77 FR 75831 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2012-12-26

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... certain serial numbers (S/Ns) of Rolls-Royce plc (RR) RB211-Trent 768-60, 772- 60, and 772B-60 turbofan... use any of the RB211-Trent 768-60, 772-60, and 772B-60 turbofan engines listed by S/N in this AD...

76 FR 20229 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-Trent 768-60 and Trent 772-60 Turbofan Engines

Science.gov (United States)

2011-04-12

... inspections of the MCD. We are issuing this AD to prevent in-flight engine shutdowns caused by step aside... Airworthiness Directives; Rolls-Royce plc (RR) RB211-Trent 768-60 and Trent 772-60 Turbofan Engines AGENCY... superseding an existing airworthiness directive (AD) for RR RB211-Trent 700 series turbofan engines. That AD...

75 FR 27964 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-22B and RB211-524 Series Turbofan Engines

Science.gov (United States)

2010-05-19

...-1157; Directorate Identifier 2009-NE-26-AD] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc (RR... p.m., Monday through Friday, except Federal holidays. Fax: (202) 493-2251. Contact Rolls-Royce plc... received by the closing date and may amend this proposed AD based on those comments. We will post all...

75 FR 63727 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-524 Series Turbofan Engines

Science.gov (United States)

2010-10-18

...-0162; Directorate Identifier 2004-NE-19-AD] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc (RR...-2251. Contact Rolls-Royce plc, P.O. Box 31, Derby, DE24 8BJ, United Kingdom; telephone: 011-44-1332... would cost $0. Based on these figures, we estimate the total cost of the AD to U.S. operators would be...

78 FR 61168 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-10-03

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... (RR) RB211-535E4-37, RB211-535E4-B-37, RB211-535E4-C- 37, and RB211-535E4-B-75 turbofan engines. This...-37, RB211-535E4-B-37, RB211-535E4-C-37, and RB211-535E4-B-75 turbofan engines. (d) Unsafe Condition...

75 FR 801 - Airworthiness Directives; Rolls-Royce plc RB211-Trent 500, 700, and 800 Series Turbofan Engines

Science.gov (United States)

2010-01-06

...The FAA proposes to supersede an existing airworthiness directive (AD) for Rolls-Royce plc RB211-Trent 800 series turbofan engines. That AD currently requires replacing the fuel-to-oil heat exchanger (FOHE). This proposed AD would require replacing the FOHE on the RB211-Trent 500 and RB211-Trent 700 series turbofan engines in addition to the RB211-Trent 800 series turbofan engines. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product, and results from the risk of engine FOHE blockage. The MCAI describes the unsafe condition as:

75 FR 33738 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-524 Series and RB211 Trent 500, 700, and 800...

Science.gov (United States)

2010-06-15

...-0562; Directorate Identifier 2009-NE-29-AD] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc (RR...-2251. Contact Rolls-Royce plc, P.O. Box 31, Derby, DE24 8BJ, United Kingdom; phone: 011 44 1332 242424... amend this proposed AD based on those comments. We will post all comments we receive, without change, to...

75 FR 58290 - Airworthiness Directives; Rolls-Royce plc RB211 Trent 700 and Trent 800 Series Turbofan Engines

Science.gov (United States)

2010-09-24

... Airworthiness Directives; Rolls-Royce plc RB211 Trent 700 and Trent 800 Series Turbofan Engines AGENCY: Federal... or increase the scope of the AD. Costs of Compliance Based on the service information, we estimate.... Required parts would cost about $15,000 per product. Based on these figures, we estimate the cost of the AD...

78 FR 6206 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-01-30

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT..., RB211-Trent 977-84, RB211-Trent 977B-84 and RB211-Trent 980-84 turbofan engines. This AD requires on...

77 FR 73268 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2012-12-10

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... certain Rolls-Royce plc (RR) RB211-Trent 900 series turbofan engines. This AD requires inspection of the... turbofan engines, all serial numbers. (d) Reason This AD was prompted by a Trent 900 engine experiencing a...

77 FR 56760 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2012-09-14

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... all Rolls-Royce plc (RR) RB211-Trent 800 series turbofan engines. This AD requires removing from...-17, 892-17, 892B-17, and 895-17 turbofan engines that have an intermediate pressure (IP) turbine disc...

77 FR 32007 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2012-05-31

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... all Rolls-Royce plc (RR) RB211-Trent 800 series turbofan engines. This AD requires removal from...-17, 877- 17, 884-17, 884B-17, 892-17, 892B-17, and 895-17 turbofan engines. (d) Reason This AD was...

78 FR 6749 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-01-31

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... (AD) for all Rolls-Royce plc (RR) models RB211 Trent 768-60, 772-60, and 772B-60 turbofan engines... 772B-60 turbofan engines. (d) Reason This AD was prompted by low-pressure (LP) compressor blade partial...

78 FR 5 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-01-02

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT...-535E4-C-37 turbofan engines. This AD was prompted by an investigation by RR concluding that certain...- 535E4-B-37; RB211-535E4-B-75; and RB211-535E4-C-37 turbofan engines with intermediate-pressure (IP...

78 FR 20509 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-04-05

... Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking...) RB211-535E4-B-37 series turbofan engines. This proposed AD was prompted by recalculating the life of.... (c) Applicability This AD applies to Rolls-Royce plc (RR) RB211-535E4-B-37 series turbofan engines...

77 FR 20508 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2012-04-05

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT...-Trent 884B-17, RB211-Trent 892-17, RB211- Trent 892B-17, and RB211-Trent 895-17 turbofan engines. That...-17, RB211- Trent 892B-17, and RB211-Trent 895-17 turbofan engines. On September 9, 2011, we also...

77 FR 58762 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2012-09-24

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT...-Trent 892-17, RB211- Trent 892B-17, and RB211-Trent 895-17 turbofan engines. That AD currently requires...-17, RB211-Trent 892B-17, and RB211-Trent 895-17 turbofan engines. (d) Unsafe Condition This AD was...

78 FR 22180 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-04-15

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... 972B-84, RB211-Trent 977-84, RB211-Trent 977B-84, and RB211-Trent 980-84 turbofan engines. This AD... 977B-84, and RB211-Trent 980-84 turbofan engines that incorporate RR production Modification 72-G585 or...

77 FR 20987 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2012-04-09

... Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... the Federal Register. That AD applies to RB211-Trent 800 series turbofan engines. The last comment...

78 FR 37703 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-06-24

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... (RR) model RB211 Trent 768-60, 772-60, and 772B-60 turbofan engines. This AD was prompted by low...) model RB211 Trent 768-60, 772-60, and 772B-60 turbofan engines. (d) Reason This AD was prompted by low...

75 FR 264 - Airworthiness Directives; Rolls-Royce plc RB211-Trent 800 Series Turbofan Engines

Science.gov (United States)

2010-01-05

...-1004; Directorate Identifier 2009-NE-36-AD] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc.... Contact Rolls-Royce plc, P.O. Box 31, Derby, England; telephone: 011-44-1332-249428; fax: 011-44-1332... AD. We will consider all comments received by the closing date and may amend this proposed AD based...

75 FR 45560 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-Trent 800 Series Turbofan Engines

Science.gov (United States)

2010-08-03

...-0755; Directorate Identifier 2010-NE-12-AD] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc (RR... based on engine thrust rating but now based on operating shaft speeds) introduced by Rolls- Royce. The...-Royce plc, P.O. Box 31, Derby, DE24 8BJ, United Kingdom: Telephone 44 (0) 1332 242424; fax 44 (0) 1332...

76 FR 65997 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-535 Series Turbofan Engines

Science.gov (United States)

2011-10-25

...-0994; Directorate Identifier 2009-NE-39-AD] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc (RR... Friday, except Federal holidays. For service information identified in this AD, contact Rolls-Royce plc.... Based on these figures, we estimate the cost of this proposed AD on U.S. operators to be $1,499,400. FAA...

78 FR 70487 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-11-26

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... turbofan engines. This AD requires removal of certain high-pressure (HP) and intermediate-pressure (IP..., RB211 Trent 768-60, 772-60, and 772B-60 turbofan engines with turbine disc part numbers (P/Ns) and...

78 FR 61171 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-10-03

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... (RR) RB211-535E4-B-37 series turbofan engines. This AD requires removal of affected parts using a...-B-37 series turbofan engines. (d) Unsafe Condition This AD was prompted by recalculating the lives...

77 FR 39157 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2012-07-02

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT...-84, and 980-84 turbofan engines. That AD currently requires inspecting the intermediate-pressure (IP... RR model RB211-Trent 970-84, 970B-84, 972-84, 972B-84, 977-84, 977B-84, and 980-84 turbofan engines...

76 FR 68663 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-Trent 800 Series Turbofan Engines

Science.gov (United States)

2011-11-07

...-0755; Directorate Identifier 2010-NE-12-AD] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc (RR... Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby, England, DE248BJ; phone: 011-44-1332... date and may amend this proposed AD based on those comments. We will post all comments we receive...

76 FR 72650 - Airworthiness Directives; Rolls-Royce plc (RR) RB211 Trent 800 Series Turbofan Engines

Science.gov (United States)

2011-11-25

...-0959; Directorate Identifier 2011-NE-25-AD] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc (RR... holidays. Fax: (202) 493-2251. Contact Rolls-Royce plc, P.O. Box 31, Derby, DE24 8BJ, United Kingdom; phone... AD. We will consider all comments received by the closing date and may amend this proposed AD based...

75 FR 61361 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-535 Series Turbofan Engines

Science.gov (United States)

2010-10-05

...-0994; Directorate Identifier 2009-NE-39-AD] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc (RR...-Royce plc., P.O. Box 31, Derby, DE24 8BJ, United Kingdom; Telephone: 011 44 1332 242424, Fax: 011 44... based on those comments. We will post all comments we receive, without change, to http://www.regulations...

75 FR 15326 - Airworthiness Directives; Rolls-Royce plc RB211-Trent 500, 700, and 800 Series Turbofan Engines

Science.gov (United States)

2010-03-29

... ambient conditions, ice can accumulate on the walls of the fuel pipes within the aircraft fuel system... aircraft in combination with Rolls-Royce engines that feature similar fuel systems to the RB211-Trent 800... the aircraft fuel system, which can then be released downstream when fuel flow demand is increased...

78 FR 54149 - Airworthiness Directives; Rolls-Royce plc (RR) Turbofan Engines

Science.gov (United States)

2013-09-03

... Airworthiness Directives; Rolls-Royce plc (RR) Turbofan Engines AGENCY: Federal Aviation Administration (FAA... service information identified in this AD, contact Rolls-Royce plc, Corporate Communications, P.O. Box 31... per hour. Replacement parts are estimated to cost about $2,271 per engine. Based on these figures, we...

76 FR 65136 - Airworthiness Directives; Rolls-Royce plc (RR) Turbofan Engines

Science.gov (United States)

2011-10-20

... Airworthiness Directives; Rolls-Royce plc (RR) Turbofan Engines AGENCY: Federal Aviation Administration (FAA... information identified in this AD, contact Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby... 8, 2011, to perform the inspection. Costs of Compliance Based on the service information, we...

78 FR 70489 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-11-26

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT..., and 560A2-61 turbofan engines. This AD requires replacement or repair of the low-pressure (LP...-61, 556B2-61, 560-61, and 560A2-61 turbofan engines. (d) Reason This AD was prompted by reports of...

78 FR 5126 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-01-24

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... turbofan engines. This AD requires replacement of the fuel oil heat exchanger (FOHE). This AD was prompted...-84 turbofan engines with a fuel oil heat exchanger (FOHE), part number 47111-1241, installed. (d...

78 FR 68360 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-11-14

... Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... turbofan engines. The AD number is incorrect in the Regulatory text. This document corrects that error. In... turbofan engines. As published, the AD number 2013-19-17 under Sec. 39.13 [Amended], is incorrect. No other...

78 FR 20505 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-04-05

... Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking...; - 535E4-37; -535E4-B-37, and -535E4-B-75 turbofan engines, and all RB211- 524G2-19; -524G3-19; -524H2-19; and -524H-36 turbofan engines. This proposed AD was prompted by the discovery of a cracked and...

76 FR 52288 - Airworthiness Directives; Rolls-Royce plc (RR) Trent 800 Series Turbofan Engines

Science.gov (United States)

2011-08-22

...-0836; Directorate Identifier 2010-NE-38-AD] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc (RR... plc, P.O. Box 31, Derby, DE24 8BJ, United Kingdom: telephone 44 (0) 1332 242424; fax 44 (0) 1332... based on those comments. We will post all comments we receive, without change, to http://www.regulations...

78 FR 20507 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-04-05

... Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking...) RB211-535E4-37, RB211-535E4-B-37, RB211-535E4-C- 37, and RB211-535E4-B-75 turbofan engines. This...-535E4-C-37, and RB211-535E4-B-75 turbofan engines. (d) Reason This AD was prompted by RR updating the...

78 FR 12255 - Airworthiness Directives; Rolls-Royce (1971) Limited, Bristol Engine Division Turbojet Engines

Science.gov (United States)

2013-02-22

...: (202) 493-2251. For service information identified in this AD, contact Rolls-Royce plc, Corporate... received by the closing date and may amend this proposed AD based on those comments. We will post all... this AD, contact Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby, England, DE248BJ; phone...

77 FR 16917 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

Science.gov (United States)

2012-03-23

... heat treated after application of silver plating. We are issuing this AD to prevent failure of the HP... treatment after application of silver plating. This condition, if not corrected, could result in a stage 2... directive (AD): 2012-06-17 Rolls-Royce Deutschland Ltd & Co KG (Formerly Rolls-Royce plc, Derby, England...

77 FR 40820 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2012-07-11

... Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking... turbofan engines. This proposed AD was prompted by an investigation by RR concluding that certain...; RB211-535E4-B-75; and RB211-535E4-C-37 turbofan engines. (d) Reason This AD was prompted by an...

77 FR 26216 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2012-05-03

... Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking..., RB211- Trent 892-17, RB211-Trent 892B-17, and RB211-Trent 895-17 turbofan engines. The existing AD...-Trent 895-17 turbofan engines. That AD requires initial and repetitive UIs of certain LP compressor...

75 FR 61343 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (RRD) Models Tay 620-15, Tay 650-15...

Science.gov (United States)

2010-10-05

... adopting the AD as proposed. Costs of Compliance Based on the service information, we estimate that this AD... cost about $100,000 per product. Based on these figures, we estimate the cost of the AD on U.S... Rolls-Royce Deutschland Ltd & Co KG (Formerly Rolls-Royce plc): Amendment 39-16457. Docket No. FAA-2010...

77 FR 2932 - Airworthiness Directives; Rolls-Royce plc (RR) Turbofan Engines

Science.gov (United States)

2012-01-20

...-pressure (IP) compressor rotor shaft rear balance land for cracks, which could lead to engine failure. This...; fax: 011-44-1332-245418 or email from http://www.rolls-royce.com/contact/civil_team.jsp . You may..., 12 New England Executive Park, Burlington, MA; phone: (781) 238-7143; fax: (781) 238-7199; email...

76 FR 40217 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-524 Series Turbofan Engines

Science.gov (United States)

2011-07-08

...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0... by August 8, 2011. The Director of the Federal Register approved the incorporation by reference of a... regulatory, economic, environmental, and energy aspects of this AD. We will consider all comments received by...

78 FR 59291 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co. KG Turbofan Engines

Science.gov (United States)

2013-09-26

... received by the closing date and may amend this proposed AD based on those comments. We will post all.... Based on these figures, we estimate the cost of the proposed AD on U.S. operators to be $598,520... Deutschland GmbH, formerly Rolls-Royce plc): Docket No. FAA-2013- 0342; Directorate Identifier 2013-NE-14-AD...

78 FR 17080 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

Science.gov (United States)

2013-03-20

... Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines AGENCY: Federal Aviation... certain Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700-710 series turbofan engines. This AD requires... applies to Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700-710A1-10 and BR700-710A2-20 turbofan engines...

77 FR 37344 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-06-21

... proposed AD, contact Rolls-Royce plc, P.O. Box 31, Derby, DE24 8BJ, England; telephone 011 44 1332 242424... amend this proposed AD based on those comments. We will post all comments we receive, without change, to... correct the unsafe condition identified in the MCAI. Rolls-Royce plc has issued Alert Service Bulletin RB...

Rolls-Royce digital Rod Control System

International Nuclear Information System (INIS)

Pouillot, M.

2010-01-01

Full text of publication follows: Rolls-Royce has developed a new generation of Rod Control System, based on 40 years of experience. The fifth-generation Rod Control System (RCS) from Rolls-Royce offers a reliable, modular design with adaptability to your preferred platform, for modernization projects or new reactors. Flexible implementation provides the option for you to keep existing cabinets, which permits you to optimize installation approach. Main features for the power part: - Control Rod Drive Mechanism (CRDM) type: 3-coil. - Independent control of each sub-bank. - Each sub-bank is controlled by a cycler unit and 3 identical power racks, each including 4 identical power modules and a common power-supply module. - Coil-per-coil digital control: each power module embeds power-conversion, current-control, and current-monitoring functions for one coil. Control and monitoring are carried out by separate electronics in the module. Current is digitized and fully monitored by means of min-max templates. - A double-hold function is included: a power module assigned to a gripper will activate its coil if a fault risking to cause a reactor trip occurs. - Power modules are standardized, hot-pluggable and self-configured: a power module includes a set of parameters for each type of coil SG, MG, LC. The module recognizes the rack it is plugged in, and chooses automatically parameters to be used. Main benefits: - Reduced operational, maintenance, training, and inventory costs: standardization of power modules and integration of control and monitoring on the same PC-card lead to a drastic reduction of spare part types, and simplification of the system. - Easy maintenance: - Replacement of a power module solves nearly all failures due to current control or monitoring for a coil. It is done instantly thanks to hot-plug capability. - On the front plate of power-modules, LEDs provide useful information for diagnostic: current setpoint from cycler, output current bar

Rolls-Royce I and C long term support a dedicated solution to manage plant condition, optimize operating life and maximize plant value while improving safety

International Nuclear Information System (INIS)

Baillonmartos, F.

2010-01-01

Rolls-Royce supplied safety I and C equipment as Original Equipment Manufacturer (OEM) for 200 reactors in operation from 1970', including various technological steps (analog to digital hardware). The hardware scope covers various systems, either more than 500 hardware references, either more than 150000 parts in operation. Rolls-Royce contributes to life time extension ensuring system availability and reliability on long term basis by determining the optimum solution between different maintenance approaches: maintenance and repair with limited retrofit or major system retrofit. Based on Long Term Support (LTS) agreement with customers, Rolls-Royce commits to maintain the capability to manufacture, modify, repair, test, at board, rack and systems level over a long time period. This means finding solution to hardware ageing, technology evolution, skills and tools maintenance. This paper describes how Rolls-Royce has built a global process based on delivering a package of services and developing long term support engineering solutions and tools. Our main experience on EDF partnership will serve to illustrate Rolls-Royce I and C Long Term Support activity. (authors)

A Theoretical and Experimental Analysis of Post-Compression Water Injection in a Rolls-Royce M250 Gas Turbine Engine

Science.gov (United States)

2015-05-18

ROLLS-ROYCE M250 GAS TURBINE ENGINE by Midshipman 1/C Brian R. He United States Naval Academy Annapolis, Maryland...Injection in a Rolls- Royce M250 Gas Turbine Engine 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) He...output, efficiency, operating conditions, and emissions of injecting water at the compressor discharge of a Rolls-Royce M250 . The results

Engineering excellence at Rolls-Royce; a taste of English culture

NARCIS (Netherlands)

Schnelders, J.

2013-01-01

Rolls-Royce is one of the most well-known brands in the world and synonymous with the highest engineering quality. Amongst Aerospace Engineers, Rolls-Royce is directly associated with the Trent turbofan aircraft engines. The engines power the world’s newest passenger aircraft, including the Boeing

Rolls-Royce successful modernization of safety-critical Instrumentation and Control (I and C) equipment at the Dukovany VVER 440/213 Nuclear Power Plant, based on SPINLINE 3 platform

International Nuclear Information System (INIS)

Rebreyend, P.; Burel, J.P.; Spoc, J.; Karasek, A.

2010-01-01

Rolls-Royce has provided on-time delivery of a substantial safety-critical I and C overhaul for four Nuclear reactors operated by Czech Republic utility, CEZ a.s. This nine-year project is considered to be one of the largest I and C modernization projects in the world. The Dukovany VVER 440 I and C modernization project and its key success factors are profiled in this paper. The project is in the final stages with the last unit to be completed in 2009. Beginning in September 2000, the project is in compliance with the initial schedule. Rolls-Royce has been designing and manufacturing I and C solutions dedicated to the implementation of safety and safety-related functions in nuclear power plants (NPPs) for more than 30 years. Though the early solutions were non-software-based, since 1984 software-based solutions for safety I and C functions have been deployed in operating NPPs across France and 15 other countries. The Rolls-Royce platform is suitable for implementation of safety I and C functions in new NPPs, as well as in the modernization of safety equipment in existing plants. CEZ a.s. is a major electricity supplier for the national grid. At Dukovany, CEZ a.s. operates four units of VVER-440/213-type reactors producing one quarter of CEZ a.s. electricity production. The first of these units was connected to the grid in 1985. Since the year 2000, the nine-year modernization program has been underway at Dukovany, at a cost of more than 200 million Euros. The equipment replacement was implemented during regular, planned outages of the original equipment and systems. After an international bidding phase, CEZ a.s. awarded a contract to Skoda JS for general engineering and project management. Individual subcontracts were then signed between Skoda JS and a consortium between Rolls-Royce and Areva for modernization of the safety systems, including the Reactor Protection System (RPS), the Reactor Control System (RCS), and the Post-Accident Monitoring System (PAMS). Two

76 FR 24798 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-Trent 875-17, RB211-Trent 877-17, RB211...

Science.gov (United States)

2011-05-03

... Bulletin SB 72-D672--Introduction of Laser Shock Peening (LSP)) and also a part life upgrade to the... SB 72-D672--Introduction of Laser Shock Peening (LSP)) and also a part life upgrade to the retention...-applying dry film lubricant (DFL) to the fan blades after inspection, either Aircraft Maintenance Manual...

78 FR 17075 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

Science.gov (United States)

2013-03-20

... Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines AGENCY: Federal Aviation... certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Tay 611-8 turbofan engines. This AD requires inspection... (RRD) Tay 611-8 turbofan engines, serial numbers 16245, 16256, 16417, 16418, 16584, 16585, 16639, 16640...

78 FR 35574 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

Science.gov (United States)

2013-06-13

... Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines AGENCY: Federal Aviation... airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) model Tay 650-15 turbofan engines... Compliance We estimate that this proposed AD affects 52 Tay turbofan engines installed on airplanes of U.S...

78 FR 17079 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

Science.gov (United States)

2013-03-20

... Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines AGENCY: Federal Aviation... certain Rolls-Royce Deutschland Ltd & Co KG (RRD) models Tay 620-15 and Tay 650-15 turbofan engines. This... Tay 620-15 and Tay 650-15 turbofan engines with a low-pressure compressor (LPC) rotor disc assembly...

78 FR 28161 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-05-14

... Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking... turbofan engines that have a high-pressure (HP) compressor stage 1 to 4 rotor disc installed, with a..., -524H-T-36, and -524H2-T-19 turbofan engines that have a HP compressor stage 1 to 4 rotor disc installed...

The cost of SMRs. How Rolls Royce aims to compete with wind and solar

Energy Technology Data Exchange (ETDEWEB)

Dalton, David [NucNet The Independent Global Nuclear News Agency, Brussels (Belgium)

2017-12-15

The UK nuclear industry is hoping that claims by Rolls-Royce that small modular reactor (SMR) projects could deliver electricity for a similar cost to offshore wind will provide much-needed impetus to government plans for the country to develop a ''best value'' SMR and put it into commercial operation by the end of the next decade. Rolls-Royce and its consortium partners, including Amec Foster Wheeler, Arup, Laing O'Rourke and Nuvia, say the UK SMR they are developing could produce energy for as low as pound 60 (Euro 66, $ 79) per MWh, which is competitive against wind and solar and significantly lower than the pound 92.50 per MWh agreed by the government and project developer EDF for the new Hinkley Point C nuclear station.

The cost of SMRs. How Rolls Royce aims to compete with wind and solar

International Nuclear Information System (INIS)

Dalton, David

2017-01-01

The UK nuclear industry is hoping that claims by Rolls-Royce that small modular reactor (SMR) projects could deliver electricity for a similar cost to offshore wind will provide much-needed impetus to government plans for the country to develop a ''best value'' SMR and put it into commercial operation by the end of the next decade. Rolls-Royce and its consortium partners, including Amec Foster Wheeler, Arup, Laing O'Rourke and Nuvia, say the UK SMR they are developing could produce energy for as low as pound 60 (Euro 66, $ 79) per MWh, which is competitive against wind and solar and significantly lower than the pound 92.50 per MWh agreed by the government and project developer EDF for the new Hinkley Point C nuclear station.

Rolls-Royce's decision to build manufacturing plant will impact Virginia Tech

OpenAIRE

Nystrom, Lynn A.

2007-01-01

Virginia Tech's College of Engineering will receive three endowed chairs, $2 million in support from the state of Virginia for laboratory renovations, some graduate fellowships, and resources for specific international program efforts, as a result of plans by British-based Rolls-Royce to build a new jet engine manufacturing plant in Prince George County.

75 FR 77904 - In the Matter of Certain Turbomachinery Blades, Engines and Components Thereof; Notice of...

Science.gov (United States)

2010-12-14

... Corporation of Hartford, Connecticut. The complaint alleges violations of section 337 based upon the... which the complaint is to be served: Rolls-Royce Group plc, Registered Office, 65 Buckingham Gate, London SW1E6AT, United Kingdom; Rolls-Royce plc, 65 Buckingham Gate, London SW1E6AT, United Kingdom. (c...

76 FR 78808 - Airworthiness Directives; Teledyne Continental Motors (TCM) and Rolls-Royce Motors Ltd. (R-RM...

Science.gov (United States)

2011-12-20

... Airworthiness Directives; Teledyne Continental Motors (TCM) and Rolls-Royce Motors Ltd. (R-RM) Series... superseding an existing airworthiness directive (AD) for certain TCM and R-RM series reciprocating engines... adds R-RM C-125, C- 145, O-300, IO-360, TSIO-360, and LTSIO-520-AE series reciprocating engines to the...

77 FR 71085 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

Science.gov (United States)

2012-11-29

... Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines AGENCY: Federal Aviation... turbofan engines. This AD requires initial and repetitive general inspections and ultrasonic inspections...

76 FR 30529 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-535 Series Turbofan Engines

Science.gov (United States)

2011-05-26

... Compliance One commenter, American Airlines, asked us to change the Costs of Compliance Section of the... engine shop visit.'' Request To Clarify the Compliance Time One commenter, American Airlines, asked us to... installed engines were on U.S. registered airplanes. We changed the Costs of Compliance Section from ``90...

76 FR 67591 - Airworthiness Directives; Rolls-Royce Corporation Turbofan Engines

Science.gov (United States)

2011-11-02

... Airworthiness Directives; Rolls-Royce Corporation Turbofan Engines AGENCY: Federal Aviation Administration (FAA... 3007A1P, and AE 3007A3 turbofan engines. This AD requires initial and repetitive eddy current inspections... 3007A, AE 3007A1/1, AE 3007A1, AE 3007A1/3, AE 3007A1E, AE 3007A1P, and AE 3007A3 turbofan engines...

76 FR 14797 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-Trent 900 Series Turbofan Engines

Science.gov (United States)

2011-03-18

... initiated a sequence of events leading to rupture of the drive arm of the IP Turbine (IPT) disc and...., West Building Ground Floor, Room W12-140, Washington, DC 20590-0001. Hand Delivery: Deliver to Mail...: Discussion The European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of...

77 FR 52201 - Airworthiness Directives; The Boeing Company Airplanes

Science.gov (United States)

2012-08-29

...) software in the airplane information management system (AIMS) hardware. We are issuing this AD to prevent T.... FOR FURTHER INFORMATION CONTACT: Margaret Langsted, Aerospace Engineer, Propulsion Branch, ANM-140S... tubing on the left and right Rolls-Royce RB211 Trent 800 engines; and installing AEDB software in the...

78 FR 71532 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

Science.gov (United States)

2013-11-29

... Deutschland Ltd & Co KG Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. [[Page 71533... (AD) 2007-03- 02 for all Rolls-Royce Deutschland (RRD) Tay 620-15, Tay 650-15, and Tay 651-54 turbofan..., January 29, 2007) (``AD 2007-03-02'') for certain RRD Tay 611-8 and Tay 620-15 turbofan engines with LP...

76 FR 51056 - In the Matter of Certain Turbomachinery Blades, Engines, and Components Thereof; Notice of...

Science.gov (United States)

2011-08-17

.... SUPPLEMENTARY INFORMATION: The Commission instituted this investigation on December 14, 2010, based on a...- Royce Group plc and Rolls-Royce plc, both of the United Kingdom. 75 FR 77904 (Dec. 14, 2010). The... parties moved to terminate the investigation based on a settlement. On July 22, 2011, the Commission...

Silencing of the tomato phosphatidylinositol-phospholipase C2 (SlPLC2) reduces plant susceptibility to Botrytis cinerea

NARCIS (Netherlands)

Gonorazky, Gabriela; Guzzo, María Carla; Abd-El-Haliem, Ahmed M.; Joosten, Matthieu H.A.J.; Laxalt, Ana María

2016-01-01

The tomato [Solanum lycopersicum (Sl)] phosphatidylinositol-phospholipase C (PI-PLC) gene family is composed of six members, named SlPLC1 to SlPLC6, differentially regulated on pathogen attack. We have previously shown that the fungal elicitor xylanase induces a raise of SlPLC2 and SlPLC5

Rotational dynamics of C60 in Na2RbC60

International Nuclear Information System (INIS)

Christides, C.; Prassides, K.; Neumann, D.A.; Copley, J.R.D.; Mizuki, J.; Tanigaki, K.; Hirosawa, I.; Ebbesen, T.W.

1993-01-01

We have measured the low-energy neutron inelastic-scattering (NIS) spectra of superconducting Na 2 RbC 60 in the temperature range 50-350 K. Well-defined librational peaks are observed at 50 K at 2.83(17) meV (FWHM = 1.7(5) meV). They soften and broaden with increasing temperature. Their behaviour mimics that found in solid C 60 and differs markedly from K 3 C 60 . The rotational barrier for C 60 reorientations in Na 2 RbC 60 is somewhat higher than in pristine C 60 and approximately half as large as in K 3 C 60 . An order-disorder transition is anticipated at a temperature higher than that found in C 60 . (orig.)

Precision engineering for future propulsion and power systems: a perspective from Rolls-Royce.

Science.gov (United States)

Beale, Sam

2012-08-28

Rolls-Royce today is an increasingly global business, supplying integrated power systems to a wide variety of customers for use on land, at sea and in the air. Its reputation for 'delivering excellence' to these customers has been built largely on its gas turbine technology portfolio, and this reputation relies on the quality of the company's expertise in design, manufacture and delivery of services. This paper sets out to examine a number of examples, such as the high-pressure turbine blade, of the company's reliance on precision design and manufacture, highlighting how this precision contributes to customer satisfaction with its products. A number of measures the company is taking to accelerate its competitiveness in precision manufacture are highlighted, not least its extensive relationships with the academic research base. The paper finishes by looking briefly at the demands of the company's potential future product portfolio.

78 FR 77382 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

Science.gov (United States)

2013-12-23

... Deutschland Ltd & Co KG Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of...-Royce Deutschland Ltd & Co KG (RRD) BR700-715A1-30, BR700-715B1- 30, and BR700-715C1-30 turbofan engines... turbofan engines installed on aircraft of U.S. registry. We also estimate that it would take about 24 hours...

Empirical P-L-C relations for delta Scuti stars

International Nuclear Information System (INIS)

Gupta, S.K.

1978-01-01

Separate P-L-C relations have been empirically derived by sampling the delta Scuti stars according to their pulsation modes. The results based on these relations have been compared with those estimated from the model based P-L-C relations and the other existing empirical P-L-C relations. It is found that a separate P-L-C relation for each pulsation mode provides a better correspondence with observations. (Auth.)

Fc gamma receptor activation induces the tyrosine phosphorylation of both phospholipase C (PLC)-gamma 1 and PLC-gamma 2 in natural killer cells

OpenAIRE

1992-01-01

Crosslinking of the low affinity immunoglobulin G (IgG) Fc receptor (Fc gamma R type III) on natural killer (NK) cells initiates antibody- dependent cellular cytotoxicity. During this process, Fc gamma R stimulation results in the rapid activation of phospholipase C (PLC), which hydrolyzes membrane phosphoinositides, generating inositol-1,4,5- trisphosphate and sn-1,2-diacylglycerol as second messengers. We have recently reported that PLC activation after Fc gamma R stimulation can be inhibit...

21 CFR 524.981c - Fluocinolone acetonide, neomycin sulfate cream.

Science.gov (United States)

2010-04-01

.... 524.981c Section 524.981c Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... dermatoses in dogs. It is used in the treatment of such conditions as allergic and acute moist dermatoses and nonspecific dermatoses in dogs. It is used in the treatment of wound infections in dogs and cats. (2) A small...

Phase equilibrium in the AgI-RbI-H2O system at 25 deg C

International Nuclear Information System (INIS)

Stepin, B.D.; Serebrennikova, G.M.; Sazikova, L.A.; Starikova, Z.A.

1977-01-01

The triple system of AgI-RbI-H 2 O at 25 deg C was studied by the isothermal method. The formation of the Rb 2 AgI 3 complex compound, which dissolves in water with decomposition, was established. A powder pattern of Rb 2 AgI 3 was indexed

Justification and manufacturing quality assurance for the use of hot Isostatically pressed, reactor coolant system components in PWR plant

International Nuclear Information System (INIS)

Sulley, J. L.; Hookham, I. D.

2008-01-01

This paper presents an overview of the work undertaken by Rolls-Royce to introduce Hot Isostatically Pressed (HIP) components into Pressurised Water Reactor plant. It presents the work from a design justification and manufacturing quality assurance perspective, rather than from a pure metallurgical perspective, although some metallurgical and mechanical property comparisons with the traditional forged material are presented. Although the HIP process is not new, it was new in its application to Rolls-Royce designed nuclear reactor plant. In order to satisfy the regulatory requirement of 'Proven Engineering Practices' with regard to the introduction of new material processes, and to provide a robust manufacturing substantiation leg of a multi-legged safety case, Rolls-Royce has implemented an evolving, staged approach, starting with HIP bonding of solid valve seats into small bore valve pressure boundaries. This was followed by powder HIP consolidation of leak-limited, thin-walled toroids, and has culminated in the powder HIP consolidation of components, such as steam generator headers, large bore valves and pipe sections. The paper provides an overview of each of these stages and the approach taken with respect to justification. The paper describes the benefits that Rolls-Royce has realised so far through the introduction of HIPed components, and improvements planned for the future. Structural integrity benefits are described, such as improved grain structure, mechanical properties, and ultrasonic inspection. Project-based benefits are also described, such as provision of an alternative strategic sourcing route, cost and lead-time reduction. A full description is provided of key quality assurance steps applied to the process to ensure a high quality product is delivered commensurate with a high integrity nuclear application. 2008 Rolls-Royce plc. (authors)

Portevin-Le Chatelier effect in rolled Al-Li based alloys

International Nuclear Information System (INIS)

Mizera, J.; Kurzydlowski, K.J.

2001-01-01

Studied were carried out on the Portevin-Le Chatelier (PLC) effect in binary, ternary and quaternary Al-Li alloys and in the commercial 8090 alloy. The correlation between the serration characteristic, the rolling degree and the straining orientation has been analysed. The fact that the presence of the Cu-containing precipitates intensifies the PLC effects suggests, that these are primarily related to the interactions between the dislocations and the semi-coherent T 1 (Al 2 CuLi) precipitates. The analysis of the PLC effect in Al-Li alloys shows that the serrations in the stress-strain curve exhibit a profound degree of anisotropy. Most pronounced PLC effects are observed along the rolling and transverse directions. (author)

Synthesis and Characterization of the Rubidium Thiophosphate Rb 6 (PS 5 )(P 2 S 10 ) and the Rubidium Silver Thiophosphates Rb 2 AgPS 4 , RbAg 5 (PS 4 ) 2 and Rb 3 Ag 9 (PS 4 ) 4

KAUST Repository

Alahmary, Fatimah S.

2016-02-18

The metal thiophosphates Rb2AgPS4 (2), RbAg5(PS4)2 (3), and Rb3Ag9(PS4)4 (4) were synthesized by stoichiometric reactions, whereas Rb6(PS5)(P2S10) (1) was prepared with excess amount of sulfur. The compounds crystallize as follows: 1 monoclinic, P21/c (no. 14), a = 17.0123(7) Å, b = 6.9102(2) Å, c = 23.179(1) Å, β = 94.399(4)°; 2 triclinic, P ¯ (no. 2), a = 6.600(1) Å, b = 6.856(1) Å, c = 10.943(3) Å, α = 95.150(2)°, β = 107.338(2)°, γ = 111.383(2)°; 3 orthorhombic, Pbca (no. 61), a = 12.607(1) Å, b = 12.612(1) Å, c = 17.759(2) Å; 4 orthorhombic, Pbcm (no. 57), a = 6.3481(2) Å, b = 12.5782(4) Å, c = 35.975(1) Å. The crystal structures contain discrete units, chains, and 3D polyanionic frameworks composed of PS4 tetrahedral units arranged and connected in different manner. Compounds 1-3 melt congruently, whereas incongruent melting behavior was observed for compound 4. 1-4 are semiconductors with bandgaps between 2.3 and 2.6 eV and thermally stable up to 450 °C in an inert atmosphere. Copyright © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Dicty_cDB: VHK211 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available VH (Link to library) VHK211 (Link to dictyBase) - - - - VHK211P (Link to Original site) VHK211F 605 VHK2...11Z 118 VHK211P 703 - - Show VHK211 Library VH (Link to library) Clone ID VHK211 (Link ...to dictyBase) Atlas ID - NBRP ID - dictyBase ID - Link to Contig - Original site URL http://dictycdb.biol.tsukuba.ac.jp/CSM/VH/VHK2...-A/VHK211Q.Seq.d/ Representative seq. ID VHK211P (Link to ...Original site) Representative DNA sequence >VHK211 (VHK211Q) /CSM/VH/VHK2-A/VHK211Q.Seq.d/ AACTCTCGAGTGCAAAA

Dicty_cDB: SLH211 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available SL (Link to library) SLH211 (Link to dictyBase) - - - Contig-U16162-1 SLH211Z (Link... to Original site) - - SLH211Z 427 - - - - Show SLH211 Library SL (Link to library) Clone ID SLH211 (Link to...ycdb.biol.tsukuba.ac.jp/CSM/SL/SLH2-A/SLH211Q.Seq.d/ Representative seq. ID SLH21...1Z (Link to Original site) Representative DNA sequence >SLH211 (SLH211Q) /CSM/SL/SLH2-A/SLH211Q.Seq.d/ XXXXX...equences producing significant alignments: (bits) Value SLI277 (SLI277Q) /CSM/SL/SLI2-D/SLI277Q.Seq.d/ 767 0.0 SLH211 (SLH2

Boronline, a new generation of boron meter

International Nuclear Information System (INIS)

Pirat, P.

2011-01-01

Rolls-Royce is a global business providing integrated power systems for use on land, at sea and in the air. The Group has a balanced business portfolio with leading market positions - civil aerospace, defence aerospace, marine and energy Rolls-Royce understands the challenges of design, procurement, manufacture, operation and in-service support of nuclear reactor plants, with over 50 years of experience through the Royal Navy submarine programme. Rolls-Royce can therefore offer full product life-cycle management for new civil nuclear installations, as well as support to existing installations, including plant lifetime extensions. Rolls-Royce produced for 40 years, Instrumentation and Control (I and C) systems of and associated services for nuclear reactors in Europe, including 58 French reactors and others situated in the United States and in others countries, such as China. Rolls-Royce equipped in this domain 200 nuclear reactors in 20 countries. Among all of its nuclear systems, Rolls Royce is presenting to the conference its new generation of on-line boron measurement system, so called Boronline. (authors)

R$_{b}$ - R$_{c}$ crisis and new physics

CERN Document Server

Bhattacharya, G; Hou Wei Shu; Bhattacharyya, Gautam; Branco, Gustavo C; Hou, Wei Shu

1996-01-01

The experimental values of R_b and R_c are the only data which do not seem to agree with Standard Model predictions. Although it is still premature to draw any definite conclusions, it is timely to look for new physics which could explain the excess in R_b and deficit in R_c. We investigate this problem in a simple extension of the Standard Model, where a charge +2/3 isosinglet quark is added to the standard spectrum. Upon the further introduction of an extra scalar doublet, one finds a solution with interesting consequences.

Fluorescence of RbH and RbD formed by irradiating the mixed gases Rb + H2 and Rb + D2 with laser light

International Nuclear Information System (INIS)

Kato, Hajime; Toyosaka, Yukiko; Suzuki, Tomonari

1985-01-01

When a mixture of 85 Rb, 85 Rb 2 , and D 2 was irradiated by laser light at 5145 or 4880 A, small visible particles appeared and the fluorescence spectra were observed. By analyzing these spectra, we determined the rotational constants B v and the centrifugal distortion constants D v and H v for the X 1 Σ + and A 1 Σ + states of 85 RbD. By considering the isotopic dependence of the Dunham coefficients, we determined various molecular constants of 85 RbH whose values were in good agreement with the observed fluorescence spectra of 85 RbH excited by laser lines at 4762, 4765, and 4880 A. The process of RbH formation is discussed. (author)

Systems of Rb2I2-CdI2-PbI2 and Cs2I2-CdI2-PbI2

International Nuclear Information System (INIS)

Volchanskaya, V.V.; Il'yasov, I.I.

