WorldWideScience

Sample records for roman ionikan jt

  1. Pronkssõduri teisaldamise ainsaks eelduseks on referendum / Kalev Rebane, Roman Zharov, Aleksandr Korobov...[jt.] ; interv. Peeter Ernits, Jüri Aarma, Annika Poldre

    Index Scriptorium Estoniae

    2006-01-01

    Oma seisukohtadest Tallinnas Tõnismäel asuva Teise maailmasõja mälestusmärgi suhtes räägivad isamaaliitlane Kalev Rebane ja vene noorteühenduse Notshnoi Dozor juhid Roman Zharov, Aleksandr Korobov, Oleg Filippov ja Igor Rogo

  2. Roman Chamomile

    Science.gov (United States)

    ... eczema, frostbite, diaper rash, bedsores (decubitus ulcers), and hemorrhoids. Roman chamomile is sometimes mixed with other herbs ... gums. Liver and gallbladder problems. Frostbite. Diaper rash. Hemorrhoids. Other conditions. More evidence is needed to rate ...

  3. JT Bachman Leadership Framework

    Science.gov (United States)

    2017-07-01

    DAHLGREN DIVISION NAVAL SURFACE WARFARE CENTER Dahlgren, Virginia 22448-5100 NSWCDD/MP-17/300 JT BACHMAN LEADERSHIP FRAMEWORK...REPORT TYPE Miscellaneous Publication 3. DATES COVERED (From - To) 27 Sept 2016 – 08 June 2017 4. TITLE AND SUBTITLE JT BACHMAN LEADERSHIP FRAMEWORK...distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT This document describes the leadership framework of a civil servant following

  4. Report on the design of JT-4

    International Nuclear Information System (INIS)

    Kitsunezaki, Akio; Seki, Shogo; Yokomizo, Hideaki; Matsuda, Toshiaki; Saito, Ryuta

    1978-08-01

    The present status of design of JT-4 tokamak is described. The objectives of JT-4 are shown graphically and the main parameters are tabulated. JT-4 is a tokamak of non-circular (ellipse or D-shape) plasma cross section with axisymmetric divertors at top and bottom of the plasma column. The principal purpose of JT-4 is to obtain high plasma beta values, desirably exceeding 5%, by strong secondary plasma heating and by impurities elimination. The experimental results obtained with JT-4 are essential in the design of future tokamaks and tokamak reactors with high efficiency and at reasonable cost. (author)

  5. Development of JT-60 diagnostics system

    International Nuclear Information System (INIS)

    Suzuki, Yasuo

    1988-01-01

    The various kinds of plasma diagnostics have been developed and utilized in the JT-60 experiments. The features of JT-60 diagnostics system and the historical proceeding of the development are described in this paper. Taking account of the design consideration, JT-60 diagnostics system is sorted out into eight groups, which include six diagnostics systems, the data processing system and diagnostics supporting system. The all devices in the JT-60 diagnostics system were instrumented on schedule in the end of the fiscal year of 1985 and have contributed to JT-60 experiments. (author)

  6. Roman Lyariev, About Knives

    OpenAIRE

    Gedeeva, Darina; Ubushieva, Bamba; Babaev, Andrei

    2016-01-01

    Roman demonstrates and explains some of his hunting knives, including: -a knife made of a soft metal, -a foldable knife made of a hard metal and with a wooden handle, -a small foldable knife used for skinning animals, -a Swiss-style knife with a screwdriver, etc. He also shows diamond knife sharpeners and lanyards which are useful during hunting to dry clothes or to set up a tent. Most of these items have been given to Roman by his friends and relatives as presents. Arcadia

  7. Greco-Roman Astrology

    Science.gov (United States)

    Beck, Roger

    Astrology was entrenched in the culture of the Roman Empire. The system and its influence is described as well as its relationship to mathematical astronomy at the time. The material remains are of two sorts: papyrus horoscopes and coins with astrological motifs.

  8. Greek and Roman Myths.

    Science.gov (United States)

    Carr, Fredella; Faggionato, Michael

    Designed for use with the text "Greek and Roman Myths," this junior high school learning activity packet introduces students to mythology and examines the influence of myths on contemporary culture. Over 20 exercises, tagged to specific readings in the text, cover identification of the major gods, the Prometheus myth, the Atlas myth,…

  9. Greek & Roman Mythology.

    Science.gov (United States)

    Bigelow, Alma

    Activities and background information on Greek and Roman mythology are presented. The unit is designed for eighth graders, but many of the activities can be modified for other grade levels. The unit includes: (1) a content outline; (2) a list of instructional materials including suggested textbooks, teacher-prepared materials, and resource…

  10. Der Dichter Roman Svendborg

    DEFF Research Database (Denmark)

    Schweppenhäuser, Jakob

    2016-01-01

    Roman Svendborg? Mein Großvater, Hermann Schweppenhäuser, schenkte mir vor einigen Jahren einmal einen Gedichtband, dessen Verfasser mir bis lang noch nicht bekannt war. Damals noch ein junger dänischer Student der Skandinavistik waren mir schließlich nicht alle deutschsprachigen Dichter geläufig...

  11. Discharge optimization in JT-60

    International Nuclear Information System (INIS)

    Ninomiya, H.; Hosogane, N.; Kikuchi, M.; Yoshino, R.; Seki, S.; Kurihara, K.; Kimura, T.; Shimada, R.; Matsukawa, M.

    1986-01-01

    For the optimization of the feedback control gains of the plasma control system in JT-60, the plasma modelling by the regression analysis, the matrix transfer function analysis and the simulation study are performed. The experimental results of plasma control are well consistent with these estimations and the usefulness of a modelling by the regression analysis, the matrix transfer function analysis and the simulation study is experimentally confirmed. It is also shown that the regression analysis is useful for development of the sensor algorithm of plasma shape and location of separatrix line in a feedback control system. Some topics are also presented about plasma engineering obtained in JT-60: possibility to suppress the uncontrollability of plasma density, αI/sub p/ control for plasma position and volt-sec consumption

  12. Construction and testing of JT-60

    International Nuclear Information System (INIS)

    Kishimoto, H.; Aikawa, H.; Oikawa, A.; Miya, N.; Suzuki, K.; Ozeki, T.; Tokutake, T.; Kunieda, S.; Hiruta, K.; Hosoda, R.

    1987-01-01

    The JT-60 project is reviewed in terms of design, R and D, construction, commissioning and project management. Design features of JT-60 have been refined and renewed through periodic assessments. Engineering targets have been achieved by R and D efforts. Construction and commissioning have progressed on schedule with intensive project management and control. JT-60 obtained high performance and has entered into the experimental phase after completion of machine construction. (orig.)

  13. Baking technique of JT-60

    Energy Technology Data Exchange (ETDEWEB)

    Arai, Takashi; Masaki, Kei; Miyachi, Kengo [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    1998-10-01

    It needs to make low ultimate pressure to decrease impurities in a plasma in a nuclear fusion device. Baking technique is very effective method to decrease outgassing rate from first walls and inner surface of the vacuum vessel. However, in such large vacuum vessel, e.g. JT-60, the non-uniform heating and the deformation due to thermal expansion might be very important problems. The baking technique of JT-60 is described. Two baking systems were applied to JT-60 to solve the problem of non-uniform heating. One is a circulation system of the hot nitrogen gas which is located between the inner and outer skins of the double-skin structured vacuum vessel. The other is an electric heater which apply the thick of the vessel. In order to prevent the deformation, the difference of temperature was as small as possible. By both the baking at 300degC and the conditioning such as discharge cleaning, the ultimate pressure was achieved 7.9x10{sup -7} Pa. (author)

  14. Baking technique of JT-60

    International Nuclear Information System (INIS)

    Arai, Takashi; Masaki, Kei; Miyachi, Kengo

    1998-01-01

    It needs to make low ultimate pressure to decrease impurities in a plasma in a nuclear fusion device. Baking technique is very effective method to decrease outgassing rate from first walls and inner surface of the vacuum vessel. However, in such large vacuum vessel, e.g. JT-60, the non-uniform heating and the deformation due to thermal expansion might be very important problems. The baking technique of JT-60 is described. Two baking systems were applied to JT-60 to solve the problem of non-uniform heating. One is a circulation system of the hot nitrogen gas which is located between the inner and outer skins of the double-skin structured vacuum vessel. The other is an electric heater which apply the thick of the vessel. In order to prevent the deformation, the difference of temperature was as small as possible. By both the baking at 300degC and the conditioning such as discharge cleaning, the ultimate pressure was achieved 7.9x10 -7 Pa. (author)

  15. Heating experiments of JT-60

    International Nuclear Information System (INIS)

    1987-01-01

    In JT-60, after the finish of the first stage Joule experiment, the heating facilities were installed, and the heating experiment was started in August, 1986. As to neutral beam injection, the beam injection experiment at the maximum rating 20 MW carried out, and also as to RF, the injection experiment up to 1.4 MW was carried out in both ion cyclotron and low band hybrid waves. The results worthy of special mention in the heating experiment were the success in the current drive up to 1.7 MA at maximum using low band hybrid waves and the improvement of plasma confinement characteristics obtained by the compound heating of NBI and RF. In this paper, the main results of these heating experiments and their significance are explained. The JT-60 is the testing facilities for attaining the critical plasma condition by additionally heating the plasma which is generated by Joule electric discharge with NBI and RF heatings. The experimental operation cycle of the JT-60 consists of the unit cycle of two weeks, and the number of days in operation is nine days. The temperature of heated plasma rose to 70 million deg C in the 20 MW NBI heating. Hereafter, the improvement of confinement time by increasing the stored energy of plasma is attempted. (Kako, I.)

  16. Density limit in JT-60

    International Nuclear Information System (INIS)

    Kamada, Yutaka; Hosogane, Nobuyuki; Hirayama, Toshio; Tsunematsu, Toshihide

    1990-05-01

    This report studies mainly the density limit for a series of gas- and pellet-fuelled limiter discharges in JT-60. With the pellet injection into high-current/low-q (q(a)=2.3∼2.5) discharges, the Murakami factor reaches up to 10∼13 x 10 19 m -2 T -1 . The values are about factors of 1.5∼2.0 higher than those for usual gas-fuelled discharges. The pellet injected discharges have high central density, whereas the electron density in the outer region (a/2 abs and n e 2 (r=50 cm) x Z eff (r=50 cm). (author)

  17. JT-60 database system, 1

    International Nuclear Information System (INIS)

    Kurihara, Kenichi; Kimura, Toyoaki; Itoh, Yasuhiro.

    1987-07-01

    Naturally, sufficient software circumstance makes it possible to analyse the discharge result data effectively. JT-60 discharge result data, collected by the supervisor, are transferred to the general purpose computer through the new linkage channel, and are converted to ''database''. Datafile in the database was designed to be surrounded by various interfaces. This structure is able to preserve the datafile reliability and does not expect the user's information about the datafile structure. In addition, the support system for graphic processing was developed so that the user may easily obtain the figures with some calculations. This paper reports on the basic concept and system design. (author)

  18. Greco-Roman Stone Disease

    Science.gov (United States)

    Moran, Michael E.; Ruzhansky, Katherine

    2008-09-01

    Greek and Roman thought had a profound influence upon Western medical practice. From the fall of the Greek civilization to the fall of the Roman, remarkable progress of our understanding of human anatomy and physiology occurred. Here we review the attempts of Greek and Roman thinkers to develop the first understanding of the pathophysiology of urolithiasis, its epidemiology, differential diagnosis of renal versus bladder stones, medications for both colic and prevention, the role of familial syndromes, and dietary management.

  19. Three Roman Innkeepers

    OpenAIRE

    Tatarin, Milovan

    2009-01-01

    In the critical publication of Dundo Maroje which in 1930 was edited for the seventh book of the edition Stari pisci hrvatski (Old Croatian writers) by Milan Rešetar, »three Roman innkeepers« are named as dramatis personae. They appear on the stage three times: act one, scene one; act two, scene nine; act four, scene nine. The aim of this work is to establish how many inns and how many innkeepers appear in the comedy and are their lines mixed.

  20. Greek and roman calendars

    CERN Document Server

    Hannah, Robert

    2005-01-01

    The smooth functioning of an ordered society depends on the possession of a means of regularising its activities over time. That means is a calendar, and its regularity is a function of how well it models the more or less regular movements of the celestial bodies - of the moon, the sun or the stars. Greek and Roman Calendars examines the ancient calendar as just such a time-piece, whose elements are readily described in astronomical and mathematical terms. The story of these calendars is one of a continuous struggle to maintain a correspondence with the regularity of the seasons and the sun, d

  1. The Roman Bazaar

    DEFF Research Database (Denmark)

    Bang, Peter Fibiger

    The Roman bazaar et et komparativt studie af handels og markedsforhold i Romerriget. Det er bogens tese, at vi bedre forstår den økonomiske udvikling i Romerriget hvis vi skifter vores sammenligningsgrundlag fra den tidligt moderne, europæiske kapitalisme til store agrare eller tributære imperier......, som fx Mogulernes rige i Indien. Hovedemner er den imperiale mobilisering af den agrare produktion og markedernes ofte fragmenterede karakter. Det sidste punkt understøttes vha. Clifford Geertz' analyse af Bazaar-markeder....

  2. JT-60 database system, 2

    International Nuclear Information System (INIS)

    Itoh, Yasuhiro; Kurihara, Kenichi; Kimura, Toyoaki.

    1987-07-01

    The JT-60 central control system, ''ZENKEI'' collects the control and instrumentation data relevant to discharge and device status data for plant monitoring. The former of the engineering data amounts to about 3 Mbytes per shot of discharge. The ''ZENKEI'' control system which consists of seven minicomputers for on-line real-time control has little performance of handling such a large amount of data for physical and engineering analysis. In order to solve this problem, it was planned to establish the experimental database on the Front-end Processor (FEP) of general purpose large computer in JAERI Computer Center. The database management system (DBMS), therefore, has been developed for creating the database during the shot interval. The engineering data are shipped up from ''ZENKEI'' to FEP through the dedicated communication line after the shot. The hierarchical data model has been adopted in this database, which consists of the data files with tree structure of three keys of system, discharge type and shot number. The JT-60 DBMS provides the data handling packages of subroutines for interfacing the database with user's application programs. The subroutine packages for supporting graphic processing and the function of access control for security of the database are also prepared in this DBMS. (author)

  3. Control of divertor configuration in JT-60

    International Nuclear Information System (INIS)

    Yoshino, R.; Kukuchi, M.; Ninomiya, H.; Yoshida, H.; Tsuji, S.; Hosogane, N.; Seki, S.

    1985-01-01

    The control algorithm of JT-60 divertor configuration is presented. JT-60 has five types of poloidal magnetic field coil with each power supply in order to regulate the control objectives mentioned above. However, if one controls each objective by each coil current independently, there must inevitably occur large interaction between control objectives. Because the relation between control objectives and coil currents is complicated. This situation may be the same with a fusion reactor device. For making it possible to control each objective independently without causing large interaction, the authors adopt the noninteracting control algorithm. Hence, this report demonstrates the availability of this method to the control of JT-60 divertor configuration

  4. Ritual failure in Romans 6

    African Journals Online (AJOL)

    2016-08-05

    Aug 5, 2016 ... ISSN: (Online) 2072-8050, (Print) 0259-9422. Page 1 of ... understanding of Romans 6:1–14,2 where Paul develops his argument from an initial thesis statement ..... See Yarbro Collins (1989:42): 'Romans 6:1–14 the ritual of baptism is explicitly ..... his gospel of grace as antinomianism (Ferguson 2009:156;.

  5. JT-60 plasma control system

    International Nuclear Information System (INIS)

    Kurihara, K.

    1988-01-01

    JT-60 plasma control can be performed by the supervisory controller, the measurement system and actuators such as the poloidal field coil power supplies, gas injectors, neutral beam injection (NBI) heating system and radio frequency (RF) heating system. One of the most important characteristics of this system is a perfect digital control one composed of mini-computers, fast array processors and CAMAC modules, and it has large flexibility and few troubles to adjust the system. This system started to be operated in April 1985, after the six-year-long design, construction and testing, and have been operated and improved many times for two years. In this paper, the final system specification and its performance are presented aiming at the technological aspect of hardware and software. In addition, and experienced troubles are also presented. (author)

  6. JT-60SA power supply system

    International Nuclear Information System (INIS)

    Coletti, A.; Baulaigue, O.; Cara, P.; Coletti, R.; Ferro, A.; Gaio, E.; Matsukawa, M.; Novello, L.; Santinelli, M.; Shimada, K.; Starace, F.; Terakado, T.; Yamauchi, K.

    2011-01-01

    The paper describes the main features of the Superconducting Magnets Power Supply to generate the toroidal and poloidal magnetic fields in JT-60SA tokamak, with special regard to coil current regulation mode and magnets protection.

  7. Roman iron axes manufacturing technology

    International Nuclear Information System (INIS)

    Barrena, M.I.; Gomez de Salazar, J.M.; Soria, A.

    2008-01-01

    The results of metallographic, chemical and mechanical analysis of two Roman axes are presented. Insights into the technologies used by the Romans are considered. These axes were buried in a Roman village in La Olmeda, Palencia, Spain, which was built around the first century BC and it was later abandoned and destroyed in the fifth century AD. It has been observed that some artefacts, specifically axes show that the technology existed to increase hardness by solid-state welding of sheet steel of different carbon contents

  8. Progress in JT-60 innovative technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-09-01

    This review report provides the synthetic archives of innovative technologies in 20-year facility developments for the large tokamak experimental device JT-60, first founded as the major magnetic fusion device in the Second Basic Program for Fusion Research and Development of Japan. Manufacture of JT-60 was started in 1978, and the first plasma was achieved on April 8, 1985. In 1989-1991, the vacuum vessel and poloidal field coils were entirely reconfigured to improve the plasma performance. The major original mission of the JT-60 project, a breakeven condition for a D-T equivalent plasma, was finally attained in 1996. After this, JT-60, as a leading device for magnetic fusion research in the world, continues to challenge many experimental issues, which has been achieved by collaboration of innovative facility developments and experimental improvements. In addition, at this time to start the ITER construction phase in 2005, this review is expected to contribute the construction and operation activities for the next generation tokamak by providing the basic ideas in facility developments. We classified a tremendous number of development items into the selected sections for this review. Since the authors have been in charge of each development activity of their own, the contents are full of essential stories, points, and keywords in spite of its compact handbook size. We believe this review could provide highly sophisticated, informative ideas matured in JT-60 technological developments. (author)

  9. Research and development of JT-60 tokamak

    International Nuclear Information System (INIS)

    Saito, Ryusei; Sato, Hiroshi; Murata, Toshifumi; Ito, Yoshiyasu.

    1978-01-01

    The development of nuclear fusion apparatuses for the purpose of utilizing energy due to nuclear fusion reaction has been forwarded in various countries, and in Japan, the critical plasma testing apparatus JT-60 is about to be constructed, centering around Japan Atomic Energy Research Institute. This is one of four large apparatuses to be constructed in the world, and it is expected to be completed in 1982. JT-60 is a nuclear fusion apparatus of tokamak type aiming at generating critical plasma. The features of JT-60 are the formation of the plasma with small aspect ratio, the equipment of a magnetic limiter, the arrangement of the first wall of molybdenum and high temperature baking as the measures to impurities. The large toroidal magnetic field coil of JT-60 is composed of 18 unit coils. The analyses of magnetic field, thermal behavior and structural strength, the selection of materials, and the development of manufacturing techniques regarding the toroidal coil are described. The vacuum container of JT-60 is composed of the main body of torus type comprising thickwalled rings and bellows, the first wall comprising liners, fixed limiter and magnetic limiter, and observation ports. It is large torus-form container with non-circular cross section, and baking at 500 deg. C is required as the measure to ultrahigh vacuum. Complex forces including electromagnetic force act on it. (Kako, I.)

  10. Assembly study for JT-60SA tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Shibanuma, K., E-mail: shibanuma.kiyoshi@jaea.go.jp [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Arai, T.; Hasegawa, K.; Hoshi, R.; Kamiya, K.; Kawashima, H.; Kubo, H.; Masaki, K.; Saeki, H.; Sakurai, S.; Sakata, S.; Sakasai, A.; Sawai, H.; Shibama, Y.K.; Tsuchiya, K.; Tsukao, N.; Yagyu, J.; Yoshida, K.; Kamada, Y. [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Mizumaki, S. [Toshiba Corporation, Minato-ku, Tokyo 105-8001 (Japan); and others

    2013-10-15

    The assembly scenarios and assembly tools of the major tokamak components for JT-60SA are studied in the following. (1) The assembly frame (with a dedicated 30-tonne crane), which is located around the JT-60SA tokamak, is adopted for effective assembly works in the torus hall and the temporary support of the components during assembly. (2) Metrology for precise positioning of the components is also studied by defining the metrology points on the components. (3) The sector segmentation for weld joints and positioning of the vacuum vessel (VV), the assembly scenario and tools for VV thermal shield (TS), the connection of the outer intercoil structure (OIS) and the installation of the final toroidal field coil (TFC) are studied, as typical examples of the assembly scenarios and tools for JT-60SA.

  11. Data management facility for JT-60

    International Nuclear Information System (INIS)

    Ohasa, K.; Kurimoto, K.; Mochizuki, O.

    1983-01-01

    This study considers the Data Management Facility which is provided for unified management of various diagnostics data with JT-60 experiments. This facility is designed for the purpose of data access. There are about 30 kinds of diagnostic devices that are classified by diagnostic objects equipped for JT-60 facility. It gathers the diagnostic date about 10 Mega Byte per each discharge. Those diagnostic data are varied qualitatively and quantitatively by experimental purpose. Other fundamental information like discharge condition, adjustive value for diagnostic devices is required to process those gathered data

  12. Disassembly of JT-60 tokamak device and ancillary facilities for JT-60 tokamak

    International Nuclear Information System (INIS)

    Okano, Fuminori; Ichige, Hisashi; Miyo, Yasuhiko; Kaminaga, Atsushi; Sasajima, Tadayuki; Nishiyama, Tomokazu; Yagyu, Jun-ichi; Ishige, Youichi; Suzuki, Hiroaki; Komuro, Kenichi; Sakasai, Akira; Ikeda, Yoshitaka

    2014-03-01

    The disassembly of JT-60 tokamak device and its peripheral equipments, where the total weight was about 5400 tons, started in 2009 and accomplished in October 2012. This disassembly was required process for JT-60SA project, which is the Satellite Tokamak project under Japan-EU international corroboration to modify the JT-60 to the superconducting tokamak. This work was the first experience of disassembling a large radioactive fusion device based on Radiation Hazard Prevention Act in Japan. The cutting was one of the main problems in this disassembly, such as to cut the welded parts together with toroidal field coils, and to cut the vacuum vessel into two. After solving these problems, the disassembly completed without disaster and accident. This report presents the outline of the JT-60 disassembly, especially tokamak device and ancillary facilities for tokamak device. (author)

  13. Biopolitics rudiments in Roman Law

    Directory of Open Access Journals (Sweden)

    Miguel Régio de Almeida

    2014-12-01

    Full Text Available This article proposes a jurisprudential and philosophical reflection on Biopolitics in Roman Law, based on juridical figures such as sacred men, aliens, slaves and iustitium. Working at the edge of roman society, they represent a relation of inclusion or tolerance in a World centred on its citizens, which led to a state of exception or to integration modes of this marginality. Lessons for the present time can still be learned from this dynamic, when a new ius commune is proposed.http://dx.doi.org/10.14195/2183-1718_66_11

  14. Celtiberian metrology and its romanization

    Directory of Open Access Journals (Sweden)

    Leonard A. CURCHIN

    2013-05-01

    Full Text Available Celtiberian metrology has scarcely been investigated until now, with the exception of coin weights. On the basis of measurements of pre-Roman mud bricks, a Celtiberian foot of 24 cm is proposed. With regard to weights, we can accept a module of 9 g for silver jewelry and some bronze coins; however, loom weights do not conform to any metrological system. Over time, Roman measures of length (as indicated by the dimensions of bricks, tiles and architectural monuments and weight were adopted.

  15. Physical design of JT-60 Super Upgrade

    International Nuclear Information System (INIS)

    Nagashima, K.; Kikuchi, M.; Kurita, G.; Ozeki, T.; Aoyagi, T.; Ushigusa, K.; Neyatani, Y.; Kubo, T.; Mori, K.; Nakagawa, S.; Kuriyama, M.; Nagami, M.

    1997-01-01

    The JT-60 Super Upgrade (JT-60SU) is an upgraded tokamak device of JT-60U for developing the steady-state reactor and advanced tokamak operation in the International Thermonuclear Experimental Reactor. The device is planned to utilize the JT-60 facilities fully and to minimize the needed modification. The major radius is 4.8 m and the maximum plasma current is 10 MA. Neutral beam injection with 750 keV beam energy is the primary heating method. The machine is capable of steady-state operation with high density up to 8.8 x 10 19 m -3 at 5 MA plasma current. The high operating density, over the Greenwald et al. limit, is critically important in order to achieve high bootstrap current fraction. Ballooning mode and low n ideal magnetohydrodynamic (MHD) mode including the bootstrap current were analyzed for steady-state operation. The current profile must be optimized to obtain a normalized beta up to 3. The plasma configuration with high triangularity was adopted in order to get good MHD stability and high energy confinement. A compact divertor was designed in order to get the large plasma space. (orig.)

  16. Pneumatic pellet injector for JT-60

    International Nuclear Information System (INIS)

    Onozuka, Masanori; Hiratsuka, Hajime; Kawasaki, Kouzo.

    1990-01-01

    The pneumatic 4-shot pellet injector has been installed and operated for JT-60 (JAERI Tokamak-60). The performance tests have proven that the device provides high speed pellets as planned. The maximum pellet velocity obtained in the hydrogen pellet tests is greater than 2.3km/s at 100 bar propellant gas. (author)

  17. Pneumatic pellet injector for JT-60

    Energy Technology Data Exchange (ETDEWEB)

    Onozuka, Masanori (Mitsubishi Heavy Industries Ltd., Tokyo (Japan)); Hiratsuka, Hajime; Kawasaki, Kouzo

    1990-11-01

    The pneumatic 4-shot pellet injector has been installed and operated for JT-60 (JAERI Tokamak-60). The performance tests have proven that the device provides high speed pellets as planned. The maximum pellet velocity obtained in the hydrogen pellet tests is greater than 2.3km/s at 100 bar propellant gas. (author).

  18. Review of JT-60 experiment (March 1986)

    International Nuclear Information System (INIS)

    1986-11-01

    Results of JT-60 experiment with ohmic heating in March 1986 are summarized. A maximum plasma current of 2 MA, an average plasma density of 5.7 x 10 19 m -3 and energy confinement time of 0.4 - 0.5 sec were obtained. Detailed characteristics of ohmic plasmas are discussed. (author)

  19. On The Roman Domination Stable Graphs

    Directory of Open Access Journals (Sweden)

    Hajian Majid

    2017-11-01

    Full Text Available A Roman dominating function (or just RDF on a graph G = (V,E is a function f : V → {0, 1, 2} satisfying the condition that every vertex u for which f(u = 0 is adjacent to at least one vertex v for which f(v = 2. The weight of an RDF f is the value f(V (G = Pu2V (G f(u. The Roman domination number of a graph G, denoted by R(G, is the minimum weight of a Roman dominating function on G. A graph G is Roman domination stable if the Roman domination number of G remains unchanged under removal of any vertex. In this paper we present upper bounds for the Roman domination number in the class of Roman domination stable graphs, improving bounds posed in [V. Samodivkin, Roman domination in graphs: the class RUV R, Discrete Math. Algorithms Appl. 8 (2016 1650049].

  20. Progress in JT-60 joint research

    International Nuclear Information System (INIS)

    Kimura, Haruyuki; Kikuchi, Mitsuru; Inutake, Masaaki

    2007-01-01

    It consists of five chapters; 1) introduction, 2) management system of joint plan and researches, 3) progress of joint researches, 4) results of researches and 5) summary. The second chapter stated the structure of management system of JT-60 joint researches, progress of management of the JT-60 experimental theme system, invitation the public to joint researches and selection of the subjects. The progress of joint researches contained the number of subjects, research members and organizations, change of joint research fields, remote control system of experiments, analysis code group, and number of reports. The main results of researches such as development of operation without center solenoid, Magneto-Hydro-Dynamics (MHD) control by electron cyclotron wave, plasma-wall interaction, application of laser technologies to plasma measurement, and comparison between tokamak and helical are reported. (S.Y.)

  1. Conceptual design of JT-60SA cryostat

    International Nuclear Information System (INIS)

    Shibama, Y.K.; Sakurai, S.; Masaki, K.; Sukekawa, A.M.; Kaminaga, A.; Sakasai, A.; Matsukawa, M.

    2008-01-01

    This paper describes the conceptual design of cryostat for the JT-60SA, which is a research device for the commercial production of electricity from the controlled fusion reaction in the future. JT-60SA is designed to be a fully superconducting device and cryostat is one of the main components to allow the normal operation. Cryostat covers up the tokamak device, which is 15 m of total height and 7 m of radius, and supports the total weight of 25 MN. Cryostat components consist of vessel body, gravity support and auxiliary systems, such as 80 K thermal shield and vacuum exhaust. The functions required of cryostat are these three, thermal insulation for superconducting magnets, gravity support for the tokamak device, and bio-shielding. The design conditions for each cryostat component are outlined and the features of auxiliary systems such as capacity of vacuum exhaust related to 80 K thermal shield design are summarized

  2. "Roman Pot" at the ISR

    CERN Multimedia

    CERN PhotoLab

    1980-01-01

    "Roman pots" are stainless steel containers, which can be moved from outside the vacuum chamber towards the beam. They house detectors which are conveniently at atmospheric pressure and can still be brought close to the limit of the circulating beam, to detect particles emanating at very small angles from the intersection of two colliding beams. Eifionydd Jones was the inventor of this device, highly successful at the ISR and now used again at the TOTEM experiment at the LHC. This particular Roman Pot, with a thickness of 0.2 mm, was built in 1980 for experiment R210 in intersection I-2, in preparation for proton-antiproton collisions in 1981. See also 7501065.

  3. Ion beam dump for JT-60 NBI

    International Nuclear Information System (INIS)

    Kuriyama, Masaaki; Horiike, Hiroshi; Matsuda, Shinzaburo; Morita, Hiroaki; Shibanuma, Kiyoshi

    1981-10-01

    The design of the active cooling type ion beam dump for JT-60 NBI which receives the total beam power of 5.6 MW for 10 sec continuously is described. It is composed of array of many finned tubes which is made of oxygen free copper with 0.2% silver content. The safety margin against thermal and mechanical troubles is estimated by the heat transfer and the thermal stress calculation. (author)

  4. Analytical Plan for Roman Glasses

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, Denis M.; Buck, Edgar C.; Mueller, Karl T.; Schwantes, Jon M.; Olszta, Matthew J.; Thevuthasan, Suntharampillai; Heeren, Ronald M.

    2011-01-01

    Roman glasses that have been in the sea or underground for about 1800 years can serve as the independent “experiment” that is needed for validation of codes and models that are used in performance assessment. Two sets of Roman-era glasses have been obtained for this purpose. One set comes from the sunken vessel the Iulia Felix; the second from recently excavated glasses from a Roman villa in Aquileia, Italy. The specimens contain glass artifacts and attached sediment or soil. In the case of the Iulia Felix glasses quite a lot of analytical work has been completed at the University of Padova, but from an archaeological perspective. The glasses from Aquileia have not been so carefully analyzed, but they are similar to other Roman glasses. Both glass and sediment or soil need to be analyzed and are the subject of this analytical plan. The glasses need to be analyzed with the goal of validating the model used to describe glass dissolution. The sediment and soil need to be analyzed to determine the profile of elements released from the glass. This latter need represents a significant analytical challenge because of the trace quantities that need to be analyzed. Both pieces of information will yield important information useful in the validation of the glass dissolution model and the chemical transport code(s) used to determine the migration of elements once released from the glass. In this plan, we outline the analytical techniques that should be useful in obtaining the needed information and suggest a useful starting point for this analytical effort.

  5. Vacuum leak test technique of JT-60

    International Nuclear Information System (INIS)

    Kaminaga, Atsushi; Arai, Takashi; Kodama, Kozo; Sasaki, Noboru; Saidoh, Masahiro

    1998-01-01

    Since a vacuum vessel of JT-60 is very large (167 m 3 ) and is combined with many components, such as magnetic coils, neutral beam injection systems and RF heating systems, etc., the position of leak testing exceeds 700. The two kind of techniques for vacuum leak test used in JT-60 has been described. Firstly the probe helium gas can be fed remotely in the three-dimensionally sectioned 54 regions of the JT-60 torus. The leak test was very rapidly performed by using this method. Secondly the helium detector system has been modified by the additional installation of the cryopump, which reduced the background level of the deuterium gas. The sensitivity of vacuum leak test with the cryopump was two orders of magnitude larger than that of without it. The examples of the performed vacuum leak test are stated. The vacuum leaks during experiments were 9 times. They were caused by thermal strain and plasma discharge. The vacuum leaks just after maintenance are 36 times which mainly caused by mis-installation. (author)

  6. FIR-laser scattering for JT-60

    International Nuclear Information System (INIS)

    Itagaki, Tokiyoshi; Matoba, Tohru; Funahashi, Akimasa; Suzuki, Yasuo

    1977-09-01

    An ion Thomson scattering method with far infrared (FIR) laser has been studied for measuring the ion temperature in large tokamak JT-60 to be completed in 1981. Ion Thomson scattering has the advantage of measuring spatial variation of the ion temperature. The ion Thomson scattering in medium tokamak (PLT) and future large tokamak (JET) requires a FIR laser of several megawatts. Research and development of FIR high power pulse lasers with power up to 0.6 MW have proceeded in ion Thomson scattering for future high-temperature tokamaks. The FIR laser power will reach to the desired several megawatts in a few years, so JAERI plans to measure the ion temperature in JT-60 by ion Thomson scattering. A noise source of the ion Thomson scattering with 496 μm-CH 3 F laser is synchrotron radiation of which the power is similar to NEP of the Schottky-barrier diode. However, the synchrotron radiation power is one order smaller than that when a FIR laser is 385 μm-D 2 O laser. The FIR laser power corresponding to a signal to noise ratio of 1 is about 4 MW for CH 3 F laser, and 0.4 MW for D 2 O laser if NEP of the heterodyne mixer is one order less. A FIR laser scattering system for JT-60 should be realized with improvement of FIR laser power, NEP of heterodyne mixer and reduction of synchrotron radiation. (auth.)

  7. Assembly work and transport of JT-60SA cryostat base

    International Nuclear Information System (INIS)

    Okano, Fuminori; Masaki, Kei; Yagyu, Jun-ichi; Shibama, Yusuke; Sakasai, Akira; Miyo, Yasuhiko; Kaminaga, Atsushi; Nishiyama, Tomokazu; Suzuki, Sadaaki; Nakamura, Shigetoshi; Shibanuma, Kiyoshi

    2013-11-01

    Japan Atomic Energy Agency started to construct a fully superconducting tokamak experiment device, JT-60SA, to support the ITER since January, 2013 at the Fusion Research and Development Directorate in Naka, Japan. The JT-60SA will be constructed with enhancing the previous JT-60 infrastructures, in the JT-60 torus hall, where the ex-JT-60 machine was disassembled. The JT-60SA Cryostat Base, for base of the entire tokamak structure, were assembly as the first step of this construction. The Cryostat Base (CB, 250tons) is consists of 7 main components made of stainless steel, in 12 m diameter and 3 m height. The CB was built in the Spain and transported to the Naka site, via Hitachi port. After pre-assembly work including preliminary measurements and sole plate adjustments of its height/flatness, the JT-60SA CB was carefully set on the sole plate. JT-60SA CB was assembled with high accuracy by using a laser tracker. The CB was adjusted in the height and flatness against the assembly reference position and determined by the absolute coordinates. This report introduces the concrete result of assembly work and transport of JT-60SA CB. (author)

  8. Fabrication of the vacuum vessel for JT-60 machine upgrade

    International Nuclear Information System (INIS)

    Uchikawa, T.; Takanabe, K.; Tsujimura, S.; Ue, K.; Oka, K.; Kuri, S.; Ioki, K.; Namiki, K.; Suzuki, Y.; Horliike, H.; Ninomiya, H.; Yamamoto, M.; Neyatani, Y.; Ando, T.; Matsukawa, M.

    1992-01-01

    The JT-60 tokamak was upgraded to double the plasma current to 6 MA. In the JT-60 machine upgrade (JT-60U), the vacuum vessel and poloidal field (PF) coils were renewed. The new vacuum vessel features a three-dimensionally curved, thin double-skin torus with multi-arc D-shaped cross section. The double-skin structure is strengthened with square pipes placed in between the outer and inner skins. Fabrication and site installation of the vessel was smoothly completed in February, 1991. This paper describes an overview of the JT-60U vacuum vessel construction

  9. Flaubert lecteur de romans historiques

    Directory of Open Access Journals (Sweden)

    Bernard Gendrel

    2009-12-01

    Full Text Available Les notes de lectures de Flaubert dans sa correspondance permettent de dégager deux types de romans historiques : le roman à sujet ancien, qui se doit, pour être vraisemblable, d'éloigner les personnages en réduisant la part d'explications psychologiques, et le roman à sujet contemporain, qui au contraire allie prise de distance (historique ou sociale et rapprochement (psychologique. Victor Hugo excellerait dans le premier mais pas dans le second. Quant à Flaubert, son obsession sera de réussir dans les deux.Flaubert’s reading notes in his correspondence allow us to identify two types of historical novels: the novel with an ancient subject, which, to be plausible, must keep characters at a distance and limit psychological explanations, and the novel with a contemporary subject which, on the contrary, both keeps aloof from historical or social questions and draws nearer to psychological questions. Victor Hugo excelled in the first but not in the second posture.  As for Flaubert, his obsession was be to be successful in both.

  10. JT8D and JT9D jet engine performance improvement program. Task 1: Feasibility analysis

    Science.gov (United States)

    Gaffin, W. O.; Webb, D. E.

    1979-01-01

    JT8D and JT9D component performance improvement concepts which have a high probability of incorporation into production engines were identified and ranked. An evaluation method based on airline payback period was developed for the purpose of identifying the most promising concepts. The method used available test data and analytical models along with conceptual/preliminary designs to predict the performance improvements, weight, installation characteristics, cost for new production and retrofit, maintenance cost, and qualitative characteristics of candidate concepts. These results were used to arrive at the concept payback period, which is the time required for an airline to recover the investment cost of concept implementation.

  11. Resisting the author: JT LeRoy's fictional authorship

    NARCIS (Netherlands)

    Loontjens, J.

    2008-01-01

    In the last decade, the interest in the relation between author and text, author and autobiography, seems to have grown. In my article, I use the story of the author JT LeRoy as a framework to analyse what this growing interest means for our understanding of the word "author." JT LeRoy’s work was

  12. Data Processing and Analysis Systems for JT-60U

    International Nuclear Information System (INIS)

    Matsuda, T.; Totsuka, T.; Tsugita, T.; Oshima, T.; Sakata, S.; Sato, M.; Iwasaki, K.

    2002-01-01

    The JT-60U data processing system is a large computer complex gradually modernized by utilizing progressive computer and network technology. A main computer using state-of-the-art CMOS technology can handle ∼550 MB of data per discharge. A gigabit ethernet switch with FDDI ports has been introduced to cope with the increase of handling data. Workstation systems with VMEbus serial highway drivers for CAMAC have been developed and used to replace many minicomputer systems. VMEbus-based fast data acquisition systems have also been developed to enlarge and replace a minicomputer system for mass data.The JT-60U data analysis system is composed of a JT-60U database server and a JT-60U analysis server, which are distributed UNIX servers. The experimental database is stored in the 1TB RAID disk of the JT-60U database server and is composed of ZENKEI and diagnostic databases. Various data analysis tools are available on the JT-60U analysis server. For the remote collaboration, technical features of the data analysis system have been applied to the computer system to access JT-60U data via the Internet. Remote participation in JT-60U experiments has been successfully conducted since 1996

  13. Development of magnetic sensors for JT-60SA

    Energy Technology Data Exchange (ETDEWEB)

    Takechi, M., E-mail: takechi.manabu@jaea.go.jp [Japan Atomic Energy Agency, Naka, Ibaraki 311-0193 (Japan); Matsunaga, G.; Sakurai, S.; Sasajima, T.; Yagyu, J.; Hoshi, R.; Kawamata, Y.; Kurihara, K. [Japan Atomic Energy Agency, Naka, Ibaraki 311-0193 (Japan); Nishikawa, T.; Ryo, T.; Kagamihara, S. [Okazaki Manufacturing Company, Kobe, Hyogo 651-0087 (Japan); Nakamura, K. [RIAM, Kyushu Univ., Kasuga, Fukuoka 816-8580,Japan (Japan)

    2015-10-15

    JT-60SA has been designed and is being constructed to demonstrate and develop steady-state high-beta operation. Resistive wall mode (RWM) control, error field correction, and edge-localized mode (ELM) control will be performed using in-vessel coils. For these controls, we have developed a biaxial magnetic sensor to determine 3D magnetic configuration of the plasma. Moreover, for obtaining basic information about JT-60SA plasma, magnetic sensors, in particular, one-turn loops, Rogowski coils, diamagnetic loops, and saddle coils have been developed. Because the length of the vacuum vessel in the poloidal direction of JT-60SA is 16 m and almost twice as long as that of JT-60U, the length of the Rogowski coil and the diamagnetic loop of JT-60SA are also twice as long as those on JT-60U. We have devised new types of sensors and a connector for the mineral-insulated cable because construction and installation of these sensors are much more difficult in JT-60SA. We will report the design and specification of the magnetic sensors for JT-60SA from the physics and engineering aspects.

  14. Low energy, high power injection in JT-60 NBI

    International Nuclear Information System (INIS)

    Mizuno, Makoto; Dairaku, Masayuki; Horiike, Hiroshi

    1988-05-01

    JT-60 neutral beam injector (JT-60 NBI) is designed to inject 20 MW neutral hydrogen beam at energies of 70 ∼ 100 keV and the injection power decreases significantly at low energies (∼40 keV). For the extention of operation region aiming at the low density plasma heating and achieving H-mode by plasma periphery heating, increment of the injection power at low beam energies was required. The single-stage acceleration system was investigated in advance at the Prototype Injector Unit. From this result, the total injection power of 17 MW at 40 keV, 48 A per source was expected at the JT-60 NBI. This system was adopted in the JT-60 NBI from June, 1987 to July, 1987 and 17.6 MW neutral beam injection power was achieved. In the NB heating experiment, the H-mode transition phenomena was observed in JT-60 plasma. (author)

  15. User's manual of JT-60 experimental data analysis system

    International Nuclear Information System (INIS)

    Hirayama, Takashi; Morishima, Soichi; Yoshioka, Yuji

    2010-02-01

    In the Japan Atomic Energy Agency Naka Fusion Institute, a lot of experiments have been conducted by using the large tokamak device JT-60 aiming to realize fusion power plant. In order to optimize the JT-60 experiment and to investigate complex characteristics of plasma, JT-60 experimental data analysis system was developed and used for collecting, referring and analyzing the JT-60 experimental data. Main components of the system are a data analysis server and a database server for the analyses and accumulation of the experimental data respectively. Other peripheral devices of the system are magnetic disk units, NAS (Network Attached Storage) device, and a backup tape drive. This is a user's manual of the JT-60 experimental data analysis system. (author)

  16. Disruption Studies in JT-60U

    International Nuclear Information System (INIS)

    Kawano, Y.; Yoshino, R.; Neyatani, Y.; Nakamura, Y.; Tokuda, S.; Tamai, H.

    2002-01-01

    Intensive studies on the physics of disruptions and developments of avoidance/mitigation methods of disruption-related phenomena have being carried out in JT-60U. The characteristics of the disruption sequence were well understood from the observation of the relationship between the heat pulse onto divertor plates during thermal quench and the impurity influx into the plasma, which determined the speed of the following current quench. A fast shutdown was first demonstrated by injecting impurity ice pellets to the plasma and intensively reducing the heat flux on first wall. The halo current and its toroidal asymmetry were precisely measured, and the halo current database was made for ITER in a wide parameter range. It was found that TPF x I h /I p0 was 0.52 at the maximum in a large tokamak like the JT-60U, whereas the higher factor of 0.75 had been observed in medium-sized tokamaks such as Alcator C-Mod and ASDEX-Upgrade. The vertical displacement event (VDE) at the start of the current quench was carefully investigated, and the neutral point where the VDE hardly occurs was discovered. MHD simulations clarified the onset mechanisms of the VDE, in which the eddy current effect of the up-down asymmetric resistive shell was essential. The real-time Z j measurement was improved for avoiding VDEs during slow current quench, and plasma-wall interaction was avoided by a well-optimized plasma equilibrium control. Magnetic fluctuations that were spontaneously generated at the disruption and/or enhanced by the externally applied helical field have been shown to avoid the generation of runaway electrons. Numerical analysis clarified an adequate rate of collisionless loss of runaway electrons in turbulent magnetic fields, which was consistent with the avoidance of runaway electron generation by magnetic fluctuations observed in JT-60U. Once generated, runaway electrons were suppressed when the safety factor at the plasma surface was reduced to 3 or 2

  17. Diagnostic planning in JT-60 project

    International Nuclear Information System (INIS)

    Matoba, Tohru; Suzuki, Yasuo; Funahashi, Akimasa; Itagaki, Tokiyoshi

    1977-08-01

    The diagnostic plans of JT-60 were made along with design of the main machine. Basic requirements of the diagnostic program are (1) multiple measurement of respective plasma parameters, (2) efficient usage of the discharge, (3) capable data acquisition system, (4) high reliability of the diagnostic equipments, and (5) systematic development of new diagnostic techniques. Dimensions of the diagnostic ports were determined in detailed design of the vacuum vessel, anticipating the possible diagnostic methods. The proposed diagnostic systems and the plans are shown in table and figures respectively. Problems in the diagnostics are also described. (auth.)

  18. Conceptual design of JT-60SA cryostat

    International Nuclear Information System (INIS)

    Shibama, Y.K.; Sakurai, S.; Masaki, K.; Sukekawa, A.M.; Kaminaga, A.; Yoshida, K.; Matsukawa, M.

    2007-01-01

    JT-60U modification program to fully superconducting device has been proceeded, namely ''JT-60SA'', toward early realization of fusion energy based on tokamak concept. The design of JT-60SA cryostat is expected to achieve a vacuum thermal insulation for super conducting coils, a bio-shielding boundary and structural gravity support. The cryostat is required to cover JT-60SA tokamak device, which is 15 m of total height and 7 m of radius, but there is geometrical limit due to surrounding devices reutilized. Although the cryostat consists of vessel body and gravity support, and the structural material is low cobalt 304 stainless steel (Co: 2 , and the design of the leaf spring is considered to reduce thermal stress, and to withstand the mechanical loads of plasma disruption and seismic loads. The coolant is 80 K gas helium and both sides of panel are covered with multi-layers super insulation (SI) to reduce heat load (radiation) up to 1/100. Fraction of non-covered region is assumed to be 2% due to many port-joints and supports for the vacuum vessel. Total heat load for inner surface of cryostat (600 m 2 ) is 9kW and the heat load for the port-joints (-300 m 2 ) is assumed up to 9 kW. The operational pressure of the cryostat is required to keep less than 10 -2 Pa and about 100,000 m 2 of structural surfaces is considered for exhaust system specification. Another role of the cryostat is the radiation protection. Biological shielding up to 10 micro-Sv/h (for maintenance acceptance) is required of the cryostat surface after the 10 years operation. Thus the cryostat consists of boron (2 wt%) doped concrete of 220 mm thickness and structural SS304 of total 40 mm thickness. The concrete reduces the air activation (41Ar) in the torus hall by 90% rather than the normal one by the thermal neutron absorption of boron. (orig.)

  19. Laser cleaning on Roman coins

    Science.gov (United States)

    Drakaki, E.; Karydas, A. G.; Klinkenberg, B.; Kokkoris, M.; Serafetinides, A. A.; Stavrou, E.; Vlastou, R.; Zarkadas, C.

    Ancient metal objects react with moisture and environmental chemicals to form various corrosion products. Because of the unique character and high value of such objects, any cleaning procedure should guarantee minimum destructiveness. The most common treatment used is mechanical stripping, in which it is difficult to avoid surface damage when employed. Lasers are currently being tested for a wide range of conservation applications. Since they are highly controllable and can be selectively applied, lasers can be used to achieve more effective and safer cleaning of archaeological artifacts and protect their surface details. The basic criterion that motivated us to use lasers to clean Roman coins was the requirement of pulsed emission, in order to minimize heat-induced damages. In fact, the laser interaction with the coins has to be short enough, to produce a fast removal of the encrustation, avoiding heat conduction into the substrate. The cleaning effects of three lasers operating at different wavelengths, namely a TEA CO2 laser emitting at 10.6 μm, an Er:YAG laser at 2.94 μm, and a 2ω-Nd:YAG laser at 532 nm have been compared on corroded Romans coins and various atomic and nuclear techniques have also been applied to evaluate the efficiency of the applied procedure.

  20. Maestro Roman Toi kodumaal / Tiiu Pikkur

    Index Scriptorium Estoniae

    Pikkur, Tiiu, 1947-

    2007-01-01

    Helilooja ja koorijuht Roman Toi osalemisest muuseumiõhtul "Kaunimad laulud pühendan Sul!" 21. mail Eesti Teatri- ja Muusikamuuseumis, helilooja 90. sünnipäevale pühendatud kontserdist 23. mail Tallinna Toomkirikus ja Roman Toi nimelisest kirikulaulude konkursist

  1. Single Finds. The case of Roman Egypt

    DEFF Research Database (Denmark)

    Christiansen, Erik

    2006-01-01

    Survery of single or stray finds from Roman Egypt and discussion of them as evidence for the circulation and use of coins......Survery of single or stray finds from Roman Egypt and discussion of them as evidence for the circulation and use of coins...

  2. Analysis of JT-60SA operational scenarios

    Science.gov (United States)

    Garzotti, L.; Barbato, E.; Garcia, J.; Hayashi, N.; Voitsekhovitch, I.; Giruzzi, G.; Maget, P.; Romanelli, M.; Saarelma, S.; Stankiewitz, R.; Yoshida, M.; Zagórski, R.

    2018-02-01

    Reference scenarios for the JT-60SA tokamak have been simulated with one-dimensional transport codes to assess the stationary state of the flat-top phase and provide a profile database for further physics studies (e.g. MHD stability, gyrokinetic analysis) and diagnostics design. The types of scenario considered vary from pulsed standard H-mode to advanced non-inductive steady-state plasmas. In this paper we present the results obtained with the ASTRA, CRONOS, JINTRAC and TOPICS codes equipped with the Bohm/gyro-Bohm, CDBM and GLF23 transport models. The scenarios analysed here are: a standard ELMy H-mode, a hybrid scenario and a non-inductive steady state plasma, with operational parameters from the JT-60SA research plan. Several simulations of the scenarios under consideration have been performed with the above mentioned codes and transport models. The results from the different codes are in broad agreement and the main plasma parameters generally agree well with the zero dimensional estimates reported previously. The sensitivity of the results to different transport models and, in some cases, to the ELM/pedestal model has been investigated.

  3. Heat structural problems in JT-60

    International Nuclear Information System (INIS)

    Takatsu, Hideyuki; Shimizu, Masaomi; Yamamoto, Masahiro; Nakamura, Hiroo; Miyauchi, Yasuyuki.

    1980-01-01

    The construction of JT-60 is in progress to study the behavior of hydrogen plasma. The D-T reaction does not occur in this device, therefore the considerations for neutron damage, tritium leakage and so on are not necessary. The long-pulse operation will be done, and the suppression of the production and mixing of impurity is considered in the design of the JT-60. The high temperature baking is possible, and the magnetic limiter is set. The vacuum container has the complex structure consists of 8 sector type thick rings and 8 U-shaped bellows, and has egg-shaped cross section. The main radius of the torus is about 3 m. The material of the vacuum container is INCONEL 625. The analyses of various stresses due to such as atmospheric pressure, eddy current and thermal expansion were made. It is also necessary to consider the thermal stress due to the leakage of neutral beam. The thermal input of about 20 MW per one discharge to the first wall is taken into consideration. The material of the first wall is molybdenum. (Kato, T.)

  4. "Roman Baths" in Contemporary Spa Tourism

    Directory of Open Access Journals (Sweden)

    Vesna Merc

    2005-07-01

    Full Text Available The commercialisation of images and symbols from antiquity, so characteristic of Slovenia since its independence, has been reflected over the last decade in spa tourism as well. Since the great crises in the sixties, and especially since the eighties, fifteen Slovene natural health resorts have concentrated on developing wellness and activities programs. This change in orientation has been accompanied by renovations, an expansion of the water surfaces and capacities, and new wellbeing, wellness, spirituality and beauty programs. An analysis of Slovene spas, wellness centres and hotel web pages shows that they frequently offer rooms, usually saunas, which are imitations of the Roman baths. These rooms are usually called "Roman saunas", "Tepidarium", "Caldarium", and "Roman-Irish baths". At Terme Ptuj, Zdravilišče Laško, Šmarješke Toplice, Grand Hotel Palace in Portorož, and Terme Čatež, saunas have been built or renovated in the Roman style. This trend of Roman rooms is a novelty, less than a decade old in Slovenia. The first sauna with a Roman theme, a Roman-Irish bath, was opened in 1997 in the Health and Beauty Centre at Terme Čatež. Modern Roman saunas are very popular, found not only in Slovenia but also in other parts of Europe, especially Germany and Austria. Their popularity has spread from the areas formerly occupied by the Romans to other parts of world, for example the USA and the Republic of South Africa. An analysis of Slovene saunas and wellness centres reveals a well-established trend to recreate certain parts of the Roman baths. This is attempted not only through Roman-style decorations, but also through certain structures particular to the Roman baths, such as the caldarium, tepidarium, and in one case even a laconicum. The approach, however, is highly eclectic, blending Roman, Greek and, above all, modern elements. The purpose of such rooms is to increase the appeal of the spas, while their design is mostly based on

  5. Den moderne tyske roman 1909-35

    DEFF Research Database (Denmark)

    Ved siden af klassikken og romantikken er den tidlige modernisme vel nok den betydeligste periode i tysksproget litteratur. Det skyldes ikke mindst den perlerække af romaner, der udkom i første tredjedel af det 20. århundrede, og hvoraf mange i dag fremstår som indiskutable højdepunkter i såvel...... tysk som europæisk roman- og litteraturhistorie. I Den moderne tyske roman 1909-35 behandles en række af disse romaner for første gang samlet på dansk. Bogen består af otte romanfortolkninger samt en indledende artikel om den moderne romans historie og særpræg. Alle artikler er skrevet med et solidt...... interesserede læser. I overensstemmelse med dens formidlende sigte er der kun medtaget fortolkninger af romaner, der foreligger på dansk i en tidssvarende oversættelse. Af hensyn til den litteraturhistoriske bredde er der desuden kun medtaget én roman af samme forfatter.Bogen indeholder analyser af: Robert...

  6. Communication systems in JT-60 control

    International Nuclear Information System (INIS)

    Kimura, T.; Hosogane, N.; Kondo, I.; Kumahara, T.; Kurihara, K.; Yonekawa, I.; Yoshino, R.

    1983-01-01

    A new concept in communication is applied to the JT-60 control system which handles a large amount of data for the plant support and monitoring and for the discharge control including plasma feedback control. The communication systems are characterized by 1) adoption of an efficient protocol in the central highways which are composed of dual serial CAMAC ones, 2) standardization of the protocol and data format between the central controller and each subsystem one, 3) adoption of a polling method for plant monitoring and of block transfer for discharge conditions and results, and 4) use of novel modules for the fast data transfer in the real-time systems. A compact tool has also been developed for testing the data communication

  7. The ALFA Roman Pot Detectors of ATLAS

    CERN Document Server

    Abdel Khalek, S.

    2016-11-23

    The ATLAS Roman Pot system is designed to determine the total proton-proton cross-section as well as the luminosity at the Large Hadron Collider (LHC) by measuring elastic proton scattering at very small angles. The system is made of four Roman Pot stations, located in the LHC tunnel in a distance of about 240~m at both sides of the ATLAS interaction point. Each station is equipped with tracking detectors, inserted in Roman Pots which approach the LHC beams vertically. The tracking detectors consist of multi-layer scintillating fibre structures readout by Multi-Anode-Photo-Multipliers.

  8. Tritium processing in JT-60U

    International Nuclear Information System (INIS)

    Miya, Naoyuki; Masaki, Kei

    1997-01-01

    Tritium retention analysis and tritium concentration measurement have been made during the large Tokamak JT-60U deuterium operations. This work has been carried out to evaluate the tritium retention for graphite tiles inside the vacuum vessel and tritium release characteristics in the tritium cleanup operations. JT-60U has carried out D-D experiments since July 1991. In the deuterium operations during the first two years, about 1.7 x 10 19 D-D fusion neutrons were produced by D (d, p) T reactions in plasma, which are expected to produce ∼31 GBq of tritium. The tritium produced is evacuated by a pumping system. A part of tritium is, however, trapped in the graphite tiles. Several sample tiles were removed from the vessel and the retained tritium Distribution in the tiles was measured using a liquid scintillator. The results of poloidal distribution showed that the tritium concentration in the divertor tiles was higher than that in the first wall tiles and it peaked in the tiles between two strike points of divertor magnetic lines. Tritium concentration in the exhaust gas from the vessel have also been measured with an ion chamber during the tritium cleanup operations with hydrogen divertor discharges and He-GDC. Total of recovered tritium during the cleanup operations was ∼ 7% of that generated. The results of these measurements showed that the tritium of 16-23 GBq still remained in the graphite tiles, which corresponded to about 50-70% of the tritium generated in plasma. The vessel is ventilated during the in-vessel maintenance works, then the atmosphere is always kept lower than the legal concentration guide level of 0.7 Bq/cm 3 for radiation work permit requirements. (author)

  9. Prazdnik podportshen / Oksana Smirnova, Vladimir Skripov, Vjatsheslav Ivanov...[jt.

    Index Scriptorium Estoniae

    2005-01-01

    Ülevaade diskussioonist Eestis, Lätis ja Leedus presidentide osalemise üle 9. mai pidustustel Moskvas. Juhan Partsi, Villu Reiljani, Toomas Hendrik Ilvese, Marko Mihkelsoni jt. arvamusi. Toimetuse seisukoht

  10. Prototype ion source for JT-60 neutral beam injectors

    International Nuclear Information System (INIS)

    Akiba, M.

    1981-01-01

    A prototype ion source for JT-60 neutral beam injectors has been fabricated and tested. Here, we review the construction of the prototype ion source and report the experimental results about the source characteristics that has been obtained at this time. The prototype ion source is now installed at the prototype unit of JT-60 neutral beam injection units and the demonstration of the performances of the ion source and the prototype unit has just started

  11. Darwin-industrien i højt gear

    DEFF Research Database (Denmark)

    Kjærgaard, Peter C.

    2008-01-01

    Darwin-industrien i højt gear. Næste år bliver et 'Darwin-år' - både tilhængere og kritikere gør sig klar. Udgivelsesdato: 12. december......Darwin-industrien i højt gear. Næste år bliver et 'Darwin-år' - både tilhængere og kritikere gør sig klar. Udgivelsesdato: 12. december...

  12. Operation and Development on the Positive-Ion Based Neutral Beam Injection System for JT-60 and JT-60U

    International Nuclear Information System (INIS)

    Kuriyama, M.; Akino, N.; Ebisawa, N.; Honda, A.; Itoh, T.; Kawai, M.; Mogaki, K.; Ohga, T.; Oohara, H.; Umeda, N.; Usui, K.; Yamamoto, M.; Yamamoto, T.; Matsuoka, M.

    2002-01-01

    The positive-ion based neutral beam injection (NBI) system for JT-60, which consists of 14 beamline units and has a beam energy of 70 to 100 keV, started operation in 1986 with hydrogen beams and injected a neutral beam power of 27 MW at 75 keV into the JT-60 plasma. In 1991, the NBI system was modified to be able to handle deuterium beams as part of the JT-60 upgrade modification. After executing some research and developments, deuterium beams of 40 MW at 95 keV were injected in 1996. As a result, NBI has contributed to the achievement of the highest performance plasmas, a DT-equivalent fusion power gain of 1.25 and a fusion triple product of 1.55 x 10 21 keVs/m 3 , in the world on JT-60U

  13. Translating Romans: some persistent headaches

    Directory of Open Access Journals (Sweden)

    A.B. du Toit

    2010-07-01

    Full Text Available Translating Romans: some persistent headaches Gone are the days when it was axiomatic that expertise in biblical languages automatically qualified one as a Bible translator. In 1949, Ronald Knox, who for nine years conscientiously struggled with translating the Bible for his generation, published a booklet under the title The trials of a translator. At that stage Bible translation as the subject of scientific study was still in its infancy. Since then, research into the intricacies of communicating the biblical message in an authentic but understandable manner, has made significant progress (cf. Roberts, 2009. However, the frustrations of Bible translators, first of all to really understand what the biblical authors wanted to convey to their original addressees, and then to commu-nicate that message to their own targeted readers in a meaningful way, have not disappeared. In fact, the challenge to meet the vary-ing requirements of the multiple kinds of translation that are present-ly in vogue, has only increased.

  14. LHC Report: a Roman potpourri

    CERN Multimedia

    Mike Lamont for the LHC Team

    2012-01-01

    The last couple of weeks of operation have been a mixed bag, with time dedicated to TOTEM and ALFA, a floating machine development period and luminosity calibration runs. These special running periods were interleaved with some standard proton running where we’ve struggled a little to recover previous highs. The LHC has now returned to more routine operation.   The TOTEM and ALFA run required the development of special optics to produce large beam sizes and smaller angular spread at the interaction points in ATLAS and CMS. These special optics produce shallower angled proton-proton collisions than normal and thus allow experiments to probe the very small angle scattering regime. (For more information visit the TOTEM and ALFA websites.) The qualification of the new set-up at 4 TeV went well, paving the way for a 13-hour physics run for both TOTEM and ALFA with their Roman pots in position. Highlights from the 48-hour machine development period included the injection of high intensity bun...

  15. The Fulcum, the Late Roman and Byzantine Testudo: the Germanization of Roman Infantry Tactics?

    Directory of Open Access Journals (Sweden)

    Philip Rance

    2010-11-01

    Full Text Available The tactic of forming a shield-wall, although called by the Germanic name fulcum first in Maurice’s Strategicon in the sixth century, has a long history of use by the Roman legions, and is not an instance of Germanic influence on Roman tactics.

  16. Status of JT-60 data processing system

    International Nuclear Information System (INIS)

    Matsuda, T.; Tsugita, T.; Oshima, T.; Sakata, S.; Sato, M.; Koiwa, M.; Aoyagi, T.

