Rockwell Hanford Operations effluents and solid waste burials during calendar year 1985

International Nuclear Information System (INIS)

Boothe, G.F.; Aldrich, R.C.; Shay, R.S.; Stanfield, L.J.

1986-07-01

Rockwell Hanford Operations (Rockwell) operates facilities at the Hanford Site under contract to the US Department of Energy (DOE). The facilities generate radioactive and nonradioactive solid, liquid, and airborne wastes that must be disposed of, stored, or discharged to the environment. No radioactive liquid or solid wastes are discharged or disposed of offsite. The quantities of solid, liquid, or gaseous wastes buried or discharged during calendar year (CY) 1985 are reported in this document in compliance with DOE Order 5484.1, ''Environmental Protection, Safety, and Health Protection Information Reporting Requirements.'' In CY 1985, all liquid and airborne discharges of radioactive materials were in compliance with DOE requirements. The Plutonium-Uranium Extraction (PUREX) Facility ammonia scrubber discharge stack (296-A-24) exceeded the Rockwell administrative control value for 106 Ru by a factor of 1.17. All other radioactive airborne discharges were below control values. Two liquid streams exceeded Rockwell administrative control values. The PUREX process condensate stream exceeded the /sup 239,240/Pu control value by a factor of 2.7 and the 241 Pu control value by a factor of 1.6. The PUREX ammonia scrubber stream exceeded the /sup 89,90/Sr control value by a factor of 3.2. All other liquid streams were below control values. The 200 Area power plants operated in compliance with the requirements of the Benton-Franklin-Walla Walla County Air Pollution Control Authority. There were no opacity violations; all deviations from opacity guidelines were promptly reported. Six deviations were reported in CY 1985. Oxides of nitrogen (NO/sub x/) emissions from PUREX and the UO 3 Plant were below annual limits for CY 1985

TurboSP and the Topological Trigger

CERN Document Server

Belavin, Vladislav

2016-01-01

TurboSP was originally proposed as an alternative to Full stream in LHCb data flow. TurboSP is a data flow strategy which not only selects events that should be preserved, like in Full stream, but also provides selective persistence. This is achieved by saving candidates and subset of the reconstruction. During this summer project we investigated the physics viability of using TurboSP with the topological lines and found out a possibility to reduce the number of kept tracks per event by two times while keeping a ratio of fully picked up interesting decay modes on $\\sim 97 \\%$ level.

Dureza Rockwell da madeira de três espécies amazônicas submetidas a ensaios de apodrecimento acelerado Rockwell hardness of the wood of three Amazon species submitted to decay accelerated tests

Directory of Open Access Journals (Sweden)

Diego Martins Stangerlin

2013-04-01

Full Text Available Objetivou-se avaliar o emprego de ensaios de dureza Rockwell na caracterização da biodeterioração das madeiras de Simarouba amara (marupá, Cariniana micrantha (jequitibá e Dipteryx odorata (cumaru, submetidas ao ataque dos fungos apodrecedores Trametes versicolor (podridão branca e Gloeophyllum trabeum (podridão parda. Para tanto, corpos de prova de cada espécie amazônica foram submetidos a ensaios de apodrecimento acelerado, de acordo com a ASTM D2017 (2005, durante 20 semanas. A caracterização da dureza Rockwell foi realizada semanalmente até a 4ª semana e, posteriormente, a cada duas semanas, até a 20ª semana. Adicionalmente, foram determinadas as perdas de massa, conforme critérios estabelecidos pela ASTM D2017 (2005. Quanto aos resultados, destaca-se que a dureza Rockwell pode ser empregada como ferramenta principal na caracterização da biodeterioração da madeira, sendo sensível na predição dos estágios iniciais. Dentre as madeiras amazônicas, o cumaru apresentou a maior resistência natural aos fungos apodrecedores. Com relação aos fungos, a podridão parda atacou mais intensamente as três madeiras amazônicas.This study aimed to evaluate the use of Rockwell hardness in the characterization of the biodeterioration of Simarouba amara (marupá, Cariniana micrantha (jequitibá e Dipteryx odorata (cumaru woods, which were submitted to decay fungi Trametes versicolor (white rot and Gloeophyllum trabeum (brown rot. For this purpose, specimens of each Amazon species were submitted to decay fungi, according to ASTM D2017 (2005. The characterization of the Rockwell hardness was performed weekly until the fourth week, and then every two weeks until the twentieth week. Additionally, it was determined the mass loss, according to criteria established by ASTM D2017 (2005. The results indicated that the Rockwell hardness can be used as a primary tool in the characterization of the biodeterioration of wood, being sensitive in

An overview of turbo decoding on fading channels

OpenAIRE

ATILGAN, Doğan

2009-01-01

A review of turbo coding and decoding has been presented in the literature [1]. In that paper, turbo coding and decoding on AWGN (Additive White Gaussian Noise) channels has been elaborated. In wireless communications, a phenomennon called multipath fading is frequently encountered. Therefore, investigation of efficient techniques to tackle with the destructive effects of fading is essential. Turbo coding has been proven as an efficient channel coding technique for AWGN channels. Some of the ...

Structural dynamics of turbo-machines

CERN Document Server

Rangwala, AS

2009-01-01

The book presents a detailed and comprehensive treatment of structural vibration evaluation of turbo-machines. Starting with the fundamentals of the theory of vibration as related to various aspects of rotating machines, the dynamic analysis procedures of a broad spectrum of turbo-machines is covered. An in-depth procedure for analyzing the torsional and flexural oscillations of the components and of the rotor-bearing system is presented. The latest trends in design and analysis are presented, chief among them: Blade and coupled disk-blade mod

Performance improvement of standard turbo-compressor; Han`yo turbo asshukuki no seino kaizen

Energy Technology Data Exchange (ETDEWEB)

Hokari, T.; Hasegawa, K.; Ozaki, S.; Majima, K. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

1999-05-01

Abradable materials are soft and cause no contact damage to the impeller of the turbo-compressor. Using such materials for the inlet casing facing to the impeller allows very small clearances between the impeller and inlet casing, thus improving the compressor efficiency by 10% over conventional types. Changing the area of abradable material applied to the inlet casing identified the optimum area in which decrease of the compressor surge margin is minimized and efficiency is improved by 10%. As a result, turbo-compressors have the best performance when the abradable materials are applied from the impeller outlet to two-thirds of the forward location of the inlet casing. (author)

Iterative Estimation in Turbo Equalization Process

Directory of Open Access Journals (Sweden)

MORGOS Lucian

2014-05-01

Full Text Available This paper presents the iterative estimation in turbo equalization process. Turbo equalization is the process of reception in which equalization and decoding are done together, not as separate processes. For the equalizer to work properly, it must receive before equalization accurate information about the value of the channel impulse response. This estimation of channel impulse response is done by transmission of a training sequence known at reception. Knowing both the transmitted and received sequence, it can be calculated estimated value of the estimated the channel impulse response using one of the well-known estimation algorithms. The estimated value can be also iterative recalculated based on the sequence data available at the output of the channel and estimated sequence data coming from turbo equalizer output, thereby refining the obtained results.

Progress of High Efficiency Centrifugal Compressor Simulations Using TURBO

Science.gov (United States)

Kulkarni, Sameer; Beach, Timothy A.

2017-01-01

Three-dimensional, time-accurate, and phase-lagged computational fluid dynamics (CFD) simulations of the High Efficiency Centrifugal Compressor (HECC) stage were generated using the TURBO solver. Changes to the TURBO Parallel Version 4 source code were made in order to properly model the no-slip boundary condition along the spinning hub region for centrifugal impellers. A startup procedure was developed to generate a converged flow field in TURBO. This procedure initialized computations on a coarsened mesh generated by the Turbomachinery Gridding System (TGS) and relied on a method of systematically increasing wheel speed and backpressure. Baseline design-speed TURBO results generally overpredicted total pressure ratio, adiabatic efficiency, and the choking flow rate of the HECC stage as compared with the design-intent CFD results of Code Leo. Including diffuser fillet geometry in the TURBO computation resulted in a 0.6 percent reduction in the choking flow rate and led to a better match with design-intent CFD. Diffuser fillets reduced annulus cross-sectional area but also reduced corner separation, and thus blockage, in the diffuser passage. It was found that the TURBO computations are somewhat insensitive to inlet total pressure changing from the TURBO default inlet pressure of 14.7 pounds per square inch (101.35 kilopascals) down to 11.0 pounds per square inch (75.83 kilopascals), the inlet pressure of the component test. Off-design tip clearance was modeled in TURBO in two computations: one in which the blade tip geometry was trimmed by 12 mils (0.3048 millimeters), and another in which the hub flow path was moved to reflect a 12-mil axial shift in the impeller hub, creating a step at the hub. The one-dimensional results of these two computations indicate non-negligible differences between the two modeling approaches.

Piezoelectric Actuator/Sensor Technology at Rockwell

Science.gov (United States)

Neurgaonkar, Ratnakar R.

1996-01-01

We describe the state-of-the art of piezoelectric materials based on perovskite and tungsten bronze families for sensor, actuator and smart structure applications. The microstructural defects in these materials have been eliminated to a large extent and the resulting materials exhibit exceedingly high performance for various applications. The performance of Rockwell actuators/sensors is at least 3 times better than commercially available products. These high performance actuators are being incorporated into various applications including, DOD, NASA and commercial. The multilayer actuator stacks fabricated from our piezoceramics are advantageous for sensing and high capacitance applications. In this presentation, we will describe the use of our high performance piezo-ceramics for actuators and sensors, including multilayer stacks and composite structures.

Rockwell International Hot Laboratory decontamination and dismantlement interim progress report 1987-1996

International Nuclear Information System (INIS)

None

1997-01-01

OAK A271 Rockwell International Hot Laboratory decontamination and dismantlement interim progress report 1987-1996. The Rockwell International Hot Laboratory (RIHL) is one of a number of former nuclear facilities undergoing decontamination and decommissioning (D and D) at the Santa Susana Field Laboratory (SSFL). The RIHL facility is in the later stages of dismantlement, with the final objective of returning the site location to its original natural state. This report documents the decontamination and dismantlement activities performed at the facility over the time period 1988 through 1996. At this time, the support buildings, all equipment associated with the facility, and the entire above-ground structure of the primary facility building (Building 020) have been removed. The basement portion of this building and the outside yard areas (primarily asphalt and soil) are scheduled for D and D activities beginning in 1997

Performance of JPEG Image Transmission Using Proposed Asymmetric Turbo Code

Directory of Open Access Journals (Sweden)

Siddiqi Mohammad Umar

2007-01-01

Full Text Available This paper gives the results of a simulation study on the performance of JPEG image transmission over AWGN and Rayleigh fading channels using typical and proposed asymmetric turbo codes for error control coding. The baseline JPEG algorithm is used to compress a QCIF ( "Suzie" image. The recursive systematic convolutional (RSC encoder with generator polynomials , that is, (13/11 in decimal, and 3G interleaver are used for the typical WCDMA and CDMA2000 turbo codes. The proposed asymmetric turbo code uses generator polynomials , that is, (13/11; 13/9 in decimal, and a code-matched interleaver. The effect of interleaver in the proposed asymmetric turbo code is studied using weight distribution and simulation. The simulation results and performance bound for proposed asymmetric turbo code for the frame length , code rate with Log-MAP decoder over AWGN channel are compared with the typical system. From the simulation results, it is observed that the image transmission using proposed asymmetric turbo code performs better than that with the typical system.

Some problems raised by the operation of large nuclear turbo-generator sets. Automatic control system for steam turbo-generator units

International Nuclear Information System (INIS)

Cecconi, F.

1976-01-01

The design of an appropriate automatic system was found to be useful to improve the control of large size turbo-generator units so as to provide easy and efficient control and monitoring. The experience of the manufacturer of these turbo-generator units allowed a system well suited for this function to be designed [fr

Performance test of a ceramic turbo-viscous pump

International Nuclear Information System (INIS)

Abe, Tetsuya; Hiroki, Seiji; Murakami, Yoshio; Shiraishi, Shigeyuki; Totoura, Sadayuki; Ohtaki, Takashi.

1994-01-01

In the special fields of nuclear fusion facilities and semiconductor production installation, the development of new vacuum pumps which can cope with strong magnetic fields, high temperature gas and corrosive gas is demanded. Mitsubishi Heavy Industries Ltd. has advanced the development of ceramic turbo-molecular pumps and ceramic turbo-viscous pumps, which use ceramic rotors and gas bearings since 1985. The evaluation test of the ceramic turbo-viscous vacuum pump CT-3000H which can evacuate from atmospheric pressure to high vacuum with one pump was carried out, and the experimental results on the performance and the reliability were obtained, therefore, those are reported in this paper. The structure, specification and features of the CT-3000H are shown. The exhaust performance test of the pump was carried out in conformity with the standard of the Vacuum Society of Japan, JVIS 005 'Method of performance test for turbo-molecular pumps'. The gases used were nitrogen and helium. The results are shown. The exhaust test from atmospheric pressure was carried out by two methods, and the results are shown. (K.I.)

A Theoretical Framework for Soft-Information-Based Synchronization in Iterative (Turbo Receivers

Directory of Open Access Journals (Sweden)

Lottici Vincenzo

2005-01-01

Full Text Available This contribution considers turbo synchronization, that is to say, the use of soft data information to estimate parameters like carrier phase, frequency, or timing offsets of a modulated signal within an iterative data demodulator. In turbo synchronization, the receiver exploits the soft decisions computed at each turbo decoding iteration to provide a reliable estimate of some signal parameters. The aim of our paper is to show that such "turbo-estimation" approach can be regarded as a special case of the expectation-maximization (EM algorithm. This leads to a general theoretical framework for turbo synchronization that allows to derive parameter estimation procedures for carrier phase and frequency offset, as well as for timing offset and signal amplitude. The proposed mathematical framework is illustrated by simulation results reported for the particular case of carrier phase and frequency offsets estimation of a turbo-coded 16-QAM signal.

TurboTech Technical Evaluation Automated System

Science.gov (United States)

Tiffany, Dorothy J.

2009-01-01

TurboTech software is a Web-based process that simplifies and semiautomates technical evaluation of NASA proposals for Contracting Officer's Technical Representatives (COTRs). At the time of this reporting, there have been no set standards or systems for training new COTRs in technical evaluations. This new process provides boilerplate text in response to interview style questions. This text is collected into a Microsoft Word document that can then be further edited to conform to specific cases. By providing technical language and a structured format, TurboTech allows the COTRs to concentrate more on the actual evaluation, and less on deciding what language would be most appropriate. Since the actual word choice is one of the more time-consuming parts of a COTRs job, this process should allow for an increase in quantity of proposals evaluated. TurboTech is applicable to composing technical evaluations of contractor proposals, task and delivery orders, change order modifications, requests for proposals, new work modifications, task assignments, as well as any changes to existing contracts.

Leak detection in turbo group condensers using helium

International Nuclear Information System (INIS)

Gomez Cores, C.; Lloret, J.

1997-01-01

This method allows a rapid location of leaks (small or not) in the pipelines of a turbo group condenser, before opening the condenser boxes and no need of stooping the turbo group operation. This operation can last two hours maximum depending on the volume of the box or semi box. The technique consists of injecting helium into the water side and detecting it in the steam side, in the outlet of not condensable gases of the ejector. In the same way, probable air inlet to the condenser can be proved (auxiliary systems, turbo group joints to the condenser, etc.) in order to improve the vacuum and/or reduce the quantity of oxygen dissolved in the water of the steam side. (author) [es

Evaluation of Rockwell HgCdTe arrays for astronomical use

Science.gov (United States)

Lebofsky, M. J.; Montgomery, E. F.; Kailey, W. F.

1986-01-01

The 32 x 32 HgCdTe array manufactured by Rockwell International was proven to be a highly competitive detector type for use at wavelengths shorter than 2.5 microns. The goal of a K=+16 sky survey using this array attached to the Steward Observatory Transit Telescope is clearly within reach. The detector material exhibits high quantum efficiency and low dark currents indicating that its usefulness may extend beyond its use with a CCD readout on groundbased telescopes.

A Proposed Chaotic-Switched Turbo Coding Design and Its Application for Half-Duplex Relay Channel

Directory of Open Access Journals (Sweden)

Tamer H. M. Soliman

2015-01-01

Full Text Available Both reliability and security are two important subjects in modern digital communications, each with a variety of subdisciplines. In this paper we introduce a new proposed secure turbo coding system which combines chaotic dynamics and turbo coding reliability together. As we utilize the chaotic maps as a tool for hiding and securing the coding design in turbo coding system, this proposed system model can provide both data secrecy and data reliability in one process to combat problems in an insecure and unreliable data channel link. To support our research, we provide different schemes to design a chaotic secure reliable turbo coding system which we call chaotic-switched turbo coding schemes. In these schemes the design of turbo codes chaotically changed depending on one or more chaotic maps. Extensions of these chaotic-switched turbo coding schemes to half-duplex relay systems are also described. Results of simulations of these new secure turbo coding schemes are compared to classical turbo codes with the same coding parameters and the proposed system is able to achieve secured reasonable bit error rate performance when it is made to switch between different puncturing and design configuration parameters especially with low switching rates.

Joint research for innovative turbo machines in power stations

Energy Technology Data Exchange (ETDEWEB)

Wiedermann, Alexander [MAN Diesel und Turbo SE, Oberhausen (Germany). AG Turbo; Jeschke, Peter [RWTH, Aachen (Germany). AG Turbo; Goldschmidt, Dirk [SIEMENS AG, Muelheim a.d. Ruhr (Germany). AG Turbo

2013-04-01

AG Turbo, established about 25 years ago, is a platform where pre-competitive, application-oriented turbo machinery research in Germany is agreed and coordinated. Focus of the research is on turbo machines which are responsible for energy conversion in conventional fossil-fired or combined cycle power plants (CCGT), as well as compressor trains for capturing and transporting the greenhouse gas CO{sub 2}. At all stages of the technical process - from gas compression through combustion in gas turbine combustors to expansion in the turbine - innovations are needed to actually meet the targets for efficiency, reliability, as well as protection of the climate and environment. Research results achieved will be presented using selected examples and an outlook at future activities will be given.

TurboFold: Iterative probabilistic estimation of secondary structures for multiple RNA sequences

Directory of Open Access Journals (Sweden)

Sharma Gaurav

2011-04-01

Full Text Available Abstract Background The prediction of secondary structure, i.e. the set of canonical base pairs between nucleotides, is a first step in developing an understanding of the function of an RNA sequence. The most accurate computational methods predict conserved structures for a set of homologous RNA sequences. These methods usually suffer from high computational complexity. In this paper, TurboFold, a novel and efficient method for secondary structure prediction for multiple RNA sequences, is presented. Results TurboFold takes, as input, a set of homologous RNA sequences and outputs estimates of the base pairing probabilities for each sequence. The base pairing probabilities for a sequence are estimated by combining intrinsic information, derived from the sequence itself via the nearest neighbor thermodynamic model, with extrinsic information, derived from the other sequences in the input set. For a given sequence, the extrinsic information is computed by using pairwise-sequence-alignment-based probabilities for co-incidence with each of the other sequences, along with estimated base pairing probabilities, from the previous iteration, for the other sequences. The extrinsic information is introduced as free energy modifications for base pairing in a partition function computation based on the nearest neighbor thermodynamic model. This process yields updated estimates of base pairing probability. The updated base pairing probabilities in turn are used to recompute extrinsic information, resulting in the overall iterative estimation procedure that defines TurboFold. TurboFold is benchmarked on a number of ncRNA datasets and compared against alternative secondary structure prediction methods. The iterative procedure in TurboFold is shown to improve estimates of base pairing probability with each iteration, though only small gains are obtained beyond three iterations. Secondary structures composed of base pairs with estimated probabilities higher than a

Turbo marketing through time compression.

Science.gov (United States)

Kotler, P; Stonich, P J

1991-01-01

A host of advantages will flow to companies that learn to make and deliver goods and services faster than their competitors. However, four key questions must be answered to determine if a turbo marketing approach is suitable for your company.

Study of bifurcation behavior of two-dimensional turbo product code decoders

International Nuclear Information System (INIS)

He Yejun; Lau, Francis C.M.; Tse, Chi K.

2008-01-01

Turbo codes, low-density parity-check (LDPC) codes and turbo product codes (TPCs) are high performance error-correction codes which employ iterative algorithms for decoding. Under different conditions, the behaviors of the decoders are different. While the nonlinear dynamical behaviors of turbo code decoders and LDPC decoders have been reported in the literature, the dynamical behavior of TPC decoders is relatively unexplored. In this paper, we investigate the behavior of the iterative algorithm of a two-dimensional TPC decoder when the input signal-to-noise ratio (SNR) varies. The quantity to be measured is the mean square value of the posterior probabilities of the information bits. Unlike turbo decoders or LDPC decoders, TPC decoders do not produce a clear 'waterfall region'. This is mainly because the TPC decoding algorithm does not converge to 'indecisive' fixed points even at very low SNR values

Turbo-SMT: Parallel Coupled Sparse Matrix-Tensor Factorizations and Applications

Science.gov (United States)

Papalexakis, Evangelos E.; Faloutsos, Christos; Mitchell, Tom M.; Talukdar, Partha Pratim; Sidiropoulos, Nicholas D.; Murphy, Brian

2016-01-01

How can we correlate the neural activity in the human brain as it responds to typed words, with properties of these terms (like ’edible’, ’fits in hand’)? In short, we want to find latent variables, that jointly explain both the brain activity, as well as the behavioral responses. This is one of many settings of the Coupled Matrix-Tensor Factorization (CMTF) problem. Can we enhance any CMTF solver, so that it can operate on potentially very large datasets that may not fit in main memory? We introduce Turbo-SMT, a meta-method capable of doing exactly that: it boosts the performance of any CMTF algorithm, produces sparse and interpretable solutions, and parallelizes any CMTF algorithm, producing sparse and interpretable solutions (up to 65 fold). Additionally, we improve upon ALS, the work-horse algorithm for CMTF, with respect to efficiency and robustness to missing values. We apply Turbo-SMT to BrainQ, a dataset consisting of a (nouns, brain voxels, human subjects) tensor and a (nouns, properties) matrix, with coupling along the nouns dimension. Turbo-SMT is able to find meaningful latent variables, as well as to predict brain activity with competitive accuracy. Finally, we demonstrate the generality of Turbo-SMT, by applying it on a Facebook dataset (users, ’friends’, wall-postings); there, Turbo-SMT spots spammer-like anomalies. PMID:27672406

Homotopy Analysis Method for Boundary-Value Problem of Turbo Warrant Pricing under Stochastic Volatility

Directory of Open Access Journals (Sweden)

Hoi Ying Wong

2013-01-01

Full Text Available Turbo warrants are liquidly traded financial derivative securities in over-the-counter and exchange markets in Asia and Europe. The structure of turbo warrants is similar to barrier options, but a lookback rebate will be paid if the barrier is crossed by the underlying asset price. Therefore, the turbo warrant price satisfies a partial differential equation (PDE with a boundary condition that depends on another boundary-value problem (BVP of PDE. Due to the highly complicated structure of turbo warrants, their valuation presents a challenging problem in the field of financial mathematics. This paper applies the homotopy analysis method to construct an analytic pricing formula for turbo warrants under stochastic volatility in a PDE framework.

Performance of Turbo Interference Cancellation Receivers in Space-Time Block Coded DS-CDMA Systems

Directory of Open Access Journals (Sweden)

Emmanuel Oluremi Bejide

2008-07-01

Full Text Available We investigate the performance of turbo interference cancellation receivers in the space time block coded (STBC direct-sequence code division multiple access (DS-CDMA system. Depending on the concatenation scheme used, we divide these receivers into the partitioned approach (PA and the iterative approach (IA receivers. The performance of both the PA and IA receivers is evaluated in Rayleigh fading channels for the uplink scenario. Numerical results show that the MMSE front-end turbo space-time iterative approach receiver (IA effectively combats the mixture of MAI and intersymbol interference (ISI. To further investigate the possible achievable data rates in the turbo interference cancellation receivers, we introduce the puncturing of the turbo code through the use of rate compatible punctured turbo codes (RCPTCs. Simulation results suggest that combining interference cancellation, turbo decoding, STBC, and RCPTC can significantly improve the achievable data rates for a synchronous DS-CDMA system for the uplink in Rayleigh flat fading channels.

Turbo decoder architecture for beyond-4G applications

CERN Document Server

Wong, Cheng-Chi

2013-01-01

This book describes the most recent techniques for turbo decoder implementation, especially for 4G and beyond 4G applications. The authors reveal techniques for the design of high-throughput decoders for future telecommunication systems, enabling designers to reduce hardware cost and shorten processing time. Coverage includes an explanation of VLSI implementation of the turbo decoder, from basic functional units to advanced parallel architecture. The authors discuss both hardware architecture techniques and experimental results, showing the variations in area/throughput/performance with respec

Space-Time Turbo Trellis Coded Modulation for Wireless Data Communications

Directory of Open Access Journals (Sweden)

Welly Firmanto

2002-05-01

Full Text Available This paper presents the design of space-time turbo trellis coded modulation (ST turbo TCM for improving the bandwidth efficiency and the reliability of future wireless data networks. We present new recursive space-time trellis coded modulation (STTC which outperform feedforward STTC proposed in by Tarokh et al. (1998 and Baro et al. (2000 on slow and fast fading channels. A substantial improvement in performance can be obtained by constructing ST turbo TCM which consists of concatenated recursive STTC, decoded by iterative decoding algorithm. The proposed recursive STTC are used as constituent codes in this scheme. They have been designed to satisfy the design criteria for STTC on slow and fast fading channels, derived for systems with the product of transmit and receive antennas larger than 3. The proposed ST turbo TCM significantly outperforms the best known STTC on both slow and fast fading channels. The capacity of this scheme on fast fading channels is less than 3 dB away from the theoretical capacity bound for multi-input multi-output (MIMO channels.

Study of bifurcation behavior of two-dimensional turbo product code decoders

Energy Technology Data Exchange (ETDEWEB)

He Yejun [Department of Electronic and Information Engineering, Hong Kong Polytechnic University, Hunghom, Hong Kong (China); Lau, Francis C.M. [Department of Electronic and Information Engineering, Hong Kong Polytechnic University, Hunghom, Hong Kong (China)], E-mail: encmlau@polyu.edu.hk; Tse, Chi K. [Department of Electronic and Information Engineering, Hong Kong Polytechnic University, Hunghom, Hong Kong (China)

2008-04-15

Turbo codes, low-density parity-check (LDPC) codes and turbo product codes (TPCs) are high performance error-correction codes which employ iterative algorithms for decoding. Under different conditions, the behaviors of the decoders are different. While the nonlinear dynamical behaviors of turbo code decoders and LDPC decoders have been reported in the literature, the dynamical behavior of TPC decoders is relatively unexplored. In this paper, we investigate the behavior of the iterative algorithm of a two-dimensional TPC decoder when the input signal-to-noise ratio (SNR) varies. The quantity to be measured is the mean square value of the posterior probabilities of the information bits. Unlike turbo decoders or LDPC decoders, TPC decoders do not produce a clear 'waterfall region'. This is mainly because the TPC decoding algorithm does not converge to 'indecisive' fixed points even at very low SNR values.

Long life technology work at Rockwell International Space Division

Science.gov (United States)

Huzel, D. K.

1974-01-01

This paper presents highlights of long-life technology oriented work performed at the Space Division of Rockwell International Corporation under contract to NASA. This effort included evaluation of Saturn V launch vehicle mechanical and electromechanical components for potential extended life capabilities, endurance tests, and accelerated aging experiments. A major aspect was evaluation of the components at the subassembly level (i.e., at the interface between moving surfaces) through in-depth wear analyses and assessments. Although some of this work is still in progress, preliminary conclusions are drawn and presented, together with the rationale for each. The paper concludes with a summary of the effort still remaining.

Interleaver Design for Turbo Coding

DEFF Research Database (Denmark)

Andersen, Jakob Dahl; Zyablov, Viktor

1997-01-01

By a combination of construction and random search based on a careful analysis of the low weight words and the distance properties of the component codes, it is possible to find interleavers for turbo coding with a high minimum distance. We have designed a block interleaver with permutations...

Improving 3D-Turbo Code's BER Performance with a BICM System over Rayleigh Fading Channel

Directory of Open Access Journals (Sweden)

R. Yao

2016-12-01

Full Text Available Classical Turbo code suffers from high error floor due to its small Minimum Hamming Distance (MHD. Newly-proposed 3D-Turbo code can effectively increase the MHD and achieve a lower error floor by adding a rate-1 post encoder. In 3D-Turbo codes, part of the parity bits from the classical Turbo encoder are further encoded through the post encoder. In this paper, a novel Bit-Interleaved Coded Modulation (BICM system is proposed by combining rotated mapping Quadrature Amplitude Modulation (QAM and 3D-Turbo code to improve the Bit Error Rate (BER performance of 3D-Turbo code over Raleigh fading channel. A key-bit protection scheme and a Two-Dimension (2D iterative soft demodulating-decoding algorithm are developed for the proposed BICM system. Simulation results show that the proposed system can obtain about 0.8-1.0 dB gain at BER of 10^{-6}, compared with the existing BICM system with Gray mapping QAM.

The research of atmospheric 2D optical PPM CDMA system with turbo coding

Science.gov (United States)

Zhou, Xiuli; Li, Zaoxia

2007-11-01

The atmospheric two-dimensional optical code-division multiple-access (CDMA) systems using pulse-position modulation (PPM) and Turbo-coded were presented. We analyzed the bit-error rate (BER) of the proposed system using pulse-position modulation (PPM) with considering the effects of the scintillation, avalanche photodiode noise, thermal noise, and multi-user interference. We showed that the atmospheric two dimensional (2D) optical PPM CDMA systems can realize high-speed communications when the logarithm variance of the scintillation is less than 0.1, and the turbo-coded atmospheric optical CDMA system has better bit error rate(BER) performance than the atmospheric optical PPM CDMA systems without turbo-coded. We also showed that the turbo-coded system has better performance than the multi-user detection system.

A New Way of Doing Business: Reusable Launch Vehicle Advanced Thermal Protection Systems Technology Development: NASA Ames and Rockwell International Partnership

Science.gov (United States)

Carroll, Carol W.; Fleming, Mary; Hogenson, Pete; Green, Michael J.; Rasky, Daniel J. (Technical Monitor)

1995-01-01

NASA Ames Research Center and Rockwell International are partners in a Cooperative Agreement (CA) for the development of Thermal Protection Systems (TPS) for the Reusable Launch Vehicle (RLV) Technology Program. This Cooperative Agreement is a 30 month effort focused on transferring NASA innovations to Rockwell and working as partners to advance the state-of-the-art in several TPS areas. The use of a Cooperative Agreement is a new way of doing business for NASA and Industry which eliminates the traditional customer/contractor relationship and replaces it with a NASA/Industry partnership.

Turbo FRMAC 2018

Energy Technology Data Exchange (ETDEWEB)

2017-11-30

The Turbo FRMAC (TF) software program is the software implementation of the science and methodologies utilized in the Federal Radiological Monitoring and Assessment Center (FRMAC). The software automates the calculations described in volumes 1 of "The Federal Manual for Assessing Environmental Data during a Radiological Emergency" (2015 version). In the event of the intentional or accidental release of radioactive material, the software is used to guide and govern the response of the Federal, State, Local, and Tribal governments. The manual, upon which the software is based, is unclassified and freely available on the Internet.

The LHCb Turbo stream

Energy Technology Data Exchange (ETDEWEB)

Puig, A., E-mail: albert.puig@cern.ch

2016-07-11

The LHCb experiment will record an unprecedented dataset of beauty and charm hadron decays during Run II of the LHC, set to take place between 2015 and 2018. A key computing challenge is to store and process this data, which limits the maximum output rate of the LHCb trigger. So far, LHCb has written out a few kHz of events containing the full raw sub-detector data, which are passed through a full offline event reconstruction before being considered for physics analysis. Charm physics in particular is limited by trigger output rate constraints. A new streaming strategy includes the possibility to perform the physics analysis with candidates reconstructed in the trigger, thus bypassing the offline reconstruction. In the Turbo stream the trigger will write out a compact summary of physics objects containing all information necessary for analyses. This will allow an increased output rate and thus higher average efficiencies and smaller selection biases. This idea will be commissioned and developed during 2015 with a selection of physics analyses. It is anticipated that the turbo stream will be adopted by an increasing number of analyses during the remainder of LHC Run II (2015–2018) and ultimately in Run III (starting in 2020) with the upgraded LHCb detector.

Turbo Equalization for Digital Coherent Receivers

DEFF Research Database (Denmark)

Arlunno, Valeria; Caballero Jambrina, Antonio; Borkowski, Robert

2014-01-01

. In this paper, it is demonstrated that Turbo Equalization routines can be used to mitigate performance degradations stemming from optical fiber propagation effects both in optical fiber dispersion managed and unmanaged coherent detection links. The effectiveness of this solution is analyzed both numerically...

Development and tests of large nuclear turbo-generator welded rotors

International Nuclear Information System (INIS)

Colombie, H.; Thiery, M.; Rotzinger, R.; Pelissou, C.; Tabacco, C.; Fernagut, V.

2015-01-01

Turbo-generators require large forgings for the rotor and it is a worldwide practice to manufacture turbo-generator rotor bodies as single piece forgings. Rotors for nuclear applications (4-pole rotors design, 1500/1800 rpm) require forgings of up to 2.0 m diameter and ultra large ingots with weight more than 500 tons. Nowadays only few forge masters can deliver such forgings in the world. Based on the large welding experience Alstom has gained over decades on steam and gas turbines and Alstom's multi piece shrunk turbo-generator rotors, it was suggested to manufacture 4-pole turbo-generator rotors by welding the shaft from aligned cylindrical forgings. Compared to turbine welded rotors, the shaft of a turbo-generator rotor presents differences linked to dimensions/weight, weld depth and electrical application. The manufacture of a 2 disc model allowed to prove through electrical and mechanical analysis the reliability of the concept as well as the reliability of the manufacturing processes through material tests, micro sections, electrical component tests, weld geometry, welding processes (TIG,SAW,...), weld inspection (Ultrasonic testing, radiographic inspection,...) weld heat treatments and machining. Then a full rotor able to replace a single forging rotor was manufactured in order to validate and prove to potential customers the validity of the welded rotor technology. During the first order from EDF of a welded 900 MW spare rotor, the procedure for the Non Destructive Test on a slotted rotor was developed upon EDF request in order to compare future Non Destructive Testing with the finger print of the new rotor. This complete rotor was delivered to EDF in January 2013. This rotor is in operation in a nuclear unit since November 2013. (authors)

EXPANSION OF TURBO PROLOGUE PROGRAMMING SYSTEM BY PREDICATES FOR LIST PROCESSING

Directory of Open Access Journals (Sweden)

A. T. Kovalkov

2008-01-01

Full Text Available Lists are considered as a main data structure in logic Turbo Prologue programming language. However the language does not contain in-set predicates (procedures for list processing. In order to facilitate a problem programming process where lists are used it is proposed to apply a Turbo Prologue version that has a set of predicates in the form of recursive rules for executing frequently repeated operations with lists such as unification of lists, italicization and deletion of some list elements, sorting-out, list reversing and many others. The modified version contains a reference to new input predicates. The proposed Turbo Prologue version is easily expanded by new rules. Usage of this version makes programmer’s work easier and promotes development of new programs where it is necessary to work with lists.

Design and Development of a 200-kW Turbo-Electric Distributed Propulsion Testbed

Science.gov (United States)

Papathakis, Kurt V.

2017-01-01

There a few NASA funded electric and hybrid electric projects from different NASA Centers, including the NASA Armstrong Flight Research Center (AFRC) (Edwards, California). Each project identifies a specific technology gap that is currently inhibiting the growth and proliferation of relevant technologies in commercial aviation. This paper describes the design and development of a turbo-electric distributed propulsion (TeDP) hardware-in-the-loop (HIL) simulation bench, which is a test bed for discovering turbo-electric control, distributed electric control, power management control, and integration competencies while providing risk mitigation for future turbo-electric flying demonstrators.

Pico-coulomb charge measured at BELLA to percent-level precision using a Turbo-ICT

International Nuclear Information System (INIS)

Nakamura, K; Mittelberger, D E; Gonsalves, A J; Daniels, J; Mao, H-S; Leemans, W P; Stulle, F; Bergoz, J

2016-01-01

Precise diagnostics of picocoulomb level particle bunches produced by laser plasma accelerators (LPAs) can be a significant challenge. Without proper care, the small signals associated with such bunches can be dominated by a background generated by laser, target, laser–plasma interaction and particle induced radiation. In this paper, we report on first charge measurements using the newly developed Turbo-ICT for LPAs. We outline the Turbo-ICT working principle, which allows precise sub-picocoulomb measurements even in the presence of significant background signals. A comparison of the Turbo-ICT, a conventional integrating current transformer (ICT) and a scintillating screen (Lanex) was carried out at the Berkeley Lab Laser Accelerator. Results show that the Turbo-ICT can measure sub-picocoulomb charge accurately and has significantly improved noise immunity compared to the ICT. (paper)

Pico-coulomb charge measured at BELLA to percent-level precision using a Turbo-ICT

Science.gov (United States)

Nakamura, K.; Mittelberger, D. E.; Gonsalves, A. J.; Daniels, J.; Mao, H.-S.; Stulle, F.; Bergoz, J.; Leemans, W. P.

2016-03-01

Precise diagnostics of picocoulomb level particle bunches produced by laser plasma accelerators (LPAs) can be a significant challenge. Without proper care, the small signals associated with such bunches can be dominated by a background generated by laser, target, laser-plasma interaction and particle induced radiation. In this paper, we report on first charge measurements using the newly developed Turbo-ICT for LPAs. We outline the Turbo-ICT working principle, which allows precise sub-picocoulomb measurements even in the presence of significant background signals. A comparison of the Turbo-ICT, a conventional integrating current transformer (ICT) and a scintillating screen (Lanex) was carried out at the Berkeley Lab Laser Accelerator. Results show that the Turbo-ICT can measure sub-picocoulomb charge accurately and has significantly improved noise immunity compared to the ICT.

Evolution of containment facilities for spectroscopic analysis at Rockwell Hanford Operations

International Nuclear Information System (INIS)

Hiller, J.M.

1984-01-01

The analysis of radioactive material requires much thought concerning getting the job done while still maintaining a safe working environment. A Rockwell Hanford Operations, several stages of evolution in instrumentation for spectroscopic elemental analysis have evolved, reflecting different philosophies respect to shielding and contamination control. Atomic absorption and inductively coupled plasma emission spectroscopic systems have been used for analyzing samples in support of a fission product recovery plant, nuclear waste processing and characterization programs, and U and Pu separation plants. Design thoughts, criticisms, and lessons learned in 20 years of containment for spectroscopic analysis are presented

'Turbo' coding for deep space applications

DEFF Research Database (Denmark)

Andersen, Jakob Dahl

1995-01-01

The performance of the `turbo' coding scheme is measured and an error floor is discovered. These residual errors are corrected with an outer BCH code. The complexity of the system is discussed, and for low data rates a realizable system operating at Eb/N0 below 0.2 dB is presented...

A 220 MVA turbo-generator for the TCV tokamak power supplies

International Nuclear Information System (INIS)

Perez, A.; Canay, I.M.; Simond, J.-J.; Morf, J.-J; Pahud, J.-D; Seysen, R.

1989-01-01

A new 220 MVA, 120 Hz, 4 pole turbo-generator will be used as a pulsed power source to supply the toroidal and poloidal power supplies of the TCV tokamak, which is being built at the Ecole Polytechnique Federale de Lausanne in Switzerland. The paper describes the particular requirements of the TCV poloidal power supplies and the main electrical and mechanical features of the turbo-generator and its principal auxillaries. (author). 6 figs.; 1 tab

Counteracting 16-QAM Optical Fiber Transmission Impairments With Iterative Turbo Equalization

DEFF Research Database (Denmark)

Arlunno, Valeria; Caballero Jambrina, Antonio; Borkowski, Robert

2013-01-01

A turbo equalization (TE) scheme based on convolutional code and normalized least mean square equalizer for coherent optical communication links is proposed and experimentally demonstrated. The proposed iterative TE technique is proved effective for counteracting polarization-division-multiplexin......A turbo equalization (TE) scheme based on convolutional code and normalized least mean square equalizer for coherent optical communication links is proposed and experimentally demonstrated. The proposed iterative TE technique is proved effective for counteracting polarization...

LHCb Turbo++ Slimming: Inclusive B Hadron Decay Product Selection

CERN Document Server

Bogensberger, David

2016-01-01

My summer student project focused on reducing the turbo++ output bandwidth for B meson decays at LHCb. The aim is to discard as many of the background tracks as possible, while still retaining almost all of the signal events. I analysed the ability to distinguish signal from background tracks, by considering four different B meson decays, while using signal definitions for just one particular decay, as well as for a general type of decay. I added tracks to a triggered turbo candidate, to reconstruct the B meson. I used a boosted decision tree and an artificial neural network to classify events, and compared the resulting ROC curves.

First-pass myocardial perfusion MR imaging with gadolinium-enhanced turbo FLASH

International Nuclear Information System (INIS)

Teresi, L.M.; Smith, C.; Messenger, J.; Watanabe, A.; Herbst, M.; O'Sullivan, R.M.; Lee, R.; Remer, J.; Rappaport, A.; Bradley, W.G.

1990-01-01

This paper determines the efficacy of MR first-pass myocardial perfusion imaging using gadolinium-enhanced Turbo--fast low-angle shot (FLASH) ultrafast imaging combined with MR systolic wall thickening data for the determination of myocardial viability. Five normal volunteers and five patients with remote myocardial infarction were studied on a 1.5-T imaging system (Siemans, Ehrlangen, NJ). Turbo-FLASH imaging utilized a 180 degrees inversion pulse followed by a rapid gradient-echo sequence (TI 400 msec, TE2 msec, TR 4.9 msec, FA 8 degrees) with a complete 64 x 64 matrix image (300 mm FOV) being acquired in 300 msec. First-pass myocardial perfusion imaging was performed in the short-axis and long-axis oblique projections with a concantenated series of Turbo-FLASH images triggered to end-systole acquired immediately before and during a rapid bolus injection of 5cc gadolinium-DTPA

Evolution of containment facilities for spectroscopic analysis at Rockwell Hanford Operations

International Nuclear Information System (INIS)

Hiller, J.M.

1984-01-01

The analysis of radioactive material requires much thought concerning getting the job done while still maintaining a safe working environment. At Rockwell Hanford Operations, we have gone through several stages of evolution in instrumentation for spectroscopic elemental analysis, reflecting different philosophies with respect to shielding and contamination control. Atomic absorption and inductively coupled plasma emission spectroscopic systems have been used for analyzing samples in support of a fission product recovery plant, nuclear waste processing and characterization programs, and U and Pu separation plants. Design thoughts, criticisms, and lessons learned in 20 years of containment for spectroscopic analysis are presented. 3 refs., 6 figs., 2 tabs

Preliminary Validation and Verification of TURBO{sub D}ESIGN for S-CO{sub 2} Axial Compressor

Energy Technology Data Exchange (ETDEWEB)

Lee, Je Kyoung; Lee, Jeong Ik; Ahn, Yoon Han; Kim, Seong Gu [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Yoon, Ho Joon; Addad, Yacine [Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates)

2012-05-15

To use the advantages of Supercritical CO{sub 2}(S-CO{sub 2}) Brayton cycle for nuclear power plant, KAIST-Khalifa University joint research team has been focusing on S-CO{sub 2} turbomachinery development. TURBO{sub D}ESIGN code is one of the products of our researches to design a turbomachinery. The major feature of TURBO{sub D}ESIGN is that the formulation is based on the real gas and none of the ideal gas assumption was applied to the code. Thus, TURBO{sub D}ESIGN has high flexibility regarding the type of gases. In this paper, preliminary code validation and verification of TURBO{sub D}ESIGN will be discussed for axial type compressor design

Optimization design of turbo-expander gas bearing for a 500W helium refrigerator

Science.gov (United States)

Li, S. S.; Fu, B.; Y Zhang, Q.

2017-12-01

Turbo-expander is the core machinery of the helium refrigerator. Bearing as the supporting element is the core technology to impact the design of turbo-expander. The perfect design and performance study for the gas bearing are essential to ensure the stability of turbo-expander. In this paper, numerical simulation is used to analyze the performance of gas bearing for a 500W helium refrigerator turbine, and the optimization design of the gas bearing has been completed. And the results of the gas bearing optimization have a guiding role in the processing technology. Finally, the turbine experiments verify that the gas bearing has good performance, and ensure the stable operation of the turbine.

Introduction to littoral erosion problem in Uraba (Arboletes-Turbo area) Colombian Caribbean Coast

International Nuclear Information System (INIS)

Correa; Ivan D; Vernette, Georges

2004-01-01

Shoreline retreat has been the net dominant historical trend along the 145 km-length littoral between Arboletes and Turbo (southern Caribbean of Colombia). For the last four decades, there were identified in this littoral shoreline retreat of about 50-100 m in several places (Uveros, Damaquiel, Zapata, Turbo) and a maximum of 1.6 km in the Punta Rey-Arboletes area, where land losses were of 4.5 km 2 , at exceptional rates of 40 rn/year. The synthesis of the available information suggest that the general susceptibility to erosion between Arboletes and turbo could be related primarily to relative sea level rise, associated to tectonic movements as well as to the effects of mud diapirism and hydroisostacy. In the more critical areas (Arboletes, Turbo), the natural erosive trends were accelerated by anthropic actions, including river diversion (Turbo), beach mining and inadequate (or total absence) practices for controlling residual and natural waters. Up to august 2000, there were invested about $ Col 10.000 billions in 155 engineering defenses (groins, sea walls and rip-rap which totalize 6.2 km of total length and a volume of materials of 37.000 m 3 ). With few exceptions, groins have not been successful and are now part of the problem, accelerating shore erosion along the adjacent sectors. In the short term, the littoral erosion between Arboletes and turbo is caused both by marine and by sub aerial factors. it is facilitated by the poor lithological strengths of cliffs and marine terraces, mainly composed of highly fractured and weathered claystones and mudstones (with stratification and weakness planes dipping toward sea) and non-consolidated, easily liquefacted, fine sediments; both conditions facilitate the occurrence of rocks falls, slides and mud flows that result in high figures of cliff retreat (3 to 4 m), specially during the first 15 days of the summer-winter transition (April) and in high waves periods. The case of the littoral erosion between Arboletes

Electric Turbo Pump

Science.gov (United States)

Steckler, Jessica

2017-01-01

NASA is working in junction with another company on the Electric Turbo Pump. Analysis of the impeller, including the blades, volute housing, and associated components, will take place in ANSYS. Contours of the deformed and stress were recorded to assess the parts. Campbell diagrams will be considered as mentioned to find the operating regions of the impeller and volute housing, more specifically what speed is ideal to ensure that the impeller does not begin to vibrate at a frequency that will break it. More than one material will be examined as per request by the designer to determine which material is more cost efficient, easy to machine, and can withstand the stress values that will be placed on it.

ABB Turbo advanced fuel for application in System 80 family of plants

International Nuclear Information System (INIS)

Karoutas, Z.E.; Dixon, D.J.; Shapiro, N.L.