1979-01-01

The Rb 2 I 2 -CdI 2 -PbI 2 and Cs 2 I 2 -CdI 2 -PbI 2 triple systems have been studied, using the visual-polythermal method. The liquidus of the systems researched consists of the components and compounds crystallization fields: 2RbIxCdI 2 , 2RbIxRbI 2 , RbIxPbI 2 and 2CsIxCdI 2 , 4CsIxPbI 2 , CsIxPbI 2 , respectively. The crystallization fields converge in four non-variant points at 360, 280, 205 and 192 deg C in the Rb 2 I 2 -CdI 2 -PbI 2 system and at 375, 368, 208 and 190 deg C in the CsI 2 -CdI 2 -PbI 2 system

Licensing experience with SPINLINE digital I/C platform - 15099

International Nuclear Information System (INIS)

Jegou, H.; Duthou, A.; Bach, J.; Burzynski, M.

2015-01-01

Rolls-Royce recently received a safety evaluation report from the NRC for the SPINLINE 3 digital safety instrumentation and control platform. The main Rolls-Royce interest in the NRC review was approval of the fail-safe, fault-tolerance, self-monitoring, deterministic, and communication independence features of the platform. The SPINLINE 3 platform consists of a set of standardized, modular hardware and software components and associated development tools. Rolls-Royce used a set of EPRI guidance documents to successfully develop a commercial grade dedication case of the platform. It was important to describe the technical critical characteristics for performance and dependability in the documentation submitted to NRC. The NRC audit forum was an important opportunity to effectively communicate complex technical information about the SPINLINE 3 platform. The NRC review had five interesting focus areas that offer opportunities for lessons learned. The main lesson learned is to put the same emphasis on the review for communication effectiveness as is put on the review for technical completeness and accuracy

78 FR 17300 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Science.gov (United States)

2013-03-21

... Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking..., 772-60, 772B-60, 875-17, 877-17, 884-17, 884B-17, 892-17, 892B-17, and 895-17 turbofan engines. The..., 892-17, 892B-17, and 895-17 turbofan engines. That AD requires continuing initial inspections, adding...

Synthesis, crystal structure, and properties of Na{sub 2}RbAuO{sub 2}; Synthese, Kristallstruktur und Eigenschaften von Na{sub 2}RbAuO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Mudring, A.V.; Jansen, M. [Max-Planck-Inst. fuer Festkoerperforschung, Stuttgart (Germany)

2001-02-01

Single phase samples of Na{sub 2}RbAuO{sub 2} were prepared by reacting RbAu with Na{sub 2}O{sub 2} in an equimolar ratio in sealed silver cylinders (placed under argon in glas tubes) at 400 C for two weeks. The colourless single crystals of needle shaped habitus decompose immediately when exposed to air. Na{sub 2}RbAuO{sub 2} (Pearsoncode oP12, Pnnm, a = 992.76(6), b = 559.03(3), c = 408.64(3) pm, Z = 2, 414 reflections with I{sub o} > 2{sigma}(I), R{sub 1} = 0.0363, wR{sub 2} = 0.1057) crystallizes isotypic with Na{sub 2}KAuO{sub 2}. Besides linear [O-Au-O] units, which are characteristic for oxoaurate(I), the structure reveals uncommon low coordination numbers for the alkali metal cations. (orig.)

Data communication between Panasonic PLC and PC using SerialPort control in C#.NET environment

Science.gov (United States)

Gao, Ting; Gan, Xiaochuan; Ma, Liqun

2015-02-01

With the gradual promotion of Microsoft.NET platform, C# as an object-oriented programming language based on the platform has been widely used. Therefore, more attention is concentrated on how to achieve the communication between Panasonic PLC and PC efficiently and fast in C#.NET environment. In this paper, a method of using SerialPort control which could be used for achieving communication between PLC and PC is introduced. Meanwhile, the reason of abnormal thread when displayed the receiving data in form is analyzed and the programming method to solve the problem of thread safety is designed. Achieving the communication of Panasonic PLC and PC in C#.NET environment can give full play to the advantages of the .NET framework. It is practical, easy communication, high reliability and can combine with other measurement and calibration procedures effectively and conveniently. Configuration software is expensive and can only communicate with PLC separately, but these shortcomings can be solved in C#.NET environment. A well-designed user interface realized real-time monitoring of PLC parameters and achieved management and control integration. The experiment show that this method of data transfer is accurate and the program' running is stable.

Complexing in the system Rb2SeO4-UO2SeO4-H2O

International Nuclear Information System (INIS)

Kuchumova, N.V.; Shtokova, I.P.; Serezhkina, L.B.; Serezhkin, V.N.

1989-01-01

Method of isothermal solubility at 25 deg C is used to study interaction of rubidium and uranyl selenates in aqueous solution. Formation of congruently soluble Rb 2 UO 2 (SeO 4 ) 2 x2H 2 O and Rb 2 (UO 2 ) 2 x(SeO 4 ) 3 x6H 2 O is stated. For the last compound crystallographic characteristics (a=10.668; b=14.935(9); c=13.891(7) A; β=104.94(1); Z=4, sp.gr. P2 1 /c) are determined. Thermal decomposition of a compound results in formation of Rb 2 U 2 O 7

Rb-intercalated C60 compounds studied by Inverse Photoemission Spectroscopy

International Nuclear Information System (INIS)

Finazzi, M.; Brambilla, A; Biagioni, P.; Cattoni, A.; Duo, L.; Ciccacci, F.; Braicovich, L.; Giovanelli, L.; Goldoni, A.

2004-01-01

Full text: Since the discovery of superconductivity in alkali-doped solid C 60 , the electronic structure of the host material (C 60 ) and the doped compounds (A x C 60 , where A is an alkali metal), has been the subject of a considerable amount of work, both theoretical and experimental. The spectroscopic investigations of the alkali-doped C 60 compounds has been mainly focussed on the valence states, while much less information is available on the unoccupied states. In particular, inverse photoemission data on the complete set of stable Rb x C 60 compounds was, so far, still missing. We have performed Inverse Photoemission (IPE) spectroscopy on Rb x C 60 compounds (x = 1, 3, 4, 6). IPE spectra were obtained using a band-pass photon detector (hv = 9.4 eV, FWHM = 0.7 eV) and scanning the kinetic energy of the electrons impinging on the sample. Rb was evaporated on C 60 films (thickness = 6-12 atomic layers) grown in situ on a Cu(100) substrate. The temperature of the substrate was kept equal to T = 100 deg C, which is lower than the C 60 sublimation temperature. The amount of Rb was checked by measuring the intensity of the C1s and Rb3d photoemission lines. After the required amount of Rb had been deposited, the samples were annealed to distillate the desired stable phase

Csseverin inhibits apoptosis through mitochondria-mediated pathways triggered by Ca2 + dyshomeostasis in hepatocarcinoma PLC cells.

Directory of Open Access Journals (Sweden)

Mengchen Shi

2017-11-01

Full Text Available Numerous experimental and epidemiological studies have demonstrated a link between Clonorchis sinensis (C. sinensis infestation and cholangiocarcinoma (CCA as well as hepatocellular carcinoma (HCC. The underlying molecular mechanism involved in the malignancy of CCA and HCC has not yet been addressed. Csseverin, a component of the excretory/secretory products of C. sinensis (CsESPs, was confirmed to cause obvious apoptotic inhibition in the human HCC cell line PLC. However, the antiapoptotic mechanism is unclear. In the present study, we investigated the cellular features of the antiapoptotic mechanism upon transfection of the Csseverin gene.In the present study, we evaluated the effects of Csseverin gene overexpression on the apoptosis of PLC cells using an Annexin PE/7-AAD assay. Western blotting was applied to quantify the activation of caspase-3 and caspase-9, the mitochondrial translocation of Bax and the release of Cyt c upon Csseverin overexpression in PLC cells. Laser scanning confocal microscopy was used to analyze the changes of intracellular calcium. Fluorescence assay and immunofluorescence assays were performed to observe the changes of the mitochondrial permeability transition pore (MPTP.The overexpression of Csseverin in PLC cells showed apoptosis resistance after the induction of apoptosis. Additionally, the activation of caspase-3 and caspase-9 was specifically weakened in Csseverin overexpression PLC cells. The overexpression of Csseverin reduced the increase in intracellular free Ca2+, thereby inhibiting MPTP opening in PLC cells. Moreover, Bax mitochondrial translocation and the subsequent release of Cyt c were downregulated in apoptotic Csseverin overexpression PLC cells.The present findings suggest that Csseverin, a component of CsESPs, confers protection from human HCC cell apoptosis via the inactivation of membranous Ca2+ channels. Csseverin might be involved in the process of HCC through C. sinensis infestation in

Hydrothermal synthesis and polymorphism of RbPr(MoO4)2

International Nuclear Information System (INIS)

Protasova, V.I.; Kharchenko, L.Yu.; Klevtsov, P.V.

1977-01-01

Hydrothermal method has been successfully used to obtain crystals of rubidium-rare-earth molibdates of RbLn(MoO 4 ) 2 composition (Ln is a rare earth element). In Rb 2 MoO 4 solutions at 575-600degC the RbPr(MoO 4 ) 2 crystals were obtained in a modification new for Rb-Ln-molibdates, i.e. isostructural to triclinic α-KEu(MoO 4 ) 2 , and in a structural modification of laminated rhombic KY(MoO 4 ) 2 type. Polymorphism of RbPr(MoO 4 ) 2 has been studied, four crystalline modifications found and their complex interchanges investigated

Hamilton's inclusive fitness maintains heritable altruism polymorphism through rb = c.

Science.gov (United States)

Wang, Changcao; Lu, Xin

2018-02-20

How can altruism evolve or be maintained in a selfish world? Hamilton's rule shows that the former process will occur when rb > c -the benefits to the recipients of an altruistic act b , weighted by the relatedness between the social partners r , exceed the costs to the altruists c -drives altruistic genotypes spreading against nonaltruistic ones. From this rule, we infer that altruistic genotypes will persist in a population by forming a stable heritable polymorphism with nonaltruistic genotypes if rb = c makes inclusive fitness of the two morphs equal. We test this prediction using the data of 12 years of study on a cooperatively breeding bird, the Tibetan ground tit Pseudopodoces humilis , where helping is performed by males only and kin-directed. Individual variation in ever acting as a helper was heritable ( h 2 = 0.47), and the resultant altruism polymorphism remained stable as indicated by low-level annual fluctuation of the percentage of helpers among all adult males (24-28%). Helpers' indirect fitness gains from increased lifetime reproductive success of related breeders statistically fully compensated for their lifetime direct fitness losses, suggesting that rb = c holds. While our work provides a fundamental support for Hamilton's idea, it highlights the equivalent inclusive fitness returns to altruists and nonaltruists mediated by rb = c as a theoretically and realistically important mechanism to maintain social polymorphism.

87Rb-NMR in Rb2ZnCl4 below the incommensurable phase

International Nuclear Information System (INIS)

Grande, S.; Moskvich, Yu.N.; Aleksandrova, I.P.

1983-01-01

In Rb 2 ZnCl 4 crystals the curly polar phase, which changes into the incommensurable phase below 192 K, has been investigated by pulsed NMR. The angular correlations of the second-order quadrupole shifts have been measured and the corresponding tensors of the electric field gradient have been calculated. The six Rb layers change differently in magnitude and orientation compared to the paraelectric phase. The temperature dependences within the C-phase are also different. The spin-lattice relaxation times have been measured and discussed for each layer in the C-phase. All relaxation times show an anomaly at a further phase transition occurring at 72 K connected with an increase of the number of spectral lines

Crystal structure of RbCe(SeO4)2 · 5H2O

International Nuclear Information System (INIS)

Ovanesyan, S.M.; Iskhakova, L.D.; Trunov, V.K.

1987-01-01

RbTR(SeO 4 ) 2 x5H 2 O TR=La-Pr are synthesized. Crystal structure of RbCe(SeO 4 ) 2 x5H 2 O is studied. Monoclinic unit parameters are: a=7,200(2), b=8,723(1), c=19,258(6) A, Β=90,88(2), ρ (calc) =3,304 sp.gr. P2 1 /c. Within the structure the Ce nine vertex cages are united by Se(1)- and Se(2)-tetrahedrons in (Ce(SeO 4 ) 2 (H 2 O) 5 ) 2 ∞ n- layers. Some crystal structure regularities of the laminated MTR(EO 4 ) 2 xnH 2 O (M=NH 4 ,K,Rb,Cs; TR=La-Ln, E=S,Se) are considered

Rb-intercalated C{sub 60} compounds studied by Inverse Photoemission Spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Finazzi, M; Brambilla, A; Biagioni, P; Cattoni, A; Duo, L; Ciccacci, F; Braicovich, L [INFM and Dip di Fisica del Politecnico di Milano, Milano (Italy); Giovanelli, L; Goldoni, A [ELETTRA Basovizza (Italy)

2004-07-01

Full text: Since the discovery of superconductivity in alkali-doped solid C{sub 60}, the electronic structure of the host material (C{sub 60}) and the doped compounds (A{sub x}C{sub 60}, where A is an alkali metal), has been the subject of a considerable amount of work, both theoretical and experimental. The spectroscopic investigations of the alkali-doped C{sub 60} compounds has been mainly focussed on the valence states, while much less information is available on the unoccupied states. In particular, inverse photoemission data on the complete set of stable Rb{sub x}C{sub 60} compounds was, so far, still missing. We have performed Inverse Photoemission (IPE) spectroscopy on Rb{sub x}C{sub 60} compounds (x = 1, 3, 4, 6). IPE spectra were obtained using a band-pass photon detector (hv = 9.4 eV, FWHM = 0.7 eV) and scanning the kinetic energy of the electrons impinging on the sample. Rb was evaporated on C{sub 60} films (thickness = 6-12 atomic layers) grown in situ on a Cu(100) substrate. The temperature of the substrate was kept equal to T = 100 deg C, which is lower than the C{sub 60} sublimation temperature. The amount of Rb was checked by measuring the intensity of the C1s and Rb3d photoemission lines. After the required amount of Rb had been deposited, the samples were annealed to distillate the desired stable phase.

Synthesis of (R,S)-[2,3-{sup 13}C{sub 2}]-1-(1`-methyl-2`-pyrrolidinyl)propan-2-one; {l_brace}(R,S)-[2`,3`-{sup 13}C{sub 2}]hygrinePound right bracePound

Energy Technology Data Exchange (ETDEWEB)

Abraham, T.W.; Leete, Edward [Minnesota Univ., Minneapolis, MN (United States). Dept. of Chemistry

1996-05-01

2-Ethoxy-1-methyl-5-pyrrolidinone (1) was reacted with ethyl [3,4-{sup 13}C{sub 2}]-acetoacetate (2) in the presence of TiCl{sub 4} to give ethyl [3,4-{sup 13}C{sub 2}]-2-(1`-methyl-5`-oxo-2`-pyrrolidinyl)-3-oxobutanoate (3) in 85% yield. Decarboethoxylation of ethyl [3,4-{sup 13}C{sub 2}]-2-(1`-methyl-5`-oxo-2`-pyrrolidinyl)-3-oxobutan-oate (3) was accomplished using NaCl and H{sub 2}O in DMSO to give (R,S)-[2,3-{sup 13}C{sub 2}]-1-(1`-methyl-5`-oxo-2`-pyrrolidinyl)propan-2-o ne (4) in 91% yield. Protection of the ketone as a ketal (ethylene glycol, H{sup +}), followed by reduction of the amide to the amine using LiAlH{sub 4} and subsequent deprotection of the ketal gave (R,S)-[2,3-{sup 13}C{sub 2}]-1-(1`-methyl-2`-pyrrolidinyl)propan-2-one ((R,s)-[2`, 3`-{sup 13}C{sub 2}]Hygrine) (8) in 78% yield. (61% overall yield from ethyl [3,4-{sup 13}C{sub 2}]acetoacetate). (Author).

Úzkopásmová PLC komunikace se standardy G3-PLC, PRIME a IEEE-1901.2

OpenAIRE

Skrášek, Tomáš

2015-01-01

Diplomová práce pojednává o standardech úzkopásmové PLC komunikace. V teoretické části jsou popsány všechny dostupné OFDM standardy, mezi něž patří G3-PLC, PRIME, IEEE-1901.2 a G.hnem. Praktická část se zabývá standardy PRIME a G3-PLC. Dále je také porovnán systém OFDM se systémem komunikace na jedné nosné frekvenci v prostředí s reálným rušením. V poslední části je popsán návrh dvou firmware pro PLC modemy Texas Instruments TMDSPLCKIT-V3, které umožňují UART komunikaci a dálkový sběr dat. K ...

78 FR 21428 - Royce Focus Trust, Inc., et al.;

Science.gov (United States)

2013-04-10

... SECURITIES AND EXCHANGE COMMISSION [Investment Company Act Release No. 30447; File No. 812-14034] Royce Focus Trust, Inc., et al.; Notice of Application April 4, 2013. AGENCY: Securities and Exchange... prior order (``Prior Order'').\\1\\ \\1\\ Royce Global Trust, Inc., et al., Investment Company Act Release...

Synthesis and Characterization of the Rubidium Thiophosphate Rb 6 (PS 5 )(P 2 S 10 ) and the Rubidium Silver Thiophosphates Rb 2 AgPS 4 , RbAg 5 (PS 4 ) 2 and Rb 3 Ag 9 (PS 4 ) 4

KAUST Repository

Alahmary, Fatimah S.; Davaasuren, Bambar; Khanderi, Jayaprakash; Rothenberger, Alexander

2016-01-01

The metal thiophosphates Rb2AgPS4 (2), RbAg5(PS4)2 (3), and Rb3Ag9(PS4)4 (4) were synthesized by stoichiometric reactions, whereas Rb6(PS5)(P2S10) (1) was prepared with excess amount of sulfur. The compounds crystallize as follows: 1 monoclinic, P21

PLC-dependent intracellular Ca2+ release was associated with C6-ceramide-induced inhibition of Na+ current in rat granule cells.

Science.gov (United States)

Liu, Zheng; Fei, Xiao-Wei; Fang, Yan-Jia; Shi, Wen-Jie; Zhang, Yu-Qiu; Mei, Yan-Ai

2008-09-01

In this report, the effects of C(6)-ceramide on the voltage-gated inward Na(+) currents (I(Na)), two types of main K(+) current [outward rectifier delayed K(+) current (I(K)) and outward transient K(+) current (I(A))], and cell death in cultured rat cerebellar granule cells were investigated. At concentrations of 0.01-100 microM, ceramide produced a dose-dependent and reversible inhibition of I(Na) without alteration of the steady-state activation and inactivation properties. Treatment with C(2)-ceramide caused a similar inhibitory effect on I(Na). However, dihydro-C(6)-ceramide failed to modulate I(Na). The effect of C(6)-ceramide on I(Na) was abolished by intracellular infusion of the Ca(2+)-chelating agent, 1,2-bis (2-aminophenoxy) ethane-N, N, N9, N9-tetraacetic acid, but was mimicked by application of caffeine. Blocking the release of Ca(2+) from the sarcoplasmic reticulum with ryanodine receptor blocker induced a gradual increase in I(Na) amplitude and eliminated the effect of ceramide on I(Na). In contrast, the blocker of the inositol 1,4,5-trisphosphate-sensitive Ca(2+) receptor did not affect the action of C(6)-ceramide. Intracellular application of GTPgammaS also induced a gradual decrease in I(Na) amplitude, while GDPbetaS eliminated the effect of C(6)-ceramide on I(Na). Furthermore, the C(6)-ceramide effect on I(Na) was abolished after application of the phospholipase C (PLC) blockers and was greatly reduced by the calmodulin inhibitors. Fluorescence staining showed that C(6)-ceramide decreased cell viability and blocking I(Na) by tetrodotoxin did not mimic the effect of C(6)-ceramide, and inhibiting intracellular Ca(2+) release by dantrolene could not decrease the C(6)-ceramide-induced cell death. We therefore suggest that increased PLC-dependent Ca(2+) release through the ryanodine-sensitive Ca(2+) receptor may be responsible for the C(6)-ceramide-induced inhibition of I(Na), which does not seem to be associated with C(6)-ceramide-induced granule

Phase precipitation of Yb 2+ ions in RbCl monocrystals monitored ...

African Journals Online (AJOL)

Optical absorption spectra of RbCl:Yb2+ crystals have been measured at several elevated temperatures up to 300C. Results showed that in hot RbCl:Yb2+ crystals, the Yb2+ ions occupied lattice sites with effective octahedral, O, point symmetry. Values of an energy parameter , which is an approximate measure of the ...

22 CFR 211.2 - Definitions.

Science.gov (United States)

2010-04-01

... otherwise. (e) Cooperative means a private sector organization whose members own and control the... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Definitions. 211.2 Section 211.2 Foreign..., ECONOMIC DEVELOPMENT AND OTHER ASSISTANCE § 211.2 Definitions. (a) A.I.D. means the Agency for...

Synthesis, single-crystal structure determination and Raman spectra of the tricyanomelaminates NaA{sub 5}[C{sub 6}N{sub 9}]{sub 2} . 4 H{sub 2}O (A = Rb, Cs)

Energy Technology Data Exchange (ETDEWEB)

Reckeweg, Olaf; DiSalvo, Francis J. [Cornell Univ., Ithaca, NY (United States). Baker Lab.; Schulz, Armin [Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany)

2016-07-01

Transparent colorless crystals of NaA{sub 5}[C{sub 6}N{sub 9}]{sub 2} . 4 H{sub 2}O (A = Rb, Cs) were obtained by blending aqueous solutions of Na{sub 3}[C{sub 6}N{sub 9}] and RbF or CsF, respectively, and subsequent evaporation of the water under ambient conditions. Both compounds crystallize in the space group P2{sub 1}/m (no. 11) with the cell parameters a = 815.56(16), b = 1637.7(4) and c = 1036.4(3) pm, and β = 110.738(12) for NaRb{sub 5}[C{sub 6}N{sub 9}]{sub 2} . 4 H{sub 2}O and a = 843.32(6), b = 1708.47(11) and c = 1052.42(7) pm, and β = 112.034(2) for NaCs{sub 5}[C{sub 6}N{sub 9}]{sub 2} . 4 H{sub 2}O, respectively. Raman spectra of the title compounds complement our results.

Protease-activated receptor-2 stimulates intestinal epithelial chloride transport through activation of PLC and selective PKC isoforms.

Science.gov (United States)

van der Merwe, Jacques Q; Moreau, France; MacNaughton, Wallace K

2009-06-01

Serine proteases play important physiological roles through their activity at G protein-coupled protease-activated receptors (PARs). We examined the roles that specific phospholipase (PL) C and protein kinase (PK) C (PKC) isoforms play in the regulation of PAR(2)-stimulated chloride secretion in intestinal epithelial cells. Confluent SCBN epithelial monolayers were grown on Snapwell supports and mounted in modified Ussing chambers. Short-circuit current (I(sc)) responses to basolateral application of the selective PAR(2) activating peptide, SLIGRL-NH(2), were monitored as a measure of net electrogenic ion transport caused by PAR(2) activation. SLIGRL-NH(2) induced a transient I(sc) response that was significantly reduced by inhibitors of PLC (U73122), phosphoinositol-PLC (ET-18), phosphatidylcholine-PLC (D609), and phosphatidylinositol 3-kinase (PI3K; LY294002). Immunoblot analysis revealed the phosphorylation of both PLCbeta and PLCgamma following PAR(2) activation. Pretreatment of the cells with inhibitors of PKC (GF 109203X), PKCalpha/betaI (Gö6976), and PKCdelta (rottlerin), but not PKCzeta (selective pseudosubstrate inhibitor), also attenuated this response. Cellular fractionation and immunoblot analysis, as well as confocal immunocytochemistry, revealed increases of PKCbetaI, PKCdelta, and PKCepsilon, but not PKCalpha or PKCzeta, in membrane fractions following PAR(2) activation. Pretreatment of the cells with U73122, ET-18, or D609 inhibited PKC activation. Inhibition of PI3K activity only prevented PKCdelta translocation. Immunoblots revealed that PAR(2) activation induced phosphorylation of both cRaf and ERK1/2 via PKCdelta. Inhibition of PKCbetaI and PI3K had only a partial effect on this response. We conclude that basolateral PAR(2)-induced chloride secretion involves activation of PKCbetaI and PKCdelta via a PLC-dependent mechanism resulting in the stimulation of cRaf and ERK1/2 signaling.

Upgradation in SCADA and PLC of existing LN_2 control system for SST-1

International Nuclear Information System (INIS)

Panchal, Pradip; Mahesuria, Gaurang; Panchal, Rohit; Patel, Rakesh; Sonara, Dashrath; Pitroda, Dipen; Nimavat, Hiren; Tanna, Vipul; Pradhan, Subrata

2016-01-01

Highlights: • The control system of LN_2 Management System of SST-1 is designed on PLC and SCADA. • The implementation and results of up-gradation in PLC and SCADA are reported. • The up-gradation in PLC and SCADA has improved the reliability & availability of SST-1 LN_2 system. - Abstract: Helium Refrigerator/Liquefier system of Steady State Superconducting Tokamak (SST-1) incorporates Liquid Nitrogen (LN_2) pre-cooling system. LN_2 is used for 80 K thermal shields of SST-1, current feeder system and integrated flow distribution and control system. The LN_2 management system is distributed system and requires automatic control. Initially LN_2 control system had Citect based Supervisory Control and Data Acquisition (SCADA) and Koyo make Programmable Logic Controller (PLC). With the passage of time and due to unavailability of their hardware, it is being obsoleted. So, the requirements of new PLC and SCADA systems have been envisaged to make uninterruptable operation of SST-1 cryogenic system. Therefore, Wonderware SCADA and Schneider Electric make PLC is programmed to replace Citect SCADA and Koyo PLC. New control features have been added in upgraded control system for better management of LN_2 system. This upgradation of SCADA and PLC is completed, tested successfully and in operation. Operational performance highlights of the new upgraded system are presented in this paper.

Biochemical characterization of the tomato phosphatidylinositol-specific phospholipase C (PI-PLC) family and its role in plant immunity

NARCIS (Netherlands)

Abd-El-Haliem, Ahmed; Vossen, J.H.; Zeijl, van Arjan; Dezhsetan, Sara; Testerink, Christa; Seidl, M.F.; Beck, Martina; Strutt, James; Robatzek, Silke; Joosten, M.H.A.J.

2016-01-01

Plants possess effective mechanisms to quickly respond to biotic and abiotic stresses. The rapid activation of phosphatidylinositol-specific phospholipase C (PLC) enzymes occurs early after the stimulation of plant immune-receptors. Genomes of different plant species encode multiple PLC homologs

A cDNA encoding a pRB-binding protein with properties of the transcription factor E2F

DEFF Research Database (Denmark)

Helin, K; Lees, J A; Vidal, M

1992-01-01

The retinoblastoma protein (pRB) plays an important role in the control of cell proliferation, apparently by binding to and regulating cellular transcription factors such as E2F. Here we describe the characterization of a cDNA clone that encodes a protein with properties of E2F. This clone, RBP3...

Project W-211, initial tank retrieval systems, retrieval control system software configuration management plan

International Nuclear Information System (INIS)

RIECK, C.A.

1999-01-01

This Software Configuration Management Plan (SCMP) provides the instructions for change control of the W-211 Project, Retrieval Control System (RCS) software after initial approval/release but prior to the transfer of custody to the waste tank operations contractor. This plan applies to the W-211 system software developed by the project, consisting of the computer human-machine interface (HMI) and programmable logic controller (PLC) software source and executable code, for production use by the waste tank operations contractor. The plan encompasses that portion of the W-211 RCS software represented on project-specific AUTOCAD drawings that are released as part of the C1 definitive design package (these drawings are identified on the drawing list associated with each C-1 package), and the associated software code. Implementation of the plan is required for formal acceptance testing and production release. The software configuration management plan does not apply to reports and data generated by the software except where specifically identified. Control of information produced by the software once it has been transferred for operation is the responsibility of the receiving organization

BCM6: New Generation of Boron Meter

International Nuclear Information System (INIS)

Pirat, P.

2010-01-01

Full text of publication follows: Rolls-Royce has developed a new generation of boron meter, based on more than 30 years of experience. The Rolls-Royce BCM6 boron meter provides Nuclear Power Plant (NPP) operators with the boron concentration of the primary circuit. The meter provides continuous and safe measurements with no manual sampling and no human contact. In this paper, technical features, advantages and customer benefits of the use of the new generation of Rolls-Royce BCM6 boron meter will be detailed. Values and associated alarms are provides over different media: 4-20 mA outputs, relays, displays in the main control room and in the chemical lab, and digital links. A special alarm avoids unexpected homogeneous dilution of the primary circuit, which is a critical operational parameter. The Rolls-Royce BCM6 boron meter is fully configurable over a set of parameters allowing adaptation to customer needs. It has a differential capability, thus eliminating neutronic noise and keeping measurements accurate, even in the case of fuel clad rupture. Measurements are accurate, reliable, and have a quick response time. Equipment meets state-of-the-art qualification requests. Designed in 2008, the BCM6 boron meter is the newest equipment of Rolls-Royce boron meters product line. It has been chosen to equip the French EPR NPP and complies with the state-of-the-art of the technology. Rolls-Royce has more than 30 years of experience in Instrumentation and Controls with more than 75 NPP units operating worldwide. All of this experience return has been put in this new generation of equipment to provide the customer with the best operation. About Rolls-Royce Rolls-Royce is a global business providing integrated power systems for use on land, at sea and in the air. The Group has a balanced business portfolio with leading market positions. Rolls-Royce has a broad range of civil nuclear expertise, including work related to licensing and safety reviews, engineering design

Measuring Quality Satisfaction with Servqual Model

Directory of Open Access Journals (Sweden)

Dan Păuna

2012-05-01

Full Text Available The orientation to customer satisfaction is not a recent phenomenon, many very successfulbusinesspeople from the beginning of the 20th century, such as Sir Henry Royce, a name synonymous withRoll – Royce vehicles, stated the first principle regarding customer satisfaction “Our interest in the Roll-Royce cars does not end at the moment when the owner pays for and takes delivery the car. Our interest in thecar never wanes. Our ambition is that every purchaser of the Rolls - Royce car shall continue to be more thansatisfied (Rolls-Royce.” The following paper tries to deal with the important qualities of the concept for themeasuring of the gap between expected costumer services satisfactions, and perceived services like a routinecustomer feedback process, by means of a relatively new model, the Servqual model.

Solucions PLC obertes

OpenAIRE

López Llauradó, Oriol

2006-01-01

Treball que, després de revisar el concepte de PLC i d'exposar la necessitat de solucions obertes, defineix el concepte de PLC obert, basat en programari lliure i presenta alguns projectes interessants de PLC obert. Trabajo que, después de revisar el concepto de PLC y de exponer la necesidad de soluciones abiertas, define el concepto de PLC abierto, basado en el software libre y presenta algunos proyectos interesantes de PLC abierto. Study that, after looking at the concept of PLC and s...

Upgradation in SCADA and PLC of existing LN{sub 2} control system for SST-1

Energy Technology Data Exchange (ETDEWEB)

Panchal, Pradip, E-mail: pradip@ipr.res.in; Mahesuria, Gaurang; Panchal, Rohit; Patel, Rakesh; Sonara, Dashrath; Pitroda, Dipen; Nimavat, Hiren; Tanna, Vipul; Pradhan, Subrata

2016-11-15

Highlights: • The control system of LN{sub 2} Management System of SST-1 is designed on PLC and SCADA. • The implementation and results of up-gradation in PLC and SCADA are reported. • The up-gradation in PLC and SCADA has improved the reliability & availability of SST-1 LN{sub 2} system. - Abstract: Helium Refrigerator/Liquefier system of Steady State Superconducting Tokamak (SST-1) incorporates Liquid Nitrogen (LN{sub 2}) pre-cooling system. LN{sub 2} is used for 80 K thermal shields of SST-1, current feeder system and integrated flow distribution and control system. The LN{sub 2} management system is distributed system and requires automatic control. Initially LN{sub 2} control system had Citect based Supervisory Control and Data Acquisition (SCADA) and Koyo make Programmable Logic Controller (PLC). With the passage of time and due to unavailability of their hardware, it is being obsoleted. So, the requirements of new PLC and SCADA systems have been envisaged to make uninterruptable operation of SST-1 cryogenic system. Therefore, Wonderware SCADA and Schneider Electric make PLC is programmed to replace Citect SCADA and Koyo PLC. New control features have been added in upgraded control system for better management of LN{sub 2} system. This upgradation of SCADA and PLC is completed, tested successfully and in operation. Operational performance highlights of the new upgraded system are presented in this paper.

Rb-intercalated C60 compounds studied by photoemission spectroscopies

International Nuclear Information System (INIS)

Brambilla, A.; Giovanelli, L.; Vilmercati, P.; Cattoni, A.; Biagioni, P.; Goldoni, A.; Finazzi, M.; Duo, L.

2005-01-01

We report on a combined photoemission and inverse photoemission spectroscopy analysis on Rb x C 60 compounds with different stoichiometries (0-bar x-bar 6). Apart from shifts and broadening of the spectral features associated to the different phase formed, we observe in the RbC 60 phase the presence of the highest occupied molecular orbital (HOMO) shoulder and of its symmetric (with respect to the Fermi level) empty state. According to calculations, the metallicity of this phase and the presence of these electronic states may be taken as a fingerprint of the interplay between electron-electron and electron-phonon interactions in determining the electronic behavior of alkali metal fullerides

29 CFR 2.11 - General principles.

Science.gov (United States)

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true General principles. 2.11 Section 2.11 Labor Office of the Secretary of Labor GENERAL REGULATIONS Audiovisual Coverage of Administrative Hearings § 2.11 General principles. The following general principles will be observed in granting or denying requests for permission...

Praksisnær skoleudvikling og PLC som strategisk udviklingsaktør

DEFF Research Database (Denmark)

Christensen, Ole; Bach, Anna

2017-01-01

I det følgende belyses, hvorledes PLC kan udvikles som strategisk udviklingsaktør og understøtte praksisnær skoleudvikling. Vi ønsker at belyse hvorledes Bekendtgørelsens overordnede intentioner kan få retning og rammer og dermed medvirke til, at hele det pædagogiske personale indgår i skoleudvik......I det følgende belyses, hvorledes PLC kan udvikles som strategisk udviklingsaktør og understøtte praksisnær skoleudvikling. Vi ønsker at belyse hvorledes Bekendtgørelsens overordnede intentioner kan få retning og rammer og dermed medvirke til, at hele det pædagogiske personale indgår i...... skoleudviklingen. I den forbindelse er det vores erfaring, at PLC kan spille en central rolle i forbindelse med den praksisnære og lokale skoleudvikling. Erfaringerne bygger især på udviklings- og forskningsprojekter fra kommunerne Kolding, København, Roskilde og Tårnby. Der har været tale om praksisnære...

One-dimensional zinc selenophosphates: A_2ZnP_2Se_6 (A = K, Rb, Cs)

International Nuclear Information System (INIS)

Haynes, Alyssa S.; Lee, Katherine; Kanatzidis, Mercouri G.

2016-01-01

The new compounds A_2ZnP_2Se_6 (A = K, Rb, Cs) were synthesized via molten salt flux syntheses. The crystals feature one-dimensional "1/_∞[ZnP_2Se_6]"2"- chains charge balanced by alkali metal ions between the chains. K_2ZnP_2Se_6 crystallizes in the monoclinic space group P2_1/c; cell parameters a = 12.537(3) Aa, b = 7.2742(14) Aa, c = 14.164(3) Aa, β = 109.63(3) , Z = 4, and V = 1216.7(4) Aa"3. Rb_2ZnP_2Se_6 and Cs_2ZnP_2Se_6 are isotypic, crystallizing in the triclinic space group P anti 1. Rb_2ZnP_2Se_6 has cell parameters of a = 7.4944(15) Aa, b = 7.6013(15) Aa, c = 12.729(3) Aa, α = 96.57(3) , β = 105.52(3) , γ = 110.54(3) , Z = 2, and V = 636.6(2) Aa"3. Cs_2ZnP_2Se_6 has cell parameters of a = 7.6543(6) Aa, b = 7.7006(6) Aa, c = 12.7373(11) Aa, α = 97.007(7) , β = 104.335(7) , γ = 109.241(6) , Z = 2, and V = 669.54(10) Aa"3. (Copyright copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Comparative assessment of microstructure and texture in the Fe-30.5Mn-8.0Al-1.2C and Fe-30.5Mn-2.1Al-1.2C steels under cold rolling

Directory of Open Access Journals (Sweden)

Fabrício Mendes Souza

Full Text Available Abstract Investigation of microstructure and texture has been done for cold rolled Fe-30.5Mn-8.0Al-1.2C (8Al and Fe-30.5Mn-2.1Al-1.2C (2Al (wt.% steels. They were rolled to a strain of ~0.70. Refinement of a crystallographic slip band substructure in low to medium rolling strain and nucleation of twins on the mature slip bands at a higher strain were suggested as deformation mechanisms in the 8Al steel. Mainly shear banding contributed to the formation of a Copper texture in such steel. Brass-texture development in the 2Al steel is mainly due to deformation twinning and shear banding formation. Detailed images of KAM maps showed that the stored deformation energy was mainly localized in the twinned areas and shear bands, which generated the inhomogeneous deformation microstructures in both steels at a higher strain. Goss and Brass texture intensity decreases and Cu-texture intensity increases as the Al wt.% increases in different cold rolled High-Mn (Mn ~30 wt.% steels.

Investigation of the magnetic structure of KFeCl3, KFeBr3, Rb2MnCl4, and Rb3Mn2Cl7 compounds with magnetic correlations in one and two dimensions

International Nuclear Information System (INIS)

Gurewitz, E.

1976-12-01

The crystallographic structure of KFeCl 3 and KFeBr 3 consists of (FeCl) - octahedra packed in isolated zigzagging chains. These compounds order antiferromagnetically at Tsub(N) approximately 16 deg K and Tsub(N) approximately 9.5 deg K, respectively. Below Tsub(N) the Fe 2+ magnetic moments within a chain are ferromagnetically coupled, parallel to the chain axis, while the chains are coupled antiferromagnetically. In the temperatures Tsub(N) 3 has magnetic correlations within the chains only, whereas the correlations between the chains are negligible. Moessbauer effect measurements at these temperatures show a distinct hyperfine magnetic splitting, characteristic of relaxation phenomena. Cs 2 MnCl 4 , Rb 2 MnCl 4 and Rb 3 Mn 2 Cl 7 belong to the Asub(n+1)Bsub(n)Xsub(3n+1) family of compounds, with the Dsub(4h)sup(17) space group. These compounds order antiferromagnetically at Tsub(N) approximately 55 deg K for Cs 2 MnCl 4 and Rb 2 MnCl 4 , and Tsub(N) approximately 64.5 deg K for Rb 3 Mn 2 Cl 7 . Below Tsub(N) each Mn 2+ moment is along the c-axis and is coupled antiferromagnetically to the moments of its nearest neighbours (nn). These compounds behave like a two-dimensional antiferromagnet at T >= Tsub(N). Neutron scans of the reciprocal space exhibit rods of reflections along c vectorsup(*). The negligible interactions between next nn sets of MnCl 2 layers, a distance c vector apart, yield both in Rb 2 MnCl 4 and in Rb 3 Mn 2 Cl 7 , two distinctive magnetic structures (polytypes) below Tsub(N). (author)

Neutron-Scattering Study of Spin Waves in the Ferrimagnet RbNiF3

DEFF Research Database (Denmark)

Als-Nielsen, Jens Aage; Birgeneau, R. J.; Guggenheim, H. J.

1972-01-01

-wave theory with JAB=(93.2±2)°K, JBB=-(21.1±2)°K (H=Σi>jJijS⃗i·S⃗j, S=1), and with all other exchange constants set to zero. Using these exchange constants we can satisfactorily account for other magnetic properties such as the high-temperature susceptibility, the sublattice magnetizations in a field, and two-magnon...... Raman scattering. At higher temperatures it is found that the c-axis acoustic magnons renormalize like the magnetization, whereas the high-lying optic modes are nearly temperature independent. This leads one to the physical picture in which RbNiF3 at high temperatures is viewed as a set of strongly...

PLC Programming

International Nuclear Information System (INIS)

Lee, Seong Jae; Wi, Seong Dong; Yoo, Jong Seon; Kim, Se Chan

2001-02-01

This book tells of PLC programming for KGL-WIN with summary of PLC, performance and function of PLC like characteristic of KGL-WIN, connection method with PLC, basic performance of K200S/K300S/K1000S, diagram of input and output H/W, writing project, staring the program, editing of program, on-line function, debugging and instructions like control, timer and counter, data transmission, comparison, rotation and moving, system, data operating data conversion and application program.

A gravimetric and an X-ray fluorescence method for the determination of rubidium in Rb2U(SO4)3

International Nuclear Information System (INIS)

Mudher, K.D.S.; Krishnan, K.; Jayadevan, N.C.

1993-01-01

Chemical characterization of rubidium uranium(IV) trisulfate, RB 2 U(SO 4 ) 3 , a new chemical assay standard for uranium requires accurate analysis of rubidium. A gravimetric and an X-ray fluorescence method (XRF) for the determination of rubidium in this compound are described. In the gravimetric method, rubidium is determined as Rb 2 Na[Co(NO 2 ) 6 ].H 2 O without separating uranium with a precision of the order of ±0.5%. In the XRF method, the concentration ratio of rubidium to uranium, C Rb /C U , is determined in the solid samples by the binary ratio method using calibration between intensity ratios (I Rb /I U ) and concentration ratios (C Rb /C U ). (author) 6 refs.; 2 figs.; 3 tabs

Wavelet-OFDM Signal Transmission Characteristics with High-Speed PLC Modem

Science.gov (United States)

Nakagawa, Kenichi; Tokuda, Masamitsu; Igata, Yuji

In this paper, we measured the interference immunity characteristics of high-speed PLC system using Wavelet-OFDM when the narrowband conducted interference wave signal was injected. As the results, it was clear that (1) measured PHY rate at the all frequency band hardly decreased in C/I (Carrier to Interference ratio) of above 20dB, but began to decrease rapidly in C/I of below 0dB when the interference signal was injected in the frequency band of high-speed PLC signal, (2) when C/I became from 0dB to -20dB, the measured PHY rate at the frequency existing the notch band were improved around 10Mbps than that at the frequency not existing the notch band, (3) when the narrowband interference wave was injected outside of frequency band of high-speed PLC signal, the measured PHY rate did not decrease than that in each notch band. Therefore, it was revealed that high-speed PLC system using Wavelet-OFDM had good interference immunity characteristics.

