Large Area 2D and 3D Colloidal Photonic Crystals Fabricated by a Roll-to-Roll Langmuir-Blodgett Method.

Science.gov (United States)

Parchine, Mikhail; McGrath, Joe; Bardosova, Maria; Pemble, Martyn E

2016-06-14

We present our results on the fabrication of large area colloidal photonic crystals on flexible poly(ethylene terephthalate) (PET) film using a roll-to-roll Langmuir-Blodgett technique. Two-dimensional (2D) and three-dimensional (3D) colloidal photonic crystals from silica nanospheres (250 and 550 nm diameter) with a total area of up to 340 cm(2) have been fabricated in a continuous manner compatible with high volume manufacturing. In addition, the antireflective properties and structural integrity of the films have been enhanced via the use of a second roll-to-roll process, employing a slot-die coating of an optical adhesive over the photonic crystal films. Scanning electron microscopy images, atomic force microscopy images, and UV-vis optical transmission and reflection spectra of the fabricated photonic crystals are analyzed. This analysis confirms the high quality of the 2D and 3D photonic crystals fabricated by the roll-to-roll LB technique. Potential device applications of the large area 2D and 3D colloidal photonic crystals on flexible PET film are briefly reviewed.

PET/CT in lymphoma patients; PET-CT bei Lymphompatienten

Energy Technology Data Exchange (ETDEWEB)

Steinert, H.C. [Universitaetsspital Zuerich, Klinik und Poliklinik fuer Nuklearmedizin (Switzerland)

2004-11-01

First results of PET/CT in Hodgkin's disease (HD) and aggressive non-Hodgkin's lymphoma (NHL) are reported. From March 2001 to August 2004 822 PET/CT were performed at our clinic in lymphoma patients for primary staging, restaging after therapy, and diagnosis of recurrence. For coregistration non contrast-enhanced low-dose CT were used. Due to the exact anatomic localization of {sup 18}F-FDG accumulating lesions equivocal or false positive PET findings are avoided. In comparison to contrast enhanced CT, PET/CT has a higher sensitivity and specificity in patients with HD and aggressive NHL. Integration of PET/CT in treatment planning of radiation therapy optimizes the field volume. Even in the initial phase of clinical evaluation, PET/CT has proven useful in staging and restaging of lymphoma. The exact anatomic localization of the PET findings is essential for a precise report, for treatment planning of radiation therapy, and for planning surgical biopsy. (orig.) [German] Erste Ergebnisse der PET-CT bei Morbus Hodgkin (HD) und den aggressiven Non-Hodgkin-Lymphomen (NHL) werden beschrieben. Von Maerz 2001 bis August 2004 wurden 822 PET-CT bei Lymphompatienten zum primaeren Staging, zum Restaging nach Therapie und zur Rezidivdiagnostik an unserer Klinik durchgefuehrt. Fuer die Koregistration wurde ein Low-dose-CT ohne i.v.-Kontrastmittel verwendet. Durch die exakte anatomische Zuordnung der {sup 18}F-FDG aufnehmenden Laesionen wurden unklare oder falsch-positive PET-Befunde vermieden. Die PET-CT erzielte im Vergleich zur KM-verstaerkten CT eine hoehere Sensitivitaet und Spezifitaet bei Patienten mit HD und aggressiven NHL. Die Integration der PET-CT in die Planung der Strahlentherapie fuehrte zu einer Optimierung der Feldgrenzen. Die PET-CT hat sich bereits in der Phase der initialen klinischen Evaluation als wertvoll beim Staging und Restaging von Lymphomen erwiesen. Die exakte anatomische Zuordnung der PET-Informationen ist fuer eine sichere Befundung

PET-Studies in parkinson's disease; Untersuchungen mit der Positronen-Emissions-Tomographie (PET) bei Patienten mit Morbus Parkinson

Energy Technology Data Exchange (ETDEWEB)

Schwarz, J. [Klinik fuer Neurologie, Univ. Leipzig (Germany)

2002-09-01

Positron-emission-tomography (PET) has enabled to study the metabolism and blood flow in specific brain areas. Besides, there is a variety of radiotracers that allow quantification of the function of distinct molecules. In respect to Parkinson's disease, PET allowed for the first time to assess the number of dopaminergic neurons in vivo. Thus, helping confirming a dopaminergic deficit, measuring disease progression and also help to determine the function of dopaminergic grafts. Current research has shifted to determine the role of related neurotransmitter systems in the pathophysiology of Parkinson's disease. (orig.) [German] Die positronen-emissions-tomographie (PET) bietet neben der Messung von Metabolismus und Blutfluss die Moeglichkeit der Darstellung von einzelnen Molekuelen. Bei Patienten mit Morbus Parkinson hat es diese Technik erstmals erlaubt, die Anzahl der dopaminergen Neurone zu quantifizieren, wodurch die Diagnose gesichert, die Progression der Erkrankung beurteilt und auch das Anwachsen von Implantaten beurteilt werden kann. Die PET hat einen wesentlichen Beitrag zu unserem heutigen Wissen ueber die Pathophysiologie dieser Erkrankung beigetragen. (orig.)

Die Rolle des Gerichtsdolmetschers - Experte oder notwendiges Übel?

DEFF Research Database (Denmark)

Christensen, Tina Paulsen

2012-01-01

Die Zahl der gedolmetschten Gerichtsverhandlungen steigt weiterhin in vielen Rechtssystemen, weshalb es immer wichtiger wird, dass Rechtssysteme über qualifizierte Dolmetscher verfügen. In Dänemark begegnen Richter, die Rezipienten von Gerichtsdolmetschleistungen sind, sowohl professionellen als...... auch nicht- oder semi-professionellen Gerichtsdolmetschern. Dies lässt vermuten, dass die Richter in der Praxis Dolmetschleistungen von sehr unterschiedlicher Qualität erleben und vermutlich kein einheitliches Bild von der Rolle des Gerichtsdolmetschers haben. Ziel der Studie, die ich in diesem Beitrag...

PET-CT and PET-MRI of the prostate. From {sup 18}F-FDG to {sup 68}Ga-PSMA; PET-CT/-MRT der Prostata. Von {sup 18}F-FDG zu {sup 68}Ga-PSMA

Energy Technology Data Exchange (ETDEWEB)

Knorr, K.; Eiber, M.; Scheidhauer, K. [Technische Universitaet Muenchen, Nuklearmedizinische Klinik und Poliklinik, Klinikum rechts der Isar, Muenchen (Germany); Maurer, T. [Technische Universitaet Muenchen, Urologische Klinik und Poliklinik, Klinikum rechts der Isar, Muenchen (Germany); Wester, H.J. [Technische Universitaet Muenchen, Pharmazeutische Radiochemie, Garching (Germany)

2017-08-15

Fluordesoxyglukose (FDG) ist wegen der biologischen Besonderheiten des Prostatakarzinoms nur bei entdifferenzierten Tumoren hilfreich. Radiopharmaka wie Cholin-Derivate, das beim Prostatakarzinom vermehrt in die Tumorzelle aufgenommen und in die Zellmembran eingebaut wird sowie in juengster Zeit die hochspezifischen Liganden fuer das prostataspezifische Membranantigen (PSMA) revolutionieren derzeit die Prostatakarzinombildgebung und das (Re-)Staging. {sup 68}Ga-markierte PSMA-Liganden fuer PET-CT und PET-MRT sind hochspezifische Tracer zur Primaerdiagnostik sowie zur Lokalisationsdiagnostik im biochemischen Rezidiv eines Prostatakarzinoms. Bei Risikopatienten, also Patienten mit Intermediate- und High-risk-Tumoren haben sie die cholinbasierte PET-CT weitgehend verdraengt, insbesondere auch bei sehr niedrigen PSA-Werten (prostataspezifisches Antigen) von <0,5 ng/ml in der Rezidivdiagnostik. Die Anwendung bei der Primaerdiagnostik als PET-MRT, auch in Kombination mit der multiparametrischen MRT (mpMR), ist vielversprechend bzgl. der Fruehdiagnostik und der bildfusionsgestuetzten Biopsie sowie zur Operations- und Bestrahlungsplanung. (orig.)

˝FLUMINENSIA˝ VON FRAN KURELAC

Directory of Open Access Journals (Sweden)

Leopoldina Veronika Banaš

1990-01-01

Full Text Available Das Buch "Fluminensia" (1862 von Fran Kurelac enthält die für die Schulfestlichkeiten geschriebenen Reden, Gelegenheitsgedichte - Ehrengedichte den bedeutenden und verdienstvollen Zeitgenossen gewidmet: dem Bischof von Senj und Modrus" Mirko Ožegović, Bartol Zmajic von Bakar, dem kroatischen Ban Josip Jelačić u.a. Danach folgen Aufrufe ("Proglasi" aus stürmischem 1848, gerichtet auf die Granzlandbewohner, Deutscher, ungarische Kroaten, Rumänen und Slawonier. Die Aufrufe wurden von Kurelac im Namen der Banalregierung beschrieben. Am Ende des Buches steht eine sprachwissenschaftliche Abhandlung über die ubstantivbiegung. Die für die Schulfestlichkeiten geschreibenen Reden sind wissenschaftliche Inhalte, essaystisch-didaktisch gestalltet, mit der Meldung über die Bedeutung der Wisenschaft, über die Bedeutung und Rolle der Sprache und des Buches für den Fortschritt des Volkes. Der Verfasser widmete dieses Buch seinen ehemaligen Schülern. "Fluminensia" nimmt eine wichtige Stelle in literarischer und sprachwissenschaftlicher Schöpfung auf dem Gebiet von Rijeka und Kroatien im 19. Jahrhundert ein.

Comparison of PET and fMRI activation patterns during declarative memory processes; Vergleich von PET und fMRT-Aktivierungsmustern waehrend deklarativer Gedaechtnisvorgaenge

Energy Technology Data Exchange (ETDEWEB)

Mottaghy, F.M.; Krause, B.J.; Schmidt, D.; Hautzel, H.; Mueller-Gaertner, H.-W. [Heinrich-Heine-Univ. Duesseldorf (Germany). Klinik fuer Nuklearmedizin; Forschungszentrum Juelich (DE). Klinik fuer Nuklearmedizin (KME); Herzog, H.; Shah, N.J. [Forschungszentrum Juelich (DE). Inst. fuer Medizin (IME); Halsband, U. [Albert-Ludwigs-Univ. Freiburg (Germany). Psychologisches Inst., Neuropsychologie

2000-11-01

hochbildhaften Inhaltes zu lernen und dann zu erinnern (visuelle Praesentation). Ergebnisse: Die Gedaechtnisleistung (Anteil der richtigen Assoziationen) der Probanden lag sowohl in der PET- als auch in der fMRT-Studie bei 93%{+-}9,3%. Waehrend des Lernvorgangs wurden sowohl in der PET als auch in der fMRT Aktivierungen im anterioren cingulaeren Kortex, im linken und rechten praefrontalen Kortex und im Praecuneus beobachtet. Nur in der fMRT liess sich waehrend des Lernvorgangs der parahippocampale Kortex mit darstellen. Waehrend der Abfrage zeigten sich Aktivierungen im linken und rechten Praecuneus, im linken praefrontalen Kortex sowie im anterioren cingulaeren Kortex. Unterschiede finden sich hier vor allem im Bereich des praefrontalen Kortex, da in der fMRT frontalpolare Areale aufgrund von Suszeptibilitaetsartefakten nicht darstellbar sind. Die lokalen Maxima der kortikalen Regionen, die in beiden Bildgebungsmodalitaeten darstellbar sind, lagen im Mittel 7,2{+-}6,5 mm auseinander. Schlussfolgerung: Die Gemeinsamkeiten in den Aktivierungsmustern in der PET und der fMRT ueberwiegen. Die Wahl der Bildgebungsmodalitaet fuer eine Aktivierungsstudie sollte u.a. abhaengig vom Design (Einzelsubjekt vs. Gruppenstudie) und untersuchter kortikaler bzw. subkortikaler Struktur (Suszeptabilitaet, Signalaufloesung) getroffen werden. (orig.)

The influence of strain on annealing behaviour of heavily rolled aluminium AA1050

DEFF Research Database (Denmark)

Mishin, Oleg; Juul Jensen, Dorte; Hansen, Niels

2012-01-01

Deformation structures and annealing behaviour have been analysed in the centre layer of two AA1050 samples cold-rolled to von Mises strains of 3.6 and 6.4. During annealing at 270-300°C structural coarsening and discontinuous recrystallization occurred in both samples. In the coarsened microstru......Deformation structures and annealing behaviour have been analysed in the centre layer of two AA1050 samples cold-rolled to von Mises strains of 3.6 and 6.4. During annealing at 270-300°C structural coarsening and discontinuous recrystallization occurred in both samples. In the coarsened...

Molekulare Charakterisierung von Glykosyltransferasen in Vitis vinifera

OpenAIRE

Frotscher, Johanna

2014-01-01

Terpenoide spielen eine wichtige Rolle für das Aroma von Weinbeeren (Vitis vinifera). Glykosyltransferasen katalysieren die Übertragung von Zuckerresten auf Terpenoide, was diese geruchlos werden lässt. Um die verantwortlichen Enzyme zu identifizieren wurde deren Genfamilie in silico untersucht, 15 Kandidatengene ausgewählt, deren Transkription analysiert und die Ergebnisse mit Terpenoidprofilen verglichen. Dadurch konnten fünf Gene ausgewählt werden, deren offener Leserahmen sequenziert wurd...

Planungsunterstützung für Pankreasoperationen bei Hyperinsulinismus von Kindern

Science.gov (United States)

Dornheim, J.; Preim, B.; Preim, U.; Mohnike, K.; Blankenstein, O.; Füchtner, F.; Mohnike, W.; Empting, S.; Mohnike, K.

Auf Basis von sechs PET/CT-Datensätzen des Pankreas wird eine Computerunterstützung für die Teilresektion der Bauchspeicheldr üse (Pankreas) bei fokalem Hyperinsulinismus von Kindern entwickelt. Ziel ist es, die Lokalisation des krankhaften Fokus im Pankreasgewebe präoperativ dreidimensional zu visualisieren, um so die Sicherheit des Eingriffs zu erhöhen. Die relevanten anatomischen Strukturen werden im CT segmentiert und anschließend dreidimensional visualisiert. Der im PET erkennbare Fokus wird in diese anatomische 3D-Visualisierung eingeblendet. Es zeigt sich eine klare Erkennbarkeit des Fokus in allen sechs Fällen.

Ontologie-basierte Definition von Anforderungen an Validierungswerkzeuge in der Fahrzeugtechnik

OpenAIRE

El-Haji, Mohanad

2016-01-01

Die Aktivitäten Validierung und Verifizierung nehmen eine zentrale Rolle in der Produktentwicklung ein. Im Zuge von Validierungs- und Verifizierungsaktivitäten werden Versuche durchgeführt, um eine Prognose hinsichtlich des zukünftigen Verhaltens von Systemen zu erstellen. Die in dieser Arbeit entwickelte Methode leistet einen Beitrag zur Steigerung der Effizienz und Effektivität der Validierung und Verifizierung bei innovativen Fahrzeugentwicklungen.

Multiparametric and molecular imaging of breast tumors with MRI and PET/MRI; Multiparametrische und molekulare Bildgebung von Brusttumoren mit MRT und PET-MRT

Energy Technology Data Exchange (ETDEWEB)

Pinker, K. [Medizinische Universitaet Wien, Universitaetsklinik fuer Radiologie und Nuklearmedizin, Division fuer Molekulare und Gender Bildgebung, Wien (Austria); Memorial Sloan-Kettering Cancer Center, Department of Radiology, Molecular Imaging and Therapy Service, New York (United States); State University of Florida, Department of Scientific Computing in Medicine, Florida (United States); Marino, M.A. [Medizinische Universitaet Wien, Universitaetsklinik fuer Radiologie und Nuklearmedizin, Division fuer Molekulare und Gender Bildgebung, Wien (Austria); Policlinico Universitario G. Martino, University of Messina, Department of Biomedical Sciences and Morphologic and Functional Imaging, Messina (Italy); Meyer-Baese, A. [State University of Florida, Department of Scientific Computing in Medicine, Florida (United States); Helbich, T.H. [Medizinische Universitaet Wien, Universitaetsklinik fuer Radiologie und Nuklearmedizin, Division fuer Molekulare und Gender Bildgebung, Wien (Austria)

2016-07-15

wertvolle Information ueber die Schluesselprozesse der Krebsentstehung und Progression liefern und sowohl Diagnostik als auch Therapieplanung von Brustkrebs verbessern kann. Die multiparametrische und molekulare Bildgebung der Brust umfasst derzeit die kontrastmittelverstaerkte MRT (KM-MRT), diffusionsgewichtete Bildgebung (DWI) und Protonenspektroskopie ({sup 1}H-MRSI) sowie radiologisch-nuklearmedizinisch kombinierte Verfahren (PET-CT, MP-PET-MRT) unter Verwendung des Radiotracers Fluordesoxyglukose (FDG). Die multiparametrischen Bildgebung der Brust kann bei unterschiedlichen Feldstaerken durchgefuehrt werden (1,5-7 T). Die multiparametrische und molekulare Bildgebung in der Mammadiagnostik ist ein sich rapide entwickelndes Forschungsfeld mit neuen vielversprechenden Techniken wie der Natriumbildgebung ({sup 23}Na-MRT), der Phosphorspektroskopie ({sup 31}P-MRSI), der Chemical-Exchange-Saturation-Transfer(CEST)-, Blood-Oxygen-Level-Dependent(BOLD)- und der hyperpolarisierten MRT sowie neuen zielgerichteten Radiotracern. In den letzten Jahren hat sich die multiparametrische und molekulare Bildgebung in der Mammadiagnostik etabliert. Die multiparametrische Bildgebung der Brust ist jedoch ein sich konstant weiter entwickelndes Forschungsfeld, deren Einfluss in den naechsten Jahren weiter zunehmen und so eine verbesserte Diagnose, Staging und zielgerichtete Therapie ermoeglichen wird. (orig.)

Simultaneous whole-body PET-MRI in pediatric oncology. More than just reducing radiation?; Simultane Ganzkoerper-PET-MRT in der paediatrischen Onkologie. Mehr als nur Strahlenersparnis

Energy Technology Data Exchange (ETDEWEB)

Gatidis, S.; Gueckel, B.; Schaefer, J.F. [Universitaet Tuebingen, Radiologische Klinik, Diagnostische und Interventionelle Radiologie, Tuebingen (Germany); Fougere, C. la [Universitaet Tuebingen, Radiologische Klinik, Nuklearmedizin, Tuebingen (Germany); Schmitt, J. [Universitaet Tuebingen, Abteilung fuer Praeklinische Bildgebung und Radiopharmazie, Werner Siemens Imaging Center, Tuebingen (Germany)

2016-07-15

Diagnostic imaging plays an essential role in pediatric oncology with regard to diagnosis, therapy-planning, and the follow-up of solid tumors. The current imaging standard in pediatric oncology includes a variety of radiological and nuclear medicine imaging modalities depending on the specific tumor entity. The introduction of combined simultaneous positron emission tomography (PET) and magnetic resonance imaging (MRI) has opened up new diagnostic options in pediatric oncology. This novel modality combines the excellent anatomical accuracy of MRI with the metabolic information of PET. In initial clinical studies, the technical feasibility and possible diagnostic advantages of combined PET-MRI have been in comparison with alternative imaging techniques. It was shown that a reduction in radiation exposure of up to 70 % is achievable compared with PET-CT. Furthermore, it has been shown that the number of imaging studies necessary can be markedly reduced using combined PET-MRI. Owing to its limited availability, combined PET-MRI is currently not used as a routine procedure. However, this new modality has the potential to become the imaging reference standard in pediatric oncology in the future. This review article summarizes the central aspects of pediatric oncological PET-MRI based on existing literature. Typical pediatric oncological PET-MRI cases are also presented. (orig.) [German] Die bildgebende Diagnostik spielt in der paediatrischen Onkologie eine zentrale Rolle fuer die Diagnose, die Therapieplanung und die Nachsorge solider Tumoren. Der aktuell bildgebende Standard in der paediatrischen Onkologie sieht - abhaengig von der vorliegenden Tumorentitaet - eine Kombination mehrerer radiologischer und nuklearmedizinischer Verfahren vor. Die Einfuehrung der simultanen Positronenemissionstomographie(PET)-Magnetresonanztomographie (MRT) hat neuartige Moeglichkeiten der Diagnostik in der paediatrischen Onkologie eroeffnet. Dabei kombiniert dieses neue Verfahren die

SPECT and PET imaging in epilepsia; SPECT und PET in der Diagnostik von Epilepsien

Energy Technology Data Exchange (ETDEWEB)

Landvogt, C. [Mainz Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

2007-09-15

In preoperative localisation of epileptogenic foci, nuclear medicine diagnostics plays a crucial role. FDG-PET is used as first line diagnostics. In case of inconsistent MRI, EEG and FDG-PET findings, {sup 11}C-Flumazenil-PET or ictal and interictal perfusion-SPECT should be performed. Other than FDG, Flumazenil can help to identify the extend of the region, which should be resected. To enhance sensitivity and specificity, further data analysis using voxelbased statistical analyses or SISCOM (substraction ictal SPECT coregistered MRI) should be performed.

Voltage and Thermally Driven Roll-to-Roll Organic Printed Transistor Made in Ambient Air Conditions

DEFF Research Database (Denmark)

Pastorelli, Francesco

of the organic semiconductor poly3hexylthiophene and the dielectric material polyvinylphenol before the gate was applied by screen printing. All the processing was realized in ambient air on a PET flexible substrate. We explore the footprint and the practically accessible geometry of such devices with a special......Resume: Organic thin film transistors offer great potential for use in flexible electronics. Much of this potential lies in the solution processability of the organic polymers enabling both roll coating and printing on flexible substrates and thus greatly reducing the material and fabrication costs....... We present flexible organic power transistors prepared by fast (20 m min−1) roll-to-roll flexographic printing of the drain and source electrode structures, with an interspace below 50 um, directly on polyester foil[1]. The devices have top gate architecture and were completed by slotdie coating...

Roll-to-roll fabrication of a low-reflectance transparent conducting oxide film with subwavelength structures

Science.gov (United States)

Chou, Ta-Hsin; Cheng, Kuei-Yuan; Hsieh, Chih-Wei; Takaya, Yasuhiro

2012-04-01

The transparent conducting oxide (TCO) film is a significant component in flat panel display, e-paper and touch panel. The tin-doped indium oxide (ITO) material is one of the most popular TCOs. However, ITO has high refractive index, so the phenomenon of high-reflectance limits the wide use of ITO. In this study, the structure and mass production process of new low-reflectance TCO film is verified. Laser interference lithography and the roll-to-roll UV embossing process are used to fabricate subwavelength structures on PET film; then ITO was deposited on structures by roll-to-roll sputtering. When the dimension of structures reaches 300 nm pitch, the optical reflectance and electrical performance of film are reduced to 8.1% at wavelength 550 nm and its transmittance rate is 84.3% at the same wavelength, and the sheet resistance of this film is 50.44 Ω/□. This result indicates that the new TCO proposed in this study is suitable for touch panel and other display applications.

Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(V)Oxide as a PEDOT:PSS Replacement

DEFF Research Database (Denmark)

Martinez, Nieves Espinosa; Dam, Henrik Friis; Tanenbaum, David M.

2011-01-01

roll-to-roll (R2R) processing of all layers. The devices were prepared on flexible polyethyleneterphthalate (PET) and had the structure PET/ITO/ZnO/P3HT:PCBM/V2O5·(H2O)n/Ag. The ITO and silver electrodes were processed and patterned by use of screen printing. The zinc oxide, P3HT:PCBM and vanadium(V)oxide......The use of hydrated vanadium(V)oxide as a replacement of the commonly employed hole transporting material PEDOT:PSS was explored in this work. Polymer solar cells were prepared by spin coating on glass. Polymer solar cells and modules comprising 16 serially connected cells were prepared using full...... layers were processed by slot-die coating. The hydrated vanadium(V)oxide layer was slot-die coated using an isopropanol solution of vanadyl-triisopropoxide (VTIP). Coating experiments were carried out to establish the critical thickness of the hydrated vanadium(V)oxide layer by varying the concentration...

Die Rolle der microRNAs und Dicer in Entzündungszellen von Atemwegserkrankungen

OpenAIRE

Thiele, Stefanie

2010-01-01

Atemwegserkrankungen stellen ein weltweites Gesundheitsproblem dar und sind durch die Infiltration der Atemwege durch Immunzellen und die daraus resultierende Entzündung charakterisiert. Antientzündliche Therapieansätze sind daher am wichtigsten und effektivsten. Speziell für die Behandlung von Atemwegserkrankungen am Patienten ist eine effiziente topische Verabreichung von Therapeutika über die Atemwege wünschenswert. Small interfering RNAs (siRNAs) können Gene posttranskriptionell reguliere...

Fast Inline Roll-to-Roll Printing for Indium-Tin-Oxide-Free Polymer Solar Cells Using Automatic Registration

DEFF Research Database (Denmark)

Hösel, Markus; Søndergaard, Roar R.; Jørgensen, Mikkel

2013-01-01

layer. The third and fourth layers were slot-die coated at the same time again using inline processing at a web speed of 10 mmin1 of firstly zinc oxide as the electron transport layer followed by P3HT:PCBM as the active layer. The first three layers (silver-grid/PEDOT:PSS/ZnO) comprise a generally......Fast inline roll-to-roll printing and coating on polyethylene terephthalate (PET) and barrier foil was demonstrated under ambient conditions at web speeds of 10 mmin1 for the manufacture of indium-tin-oxide-free (ITO-free) polymer solar cells comprising a 6-layer stack: silver-grid/PEDOT:PSS/ Zn...

Die Rolle der microRNA-15b in der Pathogenese des experimentellen allergischen Asthma bronchiale

OpenAIRE

Müllers, Charlotte; Renz, Harald (Prof. Dr. med.)

2016-01-01

Das allergische Asthma bronchiale zeichnet sich durch eine von T-Helferzellen gesteuerte, komplexe und bis heute nicht vollständig verstandene chronische Entzündungsreaktion aus. Auch wenn im Rahmen des Krankheitsbildes zunehmend von einer Heterogenität und Plastizität der T-Helferzellen insgesamt ausgegangen wird, so nimmt die Gruppe der TH2-Zellen im Speziellen weiterhin eine zentrale Rolle in der Pathogenese der Erkrankung ein....

Roll-To-Roll Printing of Meter-Scale Composite Transparent Electrodes with Optimized Mechanical and Optical Properties for Photoelectronics.

Science.gov (United States)

Meng, Xiangchuan; Hu, Xiaotian; Yang, Xia; Yin, Jingping; Wang, Qingxia; Huang, Liqiang; Yu, Zoukangning; Hu, Ting; Tan, Licheng; Zhou, Weihua; Chen, Yiwang

2018-03-14

Flexible transparent electrodes are an indispensable component for flexible optoelectronic devices. In this work, the meter-scale composite transparent electrodes (CTEs) composed of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) and Ag grid/polyethylene terephthalate (PET) with optimized mechanical and optical properties are demonstrated by slot-die roll-to-roll technique with solution printing method under a low cost ($15-20 per square meter), via control of the viscosity and surface energy of PEDOT:PSS ink as well as the printing parameters. The CTEs show excellent flexibility remaining 98% of the pristine value after bending 2000 times under various bending situations, and the square resistance ( R s ) of CTEs can be reduced to 4.5-5.0 Ω/sq with an appropriate transmittance. Moreover, the optical performances, such as haze, extinction coefficient, and refractive index, are investigated, as compared with indium tin oxide/PET, which are potential for the inexpensive optoelectronic flexible devices. The CTEs could be successfully employed in polymer solar cells with different areas, showing a maximal power conversion efficiency of 8.08%.

Observation and investigation of a dynamic inflection point in current-voltage curves for roll-to-roll processed polymer photovoltaics

DEFF Research Database (Denmark)

Medford, Andrew James; Lilliedal, Mathilde Raad

2010-01-01

Inflection point behaviour is often observed in the current-voltage (IV) curve of polymer and organic solar cells. This phenomenon is examined in the context of flexible roll-to-roll (R2R) processed polymer solar cells in a large series of devices with a layer structure of: PET-ITO-ZnO-P3HT...... of this “photo-annealing” behaviour was further investigated by studying the effects of several key factors: temperature, illumination, and atmosphere. The results consistently showed that the inflection point is a dynamic interface phenomenon which can be removed under specific conditions. Subsequently...

Roll-to-Roll Printed Silver Nanowire Semitransparent Electrodes for Fully Ambient Solution-Processed Tandem Polymer Solar Cells

DEFF Research Database (Denmark)

Angmo, Dechan; Andersen, Thomas Rieks; Bentzen, Janet Jonna

2015-01-01

Silver nanowires (AgNWs) and zinc oxide (ZnO) are deposited on flexible substrates using fast roll-to-roll (R2R) processing. The AgNW film on polyethylene terephthalate (PET) shows >80% uniform optical transmission in the range of 550-900 nm. This electrode is compared to the previously reported...... spectrum reaching up to 40% increased transmission at 750 nm in comparison to Flextrode. The functionality of AgNW electrodes is demonstrated in single and tandem polymer solar cells and compared with parallel devices on traditional Flextrode. All layers, apart from the semitransparent electrodes which...... are large-scale R2R produced, are fabricated in ambient conditions on a laboratory roll-coater using printing and coating methods which are directly transferrable to large-scale R2R processing upon availability of materials. In a single cell structure, Flextrode is preferable with active layers based...

The influence of multiscale heterogeneity on recrystallization in nickel processed by accumulative roll bonding

DEFF Research Database (Denmark)

Mishin, Oleg; Zhang, Yubin; Godfrey, A.

2017-01-01

Microscopic and sample-scale heterogeneities have been characterized in nickel processed by accumulative roll bonding (ARB) to a von Mises strain of 4.8, and their influence on recrystallization have been analyzed. The microscopic deformation heterogeneities in this material are mostly associated...

Potential role of 68Ga-DOTATOC PET/CT in screening for pancreatic neuroendocrine tumour in patients with von Hippel-Lindau disease

International Nuclear Information System (INIS)

Prasad, Vikas; Brenner, Winfried; Tiling, Nikolaus; Ploeckinger, Ursula; Denecke, Timm

2016-01-01

Neuroendocrine tumours of the pancreas (pNET) are observed in 8 - 17 % of patients with von Hippel-Lindau disease (vHLD), and 11 - 20 % of these patients develop metastatic disease. MRI and CT have a very high resolution; however, their sensitivity and specificity for the detection of pNET amongst cystic lesions in the pancreas of vHLD patients are generally considered insufficient. In contrast, 68 Ga-DOTATOC PET/CT demonstrates a high sensitivity for the diagnosis and staging of neuroendocrine tumours. In this study we investigated the potential role of 68 Ga-DOTATOC PET/CT in screening of patients with vHLD. 68 Ga-DOTATOC PET/three-phase contrast-enhanced CT was performed according to guidelines in all consecutive vHLD patients between January 2012 and November 2015. All patients underwent additional MRI imaging of the abdomen, spine, and head. Chromogranin A (CgA) was determined at the time of the PET/CT examination. A lesion seen on 68 Ga-DOTATOC PET in the pancreas was defined as positive if the uptake was visually higher than in the surrounding tissues. Lesions were quantified using maximum SUV. Overall, 20 patients (8 men, 12 women; mean age 44.7 ± 11.1 years) were prospectively examined. Genetically, 12 patients had type 1 vHLD and 8 had type 2 vHLD. 68 Ga-DOTATOC PET/CT detected more pNET than morphological imaging (CT or MRI): 11 patients (55 %; 8 type 1, 3 type 2) vs. 9 patients (45 %; 6 type 1, 3 type 2). The concentration of CgA was mildly elevated in 2 of 11 patients with pNET. The mean SUVmax of the pancreatic lesions was 18.9 ± 21.9 (range 5.0 - 65.6). Four patients (36.4 %) had multiple pNETs. The mean size of the lesions on CT and/or MRI was 10.4 ± 8.3 mm (range 4 - 38 mm), and 41.1 % were larger than 10 mm. In addition, somatostatin receptor-positive cerebellar and spinal haemangioblastomas were detected in three patients (SUVmax 2.1 - 10.1). One patient presented with a solitary somatostatin receptor-positive lymph node metastasis. pNETs were

Substrate treatment and drying conditions effect on the properties of roll-to-roll gravure printed PEDOT:PSS thin films

International Nuclear Information System (INIS)

Koidis, C.; Logothetidis, S.; Kapnopoulos, C.; Karagiannidis, P.G.; Laskarakis, A.; Hastas, N.A.

2011-01-01

Highlights: → Drying conditions effect on the optical, electrical and structural characteristics of R2R gravure printed PEDOT:PSS thin films → Insight on microstructural, compositional and electrical characteristics of the PEDOT:PSS films by Spectroscopic Ellipsometry combined with the AFM results → Drying temperature increase leads to less remained water volume fraction, smaller particles, lower film roughness and finally better conductivity → Transformation of spherical particles in solution to pancakes in thin films is attributed to the drying process → The increase of corona efficiency leads to a deeper PET surface modification without affecting the adhesion of PEDOT:PSS - Abstract: The optical, structural and electrical properties of poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonic acid) (PEDOT:PSS) thin films printed by roll-to-roll gravure have been investigated. Corona treatment has been applied to enhance the adhesion of PEDOT:PSS on PolyEthylene Terephthalate (PET) web. It has been found that there was a stronger in-depth surface modification of PET with the increase of corona efficiency; however, the adhesion of PEDOT:PSS was not actually affected. Also, Spectroscopic Ellipsometry and Atomic Force Microscopy have been used to extract information on the mechanisms that define PEDOT:PSS properties. The increase of the drying temperature of the PEDOT:PSS films has been found to reduce the remaining water inside the films and lead to the decrease of the PEDOT:PSS particles size.

Christian Enichlmayr, Leiter der Oberösterreichischen Landesbibliothek von 1999 bis 2015, beantwortet 10 Fragen von Bruno Bauer

Directory of Open Access Journals (Sweden)

Christian Enichlmayr

2016-05-01

Full Text Available Christian Enichlmayr beantwortet Fragen über seinen Start ins Berufsleben in der Verlagsbranche, seine Zeit an der Universitätsbibliothek Linz und seinen Wechsel an die Oberösterreichische Landesbibliothek. 1999 bis 2015 war er als deren Leiter auch in führender Position für die Transformation der Bundesstaatlichen Studienbibliothek zur Landesbibliothek sowie die Sanierung und Erweiterung des Bibliotheksgebäudes verantwortlich. Weitere Themen, die in den vergangenen 17 Jahren an der Landesbibliothek stark forciert wurden, erstrecken sich von der NS-Provenienzforschung über die Entwicklung der digitalen Landesbibliothek bis zur Stärkung der Rolle der Landesbibliothek im oberösterreichischen Kulturleben. Zuletzt spricht Enichlmayr über die Bedeutung von Kooperationen im Bibliothekswesen, die Ausrichtung des Bibliothekartages der Vereinigung Österreichischer Bibliothekarinnen und Bibliothekare 2004 in Linz sowie die Perspektive für Bibliotheken.

The study and fabrication of DLC micropattern on roll mold

Science.gov (United States)

Kwon, Young Woo; Lee, Tae Dong; Park, Yeong Min; Cho, Hyun; Kim, Jin Kon; Kim, Tae Gyu

2015-03-01

Diamond-like carbon (DLC) coating is becoming a promising protective coating layers due to its superior properties. In this study, instead of protective coating, DLC film was applied as the only component for micropattern then etched with lithography and lift-off process selectively. Furthermore, DLC film has been fabricated on aluminum roll mold. Then UV curing resin was applied to form the pattern on the polyethylene terephthalate (PET) film. The dimension and formation of the DLC micropattern on roll mold were analyzed. Moreover, the Raman spectroscopic of nitrogen-doped DLC film was analyzed.

Large-area perovskite nanowire arrays fabricated by large-scale roll-to-roll micro-gravure printing and doctor blading

Science.gov (United States)

Hu, Qiao; Wu, Han; Sun, Jia; Yan, Donghang; Gao, Yongli; Yang, Junliang

2016-02-01

Organic-inorganic hybrid halide perovskite nanowires (PNWs) show great potential applications in electronic and optoelectronic devices such as solar cells, field-effect transistors and photodetectors. It is very meaningful to fabricate ordered, large-area PNW arrays and greatly accelerate their applications and commercialization in electronic and optoelectronic devices. Herein, highly oriented and ultra-long methylammonium lead iodide (CH3NH3PbI3) PNW array thin films were fabricated by large-scale roll-to-roll (R2R) micro-gravure printing and doctor blading in ambient environments (humility ~45%, temperature ~28 °C), which produced PNW lengths as long as 15 mm. Furthermore, photodetectors based on these PNWs were successfully fabricated on both silicon oxide (SiO2) and flexible polyethylene terephthalate (PET) substrates and showed moderate performance. This study provides low-cost, large-scale techniques to fabricate large-area PNW arrays with great potential applications in flexible electronic and optoelectronic devices.Organic-inorganic hybrid halide perovskite nanowires (PNWs) show great potential applications in electronic and optoelectronic devices such as solar cells, field-effect transistors and photodetectors. It is very meaningful to fabricate ordered, large-area PNW arrays and greatly accelerate their applications and commercialization in electronic and optoelectronic devices. Herein, highly oriented and ultra-long methylammonium lead iodide (CH3NH3PbI3) PNW array thin films were fabricated by large-scale roll-to-roll (R2R) micro-gravure printing and doctor blading in ambient environments (humility ~45%, temperature ~28 °C), which produced PNW lengths as long as 15 mm. Furthermore, photodetectors based on these PNWs were successfully fabricated on both silicon oxide (SiO2) and flexible polyethylene terephthalate (PET) substrates and showed moderate performance. This study provides low-cost, large-scale techniques to fabricate large-area PNW arrays

Potential role of {sup 68}Ga-DOTATOC PET/CT in screening for pancreatic neuroendocrine tumour in patients with von Hippel-Lindau disease

Energy Technology Data Exchange (ETDEWEB)

Prasad, Vikas; Brenner, Winfried [Charite Universitaetsmedizin Berlin, Department of Nuclear Medicine, Campus Virchow-Klinikum, Berlin (Germany); Tiling, Nikolaus; Ploeckinger, Ursula [Charite Universitaetsmedizin Berlin, Interdisziplinaeren Stoffwechsel-Centrum, Campus Virchow Klinikum, Berlin (Germany); Denecke, Timm [Charite Universitaetsmedizin Berlin, Department of Radiology, Berlin (Germany)

2016-10-15

Neuroendocrine tumours of the pancreas (pNET) are observed in 8 - 17 % of patients with von Hippel-Lindau disease (vHLD), and 11 - 20 % of these patients develop metastatic disease. MRI and CT have a very high resolution; however, their sensitivity and specificity for the detection of pNET amongst cystic lesions in the pancreas of vHLD patients are generally considered insufficient. In contrast, {sup 68}Ga-DOTATOC PET/CT demonstrates a high sensitivity for the diagnosis and staging of neuroendocrine tumours. In this study we investigated the potential role of {sup 68}Ga-DOTATOC PET/CT in screening of patients with vHLD. {sup 68}Ga-DOTATOC PET/three-phase contrast-enhanced CT was performed according to guidelines in all consecutive vHLD patients between January 2012 and November 2015. All patients underwent additional MRI imaging of the abdomen, spine, and head. Chromogranin A (CgA) was determined at the time of the PET/CT examination. A lesion seen on {sup 68}Ga-DOTATOC PET in the pancreas was defined as positive if the uptake was visually higher than in the surrounding tissues. Lesions were quantified using maximum SUV. Overall, 20 patients (8 men, 12 women; mean age 44.7 ± 11.1 years) were prospectively examined. Genetically, 12 patients had type 1 vHLD and 8 had type 2 vHLD. {sup 68}Ga-DOTATOC PET/CT detected more pNET than morphological imaging (CT or MRI): 11 patients (55 %; 8 type 1, 3 type 2) vs. 9 patients (45 %; 6 type 1, 3 type 2). The concentration of CgA was mildly elevated in 2 of 11 patients with pNET. The mean SUVmax of the pancreatic lesions was 18.9 ± 21.9 (range 5.0 - 65.6). Four patients (36.4 %) had multiple pNETs. The mean size of the lesions on CT and/or MRI was 10.4 ± 8.3 mm (range 4 - 38 mm), and 41.1 % were larger than 10 mm. In addition, somatostatin receptor-positive cerebellar and spinal haemangioblastomas were detected in three patients (SUVmax 2.1 - 10.1). One patient presented with a solitary somatostatin receptor-positive lymph

Roll-to-roll embedded conductive structures integrated into organic photovoltaic devices

International Nuclear Information System (INIS)

Van de Wiel, H J; Galagan, Y; Van Lammeren, T J; De Riet, J F J; Gilot, J; Nagelkerke, M G M; Lelieveld, R H C A T; Shanmugam, S; Pagudala, A; Groen, W A; Hui, D

2013-01-01

Highly conductive screen printed metallic (silver) structures (current collecting grids) combined with poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) are a viable replacement for indium tin oxide (ITO) and inkjet printed silver as transparent electrode materials. To provide successful integration into organic photovoltaic (OPV) devices, screen printed silver current collecting grids should be embedded into a substrate to avoid topology issues. In this study micron-thick conductive structures are embedded and integrated into OPV devices. The embedded structures are produced roll-to-roll with optimized process settings and materials. Topology measurements show that the embedded grids are well suited for integration into OPV devices since the surface is almost without spikes and has low surface roughness. JV measurements of OPV devices with embedded structures on a polyethylene terephthalate/silicon nitride (PET/SiN) substrate show an efficiency of 2.15%, which is significantly higher than identical flexible devices with ITO (1.02%) and inkjet printed silver (1.48%). The use of embedded screen printed silver instead of ITO and inkjet printed silver in OPV devices will allow for higher efficiency devices which can be produced with larger design and process freedom. (paper)

Die Rolle von Charaktereigenschaften, Umwelt und dem Genpolymorphismus des Serotonintransporters bei der Entstehung on Major Depression

OpenAIRE

Schmid, Bianca

2011-01-01

1.1 Hintergrund und Ziele Weltweit sind derzeit 121 Millionen Menschen von Depressionen betroffen. Unter diesem Krankheitsbild versteht man einen Verlust von Interesse oder Freude, depressive Verstimmung, Müdigkeit und Energieverlust, verminderte Denk- und Entscheidungsfähigkeit, Unruhe oder Verlangsamung, aber auch körperliche Symptome wie Schlafstörungen oder Appetitverlust gehören dazu. Je nach Schwere und Ausprägungsgrad der Erkrankung sind die Betroffenen in ihrem Lebensalltag enorm beei...

Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(VOxide as a PEDOT:PSS Replacement

Directory of Open Access Journals (Sweden)

Frederik C. Krebs

2011-01-01

Full Text Available The use of hydrated vanadium(Voxide as a replacement of the commonly employed hole transporting material PEDOT:PSS was explored in this work. Polymer solar cells were prepared by spin coating on glass. Polymer solar cells and modules comprising 16 serially connected cells were prepared using full roll-to-roll (R2R processing of all layers. The devices were prepared on flexible polyethyleneterphthalate (PET and had the structure PET/ITO/ZnO/P3HT:PCBM/V2O5·(H2On/Ag. The ITO and silver electrodes were processed and patterned by use of screen printing. The zinc oxide, P3HT:PCBM and vanadium(Voxide layers were processed by slot-die coating. The hydrated vanadium(Voxide layer was slot-die coated using an isopropanol solution of vanadyl-triisopropoxide (VTIP. Coating experiments were carried out to establish the critical thickness of the hydrated vanadium(Voxide layer by varying the concentration of the VTIP precursor over two orders of magnitude. Hydrated vanadium(Voxide layers were characterized by profilometry, scanning electron microscopy, energy dispersive X-ray spectroscopy, and grazing incidence wide angle X-ray scattering. The power conversion efficiency (PCE for completed modules was up to 0.18%, in contrast to single cells where efficiencies of 0.4% were achieved. Stability tests under indoor and outdoor conditions were accomplished over three weeks on a solar tracker.

„Ohne Anfang, ohne Ende, ohne Mitte“ – Gedanken zum Verhältnis von Sprache und Musik in Hans Zenders Shir hashirim

Directory of Open Access Journals (Sweden)

Peter Revers

2006-12-01

Full Text Available Hans Zenders abendfüllendes Werk Shir hashirim lässt sich als ein Komplex mehrerer, außerordentlich differenzierter Lesarten des Hoheliedes interpretieren. Dabei bilden textliche und musikalische Kohärenz (im Sinne syntaktischer und intertextueller Bezugsfelder eine ebenso wichtige Rolle wie deren Sprengung durch die Aufsplitterung von Worten und Textteilen und die Exponierung von primär klanglicher und lautsprachlicher Sonanz.

The role of F-18 FDG-PET for 3-D radiation treatment planning of non-small cell lung cancer - first results of a prospective study; Einsatz der F-18-FDG-PET in der 3-D-Bestrahlungsplanung des nichtkleinzelligen Bronchialkarzinoms: erste Ergebnisse einer prospektiven Studie

Energy Technology Data Exchange (ETDEWEB)

Schmuecking, M.; Baum, R.P.; Przetak, C.; Niesen, A. [Zentralklinik Bad Berka (Germany). Klinik fuer Nuklearmedizin/PET-Zentrum; Lopatta, E.C.; Wendt, T.G. [Jena Univ. (Germany). Klinik fuer Radiologie, Abt. Strahlentherapie; Plichta, K.; Leonhardi, J. [Zentralklinik Bad Berka (Germany). Inst. fuer Bildgebende Diagnostik

2001-04-01

Spiral-CT- und eine F-18-FDG-PET-Untersuchung innerhalb von 10 Tagen. Die PET-Daten wurden iterativ rekonstruiert, anschliessend erfolgte die Bildfusion mit den CT-Daten. Zunaechst wurden Zielvolumina und die Volumina der Risikoorgane (Lunge, Herz, Rueckenmark) basierend auf CT-Daten generiert. Anschliessend wurden erneut die Zielvolumina, basierend auf den PET-Daten errechnet. Fuer jedes Zielvolumen wurden Bestrahlungsplaene erstellt und Dosis-Volumen-Histogramme (DVH) berechnet. Durch die Integration der metabolischen PET-Zusatzinformation in die 3-D-Bestrahlungsplanung, konnten kleinere Zielvolumina bei 25 von 27 Patienten generiert werden (im Mittel um 12%, Spannbreite von 3% bis 21%). Die auf PET-Daten basierenden DVH zeigten eine Dosisreduktion an den Risikoorganen, V{sub Lunge} (20 Gy) konnte im Mittel um 10% (Spannbreite 5% bis 17%) reduziert werden. Bei 2 Patienten war das auf der PET basierende Zielvolumen groesser, als das auf der CT basierende Volumen, da im PET Lymphknotenmetastasen detektiert wurden, die im CT morphologisch unauffaellig erschienen (Groesse<10 mm). Die F-18-FDG-PET liefert nuetzliche Zusatzinformationen zu den morphologisch-anatomisch orientierten bildgeben Verfahren und ermoeglicht eine exaktere Lokalisation von Lymphknotenmetastasen und eine genauere Bestimmung der Primaertumorausdehnung. Bedingt durch kleinere Zielvolumina, konnte bei 93% der Patienten die Strahlentherapie mit kleineren, toxizitaetsaermeren Volumina durchgefuehrt werden. Andererseits ist eine komplette Tumorerfassung mit hoeherer Genauigkeit moeglich, sodass wahrscheinlich eine bessere Tumorkontrolle resultiert. Durch den Einsatz der FDG-PET in der 3-D-Bestrahlungsplanung koennte moeglicherweise die therapeutische Breite der Radiotherapie erhoeht werden. Um dies zu sichern, sind weitere Untersuchungen notwendig. (orig.)

Fully Roll-to-Roll Gravure Printable Wireless (13.56 MHz) Sensor-Signage Tags for Smart Packaging

Science.gov (United States)

Kang, Hwiwon; Park, Hyejin; Park, Yongsu; Jung, Minhoon; Kim, Byung Chul; Wallace, Gordon; Cho, Gyoujin

2014-06-01

Integration of sensing capabilities with an interactive signage through wireless communication is enabling the development of smart packaging wherein wireless (13.56 MHz) power transmission is used to interlock the smart packaging with a wireless (13.56 MHz) reader or a smart phone. Assembly of the necessary componentry for smart packaging on plastic or paper foils is limited by the manufacturing costs involved with Si based technologies. Here, the issue of manufacturing cost for smart packaging has been obviated by materials that allow R2R (roll-to-roll) gravure in combination with R2R coating processes to be employed. R2R gravure was used to print the wireless power transmission device, called rectenna (antenna, diode and capacitor), and humidity sensor on poly(ethylene terephtalate) (PET) films while electrochromic signage units were fabricated by R2R coating. The signage units were laminated with the R2R gravure printed rectenna and sensor to complete the prototype smart packaging.

Evolution of Microstructure and Texture during Annealing of Aluminum AA1050 Cold Rolled to High and Ultrahigh Strains

DEFF Research Database (Denmark)

Mishin, Oleg; Juul Jensen, Dorte; Hansen, Niels

2010-01-01

The microstructure and texture of commercial purity aluminum (AA1050) have been investigated after cold rolling to von Mises strains of 3.6 to 6.4 followed by recovery and recrystallization during annealing. The evolution of structural parameters of the deformed microstructure, such as boundary...

Einstellung und Wissen von Lehramtsstudierenden zur Evolution - ein Vergleich zwischen Deutschland und der Türkei

Science.gov (United States)

Graf, Dittmar; Soran, Haluk

Es wird eine Untersuchung vorgestellt, in der Wissen und Überzeugungen von Lehramtsstudierenden aller Fächer zum Thema Evolution an zwei Universitäten in Deutschland und der Türkei erhoben worden sind. Die Befragung wurde in Dortmund und in Ankara durchgeführt. Es stellte sich heraus, dass ausgeprägte Defizite im Verständnis der Evolutionsmechanismen herrschen. Viele Studierende, insbesondere aus der Türkei, sind nicht von der Faktizität der Evolution überzeugt. Dies gilt sowohl für Studierende mit Fach Biologie als auch für Studierende mit anderen Fächern. Näher untersucht worden sind die Faktoren, die die Überzeugungen zur Evolution beeinflussen können, was ja in Anbetracht der hohen Ablehnungsrate der Evolution von besonderem Interesse ist. Das Vertrauen in die Wissenschaft spielt hierbei eine besondere Rolle: Wer der Wissenschaft vertraut, ist auch eher von der Evolution überzeugt, als diejenigen, die skeptisch gegenüber der Wissenschaft sind.

Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(V)Oxide as a PEDOT:PSS Replacement.

Science.gov (United States)

Espinosa, Nieves; Dam, Henrik Friis; Tanenbaum, David M; Andreasen, Jens W; Jørgensen, Mikkel; Krebs, Frederik C

2011-01-11

The use of hydrated vanadium(V)oxide as a replacement of the commonly employed hole transporting material PEDOT:PSS was explored in this work. Polymer solar cells were prepared by spin coating on glass. Polymer solar cells and modules comprising 16 serially connected cells were prepared using full roll-to-roll (R2R) processing of all layers. The devices were prepared on flexible polyethyleneterphthalate (PET) and had the structure PET/ITO/ZnO/P3HT:PCBM/V₂O₅·(H₂O) n /Ag. The ITO and silver electrodes were processed and patterned by use of screen printing. The zinc oxide, P3HT:PCBM and vanadium(V)oxide layers were processed by slot-die coating. The hydrated vanadium(V)oxide layer was slot-die coated using an isopropanol solution of vanadyl-triisopropoxide (VTIP). Coating experiments were carried out to establish the critical thickness of the hydrated vanadium(V)oxide layer by varying the concentration of the VTIP precursor over two orders of magnitude. Hydrated vanadium(V)oxide layers were characterized by profilometry, scanning electron microscopy, energy dispersive X-ray spectroscopy, and grazing incidence wide angle X-ray scattering. The power conversion efficiency (PCE) for completed modules was up to 0.18%, in contrast to single cells where efficiencies of 0.4% were achieved. Stability tests under indoor and outdoor conditions were accomplished over three weeks on a solar tracker.

Medienpädagogische Gestaltungsideen zur Integration von E-Learning in der Hochschullehre

Directory of Open Access Journals (Sweden)

Ricarda T.D. Reimer

2003-08-01

Full Text Available Im ersten Teil des Artikels geht die Autorin der Frage nach, welche Rolle E-Learning an Hochschulen einnimmt. Sie nennt Projekte, die vom Bund (teilweise mit kommerzieller Beteiligung gefördert werden und äußert die These, dass E-Learning didaktischer Konzepte bedarf und somit eine Aufwertung der Pädagogik bedeuten könnte. Im Zuge des Wettbewerbs unter den Hochschulen müssten sich wissenschaftliche MitarbeiterInnen mit der Konzeptualisierung von E- Learning und folglich mit mediendidaktischen Grundlagen auseinander setzen. Im Anschluss an diese, bildungstheoretischen Ausführungen beschreibt sie detailliert ein Seminar "Bildungstheorie in der Weiterbildung", das die Universitäten Bielefeld und Flensburg gemeinsam durchführten. Im Mittelpunkt stand die Anwendung von "blended learning". Präsenzelemente wurden von Online- Phasen abgelöst und begleitet. Das Seminar wurde evaluiert und kann somit Anstöße für weitere Konzepte geben.

Combined PET/MRI in cerebral and paediatric diagnostics; Kombinierte PET/MRT-Diagnostik bei zerebralen und paediatrischen Fragestellungen

Energy Technology Data Exchange (ETDEWEB)

Pfluger, T.; Vollmar, C.; Porn, U.; Schmid, R.; Dresel, S.; Leinsinger, G.; Schmid, I.; Winkler, P.; Fischer, S.; Hahn, K. [Klinik und Poliklinik fuer Nuklearmedizin, Ludwig-Maximilians-Univ. Muenchen (Germany)

2002-07-01

The aim of this overview is presentation of MRI and PET as synergistic modalities for combined analysis of morphology and function. For operative planning in epilepsy surgery, definition of the epileptogenic focus based on functional PET diagnostics and morphological MRI is decisive. For staging and follow-up examinations in oncology, MRI should be complemented by PET for the assessment of tumor vitality. In paediatric oncology patients we could demonstrate a therapy relevant increase of sensitivity/specificity with combined PET/MRI in contrast to single modalities. In the brain, full spectrum of digital image registration and three-dimensional reconstruction should be used. In extracranial cases, image fusion is disturbing due to a partial loss of image information of single modalities by the fusion process. (orig.) [German] Ziel dieser Uebersicht ist die Darstellung der MRT und PET als synergistische Verfahren zur Analyse von Morphologie und Funktion. Zur Resektionsplanung im Rahmen der Epilepsiechirurgie ist die Definition des Epilepsiefokus anhand der funktionellen PET-Diagnostik und die exakte Kenntnis der zerebralen Morphologie aus der MRT ganz entscheidend. Im Rahmen des onkologischen Stagings und bei Verlaufskontrollen ist wegen der geringeren Spezifitaet der MRT die additive PET zur Beurteilung der Tumorvitalitaet erforderlich. Anhand eines paediatrisch-onkologischen Patientengutes konnten wir zeigen, dass mit der kombinierten PET/MRT-Diagnostik eine therapierelevante Steigerung der Sensitivitaet/Spezifitaet gegenueber den Einzeluntersuchungen moeglich ist. Bei zerebralen Fragestellungen sollte das gesamte Spektrum der digitalen Bildfusion mit direkter Ueberlagerung mehrerer Modalitaeten und anschliessender dreidimensionaler Rekonstruktion ausgeschoepft werden. Bei extrakraniellen Fragestellungen ist die direkte Bildueberlagerung eher hinderlich, da die Bildinformation der Einzelmodalitaeten durch die Fusion teilweise verloren geht. (orig.)

Gar nicht so negativ : Die funktionale Rolle von Ärger in sozialer Interaktion

NARCIS (Netherlands)

Sasse, Julia; Spears, Russell; Gordijn, Ernestine H.

2016-01-01

Ärger wird traditionell als negative Emotion klassifiziert. Die Effekte, die Ärger in sozialer Interaktion erzielen kann, können aber durchaus positive sein – es kommt ganz auf die Umstände an. Grundlegend für das Verständnis der Bedeutung von Ärger aber auch anderen Emotionen in sozialer

Fully Roll-to-Roll Gravure Printable Wireless (13.56 MHz) Sensor-Signage Tags for Smart Packaging

Science.gov (United States)

Kang, Hwiwon; Park, Hyejin; Park, Yongsu; Jung, Minhoon; Kim, Byung Chul; Wallace, Gordon; Cho, Gyoujin

2014-01-01

Integration of sensing capabilities with an interactive signage through wireless communication is enabling the development of smart packaging wherein wireless (13.56 MHz) power transmission is used to interlock the smart packaging with a wireless (13.56 MHz) reader or a smart phone. Assembly of the necessary componentry for smart packaging on plastic or paper foils is limited by the manufacturing costs involved with Si based technologies. Here, the issue of manufacturing cost for smart packaging has been obviated by materials that allow R2R (roll-to-roll) gravure in combination with R2R coating processes to be employed. R2R gravure was used to print the wireless power transmission device, called rectenna (antenna, diode and capacitor), and humidity sensor on poly(ethylene terephtalate) (PET) films while electrochromic signage units were fabricated by R2R coating. The signage units were laminated with the R2R gravure printed rectenna and sensor to complete the prototype smart packaging. PMID:24953037

Anato-metabolic fusion of PET, CT and MRI images; Anatometabolische Bildfusion von PET, CT und MRT

Energy Technology Data Exchange (ETDEWEB)

Przetak, C.; Baum, R.P.; Niesen, A. [Zentralklinik Bad Berka (Germany). Klinik fuer Nuklearmedizin/PET-Zentrum; Slomka, P. [University of Western Ontario, Toronto (Canada). Health Sciences Centre; Proeschild, A.; Leonhardi, J. [Zentralklinik Bad Berka (Germany). Inst. fuer bildgebende Diagnostik

2000-12-01

The fusion of cross-sectional images - especially in oncology - appears to be a very helpful tool to improve the diagnostic and therapeutic accuracy. Though many advantages exist, image fusion is applied routinely only in a few hospitals. To introduce image fusion as a common procedure, technical and logistical conditions have to be fulfilled which are related to long term archiving of digital data, data transfer and improvement of the available software in terms of usefulness and documentation. The accuracy of coregistration and the quality of image fusion has to be validated by further controlled studies. (orig.) [German] Zur Erhoehung der diagnostischen und therapeutischen Sicherheit ist die Fusion von Schnittbildern verschiedener tomographischer Verfahren insbesondere in der Onkologie sehr hilfreich. Trotz bestehender Vorteile hat die Bildfusion bisher nur in einzelnen Zentren Einzug in die nuklearmedizinische und radiologische Routinediagnostik gefunden. Um die Bildfusion allgemein einsetzen zu koennen, sind bestimmte technische und logistische Voraussetzungen notwendig. Dies betrifft die Langzeitarchivierung von diagitalen Daten, die Moeglichkeiten zur Datenuebertragung und die Weiterentwicklung der verfuegbaren Software, auch was den Bedienkomfort und die Dokumentation anbelangt. Zudem ist es notwendig, die Exaktheit der Koregistrierung und damit die Qualitaet der Bildfusion durch kontrollierte Studien zu validieren. (orig.)

Zur Interaktion von Genotyp und Ernährung bei Darmkrebs

OpenAIRE

Behrends, Thomas

2013-01-01

Ziel dieser Arbeit war es, sowohl die Auswirkungen einer veränderten Selenversorgung über die Nahrung als auch die Rolle des zentralen Transport- und Speicherproteins für Selen (Selenoprotein P, SepP) auf die intestinale Tumorigenese tierexperimentell zu untersuchen. Eine gestörte SepP-Expression, führte zur Ausbildung größerer Tumore. Durch eine Steigerung der Selenversorgung über die Nahrung eine signifikante Reduktion von Tumoranzahl und Gesamttumorfläche erzielt werden. Hierzu wurde den ...