1998-01-01

ABB Combustion Engineering Nuclear Operations (ABB CE) has developed an Advanced Fuel Design, tailored to the Combustion Engineering, Inc. (CE) Nuclear Steam Supply System (NSSS) environment. This Advanced Fuel Design called Turbo features a full complement of innovative components, including GUARDIAN debris-resistant spacer grids, Turbo Zircaloy mixing grids to increase thermal margin and grid-to-rod fretting resistance, value-added fuel pellets to increase fuel loading, advanced cladding to increase achievable burnup, and axial blankets and Erbium integral burnable absorbers for improving fuel cycle economics. This paper summarizes the Turbo Fuel Design and its application to a System 80 family type plant. Benefits in fuel reliability, thermal margin, improved fuel cycle economics and burn up capability are compared relative to the current ABB CE standard fuel design. The fuel management design and the associated thermal margin are also evaluated. (author)

Shared visions: Partnership of Rockwell International and NASA Cost Effectiveness Enhancements (CEE) for the space shuttle system integration program

Science.gov (United States)

Bejmuk, Bohdan I.; Williams, Larry

As a result of limited resources and tight fiscal constraints over the past several years, the defense and aerospace industries have experienced a downturn in business activity. The impact of fewer contracts being awarded has placed a greater emphasis for effectiveness and efficiency on industry contractors. It is clear that a reallocation of resources is required for America to continue to lead the world in space and technology. The key to technological and economic survival is the transforming of existing programs, such as the Space Shuttle Program, into more cost efficient programs so as to divert the savings to other NASA programs. The partnership between Rockwell International and NASA and their joint improvement efforts that resulted in significant streamlining and cost reduction measures to Rockwell International Space System Division's work on the Space Shuttle System Integration Contract is described. This work was a result of an established Cost Effectiveness Enhancement (CEE) Team formed initially in Fiscal Year 1991, and more recently expanded to a larger scale CEE Initiative in 1992. By working closely with the customer in agreeing to contract content, obtaining management endorsement and commitment, and involving the employees in total quality management (TQM) and continuous improvement 'teams,' the initial annual cost reduction target was exceeded significantly. The CEE Initiative helped reduce the cost of the Shuttle Systems Integration contract while establishing a stronger program based upon customer needs, teamwork, quality enhancements, and cost effectiveness. This was accomplished by systematically analyzing, challenging, and changing the established processes, practices, and systems. This examination, in nature, was work intensive due to the depth and breadth of the activity. The CEE Initiative has provided opportunities to make a difference in the way Rockwell and NASA work together - to update the methods and processes of the organizations

Shared visions: Partnership of Rockwell International and NASA Cost Effectiveness Enhancements (CEE) for the space shuttle system integration program

Science.gov (United States)

Bejmuk, Bohdan I.; Williams, Larry

1992-01-01

As a result of limited resources and tight fiscal constraints over the past several years, the defense and aerospace industries have experienced a downturn in business activity. The impact of fewer contracts being awarded has placed a greater emphasis for effectiveness and efficiency on industry contractors. It is clear that a reallocation of resources is required for America to continue to lead the world in space and technology. The key to technological and economic survival is the transforming of existing programs, such as the Space Shuttle Program, into more cost efficient programs so as to divert the savings to other NASA programs. The partnership between Rockwell International and NASA and their joint improvement efforts that resulted in significant streamlining and cost reduction measures to Rockwell International Space System Division's work on the Space Shuttle System Integration Contract is described. This work was a result of an established Cost Effectiveness Enhancement (CEE) Team formed initially in Fiscal Year 1991, and more recently expanded to a larger scale CEE Initiative in 1992. By working closely with the customer in agreeing to contract content, obtaining management endorsement and commitment, and involving the employees in total quality management (TQM) and continuous improvement 'teams,' the initial annual cost reduction target was exceeded significantly. The CEE Initiative helped reduce the cost of the Shuttle Systems Integration contract while establishing a stronger program based upon customer needs, teamwork, quality enhancements, and cost effectiveness. This was accomplished by systematically analyzing, challenging, and changing the established processes, practices, and systems. This examination, in nature, was work intensive due to the depth and breadth of the activity. The CEE Initiative has provided opportunities to make a difference in the way Rockwell and NASA work together - to update the methods and processes of the organizations

Rockwell International - Rocky Flats Plant: Occupational Health Information System

International Nuclear Information System (INIS)

Bistine, R.W.; Petrocchi, A.; Wright, W.L.; Yoder, R.E.; Fischer, C.M.

1984-01-01

The Rockwell International-Rocky Flats Occupational Health Information System uses the FLOW GEMINI software on a VAX computer system. The system is extremely user friendly, flexible, comprehensive, and easily customized by the user. The system contains the editioned files (i.e., time organized historical data) of the Medical, Industrial Hygiene, Health Physics, and Safety Departments. It maintains, analyzes and reports on data from employee medical and work histories, medical exams, workplace monitoring, and health effects related to specific hazards or locations in the workplace. It identifies and reports potential individual and group problems through regular reports and responses to on-line queries. In addition, it schedules examination, sampling, produces standard user-defined reports, and provides statistical analysis capabilities. The system presently contains a file of more than 20,000 Material Data Safety Sheets. A user group provides a mechanism for sharing ideas and continual software enhancement. 11 figures

List manipulation in Turbo Prolog

Directory of Open Access Journals (Sweden)

V.Cotelea

1995-06-01

Full Text Available The present paper is concerned with list processing in Turbo Prolog language. It doesn't claim to be an exhaustive description of operations which can be performed upon lists. Nevertheless adduced programs are most representative, more or less known to specialists in logic programming domain. By means of examples are explained the list manipulation techniques, use of recursion, declarative comparison of predicates, analysis and fixation of acceptable prototypes and some problems of predicates' inconsistency. Index terms. Prolog, list, recursion.

Study of two-stage turbine characteristic and its influence on turbo-compound engine performance

International Nuclear Information System (INIS)

Zhao, Rongchao; Zhuge, Weilin; Zhang, Yangjun; Yang, Mingyang; Martinez-Botas, Ricardo; Yin, Yong

2015-01-01

Highlights: • An analytical model was built to study the interactions between two turbines in series. • The impacts of HP VGT and LP VGT on turbo-compound engine performance were investigated. • The fuel reductions obtained by HP VGT at 1900 rpm and 1000 rpm are 3.08% and 7.83% respectively. • The optimum value of AR ranged from 2.0 to 2.5 as the turbo-compound engine speed decreases. - Abstract: Turbo-compounding is an effective way to recover waste heat from engine exhaust and reduce fuel consumption for internal combustion engine (ICE). The characteristics of two-stage turbine, including turbocharger turbine and power turbine, have significant effects on the overall performance of turbo-compound engine. This paper investigates the interaction between two turbines in a turbo-compound engine and its impact on the engine performance. Firstly an analytical model is built to investigate the effects of turbine equivalent flow area on the two-stage turbine characteristics, including swallowing capacity and load split. Next both simulation and experimental method are carried out to study the effects of high pressure variable geometry turbine (HP VGT), low pressure variable geometry turbine (LP VGT) and combined VGT on the engine overall performance. The results show that the engine performance is more sensitive to HP VGT compared with LP VGT at all the operation conditions, which is caused by the larger influences of HP VGT on the total expansion ratio and engine air–fuel ratio. Using the HP VGT method, the fuel reductions of the turbo-compound engine at 1900 rpm and 1000 rpm are 3.08% and 7.83% respectively, in comparison with the baseline engine. The corresponding optimum values of AR are 2.0 and 2.5

Super-Orthogonal Space-Time Turbo Transmit Diversity for CDMA

Directory of Open Access Journals (Sweden)

Pieter G. W. van Rooyen

2005-05-01

Full Text Available Studies have shown that transmit and receive diversity employing a combination of multiple transmit-receive antennas (given ideal channel state information (CSI and independent fading between antenna pairs will potentially yield maximum achievable system capacity. In this paper, the concept of a layered super-orthogonal turbo transmit diversity (SOTTD for downlink direct-sequence code-division multiple-access (CDMA systems is explored. This open-loop transmit diversity technique improves the downlink performance by using a small number of antenna elements at the base station and a single antenna at the handset. In the proposed technique, low-rate super-orthogonal code-spread CDMA is married with code-division transmit diversity (CDTD. At the mobile receiver, space-time (ST RAKE CDTD processing is combined with iterative turbo code-spread decoding to yield large ST gains. The performance of the SOTTD system is compared with single- and multiantenna turbo-coded (TC CDTD systems evaluated over a frequency-selective Rayleigh fading channel. The evaluation is done both by means of analysis and computer simulations. The performance results illustrate the superior performance of SOTTD compared to TC CDTD systems over practically the complete useful capacity range of CDMA. It is shown that the performance degradation characteristic of TC CDTD at low system loads (due to the inherent TC error floor is alleviated by the SOTTD system.

The experimental study on efficiency improvement of turbo machinery supported with magnetic bearings

International Nuclear Information System (INIS)

Park, In Hwang; Park, Young Ho; Han, Dong Chul

2007-01-01

To implement a conventional electromagnetic bearing in small turbo machinery, it has problems such as load capacity and size. Therefore, in this paper, these problems are resolved by using a permanent magnet biased electromagnetic bearing as a thrust bearing of small turbo machinery. Because the flux path of the bearing is designed by reluctance path modulation using an electromagnet and a permanent magnet, the bearing improves upon non-linearity, power consumption, size and load capacity of a conventional electromagnetic bearing. Test rotating the shaft over 500,000DN were carried out to verify the performance of the proposed small turbo machinery. In addition, the relationships between mass flow rate and pressure rise were measured as changing the tip clearance to verify the feasibility of efficiency improvement and active surge control and these results were compared with theoretical results

Performance of an Error Control System with Turbo Codes in Powerline Communications

Directory of Open Access Journals (Sweden)

Balbuena-Campuzano Carlos Alberto

2014-07-01

Full Text Available This paper reports the performance of turbo codes as an error control technique in PLC (Powerline Communications data transmissions. For this system, computer simulations are used for modeling data networks based on the model classified in technical literature as indoor, and uses OFDM (Orthogonal Frequency Division Multiplexing as a modulation technique. Taking into account the channel, modulation and turbo codes, we propose a methodology to minimize the bit error rate (BER, as a function of the average received signal noise ratio (SNR.

Thermodynamic Analysis on of Skid-Mounted Coal-bed Methane Liquefaction Device using Cryogenic Turbo-Expander

Science.gov (United States)

Chen, Shuangtao; Niu, Lu; Zeng, Qiang; Li, Xiaojiang; Lou, Fang; Chen, Liang; Hou, Yu

2017-12-01

Coal-bed methane (CBM) reserves are rich in Sinkiang of China, and liquefaction is a critical step for the CBM exploration and utilization. Different from other CBM gas fields in China, CBM distribution in Sinkiang is widespread but scattered, and the pressure, flow-rate and nitrogen content of CBM feed vary significantly. The skid-mounted liquefaction device is suggested as an efficient and economical way to recover methane. Turbo-expander is one of the most important parts which generates the cooling capacity for the cryogenic liquefaction system. Using turbo-expander, more cooling capacity and higher liquefied fraction can be achieved. In this study, skid-mounted CBM liquefaction processes based on Claude cycle are established. Cryogenic turbo-expander with high expansion ratio is employed to improve the efficiency of CBM liquefaction process. The unit power consumption per liquefaction mole flow-rate for CBM feed gas is used as the object function for process optimization, compressor discharge pressure, flow ratio of feed gas to turbo-expander and nitrogen friction are analyzed, and optimum operation range of the liquefaction processes are obtained.

The Case for Distributed Engine Control in Turbo-Shaft Engine Systems

Science.gov (United States)

Culley, Dennis E.; Paluszewski, Paul J.; Storey, William; Smith, Bert J.

2009-01-01

The turbo-shaft engine is an important propulsion system used to power vehicles on land, sea, and in the air. As the power plant for many high performance helicopters, the characteristics of the engine and control are critical to proper vehicle operation as well as being the main determinant to overall vehicle performance. When applied to vertical flight, important distinctions exist in the turbo-shaft engine control system due to the high degree of dynamic coupling between the engine and airframe and the affect on vehicle handling characteristics. In this study, the impact of engine control system architecture is explored relative to engine performance, weight, reliability, safety, and overall cost. Comparison of the impact of architecture on these metrics is investigated as the control system is modified from a legacy centralized structure to a more distributed configuration. A composite strawman system which is typical of turbo-shaft engines in the 1000 to 2000 hp class is described and used for comparison. The overall benefits of these changes to control system architecture are assessed. The availability of supporting technologies to achieve this evolution is also discussed.

Design of Radial Turbo-Expanders for Small Organic Rankine Cycle System

Science.gov (United States)

Arifin, M.; Pasek, A. D.

2015-09-01

This paper discusses the design of radial turbo-expanders for ORC systems. Firstly, the rotor blades were design and the geometry and the perfromance were calculated using several working fluid such as R134a, R143a, R245fa, n-Pentane, and R123. Then, a numerical study was carried out in the fluid flow area with R134a and R123 as the working fluid. Analyses were performed using Computational Fluid Dynamics (CFD) ANSYS CFX on two real gas models, with the k-epsilon and SST (shear stress transport) turbulence models. The results analysis shows the distribution of Mach number, pressure, velocity and temperature along the rotor blade of the radial turbo-expanders and estimation of performance at various operating conditions. CFD analysis show that if the flow area divided into 250,000 grid mesh, and using real gas model SST at steady state condition, 0.4 kg/s of mass flow rate, 15,000 rpm rotor speed, 5 bar inlet pressure, and 373K inlet temperature, the turbo expander produces 6.7 kW, and 5.5 kW of power when using R134a and R123 respectively.

Portraits in Praise of a People: A Rhetorical Analysis of Norman Rockwell's Icons in Franklin D. Roosevelt's "Four Freedoms" Campaign.

Science.gov (United States)

Olson, Lester C.

1983-01-01

Examines Rockwell's "Four Freedoms" posters and considers the historical circumstances during which they were mass-distributed. Observes how these paintings that praised the political and religious values of Americans were used to educate the people about the necessity of participation in World War II. (PD)

Turbo-extraction of glycosides from Stevia rebaudiana using a fractional factorial design

Directory of Open Access Journals (Sweden)

Paula M. Martins

Full Text Available ABSTRACT Stevia rebaudiana (Bertoni Bertoni, Asteraceae, leaf extract has recently called the attention of food industry as a proposal for natural sweetener. The sweet flavor is attributed to the glycosides, in especial stevioside and rebaudioside A, which are the plant main chemical markers. The aim of the work reported here was to optimize the turbo-extraction of stevia leaves using water, ethanol 70% and 90% (w/w as green solvents. A 25-2 factorial design was applied to study the linear effects of the drug size, solvent to drug ratio, temperature, time and also the turbolysis speed on the extraction of glycosides. The glycosides exhaustive extraction showed that ethanol 70% gave better results and was used for turbo-extraction. The stevioside and rebaudioside A contents were quantified by a validated method by high performance liquid chromatographic with photodiode array detector. The contents of stevioside and rebaudioside A in fluid extract increased with the drug size, but decreased at high shearing speeds and solvent to drug ratio, while their yields decreased at higher temperature and were not affected by turbo speed. An increase in solvent to drug ratio reduced significantly the glycosides percent in dried extract. Optimal solution for S. rebaudiana leaves turbo-extraction was determined by desirability functions. The optimal extraction condition corresponded to drug size of 780 µm, solvent to drug ratio of 10, extraction time of 18 min; temperature of 23 ºC and turbo speed of 20,000 rpm, resulting in yields of 4.98% and 2.70%, for stevioside and rebaudioside A, respectively. These yields are comparable to the ones recently published for dynamic maceration, but with the advantage of shorter extraction times. This work demonstrates that turbolysis is promising for S. rebaudiana glycosides extraction and stimulate new research on the purification of these extracts, which may become an interesting source of income for developing

Functional evaluation of transplanted kidneys by Gd-DTPA enhanced turbo FLASH MR imaging

International Nuclear Information System (INIS)

Nakashima, Rumi; Yamashita, Yasuyuki; Tomiguchi, Seiji; Tsuji, Akinori; Takahashi, Mutsumasa

1996-01-01

We evaluated the usefulness of dynamic turbo FLASH MR imaging in the differential diagnosis of complications after renal transplantation in 17 patients (10 from living relatives and 7 from cadavers). Coronal turbo FLASH dynamic images were obtained every 5 sec for 5 min after an intravenous bolus injection of Gd-DTPA. Corticomedullary differentiation (CMD) on spin echo coronal T 1 -weighted images and MR renogram patterns of the renal cortex and medulla were obtained for quantitative analysis of the Gd-DTPA-enhanced dynamic turbo-FLASH images. The signal intensity ratio of the medulla to cortex after Gd-DTPA enhancement was compared among four groups: normal (n=9), acute tubular necrosis (ATN) or cyclosporine A (CyA) tubulopathy (n=6), acute rejection (AR) in the living related donor kidney (n=4), and AR in the cadaveric kidney (n=5). Although loss of CMD was seen in severe renal dysfunction in the transplanted kidneys, there was considerable overlap among the four groups. On dynamic study, there was significant differences in the signal intensity ratio of the medulla to cortex between normally functioning kidneys or ATN/CyA tubulopathy and AR (p<0.01). In patients with severe renal dysfunction, the arterial cortical peak was indistinct. In conclusion, MR renograms obtained from dynamic turbo FLASH MR imaging played a significant role in evaluating dysfunction of the renal transplant. (author)

Design of deterministic interleaver for turbo codes

International Nuclear Information System (INIS)

Arif, M.A.; Sheikh, N.M.; Sheikh, A.U.H.

2008-01-01

The choice of suitable interleaver for turbo codes can improve the performance considerably. For long block lengths, random interleavers perform well, but for some applications it is desirable to keep the block length shorter to avoid latency. For such applications deterministic interleavers perform better. The performance and design of a deterministic interleaver for short frame turbo codes is considered in this paper. The main characteristic of this class of deterministic interleaver is that their algebraic design selects the best permutation generator such that the points in smaller subsets of the interleaved output are uniformly spread over the entire range of the information data frame. It is observed that the interleaver designed in this manner improves the minimum distance or reduces the multiplicity of first few spectral lines of minimum distance spectrum. Finally we introduce a circular shift in the permutation function to reduce the correlation between the parity bits corresponding to the original and interleaved data frames to improve the decoding capability of MAP (Maximum A Posteriori) probability decoder. Our solution to design a deterministic interleaver outperforms the semi-random interleavers and the deterministic interleavers reported in the literature. (author)

Aeroderivative Gas Turbo engine in CHP Plant. Compatibility Problems

Directory of Open Access Journals (Sweden)

Sorinel-Gicu TALIF

2010-12-01

Full Text Available The paper presents the possibilities to develop Combined Cycle Units based onaeroderivative Gas Turbo engines and on existing Steam Turbines. The specific compatibilityproblems of these components and the thermodynamic performances of the analyzed Combined CycleUnits are also presented.

Fault diagnostics for turbo-shaft engine sensors based on a simplified on-board model.

Science.gov (United States)

Lu, Feng; Huang, Jinquan; Xing, Yaodong

2012-01-01

Combining a simplified on-board turbo-shaft model with sensor fault diagnostic logic, a model-based sensor fault diagnosis method is proposed. The existing fault diagnosis method for turbo-shaft engine key sensors is mainly based on a double redundancies technique, and this can't be satisfied in some occasions as lack of judgment. The simplified on-board model provides the analytical third channel against which the dual channel measurements are compared, while the hardware redundancy will increase the structure complexity and weight. The simplified turbo-shaft model contains the gas generator model and the power turbine model with loads, this is built up via dynamic parameters method. Sensor fault detection, diagnosis (FDD) logic is designed, and two types of sensor failures, such as the step faults and the drift faults, are simulated. When the discrepancy among the triplex channels exceeds a tolerance level, the fault diagnosis logic determines the cause of the difference. Through this approach, the sensor fault diagnosis system achieves the objectives of anomaly detection, sensor fault diagnosis and redundancy recovery. Finally, experiments on this method are carried out on a turbo-shaft engine, and two types of faults under different channel combinations are presented. The experimental results show that the proposed method for sensor fault diagnostics is efficient.

Fault Diagnostics for Turbo-Shaft Engine Sensors Based on a Simplified On-Board Model

Directory of Open Access Journals (Sweden)

Yaodong Xing

2012-08-01

Full Text Available Combining a simplified on-board turbo-shaft model with sensor fault diagnostic logic, a model-based sensor fault diagnosis method is proposed. The existing fault diagnosis method for turbo-shaft engine key sensors is mainly based on a double redundancies technique, and this can’t be satisfied in some occasions as lack of judgment. The simplified on-board model provides the analytical third channel against which the dual channel measurements are compared, while the hardware redundancy will increase the structure complexity and weight. The simplified turbo-shaft model contains the gas generator model and the power turbine model with loads, this is built up via dynamic parameters method. Sensor fault detection, diagnosis (FDD logic is designed, and two types of sensor failures, such as the step faults and the drift faults, are simulated. When the discrepancy among the triplex channels exceeds a tolerance level, the fault diagnosis logic determines the cause of the difference. Through this approach, the sensor fault diagnosis system achieves the objectives of anomaly detection, sensor fault diagnosis and redundancy recovery. Finally, experiments on this method are carried out on a turbo-shaft engine, and two types of faults under different channel combinations are presented. The experimental results show that the proposed method for sensor fault diagnostics is efficient.

VLSI Architectures for Sliding-Window-Based Space-Time Turbo Trellis Code Decoders

Directory of Open Access Journals (Sweden)

Georgios Passas

2012-01-01

Full Text Available The VLSI implementation of SISO-MAP decoders used for traditional iterative turbo coding has been investigated in the literature. In this paper, a complete architectural model of a space-time turbo code receiver that includes elementary decoders is presented. These architectures are based on newly proposed building blocks such as a recursive add-compare-select-offset (ACSO unit, A-, B-, Γ-, and LLR output calculation modules. Measurements of complexity and decoding delay of several sliding-window-technique-based MAP decoder architectures and a proposed parameter set lead to defining equations and comparison between those architectures.

A sealed turbo-alternator using any working-fluid

International Nuclear Information System (INIS)

Chollet, Maurice.

1973-01-01

The invention relates to a sealed turbo-alternator operating with a working fluid other than water. The turbo-alternator and the feed and lubricating pumps thereof are housed in a sealed casing. The latter constitutes, with the heat pump and the heat sink, a sealed enclosure containing the working and lubricating fluid. The alternator, which comprises neither collector nor brushes, is dipped in the working fluid vapor. Electric energy leaves the sealed enclosure through insulating sealed passager. In view of the absence of leakage it is possible to select (e.g. among freons) a working fluid well suited to the temperature differential between the heat source and the heat sink, and, accordingly to use temperature drops which could be too small in the case of steam. The various applications are as follows: recovery of calories at the exhaust of diesels and of gas turbines or in the cooling water of diesels; equipment of isotopic generators; recovery of calories from factory waste thrown into rivers (anti-pollution effect in view of the lowering of water temperature); non-polluting engine for special electrical vehicles [fr

The reproductive cycle of the intertidal gastropod Turbo coronatus ...

African Journals Online (AJOL)

Histological methods were used to determine the reproductive cycle of Turbo coronatus. Ovarian development was assessed from the relative proportions of mature and immature oocytes in sectioned material. Testicular tissues ware subjectively given a maturity index based on the relative proportions of the various ...

Ultrashort turbo spinecho versus turbo spinecho in the evaluation of musculoskeletal diseases

International Nuclear Information System (INIS)

Breitenseher, M.; Kontaxis, G.; Fleischmann, D.; Rand, T.H.; Imhof, H.; Trattnig, S.

1995-01-01

Ultrashort turbo spin-echo sequence (TSE) has the advantage of shorter scan times, minimizing motion artifacts, but has the disadvantage of a lower signal-to-noise ratio and suffers from different artifacts. T2-weighted ultrashort TSE (echo train 24) and TSE (echo train 11) were compared in degenerative lesions of the spine (n=9) and ligamentous lesions associated with sprained ankle injuries (n=5). The imaging quality of ultrashort TSE was very similar to TSE. There was no difference in diagnostic reliability with ultrashort TSE compared to TSE in the spine or ankle. With regard to contrast properties a higher signal intensity of fatty bone marrow was obtained with ultrashort TSE, with consecutive lower contrast between fluid and edema on the one hand and fatty tissue on the other. (orig.) [de

System Performance of Concatenated STBC and Block Turbo Codes in Dispersive Fading Channels

Directory of Open Access Journals (Sweden)

Kam Tai Chan

2005-05-01

Full Text Available A new scheme of concatenating the block turbo code (BTC with the space-time block code (STBC for an OFDM system in dispersive fading channels is investigated in this paper. The good error correcting capability of BTC and the large diversity gain characteristics of STBC can be achieved simultaneously. The resulting receiver outperforms the iterative convolutional Turbo receiver with maximum- a-posteriori-probability expectation maximization (MAP-EM algorithm. Because of its ability to perform the encoding and decoding processes in parallel, the proposed system is easy to implement in real time.

Evaluation of endometrial carcinoma by multislice dynamic MR imaging with Turbo FLASH

Energy Technology Data Exchange (ETDEWEB)

Asakawa, Mari [Okayama Univ. (Japan). School of Medicine

1995-04-01

The purpose of this study was to investigate the usefulness of multislice dynamic MR imaging with Turbo FLASH in assessing myometrial invasion by endometrial carcinoma. Dynamic MR imaging was performed with bolus injection of Gd-DTPA and with 1.5-T Siemens Magnetom imager using Turbo FLASH. Thirty-six endometrial carcinomas were evaluated with pathologic correlation. Junctional zone showed more rapid contrast enhancement effects than myometrium even after menopause. Contrast to noise ratio between junctional zone and endometrial carcinoma was the highest about fifty seconds after bolus injection. Only at that time could the degree of invasion to junctional zone in post-menopausal women whose junctional zones could not be seen on T{sub 2}-weighted images or contrast-enhanced T{sub 1}-weighted images be evaluated correctly. The accuracy in assessing myometrial invasion with T{sub 2}-weighted images, postcontrast T{sub 1}-weighted images, and dynamic MR imaging was 75%, 81% and 89% respectively. Though there was no statistically significant difference, multislice dynamic imaging with Turbo FLASH technique is considered to be a useful imaging method for the pre-operative assessment of myometrial invasion by endometrial carcinoma. (author).

Torsional vibration analysis in turbo-generator shaft due to mal-synchronization fault

Science.gov (United States)

Bangunde, Abhishek; Kumar, Tarun; Kumar, Rajeev; Jain, S. C.

2018-03-01

A rotor of turbo-generator shafting is many times subjected to torsional vibrations during its lifespan. The reasons behind these vibrations are three-Phase fault, two-phase fault, line to ground fault, faulty-mal synchronization etc. Sometimes these vibrations can cause complete failure of turbo-generator shafting system. To calculate moment variation during these faults on the shafting system vibration analysis is done using Finite Elements Methods to calculate mass and stiffness matrix. The electrical disturbance caused during Mal-synchronization is put on generator section, and corresponding second order equations are solved by using “Duhamel Integral”. From the moment variation plots at four sections critically loaded sections are identified.

Turbo-Gallager Codes: The Emergence of an Intelligent Coding ...

African Journals Online (AJOL)

Today, both turbo codes and low-density parity-check codes are largely superior to other code families and are being used in an increasing number of modern communication systems including 3G standards, satellite and deep space communications. However, the two codes have certain distinctive characteristics that ...

Thermal characteristics of high-temperature R718 heat pumps with turbo compressor thermal vapor recompression

International Nuclear Information System (INIS)

Šarevski, Milan N.; Šarevski, Vasko N.

2017-01-01

Highlights: • High pressure ratio, high speed, transonic R718 centrifugal compressors. • High efficient industrial evaporators/concentrators with turbo thermal vapor recompression. • Utilization of waste heat from industrial thermal and processing systems. • R718 is an ideal refrigerant for the novel high-temperature industrial heat pumps. • Application of single-stage R718 centrifugal compressors. - Abstract: Characteristics of R718 centrifugal compressors are analyzed and range of their applications in industrial high-temperature heat pumps, district heating systems and geothermal green house heating systems are estimated. Implementation of turbo compressor thermal vapor recompression in industrial evaporating/concentrating plants for waste heat utilization results in a high energy efficiency and in other technical, economical and environmental benefits. A novel concept of turbo compression R718 heat pumps is proposed and an assessment of their thermal characteristics is presented for utilization of waste heat from industrial thermal plants and systems (boilers, furnaces, various technological and metallurgical cooling processes, etc.), and for applications in district heating and geothermal green house heating systems. R718 is an ideal refrigerant for the novel high-temperature turbo compression industrial heat pumps. Direct evaporation and condensation are advantages of the proposed system which lead to higher COP, and to simplification of the plant and lower cost.

Turbo Equalization Using Partial Gaussian Approximation

DEFF Research Database (Denmark)

Zhang, Chuanzong; Wang, Zhongyong; Manchón, Carles Navarro

2016-01-01

This letter deals with turbo equalization for coded data transmission over intersymbol interference (ISI) channels. We propose a message-passing algorithm that uses the expectation propagation rule to convert messages passed from the demodulator and decoder to the equalizer and computes messages...... returned by the equalizer by using a partial Gaussian approximation (PGA). We exploit the specific structure of the ISI channel model to compute the latter messages from the beliefs obtained using a Kalman smoother/equalizer. Doing so leads to a significant complexity reduction compared to the initial PGA...

The matching of characteristics of the turbo-supercharging system and two-stroke transport diesel engine

OpenAIRE

Алёхин, Сергей Алексеевич; Герасименко, Владимир Петрович; Опалев, Василий Анатольевич

2013-01-01

The basic problems of the matching of characteristics of turbo-supercharging units and two-stroke transport diesel engines with various number of cylinders are considered. Influence of the number of impeller tiers and other geometrical parameters on the pressure characteristic of the centrifugal compressor and joint action of the compressor and the piston engine is investigated. Effective measures on the optimum coordination of a mechanical turbo-supercharging with a transport diesel engin...

US command improvements and command vulnerability

International Nuclear Information System (INIS)

Ball, D.; Bethe, H.A.; Blair, B.G.; Bracken, P.; Carter, A.B.; Dickinson, H.; Garwin, R.L.; Holloway, D.; Kendall, H.W.

1988-01-01

In essence, the United States still relies on the strategic command system erected during the 1960s and 1970s, but as we have seen, this system suffers from a number of serious weaknesses. Among these the authors emphasized the vulnerability of vital communications even before any warheads impact directly on U.S. targets, as well as the systems; heavy reliance on a relatively small number of limited-endurance aircraft as command posts and radio relays. This paper focuses on the committed improvement program, assess its impact on command vulnerability, and offer suggestions for further command improvements designed to enhance crisis stability and to facilitate ware termination should deterrence fail. The reader should note that this chapter is rather more technical than the remainder of this book

Research on Development of Turbo-generator with Partial Admission Nozzle for Supercritical CO{sub 2} Power Generation

Energy Technology Data Exchange (ETDEWEB)

Cho, Junhyun; Shin, Hyung-ki; Lee, Gilbong; Baik, Young-Jin [Korea Institute of Energy Research (KIER), Daejeon (Korea, Republic of); Kang, Young-Seok [Korea Aerospace Research Institute (KARI), Daejeon (Korea, Republic of); Kim, Byunghui [InGineers Ltd., Seoul (Korea, Republic of)

2017-04-15

A Sub-kWe small-scale experimental test loop was manufactured to investigate characteristics of the supercritical carbon dioxide power cycle. A high-speed turbo-generator was also designed and manufactured. The designed rotational speed of this turbo-generator was 200,000 rpm. Because of the low expansion ratio through the turbine and low mass flowrate, the rotational speed of the turbo-generator was high. Therefore, it was difficult to select the rotating parts and design the turbine wheel, axial force balance and rotor dynamics in the lab-scale experimental test loop. Using only one channel of the nozzle, the partial admission method was adapted to reduce the rotational speed of the rotor. This was the world’s first approach to the supercritical carbon dioxide turbo-generator. A cold-run test using nitrogen gas under an atmospheric condition was conducted to observe the effect of the partial admission nozzle on the rotor dynamics. The vibration level of the rotor was obtained using a gap sensor, and the results showed that the effect of the partial admission nozzle on the rotor dynamics was allowable.

Condition monitoring of steam turbo generators of captive power plant at HWP (Manuguru) through vibration analysis

International Nuclear Information System (INIS)

Krishnareddy, G.; Chandramouli, M.; Gupta, R.V.

2002-01-01

Turbo Generator is a critical equipment in steam based power plant circuit. Any failure causes loss of production and hence as applicable to Heavy Water Plant, Manuguru, it results in loss of heavy water production as the captive power plant at Manuguru is solely designed to supply steam and power to Main Plant, which is meant for production of heavy water. Thereby condition monitoring is very much essential and required as part of predictive maintenance program for the turbo generators which are in continuous operation. This paper focuses on identification of the turbo generator system through vibration spectrum, characterising and differentiating the fault mechanisms, trending the faults through changes in vibration spectrums and orbit plots and subsequently planning for corrective actions/measures after evaluating the changes in machine conditions

Dynamic configuration management of a multi-standard and multi-mode reconfigurable multi-ASIP architecture for turbo decoding

Science.gov (United States)

Lapotre, Vianney; Gogniat, Guy; Baghdadi, Amer; Diguet, Jean-Philippe

2017-12-01

The multiplication of connected devices goes along with a large variety of applications and traffic types needing diverse requirements. Accompanying this connectivity evolution, the last years have seen considerable evolutions of wireless communication standards in the domain of mobile telephone networks, local/wide wireless area networks, and Digital Video Broadcasting (DVB). In this context, intensive research has been conducted to provide flexible turbo decoder targeting high throughput, multi-mode, multi-standard, and power consumption efficiency. However, flexible turbo decoder implementations have not often considered dynamic reconfiguration issues in this context that requires high speed configuration switching. Starting from this assessment, this paper proposes the first solution that allows frame-by-frame run-time configuration management of a multi-processor turbo decoder without compromising the decoding performances.

32 CFR 724.406 - Commander, Naval Medical Command.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Commander, Naval Medical Command. 724.406 Section 724.406 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL NAVAL DISCHARGE REVIEW BOARD Principal Elements of the Navy Department Discharge Review System § 724.406 Commander...

Performance Evaluation of HARQ Technique with UMTS Turbo Code

Directory of Open Access Journals (Sweden)

S. S. Brkić

2011-11-01

Full Text Available The hybrid automatic repeat request technique (HARQ represents the error control principle which combines an error correcting code and automatic repeat request procedure (ARQ, within the same transmission system. In this paper, using Monte Carlo simulation process, the characteristics of HARQ technique are determined, for the case of the Universal Mobile Telecommunication System (UMTS turbo code.

MR colonography with fecal tagging: comparison between 2D turbo FLASH and 3D FLASH sequences

International Nuclear Information System (INIS)

Papanikolaou, Nickolas; Grammatikakis, John; Maris, Thomas; Prassopoulos, Panos; Gourtsoyiannis, Nicholas; Lauenstein, Thomas

2003-01-01

The objective of this study was to compare inversion recovery turbo 2D fast low-angle shot (FLASH) and 3D FLASH sequences for fecal-tagged MR colonography studies. Fifteen consecutive patients with indications for colonoscopy underwent MR colonography with fecal tagging. An inversion recovery turbo-FLASH sequence was applied and compared in terms of artifacts presence, efficiency for masking residual stool, and colonic wall conspicuity with a fat-saturated 3D FLASH sequence. Both sequences were acquired following administration of paramagnetic contrast agent. Contrast-to-noise ratio and relative contrast between colonic wall and lumen were calculated and compared for both sequences. Turbo 2D FLASH provided fewer artifacts, higher efficiency for masking the residual stool, and colonic wall conspicuity equivalent to 3D FLASH. An inversion time of 10 ms provided homogeneously low signal intensity of the colonic lumen. Contrast to noise between colonic wall and lumen was significantly higher in the 3D FLASH images, whereas differences in relative contrast were not statistically significant. An optimized inversion-recovery 2D turbo-FLASH sequence provides better fecal tagging results and should be added to the 3D FLASH sequence when designing dark-lumen MR colonography examination protocols. (orig.)

Experimental Study in a Cascade Row for Improving the Performance of a Partially Admitted Turbo-Expander

Directory of Open Access Journals (Sweden)

Soo-Yong Cho

2015-12-01

Full Text Available Turbo-expanders are widely used as power generators in the field of energy conversion such as organic Rankine cycle (ORC systems. When the available thermal energy is not sufficient to operate the turbo-expander in full admission, it is much better to operate in partial admission instead of stand-down. However, the performance of the turbo-expander greatly depends on the operating conditions. Among many operating conditions, the flow angle at the nozzle and solidity can be major factors affecting the performance of the expander. In order to investigate the optimal operation conditions, experiments were conducted in a linear cascade apparatus simulating the operation of turbo-expander in partial admission. Three different nozzle flow angles of 58°, 65°, and 72° were adopted, and the experiments were conducted with respective solidities of 1.25, 1.38, and 1.67 at each nozzle flow angle. The cross section of the nozzle was rectangular and the chord of the tested blade was 200 mm. The blades moved in a rotational direction, and the forces on the blades were measured with the surface pressure at steady state. The experimental results showed that the rotational force increased for a larger solidity or for a smaller nozzle flow angle.

Design and Implementation of Adaptive Turbo Encoder for Quantized Software Defined Low-Power DVB-RCS Radios

Directory of Open Access Journals (Sweden)

S. H. Elramly

2010-11-01

Full Text Available Turbo codes are employed in every robust wireless digital communications system. Those codes have been adopted for the satellite return channel in DVB-RCS (Return Channel via Satellite standard. In Software Defined Radios (SDRs, Field Programmable Gate Array technology (FPGA is considered a highly configurable option for implementing many sophisticated signal processing tasks. The implementation for such codes is complex and dissipates a large amount of power. This paper studies the efficient implementation of quantized DVB-RCS turbo coding. Also, a low-power, turbo encoder for DVB-RCS is described using a VHDL code. The proposed encoder design is implemented on Xilinx Virtex-II Pro, XC2vpx30 FPGA chip. FPGA Advantage Pro package provided by Mentor Graphics is used for VHDL description and ISE 10.1 by Xilinx is used for synthetization.

Commanders' Survey: School for Command Preparation Feedback

National Research Council Canada - National Science Library

Frame, Adela

1997-01-01

.... All command designees attend the PreCommand Course (PCC). PCC provides common understanding of current doctrine, and up-to-date information on Army-wide policy, programs and special items of interest...

Measurement and control system for cryogenic helium gas bearing turbo-expander experimental platform based on Siemens PLC S7-300

Energy Technology Data Exchange (ETDEWEB)

Li, J.; Xiong, L. Y.; Peng, N.; Dong, B.; Liu, L. Q. [Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190 (China); Wang, P. [Beijing Sciample Technology Co., Ltd., Beijing, 100190 (China)

2014-01-29

An experimental platform for cryogenic Helium gas bearing turbo-expanders is established at the Technical Institute of Physics and Chemistry, Chinese Academy of Sciences. This turbo-expander experimental platform is designed for performance testing and experimental research on Helium turbo-expanders with different sizes from the liquid hydrogen temperature to the room temperature region. A measurement and control system based on Siemens PLC S7-300 for this turbo-expander experimental platform is developed. Proper sensors are selected to measure such parameters as temperature, pressure, rotation speed and air flow rate. All the collected data to be processed are transformed and transmitted to S7-300 CPU. Siemens S7-300 series PLC CPU315-2PN/DP is as master station and two sets of ET200M DP remote expand I/O is as slave station. Profibus-DP field communication is established between master station and slave stations. The upper computer Human Machine Interface (HMI) is compiled using Siemens configuration software WinCC V6.2. The upper computer communicates with PLC by means of industrial Ethernet. Centralized monitoring and distributed control is achieved. Experimental results show that this measurement and control system has fulfilled the test requirement for the turbo-expander experimental platform.

Measurement and control system for cryogenic helium gas bearing turbo-expander experimental platform based on Siemens PLC S7-300

Science.gov (United States)

Li, J.; Xiong, L. Y.; Peng, N.; Dong, B.; Wang, P.; Liu, L. Q.

2014-01-01

An experimental platform for cryogenic Helium gas bearing turbo-expanders is established at the Technical Institute of Physics and Chemistry, Chinese Academy of Sciences. This turbo-expander experimental platform is designed for performance testing and experimental research on Helium turbo-expanders with different sizes from the liquid hydrogen temperature to the room temperature region. A measurement and control system based on Siemens PLC S7-300 for this turbo-expander experimental platform is developed. Proper sensors are selected to measure such parameters as temperature, pressure, rotation speed and air flow rate. All the collected data to be processed are transformed and transmitted to S7-300 CPU. Siemens S7-300 series PLC CPU315-2PN/DP is as master station and two sets of ET200M DP remote expand I/O is as slave station. Profibus-DP field communication is established between master station and slave stations. The upper computer Human Machine Interface (HMI) is compiled using Siemens configuration software WinCC V6.2. The upper computer communicates with PLC by means of industrial Ethernet. Centralized monitoring and distributed control is achieved. Experimental results show that this measurement and control system has fulfilled the test requirement for the turbo-expander experimental platform.

Preprocessor that Enables the Use of GridProTM Grids for Unsteady Reynolds-Averaged Navier-Stokes Code TURBO

Science.gov (United States)

Shyam, Vikram

2010-01-01

A preprocessor for the Computational Fluid Dynamics (CFD) code TURBO has been developed and tested. The preprocessor converts grids produced by GridPro (Program Development Company (PDC)) into a format readable by TURBO and generates the necessary input files associated with the grid. The preprocessor also generates information that enables the user to decide how to allocate the computational load in a multiple block per processor scenario.

The LHCb Turbo stream

CERN Document Server

AUTHOR|(CDS)2070171

2016-01-01

The LHCb experiment will record an unprecedented dataset of beauty and charm hadron decays during Run II of the LHC, set to take place between 2015 and 2018. A key computing challenge is to store and process this data, which limits the maximum output rate of the LHCb trigger. So far, LHCb has written out a few kHz of events containing the full raw sub-detector data, which are passed through a full offline event reconstruction before being considered for physics analysis. Charm physics in particular is limited by trigger output rate constraints. A new streaming strategy includes the possibility to perform the physics analysis with candidates reconstructed in the trigger, thus bypassing the offline reconstruction. In the Turbo stream the trigger will write out a compact summary of physics objects containing all information necessary for analyses. This will allow an increased output rate and thus higher average efficiencies and smaller selection biases. This idea will be commissioned and developed during 2015 wi...

The Effect of Crude Extract of Turbo coronatus from the Persian Gulf on Serum Biochemical Parameters and Hematiological Parameters of Rats

Directory of Open Access Journals (Sweden)

Amir Vazirizadeh

2017-05-01

Full Text Available : Turbotoxins are marine secondary metabolites that produce in Turbinidae family and were isolated from Japanese Turbo marmorata for the first time. A few research has been done on these metabolites so far. Another species, Turbo coronatus exists in Iran. The main aim of the current project was to investigate some biological effects of the crude extract of Turbo coronatus from the Persian Gulf . Materials and methods: In this study, 18 rats were selected in three groups including the control group. The experimental groups received ½ and 1/3 lethal doses intravenously and serum levels of liver and muscle enzymes, electrolytes and complete blood counts (CBC were measured after 24 hours. : The levels of liver and muscle enzymes, amylase, sodium, potassium, calcium, phosphorus, ferrous, haptoglobin, albumin and creatinine were significantly increased in experimental group compared with the control group by injection of crude extract of Turbo coronatus; however, hemoglobin, mean corpuscular volume (MCV, red blood cell count, magnesium, and glucose levels were significantly decreased in the experimental group compared with the control group. : Intravenous injection of ½ and 1/3 lethal doses of the crude extract of Turbo coronatus to rats produced rhabdomyolysis and hepatocytes injury. In addition, the crude extract injection acted as a haematoxin and decreased hemoglobin and MCV.

Detection of brain metastasis. Comparison of Turbo-FLAIR imaging, T2-weighted imaging and double-dose gadolinium-enhanced MR imaging

International Nuclear Information System (INIS)

Okubo, Toshiyuki; Hayashi, Naoto; Shirouzu, Ichiro; Abe, Osamu; Ohtomo, Kuni; Sasaki, Yasuhito; Aoki, Shigeki; Wada, Akihiko

1998-01-01

The purpose of this study was to compare Turbo-FLAIR imaging, T 2 -weighted imaging, and double-dose gadolinium-enhanced MR imaging in the detection of brain metastasis. Using the three sequences, 20 consecutive patients with brain metastases were prospectively studied with a 1.5-Tesla system. Three independent, blinded readers assessed the images for the presence, size, number, and location of metastatic lesions. In the detection of large lesions (>0.5 cm), Turbo-FLAIR imaging (38/48, 79%) was not significantly different from gadolinium-enhanced imaging (42/48, 88%) (p=0.273). T 2 -weighted imaging (31/48, 65%), however, was inferior to gadolinium-enhanced imaging (p<0.05). There was no difference between Turbo-FLAIR imaging and gadolinium-enhanced imaging in the accuracy of detecting solitary brain metastasis (4/4, 100%). In conclusion, Turbo-FLAIR imaging is a useful, noninvasive screening modality for brain metastasis. Its use may lead to cost savings in the diagnosis of brain metastases and may impact positively the cost-effectiveness of treatment. (author)

The Turbo-Fuel-Cell 1.0 - family concept

Science.gov (United States)

Berg, H. P.; Himmelberg, A.; Lehmann, M.; Dückershoff, R.; Neumann, M.

2018-01-01

The “Turbo-Fuel-Cell-Technology” has been described as a MGT-SOFC hybrid system consisting of a recuperated micro gas turbine (MGT) process with an embedded solid oxide fuel cell (SOFC) subsystem. SOFC stacks are connected to “SOFC stack grapes” and are equipped with the so called HEXAR-Module. This module is composed of a high-temperature heat exchanger (HEX), an afterburner (A) and a steam reformer (R). The MGT-concept is based on a generator driven directly by the turbomachine and a recuperator, which returns the exhaust heat to the pressurized compressor outlet air. This provides the necessary base for a highly effective, pure MGT process and the “MGT-SOFC-high-efficiency process”. This paper describes the concept and the thermodynamic background of a highly effective and compact design of the “Turbo-Fuel-Cell 1.0-Family” in the electrical performance class from 100 to 500 kW. The technological state of the system is shown and a rating of the system with comparative parameters is discussed. It becomes visible that all necessary basic technologies should be available and that the technology (for stationary applications) can have the “entry into services (E.I.S.)” in the next 10 years. The MGT-SOFC performance map under different operation conditions is discussed. This article also provides an overview of the research on MGT-SOFC-Systems and the scenario of an energy supply network and a mobile energy conversion of the future introduction.

Experimental assessment of pre-turbo aftertreatment configurations in a single stage turbocharged diesel engine. Part 1: Steady-state operation

OpenAIRE

Luján, José M.; Bermúdez, Vicente; Piqueras, P.; Garcia Afonso, Oscar

2015-01-01

Diesel oxidation catalysts and diesel particulate filters are standard aftertreatment systems in Diesel engines which are traditionally placed downstream of the turbine. However, pre-turbo aftertreatment configurations are being approached as a way to improve the aftertreatment performance in terms of light-off and passive regeneration. This exhaust line architecture can also benefit fuel economy. The objective of this work is to analyse experimentally how the pre-turbo aftertreatment placeme...

On the Comparative Performance Analysis of Turbo-Coded Non-Ideal Sigle-Carrier and Multi-Carrier Waveforms over Wideband Vogler-Hoffmeyer HF Channels

Directory of Open Access Journals (Sweden)

F. Genc

2014-09-01

Full Text Available The purpose of this paper is to compare the turbo-coded Orthogonal Frequency Division Multiplexing (OFDM and turbo-coded Single Carrier Frequency Domain Equalization (SC-FDE systems under the effects of Carrier Frequency Offset (CFO, Symbol Timing Offset (STO and phase noise in wide-band Vogler-Hoffmeyer HF channel model. In mobile communication systems multi-path propagation occurs. Therefore channel estimation and equalization is additionally necessary. Furthermore a non-ideal local oscillator generally is misaligned with the operating frequency at the receiver. This causes carrier frequency offset. Hence in coded SC-FDE and coded OFDM systems; a very efficient, low complex frequency domain channel estimation and equalization is implemented in this paper. Also Cyclic Prefix (CP based synchronization synchronizes the clock and carrier frequency offset.The simulations show that non-ideal turbo-coded OFDM has better performance with greater diversity than non-ideal turbo-coded SC-FDE system in HF channel.