    2000-01-01

    The JT-60 data processing system is a large computer complex and gradually modernized by utilizing progressing computer and network technology. There are two major changes in our system. A main computer of FACOM M-780 has been replaced with compatible GS8300 using state-of-art CMOS technology, which results in lower power and space usage with nearly the same performance. Now it can handle ∼500 MB of data per discharge. A gigabit ethernet switch with FDDI ports has been introduced to cope with the increase of handling data. The switch will connect a tera-byte (TB) data server at the bandwidth of a gigabit per second with the main computer and many data acquisition workstations. Other developments in our system are the realization of three workstation-based plans, the TB data server, the VME-based fast data acquisition system and a CICU. The TB data server is basically a UNIX workstation with ∼100 GB RAID disks and ∼900 GB MO auto-exchangers. The VME-based fast data acquisition system has been developed to enlarge the present TMDS. The CICU, which has a function of interfacing the main computer with the CAMAC system, has been replaced with the workstation-based system after the fine tuning

  17. Analysis of ELM stability with extended MHD models in JET, JT-60U and future JT-60SA tokamak plasmas

    Science.gov (United States)

    Aiba, N.; Pamela, S.; Honda, M.; Urano, H.; Giroud, C.; Delabie, E.; Frassinetti, L.; Lupelli, I.; Hayashi, N.; Huijsmans, G.; JET Contributors, the; Research Unit, JT-60SA

    2018-01-01

    The stability with respect to a peeling-ballooning mode (PBM) was investigated numerically with extended MHD simulation codes in JET, JT-60U and future JT-60SA plasmas. The MINERVA-DI code was used to analyze the linear stability, including the effects of rotation and ion diamagnetic drift ({ω }* {{i}}), in JET-ILW and JT-60SA plasmas, and the JOREK code was used to simulate nonlinear dynamics with rotation, viscosity and resistivity in JT-60U plasmas. It was validated quantitatively that the ELM trigger condition in JET-ILW plasmas can be reasonably explained by taking into account both the rotation and {ω }* {{i}} effects in the numerical analysis. When deuterium poloidal rotation is evaluated based on neoclassical theory, an increase in the effective charge of plasma destabilizes the PBM because of an acceleration of rotation and a decrease in {ω }* {{i}}. The difference in the amount of ELM energy loss in JT-60U plasmas rotating in opposite directions was reproduced qualitatively with JOREK. By comparing the ELM affected areas with linear eigenfunctions, it was confirmed that the difference in the linear stability property, due not to the rotation direction but to the plasma density profile, is thought to be responsible for changing the ELM energy loss just after the ELM crash. A predictive study to determine the pedestal profiles in JT-60SA was performed by updating the EPED1 model to include the rotation and {ω }* {{i}} effects in the PBM stability analysis. It was shown that the plasma rotation predicted with the neoclassical toroidal viscosity degrades the pedestal performance by about 10% by destabilizing the PBM, but the pressure pedestal height will be high enough to achieve the target parameters required for the ITER-like shape inductive scenario in JT-60SA.

  18. Medicine in Balkans during the Roman Period.

    Science.gov (United States)

    Baykan, Daniş

    2017-08-04

    The aim of this study is to investigate the archaeological finds to enlighten the medical methods of treatments and operations applied in Balkans during Roman Period. Some independent local and regional find groups, taken from existing publications will be grouped together and a holistic point-of-view will be taken against medicine in Balkan Geography during Roman Period. Due to basic differences it contained, the data before Roman Period are excluded. Most of Greece and Aegean Islands are also excluded since the topic selected is "Medicine of Roman Period." Greece and Aegean Islands should be evaluated in another study in connection with West Anatolia which is closer than the Balkan Geography in terms of social relations. The spread of medical tools in Balkans during Roman Period is concentrated around military garrisons, and in settlements built around military pathways, and in settlements containing an amphitheater associated with gladiators. This spread is verified by the studies on Bulgaria in general. The data is also compatible with the assertion suggesting that the amount of application of pharmaceutical treatment increases when one moves away from the military centres.

  19. Advanced fusion technologies developed for JT-60 superconducting tokamak

    International Nuclear Information System (INIS)

    Sakasai, Akira; Ishida, S.; Matsukawa, M.

    2003-01-01

    The modification of JT-60U is planned as a full superconducting tokamak (JT-60SC). The objectives of the JT-60SC program are to establish scientific and technological bases for the steady-state operation of high performance plasmas and utilization of reduced-activation materials in economically and environmentally attractive DEMO reactor. Advanced fusion technologies relevant to DEMO reactor have been developed in the superconducting magnet technology and plasma facing components for the design of JT-60SC. To achieve a high current density in a superconducting strand, Nb 3 Al strands with a high copper ratio of 4 have been newly developed for the toroidal field coils (TFC) of JT-60SC. The R and D to demonstrate applicability of Nb 3 Al conductor to the TFC by a react-and-wind technique have been carried out using a full-size Nb 3 Al conductor. A full-size NbTi conductor with low AC loss using Ni-coated strands has been successfully developed. A forced cooling divertor component with high heat transfer using screw tubes has been developed for the first time. The heat removal performance of the CFC target was successfully demonstrated on the electron beam irradiation stand. (author)

  20. Present construction status and future plan of JT-60

    Energy Technology Data Exchange (ETDEWEB)

    Iso, Yasuhiko; Yoshikawa, Masaji [Japan Atomic Energy Research Inst., Tokai, Ibaraki. Tokai Research Establishment

    1982-04-01

    As for the critical plasma test facility JT-60, its detailed design was initiated in 1975, and the manufacture of the main body components was started in April, 1978, through the trial manufacture and development of important components. The manufacture of all the system equipment in factories is in progress. Especially, the essential components of main body have been almost completed, and ready to be installed in the building. The building is under construction, and a part of the equipment was brought in and installed since the beginning of 1982 fiscal year. JT-60 is composed of heating system, toroidal magnetic field coil power supply, poloidal magnetic field coil power supply, total control system, associated system for main body and various measuring equipment as well as the main body which consists of vacuum vessel, toroidal and poloidal magnetic field coils, base, primary cooling system, movable limiter and evacuating system. In this report, first the significance of JT-60 development and the outline of JT-60 are described, and the present construction status is reported. The specifications of the essential equipment of the main body and heating system and the measuring system configuration are listed in tables. The aims in JT-60 design are to make plasma generating pulse width longer, to obtain higher beta value in circular cross-section plasma, to install the magnetic limiter, and to realize compound second stage heating.

  1. Dynamic design of gas sorption J-T refrigerator

    International Nuclear Information System (INIS)

    Chan, C.K.

    1986-01-01

    A long-life Joule-Thomson refrigerator which is heat powered, involves no sealing, and has few mechanical parts and is desirable for longterm sensor cooling in space. In the gas-sorption J-T refrigerator, cooling is achieved by gas sorption (either adsorption or absorption) processes. Currently, a modular, single-stage refrigerator is being designed and built to be operated at 20 K. The design was analyzed using a dynamic model, which is described here. The model includes the kinetics of the compressors and the heat switches, the heat transfer of the pre-coolers and the heat exchangers, the on/off ratio of the check valves, and the impedance of the J-T valve. The cooling power, the cycle time, and the operating conditions were obtained in terms of the power input, the heat sink temperature, and the J-T impedance

  2. Dynamic design of gas sorption J-T refrigerator

    Science.gov (United States)

    Chan, C. K.

    1986-01-01

    A long-life Joule-Thomson refrigerator which is heat powered, involves no sealing, and has few mechanical parts is desirable for long-term sensor cooling in space. In the gas-sorption J-T refrigerator, cooling is achieved by gas sorption (either adsorption or absorption) processes. Currently, a modular, single-stage refrigerator is being designed and built to be operated at 20 K. The design was analyzed using a dynamic model, which is described here. The model includes the kinetics of the compressors and the heat switches, the heat transfer of the pre-coolers and the heat exchangers, the on/off ratio of the check valves, and the impedance of the J-T valve. The cooling power, the cycle time, and the operating conditions were obtained in terms of the power input, the heat sink temperature, and the J-T impedance.

  3. The archives of operational achievements in JT-60

    International Nuclear Information System (INIS)

    Seimiya, Munetaka

    2007-08-01

    Since the first plasma in JT-60 was achieved in April 1985, various experimental challenges have been successfully conducted, and currently producing many new findings. These achievements have been realized by large modifications for lower X-point divertor in 1987, for large plasma current upgrade in 1989-1991, for W-shaped divertor in 1997, and for long pulse discharge in 2002. Such developments contribute to have established JT-60 as the leading tokamak in the world. As a consequence of the 22-year operation, we have accumulated many operational and experimental data. This reports the operational records including troubles and availability, the outline of planning management, the safety control and the promotion procedure of operation in JT-60. (author)

  4. The term origo in Roman epigraphy

    Directory of Open Access Journals (Sweden)

    Rafael GONZÁLEZ FERNÁNDEZ

    2012-03-01

    Full Text Available It is sometimes very difficult to interpret the term origo, since it can refer to different elements such as birth, place of origin, family or tribe. From the Republican period the Romans used to include this type of information in their inscriptions after the mention of the name, although, curiously, they did not employ the term origo itself, but other forms of expression. In this work we suggest that in Roman epigraphy this term was used, from the end of the Second Century and during the first half of the Third Century A. D., mainly in the times of the Severan Dynasty.

  5. THE PHENOMENON OF ROMAN REPUBLICAN COINAGE IN PRE-ROMAN DACIA. A REXAMINATION OF THE EVIDENCE

    Directory of Open Access Journals (Sweden)

    Marius Grigore Stan

    2015-01-01

    Full Text Available This article offers a re-examination of the phenomenon of Roman Republican coinage during the pre-Roman period in Carpathian region. It is argued that by compiling the evidence into a multifaceted database, new insights are gained on the explanation of the currency in pre-Roman Dacia.Furthermore, the study employs statistical methods in an interdisciplinary approach to a better pinpoint the chronological point of entry for Republican denarii into the region. Due to the absence of archaeological context in many cases, coin hoards are the main focus of data collection.

  6. Development of the pellet injector for JT-60

    International Nuclear Information System (INIS)

    Kawasaki, Kouzo; Hiratsuka, Hajimo; Takatsu, Hideyuki; Shimizu, Masatsugu; Onozuka, Masanori; Uchikawa, Takashi; Iwamoto, Syuichi; Hashiri, Nobuo

    1989-01-01

    The pneumatic 4-shot pellet injector has been installed and operated for JT-60 (JAERI Tokamak-60). The performance tests have proved that the device provides high speed hydrogen pellets just as planned. The maximum pellet velocity obtained in the hydrogen pellet tests is greater than 1.6 km/sec at 50 bar propellant gas. The device is now in use for JT-60 contributing to plasma study. In this paper the outline of features and performance of the device is presented. (author). 4 refs.; 8 figs

  7. Nogle britiske romaner i 2007 - og en nobelpris

    DEFF Research Database (Denmark)

    Klitgård, Ebbe

    2008-01-01

    Genanmeldelse af Dorris Lessing, The Golden Notebook, nyanmeldelse af romaner af Anne Enright, Graham Swift, Ian McEwan og Jonathan Coe. Vurdering af den britiske romans "state of the arts" 2007. Udgivelsesdato: februar......Genanmeldelse af Dorris Lessing, The Golden Notebook, nyanmeldelse af romaner af Anne Enright, Graham Swift, Ian McEwan og Jonathan Coe. Vurdering af den britiske romans "state of the arts" 2007. Udgivelsesdato: februar...

  8. Female Aspirants to the Roman Catholic Priesthood.

    Science.gov (United States)

    Celmer, Virginia; Winer, Jane L.

    1990-01-01

    Investigated Holland vocational-personality types, job satisfaction, and psychological dysfunction among 85 parish priests, 55 nonparish priests, and 235 women who aspire to, but are barred from, ordination in the Roman Catholic Church. Found women's Holland-type code was most similar to code of clergy member as assigned by Dictionary of Holland…

  9. GRAN SASSO: Roman lead or physics experiments

    Energy Technology Data Exchange (ETDEWEB)

    Pascolini, Alessandro

    1991-09-15

    On June 15 at Oristano (Sardinia) a formal ceremony marked the start of an underwater archaeological campaign sponsored by the Istituto Nazionale di Fisica Nucleare (INFN) to recover the load of a Roman freighter (navis oneraria) which sank off Sardinia carrying an exceptionally large load of lead.

  10. Kuulus Roman Viktjuki Teater Tallinnas / Meelis Kapstas

    Index Scriptorium Estoniae

    Kapstas, Meelis, 1963-

    2000-01-01

    26. ja 27. mail Vene Kultuurikeskuses Roman Viktjuki Teatri külalisetendused. Mängitakse R. Viktjuki lavastust "Kellavärgiga apelsin" Anthony Burgessi romaani järgi ja Viktjuki versiooni Oscar Wilde'i kurbmängust "Salomé"

  11. Thracians in the Roman imperial navy

    DEFF Research Database (Denmark)

    Bekker-Nielsen, Tønnes

    2017-01-01

    The Roman fleets of the imperial period were crewed by provincials, not by Italians. Of the sailors and soldiers whose names and geographical origin are attested epigraphically (on military diplomas or epitaphs) almost 15% claim a Thracian origin; and among these, the majority identify themselves...

  12. Greek and Roman Mythology: English, Mythology.

    Science.gov (United States)

    Hargraves, Richard; Kenzel, Elaine

    The aim of the Quinmester course "Greek and Roman Mythology" is to help students understand mythological references in literature, art, music, science and technology. The subject matter includes: creation myths; myths of gods and heroes; mythological allusions in astrology, astronomy, literature, science, business, puzzles, and everyday…

  13. A Roman funerary inscription from Smederevo

    Directory of Open Access Journals (Sweden)

    Kovács Péter

    2016-01-01

    Full Text Available In this short paper the authors publish a Hungarian wartime postcard from Smederevo (Serbia, from 1916. It is reported that a Roman gravestone was found on the banks of the Danube and the text of the lost stone monument was also added. The authors intend to interpret the funerary text that was incorrectly transcribed.

  14. Characterization of the Roman curse tablet

    Science.gov (United States)

    Liu, Wen; Zhang, Boyang; Fu, Lin

    2017-08-01

    The Roman curse tablet, produced in ancient Rome period, is a metal plate that inscribed with curses. In this research, several techniques were used to find out the physical structure and chemical composition of the Roman curse tablet, and testified the hypothesis that whether the tablet is made of pure lead or lead alloy. A sample of Roman Curse Tablet from the Johns Hopkins Archaeological Museum was analyzed using several different characterization techniques to determine the physical structure and chemical composition. The characterization techniques used were including optical microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). Because of the small sample size, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and X-ray fluorescence (XRF) cannot test the sample. Results from optical microscopy and SEM, enlarged images of the sample surface were studied. The result revealed that the sample surface has a rough, non-uniform, and grainy surface. AFM provides three-dimensional topography of the sample surface, studying the sample surface in atomic level. DSC studies the thermal property, which is most likely a lead-alloy, not a pure lead. However, none of these tests indicated anything about the chemical composition. Future work will be required due to the lack of measures finding out its chemical composition. Therefore, from these characterization techniques above, the Roman curse tablet sample is consisted of lead alloy, not pure lead.

  15. JT-60U high performance regimes

    International Nuclear Information System (INIS)

    Ishida, S.

    1999-01-01

    High performance regimes of JT-60U plasmas are presented with an emphasis upon the results from the use of a semi-closed pumped divertor with W-shaped geometry. Plasma performance in transient and quasi steady states has been significantly improved in reversed shear and high- βp regimes. The reversed shear regime elevated an equivalent Q DT eq transiently up to 1.25 (n D (0)τ E T i (0)=8.6x10 20 m-3·s·keV) in a reactor-relevant thermonuclear dominant regime. Long sustainment of enhanced confinement with internal transport barriers (ITBs) with a fully non-inductive current drive in a reversed shear discharge was successfully demonstrated with LH wave injection. Performance sustainment has been extended in the high- bp regime with a high triangularity achieving a long sustainment of plasma conditions equivalent to Q DT eq ∼0.16 (n D (0)τ E T i (0)∼1.4x10 20 m -3 ·s·keV) for ∼4.5 s with a large non-inductive current drive fraction of 60-70% of the plasma current. Thermal and particle transport analyses show significant reduction of thermal and particle diffusivities around ITB resulting in a strong Er shear in the ITB region. The W-shaped divertor is effective for He ash exhaust demonstrating steady exhaust capability of τ He */τ E ∼3-10 in support of ITER. Suppression of neutral back flow and chemical sputtering effect have been observed while MARFE onset density is rather decreased. Negative-ion based neutral beam injection (N-NBI) experiments have created a clear H-mode transition. Enhanced ionization cross- section due to multi-step ionization processes was confirmed as theoretically predicted. A current density profile driven by N-NBI is measured in a good agreement with theoretical prediction. N-NBI induced TAE modes characterized as persistent and bursting oscillations have been observed from a low hot beta of h >∼0.1-0.2% without a significant loss of fast ions. (author)

  16. Performance verification tests of JT-60SA CS model coil

    Energy Technology Data Exchange (ETDEWEB)

    Obana, Tetsuhiro, E-mail: obana.tetsuhiro@LHD.nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Murakami, Haruyuki [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Takahata, Kazuya; Hamaguchi, Shinji; Chikaraishi, Hirotaka; Mito, Toshiyuki; Imagawa, Shinsaku [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Kizu, Kaname; Natsume, Kyohei; Yoshida, Kiyoshi [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

    2015-11-15

    Highlights: • The performance of the JT-60SA CS model coil was verified. • The CS model coil comprised a quad-pancake wound with a Nb{sub 3}Sn CIC conductor. • The CS model coil met the design requirements. - Abstract: As a final check of the coil manufacturing method of the JT-60 Super Advanced (JT-60SA) central solenoid (CS), we verified the performance of a CS model coil. The model coil comprised a quad-pancake wound with a Nb{sub 3}Sn cable-in-conduit conductor. Measurements of the critical current, joint resistance, pressure drop, and magnetic field were conducted in the verification tests. In the critical-current measurement, the critical current of the model coil coincided with the estimation derived from a strain of −0.62% for the Nb{sub 3}Sn strands. As a result, critical-current degradation caused by the coil manufacturing process was not observed. The results of the performance verification tests indicate that the model coil met the design requirements. Consequently, the manufacturing process of the JT-60SA CS was established.

  17. Structure design of the central solenoid in JT-60SA

    International Nuclear Information System (INIS)

    Asakawa, Shuji; Tsuchiya, Katsuhiko; Kuramochi, Masaya; Yoshida, Kiyoshi

    2009-09-01

    The upgrade of JT-60U magnet system to superconducting coils (JT-60SA: JT-60 Super Advanced) has been decided by parties of Japanese government (JA) and European commission (EU) in the framework of the Broader Approach (BA) agreement. The magnet system for JT-60SA consists of a central solenoid (CS), equilibrium field(EF) coils, toroidal field(TF) coils. The central solenoid consists the four winding pack modules. In order to counteract the thermal contraction as well as the electric magnetic repulsion and attraction together with other forces generated in each module, it is necessary to apply pre-loading to the support structure of the solenoid and to pursue a structure which is capable of sustaining such loading. In the present report, the structural design of the supporting structure of the solenoid and the jackets of the modules is verified analytically, and the results indicate that the structural design satisfies the 'Codes for Fusion Facilities - Rules on Superconducting Magnet Structure -'. (author)

  18. Airline fuel saving through JT9D engine refurbishment

    Energy Technology Data Exchange (ETDEWEB)

    Allison, J.W.; Weisel, D.R.

    1981-01-01

    Areas are identified in the JT9D engine where the potential exists for either further performance recovery following repair, or for improved performance retention. A number of new procedures and tools which will improve performance recovery are described. Improvements in inspection techniques are discussed. Operational techniques which will improve performance retention and impact degree of refurbishment required are also presented.

  19. Study of grounding system of large tokamak device JT-60

    International Nuclear Information System (INIS)

    Arakawa, Kiyotsugu; Shimada, Ryuichi; Kishimoto, Hiroshi; Yabuno, Kohei; Ishigaki, Yukio.

    1982-01-01

    In the critical plasma testing facility JT-60 constructed by the Japan Atomic Energy Research Institute, high voltage, large current is required in an instant. Accordingly, for the protection of human bodies and the equipment, and for realizing the stable operation of the complex, precise control and measurement system, a large scale facility of grounding system is required. In case of the JT-60 experimental facility, the equipments with different functions in separate buildings are connected, therefore, it is an important point to avoid high potential difference between buildings. In the grounding system for the JT-60, a reticulate grounding electrode is laid for each building, and these electrodes are connected with a low impedance metallic duct called grounding trunk line. The power supply cables for various magnetic field coils, control lines and measurement lines are laid in the duct. It is a large problem to grasp quantitatively the effect of a grounding trunk line by analysis. The authors analyzed the phenomenon that large current flows into a grounding system by lightning strike or grounding. The fundamental construction of the grounding system for the JT-60, the condition for the analysis and the result of simulation are reported. (Kako, I.)

  20. Recent results of JT-60U ICRF antenna operation

    International Nuclear Information System (INIS)

    Fujii, T.; Saigusa, M.; Kimura, H.

    1994-01-01

    Ion cyclotron range of frequencies (ICRF) heating is one of attractive plasma heating methods for reactor grade tokamaks, because it is quite effective in the wide ranges of plasma density and temperature. An antenna which should inject high power into plasma has been developed intensively because the heating efficiency and the coupling properties depend on its design. The antenna was operated at a small antenna-plasma gap in the JT-60 in out of phase mode, which showed the high heating efficiency to obtain high loading resistance, and similarly to other tokamaks. However, in order to reduce heat load to the antenna from plasma, a wide gap is required in reactor grade tokamaks such as ITER, in which the gap is designed to be 0.15 m in CDA. Two new antennas were fabricated for the JT-60U, which were designed to obtain high loading resistance at a wide gap for (π,0) phasing. The JT-60U ICRF heating system is explained. Also the JT-60U antenna is described. Antenna conditioning has been conducted well in the initial operation period. The phasing mode was set at (π,0) phasing, in which high heating efficiency is expected. The procedure is explained. The coupling and radiation loss properties during ICRF heating are reported. The JT-60U ICRF antennas were conditioned quickly with about 70 shots. The maximum coupled power was 6.4 MW for (π,0) phasing, and the power density was 6.1 MW/m 2 . (K.I.)

  1. Wine vessels (Vasa vinaria in roman law

    Directory of Open Access Journals (Sweden)

    Aličić Samir

    2017-01-01

    Full Text Available The notion of 'wine vessels' in Roman law comprises all the winecontaining recipients. There is no legal standardization of wine vessels by means of volume, and although the terms amphora, urna and culleus are used to designate both the vessels and the units of measure, these are two different meanings of the terms. In regard of the question, whether the vessels make appurtenance of the wine, jurisprudents of proculean school divided them in two categories. In the first category are those that follow legal status of wine, usually amphoras and other jars (cadi which are used for 'packaging', i. e. 'bottling' of the wine. The second category make mostly vats (cuppae and ceramic cisterns (dolia, which don't follow legal status of wine, making instead part of farming equipment of a landed property (instrumentum fundi and it's appurtenance. But, the roman jurists are not consistent regarding criteria for distinguishing these two categories.

  2. Beyond Romanization: The creolization of food. A framework for the study of faunal remains from Roman sites.

    Directory of Open Access Journals (Sweden)

    Gillian Hawkes

    1999-11-01

    Full Text Available The effects of the Roman conquest of Britain and the ensuing processes of Romanization have been studied for many years. The historical background to the development of the theory of Romanization has been widely discussed elsewhere (see Hingley 1996. Haverfield’s (1906 treatment of the topic was a major landmark in this development. He considered that the Roman conquest was a ‘good’ thing as it brought civilisation to the ‘natives’ who, recognising the superiority of Roman culture, willingly embraced `Roman-ness`. The theory of Romanization was further refined by Millett (1990 in The Romanization of Britain. The assumption that underlies Millett’s model is that cultural artefacts which to archaeologists look ‘Roman’ were perceived in the same way in the past. But need this be so? This paper will concern itself with looking at new approaches to culture change, especially relating to food, following the Roman conquest in Britain. It will aim to suggest methods of applying these new approaches to faunal remains, which will enable us to evolve a more subtle understanding of food in the Roman period.

  3. Marius and Trajan: Two Great Roman Strategists

    Science.gov (United States)

    1984-04-01

    soon respected as a good commander upon whom a soldier could count. His fairness of command is best demonstrated in an incident related by Plutarch ...to their discomfort and problems. (10:343) Plutarch also gave credit to Marius for altering the construction of the javelin. Marius replaced one of...Putnam’s Sons, 1927. 10. Plutarch (Translated by John Dryden, Revised by Arthur Hugh Clough). The Lives of the Noble Grecians and Romans. Chicago

  4. Sewerage system (cloaca) in Roman law

    OpenAIRE

    Aličić, Samir

    2012-01-01

    Sewerage system (cloaca), which implies any cavity through which waste water flows, has in Roman law a special legal protection due to its importance for public health preservation and safety of citizens. In Praetorian Edict, two interdicts are envisaged; one prohibitory, by which private sewerage system is protected and one restitutory, by which public sewerage system is protected. It is possible that a restitutory interdict about private sewerage system existed. By the public sewerage inter...

  5. First roman pot tested by TOTEM

    CERN Multimedia

    2006-01-01

    TOTEM, one of the smaller experiments of the LHC, successfully tested its first 'roman pot' detectors on 3 November. A total of eight will be installed in the LHC near the CMS cavern. Marco Oriunno, project engineer of TOTEM (right), with Jean-Michel Lacroix from TS/MME (Mechanical and Materials Engineering) (left), standing behind one of the roman pot detectors. There is a small tribe in the land of CERN. Among its artefacts you may find colourfully painted rocks, a totem made of cardboard boxes, and a few roman pots. Known by the name of TOTEM, or 'TOTal, Elastic and diffractive cross-section Measurement' (not a tribe motto), they are a relatively small collaborative group in comparison to the main LHC experiments, with approximately 50 'tribe members'. Unlike the four larger experiments that will analyse new particles produced as a result of the collisions, TOTEM will investigate the ones that almost missed each other. When two beams of protons travelling in opposite di...

  6. PIXE and XRF Analysis of Roman Denarii

    Science.gov (United States)

    Fasano, Cecilia; Raddell, Mark; Manukyan, Khachatur; Stech, Edward; Wiescher, Michael

    2017-09-01

    A set of Roman Denarii from the republican to the imperial period (140BC-240AD) has been studied using X-ray fluorescent (XRF) scanning and proton induced x-ray emission (PIXE) techniques. XRF and PIXE are commonly used in the study of cultural heritage objects because they are nondestructive. The combination of these two methods is also unique because of the ability to penetrate the sample with a broader spectrum of depths and energies than either could achieve on its own. The coins are from a large span of Roman history and their analysis serves to follow the economic and political change of the era using the relative silver and copper contents in each sample. In addition to analyzing the samples, the study sought to compare these two common analysis techniques and to explore the use of a standard to examine any shortcomings in either of the methods. Data sets were compared and then adjusted to a calibration curve which was created from the analysis of a number of standard solutions. The concentrations of the standard solutions were confirmed using inductively coupled plasma spectroscopy. Through this we were able to assemble results which will progress the basis of understanding of PIXE and XRF techniques as well as increase the wealth of knowledge of Ancient Roman currency.

  7. Development of integrated SOL/Divertor code and simulation study of the JT-60U/JT-60SA tokamaks

    International Nuclear Information System (INIS)

    Kawashima, H.; Shimizu, K.; Takizuka, T.

    2007-01-01

    To predict the particle and heat controllability in the divertor of tokamak reactors such as ITER and to optimize the divertor design, comprehensive simulations by integrated modelling with taking in various physical processes are indispensable. For the design study of ITER divertor, the modelling codes such as B2, UEDGE and EDGE2D have been developed, and their results have contributed to the evolution of the divertor concept. In Japan Atomic Energy Agency (JAEA), SOL/divertor codes have also been developed for the interpretation and the prediction on behaviours of plasmas, neutrals and impurities in the SOL/divertor regions. The code development is originally carried out since physics models can be verified quickly and flexibly under the circumstance of close collaboration with JT-60 team. Figure 1 shows our code system, which consists of the 2 dimensional fluid code SOLDOR, the neutral Monte Carlo (MC) code NEUT2D, and the impurity MC code IMPMC. The particle simulation code PARASOL has also been developed in order to establish the physics modelling used in fluid simulations. Integration of SOLDOR, NEUT2D and IMPMC, called the '' SONIC '' code, is being carried out to simulate self-consistently the SOL/divertor plasmas in present tokamaks and in future devices. Combination of the SOLDOR and NEUT2D was completed, which has the features such as 1) high-resolution oscillation-free scheme in solving fluid equations, 2) neutral transport calculation under the fine meshes, 3) success in reduction of MC noise, 4) optimization on the massive parallel computer, etc. The simulation reproduces the X-point MARFE in the JT-60U experiment. It is found that the chemically sputtered carbon at the dome causes the radiation peaking near the X-point. The performance of divertor pumping in JT-60U is evaluated from the particle balances. We also present the divertor designing of JT-60SA, which is the modification program of JT-60U to establish high beta steady-state operation. To

  8. Design of the movable limiters for JT-60

    International Nuclear Information System (INIS)

    Takashima, Tetsuo; Yamamoto, Masahiro; Nakamura, Hiroo; Ohkubo, Minoru; Ohta, Mitsuru

    1976-07-01

    Two fast-acting movable rail limiters will be used in JT-60 to suppress skin effect of the plasma current with a large radius. They travel safely through a stroke of about 1 m for 0.1 sec in the build-up phase of plasma current. The movable limiter system consists of a driving mechanism, a vacuum seal, a bearing used at high temperatures in a vacuum, a molybdenum rail limiter weighing 200 kg and its auxiliary members. Many problems are involved in construction of the system because the design specifications exceed the present technology. Described are design of the movable limiter system for JT-60 and problems in the mechanical, electrical and vacuum aspects. (auth.)

  9. Development of upgraded pellet injector for JT-60

    International Nuclear Information System (INIS)

    Onozuka, M.; Shimomura, T.; Tanaka, N.; Iwamoto, S.; Hashiri, N.; Oda, Y.; Minami, M.; Hiratsuka, H.; Kawasaki, K.; Takatsu, H.; Shimizu, M.

    1989-01-01

    The pneumatic 4-shot pellet injector had been in use for JT-60 (JAERI Tokamak-60) contributing to plasma studies in 1988. It could propel the pellets up to 1.6 km/sec at 50 bar propellant gas. In 1989, the new gun assembly has been reinstalled in the upgraded system to provide higher performance and reliability. The supply pressure of the propellant gas is to be raised to 100 bar to obtain higher pellet velocity up to 2.3 km/sec. The device is now in use for JT-60, and is expected to contribute to further plasma studies. In this paper the outline of features and performance of the device is presented. 5 refs., 9 figs

  10. High performance experiments in JT-60U reversed shear discharges

    International Nuclear Information System (INIS)

    Fujita, T.; Kamada, Y.; Ishida, S.

    2001-01-01

    The operation of JT-60U reversed shear discharges has been extended to a high plasma current, low-q regime keeping a large radius of the internal transport barrier (ITB) and the record value of equivalent fusion multiplication factor in JT-60U, Q DT eq =1.25, has been achieved at 2.6 MA. Operational schemes to reach the low-q regime with good reproducibility have been developed. The reduction of Z eff was obtained in the newly installed W-shaped pumped divertor. The beta limit in the low-q min regime, which limited the performance of L-mode edge discharges, has been improved in H-mode edge discharges with a broader pressure profile, which was obtained by power flow control with ITB degradation. Sustainment of ITB and improved confinement for 5.5 seconds has been demonstrated in an ELMy H reversed shear discharge. (author)

  11. Present status of the JT-60 control system

    International Nuclear Information System (INIS)

    Kimura, T.

    1992-01-01

    The present status of the control system for a large fusion device of the JT-60 upgrade tokamak is reported including its original design concept, the progress of the system in the past five-year operation and modification for the upgrade. The control system has the features of hierarchical structure, computer control, adoption of CAMAC interfaces and protective interlock by both software and hard-wired systems. Plant monitoring and control are performed by an efficient data communication via CAMAC highways. Sequential discharge control of is executed by a combination of computers and a timing system. A plasma feedback control system with fast 32-bit microprocessors and a man/machine interface with modern workstations have been newly developed for the operation of the JT-60 upgrade. (author)

  12. Divertor pumping system with NBI cryopump for JT-60

    International Nuclear Information System (INIS)

    Akino, Noboru; Kuriyama, Masaaki; Ohga, Tokumichi; Seki, Hiroshi; Tanai, Yutaka

    1998-08-01

    The pumping system for JT-60 W-shape divertor with the NBI cryopump have been developed. The pumping speed achieved in the divertor region was 13-15 m 3 /s for deuterium gas with three units of the NBI cryopumps. In a simulation experiment of helium ash exhaust through the divertor, pumping of a mixed gas of helium and deuterium has been demonstrated using the NBI cryosorption pumps covered with an argon condensed layer. Control of neutral particle pressure in the divertor region became possible by having remodeled an aperture of the existing fast shutter, which is installed between the JT-60 vacuum vessel and NBI beam-line, to be regulated. (author)

  13. Characteristics of large scale ionic source for JT-60

    Energy Technology Data Exchange (ETDEWEB)

    Fujiwara, Yukio; Honda, Atsushi; Inoue, Takashi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

    1997-02-01

    The Neutral Beam Injection (NBI) apparatus is expected for important role sharing apparatus to realize the plasma electric current drive and the plasma control in not only temperature upgrading of the plasma but also Tokamak nuclear fusion reactor for the next generation such as JT-60, ITER and so forth. Japan Atomic Energy Research Institute has developed the ionic source with high energy and large electric current for about 10 years. Some arrangement tests of the large negative ion source for JT-60 No. 1 were executed from June to October, 1995. As a series of arrangement tests, 400 KeV and 13.5 A of deuterium negative ion beam was successfully accelerated for 0.12 sec. under 0.22 Pa of low gas pressure. And, it was elucidated that electron electric current could be controlled efficiently even in deuterium negative ion beam. Here is described on the testing results in details. (G.K.)

  14. Dea Computrix - another deity for the Roman Pantheon? Journeys in the Roman Empire CD-Rom

    Directory of Open Access Journals (Sweden)

    T. Sam N. Moorhead

    2002-08-01

    Full Text Available This article outlines a personal view on the content and production of a CD-Rom on the Roman world produced by The British Museum, Channel 4, Verulamium Museum and Braunarts: Journeys in the Roman Empire. I discuss some of the benefits of and problems with multimedia production and outline feedback from various evaluation projects of the CD-Rom. I also briefly discuss the future of CD-Roms in the face of a rapidly expanding internet with reference to other multimedia projects at The British Museum.

  15. Experimental study of radiation losses on the JT-60 tokamak

    International Nuclear Information System (INIS)

    Nishitani, Takeo

    1990-06-01

    Bolometric measurement system and associated diagnostics, soft x-ray pulse-height-analyzer, soft x-ray intensity and Balmer α line measurement systems, were developed to investigate the radiation losses of the JT-60 plasmas. The bolometric measurement is the most important diagnostics in the radiation loss study. The soft x-ray pulse-height-analyzer is useful to estimate the metallic impurity concentration, and the soft x-ray intensity and Balmer α line measurements are monitors of radiation in x-ray region and particle recycling in the plasma edge, respectively. In JT-60, the marfe has been observed frequently in high-Ip and high density limited discharges with NB heating after the replacement of the first wall from TiC coated molybdenum tiles to graphite ones. The threshold electron density of the marfe onset increased with the NB power. The empirical scaling of the marfe onset taking account of the NB power was obtained. This scaling was useful to predict the marfe onset condition in NB heated discharges on JT-60. The marfe was modelled based on the radiative thermal instability. The simple model can explain the marfe onset condition. The radiated power from the plasma with marfe was about 90 % of the absorbed power. Both stored energy and central electron temperatures did not change by the marfe onset in spite of the such intense radiation loss. Finally, this study revealed that the most clean plasma was obtained in the metallic first wall with the divertor on JT-60. This fact is suggesting the capability of the metallic material for the first wall of next devices. Enhance radiation localized in the peripheral plasma such as marfe and IDC does not degrade the core plasma confinement or somewhat improves it, so that marfe and IDC are suitable operational regime in the high density region for future devices because they have strong remote-radiative-cooling-effect. (J.P.N.)

  16. Review of JT-60U experimental results in 1997

    International Nuclear Information System (INIS)

    Adachi, H.; Akasaka, H.; Akino, N.

    1998-08-01

    The JT-60U experiments in 1997 focused mainly on the steady-state tokamak research with the newly installed W-shaped pumped divertor and the negative ion based neutral beam (NNB) in addition to the existing profile and shape control techniques developed in JT-60U. In particular, the research on divertor physics was accelerated under the new divertor system with many of fine diagnostics: Detachment characteristics, pumping control, impurity control, recycling characteristics, etc. in the W-shaped divertor were investigated in detail. The main purpose of confinement and stability studies in 1997 was to improve steadiness of high confinement plasmas with the new divertor. Researches progressed also for the formation conditions of the internal and the surface transport barriers in the high-β p mode, the reversed shear mode and the H-mode. Toward the advanced feedback controls of multiple parameters, the JT-60U started new feedback controls of central line density and divertor neutral gas pressure in addition to the existing controls of off-axis line density, radiation power and neutron production rate. The JT-60U team also carefully studied characteristics of halo current during disruptions. Optimization of NNB operation progressed steadily and injection power increased up to 4.2MW. The NNB-driven current was identified directly from the internal magnetic measurement and driven current profile was confirmed to be consistent with the ACCOME calculation. The current profile control with LHCD successfully sustained the internal transport barrier in reversed shear plasmas. Continuous TAE modes were observed with NNB for the first time as beam-driven TAE modes. (J.P.N.)

  17. Requirements for tokamak remote operation: Application to JT-60SA

    International Nuclear Information System (INIS)

    Innocente, Paolo; Barbato, Paolo; Farthing, Jonathan; Giruzzi, Gerardo; Ide, Shunsuke; Imbeaux, Frédéric; Joffrin, Emmanuel; Kamada, Yutaka; Kühner, Georg; Naito, Osamu; Urano, Hajime; Yoshida, Maiko

    2015-01-01

    Highlights: • We analyzed the data management system (DMS) appropriate for international collaboration. • We define the principal requirements for all components of the DMS. • We evaluated application of DMS requirements to the JT-60SA experiment. • We evaluated the role network bandwidth and time delay between EU and Japan. - Abstract: Remote operation and data analysis are becoming key requirements of any fusion devices. In this framework a well-conceived data management system integrated with a suite of analysis and support tools are essential components for an efficient remote exploitation of any fusion device. The following components must be considered: data archiving data model architecture; remote data and computers access; pulse schedule, data analysis software and support tools; remote control room specifications and security issues. The definition of a device-generic data model plays also important role in improving the ability to share solution and reducing learning time. As for the remote control room, the implementation of an Operation Request Gateway has been identified as an answer to security issues meanwhile remotely proving all the required features to effectively operate a device. Previous requirements have been analyzed for the new JT-60SA tokamak device. Remote exploitation is paramount in the JT-60SA case which is expected to be jointly operated between Japan and Europe. Due to the geographical distance of the two parties an optimal remote operation and remote data-analysis is considered as a key requirement in the development of JT-60SA. It this case the effects of network speed and delay have been also evaluated and tests have confirmed that the performance can vary significantly depending on the technology used.

  18. Review of JT-60U experimental results in 1997

    Energy Technology Data Exchange (ETDEWEB)

    Adachi, H.; Akasaka, H.; Akino, N. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

    1998-08-01

    The JT-60U experiments in 1997 focused mainly on the steady-state tokamak research with the newly installed W-shaped pumped divertor and the negative ion based neutral beam (NNB) in addition to the existing profile and shape control techniques developed in JT-60U. In particular, the research on divertor physics was accelerated under the new divertor system with many of fine diagnostics: Detachment characteristics, pumping control, impurity control, recycling characteristics, etc. in the W-shaped divertor were investigated in detail. The main purpose of confinement and stability studies in 1997 was to improve steadiness of high confinement plasmas with the new divertor. Researches progressed also for the formation conditions of the internal and the surface transport barriers in the high-{beta}{sub p} mode, the reversed shear mode and the H-mode. Toward the advanced feedback controls of multiple parameters, the JT-60U started new feedback controls of central line density and divertor neutral gas pressure in addition to the existing controls of off-axis line density, radiation power and neutron production rate. The JT-60U team also carefully studied characteristics of halo current during disruptions. Optimization of NNB operation progressed steadily and injection power increased up to 4.2MW. The NNB-driven current was identified directly from the internal magnetic measurement and driven current profile was confirmed to be consistent with the ACCOME calculation. The current profile control with LHCD successfully sustained the internal transport barrier in reversed shear plasmas. Continuous TAE modes were observed with NNB for the first time as beam-driven TAE modes. (J.P.N.)

  19. Requirements for tokamak remote operation: Application to JT-60SA

    Energy Technology Data Exchange (ETDEWEB)

    Innocente, Paolo, E-mail: paolo.innocente@igi.cnr.it [Consorzio RFX, Corso Stati Uniti 4, 35127 Padova (Italy); Barbato, Paolo [Consorzio RFX, Corso Stati Uniti 4, 35127 Padova (Italy); Farthing, Jonathan [CCFE, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Giruzzi, Gerardo [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Ide, Shunsuke [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Imbeaux, Frédéric; Joffrin, Emmanuel [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Kamada, Yutaka [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Kühner, Georg [Max-Planck-Institute for Plasma Physics, EURATOM Association, Wendelsteinstr. 1, 17491 Greifswald (Germany); Naito, Osamu; Urano, Hajime; Yoshida, Maiko [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan)

    2015-10-15

    Highlights: • We analyzed the data management system (DMS) appropriate for international collaboration. • We define the principal requirements for all components of the DMS. • We evaluated application of DMS requirements to the JT-60SA experiment. • We evaluated the role network bandwidth and time delay between EU and Japan. - Abstract: Remote operation and data analysis are becoming key requirements of any fusion devices. In this framework a well-conceived data management system integrated with a suite of analysis and support tools are essential components for an efficient remote exploitation of any fusion device. The following components must be considered: data archiving data model architecture; remote data and computers access; pulse schedule, data analysis software and support tools; remote control room specifications and security issues. The definition of a device-generic data model plays also important role in improving the ability to share solution and reducing learning time. As for the remote control room, the implementation of an Operation Request Gateway has been identified as an answer to security issues meanwhile remotely proving all the required features to effectively operate a device. Previous requirements have been analyzed for the new JT-60SA tokamak device. Remote exploitation is paramount in the JT-60SA case which is expected to be jointly operated between Japan and Europe. Due to the geographical distance of the two parties an optimal remote operation and remote data-analysis is considered as a key requirement in the development of JT-60SA. It this case the effects of network speed and delay have been also evaluated and tests have confirmed that the performance can vary significantly depending on the technology used.

  20. Structural analysis of the JT-60SA cryostat vessel body

    Energy Technology Data Exchange (ETDEWEB)

    Botija, José, E-mail: jose.botija@ciemat.es [Association EURATOM – CIEMAT, Avda. Complutense 40, 28040 Madrid (Spain); Alonso, Javier; Fernández, Pilar; Medrano, Mercedes; Ramos, Francisco; Rincon, Esther; Soleto, Alfonso [Association EURATOM – CIEMAT, Avda. Complutense 40, 28040 Madrid (Spain); Davis, Sam; Di Pietro, Enrico; Tomarchio, Valerio [Fusion for Energy, JT-60SA European Home Team, 85748 Garching bei Munchen (Germany); Masaki, Kei; Sakasai, Akira; Shibama, Yusuke [JAEA – Japan Atomic Energy Agency, Naka Fusion Institute, Ibaraki 311-0193 (Japan)

    2013-10-15

    Highlights: ► Structural analysis to validate the JT-60SA cryostat vessel body design. ► Design code ASME 2007 “Boiler and Pressure Vessel Code. Section VIII”. ► First buckling mode: load multiplier of 10.644, higher than the minimum factor 4.7. ► Elastic and elastic–plastic stress analysis meets ASME against plastic collapse. ► Bolted fasteners have been analyzed showing small gaps closed by strong welding. -- Abstract: The JT-60SA cryostat is a stainless steel vacuum vessel (14 m diameter, 16 m height) which encloses the Tokamak providing the vacuum environment (10{sup −3} Pa) necessary to limit the transmission of thermal loads to the components at cryogenic temperature. It must withstand both external atmospheric pressure during normal operation and internal overpressure in case of an accident. The paper summarizes the structural analyses performed in order to validate the JT-60SA cryostat vessel body design. It comprises several analyses: a buckling analysis to demonstrate stability under the external pressure; an elastic and an elastic–plastic stress analysis according to ASME VIII rules, to evaluate resistance to plastic collapse including localized stress concentrations; and, finally, a detailed analysis with bolted fasteners in order to evaluate the behavior of the flanges, assuring the integrity of the vacuum sealing welds of the cryostat vessel body.

  1. Recent developments in the JT-60 data processing system

    International Nuclear Information System (INIS)

    Matsuda, T.; Saitoh, N.; Tsugita, T.; Oshima, T.; Sakata, S.; Sato, M.; Koiwa, M.; Watanabe, K.

    1999-01-01

    The JT-60 data processing system was originally a large computer complex system including a lot of micro-computers, several mini-computers, and a mainframe computer. Recently, several improvements have been made to the original system to modernize the system. Many sub-systems composed of aged mini-computers have been replaced with workstations by utilizing recent progress in computer and network technologies. The system can handle ∝300 MB of raw data per discharge, which is three times larger than the amount in the original system. These improvements have been applied to develop element technologies necessary to the remote participation in JT-60 experiments. A remote diagnostics control and monitoring system and a computer system for access to JT-60 data from the Internet are used together with video conferencing systems for a real-time communication. In 1996, the remote participation based on them was successfully demonstrated in collaboration with Japan Atomic Energy Research Institute, Los Alamos National Laboratory, and Princeton Plasma Physics Laboratory. (orig.)

  2. Plasma equilibrium response modelling and validation on JT-60U

    International Nuclear Information System (INIS)

    Lister, J.B.; Sharma, A.; Limebeer, D.J.N.; Wainwright, J.P.; Nakamura, Y.; Yoshino, R.

    2002-01-01

    A systematic procedure to identify the plasma equilibrium response to the poloidal field coil voltages has been applied to the JT-60U tokamak. The required response was predicted with a high accuracy by a state-space model derived from first principles. The ab initio derivation of linearized plasma equilibrium response models is re-examined using an approach standard in analytical mechanics. A symmetric formulation is naturally obtained, removing a previous weakness in such models. RZIP, a rigid current distribution model, is re-derived using this approach and is compared with the new experimental plasma equilibrium response data obtained from Ohmic and neutral beam injection discharges in the JT-60U tokamak. In order to remove any bias from the comparison between modelled and measured plasma responses, the electromagnetic response model without plasma was first carefully tuned against experimental data, using a parametric approach, for which different cost functions for quantifying model agreement were explored. This approach additionally provides new indications of the accuracy to which various plasma parameters are known, and to the ordering of physical effects. Having taken these precautions when tuning the plasmaless model, an empirical estimate of the plasma self-inductance, the plasma resistance and its radial derivative could be established and compared with initial assumptions. Off-line tuning of the JT-60U controller is presented as an example of the improvements which might be obtained by using such a model of the plasma equilibrium response. (author)

  3. Development of multilayer piezoelectric actuator valve for JT-60

    International Nuclear Information System (INIS)

    Miyo, Yasuhiko; Hiratsuka, Hajime; Masui, Hiroshi; Hosogane, Nobuyuki; Miya, Naoyuki

    2001-11-01

    In order to improve the gas injection valve used for the operation of JT-60, a new type of valve (multilayer piezoelectric actuator valve) was developed. The conventional valve (bimorph piezoelectric valve) has been used for 15 years since the beginning of experimental operation in April, 1985. However, it came to be hard to keep the performance of the valve because of the deterioration of the driving source, i.e. piezoelectric element. Developments of the new valve were carried out based on experiences through experimental operations in JT-60. Requirements for the design are: (1) to be hard structure for making a sheet leak, (2) to allow a repair work at atmosphere side without an air vent of the vacuum vessel, (3) to be more smaller and lighter compared with the conventional one, and (4) to have a high maintenance efficiency by utilizing of the commercial piezoelectric elements and power supplies. The newly developed valve was examined with various tests such as gas flow characteristic test, high magnetic field proof test, high temperature proof test and gas flow rate test for aged deterioration. Results, confirm that the performance of the valve is applicable for JT-60 operations. (author)

  4. Waveguide circuit for LHRF heating in 'JT-60'

    International Nuclear Information System (INIS)

    Uehara, Kazuya; Saegusa, Mikio; Mizuno, Takenori; Sano, Keigo; Hara, Mitsuru; Oishi, Isamu; Kanai, Takao.

    1985-01-01

    As the heating method for attaining the critical condition in the critical plasma experiment apparatus 'JT-60' in the Japan Atomic Energy Research Institute, in addition to Joule heating, as the second heating method, neutral beam injection heating and high frequency heating have been adopted. For this high frequency heating, several tens to 200 MHz band of ICRF heating, several hundreds MHz to several GHz band of LHRF heating and several tens to 200 GHz band of ECR heating were considered, and in the JT-60, 100 MHz band (ICRF) and 2 GHz band (LHRF) have been adopted. Furukawa Electric Co., Ltd. has engaged in the development and manufacture of the waveguides of transmission system used for this high frequency heating through NEC Corp. This high frequency heating is to heat plasma by injecting high frequency radio waves into plasma proper, and reaches 10 MW for the whole high frequency heating. The system efficiently transmitting the radio waves of large power from a Klystron as a high frequency source to the JT-60 is the transmission system. The outline of the waveguides of the 2 GHz band transmission system and the individual performance of respective waveguides are reported. (Kako, I.)

  5. The Roman Catholic position on abortion.

    Science.gov (United States)

    Barry, R

    1997-01-01

    This article presents the history and grounds of the official position of the Roman Catholic Church that abortion under any circumstances, including abortion to save the life of the mother, should be prohibited. After an introduction that deplores the lack of mercy shown to killers of abortionists while Catholic priests threatened by pro-abortion forces are not offered protection, the article traces the historic development of the Catholic abortion policy and rebuts arguments that abortion was permitted in the early Christian Church. The next section explains Catholic views on the personhood of a conceptus and refutes the contentions of Joseph Donceel that early abortion should be permitted because of uncertainty about the nature of the conceptus and the possibility of delayed animation. The fourth section of the paper debates the points raised by Susan Teft Nicholson who maintains that the Catholic position regarding abortion rests on the Church's animosity towards sexual pleasure. The paper goes on to criticize Nicholson's claims that the Roman Catholic position on abortion is inconsistent with the Church's own understanding of the Principle of Double Effect because the Church fails to allow abortion in many cases where it would be permissible under the Principle. Section 6 describes the underlying motive of the Roman Catholic Church's abortion position as an attempt to protect the innocent fetus from deliberate death and to justify the Church's application of protection from deliberate killing to those who are innocent of aggressive action. This discussion is followed by a justification of the Church's prohibition of abortion in cases of aggression, such as the aggression ascribed to a fetus when a pregnancy imperials the life of a mother. It is concluded that the US will likely legalize suicide and mercy killing as it has the killing of innocent fetuses who are probably ensouled with personhood and are not formal aggressors.

  6. The Cult of the Roman Emperor before and after Christianity

    DEFF Research Database (Denmark)

    Warmind, Morten

    1993-01-01

    This paper is concerned with a complete set of rituals and certain connected ideas, namely the Roman emperor-cult, that had survived the change of religion from Roman religion to Christianity. The rituals endure, even while their mythological basis is perishing. The emperor-cult includes the ritu......This paper is concerned with a complete set of rituals and certain connected ideas, namely the Roman emperor-cult, that had survived the change of religion from Roman religion to Christianity. The rituals endure, even while their mythological basis is perishing. The emperor-cult includes...

  7. Roman Lyariev, How to Skin Your Kill

    OpenAIRE

    Gedeeva, Darina; Ubushieva, Bamba; Babaev, Andrei

    2016-01-01

    Roman explains how to skin a fox. First, one needs to prepare the ground by trampling it. Skinning should be done with a small sharp knife. A freshly killed fox skins easily. Then one needs to treat the skin with an anti-flea spray. At home the skin should be stretched on a triangular wooden panel called in Russian pravilka and left in a dry room for up to five days. People usually go hunting when foxes are on heat and are busy fighting with each other for females. When the wind is strong, fo...

  8. An ovarian teratoma of late Roman age.

    Science.gov (United States)

    Armentano, Núria; Subirana, Mercè; Isidro, Albert; Escala, Oscar; Malgosa, Assumpció

    2012-12-01

    We report here a very unusual pelvic calcification recovered from the remains of a 30-40-year-old woman found at the late Roman period archeological site of La Fogonussa (Lleida, Catalonia). Although differential diagnoses for calcifications of the pelvis are complicated in archeological contexts, the precise localization, macroscopic features, and the presence of teeth along with part of a small bone led us to identify this case as an ovarian teratoma, based upon gross observations and computerized tomography (CT). Copyright © 2012 Elsevier Inc. All rights reserved.

  9. Roman Engineering, Public Works and Importance of Public Objects in Roman Law

    Directory of Open Access Journals (Sweden)

    Vanessa Ponte-Arrebola

    2017-01-01

    Full Text Available The skill and ability of the Romans in civil engineering and public works largely contributed to the establishment and success of their civilization. Many of the constructed works were built for the possibility of public use and enjoyment by its citizens, known as res publicae in usu publico.

  10. 1st Roman Young Researchers Meeting Proceedings

    CERN Document Server

    Cannuccia, E; Pietrobon, D; Stellato, F; Veneziani, M

    2009-01-01

    During the last few decades scientists have been able to test the bases of the physics paradigms, where the quantum mechanics has to match the cosmological scales. Between the extremes of this scenario, biological phenomena and their complexity take place, challenging the laws we observe in the atomic and sub-atomic world. In order to explore the details of this world, new huge experimental facilities are under construction. These projects involve people coming from several countries and give physicists the opportunity to work together with chemists, biologists and other scientists. The Roman Young Researchers Meeting is a conference, organised by Ph. D. students and young postdocs connected to the Roman area. It is aimed primarily at graduate students and post-docs, working in physics. The 1st conference has been held on the 21st of July 2009 at the University of Roma Tor Vergata. It was organised in three sessions, devoted to Astrophysics and Cosmology, Soft and Condensed Matter Physics and Theoretical and ...

  11. Roman capitals from Sirmium (Sremska Mitrovica, Serbia

    Directory of Open Access Journals (Sweden)

    Maver Andreja

    2009-01-01

    Full Text Available The article brings a detailed formal analysis of the Roman capitals from Sirmium, in the light of the stone analysis conducted on the material at the Museum of Srem and elsewhere in Sremska Mitrovica. The capitals dot the historical development of the town from the first half of the 2nd century until the 4th century. First made of regional limestone, they were later joined by those of limestone and marbles of distant source, whereby different stones in capitals coexisted almost throughout the town’s development. This was certainly the situation during the flourishing times of the late 3rd and the 4th century, when Sirmium, as one of the four capitals of the Roman Empire, stood within several formal circles of capitals. The plain-leaved capitals tie it to the rest of Pannonia, the Corinthianizing capitals to the provinces to the east and south, while part of the Asiatic capitals, the largest group, tie it to the wider area of the Mediterranean.

  12. Tokoh Dan Penokohan Dalam Roman Panglipur Wuyung

    Directory of Open Access Journals (Sweden)

    Imam Budi Utomo

    2012-06-01

    Full Text Available Penelitian ini bertujuan untuk mengungkapkan model tokoh dan penokohan yang men­ jadi ciri umum dalam roman panglipur wuyung. Untuk itu, teori intrinsik yang mengkhususkan pa­da unsur tokoh dan penokohan digunakan untuk menganalisisnya. Dari hasil penelitian dapat di­ketahui bahwa sebagian besar tokoh dan penokohan dalam roman panglipur wuyung memiliki ti­pologi yang sama, yakni menampilkan tokoh berwatak datar (bersifat hitam­putih, tam­ pan/cantik, mengusung tokoh hero, dan lain­lain yang merupakan tokoh ideal dengan penggambaran yang klise. Abstract: This research aims to reveal the common feature of character and characterization models in the panglipur wuyung novelette. Therefore, the intrinsic theory specializing in characters and characterizations is used to analyze it. From the research result, it can be seen that most of the characters and characterizations in the panglipur wuyung novelette have the same typology, which shows flat character (black and white features handsome/beautiful, and carries the hero figures etc. which is an ideal figure of cliche depiction. Key Words: character and characterization, typology, panglipur wuyung novelette

  13. Relating 2-Rainbow Domination To Roman Domination

    Directory of Open Access Journals (Sweden)

    Alvarado José D.

    2017-11-01

    Full Text Available For a graph G, let R(G and yr2(G denote the Roman domination number of G and the 2-rainbow domination number of G, respectively. It is known that yr2(G ≤ R(G ≤ 3/2yr2(G. Fujita and Furuya [Difference between 2-rainbow domination and Roman domination in graphs, Discrete Appl. Math. 161 (2013 806-812] present some kind of characterization of the graphs G for which R(G − yr2(G = k for some integer k. Unfortunately, their result does not lead to an algorithm that allows to recognize these graphs efficiently. We show that for every fixed non-negative integer k, the recognition of the connected K4-free graphs G with yR(G − yr2(G = k is NP-hard, which implies that there is most likely no good characterization of these graphs. We characterize the graphs G such that yr2(H = yR(H for every induced subgraph H of G, and collect several properties of the graphs G with R(G = 3/2yr2(G.

  14. Literacy and recitation in the Roman Empire

    Directory of Open Access Journals (Sweden)

    Letícia Fantin Vescovi

    2010-12-01

    Full Text Available In our modern societies, the paradigm of reading is individual and silent. However, far from being the only one possible, this wasn’t even the main form of reading in the Ancient times. The text doesn’t exist outside its materiality, and, if the current standard is the printed object, it was, for a long time, a form of transmission connected to practices of orality. In the Roman world, the main form of circulation of the literary text was the recitation, which happened in various ways: public or private recitations, literary contests where the text was judged from an oral performance, and even recitation when the text was been produced. We aim at observing the reading practices of the Roman society through poetic texts and at getting to know the reading protocols of that society at the moment when the maximum expansion of the written culture is achieved, i.e., the first and second centuries AD. 

  15. J.T. van der Kemp and Eighteenth century coded subjectivity | Smit ...

    African Journals Online (AJOL)

    It then proceeds to an analysis of the impact of J.T. van der Kemp, 1799-1804. Theoretically I draw on the distinction between morality and ethics by Michel Foucault as well as his theorising of eighteenth century representational thought. Keywords: J.T. van der Kemp, morality, ethics, models for missionary engagement, ...

  16. Design of distributed JT (Joule-Thomson) effect heat exchanger for superfluid 2 K cooling device

    Science.gov (United States)

    Jeong, S.; Park, C.; Kim, K.

    2018-03-01

    Superfluid at 2 K or below is readily obtained from liquid helium at 4.2 K by reducing its vapour pressure. For better cooling performance, however, the cold energy of vaporized helium at 2 K chamber can be effectively utilized in a recuperator which is specially designed in this paper for accomplishing so-called the distributed Joule-Thomson (JT) expansion effect. This paper describes the design methodology of distributed JT effect heat exchanger for 2 K JT cooling device. The newly developed heat exchanger allows continuous significant pressure drop at high-pressure part of the recuperative heat exchanger by using a capillary tube. Being different from conventional recuperative heat exchangers, the efficient JT effect HX must consider the pressure drop effect as well as the heat transfer characteristic. The heat exchanger for the distributed JT effect actively utilizes continuous pressure loss at the hot stream of the heat exchanger by using an OD of 0.64 mm and an ID of 0.4 mm capillary tube. The analysis is performed by dividing the heat exchanger into the multiple sub-units of the heat exchange part and JT valve. For more accurate estimation of the pressure drop of spirally wound capillary tube, preliminary experiments are carried out to investigate the friction factor at high Reynolds number. By using the developed pressure drop correlation and the heat transfer correlation, the specification of the heat exchanger with distributed JT effect for 2 K JT refrigerator is determined.

  17. Josephus' Antiquities 1-11 and Greco-Roman Historiography

    DEFF Research Database (Denmark)

    Friis, Martin

    The dissertation Josephus’ Antiquities 1-11 and Greco-Roman historiography provides an extensive study in five chapters of the various ways in which Josephus presents himself as an historian in the first eleven books of the Antiquities. From this analysis, it emerges that his manner of self......-portrayal is closely comparable with that of a number of Greco-Roman historians....

  18. Using Roman Sites: A Teacher's Guide. Education on Site.

    Science.gov (United States)

    Watson, Iain

    This book is about finding the evidence to help pupils discover the Romans, especially in Britain. The Romans changed the culture and landscape of Britain and left a wide range of evidence to be investigated today. Pupils need to be presented this range of evidence and the interpretations put on them. The evidence presented is both archaeological…

  19. Doctors in ancient Greek and Roman rhetorical education.

    Science.gov (United States)

    Gibson, Craig A

    2013-10-01

    This article collects and examines all references to doctors in rhetorical exercises used in ancient Greek and Roman schools in the Roman Empire. While doctors are sometimes portrayed positively as philanthropic, expert practitioners of their divinely sanctioned art, they are more often depicted as facing charges for poisoning their patients.

  20. How to romanize Korean characters in international journals

    Directory of Open Access Journals (Sweden)

    Sun Huh

    2017-08-01

    Full Text Available For editors and manuscript editors, the romanization of Korean characters is a topic that should be understood thoroughly, because Korean proper nouns have become more widely used worldwide due to phenomena such as Hallyu (the Korean wave. In this report, I describe the 2 major romanization systems used in Korea: the Korean government’s romanization system and the McCune-Reischauer system. I also describe the transliteration guidelines presented in a variety of reference styles, such as the CSE (Council of Science Editors, ACS (American Chemical Society, AMA (American Medical Association, APA (American Psychological Association, IEEE (Institute of Electrical and Electronics Engineers styles and the NLM (National Library of Medicine style guide. I found that 2 journals have adopted the Korean government’s romanization system, while 10 use the McCune-Reischauer system. Other journals do not specifically mention a romanization system. Editors should select a romanization system and use it consistently. When presenting a reference that includes romanized text, the journal’s house style should be followed, based on international reference citation styles. Chinese characters in documents published in Korea should be romanized according to the Korean pronunciation.

  1. THE EVOLUTION OF ROMAN FRONTIER CONCEPT AND POLICY

    Directory of Open Access Journals (Sweden)

    George Cupcea

    2015-03-01

    Full Text Available The Roman power is, ideologically, infinite in time and space. Nevertheless, the Roman state had experienced a wide variety of territorial limits, evolving in time and space, more or less throughout a millennium. If at first the Roman state, limited to Rome metropolitan area, later to the Italian peninsula, was easily defensible, beginning with the heavy expansion, also came trouble. The Romans, always innovating, find solutions for the fortification of the contact zones with the Barbarians. The Roman frontier concept was fundamentally different from the modern one. If the defence of Roman possessions was obviously priority, the border should remain an open ensemble, allowing for the free circulation of people and goods, some of the fundamental Roman rights. The peak of Roman expansion, 2nd century A.D. brings also the maximum development of the Empire frontier. Dacia overlaps widely chronologically on this trend, this being one of the reasons for one of the most complex frontier system in the Empire.