A cGMP kinase mutant with increased sensitivity to the protein kinase inhibitor peptide PKI(5-24).

Science.gov (United States)

Ruth, P; Kamm, S; Nau, U; Pfeifer, A; Hofmann, F

1996-01-01

Synthetic peptides corresponding to the active domain of the heat-stable inhibitor protein PKI are very potent inhibitors of cAMP-dependent protein kinase, but are extremely weak inhibitors of cGMP-dependent protein kinase. In this study, we tried to confer PKI sensitivity to cGMP kinase by site-directed mutagenesis. The molecular requirements for high affinity inhibition by PKI were deduced from the crystal structure of the cAMP kinase/PKI complex. A prominent site of interaction are residues Tyr235 and Phe239 in the catalytic subunit, which from a sandwich-like structure with Phe10 of the PKI(5-24) peptide. To increase the sensitivity for PKI, the cGMP kinase codons at the corresponding sites, Ser555 and Ser559, were changed to Tyr and Phe. The mutant cGMP kinase was stimulated half maximally by cGMP at 3-fold higher concentrations (240 nM) than the wild type (77 nM). Wild type and mutant cGMP kinase did not differ significantly in their Km and Vmax for three different substrate peptides. The PKI(5-24) peptide inhibited phosphotransferase activity of the mutant cGMP kinase with higher potency than that of wild type, with Ki values of 42 +/- .3 microM and 160 +/- .7 microM, respectively. The increased affinity of the mutant cGMP kinase was specific for the PKI(5-24) peptide. Mutation of the essential Phe10 in the PKI(5-24) sequence to an Ala yielded a peptide that inhibited mutant and wild type cGMP kinase with similar potency, with Ki values of 160 +/- 11 and 169 +/- 27 microM, respectively. These results suggest that the mutations Ser555Tyr and Ser559Phe are required, but not sufficient, for high affinity inhibition of cGMP kinase by PKI.

PLC Berbasis Mikrokontroler Atmega16 Sebagai Pengganti PLC Konvensional

OpenAIRE

Brama, Adi; Kurniawan, Syafi’i Agus; Djaohar, Mochammad

2015-01-01

Making the research aims to design and build a PLC (Programmable Logic Controller) that uses a microcontroller ATmega16 as the brain of the Micro PLC system. The process of manufacture, testing is done in simulation tools at Pustikom State University of Jakarta and completed the process in May-June 2015. PLC Microcontroller ATmega16-Based As Substitute Conventional PLC, and use the application on a laptop LDmicro to make instructions that form the ladder program to run the output in the form ...

Physical and Functional Interactions between ELL2 and RB in the Suppression of Prostate Cancer Cell Proliferation, Migration, and Invasion

Directory of Open Access Journals (Sweden)

Xiaonan Qiu

2017-03-01

Full Text Available Elongation factor, RNA polymerase II, 2 (ELL2 is expressed and regulated by androgens in the prostate. ELL2 and ELL-associated factor 2 (EAF2 form a stable complex, and their orthologs in Caenorhabditis elegans appear to be functionally similar. In C. elegans, the EAF2 ortholog eaf-1 was reported to interact with the retinoblastoma (RB pathway to control development and fertility in worms. Because RB loss is frequent in prostate cancer, ELL2 interaction with RB might be important for prostate homeostasis. The present study explored physical and functional interaction of ELL2 with RB in prostate cancer. ELL2 expression in human prostate cancer specimens was detected using quantitative polymerase chain reaction coupled with laser capture microdissection. Co-immunoprecipitation coupled with deletion mutagenesis was used to determine ELL2 association with RB. Functional interaction between ELL2 and RB was tested using siRNA knockdown, BrdU incorporation, Transwell, and/or invasion assays in LNCaP, C4-2, and 22Rv1 prostate cancer cells. ELL2 expression was downregulated in high–Gleason score prostate cancer specimens. ELL2 could be bound and stabilized by RB, and this interaction was mediated through the N-terminus of ELL2 and the C-terminus of RB. Concurrent siRNA knockdown of ELL2 and RB enhanced cell proliferation, migration, and invasion as compared to knockdown of ELL2 or RB alone in prostate cancer cells. ELL2 and RB can interact physically and functionally to suppress prostate cancer progression.

Supply Cain Risk Management

OpenAIRE

Goodwin, Les

2011-01-01

“The management of supply chain risk is crucial to any business, more so to Rolls Royce who face an almost doubling of load within the next 10 years. So what is supply chain risk management and how well is it deployed within an operational business of Rolls Royce? What are the tools and techniques available and what are the key issues around implementing world class supply chain risk management with a Supply Chain Unit within Rolls Royce?”

Studies on the decoupled rotation bands in the nuclei 79Rb, 81Rb, and 79Kr

International Nuclear Information System (INIS)

Panqueva Alvarez, J.H.

1982-01-01

High spin states in 79 Rb, 81 Rb, and 79 Kr were studied by means of the following reactions: 63 Cu( 19 F,p2n) 79 Rb, 70 Ge( 12 C,p2n) 79 Rb, 65 Cu( 16 O,2n) 79 Rb, 65 Cu( 19 F,p2n) 81 Rb, 63 Cu( 19 F,2pn) 79 Kr, and 70 Ge( 12 C,2pn) 79 Kr. On the base of γ single spectra, excitation functions, γ angular distributions, γγ and nγ coincidences, RDDS- and DSA lifetime measurements a level scheme of 79 Rb with 13 new found excited states is proposed. Also a series of stretched E2-transitions between posivite parity states in 79 Kr could be identified. The observed M1 and E2 transition probabilities, which were obtained via the experimental determination of the lifetime as well the branching ratio of 26 excited states, form the base for a comprehensive discussion of the nuclear structure of the studied isotopes. For this reason theoretical calculations with the asymmetric rotor-plus-quasiparticle with variable moment of inertia (AROVMI) as well with the interacting boson-fermion (IBVM) model were performed. The good agreement between experiment and theory permits to relate the decrease of the B(E2)-values in 79 Rb to a finite dimensional (N=8) boson space, to cancel the discrepancies stated by Friederichs et.al., and to analyze 79 Kr the influence of a gsub(9/2) neutron on the deformation of the 78 Kr core. (orig./HSI) [de

The Cish SH2 domain is essential for PLC-γ1 regulation in TCR stimulated CD8+ T cells.

Science.gov (United States)

Guittard, Geoffrey; Dios-Esponera, Ana; Palmer, Douglas C; Akpan, Itoro; Barr, Valarie A; Manna, Asit; Restifo, Nicholas P; Samelson, Lawrence E

2018-03-28

Cish, participates within a multi-molecular E3 ubiquitin ligase complex, which ubiquitinates target proteins. It has an inhibitory effect on T cell activation mediated by PLC-γ1 regulation, and it functions as a potent checkpoint in CD8 + T cell tumor immunotherapy. To study the structural and functional relationships between Cish and PLC-γ1 during CD8 + T cell activation, we tested mutants of the Cish-SH2 (R107K) and D/BC (L222Q, C226Q) domains. We confirmed that Cish-SH2-specific binding was essential for PLC-γ1 ubiquitination and degradation. This domain was essential for the Cish-mediated inhibition of Ca 2+ release upon TCR stimulation. No effect on inhibition of cytokine release was observed with SH2 or D/BC mutants, although the absence of Cish led to an increased release of IFN-γ and TNF-α. Using imaging we showed that Cish was expressed mostly in the cytoplasm and we did not see any Cish clustering at the plasma membrane upon stimulation. We conclude that the Cish-SH2 domain is essential for PLC-γ1 regulation in TCR-stimulated CD8 + T cells.

Experimentally aided development of a turbine heat transfer prediction method

International Nuclear Information System (INIS)

Forest, A.E.; White, A.J.; Lai, C.C.; Guo, S.M.; Oldfield, M.L.G.; Lock, G.D.

2004-01-01

In the design of cooled turbomachinery blading a central role is played by the computer methods used to optimise the aerodynamic and thermal performance of the turbine aerofoils. Estimates of the heat load on the turbine blading should be as accurate as possible, in order that adequate life may be obtained with the minimum cooling air requirement. Computer methods are required which are able to model transonic flows, which are a mixture of high temperature combustion gases and relatively cool air injected through holes in the aerofoil surface. These holes may be of complex geometry, devised after empirical studies of the optimum shape and the most cost effective manufacturing technology. The method used here is a further development of the heat transfer design code (HTDC), originally written by Rolls-Royce plc under subcontract to Rolls-Royce Inc for the United States Air Force. The physical principles of the modelling employed in the code are explained without extensive mathematical details. The paper describes the calibration of the code in conjunction with a series of experimental measurements on a scale model of a high-pressure nozzle guide vane at non-dimensionally correct engine conditions. The results are encouraging, although indicating that some further work is required in modelling highly accelerated pressure surface flow

20 CFR 211.2 - Definition of compensation.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Definition of compensation. 211.2 Section 211.2 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT CREDITABLE RAILROAD COMPENSATION § 211.2 Definition of compensation. (a) The term compensation means any form...

Translation of PLC Programs to x86 for Simulation and Verification

CERN Document Server

Sallai, Gyula

2017-01-01

PLC programs are written in special languages, variants of the languages defined in the IEC 61131 standard. These programs cannot be directly executed on personal computers (on x86 architecture). To perform simulation of the PLC program or diagnostics during development, either a real PLC or a PLC simulator has to be used. However, these solutions are often inflexible and they do not provide appropriate performance. By generating x86-representations (semantically equivalent programs which can be executed on PCs, e.g. written in C, C++ or Java) of the PLC programs, some of these challenges could be met. PLCverif is a PLC program verification tool developed at CERN which includes a parser for Siemens PLC programs. In this work, we describe a code generator based on this parser of PLCverif. This work explores the possibilities and challenges of generating programs in widely-used general purpose languages from PLC programs, and provides a proof-of-concept code generation implementation. The presented solution dem...

Amarogentin, a secoiridoid glycoside, abrogates platelet activation through PLC γ 2-PKC and MAPK pathways.

Science.gov (United States)

Yen, Ting-Lin; Lu, Wan-Jung; Lien, Li-Ming; Thomas, Philip Aloysius; Lee, Tzu-Yin; Chiu, Hou-Chang; Sheu, Joen-Rong; Lin, Kuan-Hung

2014-01-01

Amarogentin, an active principle of Gentiana lutea, possess antitumorigenic, antidiabetic, and antioxidative properties. Activation of platelets is associated with intravascular thrombosis and cardiovascular diseases. The present study examined the effects of amarogentin on platelet activation. Amarogentin treatment (15~60  μM) inhibited platelet aggregation induced by collagen, but not thrombin, arachidonic acid, and U46619. Amarogentin inhibited collagen-induced phosphorylation of phospholipase C (PLC) γ2, protein kinase C (PKC), and mitogen-activated protein kinases (MAPKs). It also inhibits in vivo thrombus formation in mice. In addition, neither the guanylate cyclase inhibitor ODQ nor the adenylate cyclase inhibitor SQ22536 affected the amarogentin-mediated inhibition of platelet aggregation, which suggests that amarogentin does not regulate the levels of cyclic AMP and cyclic GMP. In conclusion, amarogentin prevents platelet activation through the inhibition of PLC γ2-PKC cascade and MAPK pathway. Our findings suggest that amarogentin may offer therapeutic potential for preventing or treating thromboembolic disorders.

A pathological study on overexpression of c-fos and Rb proteins in human radiation skin ulcer

International Nuclear Information System (INIS)

Du Yuejiao; Wang Dewen; Gao Yabing

1996-01-01

We performed an immunohistochemical study on human radiation skin ulcer by using antibodies against c-fos and Rb proteins and antigen-repairing method with a microwave oven. We found that the positive rates of overexpression of c-fos and Rb proteins were 84.0% and 100%, respectively. The overexpression of c-fos protein was mainly observed in cell nuclei of squamous epithelial cells, fibroblasts, endothelial cells, and leiomyocytes in media and fibrocytes in adventitia of arterioles. The location of the Rb protein overexpression was mostly similar to that of c-fos protein. The overexpression of c-fos and Rb proteins may be related to cancer transformation and poor healing of radiation-induced skin ulcers

Thermodynamic studies of (RbF + RbCl + H2O) and (CsF + CsCl + H2O) ternary systems from potentiometric measurements at T = 298.2 K

International Nuclear Information System (INIS)

Huang, Xiaoting; Li, Shu’ni; Zhai, Quanguo; Jiang, Yucheng; Hu, Mancheng

2016-01-01

Graphical abstract: Thermodynamic properties, such as mean activity coefficients, osmotic coefficients and excess Gibbs free energies, of the RbF + RbCl + H 2 O and CsF + CsCl + H 2 O ternary systems were determined from potentiometric measurement at 298.2 K. The Pitzer model and the Harned rule were used to fit the experimental data. - Highlights: • Thermodynamic properties of RbF + RbCl + H 2 O and CsF + CsCl + H 2 O ternary systems were determined. • The Pitzer model and the Harned rule were used to correlate the experimental data. • The mean activity coefficients, osmotic coefficients, and the excess Gibbs free energy were also obtained. - Abstract: Thermodynamic properties of (RbF + RbCl + H 2 O) and (CsF + CsCl + H 2 O) systems were determined by the potentiometric method for different ionic strength fractions y B of RbCl/CsCl at 298.2 K. The Pitzer model and the Harned rule were used to fit the experimental values. The Pitzer mixing parameters and the Harned coefficients were evaluated. In addition, the mean ionic activity coefficients of RbF/CsF and RbCl/CsCl, the osmotic coefficients, and the excess Gibbs energies of the systems studied were calculated.

26 CFR 1.501(c)(21)-1 - Black lung trusts-certain terms.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 7 2010-04-01 2010-04-01 true Black lung trusts-certain terms. 1.501(c)(21)-1...) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Exempt Organizations § 1.501(c)(21)-1 Black lung trusts... insurer or guarantor of the liabilities of another. (c) Black Lung Acts. The term Black Lung Acts includes...

Investigation on ultracold RbCs molecules in (2)0{sup +} long-range state below the Rb(5S{sub 1/2}) + Cs(6P{sub 1/2}) asymptote by high resolution photoassociation spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Yuan, Jinpeng; Ji, Zhonghua; Li, Zhonghao; Zhao, Yanting, E-mail: zhaoyt@sxu.edu.cn; Xiao, Liantuan; Jia, Suotang [State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Shanxi University, Taiyuan 030006 (China)

2015-07-28

We present high resolution photoassociation spectroscopy of RbCs molecules in (2)0{sup +} long-range state below the Rb(5S{sub 1/2}) + Cs(6P{sub 1/2}) asymptote and derive the corresponding C{sub 6} coefficient, which is used to revise the potential energy curves. The excited state molecules are produced in a dual-species dark spontaneous force optical trap and detected by ionizing ground state molecules after spontaneous decay, using a high sensitive time-of-flight mass spectrum. With the help of resonance-enhanced two-photon ionization technique, we obtain considerable high resolution photoassociation spectrum with rovibrational states, some of which have never been observed before. By applying the LeRoy-Bernstein method, we assign the vibrational quantum numbers and deduce C{sub 6} coefficient, which agrees with the theoretical value of A{sup 1}Σ{sup +} state correlated to Rb(5S{sub 1/2}) + Cs(6P{sub 1/2}) asymptote. The obtained C{sub 6} coefficient is used to revise the long-range potential energy curve for (2)0{sup +} state, which possesses unique A − b mixing characteristic and can be a good candidate for the production of absolutely ground state molecule.

Rb-intercalated C{sub 60} compounds studied by photoemission spectroscopies

Energy Technology Data Exchange (ETDEWEB)

Brambilla, A [INFM - Dipartimento di Fisica, Politecnico di Milano, p.za L. da Vinci 32, I-20133 Milan (Italy); Giovanelli, L [Sincrotrone Trieste S.C.p.A., Strada Statale 14, Km 163.5, I-34012 Basovizza, Trieste (Italy); Vilmercati, P [Sincrotrone Trieste S.C.p.A., Strada Statale 14, Km 163.5, I-34012 Basovizza, Trieste (Italy); Cattoni, A [INFM - Dipartimento di Fisica, Politecnico di Milano, p.za L. da Vinci 32, I-20133 Milan (Italy); Biagioni, P [INFM - Dipartimento di Fisica, Politecnico di Milano, p.za L. da Vinci 32, I-20133 Milan (Italy); Goldoni, A [Sincrotrone Trieste S.C.p.A., Strada Statale 14, Km 163.5, I-34012 Basovizza, Trieste (Italy); Finazzi, M [INFM - Dipartimento di Fisica, Politecnico di Milano, p.za L. da Vinci 32, I-20133 Milan (Italy); Duo, L [INFM - Dipartimento di Fisica, Politecnico di Milano, p.za L. da Vinci 32, I-20133 Milan (Italy)

2005-06-15

We report on a combined photoemission and inverse photoemission spectroscopy analysis on Rb{sub x}C{sub 60} compounds with different stoichiometries (0-bar x-bar 6). Apart from shifts and broadening of the spectral features associated to the different phase formed, we observe in the RbC{sub 60} phase the presence of the highest occupied molecular orbital (HOMO) shoulder and of its symmetric (with respect to the Fermi level) empty state. According to calculations, the metallicity of this phase and the presence of these electronic states may be taken as a fingerprint of the interplay between electron-electron and electron-phonon interactions in determining the electronic behavior of alkali metal fullerides.

Phase formation in the Li2MoO4–Rb2MoO4–Fe2(MoO4)3 system and crystal structure of a novel triple molybdate LiRb2Fe(MoO4)3

International Nuclear Information System (INIS)

Khal'baeva, Klara M.; Solodovnikov, Sergey F.; Khaikina, Elena G.; Kadyrova, Yuliya M.; Solodovnikova, Zoya A.; Basovich, Olga M.

2013-01-01

X-ray investigation of solid state interaction of the components in the Li 2 MoO 4 –Rb 2 MoO 4 –Fe 2 (MoO 4 ) 3 system was carried out, and a subsolidus phase diagram of the said system was constructed. The subsystem Rb 2 MoO 4 –LiRbMoO 4 –RbFe(MoO 4 ) 2 was shown to be non-quasiternary. Formation of a novel triple molybdate LiRb 2 Fe(MoO 4 ) 3 was established, conditions of solid state synthesis and crystallization of the compound were found. Its crystal structure (orthorhombic, space group Pnma, Z=4, a=24.3956(6), b=5.8306(1), c=8.4368(2) Å) represents a new structure type and includes infinite two-row ribbons ([Fe(MoO 4 ) 3 ] 3− ) ∞ parallel to the b axis and composed of FeO 6 octahedra, terminal Mo(3)O 4 tetrahedra, and bridge Mo(1)O 4 and Mo(2)O 4 tetrahedra connecting two or three FeO 6 octahedra. The ribbons are connected to form 3D framework via corner-sharing LiO 4 tetrahedra. Rubidium cations are 11- and 13-coordinated and located in cavities of this heterogeneous polyhedral framework. - Graphical abstract: Exploring the Li 2 MoO 4 –Rb 2 MoO 4 –Fe 2 (MoO 4 ) 3 system showed its partial non-quasiternarity and revealed a new compound LiRb 2 Fe(MoO 4 ) 3 which was structurally studied. - Highlights: • The Li 2 MoO 4 –Rb 2 MoO 4 –Fe 2 (MoO 4 ) 3 system study revealed a new compound LiRb 2 Fe(MoO 4 ) 3 . • Its structure of a new type includes ribbons of FeO 6 octahedra and MoO 4 tetrahedra. • The ribbons are connected into a 3D framework via corner-sharing LiO 4 tetrahedra

39 CFR 211.1 - Disposition of former title 39, U.S.C.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Disposition of former title 39, U.S.C. 211.1... REGULATIONS § 211.1 Disposition of former title 39, U.S.C. Except as otherwise continued in effect as postal regulations, all provisions of former title 39, U.S.C., which were continued in effect as regulations of the...

Neutron scattering study of unstable magnetic long-range order in the random two-dimensional Ising antiferromagnets Rb/sub 2/Cosub(c)Mgsub(1-c)F/sub 4/

Energy Technology Data Exchange (ETDEWEB)

Ikeda, H; Suzuki, M [Ochanomizu Univ., Tokyo (Japan). Dept. of Physics; Hutchings, M T [UKAEA Atomic Energy Research Establishment, Harwell. Materials Physics Div.

1979-01-01

The spin correlation between two-dimensionally (2D) ordered antiferromagnetic layers in the random antiferromagnets Rb/sub 2/Cosub(c)Mgsub(1-c)F/sub 4/ depends strongly on the rate at which the sample is cooled through the Neel point Tsub(N) and decreases markedly with decreasing Co/sup 2 +/ ion concentration c. Preliminary data are presented which indicate that the order below sub(N) is metastable and relaxes to a fully correlated 3D ordered state on a finite, measurable, time-scale.

Topologically identical, but geometrically isomeric layers in hydrous α-, β-Rb[UO2(AsO3OH)(AsO2(OH)2)]·H2O and anhydrous Rb[UO2(AsO3OH)(AsO2(OH)2)

Science.gov (United States)

Yu, Na; Klepov, Vladislav V.; Villa, Eric M.; Bosbach, Dirk; Suleimanov, Evgeny V.; Depmeier, Wulf; Albrecht-Schmitt, Thomas E.; Alekseev, Evgeny V.

2014-07-01

The hydrothermal reaction of uranyl nitrate with rubidium nitrate and arsenic (III) oxide results in the formation of polymorphic α- and β-Rb[UO2(AsO3OH)(AsO2(OH)2)]·H2O (α-, β-RbUAs) and the anhydrous phase Rb[UO2(AsO3OH)(AsO2(OH)2)] (RbUAs). These phases were structurally, chemically and spectroscopically characterized. The structures of all three compounds are based upon topologically identical, but geometrically isomeric layers. The layers are linked with each other by means of the Rb cations and hydrogen bonding. Dehydration experiments demonstrate that water deintercalation from hydrous α- and β-RbUAs yields anhydrous RbUAs via topotactic reactions.

2-Methylpyridinium/pyridinium 5-(2,4-dinitrophenyl)-2,6-dioxo-1,2,3,6-tetrahydropyrimidin-4-olates as potent anticonvulsant agents—synthesis and crystal structure

Energy Technology Data Exchange (ETDEWEB)

Mangaiyarkarasi, G.; Kalaivani, D., E-mail: kalaivbalaj@yahoo.co.in [Affiliated to Bharathidasan University, Post Graduate and Research Department of Chemistry, Seethalakshmi Ramaswami College, Tiruchirappalli-620 002 (India)

2013-12-15

The molecular salt, 2-methylpyridinium 5-(2,4-dinitrophenyl)-2,6-dioxo-1,2,3,6-tetrahydropy-rimidin-4-olate) (I), is prepared from the ethanolic solution of 1-chloro-2,4-dinitrobenzene, pyrimidine-2,4,6-(1H,3H,5H)-trione (barbituric acid) and 2-methylpyridine at room temperature, and the molecular salt, pyridinium 5-(2,4-dinitrophenyl)-2,6-dioxo-1,2,3,6-tetrahydropyrimidin-4-olate (II), is prepared from the same reactants, by dissolving them in hot DMSO and ethanol mixture at 70°C. The structures of I and II are characterized by visible, IR, {sup 1}H-NMR, {sup 13}C-NMR and elemental analysis and confirmed by single crystal X-ray analysis. Both the salts crystallize in triclinic crystal system with sp. gr. P-bar1. They possess noticeable anticonvulsant activity even at low concentration (25 mg/kg). Acute toxicity studies of these complexes indicate that LD{sub 50} values are greater than 1500 mg/kg and the tested animals do not show any behavioural changes.

2-Methylpyridinium/pyridinium 5-(2,4-dinitrophenyl)-2,6-dioxo-1,2,3,6-tetrahydropyrimidin-4-olates as potent anticonvulsant agents—synthesis and crystal structure

International Nuclear Information System (INIS)

Mangaiyarkarasi, G.; Kalaivani, D.

2013-01-01

The molecular salt, 2-methylpyridinium 5-(2,4-dinitrophenyl)-2,6-dioxo-1,2,3,6-tetrahydropy-rimidin-4-olate) (I), is prepared from the ethanolic solution of 1-chloro-2,4-dinitrobenzene, pyrimidine-2,4,6-(1H,3H,5H)-trione (barbituric acid) and 2-methylpyridine at room temperature, and the molecular salt, pyridinium 5-(2,4-dinitrophenyl)-2,6-dioxo-1,2,3,6-tetrahydropyrimidin-4-olate (II), is prepared from the same reactants, by dissolving them in hot DMSO and ethanol mixture at 70°C. The structures of I and II are characterized by visible, IR, 1 H-NMR, 13 C-NMR and elemental analysis and confirmed by single crystal X-ray analysis. Both the salts crystallize in triclinic crystal system with sp. gr. P-bar1. They possess noticeable anticonvulsant activity even at low concentration (25 mg/kg). Acute toxicity studies of these complexes indicate that LD 50 values are greater than 1500 mg/kg and the tested animals do not show any behavioural changes

28 CFR 524.73 - Classification procedures.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Classification procedures. 524.73 Section 524.73 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INMATE ADMISSION, CLASSIFICATION, AND TRANSFER CLASSIFICATION OF INMATES Central Inmate Monitoring (CIM) System § 524.73...

Final report on the IAEA research contracts No. 1194/RB, 1194/R1/RB and 1194/R2/RB

International Nuclear Information System (INIS)

Zobor, E.; Janosy, J.S.; Szentgali, A.

1980-09-01

The final report summarizes the research activities made in the framework of the IAEA Research Contracts No. 1194/RB, 1194/R1/RB and 1194/R2/RB. A multilevel hierarchical control system is treated which uses weakly-coupled low dimensional subsystems under the supervision of a dynamic coordinator program. This self-organizing adaptive control system was checked by a 5 MW research reactor. As an example the paper describes the experimental computer control system of the 5 MW WWR-SM research reactor, where the reactor power and outlet temperature have been controlled on the basis of the treated control concept since 1978. (author)

Phase equilibrium in Rb2MoO4-AMoO4-Zr(MOO4)2 systems (A - bivalent elements)

International Nuclear Information System (INIS)

Ivanova, M.N.; Tsyrenova, G.D.; Bazarova, Zh.G.

1993-01-01

The Rb 2 MoO 4 -AMoO 4 -Zr(MoO 4 ) 2 systems, where A - bivalent elements, were investigated by solid phase reactions, x-ray and differntial thermal analysis methods. Formation of new ternary molybdates was determined. Phase relationships in the Rb 2 MoO 4 -MnMoO 4 -Zr(MoO 4 ) 2 system in subsolidus range (550 deg C) were studied using x-ray analysis data

28 CFR 524.75 - Periodic review.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Periodic review. 524.75 Section 524.75... TRANSFER CLASSIFICATION OF INMATES Central Inmate Monitoring (CIM) System § 524.75 Periodic review. The Warden shall ensure that the status of an inmate's CIM assignment is considered at each program review...

78 FR 36538 - 36(b)(1) Arms Sales Notification

Science.gov (United States)

2013-06-18

... Articles or Services under Consideration for Purchase: 2 C-130J-30 aircraft, 10 Rolls Royce AE 2100D3... be Paid: (vii) Sensitivity of Technology Contained in the Defense Article or Defense Services... establish a supply system in support of flight operations, supply management, inventory control, and...

Topologically identical, but geometrically isomeric layers in hydrous α-, β-Rb[UO2(AsO3OH)(AsO2(OH)2)]·H2O and anhydrous Rb[UO2(AsO3OH)(AsO2(OH)2)

International Nuclear Information System (INIS)

Yu, Na; Klepov, Vladislav V.; Villa, Eric M.; Bosbach, Dirk; Suleimanov, Evgeny V.; Depmeier, Wulf; Albrecht-Schmitt, Thomas E.; Alekseev, Evgeny V.

2014-01-01

The hydrothermal reaction of uranyl nitrate with rubidium nitrate and arsenic (III) oxide results in the formation of polymorphic α- and β-Rb[UO 2 (AsO 3 OH)(AsO 2 (OH) 2 )]·H 2 O (α-, β-RbUAs) and the anhydrous phase Rb[UO 2 (AsO 3 OH)(AsO 2 (OH) 2 )] (RbUAs). These phases were structurally, chemically and spectroscopically characterized. The structures of all three compounds are based upon topologically identical, but geometrically isomeric layers. The layers are linked with each other by means of the Rb cations and hydrogen bonding. Dehydration experiments demonstrate that water deintercalation from hydrous α- and β-RbUAs yields anhydrous RbUAs via topotactic reactions. - Graphical abstract: Three different layer geometries observed in the structures of Rb[UO 2 (AsO 3 OH)(AsO 2 (OH) 2 )] and α- and β- Rb[UO 2 (AsO 3 OH)(AsO 2 (OH) 2 )]·H 2 O. Two different coordination environments of uranium polyhedra (types I and II) are shown schematically on the top of the figure. - Highlights: • Three new uranyl arsenates were synthesized from the hydrothermal reactions. • The phases consist of the topologically identical but geometrically different layers. • Topotactic transitions were observed in the processes of mono-hyrates dehydration

On thermal expansion of RbD2PO4, CsH2PO4 and CsDrPO4 crystals

International Nuclear Information System (INIS)

Vlokh, O.G.; Shchur, Ya.I.; Klymiv, I.M.

1994-01-01

Thermal expansion of RbD 2 PO 4 , CsH 2 PO 4 , CsD 2 PO 4 crystals in a wide range of temperatures embracing points of phase transitions was studied. An explanation of anomalous behaviour of thermal expansion factor along directions b and c in the course of RbD 2 PO 4 transfer into intermediate phase was suggested. 10 refs., 4 figs

Úzkopásmová PLC komunikace pro Smart Metering

OpenAIRE

Kubů, Jiří

2016-01-01

Tato bakalářská práce se zabývá úzkopásmovou PLC komunikací. V práci je popsán základní princip, rozdělení PLC komunikace, historie technologie, využívané komunikační standardy a rušení ovlivňující datovou komunikaci této technologie. V rámci této práce byly provedeny i experimentální měření v reálném prostředí s modemy od firmy Texas Instruments C2000 PLC TMDSPLCKITV4 a C2000 PLC TMDSPLCKIT-V3. Výsledky tohoto měření jsou reálné přenosové rychlosti. Dále byla vytvořena aplikace pro dálkový s...

Pressurisation of IP-SOFC technology for second generation hybrid application

Energy Technology Data Exchange (ETDEWEB)

Jones, L.

2005-07-01

The Integrated Planar Solid Oxide Fuel Cell (IP-SOFC) technology developed by Rolls-Royce plc is a hybrid fuel cell technology considered highly suitable for the distributed power generation market. This report presents the results of a project to examine the technical viability of the IP-SOFC technology and some of the associated hybrid system component technologies under pressurised conditions and to investigate the validity of the predicted pressurisation phenomena. The work included: identification of critical material specifications, construction processes, control parameters, etc; the design and commissioning of two pressurised IP-SOFC test rigs at Rolls Royce in Derby; testing two multi-bundle strips at high temperature and atmospheric pressure; testing an active IP-SOFC bundle at high temperature and pressure; testing an experimental steam reforming unit at high temperature and pressure; testing a novel low pressure drop, off-gas combustor concept under atmospheric and pressurised conditions; design studies to identify key parameters affecting the successful integration and packaging of the fuel cell stack with certain associated hybrid components; and designing a hybrid system experimental verification rig. Significant progress was made in addressing the development challenges associated with the IP-SOFC of leakage, performance, durability, yield and geometry, the reaction rate of steam reforming and emissions from the off-gas combustor. Recommendations for future work are made.

Carbonate hydrates of the heavy alkali metals: preparation and structure of Rb{sub 2}CO{sub 3} . 1.5 H{sub 2}O und Cs{sub 2}CO{sub 3} . 3 H{sub 2}O; Carbonat-Hydrate der schweren Alkalimetalle: Darstellung und Struktur von Rb{sub 2}CO{sub 3} . 1,5 H{sub 2}O und Cs{sub 2}CO{sub 3} . 3 H{sub 2}O

Energy Technology Data Exchange (ETDEWEB)

Cirpus, V.; Wittrock, J.; Adam, A. [Koeln Univ. (Germany). Inst. fuer Anorganische Chemie

2001-03-01

Rb{sub 2}CO{sub 3} . 1.5 H{sub 2}O and Cs{sub 2}CO{sub 3} . 3 H{sub 2}O were prepared from aqueous solution and by means of the reaction of dialkylcarbonates with RbOH and CsOH resp. in hydrous alcoholes. Based on four-circle diffractometer data, the crystal structures were determined (Rb{sub 2}CO{sub 3} . 1.5 H{sub 2}O: C2/c (no. 15), Z = 8, a = 1237.7(2) pm, b = 1385.94(7) pm, c = 747.7(4) pm, {beta} = 120.133(8) , V{sub EZ} = 1109.3(6) . 10{sup 6} pm{sup 3}; Cs{sub 2}CO{sub 3} . 3 H{sub 2}O: P2/c (no. 13), Z = 2, a = 654.5(2) pm, b = 679.06(6) pm, c = 886.4(2) pm, {beta} = 90.708(14) , V{sub EZ} = 393.9(2) . 10{sup 6} pm{sup 3}). Rb{sub 2}CO{sub 3} . 1.5 H{sub 2}O is isostructural with K{sub 2}CO{sub 3} . 1.5 H{sub 2}O. In case of Cs{sub 2}CO{sub 3} . 3 H{sub 2}O no comparable structure is known. Both structures show {sub {infinity}}{sup 1}[(CO{sub 3}{sup 2-})(H{sub 2}O)]-chains, being connected via additional H{sub 2}O forming columns (Rb{sub 2}CO{sub 3} . 1.5 H{sub 2}O) and layers (Cs{sub 2}CO{sub 3} . 3 H{sub 2}O), respectively. (orig.)

Promoting Ti{sub 4}C{sub 2}S{sub 2} strain induced precipitation during asymmetrical hot rolling to improve r value and advantaged texture in Ti stabilized IF steel

Energy Technology Data Exchange (ETDEWEB)

Dong, Futao, E-mail: dongft@sina.com [College of Metallurgy and Energy, Hebei United University, Tangshan 063000 (China); Xue, Fei [College of Electrical Engineering, Hebei United University, Tangshan 063000 (China); Du, Linxiu; Liu, Xianghua [The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819 (China)

2015-01-25

Highlights: • We study Ti{sub 4}C{sub 2}S{sub 2} strain induced precipitation in Ti stabilized IF steel. • The PTT diagram is obtained by plotting 1/A{sub r}–time curves. • Hot rolling at the nose of P{sub s} line effectively promotes Ti{sub 4}C{sub 2}S{sub 2} precipitation. • Annealed sheet with promoted Ti{sub 4}C{sub 2}S{sub 2} exhibits higher r value and stronger γ fiber texture. • Adverse impact of tiny TiC has been significantly mitigated. - Abstract: The kinetic of Ti{sub 4}C{sub 2}S{sub 2} strain induced precipitation in a Ti stabilized IF steel was investigated using two stage interrupted compression test with high true strain (0.5). The PTT (precipitation–time–temperature) diagram was obtained by plotting 1/A{sub r}–time curves. TEM (transmission electron microscopy) observation confirmed that the evolution of Ti{sub 4}C{sub 2}S{sub 2} precipitate in the quenched samples of thermal simulation is in good agreement with the PTT diagram. Hot strips were produced at three different rolling temperatures with high strain and slight shear deformation. It was found that hot rolling at the nose temperature of the P{sub s} line of the PTT diagram can effectively promote the precipitation of Ti{sub 4}C{sub 2}S{sub 2} and retard the precipitation of TiC. Cold rolled and annealed sheets from hot strip containing higher volume fraction of Ti{sub 4}C{sub 2}S{sub 2} exhibited higher r value and stronger γ fiber texture with equal {1 1 1}〈1 1 2〉 and {1 1 1}〈1 1 0〉 components. By contrast, cold rolled and annealed sheets from hot strips containing lower volume fraction of Ti{sub 4}C{sub 2}S{sub 2} represented lower r values and weaker γ fiber texture with significant drops from {1 1 1}〈1 1 2〉 to {1 1 1}〈1 1 0〉 component.

70Z/3 Cbl induces PLC gamma 1 activation in T lymphocytes via an alternate Lat- and Slp-76-independent signaling mechanism.

Science.gov (United States)

Graham, Laurie J; Verí, Maria-Concetta; DeBell, Karen E; Noviello, Cristiana; Rawat, Rashmi; Jen, Sandy; Bonvini, Ezio; Rellahan, Barbara

2003-04-24

The oncoprotein 70Z/3 Cbl signals in an autonomous fashion or through blockade of endogenous c-Cbl, a negative regulator of signaling. The mechanism of 70Z/3 Cbl-induced signaling was investigated by comparing the molecular requirements for 70Z/3 Cbl- and TCR-induced phospholipase C gamma 1 (PLC gamma 1) activation. 70Z/3 Cbl-induced PLC gamma 1 tyrosine phosphorylation required, in addition to the PLC gamma 1 N-terminal SH2 domain, the C-terminal SH2 and SH3 domains that were dispensable for TCR-induced phosphorylation. Deletion of the leucine zipper of 70Z/3 Cbl did not eliminate 70Z/3 Cbl-induced PLC gamma 1 phosphorylation, suggesting that blockage of c-Cbl via dimerization with 70Z/3 Cbl cannot fully explain 70Z/3 Cbl activating characteristics. The complete elimination of PLC gamma 1 phosphorylation required deleting the SH3 domain-binding region of 70Z/3 Cbl, consistent with 70Z/3 Cbl binding the PLC gamma 1 SH3 domain. 70Z/3 Cbl-induced PLC gamma 1 phosphorylation required Zap-70, as for the TCR, and the tyrosine kinase binding domain of 70Z/3 Cbl, which binds Zap-70, but did not require PLC gamma 1 binding to Lat, a crucial interaction in TCR-induced PLC gamma 1 phosphorylation. Furthermore, 70Z/3 Cbl-induced activation of NFAT, a PLC gamma 1/Ca(2+)-dependent transcriptional event, required Zap-70, but was independent of Slp-76, an adapter required for TCR-induced NFAT activation. These results suggest that 70Z/3 Cbl and PLC gamma 1 form a TCR-, Lat- and Slp-76-independent complex that leads to PLC gamma 1 phosphorylation and activation.

A66G and C524T polymorphisms of methionine synthase reductase gene are linked to the development of acyanotic congenital heart diseases in Egyptian children.

Science.gov (United States)

Hassan, Fahima M; Khattab, Ahmad A; Abo El Fotoh, Wafaa Moustafa M; Zidan, Reham S

2017-09-20

Methionine synthase reductase (MTRR) is one of the main regulatory enzymes in the homocysteine/folate pathway. Genes involved in this pathway may play an important role in the development of congenital heart diseases (CHDs). C524T and A66G polymorphisms of MTRR gene may play an imperative role in the development of acyanotic CHDs. This study carried out on 200 children equally divided into 2 groups: group I: 100 children with acyanotic CHDs; and group II: 100 healthy children served as controls. PCR-RFLP method carried out to amplify the A66G and C524T polymorphisms of MTRR gene digested with Xho1and NdeI enzymes. A significant difference(P=0.015) in genotype frequencies of C524T polymorphism between cases and controls, where CC, CT, and TT were 14.0%, 40.0% and 46.0% in patients compared to 38.0,36.0% and 26.0% in controls. Again, a significant difference (P=0.010) in genotype frequencies of A66G polymorphism between the two groups as AA, AG and GG were 26.0%, 32.0% and42.0% in patients compared to 48.0, 36.0% and 16.0% in controls. Also, MTRR A66G and C524T polymorphisms were associated with a higher CHD risk in the homozygote comparison of wild and mutant genotypes and also in heterozygote and mutant comparison. So A66G and C524T polymorphisms of MTRR gene are associated with increased risk of acyanotic CHDs. Copyright © 2017 Elsevier B.V. All rights reserved.

Synthesis and properties of Rb2GeF6:Mn4+ red-emitting phosphors

Science.gov (United States)

Sakurai, Shono; Nakamura, Toshihiro; Adachi, Sadao

2018-02-01

Rb2GeF6:Mn4+ red-emitting phosphors were synthesized by coprecipitation and their structural and optical properties were investigated by laser microscopy observation, X-ray diffraction (XRD) analysis, photoluminescence (PL) analysis, PL excitation (PLE) spectroscopy, and PL decay measurement. Single-crystalline ingots in the form of a hexagonal pyramid were prepared with a basal plane diameter of ˜2 mm. The XRD analysis suggested that Rb2GeF6 crystallizes in the hexagonal structure (C6v4 = P63mc) with a = 0.5955 nm and c = 0.9672 nm. The phosphor exhibited the strong Mn4+-related zero-phonon line (ZPL) emission peak typically observed in host crystals with piezoelectrically active lattices such as a hexagonal lattice. The quantum efficiencies of the bulk ingot and powdered samples were 87 and 74%, respectively, with nearly the same luminescence decay time of ˜6 ms. The exact ZPL energies and related crystal-field and Racah parameters were obtained from the PL and PLE spectra by Franck-Condon analysis. Temperature-dependent PL intensities were analyzed from T = 20 to 500 K using a thermal quenching model by considering Bose-Einstein phonon statistics. A comparative discussion on the phosphor properties of Rb2GeF6:Mn4+ and Rb2MF6:Mn4+ with M = Si and Ti was also given.