Evaluation of diffusivity in the anterior lobe of the pituitary gland: 3D turbo field echo with diffusion-sensitized driven-equilibrium preparation.

Science.gov (United States)

Hiwatashi, A; Yoshiura, T; Togao, O; Yamashita, K; Kikuchi, K; Kobayashi, K; Ohga, M; Sonoda, S; Honda, H; Obara, M

2014-01-01

3D turbo field echo with diffusion-sensitized driven-equilibrium preparation is a non-echo-planar technique for DWI, which enables high-resolution DWI without field inhomogeneity-related image distortion. The purpose of this study was to evaluate the feasibility of diffusion-sensitized driven-equilibrium turbo field echo in evaluating diffusivity in the normal pituitary gland. First, validation of diffusion-sensitized driven-equilibrium turbo field echo was attempted by comparing it with echo-planar DWI. Five healthy volunteers were imaged by using diffusion-sensitized driven-equilibrium turbo field echo and echo-planar DWI. The imaging voxel size was 1.5 × 1.5 × 1.5 mm(3) for diffusion-sensitized driven-equilibrium turbo field echo and 1.5 × 1.9 × 3.0 mm(3) for echo-planar DWI. ADCs measured by the 2 methods in 15 regions of interests (6 in gray matter and 9 in white matter) were compared by using the Pearson correlation coefficient. The ADC in the pituitary anterior lobe was then measured in 10 volunteers by using diffusion-sensitized driven-equilibrium turbo field echo, and the results were compared with those in the pons and vermis by using a paired t test. The ADCs from the 2 methods showed a strong correlation (r = 0.79; P pituitary gland were 1.37 ± 0.13 × 10(-3) mm(2)/s, which were significantly higher than those in the pons (1.01 ± 0.24 × 10(-3) mm(2)/s) and the vermis (0.89 ± 0.25 × 10(-3) mm(2)/s, P pituitary gland.

T2-weighted MR imaging of liver lesions: a prospective evaluation comparing turbo spin-echo, breath-hold turbo spin-echo and half-Fourier turbo spin-echo (HASTE) sequences; Estudio de lesiones hepaticas con imagenes de resonancia magnetica potenciadas en T2: evaluacion prospectiva comparando secuencias turbo eco del espin, turbo eco del espin con respiracion sostenida y half-Fourier turbo eco del espin (HASTE)

Energy Technology Data Exchange (ETDEWEB)

Martin, J.; Villajos, M.; Oses, M. J.; Veintemillas, M.; Rue, M.; Puig, J.; Sentis, M. [Fundacion Parc Tauli. Sabadell (Spain)

2000-07-01

To compare turbo spin-echo (TSE), breath-hold TSE and half-Fourier acquisition single-shot turbo spin-echo (HASTE) sequences quantitatively and qualitatively in T2-weighted images of liver lesions. The authors evaluated prospectively 89 liver lesions in 73 patients using a 1.0-T magnetic resonance system to compare TSE, breath-hold TSE and HASTE sequences. The quantitative parameters were: lesion-to-liver contrast and lesion-to-liver contrast-to-noise ratio. The qualitative analysis was performed by two observers in consensus who examined four parameters: respiratory artifacts, lesion edge definition, intrahepatic vessel definition and image quality. Repeated measures analysis of variance was utilized to compare the quantitative variables and Friedman's nonparametric test for the qualitative parameters. In quantitative terms, the lesion-to-liver contrast was similar in TSE and breath-hold TSE sequences (2.45{+-}1.44 versus 2.60{+-}1.66), both of which were significantly better than the HASTE sequence (1.12{+-}0.72; p<0.001). The lesion-to-liver contrast-to-noise ratio was significantly higher in the TSE sequence (62.60{+-}46.40 versus 40.22{+-}25.35 versus 50.90{+-}32.10 for TSE, breath-hold TSE and HASTE sequences, respectively; p<0.001). In the qualitative comparisons, the HASTE sequence was significantly better than the TSE and breath-hold TSE sequences (p<0.001) in terms of artifacts and definition of lesion edge and intrahepatic vessels. Image quality was also significantly greater in the HASTE sequence (p<0.001). In quantitative terms, the TSE sequence is better than the breath-hold TSE and HASTE sequences, but there are no movement artifacts in the HASTE sequence, which is also significantly superior to TSE and breath-hold TSE sequences in qualitative terms and, thus, can be employed for T2-weighted images in liver studies. (Author) 17 refs.

Validation of Heat Transfer and Film Cooling Capabilities of the 3-D RANS Code TURBO

Science.gov (United States)

Shyam, Vikram; Ameri, Ali; Chen, Jen-Ping

2010-01-01

The capabilities of the 3-D unsteady RANS code TURBO have been extended to include heat transfer and film cooling applications. The results of simulations performed with the modified code are compared to experiment and to theory, where applicable. Wilcox s k-turbulence model has been implemented to close the RANS equations. Two simulations are conducted: (1) flow over a flat plate and (2) flow over an adiabatic flat plate cooled by one hole inclined at 35 to the free stream. For (1) agreement with theory is found to be excellent for heat transfer, represented by local Nusselt number, and quite good for momentum, as represented by the local skin friction coefficient. This report compares the local skin friction coefficients and Nusselt numbers on a flat plate obtained using Wilcox's k-model with the theory of Blasius. The study looks at laminar and turbulent flows over an adiabatic flat plate and over an isothermal flat plate for two different wall temperatures. It is shown that TURBO is able to accurately predict heat transfer on a flat plate. For (2) TURBO shows good qualitative agreement with film cooling experiments performed on a flat plate with one cooling hole. Quantitatively, film effectiveness is under predicted downstream of the hole.

Thermal efficiency improvement in high output diesel engines a comparison of a Rankine cycle with turbo-compounding

International Nuclear Information System (INIS)

Weerasinghe, W.M.S.R.; Stobart, R.K.; Hounsham, S.M.

2010-01-01

Thermal management, in particular, heat recovery and utilisation in internal combustion engines result in improved fuel economy, reduced emissions, fast warm up and optimized cylinder head temperatures. turbo-compounding is a heat recovery technique that has been successfully used in medium and large scale engines. Heat recovery to a secondary fluid and expansion is used in large scale engines, such as in power plants in the form of heat recovery steam generators (HRSG) . The present paper presents a thermodynamic analysis of turbo-compounding and heat recovery and utilisation through a fluid power cycle, a technique that is also applicable to medium and small scale engines. In a fluid power cycle, the working fluid is stored in a reservoir and expanded subsequently. The reservoir acts as an energy buffer that improves the overall efficiency, significantly. This paper highlights the relative advantage of exhaust heat secondary power cycles over turbo-compounding with the aid of MATLAB based QSS Toolbox simulation results. Steam has been selected as the working fluid in this work for its superior heat capacity over organic fluids and gases.

Traffic Efficiency Evaluation of Elliptical Roundabout Compared with Modern and Turbo Roundabouts Considering Traffic Signal Control

Directory of Open Access Journals (Sweden)

Hadi Hatami

2017-02-01

Full Text Available This paper compared the performance of elliptical roundabout with turbo and modern roundabouts. It considers the effects of increasing the central island radius and speed limit on delay and capacity. Three types of roundabouts (modern, turbo and elliptical roundabouts with different numbers of lanes (single lane, two-lane and three-lane were designed. Unsignalized and signalized controls were applied for these roundabouts. The robustness of the designed roundabouts was investigated for saturated and unsaturated flow conditions. Based on the obtained results, increasing the central island radius had both positive and negative effects on delay and capacity. However, a positive effect on these variables was observed in all roundabouts when increasing the speed limit. In unsignalized and signalized control under unsaturated flow conditions, a modern roundabout had lower delay time than an elliptical roundabout. Moreover, in saturated flow, the elliptical roundabout had the best performance in terms of delay. Overall, in comparison with the turbo roundabouts, modern and elliptical roundabouts had the highest capacities in unsignalized and signalized controls. This study can provide useful information for engineers who decide to design a roundabout.

Modernization of the turbo in the Laguna Verde Nuclear Power Plant

International Nuclear Information System (INIS)

Liebana, B.; Merino, A.; Cobos, A.; Gonzalez, J. J.

2010-01-01

The power increase of the Laguna Verde Nuclear Power Plant is a project for the rehabilitation and modernization of the turbo and associated equipment to get an increase of its power and of its service life. The project scope includes the design, the engineering, the equipment supply, the installation, the testing and the commissioning. This paper describes the first phase of the project.

T2-weighted MR imaging of liver lesions: a prospective evaluation comparing turbo spin-echo, breath-hold turbo spin-echo and half-Fourier turbo spin-echo (HASTE) sequences

International Nuclear Information System (INIS)

Martin, J.; Villajos, M.; Oses, M. J.; Veintemillas, M.; Rue, M.; Puig, J.; Sentis, M.

2000-01-01

To compare turbo spin-echo (TSE), breath-hold TSE and half-Fourier acquisition single-shot turbo spin-echo (HASTE) sequences quantitatively and qualitatively in T2-weighted images of liver lesions. The authors evaluated prospectively 89 liver lesions in 73 patients using a 1.0-T magnetic resonance system to compare TSE, breath-hold TSE and HASTE sequences. The quantitative parameters were: lesion-to-liver contrast and lesion-to-liver contrast-to-noise ratio. The qualitative analysis was performed by two observers in consensus who examined four parameters: respiratory artifacts, lesion edge definition, intrahepatic vessel definition and image quality. Repeated measures analysis of variance was utilized to compare the quantitative variables and Friedman's nonparametric test for the qualitative parameters. In quantitative terms, the lesion-to-liver contrast was similar in TSE and breath-hold TSE sequences (2.45±1.44 versus 2.60±1.66), both of which were significantly better than the HASTE sequence (1.12±0.72; p<0.001). The lesion-to-liver contrast-to-noise ratio was significantly higher in the TSE sequence (62.60±46.40 versus 40.22±25.35 versus 50.90±32.10 for TSE, breath-hold TSE and HASTE sequences, respectively; p<0.001). In the qualitative comparisons, the HASTE sequence was significantly better than the TSE and breath-hold TSE sequences (p<0.001) in terms of artifacts and definition of lesion edge and intrahepatic vessels. Image quality was also significantly greater in the HASTE sequence (p<0.001). In quantitative terms, the TSE sequence is better than the breath-hold TSE and HASTE sequences, but there are no movement artifacts in the HASTE sequence, which is also significantly superior to TSE and breath-hold TSE sequences in qualitative terms and, thus, can be employed for T2-weighted images in liver studies. (Author) 17 refs

LHCb : The LHCb Turbo stream

CERN Multimedia

Puig Navarro, Albert

2015-01-01

The LHCb experiment will record an unprecedented dataset of beauty and charm hadron decays during Run II of the LHC, set to take place between 2015 and 2018. A key computing challenge is to store and process this data, which limits the maximum output rate of the LHCb trigger. So far, LHCb has written out a few kHz of events containing the full raw sub-detector data, which are passed through a full offline event reconstruction before being considered for physics analysis. Charm physics in particular is limited by trigger output rate constraints. A new streaming strategy includes the possibility to perform the physics analysis with candidates reconstructed in the trigger, thus bypassing the offline reconstruction. In the "turbo stream" the trigger will write out a compact summary of "physics" objects containing all information necessary for analyses, and this will allow an increased output rate and thus higher average efficiencies and smaller selection biases. This idea will be commissioned and developed during...

Estado nutricional de niños palúdicos residentes en El Bagre y Turbo, Antioquia, Colombia, 2004-2005

Directory of Open Access Journals (Sweden)

Rosa Magdalena Uscátegui

2007-12-01

Resultados. La prevalencia de niños con desnutrición crónica moderada o grave fue de 22,6%; la de desnutrición global moderada o grave de 10,8% y la aguda de 2,3%. Las prevalencias fueron mayores entre varones y residentes en Turbo. Conclusiones. Las prevalencias de desnutrición fueron superiores a las reportadas en la última Encuesta Nacional de Demografía y Salud (2005, y en los residentes en Turbo fueron mayores a las encontradas en el Urabá antioqueño.

Upgrade and Extension of the Data Acquisition System for Propulsion and Gas Dynamic Laboratories

Science.gov (United States)

1992-06-01

Program: TURBO4 ............... 165 Figure D7 TPL Program: SCAN TEMP .... ........... .. 169 Figure DS TPL Program: TURBO -MENU . . .......... 170...User 1 Cape Command TURBO CGMPRI3 DESIGN UPI4753A WORK BACKUP PROGRAM EIT CKARGER LAB CAT DIR LISTINGS MENU * Figure 31 HP9000 Initial CRT Screen... diselS -Data filelSa":. 700,0,1" 140 Data disc2$-Data_file2S&" :.700,0,1" 150 ASSIGN UVatapat1l TO Data discl$ 160 ASSIGN IDatapatb2 TO Data diac2$ 170

An Off-Grid Turbo Channel Estimation Algorithm for Millimeter Wave Communications

Directory of Open Access Journals (Sweden)

Lingyi Han

2016-09-01

Full Text Available The bandwidth shortage has motivated the exploration of the millimeter wave (mmWave frequency spectrum for future communication networks. To compensate for the severe propagation attenuation in the mmWave band, massive antenna arrays can be adopted at both the transmitter and receiver to provide large array gains via directional beamforming. To achieve such array gains, channel estimation (CE with high resolution and low latency is of great importance for mmWave communications. However, classic super-resolution subspace CE methods such as multiple signal classification (MUSIC and estimation of signal parameters via rotation invariant technique (ESPRIT cannot be applied here due to RF chain constraints. In this paper, an enhanced CE algorithm is developed for the off-grid problem when quantizing the angles of mmWave channel in the spatial domain where off-grid problem refers to the scenario that angles do not lie on the quantization grids with high probability, and it results in power leakage and severe reduction of the CE performance. A new model is first proposed to formulate the off-grid problem. The new model divides the continuously-distributed angle into a quantized discrete grid part, referred to as the integral grid angle, and an offset part, termed fractional off-grid angle. Accordingly, an iterative off-grid turbo CE (IOTCE algorithm is proposed to renew and upgrade the CE between the integral grid part and the fractional off-grid part under the Turbo principle. By fully exploiting the sparse structure of mmWave channels, the integral grid part is estimated by a soft-decoding based compressed sensing (CS method called improved turbo compressed channel sensing (ITCCS. It iteratively updates the soft information between the linear minimum mean square error (LMMSE estimator and the sparsity combiner. Monte Carlo simulations are presented to evaluate the performance of the proposed method, and the results show that it enhances the angle

VALVE TURBO-ALTERNATOR AS ADDITIONAL HYBRID CAR DEVICE FOR THE HIGH-VOLTAGE BATTERY CHARGE

Directory of Open Access Journals (Sweden)

S. Kolesnikov

2009-01-01

Full Text Available The description of the hybrid car, its drive components and method of the solution of the problem with moving period of the car on electric pulling by means of valve turbo-alternator is given in this article.

Deficiencia de glucosa 6-fostato deshidrogenasa en hombres sanos y en pacientes maláricos; Turbo (Antioquia, Colombia Deficiency of glucose-6-phosphate dehydrogenase in healthy men and malaria patients; Turbo (Antioquia, Colombia

Directory of Open Access Journals (Sweden)

Jaime Carmona-Fonseca

2008-06-01

Full Text Available INTRODUCCIÓN: En América Latina la deficiencia de glucosa 6-fosfato deshidrogenasa (d-G6PD ha sido poco estudiada y en Colombia solo conocemos tres publicaciones antiguas. Urge conocer más la prevalencia de d-G6PD, sobre todo ahora que el tratamiento de la malaria vivax plantea aumentar la dosis diaria o total de primaquina. OBJETIVO: Medir la prevalencia de d-G6PD en poblaciones masculina sana y de enfermos con malaria por Plasmodium vivax, en Turbo (Urabá, departamento de Antioquia, Colombia. METODOLOGÍA: Encuestas de prevalencia, para evaluar la G6PD en dos poblaciones de Turbo (Antioquia: hombres sanos; hombres y mujeres con malaria vivax. Se trabajó con muestras diseñadas con criterios estadístico-epidemiológicos. La actividad enzimática se midió con el método normalizado de Beutler para valorar la G6PD en hemolizados. RESULTADOS: Entre los hombres sanos (n = 508, el intervalo de confianza 95% para el promedio (IC95% estuvo entre 4,15 y 4,51 UI/g hemoglobina y 14,8% presentaron valores por debajo del "límite normal" de INTRODUCTION: Glucose-6-phosphate dehydrogenase (G6PD deficiency in Latin America has not been fully studied and in Colombia only three outdated publications are known. Recent information on the prevalence of G6PD deficiency is required now, because the recommended treatment of vivax malaria requires higher daily or total doses of primaquine. OBJECTIVE: To measure the prevalence of G6PD in a healthy male population and in a Plasmodium vivax infected population in Turbo (Urabá, Antioquia Department, Colombia. METHOD: Prevalence survey to evaluate G6PD in two populations of Turbo (Antioquia: healthy male; male and female with vivax malaria. The work was carried out on population samples selected using statistical and epidemiological criteria. Enzyme activity was measured using Beutler's normalized method to evaluate G6PD after hemolysis. RESULTS: For the healthy male group (n = 508, and with a 95% confidence

14 CFR 121.643 - Fuel supply: Nonturbine and turbo-propeller-powered airplanes: Supplemental operations.

Science.gov (United States)

2010-01-01

... operating nontransport category airplanes type certificated after December 31, 1964, to fly for 30 minutes...-powered airplanes: Supplemental operations. 121.643 Section 121.643 Aeronautics and Space FEDERAL AVIATION... Flight Release Rules § 121.643 Fuel supply: Nonturbine and turbo-propeller-powered airplanes...

Optimal control design of turbo spin-echo sequences with applications to parallel-transmit systems

NARCIS (Netherlands)

Sbrizzi, Alessandro; Hoogduin, Hans; Hajnal, Joseph V; van den Berg, CAT; Luijten, Peter R; Malik, Shaihan J

PURPOSE: The design of turbo spin-echo sequences is modeled as a dynamic optimization problem which includes the case of inhomogeneous transmit radiofrequency fields. This problem is efficiently solved by optimal control techniques making it possible to design patient-specific sequences online.

Engineering & Performance of DuoTurbo: Microturbine with Counter-Rotating Runners

Science.gov (United States)

Biner, D.; Hasmatuchi, V.; Violante, D.; Richard, S.; Chevailler, S.; Andolfatto, L.; Avellan, F.; Münch, C.

2016-11-01

Considering the nuclear phase-out strategy of several European countries and the future tendency to promote renewable energies, the exploitation of small hydropower sites (industrial partners. The modular in-line “plug & play” technology requires low investment, reaching economic feasibility with an available power between 5 kW and 25 kW. One stage of the microturbine consists of two axial counter-rotating runners that form a compact independent unit. Each runner of the turbine holds its own rim generator, the DuoTurbo-configuration involving that each hydraulic runner is integral with each electrical rotor. The possibility of stacking several stages in series enables covering quite a wide range of hydraulic power and, thus, recovering a maximum of energy dissipated in release valves of water supply systems. The present work introduces the global concept of the implemented prototype of the DuoTurbo-microturbine, to target a maximal injected power of 5 kW for a discharge of 9 l/s and a head of 24.5 m per stage. The main features of the hydraulic, the mechanical, the electrical and the electronic design are presented. The hydraulic performance is, then, assessed using CFD simulations for the expected operating range. Finally, the performance measurements of the single-stage prototype installed in the hydraulic test rig of the HES-SO Valais//Wallis are presented.

Trellis and turbo coding iterative and graph-based error control coding

CERN Document Server

Schlegel, Christian B

2015-01-01

This new edition has been extensively revised to reflect the progress in error control coding over the past few years. Over 60% of the material has been completely reworked, and 30% of the material is original. Convolutional, turbo, and low density parity-check (LDPC) coding and polar codes in a unified framework. Advanced research-related developments such as spatial coupling. A focus on algorithmic and implementation aspects of error control coding.

The Unspoken Consequence of Command, Control Communications Technology: Enhanced Micromanagement by Risk-Averse Commanders

National Research Council Canada - National Science Library

Carozza, John

2004-01-01

.... However, along with its benefits, this command, control and communications (C3) network includes the dangerous consequence of eroding the autonomy of tactical command through enhanced micromanagement by risk-averse operational commanders...

SNR-optimized phase-sensitive dual-acquisition turbo spin echo imaging: a fast alternative to FLAIR.

Science.gov (United States)

Lee, Hyunyeol; Park, Jaeseok

2013-07-01

Phase-sensitive dual-acquisition single-slab three-dimensional turbo spin echo imaging was recently introduced, producing high-resolution isotropic cerebrospinal fluid attenuated brain images without long inversion recovery preparation. Despite the advantages, the weighted-averaging-based technique suffers from noise amplification resulting from different levels of cerebrospinal fluid signal modulations over the two acquisitions. The purpose of this work is to develop a signal-to-noise ratio-optimized version of the phase-sensitive dual-acquisition single-slab three-dimensional turbo spin echo. Variable refocusing flip angles in the first acquisition are calculated using a three-step prescribed signal evolution while those in the second acquisition are calculated using a two-step pseudo-steady state signal transition with a high flip-angle pseudo-steady state at a later portion of the echo train, balancing the levels of cerebrospinal fluid signals in both the acquisitions. Low spatial frequency signals are sampled during the high flip-angle pseudo-steady state to further suppress noise. Numerical simulations of the Bloch equations were performed to evaluate signal evolutions of brain tissues along the echo train and optimize imaging parameters. In vivo studies demonstrate that compared with conventional phase-sensitive dual-acquisition single-slab three-dimensional turbo spin echo, the proposed optimization yields 74% increase in apparent signal-to-noise ratio for gray matter and 32% decrease in imaging time. The proposed method can be a potential alternative to conventional fluid-attenuated imaging. Copyright © 2012 Wiley Periodicals, Inc.

Turbo Equalization Techniques Toward Robust PDM 16-QAM Optical Fiber Transmission

DEFF Research Database (Denmark)

Arlunno, Valeria; Caballero Jambrina, Antonio; Borkowski, Robert

2014-01-01

In this paper, we show numerically and experimentally that turbo equalization (TE) is an efficient technique to mitigate performance degradations stemming from optical fiber propagation effects in both optical fiber dispersion managed and unmanaged coherent detection links. The effectiveness....... As TE can be included in the current coherent detection transceiver technologies and complement other equalization techniques, it has prospects for application in next-generation high-capacity and long-reach optical transmission links....

Evaluation of myelination and myelination disorders with turbo inversion recovery magnetic resonance imaging

International Nuclear Information System (INIS)

Daldrup, H.E.; Schuierer, G.; Link, T.M.; Moeller, H.; Bick, U.; Peters, P.E.; Kurlemann, G.

1997-01-01

The aim of our work was to determine the efficacy of turbo inversion recovery spin echo (TIRSE) pulse sequences in differentiating patients with normal and abnormal myelination. Twenty neurological normal children (aged 5 months to 12 years) as well as 65 children presenting clinically with neurologic developmental deficits (aged 2 months to 10 years) were examined using TIRSE, T1-weighted SE, and T2-weighted turbo SE pulse sequences. Contrast-to-noise-ratio (CNR) between myelinated white and gray matter was compared for the different pulse sequences. In addition, two readers analyzed all images qualitatively by consensus. The CNR values were significantly higher on TIRSE images as compared with conventional images (p < 0.05). Forty-two neurologically abnormal patients displayed a normal myelination on all sequences, whereas 23 showed an abnormal myelination. The TIRSE sequence provided a sensitive and specific depiction of an abnormal myelination in all of these patients. The TIRSE sequence provided additional information to conventional pulse sequences in determining myelination disorders in children, especially in children older than 2 years. (orig.)

SYMBOL LEVEL DECODING FOR DUO-BINARY TURBO CODES

Directory of Open Access Journals (Sweden)

Yogesh Beeharry

2017-05-01

Full Text Available This paper investigates the performance of three different symbol level decoding algorithms for Duo-Binary Turbo codes. Explicit details of the computations involved in the three decoding techniques, and a computational complexity analysis are given. Simulation results with different couple lengths, code-rates, and QPSK modulation reveal that the symbol level decoding with bit-level information outperforms the symbol level decoding by 0.1 dB on average in the error floor region. Moreover, a complexity analysis reveals that symbol level decoding with bit-level information reduces the decoding complexity by 19.6 % in terms of the total number of computations required for each half-iteration as compared to symbol level decoding.

Final report on APMP.M.H-S3: Comparison on hardness measurement Rockwell scale A and B

Science.gov (United States)

Sanponpute, Tassanai; Meesaplak, Apichaya; Menelao, Febo; Chan, T. K.; Bahng, Gun-Woong; Titus, S. S. K.; Jain, S. K.

2012-01-01

The APMP.M.H-S3 Rockwell hardness intercomparison was initiated by NIMT, Thailand and the required protocol was prepared by NIMT and checked by Dr John Man, MNIA, Australia, in 2009. PTB, Germany, Standards and Calibration Laboratory (SCL), Hong Kong, National Physical Laboratory (NPLI), India, and Korea Research Institute of Standards and Science (KRISS), Korea, participated in this comparison. This comparison exercise was focused on the measurement range of 25 to 100 HRBW scale and 35 to 85 HRA scale. The round robin test was done during the period from April 2010 to October 2010. The participating laboratories have demonstrated the capability of the machine and the operating conditions according to ISO 6508 Part 3 to perform the measurements. However, SCL, Hong Kong, could demonstrate their capability to perform the measurements only according to ISO 6508 Part 2. The CMCs declared by the different laboratories lie in the range of 0.30 HRA to 0.40 HRA and 0.40 HRBW to 0.75 HRBW. The CMC declared by SCL for the Rockwell B scale is 1.5 HRBW for the reason described above. It is observed from the results that the measurement uncertainty is estimated not less than the CMCs declared by the laboratories. From the measurement results provided by all the participating laboratories, the En ratio was determined to establish the degrees of equivalence. The En ratio was calculated by including as well as by excluding the results of the laboratory which has performed the test according to ISO 6508 Part 2 in order to make sure that it does not affect the overall results. It is noticed that the En ratio was still found to remain less than 1. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the APMP, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

The new 1.6 l turbo spark-ignition engine by GM Powertrain Europe; Der neue 1,6-l-Turbo-Ottomotor von GM Powertrain Europe

Energy Technology Data Exchange (ETDEWEB)

Frensch, M.; Heusler, H.; Mohr, J.; Loehnert, T.; Steffens, K. [GM Powertrain Germany GmbH, Ruesselsheim (Germany)

2006-03-15

With this new turbo charged 1.6 l engine, GM Powertrain Europe presents another application from the mid-size gasoline engine family, internally called the Family 1 engine, which was first introduced in 2003. This third variant of the Family 1 Generation 3 architecture will be offered for the first time in the spring of 2006. It is combined with the M32 6-speed transmission in an Opel Meriva OPC as its top-of-the-line engine offering. Using an integrated exhaust manifold turbocharger, the engine reaches a maximum performance of 132 kW and a torque of 230 Nm. (orig.)

Pulsed arterial spin labeling using TurboFLASH with suppression of intravascular signal.

Science.gov (United States)

Pell, Gaby S; Lewis, David P; Branch, Craig A

2003-02-01

Accurate quantification of perfusion with the ADC techniques requires the suppression of the majority of the intravascular signal. This is normally achieved with the use of diffusion gradients. The TurboFLASH sequence with its ultrashort repetition times is not readily amenable to this scheme. This report demonstrates the implementation of a modified TurboFLASH sequence for FAIR imaging. Intravascular suppression is achieved with a modified preparation period that includes a driven equilibrium Fourier transform (DEFT) combination of 90 degrees-180 degrees-90 degrees hard RF pulses subsequent to the inversion delay. These pulses rotate the perfusion-prepared magnetization into the transverse plane where it can experience the suitably placed diffusion gradients before being returned to the longitudinal direction by the second 90 degrees pulse. A value of b = 20-30 s/mm(2) was thereby found to suppress the majority of the intravascular signal. For single-slice perfusion imaging, quantification is only slightly modified. The technique can be readily extended to multislice acquisition if the evolving flow signal after the DEFT preparation is considered. An advantage of the modified preparation scheme is evident in the multislice FAIR images by the preservation of the sign of the magnetization difference. Copyright 2003 Wiley-Liss, Inc.

Influence of Extrinsic Information Scaling Coefficient on Double-Iterative Decoding Algorithm for Space-Time Turbo Codes with Large Number of Antennas

Directory of Open Access Journals (Sweden)

TRIFINA, L.

2011-02-01

Full Text Available This paper analyzes the extrinsic information scaling coefficient influence on double-iterative decoding algorithm for space-time turbo codes with large number of antennas. The max-log-APP algorithm is used, scaling both the extrinsic information in the turbo decoder and the one used at the input of the interference-canceling block. Scaling coefficients of 0.7 or 0.75 lead to a 0.5 dB coding gain compared to the no-scaling case, for one or more iterations to cancel the spatial interferences.

Robotics development for the enhancement of space endeavors

Science.gov (United States)

Mauceri, A. J.; Clarke, Margaret M.

Telerobotics and robotics development activities to support NASA's goal of increasing opportunities in space commercialization and exploration are described. The Rockwell International activities center is using robotics to improve efficiency and safety in three related areas: remote control of autonomous systems, automated nondestructive evaluation of aspects of vehicle integrity, and the use of robotics in space vehicle ground reprocessing operations. In the first area, autonomous robotic control, Rockwell is using the control architecture, NASREM, as the foundation for the high level command of robotic tasks. In the second area, we have demonstrated the use of nondestructive evaluation (using acoustic excitation and lasers sensors) to evaluate the integrity of space vehicle surface material bonds, using Orbiter 102 as the test case. In the third area, Rockwell is building an automated version of the present manual tool used for Space Shuttle surface tile re-waterproofing. The tool will be integrated into an orbiter processing robot being developed by a KSC-led team.

Contrast-enhanced dynamic MR nephrography using the TurboFLASH navigator-gating technique in children

International Nuclear Information System (INIS)

Boss, Andreas; Schaefer, Juergen F.; Claussen, Claus D.; Kueper, Klaus; Schlemmer, Heinz-Peter; Martirosian, Petros; Schick, Fritz; Hacker, Hans-Walter; Darge, Kassa

2006-01-01

The purpose of this work was to test the feasibility of an MR examination protocol for the comprehensive assessment of renal morphology, excretion and split renal function using a navigator-gated TurboFLASH sequence. A navigator-gated T1-weighted single-slice TurboFLASH sequence suitable for dynamic MR urography and nephrography was implemented. A protocol was developed allowing for assessment of urinary excretion and split renal function by recording the renal clearance of a gadolinium (Gd) diethylene-triamine-pentacetic-acid (DTPA) bolus. Ten patients aged between 14 months and 14 years (mean age 4.8±4.6 years) were evaluated with the following indications: pelvicalyceal dilatation (n=4), follow-up after pyeloplasty (n=1), duplex systems (n=3), large renal cyst (n=1), and renal insufficiency (n=1). Dynamic MR urography and MR split renal function were compared to MAG3 scintigraphy. Evaluation of morphology, excretion and function required 50-60 minutes examination time, plus 10 minutes for post-processing. The TurboFLASH sequence yielded image acquisition at nearly identical diaphragm positions allowing for accurate region-of-interest evaluation within the renal parenchyma and the urinary passage. Static and dynamic MR urography showed the morphology of the urinary tract and excretion with sufficient diagnostic imaging quality, and the results were in diagnostic compliance with scintigraphy. MRI and scintigraphy yielded similar results for split renal function with a correlation coefficient of R=0.968 determined by linear regression. Our conclusions were that the method is robust, easy to perform on a clinical 1.5 T MRI system, rapid to evaluate and post-process and, therefore, easy to incorporate into clinical routine. Compared to scintigraphy, the higher spatial resolution of the MR examination provides additional important information improving the management of the pediatric patients without the application of radioactive tracers. (orig.)

The ergonomics of command and control

OpenAIRE

Stanton, NA; Baber, C

2006-01-01

Since its inception, just after the Second World War, ergonomics research has paid special attention to the issues surrounding human control of systems. Command and Control environments continue to represent a challenging domain for Ergonomics research. We take a broad view of Command and Control research, to include C2 (Command and Control), C3 (Command, Control and Communication), and C4 (Command, Control, Communication and Computers) as well as human supervisory control paradigms. This spe...

Command and Control of Joint Air Operations through Mission Command

Science.gov (United States)

2016-06-01

and outlines the C2 architecture systems, processes, and philosophy of com- mand required to enable mission command effectively. Mission Command...General Dempsey highlights the fact that “trust is the moral sinew that binds the distributed Joint Force 2020 together” and observes that “unless...con- fident about how their subordinates will make decisions and adapt to the dynamic battlespace environment. Processes, Systems, and Philosophy of

Study of heat insulated turbo compound engine. Shanetsugata tabo konpaundo engine to tomoni ayumu

Energy Technology Data Exchange (ETDEWEB)

Hirai, K [Isuzu Motors Ltd., Tokyo (Japan). Ceramics Research Lab.

1994-02-01

For a main purpose of development of the heat insulated turbo compound engine using the ceramics, the Isuzu Ceramics Inst. Co., Ltd. was established by the Isuzu Motors Ltd. in 1988. The main study subjects take up various topics such as a development of the new engine system for actualizing a low fuel consumption and low emission, an improvement of deteriorated combustion caused by the insulation, a development of energy recovery facility for utilizing effectively the exhaust energy from the engines, a development of power electronics technology for controlling the recovery facility, a study and development of ceramics as the insulation material and so forth. The outstanding characteristics of this institute are that a development of the heat insulated turbo compound engine is set as the main study subject, but at the same time that a commercialization of the various derivation technology derived from this study. Even just the main study subjects currently under way are counted up to a number close to 10 items, and consequently the efforts are being continued in each field assigned for solving the subjects. 6 figs.

AFRICOM: Combatant Command for the 21st Century

National Research Council Canada - National Science Library

Juergens, Jr., Richard A

2008-01-01

...: European Command, Southern Command, Northern Command, Central Command, and Pacific Command, as the Department of Defense's unified command structure responsible for specific geographical regions of the world...

Modelling of the heat load in the piston of turbo diesel engine - continuation

Directory of Open Access Journals (Sweden)

Piotr GUSTOF

2007-01-01

Full Text Available In this study the mathematical description of characteristic surfaces of the heat exchange of the piston and temperature distribution of the turbo diesel engine at the beginning phase its work was presented. The computations were performed by means of the two-zone combustion model, the boundary conditions of III kind and the finite elements method (MES by using of COSMOS/M program.

Determination of Permissible Short-Time Emergency Overloading of Turbo-Generators and Synchronous Compensators

Directory of Open Access Journals (Sweden)

V. A. Anischenko

2011-01-01

Full Text Available The paper shows that failure to take into account variable ratio of short-time emergency overloading of turbo-generators (synchronous compensators that can lead to underestimation of overloading capacity or impermissible insulation over-heating.A method has been developed for determination of permissible duration of short-time emergency over-loading that takes into account changes of over-loading ratio in case of a failure.

Empirical study of classification process for two-stage turbo air classifier in series

Science.gov (United States)

Yu, Yuan; Liu, Jiaxiang; Li, Gang

2013-05-01

The suitable process parameters for a two-stage turbo air classifier are important for obtaining the ultrafine powder that has a narrow particle-size distribution, however little has been published internationally on the classification process for the two-stage turbo air classifier in series. The influence of the process parameters of a two-stage turbo air classifier in series on classification performance is empirically studied by using aluminum oxide powders as the experimental material. The experimental results show the following: 1) When the rotor cage rotary speed of the first-stage classifier is increased from 2 300 r/min to 2 500 r/min with a constant rotor cage rotary speed of the second-stage classifier, classification precision is increased from 0.64 to 0.67. However, in this case, the final ultrafine powder yield is decreased from 79% to 74%, which means the classification precision and the final ultrafine powder yield can be regulated through adjusting the rotor cage rotary speed of the first-stage classifier. 2) When the rotor cage rotary speed of the second-stage classifier is increased from 2 500 r/min to 3 100 r/min with a constant rotor cage rotary speed of the first-stage classifier, the cut size is decreased from 13.16 μm to 8.76 μm, which means the cut size of the ultrafine powder can be regulated through adjusting the rotor cage rotary speed of the second-stage classifier. 3) When the feeding speed is increased from 35 kg/h to 50 kg/h, the "fish-hook" effect is strengthened, which makes the ultrafine powder yield decrease. 4) To weaken the "fish-hook" effect, the equalization of the two-stage wind speeds or the combination of a high first-stage wind speed with a low second-stage wind speed should be selected. This empirical study provides a criterion of process parameter configurations for a two-stage or multi-stage classifier in series, which offers a theoretical basis for practical production.

La Turbo-Egalisation pour les transmission numériques à grande efficacité spectrale sur les canaux sélectifs en fréquence

OpenAIRE

Le Bidan , Raphaël

2003-01-01

This thesis deals with the problem of combining equalization with decoding for high data rate bandwidth-efficient transmissions over frequency-selective channels. Specifically, we focus on Turbo-Equalization which establishes an exchange of soft information between the equalizer and the decoder in an iterative manner. We first consider MAP turbo-equalizers which rely on trellis-based equalizers optimum in the sense of minimizing the symbol error probability. We show that these receivers achie...

Assessment of diagnosing metastatic bone tumor on T2*-weighted images. Comparison between turbo spin echo (TSE) method and gradient echo (GE) method

International Nuclear Information System (INIS)

Hayashi, Takahiko; Sugiyama, Akira; Katayama, Motoyuki

1996-01-01

We examined the usefulness of T2 * weighted gradient field echo images for diagnosis for metastatic bone tumors in comparison with T2 weighted turbo spin echo (fast spin echo) images. In T2 * weighted gradient field echo sequence to obtain maximum contrast-to-noise ratio (CNR), we experimentally manipulated flip angle (FA) (5deg-90deg), repetition time (TR) (400, 700 msec), and echo time (TE) (10-50 msec). The best CNR was 16.4 in fast low angle shot (FLASH) (TE: 24 msec, TR: 700 msec, FA: 40deg). Magnetic resonance imaging was carried out in 28 patients with metastatic bone tumors. In addition to conventional T1 weighted spin echo images, T2 weighted turbo spin echo (fast spin echo images) and T2 * weighted gradient field echo images were obtained. T2 * weighted gradient field echo images were superior to T2 weighted turbo spin echo (fast spin echo) images in delineating the tumors, adjacent fat tissues, and bone marrow. (author)

Force Protection and Command Relationships: Who's Responsible

National Research Council Canada - National Science Library

Moller, James

1998-01-01

.... This monograph analyzes the joint force protection program by investigating the terms: command, chain of command, command relationship, and how these terms authorize and empower a commander to implement this program across the joint force...

Validation of DIVA: an expert system for the diagnostic of turbo-generator vibrations

International Nuclear Information System (INIS)

Chevalier, R.; Ricard, B.; Tiarri, J.P.; Bonnet, J.C.

1990-01-01

The project presented in this paper concerns the development of an expert system dealing with the diagnosis of turbo-generator vibrations. DIVA - Diagnosis of Shaft Line Vibrations - is a joint project which is carried out by ALSTHOM, Electricite de France and Laboratoire de Marcoussis, research centre of CGE. This article first presents the organisation of the system and then the goals and results of the tests already achieved [fr

Structured multi-stream command language

International Nuclear Information System (INIS)

Glad, A.S.

1982-12-01

A multi-stream command language was implemented to provide the sequential and decision-making operations necessary to run the neutral-beam ion sources connected to the Doublet III tokamak fusion device. A multi-stream command language was implemented in Pascal on a Classic 7870 running under MAX IV. The purpose of this paper is threefold. First, to provide a brief description of the programs comprising the command language including the operating system interaction. Second, to give a description of the language syntax and commands necessary to develop a procedure stream. Third, to provide a description of the normal operating procedures for executing either the sequential or interactive streams

Operational Safety Assessment of Turbo Generators with Wavelet Rényi Entropy from Sensor-Dependent Vibration Signals

Directory of Open Access Journals (Sweden)

Xiaoli Zhang

2015-04-01

Full Text Available With the rapid development of sensor technology, various professional sensors are installed on modern machinery to monitor operational processes and assure operational safety, which play an important role in industry and society. In this work a new operational safety assessment approach with wavelet Rényi entropy utilizing sensor-dependent vibration signals is proposed. On the basis of a professional sensor and the corresponding system, sensor-dependent vibration signals are acquired and analyzed by a second generation wavelet package, which reflects time-varying operational characteristic of individual machinery. Derived from the sensor-dependent signals’ wavelet energy distribution over the observed signal frequency range, wavelet Rényi entropy is defined to compute the operational uncertainty of a turbo generator, which is then associated with its operational safety degree. The proposed method is applied in a 50 MW turbo generator, whereupon it is proved to be reasonable and effective for operation and maintenance.

Application of computer techniques to charpy impact testing of irradiated pressure vessel steels

International Nuclear Information System (INIS)

Landow, M.P.; Fromm, E.O.; Perrin, J.S.

1982-01-01

A Rockwell AIM 65 microcomputer has been modified to control a remote Charpy V-notch impact test machine. It controls not only handling and testing of the specimen but also transference and storage of instrumented Charpy test data. A system of electrical solenoid activated pneumatic cylinders and switches provides the interface between the computer and the test apparatus. A command language has been designated that allows the operator to command checkout, test procedure, and data storage via the computer. Automatic compliance with ASTM test procedures is built into the program

Impact of Turbocharger Non-Adiabatic Operation on Engine Volumetric Efficiency and Turbo Lag

Directory of Open Access Journals (Sweden)

S. Shaaban

2012-01-01

Full Text Available Turbocharger performance significantly affects the thermodynamic properties of the working fluid at engine boundaries and hence engine performance. Heat transfer takes place under all circumstances during turbocharger operation. This heat transfer affects the power produced by the turbine, the power consumed by the compressor, and the engine volumetric efficiency. Therefore, non-adiabatic turbocharger performance can restrict the engine charging process and hence engine performance. The present research work investigates the effect of turbocharger non-adiabatic performance on the engine charging process and turbo lag. Two passenger car turbochargers are experimentally and theoretically investigated. The effect of turbine casing insulation is also explored. The present investigation shows that thermal energy is transferred to the compressor under all circumstances. At high rotational speeds, thermal energy is first transferred to the compressor and latter from the compressor to the ambient. Therefore, the compressor appears to be “adiabatic” at high rotational speeds despite the complex heat transfer processes inside the compressor. A tangible effect of turbocharger non-adiabatic performance on the charging process is identified at turbocharger part load operation. The turbine power is the most affected operating parameter, followed by the engine volumetric efficiency. Insulating the turbine is recommended for reducing the turbine size and the turbo lag.

Command and Control of Private Security Contractors: Are They a Viable Force Option for the Combatant Commander?

National Research Council Canada - National Science Library

Sherard, Scott H

2008-01-01

If a Combatant Commander (CCDR) or Joint Force Commander (JFC) were to take command of the approximately 25,000 security contractors in Iraq, a force of such size and capability would prove to be a valuable operational asset...

Analyses on the Performance and Interaction Between the Impeller and Casing in a Small-Size Turbo-Compressor

Science.gov (United States)

Kim, Youn-Jea; Kim, Dong-Won

The effects of casing shapes on the performance and the interaction between an impeller and a casing in a small-size turbo-compressor are investigated. Numerical analysis is conducted for the turbo-compressor with circular and single volute casings from the inlet to a discharge nozzle. The optimum design for each element is important to develop the small-size turbo-compressor using alternative refrigerant as a working fluid. Typically, the rotating speed of the compressor is in the range of 40000-45000rpm because of the small size of an impeller diameter. A blade of an impeller has backswept two-dimensional shape due to tip clearance and a vane diffuser has wedge type. In order to predict the flow pattern inside the entire impeller, the vaneless diffuser and the casing, calculations with multiple frames of reference method between the rotating and stationery parts of the domain are carried out. For compressible turbulent flow fields, the continuity and time-averaged three-dimensional Navier-Stokes equations are employed. To evaluate the performance of two types of casings, the static pressure recovery and loss coefficients are obtained with various flow rates. Also, static pressure distributions around casings are studied for different casing shapes, which are very important to predict the distribution of radial load. To prove the accuracy of numerical results, measurements of static pressure around the casing and pressure difference between the inlet and the outlet of the compressor are performed for the circular casing. The comparison of experimental and numerical results is conducted, and reasonable agreement is obtained.

DolphinAtack: Inaudible Voice Commands

OpenAIRE

Zhang, Guoming; Yan, Chen; Ji, Xiaoyu; Zhang, Taimin; Zhang, Tianchen; Xu, Wenyuan

2017-01-01

Speech recognition (SR) systems such as Siri or Google Now have become an increasingly popular human-computer interaction method, and have turned various systems into voice controllable systems(VCS). Prior work on attacking VCS shows that the hidden voice commands that are incomprehensible to people can control the systems. Hidden voice commands, though hidden, are nonetheless audible. In this work, we design a completely inaudible attack, DolphinAttack, that modulates voice commands on ultra...

Development of elements of the condition monitoring system of turbo generators of thermal power stations and nuclear power plants

Science.gov (United States)

Kumenko, A. I.; Kostyukov, V. N.; Kuz'minykh, N. Yu.; Boichenko, S. N.; Timin, A. V.

2017-08-01

The rationale is given for the improvement of the regulatory framework for the use of shaft sensors for the in-service condition monitoring of turbo generators and the development of control systems of shaft surfacing and misalignments of supports. A modern concept and a set of methods are proposed for the condition monitoring of the "shaft line-thrust bearing oil film-turbo generator supports" system elements based on the domestic COMPACS® technology. The system raw data are design, technology, installation, and operating parameters of the turbo generator as well as measured parameters of the absolute vibration of supports and mechanical quantities, relative displacements and relative vibration of the rotor teeth in accordance with GOST R 55263-2012. The precalculated shaft line assembly line in the cold state, the nominal parameters of rotor teeth positions on the dynamic equilibrium curve, the static and dynamic characteristics of the oil film of thrust bearings, and the shaft line stiffness matrix of unit support displacements have been introduced into the system. Using the COMPACS-T system, it is planned to measure positions and oscillations of rotor teeth, to count corresponding static and dynamic characteristics of the oil film, and the static and dynamic loads in the supports in real time. Using the obtained data, the system must determine the misalignments of supports and corrective alignments of rotors of coupling halves, voltages in rotor teeth, welds, and bolts of the coupling halves, and provide automatic conclusion if condition monitoring parameters correspond to standard values. A part of the methodological support for the proposed system is presented, including methods for determining static reactions of supports under load, the method for determining shaft line stiffness matrices, and the method for solving the inverse problem, i.e., the determination of the misalignments of the supports by measurements of rotor teeth relative positions in bearing

Literature review on medical incident command.

