Single-Photon-Sensitive HgCdTe Avalanche Photodiode Detector

Science.gov (United States)

Huntington, Andrew

2013-01-01

The purpose of this program was to develop single-photon-sensitive short-wavelength infrared (SWIR) and mid-wavelength infrared (MWIR) avalanche photodiode (APD) receivers based on linear-mode HgCdTe APDs, for application by NASA in light detection and ranging (lidar) sensors. Linear-mode photon-counting APDs are desired for lidar because they have a shorter pixel dead time than Geiger APDs, and can detect sequential pulse returns from multiple objects that are closely spaced in range. Linear-mode APDs can also measure photon number, which Geiger APDs cannot, adding an extra dimension to lidar scene data for multi-photon returns. High-gain APDs with low multiplication noise are required for efficient linear-mode detection of single photons because of APD gain statistics -- a low-excess-noise APD will generate detectible current pulses from single photon input at a much higher rate of occurrence than will a noisy APD operated at the same average gain. MWIR and LWIR electron-avalanche HgCdTe APDs have been shown to operate in linear mode at high average avalanche gain (M > 1000) without excess multiplication noise (F = 1), and are therefore very good candidates for linear-mode photon counting. However, detectors fashioned from these narrow-bandgap alloys require aggressive cooling to control thermal dark current. Wider-bandgap SWIR HgCdTe APDs were investigated in this program as a strategy to reduce detector cooling requirements.

Status of HgCdTe Barrier Infrared Detectors Grown by MOCVD in Military University of Technology

Science.gov (United States)

Kopytko, M.; Jóźwikowski, K.; Martyniuk, P.; Gawron, W.; Madejczyk, P.; Kowalewski, A.; Markowska, O.; Rogalski, A.; Rutkowski, J.

2016-09-01

In this paper we present the status of HgCdTe barrier detectors with an emphasis on technological progress in metalorganic chemical vapor deposition (MOCVD) growth achieved recently at the Institute of Applied Physics, Military University of Technology. It is shown that MOCVD technology is an excellent tool for HgCdTe barrier architecture growth with a wide range of composition, donor /acceptor doping, and without post-grown annealing. The device concept of a specific barrier bandgap architecture integrated with Auger-suppression is as a good solution for high-operating temperature infrared detectors. Analyzed devices show a high performance comparable with the state-of-the-art of HgCdTe photodiodes. Dark current densities are close to the values given by "Rule 07" and detectivities of non-immersed detectors are close to the value marked for HgCdTe photodiodes. Experimental data of long-wavelength infrared detector structures were confirmed by numerical simulations obtained by a commercially available software APSYS platform. A detailed analysis applied to explain dark current plots was made, taking into account Shockley-Read-Hall, Auger, and tunneling currents.

Monolithic dual-band HgCdTe infrared detector structure

CSIR Research Space (South Africa)

Parish, G

1997-07-01

Full Text Available A monolithic HgCdTe photoconductive device structure is presented that is suitable for dual-band optically registered infrared photodetection in the two atmospheric transmission windows of 3-5 mu m and 8-12 mu m, which correspond to the mid...

Temperature-sensitive junction transformations for mid-wavelength HgCdTe photovoltaic infrared detector arrays by laser beam induced current microscope

Energy Technology Data Exchange (ETDEWEB)

Qiu, Weicheng [College of Photoelectric Science and Engineering, National University of Defense Technology, Changsha, Hunan 410073 (China); National Laboratory for Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083 (China); Hu, Weida, E-mail: wdhu@mail.sitp.ac.cn; Lin, Tie; Yin, Fei; Zhang, Bo; Chen, Xiaoshuang; Lu, Wei [National Laboratory for Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083 (China); Cheng, Xiang' ai, E-mail: xiang-ai-cheng@126.com; Wang, Rui [College of Photoelectric Science and Engineering, National University of Defense Technology, Changsha, Hunan 410073 (China)

2014-11-10

In this paper, we report on the disappearance of the photosensitive area extension effect and the unusual temperature dependence of junction transformation for mid-wavelength, n-on-p HgCdTe photovoltaic infrared detector arrays. The n-type region is formed by B{sup +} ion implantation on Hg-vacancy-doped p-type HgCdTe. Junction transformations under different temperatures are visually captured by a laser beam induced current microscope. A physical model of temperature dependence on junction transformation is proposed and demonstrated by using numerical simulations. It is shown that Hg-interstitial diffusion and temperature activated defects jointly lead to the p-n junction transformation dependence on temperature, and the weaker mixed conduction compared with long-wavelength HgCdTe photodiode contributes to the disappearance of the photosensitive area extension effect in mid-wavelength HgCdTe infrared detector arrays.

Piezoelectric Actuator/Sensor Technology at Rockwell

Science.gov (United States)

Neurgaonkar, Ratnakar R.

1996-01-01

We describe the state-of-the art of piezoelectric materials based on perovskite and tungsten bronze families for sensor, actuator and smart structure applications. The microstructural defects in these materials have been eliminated to a large extent and the resulting materials exhibit exceedingly high performance for various applications. The performance of Rockwell actuators/sensors is at least 3 times better than commercially available products. These high performance actuators are being incorporated into various applications including, DOD, NASA and commercial. The multilayer actuator stacks fabricated from our piezoceramics are advantageous for sensing and high capacitance applications. In this presentation, we will describe the use of our high performance piezo-ceramics for actuators and sensors, including multilayer stacks and composite structures.

Rockwell International Hot Laboratory decontamination and dismantlement interim progress report 1987-1996

International Nuclear Information System (INIS)

None

1997-01-01

OAK A271 Rockwell International Hot Laboratory decontamination and dismantlement interim progress report 1987-1996. The Rockwell International Hot Laboratory (RIHL) is one of a number of former nuclear facilities undergoing decontamination and decommissioning (D and D) at the Santa Susana Field Laboratory (SSFL). The RIHL facility is in the later stages of dismantlement, with the final objective of returning the site location to its original natural state. This report documents the decontamination and dismantlement activities performed at the facility over the time period 1988 through 1996. At this time, the support buildings, all equipment associated with the facility, and the entire above-ground structure of the primary facility building (Building 020) have been removed. The basement portion of this building and the outside yard areas (primarily asphalt and soil) are scheduled for D and D activities beginning in 1997

Surface passivation of HgCdTe by CdZnTe and its characteristics

Science.gov (United States)

Lee, T. S.; Choi, K. K.; Jeoung, Y. T.; Kim, H. K.; Kim, J. M.; Kim, Y. H.; Chang, J. M.; Song, W. S.; Kim, S. U.; Park, M. J.; Lee, S. D.

1997-06-01

In this paper, we report the results of capacitance-voltage measurements conducted on several metal-insulator semiconductor (MIS) capacitors in which HgCdTe surfaces are treated with various surface etching and oxidation processes. CdZnTe passivation layers were deposited on HgCdTe surfaces by thermal evaporation after the surfaces were etched with 0.5-2.0% bromine in methanol solution, or thin oxide layers (tox ˜ few ten Å) were grown on the surfaces, in order to investigate effects of the surface treatments on the electrical properties of the surfaces, as determined from capacitance-voltage (C-V) measurements at 80K and 1 MHz. A negative flat band voltage has been observed for MIS capacitors fabricated after etching of HgCdTe surfaces with bromine in methanol solutions, which is reported to make the surface Te-rich. It is inferred that residual Te on the surface is a positive charge, Te4+. C-V characteristics for MIS capacitors fabricated on oxide surfaces grown by air-exposure and electrolytic process have shown large hysteresis effects, from which it is inferred that imperfect and electrically active oxide compounds and HgTe particles near the surface become slow interface states.

Arsenic complexes optical signatures in As-doped HgCdTe

Energy Technology Data Exchange (ETDEWEB)

Gemain, F.; Robin, I. C.; Brochen, S.; Ballet, P.; Gravrand, O.; Feuillet, G. [CEA-LETI Minatec Campus, 17 rue des Martyrs, 38000 Grenoble (France)

2013-04-08

In this paper, the optical signatures of arsenic complexes in As-doped HgCdTe samples grown by molecular beam epitaxy are clearly identified using comparison between photoluminescence spectra, Extended X-Ray Absorption Fine Structure, and Hall measurements. The ionization energies of the different complexes are measured both by photoluminescence and Hall measurements.

Arsenic complexes optical signatures in As-doped HgCdTe

International Nuclear Information System (INIS)

Gemain, F.; Robin, I. C.; Brochen, S.; Ballet, P.; Gravrand, O.; Feuillet, G.

2013-01-01

In this paper, the optical signatures of arsenic complexes in As-doped HgCdTe samples grown by molecular beam epitaxy are clearly identified using comparison between photoluminescence spectra, Extended X-Ray Absorption Fine Structure, and Hall measurements. The ionization energies of the different complexes are measured both by photoluminescence and Hall measurements.

Linear Mode HgCdTe Avalanche Photodiodes for Photon Counting Applications

Science.gov (United States)

Sullivan, William, III; Beck, Jeffrey; Scritchfield, Richard; Skokan, Mark; Mitra, Pradip; Sun, Xiaoli; Abshire, James; Carpenter, Darren; Lane, Barry

2015-01-01

An overview of recent improvements in the understanding and maturity of linear mode photon counting with HgCdTe electron-initiated avalanche photodiodes is presented. The first HgCdTe LMPC 2x8 format array fabricated in 2011 with 64 micron pitch was a remarkable success in terms of demonstrating a high single photon signal to noise ratio of 13.7 with an excess noise factor of 1.3-1.4, a 7 ns minimum time between events, and a broad spectral response extending from 0.4 micron to 4.2 micron. The main limitations were a greater than 10x higher false event rate than expected of greater than 1 MHz, a 5-7x lower than expected APD gain, and a photon detection efficiency of only 50% when greater than 60% was expected. This paper discusses the reasons behind these limitations and the implementation of their mitigations with new results.

Passivation Effect of Atomic Layer Deposition of Al2O3 Film on HgCdTe Infrared Detectors

Science.gov (United States)

Zhang, Peng; Ye, Zhen-Hua; Sun, Chang-Hong; Chen, Yi-Yu; Zhang, Tian-Ning; Chen, Xin; Lin, Chun; Ding, Ring-Jun; He, Li

2016-09-01

The passivation effect of atomic layer deposition of (ALD) Al2O3 film on a HgCdTe infrared detector was investigated in this work. The passivation effect of Al2O3 film was evaluated by measuring the minority carrier lifetime, capacitance versus voltage ( C- V) characteristics of metal-insulator-semiconductor devices, and resistance versus voltage ( R- V) characteristics of variable-area photodiodes. The minority carrier lifetime, C- V characteristics, and R- V characteristics of HgCdTe devices passivated by ALD Al2O3 film was comparable to those of HgCdTe devices passivated by e-beam evaporation of ZnS/CdTe film. However, the baking stability of devices passivated by Al2O3 film is inferior to that of devices passivated by ZnS/CdTe film. In future work, by optimizing the ALD Al2O3 film growing process and annealing conditions, it may be feasible to achieve both excellent electrical properties and good baking stability.

Thermal stability of atomic layer deposition Al2O3 film on HgCdTe

Science.gov (United States)

Zhang, P.; Sun, C. H.; Zhang, Y.; Chen, X.; He, K.; Chen, Y. Y.; Ye, Z. H.

2015-06-01

Thermal stability of Atomic Layer Deposition Al2O3 film on HgCdTe was investigated by Al2O3 film post-deposition annealing treatment and Metal-Insulator-Semiconductor device low-temperature baking treatment. The effectiveness of Al2O3 film was evaluated by measuring the minority carrier lifetime and capacitance versus voltage characteristics. After annealing treatment, the minority carrier lifetime of the HgCdTe sample presented a slight decrease. Furthermore, the fixed charge density and the slow charge density decreased significantly in the annealed MIS device. After baking treatment, the fixed charge density and the slow charge density of the unannealed and annealed MIS devices decreased and increased, respectively.

Update on Linear Mode Photon Counting with the HgCdTe Linear Mode Avalanche Photodiode

Science.gov (United States)

Beck, Jeffrey D.; Kinch, Mike; Sun, Xiaoli

2014-01-01

The behavior of the gain-voltage characteristic of the mid-wavelength infrared cutoff HgCdTe linear mode avalanche photodiode (e-APD) is discussed both experimentally and theoretically as a function of the width of the multiplication region. Data are shown that demonstrate a strong dependence of the gain at a given bias voltage on the width of the n- gain region. Geometrical and fundamental theoretical models are examined to explain this behavior. The geometrical model takes into account the gain-dependent optical fill factor of the cylindrical APD. The theoretical model is based on the ballistic ionization model being developed for the HgCdTe APD. It is concluded that the fundamental theoretical explanation is the dominant effect. A model is developed that combines both the geometrical and fundamental effects. The model also takes into account the effect of the varying multiplication width in the low bias region of the gain-voltage curve. It is concluded that the lower than expected gain seen in the first 2 × 8 HgCdTe linear mode photon counting APD arrays, and higher excess noise factor, was very likely due to the larger than typical multiplication region length in the photon counting APD pixel design. The implications of these effects on device photon counting performance are discussed.

A method to eliminate wetting during the homogenization of HgCdTe

Science.gov (United States)

Su, Ching-Hua; Lehoczky, S. L.; Szofran, F. R.

1986-01-01

Adhesion of HgCdTe samples to fused silica ampoule walls, or 'wetting', during the homogenization process was eliminated by adopting a slower heating rate. The idea is to decrease Cd activity in the sample so as to reduce the rate of reaction between Cd and the silica wall.

The development of the room temperature LWIR HgCdTe detectors for free space optics communication systems

Science.gov (United States)

Martyniuk, Piotr; Gawron, Waldemar; Mikołajczyk, Janusz

2017-10-01

There are many room temperature applications to include free space optics (FSO) communication system combining quantum cascade lasers sources where HgCdTe long-wave (8-12 micrometer) infrared radiation (LWIR) detector reaching ultrafast response time 109 cmHz1/2/W. Since commercially available FSO could operate separately in SWIR, MWIR and LWIR range - the dual band detectors should be implemented into FSO. This paper shows theoretical performance of the dual band back-to-back MWIR and LWIR HgCdTe detector operating at 300 K pointing out the MWIR active layer influence on LWIR operating regime.

Development of Buffer Layer Technologies for LWIR and VLWIR HgCdTe Integration on Si

National Research Council Canada - National Science Library

Golding, Terry D

2005-01-01

This program proposed to develop manufacturable, cost-effective buffer layer technologies that would allow either hybrid or monolithic integration of LWIR and VLWIR HgCdTe infrared focal plane arrays...

HgCdTe APDS for space applications

Science.gov (United States)

Rothman, Johan; de Broniol, Eric; Foubert, Kevin; Mollard, Laurent; Péré-Laperne, Nicolas; Salvetti, Frederic; Kerlain, Alexandre; Reibel, Yann

2017-11-01

HgCdTe avalanche photodiode focal plane arrays (FPAs) and single element detectors have been developed for a large scope of photon starved applications. The present communication present the characteristics of our most recent detector developments that opens the horizon for low infrared (IR) photon number detection with high information conservation for imaging, atmospheric lidar and free space telecommunications. In particular, we report on the performance of TEC cooled large area detectors with sensitive diameters ranging from 30- 200 μm, characterised by detector gains of 2- 20 V/μW and noise equivalent input power of 0.1-1 nW for bandwidths ranging from 20 to 400 MHz.

Thermal Cycle Annealing and its Application to Arsenic-Ion Implanted HgCdTe

Science.gov (United States)

2014-06-26

Rao Mulpuri Sina Simingalam, Priyalal Wijewarnasuriya, Mulpuri V. Rao 1720BH c. THIS PAGE The public reporting burden for this collection of...Implanted HgCdTe Sina Simingalama,b,c, Priyalal Wijewarnasuriyab, Mulpuri V. Raoc a. School of Physics, Astronomy and Computational Sciences, George

Long wavelength stimulated emission up to 9.5 μm from HgCdTe quantum well heterostructures

Energy Technology Data Exchange (ETDEWEB)

Morozov, S. V.; Rumyantsev, V. V., E-mail: rumyantsev@ipmras.ru; Dubinov, A. A.; Kudryavtsev, K. E.; Antonov, A. V.; Gavrilenko, V. I. [Institute for Physics of Microstructures of Russian Academy of Sciences, 603950 Nizhny Novgorod (Russian Federation); Lobachevsky State University of Nizhny Novgorod, 603950 Nizhny Novgorod (Russian Federation); Kadykov, A. M. [Institute for Physics of Microstructures of Russian Academy of Sciences, 603950 Nizhny Novgorod (Russian Federation); UMR CNRS 5221, GIS-TERALAB, Université Montpellier II, 34095 Montpellier (France); Mikhailov, N. N. [A.V. Rzhanov Institute of Semiconductor Physics, Siberian Branch of Russian Academy of Sciences, 630090 Novosibirsk (Russian Federation); Novosibirsk State University, 630090 Novosibirsk (Russian Federation); Dvoretskii, S. A. [A.V. Rzhanov Institute of Semiconductor Physics, Siberian Branch of Russian Academy of Sciences, 630090 Novosibirsk (Russian Federation)

2016-02-29

Stimulated emission from waveguide HgCdTe structures with several quantum wells inside waveguide core is demonstrated at wavelengths up to 9.5 μm. Photoluminescence line narrowing down to kT energy, as well as superlinear rise in its intensity evidence the onset of the stimulated emission, which takes place under optical pumping with intensity as small as ∼0.1 kW/cm{sup 2} at 18 K and 1 kW/cm{sup 2} at 80 K. One can conclude that HgCdTe structures potential for long-wavelength lasers is not exhausted.

Long life technology work at Rockwell International Space Division

Science.gov (United States)

Huzel, D. K.

1974-01-01

This paper presents highlights of long-life technology oriented work performed at the Space Division of Rockwell International Corporation under contract to NASA. This effort included evaluation of Saturn V launch vehicle mechanical and electromechanical components for potential extended life capabilities, endurance tests, and accelerated aging experiments. A major aspect was evaluation of the components at the subassembly level (i.e., at the interface between moving surfaces) through in-depth wear analyses and assessments. Although some of this work is still in progress, preliminary conclusions are drawn and presented, together with the rationale for each. The paper concludes with a summary of the effort still remaining.

A New Way of Doing Business: Reusable Launch Vehicle Advanced Thermal Protection Systems Technology Development: NASA Ames and Rockwell International Partnership

Science.gov (United States)

Carroll, Carol W.; Fleming, Mary; Hogenson, Pete; Green, Michael J.; Rasky, Daniel J. (Technical Monitor)

1995-01-01

NASA Ames Research Center and Rockwell International are partners in a Cooperative Agreement (CA) for the development of Thermal Protection Systems (TPS) for the Reusable Launch Vehicle (RLV) Technology Program. This Cooperative Agreement is a 30 month effort focused on transferring NASA innovations to Rockwell and working as partners to advance the state-of-the-art in several TPS areas. The use of a Cooperative Agreement is a new way of doing business for NASA and Industry which eliminates the traditional customer/contractor relationship and replaces it with a NASA/Industry partnership.

Evolution of containment facilities for spectroscopic analysis at Rockwell Hanford Operations

International Nuclear Information System (INIS)

Hiller, J.M.

1984-01-01

The analysis of radioactive material requires much thought concerning getting the job done while still maintaining a safe working environment. A Rockwell Hanford Operations, several stages of evolution in instrumentation for spectroscopic elemental analysis have evolved, reflecting different philosophies respect to shielding and contamination control. Atomic absorption and inductively coupled plasma emission spectroscopic systems have been used for analyzing samples in support of a fission product recovery plant, nuclear waste processing and characterization programs, and U and Pu separation plants. Design thoughts, criticisms, and lessons learned in 20 years of containment for spectroscopic analysis are presented

Improved HgCdTe detectors with novel antireflection coating

Science.gov (United States)

Babu, Sachi R.; Hu, Kelley; Manthripragada, Sridhar; Martineau, Robert J.; Kotecki, C. A.; Peters, F. A.; Burgess, A. S.; Krebs, Danny J.; Mott, David B.; Ewin, Audrey J.; Miles, A.; Nguyen, Trang L.; Shu, Peter K.

1996-10-01

The composite infrared spctrometer (CIRS) is an important instrument for the upcoming Cassini mission for sensing infrared (IR) radiation from the Saturanian planetary system. We have delivered a linear, ten element, mercury cadmium telluride (HgCdTe) photoconductive detector array for use on focal plane 3 (FP3), which is responsible for detecting radiation from the 9.1 micrometer to 16.6 micrometer wavelength range. Reliable HgCdTe detectors require robust passivation, a low-stress zinc sulfide (ZnS) anti-reflection (AR) coating with good adhesion, and a proper optical cavity design to smooth out the resonance in the detector spectral response. During the development of CIRS flight array, we have demonstrated the potential of using an in-situ interfacial layer, such as SiN(subscript x), between ZnS and the anodic oxide. Such an interfacial layer drastically improves the adhesion between the ZnS and oxide, without degrading the minority carrier lifetime. We have also demonstrated the feasibility of applying a SiN(subscript x) 'rain coat' layer over the ZnS to prevent moisture and other chemicals from attacking the AR coating, thus improving the long term reliability. This also enables device operation in a hazardous environment. The alumina/epoxy/HgCdTe/oxide/ZnS structure is a complicated multi-cavity optical system. We have developed an extensive device simulation, which enables us to make the optimal choice of individual cavity thickness for minimizing the resonance and maximizing the quantum efficiency. We have also used 0.05 micrometer alumina powder loaded epoxy to minimize the reflections at the epoxy/HgCdTe interface, thus minimizing the resonance.

Development of HgCdTe large format MBE arrays and noise-free high speed MOVPE EAPD arrays for ground based NIR astronomy

Science.gov (United States)

Finger, G.; Baker, I.; Downing, M.; Alvarez, D.; Ives, D.; Mehrgan, L.; Meyer, M.; Stegmeier, J.; Weller, H. J.

2017-11-01

Large format near infrared HgCdTe 2Kx2K and 4Kx4K MBE arrays have reached a level of maturity which meets most of the specifications required for near infrared (NIR) astronomy. The only remaining problem is the persistence effect which is device specific and not yet fully under control. For ground based multi-object spectroscopy on 40 meter class telescopes larger pixels would be advantageous. For high speed near infrared fringe tracking and wavefront sensing the only way to overcome the CMOS noise barrier is the amplification of the photoelectron signal inside the infrared pixel by means of the avalanche gain. A readout chip for a 320x256 pixel HgCdTe eAPD array will be presented which has 32 parallel video outputs being arranged in such a way that the full multiplex advantage is also available for small sub-windows. In combination with the high APD gain this allows reducing the readout noise to the subelectron level by applying nondestructive readout schemes with subpixel sampling. Arrays grown by MOVPE achieve subelectron readout noise and operate with superb cosmetic quality at high APD gain. Efforts are made to reduce the dark current of those arrays to make this technology also available for large format focal planes of NIR instruments offering noise free detectors for deep exposures. The dark current of the latest MOVPE eAPD arrays is already at a level adequate for noiseless broad and narrow band imaging in scientific instruments.

Evolution of containment facilities for spectroscopic analysis at Rockwell Hanford Operations

International Nuclear Information System (INIS)

Hiller, J.M.

1984-01-01

The analysis of radioactive material requires much thought concerning getting the job done while still maintaining a safe working environment. At Rockwell Hanford Operations, we have gone through several stages of evolution in instrumentation for spectroscopic elemental analysis, reflecting different philosophies with respect to shielding and contamination control. Atomic absorption and inductively coupled plasma emission spectroscopic systems have been used for analyzing samples in support of a fission product recovery plant, nuclear waste processing and characterization programs, and U and Pu separation plants. Design thoughts, criticisms, and lessons learned in 20 years of containment for spectroscopic analysis are presented. 3 refs., 6 figs., 2 tabs

A Highly Sensitive Multi-Element HgCdTe E-APD Detector for IPDA Lidar Applications

Science.gov (United States)

Beck, Jeff; Welch, Terry; Mitra, Pradip; Reiff, Kirk; Sun, Xiaoli; Abshire, James

2014-01-01

An HgCdTe electron avalanche photodiode (e-APD) detector has been developed for lidar receivers, one application of which is integrated path differential absorption lidar measurements of such atmospheric trace gases as CO2 and CH4. The HgCdTe APD has a wide, visible to mid-wave-infrared, spectral response, high dynamic range, substantially improved sensitivity, and an expected improvement in operational lifetime. A demonstration sensor-chip assembly consisting of a 4.3 lm cutoff HgCdTe 4 9 4 APD detector array with 80 micrometer pitch pixels and a custom complementary metal-oxide-semiconductor readout integrated circuit was developed. For one typical array the APD gain was 654 at 12 V with corresponding gain normalized dark currents ranging from 1.2 fA to 3.2 fA. The 4 9 4 detector system was characterized at 77 K with a 1.55 micrometer wavelength, 1 microsecond wide, laser pulse. The measured unit gain detector photon conversion efficiency was 91.1%. At 11 V bias the mean measured APD gain at 77 K was 307.8 with sigma/mean uniformity of 1.23%. The average, noise-bandwidth normalized, system noise-equivalent power (NEP) was 1.04 fW/Hz(exp 1/2) with a sigma/mean of 3.8%. The measured, electronics-limited, bandwidth of 6.8 MHz was more than adequate for 1 microsecond pulse detection. The system had an NEP (3 MHz) of 0.4 fW/Hz(exp 1/2) at 12 V APD bias and a linear dynamic range close to 1000. A gain-independent quantum-limited SNR of 80% of full theoretical was indicative of a gain-independent excess noise factor very close to 1.0 and the expected APD mode quantum efficiency.

Shared visions: Partnership of Rockwell International and NASA Cost Effectiveness Enhancements (CEE) for the space shuttle system integration program

Science.gov (United States)

Bejmuk, Bohdan I.; Williams, Larry

As a result of limited resources and tight fiscal constraints over the past several years, the defense and aerospace industries have experienced a downturn in business activity. The impact of fewer contracts being awarded has placed a greater emphasis for effectiveness and efficiency on industry contractors. It is clear that a reallocation of resources is required for America to continue to lead the world in space and technology. The key to technological and economic survival is the transforming of existing programs, such as the Space Shuttle Program, into more cost efficient programs so as to divert the savings to other NASA programs. The partnership between Rockwell International and NASA and their joint improvement efforts that resulted in significant streamlining and cost reduction measures to Rockwell International Space System Division's work on the Space Shuttle System Integration Contract is described. This work was a result of an established Cost Effectiveness Enhancement (CEE) Team formed initially in Fiscal Year 1991, and more recently expanded to a larger scale CEE Initiative in 1992. By working closely with the customer in agreeing to contract content, obtaining management endorsement and commitment, and involving the employees in total quality management (TQM) and continuous improvement 'teams,' the initial annual cost reduction target was exceeded significantly. The CEE Initiative helped reduce the cost of the Shuttle Systems Integration contract while establishing a stronger program based upon customer needs, teamwork, quality enhancements, and cost effectiveness. This was accomplished by systematically analyzing, challenging, and changing the established processes, practices, and systems. This examination, in nature, was work intensive due to the depth and breadth of the activity. The CEE Initiative has provided opportunities to make a difference in the way Rockwell and NASA work together - to update the methods and processes of the organizations

Shared visions: Partnership of Rockwell International and NASA Cost Effectiveness Enhancements (CEE) for the space shuttle system integration program

Science.gov (United States)

Bejmuk, Bohdan I.; Williams, Larry

1992-01-01

As a result of limited resources and tight fiscal constraints over the past several years, the defense and aerospace industries have experienced a downturn in business activity. The impact of fewer contracts being awarded has placed a greater emphasis for effectiveness and efficiency on industry contractors. It is clear that a reallocation of resources is required for America to continue to lead the world in space and technology. The key to technological and economic survival is the transforming of existing programs, such as the Space Shuttle Program, into more cost efficient programs so as to divert the savings to other NASA programs. The partnership between Rockwell International and NASA and their joint improvement efforts that resulted in significant streamlining and cost reduction measures to Rockwell International Space System Division's work on the Space Shuttle System Integration Contract is described. This work was a result of an established Cost Effectiveness Enhancement (CEE) Team formed initially in Fiscal Year 1991, and more recently expanded to a larger scale CEE Initiative in 1992. By working closely with the customer in agreeing to contract content, obtaining management endorsement and commitment, and involving the employees in total quality management (TQM) and continuous improvement 'teams,' the initial annual cost reduction target was exceeded significantly. The CEE Initiative helped reduce the cost of the Shuttle Systems Integration contract while establishing a stronger program based upon customer needs, teamwork, quality enhancements, and cost effectiveness. This was accomplished by systematically analyzing, challenging, and changing the established processes, practices, and systems. This examination, in nature, was work intensive due to the depth and breadth of the activity. The CEE Initiative has provided opportunities to make a difference in the way Rockwell and NASA work together - to update the methods and processes of the organizations

Rockwell International - Rocky Flats Plant: Occupational Health Information System

International Nuclear Information System (INIS)

Bistine, R.W.; Petrocchi, A.; Wright, W.L.; Yoder, R.E.; Fischer, C.M.

1984-01-01

The Rockwell International-Rocky Flats Occupational Health Information System uses the FLOW GEMINI software on a VAX computer system. The system is extremely user friendly, flexible, comprehensive, and easily customized by the user. The system contains the editioned files (i.e., time organized historical data) of the Medical, Industrial Hygiene, Health Physics, and Safety Departments. It maintains, analyzes and reports on data from employee medical and work histories, medical exams, workplace monitoring, and health effects related to specific hazards or locations in the workplace. It identifies and reports potential individual and group problems through regular reports and responses to on-line queries. In addition, it schedules examination, sampling, produces standard user-defined reports, and provides statistical analysis capabilities. The system presently contains a file of more than 20,000 Material Data Safety Sheets. A user group provides a mechanism for sharing ideas and continual software enhancement. 11 figures

Active Pixel HgCdTe Detectors With Built-in Dark Current Reduction for Near-Room Temperature Operation, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — High sensitivity HgCdTe infrared arrays operating at 77K can now be tailored in a wide range of wavelengths from 1 to 14 microns. However, due to the cooling...

Active Pixel HgCdTe Detectors With Built-in Dark Current Reduction for Near-Room Temperature Operation, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — High sensitivity HgCdTe infrared arrays operating at 77K can now be tailored in a wide range of wavelengths from 1 to14 um. However, the cooling requirements make...

Fifty years of HgCdTe at Texas Instruments and beyond

Science.gov (United States)

Kinch, Michael A.

2009-05-01

Work on HgCdTe began at Texas Instruments in the early 1960s, and continued through 1997 when TI's defense business was sold first to Raytheon, and subsequently in 1998 to DRS Technologies. This presentation traces the history of HgCdTe's evolution throughout this timeframe to the present day, as viewed through the eyes of the author and several of his TI contemporaries who have survived the experience. The materials technology will be traced from the early days of bulk growth by the solid state recrystalization technique, through the traveling heater method of growth, to liquid phase epitaxy from large Te-rich melts, to vapor phase growth by molecular beam epitaxy and metal organic chemical vapor deposition. The evolution of detector device architectures at TI over the years will be discussed, from the early, successful days of photoconductors and the Common Module System, through the somewhat problematic and relatively unsuccessful foray into charge coupled and charge injection devices for 2nd generation FPAs for the Javelin program, to the outstandingly successful development of the vertically integrated photodiode (VIP) and high density VIP FPA architectures for mono-color and multi-color 3rd generation systems. The versatile, and unique nature of this infrared semiconductor materials system will be highlighted by reference to current work at DRS Technologies into electron avalanche photodiodes (EAPDs), for use in active/passive IR systems, and high operating temperature (HOT) detectors, which threaten to eventually offer BLIP photon detection at uncooled operating temperatures, over the whole IR spectrum from 1 to 12um.

Optical study of HgCdTe infrared photodetectors using internal photoemission spectroscopy

International Nuclear Information System (INIS)

Lao, Yan-Feng; Unil Perera, A. G.; Wijewarnasuriya, Priyalal S.

2014-01-01

We report a study of internal photoemission spectroscopy (IPE) applied to a n-type Hg 1−x Cd x Te/Hg 1−y Cd y Te heterojunction. An exponential line-shape of the absorption tail in HgCdTe is identified by IPE fittings of the near-threshold quantum yield spectra. The reduction of quantum yield (at higher photon energy) below the fitting value is explained as a result of carrier-phonon scatterings. In addition, the obtained bias independence of the IPE threshold indicates a negligible electron barrier at the heterojunction interface

Portraits in Praise of a People: A Rhetorical Analysis of Norman Rockwell's Icons in Franklin D. Roosevelt's "Four Freedoms" Campaign.

Science.gov (United States)

Olson, Lester C.

1983-01-01

Examines Rockwell's "Four Freedoms" posters and considers the historical circumstances during which they were mass-distributed. Observes how these paintings that praised the political and religious values of Americans were used to educate the people about the necessity of participation in World War II. (PD)

Extended short wavelength infrared HgCdTe detectors on silicon substrates

Science.gov (United States)

Park, J. H.; Hansel, D.; Mukhortova, A.; Chang, Y.; Kodama, R.; Zhao, J.; Velicu, S.; Aqariden, F.

2016-09-01

We report high-quality n-type extended short wavelength infrared (eSWIR) HgCdTe (cutoff wavelength 2.59 μm at 77 K) layers grown on three-inch diameter CdTe/Si substrates by molecular beam epitaxy (MBE). This material is used to fabricate test diodes and arrays with a planar device architecture using arsenic implantation to achieve p-type doping. We use different variations of a test structure with a guarded design to compensate for the lateral leakage current of traditional test diodes. These test diodes with guarded arrays characterize the electrical performance of the active 640 × 512 format, 15 μm pitch detector array.

Evaluation of Space Radiation Effects on HgCdTe Avalanche Photodiode Arrays for Lidar Applications

Science.gov (United States)

Sun, Xiaoli; Abshire, James B.; Lauenstein, Jean-Marie; Sullivan, William III; Beck, Jeff; Hubbs, John E.

2018-01-01

We report the results from proton and gamma ray radiation testing of HgCdTe avalanche photodiode (APD) arrays developed by Leonardo DRS for space lidar detectors. We tested these devices with both approximately 60 MeV protons and gamma rays, with and without the read out integrated circuit (ROIC). We also measured the transient responses with the device fully powered and with the APD gain from unity to greater than 1000. The detectors produced a large current impulse in response to each proton hit but the response completely recovered within 1 microsecond. The devices started to have persistent damage at a proton fluence of 7e10 protons/cm2, equivalent to 10 krad(Si) total ionization dose. The dark current became much higher after the device was warmed to room temperature and cooled to 80K again, but it completely annealed after baking at 85 C for several hours. These results showed the HgCdTe APD arrays are suitable for use in space lidar for typical Earth orbiting and planetary missions provided that provisions are made to heat the detector chip to 85 C for several hours after radiation damage becomes evident that system performance is impacted.

Comparison of Measured Dark Current Distributions with Calculated Damage Energy Distributions in HgCdTe

Science.gov (United States)

Marshall, C. J.; Marshall, P. W.; Howe, C. L.; Reed, R. A.; Weller, R. A.; Mendenhall, M.; Waczynski, A.; Ladbury, R.; Jordan, T. M.

2007-01-01

This paper presents a combined Monte Carlo and analytic approach to the calculation of the pixel-to-pixel distribution of proton-induced damage in a HgCdTe sensor array and compares the results to measured dark current distributions after damage by 63 MeV protons. The moments of the Coulombic, nuclear elastic and nuclear inelastic damage distributions were extracted from Monte Carlo simulations and combined to form a damage distribution using the analytic techniques first described in [1]. The calculations show that the high energy recoils from the nuclear inelastic reactions (calculated using the Monte Carlo code MCNPX [2]) produce a pronounced skewing of the damage energy distribution. While the nuclear elastic component (also calculated using the MCNPX) contributes only a small fraction of the total nonionizing damage energy, its inclusion in the shape of the damage across the array is significant. The Coulombic contribution was calculated using MRED [3-5], a Geant4 [4,6] application. The comparison with the dark current distribution strongly suggests that mechanisms which are not linearly correlated with nonionizing damage produced according to collision kinematics are responsible for the observed dark current increases. This has important implications for the process of predicting the on-orbit dark current response of the HgCdTe sensor array.

Massless Dirac fermions in semimetal HgCdTe

Science.gov (United States)

Marchewka, M.; Grendysa, J.; Żak, D.; Tomaka, G.; Śliż, P.; Sheregii, E. M.

2017-01-01

Magneto-transport results obtained for the strained 100 nm thick Hg1-x CdxTe (x=0.135) layer grown by MBE on the CdTe/GaAs substrate are interpreted by the 8×8 kp model with the in-plane tensile strain. The dispersion relation for the investigated structure proves that the Dirac point is located in the gap caused by the strain. It is also shown that the fan of the Landau Levels (LL's) energy calculated for topological protected surface states for the studied HgCdTe alloy corresponds to the fan of the LL's calculated using the graphen-like Hamiltonian which gives excellent agreement with the experimental data for velocity on the Fermi level equal to vf ≈ 0.85×106 m/s. That characterized strained Hg1-x CdxTe layers (0.13 < x < 0.14) are a perfect Topological Insulator with good perspectives of further applications.

Can graphene make better HgCdTe infrared detectors?

Directory of Open Access Journals (Sweden)

Shi Yanli

2011-01-01

Full Text Available Abstract We develop a simple and low-cost technique based on chemical vapor deposition from which large-size graphene films with 5-10 graphene layers can be produced reliably and the graphene films can be transferred easily onto HgCdTe (MCT thin wafers at room temperature. The proposed technique does not cause any thermal and mechanical damages to the MCT wafers. It is found that the averaged light transmittance of the graphene film on MCT thin wafer is about 80% in the mid-infrared bandwidth at room temperature and 77 K. Moreover, we find that the electrical conductance of the graphene film on the MCT substrate is about 25 times larger than that of the MCT substrate at room temperature and 77 K. These experimental findings suggest that, from a physics point of view, graphene can be utilized as transparent electrodes as a replacement for metal electrodes while producing better and cheaper MCT infrared detectors.

MTF measurement and analysis of linear array HgCdTe infrared detectors

Science.gov (United States)

Zhang, Tong; Lin, Chun; Chen, Honglei; Sun, Changhong; Lin, Jiamu; Wang, Xi

2018-01-01

The slanted-edge technique is the main method for measurement detectors MTF, however this method is commonly used on planar array detectors. In this paper the authors present a modified slanted-edge method to measure the MTF of linear array HgCdTe detectors. Crosstalk is one of the major factors that degrade the MTF value of such an infrared detector. This paper presents an ion implantation guard-ring structure which was designed to effectively absorb photo-carriers that may laterally defuse between adjacent pixels thereby suppressing crosstalk. Measurement and analysis of the MTF of the linear array detectors with and without a guard-ring were carried out. The experimental results indicated that the ion implantation guard-ring structure effectively suppresses crosstalk and increases MTF value.

Numerical analysis of three-colour HgCdTe detectors

Science.gov (United States)

Jóźwikowski, K.; Rogalski, A.

2007-12-01

The performance of three-colour HgCdTe photovoltaic heterostructure detector is examined theoretically. In comparison with two-colour detectors with two back-to-back junctions, three-colour structure contains an absorber of intermediate wavelength placed between two junctions and electronic barriers are used to isolate this intermediate region. This structure was first proposed by British workers. Three-detector structures with different localizations of separating barriers are analyzed. The calculation results are presented in the form of spatial distributions of bandgap energy and quantum efficiency. Enhanced original computer programs are applied to solve the system of non-linear continuity equations for carriers and Poisson equations. In addition, the numerical analysis includes the dependence of absorption coefficient on Burstein effect as well as interference effects in heterostructure with metallic electrical contacts. It is shown that the performance of the detector is critically dependent on the barrier’s doping level and position in relation to the junction. This behaviour is serious disadvantage of the considered three-colour detector. A small shift of the barrier location and doping level causes serious changes in spectral responsivity.

Numerical simulation of crosstalk in reduced pitch HgCdTe photon-trapping structure pixel arrays.