The RB/E2F pathway and regulation of RNA processing

Energy Technology Data Exchange (ETDEWEB)

Ahlander, Joseph [Department of Molecular and Cellular Biology, 1007 East Lowell Street, University of Arizona, Tucson, AZ 85721 (United States); Bosco, Giovanni, E-mail: gbosco@email.arizona.edu [Department of Molecular and Cellular Biology, 1007 East Lowell Street, University of Arizona, Tucson, AZ 85721 (United States)

2009-07-03

The retinoblastoma tumor suppressor protein (RB) is inactivated in a majority of cancers. RB restricts cell proliferation by inhibiting the E2F family of transcription factors. The current model for RB/E2F function describes its role in regulating transcription at gene promoters. Whether the RB or E2F proteins might play a role in gene expression beyond transcription initiation is not well known. This review describes evidence that points to a novel role for the RB/E2F network in the regulation of RNA processing, and we propose a model as a framework for future research. The elucidation of a novel role of RB in RNA processing will have a profound impact on our understanding of the role of this tumor suppressor family in cell and developmental biology.

Parallel beam powder diffraction study on the A1C60 system (A=K, Rb)

International Nuclear Information System (INIS)

Faigel, G.; Tegze, M.; Bortel, G.; Forro, L.; Oszlanyi, G.; Stephens, P.W.

1994-01-01

We report x-ray powder diffraction studies on Rb x C 60 and K x C 60 . It is shown that at room temperature there exist stoichiometric compounds in the Rb x C 60 and K x C 60 systems at the x = 1 composition. Their equilibrium structures are pseudo body centered orthorhombic. The C 60 -C 60 intermolecular separation (9.1 A) is the shortest among the known alkali-fullerides. A first order phase transition is observed at about 380 K from the high temperature fcc phase to the room temperature orthorhombic phase. (orig.)

One-dimensional zinc selenophosphates: A{sub 2}ZnP{sub 2}Se{sub 6} (A = K, Rb, Cs)

Energy Technology Data Exchange (ETDEWEB)

Haynes, Alyssa S.; Lee, Katherine; Kanatzidis, Mercouri G. [Department of Chemistry, Northwestern University, Evanston, IL (United States)

2016-09-15

The new compounds A{sub 2}ZnP{sub 2}Se{sub 6} (A = K, Rb, Cs) were synthesized via molten salt flux syntheses. The crystals feature one-dimensional {sup 1}/{sub ∞}[ZnP{sub 2}Se{sub 6}]{sup 2-} chains charge balanced by alkali metal ions between the chains. K{sub 2}ZnP{sub 2}Se{sub 6} crystallizes in the monoclinic space group P2{sub 1}/c; cell parameters a = 12.537(3) Aa, b = 7.2742(14) Aa, c = 14.164(3) Aa, β = 109.63(3) , Z = 4, and V = 1216.7(4) Aa{sup 3}. Rb{sub 2}ZnP{sub 2}Se{sub 6} and Cs{sub 2}ZnP{sub 2}Se{sub 6} are isotypic, crystallizing in the triclinic space group P anti 1. Rb{sub 2}ZnP{sub 2}Se{sub 6} has cell parameters of a = 7.4944(15) Aa, b = 7.6013(15) Aa, c = 12.729(3) Aa, α = 96.57(3) , β = 105.52(3) , γ = 110.54(3) , Z = 2, and V = 636.6(2) Aa{sup 3}. Cs{sub 2}ZnP{sub 2}Se{sub 6} has cell parameters of a = 7.6543(6) Aa, b = 7.7006(6) Aa, c = 12.7373(11) Aa, α = 97.007(7) , β = 104.335(7) , γ = 109.241(6) , Z = 2, and V = 669.54(10) Aa{sup 3}. (Copyright copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

28 CFR 524.10 - Purpose.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Purpose. 524.10 Section 524.10 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INMATE ADMISSION, CLASSIFICATION, AND TRANSFER... subpart is to explain the Bureau of Prisons (Bureau) process for classifying newly committed inmates and...

Programmable logic controller (PLC) for safety systems of nuclear plants

International Nuclear Information System (INIS)

Sen, S.K.; Karmakar, G.; Joseph, Jose; Patil, R.K.

2002-01-01

Full text: A programmable logic controller (PLC) has been developed by RCnD, BARC for use in the safety critical systems in nuclear power plants. This PLC uses qualified hardware developed in RCnD for use in NPP. The programming software conforms to IEC-61131 part 3. The application programming is done on function block diagram (FBD) editor and the FBD is automatically converted into code in high level language (C / C++). This feature makes the application easily decipherable and therefore easily subjected to reviews and other validation techniques. The key to make quality software for use in nuclear systems is to enforce various standards in the design and development of the software, something, which is not possible to do with a commercially available PLC. This PLC with its software completely transparent lends itself to rigorous verification and validation easily

Webová aplikace v PLC PFC200

OpenAIRE

Michalík, David

2017-01-01

Tato bakalářská práce se věnuje implementaci vlastního způsobu ovládání vstupů, výstupů a paměti PLC PFC200 od firmy WAGO pomocí dynamického webového rozhraní. Součástí práce je popis PLC, způsobů jeho ovládání, rešerše volně dostupných webových serverů pro Linux a popis metod pro vytvoření real-time ovládání. Výstupem je webová aplikace běžící na webovém serveru v PLC, využívající vlastní runtime systém formou daemon programů. This bachelor’s thesis is mainly focused on implementation of ...

Phase formation in the Li2MoO4-Rb2MoO4-Ln2(MoO4)3 systems and the properties of LiRbLn2(MoO4)4

International Nuclear Information System (INIS)

Basovich, O.M.; Khajkina, E.G.; Vasil'ev, E.V.; Frolov, A.M.

1995-01-01

Phase equilibria within subsolidus range of ternary salt systems Li 2 MoO 4 -Rb 2 MoO 4 -Ln 2 (MoO 4 ) 4 (Ln - Nd, Er) are analyzed. Formation of ternary molybdate LiRbNd 2 (MoO 4 ) 4 is proved along LiNd(MoO 4 ) 2 -RbNd(MoO 4 )-2 cross-section. Phase diagram of this cross-section is plotted. Similar compounds are synthesized for Ln = La-Eu. The parameters of their monoclinic elementary cells are determined. Luminescent properties of LiRbLa 2 (MoO 4 ) 4 -Nd 3+ are studied. 17 refs., 4 figs., 2 tabs

Studies of inelastic cross-section in Rb(7S) + Rb(5S) collisions

International Nuclear Information System (INIS)

Caiyan, L.; Ekers, A.; Latvia Univ., Riga; Klavins, J.; Jansons, M.

1996-01-01

The cross section σ = (8 ± 4) x 10 -15 cm 2 was determined for the Rb(7S) + Rb(5S) → Rb(5D) + Rb(5S) excitation energy transfer process, and the quenching cross section σ q = (2 ± 1) x 10 -14 cm 2 for the Rb(5D) state in collisions with ground state Rb atoms. Applying rubidium quasimolecular asymptotic potential curves at relatively large internuclear distances, a qualitative interpretation of the experimental results is presented. It is shown that the quenching of the Rb(5D) atoms in collisions may be explained by a reversed energy pooling process Rb(5D) + Rb(5S) → Rb(5P) + Rb(5P). (orig.)

39 CFR 211.2 - Regulations of the Postal Service.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Regulations of the Postal Service. 211.2 Section 211.2 Postal Service UNITED STATES POSTAL SERVICE ORGANIZATION AND ADMINISTRATION APPLICATION OF REGULATIONS § 211.2 Regulations of the Postal Service. (a) The regulations of the Postal Service consist of...

7 CFR 2.11 - New principles and periodic reviews.

Science.gov (United States)

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false New principles and periodic reviews. 2.11 Section 2.11... Agriculture § 2.11 New principles and periodic reviews. In the exercise of authority delegated by the Secretary, the application of new principles of major importance or a departure from principles established...

Troubled Diversities, Multiple Identities and the Relevance of Royce: What Makes a Community Worth Caring about?

Science.gov (United States)

Raposa, Michael

2012-01-01

This article raises questions about what it means to be a diverse academic community and about why such diversity is worth struggling to achieve. The controversial arguments of Walter Benn Michaels are critically examined as a stimulus and prelude to considering the more constructive perspectives supplied by Amartya Sen and Josiah Royce. Royce's…

Presenilin dependence of phospholipase C and protein kinase C signaling

DEFF Research Database (Denmark)

Dehvari, Nodi; Cedazo-Minguez, Angel; Isacsson, Ola

2007-01-01

-stimulated phospholipase C (PLC) activity which was gamma-secretase dependent. To further evaluate the dependence of PLC on PSs we measured PLC activity and the activation of variant protein kinase C (PKC) isoforms in mouse embryonic fibroblasts (MEFs) lacking either PS1, PS2, or both. PLC activity and PKCalpha...

Temperature-dependent evolution of RbBSi2O6 glass into crystalline Rb-boroleucite according to X-ray diffraction data

International Nuclear Information System (INIS)

Levin, Aleksandr A.; Filatov, Stanislav K.; Krzhizhanovskaya, Maria G.; Paufler, Peter; Bubnova, Rimma S.; Russian Academy of Sciences, St. Petersburg; Meyer, Dirk C.; Technische Univ. Bergakademie Freiberg

2013-01-01

The temperature-dependent evolution of the glass into a crystalline phase is studied for a rubidium borosilicate glass of composition 16.7 Rb 2 O . 16.7 B 2 O 3 . 66.6 SiO 2 employing X-ray diffraction (XRD) data. A glass sample was prepared by melt quenching from 1500 within 0.5 hour. The glass sample was step-wise annealed at 13 distinct temperatures from 300 C up to 900 C for 1 h at every annealing step. To investigate changes in the glass structure, angle-dispersive XRD was applied by using an energy-resolving semiconductor detector. The radial distribution functions (RDFs) were calculated at every stage. For polycrystalline states the crystal structure of the samples with different thermal history was refined using the Rietveld method. Comparing correlation distances estimated from RDFs of glass and polycrystalline samples and mean interatomic distances calculated for polycrystalline samples by using atomic coordinates after Rietveld refinement, it is concluded that the borosilicate glass under study is converted into the crystalline state in the temperature range of 625-750 C (i.e. in the temperature range close to the glass transition range 620-695 C as determined by differential scanning calorimetry by using of heating rate of 20 K/min) at an average heating rate of about 0.35 K/min. When the heating rate is increased up to 10 or 20 K/min, the crystallisation temperature shifts sharply up to 831-900 C and 878-951 C, respectively. XRD data give evidence that distinctive traces of cubic RbBSi 2 O 6 appear from glass at about 625 C and a two-phase range exists up to 750 C. After annealing at higher temperatures (800-900 C) the crystal structure practically does not change any more. (orig.)

Silencing of RB1 and RB2/P130 during adipogenesis of bone marrow stromal cells results in dysregulated differentiation.

Science.gov (United States)

Capasso, Stefania; Alessio, Nicola; Di Bernardo, Giovanni; Cipollaro, Marilena; Melone, Mariarosa Ab; Peluso, Gianfranco; Giordano, Antonio; Galderisi, Umberto

2014-01-01

Bone marrow adipose tissue (BMAT) is different from fat found elsewhere in the body, and only recently have some of its functions been investigated. BMAT may regulate bone marrow stem cell niche and plays a role in energy storage and thermogenesis. BMAT may be involved also in obesity and osteoporosis onset. Given the paramount functions of BMAT, we decided to better clarify the human bone marrow adipogenesis by analyzing the role of the retinoblastoma gene family, which are key players in cell cycle regulation. Our data provide evidence that the inactivation of RB1 or RB2/P130 in uncommitted bone marrow stromal cells (BMSC) facilitates the first steps of adipogenesis. In cultures with silenced RB1 or RB2/P130, we observed an increase of clones with adipogenic potential and a higher percentage of cells accumulating lipid droplets. Nevertheless, the absence of RB1 or RB2/P130 impaired the terminal adipocyte differentiation and gave rise to dysregulated adipose cells, with alteration in lipid uptake and release. For the first time, we evidenced that RB2/P130 plays a role in bone marrow adipogenesis. Our data suggest that while the inactivation of retinoblastoma proteins may delay the onset of last cell division and allow more BMSC to be committed to adipocyte, it did not allow a permanent cell cycle exit, which is a prerequisite for adipocyte terminal maturation.

Preparation of minor ginsenosides C-Mc, C-Y, F2, and C-K from American ginseng PPD-ginsenoside using special ginsenosidase type-I from Aspergillus niger g.848.

Science.gov (United States)

Liu, Chun-Ying; Zhou, Rui-Xin; Sun, Chang-Kai; Jin, Ying-Hua; Yu, Hong-Shan; Zhang, Tian-Yang; Xu, Long-Quan; Jin, Feng-Xie

2015-07-01

Minor ginsenosides, those having low content in ginseng, have higher pharmacological activities. To obtain minor ginsenosides, the biotransformation of American ginseng protopanaxadiol (PPD)-ginsenoside was studied using special ginsenosidase type-I from Aspergillus niger g.848. DEAE (diethylaminoethyl)-cellulose and polyacrylamide gel electrophoresis were used in enzyme purification, thin-layer chromatography and high performance liquid chromatography (HPLC) were used in enzyme hydrolysis and kinetics; crude enzyme was used in minor ginsenoside preparation from PPD-ginsenoside; the products were separated with silica-gel-column, and recognized by HPLC and NMR (Nuclear Magnetic Resonance). The enzyme molecular weight was 75 kDa; the enzyme firstly hydrolyzed the C-20 position 20-O-β-D-Glc of ginsenoside Rb1, then the C-3 position 3-O-β-D-Glc with the pathway Rb1→Rd→F2→C-K. However, the enzyme firstly hydrolyzed C-3 position 3-O-β-D-Glc of ginsenoside Rb2 and Rc, finally hydrolyzed 20-O-L-Ara with the pathway Rb2→C-O→C-Y→C-K, and Rc→C-Mc1→C-Mc→C-K. According to enzyme kinetics, K m and V max of Michaelis-Menten equation, the enzyme reaction velocities on ginsenosides were Rb1 > Rb2 > Rc > Rd. However, the pure enzyme yield was only 3.1%, so crude enzyme was used for minor ginsenoside preparation. When the crude enzyme was reacted in 3% American ginseng PPD-ginsenoside (containing Rb1, Rb2, Rc, and Rd) at 45°C and pH 5.0 for 18 h, the main products were minor ginsenosides C-Mc, C-Y, F2, and C-K; average molar yields were 43.7% for C-Mc from Rc, 42.4% for C-Y from Rb2, and 69.5% for F2 and C-K from Rb1 and Rd. Four monomer minor ginsenosides were successfully produced (at low-cost) from the PPD-ginsenosides using crude enzyme.

Optical conductivity in A3C60 (A=K, Rb)

NARCIS (Netherlands)

Brink, J. van den; Gunnarsson, O.; Eyert, V.

1997-01-01

Published in: Phys. Rev. B 57 (1998) 2163-2167 Citing articles (CrossRef) citations recorded in [Science Citation Index] Abstract: We study the optical conductivity in A3C60 (A =K, Rb). The effects of the electron-phonon interaction is included to lowest order in the coupling strength lambda. It is

The Understanding of Loyalty in J. Royce and The Role of Loyalty in Overcoming The Evil

Directory of Open Access Journals (Sweden)

Emel Koç

2011-06-01

Full Text Available Stating that no philosophical issue is more discouraging than misstatement of the problem of evil in theory, Josiah Royce focused his attention on the problem of evil in accordance with the overall trend of philosophy in the 18th and 19th centuries. The most striking characteristic of Royce‟s approach to problem of evil is that he considered a loyalty-based moral perception to overcome this problem. Approaching the problem of evil through an existentialist perspective rather than a rational point of view and underlining that the problem of evil can only be addressed responsibly through experiencing it in practice, Royce emphasized a collective will and responsibility, which for Royce needs to be produced through loyalty, in fighting the evil

Parathyroid Hormone Activates Phospholipase C (PLC)-Independent Protein Kinase C Signaling Pathway via Protein Kinase A (PKA)-Dependent Mechanism: A New Defined Signaling Route Would Induce Alternative Consideration to Previous Conceptions.

Science.gov (United States)

Tong, Guojun; Meng, Yue; Hao, Song; Hu, Shaoyu; He, Youhua; Yan, Wenjuan; Yang, Dehong

2017-04-20

BACKGROUND Parathyroid hormone (PTH) is an effective anti-osteoporosis agent, after binding to its receptor PTHR1, several signaling pathways, including cAMP/protein kinase A (PKA) and phospholipase C (PLC)/protein kinase C (PKC), are initiated through G proteins; with the cAMP/PKA pathway as the major pathway. Earlier studies have reported that PTHR1 might also activate PKC via a PLC-independent mechanism, but this pathway remains unclear. MATERIAL AND METHODS In HEK293 cells, cAMP accumulation was measured with ELISA and PKC was measured with fluorescence resonance energy transfer (FRET) analysis using CKAR plasmid. In MC3T3-E1 cells, real-time PCR was performed to examine gene expressions. Then assays for cell apoptosis, cell differentiation, alkaline phosphatase activity, and mineralization were performed. RESULTS The FRET analysis found that PTH(1-34), [G1,R19]PTH(1-34) (GR(1-34), and [G1,R19]PTH(1-28) (GR(1-28) were all activated by PKC. The PKC activation ability of GR(1-28) was blocked by cAMP inhibitor (Rp-cAMP) and rescued with the addition of active PKA-α and PKA-β. The PKC activation ability of GR(1-34) was partially inhibited by Rp-cAMP. In MC3T3-E1 cells, gene expressions of ALP, CITED1, NR4a2, and OSX that was regulated by GR(1-28) were significantly changed by the pan-PKC inhibitor Go6983. After pretreatment with Rp-cAMP, the gene expressions of ALP, CITED1, and OPG were differentially regulated by GR(1-28) or GR(1-34), and the difference was blunted by Go6983. PTH(1-34), GR(1-28), and GR(1-34) significantly decreased early apoptosis and augmented osteoblastic differentiation in accordance with the activities of PKA and PKC. CONCLUSIONS PLC-independent PKC activation induced by PTH could be divided into two potential mechanisms: one was PKA-dependent and associated with PTH(1-28); the other was PKA-independent and associated with PTH(29-34). We also found that PTH could activate PLC-independent PKC via PKA-dependent mechanisms.

Connecting programmable logic controllers (PLC) to control and data acquisition a comparison of the JET and Wendelstein 7-X approach

International Nuclear Information System (INIS)

Hennig, Christine; Kneupner, Klaus; Kinna, David

2012-01-01

Highlights: ► We describe 2 ways connecting PLCs to fusion control and data acquisition software. ► At W7-X standardization of the PLC type eases the maintenance of the software. ► At JET PLCs are interfaced with a daemon that hides the PLC specific part. ► There is potential to unify the approaches towards a common fusion PLC interface. - Abstract: The use of programmable logic controllers (PLC) for automation of electromechanical processes is an industrial control system technology. It is more and more in use within the fusion community. Traditionally PLC based systems are operated and maintained using proprietary SCADA systems (supervisory control and data acquisition). They are hardly ever integrated with the fusion control and data acquisition systems. An overview of the state of the art in fusion is given in the article. At JET an inhouse “black box protocol” approach has been developed to communicate with any external system via a dedicated http based protocol. However, a PLC usually cannot be modified to implement this special protocol. Hence, a software layer has been developed that interfaces a PLC by implementing the PLC specific communication part on one side and the black box protocol part on the other side. The software is completely data driven i.e. editing the data structure changes the logic accordingly. It can be tested using the web capability of the black box protocol. Multiple PLC types from different vendors are supported, thus multiple protocols to interface the PLC are in use. Depending on the PLC type and available tools it can be necessary to program the PLC accordingly. Wendelstein 7-X uses another approach. For every single PLC a dedicated communication from and to CoDaC is implemented. This communication is projected (programmed) in the PLC and configurable (data driven) on the CoDaC side. The protocol is UDP based and observed via timeout mechanisms. The use of PLCs for Wendelstein 7-X is standardized. Therefore a single

Connecting programmable logic controllers (PLC) to control and data acquisition a comparison of the JET and Wendelstein 7-X approach

Energy Technology Data Exchange (ETDEWEB)

Hennig, Christine, E-mail: Christine.Hennig@ipp.mpg.de [Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald (Germany); Kneupner, Klaus; Kinna, David [JET-EFDA, Culham Science Centre, OX14 3DB Abingdon (United Kingdom)

2012-12-15

Highlights: Black-Right-Pointing-Pointer We describe 2 ways connecting PLCs to fusion control and data acquisition software. Black-Right-Pointing-Pointer At W7-X standardization of the PLC type eases the maintenance of the software. Black-Right-Pointing-Pointer At JET PLCs are interfaced with a daemon that hides the PLC specific part. Black-Right-Pointing-Pointer There is potential to unify the approaches towards a common fusion PLC interface. - Abstract: The use of programmable logic controllers (PLC) for automation of electromechanical processes is an industrial control system technology. It is more and more in use within the fusion community. Traditionally PLC based systems are operated and maintained using proprietary SCADA systems (supervisory control and data acquisition). They are hardly ever integrated with the fusion control and data acquisition systems. An overview of the state of the art in fusion is given in the article. At JET an inhouse 'black box protocol' approach has been developed to communicate with any external system via a dedicated http based protocol. However, a PLC usually cannot be modified to implement this special protocol. Hence, a software layer has been developed that interfaces a PLC by implementing the PLC specific communication part on one side and the black box protocol part on the other side. The software is completely data driven i.e. editing the data structure changes the logic accordingly. It can be tested using the web capability of the black box protocol. Multiple PLC types from different vendors are supported, thus multiple protocols to interface the PLC are in use. Depending on the PLC type and available tools it can be necessary to program the PLC accordingly. Wendelstein 7-X uses another approach. For every single PLC a dedicated communication from and to CoDaC is implemented. This communication is projected (programmed) in the PLC and configurable (data driven) on the CoDaC side. The protocol is UDP based and

NaPdPS{sub 4} and RbPdPS{sub 4}: systems with infinite straight ((1)/({infinity}))[PdPS{sub 4}]{sup -} chains soluble in polar solvents and the structure of cubic RbPdPS{sub 4}{l_brace}Rb{sub 0.33}P{sub 0.4}S{sub 2.23}O{sub x}{r_brace}

Energy Technology Data Exchange (ETDEWEB)

Coste, Servane; Hanko, Jason; Bujoli-Doeuff, Martine; Louarn, Guy; Evain, Michel; Brec, Raymond; Alonso, Bruno; Jobic, S; Kanatzidis, Mercouri G

2003-11-01

The synthesis, crystal structures, chemical and spectroscopic properties of NaPdPS{sub 4}, RbPdPS{sub 4}, and RbPdPS{sub 4}{l_brace}Rb{sub 0.33}P{sub 0.4}S{sub 2.23}O{sub x}{r_brace} are described. NaPdPS{sub 4}, RbPdPS{sub 4}, are isostructural and crystallize in the tetragonal system I4/mcm with cell parameters a=7.3074(8) A, c=12.2308(14) A and a=8.2954(3) A, c=12.2284(4) A respectively. RbPdPS{sub 4}{l_brace}Rb{sub 0.33}P{sub 0.4}S{sub 2.23}O{sub x}{r_brace} is cubic, space group Pm-3n and a=12.0042(2) A. All compounds contain the same ((1)/({infinity}))[PdPS{sub 4}]{sup -} chains made of alternating square planar Pd{sup 2+} cations and tetrahedral [PS{sub 4}]{sup 3-} anions. RbPdPS{sub 4}{l_brace}Rb{sub 0.33}P{sub 0.4}S{sub 2.23}O{sub x}{r_brace} contains co-crystallized highly disordered molecular species encapsulated within [Rb{sub 8}] cubic cavities. Spectroscopic solid state {sup 31}P NMR, infrared and Raman data as well as elemental analysis suggest that these species could be S{sub n}{sup 2-} (n=3 or 4) anions and possibly cationic [P{sub 4}S{sub 6}O]{sup 6+} fragments. NaPdPS{sub 4} and RbPdPS{sub 4} exhibit exfoliative dissolution in polar solvents giving rise to solutions that show signs of complex fluid behavior.

A study of PLC system vulnerability checklists in nuclear power plants

International Nuclear Information System (INIS)

Cha, Ki Jong; Cho, Gi Ho; Ahn, Jaeh Young; Kim, Young Mi; Kwon, Yong Il

2012-01-01

Because the design of the PLCs (Programmable Logic Controller) in the I and C (Instrument and Control) systems for NPP (Nuclear Power Plant) were carried out independently, the problems of cyber security were not addressed in the PLC system designs. Recently, the analysis and the countermeasure development for the PLC systems became mandatory due to the developments in cyber attack techniques and the increasingly revealed vulnerability to such attacks. A comparative analysis on the cyber security checklist of PLC in industry control system and in NPP systems was carried out, and in this paper, the cyber security regulatory trend and the PLC usage status are described

A study of PLC system vulnerability checklists in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Cha, Ki Jong; Cho, Gi Ho; Ahn, Jaeh Young [Convergence technology Research Commercialization Center, Daejeon (Korea, Republic of); Kim, Young Mi; Kwon, Yong Il [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2012-10-15

Because the design of the PLCs (Programmable Logic Controller) in the I and C (Instrument and Control) systems for NPP (Nuclear Power Plant) were carried out independently, the problems of cyber security were not addressed in the PLC system designs. Recently, the analysis and the countermeasure development for the PLC systems became mandatory due to the developments in cyber attack techniques and the increasingly revealed vulnerability to such attacks. A comparative analysis on the cyber security checklist of PLC in industry control system and in NPP systems was carried out, and in this paper, the cyber security regulatory trend and the PLC usage status are described.

Structural, elastic, and electronic properties of new 211 MAX phase Nb{sub 2}GeC from first-principles calculations

Energy Technology Data Exchange (ETDEWEB)

Shein, I.R. [Institute of Solid State Chemistry, Ural Branch of the Russian Academy of Sciences, Ekaterinburg 620990 (Russian Federation); Ivanovskii, A.L., E-mail: ivanovskii@ihim.uran.ru [Institute of Solid State Chemistry, Ural Branch of the Russian Academy of Sciences, Ekaterinburg 620990 (Russian Federation)

2013-02-01

Very recently (2012, Phys. Rev Lett., 109, 035502) a new hexagonal (s.g. P63/mmc, Music-Sharp-Sign 194) ternary phase Nb{sub 2}GeC, which belongs to so-called 211-like MAX phases, was discovered. In order to get a systematic insight into the structural, elastic, and electronic properties of Nb{sub 2}GeC, we used two complementary DFT-based first-principles approaches (as implemented in the VASP and Wien2k packages) to calculate the optimized structural parameters, band structure, densities of state, Fermi surface, and a set of elastic parameters: elastic constants (C{sub ij}), bulk modulus (B), compressibility ({beta}), shear modulus (G), Young's modulus (Y), and elastic anisotropy indexes, which were discussed in comparison with available data. Besides, the inter-atomic bonding picture for Nb{sub 2}GeC was discussed using electron density maps and Bader's charge analysis.

A 2-1-1 research collaboration: participant accrual and service quality indicators.

Science.gov (United States)

Eddens, Katherine S; Alcaraz, Kassandra I; Kreuter, Matthew W; Rath, Suchitra; Greer, Regina

2012-12-01

In times of crises, 2-1-1 serves as a lifeline in many ways. These crises often cause a spike in call volume that can challenge 2-1-1's ability to meet its service quality standards. For researchers gathering data through 2-1-1s, a sudden increase in call volume might reduce accrual as 2-1-1 has less time to administer study protocols. Research activities imbedded in 2-1-1 systems may affect directly 2-1-1 service quality indicators. Using data from a 2-1-1 research collaboration, this paper examines the impact of crises on call volume to 2-1-1, how call volume affects research participant accrual through 2-1-1, and how research recruitment efforts affect 2-1-1 service quality indicators. t-tests were used to examine the effect of call volume on research participant accrual. Linear and logistic regressions were used to examine the effect of research participant accrual on 2-1-1 service quality indicators. Data were collected June 2010-December 2011; data were analyzed in 2012. Findings from this collaboration suggest that crises causing spikes in call volume adversely affect 2-1-1 service quality indicators as well as accrual of research participants. Administering a brief (2-3 minute) health risk assessment did not affect service quality negatively, but administering a longer (15-18 minute) survey had a modest adverse effect on these indicators. In 2-1-1 research collaborations, both partners need to understand the dynamic relationship among call volume, research accrual, and service quality and adjust expectations accordingly. If research goals include administering a longer survey, increased staffing of 2-1-1 call centers may be needed to avoid compromising service quality. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Anomalous behavior of soft mode attenuation in the incommensurate phase in Cd2Nb2O7, K2SeO4 and Rb2ZnBr4

International Nuclear Information System (INIS)

Smolenskij, G.A.; Kolpakova, N.N.; Sher, E.S.; Brzhezina, B.

1986-01-01

Moderation of soft mode attenuation in the incommensurate phase in Cd 2 Nb 2 O 7 , K 2 SeO 4 and Rb 2 ZnBr 4 is observed at temperature drop and anomalous jump-like decrease of integral intensity of the soft mode under transition to the low-temperature commensurate phase. Anomalous behaviour of the soft mode is explained by wave amplitudon contribution (q=0) in Raman spectrum of the first order and composite tone (wave amplitudon (q=0) +- wave phase (q=K i )) in Raman spectrum of the second order. Relative contribution of the phase wave (q=K i ) to soft mode attenuation can be estimated supposing that wave amplitudon attenuation is G A ∼ (T i -T) -1 . ΔG f max makes up approximately 6 cm -1 in Cd 2 Nb 2 O 7 and approximately 3 cm -1 in K 2 SeO 4 and Rb 2 ZnBr 4 at temperatures above T c . In the low-temperature phase the soft mode corresponds to the wave amplitudon (q=0) in the Raman spectrum of the first order at T c - 26 K) in Cd 2 Nb 2 O 7 , T c - 13 K) in K 2 SeO 4 and T c - 163 K) in Rb 2 ZnBr 4

Partial cross sections for Rb- photodetachment in the region of the Rb(5p2Psub(1/2,3/2)) thresholds and their analysis by multichannel quantum defect theory

International Nuclear Information System (INIS)

Frey, P.; Lawen, M.; Breyer, F.; Klar, H.; Hotop, H.

1982-01-01

A crossed ion-laser beam apparatus has been used to measure accurate relative total and partial cross sections for photodetachment from Rb - ions with high photon energy resolution (0.1-0.6 cm -1 ) in the region of the Rb(5p 2 Psub(1/2,3/2)) thresholds (photon energy range 16.350-16.820 cm -1 ). Satisfactory fits to these data by multichannel quantum defect theory (MQDT) have been obtained, resulting in a reliable set of seven MQDT parameters. The electron angular distribution parameter for the Rb(5s) channel was found to be β(5s)=2, independent of photon energy, MQDT predicts a sharp, window-type variation of β(5s) around the minimum of the 5s-cross section below the Rb(5p 2 Psub(1/2)) threshold (where an accurate experimental measurement of β(5s) was not possible) and a similar behaviour of β(6s) in the case of Cs - photodetachment below the Cs(6p 2 Psub(1/2)) threshold. (orig.)

The collision cross sections for excitation energy transfer in Rb*(5P3/2)+K(4S1/2)→Rb(5S1/2)+K*(4PJ) processes

International Nuclear Information System (INIS)

Horvatic, V.; Vadla, C.; Movre, M.

1993-01-01

The collisional excitation transfer for the processes Rb * (5P 3/2 ) + K(4S 1/2 ) → Rb(5S 1/2 ) + K * (4P J ), J = 1/2, 3/2, was investigated using two-photon laser excitation techniques with a thermionic heat-pipe diode as a detector. The population densities of the K 4P J levels induced by collisions with excited Rb atoms as well as those produced by direct laser excitation of the potassium atoms were probed through the measurement of the thermionic signals generated due to the ionization of the potassium atoms emerging from the K(4P J ) → K(7S 1/2 ) excitation channel. (orig./WL)

Molecular dissociation and nascent product state distributions detected with atomic wavepacket interferometry and parametric four-wave mixing: Rb2 predissociation observed by quantum beating in Rb at 18.2 THz

International Nuclear Information System (INIS)

Xiao, Y; Senin, A A; Ricconi, B J; Kogler, R; Zhu, C J; Eden, J G

2008-01-01

Dissociation of a diatomic molecule and the excited-state distribution of the nascent atomic fragments can be detected and characterized by atomic wavepacket interferometry and a coherent nonlinear optical process, such as parametric four-wave mixing (PFWM), in ultrafast pump-probe experiments. Underlying these experiments is a reliance on atom-atom interaction to alter the properties of an atomic wavepacket which, in turn, impacts the phase and amplitude of a coherent optical signal. Specifically, quantum beating in the atomic species provides a sensitive, in situ probe of molecular dissociation by detecting approaching dissociation fragments through long-range dipole-dipole interaction. The resulting influence of this interaction on the amplitude and phase of the quantum beating is observed in temporal or Fourier domains by probing the wavepacket by interferometry and PFWM with 100-150 fs laser pulses. The wavepacket thus serves as a detector of molecular dissociation fragments and the dynamics of atom-atom interactions are converted into the macroscopic domain by the PFWM signal and idler waves. Femtosecond pump-probe experiments are described in which the predissociation of electronically excited Rb 2 states in the ∼24 000-28 000 cm -1 interval, and the distribution of nascent atomic fragments into Rb excited states (7s, 5d, 6s, 4d and 5p) spanning an energy range >1.25 eV, have been observed in Rb vapour with atomic number densities of ∼6 x 10 13 -3 x 10 17 cm -3 . Quantum beating at 18.2 THz (corresponding to the Rb 7s-5d J (J = 5/2) energy defect of ∼608 cm -1 ) is superimposed onto the axially phase matched PFWM signal wave generated at λ S ∼ 420 nm (Rb 6 2 P J → 5 2 S 1/2 transitions) and recovered by Fourier analysis of the signal wave intensity as the pump-probe time delay (Δt) is scanned. The dominant exit channels for Rb 2 predissociation are found to be sensitive to the interval of internuclear separation R in which the molecular

Interpretation of the CABRI-RAFT RB1 and RB2 tests through detailed data evaluation and PAPAS-2S code analysis

International Nuclear Information System (INIS)

Fukano, Yoshitaka; Sato, Ikken

2001-08-01

The CABRI-RAFT RB1 and RB2 tests were aiming at a study on impact of fuel pin failure under an overpower condition leading to fuel melting. Using a special technique, combination of through-cladding failure and fuel melting was realized. In the RB1 test, fuel ejection was prevented under a limited fuel melting condition. On the other hand, significant fuel melting was applied in the RB2 test so as to get the fuel ejection, thereby obtaining information on the fuel ejection behavior. Interpretation for these tests through the detailed experimental data evaluation and the PAPAS-2S code analysis is performed in this study. Through this study, it is indicated that molten fuel ejection can be prevented with the low smear density fuel as far as the fuel melting is not large for a slit-type cladding defect. Fuel ejection becomes possible in the case of significant fuel melting with a very thin solid fuel shell surrounding the molten fuel cavity. However, the rapidness of the fuel ejection with the low smear density fuel is less pronounced compared with that of the high smear density fuel. It is also confirmed that there is considerable DN-precursor release into the coolant flow already before fuel ejection. The result is very useful for evaluation of anomaly detection with DN signal observation. (author)

C_6_0"3"- versus C_6_0"4"- /C_6_0"2"- - synthesis and characterization of five salts containing discrete fullerene anions

International Nuclear Information System (INIS)

Boeddinghaus, M. Bele; Klein, Wilhelm; Wahl, Bernhard; Faessler, Thomas F.; Jakes, Peter; Eichel, Ruediger A.

2014-01-01

Five new compounds, [Rb(18crown-6)]_3[C_6_0] (1), [Rb(18crown-6)]_6[C_6_0]_2(C_3H_7NO)_2(C_4H_8O)_2 (2), [Rb(benzo18crown-6)]_6[C_6_0]_2(C_2H_8N_2)_5 (3), [Cs(benzo18crown-6)]_3C_6_0(C_2H_8N_2)_2 (4), and [Cs_3(benzo18crown-6)_5]C_6_0(C_2H_8N_2)_(_4_._5_+_x_) (5) were synthesized and characterized by single-crystal X-ray structure determination. All compounds contain discrete C_6_0 anions, which are ordered in 1, 2, and 4, where direct cation-anion contacts occur. The unit cells of 1 and 2 contain two independent fullerides, which coordinate to the rubidium atoms either of two or of four [Rb(18crown-6)] units. Owing to the presence of differently coordinated fullerene units in compounds 1 and 2, a possible disproportionation of C_6_0"3"- into C_6_0"2"- and C_6_0"4"- anions is discussed. In 3 and 4 the C_6_0 anions are coordinated by three Rb and Cs atoms, respectively. In all compounds the average charge of the anion is -3. Magnetic data reveal a doublet spin state for 3. The EPR spectra are discussed for compounds 3 and 5. The role of a dynamic Jahn-Teller distortion is discussed, and we report the first IR spectroscopic data of fullerene trianions, which have been obtained in solution. (Copyright copyright 2014 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Development of a preclinical 211Rn/211At generator system for targeted alpha therapy research with 211At.

Science.gov (United States)

Crawford, Jason R; Yang, Hua; Kunz, Peter; Wilbur, D Scott; Schaffer, Paul; Ruth, Thomas J

2017-05-01

The availability of 211 At for targeted alpha therapy research can be increased by the 211 Rn/ 211 At generator system, whereby 211 At is produced by 211 Rn electron capture decay. This study demonstrated the feasibility of using generator-produced 211 At to label monoclonal antibody (BC8, anti-human CD45) for preclinical use, following isolation from the 207 Po contamination also produced by these generators (by 211 Rn α-decay). 211 Rn was produced by 211 Fr electron capture decay following mass separated ion beam implantation and chemically isolated in liquid alkane hydrocarbon (dodecane). 211 At produced by the resulting 211 Rn source was extracted in strong base (2N NaOH) and purified by granular Te columns. BC8-B10 (antibody conjugated with closo-decaborate(2-)) was labeled with generator-produced 211 At and purified by PD-10 columns. Aqueous solutions extracted from the generator were found to contain 211 At and 207 Po, isolated from 211 Rn. High radionuclidic purity was obtained for 211 At eluted from Te columns, from which BC8-B10 monoclonal antibody was successfully labeled. If not removed, 207 Po was found to significantly contaminate the final 211 At-BC8-B10 product. High yield efficiencies (decay-corrected, n=3) were achieved for 211 At extraction from the generator (86%±7%), Te column purification (70%±10%), and antibody labeling (76%±2%). The experimental 211 Rn/ 211 At generator was shown to be well-suited for preclinical 211 At-based research. We believe that these experiments have furthered the knowledge-base for expanding accessibility to 211 At using the 211 Rn/ 211 At generator system. As established by this work, the 211 Rn/ 211 At generator has the capability of facilitating preclinical evaluations of 211 At-based therapies. Copyright © 2017 Elsevier Inc. All rights reserved.

Reliability analysis of PLC safety equipment

Energy Technology Data Exchange (ETDEWEB)

Yu, J.; Kim, J. Y. [Chungnam Nat. Univ., Daejeon (Korea, Republic of)

2006-06-15

FMEA analysis for Nuclear Safety Grade PLC, failure rate prediction for nuclear safety grade PLC, sensitivity analysis for components failure rate of nuclear safety grade PLC, unavailability analysis support for nuclear safety system.

Reliability analysis of PLC safety equipment

International Nuclear Information System (INIS)

Yu, J.; Kim, J. Y.

2006-06-01

FMEA analysis for Nuclear Safety Grade PLC, failure rate prediction for nuclear safety grade PLC, sensitivity analysis for components failure rate of nuclear safety grade PLC, unavailability analysis support for nuclear safety system

Synthesis and crystal structure of hydrogen phosphites RbH2PO3, CsH2PO3, and TlH2PO3

International Nuclear Information System (INIS)

Kosterina, E.V.; Troyanov, S.I.; Kemnits, Eh.; Aslanov, L.A.

2001-01-01

The crystal acid phosphites RbH 2 PO 3 , CsH 2 PO 3 and TlH 2 PO 3 were separated during reaction of Rb, Cs and Tl carbonates with phosphorous acid solution. The crystal structure of the compounds was analyzed by X-ray diffraction method at 150 K. CsH 2 PO 3 has a monoclinic system, a = 7.930(2), b = 8.929(2), c = 13.163(3) A, β = 104.84(3) Deg, V = 900.9(4) A 3 , Z 8, sp. gr. P2 1 /c, R 1 = 0.239. In the structure hydrogen bonds integrate the PHO 3 tetrahedrons in the unlimited zigzag chains [HPHO 3 ] n n- laying at the layers, which are alternate to the layers of metal cations. The layers of anion chains have a wavy form [ru

Topologically identical, but geometrically isomeric layers in hydrous α-, β-Rb[UO{sub 2}(AsO{sub 3}OH)(AsO{sub 2}(OH){sub 2})]·H{sub 2}O and anhydrous Rb[UO{sub 2}(AsO{sub 3}OH)(AsO{sub 2}(OH){sub 2})

Energy Technology Data Exchange (ETDEWEB)

Yu, Na; Klepov, Vladislav V. [Forschungszentrum Jülich GmbH, Institute for Energy and Climate Research (IEK-6), 52428 Jülich (Germany); Villa, Eric M. [Department of Chemistry, Creighton University, 2500 California Plaza, Omaha NE 68178 (United States); Bosbach, Dirk [Forschungszentrum Jülich GmbH, Institute for Energy and Climate Research (IEK-6), 52428 Jülich (Germany); Suleimanov, Evgeny V. [Department of Chemistry, Lobachevsky State University of Nizhny Novgorod, 603950 Nizhny Novgorod (Russian Federation); Depmeier, Wulf [Institut für Geowissenschaften, Universität zu Kiel, 24118 Kiel (Germany); Albrecht-Schmitt, Thomas E., E-mail: albrecht-schmitt@chem.fsu.edu [Department of Chemistry and Biochemistry, Florida State University, 102 Varsity Way, Tallahassee, FL 32306-4390 (United States); Alekseev, Evgeny V., E-mail: e.alekseev@fz-juelich.de [Forschungszentrum Jülich GmbH, Institute for Energy and Climate Research (IEK-6), 52428 Jülich (Germany); Institut für Kristallographie, RWTH Aachen University, 52066 Aachen (Germany)

2014-07-01

The hydrothermal reaction of uranyl nitrate with rubidium nitrate and arsenic (III) oxide results in the formation of polymorphic α- and β-Rb[UO{sub 2}(AsO{sub 3}OH)(AsO{sub 2}(OH){sub 2})]·H{sub 2}O (α-, β-RbUAs) and the anhydrous phase Rb[UO{sub 2}(AsO{sub 3}OH)(AsO{sub 2}(OH){sub 2})] (RbUAs). These phases were structurally, chemically and spectroscopically characterized. The structures of all three compounds are based upon topologically identical, but geometrically isomeric layers. The layers are linked with each other by means of the Rb cations and hydrogen bonding. Dehydration experiments demonstrate that water deintercalation from hydrous α- and β-RbUAs yields anhydrous RbUAs via topotactic reactions. - Graphical abstract: Three different layer geometries observed in the structures of Rb[UO{sub 2}(AsO{sub 3}OH)(AsO{sub 2}(OH){sub 2})] and α- and β- Rb[UO{sub 2}(AsO{sub 3}OH)(AsO{sub 2}(OH){sub 2})]·H{sub 2}O. Two different coordination environments of uranium polyhedra (types I and II) are shown schematically on the top of the figure. - Highlights: • Three new uranyl arsenates were synthesized from the hydrothermal reactions. • The phases consist of the topologically identical but geometrically different layers. • Topotactic transitions were observed in the processes of mono-hyrates dehydration.