Science.gov (United States)

Rimstad, Rune; Braut, Geir Sverre

2015-04-01

It is not known what constitutes the optimal emergency management system, nor is there a consensus on how effectiveness and efficiency in emergency response should be measured or evaluated. Literature on the role and tasks of commanders in the prehospital emergency services in the setting of mass-casualty incidents has not been summarized and published. This comprehensive literature review addresses some of the needs for future research in emergency management through three research questions: (1) What are the basic assumptions underlying incident command systems (ICSs)? (2) What are the tasks of ambulance and medical commanders in the field? And (3) How can field commanders' performances be measured and assessed? A systematic literature search in MEDLINE, PubMed, PsycINFO, Embase, Cochrane Central Register of Controlled Trials, Cochrane Library, ISI Web of Science, Scopus, International Security & Counter Terrorism Reference Center, Current Controlled Trials, and PROSPERO covering January 1, 1990 through March 1, 2014 was conducted. Reference lists of included literature were hand searched. Included papers were analyzed using Framework synthesis. The literature search identified 6,049 unique records, of which, 76 articles and books where included in qualitative synthesis. Most ICSs are described commonly as hierarchical, bureaucratic, and based on military principles. These assumptions are contested strongly, as is the applicability of such systems. Linking of the chains of command in cooperating agencies is a basic difficulty. Incident command systems are flexible in the sense that the organization may be expanded as needed. Commanders may command by direction, by planning, or by influence. Commanders' tasks may be summarized as: conducting scene assessment, developing an action plan, distributing resources, monitoring operations, and making decisions. There is considerable variation between authors in nomenclature and what tasks are included or highlighted

Capturing a Commander's decision making style

Science.gov (United States)

Santos, Eugene; Nguyen, Hien; Russell, Jacob; Kim, Keumjoo; Veenhuis, Luke; Boparai, Ramnjit; Stautland, Thomas Kristoffer

2017-05-01

A Commander's decision making style represents how he weighs his choices and evaluates possible solutions with regards to his goals. Specifically, in the naval warfare domain, it relates the way he processes a large amount of information in dynamic, uncertain environments, allocates resources, and chooses appropriate actions to pursue. In this paper, we describe an approach to capture a Commander's decision style by creating a cognitive model that captures his decisionmaking process and evaluate this model using a set of scenarios using an online naval warfare simulation game. In this model, we use the Commander's past behaviors and generalize Commander's actions across multiple problems and multiple decision making sequences in order to recommend actions to a Commander in a manner that he may have taken. Our approach builds upon the Double Transition Model to represent the Commander's focus and beliefs to estimate his cognitive state. Each cognitive state reflects a stage in a Commander's decision making process, each action reflects the tasks that he has taken to move himself closer to a final decision, and the reward reflects how close he is to achieving his goal. We then use inverse reinforcement learning to compute a reward for each of the Commander's actions. These rewards and cognitive states are used to compare between different styles of decision making. We construct a set of scenarios in the game where rational, intuitive and spontaneous decision making styles will be evaluated.

Combatant Commanders Informational Series, USEUCOM

National Research Council Canada - National Science Library

Burton, Steven

1996-01-01

...) and the diverse challenges it faces require it to maintain one of the highest operational and personnel tempos of the combatant command, are limited in the opportunity of personnel new to the command...

STS-37 Commander Nagel in commanders seat on OV-104's flight deck

Science.gov (United States)

1991-01-01

STS-37 Commander Steven R. Nagel, wearing launch and entry suit (LES), sits at commanders station on the forward flight deck of Atlantis, Orbiter Vehicle (OV) 104. Surrounding Nagel are the seat headrest, control panels, checklists, forward flight deck windows, and three drinking water containers with straws attached to forward panel F2.

32 CFR 700.1053 - Commander of a task force.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Commander of a task force. 700.1053 Section 700... Command Detail to Duty § 700.1053 Commander of a task force. (a) A geographic fleet commander, and any other naval commander, may detail in command of a task force, or other task command, any eligible...

Command World

National Research Council Canada - National Science Library

Wong, Leah Y; Lange, Douglas S; Sebastyn, Jerome T; Roof, William H

2006-01-01

.... The Command World scenario was expressly designed as a crisis action planning exercise in order to replicate the communications, collaboration, and information requirements inherent in a military...

Command Decision-Making: Experience Counts

National Research Council Canada - National Science Library

Wolgast, Kelly A

2005-01-01

Decision-making is the mainstay of military leadership and command. Due to the changed nature of the current military environment, military commanders can no longer rely solely on the traditional Military Decision-making Process (MDMP...

Strength analysis of an aircraft turbo-compressor engine turbine disc

Science.gov (United States)

Klimko, Marek

2017-09-01

This article deals with a strength analysis of a gas turbine rotor disc of the concrete type of an aircraft turbo-compressor engine (ATCE). The introductory part is dedicated to a basic description of the given engine, including the main technical parameters entering the calculation. The calculation is carried out by the finite difference method. This method allows to determine the tension of a generally shaped disc, which is affected by centrifugal forces of its weight, external load and heat stress caused by the difference of thermal gradients along the disc radius. The result of calculations are dependencies of the most important parameters, such as the reduced stress, radial stress, or the safety coefficient along the disc radius.

MACROINVERTEBRADOS ASOCIADOS A LAS RAÍCES SUMERGIDAS DEL MANGLE ROJO (Rhizophora mangle EN LAS BAHÍAS TURBO Y EL UNO, GOLFO DE URABÁ (CARIBE COLOMBIANO

Directory of Open Access Journals (Sweden)

GARCÍA PADILLA JESÚS MARÍA

2010-05-01

Full Text Available Con el fin de establecer el comportamiento de la salinidad y las características de la fauna de macroinvertebrados asociados a las raíces de Rhizophora mangle en las Bahías de Turbo y El Uno, se realizaron cuatro muestreos entre septiembre del 2004 y febrero del 2005, en tres sectores de las Bahías. Los valores de salinidad experimentaron cambios muy importantes en el tiempo y fluctuaron entre 2 y 32 unidades. En total, se cuantificaron 26 especies en Bahía Turbo y 28 en Bahía El Uno. Mientras la diversidad en la Bahía Turbo varió entre 0,77 en septiembre y 2,22 noviembre, en Bahía El Uno, los valores fluctuaron entre 1,14 en noviembre y 1,95 en septiembre. La mayoría de las especies son frecuentes en las raíces de mangle de la región caribe y poseen un carácter eurihalino.

Paramount Interest: Command Relationships in Amphibious Warfare

National Research Council Canada - National Science Library

Peabody, Hitch

2004-01-01

In 2001, U.S. amphibious forces abandoned sixty years of established command and control doctrine, replacing the traditional senior-subordinate relationship between Navy and Marine commanders with coequal command. Why did it change...

Determination of vitality in myocardial infarction. Comparison of single- and multi-slice MRI techniques with TurboFlash and TrueFISP sequences

International Nuclear Information System (INIS)

Huber, A.; Schoenberg, S.O.; Spannagl, B.; Rieber, J.; Klauss, V.; Reiser, M.F.

2004-01-01

The aim of the study was to compare the diagnostic accuracy in imaging viability of the myocardium with a multislice inversions recovery 2D single shot TrueFISP sequence and an established inversion recovery TurboFlash sequence. Twelve patients with myocardial infarction were examined at a 1.5 tesla MR system (Sonata, Siemens, Medical Systems) 10 min after application of a single dose multihance (0,1 mmol/kg body weight) with a 2D multislice technique (inversion recovery single shot TrueFISP), that allows to image the entire short axis during one breathhold and a 2D single slice technique (inversion recovery TurboFlash), that requires one breathhold per slice. Signal intensity was determined in normal myocardium, in the infarcted myocardium and in the left ventricle. The contrast/noise ratio of normal and infarcted myocardium was determined. The areas of hyperintense infarction were compared for both sequence techniques. The multislice single shot 2D IR-TrueFisp sequence has a lower contrast/noise ratio than the IR-TurboFlash sequence (mean values 6.9 vs. 12.5) for viable and non viable myocardium. The assessment of the volume of the infarction is possible with excellent correlation of both techniques (r=0.97, p [de

Plan de marketing para el posicionamiento de mercado del Taller Automotriz "Los Turbos".

OpenAIRE

Lomas Lomas, Shirley Karina; Riera Cevallos, Jenny Belén

2015-01-01

Propuesta de un plan de marketing para mejorar el posicionamiento del taller automotriz “Los Turbos”, a través de la evaluación del comportamiento del cliente y el diseño de estrategias, que permitan al negocio obtener una ventaja competitiva, incrementando la cuota de mercado y las ventas crezcan. Proposal for a marketing plan to improve the positioning of the business "Turbos", through the evaluation of customer behavior and designing strategies that allow the business to obtain a ...

High technology at 'General Turbo', DH 12/13 balance-over speed testing stand

International Nuclear Information System (INIS)

Nuta, Florian Nicolae; Vasiliu, Dinu; Mauna, Traian

2005-01-01

'General Turbo' activity started in 1970 including building the balancing and over speed stand. DH 12/13 is the latest up-to-date facility of this type, the best one of the five in Europe, and was commissioned in 2004. The facility was especially built to be used for Romanian Nuclear Power Plant rotor testing and also for thermal very big rotors. The paper underlines the main attributes and the components of the facility DH 12/13 based on the Schenck technology. (authors)

Geometry Analysis and Effect of Turbulence Model on the Radial Rotor Turbo-Expander Design for Small Organic Rankine Cycle System

Directory of Open Access Journals (Sweden)

Maulana Arifin

2015-07-01

Full Text Available Organic Rankine Cycle (ORC is one of the most promising technology for small electric power generations. The geometry analysis and the effect of turbulence model on the radial turbo-expanders design for small ORC power generation systems were discussed in this paper. The rotor blades and performance were calculated using several working fluids such as R134a, R143a, R245fa, n-Pentane, and R123. Subsequently, a numerical study was carried out in the fluid flow area with R134a and R123 as the working fluids. Analyses were performed using Computational Fluid Dynamics (CFD ANSYS Multiphysics on two real gas models, with the k-epsilon and SST (shear stress transport turbulence models. The result shows the distribution of Mach number, pressure, velocity and temperature along the rotor blade of the radial turbo-expanders and estimation of performance at various operating conditions. The operating conditions are as follow: 250,000 grid mesh flow area, real gas model SST at steady state condition, 0.4 kg/s of mass flow rate, 15,000 rpm rotor speed, 5 bar inlet pressure, and 373K inlet temperature. By using those conditions, CFD analysis shows that the turbo-expander able to produce 6.7 kW and 5.5 kW of power when using R134a and R123, respectively.

Improved visualization of collateral ligaments of the ankle: multiplanar reconstructions based on standard 2D turbo spin-echo MR images

International Nuclear Information System (INIS)

Duc, Sylvain R.; Mengiardi, Bernard; Pfirrmann, Christian W.A.; Hodler, Juerg; Zanetti, Marco

2007-01-01

The purpose of the study was to evaluate the visualization of the collateral ankle ligaments on multiplanar reconstructions (MPR) based on standard 2D turbo spin-echo images. Coronal and axial T2-weighted turbo spin-echo and MPR angled parallel to the course of the ligaments of 15 asymptomatic and 15 symptomatic ankles were separately analyzed by two musculoskeletal radiologists. Image quality was assessed in the asymptomatic ankles qualitatively. In the symptomatic ankles interobserver agreement and reader confidence was determined for each ligament. On MPR the tibionavicular and calcaneofibular ligaments were more commonly demonstrated on a single image than on standard MR images (reader 1: 13 versus 0, P=0.002; reader 2: 14 versus 1, P=0.001 and reader 1: 13 versus 2, P=0.001; reader 2: 14 versus 0, P<0.001). The tibionavicular ligament was considered to be better delineated on MPR by reader 1 (12 versus 3, P=0.031). In the symptomatic ankles, reader confidence was greater with MPR for all ligaments except for the tibiocalcanear ligament (both readers) and the anterior and posterior talofibular ligaments (for reader 2). Interobserver agreement was increased with MPR for the tibionavicular ligament. Multiplanar reconstructions of 2D turbo spin-echo images improve the visualization of the tibionavicular and calcaneofibular ligaments and strengthen diagnostic confidence for these ligaments. (orig.)

A verification plan of rotor dynamics of turbo-machine system supported by AMB for the GTHTR300 (step 1)

International Nuclear Information System (INIS)

Takizuka, Takakazu; Takada, Shoji; Kosugiyama, Shinichi; Kunitomi, Kazuhiko; Xing, Yan

2003-01-01

A program for research and development on magnetic bearing suspended rotor dynamics was planned for the Gas Turbine High Temperature Reactor (GTHTR300) plant. The magnetic bearing to suspend the turbo-machine rotor of GTHTR300 is unique because the required load capacity is much larger than that of existing one. The turbo-compressor and generator rotors, each of which is suspended by two radial bearings, pass over the first and the second critical speeds to bending mode, respectively. The rotor design fulfilled the standard limit of vibration amplitude of 75 μm at the rated rotational speed by optimising the stiffness of the magnetic bearings. A test apparatus was designed in the program. The test apparatus is composed of 1/3-scale two test rotors simulating turbo-compressor and generator rotors which are connected by a flexible coupling or a rigid coupling. Because the load capacity is almost in proportion to the projected area of the bearing, the load capacity of the magnetic bearing is almost 1/10 of the actual one. The test rotors were designed so that their critical speeds and vibration modes match the actual ones. The test will verify the rotor design and demonstrate the rotor vibration control technology of the magnetic bearing. This paper shows the outline of the test device and the test plan for the magnetic bearing suspended rotor system. The present study is entrusted from the Ministry of Education, Culture, Sports, Science and Technology of Japan. (author)

Test Telemetry And Command System (TTACS)

Science.gov (United States)

Fogel, Alvin J.

1994-01-01

The Jet Propulsion Laboratory has developed a multimission Test Telemetry and Command System (TTACS) which provides a multimission telemetry and command data system in a spacecraft test environment. TTACS reuses, in the spacecraft test environment, components of the same data system used for flight operations; no new software is developed for the spacecraft test environment. Additionally, the TTACS is transportable to any spacecraft test site, including the launch site. The TTACS is currently operational in the Galileo spacecraft testbed; it is also being provided to support the Cassini and Mars Surveyor Program projects. Minimal personnel data system training is required in the transition from pre-launch spacecraft test to post-launch flight operations since test personnel are already familiar with the data system's operation. Additionally, data system components, e.g. data display, can be reused to support spacecraft software development; and the same data system components will again be reused during the spacecraft integration and system test phases. TTACS usage also results in early availability of spacecraft data to data system development and, as a result, early data system development feedback to spacecraft system developers. The TTACS consists of a multimission spacecraft support equipment interface and components of the multimission telemetry and command software adapted for a specific project. The TTACS interfaces to the spacecraft, e.g., Command Data System (CDS), support equipment. The TTACS telemetry interface to the CDS support equipment performs serial (RS-422)-to-ethernet conversion at rates between 1 bps and 1 mbps, telemetry data blocking and header generation, guaranteed data transmission to the telemetry data system, and graphical downlink routing summary and control. The TTACS command interface to the CDS support equipment is nominally a command file transferred in non-real-time via ethernet. The CDS support equipment is responsible for

Two-stage turbo-compressor for heat pumps. Stage 1: Feasibility study; Compresseur radial pour pompe a chaleur bietagee. Phase 1: etude de faisabilite

Energy Technology Data Exchange (ETDEWEB)

Shiffmann, J; Molyneaux, A [Ofttech SA, Parc Scientifique de l' EPFL-C, Lausanne (Switzerland); Favrat, D; Marechal, F; Zehnder, M; Godat, J [Swiss Federal Institue of Technology (EPFL), Laboratoire d' energetique industrielle, Lausanne (Switzerland)

2002-07-01

This report describes the work performed by Ofttech SA, in collaboration with the Industrial Energy Laboratory (LENI) of the Swiss Federal Institute of Technology (EPFL) in Lausanne, investigating the feasibility of designing an oil-free turbo-compressor for domestic retrofit heat pump applications. The primary objective for a retrofit heat pump is that it produces heating water at 60 {sup o}C (with at least 10 {sup o}C temperature rise) with an external air temperature of -12 {sup o}C and can supply at least 10 kW. This would enable the air-water heat pump to directly replace oil or gas boilers. To enable a heat pump to produce the required hot water with a sufficient Coefficient of Performance (COP) a two-stage compressor is the most sensible technical solution currently available. This report shows how a turbo-compressor consisting of a single rotor with two centrifugal compressor wheels, running at variable speeds up to 240,000 rpm, can provide a unique solution with better predicted performance than existing solutions. This is possible by the use of bearings lubricated with gaseous refrigerant - excluding completely the need for oil in the system with its associated heat transfer, system, environmental and cost disadvantages. These bearings need radial clearances between 5 and 10 micrometers, leading to manufacturing tolerances in the order of magnitude of one micrometer. Various possible refrigerants are discussed with R134a being chosen for this study. Investigations performed by the company Asea Brown Boveri (ABB) are reported showing the possible design of the two small turbo-compressors resulting in wheels of less than 20 mm. The electric motor for this directly driven compressor together with the wheels and gas bearings will result in a complete rotor of less than 100 mm long - making it smaller, lighter and cheaper than existing compressors. The main conclusion is that the overall performance of this novel turbo-compressor when compared with the

U.S. Pacific Command > About USPACOM > History

Science.gov (United States)

USPACOM U.S. Pacific Command Search USPACOM: Search Search Search USPACOM: Search Home Leadership People's Republic of China, the Democratic People's Republic of Korea, Mongolia, and the Republic of its surrounding waters under the leadership of one commander, providing a unity of command absent from

Global Command and Control Management Structure

National Research Council Canada - National Science Library

1995-01-01

This instruction establishes: responsibilities for the Joint Staff, Services, Defense agencies, combatant and functional unified commands, and other activities regarding management of Global Command and Control (GCC...

A Novel wave-form command shaper for overhead cranes

Directory of Open Access Journals (Sweden)

KHALED ALHAZZA

2013-12-01

Full Text Available In this work, a novel command shaping control strategy for oscillation reduction of simple harmonic oscillators is proposed, and validated experimentally. A wave-form acceleration command shaper is derived analytically. The performance of the proposed shaper is simulated numerically, and validated experimentally on a scaled model of an overhead crane. Amplitude modulation is used to enhance the shaper performance, which results in a modulated wave-form command shaper. It is determined that the proposed wave-form and modulated wave-form command shaper profiles are capable of eliminating travel and residual oscillations. Furthermore, unlike traditional impulse and step command shapers, the proposed command shaper has piecewise smoother acceleration, velocity, and displacement profiles. Experimental results using continuous and discrete commands are presented. Experiments with discrete commands involved embedding a saturation model-based feedback in the algorithm of the command shaper.

Command in a field hospital.

Science.gov (United States)

Bricknell, M C M

2003-03-01

This paper examines the challenges involved in commanding a field hospital. There are frequent, dynamic tensions between the military culture that is based on a task-focussed, hierarchical structure and the clinical culture that is based on flat, process-focussed, multidisciplinary teams. The paper outlines the cultural environment of the field hospital and then examines the deployment sequence whereby a functioning clinical facility may be created from a group of disparate individuals. There are a number of tools that may assist with this including the personality of the Commanding Officer, individual skills, the creation of an organizational identity and the choice of command structure.

Turbo-Satori: a neurofeedback and brain-computer interface toolbox for real-time functional near-infrared spectroscopy.

Science.gov (United States)

Lührs, Michael; Goebel, Rainer

2017-10-01

Turbo-Satori is a neurofeedback and brain-computer interface (BCI) toolbox for real-time functional near-infrared spectroscopy (fNIRS). It incorporates multiple pipelines from real-time preprocessing and analysis to neurofeedback and BCI applications. The toolbox is designed with a focus in usability, enabling a fast setup and execution of real-time experiments. Turbo-Satori uses an incremental recursive least-squares procedure for real-time general linear model calculation and support vector machine classifiers for advanced BCI applications. It communicates directly with common NIRx fNIRS hardware and was tested extensively ensuring that the calculations can be performed in real time without a significant change in calculation times for all sampling intervals during ongoing experiments of up to 6 h of recording. Enabling immediate access to advanced processing features also allows the use of this toolbox for students and nonexperts in the field of fNIRS data acquisition and processing. Flexible network interfaces allow third party stimulus applications to access the processed data and calculated statistics in real time so that this information can be easily incorporated in neurofeedback or BCI presentations.

Energy and exergy analysis of the turbo-generators and steam turbine for the main feed water pump drive on LNG carrier

International Nuclear Information System (INIS)

Mrzljak, Vedran; Poljak, Igor; Mrakovčić, Tomislav

2017-01-01

Highlights: • Two low-power steam turbines in the LNG carrier propulsion plant were investigated. • Energy and exergy efficiencies of both steam turbines vary between 46% and 62%. • The ambient temperature has a low impact on exergy efficiency of analyzed turbines. • The maximum efficiencies area of both turbines was investigated. • A method for increasing the turbo-generator efficiencies by 1–3% is presented. - Abstract: Nowadays, marine propulsion systems are mainly based on internal combustion diesel engines. Despite this fact, a number of LNG carriers have steam propulsion plants. In such plants, steam turbines are used not only for ship propulsion, but also for electrical power generation and main feed water pump drive. Marine turbo-generators and steam turbine for the main feed water pump drive were investigated on the analyzed LNG carrier with steam propulsion plant. The measurements of various operating parameters were performed and obtained data were used for energy and exergy analysis. All the measurements and calculations were performed during the ship acceleration. The analysis shows that the energy and exergy efficiencies of both analyzed low-power turbines vary between 46% and 62% what is significantly lower in comparison with the high-power steam turbines. The ambient temperature has a low impact on exergy efficiency of analyzed turbines (change in ambient temperature for 10 °C causes less than 1% change in exergy efficiency). The highest exergy efficiencies were achieved at the lowest observed ambient temperature. Also, the highest efficiencies were achieved at 71.5% of maximum developed turbo-generator power while the highest efficiencies of steam turbine for the main feed water pump drive were achieved at maximum turbine developed power. Replacing the existing steam turbine for the main feed water pump drive with an electric motor would increase the turbo-generator energy and exergy efficiencies for at least 1–3% in all analyzed

Design and Testing of a Combustor for a Turbo-Ramjet Engine for UAV and Missile Applications

Science.gov (United States)

2003-03-01

CA, September 1999. 6. Al- Namani , S . M., Development of Shrouded Turbojet to Form a Turboramjet for Future Missile Applications, Master’s Thesis...Turbo- ramjet Engine for UAV and Missile Applications 6. AUTHOR( S ) Ross H. Piper III 5. FUNDING NUMBERS 7. PERFORMING ORGANIZATION NAME( S ) AND...ADDRESS(ES) Naval Postgraduate School Monterey, CA 93943-5000 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING / MONITORING AGENCY NAME( S

Soviet command and control in a historical context

OpenAIRE

Kern, Jeffrey A.

1981-01-01

Approved for public release; distribution is unlimited An examination is made of the historical antecedents of present day command and control doctrine in the Soviet Union. The continuity of principal characteristics is demonstrated. The ideological determinants shaping the command and control system are first developed. These include centralism, collective decision-making, unity of command, and redundancy. Practical consequences of these are explored. The functioning of Soviet command...

[The detector, the command neuron and plastic convergence].

Science.gov (United States)

Sokolov, E N

1977-01-01

The paper deals with the structure of detectors, the function of commanding neurones and the problem of relationship between detectors and commanding neurons. An example of hierarchial organization of detectors is provided by the colour analyser in which a layer of receptors, a layer of opponent neurones and a layer of colour-selective detectors are singled out. The colour detector is selectively sensitive to a certain combination of excitations at the input. If the detector is selectively activated by a certain combination of excitations at the input, the selective activation of the commanding neurone through a pool of motoneurones brings about a reaction at the output, specific in its organization. The reflexogenic zone of the reaction is determined by the detectors which converge on the commanding neurone controlling the given reaction. The plasticity of the reaction results from a plastic convergence of the detectors on the commanding neurone which controls the reaction. This comprises selective switching off the detectors from the commanding neurone (habituation) and connecting the detectors to the commanding neurone (facilitation).

The Battle Command Sustainment Support System: Initial Analysis Report

Science.gov (United States)

2016-09-01

products including jet fuels, distillate fuels, residual fuels, automotive gasoline , specified bulk lubricating oils, aircraft engine oils, fuel...contained within this report. 15. SUBJECT TERMS Mission command Software Tactical applications (TacApps) Command post ...computing environment (CPCE) Command post client Battle command sustainment support System (BCS3) Logistics

Post remedial action survey report for Building 003, Santa Susana Field Laboratories, Rockwell International, Ventura County, California, October 1981; April 1982. Surplus Facilities Management Program

International Nuclear Information System (INIS)

Wynveen, R.A.; Smith, W.H.; Sholeen, C.M.; Justus, A.L.; Flynn, K.F.

1983-10-01

Rockwell International's Santa Susana Laboratories in Ventura County, California, have been the site of numerous Federally-funded projects involving the use of radioactive materials. One such project was the System for Nuclear Auxiliary Power (SNAP) Program. Building 003 on the Santa Susana site was used in conjunction with the SNAP Program and contained a highly shielded area designed for remote manipulation of radioactive materials. Such facilities are commonly referred to as hot caves. During the SNAP Program, fuel burnup samples were analyzed and irradiation experiments were evaluated in the Building 003 hot cave. Use of the hot cave facility ended when the SNAP Program was terminated in 1973. Subsequently, the Building 003 facilities were declared excess and were decontaminaed and decommissioned during the first half of calendar year 1975. At that time, the building was given a preliminary release. In 1981, a post-remedial-action (certification) survey of Building 003 was conducted at the request of the Department of Energy. Significant levels of residual contamination were found in various parts of the building. Consequently, additional decontamination was conducted by Rockwell International. A final post-remedial-action survey was conducted during April 1982, and those areas in Building 003 that had been found contaminated in 1981 were now found to be free of detectable radioactive contamination. Sludge samples taken from the sewer sump showed elevated levels of enriched uranium contaminant. Hence, all sewer lines within Building 003 were removed. This permitted unconditional release of the building for unrestricted use. However, the sewer lines exterior to the building, which remain in place, must be considered potentially contaminated and, therefore, subject to restricted use

BER performance comparison of optical CDMA systems with/without turbo codes

Science.gov (United States)

Kulkarni, Muralidhar; Chauhan, Vijender S.; Dutta, Yashpal; Sinha, Ravindra K.

2002-08-01

In this paper, we have analyzed and simulated the BER performance of a turbo coded optical code-division multiple-access (TC-OCDMA) system. A performance comparison has been made between uncoded OCDMA and TC-OCDMA systems employing various OCDMA address codes (optical orthogonal codes (OOCs), Generalized Multiwavelength Prime codes (GMWPC's), and Generalized Multiwavelength Reed Solomon code (GMWRSC's)). The BER performance of TC-OCDMA systems has been analyzed and simulated by varying the code weight of address code employed by the system. From the simulation results, it is observed that lower weight address codes can be employed for TC-OCDMA systems that can have the equivalent BER performance of uncoded systems employing higher weight address codes for a fixed number of active users.

32 CFR 700.1054 - Command of a naval base.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Command of a naval base. 700.1054 Section 700.1054 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY... Command Detail to Duty § 700.1054 Command of a naval base. The officer detailed to command a naval base...

An Iterative Multiuser Detector for Turbo-Coded DS-CDMA Systems

Directory of Open Access Journals (Sweden)

Takawira Fambirai

2005-01-01

Full Text Available We propose an iterative multiuser detector for turbo-coded synchronous and asynchronous direct-sequence CDMA (DS-CDMA systems. The receiver is derived from the maximum a posteriori (MAP estimation of the single user's transmitted data, conditioned on information about the estimate of the multiple-access interference (MAI and the received signal from the channel. This multiple-access interference is reconstructed by making hard decisions on the users' detected bits at the preceding iteration. The complexity of the proposed receiver increases linearly with the number of users. The proposed detection scheme is compared with a previously developed one. The multiuser detector proposed in this paper has a better performance when the transmitted powers of all active users are equal in the additive white Gaussian noise (AWGN channel. Also, the detector is found to be resilient against the near-far effect.

32 CFR 215.7 - Command relationships.

Science.gov (United States)

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Command relationships. 215.7 Section 215.7 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS EMPLOYMENT OF MILITARY RESOURCES IN THE EVENT OF CIVIL DISTURBANCES § 215.7 Command relationships...

TURBO: a computer program for two-dimensional incompressible fluid flow analysis using a two-equations turbulence model

International Nuclear Information System (INIS)

Botelho, D.A.; Moreira, M.L.

1991-06-01

The Reynolds turbulent transport equations for an incompressible fluid are integrated on a bi-dimensional staggered grid, for velocity and pressure, using the SIMPLER method. With the resulting algebraic relations it was developed the TURBO program, which final objectives are the thermal stratification and natural convection analysis of nuclear reactor pools. This program was tested in problems applications with analytic or experimental solutions previously known. (author)

Turbo-Proton Echo Planar Spectroscopic Imaging (t-PEPSI) MR technique in the detection of diffuse axonal damage in brain injury. Comparison with Gradient-Recalled Echo (GRE) sequence.

Science.gov (United States)

Giugni, E; Sabatini, U; Hagberg, G E; Formisano, R; Castriota-Scanderbeg, A

2005-01-01

Diffuse axonal injury (DAI) is a common type of primary neuronal injury in patients with severe traumatic brain injury, and is frequently accompanied by tissue tear haemorrhage. The T2*-weighted gradient-recalled echo (GRE) sequences are more sensitive than T2-weighted spin-echo images for detection of haemorrhage. This study was undertaken to determine whether turbo-PEPSI, an extremely fast multi-echo-planar-imaging sequence, can be used as an alternative to the GRE sequence for detection of DAI. Nineteen patients (mean age 24,5 year) with severe traumatic brain injury (TBI), occurred at least 3 months earlier, underwent a brain MRI study on a 1.5-Tesla scanner. A qualitative evaluation of the turbo-PEPSI sequences was performed by identifying the optimal echo time and in-plane resolution. The number and size of DAI lesions, as well as the signal intensity contrast ratio (SI CR), were computed for each set of GRE and turbo-PEPSI images, and divided according to their anatomic location into lobar and/or deep brain. There was no significant difference between GRE and turbo-PEPSI sequences in the total number of DAI lesions detected (283 vs 225 lesions, respectively). The GRE sequence identified a greater number of hypointense lesions in the temporal lobe compared to the t-PEPSI sequence (72 vs 35, pPEPSI than for the GRE sequence (pPEPSI sequence can be used as an alternative to the GRE to assess brain DAI in severe TBI patients, especially if uncooperative and medically unstable.

Schema for Spacecraft-Command Dictionary

Science.gov (United States)

Laubach, Sharon; Garcia, Celina; Maxwell, Scott; Wright, Jesse

2008-01-01

An Extensible Markup Language (XML) schema was developed as a means of defining and describing a structure for capturing spacecraft command- definition and tracking information in a single location in a form readable by both engineers and software used to generate software for flight and ground systems. A structure defined within this schema is then used as the basis for creating an XML file that contains command definitions.

Turbo Pascal Computer Code for PIXE Analysis

International Nuclear Information System (INIS)

Darsono

2002-01-01

To optimal utilization of the 150 kV ion accelerator facilities and to govern the analysis technique using ion accelerator, the research and development of low energy PIXE technology has been done. The R and D for hardware of the low energy PIXE installation in P3TM have been carried on since year 2000. To support the R and D of PIXE accelerator facilities in harmonize with the R and D of the PIXE hardware, the development of PIXE software for analysis is also needed. The development of database of PIXE software for analysis using turbo Pascal computer code is reported in this paper. This computer code computes the ionization cross-section, the fluorescence yield, and the stopping power of elements also it computes the coefficient attenuation of X- rays energy. The computer code is named PIXEDASIS and it is part of big computer code planed for PIXE analysis that will be constructed in the near future. PIXEDASIS is designed to be communicative with the user. It has the input from the keyboard. The output shows in the PC monitor, which also can be printed. The performance test of the PIXEDASIS shows that it can be operated well and it can provide data agreement with data form other literatures. (author)

32 CFR 552.65 - Command supervision.

Science.gov (United States)

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Command supervision. 552.65 Section 552.65 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY MILITARY RESERVATIONS AND NATIONAL CEMETERIES REGULATIONS AFFECTING MILITARY RESERVATIONS Solicitation on Military Reservations § 552.65 Command supervision. (a) All insurance...

The Marihuana Dilemma: Challenge to Commanders.

Science.gov (United States)

The marihuana dilemma poses a major challenge to commanders in the US Army today. The problem was analyzed as to the characteristics of the drug...available to commanders to meet the challenge. The essay concludes that marihuana should not be legalized; drug users or former drug users should not be

Issues and Solutions for Command Post Simulations

National Research Council Canada - National Science Library

Stytz, Martin R; Banks, Sheila B

2006-01-01

.... Unfortunately, the modeling of joint command post teams is still very much in its infancy and this lack of foundational research hinders our ability to assess the performance of command post teams...

76 FR 19893 - Unified Command Plan 2011

Science.gov (United States)

2011-04-08

... Plan 2011 Memorandum for the Secretary of Defense Pursuant to my authority as Commander in Chief, I hereby approve and direct the implementation of the revised Unified Command Plan. Consistent with title...

Order of 4 November 1988 on treatment by ionizing radiation of rice flour and its products obtained by turbo-separation

International Nuclear Information System (INIS)

1988-01-01

This Order fixes the conditions for the sale of rice flour and products obtained from its turbo-separation whose microbial decontamination was obtained through exposure to cobalt 60 or cesium 137 gamma-rays or accelerated electron beams with an energy below or equal to 10 Mev. (NEA) [fr

Command and motivation

DEFF Research Database (Denmark)

Jacobsen, Christian Bøtcher; Hvidtved, Johan; Andersen, Lotte Bøgh

2014-01-01

Motivated employees are crucial to organizations, but external interventions such as command systems and financial incentives may decrease motivation. If these external interventions are perceived to be controlling, they are expected to crowd out intrinsic motivation, and this may also apply...... to other types of autonomous motivation such as public service motivation. The perception of external interventions is thus expected to be vital. This article investigates how the perception of a specific command system (obligatory student plans) is associated with intrinsic motivation and public service...... motivation. Using a dataset with 3,230 school teachers in Denmark, a structural equation model shows that the perception of obligatory student plans as controlling is negatively associated with all of the investigated types of employee motivation, supporting that motivation crowding can occur....

32 CFR 700.1056 - Command of a ship.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Command of a ship. 700.1056 Section 700.1056 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY REGULATIONS AND OFFICIAL RECORDS UNITED STATES NAVY REGULATIONS AND OFFICIAL RECORDS Precedence, Authority and Command Detail to Duty § 700.1056 Command of a...

Annealing of Co-Cr dental alloy: effects on nanostructure and Rockwell hardness.

Science.gov (United States)

Ayyıldız, Simel; Soylu, Elif Hilal; Ide, Semra; Kılıç, Selim; Sipahi, Cumhur; Pişkin, Bulent; Gökçe, Hasan Suat

2013-11-01

The aim of the study was to evaluate the effect of annealing on the nanostructure and hardness of Co-Cr metal ceramic samples that were fabricated with a direct metal laser sintering (DMLS) technique. Five groups of Co-Cr dental alloy samples were manufactured in a rectangular form measuring 4 × 2 × 2 mm. Samples fabricated by a conventional casting technique (Group I) and prefabricated milling blanks (Group II) were examined as conventional technique groups. The DMLS samples were randomly divided into three groups as not annealed (Group III), annealed in argon atmosphere (Group IV), or annealed in oxygen atmosphere (Group V). The nanostructure was examined with the small-angle X-ray scattering method. The Rockwell hardness test was used to measure the hardness changes in each group, and the means and standard deviations were statistically analyzed by one-way ANOVA for comparison of continuous variables and Tukey's HSD test was used for post hoc analysis. P values of directly affected both the nanostructure and hardness of the Co-Cr alloy. Group III exhibited a non-homogeneous structure and increased hardness (48.16 ± 3.02 HRC) because the annealing process was incomplete and the inner stress was not relieved. Annealing in argon atmosphere of Group IV not only relieved the inner stresses but also decreased the hardness (27.40 ± 3.98 HRC). The results of fitting function presented that Group IV was the most homogeneous product as the minimum bilayer thickness was measured (7.11 Å). After the manufacturing with DMLS technique, annealing in argon atmosphere is an essential process for Co-Cr metal ceramic substructures. The dentists should be familiar with the materials that are used in clinic for prosthodontics treatments.

The Linux command line a complete introduction

CERN Document Server

Shotts, William E

2012-01-01

You've experienced the shiny, point-and-click surface of your Linux computer—now dive below and explore its depths with the power of the command line. The Linux Command Line takes you from your very first terminal keystrokes to writing full programs in Bash, the most popular Linux shell. Along the way you'll learn the timeless skills handed down by generations of gray-bearded, mouse-shunning gurus: file navigation, environment configuration, command chaining, pattern matching with regular expressions, and more.

40 years of Porsche turbo engines. The basis for future innovations; 40 Jahre Porsche Turbomotoren. Basis fuer zukuenftige Innovationen

Energy Technology Data Exchange (ETDEWEB)

Neusser, Heinz-Jakob; Kerkau, Martin; Schwarzenthal, Dietmar; Hemmerlein, Norbert [Dr. Ing. h.c. F. Porsche AG, Weissach (Germany)

2011-07-01

Porsche has been developing turbocharged gasoline engines for road and race vehicles for more than 40 years. Many significant innovations in turbocharging technology have been realised in the development history of the 911 Turbo in particular. With its downsizing concept, this engine remains synonymous with high performance in combination with incomparable fuel efficiency among high performance cars. The basis for future engine concepts with reduced fuel consumption lies in a combination of turbocharging with a reduction in engine displacement and number of cylinders. All necessary and innovative technologies such as Variable Turbine Geometry (VTG), Direct Fuel Injection (DFI) and the variable valve timing system VarioCam Plus {sup registered} are already realised in Porsche production engines and impressively demonstrate the potential of modern turbo engines. The light TiAl turbine wheel that will be implemented in the Porsche Panamera represents the latest innovation for further improvement in the throttle response. This set of technologies makes it possible to solve the conflict of goals between high performance and low fuel consumption. (orig.)

Three astronauts inside Command Module Simulator during Apollo Simulation

Science.gov (United States)

1968-01-01

Three astronauts inside the Command Module Simulator in bldg 5 during an Apollo Simulation. Left to right are Astronauts Thomas P. Stafford, commander; John W. Young, command module pilot; and Eugene A. Cernan, lunar module pilot.

Operational Maneuver from the Sea and Amphibious Command Relationships: Is It time for a Joint Force Amphibious Component Commander?

National Research Council Canada - National Science Library

Bennett, Michael

2004-01-01

.... In a joint community that is becoming increasingly dependant on the use of functional component commanders in the execution of major operations, the need for a Joint Force Amphibious Component Commander (JFAMCC...

Unit Testing for Command and Control Systems

Science.gov (United States)

Alexander, Joshua

2018-01-01

Unit tests were created to evaluate the functionality of a Data Generation and Publication tool for a command and control system. These unit tests are developed to constantly evaluate the tool and ensure it functions properly as the command and control system grows in size and scope. Unit tests are a crucial part of testing any software project and are especially instrumental in the development of a command and control system. They save resources, time and costs associated with testing, and catch issues before they become increasingly difficult and costly. The unit tests produced for the Data Generation and Publication tool to be used in a command and control system assure the users and stakeholders of its functionality and offer assurances which are vital in the launching of spacecraft safely.

Command Disaggregation Attack and Mitigation in Industrial Internet of Things

Directory of Open Access Journals (Sweden)

Peng Xun

2017-10-01

Full Text Available A cyber-physical attack in the industrial Internet of Things can cause severe damage to physical system. In this paper, we focus on the command disaggregation attack, wherein attackers modify disaggregated commands by intruding command aggregators like programmable logic controllers, and then maliciously manipulate the physical process. It is necessary to investigate these attacks, analyze their impact on the physical process, and seek effective detection mechanisms. We depict two different types of command disaggregation attack modes: (1 the command sequence is disordered and (2 disaggregated sub-commands are allocated to wrong actuators. We describe three attack models to implement these modes with going undetected by existing detection methods. A novel and effective framework is provided to detect command disaggregation attacks. The framework utilizes the correlations among two-tier command sequences, including commands from the output of central controller and sub-commands from the input of actuators, to detect attacks before disruptions occur. We have designed components of the framework and explain how to mine and use these correlations to detect attacks. We present two case studies to validate different levels of impact from various attack models and the effectiveness of the detection framework. Finally, we discuss how to enhance the detection framework.

Command Disaggregation Attack and Mitigation in Industrial Internet of Things.

Science.gov (United States)

Xun, Peng; Zhu, Pei-Dong; Hu, Yi-Fan; Cui, Peng-Shuai; Zhang, Yan

2017-10-21

A cyber-physical attack in the industrial Internet of Things can cause severe damage to physical system. In this paper, we focus on the command disaggregation attack, wherein attackers modify disaggregated commands by intruding command aggregators like programmable logic controllers, and then maliciously manipulate the physical process. It is necessary to investigate these attacks, analyze their impact on the physical process, and seek effective detection mechanisms. We depict two different types of command disaggregation attack modes: (1) the command sequence is disordered and (2) disaggregated sub-commands are allocated to wrong actuators. We describe three attack models to implement these modes with going undetected by existing detection methods. A novel and effective framework is provided to detect command disaggregation attacks. The framework utilizes the correlations among two-tier command sequences, including commands from the output of central controller and sub-commands from the input of actuators, to detect attacks before disruptions occur. We have designed components of the framework and explain how to mine and use these correlations to detect attacks. We present two case studies to validate different levels of impact from various attack models and the effectiveness of the detection framework. Finally, we discuss how to enhance the detection framework.

Ber analysis of iterative turbo encoded miso wireless communication system under implementation of q-ostbc scheme

OpenAIRE

Kabir, M. Hasnat; Ullah, Shaikh Enayet; Zaman, Mustari; Rashed, Md. Golam

2012-01-01

In this paper, a comprehensive study has been made to evaluate the performance of a MISO wireless communication system. The 4-by-1 spatially multiplexed Turbo encoded system under investigation incorporates Quasi-orthogonal space-time block coding (Q-STBC) and ML signal detection schemes under QPSK, QAM, 16PSK and 16QAM digital modulations. The simulation results elucidate that a significant improvement of system performance is achieved in QAM modulation. The results are also indicative of no...

Ready...Set... Command! Rethinking Training for Squadron Commanders

Science.gov (United States)

2016-02-16

commander faces many difficult challenges. When discussing the Air Force’s troubling trend in suicide rates, Airmen “blame being overworked ...Air Forces total suicides despite making up only 16 percent of the service.3 Three years later the Air Force Times reveals continued challenges in...23 challenges. They must address complex issues facing the Air Force, such as troubling suicide rates, manning shortfalls, decreasing resources

Advantages of variable-speed operation of hydraulic turbo-engines; Vorteile durch den drehzahlvariablen Betrieb von hydraulischen Stroemungsmaschinen

Energy Technology Data Exchange (ETDEWEB)

Harbort, T. [Stuttgart Univ. (Germany). Inst. fuer Stroemungsmechanik und Hydraulische Stroemungsmaschinen

1997-12-31

The performance of current hydraulic turbo-engines in the variable speed sector is monitored and judged. The study covers radial and axial engines as well as Pelton turbines. Variable-speed operation of hydraulic turbo-engines can be realized by means of different combinations of electrical rotating machines and frequency converters. The operating range of the frequency converter plays an important role in the optimization of performance and is taken into account. The smoothness of run of reaction turbines and their cavitation performance can be enhanced by speed regulation. But above all, efficiency is more or less substantially enhanced during partial load or in the case of greatly varying heights of drop. The latter holds true also of Pelton turbines. (orig.) [Deutsch] Das Betriebsverhalten der gaengigen hydraulischen Stroemungsmaschinen wird in Hinblick auf den drehzahlvariablen Betrieb erfasst und beurteilt. Die Untersuchung erfolgt fuer Radialmaschinen, Axialmaschinen und Peltonturbinen. Der drehzahlvariable Betrieb hydraulischer Stroemungsmaschinen kann mit verschiedenen Kombinationen von elektrischen Maschinen und Frequenzumrichtern realisiert werden. Der Arbeitsbereich des Frequenzumrichters spielt eine wichtige Rolle fuer die Optimierung des Betriebsverhaltens und wird beruecksichtigt. Bei Ueberdruckturbinen kann man durch Drehzahlregelung eine groessere Laufruhe sowie ein guenstigeres Kavitationsverhalten erreichen. Vor allem aber sind im Teillastbereich oder bei stark schwankenden Fallhoehen mehr oder weniger grosse Wirkungsgradgewinne erzielbar. Das letztere gilt auch fuer Peltonturbinen. (orig.)

Design and Prototyping Flow of Flexible and Efficient NISC-Based Architectures for MIMO Turbo Equalization and Demapping

Directory of Open Access Journals (Sweden)

Mostafa Rizk

2016-08-01

Full Text Available In the domain of digital wireless communication, flexible design implementations are increasingly explored for different applications in order to cope with diverse system configurations imposed by the emerging wireless communication standards. In fact, shrinking the design time to meet market pressure, on the one hand, and adding the emerging flexibility requirement and, hence, increasing system complexity, on the other hand, require a productive design approach that also ensures final design quality. The no instruction set computer (NISC approach fulfills these design requirements by eliminating the instruction set overhead. The approach offers static scheduling of the datapath, automated register transfer language (RTLsynthesis and allows the designer to have direct control of hardware resources. This paper presents a complete NISC-based design and prototype flow, from architecture specification till FPGA implementation. The proposed design and prototype flow is illustrated through two case studies of flexible implementations, which are dedicated to low-complexity MIMO turbo-equalizer and a universal turbo-demapper. Moreover, the flexibility of the proposed prototypes allows supporting all communication modes defined in the emerging wireless communication standards, such LTE, LTE-Advanced, WiMAX, WiFi and DVB-RCS. For each prototype, its functionality is evaluated, and the resultant performance is verified for all system configurations.

New Turbo Compound Systems in Automotive Industry for Internal Combustion Engine to Recover Energy

Science.gov (United States)

Chiriac, R.; Chiru, A.; Condrea, O.

2017-10-01

The large amount of heat is scattered in the internal combustion engine through exhaust gas, coolant, convective and radiant heat transfer. Of all these residual heat sources, exhaust gases have the potential to recover using various modern heat recovery techniques. Waste heat recovery from an engine could directly reduce fuel consumption, increase available electrical power and improve overall system efficiency and if it would be used a turbochargers that can also produce energy. This solution is called turbo aggregation and has other ways to develop it in other areas of research like the electrical field. [1-3

Engagement Skills Trainer: The Commander’s Perspective

Science.gov (United States)

2017-06-09

CBRN Chemical Biological Radiological and Nuclear CGSOC Command and General Staff Officers Course DMG Digital Master Gunner EST Engagement Skills...commanders always emphasized SHARP ( Sexual Harassment and Response Program) training, the battery commander may vividly recall those events but not the range...soldiers in the EST generally do worse at weapons safety and orientation .26 Indicators from research show that EST results predict live fire results. The

XTCE. XML Telemetry and Command Exchange Tutorial

Science.gov (United States)

Rice, Kevin; Kizzort, Brad; Simon, Jerry

2010-01-01

An XML Telemetry Command Exchange (XTCE) tutoral oriented towards packets or minor frames is shown. The contents include: 1) The Basics; 2) Describing Telemetry; 3) Describing the Telemetry Format; 4) Commanding; 5) Forgotten Elements; 6) Implementing XTCE; and 7) GovSat.

Doublet III neutral beam multi-stream command language system

International Nuclear Information System (INIS)

Campbell, L.; Garcia, J.R.

1983-01-01

A multi-stream command language system was developed to provide control of the dual source neutral beam injectors on the Doublet III experiment at GA Technologies Inc. The Neutral Beam command language system consists of three parts: compiler, sequencer, and interactive task. The command language, which was derived from the Doublet III tokamak command language, POPS, is compiled, using a recursive descent compiler, into reverse polish notation instructions which then can be executed by the sequencer task. The interactive task accepts operator commands via a keyboard. The interactive task directs the operation of three input streams, creating commands which are then executed by the sequencer. The streams correspond to the two sources within a Doublet III neutral beam, plus an interactive stream. The sequencer multiplexes the execution of instructions from these three streams. The instructions include reads and writes to an operator terminal, arithmetic computations, intrinsic functions such as CAMAC input and output, and logical instructions. The neutral beam command language system was implemented using Modular Computer Systems (ModComp) Pascal and consists of two tasks running on a ModComp Classic IV computer. The two tasks, the interactive and the sequencer, run independently and communicate using shared memory regions. The compiler runs as an overlay to the interactive task when so directed by operator commands. The system is succesfully being used to operate the three neutral beams on Doublet III

Doublet III neutral beam multi-stream command language system

International Nuclear Information System (INIS)

Campbell, L.; Garcia, J.R.