PET in diagnosing exocrine pancreatic cancer; PET bei Tumoren des exokrinen Pankreas

Energy Technology Data Exchange (ETDEWEB)

Bares, R.; Besenfelder, H.; Dohmen, B.M. [Abt. Nuklearmedizin, Radiologische Klinik des Universitaetsklinikums Tuebingen (Germany)

2003-06-01

Despite dramatic improvements in diagnostic imaging (ultrasonography, in particular endoscopic ultrasound, CT, MRI) treatment results of pancreatic cancer are still poor. Due to the lack of early symptoms, most tumors are diagnosed at an advanced stage of disease which excludes curative surgical treatment. FDG-PET has been shown to be effective in detecting pancreatic cancer as well as differentiating benign from malignant pancreatic tumors. Results might be further improved by applying quantitative analyses, in particular kinetic modelling of FDG metabolism. Nevertheless false negative as well as false positive findings may occur. Small lesions (lymphnode or liver metastases < 1 cm) might be missed, furthermore hyperglycemia often present in patients with pancreatic disease might reduce tumor uptake and subsequently tumor detectability by PET. False positive findings were reported in active pancreatitis and some benign tumors. Although PET proved to be superior to CT or ERCP in detecting cancer, clinical relevance of PET is limited due to the absence of therapeutic consequences to be derived from PET. As a consequence PET should only be used in patients with equivocal findings of morphological imaging (CT, ERCP) who are potential candidates for surgical treatment. (orig.) [German] Trotz verbesserter diagnostischer Moeglichkeiten (endoskopischer Ultraschall, Spiral-CT, MRT) sind die Behandlungsergebnisse bei Tumoren des exokrinen Pankreas nach wie vor unbefriedigend. Aufgrund der spaet einsetzenden klinischen Symptomatik wird die Diagnose meist erst bei lokaler Inoperabilitaet gestellt. Die FDG-PET has sich sowohl im Nachweis von Pankreaskarzinomen als auch bei der Differenzialdiagnose pankreatischer Raumforderungen bewaehrt und den etablierten bildgebenden Verfahren (Ultraschall, CT) als ueberlegen erwiesen. Weitere Verbesserungen erscheinen durch absolute Quantifizierung der FDG-Kinetik moeglich. Dennoch koennen falsch negative wie auch falsch positive Ergebnisse

Clinical relevance of F-18 FDG PET for imaging of neuroendocrine tumors; Wertigkeit der F-18-FDG-PET bei neuroendokrinen Tumoren

Energy Technology Data Exchange (ETDEWEB)

Adams, S. [Klinikum der Ruhr-Univ. Bochum - Marienhospital, Herne (Germany). Klinik fuer Radiologie und Nuklearmedizin; Baum, R.P. [Zentralklinik Bad Berka (Germany). Klinik fuer Nuklearmedizin/PET-Zentrum; Hoer, G. [Frankfurt Univ., Frankfurt am Main (Germany). Klinik fuer Nuklearmedizin

2001-04-01

Neuroendocrine tumors are characterized immunocytochemically by the expression of different peptides and biogenic amines. Hormones induce their biological action by binding to and stimulating specific membrane-associated receptors for e.g. somatostatin. The presence of somatostatin receptors (SR) has been described mainly in endocrine glands and the central nervous system. Interestingly, a large variety of human tumors, including gastroenteropancreatic (GEP) tumors and medullary thyroid carcinomas (MTC) also express a high density of SR and can be imaged with [{sup 111}In-DTPA-D-Phe{sup 1}]-pentetreotide. Cell proliferative activity is an important indicator of the growth of various malignant tumors associated with a poorer prognosis and Ki-67 expression. {sup 18}F-FDG is a marker of tumor viability, based upon the increased glycolysis that is associated with malignancy as compared with normal tissue. SR-containing neuroendocrine tumors are well-differentiated and tend to grow slowly. Furthermore, these tumors demonstrate inverse relationship between in vivo SR expression, cell proliferation (low Ki-67 expression) and FDG uptake (normal biodistribution). In comparison, less differentiated tumors, e.g. atypical carcinoids or MTC with increasing CEA levels show mitotic activity (high levels of Ki-67 immunoreactivity and increased FDG uptake) and often lack of SR. In conclusion, SR scintigraphy has been shown to localize well-differentiated neuroendocrine tumors. In contrast, PET imaging is valuable for predicting malignancy only in less differentiated tumors with incresed glucose metabolism. Therefore, an additional F-18 FDG PET should be performed if SR scintigraphy (GEP tumors) or combined imaging using [{sup 111}In-DTPA-D-Phe{sup 1}]-pentetreotide and {sup 99m}Tc(V)-DMSA (MTC) is negative. (orig.) [German] Neuroendokrine Tumoren werden durch die spezifische Produktion von Polypeptidhormonen und biogenen Aminen klassifiziert. Die Informationsuebertragung der

Radiation exposure to the patient caused by single-photon transmission measurement for 3D whole-body PET; Die Strahlenexposition des Patienten durch die Einzelphotonen-Transmissionsmessung bei der PET

Energy Technology Data Exchange (ETDEWEB)

Schaefer, A.; Donsch, P.; Kirsch, C.M. [Universitaet des Saarlandes, Homburg/Saar (Germany). Abt. fuer Nuklearmedizin; Seifert, H. [Universitaet des Saarlandes, Homburg/Saar (Germany). Abt. Strahlentherapie der Radiologischen Klinik

2000-11-01

Patienten durch die Transmissionsmessung mittels Einzelphotonenquellen bei der PET. Material und Methode: Zwei Cs-137-Punktquellen (E{gamma}=662 keV, A=614 MBq) werden zur Transmissionsmessung im Einzelphotonenmodus an einem 3D-Scanner (ECAT ART) eingesetzt. Bei der Simulation einer Ganzkoerper-Transmission (axiale Laenge: 75 cm, 6 ueberlappende Bettpositionen), werden Dosismessungen mit Thermolumineszenzdosimetern unter Verwendung eines Thorax- und eines Abdomenphantoms durchgefuehrt. Aus den Messwerten wurde in Anlehnung an den Report Nr. 60 der ICRP die effektive Dosis fuer die Transmissionsmessung abgeschaetzt. Ergebnisse: Bei einer Gesamtaufnahmedauer von 360 min (60 min pro Bettposition) ergaben sich folgende Energiedosen: Oberflaeche (Xyphoid) 189 {mu}Gy, Herz 196 {mu}Gy, Lunge 234 {mu}Gy, BWS 240 {mu}Gy, Niere 207 {mu}Gy, Leber 204 {mu}Gy, Gonaden 205 {mu}Gy, Schilddruese 249 {mu}Gy und Blase 185 {mu}Gy, aus denen sich ein Konversionsfaktor von 1,7*10{sup -4} mSv/(h*MBq) errechnete. Die Abschaetzung der effektiven Dosis fuer den Patienten aufgrund einer Transmissionsmessung (Akquisitionszeit von 3,2 min pro Bettposition) ergab einen Wert von 11 {mu}Sv. Die Abschaetzung des Verhaeltnisses der Konversionsfaktoren durch Transmissionsmessung im Einzelphotonen- und im Koinzidenzmodus (zwei Ge-68/Ga-68-Linienquellen mit jeweils 40 MBq) ergab einen Wert von 0,18. Der Vergleich zwischen den effektiven Dosen durch die Transmission im Einzelphotonen-Modus und die Emission (bei Injektion von 250 MBq FDG) ergab ein Verhaeltnis von 2,3*10{sup -3}. Schlussfolgerung: Die Strahlenexposition der Patienten durch die Transmissionsmessung in der 3D-PET ist vernachlaessigbar gering. Sie wird durch die Verwendung der Einzelphotonenmethode mit kollimierten Punktquellen relativ hoher Aktivitaet im Vergleich zur Koinzidenzmethode mit nicht-kollimierten Linienquellen relativ niedriger Aktivitaet weiter reduziert. (orig.)

Berührt sein – Ein Fallbericht zur Rolle von WATSU (WasserShiatsu) in der Rehabilitation nach Polytrauma

OpenAIRE

Schitter, Agnes Maria; Fleckenstein, Johannes

2017-01-01

Hintergrund: Die herausragende Bedeutung von Körperkontakt für den Menschen ist bekannt und nachgewiesen. Während aber intensiver Körperkontakt in der medizinischen Versorgung von Frühgeborenen etabliert ist, wird Berührung in schulmedizinische Therapiekonzepte für Erwachsene bisher nur marginal integriert. Massnahmen aus der Komplementärmedizin berücksichtigen den individuellen Bedarf an körperlicher Nähe und leisten einen klinischen Mehrwert für den Gesundungsprozess. In besonderer Weise...

A Study on Compressive Anisotropy and Nonassociated Flow Plasticity of the AZ31 Magnesium Alloy in Hot Rolling

Directory of Open Access Journals (Sweden)

Guoqiang Wang

2014-01-01

Full Text Available Effect of anisotropy in compression is studied on hot rolling of AZ31 magnesium alloy with a three-dimensional constitutive model based on the quadratic Hill48 yield criterion and nonassociated flow rule (non-AFR. The constitutive model is characterized by compressive tests of AZ31 billets since plastic deformations of materials are mostly caused by compression during rolling processes. The characterized plasticity model is implemented into ABAQUS/Explicit as a user-defined material subroutine (VUMAT based on semi-implicit backward Euler's method. The subroutine is employed to simulate square-bar rolling processes. The simulation results are compared with rolled specimens and those predicted by the von Mises and the Hill48 yield function under AFR. Moreover, strip rolling is also simulated for AZ31 with the Hill48 yield function under non-AFR. The strip rolling simulation demonstrates that the lateral spread generated by the non-AFR model is in good agreement with experimental data. These comparisons between simulation and experiments validate that the proposed Hill48 yield function under non-AFR provides satisfactory description of plastic deformation behavior in hot rolling for AZ31 alloys in case that the anisotropic parameters in the Hill48 yield function and the non-associated flow rule are calibrated by the compressive experimental results.

Analysis of {sup 18} F-FDG uptake patterns in PET for diagnosis of septic and aseptic loosening after total hip arthroplasty

Energy Technology Data Exchange (ETDEWEB)

Cremerius, U.; Niethard, F.U. [Rheinisch-Westfaelische Technische Hochschule Aachen (Germany). Klinik fuer Nuklearmedizin; Mumme, T.; Reinartz, P.; Wirtz, D. [Rheinisch-Westfaelische Technische Hochschule Aachen (Germany). Orthopaedische Klinik; Buell, U.

2003-12-01

Aim: Identification of typical patterns for fluorodeoxyglucose (FDG) uptake in positron emission tomography (PET) to detect aseptic loosening of hip prosthesis (acetabular and/or femoral component) and prosthetic infection. Methods: 18 patients with painful hip prosthesis underwent PET using a dedicated full ring scanner after application of 200-300 MBq FDG. The interface between bone and surrounding soft tissue or bone as displayed on coronal slices was divided into 12 segments in accordance with the classifications of Delee and Gruen. FDG uptake in each of the segments was scored (0-3) by two independent observers. Intraoperative findings were regarded as the gold standard. Results: After surgical revision 14 acetabular components and 9 femoral components were found to be loose and prosthetic infection was present in 7 prostheses. Loosening of the acetabular component was correlated to enhanced uptake in the middle of the acetabular interface, while loosening of the femoral component was correlated to enhanced uptake in the proximal and middle segment of the lateral femoral interface and the proximal segment of the medial femoral interface. A similar pattern was found in prosthetic infection with high uptake along the middle portion of the lateral femoral interface. In 6 of 7 infected prostheses loosening of the acetabular and of the femoral component was present. Taking the typical uptake patterns as criteria for loosening and grade 3 uptake as an additional criterion for septic loosening the accuracy of PET imaging in the detection of loosening of the acetabular or the femoral component and of prosthetic infection was 72, 78 and 89%, respectively. Conclusion: This pilot study presents FDG-PET as a promising diagnostic tool for patients with painful hip prostheses. Its clinical value should be evaluated in a larger patient population. (orig.) [German] Ziel: Identifikation von Befundmustern in der Positronenemissionstomographie (PET) mit {sup 18}F

Reduction of radiation exposure in PET examinations by data acquisition in the 3D mode; Reduktion der Strahlenexposition bei PET-Untersuchungen durch Datenakquisition im 3D-Modus

Energy Technology Data Exchange (ETDEWEB)

Brix, G. [Bundesamt fuer Strahlenschutz, Neuherberg (Germany). Inst. fuer Strahlenhygiene]|[Deutsches Krebsforschungszentrum (DKFZ), Heidelberg (Germany). Forschungsschwerpunkt Radiologische Diagnostik und Therapie; Adam, L.E. [Department of Radiology, Philadelphia, PA (United States). Div. of Nuclear Medicine; Zaers, J.; Trojan, H.; Doll, J. [Deutsches Krebsforschungszentrum (DKFZ), Heidelberg (Germany). Forschungsschwerpunkt Radiologische Diagnostik und Therapie; Bellemann, M.E. [Deutsches Krebsforschungszentrum (DKFZ), Heidelberg (Germany). Forschungsschwerpunkt Radiologische Diagnostik und Therapie]|[Fachhochschule Jena (Germany). Fachbereich Medizintechnik; Nosske, D. [Bundesamt fuer Strahlenschutz, Neuherberg (Germany). Inst. fuer Strahlenhygiene

1999-04-01

, auf die abschirmende Wirkung von Septen zwischen den einzelnen Detektorringen (2D-Modus) zu verzichten, so dass auch koinzidente Ereignisse zwischen Detektoren auf weiter entfernt liegenden Ringen erfasst werden koennen (3D-Modus). Ziel der vorliegenden Arbeit war es, das Zaehlratenverhalten eines PET-Scanners der neuesten Generation im 2D- und im 3D-Modus anhand von Phantommessungen zu untersuchen und die sich daraus ergebenden Konsequenzen fuer die Strahlenhygiene bei PET-Untersuchungen mit 2-[F-18]-Fluor-2-Desoxyglukose (F-18-FDG) zu diskutieren. Methoden: Alle Messungen wurden am Ganzkoerper-PET-System ECAT EXACT HR{sup +} durchgefuehrt. Fuer die 2D-Messungen wurde ein Kollimator aus duennen Wolframlamellen in das Gesichtsfeld eingebracht. Das Zaehlratenverhalten des Scanners wurde dem NEMA-Protokoll folgend ueber einen weiten Bereich von F-18-Aktivitaetskonzentrationen untersucht. Darueber hinaus wurden PET-Aufnahmen des EEC-Ganzkoerperphantoms mit verschiedenen Einsaetzen im 2D- und im 3D-Modus jeweils ueber 15 min akquiriert, wobei die F-18-Aktivitaetskonzentrationen bei der 3D-Messung halb so hoch waren wie bei der 2D-Messung. Ergebnisse: Fuer das zylinderfoermige NEMA-Phantom (Durchmesser=19,4 cm, Laenge=19,0 cm) ergab sich im 3D-Modus eine im Vergleich zur 2D-Akquisition etwa fuenffach hoehere Systemsensitivitaet (27,7 statt 5,7 cps/Bq/ml). Die Auswertung der rekonstruierten Aktivitaetsverteilungen des EEC-Phantoms ergab, dass die Qualitaet der aus dem 3D-Projektionsdatensatz berechneten PET-Aufnahmen besser war als die der korrespondierenden 2D-Aufnahmen, obwohl die Aktivitaetskonzentrationen nur halb so hoch waren. Schlussfolgerungen: Durch die Datenakquisition im 3D-Modus kann die zu applizierende Aktivitaetsmenge bei gleichzeitiger Verbesserung der Bildqualitaet erheblich reduziert werden. Fuer Patientenuntersuchungen mit F-18-FDG im Ganzkoerperbereich reicht es unserer Erfahrung nach aus, eine Aktivitaet zwischen 150 und 200 MBq zu applizieren. Dies

PET in cerebrovascular disease; PET bei zerebrovaskulaeren Erkrankungen

Energy Technology Data Exchange (ETDEWEB)

Herholz, K. [Neurologische Universitaetsklinik der Univ. Koeln (Germany)]|[Max-Planck-Institut fuer Neurologische Forschung, Koeln (Germany)

1997-03-01

Tissue viability is of particular interest in acute cerebral ischemia because it may be preserved if reperfusion can be achieved rapidly, e.g. by acute thrombolysis. Measurements of regional cerebral blood flow (CBF) and oxygen consumption by PET can assess tissue viability, and they have substantially increased our knowledge of th pathophysiology of ischemic stroke and the associated penumbra. Widerspread clinical application in acute stroke, however, is unlikely because of the large logistic and personnel resources required. In chronic cerebrovascular disease, measurement of regional CBF and glucose metabolism, which is usually coupled, provide detailed insights in disturbance of cortical function, e.g. due to deafferentiation, and contribute to differentiation of dementia types. Chronic misery perfusion, i.e. reduced perfusion that does not match the metabolic demand of the tissue, can be demonstrated by PET. It may be found in some patients with high-grade arterial stenoses. Less severe impairment of brain perfusion can be demonstrated by measurement of the cerebrovascular reserve capacity. The most frequent clinical situations can be assessed by less demanding procedures, e.g. by SPECT. In conclusion, PET has its role in cerebrovascular disease primarily within scientific studies, where high resolution and absolute quantitation of physiological variables are essential. (orig.). 65 refs. [Deutsch] Beim akuten ischaemischen Insult ist die Vitalitaet des Gewebes von besonderem Interesse, da sie durch rasche Reperfusion, z.B. durch Thrombolyse, erhalten bleiben kann. Messungen der zerebralen Durchblutung und des Sauerstoffumsatzes mittels PET geben darueber wesentliche Aufschluesse, und sie sind wichtig fuer das Verstaendnis der Pathophysiologie ischaemischer Infarkte und der Penumbra mit kritischer Perfusion beim Menschen. Ihre breitere Anwendung in der klinischen Patientenversorgung kommt allerdings wegen des hohen Aufwandes derzeit kaum in Betracht. Bei

Roll force prediction of high strength steel using foil rolling theory in cold skin pass rolling

International Nuclear Information System (INIS)

Song, Gil Ho; Jung, Jae Chook

2013-01-01

Skin pass rolling is a very important process for applying a certain elongation to a strip in the cold rolling and annealing processes, which play an important role in preventing the stretching of the yield point when the material is processed. The exact prediction of the rolling force is essential for obtaining a given elongation with the steel grade and strip size. Unlike hot rolling and cold rolling, skin pass rolling is used to apply an elongation of within 2% to the strip. Under a small reduction, it is difficult to predict the rolling force because the elastic deformation behavior of the rolls is complicated and a model for predicting the rolling force has not yet been established. Nevertheless, the exact prediction of the rolling force in skin pass rolling has gained increasing importance in recent times with the rapid development of high strength steels for use in automobiles. In this study, the possibility of predicting the rolling force in skin pass rolling for producing various steel grades was examined using foil rolling theory, which is known to have similar elastic deformation behavior of rolls in the roll bite. It was found that a noncircular arc model is more accurate than a circular model in predicting the roll force of high strength steel below TS 980 MPa in skin pass rolling

Geometrische und stochastische Modelle zur Verarbeitung von 3D-Kameradaten am Beispiel menschlicher Bewegungsanalysen

OpenAIRE

Westfeld, Patrick

2012-01-01

Die dreidimensionale Erfassung der Form und Lage eines beliebigen Objekts durch die flexiblen Methoden und Verfahren der Photogrammetrie spielt für ein breites Spektrum technisch-industrieller und naturwissenschaftlicher Einsatzgebiete eine große Rolle. Die Anwendungsmöglichkeiten reichen von Messaufgaben im Automobil-, Maschinen- und Schiffbau über die Erstellung komplexer 3D-Modelle in Architektur, Archäologie und Denkmalpflege bis hin zu Bewegungsanalysen in Bereichen der Strömungsmesstech...

A model for prediction of profile and flatness of hot and cold rolled flat products in four-high mills

Science.gov (United States)

Overhagen, Christian; Mauk, Paul Josef

2018-05-01

For flat rolled products, the thickness profile in the transversal direction is one of the most important product properties. For further processing, a defined crown of the product is necessary. In the rolling process, several mechanical and thermal influences interact with each other to form the strip shape at the roll gap exit. In the present analysis, a process model for rolling of strip and sheet is presented. The core feature of the process model is a two-dimensional stress distribution model based on von Karman's differential equation. Sub models for the mechanical influences of work roll flattening as well as work and backup roll deflection and the thermal influence of work roll expansion have been developed or extended. The two-dimensional stress distribution serves as an input parameter for the roll deformation models. For work roll flattening, a three-dimensional model based on the Boussinesq problem is adopted, while the work and backup roll deflection, including contact flattening is calculated by means of finite beam elements. The thermal work roll crown is calculated with help of an axisymmetric numerical solution of the heat equation for the work roll, considering azimuthal averaging for the boundary conditions at the work roll surface. Results are presented for hot rolling of a strip in a seven-stand finishing train of a hot strip mill, showing the calculated evolution of the strip profile. A variation of the strip profile from the first to the 20th rolled strip is shown. This variation is addressed to the progressive increase of work roll temperature during the first 20 strips. It is shown that a CVC® system can lead to improvements in strip profile and therefore flatness.

PET with coincidence gamma cameras - clinical benefit from the radiooncologists' point of view; PET mit Koinzidenz-Gammakameras - klinischer Nutzen aus der Sicht des Radioonkologen

Energy Technology Data Exchange (ETDEWEB)

Richter, E; Feyerabend, T; Stallmann, C; Lauer, I; Baehre, M [Universitaetsklinikum Luebeck (Germany). Klinik fuer Strahlentherapie und Nuklearmedizin

2001-11-01

Positron emission tomography with FDG (FDG-PET) is a new technique, which displays the cellular metabolic activity. Since tumors exhibit an increased metabolic activity when compared to normal tissue, this imaging modality has a particularly high importance. FDG-PET is not only useful for localizing and staging of malignant tumors, but also to evaluate therapy response. In this context, PET is superior to morphologically orientated modalities, because therapeutically induced changes in glucose metabolism precede morphologic alterations. Numerous studies indicate, that PET will play an important role in radiooncology concerning therapy planning and monitoring the effects of therapy during and after treatment. Further clinical studies are necessary to evaluate the information provided by FDG-PET more precisely. Coincidence gamma cameras with adequate imaging characteristics will gain enhanced importance to meet these increasing demands. (orig.) [German] Die Positronenemissionstomographie mit FDG (FDG-PET) ist ein neues Verfahren, das die Stoffwechselaktivitaet von Zellen bildlich wiedergibt. Da Tumorgewebe im Vergleich zu normalem Gewebe einen erhoehten Stoffwechsel aufweist, hat dieses Untersuchungsverfahren in der Onkologie einen besonders hohen Stellenwert. Neben der Lokalisations- und Ausbreitungsdiagnostik eignet sich die FDG-PET zur Erfolgsbeurteilung. Die PET ist hierin den anderen morphologischen Verfahren ueberlegen, da die Veraenderungen des Glukosemetabolismus durch therapeutische Massnahmen morphologischen Veraenderungen vorausgehen. Zahlreiche Untersuchungen lassen erkennen, dass die PET fuer die Radioonkologie einen wichtigen Stellenwert einnehmen wird. Dies betrifft die Bestrahlungsplanung und das Therapiemonitoring waehrend und nach einer Behandlung. Weitere klinische Studien sind notwendig, um die Aussagekraft der FDG-PET besser zu evaluieren. Den Koinzidenz-Gammakameras mit adaequaten Bildgebungseigenschaften kommt eine zunehmende Bedeutung zu, um

Inclusion of PET-CT into planning of primary or neoadjuvant chemoradiotherapy of esophageal cancer improves prognosis

Energy Technology Data Exchange (ETDEWEB)

Metzger, Jan-Christopher; Vaupel, Peter; Schmidberger, Heinz; Mayer, Arnulf [University Medical Center, Department of Radiation Oncology and Radiotherapy, Mainz (Germany); Wollschlaeger, Daniel [University Medical Center, Institute of Medical Biostatistics, Epidemiology and Informatics (IMBEI), Mainz (Germany); Miederer, Matthias [University Medical Center, Department of Nuclear Medicine, Mainz (Germany); Moehler, Markus [University Medical Center, Department of Internal Medicine I, Mainz (Germany)

2017-10-15

data suggest for the first time that the use of PET-CT in the framework of staging and planning of primary or neoadjuvant chemoradiotherapy for esophageal cancer has a favorable impact on patient survival. (orig.) [German] Die Positronenemissionstomographie-Computertomographie (PET-CT) ist heute sowohl im Staging als auch in der Bestrahlungsplanung im Rahmen der primaeren oder neoadjuvanten Radiochemotherapie bei Oesophaguskarzinom weit verbreitet. Sie fuehrt haeufig zu Veraenderungen des strahlentherapeutischen Zielvolumens. Im Falle der Detektion von Fernmetastasen kann sie auch den Wechsel zu einem palliativen Konzept nach sich ziehen. So wird Patienten eine therapieassoziierte Toxizitaet erspart, der kein entsprechender Nutzen gegenuebersteht. Ob die PET-CT hierdurch jedoch einen nachweisbar guenstigen Einfluss auf das Ueberleben der Patienten nimmt, ist aufgrund fehlender Studien zum gegenwaertigen Zeitpunkt nicht klar. Retrospektiv wurden die Ueberlebensdaten von 145 Patienten mit Oesophaguskarzinomen der Stadien I (8 Patienten; 5 %), II (45; 31 %), III (79; 55 %) und IV (8; 5 %) sowie mit unbekanntem Stadium (5; 4 %) analysiert. Die Patienten hatten zwischen 1999 und 2014 in der Klinik fuer Radioonkologie der Universitaetsmedizin Mainz entweder eine primaere Radiochemotherapie (n = 101) oder eine neoadjuvante Radiochemotherapie erhalten, gefolgt von einer transabdominalen oder transthorakalen Tumorresektion (n = 44). 64 von insgesamt 145 Patienten (44 %) hatten eine PET-CT erhalten. Der Einsatz der PET-CT war in der univariaten Analyse mit einem signifikant laengeren lokalrezidivfreien Ueberleben (p = 0,006) und einem Trend hin zu einem messbar laengeren Gesamtueberleben (p = 0,071) assoziiert. Im Kollektiv der Patienten mit PET-CT wurden signifikant mehr Patienten operiert (20 % vs. 44 %; p = 0,002). Um einen moeglichen Confounder-Effekt auszuschliessen, wurde eine multivariate Cox-Regression unter Einschluss dieser beiden Variablen durchgefuehrt. Hier zeigte

PET in patients with clear-cut multiple chemical sensitivity (MCS); PET bei Patienten mit klar definierter multipler chemischer Sensibilitaet (MCS)

Energy Technology Data Exchange (ETDEWEB)

Bornschein, S. [Toxikologische Abt. der II. Medizinischen Klinik und Poliklinik der Technischen Univ. Muenchen, Klinikum rechts der Isar, Muenchen (Germany); Klinik und Poliklinik fuer Psychiatrie und Psychotherapie der Technischen Univ. Muenchen, Klinikum rechts der Isar, Muenchen (Germany); Hausteiner, C.; Foerstl, H. [Klinik und Poliklinik fuer Psychiatrie und Psychotherapie der Technischen Univ. Muenchen, Klinikum rechts der Isar, Muenchen (Germany); Drzezga, A.; Schwaiger, M. [Nuklearmedizinische Klinik und Poliklinik der Technischen Univ. Muenchen, Klinikum rechts der Isar, Muenchen (Germany); Bartenstein, P. [Klinik und Poliklinik fuer Nuklearmedizin, Universitaetsklinikum Mainz (Germany); Zilker, Th. [Toxikologische Abt. der II. Medizinischen Klinik und Poliklinik der Technischen Univ. Muenchen, Klinikum rechts der Isar, Muenchen (Germany)

2002-12-01

Aim: Multiple chemical sensitivity (MCS) is a controversially discussed symptom complex. Patients afflicted by MCS react to very low and generally non-toxic concentrations of environmental chemicals. It has been suggested that MCS leads to neurotoxic damage or neuroimmunological alteration in the brain detectable by positron emission tomography (PET) and single photon emission computer tomography (SPECT). These methods are often applied to MCS patients for diagnosis, although they never proved appropriate. Method: We scanned 12 MCS patients with PET, hypothesizing that it would reveal abnormal findings. Results: Mild glucose hypometabolism was present in one patient. In comparison with normal controls, the patient group showed no significant functional brain changes. Conclusion: This first systematic PET study in MCS patients revealed no hint of neurotoxic or neuroimmunological brain changes of functional significance. (orig.) [German] Ziel: Multiple chemische sensibilitaet (MCS) ist ein umstrittenes Krankheitsbild, das durch Reaktionen auf geringe, fueer Normalpersonen unschaedliche Mengen an Umweltchemikalien gekennzeichnet ist. Es wurde postuliert, dass MCS zu neurotoxischer Schaedigung bzw. neuroimmunologischer Veraenderung im Gehirn fuehrt, die mittels funktioneller bildgebender Verfahren, z. B. positronenemissionstomographie (PET), single-photon-emissions-computer-tomographie (SPECT) dargestellt werden koennte. Obwohl hierfuer kein wissenschaftlicher Beleg erbracht wurde, werden diese Methoden vielfach diagnostisch bei MCS-Patienten eingesetzt. Methode: Wir untersuchten 12 MCS-Patienten mit PET, um etwaige funktionelle Hirnveraenderungen nachzuweisen. Ergebnisse: Im Einzelvergleich war bei einem Patienten ein diskreter Glukose-Hypometabolismus in einzelnen Hirnregionen vorhanden. Im Gruppenvergleich konnte keine signifikante Abweichung von der Norm gefunden werden. Schlussfolgerung: Diese erste systematische PET-Studie bei MCS-Patienten erbrachte keinen

Roll-to-Roll sputtered ITO/Cu/ITO multilayer electrode for flexible, transparent thin film heaters and electrochromic applications.

Science.gov (United States)

Park, Sung-Hyun; Lee, Sang-Mok; Ko, Eun-Hye; Kim, Tae-Ho; Nah, Yoon-Chae; Lee, Sang-Jin; Lee, Jae Heung; Kim, Han-Ki

2016-09-22

We fabricate high-performance, flexible, transparent electrochromic (EC) films and thin film heaters (TFHs) on an ITO/Cu/ITO (ICI) multilayer electrode prepared by continuous roll-to-roll (RTR) sputtering of ITO and Cu targets. The RTR-sputtered ICI multilayer on a 700 mm wide PET substrate at room temperature exhibits a sheet resistance of 11.8 Ω/square and optical transmittance of 73.9%, which are acceptable for the fabrication of flexible and transparent EC films and TFHs. The effect of the Cu interlayer thickness on the electrical and optical properties of the ICI multilayer was investigated in detail. The bending and cycling fatigue tests demonstrate that the RTR-sputtered ICI multilayer was more flexible than a single ITO film because of high strain failure of the Cu interlayer. The flexible and transparent EC films and TFHs fabricated on the ICI electrode show better performances than reference EC films and TFHs with a single ITO electrode. Therefore, the RTR-sputtered ICI multilayer is the best substitute for the conventional ITO film electrode in order to realize flexible, transparent, cost-effective and large-area EC devices and TFHs that can be used as flexible and smart windows.

Rolling Process Modeling Report: Finite-Element Prediction of Roll Separating Force and Rolling Defects

Energy Technology Data Exchange (ETDEWEB)

Soulami, Ayoub [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Paxton, Dean M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burkes, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-04-23

Pacific Northwest National Laboratory (PNNL) has been investigating manufacturing processes for the uranium-10% molybdenum (U-10Mo) alloy plate-type fuel for the U.S. high-performance research reactors. This work supports the Convert Program of the U.S. Department of Energy’s National Nuclear Security Administration (DOE/NNSA) Global Threat Reduction Initiative. This report documents modeling results of PNNL’s efforts to perform finite-element simulations to predict roll separating forces and rolling defects. Simulations were performed using a finite-element model developed using the commercial code LS-Dyna. Simulations of the hot rolling of U-10Mo coupons encapsulated in low-carbon steel have been conducted following two different schedules. Model predictions of the roll-separation force and roll-pack thicknesses at different stages of the rolling process were compared with experimental measurements. This report discusses various attributes of the rolled coupons revealed by the model (e.g., dog-boning and thickness non-uniformity).

Active safety of industrial vehicles - status report 2003; Stand der aktiven Sicherheit von Nutzfahrzeugen - Statusreport 2003

Energy Technology Data Exchange (ETDEWEB)

Glasner, E.C. von [DaimlerChrysler AG, Stuttgart (Germany)

2003-07-01

Systematic improvement of the safety of industrial vehicles will require the enhanced use of intelligent mechatronic systems, especially those that ensure higher directional stability. Further, improved tyres are required for making full use of these systems. Research on tyre improvements should focus on directional stability without neglecting classic parameters like wear, grip, and comfort. Last but not least, all systems should be available at reasonable cost. [German] Der systematische Weg, um die aktive Sicherheit von Nutzfahrzeugen weiter zu verbessern, wird mehr und mehr den Einsatz von intelligenten mechatronischen Systemen erfordern, besonders bei Systemen fuer die Verbesserung von Fahrstabilitaet von Einzelfahrzeugen und Lastzuegen. Hier spielt in kritischen fahrdynamischen Situationen aber auch die Leistungsfaehigkeit des Reifens eine grosse Rolle. Die Vorteile solcher Sicherheitssysteme koennen deshalb nur genutzt werden, wenn die Leistungsfaehigkeit der Reifen weiter gesteigert werden kann, d.h. die Betonung bei der Reifenentwicklung fuer Nutzfahrzeuge muss auf der Erhoehung der uebertragbaren Seiten- und Laengskraefte unter Beibehaltung des heutigen Schraegwinkel - und Schlupfniveaus liegen. Selbstverstaendlich darf eine solche Weiterentwicklung nicht die ueblichen Reifenparameter, wie z.B. Verschleiss, Rollwiderstand und Komfort negativ beeinflussen. Ein abschliessender Aspekt in diesem Prozess, den man nicht ignorieren kann, ist der Einsatz aller sicherheitsbezogenen Systeme zu einem vernuenftigen und akzeptablen Preis, wobei gleichzeitig die ganzheitliche Oekonomie des Nutzfahrzeugs positiv beeinflusst werden sollte. (orig.)

Zr-89-Bevacizumab PET Visualizes Disease Manifestations in Patients with von Hippel-Lindau Disease

NARCIS (Netherlands)

Oosting, Sjoukje F.; van Asselt, Sophie J.; Brouwers, Adrienne H.; Bongaerts, Alfons H. H.; Steinberg, Julia D. J.; de Jong, Johan; Lub-de Hooge, Marjolijn N.; Horst-Schrivers, van der Anouk N. A.; Walenkamp, Annemiek M. E.; Hoving, Eelco W.; Sluiter, Wim J.; Zonnenberg, Bernard A.; de Vries, Elisabeth G. E.; Links, Thera P.

2016-01-01

Patients with von Hippel-Lindau disease (VHL) are at risk to develop multiple tumors. The growth of lesions is unpredictable, and regular surveillance is critical for early treatment to control local damage. Vascular endothelial growth factor A (VEGF-A) produced locally is supposed to play an

NUMERICAL EVALUATION OF TEMPERATURE DISTRIBUTION IN THE ROLLING MILL ROLLS

Directory of Open Access Journals (Sweden)

José Claudino de Lira Júnior

2013-06-01

Full Text Available In hot rolling processes occur changes in the profile of the rolling mill rolls (expansion and contraction and constant wear due to mechanical stress and continuous thermal cycles of heating/cooling caused by contact rolled material- working roll and the cooling system by water jets in their surface, decreasing their lifetime. This paper presents a computational model to simulate the thermal performance of rolling mill rolls. The model was developed using the finite volume method for a transient two-dimensional system and allows calculating the temperature distribution of the rolling mill rolls under various conditions of service. Here it is investigated the influence of flow rate and temperature of the cooling water on the temperature distribution. The results show that the water temperature has greater influence than the water flow to control the surface temperature of the cylinders.

Up-scaling perovskite solar cell manufacturing from sheet-to-sheet to roll-to-roll: challenges and solutions

Science.gov (United States)

Di Giacomo, Francesco; Galagan, Yulia; Shanmugam, Santhosh; Gorter, Harrie; van den Bruele, Fieke; Kirchner, Gerwin; de Vries, Ike; Fledderus, Henri; Lifka, Herbert; Veenstra, Sjoerd; Aernouts, Tom; Groen, Pim; Andrissen, Ronn

2017-08-01

Organometallic halide perovskite solar cells (PSCs) are extremely promising novel materials for thin-film photovoltaics, exhibiting efficiencies over 22% on glass and over 17% on foil 1, 2 . First, a sheet-to-sheet (S2S) production of PSCs and modules on 152x152 mm2 substrates was established, using a combination of sputtering, e-beam evaporation, slot die coating and thermal evaporation (average PCE of 14.6 +/- 1.3 % over 64 devices, more than 10% initial PCE on modules). Later the steps towards a roll-to-roll production will be investigated, starting from the optimization of the stack to make it compatible with a faster production at low temperature. A water based SnOx nanoparticles dispersion was used as solution processable ETL, and the deposition process was scaled-up from spin coating to R2R slot die coating on a 300 mm wide roll of PET/ITO. R2R production is often carried out in ambient atmosphere and involve the use of large volumes of materials, thus a first point is the development of a green solvent and precursor system for the perovskite layer to prevent the emission of toxic compound in the environment. The first results on device fabrication are encouraging, which allow partial R2R manufacturing of flexible PSC (R2R coating of SnOx and perovskite, S2S for Spiro-OMeTAD and gold) with stabilized PCE of 12.6%, a remarkable value for these novel devices. This result can be considered an important milestone towards the production of efficient, low cost, lightweight, flexible PSC on large area.

Finite element analysis of plate rolling of duplex-layer steels for long-period fast reactor application

International Nuclear Information System (INIS)

Lee, Jungki; Kim, Ji Hyun

2015-01-01

With same roll speed and same friction coefficient, curvature is formed on rolled product from FEA result. To reduce this curvature and plastic strain which cause reduction in fabricability, two ways are selected; (i) controlling upper/lower roll speed, and (ii) adjusting upper/lower friction coefficient and contacts. Both results shows it can reduce the curvature and equivalent plastic strain of the plate after the rolling. It can be applied in real plate rolling processing and also the next research for pilgering process for tube and pipe production. The FEA results of equivalent stress and plastic deformation distribution are showed in figure 5. The von-Mises equivalent stress distribution showed that the stress is still concentrated on upper Fe-12Cr-2Si layer, however, it also shows that equivalent plastic strain is distributed uniformly comparing with upper and lower roll speed ratio is 1.0. In high temperature liquid metal environment, there are usually two types of corrosion; one is corrosion by dissolution of alloy elements into liquid metal, and another is corrosion by chemical reaction among impurities in liquid metal and structural alloy. There have been some researches to develop new alloys that can form more dense scale on the surface even in wider impurity range and higher temperature range . M.P Short et al. devised functionally graded composite which is composed of two layers . one is a thin corrosion resistant layer and another is thick structural layer which guarantees mechanical strength, creep rupture strength and shows less irradiation swelling

The effect of roll with passive segment on the planetary rolling process

Directory of Open Access Journals (Sweden)

Qing-Ling Zeng

2015-03-01

Full Text Available In three-roll planetary rolling process, there is secondary torsion phenomenon that may lead to rolling instability. This article proposed a new idea to alleviate the secondary torsion phenomenon by dividing the secondary torsion segment out of the roll as an independent and passive one. To study the performance of the roll with passive segment, the three-dimensional finite element models of planetary rolling process using actual roll or new roll with passive segment involving elastic–plastic and thermal–mechanical coupling were established by the software ABAQUS/Explicit, and a series of analysis had been done successfully. The rolling temperature and rolling force of planetary mill were in good agreement with the measured results, which indicated that the finite element method would supply important reference merit for three-dimensional thermo-mechanical simulation of the three-roll planetary rolling process. Comparing the simulation results of the two models, the results indicated that the change in the roll structure had just a little influence on the metal deformation, temperature, and rolling force, but it lessened the secondary torsion deformation effectively and improved the outside roundness of the rolled tube slightly. The research provided a new idea for the roll design of three-roll planetary mill (PSW.

F-18-FDG PET of the thyroid in Graves` disease; F-18-FDG-PET der Schilddruese bei Morbus Basedow

Energy Technology Data Exchange (ETDEWEB)

Boerner, A.R.; Voth, E.; Schicha, H. [Klinik und Poliklinik fuer Nuklearmedizin, Koeln Univ. (Germany); Wienhard, K.; Wagner, R. [Max-Planck-Institut fuer Neurologische Forschung, Koeln (Germany)

1998-12-31

This study evaluates F-18-FDG PET of the thyroid in Graves` disease. Methods: Thirty patients were investigated the day before radioiodine therapy, 15 patients 3-10 days after radioiodine therapy. Twenty patients with cancer of the head or neck and normal thyroid function served as controls. Results: F-18-FDG uptake was higher in Graves` disease patients than in controls. Negative correlations of F-18-FDG uptake with half-life of radioiodine and absorbed radiation dose due to radioiodine therapy were found along with a positive correlation to autoantibody levels. Conclusion: Thus F-18-FDG PET is likely to give information on the biological activity of Graves` disease as well as on early radiation effects. (orig.) [Deutsch] Ziel: Diese Studie evaluiert F-18-Fluoro-Deoxy-Glukose (F-18-FDG) PET der Schilddruese bei Patienten mit M. Basedow. Methoden: 30 Patienten wurden am Tag vor Radioiod-Therapie, 15 Patienten am 3.-10. Tag nach Radioiodtherapie untersucht. 20 Patienten mit Kopf/Halstumoren und normaler Schilddruesenfunktion dienten als Kontrollgruppe. Ergebnisse: Die F-18-FDG-Aufnahme in der Schilddruese war signifikant hoeher bei Patienten mit M-Basedow im Vergleich zu den Kontrollen. Sie stieg mit hoeheren, antithyreoidalen Antikoerpern und sank bei laengerer I-131-Halbwertzeit. Es bestand eine Korrelation einer reduzierten Glukose-Utilisation bei hoeherer absorbierter Schilddruesendosis nach Radioiod-Therapie. Schlussfolgerung: Damit erscheint die F-18-FDG-PET-Untersuchung zur biologischen Aktivitaetsbeurteilung des M. Basedow und Darstellung von fruehen Strahleneffekten geeignet. (orig.)

The effect of roll gap geometry on microstructure in cold-rolled aluminum

DEFF Research Database (Denmark)

Mishin, Oleg; Bay, B.; Winther, G.

2004-01-01

Microstructure and texture are analyzed through the thickness of two aluminum plates cold-rolled 40% with different roll gap geometries. It is found that both texture and microstructure are strongly affected by the rolling geometry. After rolling with intermediate-size draughts a rolling-type tex......Microstructure and texture are analyzed through the thickness of two aluminum plates cold-rolled 40% with different roll gap geometries. It is found that both texture and microstructure are strongly affected by the rolling geometry. After rolling with intermediate-size draughts a rolling...... layers. In these layers, extended planar dislocation boundaries are frequently found to be inclined closely to the rolling direction. The subsurface and central layers of this plate exhibit microstructures similar to those in the plate rolled with intermediate draughts. It is suggested...

von Neumann Morgenstern Preferences

DEFF Research Database (Denmark)

Vind, Karl

von Neumann Morgenstern utility is generalized to von Neumann Morgenstern preferences. The proof is an application of simple hyperplane theorems......von Neumann Morgenstern utility is generalized to von Neumann Morgenstern preferences. The proof is an application of simple hyperplane theorems...

von Neumann Morgenstern Preferences

DEFF Research Database (Denmark)

Vind, Karl

2000-01-01

von Neumann Morgenstern utility is generalized to von Neumann Morgenstern preferences. The proof is an application of simple hyperplane theorems......von Neumann Morgenstern utility is generalized to von Neumann Morgenstern preferences. The proof is an application of simple hyperplane theorems...

RELATIONSHIP BETWEEN ROLLING AND SLIP RESISTANCE IN ROLLING BEARINGS

Directory of Open Access Journals (Sweden)

L. M. Bondarenko

2016-06-01

Full Text Available Purpose. About one of the causes of slip rolling is known from the second half of the 19th century, it was believed that the slip resistance appears at the place of contact due to different speeds on the arc of contact. Only in the mid-20th century it was proved that this resistance is negligible in rolling resistance. However (for some unknown reason it is ignored the fact that in practice in rolling bearings may rotate both the inner ring with a stationary outer one, and vice versa almost in equal relations. It is not taken into account the fact that the ball or roller in the rolling bearings runs the different distance along the roller path of the outer and inner bearing cages in one revolution. This fact is not taken into account in determining the calculated values for the friction coefficient of a rolling bearing reduced to the shaft. Therefore, the aim of this work is to determine the influence of path length on the track riding the outer and inner race of the bearing on the determination of the calculated value of the coefficient of friction of rolling bearings is given to the shaft. Methodology. The solution technique is based on the theory of plane motion of a rigid body, the theory of Hertzian contact deformation and the analytical dependencies for determination of coefficient of rolling friction. Findings. The obtained dependences on determination of rolling resistance of the balls or rollers along the bearing tracks of inner and outer bearing cages as well as path difference metering of the rolling on them allows to analytically obtain the rolling resistance and slipping for any size of bearings and different devices of bearing units. It is also possible at the design stage of rolling nodes to handle not only the design but also the content of the node. Originality. Using the analytical dependences for determination of the rolling resistance of bodies at point and line contacts, and also account for the difference in the path of the

Roll-to-Roll production of carbon nanotubes based supercapacitors

Science.gov (United States)

Zhu, Jingyi; Childress, Anthony; Karakaya, Mehmet; Roberts, Mark; Arcilla-Velez, Margarita; Podila, Ramakrishna; Rao, Apparao

2014-03-01

Carbon nanomaterials provide an excellent platform for electrochemical double layer capacitors (EDLCs). However, current industrial methods for producing carbon nanotubes are expensive and thereby increase the costs of energy storage to more than 10 Wh/kg. In this regard, we developed a facile roll-to-roll production technology for scalable manufacturing of multi-walled carbon nanotubes (MWNTs) with variable density on run-of-the-mill kitchen Al foils. Our method produces MWNTs with diameter (heights) between 50-100 nm (10-100 μm), and a specific capacitance as high as ~ 100 F/g in non-aqueous electrolytes. In this talk, the fundamental challenges involved in EDLC-suitable MWNT growth, roll-to-roll production, and device manufacturing will be discussed along with electrochemical characteristics of roll-to-roll MWNTs. Research supported by NSF CMMI Grant1246800.

Positron Emission Tomography (PET) and breast cancer in clinical practice

International Nuclear Information System (INIS)

Lavayssiere, Robert; Cabee, Anne-Elizabeth; Filmont, Jean-Emmanuel

2009-01-01

The landscape of oncologic practice has changed deeply during the past few years and there is now a need, through a multidisciplinary approach, for imaging to provide accurate evaluation of morphology and function and to guide treatment (Image Guided Therapy). Increasing emphasis has been put on Position Emission Tomography (PET) role in various cancers among clinicians and patients despite a general context of healthcare expenditure limitation. Positron Emission Tomography has currently a limited role in breast cancer, but also general radiologists and specialists should be aware of these indications, especially when staging aggressive cancers and looking for recurrence. Currently, the hybrid systems associating PET and Computed Tomography (CT) and in the same device [Rohren EM, Turkington TG, Coleman RE. Clinical applications of PET in oncology. Radiology 2004;231:305-32; Blodgett TM, Meltzer CM, Townsend DW. PET/CT: form and function. Radiology 2007;242:360-85; von Schulthess GK, Steinert HC, Hany TF. Integrated PET/CT: current applications and futures directions. Radiology 2006;238(2):405-22], or PET-CT, are more commonly used and the two techniques are adding their potentialities. Other techniques, MRI in particular, may also compete with PET in some instance and as far as ionizing radiations dose limitation is considered, some breast cancers becoming some form of a chronic disease. Breast cancer is a very complex, non-uniform, disease and molecular imaging at large may contribute to a better knowledge and to new drugs development. Ongoing research, Positron Emission Mammography (PEM) and new tracers, are likely to bring improvements in patient care [Kelloff GJ, Hoffman JM, Johnson B, et al. Progress and promise of FDG-PET Imaging for cancer patient management and oncologic drug development. Clin Cancer Res 2005;1(April (8)): 2005

Positron Emission Tomography (PET) and breast cancer in clinical practice

Energy Technology Data Exchange (ETDEWEB)

Lavayssiere, Robert [Centre d' Imagerie Paris-Nord, 1, avenue Charles Peguy, 95200 Sarcelles (France); Institut du Sein Henri Hartmann (ISHH), 1, rue des Dames Augustines, 92200 Neuilly sur Seine (France)], E-mail: cab.lav@wanadoo.fr; Cabee, Anne-Elizabeth [Centre d' Imagerie Paris-Nord, 1, avenue Charles Peguy, 95200 Sarcelles (France); Institut du Sein Henri Hartmann (ISHH), 1, rue des Dames Augustines, 92200 Neuilly sur Seine (France); Centre RMX, 80, avenue Felix Faure, 75105 Paris (France); Filmont, Jean-Emmanuel [Institut du Sein Henri Hartmann (ISHH), 1, rue des Dames Augustines, 92200 Neuilly sur Seine (France); American Hospital of Paris, Nuclear Medicine, 63, boulevard Victor Hugo - BP 109, 92202 Neuilly sur Seine Cedex (France)

2009-01-15

The landscape of oncologic practice has changed deeply during the past few years and there is now a need, through a multidisciplinary approach, for imaging to provide accurate evaluation of morphology and function and to guide treatment (Image Guided Therapy). Increasing emphasis has been put on Position Emission Tomography (PET) role in various cancers among clinicians and patients despite a general context of healthcare expenditure limitation. Positron Emission Tomography has currently a limited role in breast cancer, but also general radiologists and specialists should be aware of these indications, especially when staging aggressive cancers and looking for recurrence. Currently, the hybrid systems associating PET and Computed Tomography (CT) and in the same device [Rohren EM, Turkington TG, Coleman RE. Clinical applications of PET in oncology. Radiology 2004;231:305-32; Blodgett TM, Meltzer CM, Townsend DW. PET/CT: form and function. Radiology 2007;242:360-85; von Schulthess GK, Steinert HC, Hany TF. Integrated PET/CT: current applications and futures directions. Radiology 2006;238(2):405-22], or PET-CT, are more commonly used and the two techniques are adding their potentialities. Other techniques, MRI in particular, may also compete with PET in some instance and as far as ionizing radiations dose limitation is considered, some breast cancers becoming some form of a chronic disease. Breast cancer is a very complex, non-uniform, disease and molecular imaging at large may contribute to a better knowledge and to new drugs development. Ongoing research, Positron Emission Mammography (PEM) and new tracers, are likely to bring improvements in patient care [Kelloff GJ, Hoffman JM, Johnson B, et al. Progress and promise of FDG-PET Imaging for cancer patient management and oncologic drug development. Clin Cancer Res 2005;1(April (8)): 2005].

A comparison of three different types of collectors for process heat uses; Vergleich von drei verschiedenen Kollektortypen fuer Prozesswaermeanwendungen

Energy Technology Data Exchange (ETDEWEB)

Brunold, S. [Solarenergie Pruef- und Forschungsstelle SPF-ITR, Rapperswil (Switzerland); Frey, R. [Solarenergie Pruef- und Forschungsstelle SPF-ITR, Rapperswil (Switzerland); Frei, U. [Solarenergie Pruef- und Forschungsstelle SPF-ITR, Rapperswil (Switzerland)

1995-12-31

A comparison of the measured and simulated values of three collector types shows that evacuated tube collectors are superior to transparent-insulation flat collectors in the case of high-temperature uses. At temperatures of 150 C and above good results were obtained using evacuated tube collectors with compound parabolic concentrators manufactured by Microtherm. CORTEC collectors are suited for temperatures in the range of 100 C to 150 C provided that the surface ratio is irrelevant. Costs play a decisive role when selecting systems. The results obtained show that improved transparent-insulation flat collectors can compete with evacuated tube collectors in the 100 C to 150 C temperature range. (orig.) [Deutsch] Ein Vergleich der gemessenen und simulierten Werte der drei Kollektoren zeigt, dass die Vakuumroehrenkollektoren fuer den Einsatz in Hochtemperaturanwendungen dem mit transparenter Waermedaemmung isolierten Flachkollektor ueberlegen sind. Der Vakuumroehrenkollektor mit CPC von Microtherm erzielt gute Resultate ab 150 C und mehr. Wogegen der CORTEC-Kollektor fuer den Einsatz im Temperaturbereich zwischen 100 C und 150 C geeignet ist, solange das Flaechenverhaeltnis keine Rolle spielt. Wie fuer die meisten Anwendungen spielen die Kosten eine entscheidende Rolle fuer die Wahl des eingesetzten Systems. Die Resultate zeigen, dass ein verbesserter mit TWD ausgeruesteter Flachkollektor im Temperaturbereich von 100 C bis 150 C konkurrenzfaehig zu Vakuumroehrenkollektoren sein kann. (orig.)

Optimized detection and characterization of liver metastases. The role of current MRI contrast agents; Optimierte Detektion und Charakterisierung von Lebermetastasen. Leistungsvermoegen aktueller MRT-Kontrastmittel

Energy Technology Data Exchange (ETDEWEB)

Weinrich, J.M.; Well, L.; Bannas, P. [Universitaetsklinikum Hamburg-Eppendorf, Zentrum fuer Radiologie und Endoskopie, Klinik und Poliklinik fuer diagnostische und interventionelle Radiologie und Nuklearmedizin, Hamburg (Germany)

2017-05-15

Metastases are the most common malignant lesions of the liver. The presence of liver metastases is an important prognostic factor and is decisive for the further management, especially in patients with colorectal cancer. Detection and characterization of liver metastases as well as differentiation from benign lesions are of high importance and a daily challenge in clinical radiology. Contrast-enhanced magnetic resonance imaging (MRI) has the highest sensitivity in detecting liver metastases. The sensitivity of MRI has been further increased due to the development of liver-specific contrast agents. This article describes the role of extracellular and hepatobiliary contrast agents for the detection and characterization of liver metastases. Moreover, the current knowledge on safety, sequence optimization, transient severe dyspnea and the combination of hepatobiliary with intravascular contrast agents for liver imaging is discussed. (orig.) [German] Metastasen sind die haeufigsten malignen Leberlaesionen. Das Vorhandensein von Lebermetastasen ist entscheidend fuer die Prognose und weitere Therapieplanung von Tumorpatienten, insbesondere von Patienten mit kolorektalen Karzinomen. Die Detektion von Lebermetastasen sowie deren Unterscheidung von anderen Leberlaesionen sind daher von hoechster Bedeutung und stellen eine alltaegliche Herausforderung fuer den Radiologen dar. Die Bildgebung mit der hoechsten Sensitivitaet fuer die Detektion von Lebermetastasen stellt die dynamische kontrastmittelgestuetzte Magnetresonanztomographie (MRT) dar. Die bereits hohe Sensitivitaet der MRT wird durch den Einsatz leberspezifischer Kontrastmittel noch weiter gesteigert. Dieser Artikel beleuchtet die Rolle der aktuellen unspezifischen und leberspezifischen MRT-Kontrastmittel fuer die Detektion und Charakterisierung von Lebermetastasen. Weiterhin werden Erkenntnisse zur Sicherheit, Sequenzoptimierung, zu transienten Atemartefakten und zur Kombination von MRT-Kontrastmitteln fuer die

Perus Bevölkerung: Das historische Gewordensein von Diskriminierungen und Privilegierungen

Directory of Open Access Journals (Sweden)

Martina Neuburger

2018-01-01

Full Text Available Die Bevölkerungs- und Sozialstruktur Perus zeigt eine große Vielfalt, die sich erst aus einer Darstellung des Gewordenseins gesellschaftlicher Strukturen und den Verwobenheiten von soziopolitischen Prozessen in unterschiedlichen räumlichen und zeitlichen Dimensionen erschließt. Die bereits in der inkaischen Gesellschaft angelegten Hierarchien wurden in der Kolonialzeit nicht gebrochen, sondern von der spanischen Krone reproduziert und mit eigenen Machtstrukturen überlagert. Die Systeme der Feudalgesellschaft mit Leibeigenschaft und Sklaverei wirken bis heute nach. Die hierarchischen Beziehungen zwischen den unterschiedlichen ethno-sozialen Gruppen sind bis heute durch die verschiedensten Formen von Diskriminierung und Rassismen wirkmächtig, wenn es um den Zugang zu Land und Einkommen, Bildung und gesellschaftliche Anerkennung geht. Anhand zweier Fallstudien arbeitet der Beitrag gesellschaftliche Strukturierungsdynamiken als Ergebnis ungleicher Machtstrukturen und postkolonialer Verhältnisse exemplarisch heraus. Das erste Beispiel fokussiert auf den Callejón de Huaylas im Department Ancash und setzt sich mit denjenigen Diskriminierungsmechanismen auseinander, unter denen insbesondere die ländlich-andine Bevölkerung leidet. Das zweite Beispiel konzentriert sich auf die ehemalige deutsch-tirolische Siedlung Pozuzo im Department Pasco, in dem die europä-isch-stämmige Bevölkerung als privilegierte Bevölkerungsgruppe ihre migrantische Identität machtvoll rekonstruiert und damit andere Zuschreibungen oder Hybriditäten negiert. In beiden Fallstudien spielen ethnische Zuschreibungen als Differenzkategorie und Legitimierungsstrategie eine wichtige Rolle für die Herausbildung der aufgezeigten Ungleichheiten.

Active barrier films of PET for solar cell application: Processing and characterization

International Nuclear Information System (INIS)

Rossi, Gabriella; Scarfato, Paola; Incarnato, Loredana

2014-01-01

A preliminary investigation was carried out on the possibility to improve the protective action offered by the standard multilayer structures used to encapsulate photovoltaic devices. With this aim, a commercial active barrier PET-based material, able to absorb oxygen when activated by liquid water, was used to produce flexible and transparent active barrier films, by means of a lab-scale film production plant. The obtained film, tested in terms of thermal, optical and oxygen absorption properties, shows a slow oxygen absorption kinetics, an acceptable transparency and an easy roll-to-roll processability, so proving itself as a good candidate for the development of protective coating for solar cells against the atmospheric degradation agents like the rain

Investigations on the effects of ``Ecstasy`` on cerebral glucose metabolism: an 18-FDG PET study; Untersuchungen zum Einfluss von ``Ecstasy`` auf den zerebralen Glukosemetabolismus: eine 18-FDG-PET-Studie

Energy Technology Data Exchange (ETDEWEB)

Schreckenberger, M.; Sabri, O.; Arning, C.; Tuttass, T.; Schulz, G.; Kaiser, H.J.; Wagenknecht, G.; Buell, U. [Klinik fuer Nuklearmedizin, Universitaetsklinik, RWTH Aachen (Germany); Gouzoulis-Mayfrank, E.; Sass, H. [Klinik fuer Psychiatrie, Universitaetsklinikum, RWTH Aachen (Germany)

1998-12-31

Doppelblindstudie wurden 16 gesunde Probanden ohne Drogenanamnese mittels 18-FDG-PET 110-120 min nach oraler Verabreichung von 2 mg/kg KG MDE (n=8) oder Placebo (n=8) untersucht. Zwei Minuten vor Injektion des Radiopharmazeutikums startend erfolgte ueber insgesamt 32 min eine konstante kognitive Stimulation ueber ein Wortrepetitionsparadigma, um konstante und vergleichbare mentale Bedingungen waehrend der zerebralen 18-FDG-Aufnahme zu gewaehrleisten. Die Darstellung der Individualanatomie erfolgte anhand T1-gewichteter 3D-flash MRT mit anschliessender manueller Regionalisierung in 108 Regions-of-Interest und PET/MRT Overlay. Absolute Quantifizierung der rMRGlu sowie Normierung auf den Globalmetabolismus mit anschliessendem Vergleich MDE versus Placebo mittels U-Test nach Mann und Whitney. Ergebnisse: Gegenueber der Placebo-Gruppe fand sich unter MDE keine signifikante Aenderung der globalen MRGlu (MDE: 41,8{+-}11,1 {mu}mol/min/100 g, Placebo: 50,1{+-}18,1 {mu}mol/min/100 g, p=0,298). Die normierten metabolischen Daten zeigten eine signifikante Minderung der rMRGlu im beidseitigen Frontalkortex: Links frontal posterior (-7,1%, p<0,05) und rechts praefrontal superior (-4,6%, p<0,05). Signifikante Steigerungen der rMRGlu fanden sich dagegen im beidseitigen Zerebellum (rechts: +10,1%, p<0,01; links: +7,6%, p<0,05) sowie im rechten Putamen (+6,2%, p<0,05). Schlussfolgerung: In der vorliegenden Studie konnten unter dem Akuteinfluss des `Ecstasy`-Analogons MDE neurometabolische Veraenderungen im Sinne einer fronto-striato-cerebellaeren Dysbalance nachgewiesen werden, die parallelen zu sowohl anderen psychotropen Substanzen als auch verschiedenen endogenen Psychosen aufweisen. (orig.)

Manufacturing Demonstration Facility: Roll-to-Roll Processing

Energy Technology Data Exchange (ETDEWEB)

Datskos, Panos G [ORNL; Joshi, Pooran C [ORNL; List III, Frederick Alyious [ORNL; Duty, Chad E [ORNL; Armstrong, Beth L [ORNL; Ivanov, Ilia N [ORNL; Jacobs, Christopher B [ORNL; Graham, David E [ORNL; Moon, Ji Won [ORNL

2015-08-01

This Manufacturing Demonstration Facility (MDF)e roll-to-roll processing effort described in this report provided an excellent opportunity to investigate a number of advanced manufacturing approaches to achieve a path for low cost devices and sensors. Critical to this effort is the ability to deposit thin films at low temperatures using nanomaterials derived from nanofermentation. The overarching goal of this project was to develop roll-to-roll manufacturing processes of thin film deposition on low-cost flexible substrates for electronics and sensor applications. This project utilized ORNL s unique Pulse Thermal Processing (PTP) technologies coupled with non-vacuum low temperature deposition techniques, ORNL s clean room facility, slot dye coating, drop casting, spin coating, screen printing and several other equipment including a Dimatix ink jet printer and a large-scale Kyocera ink jet printer. The roll-to-roll processing project had three main tasks: 1) develop and demonstrate zinc-Zn based opto-electronic sensors using low cost nanoparticulate structures manufactured in a related MDF Project using nanofermentation techniques, 2) evaluate the use of silver based conductive inks developed by project partner NovaCentrix for electronic device fabrication, and 3) demonstrate a suite of low cost printed sensors developed using non-vacuum deposition techniques which involved the integration of metal and semiconductor layers to establish a diverse sensor platform technology.

Internal nitridation of nickel-base alloys; Innere Nitrierung von Nickelbasis-Legierungen

Energy Technology Data Exchange (ETDEWEB)

Krupp, U.; Christ, H.J. [Siegen Univ. (Gesamthochschule) (Germany). Inst. fuer Werkstofftechnik

1998-12-31

The chromuim concentration is the crucial variable in nitridation processes in nickel-base alloys. Extensive nitridation experiments with various specimen alloys of the system Ni-Cr-Al-Ti have shown that the Cr itself starts to form nitrides as from elevated initial concentrations of about 10 to 20 weight%, (depending on temperature), but that lower concentrations have an earlier effect in that they induce a considerable increase in the N-solubility of the nickel-base alloys. This causes an accelerated nitridation attack on the alloying elements Ti and Al. Apart from experimental detection and analysis, the phenomenon of internal nitridation could be described as well by means of a mathematical model calculating the diffusion with the finite-differences method and determining the precipitation thermodynamics by way of integrated equilibrium calculations. (orig./CB) [Deutsch] Im Verlauf der Hochtemperaturkorrosion von Nickelbasis-Superlegierungen kann durch beanspruchungsbedingte Schaedigungen der Oxiddeckschicht ein Verlust der Schutzwirkung erfolgen und als Konsequenz Stickstoff aus der Atmosphaere in den Werkstoff eindringen. Der eindiffundierende Stickstoff bildet vor allem mit den Legierungselementen Al, Cr und Ti Nitridausscheidungen, die zu einer relativ rasch fortschreitenden Schaedigung fuehren koennen. Eine bedeutende Rolle bei diesen Nitrierungsprozessen in Nickelbasislegierungen spielt die Cr-Konzentration in der Legierung. So ergaben umfangreiche Nitrierungsexperimente an verschiedenen Modellegierungen des Systems Ni-Cr-Al-Ti, dass Cr zwar selbst erst ab Ausgangskonzentrationen von ca. 10-20 Gew.% (abhaengig von der Temperatur) Nitride bildet, allerdings bereits bei geringen Konzentrationen die N-Loeslichkeit von Nickelbasis-Legierungen entscheidend erhoeht. Dies hat zur Folge, dass es zu einem beschleunigten Nitrierungsangriff auf die Legierungselemente Ti und Al kommt. Neben den experimentellen Untersuchungen konnte das Phaenomen der inneren

Inflationary dynamics with a smooth slow-roll to constant-roll era transition

Energy Technology Data Exchange (ETDEWEB)

Odintsov, S.D. [ICREA, Passeig Luis Companys, 23, 08010 Barcelona (Spain); Oikonomou, V.K., E-mail: odintsov@ieec.uab.es, E-mail: v.k.oikonomou1979@gmail.com [Laboratory for Theoretical Cosmology, Tomsk State University of Control Systems and Radioelectronics (TUSUR), Lenin Avenue 40, 634050 Tomsk (Russian Federation)

2017-04-01

In this paper we investigate the implications of having a varying second slow-roll index on the canonical scalar field inflationary dynamics. We shall be interested in cases that the second slow-roll can take small values and correspondingly large values, for limiting cases of the function that quantifies the variation of the second slow-roll index. As we demonstrate, this can naturally introduce a smooth transition between slow-roll and constant-roll eras. We discuss the theoretical implications of the mechanism we introduce and we use various illustrative examples in order to better understand the new features that the varying second slow-roll index introduces. In the examples we will present, the second slow-roll index has exponential dependence on the scalar field, and in one of these cases, the slow-roll era corresponds to a type of α-attractor inflation. Finally, we briefly discuss how the combination of slow-roll and constant-roll may lead to non-Gaussianities in the primordial perturbations.