  2. Operation and management manual of JT-60 experimental data analysis system

    International Nuclear Information System (INIS)

    Hirayama, Takashi; Morishima, Soichi

    2014-03-01

    In the Japan Atomic Energy Agency Naka Fusion Institute, a lot of experiments have been conducted by using the large tokamak device JT-60 aiming to realize fusion power plant. In order to optimize the JT-60 experiment and to investigate complex characteristics of plasma, JT-60 experimental data analysis system was developed and used for collecting, referring and analyzing the JT-60 experimental data. Main components of the system are a data analysis server and a database server for the analyses and accumulation of the experimental data respectively. Other peripheral devices of the system are magnetic disk units, NAS (Network Attached Storage) device, and a backup tape drive. This is an operation and management manual the JT-60 experimental data analysis system. (author)

  3. A four-pellet pneumatic injection system in the JT-60

    International Nuclear Information System (INIS)

    Hiratsuka, Hajime; Kawasaki, Kouzo; Miyo, Yasuhiko; Yoshioka, Yuji; Ohta, Kazuya; Shimizu, Masatsugu; Kondo, Ikuo; Onozuka, Masanori; Shimomura, Tomoyoshi; Iwamoto, Syuichi; Hashiri, Noboru

    1991-01-01

    A four-pellet pneumatic injection system has been developed for plasma fueling of the JT-60. The JT-60 pellet injector is capable of accelerating separately four cylindrical pellets 3.0 mm in diameter x 3.0 mm long for two pellets and 4.0 mm in diameter x 4.0 mm long for the remaining two. The JT-60 pellet injector was installed on the JT-60 tokamak machine at the end of 1988. Obtained pellet velocity was higher than 2300 m/s by propellant gases of up to 100 bar and the pellet fueling efficiency achieved was around 70% for both dimensions of pellets. This paper describes the design, injection operation and performance test results of the JT-60 pellet injector. (orig.)

  4. A four-pellet pneumatic injection system in the JT-60

    Energy Technology Data Exchange (ETDEWEB)

    Hiratsuka, Hajime; Kawasaki, Kouzo; Miyo, Yasuhiko; Yoshioka, Yuji; Ohta, Kazuya; Shimizu, Masatsugu; Kondo, Ikuo (Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan)); Onozuka, Masanori; Shimomura, Tomoyoshi; Iwamoto, Syuichi; Hashiri, Noboru (Mitsubishi Heavy Industries Ltd., Kobe (Japan))

    1991-05-01

    A four-pellet pneumatic injection system has been developed for plasma fueling of the JT-60. The JT-60 pellet injector is capable of accelerating separately four cylindrical pellets 3.0 mm in diameter x 3.0 mm long for two pellets and 4.0 mm in diameter x 4.0 mm long for the remaining two. The JT-60 pellet injector was installed on the JT-60 tokamak machine at the end of 1988. Obtained pellet velocity was higher than 2300 m/s by propellant gases of up to 100 bar and the pellet fueling efficiency achieved was around 70% for both dimensions of pellets. This paper describes the design, injection operation and performance test results of the JT-60 pellet injector. (orig.).

  5. Conceptual design of a new supervisory control system for JT-60SA

    International Nuclear Information System (INIS)

    Totsuka, Toshiyuki; Sakata, Shinya

    2009-05-01

    The functions of JT-60 discharge control computer system and the data processing computer system will be integrated into a new JT-60SA supervisory control system to improve the operational efficiency of the JT-60 control computer system. In this report, we first show the necessary requirements for the new JT-60SA supervisory control system that should have high cost performance and maintainability. Next, overall system image of the new JT-60SA supervisory control system is presented and the necessary functions and the issues to be solved in the development are shown. Finally, the necessary manpower for this development and performance of the computer hardware, and the expected reduction of maintenance cost of the computer system are described. (author)

  6. Neural-net disruption predictor in JT-60U

    International Nuclear Information System (INIS)

    Yoshino, R.

    2003-01-01

    The prediction of major disruptions caused by the density limit, the plasma current ramp-down with high internal inductance l i , the low density locked mode and the β-limit has been investigated in JT-60U. The concept of 'stability level', newly proposed in this paper to predict the occurrence of a major disruption, is calculated from nine input parameters every 2 ms by the neural network and the start of a major disruption is predicted when the stability level decreases to a certain level, the 'alarm level'. The neural network is trained in two steps. It is first trained with 12 disruptive and six non-disruptive shots (total of 8011 data points). Second, the target output data for 12 disruptive shots are modified and the network is trained again with additional data points generated by the operator. The 'neural-net disruption predictor' obtained has been tested for 300 disruptive shots (128 945 data points) and 1008 non-disruptive shots (982 800 data points) selected from nine years of operation (1991-1999) of JT-60U. Major disruptions except for those caused by the -limit have been predicted with a prediction success rate of 97-98% at 10 ms prior to the disruption and higher than 90% at 30 ms prior to the disruption while the false alarm rate is 2.1% for non-disruptive shots. This prediction performance has been confirmed for 120 disruptive shots (56 163 data points), caused by the density limit, as well as 1032 non-disruptive shots (1004 611 data points) in the last four years of operation (1999-2002) of JT-60U. A careful selection of the input parameters supplied to the network and the newly developed two-step training of the network have reduced the false alarm rate resulting in a considerable improvement of the prediction success rate. (author)

  7. Review of JT-60 experiment (April-June, 1985)

    International Nuclear Information System (INIS)

    1986-11-01

    Initial ohmic heating experiments in JT-60 were performed for a three month period of April-June 1985. A maximum plasma current of 1.6 MA was obtained for both divertor and limiter discharges. Low-q discharges of q eff = 2.5 and high density discharges of 4.8 x 10 19 m -3 were obtained in the divertor configuration. Typical divertor actions, i.e. particle exhaust, heat exhaust, impurity reduction and remote radiative cooling were demonstrated. (author)

  8. Energy confinement in JT-60 lower hybrid current driven plasmas

    International Nuclear Information System (INIS)

    Ushigusa, K.; Imai, T.; Naito, O.; Ikeda, Y.; Tsuji, S.; Uehara, K.

    1990-01-01

    The energy confinement in high power lower hybrid current driven (LHCD) plasmas has been studied in the JT-60 tokamak. At a plasma current of 1 MA, the diamagnetically estimated energy confinement time in LHCD plasmas has almost the same value as the confinement time in ohmically heated plasmas at n-bar e ∼ 1.0x10 19 m -3 . The confinement time of high power LHCD plasmas (P LH E varies as to P LH α n e β I p 0 with α + β ∼ -0.3. (author). Letter-to-the-editor. 12 refs, 5 figs

  9. Development of the piezoelectric gas injection valve for JT-60

    International Nuclear Information System (INIS)

    Kawasaki, Kazuo; Hiratuka, Hajime

    1986-01-01

    Piezoelectric gas injection valve (PEV) for JT-60 have been developed which was a piezo-electric element. The raliability of the PEV under the actual condition of high magnetic fields and high temperatures are veryfied, and it became clear that the PEV had enough throughput range and sufficient repetability for long life throughput characteristics. Remarkables of the developed PEV are summarized as follows, (1) The maximum throughput rate, responce time and helium leakage rate satisfy the desiged specifications. (2) Throughput equation for PEV is clarified by comparison with experiment. (3) Reliabilities of PEV under the actual condition during coil power test become clear. (author)

  10. Roman contre roman dans l’organisation du manuscrit du Vatican, Regina Latina 1725

    Directory of Open Access Journals (Sweden)

    Francis Gingras

    2012-08-01

    Full Text Available Alors que les développements structuralistes et post-structuralistes ont favorisé la “textualisation” de la littérature médiévale, l’auteur suggère que la recontextualisation de la réception du roman médiéval passe par un retour aux manuscrits. Appliquée au manuscrit du Vatican, Regina Latina 1725, cette hypothèse de recherche révèle une technique de contrepoint que permet la juxtaposition de différents romans et dont, en dernier recours, le lecteur est toujours un peu juge.

  11. Astrology in Ancient Greek and Roman Culture

    Science.gov (United States)

    Campion, Nicholas

    2018-04-01

    This article deals with astrology in Greek and Roman culture. It considers astrology's theoretical background, technical basis, interpretative conventions, social functions, religious and political uses, and theory of fate, as well as critiques of it. Astrology is the name given to a series of diverse practices based in the idea that the stars, planets, and other celestial phenomena possess significance and meaning for events on Earth. It assumes a link between Earth and sky in which all existence—spiritual, psychological, and physical—is interconnected. Most premodern cultures practiced a form of astrology. A particularly complex variety of it evolved in Mesopotamia in the first and second millennia BCE from where it was imported into the Hellenistic world from the early 4th century BCE onward. There it became attached to three philosophical schools: those pioneered by Plato, Aristotle, and the Stoics, all of which shared the assumption that the cosmos is a single, living, integrated whole. Hellenistic astrology also drew on Egyptian temple culture, especially the belief that the soul could ascend to the stars. By the 1st century CE the belief in the close link between humanity and the stars had become democratized and diversified into a series of practices and schools of thought that ranged across Greek and Roman culture. It was practiced at the imperial court and in the street. It could be used to predict individual destiny, avert undesirable events, and arrange auspicious moments to launch new enterprises. It could advise on financial fortunes or the condition of one's soul. It was conceived of as natural science and justified by physical influences, or considered to be divination, concerned with communication with the gods and goddesses. In some versions the planets were neither influences nor causes of events on Earth, but timing devices, which indicated the ebb and flow of human affairs, like the hands on a modern clock. Astrology had a radical view of

  12. Stone mortars in Roman Cisalpine: new specimens

    Directory of Open Access Journals (Sweden)

    Andrea Caffini

    2010-07-01

    Full Text Available The mortar, made of stone or marble, represents artifact in Cisalpine widespread elsewhere in the Roman world. the morphologies are substantially grouped into two basic shapes: type 1 presents a hemispherical bowl more or less flattened, Type 2 is characterized by a conical reverse body, more or less flared. In the mortars were subjected to pounding and grinding, using a pestle driven by hand, raw materials of various origin. The fields of application were mainly three: alimentary, officinal and cosmetic. In some cases the generic definition of mortar is applied improperly to marble containers probably only be used for ornamental. It 'also demonstrated the use of artifacts attributable to type 2 as a function of urns. Therefore, in reference to decontextualized pieces, you should use a definition not unique, reflecting the different possible meanings of the artifact.

  13. The design study of the JT-60SU device. No. 3. The superconductor-coils of JT-60SU

    International Nuclear Information System (INIS)

    Ushigusa, Kenkichi; Mori, Katsuharu; Nakagawa, Syouji

    1997-03-01

    The superconducting coil systems and the cryogenic system for the JT-60 Super Upgrade (JT-60SU) has been designed. Both Nb 3 Al and NbTi as a superconducting wire material are employed in the toroidal coils (D-shaped 18 coils) to realize a high field magnet with a low cost. Significant reduction of the coil weight (150 tons/coil) without losing the coil rigidity has been achieved by connecting two toroidal coils with shear panels. Validity of this design is confirmed by the detailed structural analysis and thermohydraulic analysis. The poloidal coil system consists of 4 central solenoid coils with (NbTi) 3 Sn and 6 outer equilibrium field coils with NbTi. This system has an enough capability to supply the flux of 170Vs to produce a 10MA discharge with 200s of flat-top and to make various plasma configurations. The construction procedure of the poloidal coil system is also established under the constraint of the JT-60 site. Two sets of race-track shaped superconducting coils mounted on the top of the machine is designed to compensate the error field inside the vessel by supplying helical (m=2/n=1) magnetic field. By using cryogenic system with a 36kW of cooling capacity, the total cold weight of around 4000tons can be cooled down to 4.5K within one month, and steady heat load of 6.5kW and transient heat load of 9.0MJ can be removed within 30 minutes of discharge repetition rate. (author)

  14. Magnetic field measurements of JT-60SA CS model coil

    Energy Technology Data Exchange (ETDEWEB)

    Obana, Tetsuhiro, E-mail: obana.tetsuhiro@LHD.nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Takahata, Kazuya; Hamaguchi, Shinji; Chikaraishi, Hirotaka; Mito, Toshiyuki; Imagawa, Shinsaku [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Kizu, Kaname; Murakami, Haruyuki; Natsume, Kyohei; Yoshida, Kiyoshi [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

    2015-01-15

    Highlights: • Magnetic fields of the JT-60SA CS model coil were measured. • While the coil current was held constant at 20 kA, magnetic fields varied slightly with several different long time constants. • We investigated coils consisting of CIC conductors and having long time constants. - Abstract: In a cold test of the JT-60SA CS model coil, which has a quad-pancake configuration consisting of a Nb{sub 3}Sn cable-in-conduit (CIC) conductor, magnetic fields were measured using Hall sensors. For a holding coil current of 20 kA, measured magnetic fields varied slightly with long time constants in the range 17–571 s, which was much longer than the time constant derived from a measurement using a short straight sample. To validate the measurements, the magnetic fields of the model coil were calculated using a computational model representing the positions of Nb{sub 3}Sn strands inside the CIC conductor. The calculated results were in good agreement with the measurements. Consequently, the validity of the magnetic field measurements was confirmed. Next, we investigated other coils consisting of CIC conductors and having long time constants. The only commonality among the coils was the use of CIC conductors. At present, there is no obvious way to prevent generation of such magnetic-field variations with long time constants.

  15. Analyses of plasma parameter profiles in JT-60U

    Energy Technology Data Exchange (ETDEWEB)

    Shirai, Hiroshi; Shimizu, Katsuhiro; Hayashi, Nobuhiko [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Itakura, Hirofumi; Takase, Keizou [CSK Co. Ltd., Tokyo (Japan)

    2001-01-01

    The methods how diagnostics data are treated as the surface quantity of magnetic surface and processed to the profile data in the JT-60U plasmas are summarized. The MHD equilibrium obtained by solving Grad-Shafranov equation on the MHD equilibrium calculation and registration software FBEQU are saved shot by shot as a database. Various experimental plasma data measured at various geometrical positions on JT-60 are mapped onto the MHD equilibrium and treated as functions of the volume averaged minor radius {rho} on the experimental data time slice monitoring software SLICE. Experimental data are integrated and edited on SLICE. The experimental data measured as the line integral values are transformed by Able inversion. The mapped data are fitted to a functional form and saved to the profile database MAP-DB. SLICE can also read data from MAP-DB and redisplay and transform them. In addition, SLICE can generate the profile data TOKRD as run data for orbit following Monte-Carlo (OFMC) code, analyzer for current drive consistent with MHD equilibrium (ACCOME) code and tokamak predictive and interpretive code system (TOPICS). (author)

  16. Analyses of plasma parameter profiles in JT-60U

    International Nuclear Information System (INIS)

    Shirai, Hiroshi; Shimizu, Katsuhiro; Hayashi, Nobuhiko

    2001-01-01

    The methods how diagnostics data are treated as the surface quantity of magnetic surface and processed to the profile data in the JT-60U plasmas are summarized. The MHD equilibrium obtained by solving Grad-Shafranov equation on the MHD equilibrium calculation and registration software FBEQU are saved shot by shot as a database. Various experimental plasma data measured at various geometrical positions on JT-60 are mapped onto the MHD equilibrium and treated as functions of the volume averaged minor radius ρ on the experimental data time slice monitoring software SLICE. Experimental data are integrated and edited on SLICE. The experimental data measured as the line integral values are transformed by Able inversion. The mapped data are fitted to a functional form and saved to the profile database MAP-DB. SLICE can also read data from MAP-DB and redisplay and transform them. In addition, SLICE can generate the profile data TOKRD as run data for orbit following Monte-Carlo (OFMC) code, analyzer for current drive consistent with MHD equilibrium (ACCOME) code and tokamak predictive and interpretive code system (TOPICS). (author)

  17. Improvement of JT-60U Negative Ion Source Performance

    International Nuclear Information System (INIS)

    Grisham, L.R.; Kuriyama, M.; Kawai, M.; Itoh, T.; Umeda, N.

    2000-01-01

    The negative ion neutral beam system now operating on JT-60U was the first application of negative ion technology to the production of beams of high current and power for conversion to neutral beams, and has successfully demonstrated the feasibility of negative ion beam heating systems for ITER and future tokamak reactors [1, 2]. It also demonstrated significant electron heating[3] and high current drive efficiency in JT-60U[4]. Because this was such a large advance in the state of the art with respect to all system parameters, many new physical processes appeared during the earlier phases of the beam injection experiments. We have explored the physical mechanisms responsible for these processes, and implemented solutions for some of them, in particular excessive beam stripping, the secular dependence of the arc and beam parameters, and nonuniformity of the plasma illuminating the beam extraction grid. This has reduced the percentage of beam heat loading on the downstream grids by roug hly a third, and permitted longer beam pulses at higher powers. Progress is being made in improving the negative ion current density, and in coping with the sensitivity of the cesium in the ion sources to oxidation by tiny air or water leaks, and the cathode operation is being altered

  18. Design of JT-60SA magnets and associated experimental validations

    International Nuclear Information System (INIS)

    Zani, L.; Barabaschi, P.; Peyrot, M.; Meunier, L.; Tomarchio, V.; Duglue, D.; Decool, P.; Torre, A.; Marechal, J.L.; Della Corte, A.; Di Zenobio, A.; Muzzi, L.; Cucchiaro, A.; Turtu, S.; Ishida, S.; Yoshida, K.; Tsuchiya, K.; Kizu, K.; Murakami, H.

    2011-01-01

    In the framework of the JT-60SA project, aiming at upgrading the present JT-60U tokamak toward a fully superconducting configuration, the detailed design phase led to adopt for the three main magnet systems a brand new design. Europe (EU) is expected to provide to Japan (JA) the totality of the toroidal field (TF) magnet system, while JA will provide both Equilibrium field (EF) and Central Solenoid (CS) systems. All magnet designs were optimized trough the past years and entered in parallel into extensive experimentally-based phases of concept validation, which came to maturation in the years 2009 and 2010. For this, all magnet systems were investigated by mean of dedicated samples, e.g. conductor and joint samples designed, manufactured and tested at full scale in ad hoc facilities either in EU or in JA. The present paper, after an overall description of magnet systems layouts, presents in a general approach the different experimental campaigns dedicated to qualification design and manufacture processes of either coils, conductors and electrical joints. The main results with the associated analyses are shown and the main conclusions presented, especially regarding their contribution to consolidate the triggering of magnet mass production. The status of respective manufacturing stages in EU and in JA are also evoked. (authors)

  19. Retention characteristics of hydrogen isotopes in JT-60U

    International Nuclear Information System (INIS)

    Masaki, K.; Sugiyama, K.; Hayashi, T.; Ochiai, K.; Gotoh, Y.; Shibahara, T.; Hirohata, Y.; Oya, Y.; Miya, N.; Tanabe, T.

    2005-01-01

    Erosion/deposition distribution and hydrogen isotope behavior in the JT-60U plasma-facing wall were investigated. Distribution of the tritium, which was produced by D-D nuclear reaction, was not correlated with erosion/deposition distribution. The tritium distribution can be explained by the distribution of high-energy tritium ion-implantation due to ripple loss. Deuterium distribution in the divertor region was different from the tritium distribution and not well correlated with the deposition. The highest D/C was ∼0.05 at the bottom of the outer dome wing, which is much less than that observed in other tokamaks. For the deuterium retention, at least two retention processes (ion-implantation and co-deposition) were found on the dome region. The systematic dust collection gave the small amount of dust (∼7 g: 0.2 mg/s production) in the whole vessel of JT-60U. Deposition was observed at the remote area of the outer divertor region

  20. The signed Roman domatic number of a digraph

    Directory of Open Access Journals (Sweden)

    Seyed Mahmoud Sheikholeslami

    2015-03-01

    Full Text Available Let $D$ be a finite and simple digraph with vertex set $V(D$.A {\\em signed Roman dominating function} on the digraph $D$ isa function  $f:V (D\\longrightarrow \\{-1, 1, 2\\}$ such that$\\sum_{u\\in N^-[v]}f(u\\ge 1$ for every $v\\in V(D$, where $N^-[v]$ consists of $v$ andall inner neighbors of $v$, and every vertex $u\\in V(D$ for which $f(u=-1$ has an innerneighbor $v$ for which $f(v=2$. A set $\\{f_1,f_2,\\ldots,f_d\\}$ of distinct signedRoman dominating functions on $D$ with the property that $\\sum_{i=1}^df_i(v\\le 1$ for each$v\\in V(D$, is called a {\\em signed Roman dominating family} (of functions on $D$. The maximumnumber of functions in a signed Roman dominating family on $D$ is the {\\em signed Roman domaticnumber} of $D$, denoted by $d_{sR}(D$. In this paper we initiate the study of signed Romandomatic number in digraphs and we present some sharp bounds for $d_{sR}(D$. In addition, wedetermine the signed Roman domatic number of some digraphs.  Some of our results are extensionsof well-known properties of the signed Roman domatic number of graphs.

  1. An algorithm for merging part nodes of JT models exported by FORAN

    Directory of Open Access Journals (Sweden)

    FANG Xiongbing

    2017-05-01

    Full Text Available Many cognominal parts exist in JT models exported by FORAN V70 R2.0 software, and this leads to an increase in time consumption and the space analysis results becoming hard to process when using clearance analysis software to perform distance computing for such JT models. Aiming at this problem, an algorithm for merging component nodes is put forward based on investigating the assembly configuration and inherent information (i.e. geometric and material information of JT models created by FORAN. The method is composed of four steps:coordinate transformation, model node renaming, node geometric data transferring and material attribute processing. Finally, the proposed method is implemented by C++ and JT Open Toolkit. The results show that the new JT models generated by the proposed method are comprised of only one assembly node, and they preserve the intrinsic information of the original JT models. Its validity is illustrated by a great deal of examples, and the content of the worked JT models are reduced by about 7% to 20%.

  2. Divorce by consent in Roman law and contemporary law

    OpenAIRE

    Ignjatović Marija; Kitanović Tanja

    2013-01-01

    The subject matter of this paper is divorce by mutual consent in Roman law and contemporary law. In the first part of this article, the authors analyzes the key tenets of consensual divorce in Roman law, with specific reference to the impact of Christian religious teaching on the concepts of marriage and divorce as well as on the Roman rulers' constitutions, which marked the beginning of the process of restricting the right to divorce. In the central part of the paper, the authors examines th...

  3. Maximum β limited by ideal MHD ballooning instabilites in JT-60

    International Nuclear Information System (INIS)

    Seki, Shogo; Azumi, Masashi

    1986-03-01

    Maximum β limited by ideal MHD ballooning instabilities is investigated on divertor configurations in JT-60. Maximum β against ballooning modes in JT-60 has strong dependecy on the distribution of the safety factor over the magnetic surfaces. Maximum β is ∼ 2 % for q 0 = 1.0, while more than 3 % for q 0 = 1.5. These results suggest that the profile control of the safety factor, especially on the magnetic axis, is attractive to the higher β operation in JT-60. (author)

  4. Contextualizing the sacred in the Hellenistic and Roman Near East

    DEFF Research Database (Denmark)

    The study of religion and religious identities in the Hellenistic and Roman Near East has been a focus within archaeology and ancient history for centuries. Yet the transition between the Hellenistic and Roman period remains difficult to grasp from the archaeological and epigraphic evidence....... This volume brings together contributions by leading scholars working on religious identity and religion in the Hellenistic and Roman periods in the Roman Near East. For this volume they have been asked to address a variety of questions concerning religion, religious development, and religious identities from...... literary tradition, but when seen through the lens of contextualization, the material and textual evidence brings forward new narratives about the great variations in worship, myths, and identities, as well as the different religious systems of the region and of the people inhabiting it. The contributions...

  5. Kerttu Wagner. Die historischen romane von Jaan Kross / Wolfgang Drechsler

    Index Scriptorium Estoniae

    Drechsler, Wolfgang, 1963-

    2001-01-01

    Arvustus: Wagner, Kerttu. Die historischen Romane von Jaan Kross : am Beispiel einer Untersuchung der deutschen und englischen Übersetzungen von "Professor Martensi ärasõit" (1984). Frankfurt am Main [etc.] : P. Lang, 2001.

  6. Nets, Boats and Fishing in the Roman World

    DEFF Research Database (Denmark)

    Bekker-Nielsen, Tønnes

    2002-01-01

    Ithas been claimed that in Roman times, net fishing was a shore-based technology, but a study of literary sources and pictorial evidence, mainly mosaics, show that net fishing from boats was widespread throughout the first four centuries AD....

  7. Divorce by consent in Roman law and contemporary law

    Directory of Open Access Journals (Sweden)

    Ignjatović Marija

    2013-01-01

    Full Text Available The subject matter of this paper is divorce by mutual consent in Roman law and contemporary law. In the first part of this article, the authors analyzes the key tenets of consensual divorce in Roman law, with specific reference to the impact of Christian religious teaching on the concepts of marriage and divorce as well as on the Roman rulers' constitutions, which marked the beginning of the process of restricting the right to divorce. In the central part of the paper, the authors examines the regulation on the consensual divorce in some contemporary legal systems. In addition, the authors provides a substantial analysis of the normative framework on the termination of marriage in the positive Serbian legislation. In the final part of the paper, the authors provides a comparative analysis and underscores the observed similarities and differenced in the regulation of the institute of consensual divorce in Roman law and in the contemporary legislation.

  8. Trade and Transport in Late Roman Syria

    Science.gov (United States)

    Fletcher, Christopher

    Despite the relative notoriety and miraculous level of preservation of the Dead Cities of Syria, fundamental questions of economic and subsistence viability remain unanswered. In the 1950s Georges Tchalenko theorized that these sites relied on intensive olive monoculture to mass export olive oil to urban centers. Later excavations discovered widespread cultivation of grains, fruit, and beans which directly contradicted Tchalenko's assertion of sole reliance on oleoculture. However, innumerable olive presses in and around the Dead Cities still speak to a strong tradition of olive production. This thesis tests the logistical viability of olive oil transportation from the Dead Cities to the distant urban centers of Antioch and Apamea. Utilization of Raster GIS and remote sensing data allows for the reconstruction of the physical and social landscapes of Late Roman Syria. Least Cost Analysis techniques produce a quantitative and testable model with which to simulate and evaluate the viability of long distance olive oil trade. This model not only provides a clearer understanding of the nature of long distance trade relationships in Syria, but also provides a model for investigating ancient economic systems elsewhere in the world. Furthermore, this project allows for the generation of new information regarding sites that are currently inaccessible to researchers.

  9. High coupling performance of JT-60U ICRF antennas

    International Nuclear Information System (INIS)

    Saigusa, M.; Moriyama, S.; Fujii, T.; Kimura, H.; Sato, M.; Hosogane, N.; Nemoto, M.; Yamamoto, T.

    1994-01-01

    Sufficient coupling of an ICRF antenna for high power experiments was obtained even for a wide gap between the separatrix and the antenna in JT-60U. The loading resistances for an out-of-phase mode are over 4 Ω for a gap of 13 cm between the separatrix and the Faraday shield over the wide range of electron density from 1 x 10 19 to 5.5 x 10 19 m -3 . In particular, the loading resistances for an in-phase mode are about 5 Ω for a gap of 33 cm between the separatrix and the Faraday shield for the same plasma parameters. However, the heating response for the out-of phase mode is much stronger than that for the in-phase mode. (author). Letter-to-the-editor. 11 refs, 6 figs

  10. The plasma movie database system for JT-60

    International Nuclear Information System (INIS)

    Sueoka, Michiharu; Kawamata, Yoichi; Kurihara, Kenichi; Seki, Akiyuki

    2007-01-01

    The real-time plasma movie with the computer graphics (CG) of plasma shape is one of the most effective methods to know what discharge have been made in the experiment. For an easy use of the movie in the data analysis, we have developed the plasma movie database system (PMDS), which automatically records plasma movie according to the JT-60 discharge sequence, and transfers the movie files on request from the web site. The file is compressed to about 8 MB/shot small enough to be transferred within a few seconds through local area network (LAN). In this report, we describe the developed system from the technical point of view, and discuss a future plan on the basis of advancing video technology

  11. Mechanical properties of JT-60 tokamak machine in power tests

    International Nuclear Information System (INIS)

    Takatsu, Hideyuki; Ohkubo, Minoru; Yamamoto, Masahiro; Ohta, Mitsuru

    1986-01-01

    JT-60 power tests were carried out from Dec. 10, 1984 to Feb. 20, 1985 to demonstrate, in advance of actual plasma operation, satisfactory performance of tokamak machine, power suppliers and control system in combination. The tests began with low power test of individual coil systems and progressed to full power tests. The coil current was raised step by step, monitoring the mechanical, thermal, electrical and vacuum data. Power tests were concluded with successful results. All of the coil systems were raised up to full power operation in combination and system performance was verified including the structural integrity of tokamak machine. Measured strain and deflection showed good agreements with those predicted in the design, which was an evidence that electromagnetic forces were supported as expected in the design. A few limitations to machine operation was made clear quantitatively. And it was found that existing detectors were insufficient to monitor machine integrity and two kinds of detector were proposed to be installed. (author)

  12. JT-60SA vacuum vessel manufacturing and assembly

    Energy Technology Data Exchange (ETDEWEB)

    Masaki, Kei, E-mail: masaki.kei@jaea.go.jp [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Shibama, Yusuke K.; Sakurai, Shinji; Shibanuma, Kiyoshi; Sakasai, Akira [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan)

    2012-08-15

    Highlights: Black-Right-Pointing-Pointer The design of the JT-60SA vacuum vessel body was completed with the demonstration of manufacturing procedure by the mock-up fabrication of the 20 Degree-Sign upper half of VV. Black-Right-Pointing-Pointer The actual VV manufacturing has started since November 2009. Black-Right-Pointing-Pointer The first product of the VV 40 Degree-Sign sector was completed in May 2011. Black-Right-Pointing-Pointer A basic VV assembly scenario and procedure were studied to complete the 360 Degree-Sign VV including positioning method and joint welding. - Abstract: The JT-60SA vacuum vessel (VV) has a D-shaped poloidal cross section and a toroidal configuration with 10 Degree-Sign segmented facets. A double wall structure is adopted to ensure high rigidity at operational load and high toroidal one-turn resistance. The material is 316L stainless steel with low cobalt content (<0.05%). The design temperatures of the VV at plasma operation and baking are 50 Degree-Sign C and 200 Degree-Sign C, respectively. In the double wall, boric-acid water is circulated at plasma operation to reduce the nuclear heating of the superconducting magnets. For baking, nitrogen gas is circulated in the double wall after draining of the boric-acid water. The manufacturing of the VV started in November 2009 after a fundamental welding R and D and a trial manufacturing of 20 Degree-Sign upper half mock-up. The manufacturing of the first VV 40 Degree-Sign sector was completed in May 2011. A basic concept and required jigs of the VV assembly were studied. This paper describes the design and manufacturing of the vacuum vessel. A plan of VV assembly in torus hall is also presented.

  13. Heat analysis of the magnetic limiter plate for JT-60

    International Nuclear Information System (INIS)

    Nakamura, Hiroo; Ninomiya, Hiromasa; Shimizu, Masatsugu; Ohta, Mitsuru

    1977-03-01

    Heat analysis has been made of the magnetic limiter plate for JT-60. Test materials of the magnetic limiter plate are molybdenum, graphite, pyrolytic graphite and silicon carbide. It is assumed in calculation of the heat analysis that 10MW is deposited on the 2 cm wide surface of the magnetic limiter plate in about 10 sec. The magnetic limiter plate of pyrolytic graphite is a stack of pyrolytic graphite sheets, heat input is in the deposition plane to take advantage of the large heat conductivity along this plane. Pyrolytic graphite is the best in terms of temperature rise. The temperature of molybdenum and graphite rise up to 1800 0 C and 620 0 C, respectively, in an deposition of 10 MWx10sec. Silicon carbide is not suitable for the magnetic limiter plate. Because the plasma of the JT-60 discharges every 10 min, the average heat flux decreases to 17 w/cm 2 during the each interval. When the magnetic limiter plate has the above heat inflow, a maximum of above 1000 0 C occurs at the edge far from the joint to the thick ring of the vacuum vessel. To reduce heat load of the magnetic limiter plate, an alternating current (2 -- 5Hz) is superposed on the magnetic limiter coil current. The intersection of separatrix line and magnetic limiter plate then moves cyclically more than 10 cm. Concerning temperature distribution of the multi-groove magnetic limiter plate, its dimensions are determined by the limitation in vapor pressure to prevent the impurity inflow. (auth.)

  14. Advanced tokamak research with integrated modeling in JT-60 Upgrade

    International Nuclear Information System (INIS)

    Hayashi, N.

    2010-01-01

    Researches on advanced tokamak (AT) have progressed with integrated modeling in JT-60 Upgrade [N. Oyama et al., Nucl. Fusion 49, 104007 (2009)]. Based on JT-60U experimental analyses and first principle simulations, new models were developed and integrated into core, rotation, edge/pedestal, and scrape-off-layer (SOL)/divertor codes. The integrated models clarified complex and autonomous features in AT. An integrated core model was implemented to take account of an anomalous radial transport of alpha particles caused by Alfven eigenmodes. It showed the reduction in the fusion gain by the anomalous radial transport and further escape of alpha particles. Integrated rotation model showed mechanisms of rotation driven by the magnetic-field-ripple loss of fast ions and the charge separation due to fast-ion drift. An inward pinch model of high-Z impurity due to the atomic process was developed and indicated that the pinch velocity increases with the toroidal rotation. Integrated edge/pedestal model clarified causes of collisionality dependence of energy loss due to the edge localized mode and the enhancement of energy loss by steepening a core pressure gradient just inside the pedestal top. An ideal magnetohydrodynamics stability code was developed to take account of toroidal rotation and clarified a destabilizing effect of rotation on the pedestal. Integrated SOL/divertor model clarified a mechanism of X-point multifaceted asymmetric radiation from edge. A model of the SOL flow driven by core particle orbits which partially enter the SOL was developed by introducing the ion-orbit-induced flow to fluid equations.

  15. Long Pulse Operation on NBI Systems for JT-60U

    International Nuclear Information System (INIS)

    Akino, N.; Ebisawa, N.; Honda, A.; Ikeda, Y.; Kawai, M.; Kazawa, M.; Mogaki, K.; Ohga, T.; Umeda, N.; Usui, K.; Yamamoto, T.; Grisham, L.

    2005-01-01

    In the neutral beam injection (NBI) system, an extension of the pulse duration up to 30 sec has been intended to study quasi-steady state plasma on JT-60U. The four positive-ion based (P-NBI) units, which tangentially inject neutral beam to plasma, were mainly modified on the electric power supplies and the beam limiters to extend the pulse duration up to 30 sec with 2 MW at 80 keV per each. The seven P-NBI units, each of which perpendicularly injects for 10 sec, were conducted to operate in series for the total pulse duration of 30 sec. The ion source of the negative-ion based (N-NBI) unit, whose target beam energy is 500 keV for 10 sec, was also modified to reduce the heat load of the grid for long pulse operation. The reduction of the re-ionization of the neutral beam in the beam drift duct was a key to achieve a long pulse injection. It was found that the pressure rise in the beam drift duct, which gives the re-ionization rate, depended on the temperature of the re-ionization plates during NBI injection. Up to now, it was attained successfully that the pulse duration of the tangential P-NBI unit was extended up to 30 sec. 310 MJ of the total integrated injection energy into JT-60U plasma was achieved, including the negative-ion based NBI operation for 17 sec at 366 keV

  16. Developmental prototype for replacement of JT-60 timing system

    International Nuclear Information System (INIS)

    Akasaka, H.; Kawamata, Y.; Yonekawa, I.

    2004-01-01

    The present CAMAC based timing system has been used for synchronizing sequential events of the discharge and the data collection of the interesting JT-60U experiment plasma phenomena. However, a more flexible and sophisticated state-of-the-art timing system now is required to realize advanced plasma control with minimal maintenance costs. In this context, the versa module Europe (VME-bus) system with a high-speed data communication network using reflective memory (RM) modules and user-friendly application software based on MATLAB TM tools has been selected to develop the new prototype timing system. In the ZENKEI, the supervisory control system of the JT-60, the supervisory timing system provides the 50-μs master clock pulses, the various timing signal preparation logic, which is built into the digital signal processing (DSP) module in conjunction with the discharge sequence event signals, and the 6.2 MB/s high-speed communication data link provided by the RM module. Except the clock pulse generator (CPG) module, no other special timing module is necessary for this new timing system. The timing signal is prepared by software logic in conjunction with sequential events and the preset timer, is transferred to the subsystems through the RM module, where it is synchronized to the 50-μs clock pulses. The timing system of the subsystems also consists of hardware similar in structure to the ZENKEI timing system. The fundamental timing system configuration, the necessary functions, and the preliminary test results of the prototype system are reported in this presentation

  17. Weight Estimate and Centers of Gravity for JT-11 Nuclear Conversion Study

    International Nuclear Information System (INIS)

    Manning, R. W.

    1958-01-01

    Weight estimates and centers of gravity for the JT-11 nuclear conversion study are tabulated. Included in the radiator section are: diffuser, shrouds, supports, radiator, liquid metal, shafting and casing.

  18. Combined Brayton-JT cycles with refrigerants for natural gas liquefaction

    Science.gov (United States)

    Chang, Ho-Myung; Park, Jae Hoon; Lee, Sanggyu; Choe, Kun Hyung

    2012-06-01

    Thermodynamic cycles for natural gas liquefaction with single-component refrigerants are investigated under a governmental project in Korea, aiming at new processes to meet the requirements on high efficiency, large capacity, and simple equipment. Based upon the optimization theory recently published by the present authors, it is proposed to replace the methane-JT cycle in conventional cascade process with a nitrogen-Brayton cycle. A variety of systems to combine nitrogen-Brayton, ethane-JT and propane-JT cycles are simulated with Aspen HYSYS and quantitatively compared in terms of thermodynamic efficiency, flow rate of refrigerants, and estimated size of heat exchangers. A specific Brayton-JT cycle is suggested with detailed thermodynamic data for further process development. The suggested cycle is expected to be more efficient and simpler than the existing cascade process, while still taking advantage of easy and robust operation with single-component refrigerants.

  19. Development of fast opening magnetic valve for JT-60 pellet injector

    International Nuclear Information System (INIS)

    Hiratsuka, Hajime; Kawasaki, Kouzo; Takatsu, Hideyuki; Miyo, Yasuhiko; Yoshioka, Yuji; Ohta, Kazuya; Shimizu, Masatsugu; Onozuka, Masanori; Uchikawa, Takashi; Iwamoto, Syuichi; Hashiri, Noboru

    1989-01-01

    A pneumatic four-pellet injector (JT-60 pellet injector) has been constructed for JT-60 in May, 1988. A fast opening magnetically driven propellant gas injection valve has been developed for JT-60 pellet injector. This valve can accelerate four cylindrical pellets, two 3.8 mm diameter by 3.8 mm and two 2.7 mm diameter by 2.7 mm, to greater than 1.6 km/s with propellent gas of up to 50 bar. It is now successfully in use in JT-60, contributing to plasma studies. In this paper the outline of a newly developed fast opening magnetic valve and the results of performance tests are presented. (author). 6 figs.; 1 tab

  20. Comparison of transient electron heat transport in LHD helical and JT-60U tokamak plasmas

    International Nuclear Information System (INIS)

    Inagaki, S.; Ida, K.; Tamura, N.; Shimozuma, T.; Kubo, S.; Nagayama, Y.; Kawahata, K.; Sudo, S.; Ohkubo, K.; Takenaga, H.; Isayama, A.; Takizuka, T.; Kamada, Y.; Miura, Y.

    2005-01-01

    Transient transport experiments are performed in plasmas with and without Internal Transport Barrier (ITB) on LHD and JT-60U. The dependence of χ e on electron temperature, T e , and electron temperature gradient, ∇T e , is analyzed by an empirical non-linear heat transport model. In plasmas without ITB, two different types of non-linearity of the electron heat transport are observed from cold/heat pulse propagation. The χ e depends on T e and ∇T e in JT-60U, while the ∇T e dependence is weak in LHD. Inside the ITB region, there is no or weak ∇T e dependence both in LHD and JT-60U. A cold pulse growing driven by the negative T e dependence of χ e is observed inside the ITB region (LHD) and near the boundary of the ITB region (JT-60U). (author)

  1. 2. Interferometry and polarimetry. 2.3. Polarimetry on JT-60U

    International Nuclear Information System (INIS)

    Kawano, Yasunori

    2000-01-01

    In order to establish an electron density measurement method with high reliability and stability for magnetic-confinement fusion devices, studies on infrared polarimetry have been carried out in JT-60U. Electron density measurement based on tangential Faraday rotation has been verified using a CO 2 laser polarimeter developed for JT-60U. In this article, basic ideas of studies, results from polarimetry experiments, and suggestions for future devices are presented. (author)

  2. Design and Structural Analysis for the Vacuum Vessel of Superconducting Tokamak JT-60SC

    International Nuclear Information System (INIS)

    Kudo, Y.; Sakurai, S.; Masaki, K.; Urata, K.; Sasajima, T.; Matsukawa, M.; Sakasai, A.; Ishida, S.

    2003-01-01

    A modification of the JT-60 is planned to be a superconducting tokamak (JT-60SC) in order to establish steady-state operation of high beta plasma for 100 s, and to ensure the applicability of ferritic steel as a reduced activation material for reactor relevant break-even class plasmas. This paper describes the detailed design of the vacuum vessel, which has a unique structure for cost effective manufacturing, as well as structural analysis results for a feasibility study

  3. QT and JT dispersion and cardiac performance in children with neonatal Bartter syndrome: a pilot study.

    Science.gov (United States)

    Hacihamdioglu, Duygu Ovunc; Fidanci, Kursat; Kilic, Ayhan; Gok, Faysal; Topaloglu, Rezan

    2013-10-01

    QT dispersion and JT dispersion are simple noninvasive arrhythmogenic markers that can be used to assess the homogeneity of cardiac repolarization. The aim of this study was to assess QT and JT dispersion and their relation with left ventricular systolic and diastolic functions in children with Bartter syndrome (BS). Nine neonatal patients with BS (median age 9.7 years) and 20 controls (median age 8 years) were investigated at rest. Both study and control subjects underwent electrocardiography (ECG) in which the interval between two R waves and QT intervals, corrected QT, QT dispersion, corrected QT dispersion, JT, corrected JT, JT dispersion and corrected JT dispersion were measured with 12-lead ECG. Two-dimensional, Doppler echocardiographic examinations were performed. Patients and controls did not differ for gender and for serum levels of potassium, magnesium, and calcium (p > 0.05). Both study and control subjects had normal echocardiographic examination and baseline myocardial performance indexes. The QT dispersion and JT dispersion were significantly prolonged in patients with BS compared to those of the controls {37.5 ms [interquartile range (IQR) 32.5-40] vs. 25.5 ms (IQR 20-30), respectively, p = 0.014 and 37.5 ms (IQR 27.5-40) vs. 22.5 ms (IQR 20-30), respectively, p = 0.003}. Elevated QT and JT dispersion during asymptomatic and normokalemic periods may be risk factors for the development of cardiac complications and arrhythmias in children with BS. In these patients the need for systematic cardiac screening and management protocol is extremely important for effective prevention.

  4. Sewerage system (cloaca in Roman law

    Directory of Open Access Journals (Sweden)

    Aličić Samir

    2012-01-01

    Full Text Available Sewerage system (cloaca, which implies any cavity through which waste water flows, has in Roman law a special legal protection due to its importance for public health preservation and safety of citizens. In Praetorian Edict, two interdicts are envisaged; one prohibitory, by which private sewerage system is protected and one restitutory, by which public sewerage system is protected. It is possible that a restitutory interdict about private sewerage system existed. By the public sewerage interdict, a person who blocks or damages public sewerage is ordered to restore everything to previous state. By the private sewerage interdict, anyone is forbidden to obstruct a person who wants to repair sewerage that leads from his building through neighboring buildings. By lawyers' interpretations, the application of this interdict is expanded to all realty, as well as a situation of building a new sewerage system. Moreover, it is envisaged by Praetorian edict that against a person who builds or repairs sewerage neither interdict uti possidetis can be filed. Similarly, by lawyers' interpretations, application of operis novi nuntiatio is prevented against a person who repairs or cleans sewerage system if interruption of work could cause danger. Law developed in the direction that enabled unobstructed maintenance and building of sewerage system through neighboring realty, especially if danger of effusion existed. The only limitations were comprised in the obligation of compensation of damages to third parties, and in certain obligations of public law character: obligation to obtain consent of magistrate when building a new sewerage and duty to pay sewerage tax (cloacarium.

  5. The design study of the JT-60SU device. No. 4. The vacuum vessel and cryostat of JT-60SU

    International Nuclear Information System (INIS)

    Neyatani, Yuzuru; Ushigusa, Kenkichi; Tobita, Kenji

    1997-03-01

    The vacuum vessel and the cryostat for the JT-60 Super Upgrade (JT-60SU) have been designed. Two types of the complex materials for the vacuum vessel were chosen on the basis of the avoidance of tritium occlusion and the low irradiation, i.e. (1) SUS316 covered by tungsten plate (30mm thickness) as a γ-ray shielding, (2) Ti-6Al-4V alloy covered by SUS430 plate (1mm thickness) as a tritium protector. Selecting the double skin type of vacuum vessel with toroidally continued structure gave the basic design of the vacuum vessel satisfying the design criteria of the vessel strength for the electromagnetic force, heat load and the property of radiation shielding. The characteristics of the SUS316 covered by tungsten plate type is that as the tungsten can shield the γ-ray, the dose rate inside the vacuum vessel during the maintenance can reduce effectively. The advantage of the Ti-6Al-4V alloy covered by SUS430 plate type vacuum vessel is the quick reduction of the radioactive isotope because of no production of the isotopes with long half-life periods. Channel type and vertical type of the divertor were designed. The sector type of toroidally separated structure was selected for the remote handling. The material of the armor plate was not determined because no material endure the high heat load on the divertor. The cryostat composing the dome and the tank was designed. The electromagnetic force by the eddy current, generated at the plasma start up phase and at the quench of CS super-conducting coil, were small compared to the force produced by the stress limit. (author)

  6. Woman in Roman law: Subject or object of the law?

    Directory of Open Access Journals (Sweden)

    Bogunović Mirjana

    2012-01-01

    Full Text Available In Rome, legal status of woman and her factual possibilities of impact on public life were in serious discrepancy. General attitude of the legal status of woman in time of Romans is best shown by Papinian, 'In many provisions of our law, the position of woman is worse than of man (D.9.1.5.'. Every free Roman woman was considered a subject of law, according to classical Roman law. Nevertheless, there were extensive legislations that limited her legal and business capacity. Naturally, woman did not have legal personality in all periods of Roman state and her legal status was adjusted to the factual changes that had occurred in Roman society. What makes her position specific in Rome is progressive social role that did not exist in Greek-Asian world. From these previously mentioned views, which were confronting, it is possible to draw some doubts. Was woman really on the margins of political happenings, or was she an actual actor, even initiator, of some political events?.

  7. Astronomy in towns? An archaeoastronomical approach to the Roman urbanism

    Science.gov (United States)

    Rodríguez-Antón, A.; Belmonte, J. A.; González-García, A. C.

    2017-03-01

    Although the final definition of Archaeoastronomy is still under debate, what is clear is that this discipline offers a different approach to the knowledge of ancient cultures than traditional archaeology has done so far. Archaeoastronomy considers the sky as an inseparabe part of the environment and thus an element of the transformed landscape with highly symbolic content. In the case of the Roman culture, the great colonizing activity involved continuous spatial transformations and the skyscape should be considered as a piece of the created urbanized spaces. For this reason, a number of fieldwork campaigns were conducted in several Roman cities across different regions of the ancient Roman Empire in order to study the configuration of those landscapes and the possible integration of the sky during the buiding processes. At the present, our group has the largest sample of orientations of Roman settlements so far, and here it is shown the preliminary results of an statistical analysis which may offer new answers to the various still open questions in Roman urbanism, often faced from conservative views.

  8. Change in silica sources in Roman and post-Roman glass

    International Nuclear Information System (INIS)

    Aerts, A.; Velde, B.; Janssens, K.; Dijkman, W.

    2003-01-01

    Although Roman and post-Empire glasses found in Europe are reputed to have a very constant composition and hence source of components, it appears that some 4-5th century and later specimens show evidence of a different source of silica (sand) component. Zirconium and titanium are the discriminating elements. Data presented here for 278 specimens from 1st to 4th century German and Belgian samples indicate a strongly homogeneous Zr and Ti content; N: number of analyzed samples while 62 samples from Maastricht show low Zr-Ti contents from 1st to 3rd century samples while 4-5th century samples show a strong trend of concomitant Ti and Zr increase. If the high values of Zr-Ti represent a new source of silica (sand) the trend from low to high content suggests that a significant amount of low Zr-Ti glass was recycled to form these glass objects. Similar high Ti content can be seen in analysis results reported for other but not all 4-5th century samples found in northern Europe while earlier productions show typical low Ti contents. Although the fusing agent for these glasses seems to have always been natron (a mineral deposit in the Nile delta) from Hellenistic times to the 9th century, a change in the silica source, indicated by variation of the Ti and Zr content, could very well reflect the results of political instability of the 4-5th century exemplified by the fragmentation of the Roman Empire into two parts

  9. Change in silica sources in Roman and post-Roman glass

    Energy Technology Data Exchange (ETDEWEB)

    Aerts, A.; Velde, B.; Janssens, K.; Dijkman, W

    2003-04-18

    Although Roman and post-Empire glasses found in Europe are reputed to have a very constant composition and hence source of components, it appears that some 4-5th century and later specimens show evidence of a different source of silica (sand) component. Zirconium and titanium are the discriminating elements. Data presented here for 278 specimens from 1st to 4th century German and Belgian samples indicate a strongly homogeneous Zr and Ti content; N: number of analyzed samples while 62 samples from Maastricht show low Zr-Ti contents from 1st to 3rd century samples while 4-5th century samples show a strong trend of concomitant Ti and Zr increase. If the high values of Zr-Ti represent a new source of silica (sand) the trend from low to high content suggests that a significant amount of low Zr-Ti glass was recycled to form these glass objects. Similar high Ti content can be seen in analysis results reported for other but not all 4-5th century samples found in northern Europe while earlier productions show typical low Ti contents. Although the fusing agent for these glasses seems to have always been natron (a mineral deposit in the Nile delta) from Hellenistic times to the 9th century, a change in the silica source, indicated by variation of the Ti and Zr content, could very well reflect the results of political instability of the 4-5th century exemplified by the fragmentation of the Roman Empire into two parts.

  10. Change in silica sources in Roman and post-Roman glass

    Science.gov (United States)

    Aerts, A.; Velde, B.; Janssens, K.; Dijkman, W.

    2003-04-01

    Although Roman and post-Empire glasses found in Europe are reputed to have a very constant composition and hence source of components, it appears that some 4-5th century and later specimens show evidence of a different source of silica (sand) component. Zirconium and titanium are the discriminating elements. Data presented here for 278 specimens from 1st to 4th century German and Belgian samples indicate a strongly homogeneous Zr and Ti content; N: number of analyzed samples while 62 samples from Maastricht show low Zr-Ti contents from 1st to 3rd century samples while 4-5th century samples show a strong trend of concomitant Ti and Zr increase. If the high values of Zr-Ti represent a new source of silica (sand) the trend from low to high content suggests that a significant amount of low Zr-Ti glass was recycled to form these glass objects. Similar high Ti content can be seen in analysis results reported for other but not all 4-5th century samples found in northern Europe while earlier productions show typical low Ti contents. Although the fusing agent for these glasses seems to have always been natron (a mineral deposit in the Nile delta) from Hellenistic times to the 9th century, a change in the silica source, indicated by variation of the Ti and Zr content, could very well reflect the results of political instability of the 4-5th century exemplified by the fragmentation of the Roman Empire into two parts.

  11. Overview of engineering design, manufacturing and assembly of JT-60SA machine

    Energy Technology Data Exchange (ETDEWEB)

    Di Pietro, Enrico, E-mail: enrico.dipietro@jt60sa.org [JT-60SA EU Home Team, Fusion for Energy, Boltzmannstrasse 2, Garching 85748 (Germany); Barabaschi, Pietro [JT-60SA EU Home Team, Fusion for Energy, Boltzmannstrasse 2, Garching 85748 (Germany); Kamada, Yutaka [JT-60SA JA Home Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Ishida, Shinichi [JT-60SA JA Project Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

    2014-10-15

    The JT-60SA experiment is one of the three projects to be undertaken in Japan as part of the Broader Approach Agreement, conducted jointly by Europe and Japan, and complementing the construction of ITER in Europe. The JT-60SA device is a fully superconducting tokamak capable of confining break-even equivalent deuterium plasmas with equilibria covering high plasma shaping with a low aspect ratio at a maximum plasma current of I{sub p} = 5.5 MA. This makes JT-60SA capable to support and complement ITER in all the major areas of fusion plasma development necessary to decide DEMO reactor construction. After a complex start-up phase due to the necessity to carry out a re-baselining effort with the purpose to fit in the original budget while aiming to retain the machine mission, performance, and experimental flexibility, in 2009 detailed design could start. With the majority of time-critical industrial contracts in place, in 2012, it was possible to establish a credible time plan, and now, the project is progressing on schedule towards the first plasma in March 2019. After careful and focused R and D and qualification tests, the procurement of the major components and plant is now well advanced in manufacturing design and/or fabrication. In the meantime the disassembly of the JT-60U machine has been completed and the engineering of the JT-60SA assembly process has been developed. The actual assembly of JT-60SA started in January 2013 with the installation of the cryostat base. The paper gives an overview of the present status of the engineering design, manufacturing and assembly of the JT-60SA machine.

  12. Accomplishment of JT-60U disassembly work dealing with radioactive components

    International Nuclear Information System (INIS)

    Ikeda, Yoshitaka

    2015-01-01

    The upgrade of the JT-60U to the superconducting tokamak 'JT-60SA' has been carried out to contribute the early realization of fusion energy by addressing key physics issues relevant for ITER and DEMO. Disassembly of the JT-60U tokamak was required so as to newly install the JT-60SA torus at the same position in the torus hall. The JT-60U tokamak was featured by the complicated and welded structure against the strong electromagnetic force, and by the radioactivation due to deuterium-deuterium (D-D) reactions of 1.5x10"2"0 (n) in total. Since this work was the first experience of disassembling a large radioactivated fusion device in Japan, careful preparations of disassembly activities, including treatment of the radioactivated materials and safety work, have been made. About 13,000 components with a total weight of more than 5,400 tonnes were removed from the torus hall and stored safely in storage facilities. All disassembly components were stored with recording the data such as dose rate, weight and kind of material, so as to apply the clearance level regulation in future. It was confirmed that the main radioactive material of the disassembly components was the stainless steel and that its dose rate was almost background level (∼0.1 μSv/h) at ∼10 m far from the vacuum vessel. It seems that the disassembly components with background dose level are in the clearance level. The assembly of JT-60SA tokamak has started in January 2013 after this disassembly of the JT-60U tokamak. (author)

  13. A Directed Network of Greek and Roman Mythology

    OpenAIRE

    Choi, Yeon-Mu; Kim, Hyun-Joo

    2005-01-01

    We study the Greek and Roman mythology using the network theory. We construct a directed network by using a dictionary of Greek and Roman mythology in which the nodes represent the entries listed in the dictionary and we make directional links from an entry to other entries that appear in its explanatory part. We find that this network is clearly not a random network but a directed scale-free network. Also measuring the various quantities which characterize the mythology network, we analyze t...

  14. Tests of a Roman Pot Prototype for the TOTEM Experiment

    OpenAIRE

    Deile, M.; Alagoz, E.; Anelli, G.M.; Antchev, G.A.; Ayache, M.; Caspers, F.; Dimovasili, E.; Dinapoli, R.; Drouhin, F.D.; Eggert, K.; Escourrou, L.; Fochler, O.; Gill, K.; Grabit, R.; Haug, F.

    2005-01-01

    The TOTEM collaboration has developed and tested the first prototype of its Roman Pots to be operated in the LHC. TOTEM Roman Pots contain stacks of 10 silicon detectors with strips oriented in two orthogonal directions. To measure proton scattering angles of a few microradians, the detectors will approach the beam centre to a distance of 10 sigma + 0.5 mm (= 1.3 mm). Dead space near the detector edge is minimised by using two novel "edgeless" detector technologies. The silicon detectors are ...

  15. Comparative investigation of mortars from Roman Colosseum and cistern

    Energy Technology Data Exchange (ETDEWEB)

    Silva, D.A. [Department of Civil and Environmental Engineering, 725 Davis Hall 94720-1710, University of California at Berkeley, Berkeley, CA (United States)]. E-mail: denise@ecv.ufsc.br; Wenk, H.R. [Department of Earth and Planetary Science, 497 McCone 94720-4767, University of California at Berkeley, Berkeley, CA (United States); Monteiro, P.J.M. [Department of Civil and Environmental Engineering, 725 Davis Hall 94720-1710, University of California at Berkeley, Berkeley, CA (United States)

    2005-11-01

    Mortar from the Roman Colosseum and a Roman cistern from Albano Laziale were characterized with optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and thermal analysis (differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)). The different techniques provided consistent results that the mortar of the Colosseum is mainly calcareous lime, while the mortar of the cistern is pozzolanic siliceous material. The study highlights the capabilities of the different methods for the analysis of cement. For routine analysis XRD is adequate but for characterization of poorly crystalline phases FT-IR and TGA have definite advantages.

  16. Comparative investigation of mortars from Roman Colosseum and cistern

    International Nuclear Information System (INIS)

    Silva, D.A.; Wenk, H.R.; Monteiro, P.J.M.

    2005-01-01

    Mortar from the Roman Colosseum and a Roman cistern from Albano Laziale were characterized with optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and thermal analysis (differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)). The different techniques provided consistent results that the mortar of the Colosseum is mainly calcareous lime, while the mortar of the cistern is pozzolanic siliceous material. The study highlights the capabilities of the different methods for the analysis of cement. For routine analysis XRD is adequate but for characterization of poorly crystalline phases FT-IR and TGA have definite advantages

  17. Putting Roman Dams in Context: a Virtual Approach

    Science.gov (United States)

    Decker, M. J.; Du Vernay, J. P.; Mcleod, J. B.

    2017-08-01

    Water resources and management have become a critical global issue. During the half-millennium of its existence, the Roman Empire developed numerous strategies to cope with water management, from large-scale urban aqueduct systems, to industrial-scale water mills designed to cope with feeding growing city populations. Roman engineers encountered, adopted, and adapted indigenous hydraulic systems, and left lasting imprints on the landscape of the Mediterranean and temperate Western Europe by employing a range of water technologies. A recent academic study has enabled the identification of remains of and references to seventy-two dams from the Roman era, constructed in Spain between the 1st and 4th century AD. Such unique heritage, without comparisons in the Mediterranean makes Spain an emblematic case study for the analysis of Roman hydraulic engineering and water management policies. Fifty dams have been located and detailed. The twenty-two outstanding, although identified on the ground, have not been able to be acceptably characterized, due in some cases to their being ruins in a highly degraded state, others due to their being masked by repairs and reconstructions subsequent to the Roman era. A good example of such neglected dams is the buttress dam of Consuegra , in Toledo province (Castilla-La Mancha). Dating to the 3rd - 4th century AD, the Dam of Consuegra, on the basin of the Guadiana, with its over 600 metres length and 4,80 metres height, is a remarkable case of Roman engineering mastery. It had a retaining wall upstream, numerous buttresses and perhaps an embankment downstream, of which no remains are left. The application of 3D digital imaging technique to create a high quality virtual model of such monuments has proved to be successful especially for the study of the technological aspects related its construction. The case study of the Roman dam of Muel (Zaragoza) has shown, in fact, as best practices in digital archaeology can provide an original and

  18. Fabrication and tests of EF conductors for JT-60SA

    Energy Technology Data Exchange (ETDEWEB)

    Kizu, Kaname, E-mail: kizu.kaname@jaea.go.jp [Japan Atomic Energy Agency, Naka, Ibaraki 311-0193 (Japan); Kashiwa, Yoshitoshi; Murakami, Haruyuki [Japan Atomic Energy Agency, Naka, Ibaraki 311-0193 (Japan); Obana, Tetsuhiro; Takahata, Kazuya [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Tsuchiya, Katsuhiko; Yoshida, Kiyoshi [Japan Atomic Energy Agency, Naka, Ibaraki 311-0193 (Japan); Hamaguchi, Shinji [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Matsui, Kunihiro [Japan Atomic Energy Agency, Naka, Ibaraki 311-0193 (Japan); Nakamura, Kazuya; Takao, Tomoaki [Sophia University, Tokyo 102-8554 (Japan); Yanagi, Nagato; Imagawa, Shinsaku; Mito, Toshiyuki [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan)

    2011-10-15

    The conductors for plasma equilibrium field (EF) coils of JT-60SA are NbTi cable-in-conduit (CIC) conductor with stainless steel 316L jacket. The production of superconductors for actual EF coils started from February 2010. Nine superconductors with 444 m in length were produced up to July 2010. More than 300 welding of jackets were performed. Six nonconformities were found by inspections as go gauge, visual inspection and X-ray test. In order to shorten the manufacturing time schedule, helium leak test was conducted at once after connecting the long length jacket not just after the welding. The maximum force to pull the cable into jacket was about 7.6 kN on average. The mass flow rates of 9 conductors showed almost same values indicating that there are no blockages in the conductors. The measured current sharing temperature agreed with the expectation values from strand performance indicating that no degradation was caused by production process. The coupling time constants of conductors ranged from 80 to 90 ms which are much smaller than the design value of 200 ms.

  19. JT-60SA TF magnet industrial manufacturing preparation and qualifications

    International Nuclear Information System (INIS)

    Decool, P.; Cloez, H.; Gros, G.; Marechal, J.L.; Torre, A.; Verger, J.M.; Nusbaum, M.; Billotte, G.; Crepel, B.; Bourquard, A.; Davis, S.; Phillips, G.

    2014-01-01

    The general design of the JT-60SA toroidal field system was defined in agreement with all the participants in the project (CEA, ENEA, F4E), the detailed design was issued by the Voluntary Contributors. For the French part including the procurement of 9 of the 18 TF winding packs and their integration in the casings, an industrial contract was signed mid-2011 with Alstom (France). After agreement on manufacturing drawings and QA documentation, the manufacturing process was defined giving the guidelines for the workshop organization and the definition of the required tooling. The critical manufacturing points were identified in the process and, regarding technical requirements, have led to the definition of a set of qualification mockups. They are related to helium inlets, conductor winding and insulation, local conductor bending, electrical joint and terminal areas for the winding pack (WP), as well as winding embedding, case welding, and impregnations for WP integration in the casing. The fabrication processes have been improved and shall be qualified thanks to the manufacture and testing of 12 corresponding mockups. The successful achievement of several key mock-ups gives confidence in the feasibility of the manufacture, and their completion will give the green light to the industrial coils manufacture. (authors)

  20. Radiation losses and global power balance of JT-60 plasmas

    International Nuclear Information System (INIS)

    Nishitani, T.; Itami, K.; Nagashima, K.; Tsuji, S.; Hosogane, N.; Yoshida, H.; Ando, T.; Kubo, H.; Takeuchi, H.