1983-12-01

A multi-stream command language system was developed to provide control of the dual source neutral beam injectors on the Doublet III experiment at GA Technologies Inc. The Neutral Beam command language system consists of three parts: compiler, sequencer, and interactive task. The command language, which was derived from the Doublet III tokamak command language, POPS, is compiled, using a recursive descent compiler, into reverse polish notation instructions which then can be executed by the sequencer task. The interactive task accepts operator commands via a keyboard. The interactive task directs the operation of three input streams, creating commands which are then executed by the sequencer. The streams correspond to the two sources within a Doublet III neutral beam, plus an interactive stream. The sequencer multiplexes the execution of instructions from these three streams. The instructions include reads and writes to an operator terminal, arithmetic computations, intrinsic functions such as CAMAC input and output, and logical instructions. The neutral beam command language system was implemented using Modular Computer Systems (ModComp) Pascal and consists of two tasks running on a ModComp Classic IV computer

Turn-based gaming for convoy commander training

NARCIS (Netherlands)

Boonekamp, R.C.; Muller, T.J.; Vrijer, J.C. de

2015-01-01

With the increasing complexity of current-day military operations, effective education and training of military commanders is of vital importance. Commanders need to perform within a broader range of conflicts; unpredictable threats and civil-military interaction place a great demand on their

Robotic end-effector for rewaterproofing shuttle tiles

Science.gov (United States)

Manouchehri, Davoud; Hansen, Joseph M.; Wu, Cheng M.; Yamamoto, Brian S.; Graham, Todd

1992-11-01

This paper summarizes work by Rockwell International's Space Systems Division's Robotics Group at Downey, California. The work is part of a NASA-led team effort to automate Space Shuttle rewaterproofing in the Orbiter Processing Facility at the Kennedy Space Center and the ferry facility at the Ames-Dryden Flight Research Facility. Rockwell's effort focuses on the rewaterproofing end-effector, whose function is to inject hazardous dimethylethyloxysilane into thousands of ceramic tiles on the underside of the orbiter after each flight. The paper has five sections. First, it presents background on the present manual process. Second, end-effector requirements are presented, including safety and interface control. Third, a design is presented for the five end-effector systems: positioning, delivery, containment, data management, and command and control. Fourth, end-effector testing and integrating to the total system are described. Lastly, future applications for this technology are discussed.

Apollo 16 astronauts in Apollo Command Module Mission Simulator

Science.gov (United States)

1972-01-01

Astronaut Thomas K. Mattingly II, command module pilot of the Apollo 16 lunar landing mission, participates in extravehicular activity (EVA) training in bldg 5 at the Manned Spacecraft Center (MSC). In the right background is Astronaut Charles M. Duke Jr., lunar module pilot. They are inside the Apollo Command Module Mission Simulator (31046); Mattingly (right foreground) and Duke (right backgroung) in the Apollo Command Module Mission Simulator for EVA simulation and training. Astronaut John W. Young, commander, can be seen in the left background (31047).

Linux Command Line and Shell Scripting Bible

CERN Document Server

Blum, Richard

2011-01-01

The authoritative guide to Linux command line and shell scripting?completely updated and revised [it's not a guide to Linux as a whole ? just to scripting] The Linux command line allows you to type specific Linux commands directly to the system so that you can easily manipulate files and query system resources, thereby permitting you to automate commonly used functions and even schedule those programs to run automatically. This new edition is packed with new and revised content, reflecting the many changes to new Linux versions, including coverage of alternative shells to the default bash shel

Toward Unity of Command for Multinational Air Forces

National Research Council Canada - National Science Library

Asjes, David

1998-01-01

To assure unity of command in future multinational air operations, combatant commanders must embrace the necessity of multinational air forces, maximize the integration of allied officers within air...

Defense or Diplomacy Geographic Combatant Commands

Science.gov (United States)

2011-06-01

originally ruled by 1 Priest, Dana , The Mission: Waging War and Keeping Peace with America’s Military...events. US Central Command. Dana Priest describes General Zinni‟s experience as a GCC commander, wherein General Zinni found that in many ways...ignored altogether. Dr. James Forsyth and Lt Col Chance Saltzman make this argument in their Air and Space Power Journal article “Stay Out —Why

Unity of Command in Afghanistan: A Forsaken Principle of War

National Research Council Canada - National Science Library

Hope, Ian

2008-01-01

... in the evolution of military command for Afghanistan. It examines how there was an unprecedented departure from the principle of unity of command in Afghanistan in 2006, when Combined Forces Command-Afghanistan (CFC...

Spacecraft command and control using expert systems

Science.gov (United States)

Norcross, Scott; Grieser, William H.

1994-01-01

This paper describes a product called the Intelligent Mission Toolkit (IMT), which was created to meet the changing demands of the spacecraft command and control market. IMT is a command and control system built upon an expert system. Its primary functions are to send commands to the spacecraft and process telemetry data received from the spacecraft. It also controls the ground equipment used to support the system, such as encryption gear, and telemetry front-end equipment. Add-on modules allow IMT to control antennas and antenna interface equipment. The design philosophy for IMT is to utilize available commercial products wherever possible. IMT utilizes Gensym's G2 Real-time Expert System as the core of the system. G2 is responsible for overall system control, spacecraft commanding control, and spacecraft telemetry analysis and display. Other commercial products incorporated into IMT include the SYBASE relational database management system and Loral Test and Integration Systems' System 500 for telemetry front-end processing.

ASC Addresses Unit Commanders' Concerns through LBE and Reset Programs

National Research Council Canada - National Science Library

Young, Mark E

2008-01-01

.... Army Sustainment Command (ASC), part of the U.S. Army Materiel Command (AMC) team, is available to assist, identify, and resolve equipment and maintenance problems as well as materiel readiness issues for combatant commanders...

Maritime Coalitions: When is Unity of Command Required

National Research Council Canada - National Science Library

Gahlinger, Gregory J

2007-01-01

.... The concepts of Unity of Command, Unity of Effort and Parallel, Lead Nation, or Integrated coalition command structures are viable across a broad spectrum of maritime coalition operations but do have...

Unity of Command in Afghanistan: A Forsaken Principle of War

National Research Council Canada - National Science Library

Hope, Ian

2008-01-01

... of military command for Afghanistan. It examines the unprecedented departure from the principle of unity of command in Afghanistan in 2006, when Combined Forces Command-Afghanistan passed control of the ground fight to the International...

An Advanced Commanding and Telemetry System

Science.gov (United States)

Hill, Maxwell G. G.

The Loral Instrumentation System 500 configured as an Advanced Commanding and Telemetry System (ACTS) supports the acquisition of multiple telemetry downlink streams, and simultaneously supports multiple uplink command streams for today's satellite vehicles. By using industry and federal standards, the system is able to support, without relying on a host computer, a true distributed dataflow architecture that is complemented by state-of-the-art RISC-based workstations and file servers.

Astronaut John Young in Command Module Simulator during Apollo Simulation

Science.gov (United States)

1968-01-01

Astronaut John W. Young, command module pilot, inside the Command Module Simulator in bldg 5 during an Apollo Simulation. Astronauts Thomas P. Stafford, commander and Eugene A. Cernan, lunar module pilot are out of the view.

Post-remedial-action survey report for Kinetic Experiment Water Boiler Reactor Facility, Santa Susana Field Laboratories, Rockwell International, Ventura County, California

International Nuclear Information System (INIS)

Wynveen, R.A.; Smith, W.H.; Sholeen, C.M.; Flynn, K.F.; Justus, A.L.

1981-10-01

Rockwell International's Santa Susana Laboratories in Ventura County, California, have been the site of numerous federally-funded contracted projects involving the use of radioactive materials. Among these was the Kinetics Experiment Water Boiler (KEWB) Reactor which was operated under the auspices of the US Atomic Energy Commission (AEC). The KEWB Reactor was last operated in 1966. The facility was subsequently declared excess and decontamination and decommissioning operations were conducted during the first half of calendar year 1975. The facility was completely dismantled and the site graded to blend with the surrounding terrain. During October 1981, a post-remedial-action (certification) survey of the KEWB site was conducted on the behalf of the US Department of Energy by the Radiological Survey Group (RSG) of the Occupational Health and Safety Division's Health Physics Section (OHS/HP) of Argonne National Laboratory (ANL). The survey confirmed that the site was free from contamination and could be released for unrestricted use

Command Home Page

Science.gov (United States)

Inclusion And Diversity Navy Standard Integrated Personnel System (NSIPS) My Navy Portal Board of One Source USA.gov U.S. Office of Special Counsel Social Media Directory and Policy US Navy App Locker Navy Personnel Command (NPC) Navy SAPR Navy EEO Inclusion And Diversity Navy Standard Integrated

Comparison between a classical command law and a new advanced recovery command law in a MCB-ARS boost

Science.gov (United States)

Petit, Pierre; Saint-Eve, Frédéric; Sawicki, Jean-Paul; Aillerie, Michel

2017-02-01

This paper focuses on an original performed command on DC-DC boosts developed for applications in the LMOPS lab for the photovoltaic energy conversion and more specifically the Photovoltaic panels connected to HVDC smart grids. This boost, commonly named MCB-ARS (Magnetically Coupled Boost with Active Recovery Switch) presents great advantages concerning the simplicity of the command on the single constitutive switch, the global efficiency and the voltage conversion ratio. A fine analysis of the losses all over the entire converter shows that losses are not distributed uniformly in the constituting components. So a previous modification described in a previous paper consisting in the conducting assistance on the power flowing intermediate diode, performed advantageously the global efficiency. The present analysis takes into account the fact that the new configuration obtained after this important improvement looks like a classical half-bridge push-pull stage and may be controlled by a twice complementary command. In that way, a comparison has been done between a natural commutation recovery diode and an assisted switch commutation driven in a push-pull mode. As attempted, the switching command laws in charge to assume the energy transfer has been compared to the classical previous system described in anterior papers, and we demonstrate in this publication that a commutation based on a push-pull command mode within the two switches of the MCB-ARS converter is possible and increases the power transfer.

The Evidence of Imposex in Turbo sp. from Ujungpiring Waters of Jepara

Science.gov (United States)

Nuraini, RAT; Hartati, R.; Endrawati, H.; Widianingsih; Rachma, MJ; Mahendrajaya, RT

2018-02-01

Imposex is an endocrine disruption syndrome, in which females of marine gastropods develop sexual characteristics of males (penis and/or vas deferens). This syndrome is caused by tributyltin (TBT) or triphenyltin (TPT), toxic organotin compounds found in naval paints used as antifouling system in boats and artificial structures. The main objective of this study was to assess the incidence and severity of imposex in Turbosp.A hundred individus of Turbo sp was collected from Ujung Piring waters of Jepara, and observed for their sex and imposex. The results showed that the ratio male and female was 1.13 : 1, and the frequency of imposex females was 64.58%. The relative penis size were longer in imposex female than in male. The possibility of pollution was clearly shown from high evidence of imposex female.

Evaluation of large girth LDPC codes for PMD compensation by turbo equalization.

Science.gov (United States)

Minkov, Lyubomir L; Djordjevic, Ivan B; Xu, Lei; Wang, Ting; Kueppers, Franko

2008-08-18

Large-girth quasi-cyclic LDPC codes have been experimentally evaluated for use in PMD compensation by turbo equalization for a 10 Gb/s NRZ optical transmission system, and observing one sample per bit. Net effective coding gain improvement for girth-10, rate 0.906 code of length 11936 over maximum a posteriori probability (MAP) detector for differential group delay of 125 ps is 6.25 dB at BER of 10(-6). Girth-10 LDPC code of rate 0.8 outperforms the girth-10 code of rate 0.906 by 2.75 dB, and provides the net effective coding gain improvement of 9 dB at the same BER. It is experimentally determined that girth-10 LDPC codes of length around 15000 approach channel capacity limit within 1.25 dB.

Reticulospinal Systems for Tuning Motor Commands

Directory of Open Access Journals (Sweden)

Robert M. Brownstone

2018-04-01

Full Text Available The pontomedullary reticular formation (RF is a key site responsible for integrating descending instructions to execute particular movements. The indiscrete nature of this region has led not only to some inconsistencies in nomenclature, but also to difficulties in understanding its role in the control of movement. In this review article, we first discuss nomenclature of the RF, and then examine the reticulospinal motor command system through evolution. These command neurons have direct monosynaptic connections with spinal interneurons and motoneurons. We next review their roles in postural adjustments, walking and sleep atonia, discussing their roles in movement activation or inhibition. We propose that knowledge of the internal organization of the RF is necessary to understand how the nervous system tunes motor commands, and that this knowledge will underlie strategies for motor functional recovery following neurological injuries or diseases.

Improved imaging of cochlear nerve hypoplasia using a 3-Tesla variable flip-angle turbo spin-echo sequence and a 7-cm surface coil.

Science.gov (United States)

Giesemann, Anja M; Raab, Peter; Lyutenski, Stefan; Dettmer, Sabine; Bültmann, Eva; Frömke, Cornelia; Lenarz, Thomas; Lanfermann, Heinrich; Goetz, Friedrich

2014-03-01

Magnetic resonance imaging of the temporal bone has an important role in decision making with regard to cochlea implantation, especially in children with cochlear nerve deficiency. The purpose of this study was to evaluate the usefulness of the combination of an advanced high-resolution T2-weighted sequence with a surface coil in a 3-Tesla magnetic resonance imaging scanner in cases of suspected cochlear nerve aplasia. Prospective study. Seven patients with cochlear nerve hypoplasia or aplasia were prospectively examined using a high-resolution three-dimensional variable flip-angle turbo spin-echo sequence using a surface coil, and the images were compared with the same sequence in standard resolution using a standard head coil. Three neuroradiologists evaluated the magnetic resonance images independently, rating the visibility of the nerves in diagnosing hypoplasia or aplasia. Eight ears in seven patients with hypoplasia or aplasia of the cochlear nerve were examined. The average age was 2.7 years (range, 9 months-5 years). Seven ears had accompanying malformations. The inter-rater reliability in diagnosing hypoplasia or aplasia was greater using the high-resolution three-dimensional variable flip-angle turbo spin-echo sequence (fixed-marginal kappa: 0.64) than with the same sequence in lower resolution (fixed-marginal kappa: 0.06). Examining cases of suspected cochlear nerve aplasia using the high-resolution three-dimensional variable flip-angle turbo spin-echo sequence in combination with a surface coil shows significant improvement over standard methods. © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

Design of a hybrid command and control mobile botnet: Presentation

CSIR Research Space (South Africa)

Pieterse, H

2013-03-01

Full Text Available smartphones controlled by a botmaster through a command and control network to serve a malicious purpose. This study presents the design of a hybrid command and control mobile botnet. It describes the propagation vectors, command and control channels...

The Effect of Flywheel Unbalance on Gear Noise in the Hydraulic Power Plant Turbo-Generator

Directory of Open Access Journals (Sweden)

Tomeh Elias

2017-01-01

Full Text Available The Effect of Flywheel Unbalance on Gear Noise in the Hydraulic Power Plant Turbo-Generator. Hydraulic power plants are systems that produce electrical energy with high investment costs. In order to fulfil their goals, investments should create conditions for a safe production of energy in a long lasting and reliable way, and with the required power and quality. These goals are possible to reach by an optional control process linked to a systematic monitoring of the operating machinery state, using the method of vibration diagnostics. Lately, there has been an increase of noise level in the hydraulic power plants.

Performance Comparisons of Improved Regular Repeat Accumulate (RA and Irregular Repeat Accumulate (IRA Turbo Decoding

Directory of Open Access Journals (Sweden)

Ahmed Abdulkadhim Hamad

2017-08-01

Full Text Available In this paper, different techniques are used to improve the turbo decoding of regular repeat accumulate (RA and irregular repeat accumulate (IRA codes. The adaptive scaling of a-posteriori information produced by Soft-output Viterbi decoder (SOVA is proposed. The encoded pilots are another scheme that applied for short length RA codes. This work also suggests a simple and a fast method to generate a random interleaver having a free 4 cycle Tanner graph. Progressive edge growth algorithm (PEG is also studied and simulated to create the Tanner graphs which have a great girth.

Incorrect Responses to Locative Commands: A Case Study.

Science.gov (United States)

Duchan, Judith; Siegel, Leo

1979-01-01

A six-year-old with a language problem responded consistently to 100 locative commands by putting objects in containers and on flat surfaces regardless of the preposition or order of the nouns in the commands. (Author/CL)

The command to love the neighbour in Paul and the Synoptics

Directory of Open Access Journals (Sweden)

Heinz A. Hiestermann

2016-03-01

Full Text Available When sayings of Jesus are compared between the Pauline letters and the Synoptic Gospels in an attempt to locate parallels, Galatians 5:14 and Romans 13:8�10 have frequently been put forward as possible parallels to the Synoptic renditions of the great commandment of Mark 12:28�34 (Mt 22:34�40; Lk 10:25�28. These Pauline and Synoptic texts all contain the command to love the neighbour, but the Synoptic texts have added the command to love God to the command to love the neighbour. Paul never quoted the great commandment. Consequently, a relationship between the verses is normally rejected. However, not all possibilities have been explored. In the search for parallels between Pauline and Synoptic Jesus traditions it has been overlooked that Paul and Matthew render the command to love the neighbour more than once. Matthew delivers the command to love the neighbour three times. Only once he has connected it to the command to love God. Matthew renders the single command to love the neighbour twice, resembling the Pauline use of the command. Using the criteria for validating parallels between Pauline and Synoptic Jesus traditions, including verbal agreement and the unique use of the command to love the neighbour by Paul and Matthew, it is argued that a connection between Romans 13:9 and Matthew 19:18�19 is likely.Intradisciplinary and/or interdisciplinary implications: The research explores the use of Leviticus 19:18b by the New Testament authors. It is argued that the command to love the neighbour was given high prominence in the early church, as it was used by the Synoptic authors and by Paul to summarise Jesus� ethical teachings.

PERCEIVED IMPACT OF THE YOUTH ENTERPRISE DEVELOPMENT FUND ON THE YOUTH TOWARDS THE ESTABLISHMENT OF SMALL SCALE RURAL ENTERPRISES IN TURBO DIVISION, UASIN-GISHU COUNTY, KENYA

Directory of Open Access Journals (Sweden)

Jasper E Nyaura

2017-02-01

Full Text Available The inception of the Youth Enterprise Development Fund has seen the rise of youth groups in rural areas. This paper is thus aimed at understanding the impact of the fund towards the youth establishment of small scale enterprises in Turbo Division. A descriptive research design was used in this paper. Data was collected using focused group discussion and self-administered questionnaires thus they were administered to the selected youth groups found in selected parts of the Turbo Division. Purposive technique was used in the specific youth of aged bracket 18 year to 35 years. Further, purposive and stratified sampling techniques were used in targeted youth groups. The sample size used was 147 drawn from Turbo Division. The salient findings of the study are that indeed the youth joined the small scale enterprises to obtain benefits through collaborative efforts, to gain and obtain skills and experiences, obtaining start-up capital and finally due to the unemployment. Moreover, impact made by the fund on individual life included; promoting togetherness, promoting income and sustained livelihoods thus improved economic statues, and eventually enhanced skills and experience that led to acquiring of more skills by joining polytechnics. Furthermore the fund had enhanced group development and participation. It is recommended that there should be enhanced youth group sustainability towards proper utilization of the fund.

COMMAND-AND-CONTROL AND MANAGEMENT DECISION MAKING,

Science.gov (United States)

Reports that the development of command-and-con trol systems in support of decision making and action taking has been accomplished by military...methods applicable to management systems. Concludes that the command-and-control type system for top management decision making is a man-machine system having as its core an on going, dynamic operation. (Author)

THE PARTICULARITIES OF THE COST CALCULATION METHOD ON COMMANDS IN FURNITURE INDUSTRY

Directory of Open Access Journals (Sweden)

Felicia Sabou

2014-10-01

Full Text Available The paper present the importance of the method on commands in cost calculation and the particularities of the cost calculation method on commands in the furniture industry. This paper presents a hypotetical study on the method on commands, considering the observations made during 2013-2014, on how it is organized and managed accounts management using method on commands.By presenting this hypothetical model about the accounting in management accounting using the method on commands, the paper contributes to the correct application of this method in practice, specifically in management accounting in companies from the furniture industry. In my opinion the method on commands is an appropriate method for achieving management accounting for companies that have as main activity the production of furniture. When applying the method on commands in cost calculation and in management accounting, the companies must to consider the particularities of the cost calculation, in the furniture industry, like: technical and economic factors from this sector, the technical details of each command, the codification of the commands, planning materials and labor costs for each command, monitoring and recording production costs, registration of the direct costs, distribution of the indirect costs on commands, registration of the indirect costs and registration in management accounting.

SOA approach to battle command: simulation interoperability

Science.gov (United States)

Mayott, Gregory; Self, Mid; Miller, Gordon J.; McDonnell, Joseph S.

2010-04-01

NVESD is developing a Sensor Data and Management Services (SDMS) Service Oriented Architecture (SOA) that provides an innovative approach to achieve seamless application functionality across simulation and battle command systems. In 2010, CERDEC will conduct a SDMS Battle Command demonstration that will highlight the SDMS SOA capability to couple simulation applications to existing Battle Command systems. The demonstration will leverage RDECOM MATREX simulation tools and TRADOC Maneuver Support Battle Laboratory Virtual Base Defense Operations Center facilities. The battle command systems are those specific to the operation of a base defense operations center in support of force protection missions. The SDMS SOA consists of four components that will be discussed. An Asset Management Service (AMS) will automatically discover the existence, state, and interface definition required to interact with a named asset (sensor or a sensor platform, a process such as level-1 fusion, or an interface to a sensor or other network endpoint). A Streaming Video Service (SVS) will automatically discover the existence, state, and interfaces required to interact with a named video stream, and abstract the consumers of the video stream from the originating device. A Task Manager Service (TMS) will be used to automatically discover the existence of a named mission task, and will interpret, translate and transmit a mission command for the blue force unit(s) described in a mission order. JC3IEDM data objects, and software development kit (SDK), will be utilized as the basic data object definition for implemented web services.

ITOUGH2 command reference. Version 3.1

International Nuclear Information System (INIS)

Finsterle, S.

1997-04-01

This report contains a detailed description of all ITOUGH2 commands. It complements the ITOUGH2 User's Guide and the collection of ITOUGH2 sample problems. ITOUGH2 is a program for parameter estimation, sensitivity analysis, and uncertainty propagation analysis. It is based on the TOUGH2 simulator for non-isothermal multiphase flow in fractured and porous media. Extensive experience in using TOUGH2 is a prerequisite for using ITOUGH2. The preparation of an input file for TOUGH2 or its derivatives is described in separate manuals and is not part of this report. The ITOUGH2 user's guide summarizes the inverse modeling theory pertaining to ITOUGH2, and describes the program output. Furthermore, information about code architecture and installation are given. In Chapter 2 of this report, a brief summary of inverse modeling theory is given to restate the main concepts implemented in ITOUGH2 and to introduce certain definitions. Chapter 3 introduces the basic concepts of the ITHOUGH2 input language and the main structure of an ITOUGH2 input file. Chapter 4, the main part of this report, provides detailed descriptions of each ITOUGH2 command in alphabetical order. It is complemented by a command index in Appendix B in which the commands are given in logical order. The content of Chapter 4 is also available on-line using command it2help. Chapter 5 describes the usage of the UNIX script files for executing, checking, and terminating ITOUGH2 simulations

Intelligent Tutoring System for Teaching Battlefield Command Reasoning Skills

National Research Council Canada - National Science Library

Domeshek, Eric

2002-01-01

.... Achieving expert levels of proficiency in high-level command reasoning skills-whether for battlefield commanders or for executives in industry-requires extensive practice, coaching, and feedback...

The Mac'OS X command line Unix under the hood

CERN Document Server

McElhearn, Kirk

2006-01-01

The Mac command line offers a faster, easier way to accomplish many tasks. It''s also the medium for many commands that aren''t accessible using the GUI. The Mac OS X Command Line is a clear, concise, tutorial-style introduction to all the major functionality provided by the command line. It''s also packed with information the experienced users need, including little-known shortcuts and several chapters devoted to advanced topics. This is a book to get you started, but also a book you won't soon outgrow.

Command Structure for Theater Warfare: The Quest for Unity of Command

Science.gov (United States)

1984-09-01

that trryfari tail forth thr htst from iti—Btturki Major General« Pern M Smith. USAF. and Hark) A Hughe«. USAF. contributed more to the rndertaking...an air. ground, and sea component. These arc generic commands which control all combat operations in the media of the air. ground, and sea. There

32 CFR 809a.10 - Military commanders' responsibilities.

Science.gov (United States)

2010-07-01

... authorities as soon as possible. (c) Military forces will ordinarily exercise police powers previously... 32 National Defense 6 2010-07-01 2010-07-01 false Military commanders' responsibilities. 809a.10... Disturbance Intervention and Disaster Assistance § 809a.10 Military commanders' responsibilities. (a...

Multiobjective Design of Turbo Injection Mode for Axial Flux Motor in Plastic Injection Molding Machine by Particle Swarm Optimization

Directory of Open Access Journals (Sweden)

Jian-Long Kuo

2015-01-01

Full Text Available This paper proposes a turbo injection mode (TIM for an axial flux motor to apply onto injection molding machine. Since the injection molding machine requires different speed and force parameters setting when finishing a complete injection process. The interleaved winding structure in the motor provides two different injection levels to provide enough injection forces. Two wye-wye windings are designed to switch two control modes conveniently. Wye-wye configuration is used to switch two force levels for the motor. When only one set of wye-winding is energized, field weakening function is achieved. Both of the torque and speed increase under field weakening operation. To achieve two control objectives for torque and speed of the motor, fuzzy based multiple performance characteristics index (MPCI with particle swarm optimization (PSO is used to find out the multiobjective optimal design solution. Both of the torque and speed are expected to be maximal at the same time. Three control factors are selected as studied factors: winding diameter, winding type, and air-gap. Experimental results show that both of the torque and speed increase under the optimal condition. This will provide enough large torque and speed to perform the turbo injection mode in injection process for the injection molding machine.

Control of fast non linear systems - application to a turbo charged SI engine with variable valve timing; controle des systemes rapides non lineaires - application au moteur a allumage commande turbocompresse a distribution variable

Energy Technology Data Exchange (ETDEWEB)

Colin, G.

2006-10-15

Spark ignition engine control has become a major issue for the compliance with emissions legislation while ensuring driving comfort. Engine down-sizing is one of the promising ways to reduce fuel consumption and resulting CO{sub 2} emissions. Combining several existing technologies such as supercharging and variable valve actuation, down-sizing is a typical example of the problems encountered in Spark Ignited (SI) engine control: nonlinear systems with saturation of actuators; numerous major physical phenomena not measurable; limited computing time; control objectives (consumption, pollution, performance) often competing. A methodology of modelling and model-based control (internal model and predictive control) for these systems is also proposed and applied to the air path of the down-sized engine. Models, physicals and generics, are built to estimate in-cylinder air mass, residual burned gases mass and air scavenged mass from the intake to the exhaust. The complete and generic engine torque control architecture for the turbo-charged SI engine with variable cam-shaft timing was tested in simulation and experimentally (on engine and vehicle). These tests show that new possibilities are offered in order to decrease pollutant emissions and optimize engine efficiency. (author)

106-17 Telemetry Standards Recorder and Reproducer Command and Control Chapter 6

Science.gov (United States)

2017-07-01

block identifiers (any ASCII text , one identifier per line) from the drive. A .BBLIST command is only valid following a declassify command. The type ... Processor Device Using IEEE 1394b ..... 6-49 6.5.6 Additional Mandatory Commands When Using Ethernet ........................... 6-54 6.5.7 Additional Non...state or magnetic disk). Not all commands (CLI or discrete) may be applicable to all types of R/R implementations. Commands are used to a) control the

Communication for command and control systems

CERN Document Server

Morris, D J

1983-01-01

Communication for Command and Control Systems provides a thorough exposition of the basic theoretical and practical features involved in the design of communication networks for command and control systems. This book focuses primarily on the practical side of computer-controlled communication. This text concentrates on the communication sides of the subject by surveying the means of transferring data between the various processing points and by appraising their potential advantages and possible defects in implementation. In this respect, this book should prove useful for the practicing enginee

Development and Validation of Nigerian Army Commanding Officers ...

African Journals Online (AJOL)

The research adopted an ex-post-facto design based on a qualitative and quantitative analysis of data. Focus Group Discussions (FGDs) and In-Depth Interviews (IDIs) were conducted with commanding officers. The FGDs were conducted with officers purposively drawn from incumbent commanding officers in the Nigerian ...

Performance of turbo high-pitch dual-source CT for coronary CT angiography: first ex vivo and patient experience

Energy Technology Data Exchange (ETDEWEB)

Morsbach, Fabian; Gordic, Sonja; Husarik, Daniela; Frauenfelder, Thomas; Alkadhi, Hatem [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland); Desbiolles, Lotus; Leschka, Sebastian [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland); Kantonsspital St. Gallen, Divison of Radiology and Nuclear Medicine, St. Gallen (Switzerland); Schmidt, Bernhard; Allmendinger, Thomas [Siemens AG, Healthcare Sector, Forchheim (Germany); Wildermuth, Simon [Kantonsspital St. Gallen, Divison of Radiology and Nuclear Medicine, St. Gallen (Switzerland)

2014-08-15

To evaluate image quality, maximal heart rate allowing for diagnostic imaging, and radiation dose of turbo high-pitch dual-source coronary computed tomographic angiography (CCTA). First, a cardiac motion phantom simulating heart rates (HRs) from 60-90 bpm in 5-bpm steps was examined on a third-generation dual-source 192-slice CT (prospective ECG-triggering, pitch 3.2; rotation time, 250 ms). Subjective image quality regarding the presence of motion artefacts was interpreted by two readers on a four-point scale (1, excellent; 4, non-diagnostic). Objective image quality was assessed by calculating distortion vectors. Thereafter, 20 consecutive patients (median, 50 years) undergoing clinically indicated CCTA were included. In the phantom study, image quality was rated diagnostic up to the HR75 bpm, with object distortion being 1 mm or less. Distortion increased above 1 mm at HR of 80-90 bpm. Patients had a mean HR of 66 bpm (47-78 bpm). Coronary segments were of diagnostic image quality for all patients with HR up to 73 bpm. Average effective radiation dose in patients was 0.6 ± 0.3 mSv. Our combined phantom and patient study indicates that CCTA with turbo high-pitch third-generation dual-source 192-slice CT can be performed at HR up to 75 bpm while maintaining diagnostic image quality, being associated with an average radiation dose of 0.6 mSv. (orig.)

Performance of turbo high-pitch dual-source CT for coronary CT angiography: first ex vivo and patient experience

International Nuclear Information System (INIS)

Morsbach, Fabian; Gordic, Sonja; Husarik, Daniela; Frauenfelder, Thomas; Alkadhi, Hatem; Desbiolles, Lotus; Leschka, Sebastian; Schmidt, Bernhard; Allmendinger, Thomas; Wildermuth, Simon

2014-01-01

To evaluate image quality, maximal heart rate allowing for diagnostic imaging, and radiation dose of turbo high-pitch dual-source coronary computed tomographic angiography (CCTA). First, a cardiac motion phantom simulating heart rates (HRs) from 60-90 bpm in 5-bpm steps was examined on a third-generation dual-source 192-slice CT (prospective ECG-triggering, pitch 3.2; rotation time, 250 ms). Subjective image quality regarding the presence of motion artefacts was interpreted by two readers on a four-point scale (1, excellent; 4, non-diagnostic). Objective image quality was assessed by calculating distortion vectors. Thereafter, 20 consecutive patients (median, 50 years) undergoing clinically indicated CCTA were included. In the phantom study, image quality was rated diagnostic up to the HR75 bpm, with object distortion being 1 mm or less. Distortion increased above 1 mm at HR of 80-90 bpm. Patients had a mean HR of 66 bpm (47-78 bpm). Coronary segments were of diagnostic image quality for all patients with HR up to 73 bpm. Average effective radiation dose in patients was 0.6 ± 0.3 mSv. Our combined phantom and patient study indicates that CCTA with turbo high-pitch third-generation dual-source 192-slice CT can be performed at HR up to 75 bpm while maintaining diagnostic image quality, being associated with an average radiation dose of 0.6 mSv. (orig.)

Scale-free Enterprise Command & Control

National Research Council Canada - National Science Library

Bayne, Jay; Paul, Raymond

2005-01-01

...) services that provide allied teams of commanders, planners and operations personnel with collaborative, grid-based and realtime situation assessment, plan generation, and plan execution services...

The influence of the engine load on value and temperature distribution in the valve seats of turbo diesel engine

Directory of Open Access Journals (Sweden)

Aleksander HORNIK

2009-01-01

Full Text Available In this paper was presented the numerical computations of the influence of engine load on value and temperature distribution of characteristic surfaces of the heat transfer of the valve seats in Turbo diesel engine at the beginning phase of its work. The computations were performed by means of a two-zone combustion model, the boundary of III kind conditions and the finite elements method (FEM by adaptation of the COSMOS/M program.

Modernization of the turbo in the Laguna Verde Nuclear Power Plant; Modernizacion del turbogrupo en la Central Nuclear de Laguna Verde

Energy Technology Data Exchange (ETDEWEB)

Liebana, B.; Merino, A.; Cobos, A.; Gonzalez, J. J.

2010-07-01

The power increase of the Laguna Verde Nuclear Power Plant is a project for the rehabilitation and modernization of the turbo and associated equipment to get an increase of its power and of its service life. The project scope includes the design, the engineering, the equipment supply, the installation, the testing and the commissioning. This paper describes the first phase of the project.

U.S. Africa Command: Shaping Africa for the Future

National Research Council Canada - National Science Library

Sholley, Hans

2006-01-01

.... It is argued the current Unified Command Plan is ill designed to address the complexities of the continent of Africa and that a proposed United States Africa Command would be better positioned...

14 CFR 417.303 - Command control system requirements.

Science.gov (United States)

2010-01-01

... system must transmit a command signal that has the radio frequency characteristics and power needed for.... (c) Reliability prediction. A command control system must have a predicted reliability of 0.999 at... for each launch. Any demonstration of the system's predicted reliability must satisfy § 417.309(b). (d...

Automatic regulation of the feedwater turbo-pump capacity for the single-turbine 1000 MW NPP unit

International Nuclear Information System (INIS)

Pavlysh, O.N.; Garbuzov, I.P.; Reukov, Yu.N.

1985-01-01

A schematic of the flow regulators (FR) of feedwater turbo-pumps (FTP) for the single-turbine 1000 MW NPP unit is presented. The FR operate in response to feedwoter signals from FTP or in response to FTP rotor rotational speed and control automatic speed governars. The FR automatic regulation ensures limitation of FTP rotor maximum rotational speed at a feedwater flow rate excess equal to 3600 T/h. The transients in the automatic regulation system are considered. Production tests of FTP FR confirmed the FR operation reliability and the right choice of the regulator concept and structure

Computer simulation of the heavy-duty turbo-compounded diesel cycle for studies of engine efficiency and performance

Science.gov (United States)

Assanis, D. N.; Ekchian, J. A.; Heywood, J. B.; Replogle, K. K.

1984-01-01

Reductions in heat loss at appropriate points in the diesel engine which result in substantially increased exhaust enthalpy were shown. The concepts for this increased enthalpy are the turbocharged, turbocompounded diesel engine cycle. A computer simulation of the heavy duty turbocharged turbo-compounded diesel engine system was undertaken. This allows the definition of the tradeoffs which are associated with the introduction of ceramic materials in various parts of the total engine system, and the study of system optimization. The basic assumptions and the mathematical relationships used in the simulation of the model engine are described.

Command vector memory systems: high performance at low cost

OpenAIRE

Corbal San Adrián, Jesús; Espasa Sans, Roger; Valero Cortés, Mateo

1998-01-01

The focus of this paper is on designing both a low cost and high performance, high bandwidth vector memory system that takes advantage of modern commodity SDRAM memory chips. To successfully extract the full bandwidth from SDRAM parts, we propose a new memory system organization based on sending commands to the memory system as opposed to sending individual addresses. A command specifies, in a few bytes, a request for multiple independent memory words. A command is similar to a burst found in...

Indonesian Automatic Speech Recognition For Command Speech Controller Multimedia Player

Directory of Open Access Journals (Sweden)

Vivien Arief Wardhany

2014-12-01

Full Text Available The purpose of multimedia devices development is controlling through voice. Nowdays voice that can be recognized only in English. To overcome the issue, then recognition using Indonesian language model and accousticc model and dictionary. Automatic Speech Recognizier is build using engine CMU Sphinx with modified english language to Indonesian Language database and XBMC used as the multimedia player. The experiment is using 10 volunteers testing items based on 7 commands. The volunteers is classifiedd by the genders, 5 Male & 5 female. 10 samples is taken in each command, continue with each volunteer perform 10 testing command. Each volunteer also have to try all 7 command that already provided. Based on percentage clarification table, the word “Kanan” had the most recognize with percentage 83% while “pilih” is the lowest one. The word which had the most wrong clarification is “kembali” with percentagee 67%, while the word “kanan” is the lowest one. From the result of Recognition Rate by male there are several command such as “Kembali”, “Utama”, “Atas “ and “Bawah” has the low Recognition Rate. Especially for “kembali” cannot be recognized as the command in the female voices but in male voice that command has 4% of RR this is because the command doesn’t have similar word in english near to “kembali” so the system unrecognize the command. Also for the command “Pilih” using the female voice has 80% of RR but for the male voice has only 4% of RR. This problem is mostly because of the different voice characteristic between adult male and female which male has lower voice frequencies (from 85 to 180 Hz than woman (165 to 255 Hz.The result of the experiment showed that each man had different number of recognition rate caused by the difference tone, pronunciation, and speed of speech. For further work needs to be done in order to improving the accouracy of the Indonesian Automatic Speech Recognition system

Irrigation and crop management in Gandak Canal command of India

International Nuclear Information System (INIS)

Singh, S.S.; Khan, A.R.

2002-05-01

The Gandak Project is one of the biggest irrigation projects in India, covering a culturable command area (CCA) of 4.44 lakh ha in U.P., 9.6 lakh ha CCA in Bihar and 0.44 lakh ha in Nepal (Singh and Khan, 2002). The total culturable command areas are 14.44 lakh hectares. The command area is located in between latitude 25 deg 40' to 27 deg 25' and longitude between 83 deg 15' to 85 deg 15'. It is a diversion project through construction of a barrage on the river Gandak. This project area covers up to five districts in the Command of Tirhut Main Canal (TMC) and 3 districts in the Saran Main Canal (SMC) command. The length of main canal is usually long (990 and 650 R.D.'s in eastern and western side, respectively) and the channels are unlined and seepage loss is quite high. (author)

Dynamic Stability Study of Static Gas Bearing for Small Cryogenic Turbo-Expander

International Nuclear Information System (INIS)

Wang Xuemin; Zhuang Ming; Zhang Qiyong; Li Shanshan; Fu Bao

2011-01-01

An experimental method is presented to analyze the dynamic stability of the gas bearing for small cryogenic turbo-expanders. The rotation imbalance response and the shape of the rotor orbit were obtained for different speeds up to 110,000 rpm, and the critical speed of the rotor-bearing system was determined by a Bode diagram. An FFT signal analytical method was applied to identify the resonance frequency, and the waterfall plot was presented. During the whole process of speeding up to the designed speed of 110,000 rpm, the rotor-bearing works stably with no whirl instability, which is validated in a waterfall plot. Also, the tested rotor-bearing model was analyzed theoretically. It was proved that the experimental results were highly consistent with those of theoretical calculations. Thus the experimental method proposed here to analyze the dynamic stability of the gas bearing is feasible. (fusion engineering)

High-Speed Turbo-TCM-Coded Orthogonal Frequency-Division Multiplexing Ultra-Wideband Systems

Directory of Open Access Journals (Sweden)

Wang Yanxia

2006-01-01

Full Text Available One of the UWB proposals in the IEEE P802.15 WPAN project is to use a multiband orthogonal frequency-division multiplexing (OFDM system and punctured convolutional codes for UWB channels supporting a data rate up to 480 Mbps. In this paper, we improve the proposed system using turbo TCM with QAM constellation for higher data rate transmission. We construct a punctured parity-concatenated trellis codes, in which a TCM code is used as the inner code and a simple parity-check code is employed as the outer code. The result shows that the system can offer a much higher spectral efficiency, for example, 1.2 Gbps, which is 2.5 times higher than the proposed system. We identify several essential requirements to achieve the high rate transmission, for example, frequency and time diversity and multilevel error protection. Results are confirmed by density evolution.

Combatant Commanders Informational Series: USPACOM

National Research Council Canada - National Science Library

Comnick, Michael

1996-01-01

...) introducing potential joint staff officers to their specific command. Inbound staff officers, prepared by reviewing this product, arrive on station ready to receive specialized training without needing background indoctrination...

Some problems raised by the operation of large nuclear turbo-generator sets. Solutions proposed for the protection of large size generators

International Nuclear Information System (INIS)

Chaumienne, J.-P.

1976-01-01

The operating requirements of nuclear power stations call for relays with ever increasing performances. This urges the development of new electronic systems while giving high importance to their reliability. So as to provide for easy application and minitoring of the relays, even when the turbo-generator unit is operating, a new cubicle design is considered which offers maximum safety and flexibility in use [fr

Commander manipulator scoops prestigious mulit-million pound BNFL contract

International Nuclear Information System (INIS)

Bailey, Andrew.

1997-01-01

Twenty-one Commander robotic arms are on order from INBIS (formerly Ricardo Hitec) and BNFL Engineering Limited (''BEL'', the engineering arm of parent company BNFL). The multi-million pound contract was won amid fierce competition from other well-known names in robotic engineering. The specially designed Commander manipulators will be engaged in remotely handling Intermediate Level Waste (ILW) in a suite of four BNFL ILW plants, which are currently either under construction or planned at Sellafield. The first Commander will delivered to BNFL's Sellafield Silo Emptying Project in January 1998. (Author)

Design of a hybrid command and control mobile botnet

CSIR Research Space (South Africa)

Pieterse, H

2013-05-01

Full Text Available and control mobile botnet. The hybrid design explores the efficiency of multiple command and control channels against the following objectives: no single point of failure within the topology, low cost for command dissemination, limited network activities...

Warfighter Associate: Decision Aiding and Metrics for Mission Command

Science.gov (United States)

2012-01-23

Distributions: highlights the Pareto Principle -- the top 20% of the mission-command staff is heavily involved in collaborations. • Our...developing “Command Web”, a web service to support thin- client functionality (Intelligent Presentation Services enables this) Thank you

The Influence of Future Command, Control, Communications, and Computers (C4) on Doctrine and the Operational Commander's Decision-Making Process

Science.gov (United States)

Mayer, Michael G.

1996-01-01

Future C4 systems will alter the traditional balance between force and information, having a profound influence on doctrine and the operational commander's decision making process. The Joint Staff's future vision of C4 is conceptualized in 'C4I for the Warrior' which envisions a joint C4I architecture providing timely sensor to shoot information direct to the warfighter. C4 system must manage and filter an overwhelming amount of information; deal with interoperability issues; overcome technological limitations; meet emerging security requirements; and protect against 'Information Warfare.' Severe budget constraints necessitate unified control of C4 systems under singular leadership for the common good of all the services. In addition, acquisition policy and procedures must be revamped to allow new technologies to be fielded quickly; and the commercial marketplace will become the preferred starting point for modernization. Flatter command structures are recommended in this environment where information is available instantaneously. New responsibilities for decision making at lower levels are created. Commanders will have to strike a balance between exerting greater control and allowing subordinates enough flexibility to maintain initiative. Clearly, the commander's intent remains the most important tool in striking this balance.

U.S. Pacific Command > Leadership

Science.gov (United States)

USPACOM U.S. Pacific Command Search USPACOM: Search Search Search USPACOM: Search Home Leadership Directory Media Inquiries Home : Leadership Admiral Harry B. Harris, Jr., U.S. Navy Read the full biography

XTCE: XML Telemetry and Command Exchange Tutorial, XTCE Version 1

Science.gov (United States)

Rice, Kevin; Kizzort, Brad

2008-01-01

These presentation slides are a tutorial on XML Telemetry and Command Exchange (XTCE). The goal of XTCE is to provide an industry standard mechanism for describing telemetry and command streams (particularly from satellites.) it wiill lower cost and increase validation over traditional formats, and support exchange or native format.XCTE is designed to describe bit streams, that are typical of telemetry and command in the historic space domain.

Army Aviation and the Mission Command Warfighting Function

Science.gov (United States)

2017-06-09

information systems , processes and procedures, optimize facilities and equipment, and build understanding of the networks that link the headquarters...however further publication or sale of copyrighted images is not permissible. ii REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188...Command System , Mission Command Information Systems , Training, Mission Training Complex 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT

The R Commander: A Basic-Statistics Graphical User Interface to R

Directory of Open Access Journals (Sweden)

John Fox

2005-08-01

Full Text Available Unlike S-PLUS, R does not incorporate a statistical graphical user interface (GUI, but it does include tools for building GUIs. Based on the tcltk package (which furnishes an interface to the Tcl/Tk GUI toolkit, the Rcmdr package provides a basic-statistics graphical user interface to R called the "R Commander." The design objectives of the R Commander were as follows: to support, through an easy-to-use, extensible, cross-platform GUI, the statistical functionality required for a basic-statistics course (though its current functionality has grown to include support for linear and generalized-linear models, and other more advanced features; to make it relatively difficult to do unreasonable things; and to render visible the relationship between choices made in the GUI and the R commands that they generate. The R Commander uses a simple and familiar menu/dialog-box interface. Top-level menus include File, Edit, Data, Statistics, Graphs, Models, Distributions, Tools, and Help, with the complete menu tree given in the paper. Each dialog box includes a Help button, which leads to a relevant help page. Menu and dialog-box selections generate R commands, which are recorded in a script window and are echoed, along with output, to an output window. The script window also provides the ability to edit, enter, and re-execute commands. Error messages, warnings, and some other information appear in a separate messages window. Data sets in the R Commander are simply R data frames, and can be read from attached packages or imported from files. Although several data frames may reside in memory, only one is "active" at any given time. There may also be an active statistical model (e.g., an R lm or glm ob ject. The purpose of this paper is to introduce and describe the use of the R Commander GUI; to describe the design and development of the R Commander; and to explain how the R Commander GUI can be extended. The second part of the paper (following a brief

Distributed computing environment for Mine Warfare Command

OpenAIRE

Pritchard, Lane L.

1993-01-01

Approved for public release; distribution is unlimited. The Mine Warfare Command in Charleston, South Carolina has been converting its information systems architecture from a centralized mainframe based system to a decentralized network of personal computers over the past several years. This thesis analyzes the progress Of the evolution as of May of 1992. The building blocks of a distributed architecture are discussed in relation to the choices the Mine Warfare Command has made to date. Ar...

Control of automated system with voice commands

OpenAIRE

Švara, Denis

2012-01-01

In smart houses contemporary achievements in the fields of automation, communications, security and artificial intelligence, increase comfort and improve the quality of user's lifes. For the purpose of this thesis we developed a system for managing a smart house with voice commands via smart phone. We focused at voice commands most. We want move from communication with fingers - touches, to a more natural, human relationship - speech. We developed the entire chain of communication, by which t...

Command in the Objective Force

National Research Council Canada - National Science Library

Wilbeck, Christopher

2003-01-01

This paper seeks to answer what type of command will best serve the Army's Objective Force in gaining the initiative, building momentum, and exploiting success to achieve land dominance in the future...