Doença de von Willebrand e anestesia Enfermedad de von Willebrand y anestesia Von Willebrand's disease and anesthesia

Directory of Open Access Journals (Sweden)

Fabiano Timbó Barbosa

2007-06-01

Full Text Available JUSTIFICATIVA E OBJETIVOS: A doença de von Willebrand ocorre devido à mutação no cromossomo 12 e é caracterizada por deficiência qualitativa ou quantitativa do fator de von Willebrand. A diversidade de mutações leva ao aparecimento das mais variadas manifestações clínicas possibilitando a divisão dos pacientes em vários tipos e subtipos clínicos. A coagulopatia se manifesta basicamente através da disfunção plaquetária associada à diminuição dos níveis séricos do fator VIII coagulante. O objetivo dessa revisão foi mostrar os cuidados relacionados aos pacientes portadores da doença de von Willebrand durante o período perioperatório. CONTEÚDO: Foram definidas as características da doença de von Willebrand quanto à fisiopatologia, à classificação, ao diagnóstico laboratorial, ao tratamento atual e aos cuidados com o manuseio do paciente no período perioperatório. CONCLUSÕES: A doença de von Willebrand é o distúrbio hemorrágico hereditário mais comum, porém ela é subdiagnosticada pela complexidade da própria doença. A correta classificação do paciente, o uso apropriado da desmopressina e a transfusão do fator de von Willebrand são medidas fundamentais para a realização do procedimento anestésico bem-sucedido.JUSTIFICATIVA Y OBJETIVOS: La enfermedad de von Willebrand ocurre debido a la mutación en el cromosoma 12 y se caracteriza por la deficiencia cualitativa o cuantitativa del factor de von Willebrand. La diversidad de mutaciones conlleva al aparecimiento de las más variadas manifestaciones clínicas posibilitando la división de los pacientes en varios tipos y subtipos clínicos. La coagulopatía se manifiesta básicamente a través de la disfunción plaquetaria asociada con la disminución de los niveles séricos del factor VIII coagulante. El objetivo de esa revisión fue mostrar los cuidados relacionados con las pacientes portadoras de la enfermedad de von Willebrand durante el per

Christina von Braun, Dorothea Dornhof, Eva Johach (Hg.: Das Unbewusste. Krisis und Kapital der Wissenschaften. Studien zum Verhältnis von Wissen und Geschlecht. Bielefeld: transcript Verlag 2009.

Directory of Open Access Journals (Sweden)

Zara Simone Pfeiffer

2010-07-01

Full Text Available Wissenschaft, die den Anspruch hat selbstreflexiv zu sein, sollte ihre unbewussten Anteile nicht ausblenden – das wird in den Beiträgen des von Christina von Braun, Dorothea Dornhof und Eva Johach herausgegebenen Sammelbandes auf überzeugende Weise gezeigt. Dabei geht es nicht primär um das Unbewusste als Objekt der Wissenschaften, sondern vielmehr um die Rolle des Unbewussten als Subjekt der Wissensordnung und Wissensproduktion, als „Krisis und Kapital“ der Wissenschaften, gleichermaßen als Sand und Öl imWissensgetriebe. Anstelle eines systematischen Überblicks liefert der interdisziplinär angelegte Band eine Vielzahl kluger, manchmal überraschender und durchgehend lesenswerter Perspektiven auf das visuelle und politische Unbewusste, seine Wissensgeschichte und seinen Ort in der Wissensordnung.Science, which purports to be self-reflexive, should not ignore its unconscious element – this is convincingly proven in the collected volume edited by Christina von Braun, Dorothea Dornhof, and Eva Johach. The focus is not merely on the unconscious as an object of the sciences, but on the role of the unconscious as a subject of knowledge organization and knowledge production, as “crisis and capital” of the sciences, indeed simultaneously functioning as sand and oil in the transmission of knowledge. In place of a systematic overview, the interdisciplinary volume offers a number of clever, sometimes surprising, and always well-worth reading perspectives on the visual and political unconscious, its history of knowledge, and its place in the order of knowledge.

FDG-PET-based radiotherapy planning in lung cancer. Optimum breathing protocol and patient positioning - an intraindividual comparison; FDG-PET-basierte Bestrahlungsplanung von nicht kleinzelligen Bronchialkarzinomen. Optimales Atemprotokoll und Patientenpositionierung - ein intraindividueller Vergleich

Energy Technology Data Exchange (ETDEWEB)

Grgic, A.; Schaefer-Schuler, A.; Kirsch, C.M.; Hellwig, D. [Universitaetsklinikum des Saarlandes, Homburg/Saar (Germany). Klinik fuer Nuklearmedizin; Nestle, U. [Universitaetsklinikum Freiburg (Germany). Klinik fuer Strahlenheilkunde; Kremp, S. [Universitaetsklinikum des Saarlandes, Homburg/Saar (Germany). Klinik fuer Strahlentherapie und Radioonkologie

2008-12-15

FDG-PET and PET / CT is increasingly used for radiotherapy (RT) planning in non-small-cell lung carcinoma (NSCLC). The planning process is often based on separately-acquired FDG-PET / CT and planning CT. We compared intraindividual differences between PET acquired in diagnostic and radiotherapy treatment position coregistered with planning CTs acquired using different breathing protocols. Sixteen patients with NSCLC underwent two PET acquisitions (diagnostic position-D-PET, radiotherapy position-RT-PET) and three planning-CT acquisitions (expiration-EXP, inspiration-INS, mid-breathhold-MID) on the same day. All scans were rigidly coregistered resulting in six fused datasets: D-INS, D-EXP, D-MID, RT-INS, RT-EXP and RT-MID. Fusion accuracy was assessed by three readers at eight anatomical landmarks: lung apices, aortic arch, heart, spine, sternum, carina, diaphragm and tumor using an alignment score ranging from 1 (no alignment) to 5 (exact alignment). RT-PET showed better alignment with any CT than D-PET (p < 0.001). With regard to breathing, RT-MID showed the best mean alignment score (3.7 {+-} 1.0) followed by RT-EXP (3.5 {+-} 0.9) and RT-INS (3.0 {+-} 0.8), all differences being significant (p < 0.001). Comparing the alignment scores with regard to anatomical landmarks, the largest deviations were found at diaphragm, heart and apices. Overall, there was a fair agreement (? = 0.48; p < 0.001) among the three readers. Significantly better fusion of PET and planning-CT can be reached with PET acquired in RT-position. The best intraindividual fusion results are obtained with the planning-CT performed during mid-breathhold. Our data justify the acquisition of a separate planning-PET in RT-treatment position if only a diagnostic PET-scan is available. (orig.)

Computer-aided roll pass design in rolling of airfoil shapes

Science.gov (United States)

Akgerman, N.; Lahoti, G. D.; Altan, T.

1980-01-01

This paper describes two computer-aided design (CAD) programs developed for modeling the shape rolling process for airfoil sections. The first program, SHPROL, uses a modular upper-bound method of analysis and predicts the lateral spread, elongation, and roll torque. The second program, ROLPAS, predicts the stresses, roll separating force, the roll torque and the details of metal flow by simulating the rolling process, using the slab method of analysis. ROLPAS is an interactive program; it offers graphic display capabilities and allows the user to interact with the computer via a keyboard, CRT, and a light pen. The accuracy of the computerized models was evaluated by (a) rolling a selected airfoil shape at room temperature from 1018 steel and isothermally at high temperature from Ti-6Al-4V, and (b) comparing the experimental results with computer predictions. The comparisons indicated that the CAD systems, described here, are useful for practical engineering purposes and can be utilized in roll pass design and analysis for airfoil and similar shapes.

Screening und Quantifizierung organischer Spurenstoffe mittels UPLC-HRMS:Entwicklung von Methoden und Anwendung zur Unterscheidung historischer und aktueller Spurenstoffe in einem ehemaligen Rieselfeld

OpenAIRE

Wode, Florian

2014-01-01

Aufgrund zunehmender Wasserknappheit gewinnt die Nutzung von gereinigtem Abwasser (Klarwasser), bezeichnet als Water Reuse, weltweit an Bedeutung. Neben herkömmlichen chemischen und mikrobiologischen Parametern spielen organische Spurenstoffe zunehmend eine Rolle bei der Beurteilung der Wasserqualität, die über mögliche Nutzungsformen entscheidet. In dieser Arbeit wurde die Spurenstoffbelastung in Grund- und Oberflächenwasser eines ehemaligen Rieselfeldgebietes untersucht, in dem seit 2005 Kl...

Quality management and reduction of processing time through automised preforming in the rotorblade manufacturing for wind turbines; Teilautomatisiertes preforming zur Qualitaetssicherung und Verkuerzung von Fertigungszeiten bei der Herstellung von Rotorblaettern von Windenergieanlagen

Energy Technology Data Exchange (ETDEWEB)

Doersch, C.; Ohlendorf, J.H.; Gebauer, I.; Mueller, D.H. [Bremer Institut fuer Konstruktionstechnik, Universitaet Bremen (Germany); Weigel, L. [Abeking Rasmussen Rotec GmbH and Co. KG, Lemwerder (Germany)

2007-11-15

Verkuerzung der Fertigungszeit sowie der zunehmende Qualitaetsanspruch an die Rotorblaetter eine immer staerkere Rolle einnehmen. Um diese Ansprueche erfuellen zu koennen, beschaeftigen sich das Bremer Institut fuer Konstruktionstechnik und das Unternehmen Abeking and Rasmussen Rotec GmbH and Co KG unter anderem mit der Handhabung und Erstellung von sogenannten Preforms, dies sind trockene, textile Halbzeuglagen, die als vorgeformter Lagenstapel in den Fertigungsprozess des Rotorblattes eingebracht werden. Mit Hilfe der Technologie des Preformings ist es moeglich, Bereiche der Fertigung zu parallelisieren. Dies ist ein grosser Vorteil bei der Produktion, da aufgrund der notwendigen Temperzeiten, alle anderen Fertigungsschritte moeglichst zeitoptimiert gestaltet werden muessen, um kurze Zykluszeiten zu realisieren. Betrachtet werden soll die Handhabung von textilen Halbzeugen, insbesondere das preforming und dessen Auswirkungen auf die Wirtschaftlichkeit der Faserverbundfertigung. Ebenfalls sollen die Aspekte der Qualitaetssicherung in Verbindung mit dem preforming aufgezeigt werden und moegliche Ansaetze zu einer Teilautomatisierung gegeben werden. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

Sondierungen im Spannungsfeld von Medienaktivismus und handlungsorientierter Medienpädagogik

Directory of Open Access Journals (Sweden)

Theo Hug

2011-06-01

Full Text Available In historisch variierenden Medienkonstellationen wurden unterschiedliche Formen des Medienaktivismus, der (Medien-Bildung und des mediengestützten Lernens entwickelt. Einerseits lassen sich unterschiedliche Formen des Medienaktivismus rekonstruieren, angefangen von Graffiti, politischen Aktivitäten von Radiobastlern und der Community-TV-Bewegung über visuellen Aktivismus und "taktische Medien" (Garcia & Lovink 1997 bis hin zu Medieninterventionen im Lichte aktueller biopolitischer Entwicklungen (vgl. Da Costa & Philip 2008. Andererseits ist die Ausdifferenzierung medienpädagogischer Diskurse und Debatten über Medienkompetenz, Medienbildung und Medienliteralität unübersehbar geworden. Sowohl in medienaktivistischen als auch medienpädagogischen Diskurszusammenhängen spielen verschiedene Konzepte der Handlungsorientierung sowie der Medien- und Gesellschaftskritik eine Rolle. Allerdings ist bislang kaum ein Austausch beider Diskurstraditionen auszumachen. Der Beitrag zielt auf die Sondierung von Herausforderungen für die Medienpädagogik und relevanten Anknüpfungspunkten und Schnittstellen der Thematik. In historically, culturally, and technically variable media constellations various forms of media activism, media education and learning design have been developed. As to media activism, there is broad spectrum including graffiti, radio activism, community media, visual activism, tactical media (Garcia & Lovink 1997, and more recently, media interventions questioning the workings of biopower (Da Costa & Philip 2008. On the other hand, debates on media competency and media literacy have been going on for a few decades. Although media have also been conceptualized as media of resistance or critique in informal contexts as well as in formal education, lively exchanges of concepts and ideas are comparatively seldom in respective traditions. The paper aims at exploring challenges for media education and interfaces between both fields.

Gemeinsam hilfreich oder einsam lästig? Beurteilung von praktikumsbegleitenden Weblogs von angehenden Lehrpersonen

Directory of Open Access Journals (Sweden)

Nives Egger

2017-02-01

Full Text Available Weblogs werden an Hochschulen vermehrt zur Unterstützung von Lern- und Reflexionsprozessen eingesetzt, in der Lehrer/innenbildung auch zunehmend während der berufspraktischen Ausbildung. Die Studierenden beurteilen den Einsatz von Weblogs jedoch unterschiedlich. Dabei ist wenig bekannt, welchen Einfluss die Vergabe und das Erhalten von Peerfeedback auf den Beurteilungsprozess von praktikumsbegleitenden Weblogs sowie auf den Umfang von Blogpostings haben. Im folgenden Beitrag wird dieser Frage mittels einer Befragung von 74 angehenden Lehrpersonen nachgegangen, die praktikumsbegleitende Weblogs mit oder ohne Peerfeedback nutzten, um über herausfordernde Ereignisse im Praktikum zu reflektieren. Die Ergebnisse zeigen, dass Studierende, die Peerfeedback erhielten und andere Blogbeiträge kommentierten, den Weblogeinsatz nützlicher einschätzen sowie eine höhere Motivation und positivere Einstellung gegenüber den Einsatz von Weblogs aufweisen als Studierende, die ohne Peerfeedback bloggen. Keinen Einfluss hat Peerfeedback auf den Umfang der Blogbeiträge und auf die dafür aufgewendete Zeit.

Inflation with a smooth constant-roll to constant-roll era transition

Science.gov (United States)

Odintsov, S. D.; Oikonomou, V. K.

2017-07-01

In this paper, we study canonical scalar field models, with a varying second slow-roll parameter, that allow transitions between constant-roll eras. In the models with two constant-roll eras, it is possible to avoid fine-tunings in the initial conditions of the scalar field. We mainly focus on the stability of the resulting solutions, and we also investigate if these solutions are attractors of the cosmological system. We shall calculate the resulting scalar potential and, by using a numerical approach, we examine the stability and attractor properties of the solutions. As we show, the first constant-roll era is dynamically unstable towards linear perturbations, and the cosmological system is driven by the attractor solution to the final constant-roll era. As we demonstrate, it is possible to have a nearly scale-invariant power spectrum of primordial curvature perturbations in some cases; however, this is strongly model dependent and depends on the rate of the final constant-roll era. Finally, we present, in brief, the essential features of a model that allows oscillations between constant-roll eras.

Hypoxia imaging with [18F]-FMISO-PET for guided dose escalation with intensity-modulated radiotherapy in head-and-neck cancers

Energy Technology Data Exchange (ETDEWEB)

Henriques de Figueiredo, B. [Institut Bergonie, Department of Radiotherapy, Bordeaux (France); INCIA UMR-CNRS 5287, Bordeaux (France); Zacharatou, C. [Institut Bergonie, Department of Radiotherapy, Bordeaux (France); Galland-Girodet, S.; Benech, J. [Hospital Haut-Leveque, Department of Radiotherapy, CHRU Bordeaux (France); Clermont-Gallerande, H. de [Hospital Pellegrin, Department of Nuclear Medicine, CHRU Bordeaux (France); Lamare, F. [INCIA UMR-CNRS 5287, Bordeaux (France); Hospital Haut-Leveque, Department of Radiotherapy, CHRU Bordeaux (France); Hatt, M. [LaTIM INSERM U1101, Brest (France); Digue, L. [Hospital Saint-Andre, Department of Clinical Oncology, CHRU Bordeaux (France); Mones del Pujol, E. de [Department of Oto-rhino-laryngology, CHRU Bordeaux (France); Fernandez, P. [INCIA UMR-CNRS 5287, Bordeaux (France); Hospital Pellegrin, Department of Nuclear Medicine, CHRU Bordeaux (France); University Bordeaux 2, Bordeaux (France)

2014-09-23

Positron emission tomography (PET) with [{sup 18}F]-fluoromisonidazole ([{sup 18}F]-FMISO) provides a non-invasive assessment of hypoxia. The aim of this study is to assess the feasibility of a dose escalation with volumetric modulated arc therapy (VMAT) guided by [{sup 18}F]-FMISO-PET for head-and-neck cancers (HNC). Ten patients with inoperable stages III-IV HNC underwent [{sup 18}F]-FMISO-PET before radiotherapy. Hypoxic target volumes (HTV) were segmented automatically by using the fuzzy locally adaptive Bayesian method. Retrospectively, two VMAT plans were generated delivering 70 Gy to the gross tumour volume (GTV) defined on computed tomography simulation or 79.8 Gy to the HTV. A dosimetric comparison was performed, based on calculations of tumour control probability (TCP), normal tissue complication probability (NTCP) for the parotid glands and uncomplicated tumour control probability (UTCP). The mean hypoxic fraction, defined as the ratio between the HTV and the GTV, was 0.18. The mean average dose for both parotids was 22.7 Gy and 25.5 Gy without and with dose escalation respectively. FMISO-guided dose escalation led to a mean increase of TCP, NTCP for both parotids and UTCP by 18.1, 4.6 and 8 % respectively. A dose escalation up to 79.8 Gy guided by [{sup 18}F]-FMISO-PET with VMAT seems feasible with improvement of TCP and without excessive increase of NTCP for parotids. (orig.) [German] Die Positronenemissionstomographie (PET) mit [{sup 18}F]-Fluoromisonidazol ([{sup 18}F]-FMISO) ermoeglicht eine nichtinvasive Beurteilung der Hypoxie. Ziel dieser Studie ist es, die Durchfuehrbarkeit einer [{sup 18}F]-FMISO-PET-gefuehrten Dosissteigerung bei volumetrisch modulierter Arc-Therapie (VMAT) von Kopf-Hals-Tumoren (KHT) zu bewerten. Zehn Patienten mit inoperablen KHT der Stadien III-IV erhielten vor der Strahlentherapie eine [{sup 18}F]-FMISO-PET. Hypoxische Zielvolumina (HV) wurden automatisch mit Hilfe des FLAB(Fuzzy Locally Adaptive Bayesian

Entwicklung und Anwendung von Methoden zur Bestimmung von Selen-Spezies in human-biologischem Material

OpenAIRE

Jäger, Thomas

2014-01-01

Selen ist essentieller Bestandteil von mehr als 25 physiologisch wichtigen menschlichen Enzymen. Der tägliche Bedarf wird überwiegend in Form von organischen Selenverbindungen wie Selenmethionin oder Selenocystein aus der Nahrung aufgenommen. Weitere Expositionswege sind die Einnahme von Nahrungsergänzungsmitteln zur Selensupplementation sowie die inhalative oder dermale Aufnahme von in erster Linie anorganischen Selenverbindungen oder elementarem Selen an Arbeitsplätzen der Selen-verarbeiten...

Aggregation und Management von Metadaten im Kontext von Europeana

Directory of Open Access Journals (Sweden)

Gerda Koch

2017-09-01

Full Text Available Mit dem In-Beziehung-Setzen und Verlinken von Daten im Internet wird der Weg zur Umsetzung des semantischen Webs geebnet. Erst die semantische Verbindung von heterogenen Datenbeständen ermöglicht übergreifende Suchvorgänge und späteres „Machine Learning“. Im Artikel werden die Aktivitäten der Europäischen Digitalen Bibliothek im Bereich des Metadatenmanagements und der semantischen Verlinkung von Daten skizziert. Dabei wird einerseits ein kurzer Überblick zu aktuellen Forschungsschwerpunkten und Umsetzungsstrategien gegeben, und darüber hinaus werden einzelne Projekte und maßgeschneiderte Serviceangebote für naturhistorische Daten, regionale Kultureinrichtungen und Audiosammlungen beschrieben.

Von der Medienwirkungsbehauptung zur erziehungswissenschaftlichen Medienrezeptionsforschung. Vorschlag zur Analyse von Filmkommunikaten

Directory of Open Access Journals (Sweden)

Barbara Drinck

2001-04-01

Full Text Available Im Hinblick auf die Erforschung spezifischer Zusammenhänge von Medienkonsum und der Herausbildung von Einstellungen und Handlungen wird eine konstruktivistische Theorieorientierung plausibilisiert, indem zunächst auf den Stand der Medienwirkungsforschung eingegangen und vor dem Hintergrund einer begründeten Kritik des Wirkungsverständnisses auf die Notwendigkeit einer medienrezeptionswissenschaftlichen Forschungsalternative hingewiesen wird. Weiterhin wird der Stand der (erziehungswissenschaftlichen Medienrezeptionsforschung erörtert. Sodann werden Elemente einer konstruktivistischen Methodologie von Medienrezeptionsforschung beschrieben, die am Beispiel der Rezeption von Filmen konkretisiert werden. Dabei wird das Konzept des Kommunikates (S.J. Schmidt als Ausgangspunkt genommen, ein Vorschlag für eine Beschreibungssprache für (Film- Kommunikate entwickelt und eine Adaption des Ansatzes filmischer Narration zur Sprache gebracht.

Upscaling of polymer solar cell fabrication using full roll-to-roll processing

DEFF Research Database (Denmark)

Krebs, Frederik C; Tromholt, Thomas; Jørgensen, Mikkel

2010-01-01

factors (excluding bus bars) of 50, 67 and 75% respectively. In addition modules with lengths of 6, 10, 20, 22.5 and 25 cm were explored. The devices were prepared by full roll-to-roll solution processing in a web width of 305 mm and roll lengths of up to 200 m. The devices were encapsulated...... with a barrier material in a full roll-to-roll process using standard adhesives giving the devices excellent stability during storage and operation. The total area of processed polymer solar cell was around 60 m2 per run. The solar cells were characterised using a roll-to-roll system comprising a solar simulator...... to the cost for electricity using existing technologies the levelized cost of electricity (LCOE) is expected to be significantly higher than the existing technologies due to the inferior operational lifetime. The presented devices are thus competitive for consumer electronics but ill-suited for on...

Limited value of fluorine-18-fluorodeoxyglucose PET for the differential diagnosis of focal liver lesions in patients with chronic hepatitis C virus infection

Energy Technology Data Exchange (ETDEWEB)

Schroeder, O. [Frankfurt Univ. (Germany). Dept. of Nuclear Medicine]|[Frankfurt Univ. (Germany). 2. Dept. of Internal Medicine; Trojan, J.; Zeuzem, S. [Frankfurt Univ. (Germany). 2. Dept. of Internal Medicine; Baum, R.P. [Frankfurt Univ. (Germany). Dept. of Nuclear Medicine

1998-12-31

ueber einen moeglichen diagnostischen Zugewinn durch die Bestimmung des Glukosestoffwechsels mittels FDG-PET in der Evaluation fokaler Leberlaesionen bei Patienten mit chronischer Hepatitis C liegen nicht vor. Methoden: An 10 Patienten wurden nach Injektion von 370 MBq FDG-Ganzkoerper-PET sowie transmissionskorrigierte Regionalaufnahmen der Leber und SUV-Bestimmungen 60 Minuten nach i.v. Applikation von FDG durchgefuehrt. Parallel dazu erfolgten abdomineller Ultraschall, CT, Serum-anti-p53-Bestimmung sowie die histologische und p53-Antigen-immunhistochemische Aufarbeitung der fokalen Leberherde. Ergebnisse: Die histologische Untersuchung der sonographisch nachgewiesenen Leberherde ergab 5 HCC, 2 Lebermetastasen sowie 3 zirrhotische Regeneratknoten. Mit der FDG-PET konnten sowohl ein hepatisch metatasiertes Adeno-Ca des Rektums als auch 2/5 HCC detektiert werden. Alle benignen Leberlaesionen, jedoch auch 3 HCC und das hepatisch metastasierte Karzinoid waren dagegen nicht nachweisbar. Mit Ultraschall oder CT gelang der Nachweis saemtlicher intrahepatischer Prozesse. Beide Tumoren mit einer sehr starken Expression von p53 wiesen einen stark erhoehten Glukosemetabolismus auf. Schlussfolgerung: FDG-PET ist morphologischen bildgebenden Verfahren in der Detektion und der nichtinvasiven Differenzierung fokaler Leberlaesionen bei Patienten mit HCV unterlegen. Die nachgewiesene Beziehung zwischen der p53-Expression und dem SUV bedarf weiterer Untersuchungen. (orig.)

Neues über das Tertiär von Java und die mesozoischen Schichten von West-Borneo

NARCIS (Netherlands)

Martin, K.

1888-01-01

Die Monographie, welche unter dem Titel Die Fossilien von Java herausgegeben wird ¹), ist so weit fortgeschritten, dass sich aus den in ihr beschriebenen Gastropoden bereits eine Anzahl von Schlussfolgerungen ableiten lässt, welche für die in Bearbeitung begriffene, geologische Karte von Java von

Measurements of emission rates of hydrocarbons from sunflower as a function of temperature, light intensity and stress (ozone levels); Bestimmung von Emissionsraten pflanzlicher Kohlenwasserstoffe bei Sonnenblumen in Abhaengigkeit von Temperatur, Lichtintensitaet und Stress, insbesondere von der Belastung mit Ozon

Energy Technology Data Exchange (ETDEWEB)

Schuh, G.; Wildt, J.; Kley, D.

1996-08-01

Monoterpene, Sesquiterpene und zwei unbekannte oxygenierte Substanzen auf. In Abhaengigkeit von der Temperatur zeigten alle Emissionsraten einen exponentiellen Anstieg mit zunehmender Temperatur. Erstmals konnte eine Zunahme der Temperaturabhaengigkeit der Emissionsrate bei hoeherer Lichtintensitaet beobachtet werden. Bei Sonnenblumen wurde eindeutig die Lichtabhaengigkeit der Monoterpen- und BOVOC-, sowie der Sesquiterpen-Emissionrate gezeigt. Fuer alle Substanzen wurde waehrend stressfreier Perioden eine positive Korrelation der Emissionsraten mit der Transpirationsrate beobachtet. Allerdings wurde widerlegt, dass die Transpirationsrate der dominierende Faktor fuer die Emission ist. Erstmals wurde eine positive Korrelation der Emissionsraten der Mono- und Sesquiterpene mit der Nettophotosyntheserate beobachtet. Der Einfluss von mechanischem Stress, Verletzungsstress, Nahrungsmangel und der Belastung der Pflanzen mit Ozon machte sich in einer extremen Erhoehung der VOC-Emissionsraten um einen Faktor von 10-300 bemerkbar. Fuer die Stresssituationen Verletzung, mechanische Beanspruchung und Ozonbelastung wurden jeweils substanzspezifische Aenderungen der Emissionsrate beobachtet, die aber unabhaengig von der Stressart waren. Die Auswirkung von Ozon auf die Emissionsraten der Kohlenwasserstoffe konnte dabei erst nach einer Verzoegerungszeit von 3-4 Stunden festgestellt werden. Ozonstress hatte bei den Sonnenblumen jeweils nur am 1. Expositionstag eine Erhoehung der Emissionsraten um das 5-100-fache zur Folge, eine Wiederholung der VOC-Emissionserhoehung als Folge von Ozonstress wurde nicht beobachtet. Da eine zweite Ozonexposition keinen Einfluss auf die Emissionsrate hat, muss Ozonstress eine untergeordnete Rolle der Auswirkung auf die Atmosphaere zugeordnet werden. (orig./MG)

Analytik von Minorlipiden: Ferulasäureester von Phytosterolen (gamma-Oryzanol) in Reis

OpenAIRE

Miller, Andreas

2005-01-01

Ferulasäureestern von Phytosterolen (γ-Oryzanol) werden antioxidative und cholesterinsenkende Eigenschaften zugeschrieben. Bisher beschriebene Methoden zur Analytik von γ-Oryzanol in Reis erforderten eine aufwendige Aufreinigung des Probenextrakts. In dieser Arbeit wurde basierend auf der on-line LC-GC eine Methode entwickelt, die die simultane Bestimmung von γ-Oryzanol-Gehalt und Sterylferulat-Verteilung ohne Aufreinigung des Probenextrakts erlaubt. Mit Hilfe der Technik wurden die natürlich...

Plasmonic color metasurfaces fabricated by a high speed roll-to-roll method

DEFF Research Database (Denmark)

Murthy, Swathi; Pranov, Henrik; Feidenhans'l, Nikolaj Agentoft

2017-01-01

Lab-scale plasmonic color printing using nano-structured and subsequently metallized surfaces have been demonstrated to provide vivid colors. However, upscaling these structures for large area manufacturing is extremely challenging due to the requirement of nanometer precision of metal thickness....... In this study, we have investigated a plasmonic color meta-surface design that can be easily upscaled. We have demonstrated the feasibility of fabrication of these plasmonic color surfaces by a high-speed roll-to-roll method, comprising roll-to-roll extrusion coating at 10 m min-1 creating a polymer foil having...... 100 nm deep pits of varying sub-wavelength diameter and pitch length. Subsequently this polymer foil was metallized and coated also by high-speed roll-to-roll methods. The perceived colors have high tolerance towards the thickness of the metal layer, when this thickness exceeds the depths of the pits...

Fabrication of cold-rolled bands of the alloy-ehi 702 in rolls

International Nuclear Information System (INIS)

Zhuchin, V.N.; Gindin, A.Sh.; Shaburov, V.E.; Vladimirov, S.M.; Sokolov, V.A.; Shavkun, V.V.; Perepelitsa, I.V.; Markov, V.V.; Naymov, E.P.; Evstaf'ev, P.P.

1977-01-01

The questions are discussed, connected with the manufacture of cold-rolled strip of alloy EI702 in reels from strip blanks. It has been established that in the manufacture of hot-rolled stock from EI702 slabs it is necessary to use powerful rolling equipment because of high resistance to deformation. The reel method for manufacturing EI702 alloy improves the rolled stock and increases percentage of serviceable stock, as well as the output

Prozessentwicklung und Produktion von Wirkstoff-Metaboliten durch Ganzzellbiotransformation im Gramm-Maßstab mit humanem Cytochrom P450 exprimiert in E. coli

OpenAIRE

Jahn, Berengar

2008-01-01

Cytochrom P450 (CYP) umfasst eine ubiquitär verbreitete Enzymüberfamilie mit einem sehr breiten Substrat- und Reaktionsspektrum. Im menschlichen Körper spielt CYP im Stoffwechsel von Medikamenten eine zentrale Rolle. In der pharmazeutischen Forschung werden aufgereinigte Wirkstoff-Metaboliten für die Strukturaufklärung, als Vergleichsstandard für die Pharmakokinetik und für die Klärung toxikologischer Risiken im Rahmen der Arzneimittelzulassung benötigt. Bisherige chemische oder mikrobiologis...

Stress and accidental defect detection on rolling mill rolls

International Nuclear Information System (INIS)

Auzas, J.-D.

1999-01-01

During the rolling mill process, rolls are submitted to high pressures that can lead to local decohesion or metallurgical changes. Both these cracks or softened areas must be detected as soon as they appear because of the risk of spalling, marks on the product, and mill wreck. These defects can be detected using the eddy current method, and particularly sensors specially developed for micro-defects detection. These sensors must be adapted to the environment of a roll grinding machine on which they must be installed. Users' schedule of conditions also require them to be attached to a wide range of eddy current generator and automatic computerized interpretation. Mill requirements for new high tech roll grades and quality lead to continuous development and improvement of the tools that will provide immediate 'go - no go' information. This paper is an update of these developments. (author)

Spray rolling aluminum alloy strip

Energy Technology Data Exchange (ETDEWEB)

McHugh, Kevin M.; Delplanque, J.-P.; Johnson, S.B.; Lavernia, E.J.; Zhou, Y.; Lin, Y

2004-10-10

Spray rolling combines spray forming with twin-roll casting to process metal flat products. It consists of atomizing molten metal with a high velocity inert gas, cooling the resultant droplets in flight and directing the spray between mill rolls. In-flight convection heat transfer from atomized droplets teams with conductive cooling at the rolls to rapidly remove the alloy's latent heat. Hot deformation of the semi-solid material in the rolls results in fully consolidated, rapidly solidified product. While similar in some ways to twin-roll casting, spray rolling has the advantage of being able to process alloys with broad freezing ranges at high production rates. This paper describes the process and summarizes microstructure and tensile properties of spray-rolled 2124 and 7050 aluminum alloy strips. A Lagrangian/Eulerian poly-dispersed spray flight and deposition model is described that provides some insight into the development of the spray rolling process. This spray model follows droplets during flight toward the rolls, through impact and spreading, and includes oxide film formation and breakup when relevant.

Der Briefwechsel zwischen Alexander von Humboldt und Karl Ernst von Baer

Directory of Open Access Journals (Sweden)

Thomas Schmuck

2012-10-01

Full Text Available Zusammenfassung Der kurze, nicht vollständig erhaltene Briefwechsel zwischen Alexander von Humboldt und Karl Ernst von Baer behandelt sehr verschiedene Themen: Politik, Kriegsgefahr, den Wissenschaftsbetrieb, Auszeichnungen und Tagungen, Embryologie und Cholera. Gemeinsam mit Briefen und Reden ergibt sich dabei ein differenziertes Bild der Beurteilung der beiden Wissenschaftler durch den jeweils anderen. Während Baer sich als Bewunderer Humboldts erweist, erscheint umgekehrt Humboldts Einschätzung Baers als ambivalent. Abstract The short, not completely preserved correspondence between Alexander von Humboldt and Karl Ernst von Baer deals with a wide range of subjects: politics and the danger of war, academic activities, scientific awards and conferences, aspects of embryology and the cholera. Letters to third persons and speeches, together with the correspondence between Humboldt and Baer show a differentiated pattern of mutual appraisal: While Baer always remained an admirer of the elder naturalist, Humboldt’s estimation was characterized by ambivalence.

Replication of nanopits and nanopillars by roll-to-roll extrusion coating using a structured cooling roll

DEFF Research Database (Denmark)

Murthy, Swathi; Pranov, Henrik; Pedersen, Henrik Chresten

2016-01-01

This paper investigates a novel, very high throughput, roll-to-roll (R2R) process for nanostructuring of polymer foils, called R2R extrusion coating. It has the potential to accelerate the integration of nanostructured materials in consumer products for a variety of applications, including optical....../height of 100 nm. The best replication was achieved in polypropylene, by running at high roller line-speed of 60 m/min, and high cooling roller temperature of 70°C. Replication in other common polymers like polyethylene and polystyrene was not possible for the parameter range used for the investigation......., technical, and functional surfaces and devices. In roll-to-roll extrusion coating, a molten polymer film is extruded through a flat die forming a melt curtain, and then laminated onto a carrier foil. The lamination occurs as the melt curtain is pressed between a cooling roller and a counter roller...

Roll-to-Roll Nanoforming of Metals Using Laser-Induced Superplasticity.

Science.gov (United States)

Goswami, Debkalpa; Munera, Juan C; Pal, Aniket; Sadri, Behnam; Scarpetti, Caio Lui P G; Martinez, Ramses V

2018-05-24

This Letter describes a low-cost, scalable nanomanufacturing process that enables the continuous forming of thin metallic layers with nanoscale accuracy using roll-to-roll, laser-induced superplasticity (R2RLIS). R2RLIS uses a laser shock to induce the ultrahigh-strain-rate deformation of metallic films at room temperature into low-cost polymeric nanomolds, independently of the original grain size of the metal. This simple and inexpensive nanoforming method does not require access to cleanrooms and associated facilities, and can be easily implemented on conventional CO 2 lasers, enabling laser systems commonly used for rapid prototyping or industrial cutting and engraving to fabricate uniform and three-dimensional crystalline metallic nanostructures over large areas. Tuning the laser power during the R2RLIS process enables the control of the aspect ratio and the mechanical and optical properties of the fabricated nanostructures. This roll-to-roll technique successfully fabricates mechanically strengthened gold plasmonic nanostructures with aspect ratios as high as 5 that exhibit high oxidation resistance and strong optical field enhancements. The CO 2 laser used in R2RLIS can also integrate the fabricated nanostructures on transparent flexible substrates with robust interfacial contact. The ability to fabricate ultrasmooth metallic nanostructures using roll-to-roll manufacturing enables the large scale production, at a relatively low-cost, of flexible plasmonic devices toward emerging applications.

Imaging and PET - PET/CT imaging

International Nuclear Information System (INIS)

Von Schulthess, G.K.; Hany, Th.F.

2008-01-01

PET/CT has grown because the lack of anatomic landmarks in PET makes 'hardware-fusion' to anatomic cross-sectional data extremely useful. Addition of CT to PET improves specificity, but also sensitivity, and adding PET to CT adds sensitivity and specificity in tumor imaging. The synergistic advantage of adding CT is that the attenuation correction needed for PET data can also be derived from the CT data. This makes PET-CT 25-30% faster than PET alone, leading to higher patient throughput and a more comfortable examination for patients typically lasting 20 minutes or less. FDG-PET-CT appears to provide relevant information in the staging and therapy monitoring of many tumors, such as lung carcinoma, colorectal cancer, lymphoma, gynaecological cancers, melanoma and many others, with the notable exception of prostatic cancer. for this cancer, choline derivatives may possibly become useful radiopharmaceuticals. The published literature on the applications of FDG-PET-CT in oncology is still limited but several designed studies have demonstrated the benefits of PET-CT. (authors)

Evaluation of PET Scanner Performance in PET/MR and PET/CT Systems: NEMA Tests.

Science.gov (United States)

Demir, Mustafa; Toklu, Türkay; Abuqbeitah, Mohammad; Çetin, Hüseyin; Sezgin, H Sezer; Yeyin, Nami; Sönmezoğlu, Kerim

2018-02-01

The aim of the present study was to compare the performance of positron emission tomography (PET) component of PET/computed tomography (CT) with new emerging PET/magnetic resonance (MR) of the same vendor. According to National Electrical Manufacturers Association NU2-07, five separate experimental tests were performed to evaluate the performance of PET scanner of General Electric GE company; SIGNATM model PET/MR and GE Discovery 710 model PET/CT. The main investigated aspects were spatial resolution, sensitivity, scatter fraction, count rate performance, image quality, count loss and random events correction accuracy. The findings of this study demonstrated superior sensitivity (~ 4 folds) of PET scanner in PET/MR compared to PET/CT system. Image quality test exhibited higher contrast in PET/MR (~ 9%) compared with PET/CT. The scatter fraction of PET/MR was 43.4% at noise equivalent count rate (NECR) peak of 218 kcps and the corresponding activity concentration was 17.7 kBq/cc. Whereas the scatter fraction of PET/CT was found as 39.2% at NECR peak of 72 kcps and activity concentration of 24.3 kBq/cc. The percentage error of the random event correction accuracy was 3.4% and 3.1% in PET/MR and PET/CT, respectively. It was concluded that PET/MR system is about 4 times more sensitive than PET/CT, and the contrast of hot lesions in PET/MR was ~ 9% higher than PET/CT. These outcomes also emphasize the possibility to achieve excellent clinical PET images with low administered dose and/or a short acquisition time in PET/MR.

Rolling into spatial disorientation: Simulator demonstration of the post-roll (Gillingham) illusion

NARCIS (Netherlands)

Nooij, S.A.E.; Groen, E.L.

2011-01-01

Introduction: Spatial disorientation (SD) is still a contributing factor in many aviation accidents, stressing the need for adequate SD training scenarios. In this article we focused on the post-roll effect (the sensation of rolling back after a roll maneuver, such as an entry of a coordinated turn)

Evaluation von Bildungssoftware im Spannungsfeld von Objektivität und praktischer Anwendung

Directory of Open Access Journals (Sweden)

Cornelia Biffi

2002-05-01

Full Text Available Das Angebot an Bildungs- bzw. Lernsoftware umfasst eine breite Palette von sehr unterschiedlichen Produkten. Eigentliche Unterrichtssoftware, die speziell für den Unterricht hergestellt und auf Lehrmittel und Curriculum abgestimmt ist, gibt es kaum. Im Projekt «Lernsoftware Evaluation» des Pestalozzianums Zürich ermitteln Lehrpersonen die Qualität von Bildungssoftware, indem sie diese im Unterricht einsetzen und anhand eines Kriterienrasters beurteilen. Eine Analyse der in der Evaluation generierten Daten belegt die Problematik des Anspruchs einer objektiven Qualitätsbeurteilung. Es werden die Probleme bei der Anwendung von Kriterienraster und Beurteilungsmodus aufgezeigt und ermittelt, worin die subjektiven Qualitätsmassstäbe der Evaluierenden begründet sind. Diese Ausführungen sind Teil eines Forschungsprojekts für die Weiterentwicklung einer theoretisch fundierten, aber dennoch praxisnahen Evaluation von Bildungssoftware.

Research on the rolling moment in the symmetrical and asymmetrical rolling process

Science.gov (United States)

Alexa, V.; Raţiu, S. A.; Kiss, I.; Cioată, C. G.

2017-01-01

Research distribution the rolling moments symmetrical and asymmetrical report presents great importance both in theory and to introduce clarifications to the calculation of rolling resistance line assemblies. Clarifying individuals of metallic material deformation between the rolls single cylinder diameters act of any difference of work and analysis of advance and delay phenomena. Torque drive value for each of the rolling cylinders was done by reducing the thickness of the laminate samples, an experimental facility located in the laboratory of plastic deformation of the Faculty of Engineering Hunedoara. The analysis of research results show that in terms of power consumption for deformation and safety equipment in operation is rational for mills which require such a difference between the work rolls to execute about one cylinder operated.

MARCKO thermal insulation layers. Life predictions for thermal insulation and antioxidant layers. Final report; MARCKO-Waermedaemmschichten. Methoden zur Lebensdauervorhersage von Waermedaemm- und Oxidationsschutzschichten. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Schuetze, M.

2003-07-01

, Rolls-Royce und Siemens als Industriepartner und FZ-Juelich, DLR und DECHEMA als Institute beteiligt waren, wurden Arbeiten zur Entwicklung eines Lebensdauermodells fuer einkristalline, keramisch beschichtete Gasturbinenschaufeln durchgefuehrt. Dieses Modell soll zuverlaessige Voraussagen ueber die Zeitdauer der Haltbarkeit der Keramik und der Haftvermittlerschicht unter verschiedenen Betriebsbedingungen ermoeglichen. Die Aufgabe des Karl-Winnacker-Instituts der DECHEMA e.V. im Rahmen dieses Verbundprojektes bestand zunaechst in isothermen Oxidationsversuchen, die bei 950 C-1100 C an Laborluft durchgefuehrt wurden. Anschliessend wurde das Oxidationsverhalten anhand von metallographischen Schliffen charakterisiert. Dabei wurde besonderes Augenmerk auf die Entwicklung der TGO (Thermally Grown Oxide)-Schichtdicken, der oxidschichtseitigen Aluminiumverarmung im Bond Coat sowie der physikalischen Defekte in Form von Poren, Porenpopulationen und Mikrorissen innerhalb bzw. in unmittelbarer Naehe der TGO gelegt. Erstmalig wurden diese Mikrorisse postexperimentell anhand von rasterelektronenmikroskopischen Aufnahmen klassifiziert und die maximalen Abmessungen solcher Risse in Abhaengigkeit der Auslagerungsdauer quantifiziert. Fuer alle diese Parameter wurden Kinetiken ermittelt. Weiterhin wurden wachstumsinduzierte, laterale Spannungen in der TGO anhand der Durchbiegung einer duennen Metallfolie aus reinem Bond Coat Material bestimmt. Im Rahmen eines Unterauftrags von Projektpartner Rolls-Royce wurde das mechanische Verhalten APS-gespritzter Waermedaemmschichten mittels uniaxialer Druckversuche an freistehenden, hohlzylindrischen Ringproben anwendungstypischer Dicke bei Raum- und Anwendungstemperatur untersucht. Einerseits wurde das thermoelastische Verhalten mittels weggeregelter, zyklischer Belastungsversuche ermittelt, andererseits wurde das thermoplastische Verhalten anhand von lastgeregelten Kriechexperimenten bestimmt. Um den Einfluss einer vorhergehenden

Diagnose und Therapie einer Depression im höheren Lebensalter – Einflüsse von Patienten- und Arztmerkmalen

Science.gov (United States)

von dem Knesebeck, Olaf; Bönte, Markus; Siegrist, Johannes; Marceau, Lisa; Link, Carol; McKinlay, John

2013-01-01

Zusammenfassung Studienergebnissee aus dem englischsprachigen Raum zeigen, dass diagnostische und therapeutische Entscheidungen von Hausärzten bei der Versorgung von depressiven Patienten systematischen Einflüssen unterliegen, und dass sowohl Merkmale des Arztes als auch des Patienten unabhängig vom Krankheitsbild Einfluss auf diese Entscheidungen haben. In der vorliegenden Arbeit werden Ergebnisse einer deutschen Studie präsentiert, in der die Einflüsse von Patienten- und Arztmerkmalen auf diagnostische und therapeutische ärztliche Entscheidungen bei einer Depression untersucht wurden. Unter Anwendung eines faktoriellen Experimentaldesigns spielten professionelle Schauspieler in Videofilmen die Rolle von Patienten, die Symptome für eine depressive Erkrankung äußern. In den Videofilmen, die alle auf einem identischen Skript basieren, wurden systematisch die Patientenmerkmale Alter (55 vs. 75 Jahre), Geschlecht und sozialer Status (Hausmeister vs. Lehrer) variiert. Die randomisierte Ärztestichprobe wurde nach dem Arztgeschlecht und professioneller Erfahrung ( 15 Jahre) geschichtet. Der Videofilm wurde insgesamt 128 niedergelassenen Ärzten für Allgemeinmedizin und hausärztlich tätigen Internisten in ihrer Praxis vorgespielt. Danach wurden die Ärzte zu unterschiedlichen Aspekten von Diagnose und Therapie befragt. Es wurde erhoben, ob der Arzt dem Patienten über das gezeigte Gespräch hinausgehende Fragen stellen würde, welche Diagnosen er für wahrscheinlich hält, wie sicher er sich mit seiner Diagnose ist, welche diagnostischen Tests er anordnen würde, ob er den Patienten überweisen würde oder ob er Medikamente verordnen oder ihm Empfehlungen zur Änderung seines Lebensstils geben würde. Die Ergebnisse weisen darauf hin, dass sowohl die Diagnose als auch die Therapie einer Depression durch niedergelassene Hausärzte in Deutschland nur geringfügig durch die untersuchten Merkmale der Patienten und der behandelnden Ärzte beeinflusst wird. PMID

Dimensional ranges and rolling efficiency in a tandem cold rolling mill

Energy Technology Data Exchange (ETDEWEB)

Larkiola, J.

1997-12-31

In this work, physical models and a neural network theory have been combined in order to predict the properties of a steel strip and to optimise the process parameters in cold rolling. The prediction of the deformation resistance of the material and the friction parameter is based on the physical model presented by Bland, Ford and Ellis and artificial neural network computing (ANN). The accuracy of these models has been tested and proved by using a large amount of the measured data. With the aid of these models it has been shown that (a) the small change to the relative reduction distribution can have a clear effect upon the rolling efficiency, (b) the dimensional ranges of the tandem cold roll mill can be determined and optimised and (c) the possibility to cold roll a new product of new width, strength or thickness can be determined and the parameters of the tandem cold rolling process can be optimised. (orig.) 43 refs.

[Friedrich Ludwig von Maydelli pildid Baltimaade ajaloost = Friedrich Ludwig von Maydells Baltische Geschichte in Bildern = Friedrich Ludwig von Maydell ́s Baltic history in images] / Ulrike Plath

Index Scriptorium Estoniae

Plath, Ulrike, 1972-

2014-01-01

Arvustus: Friedrich Ludwig von Maydelli pildid Baltimaade ajaloost = Friedrich Ludwig von Maydells Baltische Geschichte in Bildern = Friedrich Ludwig von Maydell ́s Baltic history in images. Eesti kunstimuuseum, Kadrioru kunstimuuseum. Tallinn 2013

Automatisierung von HiL Tests

OpenAIRE

Asbach, Lennart; Ebrecht, Lars

2010-01-01

Automatisierung von HiL Tests. Darstellung und Bewertung einer praktischen Umsetzung. Das Poster zeigt die Motivation, die Durchführung, einen aktuellen Stand und einen Ausblick der Testautomatisierung im Bahnlabor RailSiTe. Als Beispiel dient der Konformitätstest von ETCS-Onboard Zugrechnern, um die Einführung von ETCS zu unterstützen.

Die Wirkung von Desacetylcefotaxin, einem Metaboliten von Cefotaxim, in vitro und auf die experimentelle Infektion mit Escherichia coli

OpenAIRE

Wirbelauer, J.; Hof, H.; Hacker, Jörg

2009-01-01

Die MHK-Werte von Desacetylcefotaxim gegen verschiedene, z. T. ampicillinresistente Stämme von Escherichia coH, die mit Hilfe einer Agardilutionsmethode erhoben wurden, waren höher als die von Cefotaxim und Ceftriaxon, jedoch niedriger als die von Cefoxitin. In einem Modell der systemischen Infektion der Maus mit einem plasmidtragenden, betalactamaseproduzierenden Stamm von E. coli führte die Therapie mit Desacetylcefotaxim zu einer starken Reduktion der Keime pro Leber. Im Vergleich zur Ther...

Auf in die Zukunft! Was kommt nach der bücherlosen Bibliothek? Reflexionen und Wahrnehmungsunterschiede zur Rolle von öffentlichen Bibliotheken

Directory of Open Access Journals (Sweden)

Wolfgang Kaiser

2014-03-01

Full Text Available Die Sehnsucht nach papierlosen und digitalen Bibliotheken ist auch in Deutschland weit verbreitet. Dabei entsteht der Irrglaube, die alleinige digitale Ausrichtung der eigenen Bibliothek mache diese zukunftsfähig. Ökonomisierungstendenzen, ein Mangel an Handeln nach ethischen Prinzipien, die ständige Messung von Ausleihen und Kunden sind das Spiegelbild des gegenwärtigen ideologischen Zeitgeistes. Im Artikel werden vermeintliche Glücksversprechen entlarvt und Alternativen aufgezeigt. Es wird für eine Öffnung hin zu anderen verwandten Disziplinen und der Förderung von mehr Vielfalt in der Ausbildung von Bibliothekaren und Bibliothekarinnen plädiert. Alternative Hinweise und Anregungen, welche für eine Neubewertung öffentlicher Bibliotheken eintreten, sind Teil des folgenden Beitrags. The longing for paperless and digital libraries is also very widespread in Germany as well as in other countries. At the same time there’s the misconception that the digital orientation might be the silver bullet for their institutions for a sustainable future. Tendencies of economization, the steady measurement of growth in library loans, and the notion and perception of clients and customers in libraries are a mirror image of our current ideological Zeitgeist. The article unmasks assumed promises of digitalization. It illustrates alternatives for the implementation of more democratic and participatory library policies. Furthermore the author pleads for an opening to other disciplines and the promotion of more diversity within the library field. Alternative leads and suggestions, which advocate a different evaluation of public libraries, are part of the following article.

Hemato-oncological imaging. Importance of hybrid procedures; Haematoonkologische Bildgebung. Stellenwert der Hybridverfahren

Energy Technology Data Exchange (ETDEWEB)

Mayerhoefer, M.E. [Univ.-Klinik fuer Radiologie und Nuklearmedizin, Abteilung fuer Allgemeine und Kinderradiologie, Medizinische Universitaet Wien, Wien (Austria); Haug, A. [Univ.-Klinik fuer Radiologie und Nuklearmedizin, Abteilung fuer Nuklearmedizin, Medizinische Universitaet Wien, Wien (Austria)

2016-07-15

Biomedical imaging procedures play a major role in hemato-oncological diseases with respect to pre-therapeutic staging and assessment of treatment response. Originally, the therapeutic management was the domain of computed tomography (CT) and whole-body magnetic resonance imaging (MRI). Over the last decade these purely morphological techniques have gradually been replaced by hybrid imaging techniques, such as positron emission tomography-CT (PET/CT) and PET/MRI, which also provide metabolic and functional information. For lymphomas, the PET tracer 18F-fluorodeoxyglucose (18 F-FDG) is meanwhile so well-established that its use is a cornerstone of the Lugano classification; however, for multiple myeloma the search for an optimal PET tracer that can also detect early disease stages is still ongoing. Functional MRI techniques, such as diffusion-weighted imaging (DWI), perfusion-weighted imaging and dynamic contrast-enhanced imaging have shown promising results for both lymphomas and multiple myelomas. The PET/MRI technique can combine the different types of information due to its truly multiparametric approach. In the future PET/MRI could possibly become the hybrid imaging technique of choice for hemato-oncological diseases. (orig.) [German] Bildgebende Verfahren spielen bei haematoonkologischen Erkrankungen eine wesentliche Rolle fuer das Staging vor der Therapie und die Beurteilung des Therapieansprechens. Urspruenglich waren es v. a. die CT und die Ganzkoerper-MRT, welche die fuer das therapeutische Management relevanten Informationen lieferten. Im letzten Jahrzehnt erfolgte bei dieser Gruppe von Tumorerkrankungen jedoch eine Abkehr von den rein morphologischen Verfahren hin zu den Hybridverfahren Positronenemissionstomographie(PET)-CT und PET-MRT, welche auch metabolische und funktionelle Informationen liefern. Bei Lymphomen steht der PET-Tracer {sup 18}F-Fluordesoxyglukose ({sup 18}F-FDG) mittlerweile im Zentrum der Diagnostik und ist auch fest in der aktuellen

Eine Analyse des Zusammenhangs zwischen dem Konsum von Alkopops und dem Problemverhalten von Jugendlichen

OpenAIRE

Metzner, Cornelia Beate Isabel

2007-01-01

Zielsetzung: In dieser Arbeit wird untersucht, ob bei Jugendlichen ein Zusammenhang zwischen dem Konsum von Alkopops einerseits und dem sonstigen Alkoholtrinkverhalten, dem Konsum von Zigaretten und illegalen Drogen sowie weiteren Risikoverhaltensweisen andererseits besteht, ferner ob sich Unterschiede im Verhalten von Jungen und Mädchen ergeben. Theoretischer und empirischer Hintergrund: �Alkopops�, d. h. Mischgetränke diverser Hersteller aus Likör bzw. Schnaps und Limonade sowie wein- ...

Advanced cold rolled steels for automotive applications

Energy Technology Data Exchange (ETDEWEB)

Hofmann, H. [ThyssenKrupp Steel AG, Eberhardstrasse 12, 44145 Dortmund (Germany); Mattissen, D.; Schaumann, T.W. [ThyssenKrupp Steel AG, Duisburg (Germany)

2006-09-15

Advanced multiphase steels offer a great potential for bodies-in-white through their combination of formability and achievable component strength levels. They are first choice for strength and crash-relevant parts of challenging geometry. The intensive development of high-strength multiphase steels by ThyssenKrupp has led to hot dip galvanizing concepts with an outstanding forming potential. Hot rolled, hot dip galvanized complex phase steels are currently produced in addition to cold rolled DP and RA steels. New continuously annealed grades with tensile strength levels of up to 1000 MPa in combination with sufficient ductility for applications mainly in the field of structural automobile elements make use of the classic advantages of microalloying as well as the principles of DP and TRIP steels. Further improvement of properties will be reached by the new class of high manganese alloyed steels. (Abstract Copyright [2006], Wiley Periodicals, Inc.) [German] Fortschrittliche Multiphasen-Staehle eroeffnen wegen der inzwischen erreichbaren Kombination aus Umformbarkeit und Bauteilfestigkeit ein enormes Potenzial fuer Rohkarosserien. Sie stellen eine erste Wahl dar, wenn es um Festigkeit und um Crashsicherheit geht und besondere Anforderungen an die Bauteilgeometrien gestellt werden. Bei ThyssenKrupp hat die Entwicklung hochfester Multiphasen-Staehle in Verbindung mit dem Feuerverzinken zur Realisierung von Blechhalbzeugen gefuehrt, die hervorragend formbar sind. Es werden heute feuerverzinkte Komplexphasenstaehle neben den bewaehrten kaltgewalzten Dualphasen(DP) - und Retained Austenit(RA)-Staehlen produziert. Die neuen kontinuierlich gegluehten Stahlvarianten mit Festigkeiten bis zu 1000 MPa in Kombination mit der bei Strukturbauteilen im Automobilbau geforderten Duktilitaet nutzen sowohl die klassischen Vorteile des Mikrolegierens aus und dazu die Prinzipien, die man bei DP- und TRIP-Staehlen anwendet. Eine weitere Verbesserung des Eigenschaftsprofils wird mit dem

Effect of rolling reduction on the development of rolling and recrystallization textures in Al-Mg alloys

Energy Technology Data Exchange (ETDEWEB)

Endou, S; Inagaki, H [Shonan Inst. of Tech., Fujisawashi (Japan)

2002-07-01

In order to investigate the effect of Mg content on the development of the rolling textures in Al pure Al, Al-3% Mg alloy and Al-5% Mg alloy were cold rolled by varying rolling reductions up to 97%. Their rolling textures were investigated by the orientation distribution function analysis. The extent of work hardening introduced by cold rolling was estimated by the hardness measurements. It was found that, at all rolling reductions, the main orientations of the rolling textures depended strongly on the Mg content. In pure Al, {l_brace}123{r_brace} left angle 634 right angle was always the main orientation, whereas {l_brace}112{r_brace} left angle 111 right angle was most strong in the Al-3%Mg alloy. In the Al-5% Mg alloy, the development of both {l_brace}123{r_brace} left angle 634 right angle and {l_brace}112{r_brace} left angle 111 right angle were strongly suppressed, whereas {l_brace}110{r_brace} left angle 112 right angle developed remarkably. In pure Al, most of the texture development occurred at the later half of work hardening, i.e. at rolling reductions above 70%. With increasing Mg content, rolling texture tended to develop already at lower rolling reductions. Dynamic recovery, which occurred at very high rolling reductions, suppressed the development of the rolling textures. All these results strongly suggested that the formation of dislocation cell structures and shear banding are origins of the formation of these rolling textures. On annealing these specimens at 450 C for 30 min, recrystallization textures developed only in specimens having strong rolling textures, i. e. in the specimens cold rolled more than 70%. {l_brace}100{r_brace} left angle 001 right angle developed only in pure Al and in the Al-3% Mg ally, in which {l_brace}123{r_brace} left angle 634 right angle and {l_brace}112{r_brace} left angle 111 right angle were strong in the rolling textures. Recrystallization textures of the Al-5% Mg alloy was wather random. Its main orientation, {l

Innovation for improvement of pedestrian protection as the challenge for the development of front-end structures of passenger cars; Innovationen zur Verbesserung des Fussgaengerschutzes als Herausforderung fuer die Entwicklung von PKW-Vorbaustrukturen

Energy Technology Data Exchange (ETDEWEB)

Kramer, F.; Weidemann, W.; Jansohn, W.; Schneider, M. [EDAG Engineering and Design AG, Fulda (Germany)

2001-07-01

Requirements for improvement of pedestrian protection are the result of real-world accidents and test conditions, which take an important role in development of front-end structures of passenger cars at present, based on legal regulations (EU directives expected in 2005) and on car assessment programmes (application as per EuroNCAP since 1997). Styling and packaging are major considerations in conceptual realisation on a large scale. Furthermore, demands for minimisation of weight and cost have to be considered as marginal conditions. Solutions for this conflict of aims, which results from the new safety requirements and performance criteria for front-end structures, are to be represented and discussed based on concrete examples. (orig.) [German] Anforderungen zur Verbesserung des Fussgaengerschutzes resultieren einerseits aus dem Unfallgeschehen und andererseits aus Versuchsbedingungen, die derzeit auf der Basis von gesetzlichen Regelungen (erwartete EU-Richtlinie etwa im Jahr 2005) und von Sicherheitsbewertungen (Anwendung im Rahmen von EuroNCAP seit 1997) in der Vorbau-Entwicklung von Personenkraftwagen eine bedeutende Rolle einnehmen. Die konzeptionelle Umsetzung tangiert sowohl Styling als auch Packaging in erheblichem Umfang, darueber hinaus sind als Randbedingungen die Forderungen nach der Minimierung von Gewicht und Kosten zu beruecksichtigen. Die Loesungen dieses Zielkonfliktes, deren Wirkungsfeld durch die neuen Sicherheitsanforderungen und die Auslegungskriterien fuer Vorbaustrukturen aufgespannt wird, sollen anhand von konkreten Beispielen dargestellt und diskutiert werden. (orig.)

Recrystallization texture in nickel heavily deformed by accumulative roll bonding

Science.gov (United States)

Mishin, O. V.; Zhang, Y. B.; Godfrey, A.