On the determination of the colour term in the P-L-C relation for cepheids

International Nuclear Information System (INIS)

Feast, M.W.; Balona, L.A.

1980-01-01

Recent speculations that the coefficient of the colour term in the P-L-C relation for cepheids may be considerably different from 2.7 are inconsistent with existing data on LMC cepheids. The colour coefficient recently derived is not significantly affected by taking into account an absorption induced correlation between the errors in 0 > and ( 0 > - 0 >). The computer simulation which shows the bias introduced in the colour coefficient when this is derived by an inappropriate method (simple least squares) is consistent with theory and in accord with actual results in the LMC. This gives added confidence in the unbiased nature of the results derived by a maximum likelihood method which takes into account errors in each variable. (author)

Automatic production of Iodine-123 with PLC 135/U

International Nuclear Information System (INIS)

Moghaddam-Banaem, L.; Afarideh, H.

2004-01-01

In this project, the automatic system for production of Iodine-123 with PLC/135μ Siemens, which is designed and installed for the first time in Iran, is discussed. The PLC (Programmable Logic Controller) is used to control industrial processing, which is similar to a computer and consists of central processing unit and memory and Input/Output units. PLC receives input information from auxiliary units such as sensors, switches, etc. and software processes data in memory and then sends commands to output units such as relays, motors, etc.The target section in Iodine production consists of 8 stages. In order to be sure automation works properly the system can be operated both manually and automatically. First PLC checks Manual/Automatic switch and in the case of automatic mode, PLC runs the program in memory and processing is done automatically. For this purpose, PLC takes the value of pressures and temperatures from analog inputs and after processing them it sends commands to digital output to activate valves or vacuum pumps or heaters. In this paper the following subjects are discussed: 1) Production of Iodine 123 2) PLC structure and auxiliary boards 3) Sensors and actuators and their connection to PLC 4) Software flowchart

Room and high temperature interactions in sodium and rubidium rich ternary nitrate mixtures of UO2(NO3)2.6H2O - NaNO3 - RbNO3

International Nuclear Information System (INIS)

Kalekar, Bhupesh B.; Reddy, A.V.R.; Raje, Naina

2016-01-01

High temperature interaction behavior of nitrates is important for characterizing different intermediate products and their thermal stabilities during the calcination of nuclear waste before their immobilization in the stable glass matrix. Mixtures of UO 2 (NO 3 ) 2 .6H 2 O (UNH) with NaNO 3 (NaN) and RbNO 3 (RbN) were prepared by mixing the weighed amounts of component nitrates and grinding gently in a mortar and pestle. The mixing and grinding of individual nitrate components in a mortar with pestle showed the agglomeration of solid particles and subsequent dissolution probably in the water of crystallization of UNH. The continued grinding and mixing showed the reappearance of the solid powder. The original yellow color of the mixture was changed to greenish yellow color. The mixtures were subjected to thermal measurements using Netzsch Thermobalance (Model No.: STA 409 PC Luxx) coupled to Bruker FTIR system (Model No.: Tensor 27) via a heated Teflon capillary (1 m long, 2 mm i.d.). TG - DTG curves of equimolar mixture are displayed. The plateau was observed on TG curve in the temperature region of 31- 250 °C. It is reported that Na(UO 2 (NO 3 ) 3 ).H 2 O and Rb(UO 2 (NO 3 ) 3 ) formed around 250 °C in the equimolar nitrate mixtures of UNH-NaN and UNH-RbN. Thermal and XRD results indicated the formation of Na(UO 2 (NO 3 ) 3 ).H 2 O and Rb(UO 2 (NO) 3 ) 3 ) even by mixing the UNH, NaN and RbN in equimolar ratios at room temperature

Mixed alkali neodymium orthoborates: K_9Li_3Nd_3(BO_3)_7 and A_2LiNd(BO_3)_2 (A = Rb, Cs)

International Nuclear Information System (INIS)

Chen, Pengyun; Xia, Mingjun; Li, Rukang

2016-01-01

Crystals of mixed alkali neodymium orthoborates, K_9Li_3Nd_3(BO_3)_7 and A_2LiNd(BO_3)_2 (A = Rb, Cs) were obtained by spontaneous crystallization. K_9Li_3Nd_3(BO_3)_7 crystallizes in space group P2/c with cell parameters of a = 11.4524(7) Aa, b = 10.1266(6) Aa, c = 12.3116 (10) Aa, β = 122.0090(10) . In the structure, NdO_8 polyhedra share corners and connect with planer BO_3 groups to form infinite [Nd_3B_3O_2_1]_n chains. These chains are linked by additional BO_3 groups to produce a double layer of [Nd_6B_6O_3_8]_n blocks in the ac plane with K and Li ions filled into the cavities. A_2LiNd(BO_3)_2 (A = Rb, Cs) crystallizes in space group Pbcm, with cell parameters of a = 7.113(2) Aa, b = 9.691(3) Aa and c = 10.135(3) Aa for Rb_2LiNd(BO_3)_2, and a = 7.2113(3) Aa, b = 9.9621(4) Aa, and c = 10.3347(4) Aa for Cs_2LiNd(BO_3)_2. In the structure, NdO_8 polyhedra are corner-sharing with each other and further interlinked by BO_3 groups to comprise the infinite [Nd_4B_4O_2_4] sheets in the bc plane, with Rb/Cs and Li ions occupying the interlayered space. The compounds show effective near-IR emission and their associated lifetimes are obtained by fluorescence spectra. (Copyright copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Studies of rubidium selenate with secondary phase of RbOH under humidified reducing atmosphere

International Nuclear Information System (INIS)

Beyribey, Berceste; Hallinder, Jonathan; Poulsen, Finn Willy; Bonanos, Nikolaos; Mogensen, Mogens

2012-01-01

Highlights: ► Degradation of Rb 2 SeO 3 and Rb 2 SeO 4 to form RbOH provide protonic conductivity. ► The conductivity increases by increasing temperature. ► The highest conductivity value of 2.01·10 −4 S cm −1 is observed at 317 °C. ► The work may state conductivity rise in solid acid electrolytes upon decomposition. - Abstract: The high temperature properties of Rb 2 SeO 4 have been studied by calorimetry, impedance spectroscopy and X-ray powder diffraction. As synthesized, Rb 2 SeO 4 includes a second phase of Rb 2 SeO 3 , which can be eliminated upon heating the compound. As expected, no conductivity is observed in dry (pH 2 O 2 O = 0.1 bar) air at 176 °C, the conductivity increases sharply from 8.6·10 −8 to 1.7·10 −6 S cm −1 . Under humidified (pH 2 O = 0.1 bar) reducing atmosphere (9%H 2 in N 2 ), the conductivity increases to 2.0·10 −4 S cm −1 at 317 °C. Degradation of Rb 2 SeO 3 and Rb 2 SeO 4 to form RbOH, which is known as a proton conductor, are thought to be responsible for the observed conductivity in humidified atmospheres. Our observations may explain the conductivity rise in other solid acid electrolytes, including sulfate and selenate groups, around their decomposition temperatures, in humidified atmospheres.

New uranium chalcoantimonates, RbU{sub 2}SbS{sub 8} and KU{sub 2}SbSe{sub 8}, with a polar noncentrosymmetric structure

Energy Technology Data Exchange (ETDEWEB)

Choi, K S; Kanatzidis, M G

1999-09-01

The new compounds, RbU{sub 2}SbS{sub 8} and KU{sub 2}SbSe{sub 8}, were prepared as golden-black, blocklike crystals by the polychalcogenide molten flux method. RbU{sub 2}SbS{sub 8} has a two-dimensional character with layers running perpendicular to the c-axis. The coordination geometry around the U{sup 4+} atoms is best described as a bicapped trigonal prism. The trigonal prisms share triangular faces with neighboring prisms, forming one-dimensional columns along the a-axis. The columns are then joined to construct sheets by sharing capping S atoms. Sb{sup 3+} ions are sitting at the center of a slightly distorted seesaw coordination environment (CN = 4). Rb{sup +} ions are stabilized in 8-coordinate bicapped trigonal prismatic sites. KU{sub 2}SbSe{sub 8} has essentially the same structure as RbU{sub 2}SbS{sub 8}. However, Sb{sup 3+} and K{sup +} ions appear disordered in every other layer resulting in a different unit cell. RbU{sub 2}SbS{sub 8} is a semiconductor with a band gap of 1.38 eV. The band gap of KU{sub 2}SbSe{sub 8} could not be determined precisely due to the presence of overlapping intense f-f transitions in the region (0.5--1.1 eV). The Raman spectra show the disulfide stretching vibration in RbU{sub 2}SbS{sub 8} at 479 cm{sup {minus}1} and the diselenide stretching vibration in KU{sub 2}SbSe{sub 8} at 252 cm{sup {minus}1}. Magnetic susceptibility measurements indicate the presence of U{sup 4+} centers in the compounds. The compounds do not melt below 1,000 C under vacuum.

Development and Application of POSAFE-Q PLC Platform

International Nuclear Information System (INIS)

Lee, MyeongKyun; Song, SeungWhan; Yun, DongHwa

2012-01-01

The Safety-grade Programmable Logic Controller (PLC) Platform named POSAFE-Q was developed so that it meets the requirements of the Safety Class 1E, Quality Class 1, and Seismic Category I. Development process of the POSAFE-Q software developed in accordance with software life cycles. The POSAFE-Q meets safety and suitability for design are based on digital I and C laws, guidelines and technical standards. The POSAFE-Q PLC obtained approval for Topical Report from the Nuclear Safety and Security Commission in Korea. (author)

37 CFR 211.2 - Recordation of documents pertaining to mask works.

Science.gov (United States)

2010-07-01

... pertaining to mask works. 211.2 Section 211.2 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES MASK WORK PROTECTION § 211.2 Recordation of documents pertaining to mask works. The conditions prescribed in § 201.4 of this chapter for recordation of transfers...

40 CFR 211.110-2 - National security exemptions.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false National security exemptions. 211.110... ABATEMENT PROGRAMS PRODUCT NOISE LABELING General Provisions § 211.110-2 National security exemptions. (a) A new product which is produced to conform with specifications developed by national security agency...

Variance in total levels of phospholipase C zeta (PLC-ζ) in human sperm may limit the applicability of quantitative immunofluorescent analysis as a diagnostic indicator of oocyte activation capability.

Science.gov (United States)

Kashir, Junaid; Jones, Celine; Mounce, Ginny; Ramadan, Walaa M; Lemmon, Bernadette; Heindryckx, Bjorn; de Sutter, Petra; Parrington, John; Turner, Karen; Child, Tim; McVeigh, Enda; Coward, Kevin

2013-01-01

To examine whether similar levels of phospholipase C zeta (PLC-ζ) protein are present in sperm from men whose ejaculates resulted in normal oocyte activation, and to examine whether a predominant pattern of PLC-ζ localization is linked to normal oocyte activation ability. Laboratory study. University laboratory. Control subjects (men with proven oocyte activation capacity; n = 16) and men whose sperm resulted in recurrent intracytoplasmic sperm injection failure (oocyte activation deficient [OAD]; n = 5). Quantitative immunofluorescent analysis of PLC-ζ protein in human sperm. Total levels of PLC-ζ fluorescence, proportions of sperm exhibiting PLC-ζ immunoreactivity, and proportions of PLC-ζ localization patterns in sperm from control and OAD men. Sperm from control subjects presented a significantly higher proportion of sperm exhibiting PLC-ζ immunofluorescence compared with infertile men diagnosed with OAD (82.6% and 27.4%, respectively). Total levels of PLC-ζ in sperm from individual control and OAD patients exhibited significant variance, with sperm from 10 out of 16 (62.5%) exhibiting levels similar to OAD samples. Predominant PLC-ζ localization patterns varied between control and OAD samples with no predictable or consistent pattern. The results indicate that sperm from control men exhibited significant variance in total levels of PLC-ζ protein, as well as significant variance in the predominant localization pattern. Such variance may hinder the diagnostic application of quantitative PLC-ζ immunofluorescent analysis. Copyright © 2013 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Separation of integrin-dependent adhesion from morphological changes based on differential PLC specificities.

Science.gov (United States)

Wooten, D K; Teague, T K; McIntyre, B W

1999-01-01

In normal lymphocytes an inside-out signal up-regulating integrin adhesion is followed by a ligand-mediated outside-in cell spreading signal. Protein kinase C (PKC) inhibition blocks lymphocyte adherence to and spreading on fibronectin. In contrast, putative PLC inhibitors yield distinct differences with respect to adhesion and morphology. The phosphatidylinositol-specific phospholipase C (PLC) inhibitor neomycin blocked spreading of CD3/CD28-activated T cells on fibronectin by disrupting adhesion. Furthermore, when an additional inside-out signal for fibronectin adhesion is unnecessary such as with HPB-ALL T leukemic or phorbol-myristate-acetate-treated normal T cells, neomycin treatment does not alter adhesion or morphology. However, the phosphatidylcholine-specific PLC inhibitor D609 abrogates cell spreading without affecting adhesion to fibronectin in these cells as well as the CD3/CD28-activated T cells. These results strongly suggest that inside-out signaling for the integrin alpha4beta1 in lymphocytes proceeds through phosphatidylinositol-specific PLC and PKC, whereas the outside-in signal utilizes phosphatidylcholine-specific PLC and PKC.

Raman spectra of the solid-solution between Rb sub 2 La sub 2 Ti sub 3 O sub 1 sub 0 and RbCa sub 2 Nb sub 3 O sub 1 sub 0

CERN Document Server

Kim, H J; Yun, H S

2001-01-01

A site preference of niobium atom in Rb sub 2 sub - sub x La sub 2 Ti sub 3 sub - sub x Nb sub x O sub 1 sub 0 (0.0<=x<=1.0) and RbLa sub 2 sub - sub x Ca sub x Ti sub 2 sub - sub x Nb sub 1 sub + sub x O sub 1 sub 0 (0.0<=x<= 2.0), which are the solid-solutions between Rb sub 2 La sub 2 Ti sub 3 O sub 1 sub 0 are RbCa sub 2 Nb sub 3 O sub 1 sub 0 , has been investigated by Raman spectroscopy. The Raman spectra of Rb sub 2 sub - sub x La sub 2 Ti sub 3 sub - sub x Nb sub x O sub 1 sub 0 (0.0<=x<=1.0) gave an evidence that niobium atoms substituted for titanium atoms preferably occupy the highly distorted outer octahedral sites rather than the central ones in triple-octahedral perovskite layers. In contrast, the Raman spectra of RbLa sub 2 sub - sub x Ca sub x Ti sub 2 sub - sub x Nb sub 1 sub + sub x O sub 1 sub 0 (0.0<=x<= 2.0) showed no clear information for the cationic arrangement in perovskite slabs. This difference indicated that a site preference of niobium atoms is observed onl...

Ginsenoside Rb1 for Myocardial Ischemia/Reperfusion Injury: Preclinical Evidence and Possible Mechanisms

Directory of Open Access Journals (Sweden)

Qun Zheng

2017-01-01

Full Text Available Ginseng is an important herbal drug that has been used worldwide for many years. Ginsenoside Rb1 (G-Rb1, the major pharmacological extract from ginseng, possesses a variety of biological activities in the cardiovascular systems. Here, we conducted a preclinical systematic review to investigate the efficacy of G-Rb1 for animal models of myocardial ischemia/reperfusion injury and its possible mechanisms. Ten studies involving 211 animals were identified by searching 6 databases from inception to May 2017. The methodological quality was assessed by using the CAMARADES 10-item checklist. All the data were analyzed using RevMan 5.3 software. As a result, the score of study quality ranged from 3 to 7 points. Meta-analyses showed that G-Rb1 can significantly decrease the myocardial infarct size and cardiac enzymes (including lactate dehydrogenase, creatine kinase, and creatine kinase-MB when compared with control group (P<0.01. Significant decrease in cardiac troponin T and improvement in the degree of ST-segment depression were reported in one study (P<0.05. Additionally, the possible mechanisms of G-Rb1 for myocardial infarction are antioxidant, anti-inflammatory, antiapoptosis, promoting angiogenesis and improving the circulation. Thus, G-Rb1 is a potential cardioprotective candidate for further clinical trials of myocardial infarction.

Synthesis and single-crystal structure of the pseudo-ternary compounds LiA[N(CN){sub 2}]{sub 2} (A = K or Rb)

Energy Technology Data Exchange (ETDEWEB)

Reckeweg, Olaf; DiSalvo, Francis J. [Cornell Univ., Ithaca, NY (United States). Baker Lab.

2016-04-01

Crystals of LiA[N(CN){sub 2}]{sub 2} were obtained from the reaction of LiCl and ACl (A = K or Rb) with Ag[N(CN){sub 2}] in water and subsequent evaporation of the filtered solution at 80 C under normal atmospheric conditions. Crystals of the title compound form thin rectangular plates that are transparent, colorless, and very fragile. Single-crystal structure analyses have shown that both compounds are isotypic and adopt the tetragonal space group I4/mcm (no. 140, Z = 4) with the cell parameters a = 701.53(12) and c = 1413.7(5) pm for LiK[N(CN){sub 2}]{sub 2} and a = 730.34(10) and c = 1414.4(4) pm for LiRb[N(CN){sub 2}]{sub 2}. The crystal structure is described and compared to that of the pseudo-binary alkali metal dicyanamides.

Studies of rubidium selenate with secondary phase of RbOH under humidified reducing atmosphere

DEFF Research Database (Denmark)

Beyribey, Berceste; Hallinder, Jonathan; Poulsen, Finn Willy

2012-01-01

The high temperature properties of Rb2SeO4 have been studied by calorimetry, impedance spectroscopy and X-ray powder diffraction. As synthesized, Rb2SeO4 includes a second phase of Rb2SeO3, which can be eliminated upon heating the compound. As expected, no conductivity is observed in dry (pH2O ....001 bar) air. By changing to humidified (pH2O = 0.1 bar) air at 176 deg. C, the conductivity increases sharply from 8.6·10-8 to 1.7·10-6 S cm-1. Under humidified (pH2O = 0.1 bar) reducing atmosphere (9%H2 in N2), the conductivity increases to 2.0·10-4 S cm-1 at 317 C. Degradation of Rb2SeO3 and Rb2SeO4...

Structure of ferroelastic K3H(SeO4)2

International Nuclear Information System (INIS)

Ichikawa, M.; Sato, S.; Komukae, M.; Osaka, T.

1992-01-01

Tripotassium hydrogenbis(selenate), K 3 H(SeO 4 ) 2 , M r = 404.2, monoclinic, A2/a, a = 10.1291 (8), b = 5.9038 (5), c = 14.961 (1) A, β = 103.640 (8) 0 , V = 869.5 (1) A 3 , Z = 4, D x = 3.086 Mg m -3 , λ(Mo Kα) = 0.71073 A, μ = 9.86 mm -1 , F(000) = 760, T = 299 K, R(F) = 0.0294 for 1670 unique reflections. K 3 H(SeO 4 ) 2 is isomorphous with most M 3 H(XO 4 ) 2 -type crystals (M=K,Rb and Cs; Cs; X = S and Se); two SeO 4 groups are connected by a crystallographically symmetric hydrogen bond into a dimer. The bond distances and angles in the SeO 4 group are similar to those in Rb 3 H(SeO 4 ) 2 and Rb 3 D(SeO 4 ) 2 . The hydrogen-bond length, 2.524 (5) A, is the shortest among the members of the M 3 H(SeO 4 ) 2 family exhibiting the low-temperature phase transition. (orig.)

Synthesis and crystal structure of alkali metal diamido dioxosilicates M2SiO2(NH2)2 with M corresponds to K, Rb and Cs

International Nuclear Information System (INIS)

Jacobs, H.; Mengis, H.

1993-01-01

SiO 2 - α-quartz - reacts with alkali metal amides MNH 2 (M corresponds to K, Rb, and Cs) in molar ratios from 1:2 to 1:10 at 450 C ≤ T ≤ 600 C and P(NH 3 ) = 6 kbar in autoclaves to diamidodioxosilicates M[SiO 2 (NH 2 ) 2 ]. Crystals of the colourless compounds which hydrolyze rapidly were investigated by X-ray methods. (orig.)

21 CFR 524.590 - Diclofenac.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Diclofenac. 524.590 Section 524.590 Food and Drugs..., AND RELATED PRODUCTS OPHTHALMIC AND TOPICAL DOSAGE FORM NEW ANIMAL DRUGS § 524.590 Diclofenac. (a) Specifications. Each gram of cream contains 10 milligrams diclofenac sodium. (b) Sponsor. See No. 000010 in § 510...

Toronto's 2-1-1 healthcare services for immigrant populations.

Science.gov (United States)

Cortinois, Andrea A; Glazier, Richard H; Caidi, Nadia; Andrews, Gavin; Herbert-Copley, Mary; Jadad, Alejandro R

2012-12-01

Although access to information on health services is particularly important for recent immigrants, numerous studies have shown that their use of information and referral services is limited. This study explores the role played by 2-1-1 Toronto in supporting recent immigrants. The study objectives were to (1) understand whether 2-1-1 Toronto is reaching and supporting recent immigrants and (2) gain a better appreciation of the information needs of this population group. A phone survey was conducted in 2005-2006 to collect information on 2-1-1 users' characteristics and levels of satisfaction. Survey data were compared (in 2006) with census data to assess their representativeness. To achieve Objective 2, semistructured qualitative interviews were conducted and analyzed in 2006-2007, with a subset of Spanish-speaking callers. Recent immigrants were overrepresented among 2-1-1 callers. However, the survey population was substantially younger and had higher levels of formal education than the general population. Health-related queries represented almost one third of the total. The survey showed very high levels of satisfaction with the service. Many interviewees described their first experiences with the Canadian healthcare system negatively. Most of them had relied on disjointed, low-quality information sources. They trusted 2-1-1 but had discovered it late. Results are mixed in terms of 2-1-1's support to immigrants. A significant percentage of users do not take full advantage of the service. The service could become the information "entry point" for recent immigrants if it was able to reach them early in the resettlement process. Proactive, community-oriented work and a more creative use of technology could help. Copyright © 2012 American Journal of Preventive Medicine. All rights reserved.

Transacsys PLC - Final Results

CERN Multimedia

2002-01-01

Final results from Transacsys PLC. A subsidary of this company was set up to develop the CERN EDH system into a commercial product but incurred too much financial loss so the project was cancelled (1/2 page).

9 CFR 2.11 - Denial of initial license application.

Science.gov (United States)

2010-01-01

... have violated any Federal, State, or local laws or regulations pertaining to animal cruelty within 1... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Denial of initial license application. 2.11 Section 2.11 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT...

Temperature- and pressure-dependent lattice behaviour of RbFe(MoO4)(2)

DEFF Research Database (Denmark)

Waskowska, A.; Gerward, Leif; Olsen, J. S.

2010-01-01

Trigonal RbFe(MoO4)(2) is a quasi-two-dimensional antiferromagnet on a triangular lattice below T-N = 3.8 K, The crystal exhibits also a structural phase transition at T-c = 190 K related to symmetry change from Pm1 to P. We present the temperature-and pressure-dependent characteristics...

21 CFR 524.1146 - Imidacloprid and moxidectin.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Imidacloprid and moxidectin. 524.1146 Section 524... Imidacloprid and moxidectin. (a) Specifications—(1) Each milliliter of solution contains 100 milligrams (mg) imidacloprid and 25 mg moxidectin for use as in paragraph (d)(1) of this section. (2) Each milliliter of...

Tests of the Royce ultrasonic interface level analyzer

International Nuclear Information System (INIS)

WITWER, K.S.

1999-01-01

This document describes testing carried out in 1995 on the Royce Interface Level Analyzer. The testing was carried out in the 305 Bldg., Engineering Testing Laboratory, 300 Area. The Level Analyzer was shown to be able to effectively locate the solid liquid interface layer of two different simulants under various conditions and was able to do so after being irradiated with over 5 million RADS gamma from a Cobalt 60 source

Luminescence and scintillation properties of Rb2HfCl6 crystals

International Nuclear Information System (INIS)

Saeki, Keiichiro; Wakai, Yuki; Fujimoto, Yutaka; Koshimizu, Masanori; Asai, Keisuke; Yanagida, Takayuki; Nakauchi, Daisuke

2016-01-01

We developed a scintillator based on a Rb 2 HfCl 6 crystal as a ternary halide crystal with intrinsic luminescence. In the photoluminescence spectra, two emission bands are observed at 383 and 434 nm. The 434 nm emission band for Rb 2 HfCl 6 may be attributed to [HfCl 6 ] 2- complex ion or [ZrCl 6 ] 2- impurity, since the Rb 2 HfCl 6 contained Zr as impurity at 0.62 mol %. The radioluminescence band is observed at 420 nm and can be attributed to the same origin as the photoluminescence band at 434 nm. The scintillation decay-time constants were 0.84 and 5.4 μs. The light yield was estimated to be 24,100 photons/MeV. (author)

Electronic parameters and top surface chemical stability of RbPb{sub 2}Br{sub 5}

Energy Technology Data Exchange (ETDEWEB)

Atuchin, V.V., E-mail: atuchin@thermo.isp.nsc.ru [Laboratory of Optical Materials and Structures, Institute of Semiconductor Physics, SB RAS, Novosibirsk 90, 630090 (Russian Federation); Isaenko, L.I. [Laboratory of Crystal Growth, Institute of Geology and Mineralogy, SB RAS, Novosibirsk 90, 630090 (Russian Federation); Kesler, V.G. [Laboratory of Physical Principles for Integrated Microelectronics, Institute of Semiconductor Physics, SB RAS, Novosibirsk 90, 630090 (Russian Federation); Pokrovsky, L.D. [Laboratory of Optical Materials and Structures, Institute of Semiconductor Physics, SB RAS, Novosibirsk 90, 630090 (Russian Federation); Tarasova, A.Yu. [Laboratory of Crystal Growth, Institute of Geology and Mineralogy, SB RAS, Novosibirsk 90, 630090 (Russian Federation)

2012-01-16

Highlights: Black-Right-Pointing-Pointer Bridgman growth of RbPb{sub 2}Br{sub 5} crystal. Black-Right-Pointing-Pointer Electronic structure measurements with XPS. Black-Right-Pointing-Pointer Optical crystalline surface fabrication. - Abstract: The RbPb{sub 2}Br{sub 5} crystal has been grown by Bridgman method. The electronic structure of RbPb{sub 2}Br{sub 5} has been measured with XPS for a powder sample. High chemical stability of RbPb{sub 2}Br{sub 5} surface is verified by weak intensity of O 1s core level recorded by XPS and structural RHEED measurements. Chemical bonding effects have been observed by the comparative analysis of element core levels and crystal structure of RbPb{sub 2}Br{sub 5} and several rubidium- and lead-containing bromides using binding energy difference parameters {Delta}{sub Rb} = (BE Rb 3d - BE Br 3d) and {Delta}{sub Pb} = (BE Pb 4f{sub 7/2} - BE Br 3d).

Chemical State of Radiobromine Formed by the Rb{sup 85}(n, {alpha}) Br{sup 82} Reaction; Etat Chimique Du Ra Diobrome Forme Par La Reaction {sup 85}Rb (n, {alpha}) {sup 82}Br; 0425 0418 041c 0418 0427 0415 0421 041a 041e 0415 0421 041e 0421 0422 041e 042f 041d 0418 0415 0420 0410 0414 0418 041e 0410 041a 0422 0418 0412 041d 041e 0413 041e 0411 0420 041e 041c 0410 , 041e 0411 0420 0410 0417 041e 0412 0410 041d 041d 041e 0413 041e 041f 0420 0418 0420 0415 0410 041a 0426 0418 0418 Rb{sup 85}(n, {alpha}) Br{sup 82}; Estado Quimico Del Radiobromo Formado Por La Reaccion {sup 85}Rb (n, {alpha}) {sup 82}Br

Energy Technology Data Exchange (ETDEWEB)

Vlatkovic, M.; Kauiic, S. [' ' Ruder Boskovic' ' Institute, Zagreb, Yugoslavia (Croatia)

1965-04-15

A study has been made of the chemical distribution of radiobromine between its higher (BrO{sup -}{sub 3}) and lower (Br{sup -}, Br{sub 2}, BrO{sup -}) oxidation states produced by nuclear reaction Rb{sup 85}(n, {alpha}) Br{sup 82} in a number of rubidium inorganic solids. The samples of dried Rb{sub 2}SO{sub 4}, Rb{sub 2}S{sub 2}O{sub 8}, RbMnO{sub 4}, RbNO{sub 3}, Rb{sub 2}CO{sub 3} and RblO{sub 3} were irradiated with 14 MeV neutrons by a (T + d) neutron generator. It appeared that in the case of Rb{sub 2}SO{sub 4} irradiated at room temperature or at -195 C approximately 8% of total Br{sup 82} activity was found in the bromate fraction, the rest following the bromide fraction. The room temperature irradiation of RbMnO{sub 4} and RbNO{sub 3} yielded about 1% of activity in the higher oxidation state of bromine and in the cases of Rb{sub 2}S{sub 2}O{sub 8} , Rb{sub 2}CO{sub 3} and RblO{sub 3} activity could be measured only in the bromide fraction. A small increase of the bromate activity was observed when neutron-irradiated Rb{sub 2}SO{sub 4} was heated up to 250 Degree-Sign C. At higher temperatures (up to 500 Degree-Sign C) the activity passed into the lower oxidation state. Theheating of the irradiated RbMnO{sub 4} and RbNO{sub 3} did not provoke any oxidation of bromine activity. While in the case of RbNO{sub 3} pre-irradiation {gamma}-dose of 22 Mrad had no influence upon the distribution of bromine recoils, the analysis of Rb{sub 2}SO{sub 4} pretreated with {gamma}-rays (55 Mrad) gave higher bromate activity compared with the samples that before neutron irradiation had only been dried at 150 Degree-Sign C. In conclusion the authors stress the significance of the chemical constitution of the target compound and non-isotopic media with regard to the distribution of highly energetic Br{sup 82} atoms and to their inability to anneal in the rubidium compounds investigated. (author) [French] Le memoire traite de la repartition, entre ses etats d

Dicty_cDB: [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available VF (Link to library) VFB524 (Link to dictyBase) - - - Contig-U14169-1 VFB524Z (Link... to Original site) - - VFB524Z 233 - - - - Show VFB524 Library VF (Link to library) Clone ID VFB524 (Link to dict...yBase) Atlas ID - NBRP ID - dictyBase ID - Link to Contig Contig-U14169-1 Original site URL http://dict...uences producing significant alignments: (bits) Value N AC116305 |AC116305.2 Dict... cds. 40 0.81 2 Z70204 |Z70204.1 Caenorhabditis elegans cosmid C11G6. 40 2.7 2 AC117176 |AC117176.2 Dictyost

21 CFR 524.1140 - Imidacloprid and ivermectin.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Imidacloprid and ivermectin. 524.1140 Section 524... Imidacloprid and ivermectin. (a) Specifications. The product is available in unit applicator tubes containing 0.4, 1.0, 2.5, or 4.0 milliliters (mL). Each mL of solution contains 100 milligrams (mg) imidacloprid...

Phase transformation kinetics in rolled U-10 wt. % Mo foil: Effect of post-rolling heat treatment and prior γ-UMo grain size

Energy Technology Data Exchange (ETDEWEB)

Jana, Saumyadeep; Overman, Nicole; Varga, Tamas; Lavender, Curt; Joshi, Vineet V.

2017-12-01

The effect of sub-eutectoid heat treatment on the phase transformation behavior in rolled U-10 wt.percent Mo (U10Mo) foils was systematically investigated. The as-cast 5 mm thick foils were initially homogenized at 900 degrees C for 48 hours and were hot rolled to 2 mm and later cold rolled down to 0.2 mm. Three starting microstructures were evaluated: (i) hot- + cold-rolled to 0.2 mm (as-rolled condition), (ii) hot- + cold-rolled to 0.2 mm + annealed at 700 deg. C for 1 hour, and (iii) hot- + cold-rolled to 0.2 mm + annealed at 1000 deg. C for 60 hours. U10Mo rolled foils went through various degrees of decomposition when subjected to the sub-eutectoid heat-treatment step and formed a lamellar microstructure through a cellular reaction mostly along the previous γ-UMo grain boundaries.

C{sub 60}{sup 3-} versus C{sub 60}{sup 4-} /C{sub 60}{sup 2-} - synthesis and characterization of five salts containing discrete fullerene anions

Energy Technology Data Exchange (ETDEWEB)

Boeddinghaus, M. Bele; Klein, Wilhelm; Wahl, Bernhard; Faessler, Thomas F. [Department of Chemistry, Technische Universitaet Muenchen, Garching (Germany); Jakes, Peter; Eichel, Ruediger A. [Institut fuer Energie- und Klimaforschung (IEK-9), Forschungszentrum Juelich (Germany)

2014-04-15

Five new compounds, [Rb(18crown-6)]{sub 3}[C{sub 60}] (1), [Rb(18crown-6)]{sub 6}[C{sub 60}]{sub 2}(C{sub 3}H{sub 7}NO){sub 2}(C{sub 4}H{sub 8}O){sub 2} (2), [Rb(benzo18crown-6)]{sub 6}[C{sub 60}]{sub 2}(C{sub 2}H{sub 8}N{sub 2}){sub 5} (3), [Cs(benzo18crown-6)]{sub 3}C{sub 60}(C{sub 2}H{sub 8}N{sub 2}){sub 2} (4), and [Cs{sub 3}(benzo18crown-6){sub 5}]C{sub 60}(C{sub 2}H{sub 8}N{sub 2}){sub (4.5+x)} (5) were synthesized and characterized by single-crystal X-ray structure determination. All compounds contain discrete C{sub 60} anions, which are ordered in 1, 2, and 4, where direct cation-anion contacts occur. The unit cells of 1 and 2 contain two independent fullerides, which coordinate to the rubidium atoms either of two or of four [Rb(18crown-6)] units. Owing to the presence of differently coordinated fullerene units in compounds 1 and 2, a possible disproportionation of C{sub 60}{sup 3-} into C{sub 60}{sup 2-} and C{sub 60}{sup 4-} anions is discussed. In 3 and 4 the C{sub 60} anions are coordinated by three Rb and Cs atoms, respectively. In all compounds the average charge of the anion is -3. Magnetic data reveal a doublet spin state for 3. The EPR spectra are discussed for compounds 3 and 5. The role of a dynamic Jahn-Teller distortion is discussed, and we report the first IR spectroscopic data of fullerene trianions, which have been obtained in solution. (Copyright copyright 2014 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

28 CFR 524.42 - Content of progress reports.

Science.gov (United States)

2010-07-01

... mental health, including any significant mental or physical health problems, and any corrective action... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Content of progress reports. 524.42 Section 524.42 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INMATE ADMISSION...

Pressure dependence of the superconducting transition temperature of Rb3C60 up to 20 kbar

International Nuclear Information System (INIS)

Bud'ko, S.L.; Meng, R.L.; Chu, C.W.; Hor, P.H.

1991-01-01

AC susceptibility measurements of Rb 3 C 60 under hydrostatic pressure up to 20 kbar are reported. The superconducting transition temperature (T c ) decreases linearly under pressure with the pressure derivative dT c /dP = -0.78 K degrees/kbar

Structural studies of precursor and partially oxidized conducting complexes. XIII. A neutron diffraction and x-ray diffuse scattering study of the dimerized platinum chain in rubidium tetracyanoplatinate chloride (2:1:0.3) trihydrate, Rb2[Pt(CN)4]Cl03.3.0H2O

International Nuclear Information System (INIS)

Williams, J.M.; Johnson, P.L.; Schultz, A.J.; Coffey, C.C.

1978-01-01

The crystal structure and molecular formula of the one-dimensional conductor Rb 2 [Pt(CN) 4 ]Cl 0 . 30 . 3.0H 2 O, RbCP(Cl), have been fully characterized using single-crystal neutron diffraction, x-ray diffuse scattering data, and thermogravimetric analysis. RbCP(Cl) is isostructural with KCP(Cl) and KCP(Br) except that only one halide site can be identified. From thermogravimetric analyses RbCP(Cl) is a 3.0 hydrate as is KCP(Br). RbCP(Cl) crystallizes in the tetragonal space group P4mm, with unit cell dimensions a = 10.142 (6) A, c = 5.801 (4) A, V/sub c/ = 596.7 A 3 , and Z = 2. Using x-ray diffuse scattering techniques we have established the Pt oxidation as +2.31 (2) from which the molecular formula Rb 2 [Pt(CN) 4 ]Cl/sub 0.31(2)/ . 3.0H 2 O is obtained. The structure consists of nearly planar Pt(CN) 4 moieties stacked along the c axis forming a perfectly linear Pt-Pt chain. The crystal asymmetric unit contains two independent Pt(CN) 4 1 . 7- groups, two H 2 O sites, one Rb + site, and one Cl - site. The asymmetric ordering of the Rb + ion and the H 2 O molecules constitutes the main source of crystal asymmetry. The two-independent Pt-Pt chain distances are definitely unequal (2.877 (8) and 2.924 (8) A) with the average intrachain separation (2.90 A) being slightly longer than in KCP(Br) (2.88 A) and KCP(Cl) (2.87 A). The replacement of K + by Rb + results in lattice expansion along c, which produces larger Pt-Pt intrachain separations. Thus the unequal and slightly longer Pt-Pt separations in RbCP(Cl), apparently result in increased electron localization along the Pt-atom chain and a concomitant decrease in the electrical conductivity. 10 figures, 3 tables

PLC VVVF Elevator Control System

OpenAIRE

Tang, Yujian; Gui, Tianyu

2016-01-01

The aim of the thesis is to introduce the PLC VVVF elevator and its control system. The thesis can be divided into three parts. The first part is about the overview of the lift: the kinds of the lift and the structure of the lift, it shows the knowledge about the components and the operating systems of the lift. The second part is about the PLC control system, it’s about the operations of the lift from the introduction about the hardware and software of the PLC control system. And the thi...

P53 and Rb tumor suppressor gene alterations in gastric cancer Alterações dos genes supressores tumorais p53 e Rb no câncer gástrico

Directory of Open Access Journals (Sweden)

Rejane Mattar

2004-01-01

Full Text Available Inactivation of tumor suppressor genes has been frequently observed in gastric carcinogenesis. Our purpose was to study the involvement of p53, APC, DCC, and Rb genes in gastric carcinoma. METHOD: Loss of heterozygosity of the p53, APC, DCC and Rb genes was studied in 22 gastric cancer tissues using polymerase chain reaction; single-strand conformation polymorphism of the p53 gene exons 5-6 and exons 7-8 was studied using 35S-dATP, and p53 expression was detected using a histological immunoperoxidase method with an anti-p53 clone. RESULTS AND DISCUSSION: No loss of heterozygosity was observed in any of these tumor suppressor genes; homozygous deletion was detected in the Rb gene in 23% (3/13 of the cases of intestinal-type gastric carcinoma. Eighteen (81.8% cases showed band mobility shifts in exons 5-6 and/or 7-8 of the p53 gene. The presence of the p53 protein was positive in gastric cancer cells in 14 cases (63.6%. Normal gastric mucosa showed negative staining for p53; thus, the immunoreactivity was likely to represent mutant forms. The correlation of band mobility shift and the immunoreactivity to anti-p53 was not significant (P = .90. There was no correlation of gene alterations with the disease severity. CONCLUSIONS: The inactivation of Rb and p53 genes is involved in gastric carcinogenesis in our environment. Loss of the Rb gene observed only in the intestinal-type gastric cancer should be further evaluated in association with Helicobacter pylori infection. The p53 gene was affected in both intestinal and diffuse histological types of gastric cancer.A inativação de genes supressores tumorais tem sido freqüentemente observada na carcinogênese gástrica. O nosso objetivo foi estudar o envolvimento dos genes p53, APC, DCC e Rb no câncer gástrico. MÉTODO: Vinte e dois casos de câncer gástrico foram estudados por PCR-LOH (reação de polimerase em cadeia- perda de alelo heterozigoto dos genes p53, APC, DCC e Rb; e por PCR-SSCP (rea

Fatigue behavior of rolled and forged tungsten at 25°, 280° and 480 °C

International Nuclear Information System (INIS)

Habainy, J.; Iyengar, S.; Lee, Y.; Dai, Y.

