrientimetros S4 InterOcean. Con vuelos en helicopteros se registraron las variaciones de desplazamiento de la pluma de contaminantes en diversas condiciones climaticas. Se adquirieron imagenes del satelite LANDSAT TM para obtener informacion de diferentes regiones del espectro electromagnetico y para corroborar observaciones sobre el comportamiento de la pluma de descarga. Ademas de los metodos convencionales para graficacion y manejo de la informacion, se empleo visualizacion tridimensional, la cual permitio interpretar patrones estacionales y de difusion. Por los excelentes resultados obtenidos con esta metodologia, se presenta a la consideracion de los especialistas este estudio como un prototipo para la determinacion de impacto en ambientes marinos

  10. Characterization of the permutations by block that have reversible one dimensional cellular automata; Caracterizacion de las permutaciones en bloque que representan automatas celulares unidimensionales reversibles

    Energy Technology Data Exchange (ETDEWEB)

    Seck Tuoh Mora, J. C. [Instituto Politecnico Nacional, Mexico, D. F. (Mexico)

    2001-06-01

    We present a review of reversible one dimensional cellular automata and their representation by block permutations. We analyze in detail the behavior of such block permutations to get their characterization. [Spanish] En el siguiente escrito se da una revision a la representacion y comportamiento de automatas celulares unidimensionales reversibles por medio de permutaciones en bloque. Hacemos un analisis detallado del comportamiento de dichas permutaciones para obtener su caracterizacion.

  11. Dynamic friction characterization in a turbine rotor and metallographic analysis of the friction element; Caracterizacion dinamica del rozamiento en rotor de turbina y analisis metalografico del elemento de rozamiento

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez Solis, Jose Antonio; Cristalinas Navarro, Victor Manuel; Mojica Calderon, Cecilio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2007-11-15

    As a part of the diagnosis of the root cause of the blades fault of the of the L-1 wheel of a of low pressure rotor of 300 MW, in one of the Power stations of Electrical Generation, a design was made and an experimental rubbing test of friction in the same rotor was performed but in the adjacent wheel of movable blades L-2. The objectives of the experimental rubbing test were to determine the dynamic characteristics of the rubbing to corroborate what was observed in the diagrams of spectra registered by the power station during the operation of the Unit, to determine the maximum bending stress of the used element to provide rubbing to the wheel of blades L-2 and to infer in a qualitative way the magnitude of the necessary friction force to generate the dynamic characteristics of the rubbing and finally to determine the micro-structural changes that underwent the element employed to apply rubbing. [Spanish] Como parte del diagnostico de la causa raiz de la falla de los alabes de la rueda L-1 de un rotor de baja presion de 300 MW, en una de las Centrales de Generacion Electrica, se diseno y efectuo una prueba experimental de rozamiento en el mismo rotor pero en la rueda adyacente de alabes moviles L-2. Los objetivos de la prueba experimental de rozamiento fueron determinar las caracteristicas dinamicas del rozamiento para corroborar lo observado en los diagramas de espectros registrados por la Central durante la operacion de la Unidad, determinar el esfuerzo maximo a la flexion del elemento utilizado para suministrar rozamiento a la rueda de alabes L-2 e inferir de manera cualitativa la magnitud de la fuerza de rozamiento necesaria para generar las caracteristicas dinamicas del razonamiento y por ultimo determinar los cambios microestructurales que experimento el elemento utilizado para aplicar rozamiento.

  12. Dynamic characterization of the friction in turbine rotor and metallographic analysis of the friction element; Caracterizacion dinamica del rozamiento en rotor de turbina y analisis metalografico del elemento de rozamiento

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez Solis, Jose Antonio; Cristalinas Navarro, Victor Manuel; Mojica Calderon, Cecilio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2010-07-01

    As a part of the diagnosis of the root cause of the fault of the blades of the L-1 wheel of a of low pressure rotor of 200 MW, in one of the power stations of electrical generation, an experimental test of friction in the same rotor was designed and carried out, but in the adjacent wheel of movable blades L-2. The objectives of the friction experimental test were to determine the dynamic characteristics of the friction, to corroborate what it was observed in the spectra diagrams registered by the power station during the operation of the unit, to determine the maximum bending stress of the used element to provide friction to the wheel of L-2 blades and to infer, in a qualitative way, the magnitude of the force of friction necessary to generate the dynamic characteristics of the friction and finally to determine the micro-structural changes that underwent the used element to apply friction. [Spanish] Como parte del diagnostico de la causa raiz de la falla de los alabes de la rueda L-1 de un rotor de baja presion de 200 MW, en una de las centrales de generacion electrica, se diseno y efectuo una prueba experimental de rozamiento en el mismo rotor, pero en la rueda adyacente de alabes moviles L-2. Los objetivos de la prueba experimental de rozamiento fueron determinar las caracteristicas dinamicas del razonamiento, para corroborar lo observado en los diagramas de espectros registrados por la central durante la operacion de la unidad, determinar el esfuerzo maximo a la flexion del elemento utilizado para suministrar rozamiento a la rueda de alabes L-2 e inferir, de manera cualitativa, la magnitud de la fuerza de rozamiento necesaria para generar las caracteristicas dinamicas del rozamiento y por ultimo determinar los cambios microestructurales que experimento el elemento utilizado para aplicar rozamiento.

  13. Caracterizacion Del Agua Mediante El Control De Calidad En El Laboratorio De Analisis Fisico, Quimico Y Microbiologico Y Su Incidencia En La Calidad De Vida De La Población Urbana

    OpenAIRE

    Mazacon Mora, Maite

    2014-01-01

    Esta investigación aborda el estudio del trabajo de laboratorio de Análisis de Agua Potable del Gobierno Autónomo Descentralizado Municipal del cantón Baba ante la necesidad de disponer de información de partida para la valoración del tipo de trabajo que se realiza, sus falencias y fortalezas y de ese modo establecer mecanismos de mejoramiento. Luego que se realizó el diseño teórico y metodológico de la investigación se hizo el levantamiento de información a partir del trabajo de campo c...

  14. Characterization of Hospital Residuals; Caracterizacion de Residuos Hospitalarios

    Energy Technology Data Exchange (ETDEWEB)

    Blanco Meza, A; Bonilla Jimenez, S

    1997-07-01

    The main objective of this investigation is the characterization of the solid residuals. A description of the handling of the liquid and gassy waste generated in hospitals is also given, identifying the source where they originate. To achieve the proposed objective the work was divided in three stages: The first one was the planning and the coordination with each hospital center, in this way, to determine the schedule of gathering of the waste can be possible. In the second stage a fieldwork was made; it consisted in gathering the quantitative and qualitative information of the general state of the handling of residuals. In the third and last stage, the information previously obtained was organized to express the results as the production rate per day by bed, generation of solid residuals for sampled services, type of solid residuals and density of the same ones. With the obtained results, approaches are settled down to either determine design parameters for final disposition whether for incineration, trituration, sanitary filler or recycling of some materials, and storage politics of the solid residuals that allow to determine the gathering frequency. The study concludes that it is necessary to improve the conditions of the residuals handling in some aspects, to provide the cleaning personnel of the equipment for gathering disposition and of security, minimum to carry out this work efficiently, and to maintain a control of all the dangerous waste, like sharp or polluted materials. In this way, an appreciable reduction is guaranteed in the impact on the atmosphere. (Author) [Spanish] El objetivo principal de esta investigacion es la caracterizacion de los residuos solidos. Se da tambien una descripcion del manejo de los desechos liquidos y gaseosos generados en hospitales, identificando la fuente donde se originan. Para lograr el objetivo propuesto se dividio el trabajo en tres etapas; la primera fue el planeamiento y la coordinacion con cada centro hospitalario

  15. "Floating signifiers": Negotiating the meaning of national in Montenegro, at the Internet chat room Café del Montenegro

    Directory of Open Access Journals (Sweden)

    Čarna Brković

    2016-03-01

    Full Text Available The paper represents the analysis of the narratives that deal with the sentiment of national belonging in Montenegro within the chat room Café del Montenegro. The practice of the Internet chat room users is perceived as cultural engagement – „practicing" the State and the emotion of national identification of its own kind. By writing, arguing, negotiating the meaning of the state and nation an abundance of different and broken knowledge’s are created- many histories, geographies, ethics and politics are offered. On the one hand, these directly undermines, jeopardizes and questions the power of the State narrative, hitherto negotiating the nation, the State, authentic devotion, simultaneously manufacturing the state-nation as a reality. The result of mutual correspondence in the chat room is persistent negotiation of the meaning of national categories in Montenegro over the years.

  16. Pumping systems characterization; Caracterizacion de los sistemas de bombeo

    Energy Technology Data Exchange (ETDEWEB)

    Torres Gutierrez, R. [Eficiencia Energetica, S.A. de C.V., Mexico, D. F. (Mexico)

    1995-12-31

    In this paper the characterization of the pumping systems is discussed, and an explanation is given of the need of evaluating in detail the possibility of implementing the frequency variators as an option for energy conservation, explaining how the simple use of the similarity or affinity laws lead to over-estimate the saving. [Espanol] En este articulo se describe la caracterizacion de los sistemas de bombeo y se explica la necesidad de evaluar en detalle la posibilidad de implementacion de variadores de frecuencia, como una alternativa para el ahorro de energia, explicando como el simple uso de las leyes de semejanza o afinidad llevan a sobre-evaluar los ahorros.

  17. Pumping systems characterization; Caracterizacion de los sistemas de bombeo

    Energy Technology Data Exchange (ETDEWEB)

    Torres Gutierrez, R [Eficiencia Energetica, S.A. de C.V., Mexico, D. F. (Mexico)

    1996-12-31

    In this paper the characterization of the pumping systems is discussed, and an explanation is given of the need of evaluating in detail the possibility of implementing the frequency variators as an option for energy conservation, explaining how the simple use of the similarity or affinity laws lead to over-estimate the saving. [Espanol] En este articulo se describe la caracterizacion de los sistemas de bombeo y se explica la necesidad de evaluar en detalle la posibilidad de implementacion de variadores de frecuencia, como una alternativa para el ahorro de energia, explicando como el simple uso de las leyes de semejanza o afinidad llevan a sobre-evaluar los ahorros.

  18. Design, construction and characterization of a rural solar furnace; Diseno, construccion y caracterizacion de un horno solar rural

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Luna, Gabriela

    2001-06-15

    centigrade, followed of the condition using 6 liters of oil, in which a maximum temperature of 115 centigrade was obtained and in the tests with 6 liters of water as load a maximum temperature of 95 centigrade was registered. In these tests the temperature of the oil surpasses 60 centigrade during an approximate period of 7 hours and is higher than 80 centigrade by a lapse of 5 hours. The water temperature is higher than 60 centigrade for a period of more than 5 hours and during 3 hours is higher than 80 centigrade. These results are satisfactory, because they assure the accomplishment of the process of baking inside the furnace. A calculation program was elaborated to implement the theoretical model of the concentration. This program reads the data of radiation intensity in the horizontal plane supplied by the weather station of the CIE and determines the incident radiation in the furnace collector. The theoretical model of the thermal behavior was implemented in another computer program; this program reads the data of the incident radiation in the collector of the furnace and the data of room temperature and calculates the temperature of the furnace as a time function. The model overestimates the temperature reached in the furnace, nevertheless reproduces qualitatively the thermal behavior of the same. In spite of the limitations of the theoretical model, this can be of utility in achieving the reproduction of the temperature of the load experimentally registered, through an effective coefficient of heat losses and an effective coefficient of heat capacity, characteristic of each one of the conditions of the test. [Spanish] Esta tesis presenta el diseno, construccion y caracterizacion de un horno solar tipo caja para su uso en comunidades rurales en la zona intertropical. El trabajo presentado en esta tesis parte del diseno opto-geometrico de un horno solar tipo caja propuesto por un entusiasta grupo de jovenes estudiantes (Acosta et al., 1996, Vazquez et al., 1998

  19. Huerta del Rey: Edafic Characterization of a Historic Area of the Mercury Mining and Study of the Transfer of Mercury from the Soil to Plantago Major; Huerta del Rey: Caracterizacion Edafica de una Zona Historica de la Mineria del Mercurio y Estudio de la Transferencia del Mercurio a Plantago Major

    Energy Technology Data Exchange (ETDEWEB)

    Suarez, C; Manero, L; Sierra, M J; Rodriguez-Alonso, M; Millan, R

    2013-02-01

    The main objective of this scientific-technical report is to carry out a characterization of study plot called Huerta del Rey in the mercury (Hg) mining district of Almaden. For this goal, an edaphic characterization has been performed and the Hg behavior in the soil study has been evaluated. Then, total Hg concentration and easily available Hg for plants have been determined and the absorption and distribution of Hg in Plantago major L (typical specie from the study area) have been studied. The results showed that the total Hg concentrations in the soil ranged from 530 {+-} 32 mg kg{sup -}1 to 4300 {+-} 339 mg kg{sup -}1 even to 12378 {+-} 1051mg kg{sup -}1. It is in accordance with the normal values measured in a Hg mining area. Otherwise, the percentage of soluble Hg in soil with respect to the total Hg concentration is low (< 0.3 %) although if concentration instead of percentage is taking into account, the soluble Hg reached values up to 1.33 {+-}0.14 mg kg{sup -}1 that could mean a potential risk of pollution of groundwater by leaching process. Finally a brief description about different technologies for decreasing Hg concentration in the study soil, including phytoremediation, has been performed. (Author) 96 refs.

  20. The New Room Arrangement as a Teaching Strategy = La Nueva Organizacion del Salon como Estrategia Educativa.

    Science.gov (United States)

    Dodge, Diane Trister

    Many typical classroom behavior problems--running in the classroom, inability to make choices, failure to stick with activities, fighting over toys, and poor use of materials-- can be traced to how the room is arranged and how materials are displayed. By making a few changes in the classroom environment, early childhood teachers can create a…

  1. Evaluation of the shielding of a room for radiodiagnostic; Evaluacion del blindaje de una sala para radiodiagnostico

    Energy Technology Data Exchange (ETDEWEB)

    Padilla R, Z. P. [Servicios de Salud de Zacatecas, Hospital de Especialidades en Salud Mental, Prolongacion 5 de mayo 1702-Sur, Parque Industrial, 98500 Calera de Victor Rosales, Zacatecas (Mexico); Acuna D, E.; Escareno J, E.; Vega C, H. R. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Calle Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

    2011-10-15

    The X-ray discovery by Roentgen in 1895 and its application in diagnosis was a breakthrough in medicine. Worldwide, X-ray technique is one of the most widely used procedures in medical diagnosis. At the Mental Health Hospital of Calera Zacatecas a room has been designed as radiology room, however there is not a record of shielding characteristics. In order to determine the features of X-ray equipment that the room can host, in this work a series of calculations were carried out. Calculations were based upon the NCRP 151 recommendations and fulfilling the requirements given in the Mexican standard NOM-229-SSA1-2002. From the actual room conditions this can host a X-ray equipment without fluoroscopy, with a workload of 80 ma-min/week, with 125 k Vp as maximum operating voltage. From the actual conditions a set of recommendations, for better protection of radiation workers and public are also given. (Author)

  2. Caracterizacion dosimetrica del equipo de Terapia Superficial Therapax del Hospital Mexico

    International Nuclear Information System (INIS)

    Bernui De Vivanco, Maria Giselle; Rojas Rivas, Jorge; Cardenas Retuerto, Augusto

    2007-01-01

    The Servicio de Radioterapia of the Hospital Mexico in San Jose, Costa Rica has a Superficial Therapy equipment Therapax model DXT 300. It describes the measurements for the dosimetric characterization of the configurations 100 kVp, 25 mA and filter of 2.4 mm of Al, and 250 kVp, 10 mA and filter of 2.5 mm of Cu, taking into account that the uncertainties in the measurements of the superficial therapy equipment are higher than in the rank of the megavoltage [es

  3. Impacto social de las salas de rehabilitación en el Municipio de Pinar del Río Social impact of rehabilitation rooms in Pinar del Rio municipality

    Directory of Open Access Journals (Sweden)

    Yazuina Fuentes de la Rosa

    2012-10-01

    Full Text Available Introducción: la rehabilitación tiene el objetivo de contribuir a la recuperación y reinserción a la sociedad de personas con discapacidades físico-motoras. Objetivo: determinar el impacto social de las salas de rehabilitación en el municipio Pinar del Río durante el período 2009-2011. Material y método: se realizó una investigación observacional, descriptiva, transversal, y aplicada. Para el procesamiento y análisis estadístico univariado y bivariado se diseñó una base de datos en el programa Access® y se utilizó el paquete estadístico SPSS 14.0®. Resultados: el número de casos atendidos se ha incrementado paulatinamente por años de servicios hasta un total de 44408 (100%, sobresaliendo por áreas el Policlínico «Hermanos Cruz» (34%. La enfermedad rehabilitada y el tratamiento indicado más frecuentes fueron la artropatía (47.7% y la kinesioterapia (28,9% respectivamente. El 73,5 % inició el tratamiento físico-rehabilitador antes de los 3 días y el 94 % tuvo menos de 45 minutos de estadía promedio de espera. La estadía promedio de tratamiento en la sala fue de 15 a 21 días (46 %. La calidad percibida por el usuario y su resolutividad fueron superiores en el 90 % de los casos. La tasa de reinserción de los pacientes en la vida laboral fue de un 66.7 %. El costo unitario descendió inicialmente a 1.13 para luego aumentar a 1.30. El grado de satisfacción de los pacientes fue de un 94 %. Conclusiones: se logró el impacto social deseado de las salas de rehabilitación del municipio de Pinar del Río sobre la calidad de la atención a estos pacientes.Introduction: rehabilitation is aimed at providing the recovery and reinsertion of people suffering from physical-motor disabilities. Objective: to determine the social impact of the rehabilitation rooms in Pinar del Rio municipality during 2009-2011. Material and Method: an observational, descriptive, cross sectional and applied research was conducted. To process the

  4. Caracterizacion morfológica de 24 accesiones de uchuva del banco de germoplasma de la Universidad Nacional de Colombia Sede Palmira Morphologic characterization of 24 accessions of Cape gooseberry from the National University at Palmira's  campus  germplasm bank

    Directory of Open Access Journals (Sweden)

    Martha Liliana Bonilla Betancourt

    2008-06-01

    Full Text Available Se caracterizaron 24 accesiones de uchuva Physalis peruviana L. de la colección de trabajo de la Universidad Nacional de Colombia sede Palmira, mediante 27 descriptores morfológicos (10 cualitativos y 17 cuantitativos. Se analizó la correspondencia múltiple (ACM y clasificación jerárquica ascendente para variables cualitativas y de componentes principales (ACP para variables cuantitativas. en el ACM tres ejes explicaron el 65.64% de la variabilidad; el primero con 38.53% reunió las variables color de máculas, color de anteras, color de la baya madura y color de semilla y la clasificación jerárquica generó tres grupos. Los dos primeros ejes del ACP explicaron 32.04% y 17.02% de la variación. el mayor aporte a la variabilidad fue dado por peso del fruto, tamaño transversal y longitudinal del fruto, peso de semilla húmeda y seca, número de semillas y contenido de sólidos solubles. La clasificación jerárquica determinó la conformación de cinco grupos. Se identificaron 5 materiales con potencialidades para el procesamiento, mercado y programas de mejoramiento por poseer alto peso del fruto, bajo número de semillas y valor alto de grados Brix.24 accessions of Cape gooseberry Physalis peruviana L. from the National University of Colombia at Palmira's campus work collection were characterized using 27 morphologic descriptors (10 qualitative and 17 quantitative. Two different analyses were made, the multiple correspondence analyses (MCA and the ascendant hierarchy classification for qualitative variables and the principal component analysis (PCA for quantitative variables. The results showed that 65.64% of variability was explained with three axes in the MCA. The first axe with 38.53% contained the variables colour of petals, anthers, berry ripped and seeds. The hierarchy classification generated three groups. The two first axes in ACP analysis explained 32.04% and 17.02% of the variation. In addition , the highest variability was

  5. Hypoxia Room

    Data.gov (United States)

    Federal Laboratory Consortium — The Hypoxia Room is a 8x8x8 ft. clear vinyl plastic and aluminum frame construction enclosure located within USAREIM laboratory 028. The Hypoxia Room (manufactured...

  6. Nanoparticulas basadas en complejos de Fe(II) con transicion de espin: sintesis, caracterizacion y aplicaciones en electronica molecular

    Science.gov (United States)

    Monrabal Capilla, Maria

    Esta tesis doctoral esta organizada en 5 capitulos y esta destinada al estudio de sistemas de Fe (II) que presentan el fenomeno de la transicion de espin a escala nanometrica. El capitulo 1 contiene una introduccion general sobre materiales moleculares multifuncionales, destacando aquellos ejemplos mas importantes. Por otro lado, se explicara el fenomeno de la transicion de espin, tratando aspectos conceptuales, los antecedentes mas importantes y la situacion actual. En el capitulo 2 se describen los diferentes procesos existentes para la obtencion de diferentes tipos de nanoparticulas. Ademas, se presenta la sintesis y caracterizacion de nanoparticulas del polimero de coordinacion unidimensional [Fe(Htrz)2(trz)]BF4, obtenidas mediante el metodo de micelas inversas. Estas nanoparticulas, con una estrecha distribucion de tamanos centrada alrededor de los 11 nm, presentan una transicion de espin muy abrupta, con un ancho ciclo de histeresis termica de unos 40K. En el capitulo 3 se describe el proceso de modificacion del tamano de las nanoparticulas descritas en el capitulo anterior, llevado a cabo variando la proporcion de surfactante/H2O en el medio. Ademas, con el objetivo de modificar las propiedades magneticas de las nanoparticulas obtenidas en el capitulo 2, se lleva a cabo la sintesis de nanoparticulas de polimeros de la misma familia del [Fe(Htrz)2(trz)]BF4. En concreto se sintetizaron 3 nuevos tipos de nanoparticulas basadas en el polimero [Fe(Htrz)1-x(NH2trz)x](ClO4)2, siendo x = 0.05, 0.15 y 0.3, en cada caso. Estas nanoparticulas siguen presentando una estrecha distribucion de tamanos y una transicion de espin muy abrupta y con un ancho ciclo de histeresis. Ademas, se observa que este ciclo se desplaza a temperaturas mas proximas a la temperatura ambiente a medida que se aumenta el porcentaje de 4-amino-1, 2, 4- triazol en la muestra. Pero al mismo tiempo se produce una disminucion de la anchura de este ciclo. Por ultimo, en este capitulo se presenta la

  7. Geotechnical characterization through in situ and laboratory tests of several geological formations present in the route of the Future Fix Connection between Spain and Morocco through Gibraltar Strait; Caracterizacion geotecnica mediante ensayos in situ y de laboratorio de algunas formaciones geologicas presentes en la traza de la Futura Conexion Fija entre Espana y Marruecos a traves del estrecho de Gibraltar

    Energy Technology Data Exchange (ETDEWEB)

    Perucho Martinez, A.; Diez Torres, J. A.; Muniz Menendez, M.; Cano Linares, H.; Ruiz Fonticiella, J. M.

    2015-07-01

    CEDEX and SECEGSA (Sociedad Española para la Comunicación Fija a través del Estrecho de Gibraltar), Have been collaborating since a few decades ago to study different technical aspects related to the Fix Connection through the Gibraltar Strait, mainly in relation to the geological and geotechnical properties of the different formations present in the route. In order to do so, many studies of geotechnical characterization of materials, in situ and laboratory testing campaigns have been carried out. Furthermore, they have participated in some Expertise Committees carrying out some advice work related to studies performed by other organizations. This paper presents a brief description of the most relevant aspects of the main geological and geotechnical studies performed related to this Project of the Future Fix Connection and obtained through the study of SECEGSAs extensive data base. Moreover, it includes a synopsis of the geotechnical characterization carried out through in situ and laboratory tests on different Miocene and Eocene formations from the Algeciras Unit, present in the route of the future Fix Connection between Spain and gibraltar through the Gibraltar Strait. (Author)

  8. Marco para el análisis del tema ecológico en la literatura venezolana

    OpenAIRE

    María De los Ángeles Martín Hernández

    2016-01-01

    El propósito del artículo es sistematizar las premisas teóricas que constituyen la base fundamental para el abordaje analítico de los textos literarios con tema ecológico. Se conjugan y sintetizan los planteamientos hallados en la revisión bibliográfica realizada, relacionados con definiciones y caracterizaciones de la vinculación actividad literaria-tema ecológico en el contexto venezolano; se organizan consideraciones que explican la adopción del adjetivo “ecológico” y las vinculaciones eco...

  9. Room Acoustics

    Science.gov (United States)

    Kuttruff, Heinrich; Mommertz, Eckard

    The traditional task of room acoustics is to create or formulate conditions which ensure the best possible propagation of sound in a room from a sound source to a listener. Thus, objects of room acoustics are in particular assembly halls of all kinds, such as auditoria and lecture halls, conference rooms, theaters, concert halls or churches. Already at this point, it has to be pointed out that these conditions essentially depend on the question if speech or music should be transmitted; in the first case, the criterion for transmission quality is good speech intelligibility, in the other case, however, the success of room-acoustical efforts depends on other factors that cannot be quantified that easily, not least it also depends on the hearing habits of the listeners. In any case, absolutely "good acoustics" of a room do not exist.

  10. Recovery Room

    African Journals Online (AJOL)

    defined postoperative unit or on the hospital ward. Patients were frequently transferred from the operating room directly to the ward where they were placed close to the nursing station. In 1947 the. Anesthesia Study Commission of the Philadelphia.

  11. Background characterization in a liquid scintillation spectrometer; Caracterizacion del fondo de un espectrometro de centelleo liquido

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Barquero, L.; Los Arcos, J.M.; Jimenez de Mingo, A.

    1995-07-01

    An alternate procedure for background count rate estimation in a liquid scintillation spectrometer is presented, which does not require to measure a blank with similar composition, volume and quench, to the problem sample. The procedure is based on a double linear parameterization which was obtained from a systematic study of the background observed with glass vials, in three different windows, 0 - 20 KeV, 0 - 800 KeV and 0 - 2 MeV, for volume between 2 and 20 mi of three commercial scintillators, Hisafe II, Ultima-Gold and Instagel, and quenching degree in the interval equivalent to 50% - 3% tritium efficiency. This procedure was tested with standard samples of 3H, and led to average discrepancies less than 10% for activity {>=}0,6 Bq, against conventional methods for which the discrepancies are twice on average. (Author) 10 refs.

  12. Synthesis and characterization of porous calcium phosphate; Sintesis y caracterizacion del fosfato de calcio poroso

    Energy Technology Data Exchange (ETDEWEB)

    Granados C, F.; Serrano G, J.; Bonifacio M, J. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)]. e-mail: fgc@nuclear.inin.mx

    2007-07-01

    The porous calcium phosphate was prepared by the continuous precipitation method using Ca(NO{sub 3}){sub 2}.4H{sub 2}O and NH{sub 4}H{sub 2}PO{sub 4} salts. The synthesized material was structurally and superficially characterized using the XRD, BET, IR TGA and SEM techniques. The obtained inorganic material was identified as calcium phosphate that presents a great specific area for what can be efficiently used as adsorbent material for adsorption studies in the radioactive wastes treatment present in aqueous solution. (Author)

  13. La representación del alumno violento en el discurso mediático

    Directory of Open Access Journals (Sweden)

    Virginia Saez

    2016-12-01

    Full Text Available El presente trabajo se focaliza en los discursos mediáticos del fenómeno de las violencias en las escuelas en Argentina. Dadas las características del objeto de indagación, el abordaje metodológico fue cualitativo y la información se analizó en el marco del análisis socioeducativo del discurso. Entre los resultados obtenidos, observamos que en las formas de designar al alumno violento se destacan dos dimensiones para caracterizar a los jóvenes: la dimensión emotiva y la dimensión estética. Por su originalidad, este estudio constituye un antecedente para futuras indagaciones sobre las caracterizaciones de los jóvenes vinculados con la violencia en el espacio escolar

  14. Creators Room

    DEFF Research Database (Denmark)

    Iversholt, Lene; Iversholt Toft, Karina

    2012-01-01

    Creators Room er et koncept til daginsitutioner, der indrammer og giver bud på en forståelse mellem inkluderende pædagogik og fysiske rammer. Konceptet er udviklet i et tværfagligt procesforløb, hvor formålet har været at skabe stadig bedre indendørsmiljøer for børn ved at forene pædagogiske...

  15. New heuristics for planning operating rooms.

    NARCIS (Netherlands)

    Molina-Pariente, J.M.; Hans, Elias W.; Framinan, J.M.; Gomez-Cia, T.

    2015-01-01

    We tackle the operating room planning problem of the Plastic Surgery and Major Burns Specialty of the University Hospital “Virgen del Rocio” in Seville (Spain). The decision problem is to assign an intervention date and an operating room to a set of surgeries on the waiting list, minimizing access

  16. Synthesis and characterization of PdAg as a catalyst for oxygen reduction reaction in acid medium; Sintesis y caracterizacion de PdAg como catalizador para la reaccion de reduccion de oxigeno en medio acido

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Casillas, D. C.; Vazquez-Huerta, G.; Solorza-Feria, O. [Centro de Investigacion y de Estudios Avanzados del IPN, Mexico D.F. (Mexico)]. E-mail: dcmartinez@cinvestav.mx

    2009-09-15

    This work presents the synthesis of the binary compound PdAg and the electrochemical characterization for oxygen reduction reaction (ORR) in acid medium. The catalyst is obtained from the reduction of Pd(NO{sub 3}){sub 2}·2H{sub 2}O and AgNO{sub 3} with NaBH{sub 4} in THF. The synthesized compound was physically characterized with transmission electron microscopy (TEM), sweep electron microscopy (SEM) and x-ray diffraction (XRD) of powder. Electrochemical studies were conducted to determine the catalytic activity and intrinsic properties of the PdAg material for the ORR in acid medium using cyclic voltamperometry (CV), rotary disc electrode (RDE) and electrochemical impedance spectroscopy (EIS) in a solution of H{sub 2}SO{sub 4} 0.5 M at 25 degrees Celsius. The electrochemical current-potential responses were compared to those of palladium and platinum. The kinetic results showed an increase in the performance of the bimetallic electrocatalyst containing Ag as compared to pure Pd, but less than that obtained with nanometric Pt. The Tafel slopes obtained are roughly120 mV dec-1, similar to that reported for Pt and Pd and for other Ru-based electrocatalysts. [Spanish] En este trabajo se presentan la sintesis del compuesto binario PdAg y su caracterizacion electroquimica para la reaccion de reduccion de oxigeno (RRO) en medio acido. El catalizador se obtuvo a partir de la reduccion de Pd(NO{sub 3}){sub 2}·2H{sub 2}O y AgNO{sub 3} con NaBH{sub 4} en THF. El compuesto sintetizado se caracterizo fisicamente por microscopia electronica de transmision (MET), microscopia electronica de barrido (MEB) y difraccion de rayos X (DRX) de polvos. Se realizaron estudios electroquimicos para determinar la actividad catalitica y las propiedades intrinsecas del material de PdAg para la reaccion de reduccion de oxigeno (RRO) en medio acido, utilizando las tecnicas de voltamperometria ciclica (VC), electrodo disco rotatorio (EDR) y espectroscopia de impedancia electroquimica (EIE), en

  17. Prevalencia del consumo de drogas en pacientes atendidos en urgencias de adultos Drug consumption prevalence in adult patients attending the emergency room

    Directory of Open Access Journals (Sweden)

    Sofía Piñero-De Fuentes

    1998-05-01

    Full Text Available Objetivo. Conocer la asociación entre consumo de marihuana, cocaína y/o bazuco, y causas de ingreso de pacientes al Hospital Central de Valencia, Venezuela. Material y métodos. Se estudiaron 148 individuos recibidos en el área de urgencias, debido a lesiones por agresión (LA, accidentes de tránsito (AT, accidentes de trabajo (ATB, lesión autoinfringida (LAU e intoxicaciones (INT. Se aplicó un cuestionario y un análisis toxicológicos. Resultados. Se encontró un consumo de drogas, solas y/o asociadas, de 23.6% (13.5% cocaína, 7.4% marihuana y 2.7% ambas. De los pacientes positivos para cocaína, 50% ingresaron por LA; 20% por INT; 10% por LAU; 5% por ATB, y 15% por otras causas. De los positivos para marihuana, 36.4% ingresaron por AT; 27.3% por ATB; 18% por LA; 9.09% por INT, y 9.09% por otros motivos. Los ingresos por LA fueron de 75%, y por ATB, de 25%, para drogas en combinación. El consumo alcohólico asociado a cocaína fue de 50%; a marihuana, de 9%; a combinación, de 25%. Conclusiones. Estos hallazgos demuestran que uno de cada cuatro ingresos por causa traumática está asociado al abuso de drogas, solas o en combinación, lo que revela una estrecha relación causa-efecto.Objective. To determine the association between patient admission due to trauma and the consumption of marihuana, cocaine and bazooka (basic cocaine paste at the Central Hospital of Valencia, Venezuela. Material and methods. 148 subjects were studied who had entered the emergency room due to lesions caused by aggression (AL, traffic accidents (TA, work-related accidents (WRA, self-inflicted injury (SII and intoxication (INT. A questionnaire was applied and toxicology analyses performed. Results. Drug consumption, alone or in combination, was found in 23.6% of individuals (13.5% cocaine, 7.4% marihuana and 2.7% both. Of the cocaine positive, 50% entered for AL, 20% for INT, 10% for SII, 5% for WRA and 15% for other causes. Of the marihuana positive, 36

  18. Improving operating room safety

    Directory of Open Access Journals (Sweden)

    Garrett Jill

    2009-11-01

    Full Text Available Abstract Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety.

  19. Sentidos del trabajo y organización de la vida doméstica   entre policías de la Provincia de Buenos Aires  

    Directory of Open Access Journals (Sweden)

    Sabrina Calandrón

    2015-07-01

    Full Text Available Este artículo analiza las caracterizaciones de la actividad policial como trabajo, describiendo las percepciones de los miembros de una fuerza de seguridad puntual: la Policía de la Provincia de Buenos Aires. A lo largo del texto se analiza el sitio de la actividad policial en la trayectoria laboral de los y las policías. Esto permite identificar las características relevantes del empleo como la estabilidad económica, la seguridad social que otorga y las proyecciones a futuro. No obstante, también se estudia la convivencia de dinámicas apoyadas en el sistema burocrático policial con otras que personalizan los lazos laborales. Finalmente, las concepciones de la familia y la lógica de responsabilidades morales hacia ella obtienen un lugar central en el desarrollo y sentido del trabajo en la policía.

  20. Glass characterization to assess the airborne sound isolation; Caracterizacion de vidrios para la evaluacion del aislamiento acustico a ruido aereo

    Energy Technology Data Exchange (ETDEWEB)

    Alba Fernandez, J.; Rey Tormos, R. del; Ramis Soriano, J.; Berto Carbo, L.

    2012-11-01

    The main contribution of this paper is the formulation of an alternative to experimental determination of loss factor and, consequently, to improve the predictions of airborne sound insulation for any type of monolithic or laminated glass. In addition, a review of the standards related to measurement of mechanical parameters of glass is carried out, with particular interest in laminated glass Indeed, one of the problems that arise in the current context of building acoustics is to meet the requirements of facades airborne sound insulation of existing Building Technical Code (BTC). It is known that the blind and the hollow part of the facade should be distinguished. The weakest part regarding to airborne sound insulation is the empty one (consisting of glass, woodwork and other elements). Choosing an adequate woodwork makes the glass surface become the limiting factor. The Constructive Elements Catalog (CEC) of the BTC, the UNE-EN 12758:2011 standard, as well as some, increasingly, data vendors provide information about airborne sound insulation for monolithic glass, laminated glass and double glazing. In the case of laminated glass, these data are limited only to those with a single intermediate layer, and also nonacoustic. Can therefore be said that there is a gap of knowledge in this regard. To obtain reliable predictions of airborne sound insulation of multilayer partitions, such as laminated glass, mechanical characteristics must be known, being loss factor one of the most important. (Author) 7 refs.

  1. Clinic-surgical characterization of the colorectal cancer in inpatients;Caracterizacion clinico quirurgica del cancer colorrectal en pacientes ingresados

    Energy Technology Data Exchange (ETDEWEB)

    Alejo Concepcion, Osvaldo; Castillo Lamas, Libardo; Umpierrez Garcia, Ibis [Hospital Militar Docente ' Dr Mario Munnoz Monroy' , Matanzas (Cuba)

    2009-07-01

    The colorectal cancer presents high incidence. This pathology occupies the fifth place among the neoplasias in both sexes in Cuba. With the objective of characterizing this disease we carried out a descriptive transversal study at the service of General Surgery of the University Military Hospital of Matanzas 'Dr. Mario Munnoz Monroy', in the period from January 2001 to January 2005, studying age, sex, familiar oncological antecedents, presentation form, localization and diagnosis of the tumor, and also the surgical technique used in the treatment. The results showed predominance of the male sex in ages between 60 and 69 years old, different symptoms depending on the localization, predominance of the rectal cancer, and others. It was concluded that there is a delay between the beginning of the symptoms and the diagnosis, considerably diminishing the healing possibilities and survival

  2. Characterization of the Novillo Tokamak in main discharge regime; Caracterizacion del Tokamak Novillo en regimen de descarga principal

    Energy Technology Data Exchange (ETDEWEB)

    Lopez C, R.; Melendez L, L.; Chavez A, E.; Colunga S, S.; Valencia A, R.; Gaytan G, E

    1992-07-15

    The analytical procedure to carry out the establishment of the discharge in a Tokamak including: a) Ionization, b) Diffusion losses, recombination, union, drift speed, spurious fields, and c) Electric field is presented. In an experimental way a procedure settles down by means of which it is characterized the plasma, specially a new characteristic discharge parameter is settled down and it is the plasma current by the duration of the (I{sub p}t) discharge. (Author)

  3. Synthesis by plasma and characterization of compounds derived from polyacetylene; Sintesis por plasma y caracterizacion de compuestos derivados del poliacetileno

    Energy Technology Data Exchange (ETDEWEB)

    Vasquez O, M

    2004-07-01

    This work presents a study on, the synthesis by plasma and the characterization of an aliphatic conjugated polymer, polyacetylene-chlorinated (Pac), and two aromatic polymers, Poly pyrrole (P Py-Cl) and Poly thiophene (Pth-Cl) synthesized with chlorine and the electrical conductivity. The last two polymers were synthesized to compare the chlorine-polymer interaction in aliphatic and aromatic polymers synthesized by plasma and their repercussion on the electrical transport of charges in the material. The structure and morphology of the polymers were studied using scanning electron microscopy (Sem), energy dispersive spectroscopy (EDS), infrared spectroscopy (Ft-IR), conductivity analysis and X-Ray photon spectroscopy (XPS). The results showed that Pac is soluble in acetone and other organic solvents, which indicates a low proportion of crosslinking in the polymers. This point is important because the crosslinking reduces the electrical conductivity in the material. The Pac conductivity is in the range of 1 x 10{sup -12} to 6 x 10{sup -4} S/cm in the internal of 35- 90% of relative humidity. A possible mechanism for the transport of electrical charges in Pac is by means of the double and simple conjugated bonds in the polymers. Pth-Cl and P Py-Cl present electric conductivity in the interval of 9 x 10{sup -5} to 1 x 10{sup -2} S/cm and show a great dependence on the relative humidity. The chlorine addition in these polymers was through simultaneous polymerization with chloroform. This last compound can decompose if the energy of the plasma is relatively high, and the fragments can link to the polymer in a hybrid process of copolymerization. An important point of this work is that the polymer is soluble, a difference of the obtained via plasma as the poli aniline, P Py-CI and Pth-Cl both studied in this work. If took in account that the Pac is single the monomer and that P Py-Cl and Pth-CI is affected by the chlorine that modifies the conductivity of the material, then Pac presents an electrical conductivity greater that P Py-Cl and Pth-Cl. (Author)

  4. Hydrogeological characterization of the Nador Plio-Quaternary aquifer, Tipaza (Algeria); Caracterizacion hidrogeologica del acuifero pliocuaternario de Nador, Tipaza (Argelia)

    Energy Technology Data Exchange (ETDEWEB)

    Bouderbala, A.; Remini, B.; Pulido-Bosch, A.

    2014-06-01

    This paper focuses on the hydrogeological and hydrochemical knowledge of the Nador Plio-Quaternary aquifer in Tipaza, situated along the Algerian coastline. It includes the identification of the hydrodynamic aquifer, hydrogeological and piezometric characteristics and, finally, an overview of the hydro-geochemistry of the area. We carried out this study between 2008 and 2013, with piezometric and hydrochemical monitoring of 24 wells in the study area. The physicochemical analysis of water shows that 25 % of the wells in the coastal zone have values of electrical conductivity greater than 3000 μS/cm The Mg{sup 2}+/Ca{sup 2}+ ratio is also higher than one and there are sodium chloride facies due to the mix of freshwater with seawater exceeding 10 % in some places. However, the comparison of the salinity of the groundwater during the period 2008-2013 with 1988-2004 indicates that there is a low dilution due to the reduction of pumping in the aquifer after the construction of the Boukourdane dam. There has also been a more rainy period and a possible return flow from irrigation in the area. (Author)

  5. Room temperature superconductors

    International Nuclear Information System (INIS)

    Sleight, A.W.

    1995-01-01

    If the Holy Grail of room temperature superconductivity could be achieved, the impact on could be enormous. However, a useful room temperature superconductor for most applications must possess a T c somewhat above room temperature and must be capable of sustaining superconductivity in the presence of magnetic fields while carrying a significant current load. The authors will return to the subject of just what characteristics one might seek for a compound to be a room temperature superconductor. 30 refs., 3 figs., 1 tab

  6. Synthesis and characterization of cobalt oxide and titanium mixtures using mechanical alloying and its response to oxygen reduction; Sintesis y caracterizacion de mezclas de oxidos de cobalto y titanio por aleado mecanico y su respuesta para la reduccion de oxigeno

    Energy Technology Data Exchange (ETDEWEB)

    Basurto S, R.; Bonifacio-Martinez, J.; Fernandez, S.M [Instituto Nacional de Investigaciones Nucleares, Ocoyoacac, Estado de Mexico (Mexico)]. E-mail: rafael.basurto@inin.gob.mx

    2009-09-15

    The synthesis of Co{sub 3}O{sub 4} and CoTiO{sub 3} oxides was conducted using mechanical alloying and combustion. Co{sub 3}O{sub 4} used was obtained using a SPEX ball mill with cobalt nitrate, Co(NO{sub 3})36H{sub 2}O plus urea, CH{sub 4}N{sub 2}O, in a molar ratio of 1:1 and a ball weight ratio of 1:4 with grinding times of 2.5 hours in an argon atmosphere. The material obtained after alloying underwent combustion at 400 degrees Celsius and 500 degrees Celsius, obtaining oxides of mixed cobalt valence. This material was mixed with TiO{sub 2} with a weight ratio of 1:1 and was mechanically alloyed with a ball weight ratio of 1:8; grinding was performed for 2.5 hours in argon atmosphere and it underwent combustion at 800 degrees Celsius. Characterization was performed using x-ray diffraction, low-vacuum sweep electron microscopy and EDS. The electrochemical performance was obtained in a galvanostat-potentiostat (Princenton Applied Research modelo 273). Both materials present electrocatalytic activity for oxygen reduction reaction in alkaline medium. [Spanish] La sintesis de los oxidos: Co{sub 3}O{sub 4} y CoTiO3 se realizo por la tecnica de aleado mecanico y combustion. El Co{sub 3}O{sub 4} utilizado, se obtuvo por con un molino de bolas SPEX, utilizando nitrato de cobalto, Co(NO{sub 3})36H{sub 2}O mas urea, CH{sub 4}N{sub 2}O, en una relacion molar 1:1.y una relacion en peso de bolas de 1:4 con tiempos de molienda de 2.5 horas, en atmosfera de argon, al termino del aleado el material obtenido se llevo a combustion a 400 grados centigrados y 500 grados centigrados, obteniendose el oxido de valencia mixta de cobalto. Este material se mezclo con TiO{sub 2}, en una relacion en peso de 1:1 y se aleo mecanicamente, con una relacion en peso de bolas de 1:8, por 2.5 horas de molienda en atmosfera de argon y llevandolo a combustion a 800 grados centigrados. La caracterizacion se hizo por: Difraccion de Rayos X, Microscopia Electronica de Barrido de Bajo Vacio y EDS El

  7. Representações de puérperas sobre o sistema alojamento conjunto: do abandono ao acolhimento Representación de las puérperas acerca del alojamiento conjunto: del abandono al acogimiento Mothers' representation concerning the rooming-in: from the abandonment to the acceptance

    Directory of Open Access Journals (Sweden)

    Alda Valéria Neves Soares

    2003-06-01

    Full Text Available O objetivo desse estudo foi compreender a representação social das puérperas acerca do Alojamento Conjunto (AC. Participaram 23 puérperas internadas no AC do HU-USP. A análise dos dados, obtidos por entrevistas individuais e grupos focais, baseou-se nas Representação Sociais. Uma das representações sobre sua internação mostra sentimento de medo, submissão às rotinas institucionais e equipe de saúde, um misto de acomodação e resistência a maneira impessoal como são tratadas. A Hospitalização: do abandono ao acolhimento, indica como a disponibilidade de interagir dos profissionais atua como elemento de re-significação das representações de abandono e indiferença sobre o atendimento à mulher.El objetivo de este estudio fue el de comprender la representación social de las puérperas acerca del Alojamiento Conjunto (AC. Participaron 23 puérperas internadas en el AC del Hospital Universitario de la USP. El análisis de los datos, obtenidos por entrevistas individuales y grupos focales, fue realizada en base a los presupuestos de las Representaciones Sociales. Una de las representaciones de las mujeres sobre su internación hospitalar muestra el sentimiento de miedo, sumisión a las rutinas institucionales y al equipo de salud, una combinación entre acomodo y resistencia de manera muchas veces impersonal de la como son tratadas. La Hospitalización: del abandono al acogimiento, indica también, como la disponibilidad de algunos profesionales, en interactuar efectivamente con esas mujeres, actúa como elemento de re-significación de las representaciones de abandono e indiferencia que éstas cargam consigo, sobre la atención a la mujer.The Objective of this study was understand the mothers' social representation concerning the rooming-in. Population: 23 mothers assisted in the University Hospital of São Paulo University. Data analysis was obtained by individual and group interviews, based on the Social Representation

  8. CSN's New Emergency Room

    International Nuclear Information System (INIS)

    Sendin, P.

    2005-01-01

    During the month of July 2005 the physical renovation works and technological updating of the basic infrastructures of the CSN Emergency Room (SALEM) were finished, allowing the Room to now have greater functionality and a broader technical capacity. Nevertheless, the technological improvement process of SALEM will reach its full potential within the next few years, once the installation currently underway of the new information integration and monitoring systems and the decision making support systems have been completed. This article describes the improvements introduced to the Room and the objectives pursued in this renovation project to convert the SALEM into a new generation room in accordance with its current technological context. (Author) 4 refs

  9. The need of alkalinity determination in the characterization of rain; Necesidad de la determinacion de la alcalinidad en la caracterizacion de la lluvia

    Energy Technology Data Exchange (ETDEWEB)

    Pal Verma, Mahendra [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-01-01

    In this paper is presented the alkalinity determination of the carbonic species in the rain waters by the Gran titration method. The alkalinity values obtained by this method in low electric conductivity waters are fairly reliable. Also, the existing studies on the characterization of acid rains, are discussed. [Espanol] En este trabajo se presenta la medicion de la alcalinidad y la determinacion de las especies carbonicas en las aguas de lluvia por el metodo de la titulacion de Gran. Los valores de alcalinidad obtenidos por este metodo en las aguas de baja conductividad electrica son bastante confiables. Asimismo, se discuten los estudios existentes sobre la caracterizacion de la lluvia acida en la republica mexicana.

  10. Determinacion del error sistematico del momentum de muones producidos por interacciones neutrino-nucleon en el detector MINER$\

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Bautista, Gonzalo A. [Pontifical Catholic Univ. of Peru, Lima (Peru)

    2015-11-29

    El Modelo Estandar describe todas las partculas observadas en el naturaleza hasta el momento as como las caractersticas que gobiernan a las interacciones fundamentales entre ellas. En especial es posible identicar a las interacciones electromagnetica y debil, las cuales bajo determinadas condiciones de temperatura y energa pueden ser descritas a traves de una sola teora que engloba a ambas. A esta teora se le denomina electrodebil y tiene como nalidad caracterizar las propiedades de la interaccion maniesta a partir de la mezcla de las interacciones electromagnetica y debil, la que tambien lleva como nombre interaccion electrodebil. Particularmente, los neutrinos son de especial interes ya que, por un lado, interactuan por medio de la interaccion debil muy raramente en comparacion con otras partculas y, por el otro, no son acertadamente descritos por el Modelo Estandar. Por medio de observaciones experimentales que demostraban que los neutrinos cambian de sabor al propagarse, fenomeno llamado oscilaciones de neutrinos, se pudo llegar a la conclusion de que la implicancia de este fenomeno da como consecuencia que los neutrinos efectivamente s tienen masa, algo que entra en contradiccion con la descripcion inicial del Modelo Estandar, el cual los describe como partculas sin masa. Es de esta manera que las oscilaciones de neutrinos han sido y siguen siendo en la actualidad objeto de interes en la Fsica de Altas Energas tanto teorica como experimental. A n de poder realizar mediciones precisas de oscilaciones de neutrinos, los experimentos encargados de estas mediciones deben tratar de reducir sus incertidumbres en lo posible. Una de estas proviene de la caracterizacion de las secciones de choque de los neutrinos cuando interactuan con la materia, particularmente los nucleones al interior de los nucleos atomicos. El experimento MINERA esta orientado, entre otras cosas, a hacer una correcta caracterizacion de secciones de choque neutrino-nucleon por medio del estudio de

  11. CARACTERIZACION DE UN MINERAL DE COBRE EN ARGENTINA PARA LA PRODUCCION DE MATTE.

    Directory of Open Access Journals (Sweden)

    VANESA BAZÁN

    2011-01-01

    Full Text Available Argentina, posee minerales cuyas reservas la potencian para constituirse en un fuerte abastecedor regional. Actualmente, se han realizado proyectos de exploraciones y explotación de minerales de cobre que poseen una ley entre 0,5% y 0,8% generalmente libre de impurezas como Sb, As, Pb, Bi y Hg. [1, 2, 3, 4] Este hecho indicaría que puede existir un gran potencial para el desarrollo de la pirometalurgia del cobre, dado que hasta el momento no existen avances en este sentido. En este trabajo se presentan resultados de un estudio realizado sobre un mineral de baja ley de Cu, en el cual se identifi can sus fases mediante microscopía óptica, ensayos de fl otación contemplando diferentes condiciones, con el objetivo de obtener concentrados de distintas calidades. Finalmente, para comprender aspectos del proceso de obtención del cobre se realiza una simulación del proceso de fusión en el horno fl ash basado en balances de masa y energía.

  12. Concepção dos enfermeiros sobre o conteúdo do website sala de recuperação pós-anestésica Concepciones de los enfermeros acerca del contenido del sitio web sala de recuperación post-anestésica Conceptions of nurses about the content of the website post-anesthetic recovery room

    Directory of Open Access Journals (Sweden)

    Thaís Honório Lins

    2010-02-01

    Full Text Available O presente artigo tem por objetivo identificar a concepção de enfermeiros acerca do conteúdo de website sobre sala de recuperação pósanestésica (SRPA. Pesquisa de campo, descritiva, realizada durante o 8º Congresso Brasileiro de Enfermagem em Centro Cirúrgico, Recuperação Anestésica e Centro de Material e Esterilização com docentes de enfermagem e enfermeiros. 95,65% dos enfermeiros consideraram importante um website com disponibilização de informações sobre SRPA e apresentou uma grande diversidade entre os assuntos que devem fazer parte do conteúdo do website, porém todos os aspectos devem ser abordados desde que sejam informações seguras e confiáveis. É importante saber a opinião e expecta tivas de enfermeiros relacionadas a um website que disponibilize informações sobre SRPA.El presente artículo pretende identificar el diseño de las enfermeras sobre el contenido del sitio web en la sala de recuperación postanestésica. Búsqueda de campo, descriptivo, celebrada durante el 8º Congreso Brasileño de Enfermería en la Sala de Operaciones, Anestesia y Centro de Recuperación de Materiales y Esterilización con los maestros, enfermeras y enfermería. El 95,65% de las enfermeras consideran importantes con un sitio web para proporcionar información SRPA y presentó una gran diversidad entre las cuestiones que deben que deben formar parte de los contenidos del sitio web, sino a todos los aspectos deben abordarse si son seguros y de la información fiable. Es importante escuchar la opinión de las enfermeras y expectivas en relación con un sitio web que proporciona información sobre SRPA.The present article has as its objective to identify the concept of the registered nurses in relation to the contents in a website about the post-anesthetic recovery room. The descriptive field research was done during the 8th Brazilian Nursing Congress in Surgical Nursing, Anesthetic Recovery and the Central Supply, Sterilization and

  13. Virtual Seminar Room

    DEFF Research Database (Denmark)

    Forchhammer, Søren Otto; Fosgerau, Anders; Hansen, Peter Søren Kirk

    1999-01-01

    The initial design considerations and research goals for an ATM network based virtual seminar room with 5 sites are presented.......The initial design considerations and research goals for an ATM network based virtual seminar room with 5 sites are presented....

  14. Operating room manager game

    NARCIS (Netherlands)

    Hans, Elias W.; Nieberg, T.

    2007-01-01

    The operating room (OR) department of a hospital forms the heart of the organization, where the single largest cost is incurred. This document presents and reports on the “Operating Room Manager Game,” developed to give insight into managing a large hospital's OR department at various levels of

  15. VALORIZACIÓN DE RESIDUOS AGROINDUSTRIALES DEL TEQUILA PARA ALIMENTACION DE RUMIANTES

    Directory of Open Access Journals (Sweden)

    Clementina R. Ramírez-Cortina

    2012-01-01

    Full Text Available El objetivo de este trabajo fue investigar una tecnología adecuada para el uso del bagazo de Agave tequilana W. var. azul en raciones alimenticias para rumiantes. Las características físicas y químicas del bagazo fueron evaluadas. De acuerdo con dichas caracterizaciones, éste puede ser utilizado como complemento en la alimentación de rumiantes. Sin embargo, un inconveniente es la baja digestibilidad del bagazo, debido a su alto contenido de lignina; para disminuirlo se usó un tratamiento con hidróxido de calcio. El tratamiento químico se realizó en un reactor de vidrio (50 L con las siguientes condiciones: concentraciones de Ca(OH2 de 2, 5 y 10 %, humedad del bagazo de 20 y 80 %, temperaturas de 30 y 50 °C. Las pruebas de digestibilidad se realizaron en el bagazo tratado químicamente. La digestibilidad aumentó de 36 % (bagazo no tratado a 54.5 % con el mejor tratamiento (humedad 80 %, Ca(OH2 10 %, y 50 °C. Con base en los resultados de digestibilidad, se puede concluir que el bagazo tratado con Ca(OH2 puede ser utilizado como suplemento en la composición de las raciones alimenticias de los rumiantes.

  16. CARACTERIZACION MOLECULAR DE LOS HAPIOGRUPOS DE DNA MITOCONDRIAL EN LA ENFERMEDAD CELIACA

    OpenAIRE

    PARADA DAZA, ALEJANDRA CRISTINA

    2010-01-01

    La enfermedad celiaca (EC), es un desorden autoinmune intestinal crónico con un fuerte componente genético, asociado a genes HLA-002 o HLA-008. La prevalencia en Europa de la EC se estima en el 1%, sin embargo en América del Sur no hay una estimación de la prevalencia de EC y no se conoce si la étina se relaciona con la baja frecuencia de la enfermedad o simplemente es el reflejo del subdiagóstico en la zona. El análisis de la presencia de genes nativos se puede realizar a través de la búsque...

  17. Estimación del riesgo de sobrecalentamiento y del potencial de refrigeración por ventilación natural de viviendas unifamiliares en ciudades costeras de Chile.

    Directory of Open Access Journals (Sweden)

    Massimo Palme

    2016-12-01

    Full Text Available Este trabajo presenta una propuesta de evaluación de la demanda de refrigeración y de la capacidad de refrigeración pasiva por ventilación natural en viviendas sociales. La propuesta se fundamenta en la EN ISO 13790:2008 que utiliza una metodología casi estacionaria de cálculo. Se evalúa una vivienda con ventanas de doble batiente en las dos fachadas, en las diferentes orientaciones N-S, E-O, NO-SE y NE-SO. Se suponen dos posibles caracterizaciones del interior: poco conectado y muy conectado. Los emplazamientos considerados presentan una variedad climática importante, desde los desiertos del norte hasta los climas con variabilidad estacional más marcada del centro- sur del País. Las ciudades consideradas en el estudio son: Arica, Iquique, Antofagasta, La Serena, Valparaíso, Concepción, Valdivia y Puerto Montt. Los resultados muestran la presencia de demanda de refrigeración en la mayoría de los emplazamientos analizados y una capacidad de evacuar el calor por ventilación natural media variable entre el 20% y el 80% de esta demanda, demostrando la importancia de la utilización de las brisas para la refrigeración de edificio y ciudades del País. 

  18. The Virtual Dressing Room

    DEFF Research Database (Denmark)

    Holte, Michael Boelstoft; Gao, Yi; Petersson, Eva

    2015-01-01

    This paper presents the design and evaluation of a usability and user experience test of a virtual dressing room. First, we motivate and introduce our recent developed prototype of a virtual dressing room. Next, we present the research and test design grounded in related usability and user...... experience studies. We give a description of the experimental setup and the execution of the designed usability and user experience test. To this end, we report interesting results and discuss the results with respect to user-centered design and development of a virtual dressing room....