2017-07-01

The recrystallization behavior of Ni processed by accumulative roll bonding to a total accumulated von Mises strain of 4.8 has been examined, and analyzed with respect to heterogeneity in the deformation microstructure. The regions near the bonding interface are found to be more refined and contain particle deformation zones around fragments of the steel wire brush used to prepare the surface for bonding. Sample-scale gradients are also observed, manifested as differences between the subsurface, intermediate and central layers, where the distributions of texture components are different. These heterogeneities affect the progress of recrystallization. While the subsurface and near-interface regions typically contain lower frequencies of cube-oriented grains than anywhere else in the sample, a strong cube texture forms in the sample during recrystallization, attributed to both a high nucleation rate and fast growth rate of cube-oriented grains. The observations highlight the sensitivity of recrystallization to heterogeneity in the deformation microstructure and demonstrate the importance of characterizing this heterogeneity over several length scales.

Comparison of PET/CT with Sequential PET/MRI Using an MR-Compatible Mobile PET System.

Science.gov (United States)

Nakamoto, Ryusuke; Nakamoto, Yuji; Ishimori, Takayoshi; Fushimi, Yasutaka; Kido, Aki; Togashi, Kaori

2018-05-01

The current study tested a newly developed flexible PET (fxPET) scanner prototype. This fxPET system involves dual arc-shaped detectors based on silicon photomultipliers that are designed to fit existing MRI devices, allowing us to obtain fused PET and MR images by sequential PET and MR scanning. This prospective study sought to evaluate the image quality, lesion detection rate, and quantitative values of fxPET in comparison with conventional whole-body (WB) PET and to assess the accuracy of registration. Methods: Seventeen patients with suspected or known malignant tumors were analyzed. Approximately 1 h after intravenous injection of 18 F-FDG, WB PET/CT was performed, followed by fxPET and MRI. For reconstruction of fxPET images, MRI-based attenuation correction was applied. The quality of fxPET images was visually assessed, and the number of detected lesions was compared between the 2 imaging methods. SUV max and maximum average SUV within a 1 cm 3 spheric volume (SUV peak ) of lesions were also compared. In addition, the magnitude of misregistration between fxPET and MR images was evaluated. Results: The image quality of fxPET was acceptable for diagnosis of malignant tumors. There was no significant difference in detectability of malignant lesions between fxPET and WB PET ( P > 0.05). However, the fxPET system did not exhibit superior performance to the WB PET system. There were strong positive correlations between the 2 imaging modalities in SUV max (ρ = 0.88) and SUV peak (ρ = 0.81). SUV max and SUV peak measured with fxPET were approximately 1.1-fold greater than measured with WB PET. The average misregistration between fxPET and MR images was 5.5 ± 3.4 mm. Conclusion: Our preliminary data indicate that running an fxPET scanner near an existing MRI system provides visually and quantitatively acceptable fused PET/MR images for diagnosis of malignant lesions. © 2018 by the Society of Nuclear Medicine and Molecular Imaging.

Titanisierung von Implantatoberflächen

Science.gov (United States)

Zimmermann, Hanngörg; Heinlein, Markus; Guldner, Norbert W.

Titan gilt seit Jahrzehnten als einer der wichtigsten Implantatwerkstoffe in der Medizin. Neben den guten mechanischen Eigenschaften (Leichtigkeit, hohe Festigkeit etc.), besitzen Titanimplantate vor allem eine hervorragende Körperverträglichkeit, so dass die Implantate optimal in den humanen Organismus integriert werden [1]. Ist jedoch aufgrund der Anforderungen an das Implantat eine hohe Flexibilität und/ oder Elastizität gefragt, so scheidet der Werkstoff Titan aufgrund seiner spröden und unflexiblen Materialeigenschaften aus. Die Folge ist der Einsatz von Implantatmaterialien, sowohl künstlichen als auch biologischen Ursprungs, welche nicht selten eine unzureichende Biokompatibilität aufweisen und somit zu Fremdköper- und immunologischen Reaktionen und Einkapselung des Implantates führen können. Die Erhöhung der Körperverträglichkeit, eine Adaption an das biologische Umfeld und eine hohe Biokompatibilität sind demzufolge die wichtigsten Eigenschaften bei der bedarfsgerechten Herstellung von Implantaten und Implantatoberflächen. Zur Gestaltung von innovativen, biokompatiblen Oberflächen stehen unterschiedliche technische Lösungsansätze zur Verfügung. Zum einen besteht die Möglichkeit, geeignete Oberflächeneigenschaften aus dem Grundmaterial selbst zu optimieren. Dies geschieht unter anderem durch Modifikation der Werkstoffoberflächen in Form von Texturierungen und Oberflächenrauhigkeiten. Zum anderen können die Oberflächeneigenschaften unabhängig von denen des Trägermaterials gestaltet werden. Durch Funktionalisierung der Oberflächen mit geeigneten Beschichtungen oder der Zugabe von Medikamenten (Drug Eluting) werden die Kunststoffimplantate dahingehend verändert, dass eine Steigerung der Körperakzeptanz erreicht wird. Die Titanbeschichtung von Implantatoberflächen kombiniert die positiven Materialeigenschaften von Titan und Polymer.

Das polyzystische Ovarialsyndrom: Im Spannungsfeld von Hormonen und Stoffwechsel

Directory of Open Access Journals (Sweden)

Wehr E

2010-01-01

Full Text Available Das polyzystische Ovarialsyndrom (PCOS ist eine komplexe Erkrankung und betrifft mindestens 5–10 % aller Frauen. Es ist charakterisiert durch Hyperandrogenismus (klinisch und/oder biochemisch, Oligo- oder Anovulation und polyzystische Ovarien. In der Pathogenese spielt neben der Hyperandrogenämie und der abnormen Gonadotropinsekretion die Insulinresistenz eine zentrale Rolle. Ein genetischer Hintergrund des PCOS wird vermutet, neben verschiedenen Kandidatengenen werden auch genomweite Assoziationsstudien neue Kenntnisse bringen, um in Zukunft sowohl Diagnose als auch Therapie des PCOS zu vereinfachen. Das PCOS bringt ein hohes metabolisches Risiko mit sich, ca. die Hälfte aller betroffenen Frauen ist adipös, viele leiden an Insulinresistenz, Glukosetoleranzstörungen und Diabetes mellitus Typ 2. Weiters sind viele Frauen mit PCOS von unerfülltem Kinderwunsch, Hirsutismus, Akne und androgenetischer Alopezie betroffen. Vor allem Adipositas und Hirsutismus führen zu einer starken psychischen Belastung betroffener Frauen, das Suizidrisiko ist deutlich erhöht. Zur exakten Diagnose des PCOS bedarf es einer genauen Anamnese und körperlichen Untersuchung mit anthropometrischen Messungen und Hirsutismus-Score. Ein Hormonstatus mit Bestimmung von Androgenen ist unerlässlich, ein LHRH-Test kann weitere diagnostische Hinweise liefern. Weiters sollten zur metabolischen Abklärung ein oraler Glukosetoleranztest, eine Messung der Körperfettverteilung und die Bestimmung eines Lipidstatus erfolgen. Therapeutisch ist vor allem bei adipösen Frauen eine Lebensstilintervention am wichtigsten, zusätzlich kommen Insulinsensitizer und orale Kontrazeptiva zum Einsatz. Zusammenfassend ist das PCOS eine extrem häufige Erkrankung mit komplexen Folgen und bedarf einer konsequenten, interdisziplinären individuellen Therapie bei betroffenen Frauen.

On the constant-roll inflation

Science.gov (United States)

Yi, Zhu; Gong, Yungui

2018-03-01

The primordial power spectra of scalar and tensor perturbations during slow-roll inflation are usually calculated with the method of Bessel function approximation. For constant-roll or ultra slow-roll inflation, the method of Bessel function approximation may be invalid. We compare the numerical results with the analytical results derived from the Bessel function approximation, and we find that they differ significantly on super-horizon scales if the constant slow-roll parameter ηH is not small. More accurate method is needed for calculating the primordial power spectrum for constant-roll inflation.

Comparison between PET/MR and PET/CT in evaluation of oncological patients%PET/MR与PET/CT的对比研究

Institute of Scientific and Technical Information of China (English)

徐白萱; 富丽萍; 关志伟; 尹大一; 刘家金; 杨晖; 张锦明; 陈英茂; 安宁豫

2014-01-01

Objective To verify the feasibility of the integrated PET/MR for oncological applications by comparing PET/MR with PET/CT in terms of lesion detection and quantitative measurement.Methods A total of 277 patients (165 males,112 females,average age (52.9± 12.6) years) voluntarily participated in this same-day PET/CT and PET/MR comparative study.The time interval between the two studies was 15-35 min.PET/CT images were acquired and reconstructed following standard protocols.PET/MR covered the body trunk with a sequence combination of transverse T1 weighted imaging (WI) 3D-volumetric interpolated breath-hold,T2WI turbo spin echo with fat saturation,diffusion-weighted imaging,and simultaneous PET acquisition.PET images were reconstructed by vender-provided attenuation correction methods.The results of PET/CT and PET/MR were regarded as positive if any modality (CT,PET or MRI) was positive.SUVmax was obtained by the manually drawn ROI.Detection rates were compared with x2 test and SUVmax from the two modalities was analyzed with Spearman correlation analysis.Results A total of 353 lesions were detected in 220 patients.Compared to PET/CT,PET/MR revealed 30 additional true-positive lesions,while missed 6.The detection rates between PET/CT and PET/MR were significantly different (P＜0.05).The lesion-based and patient-based consistency was 89.8％ (317/353) and 85.9％ (189/220),respectively.There were significant correlations of SUVmax between PET/MR and PET/CT for lesions(rs =0.91,P＜0.01) and for normal tissues(rs =0.62-0.76,all P＜0.01).Conclusions With reference to PET/CT,integrated PET/MR may provide comparable semi-quantitative measurements of pathological lesions as well as normal tissues.Integrated PET/MR may be more effective to detect lesions in abdomen and pelvis.%目的 通过与PET/CT在病灶检测及定量分析方面的比较,论证PET/MR一体机应用于临床的可行性.方法 2012年5月至2013年2月共300例患者同天间隔15 ～ 35 min行PET/CT和PET

Significance and occurrence of gas hydrates in offshore areas; Bedeutung und Vorkommen von Gashydraten im Offshore-Bereich

Energy Technology Data Exchange (ETDEWEB)

Wehner, H.; Faber, E. [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany)

1997-12-31

The present contribution describes the boundary and stability conditions under which gas hydrates are able to exist. It also discusses the occurrence and genesis of gas hydrates and their role as an energy raw material of the future. Furthermore, it deals with the possibility of gas hydrates being the cause of submarine slumps and with their influence on the climate. (MSK) [Deutsch] Die Rand-und Stabilitaetsbedingungen unter denen die Gashydrate existent sein koennen werden beschrieben. Ebenso wird das Vorkommen von Gashydraten, ihre Genese und ihre Rolle als Energierohstoff der Zukunft diskutiert. Darueberhinaus werden die Gashydrate als moegliche Ursache fuer untermeerische Rutschungen und ihr Einfluss auf Klimaaenderungen erlaeutert.

Technology development for roll-to-roll production of organic photovoltaics

NARCIS (Netherlands)

Galagan, Y.O.; Vries, I.G. de; Langen, A.P.; Andriessen, H.A.J.M.; Verhees, W.J.H.; Veenstra, S.C.; Kroon, J.M.

2011-01-01

In order to reach the objective of low-cost, large area organic photovoltaic systems, we build up a knowledge base concerning the influence of process conditions on the performance of polymer solar cells. A large area solar cell module, with roll-to-roll coated PEDOT:PSS and photoactive layers

Rolling Force Prediction in Heavy Plate Rolling Based on Uniform Differential Neural Network

Directory of Open Access Journals (Sweden)

Fei Zhang

2016-01-01

Full Text Available Accurate prediction of the rolling force is critical to assuring the quality of the final product in steel manufacturing. Exit thickness of plate for each pass is calculated from roll gap, mill spring, and predicted roll force. Ideal pass scheduling is dependent on a precise prediction of the roll force in each pass. This paper will introduce a concept that allows obtaining the material model parameters directly from the rolling process on an industrial scale by the uniform differential neural network. On the basis of the characteristics that the uniform distribution can fully characterize the solution space and enhance the diversity of the population, uniformity research on differential evolution operator is made to get improved crossover with uniform distribution. When its original function is transferred with a transfer function, the uniform differential evolution algorithms can quickly solve complex optimization problems. Neural network structure and weights threshold are optimized by uniform differential evolution algorithm, and a uniform differential neural network is formed to improve rolling force prediction accuracy in process control system.

Pet Problems at Home: Pet Problems in the Community.

Science.gov (United States)

Soltow, Willow

1984-01-01

Discusses problems of pets in the community, examining the community's role related to disruptive pets and pet overpopulation. Also discusses pet problems at home, offering advice on selecting a pet, meeting a pet's needs, and disciplining pets. Includes a list of books, films/filmstrips, teaching materials, and various instructional strategies.…

Finite-element model to predict roll-separation force and defects during rolling of U-10Mo alloys

Science.gov (United States)

Soulami, Ayoub; Burkes, Douglas E.; Joshi, Vineet V.; Lavender, Curt A.; Paxton, Dean

2017-10-01

A major goal of the Convert Program of the U.S. Department of Energy's National Nuclear Security Administration (DOE/NNSA) is to enable high-performance research reactors to operate with low-enriched uranium rather than the high-enriched uranium currently used. To this end, uranium alloyed with 10 wt% molybdenum (U-10Mo) represents an ideal candidate because of its stable gamma phase, low neutron caption cross section, acceptable swelling response, and predictable irradiation behavior. However, because of the complexities of the fuel design and the need for rolled monolithic U-10Mo foils, new developments in processing and fabrication are necessary. This study used a finite-element code, LS-DYNA, as a predictive tool to optimize the rolling process. Simulations of the hot rolling of U-10Mo coupons encapsulated in low-carbon steel were conducted following two different schedules. Model predictions of the roll-separation force and roll pack thicknesses at different stages of the rolling process were compared with experimental measurements. The study reported here discussed various attributes of the rolled coupons revealed by the model (e.g., waviness and thickness non-uniformity like dog-boning). To investigate the influence of the cladding material on these rolling defects, other cases were simulated: hot rolling with alternative can materials, namely, 304 stainless steel and Zircaloy-2, and bare-rolling. Simulation results demonstrated that reducing the mismatch in strength between the coupon and can material improves the quality of the rolled sheet. Bare-rolling simulation results showed a defect-free rolled coupon. The finite-element model developed and presented in this study can be used to conduct parametric studies of several process parameters (e.g., rolling speed, roll diameter, can material, and reduction).

75 FR 42782 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

Science.gov (United States)

2010-07-22

...)] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia AGENCY: United... Brazil and Japan, and the suspended investigation on hot-rolled steel from Russia. SUMMARY: The... Japan, and the suspended investigation on hot-rolled steel from Russia would be likely to lead to...

75 FR 62566 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

Science.gov (United States)

2010-10-12

...)] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia AGENCY: United... antidumping duty investigation on hot-rolled steel from Russia. SUMMARY: The Commission hereby gives notice of... suspended investigation on hot-rolled steel from Russia would be likely to lead to continuation or...

Gastroenteropancreatic endocrine tumors; Gastroenteropankreatische endokrine Tumoren

Energy Technology Data Exchange (ETDEWEB)

Schmid-Tannwald, C.; Schmid-Tannwald, C.M.; Reiser, M.F.; Berger, F. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Institut fuer Klinische Radiologie, Muenchen (Germany)

2014-10-15

% aller gastrointestinalen Tumoren ausmacht. Fuer die Lokalisation des Primaertumors als auch fuer das Staging endokriner Tumoren spielen neben der Ultraschalldiagnostik die Computertomographie (CT), die Magnetresonanztomographie (MRT) und die Positronenemissionstomographie-Computertomographie (PET-CT) eine entscheidende Rolle. Neben dem Primaerstaging lassen sich mithilfe der PET-CT mit Somatostatinanaloga auch die Indikation fuer eine Radionuklidtherapie stellen und der Therapieverlauf dokumentieren. Das CT-Enteroklysma erreicht nach der Literatur bei Duenndarmtumoren bis 3 cm eine Sensitivitaet von 84,7 %, eine Spezifitaet von 96,9 %; mit der Magnetresonanzenterographie (MRE) kann ein neuroendokriner Tumor (NET) des Duenndarms in 93,3 % der Faelle lokalisiert werden. Laut Literatur ist die MRT bei der Detektion pankreatischer NET mit einer Sensitivitaet zwischen 74 und 100 % der CT ueberlegen. Die PET-CT ermoeglicht die Detektion sehr kleiner Primaertumoren und gilt als sensitivste Methode zur Lokalisationsdiagnostik. Bei der Detektion von Lebermetastasen ist die MRT der CT und der PET-CT ueberlegen. Aufgabe der bildgebenden Diagnostik ist es, neben der Lokalisation des Primaertumors und dem Staging, Therapien zu planen und ein Therapieansprechen zu dokumentieren. Die Wahl der verschiedenen bildgebenden Verfahren hierfuer ist abhaengig von der Lokalisation des Primaertumors. Da gastroenteropankreatische neuroendokrine Tumoren (GEP-NET) ueberwiegend hypervaskularisiert sind, ist eine biphasische Untersuchungstechnik nach Kontrastmittelgabe in arterieller und venoeser Phase fuer die Abklaerung von Primaertumoren und Metastasen sowohl in der CT wie in der MRT obligat. Fuer das Ganzkoerperstaging kommen vorrangig CT und PET-CT zum Einsatz. (orig.)

Roll paper pilot. [mathematical model for predicting pilot rating of aircraft in roll task

Science.gov (United States)

Naylor, F. R.; Dillow, J. D.; Hannen, R. A.

1973-01-01

A mathematical model for predicting the pilot rating of an aircraft in a roll task is described. The model includes: (1) the lateral-directional aircraft equations of motion; (2) a stochastic gust model; (3) a pilot model with two free parameters; and (4) a pilot rating expression that is a function of rms roll angle and the pilot lead time constant. The pilot gain and lead time constant are selected to minimize the pilot rating expression. The pilot parameters are then adjusted to provide a 20% stability margin and the adjusted pilot parameters are used to compute a roll paper pilot rating of the aircraft/gust configuration. The roll paper pilot rating was computed for 25 aircraft/gust configurations. A range of actual ratings from 2 to 9 were encountered and the roll paper pilot ratings agree quite well with the actual ratings. In addition there is good correlation between predicted and measured rms roll angle.

Evaluation of PET Scanner Performance in PET/MR and PET/CT Systems: NEMA Tests

OpenAIRE

Mustafa Demir; Türkay Toklu; Mohammad Abuqbeitah; Hüseyin Çetin; H. Sezer Sezgin; Nami Yeyin; Kerim Sönmezoğlu

2018-01-01

Objective: The aim of the present study was to compare the performance of positron emission tomography (PET) component of PET/computed tomography (CT) with new emerging PET/magnetic resonance (MR) of the same vendor. Methods: According to National Electrical Manufacturers Association NU2-07, five separate experimental tests were performed to evaluate the performance of PET scanner of General Electric GE company; SIGNATM model PET/MR and GE Discovery 710 model PET/CT. The main investigated...

Evaluation of PET Scanner Performance in PET/MR and PET/CT Systems: NEMA Tests

OpenAIRE

Demir, Mustafa; Toklu, Türkay; Abuqbeitah, Mohammad; Çetin, Hüseyin; Sezgin, H. Sezer; Yeyin, Nami; Sönmezoğlu, Kerim

2018-01-01

Objective: The aim of the present study was to compare the performance of positron emission tomography (PET) component of PET/computed tomography (CT) with new emerging PET/magnetic resonance (MR) of the same vendor. Methods: According to National Electrical Manufacturers Association NU2-07, five separate experimental tests were performed to evaluate the performance of PET scanner of General Electric GE company; SIGNATM model PET/MR and GE Discovery 710 model PET/CT. The main investigated asp...

Facetten der Kooperation von christlicher und muslimischer Theologie an der Universität Wien

Directory of Open Access Journals (Sweden)

Ednan Aslan

2015-11-01

Full Text Available ENGLISH: The Islamic Religious Pedagogy programme at the University of Vienna was the first one of its kind at a European university. With its establishment it became centre stage in politics and media. At the beginning the programme could not meet the high expectations it was subjected to due to a lack of professional staff. At this difficult phase the programme benefited greatly from the cooperation with the faculties of Catholic and Protestant Theology as the programme was able to learn from the established Christian religious educationalists. This learning process was particularly geared towards teaching, research and interreligious encounters. DEUTSCH: Die Islamische Religionspädagogik (IRP an der Universität Wien war das erste entsprechende Institut an einer europäischen Universität. Mit der Gründung trat die IRP in das Rampenlicht von Politik und Medien. In ihren Anfängen war die IRP den sehr hohen Erwartungen fachlich wie personell kaum gewachsen. In dieser schwierigen Phase spielte die Zusammenarbeit mit der Katholisch-Theologischen (KTF sowie der Evangelisch-Theologischen Fakultät (ETF eine wichtige Rolle, weil die IRP von den fachlichen Erfahrungen der etablierten christlichen Religionspädagogiken lernen konnte. Dieser Lernprozess bezog sich insbesondere auf Lehre, Forschung und interreligiöse Begegnung.

Lengthening the lifetime of roll-to-roll produced polymer solar cells

DEFF Research Database (Denmark)

Madsen, Morten Vesterager

the knowledge of the degradation mechanisms involved in roll-to-roll coated polymer solar cells. While only a part of the experiments have directly involved roll-to-roll coated devices, most of the work is applicable to coated devices. The first part of the dissertation is devoted to the study of in......The field of polymer solar cells is a field with an exponential growth in the number of published papers. It is a field defined by a set of challenges including; efficiency, stability and processability. Before all of these challenges have been addressed; polymer solar cells...... will not be a commercial success. This dissertation is devoted primarily to the study of the stability of polymer solar cells, and more specifically to designing and verifying experimental techniques, procedures, and automated solutions to stability tests and characterization. The goal of the project was to expand...

Influences of rolling method on deformation force in cold roll-beating forming process

Science.gov (United States)

Su, Yongxiang; Cui, Fengkui; Liang, Xiaoming; Li, Yan

2018-03-01

In process, the research object, the gear rack was selected to study the influence law of rolling method on the deformation force. By the mean of the cold roll forming finite element simulation, the variation regularity of radial and tangential deformation was analysed under different rolling methods. The variation of deformation force of the complete forming racks and the single roll during the steady state under different rolling modes was analyzed. The results show: when upbeating and down beating, radial single point average force is similar, the tangential single point average force gap is bigger, the gap of tangential single point average force is relatively large. Add itionally, the tangential force at the time of direct beating is large, and the dire ction is opposite with down beating. With directly beating, deformation force loading fast and uninstall slow. Correspondingly, with down beating, deformat ion force loading slow and uninstall fast.

The role of hydrogen in the energy transition. Development status and perspectives; Die Rolle von Wasserstoff in der Energiewende. Entwicklungsstand und Perspektiven

Energy Technology Data Exchange (ETDEWEB)

Altmann, Matthias; Buenger, Ulrich; Landinger, Hubert; Pschorr-Schoberer, Evi; Raksha, Tetyana; Wurster, Reinhold; Zerta, Martin (comps.)

2014-06-15

Hydrogen and fuel cells have great potential and are currently at the threshold of commercialization. Baden-Wuerttemberg and German companies and research institutions have created a good starting point for participating in these growth markets internationally. With dwindling fossil resources, the phasing out of nuclear energy and international targets for reducing greenhouse gas emissions, the entire energy system is fundamentally changing and will be fully converted over the long term to renewable energy sources. While in the past chemical sources of energy dominated as the primary source of energy, in the future these will be superseded in particular by electricity as a renewable, largely fluctuating primary energy. At the same time, however, the easy storage and transportability of energy is also partially lost. An intelligent combination of electricity, gas (methane, hydrogen), heat and fuels for mobility is a prerequisite for a robust, sustainable and sustainable energy supply in Germany. The coordinated interaction between generation, transmission, distribution, storage and consumption of electrical energy enables the efficient integration of renewable energies into the energy supply system and a secure transition to the regenerative energy age. Germany needs a robust and flexible energy strategy that can provide long-term planning security for all market players. [German] Wasserstoff und Brennstoffzellen haben ein grosses Potenzial und stehen derzeit an der Schwelle der Kommerzialisierung. Baden-wuerttembergische und deutsche Unternehmen und Forschungseinrichtungen haben sich eine gute Ausgangsbasis geschaffen, um international an diesen Wachstumsmaerkten zu partizipieren. Mit knapper werdenden fossilen Ressourcen, dem Ausstieg aus der Kernenergie und den internationalen Zielen zur Verringerung von Treibhausgasemissionen aendert sich das gesamte Energiesystem fundamental und wird langfristig vollstaendig auf erneuerbare Energietraeger umgestellt

Theory of rubber friction and traction properties of car tyres; Theorie der Gummireibung und Traktionseigenschaften von Reifen

Energy Technology Data Exchange (ETDEWEB)

Klueppel, M.; Alshuth, T.; Schuster, R.H. [Deutsches Inst. fuer Kautschuktechnologie e.V., Hannover (Germany)

1998-12-31

ABS braking on dry and wet roads involves different mechanisms of rubber friction on rough surfaces. This improves car safety in terms of higher manoeuvrability and shorter braking lengths especially on wet roads. Current research focuses on optimisation of tyrecontact surface materials with better traction characteristics and lower rolling resistance. Laboratory predictions of the traction properties of tyre faces must be based on fundamental knowledge of the local sliding phenomena in the tyre contact surface and the resulting energy dissipation during ABS braking. This contribution therefore attempts to relate the elementary mechanisms of tyre mechanics in ABS braking processes to theoretical concepts of rubber friction on rough surfaces. [Deutsch] Beim ABS-Bremsen auf trockenen und nassen Strassen werden unterschiedliche Mechanismen der Gummireibung auf rauhen Oberflaechen wirksam. In der Summe bewirkt dies eine hoehere Fahrsicherheit, da neben der Manoevrierfaehigkeit des Autos auch der Bremsweg, vor allem auf nassen Strassen, verkuerzt sein kann. In diesem Zusammenhang wird zur Zeit verstaerkt an einer Optimierung von Laufflaechenmaterialien durch den Einsatz von massgeschneiderten Loesungs-SBR-Typen in Verbindung mit gefaellten Kieselsaeuren gearbeitet, wodurch neben einer Verbesserung der Traktionseigenschaften beim ABS-Bremsen auch eine Verringerung des Rollwiderstandes erreicht wird. Fuer Laborvorhersagen der Traktionseigenschaften von Reifenlaufflaechen ist ein grundlegendes Verstaendnis der lokalen Gleitphaenomene in der Reifenaufstandsflaeche und der damit verbundenen Energiedissipation beim ABS-Bremsen erforderlich. In dieser Arbeit wird deshalb angestrebt, die elementaren Mechanismen der Reifenmechanik beim ABS-Bremsen mit theoretischen Konzepten der Gummireibung auf rauhen Oberflaechen in Verbindung zu bringen. (orig.)

Diagnostic imaging of injuries and overuse in soccer players; Bildgebende Diagnostik von Verletzungen und Ueberlastungsschaeden bei Fussballern

Energy Technology Data Exchange (ETDEWEB)

Jonge, M.C. de; Maas, M.; Kuijk, C. van [Department of Radiology, Academic Medical Center, University of Amsterdam (Netherlands)

2002-10-01

Soccer is one of the most popular sports worldwide. There is a high incidence of injuries in soccer in which several intrinsic and extrinsic factors play a part. Most injuries are minor, self-limiting and do not need extensive medical treatment or imaging. Imaging can be required for several reasons e.g. when the clinical findings are doubtful, to replace arthroscopy (i. e. of the knee) or for prognostic reasons. All imaging modalities available to the radiologist can be used but MRI is the most valuable imaging modality with its superior contrast resolution and multiplanar capabilities. Basically, injuries in the soccer player can occur anywhere in the body like in every sport. The lower extremities, more specific the knee and ankle, are however the most injured parts. (orig.) [German] Fussball ist eine der weltweit populaersten Sportarten, und Verletzungen sind mit hoher Inzidenz zu finden, wobei bestimmte intrinsische und extrinsische Faktoren eine pathogenetisch wesentliche Rolle spielen. Der Schweregrad von Verletzungen ist meist gering und selbstlimitierend, eine ausgiebige Behandlung oder die Durchfuehrung bildgebender diagnostischer Massnahmen sind nicht noetig. Die radiologische Untersuchung ist indiziert bei klinisch unklaren Befunden, zur Planung einer etwaigen Arthroskopie oder zur klinisch-prognostischen Einschaetzung der Veraenderungen. Von den verfuegbaren Modalitaeten ist die MRT von groesster Bedeutung. Verletzungen als Folge des Fussballspielens sind in allen Koerperabschnitten zu beobachten, v. a. an den unteren Extremitaeten und hier besonders an Knie- und Sprunggelenk. (orig.)

Nutzerorientiertes Management von materiellen und immateriellen Informationsobjekten

OpenAIRE

Hübsch, Chris

2001-01-01

Schaffung einer stabilen, erweiterbaren und skalierbaren Infrastruktur für die Bereitstellung von Diensten im Umfeld von Bibliotheken und ähnlichen wissensanbietenden Einrichtungen unter Verwendung von XML-RPC und Python.

75 FR 64246 - Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil: Correction to Notice of...

Science.gov (United States)

2010-10-19

...-Rolled Carbon-Quality Steel Products From Brazil: Correction to Notice of Antidumping Duty Order AGENCY... certain hot-rolled flat-rolled carbon-quality steel products from Brazil. See Antidumping Duty Order: Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, 67 FR 11093 (March 12, 2002...

Rolling Shutter Motion Deblurring

KAUST Repository

Su, Shuochen

2015-06-07

Although motion blur and rolling shutter deformations are closely coupled artifacts in images taken with CMOS image sensors, the two phenomena have so far mostly been treated separately, with deblurring algorithms being unable to handle rolling shutter wobble, and rolling shutter algorithms being incapable of dealing with motion blur. We propose an approach that delivers sharp and undis torted output given a single rolling shutter motion blurred image. The key to achieving this is a global modeling of the camera motion trajectory, which enables each scanline of the image to be deblurred with the corresponding motion segment. We show the results of the proposed framework through experiments on synthetic and real data.

Die Verteilung und Eigenschaften von Bodenformen in der Deutschen Bucht, eine Rekonstruktion der Karten von Ulrich (1973)

DEFF Research Database (Denmark)

Winter, Christian; Lefebvre, Alice; Benninghoff, Markus

2015-01-01

Entstehung, Gestalt und Dynamik von Bodenformen in vergleichsweise kleinen Untersuchungsgebieten ist die Arbeit von ULRICH (1973) über die Verteilung von Bodenformen in der Deutschen Bucht bis heute die einzige verfügbare zusammenhängende Darstellung für die deutsche Nordseeküste. Die analogen Karten und die...

Von der Vielfalt einer Institution

OpenAIRE

Kabaum, Marcel; Buck, Marc Fabian

2013-01-01

Von der Vielfalt von Universitäten bzw. higher education institutions (HEIs) zu sprechen heißt, sich dem Dickicht an Komplexität zu stellen, das sich zwischen ihren Ideen und Realitäten ausbreitet. Der Text führt in den Sammelband "Ideen und Realitäten von Universitäten" ein und hebt die verschiedenen disziplinären Sichtweisen sowie die internationale Breite - Deutschland, Südamerika, USA, Afghanistan und China - der Beiträge hervor. (DIPF/Orig.)

Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells

KAUST Repository

Dupont, Stephanie R.; Oliver, Mark; Krebs, Frederik C.; Dauskardt, Reinhold H.

2012-01-01

The interlayer adhesion of roll-to-roll processed flexible inverted P3HT:PCBM bulk heterojunction (BHJ) polymer solar cells is reported. Poor adhesion between adjacent layers may result in loss of device performance from delamination driven

A Coupled Model for Work Roll Thermal Contour with Subsectional Cooling in Aluminum Strip Cold Rolling

Directory of Open Access Journals (Sweden)

Shao Jian

2014-10-01

Full Text Available Little attention had been given to the evaluation of subsectional cooling control ability under complicated working conditions. In this paper, heat generation was calculated by using finite difference method. Strip hardening, work roll elastic deformation and elastic recovery of strip were taken into account. The mean coefficient of convective heat transfer on work roll surface was simulated by FLUENT. Calculation model had used the alternative finite difference scheme, which improved the model stability and computing speed. The simulation result shows that subsectional cooling control ability is different between different rolling passes. Positive and negative control abilities are roughly the same in the same pass. The increase of rolled length, working pressure of header and friction coefficient has positive effect on subsectional cooling control ability, and the rolling speed is on the contrary. On the beginning of the pass, when work roll surface has not reached the stable temperature, control ability of subsectional cooling is mainly affected by rolled length. The effect of mean coefficient of convective heat transfer and coefficient of friction is linear. When rolling speed is over 500 m/min, control ability of subsectional cooling becomes stable.

Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules

DEFF Research Database (Denmark)

Benatto, Gisele Alves dos Reis; Roth, Bérenger; Corazza, Michael

2016-01-01

We report the use of roll-to-roll printed silver nanowire networks as front electrodes for fully roll-to-roll processed flexible indium-tin-oxide (ITO) free OPV modules. We prepared devices with two types of back electrodes, a simple PEDOT:PSS back electrode and a PEDOT:PSS back electrode...

Beeinflussung der Wirkung von Ernährungsinformation durch Framing: Analyse am Beispiel von Folsäure

OpenAIRE

Lensch, Kathrin; Hartmann, Monika; Simons, Johannes

2011-01-01

Die Bereitstellung und verbrauchergerechte Aufbereitung von Informationen stellt eine Möglichkeit dar, Konsumenten darin zu unterstützen, Gesundheitsaspekte vermehrt in das Kauf- und Essverhalten zu integrieren. In der Verhaltensökonomik gelten Framing-Effekte als wichtige Bestimmungsfaktoren für die Wahrnehmung von Informationen. Im Rahmen des vorliegenden Beitrags werden Framing-Effekte am Beispiel von Ernährungsinformationen über Folsäure mit Hilfe eines Experiments untersucht. Die Ergebni...

Der Einfluss von sozialer Ungleichheit und kulturellen Unterschieden auf die Wahrnehmung von finanziellen und Arbeitsplatzrisiken: Überlegungen zur Risikogesellschaft

OpenAIRE

Abbott, David; Quilgars, Deborah; Jones, Anwen

2006-01-01

Der vorliegende Artikel beruht auf Daten einer Studie, die sich mit der Frage beschäftigt, wie verschiedene soziale und kulturelle Gruppen die Risiken von Einkommens- und Arbeitsplatzverlust wahrnehmen und darauf reagieren. Autoren wie LASH, DOUGLAS und LUPTON betonten die Bedeutung von Gruppenzugehörigkeit und sozialen Kategorien für die Strukturierung der Reaktionsweisen auf verschiedene Risikoarten. Sie sprechen daher lieber von Risikokulturen als von der Risikogesellschaft. Trotzdem erken...

Fabrication of Superhydrophobic Metallic Surface by Wire Electrical Discharge Machining for Seamless Roll-to-Roll Printing

Directory of Open Access Journals (Sweden)

Jin-Young So

2018-04-01

Full Text Available This paper presents a proposal of a direct one-step method to fabricate a multi-scale superhydrophobic metallic seamless roll mold. The mold was fabricated using the wire electrical discharge machining (WEDM technique for a roll-to-roll imprinting application to produce a large superhydrophobic surface. Taking advantage of the exfoliating characteristic of the metallic surface, nano-sized surface roughness was spontaneously formed while manufacturing the micro-sized structure: that is, a dual-scale hierarchical structure was easily produced in a simple one-step fabrication with a large area on the aluminum metal surface. This hierarchical structure showed superhydrophobicity without chemical coating. A roll-type seamless mold for the roll-to-roll process was fabricated through engraving the patterns on the cylindrical substrate, thereby enabling to make a continuous film with superhydrophobicity.

Comparison of lesion detection and quantitation of tracer uptake between PET from a simultaneously acquiring whole-body PET/MR hybrid scanner and PET from PET/CT

International Nuclear Information System (INIS)

Wiesmueller, Marco; Schmidt, Daniela; Beck, Michael; Kuwert, Torsten; Gall, Carl C. von; Quick, Harald H.; Navalpakkam, Bharath; Lell, Michael M.; Uder, Michael; Ritt, Philipp

2013-01-01

PET/MR hybrid scanners have recently been introduced, but not yet validated. The aim of this study was to compare the PET components of a PET/CT hybrid system and of a simultaneous whole-body PET/MR hybrid system with regard to reproducibility of lesion detection and quantitation of tracer uptake. A total of 46 patients underwent a whole-body PET/CT scan 1 h after injection and an average of 88 min later a second scan using a hybrid PET/MR system. The radioactive tracers used were 18 F-deoxyglucose (FDG), 18 F-ethylcholine (FEC) and 68 Ga-DOTATATE (Ga-DOTATATE). The PET images from PET/CT (PET CT ) and from PET/MR (PET MR ) were analysed for tracer-positive lesions. Regional tracer uptake in these foci was quantified using volumes of interest, and maximal and average standardized uptake values (SUV max and SUV avg , respectively) were calculated. Of the 46 patients, 43 were eligible for comparison and statistical analysis. All lesions except one identified by PET CT were identified by PET MR (99.2 %). In 38 patients (88.4 %), the same number of foci were identified by PET CT and by PET MR . In four patients, more lesions were identified by PET MR than by PET CT , in one patient PET CT revealed an additional focus compared to PET MR . The mean SUV max and SUV avg of all lesions determined by PET MR were by 21 % and 11 % lower, respectively, than the values determined by PET CT (p CT and PET MR were minor, but statistically significant. Nevertheless, a more detailed study of the quantitative accuracy of PET MR and the factors governing it is needed to ultimately assess its accuracy in measuring tissue tracer concentrations. (orig.)

Rolling Resistance Measurement and Model Development

DEFF Research Database (Denmark)

Andersen, Lasse Grinderslev; Larsen, Jesper; Fraser, Elsje Sophia

2015-01-01

There is an increased focus worldwide on understanding and modeling rolling resistance because reducing the rolling resistance by just a few percent will lead to substantial energy savings. This paper reviews the state of the art of rolling resistance research, focusing on measuring techniques, s......, surface and texture modeling, contact models, tire models, and macro-modeling of rolling resistance...

Computational design of rolling bearings

CERN Document Server

Nguyen-Schäfer, Hung

2016-01-01

This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

Redoxspeziation von endlagerrelevanten Elementen mit Hilfe von Trennmethoden gekoppelt an ein Massenspektrometer mit induktiv gekoppeltem Plasma

OpenAIRE

Graser, Carl-Heinrich

2015-01-01

Im Rahmen dieser Arbeit wurden Redoxspeziationsanalysen von Eisen, Neptunium und Plutonium per CE-SF-ICP-MS durchgeführt. Durch Optimierung der Trennparameter konnten Trennungen der Pu Oxidationsstufen III bis VI und Trennungen der Np Oxidationsstufen IV bis VI binnen 15 Minuten mit einer Nachweisgrenze von 10-12 M durchgeführt werden. Die Trennung der Fe Oxidationsstufen II und III gelang in weniger als 5 Minuten mit einer Nachweisgrenze von 5-10-8 M.

Microstructural and mechanical responses to various rolling speeds determined in multi-pass break-down rolling of AZ31B alloy

Science.gov (United States)

Jia, Weitao; Tang, Yan; Ning, Fangkun; Le, Qichi; Cui, Jianzhong

2018-04-01

Different rolling operations of as-cast AZ31B alloy were performed under different rolling speed (18 ∼ 72 m min‑1) and rolling pass conditions at 400 °C. Microstructural studies, tensile testing and formability evaluation relevant to each rolling operation were investigated. For 1-pass rolling, coarse average grain size (CAGS) region gradually approached the center layer as the rolling speed increased. Moreover, twins, shear bands and coarse-grain structures were the dominant components in the microstructure of plates rolled at 18, 48 and 72 m min‑1, respectively, indicating the severe deformation inhomogeneity under the high reduction per pass condition. For 2-pass rolling and 4-pass rolling, dynamic recrystallization was observed to be well and CAGS region has substantially disappeared, indicating the significant improvement in deformation uniformity and further the grain homogenization under the conditions. Microstructure uniformity degree of 2-pass rolled plates did not vary much as the rolling speed varied. On this basis, shear band distribution dominated the deformation behavior during the uniaxial tension of the 2-pass rolled plates. However, microstructure uniformity accompanied by twin distribution played a leading role in stretching the 4-pass rolled plates.

Medien und Berufsvorstellungen von Kindern: eine experimentelle Studie zum Einfluss von Kinderbüchern auf das Berufsspektrum von Kindergartenkindern

OpenAIRE

Brüggemann, Tim; Gehrau, Volker; Handrup, Jutta

2015-01-01

"Der Beitrag thematisiert zunächst den Stand der beruflichen Orientierung von Jugendlichen sowie die pädagogischen Bemühungen beim Übergang Schule-Beruf, insbesondere im Hinblick auf eine Erweiterung des häufig engen Spektrums von Berufen, die bei der Berufswahl berücksichtig werden. Dabei richten sich die Bestrebungen, diesem Problem entgegenzuwirken, bislang vor allem auf Jugendliche. Anschließend wird anhand vorliegender Ergebnisse aus der Medienforschung diskutiert, in welcher Weise Masse...

75 FR 77828 - Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil: Extension of Time Limit...

Science.gov (United States)

2010-12-14

...-Rolled Carbon-Quality Steel Products From Brazil: Extension of Time Limit for Final Results of...-Rolled Carbon Quality Steel Products From Brazil: Preliminary Results of Countervailing Duty... administrative review of the countervailing duty order on certain hot-rolled flat-rolled carbon- quality steel...

Multilength Scale Patterning of Functional Layers by Roll-to-Roll Ultraviolet-Light-Assisted Nanoimprint Lithography.

Science.gov (United States)

Leitgeb, Markus; Nees, Dieter; Ruttloff, Stephan; Palfinger, Ursula; Götz, Johannes; Liska, Robert; Belegratis, Maria R; Stadlober, Barbara

2016-05-24

Top-down fabrication of nanostructures with high throughput is still a challenge. We demonstrate the fast (>10 m/min) and continuous fabrication of multilength scale structures by roll-to-roll UV-nanoimprint lithography on a 250 mm wide web. The large-area nanopatterning is enabled by a multicomponent UV-curable resist system (JRcure) with viscous, mechanical, and surface properties that are tunable over a wide range to either allow for usage as polymer stamp material or as imprint resist. The adjustable elasticity and surface chemistry of the resist system enable multistep self-replication of structured resist layers. Decisive for defect-free UV-nanoimprinting in roll-to-roll is the minimization of the surface energies of stamp and resist, and the stepwise reduction of the stiffness from one layer to the next is essential for optimizing the reproduction fidelity especially for nanoscale features. Accordingly, we demonstrate the continuous replication of 3D nanostructures and the high-throughput fabrication of multilength scale resist structures resulting in flexible polyethylenetherephtalate film rolls with superhydrophobic properties. Moreover, a water-soluble UV-imprint resist (JRlift) is introduced that enables residue-free nanoimprinting in roll-to-roll. Thereby we could demonstrate high-throughput fabrication of metallic patterns with only 200 nm line width.

Roll forming of eco-friendly stud

Science.gov (United States)

Keum, Y. T.; Lee, S. Y.; Lee, T. H.; Sim, J. K.

2013-12-01

In order to manufacture an eco-friendly stud, the sheared pattern is designed by the Taguchi method and expanded by the side rolls. The seven geometrical shape of sheared pattern are considered in the structural and thermal analyses to select the best functional one in terms of the durability and fire resistance of dry wall. For optimizing the size of the sheared pattern chosen, the L9 orthogonal array and smaller-the-better characteristics of the Taguchi method are used. As the roll gap causes forming defects when the upper-and-lower roll type is adopted for expanding the sheared pattern, the side roll type is introduced. The stress and strain distributions obtained by the FEM simulation of roll-forming processes are utilized for the design of expanding process. The expanding process by side rolls shortens the length of expanding process and minimizes the cost of dies. Furthermore, the stud manufactured by expanding the sheared pattern of the web is an eco-friend because of the scrapless roll-forming process. In addition, compared to the conventionally roll-formed stud, the material cost is lessened about 13.6% and the weight is lightened about 15.5%.

Material-Process-Performance Relationships for Roll-to-Roll Coated PEM Electrodes

Energy Technology Data Exchange (ETDEWEB)

Mauger, Scott; Neyerlin, K.C.; Stickel, Jonathan; Ulsh, Michael; More, Karren; Wood, David

2017-04-26

Roll-to-roll (R2R) coating is the most economical and highest throughput method for producing fuel cell electrodes. R2R coating encompasses many different methodologies to create uniform films on a moving web substrate. Here we explore two coating methods, gravure and slot die, to understand the impacts of each on film uniformity and performance.

Lars von Triers film

DEFF Research Database (Denmark)

Nielsen, Lisbeth Overgaard

2007-01-01

Afhandlingen undersøger Lars von Triers filmæstetik, som den kommer til udtryk i spillefilmene fra perioden 1984-2007. Afhandlingen analyserer de enkelte films stil, virkningsstrategi og betydningsdannelse.......Afhandlingen undersøger Lars von Triers filmæstetik, som den kommer til udtryk i spillefilmene fra perioden 1984-2007. Afhandlingen analyserer de enkelte films stil, virkningsstrategi og betydningsdannelse....

Constant-roll (quasi-)linear inflation

Science.gov (United States)

Karam, A.; Marzola, L.; Pappas, T.; Racioppi, A.; Tamvakis, K.

2018-05-01

In constant-roll inflation, the scalar field that drives the accelerated expansion of the Universe is rolling down its potential at a constant rate. Within this framework, we highlight the relations between the Hubble slow-roll parameters and the potential ones, studying in detail the case of a single-field Coleman-Weinberg model characterised by a non-minimal coupling of the inflaton to gravity. With respect to the exact constant-roll predictions, we find that assuming an approximate slow-roll behaviour yields a difference of Δ r = 0.001 in the tensor-to-scalar ratio prediction. Such a discrepancy is in principle testable by future satellite missions. As for the scalar spectral index ns, we find that the existing 2-σ bound constrains the value of the non-minimal coupling to ξphi ~ 0.29–0.31 in the model under consideration.

Rolling of molybdenum and niobium tubes on cold-rolling mill with high stiff stand

Energy Technology Data Exchange (ETDEWEB)

Potapov, I N; Shejkh-Ali, A D; Filimonov, G V; Lunev, A G

1984-03-01

To develop the technique of tube production the process of rolling is studied and comparative evaluation of the structure formed is carried out. It is shown that billets of rods deformed by screw rolling have the improved plastic properties and are deformed on cold-rolling mill (CRM) with a high degree of reduction without defect formation. High stiff stand of the CRM permits to produce high-quality molybdenum tubes.

Detection of Cancer with PET and PET/CT in Asymptomatic Volunteers

International Nuclear Information System (INIS)

Chung, Ji In; Choi, Joon Young; Lee, Kyung Han; Kim, Byung Tae; Choi, Yoon Ho; Cho, Han Byoul; Shim, Jae Yong

2009-01-01

We retrospectively investigated the diagnostic performance of 18 F-fluorodeoxyglucose positron emission tomography (PET) and PET/CT for cancer detection in asymptomatic health-check examinees. This study consisted of 5091 PET or PET/CT conducted as part of annual health examination at one hospital from March 1998 to February 2008. To find the incidence of cancers, medical records of the subjects were thoroughly reviewed for a follow-up period of one year. The patterns of formal readings of PET and PET/CT were analyzed to assess the sensitivity and specificity for cancer detection. The histopathology and stage of the cancers were evaluated in relation to the results of PET. Eighty-six cancers (1.7%) were diagnosed within one year after PET or PET/CT. When PET and PET/CT results were combined, the sensitivity was 48.8% and specificity was 81.1% for cancer detection. PET only had a sensitivity of 46.2% and a specificity of 81.4%, and PET/CT only had a sensitivity of 75.0% and a specificity of 78.5% respectively. There were no significant differences in cancer site, stage and histopathology between PET positive and PET negative cancers. In 19.3% of formal readings of PET and PET/CT, further evaluation to exclude malignancy or significant disease was recommended. Head and neck area and upper gastrointestinal tract were commonly recommended sites for further evaluation. PET and PET/CT showed moderate performance for detecting cancers in asymptomatic adults in this study. More experience and further investigation are needed to overcome limitations of PET and PET/CT for cancer screening

Kulturens rolle

DEFF Research Database (Denmark)

Hasse, Cathrine

2007-01-01

Kulturens rolle. Herunder kulturens betydning for psykologisk teori og forskning set i lyset af den stigende globalisering og væksten i kulturmøder. Der gives eksempler fra hverdagssituationer, den pædagogiske praksis, fra indvandrerforskning, turister men også fra avisernes referater af kulturmø......Kulturens rolle. Herunder kulturens betydning for psykologisk teori og forskning set i lyset af den stigende globalisering og væksten i kulturmøder. Der gives eksempler fra hverdagssituationer, den pædagogiske praksis, fra indvandrerforskning, turister men også fra avisernes referater af...

Finite-element model to predict roll-separation force and defects during rolling of U-10Mo alloys

Energy Technology Data Exchange (ETDEWEB)

Soulami, Ayoub; Burkes, Douglas E.; Joshi, Vineet V.; Lavender, Curt A.; Paxton, Dean

2017-10-01

This study used a finite element code, LSDYNA, as a predictive tool to optimize the rolling process. Simulations of the hot rolling of U-10Mo coupons encapsulated in low-carbon steel were conducted following two different schedules. Model predictions of the roll-separation force and roll pack thicknesses at different stages of the rolling process were compared with experimental measurements. The study reported here discussed various attributes of the rolled coupons revealed by the model (e.g., waviness and thickness non-uniformity like dog boning). To investigate the influence of the cladding material on these rolling defects, other cases were simulated:  hot rolling with alternative can materials, namely, 304 stainless steel and Zircaloy-2, and bare-rolling.

Hot rolling of thick uranium molybdenum alloys

Science.gov (United States)

DeMint, Amy L.; Gooch, Jack G.

2015-11-17

Disclosed herein are processes for hot rolling billets of uranium that have been alloyed with about ten weight percent molybdenum to produce cold-rollable sheets that are about one hundred mils thick. In certain embodiments, the billets have a thickness of about 7/8 inch or greater. Disclosed processes typically involve a rolling schedule that includes a light rolling pass and at least one medium rolling pass. Processes may also include reheating the rolling stock and using one or more heavy rolling passes, and may include an annealing step.

PET

DEFF Research Database (Denmark)

Mariager, Rasmus Mølgaard; Schmidt, Regin; Heiberg, Morten Rievers

PET handler om den hemmelige tjenestes arbejde under den kolde krig 1945-1989. Her fortæller Regin Schmidt, Rasmus Mariager og Morten Heiberg om de mest dramatiske og interessante sager fra PET's arkiv. PET er på flere måder en udemokratisk institution, der er sat til at vogte over demokratiet....... Dens virksomhed er skjult for offentligheden, den overvåger borgernes aktiviteter, og den registrerer følsomme personoplysninger. Historien om PET rejser spørgsmålet om, hvad man skal gøre, når befolkningen i et demokrati er kritisk indstillet over for overvågningen af lovlige politiske aktiviteter......, mens myndighederne mener, at det er nødvendigt for at beskytte demokratiet. PET er på en gang en fortælling om konkrete aktioner og begivenheder i PET's arbejde og et stykke Danmarkshistorie. Det handler om overvågning, spioner, politisk ekstremisme og international terrorisme.  ...

Dr. von Braun Briefing Walt Disney

Science.gov (United States)

1965-01-01

Dr. von Braun began his association with Walt Disney in the 1950s when the rocket scientist appeared in three Disney television productions related to the exploration of space. Years later, Dr. von Braun invited Disney and his associates to tour the Marshall Space Flight Center (MSFC) in Huntsville, Alabama. This photograph is dated April 13, 1965. From left are R.J. Schwinghamer from the MSFC, Disney, B.J. Bernight, and Dr. von Braun.

Clinical usefulness of PET in the management of oral cancer. Comparison between FDG-PET and MET-PET

International Nuclear Information System (INIS)

Kitagawa, Yoshimasa; Saitoh, Masaaki; Nakamura, Mikiko

2007-01-01

Inductive chemoradiotherapy has played an important role in preserving organs and functions in patients with oral squamous cell carcinoma (SCC). To determine whether a reduced form of surgery should be performed after chemoradiotherapy, accurate evaluation of residual tumor cells is essential. We investigated the clinical value of positron emission tomography with 18 F labeled fluorodeoxyglucose (FDG-PET) in the management of oral SCCs. Forty-five patients underwent two FDG-PET studies, one prior to and one at 6 weeks after the chemoradiotherapy. Pretreatment FDG-PET was useful in predicting the response to treatment. Posttreatment FDG-PET could evaluate residual viable cells and prognosis. Organ preservation may be feasible based on PET evaluation. Hence FDG-PET is a valuable tool in the treatment of oral cancer. 11 C-Methionine (MET) is another promising tracer for PET that can be used to assess metabolic demand for amino acids in cancer cells. A MET-PET and FDG-PET study was performed during the same period to investigate diagnostic accuracy in 40 oral malignancies. Sensitivity and positive predictive value of MET-PET were 95% and 100%, respectively, and were comparable with those of FDG-PET. Further study is required to determine the diagnostic significance of MET-PET in evaluating response to chemoradiotherapy. (author)

Development of PET/MRI with insertable PET for simultaneous PET and MR imaging of human brain

International Nuclear Information System (INIS)

Jung, Jin Ho; Choi, Yong; Jung, Jiwoong; Kim, Sangsu; Lim, Hyun Keong; Im, Ki Chun; Oh, Chang Hyun; Park, Hyun-wook; Kim, Kyung Min; Kim, Jong Guk

2015-01-01

Purpose: The purpose of this study was to develop a dual-modality positron emission tomography (PET)/magnetic resonance imaging (MRI) with insertable PET for simultaneous PET and MR imaging of the human brain. Methods: The PET detector block was composed of a 4 × 4 matrix of detector modules, each consisting of a 4 × 4 array LYSO coupled to a 4 × 4 Geiger-mode avalanche photodiode (GAPD) array. The PET insert consisted of 18 detector blocks, circularly mounted on a custom-made plastic base to form a ring with an inner diameter of 390 mm and axial length of 60 mm. The PET gantry was shielded with gold-plated conductive fabric tapes with a thickness of 0.1 mm. The charge signals of PET detector transferred via 4 m long flat cables were fed into the position decoder circuit. The flat cables were shielded with a mesh-type aluminum sheet with a thickness of 0.24 mm. The position decoder circuit and field programmable gate array-embedded DAQ modules were enclosed in an aluminum box with a thickness of 10 mm and located at the rear of the MR bore inside the MRI room. A 3-T human MRI system with a Larmor frequency of 123.7 MHz and inner bore diameter of 60 cm was used as the PET/MRI hybrid system. A custom-made radio frequency (RF) coil with an inner diameter of 25 cm was fabricated. The PET was positioned between gradient and the RF coils. PET performance was measured outside and inside the MRI scanner using echo planar imaging, spin echo, turbo spin echo, and gradient echo sequences. MRI performance was also evaluated with and without the PET insert. The stability of the newly developed PET insert was evaluated and simultaneous PET and MR images of a brain phantom were acquired. Results: No significant degradation of the PET performance caused by MR was observed when the PET was operated using various MR imaging sequences. The signal-to-noise ratio of MR images was slightly degraded due to the PET insert installed inside the MR bore while the homogeneity was

Development of PET/MRI with insertable PET for simultaneous PET and MR imaging of human brain

Energy Technology Data Exchange (ETDEWEB)

Jung, Jin Ho; Choi, Yong, E-mail: ychoi.image@gmail.com; Jung, Jiwoong; Kim, Sangsu; Lim, Hyun Keong; Im, Ki Chun [Department of Electronic Engineering, Sogang University, 35 Baekbeom-ro, Mapo-gu, Seoul 121-742 (Korea, Republic of); Oh, Chang Hyun; Park, Hyun-wook [Department of Electrical Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Kim, Kyung Min; Kim, Jong Guk [Korea Institute of Radiological and Medical Science, 75 Nowon-ro, Nowon-gu, Seoul 139-709 (Korea, Republic of)

2015-05-15

Purpose: The purpose of this study was to develop a dual-modality positron emission tomography (PET)/magnetic resonance imaging (MRI) with insertable PET for simultaneous PET and MR imaging of the human brain. Methods: The PET detector block was composed of a 4 × 4 matrix of detector modules, each consisting of a 4 × 4 array LYSO coupled to a 4 × 4 Geiger-mode avalanche photodiode (GAPD) array. The PET insert consisted of 18 detector blocks, circularly mounted on a custom-made plastic base to form a ring with an inner diameter of 390 mm and axial length of 60 mm. The PET gantry was shielded with gold-plated conductive fabric tapes with a thickness of 0.1 mm. The charge signals of PET detector transferred via 4 m long flat cables were fed into the position decoder circuit. The flat cables were shielded with a mesh-type aluminum sheet with a thickness of 0.24 mm. The position decoder circuit and field programmable gate array-embedded DAQ modules were enclosed in an aluminum box with a thickness of 10 mm and located at the rear of the MR bore inside the MRI room. A 3-T human MRI system with a Larmor frequency of 123.7 MHz and inner bore diameter of 60 cm was used as the PET/MRI hybrid system. A custom-made radio frequency (RF) coil with an inner diameter of 25 cm was fabricated. The PET was positioned between gradient and the RF coils. PET performance was measured outside and inside the MRI scanner using echo planar imaging, spin echo, turbo spin echo, and gradient echo sequences. MRI performance was also evaluated with and without the PET insert. The stability of the newly developed PET insert was evaluated and simultaneous PET and MR images of a brain phantom were acquired. Results: No significant degradation of the PET performance caused by MR was observed when the PET was operated using various MR imaging sequences. The signal-to-noise ratio of MR images was slightly degraded due to the PET insert installed inside the MR bore while the homogeneity was

Evaluation of attenuation correction in cardiac PET using PET/MR.

Science.gov (United States)

Lau, Jeffrey M C; Laforest, R; Sotoudeh, H; Nie, X; Sharma, S; McConathy, J; Novak, E; Priatna, A; Gropler, R J; Woodard, P K

2017-06-01

Simultaneous acquisition Positron emission tomography/magnetic resonance (PET/MR) is a new technology that has potential as a tool both in research and clinical diagnosis. However, cardiac PET acquisition has not yet been validated using MR imaging for attenuation correction (AC). The goal of this study is to evaluate the feasibility of PET imaging using a standard 2-point Dixon volume interpolated breathhold examination (VIBE) MR sequence for AC. Evaluation was performed in both phantom and patient data. A chest phantom containing heart, lungs, and a lesion insert was scanned by both PET/MR and PET/CT. In addition, 30 patients underwent whole-body 18 F-fluorodeoxyglucose PET/CT followed by simultaneous cardiac PET/MR. Phantom study showed 3% reduction of activity values in the myocardium due to the non-inclusion of the phased array coil in the AC. In patient scans, average standardized uptake values (SUVs) obtained by PET/CT and PET/MR showed no significant difference (n = 30, 4.6 ± 3.5 vs 4.7 ± 2.8, P = 0.47). There was excellent per patient correlation between the values acquired by PET/CT and PET/MR (R 2  = 0.97). Myocardial SUVs PET imaging using MR for AC shows excellent correlation with myocardial SUVs obtained by standard PET/CT imaging. The 2-point Dixon VIBE MR technique can be used for AC in simultaneous PET/MR data acquisition.

Ship Roll Damping Control

DEFF Research Database (Denmark)

Perez, Tristan; Blanke, Mogens

2012-01-01

limitations and large variations of the spectral characteristics of wave-induced roll motion. This tutorial paper presents an account of the development of various ship roll motion control systems together with the challenges associated with their design. It discusses the assessment of performance...

Improved Dutch Roll Approximation for Hypersonic Vehicle

Directory of Open Access Journals (Sweden)

Liang-Liang Yin

2014-06-01

Full Text Available An improved dutch roll approximation for hypersonic vehicle is presented. From the new approximations, the dutch roll frequency is shown to be a function of the stability axis yaw stability and the dutch roll damping is mainly effected by the roll damping ratio. In additional, an important parameter called roll-to-yaw ratio is obtained to describe the dutch roll mode. Solution shows that large-roll-to-yaw ratio is the generate character of hypersonic vehicle, which results the large error for the practical approximation. Predictions from the literal approximations derived in this paper are compared with actual numerical values for s example hypersonic vehicle, results show the approximations work well and the error is below 10 %.

Efficient Circulation of Railway Rolling Stock

NARCIS (Netherlands)

Alfieri, A.; Groot, R.; Kroon, L.G.; Schrijver, A.

2006-01-01

Railway rolling stock (locomotives, carriages, and train units) is one of the most significant cost sources for operatorsof passenger trains, both public and private. Rolling stock costsare due to material acquisition, power supply, and material maintenance. The efficient circulation of rolling

Der Einfluß der Ablauforganisation auf die Effizienz von Entscheidungen: Eine empirische Untersuchung am Beispiel von Bilanzanalysen

OpenAIRE

Gemünden, Hans Georg

1987-01-01

Der vorliegende Beitrag widmet sich einem in der Organisationstheorie stark vernachlässigten Problem: der Ablauforganisation von Entscheidungen. Am Beispiel von Bilanzanalysen wird empirisch geprüft, in welcher Weise eine Gliederung des Prozesses nach Verrichtungen oder Objekten die Qualität der Analyse beeinflußt. Hierzu wird ein validiertes Konzept zur Messung der Qualität von Bilanzanalysen entwickelt. Es wird gezeigt, wie man mittels prozeßbegleitender experimenteller Organisationsforschu...

Von Onlineplattformen und mittelalterlichen Märkten

Directory of Open Access Journals (Sweden)

Claudius Gräbner

2017-12-01

Full Text Available Mit der zunehmenden Digitalisierung und Vernetzung ökonomischer Systeme haben plattformbasierte Interaktionsbeziehungen stark an Bedeutung gewonnen. Hier werden zwei oder mehr Nutzungsgruppen durch eine dritte Seite, die Plattform, zusammengebracht. Die Interaktion wird in solchen zweiseitigen Märkten von den Plattformbetreibern kontrolliert. Kreditkartensysteme, Softwaremärkte oder werbefinanzierte Online-Communities stellen typische Beispiele dar. Da die Analyse von zweiseitigen Märkten mit Gleichgewichtsmodellen aufgrund der algebraischen Struktur des Problems in der Regel nicht praktikabel ist, präsentieren wir im vorliegenden Beitrag ein agentenbasiertes Modell, welches in einem kürzlich erschienenen Artikel ausführlicher diskutiert wird. Anhand von illustrativen Beispielen verdeutlichen wir die Implikationen eines agentenbasierten Ansatzes für die Innovationsökonomik im Allgemeinen und das Studium von Technologieentwicklung im Besonderen.