    1990-01-01

    The radiation losses and the global power balance for Ohmic and neutral beam heated plasmas have been investigated in different JT-60 configurations. Discharges with a TiC coated molybdenum wall and with a graphite wall, with limiter, outer and lower X-point configurations have been studied by bolometric measurements, thermocouples and an infrared TV camera. In neutral beam heated outer X-point discharges with a TiC coated molybdenum first wall, the radiation loss of the main plasma was very low (10% of the absorbed power). The radiation loss due to oxygen was dominant in this case. On the contrary, in discharges with TiC coated molybdenum limiters the radiation loss was very high (>60% of the absorbed power). In the discharges with a graphite wall the radiated power from the main plasma was 20-25% for both limiter and lower X-point configurations. In lower X-point discharges the main contributor to the radiation loss was oxygen, whereas in limiter discharges the loss due to carbon was equal to the loss due to oxygen. The radiation loss from the lower X-point divertor increased with increasing electron density of the main plasma. (author). 33 refs, 14 figs, 1 tab

  1. Activation analysis for JT-60U experiments with deuterium gases

    International Nuclear Information System (INIS)

    Miya, Naoyuki

    1993-11-01

    Identification of radionuclides and evaluation of dose rate level have been made on the structural materials of the JT-60U tokamak device. A one-dimensional neutron and gamma-ray transport code ANISN and an induced activation calculation code CINAC are used in this work. Radionuclides of 56 Mn (High-Mn steel toroidal field coil case), 58 Co (Inconel-625 vessel) and 60 Co (SS-316 first wall supporting material) appeared on the structures, which contribute to the dose rate around a vacuum vessel. Cobalt-58 and 60 Co with long half-life time intensely make residual activation in the time of 3 days to 3 months corresponding to the maintenance time after shutdown. The calculated dose rate on the vessel agreed well with the measured data in the first 2 years D-D operations. The one-dimensional code provided a sufficient prediction for the dose rate, although an error due to the toroidal field coil modeling in the calculation is estimated within ∼30%. (author)

  2. Deuterated-decaborane using boronization on JT-60U

    Energy Technology Data Exchange (ETDEWEB)

    Yagyu, Jun-ichi; Arai, Takashi; Kaminaga, Atsushi; Miyata, Katsuyuki [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Arai, Masaru [Kaihatsu Denki Co., Ltd., Tokyo (Japan)

    2001-03-01

    In JT-60U, boronization using hydride-decaborane (B{sub 10}H{sub 14}) vaporization has been conducted for the first wall conditioning. Compared to other discharge cleaning (DC), boronization is claimed to be efficient in reduction of oxygen impurities and hydrogen recycling in plasma. However, there are some problems in reduction of hydrogen included in boron film and stabilization of DC glow discharge during the boronization. To solve these problems, a new boronization method using deuterated-decaborane (B{sub 10}D{sub 14}) was adopted instead of the conventional hydride-decaborane. As a result, hydrogen content in the boron film decreased clearly and discharge conditioning shots, for decreasing hydrogen content in plasmas, after the boronization were reduced to 1/10 in comparison to the conventional process. Furthermore, DC glow discharge became stable, with only helium carrier gas, and it was possible to save 30 hours in maximum of the time necessary to boronization. It is shown that the boronization using deuterated-decaborane is very efficient and effective method for the first wall conditioning. (author)

  3. Characteristics of halo current in JT-60U

    International Nuclear Information System (INIS)

    Neyatani, Y.; Nakamura, Y.; Yoshino, R.; Hatae, T.

    1999-01-01

    Halo currents and their toroidal peaking factor (TPF) have been measured in JT-60U by Rogowski coil type halo current sensors. The electron temperature in the halo region was around 10 eV at 1 ms before the timing of the maximum halo current. The maximum TPF*I h /I p0 was 0.52 in the operational range of I p = 0.7 ∼ 1.8 MA, B T = 2.2 ∼ 3.5 T, including ITER design parameters of κ > 1.6 and q 95 = 3, which was lower than that of the maximum value of ITER data base (0.75). The magnitude of halo currents tended to decrease with the increase in stored energy just before the energy quench and with the line integrated electron density at the time of the maximum halo current. A termination technique in which the current channel remains stationary was useful to avoid halo current generation. Intense neon gas puffing during the VDE was effective for reducing the halo currents. (author)

  4. Characteristics of halo current in JT-60U

    International Nuclear Information System (INIS)

    Neyatani, Y.; Nakamura, Y.; Yoshino, R.; Hatae, T.

    2001-01-01

    Halo currents and their toroidal peaking factor (TPF) have been measured in JT-60U by Rogowski coil type halo current sensors. The electron temperature in the halo region was around 10 eV at 1 ms before the timing of the maximum halo current. The maximum TPF *I h /I p0 was 0.52 in the operational range of I p =0.7∼1.8MA, B T =2.2∼3.5T, including ITER design parameters of κ>1.6 and q 95 =3, which was lower than that of the maximum value of ITER data base (0.75). The magnitude of halo currents tended to decrease with the increase in stored energy just before the energy quench and with the line integrated electron density at the time of the maximum halo current. A termination technique in which the current channel remains stationary was useful to avoid halo current generation. Intense neon gas puffing during the VDE was effective for reducing the halo currents. (author)

  5. Development of the centrifugal pellet injector for JT-60U

    Energy Technology Data Exchange (ETDEWEB)

    Kizu, Kaname; Hiratsuka, Hajime; Ichige, Hisashi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

    2001-03-01

    For core fueling of JT-60U plasmas, a repetitive pellet injector which centrifugally accelerates D{sub 2} cubic pellets using a straight rod has been developed. This centrifugal pellet injector can eject trains of up to 40 cubic pellets at frequencies of 1-10 Hz and velocities of 0.3-1.0 km/s. The average pellet mass is 3.6x10{sup 20} atoms/pellet below 0.7 m/s. Key techniques for the development were a mesh structured acceleration component for removing gas sublimated from the pellet and a funnel with an appropriate angle connected just behind the acceleration chamber for introducing the pellet to plasma without destruction. Using the mesh structured components, the horizontal angular distribution of pellets ejected became narrow, because irregular pellet motion caused by sublimated gas was reduced. To investigate the performance of the injector, pellet injection experiments from the low magnetic field side (LFS) were conducted using ohmic heating plasmas. Central fueling and enhanced fueling rate have been observed. D{alpha} intensity around the divertor region was reduced in a pellet injection plasma compared to gas puffing, indicating low recycling rate was maintained with the pellet injection. (author)

  6. Development of the centrifugal pellet injector for JT-60U

    International Nuclear Information System (INIS)

    Kizu, Kaname; Hiratsuka, Hajime; Ichige, Hisashi

    2001-03-01

    For core fueling of JT-60U plasmas, a repetitive pellet injector which centrifugally accelerates D 2 cubic pellets using a straight rod has been developed. This centrifugal pellet injector can eject trains of up to 40 cubic pellets at frequencies of 1-10 Hz and velocities of 0.3-1.0 km/s. The average pellet mass is 3.6x10 20 atoms/pellet below 0.7 m/s. Key techniques for the development were a mesh structured acceleration component for removing gas sublimated from the pellet and a funnel with an appropriate angle connected just behind the acceleration chamber for introducing the pellet to plasma without destruction. Using the mesh structured components, the horizontal angular distribution of pellets ejected became narrow, because irregular pellet motion caused by sublimated gas was reduced. To investigate the performance of the injector, pellet injection experiments from the low magnetic field side (LFS) were conducted using ohmic heating plasmas. Central fueling and enhanced fueling rate have been observed. Dα intensity around the divertor region was reduced in a pellet injection plasma compared to gas puffing, indicating low recycling rate was maintained with the pellet injection. (author)

  7. Properties of internal transport barrier formation in JT-60U

    International Nuclear Information System (INIS)

    Sakamoto, Yoshiteru; Suzuki, T.; Ide, S.

    2003-01-01

    The dependence of the ion thermal diffusivity (χ i ) on the radial electric field (E r ) shear has been investigated in JT-60U plasmas. In positive magnetic shear (PS) plasmas, χ i in the core region generally increases with the heating power, similar to the L mode at low heating power. However, as a result of the intensive central heating, which is relevant to the enhancement of the E γ shear, a weak internal transport barrier (ITB) is formed, and χ i in the core region starts to decrease. Corresponding to a further increase of the heating power, a strong ITB is formed and χ i is reduced substantially. In the case of reversed magnetic shear (RS) plasmas, on the other hand, no power degradation of χ i is observed in any of heating regimes. The electron thermal diffusivity (χ e ) is strongly correlated with χ i in PS and RS plasmas. There exists a threshold in the effective E γ shear to change the state from a weak to a strong ITB. It is found that the threshold of the effective E γ shear in the case of a PS plasma depends on the poloidal magnetic field at the ITB. There are multiple levels of reduced transport in the strong ITB for RS plasmas. (author)

  8. Properties of internal transport barrier formation in JT-60U

    International Nuclear Information System (INIS)

    Sakamoto, Y.; Suzuki, T.; Ide, S.

    2003-01-01

    The dependence of the ion thermal diffusivity (χ i ) on the radial electric field (E r ) shear has been investigated in JT-60U plasmas. In positive magnetic shear (PS) plasmas, χ i in the core region generally increases with the heating power, similar to the L mode at low heating power. However, as a result of the intensive central heating, which is relevant to the enhancement of the E r shear, a weak internal transport barrier (ITB) is formed, and χ i in the core region starts to decrease. Corresponding to a further increase of the heating power, a strong ITB is formed and χ i is reduced substantially. In the case of reversed magnetic shear (RS) plasmas, on the other hand, no power degradation of χ i is observed in any of the heating regimes. The electron thermal diffusivity (χ e ) is strongly correlated with χ i in PS and RS plasmas. There exists a threshold in the effective E r shear to change the state from a weak to a strong ITB. It is found that the threshold of the effective E r shear in the case of a PS plasma depends on the poloidal magnetic field at the ITB. There are multiple levels of reduced transport in the strong ITB for RS plasmas. (author)

  9. Experimental transport analysis code system in JT-60

    International Nuclear Information System (INIS)

    Hirayama, Toshio; Shimizu, Katsuhiro; Tani, Keiji; Shirai, Hiroshi; Kikuchi, Mitsuru

    1988-03-01

    Transport analysis codes have been developed in order to study confinement properties related to particle and energy balance in ohmically and neutral beam heated plasmas of JT-60. The analysis procedure is divided into three steps as follows: 1) LOOK ; The shape of the plasma boundary is identified with a fast boundary identification code of FBI by using magnetic data, and flux surfaces are calculated with a MHD equilibrium code of SELENE. The diagnostic data are mapped to flux surfaces for neutral beam heating calculation and/or for radial transport analysis. 2) OFMC ; On the basis of transformed data, an orbit following Monte Carlo code of OFMC calculates both profiles of power deposition and particle source of neutral beam injected into a plasma. 3) SCOOP ; In the last stage, a one dimensional transport code of SCOOP solves particle and energy balance for electron and ion, in order to evaluate transport coefficients as well as global parameters such as energy confinement time and the stored energy. The analysis results are provided to a data bank of DARTS that is used to find an overview of important consideration on confinement with a regression analysis code of RAC. (author)

  10. Feedback control of plasma configuration in JT-60

    International Nuclear Information System (INIS)

    Ninomiya, Hiromasa; Kikuchi, Mitsuru; Yoshino, Ryuji; Hosogane, Nobuyuki; Kimura, Toyoaki; Kurihara, Kenichi; Takahashi, Minoru; Hayashi, Kazuo.

    1986-08-01

    Plasma current, plasma position (center of the outermost magnetic surface), decay index n index and width of the divertor throat are feedback controlled by using 5 kinds of poloidal field coils in JT-60. 5 control commands are calculated in a feedback control computer in each 1 msec. These feedback control functions are checked in ohmically heated plasma. The control characteristics of the plasma are well understood by the simplified control analysis and are consistent with the precise matrix transfer function analysis in the frequency domain and the simulation analysis which include the effects of eddy currents, delay time elements and mutual interactions between controllers. The usefulness of these analyses is experimentally confirmed. Each controlled variable is well feedback controlled to the command and the experimentally realized equilibrium configuration is checked by the well calibrated magnetic probes. Fast boundary identification code is used for the identification of the equilibrium and results are consistent with the precalculated plasma equilibria. By using this feedback control system of the plasma configuration and the equilibrium identification method, we have obtained the stable limiter and divertor configuration. The maximum parameters obtained during OH(I) experimental period are plasma current I p = 1.8 MA, the effective safety factor q eff e = 5.7 x 10 19 m -3 (Murakami parameter of 4.5) and the pulse length of 5 ∼ 10 sec. (author)

  11. Development of the plasma movie database system in JT-60

    International Nuclear Information System (INIS)

    Sueoka, Michiharu; Kawamata, Yoichi; Kurihara, Kenichi; Seki, Akiyuki

    2008-03-01

    A plasma movie is generally expected as one of the most efficient methods to know what plasma discharge has been conducted in the experiment. The JT-60 plasma movie is composed of video camera picture looking at a plasma, computer graphics (CG) picture, and magnetic probe signal as a sound channel. In order to use this movie efficiently, we have developed a new system having the following functions: (a) To store a plasma movie in the movie database system automatically combined with the plasma shape CG and the sound according to a discharge sequence. (b) To make a plasma movie is available (downloadable) for experiment data analyses at the Web-site. Especially, this system aimed at minimizing the development cost, and it tried to develop the real-time plasma shape visualization system (RVS) without any operating system (OS) customized for real-time use. As a result, this system succeeded in working under Windows XP. This report deals with the technical details of the plasma movie database system and the real-time plasma shape visualization system. (author)

  12. 75 FR 27972 - Airworthiness Directives; Pratt & Whitney JT8D-9, -9A, -11, -15, -17, and -17R Turbofan Engines

    Science.gov (United States)

    2010-05-19

    ..., MAN- JT8D-2-06 and the Engine Manual Chapter/Section 72-33-21, Inspection 00. Definitions (i) For the... the technical contents of PW JT8D Maintenance Advisory Notice MAN-JT8D-2-06, dated November 20, 2006... Advisory Notice, MAN-JT8D-2-06 and the Engine Manual Chapter/Section 72-33-21, Inspection 00. (g) For...

  13. COUNTERFEITING ROMAN COINS IN THE ROMAN EMPIRE I – III A.D. STUDY ON THE ROMAN PROVINCES OF DACIA AND PANNONIA

    Directory of Open Access Journals (Sweden)

    Razvan Bogdan Gaspar

    2015-12-01

    Full Text Available This paper is based on the study of Roman silver coins, from archaeological sites located in Roman Dacia and Pannonia. Initially centred on the record of hybrid silver coins, the paper expanded its analysis on counterfeit pieces as well in order to fully understand all problems of roman silver coinage from the 1stto the 3rd centuries AD.The new and larger area of research had more than one implications, coin distribution on the studied sites, influx of coin in the province, quantity of recorded counterfeited pieces being just some of them. Thus every situation was discussed in different chapters, first presenting the coins and the laws that protected them, the studied sites and the analyse of the silver coins on these sites, the general and compared situation between the provinces, interpretation of the counterfeited and hybrid pieces and finally, conclusions on the subject.All these tasks have been achieved one step at a time, each archaeological site providing precious data which piled up and was finally pressed in order to present the correct historical situation.

  14. The Gate of Heaven: Revisiting Roman Mithraic Cosmology

    Science.gov (United States)

    Assasi, R.

    2016-01-01

    The definition and origins of Roman Mithraism remain highly problematic and controversial among modern scholars. The majority of research on Roman Mithraism focuses on interpreting the physical evidence because no considerable written narratives or theology from the religion survive. The most important Mithraic artifact is a repeated bull-slaying scene, which leaves no doubt that this figure conveys the core divine message of the cult. There is also another important Mithraic character that seems to be as important as the bull-slayer. This figure is a lion-headed man entwined by a snake. The author suggests that these figures represent the north ecliptic pole and argues for the importance of this astronomical reference in the Mithraic iconography and mythology. The author also demonstrates the possible relation of his proposed astrological model to the geocentric understanding of the axial precession around the ecliptic pole, where the Roman bull-slaying Mithras could be visualized in the form of a Mithraic constellation. This astrological model also is proposed to be the architectural design concept of Roman Mithraeum. The author also points to the core Christian symbols as possible contemporaneous parallels or derivatives of the Mithraic iconography and theology.

  15. Roman sophisticated surface modification methods to manufacture silver counterfeited coins

    Science.gov (United States)

    Ingo, G. M.; Riccucci, C.; Faraldi, F.; Pascucci, M.; Messina, E.; Fierro, G.; Di Carlo, G.

    2017-11-01

    By means of the combined use of X-ray photoelectron spectroscopy (XPS), optical microscopy (OM) and scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS) the surface and subsurface chemical and metallurgical features of silver counterfeited Roman Republican coins are investigated to decipher some aspects of the manufacturing methods and to evaluate the technological ability of the Roman metallurgists to produce thin silver coatings. The results demonstrate that over 2000 ago important advances in the technology of thin layer deposition on metal substrates were attained by Romans. The ancient metallurgists produced counterfeited coins by combining sophisticated micro-plating methods and tailored surface chemical modification based on the mercury-silvering process. The results reveal that Romans were able systematically to chemically and metallurgically manipulate alloys at a micro scale to produce adherent precious metal layers with a uniform thickness up to few micrometers. The results converge to reveal that the production of forgeries was aimed firstly to save expensive metals as much as possible allowing profitable large-scale production at a lower cost. The driving forces could have been a lack of precious metals, an unexpected need to circulate coins for trade and/or a combinations of social, political and economic factors that requested a change in money supply. Finally, some information on corrosion products have been achieved useful to select materials and methods for the conservation of these important witnesses of technology and economy.

  16. Urban Life and Local Politics in Roman Bithynia

    DEFF Research Database (Denmark)

    Bekker-Nielsen, Tønnes

    Most studies of Roman local administration focus on the formal structures of power, as defined by imperial laws, urban institutions and magistracies. This book explores the interplay of formal power with informal factors such as social prejudice, parochialism and personal rivalries in the cities...

  17. Diet, social differentiation and cultural change in Roman Britain

    DEFF Research Database (Denmark)

    Cheung, Christina; Schroeder, Hannes; Hedges, R. E. M.

    2012-01-01

    This study uses stable isotope analyses (d 13 C and d 15 N) of human bone collagen to reconstruct the diet of three Romano-British (first to early fifth century AD) populations from Gloucestershire in South West England. Gloucestershire was an important part of Roman Britain with two major admini...... sensitive, if settlement-specific, indicator of social differentiation and culture change....

  18. Les traductions néerlandaises des romans francophones camerounais

    African Journals Online (AJOL)

    28 mars 2016 ... deuxième s'intitule Der alte Mann und die Medaille. Le paratexte des textes publiés par la collection de Derde Spreker est avant tout didactique et en souligne la valeur documentaire: il importe que le lecteur place correctement le roman dans le contexte sociopolitique d'origine. Ainsi le titre original.

  19. Roman Catholic Church and media in information age

    Directory of Open Access Journals (Sweden)

    Kyyak Maksym Tarasovich

    2013-11-01

    Full Text Available Roman Catholic Church in the modern information age extensively exploits opportunities of traditional and new media. It has always been trying to be a dynamic and successive participant in the global information space. However, the media has become not only the most important attribute of the information society but also one of the most valuable instruments of religious authority.

  20. Diffractive dijet search with Roman pots at CDF

    International Nuclear Information System (INIS)

    Melese, P.L.

    1996-08-01

    We present the results of a search for diffractive dijets produced in p anti p collisions at √s = 1.8 TeV from data collected by the Collider Detector at Fermilab using a Roman pot trigger. The dijet events exhibit additional diffractive characteristics such as rapidity gaps and boosted center-of-mass systems

  1. Roman impact on the landscape near castellum Fectio, The Netherlands

    NARCIS (Netherlands)

    van den Bos, Valerie; Brinkkemper, Otto; Bull, Ian; Engels, Stefan; Hakbijl, Tom; Schepers, Mans; van Dinter, Marieke; van Reenen, Guido; van Geel, Bas

    2014-01-01

    Castellum Fectio was one of the largest fortifications along the Limes, the northern border of the Roman Empire. The castellum, situated 5 km southeast of Utrecht, the Netherlands, was occupied from around the start of our Era to ca. A.D. 260. It was situated along a river bend of the Rhine that was

  2. Acoustics of ancient Greek and Roman theaters in use today

    DEFF Research Database (Denmark)

    Gade, Anders Christian; Angelakis, Konstantinos

    2006-01-01

    In the Mediteranan area a large number of open, ancient Greek and Roman theatres are still today facing a busy schedule of performances including both classical and contemporary works of dance, drama, concerts, and opera. During the EU funded ``Erato'' project and a subsequent master thesis project...

  3. Roman impact on the landscape near castellum Fectio, The Netherlands

    NARCIS (Netherlands)

    van den Bos, V.; Brinkkemper, O.; Bull, I.D.; Engels, S.; Hakbijl, T.; Schepers, M.; Dinter, M.; van Reenen, G.; van Geel, B.

    2014-01-01

    Castellum Fectio was one of the largest fortifications along the Limes, the northern border of the Roman Empire. The castellum, situated 5 km southeast of Utrecht, the Netherlands, was occupied from around the start of our Era to ca. a.d. 260. It was situated along a river bend of the Rhine that was

  4. Ulpian's Appeal to Nature : Roman Law as Universal Law

    NARCIS (Netherlands)

    Brouwer, René

    2015-01-01

    In this paper I argue that against the political and perhaps even religiously motivated background of the Constitutio Antoniniana, in order to further enhance the appeal of Roman law, Ulpian seeks to connect law and nature by using Stoic terminology. However, his usage of this terminology is

  5. Edith Wharton's "Roman Fever": A Rune of History.

    Science.gov (United States)

    Bauer, Dale M.

    1988-01-01

    Asserts that "Roman Fever" responds to a reactionary political climate, demonstrating an anti-reactionary thrust to Edith Wharton's fiction. Argues that Wharton deserves credit for articulating the destructive character of a cultural misogyny that led quickly to what she saw in 1933 as "a world whizzing ... crazily to the…

  6. THE MAP OF ROMAN DACIA IN THE RECENT STUDIES

    Directory of Open Access Journals (Sweden)

    Szabo Csaba

    2014-04-01

    Full Text Available In this paper the author presents the evolution of the cartographic representation of Roman Dacia in the recent studies of archaeology and ancient history, focusing especially on the lacunas and main problems of foreign (non – Romanian maps, appeared in the last decade in the international scholarship.

  7. Interrogating Infanticide/ Child Euthanasia in the Roman Christian ...

    African Journals Online (AJOL)

    The purpose of this paper is an attempt to examine infanticide practices in the Roman Christian era and interrogate infanticide and child euthanasia in the same era. It also attempts to point out infanticide practices in Abuja and makes a distinction between infanticide and child euthanasia in Abuja. The study employed ...

  8. On the acoustics of ancient Greek and Roman theaters.

    Science.gov (United States)

    Farnetani, Andrea; Prodi, Nicola; Pompoli, Roberto

    2008-09-01

    The interplay of architecture and acoustics is remarkable in ancient Greek and Roman theaters. Frequently they are nowadays lively performance spaces and the knowledge of the sound field inside them is still an issue of relevant importance. Even if the transition from Greek to Roman theaters can be described with a great architectural detail, a comprehensive and objective approach to the two types of spaces from the acoustical point of view is available at present only as a computer model study [P. Chourmouziadou and J. Kang, "Acoustic evolution of ancient Greek and Roman theaters," Appl. Acoust. 69, re (2007)]. This work addresses the same topic from the experimental point of view, and its aim is to provide a basis to the acoustical evolution from Greek to Roman theater design. First, by means of in situ and scale model measurements, the most important features of the sound field in ancient theaters are clarified and discussed. Then it has been possible to match quantitatively the role of some remarkable architectural design variables with acoustics, and it is seen how this criterion can be used effectively to define different groups of ancient theaters. Finally some more specific wave phenomena are addressed and discussed.

  9. The ecclesiastical situation of the first generation Roman Christians

    Directory of Open Access Journals (Sweden)

    A. B. du Toit

    1997-12-01

    Full Text Available Forming pan of a trilogy about the first generation Roman Christians, this anicle concentrates on the ecclesiastical aspect. From some scattered and relatively small groups, the numbers of Roman Christians increased markedly in the second half of the first century. According to Romans 16, Jewish Christians played a significant role in the initial period, although Gentile Christians were in the majority. Friction between these groups may have been a problem, but was not Paul's main concern. The Gentile Christians were mainly from a foreign background. Thus the first Christian community had a strongly cosmopolitan character. The plurality of house-churches was mainly due to practical factors, but social differentiation might have played a role. Meetings most probably took place in the ordinary rented apanments of insulae. Romans 16 renders a vivid picture of the leadership activities of Christian women and of Paul's enlightened position in this regard.

  10. Den historiske roman for børn

    DEFF Research Database (Denmark)

    Skyggebjerg, Anna Karlskov

    Bogen indeholder en redegørelse for den historiske roman som børnelitterær genre. Genren diskuteres i et teoretisk, historisk og analytisk perspektiv. Bogen afsluttes med en række principielle didaktiske overvejelser. Bogen er henvendt til alle, der beskæftiger sig professionelt med børnelitteratur...

  11. The Roman Hannibal: Remembering the Enemy in Silius Italicus' Punica

    NARCIS (Netherlands)

    Stocks, C.A.

    2014-01-01

    This book offers a new reading of Hannibal in Silius Italicus' Punica and provides fresh insight into how the Romans remembered their past. Silius Italicus' Punica, the longest surviving epic in Latin literature, has seen a resurgence of interest among scholars in recent years. A celebration of

  12. Injection control development of the JT-60U electron cyclotron heating system

    Energy Technology Data Exchange (ETDEWEB)

    Hiranai, Shinichi; Shinozaki, Shin-ichi; Yokokura, Kenji; Moriyama, Shinichi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Sato, Fumiaki [Nippon Advanced Technology Co., Ltd., Tokai, Ibaraki (Japan); Suzuki, Yasuo [Atomic Energy General Service Co., Ltd., Tokai, Ibaraki (Japan); Ikeda, Yoshitaka [Japan Atomic Energy Research Inst., Kashiwa, Chiba (Japan)

    2003-03-01

    The JT-60U electron cyclotron heating (ECH) System injects a millimeteric wave at 110 GHz into the JT-60 Plasma, and heats the plasma or drives a current locally to enhance the confinement performance of the JT-60 plasma. The system consists of four sets of high power gyrotrons, high voltage power supplies and transmission lines, and two antennas that launch electron cyclotron (EC) beams toward the plasma. The key features of the injection control system are streering of the direction of the EC beam by driving the movable mirror in the antenna, and capability to set any combination of polarization angle and ellipticity by rotating the two grooved mirrors in the polarizers. This report represents the design, fabrication and improvements of the injection control system. (author)

  13. Review of JT-60U experimental results from March to October, 1991

    International Nuclear Information System (INIS)

    1992-06-01

    Experimental results achieved in the initial operation of JT-60U are described in this paper. Experiments of JT-60U were initiated in March 1991, and deuterium experiments started in the middle of July. Multivariable non-interacting control, H-mode experiments, the high-q and high-β p regime with hot ion enhanced confinement, the divertor heat flux, etc. are reported. Achieved values of the first experiment of the JT-60U LHCD in 1991 were P LH = 1.5 MW, driven current I RF = 2MA, current drive efficiency η CD (=n-bar e R p I RF /P LH ) = 0.25 x 10 20 m -2 A/W and current driven product CDP(=n-bar e R p I RF ) = 3 x 10 20 m -2 MA. (J.P.N.)

  14. Pollution reduction technology program for class T4(JT8D) engines

    Science.gov (United States)

    Roberts, R.; Fiorentino, A. J.; Diehl, L. A.

    1977-01-01

    The technology required to develop commercial gas turbine engines with reduced exhaust emissions was demonstrated. Can-annular combustor systems for the JT8D engine family (EPA class T4) were investigated. The JT8D turbofan engine is an axial-flow, dual-spool, moderate-bypass-ratio design. It has a two-stage fan, a four-stage low-pressure compressor driven by a three-stage low-pressure turbine, and a seven-stage high-pressure compressor driven by a single-stage high-pressure turbine. A cross section of the JT8D-17 showing the mechanical configuration is given. Key specifications for this engine are listed.

  15. Development of a VME and CAMAC based data acquisition and transfer system for JT-60 control

    International Nuclear Information System (INIS)

    Totsuka, Toshiyuki

    1993-08-01

    Development of a VME and CAMAC based data acquisition and transfer system for JT-60 Control is reported. The present data acquisition and transfer system in JT-60 control is basically composed of CAMAC devices. Since the system equipped with 16-bit microcomputers was manufactured more than ten years ago, the performance and program development environment of the system are apparently worse than those of modern 32-bit microcomputers. To improve these disadvantages, a new data acquisition and transfer system using VME-based 32-bit microcomputers and CAMAC drivers is under design. Corresponding to this design, a CAMAC handler, which runs on the microcomputer, for the VME based CAMAC driver was newly developed. Moreover, the functions of the driver and data transfer performance of the VME and CAMAC complex system were tested. The test results shown that the VME based microcomputer and CAMAC serial driver can be applied for the fast and reliable acquisition and transfer system for JT-60 control. (author)

  16. Roman Toi kaks suurt armastust : muusika ja Eesti / Elle Puusaag ; foto: V. Sarapuu

    Index Scriptorium Estoniae

    Puusaag, Elle, 1945-2017

    2007-01-01

    Toronto Eesti Maja kristallsaalis toimunud pidulikust õhtust 5. detsembril: maestro Roman Toi mälestusteraamatu esitlusest. Rets. rmt.: Toi, Roman. Kaunimad laulud pühendan sull' : Roman Toi mälestused/toimetaja Tiina Sarv. Toronto : Viljandi : T. Sarv, 2007

  17. Long-pulse hybrid scenario development in JT-60U

    International Nuclear Information System (INIS)

    Oyama, N.; Isayama, A.; Matsunaga, G.; Suzuki, T.; Takenaga, H.; Sakamoto, Y.; Nakano, T.; Kamada, Y.; Ide, S.

    2009-01-01

    The performance and sustained duration of long-pulse discharges for the 'ITER hybrid scenario' have been improved in JT-60U. The modification of power supply systems for three perpendicular neutral beam (NB) injections provides a long period of central NB heating up to 30 s, which is important for keeping the internal transport barrier (ITB). The peaked density profile in the core plasma can be maintained even when the density at the pedestal increased in the latter phase of the discharge due to the increase in the divertor recycling. Then, the peaked pressure profile attributed to the ITB can be kept constant through the discharge with the peaked power deposition profile. In these long-pulse discharges, MHD activity with toroidal mode number n = 1 is observed even when neoclassical tearing modes (NTMs) are suppressed. When the amplitude of the mode in the peripheral region becomes large, the pedestal pressure is degraded. The mode amplitude is sensitive to the toroidal magnetic field (or edge safety factor) and heating power. After the adjustment of the toroidal magnetic field so as to reduce the mode amplitude, a high normalized beta (β N ) of 2.6 and a high thermal confinement enhancement factor (H H98(y,2) > 1) are sustained for 25 s (∼14τ R , where τ R is the current diffusion time) under the ITER relevant small toroidal rotation condition. The peaked pressure profile in low safety factor plasma (safety factor at 95% flux surface q 95 ∼ 3.2) is stable against NTMs up to β N ∼ 3. A high β N H H98(y,2) of 2.6 gives a high G-factor ( β N H H98(y,2) /q 95 2 ) of 0.25 and a peaked pressure profile gives a large bootstrap current fraction (f BS > 0.43).

  18. Atomic and molecular processes in JT-60U divertor plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Takenaga, H.; Shimizu, K.; Itami, K. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

    1997-01-01

    Atomic and molecular data are indispensable for the understanding of the divertor characteristics, because behavior of particles in the divertor plasma is closely related to the atomic and molecular processes. In the divertor configuration, heat and particles escaping from the main plasma flow onto the divertor plate along the magnetic field lines. In the divertor region, helium ash must be effectively exhausted, and radiation must be enhanced for the reduction of the heat load onto the divertor plate. In order to exhaust helium ash effectively, the difference between behavior of neutral hydrogen (including deuterium and tritium) and helium in the divertor plasma should be understood. Radiation from the divertor plasma generally caused by the impurities which produced by the erosion of the divertor plate and/or injected by gas-puffing. Therefore, it is important to understand impurity behavior in the divertor plasma. The ions hitting the divertor plate recycle through the processes of neutralization, reflection, absorption and desorption at the divertor plates and molecular dissociation, charge-exchange reaction and ionization in the divertor plasma. Behavior of hydrogen, helium and impurities in the divertor plasmas can not be understood without the atomic and molecular data. In this report, recent results of the divertor study related to the atomic and molecular processes in JT-60U were summarized. Behavior of neural deuterium and helium was discussed in section 2. In section 3, the comparisons between the modelling of the carbon impurity transport and the measurements of C II and C IV were discussed. In section 4, characteristics of the radiative divertor using Ne puffing were reported. The new diagnostic method for the electron density and temperature in the divertor plasmas using the intensity ratios of He I lines was described in section 5. (author)

  19. Mock-up test results of monoblock-type CFC divertor armor for JT-60SA

    Energy Technology Data Exchange (ETDEWEB)

    Higashijima, S. [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)], E-mail: higashijima.satoru@jaea.go.jp; Sakurai, S.; Suzuki, S.; Yokoyama, K.; Kashiwa, Y.; Masaki, K.; Shibama, Y.K.; Takechi, M.; Shibanuma, K.; Sakasai, A.; Matsukawa, M.; Kikuchi, M. [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

    2009-06-15

    The JT-60 Super Advanced (JT-60SA) tokamak project starts under both the Japanese domestic program and the international program 'Broader Approach'. The maximum heat flux to JT-60SA divertor is estimated to {approx}15 MW/m{sup 2} for 100 s. Japan Atomic Energy Agency (JAEA) has developed a divertor armor facing high heat flux in the engineering R and D for ITER, and it is concluded that monoblock-type CFC divertor armor is promising for JT-60SA. The JT-60SA armor consists of CFC monoblocks, a cooling CuCrZr screw-tube, and a thin oxygen-free high conductivity copper (OFHC-Cu) buffer layer between the CFC monoblock and the screw-tube. CFC/OFHC-Cu and OFHC-Cu/CuCrZr joints are essential for the armor, and these interfaces are brazed. Needed improvements from ITER engineering R and D are good CFC/OFHC-Cu and OFHC-Cu/CuCrZr interfaces and suppression of CFC cracking. For these purposes, metalization inside CFC monoblock is applied, and we confirmed again that the mock-up has heat removal capability in excess of ITER requirement. For optimization of the fabrication method and understanding of the production yield, the mock-ups corresponding to quantity produced in one furnace at the same time is also produced, and the half of the mock-ups could remove 15 MW/m{sup 2} as required. This paper summarizes the recent progress of design and mock-up test results for JT-60SA divertor armor.

  20. Studies on first wall and plasma wall interaction in JT-60

    International Nuclear Information System (INIS)

    Nakamura, Hiroo

    1988-12-01

    This paper describes studies on first wall and plasma wall interaction in JT-60. Main results are as follows; (1) To select JT-60 first wall material, various RandD were done in FY1975 ∼ 1976. Mo was selected as first wall materials of limiters and divertor plates because of its reliability under a high heat flux condition. (2) Development of low-Z material has been done to reduce impurity problem of Mo first wall. As a result, titanium carbide (TiC) was selected as a coating material on the Mo. High heat load testing has been done for TiC coated Mo limiter same as JT-60. This material can survive under the condition of 1 kW/cm 2 x 10 s, expected in JT-60 limiter design. (3) To reduce high heat load on the divertor plate, separatrix swing is proposed. Optimum frequency of the sweeping is evaluated to be 2 Hz in JT-60. For a discharge with heating power of 30 MW and duration time of 10 s, in addition to the separatrix swing, remote radiative cooling in the divertor region is necessary. Moreover, calculations of erosion thickness have been done for stainless steel, Mo, graphite, TiC and silicon caibide under high heat flux during plasma disruption. (4) In divertor experiments in JT-60, divertor functions on particle, heat load and impurity controls have been demonstrated. In elctron density of 6 x 10 19 m -3 , particle fueling rate of 20 MW NB heating (3 Pa m 3 /s) can be exhausted by divertor pumping system. Effectiveness of remote radiative cooling is demonstrated under the condition of 20 MW NB heating power. Also, separatrix swing is demonstrated to reduce heat load on the divertor plate. Total radiation in main plasma is 5 ∼ 10% of total absorbed power. (author) 120 refs

  1. JT-60 configuration parameters for feedback control determined by regression analysis

    Energy Technology Data Exchange (ETDEWEB)

    Matsukawa, Makoto; Hosogane, Nobuyuki; Ninomiya, Hiromasa (Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment)

    1991-12-01

    The stepwise regression procedure was applied to obtain measurement formulas for equilibrium parameters used in the feedback control of JT-60. This procedure automatically selects variables necessary for the measurements, and selects a set of variables which are not likely to be picked up by physical considerations. Regression equations with stable and small multicollinearity were obtained and it was experimentally confirmed that the measurement formulas obtained through this procedure were accurate enough to be applicable to the feedback control of plasma configurations in JT-60. (author).

  2. JT-60 configuration parameters for feedback control determined by regression analysis

    International Nuclear Information System (INIS)

    Matsukawa, Makoto; Hosogane, Nobuyuki; Ninomiya, Hiromasa

    1991-12-01

    The stepwise regression procedure was applied to obtain measurement formulas for equilibrium parameters used in the feedback control of JT-60. This procedure automatically selects variables necessary for the measurements, and selects a set of variables which are not likely to be picked up by physical considerations. Regression equations with stable and small multicollinearity were obtained and it was experimentally confirmed that the measurement formulas obtained through this procedure were accurate enough to be applicable to the feedback control of plasma configurations in JT-60. (author)

  3. Performance of RF power and phase control on JT-60 LHRF heating system

    International Nuclear Information System (INIS)

    Fujii, T.; Ikeda, Y.; Imai, T.; Honda, M.; Kiyono, K.; Maebara, S.; Saigusa, M.; Sakamoto, K.; Sawahata, M.; Seki, M.

    1987-01-01

    The performance of RF power and phase control on the JT-60 LHRFD heating system are presented. The JT-60 LHRF heating system has three units of huge RF source with a total output of 24 MW, each unit consisting of eight amplifier chains. A high power klystron generating 1 MW for 10 s at 2 GHz is used in each chain. Automatic gain control is employed to regulate the output power not only against gain fluctuations in the chain but also against the unstable plasma load without any output circulator for the klystron

  4. Quality control of the software in the JT-60 computer control system

    International Nuclear Information System (INIS)

    Isaji, Nobuaki; Kurihara, Kenichi; Kimura, Toyoaki

    1990-07-01

    The JT-60 Control System should be improved corresponding to the experimental requirements. In order to keep the integrity of the system even in the modification the concept of quality control (QC) was introduced in the software development. What we have done for QC activity are (1) to establish standard procedures of the software development, (2) to develop support tools for grasping the present status of the program structure, and (3) to develop a document system, and a source program management system. This paper reports these QC activities and their problems for the JT-60 control system. (author)

  5. Diagnostic system for passive charge-exchange particle measurements on JT-60

    International Nuclear Information System (INIS)

    Nemoto, Masahiro; Tobita, Kenji; Kusama, Yoshinori; Takeuchi, Hiroshi

    1988-01-01

    In order to measure energy distributions of the charge-exchange neutral particles in the JT-60 experiments, a compact size electrostatic energy analyzer which the measurable energy range is from 1 keV to 100 keV is developed successfully. Compactness of an analyzer is accomplished by setting an accelerator between a gas stripping cell and a deflector of 45deg injection type. The calibration of the analyzer was carried out owing to confirm the capability of energy analysis and stripping efficiency. This analyzer was applied to measure the energy distribution in additionally heated plasmas in JT-60. The usefullness of the analyzer was confirmed. (author)

  6. Estimation of Freezing Point of Hydrocarbon and Hydrofluorocarbon Mixtures for Mixed Refrigerant jt Cryocooler

    Science.gov (United States)

    Hwang, G.; Lee, J.; Jeong, S.

    2010-04-01

    Estimating the freezing point of refrigerant is an essential part in designing an MR JT (Mixed refrigerant Joule-Thomson) cryocooler to prevent itself from clogging and to operate with stability. There were researches on estimating freezing point, but some of them resulted in the wrong prediction of clogging. In this paper, the freezing point of the MR is precisely estimated with caution of clogging. The solubility of HC (hydrocarbon) and HFC (hydrofluorocarbon) mixture components are obtained with their activity coefficients, which represent the molecular interaction among the components. The freezing points of the MR JT cryocooler are systematically investigated in the operating temperature range from 70 K to 90 K.

  7. Study of carbon impurity generation by chemical sputtering in JT-60U

    International Nuclear Information System (INIS)

    Higashijima, S.; Kubo, H.; Sugie, T.; Shimizu, K.; Asakura, N.; Itami, K.; Hosogane, N.; Sakasai, A.; Konoshima, S.; Sakurai, S.; Takenaga, H.

    1997-01-01

    CD/CH-band intensities emitted from hydrocarbon molecules have been measured in the divertor region of JT-60U and the chemical sputtering yield of methane was estimated as a function of the surface temperature and the deuterium ion flux. The chemical sputtering yield increases with the surface temperature and decreases with increasing ion flux density in the L-mode plasmas. The B 4 C converted CFC tiles are installed in JT-60U and it is found that the chemical sputtering of B 4 C converted CFC tiles is suppressed in comparison to normal CFC tiles. (orig.)

  8. Development of the Plasma Movie Database System for JT-60

    International Nuclear Information System (INIS)

    Sueoka, M.; Kawamata, Y.; Kurihara, K.

    2006-01-01

    A plasma movie is generally expected as one of the most efficient methods to know what plasma discharge has been conducted in the experiment. On this motivation we have developed and operated a real-time plasma shape visualization system over ten years. The current plasma movie is composed of (1) video camera picture looking at a plasma, (2) computer graphic (CG) picture, and (3) magnetic probe signal as a sound channel. (1) The plasma video movie is provided by a standard video camera, equipped at the viewing port of the vacuum vessel looking at a plasma poloidal cross section. (2) A plasma shape CG movie is provided by the plasma shape visualization system, which calculates the plasma shape in real-time using the CCS method [Kurihara, K., Fusion Engineering and Design, 51-52, 1049 (2000)]. Thirty snap-shot pictures per second are drawn by the graphic processor. (3) A sound in the movie is a raw signal of magnetic pick up coil. This sound reflects plasma rotation frequency which shows smooth high tone sound seems to mean a good plasma. In order to use this movie efficiently, we have developed a new system having the following functions: (a) To store a plasma movie in the movie database system automatically combined with the plasma shape CG and the sound according to a discharge sequence. (b) To make a plasma movie be available (downloadable) for experiment data analyses at the Web-site. The plasma movie capture system receives the timing signal according to the JT-60 discharge sequence, and starts to record a plasma movie automatically. The movie is stored in a format of MPEG2 in the RAID-disk. In addition, the plasma movie capture system transfers a movie file in a MPEG4 format to the plasma movie web-server at the same time. In response to the user's request the plasma movie web-server transfers a stored movie data immediately. The movie data amount for the MPEG2 format is about 50 Mbyte/shot (65 s discharge), and that for the MPEG4 format is about 7 Mbyte

  9. J.T. van der Kemp and his Critique of the Settler Farmers on the ...

    African Journals Online (AJOL)

    Theoretically, I draw on some insights from works of Michel Foucault, especially with regard to eighteenth and early nineteenth century 'representational thought', where 'idea' and 'object' are directly related. Keywords: J.T. van der Kemp, settler farmers, frontier, patriot, rebellion, slavery, baptism, cruelty, Black Circuit Court ...

  10. Development and Operational Experiences of the JT-60U Tokamak and Power Supplies

    International Nuclear Information System (INIS)

    Hosogane, N.; Ninomiya, H.; Matsukawa, M.; Ando, T.; Neyatani, Y.; Horiike, H.; Sakurai, S.; Masaki, K.; Yamamoto, M.; Kodama, K.; Sasajima, T.; Terakado, T.; Ohmori, S.; Ohmori, Y.; Okano, J.

    2002-01-01

    The design of the JT-60U tokamak, the configuration of the coil power supplies, and the operational experiences gained to date are reviewed. JT-60U is a large tokamak upgraded from the original JT-60 in order to obtain high plasma current, large plasma volume, and highly elongated divertor configurations. All components inside the toroidal magnetic field coils, such as vacuum vessel, poloidal magnetic field coils, divertor, etc., were modified. Various technologies and ideas were introduced to develop these components; for example, a multi-arc double skin wall structure for the vacuum vessel and a functional poloidal magnetic field coil system with taps for obtaining various plasma configurations. Furthermore, boron-carbide coated carbon fiber composite (CFC) tiles were used as divertor tiles to reduce erosion of carbon-base tiles. Later, a semiclosed divertor with pumps, for which cryo-panels originally used for NBI units were converted, was installed in the replacement of the open divertor. These development and operational results provide data for future tokamaks. Major failures experienced in the long operational period of JT-60U, such as water leakage from the toroidal magnetic field coil, fracture of carbon tiles, and breakdown of a filter capacitor, are described. As a maintenance issue for tokamaks using deuterium fueling gas, a method for reducing radiation exposure of in-vessel workers is described

  11. The design study of the JT-60SU device. No.8. Nuclear shielding and safety design

    Energy Technology Data Exchange (ETDEWEB)

    Miya, Naoyuki; Kikuchi, Mitsuru; Ushigusa, Kenkichi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

    1998-03-01

    Results of nuclear shielding design study and safety analysis for the steady-state tokamak device JT-60SU are described. D-T operation (option) for two years is adopted in addition to ten years operation using deuterium. Design work has been done in accordance with general laws for radioisotopes handling in Japan as a guideline of safety evaluation, which is applied to the operation of present JT-60U device. Optimization of the shielding design for the device structure including vacuum vessel has been presented to meet with allowable limits of biological shielding determined in advance. It is shown that JT-60SU can be operated safely in the present JT-60 experimental building. It is planed to use 100g/year of tritium in D-T operation phase. A concept of multiple -barrier system is applied to the facility design to prevent propagation of tritium, in which the torus hall and the tritium removal room provide the tertiary confinement. From the design of atmosphere detritiation system for accidental tritium release, it is shown that tritium concentration level can be reduced to the allowable level after two weeks with reasonable compact size components. Safety assessment related to activation of coolant/air, and atmospheric tritium effluents are discussed. (author)

  12. Design and characteristics of the drive mechanism for movable limiters of JT-60, (1)

    International Nuclear Information System (INIS)

    Takashima, Tetsuo; Morishita, Osamu; Yamamoto, Masahiro; Shimizu, Masatsugu; Ohta, Mitsuru

    1976-10-01

    Two fast-acting movable rail limiters will be installed in a large Tokamak JT-60 being designed in JAERI. The movable limiter consists of a drive mechanism, a vacuum seal, a bearing, and a molybdenum rail limiter. Design of the drive mechanism for the movable limiter and experimental results on the driving characteristics in full scale are described. (auth.)

  13. Core transport properties in JT-60U and JET identity plasmas

    NARCIS (Netherlands)

    Litaudon, X.; Sakamoto, Y.; de Vries, P. C.; Salmi, A.; Tala, T.; Angioni, C.; Benkadda, S.; Beurskens, M. N. A.; Bourdelle, C.; Brix, M.; Crombe, K.; Fujita, T.; Futatani, S.; Garbet, X.; Giroud, C.; Hawkes, N. C.; Hayashi, N.; Hoang, G. T.; Hogeweij, G. M. D.; Matsunaga, G.; Nakano, T.; Oyama, N.; Parail, V.; Shinohara, K.; Suzuki, T.; Takechi, M.; Takenaga, H.; Takizuka, T.; Urano, H.; Voitsekhovitch, I.; Yoshida, M.

    2011-01-01

    The paper compares the transport properties of a set of dimensionless identity experiments performed between JET and JT-60U in the advanced tokamak regime with internal transport barrier, ITB. These International Tokamak Physics Activity, ITPA, joint experiments were carried out with the same plasma

  14. Edge pedestal characteristics in JET and JT-60U tokamaks under variable toroidal field ripple

    NARCIS (Netherlands)

    Urano, H.; Saibene, G.; Oyama, N.; Parail, V.; P. de Vries,; Sartori, R.; Kamada, Y.; Kamiya, K.; Loarte, A.; Lonnroth, J.; Sakamoto, Y.; Salmi, A.; Shinohara, K.; Takenaga, H.; Yoshida, M.

    2011-01-01

    The effects of toroidal field (TF) ripple on the edge pedestal characteristics were examined in the TF ripple scan experiments at the plasma current I(p) of 1.1 MA in JET and JT-60U. The TF ripple amplitude delta(R) was defined as a value averaged over the existing ripple wells at the separatrix on

  15. Machine performance and its effects on experiments in JT-60U

    International Nuclear Information System (INIS)

    Kondo, I.

    1995-01-01

    The operational results of JT-60U were reviewed in light of the strategy made at the design stage. The operational plan for better confinement shifted from that of low q to high poloidal beta plasma configuration with higher q value according to the revealed machine properties. Some technical and operational skills helped bring about the recent results out of the machine. (orig.)

  16. VME multiprocessor system for plasma control at the JT-60 Upgrade

    International Nuclear Information System (INIS)

    Kimura, T.; Kurihara, K.; Takahashi, M.; Kawamata, Y.; Akasaka, H.; Matsukawa, M.

    1989-01-01

    In this paper design and preliminary tests are reported of a VME multiprocessor system for the JT-60 Upgrade plasma control utilizing three MC88100 based RISC computers and VME buses. The design of the VME system was stimulated by faster and more accurate computation requirements for the plasma position and shape control

  17. JT-60 negative ion beam NBI apparatus. Present state of its construction and initial experimental results

    Energy Technology Data Exchange (ETDEWEB)

    Kuriyama, Masaaki [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    1997-02-01

    The NBI (Neutral Beam Injection) apparatus used for negative ion at first in the world, has an aim to actually prove heating and electric current drive with high density plasma at the JT-60 and to constitute physical and technical bases for selection and design of heating apparatus of ITER (International Thermal Nuclear Fusion Experimental Reactor). Construction of 500 KeV negative ion NBI apparatus for the JT-60 started to operate on 1993 was completed at March, 1996. On the way, at a preliminary test on forming and acceleration of the negative ion beam using a portion of this apparatus, 400 KeV and 13.5 A/D of the highest deuterium negative ion beam acceleration in the world was obtained successfully, which gave a bright forecasting of the plasma heating and electric current drive experiment using the negative ion NBI apparatus. After March, 1996, some plans to begin beam incident experiment at the JT-60 using the negative ion NBI apparatus and to execute the heating and electric current drive experiment at the JT-60 under intending increase of beam output are progressed. (G.K.)

  18. State Ownership of the praeda bellica during the Roman Republic

    Directory of Open Access Journals (Sweden)

    José Miguel Piquer-Marí

    2017-01-01

    Full Text Available From a Public Law perspective, and with particular regards to the subject of public property, this paper examines the praeda bellica as an asset belonging to the Roman people during the times of the Republic. Through an analysis of the ownership of the praeda bellica, the research intends to provide an in depth understanding of legal and proprietary relationships shaping the Public branch of the Law.

  19. Phytochemicals and bioactivity in wild German and Roman chamomiles infusions

    OpenAIRE

    Guimarães, Rafaela; Barros, Lillian; Calhelha, Ricardo C.; Carvalho, Ana Maria; Queiroz, Maria João R.P.; Ferreira, Isabel C.F.R.

    2013-01-01

    Natural matrices represent a rich source of biologically active compounds and are an example of molecular diversity, with recognized potential in drug discovery. In the present work, the infusions of Matricaria recutita L. (German chamomile) and Chamaemelum nobile L. (Roman chamomile) were submitted to an analysis of phenolic compounds and evaluation of bioactivity. Phenolic compounds were characterized by reversed-phase high performance liquid chromatography coupled to diode a...

  20. Looking for Colour on Greek and Roman Sculpture

    OpenAIRE

    Amanda Claridge

    2011-01-01

    Review of: Vinzenz Brinkmann, Oliver Primavesi, Max Hollein, (eds), Circumlitio. The Polychromy of Antique and Medieval Sculpture. Liebighaus Skulpturensammlung, Frankfurt am Main, 2010. New scientific methods now being applied to the analysis of traces of pigments and gilding on ancient Greek and Roman marble statuary, and other marble artefacts, have the potential to revolutionise our understanding of the relationship between form and colour in antiquity. At present the enquiry is still...

  1. Early Roman military fortifications and the origin of Trieste, Italy.

    Science.gov (United States)

    Bernardini, Federico; Vinci, Giacomo; Horvat, Jana; De Min, Angelo; Forte, Emanuele; Furlani, Stefano; Lenaz, Davide; Pipan, Michele; Zhao, Wenke; Sgambati, Alessandro; Potleca, Michele; Micheli, Roberto; Fragiacomo, Andrea; Tuniz, Claudio

    2015-03-31

    An interdisciplinary study of the archaeological landscape of the Trieste area (northeastern Italy), mainly based on airborne light detection and ranging (LiDAR), ground penetrating radar (GPR), and archaeological surveys, has led to the discovery of an early Roman fortification system, composed of a big central camp (San Rocco) flanked by two minor forts. The most ancient archaeological findings, including a Greco-Italic amphora rim produced in Latium or Campania, provide a relative chronology for the first installation of the structures between the end of the third century B.C. and the first decades of the second century B.C. whereas other materials, such as Lamboglia 2 amphorae and a military footwear hobnail (type D of Alesia), indicate that they maintained a strategic role at least up to the mid first century B.C. According to archaeological data and literary sources, the sites were probably established in connection with the Roman conquest of the Istria peninsula in 178-177 B.C. They were in use, perhaps not continuously, at least until the foundation of Tergeste, the ancestor of Trieste, in the mid first century B.C. The San Rocco site, with its exceptional size and imposing fortifications, is the main known Roman evidence of the Trieste area during this phase and could correspond to the location of the first settlement of Tergeste preceding the colony foundation. This hypothesis would also be supported by literary sources that describe it as a phrourion (Strabo, V, 1, 9, C 215), a term used by ancient writers to designate the fortifications of the Roman army.

  2. Bone tuberculosis in Roman Period Pannonia (western Hungary

    Directory of Open Access Journals (Sweden)

    Tamás Hajdu

    2012-12-01

    Full Text Available The purpose of this study was to analyse a skeleton (adult female, 25-30 years that presented evidence of tuberculous spondylitis. The skeleton, dated from the Roman Period (III-VI centuries, was excavated near the town of Győr, in western Hungary. The skeleton was examined by gross observation supplemented with mycolic acid and proteomic analyses using MALDI-TOF/TOF tandem mass spectrometry. The biomolecular analyses supported the morphological diagnosis.

  3. Tourist valorization of roman imperial city Felix Romuliana

    Directory of Open Access Journals (Sweden)

    Berić Dejan

    2012-01-01

    Full Text Available The tourism industry is a great potential for the development of Serbia. The main characteristics of the existing and potential tourist offer of Serbia are interesting and diverse natural resources and cultural and historical heritage. Felix Romuliana, established palace of the Roman emperor Galerius, is located in the valley of the Black Timok, near Zaječar and the village of Gamzigrad in eastern Serbia. The palace was built in the late third and early fourth century, as a testamentary construction. This is where the Roman emperor was buried and included among the gods. It is the best preserved example of Roman palatial architecture which in 2007 was added to the List of World Heritage of UNESCO. One of the key tasks of this paper is to point out ways of promoting and popularizing this tourism potential that can be used as a resource for the development of cultural tourism and as such strengthen the position of Serbia''s tourist offer in Europe. The aim of this paper is contained in the presentation of the site Felix Romuliana and extraction of the most important attractiveness through valorization, which on the bases of historical and cultural significance may be activated for tourism purposes. [Projekat Ministarstva nauke Republike Srbije, br. 176020

  4. The barbarians within. Illyrian colonists in roman Dacia

    Directory of Open Access Journals (Sweden)

    Irina NEMETI

    2011-03-01

    Full Text Available The present study attempts at grasping, as encompasing as possible, the process of acculturation undergone by peregrins from the Illyrian territories, a process that continued after their colonization in Dacia. The analysis follows the specific forms of organization of the various gentes arrived from Dalmatia (kastella, vicus, principes, noting the organized character of the colonization of these dalmatians, specialists in gold extraction. They were brought in compact groups and had their own institutions. The onomastic study took into consideration all persons who, through their names, relatives or origin, can be identified as illiri. Four groups of people have been identified, each illustrating a stage in their acculturation reflected in the onomastic system. In the field of religious life, one can note a continuous oscillation between the preservation of ancient values and the borrowing of new religious forms, which eventually lead to the colonized Illyrians assuming a new cultural identity. Learning Latin, acquiring Latin names, and adopting Roman gods indicates in historical terms their Romanization. In the funerary field, they were more conservative. As a funerary phenomenon, incineration with the deposition of calcined remains in ritually burnt pits is attributed to populations colonized in Dacia from the Dalmatian area. As for the inventory of their tombs and their funerary monuments on the other hand, one notes that they took over Roman material culture and used monuments that follow the canons of provincial art.

  5. The traces of roman metallurgy in Eastern Serbia

    Directory of Open Access Journals (Sweden)

    Petković Sofija

    2009-01-01

    Full Text Available The archaeological traces of the Roman mining and metallurgy in eastern Serbia are rather frequent but insufficiently studied and published. Three mining-metallurgical regions abounding in gold, silver, copper, iron and lead could be distinguished there: 1. the upper course of the Pek river, metalla Pincensia, 2. the area between Bor, Zlot, Crna Reka and Rgotina and 3. the area in the river basin of Beli Timok, two latter ones had been organized as territoria metallorum. The archeometallurgical sites confirmed by investigations are: Kraku lu Jordan at the confluence of the Brodica river and the Pek river, Rudna Glava, Tilva Roš in Bor, Gamzigrad - Romuliana, Rgotina near Zaječar and Timacum Minus in the village Ravna near Knjaževac. Roman mining-metallurgical activities in eastern Serbia flourished from the end of the 3rd century, were interrupted by the invasion of Huns in AD 441. and restored in the time of emperors Anastasius and Justin I, in the end of the 5th - beginning of the 6th centuries. The Roman mining-metallurgical centers functioned in the 6th century until the Slav invasion in the beginning of the 7th century.

  6. The regenerative medicine coalition. Interview with Frank-Roman Lauter.

    Science.gov (United States)

    Lauter, Frank-Roman

    2012-11-01

    Frank-Roman Lauter, Secretary General of the recently launched Regenerative Medicine Coalition, explains how the coalition was formed and what they hope to achieve. Frank-Roman Lauter has served as Secretary General of the Regenerative Medicine Coalition since 2012, and as Head of Business Development at Berlin-Brandenburg Center for Regenerative Therapies since 2007. Frank-Roman Lauter's interest is the organization of academic infrastructures to promote efficient translation of research findings into new therapies. He co-organizes joined strategy development for regenerative medicine clusters from seven European countries (FP7-EU Project) and has initiated cooperation between the California Institute for Regenerative Medicine and the German Federal Ministry for Education & Research, resulting in a joined funding program. Recently, he cofounded the international consortium of Regenerative Medicine translational centers (RMC; www.the-rmc.org ). Trained as a molecular biologist at the Max-Planck Institute in Berlin-Dahlem and at Stanford, he has 16 years of experience as an entrepreneur and life science manager in Germany and the USA.

  7. Review of ICRF antenna development and heating experiments up to advanced experiment I, 1989 on the JT-60 tokamak

    International Nuclear Information System (INIS)

    Fujii, Tsuneyuki

    1992-03-01

    Two main subjects of ion cyclotron range of frequencies (ICRF) heating on JT-60 are described in this paper from development phase of the JT-60 ICRF heating system up to advanced experiment I, 1989. One is antenna design and development for the high power JT-60 ICRF heating system (6 MW for 10 s at a frequency range of 108 - 132 MHz). The other is the experimental investigation of characteristics of second harmonic ICRF heating in a large tokamak. (J.P.N.)

  8. Development of a linear motion antenna for the JT-60SA ECRF system

    International Nuclear Information System (INIS)

    Moriyama, Shinichi; Kobayashi, Takayuki; Isayama, Akihiko; Hoshino, Katsumichi; Suzuki, Sadaaki; Hiranai, Shinichi; Yokokura, Kenji; Sawahata, Masayuki; Terakado, Masayuki; Hinata, Jun; Wada, Kenji; Sato, Yoshikatsu

    2013-01-01

    Highlights: ► Development of an antenna featuring linear motion (LM) concept for long pulse electron cyclotron range of frequency (ECRF) heating and current drive in JT-60SA is in progress. ► A mock-up using a metallic sliding bearing with solid lubricant was fabricated. ► A vacuum pumping test with mass analyzer showed evidence of some hydrocarbons during shaft motion. ► Injection beam profile in toroidal beam scan was checked by low power measurement with mock-up. ► Current drive characteristics with the LM antenna for typical experimental scenarios of JT-60SA have been investigated by calculation. -- Abstract: Development of an antenna that features the linear motion (LM) concept for long-pulse electron-cyclotron range of frequency heating and current drive for the JT-60SA is in progress. Combining a linearly movable first mirror and a fixed curved second mirror allows the injection-beam angle to be controlled. Cooling water is fed through the drive shaft for the first mirror and through the fixed support for the second mirror. The shaft support structure uses a metallic sliding bearing with a solid lubricant. The sliding bearing supports combined linear and rotational motion, whereas a conventional ball bearing supports either linear or rotational motion. Therefore, the sliding bearing offers the advantage of reducing the support-structure volume, which is important in the design of the relatively narrow port duct of the JT-60SA. Recently, the sliding bearing has been installed into the mockup. Results of a vacuum test with a mass analyzer indicate the presence of hydrocarbons during shaft motion. The injection-beam profile obtained from a toroidal beam scan is checked against low-power measurements taken on the mockup. Finally, for typical JT-60SA experimental scenarios, heating- and current-drive characteristics of the LM antenna are investigated theoretically

  9. Identification of green pigments from fragments of Roman mural paintings of three Roman sites from north of Germania Superior

    Science.gov (United States)

    Debastiani, Rafaela; Simon, Rolf; Goettlicher, Joerg; Heissler, Stefan; Steininger, Ralph; Batchelor, David; Fiederle, Michael; Baumbach, Tilo

    2016-10-01

    Roman mural green pigment painting fragments from three Roman sites in the north of the Roman province Germania Superior: Koblenz Stadtwald Remstecken (KOSR), Weißenthurm " Am guten Mann" (WEIS) and Mendig Lungenkärchen (MELU), dating from second and third centuries AD were analyzed. The experiments were performed nondestructively using synchrotron-based scanning macro-X-ray fluorescence (SR-MA-XRF), synchrotron-based scanning micro-X-ray fluorescence (SR-μ-XRF), synchrotron-based X-ray diffraction (SR-XRD) and Raman spectroscopy. Correlation between SR-MA-XRF, SR-μ-XRF elemental map distributions and optical images of scanned areas was mainly found for the elements Ca, Fe and K. With XRF, Fe and K were identified correlated with green pigment, but in samples from two sites, Mendig Lungenkärchen and Weißenthurm " Am guten Mann", also Cu was detected in minor concentration. The results of SR-XRD and Raman spectroscopy were limited to one sample from Weißenthurm " Am guten Mann". In this sample, green earth and calcium carbonate were identified by SR-XRD and, additionally, malachite by Raman spectroscopy.