  19. Films and dark room

    International Nuclear Information System (INIS)

    Abdul Nassir Ibrahim; Azali Muhammad; Ab. Razak Hamzah; Abd. Aziz Mohamed; Mohamad Pauzi Ismail

    2008-01-01

    After we know where the radiographic come from, then we must know about the film and also dark room. So, this chapter 5 discusses the two main components for radiography work that is film and dark room, places to process the film. Film are structured with three structured that are basic structured, emulsion and protection structured. So, this film can be classified either with their speed, screen and standard that used. The process to wash the film must be done in dark room otherwise the radiographer cannot get what are they inspected. The processing of film will be discussed briefly in next chapter.

  20. Room Acoustical Fields

    CERN Document Server

    Mechel, Fridolin

    2013-01-01

    This book presents the theory of room acoustical fields and revises the Mirror Source Methods for practical computational use, emphasizing the wave character of acoustical fields.  The presented higher methods include the concepts of “Mirror Point Sources” and “Corner sources which allow for an excellent approximation of complex room geometries and even equipped rooms. In contrast to classical description, this book extends the theory of sound fields describing them by their complex sound pressure and the particle velocity. This approach enables accurate descriptions of interference and absorption phenomena.

  1. Our Urban Living Room

    DEFF Research Database (Denmark)

    Hjortshøj, Rasmus

    2016-01-01

    Our Urban Living Room is an exhibition and a book, created by Cobe. The theme is based on Cobe’s ten years of practice, grounded in social livability and urban democracy, and our aim to create buildings and spaces that invite Copenhageners to use and define them; as an extended living room, where...... the boundaries between private and public space become fluid. Based on specific Cobe projects, Our Urban Living Room tells stories about the architectural development of Copenhagen, while exploring the progression of the Danish Capital - from an industrial city into an urban living room, known as one...... of the world’s most livable places. Photography by Rasmus Hjortshøj....

  2. CARACTERIZACION MORFOMETRICA DE LA GERMINACION DE CHLORAEA CRISPA LINDL. (ORCHIDACEAE) USANDO UN ANALISIS DE IMAGEN

    OpenAIRE

    Verdugo, Gabriela; Marchant, Jorge; Cisternas, Mauricio; Calderón, Ximena; Peñaloza, Patricia

    2007-01-01

    Mediante la técnica de análisis de imagen se evaluó las etapas de germinación de un lote de semillas de Chloraea crispa Lindl. Se pudo observar las cuatro etapas de germinación propuestas por Mitchell. La etapa cero corresponde a semillas sin germinar, éstas son alargadas, curvadas en uno de sus extremos, y alcanzan un largo promedio de 0,5 mm. En la etapa uno se aprecia un incremento sólo en ancho debido al crecimiento del embrión, en la etapa dos hay cambios tanto en la forma como en el aum...

  3. METODOLOGIA DE CARACTERIZACION CONCEPTUAL POR CONDICIONAMIENTOS SUCESIVOS. UNA APLICACION A SISTEMAS MEDIOAMBIENTALES.

    OpenAIRE

    PEREZ BONILLA, ALEJANDRA

    2009-01-01

    En clasificación automática se buscan perfiles subyacentes a la estructura de un dominio que ayude a comprenderlo y permita una mejor toma de decisiones. Por ello comprender el significado de las clases resulta fundamental. Por otro lado la validación de un cluster sigue siendo un problema abie~to por no haberse encontrado aún un criterio objetivo para determinar la calidad de un conjunto de clases en el contexto del clusteríng (Hand 1996), que se aplica en situaciones en las que no hay un bu...

  4. Update of the Picker C9 irradiator control system of the gamma II room of the secondary laboratory of dosimetric calibration; Actualizacion del sistema de control del irradiador Picker C9 de la sala gamma II del laboratorio secundario de calibracion dosimetrica

    Energy Technology Data Exchange (ETDEWEB)

    Simon S, L. E.

    2016-07-01

    The Picker C9 irradiator is responsible for the calibration of different radiological equipment and the control system that maintains it in operation is designed in the graphical programming software LabVIEW (Laboratory Virtual Instrumentation Engineering Workbench), being its major advantages: the different types of communication, easy interconnection with other software and the recognition of different hardware devices, among others. Operation of the irradiator control system is performed with the NI-Usb-6008 (DAQ) data acquisition module of the National Instruments Company. The purpose of this work is to update the routines that make the Picker C9 control system of the gamma II room of the secondary laboratory of dosimetric calibration, using the graphic programming software LabVIEW, as well as to configure the new acquisition hardware of data that is implemented to control the Picker C9 irradiator system and ensure its operation. (Author)

  5. Test Room Stability Plan

    International Nuclear Information System (INIS)

    1993-01-01

    This plan documents the combination of designs, installations, programs, and activities that ensures that the underground excavations at the Waste Isolation Pilot Plant (WIPP), in which transuranic (TRU) waste may be emplaced during the Test Phase, will remain sufficiently stable and safe during that time. The current ground support systems installed at the WIPP are the result of over ten years of data collection from hundreds of geomechanical instruments and thousands of hours of direct observation of the changing conditions of the openings. In addition, some of the world's most respected experts on salt rock mechanics have provided input in the design process and concurrence on the suitability of the final design. The general mine rockbolt pattern and the ground support system for the test rooms are designed to specifically address the fracture and deformation geometries observed today at the WIPP. After an introductory chapter, this plan describes the general underground design, then proceeds to an account of general ground support performance, and finally focuses on the details of the special test room ground support systems. One such system already installed in Room 1, Panel 1, is described in comprehensive detail. Other test rooms in Panel 1, whether full-size or smaller, will be equipped with systems that ensure stability to the same or equivalent extent. They will benefit from the experience gained in the first test room, which in turn benefitted from the data and knowledge accumulated during previous stages (e.g., the Site and Preliminary Design Validation program) of the project

  6. Tecnicas avanzadas de medida en intensimetria acustica para la caracterizacion de materiales aislantes

    Science.gov (United States)

    Munuera Saura, Gregorio

    The measurement rate of acoustic reduction (R) in an insulating material is determined in special designed enclosures according to UNE EN ISO 140-1 standard. The construction of a testing room that complies with the standards requires a significant financial investment, that too often can not be provided by general machinery manufacturers. The outdoor machines have to be designed considering the noise emission limits established in the European Directive 2000/14, making the installment of insulating materials in enclosures of machines necessary. Suppliers of insulating materials for industrial use does not normally provide the insulating properties of their products, which are often obtained from rock wool, polyethylene, polyurethane, synthetic rubber, etc. It is difficult to test these materials that are characterized by low density surface in a room standardized test procedure that is based on the measurement of sound pressure. The main problem is getting the validation of the measurement when the rate of acoustic reduction is relatively low, as in the case of materials mentioned above. An alternative procedure is proposed in this Doctoral Thesis based on the measurement of sound intensity. The vector nature of this parameter allows just the flow of energy through a given surface to be measured. The validation of the measurement is achieved with the highest degree of accuracy by applying the criteria included in the standard UNE EN ISO 9614. A steel plate 6 mm thick incorporated with a sound source for amplification of a pink noise signal is designed for carrying out the tests. Faced with the source is placed a piece of material to test. The source is connected and the transmitted sound intensity is measured with a probe consisting of two microphones located opposite one another. Previously it has been determined the flow of acoustic energy that impinges on the piece. The difference between the two measures provides directly the rate of acoustic reduction. The

  7. ¿También un arte ‘macro-levantino’? El arquero de grandes dimensiones de Val del Charco del Agua Amarga (Alcañiz, Teruel

    Directory of Open Access Journals (Sweden)

    Bea, Manuel

    2013-06-01

    Full Text Available The digital image analysis carried out in the rock art shelter of Val del Charco (Alcañiz, Teruel, has allowed us to identify an extraordinary large depiction of an archer. This motive can be considered as a real exception because of its large dimensions (130 cm high estimated, in addition to its classification into the so-called Centelles stylistic horizon. The motive is located in the central-upper part of the decorated panel, something that highlights its dominant position, emphasizing the visibility of the figure in the surroundings. The singular aspect of this representation could also point out the aggregation character of the rock art shelter, already underlined in other studies. Therefore, this motive appears as a unique case in the Levantine rock art panorama. In any case, all these particulars do not invalid the distinctive definitions of the Centelles stylistic horizon, appearing as a complement to them.El análisis mediante tratamiento digital de la imagen de una serie de restos pictóricos en el abrigo de Val del Charco nos permite identificar la figura de un gran arquero levantino. Son excepcionales sus extraordinarias dimensiones (130 cm de altura estimada, así como su clasificación dentro del denominado Horizonte Centelles. Su ubicación central y elevada en el abrigo subraya su posición dominante acentuando la visibilidad del motivo también desde el entorno inmediato. El carácter singular de esta representación podría igualmente abundar en la consideración del abrigo como un centro de agregación. La definición de este motivo aparece como un caso único en el panorama del arte levantino que complementa las caracterizaciones aportadas para el horizonte estilístico Centelles sin invalidarlas en modo alguno.

  8. Control room design

    International Nuclear Information System (INIS)

    Zinke, H.

    1980-01-01

    To control a 1300 megawatt nuclear power plant, about 15000 plant parameters must be collected together to control and operate the plant. The control room design therefore is of particular importance. The main design criteria are: Required functions of the power plant process - Level of Automation - Ergonomics - Available Technology. Extensive analysis has resulted in a control room design method. This ensures that an objective solution will be reached. Resulting from this methodical approach are: 1. Scope, position and appearance of the instrumentation. 2. Scope, position and appearance of the operator controls. Process analysis dictates what instrumentation and operator controls are needed. The priority and importance of the control and instrumentation (this we define as the utilisation areas), dictates the rough layout of the control room. (orig./RW)

  9. Room for caring

    DEFF Research Database (Denmark)

    Timmermann, Connie; Uhrenfeldt, Lisbeth; Birkelund, Regner

    2015-01-01

    Aim This study explores how seriously ill hospitalized patients' experience and assign meaning to their patient room. Background Modern hospitals and the rational underlying care and treatment of today have their emphasis on diagnosis, cure and treatment. Consequently, aesthetics in the patient...... rooms such as a view of nature or natural light entering the room are often neglected in caring for these patients. Method A phenomenological-hermeneutic study design was applied and data was collected through multiple qualitative interviews combined with observations at a teaching hospital in Denmark......-being, relief and hope for the patients during serious illness. Therefore, these sensory impressions should be thought of as holding palliative potential and should be included as a part of caring for the seriously ill patients....

  10. The Virtual Dressing Room

    DEFF Research Database (Denmark)

    Holte, Michael Boelstoft

    2013-01-01

    This paper presents a review of recent developments and future perspectives, addressing the problem of creating a virtual dressing room. First, we review the current state-of-the-art of exiting solutions and discuss their applicability and limitations. We categorize the exiting solutions into three...... kinds: (1) virtual real-time 2D image/video techniques, where the consumer gets to superimpose the clothes on their real-time video to visualize themselves wearing the clothes. (2) 2D and 3D mannequins, where a web-application uses the body measurements provided by the customer, to superimpose...... and their demands to a virtual dressing room....

  11. Birth room images

    DEFF Research Database (Denmark)

    Bowden, Calida; Sheehan, Athena; Foureur, Maralyn Jean

    2016-01-01

    Objective: this study examined images of birth rooms in developed countries to analyse the messages and visual discourse being communicated through images. Design: a small qualitative study using Kress and van Leeuwen's (2006) social semiotic theoretical framework for image analysis, a form...... and implications for practice: as images on the Internet inform and persuade society about stereotypical behaviours, the trends of our time and sociocultural norms, it is important to recognise images of the technological birth room on the Internet may be influential in dictating women's attitudes, choices...

  12. The changing sensory room

    DEFF Research Database (Denmark)

    2018-01-01

    In 2017 the kindergarten The Milky Way in the city Vejle in Denmark made a sensory room that has the special ability change whenever wanted by the children and social educators. Kjetil Sandvik (to the right) from Copenhagen University and Klaus Thestrup from Aarhus University reflects upon what...... they saw, took part in and talked with the social educators about. Jacob Knudsen from VIFIN filmed the two gentlemen and organised the project. it is a room composed around common experiments, many self-made objects, open narrative structures. and a combination of digital and analogue elements....

  13. Characterization of the Plasma Edge for Technique of Atomic Helium Beam in the CIEMAT Fusion Device; Caracterizacion del Borde del Plasma del Dispositivo de Fusion TJ-II del CIEMAT mediante el Diagnostico del Haz Supersonico de Helio

    Energy Technology Data Exchange (ETDEWEB)

    Hidalgo, A.

    2003-07-01

    In this report, the measurement of Electron Temperature and Density in the Boundary Plasma of TJ-II with a Supersonic Helium Beam Diagnostic and work devoted to the upgrading of this technique are described. Also, simulations of Laser Induced Fluorescence (LIF) studies of level populations of electronically excited He atoms are shown. This last technique is now being installed in the CIEMAT fusion device. (Author ) 36 refs.

  14. PS Control Room

    CERN Multimedia

    CERN PhotoLab

    1963-01-01

    The good old PS Control Room, all manual. For each parameter, a knob or a button to control it; for each, a light or meter or oscilloscope to monitor it; carefully written pages serve as the data bank; phones and intercom for communication. D.Dekkers is at the microphone, M.Valvini sits in front.

  15. Room for iodo therapy

    International Nuclear Information System (INIS)

    Pinto, A.L.A.; Derivi, A.; Bacelar, A.; Ramos, F.R.; Dias, T.M.; Baptista, I.S.

    1996-01-01

    A description of rules to assemble, to install and to maintain a room for iodo therapy is presented. The necessities of the patients and procedures to meet the norms of radiologic protection established by the Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil) are highlighted

  16. Local control room

    CERN Multimedia

    CERN PhotoLab

    1972-01-01

    Local control room in the ejection building : all electronics pertaining to proton distribution and concomitants such as beam gymnastics and diagnostics at high energies will eventually be gathered here. Shown is the first of two rows of fast ejection electronic racks. It includes only what is necessary for operation.

  17. DSS / Press Room

    Science.gov (United States)

    Defense Security Service, U.S. Department of Defense Site Map | A-Z Index | Facebook | Twitter Locations Press Room Organizational Structure Careers at DSS Doing Business with DSS Frequently Asked Classification System (NCCS) National Industrial Security System (NISS) ODAA Business Management System (OBMS

  18. Controlling the clean room atmosphere

    International Nuclear Information System (INIS)

    Meeks, R.F.

    1979-01-01

    Several types of clean rooms are commonly in use. They include the conventional clean room, the horizontal laminar flow clean room, the vertical laminar flow clean room and a fourth type that incorporates ideas from the previous types and is known as a clean air bench or hood. These clean rooms are briefly described. The origin of contamination and methods for controlling the contamination are discussed

  19. Occupational dosimetry in real time hemodynamic rooms. utility of the system Dose-aware as a training tool; Dosimetria ocupacional en tiempo real en salas de hemodinamica. Utilidad del Sistema Dose-Aware como herramienta formativa

    Energy Technology Data Exchange (ETDEWEB)

    Pinto Monedero, M.; Rodriguez Cobo, C.; Pifarre Martinez, X.; Ruiz Martin, J.; Barros Candelero, J. M.; Goicolea Ruigomez, J.; Diaz Blaires, G.; Garcia Lunar

    2014-02-01

    This paper presents the results from a study in a real time dosimetry system used in the catheter laboratory room of our center. The objective was to know the occupational doses per procedure, on the one hand, and, on the other hand, to evaluate its utility as a learning tool for radiation protection purposes with the simultaneous video recording of the interventions. 83 diagnostic and therapeutic procedures were analyzed, and an average dose per procedure of 0,37 {mu}Sv and 0,10 {mu}Sv for the main cardiologist and nurse were obtained, respectively. 36 of these interventions were also recorded and the images were synchronized with the dosimetric information stored and the dosimetry system. The findings were presented to the interventional cardiology team in a learning session. They showed a high level of satisfaction with this new method of optimizing the occupational doses through a customized learning session. (Author)

  20. Clean room actuators

    Energy Technology Data Exchange (ETDEWEB)

    Higuchi, Toshiro

    1987-06-01

    This report explains on the present status of the clean room actuators including the author's research results. In a clean room, there exists a possibility of dust generation, even when a direct human work is eliminated by the use of robots or automatic machines, from the machines themselves. For this, it is important to develop such clean robots and transfer/positioning mechanism that do not generate dusts, and to develop an actuator and its control technique. Topics described in the report are as follows: 1. Prevention of dust diffusion by means of sealing. 2. Elimination of mechanical contact (Linear induction motor and pneumatic float, linear motor and magnetic attraction float, linear motor and air bearing, and magnetic bearing). 3. Contactless actuator having a positioning mechanism (Use of linear step motor and rotary contactless actuator). (15 figs, 11 refs)

  1. Parametric Room Acoustic Workflows

    DEFF Research Database (Denmark)

    Parigi, Dario; Svidt, Kjeld; Molin, Erik

    2017-01-01

    The paper investigates and assesses different room acoustics software and the opportunities they offer to engage in parametric acoustics workflow and to influence architectural designs. The first step consists in the testing and benchmarking of different tools on the basis of accuracy, speed...... and interoperability with Grasshopper 3d. The focus will be placed to the benchmarking of three different acoustic analysis tools based on raytracing. To compare the accuracy and speed of the acoustic evaluation across different tools, a homogeneous set of acoustic parameters is chosen. The room acoustics parameters...... included in the set are reverberation time (EDT, RT30), clarity (C50), loudness (G), and definition (D50). Scenarios are discussed for determining at different design stages the most suitable acoustic tool. Those scenarios are characterized, by the use of less accurate but fast evaluation tools to be used...

  2. Caracterización poblacional vista desde la perspectiva del desarrollo humano y el enfoque diferencial

    Directory of Open Access Journals (Sweden)

    Nancy Eliana Gallo Restrepo

    2014-01-01

    Full Text Available Este artículo desarrolla a profundidad, de forma amplia y rigurosa, las bases teóricas y metodológicas que fundamentaron el marco conceptual, las categorías de análisis y las estratégicas de recolección de información del proyecto de investigación “Condiciones de vida de la población negra, afrocolombiana, palenquera y raizal en Medellín. Caracterización socio-demográfica, desarrollo humano y derechos humanos 2010”, concluido en el 2011, financiado por convenio interadministrativo de asociación entre la Secretaría de Cultura Ciudadana de la Alcaldía de Medellín y la Corporación Convivamos. Véase en referencias Gallo Restrepo y Sandoval (2011. Las caracterizaciones de poblaciones tienen por objetivo evidenciar realidades sociales, políticas y culturales. Permiten obtener conocimientos fiables del estado actual de las condiciones de vida de una sociedad, o una comunidad en particular, en temas amplios y a su vez conexos.

  3. Caracterización poblacional vista desde la perspectiva del desarrollo humano y el enfoque diferencial

    Directory of Open Access Journals (Sweden)

    Nancy Eliana Gallo Restrepo

    2017-04-01

    Full Text Available Este artículo desarrolla a profundidad, de forma amplia y rigurosa, las bases teóricas y metodológicas que fundamentaron el marco conceptual, las categorías de análisis y las estratégicas de recolección de información del proyecto de investigación “Condiciones de vida de la población negra, afrocolombiana, palenquera y raizal en Medellín. Caracterización socio-demográfica, desarrollo humano y derechos humanos 2010”, concluido en el 2011, financiado por convenio interadministrativo de asociación entre la Secretaría de Cultura Ciudadana de la Alcaldía de Medellín y la Corporación Convivamos. Véase en referencias Gallo Restrepo y Sandoval (2011. Las caracterizaciones de poblaciones tienen por objetivo evidenciar realidades sociales, políticas y culturales. Permiten obtener conocimientos fiables del estado actual de las condiciones de vida de una sociedad, o una comunidad en particular, en temas amplios y a su vez conexos.

  4. Air Distribution in Rooms

    DEFF Research Database (Denmark)

    Nielsen, Peter V.

    The research on air distribution in rooms is often done as full-size investigations, scale-model investigations or by Computational Fluid Dynamics (CFD). New activities have taken place within all three areas and this paper draws comparisons between the different methods. The outcome of the l......EA sponsored research "Air Flow Pattern within Buildings" is used for comparisons in some parts of the paper because various types of experiments and many countries are involved....

  5. Caracterizacion de materiales magnetoelasticos y su aplicacion al control de vibraciones

    Science.gov (United States)

    Morales Robredo, Angel Luis

    The characterization and application of magnetoelastic materials to problems of vibration control is tackled in this thesis. Although this subject has been thoroughly studied since the nineteenth century, and despite the fact that this type of material is currently of topical interest due to their use as smart materials in several fields of science and engineering, there is room for further research in this field, specially in topics concerning measurement and application of DeltaE- and DeltaΨ- effects. Throughout this work, several contributions can be found. First, a new experimental system for measuring both DeltaE- and DeltaΨ- effects, simultaneously, has been developed with new or improved features. Second, this new experimental system has been used to characterize in depth the three classical ferromagnetic materials, nickel, cobalt and iron, and also Terfenol-D, a special alloy which shows a great magnetoelastic response. Third, the influence of internal stresses on both DeltaE- and DeltaΨ- effects has been studied by means of different heat treatments applied to nickel specimens. And fourth, the more suitable materials regarding their DeltaE- and DeltaΨ- effects were selected and applied to novel ways of vibration control. The results obtained in the different parts of this thesis are, in our humble opinion, very valuable. Regarding the new experimental system, the improvements endow the method with notable advantages over other techniques, such as lack of mechanical or magnetic interaction with the specimen, high accuracy and resolution in magnetic field, speed of measurement, no need for sample preparation, possibility of studying stress dependence, full automation and integration of the measurement and post-processing stages. Regarding the measurement of DeltaE- and DeltaΨ- effects, our results agree with the literature but provide better accuracy. Terfenol-D shows the highest DeltaE-effect (95%), followed at a great distance by nickel (3

  6. Planets in a Room

    Science.gov (United States)

    Giacomini, l.; Aloisi, F.; De Angelis, I.

    2017-09-01

    Teaching planetary science using a spherical projector to show the planets' surfaces is a very effective but usually very expensive idea. Whatsmore, it usually assumes the availability of a dedicated space and a trained user. "Planets in a room" is a prototypal low cost version of a small, spherical projector that teachers, museum, planetary scientists and other individuals can easily build and use on their own, to show and teach the planets The project of "Planets in a Room" was made by the italian non-profit association Speak Science with the collaboration of INAF-IAPS of Rome and the Roma Tre University (Dipartimento di Matematica e Fisica). This proposal was funded by the Europlanet Outreach Funding Scheme in 2016. "Planets in a room" will be presented during EPSC 2017 to give birth to the second phase of the project, when the outreach and research community will be involved and schools from all over Europe will be invited to participate with the aim of bringing planetary science to a larger audience.

  7. Room with a View: Ethical Encounters in Room 13

    Science.gov (United States)

    Grube, Vicky

    2012-01-01

    In this article, the author describes ethical encounters in Room 13, a schoolroom where children made what they wanted, posed their own questions, and ran an art room like a small business. In Room 13 children had the responsibility to maintain all aspects of the art studio. Specific decisions fell to an annually elected management team, a small…

  8. The Scattering Law for Room Temperature Light Water; Loi de diffusion dans l'eau legere a la temperature ambiante; Zakon rasseyaniya nejtronov legkoj vodoj komnatnoj temperatury; Ley de dispersion del agua ligera a temperatura ambiente

    Energy Technology Data Exchange (ETDEWEB)

    Kottwitz, D A; Leonard, Jr, B R [Hanford Laboratories, General Electric Company, Richland, WA (United States)

    1963-01-15

    par le plus bas niveau de vibrations moleculaires, qui se trouve dans le voisinage de {beta} = 8. Dans cette region, la distribution p({beta}) mesuree comporte un domaine a pente douce, ce qui indique que le pic de vibrations a ete efface a cause de la resolution large des instruments. L'integrale de normalisation de la distribution p({beta}) mesuree est plus elevee que sa valeur theorique. (author) [Spanish] Los autores han utilizado el espectrometro de cristal triaxial de Hanford para determinar la ley de dispersion de Egelstaff en el caso del agua ligera a 22{sup o}C, con variacion del vector de onda neuttonica hasta 14A{sup -1} y transferencias de energia del orden de 0,05 a 0,25 eV. Los valores de la energfa neuttonica inicial fueron 0,15, 0,20, 0,30 y 0,40 eV, y los angulos de dispersion variaron de 4{sup o} a 72{sup o}. La dispersion por una muestra de vanadio a 77{sup o}K (25{sup o}C) ha servido para determinar el poder de resolucion del espectrometro y las funciones de rendimiento. La ley de dispersion S({alpha},{beta}) y la distribucion de frecuencia generalizada p({beta}) derivada de la misma concuerdan esencialmente en la region de superposicion con los resultados obtenidos por Haywood y Thorson en Chalk River. La funcion p({beta}) se ha ampliado hasta {beta} {approx} 10 a fin de incluir la region ocupada por los niveles de vibracion molecular mues bajos, en las proximidades de {beta} = 8. En este intervalo, la distribucion p({beta}) medida presenta un rellano de pendiente poco acusada que indica que los picos de vibracion han sido difuminados por el escaso poder de resolucion del instrumento. La integral de normalizacion de los valores medidos de p({beta}) es superior a su valor teorico.

  9. Safety measures in exposure room

    International Nuclear Information System (INIS)

    Muhammad Jamal Md Isa

    2004-01-01

    The contents of this chapter are follows - The exposure room: location and dimension, material and thickness, windows, doors and other openings; Position of the Irradiating Apparatus, Use of Space Adjoining the Room, Warning Signs/Light, Dark Room. Materials and Apparatus: Classification of Areas, Local Rules, Other General Safety Requirements

  10. Room for a rethink?

    Energy Technology Data Exchange (ETDEWEB)

    Walker, S. [Independent Editorial and Technical Services, Oxford (United Kingdom)

    2000-05-01

    Room-and-pillar has traditionally satisfied the need for a low-cost, flexible coal mining system. Its downside can be low resource recovery. With accessible reserves falling steadily, can mining companies afford to accept this? Simon Walker looks into this problem using evidence presented recently on the US experience by Richard Bonskorski of the US Energy Information Administration, Dr Michael Karmis of Virgina Tech, Roger O'Quinn from Eimco, an equipment manufacturer, and Larry Howe from J H Fletcher. An urgent need is identified to develop new systems to allow significant gains in extraction, using novel concepts such as remote mining. 2 refs., 1 fig., 4 photos.

  11. Room for improvement

    DEFF Research Database (Denmark)

    Sandal, Louise F; Thorlund, Jonas B; Moore, Andrew J

    2018-01-01

    -reported outcomes and qualitative findings supported the primary finding, while improvements in muscle strength and aerobic capacity did not differ between exercise groups. CONCLUSION: Results suggest that the physical environment contributes to treatment response. Matching patients' preferences to treatment rooms...... significance (p=0.07). Waitlist group reported no improvement (-0.05 95% CI -0.5 to 0.4). In interviews, participants from the standard environment expressed greater social cohesion and feeling at home. Qualitative themes identified; reflection, sense of fellowship and transition. Secondary patient...... may improve patient-reported outcomes. TRIAL REGISTRATION NUMBER: ClinicalTrials.gov identifier: NCT02043613....

  12. Making room for volunteers

    DEFF Research Database (Denmark)

    Nielsen, Rasmus Kleis

    2012-01-01

    If campaigns do not accommodate this view, all but a hard core of regulars and fired-up partisans will drift away, leaving it for staffers and hired hands to do all the hard work of identifying voters, canvassing people by foot and by phone, and turning out the vote. [...] ironically, a campaign...... that is singleminded in its instrumental pursuit of victory can thus be less effective than one that is more accommodating- a campaign that makes room for volunteers by accepting that, unlike staffers, they come to politics with a different perspective and conception of what is and ought to be going on....

  13. On The Living Room

    Directory of Open Access Journals (Sweden)

    Thomas Richards

    2013-03-01

    Full Text Available This text discusses the work The Living Room, directed by the author, and reflects on its meanings and functions. The article confronts problems performance raises in relation to contemporary social life, bringing forward the isolation of life today and the possibilities performance offers to fight it. We problematise the crisis experienced by the author and the consequent creation of the work as a mobile performative device in relation to the staging space. Finally, the work questions the forms of interaction and type of participation possible in performance.

  14. Characterization of the voltage control systems and speed of a synchronous machine of high power for short circuit testing; Caracterizacion de los sistemas de control de voltaje y velocidad de una maquina sincrona de alta potencia para pruebas de corto circuito

    Energy Technology Data Exchange (ETDEWEB)

    Segura Ozuna, Victor Octavio; Hernandez Rodriguez, Isaura Victoria; Alcaide Godinez, Indira Xochiquetzal; Garduno Ramirez, Raul; Montero Cervantes, Julio Cesar [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Ruiz Rodriguez, Genaro; Martinez Torres; Ricardo [CFE-LAPEM, Irapuato, Guanajuato (Mexico)

    2012-07-01

    This paper introduces a characterization of the behavior of the speed and voltage control systems of a special purpose synchronous machine (GCC) based on measuring and monitoring physical signals, and recording of the sampled waveforms. Basically, the GCC supplies the energy to perform high-power short-circuits tests to certify electrical equipment and components, as required by the Comision Federal de Electricidad (CFE) in Mexico. The GCC operates alternately as motor and generator. With the GCC operating as motor, speed control during startup, acceleration, re-acceleration and braking is carried out by a static frequency converter (SFC). Complementary, the voltage controller manipulates excitation power to control terminal voltage when the GCC operates as generator and regulates excitation current when the GCC operates as motor. Compared to conventional voltage regulation systems, which must go off in case of short-circuit, the GCC voltage regulator must keep controlling field excitation to maintain the required line current and terminal voltage during short-circuit tests. Monitoring of physical signals was carried out with a portable data acquisition system based on SCXI and PXI digital platforms. A total of 78 signals were monitored with a 6 kHz sampling rate that was enough to obtain detailed signal waveforms. Data captured was processed and plotted for analysis. The signal graphs show the current real behavior of both, the voltage control system and the speed control system, and constitute a precise characterization of their behavior. [Spanish] Este documento presenta una caracterizacion del comportamiento de los sistemas de control de velocidad y voltaje de una maquina sincrona de proposito especial (GCC) basada en la medicion y monitoreo de senales fisicas, asi como en el registro de las formas de onda muestreadas. Basicamente, la GCC suministra la energia para efectuar pruebas de corto circuito de alta potencia para certificar equipo y componentes

  15. "Same Room, Safe Place".

    Science.gov (United States)

    Keene Woods, Nikki

    2017-04-01

    There are many different professional stances on safe sleep and then there is the reality of caring for a newborn. There is a debate among professionals regarding safe sleep recommendations. The continum of recommendations vary from the American Academy of Pediatrics (AAP) Safe Sleep Guidelines to the bed-sharing recommendations from the Mother-Baby Behavioral Sleep Laboratory. The lack of consistent and uniform safe sleep recommendations from health professionals has been confusing for families but has more recently raised a real professional ethical dilemma. Despite years of focused safe sleep community education and interventions, sleep-related infant deaths are on the rise in many communities. This commentary calls for a united safe sleep message from all health professionals to improve health for mothers and infants most at-risk, "Same Room, Safe Place."

  16. Hotel room suicide.

    Science.gov (United States)

    Zarkowski, Paul; Avery, David

    2006-10-01

    The objective of our research was to quantify the increased risk of suicide associated with registering in local hotels/motels. Medical examiner case files of suicide in King County, Washington, were reviewed for years 2002-2004. The incidence of suicide in local residents registering in local hotels/motels was 223/100,000 which is significantly greater than the incidence of suicide in the general population of King County (11.7/100,000 p Hotel/motel guests from outside Washington had a significantly reduced incidence of suicide (3.9/100,000 p = 0.002). The study results suggest that there is an increased risk of suicide in local residents who register in local hotel rooms.

  17. CEBAF Control Room Renovation

    International Nuclear Information System (INIS)

    Michael Spata; Anthony Cuffe; Thomas Oren

    2005-01-01

    The Machine Control Center (MCC) at Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) was constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facilities 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve on work-flow processes and ergonomic attributes. The renovation was performed in two phases during the summer of 2004, with one phase occurring during machine operations and the latter, more extensive phase, occurring during our semi-annual shutdown period. The new facility takes advantage of advances in display technology, analog and video signal management, server technology, ergonomic workspace design, lighting engineering, acoustic ceilings and raised flooring solutions to provide a marked improvement in the overall environment of machine operations

  18. [Hospital emergency rooms].

    Science.gov (United States)

    Tudela, Pere; Mòdol, Josep Maria

    2003-05-17

    Overuse of hospital emergency rooms (HERs) is parallel to their controversy. To understand this problem, some concepts should be first clarified. In HERs, there are some intrinsic aspects which are directly related to the emergency itself and thus cannot be modified (intermittent patient flow, need to prioritize, difficulty to achieve a rapid diagnosis, influence of time on treatment, value of clinical follow up, patient's expectations, impact of HER on the overall hospital working dynamics). On the other hand, there are some extrinsic aspects which indeed are not related to HER itself but are rather historically associated with it (precarious structure, delay on admission, lack of privacy, inadequate triage of cases, lack of professionalization); these latter aspects may be potentially modified and should be reconsidered.

  19. Room to Groove?

    DEFF Research Database (Denmark)

    Seabrooke, Leonard

    . As long as they stay within the parameters of legitimate financial practice to signal institutional isomorphism, the `groove', creditors may well allow borrowers room for change in self-determined ways. This paper maps out the historical and conceptual terrain concerning civilizing ideas about...... the legitimacy of financial practices within global capital markets, and investigates relationships between Western `civilizers' and Emerging Market Economies during the last two periods of financial globalization, the late-nineteenth/ early-twentieth centuries and the late-twentieth century.......The use of a `standard of civilization', a preferred form of socio-political organization, in global capital markets presents both constraints and opportunities for creditors and borrowers. When imposed, civilizing standards may change how a borrower would prefer to conduct their affairs. Creditors...

  20. CEBAF Control Room Renovation

    International Nuclear Information System (INIS)

    Michael Spata; Thomas Oren

    2005-01-01

    The Machine Control Center (MCC) at Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) was initially constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facility's 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve workflow processes and ergonomic attributes. This effort also sets the foundation for the redevelopment of the accelerator's control system to deliver high reliability performance with improvements in beam specifications management and information flow. The complete renovation was performed over a three-week maintenance period with no interruption to beam operations. We present the results of this effort

  1. CEBAF Control Room Renovation

    International Nuclear Information System (INIS)

    Michael Spata; Thomas Oren

    2005-01-01

    The Machine Control Center at Jefferson Lab's Continuous Electron Beam Accelerator Facility was initially constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facilities 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve on workflow processes and ergonomic attributes. This effort also sets the foundation for the redevelopment of the accelerator's control system to deliver high reliability performance with improvements in beam specifications management and information flow. The complete renovation was performed over a three-week period with no interruption to beam operations. We present the results of this effort

  2. Binaural room simulation

    Science.gov (United States)

    Lehnert, H.; Blauert, Jens; Pompetzki, W.

    1991-01-01

    In every-day listening the auditory event perceived by a listener is determined not only by the sound signal that a sound emits but also by a variety of environmental parameters. These parameters are the position, orientation and directional characteristics of the sound source, the listener's position and orientation, the geometrical and acoustical properties of surfaces which affect the sound field and the sound propagation properties of the surrounding fluid. A complete set of these parameters can be called an Acoustic Environment. If the auditory event perceived by a listener is manipulated in such a way that the listener is shifted acoustically into a different acoustic environment without moving himself physically, a Virtual Acoustic Environment has been created. Here, we deal with a special technique to set up nearly arbitrary Virtual Acoustic Environments, the Binaural Room Simulation. The purpose of the Binaural Room Simulation is to compute the binaural impulse response related to a virtual acoustic environment taking into account all parameters mentioned above. One possible way to describe a Virtual Acoustic Environment is the concept of the virtual sound sources. Each of the virtual sources emits a certain signal which is correlated but not necessarily identical with the signal emitted by the direct sound source. If source and receiver are non moving, the acoustic environment becomes a linear time-invariant system. Then, the Binaural Impulse Response from the source to a listener' s eardrums contains all relevant auditory information related to the Virtual Acoustic Environment. Listening into the simulated environment can easily be achieved by convolving the Binaural Impulse Response with dry signals and representing the results via headphones.

  3. Atendimento à crise psíquica no pronto-socorro: visão de profissionais de enfermagem La atención a la crisis psíquica en la unidad de urgencias: la visión del equipo de enfermería Psychic crisis care in the emergency room: nursing staff's view

    Directory of Open Access Journals (Sweden)

    Leandro da Rosa Borges

    2012-09-01

    Full Text Available O objetivo do estudo foi conhecer a visão da equipe de enfermagem sobre o atendimento à crise psíquica em uma unidade de emergência de um Pronto-Socorro. Trata-se de um estudo de abordagem qualitativa que utilizou, como técnica para coleta de dados, a aplicação de entrevistas semiestruturadas com dois enfermeiros e três técnicos de enfermagem que trabalhavam na unidade de emergência durante o turno da manhã e tarde. A análise dos dados foi orientada a partir da análise de conteúdo com formação das seguintes categorias temáticas, que permitiram a melhor visualização dos resultados: o conceito de crise para a equipe do pronto-socorro e as diferentes expressões do sofrimento e os recursos terapêuticos para o enfrentamento e a minimização dos encargos da crise. Evidenciou-se que a equipe de enfermagem costuma justificar as dificuldades de atendimento à crise psíquica pela falta de tempo, inadequação do espaço físico e despreparo da mesma.El presente estudio tuvo como objetivo conocer la visión del equipo de enfermería sobre la atención a la crisis psíquica en una unidad de urgencias. Se trata de un estudio de abordaje cualitativo que utilizó, como técnica de recolección de datos, entrevistas semiestructuradas. Participaron de la investigación dos enfermeras y tres técnicos de enfermería que trabajaban en la unidad de urgencias durante las mañanas y las tardes. El análisis de datos fue orientado a partir de las siguientes temáticas: el concepto de crisis para el equipo de una unidad de urgencias y las diferentes expresiones del sufrimiento y los recursos terapéuticos para el enfrentamiento y disminución de los encargos de la crisis. Suele justificar las dificultades de atención a la crisis por la falta de tiempo, inadecuación de espacio físico y la falta de preparación de la misma.This study was aimed at finding out the nursing staff's view about psychic crisis care in an emergency room unit. This is a

  4. O cuidado à puérpera com HIV/AIDS no alojamento conjunto: a visão da equipe de enfermagem El cuidado a la parturiente con VIH/SIDA en el alojamiento conjunto: la visión del equipo de enfermería The care to puerperae with HIV/AIDS in the multiple-patient rooms: the vision of the nursing team

    Directory of Open Access Journals (Sweden)

    Carla Luzia França Araújo

    2012-03-01

    , en particular en las acciones de prevención de la transmisión vertical del VIH.The study aims to analyze the vision that the nursing team has on the care to HIV -positive postpartum women and implementation of prevention of vertical transmission of HIV in the rooms. It is a qualitative research approach. It was conducted in a maternity in the municipality of Nova Iguaçu / Rio de Janeiro. The collective subject discourse was used as a technical and methodological resource. After analyzing the speeches we see that the nursing staff does not have a proper approach to the postpartum seropositive. The implementation of actions developed in multiple patient rooms for the prevention of vertical transmission of HIV was not recognized by the study subjects. We conclude that there is a need for the nursing staff assisting in the multiple patient rooms to have better qualification regarding the assistance to mothers with HIV, in particular on the vertical transmission of HIV prevention actions.

  5. Leadership in the control room

    International Nuclear Information System (INIS)

    McDougall, S.J.

    2006-01-01

    This paper discusses the importance of leadership within the control rooms at nuclear power facilities. the leadership capability of control room staff has a significant influence over the improvement of human performance and the development of an 'event free' culture within the business. The development of leadership competency in the control room must be an important part of any nuclear power utility business improvement plan. (author)

  6. Leadership in the control room

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, S.J. [Bruce Power, Bruce B Operations Div., Tiverton, Ontario (Canada)

    2006-07-01

    This paper discusses the importance of leadership within the control rooms at nuclear power facilities. the leadership capability of control room staff has a significant influence over the improvement of human performance and the development of an 'event free' culture within the business. The development of leadership competency in the control room must be an important part of any nuclear power utility business improvement plan. (author)

  7. Peces del Noroeste del Ecuador

    OpenAIRE

    Barriga, Ramiro

    1994-01-01

    La ictiofauna del occidente del Ecuador es poco conocida. Los peces del noroccidente son diferentes a los del suroccidente del Ecuador. 34 familias y 82 especies fueron colectadas que equivale al 11 % de las especies de peces continentales registradas en el Ecuador. Icteogeográficamente se sabe que la costa ecuatoriana posee dos provincias: la del Pacifico Norte y la del Guayas, se determinó que el límite de las dos provincias es el río Santiago ya que las especies del mencionado río so...

  8. Modern control room for AHWR

    International Nuclear Information System (INIS)

    Verghese, Clement C.; Joseph, Jose; Biswas, B.B.; Patil, R.K.

    2005-01-01

    Advanced Heavy Water Reactor (AHWR) is a next generation nuclear power plant being developed by Bhabha Atomic Research Centre. A modern control room has been conceived for operation and monitoring of the plant in tune with the advanced features of the reactor. A state of the art C and I architecture based on extensive use of computers and networking has been conceived for this plant. This architecture enables the implementation of a fully computerised operator friendly control room with soft HMIs. Features of the modern control room and control room and concept of soft HMI based operator interfaces have been described in the paper. (author)

  9. More room for ISOLDE

    CERN Multimedia

    2005-01-01

    To meet the needs of the new ISOLDE experiments, a new extension has been added to the facility's Building 170. The new extension to Building 170. Moving around the ISOLDE hall was almost like an obstacle course until now. The facility's Building 170 simply didn't have an inch to spare and the ISOLDE team's need to set up new experiments, whose installation could have created difficulties from the safety point of view, only exacerbated the problem. "We had ambitious plans to develop new experiments but no room for them", says Mats Lindroos, ISOLDE's technical coordinator. The only solution was to extend the existing building". This was how a new building saw the light of day. Measuring 24 metres long, 20 metres wide and 12 metres high, it is an extension to the existing Building 170 and should be ready for use this year. The new structure makes use of the existing infrastructure, with part of the end wall of Building 170 being kept as a support for steel platforms. The top of this wall had to be cut away ...

  10. Madness in Sartre's "The Room"

    NARCIS (Netherlands)

    Jongeneel, E.C.S.

    2009-01-01

    In "The Room," part of his short story collection, The Wall (1938), Jean-Paul Sartre investigates madness as an alternative way of bourgeois life and thus takes a stand in the contemporary debate on the existential status of mental illness. "The Room" is a case-study of a "limit situation," as well

  11. A control room lighting study

    International Nuclear Information System (INIS)

    Vaidya, V.V.; Iwasa-Madge, K.M.; Howard, B.; Willson, R.B.

    1984-01-01

    Operators at a Heavy Water Plant in Ontario, Canada complained about lighting-related difficulties in the control room. The Human Factors Engineering Unit was requested to perform a lighting survey and make recommendations to improve the control centre lighting conditions. This paper describes the control room, the operator tasks, the procedures used for the lighting survey, the findings, and the changes recommended

  12. Fire protection for clean rooms

    International Nuclear Information System (INIS)

    Kirson, D.

    1990-01-01

    The fire protection engineer often must decide what size fire can be tolerated before automatic fire suppression systems actuate. Is it a wastepaper basket fire, a bushel basket fire...? In the case of state-of-the-art clean rooms, the answer clearly is not even an incipient fire. Minor fires in clean rooms can cause major losses. This paper discusses what a clean room is and gives a brief overview of the unique fire protection challenges encountered. The two major causes of fire related to clean rooms in the semiconductor industry are flammable/pyrophoric gas fires in plastic ducts and polypropylene wet bench fires. This paper concentrates on plastic ductwork in clean rooms, sprinkler protection in ductwork, and protection for wet benches

  13. CARACTERIZACION FENOTIPICA Y TIPIFICACION MOLECULAR DE CEPAS DE CRYPTOCOCCUS NEOFORMANS AISLADAS DE MUESTRAS CLINICAS EN HOSPITALES TERCIARIOS DEL SUR DE CHILE

    OpenAIRE

    BARRIA I., YOLANDA B.

    2012-01-01

    Criptococosis es una micosis sistémica oportunista causada por dos especies levaduriformes capsuladas, C. neoformans causan infecciones en individuos immunodeprimidos ptincipalmente y Criptococcus gattii lo hace tanto en immunocompetentes como en personas inmunodeprimidas. C. neoformans es comúnmente asociado a excretas de palomas mientras que la especie C. gattii es encontrado en especies arbóreas como eucaliptos, ficus y otras. C neoformcms se subdivide en dos variedades distintas neofor...

  14. Preparation and structural characterization of the thermoluminescent material CaSO{sub 4}: Dy; Preparacion y caracterizacion estructural del material termoluminiscente CaSO{sub 4}: Dy

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez R, A.; Azorin, J. [UAM-I, 09340 Mexico D.F. (Mexico); Gonzalez M, P.R. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Rivera, T. [CICATA-IPN, Legaria 694, 11500 Mexico D.F. (Mexico)

    2005-07-01

    The grade of crystallinity of a material is important so that the one is presented the thermoluminescence phenomenon; for what is necessary to study those structural characteristic of a TL material and to correlate them with its TL response when being irradiated with ionizing radiation. The calcium sulfate activated with Dysprosium (CaSO{sub 4}: Dy) it is a material that has demonstrated its efficiency in the dosimetry of the ionizing radiation for the thermoluminescence method. In this work the structural characterization of this prepared material for the recrystallization method by means of the evaporation of the solvent and their relationship with their TL response is presented. The results showed that the best material to be used in thermoluminescent dosimetry presents a crystalline structure in orthorhombic phase and a particle size in the interval of 80 {mu}m to 200 {mu}m. (Author)

  15. Synthesis and structural characterization of amorphous alloys of the Fe-Ni-B type; Sintesis y caracterizacion estructural de aleaciones amorfas del tipo Fe-Ni-B

    Energy Technology Data Exchange (ETDEWEB)

    Cabral P, A.; Jimenez B, J.; Garcia S, I. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2004-07-01

    It was prepared the alloy FeNiB for chemical reduction, using four p H values (5, 6, 7 and 7.5). To p H=6 partially oxidized particles were obtained, between 16 and 20%. In the synthesis to other p H values, the obtained particles were highly oxidized (65-90%) according to the X-ray diffraction results, in all the preparations the particles were partially crystallized, with crystal size that varied between 4 and 10 nm. The structure of these particles can be consider that they are formed by a nucleus due to the alloy and an oxide armor recovering it. (Author)

  16. Characterization of sugar cane bagasse: part II: fluid dynamic characteristics; Caracterizacion del bagazo de la cana de azucar: parte II: caracteristicas fluidodinamicas

    Energy Technology Data Exchange (ETDEWEB)

    Alarcon, Guillermo A. Roca [Universidad de Oriente (CEEFE/UO), Santiago de Cuba (Cuba). Centro de Estudios de Eficiencia Energetica], Emails: roca@ceefe.uo.edu.cu, grocabayamon@hotmail.com; Sanchez, Caio Glauco [Universidade Estadual de Campinas (FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica], Email: caio@fem.unicamp.br; Gomez, Edgardo Olivares [Universidade Estadual de Campinas (NIPE/UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico], Emails: gomez@bioware.com.br, egomez@energiabr.org.br; Cortez, Luis Augusto Barbosa [Universidade Estadual de Campinas (NIPE/FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola. Nucleo Interdisciplinar de Planejamento Energetico], Email: cortez@reitoria.unicamp.br

    2006-07-01

    This paper is the second part of a general study about physic-geometrical and fluid-dynamics characteristic of the sugarcane bagasse particles. These properties has relevant importance on the dimensions and operation of the equipment for transport and treatment of solid particles. Was used the transport column method for the determination of the drag velocity and later on the drag coefficient of the sugarcane bagasse particles was calculated. Both, the installation and experimental technique used for materials of these characteristics are simple and innovations tools, but rigorous conceptually, thus the results obtained are reliable. Were used several sugarcane bagasse fractions of particles of known mean diameter. The properties determined were expressed as a function of Reynolds and Archimedes a dimensional criteria. The best considered model from statistical analysis (model from equation 8) was statistically validated for determined ranges of Reynolds and Archimedes. These empirical equations can be used to determine these properties in the range and conditions specified and also for modeling some processes where these fractions are employed. (author)

  17. Endoscopic, epidemiologic and clinic characterization of the colorectal cancer in geriatric patients;Caracterizacion clinica, epidemiologica y endoscopica del cancer colorrectal en pacientes geriatricos

    Energy Technology Data Exchange (ETDEWEB)

    Umpierrez Garcia, Ibis [Hospital Militar Docente ' Dr Mario Munnoz Monroy' , Matanzas (Cuba); Norma, Herrera Hernandez [Hospital Universitario Clinico-Quirurgico ' Cmdte Faustino Perez Hernandez' Matanzas (Cuba); Hernandez Ortega, Ania [Hospital Territorial Docente ' Mario Munnoz Monroy' , Municipio de Colon, Matanzas (Cuba)

    2009-07-01

    The colorectal cancer is a serious health problem because of its high incidence. In Cuba, this disease is the fourth neoplasm in order of frequency with a rate of 17.1 per 100 000 inhabitants. With the objective of determining the precocious diagnosis of this complaint we carried out a prospective, longitudinal and descriptive study among geriatric patients with colorectal disease assisting to consultation at the policlinic 'Carlos Verdugo' of Matanzas in the period from January 2006 to December 2007. The studied parameters were age, genre, risk facts, presentation forms, localization, and endoscopic diagnosis of the disease. The results showed predominance of female sex (52,1 %), in ages from 60 to 69 years old (59.3 %), predominating risk facts like familiar antecedents (13,5 %), idiopathic ulcerative colitis (8.1 %), and an inadequate diet (35.1 %). The most used diagnostic method was colonoscopy (18 patients), with predominance of the rectosigmoidal cancer (15 cases), being the polypoid one the most common endoscopic kind (13 %). We concluded that generally there is not a precocious diagnosis of the colorectal cancer among geriatric patients, leading to a decrease of the healing possibilities and surviving of these patients

  18. Study and structural and chemical characterization of human dental smalt by electron microscopy; Estudio y caracterizacion estructural y quimico del esmalte dental humano por microscopia electronica

    Energy Technology Data Exchange (ETDEWEB)

    Belio R, I A; Reyes G, J [Instituto de Fisica, UNAM, A.P. 20-364, 01000 Mexico D.F. (Mexico)

    1998-07-01

    The study of human dental smalt has been subject to investigation for this methods with electron microscopy, electron diffraction, X-ray diffraction and image simulation programs have been used with the purpose to determine its chemical and structural characteristics of the organic and inorganic materials. This work has been held mainly for the characterization of hydroxyapatite (Ca){sub 10} (PO{sub 4}){sub 6} (OH{sub 4}){sub 2}, inorganic material which conforms the dental smalt in 97%, so observing its structural unity which is composed by the prisms and these by crystals and atoms. It was subsequently initiated the study of the organic material, with is precursor of itself. (Author)

  19. Physical chemistry characterization of soils of the Storage Center of Radioactive Wastes; Caracterizacion fisico-quimica de suelos del Centro de Almacenamiento de Desechos Radioactivos

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez T, U. O.; Fernandez R, E. [Instituto Tecnologico de Toluca, Av. Tecnologico s/n, 52140 Metepec, Estado de Mexico (Mexico); Monroy G, F.; Anguiano A, J., E-mail: uohtrejo@gmail.com [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (MX)

    2011-11-15

    Any type of waste should be confined so that it does not causes damage to the human health neither the environment and for the storage of the radioactive wastes these actions are the main priority. In the Storage Center of Radioactive Wastes the radioactive wastes generated in Mexico by non energy applications are storage of temporary way. The present study is focused in determining the physical chemistry properties of the lands of the Storage Center of Radioactive Wastes like they are: real density, ph, conductivity percentage of organic matter and percentage of humidity. With what is sought to make a characterization to verify the reaction capacity of the soils in case of a possible flight of radioactive material. The results show that there are different density variations, ph and conductivity in all the soil samples; the ph and conductivity vary with regard to the contact time between the soil and their saturation point in water, for the case of the density due to the characteristics of the same soil; for what is not possible to establish a general profile, but is necessary to know the properties of each soil type more amply. Contrary case is the content of organic matter and humidity since both are in minor proportions. (Author)

  20. Zoning and Geotechnical Characterization of soils from the port of Veracruz; Zonificacion y Caracterizacion geotecnica de los Suelos del Puerto de Veracruz

    Energy Technology Data Exchange (ETDEWEB)

    Lenz, O.; Ochoa Sanchez, O. A.

    2012-07-01

    Describes the geological province that hosts the city of Veracruz and the morphological traits that resulted from the activity that preceded the Quaternary on the other hand, presents the geotechnical characteristics of the soil, which constitute the different deposits that make up the ground to throughout the length and breadth of the urban sprawl from Veracruz and urban areas, and then after, make a zoning proposal from the point of view geotechnical. (Author) 25 refs.

  1. Physicochemical characterization and thermal behavior of guanabana (Annona muricata) seed almond oil; Caracterizacion fisicoquimica y comportamiento termico del aceite de almendra de guanabana (Annona muricata, L)

    Energy Technology Data Exchange (ETDEWEB)

    Solis-Fuentes, J. A.; Amador-Hernandez, C.; Hernandez-Medel, M. R.; Duran-de-Bazua, M. C.

    2010-07-01

    In this work some physicochemical properties and the thermal behavior and stability of sour sop or guanabana (Annona muricata) seed almond oil were studied by means of chemical, DSC and TG analysis. The results showed that the almond has 2.5% ash, 17.9% crude fiber, 15.7% protein, 26.0% de carbohydrates and 37.7% oil (dry base). The composition of almond oil showed 68.5% unsaturated fatty acids, mainly oleic and linoleic, and some palmitoleic acids, and 31.5% saturated, principally palmitic and stearic fatty acids; refraction index was 1.468 and saponification and iodine value were 168.2 and 87.0, respectively. DSC thermal analysis showed that oil crystallization initiates at -4.5 degree centigrade and ends at -79.0 degree centigrade with a crystallization enthalpy of 48.2 J/g; the oil melts in a temperature range from -42.4 to -16.9 degree centigrade, with a maximum peak at -15 degree centigrade and a fusion enthalpy of 80.5 J/g. The oil remained liquid at refrigeration temperatures with minimal SFC and free of crystals at temperatures over 10 degree centigrade. TG analysis showed that the thermal decomposition of the oil in a N{sub 2} atmosphere starts at 380 degree centigrade and ends at 442 degree centigrade, with a maximum decomposition rate at 412 degree centigrade. Under oxidizing conditions its decomposition begins at 206 degree centigrade and concludes at 567 degree centigrade. In accordance with this study, sour sop almond seed contains large amounts of an oil that possesses similar characteristics to those of salad and cooking oils. (Author) 28 refs.

  2. Microstructural characterization of archaeological samples coming from La Venta park, Tabasco, Mexico; Caracterizacion microestructural de muestras arqueologicas procedentes del parque La Venta Tabasco, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa P, M.F.; Rodriguez L, V.; Martinez, G. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    The Olmec culture was the first meso american civilization it presents its main establishment at the Veracruz and Tabasco states in Mexico. Owing to in time and to the weathering factors of the region as warmth, acid rain and that great humidity existing in the environment among others that have been provoked great erosion and damage on the pre hispanic monuments. Through Sem technique it was achieved the microstructural characterization of materials which conform the samples that correspond to those monuments where fundamentally feldspars have been found. It was determined the elemental composition of samples through Emission dispersive X-ray diffraction technique, the crystalline phases existing in samples were determined mainly finding feldspars, so of this way it was corroborated those obtained results through Sem. The materials characterization that are part of these pre hispanic monuments of La Ve nta park is essential for its conservation minimizing so the damage to pre hispanic pieces. (Author)

  3. Characterisation of the nitrate contamination process in the Seville-Carmona aquifer system; Caracterizacion del proceso de contaminacion por nitratos en el sistema acuifero Sevilla-Carmona

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Vazquez, J.C.; Grande Gil, J.A. [Universidad de Huelva (Spain); Barragan de la Rosa, F.J.; Jimenez Sanchez, J.C. [Universidad de Sevilla (Spain)

    1998-07-01

    The aim of this work is to characterize the aquifer Sevilla-Carmona by a graphic treatment, in order to determine the environmental problem owing to high concentration of nitrates because of the fact that there are an excessive agricultural fertilization. There is a relationship between the highest nitrate contamination and the crop of the area, mainly cotton and potato. Two factors have been observed to have an influence on this aquifer: excess doses of N- fertilizers and irrigation devices whose excessive water discharge results in leaching of nitrate accumulated in soil and finally toward saturated zone because of rain. (Author) 18 refs.