Science.gov (United States)

Schuster, Jonathan; Bellotti, Enrico

2013-06-17

We have investigated crosstalk in HgCdTe photovoltaic pixel arrays employing a photon trapping (PT) structure realized with a periodic array of pillars intended to provide broadband operation. We have found that, compared to non-PT pixel arrays with similar geometry, the array employing the PT structure has a slightly higher optical crosstalk. However, when the total crosstalk is evaluated, the presence of the PT region drastically reduces the total crosstalk; making the use of the PT structure not only useful to obtain broadband operation, but also desirable for reducing crosstalk in small pitch detector arrays.

High-Operating Temperature HgCdTe: A Vision for the Near Future

Science.gov (United States)

Lee, D.; Carmody, M.; Piquette, E.; Dreiske, P.; Chen, A.; Yulius, A.; Edwall, D.; Bhargava, S.; Zandian, M.; Tennant, W. E.

2016-09-01

We review recent advances in the HgCdTe material quality and detector performance achieved at Teledyne using molecular beam epitaxy growth and the double-layer planar hetero-junction (DLPH) detector architecture. By using an un-doped, fully depleted absorber, Teledyne's DLPH architecture can be extended for use in high operating temperatures and other applications. We assess the potential achievable performance for long wavelength infrared (LWIR) hetero-junction p-lightly-doped n or p-intrinsic- n (p-i-n) detectors based on recently reported results for 10.7 μm cutoff 1 K × 1 K focal plane arrays (FPAs) tested at temperatures down to 30 K. Variable temperature dark current measurements show that any Shockley-Read-Hall currents in the depletion region of these devices have lifetimes that are reproducibly greater than 100 ms. Under the assumption of comparable lifetimes at higher temperatures, it is predicted that fully-depleted background radiation-limited performance can be expected for 10- μm cutoff detectors from room temperature to well below liquid nitrogen temperatures, with room-temperature dark current nearly 400 times lower than predicted by Rule 07. The hetero-junction p-i-n diode is shown to have numerous other significant potential advantages including minimal or no passivation requirements for pBn-like processing, low 1/ f noise, compatibility with small pixel pitch while maintaining high modulation transfer function, low crosstalk and good quantum efficiency. By appropriate design of the FPA dewar shielding, analysis shows that dark current can theoretically be further reduced below the thermal equilibrium radiative limit. Modeling shows that background radiation-limited LWIR HgCdTe operating with f/1 optics has the potential to operate within √2 of background-limited performance at 215 K. By reducing the background radiation by 2/3 using novel shielding methods, operation with a single-stage thermo-electric-cooler may be possible. If the

Performances of a HGCDTE APD based direct detection lidar at 2 μm. Application to dial measurements

Science.gov (United States)

Gibert, Fabien; Dumas, Arnaud; Rothman, Johan; Edouart, Dimitri; Cénac, Claire; Pellegrino, Jessica

2018-04-01

A lidar receiver with a direct detection chain adapted to a HgCdTe APD based detector with electric cooling is associated to a 2.05 μm Ho :YLF pulsed dual wavelength single mode transmitter to provide the first atmospheric lidar measurements using this technology. Experiments confirm the outstanding sensitivity of the detector and hightligth its huge potential for DIAL measurements of trace gas (CO2 and H2O) in this spectral domain. Performances of coherent vs direct detection at 2.05 μm is assessed.

Performances of a HGCDTE APD based direct detection lidar at 2 μm. Application to dial measurements

Directory of Open Access Journals (Sweden)

Gibert Fabien

2018-01-01

Full Text Available A lidar receiver with a direct detection chain adapted to a HgCdTe APD based detector with electric cooling is associated to a 2.05 μm Ho :YLF pulsed dual wavelength single mode transmitter to provide the first atmospheric lidar measurements using this technology. Experiments confirm the outstanding sensitivity of the detector and hightligth its huge potential for DIAL measurements of trace gas (CO2 and H2O in this spectral domain. Performances of coherent vs direct detection at 2.05 μm is assessed.

Enhanced numerical analysis of three-color HgCdTe detectors

Science.gov (United States)

Jóźwikowski, K.; Rogalski, A.

2007-04-01

The performance of three-color HgCdTe photovoltaic heterostructure detector is examined theoretically. In comparison with two-color detectors with two back-to-back junctions, three-color structure contain an absorber of intermediate wavelength placed between two junctions, and electronic barriers are used to isolate this intermediate region. This structure was first proposed by British workers. Enhanced original computer programs are applied to solve the system of non-linear continuity equations for carriers and Poisson equations. In addition, the numerical analysis includes the dependence of absorption coefficient on Burstein effect as well as interference effects in heterostructure with metallic electrical contacts. Three detector structures with different localizations of separating barriers are analyzed. The calculations results are presented in the form of spatial distributions of bandgap energy and quantum efficiency. It is shown that the performance of the detector is critically dependent on the barrier's doping level and position in relation to the junction. This behavior is serious disadvantage of the considered three color detector. A small shift of the barrier location and doping level causes serious changes in spectral responsivity.

Performances of a HGCDTE APD Based Detector with Electric Cooling for 2-μm DIAL/IPDA Applications

Directory of Open Access Journals (Sweden)

Dumas A.

2016-01-01

Full Text Available In this work we report on design and testing of an HgCdTe Avalanche Photodiode (APD detector assembly for lidar applications in the Short Wavelength Infrared Region (SWIR : 1,5 - 2 μm. This detector consists in a set of diodes set in parallel -making a 200 μm large sensitive area- and connected to a custom high gain TransImpedance Amplifier (TIA. A commercial four stages Peltier cooler is used to reach an operating temperature of 185K. Crucial performances for lidar use are investigated : linearity, dynamic range, spatial homogeneity, noise and resistance to intense illumination.

Very high resolution detection of gamma radiation at room-temperature using P-I-N detectors of CdZnTe and HgCdTe

Science.gov (United States)

Hamilton, W. J.; Rhiger, D. R.; Sen, S.; Kalisher, M. H.; James, K.; Reid, C. P.; Gerrish, V.; Baccash, C. O.

1994-08-01

High-energy photon detectors have been constructed by engineering and fabricating p-i-n diode structures consisting of bulk CdZnTe and epitaxial HgCdTe. The p-i-n structure was obtained by liquid-phase epitaxial growth of p and n doped HgCdTe layers on 'intrinsic' CdZnTe material about 1mm thick and approximately 25mm square. Curve tracing shows I-V curves with diode characteristics having resistivity above 1011 Omega -cm and leakage current of less than 400 pA to about - 60V reverse bias on a typical test piece approximately 5 x 8 x 1 mm. Spectra of similar test pieces have been obtained at room temperature with various nuclear isotopic sources over the range of 22 keV to 662 keV which show exceptionally high energy resolution. Resolution as good as 1.82% FWHM was obtained for the 356 keV line of 133Ba with a P/V = 3.4. The performance of these detectors combined with contemporary infrared technology capable of fabricating 2D arrays of these II-VI materials opens up manifold exciting applications in astrophysics, medical, industrial, environmental, and defense spectroscopy and imaging.

Growth features of HgCdTe LPE layers

International Nuclear Information System (INIS)

Huseynov, E.K.; Eminov, Sh.O.; Ibragimov, T.I.; Ismaylov, N.J.; Rajabli, A.A.

2010-01-01

Full text : The results of growth of Hg 1 -xCd x Te (MCT) layers by liquid phase epitaxy (LPE) from Te-rich solutions (molar fraction (Hg 1 -zCd z )(1.y)Te y , z=0.054, y=0.805 for TL=501 degrees Celsium) obtained by the tipping method in closed system is presented. Epitaxial layers with different compositions (x=0.20-0.22) and thicknesses (10-20 μm) suitable for manufacturing the photodiode structures operable at 8-14 μm spectrum range were grown on B oriented Cd 0 .96Zn 0 ,04Te polished and repolished substrates. The growth was carried out in the temperature range 500-480 degrees Celsium with cooling rates 0.05-0.1 degrees Celsium/min in a sealed quartz ampoule using the original apparatus for LPE. The attention was paid mainly to the surface morphological quality, good decantation from the layers, uniformity of composition and thickness of films. One of the limitations of the most LPE growth apparatus (cassettes) with slider or tipping system is their impossibility to wipe the last drop of growth solution from the surface of just-grown epilayer. Some remnant or residual of the growth solution tends to adhere to the surface of the epilayer after growth in such apparatus and strongly affect the surface quality. The novel apparatus for LPE providing the surface without unwanted residual drops of melt solution of Hg, Cd and Te was developed with the aim of solving such a problem. The effect of different steps of LPE growth on morphology and composition of epitaxial layers was studied. By holding the CdZnTe substrate inside the growth ampoule at the melt homogenization temperature during of 15-50 min without contact with the melt resulted in visually (using the Leitzorthoplan microscopes x 500-1000) observed surface roughness. Using the expressions for the Te-angle of Hg-Cd-Te phase diagram the effect of the preliminary synthesis of the source on liquidus temperature and composition of the epilayers was numerically evaluated. HgCdTe layers were characterized using

Correlation of Etch Pits and Dislocations in As-grown and Thermal Cycle-Annealed HgCdTe(211) Films

Science.gov (United States)

Vaghayenegar, M.; Jacobs, R. N.; Benson, J. D.; Stoltz, A. J.; Almeida, L. A.; Smith, David J.

2017-08-01

This paper reports observations of the different types of etch pits and dislocations present in thick HgCdTe (211) layers grown by molecular beam epitaxy on CdTe/Si (211) composite substrates. Dislocation analysis for as-grown and thermal cycle-annealed samples has been carried out using bright-field transmission electron microscopy. Triangular pits present in as-grown material are associated with a mixture of Frank partials and perfect dislocations, while pits with fish-eye shapes have perfect dislocations with 1/2[0\\bar{1}1] Burgers vector. The dislocations beneath skew pits are more complex as they have two different crystallographic directions, and are associated with a mixture of Shockley partials and perfect dislocations. Dislocation analysis of samples after thermal cycle annealing (TCA) shows that the majority of dislocations under the etch pits are short segments of perfect dislocations with 1/2[0\\bar{1}1] Burgers vector while the remainder are Shockley partials. The absence of fish-eye shape pits in TCA samples suggests that they are associated with mobile dislocations that have reacted during annealing, causing the overall etch pit density to be reduced. Very large pits with a density ˜2×103 cm-2 are observed in as-grown and TCA samples. These defects thread from within the CdTe buffer layer into the upper regions of the HgCdTe layers. Their depth in as-grown material is so large that it is not possible to locate and identify the underlying defects.

Structural properties of layers of HgCdTe, grown by the laser epitaxy method on silicon substrates

International Nuclear Information System (INIS)

Plyatsko, S.V.; Vergush, M.M.; Litvin, P.M.; Kozirjev, Yu.M.; Shevlyakov, S.A.

2001-01-01

Thin films (0.1-1.5 μm) of HgCdTe on substrates Si (100) and Si (111) from monocrystal and pressed sources Hg 1-x Cd x Te (x=0.22) sprayed by laser IR radiation were grown and are investigated. The concentration of macro defects (drops) on the surface of films is determined by the relation of the diameter of a laser beam and depth of the crater, formed by laser irradiation. The size of crystal grains almost does not depend on the temperature of a substrate and power densities of a laser radiation and increases with the thickness of a layer

HgCdTe Avalanche Photodiode Detectors for Airborne and Spaceborne Lidar at Infrared Wavelengths

Science.gov (United States)

Sun, Xiaoli; Abshire, James B.; Beck, Jeffrey D.; Mitra, Pradip; Reiff, Kirk; Yang, Guangning

2017-01-01

We report results from characterizing the HgCdTe avalanche photodiode (APD) sensorchip assemblies (SCA) developed for lidar at infrared wavelength using the high density vertically integrated photodiodes (HDVIP) technique. These devices demonstrated high quantum efficiency, typically greater than 90 between 0.8 micrometers and the cut-off wavelength, greater than 600 APD gain, near unity excess noise factor, 6-10 MHz electrical bandwidth and less than 0.5 fW/Hz(exp.1/2) noise equivalent power (NEP). The detectors provide linear analog output with a dynamic range of 2-3 orders of magnitude at a fixed APD gain without averaging, and over 5 orders of magnitude by adjusting the APD and preamplifier gain settings. They have been successfully used in airborne CO2 and CH4 integrated path differential absorption (IPDA) lidar as a precursor for space lidar applications.

Final report on APMP.M.H-S3: Comparison on hardness measurement Rockwell scale A and B

Science.gov (United States)

Sanponpute, Tassanai; Meesaplak, Apichaya; Menelao, Febo; Chan, T. K.; Bahng, Gun-Woong; Titus, S. S. K.; Jain, S. K.

2012-01-01

The APMP.M.H-S3 Rockwell hardness intercomparison was initiated by NIMT, Thailand and the required protocol was prepared by NIMT and checked by Dr John Man, MNIA, Australia, in 2009. PTB, Germany, Standards and Calibration Laboratory (SCL), Hong Kong, National Physical Laboratory (NPLI), India, and Korea Research Institute of Standards and Science (KRISS), Korea, participated in this comparison. This comparison exercise was focused on the measurement range of 25 to 100 HRBW scale and 35 to 85 HRA scale. The round robin test was done during the period from April 2010 to October 2010. The participating laboratories have demonstrated the capability of the machine and the operating conditions according to ISO 6508 Part 3 to perform the measurements. However, SCL, Hong Kong, could demonstrate their capability to perform the measurements only according to ISO 6508 Part 2. The CMCs declared by the different laboratories lie in the range of 0.30 HRA to 0.40 HRA and 0.40 HRBW to 0.75 HRBW. The CMC declared by SCL for the Rockwell B scale is 1.5 HRBW for the reason described above. It is observed from the results that the measurement uncertainty is estimated not less than the CMCs declared by the laboratories. From the measurement results provided by all the participating laboratories, the En ratio was determined to establish the degrees of equivalence. The En ratio was calculated by including as well as by excluding the results of the laboratory which has performed the test according to ISO 6508 Part 2 in order to make sure that it does not affect the overall results. It is noticed that the En ratio was still found to remain less than 1. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the APMP, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

HgCdTe APD-based linear-mode photon counting components and ladar receivers

Science.gov (United States)

Jack, Michael; Wehner, Justin; Edwards, John; Chapman, George; Hall, Donald N. B.; Jacobson, Shane M.

2011-05-01

Linear mode photon counting (LMPC) provides significant advantages in comparison with Geiger Mode (GM) Photon Counting including absence of after-pulsing, nanosecond pulse to pulse temporal resolution and robust operation in the present of high density obscurants or variable reflectivity objects. For this reason Raytheon has developed and previously reported on unique linear mode photon counting components and modules based on combining advanced APDs and advanced high gain circuits. By using HgCdTe APDs we enable Poisson number preserving photon counting. A metric of photon counting technology is dark count rate and detection probability. In this paper we report on a performance breakthrough resulting from improvement in design, process and readout operation enabling >10x reduction in dark counts rate to ~10,000 cps and >104x reduction in surface dark current enabling long 10 ms integration times. Our analysis of key dark current contributors suggest that substantial further reduction in DCR to ~ 1/sec or less can be achieved by optimizing wavelength, operating voltage and temperature.

Numerical simulation of quantum efficiency and surface recombination in HgCdTe IR photon-trapping structures

Science.gov (United States)

Schuster, Jonathan; Bellotti, Enrico

2013-06-01

We have investigated the quantum effiency in HgCdTe photovoltaic pixel arrays employing a photon-trapping structure realized with a periodic array of pillars intended to provide broadband operation. We have found that the quantum efficiency depends heavily on the passivation of the pillar surface. Pillars passivated with anodicoxide have a large fixed positive charge on the pillar surface. We use our three-dimensional numerical simulation model to study the effect of surface charge and surface recombination velocity on the exterior of the pillars. We then evaluate the quantum efficiency of this structure subject to different surface conditions. We have found that by themselves, the surface charge and surface recombination are detrimental to the quantum efficiency but the quantum efficiency is recovered when both phenomena are present. We will discuss the effects of these phenomena and the trade offs that exist between the two.

Growth characteristics of (100)HgCdTe layers in low-temperature MOVPE with ditertiarybutyltelluride

Science.gov (United States)

Yasuda, K.; Hatano, H.; Ferid, T.; Minamide, M.; Maejima, T.; Kawamoto, K.

1996-09-01

Low-temperature growth of (100)HgCdTe (MCT) layers in MOVPE has been studied using ditertiarybutyltelluride (DtBTe), dimethylcadmium (DMCd), and elementary mercury as precursors. MCT layers were grown at 275°C on (100)GaAs substrates. Growths were carried out in a vertical growth cell which has a narrow spacing between the substrate and cell ceiling. Using the growth cell, the Cd-composition ( x) of MCT layers was controlled over a wide range from 0 to 0.98 by the DMCd flow. The growth rate of the MCT layers was constant at 5 μm h -1 for the increased DMCd flow. Preferential Cd-incorporation into MCT layers and an increase of the growth rate were observed in the presence of mercury vapor. The growth characteristics were considered to be due to the alkyl-exchange reaction between DMCd and mercury. The electrical properties and crystallinity of grown layers were also evaluated, which showed that layers with high quality can be grown at 275°C.

Study of CdTe and HgCdTe thin films obtained by electrochemical methods

International Nuclear Information System (INIS)

Guillen, C.

1990-01-01

Cadmium telluride polycrystalline thin films were fabricated on SnO 2 -coated glass substrates by potentiostatic electrodeposition and characterized by X-ray diffraction, energy dispersive X-ray analyses (EDAX), optical and electrical measurements. The films dseposited at potentials more positive than -0.65 V vs.SCE were p-type but those deposited at more negative potentials were n-type. All CdTe thin films showed a band-gap energy about 1.45 eV and a large absorption coeffici-ent (a=10 5 cm -1 ) above de band edge. The addition of even small amounts of mercury to the CdTe produces higuer conductivity values and lower band-gap energies. We have prepared HgCdTe thin films where the band-gap energies ranged between 0.93 and 0.88 eV depending on the ratio of mercury to cadmium. Heat treatment at 300 0 C increases the crystalline diameter and alter the composition of the electrodeposited films, a decrease of the resistivity values was also observed. (Author)

Highly Efficient Spin-to-Charge Current Conversion in Strained HgTe Surface States Protected by a HgCdTe Layer

Science.gov (United States)

Noel, P.; Thomas, C.; Fu, Y.; Vila, L.; Haas, B.; Jouneau, P.-H.; Gambarelli, S.; Meunier, T.; Ballet, P.; Attané, J. P.

2018-04-01

We report the observation of spin-to-charge current conversion in strained mercury telluride at room temperature, using spin pumping experiments. We show that a HgCdTe barrier can be used to protect the HgTe from direct contact with the ferromagnet, leading to very high conversion rates, with inverse Edelstein lengths up to 2.0 ±0.5 nm . The influence of the HgTe layer thickness on the conversion efficiency is found to differ strongly from what is expected in spin Hall effect systems. These measurements, associated with the temperature dependence of the resistivity, suggest that these high conversion rates are due to the spin momentum locking property of HgTe surface states.

The Effect of Metal-Semiconductor Contact on the Transient Photovoltaic Characteristic of HgCdTe PV Detector

Directory of Open Access Journals (Sweden)

Haoyang Cui

2013-01-01

Full Text Available The transient photovoltaic (PV characteristic of HgCdTe PV array is studied using an ultrafast laser. The photoresponse shows an apparent negative valley first, then it evolves into a positive peak. By employing a combined theoretical model of pn junction and Schottky potential, this photo-response polarity changing curves can be interpreted well. An obvious decreasing of ratio of negative valley to positive peak can be realized by limiting the illumination area of the array electrode. This shows that the photoelectric effect of Schottky barrier at metal-semiconductor (M/S interface is suppressed, which will verify the correctness of the model. The characteristic parameters of transient photo-response induced from p-n junction and Schottky potential are extracted by fitting the response curve utilizing this model. It shows that the negative PV response induced by the Schottky barrier decreases the positive photovoltage generated by the pn junction.

Ultra-Low Dark Current HgCdTe Detector in SWIR for Space Applications

Science.gov (United States)

Cervera, C.; Boulade, O.; Gravrand, O.; Lobre, C.; Guellec, F.; Sanson, E.; Ballet, P.; Santailler, J. L.; Moreau, V.; Zanatta, J. P.; Fieque, B.; Castelein, P.

2017-10-01

This paper presents recent developments at Commissariat à l'Energie atomique, Laboratoire d'Electronique et de Technologie de l'Information infrared laboratory on processing and characterization of p-on- n HgCdTe (MCT) planar infrared focal plane arrays (FPAs) in short-wave infrared (SWIR) spectral band for the astrophysics applications. These FPAs have been grown using both liquid phase epitaxy and molecular beam epitaxy on a lattice-matched CdZnTe substrate. This technology exhibits lower dark current and lower series resistance in comparison with n-on- p vacancy-doped architecture and is well adapted for low flux detection or high operating temperature. This architecture has been evaluated for space applications in long-wave infrared and very-long-wave infrared spectral bands with cut-off wavelengths from 10 μm up to 17 μm at 78 K and is now evaluated for the SWIR range. The metallurgical nature of the absorbing layer is also examined and both molecular beam epitaxy and liquid phase epitaxy have been investigated. Electro-optical characterizations have been performed on individual photodiodes from test arrays, whereas dark current investigation has been performed with a fully functional readout integrated circuit dedicated to low flux operations.

SWIR HgCdTe avalanche photiode focal plane array performances evaluation

Science.gov (United States)

de Borniol, E.; Rothman, J.; Salveti, F.; Feautrier, P.

2017-11-01

One of the main challenges of modern astronomical instruments like adaptive optics (AO) systems or fringe trackers is to deal with the very low photons flux detection scenarios. The typical timescale of atmospheric turbulences being in the range of some tens of milliseconds, infrared wavefront sensors for AO systems needs frame rates higher than 1 KHz leading to integration times lower than 1 ms. This integration time associated with a low irradiance results in a few number of integrated photons per frame per pixel. To preserve the information coming from this weak signal, the focal plane array (FPA) has to present a low read out noise, a high quantum efficiency and a low dark current. Up to now, the output noise of high speed near infrared sensors is limited by the silicon read out circuit noise. The use of HgCdTe avalanche photodiodes with high gain at moderate reverse bias and low excess noise seems then a logical way to reduce the impact of the read noise on images signal to noise ratio. These low irradiance passive imaging applications with integration times in the millisecond range needs low photodiode dark current and low background current. These requirements lead to the choice of the photodiode cut off wavelength. The short wave infrared (SWIR) around 3 μm is a good compromise between the gain that can be obtain for a given APD bias and the background and dark current. The CEA LETI HgCdTe APD technology, and a fine analysis of the gain curve characteristic are presented in [1] and won't be detailed here. The response time of the APD is also a key factor for a high frame rate FPA. This parameter has been evaluated in [2] and the results shows cut off frequencies in the GHz range. In this communication we report the performances of a SWIR APD FPA designed and fabricated by CEA LETI and SOFRADIR for astrophysical applications. This development was made in the frame of RAPID, a 4 years R&D project funded by the French FUI (Fond Unique Interministériel). This

Post remedial action survey report for Building 003, Santa Susana Field Laboratories, Rockwell International, Ventura County, California, October 1981; April 1982. Surplus Facilities Management Program

International Nuclear Information System (INIS)

Wynveen, R.A.; Smith, W.H.; Sholeen, C.M.; Justus, A.L.; Flynn, K.F.

1983-10-01

Rockwell International's Santa Susana Laboratories in Ventura County, California, have been the site of numerous Federally-funded projects involving the use of radioactive materials. One such project was the System for Nuclear Auxiliary Power (SNAP) Program. Building 003 on the Santa Susana site was used in conjunction with the SNAP Program and contained a highly shielded area designed for remote manipulation of radioactive materials. Such facilities are commonly referred to as hot caves. During the SNAP Program, fuel burnup samples were analyzed and irradiation experiments were evaluated in the Building 003 hot cave. Use of the hot cave facility ended when the SNAP Program was terminated in 1973. Subsequently, the Building 003 facilities were declared excess and were decontaminaed and decommissioned during the first half of calendar year 1975. At that time, the building was given a preliminary release. In 1981, a post-remedial-action (certification) survey of Building 003 was conducted at the request of the Department of Energy. Significant levels of residual contamination were found in various parts of the building. Consequently, additional decontamination was conducted by Rockwell International. A final post-remedial-action survey was conducted during April 1982, and those areas in Building 003 that had been found contaminated in 1981 were now found to be free of detectable radioactive contamination. Sludge samples taken from the sewer sump showed elevated levels of enriched uranium contaminant. Hence, all sewer lines within Building 003 were removed. This permitted unconditional release of the building for unrestricted use. However, the sewer lines exterior to the building, which remain in place, must be considered potentially contaminated and, therefore, subject to restricted use

Annealing of Co-Cr dental alloy: effects on nanostructure and Rockwell hardness.

Science.gov (United States)

Ayyıldız, Simel; Soylu, Elif Hilal; Ide, Semra; Kılıç, Selim; Sipahi, Cumhur; Pişkin, Bulent; Gökçe, Hasan Suat

2013-11-01

The aim of the study was to evaluate the effect of annealing on the nanostructure and hardness of Co-Cr metal ceramic samples that were fabricated with a direct metal laser sintering (DMLS) technique. Five groups of Co-Cr dental alloy samples were manufactured in a rectangular form measuring 4 × 2 × 2 mm. Samples fabricated by a conventional casting technique (Group I) and prefabricated milling blanks (Group II) were examined as conventional technique groups. The DMLS samples were randomly divided into three groups as not annealed (Group III), annealed in argon atmosphere (Group IV), or annealed in oxygen atmosphere (Group V). The nanostructure was examined with the small-angle X-ray scattering method. The Rockwell hardness test was used to measure the hardness changes in each group, and the means and standard deviations were statistically analyzed by one-way ANOVA for comparison of continuous variables and Tukey's HSD test was used for post hoc analysis. P values of directly affected both the nanostructure and hardness of the Co-Cr alloy. Group III exhibited a non-homogeneous structure and increased hardness (48.16 ± 3.02 HRC) because the annealing process was incomplete and the inner stress was not relieved. Annealing in argon atmosphere of Group IV not only relieved the inner stresses but also decreased the hardness (27.40 ± 3.98 HRC). The results of fitting function presented that Group IV was the most homogeneous product as the minimum bilayer thickness was measured (7.11 Å). After the manufacturing with DMLS technique, annealing in argon atmosphere is an essential process for Co-Cr metal ceramic substructures. The dentists should be familiar with the materials that are used in clinic for prosthodontics treatments.

Post-remedial-action survey report for Kinetic Experiment Water Boiler Reactor Facility, Santa Susana Field Laboratories, Rockwell International, Ventura County, California

International Nuclear Information System (INIS)

Wynveen, R.A.; Smith, W.H.; Sholeen, C.M.; Flynn, K.F.; Justus, A.L.

1981-10-01

Rockwell International's Santa Susana Laboratories in Ventura County, California, have been the site of numerous federally-funded contracted projects involving the use of radioactive materials. Among these was the Kinetics Experiment Water Boiler (KEWB) Reactor which was operated under the auspices of the US Atomic Energy Commission (AEC). The KEWB Reactor was last operated in 1966. The facility was subsequently declared excess and decontamination and decommissioning operations were conducted during the first half of calendar year 1975. The facility was completely dismantled and the site graded to blend with the surrounding terrain. During October 1981, a post-remedial-action (certification) survey of the KEWB site was conducted on the behalf of the US Department of Energy by the Radiological Survey Group (RSG) of the Occupational Health and Safety Division's Health Physics Section (OHS/HP) of Argonne National Laboratory (ANL). The survey confirmed that the site was free from contamination and could be released for unrestricted use

An Experiment to Study Sporadic Sodium Layers in the Earth's Mesosphere and Lower Thermosphere

Science.gov (United States)

Swenson, Charles M.

2002-01-01

The Utah State University / Space Dynamics Lab was funded under a NASA Grant. This investigation has been part of Rockwell Universities Sudden Atom Layer Investigation (SAL). USU/SDL provided an electron density measurement instrument, the plasma frequency probe, which was launched on the vehicle 21.117 from Puerto-Rico in February of 1998. The instrument successfully measured electron density as designed and measurement techniques included in this version of the Plasma Frequency probe provided valuable insight into the electron density structures associated with sudden sodium layers in a collisional plasma. Electron density data was furnished to Rockwell University but no science meetings were held by Rockwell Data from the instrument was presented to the scientific community at the URSI General Session in 1999. A paper is in preparation for publication in Geophysical Research Letters. The following document provides a summary of the experiment and data obtained as a final report on this grant.

Modelo analítico rizomático para el estudio de los efectos de las políticas educativas regionales en la experiencia escolar cotidiana: las perspectivas de Rockwell, Bourdieu y Ball

Directory of Open Access Journals (Sweden)

Silvana Lorena Lagoria

Full Text Available Resumen: La escuela cotidiana se comprende en parte por un particular trasfondo que tiñe toda la experiencia que allí se desarrolla. Ese trasfondo lo constituye la cultura escolar. En su construcción intervienen tanto prácticas internas como externas a la escuela, entre ellas, las políticas educativas. La influencia de las políticas educativas regionales sobre la conformación de la cultura institucional en el devenir del cotidiano escolar se plantea como un interesante y complejo objeto a desentrañar. Para emprender ese camino es importante construir una base teórica consistente a partir de la conjunción de diferentes fuentes. En términos de Tello (2015, esto implica concebir un sustento teórico rizomático como base para analizar la cultura escolar en el marco de la “escuela cotidiana” (Rockwell, 2000. En definitiva, lo que planteamos aquí es la necesidad de construir un eje epistemológico potente para hacer inteligibles los efectos de las políticas educativas en el cotidiano escolar. En ese sentido, el presente trabajo se propone interrelacionar un conjunto de perspectivas teóricas a modo de red, para comprender un aspecto intrínseco de la escuela: los efectos de las políticas educativas en la cultura institucional. En primer lugar, definimos qué entendemos por cultura y cultura institucional. A continuación proponemos nuestro modelo analítico rizomático, integrando los aportes teóricos de Rockwell, Bourdieu y Ball. Finalmente, en las conclusiones, realizamos una breve integración de las ideas expuestas en el cuerpo de este trabajo.

Effect of surface fields on the dynamic resistance of planar HgCdTe mid-wavelength infrared photodiodes

Energy Technology Data Exchange (ETDEWEB)

He, Kai; Wang, Xi; Zhang, Peng; Chen, Yi-Yu [Key Laboratory of Infrared Imaging Materials and Detectors, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Zhou, Song-Min; Xie, Xiao-Hui; Lin, Chun, E-mail: chun-lin@mail.sitp.ac.cn; Ye, Zhen-Hua; Wang, Jian-Xin; Zhang, Qin-Yao, E-mail: qinyao@mail.sitp.ac.cn [Key Laboratory of Infrared Imaging Materials and Detectors, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083 (China); Li, Yang [Graduate School of Information Science and Technology, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan)

2015-05-28

This work investigates the effect of surface fields on the dynamic resistance of a planar HgCdTe mid-wavelength infrared photodiode from both theoretical and experimental aspects, considering a gated n-on-p diode with the surface potential of its p-region modulated. Theoretical models of the surface leakage current are developed, where the surface tunnelling current in the case of accumulation is expressed by modifying the formulation of bulk tunnelling currents, and the surface channel current for strong inversion is simulated with a transmission line method. Experimental data from the fabricated devices show a flat-band voltage of V{sub FB}=−5.7 V by capacitance-voltage measurement, and then the physical parameters for bulk properties are determined from the resistance-voltage characteristics of the diode working at a flat-band gate voltage. With proper values of the modeling parameters such as surface trap density and channel electron mobility, the theoretical R{sub 0}A product and corresponding dark current calculated from the proposed model as functions of the gate voltage V{sub g} demonstrate good consistency with the measured values. The R{sub 0}A product remarkably degenerates when V{sub g} is far below or above V{sub FB} because of the surface tunnelling current or channel current, respectively; and it attains the maximum value of 5.7×10{sup 7} Ω · cm{sup 2} around the transition between surface depletion and weak inversion when V{sub g}≈−4 V, which might result from reduced generation-recombination current.

Four critical facilities: their capabilities and programs

International Nuclear Information System (INIS)

Whitesides, G.E.

1980-01-01

Information is presented on the critical experiments facilities at Babcock and Wilcox, Lynchburg, Virginia; at Battelle Pacific Northwest Laboratory in Hanford, Washington; at Rockwell-International in Rocky Flats, Colorado; and at Los Alamos Scientific Laboratory in New Mexico. It is noted that the critical mass facilities which still exist in this country represent a bare minimum for maintaining a measurement program sufficient for meeting data requirements

Results of investigations of an 0.010-scale 140A/B configuration (model 72-OTS) of the Rockwell International space shuttle orbiter in the NASA/Langley Research Center unitary plan wind tunnel

Science.gov (United States)

Petrozzi, M. T.; Milam, M. D.

1975-01-01

Experimental aerodynamic investigations were conducted in the NASA/Langley unitary plan wind tunnel on a sting mounted 0.010-scale outer mold line model of the 140A/B configuration of the Rockwell International Space Shuttle Vehicle. The primary test objectives were to obtain: (1) six component force and moment data for the mated vehicle at subsonic and transonic conditions, (2) effects of configuration build-up, (3) effects of protuberances, ET/orbiter fairings and attach structures, and (4) elevon deflection effects on wing bending moment. Six component aerodynamic force and moment data and base and balance cavity pressures were recorded over Mach numbers of 1.6, 2.0, 2.5, 2.86, 3.9, and 4.63 at a nominal Reynolds number of 20 to the 6th power per foot. Selected configurations were tested at angles of attack and sideslip from -10 deg to +10 deg. For all configurations involving the orbiter, wing bending, and torsion coefficients were measured on the right wing.

Technical program plan, Basalt Waste Isolation Project

International Nuclear Information System (INIS)

1979-12-01

The Basalt Waste Isolation Project (BWIP) program as administered by the DOE's Richland Operations Office and Rockwell Hanford Operations is described. The objectives, scope and scientific technologies are discussed. The work breakdown structure of the project includes: project management and support, systems integration, geosciences, hydrology, engineered barriers, test facility design and construction, engineering testing, repository studies, and schedules. The budget of the program including operating and capital cost control is also included

Infrared focal plane array producibility and related materials; Proceedings of the Meeting, Orlando, FL, Apr. 20, 21, 1992

Science.gov (United States)

Balcerak, Ray; Pellegrini, Paul W.; Scribner, Dean A.

The present conference discusses the commercial diversification of the U.S. IR detector industry's commercial diversification, HgCdTe focal-plane array (FPAs) manufacture, LPE of (Hg,Cd)Te FPAs, uncooled IR FPA detector producibility, a high performance staring IR camera, and novel technologies for FPA dewars. Also discussed are hybridizing FPAs, cryoprober test development, HgCdTe on Si for monolithic focal plane arrays, popcorn noise in linear InGaAs detector arrays, and the use of narrowband laser speckle for MTF characterization of CCDs. (No individual items are abstracted in this volume)

Scientific instruments, scientific progress and the cyclotron

International Nuclear Information System (INIS)

Baird, David; Faust, Thomas

1990-01-01

Philosophers speak of science in terms of theory and experiment, yet when they speak of the progress of scientific knowledge they speak in terms of theory alone. In this article it is claimed that scientific knowledge consists of, among other things, scientific instruments and instrumental techniques and not simply of some kind of justified beliefs. It is argued that one aspect of scientific progress can be characterized relatively straightforwardly - the accumulation of new scientific instruments. The development of the cyclotron is taken to illustrate this point. Eight different activities which promoted the successful completion of the cyclotron are recognised. The importance is in the machine rather than the experiments which could be run on it and the focus is on how the cyclotron came into being, not how it was subsequently used. The completed instrument is seen as a useful unit of scientific progress in its own right. (UK)

InAs/GaSb type-II superlattice infrared detectors: three decades of development

Science.gov (United States)

Rogalski, A.; Kopytko, M.; Martyniuk, P.

2017-02-01

Recently, there has been considerable progress towards III-V antimonide-based low dimensional solids development and device design innovations. From a physics point of view, the type-II InAs/GaSb superlattice is an extremely attractive proposition. Their development results from two primary motivations: the perceived challenges of reproducibly fabricating high-operability HgCdTe FPAs at reasonable cost and theoretical predictions of lower Auger recombination for type-II superlattice (T2SL) detectors compared to HgCdTe. Lower Auger recombination should be translated into a fundamental advantage for T2SL over HgCdTe in terms of lower dark current and/or higher operating temperature, provided other parameters such as Shockley-Read-Hall lifetime are equal. Based on these promising results it is obvious now that the InAs/GaSb superlattice technology is competing with HgCdTe third generation detector technology with the potential advantage of standard III-V technology to be more competitive in costs and as a consequence series production pricing. Comments to the statement whether the superlattice IR photodetectors can outperform the "bulk" narrow gap HgCdTe detectors is one of the most important questions for the future of IR photodetectors presented by Rogalski at the April 2006 SPIE meeting in Orlando, Florida, are more credible today and are presented in this paper. It concerns the trade-offs between two most competing IR material technologies: InAs/GaSb type-II superlattices and HgCdTe ternary alloy system.

SALTON SEA SCIENTIFIC DRILLING PROJECT: SCIENTIFIC PROGRAM.

Science.gov (United States)

Sass, J.H.; Elders, W.A.

1986-01-01

The Salton Sea Scientific Drilling Project, was spudded on 24 October 1985, and reached a total depth of 10,564 ft. (3. 2 km) on 17 March 1986. There followed a period of logging, a flow test, and downhole scientific measurements. The scientific goals were integrated smoothly with the engineering and economic objectives of the program and the ideal of 'science driving the drill' in continental scientific drilling projects was achieved in large measure. The principal scientific goals of the project were to study the physical and chemical processes involved in an active, magmatically driven hydrothermal system. To facilitate these studies, high priority was attached to four areas of sample and data collection, namely: (1) core and cuttings, (2) formation fluids, (3) geophysical logging, and (4) downhole physical measurements, particularly temperatures and pressures.

Effect of thermal stress on the performance of HgCdTe/Si diodes and FPAs

International Nuclear Information System (INIS)

Zhang, Shan; Hu, Xiao-Ning

2012-01-01

As a typical hetero-epitaxial material, the HgCdTe film which directly grows on the Si substrate possesses great residual stress for the large lattice and thermal expansion mismatch. Thermal stress caused by the thermal expansion mismatch dominates the stress mechanism after growth and seriously affects the device performance. In this paper, the performance of the HgCdTe/Si material, diodes and focal plane arrays under different thermal stress condition was studied. The experimental results indicate that the performance regularly changes with the thermal stress and all the results can be duplicated and recoverable. By analyzing the changes of the energy band under different stress conditions, it was found that the stress in the HgCdTe film impacts the film's characteristics. The HgCdTe film with tensile stress exhibits higher electron mobility, while with the compressive stress, the film exhibits higher hole mobility than that of the bulk HgCdTe crystal. Finally, the theoretical analysis can explain the experimental results well. (paper)

EFSA Scientific Committee; Scientific Opinion on Risk Assessment Terminology

DEFF Research Database (Denmark)

Hald, Tine

of improving the expression and communication of risk and/or uncertainties in the selected opinions. The Scientific Committee concluded that risk assessment terminology is not fully harmonised within EFSA. In part this is caused by sectoral legislation defining specific terminology and international standards......The Scientific Committee of the European Food Safety Authority (EFSA) reviewed the use of risk assessment terminology within its Scientific Panels. An external report, commissioned by EFSA, analysed 219 opinions published by the Scientific Committee and Panels to recommend possible ways......, the Scientific Committee concludes that particular care must be taken that the principles of CAC, OIE or IPPC are followed strictly. EFSA Scientific Panels should identify which specific approach is most useful in dealing with their individual mandates. The Scientific Committee considered detailed aspects...