Verbesserung der Symmetrie von Hirnaufnahmen entlang der Sagittalebene

Science.gov (United States)

Ens, Konstantin; Wenzel, Fabian; Fischer, Bernd

Die lokale Symmetrie von Hirnscans entlang der Sagittalebene zu ermitteln und zu modizifieren, ist für eine Reihe neurologischer Anwendungen interessant. Beispielsweise kann der voxelweise Vergleich von rechter und linker Hirnhälfte nur dann Aufschluss über die Lokalisierung von Läsionen geben, wenn durch Transformation ein Hirnscan eine möglichst hohe Symmetrie aufweist. Ein weiteres Anwendungsgebiet ist die Visualisierung von medialen Hirnschnitten, für die die Trennfläche beider Hirnhälfte möglichst eben sein sollte. Diese Arbeit stellt die Entwicklung eines Verfahrens vor, mit dessen Hilfe die Symmetrie von Hirnaufnahmen entlang der Sagittalebene verbessert werden kann. Dies geschieht unter Verwendung von aktiven Konturen, die mit Hilfe einer neuartigen Kostenfunktion gesteuert werden. Experimente am Ende der Arbeit mit strukturellen Kernspinaufnahmen demonstrieren die Leistungsfähigkeit des Verfahrens.

18F-FDG PET and PET/CT in Burkitt's lymphoma

International Nuclear Information System (INIS)

Karantanis, Dimitrios; Durski, Jolanta M.; Lowe, Val J.; Nathan, Mark A.; Mullan, Brian P.; Georgiou, Evangelos; Johnston, Patrick B.; Wiseman, Gregory A.

2010-01-01

Objective: To explore the value of 18 F fluorodeoxy-glucose (FDG) positron emission tomography (PET) in Burkitt's lymphoma. Methods: All Burkitt's lymphoma patients referred for FDG PET or FDG PET/computed tomography (CT) exams at our institution from June 2003 to June 2006 were included. Selected patients were followed and clinical information was reviewed retrospectively. Results from FDG PET-PET/CT, as blindly reviewed by a consensus of two experienced readers, were compared with the status of the disease as determined by other laboratory, clinical and imaging exams and clinical follow-up. FDG PET-PET/CT results were classified as true positive or negative and false positive or negative. The degree of FDG uptake in the positive lesions was semiquantified as maximum standard uptake value (SUVmax). Results: Fifty-seven FDG PET-PET/CT exams were done in 15 patients. Seven exams were done for initial staging, 8 during and 14 after the completion of therapy, and 28 for disease surveillance. For nodal disease FDG PET-PET/CT was true positive in 8, true negative in 47 and false positive in 2 exams (sensitivity 100%, specificity 96%). For extranodal disease FDG PET-PET/CT was true positive in 6, true negative in 48 and false positive in 3 exams (sensitivity 100%, specificity 94%). The mean SUVmax for the positive nodal lesions was 15.7 (range 6.9-21.7, median 18.5) and for extranodal lesions was 14.2 (range 6.2-24.3, median 12.4). Conclusions: FDG PET-PET/CT is sensitive for the detection of viable disease in Burkitt's lymphoma. Affected areas demonstrated high degree of uptake that was reversible upon successful implementation of treatment.

Small-Molecule Organic Photovoltaic Modules Fabricated via Halogen-Free Solvent System with Roll-to-Roll Compatible Scalable Printing Method.

Science.gov (United States)

Heo, Youn-Jung; Jung, Yen-Sook; Hwang, Kyeongil; Kim, Jueng-Eun; Yeo, Jun-Seok; Lee, Sehyun; Jeon, Ye-Jin; Lee, Donmin; Kim, Dong-Yu

2017-11-15

For the first time, the photovoltaic modules composed of small molecule were successfully fabricated by using roll-to-roll compatible printing techniques. In this study, blend films of small molecules, BTR and PC 71 BM were slot-die coated using a halogen-free solvent system. As a result, high efficiencies of 7.46% and 6.56% were achieved from time-consuming solvent vapor annealing (SVA) treatment and roll-to-roll compatible solvent additive approaches, respectively. After successful verification of our roll-to-roll compatible method on small-area devices, we further fabricated large-area photovoltaic modules with a total active area of 10 cm 2 , achieving a power conversion efficiency (PCE) of 4.83%. This demonstration of large-area photovoltaic modules through roll-to-roll compatible printing methods, even based on a halogen-free solvent, suggests the great potential for the industrial-scale production of organic solar cells (OSCs).

PET or PET-CT with cancer screening

International Nuclear Information System (INIS)

Wang Taisong; Zhao Jinhua; Song Jianhua

2007-01-01

At present, cancer screening remains a lot of debate in contemporary medical practice. Many constitutes have done a lot of experiments in cancer screening. The same version is that recommendations and decisions regarding cancer screening should be based on reliable data, not self- approbation. Now, some institutes advocate 18 F-FDG PET or 18 F-FDG PET-CT for cancer screening, here, discussed status quo, potential financial, radiation safety and statistical data in 18 F-FDG PET or 18 F-FDG PET- CT cancer screening. (authors)

PET / MRI vs. PET / CT. Indications Oncology

International Nuclear Information System (INIS)

Oliva González, Juan P.

2016-01-01

Hybrid techniques in Nuclear Medicine is currently a field in full development for diagnosis and treatment of various medical conditions. With the recent advent of PET / MRI much it speculated about whether or not it is superior to PET / CT especially in oncology. The Conference seeks to clarify this situation by dealing issues such as: State of the art technology PET / MRI; Indications Oncology; Some clinical cases. It concludes by explaining the oncological indications of both the real and current situation of the PET / MRI. (author)

An individualized radiation dose escalation trial in non-small cell lung cancer based on FDG-PET imaging

Energy Technology Data Exchange (ETDEWEB)

Wanet, Marie; Goossens, Samuel; Lee, John Aldo; Janssens, Guillaume; Bol, Anne; Geets, Xavier [Universite Catholique de Louvain, Center of Molecular Imaging, Radiotherapy and Oncology (MIRO), Institut de Recherche Experimentale et Clinique, Brussels (Belgium); Delor, Antoine [Cliniques Universitaires Saint-Luc, Department of Radiation Oncology, Brussels (Belgium); Hanin, Francois-Xavier [Cliniques Universitaires Saint-Luc, Department of Nuclear Medicine, Brussels (Belgium); Ghaye, Benoit [Cliniques Universitaires Saint-Luc, Department of Radiology, Brussels (Belgium); Maanen, Aline van [Cliniques Universitaires Saint-Luc, Statistical Support Unit, Cancer Centre, Brussels (Belgium); Remouchamps, Vincent; Clermont, Christian [Clinique et Maternite Sainte Elisabeth, Department of Radiation Oncology, CHU UCL Namur (Belgium)

2017-10-15

late toxicity. (orig.) [German] Ziel der Studie war es, die Anwendbarkeit einer individualisierten Fluordesoxyglukose-Positronenemissionstomographie(FDG-PET)-gefuehrten partiellen Dosissteigerung beim nichtkleinzelligen Lungenkarzinom (NSCLC) zu pruefen und deren Einfluss auf die lokale Tumorkontrolle und Toxizitaet zu beurteilen. Dreizehn Patienten mit NSCLC in Stadium II-III wurden in die Studie einbezogen und erhielten im Rahmen einer Radiochemotherapie eine Dosis von 62,5 Gy in 25 Fraktionen auf das CT-basierte Planungszielvolumen (PTV; primaerer Tumor und betroffene Lymphknoten). Dabei wurde die Fraktionsdosis innerhalb des individuellen PET-basierten PTV (PTV{sub PET}) unter Anwendung einer intensitaetsmodulierten Radiotherapie (IMRT) mit simultan-integriertem Boost (SIB) bis zum Erreichen der vordefinierten Organ-at-risk(OAR)-Grenze erhoeht. In der Nachbeobachtungszeit wurde die Tumorantwort mit wiederholter FDG-PET/Computertomographie ueberprueft. Die fruehe und spaete Toxizitaet wurden erfasst und anhand der Common-Terminology-Criteria-for-Adverse-Events(CTCAE)-Kriterien (Version 4.0) klassifiziert. Das lokale progressionsfreie Ueberleben wurde anhand der Kaplan-Meier-Methode bestimmt. Die Durchschnittsdosis auf das PTV{sub PET} erreichte 89,17 Gy fuer periphere und 75 Gy fuer zentrale Tumoren. Nach einer medianen Nachbeobachtungszeit von 29 Monaten waren 7 Patienten weiterhin am Leben, 6 waren verstorben (4 davon an Fernrezidiven, 2 an einer Toxizitaet fuenften Grades). Bei 2 Patienten trat eine lokale Progression in Verbindung mit weiteren Rezidiven auf. Die lokalen progressionsfreien 1- und 2-Jahres-Ueberlebensraten lagen bei 76,9 % bzw. 52,8 %. Es wurden 3 Faelle akuter Oesophagitiden dritten Grades beobachtet. Zwei Patienten mit zentralen Tumoren entwickelten eine spaete Toxizitaet und verstarben infolge einer schwerwiegenden Haemoptyse. Gemaess diesen Ergebnissen ist fuer Patienten mit NSCLC eine im Rahmen der IMRT angewendete, auf der FDG-PET basierende

Application of PET and PET/CT imaging for cancer screening

International Nuclear Information System (INIS)

Chen Yenkung; Hu Fenglan; Shen Yehyou; Liao, A.C.; Hung, T.Z.; Su, Chentau; Chen Liangkuang

2004-01-01

The aim of this study was to evaluate the potential application of 18F-fluorodeoxyglucose (FDG) Positron Emission Tomography (PET) and PET/CT for cancer screening in asymptomatic individuals. Methods: The subjects consisted of 3631 physical check up examinees (1947 men, 1684 women; mean age ±SD, 52.1±8.2 y) with non-specific medical histories. Whole-body FDG PET (or PET/CT), ultrasound and tumor markers were performed on all patients. Focal hypermetabolic areas with intensities equal to or exceeding the level of FDG uptake in the brain and bladder were considered abnormal and interpreted as neoplasia. Follow-up periods were longer than one year. Results: Among the 3631 FDG PET (including 1687 PET/CT), ultrasound and tumor markers examinations, malignant tumors were discovered in 47 examinees (1.29%). PET findings were true-positive in 38 of the 47 cancers (80.9%). In addition, 32 of the 47 cancers were performed with the PET-CT scan. PET detected cancer lesions in 28 of the 32 examinees. However, the CT detected cancer lesions in only 15 of 32 examinees. Conclusion: The sensitivity of FDG PET in the detection of a wide variety of cancers is high. Most cancer can be detected with FDG PET in a resectable stage. CT of the PET/CT for localization and characteristics of the lesion shows an increased specificity of the PET scan. Using ultrasound and tumor markers may complement the PET scan in cancer screening for hepatic and urologic neoplasms. (authors)

Jacob Stael von Holstein ja palladionism eesti arhitektuuris / Ants Hein

Index Scriptorium Estoniae

Hein, Ants, 1952-

2005-01-01

Sõjaväeinsenerist ja arhitektist Jacob Stael von Holsteinist (1628, Pärnu-1679), tema kavandatud hoonetest ja rollist 17. sajandi II poole arhitektuuris. Fabian von Ferseni Toompeal Lossiplatsil asunud elamust (lammutati 1894) ja Maardu mõisahoonest, Hans von Ferseni Mäo mõisahoonest Järvamaal, Otto Wilhelm von Ferseni majast Toompeal, Axel von Roseni majast Tallinnas Pikk t. 28 (1670-74), Otto Reinhold von Taube majast Tartus (hävinud), J. S. von Holsteini enda hoonetest: majast Tallinnas Toompea 1, Anija mõisahoonest, elamust Riias jm. Bibliograafia lk. 452

Multi-level approach for parametric roll analysis

Science.gov (United States)

Kim, Taeyoung; Kim, Yonghwan

2011-03-01

The present study considers multi-level approach for the analysis of parametric roll phenomena. Three kinds of computation method, GM variation, impulse response function (IRF), and Rankine panel method, are applied for the multi-level approach. IRF and Rankine panel method are based on the weakly nonlinear formulation which includes nonlinear Froude- Krylov and restoring forces. In the computation result of parametric roll occurrence test in regular waves, IRF and Rankine panel method show similar tendency. Although the GM variation approach predicts the occurrence of parametric roll at twice roll natural frequency, its frequency criteria shows a little difference. Nonlinear roll motion in bichromatic wave is also considered in this study. To prove the unstable roll motion in bichromatic waves, theoretical and numerical approaches are applied. The occurrence of parametric roll is theoretically examined by introducing the quasi-periodic Mathieu equation. Instability criteria are well predicted from stability analysis in theoretical approach. From the Fourier analysis, it has been verified that difference-frequency effects create the unstable roll motion. The occurrence of unstable roll motion in bichromatic wave is also observed in the experiment.

Influence of experience and qualification on PET-based target volume delineation. When there is no expert - ask your colleague

Energy Technology Data Exchange (ETDEWEB)

Doll, C.; Grosu, A.L.; Nestle, U. [University Medical Center Freiburg, Radiation Oncology Department, Freiburg/Breisgau (Germany); Duncker-Rohr, V. [University Medical Center Freiburg, Radiation Oncology Department, Freiburg/Breisgau (Germany); Ortenau Clinical Center Offenburg, Radiation Oncology Department, Offenburg (Germany); Ruecker, G. [University of Freiburg, Institute of Medical Biometry und Medical Informatics, Freiburg (Germany); Mix, M. [University Medical Center Freiburg, Nuclear Medicine Department, Freiburg (Germany); MacManus, M. [University of Melbourne, The Sir Peter MacCallum Department of Oncology, Melbourne (Australia); Ruysscher, D. de [University Hospital Leuven/KU Leuven, Department of Radiation Oncology, Leuven (Belgium); Vogel, W. [Antoni van Leeuwenhoek Hospital, Department of Nuclear Medicine, The Netherlands Cancer Institute, Amsterdam (Netherlands); Eriksen, J.G. [Odense University Hospital, Department of Oncology, Odense (Denmark); Oyen, W. [Radboud University Nijmegen Medical Center, Department of Nuclear Medicine, Nijmegen (Netherlands); Weber, W. [University Medical Center Freiburg, Nuclear Medicine Department, Freiburg (Germany); Memorial Sloan-Kettering Cancer Center, Department of Radiology/Molecular Imaging and Therapy Service, New York (United States)

2014-06-15

Zielvolumendefinition bei der Bestrahlungsplanung verwendet. Im Gegensatz zur automatischen Konturierung wird die visuell-manuellen Konturierung nur unzureichend beforscht. Die vorliegende Studie untersucht den Einfluss von Erfahrung und Qualifikation auf die manuelle Konturierung. Insgesamt 44 internationale interdisziplinaere Untersucher konturierten jeweils ein [{sup 18}F]Fluordesoxyglukose(FDG)-PET-basiertes makroskopisches Tumorvolumen (''gross tumor volume'', GTV) anhand desselben PET-/CT-Scans eines Patienten mit Lungenkarzinom. Die Untersucher waren sog. Experten (E; n = 3), erfahrene interdisziplinaere Zweierteams aus Strahlentherapeut und Nuklearmediziner(EP; n = 9), einzelne Fachaerzte des Behandlungsfelds (SFS; n = 13) und Studenten (S; n = 10). Ferner wurden 5 automatische Konturierungsmethoden (AM) ebenfalls angewendet. Die Groesse der Volumina und die Konkordanzindizes innerhalb der Gruppen (pCI) und relativ zu den Experten (eCI) wurden berechnet. E (pCI = 0,67) und EP (pCI = 0,53) zeigten eine signifikant hoehere Uebereinstimmung innerhalb der Gruppen im Vergleich zu SFS (pCI = 0,43, p = 0,03 und p = 0,006). Relativ zu E zeigte EP (eCI = 0,55) eine bessere Uebereinstimmung verglichen mit SFS (eCI = 0,49) oder S (eCI = 0,47). Die Intermethodenvariabilitaet von AM (pCI = 0,44) war aehnlich der von SFS und S, zeigte aber eine geringere Uebereinstimmung mit E (eCI = 0,35). Die Ergebnisse legen nahe, dass interdisziplinaere Kooperation fuer konsistentes Konturieren vorteilhaft sein kann. Eine gemeinsame Konturierung durch einen Strahlentherapeuten und einen Nuklearmediziner zeigte einen beachtlichen Konsens und eine bessere Uebereinstimmung mit den Experten im Vergleich zu anderen Fachaerzten. Eine relevante Intermethodenvariabilitaet der automatischen Algorithmen verdeutlicht die Notwendigkeit weiterer Standardisierung und Optimierung auch auf diesem Gebiet. (orig.)

Do carotid MR surface coils affect PET quantification in PET/MR imaging?

International Nuclear Information System (INIS)

Willemink, Martin J; Eldib, Mootaz; Leiner, Tim; Fayad, Zahi A; Mani, Venkatesh

2015-01-01

To evaluate the effect of surface coils for carotid MR imaging on PET quantification in a clinical simultaneous whole-body PET/MR scanner. A cylindrical phantom was filled with a homogeneous 2L water-FDG mixture at a starting dose of 301.2MBq. Clinical PET/MR and PET/CT systems were used to acquire PET-data without a coil (reference standard) and with two carotid MRI coils (Siemens Special Purpose 8-Channel and Machnet 4-Channel Phased Array). PET-signal attenuation was evaluated with Osirix using 51 (PET/MR) and 37 (PET/CT) circular ROIs. Mean and maximum standardized uptake values (SUVs) were quantified for each ROI. Furthermore, SUVs of PET/MR and PET/CT were compared. For validation, a patient was scanned with an injected dose of 407.7MBq on both a PET/CT and a PET/MR system without a coil and with both coils. PET/MR underestimations were -2.2% (Siemens) and -7.8% (Machnet) for SUVmean, and -1.2% (Siemens) and -3.3% (Machnet) for SUVmax, respectively. For PET/CT, underestimations were -1.3% (Siemens) and -1.4% (Machnet) for SUVmean and -0.5% (both Siemens and Machnet) for SUVmax, respectively using no coil data as reference. Except for PET/CT SUVmax values all differences were significant. SUVs differed significantly between PET/MR and PET/CT with SUVmean values of 0.51-0.55 for PET/MR and 0.68-0.69 for PET/CT, respectively. The patient examination showed that median SUVmean values measured in the carotid arteries decreased from 0.97 without a coil to 0.96 (Siemens) and 0.88 (Machnet). Carotid surface coils do affect attenuation correction in both PET/MR and PET/CT imaging. Furthermore, SUVs differed significantly between PET/MR and PET/CT.

Preorganization of Nanostructured Inks for Roll-to-Roll-Coated Polymer Solar Cells

DEFF Research Database (Denmark)

Krebs, Frederik C; Senkovskyy, Volodymyr; Kiriy, Anton

2010-01-01

, a preorganized ink was obtained that was used to make polymer solar cell modules in a full roll-to-roll coating and printing process operating in ambient air. The polymer solar cells were thus prepared by a mixture of slot die and flat-bed screen printing. Various polymer solar cell modules were prepared ranging...

Development of a fluidized-bed method for on-line evaluation of radiotracers in vitro; Entwicklung einer Fliessbettechnik zur Bewertung von Radiopharmaka an Zellkulturen

Energy Technology Data Exchange (ETDEWEB)

Noll, T.

1999-05-01

This study presents the development of a continuously operating fluidized-bed bioreactor for on-line evaluation of radiotracers in vitro, which combines tissue-like three-dimensional cell cultivation in open porous microcarriers with a technique for on-line radioactivity detection. The long time stability of steady-state permits a large number of experiments using the same culture. All relevant parameters (O{sub 2}, pH, T, etc.) can be adjusted according to the experimental requirements. The flux of the circulating medium can be adapted to the blood flow of the corresponding organism, while the input function of the radiotracer is freely adjustable for simulation of in vivo conditions. Sampling and examination of the immobilized cells care possible at any time. Using this system, the kinetics of 2-[{sup 18}F]fluoro-2-deoxyglucose (FDG) in human glioma cells (86HG39) were studied and it was shown that the dependence of the lumped constant (LC) for FDG on the medium glucose concentration is similar to that obtained in the rat brain. For normoglycemic concentrations the LC was determined to be in the range of 0.7, while in hypoglycemia it increased progressively up to a value of 1.22 at a glucose concentration of 3 mM. The rate constants in the three compartment model were found to be similar to those obtained in vivo using PET; indicating the validity of the system for tracer evaluation. Furthermore the kinetics of both diastereomeric forms of 4-[{sup 18}F]fluoro-proline was investigated and found that both diastereomeres were not metabolized and reached an identical intracellular steady state concentration. The trans-form was transported three times faster than the cis-diastereomere, indicated by the rate constants. (orig.) [German] Diese Arbeit beschreibt die Entwicklung eines kontinuierlich betriebenen Wirbelschichtreaktors zur on-line Bewertung von Radiotracern an Zellkulturen. Der Bioreaktor kombiniert eine gewebeaehnliche, dreidimensionale Zellkultivierung in

Self-Aligned Metal Electrodes in Fully Roll-to-Roll Processed Organic Transistors

Directory of Open Access Journals (Sweden)

Marja Vilkman

2016-01-01

Full Text Available We demonstrate the production of organic bottom gate transistors with self-aligned electrodes, using only continuous roll-to-roll (R2R techniques. The self-alignment allows accurate <5 µm layer-to-layer registration, which is usually a challenge in high-speed R2R environments as the standard registration methods are limited to the millimeter range—or, at best, to tens of µm if online cameras and automatic web control are utilized. The improved registration enables minimizing the overlap between the source/drain electrodes and the gate electrode, which is essential for minimizing the parasitic capacitance. The complete process is a combination of several techniques, including evaporation, reverse gravure, flexography, lift-off, UV exposure and development methods—all transferred to a continuous R2R pilot line. Altogether, approximately 80 meters of devices consisting of thousands of transistors were manufactured in a roll-to-roll fashion. Finally, a cost analysis is presented in order to ascertain the main costs and to predict whether the process would be feasible for the industrial production of organic transistors.

Electronic Resource Management System. Vernetzung von Lizenzinformationen

Directory of Open Access Journals (Sweden)

Michaela Selbach

2014-12-01

Full Text Available In den letzten zehn Jahren spielen elektronische Ressourcen im Bereich der Erwerbung eine zunehmend wichtige Rolle: Eindeutig lässt sich hier ein Wandel in den Bibliotheken (fort vom reinen Printbestand zu immer größeren E-Only-Beständen feststellen. Die stetig wachsende Menge an E-Ressourcen und deren Heterogenität stellt Bibliotheken vor die Herausforderung, die E-Ressourcen effizient zu verwalten. Nicht nur Bibliotheken, sondern auch verhandlungsführende Institutionen von Konsortial- und Allianzlizenzen benötigen ein geeignetes Instrument zur Verwaltung von Lizenzinformationen, welches den komplexen Anforderungen moderner E-Ressourcen gerecht wird. Die Deutsche Forschungsgemeinschaft (DFG unterstützt ein Projekt des Hochschulbibliothekszentrums des Landes Nordrhein-Westfalen (hbz, der Universitätsbibliothek Freiburg, der Verbundzentrale des Gemeinsamen Bibliotheksverbundes (GBV und der Universitätsbibliothek Frankfurt, in dem ein bundesweit verfügbares Electronic Ressource Managementsystem (ERMS aufgebaut werden soll. Ein solches ERMS soll auf Basis einer zentralen Knowledge Base eine einheitliche Nutzung von Daten zur Lizenzverwaltung elektronischer Ressourcen auf lokaler, regionaler und nationaler Ebene ermöglichen. Statistische Auswertungen, Rechteverwaltung für alle angeschlossenen Bibliotheken, kooperative Datenpflege sowie ein über standardisierte Schnittstellen geführter Datenaustausch stehen bei der Erarbeitung der Anforderungen ebenso im Fokus wie die Entwicklung eines Daten- und Funktionsmodells. In the last few years the importance of electronic resources in library acquisitions has increased significantly. There has been a shift from mere print holdings to both e- and print combinations and even e-only subscriptions. This shift poses a double challenge for libraries: On the one hand they have to provide their e-resource collections to library users in an appealing way, on the other hand they have to manage these

Evaluation of the PET component of simultaneous [18F]choline PET/MRI in prostate cancer: comparison with [18F]choline PET/CT

International Nuclear Information System (INIS)

Wetter, Axel; Lipponer, Christine; Nensa, Felix; Altenbernd, Jens-Christian; Schlosser, Thomas; Lauenstein, Thomas; Heusch, Philipp; Ruebben, Herbert; Bockisch, Andreas; Poeppel, Thorsten; Nagarajah, James

2014-01-01

The aim of this study was to evaluate the positron emission tomography (PET) component of [ 18 F]choline PET/MRI and compare it with the PET component of [ 18 F]choline PET/CT in patients with histologically proven prostate cancer and suspected recurrent prostate cancer. Thirty-six patients were examined with simultaneous [ 18 F]choline PET/MRI following combined [ 18 F]choline PET/CT. Fifty-eight PET-positive lesions in PET/CT and PET/MRI were evaluated by measuring the maximum and mean standardized uptake values (SUV max and SUV mean ) using volume of interest (VOI) analysis. A scoring system was applied to determine the quality of the PET images of both PET/CT and PET/MRI. Agreement between PET/CT and PET/MRI regarding SUV max and SUV mean was tested using Pearson's product-moment correlation and Bland-Altman analysis. All PET-positive lesions that were visible on PET/CT were also detectable on PET/MRI. The quality of the PET images was comparable in both groups. Median SUV max and SUV mean of all lesions were significantly lower in PET/MRI than in PET/CT (5.2 vs 6.1, p max of PET/CT and PET/MRI (R = 0.86, p mean of PET/CT and PET/MRI (R = 0.81, p max of PET/CT vs PET/MRI and -1.12 to +2.23 between SUV mean of PET/CT vs PET/MRI. PET image quality of PET/MRI was comparable to that of PET/CT. A highly significant correlation between SUV max and SUV mean was found. Both SUV max and SUV mean were significantly lower in [ 18 F]choline PET/MRI than in [ 18 F]choline PET/CT. Differences of SUV max and SUV mean might be caused by different techniques of attenuation correction. Furthermore, differences in biodistribution and biokinetics of [ 18 F]choline between the subsequent examinations and in the respective organ systems have to be taken into account. (orig.)

Roll-to-Roll fabrication of large area functional organic materials

DEFF Research Database (Denmark)

Søndergaard, Roar R.; Hösel, Markus; Krebs, Frederik C

2013-01-01

With the prospect of extremely fast manufacture of very low cost devices, organic electronics prepared by thin film processing techniques that are compatible with roll-to-roll (R2R) methods are presently receiving an increasing interest. Several technologies using organic thin films...... research fields such as organic photovoltaics, organic thin film transistors, light-emitting diodes, polymer electrolyte membrane fuel cells, and electrochromic devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 000: 000–000, 2012...

Perovskite solar cells for roll-to-roll fabrication

Directory of Open Access Journals (Sweden)

Uddin Ashraf

2017-01-01

Full Text Available Perovskite solar cell (PSCs is considered as the game changer in emerging photovoltaics technology. The highest certified efficiency is 22% with high temperature processed (∼500 °C TiO2 based electron transport layer (ETL. High temperature process is a rudimentary hindrance towards roll-to-roll processing of PSCs on flexible substrates. Low temperature solution process (<150 °C ZnO based ETL is one of the most promising candidate for large scale roll-to-roll fabrication of cells as it has nearly identical electron affinity (4.2 eV of TiO2. The mixed organic perovskite (MA0.6FA0.4PbI3 devices with Al doped ZnO (AZO ETL demonstrate average cell efficiency over 16%, which is the highest ever reported efficiency for this device configuration. The energy level alignment and related interfacial charge transport dynamics at the interface of ZnO and perovskite films and the adjacent charge transport layers are investigated. Significantly improved device stability, hysteresis free device photocurrent have been observed in MA0.6FA0.4PbI3 cells. A systematic electrochemical impedance spectroscopy, frequency dependent capacitance spectra, surface morphology and topography characterization have been conducted to understand the role of interfacial electronic properties between perovskite and neighbouring layers in perovskite device. A standardized degradation study, interfacial electronic property and capacitive spectra analysis of aged device, have been measured to understand the enhanced device stability in mixed MA0.6FA0.4PbI3 cells. Slow perovskite material decomposition rate and augmented device lifetime with AZO based devices have been found to be correlated with the more hydrophobic and acidic nature of AZO surface compared to pristine ZnO film.

Roll-to-roll coated PBI membranes for high temperature PEM fuel cells

DEFF Research Database (Denmark)

Steenberg, Thomas; Hjuler, Hans Aage; Terkelsen, Carina

2012-01-01

We employed roll-to-roll coating in the preparation of 40 μm thick poly[2,2′(m-phenylene)-5,5′bibenzimidazole] (PBI) films for fuel cells using both knife-coating (KC) and slot-die (SD) coating. The films were coated directly from a 9% (w/w) solution of PBI in dimethylacetamide onto a sacrificial...

Troll, a Language for specifying Dice-rolls

DEFF Research Database (Denmark)

Mogensen, Torben Ægidius

2009-01-01

Dice are used in many games, and often in fairly complex ways that make it difficult to unambiguously describe the dice-roll mechanism in plain language. Many role-playing games, such as Dungeons & Dragons, use a formalised notation for some instances of dice-rolls. This notation, once explained...... natural language to describe rolls. Even Dungeons & Dragons use formal notation only for some of the dice-roll methods used in the game. Hence, a more complete notation is in this paper proposed, and a tool for pseudo-random rolls and (nearly) exact probability calculations is described. The notation...... is called "Troll", combining the initial of the Danish word for dice ("terninger") with the English word "roll". It is a development of the language Roll described in an earlier paper. The present paper describes the most important features of Troll and its implementation....

[Principles of PET].

Science.gov (United States)

Beuthien-Baumann, B

2018-05-01

Positron emission tomography (PET) is a procedure in nuclear medicine, which is applied predominantly in oncological diagnostics. In the form of modern hybrid machines, such as PET computed tomography (PET/CT) and PET magnetic resonance imaging (PET/MRI) it has found wide acceptance and availability. The PET procedure is more than just another imaging technique, but a functional method with the capability for quantification in addition to the distribution pattern of the radiopharmaceutical, the results of which are used for therapeutic decisions. A profound knowledge of the principles of PET including the correct indications, patient preparation, and possible artifacts is mandatory for the correct interpretation of PET results.

Evaluation of Dixon Sequence on Hybrid PET/MR Compared with Contrast-Enhanced PET/CT for PET-Positive Lesions

International Nuclear Information System (INIS)

Jeong, Ju Hye; Cho, Ihn Ho; Kong, Eun Jung; Chun, Kyung Ah

2014-01-01

Hybrid positron emission tomography and magnetic resonance (PET/MR) imaging performs a two-point Dixon MR sequence for attenuation correction. However, MR data in hybrid PET/MR should provide anatomic and morphologic information as well as an attenuation map. We evaluated the Dixon sequence of hybrid PET/MR for anatomic correlation of PET-positive lesions compared with contrast-enhanced PET/computed tomography (CT) in patients with oncologic diseases. Twelve patients underwent a single injection, dual imaging protocol. PET/CT was performed with an intravenous contrast agent (85±13 min after 18 F-FDG injection of 403± 45 MBq) and then (125±19 min after injection) PET/MR was performed. Attenuation correction and anatomic allocation of PET were performed using contrast-enhanced CT for PET/CT and Dixon MR sequence for hybrid PET/MR. The Dixon MR sequence and contrast-enhanced CT were compared for anatomic correlation of PET-positive lesions (scoring scale ranging from 0 to 3 for visual ratings). Additionally, standardized uptake values (SUVs) for the detected lesions were assessed for quantitative comparison. Both hybrid PET/MR and contrast-enhanced PET/CT identified 55 lesions with increased FDG uptake in ten patients. In total, 28 lymph nodes, 11 bone lesions, 3 dermal nodules, 3 pleural thickening lesions, 2 thyroid nodules, 1 pancreas, 1 liver, 1 ovary, 1 uterus, 1 breast, 1 soft tissue and 2 lung lesions were present. The best performance was observed for anatomic correlation of PET findings by the contrast-enhanced CT scans (contrast-enhanced CT, 2.64± 0.70; in-phase, 1.29±1.01; opposed-phase, 1.29±1.15; water-weighted, 1.71±1.07; fat weighted, 0.56±1.03). A significant difference was observed between the scores obtained from the contrast-enhanced CT and all four coregistered Dixon MR images. Quantitative evaluation revealed a high correlation between the SUVs measured with hybrid PET/MR (SUVmean, 2.63±1.62; SUVmax, 4.30±2.88) and contrast-enhanced PET

Evaluation of Dixon Sequence on Hybrid PET/MR Compared with Contrast-Enhanced PET/CT for PET-Positive Lesions

Energy Technology Data Exchange (ETDEWEB)

Jeong, Ju Hye; Cho, Ihn Ho; Kong, Eun Jung; Chun, Kyung Ah [Yeungnam Univ. Hospital, Daegu (Korea, Republic of)

2014-03-15

Hybrid positron emission tomography and magnetic resonance (PET/MR) imaging performs a two-point Dixon MR sequence for attenuation correction. However, MR data in hybrid PET/MR should provide anatomic and morphologic information as well as an attenuation map. We evaluated the Dixon sequence of hybrid PET/MR for anatomic correlation of PET-positive lesions compared with contrast-enhanced PET/computed tomography (CT) in patients with oncologic diseases. Twelve patients underwent a single injection, dual imaging protocol. PET/CT was performed with an intravenous contrast agent (85±13 min after {sup 18}F-FDG injection of 403± 45 MBq) and then (125±19 min after injection) PET/MR was performed. Attenuation correction and anatomic allocation of PET were performed using contrast-enhanced CT for PET/CT and Dixon MR sequence for hybrid PET/MR. The Dixon MR sequence and contrast-enhanced CT were compared for anatomic correlation of PET-positive lesions (scoring scale ranging from 0 to 3 for visual ratings). Additionally, standardized uptake values (SUVs) for the detected lesions were assessed for quantitative comparison. Both hybrid PET/MR and contrast-enhanced PET/CT identified 55 lesions with increased FDG uptake in ten patients. In total, 28 lymph nodes, 11 bone lesions, 3 dermal nodules, 3 pleural thickening lesions, 2 thyroid nodules, 1 pancreas, 1 liver, 1 ovary, 1 uterus, 1 breast, 1 soft tissue and 2 lung lesions were present. The best performance was observed for anatomic correlation of PET findings by the contrast-enhanced CT scans (contrast-enhanced CT, 2.64± 0.70; in-phase, 1.29±1.01; opposed-phase, 1.29±1.15; water-weighted, 1.71±1.07; fat weighted, 0.56±1.03). A significant difference was observed between the scores obtained from the contrast-enhanced CT and all four coregistered Dixon MR images. Quantitative evaluation revealed a high correlation between the SUVs measured with hybrid PET/MR (SUVmean, 2.63±1.62; SUVmax, 4.30±2.88) and contrast

Autonomous Supervision and Control of Parametric Roll Resonance

DEFF Research Database (Denmark)

Galeazzi, Roberto

therefore two objectives. The first is to develop methods for detection of the inception of parametric roll resonance. The second is to develop control strategies to stabilize the motion after parametric roll has started. Stabilisation of parametric roll resonance points to two possible courses of action...... strategies are then combined to stabilise parametric roll resonance within few roll cycles. Limitations on the maximum stabilisable roll angle are analysed and linked to the ii slew rate saturation and hydrodynamic stall characteristics of the fin stabilisers. The study on maximum stabilisable roll angle...... leads to the requirements for early detection. Two novel detectors are proposed, which work within a shorttime prediction horizon, and issue early warnings of parametric roll inception within few roll cycles from its onset. The main idea behind these detection schemes is that of exploiting the link...

New perspectives on constant-roll inflation

Science.gov (United States)

Cicciarella, Francesco; Mabillard, Joel; Pieroni, Mauro

2018-01-01

We study constant-roll inflation using the β-function formalism. We show that the constant rate of the inflaton roll is translated into a first order differential equation for the β-function which can be solved easily. The solutions to this equation correspond to the usual constant-roll models. We then construct, by perturbing these exact solutions, more general classes of models that satisfy the constant-roll equation asymptotically. In the case of an asymptotic power law solution, these corrections naturally provide an end to the inflationary phase. Interestingly, while from a theoretical point of view (in particular in terms of the holographic interpretation) these models are intrinsically different from standard slow-roll inflation, they may have phenomenological predictions in good agreement with present cosmological data.

A note on derivations of Murray–von Neumann algebras

Science.gov (United States)

Kadison, Richard V.; Liu, Zhe

2014-01-01

A Murray–von Neumann algebra is the algebra of operators affiliated with a finite von Neumann algebra. In this article, we first present a brief introduction to the theory of derivations of operator algebras from both the physical and mathematical points of view. We then describe our recent work on derivations of Murray–von Neumann algebras. We show that the “extended derivations” of a Murray–von Neumann algebra, those that map the associated finite von Neumann algebra into itself, are inner. In particular, we prove that the only derivation that maps a Murray–von Neumann algebra associated with a factor of type II1 into that factor is 0. Those results are extensions of Singer’s seminal result answering a question of Kaplansky, as applied to von Neumann algebras: The algebra may be noncommutative and may even contain unbounded elements. PMID:24469831

A note on derivations of Murray-von Neumann algebras.

Science.gov (United States)

Kadison, Richard V; Liu, Zhe

2014-02-11

A Murray-von Neumann algebra is the algebra of operators affiliated with a finite von Neumann algebra. In this article, we first present a brief introduction to the theory of derivations of operator algebras from both the physical and mathematical points of view. We then describe our recent work on derivations of Murray-von Neumann algebras. We show that the "extended derivations" of a Murray-von Neumann algebra, those that map the associated finite von Neumann algebra into itself, are inner. In particular, we prove that the only derivation that maps a Murray-von Neumann algebra associated with a factor of type II1 into that factor is 0. Those results are extensions of Singer's seminal result answering a question of Kaplansky, as applied to von Neumann algebras: The algebra may be noncommutative and may even contain unbounded elements.

Pancreatic neuroendocrine neoplasms; Neuroendokrine Neoplasien des Pankreas

Energy Technology Data Exchange (ETDEWEB)

Beiderwellen, K.; Lauenstein, T.C. [Universitaetsklinikum Essen, Institut fuer Diagnostische und Interventionelle Radiologie und Neuroradiologie, Essen (Germany); Sabet, A.; Poeppel, T.D. [Universitaetsklinikum Essen, Klinik fuer Nuklearmedizin, Essen (Germany); Lahner, H. [Universitaetsklinikum Essen, Klinik fuer Endokrinologie und Stoffwechselerkrankungen, Essen (Germany)

2016-04-15

Pancreatic neuroendocrine neoplasms (NEN) account for 1-2 % of all pancreatic neoplasms and represent a rare differential diagnosis. While some pancreatic NEN are hormonally active and exhibit endocrine activity associated with characteristic symptoms, the majority are hormonally inactive. Imaging techniques such as ultrasound, computed tomography (CT), magnetic resonance imaging (MRI) and positron emission tomography (PET) or as combined PET/CT play a crucial role in the initial diagnosis, therapy planning and control. Endoscopic ultrasound (EUS) and multiphase CT represent the reference methods for localization of the primary pancreatic tumor. Particularly in the evaluation of small liver lesions MRI is the method of choice. Somatostatin receptor scintigraphy and somatostatin receptor PET/CT are of particular value for whole body staging and special aspects of further therapy planning. (orig.) [German] Neuroendokrine Neoplasien (NEN) des Pankreas stellen mit einem Anteil von 1-2 % aller pankreatischen Tumoren eine seltene Differenzialdiagnose dar. Ein Teil der Tumoren ist hormonell aktiv und faellt klinisch durch charakteristische Symptome auf, wohingegen der ueberwiegende Anteil hormonell inaktiv ist. Bildgebende Verfahren wie Sonographie, Computertomographie (CT), Magnetresonanztomographie (MRT) und nicht zuletzt Positronenemissionstomographie (PET oder kombiniert als PET/CT) spielen eine zentrale Rolle fuer Erstdiagnose, Therapieplanung und -kontrolle. Die Endosonographie und die multiphasische CT stellen die Referenzmethoden zur Lokalisation des Primaertumors dar. Fuer die Differenzierung insbesondere kleiner Leberlaesionen bietet die MRT die hoechste Aussagekraft. Fuer das Ganzkoerperstaging und bestimmte Aspekte der Therapieplanung lassen sich die Somatostatinrezeptorszintigraphie und v. a. die Somatostatinrezeptor-PET/CT heranziehen. (orig.)

Analyse der pharmazeutischen Versorgungssituation von Patienten mit Psoriasis-Arthritis auf Basis von Routinedaten der Gesetzlichen Krankenversicherung.

Science.gov (United States)

Sondermann, Wiebke; Ventzke, Julia; Matusiewicz, David; Körber, Andreas

2018-03-01

Die Psoriasis-Arthritis (PsA) gehört zu den chronisch entzündlichen Gelenkerkrankungen. Trotz zahlreicher versorgungswissenschaftlicher Studien in Deutschland liegen zur pharmazeutischen Versorgungssituation von PsA-Patienten bisher kaum aktuelle Ergebnisse vor. Mit Hilfe einer systematischen Literaturrecherche sowie anhand von Routinedaten der Allgemeinen Ortskrankenkasse (AOK) Rheinland/Hamburg wird ein aktueller Überblick über die pharmazeutische Versorgung von PsA-Patienten in Deutschland gegeben. Selektiert wurden Versicherte aus dem ambulanten und stationären Bereich, die im 1. und 2. Quartal des Jahres 2014 die gesicherte Abrechnungsdiagnose Psoriasis-Arthritis L40.5+ aufwiesen. Anschließend wurden auf Basis dieser "vorab definierten" Kohorte die Arzneimitteldaten für 5 Jahre (01.01.2010-31.12.2014) abgerufen. Es konnten insgesamt n  =  3205 Versicherte (45 % männlich, 55 % weiblich) der AOK Rheinland/Hamburg mit einer gesicherten PsA-Diagnose selektiert werden. Das Durchschnittsalter betrug 58,9 Jahre. 53,7 % der PsA-Patienten wurden mit systemischen PsA-relevanten Arzneimitteln versorgt. Nichtsteroidale Antirheumatika (NSAR) wurden am häufigsten verordnet, gefolgt von systemischen Glucocorticoiden. Von den selektierten PsA-Patienten, die eine Systemtherapie erhielten, wurden 72,1 % mittels einer Disease-modifying-antirheumatic-Drug (DMARD)-Monotherapie behandelt, gefolgt von der Kombinationstherapie aus DMARDs und Biologika (20,9 %). Die pharmakologische Therapie der PsA muss eine Gewährleistung zwischen adäquater Versorgung der PsA mit Verhinderung der Krankheitsprogression und ökonomischer Verantwortung darstellen. © 2018 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

Lung PET scan

Science.gov (United States)

... Chest PET scan; Lung positron emission tomography; PET - chest; PET - lung; PET - tumor imaging; ... Grainger & Allison's Diagnostic Radiology: A Textbook of Medical Imaging . 6th ed. Philadelphia, ...

Calculation and experimental technique of determination of rolling procedure for cold-rolling tube mills

International Nuclear Information System (INIS)

Igoshin, V.F.; Aleshin, V.A.; Khoroshikh, Yu.G.; Bogatov, A.A.; Mizhiritskij, O.I.

1983-01-01

Calculation and experimental technique of determination of tube cold rolling procedure has been developed. Rolling procedure based on the usage of regression equation epsilon=1.24 psi, where psi is the relative reduction of area, delta-permissible reduction during rolling, has been tested on 08Kh18N10T steel. The effect of tube geometry, tool calibration parameters, lubrication conditions etc. on metal deformability in taking into account experimentally. The use of the technique proposed has allowed to shorten the time of mastering of the production of tubes from different steels

Neurocognition and PET: strategies for data analysis in activation studies on working memory; Neurokognition und PET: datenanalytische Strategien bei Aktivierungsstudien zum Arbeitsgedaechtnis

Energy Technology Data Exchange (ETDEWEB)

Hautzel, H.; Mottaghy, F.M.; Schmidt, D.; Mueller, H.-W.; Krause, B. J. [Klinik fuer Nuklearmedizin (KME), Forschungszentrum Juelich (Germany); Nuklearmedizinische Klinik, Heinrich-Heine-Universitaet Duesseldorf (Germany)

2003-10-01

Aim: In cognitive neuroscience regional cerebral blood flow (rCBF) imaging with positron-emission-tomography (PET) is a powerful tool to characterize different aspects of cognitive processes by using different data analysis approaches. By use of an n-back verbal working memory task (varied from 0- to 3-back) we present cognitive subtraction analysis as basic strategy as well as parametric and covariance analyses and discuss the results. Methods: Correlation analyses were performed using the individual performance rate as an external covariate, computing inter-regional correlations, an as network analysis applying structural equation modelling to evaluate the effective connectivity between the involved brain regions. Results: Subtraction analyses revealed a fronto-parietal neuronal network also including the anterior cingulate cortex and the cerebellum. With higher memory load the parametric analysis evidenced linear rCBF increases in prefrontal, pre-motor and inferior parietal areas including the precuneus as well as in the anterior cingulate cortex. The rCBF correlation with the individual performance as external covariate depicted negative correlations in bilateral prefrontal and inferior parietal regions, in the precuneus and the anterior cingulate cortex. The network analysis demonstrated mainly occipito-frontally directed interactions which were predominantly left-hemispheric. Additionally, strong linkages were found between extrastriate and parietal regions as well as within the parietal cortex. Conclusion: The data analysis approaches presented here contribute to an extended and more elaborated understanding of cognitive processes and their different sub-aspects. (orig.) [German] Ziel, Methoden: Im Bereich der neurokognitiven Aktivierungsstudien mit Messung des regionalen zerebralen Blutflusses (rCBF) mit PET koennen durch Anwendung verschiedener Datenanalysestrategien unterschiedliche Aspekte eines kognitiven Prozesses charakterisiert werden. Unter

Enhancing roll stability of heavy vehicle by LQR active anti-roll bar control using electronic servo-valve hydraulic actuators

Science.gov (United States)

Vu, Van Tan; Sename, Olivier; Dugard, Luc; Gaspar, Peter

2017-09-01

Rollover of heavy vehicle is an important road safety problem world-wide. Although rollovers are relatively rare events, they are usually deadly accidents when they occur. The roll stability loss is the main cause of rollover accidents in which heavy vehicles are involved. In order to improve the roll stability, most of modern heavy vehicles are equipped with passive anti-roll bars to reduce roll motion during cornering or riding on uneven roads. However these may be not sufficient to overcome critical situations. This paper introduces the active anti-roll bars made of four electronic servo-valve hydraulic actuators, which are modelled and integrated in a yaw-roll model of a single unit heavy vehicle. The control signal is the current entering the electronic servo-valve and the output is the force generated by the hydraulic actuator. The active control design is achieved solving a linear optimal control problem based on the linear quadratic regulator (LQR) approach. A comparison of several LQR controllers is provided to allow for tackling the considered multi-objective problems. Simulation results in frequency and time domains show that the use of two active anti-roll bars (front and rear axles) drastically improves the roll stability of the single unit heavy vehicle compared with the passive anti-roll bar.

Fluidized-bed gasification of biomass: Conversion of fine carabon particles in the freeboard; Biomassevergasung in der Wirbelschicht: Umsatz von feinen Kohlenstoffpartikeln im Freeboard

Energy Technology Data Exchange (ETDEWEB)

Miccio, F [Ist. Ricerche sulla Combustione-CNR, Napoli (Italy); Moersch, O; Spliethoff, H; Hein, K R.G. [Stuttgart Univ. (Germany). Inst. fuer Verfahrenstechnik und Dampfkesselwesen

1998-09-01

The conversion of carbon particles in gasification processes was investigated in a fluidized-bed reactor of the Institute of Chemical Engineering and Steam Boiler Technology of Stuttgart University. This reactor is heated electrically to process temperature, and freeboard coal particles can be sampled using an isokinetic probe. The fuel used in the experiments consisted of beech wood chips. The temperature and air rating, i.e. the main parameters of the process, were varied in order to investigate their influence on product gas quality and carbon conversion. The conversion rate is influenced to a significant extent by grain disintegration and discharge of carbon particles. In gasification conditions, a further conversion process takes place in the freeboard. (orig.) [Deutsch] In dieser Arbeit wird die Umsetzung von Kohlenstoffpartikeln unter Vergasungsbedingungen untersucht. Die Versuche wurden an einem Wirbelschichtreaktor des Instituts fuer Verfahrenstechnik und Dampfkesselwesen der Universitaet Stuttgart durchgefuehrt. Dieser Reaktor wird elektrisch auf Prozesstemperatur beheizt. Mit Hilfe einer isokinetischen Sonde koennen Proben von Kohlenstoffpartikeln im Freeboard genommen werden. Als Brennstoff wurden zerkleinerte Buchenholz-Hackschnitzel eingesetzt. Variiert wurden als Hauptparameter des Prozesses Temperatur und Luftzahl. Untersucht wurde der Einfluss dieser Parameter auf die Qualitaet des Produktgases und die Umsetzung des Kohlenstoffes. Kornzersetzungs- und Austragsvorgaenge von Kohlenstoffpartikeln spielen eine wichtige Rolle fuer den Kohlenstoffumsatz. Unter Vergasungsbedingungen findet im Freeboard eine weitere Umsetzung der Partikel statt. (orig.)

Simultaneous PET/MRI with 13C magnetic resonance spectroscopic imaging (hyperPET): phantom-based evaluation of PET quantification

DEFF Research Database (Denmark)

Hansen, Adam E.; Andersen, Flemming L.; Henriksen, Sarah T.

2016-01-01

Background: Integrated PET/MRI with hyperpolarized 13C magnetic resonance spectroscopic imaging (13C-MRSI) offers simultaneous, dual-modality metabolic imaging. A prerequisite for the use of simultaneous imaging is the absence of interference between the two modalities. This has been documented...... for a clinical whole-body system using simultaneous 1 H-MRI and PET but never for 13C-MRSI and PET. Here, the feasibility of simultaneous PET and 13C-MRSI as well as hyperpolarized 13C-MRSI in an integrated whole-body PET/MRI hybrid scanner is evaluated using phantom experiments. Methods: Combined PET and 13C......-MRSI phantoms including a NEMA [18F]-FDG phantom, 13C-acetate and 13C-urea sources, and hyperpolarized 13C-pyruvate were imaged repeatedly with PET and/or 13C-MRSI. Measurements evaluated for interference effects included PET activity values in the largest sphere and a background region; total number of PET...

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

DEFF Research Database (Denmark)

Andersen, Thomas Rieks; Dam, Henrik Friis; Hösel, Markus

2014-01-01

the manufacture of completely functional devices in exceptionally high yields. Critical to the ink and process development is a carefully chosen technology transfer to industry method where first a roll coater is employed enabling contactless stack build up, followed by a small roll-to-roll coater fitted to an X...

Positron Emission Tomography (PET)

International Nuclear Information System (INIS)

Welch, M.J.

1990-01-01

Positron emission tomography (PET) assesses biochemical processes in the living subject, producing images of function rather than form. Using PET, physicians are able to obtain not the anatomical information provided by other medical imaging techniques, but pictures of physiological activity. In metaphoric terms, traditional imaging methods supply a map of the body's roadways, its, anatomy; PET shows the traffic along those paths, its biochemistry. This document discusses the principles of PET, the radiopharmaceuticals in PET, PET research, clinical applications of PET, the cost of PET, training of individuals for PET, the role of the United States Department of Energy in PET, and the futures of PET. 22 figs

Positron Emission Tomography (PET)

Science.gov (United States)

Welch, M. J.

1990-01-01

Positron emission tomography (PET) assesses biochemical processes in the living subject, producing images of function rather than form. Using PET, physicians are able to obtain not the anatomical information provided by other medical imaging techniques, but pictures of physiological activity. In metaphoric terms, traditional imaging methods supply a map of the body's roadways, its, anatomy; PET shows the traffic along those paths, its biochemistry. This document discusses the principles of PET, the radiopharmaceuticals in PET, PET research, clinical applications of PET, the cost of PET, training of individuals for PET, the role of the United States Department of Energy in PET, and the futures of PET.

Positron Emission Tomography (PET)

Energy Technology Data Exchange (ETDEWEB)

Welch, M.J.

1990-01-01

Positron emission tomography (PET) assesses biochemical processes in the living subject, producing images of function rather than form. Using PET, physicians are able to obtain not the anatomical information provided by other medical imaging techniques, but pictures of physiological activity. In metaphoric terms, traditional imaging methods supply a map of the body's roadways, its, anatomy; PET shows the traffic along those paths, its biochemistry. This document discusses the principles of PET, the radiopharmaceuticals in PET, PET research, clinical applications of PET, the cost of PET, training of individuals for PET, the role of the United States Department of Energy in PET, and the futures of PET. 22 figs.

Rezension von: Gabriele Dietze: Weiße Frauen in Bewegung. Genealogien und Konkurrenzen von Race- und Genderpolitiken. Bielefeld: transcript Verlag 2013.

Directory of Open Access Journals (Sweden)

Philipp Dorestal

2014-03-01

Full Text Available Gabriele Dietze zeichnet das Verhältnis der Kategorien Race und Gender innerhalb der US-amerikanischen Geschichte von der Mitte des 19. Jahrhunderts bis zur Präsidentschaftswahl von Barack Obama nach. Dabei demonstriert sie anhand von zentralen Figuren der weißen Frauenbewegung deren ambivalente Positionen, die oftmals für progressive Inhalte wie das Eintreten für Frauenrechte stehen, gleichzeitig aber dann Anliegen von African Americans nicht artikulieren oder gar zum Schweigen bringen. Ebenso zeigt Dietze mithilfe von Texten einiger schwarzer Autor_innen sowie anhand berühmter Gerichtsprozesse, dass schwarze Emanzipation nicht notwendigerweise mit feministischen Positionen einhergehen musste, sondern sich vielmehr eine Konkurrenzsituation zwischen Race und Gender entspann.

Indeterminate findings on oncologic PET/CT: What difference dose PET/MRI make?

Energy Technology Data Exchange (ETDEWEB)

Fraum, Tyler J.; Fowler, Kathryn J.; McConathy, Jonathan; Dehdashti, Farokh [Mallinckrodt Institute of Radiology, Washington University School of Medicine, Saint Louis (United States)

2016-12-15

Positron emission tomography/computed tomography (PET/CT) with 2-deoxy-2-[{sup 18}F]fluoro-D-glucose (FDG) has become the standard of care for the initial staging and subsequent treatment response assessment of many different malignancies. Despite this success, PET/CT is often supplemented by MRI to improve assessment of local tumor invasion and to facilitate detection of lesions in organs with high background FDG uptake. Consequently, PET/MRI has the potential to expand the clinical value of PET examinations by increasing reader certainty and reducing the need for subsequent imaging. This study evaluates the ability of FDG-PET/MRI to clarify findings initially deemed indeterminate on clinical FDG-PET/CT studies. A total of 190 oncology patients underwent whole-body PET/CT, immediately followed by PET/MRI utilizing the same FDG administration. Each PET/CT was interpreted by our institution's nuclear medicine service as a standard-of-care clinical examination. Review of these PET/CT reports identified 31 patients (16 %) with indeterminate findings. Two readers evaluated all 31 PET/CT studies, followed by the corresponding PET/MRI studies. A consensus was reached for each case, and changes in interpretation directly resulting from PET/MRI review were recorded. Interpretations were then correlated with follow-up imaging, pathology results, and other diagnostic studies. In 18 of 31 cases with indeterminate findings on PET/CT, PET/MRI resulted in a more definitive interpretation by facilitating the differentiation of infection/inflammation from malignancy (15/18), the accurate localization of FDG-avid lesions (2/18), and the characterization of incidental non-FDG-avid solid organ lesions (1/18). Explanations for improved reader certainty with PET/MRI included the superior soft tissue contrast of MRI and the ability to assess cellular density with diffusion-weighted imaging. The majority (12/18) of such cases had an appropriate standard of reference; in all 12 cases

Indeterminate findings on oncologic PET/CT: What difference dose PET/MRI make?

International Nuclear Information System (INIS)

Fraum, Tyler J.; Fowler, Kathryn J.; McConathy, Jonathan; Dehdashti, Farokh

2016-01-01

Positron emission tomography/computed tomography (PET/CT) with 2-deoxy-2-["1"8F]fluoro-D-glucose (FDG) has become the standard of care for the initial staging and subsequent treatment response assessment of many different malignancies. Despite this success, PET/CT is often supplemented by MRI to improve assessment of local tumor invasion and to facilitate detection of lesions in organs with high background FDG uptake. Consequently, PET/MRI has the potential to expand the clinical value of PET examinations by increasing reader certainty and reducing the need for subsequent imaging. This study evaluates the ability of FDG-PET/MRI to clarify findings initially deemed indeterminate on clinical FDG-PET/CT studies. A total of 190 oncology patients underwent whole-body PET/CT, immediately followed by PET/MRI utilizing the same FDG administration. Each PET/CT was interpreted by our institution's nuclear medicine service as a standard-of-care clinical examination. Review of these PET/CT reports identified 31 patients (16 %) with indeterminate findings. Two readers evaluated all 31 PET/CT studies, followed by the corresponding PET/MRI studies. A consensus was reached for each case, and changes in interpretation directly resulting from PET/MRI review were recorded. Interpretations were then correlated with follow-up imaging, pathology results, and other diagnostic studies. In 18 of 31 cases with indeterminate findings on PET/CT, PET/MRI resulted in a more definitive interpretation by facilitating the differentiation of infection/inflammation from malignancy (15/18), the accurate localization of FDG-avid lesions (2/18), and the characterization of incidental non-FDG-avid solid organ lesions (1/18). Explanations for improved reader certainty with PET/MRI included the superior soft tissue contrast of MRI and the ability to assess cellular density with diffusion-weighted imaging. The majority (12/18) of such cases had an appropriate standard of reference; in all 12 cases, the

Systematics of constant roll inflation

Science.gov (United States)

Anguelova, Lilia; Suranyi, Peter; Wijewardhana, L. C. R.

2018-02-01

We study constant roll inflation systematically. This is a regime, in which the slow roll approximation can be violated. It has long been thought that this approximation is necessary for agreement with observations. However, recently it was understood that there can be inflationary models with a constant, and not necessarily small, rate of roll that are both stable and compatible with the observational constraint ns ≈ 1. We investigate systematically the condition for such a constant-roll regime. In the process, we find a whole new class of inflationary models, in addition to the known solutions. We show that the new models are stable under scalar perturbations. Finally, we find a part of their parameter space, in which they produce a nearly scale-invariant scalar power spectrum, as needed for observational viability.

PET and PET/CT in tumour of undetermined origin; PET y PET/CT en tumor de origen indeterminado

Energy Technology Data Exchange (ETDEWEB)

Garcia O, J R [Nuclear Medicine and Molecular Imaging, PET/CT, Centro Medico ABC, Mexico D.F. (Mexico)

2007-07-01

In this presentation the following conclusions were obtained regarding the use of PET and PET/CT in patient with cancer of unknown primary: 1. Detection of the primary one in 1/3 at 1/2 of patient. 2. It detects metastases in other places in 50%. 3. It changes the initial therapy planned in 1/3 at 1/2 of patient. 4. Useful in initial phases of protocol study to limit the other procedures. After standard evaluation. Before advanced protocol. 5. PET/CT study increases the % of primary detection, although in a non significant way vs. PET. 6. They are required more studies to value their utility to a more objective manner. (Author)

Wohnquartiersbeschreibung: ein Instrument zur Regionalisierung von Nachbarschaften

OpenAIRE

Hoffmeyer-Zlotnik, Jürgen H. P.

2001-01-01

'Ausgehend von der Annahme, daß soziale Differenzierung sich in räumlicher Differenzierung niederschlägt, bietet eine Beschreibung der Struktur des näheren Wohnumfeldes die Möglichkeit, das Wohnquartier als Handlungsraum und Sozialisationsinstanz zur Interpretation von Umfragedaten zu nutzen. Das vorliegende Instrumentarium erlaubt es, das Wohnquartier unabhängig von Zensusdaten über Merkmale, die in der eigenen Umfrage erhoben werden, zu charakterisieren.' (Autorenreferat) 'The general hy...

Constant-roll tachyon inflation and observational constraints

Science.gov (United States)

Gao, Qing; Gong, Yungui; Fei, Qin

2018-05-01

For the constant-roll tachyon inflation, we derive the analytical expressions for the scalar and tensor power spectra, the scalar and tensor spectral tilts and the tensor to scalar ratio to the first order of epsilon1 by using the method of Bessel function approximation. The derived ns-r results are compared with the observations, we find that only the constant-roll inflation with ηH being a constant is consistent with the observations and observations constrain the constant-roll inflation to be slow-roll inflation. The tachyon potential is also reconstructed for the constant-roll inflation which is consistent with the observations.

Optimized sampling of hydroperoxides and investigations of the water vapour dependence of hydroperoxide formation during ozonolysis of alkenes; Optimierung der Probenahme von Hydroperoxiden und Untersuchungen zur Wasserdampfabhaengigkeit der Bildung von Hydroperoxiden bei der Ozonolyse von Alkenen

Energy Technology Data Exchange (ETDEWEB)

Becker, K.H.; Plagens, H.

1997-06-01

There are several sampling methods for hydroperoxides none of which is particularly reliable. The authors therefore tested three new methods in order to optimize hydroperoxide sampling and, using the optimized sampling procedure, to investigate the water vapour dependence of hydroperoxide formation during ozonolysis of alkenes. (orig.) [Deutsch] Fuer die Probenahme von Hydroperoxiden existieren verschiedene Verfahren, von denen bisher keines als besonders zuverlaessig angesehen werden konnte. Daher wurden in dieser Arbeit drei Verfahren getestet, um die Probenahme von Hydroperoxiden zu optimieren und mit dem entsprechenden Verfahren die Wasserdampfabhaengigkeit der Bildung von Hydroperoxiden bei der Ozonolyse von Alkenen zu untersuchen. (orig.)