  4. Synthesis by plasma and characterization of semiconductor compounds derived of polyacetylene; Sintesis por plasma y caracterizacion de compuestos semiconductores derivados del poliacetileno

    Energy Technology Data Exchange (ETDEWEB)

    Vasquez, M.; Cruz, G. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Timoshina, T. [ESIQIE-IPN, 07738 Mexico D.F. (Mexico); Olayo, R. [UAM-I, 09340 Mexico D.F. (Mexico)

    2003-07-01

    In this work it is made a study of the structure and electric properties of chlorate polyethylene (PE-CI) with double and simple bonds obtained by continuous plasma with resistive coupling to 13.5 MHz. The synthesis conditions are power between 10 and 14 W and pressure of (6-7) x 10{sup -2} Torr. The synthesized PE-Cl in that way is soluble in acetone what indicates that probably is formed of short chains and not it shows the generalized inter crossing that is presented in some syntheses by plasma and that it can degrade the electric properties of these polymers. The IR and XPS analysis show the vibration of the C-C, C=C and C-CI bonds. The morphology of the polymer after being dissolved shows a compact and flat configuration. The electric conductivity has an approximately lineal behavior in an interval of 35 to 90% of relative humidity. (Author)

  5. Neutrons characterization of the nuclear reactor Ian-R1 of Colombia; Caracterizacion de los neutrones del reactor nuclear IAN-R1 de Colombia

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez P, L. X.; Martinez O, S. A. [Universidad Pedagogica y Tecnologica de Colombia, Grupo de Fisica Nuclear Aplicada y Simulacion, Carretera Central del Norte Km. 1, Via Paipa, 150003 Tunja, Boyaca (Colombia); Vega C, H. R., E-mail: s.agustin.martinez@uptc.edu.co [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

    2014-08-15

    By means of Monte Carlo methods, with the code MCNPX, the neutron characteristics of the research nuclear reactor Ian-R1 of Colombia, in power off but with the neutrons source in their start position, have been valued. The neutrons spectra, the total flow and their average power were calculated in the irradiation spaces inside the graphite reflector, as well as in the cells with air. Also the spectra, the total flow and the absorbed dose were calculated in several places distributed along the radial shaft inside the water moderator. The neutrons total flow was also considered to the long of the axial shaft. The characteristics of the neutrons spectra vary depending on their position regarding the source and the material that surrounds to the cell where the calculation was made. (Author)

  6. Characterization of sugar cane bagasse: part 1: physical characteristics; Caracterizacion del bagazo de la cana de azucar: parte 1: caracteristicas fisicas

    Energy Technology Data Exchange (ETDEWEB)

    Alarcon, Guillermo A. Roca [Universidad de Oriente (UO/CEEFE), Santiago de Cuba (Cuba). Centro de Estudios de Eficiencia Energetica], Emails: roca@ceefe.uo.edu.cu, grocabayamon@hotmail.com; Sanchez, Caio Glauco [Universidade Estadual de Campinas (FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica], Email: caio@fem.unicamp.br; Gomez, Edgardo Olivares [Universidade Estadual de Campinas (NIPE/UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico], Emails: gomez@bioware.com.br, egomez@energiabr.org.br; Cortez, Luis Augusto Barbosa [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola], Email: cortez@reitoria.unicamp.br

    2006-07-01

    Fine materials or particles are often encountered in many industrial processes and in our daily life. Some examples are: salt or sugar; sand; cleaning products; fertilizer; cement; calcium hydroxide; some residues of energy biomass, for instance, sugar cane bagasse, straw of sugar cane, saw dust, straw of rice, and even, other types of particulates as aerosols, and residual ash from combustion processes of conventional solids. During the preparation and handling of these materials and also for design and optimization of some multiphase processes and equipment associated with them, as classifying, transport and pneumatic drying, and thermo chemical conversion systems, in general, it is indispensable knowing the principal physical and fluid dynamic characteristics or properties, which not always are available or well established. In this paper the Ergun Method is employed, which is based on theoretical equations established for a fixed bed of porous particles when it is crossed by a gas flow. From this expression and measurements of pressure loss for a given flow of gas crossing the bed at different heights, it is possible to determine some physical characteristics, as bulk density, real density, porosity, sphericity, and specific surface of the bed particles. The technique used for obtaining experimental data is simple but rigorous and it is possible to reproduce these data. Were tested several fractions of bagasse obtained by the conventional sieving process. Finally it was statistically processed all experimental results obtaining the corresponding mathematical models for the desired properties as a function of the mean diameter of the particles. These empirical equations can be used to determine these properties in the range and conditions specified and also for modeling some processes where these fractions are employed. (author)

  7. Synthesis and characterization of ferrous phosphate (vivianite) and its behavior in aqueous media; Sintesis y caracterizacion del fosfato ferroso (vivianita) y su comportamiento en medio acuoso

    Energy Technology Data Exchange (ETDEWEB)

    Diaz F, J.C

    2003-07-01

    The synthesis and characterization of materials that can be useful in Environmental Chemistry is very important because their characteristics are exposed and its behavior in chemical phenomena as the sorption in aqueous media is understand to use it in the human being benefit. With the object of using, in a future, the octa hydrated ferrous phosphate (vivianite) as a potential candidate for matrix confinement in contention walls for the storage of radioactive waste of long half life, it was synthesized and it characterized physico chemically and their properties of surface of this compound were evaluated. Presently work was carried out the synthesis and structural characterization of the iron phosphate II by infrared spectroscopy with having Fourier transform, high vacuum scanning electron microscopy, X-ray diffraction, thermal gravimetric analysis, the BET multipoint surface area and Moessbauer spectroscopy; as well as, the determination between aqueous media of the isoelectric point and the density of sites of surface of the compound. The octa hydrated ferrous phosphate was obtained pure. The results indicate that the product corresponds to the prospective mineral, the vivianite. The thermal gravimetric analysis demonstrated that the ferrous phosphate is a stable salt after the lost of water. The isoelectric point is since an important parameter because allows to know the behavior of the surface of the material in aqueous systems, in this case the isoelectric point, of the octa hydrated ferrous phosphate, in distilled water is of pH 4.20 and in solution of potassium nitrate 0.5 M is of pH = 3.75. This indicates that the material has an amphoteric surface depending on the pH. On the other hand, the density of active sites of surface obtained by titrations acid-base is of 20 sites by nm{sup 2}. (Author)

  8. Characterization of rock samples localized in some sites of the Mexican Pacific coast; Caracterizacion de muestras de rocas localizadas en algunos sitios de la costa del Pacifico Mexicano

    Energy Technology Data Exchange (ETDEWEB)

    Pena, P.; Torre, J. de la; Falcon, T.; Segovia, N. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico); Azorin, J. [Universidad Autonoma Metropolitana-Iztapalapa C.P. 09340 Mexico D.F. (Mexico)

    1999-07-01

    Geophysical studies in zones of high seismicity have showed differences in the content of radioactive material that is used in the study of the geochemical behavior of the subsoil. In an emanometric mapping of radon in soil realized in the Mexican Pacific coast were finding distinct levels in zones with different lithology. With the finality to know the mineralization types in two zones of study which are localized in the Guerrero coast and they belonging to terrains named Guerrero and Xolapa it was determined the mineralogic characteristics in two types of rocks. The identification of the rocks was realized by X-ray diffraction and was determined the elemental chemical composition using a scanning electron microscope. It was indicated in the results obtained that in the two types of rocks were found minerals such as: quartz, albite, microcline anortite, ferroactinolite and biotite. However, it was found differences between them by the presence of their mineralogic compounds because in the rock belonging to Xolapa terrain were presented whereas in the rock localized in the Guerrero terrain were presented sodic and potassic feldspars. The analysis by the Elemental Chemical Composition technique (Energy Dispersive Spectroscopy) corroborated the results obtained by the X-ray diffraction technique. (Author)

  9. Characterization of an AISI H-13 steel for work in hot; Caracterizacion del acero H-13 AISI para trabajado en caliente

    Energy Technology Data Exchange (ETDEWEB)

    Godinez, J.; Robles, E. [Instituto Nacional de Investigaciones Nucleares, Departamento de Sintesis y Caracterizacion de Materiales, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1998-07-01

    Two materials were acquired which elaborated through secondary refining processes known as electroslag refusing (ESR) and electric arc in vacuum refusing (VAR) were acquired. These materials were thermically treated, for subsequently to determine their mechanical properties in longitudinal and transversal directions with respect to rolling direction, moreover they were characterized through scanning electron microscopy and X-ray diffraction determining microstructure, carbides and non-metallic inclusions. The results of the mechanical essays allowed to evaluate the fracture toughness to this steel by the Barsom and Rolfe method. (Author)

  10. Experimental characterization of the thermal and solar behavior of constructed houses; Caracterizacion experimental del comportamiento termico y solar de viviendas construidas

    Energy Technology Data Exchange (ETDEWEB)

    Carrillo, A.; Jurado, L.; Molina, J. C.; Druet, L.

    2008-07-01

    Nowadays, detailed simulation models are widely used to assess thermal performance of buildings, specially during the design stage. However it is usual to report significant differences in predicted thermal performance when confronted with measured data. Therefore the model should be calibrated. In this paper, the PSTAR framework (Subbarao, 1988) is used to calibrate a Energy Plus model of a single-family dwelling. PSTAR method yields a set of renormalization coefficients that offer quantitative interpretation of the predicted vs measured differences. Other experimental tests are used to gain additional insight on how the model should be twicked judiciously. Once calibrated, the model matches three important thermal parameters of the real buildings: heat loss coefficient, thermal mass and solar gains. (Author)

  11. Control room lay-out

    International Nuclear Information System (INIS)

    Toma, Violeta

    2004-01-01

    TRIUMF (Tri-University Meson Facility) is Canada's national laboratory for particle and nuclear physics. There are 6 accelerators and 3 Control Rooms at TRIUMF. The main control room serves the big cyclotron, the 500 MeV, and the adjacent experiment. The 42 MeV and two 32 MeV ones are production dedicated. These cyclotrons belong to a private company but are operated by TRIUMF staff from ATG (Applied Technology Group) Control Room. The last is ISAC (Isotope Acceleration and Separation) Control Room, from which the LINAC is controlled. Research areas cover theoretical (2 subjects), pure (5 subjects) and applied (8 subjects) physics. In the early '70s, as the 500 MeV was being completed, the first Control Room was built in the main accelerator building. The recent topics covered by this paper are proton and pion therapy, what are the operator's duties?, the CP42, TR30 and TR13 cyclotron control rooms, the ISAC control systems including control room modification. Due to the nature of an operator's job, the Control Room layout is pretty important. This is true for any work environment, but when working shifts it becomes essential. Lots of time and effort, not to mention money, were spent to figure out the optimum configuration. It seems to me that the key factor in the control room layout is versatility, and this is because it has to keep happy a group of people with different inclinations, which have a tendency to become quite moody after the second night shift. No matter what, there will still be unhappy people, but we are trying our best. (Y. Tanaka)

  12. A exclusão do pai da sala de parto: uma discussão de género e poder La exclusión del padre de la sala de partos: una discusión bajo el enfoque del género y del poder Exclusion of the father from the delivery room: a discussion from the perspective of gender and power

    Directory of Open Access Journals (Sweden)

    Tharine Louise Gonçalves Caires

    2012-07-01

    Full Text Available No início do século XX, as mulheres eram consideradas incapazes e inferiores, dominadas por seus maridos. Estes eram deixados à margem dos acontecimentos ligados à reprodução e criação dos filhos. O parto era um ritual doméstico, assistido pela parteira. Sua transferência para o hospital retirou da mulher o protagonismo no processo de parir, e hoje o médico é a figura central. O objetivo deste estudo é analisar o processo de exclusão do pai no nascimento de seu filho sob a perspetiva das relações de poder no contexto da medicalização do parto. Trata-se de uma revisão de literatura, que analisou 16 textos, cujo recorte temporal foi de 2000 a 2010. Estes foram analisados segundo os núcleos temáticos: relação de poder do homem sobre a mulher, transição do parto em domicílio para o ambiente hospitalar, exclusão do pai do ambiente hospitalar, dominação médica sobre o corpo feminino e (reinserção do pai no processo de parturição. Conclui-se que a reinserção do homem no acompanhamento do nascimento de seu filho ainda não é plena, apesar de incentivada pelo Ministério da Saúde/Brasil. É preciso que profissionais e serviços de saúde se conscientizem da importância e benefícios desta atitude no processo de humanização do parto.A principios del siglo XX, se consideraba a las mujeres incapaces e inferiores, dominadas por sus maridos. Se dejaba a los hombres al margen de los eventos relacionados con la reproducción y con la educación de los niños. El parto era un ritual doméstico, asistido por matronas. Su transferencia al hospital, le retiró a la mujer el protagonismo en el proceso de parto, y hoy en día, el doctor es el actor central. Este estudio objetivó analizar el proceso de exclusión del padre del nacimiento de su hijo, bajo el enfoque de las relaciones de poder en el marco de la medicalización del parto. Se trata de una revisión sistemática de la literatura, en la que se analizaron 16 textos

  13. In the LEAR control room

    CERN Multimedia

    CERN PhotoLab

    1983-01-01

    View into the control room of the Low Energy Antiproton Ring (LEAR). Edgar Asseo (sitting) and Dieter Möhl and Georges Carron reflecting upon some beam dynamics (or hardware?) problem. Vassilis Agoritsas, in the background, leaning over a plan or a keyboard. LEAR in its early years (1982 to about 1990) was run from this local control room in building 363 close to the end of the PS South Hall, where the ring was installed. Later-on the operation was surveyed from the PS main control room.

  14. Ausências dos colaboradores de enfermagem do pronto-socorro de um hospital universitário Ausencias de los colaboradores de enfermería del servicio de emergencia de un hospital universitario Nursing staff absences in the emergency room of a university hospital

    Directory of Open Access Journals (Sweden)

    Flávio Trevisani Fakih

    2012-01-01

    Full Text Available OBJETIVO: Verificar e analisar as ausências dos colaboradores de enfermagem do pronto-socorro de adultos (PSA de um hospital universitário. MÉTODOS: Estudo de abordagem quantitativa, observacional e prospectivo, realizado de janeiro a dezembro de 2009, envolvendo os colaboradores de enfermagem de um PSA. RESULTADOS: O PSA teve, em média, 96,8 colaboradores por mês. As ausências previstas corresponderam a 30,1% dos dias de trabalho. A taxa de absenteísmo foi de 11,7%. Houve maior incidência de ausências não previstas no período de maio (15,3% e agosto (13,3%. CONCLUSÃO: Houve correlação entre as variáveis: categoria profissional; vínculo empregatício e turno de trabalho e a distribuição das ausências previstas e não previstas. O absenteísmo foi considerado elevado e motivado, sobretudo, pelas licenças para tratamento de saúde superiores a 15 dias. O déficit mensal de pessoal contribuiu também para a sobrecarga do trabalho da equipe.OBJETIVO: Verificar y analizar las ausencias de los colaboradores de enfermería de un servicio de emergencias de adultos (SEA de un hospital universitario. MÉTODOS: Estudio de abordaje cuantitativa, observacional y prospectivo, realizado de enero a diciembre del 2009, involucrando a los colaboradores de enfermería de un SEA. RESULTADOS: El SEA tuvo, en promedio, 96,8 colaboradores por mes. Las ausencias previstas correspondieron a 30,1% de los días de trabajo. La tasa de ausentismo fue de 11,7%. Hubo mayor incidencia de ausencias no previstas en el período de mayo (15,3% y agosto (13,3%. CONCLUSIÓN: Hubo correlación entre las variables: categoria profesional; vínculo empleaticio y turno de trabajo y la distribución de las ausencias previstas y no previstas. El ausentismo fue considerado elevado y motivado, sobre todo, por las licencias para tratamiento de la salud superiores a 15 días. El déficit mensual de personal contribuyó también para la sobrecarga del trabajo del equipo

  15. Efecto del BiFeO3 en las propiedades del sistema ferroeléctrico libre de plomo K0.5Na0.5NbO3

    Directory of Open Access Journals (Sweden)

    Pinza, Billy N.

    2014-10-01

    Full Text Available In order to obtain a multiferroic material, powders and ceramic pieces, of the lead-free ferroelectric (1-x-x K0.5Na0.5NbO3 (Bi0.8La0.2FeO3 (KNN-BLFO (x = 0.005, 0.010, 0.015, 0.020, 0.025 system were prepared using the combustion reaction method. For all the studied perovskite phase, stoichiometries feature KNN was obtained. Using characterisation techniques, it was determined that the BLFO is incorporated in the crystal structure of KNN without modifying present a phase transition. Moreover, It was also proved that the addition of the BLFO to KNN, alters the particle size of the obtained powders and generates magnetic behavior in this ferroelectric.En la búsqueda de un material multiferroico, se prepararon polvos y piezas cerámicas del sistema ferroeléctrico libre de plomo (1-xK0.5Na0.5NbO3-x(Bi0.8La0.2FeO3 (KNN-BLFO (x=0.005, 0.010, 0.015, 0.020, 0.025, mediante el método de reacción por combustión. Para todas las estequiometrias estudiadas se obtuvo la fase perovskita característica del KNN. Con las diferentes caracterizaciones se determinó que el BLFO se incorpora en la estructura cristalina del KNN modificándola sin que se presente una transición de fase. Se comprobó además que la adición del BLFO al KNN, altera el tamaño de partícula de los polvos obtenidos y genera comportamiento magnético en este ferroeléctrico.

  16. Control room philosophy: Principles of control room design and control room work

    International Nuclear Information System (INIS)

    Skriver, Jan; Ramberg, Jasmine; Allwin, Pernilla

    2006-01-01

    In order to provide insights for improvement of work in control rooms several factors have to be considered. Knowledge of principles including control room philosophies will guide the recommended improvements. In addition to knowledge about specific principles an advantage for an organization can be an understanding of similarities and policies used in other high risk industry. The report has been developed on the basis of a document analysis of international standards and other guiding documents. (NUREG 0711, ISO 11064, ISO 6385, IEC 60964). In addition to the document analysis which has strived to compare the documents to see similarities in important principals, experience from working with control room design, modifications and evaluations in other high risk industries has pervaded the report. Important principles have been identified which are recommended to be included in a control room philosophy. Many of these are similar to the principles identified in the international standards. An additional principal which is regarded as important is the utilization of Key Performance Indicators (KPI) which can be used as a measure to target preventative means. Further more it is critical that the control room philosophy is easy to access and comprehend for all users. One of the challenges that remain after having developed a control room philosophy is how to utilize it in the daily work situation. It is vital that the document remains as a living document, guiding the continual improvement of the control room in the various life cycle stages

  17. CDRH FOIA Electronic Reading Room

    Data.gov (United States)

    U.S. Department of Health & Human Services — The CDRH FOIA electronic reading room contains frequently requested information via the Freedom of Information Act from the Center for Devices and Radiological Health.

  18. Nuclear reactor control room construction

    International Nuclear Information System (INIS)

    Lamuro, R.C.; Orr, R.

    1993-01-01

    A control room for a nuclear plant is disclosed. In the control room, objects labelled 12, 20, 22, 26, 30 in the drawing are no less than four inches from walls labelled 10.2. A ceiling contains cooling fins that extend downwards toward the floor from metal plates. A concrete slab is poured over the plates. Studs are welded to the plates and are encased in the concrete. 6 figures

  19. The conference hybrid control room

    International Nuclear Information System (INIS)

    Gieci, A.; Caucik, J.; Macko, J.

    2008-01-01

    An original concept of a hybrid control room was developed for the Mochovce-3 and Mochovce-4 reactor units which are under construction. The basic idea underlying the concept is that the control room should be a main working place for the operators (reactor operator and turbine operator) and for the shift supervisor, designed as a comprehensive unit desk shaped so that all members of the control room crew are in a face-to-face contact constantly. The main desk consists of three clearly identified areas serving the operators and the unit supervisor as their main working places. A soft control system is installed at the main working places. A separate safety-related working place, designed as a panel with classical instrumentations at the conference hybrid control room, is provided in case of abnormal conditions or emergency situation. Principles of ergonomics and cognitive engineering were taken into account when designing the new conference hybrid control room for the Mochovce-3 and -4 reactor units. The sizes, propositions, shapes and disposition of the equipment at the control room have been created and verified by using virtual reality tools. (orig.)

  20. Characterization of the neutron flux in the Hohlraum of the thermal column of the TRIGA Mark III reactor of the ININ; Caracterizacion del flujo neutronico en el Hohlraum de la columna termica del reactor TRIGA Mark III del ININ

    Energy Technology Data Exchange (ETDEWEB)

    Delfin L, A.; Palacios, J.C.; Alonso, G. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: adl@nuclear.inin.mx

    2006-07-01

    Knowing the magnitude of the neutron flux in the reactor irradiation facilities, is so much importance for the operation of the same one, like for the investigation developing. Particularly, knowing with certain precision the spectrum and the neutron flux in the different positions of irradiation of a reactor, it is essential for the evaluation of the results obtained for a certain irradiation experiment. The TRIGA Mark III reactor account with irradiation facilities designed to carry out experimentation, where the reactor is used like an intense neutron source and gamma radiation, what allows to make irradiations of samples or equipment in radiation fields with components and diverse levels in the different facilities, one of these irradiation facilities is the Thermal Column where the Hohlraum is. In this work it was carried out a characterization of the neutron flux inside the 'Hohlraum' of the irradiation facility Thermal Column of the TRIGA Mark III reactor of the Nuclear Center of Mexico to 1 MW of power. It was determined the sub cadmic neutron flux and the epi cadmic by means of the neutron activation technique of thin sheets of gold. The maps of the distribution of the neutron flux for both energy groups in three different positions inside the 'Hohlraum' are presented, these maps were obtained by means of the irradiation of undressed thin activation sheets of gold and covered with cadmium in arrangements of 10 x 12, located parallel to 11.5 cm, 40.5 cm and 70.5 cm to the internal wall of graphite of the installation in inverse address to the position of the reactor core. Starting from the obtained values of neutron flux it was found that, for the same position of the surface of irradiation of the experimental arrangement, the relative differences among the values of neutron flux can be of 80%, and that the differences among different positions of the irradiation surfaces can vary until in a one order of magnitude. (Author)

  1. Material characterization and evaluation of Fyrquel effect on the metal part of filters in a system EHC; Caracterizacion del material y evaluacion del efecto del Fyrquel en la parte metalica de filtros en un sistema EHC

    Energy Technology Data Exchange (ETDEWEB)

    Diaz S, A.; Zenteno S, J.; Robles P, E.; Contreras R, A.; Arganis J, C. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Griz C, M., E-mail: angeles.diaz@inin.gob.mx [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Carretera Cardel-Nautla Km. 42.5, Veracruz (Mexico)

    2014-10-15

    In recent years, unexpected stoppages in power plants have been associated with problems in electro-hydraulic control systems (EHC) which generally operate with fluids to high pressure resistant to fire, but sensitive to the presence of water and contaminants that can promote damage and malfunction of government and discharge valves. The analysis here presented was performed to two filters prior to the servo valves of an EHC system that came out of service as a result of damage to these components. The study is based on analysis and inspection of metal and filter elements of these devices, integrating both chemical characterization by energy-dispersive X-ray spectroscopy of waste as materials that comprise both filters. The assessment made allowed documenting a poor design of the devices, same that promoted the stagnant fluid (Fyrquel), locally modifying the chemical composition of the medium, prompting the activation of auto-catalytic degradation processes that acidified the environment; the acid ph solutions began in susceptible sites of electrochemical corrosion processes which increased the Fyrquel contamination. (Author)

  2. Future control room design (modernization of control room systems)

    International Nuclear Information System (INIS)

    Reischl, Ludwig; Freitag, Timo; Dergel, Rene

    2009-01-01

    In the frame of lifetime extension for nuclear power plants the modernization of the complete safety and operational control technology will be digitalized. It is also recommended to modernize the operator facilities, monitoring systems in the control room, the back-up shut-down center and the local control stations. The authors summarize the reasons for the modernization recommendations and discuss possible solutions for display-oriented control rooms. A concept for control room backfitting includes generic requirements, requirements of the local authorities, ergonomic principles information content and information density, and the design process. The backfitting strategy should include a cooperation with the operational personnel, The quality assurance and training via simulator needs sufficient timing during the implementation of the backfitting.

  3. CARACTERIZACION DE LAS CONCEPCIONES SOBRE MEDIO AMBIENTE EN ESTUDIANTES Y PROFESORES DE UN PROGRAMA DE FORMACION INICIAL

    Directory of Open Access Journals (Sweden)

    Sergio Andres Yepes Conde

    2015-12-01

    Full Text Available El trabajo se desarrolla como una propuesta de modalidad de grado para obtener el título de Licenciatura en Ciencias Naturales: Física, Química y Biología en la Universidad Surcolombiana. Se aborda la investigación de las concepciones sobre medio ambiente en estudiantes de practica I, II y profesores de la Licenciatura en Ciencias Naturales, con el propósito de realizar una caracterización y proponer recomendaciones acerca de las concepciones que se presenta. Para lograrlo se proponen unas fases en la investigación, las cuales evidencian las diferentes etapas que se deben cumplir para la realización del trabajo y alcanzar el objetivo de caracterizar las concepciones sobre medio ambiente. El trabajo se hará tomando una población de aproximadamente 30 personas, las cuales comprenden estudiantes de práctica del periodo de estudio 2015-B, y los profesores de planta y catedráticos de la licenciatura.

  4. Characterization of AMC commercial bricks with different alumina qualities; Caracterizacion de ladrillos comerciales AMC con diferentes calidades de alumina

    Energy Technology Data Exchange (ETDEWEB)

    Muñoz, V.; Camerucci, Maria A.; Martinez, A.G. Tomba [Instituto de Investigaciones en Ciencia y Tecnologia de Materiales (INTEMA), CONICET - Fac. de Ingenieria (UNMdP), Mar del Plata (Argentina)

    2011-07-01

    The study of commercial bricks Al{sub 2}O{sub 3}-MgO-C (AMC) has some advantages over the analysis of materials prepared in the laboratory, but requires a complete characterization. This paper presents the results of the characterization of commercial bricks AMC with different types of alumina aggregates used in ladles floor. The same is done by several complementary techniques: XRD, DTA / TGA, EPR, volume density and apparent porosity, dilatometric analysis, microstructural analysis by low magnification and scanning electron microscopy (SEM) coupled with analysis Energy dispersive X-ray (EDX) and determination of mechanical properties at room temperature (Young's modulus, stress and strain at fracture). The main characteristics and differences in the composition and microstructure, essential data for further analysis of the mechanical behavior and resistance to slag attack of these refractories, are determined. (author)

  5. Las lenguas del Fuero juzgo: avatares históricos e historiográficos de las versiones romances de la Ley visigótica (I

    Directory of Open Access Journals (Sweden)

    Mónica Castillo Lluch

    2012-06-01

    Full Text Available Este trabajo revisa las caracterizaciones que se han dado de la lengua del Fuero juzgo en diferentes obras de la historia de la lengua española (manuales, ediciones y tratados dialectológicos, a la vez que explora cómo la representación histórica que se tiene del código legal ha podido trascender a su descripción lingüística. Se pone de manifiesto el desconocimiento casi absoluto de la historia del texto romance del Fuero juzgo y la necesidad para superarlo de una visión tanto individual de los distintos testimonios como del conjunto de su tradición manuscrita.Dans cette étude sont passées en revue les caractérisations de la langue du Fuero juzgo proposéesdans divers ouvrages sur l’histoire de la langue espagnole (manuels, éditions et traités dialectologiques. L’influence que la représentation historique du code légal a pu avoir sur sa description linguistique est également étudiée. L’accent est mis sur la méconnaissance presque complète de l’histoire du texte en langue vulgaire : pour y remédier, une étude de chacun des manuscrits conservés est nécessaire, mais il faut aussi parvenir à une vision d'ensemble de la tradition manuscrite.

  6. Revisiting the Operating Room Basics

    Directory of Open Access Journals (Sweden)

    Tushar Chakravorty

    2015-12-01

    Full Text Available Young doctors walking into the operating room are eager to develop their skills to become efficient and knowledgeable professionals in future. But precious little is done to actively develop the basic practical skills of the budding doctors. They remain unaware about the layout of the operating room, the OR etiquette and often do not have sound scientific understanding and importance of meticulous execution of the basic operating room protocols. This article stresses the need to develop the basics of OR protocol and to improve the confidence of the young doctor by strengthening his foundation by showing him that attention to the basics of medical care and empathy for the patient can really make a difference to the outcome of a treatment.

  7. Control room and ergonomic design

    International Nuclear Information System (INIS)

    Hinz, W.

    1984-01-01

    The important basis for the configuration of the control room of a nuclear power station is the concept for controlling a fault and that for controlling normal operation. The tasks resulting from this for the control room personnel are decided by the control room concept. In this configuration process (from the division of process control tasks between the system components operators and control technology to the configuration of individual means of operation) the characteristics and capabilities of the personnel, which are subject to special requirements as regards their qualifications, are observed. New concepts which are only now technically feasible are therefore being developed for information processing and display, in order to give the personnel a better oversight of the state and trends of the plant. (orig./DG) [de

  8. Aspectos epidemiológicos del síndrome de Burnout en personal sanitario

    Directory of Open Access Journals (Sweden)

    Atance Martínez Juan Carlos

    1997-01-01

    Full Text Available FUNDAMENTOS: El Síndrome Burnout se invoca como probable responsable de la desmotivación que sufren los profesionales sanitarios actualmente. Esto sugiere la posibilidad de que este síndrome esté implicado en las elevadas tasas de absentismo laboral que presentan estos profesionales. El estudio pretende aportar una serie de caracterizaciones de las variables epidemiológicas universales que permitan una aproximación al perfil de riesgo en esta profesión. MÉTODO: Estudiamos una muestra de 294 profesionales de atención primaria y atención especializada aleatoriamente. a los que se les aplicó el instrumento de medida del Síndrome de Burnout (Maslach Burnout Inventory de forma autoadministrada. Se hizo estadística descriptiva con comparación de medias para variables sociodemográficas (P< 0,05 con Epiinfo V.60 y SPSS PC.W. RESULTADOS: Obtuvimos 87,76% de respuestas frente al 12,23% de pérdidas. Esta muestra nos permite una confianza del 95% y un error del 5%. Obtuvimos diferencias significativas en función del sexo, edad, estado civil, antigüedad en la profesión en el centro de trabajo, número de trabajadores en el centro, lugar de trabajo, número de enfermos a cargo, horas de trabajo semanales, tiempo de interacción con los pacientes. La media de presencia del síndrome de Burnout fue 47,16 + 7.93, siendo las mayores proporciones las consignadas para las dimensiones cansancio emocional y falta de realización. CONCLUSIONES: El perfil epidemiológico de riesgo obtenido sería: mujer de más de 44 años sin pareja estable, con más de 19 años de antigüedad en la profesión y más de 11 en el centro, profesional de atención especializada, con más de 21 pacientes diarios a su cargo, a los que dedica más del 70% de la jornada laboral y a ésta entre 36 y 40 horas semanales.

  9. Creating Engaging Escape Rooms for the Classroom

    Science.gov (United States)

    Nicholson, Scott

    2018-01-01

    Escape rooms are "live-action team-based games where players discover clues, solve puzzles, and accomplish tasks in one or more rooms in order to accomplish a specific goal (usually escaping from the room) in a limited amount of time." Escape Rooms are one type of Escape Game, which are narrative-based challenges that use puzzles, tasks,…

  10. Organisation of roentgenofluorographic room functioning

    International Nuclear Information System (INIS)

    Yukelis, L.I.; Fejgin, M.I.

    1988-01-01

    Stationary and transportable roentgenofluorographic rooms as forms of using special roentgenodiagnostic equipment being parts of radiographic departments of therapeutic-preventive institutions are considered. Special attention is paid to operation of physicians and roentgenolaboratory worker, arrangement and carrying out roentgenodiagnostic part of work as well as interactions with the system of prescription for examination

  11. Room temperature ferromagnetic and photoluminescence ...

    Indian Academy of Sciences (India)

    32

    electrode, photo electronic devices, photo sensors, liquid crystal displays, electrochromic windows, solar panels and transparent coatings for solar-energy heat mirrors [11-13]. Here we report on magnetic properties of ITO nanoparticles at room temperature and at 100 K. 2. Experimental. The In1.9Sn0.1O3 powder samples ...

  12. New Radiation Protection training room

    CERN Multimedia

    HSE Unit

    2013-01-01

    From now on, the theory and practical components of the Radiation Protection training, developed by the RP Group and offered by the HSE Unit’s Safety Training team to people working in a Controlled Radiation Area, will take place in a dedicated teaching room, designed specifically for this kind of training.   The new room is in the Safety Training Centre on the Prévessin site and has been open since 16 October. It has an adjoining workshop that, like the room itself, can accommodate up to 12 people. It is also equipped with an interactive board as well as instruments and detectors to test for ionising radiation. This room is located near the recently inaugurated LHC tunnel mock-up where practical training exercises can be carried out in conditions almost identical to those in the real tunnel. To consult the safety training catalogue and/or sign up for Radiation Protection training, please go to: https://cta.cern.ch For further information, please contact the Safety Trainin...

  13. Room-Maid in Hotel

    Science.gov (United States)

    Hotel and Catering Industry Training Board, Wembley (England).

    This syllabus is intended for the use of training personnel in drawing up training programs for room-maids in hotels. Its main objective is to produce fully trained maids, thereby maintaining and raising standards. The syllabus is divided into three sections: Introducing to Housekeeping, Basic Tasks Performed by the Majority of Housekeeping…

  14. Hotels Make Room for Fitness.

    Science.gov (United States)

    Koszuta, Laurie Einstein

    1986-01-01

    Hotels, in hopes of gaining a competitive edge, are offering workout rooms, exercise equipment, fitness trails, and jogging tracks, but no standards have been set for safety of the facilities or staff preparedness in exercise screening, equipment use, injury prevention, or first aid. (MT)

  15. Nacionalismo, peronismo, comunismo: Los usos del totalitarismo en el discurso del Partido Socialista Argentino (1946-1953 Nacionalism, Peronism, Comunism: The uses of totalitarism in argentine Partido Socialista discourse (1946-1953

    Directory of Open Access Journals (Sweden)

    Ricardo Martínez Mazzola

    2011-06-01

    Full Text Available Este artículo explora la prensa y las producciones de los dirigentes del Partido Socialista argentino con el objeto de dar cuenta de una de las líneas principales de su prédica: la representada por los distintos usos del término "totalitarismo". Se reconstruye cómo el uso del discurso "antitotalitario" permitió a la dirigencia del partido no sólo condenar, por su asociación con las experiencias europeas, al régimen nacido de la revolución del '43 y al gobierno peronista, sino también cuestionar, por su cercanía con el peronismo, a los comunistas y a los miembros del ala izquierda del mismo Partido Socialista. El recorrido se cierra hacia comienzos de los años cincuenta, momento en que los intelectuales socialistas producen las más densas caracterizaciones del peronismo como fenómeno "totalitario", y justo antes de que la clave "anti-totalitaria" comience a ser cuestionada por la militancia socialista, en particular la juvenil.This article explores the press and the publications of the leaders of the argentine Socialist Party in an effort to account for one of the principal lines of its ideological message: the one represented by the different uses of the term "totalitarianism". It reconstructs the way in which the "anti-totalitarian" discourse allowed the party leadership not only to condemn the regime originated in the revolution which took place in 1943 and the Peronist government which emerged from it by associating both directly with contemporary European experiences, but also to challenge the Communists and left-wing members of the Socialist Party, because of their proximity to Peronism. This ideological itinerary was all but exhausted by the beginning of the '50s, when socialist intellectuals produced their densest characterizations of Peronism as a "totalitarian" phenomenon and just before the"anti-totalitarian" agenda began to be challenged, by grass-roots socialist militants, and particularly by the youth sector of the

  16. An Optimisation Approach for Room Acoustics Design

    DEFF Research Database (Denmark)

    Holm-Jørgensen, Kristian; Kirkegaard, Poul Henning; Andersen, Lars

    2005-01-01

    This paper discuss on a conceptual level the value of optimisation techniques in architectural acoustics room design from a practical point of view. It is chosen to optimise one objective room acoustics design criterium estimated from the sound field inside the room. The sound field is modeled...... using the boundary element method where absorption is incorporated. An example is given where the geometry of a room is defined by four design modes. The room geometry is optimised to get a uniform sound pressure....

  17. Enfermagem em centro cirúrgico: trinta anos após criação do Sistema de Assistência de Enfermagem Perioperatória Enfermería en centro quirúrgico: treinta años después de la creación del Sistema de Asistencia de Enfermería Perioperatoria Operation room nursing in Brazil: thirty years after the Institution of Perioperative Nursing Process

    Directory of Open Access Journals (Sweden)

    Rosa Maria Pelegrini Fonseca

    2009-01-01

    mejor calidad posible. Se confirmó la importancia de la asistencia humanizada e individualizada. CONCLUSIÓN: Las investigaciones analizadas contribuyen a la construcción del conocimiento e influyen positivamente en el enfermero para el buen desempeño en la asistencia al paciente quirúrgico y familia.OBJECTIVE: To identify, review, and describe publications of Brazilian operation room nurses. METHODS: An integrated review approach was used to summarize main aspects of research articles on operation room nursing published in Brazilian journals indexed in LILACS, DEDALUS, and SciELO from 1978 through 2006. Fifty six research articles were retrieved and classified on the following six themes: preoperative visit, intraoperative care; postoperative recovery room care; postoperative visit; instrument development and validation, and perceptions of the patient. RESULTS: The research articles addressed issues that facilitated or impeded quality transoperative nursing care. Humanized and individualized transoperative care was found to be important. CONCLUSION: Findings from this review contribute to knowledge development and may influence quality transoperative nursing care to the patient and his or her family.

  18. Los cocodrilos de la Cuenca del Duero

    OpenAIRE

    Jiménez Fuentes, Emiliano; Martín de Jesús, Santiago; Mulas Alonso, Eugenia

    1987-01-01

    [ES]La sala de las tortugas de la Universidad de Salamanca, abre provisionalmente sus puertas con motivo del II Congreso Nacional de Herpetología, posee también una interesante muestra de cocodrilos fósiles, que suelen acompañar a los quelonios en casi todos los yacimientos del Terciario Inferior de la Cuenca del Duero. [EN]The turtle room at the University of Salamanca, opens its doors temporarily to mark the Second National Congress of Herpetology, also has an interesting collection of f...

  19. Anaerobic/aerobic treatment for the waste water from the Instituto de Investigaciones Electricas installations; Tratamiento anaerobio-aerobio de las aguas residuales de las instalaciones del IIE

    Energy Technology Data Exchange (ETDEWEB)

    Arvizu Fernandez, Jose Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    The waste water treatment plant of the Instituto de Investigaciones Electricas (IIE) is analyzed. This plant originally was a plant of the activated sludge type (aerobic development), process that consumes large amounts of energy and that produces residual sludge 5 or 6 times greater than the anaerobic processes. The methodology and the techniques utilized were base in the analysis of the existing plant introducing an anaerobic treatment and performing laboratory experimentation. The plant design parameters considered are described. The results show the benefits of treating by anaerobic means the waste waters since depuration are obtained on the order of 75%, as well as the reduction of resulting residual sludge and in energy consumption. A reduction of 60% to 70% can be attained if a combination of anaerobic and aerobic processes is utilized [Espanol] Se analiza la planta de tratamiento de aguas residuales del Instituto de Investigaciones Electricas (IIE). Esta planta era originalmente una planta de lodos activados (desarrollo aerobio), proceso que consume mucha energia y genera lodos residuales de 5 a 6 veces mas que los procesos anaerobios. La metodologia y las tecnicas utilizadas se basaron en el analisis de la planta de tratamiento existente en el IIE; en la caracterizacion residual del IIE; en la modificacion de la planta de tratamiento introduciendo un tratamiento anaerobio y efectuando experimentacion en laboratorio. Se describen los parametros de diseno de la planta considerados. Los resultados muestran los beneficios de tratar por medios anaerobios las aguas residuales ya que se obtienen depuraciones del orden del 75%, asi como la reduccion de lodos residuales resultantes y el consumo de energia, pueden reducirse de un 60% a un 70% si se utiliza la combinacion de los procesos anaerobios y aerobios

  20. Anaerobic/aerobic treatment for the waste water from the Instituto de Investigaciones Electricas installations; Tratamiento anaerobio-aerobio de las aguas residuales de las instalaciones del IIE

    Energy Technology Data Exchange (ETDEWEB)

    Arvizu Fernandez, Jose Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1997-12-31

    The waste water treatment plant of the Instituto de Investigaciones Electricas (IIE) is analyzed. This plant originally was a plant of the activated sludge type (aerobic development), process that consumes large amounts of energy and that produces residual sludge 5 or 6 times greater than the anaerobic processes. The methodology and the techniques utilized were base in the analysis of the existing plant introducing an anaerobic treatment and performing laboratory experimentation. The plant design parameters considered are described. The results show the benefits of treating by anaerobic means the waste waters since depuration are obtained on the order of 75%, as well as the reduction of resulting residual sludge and in energy consumption. A reduction of 60% to 70% can be attained if a combination of anaerobic and aerobic processes is utilized [Espanol] Se analiza la planta de tratamiento de aguas residuales del Instituto de Investigaciones Electricas (IIE). Esta planta era originalmente una planta de lodos activados (desarrollo aerobio), proceso que consume mucha energia y genera lodos residuales de 5 a 6 veces mas que los procesos anaerobios. La metodologia y las tecnicas utilizadas se basaron en el analisis de la planta de tratamiento existente en el IIE; en la caracterizacion residual del IIE; en la modificacion de la planta de tratamiento introduciendo un tratamiento anaerobio y efectuando experimentacion en laboratorio. Se describen los parametros de diseno de la planta considerados. Los resultados muestran los beneficios de tratar por medios anaerobios las aguas residuales ya que se obtienen depuraciones del orden del 75%, asi como la reduccion de lodos residuales resultantes y el consumo de energia, pueden reducirse de un 60% a un 70% si se utiliza la combinacion de los procesos anaerobios y aerobios

  1. At ISR Main Control Room

    CERN Multimedia

    1983-01-01

    After 13 years the exploitation of the Intersecting Storage Rings as a beam-beam collider went to an end. In this last year the demands were very exacting, both in terms of operating time and diversified running conditions (Annual Report 1983 p. 123). Before dismantelement the photographer made a last tour, see photos 8310889X --> 8310667X. This photo shows the Main Control Room.

  2. Potencial del Agua del suelo

    Directory of Open Access Journals (Sweden)

    Bustamante Heliodoro

    1986-12-01

    Full Text Available La energía potencial del agua presenta diferencias de un punto del suelo a otro; esas diferencias son las que originan el movimiento del agua de acuerdo a la tendencia universal de la materia en el sentido de moverse de donde la energía potencial es mayor a donde dicha energía es menor. En el suelo el agua en consecuencia se mueve hacia donde su energía decrece hasta lograr su estado de equilibrio. Se desprende entonces que la cantidad de energía potencial absoluta contenida en el agua, no es importante por sí misma, sino por su relación con la energía en diferentes lugares dentro del suelo. El concepto Potencial de agua del suelo es un criterio para esta energía.

  3. Novel room temperature ferromagnetic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Amita [KTH Royal Inst. of Technology, Stockholm (Sweden)

    2004-06-01

    Today's information world, bits of data are processed by semiconductor chips, and stored in the magnetic disk drives. But tomorrow's information technology may see magnetism (spin) and semiconductivity (charge) combined in one 'spintronic' device that exploits both charge and 'spin' to carry data (the best of two worlds). Spintronic devices such as spin valve transistors, spin light emitting diodes, non-volatile memory, logic devices, optical isolators and ultra-fast optical switches are some of the areas of interest for introducing the ferromagnetic properties at room temperature in a semiconductor to make it multifunctional. The potential advantages of such spintronic devices will be higher speed, greater efficiency, and better stability at a reduced power consumption. This Thesis contains two main topics: In-depth understanding of magnetism in Mn doped ZnO, and our search and identification of at least six new above room temperature ferromagnetic semiconductors. Both complex doped ZnO based new materials, as well as a number of nonoxides like phosphides, and sulfides suitably doped with Mn or Cu are shown to give rise to ferromagnetism above room temperature. Some of the highlights of this work are discovery of room temperature ferromagnetism in: (1) ZnO:Mn (paper in Nature Materials, Oct issue, 2003); (2) ZnO doped with Cu (containing no magnetic elements in it); (3) GaP doped with Cu (again containing no magnetic elements in it); (4) Enhancement of Magnetization by Cu co-doping in ZnO:Mn; (5) CdS doped with Mn, and a few others not reported in this thesis. We discuss in detail the first observation of ferromagnetism above room temperature in the form of powder, bulk pellets, in 2-3 mu-m thick transparent pulsed laser deposited films of the Mn (<4 at. percent) doped ZnO. High-resolution transmission electron microscopy (HRTEM) and electron energy loss spectroscopy (EELS) spectra recorded from 2 to 200nm areas showed homogeneous

  4. New thinking for the boiler room.

    Science.gov (United States)

    Rose, Wayne

    2008-09-01

    Wayne Rose, marketing manager at integrated plant room manufacturer Armstrong Integrated Systems, explains how increasing use of off-site manufacture, the latest 3D modelling technology, and advances in control technology, are revolutionising boiler room design and construction.

  5. Operating Room Utilization at Frederick Memorial Hospital

    National Research Council Canada - National Science Library

    Edwards, Jonathan A

    2007-01-01

    .... A logistical regression analysis was used to identify the impact of variables on operating room utilization rates and therefore help explain how or why some operating rooms incurred higher utilization rates than others...

  6. Recovery room nurses' knowledge regarding postoperative airway ...

    African Journals Online (AJOL)

    Adele

    room nurses in private hospitals in Northern Gauteng, South Af- rica, regarding ... room nurse' is used. The same principle applies when reference is made to the terms ... Ethical considerations. Written consent ..... Principles of CPR in theatre.

  7. Manufacturing of NAA laboratory clean room

    International Nuclear Information System (INIS)

    Suwoto; Hasibuan, Djaruddin

    2001-01-01

    The ''NAA laboratory clean room'' has been built in the Reactor Serba Guna G.A. Siwabessy building. The erection of ''AAN laboratory clean room'' doing by started of preparation of the ''manufacturing procedure'' refer to ''Design and manufacturing neutron activation analysis clean room laboratory''. Manufacturing process and erection doing refer to procedures makes. By providing of the ''AAN laboratory clean room'' can be cocluded that the research activity and the user sevises in P2TRR well meet to be done

  8. 7 CFR 58.312 - Churn rooms.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Churn rooms. 58.312 Section 58.312 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....312 Churn rooms. Churn rooms in addition to proper construction and sanitation shall be so equipped...

  9. 32 CFR 518.9 - Reading room.

    Science.gov (United States)

    2010-07-01

    ... RELATIONS THE FREEDOM OF INFORMATION ACT PROGRAM FOIA Reading Rooms § 518.9 Reading room. (a) Reading room... clearly unwarranted invasions of privacy, or competitive harm to business submitters. In appropriate cases... information concerning munitions, equipment, systems, and intelligence activities. (4) (a)(2)(D) records...

  10. Auditory modelling for assessing room acoustics

    NARCIS (Netherlands)

    Van Dorp Schuitman, J.

    2011-01-01

    The acoustics of a concert hall, or any other room, are generally assessed by measuring room impulse responses for one or multiple source and receiver location(s). From these responses, objective parameters can be determined that should be related to various perceptual attributes of room acoustics.

  11. An open room for interpretation

    DEFF Research Database (Denmark)

    Tofte-Hansen, Inge

    2015-01-01

    Based on a concept that I have developed, which is called: "An open room for interpretation", the following article states that creative work and aesthetic expression in a pedagogical context with 2-6 years old children must give space for the children's own expressions. To teach music should...... not only be seen as a learning task where initiative and product is defined by the teacher. In contrast, I suggest that creative activities and aesthetic processes must be seen as an interaction between children's immediate physicality and curiosity and the teacher's musical skills and abilities to follow...

  12. Flow in air conditioned rooms

    DEFF Research Database (Denmark)

    Nielsen, Peter V.

    1974-01-01

    Flow in air conditioned r ooms is examined by means of model experiments . The different gearnetries giving unsteady, steady three- dimensional and steady twodimensional flow are determined . Velacity profiles and temperature profiles are measured in some of the geometries. A numerical solution...... of the flow equations is demonstrated and the flow in air conditioned rooms in case of steady two dimensional flow is predi cted. Compari son with measured results is shown i n the case of small Archimedes numbers, and predictions are shown at high Archimedes numbers. A numerical prediction of f low and heat...

  13. Ergonomics and control room design

    International Nuclear Information System (INIS)

    Williams, J.C.; Story, D.T.

    1987-01-01

    The application of ergonomic principles to the design process and some aspects of the Sizewell B control room is discussed. Also outlined is the management process which ensures that these principles are applied systematically throughout the design development activity and highlights the functional requirements which must also be met in the creation of a total man-machine system package which meets all the technical design criteria. The ergonomics requirements are part of this process and extend into all aspects of design ranging from such matters as workplace organization to environmental factors, social engineering, communications and aesthetics. (author)

  14. Guidelines for control room design reviews

    International Nuclear Information System (INIS)

    1981-09-01

    The control room design review is part of a broad program being undertaken by the nuclear industry and the government to ensure consideration of human factors in nuclear power plant design and operation. The purpose of the control room design review described by these guidelines is to (1) review and evaluate the control room workspace, instrumentation, controls, and other equipment from a human factors engineering point of view that takes into account both system demands and operator capabilities; and (2) to identify, assess, and implement control room design modifications that correct inadequate or unsuitable items. The scope of the control room design review described by these guidelines covers the human engineering review of completed control rooms; i.e., operational control rooms or those at that stage of the licensing process where control room design and equipment selection are committed. These guidelines should also be of use during the design process for new control rooms. However, additional analyses to optimize the allocation of functions to man and machine, and further examination of advanced control system technology, are recommended for new control rooms. Guidelines and references for comprehensive system analyses designed to incorporate human factors considerations into the design and development of new control rooms are presented in Appendix B. Where possible, a generic approach to the control room design review process is encouraged; for example, when control room designs are replicated wholly or in part in two or more units. Even when designs are not replicated exactly, generic reviews which can be modified to account for specific differences in particular control rooms should be considered. Industry organizations and owners groups are encouraged to coordinate joint efforts and share data to develop generic approaches to the design review process. The control room design review should accomplish the following specific objectives. To determine

  15. del alcoholismo

    Directory of Open Access Journals (Sweden)

    Rodrigo Arias Duque

    2005-01-01

    Full Text Available Desde el punto de vista farmacológico, es importante comprender qué es el alcohol y cómo actúa en el organismo. No existe una causa simple, sino una interacción complicada de factores neuroquímicos, fisiológicos, psicológicos y sociales que originan y desarrollan esta grave enfermedad fármaco-dependiente. La acción psicofisiológica y farmacodinámica del alcohol es fundamentalmente depresiva, por la reducción de la transmisión sináptica en el sistema nervioso humano. Es un hecho conocido que el consumo excesivo de alcohol causa una disfunción aguda y crónica del cerebro, produciendo trastornos en el sistema nervioso central, presentando alteraciones en la memoria y en las funciones intelectuales como cálculo, comprensión y aprendizaje. A nivel hepático tiene lugar, en su mayoría, el metabolismo del alcohol, produciéndose un hígado graso alcohólico, aumentando el tamaño, terminando en necrosis e inflamación grave del hígado; esto se llama hepatitis alcohólica, y si se sigue consumiendo alcohol se desarrollará la cirrosis. El alcohol también ha estado relacionado con alteraciones del miocardio; se ha constatado en animales de experimentación sanos que tanto la velocidad de contracción del músculo cardiaco y su máxima tensión disminuyen en presencia del alcohol, como consecuencia, la fuerza de cada contracción y el aumento de presión en el ventrículo izquierdo son menores, perdiendo eficacia el corazón como bomba.

  16. Room temperature cryogenic test interface

    International Nuclear Information System (INIS)

    Faris, S. M.; Davidson, A.; Moskowitz, P. A.; Sai-Halasz, G. A.

    1985-01-01

    This interface permits the testing of high speed semiconductor devices (room-temperature chips) by a Josephson junction sampling device (cryogenic chip) without intolerable loss of resolution. The interface comprises a quartz pass-through plug which includes a planar transmission line interconnecting a first chip station, where the cryogenic chip is mounted, and a second chip station, where the semiconductor chip to be tested is temporarily mounted. The pass-through plug has a cemented long half-cylindrical portion and short half-cylindrical portion. The long portion carries the planar transmission line, the ends of which form the first and second chip mounting stations. The short portion completes the cylinder with the long portion for part of its length, where a seal can be achieved, but does not extend over the chip mounting stations. Sealing is by epoxy cement. The pass-through plug is sealed in place in a flange mounted to the chamber wall. The first chip station, with the cryogenic chip attached, extends into the liquid helium reservoir. The second chip station is in the room temperature environment required for semiconductor operation. Proper semiconductor operating temperature is achieved by a heater wire and control thermocouple in the vicinity of each other and the second chip mounting station. Thermal isolation is maintained by vacuum and seals. Connections for power and control, for test result signals, for temperature control and heating, and for vacuum complete the test apparatus

  17. Web based emergency room PACS

    International Nuclear Information System (INIS)

    Cha, Soon Joo; Cheon, Yong Kyung; Choi, Sung Woo Kim

    2005-01-01

    We wished to develop the web based Picture Archiving and Communication System in the emergency room for early decision making in emergency treatment planning at a full PACS Hospital. The program tools were Microsoft Visual Studio 6.0 - Visual C++ 6.0, and the Microsoft SQL 7.0 under the Microsoft Windows 2000 server operation system. The achievement of images was performed by an auto transport program installed in the ER and the radiology department. The average compression rates were 5:1 for CT and MR, and 20:1 for CR with JPEG 2000 lossy compression. All the images were stored on hard disk for 3 months. The patients' information was displayed for 2 weeks for reducing the security risk. For interdepartmental consultation, patient query by patient hospital number was available. Our Web based ER PACS could be useful system for early decision making for treatment planning in the emergency room because it reduces the risk factors for the security of the Web Paces by using a system independent from PACS in the hospital and minimizing the information patients

  18. Room design in dental radiology

    International Nuclear Information System (INIS)

    Achalli, Sonika

    2013-01-01

    Radiography and radiographic examination of the patient form most valuable diagnostic tool in providing comprehensive dental care. The safe and effective use of the X-ray equipment is important for the protection of the patient, other members of the public and all members of the dental team. For patients, the risk that is associated with exposure to X-rays must always be weighed against the clinical benefit of an accurate diagnosis. The risks associated with the exposure to the X-rays during the radiographic examination of the patient must be minimised by meticulously adhering to good practice and thus carefully managing the use of dental radiological procedures. The dentist or the personnel who is the license holder for the X-ray equipment is ultimately responsible for the radiation safety at the workplace. One important method in limiting the possible risk of radiation exposure at workplace is the correct design of an X-ray room. This paper is aimed at discussing the guidelines and recommendations on X-ray room designs in dental radiology in order to facilitate radiation control and safe working conditions for radiation workers as well as the public. (author)

  19. Web based emergency room PACS

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Soon Joo; Cheon, Yong Kyung; Choi, Sung Woo Kim [Ilsan Paik Hospital, Inje University, Seoul (Korea, Republic of)] (and others)

    2005-07-15

    We wished to develop the web based Picture Archiving and Communication System in the emergency room for early decision making in emergency treatment planning at a full PACS Hospital. The program tools were Microsoft Visual Studio 6.0 - Visual C++ 6.0, and the Microsoft SQL 7.0 under the Microsoft Windows 2000 server operation system. The achievement of images was performed by an auto transport program installed in the ER and the radiology department. The average compression rates were 5:1 for CT and MR, and 20:1 for CR with JPEG 2000 lossy compression. All the images were stored on hard disk for 3 months. The patients' information was displayed for 2 weeks for reducing the security risk. For interdepartmental consultation, patient query by patient hospital number was available. Our Web based ER PACS could be useful system for early decision making for treatment planning in the emergency room because it reduces the risk factors for the security of the Web Paces by using a system independent from PACS in the hospital and minimizing the information patients.

  20. Characterization program, management and isotopic inventory calculation, radiological and fuel thermal irradiated in nuclear power Cofrentes; Programa Caracterizacion Gestion y calculo del inventario isotopico, radiologico y termico del combustible irradiado en la Central Nuclear de Cofrentes

    Energy Technology Data Exchange (ETDEWEB)

    Albendea, M.; Diego, J. L. de; Urrea, M.

    2012-07-01

    Characterization is a very detailed and user-friendly program takes into account the history of irradiation individualized and real all the fuel, even taking into account the interim periods are periods of discharge and recharge cycles and which have not been used.

  1. Characterization of surface hardening in a nitrated chromium steel by microwave plasma type ECR (Electron Cyclotron Resonance); Caracterizacion del endurecimiento superficial del acero H-12 nitrurado con plasma de microondas tipo ECR

    Energy Technology Data Exchange (ETDEWEB)

    La O C, G de

    1996-12-31

    With this work it is demonstrated the possibility of performing the nitriding process by using a CVD-ECR source, based on the results obtained after treating several samples of AISI H-12 steel. Also, the main operating parameters (time of treatment, sample temperatures and gas mixture) are determined during nitriding of this steel with the mentioned source. Samples used before nitriding were quenched and tempered at 580 Centigrade degrees. Several experiments were done by using a pure nitrogen plasma with exposure times of the samples of 20 minutes at temperatures from 450 to 550 Centigrade degrees, and by using a N{sub 2} - H{sub 2} plasma with exposure times of the samples of 20, 30 and 40 minutes at temperatures from 350 to 550 Centigrade degrees. Metallography, microhardness, EDS and Auger analysis were done to observe changes suffered for the samples after treatment. (Author).