The Effectiveness of Scientific Inquiry With/Without Integration of Scientific Reasoning

Science.gov (United States)

Chen, Chun-Ting; She, Hsiao-Ching

2015-01-01

This study examines the difference in effectiveness between two scientific inquiry programs-one with an emphasis on scientific reasoning and one without a scientific reasoning component-on students' scientific concepts, scientific concept-dependent reasoning, and scientific inquiry. A mixed-method approach was used in which 115 grade 5…

Analysis of the auger recombination rate in P+N-n-N-N HgCdTe detectors for HOT applications

Science.gov (United States)

Schuster, J.; Tennant, W. E.; Bellotti, E.; Wijewarnasuriya, P. S.

2016-05-01

Infrared (IR) photon detectors must be cryogenically cooled to provide the highest possible performance, usually to temperatures at or below ~ 150K. Such low operating temperatures (Top) impose very stringent requirements on cryogenic coolers. As such, there is a constant push in the industry to engineer new detector architectures that operate at higher temperatures, so called higher operating temperature (HOT) detectors. The ultimate goal for HOT detectors is room temperature operation. While this is not currently possibly for photon detectors, significant increases in Top are nonetheless beneficial in terms of reduced size, weight, power and cost (SWAP-C). The most common HgCdTe IR detector architecture is the P+n heterostructure photodiode (where a capital letter indicates a wide band gap relative to the active layer or "AL"). A variant of this architecture, the P+N-n-N-N heterostructure photodiode, should have a near identical photo-response to the P+n heterostructure, but with significantly lower dark diffusion current. The P+N-n-N-N heterostructure utilizes a very low doped AL, surrounded on both sides by wide-gap layers. The low doping in the AL, allows the AL to be fully depleted, which drastically reduces the Auger recombination rate in that layer. Minimizing the Auger recombination rate reduces the intrinsic dark diffusion current, thereby increasing Top. Note when we use the term "recombination rate" for photodiodes, we are actually referring to the net generation and recombination of minority carriers (and corresponding dark currents) by the Auger process. For these benefits to be realized, these devices must be intrinsically limited and well passivated. The focus of this proceeding is on studying the fundamental physics of the intrinsic dark currents in ideal P+N-n-N-N heterostructures, namely Auger recombination. Due to the complexity of these devices, specifically the presence of multiple heterojunctions, numerical device modeling techniques must be

Accelerating the scientific exploration process with scientific workflows

International Nuclear Information System (INIS)

Altintas, Ilkay; Barney, Oscar; Cheng, Zhengang; Critchlow, Terence; Ludaescher, Bertram; Parker, Steve; Shoshani, Arie; Vouk, Mladen

2006-01-01

Although an increasing amount of middleware has emerged in the last few years to achieve remote data access, distributed job execution, and data management, orchestrating these technologies with minimal overhead still remains a difficult task for scientists. Scientific workflow systems improve this situation by creating interfaces to a variety of technologies and automating the execution and monitoring of the workflows. Workflow systems provide domain-independent customizable interfaces and tools that combine different tools and technologies along with efficient methods for using them. As simulations and experiments move into the petascale regime, the orchestration of long running data and compute intensive tasks is becoming a major requirement for the successful steering and completion of scientific investigations. A scientific workflow is the process of combining data and processes into a configurable, structured set of steps that implement semi-automated computational solutions of a scientific problem. Kepler is a cross-project collaboration, co-founded by the SciDAC Scientific Data Management (SDM) Center, whose purpose is to develop a domain-independent scientific workflow system. It provides a workflow environment in which scientists design and execute scientific workflows by specifying the desired sequence of computational actions and the appropriate data flow, including required data transformations, between these steps. Currently deployed workflows range from local analytical pipelines to distributed, high-performance and high-throughput applications, which can be both data- and compute-intensive. The scientific workflow approach offers a number of advantages over traditional scripting-based approaches, including ease of configuration, improved reusability and maintenance of workflows and components (called actors), automated provenance management, 'smart' re-running of different versions of workflow instances, on-the-fly updateable parameters, monitoring

Extensional scientific realism vs. intensional scientific realism.

Science.gov (United States)

Park, Seungbae

2016-10-01

Extensional scientific realism is the view that each believable scientific theory is supported by the unique first-order evidence for it and that if we want to believe that it is true, we should rely on its unique first-order evidence. In contrast, intensional scientific realism is the view that all believable scientific theories have a common feature and that we should rely on it to determine whether a theory is believable or not. Fitzpatrick argues that extensional realism is immune, while intensional realism is not, to the pessimistic induction. I reply that if extensional realism overcomes the pessimistic induction at all, that is because it implicitly relies on the theoretical resource of intensional realism. I also argue that extensional realism, by nature, cannot embed a criterion for distinguishing between believable and unbelievable theories. Copyright © 2016 Elsevier Ltd. All rights reserved.

EFFECT SCIENTIFIC INQUIRY TEACHING MODELS AND SCIENTIFIC ATTITUDE TO PHYSICS STUDENT OUTCOMES

Directory of Open Access Journals (Sweden)

Dian Clara Natalia Sihotang

2014-12-01

Full Text Available The objectives of this study were to determine whether: (1 the student’s achievement taught by using Scientific Inquiry Teaching Models is better than that of taught by using Direct Instruction; (2 the student’s achievement who have a high scientific attitude is better than student who have low scientific attitude; and (3 there is interaction between Scientific Inquiry Teaching Models and scientific attitude for the student’s achievement. The results of research are: (1 the student’s achievement given learning through Scientific Inquiry Teaching Models better than Direct Instruction; (2 the student’s achievement who have a high scientific attitude better than student who have low scientific attitude; and (3 there was interaction between Scientific Inquiry Teaching Models and scientific attitude for student’s achievement which this models is better to apply for student who have a high scientific attitude.

QUINUMAC: The key to the future

International Nuclear Information System (INIS)

Kodman, G.P.; Bouse, D.L.; Robbins, E.D.

1985-01-01

Quality in Nuclear Material Accountability Control (QUINUMAC) is an acronym which defines the integration of quality assurance with Nuclear Material (NM) accountability. At Rockwell Hanford Operations (Rockwell), a system which integrates the requirements of ANSI/ASME NQA-1 and DOE Order 5630.2 has been implemented. The Rockwell program is designed to assure procedural compliance in all NM accountability measurements through a system of checks and balances accomplished by the performing organization and the Quality Assurance (QA) and Nuclear Material Control (NMC) organizations

Extended x-ray absorption fine structure study of arsenic in HgCdTe: p-type doping linked to nonsubstitutional As incorporation in an unknown AsHg8 structure

International Nuclear Information System (INIS)

Biquard, X.; Alliot, I.; Ballet, P.

2009-01-01

An extended x-ray absorption fine structure (EXAFS) investigation has been carried out on arsenic-doped Hg 70 Cd 30 Te samples. The incorporation of atomic arsenic has been achieved using a nonconventional radio-frequency plasma source in a molecular beam epitaxy reactor. Two samples from the same epitaxial wafer have been studied. One underwent a 400 deg. C activation annealing under Hg pressure, leading to n to p-type conversion. In the commonly admitted scenario, this conversion is associated with the annealing-induced migration of As from a Hg site to a Te site. This study shows that this is not the case. Before annealing, As is found to be involved in noncrystalline structures: 50% inside an As 2 Te 3 chalcogenide glass and 50% inside a new AsHg 8 compact structure. After annealing, the As 2 Te 3 chalcogenide glass disappears, 31% of As occupies Hg sites and 69% incorporates inside this new AsHg 8 compact structure that occupies Te sites. The EXAFS results are in excellent agreement with 77 K Hall-effect measurements. The new AsHg 8 structure is found to have an acceptor behavior. Overall, this study provides an entirely new vision of extrinsic p-type doping of HgCdTe as well as the first experimental evidence of As site transfer induced by annealing.

Exploration of Korean Students' Scientific Imagination Using the Scientific Imagination Inventory

Science.gov (United States)

Mun, Jiyeong; Mun, Kongju; Kim, Sung-Won

2015-01-01

This article reports on the study of the components of scientific imagination and describes the scales used to measure scientific imagination in Korean elementary and secondary students. In this study, we developed an inventory, which we call the Scientific Imagination Inventory (SII), in order to examine aspects of scientific imagination. We…

Effects of Scaffolds and Scientific Reasoning Ability on Web-Based Scientific Inquiry

Science.gov (United States)

Wu, Hui-Ling; Weng, Hsiao-Lan; She, Hsiao-Ching

2016-01-01

This study examined how background knowledge, scientific reasoning ability, and various scaffolding forms influenced students' science knowledge and scientific inquiry achievements. The students participated in an online scientific inquiry program involving such activities as generating scientific questions and drawing evidence-based conclusions,…

InAs/GaSb type-II superlattice infrared detectors: Future prospect

Science.gov (United States)

Rogalski, A.; Martyniuk, P.; Kopytko, M.

2017-09-01

Investigations of antimonide-based materials began at about the same time as HgCdTe ternary alloys—in the 1950s, and the apparent rapid success of their technology, especially low-dimensional solids, depends on the previous five decades of III-V materials and device research. However, the sophisticated physics associated with the antimonide-based bandgap engineering concept started at the beginning of 1990s gave a new impact and interest in development of infrared detector structures within academic and national laboratories. The development of InAs/GaSb type-II superlattices (T2SLs) results from two primary motivations: the perceived challenges of reproducibly fabricating high-operability HgCdTe focal plane arrays (FPAs) at reasonable cost and the theoretical predictions of lower Auger recombination for type T2SL detectors compared with HgCdTe. Second motivation—lower Auger recombination should be translated into a fundamental advantage for T2SL over HgCdTe in terms of lower dark current and/or higher operating temperature, provided other parameters such as Shockley-Read-Hall (SRH) lifetime are equal. InAs/GaSb T2SL photodetectors offer similar performance to HgCdTe at an equivalent cut-off wavelength, but with a sizeable penalty in operating temperature, due to the inherent difference in SRH lifetimes. It is predicted that since the future infrared (IR) systems will be based on the room temperature operation of depletion-current limited arrays with pixel densities that are fully consistent with background- and diffraction-limited performance due to the system optics, the material system with long SRH lifetime will be required. Since T2SLs are very much resisted in attempts to improve its SRH lifetime, currently the only material that meets this requirement is HgCdTe. Due to less ionic chemical bonding, III-V semiconductors are more robust than their II-VI counterparts. As a result, III-V-based FPAs excel in operability, spatial uniformity, temporal stability

Scientific integrity in Brazil.

Science.gov (United States)

Lins, Liliane; Carvalho, Fernando Martins

2014-09-01

This article focuses on scientific integrity and the identification of predisposing factors to scientific misconduct in Brazil. Brazilian scientific production has increased in the last ten years, but the quality of the articles has decreased. Pressure on researchers and students for increasing scientific production may contribute to scientific misconduct. Cases of misconduct in science have been recently denounced in the country. Brazil has important institutions for controlling ethical and safety aspects of human research, but there is a lack of specific offices to investigate suspected cases of misconduct and policies to deal with scientific dishonesty.

Plutonium dissolution from Rocky Flats Plant incinerator ash

International Nuclear Information System (INIS)

Delegard, C.H.

1985-06-01

Rockwell Hanford Operations (Rockwell) soon will commence recovery of plutonium from Rocky Flats Plant incinerator ash. In preparation for this processing, Rockwell undertook literature and laboratory studies to identify, select and optimize plutonium dissolution methods for treating the ash. Ash reburning, followed by dissolution in nitric acid containing calcium fluoride, was selected as the processing method for the ash. Recommended values of process parameters were identified. Using the selected process, 99.5% plutonium recovery was achieved, leaving about 12.7 wt % heel residue for an equal weight composite of the three ashes tested. 15 refs., 26 figs

The Revista Scientific

Directory of Open Access Journals (Sweden)

Oscar Antonio Martínez Molina

2017-02-01

Full Text Available The Revista Scientific aims to publish quality papers that include the perspective of analysis in educational settings. Together with www.indtec.com.ve, this electronic publication aims to promote and disseminate, with seriousness and rigor, the academic production in this field. Editorial of the new stage Revista Scientific was created with the aim of constituting a reference space for scientific research in the field of research analysis that is carried out within the universities in Latin America, once the distribution list hosted on the INDTEC platform (http://www.indtec.com.ve is consolidated as a space for dissemination and development of new ideas and initiatives. The first presentation of INDTEC Magazine was held in August 2016 in Venezuela. Thanks to the support of the INDTEC platform, SCIENTIFIC Magazine has been able to develop from the cooperative work of the people who make up its Editorial Committee, Academic Committee and Scientific Committee in Electronic Edition, and of the referees of each one of the numbers. Part of the success is due to the motivation of its co-editors and excellent professionals from different parts of the world: Argentina, Belgium, Colombia, Cuba, Ecuador, Spain, Mexico, Venezuela, which form the various committees, with enthusiasm and joy participating in this project (whose organizational structure is presented in this edition and continues in increcendo. Also, the strategy adopted to edit a monographic number from the various events organized in the framework of the universities, has contributed to provide SCIENTIFIC with a point value speaker of intellectual progress in the field of education. SCIENTIFIC Magazine is currently indexed in ISI, International Scientific Indexing, Dubai - UAE; ROAD, the Directory of Open Access Scholarly Resources (ISSN International Center, France; REVENCYT-ULA, Venezuela; Google Scholar (Google Scholar, International Index; Published in Calaméo; ISSUU; Academia

Airborne measurements of CO2 column concentrations made with a pulsed IPDA lidar using a multiple-wavelength-locked laser and HgCdTe APD detector

Science.gov (United States)

Abshire, James B.; Ramanathan, Anand K.; Riris, Haris; Allan, Graham R.; Sun, Xiaoli; Hasselbrack, William E.; Mao, Jianping; Wu, Stewart; Chen, Jeffrey; Numata, Kenji; Kawa, Stephan R.; Yang, Mei Ying Melissa; DiGangi, Joshua

2018-04-01

Here we report on measurements made with an improved CO2 Sounder lidar during the ASCENDS 2014 and 2016 airborne campaigns. The changes made to the 2011 version of the lidar included incorporating a rapidly wavelength-tunable, step-locked seed laser in the transmitter, using a much more sensitive HgCdTe APD detector and using an analog digitizer with faster readout time in the receiver. We also improved the lidar's calibration approach and the XCO2 retrieval algorithm. The 2014 and 2016 flights were made over several types of topographic surfaces from 3 to 12 km aircraft altitudes in the continental US. The results are compared to the XCO2 values computed from an airborne in situ sensor during spiral-down maneuvers. The 2014 results show significantly better performance and include measurement of horizontal gradients in XCO2 made over the Midwestern US that agree with chemistry transport models. The results from the 2016 airborne lidar retrievals show precisions of ˜ 0.7 parts per million (ppm) with 1 s averaging over desert surfaces, which is an improvement of about 8 times compared to similar measurements made in 2011. Measurements in 2016 were also made over fresh snow surfaces that have lower surface reflectance at the laser wavelengths. The results from both campaigns showed that the mean values of XCO2 retrieved from the lidar consistently agreed with those based on the in situ sensor to within 1 ppm. The improved precision and accuracy demonstrated in the 2014 and 2016 flights should benefit future airborne science campaigns and advance the technique's readiness for a space-based instrument.

The Scientific Competitiveness of Nations.

Science.gov (United States)

Cimini, Giulio; Gabrielli, Andrea; Sylos Labini, Francesco

2014-01-01

We use citation data of scientific articles produced by individual nations in different scientific domains to determine the structure and efficiency of national research systems. We characterize the scientific fitness of each nation-that is, the competitiveness of its research system-and the complexity of each scientific domain by means of a non-linear iterative algorithm able to assess quantitatively the advantage of scientific diversification. We find that technological leading nations, beyond having the largest production of scientific papers and the largest number of citations, do not specialize in a few scientific domains. Rather, they diversify as much as possible their research system. On the other side, less developed nations are competitive only in scientific domains where also many other nations are present. Diversification thus represents the key element that correlates with scientific and technological competitiveness. A remarkable implication of this structure of the scientific competition is that the scientific domains playing the role of "markers" of national scientific competitiveness are those not necessarily of high technological requirements, but rather addressing the most "sophisticated" needs of the society.

Scientific Utopia: An agenda for improving scientific communication (Invited)

Science.gov (United States)

Nosek, B.

2013-12-01

The scientist's primary incentive is publication. In the present culture, open practices do not increase chances of publication, and they often require additional work. Practicing the abstract scientific values of openness and reproducibility thus requires behaviors in addition to those relevant for the primary, concrete rewards. When in conflict, concrete rewards are likely to dominate over abstract ones. As a consequence, the reward structure for scientists does not encourage openness and reproducibility. This can be changed by nudging incentives to align scientific practices with scientific values. Science will benefit by creating and connecting technologies that nudge incentives while supporting and improving the scientific workflow. For example, it should be as easy to search the research literature for my topic as it is to search the Internet to find hilarious videos of cats falling off of furniture. I will introduce the Center for Open Science (http://centerforopenscience.org/) and efforts to improve openness and reproducibility such as http://openscienceframework.org/. There will be no cats.

Analyzing Data Citations to Assess the Scientific and Societal Value of Scientific Data

Science.gov (United States)

Chen, R. S.; Downs, R. R.

2012-12-01

Stakeholders in the creation, distribution, support, funding, and use of scientific data can benefit by understanding the value that the data have for society and science. For decades, the scientific community has been using citations of articles in the published scientific literature as one of the primary measures used for evaluating the performance of scientists, departments, institutions, and scientific disciplines. Similarly, citations in the published literature of scientific data may be useful for measuring and assessing the value of the scientific data and the performance of the individuals, projects, programs, and organizations that have contributed to the data and their use. The results of citation analysis and other assessments of the value of data also can contribute to planning for future data collection, development, distribution, and preservation efforts. The planned release of new data citation indexes and the more widespread adoption of unique data identifiers and automated attribution mechanisms have the potential to improve significantly the capabilities for analyzing citations of scientific data. In addition, rapid developments in the systems and capabilities for disseminating data, along with education and workforce development on the importance of data attribution and on techniques for data citation, can improve practices for citing scientific data. Such practices need to lead not only to better aggregate statistics about data citation, but also to improved characterization and understanding of the impact of data use in terms of the benefits for science and society. Analyses of citations in the scientific literature were conducted for data that were distributed by an interdisciplinary scientific data center during a five-year period (1997 - 2011), to identify the scientific fields represented by the journals and books in which the data were cited. Secondary citation analysis also was conducted for a sample of scientific publications that used

INTEGRATION OF UKRAINIAN INDUSTRY SCIENTIFIC PERIODACLS INTO WORLD SCIENTIFIC INFORMATION SPACE: PROBLEMS AND SOLUTIONS

Directory of Open Access Journals (Sweden)

T. O. Kolesnykova

2013-11-01

Full Text Available Purpose. Problem of representation lack of scientists’ publications, including transport scientists, in the international scientometric databases is the urgent one for Ukrainian science. To solve the problem one should study the structure and quality of the information flow of scientific periodicals of railway universities in Ukraine and to determine the integration algorithm of scientific publications of Ukrainian scientists into the world scientific information space. Methodology. Applying the methods of scientific analysis, synthesis, analogy, comparison and prediction the author has investigated the problem of scientific knowledge distribution using formal communications. The readiness of Ukrainian railway periodicals to registration procedure in the international scientometric systems was analyzed. The level of representation of articles and authors of Ukrainian railway universities in scientometric database Scopus was studied. Findings. Monitoring of the portals of railway industry universities of Ukraine and the sites of their scientific periodicals and analysis of obtained data prove insufficient readiness of most scientific publications for submission to scientometric database. The ways providing sufficient "visibility" of industry periodicals of Ukrainian universities in the global scientific information space were proposed. Originality. The structure and quality of documentary flow of scientific periodicals in railway transport universities of Ukraine and its reflection in scientometric DB Scopus were first investigated. The basic directions of university activities to integrate the results of transport scientists research into the global scientific digital environment were outlined. It was determined the leading role of university libraries in the integration processes of scientific documentary resources of universities into the global scientific and information communicative space. Practical value. Implementation of the proposed

A Complexity Approach to Evaluating National Scientific Systems through International Scientific Collaborations

Science.gov (United States)

Zelnio, Ryan J.

2013-01-01

This dissertation seeks to contribute to a fuller understanding of how international scientific collaboration has affected national scientific systems. It does this by developing three methodological approaches grounded in social complexity theory and applying them to the evaluation of national scientific systems. The first methodology identifies…

[Financing of the scientific publication and protection of the scientific knowledge].

Science.gov (United States)

Oliveira Filho, Renato Santos de; Hochman, Bernardo; Nahas, Fabio Xerfan; Ferreira, Lydia Masako

2005-01-01

The main purpose of a study is its publication on a scientific journal. Research financing agencies are important institutions so that studies can be developed and published. The most important research financing agencies that are discussed in this article are: "Coordenação de Aperfeiçoamento de Pessoal de Nível Superior" (CAPES), "Conselho Nacional de Desenvolvimento Científico e Tecnológico" (CNPq) and "Fundação de Amparo à Pesquisa do Estado de São Paulo" (FAPESP). CAPES' activities can be grouped in four different strategy lines: a) it evaluates the stricto sensu, at the post-graduation level; b) it provides access and development of scientific research; c) it provides investment on the development of high qualified human resources in Brazil and abroad, and d) it promotes international scientific cooperation. Although CAPES does not support directly scientific publications, almost all actions of this agency contribute to the development of scientific research and publication. CNPq has two main purposes: financing researches and development of human resources. It provides the researchers with financial aid to scientific publication. The grants for editing were specifically created for supporting the national scientific and technical publications edited by Brazilians institutions or societies. CNPq can also support Congresses, Symposiums and similar short-term courses. The Plataforma Lattes is also a branch of CNPq on which the Curriculum Lattes is available. This site has the curriculum vitae of the scientific community and is of great value for researchers. FAPESP also finances journal publications, articles and books that bring up original results of studies made by researchers from the state of São Paulo. It finances, partially, the travel expenses of innovative papers authors in meetings within the country or abroad. Brazilian authors are increasing the number of international publications. Universities, research institutes, financing agencies and

On the Possibility of a Scientific Theory of Scientific Method.

Science.gov (United States)

Nola, Robert

1999-01-01

Discusses the philosophical strengths and weaknesses of Laudan's normative naturalism, which understands the principles of scientific method to be akin to scientific hypotheses, and therefore open to test like any principle of science. Contains 19 references. (Author/WRM)

Expectations for a scientific collaboratory

DEFF Research Database (Denmark)

Sonnenwald, Diane H.

2003-01-01

In the past decade, a number of scientific collaboratories have emerged, yet adoption of scientific collaboratories remains limited. Meeting expectations is one factor that influences adoption of innovations, including scientific collaboratories. This paper investigates expectations scientists have...... with respect to scientific collaboratories. Interviews were conducted with 17 scientists who work in a variety of settings and have a range of experience conducting and managing scientific research. Results indicate that scientists expect a collaboratory to: support their strategic plans; facilitate management...... of the scientific process; have a positive or neutral impact on scientific outcomes; provide advantages and disadvantages for scientific task execution; and provide personal conveniences when collaborating across distances. These results both confirm existing knowledge and raise new issues for the design...

The paradox of scientific expertise

DEFF Research Database (Denmark)

Alrøe, Hugo Fjelsted; Noe, Egon

2011-01-01

Modern societies depend on a growing production of scientific knowledge, which is based on the functional differentiation of science into still more specialised scientific disciplines and subdisciplines. This is the basis for the paradox of scientific expertise: The growth of science leads to a f...... cross-disciplinary research and in the collective use of different kinds of scientific expertise, and thereby make society better able to solve complex, real-world problems.......Modern societies depend on a growing production of scientific knowledge, which is based on the functional differentiation of science into still more specialised scientific disciplines and subdisciplines. This is the basis for the paradox of scientific expertise: The growth of science leads...... to a fragmentation of scientific expertise. To resolve this paradox, the present paper investigates three hypotheses: 1) All scientific knowledge is perspectival. 2) The perspectival structure of science leads to specific forms of knowledge asymmetries. 3) Such perspectival knowledge asymmetries must be handled...

Source and special nuclear material sealing and labeling requirements

International Nuclear Information System (INIS)

Jordan, K.N.

1978-04-01

Purpose of this document is to define requirements for the use of tamper-indicating seals and identifying labels on SS Material containers at Rockwell Hanford Operations. The requirements defined in this document are applicable to all Rockwell Hanford Operation employees involved in handling, processing, packaging, transferring, shipping, receiving or storing SS Material

Open scientific communication urged

Science.gov (United States)

Richman, Barbara T.

In a report released last week the National Academy of Sciences' Panel on Scientific Communication and National Security concluded that the ‘limited and uncertain benefits’ of controls on the dissemination of scientific and technological research are ‘outweighed by the importance of scientific progress, which open communication accelerates, to the overall welfare of the nation.’ The 18-member panel, chaired by Dale R. Corson, president emeritus of Cornell University, was created last spring (Eos, April 20, 1982, p. 241) to examine the delicate balance between open dissemination of scientific and technical information and the U.S. government's desire to protect scientific and technological achievements from being translated into military advantages for our political adversaries.The panel dealt almost exclusively with the relationship between the United States and the Soviet Union but noted that there are ‘clear problems in scientific communication and national security involving Third World countries.’ Further study of this matter is necessary.

Undergraduate honors students' images of science: Nature of scientific work and scientific knowledge

Science.gov (United States)

Wallace, Michael L.

This exploratory study assessed the influence of an implicit, inquiry-oriented nature of science (NOS) instructional approach undertaken in an interdisciplinary college science course on undergraduate honor students' (UHS) understanding of the aspects of NOS for scientific work and scientific knowledge. In this study, the nature of scientific work concentrated upon the delineation of science from pseudoscience and the value scientists place on reproducibility. The nature of scientific knowledge concentrated upon how UHS view scientific theories and how they believe scientists utilize scientific theories in their research. The 39 UHS who participated in the study were non-science majors enrolled in a Honors College sponsored interdisciplinary science course where the instructors took an implicit NOS instructional approach. An open-ended assessment instrument, the UFO Scenario, was designed for the course and used to assess UHS' images of science at the beginning and end of the semester. The mixed-design study employed both qualitative and quantitative techniques to analyze the open-ended responses. The qualitative techniques of open and axial coding were utilized to find recurring themes within UHS' responses. McNemar's chi-square test for two dependent samples was used to identify whether any statistically significant changes occurred within responses from the beginning to the end of the semester. At the start of the study, the majority of UHS held mixed NOS views, but were able to accurately define what a scientific theory is and explicate how scientists utilize theories within scientific research. Postinstruction assessment indicated that UHS did not make significant gains in their understanding of the nature of scientific work or scientific knowledge and their overall images of science remained static. The results of the present study found implicit NOS instruction even with an extensive inquiry-oriented component was an ineffective approach for modifying UHS

Measurements of Low Frequency Noise of Infrared Photo-Detectors with Transimpedance Detection System

Directory of Open Access Journals (Sweden)

Ciura Łukasz

2014-08-01

Full Text Available The paper presents the method and results of low-frequency noise measurements of modern mid-wavelength infrared photodetectors. A type-II InAs/GaSb superlattice based detector with nBn barrier architecture is compared with a high operating temperature (HOT heterojunction HgCdTe detector. All experiments were made in the range 1 Hz - 10 kHz at various temperatures by using a transimpedance detection system, which is examined in detail. The power spectral density of the nBn’s dark current noise includes Lorentzians with different time constants while the HgCdTe photodiode has more uniform 1/f - shaped spectra. For small bias, the low-frequency noise power spectra of both devices were found to scale linearly with bias voltage squared and were connected with the fluctuations of the leakage resistance. Leakage resistance noise defines the lower noise limit of a photodetector. Other dark current components give raise to the increase of low-frequency noise above this limit. For the same voltage biasing devices, the absolute noise power densities at 1 Hz in nBn are 1 to 2 orders of magnitude lower than in a MCT HgCdTe detector. In spite of this, low-frequency performance of the HgCdTe detector at ~ 230K is still better than that of InAs/GaSb superlattice nBn detector.

WWW: The Scientific Method

Science.gov (United States)

Blystone, Robert V.; Blodgett, Kevin

2006-01-01

The scientific method is the principal methodology by which biological knowledge is gained and disseminated. As fundamental as the scientific method may be, its historical development is poorly understood, its definition is variable, and its deployment is uneven. Scientific progress may occur without the strictures imposed by the formal…

The Scientific Enterprise

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 13; Issue 9. The Scientific Enterprise - Assumptions, Problems, and Goals in the Modern Scientific Framework. V V Raman. Reflections Volume 13 Issue 9 September 2008 pp 885-894 ...

Evolution of the scientific paper

Energy Technology Data Exchange (ETDEWEB)

Harmon, J.E.

1992-09-01

The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper`s development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965-?).

Evolution of the scientific paper

Energy Technology Data Exchange (ETDEWEB)

Harmon, J.E.

1992-01-01

The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper's development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965- ).

Turning Scientific Presentations into Stories

Science.gov (United States)

Aruffo, Christopher

2015-01-01

To increase students' confidence in giving scientific presentations, students were shown how to present scientific findings as a narrative story. Students who were preparing to give a scientific talk attended a workshop in which they were encouraged to experience the similarities between telling a personal anecdote and presenting scientific data.…

Software support for students engaging in scientific activity and scientific controversy

Science.gov (United States)

Cavalli-Sforza, Violetta; Weiner, Arlene W.; Lesgold, Alan M.

Computer environments could support students in engaging in cognitive activities that are essential to scientific practice and to the understanding of the nature of scientific knowledge, but that are difficult to manage in science classrooms. The authors describe a design for a computer-based environment to assist students in conducting dialectical activities of constructing, comparing, and evaluating arguments for competing scientific theories. Their choice of activities and their design respond to educators' and theorists' criticisms of current science curricula. They give detailed specifications of portions of the environment.

Scientific Research Competencies of Prospective Teachers and their Attitu des toward Scientific Research

Directory of Open Access Journals (Sweden)

Hasan Hüseyin Şahan

2015-09-01

Full Text Available Present study has been constructed to determine scientific research competencies of prospective teachers and identify the extent of effect of prospective teachers’ attitudes toward scientific research and scientific research methods course on their research skills and attitudes towards research. This study has two dimensions: it is a descriptive study by virtue of identifying prospective teachers’ research skills and attitudes toward research, also an experimental study by virtue of determining the effect of scientificresearch methods course on prospective teachers’ skills and their attitudes toward research. In order to obtain the data related to identified sub-problems “Scale for Identifying Scientific Research Competencies” and “Scale for Identifying the Attitude toward Research” have been utilized. Data collection tools were applied to 445 prospective teachers. It has thus been concluded in this study that scientific research methods course had no significant effect in gaining scientific research competencies to prospective teachers and that this effect demonstrated no differentiation with respect to departments. On the other hand it has been explored that scientific research methods course had a negative effect onthe attitudes of prospective teachers toward research and that there was a differentiation to the disadvantage of prospective teachers studying at Primary Education Mathematics Teaching Department.

Designing scientific applications on GPUs

CERN Document Server

Couturier, Raphael

2013-01-01

Many of today's complex scientific applications now require a vast amount of computational power. General purpose graphics processing units (GPGPUs) enable researchers in a variety of fields to benefit from the computational power of all the cores available inside graphics cards.Understand the Benefits of Using GPUs for Many Scientific ApplicationsDesigning Scientific Applications on GPUs shows you how to use GPUs for applications in diverse scientific fields, from physics and mathematics to computer science. The book explains the methods necessary for designing or porting your scientific appl

ERINDA Scientific Results: Transnational Access Activities and Scientific Visits

CERN Document Server

Hambsch, Franz-Josef

2014-01-01

This paper gives an overview of the Transnational Access Activities and Scientific visits within the FP7 project ERINDA (European Research Infrastructures for Nuclear Data). It highlights the fact that nearly 3200 data - taking hours for external users were made available in the partner installations and 104 man weeks for scientific visits to par tner institutes. This is much more than the 2500 beam hours and 80 weeks promised in the Description of Work of the project.

The Uncertain of Scientific Process

Directory of Open Access Journals (Sweden)

Jovina dÁvila Bordoni

2016-10-01

Full Text Available The study assesses the existence of certainty in the scientific process, it seeks the truth, however, faced with the unknown, causes uncertainties and doubts. We used the bibliographical research, in which it systematized the scientific literature on epistemology and knowledge related to the scientific process and the uncertainties that surround him. The scientific process, though continuously seeks the truth, will not attain perfection, because the researcher deals with the unknown. The science seeks constantly new knowledge and progress with the criticism of the mistakes, seeks the truth, however these are provisional. It is concluded that all scientific knowledge is uncertain.

Scientific collaboratories in higher education

DEFF Research Database (Denmark)

Sonnenwald, Diane H.; Li, Bin

2003-01-01

Scientific collaboratories hold the promise of providing students access to specialized scientific instruments, data and experts, enabling learning opportunities perhaps otherwise not available. However, evaluation of scientific collaboratories in higher education has lagged behind...

Power plant system assessment. Final report. SP-100 Program

International Nuclear Information System (INIS)

Anderson, R.V.; Atkins, D.F.; Bost, D.S.

1983-01-01

The purpose of this assessment was to provide system-level insights into 100-kWe-class space reactor electric systems. Using these insights, Rockwell was to select and perform conceptual design studies on a ''most attractive'' system that met the preliminary design goals and requirements of the SP-100 Program. About 4 of the 6 months were used in the selection process. The remaining 2 months were used for the system conceptual design studies. Rockwell completed these studies at the end of FY 1983. This report summarizes the results of the power plant system assessment and describes our choice for the most attractive system - the Rockwell SR-100G System (Space Reactor, 100 kWe, Growth) - a lithium-cooled UN-fueled fast reactor/Brayton turboelectric converter system

Implicit normativity in scientific advice

DEFF Research Database (Denmark)

Folker, Anna Paldam; Andersen, Hanne; Sandøe, Peter

2008-01-01

This paper focuses on implicit normative considerations underlying scientific advice-those normative questions, decisions, or issues that scientific advisers and the general public are not fully aware of but that nevertheless have implications for the character of the advice given. Using...... nutritional science as an example, we identify three such implicit normative issues. The first concerns the aim of scientific advice: whether it is about avoiding harm or promoting good. The second concerns the intended beneficiaries of the advice: whether advice should be framed to benefit the society...... as a whole or with special concern for the most vulnerable members of the population. The third consideration involves scientific advisers' attempts to balance the strengths of the scientific evidence with the expected consequences of scientific advice. We hope to promote more explicit discussion...

Taylor’s Scientific Management

Directory of Open Access Journals (Sweden)

Dimitrios Koumparoulis

2012-08-01

Full Text Available Frederick Taylor is known as the father of modern management. Taylor’s scientific management revolutionized industry and helped shape modern organization. Scientific management revolutionized industry because it explains how to increase production by working smarter, not harder. Taylor’s ideas were not limited to only serving the company’s bottom line but the increase in productivity benefited the workforce as well. The principles of scientific management became a machine of universal efficiency since there was a widespread use of scientific management worldwide and beyond the scope of the workplace. Taylor’s theories on using science and statistical fact have become a guideline that many have followed to great success.

Mapping the research on scientific collaboration

Institute of Scientific and Technical Information of China (English)

HOU Jianhua; CHEN Chaomei; YAN Jianxin

2010-01-01

The aim of this paper was to identify the trends and hot topics in the study of scientific collaboration via scientometric analysis.Information visualization and knowledge domain visualization techniques were adopted to determine how the study of scientific collaboration has evolved.A total of 1,455 articles on scientific cooperation published between 1993 and 2007 were retrieved from the SCI,SSCI and A&HCI databases with a topic search of scientific collaboration or scientific cooperation for the analysis.By using CiteSpace,the knowledge bases,research foci,and research fronts in the field of scientific collaboration were studied.The results indicated that research fronts and research foci are highly consistent in terms of the concept,origin,measurement,and theory of scientific collaboration.It also revealed that research fronts included scientific collaboration networks,international scientific collaboration,social network analysis and techniques,and applications of bibliometrical indicators,webmetrics,and health care related areas.

Autonomy vs. dependency of scientific collaboration in scientific performance

Energy Technology Data Exchange (ETDEWEB)

Chinchilla-Rodriguez, Z.; Miguel, S.; Perianes-Rodriguez, A.; Ovalle-Perandones, M.A.; Olmeda-Gomez, C.

2016-07-01

This article explores the capacity of Latin America in the generation of scientific knowledge and its visibility at the global level. The novelty of the contribution lies in the decomposition of leadership, plus its combination with the results of performance indicators. We compare the normalized citation of all output against the leading output, as well as scientific excellence (Chinchilla, et al. 2016a; 2016b), technological impact and the trends in collaboration types and normalized citation. The main goal is to determine to what extent the main Latin American producers of scientific output depend on collaboration to heighten research performance in terms of citation; or to the contrary, whether there is enough autonomy and capacity to leverage its competitiveness through the design of research and development agendas. To the best of our knowledge this is the first study adopting this approach at the country level within the field of N&N. (Author)

Making Sense of Scientific Biographies: Scientific Achievement, Nature of Science, and Storylines in College Students' Essays

Science.gov (United States)

Hwang, Seyoung

2015-01-01

In this article, the educative value of scientific biographies will be explored, especially for non-science major college students. During the "Scientist's life and thought" course, 66 college students read nine scientific biographies including five biologists, covering the canonical scientific achievements in Western scientific history.…

TAYLOR’S SCIENTIFIC MANAGEMENT

OpenAIRE

Dimitrios N. KOUMPAROULIS; Dionysios K. SOLOMOS

2012-01-01

Frederick Taylor is known as the father of modern management. Taylor’s scientific management revolutionized industry and helped shape the modern organization. Scientific management revolutionized industry because it explains how to increase production by working smarter, not harder. Taylor’s ideas were not limited to only serving the company’s bottom line but from the increase in productivity benefited the workforce as well. The principles of scientific management have become a machine of uni...

The Scientific Method and Scientific Inquiry: Tensions in Teaching and Learning

Science.gov (United States)

Tang, Xiaowei; Coffey, Janet E.; Elby, Andy; Levin, Daniel M.

2010-01-01

Typically, the scientific method in science classrooms takes the form of discrete, ordered steps meant to guide students' inquiry. In this paper, we examine how focusing on the scientific method as discrete steps affects students' inquiry and teachers' perceptions thereof. To do so, we study a ninth-grade environmental science class in which…

Scientific Notation Watercolor

Science.gov (United States)

Linford, Kyle; Oltman, Kathleen; Daisey, Peggy

2016-01-01

(Purpose) The purpose of this paper is to describe visual literacy, an adapted version of Visual Thinking Strategy (VTS), and an art-integrated middle school mathematics lesson about scientific notation. The intent of this lesson was to provide students with a real life use of scientific notation and exponents, and to motivate them to apply their…

Plagiarism in scientific publishing.

Science.gov (United States)

Masic, Izet

2012-12-01

Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader's own scientific contribution. There is no general regulation of control of

Tiger Team Assessment, Energy Technology Engineering Center

International Nuclear Information System (INIS)

1991-04-01

The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies

Tiger Team Assessment, Energy Technology Engineering Center

Energy Technology Data Exchange (ETDEWEB)

1991-04-01

The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

STS-26 Discovery, Orbiter Vehicle (OV) 103, OMS pod leak repair at KSC

Science.gov (United States)

1988-01-01

At the Kennedy Space Center (KSC), Rockwell manufacturing engineering specialist Claude Willis (left) and Rockwell manufacturing supervisor George Gallagher begin installation of a 'clamshell' device in the left orbital maneuvering system (OMS) pod reaction control system (RCS) of Discovery, Orbiter Vehicle (OV) 103. Gallagher performed the OMS pod nitric acid oxidizer leak repair operation using the two newly cut access ports in the Orbiter's aft bulkhead.