2015-01-01

Pure tungsten has been chosen as the target material at the European Spallation Source facility in Lund. Calculations show that the target temperature can reach 500 °C momentarily during the spallation process, leading to thermal fatigue. Target life estimations require fatigue data at different temperatures and this work focuses on generating such data for pure, unirradiated, rolled and forged tungsten in the range 25°–480 °C. For specimens oriented in the rolling direction, tensile tests at room temperature indicated Young's modulus values in the range 320–390 GPa, low levels of plasticity (<0.23%) and UTS values in the range 397 MPa (unpolished) and 705 MPa (Polished). UTS for forged specimens were around 500 MPa. Stress-controlled fatigue tests were conducted in the tensile regime, with a runout limit of 2 × 10"6 cycles. At 25 °C, unpolished specimens had fatigue limits of 150 MPa (rolling and transverse direction), and 175 MPa (forged). For polished specimens in the rolling direction, fatigue limits were higher at 237.5 MPa (25 °C) and 252.5 MPa (280 °C). The forged specimens showed slightly better fatigue properties and marginal cyclic hardening at 480 °C. - Highlights: • Stress & strain-controlled fatigue tests on pure tungsten at 25°, 280° & 480 °C. • Unirradiated, rolled and forged specimens in polished and unpolished condition. • Min. tensile strength (MPa): 397 (25 °C), 472 (280 °C) and 363 (480 °C). • Min. endurance limit (MPa): 137.5 (25 °C), 250 (280 °C) and 150 (480 °C). • Marginal cyclic hardening observed at 480 °C.

Modeling a Consistent Behavior of PLC-Sensors

Directory of Open Access Journals (Sweden)

E. V. Kuzmin

2014-01-01

Full Text Available The article extends the cycle of papers dedicated to programming and verificatoin of PLC-programs by LTL-specification. This approach provides the availability of correctness analysis of PLC-programs by the model checking method.The model checking method needs to construct a finite model of a PLC program. For successful verification of required properties it is important to take into consideration that not all combinations of input signals from the sensors can occur while PLC works with a control object. This fact requires more advertence to the construction of the PLC-program model.In this paper we propose to describe a consistent behavior of sensors by three groups of LTL-formulas. They will affect the program model, approximating it to the actual behavior of the PLC program. The idea of LTL-requirements is shown by an example.A PLC program is a description of reactions on input signals from sensors, switches and buttons. In constructing a PLC-program model, the approach to modeling a consistent behavior of PLC sensors allows to focus on modeling precisely these reactions without an extension of the program model by additional structures for realization of a realistic behavior of sensors. The consistent behavior of sensors is taken into account only at the stage of checking a conformity of the programming model to required properties, i. e. a property satisfaction proof for the constructed model occurs with the condition that the model contains only such executions of the program that comply with the consistent behavior of sensors.

Autochthonous tumors driven by Rb1 loss have an ongoing requirement for the RBP2 histone demethylase.

Science.gov (United States)

McBrayer, Samuel K; Olenchock, Benjamin A; DiNatale, Gabriel J; Shi, Diana D; Khanal, Januka; Jennings, Rebecca B; Novak, Jesse S; Oser, Matthew G; Robbins, Alissa K; Modiste, Rebecca; Bonal, Dennis; Moslehi, Javid; Bronson, Roderick T; Neuberg, Donna; Nguyen, Quang-De; Signoretti, Sabina; Losman, Julie-Aurore; Kaelin, William G

2018-04-17

Inactivation of the retinoblastoma gene ( RB1 ) product, pRB, is common in many human cancers. Targeting downstream effectors of pRB that are central to tumorigenesis is a promising strategy to block the growth of tumors harboring loss-of-function RB1 mutations. One such effector is retinoblastoma-binding protein 2 (RBP2, also called JARID1A or KDM5A), which encodes an H3K4 demethylase. Binding of pRB to RBP2 has been linked to the ability of pRB to promote senescence and differentiation. Importantly, genetic ablation of RBP2 is sufficient to phenocopy pRB's ability to induce these cellular changes in cell culture experiments. Moreover, germline Rbp2 deletion significantly impedes tumorigenesis in Rb1 +/- mice. The value of RBP2 as a therapeutic target in cancer, however, hinges on whether loss of RBP2 could block the growth of established tumors as opposed to simply delaying their onset. Here we show that conditional, systemic ablation of RBP2 in tumor-bearing Rb1 +/- mice is sufficient to slow tumor growth and significantly extend survival without causing obvious toxicity to the host. These findings show that established Rb1 -null tumors require RBP2 for growth and further credential RBP2 as a therapeutic target in human cancers driven by RB1 inactivation.

High thermal shock resistance of the hot rolled and swaged bulk W–ZrC alloys

Energy Technology Data Exchange (ETDEWEB)

Xie, Z.M.; Liu, R.; Miao, S.; Yang, X.D. [Key Laboratory of Materials Physics, Institute of Solid State Physics, Hefei Science Center, Chinese Academy of Sciences, Hefei 230031 (China); University of Science and Technology of China, Hefei 230026 (China); Zhang, T., E-mail: zhangtao@issp.ac.cn [Key Laboratory of Materials Physics, Institute of Solid State Physics, Hefei Science Center, Chinese Academy of Sciences, Hefei 230031 (China); University of Science and Technology of China, Hefei 230026 (China); Fang, Q.F.; Wang, X.P. [Key Laboratory of Materials Physics, Institute of Solid State Physics, Hefei Science Center, Chinese Academy of Sciences, Hefei 230031 (China); University of Science and Technology of China, Hefei 230026 (China); Liu, C.S., E-mail: csliu@issp.ac.cn [Key Laboratory of Materials Physics, Institute of Solid State Physics, Hefei Science Center, Chinese Academy of Sciences, Hefei 230031 (China); University of Science and Technology of China, Hefei 230026 (China); Lian, Y.Y. [Southwestern Institute of Physics, Chengdu (China); Liu, X., E-mail: xliu@swip.ac.cn [Southwestern Institute of Physics, Chengdu (China); Luo, G.N. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

2016-02-15

The thermal shock (single shot) resistance and mechanical properties of the W–0.5wt% ZrC (WZC) alloys manufactured by ordinary sintering followed by swaging or rolling process were investigated. No cracks or surface melting were detected on the surface of the rolled WZC alloy plates after thermal shock at a power density of 0.66 GW/m{sup 2} for 5 ms, while primary intergranular cracks appear on the surface of the swaged WZC samples after thermal shock at a power density of 0.44 GW/m{sup 2} for 5 ms. Three point bending tests indicate that the rolled WZC alloy has a flexural strength of ∼2.4 GPa and a total strain of 1.8% at room temperature, which are 100% and 260% higher than those of the swaged WZC, respectively. The fracture energy density of the rolled WZC alloy is 3.23 × 10{sup 7} J/m{sup 3}, about 10 times higher than that of the swaged WZC (2.9 × 10{sup 6} J/m{sup 3}). The high thermal shock resistance of the rolled WZC alloys can be ascribed to their extraordinary ductility and plasticity. - Graphical abstract: (Left panel) surface morphology observed by optical microscope after a single pulse for 5 ms with various absorbed power densities at RT on the rolled WZC. (Right panel) curves of flexural stress versus strain at RT (a) and the calculated fracture energy (b) for the swaged WZC and rolled WZC alloys. - Highlights: • No cracks or surface melting were detected on the rolled WZC alloy samples after thermal shock at 0.66 GW/m{sup 2} for 5 ms. • Hot rolled WZC alloy plates exhibit a flexural strength of 2.4 GPa and a strain of 1.8% at RT. • The fracture energy of the rolled WZC alloy is 3.23 × 10{sup 7} J/m{sup 3} at RT, about 10 times higher than that of the swaged WZC. • A detailed analysis of the relationships between the mechanical properties and the thermal shock resistance is given.

28 CFR 524.76 - Appeals of CIM classification.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Appeals of CIM classification. 524.76..., CLASSIFICATION, AND TRANSFER CLASSIFICATION OF INMATES Central Inmate Monitoring (CIM) System § 524.76 Appeals of CIM classification. An inmate may at any time appeal (through the Administrative Remedy Program) the...

Silica-based PLC with heterogeneously-integrated PDs for one-chip DP-QPSK receiver.

Science.gov (United States)

Kurata, Yu; Nasu, Yusuke; Tamura, Munehisa; Kasahara, Ryoichi; Aozasa, Shinichi; Mizuno, Takayuki; Yokoyama, Haruki; Tsunashima, Satoshi; Muramoto, Yoshifumi

2012-12-10

To realize a DP-QPSK receiver PLC, we heterogeneously integrated eight high-speed PDs on a silica-based PLC platform with a PBS, 90-degree optical hybrids and a VOA. The use of a 2.5%-Δ waveguide reduced the receiver PLC size to 11 mm x 11 mm. We successfully demonstrated 32 Gbaud DP-QPSK signal demodulation with the receiver PLC.

Systems of Na/sup +/NO/sub 3/, Na/sub 2/SO/sub 4/, RbNO/sub 3/, Rb/sub 2/SO/sub 4/-H/sub 2/O and NaNO/sub 3/, Na/sub 2/SO/sub 4/, CsNO/sub 3/, Cs/sub 2/SO/sub 4/-H/sub 2/O at 25 and 75 deg C

Energy Technology Data Exchange (ETDEWEB)

Poletaev, I F; Krasnenkova, L V

1975-08-01

Quaternary Na/sup +/, Rb/sup +///NO/sub 3/-, SO/sub 4//sup 2 -/-H/sub 2/O and Nsub(+), Cs/sup +///NO/sub 3/-, SO/sub 4//sup 2 -/-H/sub 2/O mutual systems have been studied isothermally. The following six fields of crystallization have been revealed in these systems at 25 deg C: Cs/sub 2/SO/sub 4/, Na/sub 2/SO/sub 4/, Na/sub 2/SO/sub 4/x10H/sub 2/O, NaNO/sub 3/xNa/sub 2/SO/sub 4/x2H/sub 2/O, NaNO/sub 3/, and CsNO/sub 3/.

Syntheses and Thermal Behaviors of Rb(FOX-7)·H2O and Cs(FOX-7)·H2O

International Nuclear Information System (INIS)

Luo, Jinan; Xu, Kangzhen; Wang, Min; Ren, Xiaolei; Chen, Yongshun; Song, Jirong; Zhao, Fengqi

2010-01-01

Two new energetic organic alkali metal salts, 1,1-diamino-2,2-dinitroethylene rubidium salt [Rb(FOX-7)·H 2 O] and 1,1- diamino-2,2-dinitroethylene cesium salt [Cs(FOX-7)·H 2 O], were synthesized by reacting of 1,1-diamino-2,2-dinitroethylene (FOX-7) and rubidium chloride or cesium chloride in alkali methanol aqueous solution, respectively. The thermal behaviors of Rb(FOX-7)·H 2 O and Cs(FOX-7)·H 2 O were studied with DSC and TG methods. The critical temperatures of thermal explosion of the two compounds are 216.22 and 223.73 .deg. C, respectively. Specific heat capacities of the two compounds were determined with a micro-DSC method, and the molar heat capacities are 217.46 and 199.47 J mol -1 K -1 at 298.15 K, respectively. The adiabatic times-to-explosion were also calculated to be a certain value of 5.81 - 6.36 s for Rb(FOX-7)·H 2 O, and 9.92 - 10.54 s for Cs(FOX-7)·H 2 O. After FOX-7 becoming alkali metal salts, thermal decomposition temperatures of the compounds heighten with the rise of element period, but thermal decomposition processes become intense

Association analysis of IL10, TNF-α and IL23R-IL12RB2 SNPs with Behçet's disease risk in Western Algeria

Directory of Open Access Journals (Sweden)

Ouahiba eKhaib Dit Naib

2013-10-01

Full Text Available Objective: We have conducted the first study of the association of interleukin (IL-10, tumor necrosis factor alpha (TNF-α and IL23R-IL12RB2 regionSNPswith Behçet's disease (BD in Western Algeria. Methods: A total of 51 BD patients and 96 unrelated controls from West region of Algeria were genotyped by direct sequencing for 11 SNPs including 2 SNPsfrom the IL10 promoter [c.-819T>C (rs1800871, c.-592A>C (rs1800872], 6 SNPs from the TNF-α promoter [c.-1211T>C (rs1799964, c.-1043C>A (rs1800630, c.-1037C>T (rs1799724, c.-556G>A (rs1800750, c.-488G>A (rs1800629 and c.-418G>A (rs361525], and 3 SNPs from the IL23R-IL12RB2 region [g.67747415A>C (rs12119179, g.67740092G>A (rs11209032 and g.67760140T>C (rs924080]. Results: The minor alleles c.-819T and c.-592A were significantly associated with BD (OR= 2.18; 95% CI 1.28-3.73, p = 0.003; whereas, there was weaker association between TNF-αpromoter SNPs or IL23R-IL12RB2 region and disease risk.Conclusion: Unlike the TNF-αand the IL23R-IL12RB2 region SNPs, the two IL10 SNPs were strongly associated with BD. The -819T, and -592A alleles and the -819TT, -819CT, and -592AA and -592CA genotypes seem to be highly involved in the risk of developing of BD in the population of Western Algeria.

Replication of nanopits and nanopillars by roll-to-roll extrusion coating using a structured cooling roll

DEFF Research Database (Denmark)

Murthy, Swathi; Pranov, Henrik; Pedersen, Henrik Chresten

2016-01-01

This paper investigates a novel, very high throughput, roll-to-roll (R2R) process for nanostructuring of polymer foils, called R2R extrusion coating. It has the potential to accelerate the integration of nanostructured materials in consumer products for a variety of applications, including optical....../height of 100 nm. The best replication was achieved in polypropylene, by running at high roller line-speed of 60 m/min, and high cooling roller temperature of 70°C. Replication in other common polymers like polyethylene and polystyrene was not possible for the parameter range used for the investigation......., technical, and functional surfaces and devices. In roll-to-roll extrusion coating, a molten polymer film is extruded through a flat die forming a melt curtain, and then laminated onto a carrier foil. The lamination occurs as the melt curtain is pressed between a cooling roller and a counter roller...

PLC-based mode multi/demultiplexers for mode division multiplexing

Science.gov (United States)

Saitoh, Kunimasa; Hanzawa, Nobutomo; Sakamoto, Taiji; Fujisawa, Takeshi; Yamashita, Yoko; Matsui, Takashi; Tsujikawa, Kyozo; Nakajima, Kazuhide

2017-02-01

Recently developed PLC-based mode multi/demultiplexers (MUX/DEMUXs) for mode division multiplexing (MDM) transmission are reviewed. We firstly show the operation principle and basic characteristics of PLC-based MUX/DEMUXs with an asymmetric directional coupler (ADC). We then demonstrate the 3-mode (2LP-mode) multiplexing of the LP01, LP11a, and LP11b modes by using fabricated PLC-based mode MUX/DEMUX on one chip. In order to excite LP11b mode in the same plane, a PLC-based LP11 mode rotator is introduced. Finally, we show the PLC-based 6-mode (4LP-mode) MUX/DEMUX with a uniform height by using ADCs, LP11 mode rotators, and tapered waveguides. It is shown that the LP21a mode can be excited from the LP11b mode by using ADC, and the two nearly degenerated LP21b and LP02 modes can be (de)multiplexed separately by using tapered mode converter from E13 (E31) mode to LP21b (LP02) mode.

Absorption spectra of thin films of triple compounds in the system RbIPbI2

International Nuclear Information System (INIS)

Yunakova, O.N.; Miloslavskij, V.K.; Ksenofontova, E.V.; Kovalenko, E.N.

2012-01-01

A formation of compounds RbPbI 3 and Rb 4 PbI 6 in the system RbI-PbI 2 is revealed and their absorption spectra are investigated in an energy interval 2-6 eV and a temperatures range 90-500 K. It is established that the low-frequency exciton excitations are localized in PbI 6 4- structural elements of the crystal lattice, they are classified as excitons of intermediate coupling and are of a three-dimensional character in RbPbI 3 and a quasi-two-dimensional one in Rb 4 PbI 6 .

Development of tools for automatic generation of PLC code

CERN Document Server

Koutli, Maria; Rochez, Jacques

This Master thesis was performed at CERN and more specifically in the EN-ICE-PLC section. The Thesis describes the integration of two PLC platforms, that are based on CODESYS development tool, to the CERN defined industrial framework, UNICOS. CODESYS is a development tool for PLC programming, based on IEC 61131-3 standard, and is adopted by many PLC manufacturers. The two PLC development environments are, the SoMachine from Schneider and the TwinCAT from Beckhoff. The two CODESYS compatible PLCs, should be controlled by the SCADA system of Siemens, WinCC OA. The framework includes a library of Function Blocks (objects) for the PLC programs and a software for automatic generation of the PLC code based on this library, called UAB. The integration aimed to give a solution that is shared by both PLC platforms and was based on the PLCOpen XML scheme. The developed tools were demonstrated by creating a control application for both PLC environments and testing of the behavior of the code of the library.

Melatonin potentiates glycine currents through a PLC/PKC signalling pathway in rat retinal ganglion cells.

Science.gov (United States)

Zhao, Wen-Jie; Zhang, Min; Miao, Yanying; Yang, Xiong-Li; Wang, Zhongfeng

2010-07-15

In vertebrate retina, melatonin regulates various physiological functions. In this work we investigated the mechanisms underlying melatonin-induced potentiation of glycine currents in rat retinal ganglion cells (RGCs). Immunofluorescence double labelling showed that rat RGCs were solely immunoreactive to melatonin MT(2) receptors. Melatonin potentiated glycine currents of RGCs, which was reversed by the MT(2) receptor antagonist 4-P-PDOT. The melatonin effect was blocked by intracellular dialysis of GDP-beta-S. Either preincubation with pertussis toxin or application of the phosphatidylcholine (PC)-specific phospholipase C (PLC) inhibitor D609, but not the phosphatidylinositol (PI)-PLC inhibitor U73122, blocked the melatonin effect. The protein kinase C (PKC) activator PMA potentiated the glycine currents and in the presence of PMA melatonin failed to cause further potentiation of the currents, whereas application of the PKC inhibitor bisindolylmaleimide IV abolished the melatonin-induced potentiation. The melatonin effect persisted when [Ca(2+)](i) was chelated by BAPTA, and melatonin induced no increase in [Ca(2+)](i). Neither cAMP-PKA nor cGMP-PKG signalling pathways seemed to be involved because 8-Br-cAMP or 8-Br-cGMP failed to cause potentiation of the glycine currents and both the PKA inhibitor H-89 and the PKG inhibitor KT5823 did not block the melatonin-induced potentiation. In consequence, a distinct PC-PLC/PKC signalling pathway, following the activation of G(i/o)-coupled MT(2) receptors, is most likely responsible for the melatonin-induced potentiation of glycine currents of rat RGCs. Furthermore, in rat retinal slices melatonin potentiated light-evoked glycine receptor-mediated inhibitory postsynaptic currents in RGCs. These results suggest that melatonin, being at higher levels at night, may help animals to detect positive or negative contrast in night vision by modulating inhibitory signals largely mediated by glycinergic amacrine cells in the inner

Using an operating cost model to analyse the selection of aircraft type on short-haul routes

CSIR Research Space (South Africa)

Ssamula, B

2006-08-01

Full Text Available 1998 (Act No 2 of 1998). http://www. gov.za/gazette/acts/1998/a2-98.pdf (30/4/2004). Pyramid Media Group 2003. Commercial aircraft prices. http://www.pyramid.ch/aircr_prices.htm (4/10/2003). Rolls–Royce 2003. Civil aerospace turbofan range. http...:// www.rolls-royce.com/civil/products/turbofans/Default.htm (4/24/2003). Ssamula, B 2004. Developing a cost model for running an airline service. MEng dissertation, University of Pretoria, Pretoria. Stratford, A H1973. Air transport economics...

INDUÇÃO E REGENERAÇÃO DE EMBRIÕES SOMÁTICOS DE CANA-DE-AÇÚCAR RB996961

Directory of Open Access Journals (Sweden)

Rodrigo de Oliveira Almeida

2015-09-01

Full Text Available Sugarcane is a crop widely planted in Brazil because of the economic importance of its products, like sugar and ethanol. Thus, the crop is often inserted in breeding programs. Therefor, the aim of this study was to evaluate the morphogenic response to somatic embryogenesis and somatic embryos regeneration for genotype RB996961. Transversal segments of young leave rolls with 2-3 mm size from plants with 6 to 9 months old were subcultured on solid MS medium supplemented with three concentrations of 2.4-dichlorophenoxyacetic acid (2.4-D for embryogenic callus induction. Better results were obtained using 13.5 or 31.5 µM L-1 of 2.4-D in 45 or 60 days of incubation on induction medium, one to three subculture and 15 to 45 days of incubation on regeneration medium for genotype RB996961. This results show that the protocol used to genotype RB996961 was efficient to somatic embryos production (over 80%, nevertheless, it is necessary to adjust the regeneration approach (62.3 to 73.4%.

Slip-rolling resistance of novel Zr(C,N) thin film coatings under high Hertzian contact pressures

Energy Technology Data Exchange (ETDEWEB)

Manier, Charles-Alix

2010-08-24

Today, coatings are used in many applications ranging from the decoration purposes to the improvement of efficiency such as in machining tools, medical tools, computer devices (hard disks) and many more. Especially the automotive industry anticipates a benefit in using coatings for example in powertrains and gears where the mechanical components are stressed under slip-rolling motion. A cost effective option to increase efficiency is based on the increase of the load carrying capacity by thin film coatings. It would also represent a way towards downsizing. In the work presented here, a small review concerning rolling contact fatigue of coatings was performed. Experimentally it is then shown, that crystalline Zr(C,N) coatings can be slip-rolling resistant at 120 C in factory fill engine oil up to ten million cycles under average Hertzian contact pressures up to P{sub 0mean} = 1.94 GPa (P{sub 0max} = 2.91 GPa). Basically, it represents here the doubling of the normal force acting on the surface compared to uncoated steel traditionally lubricated with fully formulated oil. Typically, the coated substrates are made of the quenched and tempered bearing steel Cronidur 30. The Zr(C,N) coatings were fully characterized using different characterisation techniques in order to understand the difference in slip-rolling resistance under those high tribological demands. Effectively, the slip-rolling resistance of different batches of the Zr(C,N) coatings is evaluated using a defined and powerful testing procedure. Different results of lifetime were achieved without fundamental changes of the deposition procedure. The characterisation achieved permits the identification of microstructural disparities which should affect the load carrying capacity of the coating. Moreover, the efficiency of the high slip-rolling resistant Zr(C,N) coating was considered not only with respect to the improvement of the load carrying capacity of the substrate but also in terms of tribological

Development of tools for automatic generation of PLC code

OpenAIRE

Koutli, Maria; Chasapis, Georgios; Rochez, Jacques

2014-01-01

This Master thesis was performed at CERN and more specifically in the EN-ICE-PLC section. The Thesis describes the integration of two PLC platforms, that are based on CODESYS development tool, to the CERN defined industrial framework, UNICOS. CODESYS is a development tool for PLC programming, based on IEC 61131-3 standard, and is adopted by many PLC manufacturers. The two PLC development environments are, the SoMachine from Schneider and the TwinCAT from Beckhoff. The two CODESYS compatible P...

Reduction behavior of UO{sub 2}{sup 2+} in molten LiCl–RbCl and LiCl–KCl eutectics by using tungsten

Energy Technology Data Exchange (ETDEWEB)

Nagai, Takayuki, E-mail: nagai.takayuki00@jaea.go.jp [Nuclear Fuel Cycle Engineering Lab., Japan Atomic Energy Agency, Muramatsu, Tokai, Naka, Ibaraki 319-1194 (Japan); Uehara, Akihiro; Fujii, Toshiyuki; Yamana, Hajimu [Research Reactor Institute, Kyoto University, Asashironishi, Kumatori, Sen-nan, Osaka 590-0494 (Japan)

2013-08-15

The reduction of uranium from UO{sub 2}{sup 2+} to UO{sub 2}{sup +} or U{sup 4+} in molten LiCl–RbCl and LiCl–KCl eutectics was examined by using tungsten and chlorine gas. Spectrophotometric technique was adopted to determine the concentration of uranium species. When tungsten was immersed into the LiCl–RbCl eutectic melt at 400 °C without supplying chlorine gas, 36% of the total weight of the hexavalent of UO{sub 2}{sup 2+} was reduced to the pentavalent of UO{sub 2}{sup +}. Under purging chlorine gas into the melt, 96% of UO{sub 2}{sup 2+} was reduced to the tetravalent of U{sup 4+}. Tungsten oxy-chloride of WOCl{sub 4} was produced via the reductions of UO{sub 2}{sup 2+}, which was volatized from the melt and adsorbed on the upper part of experimental cell. On the other hand, 84% of UO{sub 2}{sup 2+} in the LiCl–KCl eutectic melt at 500 °C was reduced to U{sup 4+} by using tungsten and chlorine gas.

Optical interconnection for a polymeric PLC device using simple positional alignment.

Science.gov (United States)

Ryu, Jin Hwa; Kim, Po Jin; Cho, Cheon Soo; Lee, El-Hang; Kim, Chang-Seok; Jeong, Myung Yung

2011-04-25

This study proposes a simple cost-effective method of optical interconnection between a planar lightwave circuit (PLC) device chip and an optical fiber. It was conducted to minimize and overcome the coupling loss caused by lateral offset which is due to the process tolerance and the dimensional limitation existing between PLC device chips and fiber array blocks with groove structures. A PLC device chip and a fiber array block were simultaneously fabricated in a series of polymer replication processes using the original master. The dimensions (i.e., width and thickness) of the under-clad of the PLC device chip were identical to those of the fiber array block. The PLC device chip and optical fiber were aligned by simple positional control for the vertical direction of the PLC device chip under a particular condition. The insertion loss of the proposed 1 x 2 multimode optical splitter device interconnection was 4.0 dB at 850 nm and the coupling loss was below 0.1 dB compared with single-fiber based active alignment.

Study of traction rolling-stock using in Lithuanian sector of railway line “Rail Baltica”

Directory of Open Access Journals (Sweden)

Gintautas BUREIKA

2012-01-01

Full Text Available The article analyses the current traction rolling-stock used by „Lietuvos geležinkeliai“ Plc. for freight transportation. The technical data of the above mentioned rolling-stock is explored and compared, and operation costs are estimated in the article. After the assessment of the forecasts of freight flows on the constructed railway „Rail Baltica“, the algorithm for selection of freight locomotives was proposed. The efficiency of the locomotives operated on the railway is determined by three multicriteria evaluation methods: the sum of ratings, simple additive weighting, and the geometric mean method. Locomotives are valued in accordance with technical, economic and ecological parameters. The results of possible effective performance of the rolling stock have been determined by changing coefficient values of the criteria. Finally, basic conclusions are given.

Modernization project of the rod control system and in-core instrumentation system for 34 units of the 900 MW French EDF fleet

International Nuclear Information System (INIS)

Tavolara, Ivan; Desgeorge, Romain; Verburgh, Pierre

2014-01-01

Rolls-Royce and Cegelec, in partnership, carry out a unique and considerable modernisation project of two Instrumentation and Control (I and C) systems for the entire 900 MWe fleet of Electricite De France (EDF). Both rod control (RCS) and reactor in-core measurement (RIC) systems are to be modernised in the frame of the third ten-year renovation of all 34 reactor units over 9 power plants. The RCS contributes to the control of nuclear power by actuating control rod drive mechanisms that allow insertion or withdrawal of control rods. The RCS has also monitoring functions such as controlling the actual rods' position as well as the functional consistency between commands and actual positions. The RIC system measures in-core neutron flux, providing useful information to the control room as well as to the reactor unit computer for further processing. The renovated systems shall replace the existing ageing analog technology by modern digital technology based on PLC (Programmable Logic Controllers) and FPGA (Field-Programmable Gate Array) in the case of power subassemblies of RCS. Both systems rely for certain functions on a common network linking the RCS and RIC networks, improving operations and maintenance thanks to a powerful Man Machine Interface at the different locations of the systems with an extensive suite of tools and diagnostic menus. The project whose design phase started in July 2006 is now in its deployment phase after the successful site implementation of both systems at the first of kind units of Tricastin and Fessenheim power plants, respectively in August 2009 and February 2010. With 20 units in operation in 2014, the deployment shall continue with the other 14 until 2020. Rolls-Royce has a broad range of civil nuclear expertise, including work related to licensing and safety reviews, engineering design, supply chain management, manufacturing, installation and commissioning of the nuclear island systems and equipment, as well as operational

Histamine acting on H1 receptor promotes inhibition of proliferation via PLC, RAC, and JNK-dependent pathways

International Nuclear Information System (INIS)

Notcovich, Cintia; Diez, Federico; Tubio, Maria Rosario; Baldi, Alberto; Kazanietz, Marcelo G.; Davio, Carlos; Shayo, Carina

2010-01-01

It is well established that histamine modulates cell proliferation through the activation of the histamine H1 receptor (H1R), a G protein-coupled receptor (GPCR) that is known to couple to phospholipase C (PLC) activation via Gq. In the present study, we aimed to determine whether H1R activation modulates Rho GTPases, well-known effectors of Gq/G 11 -coupled receptors, and whether such modulation influences cell proliferation. Experiments were carried out in CHO cells stably expressing H1R (CHO-H1R). By using pull-down assays, we found that both histamine and a selective H1R agonist activated Rac and RhoA in a time- and dose-dependent manner without significant changes in the activation of Cdc42. Histamine response was abolished by the H1R antagonist mepyramine, RGS2 and the PLC inhibitor U73122, suggesting that Rac and RhoA activation is mediated by H1R via Gq coupling to PLC stimulation. Histamine caused a marked activation of serum response factor activity via the H1R, as determined with a serum-responsive element (SRE) luciferase reporter, and this response was inhibited by RhoA inactivation with C3 toxin. Histamine also caused a significant activation of JNK which was inhibited by expression of the Rac-GAP β2-chimaerin. On the other hand, H1R-induced ERK1/2 activation was inhibited by U73122 but not affected by C3 or β2-chimaerin, suggesting that ERK1/2 activation was dependent on PLC and independent of RhoA or Rac. [ 3 H]-Thymidine incorporation assays showed that both histamine and the H1R agonist inhibited cell proliferation in a dose-dependent manner and that the effect was independent of RhoA but partially dependent on JNK and Rac. Our results reveal that functional coupling of the H1R to Gq-PLC leads to the activation of RhoA and Rac small GTPases and suggest distinct roles for Rho GTPases in the control of cell proliferation by histamine.

21 CFR 524.1193 - Ivermectin topical solution.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ivermectin topical solution. 524.1193 Section 524...) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS OPHTHALMIC AND TOPICAL DOSAGE FORM NEW ANIMAL DRUGS § 524.1193 Ivermectin topical solution. (a) Specifications. Each milliliter (mL) of solution contains 5 milligrams of...

21 CFR 524.1446 - Milbemycin oxime solution.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Milbemycin oxime solution. 524.1446 Section 524...) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS OPHTHALMIC AND TOPICAL DOSAGE FORM NEW ANIMAL DRUGS § 524.1446 Milbemycin oxime solution. (a) Specifications. Each tube contains 0.25 milliliter of a 0.1 percent solution...

On Construction and Verification of PLC-Programs

Directory of Open Access Journals (Sweden)

E. V. Kuzmin

2012-01-01

Full Text Available We review some methods and approaches to programming discrete problems for Programmable Logic Controllers on the example of constructing PLC-programs for controling a code lock. For these approaches we evaluate the usability of the model checking method for the analysis of program correctness with respect to the automatic verification tool Cadence SMV. Some possible PLC-program vulnerabilities arising at a number approaches to programming of PLC are revealed.

Control Systems of Rubber Dryer Machinery Components Using Programmable Logic Control (PLC)

Science.gov (United States)

Hendra; Yulianto, A. S.; Indriani, A.; Hernadewita; Hermiyetti

2018-02-01

Application of programmable logic control (PLC) is widely used on the control systems in the many field engineering such as automotive, aviation, food processing and other industries [1-2]. PLC is simply program to control many automatic activity, easy to use, flexible and others. PLC using the ladder program to solve and regulated the control system component. In previous research, PLC was used for control system of rotary dryer machine. In this paper PLC are used for control system of motion component in the rubber dryer machinery. Component of rubber dryer machine is motors, gearbox, sprocket, heater, drying chamber and bearing. Principle working of rubber dryer machinery is wet rubber moving into the drying chamber by sprocket. Sprocket is driven by motors that conducted by PLC to moving and set of wet rubber on the drying chamber. Drying system uses greenhouse effect by making hanger dryer design in the form of line path. In this paper focused on motion control system motors and sensors drying rubber using PLC. The results show that control system of rubber dryer machinery can work in accordance control input and the time required to dry the rubber.

Ginsenoside Rb1 Protects Rat Neural Progenitor Cells against Oxidative Injury

Directory of Open Access Journals (Sweden)

Na Ni

2014-03-01

Full Text Available Ginseng, the root of Panax ginseng C.A. Meyer, has been used as a tonic to enhance bodily functions against various ailments for hundreds of years in Far Eastern countries without apparent adverse effects. Ginsenoside Rb1, one of the most active ingredients of ginseng, has been shown to possess various pharmacological activities. Here we report that Rb1 exhibits potent neuroprotective effects against oxidative injury induced by tert-butylhydroperoxide (t-BHP. Lactate dehydrogenase (LDH assay demonstrated that incubation with 300 µm t-BHP for 2.5 h led to a significant cell loss of cultured rat embryonic cortex-derived neural progenitor cells (NPCs and the cell viability was pronouncedly increased by 24 h pretreatment of 10 µm Rb1. TUNEL staining further confirmed that pretreatment of Rb1 significantly reduced the cell apoptosis in t-BHP-induced oxidative injury. Real time PCR revealed that pretreatment with Rb1 activated Nrf2 pathway in cultured NPCs and led to an elevated expression of HO-1. The results of the present study demonstrate that Rb1 shows a potent anti-oxidative effect on cultured NPCs by activating Nrf2 pathway.

Luminescent properties of phosphor converted LED using an orange-emitting Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} phosphor

Energy Technology Data Exchange (ETDEWEB)

Song, Hee Jo; Yim, Dong Kyun [Department of Materials Science and Engineering, College of Engineering, Seoul National University, Daehak-dong, Gwanak-gu, Seoul 151-744 (Korea, Republic of); Cho, In-Sun [Department of Mechanical Engineering, Stanford University, CA 94305 (United States); Roh, Hee-Suk; Kim, Ju Seong [Department of Materials Science and Engineering, College of Engineering, Seoul National University, Daehak-dong, Gwanak-gu, Seoul 151-744 (Korea, Republic of); Kim, Dong-Wan, E-mail: dwkim@ajou.ac.kr [Department of Materials Science and Engineering, Ajou University, Woncheon-dong, San 5, Yeongtong-gu, Suwon 443-749 (Korea, Republic of); Hong, Kug Sun, E-mail: kshongss@plaza.snu.ac.kr [Department of Materials Science and Engineering, College of Engineering, Seoul National University, Daehak-dong, Gwanak-gu, Seoul 151-744 (Korea, Republic of)

2012-12-15

Graphical abstract: Display Omitted Highlights: ► Phase-pure Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} powders were synthesized by a solid state reaction process. ► The optimum emission intensity was observed at the Eu{sup 2+} ion concentration of 0.006. ► The dipole–dipole interaction was the major concentration quenching mechanism. ► The pc-LED coated with Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} had higher CRI than commercial red phosphor. -- Abstract: A series of orange-emitting Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} phosphors were synthesized by a conventional solid-state reaction method. The as-prepared phosphors were characterized by X-ray powder diffraction (XRD), fluorescence spectroscopy, and spectroradiometry. XRD showed that all prepared samples exhibited a monoclinic Rb{sub 2}CaP{sub 2}O{sub 7} phase. Fluorescence spectroscopy showed that the photoluminescence efficiency of Rb{sub 2}Ca{sub 1−x}P{sub 2}O{sub 7}:Eu{sub x}{sup 2+} phosphors increased with increasing Eu{sup 2+} concentration until x = 0.006, then decreased at higher concentrations, due to a concentration quenching effect. The thermal activation energy was also measured to be 0.40 eV. Furthermore, a phosphor-converted LED (pc-LED) coated with Rb{sub 2}Ca{sub 0.994}P{sub 2}O{sub 7}:Eu{sub 0.006}{sup 2+} was fabricated, which exhibited bright orange emission under a forward bias, from 200 to 300 mA. The color rendering index (CRI) of pc-LED coated with Rb{sub 2}Ca{sub 0.994}P{sub 2}O{sub 7}:Eu{sub 0.006}{sup 2+} was higher than the CRI of pc-LED coated with commercial red phosphor, due to the broad emission band of Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} phosphor. In applying with three-band pc-LEDs, moreover, white pc-LED using Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} phosphor had a higher CRI, than using commercial phosphor. These results indicated that Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} phosphor could be a good candidate for a near-UV based w-LED.

Usage of Wifi Technology for PLC Programming

Directory of Open Access Journals (Sweden)

Jaromír ŠKUTA

2009-06-01

Full Text Available This contribution describes usage of WIFI technology for programming and parameterization of application in PLC. INSYS WLAN unit from the Microelectronics INSYS Corporation is the base of application. Software access point with using USB WIFI component WL167 is running in industrial PC. Particular PC clients are connecting into network infrastructure PLC by the help of this access point and INSYS WLAN unit. This connection allows configuring and uploading program into this PLC.

Phase transitions in Rb2UBr6 observed by neutron powder diffraction

International Nuclear Information System (INIS)

Maletka, K.; Ressouche, E.; Tellgren, R.; Delaplane, R.; Szczepaniak, W.; Rycerz, L.; Zablocka-Malecka, M.

1997-01-01

The behaviour of the Rb 2 UBr 6 ionic conductor is studied as a function of the temperature by neutron powder diffraction. The low- room and high temperature structures have been determined. At low temperature range 4.2-80 K the compound crystallizes in a monoclinic unit cell with P2 1 /c space group. Among 80 and 853 K the compound crystallizes in a tetragonal unit cell with space group P4/mnc. At 300 K the lattice constants are; a = b 7,745(1), c = 11.064(1) A. At the temperature range 853-960 K is observed the trigonal phase with P-3m1 space group. Above the phase transitions occurring at 960 K the compound crystallizes in the cubic unit cell with Fm3m space group. (author)

The tumor suppressor Rb and its related Rbl2 genes are regulated by Utx histone demethylase

Energy Technology Data Exchange (ETDEWEB)

Terashima, Minoru; Ishimura, Akihiko; Yoshida, Masakazu [Division of Functional Genomics, Cancer Research Institute, Kanazawa University, Kakuma-machi, Kanazawa 920-1192, Ishikawa (Japan); Suzuki, Yutaka; Sugano, Sumio [Graduate School of Frontier Sciences, The University of Tokyo, Kashiwa 277-8561, Chiba (Japan); Suzuki, Takeshi, E-mail: suzuki-t@staff.kanazawa-u.ac.jp [Division of Functional Genomics, Cancer Research Institute, Kanazawa University, Kakuma-machi, Kanazawa 920-1192, Ishikawa (Japan)

2010-08-20

Research highlights: {yields} Utx increases expression of Rb and Rbl2 genes through its demethylase activity. {yields} Utx changes histone H3 methylation on the Rb and Rbl2 promoters. {yields} Utx induces decreased cell proliferation of mammalian primary cells. -- Abstract: Utx is a candidate tumor suppressor gene that encodes histone H3 lysine 27 (H3K27) demethylase. In this study, we found that ectopic expression of Utx enhanced the expression of retinoblastoma tumor suppressor gene Rb and its related gene Rbl2. This activation was dependent on the demethylase activity of Utx, and was suggested to contribute to the decreased cell proliferation induced by Utx. A chromatin immunoprecipitation assay showed that over-expressed Utx was associated with the promoter regions of Rb and Rbl2 resulting in the removal of repressive H3K27 tri-methylation and the increase in active H3K4 tri-methylation. Furthermore, siRNA-mediated knockdown of Utx revealed the recruitment of endogenous Utx protein on the promoters of Rb and Rbl2 genes. These results indicate that Rb and Rbl2 are downstream target genes of Utx and may play important roles in Utx-mediated cell growth control.

Synthesis and Characterization of the Ternary Thiobismuthates A9Bi13S24 (A = K, Rb)

KAUST Repository

Davaasuren, Bambar

2016-11-16

Ternary alkali metal thiobismuthates ABiS (A = K, Rb) were synthesized by direct combination reactions at 650 °C. The compounds crystallize in the monoclinic space group C2/m (no. 12) with cell parameters a = 30.919(1) Å, b = 4.1008(2) Å, c = 20.9072(9) Å, β = 105.826(3)° for KBiS (1) and a = 31.823(6) Å, b = 4.1177(8) Å, c = 21.086(4) Å, β = 105.62(3)° for RbBiS (2). The crystal structure of 1 contains a 3D [KBiS] polyanionic framework, whereas 2 consists of 2D [RbBiS] polyanionic slabs stacked along [201]. Both 1 and 2 are semiconductors with a band gap of 1.4 and 1.3 eV, respectively, which is supported by an electronic structure calculation. 1 melts congruently at 580 °C, while 2 melts incongruently at 575 °C. 1 and 2 are airstable and insoluble in water and organic solvents.

Microbial transformation of ginsenoside Rb1 to compound K by Lactobacillus paralimentarius.

Science.gov (United States)

Quan, Lin-Hu; Kim, Yeon-Ju; Li, Guan Hao; Choi, Kwang-Tea; Yang, Deok-Chun

2013-06-01

In this study, the major ginsenoside Rb1 was transformed into the more pharmacologically active minor compound K by food grade Lactobacillus paralimentarius LH4, which was isolated from kimchi, a traditional Korean fermented food. The enzymatic reaction was analyzed by TLC, HPLC, and NMR. Using the cell-free enzyme of Lactobacillus paralimentarius LH4 at optimal conditions for 30 °C at pH 6.0, 1.0 mg ml(-1) ginsenoside Rb1 was transformed into 0.52 mg ml(-1) compound K within 72 h, with a corresponding molar conversion yield of 88 %. The cell-free enzyme hydrolyzed the two glucose moieties attached to the C-3 position and the outer glucose moiety attached to the C-20 position of the ginsenoside Rb1. The cell-free enzyme hydrolyzed the ginsenoside Rb1 along the following pathway: ginsenoside Rb1 → gypenoside XVII and ginsenoside Rd → ginsenoside F2 → compound K. Our results indicate that Lactobacillus paralimentarius LH4 has the potential to be applied for the preparation of compound K in the food industry.