  2. Characterization and linear array LA48 Commissioner for measuring the position of the multi leaf collimator; Caracterizacion y comisionado del linear array LA48 para medir el posicionamiento del colimador multilaminas

    Energy Technology Data Exchange (ETDEWEB)

    Conles Picos, I.; Cenizo de Castro, E.; Aparicio martin, A. R.; Barrio Lazo, F.; Cesteros Morante, M. J.

    2011-07-01

    The protocol of Quality Control of electron accelerators for medical use of SEFM proposed for multi leaf collimation system (MLC) to verify the positioning of the blades connect. To do this you must find a system with sufficient accuracy and precision and, if possible, easy to assemble and offers real-time results. One of these teams is the Linear Array of PTW-Freiburg (LA48), which consists of a row of 47 ionization chambers, of 0008 cc and 8 mm apart from each other. In this paper, we describe our process of characterization and LA48 commissioner. (Author)

  3. Characterization of the neutron spectra at the final of the installations labyrinth with medical accelerators; Caracterizacion del espectro de neutrones al final del laberinto de instalaciones con aceleradores medicos

    Energy Technology Data Exchange (ETDEWEB)

    Carelli, J.; Cruzate, J.A.; Gregori, B.; Papadopulos, S.; Discacciatti, A. [Autoridad Reguladora Nuclear, Av. del Libertador 8250, Buenos Aires (Argentina)]. e-mail: jcarelli@cae.arn.gov.ar

    2006-07-01

    A linear electron accelerator for medical use is an equipment dedicated to the production of collimated beams of electrons and/or photons. In an accelerator of a bigger potential or equal to 6 MV, are produced neutrons starting from the reaction (gamma, n) due to the interaction of the photons with the materials that compose the headset and the target. In this work the theoretical and experimental studies carried out to characterize the neutron spectra to the exit of the labyrinth of three bunkers of different geometry with accelerators of 15 MV, with the purpose of evaluating the effective dose of the occupationally exposure personnel are presented. It was carried out the simulation of the neutron transport with the MCNPX code and the ENDF/B - VI library. With the objective of analyzing the variables that affect the spectral distribution the bunkers of two existent facilities in Argentina were modeled. It was considered a isotropic punctual source located in the supposed position of the target. The spectra of {sup 252} Cf and of Watt of 1.8 MeV of half energy were simulated. The election of the sources was based on published works that suppose initial neutron sources with half energy between 1.8 and 2.3 MeV for accelerators of 15 at 25 MV. Its were considered headsets of different dimensions, with and without phantom of water disperser in the patient's position and several field dimensions in the isocenter. The spectral distribution doesn't present significant differences in the different modeling situations. Its were carried out measurements, with the multisphere spectrometric system based on twelve polyethylene spheres and a spherical detector of {sup 3} He, to the exit of each one of the bunkers. It was carried out the convolution of the spectrum using the MXD{sub F}C33 code (of the UMG33 set), considering as initial spectrum that of the fission type (inverse of the energy). The obtained spectra and the environmental equivalent dose rate in each case are presented. Difference has been observed in the dose according to the size of the field in the isocenter. For example, in the more usual type of labyrinth (right angles, with door), in fields of 5 x 5 cm{sup 2} and 10 x 10 cm{sup 2} the dose results to be 2.5 turns superior to fields of 40 x 40cm{sup 2}. (Author)

  4. Characterization of the coal of the Cauca Valley in the Swallows sector, Cali Municipality; Caracterizacion de los carbones del Valle del Cauca en el Sector de Golondrinas, Municipio de Cali

    Energy Technology Data Exchange (ETDEWEB)

    Barros de Ferreira, Lucy; Garcia Gonzalez, Fabio; Saldarriaga Bermudez, Cesar

    1992-07-01

    The study of the geologic, physical-chemical and petrography characteristics of the coal of the Cauca valley, are indispensable for the knowledge of the Colombian coal. For technical and logistical reasons the sector Cerro Golondrinas was chosen, near to the Cali city, where were taken samplings in many mines realizing analysis and interpretation of the results. The importance of the development of the pacific region in the industrial aspect it is excellent. Therefore, the best knowledge in its energy resources is basic for an appropriate use. It was possible to determine the presence of bituminous coal high volatile A, with a heating, dry power free of ashy (slcz), around 8.000 calories for gram, also, a content average of 6% of hydrogen with a relationship H/C (slcz) near to 8 x 10{sup 2}, that which gives to these coal the possibility of being used in gasification processes and liquefaction. The mill index shows an average of 46 corresponding to the range of coal of the area that which means that in the mill they should be kept in mind the conditions that require fairly hard coal. Even when there was not a mathematical correlation of the mill index with the ashes, the variability and the quantity of these last it is also an important parameter to keep in mind in the preparation of the coal. The same composition of the ashes is also variable in the whole area: of 75 samples of analyzed ashes, 56% is classified as bituminous and 44%, as lignite, in most of them was a deposition factor (slagging) low and an fouling factor, also low, that which indicates that these ashes don't present problems of accumulation of deposits in the combustion processes. The temperature of initial deformation in reducing atmosphere (itr) it reveals the presence of two populations, one with the maximum between 1.100 and 1.200 Celsius Degree and another with the maximum, superior to 1.500 Celsius Degree, fact that should be kept in mind for the correct use of the coal. One can say that the coal of this area are not capable for the coke process, only some samples corresponding to the mines located in the lowest levels (1.270 m. of height), they could be used in mixtures. It is considered therefore that the quality of the coal of the Cauca valley, sector Cerro Golondrinas, is favorable for thermal uses. Is necessary to continue their study, mainly as for the evaluation of their reserves, with the purpose of obtaining a detailed knowledge of the multiple locations that they are presented toward the south of the city of Cali.

  5. Clean-room robot implementation

    International Nuclear Information System (INIS)

    Comeau, J.L.

    1982-01-01

    A robot has been incorporated in a clean room operation in which vacuum tube parts are cleaned just prior to final assembly with a 60 lb/in 2 blast of argon gas. The robot is programmed to pick up the parts, manipulate/rotate them as necessary in the jet pattern and deposit them in a tray precleaned by the robot. A carefully studied implementation plan was followed in the procurement, installation, modification and programming of the robot facility. An unusual configuration of one tube part required a unique gripper design. A study indicated that the tube parts processed by the robot are 12% cleaner than those manually cleaned by an experienced operator

  6. Improvement of main control room

    International Nuclear Information System (INIS)

    Chae, Sung Ki; Ham, Chang Sik; Kwon, Ki Chun

    1991-07-01

    Information display system, advanced alarm system and fiber optical communication system were developed to improve the main control room in nuclear power plant. Establishing the new hierachical information structure of plant operation data, plant overview status board(POSB) and digital indicator(DI) were designed and manufactured. The prototype advanced alarm system which employed the new alarm logics and algorithm compared with the conventional alarm system were developed and its effectiveness was proved. Optical communication system which has multi-drop feature and capability of upgrading to large-scale system by using BITBUS communication protocol which is proven technology, were developed. Reliability of that system was enhanced by using distributed control. (Author)

  7. Thermal plumes in ventilated rooms

    DEFF Research Database (Denmark)

    Kofoed, Peter; Nielsen, Peter V.

    1990-01-01

    The design of a displacement ventilation system involves determination of the flow rate in the thermal plumes. The flow rate in the plumes and the vertical temperature gradient influence each other, and they are influenced by many factors. This paper shows some descriptions of these effects. Free...... above a point heat source cannot be used. This is caused either by the way of generating the plume including a long intermediate region or by the environmental conditions where vertical temperature gradients are present. The flow has a larger angle of spread and the entrainment factor is greather than...... turbulent plumes from different heated bodies are investigated. The measurements have taken place in a full-scale test room where the vertical temperature gradient have been changed. The velocity and the temperature distribution in the plume are measured. Large scale plume axis wandering is taken...

  8. Room acoustics for the aged.

    Science.gov (United States)

    Plomp, R; Duquesnoy, A J

    1980-12-01

    This article deals with the combined effects of noise and reverberation on the speech-reception threshold for sentences. It is based on a series of current investigations on: (1) the modulation-transfer function as a measure of speech intelligibility in rooms, (2) the applicability of this concept to hearing-impaired persons, and (3) hearing loss for speech in quiet and in noise as a function of age. It is shown that, generally, in auditoria, classrooms, etc. the reverberation time T, acceptable for normal-hearing listeners, has to be reduced to (0.75)DT in order to be acceptable for elderly subjects with a hearing loss of D dB for speech in noise; for listening conditions as in lounges, restaurants, etc. the corresponding value is (0.82)DT.

  9. Shielded room measurements, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Stanton, J.S.

    1949-02-22

    The attenuation of electro-statically and electro-magnetically shielded rooms in the ``E,`` ``R,`` ``I,`` and ``T`` Buildings was measured so that corrective measure could be taken if the attenuation was found to be low. If remedial measures could not be taken, the shortcomings of the rooms would be known. Also, the men making the measurements should oversee construction and correct errors at the time. The work was performed by measuring the attenuation at spot frequencies over the range of from 150 kilocycles to 1280 megacycles with suitable equipment mounted in small rubber-tried trucks. The attenuation was determined by ``before and after`` shielding and/or ``door open and door closed`` measurements after installation of copper shielding. In general, attenuation in the frequency range of approximately 10 to 150 mc. was good and was of the order expected. At frequencies in the range of 150 mc. to 1280 mc., the attenuation curve was more erratic; that is, at certain frequencies a severe loss of attenuation was noted, while at others, the attenuation was very good. This was mainly due to poor or faulty seals around doors and pass windows. These poor seals existed in the ``T,`` ``E,`` and ``I`` Buildings because the doors were fitted improperly and somewhat inferior material was used. By experience from these difficulties, both causes were corrected in the ``R`` Building, which resulted in the improvement of the very high frequency (v.h.f.) range in this building. In some specific cases, however, the results were about the same. For the range of frequencies below approximately 10 mc., the attenuation, in almost all cases, gradually decreased as the frequency decreased and reached a minimum at .3 to 1.0 mc. This loss of attenuation was attributed to multiple grounding caused by moisture in the insulating timbers and will gradually decrease as the wood dries out.

  10. Culturas del Mundo

    DEFF Research Database (Denmark)

    Benwell, Ann Fenger; Costa, Alberto; Waehle, Espen

    2006-01-01

    ’Culturas del mundo. Colecciones del Museo Nacional de Dinamarca’ with Ann Fenger Benwell in Culturas del Mundo. Colecciones del Museo Nacional de Dinamarca, ed. Silvia Sauquet, Fundación "la Caixa", Barcelona 2006, pp. 31-39......’Culturas del mundo. Colecciones del Museo Nacional de Dinamarca’ with Ann Fenger Benwell in Culturas del Mundo. Colecciones del Museo Nacional de Dinamarca, ed. Silvia Sauquet, Fundación "la Caixa", Barcelona 2006, pp. 31-39...

  11. Caracterización de la actividad alergénica y enzimática de extractos somáticos producidos a partir de cultivos in vitro del ácaro Dermatophagoide farinae

    Directory of Open Access Journals (Sweden)

    Dary Luz Mendoza Meza

    2011-01-01

    Full Text Available Introduccion: El Dermatophagoides fainae (DF es un acaro cosmopolita presente en el polvo intradomiciliario. Este acaro es fuente importante de aereo-alergenos desencadenantes de asma y rinitis alergica. Objetivo: El proposito de este trabajo fue la produccion y caracterizacion de extractos alergenicos para uso en diagnostico alergologico y terapia. Metodos: Los extractos se prepararon a partir de cultivos puros in vitro de acaros. Las proteinas del acaro fueron extraidas mediante lisis osmotica. La concentracion de proteinas se determino por microensayo de Bradford y el perfil electroforetico fue identificado por SDS-PAGE. La actividad enzimatica fue evaluada con el estuche comercial Api Zym (Biomeriux R y la actividad alergenica por inmunoensayo de Dot Blot. Resultados: Se prepararon cinco lotes de extractos. La media del peso seco de material extraido fue 37,04 mg/gramo de acaros ( DE= 11,3 y la media de la cantidad de proteina fue 212,4 ¿Êg/mg de peso seco (DE= 33,3. El perfil SDS-PAGE mostro la presencia de 8 bandas comunes (21-109 kDa. Todos los extractos presentaron actividad enzimatica hidrolasa. Tambien se demostro actividad tripsina, alfa-amilasa y alfa-quimiotripsina, correspondientes a los alergenos de los acaros del grupo 3, 4 y 6 respectivamente. Todos los extractos tuvieron proteinas con capacidad de union a los anticuerpos IgE. Conclusion: Aqui presentamos la produccion de extractos del acaro DF, con actividad alergenica. Estos resultados fundamentaran la produccion a escala de extractos alergenicos de acaros desencadenantes de enfermedades alergicas en el humano, con fines diagnosticos y de aplicacion terapeutica.

  12. Chemical modeling of formation water of the active Luna, Tabasco; Modelacion quimica de aguas de formacion del activo Luna, Tabasco

    Energy Technology Data Exchange (ETDEWEB)

    Barragan R, Rosa M; Portugal M, Enrique; Arellano G, Victor M. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Martinez A, Ana E; Ascencio C, Fernando [Petroleos Mexicanos (Mexico)

    2001-07-01

    conjunto entre la GPP, el Activo de Produccion Luna de Pemex y la Gerencia de Geotermia del Instituto de Investigaciones Electricas, en 1997. Los objetivos del proyecto fueron: (a) muestreo y caracterizacion fisicoquimica de aguas de pozos petroleros pertenecientes al activo de Produccion Luna, y (b) modelacion del equilibrio quimico a condiciones de cabezal y de yacimiento para obtener indices de saturacion de minerales caracteristicos de sistemas hidrotermales, con el proposito de predecir las fases minerales que pueden encontrarse en incrustaciones superficiales y profundas.

  13. From Baltic rooms to conference rooms: my jouney with data

    Science.gov (United States)

    Kozlowski, W. A.

    2015-12-01

    From time spent in murky, mosquito-filled mangrove swamps searching for fiddler crabs, to being transported off ships in webbed "man-baskets" on inky-black winter mornings to sample sea ice, to teaching rooms full of students the benefits of information organization, the wonders of science have long shaped my career path. Regardless of surroundings, the driving factor has always been a desire to learn new skills, then try to figure out how to use them to make work easier or more efficient for myself and hopefully others. Somewhere along the way, I've switched from doing it primarily for my "own" research projects, to a focus on helping others with theirs. Like many in this field, my route to a career in data science has influenced how I do my work. Along the way I've carried skills with me but also learned a few things that have made my journey both practical and fun. In this presentation, I'll discuss a few key factors that contribute to my current efforts as a data curation specialist in a research library, including communication (translation of "library" concepts to "science" concepts and vice versa), flexibility (ability to accomodate ideas, pace and values of those I'm working with), and prioritization (learning to balance what's valuable to researchers with principles important to libraries, curators, repositories, archives and other groups with which I interact).

  14. Nuclear power station main control room habitability

    International Nuclear Information System (INIS)

    Paschal, W.B.; Knous, W.S.

    1989-01-01

    The main control room at a nuclear power station must remain habitable during a variety of plant conditions and postulated events. The control room habitability requirement and the function of the heating, ventilating, air-conditioning, and air treatment system are to control environmental factors, such as temperature, pressure, humidity, radiation, and toxic gas. Habitability requirements provide for the safety of personnel and enable operation of equipment required to function in the main control room. Habitability as an issue has been gaining prominence with the Advisor Committee of Reactor Safeguards and the Nuclear Regulatory Commission since the incident at Three Mile Island. Their concern is the ability of the presently installed habitability systems to control the main control room environment after an accident. This paper discusses main control room HVAC systems; the concern, requirements, and results of NRC surveys and notices; and an approach to control room habitability reviews

  15. Cultural differences in room size perception.

    Science.gov (United States)

    Saulton, Aurelie; Bülthoff, Heinrich H; de la Rosa, Stephan; Dodds, Trevor J

    2017-01-01

    Cultural differences in spatial perception have been little investigated, which gives rise to the impression that spatial cognitive processes might be universal. Contrary to this idea, we demonstrate cultural differences in spatial volume perception of computer generated rooms between Germans and South Koreans. We used a psychophysical task in which participants had to judge whether a rectangular room was larger or smaller than a square room of reference. We systematically varied the room rectangularity (depth to width aspect ratio) and the viewpoint (middle of the short wall vs. long wall) from which the room was viewed. South Koreans were significantly less biased by room rectangularity and viewpoint than their German counterparts. These results are in line with previous notions of general cognitive processing strategies being more context dependent in East Asian societies than Western ones. We point to the necessity of considering culturally-specific cognitive processing strategies in visual spatial cognition research.

  16. Cultural differences in room size perception.

    Directory of Open Access Journals (Sweden)

    Aurelie Saulton

    Full Text Available Cultural differences in spatial perception have been little investigated, which gives rise to the impression that spatial cognitive processes might be universal. Contrary to this idea, we demonstrate cultural differences in spatial volume perception of computer generated rooms between Germans and South Koreans. We used a psychophysical task in which participants had to judge whether a rectangular room was larger or smaller than a square room of reference. We systematically varied the room rectangularity (depth to width aspect ratio and the viewpoint (middle of the short wall vs. long wall from which the room was viewed. South Koreans were significantly less biased by room rectangularity and viewpoint than their German counterparts. These results are in line with previous notions of general cognitive processing strategies being more context dependent in East Asian societies than Western ones. We point to the necessity of considering culturally-specific cognitive processing strategies in visual spatial cognition research.

  17. Operating room management and operating room productivity: the case of Germany.

    Science.gov (United States)

    Berry, Maresi; Berry-Stölzle, Thomas; Schleppers, Alexander

    2008-09-01

    We examine operating room productivity on the example of hospitals in Germany with independent anesthesiology departments. Linked to anesthesiology group literature, we use the ln(Total Surgical Time/Total Anesthesiologists Salary) as a proxy for operating room productivity. We test the association between operating room productivity and different structural, organizational and management characteristics based on survey data from 87 hospitals. Our empirical analysis links improved operating room productivity to greater operating room capacity, appropriate scheduling behavior and management methods to realign interests. From this analysis, the enforcing jurisdiction and avoiding advance over-scheduling appear to be the implementable tools for improving operating room productivity.

  18. Control room habitability during severe accidents

    International Nuclear Information System (INIS)

    Siu, R.P.

    1989-01-01

    The requirements for protection of control room personnel against radiation hazards are specified in 10CFR50, Appendix A, GDC 19. The conventional approach involves a mechanistic evaluation of the radiation doses to control room personnel during design-basis accidents. In this study, an assessment of control room habitability during severe accidents is conducted. The potential levels of radiation hazards to control room personnel are evaluated in terms of both magnitude and probability of occurrence. The expected values for the probabilities of exceeding GDC-19 limits and the cumulative probability distributions of control room doses are determined. In this study, a pressurized water reactor with a large dry containment has been selected for analysis. The types of control rooms evaluated in this study include designs with: (a) filtered local intakes only, (b) filtered recirculation only, (c) filtered local intakes and recirculation, and (d) filtered dual remote intakes and recirculation. From the observations, it is concluded that, except for control room D, all other control room designs may require improvements in order to provide adequate radiation protection during severe accidents, particularly in terms of reducing whole-body gamma doses and skin doses. Potential design improvements include reduction of intake flows for concepts relying on pressurization, reduction in overall leakages, and control room pressurization through the use of bottled air supply

  19. Synthesis and electrochemical characterization of palladium-based cathode catalysts, resistant to the presence of methanol; Sintesis y caracterizacion electroquimica de catalizadores catodicos base paladio, resistentes a la presencia de metanol

    Energy Technology Data Exchange (ETDEWEB)

    Salvador, Jose J. [Centro de Investigacion y de Estudios Avanzados del IPN, Mexico D.F. (Mexico)] e-mail: jsalvador@cinvestav.mx; Collins, Virginia H. [Centro de Investigacion en Materiales Avanzados, Chihuahua, Chihuahua (Mexico); Solorza Feria, Omar [Centro de Investigacion y de Estudios Avanzados del IPN, Mexico D.F. (Mexico)

    2009-09-15

    This work presents the synthesis and characterization of palladium-based electrocatalysts (PdSn and PdPtSn) prepared with the salt-reduction method for oxygen reduction reaction (ORR). The compounds obtained are characterized by sweep electron microscopy, electron transmission microscopy and x-ray diffraction of powder. The electrocatalysts obtained had particle sizes less than 10 nm. The evaluation of the catalytic activity of the catalysts was performed using cyclic voltametry and rotating disc electrode. These experiments were conducted in an H{sub 2}SO{sub 4} 0.5 M solution with different methanol concentrations. The presence of methanol improved the catalytic activity of PdSn, but did not show any effect on the PdPtSn alloy. The performance of the DMFC mono cell using PdPtSn as a cathode showed a potential of 10 mW cm{sup -2} at 50 degrees Celsius. [Spanish] En este trabajo se presenta la sintesis y caracterizacion de electrocatalizadores de base Paladio (PdSn y PdPtSn) preparados mediante el metodo de reduccion de sales, para la reaccion de reduccion de oxigeno (RRO). Los compuestos obtenidos se caracterizaron por microscopia electronica de barrido, microscopia electronica de transmision y difraccion de rayos X de polvos. Los electrocatalizadores obtenidos presentaron un tamano de particula menores a 10 nm. La evaluacion de la actividad catalitica de los catalizadores se llevo a cabo mediante voltametria Ciclica y electrodo de disco rotatorio, estos experimentos fueron realizados en una solucion de H{sub 2}SO{sub 4} 0.5 M con diferentes concentraciones de metanol. La presencia de metanol mejoro la actividad catalitica de PdSn, pero no mostro ningun efecto sobre la aleacion PdPtSn. El desempeno de la monocelda de DMFC usando como catodo PdPtSn, mostro una potencia de 10 mW cm{sup -2} a 50 grados centigrados.

  20. [Management for the operating room].

    Science.gov (United States)

    Tschudi, O; Schüpfer, G

    2015-03-01

    Business companies, which in the current times also includes hospitals, must create customer benefits and as a prerequisite for this must sustainably generate profits. Management in the world of business means the formation and directing of a company or parts of a company on a permanent basis, whereby management in this context is not exercising power but function. This concept of management is exemplary developed in this article for the important services sector of the operating room (OR) and individual functions, such as resource control, capacity planning and materials administration are presented in detail. Some OR-specific management challenges are worked out. From this it becomes clear that the economic logic of the most efficient implementation possible is not a contradiction of medical ethics, enabling the most effective treatment possible for patients while safeguarding the highest possible levels of safety and quality. The article aims to build a bridge for medical specialists to the language and world of commerce, emphasizing the profession-based competence and hopefully to arouse interest to go into more detail.

  1. The collaborative tokamak control room

    International Nuclear Information System (INIS)

    Schissel, D.P.

    2006-01-01

    Magnetic fusion experiments keep growing in size and complexity resulting in a concurrent growth in collaborations between experimental sites and laboratories worldwide. In the US, the National Fusion Collaboratory Project is developing a persistent infrastructure to enable scientific collaboration for all aspects of magnetic fusion energy research by creating a robust, user-friendly collaborative environment and deploying this to the more than 1000 US fusion scientists in 40 institutions who perform magnetic fusion research. This paper reports on one aspect of the project which is the development of the collaborative tokamak control room to enhance both collocated and remote scientific participation in experimental operations. This work includes secured computational services that can be scheduled as required, the ability to rapidly compare experimental data with simulation results, a means to easily share individual results with the group by moving application windows to a shared display, and the ability for remote scientists to be fully engaged in experimental operations through shared audio, video, and applications. The project is funded by the USDOE Office of Science, Scientific Discovery through Advanced Computing (SciDAC) Program and unites fusion and computer science researchers to directly address these challenges

  2. Effect of Room Ventilation Rates in Rodent Rooms with Direct-Exhaust IVC Systems.

    Science.gov (United States)

    Geertsema, Roger S; Lindsell, Claire E

    2015-09-01

    When IVC are directly exhausted from a rodent housing room, the air quality of the room can become independent of the intracage air quality and may reduce the need for high room ventilation rates. This study assessed the effect of decreasing the ventilation rate in rodent rooms using direct-exhaust IVC systems. The study was conducted over 16 wk and compared conditions in 8 rodent rooms that had ventilation rates of 5 to 6 air changes per hour (ACH) with those in rooms at 10 to 12 ACH. At the low ventilation rate, rooms had higher CO₂ concentrations, higher dew point temperature, and lower particulate levels and spent a greater percentage of time above the temperature set point than did rooms at the high rate. The levels of allergens and endotoxins in room air were the same regardless of the ventilation rate. Differences seen in parameters within cages at the 2 ventilation rates were operationally irrelevant. We detected no total volatile organic compounds in the room that were attributable to ammonia, regardless of the ventilation rate. Clearing the air of ethanol after a spill took longer at the low compared with high rate. However, ethanol clearance was faster at the low rate when the demand-control system was activated than at the high ventilation rate alone. Air quality in the room and in the cages were acceptable with room ventilation rates of 5 to 6 ACH in rodent rooms that use direct-exhaust IVC systems.

  3. Reliability of estimating the room volume from a single room impulse response

    OpenAIRE

    Kuster, M.

    2008-01-01

    The methods investigated for the room volume estimation are based on geometrical acoustics, eigenmode, and diffuse field models and no data other than the room impulse response are available. The measurements include several receiver positions in a total of 12 rooms of vastly different sizes and acoustic characteristics. The limitations in identifying the pivotal specular reflections of the geometrical acoustics model in measured room impulse responses are examined both theoretically and expe...

  4. Advanced control room caters for the operator

    International Nuclear Information System (INIS)

    George, C.R.; Rygg, D.E.

    1980-01-01

    In existing control rooms the operators' efficiency is often limited by widely scattered and sometimes illogically arranged controls which tend to increase the potential for outages or equipment damage. The advanced control room described allows instant and ready access to preselected information and control by one or two operators from a seated or standing position. (author)

  5. Fast rendering of scanned room geometries

    DEFF Research Database (Denmark)

    Olesen, Søren Krarup; Markovic, Milos; Hammershøi, Dorte

    2014-01-01

    Room acoustics are rendered in Virtual Realities based on models of the real world. These are typically rather coarse representations of the true geometry resulting in room impulse responses with a lack of natural detail. This problem can be overcome by using data scanned by sensors, such as e...

  6. VRML Programs for Room Ventilation Applications

    DEFF Research Database (Denmark)

    Nielsen, Anker

    Cheap 3D models for visualization of room ventilation applications are now available. VRML (Virtu~l Reality Modelling Language) is found to be a good format to describe buildings, rooms and furniture. A 3D model in VRML can be placed on a World Wide Web (www) page and others can see the model...

  7. The Western Primary School 'Quiet Room' Project.

    Science.gov (United States)

    King, Angus; Chantler, Zara

    2002-01-01

    This article describes a "Quiet Room" project for students with social, emotional, and behavioral problems at a British primary school. The Quiet Room was designed to provide a nurturing environment away from the classroom in which a child's emotional needs can be explored on a one-to-one basis. Benefits for children, parents, and…

  8. The Ethics of the Collegiate Locker Room

    Science.gov (United States)

    Roper, Larry D.

    2017-01-01

    Locker rooms are a fixture in the athletic culture of colleges and universities. Given the important roles those spaces play in the learning, growth, and development of student-athletes, collegiate leaders should consider how to influence locker room environments in positive ways.

  9. RLA room 20 cleanout and stabilization

    International Nuclear Information System (INIS)

    Ham, J.E.

    1997-01-01

    This engineering report documents the decontamination and stabilization of the Rupture Loop Annex located in room 20 of the 309 building's Plutonium Recycle Test Reactor. Low level, mixed, and recyclable waste was removed from the room. Smearable contamination was removed and/or fixed in place with paint. The RLA was cleaned out and stabilized to meet the Environmental Restoration Contractor's turnover criteria

  10. High Efficiency Room Air Conditioner

    Energy Technology Data Exchange (ETDEWEB)

    Bansal, Pradeep [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-01-01

    This project was undertaken as a CRADA project between UT-Battelle and Geberal Electric Company and was funded by Department of Energy to design and develop of a high efficiency room air conditioner. A number of novel elements were investigated to improve the energy efficiency of a state-of-the-art WAC with base capacity of 10,000 BTU/h. One of the major modifications was made by downgrading its capacity from 10,000 BTU/hr to 8,000 BTU/hr by replacing the original compressor with a lower capacity (8,000 BTU/hr) but high efficiency compressor having an EER of 9.7 as compared with 9.3 of the original compressor. However, all heat exchangers from the original unit were retained to provide higher EER. The other subsequent major modifications included- (i) the AC fan motor was replaced by a brushless high efficiency ECM motor along with its fan housing, (ii) the capillary tube was replaced with a needle valve to better control the refrigerant flow and refrigerant set points, and (iii) the unit was tested with a drop-in environmentally friendly binary mixture of R32 (90% molar concentration)/R125 (10% molar concentration). The WAC was tested in the environmental chambers at ORNL as per the design rating conditions of AHAM/ASHRAE (Outdoor- 95F and 40%RH, Indoor- 80F, 51.5%RH). All these modifications resulted in enhancing the EER of the WAC by up to 25%.

  11. Ergonomics in the operating room.

    Science.gov (United States)

    Janki, Shiromani; Mulder, Evalyn E A P; IJzermans, Jan N M; Tran, T C Khe

    2017-06-01

    Since the introduction of minimally invasive surgery, surgeons appear to be experiencing more occupational musculoskeletal injuries. The aim of this study is to investigate the current frequency and effects of occupational musculoskeletal injuries on work absence. An online questionnaire was conducted among all surgeons affiliated to the Dutch Society for Endoscopic Surgery, Gastrointestinal Surgery, and Surgical Oncology. In addition, this survey was conducted among surgeons, gynaecologists, and urologists of one cluster of training hospitals in the Netherlands. There were 127 respondents. Fifty-six surgeons currently suffer from musculoskeletal complaints, and 30 have previously suffered from musculoskeletal complaints with no current complaints. Frequently reported localizations were the neck (39.5 %), the erector spinae muscle (34.9 %), and the right deltoid muscle (18.6 %). Most of the musculoskeletal complaints were present while operating (41.8 %). Currently, 37.5 % uses medication and/or therapy to reduce complaints. Of surgeons with past complaints, 26.7 % required work leave and 40.0 % made intraoperative adjustments. More surgeons with a medical history of musculoskeletal complaints have current complaints (OR 6.1, 95 % CI 1.9-19.6). There were no significant differences between surgeons of different operating techniques in localizations and frequency of complaints, or work leave. Despite previous various ergonomic recommendations in the operating room, the current study demonstrated that musculoskeletal complaints and subsequent work absence are still present among surgeons, especially among surgeons with a positive medical history for musculoskeletal complaints. Even sick leave was necessary to fully recover. There were no significant differences in reported complaints between surgeons of different operating techniques. Almost half of the respondents with complaints made intraoperative ergonomic adjustments to prevent future complaints. The

  12. Clean industrial room for drift tube assembling

    International Nuclear Information System (INIS)

    Glonti, G.L.; Gongadze, A.L.; Evtukhovich, P.G.

    2001-01-01

    Description of a clean industrial room for assembly of drift tubes for the muon spectrometer of the ATLAS experiment is presented. High quality specifications on the detectors to be produced demanded creation of a workplace with stable temperature and humidity, as well as minimum quantity of dust in the room. Checking of parameters of intra-room air during long period of continuous work has confirmed correctness of the designed characteristics of the climatic system installed in the clean room. The room large volume (∼ 190 m 3 ), the powerful and flexible climatic system, and simplicity of service allow assembling of detectors with length up to 5 m. Subsequent checking of functionality of the assembled detectors has shown high quality of assembling (the amount of rejected tubes does not exceed 2%). It demonstrates conformity to the assembling quality requirements for mass production of drift chambers for the muon spectrometer. (author)

  13. Clean Industrial Room for Drift Tube Assembling

    CERN Document Server

    Glonti, GL; Evtoukhovitch, P G; Kroa, G; Manz, A; Potrap, I N; Rihter, P; Stoletov, G D; Tskhadadze, E G; Chepurnov, V F; Chirkov, A V; Shelkov, G A

    2001-01-01

    Description of a clean industrial room for assembly of drift tubes for the muon spectrometer of the ATLAS experiment is presented. High quality specifications on the detectors to be produced demanded creation of a workplace with stable temperature and humidity, as well as minimum quantity of dust in the room. Checking of parameters of intra-room air during long period of continuous work has been confirmed correctness of the designed characteristics of the climatic system installed in the clean room. The room large volum (\\sim 190 m^3), the powerful and flexible climatic system, and simplicity of service allow assembling of detectors with length up to 5 m. Subsequent checking of functionality of the assembled detectors has shown high quality of assembling (the amount of rejected tubes does not exceed 2 %). It demonstrates conformity to the assembling quality requirements for mass production of drift chambers for the muon spectrometer.

  14. Perceptual effects in auralization of virtual rooms

    Science.gov (United States)

    Kleiner, Mendel; Larsson, Pontus; Vastfjall, Daniel; Torres, Rendell R.

    2002-05-01

    By using various types of binaural simulation (or ``auralization'') of physical environments, it is now possible to study basic perceptual issues relevant to room acoustics, as well to simulate the acoustic conditions found in concert halls and other auditoria. Binaural simulation of physical spaces in general is also important to virtual reality systems. This presentation will begin with an overview of the issues encountered in the auralization of room and other environments. We will then discuss the influence of various approximations in room modeling, in particular, edge- and surface scattering, on the perceived room response. Finally, we will discuss cross-modal effects, such as the influence of visual cues on the perception of auditory cues, and the influence of cross-modal effects on the judgement of ``perceived presence'' and the rating of room acoustic quality.

  15. Operating room fires in periocular surgery.

    Science.gov (United States)

    Connor, Michael A; Menke, Anne M; Vrcek, Ivan; Shore, John W

    2018-06-01

    A survey of ophthalmic plastic and reconstructive surgeons as well as seven-year data regarding claims made to the Ophthalmic Mutual Insurance Company (OMIC) is used to discuss operating room fires in periocular surgery. A retrospective review of all closed claim operating room fires submitted to OMIC was performed. A survey soliciting personal experiences with operating room fires was distributed to all American Society of Oculoplastic and Reconstructive Surgeons. Over the last 2 decades, OMIC managed 7 lawsuits resulting from an operating room fire during periocular surgery. The mean settlement per lawsuit was $145,285 (range $10,000-474,994). All six patients suffered burns to the face, and three required admission to a burn unit. One hundred and sixty-eight surgeons participated in the online survey. Approximately 44% of survey respondents have experienced at least one operating room fire. Supplemental oxygen was administered in 88% of these cases. Most surgical fires reported occurred in a hospital-based operating room (59%) under monitored anesthesia care (79%). Monopolar cautery (41%) and thermal, high-temperature cautery (41%) were most commonly reported as the inciting agents. Almost half of the patients involved in a surgical fire experienced a complication from the fire (48%). Sixty-nine percent of hospital operating rooms and 66% of ambulatory surgery centers maintain an operating room fire prevention policy. An intraoperative fire can be costly for both the patient and the surgeon. Ophthalmic surgeons operate in an oxygen rich and therefore flammable environment. Proactive measures can be undertaken to reduce the incidence of surgical fires periocular surgery; however, a fire can occur at any time and the entire operating room team must be constantly vigilant to prevent and manage operating room fires.

  16. Control room philosophy: Principles of control room design and control room work; Kontrollrumsfilosofi: Principer foer kontrollrumsutformning och kontrollrumsarbete

    Energy Technology Data Exchange (ETDEWEB)

    Skriver, Jan; Ramberg, Jasmine; Allwin, Pernilla [Scandpower Risk Management AB, Uppsala (Sweden)

    2006-01-15

    In order to provide insights for improvement of work in control rooms several factors have to be considered. Knowledge of principles including control room philosophies will guide the recommended improvements. In addition to knowledge about specific principles an advantage for an organization can be an understanding of similarities and policies used in other high risk industry. The report has been developed on the basis of a document analysis of international standards and other guiding documents. (NUREG 0711, ISO 11064, ISO 6385, IEC 60964). In addition to the document analysis which has strived to compare the documents to see similarities in important principals, experience from working with control room design, modifications and evaluations in other high risk industries has pervaded the report. Important principles have been identified which are recommended to be included in a control room philosophy. Many of these are similar to the principles identified in the international standards. An additional principal which is regarded as important is the utilization of Key Performance Indicators (KPI) which can be used as a measure to target preventative means. Further more it is critical that the control room philosophy is easy to access and comprehend for all users. One of the challenges that remain after having developed a control room philosophy is how to utilize it in the daily work situation. It is vital that the document remains as a living document, guiding the continual improvement of the control room in the various life cycle stages.

  17. SELECCION Y CARACTERIZACION DE CONSORCIOS BACTERIANOS CON POTENCIALIDAD DE REMOVE RCO2 Y H2S EN UNA ATMOSFERA DE BIOGAS

    OpenAIRE

    QUIROZ ESPINOZA, MADELAINE SOLANGE

    2013-01-01

    La búsqueda de alternativas al uso del petróleo ha generado un fuerte interés en el desarrollo de energías no convencionales, como el biogás. En la actualidad se han implementado métodos físicos y químicos para remover los principales contaminantes del biogás. Sin embargo, también han surgido otros métodos de remoción de contaminantes que utilizan procesos microbiológicos, como el uso de consorcios bacterianos. Estos procedimientos se caracterizan por su robustez frente a fluctuaciones ambien...

  18. Benthic survey of natural and artificial reefs off Mar del Plata, Argentina, southwestern Atlantic Estudios del bentos de arrecifes naturales y artificiales de Mar del Plata, Argentina, Atlántico sudoccidental

    Directory of Open Access Journals (Sweden)

    Gabriel Genzano

    2011-11-01

    . Las caracterizaciones topográficas y los censos de invertebrados y peces se realizaron mediante buceo autónomo en noviembre y diciembre de 2005. Los datos ambientales y biológicos fueron analizados mediante análisis multivariados no paramétricos. Los arrecifes fueron principalmente discriminados acorde a su profundidad y posición del sustrato. El alga roja calcárea Corallina officinalis fue dominante en los NR poco profundos, mientras que conspicuas asociaciones del mitílido Mytilus platensis se encontraron a más de 3 m de profundidad; la anémona de mar Anthothoe chilensis fue más abundante a los 6-10 m y el coral blando Tripalea clavaria cerca de los 20 m de profundidad. No se evidenciaron diferencias entre los ARs de disposición horizontal y los NR aledaños. Las mayores diferencias fueron halladas en las comunidades de los sustratos verticales vs horizontales tanto en NRs y ARs. Se registraron 15 especies de peces. Aquellas con fuerte fidelidad por el habitat, e.g. Acanthistius brasilianus y Pseudopercis semifasciata, fueron claramente más abundantes y/o frecuentes en los ARs (pecios en comparación con los NRs. Este estudio pionero en el área mostró que los arrecifes permiten la fijación de diversas asociaciones bentónicas. Los ARs aportan además refugio para los peces. Debido a que la pesca recreacional y el buceo son actividades que se están desarrollando en Mar del Plata, donde el turismo es uno de los principales recursos económicos, la protección de estas áreas debería considerarse en los planes de conservación.

  19. Stability of disposal rooms during waste retrieval

    International Nuclear Information System (INIS)

    Brandshaug, T.

    1989-03-01

    This report presents the results of a numerical analysis to determine the stability of waste disposal rooms for vertical and horizontal emplacement during the period of waste retrieval. It is assumed that waste retrieval starts 50 years after the initial emplacement of the waste, and that access to and retrieval of the waste containers take place through the disposal rooms. It is further assumed that the disposal rooms are not back-filled. Convective cooling of the disposal rooms in preparation for waste retrieval is included in the analysis. Conditions and parameters used were taken from the Nevada Nuclear Waste Storage Investigation (NNWSI) Project Site Characterization Plan Conceptual Design Report (MacDougall et al., 1987). Thermal results are presented which illustrate the heat transfer response of the rock adjacent to the disposal rooms. Mechanical results are presented which illustrate the predicted distribution of stress, joint slip, and room deformations for the period of time investigated. Under the assumption that the host rock can be classified as ''fair to good'' using the Geomechanics Classification System (Bieniawski, 1974), only light ground support would appear to be necessary for the disposal rooms to remain stable. 23 refs., 28 figs., 2 tabs

  20. Three-dimensional point-cloud room model in room acoustics simulations

    DEFF Research Database (Denmark)

    Markovic, Milos; Olesen, Søren Krarup; Hammershøi, Dorte

    2013-01-01

    acquisition and its representation with a 3D point-cloud model, as well as utilization of such a model for the room acoustics simulations. A room is scanned with a commercially available input device (Kinect for Xbox360) in two different ways; the first one involves the device placed in the middle of the room...... and rotated around the vertical axis while for the second one the device is moved within the room. Benefits of both approaches were analyzed. The device's depth sensor provides a set of points in a three-dimensional coordinate system which represents scanned surfaces of the room interior. These data are used...... to build a 3D point-cloud model of the room. Several models are created to meet requirements of different room acoustics simulation algorithms: plane fitting and uniform voxel grid for geometric methods and triangulation mesh for the numerical methods. Advantages of the proposed method over the traditional...

  1. Three-dimensional point-cloud room model for room acoustics simulations

    DEFF Research Database (Denmark)

    Markovic, Milos; Olesen, Søren Krarup; Hammershøi, Dorte

    2013-01-01

    acquisition and its representation with a 3D point-cloud model, as well as utilization of such a model for the room acoustics simulations. A room is scanned with a commercially available input device (Kinect for Xbox360) in two different ways; the first one involves the device placed in the middle of the room...... and rotated around the vertical axis while for the second one the device is moved within the room. Benefits of both approaches were analyzed. The device's depth sensor provides a set of points in a three-dimensional coordinate system which represents scanned surfaces of the room interior. These data are used...... to build a 3D point-cloud model of the room. Several models are created to meet requirements of different room acoustics simulation algorithms: plane fitting and uniform voxel grid for geometric methods and triangulation mesh for the numerical methods. Advantages of the proposed method over the traditional...

  2. Analysis of room acoustics in Danish Hospitals

    DEFF Research Database (Denmark)

    Hoffmann, Ida Ørduk; Zapata Rodriguez, Valentina; Jeong, Cheol-Ho

    2018-01-01

    time (EDT) and T20, and the sound pressure level metrics, namely the equivalent level and peak level. In addition, the staff at the hospitals is asked about their personal perception of the acoustic and noise conditions and the correlation between their subjective disturbances......This project aims to compare room acoustic parameters and noise levels in various Danish hospitals: Odense, Gentofte, Bispebjerg, Hillerød and Aarhus Hospitals. Room acoustic conditions are measured in audiometric rooms at Odense, Gentofte, Bispebjerg and Aarhus hospitals. The noise levels...

  3. Assessment of daylight quality in simple rooms

    DEFF Research Database (Denmark)

    Johnsen, Kjeld; Dubois, Marie-Claude; Sørensen, Karl Grau

    The present report documents the results of a study on daylight conditions in simple rooms of residential buildings. The overall objective of the study was to develop a basis for a method for the assessment of daylight quality in a room with simple geometry and window configurations. As a tool...... in daylighting conditions for a number of lighting parameters. The results gave clear indications of, for instance, which room would be the brightest, under which conditions might glare be a problem and which type of window would yield the greatest luminous variation (or visual interest), etc....

  4. Air change. Ventilation requirements of closed rooms

    Energy Technology Data Exchange (ETDEWEB)

    Cords, W

    1988-04-01

    Closed rooms have to be ventilated in order to compensate influences changing the composition and quality of air. Details are given on the conditions and factors determining the required change of air as well as the design of ventilation systems. Reference is made to the respiratory consumption of oxygen, the increase of hazardous carbon dioxide contents causing headaches and indispositions, water vapor exhalations, body heat, odors, cold air coming in from outside, bodily heat losses, carbon dioxide limiting values, air speeds, and air pressures inside rooms. The humidity and temperatures of frequented rooms should keep within the maximum values. (HWJ).

  5. Evaluation of a dark-room

    International Nuclear Information System (INIS)

    Passos, J.C.

    1987-01-01

    The adequate operation conditions of a dark-room are essential to guarantee the image quality, the least exposure of the patient and the staff, contributing also to reduce the expenses with specific equipments and processing solutions. Therefore, to install a dark-room, it is necessary a previous study about its physical dimensions, the location of equipments, accessories, light safeguards and visual warning, besides adequate darkening and correct filme processing. We propose three basic tests to check the adequacy and the integrity of a dark-room: light safeguards test, hygiene test, developing time and temperature test. (Author) [pt

  6. Il dono del racconto

    DEFF Research Database (Denmark)

    Polito, Paola

    1998-01-01

    L'articolo indaga a vari livelli strutturali del romanzo "Il coraggio del pettirosso" (rete metaforica, dialogismo diegetico, dialogismo come fenomeno di voce, strategie discorsive messe in atto dalla voce narrante, stile colloquiale) la complessa realizzazione testuale del genere narrativo...

  7. 7 CFR 58.211 - Packaging room for bulk products.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Packaging room for bulk products. 58.211 Section 58... Service 1 Rooms and Compartments § 58.211 Packaging room for bulk products. A separate room or area shall... dust within the packaging room and where needed, a dust collector shall be provided and properly...

  8. SRF Clean Rooms and Cryomodule Assembly

    Data.gov (United States)

    Federal Laboratory Consortium — Three primary cleanroom facilities used for the SRF cryomodule production program are available. All 3 clean rooms have class 10 and class 100 areas. The largest is...

  9. Room temperature creep in metals and alloys

    Energy Technology Data Exchange (ETDEWEB)

    Deibler, Lisa Anne [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Materials Characterization and Performance

    2014-09-01

    Time dependent deformation in the form of creep and stress relaxation is not often considered a factor when designing structural alloy parts for use at room temperature. However, creep and stress relaxation do occur at room temperature (0.09-0.21 Tm for alloys in this report) in structural alloys. This report will summarize the available literature on room temperature creep, present creep data collected on various structural alloys, and finally compare the acquired data to equations used in the literature to model creep behavior. Based on evidence from the literature and fitting of various equations, the mechanism which causes room temperature creep is found to include dislocation generation as well as exhaustion.

  10. ENERGY STAR Certified Room Air Conditioners

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 4.0 ENERGY STAR Program Requirements for Room Air Conditioners that are effective as of...

  11. MEMS and Nano-Technology Clean Room

    Data.gov (United States)

    Federal Laboratory Consortium — The MEMS and Nano-Technology Clean Room is a state-of-the-art, 800 square foot, Class 1000-capable facility used for development of micro and sub-micro scale sensors...

  12. Mathematical Models for Room Air Distribution

    DEFF Research Database (Denmark)

    Nielsen, Peter V.

    1982-01-01

    A number of different models on the air distribution in rooms are introduced. This includes the throw model, a model on penetration length of a cold wall jet and a model for maximum velocity in the dimensioning of an air distribution system in highly loaded rooms and shows that the amount of heat...... removed from the room at constant penetration length is proportional to the cube of the velocities in the occupied zone. It is also shown that a large number of diffusers increases the amount of heat which may be removed without affecting the thermal conditions. Control strategies for dual duct and single...... duct systems are given and the paper is concluded by mentioning a computer-based prediction method which gives the velocity and temperature distribution in the whole room....

  13. Mathematical Models for Room Air Distribution - Addendum

    DEFF Research Database (Denmark)

    Nielsen, Peter V.

    1982-01-01

    A number of different models on the air distribution in rooms are introduced. This includes the throw model, a model on penetration length of a cold wall jet and a model for maximum velocity in the dimensioning of an air distribution system in highly loaded rooms and shows that the amount of heat...... removed from the room at constant penetration length is proportional to the cube of the velocities in the occupied zone. It is also shown that a large number of diffusers increases the amount of heat which may be removed without affecting the thermal conditions. Control strategies for dual duct and single...... duct systems are given and the paper is concluded by mentioning a computer-based prediction method which gives the velocity and temperature distribution in the whole room....

  14. Microalgal Mass Culture Room Harvest Records

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The microalgal mass culture room, housed at the NOAA Fisheries' Milford CT laboratory, provides research grade microalgae (phytoplankton) to in-house and...

  15. Concentration variation of radon in the room

    International Nuclear Information System (INIS)

    Komaruzaman Mohd Noor; Haziman Hassan; Rosli Mahat; Yusof Md Amin

    1995-01-01

    The study was carried out to determine the variation of radon concentration in the room. Radon detector used was solid nuclear tracks detector (SSNTD) LR-115. From this result, suitable points to make radon measurement was determined

  16. ENERGY STAR Certified Room Air Cleaners

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 1.2 ENERGY STAR Program Requirements for Room Air Cleaners that are effective as of July...

  17. Ergonomics influence on control room layout

    International Nuclear Information System (INIS)

    Hartfiel, H.D.

    1984-01-01

    Nowadays, human factors has become an important aspect of the design of work places. Since the control room in a nuclear power plant is a work place, too, its layout is also influenced by ergonomics. With the KWU control room concept for the 1300 MW PWR as an example, we show how assured and applicable ergonomic findings enter into the control room design. On the basis of general design principles for work places, specific methods for control room planning have been developed. By working with these methods a concept that makes it possible to build a man-machine interface able to fulfill the process control tasks with all their underlying conditions has been derived. (author)

  18. IMPROVED SYNTHESIS OF ROOM TEMPERATURE IONIC LIQUIDS

    Science.gov (United States)

    Room temperature ionic liquids (RTILs), molten salts comprised of N-alkylimidazolium cations and various anions, have received significant attention due to their commercial potential in a variety of chemical applications especially as substitutes for conventional volatile organic...

  19. When to use the emergency room - child

    Science.gov (United States)

    Emergency room - child; Emergency department - child; Urgent care - child; ER - when to use ... How quickly does your child need care? If your child could die or be permanently disabled, it is an emergency. Call 911 to have the ...

  20. New technologies for control room habitability assessment

    International Nuclear Information System (INIS)

    Lahti, G.P.; Muraida, J.E.; Perchiazzi, W.T.; Harden, P.A.

    1994-01-01

    Older nuclear power plants typically considered only a nominal amount of unfiltered inleakage (typically 10 cfm) impacting their postaccident control room habitability. However, recent measurements of unfiltered inleakage show values in excess of the nominal 10 cfm. A reassessment for two of these ''older'' stations has been completed recently to show that the measured inleakage did not jeopardize the safety of the control room occupants. Recent concerns at the Zion Station and the Palisades Station about control room habitability in the event of a loss-of-coolant accident have led to an extensive effort to increase control room habitability margin. The heating, ventilating and air-conditioning (HVAC) system servicing each of the control rooms has the potential for unfiltered in-leakage through many locations. For example, at the Palisades Station, the current limiting control room habitability analysis allows for 25 cfm unfiltered in-leakage through its normal outside air intake louvered isolation dampers during emergency mode into the control room envelope. This leakage value was not thought to be achievable with the existing as-built configuration. Repairing the system was considered a potential solution; however, this would be costly and could negatively affect plant operation. In addition, the system would still be required to meet the low specified unfiltered in-leakage. An alternate approach was to review the analysis and reassess the most important parameters. The key effort was to determine the atmospheric dispersion factors (χ/Qs) through wind tunnel tests using scale models of the stations. The results of the wind tunnel testing could yield more realistic χ/Qs for control room habitability than previously employed methods. The wind tunnel study options were selected based on their ease of implementation, realistic results, and low cost. More importantly, the results of the studies would allow more realistic values of unfiltered inleakage

  1. Discussion on control room habitability assessment

    International Nuclear Information System (INIS)

    Li Bing; Chen Yingying; Xiao Jun; Yang Duanjie; Cui Hao

    2014-01-01

    The discussion on control room envelope integrity, source term analysis in habitability assessments and other impact factors for dose consequence is provided combined with regulatory requirements and the current status of domestic NPPs. Considering that the infiltration is an important factor for control room habitability assessment, CRE integrity test should be performed to demonstrate the CRE's infiltration characteristics. The consequence assessment should be performed based on different DBAs and different pathways, such as pathways internal to the plant. (authors)

  2. The Active Listening Room Simulator: Part 2

    OpenAIRE

    Naqvi, Amber; Rumsey, Francis

    2001-01-01

    This paper presents the results of computer simulation of active reflectors in a reference listening room which are used to create artificial reflections in a two speaker, stereo listening configuration. This formulates the second phase of experiments in the active listening room project involving the analysis of computer modeling results and loudspeaker selection based on free field response. The aim of this project is to create a truly variable listening condition in a reference listening r...

  3. From Smart Rooms to Smart Hotels

    OpenAIRE

    Petrevska, Biljana; Cingoski, Vlatko; Gelev, Saso

    2016-01-01

    This paper gives an overview of a potential path that new hotels have to satisfy to improve their status from a hotel with smart rooms towards a full-scale smart hotel facility. It presents a possible transitional way including innovative applications based on modern information technology for ambient settings in the domain of hotel industry that aims to improve the quality of offered services towards clients, starting from the present level of smart rooms. The main objective i...

  4. Radiation protection in the operating room

    International Nuclear Information System (INIS)

    Kunz, B.; Stargardt, A.

    1978-01-01

    On the basis of legally provided area dose measurements and time records of fluoroscopic examinations during the operation, radiation doses to medical personnel and patients are evaluated. Adequate radiation protection measures and a careful behaviour in the operating room keep the radiation exposure to the personnel below the maximum permissible exposure. Taking into account the continuous personnel radiation monitoring and medical supervision, radiation hazards in the operating room can be considered low

  5. Control rooms in German nuclear power plants

    International Nuclear Information System (INIS)

    Hoffmann, E.

    1999-01-01

    The paper explains and illustrates the dissimilarity in design and equipment of control rooms in German NPPs, as well as a historical survey of the general principles and approaches applied in the evolution of control room technology, including backfitting activities. Experience obtained from daily operation as well training at the simulators is taken as a basis to formulate fundamental requirements for modification or novel design approaches. (orig./CB) [de

  6. Physics escape room as an educational tool

    Science.gov (United States)

    Vörös, Alpár István Vita; Sárközi, Zsuzsa

    2017-12-01

    Escape rooms have flourished in the last decade. These are adventure games in which players work together to solve puzzles using hints, clues and a strategy to escape from a locked room. In many cases they use different phenomena related to physics. Hence the idea of using escape rooms in science centers or even in classroom activities. Escape rooms are designed for one single team of players, the method is more suitable for activities in a science centre. In our paper, we show that escape rooms' puzzle solving methods could be used in physics classroom activities as well, taking into account that several teams have to work together in the same room/place. We have developed an educational escape game for physics of fluids, as this topic is left out from the Romanian high-school curriculum. We have tried out our game during the project week called "Şcoala altfel" ("school in a different way") and in a physics camp for gifted students. We present the designed physics escape game and the results.

  7. Clinic exam room design: present and future.

    Science.gov (United States)

    Freihoefer, Kara; Nyberg, Gary; Vickery, Christine

    2013-01-01

    This article aims to deconstruct various design qualities and strategies of clinic exam rooms, and discuss how they influence users' interaction and behavior in the space. Relevant literature supports the advantages and disadvantages of different design strategies. Annotated exam room prototypes illustrate the design qualities and strategies discussed. Advancements in technology and medicine, along with new legislative policies, are influencing the way care providers deliver care and ultimately clinic exam room designs. The patient-centered medical home model has encouraged primary care providers to make patients more active leaders of their health plan which will influence the overall functionality and configuration of clinic exam rooms. Specific design qualities discussed include overall size, location of doors and privacy curtains, positioning of exam tables, influence of technology in the consultation area, types of seating, and placement of sink and hand sanitizing dispensers. In addition, future trends of exam room prototypes are presented. There is a general lack of published evidence to support design professionals' design solutions for outpatient exam rooms. Future research should investigate such topics as the location of exam tables and privacy curtains as they relate to patient privacy; typical size and location of consultation table as it relates to patient connection and communication; and placement of sinks and sanitization dispensers as they relate to frequency and patterns of usage. Literature review, outpatient, technology, visual privacy.

  8. Rethinking theatre in modern operating rooms.

    Science.gov (United States)

    Riley, Robin; Manias, Elizabeth

    2005-03-01

    Metaphor is a means through which a widely accepted meaning of a word is used in a different context to add understanding that would otherwise be difficult to conceive. Through etymological and metaphorical associations, we contend that aspects of "theatre" are still relevant in the modern operating rooms and that the use of dramaturgical metaphors can add another layer of understanding about the social reality in this setting. We begin by exploring the historical roots and derivation of the word theatre as it applied to anatomical dissection and surgery. Briefly, we touch on the work of Erving Goffman and examine how his work has been used by others to explore aspects of operating room nursing. Then, drawing on data from a postmodern ethnographic study that has been used to examine communication in operating room nursing, four dramaturgical metaphors are used to illustrate the argument. They are drama, the script and learning the lines, the show must go on, and changing between back stage and front stage. To conclude, the small amount of previously published literature on this topic is compared and contrasted, and the relevance of using dramaturgical metaphors to understand modern operating rooms is discussed. Being able to distinguish between the inherent drama in operating room work and the dramatic realisation of individuals who work within, can help operating room nurses to think differently about, and perhaps re-evaluate their social situation and how they function within it.