Communication about scientific uncertainty in environmental nanoparticle research - a comparison of scientific literature and mass media

Science.gov (United States)

Heidmann, Ilona; Milde, Jutta

2014-05-01

The research about the fate and behavior of engineered nanoparticles in the environment is despite its wide applications still in the early stages. 'There is a high level of scientific uncertainty in nanoparticle research' is often stated in the scientific community. Knowledge about these uncertainties might be of interest to other scientists, experts and laymen. But how could these uncertainties be characterized and are they communicated within the scientific literature and the mass media? To answer these questions, the current state of scientific knowledge about scientific uncertainty through the example of environmental nanoparticle research was characterized and the communication of these uncertainties within the scientific literature is compared with its media coverage in the field of nanotechnologies. The scientific uncertainty within the field of environmental fate of nanoparticles is by method uncertainties and a general lack of data concerning the fate and effects of nanoparticles and their mechanisms in the environment, and by the uncertain transferability of results to the environmental system. In the scientific literature, scientific uncertainties, their sources, and consequences are mentioned with different foci and to a different extent. As expected, the authors in research papers focus on the certainty of specific results within their specific research question, whereas in review papers, the uncertainties due to a general lack of data are emphasized and the sources and consequences are discussed in a broader environmental context. In the mass media, nanotechnology is often framed as rather certain and positive aspects and benefits are emphasized. Although reporting about a new technology, only in one-third of the reports scientific uncertainties are mentioned. Scientific uncertainties are most often mentioned together with risk and they arise primarily from unknown harmful effects to human health. Environmental issues itself are seldom mentioned

The (Surplus) Value of Scientific Communication

OpenAIRE

Fröhlich, Gerhard

1996-01-01

In research on scientific communication there are above all theory-less and formal/natural scientific models of scientific communication. These are juxtaposed to social-scientific, power-sensitive models (Elias, Bourdieu, Merton). The (surplus) value of scientific communication can be variously understood: either as inherent surplus values in the sense of potential effects of stimulation, synergy, critique, quality control; or as symbolic surplus value in the sense of symbolic capital (Bourdi...

Should scientific realists be platonists?

DEFF Research Database (Denmark)

Busch, Jacob; Morrison, Joe

2015-01-01

an appropriate use of the resources of Scientific Realism (in particular, IBE) to achieve platonism? (§2) We argue that just because a variety of different inferential strategies can be employed by Scientific Realists does not mean that ontological conclusions concerning which things we should be Scientific...

[Scientific journalism and epidemiological risk].

Science.gov (United States)

Luiz, Olinda do Carmo

2007-01-01

The importance of the communications media in the construction of symbols has been widely acknowledged. Many of the articles on health published in the daily newspapers mention medical studies, sourced from scientific publications focusing on new risks. The disclosure of risk studies in the mass media is also a topic for editorials and articles in scientific journals, focusing the problem of distortions and the appearance of contradictory news items. The purpose of this paper is to explore the meaning and content of disclosing scientific risk studies in large-circulation daily newspapers, analyzing news items published in Brazil and the scientific publications used as their sources during 2000. The "risk" is presented in the scientific research projects as a "black box" in the meaning of Latour, with the news items downplaying scientific disputes and underscoring associations between behavioral habits and the occurrence of diseases, emphasizing individual aspects of the epidemiological approach, to the detriment of the group.

PLAGIARISM IN SCIENTIFIC PUBLISHING

Science.gov (United States)

Masic, Izet

2012-01-01

Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader’s own scientific contribution. There is no general regulation of control of

50 CFR 35.11 - Scientific uses.

Science.gov (United States)

2010-10-01

... NATIONAL WILDLIFE REFUGE SYSTEM WILDERNESS PRESERVATION AND MANAGEMENT General Rules § 35.11 Scientific uses. Recognizing the scientific value of wilderness, research data gathering and similar scientific... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Scientific uses. 35.11 Section 35.11...

Transactions of the Zimbabwe Scientific Association

African Journals Online (AJOL)

The Zimbabwe Scientific Association was founded in Bulawayo in 1899 (called the Rhodesia Scientific Assocation at the time) to promote the study and advancement of science in Zimbabwe and to facilitate the acquisition and dissemination of scientific knowledge. Its journal, Transactions of the Zimbabwe Scientific ...

Quantifying the Ease of Scientific Discovery.

Science.gov (United States)

Arbesman, Samuel

2011-02-01

It has long been known that scientific output proceeds on an exponential increase, or more properly, a logistic growth curve. The interplay between effort and discovery is clear, and the nature of the functional form has been thought to be due to many changes in the scientific process over time. Here I show a quantitative method for examining the ease of scientific progress, another necessary component in understanding scientific discovery. Using examples from three different scientific disciplines - mammalian species, chemical elements, and minor planets - I find the ease of discovery to conform to an exponential decay. In addition, I show how the pace of scientific discovery can be best understood as the outcome of both scientific output and ease of discovery. A quantitative study of the ease of scientific discovery in the aggregate, such as done here, has the potential to provide a great deal of insight into both the nature of future discoveries and the technical processes behind discoveries in science.

Promoting Science Learning and Scientific Identification through Contemporary Scientific Investigations

Science.gov (United States)

Van Horne, Katie

This dissertation investigates the implementation issues and the educational opportunities associated with "taking the practice turn" in science education. This pedagogical shift focuses instructional experiences on engaging students in the epistemic practices of science both to learn the core ideas of the disciplines, as well as to gain an understanding of and personal connection to the scientific enterprise. In Chapter 2, I examine the teacher-researcher co-design collaboration that supported the classroom implementation of a year-long, project-based biology curriculum that was under development. This study explores the dilemmas that arose when teachers implemented a new intervention and how the dilemmas arose and were managed throughout the collaboration of researchers and teachers and between the teachers. In the design-based research of Chapter 3, I demonstrate how students' engagement in epistemic practices in contemporary science investigations supported their conceptual development about genetics. The analysis shows how this involved a complex interaction between the scientific, school and community practices in students' lives and how through varied participation in the practices students come to write about and recognize how contemporary investigations can give them leverage for science-based action outside of the school setting. Finally, Chapter 4 explores the characteristics of learning environments for supporting the development of scientific practice-linked identities. Specific features of the learning environment---access to the intellectual work of the domain, authentic roles and accountability, space to make meaningful contributions in relation to personal interests, and practice-linked identity resources that arose from interactions in the learning setting---supported learners in stabilizing practice-linked science identities through their engagement in contemporary scientific practices. This set of studies shows that providing students with the

50 CFR 600.512 - Scientific research.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Scientific research. 600.512 Section 600... research. (a) Scientific research activity. Persons planning to conduct scientific research activities on board a scientific research vessel in the EEZ that may be confused with fishing are encouraged to submit...

The craft of scientific writing

CERN Document Server

Alley, Michael

2019-01-01

The Craft of Scientific Writing uses scores of examples to show the differences between scientific writing that informs and persuades and scientific writing that does not. Focusing on technical papers, dissertations, and reports, this text shows engineers, scientists, and technical professionals the five keys of style that distinguish the best scientific documents: (1) having the details presented in a methodical fashion, (2) having the important details emphasized, (3) having ideas cast into clear and precise sentences, (4) having clear connections between those ideas, and (5) having illustrations that persuade.

ON THE APPROACH TO SCIENTIFIC PUBLICATIONS VISIBILITY MAXIMIZATION BY THE SCIENTIFIC SOCIAL NETWORKS USAGE

Directory of Open Access Journals (Sweden)

A. V. Semenets

2015-12-01

3 Research results. Data integration of the user profiles of the scientific social networksThe maximization of visibility and bibliometrics citation increasing of the scientific papers initiated by the given above approach is discussed. The detailed strategy of the user profiles bibliometrics data integration through the scientific social networks is proposed. The role and ways to receiving of the Altmetric rating indices are mentioned.

Lakatos' Scientific Research Programmes as a Framework for Analysing Informal Argumentation about Socio-Scientific Issues

Science.gov (United States)

Chang, Shu-Nu; Chiu, Mei-Hung

2008-01-01

The purpose of this study is to explore how Lakatos' scientific research programmes might serve as a theoretical framework for representing and evaluating informal argumentation about socio-scientific issues. Seventy undergraduate science and non-science majors were asked to make written arguments about four socio-scientific issues. Our analysis…

Performance of Hg1-xCdxTe infrared focal plane array at elevated temperature

Science.gov (United States)

Singh, Anand; Pal, Ravinder

2017-04-01

The simulated optical and electrical performance of the infrared HgCdTe focal plane array (FPA) for elevated operation temperature is reported. The depleted absorber layer is explored for equilibrium mode of operation up to 160 K. A resonant cavity is created to improve photon-matter interaction and hence, reduces the required absorption volume. The volume of the active region of HgCdTe detector is reduced by 70% in this manner. Dark current density is decreased without compromising the quantum efficiency. The effect of the reduced band filling effect leading to higher absorption coefficient and more efficient utilization of incident flux is employed. High quantum efficiency is achieved in a thin compositionally graded n+/ν/π/p HgCdTe photo-diode. This architecture helps to minimize the requirement of charge handling capacity in the CMOS read-out integrated circuit (ROIC) as the operation temperature is increased. Quantum efficiency ˜30% or above is shown to be sufficient for Noise Equivalent Temperature Difference (NETD) less than 20 mK with the reported design.

Insight on quantum dot infrared photodetectors

International Nuclear Information System (INIS)

Rogalski, A

2009-01-01

The paper presents possible future developments of quantum dot infrared photodetectors (QDIPs). At the beginning the fundamental properties of QDIPs are summarized. Next, investigations of the performance of QDIPs, as compared to other types of infrared photodetectors, are presented. Theoretical predictions indicate that only type II superlattice photodiodes and QDIPs are expected to compete with HgCdTe photodiodes. QDIPs theoretically have several advantages compared with QWIPs including the normal incidence response, lower dark current, higher operating temperature, higher responsivity and detectivity. The operating temperature for HgCdTe detectors is higher than for other types of photon detectors. Comparison of QDIP performance with HgCdTe detectors gives evidence that the QDIP is suitable for high operation temperature. It can be expected that an improvement in technology and design of QDIP detectors will make it possible to achieve both high sensitivity and fast response useful for practical application at room temperature focal plane arrays. However, so far the QDIP devices have not fully demonstrated their potential advantages.

Scientific Ethics: A New Approach.

Science.gov (United States)

Menapace, Marcello

2018-06-04

Science is an activity of the human intellect and as such has ethical implications that should be reviewed and taken into account. Although science and ethics have conventionally been considered different, it is herewith proposed that they are essentially similar. The proposal set henceforth is to create a new ethics rooted in science: scientific ethics. Science has firm axiological foundations and searches for truth (as a value, axiology) and knowledge (epistemology). Hence, science cannot be value neutral. Looking at standard scientific principles, it is possible to construct a scientific ethic (that is, an ethical framework based on scientific methods and rules), which can be applied to all sciences. These intellectual standards include the search for truth (honesty and its derivatives), human dignity (and by reflection the dignity of all animals) and respect for life. Through these it is thence achievable to draft a foundation of a ethics based purely on science and applicable beyond the confines of science. A few applications of these will be presented. Scientific ethics can have vast applications in other fields even in non scientific ones.

Rediscovering the scientific ethos

DEFF Research Database (Denmark)

Djørup, Stine

The doctoral dissertation discusses some of the moral standards of good scientific practice that areunderexposed in the literature. In particular, attempts are made to correct the conceptual confusionsurrounding the norm of 'disinterestedness' in science (‘uhildethed’), and the norm of scientific...

Scientific meetings

International Nuclear Information System (INIS)

1973-01-01

One of the main aims of the IAEA is to foster the exchange of scientific and technical information and one of the main ways of doing this is to convene international scientific meetings. They range from large international conferences bringing together several hundred scientists, smaller symposia attended by an average of 150 to 250 participants and seminars designed to instruct rather than inform, to smaller panels and study groups of 10 to 30 experts brought together to advise on a particular programme or to develop a set of regulations. The topics of these meetings cover every part of the Agency's activities and form a backbone of many of its programmes. (author)

Scientific millenarianism

International Nuclear Information System (INIS)

Weinberg, A.M.

1997-01-01

Today, for the first time, scientific concerns are seriously being addressed that span future times--hundreds, even thousands, or more years in the future. One is witnessing what the author calls scientific millenarianism. Are such concerns for the distant future exercises in futility, or are they real issues that, to the everlasting gratitude of future generations, this generation has identified, warned about and even suggested how to cope with in the distant future? Can the four potential catastrophes--bolide impact, CO 2 warming, radioactive wastes and thermonuclear war--be avoided by technical fixes, institutional responses, religion, or by doing nothing? These are the questions addressed in this paper

Scientific communication

Directory of Open Access Journals (Sweden)

Aleksander Kobylarek

2017-09-01

Full Text Available The article tackles the problem of models of communication in science. The formal division of communication processes into oral and written does not resolve the problem of attitude. The author defines successful communication as a win-win game, based on the respect and equality of the partners, regardless of their position in the world of science. The core characteristics of the process of scientific communication are indicated , such as openness, fairness, support, and creation. The task of creating the right atmosphere for science communication belongs to moderators, who should not allow privilege and differentiation of position to affect scientific communication processes.

Space reactor system and subsystem investigations: assessment of technology issues for the reactor and shield subsystem. SP-100 Program

International Nuclear Information System (INIS)

Atkins, D.F.; Lillie, A.F.

1983-01-01

As part of Rockwell's effort on the SP-100 Program, preliminary assessment has been completed of current nuclear technology as it relates to candidate reactor/shield subsystems for the SP-100 Program. The scope of the assessment was confined to the nuclear package (to the reactor and shield subsystems). The nine generic reactor subsystems presented in Rockwell's Subsystem Technology Assessment Report, ESG-DOE-13398, were addressed for the assessment

Critical appraisal of scientific articles: part 1 of a series on evaluation of scientific publications.

Science.gov (United States)

du Prel, Jean-Baptist; Röhrig, Bernd; Blettner, Maria

2009-02-01

In the era of evidence-based medicine, one of the most important skills a physician needs is the ability to analyze scientific literature critically. This is necessary to keep medical knowledge up to date and to ensure optimal patient care. The aim of this paper is to present an accessible introduction into critical appraisal of scientific articles. Using a selection of international literature, the reader is introduced to the principles of critical reading of scientific articles in medicine. For the sake of conciseness, detailed description of statistical methods is omitted. Widely accepted principles for critically appraising scientific articles are outlined. Basic knowledge of study design, structuring of an article, the role of different sections, of statistical presentations as well as sources of error and limitation are presented. The reader does not require extensive methodological knowledge. As far as necessary for critical appraisal of scientific articles, differences in research areas like epidemiology, clinical, and basic research are outlined. Further useful references are presented. Basic methodological knowledge is required to select and interpret scientific articles correctly.

Recent progress in infrared detector technologies

Science.gov (United States)

Rogalski, A.

2011-05-01

In the paper, fundamental and technological issues associated with the development and exploitation of the most advanced infrared detector technologies are discussed. In this class of detectors both photon and thermal detectors are considered. Special attention is directed to HgCdTe ternary alloys on silicon, type-II superlattices, uncooled thermal bolometers, and novel uncooled micromechanical cantilever detectors. Despite serious competition from alternative technologies and slower progress than expected, HgCdTe is unlikely to be seriously challenged for high-performance applications, applications requiring multispectral capability and fast response. However, the nonuniformity is a serious problem in the case of LWIR and VLWIR HgCdTe detectors. In this context, it is predicted that type-II superlattice system seems to be an alternative to HgCdTe in long wavelength spectral region. In well established uncooled imaging, microbolometer arrays are clearly the most used technology. Present state-of-the-art microbolometers are based on polycrystalline or amorphous materials, typically vanadium oxide (VO x) or amorphous silicon (α-Si), with only modest temperature sensitivity and noise properties. Basic efforts today are mainly focused on pixel reduction and performance enhancement. Attractive alternatives consist of low-resistance α-SiGe monocrystalline SiGe quantum wells or quantum dots. In spite of successful commercialization of uncooled microbolometers, the infrared community is still searching for a platform for thermal imagers that combine affordability, convenience of operation, and excellent performance. Recent advances in MEMS systems have lead to the development of uncooled IR detectors operating as micromechanical thermal detectors. Between them the most important are biomaterial microcantilevers.

Managing scientific information and research data

CERN Document Server

Baykoucheva, Svetla

2015-01-01

Innovative technologies are changing the way research is performed, preserved, and communicated. Managing Scientific Information and Research Data explores how these technologies are used and provides detailed analysis of the approaches and tools developed to manage scientific information and data. Following an introduction, the book is then divided into 15 chapters discussing the changes in scientific communication; new models of publishing and peer review; ethics in scientific communication; preservation of data; discovery tools; discipline-specific practices of researchers for gathering and using scientific information; academic social networks; bibliographic management tools; information literacy and the information needs of students and researchers; the involvement of academic libraries in eScience and the new opportunities it presents to librarians; and interviews with experts in scientific information and publishing.

Improving the scientific misconduct hearing process.

Science.gov (United States)

Parrish, D M

The overturning and withdrawal of several of the Office of Research Integrity's (ORI's) findings of scientific misconduct have called its role into question. The contested findings of scientific misconduct that have been tried before the hearing body have been based on lengthy and expensive ORI investigations. How could ORI have failed to prove its findings of scientific misconduct after the commitment of substantial resources that far exceed those devoted during institutional investigations? One reason may be that the current hearing process makes it difficult or impossible for ORI, institutions, or individuals to prove scientific misconduct. The hearing process has been criticized by discouraged whistleblowers who believe that their allegations of scientific misconduct should have been upheld, and by the accused for the expensive and protracted nature of the proceedings. The following article examines problems in the scientific misconduct hearing process and suggests that the process could be improved by letting administrative law judges, patent attorneys, and a scientific majority decide these cases.

Scientific Integrity Policy Creation and Implementation.

Science.gov (United States)

Koizumi, K.

2017-12-01

Ensuring the integrity of science was a priority for the Obama Administration. In March 2009, President Obama issued a Presidential Memorandum that recognized the need for the public to be able to trust the science and scientific process informing public policy decisions. In 2010, the White House Office of Science and Technology Policy (OSTP) issued a Memorandum providing guidelines for Federal departments and agencies to follow in developing scientific integrity policies. This Memorandum describes minimum standards for: (1) strengthening the foundations of scientific integrity in government, including by shielding scientific data and analysis from inappropriate political influence; (2) improving public communication about science and technology by promoting openness and transparency; (3) enhancing the ability of Federal Advisory Committees to provide independent scientific advice; and (4) supporting the professional development of government scientists and engineers. The Memorandum called upon the heads of departments and agencies to develop scientific integrity policies that meet these requirements. At the end of the Obama Administration, 24 Federal departments and agencies had developed and implemented scientific integrity policies consistent with the OSTP guidelines. This year, there are significant questions as to the Trump Administration's commitment to these scientific integrity policies and interest in the Congress in codifying these policies in law. The session will provide an update on the status of agency scientific integrity policies and legislation.

Eismitte in the Scientific Imagination

DEFF Research Database (Denmark)

Martin-Nielsen, Janet

was a setting for scientific knowledge production as well as diplomatic maneuvering, providing new insights into the history of polar exploration and the intertwining of scientific and geopolitical considerations. Author Janet Martin-Nielsen draws on new research in private, government, military......Since the first attempts by Europeans to penetrate Greenland's interior, its geometric center, Eismitte (‘middle ice’), has been one of the most forbidding but scientifically rich locations in the Arctic. Tracing its history from European contact through the Cold War, this study shows how Eismitte......, and institutional archives in many languages in multiple countries to illuminate Eismitte’s place in the scientific imagination....

Scientific Information Service at CERN

CERN Document Server

Pereira, Margarida

2016-01-01

Dissemination of information is an essential part of CERN's mission. It brings people together from all around the world and trains the scientists of tomorrow. CERN scientific output is documented and made available for the scientific community and the general public through the CERN Document Server, INSPIRE-HEP and Wikipedia. This report presents the work done in the Scientific Information Service during the summer student program.

Scientific Tourism in Armenia

Science.gov (United States)

Tashchyan, Davit

2016-12-01

The Scientific Tourism is relatively new direction in the world, however it already has managed to gain great popularity. As it is, it has arisen in 1980s, but its ideological basis comes from the earliest periods of the human history. In Armenia, it is a completely new phenomenon and still not-understandable for many people. At global level, the Scientific Tourism has several definitions: for example, as explains the member of the scientific tourist centre of Zlovlen Mrs. Pichelerova "The essence of the scientific tourism is based on the provision of the educational, cultural and entertainment needs of a group of people of people who are interested in the same thing", which in our opinion is a very comprehensive and discreet definition. We also have our own views on this type of tourism. Our philosophy is that by keeping the total principles, we put the emphasis on the strengthening of science-individual ties. Our main emphasis is on the scientific-experimental tourism. But this does not mean that we do not take steps to other forms of tourism. Studying the global experience and combining it with our resources, we are trying to get a new interdisciplinary science, which will bring together a number of different professionals as well as individuals, and as a result will have a new lore. It is in this way that an astronomer will become an archaeologist, an archaeologist will become an astrophysicist, etc. Speaking on interdisciplinary sciences, it's worth mentioning that in recent years, the role of interdisciplinary sciences at global level every day is being considered more and more important. In these terms, tourism is an excellent platform for the creation of interdisciplinary sciences and, therefore, the preparation of corresponding scholars. Nevertheless, scientific tourism is very important for the revelation, appreciation and promotion of the country's historical-cultural heritage and scientific potential. Let us not forget either that tourism in all its

Can scientific medicine incorporate alternative medicine?

Science.gov (United States)

Federspil, G; Vettor, R

2000-06-01

The authors examine the problem of defining alternative medicine, and after a brief analysis conclude that a satisfactory unifying definition of the different practices is not possible. Scientific knowledge is a function of scientific method. In turn the principle of falsifiability proposed by Karl Popper is used as a demarcation line between science and pseudoscience. They assert that the various alternative modalities do not represent authentic scientific disciplines, as they lack many of the minimum requirements of scientific discourse and, above all, because they violate the principle of falsifiability. Until they overcome these methodological shortcomings, alternative medical practices cannot become authentic scientific disciplines.

Infrared detectors and focal plane arrays II; Proceedings of the Meeting, Orlando, FL, Apr. 23, 24, 1992

Science.gov (United States)

Dereniak, Eustace L.; Sampson, Robert E.

The present conference discusses Schottky-barrier IR image sensors, SWIR and MWIR Schottky-barrier imagers, a 640 x 640 PtSi, models of nonlinearities in focal plane arrays, retinal function relative to IRT focal plane arrays, a solid-state pyroelectric imager, and electrolyte electroreflectance spectroscopies for the ion-implanted HgCdTe with thermal annealing. Also discussed are HgCdTe hybrid focal plane arrays for thermoelectrically cooled applications, a novel IR detector plasma-edge detector, and IR detector circuits using monolithic CMOS amps with InSb detectors. (No individual items are abstracted in this volume)

Modern Scientific Literacy: A Case Study of Multiliteracies and Scientific Practices in a Fifth Grade Classroom

Science.gov (United States)

Allison, Elizabeth; Goldston, M. Jenice

2018-01-01

This study investigates the convergence of multiliteracies and scientific practices in a fifth grade classroom. As students' lives become increasingly multimodal, diverse, and globalized, the traditional notions of literacy must be revisited (New London Group 1996). With the adoption of the Next Generation Science Standards (NGSS Lead States 2013a) in many states, either in their entirety or in adapted forms, it becomes useful to explore the interconnectedness multiliteracies and scientific practices and the resulting implications for scientific literacy. The case study included a fifth grade classroom, including the students and teacher. In order to create a rich description of the cases involved, data were collected and triangulated through teacher interviews, student interviews and focus groups, and classroom observations. Findings reveal that as science activities were enriched with multiliteracies and scientific practices, students were engaged in developing skills and knowledge central to being scientifically literate. Furthermore, this study establishes that characteristics of scientific literacy, by its intent and purpose, are a form of multiliteracies in elementary classrooms. Therefore, the teaching and learning of science and its practices for scientific literacy are in turn reinforcing the development of broader multiliteracies.

International scientific seminar «Chronicle of Nature – a common database for scientific analysis and joint planning of scientific publications»

Directory of Open Access Journals (Sweden)

Juri P. Kurhinen

2016-05-01

Full Text Available Provides information about the results of the international scienti fic seminar «Сhronicle of Nature – a common database for scientific analysis and joint planning of scientific publications», held at Findland-Russian project «Linking environmental change to biodiversity change: large scale analysis оf Eurasia ecosystem».

Age and Scientific Performance.

Science.gov (United States)

Cole, Stephen

1979-01-01

The long-standing belief that age is negatively associated with scientific productivity and creativity is shown to be based upon incorrect analysis of data. Studies reported in this article suggest that the relationship between age and scientific performance is influenced by the operation of the reward system. (Author)

SCIENTIFIC STUDY OF NATURE AND SCIENTIFIC STUDY OF CULTURE: INTE-GRATION TREND, PRACTICAL VALUE

Directory of Open Access Journals (Sweden)

Fokina Zoya Titovna

2017-03-01

Full Text Available This article deals with a topic of interest : studying the expanding and deepening trend of integration of natural, technical, social and humanities fields of scientific knowledge. The point of absolute opposition between the sciences dealing with nature and those dealing with culture is subjected to criticism, the forms of integration of scientific knowledge are identified: mathematization, formalization, computerization of knowledge; philosophization/dialectization and environmentalization of the scientific knowledge. It is noted that such areas of scientific knowledge as synergetics, cybernetics, system theory, information technology, sociosynergetics, historical informatics, cliometrics, informatics for economics, evolutionary economics, human ecology, etc. Many scientific fields appear on the border between the science, technology and mathematics, and social and humanities studies, while the sharp borders between the natural sciences and cultural sciences tend to disappear, although specifics of studying the social reality still exists. Within the context of integration of sciences, comprehensive approach, synergetics, cybernetics, and mathematical model approach are analyzed. The philosophy of technology, and environmental problems, which are caused by the development of technological civilization, are studied. Practical value of integration processes in science is identified. The studied data is addressed to the specialists who are interested in the modern processes of integration of sciences, and modern issues of scientific and technical development of humanity, survival of humanity under the conditions of increasing technological understanding of the nature.

Didactical-Scientific Modeling: integrating experimental activities and the process of scientific modeling in the teaching of Physics

Directory of Open Access Journals (Sweden)

Leonardo Albuquerque Heidemann

2016-04-01

Full Text Available The dissociated way with which the theory and practice are often treated in Physics teaching contributes to students' difficulties in using scientific knowledge to represent real events, which are not idealized situations as the events presented in most textbook problems. Considering that the process of scientific modeling is of fundamental importance for students to learn Science, about Science and how to do Science, Brandão, Araujo and Veit, supported by Vergnaud's Theory of Conceptual Fields and by Bunge's concept of scientific modeling, propose a theoretical-methodological framework for modeling in Physics Education named Didactical-Scientific Modeling (DSM. The authors defend the thesis that it is possible to consider the process of scientific modeling as a conceptual field underlying the specific conceptual fields of Physics. They elucidate knowledge associated to the facing of problems that involve the use, exploration and validation of didactical versions of scientific models. However, the goal of this framework is not to explain how the concepts related to empirical testability are connected to scientific modeling concepts. In order to fill this gap, we present in this article an expansion of this theoretical-methodological framework based on Bunge's concepts on contrasting scientific ideas. In this regard, we insert experimental work concepts in the conceptual field associated to the process of didactical-scientific modeling. Lastly, we exemplify its use in order to support the design and execution of experimental activities focused on the scientific-didactical process, and we also discuss some implications for future research in Physics Education.

Scientific evaluation at the CEA

International Nuclear Information System (INIS)

1999-01-01

This report presents a statement of the scientific and technical activity of the French atomic energy commission (CEA) for the year 1998. This evaluation is made by external and independent experts and requires some specific dispositions for the nuclear protection and safety institute (IPSN) and for the direction of military applications (DAM). The report is divided into 5 parts dealing successively with: part 1 - the CEA, a public research organization (civil nuclear research, technology research and transfers, defence activities); the scientific and technical evaluation at the CEA (general framework, evaluation of the IPSN and DAM); part 2 - the scientific and technical councils (directions of fuel cycle, of nuclear reactors, and of advanced technologies); part 3 - the scientific councils (directions of matter and of life sciences); the nuclear protection and safety institute; the direction of military applications; part 4 - the corresponding members of the evaluation; part 5 - the list of scientific and technical councils and members. (J.S.)

Mastering scientific computing with R

CERN Document Server

Gerrard, Paul

2015-01-01

If you want to learn how to quantitatively answer scientific questions for practical purposes using the powerful R language and the open source R tool ecosystem, this book is ideal for you. It is ideally suited for scientists who understand scientific concepts, know a little R, and want to be able to start applying R to be able to answer empirical scientific questions. Some R exposure is helpful, but not compulsory.

EPA scientific integrity policy draft

Science.gov (United States)

Showstack, Randy

2011-08-01

The U.S. Environmental Protection Agency (EPA) issued its draft scientific integrity policy on 5 August. The draft policy addresses scientific ethical standards, communications with the public, the use of advisory committees and peer review, and professional development. The draft policy was developed by an ad hoc group of EPA senior staff and scientists in response to a December 2010 memorandum on scientific integrity from the White House Office of Science and Technology Policy. The agency is accepting public comments on the draft through 6 September; comments should be sent to osa.staff@epa.gov. For more information, see http://www.epa.gov/stpc/pdfs/draft-scientific-integrity-policy-aug2011.pdf.

The martial art of scientific publication

Science.gov (United States)

Parker, E. N.

Publication of scientific results in refereed journals is an essential part of the scientific process. It is the final payoff for the obscure labors that compose scientific research. Unfortunately, effective operation of the publication procedure requires simultaneous rational scientific judgment on the part of the author, the referee, and the editor, and the coincidence of all of these cannot be taken for granted on every given occasion. There are times when the working definition of truth is taken to be the consensus of one's scientific intimates: the “good old boys.” Anything outside that limited horizon is discomforting and improper and is to be barred from consideration.

Scientific and non-scientific information in the uptake of health information: The case of Ebola

Directory of Open Access Journals (Sweden)

Bankole A. Falade

2017-07-01

Full Text Available The Ebola virus disease outbreak in West Africa (2013–2016 claimed over 10 000 lives in less than 18 months. Low levels of familiarity with the disease, ease of transmission, scale of infection, gruesomeness of symptoms, lack of cure and high fatality rate created a global panic. From the perspective of the social psychology of communication and content analysis, this study examines media coverage of the crisis in Africa with a view to unpacking the scientific and non-scientific information that may have framed public understanding of the disease. Findings show that accepting scientific advice was not unproblematic, because of the similarity of early symptoms with known diseases such as Lassa, dengue and malaria fevers. Cultural and religious actors and beliefs posed a paradox for believers as the public assimilated disease prevention information into existing norms and practices. Rumours and conspiracy theories about Western governments and pharmaceuticals also contributed to the rejection of the scientific explanation of its origin. Fear of the devastating effects of the disease and the lack of a cure led to the stigmatisation of the infected and treatment centres and ultimately to public revolts. Findings show the importance of non-scientific information and actors in matters of health and illness in Africa. Significance: Scientific knowledge is not enough to change health behaviour. Non-scientific knowledge and actors, traditional and religious practices, rumours and conspiracy theories must all be factored into efforts to address behavioural change.

DOE Advanced Scientific Computing Advisory Committee (ASCAC) Subcommittee Report on Scientific and Technical Information

Energy Technology Data Exchange (ETDEWEB)

Hey, Tony [eScience Institute, University of Washington; Agarwal, Deborah [Lawrence Berkeley National Laboratory; Borgman, Christine [University of California, Los Angeles; Cartaro, Concetta [SLAC National Accelerator Laboratory; Crivelli, Silvia [Lawrence Berkeley National Laboratory; Van Dam, Kerstin Kleese [Pacific Northwest National Laboratory; Luce, Richard [University of Oklahoma; Arjun, Shankar [CADES, Oak Ridge National Laboratory; Trefethen, Anne [University of Oxford; Wade, Alex [Microsoft Research, Microsoft Corporation; Williams, Dean [Lawrence Livermore National Laboratory

2015-09-04

The Advanced Scientific Computing Advisory Committee (ASCAC) was charged to form a standing subcommittee to review the Department of Energy’s Office of Scientific and Technical Information (OSTI) and to begin by assessing the quality and effectiveness of OSTI’s recent and current products and services and to comment on its mission and future directions in the rapidly changing environment for scientific publication and data. The Committee met with OSTI staff and reviewed available products, services and other materials. This report summaries their initial findings and recommendations.

The GTC Scientific Data Centre

Science.gov (United States)

Solano, E.

2005-12-01

Since the early stages of the GTC project, the need of a scientific archive was already identified as an important tool for the scientific exploitation of the data. In this work, the conceptual design and the main functionalities of the Scientific Data Archive of the Gran Telescopio Canarias (GSA) are described. The system will be developed, implemented and maintained at the Laboratorio de Astrofísica Espacial y Física Fundamental (LAEFF).

XVIS: Visualization for the Extreme-Scale Scientific-Computation Ecosystem Final Scientific/Technical Report

Energy Technology Data Exchange (ETDEWEB)

Geveci, Berk [Kitware, Inc., Clifton Park, NY (United States); Maynard, Robert [Kitware, Inc., Clifton Park, NY (United States)

2017-10-27

The XVis project brings together the key elements of research to enable scientific discovery at extreme scale. Scientific computing will no longer be purely about how fast computations can be performed. Energy constraints, processor changes, and I/O limitations necessitate significant changes in both the software applications used in scientific computation and the ways in which scientists use them. Components for modeling, simulation, analysis, and visualization must work together in a computational ecosystem, rather than working independently as they have in the past. The XVis project brought together collaborators from predominant DOE projects for visualization on accelerators and combining their respective features into a new visualization toolkit called VTK-m.

The Scientific Case against Astrology.

Science.gov (United States)

Kelly, Ivan

1980-01-01

Discussed is the lack of a scientific foundation and scientific evidence favoring astrology. Included are several research studies conducted to examine astrological tenets which yield generally negative results. (Author/DS)

Scientific word, Version 1.0

Directory of Open Access Journals (Sweden)

Semen Köksal

1993-01-01

Full Text Available Scientific Word is the first fully integrated mathematical word processor in the Windows 3.1 environment, which uses the TEX typesetting language for output. It runs as a Microsoft Windows application program and has two-way interface to TEX. The Scientific Word is an object-oriented WYSIWYG word processor for virtually all users who need typesetting scientific books, manuals and papers. It includes automatic equation numbering, spell checking, and LATEX and DVI previewer.

Scientific computer simulation review

International Nuclear Information System (INIS)

Kaizer, Joshua S.; Heller, A. Kevin; Oberkampf, William L.

2015-01-01

Before the results of a scientific computer simulation are used for any purpose, it should be determined if those results can be trusted. Answering that question of trust is the domain of scientific computer simulation review. There is limited literature that focuses on simulation review, and most is specific to the review of a particular type of simulation. This work is intended to provide a foundation for a common understanding of simulation review. This is accomplished through three contributions. First, scientific computer simulation review is formally defined. This definition identifies the scope of simulation review and provides the boundaries of the review process. Second, maturity assessment theory is developed. This development clarifies the concepts of maturity criteria, maturity assessment sets, and maturity assessment frameworks, which are essential for performing simulation review. Finally, simulation review is described as the application of a maturity assessment framework. This is illustrated through evaluating a simulation review performed by the U.S. Nuclear Regulatory Commission. In making these contributions, this work provides a means for a more objective assessment of a simulation’s trustworthiness and takes the next step in establishing scientific computer simulation review as its own field. - Highlights: • We define scientific computer simulation review. • We develop maturity assessment theory. • We formally define a maturity assessment framework. • We describe simulation review as the application of a maturity framework. • We provide an example of a simulation review using a maturity framework

Recording Scientific Knowledge

International Nuclear Information System (INIS)

Bowker, Geof

2006-01-01

The way we record knowledge, and the web of technical, formal, and social practices that surrounds it, inevitably affects the knowledge that we record. The ways we hold knowledge about the past - in handwritten manuscripts, in printed books, in file folders, in databases - shape the kind of stories we tell about that past. In this talk, I look at how over the past two hundred years, information technology has affected the nature and production of scientific knowledge. Further, I explore ways in which the emergent new cyberinfrastructure is changing our relationship to scientific practice.

A generative model for scientific concept hierarchies.

Science.gov (United States)

Datta, Srayan; Adar, Eytan

2018-01-01

In many scientific disciplines, each new 'product' of research (method, finding, artifact, etc.) is often built upon previous findings-leading to extension and branching of scientific concepts over time. We aim to understand the evolution of scientific concepts by placing them in phylogenetic hierarchies where scientific keyphrases from a large, longitudinal academic corpora are used as a proxy of scientific concepts. These hierarchies exhibit various important properties, including power-law degree distribution, power-law component size distribution, existence of a giant component and less probability of extending an older concept. We present a generative model based on preferential attachment to simulate the graphical and temporal properties of these hierarchies which helps us understand the underlying process behind scientific concept evolution and may be useful in simulating and predicting scientific evolution.

A generative model for scientific concept hierarchies

Science.gov (United States)

Adar, Eytan

2018-01-01

In many scientific disciplines, each new ‘product’ of research (method, finding, artifact, etc.) is often built upon previous findings–leading to extension and branching of scientific concepts over time. We aim to understand the evolution of scientific concepts by placing them in phylogenetic hierarchies where scientific keyphrases from a large, longitudinal academic corpora are used as a proxy of scientific concepts. These hierarchies exhibit various important properties, including power-law degree distribution, power-law component size distribution, existence of a giant component and less probability of extending an older concept. We present a generative model based on preferential attachment to simulate the graphical and temporal properties of these hierarchies which helps us understand the underlying process behind scientific concept evolution and may be useful in simulating and predicting scientific evolution. PMID:29474409

The balance principle in scientific research.

Science.gov (United States)

Hu, Liang-ping; Bao, Xiao-lei; Wang, Qi

2012-05-01

The principles of balance, randomization, control and repetition, which are closely related, constitute the four principles of scientific research. The balance principle is the kernel of the four principles which runs through the other three. However, in scientific research, the balance principle is always overlooked. If the balance principle is not well performed, the research conclusion is easy to be denied, which may lead to the failure of the whole research. Therefore, it is essential to have a good command of the balance principle in scientific research. This article stresses the definition and function of the balance principle, the strategies and detailed measures to improve balance in scientific research, and the analysis of the common mistakes involving the use of the balance principle in scientific research.

Computational Simulations and the Scientific Method

Science.gov (United States)

Kleb, Bil; Wood, Bill

2005-01-01

As scientific simulation software becomes more complicated, the scientific-software implementor's need for component tests from new model developers becomes more crucial. The community's ability to follow the basic premise of the Scientific Method requires independently repeatable experiments, and model innovators are in the best position to create these test fixtures. Scientific software developers also need to quickly judge the value of the new model, i.e., its cost-to-benefit ratio in terms of gains provided by the new model and implementation risks such as cost, time, and quality. This paper asks two questions. The first is whether other scientific software developers would find published component tests useful, and the second is whether model innovators think publishing test fixtures is a feasible approach.

Scientific rigor through videogames.

Science.gov (United States)

Treuille, Adrien; Das, Rhiju

2014-11-01

Hypothesis-driven experimentation - the scientific method - can be subverted by fraud, irreproducibility, and lack of rigorous predictive tests. A robust solution to these problems may be the 'massive open laboratory' model, recently embodied in the internet-scale videogame EteRNA. Deploying similar platforms throughout biology could enforce the scientific method more broadly. Copyright © 2014 Elsevier Ltd. All rights reserved.

Scientific production and technological production: transforming a scientific paper into patent applications.

Science.gov (United States)

Dias, Cleber Gustavo; Almeida, Roberto Barbosa de

2013-01-01

Brazil has been presenting in the last years a scientific production well-recognized in the international scenario, in several areas of knowledge, according to the impact of their publications in important events and especially in indexed journals of wide circulation. On the other hand, the country does not seem to be in the same direction regarding to the technological production and wealth creation from the established scientific development, and particularly from the applied research. The present paper covers such issue and discloses the main similarities and differences between a scientific paper and a patent application, in order to contribute to a better understanding of both types of documents and help the researchers to chose and select the results with technological potential, decide what is appropriated for industrial protection, as well as foster new business opportunities for each technology which has been created.

Continuous EEG monitoring in the intensive care unit: beta scientific and management scientific aspects

NARCIS (Netherlands)

Sanders, P.M.H.; van Putten, Michel Johannes Antonius Maria; Jarm, T.; Kramar, P.; Zupanic, A.