  10. Studies on capillary tube expansion device used in J-T refrigerators operating with nitrogen-hydrocarbon mixtures

    Science.gov (United States)

    Harish Kruthiventi, S. S.; Venkatarathnam, G.

    2017-10-01

    Capillary tube expansion devices are used extensively in small closed cycle J-T refrigerators operating with refrigerant mixtures due to its low cost and the absence of any moving parts. It is possible for J-T refrigerators operating with mixtures that the velocity of refrigerant mixture at capillary tube outlet reaches a value where it equals the speed of sound at certain conditions. The variation of the speed of sound of nitrogen-hydrocarbon mixtures used in J-T refrigerators has been studied in two phase (vapour-liquid) and three-phase (Vapour-liquid-liquid) region as a function of temperature and pressure in this work. Also the conditions under which choking occurs in practical J-T refrigerators is investigated.

  11. developing of antique olympic plays in a roman period at board of different emperors

    Directory of Open Access Journals (Sweden)

    Kasianenko O.G.

    2009-12-01

    Full Text Available Researched the questions of development the Ancient Olympic Games, after the capture Greece territory by the Roman army. This condition and development in future fully depended on the social and political phenomena in Roman society preferring more aggressive types of «spectacles». The direction of quickly changing emperors was represented on status of the competitions. Positive relation authorities to competitions brought to achievement the second «bloom» of the Olympic Games in the Roman period.

  12. Medications and their use in the Graeco-Roman era

    Directory of Open Access Journals (Sweden)

    François Retief

    2007-09-01

    Full Text Available As from the 6th century BC Graeco-Roman medical therapy comprised three components, viz. diet and healthy lifestyle (regimen, surgery and medicaments (pharmacotherapy, of which the latter was the oldest. Although the Corpus Hippocraticum (5th century BC, with minor Egyptian influence, contained no text of medicines as such, and seemed to prefer regimen to medicaments, it nevertheless laid the foundation for the empirical use of pharmacotherapy (free of superstition and magic for the next millennium. The first Greek herbal was produced by Diocles in the 4th century BC, when the botanist Theophrastus also wrote his classic works on plants which contained a significant contribution on herbal medicines. The Alexandrian Medical School systematized and expanded Hippocratic medicine, and Herophilus introduced compound preparations. The concept that medicaments cure illness by restoring the bodily balance of humours and primary properties was largely perpetuated, but new views on physiology were gradually emerging. Unfortunately the bulk of original contributions from Hellenistic doctors are lost to posterity and only known to us through the writings of for example Celsus and Galen in Roman times. The interesting history of theriac, the so-called universal antidote, is reviewed. In the 1st century Dioscorides produced his Materia Medica which remained an authoritative pharmacopoeia up to modern times. Galen’s empiric views on pharmacotherapy (2nd century, still largely based on Hippocrates, became dogma in Medieval times, but mysticism and superstition gradually swept back into medicine. Retrospectively it is clear that with the exception of certain analgesics and narcotics like opium, Graeco-Roman medicaments were pharmacologically inert (even toxic and obtained positive results largely through a placebo effect.

  13. X-ray fluorescence analysis and optical emission spectrometry of an roman mirror from Tomis, Romania

    International Nuclear Information System (INIS)

    Belc, M.; Bogoi, M.; Ionescu, D.; Guita, D.; Caiteanu, S.; Caiteanu, D.

    2000-01-01

    The miscellaneous population of Roman Empire, their diverse cultural tradition, their ability to assimilate the roman civilization spirits, had determined a permanent reassessment superimposed upon the roman contribution. Analysis was undertaken using optical emission spectrometry and non-destructive X-ray fluorescence. X-ray fluorescence analysis is a well-established method and is often used in archaeometry and other work dealing with valuable objects pertaining to the history of art and civilization. Roman mirror analysed has been found not to be made of speculum (a high tin bronze). (authors)

  14. PIXE-PIGE analysis of late roman glass fragments

    Energy Technology Data Exchange (ETDEWEB)

    Gomez-Tubio, B. [Departamento de Fisica Aplicada III, Escuela de Ingenieros, Universidad de Sevilla, Camino de los Descubrimientos s/n, 41092 Sevilla (Spain)]. E-mail: tubio@us.es; Ontalba Salamanca, M.A. [Departamento de Fisica, Escuela Politecnica, Universidad de Extremadura, Avda. de la Universidad s/n, 10071 Caceres (Spain); Ortega-Feliu, I. [Centro Nacional de Aceleradores, Universidad de Sevilla, Avda. Thomas A. Edison s/n, 41092 Sevilla (Spain); Respaldiza, M.A. [Centro Nacional de Aceleradores, Universidad de Sevilla, Avda. Thomas A. Edison s/n, 41092 Sevilla (Spain); Amores Carredano, F. [Departamento de Prehistoria y Arqueologia, Universidad de Sevilla, C/Dona Maria de Padilla s/n, 41010 Sevilla (Spain); Gonzalez-Acuna, D. [Departamento de Geografia, Historia y Filosofia, Universidad Pablo de Olavide, Ctra. de Utrera Km 1, 41013 Sevilla (Spain)

    2006-08-15

    A set of Roman glass fragments, excavated at Sevilla and dated in the 5th century A.D., has been analysed by PIXE and PIGE techniques using the external beam set-up of the 3 MV tandem Pelletron accelerator of the CNA at the University of Sevilla. Using a simple quantification method, based on the indirect charge calculation on the sample by monitoring the X-ray induced by the proton beam on the exit window, the composition of the glasses has been determined. From the obtained results, the use of soda as flux has been inferred and colouring manufacture procedures have been identified.

  15. Greek or Roman historical personages in the Quixote

    Directory of Open Access Journals (Sweden)

    Juan Antonio López Férez

    2008-12-01

    Full Text Available This paper concentrates on the presence of Greek or Roman historical personages in Don Quixote, offering the passages with the pertinent commentary and notes. Following a chronological order, and indicating in brackets the number of mentions, we have: Lycurgus (1; Tulia, Servius Tulius daughter (1; Lucretia (2; Horatius Cocles (1; Caius Mucius Scevola (1; Artemisia-Mausolus (1; Alexander the Great (13; Hannibal (2; Publius Cornelius Scipio, Africanus (1; Viriatus (1; Sulla-Marius-Catillina (1; Julius Caesar (6; Portia (1; Augustus (2; Nero (2; Traianus-Hadrianus (1.

  16. Analysis of metals with luster: Roman brass and silver

    Energy Technology Data Exchange (ETDEWEB)

    Fajfar, H., E-mail: helena.fajfar@ijs.si [Jožef Stefan Institute, Jamova 39, SI-1000 Ljubljana (Slovenia); Jožef Stefan International Postgraduate School, Jamova 39, SI-1000 Ljubljana (Slovenia); Rupnik, Z. [Jožef Stefan Institute, Jamova 39, SI-1000 Ljubljana (Slovenia); Šmit, Ž. [Jožef Stefan Institute, Jamova 39, SI-1000 Ljubljana (Slovenia); Faculty of Mathematics and Physics, University of Ljubljana, Jadranska 19, SI-1000 Ljubljana (Slovenia)

    2015-11-01

    Non-destructive PIXE analysis using in-air proton beam was used for the studies of earliest brass coins issued during the 1st century BC by Greek cities in Asia Minor, Romans and Celts, and for the studies of plated low grade silver coins of the 3rd century AD. The analysis determined the levels of zinc and important trace elements, notably selenium, which confirms spread of selenium-marked copper from the east. For plating, combined tinning and silvering was identified by the mapping technique for the mid 3rd century AD, which evolved into mere plating by 270 AD.

  17. Archaeometrical studies of Greek and Roman silver coins

    International Nuclear Information System (INIS)

    Bugoi, R.; Constantinescu, B.; Constantin, F.; Catana, D.; Plostinaru, D.

    1999-01-01

    Quantitative analyses of various silver coins from the firs century BC, found on current Romanian territory (Thasian tetradrachmae, Apollonia and Dyrrachium drachmae, Roman republican denarii) were performed using PIXE (3 MeV external proton beam) and XRF (1.1 GBq 241 Am source). The elemental analysis provided evidence of a great variety of monetary alloys and helped Romanian archaeologists to classify the coins, in terms of their provenance, as originals, copies or imitations minted in different areas of the Balkan-Carpathian region. (author)

  18. Looking for Colour on Greek and Roman Sculpture

    Directory of Open Access Journals (Sweden)

    Amanda Claridge

    2011-12-01

    Full Text Available Review of: Vinzenz Brinkmann, Oliver Primavesi, Max Hollein, (eds, Circumlitio. The Polychromy of Antique and Medieval Sculpture. Liebighaus Skulpturensammlung, Frankfurt am Main, 2010. New scientific methods now being applied to the analysis of traces of pigments and gilding on ancient Greek and Roman marble statuary, and other marble artefacts, have the potential to revolutionise our understanding of the relationship between form and colour in antiquity. At present the enquiry is still in its infancy, but the papers delivered at a conference held in Frankfurt in 2008, reviewed here, provide a general introduction to the subject and to a wide range of work in progress.

  19. Analysis of metals with luster: Roman brass and silver

    International Nuclear Information System (INIS)

    Fajfar, H.; Rupnik, Z.; Šmit, Ž.

    2015-01-01

    Non-destructive PIXE analysis using in-air proton beam was used for the studies of earliest brass coins issued during the 1st century BC by Greek cities in Asia Minor, Romans and Celts, and for the studies of plated low grade silver coins of the 3rd century AD. The analysis determined the levels of zinc and important trace elements, notably selenium, which confirms spread of selenium-marked copper from the east. For plating, combined tinning and silvering was identified by the mapping technique for the mid 3rd century AD, which evolved into mere plating by 270 AD.

  20. Hairstyles in the arts of Greek and Roman antiquity.

    Science.gov (United States)

    Haas, Norbert; Toppe, Francoise; Henz, Beate M

    2005-12-01

    Styling one's hair seems to be an innate desire of humans to emphasize their beauty and power. As reviewed here, hairstyles were influenced by preceding cultures, by religion, by those depicted for gods and emperors on sculptures and coins. In addition, they were determined by aspects of lifestyle such as sports, wealth, and the desire to display inner feelings. The historical changes in fashions can be exemplarily followed by a visitor to an art collection of Graeco-Roman antiquity. The study of hairstyles permits an insight into very basic aspects of the self-conception of individuals and of the respective societies.

  1. THE ROMAN-CATHOLIC DEFINITIONS TO COMMEMORATIVE PARTICLES

    Directory of Open Access Journals (Sweden)

    MICHAIL ASMUS

    2008-11-01

    Full Text Available The author overviews and analyses selected Roman-Catholic theological texts deal-ing with the meaning of commemorative particles in the Protesis of the Byzantine rite dating back to the XV–XVIII centuries. Peter Arcudius is the key person because it was his theological doctrine that in 1720 brought on the Counsil decision about the trans-substantiation of particles. This work gives further development to the previous study of the particles’ conception in the Orthodox East carried out by the author in 2005 and published in this review (issue 14, 2005.

  2. Review of JT-60U experimental results in 1998

    International Nuclear Information System (INIS)

    Adachi, H.; Akasaka, H.; Akino, N.

    1999-09-01

    Based on the high confinement regimes such as reversed shear mode, high-β p mode and H-mode, the JT-60U experiment in 1998 was devoted to expand the discharge regimes in terms of 1) achievement of high fusion gain, 2) concept optimization for long sustainment of the advanced modes for >>τ E and >τ p * with the current profile close to the steady-state solution, 3) high confinement by electron heating (T e >T i ), 4) high confinement at high electron density and/or at high divertor radiation and 5) active control of multiple parameters including both core and divertor plasmas. As for the reversed shear mode, high performance discharges satisfying Q DT eq (DT equivalent fusion gain ) >1 were obtained reproducibly and the record value of Q DT eq =1.25 was achieved in a reactor-relevant thermonuclear dominant regime due to the optimized discharge scenario using feedback control of the neutron production rate where β-values were kept in the MHD stable region during the I p ramping phase with a large radius of the internal transport barrier (ITB). The reduction of Z eff obtained after installation of W-shaped pumped divertor increased fusion reaction rate. Concerning long sustainment, the reversed shear ELMy H-mode with H 89PL -factor∼1.5-2 and β N =1.0-1.4 was kept for 5.5 s with NB heating. By off axis LH current drive, the reversed shear current profile with the ITB was kept constant for 4.7 s under full non- inductive current drive condition (LHCD=77%, bootstrap=23%) at T e -1.2T i . In the high-β p ELMy H-mode regime, benefits of the high triangularity shape were demonstrated. At a high triangularity δ X ∼0.46, β N =2.5-2.7 was sustained for 3.5 s even at the low value of q 95 =2.9-3.3. The product of β N xH-factor sustainable for >5τ E (>τ p *) increases with δ x and reaches ∼6 at δ X ∼0.46. In addition to extension of the discharge regimes, the key phenomena determining transport and stability around ITBs were studied intensively. For the

  3. Review of JT-60U experimental results in 2000

    International Nuclear Information System (INIS)

    2002-11-01

    The results of JT-60U experiments in 2000, from February to December, are reviewed. The performance under the full non-inductive current drive has been greatly advanced both in high β p H-mode plasmas and in reversed shear (RS) plasmas. In the high β p H-mode, with injection of the negative ion based neutral beam (NNB) of 360 keV and 4 MW into a high electron temperature plasma (T e (0) ∼ 13 keV), a high fusion triple product n D (0)T i (0)τ E = 2.0 x 10 20 keVm -3 s has been obtained at the plasma current of 1.5 MA, and the highest value of current drive efficiency of NNB (1.55 x 10 19 A/W/m 2 ) has been achieved. In RS, LHCD and NNB-CD were employed for current drive and high confinement (HH y2 ∼ 1.4) at high density (f GW ∼ 0.80) has been achieved. In the 110 GHz ECRF system, two more gyrotrons have been installed in addition to the one installed in 1999 and 1.5 MW was injected into the torus for 3 s. Complete stabilization of neoclassical tearing mode (NTM), realization of high confinement plasmas with T e ∼ T i , a high value (1 MA) of NNB-driven current in the high T e regime, and measurement of localized EC driven current were achieved with the upgraded EC system. The multiple pellet injection system has been newly installed. In high power NB heated plasmas, high-field-side pellet injection was more effective than low-field-side injection, and it extended the regime of high confinement high β p H-mode to a higher density. A new method, called CCS (Cauchy-condition surface method), for the control of the plasma position and shape in real-time became available and was found very useful especially for the control of plasma-wall clearance in LH and IC experiments. The active control of ITB strength by the switch of the injection direction of toroidal angular momentum was successfully demonstrated. In high triangularity H-mode plasmas, higher pressure and temperature at the edge pedestal were observed, which resulted in higher temperature and

  4. Review of JT-60U experimental results in 1998

    Energy Technology Data Exchange (ETDEWEB)

    Adachi, H.; Akasaka, H.; Akino, N. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

    1999-09-01

    Based on the high confinement regimes such as reversed shear mode, high-{beta}{sub p} mode and H-mode, the JT-60U experiment in 1998 was devoted to expand the discharge regimes in terms of 1) achievement of high fusion gain, 2) concept optimization for long sustainment of the advanced modes for >>{tau}{sub E} and >{tau}{sub p}* with the current profile close to the steady-state solution, 3) high confinement by electron heating (T{sub e}>T{sub i}), 4) high confinement at high electron density and/or at high divertor radiation and 5) active control of multiple parameters including both core and divertor plasmas. As for the reversed shear mode, high performance discharges satisfying Q{sub DT}{sup eq} (DT equivalent fusion gain ) >1 were obtained reproducibly and the record value of Q{sub DT}{sup eq}=1.25 was achieved in a reactor-relevant thermonuclear dominant regime due to the optimized discharge scenario using feedback control of the neutron production rate where {beta}-values were kept in the MHD stable region during the I{sub p} ramping phase with a large radius of the internal transport barrier (ITB). The reduction of Z{sub eff} obtained after installation of W-shaped pumped divertor increased fusion reaction rate. Concerning long sustainment, the reversed shear ELMy H-mode with H{sup 89PL}-factor{approx}1.5-2 and {beta}{sub N}=1.0-1.4 was kept for 5.5 s with NB heating. By off axis LH current drive, the reversed shear current profile with the ITB was kept constant for 4.7 s under full non- inductive current drive condition (LHCD=77%, bootstrap=23%) at T{sub e}-1.2T{sub i}. In the high-{beta}{sub p} ELMy H-mode regime, benefits of the high triangularity shape were demonstrated. At a high triangularity {delta}{sub X}{approx}0.46, {beta}{sub N}=2.5-2.7 was sustained for 3.5 s even at the low value of q{sub 95}=2.9-3.3. The product of {beta}{sub N}xH-factor sustainable for >5{tau}{sub E} (>{tau}{sub p}*) increases with {delta}{sub x} and reaches {approx}6 at {delta

  5. Joint resistance measurements of pancake and terminal joints for JT-60SA EF coils

    Energy Technology Data Exchange (ETDEWEB)

    Obana, Tetsuhiro, E-mail: obana.tetsuhiro@LHD.nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Takahata, Kazuya; Hamaguchi, Shinji; Mito, Toshiyuki; Imagawa, Shinsaku [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Kizu, Kaname; Murakami, Haruyuki; Yoshida, Kiyoshi [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

    2013-11-15

    Highlights: • To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted with a joint sample. • The joint sample was composed of pancake and terminal joints. • The measurements demonstrated that both joints fulfilled the design requirement. • Considering the measurements, the characteristics of both joints were investigated using an analytical model that represents the joints. -- Abstract: To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted using a sample consisting of pancake and terminal joints. Both joints are shake-hands lap joints composed of cable-in-conduit conductors and a pure copper saddle-shaped spacer. The measurements demonstrated that both joints fulfilled the design requirement. Considering these measurements, the characteristics of both joints were investigated using analytical models that represent the joints. The analyses indicated that the characteristics of the conductors used in the joints affect the characteristics of the joints.

  6. A new workstation based man/machine interface system for the JT-60 Upgrade

    International Nuclear Information System (INIS)

    Yonekawa, I.; Shimono, M.; Totsuka, T.; Yamagishi, K.

    1992-01-01

    Development of a new man/machine interface system was stimulated by the requirements of making the JT-60 operator interface more 'friendly' on the basis of the past five-year operational experience. Eleven Sun/3 workstations and their supervisory mini-computer HIDIC V90/45 are connected through the standard network; Ethernet. The network is also connected to the existing 'ZENKEI' mini-computer system through the shared memory on the HIDIC V90/45 mini-computer. Improved software, such as automatic setting of the discharge conditions, consistency check among the related parameters and easy operation for discharge result data display, offered the 'user-friendly' environments. This new man/machine interface system leads to the efficient operation of the JT-60. (author)

  7. Design, fabrication and test of double-wall vacuum vessel for JT-60U

    International Nuclear Information System (INIS)

    Uchikawa, Takashi; Ioki, Kimihiro; Ninomiya, Hiromasa.

    1994-01-01

    A double-wall vacuum vessel was designed and fabricated for JT-60U (an upgraded machine of JT-60), which has a plasma current up to 6 MA and a large plasma volume (100 m 3 ). A new concept of Inconel 625 all-welded structure was adopted to the vessel, that comprises an inner plate, square tubes and an outer plate. The vacuum vessel with a multi-arc D-shaped cross section was fabricated by using hot-sizing press. The electromagnetic and structural analysis has been performed for plasma disruption loads. Dynamic responses of the vessel were measured during plasma disruptions, and the observed displacement had a good agreement with the result of FEM analysis. (author)

  8. Physics and operation oriented activities in preparation of the JT-60SA tokamak exploitation

    Science.gov (United States)

    Giruzzi, G.; Yoshida, M.; Artaud, J. F.; Asztalos, Ö.; Barbato, E.; Bettini, P.; Bierwage, A.; Boboc, A.; Bolzonella, T.; Clement-Lorenzo, S.; Coda, S.; Cruz, N.; Day, Chr.; De Tommasi, G.; Dibon, M.; Douai, D.; Dunai, D.; Enoeda, M.; Farina, D.; Figini, L.; Fukumoto, M.; Galazka, K.; Galdon, J.; Garcia, J.; Garcia-Muñoz, M.; Garzotti, L.; Gil, C.; Gleason-Gonzalez, C.; Goodman, T.; Granucci, G.; Hayashi, N.; Hoshino, K.; Ide, S.; Imazawa, R.; Innocente, P.; Isayama, A.; Itami, K.; Joffrin, E.; Kamada, Y.; Kamiya, K.; Kawano, Y.; Kawashima, H.; Kobayashi, T.; Kojima, A.; Kubo, H.; Lang, P.; Lauber, Ph.; de la Luna, E.; Maget, P.; Marchiori, G.; Mastrostefano, S.; Matsunaga, G.; Mattei, M.; McDonald, D. C.; Mele, A.; Miyata, Y.; Moriyama, S.; Moro, A.; Nakano, T.; Neu, R.; Nowak, S.; Orsitto, F. P.; Pautasso, G.; Pégourié, B.; Pigatto, L.; Pironti, A.; Platania, P.; Pokol, G. I.; Ricci, D.; Romanelli, M.; Saarelma, S.; Sakurai, S.; Sartori, F.; Sasao, H.; Scannapiego, M.; Shimizu, K.; Shinohara, K.; Shiraishi, J.; Soare, S.; Sozzi, C.; Stępniewski, W.; Suzuki, T.; Suzuki, Y.; Szepesi, T.; Takechi, M.; Tanaka, K.; Terranova, D.; Toma, M.; Urano, H.; Vega, J.; Villone, F.; Vitale, V.; Wakatsuki, T.; Wischmeier, M.; Zagórski, R.

    2017-08-01

    The JT-60SA tokamak, being built under the Broader Approach agreement jointly by Europe and Japan, is due to start operation in 2020 and is expected to give substantial contributions to both ITER and DEMO scenario optimisation. A broad set of preparation activities for an efficient start of the experiments on JT-60SA is being carried out, involving elaboration of the Research Plan, advanced modelling in various domains, feasibility and conception studies of diagnostics and other sub-systems in connection with the priorities of the scientific programme, development and validation of operation tools. The logic and coherence of this approach, as well as the most significant results of the main activities undertaken are presented and summarised.

  9. A coil test facility for the cryogenic tests of the JT-60SA TF coils

    International Nuclear Information System (INIS)

    Chantant, M.; Genini, L.; Bayetti, P.; Millet, F.; Wanner, M.; Massaut, V.; Corte, A. Della; Ardelier-Desage, F.; Catherine-Dumont, V.; Dael, A.; Decool, P.; Donati, A.; Duchateau, J.L.; Garibaldi, P.; Girard, S.; Hatchressian, J.C.; Fejoz, P.; Jamotton, P.; Jourdheuil, L.; Juster, F.P.

    2011-01-01

    In the framework of the Broader Approach Activities, the EU will deliver to Japan the 18 superconducting coils, which constitute the JT-60SA Toroidal field magnet. These 18 coils, manufactured by France and Italy, will be cold tested before shipping to Japan. For this purpose, the European Joint Undertaking for ITER, the Development of Fusion Energy ('Fusion for Energy', F4E) and the European Voluntary Contributors are collaborating to design and set-up a coil test facility (CTF) and to perform the acceptance test of the 18 JT-60SA Toroidal Field (TF) coils. The test facility is designed to test one coil at a time at nominal current and cryogenic temperature. The test of the first coil of each manufacturer includes a quench triggered by increasing the temperature. The project is presently in the detailed design phase.

  10. Review of JT-60U experimental results from February to October, 1995

    International Nuclear Information System (INIS)

    1996-03-01

    Renewed theme group organization started from October 1994 for the upcoming experiments in JT-60U. This regime has three theme groups each of which is composed of two sub-theme groups as; (1) Plasma Operation Theme (Leader Y. Neyatani) with Operation Sub-Theme and Disruption Sub-Theme, (2) High Performance (Leader S. Ishida) with Confinement and MHD Sub-Theme and High Energy Particle Sub-Theme and (3) Steady State Theme (Leader A. Sakasai) with Current Drive Sub-Theme and Divertor Sub-Theme. The main results from the JT-60U experiments in 1995 are summarized in the overviews of the three theme group activities. (J.P.N.)

  11. Development of virtual private network for JT-60SA CAD integration

    International Nuclear Information System (INIS)

    Oshima, Takayuki; Fujita, Takaaki; Seki, Masami; Kawashima, Hisato; Hoshino, Katsumichi; Shibanuma, Kiyoshi; Verrecchia, M.; Teuchner, B.

    2010-01-01

    The CAD models will be exchanged and integrated at Naka for JT-60SA, a common computer network efficiently connected between Naka site and the Garching site is needed to be established. Virtual Private Network (VPN) was introduced with LAN on computer network physically-separated from JAEA intranet area and firewall. In July 2009, a new VPN connection between the Naka and Garching sites has been successfully demonstrated using IPSec-VPN technology with a commercial and cost-effective firewall/router for security. It was found that the introduction of the Wide Area File Service (WAFS) could solve the issue of the data transmission time and enhance the usability of the VPN for design integration in JT-60SA. (author)

  12. The healthiness of JT-60 ICRF antenna and development of its temperature measurement device

    International Nuclear Information System (INIS)

    Hiranai, Shinichi; Yokokura, Kenji; Moriyama, Shinichi; Sato, Tomio; Ishii, Kazuhiro; Fujii, Tsuneyuki

    1998-03-01

    Ion Cyclotron Range of Frequency (ICRF) heating system in JT-60 employs two antennas to couple RF power in the range of 100 MHz to the plasma. The antennas are installed in the vacuum vessel of JT-60, facing to the high temperature plasma. Due to the severe heat load from the plasma, parts of the antenna surface are suffering from melt. It is important to investigate the mechanism of the heat load and the melting. 'Temperature measurement for ICRF antenna surface' employing an infrared thermographic camera has been developed, in order to investigate the heat load to the antenna and to maintain the antenna available. We have succeeded in minimizing the melting damage of the antenna surface using the temperature measurement device. (author)

  13. Construction of negative-ion based NBI for JT-60U

    International Nuclear Information System (INIS)

    Kawai, Mikito; Akino, Noboru; Ebisawa, Noboru

    2001-11-01

    The world's first negative-ion based neutral beam injector (N-NBI) system has been developed for studies of non-inductive current drive and plasma core heating with high energy neutral beam injection in higher density plasma. Construction of the N-NBI system for JT-60U was completed in March 1996. The system is composed of a beamline with two ion sources, a set of ion source power supplies, control system and auxiliary sub-system such as cooling water, refrigeration and vacuum system. In July 2001, deuterium neutral beam injection of 400keV and 5.8MW into JT-60U plasma was achieved. In order to increase both beam power and energy we have to go on more improvement of the N-NBI. (author)

  14. Global energy confinement in JT-60 neutral beam heated L-mode discharges

    International Nuclear Information System (INIS)

    Naito, O.; Hosogane, N.; Tsuji, S.; Ushigusa, K.; Yoshida, H.

    1990-01-01

    The global energy confinement characteristics of neutral beam heated JT-60 discharges are presented. There is a difference in the dependence of the energy confinement time on the plasma current between limiter and divertor discharges. For limiter discharges, the energy confinement increases with plasma current up to 3.2 MA, whereas for divertor discharges this improvement saturates when the safety factor drops below 3, independent of the location of the X-point. The JT-60 L-mode results indicate that the deterioration in energy confinement for q < 3, which is also found in H-mode regimes of other devices, may be a universal characteristic of divertor discharges. Regarding the scaling with plasma size, it is shown that the global/incremental confinement time increases with plasma minor radius. For sufficiently large plasmas, however, the global/incremental confinement time is no longer a function of minor radius. (author). 13 refs, 14 figs

  15. Results of the H-mode experiments with JT-60 outer and lower divertors

    International Nuclear Information System (INIS)

    Nakamura, Hiroo; Tsuji, Shunji; Nagami, Masayuki

    1989-08-01

    In JT-60, hydrogen H-mode experiments with outer and lower divertors were performed. In the outer divertor, H-mode were obtained, similar to the ones observed in the other lower/upper divertors. Its threshold absorbed power and electron density were 16 MW and 1.8 x 10 19 m -3 . In the two combined heatings with NB+ICRF and NB+LHRF, H-mode discharges are also obtained. Moreover, in new configuration of lower divertor, H-mode phases without and with ELM are obtained. Typical results of the lower divertor are shown to compare the H-mode characteristics between the two configurations. Improvement of the energy confinement time in the two divertors was limited to 10 %. Analyses on ballooning/interchange instabilities were carried out with precise equlibria of JT-60. These results showed that the both modes were enough stable. (author)

  16. Plasma regimes and research goals of JT-60SA towards ITER and DEMO

    International Nuclear Information System (INIS)

    Kamada, Y.; Ide, S.; Fujita, T.; Suzuki, T.; Matsunaga, G.; Yoshida, M.; Shinohara, K.; Urano, H.; Nakano, T.; Sakurai, S.; Kawashima, H.; Barabaschi, P.; Lackner, K.; Ishida, S.; Bolzonella, T.

    2011-01-01

    The JT-60SA device has been designed as a highly shaped large superconducting tokamak with a variety of plasma actuators (heating, current drive, momentum input, stability control coils, resonant magnetic perturbation coils, W-shaped divertor, fuelling, pumping, etc) in order to satisfy the central research needs for ITER and DEMO. In the ITER- and DEMO-relevant plasma parameter regimes and with DEMO-equivalent plasma shapes, JT-60SA quantifies the operation limits, plasma responses and operational margins in terms of MHD stability, plasma transport and confinement, high-energy particle behaviour, pedestal structures, scrape-off layer and divertor characteristics. By integrating advanced studies in these research fields, the project proceeds 'simultaneous and steady-state sustainment of the key performances required for DEMO' with integrated control scenario development applicable to the highly self-regulating burning high-β high bootstrap current fraction plasmas.

  17. Absolute calibration of the neutron yield measurement on JT-60 Upgrade

    International Nuclear Information System (INIS)

    Nishitani, Takeo; Takeuchi, Hiroshi; Barnes, C.W.

    1991-10-01

    Absolutely calibrated measurements of the neutron yield are important for the evaluation of the plasma performance such as the fusion gain Q in DD operating tokamaks. Total neutron yield is measured with 235 U and 238 U fission chambers and 3 He proportional counters in JT-60 Upgrade. The in situ calibration was performed by moving the 252 Cf neutron source toroidally through the JT-60 vacuum vessel. Detection efficiencies of three 235 U and two 3 He detectors were measured for 92 locations of the neutron point source in toroidal scans at two different major radii. The total detection efficiency for the torus neutron source was obtained by averaging the point efficiencies over the whole toroidal angle. The uncertainty of the resulting absolute plasma neutron source calibration is estimated to be ± 10%. (author)

  18. JT-60 power tests from mechanical and thermal viewpoints of tokamak machine

    International Nuclear Information System (INIS)

    Takatsu, H.; Yamamoto, M.; Ohkubo, M.

    1986-01-01

    JT-60 power tests were carried out, to demonstrate, in advance of actual plasma operation, satisfactory performance of the tokamak machine, power suppliers and control system in combination. The tests began with low power ones of individual coil systems, progressed to full power ones and concluded successfully. The present paper describes the principal results of JT-60 power tests from mechanical and thermal viewpoints of tokamak machine. All of the coil systems were raised up to full power operation in combination and system performance was verified including thermal and mechanical integrity of tokamak machine. Measured strain and displacement showed good agreements with those predicted in the design, which was an evidence that electromagnetic loads were supported adequately as expected in the design. Vibration of the vacuum vessel was found to be large up to 48 m/s/sup 2/ and caused excessive vibration of the lateral port gate-valves. A few limitations to machine operation were also made clear quantatively

  19. Ion transport analysis of a high beta-poloidal JT-60U discharge

    International Nuclear Information System (INIS)

    Horton, W.; Tajima, T.; Dong, J.-Q.; Kim, J.-Y.; Kishimoto, Y.

    1997-01-01

    The high beta-poloidal discharge number 17110 in JT-60U (JT-60 Team, IAEA, Vienna, 1993) that developes an internal transport barrier is analysed for the transport of ion energy and momentum. First, the classical ion temperature gradient stability properties are calculated in the absence of sheared plasma flows to establish the L-mode transport level prior to the emergence of the transport barrier. Then the evolving toroidal and poloidal velocity profiles reported by Koide et al (1994 Phys. Rev. Lett. 72 3662) are used to show how the sheared mass flows control the stability and transport. Coupled energy-momentum transport equations predict the creation of a transport barrier. The balance of the steep ion temperature gradient against the magnetic shear and sheared mass flow is calculated for the profiles in the 17110 discharge. (Author)

  20. Review of JT-60U experimental results from February to October, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Renewed theme group organization started from October 1994 for the upcoming experiments in JT-60U. This regime has three theme groups each of which is composed of two sub-theme groups as; (1) Plasma Operation Theme (Leader Y. Neyatani) with Operation Sub-Theme and Disruption Sub-Theme, (2) High Performance (Leader S. Ishida) with Confinement and MHD Sub-Theme and High Energy Particle Sub-Theme and (3) Steady State Theme (Leader A. Sakasai) with Current Drive Sub-Theme and Divertor Sub-Theme. The main results from the JT-60U experiments in 1995 are summarized in the overviews of the three theme group activities. (J.P.N.).

  1. Fabrication and performance tests of a prototype in-situ coating machine for JT-60

    International Nuclear Information System (INIS)

    Obara, Kenjiro; Abe, Tetsuya; Murakami, Yoshio

    1987-09-01

    Prior to the design and construction of the JT-60's in-situ coating device, a prototype machine was fabricated and tested to confirm the applicability of proposed driving methods and mechanical elements to the device which would be operated in very severe conditions including high ambient temperature and high vacuum. The machine basically consists of an in-vessel manipulator, a fiberscope and an ohmically heated titanium evaporator. From the test results, we recommended to use the combination of Inconel 625 and a self-lubricating alloy for the solid-lubricated bearings and MoS 2 -coated Inconel 625 for the solid-lubricated gears. It was also found that TiC coating showed a effect for the prevention of welding between bolts and nuts. In order to optimize the operating parameters of the machine, many wall inspection tests and titanium evaporation tests were carried out in a large vacuum vessel by simulating the JT-60 conditions. (author)

  2. Development of Gyrotron and JT-60U EC heating system for fusion reactor

    International Nuclear Information System (INIS)

    Sakamoto, K.; Kasugai, A.; Ikeda, Yo.

    2003-01-01

    The progress of ECH technology, for ITER and JT-60U tokamak, are presented. In the development of gyrotron, 0.9MW/9.2sec, 0.5MW/30sec, 0.3MW/60sec, etc. have been demonstrated at 170GHz. At 110GHz, 1.3MW/1.2sec, 1.2MW/4.1sec, 1MW/5sec were obtained. It is found that the reduction of the stray radiation and the enhancement of cooling capability are keys for CW operation. Four 110GHz gyrotrons are under operation in the ECH system of JT-60U. The power up to approximately 3MW/2.7sec was injected into the plasma through the poloidally movable mirrors, and contributed to the electron heating up to 26keV(n e ∼0.5x10 13 cm -3 ), and the suppression of the neo-classical tearing mode. (author)

  3. Development of gyrotron and JT-60U EC heating system for fusion reactor

    International Nuclear Information System (INIS)

    Sakamoto, K.; Kasugai, A.; Ikeda, Yo.

    2003-01-01

    The progress of ECH technology, for ITER and JT-60U tokamak, are presented. In the development of gyrotron, 0.9MW/9.2sec, 0.5MW/30sec, 0.3MW/60sec, etc. have been demonstrated at 170GHz. At 110GHz, 1.3MW/1.2sec, 1.2MW/4. 1sec. 1MW/5sec were obtained. It is found that the reduction of the stray radiation and the enhancement of cooling capability are keys for CW operation. Four 110GHz gyrotrons are under operation in the ECH system of JT-60U. The power up to approximately 3MW/2.7sec was injected into the plasma through the poloidally movable mirrors, and contributed to the electron heating up to 26keV(n e ∼0.5x10 13 cm -3 ), and the suppression of the neo-classical tearing mode. (author)

  4. Advanced control scenario of high-performance steady-state operation for JT-60 superconducting tokamak

    International Nuclear Information System (INIS)

    Tamai, H.; Kurita, G.; Matsukawa, M.; Urata, K.; Sakurai, S.; Tsuchiya, K.; Morioka, A.; Miura, Y.M.; Kizu, K.; Kamada, Y.; Sakasai, A.; Ishida, S.

    2004-01-01

    Plasma control on high-β N steady-state operation for JT-60 superconducting modification is discussed. Accessibility to high-β N exceeding the free-boundary limit is investigated with the stabilising wall of reduced-activated ferritic steel and the active feedback control of the in-vessel non-axisymmetric field coils. Taking the merit of superconducting magnet, advanced plasma control for steady-state high performance operation could be expected. (authors)

  5. Power and particle control in JT-60SA to support and supplement ITER and DEMO

    International Nuclear Information System (INIS)

    Sakurai, Shinji

    2007-01-01

    JT-60 is planned to be modified as a fully superconducting coil tokamak (JT-60 Super Advanced, JT-60SA). Divertor targets are water-cooled to handle heat flux up to 15 MW/m 2 . JT-60SA allows exploitation of high beta regime with stabilizing shell covered with ferritic plates and internal resistive wall mode (RWM) stabilizing coils. A remote handling system is equipped to maintain in-vessel components even for high dose rate due to a substantial annual neutron production. Divertor cassettes are introduced to be maintained by a remote handling. In the present design, a monoblock type carbon fibre composite (CFC) divertor target will be used to withstand a heat load of ∼15 MW/m 2 . CFC divertor targets and other bolted armor tiles will be mounted on the divertor cassette. All of the plasma facing components including the first wall armor are water-cooled to handle heat load during 100s or more. Divertor heat load and pumping efficiency for an ITER-like configuration has been evaluated, using 2D plasma fluid (SOLDOR) and neutral Monte-Carlo (NEUT2D) code. The pumping speed of 50 m 3 /s is specified at an albedo for neutrals in front of the in-vessel cryopanel. In the simulation for the divertor with a V -shaped corner' like as that in ITER, the plasma detachment occurs near the outer-strike point within the 'V-shaped corner', as well as near the inner-strike point, which results in low peak heat flux density 5.8 MW/m 2 for the case with additional gas puff of 5x10 21 /s compared to 11.4 MW/m 2 for the case without 'V-shaped corner'. (author)

  6. Quench propagation and quench detection in the TF system of JT-60SA

    International Nuclear Information System (INIS)

    Lacroix, Benoit; Duchateau, Jean-Luc; Meuris, Chantal; Ciazynski, Daniel; Nicollet, Sylvie; Zani, Louis; Polli, Gian-Mario

    2013-01-01

    Highlights: • The JT-60SA primary quench detection system will be based on voltage measurements. • The early quench propagation was studied in the JT-60SA TF conductor. • The impact of the conductor jacket on the hot spot criterion was quantified. • The detection parameters were investigated for different quench initiations. -- Abstract: In the framework of the JT-60SA project, France and Italy will provide to JAEA 18 Toroidal Field (TF) coils including NbTi cable-in-conduit conductors. During the tokamak operation, these coils could experience a quench, an incidental event corresponding to the irreversible transition from superconducting state to normal resistive state. Starting from a localized disturbance, the normal zone propagates along the conductor and dissipates a large energy due to Joule heating, which can cause irreversible damages. The detection has to be fast enough (a few seconds) to trigger the current discharge, so as to dump the stored magnetic energy into an external resistor. The JT-60SA primary quench detection system will be based on voltage measurements, which are the most rapid technology. The features of the detection system must be adjusted so as to detect the most probable quenches, while avoiding inopportune fast safety discharges. This requires a reliable simulation of the early quench propagation, performed in this study with the Gandalf code. The conductor temperature reached during the current discharge must be kept under a maximal value, according to the hot spot criterion. In the present study, a hot spot criterion temperature of 150 K was taken into account and the role of each conductor component (strands, helium and conduit) was analyzed. The detection parameters were then investigated for different hypotheses regarding the quench initiation

  7. Magnetic Fluctuations during plasma current rise of divertor discharge in JT-60

    International Nuclear Information System (INIS)

    Ushigusa, Kenkichi; Kikuchi, Mitsuru; Hosogane, Nobuyuki; Tsuji, Syunji; Hayashi, Kazuo.

    1986-03-01

    During a current rise phase in the JT-60 divertor discharge, a series of magnetic fluctuations which do not rotate poloidally (phase-locking) is observed. They cause a cooling of plasma periphery and an enhancement of H α emission in the divertor chamber. A significant increase in β P + 1 i /2 with minor disruptions during the phase-locked magnetic fluctuation suggests a relaxation of the current profile in the current rise phase of the divertor discharge. (author)

  8. Manufacturing of central control system of 'JT-60' a plasma feasibility experiment device

    International Nuclear Information System (INIS)

    Kondo, Ikuo; Kimura, Toyoaki; Murai, Katsuji; Iba, Daizo; Takemaru, Koichi.

    1984-01-01

    For constructing a critical-plasma-experiment apparatus JT-60, it was necessary to develop a new control system which enables to operate safely and smoothly a large scale nuclear fusion apparatus and to carry out efficient experiment. For the purpose, the total system control facility composed of such controllers as CAMAC system, timing system and protective interlock panel with multi-computer system as the core was developed. This system generalizes, keeps watch on and controls the total facilities as the key point of the control system of JT-60, and allows flexible operation control corresponding to the diversified experimental projects. At the same time, it carries out the fast real-time control of high temperature, high density plasma. In this paper, the system constitution, function and the main contents of development of the total system control facility are reported. JT-60 is constructed to attain the critical plasma condition as the premise of nuclear fusion reactors and to scientifically verify controlled nuclear fusion. Plasma expe riment will be started in April, 1985. The real-time control of plasma for carrying out high beta operation is planned, intending to develop future economical practical reactors. (Kako, I.)

  9. Study of neutral particle behavior and particle confinement in JT-60U

    International Nuclear Information System (INIS)

    Takenaga, Hidenobu; Shimizu, Katsuhiro; Asakura, Nobuyuki; Shimada, Michiya; Kikuchi, Mitsuru; Tsuji-Iio, Shunji; Uchino, Kiichiro; Muraoka, Katsunori.

    1995-07-01

    In order to understand the particle confinement properties in JT-60U, the particle confinement time was estimated through analyses of the neutral particle behavior. First, the neutral particle transport simulation code DEGAS using a Monte-Carlo technique was combined with the simple divertor code for calculating the edge plasma parameters, and was developed to calculate under the experimental conditions in JT-60U. Then, the charged particle source in the main plasma due to the ionization of the neutral particles was evaluated from the analyses of the neutral particle penetration to the main plasma based on results of the simulation code and measurements of D α emission intensities. Finally, the particle confinement time was estimated from the analysis of particle balance. The analyses were performed systematically for the L-mode plasma and H-mode plasma of JT-60U, and a data base of the particle confinement time was obtained. The dependence of the particle confinement time on the plasma parameters and the relationship between the properties of the particle confinement and the energy confinement were examined. (author)

  10. Impurity and particle recycling reduction by boronization in JT-60U

    International Nuclear Information System (INIS)

    Higashijima, S.; Sugie, T.; Kubo, H.; Tsuji, S.; Shimada, M.; Asakura, N.; Hosogane, N.; Kawano, Y.; Nakamura, H.; Itami, K.; Sakasai, A.; Shimizu, K.; Ando, T.; Saidoh, M.

    1995-01-01

    In JT-60U boronization using decaborane was carried out. Boronization reduced the oxygen impurity in OH discharges and shortened the wall conditioning after the vacuum vessel vent and consequently enabled JT-60U to produce clean plasmas easily except for NB heated plasmas. After boronization, particle recycling was reduced drastically in OH and NB discharges. High confinement plasmas were obtained including high β p mode and H-mode discharges. In the latest boronization part of divertor plates were replaced with B 4 C coated tiles with a B 4 C thickness similar 300 μm. After introducing B 4 C divertor tiles, an explosive generation of boron particles from the tiles was observed. By the combined effects of boronization with decaborane and boron generation from B 4 C tiles, oxygen impurity was so low that oxygen line signals were reduced to noise levels after the latest boronization. On the other hand, boron burst from the B 4 C tiles restricted the operation of JT-60U. ((orig.))

  11. Energetic particle physics in JT-60U and JFT-2M

    Energy Technology Data Exchange (ETDEWEB)

    Shinohara, K [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Takechi, M [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Ishikawa, M [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Kusama, Y [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Tsuzuki, K [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Urata, K [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Kawashima, H [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Tobita, K [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Fukuyama, A [Department of Nuclear Engineering, Kyoto University, 606-8501, (Japan); Cheng, C Z [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, NJ 08543 (United States); Darrow, D S [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, NJ 08543 (United States); Kramer, G J [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, NJ 08543 (United States); Gorelenkov, N N [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, NJ 08543 (United States); Nazikian, R [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, NJ 08543 (United States); Todo, Y [National Institute for Fusion Science, Oroshi-cho, Toki, Gifu, 509-5292, (Japan); Miura, Y [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Ozeki, T [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan)

    2004-07-01

    Recent energetic particle physics research in JT-60U and JFT-2M is reported. Alfven eigenmodes (AEs) are investigated in reversed-shear (RS) plasmas in JT-60U where frequency sweeping (FS) modes are observed to follow the q-profile evolution. The RS-induced AE model can explain the FS of the modes within the context of an evolving q-profile. Enhanced energetic ion transport is also investigated with the appearance of modes in the toroidicity-induced AE range of frequency in JT-60U using a multi-channel neutron profile monitor and in JFT-2M using a lost ion probe. Additionally, the ripple loss in the complex toroidal field ripple due to ferritic steel inserts in JFT-2M is shown and compared with model analysis. The simulation code developed to predict ripple loss in JFT-2M will be of use in estimating the heat flux in the complex ripple field of a future device such as ITER.

  12. Optical design for divertor Thomson scattering system for JT-60SA

    International Nuclear Information System (INIS)

    Kajita, Shin; Enokuchi, Akito; Hatae, Takaki; Itami, Kiyoshi; Hamano, Takashi; Kado, Shinichiro; Ohno, Noriyasu; Takeyama, Norihide

    2014-01-01

    Highlights: •A detailed designing for collection optical system of divertor Thomson scattering system in JT-60SA is conducted. •The assessment of the density and temperature errors of the measurement system is conducted. •It is shown that the measurement could be done with the temperature error of 50% when the density was 10 20 m −3 . •The availability of the laser transmission mirrors for the measurement system is discussed. •Several guidelines to improve the measurement system are discussed. -- Abstract: Optical design for divertor Thomson scattering system in JT-60SA has been conducted. The measurement system will use a Nd:YAG laser at 1064 nm, and scattered photons are collected by a collection optical system. The collection optics consists of primary mirror, secondary mirror, relay optics, and fiber collection optics. The laser transmission mirror and collection optics were designed to be installed in a slender lower port of JT-60SA. The assessment of the measurement errors in temperature was conducted for the designed collection optical system. Because of spatial limitation, the solid angle from the measurement points would be small especially for the measurement points in high field side, and consequently, the temperature errors in the high field side would be considerably large. The effects of several improvements on the error are discussed. Moreover, an assessment for the in-vessel laser transmission metallic mirrors is conducted for the present design

  13. Parametric thermo-hydraulic analysis of the TF system of JT-60SA during fast discharge

    International Nuclear Information System (INIS)

    Polli, Gian Mario; Lacroix, Benoit; Zani, Louis; Besi Vetrella, Ugo; Cucchiaro, Antonio

    2013-01-01

    Highlights: • We modeled the central clock-wise pancake of JT-60SA TF magnet at the EOB. • We simulated a quench followed by a fast discharge. • We evaluated the temperature and pressure rises in the nominal configuration. • We evaluated the effect of several parameter changes on the thermal-hydraulic response of the system. -- Abstract: The evolution of the conductor temperature and of the helium pressure of the central pancake of the TF superconducting magnet of the JT-60SA tokamak in a quench scenario are here discussed. The quench is triggered by a heat disturbance applied at the end of burning and followed by a fast safety discharge. A parametric study aimed at assessing the robustness of the calculation is also addressed with special regard to the voltage threshold, used to define the occurrence of the quench, and to the time delay, that cover all the possible delays in the fast discharge after quench detection. Finally, due to sensitivity analyses the influences of different parameters were assessed: the material properties of the strands (RRR, copper fraction), the magnitude and the spatial length of the triggering disturbance and the magnetic field distribution. The numerical evaluations were performed in the framework of the Broader Approach Agreement in collaboration with CEA, ENEA and the JT-60SA European Home Team using the 1D code Gandalf [1

  14. Design study of an AC power supply system in JT-60SA

    International Nuclear Information System (INIS)

    Shimada, Katsuhiro; Baulaigue, Olivier; Cara, Philippe; Coletti, Alberto; Coletti, Roberto; Matsukawa, Makoto; Terakado, Tsunehisa; Yamauchi, Kunihito

    2011-01-01

    In the initial research phase of JT-60SA, which is the International Thermonuclear Experimental Reactor (ITER) satellite Tokamak with superconducting toroidal and poloidal magnetic field coils, the plasma heating operation of 30 MW-60 s or 20 MW-100 s is planned for 5.5 MA single null divertor plasmas. To achieve this operation, AC power source of the medium voltage of 18 kV and ∼7 GJ has to be provided in total to the poloidal field coil power supplies and additional heating devices such as neutral beam injection (NBI) and electron cyclotron radio frequency (ECRF). In this paper, the proposed AC power supply system in JT-60SA was estimated from the view point of available power, and harmonic currents based on the standard plasma operation scenario during the initial research phase. This AC power supply system consists of the reused JT-60 power supply facilities including motor generators with flywheel, AC breakers, harmonic filters, etc., to make it cost effective. In addition, the conceptual design of the upgraded AC power supply system for the ultimate heating power of 41 MW-100 s in the extended research phase is also described.

  15. Conceptual design of divertor cassette handling by remote handling system for JT-60SA

    International Nuclear Information System (INIS)

    Hayashi, Takao; Sakurai, Shinji; Masaki, Kei; Tamai, Hiroshi; Yoshida, Kiyoshi; Matsukawa, Makoto

    2007-01-01

    The JT-60SA aims to contribute and supplement ITER toward DEMO reactor based on tokamak concept. One of the features of JT-60SA is its high power long pulse heating, causing the large annual neutron fluence. Because the expected dose rate at the vacuum vessel (VV) may exceed 1 mSv/hr after 10 years operation and three month cooling, the human access inside the VV is prohibited. Therefore a remote handling (RH) system is necessary for the maintenance and repair of in-vessel components. This paper described the RH system of JT-60SA, especially the expansion of the RH rail and exchange of the divertor modules. The RH rail is divided into nine and three-point mounting. The nine sections can cover 225 degrees in toroidal direction. A divertor module, which is 10 degrees wide in toroidal direction and weighs 500kg itself due to the limitations of port width and handling weight, can be exchanged by heavy weight manipulator (HWM). The HWM brings the divertor module to the front of the other RH port, which is used for supporting the rail and/or carrying in and out equipments. Then another RH device receives and brings out the module by a pallet installed from outside the VV. (author)

  16. Conceptual design of divertor cassette handling by remote handling system of JT-60SA

    International Nuclear Information System (INIS)

    Hayashi, Takao; Sakurai, Shinji; Masaki, Kei; Tamai, Hiroshi; Yoshida, Kiyoshi; Matsukawa, Makoto

    2008-01-01

    The JT-60SA aims to contribute and supplement ITER toward demonstration fusion reactor based on tokamak concept. One of the features of JT-60SA is its high power long pulse heating, causing the large annual neutron fluence. Because the expected dose rate at the vacuum vessel (VV) may exceed 1 mSv/hr after 10 years operation and three month cooling, the human access inside the VV is restricted. Therefore a remote handling (RH) system is necessary for the maintenance and repair of in-vessel components. This paper described the RH system of JT-60SA, especially the expansion of the RH rail and exchange of the divertor cassettes. The RH rail is divided into nine and three-point mounting. The nine sections can cover 225 degrees in toroidal direction. A divertor cassette, which is 10 degrees wide in toroidal direction and weighs 500 kg itself due to the limitations of port width and handling weight, can be exchanged by heavy weight manipulator (HWM). The HWM brings the divertor cassette to the front of the other RH port, which is used for supporting the rail and/or carrying in and out equipments. Then another RH device receives and brings out the cassette by a pallet installed from outside the VV. (author)

  17. Mechanism of vertical displacement events in JT-60U disruptive discharges

    International Nuclear Information System (INIS)

    Nakamura, Y.; Yoshino, R.; Neyatani, Y.; Tsunematsu, T.; Azumi, M.; Pomphrey, N.; Jardin, S.C.

    1996-01-01

    Enhanced vertical displacement events (VDEs), which are frequently observed in JT-60U disruptive discharges, are investigated using the Tokamak Simulation Code (TSC). The rapid plasma current quench can accelerate the vertical displacement, owing to both the up/down asymmetry of the eddy current distribution arising from the asymmetric geometry of the JT-60U vacuum vessel and the degradation of magnetic field decay index n, leading to high growth rates of positional instability. For a slightly elongated configuration (n = -0.9), the asymmetry of attractive forces on the toroidal plasma plays a dominant role in the VDE mechanism. For a more elongated configuration (n = -1.7), the degradation of field decay index n plays an important role on VDEs, in addition to the effect of asymmetric attractive forces. It is shown that the VDE characteristics of a highly elongated configuration with a rapid plasma current quench can be dominated by the field decay index degradation. It is also pointed out that both the softening of current quenches as was experimentally developed in the JT-60U tokamak, and the optimization of the allowable elongation of the plasma cross-section are critical issues in the development of a general control strategy of discharge termination. (author). 21 refs, 10 figs

  18. ASDEX Upgrade-JT-60U comparison and ECRH power requirements for NTM stabilization in ITER

    International Nuclear Information System (INIS)

    Urso, L.; Zohm, H.; Maraschek, M.; Poli, E.; Isayama, A.

    2010-01-01

    Neoclassical tearing modes (NTMs) are experimentally controlled with local electron cyclotron current drive (ECCD) and the island width decay during NTM stabilization is modelled using the so-called modified Rutherford equation (MRE). In this paper, a modelling of the MRE is carried out and simulations of the island width decay are compared with the experimentally observed ones in order to fit the two free machine-independent parameters present in the equation. A systematic study on a database of NTM stabilization discharges from ASDEX Upgrade and JT-60U is done for extrapolating the ECCD power requirements for ITER. The extrapolation to ITER of the NTM stabilization results from ASDEX Upgrade and JT-60U shows that 10 MW of ECCD power are enough to stabilize large NTMs. The 10 MW power estimate for ITER is based on the assumption that the free parameters in the MRE are machine independent. Indeed, this assumption is verified in this paper for ASDEX Upgrade and JT-60U. An interesting consequence of the relatively modest power requirement for ITER is that the installed 20 MW will suffice for simultaneous 2/1 and 3/2 NTM stabilization.

  19. Progress of data processing system in JT-60 utilizing the UNIX-based workstations

    International Nuclear Information System (INIS)

    Sakata, Shinya; Kiyono, Kimihiro; Oshima, Takayuki; Sato, Minoru; Ozeki, Takahisa

    2007-07-01

    JT-60 data processing system (DPS) possesses three-level hierarchy. At the top level of hierarchy is JT-60 inter-shot processor (MSP-ISP), which is a mainframe computer, provides communication with the JT-60 supervisory control system and supervises the internal communication inside the DPS. The middle level of hierarchy has minicomputers and the bottom level of hierarchy has individual diagnostic subsystems, which consist of the CAMAC and VME modules. To meet the demand for advanced diagnostics, the DPS has been progressed in stages from a three-level hierarchy system, which was dependent on the processing power of the MSP-ISP, to a two-level hierarchy system, which is decentralized data processing system (New-DPS) by utilizing the UNIX-based workstations and network technology. This replacement had been accomplished, and the New-DPS has been started to operate in October 2005. In this report, we describe the development and improvement of the New-DPS, whose functions were decentralized from the MSP-ISP to the UNIX-based workstations. (author)

  20. Vacuum pumping system for the JT-60 radio-frequency heating system

    International Nuclear Information System (INIS)

    Yokokura, Kenji; Ikeda, Yoshitaka; Imai, Tuyoshi; Suganuma, Kazuaki; Nagashima, Takashi

    1988-01-01

    The basic design requirements set up for the JT-60 radio-frequency heating system included: (1) rapid pumping of gas released upon application of a radio-frequency power to maintain the pressure in the launchers at 10 -2 - 10 -3 Pa or less, (2) incorporation of a gas analysis system that can operate under a strong field and high pressure (>10 -2 Pa) to permit remote controlled data collection and processing, and (3) low cost, multiple functions and high reliability. The vacuum pumping system, consisting of three units for low hybrid radio-frequency (LHRF) and one unit for ion cyclotron radio-frequency (ICRF), is connected to each launcher provided at the four ports of JT-60. The LHRF unit is composed of a main pump, an alumina joint for electrical insulation from the launcher, a metallic gate valve for isolation from the JT-60 vacuum region, and various vacuum gauges. Only a turbo-molecular pump is used for the ICRF system because a large-scale differential pumping is not required. A gas measuring system is incorporated which consists of a mass filter, personal computer, turbo-molecular pump, and variable flow valve equipped with an APG control. This system is designed to identify and make use of gas impurities released during the launcher aging process. The control system employed consists of a personal computer, interlock control board, data logger and other devices such as vacuum gages. (Nogami, K.)

  1. Very fast feedback control of coil-current in JT-60 tokamak

    International Nuclear Information System (INIS)

    Aoyagi, T.; Terakado, T.; Takahashi, M.; Nobusaka, H.; Yagyu, J.; Matsuzaki, Y.

    1992-01-01

    A direct digital control (DDC) system is adopted for controlling thyristor converters of power supplies in the JT-60 tokamak built in 1984. Microcomputers of the DDC were 5 MHz i8086 microprocessor and programs were written by assembler language and the processing time was under 1ms. They were, however, too old in hardware and too complicated in software. New DDC system has been made in the JT-60 Upgrade (JT-60U) to control the power supplies more quickly under 0.25 and 0.5 ms of the processing time and also to write the programs used by high-level language. The new system consists of a host computer and five microcomputers with microprocessor on VME bus system. The host computer AS3260 performs on-line processing such as setting the DDC under the discharge conditions and so on. Functions of the microcomputers with a 32-bit, 20 MHz microprocessor MC68030, whose OS are VxWorks and programs are written by C language, are real-time processing such as taking in instructions from a ZENKEI computer and in feedback control of currents and voltages of coils every 0.25 and 0.5 ms. The system is now operating very smoothly. (author)

  2. Pierre Lapie and the Roman road net work in Moesia

    Directory of Open Access Journals (Sweden)

    Florin-Gheorghe Fodorean

    2016-06-01

    Full Text Available In the Festschrift zum 70. Geburtstag von Anthony R. Birley, Richard Talbert published an article about a map which, as the author affirms, skipped the attention of the historians. In fact, it is a set of nine maps, at a scale of approximately 1:3,400,000, illustrating, according to a modern representation, the Roman world. The geographical space represented starts from the Antonine Wall and Britain in the left side and ends to Hierasycaminos on the border between Egypt and Nubia. The maps are part of a two volume project, commissioned by Agricol Fortia d’Urban (1756-1843. The book, entitled Recueil des Itinéraires Anciens comprenant l’Itinéraire d’Antonin, la Table de Peutinger et un choix des périples grecs, avec dix cartes dressées par M. le Colonel Lapie, was published in 1845 by the Imprimerie Royale, Paris. The maps were created by one of the most famous French cartographer of the XIXth century, Pierre M. Lapie (1799-1850. Our study discusses the information from this maps regading Moesia and the accuracy of the cartographer during the process of mapping the Roman roads from the south-danubian province.

  3. Les je gigognes du roman célinien

    Directory of Open Access Journals (Sweden)

    Gregor Perko

    2008-12-01

    Full Text Available Le présent article se penchera sur des aspects narratologiques des trois derniers romans de l’écrivain français Louis-Ferdinand Céline (1894–1961, d’un château l’autre (1957, nord (1960 et rigodon (publication posthume en 1964. Les romans, que la tradition critique solidement établie réunit en trilogie allemande,1 présentent l’aboutissement des recherches poétiques de l’écrivain tant au niveau du style qu’au niveau des techniques narratives. L’analyse qui s’appuiera pour l’essentiel sur le modèle narratologique de Gérard Genette (Genette 1972, 1983 se centrera sur différentes valeurs du je célinien :   –      je comme instance(s narrative(s, –      je comme foyer(s de perception, –      je comme personnage(s romanesque(s.

  4. Evolution of adoption from Roman law to modern law

    Directory of Open Access Journals (Sweden)

    Kitanović Tanja

    2013-01-01

    Full Text Available The work is dedicated to the evolution of adoption practice from ancient Roman law to modern law. Adoption represents ancient social and legal practice which has during time changed manifestations and the causes it served. Adoption in ancient Rome served the interests of pater familias without biological posterity. Adoption practice benefited the continuance of families and the family cult of adopters, whose family lines, with no natural posterity, were threatened to become extinct. After the stagnation in the feudal epoch, adoption was reaffirmed in the bourgeois law. Civil codes in European countries, whose legal systems were built on the foundations of the ancient Roman legal tradition, originally favoured the interests of individuals with no biological children, who were granted to extend their families by adopting, and hence transfer their assets on the obtained heirs. After the wars in the 20th century, which led to a rapid increase in the number of parentless children, the concept of adoption was radically changed, so that since that time the adoption has primarily served the interests of the adopted children and the care for them in the adoptive families. Adoption becomes a form of a social, legal family protection of children without adequate parental care, and that is the most desirable form to provide for children, for the adoptee completely integrates with the adoptive family and takes the right of the born child, where the family environment provides and encourages the optimal mental and physical development of the child.