  9. Consumer opinions of emergency room medical care.

    Science.gov (United States)

    McMillan, J R; Younger, M S; DeWine, L C

    1984-12-01

    If hospital management is to adapt successfully to an increasingly competitive environment, and to retain a viable emergency department, it well be necessary to objectively and accurately assess the hospital's image in the community served. Knowledge of the consumers' views is an essential input into the formulation of strategic plans. This article reports on a study in which consumer opinions on 15 dimensions of emergency room health care were obtained from 723 respondents using a mail questionnaire. Findings reveal that consumers view the emergency room as being more expensive than other health care providers. Except for being available or convenient, little or no advantage is perceived for the emergency room over the personal physician. Even though the emergency room has specialized staff and equipment, consumers do not believe patients receive better or faster treatment in an emergency room than would be obtained in a physician's office. Unless changed, these perceptions will diminish the role of the emergency room in the delivery of health care services.

  10. del cambio

    Directory of Open Access Journals (Sweden)

    Alejandro Canales

    2006-01-01

    Full Text Available El artículo analiza las propuestas y los compromisos en materia de cobertura y de financiamiento en el periodo 2000-2006. En particular, revisa las modificaciones y los ajustes de los tres principales documentos en los que se expresaron las iniciativas: el de la Asociación Nacional de Universidades e Instituciones de Educación Superior, el del equipo de la transición y el programa sectorial. Los resultados muestran que las cifras de atención a la demanda educativa e inversión quedaron lejos de las metas autoimpuestas por el gobierno federal y que será necesario realizar mayores esfuerzos para atender tales desafíos.

  11. Room acoustics modeling using a point-cloud representation of the room geometry

    DEFF Research Database (Denmark)

    Markovic, Milos; Olesen, Søren Krarup; Hammershøi, Dorte

    2013-01-01

    Room acoustics modeling is usually based on the room geometry that is parametrically described prior to a sound transmission calculation. This is a highly room-specific task and rather time consuming if a complex geometry is to be described. Here, a run time generic method for an arbitrary room...... geometry acquisition is presented. The method exploits a depth sensor of the Kinect device that provides a point based information of a scanned room interior. After post-processing of the Kinect output data, a 3D point-cloud model of the room is obtained. Sound transmission between two selected points...... level of user immersion by a real time acoustical simulation of a dynamic scenes....

  12. Synthesis and characterization of RUM catalysts (M=SE,MO,W,SN) applied in ORR for a PEMFC fuel battery; Sintesis y caracterizacion de catalizadores RUM (M=SE,MO,W,SN) aplicados en la RRO para una pila de combustible PEMFC

    Energy Technology Data Exchange (ETDEWEB)

    Ezeta-Mejia, A.; Arce Estrada, E.M. [Instituto Politecnico Nacional, Mexico, D.F. (Mexico)]. E-mail: araceli-ezeta@hotmail.com; earce@ipn.mx

    2009-09-15

    baja temperatura y ofrecen una alta combinacion entre densidad de potencia y alta eficiencia en la conversion de energia, lo que las hace adecuadas para aplicaciones portatiles. Sin embargo, la reaccion de reduccion de oxigeno, RRO, que se lleva a cabo en el catodo de la pila, juega un papel determinante debido a que es la reaccion limitante del proceso, por lo que se requiere el empleo de electrocatalizadores mas eficientes. El electrocatalizador optimo para esta reaccion es el Pt, pero debido a su costo elevado se han tenido que buscar electrocatalizadores alternativos que conjuguen una alta actividad, estabilidad y bajo costo. Muchas investigaciones han mostrado que los catalizadores binarios base Pt tales como Pt-M (M= Co, Fe, etc.) presentan una buena actividad electrocatalitica para la RRO; otros estudios demuestran que los catalizadores base Ru (RuSe, RuSe,Mo, RuSeRh) tambien poseen una adecuada actividad para esta reaccion. En este estudio, se reporta la sintesis por aleado mecanico a diferentes tiempos de molienda (0, 20 y 40 h) de electrocatalizadores nanoparticulados de tipo RuPt{sub x}M (x=0, 0.6% y M=Se,Mo,W,Sn). Los materiales sintetizados por aleado mecanico se caracterizaron por microscopia electronica de barrido y por difraccion de rayos X, obteniendose particulas aglomeradas y dispersas entre 1 y 30 {mu}m. La caracterizacion electrocatalitica se llevo a cabo mediante las tecnicas de VC y EDR en una solucion de H{sub 2}SO{sub 4} 0.5 M a temperatura ambiente. Los sistemas presentan un orden de reaccion de 1, respecto a la RRO y una transferencia global multielectronica de 4e{sup -} para la formacion de agua. Se realizo una comparacion de la actividad electrocatalitica en presencia y ausencia de Pt, mostrando que el Pt incrementa la actividad catalitica de los materiales en al menos un orden de magnitud.

  13. Control room habitability study: findings and recommendations

    International Nuclear Information System (INIS)

    Driscoll, J.W.

    1986-01-01

    The Advisory Committee on Reactor Safeguards (ACRS) has raised a number of concerns related to control room habitability and has recommended actions which they believe could alleviate these concerns. As a result of the ACRS's concerns, the US Nuclear Regulatory Commission's (NRC) Office of Nuclear Reactor Regulation (NRR) in conjunction with the Offices of Research and Inspection and Enforcement, and the NRC regional offices, embarked upon a program to reevaluate Control Room Habitability. Argonne National Laboratory was contracted by the NRC to perform a Control Room Habitability Study on twelve licensed power reactors. The plants selected for the study were chosen based upon architect engineer, nuclear steam system supplier, utility, and plant location. Participants in the study review the plant design as contained in the Updated Safety Analysis Report, Technical Specifications, Three Mile Island action item III.D.3.4 submittal on Control Room Habitability, NRC staff evaluation of the III.D.3.4 submittal, appropriate plant operating procedures, system drawings, and significant Licensee Event Reports on Loss of Cooling to the Control Room Envelope. A two-day visit is then made to the plant to determine if the as-built systems are built, operated, and surveillance performed as described in the documentation reviewed prior to the visit. The major findings of this study are included in this report along with generic recommendations of the review team that apply to control room HVAC systems. Although the study is not complete, at the time of publication of this report, the results obtained to date should be useful to persons responsible for Control Room Habitability in evaluating their own systems

  14. La superaci??n del modelo del ??ngel del hogar:

    OpenAIRE

    Hurtado Mu??oz, M??nica

    2012-01-01

    La Tesis Doctoral titulada "La superaci??n del modelo del "??ngel del hogar". Recuperaci??n de la escritora Leonor Canalejas y Fustegueras (1869-1945)" aborda, en primer lugar, un an??lisis sociol??gico de las circunstancias que rodearon a la mujer espa??ola en el cambio de siglo en el ??mbito social y educativo, en un intento de esclarecer las caracter??sticas propias del contexto en el que la mujer accede a la intelectualidad en general y a la literatura en particular. Esta parte concluye q...

  15. Control room habitability study - findings and recommendations

    International Nuclear Information System (INIS)

    Driscoll, J.W.

    1987-01-01

    The Advisory Committee on Reactor Safeguards (ACRS) has raised a number of concerns related to control room habitability and has recommended actions which they believe could alleviate these concerns. As a result of the ACRS's concerns, the US Nuclear Regulatory Commission's (NRC) Office of Nuclear Reactor Regulation (NRR) in conjunction with the Offices of Research and Inspection and Enforcement, and the NRC regional offices, embarked upon a program to reevaluate Control Room Habitability. Argonne National Laboratory was contracted by the NRC to perform a Control Room Habitability Study on twelve licensed power reactors. The plants selected for the study were chosen based upon architect engineer, nuclear steam system supplier, utility, and plant location. The major findings of this study are included in this report along with generic recommendations of the review team that apply to control room HVAC systems. Although the study is not complete, at the time of publication of this report, the results obtained to date should be useful to persons responsible for Control Room Habitability in evaluating their own systems

  16. ALICE’s new meeting room

    CERN Multimedia

    2009-01-01

    There’s no reason to be late for a meeting in Wonderland (Point 2) anymore as ALICE gets a brand new conference room and a ‘clean up’. The new ALICE conference room.You won’t find Building 3294 on the CERN map yet, but it is already being used. If you follow the white rabbit just inside the entrance at point 2, you will find a new conference room and office space for 12 people. "Previously at Point 2 we’ve had very little office space at all. Our old conference room was inside the main building, SX2, but it was cramped and extremely noisy," explained Frank Cliff from ALICE. "As soon as they turned on the overhead cranes you could barely hear yourself think!" The plans for the new building were drawn up by the Civil Engineering Group, and construction started in August last year. The building was completed and already in use before Christmas. The 109 square metre conference room can fit up to 60 people and is fully equipped...

  17. Role of Magnetocardiography in Emergency Room

    International Nuclear Information System (INIS)

    Kwon, H.; Kim, K.; Kim, J. M.; Lee, Y. H.; Kim, T. E.; Lim, H. K.; Park, Y. K.; Ko, Y. G.; Chung, N.

    2006-01-01

    In emergency rooms, patients with acute chest pain should be diagnosed as quickly as possible with higher diagnostic accuracy for an appropriate therapy to the patients with acute coronary syndrome or for avoiding unnecessary hospital admissions. At present, electrocardiography(ECG) and biochemical markers are generally used to detect myocardial infarction and coronary angiography is used as a gold standard to reveal the degree of narrowing of coronary artery. Magnetocardiography(MCG) has been proposed as a novel and non-invasive diagnostic tool fur the detection of cardiac electrical abnormality associated with myocardial ischemia. In this study, we examined whether the MCG can be used fur the detection of coronary artery disease(CAD) in patients, who were admitted to the emergency room with acute chest pain. MCG was recorded from 36 patients admitted to the emergency room with suspected acute coronary syndrome. The MCG recordings were obtained using a 64-channel SQUID MCG system in a magnetically shielded room. In result, presence of CAD could be found with a sensitivity of 88.2 % in patients with acute chest pain without 57 elevation in ECG, demonstrating a possible use in the emergency room to screen CAD patients.

  18. TUGAS ROOM ATTENDANT DALAM MENANGANI COMPLAINT TAMU DELUXE ROOM HOTEL HYAAT REGENCY BANDUNG

    Directory of Open Access Journals (Sweden)

    Reza Gustia Purnama

    2016-05-01

    Full Text Available Abstract - The problem is how meticulous the duties and responsibilities of the room attendant in the deluxe room Hotel Hyatt Regency Bandung, standard operational procedures in the deluxe room Hotel Hyatt Regency Bandung, and handling guest complaint in deluxe room Hotel Hyatt Regency Bandung. Author uses descriptive analysis, which is a form of writing in the actual situation describes strive about the object of research, then the data obtained in the form of a report compiled in. Based on the results of observation it can be concluded that the task and responsibility of the room attendant in the deluxe room Hyatt Regency Bandung already carry it out in accordance with standard operational procedures (SOP which is divided into two shifts, morning and evening shift which has a slightly different task, standard operational procedures in the deluxe room Hyatt Regency Bandung has been standard operating procedure in applying it at the hotel Hyatt Regency Bandung, and Guest complaint handling in deluxe room Hyatt Regency Bandung Hotel how to deal with and resolve the complaint vary slightly in view of the type of complaint. Based on the results of observation and discussion, the authors conclude that the Duty room attendant in handling customers compaint deluxe room in the Hyatt Regency Bandung Hotel when his handlers was conducted appropriately and propesional effects will be good for the image of the hyatt regency hotel bandung.   Keywords: Room Attendant, Complaint, Deluxe room   Abstraksi - Masalah yang di teliti adalah tugas dan tanggung jawab room attendant di deluxe room Hotel Hyatt Regency Bandung, standar operasional prosedur di deluxe room Hotel Hyatt Regency Bandung, dan penanganan complaint tamu di deluxe room Hotel Hyatt Regency Bandung.  Metode yang di gunakan menggunakan analisis deskriptif, yaitu bentuk penulisan yang di upayakan menggambarkan keadaan yang sebenarnya tetang objek penelitian,kemudian data yang di peroleh disusun

  19. Room Airflows with Low Reynolds Number Effects

    DEFF Research Database (Denmark)

    Topp, Claus; Nielsen, Peter V.; Davidson, Lars

    The behaviour of room airflows under fully turbulent conditions is well known both in terms of experiments and, numerical calculations by computational fluid dynamics (CFD). For room airflows where turbulence is not fully developed though, i.e. flows at low Reynolds numbers, the existing knowledge...... is limited. It has been the objective to investigate the behaviour of a plane isothermal wall jet in a full-scale ventilated room at low Reynolds numbers, i.e. when the flow is not fully turbulent. The results are significantly different from known theory for fully turbulent flows. It was found that the jet...... constants are a strong function of the Reynolds number up to a level of Reh≈500....

  20. Assessing ventilation system performance in isolation rooms

    Energy Technology Data Exchange (ETDEWEB)

    Balocco, Carla [Department of Energy Engineering ' ' Sergio Stecco' ' , via S. Marta 3, Firenze (Italy); Lio, Pietro [Computer Laboratory, University of Cambridge, 15 JJ Thompson Avenue, CB03FD Cambridge (United Kingdom)

    2011-01-15

    In this paper numerical transient simulations were used to investigate the air flow patterns, distribution and velocity, and the particulate dispersion inside an existing typical hospitalization room equipped with an advanced Heating Ventilation Air Conditioning (HVAC), with Variable Air Volume (VAV) primary air system designed for immune-suppressed patients never modelled before. The three-dimensional models of the room consider different, most typical, positions of the patients. Results indicate the best conditions for the high induction air inlet diffuser and the scheme of pressures imposed in the room to provide the effective means of controlling flows containing virus droplets. We believe that our work exemplifies the usefulness of numerical investigations of HVAC performances in real situations and provides important recommendations towards disease control and careful design and optimization of ventilation in hospital settings. (author)

  1. Engineering Process Monitoring for Control Room Operation

    CERN Document Server

    Bätz, M

    2001-01-01

    A major challenge in process operation is to reduce costs and increase system efficiency whereas the complexity of automated process engineering, control and monitoring systems increases continuously. To cope with this challenge the design, implementation and operation of process monitoring systems for control room operation have to be treated as an ensemble. This is only possible if the engineering of the monitoring information is focused on the production objective and is lead in close collaboration of control room teams, exploitation personnel and process specialists. In this paper some principles for the engineering of monitoring information for control room operation are developed at the example of the exploitation of a particle accelerator at the European Laboratory for Nuclear Research (CERN).

  2. Personal Exposure in Displacement Ventilated Rooms

    DEFF Research Database (Denmark)

    Brohus, Henrik; Nielsen, Peter Vilhelm

    1996-01-01

    in the lower part of the room close to the occupant. A personal exposure model for displacement ventilated rooms is proposed. The model takes the influence of gradients and the human thermal boundary layer into account. Two new quantities describing the interaction between a person and the ventilation......Personal exposure in a displacement ventilated room is examined. The stratified flow and the considerable concentration gradients necessitate an improvement of the widely used fully mixing compartmental approach. The exposure of a seated and a standing person in proportion to the stratification...... contaminant sources, this entrainment improves the indoor air quality. Measurements of exposure due to a passive contaminant source show a significant dependence on the flow field as well as on the contaminant source location. Poor system performance is found in the case of a passive contaminant released...

  3. An Informationally Structured Room for Robotic Assistance

    Directory of Open Access Journals (Sweden)

    Tokuo Tsuji

    2015-04-01

    Full Text Available The application of assistive technologies for elderly people is one of the most promising and interesting scenarios for intelligent technologies in the present and near future. Moreover, the improvement of the quality of life for the elderly is one of the first priorities in modern countries and societies. In this work, we present an informationally structured room that is aimed at supporting the daily life activities of elderly people. This room integrates different sensor modalities in a natural and non-invasive way inside the environment. The information gathered by the sensors is processed and sent to a centralized management system, which makes it available to a service robot assisting the people. One important restriction of our intelligent room is reducing as much as possible any interference with daily activities. Finally, this paper presents several experiments and situations using our intelligent environment in cooperation with our service robot.

  4. Concentration Distribution in a Mixing Ventilated Room

    DEFF Research Database (Denmark)

    Jensen, Rasmus Lund; Pedersen, D.N.; Nielsen, Peter V.

    2001-01-01

    Today there is an increasing focus on the importance of a proper ventilation system to obtain good working conditions in the term of air and thermal quality to ensure high productivity. Different ventilation principles are used, e.g., mixing ventilation and displacement ventilation. In order...... that the air is fully mixed. The objective of this work is to determine the influence of the location of a pollutant, temperature differences and whether the room is furnished or not. It is also investigated if it is sufficient to determine the mean concentration in the room to determine the personal exposure....... Full scale experiments along with a breathing thermal manikin (BTM) have been used. The results show that the location of the sources is of great importance, just as well as temperature differences. Furthermore, the concentration in the breathing zone showed large differences throughout the room....

  5. Determination of radon in housing rooms

    International Nuclear Information System (INIS)

    Steger, F.; Sorantin, H.; Kozuh-Schneeberger, J.; Lovranich, E.; Khademi, B.

    1988-03-01

    Radon concentration in 171 apartments with 503 rooms in and around Vienna was measured by a passive measuring system. Polycarbonate foils were exposed during 3 months; the nuclear tracks were visualized by electro-chemical method and evaluated. In housing- and sleeping rooms the mean concentration was 1,03 pCi/l, in cellars 2,15 pCi/l. The equivalent dosis, with 1,03 pCi/l was estimated to 90 mrem/a. At the same time the external radiation dose in the same rooms was measured by TL dosimeters and the dose estimated is again 90 mrem/a. 34 refs., 16 figs., 4 tabs. (qui)

  6. Determination of the exposure speed of radiation emitted by the linear accelerator, using the code MCNP5 to evaluate the radiotherapy room shields of ABC Hospital; Determinacion de la rapidez de exposicion de la radiacion emitida por el acelerador lineal, utilizando el codigo MCNP5, para evaluar los blindajes de la sala de radioterapia del Hospital ABC

    Energy Technology Data Exchange (ETDEWEB)

    Corral B, J. R.

    2015-07-01

    Humans should avoid exposure to radiation, because the consequences are harmful to health. Although there are different emission sources of radiation, generated by medical devices they are usually of great interest, since people who attend hospitals are exposed in one way or another to ionizing radiation. Therefore, is important to conduct studies on radioactive levels that are generated in hospitals, as a result of the use of medical equipment. To determine levels of exposure speed of a radioactive facility there are different methods, including the radiation detector and computational method. This thesis uses the computational method. With the program MCNP5 was determined the speed of the radiation exposure in the radiotherapy room of Cancer Center of ABC Hospital in Mexico City. In the application of computational method, first the thicknesses of the shields were calculated, using variables as: 1) distance from the shield to the source; 2) desired weekly equivalent dose; 3) weekly total dose equivalent emitted by the equipment; 4) occupation and use factors. Once obtained thicknesses, we proceeded to model the bunker using the mentioned program. The program uses the Monte Carlo code to probabilistic ally determine the phenomena of interaction of radiation with the shield, which will be held during the X-ray emission from the linear accelerator. The results of computational analysis were compared with those obtained experimentally with the detection method, for which was required the use of a Geiger-Muller counter and the linear accelerator was programmed with an energy of 19 MV with 500 units monitor positioning the detector in the corresponding boundary. (Author)

  7. Gas explosion in a room with a window and passage to an adjacent room

    Directory of Open Access Journals (Sweden)

    Polandov Yuri

    2016-01-01

    Full Text Available Some publications describe an effect, produced during a physical model experiment, when an adjacent gas-free room influences the gas explosion pressure in a room with a window. The explosion pressure in this case significantly exceeds (2.5 times the explosion pressure in a room without an adjacent room. This result has been confirmed by our studies. Based on other available information about the influence of the ignition point location on the explosion pressure in one room, it was suggested that this could be true for an explosion in two rooms. In our studies we used a test unit with two connected chambers, each having a volume of 1.125 m3. It turned out that this influence of the adjacent volume was not so unambiguous as it was described in those publications. It was found out that the maximum effect of explosion pressure amplification by the adjacent room is achieved, when the igniter is located in the chamber filled with a gas-air mixture in the area between the center of the chamber and the window (maximum amplification by more than 3 times. This effect is lower directly by the window (1.8 times and is practically absent in case of ignition within the area near the passage connecting the chamber with the adjacent room. This suggests that the effect discovered earlier is a special case of the general dependence of the gas explosion pressure in two chambers on the igniter location.

  8. Multi-bed patient room architectural evaluation

    Directory of Open Access Journals (Sweden)

    Evangelia Sklavou

    2016-12-01

    Full Text Available Introduction: Leveraging the physical environment’s merits is crucial in healthcare settings towards fostering sustainable healing conditions. In the future, the need to retrofit hospitals already appears more probable than to build new facilities. In Greece, holistic healthcare architecture has significant potential and room to develop. Aim: The architectural research of multi-bed patient room environment. Method: A sample of multi-bed patient rooms of a Greek hospital was studied per architectural documentation and user evaluation survey. Beyond recording the existing situation and user experience, user group differences and the influence of window proximity were studied. The survey sample was based on convenience and comprised 160 patients and 136 visitors. Statistical analysis was performed in SPSS 20, using chi-square exact tests of independence. The chosen level of significance was p < 0.05. Results: Architectural documentation showed that the building morphology had a positive impact in patient rooms, with regard to sunlight penetration and view. Further solar daylight control was deemed necessary, to facilitate overall environmental comfort conditions. High spatial density and considerable disadvantages of the middle patient bed, compared to the one bedside the window and the one further in the back of the room, were also ascertained. User groups did not evaluate their surroundings significantly different, with the exception of ease of access to the view. Window proximity influenced both patients and visitors in evaluating ease of access to the view and visual discomfort. Patients were further affected on window size evaluation and visitors on view related aspects. Conclusions: Synergy between building form and function contributes in creating holistic sustainable healing environments. User evaluation can deviate from objective documentation. Patients and visitors experienced the patient room in a similar manner. The middle bed was

  9. Computer vision based room interior design

    Science.gov (United States)

    Ahmad, Nasir; Hussain, Saddam; Ahmad, Kashif; Conci, Nicola

    2015-12-01

    This paper introduces a new application of computer vision. To the best of the author's knowledge, it is the first attempt to incorporate computer vision techniques into room interior designing. The computer vision based interior designing is achieved in two steps: object identification and color assignment. The image segmentation approach is used for the identification of the objects in the room and different color schemes are used for color assignment to these objects. The proposed approach is applied to simple as well as complex images from online sources. The proposed approach not only accelerated the process of interior designing but also made it very efficient by giving multiple alternatives.

  10. Building for changing-rooms, laundry, laboratories

    International Nuclear Information System (INIS)

    Nemeth, L.; Mezes, J.; Gulyas, F.; Hejj, A.; Matyas, J.

    1979-01-01

    This building accomodates important service sections of the power plant. The changing-rooms of the primary circuit are here, through which the employees, under the supervision of health physics service, pass to the radioactive contaminated jobs. Working-clothes are cleaned in laundries located on the ground-floor. The building houses the health measurement control rooms of the four reactor sets and the control centre of the power plant. The laboratories dealing with process control, electrical engineering, radiology, dosimetry, material tests and reactor physics will be located here. (author)

  11. Control room habitability system review models

    International Nuclear Information System (INIS)

    Gilpin, H.

    1990-12-01

    This report provides a method of calculating control room operator doses from postulated reactor accidents and chemical spills as part of the resolution of TMI Action Plan III.D.3.4. The computer codes contained in this report use source concentrations calculated by either TACT5, FPFP, or EXTRAN, and transport them via user-defined flow rates to the control room envelope. The codes compute doses to six organs from up to 150 radionuclides (or 1 toxic chemical) for time steps as short as one second. Supporting codes written in Clipper assist in data entry and manipulation, and graphically display the results of the FORTRAN calculations. 7 refs., 22 figs

  12. Evaporation Controlled Emission in Ventilated Rooms

    DEFF Research Database (Denmark)

    Topp, Claus; Nielsen, Peter V.; Heiselberg, Per

    -scale ventilated room when the emission is fully or partly evaporation controlled. The objective of the present research work has been to investigate the change of emission rates from small-scale experiments to full-scale ventilated rooms and to investigate the influence of the local air velocity field near......Emission of volatile organic compounds (VOCs) from materials is traditionally determined from tests carried out in small-scale test chambers. However, a difference in scale may lead to a difference in the measured emission rate in a small-scale test chamber and the actual emission rate in a full...

  13. Working conditions of a radiodiagnostic room

    International Nuclear Information System (INIS)

    Chikirdin, Eh.G.

    1983-01-01

    The concept of ''operating load'' of an X-ray diagnostic room is explained. The concept includes the calculation of the Week's maximum exposure calculation and monitoring of stationary radiation shielding, measurements of exposure dose rate at working places. In this case the substitution of the actual repeated short-time regime of emitter operation for the calculated continuous regime is performed. The data on the ''operating load'' of X-ray diagnostic room are presented taking into account the method of X-ray investigation

  14. HAMMLAB 1999 experimental control room: design - design rationale - experiences

    International Nuclear Information System (INIS)

    Foerdestroemmen, N. T.; Meyer, B. D.; Saarni, R.

    1999-01-01

    A presentation of HAMMLAB 1999 experimental control room, and the accumulated experiences gathered in the areas of design and design rationale as well as user experiences. It is concluded that HAMMLAB 1999 experimental control room is a realistic, compact and efficient control room well suited as an Advanced NPP Control Room (ml)

  15. The radiation dose dilemma in the hybrid operating room

    NARCIS (Netherlands)

    de Ruiter, QMB

    2016-01-01

    The of the hybrid Operation room (an operation room combined with advanced radiological X-ray equipment) is gaining popularity, as it is now the preferred room to perform (complex) endovascular aortic procedures. The fixed C-arms equipped in these rooms make it possible to gain very high image

  16. Room acoustic transition time based on reflection overlap

    DEFF Research Database (Denmark)

    Jeong, Cheol-Ho; Brunskog, Jonas; Jacobsen, Finn

    2010-01-01

    A transition time is defined based on the temporal overlap of reflected pulses in room impulse responses. Assuming specular reflections only, the temporal distance between adjacent reflections, which is proportional to the volume of a room, is compared with the characteristic width of a pulse at ...... in a room with nonuniform absorption and furniture than in a room that satisfies the underlying assumptions....

  17. Room acoustic transition time based on reflection overlap

    DEFF Research Database (Denmark)

    Jeong, Cheol-Ho; Brunskog, Jonas; Jacobsen, Finn

    2013-01-01

    A transition time is defined based on the temporal overlap of reflected pulses in room impulse responses. Assuming specular reflections only, the temporal distance between adjacent reflections, which is proportional to the volume of a room, is compared with the characteristic width of a pulse at ...... in a room with nonuniform absorption and furniture than in a room that satisfies the underlying assumptions....

  18. Survey of licensee control room habitability practices

    International Nuclear Information System (INIS)

    Boland, J.F.; Brookshire, R.L.; Danielson, W.F.; Driscoll, J.W.; Graham, E.D.; McConnell, R.J.; Thompson, V.N.

    1985-04-01

    This document presents the results of a survey of Licensee control-room-habitability practices. The survey is part of a comprehensive program plan instituted in August 1983 by the NRC to respond to ongoing questions from the Advisory Committee on Reactor Safeguards (ACRS). The emphasis of this survey was to determine by field review the control-room habitability practices at three different plants, one of which is still under construction and scheduled to receive an operating license in 1986. The other two plants are currently operating, having received operating licenses in the mid-1970's and early 1980's. The major finding of this survey is that despite the fact that the latest control-room-habitability systems have become larger and more complex than earlier systems surveyed, the latest systems do not appear to be functionally superior. The major recommendation of this report is to consolidate into a single NRC document, based upon a comprehensive systems engineering approach, the pertinent criteria for control-room-habitability design

  19. Intrahospital teleradiology from the emergency room

    Science.gov (United States)

    Fuhrman, Carl R.; Slasky, B. S.; Gur, David; Lattner, Stefanie; Herron, John M.; Plunkett, Michael B.; Towers, Jeffrey D.; Thaete, F. Leland

    1993-09-01

    Off-hour operations of the modern emergency room presents a challenge to conventional image management systems. To assess the utility of intrahospital teleradiology systems from the emergency room (ER), we installed a high-resolution film digitizer which was interfaced to a central archive and to a workstation at the main reading room. The system was designed to allow for digitization of images as soon as the films were processed. Digitized images were autorouted to both destinations, and digitized images could be laser printed (if desired). Almost real time interpretations of nonselected cases were performed at both locations (conventional film in the ER and a workstation in the main reading room), and an analysis of disagreements was performed. Our results demonstrate that in spite of a `significant' difference in reporting, `clinically significant differences' were found in less than 5% of cases. Folder management issues, preprocessing, image orientation, and setting reasonable lookup tables for display were identified as the main limitations to the systems' routine use in a busy environment. The main limitation of the conventional film was the identification of subtle abnormalities in the bright regions of the film. Once identified on either system (conventional film or soft display), all abnormalities were visible and detectable on both display modalities.

  20. Room for Women : YouTube film

    NARCIS (Netherlands)

    CWI CWI

    2010-01-01

    htmlabstractThe Centrum Wiskunde & Informatica (CWI) signed the "Talent to the Top" Charter. CWI is highlighting the objective of this national task force to enable more women to flow to senior talent positions. To illustrate this CWI created the short film 'Room for Women'. In this film four female

  1. Modelling aerosol transfer in a ventilated room

    International Nuclear Information System (INIS)

    Nerisson, Ph.

    2009-02-01

    When particulate radioactive contamination is likely to become airborne in a ventilated room, assessment of aerosol concentration in every point of this room is important, in order to ensure protection of operators and supervision of workspaces. Thus, a model of aerosol transport and deposition has been developed as part of a project started with IRSN, EDF and IMFT. A simplified Eulerian model, called 'diffusion-inertia model' is used for particle transport. It contains a single transport equation of aerosol concentration. The specific study of deposition on walls has permitted to develop a boundary condition approach, which determines precisely the particle flux towards the wall in the boundary layer, for any deposition regime and surface orientation.The final transport and deposition models retained have been implemented in a CFD code called Code-Saturne. These models have been validated according to literature data in simple geometries and tracing experiments in ventilated rooms, which have been carried out in 30 m 3 and 1500 m 3 laboratory rooms. (author)

  2. The Distributed Virtual Meeting Room Exercise

    NARCIS (Netherlands)

    Nijholt, Antinus; Zwiers, Jakob; Peciva, Jan; Vinciarelli, A.; Odobez, J-M.

    2005-01-01

    In this paper, we describe our research on distributed virtual meeting rooms. Starting point is our research on multi-party interaction, where the interaction may take place in real, augmented and virtual environments. Moreover, those that interact may be humans, human-controlled avatars,

  3. Enhancing training in the main control room

    International Nuclear Information System (INIS)

    McGuigan, K.; O'Leary, K.; Canavan, K.

    2004-01-01

    In 2003 Pickering B Nuclear of Ontario Power Generation installed a Desktop Simulator (DTS) in the Main Control Room (MCR) for training purposes. This paper will outline why this training enhancement was undertaken and the approach taken to secure its use in an active MCR environment while minimizing distractions to plant operations. (author)

  4. Developing control room operator selection procedures

    International Nuclear Information System (INIS)

    Bosshardt, M.J.; Bownas, D.A.

    1979-01-01

    PDRI is performing a two-year study to identify the tasks performed and attributes required in electric power generating plant operating jobs, and focusing on the control room operator position. Approximately 65 investor-owned utilities are participating in the study

  5. Review of operating room ventilation standards

    NARCIS (Netherlands)

    Melhado, M.D.A.; Hensen, J.L.M.; Loomans, M.G.L.C.

    2006-01-01

    This article reviews standards applied to operating room ventilation design used by European, South and North American countries. Required environmental parameters are compared with regard to type of surgery, and ventilation system. These requirements as well as their relation to infection control

  6. Challenges and solutions for realistic room simulation

    Science.gov (United States)

    Begault, Durand R.

    2002-05-01

    Virtual room acoustic simulation (auralization) techniques have traditionally focused on answering questions related to speech intelligibility or musical quality, typically in large volumetric spaces. More recently, auralization techniques have been found to be important for the externalization of headphone-reproduced virtual acoustic images. Although externalization can be accomplished using a minimal simulation, data indicate that realistic auralizations need to be responsive to head motion cues for accurate localization. Computational demands increase when providing for the simulation of coupled spaces, small rooms lacking meaningful reverberant decays, or reflective surfaces in outdoor environments. Auditory threshold data for both early reflections and late reverberant energy levels indicate that much of the information captured in acoustical measurements is inaudible, minimizing the intensive computational requirements of real-time auralization systems. Results are presented for early reflection thresholds as a function of azimuth angle, arrival time, and sound-source type, and reverberation thresholds as a function of reverberation time and level within 250-Hz-2-kHz octave bands. Good agreement is found between data obtained in virtual room simulations and those obtained in real rooms, allowing a strategy for minimizing computational requirements of real-time auralization systems.

  7. Room acoustic properties of concert halls

    DEFF Research Database (Denmark)

    Gade, Anders Christian

    1996-01-01

    A large database of values of various room acoustic parameters has provided the basis for statistical analyses of how and how much the acoustic properties of concert halls are influenced by their size, shape, and absorption area (as deduced from measured reverberation time). The data have been...

  8. Room for both qualification and inclusion?

    DEFF Research Database (Denmark)

    Ringskou, Lea Thomsen; Gravesen, David Thore

    2017-01-01

    Our research project concerns the work of leisure time pedagogues in the Danish primary school, more precisely the rooms and roles they practice in and construct. A reform in 2014 invited the pedagogues into a series of new activities and curriculum based school activities. Activities dominated...

  9. A Foot Operated Timeout Room Door Latch.

    Science.gov (United States)

    Foxx, R. M.; And Others

    1982-01-01

    This report describes the design and implementation of a foot operated timeout room door latch that permits staff members to maintain a misbehaving retarded individual in timeout without locking the door. Use of the latch also frees the staff member involved to record behavioral observations or reinforce appropriate behavior. (Author)

  10. Video Conferencing for a Virtual Seminar Room

    DEFF Research Database (Denmark)

    Forchhammer, Søren; Fosgerau, A.; Hansen, Peter Søren K.

    2002-01-01

    A PC-based video conferencing system for a virtual seminar room is presented. The platform is enhanced with DSPs for audio and video coding and processing. A microphone array is used to facilitate audio based speaker tracking, which is used for adaptive beam-forming and automatic camera...

  11. Guidelines on ergonomic aspects of control rooms

    Science.gov (United States)

    Mitchell, C. M.; Bocast, A. K.; Stewart, L. J.

    1983-01-01

    The anthropometry, workstation design, and environmental design of control rooms are outlined. The automated interface and VDTs and displays and various modes of communication between the system and the human operator using VDTs are discussed. The man in the loop is examined, the single controller single task framework and multiple controller multiple tasks issues are considered.

  12. Room temperature synthesis of biodiesel using sulfonated ...

    Science.gov (United States)

    Sulfonation of graphitic carbon nitride (g-CN) affords a polar and strongly acidic catalyst, Sg-CN, which displays unprecedented reactivity and selectivity in biodiesel synthesis and esterification reactions at room temperature. Prepared for submission to Royal Society of Chemistry (RSC) journal, Green Chemistry as a communication.

  13. Anticipating urgent surgery in operating room departments

    NARCIS (Netherlands)

    van der Lans, M.; Hans, Elias W.; Hurink, Johann L.; Wullink, Gerhard; van Houdenhoven, M.; Kazemier, G.

    2005-01-01

    Operating Room (OR) departments need to create robust surgical schedules that anticipate urgent surgery, while minimizing urgent surgery waiting time and overtime, and maximizing utilization. We consider two levels of planning and control to anticipate urgent surgery. At the tactical level, we study

  14. Tritium behavior intentionally released in the room

    International Nuclear Information System (INIS)

    Kobayashi, K.; Hayashi, T.; Iwai, Y.; Yamanishi, T.; Willms, R. S.; Carlson, R. V.

    2008-01-01

    To construct a fusion reactor with high safety and acceptability, it is necessary to establish and to ensure tritium safe handling technology. Tritium should be well-controlled not to be released to the environment excessively and to prevent workers from excess exposure. It is especially important to grasp tritium behavior in the final confinement area, such as the room and/or building. In order to obtain data for actual tritium behavior in a room and/or building, a series of intentional Tritium Release Experiments (TREs) were planned and carried out within a radiologically controlled area (main cell) at Tritium System Test Assembly (TSTA) in Los Alamos National Laboratory (LANL) under US-JAPAN collaboration program. These experiments were carried out three times. In these experiments, influence of a difference in the tritium release point and the amount of hydrogen isotope for the initial tritium behavior in the room were suggested. Tritium was released into the main cell at TSTA/LANL. The released tritium reached a uniform concentration about 30 - 40 minutes in all the experiments. The influence of the release point and the amount of hydrogen isotope were not found to be important in these experiments. The experimental results for the initial tritium behavior in the room were also simulated well by the modified three-dimensional eddy flow analysis code FLOW-3D. (authors)

  15. Reducing start time delays in operating rooms

    NARCIS (Netherlands)

    Does, R.J.M.M.; Vermaat, T.M.B.; Verver, J.P.S.; Bisgaard, S.; van den Heuvel, J.

    2009-01-01

    Problem: Health care today is facing serious problems: quality of care does not meet patients’ needs and costs are exploding. Inefficient utilization of expensive operating rooms is one of the major problems in many hospitals worldwide. A benchmark study of 13 hospitals in the Netherlands and

  16. Perception of Reverberation in Small Rooms

    DEFF Research Database (Denmark)

    Kaplanis, Neofytos; Bech, Søren; Jensen, Søren Holdt

    summarises the current literature following a top-down approach. It identifies the perceptual aspects of reverberation and attempts to establish links to physical measures, focussing on small rooms. Results indicate that the current acoustical metrics often have limited correlation to the perceptual...

  17. Room-temperature antiferromagnetic memory resistor.

    Science.gov (United States)

    Marti, X; Fina, I; Frontera, C; Liu, Jian; Wadley, P; He, Q; Paull, R J; Clarkson, J D; Kudrnovský, J; Turek, I; Kuneš, J; Yi, D; Chu, J-H; Nelson, C T; You, L; Arenholz, E; Salahuddin, S; Fontcuberta, J; Jungwirth, T; Ramesh, R

    2014-04-01

    The bistability of ordered spin states in ferromagnets provides the basis for magnetic memory functionality. The latest generation of magnetic random access memories rely on an efficient approach in which magnetic fields are replaced by electrical means for writing and reading the information in ferromagnets. This concept may eventually reduce the sensitivity of ferromagnets to magnetic field perturbations to being a weakness for data retention and the ferromagnetic stray fields to an obstacle for high-density memory integration. Here we report a room-temperature bistable antiferromagnetic (AFM) memory that produces negligible stray fields and is insensitive to strong magnetic fields. We use a resistor made of a FeRh AFM, which orders ferromagnetically roughly 100 K above room temperature, and therefore allows us to set different collective directions for the Fe moments by applied magnetic field. On cooling to room temperature, AFM order sets in with the direction of the AFM moments predetermined by the field and moment direction in the high-temperature ferromagnetic state. For electrical reading, we use an AFM analogue of the anisotropic magnetoresistance. Our microscopic theory modelling confirms that this archetypical spintronic effect, discovered more than 150 years ago in ferromagnets, is also present in AFMs. Our work demonstrates the feasibility of fabricating room-temperature spintronic memories with AFMs, which in turn expands the base of available magnetic materials for devices with properties that cannot be achieved with ferromagnets.

  18. Operating Room Fires and Surgical Skin Preparation.

    Science.gov (United States)

    Jones, Edward L; Overbey, Douglas M; Chapman, Brandon C; Jones, Teresa S; Hilton, Sarah A; Moore, John T; Robinson, Thomas N

    2017-07-01

    Operating room fires are "never events" that remain an under-reported source of devastating complications. One common set-up that promotes fires is the use of surgical skin preparations combined with electrosurgery and oxygen. Limited data exist examining the incidence of fires and surgical skin preparations. A standardized, ex vivo model was created with a 15 × 15 cm section of clipped porcine skin. An electrosurgical "Bovie" pencil was activated for 2 seconds on 30 Watts coagulation mode in 21% oxygen (room air), both immediately and 3 minutes after skin preparation application. Skin preparations with and without alcohol were tested, and were applied with and without pooling. Alcohol-based skin preparations included 70% isopropyl alcohol (IPA) with 2% chlorhexidine gluconate, 74% IPA with 0.7% iodine povacrylex, and plain 70% IPA. No fires occurred with nonalcohol-based preparations (p fires occurred in 38% (23 of 60) at 0 minutes and 27% (16 of 60) at 3 minutes. Alcohol-based skin preparations fuel operating room fires in common clinical scenarios. Following manufacturer guidelines and allowing 3 minutes for drying, surgical fires were still created in 1 in 10 cases without pooling and more than one-quarter of cases with pooling. Surgeons can decrease the risk of an operating room fire by using nonalcohol-based skin preparations or avoiding pooling of the preparation solution. Published by Elsevier Inc.

  19. Intraoperative and recovery room outcome | Edomwonyi | East ...

    African Journals Online (AJOL)

    Objectives: To identify and quantitate anaesthesia related complications in the intraoperative period and in the post anaesthesia recovery room. Design: A prospective study. Setting: University of Benin Teaching Hospital; a University - affiliated tertiary centre. Subjects: Patients scheduled for elective and emergency surgery ...

  20. Petrographical and geochemical characterization and deformation conditions of the San Cristobal pluton, Sierra de Velasco, La Rioja, Argentina; Caracterizacion petrografica y geoquimica y condiciones de deformacion del pluton San Cristobal, Sierra de Velasco, La Rioja, Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Bellos, L.I.; Toselli, A.J.; Rossi, J.N.; Grosse, P.; Rosa, J.D. de la; Castro, A.

    2010-07-01

    The San Cristobal pluton is a 35 km2 granitic body that outcrops at the southestern tip of the Sierra de Velasco, located west of La Rioja city, Argentina. It is formed by monzogranites and syenogranites, together with scarce granodiorites, with medium to fine-grained, equigranular to slightly porphyritic textures. Their mineral assemblage consists of quartz + microcline + plagioclase + biotite {+-} muscovite + zircon + apatite + magnetite. The granite contains dioritic to tonalitic mafic enclaves. The central and eastern parts of the granite have been deformed by the NNW-SSE trending South Mylonitic shear zone formed by mylonitic rocks. The metamorphic host-rock is represented by scarce greenschist facies xenoliths and hornfels with the high T/P assemblage K-feldspar - cordierite - biotite {+-} sillimanite. The granites are calc-alkaline, weak- to moderately peraluminous, and formed as part of a continental magmatic arc developed along the active margin of western Gondwana during the Early Paleozoic. The depth of emplacement of the San Cristobal pluton is estimated at {approx}12 km. (Author).

  1. Characterization of Magnetic Field Immersed Photomultipliers from Double Chooz Experiment. Design and Construction of their Magnetic Shields; Caracterizacion de los fotomultiplicadores del experimento Double Chooz bajo campo magnetico y diseno y construccion de sus blindajes magneticos

    Energy Technology Data Exchange (ETDEWEB)

    Valdivia Valero, F. J.

    2007-12-28

    Flavour oscillations of neutrinos are a quantum-mechanical effect widely demonstrated. It is explained through interferences of their mass eigenstates, therefore, belonging to the physical area beyond the Standard Model. This work deals with the CIEMAT collaboration in the neutrino experiment Double Chooz. Such an experiment aims to measure the mixture angle {theta}{sub 1}3, one of the PMNS leptonic mixture matrix, with a un reached-before sensibility by decrease of systematic errors. For this, two identical scintillator detectors, equipped with PMT's, will be sited at different distances from two reactors located in the nuclear power plant CHOOZ B (France). The electronic neutrino flux from these reactors will be compared, explaining its deficit by flavour oscillations of these particles. The identity of both detectors will be diminished by the magnetic field effects on the PMT's response. Therefore, this study serves as for quantifying such an effects as for fitting the magnetic shields design that minimize them. Shielding measurements and final design of magnetic shields as much as the effect these ones cause in the PMT's response immersed in a monitored magnetic field are presented. (Author) 85 refs.

  2. Characterization of Magnetic Field Immersed Photomultipliers from Double Chooz Experiment. Design and Construction of their Magnetic Shields; Caracterizacion de los fotomultiplicadores del experimento Double Chooz bajo campo magnetico y diseno y construccion de sus blindajes magneticos

    Energy Technology Data Exchange (ETDEWEB)

    Valdivia Valero, F J

    2007-12-28

    Flavour oscillations of neutrinos are a quantum-mechanical effect widely demonstrated. It is explained through interferences of their mass eigenstates, therefore, belonging to the physical area beyond the Standard Model. This work deals with the CIEMAT collaboration in the neutrino experiment Double Chooz. Such an experiment aims to measure the mixture angle {theta}{sub 1}3, one of the PMNS leptonic mixture matrix, with a un reached-before sensibility by decrease of systematic errors. For this, two identical scintillator detectors, equipped with PMT's, will be sited at different distances from two reactors located in the nuclear power plant CHOOZ B (France). The electronic neutrino flux from these reactors will be compared, explaining its deficit by flavour oscillations of these particles. The identity of both detectors will be diminished by the magnetic field effects on the PMT's response. Therefore, this study serves as for quantifying such an effects as for fitting the magnetic shields design that minimize them. Shielding measurements and final design of magnetic shields as much as the effect these ones cause in the PMT's response immersed in a monitored magnetic field are presented. (Author) 85 refs.

  3. Characterization of the malignity of tumors in the central nervous system utilizing the correlation dimension analysis; Caracterizacion de la malignidad de tumores del sistema nervioso central utilizando analisis de dimension de correlacion

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, D.; Zambrano, C.; Martin L, M. [Departamento de Fisica y Centro de Resonancia Magnetica. Facultad de Ciencias, Universidad Central de Venezuela, A.P. 47586, Caracas 1041-A (Venezuela)

    1998-12-31

    In the present work it is proposed a method for the characterization of the irregularities present in the edges of malignant leisure of central nervous system over axial images generated through Nuclear magnetic Resonance by images. Through the use of techniques of digital images processing was possible to locate, extract and generate temporal series. These temporal series were utilized using the correlation dimension concept for producing a parameter which takes different values depending of the leisure type. It is demonstrated that this type of analysis suffers in a very acceptable form independently of the errors which can be generate by the fact that in the practice of temporal series obtained they are composed by a reduced number of points. (Author)

  4. Synthesis and characterization of alanine boron hydrate for its use in thermal neutron dosimetry.; Sintesis y caracterizacion del borohidrato de alanina para su uso en dosimetria de neutrones termicos.

    Energy Technology Data Exchange (ETDEWEB)

    Yanez S, J C

    1994-07-01

    Alanine boron hydrate was synthesized for its possible use as intercomparison dosimeter for thermal neutron irradiation. The irradiations were performed in the Nuclear Reactor of the Nuclear Center of Mexico. The salt was prepared by reacting alanine and boric acid in a (1:1) stoichiometric ratio in neutral pH 7.5 aqueous solution and also in a basic pH 13 solution. The latter reaction was prepared with the addition of ammonia hydroxide (25%). Solutions were stirred and afterwards were let to evaporate. The obtained product in each reaction is a white solid. Dosimeters were prepared with the obtained reaction products and irradiated under thermal neutron flux of 5 x 10{sup 7} n/cm{sup 2} s. For 30 hours. The analysis of irradiated samples was made in a Variant E-15 Electron Paramagnetic Resonance spectrometer. The observed response of the samples prepared with the reaction product at the basic pH is approximately 50% higher than the neutral pH samples. In order to investigate the optimum signal enhancement samples were prepared in a basic pH medium in the following stoichiometric ratios: (1:0.5); (1:0.75); (1:1.25); (1:1.5) and (1:1.75). It was observed that the samples of the reaction (1:0.75) produced the higher response. The response was 2728% higher than the alanine only dosimeters. The reaction product was chemically characterized by X-ray diffraction, Nuclear Magnetic Resonance, Chromatography, Refractometry and Solubility tests. Results indicate that alanine boron hydrate is formed in basic media and in a stoichiometric ratio (1:0.75). The dosimetric characterization of alanine boron hydrate was performed, results are reported. It is concluded that alanine boron hydrate may be a good intercomparison dosimeter for thermal neutron irradiation. (Author).

  5. Management system information of characterization of the dismantling project of Jose Cabrera; Sistema de Gestion de la informacion de caracterizacion del proyecto de desmantelamiento de la CN Jose Cabrera

    Energy Technology Data Exchange (ETDEWEB)

    Gimeno Blesa, M. E.; Martin Palomo, N.; Gomez Rodriguez, C. A.

    2011-07-01

    In the proposed dismantling and decommissioning of the Jose Cabrera NPP is designed and implemented a database of physical and radiological inventory, which provides a powerful tool to optimize the storage, monitoring and control of the characterization data. The database is a useful and reliable management system characterization information that facilitates access and information processing, and ensures their integrity and traceability along of the dismantling project.

  6. Interface for the Characterisation and Modelling of the Environmental and Sanitary Situation Around the Huelva Estuary (Conta HUELVA); Interfaz para la Caracterizacion y Modelizacion de la Situacion Ambiental y Sanitaria del Entorno de la Ria de Huelva (Conta HUELVA)

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Giralda, C.; Bailador Ferreras, M. de la A.

    2002-07-01

    This Technical Report shows a Computer solution whose main objective is the Atmospheric Contamination Characterisation using two ways. One way is by means of extracting the emission, inmision and meteorological parameters in order to group them following temporal and statistical criteria By other way, you can obtain information from the database accords to a predefined format that allows the Atmosphere Contamination Modelization though the calculus of its spatial and temporal evolution. (Author)

  7. Mechanical and Radiological Characterization of Different parts of an Irradiation Coolant Channel Tube from Atucha I Nuclear Plant; Caracterizacion Mecanica y Radiologica de Partes de Canales Refrigerantes Irradiados Extraidos del Reactor de la Central Nuclear Atucha I

    Energy Technology Data Exchange (ETDEWEB)

    Piquin, Ruben [Instituto Balseiro, Universidad Nacional de Cuyo, Centro Atomico Bariloche, Universidad Nacional de Mar del Plata (Argentina)

    2001-07-01

    The widespread replacement of reactor internals has generated a substantial volume of active material. It is essential to work with these components at least in a partial way before the next planned stop, which will take place during the second semester of the year 2002. Due to the fact that the reactor internals pool and the storage pool for irradiated nuclear fuel have limited capacities, it has been proposed to compact an experimental shift of 50 irradiated coolant channels, that are currently placed in storage pools. Basically the processed waste will be put in baskets at the bottom pools.The alternative choice proposes to divide an irradiation coolant channel tube into different parts: stainless steel section, zircaloy-4 section and stainless steel section with hardened zones with cobalt alloys named Estelite-6. The person in charge has already planned the constructive and operative solutions but the mechanical characterization of the different parts of the channel tube is necessary in order to dimension the compaction tool needed for the semi-industrial installation.In the present special report, two well-differentiated actions will be described. The necessary compacted strength of the irradiation coolant channel tube will be estimated for the stainless steel section and the zircaloy-4 section starting from experiment with unirradiated material and considering effects of radiation damage and hydrides on the ductility.These results will be used to design the necessary compacted tools for the semi-industrial installation. The necessary equipment for the radiological characterization of the different material sections already specified will be described and the most important emitting particles of radiation that could be detected will be mentioned. Also the decontamination process to use including the radiological characterization of every stage of the process will be described in order to establish the decontamination factor. Finally the most important radioactive elements than will remain after the decontamination in the different sections of the channel tube will be estimated with the purpose of establishing the type of end waste.

  8. Qualitative characterization of free polyamines in ethyleneamines epoxide hardeners by nuclear magnetic resonance spectroscopy; Caracterizacion cualitativa de poliaminas libres en endurecedores de resinas epoxidicas del tipo etilenaminas por espectroscopia de resonancia magnetica nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Garcia, Filiberto [Universidade Federal de Itajuba (UNIFEI), MG (Brazil); Miguez, Eduardo; Tavares, Maria Ines B. [Universidade Federal do Rio de Janeiro (UFRJ/IMA), RJ (Brazil). Inst. de Macromoleculas Professora Eloisa Mano

    2008-01-15

    The qualitative characterization of two commercial ethyneamines epoxide hardeners marketed by ACROS (U.S.A.) was carried out by using carbon-13 nuclear magnetic resonance spectroscopy. The products were triethylenetetramine (TETA) and tetraethylenepentamine (TEPA). TETA had four components, the most important one being triethylenetetramine, an ethyleneamine of lineal structure, in a concentration of 60 mol%. Another component had ramified structure, while the other two exhibited recurrent structures of the piperazina type. TEPA had five components with similar structures. The major component was tetraethylenepentamine in an approximate concentration of 55 mol%. These results agree with the composition of similar products marketed by Dow Chemical Company, namely DEH 24 and DEH 26, respectively. (author)

  9. Characterization of sludges of La Golondrina WWTP: sludges as final containers of the domestic wastewater pollution; Caracterizacion de fangos de la EDAR La Golondrina (EMACSA-Cordoba): su funcion como receptores finales de la contaminacion del agua residual urbana

    Energy Technology Data Exchange (ETDEWEB)

    Marin Galvin, R.; Alonso Perez de siles, L.; Rojas Moreno, F. J.

    2005-07-01

    Treatment of wastewater is to concentrate the original pollution in a by-product: the wastewater sludge or bio-solid. As example, La Golondrina WWTP (Cordoba-spain) promotes the production of 1,3 kg of sludge per m''3 of wastewater, yielding logically a treated water according to laws. Furthermore, the treatment process there applied reduces the levels of nine majority metals (Cu, Fe, Mn, Pb, Cd, Ni, Cr, Zn, Hg) from 2,72 mg/l to 1.42 mg/l in the treated water, generating almost, a sludge agrees with the spanish normative to sludge intended to agricultural use (its main fate). Summarizing, the treatment of wastewater supposes the concentration of the original biodegradable load into the sludge around 340 times, while metals exhibited a different concentration degree for each one (from 10.000 times for Fe, u pto 1-2 times for Cd and Hg). Finally, the concentration degree of a metal in the sludge is mainly led by the removed concentration of metal in the treatment process, and after, by the original concentration of metal in the influent wastewater. (Author) 24 refs.

  10. Logging as a means of characterising the water in rock formations in groundwater collection borings; Utilizacion de diagrafias para la caracterizacion del agua de la formaciones en sondeos de captacion de aguas subterranea

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Curiel, J.M.; Miguel, M.J.; Dominguez, S.; Caparrini, N

    1998-12-01

    We present an improvement of the S.P. application to obtain water conductivity and total of dissolved solids in the permeable layers passed through open hole, supposing said levels completely water saturated (under phreatic level). The optimization consists of a methodology for the treatment and interpretation of S.P. logs as well as the development of computer codes to execute the following processes. Laboratory measurements to acquire a set of key values in the interpretation processes (R{sub w}e/R{sub w} and TDS/R{sub w}). Conversion of the obtained data and selected charts, with continuous application range, to analytical curves for their automatic procedure. Algorithms development in order to carry out the automatic determination of base line and the elimination of its displacements. This system have been applied over a set of 27 logs performed by the author in the south area of the Duero basin (Spain) as an example of multi-layered detrital. We show the conductivity and TDS results in comparison with the water analysis obtained through pumping. (Author) 30 refs.

  11. Characterization of welding of AISI 304l stainless steel similar to the core encircling of a BWR reactor; Caracterizacion de soldaduras de acero inoxidable AISI 304L similares a las de la envolvente del nucleo de un reactor BWR

    Energy Technology Data Exchange (ETDEWEB)

    Gachuz M, M.E.; Palacios P, F.; Robles P, E.F. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    Plates of austenitic stainless steel AISI 304l of 0.0381 m thickness were welded by means of the SMAW process according to that recommended in the Section 9 of the ASME Code, so that it was reproduced the welding process used to assemble the encircling of the core of a BWR/5 reactor similar to that of the Laguna Verde Nucleo electric plant, there being generated the necessary documentation for the qualification of the one welding procedure and of the welder. They were characterized so much the one base metal, as the welding cord by means of metallographic techniques, scanning electron microscopy, X-ray diffraction, mechanical essays and fracture mechanics. From the obtained results it highlights the presence of an area affected by the heat of up to 1.5 mm of wide and a value of fracture tenacity (J{sub IC}) to ambient temperature for the base metal of 528 KJ/m{sup 2}, which is diminished by the presence of the welding and by the increment in the temperature of the one essay. Also it was carried out an fractographic analysis of the fracture zone generated by the tenacity essays, what evidence a ductile fracture. The experimental values of resistance and tenacity are important for the study of the structural integrity of the encircling one of the core. (Author)

  12. Chemical and mineralogical characterization of two commercial cements and its evolution in function of time; Caracterizacion quimica y mineralogica de dos cementos comerciales y su evolucion en funcion del tiempo

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez B, O.