2007-01-01

Due to various technological advances, it is now possible to continuously monitor critically ill patients using EEG, including the extraction of various quantitative features. In this study, several beta scientific and management scientific aspects of the implementation and use of cEEg on the ICU

Agriscience Student Engagement in Scientific Inquiry: Representations of Scientific Processes and Nature of Science.

Science.gov (United States)

Grady, Julie R; Dolan, Erin L; Glasson, George E

2010-01-01

Students' experiences with science integrated into agriscience courses contribute to their developing epistemologies of science. The purpose of this case study was to gain insight into the implementation of scientific inquiry in an agriscience classroom. Also of interest was how the tenets of the nature of science were reflected in the students' experiments. Participants included an agriscience teacher and her fifteen students who were conducting plant experiments to gain insight into the role of a gene disabled by scientists. Data sources included classroom observations, conversations with students, face-to-face interviews with the teacher, and students' work. Analysis of the data indicated that the teacher viewed scientific inquiry as a mechanical process with little emphasis on the reasoning that typifies scientific inquiry. Students' participation in their experiments also centered on the procedural aspects of inquiry with little attention to scientific reasoning. There was no explicit attention to the nature of science during the experiments, but the practice implied correct, incorrect, and underdeveloped conceptions of the nature of science. Evidence from the study suggests a need for collaboration between agriscience and science teacher educators to design and conduct professional development focused on scientific inquiry and nature of science for preservice and practicing teachers.

Scientific Misconduct.

Science.gov (United States)

Goodstein, David

2002-01-01

Explores scientific fraud, asserting that while few scientists actually falsify results, the field has become so competitive that many are misbehaving in other ways; an example would be unreasonable criticism by anonymous peer reviewers. (EV)

Strengthening maintenance and reconstruction of scientific experiment building and creating a good working environment for scientific research and production

International Nuclear Information System (INIS)

Fu Jianping

2005-01-01

The quality of scientific experiment building directly influences the scientific research work and production. To create a good working environment for scientific research and production, it is necessary to strengthen the maintenance and reconstruction for old scientific experiment building. The paper briefly introduces the site supervisory work of maintaining and reconstructing old scientific experiment building in Beijing Research Institute of Uranium Geology, as well as some measures taken to ensure the project quality, and the reconstructed building. (authors)

[Eleven thesis on the archive of scientific research, for a new patrimonial and scientific policy].

Science.gov (United States)

Müller, Bertrand

2015-12-01

Abstracting the main content of a recent report on the bad state of the archives of scientific research, this paper puts forward eleven thesis likely to feed, in this time of numeric transition to a new documentary regime and to a new patrimonial policy. The recent numeric conditions impose to set new archival pratices, more proactive, anticipative and prospective. Archives of scientific research must be thought in a double memorial and scientific dimension, and not only as a patrimonial or historical one.

Is risk analysis scientific?

Science.gov (United States)

Hansson, Sven Ove; Aven, Terje

2014-07-01

This article discusses to what extent risk analysis is scientific in view of a set of commonly used definitions and criteria. We consider scientific knowledge to be characterized by its subject matter, its success in developing the best available knowledge in its fields of study, and the epistemic norms and values that guide scientific investigations. We proceed to assess the field of risk analysis according to these criteria. For this purpose, we use a model for risk analysis in which science is used as a base for decision making on risks, which covers the five elements evidence, knowledge base, broad risk evaluation, managerial review and judgment, and the decision; and that relates these elements to the domains experts and decisionmakers, and to the domains fact-based or value-based. We conclude that risk analysis is a scientific field of study, when understood as consisting primarily of (i) knowledge about risk-related phenomena, processes, events, etc., and (ii) concepts, theories, frameworks, approaches, principles, methods and models to understand, assess, characterize, communicate, and manage risk, in general and for specific applications (the instrumental part). © 2014 Society for Risk Analysis.

Scientific Facts and Methods in Public Reason

DEFF Research Database (Denmark)

Jønch-Clausen, Karin; Kappel, Klemens

2016-01-01

Should scientific facts and methods have an epistemically privileged status in public reason? In Rawls’s public reason account he asserts what we will label the Scientific Standard Stricture: citizens engaged in public reason must be guided by non-controversial scientific methods, and public reason...... must be in line with non-controversial scientific conclusions. The Scientific Standard Stricture is meant to fulfill important tasks such as enabling the determinateness and publicity of the public reason framework. However, Rawls leaves us without elucidation with regard to when science...

Network effects on scientific collaborations.

Directory of Open Access Journals (Sweden)

Shahadat Uddin

Full Text Available BACKGROUND: The analysis of co-authorship network aims at exploring the impact of network structure on the outcome of scientific collaborations and research publications. However, little is known about what network properties are associated with authors who have increased number of joint publications and are being cited highly. METHODOLOGY/PRINCIPAL FINDINGS: Measures of social network analysis, for example network centrality and tie strength, have been utilized extensively in current co-authorship literature to explore different behavioural patterns of co-authorship networks. Using three SNA measures (i.e., degree centrality, closeness centrality and betweenness centrality, we explore scientific collaboration networks to understand factors influencing performance (i.e., citation count and formation (tie strength between authors of such networks. A citation count is the number of times an article is cited by other articles. We use co-authorship dataset of the research field of 'steel structure' for the year 2005 to 2009. To measure the strength of scientific collaboration between two authors, we consider the number of articles co-authored by them. In this study, we examine how citation count of a scientific publication is influenced by different centrality measures of its co-author(s in a co-authorship network. We further analyze the impact of the network positions of authors on the strength of their scientific collaborations. We use both correlation and regression methods for data analysis leading to statistical validation. We identify that citation count of a research article is positively correlated with the degree centrality and betweenness centrality values of its co-author(s. Also, we reveal that degree centrality and betweenness centrality values of authors in a co-authorship network are positively correlated with the strength of their scientific collaborations. CONCLUSIONS/SIGNIFICANCE: Authors' network positions in co

Scientific-creative thinking and academic achievement

Directory of Open Access Journals (Sweden)

Rosario Bermejo

2014-07-01

Full Text Available The aim of this work is to study the relationship between scientific-creative thinking construct and academic performance in a sample of adolescents. In addition, the scientific-creative thinking instrument’s reliability will be tested. The sample was composed of 98 students (aged between 12-16 years old attending to a Secondary School in Murcia Region (Spain. The used instruments were: a the Scientific-Creative Thinking Test designed by Hu and Adey (2002, which was adapted to the Spanish culture by the High Abilities research team at Murcia University. The test is composed of 7 task based in the Scientific Creative Structure Model. It assesses the dimensions fluency, flexibility and originality; b The General and Factorial Intelligence Test (IGF/5r; Yuste, 2002, which assess the abilities of general intelligence and logic reasoning, verbal reasoning, numerical reasoning and spatial reasoning; c Students’ academic achievement by domains (scientific-technological, social-linguistic and artistic was collected. The results showed positive and statistical significant correlations between the scientific-creative tasks and academic achievement of different domains.

Scientific impact: opportunity and necessity.

Science.gov (United States)

Cohen, Marlene Z; Alexander, Gregory L; Wyman, Jean F; Fahrenwald, Nancy L; Porock, Davina; Wurzbach, Mary E; Rawl, Susan M; Conn, Vicki S

2010-08-01

Recent National Institutes of Health changes have focused attention on the potential scientific impact of research projects. Research with the excellent potential to change subsequent science or health care practice may have high scientific impact. Only rigorous studies that address highly significant problems can generate change. Studies with high impact may stimulate new research approaches by changing understanding of a phenomenon, informing theory development, or creating new research methods that allow a field of science to move forward. Research with high impact can transition health care to more effective and efficient approaches. Studies with high impact may propel new policy developments. Research with high scientific impact typically has both immediate and sustained influence on the field of study. The article includes ideas to articulate potential scientific impact in grant applications as well as possible dissemination strategies to enlarge the impact of completed projects.

The PBase Scientific Workflow Provenance Repository

Directory of Open Access Journals (Sweden)

Víctor Cuevas-Vicenttín

2014-10-01

Full Text Available Scientific workflows and their supporting systems are becoming increasingly popular for compute-intensive and data-intensive scientific experiments. The advantages scientific workflows offer include rapid and easy workflow design, software and data reuse, scalable execution, sharing and collaboration, and other advantages that altogether facilitate “reproducible science”. In this context, provenance – information about the origin, context, derivation, ownership, or history of some artifact – plays a key role, since scientists are interested in examining and auditing the results of scientific experiments. However, in order to perform such analyses on scientific results as part of extended research collaborations, an adequate environment and tools are required. Concretely, the need arises for a repository that will facilitate the sharing of scientific workflows and their associated execution traces in an interoperable manner, also enabling querying and visualization. Furthermore, such functionality should be supported while taking performance and scalability into account. With this purpose in mind, we introduce PBase: a scientific workflow provenance repository implementing the ProvONE proposed standard, which extends the emerging W3C PROV standard for provenance data with workflow specific concepts. PBase is built on the Neo4j graph database, thus offering capabilities such as declarative and efficient querying. Our experiences demonstrate the power gained by supporting various types of queries for provenance data. In addition, PBase is equipped with a user friendly interface tailored for the visualization of scientific workflow provenance data, making the specification of queries and the interpretation of their results easier and more effective.

Scientific legacy of Stanley Ruby

International Nuclear Information System (INIS)

Shenoy, G. K.

2006-01-01

Stanley L. Ruby (1924-2004) made major contributions to Moessbauer spectroscopy and was the first to suggest the feasibility of observing the Moessbauer effect using synchrotron radiation. In this article we recall his scientific legacy that have inspired his scientific colleagues.

Software Defects, Scientific Computation and the Scientific Method

CERN Multimedia

CERN. Geneva

2011-01-01

Computation has rapidly grown in the last 50 years so that in many scientific areas it is the dominant partner in the practice of science. Unfortunately, unlike the experimental sciences, it does not adhere well to the principles of the scientific method as espoused by, for example, the philosopher Karl Popper. Such principles are built around the notions of deniability and reproducibility. Although much research effort has been spent on measuring the density of software defects, much less has been spent on the more difficult problem of measuring their effect on the output of a program. This talk explores these issues with numerous examples suggesting how this situation might be improved to match the demands of modern science. Finally it develops a theoretical model based on an amalgam of statistical mechanics and Hartley/Shannon information theory which suggests that software systems have strong implementation independent behaviour and supports the widely observed phenomenon that defects clust...

Mapping the evolution of scientific fields.

Science.gov (United States)

Herrera, Mark; Roberts, David C; Gulbahce, Natali

2010-05-04

Despite the apparent cross-disciplinary interactions among scientific fields, a formal description of their evolution is lacking. Here we describe a novel approach to study the dynamics and evolution of scientific fields using a network-based analysis. We build an idea network consisting of American Physical Society Physics and Astronomy Classification Scheme (PACS) numbers as nodes representing scientific concepts. Two PACS numbers are linked if there exist publications that reference them simultaneously. We locate scientific fields using a community finding algorithm, and describe the time evolution of these fields over the course of 1985-2006. The communities we identify map to known scientific fields, and their age depends on their size and activity. We expect our approach to quantifying the evolution of ideas to be relevant for making predictions about the future of science and thus help to guide its development.

The development of scientific literacy assessment to measure student’s scientific literacy skills in energy theme

Science.gov (United States)

Rusilowati, A.; Nugroho, S. E.; Susilowati, E. S. M.; Mustika, T.; Harfiyani, N.; Prabowo, H. T.

2018-03-01

The research were aimed to develop and find out of validity, reliability, characteristic of scientific literacy assessment, and find out of the profile of students’ scientific literacy skills in Energy themed. The research is conducted in 7th grade of Secondary School at Demak, Central of Java Indonesia. The research design used R&D (Research and Development). The results of the research showed that the scientific literacy assessment was valid and reliable with 0.68 value in the first try out and 0.73 value in the last try out. The characteristics of the scientific literacy assessment are the difficulty index and the discrimination power. The difficulty index and distinguishing are 56.25% easy, 31.25% medium, and 12.5% very difficult with good discrimination power. The proportion of category of scientific literacy as the body of knowledge, the science as a way of investigating, science as a way of thinking, and the interaction among science, environment, technology, and society was 37.5%:25%:18.75%:18.75%. The highest to the lowest profile of students’ scientific literacy skills at Secondary School Demak was 72% in the category of science as a way of thinking and the lowest was 59% in the category of science as the body of knowledge.

Mythical thinking, scientific discourses and research dissemination.

Science.gov (United States)

Hroar Klempe, Sven

2011-06-01

This article focuses on some principles for understanding. By taking Anna Mikulak's article "Mismatches between 'scientific' and 'non-scientific' ways of knowing and their contributions to public understanding of science" (IPBS 2011) as a point of departure, the idea of demarcation criteria for scientific and non-scientific discourses is addressed. Yet this is juxtaposed with mythical thinking, which is supposed to be the most salient trait of non-scientific discourses. The author demonstrates how the most widespread demarcation criterion, the criterion of verification, is self-contradictory, not only when it comes to logic, but also in the achievement of isolating natural sciences from other forms of knowledge. According to Aristotle induction is a rhetorical device and as far as scientific statements are based on inductive inferences, they are relying on humanities, which rhetoric is a part of. Yet induction also has an empirical component by being based on sense-impressions, which is not a part of the rhetoric, but the psychology. Also the myths are understood in a rhetorical (Lévi-Strauss) and a psychological (Cassirer) perspective. Thus it is argued that both scientific and non-scientific discourses can be mythical.

Scientific information processing procedures

Directory of Open Access Journals (Sweden)

García, Maylin

2013-07-01

Full Text Available The paper systematizes several theoretical view-points on scientific information processing skill. It decomposes the processing skills into sub-skills. Several methods such analysis, synthesis, induction, deduction, document analysis were used to build up a theoretical framework. Interviews and survey to professional being trained and a case study was carried out to evaluate the results. All professional in the sample improved their performance in scientific information processing.

[The fate of scientific articles when errors and scientific misconduct are detected].

Science.gov (United States)

Vinther, Siri; Rosenberg, Jacob

2014-01-20

When a minor error is noted in a scientific article, the publishing journal should issue a correction. Issuing an expression of concern is relevant when scientific misconduct is suspected. If the suspicion proves to be well founded, the journal should retract the article. The number of retractions is increasing, and this emphasizes the need for unequivocal concepts and guidelines. The reason a given article is corrected or retracted should be unambiguous and articles as well as notices should be indexed properly.

Scientific Progress in Strategic Management

DEFF Research Database (Denmark)

Foss, Nicolai Juul

Does the RBV represent a case of scientific progress? And has it emerged as the dominant approach to the analysis of competitive advantage for this reason? Conventional criteria for scientific progress, notably those of the growth of knowledge literature, are not particularly helpful for understa...

Biomedical ontologies: toward scientific debate.

Science.gov (United States)

Maojo, V; Crespo, J; García-Remesal, M; de la Iglesia, D; Perez-Rey, D; Kulikowski, C

2011-01-01

Biomedical ontologies have been very successful in structuring knowledge for many different applications, receiving widespread praise for their utility and potential. Yet, the role of computational ontologies in scientific research, as opposed to knowledge management applications, has not been extensively discussed. We aim to stimulate further discussion on the advantages and challenges presented by biomedical ontologies from a scientific perspective. We review various aspects of biomedical ontologies going beyond their practical successes, and focus on some key scientific questions in two ways. First, we analyze and discuss current approaches to improve biomedical ontologies that are based largely on classical, Aristotelian ontological models of reality. Second, we raise various open questions about biomedical ontologies that require further research, analyzing in more detail those related to visual reasoning and spatial ontologies. We outline significant scientific issues that biomedical ontologies should consider, beyond current efforts of building practical consensus between them. For spatial ontologies, we suggest an approach for building "morphospatial" taxonomies, as an example that could stimulate research on fundamental open issues for biomedical ontologies. Analysis of a large number of problems with biomedical ontologies suggests that the field is very much open to alternative interpretations of current work, and in need of scientific debate and discussion that can lead to new ideas and research directions.

Making better scientific figures

Science.gov (United States)

Hawkins, Ed; McNeall, Doug

2016-04-01

In the words of the UK government chief scientific adviser "Science is not finished until it's communicated" (Walport 2013). The tools to produce good visual communication have never been so easily accessible to scientists as at the present. Correspondingly, it has never been easier to produce and disseminate poor graphics. In this presentation, we highlight some good practice and offer some practical advice in preparing scientific figures for presentation to peers or to the public. We identify common mistakes in visualisation, including some made by the authors, and offer some good reasons not to trust defaults in graphics software. In particular, we discuss the use of colour scales and share our experiences in running a social media campaign (http://tiny.cc/endrainbow) to replace the "rainbow" (also "jet", or "spectral") colour scale as the default in (climate) scientific visualisation.

Soil surface decontamination and revegetation progress

International Nuclear Information System (INIS)

Graves, A.W.

1981-01-01

A review is given of work by Rockwell Hanford Operations related to large-area decontamination efforts. Rockwell has a Program Office which manages the decontamination and decommissioning (D and D) efforts. Part of the program is involved with large-surface area cleanup in conjunction with surveillance and maintenance of retired sites and facilities. The other part is the decontamination and decommissioning of structures. There are 322 surplus contaminated sites and facilities for which Rockwell has responsibility on the Hanford Site. A Program Office was established for a disciplined approach to cleanup of these retired sites. There are three major projects: the first is surveillance and maintenance of the sites prior to D and D, the project under which the radiation area cleanup is contained. Another project is for contaminated-equipment volume reduction; size reduction with arc saw cut-up and volume reduction with a vacuum furnace meltdown are being used. The third major project is structural D and D

Robotics development for the enhancement of space endeavors

Science.gov (United States)

Mauceri, A. J.; Clarke, Margaret M.

Telerobotics and robotics development activities to support NASA's goal of increasing opportunities in space commercialization and exploration are described. The Rockwell International activities center is using robotics to improve efficiency and safety in three related areas: remote control of autonomous systems, automated nondestructive evaluation of aspects of vehicle integrity, and the use of robotics in space vehicle ground reprocessing operations. In the first area, autonomous robotic control, Rockwell is using the control architecture, NASREM, as the foundation for the high level command of robotic tasks. In the second area, we have demonstrated the use of nondestructive evaluation (using acoustic excitation and lasers sensors) to evaluate the integrity of space vehicle surface material bonds, using Orbiter 102 as the test case. In the third area, Rockwell is building an automated version of the present manual tool used for Space Shuttle surface tile re-waterproofing. The tool will be integrated into an orbiter processing robot being developed by a KSC-led team.

Scientific papers for health informatics.

Science.gov (United States)

Pereira, Samáris Ramiro; Duarte, Jacy Marcondes; Bandiera-Paiva, Paulo

2013-01-01

From the hypothesis that the development of scientific papers, mainly in interdisciplinary areas such as Health Informatics, may bring difficulties to the author, as had its communicative efficacy decreased or compromising their approval for publication; we aim to make considerations on the main items to good players making this kind of text. The scientific writing has peculiarities that must be taken into consideration when it writes: general characteristics, such as simplicity and objectivity, and characteristics of each area of knowledge, such as terminology, formatting and standardization. The research methodology adopted is bibliographical. The information was based on literature review and the authors' experience, teachers and assessors of scientific methodology in peer review publications in the area. As a result, we designed a checklist of items to be checked before submission of a paper to a scientific publication vehicle in order to contribute to the promotion of research, facilitating the publication and increase its capacity in this important area of knowledge.

Scientific Services on the Cloud

Science.gov (United States)

Chapman, David; Joshi, Karuna P.; Yesha, Yelena; Halem, Milt; Yesha, Yaacov; Nguyen, Phuong

Scientific Computing was one of the first every applications for parallel and distributed computation. To this date, scientific applications remain some of the most compute intensive, and have inspired creation of petaflop compute infrastructure such as the Oak Ridge Jaguar and Los Alamos RoadRunner. Large dedicated hardware infrastructure has become both a blessing and a curse to the scientific community. Scientists are interested in cloud computing for much the same reason as businesses and other professionals. The hardware is provided, maintained, and administrated by a third party. Software abstraction and virtualization provide reliability, and fault tolerance. Graduated fees allow for multi-scale prototyping and execution. Cloud computing resources are only a few clicks away, and by far the easiest high performance distributed platform to gain access to. There may still be dedicated infrastructure for ultra-scale science, but the cloud can easily play a major part of the scientific computing initiative.

XML Based Scientific Data Management Facility

Science.gov (United States)

Mehrotra, P.; Zubair, M.; Bushnell, Dennis M. (Technical Monitor)

2002-01-01

The World Wide Web consortium has developed an Extensible Markup Language (XML) to support the building of better information management infrastructures. The scientific computing community realizing the benefits of XML has designed markup languages for scientific data. In this paper, we propose a XML based scientific data management ,facility, XDMF. The project is motivated by the fact that even though a lot of scientific data is being generated, it is not being shared because of lack of standards and infrastructure support for discovering and transforming the data. The proposed data management facility can be used to discover the scientific data itself, the transformation functions, and also for applying the required transformations. We have built a prototype system of the proposed data management facility that can work on different platforms. We have implemented the system using Java, and Apache XSLT engine Xalan. To support remote data and transformation functions, we had to extend the XSLT specification and the Xalan package.

Roles of Illustrators in Visual Communication of Scientific Knowledge

Directory of Open Access Journals (Sweden)

Kana Okawa

2011-10-01

Full Text Available Scientific knowledge is the knowledge accumulated by systematic studies and organized by general principles. Visual, verbal, numeric, and other types of representation are used to communicate scientific knowledge. Scientific illustration is the visual representation of objects and concepts in order to record and to convey scientific knowledge(Ford, 1993. There are some discussions on scientific illustrations in history, philosophy and the sociology of science(Burri & Dumit, 2008, but little has been done on the creation of scientific illustrations by illustrators. This study focuses on the creation of scientific illustrations by illustrators. The purpose is to show how illustrators create the visual messages in communications of scientific knowledge. Through analysis of semi-structured interviews with 6 professional illustrators, creators and art directors, it is showed that illustrators select and edit scientific information, add non-scientific information, and organize information into one visual representation of scientific knowledge. The implication of this research will provide a new perspective to multisensory communication of scientific knowledge.

On Writing Scientific Articles in English

Institute of Scientific and Technical Information of China (English)

JamesHartley

2003-01-01

If we examine the text of scientific articles it is clear that there is a generally accepted way of writing them. Scientific prose in English stereotypically uses the third person, the passive tense, complex terminology, and various footnoting and referencing systems. Scientific prose is not known for discursive anecdotes, humour, pictures, colour, bizarre typography or exclamation marks! Often the written text appears quite impersonal-the human element is removed.

Poster Development and Presentation to Improve Scientific Inquiry and Broaden Effective Scientific Communication Skills.

Science.gov (United States)

Rauschenbach, Ines; Keddis, Ramaydalis; Davis, Diane

2018-01-01

We have redesigned a tried-and-true laboratory exercise into an inquiry-based team activity exploring microbial growth control, and implemented this activity as the basis for preparing a scientific poster in a large, multi-section laboratory course. Spanning most of the semester, this project culminates in a poster presentation of data generated from a student-designed experiment. Students use and apply the scientific method and improve written and verbal communication skills. The guided inquiry format of this exercise provides the opportunity for student collaboration through cooperative learning. For each learning objective, a percentage score was tabulated (learning objective score = points awarded/total possible points). A score of 80% was our benchmark for achieving each objective. At least 76% of the student groups participating in this project over two semesters achieved each learning goal. Student perceptions of the project were evaluated using a survey. Nearly 90% of participating students felt they had learned a great deal in the areas of formulating a hypothesis, experimental design, and collecting and analyzing data; 72% of students felt this project had improved their scientific writing skills. In a separate survey, 84% of students who responded felt that peer review was valuable in improving their final poster submission. We designed this inquiry-based poster project to improve student scientific communication skills. This exercise is appropriate for any microbiology laboratory course whose learning outcomes include the development of scientific inquiry and literacy.

Using Scientific Visualizations to Enhance Scientific Thinking In K-12 Geoscience Education

Science.gov (United States)

Robeck, E.

2016-12-01

The same scientific visualizations, animations, and images that are powerful tools for geoscientists can serve an important role in K-12 geoscience education by encouraging students to communicate in ways that help them develop habits of thought that are similar to those used by scientists. Resources such as those created by NASA's Scientific Visualization Studio (SVS), which are intended to inform researchers and the public about NASA missions, can be used in classrooms to promote thoughtful, engaged learning. Instructional materials that make use of those visualizations have been developed and are being used in K-12 classrooms in ways that demonstrate the vitality of the geosciences. For example, the Center for Geoscience and Society at the American Geosciences Institute (AGI) helped to develop a publication that outlines an inquiry-based approach to introducing students to the interpretation of scientific visualizations, even when they have had little to no prior experience with such media. To facilitate these uses, the SVS team worked with Center staff and others to adapt the visualizations, primarily by removing most of the labels and annotations. Engaging with these visually compelling resources serves as an invitation for students to ask questions, interpret data, draw conclusions, and make use of other processes that are key components of scientific thought. This presentation will share specific resources for K-12 teaching (all of which are available online, from NASA, and/or from AGI), as well as the instructional principles that they incorporate.

Human-scientific Planning Theory

OpenAIRE

Hagen, Aksel

1998-01-01

This working report is a paper written to XII AESOP Congress 22 – 25 July 1998, Aveiro, Portugal. It is a presentation of human-scientific action theory and its linkage to planning, both planning theory and planning practice. Human-scientific action theory is created by professor Gunnar Olsson and professor José Luis Ramírez, Nordic School of Planning, Stockholm. Planning is primarily a practical and reflective activity. The notion ”Planning” may, therefore, describe the activi...

CORRELATION BETWEEN INTELLECTUAL PROPERTY AND SCIENTIFIC ACTIVITY

Directory of Open Access Journals (Sweden)

Nataliia Shust

2017-07-01

Full Text Available Purpose: The article is dedicated to the analysis of legal nature and peculiarities of optimal correlation between the notions of intellectual property and scientific activity. Nowadays intellectual property as institution goes through the period of establishment in Ukraine. As the Soviet system of civil law was based on recognition and regulation of authors’ rights for the authors of scientific works, discoveries, inventions and innovation proposals as the ones having mainly relative, i.e. legally mandatory, but not absolute character.  Getting started to define the notion of intellectual property and intellectual property right in the system of interaction with scientific activity, it is important to say that such notion as “intellectual property” still needs enhancement. Its imperfection is due to the fact that this kind of property implies being formed by intellectual efforts of the author of scientific work, but legally it is processed with the help of documents that guarantee property right. Methods. General scientific method, philosophical method, specially-legal method of scientific research, system analysis method. Results: It is important to emphasize that not every result of scientific or creative work can become the object of intellectual property right, but the one that corresponds with law. Any scientific work falls within the purview of law if it corresponds with law demands. Scientific and technical results obtain legal protection only in case of appropriate qualification established by specific agency of State administration and issuement of law-enforcement document being limited by the territory of Ukraine. Protection of rights on the territory of other countries is realized only on the basis of correspondent international conventions and treaties. Discussion: Advanced modern countries realized the meaning and importance of usage and proper protection of creative and scientific work results known as �

Scientific Research: How Many Paradigms?

Science.gov (United States)

Strawn, George O.

2012-01-01

As Yogi Berra said, "Predictions are hard, especially about the future." In this article, the author offers a few forward-looking observations about the emerging impact of information technology on scientific research. Scientific research refers to a particular method for acquiring knowledge about natural phenomena. This method has two dimensions:…

Scientific Jargon, Good and Bad

Science.gov (United States)

Hirst, Russel

2003-01-01

Scientific and technical jargon--specialized vocabulary, usually Latinate--plays a vital role in scientific and technical communication. But its proper use continues to be a point of discussion because of our concern with audience adaptation, rhetorical exigence, rhetorical purpose, and ethics. We've focused on teaching students--and on convincing…

Scientific Representation and Science Learning

Science.gov (United States)

Matta, Corrado

2014-01-01

In this article I examine three examples of philosophical theories of scientific representation with the aim of assessing which of these is a good candidate for a philosophical theory of scientific representation in science learning. The three candidate theories are Giere's intentional approach, Suárez's inferential approach and Lynch and…

Reading, Writing, and Presenting Original Scientific Research: A Nine-Week Course in Scientific Communication for High School Students†

Science.gov (United States)

Danka, Elizabeth S.; Malpede, Brian M.

2015-01-01

High school students are not often given opportunities to communicate scientific findings to their peers, the general public, and/or people in the scientific community, and therefore they do not develop scientific communication skills. We present a nine-week course that can be used to teach high school students, who may have no previous experience, how to read and write primary scientific articles and how to discuss scientific findings with a broad audience. Various forms of this course have been taught for the past 10 years as part of an intensive summer research program for rising high school seniors that is coordinated by the Young Scientist Program at Washington University in St. Louis. The format presented here includes assessments for efficacy through both rubric-based methods and student self-assessment surveys. PMID:26753027

Brazilian law for scientific use of animals.

Science.gov (United States)

Marques, Ruy Garcia; Morales, Marcelo Marcos; Petroianu, Andy

2009-01-01

The Brazilian scientific community claimed for a definitive systematization and for comprehensive and realistic national rules, to provide guidance and regulation, instead of sanctions, so that the question of scientific research involving animals could be better contemplated. This is beginning to occur now with Law no. 11.794, sanctioned by the President of the Republic on November 8, 2008. To describe the evolution of Brazilian regimentation for scientific use of animals and to analyze Law no. 11.794. The legislation about the use of animals in teaching and in scientific research in Brazil and in Rio de Janeiro State was identified and discussed. Until now, there was no updated general and systematizing rule regarding animal vivisection and experimentation for didactic or scientific purposes. The only specific law dates back to 1979 and was not regimented. More recent laws equated the practice of scientific experiments to acts of abuse and mistreatment of animals, when alternative technology was available. Municipal laws that restricted the scientific practice of vivisection and experimentation with animals were created in the cities of Rio de Janeiro and Florianopolis. With the claim and collaboration of the scientific community, the sanction of Law no. 11.794 regarding the scientific use of animals represented an invaluable advance in spite of the presence of some points that eventually may require another type of treatment. The new Law states that it will be regimented within 180 (one-hundred-and-eighty) days, when some of these points could be better elucidated.

Clustering of scientific citations in Wikipedia

DEFF Research Database (Denmark)

Nielsen, Finn Årup

The instances of templates in Wikipedia form an interesting data set of structured information. Here I focus on the cite journal template that is primarily used for citation to articles in scientific journals. These citations can be extracted and analyzed: Non-negative matrix factorization...... is performed on a (article x journal) matrix resulting in a soft clustering of Wikipedia articles and scientific journals, each cluster more or less representing a scientific topic....

Professional scientific blog

Directory of Open Access Journals (Sweden)

Tamás Beke

2009-03-01

Full Text Available The professional blog is a weblog that on the whole meets the requirements of scientific publication. In my opinion it bear a resemblance to digital notice board, where the competent specialists of the given branch of science can place their ideas, questions, possible solutions and can raise problems. Its most important function can be collectivization of the knowledge. In this article I am going to examine the characteristics of the scientific blog as a genre. Conventional learning counts as a rather solitary activity. If the students have access to the materials of each other and of the teacher, their sense of solitude diminishes and this model is also closer to the constructivist approach that features the way most people think and learn. Learning does not mean passively collecting tiny pieces of knowledge; it much more esembles ‘spinning a conceptual net’ which is made up by the experiences and observations of the individual. With the spreading of the Internet more universities and colleges worldwide gave a try to on-line educational methods, but the most efficient one has not been found yet. The publication of the curriculum (the material of the lectures and the handling of the electronic mails are not sufficient; much more is needed for collaborative learning. Our scholastic scientific blog can be a sufficient field for the start of a knowledge-building process based on cooperation. In the Rocard-report can be read that for the future of Europe it is crucial to develop the education of the natural sciences, and for this it isnecessary to act on local, regional, national and EU-level. To the educational processes should be involved beyond the traditional actors (child, parent, teacher also others (scientists, professionals, universities, local institutions, the actors of the economic sphere, etc.. The scholastic scientific blog answer the purposes, as a collaborative knowledge-sharing forum.

Scientific report 1998

International Nuclear Information System (INIS)

1998-01-01

The aim of this report is to outline the main developments of the ''Departement des Reacteurs Nucleaires'', (DRN) during the year 1998. DRN is one of the CEA Institution. This report is divided in three main parts: the DRN scientific programs, the scientific and technical publications (with abstracts in english) and economic data on staff, budget and communication. Main results of the Department, for the year 1998, are presented giving information on the reactors technology and safety, the neutronics, the transmutation and the hybrid systems, the dismantling and the sites improvement, the nuclear accidents, the nuclear matter transport, the thermonuclear fusion safety, the fuel cladding materials and radioactive waste control. (A.L.B.)

Shaping a Scientific Self

DEFF Research Database (Denmark)

Andrade-Molina, Melissa; Valero, Paola

us to understand how a truth is reproduced, circulating among diverse fields of human knowledge. Also it will show why we accept and reproduce a particular discourse. Finally, we state Euclidean geometry as a truth that circulates in scientific discourse and performs a scientific self. We unfold...... the importance of having students following the path of what schools perceive a real scientist is, no to become a scientist, but to become a logical thinker, a problem solver, a productive citizen who uses reason....

50 CFR 21.23 - Scientific collecting permits.

Science.gov (United States)

2010-10-01

... take, transport, or possess migratory birds, their parts, nests, or eggs for scientific research or... project involved; (4) Name and address of the public, scientific, or educational institution to which all... possessed under authority of a scientific collecting permit must be donated and transferred to the public...

The Crossroads between Biology and Mathematics: The Scientific Method as the Basics of Scientific Literacy

Science.gov (United States)

Karsai, Istvan; Kampis, George

2010-01-01

Biology is changing and becoming more quantitative. Research is creating new challenges that need to be addressed in education as well. New educational initiatives focus on combining laboratory procedures with mathematical skills, yet it seems that most curricula center on a single relationship between scientific knowledge and scientific method:…

Scientific Research: Commodities or Commons?

Science.gov (United States)

Vermeir, Koen

2013-01-01

Truth is for sale today, some critics claim. The increased commodification of science corrupts it, scientific fraud is rampant and the age-old trust in science is shattered. This cynical view, although gaining in prominence, does not explain very well the surprising motivation and integrity that is still central to the scientific life. Although…

Organized Oscillations of Initially-Turbulent Flow Past a Cavity

Energy Technology Data Exchange (ETDEWEB)

J.C. Lin; D. Rockwell

2002-09-17

Flow past an open cavity is known to give rise to self-sustained oscillations in a wide variety of configurations, including slotted-wall, wind and water tunnels, slotted flumes, bellows-type pipe geometries, high-head gates and gate slots, aircraft components and internal piping systems. These cavity-type oscillations are the origin of coherent and broadband sources of noise and, if the structure is sufficiently flexible, flow-induced vibration as well. Moreover, depending upon the state of the cavity oscillation, substantial alterations of the mean drag may be induced. In the following, the state of knowledge of flow past cavities, based primarily on laminar inflow conditions, is described within a framework based on the flow physics. Then, the major unresolved issues for this class of flows will be delineated. Self-excited cavity oscillations have generic features, which are assessed in detail in the reviews of Rockwell and Naudascher, Rockwell, Howe and Rockwell. These features, which are illustrated in the schematic of Figure 1, are: (i) interaction of a vorticity concentration(s) with the downstream corner, (ii) upstream influence from this corner interaction to the sensitive region of the shear layer formed from the upstream corner of the cavity; (iii) conversion of the upstream influence arriving at this location to a fluctuation in the separating shear layer; and (iv) amplification of this fluctuation in the shear layer as it develops in the streamwise direction. In view of the fact that inflow shear-layer in the present investigation is fully turbulent, item (iv) is of particular interest. It is generally recognized, at least for laminar conditions at separation from the leading-corner of the cavity, that the disturbance growth in the shear layer can be described using concepts of linearized, inviscid stability theory, as shown by Rockwell, Sarohia, and Knisely and Rockwell. As demonstrated by Knisely and Rockwell, on the basis of experiments interpreted

NASA's Scientific Visualization Studio

Science.gov (United States)

Mitchell, Horace G.

2003-01-01

Since 1988, the Scientific Visualization Studio(SVS) at NASA Goddard Space Flight Center has produced scientific visualizations of NASA s scientific research and remote sensing data for public outreach. These visualizations take the form of images, animations, and end-to-end systems and have been used in many venues: from the network news to science programs such as NOVA, from museum exhibits at the Smithsonian to White House briefings. This presentation will give an overview of the major activities and accomplishments of the SVS, and some of the most interesting projects and systems developed at the SVS will be described. Particular emphasis will be given to the practices and procedures by which the SVS creates visualizations, from the hardware and software used to the structures and collaborations by which products are designed, developed, and delivered to customers. The web-based archival and delivery system for SVS visualizations at svs.gsfc.nasa.gov will also be described.

Scientific Assistant Virtual Laboratory (SAVL)

Science.gov (United States)

Alaghband, Gita; Fardi, Hamid; Gnabasik, David

2007-03-01

The Scientific Assistant Virtual Laboratory (SAVL) is a scientific discovery environment, an interactive simulated virtual laboratory, for learning physics and mathematics. The purpose of this computer-assisted intervention is to improve middle and high school student interest, insight and scores in physics and mathematics. SAVL develops scientific and mathematical imagination in a visual, symbolic, and experimental simulation environment. It directly addresses the issues of scientific and technological competency by providing critical thinking training through integrated modules. This on-going research provides a virtual laboratory environment in which the student directs the building of the experiment rather than observing a packaged simulation. SAVL: * Engages the persistent interest of young minds in physics and math by visually linking simulation objects and events with mathematical relations. * Teaches integrated concepts by the hands-on exploration and focused visualization of classic physics experiments within software. * Systematically and uniformly assesses and scores students by their ability to answer their own questions within the context of a Master Question Network. We will demonstrate how the Master Question Network uses polymorphic interfaces and C# lambda expressions to manage simulation objects.

Scientific knowledge and modern prospecting

Science.gov (United States)

Neuerburg, G.J.

1985-01-01

Modern prospecting is the systematic search for specified and generally ill-exposed components of the Earth's crust known as ore. This prospecting depends entirely on reliable, or scientific knowledge for guidance and for recognition of the search objects. Improvement in prospecting results from additions and refinements to scientific knowledge. Scientific knowledge is an ordered distillation of observations too numerous and too complex in themselves for easy understanding and for effective management. The ordering of these observations is accomplished by an evolutionary hierarchy of abstractions. These abstractions employ simplified descriptions consisting of characterization by selected properties, sampling to represent much larger parts of a phenomenon, generalized mappings of patterns of geometrical and numerical relations among properties, and explanation (theory) of these patterns as functional relations among the selected properties. Each abstraction is predicated on the mode of abstraction anticipated for the next higher level, so that research is a deductive process in which the highest level, theory, is indispensible for the growth and refinement of scientific knowledge, and therefore of prospecting methodology. ?? 1985 Springer-Verlag.

Mapping the evolution of scientific ideas

Energy Technology Data Exchange (ETDEWEB)

Roberts, David C [Los Alamos National Laboratory; Herrera, Mark [UNIV OF MARYLAND; Gulbahce, Natali [NORTHEASTERN UNIV

2008-01-01

The importance of interdisciplinary research is ever increasing as challenging world problems require expertise across diverse fields. Despite the apparent conceptual boundaries of scientific fields, a formal description for their evolution is lacking. Here we describe a novel approach to study the dynamics and evolution of scientific ideas and fields using a network-based analysis. We build a idea network consisting of American Physical Society Pacs numbers as nodes representing scientific concepts. Two Pacs numbers are linked in the network if there exist publications that reference them simultaneously. We locate scientific fields using an overlapping community finding algorithm and describe the time evolution of these fields using a community evolution method over the course of 1985-2006. We find that the communities we find map to scientific fields, the lifetime of these fields strongly depends on their size, impact and activity, and longest living communities are least volatile. The described approach to quantify the evolution of ideas is expected to be relevant in making predictions about the future of science and how to guide its development.