Structure of RbAlAs[sub 2]O[sub 7]. Structure de RbAlAs[sub 2]O[sub 7

Energy Technology Data Exchange (ETDEWEB)

Boughzala, H. (Dept. de Chimie, Faculte des Sciences, Tunis (Tunisia)); Driss, A. (Dept. de Chimie, Faculte des Sciences, Tunis (Tunisia)); Jouini, T. (Dept. de Chimie, Faculte des Sciences, Tunis (Tunisia))

1993-03-15

Rubidium aluminium pyroarsenate, M[sub r]=374.29, triclinic, P anti 1, a=8.233(5), b=6.34(2), c=6.241(5) A, [alpha]=102.6(1), [beta]=103.89(7), [gamma]=96.7(1) , V=303.9 A[sup 3], Z=2, D[sub m]=3.9(3) (pycnometry), D[sub x]=4.09 g cm[sup -3], [lambda](Ag K anti [alpha])=0.5608 A, [mu]=108.14 cm[sup -1], F(000)=344, T=296 K, R=0.049, wR=0.053 for 2193 reflections. The first structural investigation on a pyroarsenate is reported. It is built from AlAs[sub 2]O[sub 11] units comprising one AlO[sub 6] octahedron and one As[sub 2]O[sub 7] pyroarsenate group in which two AsO[sub 4] tetrahedra point in opposite directions. These units are connected by heteropolyhedral linkages to form a three-dimensional framework having intersecting tunnels where the Rb[sup +] ions are located. Although this structure is not isotypic with the phosphate analogues, it is closely related to that of the pyrophosphates of type I represented by KAlP[sub 2]O[sub 7]. (orig.).

Construction of Rb charge exchange cell and characteristic experiment for He- ion production

International Nuclear Information System (INIS)

Lee, Hee Seock; Bak, Jun Gyo; Bak, Hae Ill

1991-01-01

The Rb charge exchange cell is constructed as the He - ion source of the SNU 1.5-MV Tandem Van de Graaff accelerator. the characteristic experiments is carried out in order to determine the optimum operational conditions of the cell. The He + ion beam with the energy of 1 - 10 keV, extracted from the duoplasmatron ion source, is passed through the Rb vapor to become He - ions by the two step charge exchange reaction, i.e., He + + Rb → He o* + Rb + and He o* + Rb → He - + Rb + . From the experimental results, it is found that the maximum fractional yield of He - ions is produced at He + /ion energy of 7 keV. The optimum temperatures of the oven and the canal are determined to be 370 deg C and 95 deg C respectively. Under the optimum operational condition the maximum fractional yield of He - ions is 2.42 ± 0.02 5. This charge exchange cell is proved to be an effective system for the production of He - ions. (Author)

Functional ablation of pRb activates Cdk2 and causes antiestrogen resistance in human breast cancer cells.

Directory of Open Access Journals (Sweden)

Hemant Varma

2007-12-01

Full Text Available Estrogens are required for the proliferation of hormone dependent breast cancer cells, making estrogen receptor (ER positive tumors amenable to endocrine therapies such as antiestrogens. However, resistance to these agents remains a significant cause of treatment failure. We previously demonstrated that inactivation of the retinoblastoma protein (pRb family tumor suppressors causes antiestrogen resistance in MCF-7 cells, a widely studied model of estrogen responsive human breast cancers. In this study, we investigate the mechanism by which pRb inactivation leads to antiestrogen resistance. Cdk4 and cdk2 are two key cell cycle regulators that can phosphorylate and inactivate pRb, therefore we tested whether these kinases are required in cells lacking pRb function. pRb family members were inactivated in MCF-7 cells by expressing polyomavirus large tumor antigen (PyLT, and cdk activity was inhibited using the cdk inhibitors p16(INK4A and p21(Waf1/Cip1. Cdk4 activity was no longer required in cells lacking functional pRb, while cdk2 activity was required for proliferation in both the presence and absence of pRb function. Using inducible PyLT cell lines, we further demonstrated that pRb inactivation leads to increased cyclin A expression, cdk2 activation and proliferation in antiestrogen arrested cells. These results demonstrate that antiestrogens do not inhibit cdk2 activity or proliferation of MCF-7 cells in the absence of pRb family function, and suggest that antiestrogen resistant breast cancer cells resulting from pRb pathway inactivation would be susceptible to therapies that target cdk2.

Properties of K,Rb-intercalated C60 encapsulated inside carbon nanotubes called peapods derived from nuclear magnetic resonance

KAUST Repository

Mahfouz, Remi; Bouhrara, M.; Kim, Y.; Wå gberg, T.; Goze-Bac, C.; Abou-Hamad, Edy

2015-01-01

We present a detailed experimental study on how magnetic and electronic properties of Rb,K-intercalated C60 encapsulated inside carbon nanotubes called peapods can be derived from 13C nuclear magnetic resonance investigations. Ring currents do play

Seal Technology in Gas Turbine Engines

Science.gov (United States)

1978-08-01

the case inner wall (Fig.. 6 (a) and 7 (a)) und for shrouded rotors between blade shroud and the came (Figs. 6() snd 7(b)) (b) Blade roots and platforms ...work is required to fully validate these rig tests. Abradable coatings and linings used in turbines, produce wear of the fins on the root platforms ...Division of Rolls-Royce Limited for their permission to publish. ILI w% C - IL I L 2-10 1’t 00z It. ’K 0 0 ý - -C u -4% uj % z. 9 0 < m m wz I- 10 wIx u 2

Activity of L-alpha-amino acids at the promiscuous goldfish odorant receptor 5.24

DEFF Research Database (Denmark)

Christiansen, Bolette; Wellendorph, Petrine; Bräuner-Osborne, Hans

2006-01-01

The goldfish odorant receptor 5.24 is a member of family C of G protein-coupled receptors and is closely related to the human receptor GPRC6A. Receptor 5.24 has previously been shown to have binding affinity for L-alpha-amino acids, especially the basic amino acids arginine and lysine. Here we...

NEXT GENERATION TURBINE SYSTEM STUDY

Energy Technology Data Exchange (ETDEWEB)

Frank Macri

2002-02-28

Rolls-Royce has completed a preliminary design and marketing study under a Department of Energy (DOE) cost shared contract (DE-AC26-00NT40852) to analyze the feasibility of developing a clean, high efficiency, and flexible Next Generation Turbine (NGT) system to meet the power generation market needs of the year 2007 and beyond. Rolls-Royce evaluated the full range of its most advanced commercial aerospace and aeroderivative engines alongside the special technologies necessary to achieve the aggressive efficiency, performance, emissions, economic, and flexibility targets desired by the DOE. Heavy emphasis was placed on evaluating the technical risks and the economic viability of various concept and technology options available. This was necessary to ensure the resulting advanced NGT system would provide extensive public benefits and significant customer benefits without introducing unacceptable levels of technical and operational risk that would impair the market acceptance of the resulting product. Two advanced cycle configurations were identified as offering significant advantages over current combined cycle products available in the market. In addition, balance of plant (BOP) technologies, as well as capabilities to improve the reliability, availability, and maintainability (RAM) of industrial gas turbine engines, have been identified. A customer focused survey and economic analysis of a proposed Rolls-Royce NGT product configuration was also accomplished as a part of this research study. The proposed Rolls-Royce NGT solution could offer customers clean, flexible power generation systems with very high efficiencies, similar to combined cycle plants, but at a much lower specific cost, similar to those of simple cycle plants.

Inactivation of human osteosarcoma cells in vitro by 211At-TP-3 monoclonal antibody: Comparison with astatine-211 and external-beam X rays

International Nuclear Information System (INIS)

Larsen, R.H.; Bruland, O.S.; Hoff, P.; Alstad, J.; Lindmo, T.; Rofstad, E.K.

1994-01-01

The potential usefulness of α-particle radioimmunotherapy in the treatment of osteosarcoma was studied in vitro by using the monoclonal antibody TP-3 and cells of three human osteosarcoma cell lines (OHS, SAOS and KPDX) differing in antigen expression. Cell survival curves were established after treatment with (a) 211 At-TP-3 of different specific activities, (b) 211 At-labeled bovine serum albumin (BSA), (c) free 211 At and (d) external-beam X rays. The three osteosarcoma cell lines showed similar survival curves, whether treated with external-beam X rays, 211 At-BSA or free 211 At. The D o 's were lower for free 211 At than for 211 At-BSA. The survival curves for 211 At-TP-3 treatment, on the other hand, differed significantly among the cell lines, suggesting that sensitivity to 211 At-TP-3 treatment was governed by cellular properties other than sensitivity to external-beam X rays. The cellular property most important for sensitivity to 211 At-TP-3 treatment was the antigen expression. Cell inactivation after 211 At-TP-3 treatment increased substantially with increasing specific activity of the 211 At-TP-3. At high specific activities, the cytotoxic effect of 211 At-TP-3 was significantly higher than that of 211 At-BSA. In conclusion, 211 At-TP-3 has the potential to give clinically favorable therapeutic ratios in the treatment of osteosarcoma. 39 refs., 5 figs., 2 tabs

Spectroscopy of the hghest Rb2 bound states with 10 kHz precision

NARCIS (Netherlands)

Verhaar, B.J.; Kokkelmans, S.J.J.M.F.; van Kempen, E.G.M.; Freeland, R.S.; Wynar, R.; Comparat, D.; Ryu, C.; Heinzen, D.J.

2001-01-01

We have measured the binding energy of four of the highest bound vibrational levels of the ground electronic states of the ^87Rb2 molecule with a precision better than 10 kHz. The measurements were carried out using stimulated Raman photoassociation in an ^87Rb Bose-Einstein condensate. We have

Large Area 2D and 3D Colloidal Photonic Crystals Fabricated by a Roll-to-Roll Langmuir-Blodgett Method.

Science.gov (United States)

Parchine, Mikhail; McGrath, Joe; Bardosova, Maria; Pemble, Martyn E

2016-06-14

We present our results on the fabrication of large area colloidal photonic crystals on flexible poly(ethylene terephthalate) (PET) film using a roll-to-roll Langmuir-Blodgett technique. Two-dimensional (2D) and three-dimensional (3D) colloidal photonic crystals from silica nanospheres (250 and 550 nm diameter) with a total area of up to 340 cm(2) have been fabricated in a continuous manner compatible with high volume manufacturing. In addition, the antireflective properties and structural integrity of the films have been enhanced via the use of a second roll-to-roll process, employing a slot-die coating of an optical adhesive over the photonic crystal films. Scanning electron microscopy images, atomic force microscopy images, and UV-vis optical transmission and reflection spectra of the fabricated photonic crystals are analyzed. This analysis confirms the high quality of the 2D and 3D photonic crystals fabricated by the roll-to-roll LB technique. Potential device applications of the large area 2D and 3D colloidal photonic crystals on flexible PET film are briefly reviewed.

Microstructural and mechanical responses to various rolling speeds determined in multi-pass break-down rolling of AZ31B alloy

Science.gov (United States)

Jia, Weitao; Tang, Yan; Ning, Fangkun; Le, Qichi; Cui, Jianzhong

2018-04-01

Different rolling operations of as-cast AZ31B alloy were performed under different rolling speed (18 ∼ 72 m min‑1) and rolling pass conditions at 400 °C. Microstructural studies, tensile testing and formability evaluation relevant to each rolling operation were investigated. For 1-pass rolling, coarse average grain size (CAGS) region gradually approached the center layer as the rolling speed increased. Moreover, twins, shear bands and coarse-grain structures were the dominant components in the microstructure of plates rolled at 18, 48 and 72 m min‑1, respectively, indicating the severe deformation inhomogeneity under the high reduction per pass condition. For 2-pass rolling and 4-pass rolling, dynamic recrystallization was observed to be well and CAGS region has substantially disappeared, indicating the significant improvement in deformation uniformity and further the grain homogenization under the conditions. Microstructure uniformity degree of 2-pass rolled plates did not vary much as the rolling speed varied. On this basis, shear band distribution dominated the deformation behavior during the uniaxial tension of the 2-pass rolled plates. However, microstructure uniformity accompanied by twin distribution played a leading role in stretching the 4-pass rolled plates.

Perovskite solar cells for roll-to-roll fabrication

Directory of Open Access Journals (Sweden)

Uddin Ashraf

2017-01-01

Full Text Available Perovskite solar cell (PSCs is considered as the game changer in emerging photovoltaics technology. The highest certified efficiency is 22% with high temperature processed (∼500 °C TiO2 based electron transport layer (ETL. High temperature process is a rudimentary hindrance towards roll-to-roll processing of PSCs on flexible substrates. Low temperature solution process (<150 °C ZnO based ETL is one of the most promising candidate for large scale roll-to-roll fabrication of cells as it has nearly identical electron affinity (4.2 eV of TiO2. The mixed organic perovskite (MA0.6FA0.4PbI3 devices with Al doped ZnO (AZO ETL demonstrate average cell efficiency over 16%, which is the highest ever reported efficiency for this device configuration. The energy level alignment and related interfacial charge transport dynamics at the interface of ZnO and perovskite films and the adjacent charge transport layers are investigated. Significantly improved device stability, hysteresis free device photocurrent have been observed in MA0.6FA0.4PbI3 cells. A systematic electrochemical impedance spectroscopy, frequency dependent capacitance spectra, surface morphology and topography characterization have been conducted to understand the role of interfacial electronic properties between perovskite and neighbouring layers in perovskite device. A standardized degradation study, interfacial electronic property and capacitive spectra analysis of aged device, have been measured to understand the enhanced device stability in mixed MA0.6FA0.4PbI3 cells. Slow perovskite material decomposition rate and augmented device lifetime with AZO based devices have been found to be correlated with the more hydrophobic and acidic nature of AZO surface compared to pristine ZnO film.

Booster vaccination with safe, modified, live-attenuated mutants of Brucella abortus strain RB51 vaccine confers protective immunity against virulent strains of B. abortus and Brucella canis in BALB/c mice.

Science.gov (United States)

Truong, Quang Lam; Cho, Youngjae; Kim, Kiju; Park, Bo-Kyoung; Hahn, Tae-Wook

2015-11-01

Brucella abortus attenuated strain RB51 vaccine (RB51) is widely used in prevention of bovine brucellosis. Although vaccination with this strain has been shown to be effective in conferring protection against bovine brucellosis, RB51 has several drawbacks, including residual virulence for animals and humans. Therefore, a safe and efficacious vaccine is needed to overcome these disadvantages. In this study, we constructed several gene deletion mutants (ΔcydC, ΔcydD and ΔpurD single mutants, and ΔcydCΔcydD and ΔcydCΔpurD double mutants) of RB51 with the aim of increasing the safety of the possible use of these mutants as vaccine candidates. The RB51ΔcydC, RB51ΔcydD, RB51ΔpurD, RB51ΔcydCΔcydD and RB51ΔcydCΔpurD mutants exhibited significant attenuation of virulence when assayed in murine macrophages in vitro or in BALB/c mice. A single intraperitoneal immunization with RB51ΔcydC, RB51ΔcydD, RB51ΔcydCΔcydD or RB51ΔcydCΔpurD mutants was rapidly cleared from mice within 3 weeks, whereas the RB51ΔpurD mutant and RB51 were detectable in spleens until 4 and 7 weeks, respectively. Vaccination with a single dose of RB51 mutants induced lower protective immunity in mice than did parental RB51. However, a booster dose of these mutants provided significant levels of protection in mice against challenge with either the virulent homologous B. abortus strain 2308 or the heterologous Brucella canis strain 26. In addition, these mutants were found to induce a mixed but T-helper-1-biased humoral and cellular immune response in immunized mice. These data suggest that immunization with a booster dose of attenuated RB51 mutants provides an attractive strategy to protect against either bovine or canine brucellosis.

Small atomic displacements in the molybdenophosphates AMo2P3O12 (A = K, Rb, Tl)

International Nuclear Information System (INIS)

Leclaire, A.; Raveau, B.

1988-01-01

KMo 2 P 3 O 12 , M r = 515.90, orthorhombic, Pbnm, a = 17.6398(14), b = 9.1761(4), c = 12.3000(8) A, V = 1990.9(4) A 3 , Z=8, D x = 3.44 Mg m -3 , λ(Mo Kα) = 0.71069 A, μ = 3.42 mm -1 , F(000) = 1952. T = 294 K, R = 0.028 for 2123 reflections. RbMo 2 P 3 O 12 , M r = 562.26, orthorhombic, Pbcm, a = 8.8314(8), b = 9.2368(7), c = 12.3051(9) A, V = 1003.8(4) A 3 , Z=4, D x = 3.72 Mg m -3 , λ(Mo Kα) = 0.71069 A, μ = 8.08 mm -1 , F(000) = 1048, T = 294 K, R = 0.044 for 2073 reflections. The Mo 2 P 3 O 12 frameworks of the K, Rb and Tl compounds are almost the same. The main difference is in the position of the alkaline-earth ions in the tunnels, which induces, in the potassium compound, a superstructure along a. The alkaline-earth ions are slightly displaced as their size decreases in order that the A-O distances may agree with the sum of the ionic radii. (orig.)

SpinlineTM, Benefits of a nuclear specific safety-critical digital I/C platform - 15102

International Nuclear Information System (INIS)

Duthou, A.; Mouly, P.; Jegou, H.

2015-01-01

Spinline TM is Rolls-Royce modular and digital solution dedicated to developing and/or upgrading safety I/C used in nuclear reactors. From the start, Spinline TM was specifically designed for Nuclear applications. Therefore, its architecture and components satisfy, from design, the most stringent safety standards required by the local Safety authorities, while they can be adapted to various types of reactors. This is a significant advantage over suppliers who tried to adapt industrial systems to the Nuclear constraints and faced unexpected delays and costs to meet Safety authorities requirements. Spinline TM was specifically designed to implement any Class 1E and category A IEC-61226 safety I/C functions. It is qualified according to European and French nuclear standard and more recently by the US NRC, notably thanks to its Fail-safe features, deterministic behavior and Physical and Functional Separation. In 2011 EDF chose Spinline TM as its safety I/C systems technology for the modernization of 20 units of its 1300 MW PWR fleet

Application of PLC in irradiation controlling system

International Nuclear Information System (INIS)

Qin Wenjuan; Lin Baoling; Wang Mingtao; Huang Daorong; Yao Qiuguo; Gao Weixiang; Yang Kun; Xue Changlin; Pu Jiangling

2005-01-01

To deal with the multiprogramming controlling system and computer gathering and printing measure data in Irradiation Station, we adopted Programmable Logic Controller (brief: PLC) instead of PCB to control Irradiation System. PLC improved the anti-jamming ability and debugged for convenience. (authors)

Automated Formal Verification for PLC Control Systems

CERN Multimedia

Fernández Adiego, Borja

2014-01-01

Programmable Logic Controllers (PLCs) are widely used devices used in industrial control systems. Ensuring that the PLC software is compliant with its specification is a challenging task. Formal verification has become a recommended practice to ensure the correctness of the safety-critical software. However, these techniques are still not widely applied in industry due to the complexity of building formal models, which represent the system and the formalization of requirement specifications. We propose a general methodology to perform automated model checking of complex properties expressed in temporal logics (e.g. CTL, LTL) on PLC programs. This methodology is based on an Intermediate Model (IM), meant to transform PLC programs written in any of the languages described in the IEC 61131-3 standard (ST, IL, etc.) to different modeling languages of verification tools. This approach has been applied to CERN PLC programs validating the methodology.

Evidence of three-body correlation functions in Rb+ and Sr2+ acetonitrile solutions

Science.gov (United States)

D'Angelo, P.; Pavel, N. V.

1999-09-01

The local structure of Sr2+ and Rb+ ions in acetonitrile has been investigated by x-ray absorption spectroscopy (XAS) and molecular dynamics simulations. The extended x-ray absorption fine structure above the Sr and Rb K edges has been interpreted in the framework of multiple scattering (MS) formalism and, for the first time, clear evidence of MS contributions has been found in noncomplexing ion solutions. Molecular dynamics has been used to generate the partial pair and triangular distribution functions from which model χ(k) signals have been constructed. The Sr2+ and Rb+ acetonitrile pair distribution functions show very sharp and well-defined first peaks indicating the presence of a well organized first solvation shell. Most of the linear acetonitrile molecules have been found to be distributed like hedgehog spines around the Sr2+ and Rb+ ions. The presence of three-body correlations has been singled out by the existence of well-defined peaks in the triangular configurations. Excellent agreement has been found between the theoretical and experimental data enforcing the reliability of the interatomic potentials used in the simulations. These results demonstrate the ability of the XAS technique in probing the higher-order correlation functions in solution.

A Faraday laser lasing on Rb 1529 nm transition.

Science.gov (United States)

Chang, Pengyuan; Peng, Huanfa; Zhang, Shengnan; Chen, Zhangyuan; Luo, Bin; Chen, Jingbiao; Guo, Hong

2017-08-21

We present the design and performance characterization of a Faraday laser directly lasing on the Rb 1529 nm transition (Rb, 5P 3/2  - 4D 5/2 ) with high stability, narrow spectral linewidth and low cost. This system does not need an additional frequency-stabilized pump laser as a prerequisite to preparing Rb atom from 5S to 5P excited state. Just by using a performance-improved electrodeless discharge lamp-based excited-state Faraday anomalous dispersion optical filter (LESFADOF), we realized a heterogeneously Faraday laser with the frequency corresponding to atomic transition, working stably over a range of laser diode (LD) current from 85 mA to 171 mA and the LD temperature from 11 °C to 32 °C, as well as the 24-hour long-term frequency fluctuation range of no more than 600 MHz. Both the laser linewidth and relative intensity noisy (RIN) are measured. The Faraday laser lasing on Rb 1529 nm transition (telecom C-band) can be applied to further research on metrology, microwave photonics and optical communication systems. Besides, since the transitions correspongding to the populated excited-states of alkali atoms within lamp are extraordinarily rich, this scheme can increase the flexibility for choosing proper wavelengths for Faraday laser and greatly expand the coverage of wavelength corresponding to atomic transmission for laser frequency stabilization.

RB1CC1 Protein Suppresses Type II Collagen Synthesis in Chondrocytes and Causes Dwarfism*

Science.gov (United States)

Nishimura, Ichiro; Chano, Tokuhiro; Kita, Hiroko; Matsusue, Yoshitaka; Okabe, Hidetoshi

2011-01-01

RB1-inducible coiled-coil 1 (RB1CC1) functions in various processes, such as cell growth, differentiation, senescence, apoptosis, and autophagy. The conditional transgenic mice with cartilage-specific RB1CC1 excess that were used in the present study were made for the first time by the Cre-loxP system. Cartilage-specific RB1CC1 excess caused dwarfism in mice without causing obvious abnormalities in endochondral ossification and subsequent skeletal development from embryo to adult. In vitro and in vivo analysis revealed that the dwarf phenotype in cartilaginous RB1CC1 excess was induced by reductions in the total amount of cartilage and the number of cartilaginous cells, following suppressions of type II collagen synthesis and Erk1/2 signals. In addition, we have demonstrated that two kinds of SNPs (T-547C and C-468T) in the human RB1CC1 promoter have significant influence on the self-transcriptional level. Accordingly, human genotypic variants of RB1CC1 that either stimulate or inhibit RB1CC1 transcription in vivo may cause body size variations. PMID:22049074

Design and construction of automatic operating system of double chamber plasma nitriding device PLC based

International Nuclear Information System (INIS)

Saminto; Slamet Santosa; Eko Priyono

2012-01-01

The automatic operating system of double chamber plasma nitriding device has been done. The system is used for operating double chamber plasma nitriding automatically as according to the standard operating procedure by pressing push button on the human machine interface (HMI). The system consists of hardware and software. The hardware was constructed using main components T100MD1616+ PLC module and supported by temperature signal conditioner module, Wheatstone bridge module, isolated amplifier module and EMS 30A H Bridge motor driver module. A software program that is planted on T100MD1616+ PLC using ladder diagrams and Tbasic program. Test system functions performed by inserting a set values of temperature and pressure by pressing the button on the human machine interface (HMI). The test results show that the temperature control with a set of values 100 °C obtained stable coverage of 98 °C to 102 °C, (Δ ± 2 °C) with a 2% tolerance and the output voltage of the DAC is 2.436 volts to 2.913 volts. The pressure control with a set of values 2.169 x 10 -1 mbar obtained stable coverage of 1.995 x 10 -1 mbar to 2.205 x 10 -1 mbar, (Δ ± 0.105 x 10 -1 mbar) with a 5% tol. (author)

Synthesis of leucite, sanidine and a melt of sanidine at 930-10300C and 2 Kb: partition coefficients of Rb, Ca, Sr and Ba between these phases and hydrothermal solution of KCl. Geological utilizations

International Nuclear Information System (INIS)

Moreira, A.H.P.

1988-01-01

This work shows the results of hydrothermal experiments to determine the distribution coefficients of alcali and alcaline earth elements in trace concentrations between sanidine and liquids of same composition and between leucite and liquid. At 2 Kb pressure and 930 0 C for sanidine, 930 0 and 1030 0 C for leucite and 1030 0 C for a melt of sanidine composition the concentration of trace elements (TE) in the coexisting potassium bearing aqueous fluid phase was varied between 10 -1 to 10 -6 mole to one mol of K + . By use of radioactive tracers (Rb 86 , Ca 45 , Sr 85 , Ba 133 ) the concentrations in TE of the aqueous phase, the solids and melts has been determined. This indirect method will give a good aproximation of the behaviour of TE between a melt and crystallising solids. These aprotimations lead to following conclusions: a) during the crystallisation of leucite, this phase incorporates large quantities of Ba and Rb, depleting the residual melt in those elements. Sr and Ca, on the other hand are enriched in the residual melt. b) the crystallisation of sanidine depletes even more the residual melt in Ba, Sr shows similias behaviour, Rb and Ca, however, are enriched in the residual melt phase. (author) [pt

Cold-rolled steel strip X-ray thickness gauge

International Nuclear Information System (INIS)

Tong Jianmin; Cong Peng; Li Litao

2010-01-01

This paper introduces a cold-rolled steel strip X-ray thickness gauge. This gauge uses two-detector construction including penetrating ionization chamber and measuring ionization chamber. Standard magazine box is composed of three rotating plates driving by stepper motor, including 13 pieces of standard sample to build up 154 thickness value, obtaining standard sample curve covering thickness range of 0.1 mm to 5 mm. Automation system include Siemens S7-200 PLC as key controlling unit, embedded controlling system for data acquisition and computing, and PC as man-machine interface, and employ Ethernet (TCP/IP) or RS485/232 as communication protocol. Reversing Cold mill AGC closed-loop control operation test demonstrates that the gauge can adapt to the severe production environment, operate stably and reliably, measurement precision can reached to ±0.19%, reproducibility to ±0.09%, and stability to ±0.06%, response time range from 4 ms to 200 ms and be adjustable. So it can meet the high demanding of cold-rolled plate/strip production. (authors)

Epitaxial YBa2Cu3O7 films on rolled-textured metals for high temperature superconducting applications

International Nuclear Information System (INIS)

Norton, D.P.; Park, C.; Prouteau, C.

1998-04-01

The epitaxial growth of high temperature superconducting (HTS) films on rolled-textured metal represents a viable approach for long-length superconducting tapes. Epitaxial, 0.5 microm thick YBa 2 Cu 3 O 7 (YBCO) films with critical current densities, J c , greater than 1 MA/cm 2 have been realized on rolled-textured (001) Ni tapes with yttria-stabilized zirconia (YSZ)/CeO 2 oxide buffer layers. This paper describes the synthesis using pulsed-laser deposition (PLD) of epitaxial oxide buffer layers on biaxially-textured metal that comprise the so-called rolling-assisted biaxially-textured substrates (RABiTs trademark). The properties of the buffer and YBa 2 Cu 3 O 7 films on rolled-textured Ni are discussed, with emphasis given to the crystallographic and microstructural properties that determine the superconducting properties of these multilayer structures

A Classification of PLC Models and Applications

NARCIS (Netherlands)

Mader, Angelika H.; Boel, R.; Stremersch, G.

In the past years there is an increasing interest in analysing PLC applications with formal methods. The first step to this end is to get formal models of PLC applications. Meanwhile, various models for PLCs have already been introduced in the literature. In our paper we discuss several

Activation of Adenosine Receptor A2A Increases HSC Proliferation and Inhibits Death and Senescence by Down-regulation of p53 and Rb

Directory of Open Access Journals (Sweden)

Md. Kaimul eAhsan

2014-04-01

Full Text Available Background & Aims: During fibrosis hepatic stellate cells (HSC undergo activation, proliferation and senescence but the regulation of these important processes is poorly understood. The adenosine A2A receptor (A2A is known to be present on HSC, and its activation results in liver fibrosis. In this study, we tested if A2A has a role in the regulation of HSC proliferation, apoptosis, senescence, and the relevant molecular mechanism.Methods: The ability of adenosine to regulate p53 and Rb protein levels, proliferation, apoptosis and senescence was tested in the human HSC cell line LX-2 and rat primary HSC.Results: Adenosine receptor activation down-regulates p53 and Rb protein levels, increases BrdU incorporation and increases cell survival in LX-2 cells and in primary rat HSC. These effects of NECA were reproduced by an adenosine A2A receptor specific agonist (CGS21680 and blocked by a specific antagonist (ZM241385. By day twenty-one of culture primary rat HSC entered senescence and expressed -gal which was significantly inhibited by NECA. Furthermore, NECA induced down regulation of p53 and Rb and Rac1, and decreased phosphorylation of p44-42 MAP Kinase in LX-2 cells and primary rat HSC. These effects were reproduced by the cAMP analog 8-Bromo-cAMP, and the adenylyl cyclase activator forskolin, and were blocked by PKA inhibitors.Conclusions: These results demonstrate that A2A receptor regulates a number of HSC fate decisions and induces greater HSC proliferation, reduces apoptosis and senescence by decreasing p53 and Rb through cAMP-PKA/Rac1/p38 MAPK pathway. This provides a mechanism for adenosine induced HSC regulation and liver fibrosis.

PLC control of 50 MW klystron modulators

International Nuclear Information System (INIS)

Shang Lei; Liu Gongfa; Chen Liping; Lu Yeming; Hong Jun; Zhang Yi; Zhao Feng

2004-01-01

Upgrade project of the 50 MW klystron modulators of Hefei Light Source (HLS) was firstly introduced. PLC control system of modulators was employed to replace the old control and monitor system, which was based on relay logic circuit and manual operation method. the PLC system becomes a sub system of the new EPICS control system of HLS. Constant-current, switch-mode and high voltage power supplies were adopted to replace the old 50 Hz power supplies. The technology of modulators was improved and operation was more reliable. The design method, hardware and software of PLC control of modulators were described and the performance was presented. (authors)

The Integration of DCS I/O to an Existing PLC

Science.gov (United States)

Sadhukhan, Debashis; Mihevic, John

2013-01-01

At the NASA Glenn Research Center (GRC), Existing Programmable Logic Controller (PLC) I/O was replaced with Distributed Control System (DCS) I/O, while keeping the existing PLC sequence Logic. The reason for integration of the PLC logic and DCS I/O, along with the evaluation of the resulting system is the subject of this paper. The pros and cons of the old system and new upgrade are described, including operator workstation screen update times. Detail of the physical layout and the communication between the PLC, the DCS I/O and the operator workstations are illustrated. The complex characteristics of a central process control system and the plan to remove the PLC processors in future upgrades is also discussed.

Effect of shear stress on 86Rb+ efflux and cytosolic Ca2+ of calf pulmonary artery endothelial cells (CPAEs)

International Nuclear Information System (INIS)

Alevriadou, B.R.; Mo, M.; Rickman, D.S.; Eskin, S.G.; McIntire, L.V.; Schilling, W.P.

1991-01-01

The effect of flow-induced shear stress (SS) on membrane K + permeability and cytosolic free Ca 2+ , [Ca 2+ ] i , was investigated by measuring 86 Rb + efflux and fura-2 fluorescence in CPAEs using a parallel plate flow chamber. Increasing SS from 1 to 2.4, 4.8 or 10 dyn/cm 2 produced a graded, transient increase in 86 Rb + efflux which peaked within 1 min and subsequently declined rapidly towards pre-stimulus levels. Mathematical modeling confirmed that the transient increase in 86 Rb + efflux did not reflect a washout phenomenon. Upon returning SS to 1 dyn/cm 2 , 86 Rb + efflux initially decreased, but returned slowly to basal values. In contrast, application of bradykinin (BK) at a constant SS of either 0.33 or 1 dyn/cm 2 produced a transient increase in 86 Rb + efflux that was followed by a sustained elevated phase during which time efflux gradually returned to pre-stimulus levels. To determine the mechanism by which shear stress increases K + permeability, the effect of tetrabutylammonium ion (TBA), a selective inhibitor of Ca 2+ -dependent K + channels (K Ca ), on both the BK- and SS-induced increases in 86 Rb + efflux, was examined. TBA inhibited the BK-stimulated increase in 86 Rb + efflux >90% under both stationary and flow conditions and significantly reduced SS-dependent 86 Rb + efflux 38.3%. These results suggest that increased 86 Rb + efflux from CPAEs with SS occurs, at least in part, via K Ca and suggests that SS increases cytosolic Ca 2+ . However, when measured using fura-2-loaded CPAEs, SS was without significant effect on [Ca 2+ ] i

39 CFR 211.4 - Interim personnel regulations.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Interim personnel regulations. 211.4 Section 211.4... under the Postal Reorganization Act. (b) Continuation of Personnel Provisions of Former title 39, U.S.C... collective bargaining agreement under the Postal Reorganization Act, all provisions of former title 39, U.S.C...

IL12RB2 gene is associated with the age of type 1 diabetes onset in Croatian family Trios.

Directory of Open Access Journals (Sweden)

Marina Pehlić

Full Text Available BACKGROUND: Common complex diseases are influenced by both genetic and environmental factors. Many genetic factors overlap between various autoimmune diseases. The aim of the present study is to determine whether four genetic variants known to be risk variants for several autoimmune diseases could be associated with an increased susceptibility to type 1 diabetes mellitus. METHODS AND FINDINGS: We genotyped four genetic variants (rs2358817, rs1049550, rs6679356, rs9865818 within VTCN1, ANXA11, IL12RB2 and LPP genes respectively, in 265 T1DM family trios in Croatian population. We did not detect association of these polymorphisms with T1DM. However, quantitative transmission disequilibrium test (QTDT, orthogonal model revealed a significant association between the age of onset of T1DM and IL12RB2 rs6679356 variant. An earlier onset of T1DM was associated with the rs6679356 minor dominant allele C (p = 0.005. The association remained significant even after the Bonferroni correction for multiple testing and permutation. CONCLUSIONS: Variants originally associated with juvenile idiopathic arthritis (VTCN1 gene, sarcoidosis (ANXA11 gene, primary biliary cirrhosis (IL12RB2 gene and celiac disease (LPP gene were not associated with type 1 diabetes in our dataset. Nevertheless, association of IL12RB2 rs6679356 polymorphism with the age of T1DM onset suggests that this gene plays a role in defining the time of disease onset.

MathWorks Simulink and C++ integration with the new VLT PLC-based standard development platform for instrument control systems

Science.gov (United States)

Kiekebusch, Mario J.; Di Lieto, Nicola; Sandrock, Stefan; Popovic, Dan; Chiozzi, Gianluca

2014-07-01

ESO is in the process of implementing a new development platform, based on PLCs, for upcoming VLT control systems (new instruments and refurbishing of existing systems to manage obsolescence issues). In this context, we have evaluated the integration and reuse of existing C++ libraries and Simulink models into the real-time environment of BECKHOFF Embedded PCs using the capabilities of the latest version of TwinCAT software and MathWorks Embedded Coder. While doing so the aim was to minimize the impact of the new platform by adopting fully tested solutions implemented in C++. This allows us to reuse the in house expertise, as well as extending the normal capabilities of the traditional PLC programming environments. We present the progress of this work and its application in two concrete cases: 1) field rotation compensation for instrument tracking devices like derotators, 2) the ESO standard axis controller (ESTAC), a generic model-based controller implemented in Simulink and used for the control of telescope main axes.

Effects of La2O3 Content and Rolling on Microstructure and Mechanical Properties of ODS Molybdenum Alloys

Science.gov (United States)

Ma, Jingling; Li, Wuhui; Wang, Guangxin; Li, Yaqiong; Guo, Hongbo; Zhao, Zeliang; Li, Wei

2017-10-01

In order to study the effects of La2O3 content and rolling on microstructure and mechanical properties of Mo-La2O3 alloys, Mo-0.5% (1%) La2O3 alloys were prepared by liquid-solid doping technique, subsequently rolled either by a single-direction rolling or a cross-rolling. As a result, three different materials were prepared for this study. After being annealed at 1800 °C, the single-directionally rolled Mo-1% La2O3 alloy shows the best mechanical properties in terms of strength, hardness, and sagging deformation among the three materials. This is attributed to the observation that the alloy is only recovered with a microstructure of subgrains and dislocations. The single-directionally rolled Mo-0.5% La2O3 exhibits the worst mechanical property among the three materials. In this material, coarse grains, but no subgrains and dislocations, can be observed after annealing, indicating that it is fully recrystallized. For the cross-rolled Mo-1% La2O3 alloy, grains of dispersed sizes, but no dislocations, are visible after annealing, implying that this alloy is partially recrystallized. Accordingly, the mechanical property of this material is in between the other two materials. Thus, the mechanical properties of the three materials can be well understood based on OM, SEM, and TEM results. Overall, the single-directionally rolled Mo-1% La2O3 alloy possesses good mechanical properties and is more suitable for high-temperature applications.

Calibration of RB reactor power; Kalibrisanje snage reaktora RB

Energy Technology Data Exchange (ETDEWEB)

Sotic, O; Markovic, H; Ninkovic, M; Strugar, P; Dimitrijevic, Z; Takac, S; Stefanovic, D; Kocic, A; Vranic, S [Boris Kidric Institute of Nuclear Sciences Vinca, Beograd (Yugoslavia)

1976-09-15

The first and only calibration of RB reactor power was done in 1962, and the obtained calibration ratio was used irrespective of the lattice pitch and core configuration. Since the RB reactor is being prepared for operation at higher power levels it was indispensable to reexamine the calibration ratio, estimate its dependence on the lattice pitch, critical level of heavy water and thickness of the side reflector. It was necessary to verify the reliability of control and dosimetry instruments, and establish neutron and gamma dose dependence on reactor power. Two series of experiments were done in June 1976. First series was devoted to tests of control and dosimetry instrumentation and measurements of radiation in the RB reactor building dependent on reactor power. Second series covered measurement of thermal and epithermal neuron fluxes in the reactor core and calculation of reactor power. Four different reactor cores were chosen for these experiments. Reactor pitches were 8, 8{radical}2, and 16 cm with 40, 52 and 82 fuel channels containing 2% enriched fuel. Obtained results and analysis of these results are presented in this document with conclusions related to reactor safe operation.

Microstructure, mechanical properties and stretch formability of Mg-3Al-0.5Ca-0.2Gd alloy processed at various finish rolling temperatures

Science.gov (United States)

Kang, Qiang; Jiang, Haitao; Zhang, Yun

2018-04-01

Effects of various finish rolling temperatures on the microstructure, texture, mechanical properties and stretch formability of rolled and annealed Mg-3Al-0.5Ca-0.2Gd (wt%) alloy were investigated in this paper, and it was found that compared with grain size and second phase particles, the basal textures, tensile properties and stretch formability Mg-3Al-0.5Ca-0.2Gd alloy are more sensitive to the increasing finishing rolling temperature. For the rolled and annealed Mg-3Al-0.5Ca-0.2Gd alloy, their grains barely grow up and second phase particles are slightly coarsened, while their basal poles are obviously weakened and tilted with increasing finish rolling temperature. Consequently, the weakened and RD-tilted basal textures are beneficial to the gradually improved elongation and stretch formability of Mg-3Al-0.5Ca-0.2Gd alloy. It is investigated that the gradually activated non-basal slips, e. g. 〈c 〉, 〈c + a〉 dislocations due to the increasing finish rolling temperature could contribute to the weakened RD-tilted textures in rolled and annealed Mg-3Al-0.5Ca-0.2Gd alloy.

86Rb Distribution in the Lung of the Rabbit with Pneumothorax

International Nuclear Information System (INIS)

Huh, Kap To

1972-01-01

86 Rb uptake of some organs and tissues, eg. both lungs, both renal cortices. small intestine, liver and skeletal muscle were studied in the control and the rabbit subjected to pneumothorax. 86 Rb in the form of chloride mixed with physiological saline was intravenously injected. The doses were 100 μc for a rabbit. The rabbits were sacrificed at intervals of 10, 20, 40, and 60 seconds after the injection of 86 Rb, by the injection of saturated KCI solution. After scarification, the organ and tissue sample were quickly removed. 86 Rb uptake in gm of the organs and tissues were measured. On the basis of uptake value, administered doses and body weight, % dose/gm tissues per 200 gm body weight was calculated. Followings were the results: 1. Pneumothorax resulted in a marked elevation in 86 Rb uptake value of collapsed lung and returned to normal level lately. 2. Contralateral lung of pneumothorax also showed marked elevation in 86 Rb uptake value and recovered to normal level. 3. Initial 86 Rb uptake value of liver, small intestine of the rabbit with pneumothorax showed some elevation as compared to control, but that of late stage were similar with control. 4. Local blood flow determination by means of 86 Rb uptake were inadequate in the collapsed lung of pneumothorax. 5. It was suggested that the mechanism for the initial elevation of 86 Rb uptake value in each organs and tissue were different from each other.

Realizace úzkopásmových PLC modemů

OpenAIRE

Kubíček, Lukáš

2012-01-01

Diplomová práce se věnuje úzkopásmové technologii přenosu dat el. sítí NN (PLC) a~možnostem jejího využití v senzorových sítích. Zabývá se jak strukturou a základními vlastnostmi PLC standardu, tak možnostmi jeho uplatnění v praxi. Hlavní částí této práce je realizace PLC sítě pomocí IO ST7570 firmy STMicroelectronics. Jako příklad praktického využití PLC technologie je tato síť připojena k počítači, ve kterém jsou data ze senzoru (wattmetru) připojenému k PLC modemu ukládána pomocí aplikace ...