    2014-07-01

    Mineralogical evolution of Portland cement is studied during hydration process using materials characterization techniques as X-ray diffraction (XRD) and scanning electron microscopy (Sem) in order to analyze the changes in the various cement minerals as alite, belite, celite, during processing to the hydrated phases of tobermorite gel, portlandite and ettringite, respectively, in the cement paste setting at different ages (3, 7 and 28 days). It was found that the hydration process occurs differently in each mineral because of their reaction rates or changes they experience in their crystals during processing of anhydrous to hydrated phase. You may notice changes in the appearance of the dough as you go hydration and the formation of tobermorite gel, portlandite and ettringite. (Author)

  13. Characterization of the electrochemical behavior of coating by steel welding 308l and in presence of noble metals deposits; Caracterizacion del comportamiento electroquimico de recubrimiento por soldadura de acero 308L y en presencia de depositos de metales nobles

    Energy Technology Data Exchange (ETDEWEB)

    Piedras, P.; Arganis J, C. R., E-mail: pedro.piedras@hotmail.es [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    In this work the oxide deposits and noble metals deposit were characterized (Ag and Pt) on a coating of stainless steel 308l that were deposited by the shield metal arc welding (SMAW) on steel A36 by means of scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction. The extrapolation of Tafel technique was also used to obtain the corrosion potential (Ec) for the pre-rusty steel and for the samples with deposits of Pt and Ag under conditions of hydrogen water chemistry (HWC), demonstrating that this parameter diminishes with the presence of this deposits. (Author)

  14. Characterization and adjustment of the neutron radiography facility of the RP-10 nuclear reactor; Caracterizacion y puesta a punto de la facilidad de neutrografia del reactor nuclear RP-10

    Energy Technology Data Exchange (ETDEWEB)

    Ravello R, Y R

    2001-07-01

    The main aim of this work was to characterize and adjust the neutron radiography facility of the RP-10 nuclear reactor, and therefore be able to offer with this technique services to the industry and research centers in general. This technique will be complemented with others such as x-rays and gamma radiography. First, the shielding capacity of the facility was analyzed, proving that it complies with the radiological safety requirements established by the radiological safety code. Then gamma filtration tests were conducted in order to implement the direct method for image formation, optical density curves were built according to the thickness of the gamma filter, the type of film and the type of irradiation. Also, the indirect method for image formation was implemented for two types of converters: indium and dysprosium. Growth curves for optical density were also made according to contact time between converter-film, for different types of films. The resolution of the facility was also analyzed using two methods: Klasens (1946) and Harms (1986). Harms method came closer to the resolution of the human eye when compared to the Klasens method. Finally, the application fields of neutron radiography are presented, including those conducted at the neutron radiography facility of the RP-10 nuclear reactor. With this work, the RP-10 neutron radiography facility is ready to offer inspection and research services.

  15. Characterization of the malignity of tumors in the central nervous system utilizing the correlation dimension analysis; Caracterizacion de la malignidad de tumores del sistema nervioso central utilizando analisis de dimension de correlacion

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, D; Zambrano, C; Martin L, M [Departamento de Fisica y Centro de Resonancia Magnetica. Facultad de Ciencias, Universidad Central de Venezuela, A.P. 47586, Caracas 1041-A (Venezuela)

    1999-12-31

    In the present work it is proposed a method for the characterization of the irregularities present in the edges of malignant leisure of central nervous system over axial images generated through Nuclear magnetic Resonance by images. Through the use of techniques of digital images processing was possible to locate, extract and generate temporal series. These temporal series were utilized using the correlation dimension concept for producing a parameter which takes different values depending of the leisure type. It is demonstrated that this type of analysis suffers in a very acceptable form independently of the errors which can be generate by the fact that in the practice of temporal series obtained they are composed by a reduced number of points. (Author)

  16. The Guadiamar soils: characterization and evolution of soils affected by the pyrite sludge; Los suelos del Guadiamar: estudios de caracterizacion y de la evolucion de los suelos contaminados por el lodo

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, C.; Anton-Pacheco, C.; Barettino, D.; Lopez Pamo, E. [Instituto Geologico y Minero de Espana. Madrid (Spain); Cabrera, F.; Fernandez, J. E.; Giron, I. F.; Moreno, F. [Instituto de Recursos Naturales y Agrobiologia de Sevilla (Spain); Fernandez, A. M.; Garcia-Gutierrez, M.; Pelayo, M.; Rivas, P.; Villar, M. V. [Ciemat. Madrid (Spain); Giraldez, J. V.; Vanderlinden, K. [Universidad de Cordoba (Spain); Ordonez, R. [CIFA. Cordoba (Spain)

    2001-07-01

    The study of the geochemical background shows the evidence of high contents in heavy metals in the soils from the affected area of the Guadimar basin before the Aznalcollar mine spill. This means a previous contamination due to the Aznalcollar mineralizations, and above all, to the intense mining works of the last two decades. Two areas been defined, with different geochemical background: Guadiamar alluvial soils and soils over the marsh deposits in the southern area of the affected zone. These southern soils have, higher contents of iron, zinc and copper and slightly lower of lead and arsenic, compared to the contents from the alluvial. The soils of the affected area of the Guadiamar basin are quite heterogeneous and show a high spatial variability of its physical and mineralogical characteristics. Once the sludge removal operations are finished, a high spatial variability of the concentration of soils of different elements related to the contamination has been observed. This variability is observed at a very small scale, so that in a few metres this concentrations vary in some order of magnitude. This variability is also related to the remnant sludge, because the cleanup did not remove the whole of the mining waste, and this remaining part has been incorporated to the soils during the soil remediation operations. At a basin scale, an important increase of the contaminant concentrations has been observed in the upper part of the soils. This concentration mean values are from 3 to 6 times the geochemical background levels, depending on the element considered. These increase are higher for zinc, and lower for lead, arsenic and copper, in that order. The concentrations of these elements in soils decrease with the depth. The highest concentrations for arsenic and lead were observed in the zone where the pyritic sludge was deposited, whereas the highest zinc concentrations are determined in the southern part, where the acid water were retained. After the soil remediation works it has been observed that the pH is increasing as time goes by the different soil horizones, and the heavy metals availability decreases. The adsorption/desorption tests on columns of 5 representative soils show that manganese and zinc are the only metals not fully adsorbed, as the are present in concentrations above the soil retaining capacity. The leaching tests show that at a pH of 8, the contaminants are adsorbed by the soil, with the exception of arsenic and zinc. Zinc is leached but kept in the next soil centimetres. The natural drainage waters collected in the lysimeters installed in the affected area contained zinc, copper, iron, manganese and cobalt, as well as sulphates and phosphates. (Author) 37 refs.

  17. Characterization of archaeological ceramics from the north western lowland Maya Area, using the technique of neutron activation analysis; Caracterizacion de ceramicas arqueologicas de las tierras bajas noroccidentales del Area Maya, empleando la tecnica de activacion neutronica

    Energy Technology Data Exchange (ETDEWEB)

    Lopez R, M. C.; Tenorio, D.; Jimenez R, M. [ININ, Carretera Mexico-Toluca s/n, Ocoyoacac 52750, Estado de Mexico (Mexico); Terreros, E. [Museo del Templo Mayor, INAH, Seminario No. 8, Col. Centro, Mexico 06060, D. F. (Mexico); Ochoa, L. [UNAM, Instituto de Investigaciones Antropologicas, Circuito Exterior s/n, Ciudad Universitaria, Mexico 04510, D. F. (Mexico)

    2008-07-01

    It is a study on 50 samples of ceramics from various archaeological sites of the north western lowland Maya Area. This study was performed by neutron activation analysis of 19 chemical elements and the treatments relevant statistical data. Significant differences were found among the pieces that led to group them into five major groups, the difference is the site of their manufacture and therefore in the raw materials used for this. (Author)

  18. Is the characterisation of the total nitrogen in industrial waste water always correct? Study of a case; Es siempre correcta la caracterizacion del nitrogeno total en las aguas residuales industriales?. Estudio de un caso

    Energy Technology Data Exchange (ETDEWEB)

    Torrijos, M.; Carrera, J.; Lafuente, J. [Universitat Autonoma de Barcelona (Spain)

    2003-07-01

    This paper intends to advise about the possibility of wrong industrial wastewater characterisations related to the Total Kjeldahl Nitrogen (TKN), in order to avoid inaccurate design and management of the system. During the study of the high strength nitrogen removal process in a pharmaceutical wastewater treatment plant, an abnormality was observed in the nitrogen mass balance of the system. The most popular method for TKN determination was modified in order to assess properly the TKN of the effluent. This modification has demonstrated that there are some organic nitrified compounds with complex structure that cannot be completely chemically hydrolysed. This could be the reason for wrong characterisations in industrial wastewaters with similar compounds. (Author) 6 refs.

  19. Microstructural characterization of TiAl{sub 3} intermetallic obtained by the Fast solidification technique; Caracterizacion microestructural del intermetalico TiAl{sub 3} obtenida por la tecnica de solidificacion rapida

    Energy Technology Data Exchange (ETDEWEB)

    Angeles C, C.; Rosas, G.; Perez C, R. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    In this work preliminary studies about the TiAl{sub 3} characterization are reported which is obtained starting from the Fast solidification technique in an arc furnace using Scanning electron microscopy, X-ray diffraction and Transmission electron microscopy. (Author)

  20. Development and characterization of copper base composite materials strengthened with TiB{sub 2} particles; Desarrollo y caracterizacion del material compuesto de base cobre reforzado con ceramicas intermetalicas de TiB{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, M.; Camurri, C.; Corredor, D.; Jimenez, J. A.

    2005-07-01

    In this work, mechanical and electrical properties of copper base composites alloys strengthened by dispersed TiB{sub 2} particles are characterized. Powders of copper and TiB{sub 2} were mechanically ball milled in a planetary mill during 12 and 36 h under a protective atmosphere of argon. Resulting powders were compacted uniaxially at 923 K under 90 MPa during 2 h. Part of these compacts were hot rolled at temperatures ranging between 1073 and 1023 K with 20% reduction. Comparing the properties of materials after this thermomechanical process with that of as-consolidated, it was observed an electrical conductivity increase, and a decrease on hardness and ductility. (Author) 6 refs.

  1. CARACTERIZACION CITOGENÉTICA POR BANDAS R-REPLICATIVAS DE LA GUAGUA DE COLA (DYNOMIS BRANICKII CYTOGENETIC CHARACTERIZATION WITH R-REPLICATIVE BANDS OF TAIL GUAGUA (DYNOMIS BRANICKII

    Directory of Open Access Journals (Sweden)

    Lisbeth Katherine Ureña Vargas

    2010-06-01

    Full Text Available La Dinomys branickii llamada guagua de cola ó “Pacarana”, es el segundo roedor más grande del mundo. Debido a factores antrópicos este roedor se encuentra en peligro de extinción. De acuerdo a su pelaje y tamaño se ha propuesto la existencia de tres subespecies: D. pacarana en Brasil, D. gigas en Colombia y D. branickii occidentalis en Ecuador y Colombia. A pesar de que se han hecho valoraciones morfológicas no existen estudios citogenéticos detallados que permitan determinar si las tres subespecies tienen el mismo cariotipo. El presente trabajo tuvo como objetivo determinar el cariotipo de la especie Dynomis branickii usando bandeo cromosómico R-replicativo mediante la incorporación de 5-Bromo 2´deoxi-Uridina (BrdU. Los resultados citogenéticos mostraron un número cromosómico 2n=64 y un número fundamental NF=98. El hallazgo del cariotipo se presentó en tres grupos: el A con 1 par metacéntrico y 11 pares de cromosomas submetacéntricos, el B con 5 pares metacéntricos, el C con 14 pares subtelocéntricos y el par sexual XY, donde el X es submetacéntrico y el Y subtelocéntrico. El idiograma se construyó tomando metafases localizadas en estadio III de replicación. El bandeo R-replicativo reveló el carácter inactivo del cromosoma X suplementario como se observa en otras hembras de mamíferos; de otra parte, el cromosoma Y resultó ser el más pequeño del genoma y de replicación tardía. Con este resultado se estudia por primera vez el cariotipo y el idiograma de esta especie y servirá de base para compararlo con futuros estudios de las otras subespecies estudiadas.Dinomys branickii is also called tail guagua or “Pacarana”, is the second biggest living rodent of the world. Due to man factors this rodent is actually endangered. According to hair colour and height have been proposed the existence of three subspecies: Dinomys pacarana in Brasil, Dinomys gigas in Colombia and Dinomys branickii occidentalis in Ecuador and

  2. Modern control room design experience and speculation

    International Nuclear Information System (INIS)

    Smith, J.E.

    1993-01-01

    Can operators trained to use conventional control panels readily adapt to CRT based control rooms? Does automation make the design of good man-machine interfaces more or less difficult? In a conventional, hard-wired control room is the operator's peripheral vision always an asset and how can one do better in a CRT based control room? Are Expert System assisted man-machine interfaces a boon or a bust? This paper explores these questions in the light of actual experience with advanced power plant control environments. This paper discusses how automation has in fact simplified the problem of ensuring that the operator has at all times a clear understanding of the plant state. The author contends that conventional hard-wired control rooms are very poor at providing the operator with a good overview of the plant status particularly under startup, or upset conditions and that CRT-based control rooms offer an opportunity for improvement. Experience with some early attempts at this are discussed together with some interesting proposals from other authors. Finally the paper discusses the experience to date with expert system assisted man-machine interfaces. Although promising for the future progress has been slow. The amount of knowledge research required is often formidable and consequently costly. Often when an adequate knowledge base is finally acquired it turns out to be better to use it to increase the level of automation and thus simplify the operator's task. The risks are not any greater and automation offers more consistent operation. It is important also to carefully distinguish between expert system assisted display selection and expert system operator guidance. The first is intended to help the operator in his quest for information. The second attempts to guide the operator actions. The good and the bad points of each of these approaches is discussed

  3. Characterization and heading of irradiated fuels and their chemical analogs; Caracterizacion y lixiviacion de combustibles nucleares irradiados y de sus analogos quimicos

    Energy Technology Data Exchange (ETDEWEB)

    Serrano, J A [Ciemat.Madrid (Spain)

    2000-07-01

    This work presents results of leaching experiments under deionized water and under synthetic granite at room temperature in air using spent fuel (UO{sub 2} and MOX LWR fuels) and the chemical analogues, natural UO{sub 2} and SIMFUEL. The experimental conditions and procedure for irradiated and non-irradiated materials were kept similar as much as possible. Also dissolution behaviour studies of preoxidised LWR UO{sub 2} and MOX spent fuel up to different on the oxidation degree. For both fuel types, UO{sub 2} and MOX, the fission products considered showed a fractional release normalised to uranium higher than 1, due to either the larger inventory at preferential leaching zones, such as, grain boundaries or to the inherent higher solubility of some of these elements. In contrast to fission products, the fractional release of PU from the UO{sub 2} fuel was not affected by the oxidation level. Finally a thermodynamic study of the experimental leaching results obtained in this work was performed. (Author)

  4. Acerca del moho

    Science.gov (United States)

    El moho forma parte del medio ambiente natural. Afuera del hogar, el moho juega un papel en la naturaleza al desintegrar materias organicas tales como las hojas que se han caido o los arboles muertos. El moho puede crecer adentro del hogar cuando las espor

  5. Del bit al qubit

    OpenAIRE

    Torras Font, Josep

    2011-01-01

    Aquest document pretén donar una visió del desenvolupament dels computadors electrònics i dels components que els han fet possibles. Dintre de les opcions de futur en computació, també intenta donar una visió de les bases en que es fonamenta la computació quàntica.

  6. Room climate in large historical rooms. Raumklima in grossen historischen Raeumen; Heizungsart, Heizungsweise, Schadensentwicklung, Schadensverhinderung

    Energy Technology Data Exchange (ETDEWEB)

    Arendt, C

    1993-01-01

    The effects of different types of heating systems in large historical rooms on the room climate, the building and (to some extent) on humans are investigated. Starting from a theoretical analysis and available experimental reports, suitable objects (churches, theatres, festival and assembly halls) were selected in which a number of parameters were measured. From the results criteria were established for judging the different types of heating systems. (BWI). 181 figs.

  7. As intervenções do enfermeiro e as complicações em sala de recuperação pós-anestésica Las intervenciones del enfermero y las complicaciones en la sala de recuperación postanestésica Nurse interventions and the complications in the post-anesthesia recovery room

    Directory of Open Access Journals (Sweden)

    Débora Cristina Silva Popov

    2009-12-01

    oxigenoterapia; hipotensión: hidratación, exámenes complementares y observación; hipertensión: observación; tremor: manta térmica, transfusión sanguínea; náuseas/vómitos: rutina, medicación y sondaje vesical de alivio; hemorragia: rutina, medicación y curativos; hipoxemia: rutina y oxigenoterapia; hipotermia: rutina, manta térmica y medicación. El dolor, náuseas/vómitos, agitación y hemorragia obtuvieron relación estadísticamente significativa con el enfermero fijo en SRPA.The objective of this study was to identify the prevalent complications in the post-anesthesia recovery room (PARR, and correlate nurses' work hours with the complications. The sample consisted of 400 records of patients older than 18 years, who had major and medium surgical procedures, admitted at the PARR unit, with a stay of at least one hour. The prevalent complications were pain and hypothermia. The following complications showed a statistically significant relationship with the nursing intervention: pain: routine, oxygen therapy, medication and bandages; agitation/anxiety: routine and oxygen therapy; hypotension: hydration, complementary exams, and observation; hypertension: observation; tremor: mat heater, blood transfusion; nausea/vomiting: routine, medication and urinary catheterization; bleeding: routine, medication and bandages; hypoxemia: routine and oxygen therapy; hypothermia: routine, mat heater, and medication. Pain, nausea/vomiting, agitation and bleeding showed a statistically significant relationship with the PARR nurse.

  8. First installation of a dual-room IVR-CT system in the emergency room.

    Science.gov (United States)

    Wada, Daiki; Nakamori, Yasushi; Kanayama, Shuji; Maruyama, Shuhei; Kawada, Masahiro; Iwamura, Hiromu; Hayakawa, Koichi; Saito, Fukuki; Kuwagata, Yasuyuki

    2018-03-05

    Computed tomography (CT) embedded in the emergency room has gained importance in the early diagnostic phase of trauma care. In 2011, we implemented a new trauma workflow concept with a sliding CT scanner system with interventional radiology features (IVR-CT) that allows CT examination and emergency therapeutic intervention without relocating the patient, which we call the Hybrid emergency room (Hybrid ER). In the Hybrid ER, all life-saving procedures, CT examination, damage control surgery, and transcatheter arterial embolisation can be performed on the same table. Although the trauma workflow realized in the Hybrid ER may improve mortality in severe trauma, the Hybrid ER can potentially affect the efficacy of other in/outpatient diagnostic workflow because one room is occupied by one severely injured patient undergoing both emergency trauma care and CT scanning for long periods. In July 2017, we implemented a new trauma workflow concept with a dual-room sliding CT scanner system with interventional radiology features (dual-room IVR-CT) to increase patient throughput. When we perform emergency surgery or interventional radiology for a severely injured or ill patient in the Hybrid ER, the sliding CT scanner moves to the adjacent CT suite, and we can perform CT scanning of another in/outpatient. We believe that dual-room IVR-CT can contribute to the improvement of both the survival of severely injured or ill patients and patient throughput.

  9. Control console of the gamma calibration room

    International Nuclear Information System (INIS)

    Vilchis P, A.E.; Romero G, M.

    1999-01-01

    The Nuclear Centre of Mexico has a Ionizing Radiation Metrology Center (CMRI). This is in charge of the calibration in Mexico and Latin America of equipment dedicated to radiation measurement as industrial, medical as other fields. The importance to ensure that the equipment stay justly calibrated, it is imposed the necessity of automating the different rooms which the CMRI has. in this case it will be exposed the Calibration room for gamma radiation type. The operation of this application was carried out with the LabVIEW development platform and also in C language. The hardware associated is: personal computer with two cards using the 8255 device, 16 channels with optical isolation to manage input/output TTL type, 16 channels with optical isolation to management of charges to 127 V a.c., and 2 channels for 90V d.c. motors. (Author)

  10. Light and Mediaprojections in Patient Rooms

    DEFF Research Database (Denmark)

    Bonde, Esben Oxholm Skjødt; Nielsen, Stine Maria Louring; Hansen, Ellen Kathrine

    2018-01-01

    the specific needs of the patients and thereby provide higher patient satisfaction. Hereto, the main findings suggest that the control of the lighting needs to be less complicated, the different lighting settings needs to be better tailored to the actual needs, noise from the projector and light coming from......New media and lighting technology and new ways to connect and control it has potentials to improve the environment in hospitals with the goal of increasing patient satisfaction. How should such system be designed to do so and how can it be tested? In this paper it is investigated how a specific...... case, an interactive lighting and media system installed in a patient room, can be improved to support a greater experience of patient satisfaction. Through questionnaires given to 14 mothers who have just given birth and their husbands staying in an interactive patient room, the experience of staying...

  11. Local public document room directory. Revision 7

    International Nuclear Information System (INIS)

    1998-04-01

    This directory (NUREG/BR-0088, Revision 7) lists local public document rooms (LPDRs) for commercial nuclear power plants with operating or possession-only licenses or under construction, plus the LPDRs for potential high-level radioactive waste repository sites, gaseous diffusion plants, certain fuel cycle facilities, certain low-level waste disposal facilities, and any temporary LPDRs established for the duration of licensing proceedings. In some instances, the LPDR libraries maintain document collections for more than one licensed facility. The library staff members listed are the persons most familiar with the LPDR collections. Reference librarians in the NRC Headquarters Public Document Room (PDR) are also available to assist the public in locating NRC documents

  12. The role of the control room operator

    International Nuclear Information System (INIS)

    Williams, M.C.

    A control room operator at an Ontario Hydro nuclear power plant operates a reactor-turbine unit according to approved procedures within imposed constraints to meet the objectives of the organization. A number of operating and administrative tasks make up this role. Control room operators spend approximately six percent of their time physically operating equipment exclusive of upset conditions, and another one percent operating in upset conditions. Testing occupies five percent of an operator's time. Operators must be trained to recognize the entire spectrum of inputs available to them and use them all effectively. Any change in system or unit state is always made according to an approved procedure. Extensive training is required; operators must be taught and pracised in what to do, and must know the reasons behind their actions. They are expected to memorize emergency procedures, to know when to consult operating procedures, and to have sufficient understanding and practice to perform these procedures reliably

  13. Room-temperature ductile inorganic semiconductor

    Science.gov (United States)

    Shi, Xun; Chen, Hongyi; Hao, Feng; Liu, Ruiheng; Wang, Tuo; Qiu, Pengfei; Burkhardt, Ulrich; Grin, Yuri; Chen, Lidong

    2018-05-01

    Ductility is common in metals and metal-based alloys, but is rarely observed in inorganic semiconductors and ceramic insulators. In particular, room-temperature ductile inorganic semiconductors were not known until now. Here, we report an inorganic α-Ag2S semiconductor that exhibits extraordinary metal-like ductility with high plastic deformation strains at room temperature. Analysis of the chemical bonding reveals systems of planes with relatively weak atomic interactions in the crystal structure. In combination with irregularly distributed silver-silver and sulfur-silver bonds due to the silver diffusion, they suppress the cleavage of the material, and thus result in unprecedented ductility. This work opens up the possibility of searching for ductile inorganic semiconductors/ceramics for flexible electronic devices.

  14. Room source management decontamination in Uruguay

    International Nuclear Information System (INIS)

    Blanco, D.; Montanez, Osvaldo

    1998-01-01

    A surface,work materials and tools contamination it produced for Ra-226 sources management in des use in Uruguayan radioactive waste and sources management and storage room specifically in the Uruguay Republic University in Nuclear Search Center. A surface contamination direct was performed measurement with Eberline alpha particles Contamat FHT 111M with 42 496/30 sounder. It found greater and least contamination grade in all cement floor as well as in tables where was managed with Ra-226 sources. A value measured surface contamination can see in the Room scheme with more 200 Bq/cm in extension small places. A segregation between work materials and tools considerate d free contamination was realized. The contaminated objects was separated for a future treatment. A proceeding followed in the decontamination was inhale, abrasion,sweep essays in different representative zones, obtain decontamination factors and residual activity

  15. Natural radioactivity inside rooms - a health hazard

    International Nuclear Information System (INIS)

    Reiter, R.

    1984-01-01

    In continuation of an article published in the previous issue, results of radon measurements in closed rooms are presented as well as some daily curves of radon concentrations. Radium concentrations were measured in the most relevant building materials. The findings are discussed under the aspect of radiation exposure. The results of studies on health, genetic effects and mortality rates of exposed families are presented along with a short bibliography. (MG) [de

  16. Final disposal room structural response calculations

    International Nuclear Information System (INIS)

    Stone, C.M.

    1997-08-01

    Finite element calculations have been performed to determine the structural response of waste-filled disposal rooms at the WIPP for a period of 10,000 years after emplacement of the waste. The calculations were performed to generate the porosity surface data for the final set of compliance calculations. The most recent reference data for the stratigraphy, waste characterization, gas generation potential, and nonlinear material response have been brought together for this final set of calculations

  17. Improving the Engine room of a Yacht

    OpenAIRE

    Castells, Josep

    2016-01-01

    The aim of this project is to improve the energy efficiency of a sailing yacht engine room by reducing the inputs and maximizing the outputs and simultaneously striving to reduce the weight. The document is structured in three sections; an introduction about the important concepts and the case, a theoretical part with the technologies that are applicable in the project and that could improve it and finally, an analysis and suggested improvements of the system. This project strives to exp...

  18. Palo Verde receives new control room simulator

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    A new control room simulator was delivered to Arizona Public Service Company's Palo Verde nuclear generating station in late August. The system, the second simulator on site, will be used for training beginning in January 1994, said David C. Brown, manager of the simulator upgrade project. Having two simulators will ease the current tight training schedule, and allow expansion of instruction to personnel other than licensed operators

  19. Augmented Reality Platforms for Virtual Fitting Rooms

    OpenAIRE

    Ioannis Pachoulakis; Kostas Kapetanakis

    2012-01-01

    Multi-sensor body scanners combined with new algorithms and social media technologies have started a revolutionary shift away from the classic desktop paradigm and into the direction of intuitive, “natural interaction” where people interface with the technological world through hand gestures, speech and body language. This article reviews recent examples of Virtual Fitting Rooms (VFRs) and supporting technologies which facilitate the shopping experience by letting customers to try...

  20. White Paper for Virtual Control Room

    Science.gov (United States)

    Little, William; Tully-Hanson, Benjamin

    2015-01-01

    The Virtual Control Room (VCR) Proof of Concept (PoC) project is the result of an award given by the Fourth Annual NASA T&I Labs Challenge Project Call. This paper will outline the work done over the award period to build and enhance the capabilities of the Augmented/Virtual Reality (AVR) Lab at NASA's Kennedy Space Center (KSC) to create the VCR.

  1. Method for control-room display design

    International Nuclear Information System (INIS)

    Montmayeul, R.

    1988-01-01

    This document describes a method for control-room displays design. It can be used either for isolated display to add to an existing system either for the design of a full system of operator aids. The method is a top-down design with steps of possible iteration. The emphasis is put on display design rather than on system design; system aspects are just mentioned. Advantages of using a method are described [fr

  2. Radiation Protection Elephants in the Room

    International Nuclear Information System (INIS)

    Vetter, R. J.

    2004-01-01

    As our system of radiological protection evolves, several significant issues loom within radiation protection discussions and publications. These issues influence the nature of epidemiological and radiobiological research and the establishment of radiation protection recommendations, standards, and regulations. These issues are like the proverbial e lephants in the room . They are large, and it is unwise to ignore them. This paper discusses the impact of three young elephants as they make their presence increasingly obvious: increased cancer susceptibility from early-life exposure to radiation, terrorism and fear of radiation, and patient safety. Increased cancer susceptibility from early-life exposure to radiation is emerging as a discussion topic related to the safety of computed tomography (CT) and other medical modalities. Shortly after publication of CT dose data, manufacturers were helping to reduce doses to children by increasing flexibility for adjustment of technique factors. Also, radiation epidemiological data are being used in the development of guidance on exposure to chemical carcinogens during early life. Re-emergence of public fear of radiation has been fueled by threats of radiological dispersion devises and confusing messages about personal decontamination, emergency room acceptance or rejection of contaminated victims, and environmental clean-up. Finally, several professional publications have characterized risk of medical radiation exposure in terms of patient deaths even though epidemiological data do not support such conclusions. All three of these elephants require excellent science and sophisticated data analysis to coax them from the room. Anecdotal communications that confuse the public should be avoided. These are not the only elephants in the room, but these three are making their presence increasingly obvious. This paper discusses the need for radiation protection professionals to rely on good science in the evolution of the system of

  3. Visuaalisen identiteetin luominen Room Concept-kalustemerkille

    OpenAIRE

    Saarikko, Sofia

    2010-01-01

    Tutkin opinnäytetyönäni visuaalisen identiteetin luomisprosessia tuotemerkille, jolla ei ole aiempaa ilmettä. Selvitän miten yrityksen identiteetti rakentuu ja vahvistuu visuaalisuuden kautta. Työni projektiosuus koostuu visuaalisen identiteetin toteutuksesta Room Concept-huonekalumerkille, Albarossa Oy:n toimeksiantona. Projektiosuuteen liittyy visuaalisen identiteetin mukaiset materiaalit ja graafinen ohjeisto. Graafinen ohjeisto on tarkoitettu takaamaan ilmeen globaali yhtenäisyys, si...

  4. Clinical leadership: the elephant in the room.

    Science.gov (United States)

    Edmonstone, John

    2009-01-01

    The article explores the concept of clinical leadership in the National Health Service in the UK by seeking to establish a workable definition and by contrasting it with managerial leadership, focussing on the 'disconnected hierarchy' in professional organizations. It proposes that the problems faced by clinical leadership relate to the current nature of general management in the NHS and concludes by suggesting that clinical leadership is the 'elephant in the room'-often ignored or unaddressed.

  5. Engineering Process Monitoring for Control Room Operation

    OpenAIRE

    Bätz, M

    2001-01-01

    A major challenge in process operation is to reduce costs and increase system efficiency whereas the complexity of automated process engineering, control and monitoring systems increases continuously. To cope with this challenge the design, implementation and operation of process monitoring systems for control room operation have to be treated as an ensemble. This is only possible if the engineering of the monitoring information is focused on the production objective and is lead in close coll...

  6. Qualities of Inpatient Hospital Rooms: Patients' Perspectives.

    Science.gov (United States)

    Devlin, Ann Sloan; Andrade, Cláudia Campos; Carvalho, Diana

    2016-04-01

    The aim of this qualitative study was to investigate what design features of hospital rooms are valued by inpatients. Little research has explored how patients evaluate the physical environment of their hospital rooms. Most responses are captured by the Hospital Consumer Assessment of Healthcare Providers and Systems survey, which includes only two questions about the physical environment. Two hundred thirty-six orthopedic patients (78 in the United States and 158 in Portugal) listed three features of their hospital room that influenced their level of satisfaction with their hospital stay, indicating whether the feature was positive or negative. The comments were more positive (71.4%) than negative (28.6%). Using the framework of supportive design from Ulrich, over half the comments (64.31%) could be categorized in one of the three dimensions: 33.2% (positive distraction), 22.4% (perceived control), and 6.0% (social support). This total includes Internet (2.7%), which could be categorized as either social support or positive distraction. Comments called "other aspects" focused on overall environmental appraisals, cleanliness, and functionality and maintenance. The majority of comments could be accommodated by Ulrich's theory, but it is noteworthy that other aspects emerge from patients' comments and affect their experience. Cross-cultural differences pointed to the greater role of light and sun for Portuguese patients and health status whiteboard for U.S. Qualitative research can add significantly to our understanding of the healthcare experience and may inform design decisions. © The Author(s) 2015.

  7. NRC study of control room habitability

    International Nuclear Information System (INIS)

    Hayes, J.J. Jr.; Muller, D.R.; Gammill, W.P.

    1985-01-01

    Since 1980, the Advisory Committee on Reactor Safeguards (ACRS) has held several meetings with the NRC staff to discuss the subject of control room habitability. Several meetings between the ACRS and the staff have resulted in ACRS letters that express specific concerns, and the staff has provided responses in reports and meetings. In June of 1983, the NRC Executive Director for Operations directed the Offices of Nuclear Reactor Regulation and Inspection and Enforcement to develop a plan to handle the issues raised by the ACRS and to report to him specific proposed courses of action to respond to the ACRS's concerns. The NRC control room habitability working group has reviewed the subject in such areas as NRR review process, transformation of control room habitability designs to as-built systems, and determination of testing protocol. The group has determined that many of the ACRS concerns and recommendations are well founded, and has recommended actions to be taken to address these as well as other concerns which were raised independent of the ACRS. The review has revealed significant areas where the approach presently utilized in reviews should be altered

  8. A Designed Room Temperature Multilayered Magnetic Semiconductor

    Science.gov (United States)

    Bouma, Dinah Simone; Charilaou, Michalis; Bordel, Catherine; Duchin, Ryan; Barriga, Alexander; Farmer, Adam; Hellman, Frances; Materials Science Division, Lawrence Berkeley National Lab Team

    2015-03-01

    A room temperature magnetic semiconductor has been designed and fabricated by using an epitaxial antiferromagnet (NiO) grown in the (111) orientation, which gives surface uncompensated magnetism for an odd number of planes, layered with the lightly doped semiconductor Al-doped ZnO (AZO). Magnetization and Hall effect measurements of multilayers of NiO and AZO are presented for varying thickness of each. The magnetic properties vary as a function of the number of Ni planes in each NiO layer; an odd number of Ni planes yields on each NiO layer an uncompensated moment which is RKKY-coupled to the moments on adjacent NiO layers via the carriers in the AZO. This RKKY coupling oscillates with the AZO layer thickness, and it disappears entirely in samples where the AZO is replaced with undoped ZnO. The anomalous Hall effect data indicate that the carriers in the AZO are spin-polarized according to the direction of the applied field at both low temperature and room temperature. NiO/AZO multilayers are therefore a promising candidate for spintronic applications demanding a room-temperature semiconductor.

  9. Recent Development in the ATLAS Control Room

    CERN Document Server

    Armen Vartapetian

    Only recently the name ATLAS Control Room (ACR) was more associated with the building at Point 1 (SCX1) than with the real thing. But just within the last several months, with the installation of the ACR hardware, that perception has changed significantly. The recently furnished ATLAS control room. But first of all, if you are not familiar with the ATLAS experimental site and are interested in visiting the ATLAS control room to see the place that in the near future will become the brain of the detector operations, it is quite easy to do so. You don't even need safety helmet or shoes! The ACR is located on the ground floor of a not so typical, glass-covered building in Point 1. The building number on the CERN map is 3162, or SCX1 as we call it. It is also easy to recognize that building by its shiny appearance within the cluster of Point 1 buildings if you are driving from Geneva. Final design and prototyping of the ACR hardware started at the beginning of 2006. Evaluation of the chosen hardware confi...

  10. Advanced tools for enhancing control room collaborations

    International Nuclear Information System (INIS)

    Abla, G.; Flanagan, S.M.; Peng, Q.; Burruss, J.R.; Schissel, D.P.

    2006-01-01

    The US National Fusion Collaboratory (NFC) project has been exploring a variety of computer and network technologies to develop a persistent, efficient, reliable and convenient collaborative environment for magnetic fusion research. One goal is to enhance remote and collocated team collaboration by integrating collaboration software tools into control room operations as well as with data analysis tools. To achieve this goal, the NFC recently introduced two new collaboration technologies into the DIII-D tokamak control room. The first technology is a high-resolution, large format Shared Display Wall (SDW). By creating a shared public display space and providing real time visual information about the multiple aspects of complex experiment activity, the large SDW plays an important role in increasing the rate of information dissemination and promoting interaction among team members. The second technology being implemented is the 'tokamak control room aware' Instant Messaging (IM) service. In addition to providing text-chat capabilities for research scientists, it enables them to automatically receive information about experiment operations and data analysis processes to remotely monitor the status of ongoing tokamak experiment. As a result, the IM service has become a unified portal interface for team collaboration and remote participation

  11. Advanced tools for enhancing control room collaborations

    Energy Technology Data Exchange (ETDEWEB)

    Abla, G. [General Atomics, P.O. Box 85608, San Diego, CA 92186 5608 (United States)]. E-mail: abla@fusion.gat.com; Flanagan, S.M. [General Atomics, P.O. Box 85608, San Diego, CA 92186 5608 (United States); Peng, Q. [General Atomics, P.O. Box 85608, San Diego, CA 92186 5608 (United States); Burruss, J.R. [General Atomics, P.O. Box 85608, San Diego, CA 92186 5608 (United States); Schissel, D.P. [General Atomics, P.O. Box 85608, San Diego, CA 92186 5608 (United States)

    2006-07-15

    The US National Fusion Collaboratory (NFC) project has been exploring a variety of computer and network technologies to develop a persistent, efficient, reliable and convenient collaborative environment for magnetic fusion research. One goal is to enhance remote and collocated team collaboration by integrating collaboration software tools into control room operations as well as with data analysis tools. To achieve this goal, the NFC recently introduced two new collaboration technologies into the DIII-D tokamak control room. The first technology is a high-resolution, large format Shared Display Wall (SDW). By creating a shared public display space and providing real time visual information about the multiple aspects of complex experiment activity, the large SDW plays an important role in increasing the rate of information dissemination and promoting interaction among team members. The second technology being implemented is the 'tokamak control room aware' Instant Messaging (IM) service. In addition to providing text-chat capabilities for research scientists, it enables them to automatically receive information about experiment operations and data analysis processes to remotely monitor the status of ongoing tokamak experiment. As a result, the IM service has become a unified portal interface for team collaboration and remote participation.

  12. Prepare to protect: Operating and maintaining a tornado safe room.

    Science.gov (United States)

    Herseth, Andrew; Goldsmith-Grinspoon, Jennifer; Scott, Pataya

    2017-06-01

    Operating and maintaining a tornado safe room can be critical to the effective continuity of business operations because a firm's most valuable asset is its people. This paper describes aspects of operations and maintenance (O&M) for existing tornado safe rooms as well as a few planning and design aspects that affect the ultimate operation of a safe room for situations where a safe room is planned, but not yet constructed. The information is based on several Federal Emergency Management Agency safe room publications that provide guidance on emergency management and operations, as well as the design and construction of tornado safe rooms.

  13. Investigations on the nature and physical concentration of Spanish uraniferous quartzites; Estudios de caracterizacion y concentracion fisica de cuarcitas uraniferas espanolas

    Energy Technology Data Exchange (ETDEWEB)

    Lora, F de [Direccion de Plantas Piloto e Industriales, Junta de Energia Nuclear, Madrid (Spain)

    1967-06-15

    A study was made of a sample of radioactive material from Santa Elena (Jaen) containing 130 ppm U{sub 3}O{sub 8}, 300 ppm ThO{sub 2}, 4.96% ZrO{sub 2} and 14.29% TiO{sub 2}. Over 150 million tons of material were examined. In the light of the studies carried out the material can be defined as a rutilo-zirconiferous quartzite with a double radioactivity source due to the uranium enclosed in the zircon lattice structure and to the presence of monazite. The possibility of brannerite or davidite being present can be discarded. There is likewise no conclusive evidence of the presence of sphene, rutile being the most abundant titanium mineral. The author determined the features of the ore with a view to its physical concentration and applied magnetic and gravimetric separation and the flotation process. The use of oleic acid as collector has permitted good zircon recovery. (author) [Spanish] Se ha estudiado una muestra de material radiactivo procedente de Santa Elena (Jaen) con 130 ppm de U{sub 3}O{sub 8}, 600 ppm de ThO{sub 2}, 4,96% de ZrO{sub 2} y 14,29% de TiO{sub 2}. El material examinado es considerable: mas de 150 millones de toneladas. De acuerdo con los estudios realizados se puede definir como una cuarcita rutilo-circonifera con dos fuentes de radiactividad debidas al uranio englobado en la red del circon y a la presencia de monacita. Se descarta la posibilidad de existencia de brannerita o davidita. Tampoco existen pruebas concluyentes de que contenga esfena, siendo el ratilo el mineral de titanio mas abundante. Se han determinado las caracteristicas de la mena con vistas a su concentracion fisica. Se ha ensayado la separacion magnetica, gravimetrica y flotacion. El empleo de acido oleico, como colector, ha dado buenas recuperaciones de circon. (author)

  14. Algunas aclaraciones acerca del conocimiento del singular.

    Directory of Open Access Journals (Sweden)

    Carlos Llano Cifuentes

    2013-11-01

    Full Text Available Llano tries to explain the main purpose of El Conocimiento del Singular, showing how the individuals about which the book is concerned are basically human individuals: people as decision makers.

  15. Experimental and numerical comparison of absorption optimization in small rooms

    DEFF Research Database (Denmark)

    Wincentz, Jakob Nygård; Garcia, Julian Martinez-Villalba; Jeong, Cheol-Ho

    2016-01-01

    the Schroeder frequency. This project investigates experimentally changes in the room acoustic parameters by altering the positioning and orientation of porous materials in a small room, which are compared with finite element method (FEM) simulations. FEM is able to take into account the exact room geometry......, boundary conditions, and phase information providing accuracy at low frequencies. Good agreements are found between measurements and simulations, confirming that FEM can be used as a design tool for optimizing absorption and acoustic parameters in small rooms...

  16. 7 CFR 58.212 - Hopper or dump room.

    Science.gov (United States)

    2010-01-01

    ....212 Hopper or dump room. A separate room shall be provided for the transfer of bulk dry dairy products to the hoppers and conveyors which lead to the fillers. This room shall meet the same requirements... transfer of dry dairy products from portable bulk bins will be accepted if gasketed surfaces or direct...

  17. 7 CFR 58.313 - Print and bulk packaging rooms.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Print and bulk packaging rooms. 58.313 Section 58.313 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....313 Print and bulk packaging rooms. Rooms used for packaging print or bulk butter and related products...

  18. 7 CFR 58.620 - Freezing and packaging rooms.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Freezing and packaging rooms. 58.620 Section 58.620 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....620 Freezing and packaging rooms. The rooms used for freezing and packaging frozen desserts shall be...

  19. 27 CFR 24.166 - Buildings or rooms.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Buildings or rooms. 24.166... OF THE TREASURY LIQUORS WINE Construction and Equipment § 24.166 Buildings or rooms. All buildings or... afford adequate protection to the revenue. Each building or room will be constructed of substantial...

  20. 46 CFR 111.105-41 - Battery rooms.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Battery rooms. 111.105-41 Section 111.105-41 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Hazardous Locations § 111.105-41 Battery rooms. Each electrical installation in a battery room...

  1. The Clock Is Ticking: Library Orientation as Puzzle Room

    Science.gov (United States)

    Reade, Tripp

    2017-01-01

    Tripp Reade is the school librarian at Cardinal Gibbons High School in Raleigh, North Carolina. This article describes how he redesigned his school's library orientation program after learning about escape rooms and a variant known as puzzle rooms. Puzzle rooms present players with a set of challenges to solve; they require "teamwork,…

  2. 7 CFR 58.413 - Cutting and packaging rooms.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Cutting and packaging rooms. 58.413 Section 58.413....413 Cutting and packaging rooms. When small packages of cheese are cut and wrapped, separate rooms shall be provided for the cleaning and preparation of the bulk cheese and for the cutting and wrapping...

  3. Room airflow studies using sonic anemometry

    International Nuclear Information System (INIS)

    Wasiolek, P.T.; Whicker, J.J.; Gong, H.; Rodgers, J.C.

    1999-01-01

    To ensure prompt response by real-time air monitors to an accidental release of toxic aerosols in a workplace, safety professionals should understand airflow patterns. This understanding can be achieved with validated computational fluid dynamics (CFD) computer simulations, or with experimental techniques, such as measurements with smoke, neutrally buoyant markers, trace gases, or trace aerosol particles. As a supplementary technique to quantify airflows, the use of a state-of-the-art, three-dimensional sonic anemometer was explored. This instrument allows for the precise measurements of the air-velocity vector components in the range of a few centimeters per second, which is common in many indoor work environments. Measurements of air velocities and directions at selected locations were made for the purpose of providing data for characterizing fundamental aspects of indoor air movement in two ventilated rooms and for comparison to CFD model predictions. One room was a mockup of a plutonium workroom, and the other was an actual functioning plutonium workroom. In the mockup room, air-velocity vector components were measured at 19 locations at three heights (60, 120 and 180 cm) with average velocities varying from 1.4 cm s -1 to 9.7 cm s -1 . There were complex flow patterns observed with turbulence intensities from 39% up to 108%. In the plutonium workroom, measurements were made at the breathing-zone height, recording average velocities ranging from 9.9 cm s -1 to 35.5 cm s -1 with turbulence intensities from 33% to 108%. (au)

  4. Room Temperature Ferromagnetic Mn:Ge(001

    Directory of Open Access Journals (Sweden)

    George Adrian Lungu

    2013-12-01

    Full Text Available We report the synthesis of a room temperature ferromagnetic Mn-Ge system obtained by simple deposition of manganese on Ge(001, heated at relatively high temperature (starting with 250 °C. The samples were characterized by low energy electron diffraction (LEED, scanning tunneling microscopy (STM, high resolution transmission electron microscopy (HRTEM, X-ray photoelectron spectroscopy (XPS, superconducting quantum interference device (SQUID, and magneto-optical Kerr effect (MOKE. Samples deposited at relatively elevated temperature (350 °C exhibited the formation of ~5–8 nm diameter Mn5Ge3 and Mn11Ge8 agglomerates by HRTEM, while XPS identified at least two Mn-containing phases: the agglomerates, together with a Ge-rich MnGe~2.5 phase, or manganese diluted into the Ge(001 crystal. LEED revealed the persistence of long range order after a relatively high amount of Mn (100 nm deposited on the single crystal substrate. STM probed the existence of dimer rows on the surface, slightly elongated as compared with Ge–Ge dimers on Ge(001. The films exhibited a clear ferromagnetism at room temperature, opening the possibility of forming a magnetic phase behind a nearly ideally terminated Ge surface, which could find applications in integration of magnetic functionalities on semiconductor bases. SQUID probed the co-existence of a superparamagnetic phase, with one phase which may be attributed to a diluted magnetic semiconductor. The hypothesis that the room temperature ferromagnetic phase might be the one with manganese diluted into the Ge crystal is formulated and discussed.

  5. Room airflow studies using sonic anemometry.

    Science.gov (United States)

    Wasiolek, P T; Whicker, J J; Gong, H; Rodgers, J C

    1999-06-01

    To ensure prompt response by real-time air monitors to an accidental release of toxic aerosols in a workplace, safety professionals should understand airflow patterns. This understanding can be achieved with validated computational fluid dynamics (CFD) computer simulations, or with experimental techniques, such as measurements with smoke, neutrally buoyant markers, trace gases, or trace aerosol particles. As a supplementary technique to quantify airflows, the use of a state-of-the art, three-dimensional sonic anemometer was explored. This instrument allows for the precise measurements of the air-velocity vector components in the range of a few centimeters per second, which is common in many indoor work environments. Measurements of air velocities and directions at selected locations were made for the purpose of providing data for characterizing fundamental aspects of indoor air movement in two ventilated rooms and for comparison to CFD model predictions. One room was a mockup of a plutonium workroom, and the other was an actual functioning plutonium workroom. In the mockup room, air-velocity vector components were measured at 19 locations at three heights (60, 120 and 180 cm) with average velocities varying from 1.4 cm s-1 to 9.7 cm s-1. There were complex flow patterns observed with turbulence intensities from 39% up to 108%. In the plutonium workroom, measurements were made at the breathing-zone height, recording average velocities ranging from 9.9 cm s-1 to 35.5 cm s-1 with turbulence intensities from 33% to 108%.

  6. Room airflow studies using sonic anemometry

    Energy Technology Data Exchange (ETDEWEB)

    Wasiolek, P.T.; Whicker, J.J.; Gong, H.; Rodgers, J.C. [Los Alamos National Lab., Health Physics Measurements Group, Los Alamos, NM (United States)

    1999-10-01

    To ensure prompt response by real-time air monitors to an accidental release of toxic aerosols in a workplace, safety professionals should understand airflow patterns. This understanding can be achieved with validated computational fluid dynamics (CFD) computer simulations, or with experimental techniques, such as measurements with smoke, neutrally buoyant markers, trace gases, or trace aerosol particles. As a supplementary technique to quantify airflows, the use of a state-of-the-art, three-dimensional sonic anemometer was explored. This instrument allows for the precise measurements of the air-velocity vector components in the range of a few centimeters per second, which is common in many indoor work environments. Measurements of air velocities and directions at selected locations were made for the purpose of providing data for characterizing fundamental aspects of indoor air movement in two ventilated rooms and for comparison to CFD model predictions. One room was a mockup of a plutonium workroom, and the other was an actual functioning plutonium workroom. In the mockup room, air-velocity vector components were measured at 19 locations at three heights (60, 120 and 180 cm) with average velocities varying from 1.4 cm s{sup -1} to 9.7 cm s{sup -1}. There were complex flow patterns observed with turbulence intensities from 39% up to 108%. In the plutonium workroom, measurements were made at the breathing-zone height, recording average velocities ranging from 9.9 cm s{sup -1} to 35.5 cm s{sup -1} with turbulence intensities from 33% to 108%. (au) 17 refs.

  7. Subjective task complexity in the control room

    International Nuclear Information System (INIS)

    Braarud, Per Oeivind

    2000-05-01

    Understanding of what makes a control room situation difficult to handle is important when studying operator performance, both with respect to prediction as well as improvement of the human performance. Previous exploratory work on complexity showed a potential for prediction and explanation of operator performance. This report investigates in further detail the theoretical background and the structure of operator rated task complexity. The report complements the previous work on complexity to make a basis for development of operator performance analysis tools. The first part of the report outlines an approach for studying the complexity of the control room crew's work. The approach draws upon man-machine research as well as problem solving research. The approach identifies five complexity-shaping components: 'task work characteristics', 'teamwork characteristics', 'individual skill', 'teamwork skill', and 'interface and support systems'. The crew's work complexity is related to concepts of human performance quality and human error. The second part of the report is a post-hoc exploratory analysis of four empirical HRP studies, where operators' conception of the complexity of control room work is assessed by questionnaires. The analysis deals with the structure of complexity questionnaire ratings, and the relationship between complexity ratings and human performance measures. The main findings from the analysis of structure was the identification of three task work factors which were named Masking, Information load and Temporal demand, and in addition the identification of one interface factor which was named Navigation. Post-hoc analysis suggests that operator's subjective complexity, which was assessed by questionnaires, is related to workload, task and system performance, and operator's self-rated performance. (Author). 28 refs., 47 tabs

  8. Skill retention and control room operator competency

    International Nuclear Information System (INIS)

    Stammers, R.B.

    1981-12-01

    The problem of skill retention in relation to the competency of control room operators is addressed. Although there are a number of related reviews of the literature, this particular topic has not been examined in detail before. The findings of these reviews are summarised and their implications for the area discussed. The limited research on skill retention in connection with process control is also reviewed. Some topics from cognitive and instructional psychology are also raised. In particular overlearning is tackled and the potential value of learning strategies is assessed. In conclusion the important topic of measurement of performance is introduced and a number of potentially valuable training approaches are outlined. (author)

  9. PS Main Control Room (partial view)

    CERN Multimedia

    1974-01-01

    Jean-Pierre Potier (turning buttons) and Bertran Frammery (telephoning) on shift. The 26 GeV Synchrotron and later also its related machines (Linacs 1,2,3; PS-Booster; LEP-Injector Linacs and Electron-Positron Accumulator; Antiproton Accumulator, Antiproton Collector, Low Energy Antiproton Ring and more recently Antiproton Decelerator) were all controlled from the PS control room situated on the Meyrin site. The SPS and LEP were controlled from a separat control centre on the Prevessin site. In 2005 all controls were transferred to the Prevessin centre.

  10. Ventilation of nuclear rooms and operators' protection

    International Nuclear Information System (INIS)

    Vavasseur, C.

    1985-01-01

    Ventilation systems are designed to guarantee air replacement in rooms so as to evacuate gases, odors and aerosols liable to be produced therein. This air is conditioned, filtered, heated, and the relative humidity checked. At the outlet, a filtration system adapted to the type of effluent prevents the external dispersion of toxic substances. Ventilation is defined by the air change time. A comfort rule recommends reducing the velocities reaching the person present in less than 0.2 m/sec. This reduction is achieved by adjusting the natural property of the jets, induction, by means of diffusers placed at the vents

  11. Diffraction and diffusion in room acoustics

    DEFF Research Database (Denmark)

    Rindel, Jens Holger; Rasmussen, Birgit

    1996-01-01

    Diffraction and diffusion are two phenomena that are both related to the wave nature of sound. Diffraction due to the finite size of reflecting surfaces and the design of single reflectors and reflector arrays are discussed. Diffusion is the result of scattering of sound reflected from surfaces...... that are not plane but curved or irregular. The importance of diffusion has been demonstrated in concert halls. Methods for the design of diffusing surfaces and the development of new types of diffusers are reviewed. Finally, the importance of diffraction and diffusion in room acoustic computer models is discussed....

  12. Healthy Buildings and Air Distribution in Rooms

    DEFF Research Database (Denmark)

    Nielsen, Peter V.

    Healthy buildings are to a great extent a question of indoor air quality. The processes involved in air quality can be looked upon as a number of links in a chain. Typical links will be emission from building materials, convection and diffusion in the room, local airflow around a person, personal...... exposure and at last the effect of the air quality on the occupant. The best results will obviously be obtained by using building materials with low emission. However, there will always exist some emission and the ventilation will consequently be an important link....

  13. Firing Room Remote Application Software Development

    Science.gov (United States)

    Liu, Kan

    2015-01-01

    The Engineering and Technology Directorate (NE) at National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC) is designing a new command and control system for the checkout and launch of Space Launch System (SLS) and future rockets. The purposes of the semester long internship as a remote application software developer include the design, development, integration, and verification of the software and hardware in the firing rooms, in particular with the Mobile Launcher (ML) Launch Accessories (LACC) subsystem. In addition, a software test verification procedure document was created to verify and checkout LACC software for Launch Equipment Test Facility (LETF) testing.

  14. Digital image display system for emergency room

    International Nuclear Information System (INIS)

    Murry, R.C.; Lane, T.J.; Miax, L.S.

    1989-01-01

    This paper reports on a digital image display system for the emergency room (ER) in a major trauma hospital. Its objective is to reduce radiographic image delivery time to a busy ER while simultaneously providing a multimodality capability. Image storage, retrieval, and display will also be facilitated with this system. The system's backbone is a token-ring network of RISC and personal computers. The display terminals are higher- function RISC computers with 1,024 2 color or gray-scale monitors. The PCs serve as administrative terminals. Nuclear medicine, CT, MR, and digitized film images are transferred to the image display system

  15. Smart Offices and Intelligent Decision Rooms

    Science.gov (United States)

    Ramos, Carlos; Marreiros, Goreti; Santos, Ricardo; Freitas, Carlos Filipe

    Nowadays computing technology research is focused on the development of Smart Environments. Following that line of thought several Smart Rooms projects were developed and their appliances are very diversified. The appliances include projects in the context of workplace or everyday living, entertainment, play and education. These appliances envisage to acquire and apply knowledge about the environment state in order to reason about it so as to define a desired state for its inhabitants and perform adaptation adaptation to these desires and therefore improving their involvement and satisfaction with that environment.

  16. Future control room design (modernization of control room systems); Zukuenftiges Wartendesign (Modernisierung von Warteneinrichtungen)

    Energy Technology Data Exchange (ETDEWEB)

    Reischl, Ludwig; Freitag, Timo; Dergel, Rene [AREVA NP (Germany). NLLR-G ' ' Reactor I and C' '

    2009-07-01

    In the frame of lifetime extension for nuclear power plants the modernization of the complete safety and operational control technology will be digitalized. It is also recommended to modernize the operator facilities, monitoring systems in the control room, the back-up shut-down center and the local control stations. The authors summarize the reasons for the modernization recommendations and discuss possible solutions for display-oriented control rooms. A concept for control room backfitting includes generic requirements, requirements of the local authorities, ergonomic principles information content and information density, and the design process. The backfitting strategy should include a cooperation with the operational personnel, The quality assurance and training via simulator needs sufficient timing during the implementation of the backfitting.

  17. Evaluating the auralization of a small room in a virtual sound environment using objective room acoustic measures

    DEFF Research Database (Denmark)

    Ahrens, Axel; Marschall, Marton; Dau, Torsten

    2016-01-01

    To study human auditory perception in realistic environments, loudspeaker-based reproduction techniques have recently become state-of-the-art. To evaluate the accuracy of a simulation-based room auralization of a small room, objective measures, such as early-decay-time (EDT), reverberation time...... of the room. The auralizations were generated using the loudspeaker-based room auralization toolbox (LoRA; Favrot and Buchholz, 2010) and reproduced in a 64-channel loudspeaker array, set up in an anechoic chamber. Differences between the objective measures evaluated in the real and the virtual room were......, clarity, interaural cross-correlation (IACC), and the speech transmission index were measured in an IEC listening room for 28 source-receiver combinations. The room was then modeled in the room acoustics software ODEON, and the same objective measures were also evaluated for the auralized version...

  18. Single room control for user-optimised room air conditions; Einzelraumregelung fuer nutzungsoptimiertes Raumklima

    Energy Technology Data Exchange (ETDEWEB)

    Lezius, A. [Staefa Control System GmbH, Leinfelden-Echterdingen (Germany)

    1995-12-31

    In chapter 14 of the anthology about building control the single room control for achieving user-optimised room air conditions is described. The following aspects are discussed: What is comfort? What is economic efficiency? Systems for secondary air treatment, adapted functions of the measurement and control technique, management functions, orientation of the demand at the use, investment and amortisation. (BWI) [Deutsch] Kapitel 14 des Sammelbandes ueber Building control ist dem Thema der Einzelraumregelung zur Erzielung eines nutzungsoptimierten Raumklimas gewidmet. In diesem Zusammenhang werden folgende Themenbereiche angesprochen: Was ist Komfort? Was ist Wirtschaftlichkeit? Systeme fuer sekundaere Luftbehandlung; Angepasste Funktionen der MSR-Technik; Managementfunktionen; Bedarfsorientierung an der Nutzung; Investition und Amortisation. (BWI)

  19. Psicodrama del duelo.

    OpenAIRE

    José Antonio Espina Barrio; Marisol Filgueira Bouza

    1997-01-01

    La pérdida de rituales agrava y alarga la reacción del duelo. Se define el Psicodrama Antropológico y su intervención en el proceso del duelo. El Psicodrama Focal del Duelo es una psicoterapia breve centrada en el proceso de Duelo. Se comentan varios casos y resultados. Se concluye con un programa sencillo para el duelo en Atención Primaria.