Introduction to scientific publishing backgrounds, concepts, strategies

CERN Document Server

Öchsner, Andreas

2013-01-01

This book is a very concise introduction to the basic knowledge of scientific publishing. It  starts with the basics of writing a scientific paper, and recalls the different types of scientific documents. In gives an overview on the major scientific publishing companies and different business models. The book also introduces to abstracting and indexing services and how they can be used for the evaluation of science, scientists, and institutions. Last but not least, this short book faces the problem of plagiarism and publication ethics.

Artificial intelligence support for scientific model-building

Science.gov (United States)

Keller, Richard M.

1992-01-01

Scientific model-building can be a time-intensive and painstaking process, often involving the development of large and complex computer programs. Despite the effort involved, scientific models cannot easily be distributed and shared with other scientists. In general, implemented scientific models are complex, idiosyncratic, and difficult for anyone but the original scientific development team to understand. We believe that artificial intelligence techniques can facilitate both the model-building and model-sharing process. In this paper, we overview our effort to build a scientific modeling software tool that aids the scientist in developing and using models. This tool includes an interactive intelligent graphical interface, a high-level domain specific modeling language, a library of physics equations and experimental datasets, and a suite of data display facilities.

[Scientific medical forum as important source of scientific-information provision for innovation processes in the healthcare sector of Ukraine].

Science.gov (United States)

Horban', A Ie; Zakrut'ko, L I; Uvarenko, S V; Prysiazhniuk, L V

2013-12-01

The article made a retrospective analysis of the scientific medical forums (congresses, symposia and scientific conferences) in the healthcare sector of Ukraine in 2008-2012, planned by higher medical schools and post-graduate medical education schools, scientific institutions of Ministry of Healthcare of Ukraine, National Academy of Medical Science of Ukraine, medical associations and scientific and medical societies. Quantitative and qualitative assessment was carried out of the effectiveness of their implementation, provided suggestions for improving the planning and conducting of medical research forums.

Scientific workflows as productivity tools for drug discovery.

Science.gov (United States)

Shon, John; Ohkawa, Hitomi; Hammer, Juergen

2008-05-01

Large pharmaceutical companies annually invest tens to hundreds of millions of US dollars in research informatics to support their early drug discovery processes. Traditionally, most of these investments are designed to increase the efficiency of drug discovery. The introduction of do-it-yourself scientific workflow platforms has enabled research informatics organizations to shift their efforts toward scientific innovation, ultimately resulting in a possible increase in return on their investments. Unlike the handling of most scientific data and application integration approaches, researchers apply scientific workflows to in silico experimentation and exploration, leading to scientific discoveries that lie beyond automation and integration. This review highlights some key requirements for scientific workflow environments in the pharmaceutical industry that are necessary for increasing research productivity. Examples of the application of scientific workflows in research and a summary of recent platform advances are also provided.

Scientific Communication and the Nature of Science

Science.gov (United States)

Nielsen, Kristian H.

2013-01-01

Communication is an important part of scientific practice and, arguably, may be seen as constitutive to scientific knowledge. Yet, often scientific communication gets cursory treatment in science studies as well as in science education. In Nature of Science (NOS), for example, communication is rarely mentioned explicitly, even though, as will be…

Testing Scientific Software: A Systematic Literature Review

Science.gov (United States)

Kanewala, Upulee; Bieman, James M.

2014-01-01

Context Scientific software plays an important role in critical decision making, for example making weather predictions based on climate models, and computation of evidence for research publications. Recently, scientists have had to retract publications due to errors caused by software faults. Systematic testing can identify such faults in code. Objective This study aims to identify specific challenges, proposed solutions, and unsolved problems faced when testing scientific software. Method We conducted a systematic literature survey to identify and analyze relevant literature. We identified 62 studies that provided relevant information about testing scientific software. Results We found that challenges faced when testing scientific software fall into two main categories: (1) testing challenges that occur due to characteristics of scientific software such as oracle problems and (2) testing challenges that occur due to cultural differences between scientists and the software engineering community such as viewing the code and the model that it implements as inseparable entities. In addition, we identified methods to potentially overcome these challenges and their limitations. Finally we describe unsolved challenges and how software engineering researchers and practitioners can help to overcome them. Conclusions Scientific software presents special challenges for testing. Specifically, cultural differences between scientist developers and software engineers, along with the characteristics of the scientific software make testing more difficult. Existing techniques such as code clone detection can help to improve the testing process. Software engineers should consider special challenges posed by scientific software such as oracle problems when developing testing techniques. PMID:25125798

Testing Scientific Software: A Systematic Literature Review.

Science.gov (United States)

Kanewala, Upulee; Bieman, James M

2014-10-01

Scientific software plays an important role in critical decision making, for example making weather predictions based on climate models, and computation of evidence for research publications. Recently, scientists have had to retract publications due to errors caused by software faults. Systematic testing can identify such faults in code. This study aims to identify specific challenges, proposed solutions, and unsolved problems faced when testing scientific software. We conducted a systematic literature survey to identify and analyze relevant literature. We identified 62 studies that provided relevant information about testing scientific software. We found that challenges faced when testing scientific software fall into two main categories: (1) testing challenges that occur due to characteristics of scientific software such as oracle problems and (2) testing challenges that occur due to cultural differences between scientists and the software engineering community such as viewing the code and the model that it implements as inseparable entities. In addition, we identified methods to potentially overcome these challenges and their limitations. Finally we describe unsolved challenges and how software engineering researchers and practitioners can help to overcome them. Scientific software presents special challenges for testing. Specifically, cultural differences between scientist developers and software engineers, along with the characteristics of the scientific software make testing more difficult. Existing techniques such as code clone detection can help to improve the testing process. Software engineers should consider special challenges posed by scientific software such as oracle problems when developing testing techniques.

The ESO Scientific and Technical Committee.

Science.gov (United States)

Léna, P.

1982-03-01

Since 1978, the structure of ESO involves a Scientific and Technical Committee (STC) which advises the Council on scientific and technical matters. This committee meets twice a year, usually at Garehing; its members are nominated by the Council and their term is 4 years. The STC has 10 members, who are as evenly distributed as possible among member countries, although indeed mainly chosen for their scientific abilities. The chairman is invited to attend Council meetings and to report to the members.

Defending the scientific integrity of conservation-policy processes.

Science.gov (United States)

Carroll, Carlos; Hartl, Brett; Goldman, Gretchen T; Rohlf, Daniel J; Treves, Adrian; Kerr, Jeremy T; Ritchie, Euan G; Kingsford, Richard T; Gibbs, Katherine E; Maron, Martine; Watson, James E M

2017-10-01

Government agencies faced with politically controversial decisions often discount or ignore scientific information, whether from agency staff or nongovernmental scientists. Recent developments in scientific integrity (the ability to perform, use, communicate, and publish science free from censorship or political interference) in Canada, Australia, and the United States demonstrate a similar trajectory. A perceived increase in scientific-integrity abuses provokes concerted pressure by the scientific community, leading to efforts to improve scientific-integrity protections under a new administration. However, protections are often inconsistently applied and are at risk of reversal under administrations publicly hostile to evidence-based policy. We compared recent challenges to scientific integrity to determine what aspects of scientific input into conservation policy are most at risk of political distortion and what can be done to strengthen safeguards against such abuses. To ensure the integrity of outbound communications from government scientists to the public, we suggest governments strengthen scientific integrity policies, include scientists' right to speak freely in collective-bargaining agreements, guarantee public access to scientific information, and strengthen agency culture supporting scientific integrity. To ensure the transparency and integrity with which information from nongovernmental scientists (e.g., submitted comments or formal policy reviews) informs the policy process, we suggest governments broaden the scope of independent reviews, ensure greater diversity of expert input and transparency regarding conflicts of interest, require a substantive response to input from agencies, and engage proactively with scientific societies. For their part, scientists and scientific societies have a responsibility to engage with the public to affirm that science is a crucial resource for developing evidence-based policy and regulations in the public interest. �

[Academician Li Lianda talking about doctors doing scientific research].

Science.gov (United States)

He, Ping; Li, Yi-kui

2015-09-01

At present, Chinese medical field faces with an important problem of how to correctly handle the relationship between medical and scientific research. Academician Li Lianda advocates doctors doing scientific research under the premise of putting the medical work first. He points out that there are many problems in the process of doctors doing scientific research at present such as paying more attention to scientific research than medical care, excessively promoting building scientific research hospital, only paying attention to training scientific talents, research direction be flashy without substance, the medical evaluation system should be improved and so on. Medical, scientific research and teaching are inseparable because improving medical standards depends on scientific research and personnel training. But not all doctors need to take into account of medical treatment, scientific research and teaching in the same degree while not all hospitals need to turn into three-in-one hospital, scientific research hospital or teaching hospital. It must be treated differently according to the actual situation.

Motivating Scientific Research and Development: | Ononogbu | Bio ...

African Journals Online (AJOL)

Scientific research is an important aspect of the function of a university lecturer. It is how he/she carries out this function that determines his/her relevance in the university system and indeed in the scientific community as a whole. Scientific research or investigation may be divided into four sections: mental exercise, ...

Support Science by Publishing in Scientific Society Journals.

Science.gov (United States)

Schloss, Patrick D; Johnston, Mark; Casadevall, Arturo

2017-09-26

Scientific societies provide numerous services to the scientific enterprise, including convening meetings, publishing journals, developing scientific programs, advocating for science, promoting education, providing cohesion and direction for the discipline, and more. For most scientific societies, publishing provides revenues that support these important activities. In recent decades, the proportion of papers on microbiology published in scientific society journals has declined. This is largely due to two competing pressures: authors' drive to publish in "glam journals"-those with high journal impact factors-and the availability of "mega journals," which offer speedy publication of articles regardless of their potential impact. The decline in submissions to scientific society journals and the lack of enthusiasm on the part of many scientists to publish in them should be matters of serious concern to all scientists because they impact the service that scientific societies can provide to their members and to science. Copyright © 2017 Schloss et al.

Catalog of borehole lithologic logs from the 600 Area, Hanford Site

International Nuclear Information System (INIS)

Fecht, K.R.; Lillie, J.T.

1982-03-01

Rockwell Hanford Operations (Rockwell) geoscientists are studying the Hanford Site subsurface environment to assure safe management operations, disposal, and storage of radioactive waste. As part of this effort, geoscientists have collected geotechnical data from about 3000 boreholes drilled on the Hanford Site since the early 1900s. These boreholes have been used for subsurface geologic, hydrologic, and engineering investigation, water supply, ground-water monitoring, and natural gas production. This report is a catalog of all obtainable (about 800) lithologic logs from boreholes in a portion of the Hanford Site known as the 600 Area

Hardware interface unit for control of shuttle RMS vibrations

Science.gov (United States)

Lindsay, Thomas S.; Hansen, Joseph M.; Manouchehri, Davoud; Forouhar, Kamran

1994-01-01

Vibration of the Shuttle Remote Manipulator System (RMS) increases the time for task completion and reduces task safety for manipulator-assisted operations. If the dynamics of the manipulator and the payload can be physically isolated, performance should improve. Rockwell has developed a self contained hardware unit which interfaces between a manipulator arm and payload. The End Point Control Unit (EPCU) is built and is being tested at Rockwell and at the Langley/Marshall Coupled, Multibody Spacecraft Control Research Facility in NASA's Marshall Space Flight Center in Huntsville, Alabama.

Hydrologic bibliography of the Columbia River basalts in Washington

International Nuclear Information System (INIS)

Tanaka, H.H.; Wildrick, L.

1978-07-01

This bibliography is part of the hydrologic data compilation effort of the Columbia Plateau Hydrology Study, Rockwell Hanford Operations' Waste Isolation Program. It includes references on both surface and subsurface hydrology directly or indirectly related to the Washington State portion of the Columbia River basalts. A comprehensive, annotated bibliography of the Pasco Basin (including the Hanford site) hydrology has been prepared for Rockwell Hanford Operations under the Pasco Basin Hydrology Study. In order to avoid unnecessary duplication, no effort was made to include a complete list of bibliographic references on Hanford in this volume

Popularization of science and scientific journalism: possibilities of scientific literacy

Directory of Open Access Journals (Sweden)

Alessandro Augusto Barros Façanha

2017-07-01

Full Text Available This study evidences the intersection between science education and communication in the perspective of the popularization of sciences based on the evidence produced in a specific column of a large circulation newspaper of the city of Teresina / PI. The discussions were based on the analysis of content carried out in the context of science classes in a school of basic education with elementary students, where journalistic texts were used with diverse themes that involved science and daily life in order to understand the interpretation of texts And the relationship with the context of scientific dissemination and citizenship. The analysis of the content was used and the answers were stratified into categories of conceptual nature and application of the themes. The analyses show that the texts of scientific dissemination have a contribution in relation to the popularization of Sciences, fomentation to the debate in the classroom, didactic increment in the classes of sciences, in spite of their insertion still incipient in the context of science education. However, the results of the research denote the difficulty faced by the students in understanding the text of dissemination in their conceptual comprehension and resolution of daily problems, as well as the distance between the context of the sciences in their theoretical scope and their presentation in everyday situations, Despite this, the texts of divulgation corroborated as an important way of real insertion in the process of scientific literacy and promotion of citizenship.

CREATE Cornerstone: Introduction to Scientific Thinking, a New Course for STEM-Interested Freshmen, Demystifies Scientific Thinking through Analysis of Scientific Literature

Science.gov (United States)

Gottesman, Alan J.; Hoskins, Sally G.

2013-01-01

The Consider, Read, Elucidate hypotheses, Analyze and interpret data, Think of the next Experiment (CREATE) strategy for teaching and learning uses intensive analysis of primary literature to improve students’ critical-thinking and content integration abilities, as well as their self-rated science attitudes, understanding, and confidence. CREATE also supports maturation of undergraduates’ epistemological beliefs about science. This approach, originally tested with upper-level students, has been adapted in Introduction to Scientific Thinking, a new course for freshmen. Results from this course's initial semesters indicate that freshmen in a one-semester introductory course that uses a narrowly focused set of readings to promote development of analytical skills made significant gains in critical-thinking and experimental design abilities. Students also reported significant gains in their ability to think scientifically and understand primary literature. Their perceptions and understanding of science improved, and multiple aspects of their epistemological beliefs about science gained sophistication. The course has no laboratory component, is relatively inexpensive to run, and could be adapted to any area of scientific study. PMID:23463229

Cyber warfare building the scientific foundation

CERN Document Server

Jajodia, Sushil; Subrahmanian, VS; Swarup, Vipin; Wang, Cliff

2015-01-01

This book features a wide spectrum of the latest computer science research relating to cyber warfare, including military and policy dimensions. It is the first book to explore the scientific foundation of cyber warfare and features research from the areas of artificial intelligence, game theory, programming languages, graph theory and more. The high-level approach and emphasis on scientific rigor provides insights on ways to improve cyber warfare defense worldwide. Cyber Warfare: Building the Scientific Foundation targets researchers and practitioners working in cyber security, especially gove

Biomedical Scientific and Professional Social Networks in the Service of the Development of Modern Scientific Publishing.

Science.gov (United States)

Masic, Izet; Begic, Edin

2016-12-01

Information technologies have found their application in virtually every branch of health care. In recent years they have demonstrated their potential in the development of online library, where scientists and researchers can share their latest findings. Academia.edu, ResearchGate, Mendeley, Kudos, with the support of platform GoogleScholar, have indeed increased the visibility of scientific work of one author, and enable a much greater availability of the scientific work to the broader audience. Online libraries have allowed free access to the scientific content to the countries that could not follow the economic costs of getting access to certain scientific bases. Especially great benefit occurred in countries in transition and developing countries. Online libraries have great potential in terms of expanding knowledge, but they also present a major problem for many publishers, because their rights can be violated, which are signed by the author when publishing the paper. In the future it will lead to a major conflict of the author, the editorial board and online database, about the right to scientific content This question certainly represents one of the most pressing issues of publishing, whose future in printed form is already in the past, and the future of the online editions will be a problem of large-scale.

In Search of Scientific Inspiration.

Science.gov (United States)

2017-01-12

In the ever-expanding sea of scientific advances, how do you find inspiration for your own study? Cell editor Jiaying Tan talked with Mark Lemmon and Joseph (Yossi) Schlessinger about the importance of fueling your research creativity with the conceptual excitement and technical advance from the broad scientific field. An excerpt of the conversation appears below. Copyright © 2017. Published by Elsevier Inc.

Scientific publications 1973-1974

International Nuclear Information System (INIS)

1976-01-01

This catalogue supplements the HMI report 'Scientific publications 1958-1972' (HMI-B-142). It lists all the publications by the Hahn-Meitner-Institut fuer Kernforschung Berlin of the years 1973-1974. The catalogue contains progress reports, dissertations, publications from scientific journals and anthologies if these are available in print. The titles listed in this catalogue are based on the HMI's annual reports. The classification according to fields and departments follows the development of the institute as outlined in the annual reports. Further classification is done according to the year of publication. (orig./HK) [de

IR detectors for the Infrared Atmospheric Sounding Interferometer (IASI) instrument payload for the METOP-1 ESA polar platform

Science.gov (United States)

Royer, Michel; Lorans, Dominique; Bischoff, Isabelle; Giotta, Dominique; Wolny, Michel

1994-12-01

IASI is an Infrared Atmospheric Sounding Interferometer devoted to the operational meteorology and to atmospheric studies and is to be installed on board the second ESA Polar Platform called METOP-1, planned to be launched in the year 2000. The main purpose of this high performance instrument is to record temperature and humidity profiles. The required lifetime is 4 years. This paper presents the characteristics of the LW IR detection arrays for the IASI spectrometer which consist of HgCdTe de- tectors. SAT has to develop the Engineering Model, Qualification Model and Fight Models of detectors, each having 4 pixels and AR-coated microlenses in a dedicated space housing equipped with a flexible line and a connector. An array is composed of HgCdTe photoconductive detectors. For this long wavelength the array is sensitive from 8.26 micrometers to 15.5 micrometers . The detectors, with sensitive areas of 900 x 900 micrometers 2, are 100 K operating with passive cooling. High quality HgCdTe material is a key feature for the manufacturing of high performance photoconductive detectors. Therefore epitaxial HgCdTe layers are used in this project. These epilayers are grown at CEA/LETI on lattice matched CdZnTe substrates, by Te-rich liquid phase epitaxy, based on a slider technique. The Cd content in the layer is carefully adjusted to meet the required cut off wavelength on the devices. After growth of the epilayers, the samples are annealed under Hg pressure in order to convert them into N type mate- rials. The electrical transport properties of the liquid phase epitaxied wafers are, at 100 K, mobility (mu) over 150,000 cm2/V.s and electrical concentration N of 1.5 1015 cm-3, the residual doping level being 1014 cm-3 at low temperature. On these materials the feasibility study of long wavelength HgCdTe photoconductors has been achieved with the following results: the responsivity is 330 V/W. The bias voltage is Vp=300 mV for a 4 mW limitation of power for each element. The

Poster Development and Presentation to Improve Scientific Inquiry and Broaden Effective Scientific Communication Skills †

Science.gov (United States)

Rauschenbach, Ines; Keddis, Ramaydalis; Davis, Diane

2018-01-01

We have redesigned a tried-and-true laboratory exercise into an inquiry-based team activity exploring microbial growth control, and implemented this activity as the basis for preparing a scientific poster in a large, multi-section laboratory course. Spanning most of the semester, this project culminates in a poster presentation of data generated from a student-designed experiment. Students use and apply the scientific method and improve written and verbal communication skills. The guided inquiry format of this exercise provides the opportunity for student collaboration through cooperative learning. For each learning objective, a percentage score was tabulated (learning objective score = points awarded/total possible points). A score of 80% was our benchmark for achieving each objective. At least 76% of the student groups participating in this project over two semesters achieved each learning goal. Student perceptions of the project were evaluated using a survey. Nearly 90% of participating students felt they had learned a great deal in the areas of formulating a hypothesis, experimental design, and collecting and analyzing data; 72% of students felt this project had improved their scientific writing skills. In a separate survey, 84% of students who responded felt that peer review was valuable in improving their final poster submission. We designed this inquiry-based poster project to improve student scientific communication skills. This exercise is appropriate for any microbiology laboratory course whose learning outcomes include the development of scientific inquiry and literacy. PMID:29904518

Salton Sea Scientific Drilling Project: A summary of drilling and engineering activities and scientific results

Energy Technology Data Exchange (ETDEWEB)

Ross, H.P.; Forsgren, C.K. (eds.)

1992-04-01

The Salton Sea Scientific g Project (SSSDP) completed the first major well in the United States Continental Scientific Drilling Program. The well (State 2-14) was drilled to 10,W ft (3,220 m) in the Salton Sea Geothermal Field in California's Imperial Valley, to permit scientific study of a deep, high-temperature portion of an active geothermal system. The program was designed to investigate, through drilling and testing, the subsurface thermal, chemical, and mineralogical environments of this geothermal area. Extensive samples and data, including cores, cuttings, geothermal fluids and gases, and geophysical logs, were collected for future scientific analysis, interpretation, and publication. Short duration flow tests were conducted on reservoirs at a depth of approximately 6,120 ft (1,865 m) and at 10,136 ft (3,089 m). This report summarizes all major activities of the SSSDP, from project inception in the fall of 1984 through brine-pond cleanup and site restoration, ending in February 1989. This report presents a balanced summary of drilling, coring, logging, and flow-test operations, and a brief summary of technical and scientific results. Frequent reference is made to original records, data, and publication of results. The report also reviews the proposed versus the final well design, and operational summaries, such as the bit record, the casing and cementing program, and the coring program. Summaries are and the results of three flow tests. Several teamed during the project.

Enhancing Eight Grade Students' Scientific Conceptual Change and Scientific Reasoning through a Web-Based Learning Program

Science.gov (United States)

Liao, Ya-Wen; She, Hsiao-Ching

2009-01-01

This study reports the impacts of the Scientific Concept Construction and Reconstruction (SCCR) digital learning system on eighth grade students' concept construction, conceptual change, and scientific reasoning involving the topic of "atoms". A two-factorial experimental design was carried out to investigate the effects of the approach…

Toward fostering the scientific and technological literacy establishment of the 'Central Scientific and Technological Museum-Institute' and nuclear development

International Nuclear Information System (INIS)

Murata, Takashi

1999-01-01

The public in general does not necessarily have enough knowledge for the reasonable decision making in the application of scientific and technological development even in the ear of the Information Society. However strongly the necessity of the consensus in the scientific policy like nuclear R and D is required, it is impossible to attain the goal, unless the scientific literacy of the general public is. In order to improve it the role of the scientific museum as a social educational facility is very important. In this respect, there still remains vast room to improve in the Japanese museum system and its activities. The concept of the 'Central Scientific and Technological Museum-Institute', which also operates very small-sized reactor for the educational use, is developed in this paper. (author)

Mapping the evolution of scientific ideas

Energy Technology Data Exchange (ETDEWEB)

Roberts, David [Los Alamos National Laboratory; Herrera, Mark [UNIV OF MARYLAND; Gulbahce, Natali [UNIV OF BOSTON

2009-01-01

Despite the apparent conceptual boundaries of scientific fields, a formal description for their evolution is lacking. Here we describe a novel approach to study the dynamics and evolution of scientific fields using a network-based analysis. We build an idea network consisting of American Physical Society PACS numbers as nodes representing scientific concepts. Two PACS numbers are linked if there exist publications that reference them simultaneously. We locate scientific fields using Cfinder, an overlapping community finding algorithm, and describe the time evolution of these fields using a community evolution method over the course of 1985-2006. The communities we identify map to known scientific fields, and their age strongly depends on t.heir size, impact and activity. Our analysis further suggests that communities that redefine themselves by merging and creating new groups of ideas tend to have more fitness as measured by the impact per paper, and hence communities with a higher fitness tend to be short-lived. The described approach to quantify the evolution of ideas may be relevant in making predictions about the future of science and how to guide its development.

Two-Dimensional Theory of Scientific Representation

Directory of Open Access Journals (Sweden)

A Yaghmaie

2013-03-01

Full Text Available Scientific representation is an interesting topic for philosophers of science, many of whom have recently explored it from different points of view. There are currently two competing approaches to the issue: cognitive and non-cognitive, and each of them claims its own merits over the other. This article tries to provide a hybrid theory of scientific representation, called Two-Dimensional Theory of Scientific Representation, which has the merits of the two accounts and is free of their shortcomings. To do this, we will argue that although scientific representation needs to use the notion of intentionality, such a notion is defined and realized in a simply structural form contrary to what cognitive approach says about intentionality. After a short introduction, the second part of the paper is devoted to introducing theories of scientific representation briefly. In the third part, the structural accounts of representation will be criticized. The next step is to introduce the two-dimensional theory which involves two key components: fixing and structural fitness. It will be argued that fitness is an objective and non-intentional relation, while fixing is intentional.

Refining Current Scientific Priorities and Identifying New Scientific Gaps in HIV-Related Heart, Lung, Blood, and Sleep Research.

Science.gov (United States)

Twigg, Homer L; Crystal, Ronald; Currier, Judith; Ridker, Paul; Berliner, Nancy; Kiem, Hans-Peter; Rutherford, George; Zou, Shimian; Glynn, Simone; Wong, Renee; Peprah, Emmanuel; Engelgau, Michael; Creazzo, Tony; Colombini-Hatch, Sandra; Caler, Elisabet

2017-09-01

The National Heart, Lung, and Blood Institute (NHLBI) AIDS Program's goal is to provide direction and support for research and training programs in areas of HIV-related heart, lung, blood, and sleep (HLBS) diseases. To better define NHLBI current HIV-related scientific priorities and with the goal of identifying new scientific priorities and gaps in HIV-related HLBS research, a wide group of investigators gathered for a scientific NHLBI HIV Working Group on December 14-15, 2015, in Bethesda, MD. The core objectives of the Working Group included discussions on: (1) HIV-related HLBS comorbidities in the antiretroviral era; (2) HIV cure; (3) HIV prevention; and (4) mechanisms to implement new scientific discoveries in an efficient and timely manner so as to have the most impact on people living with HIV. The 2015 Working Group represented an opportunity for the NHLBI to obtain expert advice on HIV/AIDS scientific priorities and approaches over the next decade.

REEXPORT OF SCIENTIFIC COMPETENCIES IN THE LIGHT OF THE RE-CONSTRUCTION OF A NETWORK OF SCIENTIFIC-RESEARCH BODIES

Directory of Open Access Journals (Sweden)

О. A. Yeremchenko

2016-01-01

Full Text Available One of the primary challengesRussiais currently facing is the need for diversification of the Russian economy and its increase in the share of manufacturing and exported scientific-driven work products. In this light, improving the effectiveness of the scientific-technological complex of the country is becoming increasingly important. The article considers two scalable, developed in parallel, projects for increasing effectiveness of the scientificresearch sector: restructurization of the scientific organizations network and the project for bringing back home 15 thousand Russian scientists reverse immigration. A conclusion is made about the adequacy of a refusal from a large-scale change in the personnel of scientists in circumstances of when the budget for research and development and the number of scientific-research organizations is cut. It is proposed to create comfortable conditions for scientific search for all parties involved in the process of new knowledge creation, both for the scientists returning toRussiaand those that remain working in the country. 

Embedding Scientific Integrity and Ethics into the Scientific Process and Research Data Lifecycle

Science.gov (United States)

Gundersen, L. C.

2016-12-01

Predicting climate change, developing resources sustainably, and mitigating natural hazard risk are complex interdisciplinary challenges in the geosciences that require the integration of data and knowledge from disparate disciplines and scales. This kind of interdisciplinary science can only thrive if scientific communities work together and adhere to common standards of scientific integrity, ethics, data management, curation, and sharing. Science and data without integrity and ethics can erode the very fabric of the scientific enterprise and potentially harm society and the planet. Inaccurate risk analyses of natural hazards can lead to poor choices in construction, insurance, and emergency response. Incorrect assessment of mineral resources can bankrupt a company, destroy a local economy, and contaminate an ecosystem. This paper presents key ethics and integrity questions paired with the major components of the research data life cycle. The questions can be used by the researcher during the scientific process to help ensure the integrity and ethics of their research and adherence to sound data management practice. Questions include considerations for open, collaborative science, which is fundamentally changing the responsibility of scientists regarding data sharing and reproducibility. The publication of primary data, methods, models, software, and workflows must become a norm of science. There are also questions that prompt the scientist to think about the benefit of their work to society; ensuring equity, respect, and fairness in working with others; and always striving for honesty, excellence, and transparency.

Scientific data management challenges, technology and deployment

CERN Document Server

Rotem, Doron

2010-01-01

Dealing with the volume, complexity, and diversity of data currently being generated by scientific experiments and simulations often causes scientists to waste productive time. Scientific Data Management: Challenges, Technology, and Deployment describes cutting-edge technologies and solutions for managing and analyzing vast amounts of data, helping scientists focus on their scientific goals. The book begins with coverage of efficient storage systems, discussing how to write and read large volumes of data without slowing the simulation, analysis, or visualization processes. It then focuses on the efficient data movement and management of storage spaces and explores emerging database systems for scientific data. The book also addresses how to best organize data for analysis purposes, how to effectively conduct searches over large datasets, how to successfully automate multistep scientific process workflows, and how to automatically collect metadata and lineage information. This book provides a comprehensive u...

[M.S. Gilyarov's Scientific School of Soil Zoology].

Science.gov (United States)

Chesnova, L V

2005-01-01

The role of M.S. Gilyarov's scientific school in the development of the subject and methodology of a new complex discipline formed in the mid-20th century--soil zoology--was considered. The establishment and evolution of the proper scientific school was periodized. The creative continuity and development of the basic laws and technical approaches included in the teacher's scientific program was demonstrated by scientific historical analysis.

Preventing statistical errors in scientific journals.

NARCIS (Netherlands)

Nuijten, M.B.

2016-01-01

There is evidence for a high prevalence of statistical reporting errors in psychology and other scientific fields. These errors display a systematic preference for statistically significant results, distorting the scientific literature. There are several possible causes for this systematic error

Deathcore, creativity, and scientific thinking

Science.gov (United States)

Angeler, David G.; Sundstrom, Shana M.; Allen, Craig R.

2016-01-01

BackgroundMajor scientific breakthroughs are generally the result of materializing creative ideas, the result of an inductive process that sometimes spontaneously and unexpectedly generates a link between thoughts and/or objects that did not exist before. Creativity is the cornerstone of scientific thinking, but scientists in academia are judged by metrics of quantification that often leave little room for creative thinking. In many scientific fields, reductionist approaches are rewarded and new ideas viewed skeptically. As a result, scientific inquiry is often confined to narrow but safe disciplinary ivory towers, effectively preventing profoundly creative explorations that could yield unexpected benefits.New informationThis paper argues how apparently unrelated fields specifically music and belief systems can be combined in a provocative allegory to provide novel perspectives regarding patterns in nature, thereby potentially inspiring innovation in the natural, social and other sciences. The merger between basic human tensions such as those embodied by religion and music, for example the heavy metal genre of deathcore, may be perceived as controversial, challenging, and uncomfortable. However, it is an example of moving the thinking process out of unconsciously established comfort zones, through the connection of apparently unrelated entities. We argue that music, as an auditory art form, has the potential to enlighten and boost creative thinking in science. Metal, as a fast evolving and diversifying extreme form of musical art, may be particularly suitable to trigger surprising associations in scientific inquiry. This may pave the way for dealing with questions about what we don´t know that we don´t know in a fast-changing planet.

Ethical muscle and scientific interests: a role for philosophy in scientific research.

Science.gov (United States)

Kaposy, Chris

2008-03-01

Ethics, a branch of philosophy, has a place in the regulatory framework of human subjects research. Sometimes, however, ethical concepts and arguments play a more central role in scientific activity. This can happen, for example, when violations of research norms are also ethical violations. In such a situation, ethical arguments can be marshaled to improve the quality of the scientific research. I explore two different examples in which philosophers and scientists have used ethical arguments to plead for epistemological improvements in the conduct of research. The first example deals with research dishonesty in pharmaceutical development. The second example is concerned with neuropsychological research using fMRI technology.

International Scientific and Technical Organisations

International Nuclear Information System (INIS)

Nunez-Lagos Rogla, R.

2003-01-01

The nuclear scientific and technical world is well aware of the EURATOM and IAEA activities but usually other international scientific and technical organisations relevant for their ordinary work are unknown. In this article three international organisations are described briefly, the International Union of Pure and Applied Physics (IUPAP). International Union of Pure and Applied chemistry (IUPAC) and the international council of Science (ICSU). (Author)

Scientific text as a special form of communication

OpenAIRE

CHERNYAKOVA NATALIA STEPANOVNA

2016-01-01

It is asserted in the article that scientific text, even being a product of spiritual culture, never ceased to be the main form of an objectivization of scientific thought and the means of special scientific communication.

Open Science: Open source licenses in scientific research

OpenAIRE

Guadamuz, Andres

2006-01-01

The article examines the validity of OSS (open source software) licenses for scientific, as opposed to creative works. It draws on examples of OSS licenses to consider their suitability for the scientific community and scientific research.

Scientific meeting abstracts

International Nuclear Information System (INIS)

1999-01-01

The document is a collection of the scientific meeting abstracts in the fields of nuclear physics, medical sciences, chemistry, agriculture, environment, engineering, different aspects of energy and presents research done in 1999 in these fields

Evaluating Scientific Work by Means of Diffusion

Directory of Open Access Journals (Sweden)

Dan Ophir

2013-10-01

Full Text Available There are two approaches for evaluating scientific papers. The classic way is to choose well established representatives of the specific scientific community and have them evaluate their colleague's work. The other method of evaluation, the so called peer-evaluation method, is where peers (famous or otherwise of the author evaluate the paper. Peer-evaluation resembles the diffusion process in which a new substance spreads out to the whole solution. Similarly the new author and article are diffused among the scientific community, smoothing the level for accepting scientific papers. Using the classic-evaluation system of accepting new papers, the average starting scientists writes their first number of articles as collaborators with a renowned scientist, thus gradually building up their image. Only afterwards do these authors dare to independently publish. What are the pros and cons of both these types of scientific article evaluations?

How to write a good scientific paper

CERN Document Server

Mack, Chris A

2018-01-01

Many scientists and engineers consider themselves poor writers or find the writing process difficult. The good news is that you do not have to be a talented writer to produce a good scientific paper, but you do have to be a careful writer. In particular, writing for a peer-reviewed scientific or engineering journal requires learning and executing a specific formula for presenting scientific work. This book is all about teaching the style and conventions of writing for a peer-reviewed scientific journal. From structure to style, titles to tables, abstracts to author lists, this book gives practical advice about the process of writing a paper and getting it published.

The emergence of scientific management in America

Directory of Open Access Journals (Sweden)

Sorin-George Toma

2014-05-01

Full Text Available A scientific approach to management was initiated for the first time in America in the late 19th century. Scientific management arose mainly from the need to increase efficiency in America, but other key factors were the spread of big businesses and the expanding application of science in industry. The aims of our paper are to present the emergence of scientific management in America and to emphasize the contribution of some of the most representatives American authors to its development. The methodological approach is literature review. Our paper shows that scientific management was essentially an American achievement that provided useful lessons for the whole human society.

Joseph Henry's Conception of Scientific Knowledge

Science.gov (United States)

Theerman, Paul

1997-04-01

Joseph Henry, America's premier physicist and physics teacher in the mid-nineteenth century, had decided views of scientific knowledge. These were expressed in two ways. First of all, scientific knowledge led to moral betterment. Thus the study of science was a morally good thing. This was not only because it led to the contemplation of God's creation, which was a standard reason justifying the study of science dating from the Scientific Revolution and even earlier. More importantly, the study of science itself was a moral discipline, imparting to scientists the habits and virtues of truthfulness, respect for others, care and diligence, and the discernment of meaningful patterns from experience. The moral ideals of science were expressed most strongly in Henry's upholding the international "Republic of Science"; conversely, cheapening science was a sign of moral failure. Second, for Henry and his generation, science provided a path to sure truth, separate from falsehood of both the politics and the quackery that characterized mid-century public life. Henry promoted this in his championing of the Smithsonian Institution a scientific establishment, against the ideas of others who wanted to make it a literary establishment or a training school for teachers. For Henry, the Smithsonian's scientific reputation would be established by relying on careful peer review in its publications, and supporting established scientists to write authoritative popular works. The purpose of both these activities was to raise the profile of science in the United States and further establish science and the scientific method as a guide to public life.

Usability in Scientific Databases

Directory of Open Access Journals (Sweden)

Ana-Maria Suduc

2012-07-01

Full Text Available Usability, most often defined as the ease of use and acceptability of a system, affects the users' performance and their job satisfaction when working with a machine. Therefore, usability is a very important aspect which must be considered in the process of a system development. The paper presents several numerical data related to the history of the scientific research of the usability of information systems, as it is viewed in the information provided by three important scientific databases, Science Direct, ACM Digital Library and IEEE Xplore Digital Library, at different queries related to this field.

Scientific Community in Algeria: Adopting Traditions and Developing Identity

Directory of Open Access Journals (Sweden)

Tatyana I. Tyukaeva

2014-01-01

Full Text Available The history of scientific development in Algeria, which has not been long, represents a series of continual rises and falls. The Algerian leadership and researchers have been making efforts to create Algeria's national science through protection from the western scientific tradition, which is reminiscent of the colonial period of the country, and at the same time adoption of scientific knowledge and scientific institutions functioning principles from abroad, with no organizational or scientific experience of their own. Since the time the independent Algerian state was established, its scientific development has been inevitably coupled with active support of European countries, especially France, and other western and non-western states. Today the Algerian leadership is highly devoted to the modernization of the national scientific and research potential in strong cooperation with its foreign partners. The article concentrates on examining the present period (the 2000s of the scientific development in Algeria. The main conclusion is that there still is a number of problems - for Algeria until now lacks an integral scientific community with the state preserving its dominating role in science and research activities. Despite these difficulties, the Algerian science has made an outstanding progress. The efficiently built organizational scientific structure, the growing science and technology cooperation with foreign countries as well as the increasing state expenses in science allow to hope for further success of the Algerian scientific development.

Einstein in love a scientific romance

CERN Document Server

Overbye, Dennis

2000-01-01

At its height, Einstein's marriage to Mileva was an extraordinary one - a colleague and often fierce adversary, Mileva was brilliantly matched with the scientific genius. Dennis Overbye seeks to present this scientific romance in a vivid light, telling the private story of the young Einstein.

A guide for writing in the scientific forum.

Science.gov (United States)

Kotsis, Sandra V; Chung, Kevin C

2010-11-01

When considering the importance of scientific writing in disseminating new discoveries and ideas, it is quite remarkable that few physicians have received any formal instruction in this essential process. This article focuses on the fundamental principles of scientific writing that also include a "style and grace" component. The art of good scientific writing is to convey scientific materials in a clear and interesting way, while avoiding incomprehensible sentences that only serve to disguise marginal contents within the article. The goal of this article is to encourage authors and readers to critically examine the art of scientific writing to overcome the barrier to effective communication.

Scientific Digital Libraries, Interoperability, and Ontologies

Science.gov (United States)

Hughes, J. Steven; Crichton, Daniel J.; Mattmann, Chris A.

2009-01-01

Scientific digital libraries serve complex and evolving research communities. Justifications for the development of scientific digital libraries include the desire to preserve science data and the promises of information interconnectedness, correlative science, and system interoperability. Shared ontologies are fundamental to fulfilling these promises. We present a tool framework, some informal principles, and several case studies where shared ontologies are used to guide the implementation of scientific digital libraries. The tool framework, based on an ontology modeling tool, was configured to develop, manage, and keep shared ontologies relevant within changing domains and to promote the interoperability, interconnectedness, and correlation desired by scientists.

The committee of scientific expertise coordination

International Nuclear Information System (INIS)

2003-01-01

Placed under the MIES control, the Committee of scientific expertise coordination defines the needs, the contain and the planing of expertises realized in function of Climate national and international decisions and negotiations calendars. The Committee verifies the different expertises and offers the administrations, scientific tools and techniques useful for the negotiations. It can also define long-dated research needs which require the scientific community mobilization. This paper provides some document of the Committee: objectives, operating and priorities of the Committee, scenarios ''Factor 4'' and ''crack technology'', perceptions and practices, developing countries (China, India...), Euromed. (A.L.B.)