  5. Tests of a Roman Pot Prototype for the TOTEM Experiment

    CERN Document Server

    Deile, M.; Anelli, G.M.; Antchev, G.A.; Ayache, M.; Caspers, F.; Dimovasili, E.; Dinapoli, R.; Drouhin, F.D.; Eggert, K.; Escourrou, L.; Fochler, O.; Gill, K.; Grabit, R.; Haug, F.; Jarron, P.; Kaplon, J.; Kroyer, T.; Luntama, T.; Macina, D.; Mattelon, E.; Mirabito, L.; Niewiadomski, H.; Noschis, E.P.; Oriunno, M.; Park, A.; Perrot, A.L.; Pirotte, O.; Quetsch, J.M.; Regnier, F.; Ruggiero, G.; Saramad, S.; Siegrist, P.; Snoeys, W.; Souissi, T.; Szczygiel, R.; Troska, J.; Vasey, F.; Verdier, A.; Avati, V.; Jarvinen, M.; Kalliokoski, M.; Kalliopuska, J.; Kurvinen, K.; Lauhakangas, R.; Oljemark, F.; Orava, R.; Palmieri, V.; Saarikko, H.; Soininen, A.; Osterberg, K.; Berardi, V.; Catanesi, M.G.; Radicioni, E.; Boccone, V.; Bozzo, M.; Buzzo, A.; Cuneo, S.; Ferro, F.; Macri, M.; Minutoli, S.; Morelli, A.; Musico, P.; Negri, M.; Santroni, A.; Sette, G.; Sobol, A.; Da Via, C.; Hasi, J.; Kok, A.; Watts, S.; Kasper, J.; Kundrat, V.; Lokajicek, M.; Smotlacha, J.

    2005-01-01

    The TOTEM collaboration has developed and tested the first prototype of its Roman Pots to be operated in the LHC. TOTEM Roman Pots contain stacks of 10 silicon detectors with strips oriented in two orthogonal directions. To measure proton scattering angles of a few microradians, the detectors will approach the beam centre to a distance of 10 sigma + 0.5 mm (= 1.3 mm). Dead space near the detector edge is minimised by using two novel "edgeless" detector technologies. The silicon detectors are used both for precise track reconstruction and for triggering. The first full-sized prototypes of both detector technologies as well as their read-out electronics have been developed, built and operated. The tests took place first in a fixed-target muon beam at CERN's SPS, and then in the proton beam-line of the SPS accelerator ring. We present the test beam results demonstrating the successful functionality of the system despite slight technical shortcomings to be improved in the near future.

  6. Tests of a Roman Pot prototype for the TOTEM experiment

    Science.gov (United States)

    Deile, M.; Alagoz, E.; Anelli, G.; Antchev, G.; Ayache, M.; Caspers, F.; Dimovasili, E.; Dinapoli, R.; Drouhin, F.; Eggert, K.; Escourrou, J.L; Fochler, O.; Gill, K.; Grabit, R.; Haung, F.; Jarron, P.; Kaplon, J.; Kroyer, T.; Luntama, T.; Macina, D.; Mattelon, E.; Niewiadomski, H.; Mirabito, L.; Noschis, E.P.; Oriunno, M.; Park, a.; Perrot, A.-L.; Pirotte, O.; Quetsch, J.M.; Regnier, F.; Ruggiero, G.; Saramad, S.; Siegrist, P.; Snoeys, W.; sSouissi, T.; Szczygiel, R.; Troska, J.; Vasey, F.; Verdier, A.; Da Vià, C.; Hasi, J.; Kok, A.; Watts, S.; Kašpar, J.; Kundrát, V.; Lokajíček, M.V.; Smotlacha, J.; Avati, V.; Järvinen, M.; Kalliokoski, M.; Kalliopuska, J.; Kurvinen, K.; Lauhakangas, R.; Oljemark, F.; Orava, R.; Österberg, K.; Palmieri, V.; Saarikko, H.; Soininen, A.; Boccone, V.; Bozzo, M.; Buzzo, A.; Cuneo, S.; Ferro, F.; Macrí, M.; Minutoli, S.; Morelli, A.; Musico, P.; Negri, M.; Santroni, A.; Sette, G.; Sobol, A.; sBerardi, V.; Catanesi, M.G.; Radicioni, E.

    The TOTEM collaboration has developed and tested the first prototype of its Roman Pots to be operated in the LHC. TOTEM Roman Pots contain stacks of 10 silicon detectors with strips oriented in two orthogonal directions. To measure proton scattering angles of a few microradians, the detectors will approach the beam centre to a distance of 10 sigma + 0.5 mm (= 1.3 mm). Dead space near the detector edge is minimised by using two novel "edgeless" detector technologies. The silicon detectors are used both for precise track reconstruction and for triggering. The first full-sized prototypes of both detector technologies as well as their read-out electronics have been developed, built and operated. The tests took place first in a fixed-target muon beam at CERN's SPS, and then in the proton beam-line of the SPS accelerator ring. We present the test beam results demonstrating the successful functionality of the system despite slight technical shortcomings to be improved in the near future.

  7. Effects of pressure profile and plasma shaping on the n=1 internal kink mode in JT-60/JT-60U pellet fuelled plasmas

    International Nuclear Information System (INIS)

    Ozeki, Takahisa; Azumi, Masafumi

    1990-10-01

    The stability of the n=1 internal kink mode in a tokamak is numerically analyzed for plasmas with a centrally peaked pressure profile. These studies are carried out with the strongly peaked pressure inside the q=1 surface, which is based on the experimentally observed plasmas by means of injections of hydrogen-ice pellets in JT-60 tokamak. The effects of peaked pressure and shaping, i.e., elongation and triangularity, are also studied for JT-60U tokamak. The plasma with the strongly peaked pressure profile has higher critical value of poloidal beta defined within the q=1 surface than that with a parabolic pressure profile. Though the beta limit reduces with the increase of the elongation, the plasma with the peaked pressure profile has larger improvement due to the triangularity than that with the parabolic pressure profile. To access the second stability of the n=1 internal kink mode, the plasma with a flat pressure profile and the large minor radius of the q=1 surface is effective. (author)

  8. Simulation of collisional effects on divertor pumping in JT-60SA

    Energy Technology Data Exchange (ETDEWEB)

    Gleason-González, C., E-mail: cristian.gleason@kit.edu [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, Baden-Württemberg 76344 (Germany); Varoutis, S.; Luo, X. [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, Baden-Württemberg 76344 (Germany); Shimizu, K.; Nakano, T.; Hoshino, K.; Kawashima, H.; Asakura, N. [Japan Atomic Energy Agency, 801-1, Mukoyama, Naka, Ibaraki 311-0193 (Japan); Day, Chr. [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, Baden-Württemberg 76344 (Germany); Sakurai, S. [Japan Atomic Energy Agency, 801-1, Mukoyama, Naka, Ibaraki 311-0193 (Japan)

    2016-11-01

    Highlights: • The exhausted (sub-divertor) gas flows calculations in tokamaks by means of three approaches: ProVac3D, DIVGAS and NEUT2D. • Exhausted neutral gas flow is modeled for two scenarios of a simplified JT-60SA sub-divertor geometry. • A modelled scenario with a simplified setup is done by using two intrinsic collisionless approaches: ProVac3D and NEUT2D and a third approach: DIVGAS, which has been used without its collision module for a direct comparison with the other two. The solvers are cross-checked in terms of the reproduction of the transmission probability. • A second case study is based on the Scenario # 2 of JT-60SA, where the assessment of collisionality in the sub-divertor was done. The gas flow is simulated by using DIVGAS with and without consideration of collisions. • The results include the transmission probability in JT-60SA sub-divertor, the Knudsen number, which characterizes the collisionality of the flow, velocity profiles, pressure and temperature distributions. - Abstract: In this work, the exhausted neutral gas flow is modeled for two cases of a simplified JT-60SA sub-divertor geometry and compared via three different approaches, namely (i) a collisionless approach based on the ProVac3D code, (ii) the DSMC approach based on the DIVGAS code that can be run with and without consideration of particle collisions, and (iii) the NEUT2D approach which has been extensively used in the past for the JT-60 design. In a first case study, the transmission probability was calculated by the 3 approaches and very good agreement is found between NEUT2D-ProVac3D whereas discrepancies between DIVGAS and NEUT2D are found and further analyzed. In the second case, the assessment of collisions is done by means of DIVGAS. Simulations showed that the flow is found in the transitional regime with Kn numbers between 0.1 and 0.4. The DIVGAS collisionless case yielded lower values of temperature than the collisional one by factors of 0.5–0.8 in

  9. 75 FR 1680 - Culturally Significant Objects Imported for Exhibition Determinations: “Roman Art”

    Science.gov (United States)

    2010-01-12

    ... Determinations: ``Roman Art'' SUMMARY: Notice is hereby given of the following determinations: Pursuant to the... FR 19875], I hereby determine that the objects to be included in the exhibition ``Roman Art... that the exhibition or display of the exhibit objects at the Metropolitan Museum of Art, New York, NY...

  10. Wooden combs from the Roman fort at Vechten: the bodily appearance of soldiers

    NARCIS (Netherlands)

    Derks, A.M.J.; Vos, W.K.

    2010-01-01

    Abstract Excavations in the late 19th century and surveys carried out in the 1970s have produced 12 boxwood combs from the Roman fort at Vechten (NL). They are to be considered waste material that was dumped in the river Rhine which in the Roman period ran just north of the camp. In this article,

  11. Road Sign Romanization in Oman: The Linguistic Landscape Close-Up

    Science.gov (United States)

    Jamoussi, Rafik; Roche, Thomas

    2017-01-01

    Throughout the Arab Gulf States, bilingual road signs are the norm, employing both Arabic and a romanized counterpart for the large expatriate population. The existing romanization is inconsistent, with potentially misleading variant spellings of place names signposting the region. This study provides a linguistic analysis of signs on the arterial…

  12. Analysis of the Design Criteria for Ancient Greek and Roman Catapults

    DEFF Research Database (Denmark)

    Paasch, Kasper

    2011-01-01

    This paper will give a short overview of use of COMSOL Multiphysics for analyzing ancient Greek and Roman catapults with the main focus on the energy storing torsion springs. Catapults have been known and used in the Greek and Roman world from around 399 BC and a fully standardized design for pow...

  13. Tikuvõileivaduell / Roman Zaštšerinski ; interv. Jaanus Kulli

    Index Scriptorium Estoniae

    Zaštšerinski, Roman, 1978-

    2008-01-01

    Intervjuu kokk Roman Zaštšerinskiga, kes valmistas koos Imre Kosega ette Vabariigi Presidendi iseseisvuspäeva vastuvõtu menüü. Vt. samas: Roman Zaštšerinski menüü vabariigi presidendi vastuvõtul

  14. Measuring the Contribution of Roman Catholic Secondary Schools to Students' Religious, Personal and Social Values

    Science.gov (United States)

    Village, Andrew; Francis, Leslie J.

    2016-01-01

    Roman Catholic schools have been part of the state-funded system of education in England and Wales since the 1850s. Currently, Roman Catholic schools provide places for around 10% of students attending state-maintained primary and secondary schools. The present study employed data collected during the 1990s to compare a range of religious, social,…

  15. Maritime trade contacts of Odisha, east coast of India with the Roman world: An appraisal

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.; Patnaik, S.K.; Pradhan, G.C.

    The present state of Odisha (previously known as Kalinga, Utkal,Odra and Orissa) lies on the east coast of India, and is known forits maritime contacts with the Roman world since the early histori-cal period, if not earlier. Initially, the Romans...

  16. The TLRR II – Providing Digital Infrastructure to Research Roman Republican Trials

    Directory of Open Access Journals (Sweden)

    Kirsten Jahn

    2016-12-01

    Full Text Available The project Trials in the Late Roman Republic II (TLRR II aims at collecting, organizing, and analyzing information about Roman legal cases in an XML database. M. Alexander published the book “Trials in the Late Roman Republic, 149 BC to 50 BC” (TLRR I in 1990, and initiated the current project that will make Roman republican trials easily accessible with modern technology. For each case a short description is provided, a clear distinction between assumptions and facts is made, and an updated bibliography can be found at the end of each entry. The open access database can serve both as a reference work and as a starting point for further research in Roman Republican history. It could be a connecting link within the developing digital infrastructure for that era.

  17. Comparative Comparison of City and Urbanism during Sassanid Period in Iran and the Ancient Roman

    Directory of Open Access Journals (Sweden)

    Zohre Moqimizade

    2017-02-01

    Full Text Available Sassanid replaced migrating nomads and tribes with urbanization system and concentration of population. Sassanid desire to increase the population was due to the fact that population is the core of urban systems and focus-oriented system. Sassanid tried marching to Syria and Asia Minor to gain population. Immigrant Roman population was accommodated in newly established cities. Romans had structured and deep thinking about urban development, such that their territory was made up of urban units which were connected through a system of roads and bridges. Romans innovation in urban development can be summed up in creating military cities. Sassanid urbanization after the Parthians was influenced by Roman urbanization which is most visible in the shape of Sassanid cities. In this study, while examining cities and urbanization in Sassanid reign and Roman Empire, their influence on each other and their similarities and differences in their urbanization methods were also investigated.

  18. The (in)visibility of the gods in the Greco-Roman world and of God in ...

    African Journals Online (AJOL)

    2015-10-26

    Oct 26, 2015 ... Greco-Roman world and in Hellenistic Judaism when reference was made to ..... Roman poet best known for the Metamorphoses, a 15-book continuous ...... W.A. Oldfather, Harvard University Press, Cambridge, MA, viewed 2.

  19. The Roman and Islamic spice trade: New archaeological evidence.

    Science.gov (United States)

    Van der Veen, Marijke; Morales, Jacob

    2015-06-05

    Tropical spices have long been utilized in traditional medicine and cuisine. New archaeological evidence highlights temporal changes in the nature and scale of the ancient spice trade and in the ancient usage of these plants. Furthermore, a study of their 'materiality' highlights that the impact of spices extends beyond their material properties. Here the botanical remains of spices recovered from archaeological excavations at a port active in the Roman and medieval Islamic spice trade are evaluated. Recent excavations at Quseir al-Qadim, an ancient port located on the Red Sea coast of Egypt, have provided new evidence for the spice trade. Due to the arid conditions ancient botanical remains were preserved in abundance and these included spices, as well as a wide range of other food plants. Quseir al-Qadim was active as a transport hub during both the Roman and Islamic periods (ca. AD 1-250, known as Myos Hormos, and again during ca. AD 1050-1500, known as Kusayr), and the remains thus facilitate a study of temporal change in the trade and usage of these spices. Standard archaeobotanical methods were used to recover, identify and analyze these remains. At least seven tropical spices were recovered from the excavations, as well as several other tropical imports, including black pepper (Piper nigrum), ginger (Zingiber officinale), cardamom (Elettaria cardamomum), turmeric (Curcuma sp.), fagara (cf. Tetradium ruticarpum), myrobalan (Terminalia bellirica and Terminalia chebula) and betelnut (Areca catechu). A marked contrast between the two chronological periods in the range of spices recovered points to changes in the nature and scale of the trade between the Roman and medieval Islamic periods, while differences in the contexts from which they were recovered help to identify temporal changes in the way in which the spices were utilized during those periods. Archaeological and textual evidence suggest that in antiquity spices were used in ritual (funeral rites

  20. Geophysical investigations of the Olonium Roman site (Northern Como Lake)

    Science.gov (United States)

    Arlsan, Ermanno; Biella, Giancarlo; Boniolo, Graziano; Caporusso, Donatella; de Franco, Roberto; Lozej, Alfredo; Veronese, Luigi

    1999-03-01

    The study area is located at S. Agata (Gera Lario), a small center at the northern end of Como Lake, near the junction of Valchiavenna and Valtellina Valleys. This site played a strategic role since ancient times, providing the control on the communications routes to both the Como Lake and the Spluga and Septimer alpine passes. Since the end of the last century archaeological findings are reported in literature, also supported, from the early XI century, by archival documents confirming the existence of the `Olonium' settlement, an administrative and fiscal center of primary importance, as well as a parish amongst the most influential in the Como Lake area. Within an area of 45,000 m 2 an electrical survey has been carried out in conjunction with magnetic and GPR investigations. These studies have indicated the presence of a number of sub-areas characterized by significant anomalies defined by the overlapping of the results obtained from two or more geophysical methods. In two of such sub-areas, excavation tests have been conducted, which have brought to light a number of archaeological findings of interest. In one of the two sub-areas, which is characterized by the superimposition of electrical and radar anomalies, a deposit of large pebbles has been found. The origin of this deposit has not been ascertained, whether it is of fluvial origin, related to the deviation of the Adda river in the Pian di Spagna region in Roman times, or it is part of reclamation works, still of Roman times, of paleolacustrine marshes. The overlapping stratigraphy, however, suggests the development of fluvial channels between Roman and Low-Medieval times. In the other sub-area, excavations were carried out on sites defined by electrical and radar anomalies, and confirmed by the results from magnetic survey. The excavations brought to light, below the fluvial deposits, a large medieval edifice, which could be identified as the S. Stefano church abandoned in 1444. The church is built on

  1. [The Antonine Plague and the decline of the Roman Empire].

    Science.gov (United States)

    Sabbatani, S; Fiorino, S

    2009-12-01

    The Antonine Plague, which flared up during the reign of Marcus Aurelius from 165 AD and continued under the rule of his son Commodus, played such a major role that the pathocenosis in the Ancient World was changed. The spread of the epidemic was favoured by the occurrence of two military episodes in which Marcus Aurelius himself took part: the Parthian War in Mesopotamia and the wars against the Marcomanni in northeastern Italy, in Noricum and in Pannonia. Accounts of the clinical features of the epidemic are scant and disjointed, with the main source being Galen, who witnessed the plague. Unfortunately, the great physician provides us with only a brief presentation of the disease, his aim being to supply therapeutic approaches, thus passing over the accurate description of the disease symptoms. Although the reports of some clinical cases treated by Galen lead us to think that the Antonine plague was caused by smallpox, palaeopathological confirmation is lacking. Some archaeological evidence (such as terracotta finds) from Italy might reinforce this opinion. In these finds, some details can be observed, suggesting the artist's purpose to represent the classic smallpox pustules, typical signs of the disease. The extent of the epidemic has been extensively debated: the majority of authors agree that the impact of the plague was severe, influencing military conscription, the agricultural and urban economy, and depleting the coffers of the State. The Antonine plague affected ancient Roman traditions, also leaving a mark on artistic expression; a renewal of spirituality and religiousness was recorded. These events created the conditions for the spread of monotheistic religions, such as Mithraism and Christianity. This period, characterized by health, social and economic crises, paved the way for the entry into the Empire of neighbouring barbarian tribes and the recruitment of barbarian troops into the Roman army; these events particularly favoured the cultural and

  2. Public statues as a strategy of remembrance in Roman Messene

    DEFF Research Database (Denmark)

    Dickenson, Christopher Paul

    2017-01-01

    once taken place; and the survival of old historic monuments transformed civic centres into museum-like spaces for backward looking introspection. This article challenges this vision and argue that public monuments played a dynamic role in defining relations of power both vis-à-vis Rome and within....... The case study, Messene, is studied using archaeological, epigraphic and literary evidence. Messene is ideally suited for thinking about the range of ways in which monumental space could be used to shape political realities in Greece under the Empire.......Under the Roman Empire the poleis of Greece were setting up honorific statuary monuments with increasing frequency. Statues of emperors and members of the imperial family, of local politicians and benefactors are attested in all areas of public space from agoras to bathhouses, from gymnasia...

  3. Water consumption in Iron Age, Roman, and Early Medieval Croatia.

    Science.gov (United States)

    Lightfoot, E; Slaus, M; O'Connell, T C

    2014-08-01

    Patterns of water consumption by past human populations are rarely considered, yet drinking behavior is socially mediated and access to water sources is often socially controlled. Oxygen isotope analysis of archeological human remains is commonly used to identify migrants in the archeological record, but it can also be used to consider water itself, as this technique documents water consumption rather than migration directly. Here, we report an oxygen isotope study of humans and animals from coastal regions of Croatia in the Iron Age, Roman, and Early Medieval periods. The results show that while faunal values have little diachronic variation, the human data vary through time, and there are wide ranges of values within each period. Our interpretation is that this is not solely a result of mobility, but that human behavior can and did lead to human oxygen isotope ratios that are different from that expected from consumption of local precipitation. © 2014 Wiley Periodicals, Inc.

  4. Des hommes de Laurent Mauvignier : un roman de filiation ?

    Directory of Open Access Journals (Sweden)

    Manet van Montfrans

    2012-12-01

    Full Text Available Des hommes de Laurent Mauvignier est centré sur deux cousins, qui après avoir fait leur service militaire en Algérie, entre 1960 et 1962, sont rentrés dans leur village, marqués à vie par leurs expériences de la guerre. Un incident amène l’un d’eux, narrateur dans la majeure partie du récit, à reconstruire la vie de l’autre, sombré dans la déchéance, et à se remémorer peu à peu leur passé commun. On pourrait considérer ce texte comme « un roman de filiation » même s´il résiste, par le dispositif narratif mis en place par Mauvignier, à cette catégorie générique.

  5. A directed network of Greek and Roman mythology

    Science.gov (United States)

    Choi, Yeon-Mu; Kim, Hyun-Joo

    2007-08-01

    We construct a directed network using a dictionary of Greek and Roman mythology in which the nodes represent the entries listed in the dictionary and we make directional links from an entry to other entries that appear in its explanatory part. We find that this network is clearly not a random network but a directed scale-free network in which the distributions of out-degree and in-degree follow a power-law with exponents γout≈3.0 and γin≈2.5, respectively. Also we measure several quantities which describe the topological properties of the network and compare it to that of other real networks.

  6. Sexual and intimacy health of Roman Catholic priests.

    Science.gov (United States)

    McDevitt, Patrick J

    2012-01-01

    This study explores the sexual experiences and sexual health of Roman Catholic priests. The qualitative research design looked at priests' responses to the question, "Please share one or more sexual experiences in your lifetime." The qualitative responses were analyzed and categorized into seven groupings: (a) Childhood and adolescent homosexual experiences; (b) Childhood and adolescent heterosexual experiences; (c) Both homosexual and heterosexual childhood and adolescent experiences; (d) Adult sexual experiences before ordination to the priesthood; (e) Adult sexual experiences since ordination to the priesthood; (f) Masturbation; and (g) Other sexual experiences. The data were analyzed by frequency of responses and percentages within each of the seven categories. The results indicate the need for early intervention and education during seminary, ongoing education after ordination, and psychotherapy support for priests.

  7. LACTATE PROFILE DURING GRECO-ROMAN WRESTLING MATCH

    Directory of Open Access Journals (Sweden)

    Ognjen Uljevic

    2009-11-01

    Full Text Available The objective of this study was to determine and compare lactate profile of two groups of Greco-Roman wrestlers with different competences and training experience. Study was conducted on 10 wrestles that were members of Croatian national team and 10 wrestlers that were members of Wrestling club Split. Lactate samples were collected at four intervals during control fights that were held according to international wrestling rules of World wrestling federation FILA. Values of lactate increased as competition progressed, and they were highest at the end of the match for both groups of wrestlers. According to this study there were no significant differences in lactate between two groups at the end of the match, while significant differences were noted during the match. The information about lactate profile presented in this study can be used by coaches and wrestlers to develop condition programs

  8. State officials and illicit asset-grabbing: The Roman approach

    Directory of Open Access Journals (Sweden)

    Apsitis A.

    2018-01-01

    Full Text Available The article reflects author’s findings regarding the regulation found in Roman legal sources, which is directed against corruptive activities of persons in public state positions, in particular in relation to unlawful seizure of assets belonging to citizens. Legal mechanisms are examined in relation to cases of force (vis-Latin and fear (metus-Latin application. The Code of Justinian (Codex Iustinianus and The Digest (Digesta contained regulation in relation to interpretation and application of The Julian Law on Extortion (Lex Iulia repetundarum, 59 B.C. in cases of all types of extortion and bribery with the involvement of public office administering persons, including judges and arbitrators, are examined.

  9. 75 FR 3217 - J&T Hydro Company; H. Dean Brooks and W. Bruce Cox; Notice of Application for Transfer of License...

    Science.gov (United States)

    2010-01-20

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 11392-009] J&T Hydro Company; H. Dean Brooks and W. Bruce Cox; Notice of Application for Transfer of License and Soliciting Comments and Motions To Intervene January 12, 2010. On October 30, 2009, J&T Hydro Company (transferor) and...

  10. Web-based Java application to advanced JT-60 Man-Machine Interfacing System for remote experiments

    International Nuclear Information System (INIS)

    Totsuka, Toshiyuki; Suzuki, Yoshio; Sakata, Shinya; Oshima, Takayuki; Iba, Katsuyuki

    2008-01-01

    Since remote participation in ITER experiments is planned, it is expected to demonstrate that the JT-60SA experiment is controlled from a Japanese remote experiment center located in Rokkasho-mura, Aomori-ken, Japan as a part of the ITER-BA project. Functions required for this experiment are monitoring of the discharge sequence status, handling of the discharge parameter, checking of experiment data, and monitoring of plant data, all of which are included in the existing JT-60 Man-Machine Interfacing System (MMIF). The MMIF is now only available to on-site users at the Naka site due to network safety. The motivation for remote MMIF is prompted by the issue of developing and achieving compatibility with network safety. The Java language has been chosen to implement this task. This paper deals with details of the JT-60 MMIF for the remote experiment that has evolved using the Java language

  11. Carbonation kinetics in roman-like lime mortar

    Directory of Open Access Journals (Sweden)

    Sánchez-Moral, S.

    2004-09-01

    Full Text Available The kinetic parameterisation of lime mortar carbonation is a useful technique for understanding ancient building methods and the long-lived physical-chemical stability of roman monuments. Portlandite (Ca(OH2 binders harden in the air on contact with atmospheric CO2, producing CaCO3. Water evaporation and the presence of silicate aggregates have a three-fold effect: prompting the development of a pore system that permits CO2, self-diffusion, reducing shrinkage and cracking during drying and (possibly giving rise to subsequent pozzolanic reactions. The present survey involved air-hardening a series of roman-like lime mortars which differed in terms of: (i type of aggregate, volcanic tephra and arkose; (ii aggregate/binder ratio, 1:2 as used in the catacombs and 1:4 as found in standard roman construction and (iii temperature, the 17 ºC prevailing in underground environments and the 30 ºC typical of warm Mediterranean areas. The analyses that provided the most useful information were performed in a classic X-ray diffractometer adapted to accommodate an author-designed chamber in which temperature control was achieved by an internal refrigerant and a PID-governed electrical heater Additional data were obtained with DTA and environmental scanning electron microscopy (ESEM. The tests conducted on the Roman-like lime mortars manufactured for the experiment showed that the hardening temperature is a critical factor in the initial phases of carbonation. Calcite precipitation rates and total mineral precipitation increased with temperature, but fell very quickly as calcite precipitated. In theoretical calculations assuming an open reactor with continuous CO2, input, total calcitisation time was found to be 156 m in. at 30 ºC and 175 min. at 17 ºC, whilst in the mortars actually hardened in the experimental part of the study, calcitisation gradually blocked the flow or CO2, gas into the

  12. Detailed Analysis of the Transient Voltage in a JT-60SA PF Coil Circuit

    International Nuclear Information System (INIS)

    Yamauchi, K.; Shimada, K.; Terakado, T.; Matsukawa, M.; Coletti, R.; Lampasi, A.; Gaio, E.; Coletti, A.; Novello, L.

    2013-01-01

    A superconducting coil system is actually complicated by the distributed parameters, e.g. the distributed mutual inductance among turns and the distributed capacitance between adjacent conductors. In this paper, such a complicated system was modeled with a reasonably simplified circuit network with lumped parameters. Then, a detailed circuit analysis was conducted to evaluate the possible voltage transient in the coil circuit. As a result, an appropriate (minimum) snubber capacitance for the Switching Network Unit, which is a fast high voltage generation circuit in JT-60SA, was obtained. (fusion engineering)

  13. Tritium distribution on plasma facing graphite tiles of JT-60U

    International Nuclear Information System (INIS)

    Tanabe, T.; Sugiyama, K.; Masaki, K.; Gotoh, Y.; Tobita, K.; Miya, N.

    2003-01-01

    Tritium distributions on the graphite divertor tiles, the dome units and the baffle plates of JT-60U were successfully measured. Poloidally, the highest tritium level was found at the dome top tiles and the outer baffle plates, where the plasma did not hit directly. On the other hand, although the toroidal tritium profiles on each tiles appeared uniform, detailed profiles in full toroidal direction clearly showed a periodic variation corresponding to the position of the magnetic field coils, indicating the ripple loss of high energy tritons as suggested by the OFMC code. Finally, the temperature increase owing to the plasma heat load was found to release the once retained tritium. (author)

  14. Examples of data processing systems. Data processing system for JT-60

    International Nuclear Information System (INIS)

    Aoyagi, Tetsuo

    1996-01-01

    JT-60 data processing system is a large computer complex system including a lot of micro-computers, several mini-computers, and a main-frame computer. As general introduction of the original system configuration has been published previously, some improvements are described here. Transient mass data storage system, network database server, a data acquisition system using engineering workstations, and a graphic terminal emulator for X-Window are presented. These new features are realized by utilizing recent progress in computer and network technology and carefully designed user interface specification of the original system. (author)

  15. Radiation loss and global energy balance of ohmically heated divertor discharge in JT-60 tokamak

    International Nuclear Information System (INIS)

    Koide, Yoshihiko; Yamada, Kimio; Yoshida, Hidetoshi; Nakamura, Hiroo; Niikura, Setsuo; Tsuji, Shunji

    1986-03-01

    Divertor experiment in JT-60 with a small divertor chamber has been successfully performed up to 1.6 MA discharge. Several divertor effects were experimentally confirmed as follows. Radiation loss in main plasma saturates with the increase of plasma current and its ratio to the input power is about 20 % at 1.5 MA. The rest of input power is exhausted into the divertor chamber and a half of it is dissipated as the radiation loss. Impurity accumulation is not observed during a few sec without internal MHD activity and gross impurity confinement time is several hundred msec. (author)

  16. Edge safety factor at the onset of plasma disruption during VDEs in JT-60U

    International Nuclear Information System (INIS)

    Sugihara, Masayoshi; Lukash, Victor; Khayrutdinov, Rustam; Neyatani, Yuzuru

    2004-01-01

    Detailed examinations of the value of the edge safety factor (q a ) at the onset of thermal quench (TQ) during intentional vertical displacement event (VDE) experiments in JT-60U are carried out using two different reconstruction methods, FBI/FBEQU and DINA. The results from the two methods are very similar and show that the TQ occurs when the q a value is in the range between 1.5 and 2. This result suggests that the predictive simulations for VDEs should be performed within this range of q to examine the subsequent differences in the halo currents, plasma movement and other plasma behaviour during the current quench

  17. Particle transport analysis in lower hybrid current drive discharges of JT-60U

    International Nuclear Information System (INIS)

    Nagashima, K.; Ide, S.; Naito, O.

    1996-01-01

    Particle transport is modified in lower hybrid current drive discharges of JT-60U. The density profile becomes broad during the lower hybrid wave injection and the profile change depends on the injected wave spectrum. Particle transport coefficients (diffusion coefficient and profile peaking factor) were evaluated using gas-puff modulation experiments. The diffusion coefficient in the current drive discharges is about three times larger than in the ohmic discharges. The profile peaking factor decreases in the current drive discharges and the evaluated values are consistent with the measured density profiles. (author)

  18. Monte Carlo approach to define the refrigerator capacities for JT-60SA

    International Nuclear Information System (INIS)

    Wanner, Manfred; Barabaschi, Pietro; Lamaison, Valerie; Michel, Frederic; Reynaud, Pascal; Roussel, Pascal

    2011-01-01

    The JT-60SA cryogenic system shall provide refrigeration to keep the superconducting magnets and their structures at 4.4 K, cryo-pumps at 3.7 K, thermal shields at 80-100 K, and deliver a flow of 50 K helium to the current leads. A Monte Carlo method is proposed to determine the capacity contingencies for the refrigeration system. Attributing individual contingencies and distribution probability functions to the design variables allows the different load contributions to be statistically averaged. The total refrigeration contingency is derived for each temperature level from the 95% confidence level of the integrated distribution function.

  19. High Beta Steady State Research and Future Directions on JT-60U and JFT-2M

    Science.gov (United States)

    Ishida, Shinichi

    2003-10-01

    JT-60U and JFT-2M research is focused on high beta steady state operation towards economically and environmentally attractive reactors. In JT-60U, a high-βp H-mode plasma was sustained with βN 2.7 for 7.4 s in which neoclassical tearing modes (NTMs) limited the attainable β_N. Real-time tracking NTM stabilization system using ECCD demonstrated complete suppression of NTM leading to recovery of βN before onset of NTM. Performance in a fully non-inductive H-mode plasma was improved up to n_i(0) τE T_i(0) = 3.1 x 10^20 keV s m-3 using N-NBCD with βN 2.4, HH_y,2=1.2 and bootstrap fraction f_BS 0.5. ECH experiments extended the confinement enhancement for dominantly electron heated reversed shear plasmas up to HH_y,2 2 at T_e/Ti 1.25. A world record ECCD efficiency, 4.2 x 10^18 A/W/m^2, was achieved at Te 23 keV with a highly localized central current density. Innovative initiation and current build-up without center solenoid currents were established by LHCD/ECH and bootstrap current up to f_BS 0.9. In JFT-2M, the inside of the vacuum vessel wall was fully covered with low-activation ferritic steel plates to investigate their use in plasmas near fusion conditions. High βN plasmas were produced up to βN = 3.3 with an internal transport barrier (ITB) and a steady H-mode edge. A new H-mode regime with steady high recycling (HRS) and an ITB was exploited leading to βN H_89P 6.2 at n_e/nG 0.7. In 2003, JT-60U will be able to operate for the duration up to 65 s at 1 MA/2.7 T and the heating/current-drive duration up to 30 s at 17 MW to prolong high-βN and/or high-f_BS discharges with feedback controls. JFT-2M is planning to implement wall stabilization experiments in 2004 to pursue plasmas above the ideal no-wall limit using a ferritic wall. The modification of JT-60 to a fully superconducting tokamak is under discussion to explore high-β steady state operation in collision-less plasmas well above no-wall limit with ferritic wall in a steady state.

  20. Development and upgrade of new real time processor in JT-60 data processing system

    International Nuclear Information System (INIS)

    Sakata, Shinya; Koiwa, Motonao; Matsuda, Toshiaki; Aoyagi, Tetsuo

    2000-07-01

    At the beginning of JT-60 experiments, the real time processor (RTP) in the data processing system was mainly constructed by PANAFACOM U-1500. As the computer became superannuated, however, it gradually became difficult to maintain both hardware and software. A performance of a recent UNIX workstation has been remarkably progressed. The UNIX workstation has a large flexibility for user application programs, an easiness for maintenance of the hardware and an ability of expansion to peripheral devices. Therefore, the RTP system is newly reconstructed by using the UNIX workstation. This report describes the overview, the basic design and the recent upgrade on the RTP in the data processing system. (author)

  1. Divertor characteristics and control on the W-shaped divertor with pump of JT-60U

    International Nuclear Information System (INIS)

    Hosogane, N.; Kubo, H.; Higashijima, S.

    1999-01-01

    Roles of the inner leg pumping and the private dome, which are special features of the W-shaped divertor of JT-60U, have been investigated. The following observations were made: The inner leg pumping functions well in attached states or partially detached states with weak X-point MARFE where the inner particle recycling is enhanced. A combination of main gas puff and inner leg pump is effective in reduction of intrinsic carbon impurity. Geometrical effects of the private dome on transport of hydrocarbons in the private flux region was confirmed by spectroscopic measurements of CD-band intensity profile and impurity transport simulation code using experimental data. (author)

  2. Numerical analysis of gas puff modulation experiment on JT-60U

    International Nuclear Information System (INIS)

    Nagashima, Keisuke; Sakasai, Akira

    1992-03-01

    In tokamak transport physics, source modulation experiments are one of the most effective methods. For an analysis of these modulation experiments, a simple numerical method was developed to solve the general transport equations. This method was applied to gas puff modulation experiments on JT-60U. From the comparison between the measured and calculated density perturbations, it was found that the particle diffusion coefficient is about 0.8 m 2 /sec in the edge region and 0.1-0.2 m 2 /sec in the central region. (author)

  3. Status of the cold test facility for the JT-60SA tokamak toroidal field coils

    Energy Technology Data Exchange (ETDEWEB)

    Abdel Maksoud, Walid, E-mail: walid.abdelmaksoud@cea.fr; Bargueden, Patrick; Bouty, André; Dispau, Gilles; Donati, André; Eppelle, Dominique; Genini, Laurent; Guiho, Patrice; Guihard, Quentin; Joubert, Jean-Michel; Kuster, Olivier; Médioni, Damien; Molinié, Frédéric; Sinanna, Armand; Solenne, Nicolas; Somson, Sébastien; Vieillard, Laurence

    2015-10-15

    Highlights: • The 5 K cryogenic loop includes a 500 W refrigerator and a She cold pump. • The coils are energized thanks to a 25.7 kA power supply and HTS current leads. • Temperature margin tests between 5 K and 7.5 K will be made on each coil. • A magnet safety system protects each double pancake of the coil in case of quench. • Instrumentation is monitored on a 1 Hz to 10 kHz fast acquisition system. - Abstract: JT-60SA is a fusion experiment which is jointly constructed by Japan and Europe and which shall contribute to the early realization of fusion energy, by providing support to the operation of ITER, and by addressing key physics issues for ITER and DEMO. In order to achieve these goals, the existing JT-60U experiment will be upgraded to JT-60SA by using superconducting coils. The 18 TF coils of the JT-60SA device will be provided by European industry and tested in a Cold Test Facility (CTF) at CEA Saclay. The coils will be tested at the nominal current of 25.7 kA and will be cooled with supercritical helium between 5 K and 7.5 K to check the temperature margin against a quench. The main objective of these tests is to check the TF coils performance and hence mitigate the fabrication risks. The most important components of the facility are: a 11.5 m × 6.5 m large cryostat in which the TF coils will be thermally insulated by vacuum; a 500 W helium refrigerator and a valve box to cool the coils down to 5 K and circulate 24 g/s of supercritical helium through the winding pack and through the casing; a power supply and HTS current leads to energize the coil; the control and instrumentation equipment (sensors, PLC's, supervision system, fast data acquisition system, etc.) and the Magnet Safety System (MSS) that protects the coils in case of quench. The paper will give an overview of the design of this large facility and the status of its realization.

  4. Improvement on control system of the JT-60 radio frequency heating system

    Energy Technology Data Exchange (ETDEWEB)

    Shinozaki, Shin-ichi; Moriyama, Shinichi; Hiranai, Shinichi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Sato, Fumiaki [Nippon Advanced Technology Co., Ltd., Tokai, Ibaraki (Japan)

    2003-03-01

    On the JT-60 radio frequency (RF) heating system, the decrease in the activity ratio was a problem because of the deterioration of the control system. To improve the reliability, we replaced CAMAC system for a power injection control system, which was a main cause of the trouble, with the microprocessor system. And, a function of computer supported programming function of RF power injection form was introduced, which contributed to reduce a load of operators. Furthermore, personal computers with network communication were introduced to improve a maintenance ability of the control system. As a result, the activity ratio of the RF heating system was improved significantly. (author)

  5. Design study of a time-of-flight neutron spectrometer for JT-60U

    International Nuclear Information System (INIS)

    Elevant, T.; Hoek, M.; Nishitani, Takeo.

    1993-06-01

    A time-of-flight neutron spectrometer is proposed for measurements of neutron energy spectra from deuterium-deuterium reactions in JT-60U tokamak plasmas. The sensitivity of the instrument is 2 · 10 -2 cm 2 , energy resolution is 4.5 % (FWHM) and maximum useful count-rate is 6 kHz. Analysis of neutron energy spectra will provide information on central ion temperatures larger than ∼ 4 keV with an accuracy of ± 10 %, and neutron source fraction from reactions between thermal ions with an accuracy of ± 15 %. The minimum time required for data acquisition is 0.1 s. (author)

  6. Progress of JT-60SA Project: EU-JA joint efforts for assembly and fabrication of superconducting tokamak facilities and its research planning

    Energy Technology Data Exchange (ETDEWEB)

    Shirai, Hiroshi, E-mail: shirai.hiroshi@jaea.go.jp [JT-60SA Project Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Barabaschi, Pietro [JT-60SA EU-Home Team, Fusion for Energy, Boltsmannstr 2, Garching 85748 (Germany); Kamada, Yutaka [JT-60SA JA-Home Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

    2016-11-01

    Highlights: • JT-60SA Project is promoted under the BA Agreement and JA national programme. • JT-60SA is designed to operate in break-even equivalent condition for a long period. • JT-60SA Project supports and complements the ITER project, and promotes DEMO design. • Fabrication of JT-60SA components and assembly in Naka are steadily going on. • JT-60SA Research Plan has been developed jointly by EU and JA fusion communities. - Abstract: Aiming at supporting the early realization of fusion energy, the JT-60SA Project has shown steady progress for several years toward the first plasma in 2019 under the dual frameworks: the Satellite Tokamak Programme of the Broader Approach Agreement between EU and Japan, and the Japanese national programme. JT-60SA is a superconducting tokamak designed to operate in break-even equivalent conditions for a long pulse duration (typically 100 s) with a maximum plasma current of 5.5 MA. A variety of plasma control capabilities enable JT-60SA to contribute directly to the ITER project and also to DEMO by addressing key engineering and physics issues for advanced plasma operation. Design and fabrication of JT-60SA components, shared by the EU and Japan, started in 2007. Assembly in the torus hall started in January 2013, and welding work of the vacuum vessel sectors (seven 40° sectors and two 30° sectors) is currently ongoing on the cryostat base. Other components such as TF coils, PF coils, power supplies, cryogenic system, cryostat vessel, thermal shields and so on were or are being delivered to the Naka site for installation, assembly and commissioning. This paper gives technical progress on fabrication, installation and assembly of tokamak components and ancillary systems, as well as progress of the JT-60SA Research Plan being developed jointly by European and Japanese fusion communities.

  7. The pen behind the sword: power, literacy and the Roman army

    Directory of Open Access Journals (Sweden)

    John Wilkes

    2001-10-01

    Full Text Available The creation and cohesion of the Roman empire owed much to the spread of literacy through the provinces and the use of texts as an instrument of government. An important manifestation of this is the role of the written word in the Roman army, exemplified by the diplomas that granted Roman citizenship and other privileges to auxiliary soldiers on completion of their military service. Margaret Roxan, one of the Institute's honorary research fellows, has studied these diplomas for many years, and her achievement was honoured at an international conference in London in May 2002.

  8. Actualité du roman archéologique

    Directory of Open Access Journals (Sweden)

    Philippe Dufour

    2009-01-01

    Full Text Available Salammbô a beau se passer au IIIe siècle avant Jésus-Christ, Flaubert a beau y voir une ressource pour fuir le monde moderne, le roman antique n’en pense pas moins l’Histoire contemporaine, au moins par intermittence. On essaie de le montrer à propos d’un court fragment rescapé du chapitre explicatif, la description des assemblées des Syssites. Loin de démarquer simplement telle ou telle source (comme l’analyse aristotélicienne de la constitution carthaginoise dans La Politique, le paragraphe décrivant le banquet des Riches pendant que les Barbares entourent la ville évoque en surimpression la fête impériale sur fond de peur sociale. Des images relais (Les Romains de la décadence de Thomas Couture, Les Châtiments de Victor Hugo incitent le premier public à une lecture allégorique. Le chronotope de l’assemblée dénonce l’illusion d’un pouvoir et figure le devenir historique. Flaubert s’approprie ainsi de façon originale le genre du roman archéologique tel que l’abbé Barthélemy l’inventa ou tel que Henryk Sienkiewick le prolongera. S’y vérifie sa définition de l’histoire comme réflexion du présent sur le passé.Some scholars like Anne Green have shown that Flaubert in his historical novel, Salammbô, frequently alludes to contemporary history in spite of the obvious difference between the Carthaginian civilization and the modern world. In this essay I will try to grasp the shift in referenciality through a small description (a meeting between the wealthy, inspired by Aristotle’s Politics: Hugolian images of decadence from Les Châtiments appear superimposed on it, so that the archeological novel turns into an allegorical satire on the Second Empire.

  9. Graeco-Roman Astro-Architecture: The Temples of Pompeii

    Science.gov (United States)

    Tiede, Vance R.

    2014-01-01

    Roman architect Marcus Vetruvius Pollio (ca. 75-15 BC) wrote, “[O]ne who professes himself as an architect should be…acquainted with astronomy and the theory of the heavens…. From astronomy we find the east, west, south, and north, as well as the theory of the heavens, the Equinox, Solstice and courses of the Stars.” (De Architectura Libri Decem I:i:3,10). In order to investigate the role of astronomy in temple orientation, the author conducted a preliminary GIS DEM/Satellite Imaging survey of 11 temples at Pompeii, Italy (N 40d 45', E 14d 29'). The GIS survey measured the true azimuth and horizon altitude of each temple’s major axis and was field checked by a Ground Truth survey with theodolite and GPS, 5-18 April 2013. The resulting 3D vector data was analyzed with Program STONEHENGE (Hawkins 1983, 328) to identify the local skyline declinations aligned with the temple major axes. Analysis suggests that the major axes of the temples of Apollo, Jupiter and Venus are equally as likely to have been oriented to Pompeii’s urban grid, itself oriented NW-SE on Mt. Vesuvius’ slope and hydraulic gradient to optimize urban sewer/street drainage (cf. Hodge 1992). However, the remaining nine temples appear to be oriented to astronomical targets on the local horizon associated with Graeco-Roman calendrics and mythology. TEMPLE/ DATE/ MAJOR AXIS ASTRO-TARGET (Skyline Declination in degrees) Public Lares/AD 50/ Cross-Quarter 7 Nov/3 Feb Sun Set, Last Gleam (-16.5) Vespsian/ AD 69-79/ Cross-Quarter 7 Nov/3 Feb Sun Set, LG (-16.2) Fortuna Augusta/ AD 1/ Winter Solstice Sun Set, LG (-22.9) Aesculapius/ 100 BC/ Perseus Rise (β Persei-Algol = +33.0) & Midsummer Moon Major Stand Still Set, LG (-28.1) Isis/ 100 BC/ Midwinter Moon Major Stand Still Rise, Tangent (+28.5) & Equinox Sun Set, Tangent (-0.3) Jupiter/ 150 BC/ Θ Scorpionis-Sargas Rise (-38.0) Apollo/ 550 (rebuilt 70 BC)/ α Columbae-Phact Rise (-37.1) Venus/ 150 BC (rebuilt 70 BC)/ α Columbae-Phact Rise (-37

  10. Vene noorte jaoks valmib põhjalik Eestit tutvustav patriootlik portaal / Tiina Rekand ; kommenteerinud Roman Fokin, David Vseviov

    Index Scriptorium Estoniae

    Rekand, Tiina, 1985-

    2011-01-01

    Vene noortele luuakse veebileht www.patriot.ee, kus avaldatakse kirjalikke, foto- ja videomaterjale Eesti sümboolikast, venekeelseid artikleid Eesti ajaloolistest tegelastest, ajaloolisi tekste ning Eesti presidentide jt. riigitegelaste parimaid patriootlikke kõnesid

  11. WILLIAM GURNEE SINNIGEN - 20TH CENTURY CLASSICIST AND ROMAN HISTORIAN: BIOGRAPHY & BIBLIOGRAPHY

    Directory of Open Access Journals (Sweden)

    Matthew Gray Marsh

    2016-04-01

    Full Text Available William Gurnee Sinnigen was a Classicist and Roman historian, active in the mid-to-late 20th century. Trained at the University of Michigan by noted Roman administrative historian Arthur E. R. Boak, Sinnigen continued his mentor’s work in administrative history, producing several articles on different aspects of Roman and Byzantine administrative topics.  Sinnigen was also responsible for the revision and update of Boak’s acclaimed textbook on Roman history, as well as Charles Alexander Robinson’s textbook on Ancient history.  This article will provide a brief biography of Professor Sinnigen, along with a bibliography of his published works and reviews by other scholars of his work.

  12. Observance of the Law in Romans 14–15 and Dialogue with Trypho ...

    African Journals Online (AJOL)

    2012-02-10

    Feb 10, 2012 ... Nevertheless, in the localised context of the early Roman churches, it seems ..... Rules appeal to social values, such as justice or freedom. The problem .... specifically the wholesale rejection of Law-observant Christ- following ...

  13. Tänavuse Roman Tavasti nimelise stipendiumi... / Kadri Mälk

    Index Scriptorium Estoniae

    Mälk, Kadri, 1958-

    2008-01-01

    2007. aasta Roman Tavasti nimelise stipendiumi pälvis Eesti Kunstiakadeemia ehtekunsti eriala üliõpilane Linda al-Assi, kes on sündinud Alzheerias, kasvanud Pärnus. Linda al-Assi ehteseeriast teemal "Andestus"

  14. The ‘enemy within’ the post-Vatican II Roman Catholic Church

    Directory of Open Access Journals (Sweden)

    Graham A. Duncan

    2013-05-01

    Full Text Available The Second Vatican Council (1962–1965 is regarded as one of the most significant processes in the ecumenical church history of the 20th century. At that time, a younger generation of Roman Catholic theologians began to make their mark in the church and within the ecumenical theological scene. Their work provided an ecumenical bridge between the Reforming and the Roman Catholic ecclesiastical traditions, notwithstanding the subsequent negative response of the Roman church hierarchy. Despite important advances, recent pontificates significantly altered the theological landscape and undermined much of the enthusiasm and commitment to unity. Roman Catholic theological dissent provided common ground for theological reflection. Those regarded as the ‘enemy within’ have become respected colleagues in the search for truth in global ecclesiastical perspective. This article will use the distinction between the history and the narratives of Vatican II.

  15. Eesti Maanteemuuseumis lavastub Roman Baskini käe all "Augustikuu teemaja"

    Index Scriptorium Estoniae

    Veski, Rivo

    2009-01-01

    Roman Baskini lavastatud komöödia "Augustikuu teemaja" Maanteemuuseumis. Autor John Patrick, mängivad mitmed harrastusteatrite näitlejad, teiste hulgas MTÜ Vilde Teatri liikmed. Peaosas Marko Matvere

  16. Improvement of the real-time processor in JT-60 data processing system

    International Nuclear Information System (INIS)

    Sakata, S.; Kiyono, K.; Sato, M.; Kominato, T.; Sueoka, M.; Hosoyama, H.; Kawamata, Y.

    2009-01-01

    Real-time processor, RTP is a basic subsystem in the JT-60 data processing system and plays an important role in JT-60 feedback control for plasma experiment. During the experiment, RTP acquires various diagnostic signals, processes them into a form of physical values, and transfers them as sensor signals to the particle supply and heating control supervisor for feedback control via reflective memory synchronization with 1 ms clock signals. After the start of RTP operation in 1997, to meet the demand for advanced plasma experiment, RTP had been improved continuously such as by addition of diagnostic signals with faster digitizers, reducing time for data transfer utilizing reflective memory instead of CAMAC. However, it is becoming increasingly difficult to maintain, manage, and improve the outdated RTP with limited system CPU capability. Currently, a prototype RTP system is being developed for the next real-time processing system, which is composed of clustered system utilizing VxWorks computer. The processes on the existing RTP system will be decentralized to the VxWorks computer to solve the issues of the existing RTP system. The prototype RTP system will start to operate in August 2008.

  17. Evaluation of mechanical strength of the joints in JT-60 toroidal field coil conductors

    International Nuclear Information System (INIS)

    Nishio, Satoshi; Ohkubo, Monoru; Sasajima, Hiroshi

    1980-04-01

    Toroidal field (TF) coils of JT-60 produce a toroidal field of 45 kG at a plasma axis, they have an inner bore of 3.90 m and a weight of about 80 metric tons per coil. Eighteen TF coils are located around a torus axis at regular intervals. TF coil conductors are mostly jointed by high frequency induction brazing, the rest jointed by welding. In deciding the details of the jointing procedures, the conductor size and the requested mechanical strength are mainly taken into consideration. Described are non-destructive inspection methods for the brazed joints, strength evaluation, and the inspection criteria. Ultrasonic testing method is found to be the most effective in evaluation of mechanical properties of the brazed joints especially in terms of fatigue strength. In section 1, specifications of the TF coils are given. In section 2, the ultrasonic inspection method and the detectability of this apparatus are described in detail, the defects of known size are compared with the indication values and display figures. The apparatus developed for JT-60 is operated automatically also recording the inspectionresults. In section 3, mechanical strength of the brazed joints with initial defects is discussed on the basis of Fracture Mechanics theory and results of the fatigue crack growth test. The inspection criteria in accordance with the descriptions of section 2 and 3 are given in section 4. (author)

  18. Computer system for the beam line data processing at JT-60 prototype neutral beam injector

    International Nuclear Information System (INIS)

    Horiike, Hiroshi; Kawai, Mikito; Ohara, Yoshihiro

    1987-08-01

    The present report describes the hard and soft wares of the data acquisition computer system for the prototype neutral injector unit for JT-60. In order to operate the unit, more than hundreds of signals of the beam line components have to be measured. These are mainly differential thermometers for the coolant waters and thermocouples for the beam dump components but not include those for the cryo system. Since the unit operates in a series of pulses, the measurement should be conducted very quickly in order to ensure the simultaneity of large number of the measured data. The present system actualize fast data acquisition using a small computer of 128 kB and measuring instruments connected through the bus. The system is connected to the JAERI computer center since the data capacity is fairly large to completely process them by the small computer. Therefore the measured data can be transferred to the computer center to calculate there, and the results can be received. After the system was completed the computer quickly print out the power flow data, which needed much work to calculate with hands. This system was very useful. It enhanced the experiments at the unit and reduced the labor. It enables us to early demonstrate the rated operation of the unit and to accurately estimate such operation data of the JT-60 NBI as the injection power. (author)

  19. Operation experiences of the JT-60 first walls during high-power additional heating experiments

    International Nuclear Information System (INIS)

    Takatsu, H.; Ando, T.; Yamamoto, M.; Arai, T.; Kodama, K.; Suzuki, M.; Shimizu, M.

    1989-01-01

    JT-60 started its operation in May 1985 with TiC-coated molybdenum or Inconel 625 first walls. They provided very clean surfaces as well as superior plasma characteristics during Joule heating discharges. Though 20 μm-thick TiC coatings showed good adhesion characteristics, melting of the TiC coating and also the molybdenum or Inconel 625 substrate was observed at some specific spots, and an influx of heavy metals to the main plasma was inevitable during discharges. Initial results of the additional heating experiments showed degrading effects of locally melted TiC-coated molybdenum or Inconel 625 on plasma operation. Therefore, about a half of the TiC-coated first walls were removed and new graphite first walls were installed during the venting period from April to May 1987. The start-up of the discharge conditioning after installation of a significant number of graphite tiles was very rapid. Flexibility in plasma operation was increased, and JT-60 extended the operation region beyond its original specifications. The graphite first walls of the main chamber performed admirably and maintained their integrity under the conditions of plasma current and additional heating power up to 3.2 MA and 30 MW, respectively. On the other hand, the number of damaged divertor plates was much larger than that expected. The reason of unexpected failure is now under examination. (orig.)

  20. Structural design of vacuum bulkheads in piping penetration for the cryostat base of JT-60SA

    International Nuclear Information System (INIS)

    Nakamura, Shigetoshi; Shibama, Yusuke K.; Masaki, Kei

    2016-11-01

    This study examined the structure of the boundary box that is capable of installing the cryostat base of JT-60SA in a narrow space. Since other devices stand close in the neighborhood, it was designed to fit within a limited space to avoid interference. Spatial limitation and generated stress caused by each load were used as design conditions. From the calculation results of the generated stress with respect to each load, the maximum stress is generated by the displacement of the pipeline associated with the displacement of the vacuum container at the time of earthquake and 200degC baking, so bellows were designed to absorb the displacement of the piping. It was confirmed through 3-D finite element analysis that this generated stress is less than the allowable stress and there is no problem in structural integrity. This paper explained the composition of major equipment of JT-60SA and the structure of cryostat base. In the structural analysis of the boundary box, consideration was given to the pressure difference during vacuum closure or abnormal events, temperature distribution, pipe displacement associated with the deformation of vacuum vessel, and seismic load. As a result of finite element analysis, it was confirmed that the displacement amount and temperature distribution during plasma operation and baking were within the allowable range. In addition, the maximum stress during cryostat helium leak was also within the allowable range. (A.O.)

  1. Design and performance tests of gas circulation heating of JT-60U vacuum vessel

    International Nuclear Information System (INIS)

    Yotsuga, M.; Masuzaki, T.; Sago, H.; Nishikane, M.; Uchikawa, T.; Iritani, Y.; Murakami, T.; Horiike, H.; Neyatani, Y.; Ninomiya, H.; Matsukawa, M.; Ando, T.; Miyachi, I.

    1992-01-01

    This paper reports that in the final stage of construction of the upgraded JT-60 device (JT-60U), baking tests of the vacuum vessel was performed. The vessel torus was heated-up to 300 degrees C by means of the nitrogen gas circulation system and electric heaters mounted on the outboard solid wall of the vessel. The design of the gas flow channels inside the double-wall structure of the vessel was done based on flow model tests, fluid analysis, and flow network analysis. The results of the baking tests were satisfactory. In maintaining 300 degrees C bake-out temperature, required heating power of the gas circulation system and outboard heaters was 520kW and 50kW, respectively. The temperature distribution over the vessel wall was within 300 ± 30 degrees C. It was also shown or suggested that heat-up and cool-down time is about 30 hours. The baking tests data have been reflected on operations for plasma experiments

  2. Characteristics of divertor plasma and scrape-off layer in JT-60U

    International Nuclear Information System (INIS)

    Itami, K.; Shimada, M.; Hosogane, N.

    1992-01-01

    Heat flux to the divertor is measured by thermography and the heat transport in the scrape-off layer is studied in beam heated discharges of JT-60U. The heat flux onto the divertor is ∝50% of total beam power at maximum. The in-out asymmetry of the heat flux P HEAT in /P HEAT out is as large as 20-40% when the ion grad-B drift is toward the divertor. Differences in P HEAT in /P HEA T out due to the direction of ion grad-B drift are as large as large as ∝40%. A scaling of the peaking factor Y of heat flux, defined by Y=2πRfq max /P HEAT , is obtained for beam heated discharges in JT-60U with a wide range of plasma parameters. The Y corresponds to the inverse of the thickness of the scrape-off layer. From a statistical analysis, it is found that the peaking factor Y of heat flux scales as P HEAT 0.49±0.18 anti n e -0.45±0.22 q eff -0.67±0.18 . (orig.)

  3. Development of TiC coated wall materials for JT-60

    International Nuclear Information System (INIS)

    Abe, T.; Murakami, Y.; Obara, K.; Hiroki, S.; Nakamura, K.; Inagawa, K.

    1985-01-01

    Development of titanium carbide (TiC, 20 μm thick) coated wall materials has been carried out for JT-60. Application of TiC coatings onto molybdenum and Inconel 625 substrates requires a deposition temperature below 950 0 C and 600 0 C respectively, because recrystallization of molybdenum and age hardening of Inconel 625 occur above these temperatures. Through this process of coating we develop a new type plasma CVD(TP-CVD method) for molybdenum and a new type PVD(HCD-ARE method) for Inconel 625 which could successfully reduce the deposition temperature to 900 0 C and 500 0 C, respectively. The TiC coated wall samples were characterized by AES, ESCA, X-ray diffractometer, EPMA, SEM, metalography, tensile tests, thermal shock tests, and other techniques. As a result of the above measurements, it was demonstrated that the characteristics of those TiC coated walls satisfy the requirements arising from JT-60 operation conditions. (orig.)

  4. Avoidance of VDEs during plasma current quench in JT-60U

    International Nuclear Information System (INIS)

    Yoshino, R.; Nakamura, Y.; Neyatani, Y.

    1996-01-01

    Vertical displacement events (VDEs) during plasma current quench (I p quench) are one of the serious problems encountered in designing tokamak fusion reactors, owing to the generation of enormously high electromagnetic forces on the vacuum vessel and in-vessel components, but they have been passively and actively avoided in JT-60U. In JT-60U 'slow I p quench' is ended with very fast plasma current termination (final I p termination), and the halo current is frequently measured at this final I p termination. VDEs make the final I p termination severe by increasing the halo current and the electromagnetic force. A strong dependence of VDE growth rate on the initial vertical position of the plasma current centre (Z J ) has been clarified experimentally, and a neutral point of Z J for VDE has been found at ∼ 15 cm above the midplane of the vacuum vessel. According to these measurements, VDE has been avoided by the selection of Z J at the start of I p quench (passive control) and by the control of Z J during I p quench (active control) eventually obtained owing to the small deviation of Z J in real time calculations from its actual value. Furthermore, passive avoidance of VDEs by the injection of a neon ice pellet has been demonstrated. (author). 29 refs, 14 figs

  5. Effect of halo current and its toroidal asymmetry during disruptions in JT-60U

    International Nuclear Information System (INIS)

    Neyatani, Y.; Yoshino, R.; Ando, T.

    1995-01-01

    A poloidal halo current due to a vertical displacement event (VDE) is observed in experimentally simulated VDE discharges and density limit disruptions in the JT-60U tokamak. In the case of a clockwise I p and B T discharge, the halo current flows into the vacuum vessel from the inside separatrix and goes back to the plasma from the outside separatrix. A maximum halo current is produced by a change in the poloidal flux generated by plasma current decay. A toroidal asymmetry factor of 2.5 is estimated from the requirements of the fracture of the carbon-fiber composite tiles. The toroidal asymmetry is caused by the poloidal field (PF) that is produced by the toroidal field (TF) ripple, the deformation of the vacuum vessel, the setting error between the vacuum vessel and the TF and PF coils, the low-n mode during current quench, etc. To consider this asymmetry, in JT-60U, one must estimate the total halo current as nearly 26% of the plasma current just before a current quench. 25 refs., 10 figs

  6. Physics of strong internal transport barriers in JT-60U reversed-magnetic-shear plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, N; Takizuka, T; Sakamoto, Y; Fujita, T; Kamada, Y; Ide, S; Koide, Y [Japan Atomic Energy Agency, 801-1 Mukouyama, Naka, Ibaraki 311-0193 (Japan)

    2006-05-15

    The physics of strong internal transport barriers (ITBs) in JT-60U reversed-magnetic-shear (RS) plasmas has been studied through the modelling on the 1.5 dimensional transport simulation. The key physics to produce two scalings on the basis of the JT-60U box-type ITB database are identified. As for the scaling for the narrow ITB width proportional to the ion poloidal gyroradius, the following three physics are important: (1) the sharp reduction of the anomalous transport below the neoclassical level in the RS region, (2) the autonomous formation of pressure and current profiles through the neoclassical transport and the bootstrap current and (3) the large difference between the neoclassical transport and the anomalous transport in the normal-shear region. As for the scaling for the energy confinement inside ITB ({epsilon}{sub f}{beta}{sub p,core} {approx} 0.25, where {epsilon}{sub f} is the inverse aspect ratio at the ITB foot and {beta}{sub p,core} is the core poloidal beta value), the value of 0.25 is found to be a saturation value due to the MHD equilibrium. The value of {epsilon}{sub f}{beta}{sub p,core} reaches the saturation value, when the box-type ITB is formed in the strong RS plasma with a large asymmetry of the poloidal magnetic field, regardless of the details of the transport and the non-inductively driven current.