  20. Game theoretic approaches to operating room management.

    Science.gov (United States)

    Marco, Alan P

    2002-05-01

    All interactions between people can be considered games with rules and outcomes. However, modern business practices demand that the players in the game go beyond traditional game theory and look at new ways to improve the outcome of the game. Choosing the right strategy is important to a player's success. A new business strategy, "co-opetition," can be used to increase the value of the game ("create a bigger pie") through cooperative behavior, whereas competition is used to divided the "pie." By looking at how the players adopt simultaneous roles such as complementor and competitor the stakeholders in the operating room (managers, surgeons, anesthesiologists, and nursing staff) can apply the principles of co-opetition to improve the overall success of their facility. Such stakeholders can utilize knowledge of how populations act in games to enhance cooperative play. Adopting such a perspective may lead to increases in the satisfaction and morale of those involved with the operating rooms. Increased morale should increase productivity and staff retention and reduce recruiting needs.

  1. Data for Room Fire Model Comparisons.

    Science.gov (United States)

    Peacock, Richard D; Davis, Sanford; Babrauskas, Vytenis

    1991-01-01

    With the development of models to predict fire growth and spread in buildings, there has been a concomitant evolution in the measurement and analysis of experimental data in real-scale fires. This report presents the types of analyses that can be used to examine large-scale room fire test data to prepare the data for comparison with zone-based fire models. Five sets of experimental data which can be used to test the limits of a typical two-zone fire model are detailed. A standard set of nomenclature describing the geometry of the building and the quantities measured in each experiment is presented. Availability of ancillary data (such as smaller-scale test results) is included. These descriptions, along with the data (available in computer-readable form) should allow comparisons between the experiment and model predictions. The base of experimental data ranges in complexity from one room tests with individual furniture items to a series of tests conducted in a multiple story hotel equipped with a zoned smoke control system.

  2. Materials for room temperature magnetic refrigeration

    Energy Technology Data Exchange (ETDEWEB)

    Rosendahl Hansen, B.

    2010-07-15

    Magnetic refrigeration is a cooling method, which holds the promise of being cleaner and more efficient than conventional vapor-compression cooling. Much research has been done during the last two decades on various magnetic materials for this purpose and today a number of materials are considered candidates as they fulfill many of the requirements for a magnetic refrigerant. However, no one material stands out and the field is still active with improving the known materials and in the search for a better one. Magnetic cooling is based on the magnetocaloric effect, which causes a magnetic material to change its temperature when a magnetic field is applied or removed. For room temperature cooling, one utilizes that the magnetocaloric effect peaks near magnetic phase transitions and so the materials of interest all have a critical temperature within the range of 250 - 310 K. A magnetic refrigerant should fulfill a number of criteria, among these a large magnetic entropy change, a large adiabatic temperature change, preferably little to no thermal or magnetic hysteresis and the material should have the stability required for long term use. As the temperature range required for room temperature cooling is some 40 - 50 K, the magnetic refrigerant should also be able to cover this temperature span either by exhibiting a very broad peak in magnetocaloric effect or by providing the opportunity for creating a materials series with varying transition temperatures. (Author)

  3. Improving operating room coordination: communication pattern assessment.

    Science.gov (United States)

    Moss, Jacqueline; Xiao, Yan

    2004-02-01

    To capture communication patterns in operating room (OR) management to characterize the information needs of OR coordination. Technological applications can be used to change system processes to improve communication and information access, thereby decreasing errors and adverse events. The successful design of such applications relies on an understanding of communication patterns among healthcare professionals. Charge nurse communication was observed and documented at four OR suites at three tertiary hospitals. The data collection tool allowed rapid coding of communication patterns in terms of duration, mode, target person, and the purpose of each communication episode. Most (69.24%) of the 2074 communication episodes observed occurred face to face. Coordinating equipment was the most frequently occurring purpose of communication (38.7%) in all suites. The frequency of other purposes in decreasing order were coordinating patient preparedness (25.7%), staffing (18.8%), room assignment (10.7%), and scheduling and rescheduling surgery (6.2%). The results of this study suggest that automating aspects of preparing patients for surgery and surgical equipment management has the potential to reduce information exchange, decreasing interruptions to clinicians and diminishing the possibility of adverse events in the clinical setting.

  4. PACS war room for global teleradiology

    Science.gov (United States)

    Chen, Doris T.; Ho, Bruce K. T.; Chao, Woodrew; Taira, Ricky K.; Kangarloo, Hooshang

    1995-05-01

    UCLA is beginning teleradiology projects in Latin America, Asian Pacific, and the U.S. The UCLA teleradiology system communicates with remote imaging centers through a T1 based WAN and satellite technology. A network management center, i.e., PACS war room, with graphical user interface allows the system manager to monitor and control different elements of the system through various levels of abstraction from one location. The network manager software can monitor the activities of both hardware and software devices in the remote imaging centers, LAN and WAN performance, telearchiving and teleaccess pattern. Telearchiving can be monitored by graphically indicating large image movements between jukeboxes and over LAN or WAN. Once the teleradiology system is configured, the image flow pattern in a teleradiology center is predictable. Manual intervention of these teleradiology system functions is easily done through menu control in the war room display. A centralized network management with the global view of a teleradiology system has been developed. It can give commands to the elements of the system to tune the system for efficient utilization of the system resources. These managerial functions scale with the teleradiology system which is expandable to include many more potential remote imaging centers.

  5. Stress, performance, and control room operations

    International Nuclear Information System (INIS)

    Fontaine, C.W.

    1990-01-01

    The notion of control room operator performance being detrimentally affected by stress has long been the focus of considerable conjecture. It is important to gain a better understanding of the validity of this concern for the development of effective severe-accident management approaches. This paper illustrates the undeniable negative impact of stress on a wide variety of tasks. A computer-controlled simulated work environment was designed in which both male and female operators were closely monitored during the course of the study for both stress level (using the excretion of the urine catecholamines epinephrine and norepinephrine as an index) and job performance. The experimental parameters employed by the study when coupled with the subsequent statistical analyses of the results allow one to make some rather striking comments with respect to how a given operator might respond to a situation that he or she perceives to be psychologically stressful (whether the stress be externally or internally generated). The findings of this study clearly indicated that stress does impact operator performance on tasks similar in nature to those conducted by control room operators and hence should be seriously considered in the development of severe-accident management strategies

  6. Tritium Room Air Monitor Operating Experience Review

    Energy Technology Data Exchange (ETDEWEB)

    L. C. Cadwallader; B. J. Denny

    2008-09-01

    Monitoring the breathing air in tritium facility rooms for airborne tritium is a radiological safety requirement and a best practice for personnel safety. Besides audible alarms for room evacuation, these monitors often send signals for process shutdown, ventilation isolation, and cleanup system actuation to mitigate releases and prevent tritium spread to the environment. Therefore, these monitors are important not only to personnel safety but also to public safety and environmental protection. This paper presents an operating experience review of tritium monitor performance on demand during small (1 mCi to 1 Ci) operational releases, and intentional airborne inroom tritium release tests. The tritium tests provide monitor operation data to allow calculation of a statistical estimate for the reliability of monitors annunciating in actual tritium gas airborne release situations. The data show a failure to operate rate of 3.5E-06/monitor-hr with an upper bound of 4.7E-06, a failure to alarm on demand rate of 1.4E-02/demand with an upper bound of 4.4E-02, and a spurious alarm rate of 0.1 to 0.2/monitor-yr.

  7. Data for Room Fire Model Comparisons

    Science.gov (United States)

    Peacock, Richard D.; Davis, Sanford; Babrauskas, Vytenis

    1991-01-01

    With the development of models to predict fire growth and spread in buildings, there has been a concomitant evolution in the measurement and analysis of experimental data in real-scale fires. This report presents the types of analyses that can be used to examine large-scale room fire test data to prepare the data for comparison with zone-based fire models. Five sets of experimental data which can be used to test the limits of a typical two-zone fire model are detailed. A standard set of nomenclature describing the geometry of the building and the quantities measured in each experiment is presented. Availability of ancillary data (such as smaller-scale test results) is included. These descriptions, along with the data (available in computer-readable form) should allow comparisons between the experiment and model predictions. The base of experimental data ranges in complexity from one room tests with individual furniture items to a series of tests conducted in a multiple story hotel equipped with a zoned smoke control system. PMID:28184121

  8. Speaker comfort and increase of voice level in lecture rooms

    DEFF Research Database (Denmark)

    Brunskog, Jonas; Gade, Anders Christian; Bellester, G P

    2008-01-01

    Teachers often suffer health problems or tension related to their voice. These problems may be related to there working environment, including room acoustics of the lecture rooms which forces them to stress their voices. The present paper describes a first effort in finding relationships between...... were also measured in the rooms and subjective impressions from about 20 persons who had experience talking in these rooms were collected as well. Analysis of the data revealed significant differences in the sound power produced by the speaker in the different rooms. It was also found...

  9. Guidelines for control room systems design. Working material. Report

    International Nuclear Information System (INIS)

    1993-01-01

    This report contains comprehensive technical and methodological information and recommendations for the benefit of Member States for advice and assistance in ''NPP control room systems'' design backfitting existing nuclear power plants and design for future stations. The term ''Control Room Systems'' refers to the entire human/machine interface for the nuclear stations - including the main control room, back-ups control room and the emergency control rooms, local panels, technical support centres, operating staff, operating procedures, operating training programs, communications, etc. Refs, figs and tabs

  10. Fractura triple del complejo suspensorio del hombro

    Directory of Open Access Journals (Sweden)

    Eraclio Delgado Rifá

    2015-06-01

    Full Text Available El complejo suspensorio del hombro es una estructura sumamente importante, compuesta por un anillo de huesos y tejidos blandos. Las lesiones aisladas de este complejo anatómico son frecuentes y no afectan su estabilidad. La interrupción doble conduce a la inestabilidad de esta estructura y usualmente requiere tratamiento quirúrgico. La triple interrupción, por su parte, es sumamente rara y es encontrada en casos de trauma de alta energía a menudo en asociación con otras lesiones. Se presenta una triple lesión del complejo suspensorio del hombro en un paciente de 46 años de edad, con una fractura de la glenoides, del acromion tipo III de Kuhn y de la coracoides tipo II de Ogawa. En este caso, la fractura del acromion fue tratada con fijación percutánea con alambres de Kirschner, por tener asociado lesiones de partes blandas que contraindicaron la reducción abierta. La fractura de la glenoides y de la apófisis coracoides fueron tratadas conservadoramente. Después de 6 meses de evolución, el paciente tuvo un resultado funcional aceptable, con una abducción de 90 grados, los 30 grados de rotación externa y 70 de rotación interna, además asintomático y consolidación de todas las fracturas. A pesar de ser catalogada de una lesión grave del cinturón escapular y estar asociada a otras lesiones se obtuvo un resultado satisfactorio al final del tratamiento.

  11. Characterization of agua de Ramon marbles, Cordoba Province, Argentina; Caracterizacion de los marmoles de agua de Ramon Provincia de Cordoba, Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Tourn, S; Castro, L. [Departamento de Ciencias Geologicas, Facultad de Ciencias Exactas y Naturales, Universidad de buenos Aires, (Argentina)]. E mail: selvia@fcen.uba.ar, lilianacastro@fibertel.com.ar

    2004-09-01

    Agua de Ramon district is located in the NW of Cordoba, Argentina, between 3 49' and 30{sup 0}52' S and 65{sup 0}21' and 65{sup 0}24' W, in the Eastern Pampean Range setting. It was a very important tungsten district until the end of 1950'decade when tungsten mining became of no economic interest. The objective is to report for the first time the petrological, mineralogical and geochemical characteristics of several marble lenses located in the sourthern of the area. Marble outcrops are lenticular ranging from 1 m to 80 m in length and 0.50 m to 20 m width. They appear massive, fine-grained and in light colors (white, pale green, very light brown and pale gray). These last varieties show a distinct banded structure due to little differences in color. These marbles are mainly composed of magnesian calcite accompanied by minor amounts of dolomite, forsterite, humite group minerals, tremolite, talc, serpentine and clinochlore, and scheelite, sphene, apatite and opaque minerals like hematite, magnetite, illmenite, pirrothite and pyrite as accessory minerals. Major chemical analyses indicate a relatively high SiO2 and MgO content, and minor CaO, in comparison with marbles of this type. Mineral paragenesis was useful to evaluate metamorphism conditions in this area. [Spanish] El distrito Agua de Ramon se localiza en el departamento de Minas al noroeste de la provincia de Cordoba, Argentina, entre los paralelos 30{sup 0}49' y 30{sup 0}52' de latitud sur y los meridianos 65{sup 0}21' y 65{sup 0}24' de longitud oeste, en el ambito de las Sierras Pampeanas Orientales. En el pasado constituyo un importante distrito de explotacion wolframifera, pero dicha actividad se halla paralizada desde fines de la decada del '50. El objetivo de este trabajo es hacer conocer por primera vez las caracteristicas de los marmoles localizados en el sector sur desde el punto de vista petrografico, mineralogico y geoquimico de manera que permita realizar un analisis petrogenetico. Los cuerpos son

  12. Vigencia del Darwinismo

    OpenAIRE

    Lessa, Enrique P

    2009-01-01

    En este ensayo se presenta una revisión histórica del signifcado y legado del darwinismo, con énfasis en el último siglo. La principal conclusión es que la visión darwiniana de la evolución, con las modifcaciones requeridas para dar cuenta de los grandes desarrollos de la disciplina, se ha impuesto y mantiene vigencia en nuestros días. En particular, el papel del azar, la evolución como proceso de “descendencia con modifcación” a lo largo de diversas ramas del árbol de la vida, el pensamiento...

  13. Calidad de vida y ciudad: análisis del nivel de desarrollo en Bogotá a través del método de necesidades básicas insatisfechas

    Directory of Open Access Journals (Sweden)

    Andrés Torres

    2013-01-01

    Full Text Available Este trabajo evalúa qué variables caracterizan el nivel de desarrollo y calidad de vida de las comunida- des que habitan las localidades de Bogotá. Para lograr este objetivo se recolectó información de 19 de ellas, dentro de las cuales se analizó el indicador compuesto de necesidades básicas insatisfechas (NBI y todos sus indicadores simples. Con la información recolectada se realizaron pruebas de correlación y análisis de componentes principales para evaluar el indicador Condiciones sanitarias deficientes y NBI. Se concluye que para realizar caracterizaciones gruesas en poblaciones como las de Bogotá, el indicador sim- ple Condiciones sanitarias deficientes es suficiente para clasificar la población. Sin embargo, si se quieren realizar caracterizaciones más finas es recomendable obtener también el NBI compuesto.

  14. Seville City Hall Chapter Room ceiling decoration

    Directory of Open Access Journals (Sweden)

    Robador, M. D.

    2010-02-01

    Full Text Available The present article describes a chemical and physical study of the colour, chemical composition and mineral phases of the decorative materials in the Seville City Hall Chapter House ceiling. The findings showed that the inner most layer of material, calcite, was covered with white lead, in turn concealed under a layer of gilded bole. The ceiling underwent re-gilding, also over bole, due in all likelihood to wear on the original gold leaf. In the nineteenth century, the entire ceiling with the exception of the inscriptions was whitewashed with calcite and white lead. Silver was employed on King John I’s sword (coffer 27. Gold leaf was used to adorn the royal attributes: crowns, belts, sceptres, swords and rosary beads. The high reliefs were likewise gilded. The pigments identified on the ceiling adornments included azurite, malachite, vermilion and gas black. A lime and ground dolomite mortar was used throughout.

    El objetivo de este trabajo es el estudio de diferentes aspectos, como el color, la composición química y las fases mineralógicas presentes en los diferentes materiales que forman la ornamentación del techo de la Sala Capitular del Ayuntamiento de Sevilla, mediante métodos físicos y químicos. Nuestros resultados muestran que el dorado fue realizado sobre una capa de bol previamente depositada sobre una lámina de blanco de plomo que cubría un estrato de calcita. Posteriormente, y probablemente debido a alteraciones en el dorado original, el techo fue de nuevo dorado usando una técnica similar. En el siglo XIX, casi todo el techo, excepto las zonas con inscripciones, fue blanqueado usando una mezcla de calcita y blanco de plomo. Se empleó plata para cubrir la espada del rey Juan I (casetón 27. Finísimas láminas de oro se usaron para decorar los atributos reales: coronas, cinturones, cetros, espadas y rosarios. En diferentes partes de la decoración fueron detectados pigmentos como azurita, malaquita, bermellón y

  15. Improved low frequency room responses by considering finiteness of room boundary surfaces

    DEFF Research Database (Denmark)

    Jeong, Cheol-Ho

    2013-01-01

    surface impedance values that are assigned to all the boundary surfaces, the suggested reflection coefficient is found to improve low frequency responses compared to the infinite panel theory; larger improvements are found for a more disproportionate room, more absorptive surfaces, and surfaces having...

  16. Hybrid control rooms: the effects of introducing new technology into existing control rooms

    International Nuclear Information System (INIS)

    Morisseau, Dolores S.

    2001-02-01

    The goal of this part of the Hybrid Control Room Project is to gain a perspective on the issues and problems that are an integral part of introducing new technology, automated systems, or support systems into nuclear power plant (NPP) control rooms, particularly when they are introduced on a system-by-system basis. For purposes of this project, hybrid control rooms are defined as those into which new technology, such as digital and computer-based controls are gradually incorporated as opposed to those that are completely, or nearly completely, refitted with new technology. Although the focus of this project is the introduction of computer based, digital systems into NPP control rooms, it is not possible to exclude the effects throughout the process that are inevitable when new technology is introduced anywhere in complex process control systems. Thus, this document examines the effects of such changes within the context of the organisation in which they occur, including the management of change, work procedures and work methods, communications and crew interaction, training, and the interdependent functions in the operational context. (Author)

  17. Requirements for Control Room Computer-Based Procedures for use in Hybrid Control Rooms

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Oxstrand, Johanna Helene [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey Clark [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    Many plants in the U.S. are currently undergoing control room modernization. The main drivers for modernization are the aging and obsolescence of existing equipment, which typically results in a like-for-like replacement of analogue equipment with digital systems. However, the modernization efforts present an opportunity to employ advanced technology that would not only extend the life, but enhance the efficiency and cost competitiveness of nuclear power. Computer-based procedures (CBPs) are one example of near-term advanced technology that may provide enhanced efficiencies above and beyond like for like replacements of analog systems. Researchers in the LWRS program are investigating the benefits of advanced technologies such as CBPs, with the goal of assisting utilities in decision making during modernization projects. This report will describe the existing research on CBPs, discuss the unique issues related to using CBPs in hybrid control rooms (i.e., partially modernized analog control rooms), and define the requirements of CBPs for hybrid control rooms.

  18. Screening Criteria for a Room Cooling Failure of the AFW MDP Room

    International Nuclear Information System (INIS)

    Hwang, Mee Jeong; Yoon, Churl; Yang, Joon Eon; Park, Joo Hwan

    2006-01-01

    In this paper, we performed a heat up calculation for the Auxiliary Feedwater Motor Operated Pump (AFW MDP) room, PAB-077-11A with CFX-10 and RATT when the HVAC (Heating, Ventilation, and Air Condition) system is failed. We also reviewed the operability of the components under a loss of the HVAC. Room cooling failure does not need to be modeled if the components maintain their operability after a loss of a room cooling function during the mission time. ASME Standard describes that a recovery action can be credited if the related recovery action is included in the procedure or there are similar recovery experiences in the plant. However, there is no description about the recovery action of the HVAC in the EOP (Emergency Operation Procedure) of the UCN3, 4 under the situation of a loss of the HVAC. However, if we consider the HVAC failure in the PSA FT model, the problem is that the unavailability induced from a loss of the HVAC is unrealistically high. From a viewpoint of the PSA, it is not true that the related system always fails even if the HVAC system fails. Therefore, we reviewed the necessity of the HVAC model through two cases of a room heat up calculation under the situation of a loss of the HVAC system with conservative and realistic input data respectively

  19. Characterization of a hot dry rock reservoir at Acoculco geothermal zone, Pue.; Caracterizacion de un yacimiento de roca seca caliente en la zona geotermica de Acoculco, Pue.

    Energy Technology Data Exchange (ETDEWEB)

    Lorenzo Pulido, Cecilia; Flores Armenta, Magaly Ramirez Silva, German [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico)]. E-mail: cecilia-lorenzo@cfe.gob.mx

    2011-01-15

    metamorphism due to the emplacement of intrusive rocks (hornblende granite), which was identified in the lithologic column from both wells. Based on all these features, the Acoculco geothermal zone is a candidate for development under an EGS scheme. [Spanish] Los recursos geotermicos de roca seca caliente (HDR: Hot Dry Rock), tambien conocidos actualmente como sistemas geotermicos mejorados (EGS: Enhanced Geothermal Systems), han sido investigados de tiempo atras. El concepto de HDR es muy simple. Los yacimientos mas comunes se encuentran a unos 5000 m de profundidad y estan formados por rocas impermeables que tienen una temperatura entre 150 grados centigrados y 300 grados centigrados , y no contienen ningun tipo de fluido. La temperatura es un criterio economico principal, ya que para la generacion de energia electrica se requiere una temperatura inicial mayor a los 200 grados centigrados. Para desarrollar el sistema se hacen dos perforaciones, en una de las cuales se introduce agua fria y en la otra se obtiene agua caliente. En Francia, desde junio de 2008 se encuentra en operacion una planta de 1.5 MW como parte del proyecto Soultz-sous-Forest financiado por el European Deep Geothermal Energy Programme. A fin de caracterizar los yacimientos HDR se llevo a cabo una recopilacion de informacion multidisciplinaria referente a: (1) origen de la fuente de calor, (2) informacion cuantitativa de temperatura y mecanismos de transferencia de calor natural, (3) fallas y fracturas naturales, (4) esfuerzos locales, y (5) tipo de basamento. Esta informacion se aplico a la zona geotermica de Acoculco, Pue., explorada por el Departamento de Exploracion mediante los pozos EAC-1 y EAC-2 para determinar la presencia de un yacimiento de alta temperatura (de 220 grados centigrados a mas 250 grados centigrados). Esta zona presenta las siguientes caracteristicas: (1) Origen de la fuente de calor: volcano-tectonico; (2) Los registros de temperatura mostraron valores de 263.8 grados centigrados y

  20. La luz del origen del universo

    Directory of Open Access Journals (Sweden)

    Casas, Alberto

    2015-10-01

    Full Text Available Penzias and Wilson discovered the cosmic microwave background, a luminous echo of the Big Bang, in 1965. The amount of information encoded in this relic of the early universe is truly extraordinary. At present, the most precise data about the origin and structure of the universe comes from the study of this primordial light, the full potential of which has yet to be explored.En 1965 se descubrió el fondo de radiación de microondas, un eco luminoso de la Gran Explosión (Big Bang. La cantidad de información contenida en esta reliquia del universo primitivo es verdaderamente extraordinaria. En la actualidad los datos más precisos sobre el origen y estructura del universo provienen del estudio de esta luz primigenia, que aún no ha sido explorada en todo su potencial.

  1. La educación en el Museo del Prado. Education at the Museo del Prado.

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Martínez Martínez

    2014-12-01

    Full Text Available (ES En el Museo del Prado encontramos artistas, exposiciones, guías, itinerarios. También la educa-ción se refleja en las salas del museo madrileño. El presente artículo introduce al lector-espectador, en los espacios que reproducen las pinturas, insistiendo en la obra plástica y en cómo ésta es una manifestación emocional y una concepción social del momento histórico al que pertenece el artista. (EN At the “Museo del Prado” we may find artists, exhibitions, lectures, workshops, itineraries, etc. Education is also reflected in the rooms of this museum locate din Madrid. The present article introduces the reader-spectator to the learning spaces reproduced by painting, claiming the fact of plastic art works as an emotional manifestation and a social conception of the historic moment to which the artist belongs.

  2. Room temperature isotherms for Mo and Ni

    International Nuclear Information System (INIS)

    Masse, J.L.

    1986-11-01

    Isotherms at room temperature for Mo and Ni are proposed. They are of three types: BIRCH, KEANE and BORN-MIE. The adjustable constants appearing in these isotherms have been determined from experimental quantities at zero pressure. An evaluation of the limit of (δB T /δP) T as P #-> # ∞, where B T is the isothermal bulk modulus, has been also used. These three isotherms obtained for Mo and Ni are compared with isotherms derived from shock-wave data according to the PRIETO's model. There is a good agreement between these and these derived from shock-wave data. The three isotherms proposed for Mo and Ni can be considered as valid until pressures of several B To , where B To is the bulk modulus B T at P = o [fr

  3. Magnetic heat pumping near room temperature

    Science.gov (United States)

    Brown, G. V.

    1976-01-01

    It is shown that magnetic heat pumping can be made practical at room temperature by using a ferromagnetic material with a Curie point at or near operating temperature and an appropriate regenerative thermodynamic cycle. Measurements are performed which show that gadolinium is a resonable working material and it is found that the application of a 7-T magnetic field to gadolinium at the Curie point (293 K) causes a heat release of 4 kJ/kg under isothermal conditions or a temperature rise of 14 K under adiabatic conditions. A regeneration technique can be used to lift the load of the lattice and electronic heat capacities off the magnetic system in order to span a reasonable temperature difference and to pump as much entropy per cycle as possible

  4. Lean Strategies in the Operating Room.

    Science.gov (United States)

    Robinson, Stephen T; Kirsch, Jeffrey R

    2015-12-01

    Lean strategies can be readily applied to health care in general and operating rooms specifically. The emphasis is on the patient as the customer, respect and engagement of all providers, and leadership from management. The strategy of lean is to use continuous improvement to eliminate waste from the care process, leaving only value-added activities. This iterative process progressively adds the steps of identifying the 7 common forms of waste (transportation, inventory, motion, waiting, overproduction, overprocessing, and defects), 5S (sort, simplify, sweep, standardize, sustain), visual controls, just-in-time processing, level-loaded work, and built-in quality to achieve the highest quality of patient care. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. [Controlling systems for operating room managers].

    Science.gov (United States)

    Schüpfer, G; Bauer, M; Scherzinger, B; Schleppers, A

    2005-08-01

    Management means developing, shaping and controlling of complex, productive and social systems. Therefore, operating room managers also need to develop basic skills in financial and managerial accounting as a basis for operative and strategic controlling which is an essential part of their work. A good measurement system should include financial and strategic concepts for market position, innovation performance, productivity, attractiveness, liquidity/cash flow and profitability. Since hospitals need to implement a strategy to reach their business objectives, the performance measurement system has to be individually adapted to the strategy of the hospital. In this respect the navigation system developed by Gälweiler is compared to the "balanced score card" system of Kaplan and Norton.

  6. Emergency room management of radiation accidents

    International Nuclear Information System (INIS)

    Rosenberg, R.; Mettler, F.A. Jr.

    1990-01-01

    Emergency room management of radioactively contaminated patients who have an associated medical injury requiring immediate attention must be handled with care. Radioactive contamination of the skin of a worker is not a medical emergency and is usually dealt with at the plant. Effective preplanning and on-the-scene triage will allow the seriously injured and contaminated patients to get the medical care they need with a minimum of confusion and interference. Immediate medical and surgical priorities always take precedence over radiation injuries and radioactive contamination. Probably the most difficult aspect of emergency management is the rarity of such accidents and hence the unfamiliarity of the medical staff with the appropriate procedures. The authors discuss how the answer to these problems is preplanning, having a simple and workable procedure and finally having 24-h access to experts

  7. Computational Fluid Dynamics and Room Air Movement

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm

    2004-01-01

    on the mass fraction transport equation. The importance of ?false? or numerical diffusion is also addressed in connection with the simple description of a supply opening. The different aspects of boundary conditions in the indoor environment as e.g. the simulation of Air Terminal Devices and the simulation......Nielsen, P.V. Computational Fluid Dynamics and Room Air Movement. Indoor Air, International Journal of Indoor Environment and Health, Vol. 14, Supplement 7, pp. 134-143, 2004. ABSTRACT Computational Fluid Dynamics (CFD) and new developments of CFD in the indoor environment as well as quality...... considerations are important elements in the study of energy consumption, thermal comfort and indoor air quality in buildings. The paper discusses the quality level of Computational Fluid Dynamics and the involved schemes (first, second and third order schemes) by the use of the Smith and Hutton problem...

  8. Magnetocaloric refrigeration near room temperature (invited)

    International Nuclear Information System (INIS)

    Brueck, E.; Tegus, O.; Thanh, D.T.C.; Buschow, K.H.J.

    2007-01-01

    Modern society relies on readily available refrigeration. The ideal cooling machine would be a compact, solid state, silent and energy-efficient heat pump that does not require maintenance. Magnetic refrigeration has three prominent advantages compared to compressor-based refrigeration. First, there are no harmful gases involved, second it may be built more compact as the working material is a solid and third magnetic refrigerators generate much less noise. Recently, a new class of magnetic refrigerant materials for room-temperature applications was discovered. These new materials have important advantages over existing magnetic coolants: They exhibit a large magnetocaloric effect (MCE) in conjunction with a magnetic phase transition of first order. This MCE is, larger than that of Gd metal, which is used in the demonstration refrigerators built to explore the potential of this evolving technology. In the present review, we compare the different materials considering both scientific aspects and industrial applicability

  9. Materials for Room Temperature Magnetic Refrigeration

    DEFF Research Database (Denmark)

    Hansen, Britt Rosendahl

    Magnetic refrigeration is a cooling method, which holds the promise of being cleaner and more efficient than conventional vapor-compression cooling. Much research has been done during the last two decades on various magnetic materials for this purpose and today a number of materials are considered...... candidates as they fulfill many of the requirements for a magnetic refrigerant. However, no one material stands out and the field is still active with improving the known materials and in the search for a better one. Magnetic cooling is based on the magnetocaloric effect, which causes a magnetic material...... to change its temperature when a magnetic field is applied or removed. For room temperature cooling, one utilizes that the magnetocaloric effect peaks near magnetic phase transitions and so the materials of interest all have a critical temperature within the range of 250 – 310 K. A magnetic refrigerant...

  10. Above Room Temperature Lead Salt VECSELs

    Science.gov (United States)

    Rahim, M.; Khiar, A.; Felder, F.; Fill, M.; Chappuis, D.; Zogg, H.

    2010-01-01

    Mid-infrared vertical external cavity surface emitting lasers (VECSEL) were developed for the wavelength range 4 to 5 μm. The devices are based on lead salt materials grown by MBE on BaF2 or Si substrate. The VECSELs are optically pumped with a 1.55 μm wavelength laser. They are operating up to above room temperature. An output power 6 mWp was reached at a temperature of +27°C. The VECSELs are temperature tunable and lasing is observed from ˜4.8 μm at -60°C down to ˜4.2 μm at +40°C heat sink temperature.

  11. Archivo del Duelo

    OpenAIRE

    Ferrera, Tamara

    2010-01-01

    Photos taken from the Archive of Mourning following the March 11 terrorist attacks El Archivo del Duelo. Creación de un archivo etnográfico de los Atentados del 11 de marzo en Madrid. Ministerio de Educación y Ciencia HUM2005-03490.

  12. Displasias del seno

    Directory of Open Access Journals (Sweden)

    Ernesto Andrade Valderrama

    1971-04-01

    Full Text Available En general, las Displasias no se presentan antes de la iniciación del estímulo Gonadal y tienden a desaparecer con el climaterio. Se definen entonces como las afecciones benignas del Seno, de origen endocrino.

  13. La crisi del diritto del lavoro

    Directory of Open Access Journals (Sweden)

    Alessandro Garilli

    2012-01-01

    Full Text Available Riassunto - L’Autore ripercorre in chiave critica l’evoluzione delle politiche legislative in materia di lavoro, alla luce dell’attuale fase di crisi economico finanziaria. Nell’esaminare i principali interventi normativi attuati da inizio secolo, l’Autore mette in evidenza le scelte di metodo e gli elementi di continuità che accomunano i vari provvedimenti, individuandoli nell’affannosa ricerca del punto di equilibrio tra flessibilità e garantismo. La riflessione si chiude con alcuni interrogativi sulle ultime linee di riforma del mercato del lavoro e con l’auspicio che, anche al cospetto delle imprescindibili ragioni dell’economia, il diritto del lavoro possa continuare a svolgere il proprio tradizionale ruolo di disciplina di tutela della persona.   Abstract - The author analyzes, with a critically oriented approach, the development of the employment law, in the light of the current economic and financial crisis. In examining the main regulatory measures implemented since the beginning of the century, the author highlights the methodological choices and the elements of continuity that unite the various measures, focusing them in a hard research of a point of balance between flexibility and security. The discussion concludes with some questions about the last lines of the reform of the labor market and with the hope that, even in the face of compelling reasons of economy, labor law can continue to play its traditional role of governing the protection of person.

  14. OBJETIVO DEL DESARROLLO DEL MILENIO 7

    Directory of Open Access Journals (Sweden)

    Margarita M. Pérez O.

    2013-10-01

    Full Text Available Los Objetivos de Desarrollo del Milenio, también conocidos como los Objetivos del Milenio, constituyeron las metas finales que aprobaron los dirigentes mundiales, 189 jefes de estado y de gobierno en la Cumbre del Milenio de las Naciones Unidas celebrada en Nueva York en el año 2000, en la cual los Estados miembros de la organización reafirmaron su compromiso de luchar por un mundo en el que el desarrollo sostenible y la eliminación de la pobreza tuvieran máxima prioridad1 . En la cumbre se definió la Declaración del Milenio, la cual detalla los objetivos, principios, valores, metas y acciones para erradicar la pobreza Mundial hacia el año 2015, todos ellos ratificados con alto interés y acción estratégica de carácter global, como marco para la medición de los progresos en materia de desarrollo.

  15. Elementos del sistema electoral del Congreso Mexicano

    Directory of Open Access Journals (Sweden)

    Aldo Medina García

    2013-08-01

    Full Text Available El presente artículo es un estudio de los componentes del sistema electoral, diseñado por el legislador mexicano para integrar al parlamento federal. Estudio desarrollado a sabiendas de la importancia que reviste el sistema electoral como un medio que permite a los ciudadanos convertir su voto expresado en las urnas en escaños a favor de determinado candidato o partido. En dicho análisis tomamos en cuenta la evolución constitucional del sistema electoral mexicano, la participación de las fuerzas minoritarias en la integración del Senado y de la Cámara de Diputados, la división que se hace del territorio en circunscripciones electorales, la barrera electoral que se fija a los partidos políticos para acceder a la representación en el Parlamento, la fórmula de asignación que se aplica a la votación obtenida, para finalmente concluir que el sistema electoral mexicano es esencialmente mayoritario aun cuando se vista de proporcional.

  16. La Planta de Equivalencias. Mat-rooming.

    Directory of Open Access Journals (Sweden)

    Silvia Colmenares

    2017-10-01

    Full Text Available La atención a los mecanismos por los que determinadas configuraciones arquitectónicas son capaces de adaptarse al cambio define un campo de interés que no ha hecho más que crecer desde mediados del siglo XX, tras la superación de la disyuntiva excluyente entre forma y función. Sin embargo, el peso de las estrategias basadas en el principio de planta libre es todavía mucho mayor que el de otras propuestas que no se sustentan en la independencia entre estructura portante y organización distributiva. El objetivo de este trabajo es la definición de una genealogía para la noción de planta de equivalencias que se propone como modelo de indiferencia funcional alternativo, estableciendo una conexión entre las lógicas de la arquitectura doméstica pre-burguesa y los más recientes ejemplos de experimentación programática en materia de vivienda. La reinterpretación de algunas técnicas de iteración de elementos desarrolladas en los años 60 por la generación más crítica con la modernidad canónica, junto con el análisis de su vocabulario operativo asociado, permitirán enunciar una aproximación a los patrones del habitar basada en la proliferación sistemática de la habitación como pieza genérica.

  17. The Operating Room of the Future Versus the Future of the Operating Room.

    Science.gov (United States)

    Kassam, Amin B; Rovin, Richard A; Walia, Sarika; Chakravarthi, Srikant; Celix, Juanita; Jennings, Jonathan; Khalili, Sammy; Gonen, Lior; Monroy-Sosa, Alejandro; Fukui, Melanie B

    2017-06-01

    Technological advancement in the operating room is evolving into a dynamic system mirroring that of the aeronautics industry. Through data visualization, information is continuously being captured, collected, and stored on a scalable informatics platform for rapid, intuitive, iterative learning. The authors believe this philosophy (paradigm) will feed into an intelligent informatics domain fully accessible to all and geared toward precision, cell-based therapy in which tissue can be targeted and interrogated in situ. In the future, the operating room will be a venue that facilitates this real-time tissue interrogation, which will guide in situ therapeutics to restore the state of health. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. Occurrences in control room equipment, procedures and personnel performances: IRS control room events

    International Nuclear Information System (INIS)

    Tolstykh, V.

    1994-01-01

    The IAEA/NEA Incident Reporting System (IRS) was established in the early 1980, its objective being to gain from operating experience achieved in countries with nuclear power programmes by means of exchanging information on events relevant to safety. Among the 2171 events in the database, 175 events (i.e. 8%) were identified as ''control room events''. It was decided to group these into three sets for further study: 65 events with common mode/cause failures (CCFs), 22 events with cognitive errors and 30 events with unforeseen interaction between NPP systems. It is expected that the pitfalls experienced in the IRS and the questions derived from this study will help to gain a better understanding of the needs and interests of specialists in advanced information methods and artificial intelligence in NPP control rooms. (author)

  19. Contaminant Distribution Around Persons in Rooms Ventilated by Displacement Ventilation

    DEFF Research Database (Denmark)

    Brohus, Henrik; Nielsen, Peter V.

    An optimal design of the ventilation system needs a proper prediction of the velocity, temperature and contaminant distribution in the room. Traditionally this is done either by the use of simplified models or by a somewhat more comprehensive CFD-simulation. Common to both methods is usually...... the lack of consideration for the persons present in the room. This paper deals with some of the effects of persons present in a displacement ventilated room, especially the effect on the contaminant distribution....

  20. Influence of Diffusivity in Room on its Acoustic Response

    Directory of Open Access Journals (Sweden)

    D. Šumarac Pavlović

    2010-11-01

    Full Text Available Diffusivity is a geometrical feature of the room which is proportional to the dimension of relief on its interior surfaces. This paper presents the results of analysis which investigates the correlation between diffusivity in a room and parameters calculated from a recorded impulse response. The analysis was performed using a specially prepared physical model of a parallelepipedic room with different combinations of flat and diffusive interior surfaces.

  1. Considerations concerning the ergonomics of power plant control rooms

    International Nuclear Information System (INIS)

    Herbst, L.; Hinz, W.

    1981-01-01

    Modern control rooms for the monitoring and control of large power plants have a high degree of automation. However, it is the responsibility of the control room personnel to ensure optimum process control during all operational states. The proper ergonomic design of a control room is one of the prerequisites to ensure that the operators are able to perceive the often large flow of current information and, after processing, to respond properly. (orig.) [de

  2. Photographic art in exam rooms may reduce white coat hypertension.

    Science.gov (United States)

    Harper, Michael B; Kanayama-Trivedi, Stacy; Caldito, Gloria; Montgomery, David; Mayeaux, E J; DelRosso, Lourdes M

    2015-12-01

    Blood pressure (BP) elevation in medical office settings in patients who are normotensive in nonmedical settings is an effect known as 'white coat hypertension'. This phenomenon is thought to be due to situational anxiety caused by the experience of visiting a doctor and the anxiety-inducing nature of the medical office. Our study was designed to determine if carefully selected photographic art could counter the anxiety that causes white coat hypertension and lead to lower BP recordings in some patients. 117 adults, non-pregnant patients from the Louisiana State University Health Sciences Center Family Medicine Resident Clinic participated in this study. After the triage nurse measured the BP, the patients were randomly placed in either an exam room with standard medical posters (control room) or in an exam room with photographic art (photo room). The BP was measured in the exam room. After the medical visit, the patients switched rooms and the BP was measured a third time. The patients were asked to fill out a questionnaire to identify room preference. On average, the BP obtained in the control rooms was higher than that obtained in the photo rooms. There was a statistically significant difference between the mean arterial pressure, systolic BP and diastolic BP between the control room and the photo room. Landscape photographic art may have the beneficial effect of reducing BP in medical office examination rooms. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  3. Shield design of concrete wall between decay tank room and primary pump room in TRIGA facility

    International Nuclear Information System (INIS)

    Khan, M. J. H.; Rahman, M.; Haque, A.; Zulquarnain, A.; Ahmed, F. U.; Bhuiyan, S. I.

    2007-01-01

    The objective of this study is to recommend the radiation protection design parameters from the shielding point of view for concrete wall between the decay tank room and the primary pump room in TRIGA Mark-II research reactor facility. The shield design for this concrete wall has been performed with the help of Point-kernel Shielding Code Micro-Shield 5.05 and this design was also validated based on the measured dose rate values with Radiation Survey Meter (G-M Counter) considering the ICRP-60 (1990) recommendations for occupational dose rate limit (10 μSv/hr). The recommended shield design parameters are: (i) thickness of 114.3 cm Ilmenite-Magnetite Concrete (IMC) or 129.54 cm Ordinary Reinforced Concrete (ORC) for concrete wall A (ii) thickness of 66.04 cm Ilmenite-Magnetite Concrete (IMC) or 78.74 cm Ordinary Reinforced Concrete (ORC) for concrete wall B and (iii) door thickness of 3.175 cm Mild Steel (MS) on the entrance of decay tank room. In shielding efficiency analysis, the use of I-M concrete in the design of this concrete wall shows that it reduced the dose rate by a factor of at least 3.52 times approximately compared to ordinary reinforced concrete

  4. Electrorecovery of actinides at room temperature

    Energy Technology Data Exchange (ETDEWEB)

    Stoll, Michael E [Los Alamos National Laboratory; Oldham, Warren J [Los Alamos National Laboratory; Costa, David A [Los Alamos National Laboratory

    2008-01-01

    There are a large number of purification and processing operations involving actinide species that rely on high-temperature molten salts as the solvent medium. One such application is the electrorefining of impure actinide metals to provide high purity material for subsequent applications. There are some drawbacks to the electrodeposition of actinides in molten salts including relatively low yields, lack of accurate potential control, maintaining efficiency in a highly corrosive environment, and failed runs. With these issues in mind we have been investigating the electrodeposition of actinide metals, mainly uranium, from room temperature ionic liquids (RTILs) and relatively high-boiling organic solvents. The RTILs we have focused on are comprised of 1,3-dialkylimidazolium or quaternary ammonium cations and mainly the {sup -}N(SO{sub 2}CF{sub 3}){sub 2} anion [bis(trif1uoromethylsulfonyl)imide {equivalent_to} {sup -}NTf{sub 2}]. These materials represent a class of solvents that possess great potential for use in applications employing electrochemical procedures. In order to ascertain the feasibility of using RTILs for bulk electrodeposition of actinide metals our research team has been exploring the electron transfer behavior of simple coordination complexes of uranium dissolved in the RTIL solutions. More recently we have begun some fundamental electrochemical studies on the behavior of uranium and plutonium complexes in the organic solvents N-methylpyrrolidone (NMP) and dimethylsulfoxide (DMSO). Our most recent results concerning electrodeposition will be presented in this account. The electrochemical behavior of U(IV) and U(III) species in RTILs and the relatively low vapor pressure solvents NMP and DMSO is described. These studies have been ongoing in our laboratory to uncover conditions that will lead to the successful bulk electrodeposition of actinide metals at a working electrode surface at room temperature or slightly elevated temperatures. The RTILs we

  5. Multiple Trauma and Emergency Room Management.

    Science.gov (United States)

    Frink, Michael; Lechler, Philipp; Debus, Florian; Ruchholtz, Steffen

    2017-07-24

    The care of severely injured patients remains a challenge. Their initial treatment in the emergency room is the essential link between first aid in the field and definitive in-hospital treatment. We present important elements of the initial in-hospital care of severely injured patients on the basis of pertinent publications retrieved by a selective search in PubMed and the current German S3 guideline on the care of severely and multiply traumatized patients, which was last updated in 2016. The goal of initial emergency room care is the rapid recognition and prompt treatment of acutely life-threatening injuries in the order of their priority. The initial assessment includes physical examination and ultrasonography according to the FAST concept (Focused Assessment with Sonography in Trauma) for the recognition of intraperitoneal hemorrhage. Patients with penetrating chest injuries, massive hematothorax, and/or severe injuries of the heart and lungs undergo emergency thoracotomy; those with signs of hollow viscus perforation undergo emergency laparotomy. If the patient is hemo - dynamically stable, the most important diagnostic procedure that must be performed is computerized tomography with contrast medium. Therapeutic decision-making takes the patient's physiological parameters into account, along with the overall severity of trauma and the complexity of the individual injuries. Depending on the severity of trauma, the immediate goal can be either the prompt restoration of organ structure and function or so-called damage control surgery. The latter focuses, in the acute phase, on hemostasis and on the avoidance of secondary damage such as intra-abdominal contamination or compartment syndrome. It also involves the temporary treatment of fractures with external fixation and the planning of definitive care once the patient's organ functions have been securely stabilized. The care of the severely injured patient should be performed in structured fashion according to the

  6. Foucault could have been an operating room nurse.

    Science.gov (United States)

    Riley, Robin; Manias, Elizabeth

    2002-08-01

    Operating room nursing is an under-researched area of nursing practice. The stereotypical image of operating room nursing is one of task- and technically-orientated aspects of practice, where nurses work in a medical model and are dominated by constraints from outside their sphere of influence. This paper explores the possibility of understanding operating room nursing in a different way. Using the work of Michel Foucault to analyse the work of operating room nursing, this paper argues the relevance of the framework for a more in-depth analysis of this specialty area of practice. The concepts of power, discipline and subjectivity are used to demonstrate how operating room nursing is constructed as a discipline and how operating room nurses act to govern and construct the specialty. Exemplars are drawn from extensive professional experience, from guidelines of professional operating room nursing associations, as well as published texts. The focus is predominantly on the regulation of space and time to maintain the integrity of the sterile surgical field and issues of management, as well as the use of the ethical concept of the 'surgical conscience'. This form of analysis provides a level and depth of inquiry that has rarely been undertaken in operating room nursing. As such, it has the potential to provide a much needed, different view of operation room nursing that can only help to strengthen its professional foundations and development.

  7. Multinodal control room envelope model used for habitability analysis

    International Nuclear Information System (INIS)

    Blumberg, W.M.; Gore, D.E.

    1995-01-01

    This work analyzes the habitability of the control room envelope (CRE) during an off-normal ventilation system condition. The most limiting design basis accident utilized for this analysis is the postulated loss-of-coolant accident. The off-normal condition assumes two rooms within the CRE are at pressures that are lower than adjoining rooms outside the CRE. This pressure differential allows unfiltered in-leakage to enter the CRE through the doors and penetrations in these rooms. This paper quantifies the maximum unfiltered in-leakage

  8. The operating room of the future: observations and commentary.

    Science.gov (United States)

    Satava, Richard M

    2003-09-01

    The Operating Room of the Future is a construct upon which to develop the next generation of operating environments for the patient, surgeon, and operating team. Analysis of the suite of visions for the Operating Room of the Future reveals a broad set of goals, with a clear overall solution to create a safe environment for high-quality healthcare. The vision, although planned for the future, is based upon iteratively improving and integrating current systems, both technology and process. This must become the Operating Room of Today, which will require the enormous efforts described. An alternative future of the operating room, based upon emergence of disruptive technologies, is also presented.

  9. Operation Aspect of the Main Control Room of NPP

    International Nuclear Information System (INIS)

    Sahala M Lumbanraja

    2009-01-01

    The main control room of Nuclear Power Plant (NPP) is operational centre to control all of the operation activity of NPP. NPP must be operated carefully and safely. Many aspect that contributed to operation of NPP, such as man power whose operated, technology type used, ergonomic of main control room, operational management, etc. The disturbances of communication in control room must be anticipated so the high availability of NPP can be achieved. The ergonomic of the NPP control room that will be used in Indonesia must be designed suitable to anthropometric of Indonesia society. (author)

  10. The Czech Tea Profession and the Phenomenon of Tea Rooms

    OpenAIRE

    Schröderová, Karolína

    2015-01-01

    In this bachelor thesis I have focused on the Czech tea culture and tea profession across tea rooms. I have dealt with influences that led to the present tea rooms' appearances. Furthermore I am dealing with ways of tea culture spreading, and what conduces to the tea room establishing. I am using the term of subculture in the connection with the tea culture, its meaning and position in the Czech culture. The main data source were semi- structured interviews with the tea rooms owners, all comp...

  11. Castillo del Real. Olocau

    OpenAIRE

    AUÑÓN VALLEJO, JONATAN

    2012-01-01

    El objetivo que se quiere alcanzar con este proyecto es el de realizar un estudio lo más cercano posible del Catillo del Real, de manera que se pueda conocer su origen, su evolución a lo largo de la historia, así como las diferentes técnicas y sistemas constructivos utilizados en su construcción. Auñón Vallejo, J. (2011). Castillo del Real. Olocau. http://hdl.handle.net/10251/14244. Archivo delegado

  12. La Representabilidad del Genocidio

    OpenAIRE

    Cardona González, Lorena

    2012-01-01

    El presente artículo intenta hacer una aproximación histórica y analítica al fenómeno del Genocidio, sus implicaciones sociales y culturales que dieron como resultado la reformulación analítica y conceptual de hechos que hasta entonces superaban el conocimiento y la moral humana. De este modo, se hace un trayecto histórico de la paulatina aparición del asesinato masivo como practica de Estado, enmarcado en las experiencias del genocidio armenio y el alemán. A su vez, se hace una mirada sobre ...

  13. Significado presente del CSIC

    OpenAIRE

    Garrido Gallardo, Miguel Angel

    2000-01-01

    Not available

    Este artículo, elaborado en 1999, ofrece una panorámica de la realidad del Consejo Superior de Investigaciones Científicas en la actualidad. Repasa su organización, su volumen de publicaciones, sus indicadores de productividad, su capacidad de obtener recursos y, en suma, su lugar en el conjunto del sistema español de Ciencia y Tecnología, considerado en sí mismo y en relación con la Universidad. Como conclusión del repaso de datos, se afirma que, aunque la fó...

  14. Tratamiento del pie equino

    OpenAIRE

    Robles, Fernanda

    2012-01-01

    El pie equino varo es una patología frecuente en los pacientes con Encefalopatía crónica no evolutiva (ECNE).Se observó que existe una mayor frecuencia en el sexo masculino. Se realizó un estudio descriptivo, comparativo y secundario, durante el periodo de septiembre del 2006 a septiembre del 2011, con un total de 125 pacientes con Ecne, de los cuales se encontraron 101 con pie equino varo congénito. Objetivo: observar los resultados obtenidos en la rehabilitación del pie equino, en niños de ...

  15. Del Pasadismo al Futurismo

    OpenAIRE

    Agudo-Martínez, M. J.

    2003-01-01

    Uno de los habituales prejuicios a la hora de abordar el análisis del movimiento futurista, al igual que sucede con el constructivismo, es la consideración del contexto político en el que se desarrollaron ambas vanguardias. Sin embargo, y dejando a un lado un enfoque del arte con finalidad política de signo diverso, habría que insistir en el hecho de que posiblemente sean tanto el futurismo italiano como el constructivismo ruso, los movimientos que con mayor entusiasmo se manifestaron, en un ...

  16. Impacto do uso da prova rápida para estreptococo beta-hemolítico do grupo A no diagnóstico e tratamento da faringotonsilite aguda em pronto-socorro de Pediatria Impacto del uso de la prueba rápida para estreptococos beta-hemolíticos del grupo A en el diagnóstico y tratamiento de la faringotonsilitis en emergencia de Pediatría Impact of the rapid antigen detection test in diagnosis and treatment of acute pharyngotonsillitis in a Pediatric emergency room

    Directory of Open Access Journals (Sweden)

    Débora Morais Cardoso

    2013-03-01

    Full Text Available OBJETIVO: Avaliar o impacto da realização rotineira da prova rápida para pesquisa de estreptococo do grupo A no diagnóstico e tratamento da faringotonsilite aguda em crianças. MÉTODOS: Estudo prospectivo e observacional que contou com a utilização de protocolo de pesquisa estabelecido na Unidade de Emergência do Hospital Universitário da Universidade de São Paulo para o atendimento de crianças e adolescentes com faringotonsilite aguda. RESULTADOS: Com base na avaliação clínica, dos 650 pacientes estudados, antimicrobianos seriam prescritos para 389 indivíduos (59,8% e, com o uso da pesquisa de estreptococo do grupo A, foram prescritos em 286 pacientes (44,0%. Das 261 crianças que não receberiam antibiótico pelo quadro clínico, 111 (42,5% tiveram pesquisa de estreptococo do grupo A positiva. O diagnóstico baseado no quadro clínico apresentou sensibilidade de 61,1%, especificidade de 47,7%, valor preditivo positivo de 44,9% e valor preditivo negativo de 57,5%. CONCLUSÕES: O diagnóstico clínico da faringotonsilite estreptocócica mostrou baixa sensibilidade e especificidade. O uso rotineiro da prova rápida para pesquisa de estreptococo permitiu a redução do uso de antibióticos e a identificação de um grupo de risco para as complicações da infecção estreptocócica, pois 42,5% dos pacientes com prova rápida positiva não receberiam antibióticos, se levado em consideração apenas o diagnóstico clínico.OBJETIVO: Evaluar el impacto de la realización de rutina de la prueba rápida para investigación de estreptococos del grupo A en el diagnóstico y tratamiento de la faringotonsilitis aguda en niños. MÉTODOS: Estudio prospectivo y observacional que contó con el uso de protocolo de investigación establecido en la Unidad de Emergencia del Hospital Universitario de la USP para la atención a niños y adolescentes con faringotonsilitis aguda. RESULTADOS: Con base en la evaluación crítica, de los 650 pacientes

  17. Edificio Playa, en la Costa del Sol

    Directory of Open Access Journals (Sweden)

    Cassinello, Fernando

    1964-02-01

    Full Text Available This apartment block has been built on the Costa del Sol, in Almeria, only a few metres from the seashore. It is meant to provide the following facilities. Changing rooms for bathers, and a night club, in the basement. Restaurant and bar on the ground floor. Twelve living apartments on the six standard floor levels; two apartments per storey. Porter's house in the attic. As the foundations are in the sand, and the building is exposed to strong coastal winds, the structural design has, as interesting features, the foundation ribbed slab and the transversal portal frames, which are W shaped on the ground level. This arrangement makes the edifice look lighter and it acquires a more dynamic plasticity.En la Costa del Sol de Almería y a muy pocos metros de la orilla del mar, se ha construido este edificio de apartamentos. Su programa es el siguiente: casetas de baño y sala de fiestas, en sótano; restaurante-bar, en planta baja; doce viviendas, en las seis plantas tipo, con dos viviendas por planta; y vivienda del portero en ático. Cimentado sobre arena y expuesto a los fuertes vientos que azotan la costa, la solución estructural ofrece el interés de su tipo de cimentación por placa nervada, y de sus pórticos transversales que en planta baja adoptan forma de W, con lo que el edificio adquiere un aspecto de mayor ligereza y de dinamismo plástico.

  18. Safety status system for operating room devices.

    Science.gov (United States)

    Guédon, Annetje C P; Wauben, Linda S G L; Overvelde, Marlies; Blok, Joleen H; van der Elst, Maarten; Dankelman, Jenny; van den Dobbelsteen, John J

    2014-01-01

    Since the increase of the number of technological aids in the operating room (OR), equipment-related incidents have come to be a common kind of adverse events. This underlines the importance of adequate equipment management to improve the safety in the OR. A system was developed to monitor the safety status (periodic maintenance and registered malfunctions) of OR devices and to facilitate the notification of malfunctions. The objective was to assess whether the system is suitable for use in an busy OR setting and to analyse its effect on the notification of malfunctions. The system checks automatically the safety status of OR devices through constant communication with the technical facility management system, informs the OR staff real-time and facilitates notification of malfunctions. The system was tested for a pilot period of six months in four ORs of a Dutch teaching hospital and 17 users were interviewed on the usability of the system. The users provided positive feedback on the usability. For 86.6% of total time, the localisation of OR devices was accurate. 62 malfunctions of OR devices were reported, an increase of 12 notifications compared to the previous year. The safety status system was suitable for an OR complex, both from a usability and technical point of view, and an increase of reported malfunctions was observed. The system eases monitoring the safety status of equipment and is a promising tool to improve the safety related to OR devices.

  19. Waste isolation pilot plant disposal room model

    Energy Technology Data Exchange (ETDEWEB)

    Butcher, B.M.

    1997-08-01

    This paper describes development of the conceptual and mathematical models for the part of the Waste Isolation Pilot Plant (WIPP) repository performance assessment that is concerned with what happens to the waste over long times after the repository is decommissioned. These models, collectively referred to as the {open_quotes}Disposal Room Model,{close_quotes} describe the repository closure process during which deformation of the surrounding salt consolidates the waste. First, the relationship of repository closure to demonstration of compliance with the Environmental Protection Agency (EPA) standard (40 CFR 191 Appendix C) and how sensitive performance results are to it are examined. Next, a detailed description is provided of the elements of the disposal region, and properties selected for the salt, waste, and other potential disposal features such as backfill. Included in the discussion is an explanation of how the various models were developed over time. Other aspects of closure analysis, such as the waste flow model and method of analysis, are also described. Finally, the closure predictions used in the final performance assessment analysis for the WIPP Compliance Certification Application are summarized.