Recommendations to write better scientific articles

Directory of Open Access Journals (Sweden)

Richard Threlfall (Author

2014-12-01

Full Text Available Disseminate results is one of the functions of the scientists, and we all must have approach to the knowledge to carry it a greater number of people. This is done by writing and publishing scientific articles. But though we all have good intentions and ours goals are the best, not always we get our papers are accepted and published in scientific journals. With the aim of providing assistance to achieve greater efficiency and effectiveness in our work, in this article the translation of some interesting recommendations for best writing scientific papers is presented.

Scientific literacy for democratic decision-making

Science.gov (United States)

Yacoubian, Hagop A.

2018-02-01

Scientifically literate citizens must be able to engage in making decisions on science-based social issues. In this paper, I start by showing examples of science curricula and policy documents that capitalise the importance of engaging future citizens in decision-making processes whether at the personal or at the societal levels. I elucidate the ideological underpinnings behind a number of the statements within those documents that have defined the trajectory of scientific literacy and have shaped what ought to be considered as personal and societal benefits. I argue that science curricula and policy documents can truly endorse scientific literacy when they embed principles of democratic education at their core. The latter entails fostering learning experiences where some of the underlying assumptions and political ideologies are brought to the conscious level and future citizens encouraged to reflect upon them critically and explicitly. Such a proposal empowers the future citizens to engage in critical deliberation on science-based social issues without taking the underlying status quo for granted. I end up the paper by situating the preparation of scientifically literate citizens within a framework of democratic education, discuss conditions through which a curriculum for scientific literacy can serve democratic decision-making processes, and provide modest recommendations.

On the impoverishment of scientific education.

Science.gov (United States)

Dougherty, Edward R

2013-11-11

Hannah Arendt, one of the foremost political philosophers of the twentieth century, has argued that it is the responsibility of educators not to leave children in their own world but instead to bring them into the adult world so that, as adults, they can carry civilization forward to whatever challenges it will face by bringing to bear the learning of the past. In the same collection of essays, she discusses the recognition by modern science that Nature is inconceivable in terms of ordinary human conceptual categories - as she writes, 'unthinkable in terms of pure reason'. Together, these views on scientific education lead to an educational process that transforms children into adults, with a scientific adult being one who has the ability to conceptualize scientific systems independent of ordinary physical intuition. This article begins with Arendt's basic educational and scientific points and develops from them a critique of current scientific education in conjunction with an appeal to educate young scientists in a manner that allows them to fulfill their potential 'on the shoulders of giants'. While the article takes a general philosophical perspective, its specifics tend to be directed at biomedical education, in particular, how such education pertains to translational science.

On the impovesrishment of scientific education

Science.gov (United States)

2013-01-01

Hannah Arendt, one of the foremost political philosophers of the twentieth century, has argued that it is the responsibility of educators not to leave children in their own world but instead to bring them into the adult world so that, as adults, they can carry civilization forward to whatever challenges it will face by bringing to bear the learning of the past. In the same collection of essays, she discusses the recognition by modern science that Nature is inconceivable in terms of ordinary human conceptual categories - as she writes, ‘unthinkable in terms of pure reason’. Together, these views on scientific education lead to an educational process that transforms children into adults, with a scientific adult being one who has the ability to conceptualize scientific systems independent of ordinary physical intuition. This article begins with Arendt’s basic educational and scientific points and develops from them a critique of current scientific education in conjunction with an appeal to educate young scientists in a manner that allows them to fulfill their potential ‘on the shoulders of giants’. While the article takes a general philosophical perspective, its specifics tend to be directed at biomedical education, in particular, how such education pertains to translational science. PMID:24215841

The Scientific Enterprise

Indian Academy of Sciences (India)

Srimath

The phrase pre-modern scientific may be used to describe certain attitudes and ..... But unfortunately, in the general atmosphere of poor education and collective fears .... present day science and technology that old time beliefs and traditional ...

Scientific misconduct: also an issue in nursing science?

NARCIS (Netherlands)

Fierz, K.; Gennaro, S.; Dierickx, K.; Achterberg, T. van; Morin, K.H.; Geest, S. de

2014-01-01

PURPOSE: Scientific misconduct (SMC) is an increasing concern in nursing science. This article discusses the prevalence of SMC, risk factors and correlates of scientific misconduct in nursing science, and highlights interventional approaches to foster good scientific conduct. METHODS: Using the

Proof-of-concept and feasibility demonstrations for an avalanche photodiode/photoelastic modulator-based imaging polarimeter

Data.gov (United States)

National Aeronautics and Space Administration — Building on the successful heritage of JPL’s Multiangle SpectroPolarimetric Imager (MSPI), we propose infusing HgCdTe avalanche photodiode (APD) array technology...

Examining Data Processing Work as Part of the Scientific Data Lifecycle Comparing Practices Across Four Scientific Research Groups

OpenAIRE

Paine, Drew; Lee, Charlotte

2015-01-01

Slides from Charlotte P. Lee's presentation at the 2015 iConference on our paper "Examining Data Processing Work as Part of the Scientific Data Lifecycle: Comparing Practices Across Four Scientific Research Groups".

Scientific planning for the VLT and VLTI

Science.gov (United States)

Leibundgut, B.; Berger, J.-P.

2016-07-01

An observatory system like the VLT/I requires careful scientific planning for operations and future instruments. Currently the ESO optical/near-infrared facilities include four 8m telescopes, four (movable) 1.8m telescopes used exclusively for interferometry, two 4m telescopes and two survey telescopes. This system offers a large range of scientific capabilities and setting the corresponding priorities depends good community interactions. Coordinating the existing and planned instrumentation is an important aspect for strong scientific return. The current scientific priorities for the VLT and VLTI are pushing for the development of the highest angular resolution imaging and astrometry, integral field spectroscopy and multi-object spectroscopy. The ESO 4m telescopes on La Silla will be dedicated to time domain spectroscopy and exo-planet searches with highly specialized instruments. The next decade will also see a significant rise in the scientific importance of massive ground and space-based surveys. We discuss how future developments in astronomical research could shape the VLT/I evolution.

Predicting future discoveries from current scientific literature.

Science.gov (United States)

Petrič, Ingrid; Cestnik, Bojan

2014-01-01

Knowledge discovery in biomedicine is a time-consuming process starting from the basic research, through preclinical testing, towards possible clinical applications. Crossing of conceptual boundaries is often needed for groundbreaking biomedical research that generates highly inventive discoveries. We demonstrate the ability of a creative literature mining method to advance valuable new discoveries based on rare ideas from existing literature. When emerging ideas from scientific literature are put together as fragments of knowledge in a systematic way, they may lead to original, sometimes surprising, research findings. If enough scientific evidence is already published for the association of such findings, they can be considered as scientific hypotheses. In this chapter, we describe a method for the computer-aided generation of such hypotheses based on the existing scientific literature. Our literature-based discovery of NF-kappaB with its possible connections to autism was recently approved by scientific community, which confirms the ability of our literature mining methodology to accelerate future discoveries based on rare ideas from existing literature.

Antibody Scientific Committee | Office of Cancer Clinical Proteomics Research

Science.gov (United States)

The Antibody Scientific Committee provides scientific insight and guidance to the NCI's Antibody Characterization Program. Specifically, the members of this committee evaluate request from the external scientific community for development and characterization of antibodies by the program. The members of the Antibody Scientific Committee include:

50 CFR 300.104 - Scientific research.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Scientific research. 300.104 Section 300... REGULATIONS Antarctic Marine Living Resources § 300.104 Scientific research. (a) The management measures... vessel for research purposes, unless otherwise indicated. (b) Catches taken by any vessel for research...

Scientific publications: now a marketing decision?

Science.gov (United States)

Scientists have been publishing in journals related to their disciplines. Now with the advent of the internet, many more options are now available and scientific publication has become a marketing decision. Scientific journals are rated by "impact factor" which is based on the average number of cita...

Speech and scientific paper. A rhetorical approach

Directory of Open Access Journals (Sweden)

Juan Carlos Carmona Sandoval

2013-01-01

Full Text Available This essay attempts to show that the ancient rhetorical theory has explanatory capabilities to understand and learn to write modern texts and to analyze them in order to understand their communication skills, as in the scientific article, one of the most prestigious forms on scientific communication. It starts with the notion of discourse in the field of scientific communication and then address the rhetorical dimension of the paper.

HONESTY AND GOOD PRACTICE IN SCIENTIFIC RESEARCH

Directory of Open Access Journals (Sweden)

Jože Trontelj

2008-01-01

Full Text Available In the field of science, we see cases of misconduct ranging from relatively minor departurefrom good manners and practice to more severe dishonesty and even criminal behaviour.Unethical experiments on human beings are among the worst abuses in scientific researchin medicine. Unethical research is usually also worthless from the scientific point of view.The commonest types of offence, however, include mismanagement of data, conscious misinterpretation,wrongful authorship, biased citation of work by others, plagiarism, misquotationor suppression of findings for the interests or upon the request of the sponsor or In the field of science, we see cases of misconduct ranging from relatively minor departurefrom good manners and practice to more severe dishonesty and even criminal behaviour.Unethical experiments on human beings are among the worst abuses in scientific researchin medicine. Unethical research is usually also worthless from the scientific point of view.The commonest types of offence, however, include mismanagement of data, conscious misinterpretation,wrongful authorship, biased citation of work by others, plagiarism, misquotationor suppression of findings for the interests or upon the request of the sponsor or In the field of science, we see cases of misconduct ranging from relatively minor departurefrom good manners and practice to more severe dishonesty and even criminal behaviour.Unethical experiments on human beings are among the worst abuses in scientific researchin medicine. Unethical research is usually also worthless from the scientific point of view.The commonest types of offence, however, include mismanagement of data, conscious misinterpretation,wrongful authorship, biased citation of work by others, plagiarism, misquotationor suppression of findings for the interests or upon the request of the sponsor or even a senior scientist in the team. Every case of misconduct and fraud may causedamage: it may undermine confidence of the

Infrared detectors, focal plane arrays, and imaging sensors; Proceedings of the Meeting, Orlando, FL, Mar. 30, 31, 1989

Science.gov (United States)

Dereniak, Eustace L.; Sampson, Robert T.

1989-10-01

The present conference on advancements in IR detectors, Schottky-barrier focal plane arrays, CCD image analysis, and HgCdTe materials gives attention to a 256 x 256 PtSi array for IR astronomy, proposals for a second-generation meteosat's advanced optical payload, cryogenic bipolar technology for on-focal-plane signal processing, a parallel cellular processing system for fast generation of perspective plots, and ultrahigh-speed CCD image sensors for scanning applications. Also discussed are MBE GaAs rib waveguide experiments at 10.6 microns, an interferometric thermal detector, the development status of superconducting IR detector research, the absorption coefficients of n-type Hg(1-x)Cd(x)Te samples, and the influence of the surface channel on crosstalk in HgCdTe photovoltaic arrays.

Addressing big data challenges for scientific data infrastructure

NARCIS (Netherlands)

Demchenko, Y.; Zhao, Z.; Grosso, P.; Wibisono, A.; de Laat, C.

2012-01-01

This paper discusses the challenges that are imposed by Big Data Science on the modern and future Scientific Data Infrastructure (SDI). The paper refers to different scientific communities to define requirements on data management, access control and security. The paper introduces the Scientific

48 CFR 435.010 - Scientific and technical reports.

Science.gov (United States)

2010-10-01

... CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 435.010 Scientific and technical reports... all scientific and technical reports to the National Technical Information Service at the address... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Scientific and technical...

The scientific status of fusion

International Nuclear Information System (INIS)

Crandall, D.H.

1989-01-01

The development of fusion energy has been a large-scale scientific undertaking of broad interest. The magnetic plasma containment in tokamaks and the laser-drive ignition of microfusion capsules appear to be scientifically feasible sources of energy. These concepts are bounded by questions of required intensity in magnetid field and plasma currents or in drive energy and, for both concepts, by issues of plasma stability and energy transport. The basic concept and the current scientific issues are described for magnetic fusion and for the interesting, but likely infeasible, muon-catalyzed fusion concept. Inertial fusion is mentioned, qualitatively, to complete the context. For magnetic fusion, the required net energy production within the plasma may be accomplished soon, but the more useful goal of self-sustained plasma ignition requires a new device of somewhat uncertain (factor of 2) cost and size. (orig.)

How to write and publish a scientific paper

CERN Document Server

Day, Robert A

2011-01-01

Writing and publishing journal articles are crucial to scientific careers. Unfortunately, many young scientists find the process of communicating scientific information effectively a complete mystery. By providing practical, readable, and sometimes humorous guidance, this book helps researchers gain the knowledge, skills, and confidence to succeed in communicating about their work. This seventh edition of "How to Write and Publish a Scientific Paper" contains 41 chapters focused upon two separate tasks: how to write the respective sections of a scientific paper and how to publish the paper. Other related topics include approaching a writing project, following ethical principles in scientific publishing, preparing oral presentations and poster presentations, writing grant proposals, and working with the popular media. The authors provide considerable guidance on appropriate scientific writing style as well as an extensive list of words and expressions to avoid - and supply the language to substitute for them.

Scientific writing and communication papers, proposals, and presentations

CERN Document Server

Hofmann, Angelika H

2014-01-01

Scientific Writing and Communication: Papers, Proposals, and Presentations, Second Edition, serves as a comprehensive " reference guide to scientific writing and communication. The second edition of Angelika Hofmann's successful text covers all the areas of scientific communication that a scientist needs to know and master in order to successfully promote his or her research and career. This unique "all-in-one" handbook begins with a discussion of the basic principles of scientific writing style and composition and then applies these principles to writing research papers, review articles, grant proposals, research statements, and resumes, as well as to preparing academic presentations and posters. Scientific Writing and Communication: Papers, Proposals, and Presentations has been used successfully for a number of years in courses on scientific writing at various universities and institutes worldwide. Readers of the second edition will find numerous new examples and exercises, many with an expanded interdiscip...

1997 Scientific Report

International Nuclear Information System (INIS)

Govaerts, P.

1998-01-01

The 1997 Scientific Report of the Belgian Nuclear Research Centre SCK-CEN describes progress achieved in nuclear safety, radioactive waste management, radiation protection and safeguards. In the field of nuclear research, the main projects concern the behaviour of high-burnup and MOX fuel, the embrittlement of reactor pressure vessels, the irradiation-assisted stress corrosion cracking of reactor internals, and irradiation effects on materials of fusion reactors. In the field of radioactive waste management, progress in the following domains is reported: the disposal of high-level radioactive waste and spent fuel in a clay formation, the decommissioning of nuclear installations, the study of alternative waste-processing techniques. For radiation protection and safeguards, the main activities reported on are in the field of site and environmental restoration, emergency planning and response and scientific support to national and international programmes

Scientific report 1999

International Nuclear Information System (INIS)

1999-01-01

The aim of this report is to outline the main developments of the 'Departement des Reacteurs Nucleaires' (DRN) during the year 1999. DRN is one of the CEA Institutions. This report is divided in three main parts: the DRN scientific programs, the scientific and technical publications (with abstracts in English) and economic data on staff, budget and communication. Main results of the Department for the year 1999 are presented giving information on the simulation of low mach number compressible flow, experimental irradiation of multi-materials, progress in the dry route conversion process of UF 6 to UO 2 , the neutronics, the CASCADE installation, the corium, the BWR type reactor cores technology, the reactor safety, the transmutation of americium and fuel cell flow studies, the crack propagation, the hybrid systems and the CEA sites improvement. (A.L.B.)

Scientific and Technological Report 2011

International Nuclear Information System (INIS)

Lopez Milla, Alcides; Prado Cuba, Antonio; Agapito Panta, Juan; Montoya Rossi, Eduardo

2013-01-01

This annual scientific and technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2011. This report includes 30 papers divided in 8 subject matters, such as: physics and chemistry, materials science, nuclear engineering, mining industrial and environmental applications, medical and biological applications, radiation protection and nuclear safety, scientific instrumentation and management aspects. It also includes annexes. (APC)

Scientific and Technological Report 2010

International Nuclear Information System (INIS)

Prado Cuba, Antonio; Santiago Contreras, Julio; Solis Veliz, Jose; Lopez Moreno, Edith

2011-10-01

This annual scientific and technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2010. This report includes 41 papers divided in 8 subject matters, such as: physics and chemistry, materials science, nuclear engineering, mining industrial and environmental applications, medical and biological applications, radiation protection and nuclear safety, scientific instrumentation and management aspects. It also includes annexes. (APC)

Similarity measures for scientific workflows

OpenAIRE

Starlinger, Johannes

2016-01-01

In Laufe der letzten zehn Jahre haben Scientific Workflows als Werkzeug zur Erstellung von reproduzierbaren, datenverarbeitenden in-silico Experimenten an Aufmerksamkeit gewonnen, in die sowohl lokale Skripte und Anwendungen, als auch Web-Services eingebunden werden können. Über spezialisierte Online-Bibliotheken, sogenannte Repositories, können solche Workflows veröffentlicht und wiederverwendet werden. Mit zunehmender Größe dieser Repositories werden Ähnlichkeitsmaße für Scientific Workfl...

Science communication at scientific societies.

Science.gov (United States)

Braha, Jeanne

2017-10-01

Scientific societies can play a key role in bridging the research and practice of scientists' engagement of public audiences. Societies are beginning to support translation of science communication research, connections between scientists and audiences, and the creation of opportunities for scientists to engage publics without extensive customization. This article suggests roles, strategies, and mechanisms for scientific societies to promote and enhance their member's engagement of public audiences. Copyright © 2017 Elsevier Ltd. All rights reserved.

Scientific Literacy of High School Students.

Science.gov (United States)

Lucas, Keith B.; Tulip, David F.

This investigation was undertaken in order to establish the status of scientific literacy among three groups of secondary school students in four Brisbane, Australia high schools, and to reduce the apparent reticence of science teachers to evaluate students' achievement in the various dimensions of scientific literacy by demonstrating appropriate…

Nine Criteria for a Measure of Scientific Output

Science.gov (United States)

Kreiman, Gabriel; Maunsell, John H. R.

2011-01-01

Scientific research produces new knowledge, technologies, and clinical treatments that can lead to enormous returns. Often, the path from basic research to new paradigms and direct impact on society takes time. Precise quantification of scientific output in the short-term is not an easy task but is critical for evaluating scientists, laboratories, departments, and institutions. While there have been attempts to quantifying scientific output, we argue that current methods are not ideal and suffer from solvable difficulties. Here we propose criteria that a metric should have to be considered a good index of scientific output. Specifically, we argue that such an index should be quantitative, based on robust data, rapidly updated and retrospective, presented with confidence intervals, normalized by number of contributors, career stage and discipline, impractical to manipulate, and focused on quality over quantity. Such an index should be validated through empirical testing. The purpose of quantitatively evaluating scientific output is not to replace careful, rigorous review by experts but rather to complement those efforts. Because it has the potential to greatly influence the efficiency of scientific research, we have a duty to reflect upon and implement novel and rigorous ways of evaluating scientific output. The criteria proposed here provide initial steps toward the systematic development and validation of a metric to evaluate scientific output. PMID:22102840

PROSCENIUM OF SCIENTIFIC MANAGEMENT

Directory of Open Access Journals (Sweden)

Vasile Berlingher

2013-09-01

Full Text Available During the last three decades of the nineteenth century, organizations developed rapidly, their managers began to realize that they had too frequent managerial problems; this awareness lead to a new phase of development of scientific management. Examining the titles published in that period, it can be concluded that management issues that pose interest related to payroll and payroll systems, problems exacerbated by the industrial revolution and related work efficiency. Noting that large organizations losing power, direct supervision, the managers were looking for incentives to replace this power . One of the first practitioners of this new management system was Henry R. Towne, the president of the well-known enterprise "Yale and Towne Manufacturing Company", which applied the management methods in his company workshops. Publishers of magazines "Industrial Management" and "The Engineering Magazine" stated that HR Towne is, undisputedly, the pioneer of scientific management. He initiated the systematic application of effective management methods and his famous article "The Engineer as Economist" provided to the company. "American Society of Mechanical Engineers" in 1886 was the one that probably inspired Frederick W. Taylor to devote his entire life and work in scientific management.

A Computing Environment to Support Repeatable Scientific Big Data Experimentation of World-Wide Scientific Literature

Energy Technology Data Exchange (ETDEWEB)

Schlicher, Bob G [ORNL; Kulesz, James J [ORNL; Abercrombie, Robert K [ORNL; Kruse, Kara L [ORNL

2015-01-01

A principal tenant of the scientific method is that experiments must be repeatable and relies on ceteris paribus (i.e., all other things being equal). As a scientific community, involved in data sciences, we must investigate ways to establish an environment where experiments can be repeated. We can no longer allude to where the data comes from, we must add rigor to the data collection and management process from which our analysis is conducted. This paper describes a computing environment to support repeatable scientific big data experimentation of world-wide scientific literature, and recommends a system that is housed at the Oak Ridge National Laboratory in order to provide value to investigators from government agencies, academic institutions, and industry entities. The described computing environment also adheres to the recently instituted digital data management plan mandated by multiple US government agencies, which involves all stages of the digital data life cycle including capture, analysis, sharing, and preservation. It particularly focuses on the sharing and preservation of digital research data. The details of this computing environment are explained within the context of cloud services by the three layer classification of Software as a Service , Platform as a Service , and Infrastructure as a Service .

Creating Posters for Effective Scientific Communication.

Science.gov (United States)

Bavdekar, Sandeep B; Vyas, Shruti; Anand, Varun

2017-08-01

A scientific poster is a summary of one's research that is presented in a visually engaging manner. Posters are presented as a means of short and quick scientific communications at conferences and scientific meetings. Presenting posters has advantages for the presenters and for conference attendees and organizers. It also plays a part in dissemination of research findings and furthering science. An effective poster is the one that focuses on a single message and conveys it through a concise and artistically attractive manner. This communication intends to provide tips on creating an effective poster to young scientists. © Journal of the Association of Physicians of India 2011.

Recent Developments in Scientific Research Ballooning

International Nuclear Information System (INIS)

Jones, W. Vernon

2007-01-01

The National Aeronautics and Space Administration (NASA) Balloon Program is committed to meeting the need for extended duration scientific investigations by providing advanced balloon vehicles and support systems. A sea change in ballooning capability occurred with the inauguration of 8 - 20 day flights around Antarctica in the early 1990's. The attainment of 28-31 day flights and a record-breaking 42-day flight in, respectively, two and three circumnavigations of the continent has greatly increased the expectations of the scientific users. A new super-pressure balloon is currently under development for future flights of 60-100 days at any latitude, which would bring another sea change in scientific research ballooning

48 CFR 235.010 - Scientific and technical reports.

Science.gov (United States)

2010-10-01

....010 Scientific and technical reports. (b) For DoD, the Defense Technical Information Center is responsible for collecting all scientific and technical reports. For access to these reports, follow the... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Scientific and technical...

Scientific Literacy: Resurrecting the Phoenix with Thinking Skills

Science.gov (United States)

Deming, John C.; O'Donnell, Jacqueline R.; Malone, Christopher J.

2012-01-01

Prior research suggests that students' understanding of scientific concepts is pre-determined by their reasoning ability. Other efforts suggest that American students' scientific literacy is in decline. One difficulty Bybee (2009) acknowledges is that there are two divergent philosophical models of scientific literacy. The first describes the…

The Early Scientific Contributions of J. Robert Oppenheimer: Why Did the Scientific Community Miss the Black Hole Opportunity?

Science.gov (United States)

Ortega-Rodríguez, M.; Solís-Sánchez, H.; Boza-Oviedo, E.; Chaves-Cruz, K.; Guevara-Bertsch, M.; Quirós-Rojas, M.; Vargas-Hernández, S.; Venegas-Li, A.

2017-04-01

We assess the scientific value of Oppenheimer's research on black holes in order to explain its neglect by the scientific community, and even by Oppenheimer himself. Looking closely at the scientific culture and conceptual belief system of the 1930s, the present article seeks to supplement the existing literature by enriching the explanations and complicating the guiding questions. We suggest a rereading of Oppenheimer as a figure both more intriguing for the history of astrophysics and further ahead of his time than is commonly supposed.

Kaleidoscope: Scientific Quality Committee - final report

DEFF Research Database (Denmark)

Dirckinck-Holmfeld, Lone; Laurillard, Diana

To shape a body of reference at a scientific level for the European TEL research communities. To make recommendations (i) to support a policy for the enhancement of research in Europe in this field, (ii) to survey the development of the field, and (iii) to build scientific collaboration on top of...

INNER DIALOGICITY OF MEDICAL SCIENTIFIC TEXTS

Directory of Open Access Journals (Sweden)

Efremova Nataliya Vladimirovna

2015-06-01

Full Text Available The author studies inner dialogicity as an integral property of a scientist's thinking activity, a way of a scientific idea development, one of the cognitive and discursive mechanisms of new knowledge formation, its crystallization and dementalisation in a text, as a way of search for truth. Such approach to dialogicity in the study of a scientific text makes it possible to analyze the cogitative processes proceeding in human consciousness and cognitive activity, allows to fully understand the stated scientific concept, to define pragmatic strategies of the author, to plunge into his reflexive world. On the material of medical scientific texts of N.M. Amosov and F. G. Uglov, famous scientists in the field of cardio surgery, it is established that traces of internal dialogicity manifestation in the textual space of scientists actualize the origin of new knowledge, the change of author's semantic positions, his ability to reflect, compare, analyze his own thoughts and actions, to estimate oneself and the features of thinking process which are realized in logic of a statement of the scientific concept, an explanation of concepts, terms at judgment of the points of view of contemporaries and predecessors, adherents and scientist's opponents, and also orientation to the addressee's presupposition, activization of his cogitative activity. Linguistic, discursive, verbal analysis singles out the impact on the addressee, his mental activity.

Scientific Literacy Campaign among Children with Special Needs ...

African Journals Online (AJOL)

... for them and equipping them to make decisions about matters which affect their well-being. The resources for scientific literacy should be provided. The importance of scientific literacy among the gifted and the necessity of assessment of scientific literacy level among children with special needs are adequately discussed.

Hypothesis testing of scientific Monte Carlo calculations

Science.gov (United States)

Wallerberger, Markus; Gull, Emanuel

2017-11-01

The steadily increasing size of scientific Monte Carlo simulations and the desire for robust, correct, and reproducible results necessitates rigorous testing procedures for scientific simulations in order to detect numerical problems and programming bugs. However, the testing paradigms developed for deterministic algorithms have proven to be ill suited for stochastic algorithms. In this paper we demonstrate explicitly how the technique of statistical hypothesis testing, which is in wide use in other fields of science, can be used to devise automatic and reliable tests for Monte Carlo methods, and we show that these tests are able to detect some of the common problems encountered in stochastic scientific simulations. We argue that hypothesis testing should become part of the standard testing toolkit for scientific simulations.

Instructional scientific humor in the secondary classroom

Science.gov (United States)

Wizner, Francine

This study is an examination of the manner in which educators employ scientific content humor and how that humor is perceived by their students. Content humor is a useful strategy in drawing the attention of students and improving their receptivity toward scientific information. It is also a useful tool in combating the growing distractions of the electronic classroom. Previous studies have found that humor has a positive effect on knowledge, memory, and understanding. However, few studies have been conducted below the undergraduate level and mainly quantitative measures of student recall have been used to measure learning. This study employed multiple data sources to determine how two secondary biology teachers used humor in order to explain scientific concepts and how their students perceived their teachers' use of scientific instructional humor. Evidence of student humor reception was collected from four students in each of the two classes. All of the scientific instructional humor used in the studied classrooms was cognitive in nature, varying among factual, procedural, conceptual, and metacognitive knowledge. Teachers tended to use dialogic forms of humor. Their scientific humor reflected everyday experiences, presented queries, poked fun at authority, and asked students to search out new perspectives and perform thought experiments. Teachers were the primary actors in performing the humorous events. The events were sometimes physical exaggerations of words or drawings, and they occurred for the purpose of establishing rapport or having students make connections between scientific concepts and prior knowledge. Student perceptions were that teachers did employ humor toward instructional objectives that helped their learning. Helping students become critical thinkers is a trademark of science teachers. Science teachers who take the risk of adopting some attributes of comedians may earn the reward of imparting behaviors on their students like critical thinking

New approaches to glove box design at Hanford

International Nuclear Information System (INIS)

Lini, D.C.; Fisher, F.D.; Walters, F.F.

1986-01-01

Glove boxes provide the primary environmental containment system for plutonium processing operations at US Dept. of Energy (DOE)-owned facilities such as Rockwell Hanford. As noted in previous presentations, glove box designs and operations have evolved through stages that are a result of advances in processing techniques, new regulatory requirements, and cost escalation. These factors will continue to influence the current glove box designs and operations. The purpose of this presentation is to discuss required upgrades and changes that are being incorporated into glove boxes being installed at Rockwell Hanford and other DOE installations or are being evaluated for future upgrades

Hydrologic bibliography of the Columbia River basalts in Washington with selected annotations

International Nuclear Information System (INIS)

Tanaka, H.; Wildrick, L.; Pearson, B.

1979-08-01

The objective of this compilation is to present a comprehensive listing of the published, unpublished, and open file references pertaining to the surface and subsurface hydrology of the Columbia River basalts within the State of Washington and is presented in support of Rockwell's hydrologic data compilation effort for the Basalt Waste Isolation Program. A comprehensive, annotated bibliography of the Pasco Basin (including the Hanford Site) hydrology has been prepared for Rockwell as part of the Pasco Basin hydrology studies. In order to avoid unnecessary duplication, no effort was made to include a complete list of bibliographic references on Hanford in this volume

Scientific publishing: some food for thought

Directory of Open Access Journals (Sweden)

Vittorio Bo

2007-03-01

Full Text Available Scientific publishing, here to be considered in a broader sense, as publishing of both specialised scientific journals and science popularisation works addressed to a wider audience, has been sailing for some years on troubled waters. To gather some possible food for thought is the purpose of this brief article.

Extracting Core Claims from Scientific Articles

NARCIS (Netherlands)

Jansen, Tom; Kuhn, Tobias

2017-01-01

The number of scientific articles has grown rapidly over the years and there are no signs that this growth will slow down in the near future. Because of this, it becomes increasingly difficult to keep up with the latest developments in a scientific field. To address this problem, we present here an

Megapixel mercury cadmium telluride focal plane arrays for infrared imaging out to 12 microns, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We propose the fabrication of large format, long wave infrared (LWIR) mercury cadmium telluride (HgCdTe or MCT) detector arrays where the cutoff wavelength is...

Scientific Resource EXplorer

Science.gov (United States)

Xing, Z.; Wormuth, A.; Smith, A.; Arca, J.; Lu, Y.; Sayfi, E.

2014-12-01

Inquisitive minds in our society are never satisfied with curatedimages released by a typical public affairs office. They always want tolook deeper and play directly on original data. However, most scientificdata products are notoriously hard to use. They are immensely large,highly distributed and diverse in format. In this presentation,we will demonstrate Resource EXplorer (REX), a novel webtop applicationthat allows anyone to conveniently explore and visualize rich scientificdata repositories, using only a standard web browser. This tool leverageson the power of Webification Science (w10n-sci), a powerful enabling technologythat simplifies the use of scientific data on the web platform.W10n-sci is now being deployed at an increasing number of NASA data centers,some of which are the largest digital treasure troves in our nation.With REX, these wonderful scientific resources are open for teachers andstudents to learn and play.

Constructing a Scientific Explanation—A Narrative Account

Science.gov (United States)

Yeo, Jennifer; Gilbert, John K.

2014-07-01

Studies analyzing explanations that have been constructed by science students have found that they were generally weak and lack necessary features. The goal of this study was to establish the competencies that one needs to construct a scientific explanation. Scientific explanations can be looked at in three ways, in terms of their function, form and level, as being essentially sign-making processes. Taking a case study approach and using Lemke's multimodal framework, we analyzed the scientific explanation of an electromagnetic induction phenomenon constructed by one high school student. We found that such a construction involves the complex coordination of different types of signs, not only to represent the entities in the phenomenon, but also to support thinking and reasoning about it at abstract levels. Scientific conventions and rules, and everyday material and social tools were found to be crucial in shifting from one level of abstraction to another. The findings highlight the importance of developing the skillful use of schemes of scientific representation by students and familiarizing them with commonly encountered contexts.

Scientific literacy and the social constructivist perspective

Directory of Open Access Journals (Sweden)

Antić Slobodanka

2015-01-01

Full Text Available The term scientific literacy is already common in our educational rhetoric. Although the term is widely used, there are no papers that analyse the definition of the term and the rangeitencompasses in Serbia. If scientific literacy is a necessary outcome of education, this analysis is an important base for designing the teaching/learning process which is intended to develop such an outcome. Therefore, this paper provides an analysis of the concept of scientific literacy (SL, the different viewpoints on SL and the nature of the concept. Furthermore, five key lines as courses of action in the teaching/learning process, necessary for the development of these competencies, are defined: appreciation ofstudents' previous knowledge, encouragement of students' basic functional literacy and reading comprehension skills, the development of students' understanding of the socio-cultural perspective on the origin and use of scientific knowledge and technological products, and practicing of scientific research, either through school science or science applied in the context of cooperation between school and the local community, i.e. in the socio-cultural background where students live.

On the Existence and Uniqueness of the Scientific Method.

Science.gov (United States)

Wagensberg, Jorge

2014-01-01

The ultimate utility of science is widely agreed upon: the comprehension of reality. But there is much controversy about what scientific understanding actually means, and how we should proceed in order to gain new scientific understanding. Is there a method for acquiring new scientific knowledge? Is this method unique and universal? There has been no shortage of proposals, but neither has there been a shortage of skeptics about these proposals. This article proffers for discussion a potential scientific method that aspires to be unique and universal and is rooted in the recent and ancient history of scientific thinking. Curiously, conclusions can be inferred from this scientific method that also concern education and the transmission of science to others.

Deutsches Elektronen-Synchrotron DESY. Scientific annual report 1991

International Nuclear Information System (INIS)

1991-11-01

The scientific annual report 1991 presented by DESY again is a very detailed summary of the activities. The HERA activities reported for the most part deal with the preparatory work for the scientific programme for electron-proton collisions in HERA, and with the modified DORIS III electron-positron storage ring. But at the time this annual report will have been published, the physics studies at HERA will have yielded the first and certainly interesting scientific results, and there also are scientific results available of experiments with the newly installed beam guides in DORIS. (orig.) [de

CAD/CAM and scientific data management at Dassault

Science.gov (United States)

Bohn, P.

1984-01-01

The history of CAD/CAM and scientific data management at Dassault are presented. Emphasis is put on the targets of the now commercially available software CATIA. The links with scientific computations such as aerodynamics and structural analysis are presented. Comments are made on the principles followed within the company. The consequences of the approximative nature of scientific data are examined. Consequence of the new history function is mainly its protection against copy or alteration. Future plans at Dassault for scientific data appear to be in opposite directions compared to some general tendencies.

The Associative Basis of Scientific Creativity: A Model Proposal

Directory of Open Access Journals (Sweden)

Esra Kanli

2014-06-01

Full Text Available Creativity is accepted as an important part of scientific skills. Scientific creativity proceeds from a need or urge to solve a problem, and in-volves the production of original and useful ideas or products. Existing scientific creativity theories and tests do not feature the very im-portant thinking processes, such as analogical and associative thinking, which can be consid-ered crucial in creative scientific problem solv-ing. Current study’s aim is to provide an alter-native model and explicate the associative basis of scientific creativity. Emerging from the re-viewed theoretical framework, Scientific Asso-ciations Model is proposed. This model claims that, similarity and mediation constitutes the basis of creativity and focuses on three compo-nents namely; associative thinking, analogical thinking (analogical reasoning & analogical problem solving and insight which are consid-ered to be main elements of scientific associa-tive thinking.

Women scientists' scientific and spiritual ways of knowing

Science.gov (United States)

Buffington, Angela Cunningham

While science education aims for literacy regarding scientific knowledge and the work of scientists, the separation of scientific knowing from other knowing may misrepresent the knowing of scientists. The majority of science educators K-university are women. Many of these women are spiritual and integrate their scientific and spiritual ways of knowing. Understanding spiritual women of science would inform science education and serve to advance the scientific reason and spirituality debate. Using interviews and grounded theory, this study explores scientific and spiritual ways of knowing in six women of science who hold strong spiritual commitments and portray science to non-scientists. From various lived experiences, each woman comes to know through a Passive knowing of exposure and attendance, an Engaged knowing of choice, commitment and action, an Mindful/Inner knowing of prayer and meaning, a Relational knowing with others, and an Integrated lifeworld knowing where scientific knowing, spiritual knowing, and other ways of knowing are integrated. Consequences of separating ways of knowing are discussed, as are connections to current research, implications to science education, and ideas for future research. Understanding women scientists' scientific/ spiritual ways of knowing may aid science educators in linking academic science to the life-worlds of students.

Measuring scientific research in emerging nano-energy field

Science.gov (United States)

Guan, Jiancheng; Liu, Na

2014-04-01

The purpose of this paper is to comprehensively explore scientific research profiles in the field of emerging nano-energy during 1991-2012 based on bibliometrics and social network analysis. We investigate the growth pattern of research output, and then carry out across countries/regions comparisons on research performances. Furthermore, we examine scientific collaboration across countries/regions by analyzing collaborative intensity and networks in 3- to 4-year intervals. Results indicate with an impressively exponential growth pattern of nano-energy articles, the world share of scientific "giants," such as the USA, Germany, England, France and Japan, display decreasing research trends, especially in the USA. Emerging economies, including China, South Korea and India, exhibit a rise in terms of the world share, illustrating strong development momentum of these countries in nano-energy research. Strikingly, China displays a remarkable rise in scientific influence rivaling Germany, Japan, France, and England in the last few years. Finally, the scientific collaborative network in nano-energy research has expanded steadily. Although the USA and several major European countries play significantly roles on scientific collaboration, China and South Korea exert great influence on scientific collaboration in recent years. The findings imply that emerging economies can earn competitive advantages in some emerging fields by properly engaging a catch-up strategy.

Amplify scientific discovery with artificial intelligence

Energy Technology Data Exchange (ETDEWEB)

Gil, Yolanda; Greaves, Mark T.; Hendler, James; Hirsch, Hyam

2014-10-10

Computing innovations have fundamentally changed many aspects of scientific inquiry. For example, advances in robotics, high-end computing, networking, and databases now underlie much of what we do in science such as gene sequencing, general number crunching, sharing information between scientists, and analyzing large amounts of data. As computing has evolved at a rapid pace, so too has its impact in science, with the most recent computing innovations repeatedly being brought to bear to facilitate new forms of inquiry. Recently, advances in Artificial Intelligence (AI) have deeply penetrated many consumer sectors, including for example Apple’s Siri™ speech recognition system, real-time automated language translation services, and a new generation of self-driving cars and self-navigating drones. However, AI has yet to achieve comparable levels of penetration in scientific inquiry, despite its tremendous potential in aiding computers to help scientists tackle tasks that require scientific reasoning. We contend that advances in AI will transform the practice of science as we are increasingly able to effectively and jointly harness human and machine intelligence in the pursuit of major scientific challenges.

Forecast Mekong 2012: Building scientific capacity

Science.gov (United States)

Stefanov, James E.

2012-01-01

In 2009, U.S. Secretary of State Hillary R. Clinton joined the Foreign Ministers of Cambodia, Laos, Thailand, and Vietnam in launching the Lower Mekong Initiative to enhance U.S. engagement with the countries of the Lower Mekong River Basin in the areas of environment, health, education, and infrastructure. The U.S. Geological Survey Forecast Mekong supports the Lower Mekong Initiative through a variety of activities. The principal objectives of Forecast Mekong include the following: * Build scientific capacity in the Lower Mekong Basin and promote cooperation and collaboration among scientists working in the region. * Provide data, information, and scientific models to help resource managers there make informed decisions. * Produce forecasting and visualization tools to support basin planning, including climate change adaptation. The focus of this product is Forecast Mekong accomplishments and current activities related to the development of scientific capacity at organizations and institutions in the region. Building on accomplishments in 2010 and 2011, Forecast Mekong continues to enhance scientific capacity in the Lower Mekong Basin with a suite of activities in 2012.