Simultaneous PET/MRI with (13)C magnetic resonance spectroscopic imaging (hyperPET): phantom-based evaluation of PET quantification.

Science.gov (United States)

Hansen, Adam E; Andersen, Flemming L; Henriksen, Sarah T; Vignaud, Alexandre; Ardenkjaer-Larsen, Jan H; Højgaard, Liselotte; Kjaer, Andreas; Klausen, Thomas L

2016-12-01

Integrated PET/MRI with hyperpolarized (13)C magnetic resonance spectroscopic imaging ((13)C-MRSI) offers simultaneous, dual-modality metabolic imaging. A prerequisite for the use of simultaneous imaging is the absence of interference between the two modalities. This has been documented for a clinical whole-body system using simultaneous (1)H-MRI and PET but never for (13)C-MRSI and PET. Here, the feasibility of simultaneous PET and (13)C-MRSI as well as hyperpolarized (13)C-MRSI in an integrated whole-body PET/MRI hybrid scanner is evaluated using phantom experiments. Combined PET and (13)C-MRSI phantoms including a NEMA [(18)F]-FDG phantom, (13)C-acetate and (13)C-urea sources, and hyperpolarized (13)C-pyruvate were imaged repeatedly with PET and/or (13)C-MRSI. Measurements evaluated for interference effects included PET activity values in the largest sphere and a background region; total number of PET trues; and (13)C-MRSI signal-to-noise ratio (SNR) for urea and acetate phantoms. Differences between measurement conditions were evaluated using t tests. PET and (13)C-MRSI data acquisition could be performed simultaneously without any discernible artifacts. The average difference in PET activity between acquisitions with and without simultaneous (13)C-MRSI was 0.83 (largest sphere) and -0.76 % (background). The average difference in net trues was -0.01 %. The average difference in (13)C-MRSI SNR between acquisitions with and without simultaneous PET ranged from -2.28 to 1.21 % for all phantoms and measurement conditions. No differences were significant. The system was capable of (13)C-MRSI of hyperpolarized (13)C-pyruvate. Simultaneous PET and (13)C-MRSI in an integrated whole-body PET/MRI hybrid scanner is feasible. Phantom experiments showed that possible interference effects introduced by acquiring data from the two modalities simultaneously are small and non-significant. Further experiments can now investigate the benefits of simultaneous PET and

Anisotropic constant-roll inflation

Energy Technology Data Exchange (ETDEWEB)

Ito, Asuka; Soda, Jiro [Kobe University, Department of Physics, Kobe (Japan)

2018-01-15

We study constant-roll inflation in the presence of a gauge field coupled to an inflaton. By imposing the constant anisotropy condition, we find new exact anisotropic constant-roll inflationary solutions which include anisotropic power-law inflation as a special case. We also numerically show that the new anisotropic solutions are attractors in the phase space. (orig.)

Cosmology with rolling tachyon

Indian Academy of Sciences (India)

Email: sami@iucaa.ernet.in. Abstract. We examine the possibility of rolling tachyon to play the dual role of inflaton at early epochs and dark matter at late times. We argue that enough inflation can be generated with the rolling tachyon either by invoking the large number of branes or brane world assisted inflation. However ...

METHOD OF HOT ROLLING URANIUM METAL

Science.gov (United States)

Kaufmann, A.R.

1959-03-10

A method is given for quickly and efficiently hot rolling uranium metal in the upper part of the alpha phase temperature region to obtain sound bars and sheets possessing a good surface finish. The uranium metal billet is heated to a temperature in the range of 1000 deg F to 1220 deg F by immersion iii a molten lead bath. The heated billet is then passed through the rolls. The temperature is restored to the desired range between successive passes through the rolls, and the rolls are turned down approximately 0.050 inch between successive passes.

Microstructure formation via roll-to-roll UV embossing using a flexible mould made from a laminated polymer–copper film

International Nuclear Information System (INIS)

Zhong, Z W; Shan, X C

2012-01-01

Roll-to-roll large format UV embossing processes aim to revolutionize the manufacturing of functional films, with the ability to process a large area at one time, resulting in high throughput and cost reduction. In this paper, we present the experimental results obtained during the process development for roll-to-roll large format UV embossing. Flexible moulds were fabricated from a hybrid film substrate made of a liquid crystal polymer with clad copper foils laminated on both sides of it. The effective pattern area of the fabricated flexible mould was 400 mm × 300 mm with a minimal feature size of 50 µm. The results show that the roll-to-roll embossing processes are capable of producing micro-scale structures and functional devices over a large area at one time. Large-area roll-to-roll embossing was demonstrated by using the hybrid flexible mould, and micro-features and structures such as micro-channels and dot arrays were replicated on thermoplastic substrates. In addition to its ease and low cost in fabrication, the hybrid flexible moulds demonstrated to have acceptable fidelity and durability. The hybrid flexible mould is a novel solution for large-area embossing. (paper)

75 FR 32160 - Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products from Brazil: Extension of Time Limit...

Science.gov (United States)

2010-06-07

...-Rolled Carbon-Quality Steel Products from Brazil: Extension of Time Limit for Preliminary Results of...-quality steel products from Brazil. See Agreement Suspending the Countervailing Duty Investigation on Hot... duty order on certain hot-rolled flat-rolled carbon-quality steel products from Brazil. See Initiation...

Microstructural evolution in warm-rolled and cold-rolled strip cast 6.5 wt% Si steel thin sheets and its influence on magnetic properties

Energy Technology Data Exchange (ETDEWEB)

Wang, Xianglong, E-mail: 215454278@qq.com; Liu, Zhenyu, E-mail: zyliu@mail.neu.edu.cn; Li, Haoze; Wang, Guodong

2017-07-01

Highlights: • The experimental materials used in the study are based on strip casting. • Magnetic properties between warm rolled and cold rolled sheets are investigated. • Cold rolled 6.5% Si sheet has better magnetic properties than warm rolled sheet. • The γ and λ-fiber recrystallization textures can be optimized after cold rolling. • Cold rolling should be more suitable for fabricating 6.5% Si steel thin sheets. - Abstract: 6.5 wt% Si steel thin sheets were usually fabricated by warm rolling. In our previous work, 6.5 wt% Si steel thin sheets with good magnetic properties had been successfully fabricated by cold rolling based on strip casting. In the present work, the main purposes were to find out the influences of warm rolling and cold rolling on microstructures and magnetic properties of the thin sheets with the thickness of 0.2 mm, and to confirm which rolling method was more suitable for fabricating 6.5 wt% Si steel thin sheets. The results showed that the cold rolled sheet could obtain good surface quality and flatness, while the warm rolled sheet could not. The intensity of γ-fiber rolling texture (<1 1 1>//ND) of cold rolled specimen was weaker than that of the warm rolled specimen, especially for the {1 1 1}<1 1 2> component at surface layer and {1 1 1}<1 1 0> component at center layer. After the same annealing treatment, the cold rolled specimen, which had higher stored energy and weaker intensity of γ-fiber rolling texture, could obtain smaller recrystallization grain size, weaker intensity of γ-fiber recrystallization texture and stronger intensity of λ-fiber recrystallization texture. Therefore, due to the good surface quality, smaller recrystallization grain size and optimum recrystallization texture, the cold rolled specimen possessed improved magnetic properties, and cold rolling should be more suitable for fabricating 6.5 wt% Si steel thin sheets.

Just Roll with It? Rolling Volumes vs. Discrete Issues in Open Access Library and Information Science Journals

Directory of Open Access Journals (Sweden)

Jill Cirasella

2013-08-01

Full Text Available INTRODUCTION Articles in open access (OA journals can be published on a rolling basis, as they become ready, or in complete, discrete issues. This study examines the prevalence of and reasons for rolling volumes vs. discrete issues among scholarly OA library and information science (LIS journals based in the United States. METHODS A survey was distributed to journal editors, asking them about their publication model and their reasons for and satisfaction with that model. RESULTS Of the 21 responding journals, 12 publish in discrete issues, eight publish in rolling volumes, and one publishes in rolling volumes with an occasional special issue. Almost all editors, regardless of model, cited ease of workflow as a justification for their chosen publication model, suggesting that there is no single best workflow for all journals. However, while all rolling-volume editors reported being satisfied with their model, satisfaction was less universal among discrete-issue editors. DISCUSSION The unexpectedly high number of rolling-volume journals suggests that LIS journal editors are making forward-looking choices about publication models even though the topic has not been much addressed in the library literature. Further research is warranted; possibilities include expanding the study’s geographic scope, broadening the study to other disciplines, and investigating publication model trends across the entire scholarly OA universe. CONCLUSION Both because satisfaction is high among editors of rolling-volume journals and because readers and authors appreciate quick publication times, the rolling-volume model will likely become even more prevalent in coming years.

Pet Allergy Quiz

Science.gov (United States)

... Treatments ▸ Allergies ▸ Pet Allergy ▸ Pet Allergy Quiz Share | Pet Allergy Quiz More than half of U.S. households ... cat family. Yet, millions of people suffer from pet allergies. Take this quiz to test your knowledge ...

Colorectal cancer staging: comparison of whole-body PET/CT and PET/MR.

Science.gov (United States)

Catalano, Onofrio A; Coutinho, Artur M; Sahani, Dushyant V; Vangel, Mark G; Gee, Michael S; Hahn, Peter F; Witzel, Thomas; Soricelli, Andrea; Salvatore, Marco; Catana, Ciprian; Mahmood, Umar; Rosen, Bruce R; Gervais, Debra

2017-04-01

Correct staging is imperative for colorectal cancer (CRC) since it influences both prognosis and management. Several imaging methods are used for this purpose, with variable performance. Positron emission tomography-magnetic resonance (PET/MR) is an innovative imaging technique recently employed for clinical application. The present study was undertaken to compare the staging accuracy of whole-body positron emission tomography-computed tomography (PET/CT) with whole-body PET/MR in patients with both newly diagnosed and treated colorectal cancer. Twenty-six patients, who underwent same day whole-body (WB) PET/CT and WB-PET/MR, were evaluated. PET/CT and PET/MR studies were interpreted by consensus by a radiologist and a nuclear medicine physician. Correlations with prior imaging and follow-up studies were used as the reference standard. Correct staging was compared between methods using McNemar's Chi square test. The two methods were in agreement and correct for 18/26 (69%) patients, and in agreement and incorrect for one patient (3.8%). PET/MR and PET/CT stages for the remaining 7/26 patients (27%) were discordant, with PET/MR staging being correct in all seven cases. PET/MR significantly outperformed PET/CT overall for accurate staging (P = 0.02). PET/MR outperformed PET/CT in CRC staging. PET/MR might allow accurate local and distant staging of CRC patients during both at the time of diagnosis and during follow-up.

Homopteren von Java, gesammelt von Herrn Edw. Jacobson

NARCIS (Netherlands)

Melichar, L.

1914-01-01

Herr Edw. Jacobson hat auf Java in den Jahren 1908— 1910 Homopteren gesammelt und mir die Bearbeitung des gesammelten Materiales übertragen. Die Jacobson’sche Ausbeute ist insoferne bemerkenswert, als dieselbe viele Mikrohomopteren enthält, welche von nichtfachkundigen Sammlern gewöhnlich nicht

TOF-PET/MR和TOF-PET/CT在体部恶性肿瘤SUVmax值的比较%Comparision of SUVmax of TOF-PET/MR and TOF-PET/CT in body malignant tumor

Institute of Scientific and Technical Information of China (English)

宋天彬; 卢洁; 崔碧霄; 马杰; 杨宏伟; 马蕾; 梁志刚

2017-01-01

目的 探讨时间飞行(TOF)技术PET/CT和PET/MR检查体部恶性病变SUVmax值的一致性.方法 回顾性分析接受TOF-PET/CT和TOF-PET/MR检查的体部恶性肿瘤患者20例,分为先PET/CT后PET/MR组和先PET/MR后PET/CT组,每组10例.采用Bland-Altma图评价两次检查病灶SUVmax值的一致性,采用多因素方差分析评价扫描顺序和机器类型对病灶的SUVmax测量值的影响.结果 TOF-PET/CT与TOF-PET/MR检查病灶的SUVmax值有较好的一致性[先PET/CT后PET/MR组:均值差为3.06,95％CI(-7.5,13.6),先PET/MR后PET/CT组:均值差3.0,95％CI(-2.4,8.3)].扫描顺序对于恶性病灶的SUVmax有影响(F=46.00,P＜0.001),而机器类型对恶性病灶的SUVmax值无影响(F=0.005,P=0.95).结论 TOF-PET/MR和TOF-PET/CT在体部恶性病变SUVmax值测量方面具有相当的诊断价值,且延迟显像SUVmax的增加与采集时间有关,而与检查机器类型无关.%Objective To explore the consistency of time-of-flight (TOF) technology of PET/MRI and PET/CT for max standardized uptake value (SUVmax) of body malignant tumors.Methods A retrospective analysis of TOF-PET/CT and TOF-PET/MR imaging data about twenty patients with body malignant tumors was performed.Patients were divided into two groups (each n=10),including PET/CT first and sequentially PET/MR group and PET/MR first and sequentially PET/CT group.Bland-Altman figure was used to evaluate consistency of SUVmax of malignant lesions between TOF-PET/CT and TOF-PET/MR.Multi-way ANOVA was used to analysis effect of machine type and exam order on SUVmaxof malignant lesions in TOF-PET/CT and TOF-PET/MR.Results SUVmax of malignant lesions in TOF-PET/CT and TOF-PET/MR had good consistency in two groups (PET/CT first and sequentially PET/MR group:Mean difference was 3.06,95％CI was [-7.5,13.6];PET/MR first and sequentially PET/CT group:Mean difference was 3.0,95％CI was [-2.4,8.3]).SUVmax was not influenced by machine type (F=0.005,P=0.95),but exam order (F=46.00,P＜0

Roll-to-roll compatible organic thin film transistor manufacturing technique by printing, lamination, and laser ablation

International Nuclear Information System (INIS)

Hassinen, Tomi; Ruotsalainen, Teemu; Laakso, Petri; Penttilä, Raimo; Sandberg, Henrik G.O.

2014-01-01

We present roll-to-roll printing compatible techniques for manufacturing organic thin film transistors using two separately processed foils that are laminated together. The introduction of heat-assisted lamination opens up possibilities for material and processing combinations. The lamination of two separately processed substrates together will allow usage of pre-patterned electrodes on both substrates and materials with non-compatible solvents. Also, the surface microstructure is formed differently when laminating dry films together compared to film formation from liquid phase. Demonstrator transistors, inverters and ring oscillators were produced using lamination techniques. Finally, a roll-to-roll compatible lamination concept is proposed where also the source and drain electrodes are patterned by laser ablation. The demonstrator transistors have shown very good lifetime in air, which is contributed partly to the good material combination and partly to the enhanced interface formation in heat-assisted lamination process. - Highlights: • A roll-to-roll compatible lamination technique for printed electronics is proposed. • Laser ablation allows highly defined metal top and bottom electrodes. • Method opens up processing possibilities for incompatible materials and solvents. • Shearing forces may enhance molecular orientation and packing. • An air stable polymer transistor is demonstrated with a lifetime of years

Inflation with a constant rate of roll

International Nuclear Information System (INIS)

Motohashi, Hayato; Starobinsky, Alexei A.; Yokoyama, Jun'ichi

2015-01-01

We consider an inflationary scenario where the rate of inflaton roll defined by ·· φ/H φ-dot remains constant. The rate of roll is small for slow-roll inflation, while a generic rate of roll leads to the interesting case of 'constant-roll' inflation. We find a general exact solution for the inflaton potential required for such inflaton behaviour. In this model, due to non-slow evolution of background, the would-be decaying mode of linear scalar (curvature) perturbations may not be neglected. It can even grow for some values of the model parameter, while the other mode always remains constant. However, this always occurs for unstable solutions which are not attractors for the given potential. The most interesting particular cases of constant-roll inflation remaining viable with the most recent observational data are quadratic hilltop inflation (with cutoff) and natural inflation (with an additional negative cosmological constant). In these cases even-order slow-roll parameters approach non-negligible constants while the odd ones are asymptotically vanishing in the quasi-de Sitter regime

High-throughput roll-to-roll X-ray characterization of polymer solar cell active layers

DEFF Research Database (Denmark)

Böttiger, Arvid P.L.; Jørgensen, Mikkel; Menzel, Andreas

2012-01-01

Synchrotron-based X-rays were used to probe active materials for polymer solar cells on flexible polyester foil. The active material was coated onto a flexible 130 micron thick polyester foil using roll-to-roll differentially pumped slot-die coating and presented variation in composition, thickness...

Origins of Rolling Friction

Science.gov (United States)

Cross, Rod

2017-01-01

When a hard object rolls on a soft surface, or vice versa, rolling friction arises from deformation of the soft object or the soft surface. The friction force can be described in terms of an offset in the normal reaction force or in terms of energy loss arising from the deformation. The origin of the friction force itself is not entirely clear. It…

[Anja Wilhelmi. Lebensweltlen von Frauen der deutschen Oberschicht im Baltikum (1800-1939). Eine Untersuchung anhand von Autobiographien] / Alexander Ewig

Index Scriptorium Estoniae

Ewig, Alexander, 1980-

2011-01-01

Arvustus: Wilhelmi, Anja. Lebenswelten von Frauen der deutschen Oberschicht im Baltikum (1800-1939). Eine Untersuchung anhand von Autobiographien. (Veröffentlichungen des Nordost-Instituts, 10.) (Wiesbaden : HArrassowitz 2008)

Towards roll-to-roll manufacturing of polymer photonic devices

Science.gov (United States)

Subbaraman, Harish; Lin, Xiaohui; Ling, Tao; Guo, L. Jay; Chen, Ray T.

2014-03-01

Traditionally, polymer photonic devices are fabricated using clean-room processes such as photolithography, e-beam lithography, reactive ion etching (RIE) and lift-off methods etc, which leads to long fabrication time, low throughput and high cost. We have utilized a novel process for fabricating polymer photonic devices using a combination of imprinting and ink jet printing methods, which provides high throughput on a variety of rigid and flexible substrates with low cost. We discuss the manufacturing challenges that need to be overcome in order to realize true implementation of roll-to-roll manufacturing of flexible polymer photonic systems. Several metrology and instrumentation challenges involved such as availability of particulate-free high quality substrate, development and implementation of high-speed in-line and off-line inspection and diagnostic tools with adaptive control for patterned and unpatterned material films, development of reliable hardware, etc need to be addressed and overcome in order to realize a successful manufacturing process. Due to extreme resolution requirements compared to print media, the burden of software and hardware tools on the throughput also needs to be carefully determined. Moreover, the effect of web wander and variations in web speed need to accurately be determined in the design of the system hardware and software. In this paper, we show the realization of solutions for few challenges, and utilizing these solutions for developing a high-rate R2R dual stage ink-jet printer that can provide alignment accuracy of web speed of 5m/min. The development of a roll-to-roll manufacturing system for polymer photonic systems opens limitless possibilities for the deployment of high performance components in a variety of applications including communication, sensing, medicine, agriculture, energy, lighting etc.

Rolling block mazes are PSPACE-complete

NARCIS (Netherlands)

Buchin, K.; Buchin, M.

2012-01-01

In a rolling block maze, one or more blocks lie on a rectangular board with square cells. In most mazes, the blocks have size k × m × n where k, m, n are integers that determine the size of the block in terms of units of the size of the board cells. The task of a rolling block maze is to roll a

Dedicated brain PET system of PET/MR for brain research

International Nuclear Information System (INIS)

Cheng, Li; Liu, Yaqiang; Ma, Tianyu; Wang, Shi; Wei, Qingyang; Xu, Tianpeng

2015-01-01

This work is to replace PET ring in human brain PET/MR system with a dedicated wearable PET insert, aimed at improving both patient feasibility and system performance for brain imaging. The designed PET/MR system includes two parts: the inside parts, including a radio frequency (RF) coil and PET ring, are mounted on patient’s head, and the outside part, a MR imager, is dependent of patient. The RF coil is the innermost layer, surrounded by an outer PET-ring layer. They are supported by a MRcompatible structure. And both RF coil and PET detectors are placed inside a standard clinical 3-T MR imager. From the design of the system we can infer that some advantages can be achieved. First, high sensitivity will be achieved with the same amount crystals as the PET ring is more close to region-of-interest area, at a reduced cost. Second, by using a 2-layer depth of interaction (DOI) detector, the parallax effect can be minimized. The resolution will benefit from short positron range caused by magnetic field and smaller ring diameter will also reduce the effect of non-collinearity. Thirdly, as the PET ring is mounted on head, impact of patient motion will be reduced.

Dedicated brain PET system of PET/MR for brain research

Energy Technology Data Exchange (ETDEWEB)

Cheng, Li; Liu, Yaqiang; Ma, Tianyu; Wang, Shi; Wei, Qingyang; Xu, Tianpeng [Institute of Medical Physics, Department of Engineering Physics, Tsinghua University, Beijing (China)

2015-05-18

This work is to replace PET ring in human brain PET/MR system with a dedicated wearable PET insert, aimed at improving both patient feasibility and system performance for brain imaging. The designed PET/MR system includes two parts: the inside parts, including a radio frequency (RF) coil and PET ring, are mounted on patient’s head, and the outside part, a MR imager, is dependent of patient. The RF coil is the innermost layer, surrounded by an outer PET-ring layer. They are supported by a MRcompatible structure. And both RF coil and PET detectors are placed inside a standard clinical 3-T MR imager. From the design of the system we can infer that some advantages can be achieved. First, high sensitivity will be achieved with the same amount crystals as the PET ring is more close to region-of-interest area, at a reduced cost. Second, by using a 2-layer depth of interaction (DOI) detector, the parallax effect can be minimized. The resolution will benefit from short positron range caused by magnetic field and smaller ring diameter will also reduce the effect of non-collinearity. Thirdly, as the PET ring is mounted on head, impact of patient motion will be reduced.

Innovations for glazing of buildings; Innovationen fuer die Verglasung von Gebaeuden

Energy Technology Data Exchange (ETDEWEB)

Wittwer, V. [Fraunhofer-Inst. fuer Solare Energiesysteme, Freiburg (Germany). Abt. Thermische und Optische Systeme

1998-02-01

There are two main aspects in the development of new glazing. On the one hand, windows with extremely low thermal conductivity are wanted. On the other hand, solar irradiation should contribute to thermal gains during the heating season. A large number of different coatings and window systems is suited for many different applications. In particular for the prevention of overheating in the summer, there is a huge interest in glazing regulating the irradiation itself without additional mechanical devices. Indeed, innovations have sprung using several of these ideas. (orig.) [Deutsch] Bei der Entwicklung neuer Verglasungen spielen zwei Gesichtspunkte eine hervorragende Rolle. Zum einen ist man an Fenstern mit sehr geringen Waermeverlusten interessiert. Zum anderen soll aber auch die solare Einstrahlung waehrend der Heizperiode zu thermischen Gewinnen beitragen. Die Vielfalt der einsetzbaren Beschichtungen und Fenstersysteme ermoeglicht eine breite Palette von Anwendungsmoeglichkeiten. Insbesondere um Ueberhitzungsprobleme im Sommer auszuschliessen, ist man an Verglasungen interessiert, die die Einstrahlung selber, d.h. ohne mechanische Zusaetze, regeln. Tatsaechlich fuehren hierfuer verschiedene Ansaetze zu Neuentwicklungen. (orig.)

Clarifying the link between von Neumann and thermodynamic entropies

Science.gov (United States)

Deville, Alain; Deville, Yannick

2013-01-01

The state of a quantum system being described by a density operator ρ, quantum statistical mechanics calls the quantity - kTr( ρln ρ), introduced by von Neumann, its von Neumann or statistical entropy. A 1999 Shenker's paper initiated a debate about its link with the entropy of phenomenological thermodynamics. Referring to Gibbs's and von Neumann's founding texts, we replace von Neumann's 1932 contribution in its historical context, after Gibbs's 1902 treatise and before the creation of the information entropy concept, which places boundaries into the debate. Reexamining von Neumann's reasoning, we stress that the part of his reasoning implied in the debate mainly uses thermodynamics, not quantum mechanics, and identify two implicit postulates. We thoroughly examine Shenker's and ensuing papers, insisting upon the presence of open thermodynamical subsystems, imposing us the use of the chemical potential concept. We briefly mention Landau's approach to the quantum entropy. On the whole, it is shown that von Neumann's viewpoint is right, and why Shenker's claim that von Neumann entropy "is not the quantum-mechanical correlate of thermodynamic entropy" can't be retained.

Maintenance Appointments in Railway Rolling Stock Rescheduling

NARCIS (Netherlands)

J.C. Wagenaar (Joris); L.G. Kroon (Leo); M.E. Schmidt (Marie)

2016-01-01

textabstractThis paper addresses the Rolling Stock Rescheduling Problem (RSRP), while taking maintenance appointments into account. After a disruption, the rolling stock of the disrupted passenger trains has to be rescheduled in order to restore a feasible rolling stock circulation. Usually, a

Roll-to-roll DBD plasma pretreated polyethylene web for enhancement of Al coating adhesion and barrier property

Energy Technology Data Exchange (ETDEWEB)

Zhang, Haibao; Li, Hua; Fang, Ming; Wang, Zhengduo; Sang, Lijun; Yang, Lizhen; Chen, Qiang, E-mail: lppmchenqiang@hotmail.com

2016-12-01

Graphical abstract: The images of Al coating adhesion testes for (a) untreated and (b) roll-to-roll DBD plasma treated PE. - Highlights: • Over three-months ageing a high surface energy was still existed in roll-to-roll DBD plasma-treated PE surface. • The adhesion and barrier property of Al-coated PE web were greatly improved. • The mechanism of plasma grafting to improve the properties of Al-coated PE web was found. - Abstract: In this paper the roll-to-roll atmospheric dielectric barrier discharge (DBD) was used to pre-treat polyethylene (PE) web surface before the conventional thermal evaporation aluminum (Al) was performed as a barrier layer. We emphasized the plasma environment effect based on the inlet three kinds of reactive monomers. The cross hatch test was employed to assess the Al coating adhesion; and the oxygen transmission rate (OTR) was used to evaluate gas barrier property. The results showed that after roll-to-roll DBD plasma treatment all Al coatings adhered strongly on PE films and were free from pinhole defects with mirror morphology. The OTR was reduced from 2673 cm{sup 3}/m{sup 2} day for Al-coated original PE to 138 cm{sup 3}/m{sup 2} day for Al-coated allyamine (C{sub 3}H{sub 7}N) modified PE. To well understand the mechanism the chemical compositions of the untreated and DBD plasma pretreated PE films were analyzed by X-ray photoelectron spectroscopy (XPS). The surface topography was characterized by atomic force microscopy (AFM). For the property of surface energy the water contact angle measurement was also carried out in the DBD plasma treated samples with deionized water.

Roll-to-roll DBD plasma pretreated polyethylene web for enhancement of Al coating adhesion and barrier property

International Nuclear Information System (INIS)

Zhang, Haibao; Li, Hua; Fang, Ming; Wang, Zhengduo; Sang, Lijun; Yang, Lizhen; Chen, Qiang

2016-01-01

Graphical abstract: The images of Al coating adhesion testes for (a) untreated and (b) roll-to-roll DBD plasma treated PE. - Highlights: • Over three-months ageing a high surface energy was still existed in roll-to-roll DBD plasma-treated PE surface. • The adhesion and barrier property of Al-coated PE web were greatly improved. • The mechanism of plasma grafting to improve the properties of Al-coated PE web was found. - Abstract: In this paper the roll-to-roll atmospheric dielectric barrier discharge (DBD) was used to pre-treat polyethylene (PE) web surface before the conventional thermal evaporation aluminum (Al) was performed as a barrier layer. We emphasized the plasma environment effect based on the inlet three kinds of reactive monomers. The cross hatch test was employed to assess the Al coating adhesion; and the oxygen transmission rate (OTR) was used to evaluate gas barrier property. The results showed that after roll-to-roll DBD plasma treatment all Al coatings adhered strongly on PE films and were free from pinhole defects with mirror morphology. The OTR was reduced from 2673 cm 3 /m 2 day for Al-coated original PE to 138 cm 3 /m 2 day for Al-coated allyamine (C 3 H 7 N) modified PE. To well understand the mechanism the chemical compositions of the untreated and DBD plasma pretreated PE films were analyzed by X-ray photoelectron spectroscopy (XPS). The surface topography was characterized by atomic force microscopy (AFM). For the property of surface energy the water contact angle measurement was also carried out in the DBD plasma treated samples with deionized water.

Privatiserung von Geschichte. Probleme einer differenzierten Aufarbeitung

Directory of Open Access Journals (Sweden)

Birthe Kundrus

2000-11-01

Full Text Available Ausgangspunkt der Untersuchung von Vera Neumann ist die These, daß im Krieg Erlebtes und Erlittenes in den Wiederaufbau- und Wirtschaftswunderjahren Westdeutschlands einem Thematisierungstabu unterlegen sei. Anhand von 50 Interviews, die in den 80er Jahren im Rahmen des von Lutz Niethammer geleiteten Projekts „Lebensgeschichte und Sozialgeschichte im Ruhrgebiet 1930–1960“ (LUSIR entstanden sind und die sie jetzt anhand der Tonbandprotokolle und Abschriften ein zweites Mal auswertet, möchte die Historikerin diese Verschüttungen aufspüren. Im Anschluß an Niethammers These der „Privatisierung von Geschichte“ will sie zeigen, daß seelische und körperliche Kriegsfolgen wie Deprivations- und Überlastungsgefühle, der Verlust von Angehörigen und Kriegsbeschädigungen „privatisiert“, d.h. an die Familien übertragen wurden. Dort seien dann in erster Linie die weiblichen Familienmitglieder mit der Versorgungs- und Pflegearbeit konfrontiert worden. An vier Fallbeispiele schließt sich eine detaillierte Auswertung des gesamten Interviewmaterials an. Diesen Teilen folgt ein Abschnitt zur staatlichen Kriegsopferversorgung in der frühen Bundesrepublik.

Design and analysis of roll cage

Science.gov (United States)

Angadi, Gurusangappa; Chetan, S.

2018-04-01

Wildlife fire fighting vehicles are used to extinguish fires in forests, in this process vehicles face falling objects like rocks, tree branches and other objects. Also due to uneven conditions of the terrain like cliff edges, uneven surfaces etc. makes the vehicle to roll over and these can cause injuries to both the driver and the operator. Roll over of a vehicle is a common incident which makes fatal injuries to the operator and also stands next to the crash accidents. In order to reduce the injury level and continuous roll over of the vehicle it is necessary to equip suitable roll cage according to standards of vehicle. In this present work roll cage for pump operator in wildfire fighting vehicle is designed and analysis is carried out in computer simulated environment when seating position of operator seated outside of the cabin. According to NFPA 1906 standards wildlife fire apparatus, Design and Test procedures that are carried out in Hyperworks maintaining SAE J1194.1983 standards. G load case, roof crush analysis and pendulum impact analysis tests are carried out on roll cage to ensure the saftey of design. These load cases are considerd to satisfy the situation faced in forest terrain. In these test procedures roll cage is analysed for stresses and deformation in various load cases. After recording results these are compared with standards mentioned in SAE J1194.1983.

Erzeugung gleichverteilter Stichproben von Lozenge-Teilungen mittels Kopplung von Markovketten

OpenAIRE

Keller, Peter

2011-01-01

Aus dem Inhalt: 1 Einleitung 2 Eigenschaften der Lozengeteilungen 3 Coupling From The Past (CFTP) 4 Simulation von uniform verteilten Lozengeteilungen 5 Programmlisting und Diskussion der Implementierung 6 Ausblick A Anhang

Effect of Attenuation Correction on Regional Quantification Between PET/MR and PET/CT

DEFF Research Database (Denmark)

Teuho, Jarmo; Johansson, Jarkko; Linden, Jani

2016-01-01

UNLABELLED: A spatial bias in brain PET/MR exists compared with PET/CT, because of MR-based attenuation correction. We performed an evaluation among 4 institutions, 3 PET/MR systems, and 4 PET/CT systems using an anthropomorphic brain phantom, hypothesizing that the spatial bias would be minimized....../MR systems, CTAC was applied as the reference method for attenuation correction. RESULTS: With CTAC, visual and quantitative differences between PET/MR and PET/CT systems were minimized. Intersystem variation between institutions was +3.42% to -3.29% in all VOIs for PET/CT and +2.15% to -4.50% in all VOIs...... for PET/MR. PET/MR systems differed by +2.34% to -2.21%, +2.04% to -2.08%, and -1.77% to -5.37% when compared with a PET/CT system at each institution, and these differences were not significant (P ≥ 0.05). CONCLUSION: Visual and quantitative differences between PET/MR and PET/CT systems can be minimized...

Visualisierung von typisierten Links in Linked Data

Directory of Open Access Journals (Sweden)

Georg Neubauer

2017-09-01

Full Text Available Das Themengebiet der Arbeit behandelt Visualisierungen von typisierten Links in Linked Data. Die wissenschaftlichen Gebiete, die im Allgemeinen den Inhalt des Beitrags abgrenzen, sind das Semantic Web, das Web of Data und Informationsvisualisierung. Das Semantic Web, das von Tim Berners Lee 2001 erfunden wurde, stellt eine Erweiterung zum World Wide Web (Web 2.0 dar. Aktuelle Forschungen beziehen sich auf die Verknüpfbarkeit von Informationen im World Wide Web. Um es zu ermöglichen, solche Verbindungen wahrnehmen und verarbeiten zu können sind Visualisierungen die wichtigsten Anforderungen als Hauptteil der Datenverarbeitung. Im Zusammenhang mit dem Sematic Web werden Repräsentationen von zuhammenhängenden Informationen anhand von Graphen gehandhabt. Der Grund des Entstehens dieser Arbeit ist in erster Linie die Beschreibung der Gestaltung von Linked Data-Visualisierungskonzepten, deren Prinzipien im Rahmen einer theoretischen Annäherung eingeführt werden. Anhand des Kontexts führt eine schrittweise Erweiterung der Informationen mit dem Ziel, praktische Richtlinien anzubieten, zur Vernetzung dieser ausgearbeiteten Gestaltungsrichtlinien. Indem die Entwürfe zweier alternativer Visualisierungen einer standardisierten Webapplikation beschrieben werden, die Linked Data als Netzwerk visualisiert, konnte ein Test durchgeführt werden, der deren Kompatibilität zum Inhalt hatte. Der praktische Teil behandelt daher die Designphase, die Resultate, und zukünftige Anforderungen des Projektes, die durch die Testung ausgearbeitet wurden.

Quantitative PET imaging with the 3T MR-BrainPET

International Nuclear Information System (INIS)

Weirich, C.; Scheins, J.; Lohmann, P.; Tellmann, L.; Byars, L.; Michel, C.; Rota Kops, E.; Brenner, D.; Herzog, H.; Shah, N.J.

2013-01-01

The new hybrid imaging technology of MR-PET allows for simultaneous acquisition of versatile MRI contrasts and the quantitative metabolic imaging with PET. In order to achieve the quantification of PET images with minimal residual error the application of several corrections is crucial. In this work we present our results on quantification with the 3T MR BrainPET scanner

Hot Roll Bonding of Aluminum to Twin-Roll Cast (TRC) Magnesium and Its Subsequent Deformation Behavior

Science.gov (United States)

Saleh, H.; Schmidtchen, M.; Kawalla, R.

2018-02-01

In an experiment in which twin-roll cast AZ31 magnesium alloy and commercial purity aluminum (AA 1050) sheets were bonded by hot rolling as Al/Mg/Al laminate composites, it was found that increasing the preheating temperatures up to 400 °C enhances the bonding strength of composites. Further increases in the preheating temperatures accelerate the magnesium oxide growth and thus reduce the bonding strength. The influence of the reduction ratio on the bonding properties was also studied, whereby it was observed that increasing the rolling reduction led to an increase in the bonding strength. The experimental results show that the optimum bonding strength can be obtained at rolling temperatures of 375-400 °C with a 50-60% reduction in thickness. On the other hand, the subsequent deformation behavior of composite was assessed using plane strain compression and deep drawing tests. We demonstrate that the composites produced using the optimum roll bonding conditions exhibited sufficient bonding during subsequent deformation and did not reveal any debonding at the bonding interface.

Brain PET scan

Science.gov (United States)

... results on a PET scan. Blood sugar or insulin levels may affect the test results in people with diabetes . PET scans may be done along with a CT scan. This combination scan is called a PET/CT. Alternative Names Brain positron emission tomography; PET scan - brain References Chernecky ...

Rolling up a Graphene Sheet

NARCIS (Netherlands)

Calvaresi, Matteo; Quintana, Mildred; Rudolf, Petra; Zerbetto, Francesco; Prato, Maurizio

2013-01-01

Carbon Nanotubes, CNTs, have been described as rolled-up graphene layers. Matching this concept to experiments has been a great experimental challenge for it requires a method to exfoliate graphite, generate ordered and stable dangling carbon bonds, and roll up the layer without affecting the

Clinical PET application

Energy Technology Data Exchange (ETDEWEB)

Lim, Sang Moo; Hong, Song W.; Choi, Chang W.; Yang, Seong Dae [Korea Cancer Center Hospital, Seoul (Korea)

1997-12-01

PET gives various methabolic images, and is very important, new diagnostic modality in clinical oncology. In Korea Cancer Center Hospital, PET is installed as a research tool of long-mid-term atomic research project. For the efficient use of PET for clinical and research projects, income from the patients should be managed to get the raw material, equipment, manpower, and also for the clinical PET research. 1. Support the clinical application of PET in oncology. 2. Budgetary management of income, costs for raw material, equipment, manpower, and the clinical PET research project. In this year, 250 cases of PET images were obtained, which resulted total income of 180,000,000 won. 50,000,000 won was deposited for the 1998 PET clinical research. Second year PET clinical research should be managed under unified project. Increased demand for {sup 18}FDG in and outside KCCH need more than 2 times production of {sup 18}FDG in a day purchase of HPLC pump and {sup 68}Ga pin source which was delayed due to economic crisis, should be done early in 1998. (author). 2 figs., 3 tabs.

Roll bonding of strained aluminium

DEFF Research Database (Denmark)

Staun, Jakob M.

2003-01-01

This report investigates roll bonding of pre-strained (å ~ 4) aluminium sheets to produce high strain material from high purity aluminium (99.996%) and commercial pure aluminium (99.6%). The degree of bonding is investigated by optical microscopy and ultrasonic scanning. Under the right...... of the cross rolled volume fraction is found. To further asses this effect, and the anisotropy, it is necessary to acquire knowledge about both texture and microstructure, e.g. by TEM. Roll bonding of pre-strained aluminium is found to be a possible alternative to ARB in the quest for ultra-fine grained...

Zweifache Marginalisierung. Über das Verhältnis von Geschlecht, Politik und Geschichtswissenschaft im 20. Jahrhundert Double Marginalization. On the Relationship between Gender, Politics, and History in the 20th Century

Directory of Open Access Journals (Sweden)

Andreas Schneider

2008-03-01

Full Text Available In ihrer Dissertation untersucht Heike Anke Berger die bislang in der Historiographiegeschichte deutlich vernachlässigte Kategorie Geschlecht. Sie nähert sich der Frage nach deren Rolle im Zusammenspiel mit Politik und Wissenschaft durch einen biographischen Zugriff. Anhand von Fallbeispielen zeigt die Autorin auf, in welchem Maße historische Praxis von geschlechtersegregierenden und -hierarchisierenden Formen der Arbeitsteilung sowie spezifisch männlich besetzten Vorstellungen des „Historikers“ beeinflusst war.In her dissertation, Anke Berger examines the category of gender in historiography, which until now has been noticeably neglected. She accesses the question of its role in the interplay between politics and science through a biographical approach. The author uses case studies to point to the extent to which historical practice was influenced by gender-segregated and hierarchical forms of the division of labor as well as a specifically male-oriented understanding of “historians”.

14 CFR 23.493 - Braked roll conditions.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Braked roll conditions. 23.493 Section 23.493 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT....493 Braked roll conditions. Under braked roll conditions, with the shock absorbers and tires in their...

Diffusion von Leerstelleninseln auf Cu(111)

NARCIS (Netherlands)

Verheij, Laurens K.; Schlößer, Dietmar; Rosenfeld, Georg

1998-01-01

Die zufällige Bewegung von Leerstelleninseln wurde bisher vorwiegend in einem Bild beschrieben, das von der Diffusion einzelner Atome ausgeht. In diesem Bild kann man Inseldiffusion durch die Einstein-Beziehung für Brownsche Bewegung ((Δ r)2 = 4 D Δ t) beschreiben. Für die Diffusionskonstante D wird

[Heinz von zur Mühlen. Das Bürgertum Fordert Blut. Ein Bolschewistiches Flugblatt von 1918] / Paul Kaegbein

Index Scriptorium Estoniae

Kaegbein, Paul

2007-01-01

Arvustus: Heinz von zur Mühlen. Das Bürgertum Fordert Blut. Ein Bolschewistiches Flugblatt von 1918. In : Ostseeprovinzen, baltische Staaten und das Nationale. Münster : LIT, 2005, lk. 403-414. 1918. aastast pärit lendlehest, mille käekirja järgi otsustades on kirjutanud Viktor Kingissepp

PET and PET/CT in oncology: the key of diagnostic challenge

International Nuclear Information System (INIS)

Mortelmans, L.; Stroobants, S.; Spaepen, K.

2004-01-01

In this presentation authors present use of positron emission tomography (PET) in oncology. This lecture is divided to the following parts: (1) Assessment of treatment response; (2) Treatment monitoring by PET: clinical examples; (3) PET for early response assessment; (4) Use of PET in Radiotherapy planning

'PET -Compton' system. Comparative evaluation with PET system using Monte Carlo simulation

International Nuclear Information System (INIS)

Diaz Garcia, Angelina; Arista Romeu, Eduardo; Abreu Alfonso, Yamiel; Leyva Fabelo, Antonio; Pinnera Hernandez, Ibrahin; Bolannos Perez, Lourdes; Rubio Rodriguez, Juan A; Perez Morales, Jose M.; Arce Dubois, Pedro; Vela Morales, Oscar; Willmott Zappacosta, Carlos

2011-01-01

Positron Emission Tomography (PET) in small animals has actually achieved spatial resolution round about 1 mm and currently there are under study different approaches to improve this spatial resolution. One of them combines PET technology with Compton Cameras. This paper presents the idea of the so called 'PET-Compton' systems and includes comparative evaluation of spatial resolution and global efficiency in both PET and PET-Compton system by means of Monte Carlo simulations using Geant4 code. Simulation is done on a PET-Compton system consisting of LYSO-LuYAP scintillating detectors of particular small animal PET scanner named 'Clear-PET' and for Compton detectors based on CdZnTe semiconductor. A group of radionuclides that emits a positron (e + ) and γ quantum almost simultaneously and fulfills some selection criteria for their possible use in PET-Compton systems for medical and biological applications were studied under simulation conditions. (Author)

An advanced dissymmetric rolling model for online regulation

Science.gov (United States)

Cao, Trong-Son

2017-10-01

Roll-bite model is employed to predict the rolling force, torque as well as to estimate the forward slip for preset or online regulation at industrial rolling mills. The rolling process is often dissymmetric in terms of work-rolls rotation speeds and diameters as well as the friction conditions at upper and lower contact surfaces between work-rolls and the strip. The roll-bite model thus must be able to account for these dissymmetries and in the same time has to be accurate and fast enough for online applications. In the present study, a new method, namely Adapted Discretization Slab Method (ADSM) is proposed to obtain a robust roll-bite model, which can take into account the aforementioned dissymmetries and has a very short response time, lower than one millisecond. This model is based on the slab method, with an adaptive discretization and a global Newton-Raphson procedure to improve the convergence speed. The model was validated by comparing with other dissymmetric models proposed in the literature, as well as Finite Element simulations and industrial pilot trials. Furthermore, back-calculation tool was also constructed for friction management for both offline and online applications. With very short CPU time, the ADSM-based model is thus attractive for all online applications, both for cold and hot rolling.

LEDs are on a roll

NARCIS (Netherlands)

Blom, P.W.M.; Mol, A.M.B. van

2011-01-01

Light-emitting diodes are more efficient than conventional lighting, but high production costs limit their uptake. Organic versions that can be produced using a cheap newspaper-style 'roll-to-roll' printing process are likely to revolutionize our lighting and signage, say Paul Blom and Ton van Mol.

14 CFR 27.493 - Braked roll conditions.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Braked roll conditions. 27.493 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements Ground Loads § 27.493 Braked roll conditions. Under braked roll conditions with the shock absorbers in their static positions— (a) The limit...

14 CFR 29.493 - Braked roll conditions.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Braked roll conditions. 29.493 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Strength Requirements Ground Loads § 29.493 Braked roll conditions. Under braked roll conditions with the shock absorbers in their static positions— (a) The limit...

PET-COMPTON System. Comparative evaluation with PET System using Monte Carlo Simulation

International Nuclear Information System (INIS)

Diaz Garcia, Angelina; Arista Romeu, Eduardo; Abreu Alfonso, Yamiel; Leyva Fabelo, Antonio; Pinnera HernAndez, Ibrahin; Bolannos Perez, Lourdes; Rubio Rodriguez, Juan A.; Perez Morales, Jose M.; Arce Dubois, Pedro; Vela Morales, Oscar; Willmott Zappacosta, Carlos

2012-01-01

Positron Emission Tomography (PET) in small animals has actually achieved spatial resolution round about 1 mm and currently there are under study different approaches to improve this spatial resolution. One of them combines PET technology with Compton Cameras. This paper presents the idea of the so called PET-Compton systems and has included comparative evaluation of spatial resolution and global efficiency in both PET and PET-Compton system by means of Monte Carlo simulations using Geant4 code. Simulation was done on a PET-Compton system made-up of LYSO-LuYAP scintillating detectors of particular small animal PET scanner named Clear-PET and for Compton detectors based on CdZnTe semiconductor. A group of radionuclides that emits a positron (e+) and quantum almost simultaneously and fulfills some selection criteria for their possible use in PET-Compton systems for medical and biological applications were studied under simulation conditions. By means of analytical reconstruction using SSRB (Single Slide Rebinning) method were obtained superior spatial resolution in PET-Compton system for all tested radionuclides (reaching sub-millimeter values of for 22Na source). However this analysis done by simulation have shown limited global efficiency values in PET-Compton system (in the order of 10 -5 -10 -6 %) instead of values around 5*10 -1 % that have been achieved in PET system. (author)

Roll-to-Roll Slot–Die Coated Organic Photovoltaic (OPV) Modules with High Geometrical Fill Factors

NARCIS (Netherlands)

Galagan, Y.; Fledderus, H.; Gorter, H.; Mannetje, H.H. 't; Shanmugam, S.; Mandamparambil, R.; Bosman, J.; Rubingh, J.M.; Teunissen, J.P.; Salem, A.; Vries, I.G. de; Andriessen, R.; Groen, W.A.

2015-01-01

Flexible semi-transparent organic photovoltaic (OPV) modules were manufactured by roll-to-roll slot–die coating of three functional layers [ZnO, photoactive layer, and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)] and either the screen printing or inkjet printing of the top

ICLIPS - integrated assessment of climate protection strategies. Final report; ICLIPS - Integrierte Abschaetzung von Klimaschutzstrategien. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Toth, F.L.; Bruckner, T.; Fuessel, H.M.

2000-12-01

Klimaschutzstrategien explizit sowohl oekologische als auch oekonomische Anforderungen zu beruecksichtigen vermag, erfuellt zentrale forschungspolitische Ziele in bezug auf den Fragenkomplex 'Nachhaltiges Wachstum'. Innerhalb des Projektzeitraums konnte im Rahmen einer erfolgreichen internationalen Kooperation mit dem ICLIPS-Modell ein detailliertes integriertes Modell des globalen Klimawandels ('Integrated Assessment Model', IAM) erstellt werden. Damit ist es der deutschen Klimafolgenforschung gelungen, in diesem fuer die praktische Politikberatung wichtigen Forschungsfeld Anschluss an die internationale Entwicklung zu finden und in wichtigen Teilbereichen eine fuehrende Rolle zu uebernehmen. Das ICLIPS-Modell enthaelt eine Reihe von Innovationen, die es von anderen intertemporal optimierenden Modellen absetzt. Erwaehnenswert sind hierbei unter anderem ein numerisch hoechst effizientes Klimamodell, das alle relevanten Treibhausgase beruecksichtigt, eine Vielzahl von Klimawirkungsfunktionen ('Climate Impact Response Functions', CIRFs), die klimabedingte Veraenderungen der natuerlichen Vegetation, der landwirtschaftlichen Ertraege und der Wasserverfuegbarkeit beschreiben sowie ein Modell der langfristigen oekonomischen Entwicklung, das erstmalig kostendaempfende Effekte des technologischen Lernens mit einbezieht. (orig.)

Effect of skin pass rolling reduction rate on the texture evolution of a non-oriented electrical steel after inclined cold rolling

Energy Technology Data Exchange (ETDEWEB)

Mehdi, Mehdi [CanmetMATERIALS, Natural Resources Canada, Hamilton, ON L8P 0A5 (Canada); Department of Mechanical, Automotive, and Materials Engineering, University of Windsor, Windsor, ON N9B 3P4 (Canada); He, Youliang, E-mail: youliang.he@canada.ca [CanmetMATERIALS, Natural Resources Canada, Hamilton, ON L8P 0A5 (Canada); Hilinski, Erik J. [Tempel Steel Co., Chicago, IL 60640-1020 (United States); Edrisy, Afsaneh [Department of Mechanical, Automotive, and Materials Engineering, University of Windsor, Windsor, ON N9B 3P4 (Canada)

2017-05-01

In order to promote the magnetically favourable <001>//ND texture (θ-fibre) and minimize the unfavourable <111>//ND fibre (γ-fibre) in non-oriented electrical steel, an unconventional cold rolling scheme was employed in this study, in which the cold rolling was carried out at an angle (i.e. 30°, 45°, 60°, and 90°) to the hot rolling direction (HRD). After annealing, two steel sheets (i.e. those after cold rolling at 60° and 45° to the HRD) were found to have considerably different textures from other sheets, i.e. showing the strongest and the weakest θ-fibre textures, respectively. These two sheets were then subjected to skin pass rolling to various reduction rates from 5–20% to investigate the effect of rolling reduction on the evolution of texture. It was found that during skin pass rolling, the cube texture ({001}<100>) was gradually weakened and the rotated cube orientation ({001}<110>) was strengthened. With the increase of the reduction rate, the {112}<110> orientation on the α-fibre became a major component. Upon final annealing, the cube texture was slightly restored, but the volume fraction was considerably lower than that before skin pass rolling. - Highlights: • Inclined cold rolling optimizes the textures of non-oriented electrical steels. • A 60° angle to the hot rolling direction results in the largest improvement of the favorable texture. • Skin pass rolling weakens the cube texture and promotes the {112}<110> texture. • Final annealing restores some of the cube texture and strengthens the rotated cube texture. • Low Taylor factor of the cube orientation leads to its easy deformation in skin pass rolling.

Pharmakobotanische Untersuchungen von Lavendelsorten auf dem Plattensee- Plateau

Directory of Open Access Journals (Sweden)

Tóth, Frida

2014-09-01

Full Text Available Auf dem Hof Dörgicsei Levendula Major GmbH wurden 9 Lavendelsorten (6 Sorten von Lavandula angustifolia und 3 Sorten von Lavandula x intermedia untersucht. Neben den morphologischen und Wachstumseigenschaften wurden auch Frisch- und Trockengewichte bewertet. Quantitative und qualitative Untersuchungen von den Blüten- und Ätherischöldrogen wurden auch durchgeführt. Die statistische Analyse zeigte signifikant höhere Erträge bei den Sorten L. angustifolia ’Essence Purple’ und L. x intermedia ’Edelweiss’. Gehalt und Zusammensetzung von ätherischem Öl war eindeutig bei der Sorte L. angustifolia ’Ellagance Purple’ am günstigsten.

Speziation von Gadolinium-MRT-Kontrastmitteln in Umweltmatrizes

OpenAIRE

Lindner, Uwe

2017-01-01

Gd-Kontrastmittel werden in der Medizin für die Magnetresonanztomographie (MRT) benötigt, um einen besseren Bildkontrast zu erzielen. Nach der Anwendung gelangen diese Arzneimittel über das Abwasser in die Klärwerke und von dort in die jeweiligen anliegenden Oberflächengewässer. Somit wird es notwendig, den Verbleib der Gd-MRT-Kontrastmittel in der Umwelt zu verfolgen und aufzuklären. In dieser Arbeit werden für die Analyse von Umweltproben Methoden zur Speziesanalytik von Gd-Kontrastmitteln ...

Study of deformation texture in an AZ31 magnesium alloy rolled at wide range of rolling speed and reductions

International Nuclear Information System (INIS)

Sanjari, M; Su, J; Kabir, A S; Yue, S; Tamimi, S; Hara, K; Utsunomiya, H; Petrov, R; Kestens, L

2015-01-01

The plasticity of Mg is restricted at low temperatures because: (a) only a small number of deformation mechanisms can be activated, and (b) a preferred crystallographic orientation (texture) develops in wrought alloys, especially in flat-rolled sheets. This causes problems in thin sheet processing as well as component manufacturing from the sheet. In this study, different rolling speeds from 15 to 1000 m/min were employed to warm-roll AZ31B magnesium alloy to different reductions. The results show that AZ31B sheets rolled at 15 m/min and 100 °C has fractured for reductions of more than 30% per pass. However, by increasing the rolling speed to 1000 m/min the rollability was improved significantly and the material can be rolled to reductions of more than 70% per pass. The results show that with increasing strain rate at 100°C, the splitting of basal poles was observed, indicating the activation of more contraction twins and secondary twins. (paper)

Rudder roll stabilization for ships

NARCIS (Netherlands)

van Amerongen, J.; van der Klugt, P.G.M.; van Nauta lemke, H.R.

1990-01-01

This paper describes the design of an autopilot for rudder roll stabilization for ships. This autopilot uses the rudder not only for course keeping but also for reduction of the roll. The system has a series of properties which make the controller design far from straightforward: the process has

Comparison of dosimetry between PET/CT and PET alone using 11C-ITMM

International Nuclear Information System (INIS)

Ito, Kimiteru; Sakata, Muneyuki; Wagarsuma, Kei; Toyohara, Jun; Ishibashi, Kenji; Ishii, Kenji; Ishiwata, Kiichi; Oda, Keiichi

2016-01-01

We used a new tracer, N-[4-[6-(isopropylamino) pyrimidin-4-yl]-1,3-thiazol-2-yl]-4- 11 C-methoxy-N-methylbenzamide ( 11 C-ITMM), to compare radiation doses from positron emission tomography (PET)/computed tomography (CT) with previously published doses from PET alone. Twelve healthy volunteers [six males (mean age ± SD, 27.7 ± 6.7 years) and six females (31.8 ± 14.5 years)] in 12 examinations were recruited. Dose estimations from PET/CT were compared with those from PET alone. Regions of interest (ROIs) in PET/CT were delineated on the basis of low-dose CT (LD-CT) images acquired during PET/CT. Internal and external radiation doses were estimated using OLINDA/EXM 1.0 and CT-Expo software. The effective dose (ED) for 11 C-ITMM calculated from PET/CT was estimated to be 4.7 ± 0.5 μSv/MBq for the male subjects and 4.1 ± 0.7 μSv/MBq for the female subjects. The mean ED for 11 C-ITMM calculated from PET alone in a previous report was estimated to be 4.6 ± 0.3 μSv/MBq (males, n = 3). The ED values for 11 C-ITMM calculated from PET/CT in the male subjects were almost identical to those from PET alone. The absorbed doses (ADs) of the gallbladder, stomach, red bone marrow, and spleen calculated from PET/CT were significantly different from those calculated from PET alone. The EDs of 11 C-ITMM calculated from PET/CT were almost identical to those calculated from PET alone. The ADs in several organs calculated from PET/CT differed from those from PET alone. LD-CT images acquired during PET/CT may facilitate organ identification.

Additional value of PET-CT in the staging of lung cancer: comparison with CT alone, PET alone and visual correlation of PET and CT

International Nuclear Information System (INIS)

Wever, W. de; Marchal, G.; Bogaert, J.; Verschakelen, J.A.; Ceyssens, S.; Mortelmans, L.; Stroobants, S.

2007-01-01

Integrated positron emission tomography (PET) and computed tomography (CT) is a new imaging modality offering anatomic and metabolic information. The purpose was to evaluate retrospectively the accuracy of integrated PET-CT in the staging of a suggestive lung lesion, comparing this with the accuracy of CT alone, PET alone and visually correlated PET-CT. Fifty patients undergoing integrated PET-CT for staging of a suggestive lung lesion were studied. Their tumor, node, metastasis (TNM) statuses were determined with CT, PET, visually correlated PET-CT and integrated PET-CT. These TNM stages were compared with the surgical TNM status. Integrated PET-CT was the most accurate imaging technique in the assessment of the TNM status. Integrated PET-CT predicted correctly the T status, N status, M status and TNM status in, respectively, 86%, 80%, 98%, 70% versus 68%, 66%,88%, 46% with CT, 46%, 70%, 96%, 30% with PET and 72%, 68%, 96%, 54% with visually correlated PET-CT. T status and N status were overstaged, respectively, in 8% and 16% with integrated PET-CT, in 20% and 28% with CT, in 16% and 20% with PET, in 12% and 20% with visually correlated PET-CT and understaged in 6% and 4% with integrated PET-CT, versus 12% and 6% with CT, 38% and 10% with PET and 12% with visually correlated PET-CT. Integrated PET-CT improves the staging of lung cancer through a better anatomic localization and characterization of lesions and is superior to CT alone and PET alone. If this technique is not available, visual correlation of PET and CT can be a valuable alternative. (orig.)

Pet-Related Infections.

Science.gov (United States)

Day, Michael J

2016-11-15

Physicians and veterinarians have many opportunities to partner in promoting the well-being of people and their pets, especially by addressing zoonotic diseases that may be transmitted between a pet and a human family member. Common cutaneous pet-acquired zoonoses are dermatophytosis (ringworm) and sarcoptic mange (scabies), which are both readily treated. Toxoplasmosis can be acquired from exposure to cat feces, but appropriate hygienic measures can minimize the risk to pregnant women. Persons who work with animals are at increased risk of acquiring bartonellosis (e.g., cat-scratch disease); control of cat fleas is essential to minimize the risk of these infections. People and their pets share a range of tick-borne diseases, and exposure risk can be minimized with use of tick repellent, prompt tick removal, and appropriate tick control measures for pets. Pets such as reptiles, amphibians, and backyard poultry pose a risk of transmitting Salmonella species and are becoming more popular. Personal hygiene after interacting with these pets is crucial to prevent Salmonella infections. Leptospirosis is more often acquired from wildlife than infected dogs, but at-risk dogs can be protected with vaccination. The clinical history in the primary care office should routinely include questions about pets and occupational or other exposure to pet animals. Control and prevention of zoonoses are best achieved by enhancing communication between physicians and veterinarians to ensure patients know the risks of and how to prevent zoonoses in themselves, their pets, and other people.

Spectral theory and quotients in Von Neumann algebras | West ...

African Journals Online (AJOL)

In this note we consider to what extent the functional calculus and the spectral theory in von Neumann algebras are preserved by the taking of quotients relative to two-sided ideals of the von Neumann algebra. Keywords:von Neumann algebra, functional calculus, spectral theory, quotient algebras. Quaestiones ...

PET and PET-CT. State of the art and future prospects

International Nuclear Information System (INIS)

Fanti, Stefano; Franchi, Roberto; Battista, Giuseppe; Monetti, Nino; Canini, Romeo

2005-01-01

Fluoro-deoxyglucose positron emission tomography (FDG PET) enables the in vivo study of tissue metabolism, and thus is able to identify malignant tumours as hypermetabolic lesions by an increase in tracer uptake. Many papers have demonstrated both the relevant impact of FDG PET on staging of many cancers and the superior accuracy of the technique compared with conventional diagnostic methods for pre-treatment evaluation, therapy response evaluation and relapse identification. In particular PET was found useful in identifying lymph nodal and metastatic spread. thus altering patient management in more than 30% of cases. PET images, however, provide limited anatomical data, which in regions such as the head and neck, mediastinum and pelvic cavity is a significant drawback. The exact localization of lesions may also be difficult in some cases, on the basis of PET images alone. The introduction of combined PET-computed tomography (PET-CT) scanners enables the almost simultaneous acquisition of transmission and emission images, thus obtaining optimal fusion images in a very short time. PET-CT fusion images enable lesions to be located, reducing false positive studies and increasing accuracy; the overall duration of examination may also be reduced. On the basis of both literature data and our experience we established the clinical indications when PET-CT may be particularly useful, in comparison with PET alone. It should also be underlined that the use of PET-CT is almost mandatory for new traces such as C-choline and C-methionine; these new tracers may be applied for studying tumours not assessable with FDG, such as prostate cancer. In conclusion PET-CT is at present the most advanced method for metabolic imaging, and is capable of precisely localizing and assessing tumours; fusion images reduce false positive and inconclusive studies, thus increasing diagnostic accuracy [it

Look! It's Rock'n'roll!

DEFF Research Database (Denmark)

Lindelof, Anja

2007-01-01

, and dates. Consult your library or click here for more information on citing sources. -------------------------------------------------------------------------------- Anja Mølle Lindelof. (2007). Look! it's rock'n'roll! how television participated in shaping the visual genre conventions of popular music...... to personal names, capitalization, and dates. Consult your library or click here for more information on citing sources. -------------------------------------------------------------------------------- Anja Mølle Lindelof. "Look! It's Rock'n'roll! How television participated in shaping the visual genre....... Pay special attention to personal names, capitalization, and dates. Consult your library or click here for more information on citing sources. -------------------------------------------------------------------------------- TY - JOUR T1 - Look! It's Rock'n'roll! How television participated in shaping...

f(R) constant-roll inflation

Energy Technology Data Exchange (ETDEWEB)

Motohashi, Hayato [Universidad de Valencia-CSIC, Instituto de Fisica Corpuscular (IFIC), Valencia (Spain); Starobinsky, Alexei A. [L.D. Landau Institute for Theoretical Physics, RAS, Moscow (Russian Federation); National Research University Higher School of Economics, Moscow (Russian Federation)

2017-08-15

The previously introduced class of two-parametric phenomenological inflationary models in general relativity in which the slow-roll assumption is replaced by the more general, constant-roll condition is generalized to the case of f(R) gravity. A simple constant-roll condition is defined in the original Jordan frame, and exact expressions for a scalaron potential in the Einstein frame, for a function f(R) (in the parametric form) and for inflationary dynamics are obtained. The region of the model parameters permitted by the latest observational constraints on the scalar spectral index and the tensor-to-scalar ratio of primordial metric perturbations generated during inflation is determined. (orig.)