  7. High Mach flow associated with plasma detachment in JT-60U

    International Nuclear Information System (INIS)

    Hatayama, A.; Hoshino, K.; Miyamoto, K.

    2003-01-01

    Recent new results of the high Mach flows associated with plasma detachment are presented on the basis of numerical simulations by a 2-D edge simulation code (the B2-Eirene code) and their comparisons with experiments in JT-60U W-shaped divertor plasma. High Mach flows appear near the ionization front away from the target plate. The plasma static pressure rapidly drops, while the total pressure is kept almost constant near the ionization front, because the ionization front near the X-point is clearly separated from the momentum loss region near the target plate. Redistribution from static to dynamic pressure without a large momentum loss is confirmed to be a possible mechanism of the high Mach flows. It has been also shown that the radial structure of the high Mach flow near the X point away from the target plate has a strong correlation with the DOD (Degree of Detachment) at the target plate. Also, we have made systematic analyses on the high Mach flows for both the 'Open' geometry and the 'W-shaped' geometry of JT-60U in order to clarify the geometric effects on the flows. (author)

  8. Development of computer-aided software engineering tool for sequential control of JT-60U

    International Nuclear Information System (INIS)

    Shimono, M.; Akasaka, H.; Kurihara, K.; Kimura, T.

    1995-01-01

    Discharge sequential control (DSC) is an essential control function for the intermittent and pulse discharge operation of a tokamak device, so that many subsystems may work with each other in correct order and/or synchronously. In the development of the DSC program, block diagrams of logical operation for sequential control are illustrated in its design at first. Then, the logical operators and I/O's which are involved in the block diagrams are compiled and converted to a certain particular form. Since the block diagrams of the sequential control amounts to about 50 sheets in the case of the JT-60 upgrade tokamak (JT-60U) high power discharge and the above steps of the development have been performed manually so far, a great effort has been required for the program development. In order to remove inefficiency in such development processes, a computer-aided software engineering (CASE) tool has been developed on a UNIX workstation. This paper reports how the authors design it for the development of the sequential control programs. The tool is composed of the following three tools: (1) Automatic drawing tool, (2) Editing tool, and (3) Trace tool. This CASE tool, an object-oriented programming tool having graphical formalism, can powerfully accelerate the cycle for the development of the sequential control function commonly associated with pulse discharge in a tokamak fusion device

  9. Development of a pellet cutting and loading device for the JT-60 repetitive pellet injector

    International Nuclear Information System (INIS)

    Hiratsuka, Hajime; Ichige, Hisashi; Kizu, Kaname; Iwahashi, Takaaki; Honda, Masao

    2001-03-01

    In JT-60, a pellet injector that repetitively injects deuterium pellets is under development to supply fuel to high temperature plasmas and sustain high-density plasmas. The pellet injector generates cubic pellets and accelerates them with a straight-arm rotor by centrifugal force. In this acceleration method, it is important to supply pellets reliably and stably, to prevent pellet orbits from disordering and to stabilize the launching direction. To achieve higher performance of the injector, a pellet cutting and loading device that cuts a deuterium ice rod into cubic pellets and loads them to the pellet injector successively and stably has been developed. The pellet cutting and loading device can cut a deuterium ice rod produced at low temperature of -8 Pam 3 /s, cutting time of <3 ms, cutting frequency of 1-20 Hz and cutter stroke of 2.5 mm were confirmed in the device test. In the operation test after assembling this device to the centrifugal pellet injector, the operational performance of pellet injection frequency of ∼10 Hz, pellet speed of ∼690 m/s and pellet injection duration time of ∼3.5 s was achieved. Thus, the development of the pellet cutting and loading device contributed to the upgrade of the JT-60 pellet injector. (author)

  10. ERATO-code analysis of vacuum magnetic field oscillations in JT-60 divertor configuration

    International Nuclear Information System (INIS)

    Ozeki, Takahisa; Tokuda, Shinji; Tsunematsu, Toshihide; Ishida, Shinichi; Neyatani, Yuzuru; Itami, Kiyoshi; Azumi, Masafumi

    1989-07-01

    Magnetic field oscillations caused by external kink instabilities are numerically studied by using the ideal MHD stability code ERATO-J. Dependence of a spatial distribution of their amplitude and phase on aspect-ratio, beta-poloidal, shaping of conducting shell and divertor/limiter configurations is examined in detail. In the low aspect ratio plasma, the amplitude of magnetic oscillations in the inner side of the torus is larger than that in the outer. On the contrary, as the poloidal beta increases, the amplitude in the outer side of the torus becomes larger than that in the inner. In the divertor configuration, the amplitude of oscillations reduces near the X-point and the phase is locally modulated. The coherent magnetic oscillations observed in JT-60 agree well with the theoretical results, where the vacuum vessel is assumed to be an ideal conducting shell. The non-uniformity of the poloidal distribution observed in JT-60 can be explained by the combined effects of the finite beta, the X-point and the shape of shell. (author)

  11. Numerical simulation on current spike behaviour of JT-60U disruptive plasmas

    International Nuclear Information System (INIS)

    Takei, N; Nakamura, Y; Tsutsui, H; Yoshino, R; Kawano, Y; Ozeki, T; Tobita, K; Tsuji-Iio, S; Shimada, R; Jardin, S C

    2004-01-01

    Characteristics and underlying mechanisms for plasma current spikes, which have been frequently observed during the thermal quench of JT-60U disruptions, were investigated through tokamak simulation code simulations including the passive shell effects of the vacuum vessel. Positive shear and reversed shear (PS and RS) plasmas were shown to have various current spike features in the experiments, e.g. an impulsive increase in the plasma current (positive spike) in the majority of thermal quenches, and a sudden decrease (negative spike), that has been excluded from past consideration, as an exception. It was first clarified that the shell effects, which become significant especially at a strong pressure drop due to the thermal quench of high β p plasmas, play an important role in the current spike in accordance with the initial relation of the radial location between the plasma equilibria and the vacuum vessel. As a consequence, a negative current spike may appear at thermal quench when the plasma is positioned further out from the geometric centre of the vacuum vessel. It was also pointed out that a further lowering in the internal inductance, in contradiction to previous interpretation in the past, is a plausible candidate for the mechanism for positive current spikes observed even in RS plasmas. The new interpretation enables us to reason out the whole character of current spikes of JT-60U disruptions

  12. Mutacin H-29B is identical to mutacin II (J-T8

    Directory of Open Access Journals (Sweden)

    Lavoie Marc C

    2006-04-01

    Full Text Available Abstract Background Streptococcus mutans produces bacteriocins named mutacins. Studies of mutacins have always been hampered by the difficulties in obtaining active liquid preparations of these substances. Some of them were found to be lantibiotics, defined as bacterial ribosomally synthesised lanthionine-containing peptides with antimicrobial activity. The goal of this study was to produce and characterize a new mutacin from S. mutans strain 29B, as it shows a promising activity spectrum against current human pathogens. Results Mutacin H-29B, produced by S. mutans strain 29B, was purified by successive hydrophobic chromatography from a liquid preparation consisting of cheese whey permeate (6% w/v supplemented with yeast extract (2% and CaCO3 (1%. Edman degradation revealed 24 amino acids identical to those of mutacin II (also known as J-T8. The molecular mass of the purified peptide was evaluated at 3246.08 ± 0.1 Da by MALDI-TOF MS. Conclusion A simple procedure for production and purification of mutacins along with its characterization is presented. Our results show that the amino acid sequence of mutacin H-29B is identical to the already known mutacin II (J-T8 over the first 24 residues. S. mutans strains of widely different origins may thus produce very similar bacteriocins.

  13. Overview of JT-60U results toward high integrated performance in reactor-relevant regime

    International Nuclear Information System (INIS)

    Fujita, T.

    2002-01-01

    Toward steady sustainment of high integrated performance, we have developed weak magnetic shear (high β p mode) and reversed magnetic shear plasmas. As a large-sized tokamak equipped with a variety of devices for heating, current drive and profile/shape control, JT-60U has high ability to approach the conditions required in reactors: low values of normalized Larmor radius and collisionality, high temperatures with T e > or approx. T i , etc. This paper reviews recent JT-60U results with the emphasis on the projection to the reactor-relevant regime. Full non-inductive current drive has been achieved in a 1.8 MA high β p H-mode plasma with β N 2:4, HH y2 =1.2 and high fusion triple product (3 x 10 20 m -3 keVs) owing to increased N-NB power. In a reversed shear plasma, HH y2 =1.4 at n e /n GW 0.8 under the full non-inductive current drive has been achieved with injection of LHRF and N-NB. In box-type ITBs with reversed shear, barriers for ions and electrons were sustained in a regime with T e > or approx. T i . The pedestal pressure was doubled with increased total poloidal beta in pellet-injected high triangularity plasmas with type I and II ELMs. Stable existence of current hole was demonstrated. (author)

  14. Resistive instabilities in reversed shear discharges and wall stabilization on JT-60U

    International Nuclear Information System (INIS)

    Takeji, S.; Tokuda, S.; Fujita, T.; Suzuki, T.; Isayama, A.; Ide, S.; Ishii, Y.; Kamada, Y.; Koide, Y.; Matsumoto, T.; Oikawa, T.; Ozeki, T.; Sakamoto, Y.

    2001-01-01

    Resistive instabilities and wall stabilization of ideal low toroidal mode number, n, kink modes are investigated in JT-60U reversed shear discharges. Resistive interchange modes with n=1 are found to appear in reversed shear discharges with large pressure gradient at the normalized beta, β N , of about unity or even lower. The resistive interchange modes appear as intermittent burst-like magnetohydrodynamic (MHD) activities and higher n≤3 modes are observed occasionally in higher β N regime. No clear degradation of the plasma stored energy is observed by the resistive interchange modes themselves. It is also found that resistive interchange modes can lead to major collapse owing to a coupling with tearing modes at the outer mode rational surface over the minimum safety factor. Stability analysis revealed that stability parameter of tearing modes, Δ' , at the outer mode rational surface is affected by the free-boundary condition. The result is consistent with the experimental evidence that major collapse tends to occur when plasma edge safety factor, q*, is near integer values. Stabilization of ideal low n kink modes by the JT-60U wall is demonstrated. Magnetohydrodynamic perturbations that are attributed to resistive wall modes are observed followed by major collapse in wall-stabilized discharges. (author)

  15. Development of fast charge exchange recombination spectroscopy by using interference filter method in JT-60U

    International Nuclear Information System (INIS)

    Kobayashi, Shinji; Sakasai, Akira; Koide, Yoshihiko; Sakamoto, Yoshiteru; Kamada, Yutaka; Hatae, Takaki; Oyama, Naoyuki; Miura, Yukitoshi

    2003-01-01

    Recent developments and results of fast charge exchange recombination spectroscopy (CXRS) using interference filter method are reported. In order to measure the rapid change of the ion temperature and rotation velocity under collapse or transition phenomena with high-time resolution, two types of interference filter systems were applied to the CXRS diagnostics on the JT-60U Tokamak. One can determine the Doppler broadening and Doppler shift of the CXR emission using three interference filters having slightly different center wavelengths. A rapid estimation method of the temperature ad rotation velocity without non-linear least square fitting is presented. The modification of the three-filters system enables us to improve the minimum time resolution up to 0.8 ms, which is better than that of 16.7 ms for the conventional CXRS system using the CCD detector in JT-60U. The other system having seven wavelength channels is newly fabricated to crosscheck the results obtained by the three-filters assembly, that is, to verify that the CXR emission forms a Gaussian profile under collapse phenomena. In a H-mode discharge having giant edge localized modes, the results obtained by the two systems are compared. The applicability of the three-filters system to the measurement of rapid changes in temperature and rotation velocity is demonstrated. (author)

  16. Mechanical strength evaluation of the welded bellows for the ports of the JT-60 vacuum vessel

    International Nuclear Information System (INIS)

    Takatso, H.; Shimizu, M.; Yamamoto, M.

    1983-01-01

    Mechanical strength of the welded bellows for the ports of the JT-60 vacuum vessel was evaluated, laying the emphasis on the fatigue strength under the torsional electromagnetic force. The welded bellows were designed to be loaded with the forced deflection due to the relative displacement between the vacuum vessel and the external fixed point, the atmospheric pressure and the forced torsional angle due to the electromagnetic force. Stresses caused by the former two were estimated following the formulae proposed by the Kellogg Company. On the other hand, two formulae were established to estimate the stress caused by the last, after examining experimentally the behavior of the welded bellows under the torsional load; one is the shearing stress evaluation formula and the other is the axial bending stress evaluation formula. It was found that the welded bellows can easily buckle under the torsional load and the former formula corresponds to the case of non-buckling and the latter to the case of buckling. The present mechanical strength evaluation method was applied to the three kinds of the welded bellows to be used in the ports of the JT-60 vacuum vessel (neutral beam injection ports, vacuum pumping ports and the adjustable limiter ports) and it was confirmed that they have sufficient strength in the range of the design load conditions

  17. Dynamic simulations for preparing the acceptance test of JT-60SA cryogenic system

    Science.gov (United States)

    Cirillo, R.; Hoa, C.; Michel, F.; Poncet, J. M.; Rousset, B.

    2016-12-01

    Power generation in the future could be provided by thermo-nuclear fusion reactors like tokamaks. There inside, the fusion reaction takes place thanks to the generation of plasmas at hundreds of millions of degrees that must be confined magnetically with superconductive coils, cooled down to around 4.5 K. Within this frame, an experimental tokamak device, JT-60SA is currently under construction in Naka (Japan). The plasma works cyclically and the coil system is subject to pulsed heat loads. In order to size the refrigerator close to the average power and hence optimizing investment and operational costs, measures have to be taken to smooth the heat load. Here we present a dynamic model of the JT-60SA's Auxiliary Cold box (ACB) for preparing the acceptance tests of the refrigeration system planned in 2016 in Naka. The aim of this study is to simulate the pulsed load scenarios using different process controls. All the simulations have been performed with EcosimPro® and the associated cryogenic library: CRYOLIB.

  18. Development of a VME multi-processor system for plasma control at the JT-60 Upgrade

    International Nuclear Information System (INIS)

    Takahashi, M.; Kurihara, K.; Kawamata, Y.; Akasaka, H.; Kimura, T.

    1992-01-01

    Design and initial operation results are reported of a VME multi-processor system [1] for plasma control at a large fusion device named 'the JT-60 Upgrade' utilizing three 32-bit MC88100 based RISC computers and VME components. Development of the system was stimulated by faster and more accurate computation requirements for the plasma position and current control. The RISC computers operate at 25 MHz along with two cashe memories named MC88200. We newly developed VME bus modules of up/down counter, analog-to-digital converter and clock pulse generator for measuring magnetic field and coil current and for synchronizing the processing in the three RISCs and direct digital controllers (DDCs) of magnet power supplies. We also evaluated that the speed of the data transfer between the VME bus system and the DDCs through CAMAC highways satisfies the above requirements. In the initial operation of the JT-60 upgrade, it has been proved that the VME multi-processor system well controls the plasma position and current with a sampling period of 250 μsec and a delay of 500 μsec. (author)

  19. Roman bronze artefacts from Thamusida (Morocco): Chemical and phase analyses

    Energy Technology Data Exchange (ETDEWEB)

    Gliozzo, E., E-mail: gliozzo@unisi.i [Dipartimento di Scienze della Terra, Universita di Siena, via Laterina 8, 53100 Siena (Italy); Kockelmann, W., E-mail: winfried.kockelmann@stfc.ac.u [Science and Technology Facilities Council, Rutherford Appleton Laboratory, Harwell Science and Innovation Campus, Didcot OX11 0QX (United Kingdom); Bartoli, L., E-mail: bartoli@ifac.cnr.i [Istituto dei Sistemi Complessi, Consiglio nazionale delle Ricerche, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy); Tykot, R.H., E-mail: rtykot@usf.ed [Department of Anthropology, University of South Florida, Tampa, FL 33620 (United States)

    2011-02-01

    Twenty-six objects (1st to the 3rd century AD) found at the archaeological site of Thamusida (Morocco), which is a military settlement between the 1st and the 3rd century AD, have been investigated by means of portable X-ray fluorescence and time of flight-neutron diffraction. The combination of element-sensitive X-ray fluorescence and structure-sensitive neutron diffraction yields, in a totally non-destructive way, the necessary information to discriminate the copper alloy from corrosion and alteration layers. Results allowed dividing the repertory into five groups: (a) unalloyed copper, (b) binary alloys made of Cu and Sn, frequently leaded; (c) unleaded binary alloys made of Cu and Zn; (d) ternary alloys made of Cu, Sn and Zn, both leaded and unleaded; (e) quaternary alloys made of Cu, Sn, Zn and As. The choice of alloy is heterogeneous, mainly depending on availability and costs of raw and/or scrap materials and on technological constraints. Interestingly, the reconstruction obtained for Thamusida could either anticipate the important change in the Roman use of copper alloys generally referred as 'zinc decline', or more likely, indicate that brass never conspicuously entered the local metal-working activities of this military site.

  20. a Procedural Solution to Model Roman Masonry Structures

    Science.gov (United States)

    Cappellini, V.; Saleri, R.; Stefani, C.; Nony, N.; De Luca, L.

    2013-07-01

    The paper will describe a new approach based on the development of a procedural modelling methodology for archaeological data representation. This is a custom-designed solution based on the recognition of the rules belonging to the construction methods used in roman times. We have conceived a tool for 3D reconstruction of masonry structures starting from photogrammetric surveying. Our protocol considers different steps. Firstly we have focused on the classification of opus based on the basic interconnections that can lead to a descriptive system used for their unequivocal identification and design. Secondly, we have chosen an automatic, accurate, flexible and open-source photogrammetric pipeline named Pastis Apero Micmac - PAM, developed by IGN (Paris). We have employed it to generate ortho-images from non-oriented images, using a user-friendly interface implemented by CNRS Marseille (France). Thirdly, the masonry elements are created in parametric and interactive way, and finally they are adapted to the photogrammetric data. The presented application, currently under construction, is developed with an open source programming language called Processing, useful for visual, animated or static, 2D or 3D, interactive creations. Using this computer language, a Java environment has been developed. Therefore, even if the procedural modelling reveals an accuracy level inferior to the one obtained by manual modelling (brick by brick), this method can be useful when taking into account the static evaluation on buildings (requiring quantitative aspects) and metric measures for restoration purposes.

  1. The Roman Catholic parish in Poland as the local community

    Directory of Open Access Journals (Sweden)

    Mariański Janusz

    2014-01-01

    Full Text Available In the Roman Catholic Church a parish is the smallest legal unit and it is the milieu for religious, social, and cultural activities for a group of people joined together in a geographical area. The purpose of this article is a sociological study examining the Catholic parish in Poland as a local community. Today a parish along with its community is exposed to social change and to myriad forces characteristic of the postmodern culture. In Poland two opposite forces characterize the life of a parish community: on the one side, secularization and individualization, and on the other side, socialization and evangelization. The subjective dimension of a local community, which is related to identification of people with a local parish, along with social bonds with the parish as a local community, are discussed in the first two sections of the article. In subsequent sections some issues related to common activities, membership in movements, religious communities, and Catholic associations within the parish will be presented. While the agency of people in the parish community is theoretically acknowledged, it is still not fully implemented. The discussion is based on the data obtained from major public opinion institutes in Poland.

  2. [The Vatican and the Roman physicians: debates on corpuscular theories].

    Science.gov (United States)

    Donato, Maria Pia

    2003-01-01

    The essay aims at addressing the debates on corpuscular theories in Rome within the context of the political and religious tensions of the late 17th century. Documents in the archives of the "Congregazione per la Dottrina della Fede" allow us to outline the changing attitudes of the Church of Rome towards atomistic philosophy and to highlight the factional clashes within Roman institutions on the issue. These dynamics gave way to the Congresso Medico Romano of G. Brasavola and G.M. Lancisi, an academy which soon became the promoting agent of an eclectic corpuscular medicine. The Holy Office put the success of the "moderns" into question in 1690, after Alexander VIII had come to the throne. The attach was part of a general repression of atomism (also in Naples and Florence) but also of quietism and freethinking. Despite the crisis, the "moderns" were able to bind their corpuscularism to a strictly defined epistemological model. In the frame of the contemporary biomedical sciences, questions on the ultimate nature of atoms could be abandoned without dismissing the corpuscular theory and practice of medicine.

  3. A PROCEDURAL SOLUTION TO MODEL ROMAN MASONRY STRUCTURES

    Directory of Open Access Journals (Sweden)

    V. Cappellini

    2013-07-01

    Full Text Available The paper will describe a new approach based on the development of a procedural modelling methodology for archaeological data representation. This is a custom-designed solution based on the recognition of the rules belonging to the construction methods used in roman times. We have conceived a tool for 3D reconstruction of masonry structures starting from photogrammetric surveying. Our protocol considers different steps. Firstly we have focused on the classification of opus based on the basic interconnections that can lead to a descriptive system used for their unequivocal identification and design. Secondly, we have chosen an automatic, accurate, flexible and open-source photogrammetric pipeline named Pastis Apero Micmac – PAM, developed by IGN (Paris. We have employed it to generate ortho-images from non-oriented images, using a user-friendly interface implemented by CNRS Marseille (France. Thirdly, the masonry elements are created in parametric and interactive way, and finally they are adapted to the photogrammetric data. The presented application, currently under construction, is developed with an open source programming language called Processing, useful for visual, animated or static, 2D or 3D, interactive creations. Using this computer language, a Java environment has been developed. Therefore, even if the procedural modelling reveals an accuracy level inferior to the one obtained by manual modelling (brick by brick, this method can be useful when taking into account the static evaluation on buildings (requiring quantitative aspects and metric measures for restoration purposes.

  4. Suicidal behaviour in the ancient Greek and Roman world.

    Science.gov (United States)

    Lykouras, L; Poulakou-Rebelakou, E; Tsiamis, C; Ploumpidis, D

    2013-12-01

    We attempt to present and analyze suicidal behaviour in the ancient Greek and Roman world. Drawing information from ancient Greek and Latin sources (History, Philosophy, Medicine, Literature, Visual Arts) we aim to point out psychological and social aspects of suicidal behaviour in antiquity. The shocking exposition of suicides reveals the zeitgeist of each era and illustrates the prevailing concepts. Social and legal reactions appear ambivalent, as they can oscillate from acceptance and interpretation of the act to punishment. In the history of these attitudes, we can observe continuities and breaches, reserving a special place in cases of mental disease. The delayed emergence of a generally accepted term for the voluntary exit from life (the term suicidium established during the 17th century), is connected to reactions triggered by the act of suicide than to the frequency and the extent of the phenomenon. The social environment of the person, who voluntary ends his life usually dictates the behaviour and historical evidence confirms the phenomenon. Copyright © 2013 Elsevier B.V. All rights reserved.

  5. Urbanism and the division of labour in the Roman Empire.

    Science.gov (United States)

    Hanson, J W; Ortman, S G; Lobo, J

    2017-11-01

    One of the hallmarks of human agglomeration is an increase in the division of labour, but the exact nature of this relationship has been debated among anthropologists, sociologists, economists, and historians and archaeologists. Over the last decade, researchers investigating contemporary urban systems have suggested a novel explanation for the links between the numbers of inhabitants in settlements and many of their most important characteristics, which is grounded in a view of settlements as social networks embedded in built environments. One of the remarkable aspects of this approach is that it is not based on the specific conditions of the modern world (such as capitalism or industrialization), which raises the issue of whether the relationships observed in contemporary urban systems can also be detected in pre-modern urban or even non-urban systems. Here, we present a general model for the relationship between the population and functional diversity of settlements, where the latter is viewed as an indicator of the division of labour. We then explore the applicability of this model to pre-modern contexts, focusing on cities in the Roman Empire, using estimates of their numbers of inhabitants, numbers of documented professional associations, and numbers of recorded inscriptions to develop an index of functional diversity. Our results are consistent with theoretical expectations, adding further support to the view that urban systems in both contemporary and pre-modern contexts reflect a common set of generative processes. © 2017 The Authors.

  6. Reflections on the Cultural Encounter between the Jews and the Greeks and Romans in Jewish Coin Iconography of the Hellenistic-Roman Period

    DEFF Research Database (Denmark)

    Lykke, Anne

    2017-01-01

    Contrary to the written and archaeological sources, the numismatic material from the Persian, Hellenistic, and particularly the Roman Imperial periods in Palestine constitutes an almost uninterrupted material source from which detailed knowledge can be drawn concerning the political, cultural and......—by extension—even social processes. In this article examples reflecting the results of the cultural encounter between the Jewish and the Greco-Roman world are discussed, which are well illustrated by the differences in the iconography of the Jewish coinages of the first century BCE and first century CE...

  7. Frequency of Sports Trauma in Elite National Level Greco-Roman Wrestling Competitions

    OpenAIRE

    Akbarnejad, Ali; Sayyah, Mansour

    2012-01-01

    Background Trauma is an inescapable part of sports competitions. It occurs more frequently in contact sports such as wrestling. Objectives The purpose of this study was to determine the frequency of injury in Greco-Roman style wrestling competitions at national level. Patients and Methods This descriptive epidemiological research included 50 Greco-Roman style wrestlers who participated in national level competitions between the years 2003 and 2008. A questionnaire was completed by each partic...

  8. Transfiguring the Dead: The Iconography, Commemorative Use, and Materiality of Mummy Shrouds from Roman Egypt

    OpenAIRE

    Jimenez, Lissette Marie

    2014-01-01

    The mummy shrouds, often overlooked or dissected into dichotomous parts because of their Hellenistic and Egyptian hybrid pictorial nature, provide unparalleled insight into religious and social facets of life and death in Roman Egypt. Moving beyond the aesthetic properties of these objects and focusing on the symbolic and material functions of the iconography on the shrouds enables a fuller understanding of individual and collective social aspirations of the inhabitants of Roman Egypt. When v...

  9. The Roman Road System in the Golan: Highways, Paths and Tracks in Quotidian Life

    OpenAIRE

    Pažout Adam

    2017-01-01

    Roman Imperial Roads (highways) built, maintained and organized by the Roman army and provincial authorities were studied in the Golan Heights since Schumacher’s surveys in the 1880s. However, most of these were obliterated by building and agricultural activity since the beginning of the 20th century. Local ancient road system, linking individual communities and their agricultural land was never studied, since it barely leaves a trace in archaeological record. This paper presents reconstructi...

  10. Mas Gusó: a Roman military Settlement in the suburbium of Emporiae

    Directory of Open Access Journals (Sweden)

    Josep Casas Genover

    2016-11-01

    Full Text Available Although the site of Mas Gusó (province of Girona has been interpreted as a Roman uilla, this is actually a public building. Its existence have to be contextualized within the frame of the structures established by the Roman authority for territorial control closely linked to the creation of a new road network and a tax collection system. We also analyse its survival until the 3rd century AD, which are closely related to the nearby city of Emporiae.

  11. Creating a provincial landscape: roman imperialism and rural change in Lusitania

    Directory of Open Access Journals (Sweden)

    J. C Edmondson

    2010-02-01

    Full Text Available SUMMARY: This paper suggests some general approaches and raises some problems in studying the impact of Rome on the rural landscape in Lusitania. It concentrates on three crucial ways in which the landscape was transformed under Roman rule: (a changes in the pattern of rural settlement; (b changes in the nature of land use and agrarian exploitation; and (c changes in the ways in which the inhabitants of Lusitania perceived and thought about their world. It argues that a synthesis is needed of archaeological evidence from across the province, so that the impact of Rome on rural settlemet patterns may be compared in differing environmental regions. Further intensive field survey should also help to resolve some current problems in reconstructing the pattern of Iron Age and Roman rural settlement. Increased collection and analysis of pollen samples, carbonised wood, seeds, agricultural implements and animal bones is needed to assess more precisely the extent to which the Romans caused major changes in the nature of land use and agrarian exploitation. When accounting for change, it is essential to consider a wide variety of factors and to remember that rural change continued to occur throughout the Roman period. Finally, it was in forcing the inhabitants of Lusitania to perceive their world in radically new ways that the Romans made a lasting impact on the provincial landscape. First, the Romans created broad ethnic identities for their opponents, ignoring the complex, highly fragmented ethnic and regional geography of the area. Then by dividing the region into clearly defined civitates, they forced the inhabitants of Lusitania to envisage the landscape in a very different manner than before. Finally, a series of rituals emphasising Roman power (the census, the holding of judicial assizes, and the activities of the provincial council regularly reinforced these radically new mental maps of the new Roman provincial landscape.

  12. Imperial Policy and the Integration of Gaul into the Roman Empire

    Science.gov (United States)

    2015-06-12

    ECONOMIC BENEFITS OF EMPIRE From as early as the second century BC Gaul had a taste for the material outputs of the Roman economy. Wine in particular...Rome tolerated the establishment of local Gallic production. This meant the growth in Gaul’s wine consumption benefited Gallic producers and not...exporter of sought after wines . Wine production was not the only industry that benefited from the Roman conquest. Complementing Gallic viticulture

  13. Quench detection of fast plasma events for the JT-60SA central solenoid

    International Nuclear Information System (INIS)

    Murakami, Haruyuki; Kizu, Kaname; Tsuchiya, Katsuhiko; Kamiya, Koji; Takahashi, Yoshikazu; Yoshida, Kiyoshi

    2012-01-01

    Highlights: ► Pick-up coil method is used for the quench detection of JT-60SA magnet system. ► Disk-shaped pick-up coils are inserted in CS module to compensate inductive voltage. ► Applicability of pick-up coil is evaluated by two dimensional analysis. ► Pick-up coil is applicable whenever disruption, mini collapse and other plasma event. - Abstract: The JT-60 is planned to be modified to a full-superconducting tokamak referred to as the JT-60 Super Advanced (JT-60SA). The maximum temperature of the magnet during its quench might reach the temperature of higher than several hundreds Kelvin that will damage the superconducting magnet itself. The high precision quench detection system, therefore, is one of the key technologies in the superconducting magnet protection system. The pick-up coil method, which is using voltage taps to detect the normal voltage, is used for the quench detection of the JT-60SA superconducting magnet system. The disk-shaped pick-up coils are inserted in the central solenoid (CS) module to compensate the inductive voltage. In the previous study, the quench detection system requires a large number of pick-up coils. The reliability of quench detection system would be higher by simplifying the detection system such as reducing the number of pick-up coils. Simplifying the quench detection system is also important to reduce the total cost of the protection system. Hence the design method is improved by increasing optimizing parameters. The improved design method can reduce the number of pick-up coils without reducing the sensitivity of detection; consequently the protection system can be designed with higher reliability and lower cost. The applicability of the disk-shaped pick-up coil for quench detection system is evaluated by the two dimensional analysis. In the previous study, however, the analysis model only took into account the CS, EF (equilibrium field) coils and plasma. Therefore, applicability of the disk-shaped pick-up coil for

  14. Development of a new discharge control system utilizing UNIX workstations and VME-bus systems for JT-60

    Energy Technology Data Exchange (ETDEWEB)

    Akasaka, Hiromi; Sueoka, Michiharu; Takano, Shoji; Totsuka, Toshiyuki; Yonekawa, Izuru; Kurihara, Kenichi; Kimura, Toyoaki [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    2002-01-01

    The JT-60 discharge control system, which had used HIDIC-80E 16 bit mini-computers and CAMAC systems since the start of JT-60 experiment in 1985, was renewed in March, 2001. The new system consists of a UNIX workstation and a VME-bus system, and features a distributed control system. The workstation performs message communication with a VME-bus system and controllers of JT-60 sub-systems and processing for discharge control because of its flexibility to construction of a new network and modifications of software. The VME-bus system performs discharge sequence control because it is suitable for fast real time control and flexible to the hardware extension. The replacement has improved the control function and reliability of the discharge control system and also has provided sufficient performance necessary for future modifications of JT-60. The new system has been running successfully since April 2001. The data acquisition speed was confirmed to be twice faster than the previous one. This report describes major functions of the discharge control system, technical ideas for developing the system and results of the initial operation in detail. (author)

  15. Roman whetstone production in northern Gaul (Belgium and northern France

    Directory of Open Access Journals (Sweden)

    Aurélie Thiébaux

    2016-10-01

    Full Text Available This paper focuses on the latest research on the production of Roman whetstones in northern Gaul. To date, little has been written about this specialised industry. However, three workshops producing whetstones were discovered recently in the north of Gaul in Buizingen (Province of Flemish Brabant, Belgium, Nereth (Province of Liège, Belgium and Le Châtelet-sur-Sormonne (Department of Ardennes, France. Production debris and rough-outs recovered at these sites allowed us to reconstruct the operational sequence of manufacture, from the choice of raw material to the finished product. Technological studies enabled us to determine the production stages and highlight the similarities and differences between the three study areas. Analyses of the materials reveal the use of fine-grained sedimentary and low-grade metamorphic rocks outcropping near the workshops. All these rocks are linked to the Caledonian inliers of Brabant-London, Stavelot-Venn, and Rocroi. The large amount of waste found at Le Châtelet-sur-Sormonne, far more than that recovered at Buizingen and Nereth, is indicative of the economic importance of this whetstone workshop. This importance is reflected in the fact that whetstones from Le Châtelet-sur-Sormonne are distributed over a large area throughout Belgium, France (Nord-Pas-de-Calais, Picardie and Champagne-Ardenne regions, Germany, and the Netherlands. This paper presents the waste and rough-outs from the three production sites. It also defines rock types and their origins and offers insights into whetstone manufacturing processes and techniques.

  16. Classifying and Visualising Roman Pottery using Computer-scanned Typologies

    Directory of Open Access Journals (Sweden)

    Jacqueline Christmas

    2018-05-01

    Full Text Available For many archaeological assemblages and type-series, accurate drawings of standardised pottery vessels have been recorded in consistent styles. This provides the opportunity to extract individual pot drawings and derive from them data that can be used for analysis and visualisation. Starting from PDF scans of the original pages of pot drawings, we have automated much of the process for locating, defining the boundaries, extracting and orientating each individual pot drawing. From these processed images, basic features such as width and height, the volume of the interior, the edges, and the shape of the cross-section outline are extracted and are then used to construct more complex features such as a measure of a pot's 'circularity'. Capturing these traits opens up new possibilities for (a classifying vessel form in a way that is sensitive to the physical characteristics of pots relative to other vessels in an assemblage, and (b visualising the results of quantifying assemblages using standard typologies. A frequently encountered problem when trying to compare pottery from different archaeological sites is that the pottery is classified into forms and labels using different standards. With a set of data from early Roman urban centres and related sites that has been labelled both with forms (e.g. 'platter' and 'bowl' and shape identifiers (based on the Camulodunum type-series, we use the extracted features from images to look both at how the pottery forms cluster for a given set of features, and at how the features may be used to compare finds from different sites.

  17. Technical aspects and manufacturing methods for JT-60SA toroidal field coil casings

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, Paolo, E-mail: paolo.rossi@enea.it [ENEA, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Cucchiaro, A.; Brolatti, G.; Cocilovo, V.; Ginoulhiac, G.; Polli, G. [ENEA, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Gabriele, M.; Di Muzio, F. [Walter Tosto, Via Erasmo Piaggio, 66100 Chieti (Italy); Philips, G.; Tomarchio, V. [JT-60SA European Home Team, Boltzmannstrasse 2, D-85748 Garching (Germany)

    2014-10-15

    Highlights: • A contract between ENEA and Walter Tosto started on July 2012 for the construction of 18 TF coil casings for JT-60SA. • Design and manufacturing of mock-ups representative of straight and curved legs of the casings have been completed. • Final design of the casings has been completed and manufacturing activities have already started and are ongoing. • The completion of the first three casings will be completed within the end of 2013 and the production of all the 18 casings is foreseen by the end of 2015. - Abstract: JT-60SA is a superconducting tokamak machine to be assembled in Naka site, Japan, designed to contribute to the early realization of fusion energy by supporting the exploitation of ITER and research toward DEMO. In the frame of the Broader Approach Agreement a contract between ENEA and Walter Tosto (Chieti, Italy) started on July 2012 for the construction of 18 TF coil casings for JT-60SA. Two different sets of 9 casings each will be progressively delivered, from 2013 to the end of 2015, to ASG Superconductors (Genoa, Italy) and to Alstom (Belfort, France), where the integration of the winding pack into the casing will be carried out. Each TF coil casing (height 7.5 m and width 4.5 m) consists of four main components: one “Straight Leg Outboard” and one “Curved Leg Outboard” both with their own covers, “Straight Leg Inboard” and “Curved Leg Inboard”. The casing components are segmented in forgings and plates made of FM316LNL. The straight leg outboard is composed of two wings welded to a central core and two elbows welded at the ends with a cooling channel installed inside. Elbows of straight leg outboard are segmented in two half-elbows machined from 1 rough forging and welded to the central core made by plate. Welding of wings to the central core is performed in EBW (electron beam welding) and the straight part is welded to the elbows by NGTIG (TIG narrow gap) process. The curved leg outboard is composed of two

  18. Technical aspects and manufacturing methods for JT-60SA toroidal field coil casings

    International Nuclear Information System (INIS)

    Rossi, Paolo; Cucchiaro, A.; Brolatti, G.; Cocilovo, V.; Ginoulhiac, G.; Polli, G.; Gabriele, M.; Di Muzio, F.; Philips, G.; Tomarchio, V.

    2014-01-01

    Highlights: • A contract between ENEA and Walter Tosto started on July 2012 for the construction of 18 TF coil casings for JT-60SA. • Design and manufacturing of mock-ups representative of straight and curved legs of the casings have been completed. • Final design of the casings has been completed and manufacturing activities have already started and are ongoing. • The completion of the first three casings will be completed within the end of 2013 and the production of all the 18 casings is foreseen by the end of 2015. - Abstract: JT-60SA is a superconducting tokamak machine to be assembled in Naka site, Japan, designed to contribute to the early realization of fusion energy by supporting the exploitation of ITER and research toward DEMO. In the frame of the Broader Approach Agreement a contract between ENEA and Walter Tosto (Chieti, Italy) started on July 2012 for the construction of 18 TF coil casings for JT-60SA. Two different sets of 9 casings each will be progressively delivered, from 2013 to the end of 2015, to ASG Superconductors (Genoa, Italy) and to Alstom (Belfort, France), where the integration of the winding pack into the casing will be carried out. Each TF coil casing (height 7.5 m and width 4.5 m) consists of four main components: one “Straight Leg Outboard” and one “Curved Leg Outboard” both with their own covers, “Straight Leg Inboard” and “Curved Leg Inboard”. The casing components are segmented in forgings and plates made of FM316LNL. The straight leg outboard is composed of two wings welded to a central core and two elbows welded at the ends with a cooling channel installed inside. Elbows of straight leg outboard are segmented in two half-elbows machined from 1 rough forging and welded to the central core made by plate. Welding of wings to the central core is performed in EBW (electron beam welding) and the straight part is welded to the elbows by NGTIG (TIG narrow gap) process. The curved leg outboard is composed of two

  19. Roman primacy and the development of the synodal institution in the period of the Arian controversy

    Directory of Open Access Journals (Sweden)

    Zakharov Georgii

    2015-01-01

    Full Text Available The object of this study is process of evolution of church organization in the 4th century, especially the relationships between Roman primacy and synodal institution in the epoch of the Arian controversy. The author examines evolution of the institution of the Roman synod and practice of participation of the Roman See in church councils outside Rome, focusing on the unsuccessful attempt to convene the general council in Rome in 382. Analysis of historical data shows that the ability of the Roman see to organize in a short time a representative council (mainly of the Italian bishops allowed Rome to claim for a special status within the church communion. In the same time the Roman See did not become in the 4th century the center of conciliar activity at the universal level. Participation of Rome in Ecumenical and Western councils was quite passive. In the second part of the paper the author attempts to reconstruct various models of church organization, which were typical for the western and the eastern episcopate in the 4th century. The author concludes that the real initiator of the development of universal primacy of Rome was not originally the pope, but the western episcopate (council of Serdica, 343. In the second part of the 4th century pope Damasus developed this conception, putting the principle of primacy of the Roman See as the chair of Peter above principle of synodal consensus. At the same time eastern bishops considered the Roman chair as the center of the West, rather than the head of the whole Church. Sometimes they invited bishop of Rome and other western bishops to act as arbiters in the eastern conflicts, but more often they defended the idea of full autonomy of the East.

  20. A Conceptual Design Study for the Error Field Correction Coil Power Supply in JT-60SA

    International Nuclear Information System (INIS)

    Matsukawa, M.; Shimada, K.; Yamauchi, K.; Gaio, E.; Ferro, A.; Novello, L.

    2013-01-01

    This paper describes a conceptual design study for the circuit configuration of the Error Field Correction Coil (EFCC) power supply (PS) to maximize the expected performance with reasonable cost in JT-60SA. The EFCC consists of eighteen sector coils installed inside the vacuum vessel, six in the toroidal direction and three in the poloidal direction, each one rated for 30 kA-turn. As a result, star point connection is proposed for each group of six EFCC coils installed cyclically in the toroidal direction for decoupling with poloidal field coils. In addition, a six phase inverter which is capable of controlling each phase current was chosen as PS topology to ensure higher flexibility of operation with reasonable cost.

  1. Four giga joule flywheel motor-generator for JT-60 toroidal field coil power supply system

    International Nuclear Information System (INIS)

    Matsukawa, T.; Kanke, M.; Shimada, R.; Yoshida, Y.; Yamashita, K.; Nakayama, T.

    1986-01-01

    A fusion test reactor often needs motor-generators as a power source in order to reduce disturbances to utility lines. The toroidal field coil power supply system of JT-60 also adopted a motor-generator for this purpose. The motor-generator started operation in April, 1985 at Japan Atomic Energy Research Institute together with the whole system. The motor-generator has several special features both electrically and mechanically. One electrical feature is that it is used as a pulse source of large current and power for periodic short-time duty. A mechanical feature is that a large flywheel is directly coupled to the motor-generator shaft and operated intermittently and at high speed. Therefore detailed investigations were carried out concerning constitution, characteristics as well as the coordination with the system performance. This paper describes the outlines of the flywheel motor-generator and discusses several topics

  2. Fast neutron-gamma discrimination on neutron emission profile measurement on JT-60U

    International Nuclear Information System (INIS)

    Ishii, K.; Okamoto, A.; Kitajima, S.; Sasao, M.; Shinohara, K.; Ishikawa, M.; Baba, M.; Isobe, M.

    2010-01-01

    A digital signal processing (DSP) system is applied to stilbene scintillation detectors of the multichannel neutron emission profile monitor in JT-60U. Automatic analysis of the neutron-γ pulse shape discrimination is a key issue to diminish the processing time in the DSP system, and it has been applied using the two-dimensional (2D) map. Linear discriminant function is used to determine the dividing line between neutron events and γ-ray events on a 2D map. In order to verify the validity of the dividing line determination, the pulse shape discrimination quality is evaluated. As a result, the γ-ray contamination in most of the beam heating phase was negligible compared with the statistical error with 10 ms time resolution.

  3. Design and analysis of plasma position and shape control in superconducting tokamak JT-60SC

    Energy Technology Data Exchange (ETDEWEB)

    Matsukawa, M. E-mail: matsukaw@naka.jaeri.go.jp; Ishida, S.; Sakasai, A.; Urata, K.; Senda, I.; Kurita, G.; Tamai, H.; Sakurai, S.; Miura, Y.M.; Masaki, K.; Shimada, K.; Terakado, T

    2003-09-01

    The analyses of the plasma position and shape control in the superconducting tokamak JT-60SC in JAERI are presented. The vacuum vessel and stabilizing plates located closely to the plasma are modeled in 3 dimension, and we can take into account the large ports in the vacuum vessel. The linear numerical model used in the design for the plasma feedback control system is based on Grad-Shafranov equation, which allows the plasma surface deformation. For a slower control of the plasma shape, the superconducting equilibrium field (EF) coils outside toroidal field coils are used, while for a fast control of the plasma position, in-vessel normal conducting coils (IV coil) are used. It is shown that the available loop voltages of the EF and IV coils are very limited, but there are sufficient accuracy and acceptable response time of plasma position and shape control.

  4. Design and analysis of plasma position and shape control in superconducting tokamak JT-60SC

    International Nuclear Information System (INIS)

    Matsukawa, M.; Ishida, S.; Sakasai, A.; Urata, K.; Senda, I.; Kurita, G.; Tamai, H.; Sakurai, S.; Miura, Y.M.; Masaki, K.; Shimada, K.; Terakado, T.

    2003-01-01

    The analyses of the plasma position and shape control in the superconducting tokamak JT-60SC in JAERI are presented. The vacuum vessel and stabilizing plates located closely to the plasma are modeled in 3 dimension, and we can take into account the large ports in the vacuum vessel. The linear numerical model used in the design for the plasma feedback control system is based on Grad-Shafranov equation, which allows the plasma surface deformation. For a slower control of the plasma shape, the superconducting equilibrium field (EF) coils outside toroidal field coils are used, while for a fast control of the plasma position, in-vessel normal conducting coils (IV coil) are used. It is shown that the available loop voltages of the EF and IV coils are very limited, but there are sufficient accuracy and acceptable response time of plasma position and shape control

  5. Dynamic transport study of the plasmas with transport improvement in LHD and JT-60U

    International Nuclear Information System (INIS)

    Ida, K.; Inagaki, S.; Sakamoto, R.; Tanaka, K.; Funaba, H.; Kubo, S.; Yoshinuma, M.; Shimozuma, T.; Takeiri, Y.; Ikeda, K.; Michael, C.; Tokuzawa, T.; Sakamoto, Yoshiteru; Takenaga, Hidenobu; Isayama, Akihiko; Ide, Shunsuke; Fujita, Takaaki

    2006-10-01

    A transport analysis during the transient phase of heating (a dynamic transport study) applied to the plasma with internal transport barriers (ITBs) in the Large Helical Device (LHD) heliotron and JT-60U tokamak is described. In the dynamic transport study 1) a slow transition between two transport branches is observed, 2) the time of the transition from the L-mode plasma to the ITB plasma is clearly determined by the onset of the flattening of the temperature profile in the core region and 3) a spontaneous phase transition from a weak, wide ITB to a strong, narrow ITB and its back-transition are observed. The flattening of the core region of the ITB transition and the back-transition between a wide ITB and a narrow ITB suggest the strong interaction of turbulent transport in space, where turbulence suppression at certain locations in the plasma causes the enhancement of turbulence and thermal diffusivity nearby. (author)

  6. Characteristics of internal transport barrier in JT-60U reversed shear plasmas

    International Nuclear Information System (INIS)

    Sakamoto, Y.; Kamada, Y.; Ide, S.; Fujita, T.; Shirai, H.; Takizuka, T.; Koide, Y.; Fukuda, T.; Oikawa, T.; Suzuki, T.; Shinohara, K.; Yoshino, R.

    2001-01-01

    Characteristics of internal transport barrier (ITB) structure are studied and the active ITB control has been developed in JT-60U reversed shear plasmas. The following results are found. Outward propagation of the ITB with steep T i gradient is limited to the minimum safety factor location (ρ qmin ). However the ITB with reduced T i gradient can move to the outside of ρ qmin . Lower boundary of ITB width is proportional to the ion poloidal gyroradius at the ITB center. Furthermore the demonstration of the active control of the ITB strength based on the modification of the radial electric field shear profile is successfully performed by the toroidal momentum injection in different directions or the increase of heating power by neutral beams. (author)

  7. Simple multijunction launcher with oversized waveguides for lower hybrid current drive on JT-60U

    International Nuclear Information System (INIS)

    Ikeda, Y.; Naito, O.; Seki, M.; Kondoh, T.; Ide, S.; Anno, K.; Fukuda, H.; Ikeda, Y.; Kitai, T.; Kiyono, K.; Sawahata, M.; Shinozaki, S.; Suganuma, K.; Suzuki, N.; Ushigusa, K.

    1994-01-01

    A multijunction technique with oversized waveguides has been developed for the lower hybrid current drive launcher on JT-60U. The launcher consists of 4 (toroidal)x4 (poloidal) multijunction modules. RF power in the module is divided toroidally into 12 sub-waveguides at a junction point through an oversized waveguide. This method simplifies the structure of the multijunction launcher with a large number of subwaveguides. A maximum power density up to 25 MW m -2 has been achieved with a low reflection coefficient of less than 2%. The coupling and current drive efficiency are well explained by the designed wave spectra without taking account of higher modes in the oversize waveguides. Thus, the simple multijunction launcher has been demonstrated to excite expected wave spectra with high power handling capability. ((orig.))

  8. Localized MHD activity near transport barriers in JT-60U and TFTR

    International Nuclear Information System (INIS)

    Manickam, J.

    2001-01-01

    Localized MHD activity observed in JT-60U and TFTR near transport barriers with their associated large pressure gradients is investigated. Stability analysis of equilibria modeling the experiments supports an identification of this MHD as being due to an ideal MHD n=1 instability. The appearance of the instability depends on the local pressure gradient, local shear in the q profile and the proximity of rational surfaces where q∼m/n and m and n are the poloidal and toroidal mode numbers respectively. The mode width is shown to depend on the local value of q, and is larger when q is smaller. In addition the role of the edge current density in coupling the internal mode to the plasma edge and of the energetic particles which can drive fishbone like modes is investigated. (author)

  9. Stable existence of central current hole in the JT-60U tokamak

    International Nuclear Information System (INIS)

    Miura, Y.; Fujita, T.; Oikawa, T.

    2003-01-01

    In an extreme state of a reversed magnetic shear configuration, it was found in JT-60U that there is almost no plasma current in the central region (called Current Hole). The Current Hole region extends to 40% of the plasma minor radius and it exists stably for several seconds. The Current Hole is formed by the growth of the bootstrap current and it is impossible to drive current in either positive or negative direction by ECH or N-NB inside the Current Hole. In that region, there is almost no gradient of density, temperature and toroidal rotation velocity. It means that there is almost no confinement in the Current Hole and the large energy in that region is sustained only by an internal transport barrier (ITB). The effects of the Current Hole on particle orbits and the effects on an error field on the Current Hole are also discussed. (author)

  10. Identity physics experiment on internal transport barriers in JT-60U and JET

    Energy Technology Data Exchange (ETDEWEB)

    De Vries, P C; Beurskens, M N A; Brix, M; Giroud, C; Hawkes, N C; Parail, V [EURATOM/UKAEA Association, Culham Science Centre, OX14 3DB, Abingdon (United Kingdom); Sakamoto, Y; Fujita, T; Hayashi, N; Matsunaga, G; Oyama, N; Shinohara, K; Suzuki, T; Takechi, M [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Litaudon, X; Joffrin, E [CEA, IRFM, F-13108 St-Paul-Lez-Durance (France); Crombe, K [Department of Applied Physics, Ghent University, Rozier 44, 9000 Gent (Belgium); Mantica, P [Istituto di Fisica del Plasma, EURATOM/ENEA-CNR Association, Milano (Italy); Salmi, A [Association Euratom-Tekes, Helsinki University of Technology, PO Box 4100 (Finland); Strintzi, D, E-mail: Peter.de.Vries@jet.u [National Technical University of Athens, EURATOM Association, GR-15773, Athens (Greece)

    2009-12-15

    A series of experiments have been carried out in 2008 at JT-60U and JET to find common characteristics and explain differences between internal transport barriers (ITBs). The identity experiments succeeded in matching the profiles of most dimensionless parameters at the time ITBs were triggered. Thereafter the q-profile development deviated due to differences in non-inductive current density profile, affecting the ITB. Furthermore, the ITBs in JET were more strongly influenced by the H-mode pedestal or edge localized modes. It was found to be difficult to match the plasma rotation characteristics in both devices. However, the wide range of Mach numbers obtained in these experiments shows that the rotation has little effect on the triggering of ITBs in plasmas with reversed magnetic shear. On the other hand the toroidal rotation and more specifically the rotational shear had an impact on the subsequent growth and allowed the formation of strong ITBs.

  11. Formation conditions for electron internal transport barriers in JT-60U plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Fujita, T [Japan Atomic Energy Research Institute, Naka Fusion Research Establishment, Naka-machi, Naka-gun, Ibaraki 311-0193 (Japan); Fukuda, T [Osaka University, Suita, Osaka 565-0871 (Japan); Sakamoto, Y [Japan Atomic Energy Research Institute, Naka Fusion Research Establishment, Naka-machi, Naka-gun, Ibaraki 311-0193 (Japan); Ide, S [Japan Atomic Energy Research Institute, Naka Fusion Research Establishment, Naka-machi, Naka-gun, Ibaraki 311-0193 (Japan); Suzuki, T [Japan Atomic Energy Research Institute, Naka Fusion Research Establishment, Naka-machi, Naka-gun, Ibaraki 311-0193 (Japan); Takenaga, H [Japan Atomic Energy Research Institute, Naka Fusion Research Establishment, Naka-machi, Naka-gun, Ibaraki 311-0193 (Japan); Ida, K [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Idei, H [Kyushu University, Kasuga, Fukuoka 816-8580 (Japan); Shimozuma, T [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Fujisawa, A [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Ohdachi, S [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Toi, K [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan)

    2004-05-01

    The formation of electron internal transport barriers (ITBs) was studied using electron cyclotron (EC) heating in JT-60U positive shear (PS) and reversed shear (RS) plasmas with scan of neutral beam (NB) power. With no or low values of NB power and with a small radial electric field (E{sub r}) gradient, a strong, box-type electron ITB was formed in RS plasmas while a peaked profile with no strong electron ITBs was observed in PS plasmas within the available EC power. When the NB power and the E{sub r} gradient were increased, the electron transport in strong electron ITBs with EC heating in RS plasmas was not affected, while electron thermal diffusivity was reduced in conjunction with the reduction of ion thermal diffusivity, and strong electron and ion ITBs were formed in PS plasmas.

  12. Dynamic transport study of the plasmas with transport improvement in LHD and JT-60U

    International Nuclear Information System (INIS)

    Ida, K.; Inagaki, S.; Sakamoto, R.; Tanaka, K.; Fujita, T.; Funaba, H.; Kubo, S.; Yoshinuma, M.; Shimozuma, T.; Takeiri, Y.; Ikeda, K.; Michael, C.; Tokuzawa, T.; Sakamoto, Y.; Takenaga, H.; Isayama, A.; Matsunaga, G.; Ide, S.

    2009-01-01

    Transport analysis during the transient phase of heating (a dynamic transport study) applied to the plasma with internal transport barriers (ITBs) in the Large Helical Device (LHD) heliotron and the JT-60U tokamak is described. In the dynamic transport study the time of transition from the L-mode plasma to the ITB plasma is clearly determined by the onset of flattening of the temperature profile in the core region and a spontaneous phase transition from a zero curvature ITB (hyperbolic tangent shaped ITB) or a positive curvature ITB (concaved shaped ITB) to a negative curvature ITB (convex shaped ITB) and its back-transition are observed. The flattening of the core region of the ITB transition and the back-transition between a zero curvature ITB and a convex ITB suggest the strong interaction of turbulent transport in space.

  13. Core density fluctuations in reverse magnetic shear plasmas with internal transport barrier on JT-60U

    International Nuclear Information System (INIS)

    Nazikian, R.; Shinohara, K.; Yoshino, R.; Fujita, T.; Shirai, H.; Kramer, G.T.

    1999-01-01

    First measurements of the radial correlation length of density fluctuations in JT-60U plasmas with internal transport barrier (ITB) is reported. The measurements are obtained using a newly installed correlation reflectometer operating in the upper X-mode. Before transport barrier formation in the low beam power current ramp-up phase of the discharge, reflectometer measurements indicate density fluctuation levels n-tilde/n∼0.1-0.2% and radial correlation lengths 2-3 cm (k r p i ≤0.5) in the central plasma region (r/a r p i ∼3. However, fluctuation levels are considerably higher than measured near the magnetic axis. Reflectometer measurements obtained at the foot of the ITB also indicate high fluctuation levels compared to measurements in the central region of the discharge. (author)

  14. Investigation and measures to noise on spectroscopic measurement system in JT-60U

    International Nuclear Information System (INIS)

    Nagaya, Susumu; Kubo, Hirotaka; Sugie, Tatsuo; Onizawa, Masami; Kawai, Isao; Nakata, Hisao.

    1997-11-01

    Breakdown of a negative-ion-based neutral beam injection (N-NBI) has caused noise trouble to several systems. The control circuit of a spectroscopic measurement system had not well worked because of the noise. The noise has been measured by an optical-fiber isolation system during operation of JT-60U. The amplitude and the frequency were 15-18 V and 15 MHz respectively. The transmission noise has been reduced by putting ferrite cores to all cables connecting with the control circuits. As a result, the trouble with the spectroscopic measurement system has completely been solved. Adding condensers and resistors to the circuit was not effective to reduce the noise. (author)

  15. Development of hard-seal gate valve and fast shutter for JT-60 neutral beam injectors

    International Nuclear Information System (INIS)

    Kuribayashi, S.; Minami, M.; Matsuoka, T.; Takeshita, K.; Morita, H.; Kuriyama, M.; Matsuda, S.; Shirakata, H.

    1983-01-01

    A 600 mm hard-seal valve and a fast shutter for the JT-60 Neutral Beam Injector were developed. The 600 mm hard-seal gate valve was fabricated and tested for 500 cycles at various temperatures of up to 250 0 C. In consequence, requirements of the endurance and vacuum tightness were satisfied. Major components of the fast shutter, i.e., swing action bellows and a high-speed pneumatic cylinder, were tested for 30,000 cycles, and their reliability was confirmed. Then the fast shutter was fabricated and tested. The test result indicated that the fast shutter fully satisfied the requirements of the molecular gas flow conductance and opening/closing speed. (author)

  16. Hydrogen isotope distributions and retentions in the inner divertor tile of JT-60U

    Energy Technology Data Exchange (ETDEWEB)

    Oya, Y. [Radioisotope Center, University of Tokyo, 2-11-16 Yayoi, Bunkyo-ku, Tokyo 113-0032 (Japan)]. E-mail: yoya@ric.u-tokyo.ac.jp; Hirohata, Y. [Graduate School of Engineering, Hokkaido University, Sapporo 060-8628 (Japan); Tanabe, T. [Graduate School of Engineering, Nagoya University, Nagoya 464-8603 (Japan); Shibahara, T. [Graduate School of Engineering, Nagoya University, Nagoya 464-8603 (Japan); Kimura, H. [Faculty of Science, Shizuoka University, Shizuoka 422-8529 (Japan); Oyaidzu, M. [Faculty of Science, Shizuoka University, Shizuoka 422-8529 (Japan); Arai, T. [Naka Fusion Establishment, Japan Atomic Energy Research Institute, Naka-machi, Naka-gun, Ibaraki 311-0193 (Japan); Masaki, K. [Naka Fusion Establishment, Japan Atomic Energy Research Institute, Naka-machi, Naka-gun, Ibaraki 311-0193 (Japan); Gotoh, Y. [Naka Fusion Establishment, Japan Atomic Energy Research Institute, Naka-machi, Naka-gun, Ibaraki 311-0193 (Japan); Okuno, K. [Faculty of Science, Shizuoka University, Shizuoka 422-8529 (Japan); Miya, N. [Naka Fusion Establishment, Japan Atomic Energy Research Institute, Naka-machi, Naka-gun, Ibaraki 311-0193 (Japan); Hino, T. [Graduate School of Engineering, Hokkaido University, Sapporo 060-8628 (Japan); Tanaka, S. [Graduate School of Engineering, University of Tokyo, Tokyo 113-8656 (Japan)

    2005-11-15

    Retention profiles of hydrogen and deuterium in graphite tiles placed in the inner divertor region of JT-60U were analyzed by secondary ion mass spectroscopy (SIMS) and thermal desorption spectroscopy (TDS). The difference in hydrogen and deuterium retention behaviour is discussed considering the frequency of the strike-point hit and history of NBI heating power. It was found that most of hydrogen/deuterium was retained in the deposited layers, HH deposition layers/DD deposition layers or co-deposited with carbon. Owing to the higher heating power of DD discharges, the deuterium concentration in the DD deposition layers was much lower than that of hydrogen in the HH deposition layers. On the area showing no deposition, very shallow profile of deuterium dominated hydrogen profile. These results indicate that the tritium retention is strongly influenced by the history of discharge and temperatures. Tritium retention on graphite tiles and deposition layers could be significantly reduced with increasing the operation temperature.

  17. Hydrogen isotope distributions and retentions in the inner divertor tile of JT-60U

    International Nuclear Information System (INIS)

    Oya, Y.; Hirohata, Y.; Tanabe, T.; Shibahara, T.; Kimura, H.; Oyaidzu, M.; Arai, T.; Masaki, K.; Gotoh, Y.; Okuno, K.; Miya, N.; Hino, T.; Tanaka, S.

    2005-01-01

    Retention profiles of hydrogen and deuterium in graphite tiles placed in the inner divertor region of JT-60U were analyzed by secondary ion mass spectroscopy (SIMS) and thermal desorption spectroscopy (TDS). The difference in hydrogen and deuterium retention behaviour is discussed considering the frequency of the strike-point hit and history of NBI heating power. It was found that most of hydrogen/deuterium was retained in the deposited layers, HH deposition layers/DD deposition layers or co-deposited with carbon. Owing to the higher heating power of DD discharges, the deuterium concentration in the DD deposition layers was much lower than that of hydrogen in the HH deposition layers. On the area showing no deposition, very shallow profile of deuterium dominated hydrogen profile. These results indicate that the tritium retention is strongly influenced by the history of discharge and temperatures. Tritium retention on graphite tiles and deposition layers could be significantly reduced with increasing the operation temperature

  18. LHCD current profile control experiments towards steady state improved confinement on JT-60U

    International Nuclear Information System (INIS)

    Ide, S.; Naito, O.; Oikawa, T.; Fujita, T.; Kondoh, T.; Seki, M.; Ushigusa, K.

    2001-01-01

    In JT-60U lower hybrid current drive (LHCD) experiments, a reversed magnetic shear configuration that was accompanied by the internal transport barriers was successfully maintained by means of LHCD almost in the full current drive quasi-steady state for 4.7 s. The normalized beta was kept near 1 and the neutron emission rate was almost steady as well indicating no accumulation of impurities into the plasma. Diagnostics data showed that all the profiles of the electron and ion temperatures, the electron density and the current profile were almost unchanged during the LHCD phase. Moreover, capability of LHCD in H-mode plasmas has been also investigated. It was found that the lower hybrid waves can be coupled to an H-mode edge plasma even with the plasma wall distance of about 14 cm. The maximum coupling distance was found to depend on the edge recycling. (author)

  19. Design study of a negative-ion based NBI system for JT-60U

    International Nuclear Information System (INIS)

    Akino, Noboru; Araki, Masanori; Ebisawa, Noboru

    1994-03-01

    A high energy negative-ion based NBI system for JT-60U has been designed. The objective of the NBI system is to demonstrate mega-ampere level NB current drive and plasma core heating in a reactor-grade high density plasma. This is the first negative-ion based NBI system in the world. The required specifications of the NBI system are; a beam energy of 500 keV, an injection power of 10 MW, a beam pulse duration of 10 sec with a duty cycle of 1/60 and a beam species of deuterium or hydrogen. The neutral beam power of 10 MW is injected tangentially using one beam-line with two large negative-ion sources. The construction of the NBI system has been started, and will be operational in 1996. (author)

  20. Design of tangential viewing phase contrast imaging for turbulence measurements in JT-60SA

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, K., E-mail: ktanaka@nifs.ac.jp [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Department of Advanced Energy Engineering, Kyushu University, Kasuga, Fukuoka 816-8580 (Japan); Coda, S. [EPFL–SPC, Lausanne (Switzerland); Yoshida, M.; Sasao, H.; Kawano, Y.; Imazawa, R.; Kubo, H.; Kamada, Y. [National Institutes for Quantum and Radiological Science and Technology, Naka, Ibaraki 311-0193 (Japan)

    2016-11-15

    A tangential viewing phase contrast imaging system is being designed for the JT-60SA tokamak to investigate microturbulence. In order to obtain localized information on the turbulence, a spatial-filtering technique is applied, based on magnetic shearing. The tangential viewing geometry enhances the radial localization. The probing laser beam is injected tangentially and traverses the entire plasma region including both low and high field sides. The spatial resolution for an Internal Transport Barrier discharge is estimated at 30%–70% of the minor radius at k = 5 cm{sup −1}, which is the typical expected wave number of ion scale turbulence such as ion temperature gradient/trapped electron mode.