Incident command linkup: the vital key for CBRN response

International Nuclear Information System (INIS)

Smith, D.

2009-01-01

The most vital element for responding emergency personnel to a CBRN attack is the incident command linkup and dissemination of information. Incident Command, the basic foundation of the National Incident Management System (NIMS), is the first thing that must be effectively established when a response is required in any emergency. When initial evaluation of the scene determines that the incident involves CBRN, specialized resources from a wide array of assets must be activated quickly to mitigate the hazards. In this paper, we examine the information that the Incident Commander must be prepared to convey to those specialized assets responding. We will also look at what questions those specialized resources may ask while en route and upon arrival. Another key element that will be discussed is the placement of those resources in the hierarchy of the National Incident Management System. The information that the Incident Commander (IC) must be prepared to convey to those specialized assets responding is crucial for an efficient response and effective deployment. What questions might those specialized CBRN resources ask while en route and upon arrival? At a bare minimum, the four basic questions of who is in charge of the incident, where is the incident located, what transpired to trigger a response, and when did the incident occur must be answered. These questions should be answered while en route to the scene so that the Commander of the responding CBRN unit can formulate a plan on the move and prepare his response accordingly. While in transit, the CBRN responders should maintain contact with a representative of the Incident Command at the scene so that the latest information is available. Discussions should include anticipated logistical requirements such as personal protective equipment (PPE), decon requirements, communications protocols, and medical care issues. The CBRN Commander will need to know if the site is secure, has it been cleared of explosive hazards

Normalized Index of Synergy for Evaluating the Coordination of Motor Commands

Science.gov (United States)

Togo, Shunta; Imamizu, Hiroshi

2015-01-01

Humans perform various motor tasks by coordinating the redundant motor elements in their bodies. The coordination of motor outputs is produced by motor commands, as well properties of the musculoskeletal system. The aim of this study was to dissociate the coordination of motor commands from motor outputs. First, we conducted simulation experiments where the total elbow torque was generated by a model of a simple human right and left elbow with redundant muscles. The results demonstrated that muscle tension with signal-dependent noise formed a coordinated structure of trial-to-trial variability of muscle tension. Therefore, the removal of signal-dependent noise effects was required to evaluate the coordination of motor commands. We proposed a method to evaluate the coordination of motor commands, which removed signal-dependent noise from the measured variability of muscle tension. We used uncontrolled manifold analysis to calculate a normalized index of synergy. Simulation experiments confirmed that the proposed method could appropriately represent the coordinated structure of the variability of motor commands. We also conducted experiments in which subjects performed the same task as in the simulation experiments. The normalized index of synergy revealed that the subjects coordinated their motor commands to achieve the task. Finally, the normalized index of synergy was applied to a motor learning task to determine the utility of the proposed method. We hypothesized that a large part of the change in the coordination of motor outputs through learning was because of changes in motor commands. In a motor learning task, subjects tracked a target trajectory of the total torque. The change in the coordination of muscle tension through learning was dominated by that of motor commands, which supported the hypothesis. We conclude that the normalized index of synergy can be used to evaluate the coordination of motor commands independently from the properties of the

Command Leadership DEOCS 4.1 Construct Validity Summary

Science.gov (United States)

2017-08-01

Command Leadership DEOCS 4.1 Construct Validity Summary DEFENSE EQUAL OPPORTUNITY MANAGEMENT INSTITUTE...Report #15-18 1 Command Leadership DEOCS 4.1 Construct Validity Summary Background In 2014, DEOMI released DEOCS 4.0 for Department of Defense...individual items on the DEOCS. The following paper details the work conducted to modify the factor of Leadership Cohesion so that it focuses more

Rapid Response Command and Control (R2C2): a systems engineering analysis of scaleable communications for Regional Combatant Commanders

OpenAIRE

Sullivan, Lisa; Cannon, Lennard; Reyes, Ronel; Bae, Kitan; Colgary, James; Minerowicz, Nick; Leong, Chris; Lim, Harry; Lim, Hang Sheng; Ng, Chin Chin; Neo, Tiong Tien; Tan, Guan Chye; Ng, Yu Loon; Wong, Eric; Wong, Heng Yue

2006-01-01

Includes supplementary material. Disaster relief operations, such as the 2005 Tsunami and Hurricane Katrina, and wartime operations, such as Operation Enduring Freedom and Operation Iraqi Freedom, have identified the need for a standardized command and control system interoperable among Joint, Coalition, and Interagency entities. The Systems Engineering Analysis Cohort 9 (SEA-9) Rapid Response Command and Control (R2C2) integrated project team completed a systems engineering (SE) ...

TARDEC Ground Vehicle Robotics: Vehicle Dynamic Characterization and Research

Science.gov (United States)

2015-09-01

subassemblies that would be common on ground vehicles. Powertrain Systems: Gas Powered, Diesel , Turbo Diesel , Gas Turbine, Hybrid: Gas- Electric...PROPULSE (Hybrid Diesel - Electric System with Export Power), Command Zone (integrated vehicle control and diagnostic system), and TerraMax (Unmanned... Diesel -Electric, Series, Parallel. Power Distribution: RWD, FWD, AWD, open diff, LSD, Torsen diff, differential braking (traction control), drive by

GPS and the Joint Force Commander: Critical Asset, Critical Vulnerability

National Research Council Canada - National Science Library

McPherson, Michael

2001-01-01

Joint Force Commanders (JFCs) have become over reliant on military and commercial satellite systems for intelligence gathering and dissemination, weather, command, control, communications, and navigation/guidance functions, to name a few...

Robot Task Commander with Extensible Programming Environment

Science.gov (United States)

Hart, Stephen W (Inventor); Yamokoski, John D. (Inventor); Wightman, Brian J (Inventor); Dinh, Duy Paul (Inventor); Gooding, Dustin R (Inventor)

2014-01-01

A system for developing distributed robot application-level software includes a robot having an associated control module which controls motion of the robot in response to a commanded task, and a robot task commander (RTC) in networked communication with the control module over a network transport layer (NTL). The RTC includes a script engine(s) and a GUI, with a processor and a centralized library of library blocks constructed from an interpretive computer programming code and having input and output connections. The GUI provides access to a Visual Programming Language (VPL) environment and a text editor. In executing a method, the VPL is opened, a task for the robot is built from the code library blocks, and data is assigned to input and output connections identifying input and output data for each block. A task sequence(s) is sent to the control module(s) over the NTL to command execution of the task.

Leaders in space: Mission commanders and crew on the International Space Station

Science.gov (United States)

Brcic, Jelena

Understanding the relationship between leaders and their subordinates is important for building better interpersonal connections, improving group cohesion and cooperation, and increasing task success. This relationship has been examined in many types of groups but not a great amount of analysis has been applied to spaceflight crews. We specifically investigated differences between mission commanders and flight commanders during missions to the International Space Station (ISS). Astronauts and cosmonauts on the ISS participate in long-duration missions (2 to 6 months in length) in which they live and work in close proximity with their 2 or 3 member crews. The leaders are physically distant from their command centres which may result in delay of instructions or important advice. Therefore, the leaders must be able to make quick, sound decisions with unwavering certainty. Potential complications include that the leaders may not be able to exercise their power fully, since material reward or punishment of any one member affects the whole group, and that the leader's actions (or lack thereof) in this isolated, confined environment could create stress in members. To be effective, the mission commander must be able to prevent or alleviate any group conflict and be able to relate to members on an emotional level. Mission commanders and crew are equal in the competencies of spaceflight; therefore, what are the unique characteristics that enable the commanders to fulfill their role? To highlight the differences between commander and crew, astronaut journals, diaries, pre- flight interviews, NASA oral histories, and letters written to family from space were scored and analyzed for values and coping styles. During pre-flight, mission commanders scored higher than other crew members on the values of Stimulation, Security, Universalism, Conformity, Spirituality, and Benevolence, and more often used Self-Control as a coping style. During the long-duration mission on ISS, mission

Fit for Command: Military Leadership Attributes for Small Wars

Science.gov (United States)

2013-04-18

Corps Command and StaffCollege Marine Corps University 2076 outh Street Marine Corps Combat Development Command Quantico, Virgin ia?? 134-5068...by the local imam to join him in the celebration of a religious Shi’a holiday .79 Just before departure to the mosque his translator informed him

The Warfighting Capacity of Air Combat Command's Numbered Air Forces

National Research Council Canada - National Science Library

Hanser, Lawrence

2000-01-01

...) of the Air Combat Command (ACC), General Richard E. Hawley, the ACC Commander, asked if RAND could offer an analysis of the number of NAFs that were needed by ACC to meet warfighting requirements...

Modular code supervisor. Automatic generation of command language

International Nuclear Information System (INIS)

Dumas, M.; Thomas, J.B.

1988-01-01

It is shown how, starting from a problem formulated by the user, to generate the adequate calculation procedure in the command code, and acquire the data necessary for the calculation while verifying their validity. Modular codes are used, because of their flexibility and wide utilisation. Modules are written in Fortran, and calculations are done in batches according to an algorithm written in the GIBIANE command language. The action plans are based on the STRIPS and WARPLAN families. Elementary representation of a module and special instructions are illustrated. Dynamic construction macro-actions, and acquisition of the specification (which allows users to express the goal of a program without indicating which algorithm is used to reach the goal) are illustrated. The final phase consists in translating the algorithm into the command language [fr

Command History for 1990

Science.gov (United States)

1991-05-01

Marine Corps Tiaining Systems (CBESS) memorization training Inteligence Center, Dam Neck Threat memorization training Commander Tactical Wings, Atlantic...News Shipbuilding Technical training AEGIS Training Center, Dare Artificial Intelligence (Al) Tools Computerized firm-end analysis tools NETSCPAC...Technology Department and provides computational and electronic mail support for research in areas of artificial intelligence, computer-assisted instruction

Mission Command and JC41: Managing Chaos in a Dynamic World

Science.gov (United States)

2018-04-20

doubly so, but perhaps not solely for the reasons expected. History has seen the progression of technology enable commanders and staffs to extend their...highlights the degree to which each Service embraces and codifies the mission command concept. Chapter 3 covers the history of the technologies ...Abstract Executing effective mission command has always been a challenge and in today’s technologically saturated joint operating environment is

Commands for financial data management and portfolio optimization

OpenAIRE

C. Alberto Dorantes

2013-01-01

Several econometric software offer portfolio management tools for practitioners and researchers. For example, MatLab and R offer a great variety of tools for the simulation, optimization, and analysis of financial time series. Stata, together with Mata, offers powerful programming tools for the simulation, optimization, and analysis of financial data. However, related user commands are scarce. In this presentation, commands for online market data collection, data manipulation, and financial a...

Linux command line and shell scripting bible

CERN Document Server

Blum, Richard

2014-01-01

Talk directly to your system for a faster workflow with automation capability Linux Command Line and Shell Scripting Bible is your essential Linux guide. With detailed instruction and abundant examples, this book teaches you how to bypass the graphical interface and communicate directly with your computer, saving time and expanding capability. This third edition incorporates thirty pages of new functional examples that are fully updated to align with the latest Linux features. Beginning with command line fundamentals, the book moves into shell scripting and shows you the practical application

'The Danger of Divided Command': British civil and military disputes ...

African Journals Online (AJOL)

Commander-in-Chief of the Indian Army, Lord Kitchener, which culminated in Curzon's ... and the officers commanding forces would have no doubt as to their .... but assuming financial responsibility for its own defence would have been ...

Prospective Study of Plasmodium vivax Malaria Recurrence after Radical Treatment with a Chloroquine-Primaquine Standard Regimen in Turbo, Colombia

Science.gov (United States)

Blair, Silvia; Akinyi Okoth, Sheila; Udhayakumar, Venkatachalam; Marcet, Paula L.; Escalante, Ananias A.; Alexander, Neal; Rojas, Carlos

2016-01-01

Plasmodium vivax recurrences help maintain malaria transmission. They are caused by recrudescence, reinfection, or relapse, which are not easily differentiated. A longitudinal observational study took place in Turbo municipality, Colombia. Participants with uncomplicated P. vivax infection received supervised treatment concomitantly with 25 mg/kg chloroquine and 0.25 mg/kg/day primaquine for 14 days. Incidence of recurrence was assessed over 180 days. Samples were genotyped, and origins of recurrences were established. A total of 134 participants were enrolled between February 2012 and July 2013, and 87 were followed for 180 days, during which 29 recurrences were detected. The cumulative incidence of first recurrence was 24.1% (21/87) (95% confidence interval [CI], 14.6 to 33.7%), and 86% (18/21) of these events occurred between days 51 and 110. High genetic diversity of P. vivax strains was found, and 12.5% (16/128) of the infections were polyclonal. Among detected recurrences, 93.1% (27/29) of strains were genotyped as genetically identical to the strain from the previous infection episode, and 65.5% (19/29) of infections were classified as relapses. Our results indicate that there is a high incidence of P. vivax malaria recurrence after treatment in Turbo municipality, Colombia, and that a large majority of these episodes are likely relapses from the previous infection. We attribute this to the primaquine regimen currently used in Colombia, which may be insufficient to eliminate hypnozoites. PMID:27185794

STS-93 Commander Collins suits up for launch

Science.gov (United States)

1999-01-01

During the third launch preparations in the Operations and Checkout Building, STS-93 Commander Eileen M. Collins waves while having her launch and entry suit checked. After Space Shuttle Columbia's July 20 and 22 launch attempts were scrubbed, the launch was again rescheduled for Friday, July 23, at 12:24 a.m. EDT. STS-93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The STS-93 crew numbers five: Commander Collins, Pilot Jeffrey S. Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

Education Requirements of Command Positions in the U.S. Border Patrol

Science.gov (United States)

2015-06-12

commander. Degrees in Culinary Arts , Fashion Design, or Film Studies are thus considered as relevant and valuable for command as degrees in Border...Command and General Staff College in partial fulfillment of the requirements for the degree MASTER OF MILITARY ART AND SCIENCE Homeland Security...Z39.18 iii MASTER OF MILITARY ART AND SCIENCE THESIS APPROVAL PAGE Name of Candidate: Julio C. Peña Thesis Title: Education Requirements of

Command and Control for Homeland Security

National Research Council Canada - National Science Library

Greene, Marjorie

2007-01-01

... Analysis of the Toronto SARS Outbreak, Vertical Integration, Vertical Integration in a Military Command Hierarchy, Information flows for a domestic incident, C2 for Homeland Security will benefit...

Command-And-Control or Taxation?

DEFF Research Database (Denmark)

Oh, Christina; Svendsen, Gert Tinggaard

2015-01-01

an ineffective command-and-control (CAC) tool, whereas Denmark has chosen the effective tool of taxation. One main explanation for this variation in policy choice is the variation in institutional setups, namely the corporatist route in Denmark versus the pluralistic route in California....

Tools virtualization for command and control systems

Science.gov (United States)

Piszczek, Marek; Maciejewski, Marcin; Pomianek, Mateusz; Szustakowski, Mieczysław

2017-10-01

Information management is an inseparable part of the command process. The result is that the person making decisions at the command post interacts with data providing devices in various ways. Tools virtualization process can introduce a number of significant modifications in the design of solutions for management and command. The general idea involves replacing physical devices user interface with their digital representation (so-called Virtual instruments). A more advanced level of the systems "digitalization" is to use the mixed reality environments. In solutions using Augmented reality (AR) customized HMI is displayed to the operator when he approaches to each device. Identification of device is done by image recognition of photo codes. Visualization is achieved by (optical) see-through head mounted display (HMD). Control can be done for example by means of a handheld touch panel. Using the immersive virtual environment, the command center can be digitally reconstructed. Workstation requires only VR system (HMD) and access to information network. Operator can interact with devices in such a way as it would perform in real world (for example with the virtual hands). Because of their procedures (an analysis of central vision, eye tracking) MR systems offers another useful feature of reducing requirements for system data throughput. Due to the fact that at the moment we focus on the single device. Experiments carried out using Moverio BT-200 and SteamVR systems and the results of experimental application testing clearly indicate the ability to create a fully functional information system with the use of mixed reality technology.

Command History, 1993.

Science.gov (United States)

1994-04-01

his space capsule. The ()CUILAR COtJNTI:,RROI,.L I)FVICI" was built by the Naval Air Rework Facility, NAS Pensacola. tfor NAMRI, in the early 1960s...Dunwoody, GA Kevin G. Singleton, ENS USNR Naval Aviation Schools Command Kyle W M. Taylor, ENS USNR U.S. Naval Academy Jason A. Temple, ENS USNR Auburn...Pensacola, 13-15 Oct 93. Pokorski, T.L., LICDR MSC USN, attended Aircrew Modified IEquipment for Ladies in Aviation (AMELIA) Fri -service Long-range Planning

Increasing Classroom Compliance: Using a High-Probability Command Sequence with Noncompliant Students

Science.gov (United States)

Axelrod, Michael I.; Zank, Amber J.

2012-01-01

Noncompliance is one of the most problematic behaviors within the school setting. One strategy to increase compliance of noncompliant students is a high-probability command sequence (HPCS; i.e., a set of simple commands in which an individual is likely to comply immediately prior to the delivery of a command that has a lower probability of…

ASTP crewmen in Apollo Command Module Trainer during training session at JSC

Science.gov (United States)

1975-01-01

The three members of the American ASTP prime crew are photographed inside the Apollo Command Module (CM) trainer in a water tank in bldg 260 during water egress training at JSC. They are, left to right, Astronauts Thomas P. Stafford, commander; Vance D. Brand, command module pilot; and Donald K. Slayton, docking module pilot (23430); Slayton attaches his life preserver as he egresses an Apollo Command Module trainer in a water tank in bldg 260 during water egresss training at JSC. Astronauts Brand (on left) and Stafford have already egressed the trainer and are seated in a three-man life raft.

Ubuntu Linux Toolbox 1000 + Commands for Ubuntu and Debian Power Users

CERN Document Server

Negus, Christopher

2008-01-01

In this handy, compact guide, you'll explore a ton of powerful Ubuntu Linux commands while you learn to use Ubuntu Linux as the experts do: from the command line. Try out more than 1,000 commands to find and get software, monitor system health and security, and access network resources. Then, apply the skills you learn from this book to use and administer desktops and servers running Ubuntu, Debian, and KNOPPIX or any other Linux distribution.

Research into command, control, and communications in space construction

Science.gov (United States)

Davis, Randal

1990-01-01

Coordinating and controlling large numbers of autonomous or semi-autonomous robot elements in a space construction activity will present problems that are very different from most command and control problems encountered in the space business. As part of our research into the feasibility of robot constructors in space, the CSC Operations Group is examining a variety of command, control, and communications (C3) issues. Two major questions being asked are: can we apply C3 techniques and technologies already developed for use in space; and are there suitable terrestrial solutions for extraterrestrial C3 problems? An overview of the control architectures, command strategies, and communications technologies that we are examining is provided and plans for simulations and demonstrations of our concepts are described.

A Proposal for the Merger of the U.S. Army Recruiting Command (USAREC) and the U.S. Army Cadet Command: One Recruiting Organization - "More Than a Partnership"

National Research Council Canada - National Science Library

Kleppinger, Tim

2001-01-01

...) and the United States Army Cadet Command into one accessions organization. For the past five years both USAREC and Cadet Command have found greater difficulty in achieving their annual missions...

Is There a Need For a Joint Reserve Components Command?

Science.gov (United States)

2013-03-01

Bravo Zulu ”. If these words were heard by a Soldier, it might be interpreted as poor performance. By having one organization as a single source for...Commander, Joint Reserve Components Command. Creation of the JRCC would, in time, strengthen partnerships between the reserve components of each

Modelo analítico rizomático para el estudio de los efectos de las políticas educativas regionales en la experiencia escolar cotidiana: las perspectivas de Rockwell, Bourdieu y Ball

Directory of Open Access Journals (Sweden)

Silvana Lorena Lagoria

Full Text Available Resumen: La escuela cotidiana se comprende en parte por un particular trasfondo que tiñe toda la experiencia que allí se desarrolla. Ese trasfondo lo constituye la cultura escolar. En su construcción intervienen tanto prácticas internas como externas a la escuela, entre ellas, las políticas educativas. La influencia de las políticas educativas regionales sobre la conformación de la cultura institucional en el devenir del cotidiano escolar se plantea como un interesante y complejo objeto a desentrañar. Para emprender ese camino es importante construir una base teórica consistente a partir de la conjunción de diferentes fuentes. En términos de Tello (2015, esto implica concebir un sustento teórico rizomático como base para analizar la cultura escolar en el marco de la “escuela cotidiana” (Rockwell, 2000. En definitiva, lo que planteamos aquí es la necesidad de construir un eje epistemológico potente para hacer inteligibles los efectos de las políticas educativas en el cotidiano escolar. En ese sentido, el presente trabajo se propone interrelacionar un conjunto de perspectivas teóricas a modo de red, para comprender un aspecto intrínseco de la escuela: los efectos de las políticas educativas en la cultura institucional. En primer lugar, definimos qué entendemos por cultura y cultura institucional. A continuación proponemos nuestro modelo analítico rizomático, integrando los aportes teóricos de Rockwell, Bourdieu y Ball. Finalmente, en las conclusiones, realizamos una breve integración de las ideas expuestas en el cuerpo de este trabajo.

Global Missile Defense: The Case for a New Operational Command Structure

National Research Council Canada - National Science Library

Galazin, Jared J

2005-01-01

...), violates the principle of unity of command. Placing components of the BMDS under the control of different combatant commanders creates unnecessary friction in a process where speed of execution is measured in seconds...

Network, system, and status software enhancements for the autonomously managed electrical power system breadboard. Volume 3: Commands specification

Science.gov (United States)

Mckee, James W.

1990-01-01

This volume (3 of 4) contains the specification for the command language for the AMPS system. The volume contains a requirements specification for the operating system and commands and a design specification for the operating system and command. The operating system and commands sits on top of the protocol. The commands are an extension of the present set of AMPS commands in that the commands are more compact, allow multiple sub-commands to be bundled into one command, and have provisions for identifying the sender and the intended receiver. The commands make no change to the actual software that implement the commands.

Modeling and simulating command and control for organizations under extreme situations

CERN Document Server

Moon, Il-Chul; Kim, Tag Gon

2013-01-01

Commanding and controlling organizations in extreme situations is a challenging task in military, intelligence, and disaster management. Such command and control must be quick, effective, and considerate when dealing with the changing, complex, and risky conditions of the situation. To enable optimal command and control under extremes, robust structures and efficient operations are required of organizations. This work discusses how to design and conduct virtual experiments on resilient organizational structures and operational practices using modeling and simulation. The work illustrates key a

Apollo 10 astronauts in space suits in front of Command Module

Science.gov (United States)

1968-01-01

Three astronauts named as the prime crew of the Apollo 10 space mission. Left to right, are Eugene A. Cernan, lunar module pilot; John W. Young, command module pilot; and Thomas P. Stafford, commander.

Man/terminal interaction evaluation of computer operating system command and control service concepts. [in Spacelab

Science.gov (United States)

Dodson, D. W.; Shields, N. L., Jr.

1978-01-01

The Experiment Computer Operating System (ECOS) of the Spacelab will allow the onboard Payload Specialist to command experiment devices and display information relative to the performance of experiments. Three candidate ECOS command and control service concepts were reviewed and laboratory data on operator performance was taken for each concept. The command and control service concepts evaluated included a dedicated operator's menu display from which all command inputs were issued, a dedicated command key concept with which command inputs could be issued from any display, and a multi-display concept in which command inputs were issued from several dedicated function displays. Advantages and disadvantages are discussed in terms of training, operational errors, task performance time, and subjective comments of system operators.

The use of augmented reality in command and control situation ...

African Journals Online (AJOL)

This study identifies possible uses of augmented reality in command and control applications with specific attention to situation awareness in the South African context. Applications across the different command and control functions, as well as at the different levels of military operations are considered. The article concludes ...

Comparative Research of Navy Voluntary Education at Operational Commands

Science.gov (United States)

2017-03-01

into a national and international market. This is especially effects land-grant institutions who can educate the citizens within their state by...RESEARCH OF NAVY VOLUNTARY EDUCATION AT OPERATIONAL COMMANDS by Christopher B. Veenhuis March 2017 Thesis Co-Advisors: William Hatch Chad...COVERED Master’s thesis 4. TITLE AND SUBTITLE COMPARATIVE RESEARCH OF NAVY VOLUNTARY EDUCATION AT OPERATIONAL COMMANDS 5. FUNDING NUMBERS 6. AUTHOR(S

United States Southern Command * Home

Science.gov (United States)

or concerns please email or call us at 305-437-2287. Testing The USAG- Miami Joint Education Testing the Air Force | The Air University | US Air Force Academy Army: Army Continued Education System | Army Marine Corps Institute | US Marine Corps Training and Education Command | US Marine Corps University Navy

Predicting compliance with command hallucinations: anger, impulsivity and appraisals of voices' power and intent.

Science.gov (United States)

Bucci, Sandra; Birchwood, Max; Twist, Laura; Tarrier, Nicholas; Emsley, Richard; Haddock, Gillian

2013-06-01

Command hallucinations are experienced by 33-74% of people who experience voices, with varying levels of compliance reported. Compliance with command hallucinations can result in acts of aggression, violence, suicide and self-harm; the typical response however is non-compliance or appeasement. Two factors associated with such dangerous behaviours are anger and impulsivity, however few studies have examined their relationship with compliance to command hallucinations. The current study aimed to examine the roles of anger and impulsivity on compliance with command hallucinations in people diagnosed with a psychotic disorder. The study was a cross-sectional design and included individuals who reported auditory hallucinations in the past month. Subjects completed a variety of self-report questionnaire measures. Thirty-two people experiencing command hallucinations, from both in-patient and community settings, were included. The tendency to appraise the voice as powerful, to be impulsive, to experience anger and to regulate anger were significantly associated with compliance with command hallucinations to do harm. Two factors emerged as significant independent predictors of compliance with command hallucinations; omnipotence and impulsivity. An interaction between omnipotence and compliance with commands, via a link with impulsivity, is considered and important clinical factors in the assessment of risk when working with clients experiencing command hallucinations are recommended. The data is highly suggestive and warrants further investigation with a larger sample. Copyright © 2013 Elsevier B.V. All rights reserved.

New Global Missions for Strategic Command

National Research Council Canada - National Science Library

Graham, David

2002-01-01

.... The focus of this White Paper is on the external decisions that will be needed to provide the Command with a clear mission, and the authority, resources and organizational support necessary to perform the mission...

Population structure and accompanying biota of the snail Turbo (Callopoma funiculosus (Gastropoda: Turbinidae, on Socorro Island, Revillagigedo Archipelago, Mexico

Directory of Open Access Journals (Sweden)

Oscar E Holguin Quiñones

2006-12-01

Full Text Available The porcelain snail, Turbo funiculosus, is a potential fishery resource that almost has not been studied or used commercially. In March of 1992, we sampled T. funiculosus in Bahía Binners and Bahía Blanca, Socorro Island, Revillagigedo Archipelago, using 25 m² quadrants. We found that total length varies between 3.0 and 85 mm, proportional weight between 3.0 and 228 g, and density between 6.21 and 9.87 ind/m². The largest organisms (over 50 mm contain 30.6 % of soft parts. Porcelain snail populations remain unexploited on Revillagedo Archipelago and could be a potential resource under an adequate management strategy. Rev. Biol. Trop. 54 (4: 1079-1084. Epub 2006 Dec. 15.El caracol porcelana, Turbo funiculosus, es un recurso pesquero potencial que casi no ha sido estudiado ni se ha utilizado comercialmente. En marzo de 1992, se realizó un muestreo de T. funiculosus en Bahía Binners y Bahía Blanca, isla Socorro, archipiélago Revillagigedo, empleando cuadrantes de 25 m2. Se encontraron variaciones en la longitud total entre 3.0 y 85 mm, el peso proporcional entre 3.0 y 228 g, y la densidad entre 6.21 y 9.87 ind/m2. Los organismos de mayor tamaño (más de 50 mm contienen 30.6 % de partes suaves. Las poblaciones del caracol porcelana siguen siendo inexplotadas en el archipiélago Revillagedo y podrían ser un recurso potencial de la industria pesquera bajo un adecuado plan de manejo.

Usefulness of dual echo volumetric isotropic turbo spin echo acquisition (VISTA) in MR imaging of the temporomandibular joint

International Nuclear Information System (INIS)

Sugimori, Yuko; Tanaka, Shigeko; Naito, Yukari; Nishimura, Tetsuya; Yamamoto, Akira; Miki, Yukio; Ohfuji, Satoko; Katsumata, Yasutomo

2013-01-01

We investigated the ability to detect the articular disk and joint effusion of the temporomandibular joint (TMJ) of a method of dual echo volumetric isotropic turbo spin echo acquisition (DE-VISTA) additional fusion images (AFI). DE-VISTA was performed in the 26 TMJ of 13 volunteers and 26 TMJ of 13 patients. Two-dimensional (2D) dual echo turbo spin echo was performed in the 26 TMJ of 13 volunteers. On a workstation, we added proton density-weighted images (PDWI) and T 2 weighted images (T 2 WI) of the DE-VISTA per voxel to reconstruct DE-VISTA-AFI. Two radiologists reviewed these images visually and quantitatively. Visual evaluation of the articular disk was equivalent between DE-VISTA-AFI and 2D-PDWI. The sliding thin-slab multiplanar reformation (MPR) method of DE-VISTA-AFI could detect all articular disks. The ratio of contrast (CR) of adipose tissue by the articular disk to that of the articular disk itself was significantly higher in DE-VISTA-AFI than DE-VISTA-PDWI (P 2 WI but in only 3 of those joints in 2D-T 2 WI. The CR of joint effusion to adipose tissue on DE-VISTA-AFI did not differ significantly from that on DE-VISTA-PDWI. However, using DE-VISTA-T 2 WI in addition to DE-VISTA-PDWI, we could visually identify joint effusion on DE-VISTA-AFI that could not be identified on DE-VISTA-PDWI alone. DE-VISTA-AFI can depict the articular disk and a small amount of joint effusion by the required plane of MPR using the sliding thin-slab MPR method. (author)

A Low-Complexity UEP Methodology Demonstrated on a Turbo-Encoded Wavelet Image Satellite Downlink

Directory of Open Access Journals (Sweden)

Salemi Eric

2008-01-01

Full Text Available Realizing high-quality digital image transmission via a satellite link, while optimizing resource distribution and minimizing battery consumption, is a challenging task. This paper describes a methodology to optimize a turbo-encoded wavelet-based satellite downlink progressive image transmission system with unequal error protection (UEP techniques. To achieve that goal, we instantiate a generic UEP methodology onto the system, and demonstrate that the proposed solution has little impact on the average performance, while greatly reducing the run-time complexity. Based on a simple design-time distortion model and a low-complexity run-time algorithm, the provided solution can dynamically tune the system's configuration to any bitrate constraint or channel condition. The resulting system outperforms in terms of peak signal-to-noise ratio (PSNR, a state-of-the-art, fine-tuned equal error protection (EEP solution by as much as 2 dB.

A Low-Complexity UEP Methodology Demonstrated on a Turbo-Encoded Wavelet Image Satellite Downlink

Directory of Open Access Journals (Sweden)

Eric Salemi

2008-01-01

Full Text Available Realizing high-quality digital image transmission via a satellite link, while optimizing resource distribution and minimizing battery consumption, is a challenging task. This paper describes a methodology to optimize a turbo-encoded wavelet-based satellite downlink progressive image transmission system with unequal error protection (UEP techniques. To achieve that goal, we instantiate a generic UEP methodology onto the system, and demonstrate that the proposed solution has little impact on the average performance, while greatly reducing the run-time complexity. Based on a simple design-time distortion model and a low-complexity run-time algorithm, the provided solution can dynamically tune the system's configuration to any bitrate constraint or channel condition. The resulting system outperforms in terms of peak signal-to-noise ratio (PSNR, a state-of-the-art, fine-tuned equal error protection (EEP solution by as much as 2 dB.

10 commandments of smile esthetics

Science.gov (United States)

Machado, Andre Wilson

2014-01-01

The search for esthetic treatment has persisted in the routine of dental professionals. Following this trend, dental patients have sought treatment with the primary aim of improving smile esthetics. The aim of this article is to present a protocol to assess patient's smile: The 10 Commandments of smile esthetics. PMID:25279532

Terrain Commander: Unattended Ground-Based Surveillance System

National Research Council Canada - National Science Library

Steadman, Bob

2000-01-01

.... Terrain Commander OASIS provides next generation target detection, classification, and tracking through smart sensor fusion of beamforming acoustic, seismic, passive infrared, and magnetic sensors...

MENINGKATKAN HASIL BELAJAR KIDS ATLETIK LEMPAR TURBO MELALUI MODIFIKASI PERMAINAN BOLA BEREKOR BAGI SISWA KELAS 5 SDN 1 SUKOREJO TAHUN AJARAN 2013/2014

Directory of Open Access Journals (Sweden)

Hasan Khoerudin

2015-03-01

Full Text Available The purpose of this study was to determine the improvement of learning outcomes athletic kids throwing turbo through modification of the game ball tailed for the Grade 5 Elementary School 1 Sukorejo academic year 2013/2014 . This study uses action research. In the implementation consists of two cycles. The instrument used in this study is the test performance of students, student observation sheet, and a written test. Based on the results, the percentage of mastery learning in the first cycle, psychomotor aspects of 32.4 %, 76.5 % affective aspects, cognitive aspects of 94.2 %, and mastery learning students classically 64.7 % of the total number of students. In the second cycle psychomotor aspects of 76.5 %, 88.2 % affective aspects, cognitive aspects of 97.1 %, and mastery learning students classically 85.3 % of the total number of students. In the present study showed an increase in student learning in classical completeness by 20.6 %, from 64.7 % to the first cycle to 85.3 % in the second cycle. Based on the above results, it was concluded that the modification of the game ball tailed in teaching athletic kids throwing turbo can improve student learning outcomes the Grade 5 Elementary School 1 Sukorejo academic year 2013/2014.

Hybrid EEG-fNIRS-Based Eight-Command Decoding for BCI: Application to Quadcopter Control.

Science.gov (United States)

Khan, Muhammad Jawad; Hong, Keum-Shik

2017-01-01

In this paper, a hybrid electroencephalography-functional near-infrared spectroscopy (EEG-fNIRS) scheme to decode eight active brain commands from the frontal brain region for brain-computer interface is presented. A total of eight commands are decoded by fNIRS, as positioned on the prefrontal cortex, and by EEG, around the frontal, parietal, and visual cortices. Mental arithmetic, mental counting, mental rotation, and word formation tasks are decoded with fNIRS, in which the selected features for classification and command generation are the peak, minimum, and mean ΔHbO values within a 2-s moving window. In the case of EEG, two eyeblinks, three eyeblinks, and eye movement in the up/down and left/right directions are used for four-command generation. The features in this case are the number of peaks and the mean of the EEG signal during 1 s window. We tested the generated commands on a quadcopter in an open space. An average accuracy of 75.6% was achieved with fNIRS for four-command decoding and 86% with EEG for another four-command decoding. The testing results show the possibility of controlling a quadcopter online and in real-time using eight commands from the prefrontal and frontal cortices via the proposed hybrid EEG-fNIRS interface.

CCL: console command language, RSX11M V4. 0, V7. OC tutorial

Energy Technology Data Exchange (ETDEWEB)

Downward, J. G.

1981-01-01

The normal user interface to an RSX11M operating system is via MCR (Monitor Console Routine). If terminal input is not specifically requested by a task, all data or commands typed in at a user's terminal, are sent by the terminal driver to MCR for decoding. The MCR task (and its child ...SYS) decode user commands (ACT, ABORT,RUN, DEV, ETC.). Tasks installed with special names of the form ...XYZ are treated as an external MCR command. Hence if a user types, XYZ COMMANDLINE, the commandline in its entirety (or at least up to 79 characters) is sent as input to the task ...XYZ. This is the conventional way of supplying most system commands and controlling the operation of the RSX11M utility program. The limitations of this method are: (1) each task must be installed to get MCR command lines; (2) each installed task uses valuable POOL space; (3) only privileged users can INSTALL and REMOVE tasks; and (4) non-privileged users are restricted to RUNning non-installed tasks. To solve this problem, a user tailorable Console Command Language (CCL) has been implemented which allows each user to have a private task control language to pass command lines to tasks that are not installed in th system as external MCR commands.

Oracle Enterprise Manager 12c command-line interface

CERN Document Server

Pot'Vin, Kellyn; Smith, Ray

2014-01-01

Oracle Enterprise Manager 12c Command-Line Interface shows how to use Enterprise Manager's powerful scripting language to automate your database administration work and save time by scripting routine tasks, and then executing those scripts across collections of databases and instances in your environment. This book is chock full of ready-made scripting examples contributed by the authors and leading members of the community. For example, you'll find scripts and examples of commands to: Remove an Enterprise Manager agent and its related targetsQuickly create administrator accounts that are ful

1 Commande multivariable du moteur asynchrone triphasé à cage ...

African Journals Online (AJOL)

AKA BOKO

Correspondance, courriel : rabenarivo.michel@yahoo.fr. Résumé. La commande du moteur asynchrone triphasé à ... synthèse du système à l'aide du logiciel MATLAB. Mots-clés : commande, système multivariable, variation de ... of the system by MATLAB software. Keywords : control, MIMO system, frequency variation, ...

Command and Control of the U.S. Tenth Army During the Battle of Okinawa

Science.gov (United States)

2009-06-12

Army‘s XXIV Corps, commanded by Major General John R . Hodge, and the U.S. Marine Corps‘ III Amphibious Corps, commanded by Major General Roy S. Geiger...Watanabe, was activated in April 1944. Ushijima assumed command in August 1944, after Watanabe was bedridden and sent back to Japan due to chronic...great success and combat experience during the war in the Pacific. Army Major General John R . Hodge commanded the XXIV Corps. Hodge was commissioned

STS-93 Commander Eileen Collins suits up for launch

Science.gov (United States)

1999-01-01

For the third time, in the Operations and Checkout Building, STS- 93 Commander Eileen M. Collins tries on her helmet with her launch and entry suit. After Space Shuttle Columbia's July 20 and 22 launch attempts were scrubbed, the launch was again rescheduled for Friday, July 23, at 12:24 a.m. EDT. STS-93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The STS-93 crew numbers five: Commander Collins, Pilot Jeffrey S. Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

Focused Logistics: Time for Functional Command

National Research Council Canada - National Science Library

Mintzlaff, Jeffrey G

2005-01-01

.... Military's distribution system -- the parts of the Department of Defense (DoD) that manage and execute the storage and movement of supplies to military customers -- consists of multiple entities and agencies made up of separate Services and commands...

The Habitat of Yellow Mouth Turban Turbo Chrysostomus, Linnaeus, 1758

Science.gov (United States)

Soekendarsi, E.

2018-03-01

In general, yellow mouth turban snail Turbo chrysostomus L. 1758 was found in intertidal and coral reef area. This animal is active at night (nocturnal) and settles the coral reef-flats area to do its activity as substrate. In doing its activity, yellow mouth turban snail can be found in the depth of 50 cm until 4 m of tidal area. The adult yellow mouth turban snails are found in great number at intertidal area’s border and at coastal area of coral reef-flats. Methodology that was used in this study is visual analysis (descriptive method), and divided into two parameters which were observed, i.e. abiotic and biotic. Abiotic components that were measured are; Oxygen (ppm), pH, Water Temperature (°C), Salinity (ppm), Ammonia (mg/L), Nitrate (mg/L), Nitrite (mg/L), and Calsium Carbonat (mg/L).Whereas, biotic components that were measured are; substrates, seaweeds, other organisms, and epilithon. The observation’s result of yellow mouth turban snail’s environmental condition showed: abiotic condition of the waters consists of oxygen 3-5 ppm, seawater pH 7-8, seawater temperature 23-26°C, and the salinity of 32-33 ppm. The Habitat of yellow mouth turban snail settled the reef-flats area that is overgrown covered by seaweed Sargassum sp. as the place to do its activity.

An analysis of Navy Recruiting Command's officer goaling models

OpenAIRE

Senter, Robert R.

1990-01-01

Approved for public release; distribution unlimited. This study examines the goaling models used by the Navy Recruiting Command for the Nurse Corps and Nuclear Propulsion Officer Candidate (NUPOC) programs. These two programs serve as representative samples for the numerous officer recruitment programs administered by the Navy Recruiting Command. The intent of the study is to analyze and validate the accuracy of the current goaling models, to ascertain factors which could improve the accur...

ARAC: A unique command and control resource

Energy Technology Data Exchange (ETDEWEB)

Bradley, M.M.; Baskett, R.L.; Ellis, J.S. [and others

1996-04-01

The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) is a centralized federal facility designed to provide real-time, world-wide support to military and civilian command and control centers by predicting the impacts of inadvertent or intentional releases of nuclear, biological, or chemical materials into the atmosphere. ARAC is a complete response system consisting of highly trained and experienced personnel, continually updated computer models, redundant data collection systems, and centralized and remote computer systems. With over 20 years of experience responding to domestic and international incidents, strong linkages with the Department of Defense, and the ability to conduct classified operations, ARAC is a unique command and control resource.

ARAC: A unique command and control resource

International Nuclear Information System (INIS)

Bradley, M.M.; Baskett, R.L.; Ellis, J.S.

1996-04-01

The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) is a centralized federal facility designed to provide real-time, world-wide support to military and civilian command and control centers by predicting the impacts of inadvertent or intentional releases of nuclear, biological, or chemical materials into the atmosphere. ARAC is a complete response system consisting of highly trained and experienced personnel, continually updated computer models, redundant data collection systems, and centralized and remote computer systems. With over 20 years of experience responding to domestic and international incidents, strong linkages with the Department of Defense, and the ability to conduct classified operations, ARAC is a unique command and control resource

Mature data transport and command management services for the Space Station

Science.gov (United States)

Carper, R. D.

1986-01-01

The duplex space/ground/space data services for the Space Station are described. The need to separate the uplink data service functions from the command functions is discussed. Command management is a process shared by an operation control center and a command management system and consists of four functions: (1) uplink data communications, (2) management of the on-board computer, (3) flight resource allocation and management, and (4) real command management. The new data service capabilities provided by microprocessors, ground and flight nodes, and closed loop and open loop capabilities are studied. The need for and functions of a flight resource allocation management service are examined. The system is designed so only users can access the system; the problems encountered with open loop uplink access are analyzed. The procedures for delivery of operational, verification, computer, and surveillance and monitoring data directly to users are reviewed.

Blossom Point Satellite Tracking and Command Station

Data.gov (United States)

Federal Laboratory Consortium — FUNCTION: The Blossom Point Satellite Command and Tracking Facility (BP) provides engineering and operational support to several complex space systems for the Navy...

Joint Mission Command Implementation

Science.gov (United States)

2016-01-22

choose. The paper finds that trust is strongly influenced by the subconscious brain and treating it like a tool ignores biology and results in... bias for action and empowerment.14 Since then, the services have evaluated their own concepts of command assessing them against Dempsey’s vision. Lt...understanding, intent, and trust, only trust is strongly influenced by the subconscious brain. Treating trust like it can be taught, or a behavior that

STS-93 Commander Collins suits up before launch

Science.gov (United States)

1999-01-01

In the Operations and Checkout Building, STS-93 Commander Eileen M. Collins gets help donning her launch and entry suit. After Space Shuttle Columbia's July 20 launch attempt was scrubbed at the T-7 second mark in the countdown, the launch was rescheduled for Thursday, July 22, at 12:28 a.m. EDT. The target landing date is July 26, 1999, at 11:24 p.m. EDT. STS-93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The new telescope is 20 to 50 times more sensitive than any previous X- ray telescope and is expected unlock the secrets of supernovae, quasars and black holes. The STS-93 crew numbers five: Commander Collins, Pilot Jeffrey S. Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

Hybrid EEG–fNIRS-Based Eight-Command Decoding for BCI: Application to Quadcopter Control

Science.gov (United States)

Khan, Muhammad Jawad; Hong, Keum-Shik

2017-01-01

In this paper, a hybrid electroencephalography–functional near-infrared spectroscopy (EEG–fNIRS) scheme to decode eight active brain commands from the frontal brain region for brain–computer interface is presented. A total of eight commands are decoded by fNIRS, as positioned on the prefrontal cortex, and by EEG, around the frontal, parietal, and visual cortices. Mental arithmetic, mental counting, mental rotation, and word formation tasks are decoded with fNIRS, in which the selected features for classification and command generation are the peak, minimum, and mean ΔHbO values within a 2-s moving window. In the case of EEG, two eyeblinks, three eyeblinks, and eye movement in the up/down and left/right directions are used for four-command generation. The features in this case are the number of peaks and the mean of the EEG signal during 1 s window. We tested the generated commands on a quadcopter in an open space. An average accuracy of 75.6% was achieved with fNIRS for four-command decoding and 86% with EEG for another four-command decoding. The testing results show the possibility of controlling a quadcopter online and in real-time using eight commands from the prefrontal and frontal cortices via the proposed hybrid EEG–fNIRS interface. PMID:28261084

U.S. Pacific Command > Organization > Organization Chart

Science.gov (United States)

Responsibility USPACOM Previous Commanders Organization Organization Chart Media News Flickr Photos Video Directory Media Inquiries Home : Organization : Organization Chart About DoD DoD Careers Join the Military

Mission Command: Elasticity, Equilibrium, Culture, and Intent

National Research Council Canada - National Science Library

Stewart, Keith G

2006-01-01

.... It is enabled by decentralization of authority and responsibility that allows subordinate commanders the latitude to plan and conduct operations based upon their understanding of the local situation...

Apollo 11 Command Service Module

Science.gov (United States)

1969-01-01

A close-up view of the Apollo 11 command service module ready to be mated with the spacecraft LEM adapter of the third stage. The towering 363-foot Saturn V was a multi-stage, multi-engine launch vehicle standing taller than the Statue of Liberty. Altogether, the Saturn V engines produced as much power as 85 Hoover Dams.

STS-93 Commander Eileen Collins waves to her family

Science.gov (United States)

1999-01-01

STS-93 Commander Eileen M. Collins waves to her family nearby, a last meeting before launch of mission STS-93 on July 20. Liftoff is scheduled for 12:36 a.m. EDT. The primary mission of STS-93 is the release of the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The new telescope is 20 to 50 times more sensitive than any previous X- ray telescope and is expected to unlock the secrets of supernovae, quasars and black holes. The STS-93 crew numbers five: Commander Collins, Pilot Jeffrey S. Ashby, and Mission Specialists Steven A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

Centralized Command and Control of Theater Missile Defense: The Joint Force Missile Defense Component Coordinator

National Research Council Canada - National Science Library

Bucey, William H

2006-01-01

.... The numerous commands, decentralized command and control, and limited and expensive resources involved in TMD require changes to the joint doctrine in order to provide unity of command and economy of force...

Should the Department of Defense Establish a Unified U.S. Logistics Command?

National Research Council Canada - National Science Library

Wenzel, Frank

2008-01-01

This monograph asserts that DoD should establish a Unified Combatant Command (COCOM)-level U.S. Logistics Command (USLOGCOM). DoD should begin a deliberate 10-20 year process to establish a USLOGCOM...

Basic interrupt and command structures and applications

International Nuclear Information System (INIS)

Davies, R.C.

1974-01-01

Interrupt and command structures of a real-time system are described through specific examples. References to applications of a real-time system and programing development references are supplied. (auth)

Proposal of Non-Contact Type Interface of Command Input Using Lip Motion Features

Science.gov (United States)

Sato, Yoshiyuki; Kageyama, Yoichi; Nishida, Makoto

Lip motion features are of practical use in identifying individuals. It is therefore important to develop non-contact type interface. For the interface using lip motion features, individual differences such as accents and dialects in commands should be accepted. In this paper, we propose a method to identify commands by analyzing three kinds of lip motion features. They are lip width, lip length, and ratio of width and length. The analysis is made on the basis of these features' relative values obtained from the primary and object frame. The proposed method has three steps. First, we extracted the lip motion features on the basis of both positions and shapes of lip in each frame of facial images. Second, standard patterns were created from features of six utterances per command. The standard pattern is able to reduce the relative difference in the lip motion features. Third, similarities among commands were computed by Dynamic-Programming (DP) matching. And then, the command with the largest similarity was selected as the target one. Our experimental results suggest that proposed method is useful to construct the non-contact type interface of command input using lip motion features.