Development of PET insert for simultaneous PET/MR imaging of human brain

Energy Technology Data Exchange (ETDEWEB)

Jung, Jiwoong; Choi, Yong; Jung, Jin Ho; Kim, Sangsu; Im, Ki Chun; Lim, Hyun Keong [Molecular Imaging Research & Education (MiRe) Laboratory, Department of Electronic Engineering, Sogang University, Seoul (Korea, Republic of); Oh, Changheun; Park, HyunWook; Cho, Gyuseong [Departments of Electrical Engineering and Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon (Korea, Republic of)

2014-07-29

Recently, there has been great interest on the development of combined PET/MR, which is a useful tool for both functional and anatomic imaging. The purpose of this study was to develop a MR compatible PET insert for simultaneous PET and MR imaging of human brain and to evaluate the performance of the hybrid PET-MRI. The PET insert consisted of 18 detector blocks arranged in a ring of 390 mm diameter with 60 mm axial FOV. Each detector block was composed of 4 × 4 matrix of detector modules, each of which consisted of a 4 × 4 array LYSO coupled to a 4 × 4 GAPD array. The PET gantry was shielded with gold-plated conductive fabric tapes. The charge signals of PET detector transferred via 4 m long flat cables were fed into the position decoder circuits (PDCs) and then transferred to FPGA-embedded DAQ modules. The PDCs and DAQ modules were enclosed in an aluminum box and located at the rear of the MR bore inside MRI room. 3-T human MRIs of two different vendors were used to evaluate the MR compatibility of developed PET insert. No significant changes of the PET performance and the homogeneity of MR images caused by the non-compatibility of PET-MRI were observed with the 2 different MRIs. The signal intensities of MR images were slightly degraded (<3.6%) with the both MRI systems. The difference between independently and simultaneously acquired PET images of brain phantom was negligibly small (<4.3%). High quality simultaneous brain PET and MRI of 3 normal volunteers were successfully acquired. Experimental results indicate that the high performance compact and lightweight PET insert for hybrid PET/MRI, which could be utilized with the MRI from various manufactures, can be developed using GAPD arrays and charge signal transmission method proposed in this study.

[Albert Reder Ritter von Schellmann (1826-1904)].

Science.gov (United States)

Schmidt, G; Holubar, K

1990-01-01

Albert Reder von Schellmann (1826-1904) was an important syphilidologist of the Vienna Medical School in the second half of the nineteenth century. He went in for the dualistic concept of the origin of syphilis and ulcer caused by soft chancre. In 1870 - Reder became head of a third dermato-syphilidologic department in the "Josephinum" in Vienna, where military surgeons got their medical education. At the same time the two full professorships of dermatosyphilidology in the Vienna General Hospital were held by Ferdinand von Hebra (1816-1880) and Carl Ludwig Sigmund von Ilanor (1810-1883).

Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

NARCIS (Netherlands)

Rentrop, C.; Rubingh, J.E.J.M.; Lelieveld, R.; Sandberg, H.

2014-01-01

The ROPAS project (Roll-to-roll paper sensors) combines high end electronics and wireless sensors with low cost paper substrates and processing techniques that can be applied on a large scale. Paper is the next step in the printed electronics roadmap of utilising cheaper substrate materials as a

PET/MRI and PET/CT in advanced gynaecological tumours: initial experience and comparison

Energy Technology Data Exchange (ETDEWEB)

Queiroz, Marcelo A.; Schulthess, Gustav von; Veit-Haibach, Patrick [University Hospital Zurich, Department Medical Radiology, Nuclear Medicine, Zurich (Switzerland); University Hospital Zurich, Department Medical Radiology, Diagnostic and Interventional Radiology, Zurich (Switzerland); University of Zurich, Zurich (Switzerland); Kubik-Huch, Rahel A.; Freiwald-Chilla, Bianka [Kantonsspital Baden AG, Department of Radiology, Baden (Switzerland); Hauser, Nik [Kantonsspital Baden AG, Department of Gynaecology, Baden (Switzerland); Froehlich, Johannes M. [Guerbet AG, Zurich (Switzerland)

2015-08-15

To compare the diagnostic accuracy of PET/MRI and PET/CT for staging and re-staging advanced gynaecological cancer patients as well as identify the potential benefits of each method in such a population. Twenty-six patients with suspicious or proven advanced gynaecological cancer (12 ovarian, seven cervical, one vulvar and four endometrial tumours, one uterine metastasis, and one primary peritoneal cancer) underwent whole-body imaging with a sequential trimodality PET/CT/MR system. Images were analysed regarding primary tumour detection and delineation, loco-regional lymph node staging, and abdominal/extra-abdominal distant metastasis detection (last only by PET/CT). Eighteen (69.2 %) patients underwent PET/MRI for primary staging and eight patients (30.8 %) for re-staging their gynaecological malignancies. For primary tumour delineation, PET/MRI accuracy was statistically superior to PET/CT (p < 0.001). Among the different types of cancer, PET/MRI presented better tumour delineation mainly for cervical (6/7) and endometrial (2/3) cancers. PET/MRI for local evaluation as well as PET/CT for extra-abdominal metastases had therapeutic consequences in three and one patients, respectively. PET/CT detected 12 extra-abdominal distant metastases in 26 patients. PET/MRI is superior to PET/CT for primary tumour delineation. No differences were found in detection of regional lymph node involvement and abdominal metastases detection. (orig.)

Comparative analysis of PET/CT and PET/MR image characteristics of head and neck squamous cell carcinoma%对比分析头颈部鳞状细胞癌PET/CT与PET/MR特征

Institute of Scientific and Technical Information of China (English)

白乐; 程勇; 唐勇进; 凌雪英

2017-01-01

Objective To investigate PET/CT and PET/MR characteristics of head and neck squamous cell carcinoma (HNSCC).Methods Totally 40 patients with HNSCC underwent whole body 18F-FDG PET/CT and MR scans of head and neck before anti-tumor treatment.PET positive lesions of HNSCC,including primary lesions and lymph nodes were evaluated by 2 radiologists independently.Then the imaging quality,fusion quality,lesion conspicuity and lesion characteristics were assessed based on PET/CT,PET/MR T1WI and PET/MR T2WI.Results Ninety PET positive lesions in all 40patients were evaluated,including 40 primary lesions and 50 lymph nodes.Similar imaging quality and fusion quality of PET/CT,PET/MR T1WI and PET/MR T2WI were obtained without statistical difference (both P＞0.05).For the lesion conspicuity,PET/MR T1WI and PET/MR T2WI demonstrated significantly better than PET/CT in positive primary lesions and lymph nodes (all P＜0.05).For the characteristics of positive primary lesions,PET/MR T2WI provided more information than PET/CT in 29 lesions,equal to PET/CT in 4 lesions,and less than PET/CT in 7 lesions.Conclusion The application of PET/MR in HNSCC is feasible,being superior to PET/CT in indication of lesions in head and neck area.%目的 探讨头颈部鳞状细胞癌(HNSCC)的PET/CT及PET/MR特征.方法 纳入未经抗肿瘤治疗的头颈部鳞状细胞癌患者40例,所有患者均接受PET/CT及头颈部MR检查.由2名观察者独立观察PET阳性病灶,包括阳性原发灶及阳性淋巴结;并对PET/CT、PET/MR T1WI及PET/MR T2WI的图像质量、融合准确度、病灶清晰度、病灶特征等进行评分.分析2名观察者间的一致性.结果 40例患者共90个PET阳性病灶,包括阳性原发灶40个、阳性淋巴结50个.PET/CT、PET/MR T1WI及PET/MR T2WI在图像质量及融合准确度方面差异均无统计学意义(P均＞0.05);在显示阳性原发灶及阳性淋巴结的清晰度方面,PET/MR T1WI及PET/MR T2WI均优于PET/CT(P均＜0.05).40个阳性原发灶中,PET

Present and future of PET and PET/CT in gynaecologic malignancies

International Nuclear Information System (INIS)

Musto, Alessandra; Rampin, Lucia; Nanni, Cristina; Marzola, Maria Cristina; Fanti, Stefano; Rubello, Domenico

2011-01-01

Objectives: To review the published data in literature on patients affected by gynaecological malignancies to establish the role of 18 F-FDG positron emission tomography (PET) and PET/CT in comparison to conventional imaging (CI). Materials and methods: All papers specifically addressed to the role of 18 F-FDG PET and PET/CT in gynaecological malignancies published on PubMed/Medline, in abstracts from the principal international congresses, in the guidelines from national Societies that had appeared in literature until November 2009 were considered for the purpose of the present study. Results and conclusions: The use of 18 F-FDG PET, and even more of 18 F-FDG PET/CT, is increasing in the follow up of patients with gynaecologic malignancies and suspected recurrent disease: there is evidence in the literature that 18 F-FDG PET/CT has a higher sensitivity than CI in depicting occult metastatic spread. An interesting issue is represented by patients with ovarian cancer with an increase of the specific biomarker, CA-125, and negative/inconclusive findings at CI. The use of 18 F-FDG PET in differential diagnosis and staging is more controversial, but there is some evidence that a baseline PET examination performed before commencing therapy, for staging purpose, is also useful to evaluate the response to chemoradiation treatment. In several papers it has been suggested a relevant role of 18 F-FDG PET/CT in evaluating the entity of response to treatment and therefore to plan the subsequent therapeutic strategy.

Thermal Characteristics of Plastic Film Tension in Roll-to-Roll Gravure Printed Electronics

Directory of Open Access Journals (Sweden)

Kui He

2018-02-01

Full Text Available In the printing section of a roll-to-roll gravure printed electronics machine, the plastic film tension is directly associated with the product quality. The temperature distribution of the plastic film in the printing section is non-uniform, because of the higher drying temperature and the lower room temperature. Furthermore, the drying temperature and the room temperature are not constants in industrial production. As the plastic film is sensitive to temperature, the temperature of the plastic film will affects the web tension in the printing section. In this paper, the thermal characteristics of the plastic film tension in roll-to-roll gravure printed electronics are studied in order to help to improve the product quality. First, the tension model including the factor of temperature is derived based on the law of mass conservation. Then, some simulations and experiments are carried out in order to in-depth research the effects of the drying temperature and room temperature based on the relations between system inputs and outputs. The results show that the drying temperature and room temperature have significant influences on the web tension. The research on the thermal characteristics of plastic film tension would benefit the tension control accuracy for further study.

Das Geschäftsmodell von Retail Banken im Wandel der Digitalisierung

OpenAIRE

Messikommer, Cédric

2016-01-01

Der Prozess der Digitalisierung führt in unterschiedlichen Branchen zu tiefgreifenden Veränderungen. Dazu gehört auch der Finanzsektor, dessen Umfeld von erodierenden Margen und Tiefstzinsen geprägt ist. Die Digitalisierung hat weitreichende Auswirkungen auf die Geschäftsmodelle von Banken und speziell von Retail Banken. Deren Basisdienstleistungen werden zunehmend von neuen Mitbewerbern mit modernster Internet-Technologie angeboten. Damit sind wesentliche Teile der Wertschöpfungskette von Re...

The theory and technique of yamuna body rolling.

Science.gov (United States)

Suzuki, Satoshi

2013-09-01

[Purpose] This paper provides information about the theory and technique of Yamuna Body Rolling. In order to treat physical problems, using the specialized Yamuna Body Rolling balls, people can target superficial skin, fasciae, muscle fibers, tendons, ligaments, bones, internal organs, and the nervous system by themselves. The extraordinary effect of Yamuna Body Rolling is its multidimensional elongation of muscle fibers. In addition to the regular longitudinal elongation by the conventional stretch method, Yamuna Body Rolling enables the transversal and diagonal expansion of muscle fibers in order to move the body more dynamically. Hamstring, abdominal, and sideline routines are presented as examples for techniques of Yamuna Body Rolling. Yamuna Body Rolling can be applied to functional evaluation and therapeutic uses; therefore, it could provide many benefits in the treatment of different conditions in the medical field.

The need for company information manuals - Benefits of industry-wide standard solutions; Notwendigkeit von Betriebshandbuechern - Vorteile von Branchen-Standardloesungen

Energy Technology Data Exchange (ETDEWEB)

Sporleder, R.; Winter, G. [Stadtwerke Rostock AG (Germany)

2000-07-01

The paper explains the need for and the usefulness of company information manuals for companies of the energy sector. (orig./CB) [German] Im folgenden wird anhand von Kernsaetzen die Notwendigkeit von Betriebshandbuechern begruendet. Es wird offensichtlich, dass Geschaeftsfuehrungen von sicherheitsrelevanten Unternehmen wohlberaten sind, die in verschiedenen Vorschriften geforderte betriebliche Umsetzung des Inhalts dieser Vorschriften auf die firmeninternen Organisationsstrukturen vorzunehmen. Diese Umsetzung hilft intern, die betrieblichen Verantwortlichkeiten festzulegen, Verfahrensablaeufe zu bestimmen und erhoeht im Schadensfall erheblich die Chance fuer die jeweilige Geschaeftsfuehrung, den strafrechtlichen Vorwurf des Organisationsverschuldens abzuwehren. (orig./CB)

Using Light-Induced Thermocleavage in a Roll-to-Roll Process for Polymer Solar Cells

DEFF Research Database (Denmark)

Krebs, Frederik C; Norrman, Kion

2010-01-01

We report on the use of intense visible light with a narrow spectral distribution matched to the region where the conjugated polymer material absorbs to selectively heat the active material and induce thermocleavage. We show a full roll-to-roll process, leading to complete large-area polymer solar...... ion mass spectrometry, attenuated total reflectance infrared, and transmission/reflection UV−vis techniques....

Maintenance in Railway Rolling Stock Rescheduling for Passenger Railways

NARCIS (Netherlands)

J.C. Wagenaar (Joris); L.G. Kroon (Leo)

2015-01-01

textabstractThis paper addresses the Rolling Stock Rescheduling Problem (RSRP), while taking maintenance appointments into account. After a disruption, the rolling stock of passenger trains has to be rescheduled in order to maintain a feasible rolling stock circulation. A limited number of rolling

Development of a novel quality assurance system based on rolled-up and rolled-out radiochromic films in volumetric modulated arc therapy

International Nuclear Information System (INIS)

Park, Ji-Yeon; Lee, Jeong-Woo; Choi, Kyoung-Sik; Lee, Jung Seok; Kim, You-Hyun; Hong, Semie; Suh, Tae-Suk

2011-01-01

Purpose: To develop a cylindrical phantom with rolled-up radiochromic films and dose analysis software in the rolled-out plane for quality assurance (QA) in volumetric modulated arc therapy (VMAT). Methods: The phantom consists of an acrylic cylindrical body wrapped with radiochromic film inserted into an outer cylindrical shell of 5 cm thickness. The rolled-up films with high spatial resolution enable detection of specific dose errors along the arc trajectory of continuously irradiated and modulated beams in VMAT. The developed dose analysis software facilitates dosimetric evaluation in the rolled-up and rolled-out planes of the film; the calculated doses on the corresponding points where the rolled-up film was placed were reconstructed into a rectangular dose matrix equivalent to that of the rolled-out plane of the film. The VMAT QA system was implemented in 3 clinical cases of prostate, nasopharynx, and pelvic metastasis. Each calculated dose on the rolled-out plane was compared with measurement values by modified gamma evaluation. Detected positions of dose disagreement on the rolled-out plane were also distinguished in cylindrical coordinates. The frequency of error occurrence and error distribution were summarized in a histogram and in an axial view of rolled-up plane to intuitively identify the corresponding positions of detected errors according to the gantry angle. Results: The dose matrix reconstructed from the developed VMAT QA system was used to verify the measured dose distribution along the arc trajectory. Dose discrepancies were detected on the rolled-out plane and visualized on the calculated dose matrix in cylindrical coordinates. The error histogram obtained by gamma evaluation enabled identification of the specific error frequency at each gantry angular position. The total dose error occurring on the cylindrical surface was in the range of 5%-8% for the 3 cases. Conclusions: The developed system provides a practical and reliable QA method to

Development of a novel quality assurance system based on rolled-up and rolled-out radiochromic films in volumetric modulated arc therapy

Energy Technology Data Exchange (ETDEWEB)

Park, Ji-Yeon; Lee, Jeong-Woo; Choi, Kyoung-Sik; Lee, Jung Seok; Kim, You-Hyun; Hong, Semie; Suh, Tae-Suk [Department of Biomedical Engineering and Research Institute of Biomedical Engineering, College of Medicine, Catholic University of Korea, Seoul 137-701 (Korea, Republic of); Research Institute of Health Science, College of Health Science, Korea University, Seoul 136-703 (Korea, Republic of) and Department of Radiation Oncology, Konkuk University Medical Center, Seoul 143-729 (Korea, Republic of); Department of Radiation Oncology, Anyang SAM Hospital, Anyang 430-733 (Korea, Republic of) and Department of Biomedical Engineering and Research Institute of Biomedical Engineering, College of Medicine, Catholic University of Korea, Seoul 137-701 (Korea, Republic of); Department of Radiation Oncology, Anyang SAM Hospital, Anyang 430-733 (Korea, Republic of); Department of Radiologic Science, College of Health Science, Korea University, Seoul 136-703 (Korea, Republic of); Department of Radiation Oncology, Konkuk University Medical Center, Seoul 143-729 (Korea, Republic of); Department of Biomedical Engineering and Research Institute of Biomedical Engineering, College of Medicine, Catholic University of Korea, Seoul 137-701 (Korea, Republic of)

2011-12-15

Purpose: To develop a cylindrical phantom with rolled-up radiochromic films and dose analysis software in the rolled-out plane for quality assurance (QA) in volumetric modulated arc therapy (VMAT). Methods: The phantom consists of an acrylic cylindrical body wrapped with radiochromic film inserted into an outer cylindrical shell of 5 cm thickness. The rolled-up films with high spatial resolution enable detection of specific dose errors along the arc trajectory of continuously irradiated and modulated beams in VMAT. The developed dose analysis software facilitates dosimetric evaluation in the rolled-up and rolled-out planes of the film; the calculated doses on the corresponding points where the rolled-up film was placed were reconstructed into a rectangular dose matrix equivalent to that of the rolled-out plane of the film. The VMAT QA system was implemented in 3 clinical cases of prostate, nasopharynx, and pelvic metastasis. Each calculated dose on the rolled-out plane was compared with measurement values by modified gamma evaluation. Detected positions of dose disagreement on the rolled-out plane were also distinguished in cylindrical coordinates. The frequency of error occurrence and error distribution were summarized in a histogram and in an axial view of rolled-up plane to intuitively identify the corresponding positions of detected errors according to the gantry angle. Results: The dose matrix reconstructed from the developed VMAT QA system was used to verify the measured dose distribution along the arc trajectory. Dose discrepancies were detected on the rolled-out plane and visualized on the calculated dose matrix in cylindrical coordinates. The error histogram obtained by gamma evaluation enabled identification of the specific error frequency at each gantry angular position. The total dose error occurring on the cylindrical surface was in the range of 5%-8% for the 3 cases. Conclusions: The developed system provides a practical and reliable QA method to

Head and neck imaging with PET and PET/CT: artefacts from dental metallic implants

International Nuclear Information System (INIS)

Goerres, Gerhard W.; Hany, Thomas F.; Kamel, Ehab; Schulthess von, Gustav K.; Buck, Alfred

2002-01-01

Germanium-68 based attenuation correction (PET Ge68 ) is performed in positron emission tomography (PET) imaging for quantitative measurements. With the recent introduction of combined in-line PET/CT scanners, CT data can be used for attenuation correction. Since dental implants can cause artefacts in CT images, CT-based attenuation correction (PET CT ) may induce artefacts in PET images. The purpose of this study was to evaluate the influence of dental metallic artwork on the quality of PET images by comparing non-corrected images and images attenuation corrected by PET Ge68 and PET CT . Imaging was performed on a novel in-line PET/CT system using a 40-mAs scan for PET CT in 41 consecutive patients with high suspicion of malignant or inflammatory disease. In 17 patients, additional PET Ge68 images were acquired in the same imaging session. Visual analysis of fluorine-18 fluorodeoxyglucose (FDG) distribution in several regions of the head and neck was scored on a 4-point scale in comparison with normal grey matter of the brain in the corresponding PET images. In addition, artefacts adjacent to dental metallic artwork were evaluated. A significant difference in image quality scoring was found only for the lips and the tip of the nose, which appeared darker on non-corrected than on corrected PET images. In 33 patients, artefacts were seen on CT, and in 28 of these patients, artefacts were also seen on PET imaging. In eight patients without implants, artefacts were seen neither on CT nor on PET images. Direct comparison of PET Ge68 and PET CT images showed a different appearance of artefacts in 3 of 17 patients. Malignant lesions were equally well visible using both transmission correction methods. Dental implants, non-removable bridgework etc. can cause artefacts in attenuation-corrected images using either a conventional 68 Ge transmission source or the CT scan obtained with a combined PET/CT camera. We recommend that the non-attenuation-corrected PET images also be

Arbeitszeiten von Professorinnen und Professoren in Deutschland 2016

OpenAIRE

Weihs, Claus; Hernández Rodríguez, Tanja; Doeckel, Maximilian; Marty, Christoph; Wormer, Holger

2018-01-01

In dieser Studie werden belastbare Prognoseintervalle der wöchentlichen Gesamtarbeitszeit von Universitätsprofessorinnen und -professoren aus Daten einer Umfrage aus dem Jahre 2016 und a-priori Informationen aus früheren Studien bestimmt. Neben der Gesamtarbeitszeit werden auch Teilarbeitszeiten zum Beispiel für Lehre und Forschung ermittelt. Die Ergebnisse von frequentistischer und Bayesianischer Analyse werden verglichen. Aus den gültigen Fragebögen von aktiven Vollzeit arbeitenden Universi...

Analytical method for establishing indentation rolling resistance

Science.gov (United States)

Gładysiewicz, Lech; Konieczna, Martyna

2018-01-01

Belt conveyors are highly reliable machines able to work in special operating conditions. Harsh environment, long distance of transporting and great mass of transported martials are cause of high energy usage. That is why research in the field of belt conveyor transportation nowadays focuses on reducing the power consumption without lowering their efficiency. In this paper, previous methods for testing rolling resistance are described, and new method designed by authors was presented. New method of testing rolling resistance is quite simple and inexpensive. Moreover it allows to conduct the experimental tests of the impact of different parameters on the value of indentation rolling resistance such as core design, cover thickness, ambient temperature, idler travel frequency, or load value as well. Finally results of tests of relationship between rolling resistance and idler travel frequency and between rolling resistance and idler travel speed was presented.

IAS 25, Bilanzierung von Finanzinvestitionen (Accounting for Investments)

OpenAIRE

Steiner, Manfred

1997-01-01

IAS 25, Bilanzierung von Finanzinvestitionen (Accounting for Investments). - In: Rechnungslegung nach International Accounting Standards (IAS) / hrsg. von Jörg Baetge ... - Stuttgart : Schäffer-Poeschel, 1997. - S. 923-953

Politische Bildung im Kontext von Regierung, Unterricht und Zucht

Directory of Open Access Journals (Sweden)

Thomas Rucker

2014-02-01

Full Text Available Johann Friedrich Herbart (1776-1841 gilt als der Begründer der wissenschaftlichen Pädagogik. In diesem Beitrag wird zu zeigen versucht, dass Herbart die Unterstützung politischer Bildung als eine Aufgabe von Regierung, Unterricht und Zucht bestimmt und in seinem Werk wichtige „Bausteine“ für eine Theorie der politischen Bildung unter den Bedingungen von Erziehung vorlegt hat. Nach Herbart ist das politische Selbst- und Weltverhältnis auf Sachverhalte bezogen, die nicht nur die Lebensführung einzelner Menschen, sondern die Lebensführung einer Mehrzahl von Menschen betreffen. Nicht das Zusammenleben von Menschen generell ist jedoch Orientierungsgesichtspunkt des politischen Selbst- und Weltverhältnisses, sondern nur das problematisch gewordene Zusammenleben. Politik ergibt sich nach Herbart aus einem Konflikt hinsichtlich der Frage, wie das Zusammenleben von Menschen geregelt sein sollte. Während die Regierung lediglich mittelbar einen Beitrag zur politischen Bildung leistet, indem sie die Voraussetzungen für Unterricht und Zucht bereitstellt, fungieren die beiden zuletzt genannten Formen von Erziehung als die eigentlichen Medien, in denen die politische Bildung im Sinne Herbarts ihren Ort hat.

Phase transformation kinetics in rolled U-10 wt. % Mo foil: Effect of post-rolling heat treatment and prior γ-UMo grain size

Energy Technology Data Exchange (ETDEWEB)

Jana, Saumyadeep; Overman, Nicole; Varga, Tamas; Lavender, Curt; Joshi, Vineet V.

2017-12-01

The effect of sub-eutectoid heat treatment on the phase transformation behavior in rolled U-10 wt.percent Mo (U10Mo) foils was systematically investigated. The as-cast 5 mm thick foils were initially homogenized at 900 degrees C for 48 hours and were hot rolled to 2 mm and later cold rolled down to 0.2 mm. Three starting microstructures were evaluated: (i) hot- + cold-rolled to 0.2 mm (as-rolled condition), (ii) hot- + cold-rolled to 0.2 mm + annealed at 700 deg. C for 1 hour, and (iii) hot- + cold-rolled to 0.2 mm + annealed at 1000 deg. C for 60 hours. U10Mo rolled foils went through various degrees of decomposition when subjected to the sub-eutectoid heat-treatment step and formed a lamellar microstructure through a cellular reaction mostly along the previous γ-UMo grain boundaries.

{sup 18}F-FDG PET and PET/CT in Burkitt's lymphoma

Energy Technology Data Exchange (ETDEWEB)

Karantanis, Dimitrios, E-mail: dkarantanis@nuclmed.ne [Division of Nuclear Medicine, Department of Radiology, Mayo Clinic, Rochester, MN (United States); Durski, Jolanta M.; Lowe, Val J.; Nathan, Mark A.; Mullan, Brian P. [Division of Nuclear Medicine, Department of Radiology, Mayo Clinic, Rochester, MN (United States); Georgiou, Evangelos [Medical Physics Department, Medical School, University of Athens (Greece); Johnston, Patrick B. [Division of Hematology, Department of Medicine, Mayo Clinic, Rochester, MN (United States); Wiseman, Gregory A. [Division of Nuclear Medicine, Department of Radiology, Mayo Clinic, Rochester, MN (United States)

2010-07-15

Objective: To explore the value of {sup 18}F fluorodeoxy-glucose (FDG) positron emission tomography (PET) in Burkitt's lymphoma. Methods: All Burkitt's lymphoma patients referred for FDG PET or FDG PET/computed tomography (CT) exams at our institution from June 2003 to June 2006 were included. Selected patients were followed and clinical information was reviewed retrospectively. Results from FDG PET-PET/CT, as blindly reviewed by a consensus of two experienced readers, were compared with the status of the disease as determined by other laboratory, clinical and imaging exams and clinical follow-up. FDG PET-PET/CT results were classified as true positive or negative and false positive or negative. The degree of FDG uptake in the positive lesions was semiquantified as maximum standard uptake value (SUVmax). Results: Fifty-seven FDG PET-PET/CT exams were done in 15 patients. Seven exams were done for initial staging, 8 during and 14 after the completion of therapy, and 28 for disease surveillance. For nodal disease FDG PET-PET/CT was true positive in 8, true negative in 47 and false positive in 2 exams (sensitivity 100%, specificity 96%). For extranodal disease FDG PET-PET/CT was true positive in 6, true negative in 48 and false positive in 3 exams (sensitivity 100%, specificity 94%). The mean SUVmax for the positive nodal lesions was 15.7 (range 6.9-21.7, median 18.5) and for extranodal lesions was 14.2 (range 6.2-24.3, median 12.4). Conclusions: FDG PET-PET/CT is sensitive for the detection of viable disease in Burkitt's lymphoma. Affected areas demonstrated high degree of uptake that was reversible upon successful implementation of treatment.

Standardised uptake values from PET/CT images: comparison with conventional attenuation-corrected PET

International Nuclear Information System (INIS)

Souvatzoglou, M.; Ziegler, S.I.; Martinez, M.J.; Dzewas, G.; Schwaiger, M.; Bengel, F.; Busch, R.

2007-01-01

In PET/CT, CT-derived attenuation factors may influence standardised uptake values (SUVs) in tumour lesions and organs when compared with stand-alone PET. Therefore, we compared PET/CT-derived SUVs intra-individually in various organs and tumour lesions with stand-alone PET-derived SUVs. Thirty-five patients with known or suspected cancer were prospectively included. Sixteen patients underwent FDG PET using an ECAT HR+scanner, and subsequently a second scan using a Biograph Sensation 16PET/CT scanner. Nineteen patients were scanned in the reverse order. All images were reconstructed with an iterative algorithm (OSEM). Suspected lesions were grouped as paradiaphragmatic versus distant from the diaphragm. Mean and maximum SUVs were also calculated for brain, lung, liver, spleen and vertebral bone. The attenuation coefficients (μ values) used for correction of emission data (bone, soft tissue, lung) in the two data sets were determined. A body phantom containing six hot spheres and one cold cylinder was measured using the same protocol as in patients. Forty-six lesions were identified. There was a significant correlation of maximum and mean SUVs derived from PET and PET/CT for 14 paradiaphragmatic lesions (r=0.97 respectively; p<0.001 respectively) and for 32 lesions located distant from the diaphragm (r=0.87 and r=0.89 respectively; p<0.001 respectively). No significant differences were observed in the SUVs calculated with PET and PET/CT in the lesions or in the organs. In the phantom, radioactivity concentration in spheres calculated from PET and from PET/CT correlated significantly (r=0.99; p<0.001). SUVs of cancer lesions and normal organs were comparable between PET and PET/CT, supporting the usefulness of PET/CT-derived SUVs for quantification of tumour metabolism. (orig.)

Development of an aerostatic bearing system for roll-to-roll printed electronics

Science.gov (United States)

Chen, Shasha; Chen, Weihai; Liu, Jingmeng; Chen, Wenjie; Jin, Yan

2018-06-01

Roll-to-roll printed electronics is proved to be an effective way to fabricate electrical devices on various substrates. High precision overlay alignment plays a key role to create multi-layer electrical devices. Multiple rollers are adopted to support and transport the substrate web. In order to eliminate the negative effect of the machining error and assembling error of the roller, a whole roll-to-roll system including two aerostatic bearing devices with arrayed restrictors is proposed in this paper. Different to the conventional roller, the aerostatic bearing device can create a layer of air film between the web and the device to realize non-contact support and transport. Based on simplified Navier–Stokes equations, the theoretical model of the air film is established. Moreover, the pressure distribution of the whole flow field and single restrictor in different positions are modeled by conducting numerical simulation with computational fluid dynamics (CFD) software FLUENT. The load capacity curves and stiffness curves are generated to provide guidance for optimizing the structure of the device. A prototype of the aerostatic bearing system is set up and the experiment tests are carried out. For the proposed aerostatic bearing roller with a diameter of 100 mm and length of 200 mm, the experimental results show the aerostatic bearing method can achieve the position accuracy in a range of 1 μm in the vertical direction of the web, which is much better than that using existing methods.

Effects of hot rolled microstructure after twin-roll casting on microstructure, texture and magnetic properties of low silicon non-oriented electrical steel

International Nuclear Information System (INIS)

Liu, Hai-Tao; Wang, Yin-Ping; An, Ling-Zi; Wang, Zhao-Jie; Hou, Dao-Yuan; Chen, Jun-Mou; Wang, Guo-Dong

2016-01-01

In this work, a 0.71 wt%Si+0.44 wt%Al as-cast strip was produced by novel twin-roll casting. Some as-cast samples were respectively reheated and hot rolled at different temperatures in order to obtain different microstructure prior to cold rolling and annealing. The effects of the hot rolled microstructure on microstructure, texture evolution and magnetic properties were investigated in detail. A coarse deformed microstructure with λ-fiber texture was formed after hot rolling at 850–1050 °C, finally leading to an inhomogeneous recrystallization microstructure with strong λ-fiber, Goss and extremely weak γ-fiber texture. By contrast, a fine transformed microstructure was formed after hot rolling at 1150–1250 °C, finally leading to a fine and homogeneous recrystallization microstructure with stronger α-fiber, γ-fiber and much weaker λ-fiber texture. It should be noted that both the magnetic induction and core loss non-monotonically decreased or increased according to the hot rolling temperature. The unfavorable α-fiber and γ-fiber textures in the annealed sheets were much weaker than those of the conventional products regardless of the hot rolling temperature, thus contributing to a much higher magnetic induction. However, the average grain size in the annealed sheets was much lower than those of the conventional products regardless of the hot rolling temperature, thus leading to a higher core loss except the case of 1050 °C. Hence, it is underscored that better integrated magnetic properties than those of the conventional products can be obtained by optimizing the hot rolled microstructure to produce final desirable recrystallization microstructure and texture. - Highlights: • Non-oriented silicon steel was fabricated using twin-roll casting route. • Microstructure and texture evolution were clarified. • Effects of the hot rolled microstructure were investigated in detail. • Formation mechanism of the recrystallization texture was explored. �

Effects of hot rolled microstructure after twin-roll casting on microstructure, texture and magnetic properties of low silicon non-oriented electrical steel

Energy Technology Data Exchange (ETDEWEB)

Liu, Hai-Tao, E-mail: liuht@ral.neu.edu.cn; Wang, Yin-Ping; An, Ling-Zi; Wang, Zhao-Jie; Hou, Dao-Yuan; Chen, Jun-Mou; Wang, Guo-Dong

2016-12-15

In this work, a 0.71 wt%Si+0.44 wt%Al as-cast strip was produced by novel twin-roll casting. Some as-cast samples were respectively reheated and hot rolled at different temperatures in order to obtain different microstructure prior to cold rolling and annealing. The effects of the hot rolled microstructure on microstructure, texture evolution and magnetic properties were investigated in detail. A coarse deformed microstructure with λ-fiber texture was formed after hot rolling at 850–1050 °C, finally leading to an inhomogeneous recrystallization microstructure with strong λ-fiber, Goss and extremely weak γ-fiber texture. By contrast, a fine transformed microstructure was formed after hot rolling at 1150–1250 °C, finally leading to a fine and homogeneous recrystallization microstructure with stronger α-fiber, γ-fiber and much weaker λ-fiber texture. It should be noted that both the magnetic induction and core loss non-monotonically decreased or increased according to the hot rolling temperature. The unfavorable α-fiber and γ-fiber textures in the annealed sheets were much weaker than those of the conventional products regardless of the hot rolling temperature, thus contributing to a much higher magnetic induction. However, the average grain size in the annealed sheets was much lower than those of the conventional products regardless of the hot rolling temperature, thus leading to a higher core loss except the case of 1050 °C. Hence, it is underscored that better integrated magnetic properties than those of the conventional products can be obtained by optimizing the hot rolled microstructure to produce final desirable recrystallization microstructure and texture. - Highlights: • Non-oriented silicon steel was fabricated using twin-roll casting route. • Microstructure and texture evolution were clarified. • Effects of the hot rolled microstructure were investigated in detail. • Formation mechanism of the recrystallization texture was explored. �

Present and future of PET and PET/CT in gynaecologic malignancies

Energy Technology Data Exchange (ETDEWEB)

Musto, Alessandra [Department of Nuclear Medicine, PET Center, Policlinico Sant' Orsola Malpighi, Bologna University, Bologna (Italy); Rampin, Lucia [Department of Nuclear Medicine, PET Center, Radiology, Medical Physics, Santa Maria della Misericordia Hospital, viale tre martiri 140, 45100 Rovigo (Italy); Nanni, Cristina [Department of Nuclear Medicine, PET Center, Policlinico Sant' Orsola Malpighi, Bologna University, Bologna (Italy); Marzola, Maria Cristina [Department of Nuclear Medicine, PET Center, Radiology, Medical Physics, Santa Maria della Misericordia Hospital, viale tre martiri 140, 45100 Rovigo (Italy); Fanti, Stefano [Department of Nuclear Medicine, PET Center, Policlinico Sant' Orsola Malpighi, Bologna University, Bologna (Italy); Rubello, Domenico, E-mail: domenico.rubello@libero.it [Department of Nuclear Medicine, PET Center, Radiology, Medical Physics, Santa Maria della Misericordia Hospital, viale tre martiri 140, 45100 Rovigo (Italy)

2011-04-15

Objectives: To review the published data in literature on patients affected by gynaecological malignancies to establish the role of {sup 18}F-FDG positron emission tomography (PET) and PET/CT in comparison to conventional imaging (CI). Materials and methods: All papers specifically addressed to the role of {sup 18}F-FDG PET and PET/CT in gynaecological malignancies published on PubMed/Medline, in abstracts from the principal international congresses, in the guidelines from national Societies that had appeared in literature until November 2009 were considered for the purpose of the present study. Results and conclusions: The use of {sup 18}F-FDG PET, and even more of {sup 18}F-FDG PET/CT, is increasing in the follow up of patients with gynaecologic malignancies and suspected recurrent disease: there is evidence in the literature that {sup 18}F-FDG PET/CT has a higher sensitivity than CI in depicting occult metastatic spread. An interesting issue is represented by patients with ovarian cancer with an increase of the specific biomarker, CA-125, and negative/inconclusive findings at CI. The use of {sup 18}F-FDG PET in differential diagnosis and staging is more controversial, but there is some evidence that a baseline PET examination performed before commencing therapy, for staging purpose, is also useful to evaluate the response to chemoradiation treatment. In several papers it has been suggested a relevant role of {sup 18}F-FDG PET/CT in evaluating the entity of response to treatment and therefore to plan the subsequent therapeutic strategy.

Quantitative and Visual Assessments toward Potential Sub-mSv or Ultrafast FDG PET Using High-Sensitivity TOF PET in PET/MRI.

Science.gov (United States)

Behr, Spencer C; Bahroos, Emma; Hawkins, Randall A; Nardo, Lorenzo; Ravanfar, Vahid; Capbarat, Emily V; Seo, Youngho

2018-06-01

Newer high-performance time-of-flight (TOF) positron emission tomography (PET) systems have the capability to preserve diagnostic image quality with low count density, while maintaining a high raw photon detection sensitivity that would allow for a reduction in injected dose or rapid data acquisition. To assess this, we performed quantitative and visual assessments of the PET images acquired using a highly sensitive (23.3 cps/kBq) large field of view (25-cm axial) silicon photomultiplier (SiPM)-based TOF PET (400-ps timing resolution) integrated with 3 T-MRI in comparison to PET images acquired on non-TOF PET/x-ray computed tomography (CT) systems. Whole-body 2-deoxy-2-[ 18 F]fluoro-D-glucose ([ 18 F]FDG) PET/CT was acquired for 15 patients followed by whole body PET/magnetic resonance imaging (MRI) with an average injected dose of 325 ± 84 MBq. The PET list mode data from PET/MRI were reconstructed using full datasets (4 min/bed) and reduced datasets (2, 1, 0.5, and 0.25 min/bed). Qualitative assessment between PET/CT and PET/MR images were made. A Likert-type scale between 1 and 5, 1 for non-diagnostic, 3 equivalent to PET/CT, and 5 superior quality, was used. Maximum and mean standardized uptake values (SUV max and SUV mean ) of normal tissues and lesions detected were measured and compared. Mean visual assessment scores were 3.54 ± 0.32, 3.62 ± 0.38, and 3.69 ± 0.35 for the brain and 3.05 ± 0.49, 3.71 ± 0.45, and 4.14 ± 0.44 for the whole-body maximum intensity projections (MIPs) for 1, 2, and 4 min/bed PET/MR images, respectively. The SUV mean values for normal tissues were lower and statistically significant for images acquired at 4, 2, 1, 0.5, and 0.25 min/bed on the PET/MR, with values of - 18 ± 28 % (p PET/MR datasets. High-sensitivity TOF PET showed comparable but still better visual image quality even at a much reduced activity in comparison to lower-sensitivity non-TOF PET. Our data translates to a seven times

Imaging with 124I in differentiated thyroid carcinoma: is PET/MRI superior to PET/CT?

International Nuclear Information System (INIS)

Binse, I.; Poeppel, T.D.; Ruhlmann, M.; Gomez, B.; Bockisch, A.; Rosenbaum-Krumme, S.J.; Umutlu, L.

2016-01-01

The aim of this study was to compare integrated PET/CT and PET/MRI for their usefulness in detecting and categorizing cervical iodine-positive lesions in patients with differentiated thyroid cancer using 124 I as tracer. The study group comprised 65 patients at high risk of iodine-positive metastasis who underwent PET/CT (low-dose CT scan, PET acquisition time 2 min; PET/CT 2 ) followed by PET/MRI of the neck 24 h after 124 I administration. PET images from both modalities were analysed for the numbers of tracer-positive lesions. Two different acquisition times were used for the comparisons, one matching the PET/CT 2 acquisition time (2 min, PET/MRI 2 ) and the other covering the whole MRI scan time (30 min, PET/MRI 30 ). Iodine-positive lesions were categorized as metastasis, thyroid remnant or inconclusive according to their location on the PET/CT images. Morphological information provided by MRI was considered for evaluation of lesions on PET/MRI and for volume information. PET/MRI 2 detected significantly more iodine-positive metastases and thyroid remnants than PET/CT 2 (72 vs. 60, p = 0.002, and 100 vs. 80, p = 0.001, respectively), but the numbers of patients with at least one tumour lesion identified were not significantly different (21/65 vs. 17/65 patients). PET/MRI 30 tended to detect more PET-positive metastases than PET/MRI 2 (88 vs. 72), but the difference was not significant (p = 0.07). Of 21 lesions classified as inconclusive on PET/CT, 5 were assigned to metastasis or thyroid remnant when evaluated by PET/MRI. Volume information was available in 34 % of iodine-positive metastases and 2 % of thyroid remnants on PET/MRI. PET/MRI of the neck was found to be superior to PET/CT in detecting iodine-positive lesions. This was attributed to the higher sensitivity of the PET component, Although helpful in some cases, we found no substantial advantage of PET/MRI over PET/CT in categorizing iodine-positive lesions as either metastasis or thyroid remnant

Saage tuttavaks : Elisabeth ja Karl von Hoerschelmann / Mai Levin

Index Scriptorium Estoniae

Levin, Mai, 1942-

2004-01-01

Kuraator M. Levin kuni 10. X 2004 Adamson-Ericu muuseumis avatud näitusest "Tuntud ja tundmatud Elisabeth von Rosendorff-Hoerschelmann ja Karl von Hoerschelmann". Enamik töid on kunstnike laste Konstantin Hoerschelmanni ja Anna Röder-Hoerschelmanni omand. Elisabeth Rosendorff (1898-1984) sündis Virumaal Maidlas eesti perekonnas, Karl von Hoerschelmann (1899-1951) Sevastoopolis saksa perekonnas

Von Willebrand protein binds to extracellular matrices independently of collagen.

OpenAIRE

Wagner, D D; Urban-Pickering, M; Marder, V J

1984-01-01

Von Willebrand protein is present in the extracellular matrix of endothelial cells where it codistributes with fibronectin and types IV and V collagen. Bacterial collagenase digestion of endothelial cells removed fibrillar collagen, but the pattern of fibronectin and of von Willebrand protein remained undisturbed. Exogenous von Willebrand protein bound to matrices of different cells, whether rich or poor in collagen. von Willebrand protein also decorated the matrix of cells grown in the prese...

Bewertung von Fahrzeuggeräuschen

Science.gov (United States)

Genuit, Klaus; Schulte-Fortkamp, Brigitte; Fiebig, André; Haverkamp, Michael

Bei der Wahrnehmung und Beurteilung eines Automobils sind unzählige Merkmale und Eigenschaften von Bedeutung. Dabei können Merkmale objektiv-technisch beschrieben werden, wie Angaben zur Motorisierung, Höchstgeschwindigkeit, Drehmoment, zulässige Zuladung, Verbrauch usw. Daneben sind weitere Eigenschaften von Bedeutung, die sich einer einfachen objektiv-technischen Beschreibung entziehen. Hier sind Begriffe zu nennen, wie Sicherheit, allgemeine Qualitätsanmutung, Design, Ergonomie, Komfort, Haptik, Fahrdynamik, Zuverlässigkeit, die deutlich schwieriger objektiv erfassbar und beschreibbar sind (Abb. 4.1).

Low Band Gap Polymers for Roll-to-Roll Coated Organic Photovoltaics – Design, Synthesis and Characterization

DEFF Research Database (Denmark)

Bundgaard, Eva; Hagemann, Ole; Jørgensen, Mikkel

2011-01-01

In this paper we present the design and synthesis of 25 new low band gap polymers. The polymers were characterized by UV-vis spectroscopy which showed optical band gaps of 2.0–0.9 eV. The polymers which were soluble enough were applied in organic photovoltaics, both small area devices with a spin...... coated active layer and in large area modules where all layers including the active layer were either roll-to-roll coated or printed. These experiments showed that the design of polymers compatible with roll-toroll coating is not straightforward and that there are various issues such as donor...

Magnetic Resonance-based Motion Correction for Quantitative PET in Simultaneous PET-MR Imaging.

Science.gov (United States)

Rakvongthai, Yothin; El Fakhri, Georges

2017-07-01

Motion degrades image quality and quantitation of PET images, and is an obstacle to quantitative PET imaging. Simultaneous PET-MR offers a tool that can be used for correcting the motion in PET images by using anatomic information from MR imaging acquired concurrently. Motion correction can be performed by transforming a set of reconstructed PET images into the same frame or by incorporating the transformation into the system model and reconstructing the motion-corrected image. Several phantom and patient studies have validated that MR-based motion correction strategies have great promise for quantitative PET imaging in simultaneous PET-MR. Copyright © 2017 Elsevier Inc. All rights reserved.

Baron von Zach's business relations with the Munich entrepreneur Joseph von Utzschneider (German Title: Geschäftsbeziehungen des Barons von Zach zu dem Münchner Unternehmer Joseph von Utzschneider)

Science.gov (United States)

Schneider, Ivo

The relationship between the astronomer von Zach on the one side and the entrepreneur Joseph von Utzschneider and his partner Georg von Reichenbach on the other dates presumably from the year 1807 when Zach spent two months in Munich. Already in the same year Zach had ordered an instrument for himself and began to solicit business for the institute of Reichenbach, Utzschneider, and Liebherr, which was founded in 1804. One of the clients canvassed by Zach was the director of the observatory in Naples Zuccari. Zuccari had ordered the whole equipment for the new observatory from this institute in 1813. The instruments for Naples, which were completed in 1814, were sent accompanied by Reichenbach by land and sea to their destination where Reichenbach supervised their setup. At that time Reichenbach had separated from Utzschneider who kept the optical institute in Benediktbeuern with his new partner Joseph von Fraunhofer whereas Reichenbach became owner of the mathematical-mechanical institute in Munich. For personal and economical reasons Utzschneider began soon after to produce not only optical glass but also optical devices similar to those offered by Reichenbach. As soon as two institutes in Munich competed against each other on the market for sophisticated geodetical and astronomical instruments Zach sided with Utzschneider. Zach's main professional argument for this decision was that both competitors got the optical glass for their instruments from Utzschneider's optical institute in Benediktbeuern. This meant that Utzschneider had first choice and so the optical part of his instruments could be considered as better than that of Reichenbach`s instruments. Zach's role as an agent in Italy and France for the sale of products coming from Utzschneider's manufactories is highlighted by three of Zach's letters to Utzschneider from 1817 and 1818, two of which are reproduced here for the first time.

Analytical method for establishing indentation rolling resistance

Directory of Open Access Journals (Sweden)

Gładysiewicz Lech

2018-01-01

Full Text Available Belt conveyors are highly reliable machines able to work in special operating conditions. Harsh environment, long distance of transporting and great mass of transported martials are cause of high energy usage. That is why research in the field of belt conveyor transportation nowadays focuses on reducing the power consumption without lowering their efficiency. In this paper, previous methods for testing rolling resistance are described, and new method designed by authors was presented. New method of testing rolling resistance is quite simple and inexpensive. Moreover it allows to conduct the experimental tests of the impact of different parameters on the value of indentation rolling resistance such as core design, cover thickness, ambient temperature, idler travel frequency, or load value as well. Finally results of tests of relationship between rolling resistance and idler travel frequency and between rolling resistance and idler travel speed was presented.

Research, design and education, Von Humboldt revisited

NARCIS (Netherlands)

Bax, M.F.T.; Doevendans, C.H.; Trum, H.M.G.J.; Langenhuizen, Anja; Ouwerkerk, Marieke van; Rosemann, Jurgen

2001-01-01

This paper is a result of reflection on the interrelation design-research-cultivation, and on the interpretation of Von Humboldt's maxim: 'Einheit von Forschung und Lehre', which governed the academic world in the past two centuries. It is argued that 'Forschung' should be interpreted as 'Research

Sensory analysis of pet foods.

Science.gov (United States)

Koppel, Kadri

2014-08-01

Pet food palatability depends first and foremost on the pet and is related to the pet food sensory properties such as aroma, texture and flavor. Sensory analysis of pet foods may be conducted by humans via descriptive or hedonic analysis, pets via acceptance or preference tests, and through a number of instrumental analysis methods. Sensory analysis of pet foods provides additional information on reasons behind palatable and unpalatable foods as pets lack linguistic capabilities. Furthermore, sensory analysis may be combined with other types of information such as personality and environment factors to increase understanding of acceptable pet foods. Most pet food flavor research is proprietary and, thus, there are a limited number of publications available. Funding opportunities for pet food studies would increase research and publications and this would help raise public awareness of pet food related issues. This mini-review addresses current pet food sensory analysis literature and discusses future challenges and possibilities. © 2014 Society of Chemical Industry.

Radiometric study of creep in ingot rolling

International Nuclear Information System (INIS)

Kubicek, P.; Zamyslovsky, Z.; Uherek, J.

The radiometric study of creep during ingot rolling performed in the rolling mill of the Vitkovice Iron and Steel Works and the first results are described. Selected sites in 3 to 8 ton ingots were labelled with 2 to 3.7x10 5 Bq of 60 Co and after rolling into blocks, the transposition of the labelled sites of the ingots was investigated. The results indicate creep during rolling, local extension in certain sites under study and help to determine the inevitable bottom crop incurred in the forming. Finally, the requirements put on the radiometric apparatus for the next stages of technological research are presented. (author)

John von Neumann selected letters

CERN Document Server

2005-01-01

John von Neuman was perhaps the most influential mathematician of the twentieth century, especially if his broad influence outside mathematics is included. Not only did he contribute to almost all branches of mathematics and created new fields, but he also changed post-World War II history with his work on the design of computers and with being a sought-after technical advisor to many figures in the U.S. military-political establishment in the 1940s and 1950s. The present volume is the first substantial collection of (previously mainly unpublished) letters written by von Neumann to colleagues, friends, government officials, and others. The letters give us a glimpse of the thinking of John von Neumann about mathematics, physics, computer science, science management, education, consulting, politics, and war. Readers of quite diverse backgrounds will find much of interest in this fascinating first-hand look at one of the towering figures of twentieth century science.

The application of PET and PET-CT in cervical cancer

International Nuclear Information System (INIS)

Huang Jianmin; Pan Liping; Li Dongxue

2007-01-01

Cervical cancer is the common malignancies in woman, 18 F-fluorodeoxyglucose ( 18 F-FDG) PET is a well-established method for detecting, staging, cancer recurrence, therapeutic response and prognosis of cervical cancer. PET-CT can accurately locate the anatomical sites of tracer uptake and improve the diagnostic accuraccy of PET. (authors)

76 FR 34101 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

Science.gov (United States)

2011-06-10

...] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia Determinations On...-quality steel products from Russia would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. The Commission further...

Muuga / Mary von Grünewaldt ; tõlk. Mati Sirkel

Index Scriptorium Estoniae

Grünewaldt, Mary von

2004-01-01

Leo Zoegelt ostetud Muuga mõisahoone korrastamisest ja uue hoone ehitamisest C. T. von Neffi kunstikogu paigutamise tarbeks. Tütre mälestused. Tõlgitud raamatust: Skizzen und Bilder aus dem Leben Carl Timoleon von Neff / Mary von Grünewaldt. Darmstadt, 1887

The petit rat (pet/pet), a new semilethal mutant dwarf rat with thymic and testicular anomalies.

Science.gov (United States)

Chiba, Junko; Suzuki, Katsushi; Suzuki, Hiroetsu

2008-12-01

The petit rat (pet/pet) is a recently discovered semilethal mutant dwarf. The neonatal pet/pet rats had a low body weight and small thymus and testis. During the first 3 d after birth, 50% of the male and 80% of the female pet/pet pups were lost or found dead. Surviving pet/pet rats showed marked retardation of postnatal growth, and their body weights were 41% (female rats) and 32% (male rats) of those of normal rats at the adult stage. The pet/pet rats exhibited proportional dwarfism, and their longitudinal bones were shorter than those of controls without skeletal malformations. Most organs of male pet/pet rats, especially the thymus, testis, adipose tissue surrounding the kidney, and accessory sex organs, weighed markedly less at 140 d of age than did those of their normal counterparts. The thymus of pet/pet rats was small with abnormal thymic follicles. Testes from pet/pet rats exhibited 2 patterns of abnormal histology. Spermatogenesis was present in testes that were only slightly anomalous, but the seminiferous tubules were reduced in diameter. In severely affected testes, most of the seminiferous tubules showed degeneration, and interstitial tissue was increased. Plasma growth hormone concentrations did not differ between pet/pet and normal male rats. The dwarf phenotype of pet/pet rats was inherited as an autosomal recessive trait. These results indicate that the pet/pet rat has a semilethal growth-hormone-independent dwarf phenotype that is accompanied by thymic and testicular anomalies and low birth weight.

Untersuchungen zur Farbreaktion von Amilorid, Chlorhexidin und Proguanil mit Hypobromit

OpenAIRE

Huth, Silke

2004-01-01

Bei der Reaktion von Amiloridhydrochlorid (1· HCl) mit Brom in alkalischer Lösung wird ein gelbbraunes Dehydrierungsprodukt erhalten, daß als 3-(3-Amino-1,2,4-oxadiazol-5-yl)-5-chlor-2,6-pyrazindiamin (6) identifiziert werden konnte. Durch Vergleich von Massen- und NMR-Spektren der Verbindung 6 mit Spektren von 1· HCl und Referenzsubstanzen I-III konnte auf die verbindung 6 geschlossen werden. Die Struktur wurde durch eine Röntgenstrukturanalyse abgesichert. Erhitzen von Amiloridhydrochlorid ...

Pipe Rolling from Continuous Cast Metal

International Nuclear Information System (INIS)

Zhordania, I.; Chkhartishvili, I.; Lordkipanidze, J.; Melashvili, Z.; Papava, K.; Khundadze, K.

2007-01-01

The approach to manufacturing of high quality pipes as a result of solid and hollow billet rolling from continuous cast metal is shown. Optimal parameters of piercing, temperature of piercing and piercing rolling mill rollers speed have been experimentally established. (author)

Efficient Circulation of Railway Rolling Stock

NARCIS (Netherlands)

A. Alfieri (Arianna); R. Groot (Rutger); L.G. Kroon (Leo); A. Schrijver (Lex)

2002-01-01

textabstractRailway rolling stock (locomotives, carriages, and train units) is one of the most significant cost sources for operatorsof passenger trains, both public and private. Rolling stock costsare due to material acquisition, power supply, and material maintenance. The efficient circulation of

Value of PET and PET-CT for monitoring tumor therapy

International Nuclear Information System (INIS)

Chen Xiang; Zhao Jinhua

2007-01-01

18 F-fluorodeoxyglucose ( 18 F-FDG) PET or PET-CT is an accurate test for differentiating residual viable tumor tissue from therapy-induced changes in tumor. Furthermore, quantitative assessment of therapy-induced changes in tumor 18 F-FDG uptake may allow the prediction of tumor response. Treatment may be adjusted according to tumor response. So it is increasingly used to monitor tumor response in patients undergoing chemotherapy and chemoradiotherapy. Here we focused on practical aspects of 18 F-FDG PET or PET-CT for treatment monitoring and on the existing advantages and challenges. (authors)

Hullud päevad von Krahlis

Index Scriptorium Estoniae

2006-01-01

Von Krahli Teatris mängitakse neil päevi neli korda Peeter Jalaka lavastuses Tõnu Kõrvitsa kammeroopereid "Tuliaed" ja "Mu luiged, mu mõtted", mille aluseks on luuletaja Marie Heibergi saatus. Libreto autor on Maarja Kangro. Kammerooperid tulevad lavale Von Krahli Teatri ja Nargen Opera koostöös. Esitavad Kädy Plaas, Helen Lokuta, Nargen Opera koor ja Tallinna Kammerorkester, dirigent Tõnu Kaljuste

Diagnosis and management of von Willebrand disease: guidelines for primary care.

Science.gov (United States)

Yawn, Barbara; Nichols, William L; Rick, Margaret E

2009-12-01

Von Willebrand disease is an inherited condition characterized by deficiency of von Willebrand factor, which is essential in hemostasis. The National Heart, Lung, and Blood Institute has released new evidence-based guidelines for the diagnosis and management of the disease. There are three major subtypes of von Willebrand disease, classified as partial quantitative deficiency (low levels) of von Willebrand factor (type 1), qualitative deficiency (type 2), or virtually complete deficiency (type 3). Diagnosis is usually made by reviewing the patient's personal and family history of bleeding and by clinical evaluation for more common reasons for bleeding, supplemented with laboratory tests. Assessment may be used to determine bleeding risk before surgery and other invasive procedures, and to diagnose reasons for unexplained hemorrhaging. Von Willebrand factor levels of 30 IU per dL or lower are required for the definite diagnosis of inherited von Willebrand disease. Persons with levels of 30 to 50 IU per dL may not have the disease, but may need agents to increase von Willebrand factor levels during invasive procedures or childbirth. Treatment is tailored to the subtype of the disease: increasing plasma concentration of von Willebrand factor by releasing endogenous stores with desmopressin or replacing nonexistent or ineffective von Willebrand factor by using human plasma-derived, viral-inactivated concentrates; treatment is often combined with hemostatic agents that have mechanisms other than increasing von Willebrand factor. Regular prophylaxis is seldom required, and treatment is initiated before planned invasive procedures or in response to bleeding.

Connecting the New World. Nets, mobility and progress in the Age of Alexander von Humboldt

Directory of Open Access Journals (Sweden)

Moritz von Brescius

2012-12-01

Full Text Available Zusammenfassung Dieser Artikel untersucht das Verhältnis zwischen den revolutionären technologischen Neuerungen des 19. Jahrhunderts und dem Leben und Wirken Alexander von Humboldts (1769-1859. Dabei wird gefragt, wie Humboldt versuchte, die neuen und sprichwörtlich bahnbrechenden Kommunikations- und Transporttechnologien seiner Zeit zu nutzen, um den amerikanischen Kontinent in globale kommerzielle und kulturelle Austauschprozesse zu integrieren. Jüngere Forschungen zu Humboldts amerikanischer Expedition (1799-1804 haben behauptet, dass seine Beschreibungen Südamerikas den Kontinent für zahlreiche „transformative interventions“ (Pratt von Seiten europäischer Kapitalisten und Investoren zugänglich gemacht hätten. Diese Studien haben jedoch nicht analysiert, aus welchen Motiven heraus Humboldt diese Eingriffe in die Natur unterstützte. Darüber hinaus wurde nicht der zentralen Frage nachgegangen, welche Rolle diese Projekte in Humboldts eigener Auffassung über die Kräfte des gesellschaftlichen Fortschritts gespielt haben. Um Humboldts Unterstützung für tiefgreifende Eingriffe in die Natur Amerikas nachvollziehen zu können, analysiert dieser Artikel zunächst, welche Rolle der „Geodeterminismus“ und die Fortschrittstheorien der Aufklärung in seinem Verständnis von zivilisatorischer Entwicklung spielten. Dabei sollen solche Beispiele menschlicher Interventionen in die Natur Amerikas untersucht werden, die Humboldt selbst aktiv förderte – nicht zuletzt, da sie geeignet schienen, „natürliche“ Barrieren für gesellschaftliche Austauschprozesse zu beseitigen. Dies waren vor allem die Nutzung von Dampfschiffen, elektrischer Telegrafie, Eisenbahnen und großangelegten Kanalprojekten, deren gebündelte Effekte zu einer signifikanten Beschleunigung von Welthandel und Kommunikationsprozessen führten. Diese zeitgenössischen Innovationen sollen mit den vier Motiven „Netz“, „Mobilität“, „Fortschritt“ und �

Von Willebrand disease protects against arterial thrombosis

NARCIS (Netherlands)

Sanders, Y.V.; Eikenboom, J.C.; De Wee, E.M.; Van Der Bom, J.G.; Cnossen, M.H.; Degenaar-Dujardin, M.E.; Fijnvandraat, K.; Kamphuisen, P.W.; Laros-Van Gorkum, B.A.; Meijer, K.; Mauser -Bunschoten, E.P.; Leebee k, F.W.