  1. Surface studies of tungsten erosion and deposition in JT-60U

    International Nuclear Information System (INIS)

    Ueda, Y.; Fukumoto, M.; Nishikawa, M.; Tanabe, T.; Miya, N.; Arai, T.; Masaki, K.; Ishimoto, Y.; Tsuzuki, K.; Asakura, N.

    2007-01-01

    In order to study tungsten erosion and migration in JT-60U, 13 W tiles have been installed in the outer divertor region and tungsten deposition on graphite tiles was measured. Dense local tungsten deposition was observed on a CFC tile toroidally adjacent to the W tiles, which resulted from prompt ionization and short range migration of tungsten along field lines. Tungsten deposition with relatively high surface density was found on an inner divertor tile around standard inner strike positions and on an outer wing tile of a dome. On the outer wing tile, tungsten deposition was relatively high compared with carbon deposition. In addition, roughly uniform tungsten depth distribution near the upper edge of the inner divertor tile was observed. This could be due to lift-up of strike point positions in selected 25 shots and tungsten flow in the SOL plasma

  2. Joule loss on a Faraday shield of JT-60 ICRF test antenna

    International Nuclear Information System (INIS)

    Fujii, Tsuneyuki; Saigusa, Mikio; Ikeda, Yoshitaka; Kimura, Haruyuki; Hirashima, Teruhisa; Uehara, Munenori.

    1988-01-01

    Joule loss on a Faraday shield of JT-60 ICRF test antenna with a conductive casing is investigated at the frequency range of 120 MHz. The magnetic field radiated from the antenna is measured by three-dimensionally scanning an rf probe both inside and outside the antenna casing. The magnetic field perpendicular to the Faraday shield, B x , is found to be the largest component near the Faraday shield. It consequently gives the major part of the joule loss on the Faraday shield. The temperature distribution of the Faraday shield due to joule loss is measured directly with a thermocamera. It is confirmed that the area of the high temperature rise is consistent with the peak positions of the B x field. Faraday shield resistance which is estimated from power measurements agrees with the theoretical value. (author)

  3. Improvement of the protection devices for JT-60U LHRF antenna system

    International Nuclear Information System (INIS)

    Suzuki, Sadaaki; Seki, Masami; Shinozaki, Shinichi; Sato, Fumiaki; Hiranai, Shinichi; Hasegawa, Koichi; Moriyama, Shinichi; Ishii, Kazuhiro

    2007-09-01

    In the experiments featuring lower hybrid range of frequency (LHRF) system in JT-60U, carbon grills were attached to the plasma-facing part of the antenna in order to avoid the damage by the excessive heat load from the plasma. However some electric discharge traces were found there in the observation after the experiments. To avoid such discharges, improvements of the arc detector and the protection interlock by visible picture detection were tackled. In the arc detector, the amplification circuit was improved in order to obtain shorter response time and higher resolution of optical detection. Moreover, in visible picture detection, a new function of RF-on/off control utilizing PC image processing was added to distinguish the light of the arc from one of the plasma. This report summarizes improvement of the protection interlock device in a LHRF heating system. (author)

  4. Design optimization of JT-60SU for steady-state advanced operation

    International Nuclear Information System (INIS)

    Ushigusa, K.; Kurita, G.; Toyoshima, N.

    2001-01-01

    Design optimization of JT-60SU has been done for a steady-state advanced operation. A transport code simulation indicates that a fully non-inductive reversed shear plasmas with fractions of 70% of the bootstrap current and 30% of beam driven current can be sustained for more than 1,000s without any additional control. Investigations have been progressed on MHD stability, vertical positional stability and dynamics of the vertical displacement events. Significant progress has been achieved in the R and D of Nb 3 Al superconducting wires, low induced activation material (Fe-Cr-Mn steel). A design improvement has been made in TF coils to reduce a local stress on radial disk. Dynamic behaviors of the tokamak machine have been analyzed at emergency events such as an earthquake. (author)

  5. Recent results on steady state and confinement improvement research on JT-60U

    International Nuclear Information System (INIS)

    Ide, Shunsuke

    2000-01-01

    On the JT-60U tokamak, fusion plasma research for realization of a steady state tokamak reactor has been pursued. Towards that goal, confinement improved plasmas such as H-mode, high β p , reversed magnetic shear (RS) and latter two combined with H-mode edge pedestal have been developed and investigated intensively. A key issue to achieve non-inductive current drive relevant to a steady state fusion reactor is to increase the fraction of the bootstrap current and match the spatial profile to the optimum. In 1999, as the result of the optimization, the equivalent deuterium-tritium (D-T) fusion gain (Q DT eq ) of 0.5 was sustained for 0.8 s, which is roughly equal to the energy confinement time, in a RS plasma. In order to achieve a RS plasma in steady state two approach have been explored. One is to use external current driver such as lower hybrid current drive (LHCD), and by optimizing LHCD a quasi-steady RS discharge was obtained. The other approach is to utilize bootstrap current as much as possible, and with highly increased fraction of the bootstrap current, a confinement enhancement factor of 3.6 was maintained for 2.7 s in a RS plasma with H-mode edge. A heating and current drive system in the electron cyclotron range of frequency for localized heating and current drive has been installed on JT-60U, and in initial experiments a clear increase of the central electron temperature in a RS high density central region was confirmed only with injected power of 0.75 MW. (author)

  6. Review of JT-60 experimental results from June to October, 1987

    International Nuclear Information System (INIS)

    1988-03-01

    This is a prompt report on JT-60 experimental results from June to October, 1987. Experiments in hydrogen plasmas have been undertaken with up to 3.2 MA of plasma current in limiter discharges, 2.7 MA in divertor discharges, and 30 MW of total NB (H 0 → H + ) and RF injection power. In limiter discharges with ∼3 MA plasma current, the maximum central electron density of 1.3 x 10 20 m -3 and the energy confinement time of 0.15 - 0.18 sec were obtained with heating powers of 13 - 20 MW. The total plasma stored energy of 3.1 MJ, and n e (0)τ E of 1.4 - 1.8 x 10 19 m -3 sec were achieved. The best set of parameters achieved is n e (0)τ E = 1.8 x 10 19 m -3 sec and T i (0) = 3.7 KeV at plasma current of 3.2 MA. By applying deutrium discharge condition, n e (0)τ E and T i (0) enter the JT-60 target area determined by Atomic Energy Commission. Many short periods (50 - 100 ms) of H-mode phase are found in outside X-point divertor discharges with NB or NB + RF (LH or IC) heating power of more than 16 MW, although at present the energy confinement improvement is limited to within 10 %. In combined LH and NB heating of low-n-bar e discharge, the plasma stored energy increases with the same rate as NB heating only, with preferential absorption of LH wave to the high energy beam ions. In combined NB and on-axis ICRF heating of low-n-bar e discharge, a high incremental energy confinement time is obtained, with strong high energy beam ion acceleration and electron heating in the central region of the plasma. (author)

  7. Magnetic and electromagnetic prospections at the Roman city of Hadrianopolis, southern Albania

    Science.gov (United States)

    Schettino, Antonio; Perna, Roberto; Pierantoni, Pietro Paolo; Ghezzi, Annalisa; Tassi, Luca; Sforzini, David

    2017-04-01

    We report on a combined magnetic-GPR survey performed in 2015-2017 at the ancient Roman city of Hadrianopolis, located in southern Albania, in the context of the project Teatri Antichi Riuniti (TAU). The collected data supplemented previous archaeological surveys performed by the University of Macerata with the aim of promoting the valley and starting the realization of an archaeological park. Hadrianopolis was founded through a reorganization of a previous Hellenistic settlement. Starting from 2015, magnetic and GPR surveys were carried out in Hadrianopolis in order to determine the urban framework. The collected data revealed the existence of structures organized along two main different patterns, which have been interpreted as due to the superposition of Roman buildings and Late Antiquity structures. In fact, the arrangement of structures in the studied area shows a regular urban organization of Roman type separated by a less regular disposition of the buildings that can be attributed to the Byzantine age. The latter arrangement is superimposed on the previous Roman structures. A stone wall, clearly identified by the combination of magnetic anomalies and GPR images, separates the Byzantine seattlement from the genuine Roman sector.

  8. Locating the timacum maius station on the roman road lissus-naissus-ratiaria: New archaeological research

    Directory of Open Access Journals (Sweden)

    Petrović Vladimir P.

    2008-01-01

    Full Text Available As the exact location of two Timacum stations remains an open issue, the results of the latest archaeological investigations in the environs of Svrljig, southeast Serbia, seem to offer some corroborative evidence for the hypothesis proposed in our previous contribution that this might be the location of Roman Timacum Maius. A small-scale trial excavation was undertaken on the Roman site at Kalnica in the Niševac village area in July 2008. A trench 4 by 2m was opened in the zone of the site that had yielded plentiful fragments of building debris as well as small finds. A massive wall over 1m thick was found immediately beneath the surface. Built of bro­ken limestone and pebbles bound with lime mortar, it obviously was part of a larger structure. To the northeast of the wall was an area covered with fragmented roof tiles. The discovery of two ceramic tumuli embedded in the wall, indicating a wall-heating system so far unregistered on the representative Roman urban and settlement sites in Serbia, gives additional grounds to presume that this was a larger Roman settlement extending over an area of more than 5ha, possibly Timacum Maius, a station on the Roman road Lissus-Ratiaria-Naissus.

  9. Discovery of ancient Roman "highway" reveals geomorphic changes in karst environments during historic times.

    Science.gov (United States)

    Bernardini, Federico; Vinci, Giacomo; Forte, Emanuele; Furlani, Stefano; Pipan, Michele; Biolchi, Sara; De Min, Angelo; Fragiacomo, Andrea; Micheli, Roberto; Ventura, Paola; Tuniz, Claudio

    2018-01-01

    Sinkholes are a well-known geologic hazard but their past occurrence, useful for subsidence risk prediction, is difficult to define, especially for ancient historic times. Consequently, our knowledge about Holocene carbonate landscapes is often limited. A multidisciplinary study of Trieste Karst (Italy), close to early Roman military fortifications, led to the identification of possible ancient road tracks, cut by at least one sinkhole. Electrical Resistivity Tomography through the sinkhole has suggested the presence of a cave below its bottom, possibly responsible of the sinkhole formation, while Ground Penetrating Radar has detected no tectonic disturbances underneath the tracks. Additionally, archaeological surveys led to the discovery of over 200 Roman shoe hobnails within or close to the investigated route. According to these data, the tracks are interpreted as the remains of a main Roman road, whose itinerary has been reconstructed for more than 4 km together with other elements of ancient landscape. Our results provide the first known evidence of a Roman main road swallowed by sinkholes and suggest that Holocene karst landscapes could be much different from what previously believed. In fact, sinkholes visible nowadays in the investigated region could have been flat areas filled by sediments up to the Roman time.

  10. Human parasites in the Roman World: health consequences of conquering an empire.

    Science.gov (United States)

    Mitchell, Piers D

    2017-01-01

    The archaeological evidence for parasites in the Roman era is presented in order to demonstrate the species present at that time, and highlight the health consequences for people living under Roman rule. Despite their large multi-seat public latrines with washing facilities, sewer systems, sanitation legislation, fountains and piped drinking water from aqueducts, we see the widespread presence of whipworm (Trichuris trichiura), roundworm (Ascaris lumbricoides) and Entamoeba histolytica that causes dysentery. This would suggest that the public sanitation measures were insufficient to protect the population from parasites spread by fecal contamination. Ectoparasites such as fleas, head lice, body lice, pubic lice and bed bugs were also present, and delousing combs have been found. The evidence fails to demonstrate that the Roman culture of regular bathing in the public baths reduced the prevalence of these parasites. Fish tapeworm was noted to be widely present, and was more common than in Bronze and Iron Age Europe. It is possible that the Roman enthusiasm for fermented, uncooked fish sauce (garum) may have facilitated the spread of this helminth. Roman medical practitioners such as Galen were aware of intestinal worms, explaining their existence and planning treatment using the humoural theory of the period.

  11. The Recovery and Restoration of Roman Wall Paintings in Southeast Spain

    Directory of Open Access Journals (Sweden)

    Victoria Santiago Godos

    2013-11-01

    Full Text Available Recovery of the Roman wall painting in the southeast Spanish is done, by a party's own excavations in the archaeological site, where you can find this mural in two ways, still located in the walls of Roman villas or at the foot of these walls collapsed, fragmented and even buried, making it necessary cooperation in the recovery work of the archaeologist and restorer. You can also recall Roman wall paintings in the collections of archaeological museums, as many boxes remain innumerable multitude of fragments of mural pieces found in excavations and record stored there pending further study, grading and restoration. Examples of the above are discussed.

  12. The nonagon as a tool for the drawing of the Roman Theatre of Lecce

    Directory of Open Access Journals (Sweden)

    Giampiero Mele

    2015-07-01

    Full Text Available  The signs of the Roman city of Lupiae, current Lecce, are many and among them the most noteworthy is the Roman Theatre. The monument has been accidentally discovered during the excavations for the foundations of a house in 1929  and it is located short distance from another landmark of the Roman Lecce: the amphitheatre. The chance of utilizing a the latest threedimensional technology for the detection of the  ruins was an opportunity to study the model of the survey obtained. The analysis of the latter reveals a mismatch with the instructions in “De Architectura” by Vitruvius and shows a particular use of the nonagon for the  design of its iconography. This study aims to compare the hypothesis obtained from the analysis of the metrological survey with the rules explained in the work of Vitruvio to underline similarities and differences between theory and practice.

  13. The first Cohort of Cretans, a roman military unit at Timacum Maius

    Directory of Open Access Journals (Sweden)

    Petrović Vladimir P.

    2015-01-01

    Full Text Available Archaeological investigations on the site of Niševac (Timacum Maius have been conducted over a period of eight successive years by the Institute for Balkan Studies in collaboration with the Centre for Tourism, Culture and Sports of Svrljig and the French Bordeaux-based Ausonius Institute. The 2014 campaign came up with nine Roman bricks stamped with inscriptions of the First Cohort of Cretans (Cohors I Cretum built into the walls of a Roman bath. The inscriptions provide evi­dence for the character, chronology and history of the Roman settlement. [Projekat Ministarstva nauke Republike Srbije, br. 177012: Society, spiritual and material culture and communications in prehistory and early history of the Balkans

  14. The plague under Marcus Aurelius and the decline and fall of the Roman Empire.

    Science.gov (United States)

    Fears, J Rufus

    2004-03-01

    The Roman Empire of the second century was a superpower that, in relative terms, dominated its world as much as the United States does today. In 166 AD, a plague broke out od pandemic proportions. The pandemic ravaged the entire extent of the Roman Empire, from its eastern frontiers in Iraq to its western frontiers on the Rhine River and Gaul, modern France, and western Germany. The disease is identified most often as smallpox, but it may have been anthrax. The study of bacterial DNA may enable identification of this plague that ravaged the Roman Empire at recurrent intervals for more than 100 years and that had a significant role in the decline and fall of this great superpower.

  15. Pagan and Jewish Monotheism according to Varro, Plutarch and St Paul : The Aniconic, Monotheistic Beginnings of Rome’s Pagan Cult – Romans 1.19-25 in a Roman Context

    NARCIS (Netherlands)

    van Kooten, G.H.; Hilhorst, A.; Puech,; Tigchelaar, E.

    2007-01-01

    George H. van Kooten, “Pagan and Jewish Monotheism according to Varro, Plutarch and St Paul: The Aniconic, Monotheistic Beginnings of Rome’s Pagan Cult—Romans 1:19-25 in a Roman Context,” in Flores Florentino: Dead Sea Scrolls and Other Early Jewish Studies in Honour of Florentino García Martínez

  16. LA REPRÉSENTATION DU COUPLE DANS QUELQUES ROMANS QUÉBÉCOIS RÉCEN LA REPRÉSENTATION DU COUPLE DANS QUELQUES ROMANS QUÉBÉCOIS RÉCENTS

    Directory of Open Access Journals (Sweden)

    Irène Oore

    2012-10-01

    Full Text Available Nous avons entrepris d’examiner le couple dans une dizaine de romans écrits durant une décennie (entre 1993 et 2003.Nous avons entrepris d’examiner le couple dans une dizaine de romans écrits durant une décennie (entre 1993 et 2003.

  17. Purification, crystallization and preliminary crystallographic characterization of the α2,6-sialyltransferase from Photobacterium sp. JT-ISH-224

    International Nuclear Information System (INIS)

    Okino, Nozomu; Kakuta, Yoshimitsu; Kajiwara, Hitomi; Ichikawa, Masako; Takakura, Yoshimitsu; Ito, Makoto; Yamamoto, Takeshi

    2007-01-01

    Crystallization of the α2,6-sialyltransferase from Photobacterium. Sialyltransferases transfer sialic acid from cytidine-5-monophospho-N-acetylneuraminic acid (CMP-NeuAc) to the nonreducing termini of the oligosaccharyl structures of various glycoproteins and glycolipids. The newly cloned α2,6-sialyltransferase from Photobacterium sp. JT-ISH-224 (from the Vibrionaceae family) is composed of two domains: an unknown N-terminal domain and a catalytic C-terminal domain which shares significant homology with the Pasteurella multocida multifunctional sialyltransferase. The putative mature form of JT-ISH-224 α2,6-sialyltransferase was overproduced in Escherichia coli, purified and crystallized using the hanging-drop vapour-diffusion method at 293 K. The crystal belonged to space group P3 1 21 or P3 2 21, with unit-cell parameters a = b = 90.29, c = 204.33 Å. X-ray diffraction data were collected to 2.5 Å resolution

  18. Qualification and preparatory activities for the manufacturing of 9 TF coils of the JT-60SA magnet

    International Nuclear Information System (INIS)

    Cucchiaro, Antonio; Polli, Gian Mario; Cocilovo, Valter; Drago, Giovanni; Cuneo, Stefano; Terzi, Franco; Peyrot, Marc; Phillips, Guy; Tomarchio, Valerio

    2013-01-01

    In the framework of the Broader Approach Agreement for the construction of the JT-60SA tokamak, ENEA is in charge to provide 9 of the 18 Toroidal Field (TF) coils. The 9 coils are being manufactured by ASG superconductors in Genoa under the supervision of ENEA in collaboration with the JT-60SA European home team. Prior the manufacturing, a preparatory activity has been carried out aimed at designing, constructing and setting-up the relevant components to be realized. In order to get confidence of some special manufacturing process, several qualification activities have been performed. In this paper an overview of the principal milestones reached during the preparatory phase and a description of the qualification activities with relevant test results are presented

  19. Improvement of voltage holding capability in the 500 keV negative ion source for JT-60SA.

    Science.gov (United States)

    Tanaka, Y; Hanada, M; Kojima, A; Akino, N; Shimizu, T; Ohshima, K; Inoue, T; Watanabe, K; Taniguchi, M; Kashiwagi, M; Umeda, N; Tobari, H; Grisham, L R

    2010-02-01

    Voltage holding capability of JT-60 negative ion source that has a large electrostatic negative ion accelerator with 45 cm x 1.1 m acceleration grids was experimentally examined and improved to realize 500 keV, 22 A, and 100 s D- ion beams for JT-60 Super Advanced. The gap lengths in the acceleration stages were extended to reduce electric fields in a gap between the large grids and at the corner of the support flanges from the original 4-5 to 3-4 kV/mm. As a result, the voltage holding capability without beam acceleration has been successfully improved from 400 to 500 kV. The pulse duration to hold 500 kV reached 40 s of the power supply limitation.

  20. The H-mode pedestal, ELMs and TF ripple effects in JT-60U/JET dimensionless identity experiments

    International Nuclear Information System (INIS)

    Saibene, G.; Oyama, N.; Loennroth, J.; Andrew, Y.; Luna, E. de la; Giroud, C.; Huysmans, G.T.A.; Kamada, Y.; Kempenaars, M.A.H.; Loarte, A.; Donald, D. Mc; Nave, M.M.F.; Meiggs, A.; Parail, V.; Sartori, R.; Sharapov, S.; Stober, J.; Suzuki, T.; Takechi, M.; Toi, K.; Urano, H.

    2007-01-01

    This paper summarizes results of dimensionless identity experiments in JT-60U and JET, aimed at the comparison of the H-mode pedestal and ELM behaviour in the two devices. Given their similar size, dimensionless matched plasmas are also similar in their dimensional parameters (in particular, the plasma minor radius a is the same in JET and JT-60U). Power and density scans were carried out at two values of I p , providing a q scan (q 95 = 3.1 and 5.1) with fixed (and matched) toroidal field. Contrary to initial expectations, a dimensionless match between the two devices was quite difficult to achieve. In general, p ped in JT-60U is lower than in JET and, at low q, the pedestal pressure of JT-60U with a Type I ELMy edge is matched in JET only in the Type III ELM regime. At q 95 = 5.1, a dimensionless match in ρ*, ν* and β p,ped is obtained with Type I ELMs, but only with low power JET H-modes. These results motivated a closer investigation of experimental conditions in the two devices, to identify possible 'hidden' physics that prevents obtaining a good match of pedestal values over a large range of plasmas parameters. Ripple-induced ion losses of the medium bore plasma used in JT-60U for the similarity experiments are identified as the main difference with JET. The magnitude of the JT-60U ripple losses is sufficient to induce counter-toroidal rotation in co-injected plasma. The influence of ripple losses was demonstrated at q 95 = 5.1: reducing ripple losses by ∼2 (from 4.3 to 1.9 MW) by replacing positive with negative neutral beam injection at approximately constant P in resulted in an increased p ped in JT-60U, providing a good match to full power JET H-modes. At the same time, the counter-toroidal rotation decreased. Physics mechanisms relating ripple losses to pedestal performance are not yet identified, and the possible role of velocity shear in the pedestal stability, as well as the possible influence of ripple on thermal ion transport are briefly

  1. Energy deposition in the window of the TOTEM Roman pot for the nominal TOTEM run

    CERN Document Server

    Dimovasili, E

    2005-01-01

    The TOTEM Roman Pot needs to be protected from possible accidents. One of the most serious accident scenarios is the beam loss during an asynchronous abort dump. In this case of dump failure it is possible that a deflected bunch hits the Roman Pot, causing severe damage to its thin window. This technical note discusses the results of FLUKA Monte Carlo studies that have been performed in order to calculate the energy deposition and the temperature increase in the thin window due to the nominal LHC bunch.

  2. A multi-technique approach for the characterization of Roman mural paintings

    Energy Technology Data Exchange (ETDEWEB)

    Toschi, Francesco [CNR-IMIP (Istituto di Metodologie Inorganiche e dei Plasmi), Area della Ricerca Roma 1, Via Salaria Km. 29,300, 00016 Monterotondo, Roma, (Italy); Paladini, Alessandra, E-mail: alessandra.paladini@cnr.it [CNR-IMIP (Istituto di Metodologie Inorganiche e dei Plasmi), Area della Ricerca Roma 1, Via Salaria Km. 29,300, 00016 Monterotondo, Roma, (Italy); Colosi, Francesca [CNR-ITABC (Istituto per le Tecnologie Applicate ai Beni Culturali), Area della Ricerca Roma 1, Via Salaria Km. 29,300, 00016 Monterotondo, Roma (Italy); Cafarelli, Patrizia; Valentini, Veronica [CNR-IMIP (Istituto di Metodologie Inorganiche e dei Plasmi), Area della Ricerca Roma 1, Via Salaria Km. 29,300, 00016 Monterotondo, Roma, (Italy); Falconieri, Mauro; Gagliardi, Serena [ENEA, C.R. Casaccia, via Anguillarese 301, 00060 Roma (Italy); Santoro, Paola [CNR-ISMA (Istituto di Studi sul Mediterraneo Antico), Area della Ricerca Roma 1, Via Salaria Km. 29,300, 00016 Monterotondo, Roma (Italy)

    2013-11-01

    In the frame of an ongoing archeological study on the Sabina area, a countryside close to Rome, white and red samples of roman wall paintings have been investigated by combining X-ray diffraction and different spectroscopic methodologies, namely laser induced breakdown spectroscopy, μ-Raman and Fourier transform infrared attenuated total reflectance spectroscopy. The used multi-technique approach has allowed the unambiguous identification of the red pigment as red ochre and has provided insight on the provenance of both the pigment and the material used for the realization of the wall paintings. The experimental results have confirmed some assumptions on the use of local materials in roman rural architecture.

  3. Preliminary remarks on the Roman military equipment from the war booty sacrifice of Viemose, Denmark

    DEFF Research Database (Denmark)

    Pauli Jensen, Xenia

    2007-01-01

    The article deals with the war booty sacrifice of Vimose, Denmark, where a vast amount of Roman military equipment was found. The Ring Pommel swords are discussed, especially the possible (or not so possible) link with the Marcomannic Wars 166-180 AD.......The article deals with the war booty sacrifice of Vimose, Denmark, where a vast amount of Roman military equipment was found. The Ring Pommel swords are discussed, especially the possible (or not so possible) link with the Marcomannic Wars 166-180 AD....

  4. Roman Ways: The Endurance of Patterns in Travel and Hospitality from Antiquit

    Directory of Open Access Journals (Sweden)

    Bradford T. Hudson, Ph.D.

    2014-04-01

    Full Text Available Although it seems clear that multi-unit hotel and restaurant brands proliferated in the United States during the twentieth century, historical research demonstrates that the phenomenon is actually much older. The origins of hospitality chains can be traced back to the Roman Empire. Organizational systems and travel behaviors have remained remarkably similar throughout Western civilization during the past two millennia. The Roman relay station, the medieval post house, the New England inn, the railroad restaurant, and the highway hotel all share a common heritage.

  5. El pensamiento cinematográfico de Roman Jakobson

    Directory of Open Access Journals (Sweden)

    Puyal, Alfonso

    2011-04-01

    Full Text Available The article turns on the film theory outlined by the Russian linguist from three contributions: the essay “Is the Film in Decline?” (1933; the interview on cinema realized in 1967; and some comments disseminated in its writings. The hypothesis that raises Roman Jakobson is the transposition of the literary features to the cinematographic mean, until rising what the Russian formalists came in calling “Poetics of Cinema” (Poetika Kino. In this sense, the most revealing contribution is the study of the metonimic and metaphorical functions that the cinema unfolds from the segmentation and the assemblage. A panoramic one by the relations that maintained Jakobson with the poets and painters of the Czech and Russian avant-garde, their culture in film matter (movies, filmmakers, or the theoretical references that handled in film questions are some of the themes undertaken with the aim to contextualize the vision that Jakobson had of cinematographic medium. The thickness of the article will be centered in its article of 1933 on movies, writing as a result of the consequences of the sound in the film language, as well as of a small experience in the making of the movies during its stay in the Czech Republic.

    El artículo versa sobre la teoría cinematográfica esbozada por el lingüista ruso a partir de tres aportaciones: el ensayo “¿Decadencia del cine?” (1933; la entrevista sobre cine realizada en 1967; y algunos comentarios diseminados en sus escritos. La hipótesis que plantea Jakobson es la transposición de los recursos literarios al medio cinematográfico, hasta levantar lo que los formalistas denominaron “poética del cine” (Poetika kino. En este sentido, la aportación más reveladora es el estudio de las funciones metonímicas y metafóricas que el cine despliega a partir de la planificación y el montaje. Una panorámica por las relaciones que mantuvo Jakobson con los poetas y pintores de la vanguardia rusa

  6. Religion and abortion: Roman Catholicism lost in the pelvic zone.

    Science.gov (United States)

    Kissling, F

    1993-01-01

    The Roman Catholic Church has held the most absolute and extreme position against abortion taken by any religious group. Opposition to abortion by US Catholic bishops has been unflagging since Roe vs. Wade was decided. The current strategy embraced by the bishops is to restrict access to abortion as a prelude to attaining a complete ban on the procedure. The bishops, of course, have a political and constitutional right to champion public policy issues. This ability is limited only by the laws regarding tax-exempt status which make it impossible for the bishops to endorse political candidates. Opponents of the positions of the bishops, in turn, have a right to challenge their positions. The bishops, acting jointly as the United States Catholic Conference (USCC), express their own opinions, not the opinions of the 53 million US Catholics and have been criticized by both conservative and progressive groups in the church. Since women can not become Catholic bishops, or even priests, they are excluded from meetings of the USCC. Catholic lay groups have expressed the view that there is more than one legitimate Catholic position regarding abortion and have even filed briefs in favor of retaining the decision reached in Roe vs. Wade. The bishops, however, are able to draw on a multitude of institutions to further their view and have enhanced the operations of their 28 statewide lobbying offices as the abortion battle has shifted to the states. The Webster decision signaled a return of the bishops to a prominent position in the anti-abortion campaign. Prior to Webster, they kept their distance from the Protestant religious right. With Webster, the bishops felt the time was right to press hard to further restrictions to access to abortion. As they began to apply pressure, a pro-choice backlash developed, with leading Catholic politicians adopting strong pro-choice positions. The bishops reacted by taking such aggressive actions as denouncing certain politicians by name. This

  7. Some remarks on the transitional phase between Early Roman and Late Roman Periods in the region north of the Middle Danube

    Czech Academy of Sciences Publication Activity Database

    Tejral, Jaroslav

    2015-01-01

    Roč. 56, č. 2 (2015), s. 43-101 ISSN 1211-7250 Institutional support: RVO:68081758 Keywords : Early and Late Roman Period * transitional phase * Marcomanic Wars and their aftermath * ethnical and social backround of the B2/C1 phase Subject RIV: AC - Archeology, Anthropology, Ethnology http://prehled-vyzkumu.arub.avcr.cz/miranda2/export/sitesavcr/arub-prehled-vyzkumu/prehled-cisel-a-clanku/prehled-vydanych-cisel/files/PV56_2_Studie2_Tejral.pdf

  8. Study of particle pumping characteristics for different pumping geometries in JT-60U and DIII-D divertors

    International Nuclear Information System (INIS)

    Takenaga, H.; Sakasai, A.; Kubo, H.

    2001-01-01

    Particle pumping characteristics were compared between pumping from the inner side private flux region (IPP) and pumping from both sides of the private flux region (BPP) in the JT-60U W shaped divertor, and between JT-60U IPP and pumping in the DIII-D lower baffled divertor. The pumping flux for BPP is smaller than that for IPP by about a factor of 2 with weak in-out asymmetry of recycling neutral flux and by a factor of 3.5-6.5 with strong in-out asymmetry. The reduction of the pumping flux for BPP is consistent with Monte Carlo simulations, where backflow at the outer pumping slot is observed due to in-out recycling asymmetry. The pumping flux in DIII-D at I p =0.8 MA and B T =1.6 T is comparable to or smaller than that for JT-60U IPP at I p =1.0 MA, B T =3.8 T and I p =1.5 MA, B T =3.5 T in the same density regime. In the DIII-D divertor with pumping from the private flux region, the pumping flux decreases with increasing in-out asymmetry. The pumping flux normalized by the integrated D α emission over the whole plasma exhibits a similar dependence on the distance between the pumping slot and the strike point in JT-60U IPP and the DIII-D lower divertor with pumping through the outer divertor plasma region. (author)

  9. On the origin of patterning in movable Latin type : Renaissance standardisation, systematisation, and unitisation of textura and roman type

    NARCIS (Netherlands)

    Blokland, F.E.

    2016-01-01

    This PhD-research is conducted to test the hypothesis that Gutenberg and consorts developed a standardised and even unitised system for the production of textura type, and that this system was extrapolated for the production of roman type in Renaissance Italy. For roman type, Humanistic handwriting

  10. Moses/Musaeus/Mochos and his God Yahweh, Iao, and Sabaoth, seen from a Graeco-Roman perspective

    NARCIS (Netherlands)

    van Kooten, G.H.; Kooten, G.H. van

    2006-01-01

    George H. van Kooten, “Moses/Musaeus/Mochos and His God Yahweh, Iao, and Sabaoth, Seen from a Graeco-Roman Perspective,” in The Revelation of the Name YHWH to Moses: Perspectives from Judaism, the Pagan Graeco-Roman World, and Early Christianity (ed. George H. van Kooten; Themes in Biblical

  11. The Wisdom of Youth: How Modern Ontario Roman Catholic Students Challenge and Resist the Persistent Colonial Agenda

    Science.gov (United States)

    Brennan, Terri-Lynn Kay

    2012-01-01

    Youth today in Roman Catholic schools are not experiencing the complete freedom of an identity that is unique and valued. They describe the Ontario Roman Catholic school system as if it is still an agent of colonial forces, maintaining imperial power through denominational religious elitism. Using a critical ethnographic methodology within a…

  12. A double-voiced reading of Romans 13:1–7 in light of the imperial cult

    African Journals Online (AJOL)

    Drawing on Mikhail Bakhtin's theory of double-voicedness and James Scott's theory of public and hidden transcripts, this essay investigates the colonial context of Romans 13:1–7 with particular attention to the Roman imperial cult. It is my contention that Paul attempts to persuade the audience to resist the imperial cult, ...

  13. Development of residual thermal stress-relieving structure of CFC monoblock target for JT-60SA divertor

    Energy Technology Data Exchange (ETDEWEB)

    Tsuru, Daigo, E-mail: tsuru.daigo@jaea.go.jp; Sakurai, Shinji; Nakamura, Shigetoshi; Ozaki, Hidetsugu; Seki, Yohji; Yokoyama, Kenji; Suzuki, Satoshi

    2015-10-15

    Highlights: • We carried out numerical simulations on residual thermal stress of targets for the JT-60SA divertor. • We developed three measures to reduce residual thermal stress. • We proposed two structures of CFC monoblock target for the JT-60SA divertor. • We confirmed the effectiveness of the structure by infrared thermography inspection and high heat flux test. - Abstract: Carbon fibre-reinforced carbon composite (CFC) monoblock target for JT-60SA divertor is under development towards the mass-production. CFC monoblocks, WCu interlayers and a CuCrZr cooling tube at the centre of the monoblocks were bonded by vacuum brazing in a high temperature, to a target. If residual thermal stress due to difference of thermal expansions between CFC and CuCrZr exceeds the maximum allowable stress of the CFC after the bonding, cracks are generated in the CFC monoblock and heat removal capacity of the target degrades. In this paper, new structures of the targets were proposed, to reduce residual thermal stress and to mitigate the degradation of heat removal capacity of the targets. Some measures, including slitting of the CFC monoblock aside of the cooling tube, replacement of the interlayer material and shifting the position of the cooling tube, were implemented. The effectiveness of the measures was evaluated by numerical simulations. Target mock-ups with the proposed structures were manufactured. Infrared thermography inspection and high heat flux test were carried out on the mock-ups in order to evaluate the heat removal capacity.

  14. Carbon transport and fuel retention in JT-60U with high temperature operation based on postmortem analysis

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, M., E-mail: yoshida.masafumi@jaea.go.jp [Japan Atomic Energy Agency, Mukoyama 801-1, Naka-shi, Ibaraki-ken 311-0193 (Japan); Tanabe, T.; Adachi, A. [Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, 6-10-1 Hakozaki, Higashi-ku, Fukuoka 812-8581 (Japan); Hayashi, T.; Nakano, T.; Fukumoto, M.; Yagyu, J.; Miyo, Y.; Masaki, K.; Itami, K. [Japan Atomic Energy Agency, Mukoyama 801-1, Naka-shi, Ibaraki-ken 311-0193 (Japan)

    2013-07-15

    Fuel retention rates and carbon re-deposition rates in the plasma shadowed areas, or tile gaps and remote areas, in JT-60U were measured. The total fuel retention rate in the plasma shadowed areas was more than two times higher than that in the carbon re-deposited layers on the plasma facing surfaces, or the divertor tiles. This is because of lower temperature in the plasma shadowed areas than in the plasma facing surfaces, which leads to high hydrogen saturation concentration, although the amount of the carbon re-deposited on the plasma shadowed areas was only 60% of that on the plasma facing surfaces. The total fuel retention rate in JT-60U, including previously determined for all the plasma facing areas, was evaluated to be 1.3 × 10{sup 20} H + D s{sup −1}, and this retention rate was lower than that in the other devices, due probably to high baking temperature operation in JT-60U. Distributions of the fuel retention and the carbon re-deposition in the whole in-vessel of a large tokamak were determined for the first time in the world.

  15. Role of low order rational q values on the ITB-events in JT-60U plasmas

    International Nuclear Information System (INIS)

    Neudatchin, S.V.; Takizuka, T.; Hayashi, N.; Shirai, H.; Fujita, T.; Isayama, A.; Kamada, Y.; Koide, Y.; Suzuki, T.

    2003-01-01

    The formation of internal transport barriers (ITBs) near q=2,3 surfaces in normal (NrS) or optimized shear discharges of JT-60U and JET is well known. In reverse shear (RS) JT-60U plasmas, the role of q minimum (q min ) equal to 3, 5, 3, 2, 5, 2 is not obvious for ITB formation. ITB-events (non-local confinement bifurcations inside and around ITB in a ms timescale) are found in various JT-60U NrS and RS plasmas. Under sufficient power, ITB-events are seen at rational and not rational values of q min . The space-time evolution of T e and T i is similar even being strongly varied in space and time, suggesting same mechanism(s) of T e and T i transport. The temporal formation of strong ITB in H-mode under passing of q min =3 (after periodical improvements and degradations via ITB-events with 8ms period) in RS mode with P nbi =8MW is presented. Under smaller power, ITB-events are observed only at rational values of q min . In a weak RS shot with P nbi =4MW, abrupt rise of T e is seen at q min =3.5, while more cases of T i rise are observed. The difference of the T e and T i evolution seen regularly under the low power, suggests decoupling of T e and T i transport. (author)

  16. Role of low order rational q values in the ITB-events in JT-60U plasmas

    International Nuclear Information System (INIS)

    Neudatchin, S.V.

    2002-01-01

    The formation of internal transport barriers (ITBs) near q=2,3 surfaces in normal (NrS) or optimized shear discharges of JT-60U and JET is well known. In reverse shear (RS) JT-60U plasmas, the role of q minimum (q min ) equal to 3.5, 3, 2.5, 2 is not obvious for ITB evolution. ITB-events (non-local confinement bifurcations inside and around ITB in a ms timescale) are found in various JT-60U NrS and RS plasmas. (a) Under sufficient power, ITB-events are seen at rational and not rational values of q min . The space-time evolution of Te and Ti is similar. The temporal creation of stronger ITB in H-mode (after periodical improvements and degradations via ITB-events with 8 ms period) under passing of q min = 3 is presented (P nbi = 8 MW, 1.5 MA / 3.7 T). (b) Under smaller power, the influence of some rational q min is seen clearly for ITB-events on T e . In 1.3MA/3.7T shot with very weak RS (Pnbi = 4 MW), abrupt rise of T e is seen at q min 3:5, while more cases of T i rise are observed. (c) The possible role of MHD-activity as ITB-events trigger (ms time scale correlation in some NrS and RS cases) is under investigation. (author)

  17. Design study of a new P-NBI control system for 100-s injection in JT-60SA

    International Nuclear Information System (INIS)

    Honda, Atsushi; Okano, Fuminori; Shinozaki, Shinichi; Ooshima, Katsumi; Ikeda, Yoshitaka; Numazawa, Susumu

    2007-03-01

    The modification of the JT-60U to a fully superconducting coil tokamak, JT-60SA (Super Advanced), has been programmed as the satellite devise for the ITER (International Thermonuclear Experimental Reactor) and as the national centralized tokamak. The present positive-ion-based NBI system (P-NBI), which has been operated for 20 years and will be the main heating system on JT-60SA, is required to manage the long pulse injection extended from 30 s to 100 s at the power of 24 MW with 12 units. To realize such a requirement, the original control system handling more than 4000 digital data is to be fully remodeled. Design study of the new control system has been conducted from viewpoint of market availability, system extensibility, cost-effectiveness and independent development in programming. It has been concluded that a distributed control system using PLC (Programmable Logic Controller) could be applied to the large-scale control system for 100-s operations with satisfaction of the evaluation viewpoints. (author)

  18. Carbon transport and fuel retention in JT-60U with high temperature operation based on postmortem analysis

    International Nuclear Information System (INIS)

    Yoshida, M.; Tanabe, T.; Adachi, A.; Hayashi, T.; Nakano, T.; Fukumoto, M.; Yagyu, J.; Miyo, Y.; Masaki, K.; Itami, K.

    2013-01-01

    Fuel retention rates and carbon re-deposition rates in the plasma shadowed areas, or tile gaps and remote areas, in JT-60U were measured. The total fuel retention rate in the plasma shadowed areas was more than two times higher than that in the carbon re-deposited layers on the plasma facing surfaces, or the divertor tiles. This is because of lower temperature in the plasma shadowed areas than in the plasma facing surfaces, which leads to high hydrogen saturation concentration, although the amount of the carbon re-deposited on the plasma shadowed areas was only 60% of that on the plasma facing surfaces. The total fuel retention rate in JT-60U, including previously determined for all the plasma facing areas, was evaluated to be 1.3 × 10 20 H + D s −1 , and this retention rate was lower than that in the other devices, due probably to high baking temperature operation in JT-60U. Distributions of the fuel retention and the carbon re-deposition in the whole in-vessel of a large tokamak were determined for the first time in the world

  19. Validation of special processes for the integration activities of the JT-60SA TF coils manufactured in Italy

    Energy Technology Data Exchange (ETDEWEB)

    Polli, Gian Mario, E-mail: gianmario.polli@enea.it [ENEA, UT-FUS, Via E. Fermi 45, Frascati (Italy); Cucchiaro, Antonio; Cocilovo, Valter [ENEA, UT-FUS, Via E. Fermi 45, Frascati (Italy); Drago, Giovanni; Pesenti, Paolo; Cuneo, Stefano; Terzi, Franco [ASG Superconductors, Corso Perrone 73 r, Genova (Italy); Phillips, Guy; Tomarchio, Valerio [JT-60SA European Home Team, 85748 Garching bei Munchen (Germany)

    2015-10-15

    Highlights: • Insertion. • Casing welding. • Casing embedding. - Abstract: In the framework of the Broader Approach Agreement for the construction of the JT-60SA tokamak, ENEA provides 9 of the 18 toroidal field (TF) coils of the JT-60SA magnet system. The 9 coils are being manufactured by ASG superconductors in Genoa under the supervision of ENEA in collaboration with the JT-60SA European home team. The manufacturing is composed of two main steps: one concerning winding pack assembly and impregnation, and the other devoted to the integration into the casing structure and associated final coil preparation. This paper describes the results of the validation activities set-up for the integration phase. Specifically, welding of casing components has been retained particularly critical for at least three reasons: (i) during welding the WP may be damaged by the intense heating; (ii) distortion caused by heating may determine incorrect coil geometry and then field errors; and (iii) flaws may reduce structural strength and then the overall lifetime of the machine. Similarly, final embedding has been demonstrated on a 1 m long mock-up of the coil. Main results and lessons learned are here described.

  20. Remo cum fratre Quirinus: Metamorphoses of the Roman Foundation Myth from its Beginnings to Horace

    Directory of Open Access Journals (Sweden)

    Špela Tomažinčič

    2008-07-01

    Full Text Available From the first reference to Romulus by Alcimus, a historian from the mid-fourth century BC, where the hero appears alone, down to the age of Augustus, the story of the foundation of Rome underwent considerable plot changes. The two most important are, firstly, Romulus' later role not merely as a conditor urbis, but – in keeping with the Hellenistic tradition of ktiseis poleon – mainly as a creator gentis and a model of the new Roman, who can subsequently embody a new ethnic identity; and, secondly, the later dichotomy of the founders. The interpretation of the Roman foundation myth must be therefore closely associated with the symbolism of numbers – one founder as opposed to twin founders – as it is reflected in different socio-political and historical contexts. In addition to shaping society, myth also documents all its changes. In the context of replacing a single founder with twin founders, Romulus and Remus, the first critical change is the introduction of Remus. The twin founders imply a double community, a notion which becomes meaningful in Rome only after the plebeian achievement of political equality between 367 and 342 BC. The second significant change is the death of Remus, involving the notion of a foundation sacrifice, for which the evidence points to the crisis of 296 BC. The foundation story also serves as an explanation model for the events in the Late Roman Republic. Horace's pessimistic Seventh Epode evokes the foundation crime of fratricide to explain the tragic pattern of civil wars. As Romulus' successors, the Romans are also heirs to his crime, to the scelus fraternae necis, from which they cannot escape. Moreover, Romulus as a creator gentis represents a potential source for the Roman change of identity, which was regarded as coincidental with the foundation act. This recurring theme is elaborated first in Ennius' Annals and later in Vergil's Aeneid and Horace's Third ‘Roman Ode’. The central motif is Ennius

  1. Design of Plasma Facing Components for Superconducting Modification of JT-60

    International Nuclear Information System (INIS)

    Shinji Sakurai; Kei Masaki; Yusuke-Kudo Shibama; Hiroshi Tamai; Makoto Matsukawa; Cordier, J.J.

    2006-01-01

    JT-60 is planning to modify the machine as a fully superconducting coil tokamak (JT-60 Super Advanced, the former JT-60SC and NCT) to establish scientific and technological bases for an economically and environmentally attractive DEMO reactor. It will be also a satellite tokamak in a part of broader approach for ITER. It is designed for high beta (betaN = 3.5-5.5) and steady-state research in a break-even class DD plasma for 100 s or longer. Nominal plasma parameters are I p =5.5 MA, B t =2.7 T, R=3.01 m, a=1.14 m with double-null configuration. An ITER-like single-null configuration with I p =3.5 MA, B t =2.6 T can be also operated. In order to study the ITER-relevant high confinement plasma with high density, designed plasma heating power was enhanced from 25 MW to 41 MW for 100 s through the design review with EU and Japan. The heat flux onto outer divertor target exceeds 10 MW/m 2 with moderate radiative fraction of 50-60% in single-null configuration. Therefore, the ITER-like mono-block CFC target will be adopted to aim at power handling of 15 MW/m 2 . A cooling water system should be reinforced 3 times from original design for double null divertor with high coolant flow velocity of ∼10 m/s. The peak heat flux onto the neutral beam armor for perpendicular injected positive NB is evaluated to be 2 MW/m 2 , which needs to be actively water-cooled. A bolt-fixed CFC tile was tested at the heat flux of 1-3 MW/m 2 and will be applied to the NB armor. In order to improve plasma beta value by enhancing wall stabilization effect, passive-stabilizing plates, which are electrically and mechanically connected in poloidal and toroidal direction, will be installed near the plasma surface (r wall /a=1.1-1.3) at the outboard side. Stabilizing plate has double-wall ribbed structure and can be operated at 573 K with heating nitrogen gas instead of cooling water between double walls. It has crank-type support legs to allow thermal expansion at high temperature operation. The

  2. Overview of JT-60U progress towards steady-state advanced tokamak

    International Nuclear Information System (INIS)

    Ide, S.

    2005-01-01

    Recent experimental results on steady state advanced tokamak (AT) research on JT-60U are presented with emphasis on longer time scale in comparison with characteristics time scales in plasmas. Towards this, modification on control in operation, heating and diagnostics systems have been done. As the results, ∼ 60 s I p flat top and an ∼ 30 s H-mode are obtained. The long pulse modification has opened a door into a new domain for JT-60U. The high normalized beta (β N ) of 2.3 is maintained for 22.3 s and 2.5 for 16.5 s in a high β p H-mode plasma. A standard ELMy H-mode plasma is also extended and change in wall recycling in such a longer time scale has been unveiled. Development and investigation of plasmas relevant to AT operation has been continued in former 15 s discharges as well in which higherNB power (≤ 10 s) is available. Higher β N ∼ 3 is maintained for 6.2 s in high β p H-mode plasmas. High bootstrap current fraction (f BS ) of ∼ 75% is sustained for 7.4 s in an RS plasma. On NTM suppression by localized ECCD, ECRF injection preceding the mode saturation is found to be more effective to suppress the mode with less power compared to the injection after the mode saturated. The domain of the NTM suppression experiments is extended to the high β N regime, and effectiveness of m/n=3/2 mode suppression by ECCD is demonstrated at β N ∼ 2.5-3. Genuine center-solenoid less tokamak plasma start up is demonstrated. In a current hole region, it is shown that no scheme drives a current in any direction. Detailed measurement in both spatial and energy spaces of energetic ions showed dynamic change in the energetic ion profile at collective instabilities. Impact of toroidal plasma rotation on ELM behaviors is clarified in grassy ELM and QH domains. (author)

  3. Review of JT-60U experimental results in 2007 and 2008

    International Nuclear Information System (INIS)

    Isayama, Akihiko; Oyama, Naoyuki; Suzuki, Takahiro; Shinohara, Kouji; Sakamoto, Yoshiteru; Matsunaga, Go; Yoshida, Maiko; Asakura, Nobuyuki; Nakano, Tomohide; Kamiya, Kensaku; Itami, Kiyoshi

    2010-02-01

    Results in JT-60U experiments in 2007 and 2008 are reviewed. In this campaign, which is the final experimental period in JT-60U, development of advanced tokamak plasma was extensively performed toward establishment of physics basis of ITER and DEMO. High integrated performance plasma with high normalized beta (β N -2.6) and high confinement enhancement factor (H H98(y,2) -1.0-1.1), which are comparable to those in the ITER Hybrid Scenario, and at the same time with high bootstrap current fraction (f BS -40%) was sustained for 25 s. High density and high radiation loss fraction plasma was sustained for 12 s by adding argon and neon to a deuterium plasma. The duration of the high-performance plasmas is more than 10 times longer than the current diffusion time, τ R . In a high beta regime exceeding the ideal MHD limit without conducting wall (no-wall limit), a new instability was observed. By suppressing the instability a high beta plasma was sustained for 5 s, which corresponds to several times longer than τ R . Performance of reversed shear plasmas was significantly improved by utilizing the stabilizing effect of the conducting wall, and β N -2.7 and f BS -90% were obtained. These results significantly exceed those in the previous experimental campaign. In addition, real-time control system was improved, and ion temperature and current profile were independently or simultaneously controlled in real time. Development of new diagnostics was also continuously performed. For example, profiles of electron density and current were measured using the lithium beam probe diagnostic with high resolution. A number of important results from physics experiments were obtained in the area of transport, confinement, instability, plasma-wall interaction etc. Performance of heating and current drive systems was also extended significantly. In the electron cyclotron wave system, 2.9 MW for 5 s injection and 0.4 MW for 30 s injection to plasma were successfully demonstrated. Power

  4. Development of remote pipe welding tool for divertor cassettes in JT-60SA

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, Takao, E-mail: hayashi.takao@jaea.go.jp [Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka (Japan); Sakurai, Shinji; Sakasai, Akira; Shibanuma, Kiyoshi [Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka (Japan); Kono, Wataru; Ohnawa, Toshio; Matsukage, Takeshi [Toshiba Corporation, Yokohama, Kanagawa (Japan)

    2015-12-15

    Highlights: • Remote pipe welding tool accessing from inside of the pipe has been newly developed. • Cooling pipe with a jut on the edge expands the acceptable welding gap up to 0.5 mm. • Positioning accuracy of the laser beam is realized to be less than ±0.1 mm. • We have achieved robust welding for an angular misalignment of 0.5°. - Abstract: Remote pipe welding tool accessing from inside of the pipe has been newly developed for JT-60SA. Remote handling (RH) system is necessary for the maintenance and repair of the divertor cassette in JT-60SA. Because the space around the cooling pipe connected with the divertor cassette is very limited, the cooling pipe is to be remotely cut and welded from inside for the maintenance. A laser welding method was employed to perform circumferential welding by rotating the focusing mirror inside the pipe. However, the grooves of connection pipes are not precisely aligned for welding. The most critical issue is therefore to develop a reliable welding tool for pipe connection without a defect such as undercut weld due to a gap caused by angular and axial misalignments of grooves. In addition, an angular misalignment between two pipes due to inclination of pipe has to be taken into account for the positioning of the laser beam during welding. In this paper, the followings are proposed to solve the above issues: (1) Cooling pipe connected with the divertor is machined to have a jut on the edge so as to expand the acceptable welding gap up to 0.5 mm by filling the gap with welded jut. (2) Positioning accuracy of the laser beam for reliable welding is realized to be less than ±0.1 mm along the circumferential target for welding by a position control mechanism provided in the tool even in the case of up to angular misalignment of 0.5° between connection pipes. Based on the above proposals, we have achieved robust welding for a large gap up to 0.5 mm as well as the maximum angular misalignment of 0.5° between connection pipes

  5. Prospective performances in JT-60SA towards the ITER and DEMO relevant plasmas

    International Nuclear Information System (INIS)

    Tamai, H.; Fujita, T.; Kikuchi, M.

    2006-01-01

    JT-60SA, the former JT-60SC and NCT, a superconducting tokamak positioned as the satellite machine of ITER, collaborating with Japan and EU fusion community, aims at contribution to ITER and DEMO through the demonstration of advanced plasma operation scenario and the plasma applicability test with advanced materials. After the discussions in JA-EU Satellite Tokamak Working Group in 2005, the increased heating power, higher heat removal capacity for the plasma facing components, improvement of the radiation shielding, the remote handling system for the maintenance of in-vessel components, and related equipment are planed to be additionally installed. With such full equipment towards the increased heating power of 41 MW (34 MW-NBI and 7 MW-ECH) with 100 s, the prospective plasma performances, analysed by the equilibrium and transport analysis codes, are rather improved in the view point of the contribution to ITER and DEMO relevant research. Accessibility for higher heating power in a higher density region enables the lower normalized Larmor radius and normalized collision frequency close to the reactor relevant plasma with the ITER-similar configuration of single null divertor plasma with the aspect ratio of A = 3.1, elongation of k95 = 1.7, triangularity of d95 (q95) in the plasma current of I p = 3.5 MA, toroidal magnetic field of B T = 2.59 T and the major radius of Rp=3.16 m. The increases in the electron temperature, beam driven and bootstrap current fraction by the increase of the power of Negative ion based NBI (10 MW) reduce the loop voltage and contribute to increase the maximum plasma current of ITER similar shape. Full non-inductive current drive controllability is also extended into the high density and high plasma current operation towards high beta plasma. Flexibility in aspect ratio and shape parameter is kept the same as NCT, i.e. a double null divertor plasma with A = 2.6, k95 = 1.83, d95 = 0.57, I p = 5.5 MA, B T = 2.72 T, and R p = 3.01 m which

  6. Persuasion in Romans 5:12–21 | Snyman | HTS Teologiese Studies ...

    African Journals Online (AJOL)

    It is argued that the pericope, Romans 5:12–21, forms an integral part of Paul's rhetorical strategy, aimed at persuading his audience in Rome to share his views on the contrast between Adam and Christ: Adam's sin brought death into the world, but faith in Christ brings eternal life. In the process of persuasion, Paul uses ...

  7. Suid-Afrikaanse romans in Afrikaans sowel as Engels; soms bloot ...

    African Journals Online (AJOL)

    8 Apr 2016 ... word in sommige van die collages wat elke hoofstuk voorafgaan. Benewens die gesprek met ouer, meer literêre werke, kan Botha se roman ook andersyds beskou word as deel van 'n bepaalde kontemporêre literêre beweging, waar- êre literêre beweging, waar- re literêre beweging, waar- êre beweging ...

  8. The Roman mortars used in the construction of the Ponte di Augusto (Narni, Italy)

    Czech Academy of Sciences Publication Activity Database

    Drdácký, Miloš; Fratini, F.; Frankeová, Dita; Slížková, Zuzana

    2013-01-01

    Roč. 38, č. 1 (2013), s. 1117-1128 ISSN 0950-0618 R&D Projects: GA ČR(CZ) GBP105/12/G059 Institutional support: RVO:68378297 Keywords : historic mortar * roman mortar * Narni bridge Subject RIV: AL - Art, Architecture, Cultural Heritage Impact factor: 2.265, year: 2013

  9. A critical moment: the End of the Roman domain in the Hispanic provinces (409-429)

    OpenAIRE

    Carmen María DIMAS BENEDICTO; Enrique GOZALBES CRAVIOTO

    2013-01-01

    In the present work there are analyzed some aspects of the crisis of the End of the Roman Hispanias, at the same time it makes an approach to the vision that this process could have at that time, from the testimony of some writers.

  10. New radiocarbon data to study the history of roman and medieval Florence

    International Nuclear Information System (INIS)

    Arnoldus-Huyzendveld, A.; Fedi, M.E.; Cantini, F.; Bruttini, J.; Cartocci, A.; Calabrisotto, C. Scire

    2010-01-01

    Florence is a town worldwide known for its Renaissance masterpieces. It is often forgotten that it was founded during Roman times and remained a small village until the end of the early Middle Ages, practically confined within the ancient Roman boundaries. Since 2003, an extended archaeological research executed by the University of Sienna has studied the most ancient layers in the centre of Florence with the aim to enhance both the archaeological and paleo-environmental reconstruction of this area. One of the peculiarities of these excavations is that the early medieval layers were poor in datable ceramics, thus charcoals were sampled from different stratigraphic layers in order to contribute to the dating. Several data have already been published; here we focus on the excavation site of Palazzo Vecchio, now the seat of the municipality of Florence. This area is located close to the Arno river, along the eastern margin of the slightly elevated height upon which the Roman town was founded; actually, in the layers beneath the surface, the Roman theatre is still preserved. Radiocarbon dating of charcoals was performed in the LABEC laboratory in Florence, at the AMS beam line of the AMS-IBA 3 MV Tandetron accelerator. Comparison of these new data with the former ones and with the archaeological and geological data adds new information especially on natural phenomena like floods and on the human occupation of this area in the past.

  11. The island of Skyros from Late Roman to Early Modern times : an archaeological survey

    NARCIS (Netherlands)

    Karambinis, Michalis

    2015-01-01

    Aegean archaeology has mainly concentrated on Prehistoric and Greco-Roman times and has provided relatively little information on human activity and material culture in the medieval period. Historical research concerning the medieval era is sufficiently developed but archaeological research on the

  12. Freud and Gidget go to Rome but uncle Sam doesn't: The roman ...

    African Journals Online (AJOL)

    Questo articolo si propone di prendere in esame alcuni film di Hollywood, da Roman Holiday a Gidget goes to Rome, che furono realizzati a Roma negli anni della guerra fredda. Tematicamente incentrata sulla generale ambivalenza dei concetti di casa, amore e morte, questa serie della 'febbre romana' conserva tutti i tratti ...

  13. Leaders of the Four Hundred in the Works of Cicero and his Roman Contemporaries

    Czech Academy of Sciences Publication Activity Database

    Nývlt, Pavel

    -, č. 2 (2017), s. 29-39 ISSN 0567-8269 Institutional support: RVO:67985955 Keywords : Cicero * Cornelius Nepos * Roman literature * reception of Greek culture in Rome * ancient Greek history * ancient Greek historiography Subject RIV: AB - History OBOR OECD: History ( history of science and technology to be 6.3, history of specific sciences to be under the respective headings)

  14. Romans 1:18-32 amidst the gay-debate: Interpretative options | Punt ...

    African Journals Online (AJOL)

    The prominence of Romans 1:18-32 in the gay-debate is the subject of various and wide-ranging opinions as far as the most adequate interpretation of this passage. This contribution puts the debate about the text into perspective by surveying some recent alternative opinions on its meaning. It is established that two ...

  15. Roman Sikora: Smetení Antigony - Pokus o tragédii (1998)

    Czech Academy of Sciences Publication Activity Database

    Vodička, Libor

    2005-01-01

    Roč. 53, č. 3 (2005), s. 413-422 ISSN 0009-0468 R&D Projects: GA ČR(CZ) GA405/03/1136 Institutional research plan: CEZ:AV0Z9056905 Keywords : theatre * Roman Sikora Subject RIV: AJ - Letters, Mass-media, Audiovision

  16. Les variations diasystématiques et leurs interdépendances dans les langues romanes

    DEFF Research Database (Denmark)

    Le présent volume contient un choix des actes du Colloque DIA II sur la variation linguistique dans les langues romanes. Ce colloque organisé par l'Université de Copenhague en collaboration avec l’Académie Royale des Sciences et Belles-lettres du Danemark du 19 au 21 novembre 2012 était consacré ...

  17. Higher Education's Influence on the Confessional Practices of Roman Catholic Laity in the Greater Miami Area

    Science.gov (United States)

    Ferrari, Joseph L.

    2013-01-01

    This qualitative phenomenological study of 20 Roman Catholic laypersons in the Greater Miami area investigated the phenomenon of transformation of confessional practice as a result of the undergraduate educational experience. By searching for meaning in each individual's story, two themes or factors and six sub themes emerged. The themes were…

  18. "Flee from the Worship of Idols": Becoming Christian in Roman Corinth

    Science.gov (United States)

    Byler, Dorvan

    2016-01-01

    The religious contexts in which early Christian communities grew were important factors in the first-century development of Christianity, affecting what it meant to become a Christian--either as a convert from a background in Judaism or as a convert from a background in Greek, Roman, or Egyptian cults. Surrounding religions and cultural norms…

  19. Some Influences of Greek and Roman Rhetoric on Early Letter Writing.

    Science.gov (United States)

    Hildebrandt, Herbert W.

    1988-01-01

    Describes how letter writing, especially business letters, was influenced by Greek and Roman oral rhetoricians. Discusses three precepts of oral rhetoric--inventio, dispositio, and style--and notes that the classical theories' reflection in written communication can be seen in selected Italian, German, and English epistolographic works. (MM)

  20. The historiography of the Later Roman Empire: from maximal state to minimal state, and back again

    Directory of Open Access Journals (Sweden)

    Uiran Gebara da Silva

    2017-11-01

    Full Text Available The paper analyses the conceptual models of state used by the scholarship of the later Roman Empire. The argument here developed is that it is possible to identify an oscillation between opposing conceptions of state, sometimes maximalist, sometimes minimalist, and that such conceptions have almost always served as an explanatory structure of the later Roman Empire historical developments, with the greater or smaller size of that State seen alternately as the cause for either the disarticulation or maintenance of the Roman system in the Mediterranean. The paper presents an historical review of those conceptions, elaborates on their connections with the debate between modernism and primitivism in the ancient economy and deals with their structuring ideological assumptions and the almost ubiquitous presence of liberal ideological categories and assumptions (even among Marxist authors. The paper concludes by reflecting on how this historiographical opposition between minimalist and maximalist conceptions obscures our understanding of the class relations of the later Roman imperial system of government.