Study and realisation of cabled interfaces for the control and command of the Saturne cyclotron

International Nuclear Information System (INIS)

Devailly, Jean

1975-01-01

This research thesis addressed the assessment of needs, design and realisation of some hardware used by the Saturne cyclotron to solve problems of command and control while using connections developed for the Saturne's computer. After some generalities (description of Saturne, requirements and constraints, general statements about acquisitions and commands, selection of the acquisition and command system, codes), the author presents the different hardware for analog acquisitions, digital acquisitions, analog commands, digital commands, all-or-none control, simulators, amplifiers and memories. He reports some examples: magnetic measurements, control of ejection currents, programs. He finally presents the developed hardware

A Lagrangian parcel based mixing plane method for calculating water based mixed phase particle flows in turbo-machinery

Science.gov (United States)

Bidwell, Colin S.

2015-05-01

A method for calculating particle transport through turbo-machinery using the mixing plane analogy was developed and used to analyze the energy efficient engine . This method allows the prediction of temperature and phase change of water based particles along their path and the impingement efficiency and particle impact property data on various components in the engine. This methodology was incorporated into the LEWICE3D V3.5 software. The method was used to predict particle transport in the low pressure compressor of the . The was developed by NASA and GE in the early 1980s as a technology demonstrator and is representative of a modern high bypass turbofan engine. The flow field was calculated using the NASA Glenn ADPAC turbo-machinery flow solver. Computations were performed for a Mach 0.8 cruise condition at 11,887 m assuming a standard warm day for ice particle sizes of 5, 20 and 100 microns and a free stream particle concentration of . The impingement efficiency results showed that as particle size increased average impingement efficiencies and scoop factors increased for the various components. The particle analysis also showed that the amount of mass entering the inner core decreased with increased particle size because the larger particles were less able to negotiate the turn into the inner core due to particle inertia. The particle phase change analysis results showed that the larger particles warmed less as they were transported through the low pressure compressor. Only the smallest 5 micron particles were warmed enough to produce melting with a maximum average melting fraction of 0.18. The results also showed an appreciable amount of particle sublimation and evaporation for the 5 micron particles entering the engine core (22.6 %).

Factores de riesgo sociales y ambientales relacionados con casos de leptospirosis de manejo ambulatorio y hospitalario, Turbo, Colombia

Directory of Open Access Journals (Sweden)

Dionisia Yusti

2013-08-01

Full Text Available Introducción. La leptospirosis es un problema de salud pública en el Urabá colombiano y poco se sabe sobre las condiciones ambientales y sociales de esta enfermedad en la región. Objetivo. Explorar algunos factores de riesgo relacionados con leptospirosis de manejo hospitalario y ambulatorio, en pacientes del municipio de Turbo durante los años 2010 y 2011. Materiales y métodos. Mediante un estudio descriptivo se exploraron factores relacionados conla exposición a Leptospira spp. (aspectos socio-demográficos, hábitos, condiciones físicas y de saneamiento de la vivienda, hacinamiento, fuentes de agua potable, presencia de roedores sinantrópicos y convivencia con animales en pacientes con leptospirosis que requirieron manejo hospitalario en el municipio de Turbo durante los años 2010 y 2011. Se utilizaron medidas estadísticas estandarizadas para estudios descriptivos. Resultados. Se encontró que el hábito de caminar descalzo en ambientes domésticos representó 4,27 (1,32-13,82 veces el riesgo para presentar leptospirosis de manejo hospitalario (p=0,012. El análisis multivariado exploratorio mostró que la presencia de fauna silvestre en las viviendas puede estar relacionada también con casos de manejo hospitalario. Este hallazgo representó 4,22 (1,13-15,72 veces el riesgo comparado con los casos ambulatorios que manifestaron no tener este tipo deanimales dentro de la vivienda (p=0,032. Conclusión. Este estudio plantea bases para diseñar e implementar intervenciones efectivas, orientadas desde el perfil de riesgos al que se exponen sus habitantes, en un área geográfica queexhibe una epidemiología dinámica de contexto complejo para leptospirosis.   doi: http://dx.doi.org/10.7705/biomedica.v33i0.1457

Preliminary thermodynamic study for an efficient turbo-blower external combustion Rankine cycle

Science.gov (United States)

Romero Gómez, Manuel; Romero Gómez, Javier; Ferreiro Garcia, Ramón; Baaliña Insua, Álvaro

2014-08-01

This research paper presents a preliminary thermodynamic study of an innovative power plant operating under a Rankine cycle fed by an external combustion system with turbo-blower (TB). The power plant comprises an external combustion system for natural gas, where the combustion gases yield their thermal energy, through a heat exchanger, to a carbon dioxide Rankine cycle operating under supercritical conditions and with quasi-critical condensation. The TB exploits the energy from the pressurised exhaust gases for compressing the combustion air. The study is focused on the comparison of the combustion system's conventional technology with that of the proposed. An energy analysis is carried out and the effect of the flue gas pressure on the efficiency and on the heat transfer in the heat exchanger is studied. The coupling of the TB results in an increase in efficiency and of the convection coefficient of the flue gas with pressure, favouring a reduced volume of the heat exchanger. The proposed innovative system achieves increases in efficiency of around 12 % as well as a decrease in the heat exchanger volume of 3/5 compared with the conventional technology without TB.

On-Board Real-Time Optimization Control for Turbo-Fan Engine Life Extending

Science.gov (United States)

Zheng, Qiangang; Zhang, Haibo; Miao, Lizhen; Sun, Fengyong

2017-11-01

A real-time optimization control method is proposed to extend turbo-fan engine service life. This real-time optimization control is based on an on-board engine mode, which is devised by a MRR-LSSVR (multi-input multi-output recursive reduced least squares support vector regression method). To solve the optimization problem, a FSQP (feasible sequential quadratic programming) algorithm is utilized. The thermal mechanical fatigue is taken into account during the optimization process. Furthermore, to describe the engine life decaying, a thermal mechanical fatigue model of engine acceleration process is established. The optimization objective function not only contains the sub-item which can get fast response of the engine, but also concludes the sub-item of the total mechanical strain range which has positive relationship to engine fatigue life. Finally, the simulations of the conventional optimization control which just consider engine acceleration performance or the proposed optimization method have been conducted. The simulations demonstrate that the time of the two control methods from idle to 99.5 % of the maximum power are equal. However, the engine life using the proposed optimization method could be surprisingly increased by 36.17 % compared with that using conventional optimization control.

Modeling of turbulent flows in cooling channels of turbo-machineries; Modelisation des ecoulements turbulents dans des canaux de refroidissement de turbomachines

Energy Technology Data Exchange (ETDEWEB)

Bidart, A.; Caltagirone, J.P.; Parneix, S. [Laboratoire MASTER-ENSCPB, 33 - Talence (France)

1997-12-31

The MASTER laboratory has been involved since several years in the creation and utilization of modeling tools for the prediction of 3-D turbulent flows and heat transfers in turbine blades in order to optimize the cooling systems of turbo-machineries. This paper describes one of the test-cases that has been used for the validation of the `Aquilon` calculation code developed in this aim. Then, the modeling performed with the `Fluent` industrial code in order to evaluate the possible improvements of the Aquilon code, is presented. (J.S.) 5 refs.

Exergy Analysis of a Subcritical Refrigeration Cycle with an Improved Impulse Turbo Expander

Directory of Open Access Journals (Sweden)

Zhenying Zhang

2014-08-01

Full Text Available The impulse turbo expander (ITE is employed to replace the throttling valve in the vapor compression refrigeration cycle to improve the system performance. An improved ITE and the corresponding cycle are presented. In the new cycle, the ITE not only acts as an expansion device with work extraction, but also serves as an economizer with vapor injection. An increase of 20% in the isentropic efficiency can be attained for the improved ITE compared with the conventional ITE owing to the reduction of the friction losses of the rotor. The performance of the novel cycle is investigated based on energy and exergy analysis. A correlation of the optimum intermediate pressure in terms of ITE efficiency is developed. The improved ITE cycle increases the exergy efficiency by 1.4%–6.1% over the conventional ITE cycle, 4.6%–8.3% over the economizer cycle and 7.2%–21.6% over the base cycle. Furthermore, the improved ITE cycle is also preferred due to its lower exergy loss.

A Commander in Chief's Network-Centric Odyssey

National Research Council Canada - National Science Library

Copley, E

2002-01-01

.... Each Armed Service has begun training and equipping its force using the tenets of Network-Centric Operations, but those forces come together for the first time under the combatant Commander-in-Chief...

Command injection attacks, continuations, and the Lambek calculus

Directory of Open Access Journals (Sweden)

Hayo Thielecke

2016-06-01

Full Text Available This paper shows connections between command injection attacks, continuations, and the Lambek calculus: certain command injections, such as the tautology attack on SQL, are shown to be a form of control effect that can be typed using the Lambek calculus, generalizing the double-negation typing of continuations. Lambek's syntactic calculus is a logic with two implicational connectives taking their arguments from the left and right, respectively. These connectives describe how strings interact with their left and right contexts when building up syntactic structures. The calculus is a form of propositional logic without structural rules, and so a forerunner of substructural logics like Linear Logic and Separation Logic.

The Role of the NCO Inside the BCT Command Post

Science.gov (United States)

2016-11-22

formation. Doctrine 2015 introduced the importance of mission command doctrine into operations at all levels of leadership, and in the last five...utilizing tents is crucial to support the combined arms maneuver of the brigade. Physical layout of the command post can promote or hinder the ability to...equipment when a printer starting printing or a coffee maker was turned on? Understanding how PDISE configurations distribute loads in order to maintain

An Operational Commander's Guide to the Media

National Research Council Canada - National Science Library

McCartney, Michael

2005-01-01

... of the embedded reporter . The Operational Commander is wise to review media relations and the successes and pitfalls of past conflicts, and to examine closely the results of Operation Iraqi Freedom so as to...

Decrease in medical command errors with use of a "standing orders" protocol system.

Science.gov (United States)

Holliman, C J; Wuerz, R C; Meador, S A

1994-05-01

The purpose of this study was to determine the physician medical command error rates and paramedic error rates after implementation of a "standing orders" protocol system for medical command. These patient-care error rates were compared with the previously reported rates for a "required call-in" medical command system (Ann Emerg Med 1992; 21(4):347-350). A secondary aim of the study was to determine if the on-scene time interval was increased by the standing orders system. Prospectively conducted audit of prehospital advanced life support (ALS) trip sheets was made at an urban ALS paramedic service with on-line physician medical command from three local hospitals. All ALS run sheets from the start time of the standing orders system (April 1, 1991) for a 1-year period ending on March 30, 1992 were reviewed as part of an ongoing quality assurance program. Cases were identified as nonjustifiably deviating from regional emergency medical services (EMS) protocols as judged by agreement of three physician reviewers (the same methodology as a previously reported command error study in the same ALS system). Medical command and paramedic errors were identified from the prehospital ALS run sheets and categorized. Two thousand one ALS runs were reviewed; 24 physician errors (1.2% of the 1,928 "command" runs) and eight paramedic errors (0.4% of runs) were identified. The physician error rate was decreased from the 2.6% rate in the previous study (P < .0001 by chi 2 analysis). The on-scene time interval did not increase with the "standing orders" system.(ABSTRACT TRUNCATED AT 250 WORDS)

Africa Command: U.S. Strategic Interests and the Role of the U.S. Military in Africa

National Research Council Canada - National Science Library

ploch, Lauren

2007-01-01

.... national security objectives in Africa and in its surrounding waters. U.S. military involvement on the continent is currently divided among three commands: European Command (EUCOM), Central Command (CENTCOM...

U.S. Strategic Command Chief Talks Deterrence, Partnerships During Latest SGL

OpenAIRE

Ochoa, Victoria

2017-01-01

Today@NPS The Naval Postgraduate School (NPS) welcomed U.S. Air Force Gen. John E. Hyten, Commander, U.S. Strategic Command (USSTRATCOM), for its latest Secretary of the Navy Guest Lecture (SGL), May 18 in King Auditorium. Hyten spoke about the importance of maintaining strategic deterrence and NPS' inclusion into the USSTRATCOM's Academic Alliance.

Command and Control in Littoral Operations

Science.gov (United States)

2016-05-13

at the graphics on the wall displaying the position of the various forces under his command. Only a few of his 14 ships were in formation with him...Mainz, 2d MEB Lead Planner (November 11, 2014). Moskowitz, Michael, and Nolan Noble. Dawn Blitz 2015- Observations and Analysis. Exercise

American Joint Helicopter Command: Addressing a Lack of Operational Control of Rotary Assets

National Research Council Canada - National Science Library

Marsowicz, Brandon

2007-01-01

... to achieve unity of effort. Based on the tenets of operational command and control by Milan Vego, across all services, the United States helicopter forces fare lacking operational command and control...

Effect of DMDF on the PM emission from a turbo-charged diesel engine with DDOC and DPOC

International Nuclear Information System (INIS)

Geng, Peng; Yao, Chunde; Wang, Quangang; Wei, Lijiang; Liu, Junheng; Pan, Wang; Han, Guopeng

2015-01-01

Highlights: • A new technical route on the reductions of smoke emissions and PM was introduced. • Smoke emissions and PM from turbo-charged diesel engine with DMDF were measured. • Interior relation on dry-soot, smoke opacity and PM was analyzed. • Effects of DMDF, DDOC and DPOC on smoke emissions and PM were investigated. • Particle number and mass concentrations and size contribution with DMDF were realized. - Abstract: This study is aimed to investigate the combined application of diesel methanol dual fuel (DMDF) and a simple after-treatment for reducing particulate matter (PM) emissions of a diesel engine. The effects of DMDF, a double diesel oxidation catalyst (DDOC) and a DOC closely coupled with a particulate oxidation catalyst (POC) in series (DPOC) on smoke emissions, particulate mass and number concentrations and size distributions were analyzed. Tests were conducted on a 4-cylinder turbo-charged, inter-cooling, mechanical in-line fuel injection pump diesel engine modified to DMDF combustion mode. Testing results showed that, before the DDOC and the DPOC, the dry-soot and smoke opacity efficiency decreases with the increase of substitution ratio of methanol at high engine load. There is a significant decrease of smoke opacity in DMDF mode after the DDOC, while the DPOC has a significant effect on the reduction in dry-soot emission. There is an average reduction in dry-soot by 25% in pure diesel fuel mode after the DDOC, while in DMDF mode, the average reduction is more than 60%, and the maximum reduction in dry-soot is up to 96%. There is a slightly reduction in PM emissions at low substitution ratio of methanol, while the high substitution ratio of methanol leads to more reduction in PM emissions. After the DDOC and the DPOC, particulate number and mass concentrations, especially nuclear particles, can be significantly reduced when the exhaust gas temperature is enough high

Recommendations on Future Operational Environments Command Control and Cyber Security

OpenAIRE

Goztepe, Kerim

2015-01-01

It is a well-known fact that today a nation's telecommunication networks, critical infrastructure, and information systems are vulnerable to growing number of attacks in cyberspace. Cyber space contains very different problems involving various sets of threats, targets and costs. Cyber security is not only problem of banking, communication or transportation. It also threatens core systems of army as command control. Some significant recommendations on command control (C2) and cyber security h...

A study of personality of leader and style of his co-operation in sporting command

Directory of Open Access Journals (Sweden)

Smolar I.I.

2012-12-01

Full Text Available The personality features of leader of sporting command and style of his co-operation are considered. The problems of adjusting and optimization of co-operation of leader and other players of command are selected in achievement of the set team purpose. 37 skilled sportsmen-handballers took part in research. An informal structure is exposed in commands, leaders and followers are certain. The quantitative indexes of personality features of leader, follower of sporting command are certain. Style of co-operation of leader and follower (prevailing and goodwill and quality is exposed personalities which will be realized by them in a sporting command. It is set that in interpersonality co-operation a leader will realize dominant style, and follower equal will realize dominant and benevolent styles.

PEACEKEEPING OPERATIONS MANAGEMENT. AN ANALYSIS OF CHALLENGES, CHANGES IN COMMAND ACTION AND TRAINING NEEDS

Directory of Open Access Journals (Sweden)

Ünsal SIĞRI

2015-10-01

Full Text Available The aim of this paper is to uncover emerging challenges of peacekeeping operations, determine the changes in command actions and its effects on the professional preparation of commanders by analyzing experiences of military officers. To that end the research data were collected by means of structured face-to- face interviews with voluntary participation of fourteen officers, who took charge in various peacekeeping operations. The collected data were analyzed based on the content analysis method. Findings indicate that peacekeeping operations pose specific challenges for peacekeepers, necessitate changes in command action in terms of flexibility and new precautions in terms of preparation of commanders.

Three dimensional visualization to support command and control

International Nuclear Information System (INIS)

Van Slambrook, G.A.

1997-04-01

Virtual reality concepts are changing the way one thinks about and with computers. The concepts have already proven their potential usefulness in a broad range of applications. This research was concerned with exploring and demonstrating the utility of virtual reality in robotics and satellite command and control applications. The robotics work addressed the need to quickly build accurate graphical models of physical environments by allowing a user to interactively build a model of a remote environment by superimposing stereo graphics onto live stereo video. The satellite work addressed the fusion of multiple data sets or models into one synergistic display for more effective training, design, and command and control of satellite systems

75 FR 67695 - U.S. Strategic Command Strategic Advisory Group Closed Meeting

Science.gov (United States)

2010-11-03

..., intelligence, and policy-related issues to the Commander, U.S. Strategic Command, during the development of the... Stockpile Assessment, Weapons of Mass Destruction, Intelligence Operations, Cyber Operations, Global Strike... these statements must be submitted no later than five business days prior to the meeting in question...

Two Approaches to Developing a Multi-Agent System for Battle Command Simulation

NARCIS (Netherlands)

Løvlid, R.A.; Alstad, A.; Mevassvik, O.M.; Reus, N.M. de; Henderson, H.C.; Vecht, B.van der; Luik, T.T.

2013-01-01

In the military, Command and Control Information Systems (C2ISs) are used for issuing commands to subordinate units. In training or decision support, simulations are used instead of live military forces. The Coalition Battle Management Language (C-BML) is currently being developed as an interface

Commande floue adaptative directe stable étendue appliquée à la ...

African Journals Online (AJOL)

Administrateur

... Machine asynchrone- Systèmes flous- Commande par logique floue- Commande adaptative- lois adaptative floue- analyse de stabilité- fonction de Lyapunov. Abstract. Today, as a result of significant progress in thearea of control of electrical machines, new techniques and approaches have emerged. In order nonlinear ...

Automated constraint checking of spacecraft command sequences

Science.gov (United States)

Horvath, Joan C.; Alkalaj, Leon J.; Schneider, Karl M.; Spitale, Joseph M.; Le, Dang

1995-01-01

Robotic spacecraft are controlled by onboard sets of commands called "sequences." Determining that sequences will have the desired effect on the spacecraft can be expensive in terms of both labor and computer coding time, with different particular costs for different types of spacecraft. Specification languages and appropriate user interface to the languages can be used to make the most effective use of engineering validation time. This paper describes one specification and verification environment ("SAVE") designed for validating that command sequences have not violated any flight rules. This SAVE system was subsequently adapted for flight use on the TOPEX/Poseidon spacecraft. The relationship of this work to rule-based artificial intelligence and to other specification techniques is discussed, as well as the issues that arise in the transfer of technology from a research prototype to a full flight system.

On Preparing for Squadron Command

Science.gov (United States)

1988-04-01

Gortler, Majur Gordon D. "Management Development---Could the Air Force Be Doing More?" Resear,;h Study, Air Command and Staff College. 1 07:3. 20...ABSTRACT (Continue on reverse If necessary and identify by block number) -This study addresses the broad issue of preparing Air Force officers for...are obsolete. SECURITY CLASSIFICATION OF THIS PAGE UNCLASSIFIED - - PREFACE This study addresses the broad Issue of preparing Air Force officers to

Environmental Licensing: an Instrument of Command and Control by Exception?

OpenAIRE

Sleman Chams, Juliette; Gestión Ambiental de la Corporación Autónoma Regional del Atlántico-CRA, autoridad ambiental del Departamento del Atlántico,; Velásquez Muñoz, Carlos Javier; Universidad del Norte (Barranquilla)

2016-01-01

This article analyzes the situation of the most important instrument of command and control existing in the Colombian environmental legislation: the environmental license. Since its first formal regulation, on behalf of Decree 1753 of August 3, 1994, has received several modifications which, apparently, have made, in spite of its importance, in an instrument of command and control by exception. The article revises on the scope of each of the modifications and the justifications put forward by...

The Road to a New Unified Command

Science.gov (United States)

2008-01-01

The Directorate of Command, Control, Communications, and Computers (C4) Systems is chartered with information architecture (including in Africa...Friday afternoon cinema presentations where a documentary or feature film covering an African historic event was played, followed by dialogue

Development of the Macro Command Editing Executive System for Factory Workers-Oriented Programless Visual Inspection System

Science.gov (United States)

Anezaki, Takashi; Wakitani, Kouichi; Nakamura, Masatoshi; Kubo, Hiroyasu

Because visual inspection systems are difficult to tune, they create many problems for the kaizen process. This results in increased development costs and time to assure that the inspection systems function properly. In order to improve inspection system development, we designed an easy-tuning system called a “Program-less” visual inspection system. The ROI macro command which consisted of eight kinds of shape recognition macro commands and decision, operation, control commands was built. Furthermore, the macro command editing executive system was developed by the operation of only the GUI without editing source program. The validity of the ROI macro command was proved by the application of 488 places.

Considerations on command and response language features for a network of heterogeneous autonomous computers

Science.gov (United States)

Engelberg, N.; Shaw, C., III

1984-01-01

The design of a uniform command language to be used in a local area network of heterogeneous, autonomous nodes is considered. After examining the major characteristics of such a network, and after considering the profile of a scientist using the computers on the net as an investigative aid, a set of reasonable requirements for the command language are derived. Taking into account the possible inefficiencies in implementing a guest-layered network operating system and command language on a heterogeneous net, the authors examine command language naming, process/procedure invocation, parameter acquisition, help and response facilities, and other features found in single-node command languages, and conclude that some features may extend simply to the network case, others extend after some restrictions are imposed, and still others require modifications. In addition, it is noted that some requirements considered reasonable (user accounting reports, for example) demand further study before they can be efficiently implemented on a network of the sort described.

Teaching Bibliometric Analysis and MS/DOS Commands.

Science.gov (United States)

Dou, Henri; And Others

1988-01-01

Outlines the steps involved in bibliometric studies, and demonstrates the ability to execute simple studies on microcomputers by downloading files using only the capability of MS/DOS. Detailed illustrations of the MS/DOS commands used are provided. (eight references) (CLB)

[Network Design of the Spaceport Command and Control System

Science.gov (United States)

Teijeiro, Antonio

2017-01-01

I helped the Launch Control System (LCS) hardware team sustain the network design of the Spaceport Command and Control System. I wrote the procedure that will be used to satisfy an official hardware test for the hardware carrying data from the Launch Vehicle. I installed hardware and updated design documents in support of the ongoing development of the Spaceport Command and Control System and applied firewall experience I gained during my spring 2017 semester to inspect and create firewall security policies as requested. Finally, I completed several online courses concerning networking fundamentals and Unix operating systems.

Commande adaptive d'une machine asynchrone

Science.gov (United States)

Slama-Belkhodja, I.; de Fornel, B.

1996-06-01

The paper deals with an indirect self-tuning speed control for an induction motor supplied by a chopper-filter-inverter system. Input/Output models are identified with the recursive least squares algorithm and the controller adaptation is based on a pole assignement strategy. Emphasis is put on the evaluation of the parameter identification in order to avoid instabilities because of disturbances or insufficient excitations. This is especially of importance when the adaptive control is carried out in closed loop systems and without additional test signals. Simulation results show the improvement of the dynamic responses and the robustness against load variations or parameters variations (rotor resistance, inertia). Cat article décrit une stratégie de commande adaptive indirecte à Placement de Pôles (PP), appliquée à la commande en vitesse d'une machine asynchrone alimentée par un ensemble hacheur-filtre-onduleur de tension. L'algorithme des Moindres Carrés Récursifs (MCR) est utilisé pour l'identification des modèles de comportement type entrées/sorties. Un intérêt particulier est porté à la mise en oeuvre de cet algorithme et à la discussion de ses résultats, tenant compte des erreurs de modélisation et de la nature peu riche en excitations des entrées du processus. Différents régimes transitoires ont été simulés pour apprécier l'apport de cette association (MCR-PP) : démarrages et inversion des sens de rotation, à vide et en charges, applications d'échelons de couple résistant, variations paramétriques. Les résultats permettent d'illustrer, tant au niveau des performances que de la robustesse, l'apport d'une telle commande adaptive pour des entraînements électriques avec une machine asynchrone.

US Navy Transfers Research Vessel to Philippine Navy > U.S. Pacific Command

Science.gov (United States)

, 2016 EMAIL PRINT Photos 1 of 1 SAN DIEGO (April 27, 2016) - Vice Adm. Nora Tyson, left, commander of Philippines oceanographic research and study capabilities. SAN DIEGO (April 27, 2016) - Vice Adm. Nora Tyson part in that relationship," said Vice Adm. Nora Tyson, commander, U.S. 3rd Fleet. "Today, we

Usefulness of turbo spin-echo MR imaging in meniscal tears of the knee

International Nuclear Information System (INIS)

Jeong, Gun Young; Choi, Chang Lak; Chung, Jin Young; Han, Tae Il; Jang, Hong Im; Kim, Ji Min; Han, Hyun Young; Song, Mun Kab; Yang, Chang Kyu

1998-01-01

To evaluate the usefulness and diagnostic accuracy of turbo spin-echo(TSE) proton-density and T2-weighted images of meniscal tears of the knee. We retrospectively evaluated the sensitivity, specificity, and accuracy of TSE proton density and T2-weighted images of meniscal tears confirmed arthroscopically or surgically in 47 patients(98 menisci). The routine TSE parameters used in all patients were the dual echo sequence with sagittal proton density and T2-weighed images(4000/16, 90/5/2 [TR/effectiveTE/ETL/NEX]), and fat-suppressed coronal proton density and T2-weighted images. The chi-square test was used for statistical analysis. The sensitivity, specificity, and accuracy of TSE proton density images for the detection of meniscal tears were 93.9%, 93.8%, and 93.9%, respectively, in the medial meniscus, and 92.9%, 91.4%, and 91.8% in the lateral. On T2-weighted images the corresponding figures were 87.9%, 8%, and 89.8%, respectively, in the medial meniscus, and 64.3%, 91.4%, and 83.7% in the lateral. With regard to sensitivity and accuracy, TSE proton density images of meniscal tears were superior to TSE T2-weighted images.=20

CFD Study of Turbo-Ramjet Interactions in Hypersonic Airbreathing Propulsion System

Science.gov (United States)

Chang, Ing; Hunter, Louis G.

1996-01-01

Advanced airbreathing propulsion systems used in Mach 4-6 mission scenarios, usually involve turbo-ramjet configurations. As the engines transition from turbojet to ramjet, there is an operational envelope where both engines operate simultaneously. In the first phase of our study, an over/under nozzle configuration was analyzed. The two plumes from the turbojet and ramjet interact at the end of a common 2-D cowl, where they both reach an approximate Mach 3.0 condition and then jointly expand to Mach 3.6 at the common nozzle exit plane. For the problem analyzed, the turbojet engine operates at a higher nozzle pressure ratio than the ramjet, causes the turbojet plume overpowers the ramjet plume, deflecting it approximately 12 degrees downward and in turn the turbojet plume is deflected 6 degrees upward. In the process, shocks were formed at the deflections and a shear layer formed at the confluence of the two jets. This particular case was experimentally tested and the data were used to compare with a computational fluid dynamics (CFD) study using the PARC2D code. The CFD results were in good agreement with both static pressure distributions on the cowl separator and on nozzle walls. The thrust coefficients were also in reasonable agreement. In addition, inviscid relationships were developed around the confluence point, where the two exhaust jets meet, and these results compared favorably with the CFD results. In the second phase of our study, a 3-D CFD solution was generated to compare with the 2-D solution. The major difference between the 2-D and 3-D solutions was the interaction of the shock waves, generated by the plume interactions, on the sidewall. When a shock wave interacts with a sidewall and sidewall boundary layer, it is called a glancing shock sidewall interaction. These interactions entrain boundary layer flow down the shockline into a vortical flow pattern. The 3-D plots show the streamlines being entrained down the shockline. The pressure of the flow

Scenario design : adaptive architecture for command and control experiment eight

OpenAIRE

Clark, Frankie J.

2002-01-01

Approved for public release; distribution is unlimited. The Adaptive Architectures for Command and Control (A2C2) project is an ongoing research effort sponsored by the Office of Naval Research to explore adaptation in joint command and control. The objective of the project's eighth experiment is to study the adjustments that organizations make when they are confronted with a scenario for which their organizational is ill-suited. To accomplish this, teams will each be in one of two fundame...

SciBox, an end-to-end automated science planning and commanding system

Science.gov (United States)

Choo, Teck H.; Murchie, Scott L.; Bedini, Peter D.; Steele, R. Josh; Skura, Joseph P.; Nguyen, Lillian; Nair, Hari; Lucks, Michael; Berman, Alice F.; McGovern, James A.; Turner, F. Scott

2014-01-01

SciBox is a new technology for planning and commanding science operations for Earth-orbital and planetary space missions. It has been incrementally developed since 2001 and demonstrated on several spaceflight projects. The technology has matured to the point that it is now being used to plan and command all orbital science operations for the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission to Mercury. SciBox encompasses the derivation of observing sequences from science objectives, the scheduling of those sequences, the generation of spacecraft and instrument commands, and the validation of those commands prior to uploading to the spacecraft. Although the process is automated, science and observing requirements are incorporated at each step by a series of rules and parameters to optimize observing opportunities, which are tested and validated through simulation and review. Except for limited special operations and tests, there is no manual scheduling of observations or construction of command sequences. SciBox reduces the lead time for operations planning by shortening the time-consuming coordination process, reduces cost by automating the labor-intensive processes of human-in-the-loop adjudication of observing priorities, reduces operations risk by systematically checking constraints, and maximizes science return by fully evaluating the trade space of observing opportunities to meet MESSENGER science priorities within spacecraft recorder, downlink, scheduling, and orbital-geometry constraints.

Influence of engine speed and the course of the fuel injection characteristics on forming the average combustion temperature in the cylinder of turbo diesel engine

Directory of Open Access Journals (Sweden)

Piotr GUSTOF

2007-01-01

Full Text Available Average combustion temperatures inside a turbo diesel engine for the same load and the same total doze of fuel for two rotational speeds: 2004 [rpm] and 4250 [rpm] are presented in this paper. The aim of this work is also the evaluation of the influence of the temporary course of the fuel injection characteristics on forming temperature in theengine cylinder space for these temperatures. The calculations were carried out by means of two zone combustion model.

Command History. 1968. Volume 1. Sanitized.

Science.gov (United States)

1968-01-01

battalions. Additionally, a diary captured on 19 December, Z1 kilometers southwest of Song Cau, revealed that on 19 November the author. a cadre member...the 306th and 312th ( AYA 308th) Bns. This reorga- nization was an apparent attempt by the headquarters of MR 3 to tighten its command and con- trol. (C

Future command and control systems should combine decision support and personalization interface features

NARCIS (Netherlands)

Streefkerk, J.W.; Smets, N.; Varkevisser, M.; Hiemstra-Van Mastrigt, S.

2014-01-01

On future battlefields, increasingly more sensor information will become available for military commanders to support mission execution. To improve (shared) situational awareness, decision-making and communication in face of this increased amount of information, the design of command and control

Software and commands on VAX CERN. User's guide

International Nuclear Information System (INIS)

Balashov, V.K.; Trofimov, V.V.

1990-01-01

This guide describes a structure of applications software, which is available at VAX-type computers in JINR. The software includes program libraries, scientific programs and commands developed at CERN. 20 refs

Religious Expression or Religious Coercion: Commanders Caught in the Cross-Fire

Science.gov (United States)

2010-02-17

ministers as chaplains with a rank of captain and a salary of $20 per month. With this action , the American government officially established the military...leadership and chaplains resulting in Airmen’s insidious harm or ruin? Are they being unconstitutionally raped of religious rights? Are groups like...military’s hierarchal command structure bears careful scrutiny of any potential coercive action created by a commander sharing his or her faith. Military

Circuit of synchronous logic for the transmission of safety commands

International Nuclear Information System (INIS)

Uberschlag, J.

1969-01-01

The author reports the development of a control-command circuit for the transmission of binary commands related to the safety of nuclear reactors. He presents the main design criteria (operation safety, provided safety level, flexibility, technical adaptation), the definition of the operation principle (inputs, logical outputs), the properties of a logic system. He evokes redundancy issues, and presents the system structure, proposes a possible sketch of the logic circuit. He describes the possible options for intermediate circuits and logic outputs, and tests to be performed

Trust: The Key to the Success of Mission Command in the Joint Force

Science.gov (United States)

2015-05-18

Malaysia , Kuala Lumpur: International Conference on ISO9000. Schmidt, Todd A. “Design, Mission Command and the Network: Enabling Organization...trust.pdf. Steele , Dennis. “Setting the Azimuth for Joint Force 2020: Globally Integrated Operations and Mission Command.” Army Magazine, November

NET: an inter-computer file transfer command

International Nuclear Information System (INIS)

Burris, R.D.

1978-05-01

The NET command was defined and supported in order to facilitate file transfer between computers. Among the goals of the implementation were greatest possible ease of use, maximum power (i.e., support of a diversity of equipment and operations), and protection of the operating system

APOLLO 11 COMMANDER NEIL ARMSTRONG IN SIMULATOR

Science.gov (United States)

1969-01-01

Apollo 11 commander Neil Armstrong is going through flight training in the lunar module simulator situated in the flight crew training building at KSC. Armstrong will pilot the lunar module to a moon landing on July 20, following launch from KSC on July 16.

Centrically reordered inversion recovery half-Fourier single-shot turbo spin-echo sequence: improvement of the image quality of oxygen-enhanced MRI

International Nuclear Information System (INIS)

Ohno, Yoshiharu; Hatabu, Hiroto; Higashino, Takanori; Kawamitsu, Hideaki; Watanabe, Hirokazu; Takenaka, Daisuke; Cauteren, Marc van; Sugimura, Kazuro

2004-01-01

Purpose: The purpose of the study presented here was to determine the improvement in image quality of oxygen-enhanced magnetic resonance (MR) subtraction imaging obtained with a centrically reordered inversion recovery half-Fourier single-shot turbo spin-echo (c-IR-HASTE) sequence compared with that obtained with a conventional sequentially reordered inversion recovery single-shot HASTE (s-IR-HASTE) sequence for pulmonary imaging. Materials and methods: Oxygen-enhanced MR imaging using a 1.5 T whole body scanner was performed on 12 healthy, non-smoking volunteers. Oxygen-enhanced MR images were obtained with the coronal two-dimensional (2D) c-IR-HASTE sequence and 2D s-IR-HASTE sequence combined with respiratory triggering. For a 256x256 matrix, 132 phase-encoding steps were acquired including four steps for phase correction. Inter-echo spacing for each sequence was 4.0 ms. The effective echo time (TE) for c-IR-HASTE was 4.0 ms, and 16 ms for s-IR-HASTE. The inversion time (TI) was 900 ms. To determine the improvement in oxygen-enhanced MR subtraction imaging by c-IR-HASTE, CNRs of subtraction image, overall image quality, and image degradation of the c-IR-HASTE and s-IR-HASTE techniques were statistically compared. Results: CNR, overall image quality, and image degradation of c-IR-HASTE images showed significant improvement compared to those s-IR-HASTE images (P<0.05). Conclusion: Centrically reordered inversion recovery half-Fourier single-shot turbo spin-echo (c-IR-HASTE) sequence enhanced the signal from the lung and improved the image quality of oxygen-enhanced MR subtraction imaging

An incident command system in practice and reality

International Nuclear Information System (INIS)

Spitzer, J.D.

1992-01-01

The basic organizational problems and options for forming a pollution response organization are described. Problems with multi-agency response organizations include poor coordination and lack of accountability. Alternatives to autonomous organizations operating with minimal coordination are the multi-agency/organization teams working under a controlling organization, and organizations formed into a single response organization (the incident command system or ICS). Design criteria for an ICS include flexibility as to the jurisdiction and agency, adaptable organizational structure, capability to expand in a logical manner, and uniform elements in terminology, organization, and procedures. ICS in practice is illustrated both by the CANUSLAK exercise undertaken in August 1990 and a real incident that occurred several days after the exercise was finished. CANUSLAK involved the US Coast Guard and its Canadian and Michigan counterparts in a simulated incident in the St. Clair river. The real incident was the explosion of the gasoline-carrying tank vessel Jupiter in the Saginaw River. In both instances, ICS combined many organizations into one team with a single incident commander. The eight basic components of ICS are common terminology, modular organization, integrated communications, unified command structure, consolidated action plan, manageable span of control, designated incident facilities, and comprehensive resource management. ICS has been tailored to a wide range of applications and is not only used in major disasters but as a part of routine operations. 18 refs., 5 figs

Receiver Operator Characteristic Tools Graphic User Interface Extension for R Commander

Directory of Open Access Journals (Sweden)

Daniel Corneliu LEUCUŢA

2015-12-01

Full Text Available Background: Receiver Operator Characteristic (ROC curve, is a graphical plot which presents the performance of a binary classifier when the discrimination cutoff is varied. The aim of this work was to create an extension for R Commander that offers a graphical user interface for Receiver Operator Characteristic tools provided by several existing command line accessible packages like pROC and ROCR. Material and Methods: The extension was built and tested with R version 3.2.0 and R Commander 2.1-7. Results: We built an extension called RcmdrPlugin.ROC that we uploaded on the CRAN servers. The extension adds a new menu called ROC, along with two submenus pROC and ROCR that broadly corresponds to commands available to access the functions of these packages. The pROC menu offers several commands: to plot a ROC curve for a dataset or for a logistic regression model, to compare paired and unpaired ROC curves, each providing the following tabs: General (to select the variables for the analysis, and options for switching cases with controls; Smoothing (allowing the user to select different types of smoothing – binominal, density, distributions like normal, lognormal, ...; AUC (to specify the partial area under the curve (AUC options, CI (to select the options of confidence intervals (CI – the level, computing method: DeLong, bootstrap, ...; Plot (for the plotting options. The ROCR dialogue window offers more options in choosing the performance measures for the plot. Conclusion: The RcmdrPlugin.ROC extension helps less advanced users of R accessing ROC tools in a friendly graphical user interface.

Commande floue adaptative directe stable étendue appliquée à la ...

African Journals Online (AJOL)

Administrateur

Commande floue adaptative directe stable étendue appliquée à la machine asynchrone. Stable direct adaptive fuzzy control extended applied to the asynchronous machine. Malika Fodil. 1. , Said Barkat. 1 et Djamel Boukhetala. 2. 1Université de M'sila, BP 166, rue Ichbillia, M'sila, Algérie. 2Laboratoire de Commande des ...

Gesture Commanding of a Robot with EVA Gloves

Data.gov (United States)

National Aeronautics and Space Administration — Gestures commands allow a human operator to directly interact with a robot without the use of intermediary hand controllers. There are two main types of hand gesture...

Cognitive Systems Modeling and Analysis of Command and Control Systems

Science.gov (United States)

Norlander, Arne

2012-01-01

Military operations, counter-terrorism operations and emergency response often oblige operators and commanders to operate within distributed organizations and systems for safe and effective mission accomplishment. Tactical commanders and operators frequently encounter violent threats and critical demands on cognitive capacity and reaction time. In the future they will make decisions in situations where operational and system characteristics are highly dynamic and non-linear, i.e. minor events, decisions or actions may have serious and irreversible consequences for the entire mission. Commanders and other decision makers must manage true real time properties at all levels; individual operators, stand-alone technical systems, higher-order integrated human-machine systems and joint operations forces alike. Coping with these conditions in performance assessment, system development and operational testing is a challenge for both practitioners and researchers. This paper reports on research from which the results led to a breakthrough: An integrated approach to information-centered systems analysis to support future command and control systems research development. This approach integrates several areas of research into a coherent framework, Action Control Theory (ACT). It comprises measurement techniques and methodological advances that facilitate a more accurate and deeper understanding of the operational environment, its agents, actors and effectors, generating new and updated models. This in turn generates theoretical advances. Some good examples of successful approaches are found in the research areas of cognitive systems engineering, systems theory, and psychophysiology, and in the fields of dynamic, distributed decision making and naturalistic decision making.

APOLLO 16 COMMANDER JOHN YOUNG ENTERS ALTITUDE CHAMBER FOR TESTS

Science.gov (United States)

1971-01-01

Apollo 16 commander John W. Young prepares to enter the lunar module in an altitude chamber in the Manned Spacecraft Operations Building at the spaceport prior to an altitude run. During the altitude run, in which Apollo 16 lunar module pilot Charles M. Duke also participated, the chamber was pumped down to simulate pressure at an altitude in excess of 200,000 feet. Young, Duke and command module pilot Thomas K. Mattingly II, are training at the Kennedy Space Center for the Apollo 16 mission. Launch is scheduled from Pad 39A, March 17, 1972.

A database application for the Naval Command Physical Readiness Testing Program

OpenAIRE

Quinones, Frances M.

1998-01-01

Approved for public release; distribution is unlimited 1T21 envisions a Navy with tandardized, state-of-art computer systems. Based on this vision, Naval database management systems will also need to become standardized among Naval commands. Today most commercial off the shelf (COTS) database management systems provide a graphical user interface. Among the many Naval database systems currently in use, the Navy's Physical Readiness Program database has continued to exist at the command leve...

Analysis of Recruit Attrition from the Navy's Delayed Entry Program and Recruit Training Command

National Research Council Canada - National Science Library

Neuhalfen, Jon K

2007-01-01

.... The analysis uses the PRIDE database, provided by Commander, Navy Recruiting Command. Trend analyses are used to identify significant changes in enlistment and attrition behavior for recruits who joined from fiscal years 1998 through 2005...

Full Spectrum Operations: An Analysis of Course Content at the Command and General Staff College

National Research Council Canada - National Science Library

Turner, II, Frank L

2008-01-01

.... This monograph examined the Intermediate Level Education, the Advanced Military Studies Program, and the Tactical Commanders Development Program curricula at the Command and General Staff College...

Command and Control : faster decisions

CSIR Research Space (South Africa)

Venter, C

2012-10-01

Full Text Available Decisions 4th Biennial Conference Presented by Cobus Venter 10 October 2012 ? CSIR 2012 Slide 2 Command and Control Planning TaskingControl Assessment Si tu at io n DPSS Objective Ends Increase the Defence Capability of South Africa Ways... Supported by SAAB THALES Global CommsDPSS DDSI ERGOTECH Cooperation to make it work Example 1: Future SA Army Strategy and Joint Operations Support Campus Experiment Example 1: Future SA Army Strategy and Joint Operations Support Campus Experiment...

Economics of paternalism: the hidden costs of self-commanding strategies

Directory of Open Access Journals (Sweden)

Christophe Salvat

2015-11-01

Full Text Available The paper proposes an economic assessment of paternalism by comparing different alternative responses to dynamically inconsistent behaviors consecutive to hyperbolic discounting. Two main types of action are possible, self-commanding strategies and paternalism The first category includes personal rules and pre-commitment The second can be subcategorized between coercive and non-coercive forms of paternalism, which are respectively associated (although it is debatable with legal paternalism and with ‘nudges’. Despite being self-inflicted, self-commanding strategies are actually not cost free and can result in a dramatic cutback of people’s freedom of choice. Likewise, legal paternalism can, on occasion, be less harmful than personal rules or pre-commitment; similarly, nudges can be more invasive and less effective than their proponents want us to believe. The aim of this paper is not to propose any standardized form of response to irrational behavior (whatever that may mean but to argue, on the contrary, that every case should be individually appraised. Individual situations can be remedied by self-commanding strategies or by paternalistic policies, either in isolation or in combination.

Tactical Command and Control in the Combined Arms Battalion Task Force,

Science.gov (United States)

1988-03-08

described as [ •follows. -.. Acquire information in the basic categories of mission, enemy, terrain, and troops available on a * continual basis through a...became the basic unit." 55 A study by Dr. Gabel describes a wide range of organizational and -*"" control structures which were ultimately used to...FreLelonolSystell each orce evel Commander * Procedures/acioa otrlS a / eCommunication $ 0’ Automation/// _. Other Notion’$ Command *e Facilities ’/ a nd Control

A self-learning rule base for command following in dynamical systems

Science.gov (United States)

Tsai, Wei K.; Lee, Hon-Mun; Parlos, Alexander

1992-01-01

In this paper, a self-learning Rule Base for command following in dynamical systems is presented. The learning is accomplished though reinforcement learning using an associative memory called SAM. The main advantage of SAM is that it is a function approximator with explicit storage of training samples. A learning algorithm patterned after the dynamic programming is proposed. Two artificially created, unstable dynamical systems are used for testing, and the Rule Base was used to generate a feedback control to improve the command following ability of the otherwise uncontrolled systems. The numerical results are very encouraging. The controlled systems exhibit a more stable behavior and a better capability to follow reference commands. The rules resulting from the reinforcement learning are explicitly stored and they can be modified or augmented by human experts. Due to overlapping storage scheme of SAM, the stored rules are similar to fuzzy rules.

Command and Control for Distributed Lethality

Science.gov (United States)

2017-06-01

extended communications between the AFP CDR and the CCDR are required. As shown in Figure 20, the principle command relationships are between...frequency (RF) communications are limited by maximum antenna height of each surface platform without an airborne relay. LOS is estimated with an online ...documents the interconnections and relationship of information flow and the system requirements for maintaining the interconnection links during a

Advances in Discrete-Event Simulation for MSL Command Validation

Science.gov (United States)

Patrikalakis, Alexander; O'Reilly, Taifun

2013-01-01

In the last five years, the discrete event simulator, SEQuence GENerator (SEQGEN), developed at the Jet Propulsion Laboratory to plan deep-space missions, has greatly increased uplink operations capacity to deal with increasingly complicated missions. In this paper, we describe how the Mars Science Laboratory (MSL) project makes full use of an interpreted environment to simulate change in more than fifty thousand flight software parameters and conditional command sequences to predict the result of executing a conditional branch in a command sequence, and enable the ability to warn users whenever one or more simulated spacecraft states change in an unexpected manner. Using these new SEQGEN features, operators plan more activities in one sol than ever before.

Command and Control during Security Incidents/Emergencies

Energy Technology Data Exchange (ETDEWEB)

Knipper, W. [NSTec

2013-10-16

This presentation builds on our response to events that pose, or have the potential to pose, a serious security or law enforcement risk and must be responded to and controlled in a clear a decisive fashion. We will examine some common concepts in the command and control of security-centric events.

U.S. Special Operations Command Training and Education Program

National Research Council Canada - National Science Library

Gimble, Thomas

1996-01-01

.... Special Operations Command (USCINCSOC), to train assigned forces to meet special operations mission taskings and to ensure interoperability with conventional forces and other special operations forces (SOF...

Implementing UPDM to develop command and control systems

CSIR Research Space (South Africa)

Oosthuizen, R

2016-09-01

Full Text Available Systems engineering is an established approach to develop systems, including complex sociotechnical systems such as Command and Control (C2) Systems. These systems often occur through introduction of a new technology into an existing system...