  20. Pedestrian collective motion in competitive room evacuation.

    Science.gov (United States)

    Garcimartín, A; Pastor, J M; Martín-Gómez, C; Parisi, D; Zuriguel, I

    2017-09-07

    When a sizable number of people evacuate a room, if the door is not large enough, an accumulation of pedestrians in front of the exit may take place. This is the cause of emerging collective phenomena where the density is believed to be the key variable determining the pedestrian dynamics. Here, we show that when sustained contact among the individuals exists, density is not enough to describe the evacuation, and propose that at least another variable -such as the kinetic stress- is required. We recorded evacuation drills with different degrees of competitiveness where the individuals are allowed to moderately push each other in their way out. We obtain the density, velocity and kinetic stress fields over time, showing that competitiveness strongly affects them and evidencing patterns which have been never observed in previous (low pressure) evacuation experiments. For the highest competitiveness scenario, we detect the development of sudden collective motions. These movements are related to a notable increase of the kinetic stress and a reduction of the velocity towards the door, but do not depend on the density.

  1. Waste isolation pilot plant disposal room model

    International Nuclear Information System (INIS)

    Butcher, B.M.

    1997-08-01

    This paper describes development of the conceptual and mathematical models for the part of the Waste Isolation Pilot Plant (WIPP) repository performance assessment that is concerned with what happens to the waste over long times after the repository is decommissioned. These models, collectively referred to as the open-quotes Disposal Room Model,close quotes describe the repository closure process during which deformation of the surrounding salt consolidates the waste. First, the relationship of repository closure to demonstration of compliance with the Environmental Protection Agency (EPA) standard (40 CFR 191 Appendix C) and how sensitive performance results are to it are examined. Next, a detailed description is provided of the elements of the disposal region, and properties selected for the salt, waste, and other potential disposal features such as backfill. Included in the discussion is an explanation of how the various models were developed over time. Other aspects of closure analysis, such as the waste flow model and method of analysis, are also described. Finally, the closure predictions used in the final performance assessment analysis for the WIPP Compliance Certification Application are summarized

  2. Workplace culture among operating room nurses.

    Science.gov (United States)

    Eskola, Suvi; Roos, Mervi; McCormack, Brendan; Slater, Paul; Hahtela, Nina; Suominen, Tarja

    2016-09-01

    To investigate the workplace culture in the Operating Room (OR) environment and the factors associated with it. In health care, the workplace culture affects the delivery and experience of care. The OR can be a stressful practice environment, where nurses might have occasionally either job stress or job satisfaction based on their competence. A quantitative cross-sectional approach was used. The study consisted of 96 Finnish OR nurses. A Nursing Context Index instrument was used to obtain data by way of an electronic questionnaire. The primary role and working unit of respondents were the main components relating to workplace culture, and especially to job stress. Nurse anaesthetists were found to be slightly more stressed than scrub nurses. In local hospitals, job stress related to workload was perceived less than in university hospitals (P = 0.001). In addition, OR nurses in local hospitals were more satisfied with their profession (P = 0.007), particularly around issues concerning adequate staffing and resources (P = 0.001). It is essential that nurse managers learn to recognise the different expressions of workplace culture. In particular, this study raises a need to recognise the factors that cause job stress to nurse anaesthetists. © 2016 John Wiley & Sons Ltd.

  3. Human reliability analysis of control room operators

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Isaac J.A.L.; Carvalho, Paulo Victor R.; Grecco, Claudio H.S. [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil)

    2005-07-01

    Human reliability is the probability that a person correctly performs some system required action in a required time period and performs no extraneous action that can degrade the system Human reliability analysis (HRA) is the analysis, prediction and evaluation of work-oriented human performance using some indices as human error likelihood and probability of task accomplishment. Significant progress has been made in the HRA field during the last years, mainly in nuclear area. Some first-generation HRA methods were developed, as THERP (Technique for human error rate prediction). Now, an array of called second-generation methods are emerging as alternatives, for instance ATHEANA (A Technique for human event analysis). The ergonomics approach has as tool the ergonomic work analysis. It focus on the study of operator's activities in physical and mental form, considering at the same time the observed characteristics of operator and the elements of the work environment as they are presented to and perceived by the operators. The aim of this paper is to propose a methodology to analyze the human reliability of the operators of industrial plant control room, using a framework that includes the approach used by ATHEANA, THERP and the work ergonomics analysis. (author)

  4. Information presentation in power plant control rooms

    International Nuclear Information System (INIS)

    Kautto, A.

    1984-11-01

    The objective of this study is to support operators' work especially in the control rooms of power plant. The exemplified process is a pressurized water (nuclear) reactor (PWR). The man-process interface is an information system that covers information refining, information presentation, information system handling, and process control. THe emphasis in this study is on the organization and presentation of information and on the alert function that is part of the information system. Another goal is to design the alert function so as to radically reduce the number of alarms during plant shutdown, e.g. during the refuelling or maintenance period and during a disturbance. Further, the experimental validation of CFMS (Critical Function Monitoring System), developed by Combustion Engineering, Inc. in the U.S.A. is described briefly. The validation was made at the Loviisa training simulator in the autumn of 1982. CFMS is a safety-related functional alarm system. The functional decomposition of information has turned out to be successful and it is helpful in designing displays. Preliminary criteria for designing displays, the structure of the information presentation system and the illustration of main interactions are presented. General practical ideas on designing the alert function seem very promising. Preliminary results of the CFMS validation are presented. Further, some ideas are presented on how to carry out the analysis and how to make such validations in the future. A new idea for the evaluation of core safety is presented, based on control theory concepts

  5. Titanium nitride room-temperature ferromagnetic nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Morozov, Iu.G., E-mail: morozov@ism.ac.ru [Institute of Structural Macrokinetics and Materials Science, Russian Academy of Sciences, 8 Academician Osipyan Street, Chernogolovka, Moscow Region, 142432 (Russian Federation); Belousova, O.V. [Institute of Structural Macrokinetics and Materials Science, Russian Academy of Sciences, 8 Academician Osipyan Street, Chernogolovka, Moscow Region, 142432 (Russian Federation); Belyakov, O.A. [Ogarev Mordovia State University, Saransk, 68 Bol' shevistskaya Street, 430005 (Russian Federation); Parkin, I.P., E-mail: i.p.parkin@ucl.ac.uk [Department of Chemistry, Materials Chemistry Research Centre, University College London, 20 Gordon Street, London, WC1H 0AJ (United Kingdom); Sathasivam, S. [Department of Chemistry, Materials Chemistry Research Centre, University College London, 20 Gordon Street, London, WC1H 0AJ (United Kingdom); Kuznetcov, M.V., E-mail: maxim1968@mail.ru [All-Russian Research Institute on Problems of Civil Defense and Emergencies of Emergency Control Ministry of Russia (EMERCOM), 7 Davidkovskaya Street, Moscow, 121352 (Russian Federation)

    2016-08-05

    Cubic and near-spherical TiN nanoparticles ranging in average size from 20 to 125 nm were prepared by levitation-jet aerosol synthesis through condensation of titanium vapor in an inert gas flow with gaseous nitrogen injection. The nanoparticles were characterized by using scanning electron microscopy (SEM), X-ray diffraction (XRD), BET measurements, UV–Vis, FT-IR, Raman spectroscopy, XPS, and vibrating-sample magnetometry. Room-temperature ferromagnetism with maximum magnetization up to 2.5 emu/g was recorded for the nanoparticles. The results indicate that the observed ferromagnetic ordering was related to the defect Ti–N structures on the surface of nanoparticles. This suggestion is in good correlation with the measured spectroscopical data. - Highlights: • Levitation-jet aerosol synthesis of TiN nanoparticles (NPs). • SEM, XRD, BET, UV–vis, FT-IR, Raman, XPS and magnetic characterization of the NPs. • Correlation between optical and XPS measurements data and maximum magnetization of the NPs.

  6. Web Based Room Monitoring System Using Webcam

    Directory of Open Access Journals (Sweden)

    Tole Sutikno

    2008-04-01

    Full Text Available A security has become very important along with the increasing number of crime cases. If some security system fails, there is a need for a mechanism that capable in recording the criminal act. Therefore, it can be used for investigation purpose of the authorities. The objective of this research is to develop a security system using video streaming that able to monitor in real-time manner, display movies in a browser, and record a video as triggered by a sensor. This monitoring system comprises of two security level camera as a video recorder of special events based on infrared sensor that is connected to a microcontroller via serial communication and camera as a real-time room monitor. The hardware system consists of infrared sensor circuit to detect special events that is serially communicated to an AT89S51 microcontroller that controls the system to perform recording process, and the software system consists of a server that displaying video streaming in a webpage and a video recorder. The software for video recording and server camera uses Visual Basic 6.0 and for video streaming uses PHP 5.1.6. As the result, the system can be used to record special events that it is wanted, and can displayed video streaming in a webpage using LAN infrastructure.

  7. Preferencias del Turista

    Directory of Open Access Journals (Sweden)

    Jose Luis Leiva Olivencia

    2015-01-01

    Full Text Available Actualmente existen aplicaciones orientadas al turismo basadas en realidad aumentada, pero no integran técnicas de recomendación. Este articulo describe RAMCAT (Realidad Aumentada Móvil Contextual Aplicada al Turismo un modelo de guía turística, que recomienda puntos de interés, teniendo en cuenta factores como preferencias personales y atributos contextuales. Se presentan los componentes teóricos de la arquitectura propuesta, así como sus características, destacando la integración de diferentes sistemas de recomendación, que permiten añadir nuevos motores en el futuro. El articulo se centra en describir sus funcionalidades y el modulo correspondiente al sistema de recomendación basado en el perfil del turista. Otra característica importante del sistema propuesto es la retroalimentación del mismo mediante calificaciones del turista y su trazabilidad.

  8. Carta del Editor

    Directory of Open Access Journals (Sweden)

    Luis Eladio Proaño

    2015-01-01

    Full Text Available La millonaria contratación del futbolista David Beckham, un fenómeno del mercado, ha provocado cuestionamientos a los que se busca respuesta. Es tema de análisis el por qué el betseller "Harry Potter" ha causado tanta conmoción en la opinión pública. Respecto al periodista cibernético, se señalan los contornos del presente y atisban las posibilidades del futuro de esta nueva profesión. El tratamiento de los mitos de la prensa, los temores de la Ley mordaza venezolana y la brutalidad de los video juegos e Internet son temas de enorme interés. Se comenta las pocas veces que la prensa reflexiona sobre la comunicación corporal y la anorexia.

  9. Los muertos del Floreanismo

    Directory of Open Access Journals (Sweden)

    Enrique Ayala Mora

    2008-06-01

    Full Text Available El artículo analiza el crimen político durante las primeras décadas de vida de la República del Ecuador. Específicamente centra su estudio en el período dominado por la figura de Juan José Flores, primer presidente del Ecuador. La inestabilidad política, la precariedad de las alianzas entre las élites regionales, la crisis económica generada por las guerras de Independencia, las conspiraciones y la violencia que caracterizaron al período de surgimiento de las repúblicas andinas hicieron del crimen político un “vicio de nacimiento”. El asesinato del general Antonio José de Sucre, la muerte de los miembros de la sociedad El Quiteño Libre, el homicidio de Juan Otamendi, entre otros, hicieron patente esta característica.

  10. Niveles del aprendizaje organizacional

    OpenAIRE

    Garzón Castrillón, Manuel Alfonso

    2005-01-01

    En la propuesta de modelo de aprendizaje organizacional (AO), la segunda variable se denomina niveles del aprendizaje organizacional ; los niveles de aprendizaje que contemplamos para nuestra investigación son: individual, de equipo, organizacional e interorganizacional.

  11. La escritura del Yo

    Directory of Open Access Journals (Sweden)

    Patricio Landaeta Mardones

    2013-11-01

    Full Text Available Si la creación de una imagen fidedigna del mundo fue la condición de la conquista cognitiva y económica de la tierra, las imágenes mediáticas circulan hoy en día a la manera de un montaje que organiza los sujetos como elementos de un territorio. En esta presentación abordaremos el cruce entre estos dos hechos, entre la escritura del mundo y la de los sujetos, a partir de la idea de Fabulación para mostrar otra escritura del mundo y del yo, leyendo textos e imágenes de la Primera buena Corónica y Buen Gobierno de Felipe Guaman Poma de Ayala.

  12. Capilla del Colegio de Santa María del Pilar, Madrid

    Directory of Open Access Journals (Sweden)

    Moya Blanco, Luis

    1965-09-01

    Full Text Available This chapel has two levels. The lower one contains a lecture hall, including facilities for showing films, various small rooms for congregation meetings and study circles, washing rooms, boiler room, and installations for air conditioning. The chapel itself is on the higher floor. There is a vestibule, which also leads to the sacristy, so that priests must walk along the church axis to reach the presbytery. In front of the vestibule, on the left, there is an outdoor mast, supporting bells, half way up its height, and a large cross at the top.La capilla consta de dos plantas: semisótano dedicado a salón de conferencias, con cabina de proyección, varias salitas de reunión para congregaciones y círculo de estudios, aseos, salón de calderas y cuarto de máquinas de la instalación de calefacción por aire. La planta superior es la capilla, propiamente dicha, precedida de un vestíbulo desde el que se accede a la sacristía, de modo que los sacerdotes recorren todo el eje de la capilla para llegar al presbiterio. Delante del vestíbulo, en el lado izquierdo, hay un mástil exterior, que lleva las campanas a inedia altura y está rematado por una gran cruz.

  13. Consideraciones alrededor del Libro del Almismo, el Libro del Pensar.

    Directory of Open Access Journals (Sweden)

    MartaLucía Tamayo Fernandez

    1999-12-01

    Full Text Available

    La doctora MarthaLucía Tamayo comparte muchas inquietudes alrededor del Libro del Almismo, el Libro del Pensar; de dónde salió ese nombre; de juntar en medicina y en genética a tres escritores como lo son Jorge Luis Borges, Macedonio Fernández y Julio Cortázar. Su conferencia dice así:

    El término almismo fue ideado por Macedonio Fernández porque defendía mucho el ensimismamiento y el pensamiento hacia el interior, mirar hacia adentro; cada uno somos un “sí mismo” que nos hace diferentes aunque al mismo tiempo podemos ser iguales. Todos tenemos esa parte interior que la medicina debe trabajar y que no puede olvidar.

    “El Libro del Almismo, el libro del pensar” nos lleva a replantear y a repensar un poco la medicina que queremos, una medicina vuelta a pensar.

    Quiero contarles la historia de cómo se llegó a este libro y por qué y para qué se sigue trabajando en estos temas: Después de mi internado y de un trabajo un poco triste de rural, volví al Instituto de Genética y a la Universidad Javeriana en donde encontré al doctor Bernal y un espacio que estaba buscando para esa medicina diferente que quería, con un grupo de personas que me permitía no sólo ver la medicina sino ver muchas otras cosas más; había espacio para la literatura, para Mafalda, para hablar de niños, de locos, había incluso tiempo para hablar de medicina dentro del golf, de carros antiguos y de todo eso fui aprendiendo.

    Eso era lo que estaba buscando. Una medicina que diera espacios diferentes, que fuera más humanizada. Rápidamente me ubiqué y me quedé! No me arrepiento en lo absoluto de haberme quedado porque fue, ha sido y sigue siendo, una experiencia enriquecedora, de muchas vivencias importantes. Sabía exactamente dónde estaba y sabía que había que seguir rápido y había que trabajar muchos aspectos de esa medicina que estábamos buscando y de esa genética especial.

    Rápidamente empezamos a trabajar

  14. Actualidad del relativismo cultural

    OpenAIRE

    Sánchez Durá, Nicolás

    2013-01-01

    Este ensayo tiene tres propósitos. En primer lugar, propone examinar las relaciones entre etnocentrismo y relativismo. El etnocentrismo puede tomar tres formas distintas: a saber, la de una universalidad impostada, la del exotismo y la de un particularismo narcisista exacerbado. El relativismo cultural es una postura que asume la inconmensurabilidad de los conceptos y valores que deben ser considerados como válidos dentro de las imágenes del mundo definidas. En segundo lugar, se argumenta que...

  15. el Valle del Cauca

    Directory of Open Access Journals (Sweden)

    Carlos Humberto Ortiz

    2007-01-01

    Full Text Available Este artículo se enfoca en la identi- ficación de aquellos factores estructurales que explican la pérdida de dinamismo económico de largo plazo en Colombia y, en particular, en el Valle del Cauca. Se examina la competitividad del Valle en relación con Colombia y con el resto del mundo. Se cuestiona la insistencia en una estrategia exportadora como dinamizadora del desarrollo económico. Se identifica que una gran parte de la población está excluida de los beneficios del desarrollo económico. Para construir un modelo de desarrollo que incluya a esta población se recomienda recuperar la senda de la industrialización, invertir en el capital humano (educación de alta calidad, salud, salubridad y nutrición, e invertir en infraestructura. La participación del Estado en estas inversiones sociales es necesaria para disminuir la desigualdad y aumentar el crecimiento económico.

  16. Espectroscopia del Cometa Halley

    Science.gov (United States)

    Naranjo, O.; Fuenmayor, F.; Ferrin, L.; Bulka, P.; Mendoza, C.

    1987-05-01

    Se reportan observaciones espectroscópicas del cometa Halley. Los espectros fueron tomados usando el espectrógrafo del telescopio reflector de 1 metro del Observatorio Nacional de Venezuela. Se utilizó óptica azul, con una red de difracción de 600 lineas/min, obteniéndose una dispersión de 74.2 A/mm y una resolución de 2.5 A, en el rango espectral de 3500 a 6500 A. Seis placas fueron tomadas con emulsión IIa-O y dos con IIa-D. Los tiempos de exposición fueron entre 10 y 150 minutos. El cometa se encontraba entre 0.70 y 1.04 UA del Sol, y entre 1.28 y 0.73 UA de la Tierra. Las emisiones más prominentes en el espectro, son las del CN, C2, y C3. Otras emisiones detectadas corresponden a CH, NH2 y Na. Los espectros muestran un fuerte continuo, indicando un contenido significativo de polvo. Se detectó mayor intensidad del contínuo, en la dirección anti solar, lo cual es evidencia de la cola de polvo.

  17. Inventario nacional del uso actual del agua

    OpenAIRE

    Oficina Nacional de Evaluación de Recursos Naturales

    1984-01-01

    Establece como se emplea el agua en el Perú, teniendo en cuenta el tipo de uso, consuntivo y no consuntivo, discriminando según sea el destino: agrícola, pecuario, poblacional,industrial, minero, energético y pesquero, así como su localización geográfica; ello con la finalidad de que sirva de información básica para la planificación del desarrollo.

  18. Electrochemical behavior of synthesized Al{sub x}Sn{sub y} with mechanical grinding in hydrogen evolution reaction (HER); Comportamiento electroquimico del Al{sub x}Sn{sub y} sintetizado por molienda mecanica en la REH (Reaccion de Evolucion de Hidrogeno)

    Energy Technology Data Exchange (ETDEWEB)

    Olvera Vazquez, S. L.; Arce Estrada, E. M. [Instituto Politecnico Nacional, Mexico, D.F. (Mexico )]. E-mail: seydyliz@hotmail.com

    2009-09-15

    Currently, the best catalyst for HER is Pt, nevertheless because of its high costs, many studies have been performed with a variety of materials, including AI, which is a promising source of hydrogen. Therefore, this work studied the effect of tin on Al{sub x}Sn{sub y} alloys obtained by mechanical grinding. The materials obtained were characterized with electron sweep microscopy, x-ray diffraction and electrochemical techniques. It was determined that the synthesized materials have a micrometer size and present at least two phases. The electrochemical characterization for use as electrocatalysts for the hydrogen evolution reaction (HER) was performed in an NaCl 2 M solution using potentiodynamic polarization and chronoamperometry techniques, showing that the materials with low tin contents have better electrocatalytic activity for HER. [Spanish] Actualmente el mejor catalizador para la REH es el Pt, sin embargo debido a sus altos costos se han realizado numerosos estudios con diversos materiales entre los cuales se encuentra el Al, que es una promisoria fuente de hidrogeno. Por tal motivo en este trabajo se realizaron estudios del efecto que presenta el contenido de estano en aleaciones Al{sub x}Sn{sub y} obtenidas por molienda mecanica. Los materiales obtenidos se caracterizaron por microscopia electronica de barrido, difraccion de rayos X y tecnicas electroquimicas. Se determino que los materiales sintetizados son de tamano micrometrico y que al menos presentan dos fases. La caracterizacion electroquimica para su uso como electrocatalizadores para la reaccion de evolucion de hidrogeno, REH, se llevo a cabo en una solucion de NaCl 2 M, empleando las tecnicas de polarizacion potenciodinamica y cronoamperometria, observandose que los materiales con contenidos bajos de estano presentan una mejor actividad electrocatalitica para la REH.

  19. Control room habitability in Spanish Nuclear Power Plants

    International Nuclear Information System (INIS)

    Mediavilla, F.; Sierra, J. J.

    2007-01-01

    Since the NRC published in 2003 the Generic Letter 2003-01 Control room Habitability and the Regulatory guide 1.197 Demonstrating Control Room Envelope Integrity at Nuclear Power Reactors, where it is emphasized the importance of verifying the control room habitability by means of alternative methods, Spanish Nuclear Power Plants are undertaking the different necessary activities to fulfill the requirements of the regulatory commission. This paper describes the main mechanisms included in NEI 99-03 Nuclear Energy Institute publication Control room Habitability Assessment guidance, to demonstrate and maintain Control room Habitability. In addition, in this article it Ds shown the theoretical principle of the test used to quantify air in-leakage in a control room envelope by using tracer gas techniques. The necessary activities to perform the initial in leakage testing are also put forward. Since 2006 Tecnatom, S. A. has performed the baseline testing in four Spanish Units, all of them with successful results. The rest of the Plants are scheduled to perform the tests during the second half of this year. Finally, this document summarises the more important aspects to be taken into account in the development of control room Habitability Programs, which are expected to ensure the integral maintenance of the Control room Envelope during the life a plant. (Author)

  20. Reaction of Medical Students to Experiences in Dissection Room ...

    African Journals Online (AJOL)

    Conclusion: The present study findings show that smell of the dissection room, touch and fear of cadaver were the commonest cause of their symptoms experienced while study in dissection room for the majority of students. Thus, instructors are should give awareness raising education before the commencement of the ...

  1. Creys-Malville control room and data processing

    International Nuclear Information System (INIS)

    Decuyper, J.

    1984-01-01

    After a brief definition of the control of a plant, this article presents the Creys-Malville control room: control means display and considerations on ergonomy and specific features in respect of the PWR control room. The Creys-Malville data processing is then rapidly presented with a brief description, the different data treatments and the specificity of the centralised data computer [fr

  2. 9 CFR 590.522 - Breaking room operations.

    Science.gov (United States)

    2010-01-01

    ... personnel. (m) Ingredients and additives used in, or for, processing egg products, shall be handled in a..., Processing, and Facility Requirements § 590.522 Breaking room operations. (a) The breaking room shall be kept... clean and reasonably dry during breaking operations and free of egg meat and shells. (b) All breaking...

  3. Calculation of Vertical Temperature Gradients in Heated Rooms

    DEFF Research Database (Denmark)

    Overby, H.; Steen-Thøde, Mogens

    This paper deals with a simple model which predicts the vertical temperature gradient in a heated room. The gradient is calculated from a dimensionless temperature profile which is determined by two room air temperatures only, the mean temperature in the occupied zone and the mean temperature...

  4. 16 CFR Appendix E to Part 305 - Room Air Conditioners

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Room Air Conditioners E Appendix E to Part 305 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULE... Appendix E to Part 305—Room Air Conditioners Range Information Manufacturer's rated cooling capacity in Btu...

  5. Human-Like Room Segmentation for Domestic Cleaning Robots

    Directory of Open Access Journals (Sweden)

    David Fleer

    2017-11-01

    Full Text Available Autonomous mobile robots have recently become a popular solution for automating cleaning tasks. In one application, the robot cleans a floor space by traversing and covering it completely. While fulfilling its task, such a robot may create a map of its surroundings. For domestic indoor environments, these maps often consist of rooms connected by passageways. Segmenting the map into these rooms has several uses, such as hierarchical planning of cleaning runs by the robot, or the definition of cleaning plans by the user. Especially in the latter application, the robot-generated room segmentation should match the human understanding of rooms. Here, we present a novel method that solves this problem for the graph of a topo-metric map: first, a classifier identifies those graph edges that cross a border between rooms. This classifier utilizes data from multiple robot sensors, such as obstacle measurements and camera images. Next, we attempt to segment the map at these room–border edges using graph clustering. By training the classifier on user-annotated data, this produces a human-like room segmentation. We optimize and test our method on numerous realistic maps generated by our cleaning-robot prototype and its simulated version. Overall, we find that our method produces more human-like room segmentations compared to mere graph clustering. However, unusual room borders that differ from the training data remain a challenge.

  6. Low-Reynolds Number Effects in Ventilated Rooms

    DEFF Research Database (Denmark)

    Davidson, Lars; Nielsen, Peter V.; Topp, Claus

    In the present study, we use Large Eddy Simulations (LES) which is a suitable method for simulating the flow in ventilated rooms at low Reynolds number.......In the present study, we use Large Eddy Simulations (LES) which is a suitable method for simulating the flow in ventilated rooms at low Reynolds number....

  7. Christian IV's Winter Room and Studiolo at Rosenborg Castle

    DEFF Research Database (Denmark)

    Wadum, Jørgen

    2015-01-01

    An account of the creation of the highly decorated ensemble forming the Winter Room and the Writing Room, Christian 4s private quarters at Rosenborg Castle. Art historical, technical analysis reveals new evidence on the working practice of Danish and Antwerp artists and craftsmen in the first...

  8. Distribution of Carbon Dioxide Produced by People in a Room:

    DEFF Research Database (Denmark)

    Naydenov, Kiril Georgiev; Baránková, Petra; Sundell, Jan

    2004-01-01

    Carbon dioxide exhaled by people can be used as a tracer gas for air change measurements in homes. Good mixing of tracer gas with room air is a necessary condition to obtain accurate results. However, the use of fans to ensure mixing is inconvenient. The natural room distribution of metabolic CO2...

  9. Monitoring proton radiation therapy with in-room PET imaging

    International Nuclear Information System (INIS)

    Zhu Xuping; Ouyang Jinsong; El Fakhri, Georges; Espana, Samuel; Daartz, Juliane; Liebsch, Norbert; Paganetti, Harald; Bortfeld, Thomas R

    2011-01-01

    We used a mobile positron emission tomography (PET) scanner positioned within the proton therapy treatment room to study the feasibility of proton range verification with an in-room, stand-alone PET system, and compared with off-line equivalent studies. Two subjects with adenoid cystic carcinoma were enrolled into a pilot study in which in-room PET scans were acquired in list-mode after a routine fractionated treatment session. The list-mode PET data were reconstructed with different time schemes to generate in-room short, in-room long and off-line equivalent (by skipping coincidences from the first 15 min during the list-mode reconstruction) PET images for comparison in activity distribution patterns. A phantom study was followed to evaluate the accuracy of range verification for different reconstruction time schemes quantitatively. The in-room PET has a higher sensitivity compared to the off-line modality so that the PET acquisition time can be greatly reduced from 30 to 15 O component and lower biological washout. For soft tissue-equivalent material, the distal fall-off edge of an in-room short acquisition is deeper compared to an off-line equivalent scan, indicating a better coverage of the high-dose end of the beam. In-room PET is a promising low cost, high sensitivity modality for the in vivo verification of proton therapy. Better accuracy in Monte Carlo predictions, especially for biological decay modeling, is necessary.

  10. Comparison of test protocols for standard room/corner tests

    Science.gov (United States)

    R. H. White; M. A. Dietenberger; H. Tran; O. Grexa; L. Richardson; K. Sumathipala; M. Janssens

    1998-01-01

    As part of international efforts to evaluate alternative reaction-to-fire tests, several series of room/comer tests have been conducted. This paper reviews the overall results of related projects in which different test protocols for standard room/corner tests were used. Differences in the test protocols involved two options for the ignition burner scenario and whether...

  11. Estimation of acoustic resonances for room transfer function equalization

    DEFF Research Database (Denmark)

    Gil-Cacho, Pepe; van Waterschoot, Toon; Moonen, Marc

    2010-01-01

    Strong acoustic resonances create long room impulse responses (RIRs) which may harm the speech transmission in an acoustic space and hence reduce speech intelligibility. Equalization is performed by cancelling the main acoustic resonances common to multiple room transfer functions (RTFs), i...

  12. Design Considerations for Abrasive Blast Rooms and Recovery Systems

    Science.gov (United States)

    2010-02-01

    COLUMN BOLT – ALLOWS FOR WIDER ENCLOSURES – STRONG ENOUGH TO SUPPORT MONORAIL Flange Bolt Room Column Bolt Room • Structural steel framework...OVERHEAD MONORAILS • EXTERIOR WORK STATIONS • TURNTABLES • HORIZONTAL ROTATION DEVICES OVERHEAD MONORAIL Workpiece Handling • Powered horizontal rotation

  13. The Patient Safety Attitudes among the Operating Room Personnel

    Directory of Open Access Journals (Sweden)

    Cherdsak Iramaneerat

    2016-07-01

    Full Text Available Background: The first step in cultivating the culture of safety in the operating room is the assessment of safety culture among operating room personnel. Objective: To assess the patient safety culture of operating room personnel at the Department of Surgery, Faculty of Medicine Siriraj Hospital, and compare attitudes among different groups of personnel, and compare them with the international standards. Methods: We conducted a cross-sectional survey of safety attitudes among 396 operating room personnel, using a short form of the Safety Attitudes Questionnaire (SAQ. The SAQ employed 30 items to assess safety culture in six dimensions: teamwork climate, safety climate, stress recognition, perception of hospital management, working conditions, and job satisfaction. The subscore of each dimension was calculated and converted to a scale score with a full score of 100, where higher scores indicated better safety attitudes. Results: The response rate was 66.4%. The overall safety culture score of the operating room personnel was 65.02, higher than an international average (61.80. Operating room personnel at Siriraj Hospital had safety attitudes in teamwork climate, safety climate, and stress recognition lower than the international average, but had safety attitudes in the perception of hospital management, working conditions, and job satisfaction higher than the international average. Conclusion: The safety culture attitudes of operating room personnel at the Department of Surgery, Siriraj Hospital were comparable to international standards. The safety dimensions that Siriraj Hospital operating room should try to improve were teamwork climate, safety climate, and stress recognition.

  14. Plane Stratified Flow in a Room Ventilated by Displacement Ventilation

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm; Nickel, J.; Baron, D. J. G.

    2004-01-01

    The air movement in the occupied zone of a room ventilated by displacement ventilation exists as a stratified flow along the floor. This flow can be radial or plane according to the number of wall-mounted diffusers and the room geometry. The paper addresses the situations where plane flow...

  15. Firearm Injuries Received in Emergency Room of a Nigerian ...

    African Journals Online (AJOL)

    2017-05-22

    May 22, 2017 ... the emergency room of Federal Teaching Hospital Abakaliki from January 2005 to. December 2014. Results: There were 214 ... Hospital: Analysis of Pattern, Morbidity, and Mortality. NI Omoke. Original Article ..... rapid evacuation of casualties to hospital emergency room. In this study, there was no ...

  16. 13 CFR 102.2 - Public reading rooms.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Public reading rooms. 102.2 Section 102.2 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION RECORD DISCLOSURE AND PRIVACY... described in paragraph (a) of this section are available in the SBA Online Reading Room at http://www.sba...

  17. The investigation of the design of hybrid operating room

    International Nuclear Information System (INIS)

    Jiang Weihao; Li Jun

    2011-01-01

    Objective: To investigate the design of the interventional operating room that can meet the needs of modern DSA operation, and the overall arrangement of the hybrid operating room should be reasonable, practical and perspective. Methods: The experience and understanding obtained from the designing and planning of the new Building of Radiology and Surgery in authors' hospital were summarized. In order to meet the requirements of aseptic surgical practices and a full-featured hybrid operating room the following factors should be carefully and synthetically taken into account: the room size, the functional sub-areas, the operational procedures, the aseptic specification, etc. Results: The sufficient verification and scientific design were the important link for building a hybrid operating room. It could provide the surgeons and interventional physicians with more alternative operating methods and it could represent the development trend of medical technology. Conclusion: When planning and designing a new DSA operating room, various factors related to the interventional procedures, such as the room size, the functional sub-areas, the operational procedures and the aseptic specification, should be carefully and synthetically taken into account. The standard of aseptic procedure must be strictly complied with and the various functional sub-areas need to be rationally distributed. The design of hybrid operating room, which joins the functions of both open surgery and interventional management together, should be scientific, practical and perspective. (authors)

  18. A remote control room at DIII-D

    International Nuclear Information System (INIS)

    Abla, G.; Schissel, D.P.; Penaflor, B.G.; Wallace, G.

    2008-01-01

    This paper describes a remote control room built at DIII-D to support remote participation activities of DIII-D research staff. In order to create a persistent, efficient, and reliable remote participation environment for DIII-D scientists, a remote control room has been built in a 640-ft 2 dedicated area. The purpose of this room is to experiment and define a remote control room framework that can facilitate the remote participation needs of current and future fusion experiments such as ITER. A variety of hardware equipment has been installed and several remote participation and collaboration technologies have been deployed. Objectivity and practical consideration has been the key while designing the room and deploying the technologies. Although, the DIII-D remote control room is still a work in progress and new software tools are being implemented, it has been already useful for a number of international remote participation activities. For example, it has been used for remote support of the EAST Tokamak in China during the start up operation and proven effective for other collaborative experiment activities. The description of the remote control room design is given along with technologies deployed for remote collaboration needs. We will also discuss our recent experiences involving the DIII-D remote control room as well as future plans for improvements

  19. Gerencia del cuidado-gerencia del servicio

    Directory of Open Access Journals (Sweden)

    Marta Palmet Jiménez

    2016-01-01

    Full Text Available La gerencia de este siglo debe estar plenamente identificada con la administración para planear, organizar, decidir y obtener resultados definidos, evaluados y alcanzados a través de las personas. Para poder gerenciar el cuidado se debe saber administrar. El objetivo de enfermería es cuidar; el objetivo de la gerencia es la conducción de la producción de bienes o servicios en las organizaciones. La gerencia del cuidado implica: motivación, creatividad, responsabilidad y ética por parte del cuidador y de quien cuida, claridad de actitud frente al ser y al qué hacer por parte del cuidador. Se puede concluir que la gerencia (administración, el cuidado (producto de calidad, el servicio (valor intangible, querer servir son un trinomio que deben ir de la mano de manera integrada para el logro de los objetivos propuestos por la organización de salud y de enfermería.

  20. Water in Room Temperature Ionic Liquids

    Science.gov (United States)

    Fayer, Michael

    2014-03-01

    Room temperature ionic liquids (or RTILs, salts with a melting point below 25 °C) have become a subject of intense study over the last several decades. Currently, RTIL application research includes synthesis, batteries, solar cells, crystallization, drug delivery, and optics. RTILs are often composed of an inorganic anion paired with an asymmetric organic cation which contains one or more pendant alkyl chains. The asymmetry of the cation frustrates crystallization, causing the salt's melting point to drop significantly. In general, RTILs are very hygroscopic, and therefore, it is of interest to examine the influence of water on RTIL structure and dynamics. In addition, in contrast to normal aqueous salt solutions, which crystallize at low water concentration, in an RTIL it is possible to examine isolated water molecules interacting with ions but not with other water molecules. Here, optical heterodyne-detected optical Kerr effect (OHD-OKE) measurements of orientational relaxation on a series of 1-alkyl-3-methylimidazolium tetrafluoroborate RTILs as a function of chain length and water concentration are presented. The addition of water to the longer alkyl chain RTILs causes the emergence of a long time bi-exponential orientational anisotropy decay. Such decays have not been seen previously in OHD-OKE experiments on any type of liquid and are analyzed here using a wobbling-in-a-cone model. The orientational relaxation is not hydrodynamic, with the slowest relaxation component becoming slower as the viscosity decreases for the longest chain, highest water content samples. The dynamics of isolated D2O molecules in 1-butyl-3-methylimidazolium hexafluorophosphate (BmImPF6) were examined using two dimensional infrared (2D IR) vibrational echo spectroscopy. Spectral diffusion and incoherent and coherent transfer of excitation between the symmetric and antisymmetric modes are examined. The coherent transfer experiments are used to address the nature of inhomogeneous

  1. LANGUAGE AWARENESS IN AN INTERNET CHAT ROOM

    Directory of Open Access Journals (Sweden)

    Leszek Szymański

    2013-10-01

    Full Text Available When communicating on the Internet, the participants, so to say, mingle two traditional modes of communication: writing and speech. The phenomenon appears to be most noticeable in chat room interactions. This suggestion is based on the fact that users try to behave as though they are engaged in a spoken act of communication, though the actual medium of communication employs written language forms. Therefore, Internet users need to know what conventions to employ and how to perform such actions in order to express the desired meanings, all with the aim of driving the interaction as close as possible to speech. Such implementations of certain language-related customs require a specific kind of language awareness from the users. This concept, plus the applied conventions, constitute the essence of this article. The discussion begins with an introduction to the research problem, in this case the intentional utilization by Internet chat participants of the graphic mode of communication in order to express their desired meanings. Second, the reader becomes acquainted with the terminology used in the paper, which includes: language awareness, (Internet chat, and (language corpus. Moreover, the source of the studied language material—a corpus of Internet chats—is presented. The said description additionally includes the informants’ characteristics, as well as the topicality of their conversations. The further sections of the paper discus the application of selected non-normative spelling conventions and word-formation processes, with the support of examples taken from the corpus. Based on the discussion, an attempt is made to indicate which features comprise certain values to the participants of Internet chats.

  2. Operating room fires: a closed claims analysis.

    Science.gov (United States)

    Mehta, Sonya P; Bhananker, Sanjay M; Posner, Karen L; Domino, Karen B

    2013-05-01

    To assess patterns of injury and liability associated with operating room (OR) fires, closed malpractice claims in the American Society of Anesthesiologists Closed Claims Database since 1985 were reviewed. All claims related to fires in the OR were compared with nonfire-related surgical anesthesia claims. An analysis of fire-related claims was performed to identify causative factors. There were 103 OR fire claims (1.9% of 5,297 surgical claims). Electrocautery was the ignition source in 90% of fire claims. OR fire claims more frequently involved older outpatients compared with other surgical anesthesia claims (P fire claims (P fires (n = 93) increased over time (P fires occurred during head, neck, or upper chest procedures (high-fire-risk procedures). Oxygen served as the oxidizer in 95% of electrocautery-induced OR fires (84% with open delivery system). Most electrocautery-induced fires (n = 75, 81%) occurred during monitored anesthesia care. Oxygen was administered via an open delivery system in all high-risk procedures during monitored anesthesia care. In contrast, alcohol-containing prep solutions and volatile compounds were present in only 15% of OR fires during monitored anesthesia care. Electrocautery-induced fires during monitored anesthesia care were the most common cause of OR fires claims. Recognition of the fire triad (oxidizer, fuel, and ignition source), particularly the critical role of supplemental oxygen by an open delivery system during use of the electrocautery, is crucial to prevent OR fires. Continuing education and communication among OR personnel along with fire prevention protocols in high-fire-risk procedures may reduce the occurrence of OR fires.

  3. Study of the effect of the NO{sub 2} in the atmospheric corrosion of copper; Estudio del efecto del NO{sub 2} en la corrosion atmosferica del cobre

    Energy Technology Data Exchange (ETDEWEB)

    Mariaca Rodriguez, Liboria

    1997-12-31

    simultanea de SO{sub 2}, a diferentes humedades relativas (HR) y temperaturas del aire atmosferico. Para ello se recurrio a la simulacion de las atmosferas de interes mediante camaras de laboratorio que permitiesen el control de la temperatura, HR y el nivel de contaminacion. En cada atmosfera se expusieron probetas de cobre completamente limpias, que se fueron retirando a los 7, 14, 21 y 28 dias. Se realizaron analisis gravimetricos de ganancia y perdida de masa y una completa caracterizacion de los productos de corrosion formados, principalmente mediante las tecnicas de difraccion de rayos X por angulo rasante (DRS), y espectroscopia fotoelectronica de rayos X (XPS o ESCA). Asimismo, se analizo la aplicabilidad en estas condiciones de las tecnicas electroquimicas de corriente continua (RP, CP y RE) y de corriente alterna (EIE). De los resultados obtenidos cabe senalar como mas importantes los siguientes: La corrosion del cobre en atmosferas contaminadas unicamente con NO{sub 2} depende fundamentalmente de la HR, no existiendo como en el caso de otros metales una HR critica (HRC), a partir de la cual aumenta la cinetica del proceso de corrosion; todo lo contrario, el cobre en este tipo de atmosferas se degrada mas a la menor de las HR ensayadas, 50%, siendo maxima la cinetica a la temperatura de 25 grados Celsius. La proporcion relativa de ambos gases en la mezcla se revela como otro factor de gran interes. Mientras en las atmosferas en que la concentracion de NO{sub 2} no supera la del SO{sub 2}, la mezcla provoca un efecto inhibidor en la corrosion del cobre, en aquellas otras en que la concentracion del NO{sub 2} supera notablemente y la del SO{sub 2} se observa un claro efecto sinergico, poniendose de nuevo de manifiesto los hechos apuntados en el apartado anterior. Las tecnicas instrumentales de ganancia y perdida de masa, complementadas con DRX (angulo rasante) y XPS, se han mostrado muy utiles para el seguimiento, en este tipo de atmosferas, del proceso de corrosion

  4. Measurement of low-frequency noise in rooms

    DEFF Research Database (Denmark)

    Pedersen, Steffen; Møller, Henrik; Persson-Waye, Kerstin

    2006-01-01

    Measurement of low-frequency noise in rooms is problematic due to standing wave patterns. The spatial variation in the sound pressure level can typically be as much as 20-30 dB. For assessment of annoyance from low-frequency noise in dwellings, it is important to measure a level close...... rooms. The sound pressure level was measured 1) in three-dimensional corners and 2) according to current Swedish and Danish measurement methods. Furthermore, the entire sound pressure distributions were measured by scanning. The Swedish and Danish measurement methods include a corner measurement...... to the highest level present in a room, rather than a room average level. In order to ensure representative noise measurements, different positions were investigated based on theoretical considerations and observations from numerical room simulations. In addition measurements were performed in three different...

  5. Fostering the practice of rooming-in in newborn care

    Directory of Open Access Journals (Sweden)

    Saurabh R. Shrivastava

    2013-09-01

    Full Text Available Practice of rooming-in meant that baby and mother stayed together in the same room day and night in the hospital, right from the time of delivery till the time of discharge. Adoption of rooming-in offers multiple benefits to the newborn, mother, and mother-child as a unit. It is a cost-effective approach wherefewer instruments are required and spares additional manpower. Rooming-in endeavors the opportunity to contribute signifi cantly in the child’s growth, development and survival by assisting in timely initiation of breastfeeding. To ensure universal application of rooming-in in hospitals, a comprehensive and technically sound strategy should be formulated and implemented with active participation of healthcare professionals. Measures such as advocating institutional delivery through outreach awareness activities; adoption of baby-friendly hospital initiative; inculcating a sense of ownership among health professionals, can be strategically enforced for better maternal and child health related outcomes.

  6. Using Data Communication to Give Ease in Hotel Room Services

    Directory of Open Access Journals (Sweden)

    Rudi Tjiptadi

    2011-06-01

    Full Text Available Gaining extra comfort in a trip is an important factor. Staying in a hotel needs food, laundry, and other activities that can make guests comfortable. The guesses’ requests are usually ordered to the Room Service. Sometimes problems occur in serving the guests’ requests due to human error, such as overdue orders, misunderstandings, etc. Computers are used to prevent those problems by typing requests directly from a computer in the room. The method is done by collecting data from the direct interview at a hotel related to guests’ requests, analyzing the current system, doing literature study, creating a Room Service system draft, as well as implementing the new system in a form of prototype. A Room Service system prototype is created with the abilities to order food, drinks, laundry and ironing. This prototype designed meets the guests’ satisfaction towards the hotel room services. 

  7. [Operating Room Nurses' Experiences of Securing for Patient Safety].

    Science.gov (United States)

    Park, Kwang Ok; Kim, Jong Kyung; Kim, Myoung Sook

    2015-10-01

    This study was done to evaluate the experience of securing patient safety in hospital operating rooms. Experiential data were collected from 15 operating room nurses through in-depth interviews. The main question was "Could you describe your experience with patient safety in the operating room?". Qualitative data from the field and transcribed notes were analyzed using Strauss and Corbin's grounded theory methodology. The core category of experience with patient safety in the operating room was 'trying to maintain principles of patient safety during high-risk surgical procedures'. The participants used two interactional strategies: 'attempt continuous improvement', 'immersion in operation with sharing issues of patient safety'. The results indicate that the important factors for ensuring the safety of patients in the operating room are manpower, education, and a system for patient safety. Successful and safe surgery requires communication, teamwork and recognition of the importance of patient safety by the surgical team.

  8. Overview of the LHD central control room data monitoring environment

    International Nuclear Information System (INIS)

    Emoto, M.; Yoshinuma, M.; Yoshida, M.; Nakanishi, H.; Iwata, C.; Ohsuna, M.; Nonomura, M.; Imazu, S.; Yokota, M.; Aoyagi, M.; Ogawa, H.; Ida, K.; Watanabe, K.; Kaneko, O.

    2016-01-01

    Highlights: • In this paper, the data monitoring environments in the LHD central control room, for example, summary data graph and video monitoring tools are introduced. Also, the environments for the remote participants are introduced. - Abstract: During the Large Helical Device (LHD) experiments, many scientists and technical staff are working in the central control room to operate the experiment. They must manage the diagnostics and controlling devices referring to the results of the last plasma shot. Also, the experiment coordinator must decide the conditions for the subsequent experiments using the results. Furthermore, many scientists are participating in the experiment from remote sites. Therefore, it is important to share the information in the control room quickly, such as the results of the last plasma discharge, with the remote user as well as with the staff in the room. In this paper, the data monitoring environment in the LHD central control room is introduced.

  9. Overview of the LHD central control room data monitoring environment

    Energy Technology Data Exchange (ETDEWEB)

    Emoto, M., E-mail: emoto.masahiko@nifs.ac.jp; Yoshinuma, M.; Yoshida, M.; Nakanishi, H.; Iwata, C.; Ohsuna, M.; Nonomura, M.; Imazu, S.; Yokota, M.; Aoyagi, M.; Ogawa, H.; Ida, K.; Watanabe, K.; Kaneko, O.

    2016-11-15

    Highlights: • In this paper, the data monitoring environments in the LHD central control room, for example, summary data graph and video monitoring tools are introduced. Also, the environments for the remote participants are introduced. - Abstract: During the Large Helical Device (LHD) experiments, many scientists and technical staff are working in the central control room to operate the experiment. They must manage the diagnostics and controlling devices referring to the results of the last plasma shot. Also, the experiment coordinator must decide the conditions for the subsequent experiments using the results. Furthermore, many scientists are participating in the experiment from remote sites. Therefore, it is important to share the information in the control room quickly, such as the results of the last plasma discharge, with the remote user as well as with the staff in the room. In this paper, the data monitoring environment in the LHD central control room is introduced.

  10. Experimental and numerical comparison of absorption optimization in small rooms

    DEFF Research Database (Denmark)

    Wincentz, Jakob Nygård; Garcia, Julian Martinez-Villalba; Jeong, Cheol-Ho

    2016-01-01

    A vast majority of modern music is recorded and produced in small control room environments of volumes of around 50 m3 . Several problems occur when controlling the room acoustics of such small spaces. First, the room modes will produce strong peaks and dips particularly at lower frequencies......, and even in the sweet spot position the listening experience can be easily deteriorated. Second, when designing or refurbishing small rooms it is hard to adequately predict the reverberation time by using Sabine’s formula due to highly non-diffuse conditions and using a statistical approach below......, boundary conditions, and phase information providing accuracy at low frequencies. Good agreements are found between measurements and simulations, confirming that FEM can be used as a design tool for optimizing absorption and acoustic parameters in small rooms...

  11. Analysis of room transfer function and reverberant signal statistics

    DEFF Research Database (Denmark)

    Georganti, Eleftheria; Mourjopoulos, John; Jacobsen, Finn

    2008-01-01

    For some time now, statistical analysis has been a valuable tool in analyzing room transfer functions (RTFs). This work examines existing statistical time-frequency models and techniques for RTF analysis (e.g., Schroeder's stochastic model and the standard deviation over frequency bands for the RTF...... magnitude and phase). RTF fractional octave smoothing, as with 1-slash 3 octave analysis, may lead to RTF simplifications that can be useful for several audio applications, like room compensation, room modeling, auralisation purposes. The aim of this work is to identify the relationship of optimal response...... and the corresponding ratio of the direct and reverberant signal. In addition, this work examines the statistical quantities for speech and audio signals prior to their reproduction within rooms and when recorded in rooms. Histograms and other statistical distributions are used to compare RTF minima of typical...

  12. Determinantes del ingreso y del gasto corriente de los hogares

    OpenAIRE

    Muñoz C., Manuel

    2004-01-01

    Este ensayo de investigación empírica analiza los determinantes del ingreso y del gasto en los hogares colombianos. Utilizando un modelo del ciclo de vida con datos de la encuesta de hogares de 1994 y 1995, muestra que el comportamiento del ingreso está afectado principalmente por las características demográficas del hogar y los rasgos socio ocupacionales de sus miembros. El comportamiento del gasto está determinado ante todo por el ingreso y, en menor medida, por las características sociales...

  13. Las fluctuaciones del nivel del mar durante el Cuaternario

    OpenAIRE

    Pousa, Jorge Lorenzo; Isla, Federico Ignacio; Schnack, Enrique Jorge

    2002-01-01

    Los cambios del nivel del mar han ejercido una fuerte influencia en la evolución del planeta y en la historia de la humanidad. En una escala de tiempo geológico, las variaciones de los niveles oceánicos han dejado un registro ampliamente distribuido en la forma de depósitos sedimentarios. El descenso del nivel del mar durante la Ultima Glaciación, que alcanzó unos 120 metros hace 18.000 años, permitió la emergencia del estrecho de Bering y la migración humana desde Eurasia hacia América. Se e...

  14. Hospital Patient Room Design: The Issues Facing 23 Occupational Groups Who Work in Medical/Surgical Patient Rooms.

    Science.gov (United States)

    Lavender, Steven A; Sommerich, Carolyn M; Patterson, Emily S; Sanders, Elizabeth B-N; Evans, Kevin D; Park, Sanghyun; Umar, Radin Zaid Radin; Li, Jing

    2015-01-01

    The aim of this study was to learn from a wide range of hospital staff members about how the design of the patient room in which they work adversely affects their ergonomics or hinders their job performance. In addition to providing a healing space for patients, hospital patient rooms need to serve as functional workplaces for the people who provide clinical care, to clean, or to maintain room functions. Therefore, from a design perspective, it is important to understand the needs of all the users of hospital patient rooms with regard to room design. One hundred forty-seven people, representing 23 different occupational stakeholder groups, participated in either focus groups or interviews in which they were asked to identify room design issues that affect the performance of their work tasks. Key issues shared across multiple stakeholder groups included an inability to have eye contact with the patient when entering the room, inadequate space around the bed for the equipment used by stakeholders, the physical demands experienced as stakeholders move furnishings to accomplish their activities or access equipment, and a lack of available horizontal surfaces. Unique issues were also identified for a number of stakeholder groups. There are a number of issues that should be addressed in the next generation of hospital patient rooms, or when refurbishing existing facilities, so that all occupational stakeholder groups can work effectively, efficiently, and without undue physical stress. © The Author(s) 2015.

  15. La imagen del pase.

    Directory of Open Access Journals (Sweden)

    Hernando Bernal.

    1999-11-01

    Full Text Available A partir de un texto del poeta Octavio Paz llamado «La imagen», se busca proseguir la equivalencia entre las imágenes de la poesía y la función que ellas tienen para el poeta, y el fantasma fundamental y su función para el analizante que está en el momento del pase. Se parte de la idea de que la poesía busca entrar en el ser así como el psicoanálisis tiene como finalidad apuntar al corazón del ser del sujeto. Se hace entonces una distinción del concepto de «ser» para el psicoanálisis, haciendo alusión también al discurso de la filosofía. Esclarecido el sentido de lo que es el «ser» para el psicoanálisis, se aborda de lleno – entre otras cosas, relacionadas con la experiencia del pase específicamente- la equivalencia entre la definición que hace Octavio Paz de «La Imagen» y el momento del pase en el análisis de un sujeto, imagen que, al igual que el mito para la filosofía, las leyes para la ciencia y el matema para el psicoanálisis, se constituyen en los instrumentos con los que cada una de estas disciplinas horadan en lo real.

  16. Aspectos epidemiológicos del síndrome de Burnout en personal sanitario

    OpenAIRE

    Atance Martínez Juan Carlos

    1997-01-01

    FUNDAMENTOS: El Síndrome Burnout se invoca como probable responsable de la desmotivación que sufren los profesionales sanitarios actualmente. Esto sugiere la posibilidad de que este síndrome esté implicado en las elevadas tasas de absentismo laboral que presentan estos profesionales. El estudio pretende aportar una serie de caracterizaciones de las variables epidemiológicas universales que permitan una aproximación al perfil de riesgo en esta profesión. MÉTODO: Estudiamos una muestra de 294 p...

  17. del Estado Aragua

    Directory of Open Access Journals (Sweden)

    Joselys Cintia Zerpa

    2008-01-01

    Full Text Available Diagnostica la situación actual de los bienes que conforman al patrimonio histórico-cultural del Municipio Zamora, Estado Aragua, Venezuela. La Investigación es descriptiva y de campo, comprendió la elaboración de un inventario de los bienes inmuebles, festividades religiosas y manifestaciones artesanales del municipio. Se estudiaron la condición física y uso actual de estos bienes y los planes y proyectos existentes. Analizó el marco normativo que los rige. Se obtuvo la opinión de los representantes de organismos públicos relacionados con la actividad turística del Municipio, de los visitantes, cronistas e historiadores. Aportes: La mayoría de los bienes se encuentran en buen estado de conservación, Las manifestaciones culturales, festividades y la artesanía se desarrollan periódicamente pero no son aprovechadas turísticamente, Se determinó que existe un marco normativo para tales bienes y No existen propuestas actuales referentes a estos bienes. Se reflejó el interés de los sectores institucional y privado para la incorporación de estos bienes a la oferta turística del Municipio y del Estado

  18. APOSTILLAS ACERCA DEL POSTRABAJO

    Directory of Open Access Journals (Sweden)

    Arturo Torrecilla

    2000-01-01

    Full Text Available El más reciente debate en torno al postrabajo transforma la herencia de los dos ciclos que le precedieron desde los años setenta. El primero se correspondía con la crítica de la división social y técnica de labores informada por una filosofía de la alienación o bien por una rectificación de la arquitectónica marxista pero salvaguardando la promesa laborista del buen trabajo. El segundo ciclo hacía eco del rechazo a las cadenas de montaje fordistas y se abría al horizonte de la abolición del trabajo salarial, manteniendo sin embargo el abolengo del sujeto unitario de la historia. La presente escena asume una densidad mayor, producto del encuentro entre las nuevas tecnologías informacionales, las discusiones en el ámbito de la sociología y la antropología, de la tecnología y la ciencia, junto al dueto que inaugura el posmodernismo.

  19. Apostillas acerca del postrabajo

    Directory of Open Access Journals (Sweden)

    Arturo Torrecilla

    2000-04-01

    Full Text Available El más reciente debate en torno al postrabajo transforma la herencia de los dos ciclos que le precedieron desde los años setenta. El primero se correspondía con la crítica de la división social y técnica de labores informada por una filosofía de la alienación o bien por una rectificación de la arquitectónica marxista pero salvaguardando la promesa laborista del buen trabajo. El segundo ciclo hacía eco del rechazo a las cadenas de montaje fordistas y se abría al horizonte de la abolición del trabajo salarial, manteniendo sin embargo el abolengo del sujeto unitario de la historia. La presente escena asume una densidad mayor, producto del encuentro entre las nuevas tecnologías informacionales, las discusiones en el ámbito de la sociología y la antropología, de la tecnología y la ciencia, junto al dueto que inaugura el posmodernismo.

  20. La universidad del futuro

    Directory of Open Access Journals (Sweden)

    FERNANDO SANCÉN CONTRERAS

    2013-01-01

    Full Text Available El trabajo señala la necesidad de reconstruir la Universidad, dado el dinamismo que muestra la ciencia y la sociedad, pues trae consigo cambios sustanciales en la visión del mundo y en el aumento del poder del hombre sobre la naturaleza. Se analizan los supuestos epistemológicos de la universidad tradicional y se propone una nueva explicación del conocimiento humano, enfatizando el conocimiento científico. Postula una docencia fundada en las propiedades de la ciencia, cuyo método inductivo basado en los paradigmas vigentes: analítico, crítico, pragmático, ofrece una herramienta para la docencia, la investigación y la difusión de la cultura. Se propone una educación centrada en el sujeto que se hace a sí mismo (etopoiética y que insiste en el proceso de auto-creación del individuo y de la sociedad.