Background and Aims: Von Willebrand disease (VWD) is caused by reduced levels of or dysfunctional von Willebrand factor (VWF) and is characterized by a bleeding tendency. It is well known that individuals with high VWF levels have a higher risk for arterial thrombosis. Although it has never been

The role of computed tomography in evaluation of a white matter edema during postoperative brain radiation therapy; Beobachtung von Oedemen in der weissen Substanz waehrend postoperativer Hirnbestrahlung. Die Rolle computertomographischer Untersuchungen

Energy Technology Data Exchange (ETDEWEB)

Thalacker, U.; Somogyi, A.; Nemeth, G. [Imre-Haynal-Univ. fuer Gesundheitswissenschaften, Strahlentherapeutischer Lehrstuhl, Budapest (Hungary); Liszka, G. [Staatliches Onkologisches Inst., Roentgendiagnostische Abt., Budapest (Hungary)

1998-01-01

./MG) [Deutsch] Ziel unserer Untersuchungen war es festzustellen, inwieweit man ein waehrend einer postoperativen Hirnbestrahlung aufgetretenes Oedem und dessen Verlauf nach Diuretikagabe mit Hilfe von computertomographisch ermittelten HE-Werten (Houndsfield-Einheiten) verfolgen kann. In der ersten Untersuchungsserie wurden bei 75 Patienten (Alter 20 bis 65 Jahren; Patientegruppe 1) mit Zephalalgie die HE-Werte der nativen unveraenderten weissen Substanz bestimmt. In der zweiten Patientengruppe befanden sich 20 Patienten mit operierten Gehirntumoren bei denen von Strahlentherapie und nach 10, 20, 30, 40 und 50 Gy die HE-Werte bestimmt wurden. In der dritten Patientengruppe befanden sich 64 Patienten, die wegen eines Gehirntumors bereits operiert worden waren und nun einer postoperativen Radiatio unterzogen wurden. In der zweiten und dritten Patientengruppe wurden die Bestrahlungen teils mit Telekobalt, teils mit Photonen eines Linearbeschleunigers (6 und 9 MeV) durchgefuehrt. Bei der CT-Untersuchungen kam ein Siemens Somatom CR (125 kV, 450 mAs) mit einer Scan-Zeit von 5 s zur Anwendung. In der ersten Patientengruppe stellten wir keine Werte unter 30 HE in der weissen Substanz fest. Die Werte der zweiten Patientengruppe bewegten sich ohne Diuretikagabe zu Beginn der Bestrahlung zwischen 25 und 29 HE. Bei einem Abfall unter 25 HE traten Dauerkopfschmerz, Schwindel und Querulanz auf. In diesen Faellen wurde die diuretische Behandlung so lange gesteigert, bis wieder Werte von 25 bis 29 HE vorlagen. In derm18itten Patientengruppe stellten wir zu Beginn der Radiatio bei 47 von 64 Patienten Werte von 25 bis 29 HE fest. Obwohl jedem Patienten von Anfang an Furosemid verabreicht wurde, verringerten sich bei 28 Patienten die Werte auf 20 bis 24 HE. Eine Verbesserung konnte mit zusaetzlicher Gabe von Glyzerin per os erreicht werden. Daraufhin pendelten sich die Werte auf 25 bis 29 HE ein. Lediglich in einem Fall fielen die Werte unter 20 HE. Hier war eine zusaetzliche Gabe Mannit

Processing and characterization of extruded PET and its r-PET and ...

Indian Academy of Sciences (India)

of r-PET and r-PET+ MWCNT fillers was obtained by the precipitation method using TFA as a solvent and acetone ... crystallinity in r-PET and decrease in chain entanglements. ..... insufficient to supply the complete information of the surface.

A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules

DEFF Research Database (Denmark)

Krebs, Frederik C; Gevorgyan, Suren; Gholamkhass, Bobak

2009-01-01

A round robin for the performance of roll-to-roll coated flexible large-area polymer solar-cell modules involving 18 different laboratories in Northern America, Europe and Middle East is presented. The study involved the performance measurement of the devices at one location (Risø DTU) followed b...

Large-scale roll-to-roll photonic sintering of flexo printed silver nanoparticle electrodes

DEFF Research Database (Denmark)

Hösel, Markus; Krebs, Frederik C

2012-01-01

In this report we employ static and roll-to-roll (R2R) photonic sintering processes on flexo printed silver nanoparticle-based electrode structures with a heat-sensitive 60 mm thin barrier foil as a substrate. We use large area electrode structures to visualize the increased optical footprint...... as the nanoparticles are already sintered. The advantage of single exposure is the ability to produce higher R2R processing speeds without overlapping, which is shown in the form of theoretical calculations....

Entwicklung von Antikörper-Mikroarray : von Biophysik der Mikrospot-Reaktion bis zur Hochdurchsatzanalyse der Proteine

OpenAIRE

Kusnezow, Wlad

2007-01-01

Obwohl Protein-Mikroarrays ursprünglich aus dem gut entwickelten und fest etablierten DNA-Pendant entstanden sind, repräsentierte jedoch die Umstellung der Mikroarray-Technik von der DNA- auf die Proteinanalyse aufgrund der enormen physikalisch-chemischen Variabilität der Proteine, deren relativ niedrigen Stabilität und der komplexen Mikrospot-Kinetik eine große technologische Herausforderung. Deshalb setzt das Vorhaben, die Technik der Antikörper–Mikroarrays von ihrem konzeptuellen Zustand a...

PET and SPECT investigations in Alzheimer's disease; Nuklearmedizin und Demenz - Anwendung bei Morbus Alzheimer

Energy Technology Data Exchange (ETDEWEB)

Asenbaum, S. [Universitaetsklinik fuer Nuklearmedizin, Universitaetsklinik fuer Neurologie, Wien (Austria); Abteilung fuer klinische Neurologie, Universitaetsklinik fuer Neurologie, Waehringer Guertel 18-20, 1090, Wien (Austria)

2003-07-01

Nuclear medicine offers a wide range of possibilities to investigate dementia. Various SPECT and PET tracers will be introduced in this article first. Different questions concerning evaluation of dementia are discussed taking Alzheimer's disease (AD) as an example. It is important to perform nuclear medicine investigations on high technical level, using standardized methods as statistical parametric mapping (SPM) for evaluation. If neuroprotective therapies are available, an early diagnosis, the determination of risk factors and longitudinal investigations will be the focus of interest and the main goal of nuclear medicine. Apart from measuring cerebral perfusion and glucose metabolism the development of new ligands, concerning the cholinergic system and the visualization of amyloid plaques, is of great importance. (orig.) [German] Nuklearmedizin bietet bei der Erfassung und Beurteilung eines dementiellen Prozesses eine Vielzahl von Untersuchungsmoeglichkeiten. Anhand des Morbus Alzheimer (DAT) werden in dem vorliegenden Artikel neben einer kurzen Schilderung der zur Verfuegung stehenden Methoden die verschiedenen nuklearmedizinisch relevante Fragestellungen angefuehrt, zu deren Beantwortung die funktionelle Bildgebung Informationen liefern kann. Durch den Einsatz bestimmter, standardisierter Auswerteverfahren wie statistical parametric mapping (SPM) ist es moeglich, entscheidende Hinweise zur Diagnose und Differenzialdiagnose der DAT zu erlangen. In Zukunft werden, insbesondere bei einer Verfuegbarkeit neuroprotektiver Therapien, eine moeglichst fruehe Diagnosestellung und die Erfassung von Risikofaktoren sowie die Moeglichkeit einer Verlaufsbeobachtung in den Mittelpunkt des Interesses und in das Zentrum nuklearmedizinischer Untersuchungen ruecken. Vor allem fuer diese Anforderungen ist neben der qualitaetsvollen Untersuchung von zerebraler Perfusion und Glukosestoffwechsel eine Weiterentwicklung spezieller Liganden v. a. das cholinerge System betreffend und

Magnon Inflation: Slow Roll with Steep Potentials

CERN Document Server

Adshead, Peter; Burgess, C P; Hayman, Peter; Patil, Subodh P

2016-01-01

We find multi-scalar effective field theories (EFTs) that can achieve a slow inflationary roll despite having a scalar potential that does not satisfy the usual slow-roll condition (d V)^2 << V^2/Mp^2. They evade the usual slow-roll conditions on $V$ because their kinetic energies are dominated by single-derivative terms rather than the usual two-derivative terms. Single derivatives dominate during slow roll and so do not require a breakdown of the usual derivative expansion that underpins calculational control in much of cosmology. The presence of such terms requires some sort of UV Lorentz-symmetry breaking during inflation (besides the usual cosmological breaking). Chromo-natural inflation provides an example of a UV theory that can generate the multi-field single-derivative terms we consider, and we argue that the EFT we find indeed captures the slow-roll conditions for the background evolution for Chromo-natural inflation. We also show that our EFT can be understood as a multi-field generalization ...

Microstructure and mechanical properties of Mg-Al-Mn-Ca alloy sheet produced by twin roll casting and sequential warm rolling

International Nuclear Information System (INIS)

Wang Yinong; Kang, Suk Bong; Cho, Jaehyung

2011-01-01

Research highlights: → This work, taking AM30 + 0.2Ca alloy as experimental material, will provide some new information as follows: one is microstructural difference between twin roll cast and ingot cast AM31-0.2Ca alloy. The other is the comparison of tensile properties after warm rolling and annealing. Suggesting the possibility of the development of wrought magnesium alloy sheets by strip casting. - Abstract: Microstructural evolution and mechanical properties of twin roll cast (TRC) Mg-3.3 wt.%Al-0.8 wt.%Mn-0.2 wt.%Ca (AM31 + 0.2Ca) alloy strip during warm rolling and subsequent annealing were investigated in this paper. The as-TRC alloy strip shows columnar dendrites in surface and equiaxed dendrites in center regions, as well as finely dispersed primary Al 8 Mn 5 particles on interdendritic boundaries which result in the beneficial effect on microstructural refinement of strip casting. The warm rolled sheets show intensively deformed band or shear band structures, as well as finely and homogeneously dispersed Al-Mn particles. No evident dynamic recrystallization (DRX) takes place during warm rolling process, which is more likely attributed to the finely dispersed particle and high solid solution of Al and Mn atoms in α-Mg matrix. After annealing at 350 deg. C for 1 h, the warm rolled TRC sheets show fine equiaxed grains around 7.8 μm in average size. It has been shown that the present TRC alloy sheet has superior tensile strength and comparative elongation compared to commercial ingot cast (IC) one, suggesting the possibility of the development of wrought magnesium alloy sheets by twin roll strip casting processing. The microstructural evolution during warm rolling and subsequent annealing as well as the resulting tensile properties were analyzed and discussed.

PET and PET/CT in tumour of undetermined origin

International Nuclear Information System (INIS)

Garcia O, J.R.

2007-01-01

In this presentation the following conclusions were obtained regarding the use of PET and PET/CT in patient with cancer of unknown primary: 1. Detection of the primary one in 1/3 at 1/2 of patient. 2. It detects metastases in other places in 50%. 3. It changes the initial therapy planned in 1/3 at 1/2 of patient. 4. Useful in initial phases of protocol study to limit the other procedures. After standard evaluation. Before advanced protocol. 5. PET/CT study increases the % of primary detection, although in a non significant way vs. PET. 6. They are required more studies to value their utility to a more objective manner. (Author)

Clinical applications of PET/CT

International Nuclear Information System (INIS)

Le Ngoc Ha

2011-01-01

The purpose of this article is to review the evolution of PET, PET/CT focusing on the technical aspects, PET radiopharmaceutical developments and current clinical applications as well. The newest technologic advances have been reviewed, including improved crystal design, acquisition modes, reconstruction algorithms, etc. These advancements will continue to improve contrast, decrease noise, and increase resolution. Combined PET/CT system provides faster attenuation correction and useful anatomic correlation to PET functional information. A number of new radiopharmaceuticals used for PET imaging have been developed, however, FDG have been considered as the principal PET radiotracer. The current clinical applications of PET and PET/CT are widespread and include oncology, cardiology and neurology. (author)

Ein „neuer" javanischer Fundort von Phrynoglossus laevis laevis ( Gthr.)

NARCIS (Netherlands)

Brongersma, L.D.

1935-01-01

In der herpetologischen Sammlung, die dem Rijksmuseum van Natuurlijke Historie, Leiden, vor etwa hundert Jahre von Boie und Macklot übersandt wurde, befanden sich zwei Exemplare von Phrynoglossus laevis laevis (Gthr.). Diese Stücke wurden von Van Kampen (1923, p. 232 Fussnote: Oxyglossus laevis) in

ROLLING PROCESS WITH OHSAS AND TEXTURE FORMATION– A REVIEW

Directory of Open Access Journals (Sweden)

P. CHANDRAMOHAN

2009-03-01

Full Text Available Rolling is a mechanical treatment, which plays an important part in the processing of ferrous and nonferrous alloys. Texturing is an important phenomenon that occurs after rolling process. Preferred orientation increases the strength of the material enormously. Hence the research is focused on the rolling studies and the texture formation, which occurs after rolling process. This review mainly focuses on rolling process carried out in different alloys. It also highlights the analysis made on various rolling parameters for improving the mechanical properties. Texture studies carried on various ferrous and non-ferrous alloys; particularly in nitrogen alloyed duplex stainless steel is discussed. Finally the need for implementation of occupational health and safety during a thermomechanical treatment is also discussed. The state of art in this field is encouraging and showing positive signs of commercializing rolled nitrogen alloyed duplex stainless steel after proper texture control.

Flexible indium zinc oxide/Ag/indium zinc oxide multilayer electrode grown on polyethersulfone substrate by cost-efficient roll-to-roll sputtering for flexible organic photovoltaics

International Nuclear Information System (INIS)

Park, Yong-Seok; Kim, Han-Ki

2010-01-01

The authors describe the preparation and characteristics of flexible indium zinc oxide (IZO)-Ag-IZO multilayer electrodes grown on flexible polyethersulfone (PES) substrates using a roll-to-roll sputtering system for use in flexible organic photovoltaics. By the continuous roll-to-roll sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, they were able to fabricate a high quality IZO-Ag-IZO multilayer electrode with a sheet resistance of 6.15 ε/square, optical transmittance of 87.4%, and figure of merit value of 42.03x10 -3 Ω -1 on the PES substrate. In addition, the IZO-Ag-IZO multilayer electrode exhibited superior flexibility to the roll-to-roll sputter grown single ITO electrode due to the existence of a ductile Ag layer between the IZO layers and stable amorphous structure of the IZO film. Furthermore, the flexible organic solar cells (OSCs) fabricated on the roll-to-roll sputter grown IZO-Ag-IZO electrode showed higher power efficiency (3.51%) than the OSCs fabricated on the roll-to-roll sputter grown single ITO electrode (2.67%).

Diagnosis and dosimetry in differentiated thyroid carcinoma using 124I PET: comparison of PET/MRI vs PET/CT of the neck

International Nuclear Information System (INIS)

Nagarajah, James; Jentzen, Walter; Hartung, Verena; Rosenbaum-Krumme, Sandra; Bockisch, Andreas; Stahl, Alexander; Mikat, Christian; Heusner, Till Alexander; Antoch, Gerald

2011-01-01

This study compares intrinsically coregistered 124 I positron emission tomography (PET) and CT (PET/CT) and software coregistered 124 I PET and MRI (PET/MRI) images for the diagnosis and dosimetry of thyroid remnant tissues and lymph node metastases in patients with differentiated thyroid carcinoma (DTC). After thyroidectomy, 33 high-risk DTC patients (stage III or higher) received 124 I PET/CT dosimetry prior to radioiodine therapy to estimate the absorbed dose to lesions and subsequently underwent a contrast-enhanced MRI examination of the neck. Images were evaluated by two experienced nuclear medicine physicians and two radiologists to identify the lesions and to categorize their presumable provenience, i.e. thyroid remnant tissue (TT), lymph node metastasis (LN) and inconclusive tissue. The categorization and dosimetry of lesions was initially performed with PET images alone (PET only). Subsequently lesions were reassessed including the CT and MRI data. The analyses were performed on a patient and on a lesion basis. Patient-based analyses showed that 26 of 33 (79%) patients had at least one lesion categorized as TT on PET only. Of these patients, 11 (42%) and 16 (62%) had a morphological correlate on CT and MRI, respectively, in at least one TT PET lesion. Twelve patients (36%) had at least one lesion classified as LN on PET only. Nine (75%) of these patients had a morphological correlate on both CT and MRI in at least one LN PET lesion. Ten patients (30%) showed at least one lesion on PET only classified as inconclusive. The classification was changed to a clear classification in two patients (two LN) by CT and in four (two TT, two LN) patients by MRI. Lesion-based analyses (n = 105 PET positive lesions) resulted in categorization as TT in 61 cases (58%), 16 (26%) of which had a morphological correlate on CT and 33 (54%) on MRI. A total of 29 lesions (27%) were classified as LN on PET, 18 (62%) of which had a morphological correlate on CT and 24 (83%) on MRI

Clinical Application of F-18 FDG PET (PET/CT) in Colo-rectal and Anal Cancer

International Nuclear Information System (INIS)

Kim, Byung Il

2008-01-01

In the management of colo-retal and anal cancer, accurate staging, treatment evaluation, early detection of recurrence are main clinical problems. F-18 FDG PET (PET/CT) has been reported as useful in the management of colo-rectal and anal cancer because that PET has high diagnostic performance comparing to conventional studies. In case of liver metastases, for confirmation of no extrahepatic metastases, in case of high risk of metastasis, for avoiding unnecessary operation, PET (PET/CT) is expected more useful. In anal cancer, PET is expected useful in lymph node staging. For the early prediction of chemotherapy or radiation therapy effect PET has been reported as useful, also. In early detection of recurrence by PET, cost-benefit advantages has been suggested, also. PET/CT is expected to have higher diagnostic performance than PET alone

Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells

DEFF Research Database (Denmark)

Dupont, Stephanie R.; Oliver, Mark; Krebs, Frederik C

2012-01-01

demonstrate how a thin-film adhesion technique can be applied to flexible organic solar cells to obtain quantitative adhesion values. For the P3HT:PCBM-based BHJ polymer solar cells, the interface of the BHJ with the conductive polymer layer PEDOT:PSS was found to be the weakest. The adhesion fracture energy......The interlayer adhesion of roll-to-roll processed flexible inverted P3HT:PCBM bulk heterojunction (BHJ) polymer solar cells is reported. Poor adhesion between adjacent layers may result in loss of device performance from delamination driven by the thermomechanical stresses in the device. We...... energies was observed....

Roll-to-roll processed polymer tandem solar cells partially processed from water

DEFF Research Database (Denmark)

Larsen-Olsen, Thue Trofod; Andersen, Thomas Rieks; Andreasen, Birgitta

2012-01-01

Large area polymer tandem solar cells completely processed using roll-to-roll (R2R) coating and printing techniques are demonstrated. A stable tandem structure was achieved by the use of orthogonal ink solvents for the coating of all layers, including both active layers. Processing solvents...... included water, alcohols and chlorobenzene. Open-circuit voltages close to the expected sum of sub cell voltages were achieved, while the overall efficiency of the tandem cells was found to be limited by the low yielding back cell, which was processed from water based ink. Many of the challenges associated...

Interlaboratory indoor ageing of roll-to-roll and spin coated organic photovoltaic devices: Testing the ISOS tests

DEFF Research Database (Denmark)

Gevorgyan, Suren A.; Corazza, Michael; Madsen, Morten Vesterager

2014-01-01

to roll-to-roll production. Furthermore, the reproducibility of current–voltage (IV) measurement and preconditioning (light soaking treatments) are addressed. Additionally, the inter-comparison of the degradation rates of the samples aged under three different dark test conditions (ambient, dry/heat, damp...

Clinical Application of F-18 FDG PET (PET/CT) in Malignancy of Unknown Origin

International Nuclear Information System (INIS)

Kim, Byung Il

2008-01-01

Diagnosis of primary origin site in the management of malignancy of unknown origin (MUO) is the most important issue. According to the histopathologic subtype of primary lesion, specialized treatment can be given and survival gain is expected. F-18 FDG PET (PET/CT) has been estimated as useful in detection of primary lesion with high sensitivity and moderate specificity. F-18 FDG PET (PET/CT) study before conventional studies is also recommended because it has high diagnostic performance compared to conventional studies. Although there has few data, F-18 FDG PET (PET/CT) is expected to be useful in diagnosis of recurrence, restaging, evaluation of treatment effect, considering that PET (PET/CT) has been reported as useful in other malignancies

Basic study of entire whole-body PET scanners based on the OpenPET geometry

Energy Technology Data Exchange (ETDEWEB)

Yoshida, Eiji, E-mail: rush@nirs.go.j [National Institute of Radiological Sciences, 4-9-1 Inage-ku, Chiba 263-8555 (Japan); Yamaya, Taiga; Nishikido, Fumihiko; Inadama, Naoko; Murayama, Hideo [National Institute of Radiological Sciences, 4-9-1 Inage-ku, Chiba 263-8555 (Japan)

2010-09-21

A conventional PET scanner has a 15-25 cm axial field-of-view (FOV) and images a whole body using about six bed positions. An OpenPET geometry can extend the axial FOV with a limited number of detectors. The entire whole-body PET scanner must be able to process a large amount of data effectively. In this work, we study feasibility of the fully 3D entire whole-body PET scanner using the GATE simulation. The OpenPET has 12 block detector rings with the ring diameter of 840 mm and each block detector ring consists of 48 depth-of-interaction (DOI) detectors. The OpenPET has the axial length of 895.95 mm with five parts of 58.95 mm open gaps. The OpenPET has higher single data loss than a conventional PET scanner at grouping circuits. NECR of the OpenPET decreases by single data loss. But single data loss is mitigated by separating the axially arranged detector into two parts. Also, multiple coincidences are found to be important for the entire whole-body PET scanner. The entire whole-body PET scanner with the OpenPET geometry promises to provide a large axial FOV with the open space and to have sufficient performance values. But single data loss at the grouping circuits and multiple coincidences are limited to the peak noise equivalent count rate (NECR) for the entire whole-body PET scanner.

Reducing available amounts of heavy metals in contaminated soils by adding iron oxides. Final report; Verringerung der Bioverfuegbarkeit von Schwermetallen in kontaminierten Boeden durch Zugabe von Eisenoxiden. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Pluquet, E; Mueller, I

1998-02-01

This project was part of a German-French research co-operation and investigated the practicability to immobilize heavy metals by adding iron oxides to contaminated soils (harbour sediment, bracky marsh contaminated by emission of a zinc/lead smelter, alluvial Gley soil contaminated by mining activity). Pot and field trials were carried out using three different soils. Five iron bearing materials were added to the soil (1% pure Fe in soil dry matter): Red mud from Al-industry, Fe-precipitation sludge from drinking water treatment, bog iron ore, unused steel shot and steel shot waste from surface treatment of rolled steel plates. When mixed with the soil NH{sub 4}NO{sub 3} and DTPA extractable amounts of heavy metals and uptake by plants was markedly reduced. It was demonstrated that precipitated Fe-bearing sludge from drinking water treatment was a very effective material reducing the NH{sub 4}NO{sub 3} soluble amounts by 40-50% (DTPA 30-40%) in the pot tests while the uptake by plants was reduced by 40% and more. Heavy metals were strongly bound in a fixed order Cd>Pb>Zn>Cu and stayed immobilized until the end of project. Heavy metals were immobilized to a certain extent in field trials, but less effect was observed on concentration in plants and soil extracts compared with the pot tests. In practice the treatment should exceed the 1% pure Fe tested and the application should more homogeneously affect the soil layer where the plant roots mainly grow. (orig.) [Deutsch] Im Rahmen eines deutsch-franzoesischen Projektverbundes wurde die Moeglichkeit der Immobilisierung von Schwermetallen in kontaminierten Boeden durch gezielte Zufuhr von Eisenoxiden untersucht. Die praxisorientierten Untersuchungen wurden in Gefaess- und Feldversuchen mit drei unterschiedlichen Boeden (Spuelfeldboden aus Hafenschlick, immissionsbelastete Brackmarsch, durch Bergbau belasteter Auenboden) ausgefuehrt. Dazu wurden fuenf eisen(oxid)haltige Materialien (Rotschlamm aus der Al

Trends in PET imaging

International Nuclear Information System (INIS)

Moses, William W.

2000-01-01

Positron Emission Tomography (PET) imaging is a well established method for obtaining information on the status of certain organs within the human body or in animals. This paper presents an overview of recent trends PET instrumentation. Significant effort is being expended to develop new PET detector modules, especially those capable of measuring depth of interaction. This is aided by recent advances in scintillator and pixellated photodetector technology. The other significant area of effort is development of special purpose PET cameras (such as for imaging breast cancer or small animals) or cameras that have the ability to image in more than one modality (such as PET / SPECT or PET / X-Ray CT)

High throughput in situ scattering of roll-to-roll coated functional polymer films

DEFF Research Database (Denmark)

Andreasen, Jens Wenzel

2017-01-01

The development of conjugated polymers for organic electronics and photovoltaics has relied heavily on advanced X-ray scattering techniques almost since the earliest studies in the field. Almost from the beginning, structural studies focused on how the polymers self-organize in thin films......, and the relation between chemical configuration of the polymer, structure and performance. This chapter presents the latest developments where structural analysis is applied as in situ characterization of structure formation during roll-to-roll coating of photoactive layers for solar cells....

Movement patterns of limb coordination in infant rolling.

Science.gov (United States)

Kobayashi, Yoshio; Watanabe, Hama; Taga, Gentaro

2016-12-01

Infants must perform dynamic whole-body movements to initiate rolling, a key motor skill. However, little is known regarding limb coordination and postural control in infant rolling. To address this lack of knowledge, we examined movement patterns and limb coordination during rolling in younger infants (aged 5-7 months) that had just begun to roll and in older infants (aged 8-10 months) with greater rolling experience. Due to anticipated difficulty in obtaining measurements over the second half of the rolling sequence, we limited our analysis to the first half. Ipsilateral and contralateral limbs were identified on the basis of rolling direction and were classified as either a stationary limb used for postural stability or a moving limb used for controlled movement. We classified the observed movement patterns by identifying the number of stationary limbs and the serial order of combinational limb movement patterns. Notably, older infants performed more movement patterns that involved a lower number of stationary limbs than younger infants. Despite the wide range of possible movement patterns, a small group of basic patterns dominated in both age groups. Our results suggest that the fundamental structure of limb coordination during rolling in the early acquisition stages remains unchanged until at least 8-10 months of age. However, compared to younger infants, older infants exhibited a greater ability to select an effective rotational movement by positioning themselves with fewer stationary limbs and performing faster limb movements.

Imaging with {sup 124}I in differentiated thyroid carcinoma: is PET/MRI superior to PET/CT?

Energy Technology Data Exchange (ETDEWEB)

Binse, I.; Poeppel, T.D.; Ruhlmann, M.; Gomez, B.; Bockisch, A.; Rosenbaum-Krumme, S.J. [University of Duisburg-Essen, Medical Faculty, Department of Nuclear Medicine, Essen (Germany); Umutlu, L. [University of Duisburg-Essen, Medical Faculty, Department of Radiology, Essen (Germany)

2016-06-15

The aim of this study was to compare integrated PET/CT and PET/MRI for their usefulness in detecting and categorizing cervical iodine-positive lesions in patients with differentiated thyroid cancer using {sup 124}I as tracer. The study group comprised 65 patients at high risk of iodine-positive metastasis who underwent PET/CT (low-dose CT scan, PET acquisition time 2 min; PET/CT{sub 2}) followed by PET/MRI of the neck 24 h after {sup 124}I administration. PET images from both modalities were analysed for the numbers of tracer-positive lesions. Two different acquisition times were used for the comparisons, one matching the PET/CT{sub 2} acquisition time (2 min, PET/MRI{sub 2}) and the other covering the whole MRI scan time (30 min, PET/MRI{sub 30}). Iodine-positive lesions were categorized as metastasis, thyroid remnant or inconclusive according to their location on the PET/CT images. Morphological information provided by MRI was considered for evaluation of lesions on PET/MRI and for volume information. PET/MRI{sub 2} detected significantly more iodine-positive metastases and thyroid remnants than PET/CT{sub 2} (72 vs. 60, p = 0.002, and 100 vs. 80, p = 0.001, respectively), but the numbers of patients with at least one tumour lesion identified were not significantly different (21/65 vs. 17/65 patients). PET/MRI{sub 30} tended to detect more PET-positive metastases than PET/MRI{sub 2} (88 vs. 72), but the difference was not significant (p = 0.07). Of 21 lesions classified as inconclusive on PET/CT, 5 were assigned to metastasis or thyroid remnant when evaluated by PET/MRI. Volume information was available in 34 % of iodine-positive metastases and 2 % of thyroid remnants on PET/MRI. PET/MRI of the neck was found to be superior to PET/CT in detecting iodine-positive lesions. This was attributed to the higher sensitivity of the PET component, Although helpful in some cases, we found no substantial advantage of PET/MRI over PET/CT in categorizing iodine

Der Zusammenhang von Partnermarktopportunitäten aus dem Freundeskreis und der Stabilität von Paarbeziehungen : Eine Analyse mit den Daten des Partnermarktsurvey

OpenAIRE

Häring, Armando

2014-01-01

"Der Beitrag analysiert den Zusammenhang zwischen Partnermarktoportunitäten aus dem Freundeskreis und der Stabilität von Paarbeziehungen. Unter Verwendung des theoretischen Konzepts der Theorie der Interaktionsgelegenheiten sowie von Annahmen der Austauschtheorie und der Familienökonomie, werden mögliche Zusammenhänge zwischen gemeinsamen Freundeskreisen mit dem Partner, Partnermarktgelegenheiten aus dem Freundeskreis (sex ratio) und der Stabilität von Paarbeziehungen diskutiert. Der Beitrag ...

Imaging corn plants with PhytoPET, a modular PET system for plant biology

Energy Technology Data Exchange (ETDEWEB)

Lee, S.; Kross, B.; McKisson, J.; McKisson, J. E.; Weisenberger, A. G.; Xi, W.; Zorn, C.; Bonito, G.; Howell, C. R.; Reid, C. D.; Crowell, A.; Cumberbatch, L. C.; Topp, C.; Smith, M. F.

2013-11-01

PhytoPET is a modular positron emission tomography (PET) system designed specifically for plant imaging. The PhytoPET design allows flexible arrangements of PET detectors based on individual standalone detector modules built from single Hamamatsu H8500 position sensitive photomultiplier tubes and pixelated LYSO arrays. We have used the PhytoPET system to perform preliminary corn plant imaging studies at the Duke University Biology Department Phytotron. Initial evaluation of the PhytoPET system to image the biodistribution of the positron emitting tracer {sup 11}C in corn plants is presented. {sup 11}CO{sub 2} is loaded into corn seedlings by a leaf-labeling cuvette and translocation of {sup 11}C-sugars is imaged by a flexible arrangement of PhytoPET modules on each side. The PhytoPET system successfully images {sup 11}C within corn plants and allows for the dynamic measurement of {sup 11}C-sugar translocation from the leaf to the roots.

Fragen - Nachfragen - Echofragen. Formen und Funktionen von Interrogationen im gesprochenen Deutsch

Directory of Open Access Journals (Sweden)

Rost-Roth, Martina

2003-01-01

Full Text Available Präsentiert werden Befunde aus einer empirischen Untersuchung zu Nachfragen und anderen Fragen in mündlichen Kommunikationen. Ausgangspunkt ist die Beobachtung, daß Beschreibungen von Nachfragen nur in geringer Zahl vorliegen, aus sehr unterschiedlichen Bereichen stammen (Konversationsanalyse, grammatische Beschreibungen von Fragen und Literatur zu Echofragen und sich Beschreibungen von Nachfrageformen sowie Nachfragefunktionen und die jeweils unterstellten Form-Funktions-Bezüge - auch in den einzelnen Bereichen - vielfach widersprechen. Vor diesem Hintergrund ist zentales Anliegen der Untersuchung, einen übergeordneten Analyserahmen für die Befassung mit Frageformen und Fragefunktionen zu entwickeln, der die Beschreibung von Nachfragen in einer allgemeineren Beschreibung von Interrogationen verortet. Das Besondere von Nachfragen wird darin gesehen, daß es sich um Interrogationen handelt, die auf andere sprachliche Äußerungen Bezug nehmen. Hier sind wiederum verschiedene Mittel zu unterscheiden, die für die Unterscheidung von Echofragen und anderen Nachfragen bestimmend sind. In diesem Zusammenhang wird gezeigt, daß auch der Art der Bezugnahme besondere Bedeutung für die Bestimmung von Nachfrageformen und Nachfragefunktionen zukommt. Anhand der Analysen von empirischen Fragevorkommen im gesprochenen Deutsch werden zunächst verschiedene 'Strukturtypen' differenziert. Die Vergleiche von Nachfragen und anderen Fragen zeigen vor allem Unterschiede in Hinblick auf die Frequenz verbloser und elliptischer Frageformulierungen. Daran anschließend werden Nachfragefunktionen im Bereich der Verständnissicherung sowie andere Nachfragefunktionen erörtert. Bei der Suche nach einem gemeinsamen Nenner für sehr unterschiedliche Nachfragefunktionen erweisen sich als zentrale Funktionsparameter :1. die Fokussierungsleistung (über die Bezugnahme auf vorausgehende Äußerungen der Gesprächspartner sowie 2. der Interrogativmodus (über die

Oncology PET imaging

International Nuclear Information System (INIS)

Inubushi, Masayuki

2014-01-01

At the beginning of this article, likening medical images to 'Where is Waldo?' I indicate the concept of diagnostic process of PET/CT imaging, so that medical physics specialists could understand the role of each imaging modality and infer our distress for image diagnosis. Then, I state the present situation of PET imaging and the basics (e.g. health insurance coverage, clinical significance, principle, protocol, and pitfall) of oncology FDG-PET imaging which accounts for more than 99% of all clinical PET examinations in Japan. Finally, I would like to give a wishful prospect of oncology PET that will expand to be more cancer-specific in order to assess therapeutic effects of emerging molecular targeted drugs targeting the 'hallmarks of cancer'. (author)

Experimental determination of heat transfer coefficients in roll bite and air cooling for computer simulations of 1100 MPa carbon steel rolling

Science.gov (United States)

Leinonen, Olli; Ilmola, Joonas; Seppälä, Oskari; Pohjonen, Aarne; Paavola, Jussi; Koskenniska, Sami; Larkiola, Jari

2018-05-01

In modeling of hot rolling pass schedules the heat transfer phenomena have to be known. Radiation to ambient, between rolls and a steel slab as well as heat transfer in contacts must be considered to achieve accurate temperature distribution and thereby accurate material behavior in simulations. Additional heat is generated by friction between the slab and the work roll and by plastic deformation. These phenomena must be taken into account when the effective heat transfer coefficient is determined from experimental data. In this paper we determine the effective heat transfer coefficient at the contact interface and emissivity factor of slab surface for 1100MPa strength carbon steel for hot rolling simulations. Experimental pilot rolling test were carried out and slab temperatures gathered right below the interface and at the mid thickness of the slab. Emissivity factor tests were carried out in the same manner but without rolling. Experimental data is utilized to derive contact heat transfer coefficient at the interface and emissivity factor of slab surface. Pilot rolling test is reproduced in FE-analysis to further refine the heat transfer coefficient and emissivity factor. Material mechanical properties at rolling temperatures were determined by Gleeble™ thermo-mechanical simulator and IDS thermodynamic-kinetic-empirical software.

Rolling at small scales

DEFF Research Database (Denmark)

Nielsen, Kim L.; Niordson, Christian F.; Hutchinson, John W.

2016-01-01

The rolling process is widely used in the metal forming industry and has been so for many years. However, the process has attracted renewed interest as it recently has been adapted to very small scales where conventional plasticity theory cannot accurately predict the material response. It is well....... Metals are known to be stronger when large strain gradients appear over a few microns; hence, the forces involved in the rolling process are expected to increase relatively at these smaller scales. In the present numerical analysis, a steady-state modeling technique that enables convergence without...

[18F]FDG PET/CT outperforms [18F]FDG PET/MRI in differentiated thyroid cancer

International Nuclear Information System (INIS)

Vrachimis, Alexis; Wenning, Christian; Weckesser, Matthias; Stegger, Lars; Burg, Matthias Christian; Allkemper, Thomas; Schaefers, Michael

2016-01-01

To evaluate the diagnostic potential of PET/MRI with [ 18 F]FDG in comparison to PET/CT in patients with differentiated thyroid cancer suspected or known to have dedifferentiated. The study included 31 thyroidectomized and remnant-ablated patients who underwent a scheduled [ 18 F]FDG PET/CT scan and were then enrolled for a PET/MRI scan of the neck and thorax. The datasets (PET/CT, PET/MRI) were rated regarding lesion count, conspicuity, diameter and characterization. Standardized uptake values were determined for all [ 18 F]FDG-positive lesions. Histology, cytology, and examinations before and after treatment served as the standards of reference. Of 26 patients with a dedifferentiated tumour burden, 25 were correctly identified by both [ 18 F]FDG PET/CT and PET/MRI. Detection rates by PET/CT and PET/MRI were 97 % (113 of 116 lesions) and 85 % (99 of 113 lesions) for malignant lesions, and 100 % (48 of 48 lesions) and 77 % (37 of 48 lesions) for benign lesions, respectively. Lesion conspicuity was higher on PET/CT for both malignant and benign pulmonary lesions and in the overall rating for malignant lesions (p < 0.001). There was a difference between PET/CT and PET/MRI in overall evaluation of malignant lesions (p < 0.01) and detection of pulmonary metastases (p < 0.001). Surgical evaluation revealed three malignant lesions missed by both modalities. PET/MRI additionally failed to detect 14 pulmonary metastases and 11 benign lesions. In patients with thyroid cancer and suspected or known dedifferentiation, [ 18 F]FDG PET/MRI was inferior to low-dose [ 18 F]FDG PET/CT for the assessment of pulmonary status. However, for the assessment of cervical status, [ 18 F]FDG PET/MRI was equal to contrast-enhanced neck [ 18 F]FDG PET/CT. Therefore, [ 18 F]FDG PET/MRI combined with a low-dose CT scan of the thorax may provide an imaging solution when high-quality imaging is needed and high-energy CT is undesirable or the use of a contrast agent is contraindicated. (orig.)

CyberPET: a PET service distributed over a wide area

International Nuclear Information System (INIS)

Pilloy, W.J.; Hellwig, D.; Schaeffer, A.; Hoffmann, P.; Lens, V.

2002-01-01

Aim: Demonstration of bi-directional PET data transmission, interactive display and co-registration, for the purpose of correlative imaging, treatment planning and teaching. Material and Method: In the year 2000, the initial problem to attend was to provide an effective PET service to a hospital (in Luxemburg) which lies 150 km away from a PET center (in another country). Once this solved, the procedure was expanded (in 2001) to co-registration with CT/MRI scans performed locally, and with radiotherapy simulation CT performed in another center 25 km away (in 2002). Equipment from various vendors was used (Siemens, Adac, GE, Hermes). With preliminary agreement of the national medical aid, patients are sent from the Nuclear Medicine Dept of the Centre Hospitalier in Luxemburg (CHL) to the Dept NM of the Saarland University Medical Center for PET examination. The digital data are then sent from the Siemens PET camera to a PC connected to the LAN, and then to a FTP server (Healthnet). The data are similarly collected by a PC of the hospital network in Luxemburg, and transferred to a Hermes NM station. The Dicom PET data are converted on the fly to Interfile, displayed interactively as any other tomographic data, printed and available on the NM image server. Since 2001, the PET data are co-registered with whole-body CT data recorded at CHL according to a specific protocol (see other paper of this group). Now in 2002, we are busy implementing the co-registration of PET data and simulation CT data obtained from the Centre Baclesse (CFB, 25 km from CHL) for the treatment planning of brain tumours (input into an ADAC system). Furthermore, we plan to send the data (after deletion of their digital ID) to a (South African) university which does not yet dispose of a PET camera, to allow the training of their registrars. Results: For the end-user clinician at CHL and CFB , the PET data have the quality of 'live data', which can be examined interactively, along with other imaging

Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules

DEFF Research Database (Denmark)

Tanenbaum, David M.; Dam, Henrik Friis; Rösch, R.

2012-01-01

Fully roll-to-roll processed polymer solar cell modules were prepared, characterized, and laminated. Cell modules were cut from the roll and matched pairs were selected, one module with exposed cut edges, the other laminated again with the same materials and adhesive sealing fully around the cut...... edges. The edge sealing rim was 10 mm wide. Cell modules were characterized by periodic measurements of IV curves over extended periods in a variety of conditions, as well as by a variety of spatial imaging techniques. Data show significant stability benefits of the edge sealing process. The results...

Effects of the process temperature and rolling speed on the thermal roll-to-roll imprint lithography of flexible polycarbonate film

International Nuclear Information System (INIS)

Sohn, Ki-Ju; Lee, Woo Il; Park, Jae Hong; Jang, Hyun-Ik; Lee, Dong-Eon

2013-01-01

Thermal roll-to-roll imprint lithography (R2RIL) is a simple and low-cost process for the mass production of micro/nanopatterns. However, in that it relies on highly viscous thermoplastic resists, it is limited in its ability to imprint precise patterns at a high speed. Moreover, the concentrated imprint force applied in R2RIL can damage the resist material which is structurally vulnerable at high process temperatures. Therefore, it is important to understand the temperature- and time-dependent characteristics of the resist material as well as the imprinting mechanism when using thermal R2RIL. In this work, the effects of the process temperature and rolling speed on thermal R2RIL of polycarbonate (PC) films were investigated to improve the process efficiency. Micro-scale line patterns were successfully transferred onto PC films from nickel (Ni) mold stamps. Consequently, line patterns with widths in the range of 5–80 µm were achieved at a traveling speed of 28.6 mm s –1 and process temperature of 150 °C, which is just above the glass transition temperature (T g ). In addition, the patterning performance was investigated for different temperatures, rolling speeds and pattern sizes. The imprinted pattern profiles were measured by an alpha-step surface profiler to investigate the patterning performance. The results show that a much better imprint performance was achieved at 150 °C, compared to the result at temperatures below T g . The physical mechanisms of thermal R2RIL on a PC film were studied by a finite-element analysis and the patterning process was successfully demonstrated by a visco-plastic deformation model. (paper)

Childhood Attachment to Pets: Associations between Pet Attachment, Attitudes to Animals, Compassion, and Humane Behaviour

Directory of Open Access Journals (Sweden)

Roxanne D. Hawkins

2017-05-01

Full Text Available Attachment to pets has an important role in children’s social, emotional, and cognitive development, mental health, well-being, and quality of life. This study examined associations between childhood attachment to pets and caring and friendship behaviour, compassion, and attitudes towards animals. This study also examined socio-demographic differences, particularly pet ownership and pet type. A self-report survey of over one thousand 7 to 12 year-olds in Scotland, UK, revealed that the majority of children are strongly attached to their pets, but attachment scores differ depending on pet type and child gender. Analysis revealed that attachment to pets is facilitated by compassion and caring and pet-directed friendship behaviours and that attachment to pets significantly predicts positive attitudes towards animals. The findings have implications for the promotion of prosocial and humane behaviour. Encouraging children to participate in pet care behaviour may promote attachment between children and their pet, which in turn may have a range of positive outcomes for both children (such as reduced aggression, better well-being, and quality of life and pets (such as humane treatment. This study enhances our understanding of childhood pet attachment and has implications for humane education and promoting secure emotional attachments in childhood.

Borel reductibility and classification of von neumann algebras

DEFF Research Database (Denmark)

Sasyk, R.; Törnquist, Asger Dag

2009-01-01

We announce some new results regarding the classification problem for separable von Neumann algebras. Our results are obtained by applying the notion of Borel reducibility and Hjorth's theory of turbulence to the isomorphism relation for separable von Neumann algebras....

The effect of rolling draughts on texture and microstructure in aluminium

DEFF Research Database (Denmark)

Mishin, Oleg; Juul Jensen, D.; Bay, B.

1999-01-01

The texture gradients and microstructural variations are investigated in commercially pure aluminium plates 40% cold-rolled either with small draughts or with intermediate draughts. In these two samples, different textures are observed near the quarter thickness layer. A pronounced shear texture...... is found in the sample rolled with small draughts, while a rolling texture is observed in the sample rolled with intermediate draughts. Also, significant differences were found in the rolled microstrucrures near the quarter thickness. After rolling with intermediate draughts, extended dislocation...... boundaries preferentially aligned at an angle of about 25-45o to the rolling direction are observed in the longitudinal section. After rolling with small draughts, extended dislocation boundaries are preferentially aligned closer to the rolling direction. These results are discribed and discussed....

Selecting Safe Pets (For Parents)

Science.gov (United States)

... supplies (pet bowls, pet bed, leash, etc.) as gifts, then selecting the pet as a family. That way, everyone has time to really think about whether your family is ready for a pet. Key Questions Before adopting or purchasing any pet, talk to all family members, discuss ...

Roll-to-roll manufacturing of amorphous silicon alloy solar cells with in situ cell performance diagnostics

International Nuclear Information System (INIS)

Izu, M.; Ellison, T.

2003-01-01

In order to meet the price target necessary for widespread use of solar cell products, Energy Conversion Devices, Inc., ECD, has developed and commercialized a continuous roll-to-roll manufacturing technology for the production of a-Si alloy solar cells. Since the early 1980s, we have advanced this technology from a small-scale pilot machine to a large-scale production machine. In 2002, ECD commissioned a 30 MW per year machine for United Solar Systems Corp. in Auburn Hills, Michigan. The RF PECVD a-Si alloy solar cell processor, designed and built by ECD, deposits triple-junction solar cell materials consisting of nine layers of a-Si alloys in a continuous roll-to-roll operation simultaneously on six coils of 130 μm thick, 0.36 m wide, 2.6 km long stainless-steel substrate at 1 cm/s. In order to minimize production losses due to undetected deviations of production conditions and carry on a continuous program of device optimization, we have developed and are incorporating in situ cell performance diagnostic systems. (author)

Diagnostic performance of FDG PET or PET/CT in prosthetic infection after arthroplasty: a meta-analysis

International Nuclear Information System (INIS)

Jin, H.; Yuan, L.; Li, C.; Kan, Y.; Yang, J.; Hao, R.

2014-01-01

The purpose of this study was to systematically review and perform a meta-analysis of published data regarding the diagnostic performance of positron emission tomography (PET) or PET/computed tomography (PET/CT) in prosthetic infection after arthroplasty. A comprehensive computer literature search of studies published through May 31, 2012 regarding PET or PET/CT in patients suspicious of prosthetic infection was performed in PubMed/MEDLINE, Embase and Scopus databases. Pooled sensitivity and specificity of PET or PET/CT in patients suspicious of prosthetic infection on a per prosthesis-based analysis were calculated. The area under the receiver-operating characteristic (ROC) curve was calculated to measure the accuracy of PET or PET/CT in patients with suspicious of prosthetic infection. Fourteen studies comprising 838 prosthesis with suspicious of prosthetic infection after arthroplasty were included in this meta-analysis. The pooled sensitivity of PET or PET/CT in detecting prosthetic infection was 86% (95% confidence interval [CI] 82-90%) on a per prosthesis-based analysis. The pooled specificity of PET or PET/CT in detecting prosthetic infection was 86% (95% CI 83-89%) on a per prosthesis-based analysis. The area under the ROC curve was 0.93 on a per prosthesis-based analysis. In patients suspicious of prosthetic infection, FDG PET or PET/CT demonstrated high sensitivity and specificity. FDG PET or PET/CT are accurate methods in this setting. Nevertheless, possible sources of false positive results and influcing factors should kept in mind.

Diagnostic performance of FDG PET or PET/CT in prosthetic infection after arthroplasty: a meta-analysis.

Science.gov (United States)

Jin, H; Yuan, L; Li, C; Kan, Y; Hao, R; Yang, J

2014-03-01

The purpose of this study was to systematically review and perform a meta-analysis of published data regarding the diagnostic performance of positron emission tomography (PET) or PET/computed tomography (PET/CT) in prosthetic infection after arthroplasty. A comprehensive computer literature search of studies published through May 31, 2012 regarding PET or PET/CT in patients suspicious of prosthetic infection was performed in PubMed/MEDLINE, Embase and Scopus databases. Pooled sensitivity and specificity of PET or PET/CT in patients suspicious of prosthetic infection on a per prosthesis-based analysis were calculated. The area under the receiver-operating characteristic (ROC) curve was calculated to measure the accuracy of PET or PET/CT in patients with suspicious of prosthetic infection. Fourteen studies comprising 838 prosthesis with suspicious of prosthetic infection after arthroplasty were included in this meta-analysis. The pooled sensitivity of PET or PET/CT in detecting prosthetic infection was 86% (95% confidence interval [CI] 82-90%) on a per prosthesis-based analysis. The pooled specificity of PET or PET/CT in detecting prosthetic infection was 86% (95% CI 83-89%) on a per prosthesis-based analysis. The area under the ROC curve was 0.93 on a per prosthesis-based analysis. In patients suspicious of prosthetic infection, FDG PET or PET/CT demonstrated high sensitivity and specificity. FDG PET or PET/CT are accurate methods in this setting. Nevertheless, possible sources of false positive results and influcing factors should kept in mind.

Clinical Applications of FDG PET and PET/CT in Head and Neck Cancer

Directory of Open Access Journals (Sweden)

Akram Al-Ibraheem

2009-01-01

Full Text Available 18F-FDG PET plays an increasing role in diagnosis and management planning of head and neck cancer. Hybrid PET/CT has promoted the field of molecular imaging in head and neck cancer. This modality is particular relevant in the head and neck region, given the complex anatomy and variable physiologic FDG uptake patterns. The vast majority of 18F-FDG PET and PET/CT applications in head and neck cancer related to head and neck squamous cell carcinoma. Clinical applications of 18F-FDG PET and PET/CT in head and neck cancer include diagnosis of distant metastases, identification of synchronous 2nd primaries, detection of carcinoma of unknown primary and detection of residual or recurrent disease. Emerging applications are precise delineation of the tumor volume for radiation treatment planning, monitoring treatment, and providing prognostic information. The clinical role of 18F-FDG PET/CT in N0 disease is limited which is in line with findings of other imaging modalities. MRI is usually used for T staging with an intense discussion concerning the preferable imaging modality for regional lymph node staging as PET/CT, MRI, and multi-slice spiral CT are all improving rapidly. Is this review, we summarize recent literature on 18F-FDG PET and PET/CT imaging of head and neck cancer.

ROLL OUT THE TALENT : Final project report

OpenAIRE

Eerola, Tuomas; Tuominen, Pirjo; Hakkarainen, Riitta-Liisa; Laurikainen, Marja; Mero, Niina

2014-01-01

The ROLL OUT THE TALENT project was born out of the desire to recognise and support the strengths of vocational students and to develop new and innovative operating models. ROLL OUT THE TALENT promoted regional cooperation between institutes and companies. The project produced operating and study path models that take into consideration the individual strengths of vocational students and the principles of lifelong learning. This is the final report of the ROLL OUT THE TALENT project, and ...

Effect of Reduction in Thickness and Rolling Conditions on Mechanical Properties and Microstructure of Rolled Mg-8Al-1Zn-1Ca Alloy

Directory of Open Access Journals (Sweden)

Yuta Fukuda

2017-01-01

Full Text Available A cast Mg-8Al-1Zn-1Ca magnesium alloy was multipass hot rolled at different sample and roll temperatures. The effect of the rolling conditions and reduction in thickness on the microstructure and mechanical properties was investigated. The optimal combination of the ultimate tensile strength, 351 MPa, yield strength, 304 MPa, and ductility, 12.2%, was obtained with the 3 mm thick Mg-8Al-1Zn-1Ca rolled sheet, which was produced with a roll temperature of 80°C and sample temperature of 430°C. This rolling process resulted in the formation of a bimodal structure in the α-Mg matrix, which consequently led to good ductility and high strength, exclusively by the hot rolling process. The 3 mm thick rolled sheet exhibited fine (mean grain size of 2.7 μm and coarse grain regions (mean grain size of 13.6 μm with area fractions of 29% and 71%, respectively. In summary, the balance between the strength and ductility was enhanced by the grain refinement of the α-Mg matrix and by controlling the frequency and orientation of the grains.

Plastic anisotropy of straight and cross rolled molybdenum sheets

International Nuclear Information System (INIS)

Oertel, C.-G.; Huensche, I.; Skrotzki, W.; Knabl, W.; Lorich, A.; Resch, J.

2008-01-01

The microstructure, texture and mechanical properties of molybdenum sheets produced by different rolling processes were investigated by orientation imaging in the scanning electron microscope, X-ray diffraction and tensile tests, respectively. For comparable recrystallization degree of the sheets investigated, straight rolling with low reduction ratio produces α-fiber textures with a maximum at {100} . At higher rolling degrees the maximum shifts to {112} . Cross rolling increases the rotated cube component {100} . The strong differences in the texture measured are reflected in the plastic anisotropy characterized by differences in the yield stress and Lankford parameter which were measured along directions in the rolling plane at angles of 0 deg., 45 deg. and 90 deg. with the rolling direction. The Taylor-Bishop-Hill theory is used successfully to qualitatively explain the plastic anisotropy

Imaging with PET system

International Nuclear Information System (INIS)

Das, B.K.; Noreen Norfaraheen Lee Abdullah

2012-01-01

PET deals with biochemistry and metabolic changes that occur at molecular level. Hence, PET differs fundamentally from other imaging modalities. CT imaging is based on tissue density, whereas MRI conveys anatomic information based on proton density and proton relaxation dynamics. CT and MRI are useful in clinical diagnosis only when disease process has caused significant anatomic alterations. However, in most disease conditions chemical changes precede anatomic changes, that can be detected by PET technology. Thus, PET can provide earliest and unique information about ongoing disease process long before anatomic or structural changes take place. There is no other modality available at present that can replace PET technology. Although PET produces cross-sectional images like that obtained in MRI or CT, they represent circulation, function and metabolism, and not anatomic structure. PET is extremely sensitive measuring quantitatively concentration of tracers in nano to pico-molar range. Thus, PET enables merger of biochemistry and biology in medicine giving birth to molecular medicine that focuses on identifying the molecular errors of disease leading to developing molecular corrections including gene therapy. Molecular imaging with PET has been playing a role in examining the biological nature of a disease condition and its characterization to guide selection and evaluation of treatment. (author)

Ööklubi Club von Überlingen = Club von Überlingen

Index Scriptorium Estoniae

2008-01-01

Ööklubi Club von Überlingen (Madara 22A, Tallinn) sisekujundusest. Sisearhitekt: Taavi Aunre (Boom.ee OÜ). Taavi Aunrest, tema tähtsamad tööd. I-II korruse plaan, 11 värv. vaadet, foto T. Aunrest

Cost-effectiveness of PET and PET/Computed Tomography

DEFF Research Database (Denmark)

Gerke, Oke; Hermansson, Ronnie; Hess, Søren

2015-01-01

measure by means of incremental cost-effectiveness ratios when considering the replacement of the standard regimen by a new diagnostic procedure. This article discusses economic assessments of PET and PET/computed tomography reported until mid-July 2014. Forty-seven studies on cancer and noncancer...

Choline-PET/CT for imaging prostate cancer; Cholin-PET/CT zur Bildgebung des Prostatakarzinoms

Energy Technology Data Exchange (ETDEWEB)

Krause, Bernd Joachim [Klinik- und Poliklinik fuer Nuklearmedizin, Klinikum rechts der Isar, Technische Univ. Muenchen (Germany); Treiber, U.; Schwarzenboeck, S.; Souvatzoglou, M. [Klinik fuer Urologie, Klinikum rechts der Isar, Technische Univ. Muenchen (Germany)

2010-09-15

PET and PET/CT using [{sup 11}C]- and [{sup 18}F]-labelled choline derivatives are increasingly being used for imaging of prostate cancer. The value of PET and PET/CT with [{sup 11}C]- and [{sup 18}F]-labelled choline derivates in biochemical recurrence of prostate cancer has been examined in many studies and demonstrates an increasing importance. Primary prostate cancer can be detected with moderate sensitivity using PET and PET/CT using [{sup 11}C]- and [{sup 18}F]-labelled choline derivatives - the differentiation between benign prostatic hyperplasia, prostatitis or high-grade intraepithelial neoplasia (HGPIN) is not always possible. At the present time [{sup 11}C]choline PET/CT is not recommended in the primary setting but may be utilized in clinically suspected prostate cancer with repeatedly negative prostate biopsies, in preparation of a focused re-biopsy. Promising results have been obtained for the use of PET and PET/CT with [{sup 11}C]- and [{sup 18}F]-labelled choline derivates in patients with biochemical recurrence. The detection rate of choline PET and PET/CT for local, regional, and distant recurrence in patients with a biochemical recurrence shows a linear correlation with PSA values at the time of imaging and reaches about 75% in patients with PSA > 3 ng/mL. At PSA values below 1 ng/mL, the recurrence can be diagnosed with choline PET/CT in approximately 1/3 of the patients. PET and PET/CT with [{sup 11}C]- and [{sup 18}F]choline derivates can be helpful for choosing a therapeutic strategy in the sense of an individualized treatment: since an early diagnosis of recurrence is crucial to the choice of optimal treatment. The localization of the site of recurrence - local recurrence, lymph node metastasis or systemic dissemination - has important influence on the therapy regimen. (orig.)

Tachyon constant-roll inflation

Science.gov (United States)

Mohammadi, A.; Saaidi, Kh.; Golanbari, T.

2018-04-01

The constant-roll inflation is studied where the inflaton is taken as a tachyon field. Based on this approach, the second slow-roll parameter is taken as a constant which leads to a differential equation for the Hubble parameter. Finding an exact solution for the Hubble parameter is difficult and leads us to a numerical solution for the Hubble parameter. On the other hand, since in this formalism the slow-roll parameter η is constant and could not be assumed to be necessarily small, the perturbation parameters should be reconsidered again which, in turn, results in new terms appearing in the amplitude of scalar perturbations and the scalar spectral index. Utilizing the numerical solution for the Hubble parameter, we estimate the perturbation parameter at the horizon exit time and compare it with observational data. The results show that, for specific values of the constant parameter η , we could have an almost scale-invariant amplitude of scalar perturbations. Finally, the attractor behavior for the solution of the model is presented, and we determine that the feature could be properly satisfied.

Von den Liven von Oesel / August Ludwig Schlözer

Index Scriptorium Estoniae

Schlözer, August Ludwig

2008-01-01

Avaldatud Eberhard Winkleri initsiatiivil A. L. Schlözeri teose põhjal: Gesammelte Nachrichten von den Ueberresten der Liven, in Livland und Kurland. (1770), mis moodustab osa teosest: Schlözer, August Ludwig. M. Johann Joseph Haigold's Beylagen zum Neuveränderten Russland. Zweiter Theil. Riga und Leipzig, 1770

Contribution of whole body F-18-FDG-PET and lymphoscintigraphy to the assessment of regional and distant metastases in cutaneous malignant melanoma. A pilot study

Energy Technology Data Exchange (ETDEWEB)

Klein, M.; Freedman, N.; Marciano, R.; Moshe, S.; Chisin, R. [Hadassah Univ. Hospital, Jerusalem (Israel). Dept. of Medical Biophysics and Nuclear Medicine; Lotem, M. [Hadassah Univ. Hospital, Jerusalem (Israel). Dept. of Oncology; Gimon, Z. [Hadassah Univ. Hospital, Jerusalem (Israel). Dept. of Surgery

2000-05-01

II: 17 Patienten mit einem Melanom in der Vorgeschichte wurden einer WB PET zum Follow-up und/oder Restaging unterzogen. Die Ergebnisse wurden bestaetigt oder widerlegt durch andere radiologische Methoden, durch Biopsie oder den klinischen Follow-up. Ergebnisse: Gruppe I: Von 20 SLNs, die durch LS bei 17 Patienten identifiziert wurden waren 18 im WB PET negativ und 2 positiv. 19/20 WB PET-Ergebnisse wurden entweder durch die Histopathologie oder den klinischen Follow-up (20 Mo) bestaetigt. Die Accuracy betrug 94% fuer die Feststellung des SLN-Status. Gruppe II: Die WB PET-Ergebnisse veraenderten das Staging und die Behandlung in 12/17 Patienten und bestaetigten die Validitaet der Behandlung in 3/17 Patienten. Insgesamt hatten 15/17 Patienten (88%) durch WB PET einen Nutzen hinsichtlich der Therapiestrategie. (orig.)

Hybrid FDG-PET/MR compared to FDG-PET/CT in adult lymphoma patients.

Science.gov (United States)

Atkinson, Wendy; Catana, Ciprian; Abramson, Jeremy S; Arabasz, Grae; McDermott, Shanaugh; Catalano, Onofrio; Muse, Victorine; Blake, Michael A; Barnes, Jeffrey; Shelly, Martin; Hochberg, Ephraim; Rosen, Bruce R; Guimaraes, Alexander R

2016-07-01

The goal of this study is to evaluate the diagnostic performance of simultaneous FDG-PET/MR including diffusion compared to FDG-PET/CT in patients with lymphoma. Eighteen patients with a confirmed diagnosis of non-Hodgkin's (NHL) or Hodgkin's lymphoma (HL) underwent an IRB-approved, single-injection/dual-imaging protocol consisting of a clinical FDG-PET/CT and subsequent FDG-PET/MR scan. PET images from both modalities were reconstructed iteratively. Attenuation correction was performed using low-dose CT data for PET/CT and Dixon-MR sequences for PET/MR. Diffusion-weighted imaging was performed. SUVmax was measured and compared between modalities and the apparent diffusion coefficient (ADC) using ROI analysis by an experienced radiologist using OsiriX. Strength of correlation between variables was measured using the Pearson correlation coefficient (r p). Of the 18 patients included in this study, 5 had HL and 13 had NHL. The median age was 51 ± 14.8 years. Sixty-five FDG-avid lesions were identified. All FDG-avid lesions were visible with comparable contrast, and therefore initial and follow-up staging was identical between both examinations. SUVmax from FDG-PET/MR [(mean ± sem) (21.3 ± 2.07)] vs. FDG-PET/CT (mean 23.2 ± 2.8) demonstrated a strongly positive correlation [r s = 0.95 (0.94, 0.99); p < 0.0001]. There was no correlation found between ADCmin and SUVmax from FDG-PET/MR [r = 0.17(-0.07, 0.66); p = 0.09]. FDG-PET/MR offers an equivalent whole-body staging examination as compared with PET/CT with an improved radiation safety profile in lymphoma patients. Correlation of ADC to SUVmax was weak, understating their lack of equivalence, but not undermining their potential synergy and differing importance.

Axial Force Analysis and Roll Contour Configuration of Four-High CVC Mill

Directory of Open Access Journals (Sweden)

Guang-ming Liu

2018-01-01

Full Text Available In order to analyze the influence of technical parameters on work roll axial force of four-high continuous variable crown (CVC mill, the deformation analyzing model with top roll system and strip was established based on influence function method. Then a CVC work roll curve designing scheme was proposed and it was carried out on some cold rolling mill considering the requirement of comprehensive work roll axial force minimization. The status of comprehensive work roll axial force is improved considering the rolling schedule that is beneficial to the roller bearing. Corresponding to the newly designed work roll contour, the backup roll end chamfer was designed considering comprehensive performance of interroll stress concentration, comprehensive work roll axial force, and strip shape control ability. The distribution of roll wear with newly designed backup roll contour is more even according to the field application data. The newly established roll configuration scheme is beneficial to four-high CVC mill.

Ellis Von Creveld Syndrome