Resistencia de Plasmodium falciparum a tres fármacos antimaláricos en Turbo (Antioquia, Colombia, 1998

Directory of Open Access Journals (Sweden)

Blair Silvia

2001-01-01

Full Text Available En 1998, se determinó in vivo e in vitro la frecuencia y el grado de resistencia de Plasmodium falciparum a los tres fármacos antimaláricos (cloroquina, amodiaquina y sulfadoxina/ pirimetamina más utilizados en el municipio de Turbo (zona de Urabá, Antioquia, Colombia en una muestra representativa de la población con malaria. Se realizaron análisis clínicos y parasitológicos durante 14 días según la prueba estándar recomendada por la Organización Mundial de la Salud. In vivo, P. falciparum mostró resistencia a la cloroquina, amodiaquina y sulfadoxina/pirimetamina con una frecuencia de 97, 7 y 13%, respectivamente; in vitro, las cifras correspondientes fueron de 21, 23 y 9%, respectivamente. La concordancia entre los resultados in vivo e in vitro fue de 23% para la cloroquina.

Artificial Intelligence Applied to the Command, Control, Communications, and Intelligence of the U.S. Central Command.

Science.gov (United States)

1983-06-06

these components will be presented. 4.17 °°,. CHAPTER III FOOTNOTES 1. Arron Barr and Edward A. Feigenbaum, eds., Te Handbook gf Artificial Inteligence ol...RD-R137 205 ARTIFICIAL INTELLIGENCE APPLIED TO THE COMIMAND CONTROL i/i COMMUNICATIONS RND..(U) ARMY WAR COLL CARLISLE BARRACKS U PA J N ENVART 06...appropriate mlitary servic or *swesmment aency. ARTIFICIAL INTELLIGENCE APPLIED TO THE COMMAND, CONTROL, COMMUNICATIONS, AND INTELLIGENCE OF THE U.S. CENTRAL

32 CFR 700.880 - Duties of the prospective commanding officer of a ship.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Duties of the prospective commanding officer of a ship. 700.880 Section 700.880 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY REGULATIONS AND OFFICIAL RECORDS UNITED STATES NAVY REGULATIONS AND OFFICIAL RECORDS The Commanding Officer Special...

When Contractors Deploy: A Guide for the Operational Commander

National Research Council Canada - National Science Library

Buhler, Carl

2000-01-01

.... Furthermore, this paper also lists four recommendations for operational commanders and the military on how to better integrate contractors into the military effort, especially during hostile combat situations...

Military Assistance Command, Vietnam: The Imperative of Pol-Mil Unity. ACSC Quick-Look 05-12

National Research Council Canada - National Science Library

Weaver, Michael

2005-01-01

...), when General William Westmoreland assumed command. The MAAG continued to assist the development of the South Vietnamese Armed Forces, but the command change fragmented its operational efforts among the MACV staff...

Command and Control Planning and Teamwork: Exploring the Future

National Research Council Canada - National Science Library

Sterling, Bruce S; Lickteig, Carl W

2000-01-01

.... This paper examines how participant ratings of command and control planning and observer assessments of teamwork were related in a series of futuristic missions conducted by the Mounted Maneuver...

From Sensory Space to Motor Commands: Lessons from Saccades

National Research Council Canada - National Science Library

Optican, L

2001-01-01

.... We conclude that intrinsic brain signals might represent non-physical signals, such as desired sensory states, approximate motor drives, and distributed motor commands, rather than physical signals (e.g...

Real-Time Observation of Platinum Redispersion on Ceria-Based Oxide by In-situ Turbo-XAS in Fluorescence Mode

International Nuclear Information System (INIS)

Nagai, Yasutaka; Dohmae, Kazuhiko; Tanabe, Toshitaka; Shinjoh, Hirofumi; Takagi, Nobuyuki; Ikeda, Yasuo; Guilera, Gemma; Pascarelli, Sakura; Newton, Mark; Matsumoto, Shin'ichi

2007-01-01

A real-time observation of the redispersion behavior of sintered Pt on ceria-based oxide was made possible by in-situ time-resolved Turbo-XAS in fluorescence mode. 2 wt% Pt/Ce-Zr-Y mixed oxide samples were prepared, and then treated under an aging condition. The average Pt particle size measured by CO absorption method after aging was 7 nm. Redispersion treatments of the previously aged catalyst were carried out at 600 deg. C within an in-situ XAS cell in a cyclical flow of reducing/oxidizing gases. Pt L3-edge XANES spectra were collected every 1.1 second under in-situ conditions. From a change in the XANES spectra, we observed that the Pt particle size of the aged catalyst decreased from 7 to 5 nm after 60 seconds and then to 3 nm after 1000 seconds

Usefulness of fluid attenuated inversion recovery(FLAIR) image in mesial temporal sclerosis : comparison with turbo spin-echo T2-weighted image

Energy Technology Data Exchange (ETDEWEB)

Son, Seok Hyun; Chang, Seung Kuk; Eun, Choong Ki [Pusan Paik Hospital, Inje Univ. College of Medicine, Kimhae (Korea, Republic of)

1999-12-01

To determine the usefulness of fluid attenuated inversion recovery(FLAIR) imaging for the in detection of high signal intensity of hippocampus or amygdala in mesial temporal sclerosis (MTS), compared with that of turbo spin-echo T2-weighted imaging. Two neuroradiologists independently analyzed randomly mixed MR images of 20 lesions of 17 patients in whom MTS had been diagnosed, and ten normal controls. All subjects underwent both who performed both FLAIR and turbo spin-echo T2-weighted imaging, in a blind fashion. In order to determine hippocampal morphology, oblique coronal images perpendicular to the long axis of the hippocampus were obtained. The detection rate of high signal intensity in hippocampus or amygdala, the radiologists' preferred imaging sequence, and intersubject consistency of detection were evaluated. Signal intensity in hippocampus or amygdala was considered high if substantially higher than signal intensity in the cortex of adjacent temporo-parietal lobe. In all normal controls, FLAIR and spin-echo T2-weighted images showed normal signal intensity in hippocampus or amygdala. In MTS, the mean detection rate of high signal intensity in hippocampus or amygdala, as seen on FLAIR images was 93%, compared with 43% on spin-echo T2-weighted images. In all cases in which signal intensity on FLAIR images was normal, signal intensity on spin-echo T2-weighted images was also normal. The radiologists preferred the contrast properties of FLAIR to those of spin-echo T2-weighted images. In the diagnosis of MTS using MRI, FLAIR images are more useful for the detection of high signal intensity of hippocampus or amygdala than are spin-echo T2-weighted images. In the diagnosis of MTS, FLAIR imaging is therefore a suitable alternative to spin-echo T2-weighted imaging.

Usefulness of fluid attenuated inversion recovery(FLAIR) image in mesial temporal sclerosis : comparison with turbo spin-echo T2-weighted image

International Nuclear Information System (INIS)

Son, Seok Hyun; Chang, Seung Kuk; Eun, Choong Ki

1999-01-01

To determine the usefulness of fluid attenuated inversion recovery(FLAIR) imaging for the in detection of high signal intensity of hippocampus or amygdala in mesial temporal sclerosis (MTS), compared with that of turbo spin-echo T2-weighted imaging. Two neuroradiologists independently analyzed randomly mixed MR images of 20 lesions of 17 patients in whom MTS had been diagnosed, and ten normal controls. All subjects underwent both who performed both FLAIR and turbo spin-echo T2-weighted imaging, in a blind fashion. In order to determine hippocampal morphology, oblique coronal images perpendicular to the long axis of the hippocampus were obtained. The detection rate of high signal intensity in hippocampus or amygdala, the radiologists' preferred imaging sequence, and intersubject consistency of detection were evaluated. Signal intensity in hippocampus or amygdala was considered high if substantially higher than signal intensity in the cortex of adjacent temporo-parietal lobe. In all normal controls, FLAIR and spin-echo T2-weighted images showed normal signal intensity in hippocampus or amygdala. In MTS, the mean detection rate of high signal intensity in hippocampus or amygdala, as seen on FLAIR images was 93%, compared with 43% on spin-echo T2-weighted images. In all cases in which signal intensity on FLAIR images was normal, signal intensity on spin-echo T2-weighted images was also normal. The radiologists preferred the contrast properties of FLAIR to those of spin-echo T2-weighted images. In the diagnosis of MTS using MRI, FLAIR images are more useful for the detection of high signal intensity of hippocampus or amygdala than are spin-echo T2-weighted images. In the diagnosis of MTS, FLAIR imaging is therefore a suitable alternative to spin-echo T2-weighted imaging

Command and Control (C2) in Joint Operations: Separate Functions, their Purpose, and Application to Battle Command in the 2lst Century

National Research Council Canada - National Science Library

Hampton, David

1998-01-01

The command and control function at the operational level is the most important operations function because it ties together the other functions at all levels of war across the range of military operations...

Design and Implementation of the Automatic Assessment System for the Command and Control Specialty in Ships

Directory of Open Access Journals (Sweden)

Zhang Hao

2017-01-01

Full Text Available On the basis of analyzing the actual demand of automated assessment system for the command and control specialty in ships, the thought of the overall design of automated assessment system for the command and control specialty in ships is given, and the concrete realization methods of the user login module, test paper operation module and system maintenance module are studied and demonstrated. The proposed design idea and implementation method of automated assessment system for the command and control specialty in ships is scientific, efficient and practical, and provides reference for the exploitation of automated assessment system for the command and control specialty in ships.

STS-26 Commander Hauck in fixed based (FB) shuttle mission simulator (SMS)

Science.gov (United States)

1988-01-01

STS-26 Discovery, Orbiter Vehicle (OV) 103, Commander Frederick H. Hauck, wearing comunications kit assembly headset and seated in the commanders seat on forward flight deck, looks over his shoulder toward the aft flight deck. A flight data file (FDF) notebook rests on his lap. The STS-26 crew is training in the fixed base (FB) shuttle mission simulator (SMS) located in JSC Mission Simulation and Training Facility Bldg 5.

Commanding Generation Y: How Generation X Military Leaders Can Better Utilize Generational Tendencies

Science.gov (United States)

2013-03-21

generation ( Baby Boomers ). Although the profession of arms is a time-honored tradition steeped in discipline...senior leadership generational tendencies. Command; Leadership; Generation ; Baby Boomer ; Generation X; Generation Y Unclass Unclass Unclass UU 32 USMC...enable commanders to better lead Generation Y within the U.S. military. Discussion: Baby Boomers , Generation X, and Generation Y are

Plant Habitat Telemetry / Command Interface and E-MIST

Science.gov (United States)

Walker, Uriae M.

2013-01-01

Plant Habitat (PH) is an experiment to be taken to the International Space Station (ISS) in 2016. It is critical that ground support computers have the ability to uplink commands to control PH, and that ISS computers have the ability to downlink PH telemetry data to ground support. This necessitates communication software that can send, receive, and process, PH specific commands and telemetry. The objective of the Plant Habitat Telemetry/ Command Interface is to provide this communication software, and to couple it with an intuitive Graphical User Interface (GUI). Initial investigation of the project objective led to the decision that code be written in C++ because of its compatibility with existing source code infrastructures and robustness. Further investigation led to a determination that multiple Ethernet packet structures would need to be created to effectively transmit data. Setting a standard for packet structures would allow us to distinguish these packets that would range from command type packets to sub categories of telemetry packets. In order to handle this range of packet types, the conclusion was made to take an object-oriented programming approach which complemented our decision to use the C++ programming language. In addition, extensive utilization of port programming concepts was required to implement the core functionality of the communication software. Also, a concrete understanding of a packet processing software was required in order to put aU the components of ISS-to-Ground Support Equipment (GSE) communication together and complete the objective. A second project discussed in this paper is Exposing Microbes to the Stratosphere (EMIST). This project exposes microbes into the stratosphere to observe how they are impacted by atmospheric effects. This paper focuses on the electrical and software expectations of the project, specifically drafting the printed circuit board, and programming the on-board sensors. The Eagle Computer-Aided Drafting

Computer-assisted command and control for Chooz B

International Nuclear Information System (INIS)

Anon.

1995-01-01

A new type of command and control system has been installed at the Chooz B nuclear power plant. A key feature of the system is a man/machine interface designed to provide operators with on-screen assistance more quickly than ever. (Author)

Acquisition and Development of System Command (SYSCOM) Technical Manuals

National Research Council Canada - National Science Library

2003-01-01

... (NAVSEA) and Space and Naval Warfare Systems Command (SPAWAR). TMs are the primary information source for technical training, installation, operation, testing, maintenance, and repair associated with NAVSEA/SPAWAR systems or equipment...

FRONT COMMANDS IN WINTER OF 1917 IN COMBATING CRISIS OF FOOD SUPPLY TO FIELD FORCES

Directory of Open Access Journals (Sweden)

Максим Викторович Оськин

2015-12-01

Full Text Available This article considers the problem of food supply to the Eastern front in the winter of 1917 during World War I. In the conditions of the food supply crisis the military authorities managed to avoid the famine in the army. The Front Command and the Supreme Command took some measures to resolve this problem. Attracting extra workers for harvesting, clarity of the resources allocation, calculations of the government funds allocation- all these actions bolstered the army's efforts on the home front. A considerable role in this work was played by Emperor Nicholas II, who timely and positively reacted to the suggestions of the military commanders on the issue. Overall, the Russian military command coped with this problem in the conditions of the general crisis of supplies.

Implications of a Non-Unified Command System and the Need for a Unified Command System in Zambia

Science.gov (United States)

2015-06-12

aspects. It has been found that Zambia’s two attempts to unify its system happened during the one party participatory democracy era. Since the coming...and its Implication for Democracy ,” in Ourselves to Know: Civil Military Relations and Defence Transformation in Southern Africa, eds. Rocky Williams...adopted a multiparty system of government under the Movement for Multi-Party Democracy (MMD) which decided to revert to independent commands. As

STS-93 Commander Collins waves after suiting up before launch

Science.gov (United States)

1999-01-01

During final launch preparations in the Operations and Checkout Building, STS-93 Commander Eileen M. Collins waves after donning her launch and entry suit. After Space Shuttle Columbia's July 20 launch attempt was scrubbed at the T-7 second mark in the countdown, the launch was rescheduled for Thursday, July 22, at 12:28 a.m. EDT. The target landing date is July 26, 1999, at 11:24 p.m. EDT. STS-93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The new telescope is 20 to 50 times more sensitive than any previous X-ray telescope and is expected unlock the secrets of supernovae, quasars and black holes. The STS-93 crew numbers five: Commander Collins, Pilot Jeffrey S. Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

The on scene command and control system (OSC2) : an integrated incident command system (ICS) forms-database management system and oil spill trajectory and fates model

International Nuclear Information System (INIS)

Anderson, E.; Galagan, C.; Howlett, E.

1998-01-01

The On Scene Command and Control (OSC 2 ) system is an oil spill modeling tool which was developed to combine Incident Command System (ICS) forms, an underlying database, an integrated geographical information system (GIS) and an oil spill trajectory and fate model. The first use of the prototype OSC 2 system was at a PREP drill conducted at the U.S. Coast Guard Marine Safety Office, San Diego, in April 1998. The goal of the drill was to simulate a real-time response over a 36-hour period using the Unified Command System. The simulated spill was the result of a collision between two vessels inside San Diego Bay that caused the release of 2,000 barrels of fuel oil. The hardware component of the system which was tested included three notebook computers, two laser printers, and a poster printer. The field test was a success but it was not a rigorous test of the system's capabilities. The map display was useful in quickly setting up the ICS divisions and groups and in deploying resources. 6 refs., 1 tab., 5 figs

The Operations Intent and Effects Model: A Command and Control Methodology for Increased Automation

Science.gov (United States)

2013-06-01

Command and Control Process (Curts and Cambell , 2006), in that an order describes Actions that cause Effects. The Effects in turn change the Current...Interoperability Workshop. Orlando, FL, USA, IEEE CS Press. Curts, R. J., Dr. & Cambell , D. E., Dr. (2006) “Rethinking Command & Control”. Paper 005

Contrast-enhanced Magnetic Resonance Imaging of Pelvic Bone Metastases at 3.0 T: Comparison Between 3-dimensional T1-weighted CAIPIRINHA-VIBE Sequence and 2-dimensional T1-weighted Turbo Spin-Echo Sequence.

Science.gov (United States)

Yoon, Min A; Hong, Suk-Joo; Lee, Kyu-Chong; Lee, Chang Hee

2018-06-12

This study aimed to compare 3-dimensional T1-weighted gradient-echo sequence (CAIPIRINHA-volumetric interpolated breath-hold examination [VIBE]) with 2-dimensional T1-weighted turbo spin-echo sequence for contrast-enhanced magnetic resonance imaging (MRI) of pelvic bone metastases at 3.0 T. Thirty-one contrast-enhanced MRIs of pelvic bone metastases were included. Two contrast-enhanced sequences were evaluated for the following parameters: overall image quality, sharpness of pelvic bone, iliac vessel clarity, artifact severity, and conspicuity and edge sharpness of the smallest metastases. Quantitative analysis was performed by calculating signal-to-noise ratio and contrast-to-noise ratio of the smallest metastases. Significant differences between the 2 sequences were assessed. CAIPIRINHA-VIBE had higher scores for overall image quality, pelvic bone sharpness, iliac vessel clarity, and edge sharpness of the metastatic lesions, and had less artifacts (all P 0.05). Our results suggest that CAIPIRINHA-VIBE may be superior to turbo spin-echo for contrast-enhanced MRI of pelvic bone metastases at 3.0 T.

Using Arm and Hand Gestures to Command Robots during Stealth Operations

Science.gov (United States)

Stoica, Adrian; Assad, Chris; Wolf, Michael; You, Ki Sung; Pavone, Marco; Huntsberger, Terry; Iwashita, Yumi

2012-01-01

Command of support robots by the warfighter requires intuitive interfaces to quickly communicate high degree-of-freedom (DOF) information while leaving the hands unencumbered. Stealth operations rule out voice commands and vision-based gesture interpretation techniques, as they often entail silent operations at night or in other low visibility conditions. Targeted at using bio-signal inputs to set navigation and manipulation goals for the robot (say, simply by pointing), we developed a system based on an electromyography (EMG) "BioSleeve", a high density sensor array for robust, practical signal collection from forearm muscles. The EMG sensor array data is fused with inertial measurement unit (IMU) data. This paper describes the BioSleeve system and presents initial results of decoding robot commands from the EMG and IMU data using a BioSleeve prototype with up to sixteen bipolar surface EMG sensors. The BioSleeve is demonstrated on the recognition of static hand positions (e.g. palm facing front, fingers upwards) and on dynamic gestures (e.g. hand wave). In preliminary experiments, over 90% correct recognition was achieved on five static and nine dynamic gestures. We use the BioSleeve to control a team of five LANdroid robots in individual and group/squad behaviors. We define a gesture composition mechanism that allows the specification of complex robot behaviors with only a small vocabulary of gestures/commands, and we illustrate it with a set of complex orders.

Commandants' Managerial Capacity and Workers Productivity in ...

African Journals Online (AJOL)

The purpose of this study is to evaluate the commandant's managerial capacity as if relates to workers productivity with a view to determining whether their calling to the education terrain has been justified and to correct certain areas in need of improvement in the Nigeria Police Education set up. In doing this, the study took ...

Introduction to Command, Control and Communications (C3) through comparative case analysis

OpenAIRE

Berg, Scott A.

1990-01-01

Approved for public rerlease; distribution is unlimited This thesis contains material for the course, Introduction to Command, Control and Communications (C3). The first part of the thesis describes selected principles and concepts of C3 related to communication management, interoperability, command structure and standardization. The Crisis Action System is described emphasizing the roles and functions of the Joint Chiefs of Staff and the Office of the Secretary of Defense. A discussion of...

99th Regional Support Command Uses LED Lighting to Capture Significant Savings

Energy Technology Data Exchange (ETDEWEB)

None

2016-11-03

Case study describes how the Army Reserve 99th Regional Support Command (RSC) cut its energy consumption in half at the Support Command's Technical Sergeant Vernon McGarity Army Reserve Center by replacing more than 1,200 fluorescent troffers with 46 W and 61 W LED troffers with dimmers. The site achieved annual savings of more than 180,000 kWh and more than $20,000 in energy cost savings.

Operator-generated command language for computer control of Doublet III

International Nuclear Information System (INIS)

Drobnis, D.; Petersen, P.

1982-02-01

The Control System for Doublet III consists of a medium-sized minicomputer system, with several keyboards and color alphanumeric CRTs for interactive operator interface to a large distributed CAMAC I/O system. Under normal operating conditions, however, all of the sequential and decision-making operations necessary to prepare each tokamak shot are performed directly by the computer, executing a set of Procedures coded in a convenient command language. Most of these Procedures have been developed by the Doublet III operators themselves, and are maintained, altered, and augmented as required without programmer attention. In effect, the Procedures have become a high-level tokamak Command Language

Commander in chief : FDR's battle with Churchill, 1943

NARCIS (Netherlands)

Hamilton, Charles Nigel

2016-01-01

Commander in Chief is een deelbiografie van president Franklin Delano Roosevelt waarin Roosevelts rol als opperbevelhebber van de gewapende strijdkrachten van de Verenigde Staten in de Tweede Wereldoorlog het hoofdthema is. Het boek concentreert zich op het jaar 1943: een jaar waaraan biografen van

Joint Forward Operating Base Elements of Command and Control

National Research Council Canada - National Science Library

Summers, William

2002-01-01

... and its associated leadership, command of air assets at a joint forward operating base lacks guidance. Today, the United States prosecutes an air war over Afghanistan from bases in Uzbekistan, Pakistan, and Afghanistan...

Systems Engineering Management Training at Naval Air Systems Command

National Research Council Canada - National Science Library

Rebel, James

2000-01-01

Within the past few years, the Naval Air Systems Command (NAVAIR) has undergone several major changes including an engineering reorganization from a matrix organization to an Integrated Program Team/Competency Aligned Organization (IPT/CAO...

Features of preparation of student collapsible commands of football to the short-term competitions

Directory of Open Access Journals (Sweden)

Balan В.A.

2012-01-01

Full Text Available It is considered determination of influence of the trainings loadings on the organism of sportsmen. Principal reasons of unsuccessful appearances of leading collapsible commands of universities in final tournaments are certain. In research information of the questionnaire questioning is utillized among the trainers of commands of student league. In a pedagogical experiment took part 18 sportsmen aged 18-21 years. The level of physical and technical preparedness of sportsmen is appraised. The basic tasks of trainer are set in preparation of student commands to appearance in short-term competitions. A necessity is well-proven planning of the trainings loadings on the phase of incomplete renewal.

76 FR 14950 - Closed Meeting of the U.S. Strategic Command Strategic Advisory Group

Science.gov (United States)

2011-03-18

... DEPARTMENT OF DEFENSE Office of the Secretary Closed Meeting of the U.S. Strategic Command Strategic Advisory Group AGENCY: Department of Defense. ACTION: Notice of advisory committee closed meeting.... Strategic Command Strategic Advisory Group. DATES: April 7, 2011, from 8 a.m. to 5 p.m. and April 8, 2011...

Commix: Automating Evaluation and Exploitation of Command Injection Vulnerabilities in Web Applications

OpenAIRE

Stasinopoulos, Anastasios; Ntantogian, Christoforos; Xenakis, Christos

2018-01-01

Despite the prevalence and the high impact of command injection attacks, little attention has been given by the research community to this type of code injections. Although there are many software tools to detect and exploit other types of code injections, such as SQL injections or Cross Site Scripting, there is no dedicated and specialized software that detects and exploits, automatically, command injection vulnerabilities. This paper proposes an open source tool that automates the process o...

US Africa Command (AFRICOM) and Nigeria's National Security ...

African Journals Online (AJOL)

The US decision to establish a unified combatant command (AFRICOM) in African has raised numerous questions, particularly in Africa, regarding its possible security implications for the continent. The article narrows itself to the concern for unraveling the national security implications of Nigeria's opposition to the location of

Contractor Support on the Battlefield -- Increased Reliance Requires Commander's Attention

National Research Council Canada - National Science Library

Maloney, Kathy J

2006-01-01

.... Department of Defense initiatives to adopt a leaner business strategy, increase efficiency, and reduce expenditures have exposed the battlefield commander to additional operational risk centered...

Joint Force Headquarters - Global Strike: Preserving, Advancing, and Accelerating Operational Art for the Joint Force Commander

National Research Council Canada - National Science Library

Kruse, Jeffrey

2004-01-01

... combatant commanders. It can be viewed as infringing upon theater unity of command, a potential avenue for increased national level control and interference, and a competitor for finite warfighting resources...

Successful emergency operations and the Incident Command System

International Nuclear Information System (INIS)

Montgomery, M.

1994-01-01

The Incident Command System (ICS) was developed to provide an ''all-risk'' system of effective emergency scene management. The Cy-Fair Volunteer Fire Department (CFVFD) has made ICS an integral part of their operations since 1987. On January 26, 1993, CFVFD was called to investigate a petroleum odor and possible spill near State Highway 6 and Jackrabbit Road in northwest Harris County. Over the next six-hour period, the dispatch center received over 100 calls an hour regarding this incident. Personnel from CFVFD, the oil company, mutual aid fire departments, and private contractors worked around the dock to successfully contain, clean and reduce the effects of a 25,000 gallon crude oil spill next to a 141-foot diameter oil storage tank at the Satsuma Station. Among the keys to success was proper use of the Incident Command System (ICS). Problems overcome included the lack of a readily available water source, limited foam supplies, time of day, and incident duration

Discrete event command and control for networked teams with multiple missions

Science.gov (United States)

Lewis, Frank L.; Hudas, Greg R.; Pang, Chee Khiang; Middleton, Matthew B.; McMurrough, Christopher

2009-05-01

During mission execution in military applications, the TRADOC Pamphlet 525-66 Battle Command and Battle Space Awareness capabilities prescribe expectations that networked teams will perform in a reliable manner under changing mission requirements, varying resource availability and reliability, and resource faults. In this paper, a Command and Control (C2) structure is presented that allows for computer-aided execution of the networked team decision-making process, control of force resources, shared resource dispatching, and adaptability to change based on battlefield conditions. A mathematically justified networked computing environment is provided called the Discrete Event Control (DEC) Framework. DEC has the ability to provide the logical connectivity among all team participants including mission planners, field commanders, war-fighters, and robotic platforms. The proposed data management tools are developed and demonstrated on a simulation study and an implementation on a distributed wireless sensor network. The results show that the tasks of multiple missions are correctly sequenced in real-time, and that shared resources are suitably assigned to competing tasks under dynamically changing conditions without conflicts and bottlenecks.

RELATIONSHIP BETWEEN LINGUISTIC UNITS AND MOTOR COMMANDS.

Science.gov (United States)

FROMKIN, VICTORIA A.

ASSUMING THAT SPEECH IS THE RESULT OF A NUMBER OF DISCRETE NEUROMUSCULAR EVENTS AND THAT THE BRAIN CAN STORE ONLY A LIMITED NUMBER OF MOTOR COMMANDS WITH WHICH TO CONTROL THESE EVENTS, THE RESEARCH REPORTED IN THIS PAPER WAS DIRECTED TO A DETERMINATION OF THE SIZE AND NATURE OF THE STORED ITEMS AND AN EXPLANATION OF HOW SPEAKERS ENCODE A SEQUENCE…

Mission Command In A Communications Denied Environment

Science.gov (United States)

2017-02-16

the mutual trust between the echelons.8 In the United States armed forces, the Joint Chiefs have understood the value of...without being over controlling or micromanaging.12 During the execution phase the commander is the free to choose his position on the battlefield to... the Air Force Association Convention, National Harbor, MD, September 16, 2009, accessed at http://www.defenselink.mil/ speeches

STS-29 Commander Coats in JSC fixed base (FB) shuttle mission simulator (SMS)

Science.gov (United States)

1986-01-01

STS-29 Discovery, Orbiter Vehicle (OV) 103, Commander Michael L. Coats sits at commanders station forward flight deck controls in JSC fixed base (FB) shuttle mission simulator (SMS). Coats, wearing communications kit assembly headset and flight coveralls, looks away from forward control panels to aft flight deck. Pilots station seat back appears in foreground. FB-SMS is located in JSC Mission Simulation and Training Facility Bldg 5.

Results of investigations of an 0.010-scale 140A/B configuration (model 72-OTS) of the Rockwell International space shuttle orbiter in the NASA/Langley Research Center unitary plan wind tunnel

Science.gov (United States)

Petrozzi, M. T.; Milam, M. D.

1975-01-01

Experimental aerodynamic investigations were conducted in the NASA/Langley unitary plan wind tunnel on a sting mounted 0.010-scale outer mold line model of the 140A/B configuration of the Rockwell International Space Shuttle Vehicle. The primary test objectives were to obtain: (1) six component force and moment data for the mated vehicle at subsonic and transonic conditions, (2) effects of configuration build-up, (3) effects of protuberances, ET/orbiter fairings and attach structures, and (4) elevon deflection effects on wing bending moment. Six component aerodynamic force and moment data and base and balance cavity pressures were recorded over Mach numbers of 1.6, 2.0, 2.5, 2.86, 3.9, and 4.63 at a nominal Reynolds number of 20 to the 6th power per foot. Selected configurations were tested at angles of attack and sideslip from -10 deg to +10 deg. For all configurations involving the orbiter, wing bending, and torsion coefficients were measured on the right wing.

32 CFR 635.23 - DA Form 4833 (Commander's Report of Disciplinary or Administrative Action).

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true DA Form 4833 (Commander's Report of Disciplinary... Offense Reporting § 635.23 DA Form 4833 (Commander's Report of Disciplinary or Administrative Action). (a) Use. DA Form 4833 is used with DA Form 3975 to— (1) Record actions taken against identified offenders...

Naval Meteorology and Oceanography Command exhibit

Science.gov (United States)

2000-01-01

Designed to entertain while educating, StenniSphere at the John C. Stennis Space Center in Hancock County, Miss., includes informative displays and exhibits from NASA and other agencies located at Stennis, such as this one from the Naval Meteorology and Oceanography Command. Visitors can 'travel' three-dimensionally under the sea and check on the weather back home in the Weather Center. StenniSphere is open free of charge from 9 a.m. to 5 p.m. daily.

Human Systems Integration Assessment of Network Centric Command and Control

National Research Council Canada - National Science Library

Quashnock, Dee; Kelly, Richard T; Dunaway, John; Smillie, Robert J

2004-01-01

.... FORCEnet is the operational construct and architectural framework for Naval Network Centric Warfare in the information age that integrates warriors, sensors, networks, command and control, platforms...

Deductive Sensemaking Principles Using Personal Constructs of the Field Commanders

National Research Council Canada - National Science Library

Ntuen, Celestine A; Leedom, Dennis

2007-01-01

.... It is assumed that the expert commander constructs diverse and asynchronous sensemaking models when confronted with asymmetric situations-evolving and changing dynamics of the battlefield information...

Contract Claims Experience at the Naval Air Systems Command

National Research Council Canada - National Science Library

Carty, John

1999-01-01

...) experienced at the Naval Air Systems Command (NAVAIR) between January 1997 and December 1998 as a means to identify areas of potential improvement in management practices which could result in reduced numbers of claims being submitted...

Why Was General Richard O’Connor’s Command in Northwest Europe Less Effective Than Expected?

Science.gov (United States)

2011-03-01

Commander of 7 Division and Military Governor of Jerusalem , September 1938- August 1939. ______. Papers of General Sir Richard O’Connor KT, GCB, DSO, MC...Montgomery, Brian. A Field Marshall in the Family: A Personal Biography of Montgomery of Alamein. New York: Taplinger, 1973. Montgomery, Field...Commanders: A Composite Biography . Combat Studies Institute publications, Fort Leavenworth, Kansas: U.S. Army Command and General Staff College, 1989

Command and Control Across Space and Cyberspace Domains

Science.gov (United States)

2016-02-16

debilitating impact on security, national economic security, national public health or safety, or any combination of those matters.”16).17 From Joint...Third, push control (if not command) to the theater or operational level. Returning to the inbound ICBM scenario proposed by Maj Gen Zabel and detailed

Intelligent Tutoring System for Teaching Battlefield Command Reasoning Skills

National Research Council Canada - National Science Library

Domeshek, Eric

2002-01-01

... (ITS) for high-level battlefield command reasoning skills. The ultimate goal of this research is to develop new ITS techniques and technology for teaching skills that cannot he taught as simple methods and procedures to he followed...

Turbo machine tip clearance and vibration measurements using a fibre optic laser Doppler position sensor

Science.gov (United States)

Pfister, T.; Büttner, L.; Czarske, J.; Krain, H.; Schodl, R.

2006-07-01

This paper presents a novel fibre optic laser Doppler position sensor for single blade tip clearance and vibration measurements at turbo machines, which offers high temporal resolution and high position resolution simultaneously. The sensor principle is based on the generation of a measurement volume consisting of two superposed fan-like interference fringe systems with contrary fringe spacing gradients using wavelength division multiplexing. A flexible and robust measurement system with an all-passive fibre coupled measurement head has been realized employing diffractive and refractive optics. Measurements of tip clearance and rotor vibrations at a transonic centrifugal compressor performed during operation at up to 50 000 rpm (833 Hz) corresponding to 21.7 kHz blade frequency and 586 m s-1 blade tip velocity are presented. The results are in excellent agreement with those of capacitive probes. The mean uncertainty of the position measurement was around 20 µm and, thus, considerably better than for conventional tip clearance probes. Consequently, this sensor is capable of fulfilling the requirements for future active clearance control systems and has great potential for in situ and online tip clearance and vibration measurements at metallic and non-metallic turbine blades with high precision.

Differentiation between hepatic haemangiomas and cysts with an inversion recovery single-shot turbo spin-echo (SSTSE) sequence using the TI nulling value of hepatic haemangioma with sensitivity encoding

International Nuclear Information System (INIS)

Katada, Yoshiaki; Nozaki, Miwako; Yasumoto, Mayumi; Ishii, Chikako; Tanaka, Hiroshi; Nakamoto, Kazuya; Ohashi, Isamu

2010-01-01

To evaluate the additional value of inversion recovery (IR) single-shot turbo spin-echo (SSTSE) imaging with sensitivity encoding (SENSE) using the inversion time (TI) value of hepatic haemangioma as a supplement to conventional T2-weighted turbo spin-echo (TSE) imaging for the discrimination of hepatic haemangiomas and cysts. A total of 134 lesions (77 hepatic haemangiomas, 57 hepatic cysts) in 59 patients were evaluated. Three readers evaluated these images and used a five-point scale to evaluate the lesion status. A receiver operating characteristic (ROC) analysis and 2 x 2 table analysis were used. The ROC analysis for all the readers and all the cases revealed a significantly higher area under the curve (AUC) for the combination of moderately and heavily T2-weighted TSE with IR-SSTSE images (0.945) than for moderately and heavily T2-weighted TSE images alone (0.894) (P < 0.001). For the combination of T2-weighted TSE with IR-SSTSE versus T2-weighted TSE alone, the 2 x 2 table analysis revealed a higher true-positive rate; this difference was statistically significant (P < 0.0001). The introduction of IR-SSTSE with SENSE sequences significantly improves the diagnostic accuracy of the differentiation of hepatic haemangioma and cysts while increasing the time required for routine abdominal imaging by only 20 s. (orig.)

The diagnostic value of magnetic resonance urography using a balanced turbo field echo sequence

Energy Technology Data Exchange (ETDEWEB)

Cifci, Egemen; Coban, Goekcen [Baskent University Faculty of Medicine, Department of Radiology, Konya (Turkey); Cicek, Tufan; Goenuelalan, Umut [Baskent University Faculty of Medicine, Department of Urology, Konya (Turkey)

2016-12-15

The aim of the study was to compare the inter-observer variability and the accuracy of magnetic resonance urography (MRU) using a thin sectional balanced-turbo field echo (B-TFE) sequence for detecting ureteral calculi and to determine the effect of additional factors (size, density and location of the calculus) on the sensitivity and specificity of the MRU. MRU and CT images were evaluated independently by two radiologists according to presence, density and localization of calculi. The degrees of inter-rater agreement for categorical items were evaluated by the Kappa coefficient. According to the 1st and 2nd observers, the sensitivity of MRU was 65.9 %, 71.8 % and the specificity of MRU was 95.9 %, 100 %, respectively. Inter-observer agreement was 84.6 % for stone detection. The larger size had a better effect on detectability (p < 0.05). Also, the higher density had a better impact on detectability (p < 0.05). Our study has shown that B-TFE MRU was useful to detect ureteral calculi. However, B-TFE MRU has low sensitivity and high specificity in comparison with CT images. MRU is a reasonable alternative imaging technique for follow-up periods of selective groups like patients with large urinary stones, children or pregnant patients when ionizing radiation is undesirable. (orig.)

Traffic Command Gesture Recognition for Virtual Urban Scenes Based on a Spatiotemporal Convolution Neural Network

Directory of Open Access Journals (Sweden)

Chunyong Ma

2018-01-01

Full Text Available Intelligent recognition of traffic police command gestures increases authenticity and interactivity in virtual urban scenes. To actualize real-time traffic gesture recognition, a novel spatiotemporal convolution neural network (ST-CNN model is presented. We utilized Kinect 2.0 to construct a traffic police command gesture skeleton (TPCGS dataset collected from 10 volunteers. Subsequently, convolution operations on the locational change of each skeletal point were performed to extract temporal features, analyze the relative positions of skeletal points, and extract spatial features. After temporal and spatial features based on the three-dimensional positional information of traffic police skeleton points were extracted, the ST-CNN model classified positional information into eight types of Chinese traffic police gestures. The test accuracy of the ST-CNN model was 96.67%. In addition, a virtual urban traffic scene in which real-time command tests were carried out was set up, and a real-time test accuracy rate of 93.0% was achieved. The proposed ST-CNN model ensured a high level of accuracy and robustness. The ST-CNN model recognized traffic command gestures, and such recognition was found to control vehicles in virtual traffic environments, which enriches the interactive mode of the virtual city scene. Traffic command gesture recognition contributes to smart city construction.

32 CFR 536.3 - Command and organizational relationships.

Science.gov (United States)

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Command and organizational relationships. 536.3 Section 536.3 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY CLAIMS AND... relationships. (a) The Secretary of the Army. The Secretary of the Army (SA) heads the Army Claims System and...

32 CFR 770.31 - List of major naval installations in the State of Hawaii and cognizant commanders authorized to...

Science.gov (United States)

2010-07-01

... Fleet and Commander Naval Logistics Command Headquarters Areas, Johnson Circle Navy Exchange/Commissary... City Supply Area, and the Red Hill Fuel Storage Area). Contact: Commander, Naval Base, Pearl Harbor, HI... Shipyard, McGrew Point, Halawa, Hokulani, Manana, Pearl City Peninsula, Red Hill, Iroquois Point, Puuloa...

A CONTENT ANALYSIS OF MILITARY COMMANDER MESSAGES ABOUT TOBACCO AND OTHER HEALTH ISSUES IN MILITARY INSTALLATION NEWSPAPERS: WHAT DO MILITARY COMMANDERS SAY ABOUT TOBACCO?

Science.gov (United States)

Poston, Walker S.C.; Haddock, Christopher K.; Jahnke, Sara A.; Hyder, Melissa L.; Jitnarin, Nattinee

2014-01-01

Military installation newspapers are a primary means used by military commanders to communicate information about topics important to military personnel including leadership, training issues, installation events, safety concerns, and vital health issues. We conducted a content analysis of military commanders’ messages about health issues that were published in online military installation newspapers/newsfeeds. We identified a total of 75 publicly accessible installation newspapers/newsfeeds with commanders’ messages (n=39 Air Force, n=19 Army, n=7 Navy, n=1 Marine, and n=9 Joint Bases). Commander messages published between January 2012–December 2012 were collected, screened, and coded. Coder inter-rater reliability was 98.9%. Among the 2,479 coded commanders’ messages, 132 (5.3%) addressed a health topic as the primary focus. There were no significant differences between service branches in the percentage of health-oriented messages (χ2=5.019, p=0.285). The most commonly addressed health topics were exercise/fitness (23.5%), other mental health concerns (19.7%), alcohol/DUI (13.6%), and suicide (12.1%). Tobacco use was directly addressed as a primary health aim in only two commanders’ messages (1.5%). Health topics, and particularly tobacco-related content, are rarely written about by military commanders. The absence of tobacco-related health messages from line leadership contributes to the perception that tobacco control is a low priority. PMID:26032388

A design proposal of a certain missile tactical command system based on Beidou satellite communication and GPS positioning techniques

Science.gov (United States)

Ma, Jian; Hao, Yongsheng; Miao, Jian; Zhang, Jianmao

2007-11-01

This paper introduced a design proposal of tactical command system that applied to a kind of anti-tank missile carriers. The tactical command system was made up of embedded computer system based on PC104 bus, Linux operating system, digital military map, Beidou satellite communication equipments and GPS positioning equipments. The geographic coordinates was measured by the GPS receiver, the positioning data, commands and information were transmitted real-time between tactical command systems, tactical command systems and command center, by the Beidou satellite communication systems. The Beidou satellite communication equipments and GPS positioning equipments were integrated to an independent module, exchanging data with embedded computer through RS232 serial ports and USB ports. The decision support system software based on information fusion, calculates positioning data, geography information and battle field information synthetically, shows the position of allies and the position of enemy on the military map, and assesses the various threats of different enemy objects, educes a situation assessment and threat assessment.

Public Affairs Capacity Building: A Soft Tool for Combatant Commanders

National Research Council Canada - National Science Library

Salata, Jason P

2008-01-01

Public affairs capacity building is a valuable soft component of the Combatant Commander's Theater Campaign Plan that builds habitual relationships, fosters transparency, and enhances the ability to shape the AOR...

TGIN language reference manual: NAMMU and MATDIF commands

International Nuclear Information System (INIS)

Cliffe, K.A.; Herbert, A.W.

1992-03-01

NAMMU is a finite-element program for modelling groundwater flow and transport. The matrix diffusion option models the transport of radionuclides including the effects of rock-matrix diffusion. It uses the free-format structured-input TGIN. This report describes the commands in the TGIN language for running the NAMMU and MATDIF package. (author)

32 CFR Appendix E to Part 247 - DoD Command Newspaper and Magazine Review System

Science.gov (United States)

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false DoD Command Newspaper and Magazine Review System... OF DEFENSE (CONTINUED) MISCELLANEOUS DEPARTMENT OF DEFENSE NEWSPAPERS, MAGAZINES AND CIVILIAN ENTERPRISE PUBLICATIONS Pt. 247, App. E Appendix E to Part 247—DoD Command Newspaper and Magazine Review...

LABORATORY PROCESS CONTROLLER USING NATURAL LANGUAGE COMMANDS FROM A PERSONAL COMPUTER

Science.gov (United States)

Will, H.

1994-01-01

The complex environment of the typical research laboratory requires flexible process control. This program provides natural language process control from an IBM PC or compatible machine. Sometimes process control schedules require changes frequently, even several times per day. These changes may include adding, deleting, and rearranging steps in a process. This program sets up a process control system that can either run without an operator, or be run by workers with limited programming skills. The software system includes three programs. Two of the programs, written in FORTRAN77, record data and control research processes. The third program, written in Pascal, generates the FORTRAN subroutines used by the other two programs to identify the user commands with the user-written device drivers. The software system also includes an input data set which allows the user to define the user commands which are to be executed by the computer. To set the system up the operator writes device driver routines for all of the controlled devices. Once set up, this system requires only an input file containing natural language command lines which tell the system what to do and when to do it. The operator can make up custom commands for operating and taking data from external research equipment at any time of the day or night without the operator in attendance. This process control system requires a personal computer operating under MS-DOS with suitable hardware interfaces to all controlled devices. The program requires a FORTRAN77 compiler and user-written device drivers. This program was developed in 1989 and has a memory requirement of about 62 Kbytes.

An Appraisal of Asia-Pacific Cities as Control and Command Centres Embedded in World City Network

Directory of Open Access Journals (Sweden)

Z. Li

2017-08-01

Full Text Available Since the globalization trend is proliferating at a staggering rate, world cities have emerged as the most dominant vanguard incorporated into global economy. Control and command function is one of the robust integral parts of world city formation, which is closely associated with the corporate headquarter status of some dominant multinational companies. Previous research works on this topic tend to concentrate on the Western Europe and North American arenas neglecting the Asia-Pacific region. Hence, the objective of this paper is to explore control and command functions of Asia-Pacific cities with reference to headquarters’ locations of multinational companies. The methodology will utilize the Forbes global 2000 dataset from the seminal study of GaWC research group, and apply the control and command center model and the interlocking city network model to discover the control and command index, as well as network connectivity of Asia-Pacific cities. Based upon the empirical study of this research, we could identify the hierarchical structure and spatial structure of Asia-Pacific world cities to emerge as some control and command centers embedded in world city network.

Function Activation on Intelligent Buildings Using Mobile Devices through Voice Commands

Directory of Open Access Journals (Sweden)

Moumtadi Fatima

2014-04-01

Full Text Available Development of information and communication technologies has allowed the incorporation into different areas of human activity of apps that control electrical and electronic devices through voice commands. With these apps, in telemedicine people affected by some temporary decrease in their physical capacities have improved their level of autonomy; utilities have been added to educational environments to facilitate the use of IT applications to users with physical disability; finally, home automated solutions have made possible to any person with permanent limited mobility to take control over home devices using voice commands. In this article a home automated solution, developed over a client-server principle is presented. As the client device a MIDP 2.0 cell phone with a Java MicroEdition application loaded was used; as server a web server PC was used serving also as gateway towards a Konnex network, added with a speech recognizer engine. Fully functional prototype developed allowed take control over 3 devices with 87% success of the speech recognizer reliability, this percentage improved after the use of a drop-down menu of commands displayed over the monitor.

Reduction in respiratory motion artefacts on gadoxetate-enhanced MRI after training technicians to apply a simple and more patient-adapted breathing command

International Nuclear Information System (INIS)

Gutzeit, Andreas; Matoori, Simon; Weymarn, Constantin von; Reischauer, Carolin; Goyen, Matthias; Hergan, Klaus; Meissnitzer, Matthias; Forstner, Rosemarie; Froehlich, Johannes M.; Kolokythas, Orpheus; Soyka, Jan D.; Doert, Aleksis; Koh, Dow-Mu

2016-01-01

To investigate whether a trained group of technicians using a modified breathing command during gadoxetate-enhanced liver MRI reduces respiratory motion artefacts compared to non-trained technicians using a traditional breathing command. The gadoxetate-enhanced liver MR images of 30 patients acquired using the traditional breathing command and the subsequent 30 patients after training the technicians to use a modified breathing command were analyzed. A subgroup of patients (n = 8) underwent scans both by trained and untrained technicians. Images obtained using the traditional and modified breathing command were compared for the presence of breathing artefacts [respiratory artefact-based image quality scores from 1 (best) to 5 (non-diagnostic)]. There was a highly significant improvement in the arterial phase image quality scores in patients using the modified breathing command compared to the traditional one (P < 0.001). The percentage of patients with severe and extensive breathing artefacts in the arterial phase decreased from 33.3 % to 6.7 % after introducing the modified breathing command (P = 0.021). In the subgroup that underwent MRI using both breathing commands, arterial phase image quality improved significantly (P = 0.008) using the modified breathing command. Training technicians to use a modified breathing command significantly improved arterial phase image quality of gadoxetate-enhanced liver MRI. (orig.)

Opening the Aperture... Ending Service "Branding" of US Unified Commands

National Research Council Canada - National Science Library

Handy, Russell

2003-01-01

.... It asserts that over tine, the defense establishment runs the risk of establishing a cultural identity in the command that limits perspectives to aground-, sea-, or air and space-centric viewpoint...

The International Criminal Court: Considerations for the Joint Force Commander

National Research Council Canada - National Science Library

Sutton, Michael

2003-01-01

An analysis of the issues and remedies a Joint Force Commander should be concerned about because of the relationship between the United States and the newly-created International Criminal Court (ICC...