Interplay between temperature gradients field and C - E transformation in solidifying rolls

Directory of Open Access Journals (Sweden)

W. Wołczyński

2009-07-01

Full Text Available At first step of simulation a temperature field for solidifying cast steel and cast iron roll has been performed. The calculation does not take into account the convection in the liquid since convection has no influence on the proposed model for the localization of the C-E (columnar to equiaxed grains transformation. However, it allows to study the dynamics of temperature field temporal behavior in the middle of a mould. It is postulated that for the C-E transition a full accumulation of the heat in the mould has been observed (plateau at the T(t curve. The temporal range of plateau existence corresponds to the incubation time for the full equiaxed grains formation. At the second step of simulation temporal behavior of the temperature gradient field has been studied. Three ranges within temperature gradients field have been distinguished for the operating point situated at the middle of mould: a/ for the formation of columnar grains zone, ( and high temperature gradient 0>>T&0//>>∂∂−∂∂∂∂−∂∂>EttEtrTrT. T - temperature, r - roll radius. It is evident that the heat transfer across the mould decides on the temporal appearance of incubation during which the solidification is significantly arrested and competition between columnar and equiaxed growth occurs. Moreover solidification with positive temperature gradient transforms into solidification with negative temperature gradient (locally after the incubation. A simulation has been performed for the cast steel and cast iron rolls solidifying as in industry condition. Since the incubation divides the roll into to parts (first with columnar structure, second with equiaxed structure some experiments dealing with solidification have been made in laboratory scale. Finally, observations of the macrosegregation or microsegregation and phase or structure appearance in the cast iron ingot / roll (made in laboratory has also been done in order to confront them with theoretical predictions

Effects of the process temperature and rolling speed on the thermal roll-to-roll imprint lithography of flexible polycarbonate film

International Nuclear Information System (INIS)

Sohn, Ki-Ju; Lee, Woo Il; Park, Jae Hong; Jang, Hyun-Ik; Lee, Dong-Eon

2013-01-01

Thermal roll-to-roll imprint lithography (R2RIL) is a simple and low-cost process for the mass production of micro/nanopatterns. However, in that it relies on highly viscous thermoplastic resists, it is limited in its ability to imprint precise patterns at a high speed. Moreover, the concentrated imprint force applied in R2RIL can damage the resist material which is structurally vulnerable at high process temperatures. Therefore, it is important to understand the temperature- and time-dependent characteristics of the resist material as well as the imprinting mechanism when using thermal R2RIL. In this work, the effects of the process temperature and rolling speed on thermal R2RIL of polycarbonate (PC) films were investigated to improve the process efficiency. Micro-scale line patterns were successfully transferred onto PC films from nickel (Ni) mold stamps. Consequently, line patterns with widths in the range of 5–80 µm were achieved at a traveling speed of 28.6 mm s –1 and process temperature of 150 °C, which is just above the glass transition temperature (T g ). In addition, the patterning performance was investigated for different temperatures, rolling speeds and pattern sizes. The imprinted pattern profiles were measured by an alpha-step surface profiler to investigate the patterning performance. The results show that a much better imprint performance was achieved at 150 °C, compared to the result at temperatures below T g . The physical mechanisms of thermal R2RIL on a PC film were studied by a finite-element analysis and the patterning process was successfully demonstrated by a visco-plastic deformation model. (paper)

PLC based control system for RAM assembly test facility

International Nuclear Information System (INIS)

Kulkarni, S.S.; Kumar, Vinaya; Chandra, Umesh

1994-01-01

The flexibility, expandability, ease of programming and diagnostic features makes the programmable logic controller (PLC) suitable for a variety of control applications in engineering system test facilities. A PLC based control system for RAM assembly test facility (RATF) and for testing the related hydraulic components is being developed and installed at BARC. This paper describes the approach taken for meeting the control requirements and illustrates the PLC software that has been developed. (author). 1 fig

Purification and Characterization of a Ginsenoside Rb1-Hydrolyzing β-Glucosidase from Aspergillus niger KCCM 11239

Directory of Open Access Journals (Sweden)

Kyung Hoon Chang

2012-09-01

Full Text Available Rb1-hydrolyzing β-glucosidase from Aspergillus niger KCCM 11239 was studied to develop a bioconversion process for minor ginsenosides. The specific activity of the purified enzyme was 46.5 times greater than that of the crude enzyme. The molecular weight of the native enzyme was estimated to be approximately 123 kDa. The optimal pH of the purified enzyme was pH 4.0, and the enzyme proved highly stable over a pH range of 5.0–10.0. The optimal temperature was 70 °C, and the enzyme became unstable at temperatures above 60 °C. The enzyme was inhibited by Cu2+, Mg2+, Co2+, and acetic acid (10 mM. In the specificity tests, the enzyme was found to be active against ginsenoside Rb1, but showed very low levels of activity against Rb2, Rc, Rd, Re, and Rg1. The enzyme hydrolyzed the 20-C,β-(1→6-glucoside of ginsenoside Rb1 to generate ginsenoside Rd and Rg3, and hydrolyzed 3-C,β-(1→2-glucoside to generate F2. The properties of the enzyme indicate that it could be a useful tool in biotransformation applications in the ginseng industry, as well as in the development of novel drug compounds.

Effect of Reduction in Thickness and Rolling Conditions on Mechanical Properties and Microstructure of Rolled Mg-8Al-1Zn-1Ca Alloy

Directory of Open Access Journals (Sweden)

Yuta Fukuda

2017-01-01

Full Text Available A cast Mg-8Al-1Zn-1Ca magnesium alloy was multipass hot rolled at different sample and roll temperatures. The effect of the rolling conditions and reduction in thickness on the microstructure and mechanical properties was investigated. The optimal combination of the ultimate tensile strength, 351 MPa, yield strength, 304 MPa, and ductility, 12.2%, was obtained with the 3 mm thick Mg-8Al-1Zn-1Ca rolled sheet, which was produced with a roll temperature of 80°C and sample temperature of 430°C. This rolling process resulted in the formation of a bimodal structure in the α-Mg matrix, which consequently led to good ductility and high strength, exclusively by the hot rolling process. The 3 mm thick rolled sheet exhibited fine (mean grain size of 2.7 μm and coarse grain regions (mean grain size of 13.6 μm with area fractions of 29% and 71%, respectively. In summary, the balance between the strength and ductility was enhanced by the grain refinement of the α-Mg matrix and by controlling the frequency and orientation of the grains.

Ground-state hyperfine splitting for Rb, Cs, Fr, Ba+, and Ra+

Science.gov (United States)

Ginges, J. S. M.; Volotka, A. V.; Fritzsche, S.

2017-12-01

We have systematically investigated the ground-state hyperfine structure for alkali-metal atoms 87Rb,133Cs, and 211Fr and alkali-metal-like ions +135Ba and +225Ra, which are of particular interest for parity violation studies. The quantum electrodynamic one-loop radiative corrections have been rigorously evaluated within an extended Furry picture employing core-Hartree and Kohn-Sham atomic potentials. Moreover, the effect of the nuclear magnetization distribution on the hyperfine structure intervals has been studied in detail and its uncertainty has been estimated. Finally, the theoretical description of the hyperfine structure has been completed with full many-body calculations performed in the all-orders correlation potential method.

43 CFR 2.11 - Why is it important to send my request to the right office?

Science.gov (United States)

2010-10-01

... the right office? 2.11 Section 2.11 Public Lands: Interior Office of the Secretary of the Interior RECORDS AND TESTIMONY; FREEDOM OF INFORMATION ACT Requests for Records under the FOIA § 2.11 Why is it important to send my request to the right office? The bureau and office FOIA Contacts listed in appendix A...

76 FR 80430 - Rio Tinto plc and Rio Tinto Limited; Notice of Application

Science.gov (United States)

2011-12-23

... plc and Rio Tinto Limited; Notice of Application December 19, 2011. AGENCY: Securities and Exchange Commission (``Commission''). ACTION: Notice of application under section 3(b)(2) and 45(a) of the Investment Company Act of 1940 (the ``Act''). SUMMARY: Summary of Application: Rio Tinto plc (``RTP'') and Rio Tinto...

82Sr--82Rb radioisotope generator

International Nuclear Information System (INIS)

Grant, P.M.; Erdal, B.R.; O'Brien, H.A.

1976-01-01

An improved 82 Sr- 82 Rb radioisotope generator system, based upon the complexing ion exchange resin Chelex-100, has been developed. Columns of this material can be easily and rapidly milked, and the Rb-Sr separation factor for a fresh generator was found to be greater than 10 7 . Approximately 80 percent of the 82 Rb present was delivered in a 15-ml volume of aqueous 0.2 M NH 4 Cl solution. After more than 6 liters of eluant had been put through the generator, the Rb-Sr separation factor was still observed to be greater than 10 5 , and no unusual strontium breakthrough behavior was seen in the system over nearly three 82 Sr half lives. 2 claims, no drawings

Reaction of Rb and oxygen overlayers with single-crystalline Bi2Sr2CaCu2O/sub 8+//sub δ/ superconductors

International Nuclear Information System (INIS)

Lindberg, P.A.P.; Shen, Z.; Wells, B.O.; Dessau, D.S.; Mitzi, D.B.; Lindau, I.; Spicer, W.E.; Kapitulnik, A.

1989-01-01

Single crystals of Bi 2 Sr 2 CaCu 2 O/sub 8+//sub δ/ superconductors, in situ cleaved and modified by Rb and oxygen overlayers, have been studied using ultraviolet and x-ray photoemission spectroscopy. The core-level results show that Rb strongly reacts with the Bi and O states, while the Cu and Sr states are left unchanged. This observation strongly indicates that the Bi-O plane forms the surface layer. Subsequent exposure to oxygen results in new oxygen states at the surface as monitored by the O 1s core-level data. For both Rb and oxygen overlayers the valence-band spectra are severely altered. In particular, new valence-band states, presumably of oxygen character, are formed

The application of PLC in 60Co container inspection system

International Nuclear Information System (INIS)

Huang Yibin; Xiang Xincheng

2001-01-01

The author discusses the interlock technique of 60 Co container inspection system, and introduces the hardware structure and program of interlock control system using PLC. Due to adopting PLC distributed control, the system works stably and reliably. The successful application of PLC in 60 Co container inspection system has some use for reference in nuclear technology field

Parameters Evaluation of PLC Dependability and Safety

Directory of Open Access Journals (Sweden)

Juraj Zdansky

2006-01-01

Full Text Available This paper is focused on evaluation of dependability and safety parameters of PLC (Programmable Logic Controller. Achievement of requested level of these parameters is an application assumption for using PLC in control of safety critical processes. Evaluation of these parameters can be made on the base of suitable model and it can be influenced by system architecture when necessary.

Automated turn pike using PLC and SCADA

Science.gov (United States)

Silpa Sreedhar, P.; Aiswarya, P.; Kathirvelan, J.

2017-11-01

We propose a smart turnpike based on Programmable Logic Controller (PLC) and Supervisory Control and Data Acquisition Systems (SCADA) in this paper. In this work, the basic idea is to measure the weight of the vehicles and classify them according to its weight to the respective lanes. It is difficult for the turnpike people to monitor the whole process all the time. So, this PLC based diversion system can be implemented in turnpikes to reduce the difficulties. This method will work based on weight sensors (piezo-resistive) whose output will be fed to a PLC, which will control the vehicle diversion. Using SCADA software, the whole process can be monitored from a remote area. The algorithm developed in this successfully installed in real time system.

Power Line Communication (PLC) in Space - Current Status and Outlook

Science.gov (United States)

Wolf, J.

2012-05-01

The Power Line Communication (PLC) technology as known from various terrestrial applications, e.g. in building automation, in the automotive sector and on aircraft, appears to be a promising technology for the use on spacecraft. Starting from a critical overview on existing terrestrial PLC applications with their pros and cons, the paper gives a motivation for the introduction of the PLC technology on spacecraft, discusses the potential areas where it can be applied and is highlighting the potential problem areas. A short overview of on-going ESA PLC activities is provided and an outlook is given.

14 CFR 67.211 - Cardiovascular.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Cardiovascular. 67.211 Section 67.211 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN MEDICAL STANDARDS AND CERTIFICATION Second-Class Airman Medical Certificate § 67.211 Cardiovascular. Cardiovascular...

Identification of the Elusive Mammalian Enzyme Phosphatidylcholine-Specific Phospholipase C

Science.gov (United States)

2015-09-01

Summary of Results. Task 1. To identify mammalian PC- PLC . Based on results published by other groups, we proposed to identify candidate PC- PLC mRNAs by...establishing the role of the elusive mammalian protein, phosphatidycholine- specific phospholipase C (PC- PLC ) in the inflammatory processes involved in...progression of rheumatoid arthritis (RA). Thus, the main scopes of this proposal are: 1. to identify the PC- PLC gene and protein; and 2. to test PC- PLC

Phospholipase C produced by Clostridium botulinum types C and D: comparison of gene, enzymatic, and biological activities with those of Clostridium perfringens alpha-toxin.

Science.gov (United States)

Fatmawati, Ni Nengah Dwi; Sakaguchi, Yoshihiko; Suzuki, Tomonori; Oda, Masataka; Shimizu, Kenta; Yamamoto, Yumiko; Sakurai, Jun; Matsushita, Osamu; Oguma, Keiji

2013-01-01

Clostridium botulinum type C and D strains recently have been found to produce PLC on egg yolk agar plates. To characterize the gene, enzymatic and biological activities of C. botulinum PLCs (Cb-PLCs), the cb-plc genes from 8 strains were sequenced, and 1 representative gene was cloned and expressed as a recombinant protein. The enzymatic and hemolytic activities of the recombinant Cb-PLC were measured and compared with those of the Clostridium perfringens alpha-toxin. Each of the eight cb-plc genes encoded a 399 amino acid residue protein preceded by a 27 residue signal peptide. The protein consists of 2 domains, the N- and C-domains, and the overall amino acid sequence identity between Cb-PLC and alpha-toxin was greater than 50%, suggesting that Cb-PLC is homologous to the alpha-toxin. The key residues in the N-domain were conserved, whereas those in the C-domain which are important in membrane interaction were different than in the alpha-toxin. As expected, Cb-PLC could hydrolyze egg yolk phospholipid, p-nitrophenylphosphorylcholine, and sphingomyelin, and also exhibited hemolytic activity;however, its activities were about 4- to over 200-fold lower than those of alpha-toxin. Although Cb-PLC showed weak enzymatic and biological activities, it is speculated that Cb-PLC might play a role in the pathogenicity of botulism or for bacterial survival.

Applying Model Checking to Industrial-Sized PLC Programs

CERN Document Server

AUTHOR|(CDS)2079190; Darvas, Daniel; Blanco Vinuela, Enrique; Tournier, Jean-Charles; Bliudze, Simon; Blech, Jan Olaf; Gonzalez Suarez, Victor M

2015-01-01

Programmable logic controllers (PLCs) are embedded computers widely used in industrial control systems. Ensuring that a PLC software complies with its specification is a challenging task. Formal verification has become a recommended practice to ensure the correctness of safety-critical software but is still underused in industry due to the complexity of building and managing formal models of real applications. In this paper, we propose a general methodology to perform automated model checking of complex properties expressed in temporal logics (\\eg CTL, LTL) on PLC programs. This methodology is based on an intermediate model (IM), meant to transform PLC programs written in various standard languages (ST, SFC, etc.) to different modeling languages of verification tools. We present the syntax and semantics of the IM and the transformation rules of the ST and SFC languages to the nuXmv model checker passing through the intermediate model. Finally, two real cases studies of \\CERN PLC programs, written mainly in th...

CFD analysis of the impingement cooling effect of the coolant jet caused by the T56 1st stage disc metering hole

CSIR Research Space (South Africa)

Snedden, Glen C

2003-09-01

Full Text Available conditions applied is given in Figure 2. Figures 3 to 7 give an overview of the final mesh and some idea of the block structured approach and refinement in the main area of interest, that is, the impingement zone and metering holes at the lower part... OF THE IMPINGEMENT COOLING EFFECT OF THE COOLANT JET CAUSED BY THE T56 1ST STAGE DISC METERING HOLE ISABE-2003-1065 Glen C. Snedden CSIR, Defencetek, P O Box 395 Pretoria, 0001, South Africa Tony Lambert Rolls-Royce Indianapolis, Indiana, USA Abstract...

Maximal COX-2 and ppRb expression in neurons occurs during early Braak stages prior to the maximal activation of astrocytes and microglia in Alzheimer's disease

Directory of Open Access Journals (Sweden)

Arendt Thomas

2005-11-01

Full Text Available Abstract Neuronal expression of cyclooxygenase-2 (COX-2 and cell cycle proteins is suggested to contribute to neurodegeneration during Alzheimer's disease (AD. The stimulus that induces COX-2 and cell cycle protein expression in AD is still elusive. Activated glia cells are shown to secrete substances that can induce expression of COX-2 and cell cycle proteins in vitro. Using post mortem brain tissue we have investigated whether activation of microglia and astrocytes in AD brain can be correlated with the expression of COX-2 and phosphorylated retinoblastoma protein (ppRb. The highest levels of neuronal COX-2 and ppRb immunoreactivity are observed in the first stages of AD pathology (Braak 0–II, Braak A. No significant difference in COX-2 or ppRb neuronal immunoreactivity is observed between Braak stage 0 and later Braak stages for neurofibrillary changes or amyloid plaques. The mean number of COX-2 or ppRb immunoreactive neurons is significantly decreased in Braak stage C compared to Braak stage A for amyloid deposits. Immunoreactivity for glial markers KP1, CR3/43 and GFAP appears in the later Braak stages and is significantly increased in Braak stage V-VI compared to Braak stage 0 for neurofibrillary changes. In addition, a significant negative correlation is observed between the presence of KP1, CR3/43 and GFAP immunoreactivity and the presence of neuronal immunoreactivity for COX-2 and ppRb. These data show that maximal COX-2 and ppRb immunoreactivity in neurons occurs during early Braak stages prior to the maximal activation of astrocytes and microglia. In contrast to in vitro studies, post mortem data do not support a causal relation between the activation of microglia and astrocytes and the expression of neuronal COX-2 and ppRb in the pathological cascade of AD.

Automatic control model of water filling system with Allen Bradley Micrologix 1400 PLC

Science.gov (United States)

Harahap, R.; Adyatma, AF; Fahmi, F.

2018-02-01

Programmable Logic Controller or PLC today plays an important role in most industrial control systems. PLC usage can be encountered in almost all fields of industry, not only in the manufacturing world but also on many other things such as elevators in office buildings, hotels hospitals, and others. PLC is an electronic control tool that operates in logic that its programming can be modified with relative ease. As with any controller in general, the PLC processes input signals to further discharge output according to the desired program. PLC usage is very broad because of its high reliability, can be reprogrammed or modified with relative ease, and very helpful in the tracking troubleshooting. One type of existing PLC is Allen Bradley PLC. Allen Bradley PLC program is commonly used in various industries. PLC Allen Bradley (AB) has several types, and one of them is the type of Micrologic 1400. In this study we design a system as a comparison with the conventional system. For that to explore the use of a PLC program which will be supported by a simulator tool, including a program to RSLogic 500, how to programming, monitoring via RSView32, and modification. It is expected to understand the application aspect of operation and programming of this specific PLC and its potential. The purpose of this research is to design water filling automation system by using Allen Bradley Micrologic 1400 type 1766-L32BXB PLC, empowering the use of Allen Bradley Micrologic 1400 PLC and to regulate the desired process to obtain efficiency and effectiveness compared with conventional system arrangement using Relay.

Characterization of phospholipase C gamma enzymes with gain-of-function mutations.

Science.gov (United States)

Everett, Katy L; Bunney, Tom D; Yoon, Youngdae; Rodrigues-Lima, Fernando; Harris, Richard; Driscoll, Paul C; Abe, Koichiro; Fuchs, Helmut; de Angelis, Martin Hrabé; Yu, Philipp; Cho, Wohnwa; Katan, Matilda

2009-08-21

Phospholipase C gamma isozymes (PLC gamma 1 and PLC gamma 2) have a crucial role in the regulation of a variety of cellular functions. Both enzymes have also been implicated in signaling events underlying aberrant cellular responses. Using N-ethyl-N-nitrosourea (ENU) mutagenesis, we have recently identified single point mutations in murine PLC gamma 2 that lead to spontaneous inflammation and autoimmunity. Here we describe further, mechanistic characterization of two gain-of-function mutations, D993G and Y495C, designated as ALI5 and ALI14. The residue Asp-993, mutated in ALI5, is a conserved residue in the catalytic domain of PLC enzymes. Analysis of PLC gamma 1 and PLC gamma 2 with point mutations of this residue showed that removal of the negative charge enhanced PLC activity in response to EGF stimulation or activation by Rac. Measurements of PLC activity in vitro and analysis of membrane binding have suggested that ALI5-type mutations facilitate membrane interactions without compromising substrate binding and hydrolysis. The residue mutated in ALI14 (Tyr-495) is within the spPH domain. Replacement of this residue had no effect on folding of the domain and enhanced Rac activation of PLC gamma 2 without increasing Rac binding. Importantly, the activation of the ALI14-PLC gamma 2 and corresponding PLC gamma 1 variants was enhanced in response to EGF stimulation and bypassed the requirement for phosphorylation of critical tyrosine residues. ALI5- and ALI14-type mutations affected basal activity only slightly; however, their combination resulted in a constitutively active PLC. Based on these data, we suggest that each mutation could compromise auto-inhibition in the inactive PLC, facilitating the activation process; in addition, ALI5-type mutations could enhance membrane interaction in the activated state.

Bit rate maximization for multicast LP-OFDM systems in PLC context

OpenAIRE

Maiga , Ali; Baudais , Jean-Yves; Hélard , Jean-François

2009-01-01

ISBN: 978-88-900984-8-2.; International audience; In this paper, we propose a new resource allocation algorithm based on linear precoding technique for multicast OFDM systems. Linear precoding technique applied to OFDM systems has already proved its ability to significantly increase the system throughput in a powerline communication (PLC) context. Simulations through PLC channels show that this algorithm outperforms the classical multicast method (up to 7.3% bit rate gain) and gives better pe...

Potent anti-tumor effect generated by a novel human papillomavirus (HPV antagonist peptide reactivating the pRb/E2F pathway.

Directory of Open Access Journals (Sweden)

Cai-ping Guo

Full Text Available Human papillomavirus type 16 (HPV16 E7 is a viral oncoprotein believed to play a major role in cervical cancer. In this study, an antagonist peptide against HPV16E7 protein was first identified from screening the c7c phage display peptide library. The binding specificity and affinity of the selected peptide to HPV16E7 were tested by competitive enzyme-linked immunosorbent assay (ELISA. The antagonist peptide showed obvious anti-tumor efficacy both in cell lines and animal tumor models. Significant cell proliferation inhibition with high specificity was noted when HPV16-positive cells were treated with the peptide. This anti-tumor efficacy was resulted from overriding the activities of HPV16E7 and reactivating the pRb/E2F pathway, as shown by a series of experiments. Flow cytometry analysis revealed that the selected peptide induced G1 arrest in a dose-dependent manner. Competitive ELISA, pull down, and Co-IP experiments indicated that the selected peptide disrupted the interaction between HPV16E7 and pRb proteins both in vitro and in vivo. Luciferase reporter assay verified that transcription activities of E2F were suppressed by the peptide through restoration of pRb. RT-PCR and Western blot revealed that it reduced cyclins A, D1, and E1 expression, and led to HPV16E7 protein degradation, but pRb protein stabilization. The current study suggests that this specific peptide may serve as a potential therapeutic agent for HPV16-positive cervical cancer.

Synthesis and Characterization of the Ternary Thiobismuthates A9Bi13S24 (A = K, Rb)

KAUST Repository

Davaasuren, Bambar; Alahmary, Fatimah S.; Dashjav, Enkhtsetseg; Khanderi, Jayaprakash; Rothenberger, Alexander

2016-01-01

.9072(9) Å, β = 105.826(3)° for KBiS (1) and a = 31.823(6) Å, b = 4.1177(8) Å, c = 21.086(4) Å, β = 105.62(3)° for RbBiS (2). The crystal structure of 1 contains a 3D [KBiS] polyanionic framework, whereas 2 consists of 2D [RbBiS] polyanionic slabs stacked

Modernization project of the rod control system and in-core instrumentation system for 34 units of the 900 MW French EDF fleet

International Nuclear Information System (INIS)

Tavolara, Ivan; Verburgh, Pierre; Menager, Antoine

2010-01-01

Rolls-Royce and Cegelec, in partnership, carry out a unique and considerable modernisation project of two Instrumentation and Control (I and C) systems for the entire 900 MWe fleet of Electricite De France (EDF). Both rod control (RCS) and reactor in-core measurement (RIC) systems are to be modernised in the frame of the third ten-year renovation of all 34 reactor units over 9 power plants. The RCS contributes to the control of nuclear power by actuating control rod drive mechanisms that allow insertion or withdrawal of control rods. The RCS has also monitoring functions such as controlling the actual rods' position as well as the functional consistency between commands and actual positions. The RIC system measures in-core neutron flux, providing useful information to the control room as well as to the reactor unit computer for further processing. The renovated systems shall replace the existing ageing analog technology by modern digital technology based on PLC (Programmable Logic Controllers) and FPGA (Field-Programmable Gate Array) in the case of power subassemblies of RCS. Both systems rely for certain functions on a common network linking the RCS and RIC networks, improving operations and maintenance thanks to a powerful Man Machine Interface at the different locations of the systems with an extensive suite of tools and diagnostic menus. The project whose design phase started in July 2006 is now in its deployment phase after the successful site implementation of both systems at the first units of Tricastin and Fessenheim power plants, respectively in August 2009 and February 2010. The deployment shall continue with the other 32 units until 2020. Rolls-Royce has a broad range of civil nuclear expertise, including work related to licensing and safety reviews, engineering design, supply chain management, manufacturing, installation and commissioning of the nuclear island systems and equipment, as well as operational management through life support. Cegelec, with

A calorimetric and thermodynamic investigation of A2[(UO2)2(MoO4)O2] compounds with A = K and Rb and calculated phase relations in the system (K2MoO4 + UO3 + H2O)

International Nuclear Information System (INIS)

Lelet, Maxim I.; Suleimanov, Evgeny V.; Golubev, Aleksey V.; Geiger, Charles A.; Bosbach, Dirk; Alekseev, Evgeny V.

2015-01-01

Highlights: • We determined the low temperature heat capacity of A 2 [(UO 2 ) 2 (MoO 4 )O 2 ] compounds with A = K and Rb. • We determined enthalpy of formation of K 2 [(UO 2 ) 2 (MoO 4 )O 2 ] by HF solution calorimetry. • We calculated Δ f G° (T = 298 K) of all phases from studied series. • Using obtained data we performed a thermodynamic modelling in the system (K 2 MoO 4 + UO 3 + H 2 O). - Abstract: A calorimetric and thermodynamic investigation of two alkali-metal uranyl molybdates with general composition A 2 [(UO 2 ) 2 (MoO 4 )O 2 ], where A = K and Rb, was performed. Both phases were synthesized by solid-state sintering of a mixture of potassium or rubidium nitrate, molybdenum (VI) oxide and gamma-uranium (VI) oxide at high temperatures. The synthetic products were characterised by X-ray powder diffraction and X-ray fluorescence methods. The enthalpy of formation of K 2 [(UO 2 ) 2 (MoO 4 )O 2 ] was determined using HF-solution calorimetry giving Δ f H° (T = 298 K, K 2 [(UO 2 ) 2 (MoO 4 )O 2 ], cr) = −(4018 ± 8) kJ · mol −1 . The low-temperature heat capacity, C p °, was measured using adiabatic calorimetry from T = (7 to 335) K for K 2 [(UO 2 ) 2 (MoO 4 )O 2 ] and from T = (7 to 326) K for Rb 2 [(UO 2 ) 2 (MoO 4 )O 2 ]. Using these C p ° values, the third law entropy at T = 298.15 K, S°, is calculated as (374 ± 1) J · K −1 · mol −1 for K 2 [(UO 2 ) 2 (MoO 4 )O 2 ] and (390 ± 1) J · K −1 · mol −1 for Rb 2 [(UO 2 ) 2 (MoO 4 )O 2 ]. These new experimental results, together with literature data, are used to calculate the Gibbs energy of formation, Δ f G°, for both phases giving: Δ f G° (T = 298 K, K 2 [(UO 2 ) 2 (MoO 4 )O 2 ], cr) = (−3747 ± 8) kJ · mol −1 and Δ f G° (T = 298 K, Rb 2 [(UO 2 ) 2 (MoO 4 )], cr) = −3736 ± 5 kJ · mol −1 . Smoothed C p °(T) values between 0 K and 320 K are presented, along with values for S° and the functions [H°(T) − H°(0)] and [G°(T) − H°(0)], for both phases. The

High Temperature Electro-Mechanical Devices For Nuclear Applications

International Nuclear Information System (INIS)

Robertson, D.

2010-01-01

Nuclear power plants require a number of electro-mechanical devices, for example, Control Rod Drive Mechanisms (CRDM's) to control the raising and lowering of control rods and Reactor Coolant Pumps (RCP's) to circulate the primary coolant. There are potential benefits in locating electro-mechanical components in areas of the plant with high ambient temperatures. One such benefit is the reduced need to make penetrations in pressure vessels leading to simplified plant design and improved inherent safety. The feature that limits the ambient temperature at which most electrical machines may operate is the material used for the electrical insulation of the machine windings. Conventional electrical machines generally use polymer-based insulation that limits the ambient temperature they can operate in to below 200 degrees Celsius. This means that when a conventional electrical machine is required to operate in a hot area it must be actively cooled necessitating additional systems. This paper presents data gathered during investigations undertaken by Rolls-Royce into the design of high temperature electrical machines. The research was undertaken at Rolls-Royce's University Technology Centre in Advanced Electrical Machines and Drives at Sheffield University. Rolls- Royce has also been investigating high temperature wire and encapsulants and latterly techniques to provide high temperature insulation to terminations. Rolls-Royce used the experience gained from these tests to produce a high temperature electrical linear actuator at sizes representative of those used in reactor systems. This machine was tested successfully at temperatures equivalent to those found inside the reactor vessel of a pressurised water reactor through a full series of operations that replicated in service duty. The paper will conclude by discussing the impact of the findings and potential electro-mechanical designs that may utilise such high temperature technologies. (authors)

ADVANCED TURBINE SYSTEM FEDERAL ASSISTANCE PROGRAM

Energy Technology Data Exchange (ETDEWEB)

Frank Macri

2003-10-01

Rolls-Royce Corporation has completed a cooperative agreement under Department of Energy (DOE) contract DE-FC21-96MC33066 in support of the Advanced Turbine Systems (ATS) program to stimulate industrial power generation markets. This DOE contract was performed during the period of October 1995 to December 2002. This final technical report, which is a program deliverable, describes all associated results obtained during Phases 3A and 3B of the contract. Rolls-Royce Corporation (formerly Allison Engine Company) initially focused on the design and development of a 10-megawatt (MW) high-efficiency industrial gas turbine engine/package concept (termed the 701-K) to meet the specific goals of the ATS program, which included single digit NOx emissions, increased plant efficiency, fuel flexibility, and reduced cost of power (i.e., $/kW). While a detailed design effort and associated component development were successfully accomplished for the 701-K engine, capable of achieving the stated ATS program goals, in 1999 Rolls-Royce changed its focus to developing advanced component technologies for product insertion that would modernize the current fleet of 501-K and 601-K industrial gas turbines. This effort would also help to establish commercial venues for suppliers and designers and assist in involving future advanced technologies in the field of gas turbine engine development. This strategy change was partly driven by the market requirements that suggested a low demand for a 10-MW aeroderivative industrial gas turbine, a change in corporate strategy for aeroderivative gas turbine engine development initiatives, and a consensus that a better return on investment (ROI) could be achieved under the ATS contract by focusing on product improvements and technology insertion for the existing Rolls-Royce small engine industrial gas turbine fleet.

Synthesis, Structure and Thermal Behavior of Oxalato-Bridged Rb+ and H3O+ Extended Frameworks with Different Dimensionalities

Science.gov (United States)

Kherfi, Hamza; Hamadène, Malika; Guehria-Laïdoudi, Achoura; Dahaoui, Slimane; Lecomte, Claude

2010-01-01

Correlative studies of three oxalato-bridged polymers, obtained under hydrothermal conditions for the two isostructural compounds {Rb(HC2O4)(H2C2O4)(H2O)2}∞1, 1, {H3O(HC2O4)(H2C2O4).2H2O}∞1, 2, and by conventional synthetic method for {Rb(HC2O4)}∞3, 3, allowed the identification of H-bond patterns and structural dimensionality. Ferroïc domain structures are confirmed by electric measurements performed on 3. Although 2 resembles one oxalic acid sesquihydrate, its structure determination doesn’t display any kind of disorder and leads to recognition of a supramolecular network identical to hybrid s-block series, where moreover, unusual H3O+ and NH4+ similarity is brought out. Thermal behaviors show that 1D frameworks with extended H-bonds, whether with or without a metal center, have the same stability. Inversely, despite the dimensionalities, the same metallic intermediate and final compounds are obtained for the two Rb+ ferroïc materials.

High-resolution 13C nuclear magnetic resonance evidence of phase transition of Rb,Cs-intercalated single-walled nanotubes

KAUST Repository

Bouhrara, M.

2011-09-06

We present 13 C high-resolution magic-angle-turning (MAT) and magic angle spinning nuclear magnetic resonance data of Cs and Rb intercalated single walled carbon nanotubes. We find two distinct phases at different intercalation levels. A simple charge transfer is applicable at low intercalation level. The new phase at high intercalation level is accompanied by a hybridization of alkali (s) orbitals with the carbon (sp2) orbitals of the single walled nanotubes, which indicate bundle surface sites is the most probable alkali site.

MDM2, p53 and pRb Expression Prior to Definitive Chemoradiotherapy in Esophageal Carcinoma

International Nuclear Information System (INIS)

Yoon, Mee Sun; Nam, Taek Keun; Lee, Jae Hyuk; Cho, Sang Hee; Song, Ju Young; Ahn, Sung Ja; Chung, Ik Joo; Chung, Woong Ki; Nah, Byung Sik

2007-01-01

Purpose: This study evaluated the pretreatment expression patterns of MDM2, p53, and pRb proteins to determine if the expression patterns could predict the outcome of concurrent chemoradiotherapy (CCRT) for esophageal squamous cell carcinoma and aid in the decisions for the selection of treatment modalities. Materials and Methods: Fifty-one patients that were treated with definitive hemoradiotherapy for stage I∼ IVa esohageal squamous cell carcinoma were selected for this study. Radiotherapy was administered with daily 1.8∼2 Gy fractions up to a median dose of 54 Gy for primary tumors, and with four cycles of cisplatin/5-fluorouracil chemotherapy that was administered every 4 weeks, the first two cycles of which were administered concurrently with radiotherapy. Expression of MDM2, p53, and pRb was investigated by immunohistochemical analysis using pretreatment biopsy specimens. Results: MDM2, p53, and pRb were detected with high immunoreactivity in 19.6%, 27.5%, and 66.7% of the patients, respectively. However, there was no significant correlation between expression of these factors and clinical outcome. By the use of multivariate analysis with nine covariates-age, tumor location, tumor length, stage, pathological response, clinical response, MDM2 expression, p53 expression, and pRb expression, only pathological response and stage were significant factors for cause-specific survival. Conclusion: Expression of MDM2, p53, and pRb was not found to be clinically significant for predicting outcomes after CCRT in this study. Further studies with a larger patient population and longer follow-up periods are needed to re-evaluate the expression pattern and to identify new predictors for CCRT response

Roll force prediction of high strength steel using foil rolling theory in cold skin pass rolling

International Nuclear Information System (INIS)

Song, Gil Ho; Jung, Jae Chook

2013-01-01

Skin pass rolling is a very important process for applying a certain elongation to a strip in the cold rolling and annealing processes, which play an important role in preventing the stretching of the yield point when the material is processed. The exact prediction of the rolling force is essential for obtaining a given elongation with the steel grade and strip size. Unlike hot rolling and cold rolling, skin pass rolling is used to apply an elongation of within 2% to the strip. Under a small reduction, it is difficult to predict the rolling force because the elastic deformation behavior of the rolls is complicated and a model for predicting the rolling force has not yet been established. Nevertheless, the exact prediction of the rolling force in skin pass rolling has gained increasing importance in recent times with the rapid development of high strength steels for use in automobiles. In this study, the possibility of predicting the rolling force in skin pass rolling for producing various steel grades was examined using foil rolling theory, which is known to have similar elastic deformation behavior of rolls in the roll bite. It was found that a noncircular arc model is more accurate than a circular model in predicting the roll force of high strength steel below TS 980 MPa in skin pass rolling

Expression of phosphoinositide-specific phospholipase C isoforms in native endothelial cells.

Science.gov (United States)

Béziau, Delphine M; Toussaint, Fanny; Blanchette, Alexandre; Dayeh, Nour R; Charbel, Chimène; Tardif, Jean-Claude; Dupuis, Jocelyn; Ledoux, Jonathan

2015-01-01

Phospholipase C (PLC) comprises a superfamily of enzymes that play a key role in a wide array of intracellular signalling pathways, including protein kinase C and intracellular calcium. Thirteen different mammalian PLC isoforms have been identified and classified into 6 families (PLC-β, γ, δ, ε, ζ and η) based on their biochemical properties. Although the expression of PLC isoforms is tissue-specific, concomitant expression of different PLC has been reported, suggesting that PLC family is involved in multiple cellular functions. Despite their critical role, the PLC isoforms expressed in native endothelial cells (ECs) remains undetermined. A conventional PCR approach was initially used to elucidate the mRNA expression pattern of PLC isoforms in 3 distinct murine vascular beds: mesenteric (MA), pulmonary (PA) and middle cerebral arteries (MCA). mRNA encoding for most PLC isoforms was detected in MA, MCA and PA with the exception of η2 and β2 (only expressed in PA), δ4 (only expressed in MCA), η1 (expressed in all but MA) and ζ (not detected in any vascular beds tested). The endothelial-specific PLC expression was then sought in freshly isolated ECs. Interestingly, the PLC expression profile appears to differ across the investigated arterial beds. While mRNA for 8 of the 13 PLC isoforms was detected in ECs from MA, two additional PLC isoforms were detected in ECs from PA and MCA. Co-expression of multiple PLC isoforms in ECs suggests an elaborate network of signalling pathways: PLC isoforms may contribute to the complexity or diversity of signalling by their selective localization in cellular microdomains. However in situ immunofluorescence revealed a homogeneous distribution for all PLC isoforms probed (β3, γ2 and δ1) in intact endothelium. Although PLC isoforms play a crucial role in endothelial signal transduction, subcellular localization alone does not appear to be sufficient to determine the role of PLC in the signalling microdomains found in the

Expression of phosphoinositide-specific phospholipase C isoforms in native endothelial cells.

Directory of Open Access Journals (Sweden)

Delphine M Béziau

Full Text Available Phospholipase C (PLC comprises a superfamily of enzymes that play a key role in a wide array of intracellular signalling pathways, including protein kinase C and intracellular calcium. Thirteen different mammalian PLC isoforms have been identified and classified into 6 families (PLC-β, γ, δ, ε, ζ and η based on their biochemical properties. Although the expression of PLC isoforms is tissue-specific, concomitant expression of different PLC has been reported, suggesting that PLC family is involved in multiple cellular functions. Despite their critical role, the PLC isoforms expressed in native endothelial cells (ECs remains undetermined. A conventional PCR approach was initially used to elucidate the mRNA expression pattern of PLC isoforms in 3 distinct murine vascular beds: mesenteric (MA, pulmonary (PA and middle cerebral arteries (MCA. mRNA encoding for most PLC isoforms was detected in MA, MCA and PA with the exception of η2 and β2 (only expressed in PA, δ4 (only expressed in MCA, η1 (expressed in all but MA and ζ (not detected in any vascular beds tested. The endothelial-specific PLC expression was then sought in freshly isolated ECs. Interestingly, the PLC expression profile appears to differ across the investigated arterial beds. While mRNA for 8 of the 13 PLC isoforms was detected in ECs from MA, two additional PLC isoforms were detected in ECs from PA and MCA. Co-expression of multiple PLC isoforms in ECs suggests an elaborate network of signalling pathways: PLC isoforms may contribute to the complexity or diversity of signalling by their selective localization in cellular microdomains. However in situ immunofluorescence revealed a homogeneous distribution for all PLC isoforms probed (β3, γ2 and δ1 in intact endothelium. Although PLC isoforms play a crucial role in endothelial signal transduction, subcellular localization alone does not appear to be sufficient to determine the role of PLC in the signalling microdomains found

A jelly-roll process for high temperature superconducting tapes and wires

International Nuclear Information System (INIS)

Tsuei, C.C.; Chi, C.C.; Frey, T.; Mitzi, D.B.; Kazyaka, T.; Haugan, T.; Ye, J.; Patel, S.; Shaw, D.T.; Wu, M.K.

1992-01-01

As an alternative to the powder-in-tube method, a new technique called the jelly-roll process is proposed for making high-T c superconducting tapes and wires. A normal-metal sheet coated with high-T c cuprate is configured in a jelly-roll fashion and cold worked into tapes or wires made of alternating cuprate superconductor and normal metal layers. The feasibility of this new process is demonstrated for both the YBa 2 Cu 3 O 7 /Ag and Bi 2 Sr 2 CaCu 2 O 8 /Ag composite systems. The role of reduction in the cross-sectional area by cold-rolling, heat treatment and oxygenation in optimizing T c and J c has been studied. Preliminary results indicate that partialmelt texturing, in the Bi 2 Sr 2 CaCu 2 O 8 /Ag system, results in a relatively field independent J c (H c (H = 0) ∝5 X 10 4 A cm -2 at 4.2 K