The OceanoScientific® Programme

OpenAIRE

Kramp, M.; Gaillard, F.; Blouch, P.; Fietzek, Peer

2010-01-01

The aim of the OceanoScientific® Programme and its SolOceans One-design Class is to collect and transmit scientific data from the ocean-atmosphere interface during regularly starting offshore sailing races. Data collected on board the first SolOceans One-design proved to be of good quality. Thus the first important step towards the introduction of an accepted as well as highly valuable platform for ocean surface and atmospheric parameter acquisition has been taken. The serial production of t...

Scientific Medical Journal

African Journals Online (AJOL)

Scientific Medical Journal: an official journal of Egyptian Medical Education provides a forum for dissemination of knowledge, exchange of ideas, inform of exchange of ideas, information and experience among workers, investigators and clinicians in all disciplines of medicine with emphasis on its treatment and prevention.

Analysis According to Certain Variables of Scientific Literacy among Gifted Students That Participate in Scientific Activities at Science and Art Centers

Science.gov (United States)

Kömek, Emre; Yagiz, Dursun; Kurt, Murat

2015-01-01

The purpose of this study is to analyze scientific literacy levels relevant to science and technology classes among gifted students that participate in scientific activities at science and art centers. This study investigated whether there was a significant difference in scientific literacy levels among gifted students according to the areas of…

THE SPANISH SCIENTIFIC JOURNALS: A DESCRIPTIVE APPROACH

Directory of Open Access Journals (Sweden)

Melba G. Claudio-González

2017-02-01

Full Text Available The main objective of this article is to present a broad description of Spanish scientific journals. The results were obtained from a survey distributed to 1,280 editors of Spanish scientific journals included in Dulcinea database (2012 edition. The response rate was 43,8%. As specific objectives, the study aimed to characterize scientific journals and to analyze the particularities of a set of parameters that make up the economic, strategic and operational dimensions of the journals in the period studied. The results show that the funding model of the Spanish scientific journals depends mainly on institutional support, that many journals lack a stable organizational structure and rely heavily on volunteer work, and that the debate on the limitations and difficulties affecting the development of open access remains open.

Is writing style predictive of scientific fraud?

DEFF Research Database (Denmark)

Braud, Chloé Elodie; Søgaard, Anders

2017-01-01

The problem of detecting scientific fraud using machine learning was recently introduced, with initial, positive results from a model taking into account various general indicators. The results seem to suggest that writing style is predictive of scientific fraud. We revisit these initial experime......The problem of detecting scientific fraud using machine learning was recently introduced, with initial, positive results from a model taking into account various general indicators. The results seem to suggest that writing style is predictive of scientific fraud. We revisit these initial...... experiments, and show that the leave-one-out testing procedure they used likely leads to a slight over-estimate of the predictability, but also that simple models can outperform their proposed model by some margin. We go on to explore more abstract linguistic features, such as linguistic complexity...

African Scientific Network: A model to enhance scientific research in developing countries

Science.gov (United States)

Kebede, Abebe

2002-03-01

Africa has over 350 higher education institutions with a variety of experiences and priorities. The primary objectives of these institutions are to produce white-collar workers, teachers, and the work force for mining, textiles, and agricultural industries. The state of higher education and scientific research in Africa have been discussed in several conferences. The proposals that are generated by these conferences advocate structural changes in higher education, North-South institutional linkages, mobilization of the African Diaspora and funding. We propose a model African Scientific Network that would facilitate and enhance international scientific partnerships between African scientists and their counterparts elsewhere. A recent article by James Lamout (Financial Times, August 2, 2001) indicates that emigration from South Africa alone costs $8.9 billion in lost human resources. The article also stated that every year 23,000 graduates leave Africa for opportunities overseas, mainly in Europe, leaving only 20,000 scientists and engineers serving over 600 million people. The International Organization for Migration states that the brain drain of highly skilled professionals from Africa is making economic growth and poverty alleviation impossible across the continent. In our model we will focus on a possible networking mechanism where the African Diaspora will play a major role in addressing the financial and human resources needs of higher education in Africa

Proportional Reasoning: An Essential Component of Scientific Understanding

Science.gov (United States)

Hilton, Annette; Hilton, Geoff

2016-01-01

In many scientific contexts, students need to be able to use mathematical knowledge in order to engage in scientific reasoning and problem-solving, and their understanding of scientific concepts relies heavily on their ability to understand and use mathematics in often new or unfamiliar contexts. Not only do science students need high levels of…

Technical-scientific production of IPEN - 1992

International Nuclear Information System (INIS)

1993-01-01

The technical-scientific production from Nuclear and Energetic Research Institute (IPEN), Brazil, is presented, including 471 references, where 421 papers are from the 1992 year and 50 from the earlier years. The main areas that the IPEN acts are: technical-scientific development of materials; nuclear processes; research reactors; nuclear utilization; nuclear safety and human resources formation. (C.G.C.)

Accelerating scientific discovery : 2007 annual report.

Energy Technology Data Exchange (ETDEWEB)

Beckman, P.; Dave, P.; Drugan, C.

2008-11-14

As a gateway for scientific discovery, the Argonne Leadership Computing Facility (ALCF) works hand in hand with the world's best computational scientists to advance research in a diverse span of scientific domains, ranging from chemistry, applied mathematics, and materials science to engineering physics and life sciences. Sponsored by the U.S. Department of Energy's (DOE) Office of Science, researchers are using the IBM Blue Gene/L supercomputer at the ALCF to study and explore key scientific problems that underlie important challenges facing our society. For instance, a research team at the University of California-San Diego/ SDSC is studying the molecular basis of Parkinson's disease. The researchers plan to use the knowledge they gain to discover new drugs to treat the disease and to identify risk factors for other diseases that are equally prevalent. Likewise, scientists from Pratt & Whitney are using the Blue Gene to understand the complex processes within aircraft engines. Expanding our understanding of jet engine combustors is the secret to improved fuel efficiency and reduced emissions. Lessons learned from the scientific simulations of jet engine combustors have already led Pratt & Whitney to newer designs with unprecedented reductions in emissions, noise, and cost of ownership. ALCF staff members provide in-depth expertise and assistance to those using the Blue Gene/L and optimizing user applications. Both the Catalyst and Applications Performance Engineering and Data Analytics (APEDA) teams support the users projects. In addition to working with scientists running experiments on the Blue Gene/L, we have become a nexus for the broader global community. In partnership with the Mathematics and Computer Science Division at Argonne National Laboratory, we have created an environment where the world's most challenging computational science problems can be addressed. Our expertise in high-end scientific computing enables us to provide

Betting on better scientific literacy

CERN Multimedia

Daisy Yuhas

Dmitry Zimin, founder of the Russian philanthropic foundation Dynasty, visited CERN on 23 October. Zimin, who is himself a scientist and businessman, founded Dynasty in order to support scientific education and a greater public understanding of scientific thinking. Zimin met the Bulletin to reflect on the experience and what had interested him about CERN. Zimin, who had read about and researched CERN before his visit, felt prepared for the physics at CERN but was greatly impressed by the collaborative “brainforce.” He observed that “The organization of all of these people is not less important as an achievement than all of the technical achievements, the collider, the experiments.” He was amazed at “how CERN has been able to organize such a grand collaboration of different people from different institutes of countries from all over the world.” At the core of the Dynasty Foundation’s ideals is the dissemination of scientific thought. Zimin ...

CERN Library - Scientific journal cancellations

CERN Multimedia

2004-01-01

Due to the constant increase of the subscription costs of scientific journals and the current budget restrictions, the Scientific Information Policy Board has mandated the Working Group for Acquisitions (WGA) together with the Library to propose a list of titles to be cancelled at the end of 2004. As a first step, the WGA has identified the scientific journals listed at the web site below as candidates for cancellation. The choice has been guided by the personal experience of the WGA members, consultation of other expert CERN staff for highly specialized titles, and by criteria such as subscription price, impact factor, and - where available - access statistics for electronic journals. The list also accounts for the fact that many titles are subscribed to in 'packages' such that a cancellation of individual titles would not lead to any cost savings. We invite users to carefully check the list on the Library homepage (http://library.cern.ch/). If you find any title that you consider critically important for y...

Scientific publications in Nepal.

Science.gov (United States)

Magar, A

2012-09-01

Scientific publications have become a mainstay of communication among readers, academicians, researchers and scientists worldwide. Although, its existence dates back to 17 th century in the West, Nepal is still struggling to take few steps towards improving its local science for last 50 years. Since the start of the first medical journal in 1963, the challenges remains as it were decades back regarding role of authors, peer reviewers, editors and even publishers in Nepal. Although, there has been some development in terms of the number of articles being published and appearances of the journals, yet there is a long way to go. This article analyzes the past and present scenario, and future perspective for scientific publications in Nepal.

Taiwan Government’s scientific journal supporting policy

Directory of Open Access Journals (Sweden)

Hsiu-Ching Hsu

2016-08-01

Full Text Available This report discloses the journal supporting policy in Taiwan. At the moment, the Ministry of Science and Technology (MOST not only gives financial support to each academic research projects but also plays an important role to the quality of many scientific journals. The MOST has established a competitive evaluation system to assess the quality of scientific journals. According to the policy of MOST, each academic association could apply financial support for one scientific journal. Around 60 journals receive support from MOST every year.

Documenta Mathematica A Community-Driven Scientific Journal

CERN Document Server

Rehmann, U

2003-01-01

Documenta Mathematica is an electronically produced, peer-reviewed, scientific journal, founded in 1996 by the German Mathematical Society (DMV). It is produced and distributed without any commercial publisher. Its foundation was one of the responses of the scientific community in order to cope with the ever increasing prices of scientific journals. Since May 1996, Documenta Mathematica is freely available on the Internet, and printed versions of its annual volumes are available at low cost. In this article we describe its management and its 'business model'.

Toward fostering the scientific and technological literacy establishment of the 'Central Scientific and Technological Museum-Institute' and nuclear development

Energy Technology Data Exchange (ETDEWEB)

Murata, Takashi [Graduate School of Energy Sci., Kyoto Univ., Kyoto (Japan)

1999-12-01

The public in general does not necessarily have enough knowledge for the reasonable decision making in the application of scientific and technological development even in the ear of the Information Society. However strongly the necessity of the consensus in the scientific policy like nuclear R and D is required, it is impossible to attain the goal, unless the scientific literacy of the general public is. In order to improve it the role of the scientific museum as a social educational facility is very important. In this respect, there still remains vast room to improve in the Japanese museum system and its activities. The concept of the 'Central Scientific and Technological Museum-Institute', which also operates very small-sized reactor for the educational use, is developed in this paper. (author)

Assessing Scientific Performance.

Science.gov (United States)

Weiner, John M.; And Others

1984-01-01

A method for assessing scientific performance based on relationships displayed numerically in published documents is proposed and illustrated using published documents in pediatric oncology for the period 1979-1982. Contributions of a major clinical investigations group, the Childrens Cancer Study Group, are analyzed. Twenty-nine references are…

General outline of scientific programme for 1971

CERN Multimedia

1971-01-01

A description of the 1971 scientific and technical programme at CERN was prepared for the Scientific Policy Committee and was used to accompany the budget document. The opening chapter is reproduced here with a few minor modifications.

Scientific ballooning. Proceedings. PSB Meeting of the COSPAR Panel on Technical Problems Related to Scientific Ballooning which was held during the Thirtieth COSPAR Scientific Assembly, Hamburg (Germany), 11 - 21 Jul 1994.

Science.gov (United States)

Riedler, W.; Torkar, K.

1996-05-01

This issue is grouped into sections on materials, design, performance and analysis of balloons, reviews of major national and international balloon programmes, novel instrumentation and systems for scientific ballooning, and selected recent scientific observations.

Things to see and do: how scientific images work

DEFF Research Database (Denmark)

Kjærgaard, Rikke Schmidt

2011-01-01

Visual representations are an important and integral part of understanding and developing new scientific concepts – both in the laboratory and when engaging a public audience. Images often serve as the primary evidence supporting the claims of the scientific publication (Goodsell & Johnson, 2007...... a broad range of scientific areas, visual approaches and imaging technologies. It explores the way we look at scientific data, why some representations are better than others, and what you can do to achieve clarity, accuracy and aesthetic appearance in a visual representation that will represent your...... scientific data in the best possible way....

Queen's discovery lauded by top scientific journal

CERN Multimedia

McGrady, S

2002-01-01

A scientific breakthrough at Queen's University's Sudbury Neutrino Observatory has received major international recognition. The journal Science ranked the discovery that cracked the "neutrino problem" second, in the journal's top 10 scientific achievements of 2002 (1/2 page).

Collaborative e-Science Experiments and Scientific Workflows

NARCIS (Netherlands)

Belloum, A.; Inda, M.A.; Vasunin, D.; Korkhov, V.; Zhao, Z.; Rauwerda, H.; Breit, T.M.; Bubak, M.; Hertzberger, L.O.

2011-01-01

Recent advances in Internet and grid technologies have greatly enhanced scientific experiments' life cycle. In addition to compute- and data-intensive tasks, large-scale collaborations involving geographically distributed scientists and e-infrastructure are now possible. Scientific workflows, which

The NRPB future scientific programme (2002-2007)

International Nuclear Information System (INIS)

2002-01-01

This paper provides a detailed summary of the work planned for the lifetime of the Corporate Plan (2002-2007). Some of the work relates to new technologies, other work arises from challenges to accepted standards or because of new information from research. The Scientific Programme is set in the context of NRPB effort in the international arena to develop and address radiation issues and standards. This work pervades and influences aspects of the work programme in all of the scientific areas. The globally recognised expertise of NRPB can influence developments to ensure UK concerns are addressed and the UK research programmes meshes with international and collaborative research. The Scientific Programme is in line with the role of NRPB, our stated methods of working and the priorities identified by the 1999-2000 Strategic Review, Government Departments, Devolved Administrations and Agencies and the views of Board members. The future Scientific Programme spans the three principal functions of advice, research and the provision of technical services and draws on expertise from across the organisation. The Department of Health is responsible for ministerial approval of the Corporate Plan and Scientific Programme. (author)

The configuration of the Brazilian scientific field.

Science.gov (United States)

Barata, Rita B; Aragão, Erika; de Sousa, Luis E P Fernandes; Santana, Taris M; Barreto, Mauricio L

2014-03-01

This article describes the configuration of the scientific field in Brazil, characterizing the scientific communities in every major area of knowledge in terms of installed capacity, ability to train new researchers, and capacity for academic production. Empirical data from several sources of information are used to characterize the different communities. Articulating the theoretical contributions of Pierre Bourdieu, Ludwik Fleck, and Thomas Kuhn, the following types of capital are analyzed for each community: social capital (scientific prestige), symbolic capital (dominant paradigm), political capital (leadership in S & T policy), and economic capital (resources). Scientific prestige is analyzed by taking into account the volume of production, activity index, citations, and other indicators. To characterize symbolic capital, the dominant paradigms that distinguish the natural sciences, the humanities, applied sciences, and technology development are analyzed theoretically. Political capital is measured by presidency in one of the main agencies in the S & T national system, and research resources and fellowships define the economic capital. The article discusses the composition of these different types of capital and their correspondence to structural capacities in various communities with the aim of describing the configuration of the Brazilian scientific field.

Scientific wealth and inequality within nations

OpenAIRE

Prathap, Gangan

2017-01-01

We show that the greater the scientific wealth of a nation, the more likely that it will tend to concentrate this excellence in a few premier institutions. That is, great wealth implies great inequality of distribution. The scientific wealth is interpreted in terms of citation data harvested by Google Scholar Citations for profiled institutions from all countries in the world.

Social behavioural epistemology and the scientific community.

Science.gov (United States)

Watve, Milind

2017-07-01

The progress of science is influenced substantially by social behaviour of and social interactions within the scientific community. Similar to innovations in primate groups, the social acceptance of an innovation depends not only upon the relevance of the innovation but also on the social dominance and connectedness of the innovator. There are a number of parallels between many well-known phenomena in behavioural evolution and various behavioural traits observed in the scientific community. It would be useful, therefore, to use principles of behavioural evolution as hypotheses to study the social behaviour of the scientific community. I argue in this paper that a systematic study of social behavioural epistemology is likely to boost the progress of science by addressing several prevalent biases and other problems in scientific communication and by facilitating appropriate acceptance/rejection of novel concepts.

Identifying Strategic Scientific Opportunities

Science.gov (United States)

As NCI's central scientific strategy office, CRS collaborates with the institute's divisions, offices, and centers to identify research opportunities to advance NCI's vision for the future of cancer research.

Authorship for scientific papers: the new challenges.

Science.gov (United States)

Garcia, Carla Costa; Martrucelli, Cristina Ribeiro Nabuco; Rossilho, Marilisa de Melo Freire; Denardin, Odilon Victor Porto

2010-01-01

The dissemination of the practice of collaborative authorship (coauthorship) in Brazil and in the international scientific community has been accompanied by an increasing occurrence of frauds, manipulations and other deviations in the assignment of responsibility for a scientific paper. This article discusses the criteria for authorship attribution, the reasons for the growing indices of coauthorship and the challenges to determine authorship in electronic journals. Through literature review and case study (bibliographic search in scientific database), it shows ways to avoid that "misbehaviors" related to the authorship attribution affect the credibility of science.

Scientific Report 2001

International Nuclear Information System (INIS)

2002-04-01

The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2001. The report discusses progress and main achievements in four principal areas: Radiation Protection, Radioactive Waste and Clean-up, Reactor Safety and the BR2 Reactor

Scientific Report 2001

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-04-01

The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2001. The report discusses progress and main achievements in four principal areas: Radiation Protection, Radioactive Waste and Clean-up, Reactor Safety and the BR2 Reactor.

The reading of scientific texts: questions on interpretation and evaluation, with special reference to the scientific writings of Ludwik Fleck.

Science.gov (United States)

Hedfors, Eva

2007-03-01

Ludwik Fleck is remembered for his monograph published in German in 1935. Reissued in 1979 as Genesis and development of a scientific fact Fleck's monograph has been claimed to expound relativistic views of science. Fleck has also been portrayed as a prominent scientist. The description of his production of a vaccine against typhus during World War II, when imprisoned in Buchenwald, is legendary in the scholarly literature. The claims about Fleck's scientific achievements have been justified by referring to his numerous publications in international scientific journals. Though frequently mentioned, these publications have scarcely been studied. The present article discusses differences in interpretation and evaluation of science in relation to the background of the interpreters. For this purpose Fleck's scientific publications have been scrutinized. In conjunction with further sources reflecting the desperate situation at the time in question, the results of the study account for a more restrained picture of Fleck's scientific accomplishments. Furthermore, based on the review of the latter, certain demands characterizing good science could be articulated. The restricted possibilities of those not trained in science or not possessing field specific knowledge, evaluating science are discussed, as are also formal aspects of scientific papers and questions related to research ethics.

Profile and scientific production of Brazilian National Council of Technological and Scientific Development researchers in Pediatrics.

Science.gov (United States)

Oliveira, Maria Christina L; Martelli, Daniella Reis B; Pinheiro, Sergio Veloso; Miranda, Debora Marques; Quirino, Isabel Gomes; Leite, Barbara Gusmão L; Colosimo, Enrico Antonio; e Silva, Ana Cristina S; Martelli-Júnior, Hercílio; Oliveira, Eduardo Araujo

2013-09-01

To evaluate the profile and the scientific production of researchers in Pediatrics with scholarship from the National Counsel of Technological and Scientific Development. The Lattes curricula of 34 researchers in Pediatrics with active scholarships, from 2006 to 2008 were included in the analysis. The variables of interest were: gender, affiliation, time since PHD, tutoring of undergraduate students, mentorship of masters and doctors, scientific production and the papers' impact. In a total of 411 researchers in Medicine, 34 (8%) belonged to Pediatrics. Males (77%) and scholars in the category 2 of productivity (62%) prevailed. Three states of Brazil were responsible for approximately 90% of the researchers: São Paulo (53%), Minas Gerais (21%), and Rio Grande do Sul (15%). During their academic career, the Pediatrics researchers have published 3,122 articles with a median of 89 articles per researcher (interquartile range - IQ=51-119). Of the total, 40 and 59% articles were indexed in the Web of Science and Scopus databases, respectively. The Pediatrics researchers have published papers in 599 journals with a median impact factor of 2.35 (IQ=1.37-3.73) for the 323 indexed journals. The Pediatrics researchers have a relevant scientific output from the quantity point of the view, but there is a need to improve quality.

The role of scientific institutions

International Nuclear Information System (INIS)

Gonzalez, A.J.

2002-01-01

The topic that was requested to address at this Nea seminar is the role (i.e., what is expected to be done) by institutions (i.e., organisations for the promotion of a public object) of a scientific nature (assisted by expert knowledge), with regard to a better integration of radiation protection in modern society. The scientific radiation protection institutions at an international level are the I.C.R.P. (non governmental), UNSCEAR (governmental) and the IAEA, acting together as an international forum. They are the focus of this paper. (N.C.)

Understanding the Impact of an Apprenticeship-Based Scientific Research Program on High School Students' Understanding of Scientific Inquiry

Science.gov (United States)

Aydeniz, Mehmet; Baksa, Kristen; Skinner, Jane

2011-01-01

The purpose of this study was to understand the impact of an apprenticeship program on high school students' understanding of the nature of scientific inquiry. Data related to seventeen students' understanding of science and scientific inquiry were collected through open-ended questionnaires. Findings suggest that although engagement in authentic…

Scientific and Technological Facilities in CIEMAT

International Nuclear Information System (INIS)

Vaquero Ortiz, E. M.

2012-01-01

The precise knowledge of the available Resources in an Organization, regardless the work it carries out, is an essential strategic enable to achieve its goals. Material Resources are part of the resources in an organization, The Material Resources expression includes a wide span of elements, because a Material Resource, as a generic concept, is each and every specific physical mean, utilised to get any of the Organization objectives. In case of CIEMAT, as Public Research Agency, its Material Resources consists of its scientific and technological facilities. These resources are the basis of this Agency numerous amount of technical capabilities, allowing it to carry out its research, development and innovation activity to transfer its results to the society later. This report is a summary on CIEMAT scientific and technological facilities, whose spread can help to show its scientific and technological capabilities, to enable the execution of a wide variety of projects and to open new external cooperation channels. In that list its possible to find the two Unique Scientific and Technological Infrastructures (ICTS) in Spain which are hold by CIEMAT and the Ionizing Radiations Metrology Laboratory (LMRI) which is the Spanish National Standards Laboratory for ionising radiations. (Author)

Scientific and Technological Facilities in CIEMAT

International Nuclear Information System (INIS)

Vaquero Ortiz, E. M.; Cascante Díaz, E.; González Pineda, L. M.

2015-01-01

The precise knowledge of the available Resources in an Organization, regardless the work it carries out, is an essential strategic enabler to achieve its goals. Material Resources are part of the resources in an organization, The “Material Resources” expression includes a wide span of elements, because a Material Resource, as a generic concept, is each and every specific physical mean, utilized to get any of the Organization objectives. In CIEMAT, as Public Research Agency, its Material Resources consist of its scientific and technological facilities. These resources are the basis of this Agency numerous amount of technical capabilities, allowing it to carry out its research, development and innovation activity to transfer its results to the society later. This report is a summary on CIEMAT scientific and technological facilities, whose spread can help to show its scientific and technological capabilities, to enable the execution of a wide variety of projects and to open new external cooperation channels. Outstanding among these facilities are two “Unique Scientific and Technological Infrastructures” (ICTS) and the Ionizing Radiations Metrology Laboratory (LMRI) which is the Spanish National Standards Laboratory for ionising radiations.

1999 scientific evaluation at the CEA

International Nuclear Information System (INIS)

1999-01-01

This report presents a statement of the scientific and technical activity of the French atomic energy commission (CEA) for the year 1999. This evaluation is made by external and independent experts and requires some specific dispositions for the nuclear protection and safety institute (IPSN) and for the direction of military applications (DAM). The report is divided into 4 parts dealing successively with: 1)the CEA, a public research organization (strategy, research programs, new organization of the CEA activities, civil nuclear research, technology research and transfer, defence activities, transfer of knowledge) 2)the scientific evaluation at the CEA (evaluations of the civil applications of the CEA, IPSN, DAM, INSTN (national institute for nuclear sciences and techniques) 3)synthesis of the 1999 scientific and technical evaluation for each operational directions of the CEA (directions of fuel cycle, of nuclear reactors, of advanced technologies, of materials sciences, of life sciences, of military applications, of the nuclear protection and safety institute and of the national institute for nuclear sciences and techniques) 4)the corresponding members of the evaluation and the list of scientific and technical councils and members

Research governance and scientific knowledge production in The Gambia

Directory of Open Access Journals (Sweden)

Frederick U. Ozor

2014-09-01

Full Text Available Public research institutions and scientists are principal actors in the production and transfer of scientific knowledge, technologies and innovations for application in industry as well for social and economic development. Based on the relevance of science and technology actors, the aim of this study was to identify and explain factors in research governance that influence scientific knowledge production and to contribute to empirical discussions on the impact levels of different governance models and structures. These discussions appear limited and mixed in the literature, although still are ongoing. No previous study has examined the possible contribution of the scientific committee model of research governance to scientific performance at the individual level of the scientist. In this context, this study contributes to these discussions, firstly, by suggesting that scientific committee structures with significant research steering autonomy could contribute not only directly to scientific output but also indirectly through moderating effects on research practices. Secondly, it is argued that autonomous scientific committee structures tend to play a better steering role than do management-centric models and structures of research governance.

The economic scientific research, a production neo-factor

Directory of Open Access Journals (Sweden)

Elena Ciucur

2007-12-01

Full Text Available The scientific research represents a modern production neo-factor that implies two groups of coordinates: preparation and scientific research. The scientific research represents a complex of elements that confer a new orientation of high performance and is materialized in resources and new availabilities brought in active shape by the contribution of the creators and by the attraction in a specific way in the economic circuit. It is the creator of new ideas, lifting the performance and understanding to the highest international standards of competitive economic efficiency. In the present, the role of the scientific research stands before some new challenges generated by the stage of society. It.s propose a unitary, coherent scientific research and educational system, created in corresponding proportions, based on the type, level and utility of the system, by the state, the economic-social environment and the citizen himself.

Scientific Programming in Fortran

Directory of Open Access Journals (Sweden)

W. Van Snyder

2007-01-01

Full Text Available The Fortran programming language was designed by John Backus and his colleagues at IBM to reduce the cost of programming scientific applications. IBM delivered the first compiler for its model 704 in 1957. IBM's competitors soon offered incompatible versions. ANSI (ASA at the time developed a standard, largely based on IBM's Fortran IV in 1966. Revisions of the standard were produced in 1977, 1990, 1995 and 2003. Development of a revision, scheduled for 2008, is under way. Unlike most other programming languages, Fortran is periodically revised to keep pace with developments in language and processor design, while revisions largely preserve compatibility with previous versions. Throughout, the focus on scientific programming, and especially on efficient generated programs, has been maintained.

Collaboration in scientific practice

DEFF Research Database (Denmark)

Wagenknecht, Susann

2014-01-01

This monograph investigates the collaborative creation of scientific knowledge in research groups. To do so, I combine philosophical analysis with a first-hand comparative case study of two research groups in experimental science. Qualitative data are gained through observation and interviews......, and I combine empirical insights with existing approaches to knowledge creation in philosophy of science and social epistemology. On the basis of my empirically-grounded analysis I make several conceptual contributions. I study scientific collaboration as the interaction of scientists within research...... to their publication. Specifically, I suggest epistemic difference and the porosity of social structure as two conceptual leitmotifs in the study of group collaboration. With epistemic difference, I emphasize the value of socio-cognitive heterogeneity in group collaboration. With porosity, I underline the fact...

Exploration and thinking of dynamic scientific and technical intelligence research

International Nuclear Information System (INIS)

Zhang Xupu; Xia Yun

2014-01-01

This article discusses the concept and types of dynamic scientific and technical intelligence, describes the characteristics and role of dynamic scientific and technical intelligence, and analyzes methods and procedures of dynamic scientific and technical intelligence research. Combined with the status quo of dynamic scientific and technical intelligence research in library of China Institute of Atomic Energy, this article makes some suggestions for strengthening dynamic scientific and technical intelligence research. (authors)

Evaluation of Scientific Journal Validity, It's Articles and Their Authors.

Science.gov (United States)

Masic, Izet; Begic, Edin

2016-01-01

The science that deals with evaluation of a scientific article refer to the finding quantitative indicators (index) of the scientific research success is called scientometrics. Scientometrics is part of scientology (the science of science) that analyzes scientific papers and their citations in a selected sample of scientific journals. There are four indexes by which it is possible to measure the validity of scientific research: number of articles, impact factor of the journal, the number and order of authors and citations number. Every scientific article is a record of the data written by the rules recommended by several scientific associations and committees. Growing number of authors and lot of authors with same name and surname led to the introduction of the necessary identification agent - ORCID number.

Study of Scientific Problem-Solving Abilities Based on Scientific Knowledge about Atmosphere and Weather for Seventh Grade Students

Directory of Open Access Journals (Sweden)

Phoorin Thaengnoi

2017-06-01

Full Text Available The purposes of this research were: 1 to develop scientific problem-solving abilities test based on scientific knowledge about atmosphere and weather for seventh grade students and 2 to study the scientific problem-solving abilities of seventh grade students. The samples used in this study were 47 students who were studying in seventh grade in academic year 2015 of a school in Chai Nat province, Thailand. Purposive sampling was applied for identifying the samples. The research instrument of this study was the scientific problem-solving abilities test developed by the researcher. The research data was analyzed by comparing students’ scores with the criteria and considering students’ answers in each element of scientific problem-solving abilities. The results of the study were as follows: The scientific problem-solving abilities test composed of 2 parts. The first part was multiple-choice questions which was composed of 4 situations, a total of 20 questions. The Index of Item Objective Congruence of this part was varied in the range between 0.67 – 1.00. The difficulty and the discrimination level were in the range between 0.33 – 0.63 and 0.27 – 0.67, respectively. The reliability levels of this part was equal to 0.81. The second part of the test was subjective questions which composed of 2 situations, a total of 10 questions. The Index of Item Objective Congruence of this part was varied in the range between 0.67 – 1.00. The reliability level of this part was equal to 0.83. Besides, all questions in the test were covered all elements of scientific problem-solving abilities ; 1 identifying the problem 2 making the hypothesis 3 collecting data and knowledge to solve the problem 4 identifying problem-solving method and 5 predicting the characteristics of the results. The problem-solving abilities of the students revealed that 40.43% of students (n=19 were in a moderate level and 59.57% of students (n=28 were in a low level with the

Scientific activities in and about Greenland

DEFF Research Database (Denmark)

Graversen, Ebbe Krogh; Pedersen, Asger Dalsgaard

2018-01-01

This report presents the results of an investigation and analysis of opportunities, strengths and challenges of scientific activities involving Greenland as a research area or research object relative to other Arctic areas.......This report presents the results of an investigation and analysis of opportunities, strengths and challenges of scientific activities involving Greenland as a research area or research object relative to other Arctic areas....

3D Scientific Visualization with Blender

Science.gov (United States)

Kent, Brian R.

2015-03-01

This is the first book written on using Blender for scientific visualization. It is a practical and interesting introduction to Blender for understanding key parts of 3D rendering and animation that pertain to the sciences via step-by-step guided tutorials. 3D Scientific Visualization with Blender takes you through an understanding of 3D graphics and modelling for different visualization scenarios in the physical sciences.

Studying Scientific Discovery by Computer Simulation.

Science.gov (United States)

1983-03-30

Mendel’s laws of inheritance, the law of Gay- Lussac for gaseous reactions, tile law of Dulong and Petit, the derivation of atomic weights by Avogadro...neceseary mid identify by block number) scientific discovery -ittri sic properties physical laws extensive terms data-driven heuristics intensive...terms theory-driven heuristics conservation laws 20. ABSTRACT (Continue on revere. side It necessary and identify by block number) Scientific discovery

Maximizing scientific knowledge from randomized clinical trials

DEFF Research Database (Denmark)

Gustafsson, Finn; Atar, Dan; Pitt, Bertram

2010-01-01

Trialists have an ethical and financial responsibility to plan and conduct clinical trials in a manner that will maximize the scientific knowledge gained from the trial. However, the amount of scientific information generated by randomized clinical trials in cardiovascular medicine is highly vari...

PUBLICATION OF SCIENTIFIC PERIODICALS AT UNIVERSITIES:NEW CHALLENGES, PARTICIPANTS TECHNOLOGY

Directory of Open Access Journals (Sweden)

T. О. Kolesnykova

2015-11-01

Full Text Available Purpose. Publication of scientific periodicals in the Universities is very important and necessary element in the infrastructure of scientific communication. The aim of the article is: 1 providing a new model of publication system of the University scientific periodicals (on the example of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan – DNURT; 2 studying the peculiarities of the «Library publishing» model (Library Publishing and library as a new participant in the publication of world scientific periodicals of the University; 3 description of the developed software automation typesetting of scientific articles and their integration into international databases of scientific and technical information. Methodology. The scientists investigated: 1 the system of publication of scientific periodicals at DNURT; 2 integration system of electronic versions of periodicals and individual articles of scientists from DNURT into the world scientific databases; 3 publishing activity of the scientific and technical library of the University. Findings. The authors proved the need for the fast updates in each higher education institution of Ukrainian management system of scientific periodicals and the creation of the periodicals development concept. The conditions for the occurrence of positive changes in the publishing process in Universities were determined and named as a new participant in these processes – University library. The list of new tasks inherent in the scientific periodicals of the Universities was presented. The software product «Digital designer» was created as a new applied information technology solution to extend the functionality of the basic system information of the publication according to its editorial policy. Originality. The scientists studied the transformation process of the organizational structure of scientific periodicals publishing in the Universities of Ukraine and the world

1997 Scientific Report[1997 Scientific Report of the Belgian Nuclear Research Centre

Energy Technology Data Exchange (ETDEWEB)

Govaerts, P

1998-07-01

The 1997 Scientific Report of the Belgian Nuclear Research Centre SCK-CEN describes progress achieved in nuclear safety, radioactive waste management, radiation protection and safeguards. In the field of nuclear research, the main projects concern the behaviour of high-burnup and MOX fuel, the embrittlement of reactor pressure vessels, the irradiation-assisted stress corrosion cracking of reactor internals, and irradiation effects on materials of fusion reactors. In the field of radioactive waste management, progress in the following domains is reported: the disposal of high-level radioactive waste and spent fuel in a clay formation, the decommissioning of nuclear installations, the study of alternative waste-processing techniques. For radiation protection and safeguards, the main activities reported on are in the field of site and environmental restoration, emergency planning and response and scientific support to national and international programmes.

Developments in scientific communication: considerations on the value chain

NARCIS (Netherlands)

Geurts, Petrus A.T.M.; Roosendaal, Hans E.; van der Vet, P.E.

2001-01-01

This article analyses the transformation of the value chain of scientific information in response to concomitant changes in scientific research and education. The scientific communication market is described in terms of main driving forces and their interplay. These forces are the actor

Lexical Features of Scientific Discourse

Directory of Open Access Journals (Sweden)

Tatjana Rusko

2014-06-01

Full Text Available Currently, a lot of emphasis is placed of the ability of a person to successfully communicate in any sphere of activity, which along with upbringing and education is among the factors that determine a person’s culture. In the context of rapid scientific and technological progress, it is vital to constantly exchange relevant infor- mation. The effectiveness of this process relies not only on the proficient knowledge of the subject and the ability to make grammatically correct sentences, but to a large extent on the level of competence in scientific language. The present article attempts to consider the interaction of discourse and vocabulary, different types of cognitive phenomena responsible for the use of a language in real time and related to the language as a means of storing and organising information. Analysing and classifying some key elements of a scientific discourse lexicon contributes to the development of certain provisions of lexicology, functional stylistics, cognitive linguistics and terminology. The results of the analysis may be advantageous both to linguistics and teaching the language for specific purposes.

Ethics of reviewing scientific publications.

Science.gov (United States)

Napolitani, Federica; Petrini, Carlo; Garattini, Silvio

2017-05-01

The approval or rejection of scientific publications can have important consequences for scientific knowledge, so considerable responsibility lies on those who have to assess or review them. Today it seems that the peer review process, far from being considered an outdated system to be abandoned, is experiencing a new upturn. This article proposes criteria for the conduct of reviewers and of those who select them. While commenting on new emerging models, it provides practical recommendations for improving the peer-review system, like strengthening the role of guidelines and training and supporting reviewers. The process of peer review is changing, it is getting more open and collaborative, but those same ethical principles which guided it from its very origin should remain untouched and be firmly consolidated. The paper highlights how the ethics of reviewing scientific publications is needed now more than ever, in particular with regard to competence, conflict of interest, willingness to discuss decisions, complete transparency and integrity. Copyright © 2016 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

Scientific progress without increasing verisimilitude: In response to Niiniluoto.

Science.gov (United States)

Rowbottom, Darrell P

2015-06-01

First, I argue that scientific progress is possible in the absence of increasing verisimilitude in science's theories. Second, I argue that increasing theoretical verisimilitude is not the central, or primary, dimension of scientific progress. Third, I defend my previous argument that unjustified changes in scientific belief may be progressive. Fourth, I illustrate how false beliefs can promote scientific progress in ways that cannot be explicated by appeal to verisimilitude. Copyright © 2015 Elsevier Ltd. All rights reserved.

Cloud Data Storage Federation for Scientific Applications

NARCIS (Netherlands)

Koulouzis, S.; Vasyunin, D.; Cushing, R.; Belloum, A.; Bubak, M.; an Mey, D.; Alexander, M.; Bientinesi, P.; Cannataro, M.; Clauss, C.; Costan, A.; Kecskemeti, G.; Morin, C.; Ricci, L.; Sahuquillo, J.; Schulz, M.; Scarano, V.; Scott, S.L.; Weidendorfer, J.

2014-01-01

Nowadays, data-intensive scientific research needs storage capabilities that enable efficient data sharing. This is of great importance for many scientific domains such as the Virtual Physiological Human. In this paper, we introduce a solution that federates a variety of systems ranging from file

Scientific revolution, incommensurability and truth in theories ...

African Journals Online (AJOL)

Scientific revolution, incommensurability and truth in theories: objection to Kuhn's perspective. ... AFRREV STECH: An International Journal of Science and Technology ... The core of our discussion is, ultimately, to provide a clearer and broader picture of the general characteristics of scientific revolution or theory change.

The Innocence of Scientific »Truths«

Directory of Open Access Journals (Sweden)

Metka Mencin Čeplak

2013-03-01

Full Text Available The article presents a case of »scientific« argument supporting racism in psychology (»Cattell controversy«. The author argues that scientific racism in psychology should not be considered as an excess but rather as a symptom. It is not limited to a few cases of eugenicist and evolutionary psychologists; it is closely tied to the genetic reductionist concept of a person and of psychological differences, and to the role of psychological knowledge in (bio power relations. It concludes with comments on the social responsibility of scientists and points out that scientific conclusions cannot be detached from their effects.

The role of data in scientific progress

International Nuclear Information System (INIS)

Glaeser, P.S.

1985-01-01

This book contains 109 papers presented at the 9th Int. CODATA Conference and illustrates two main themes (1) new computer-based methods for storing, manipulating and disseminating scientific and technical data, and (2) the use of such computerized data files to give new scientific insights. The broad range of scientific disciplines covered includes geology and geochemistry, oceanography and ecology, molecular biology and biotechnology, chemical engineering, materials properties, energy systems, data base design and management - theory and practice, and finally, a last section on data retrieval and library systems. 12 items are included in Atomindex separately. (Auth.)

Dealing with scientific integrity issues: the Spanish experience.

Science.gov (United States)

Puigdomènech, Pere

2014-02-01

Integrity has been an important matter of concern for the scientific community as it affects the basis of its activities. Most countries having a significant scientific activity have dealt with this problem by different means, including drafting specific legal or soft law regulations and the appointment of stable or ad hoc committees that take care of these questions. This has also been the case in Spain. After the period of transition between dictatorship to a democratic regime, and, particularly, after the entrance in the European Union, scientific activity has increased in the country. As it could be expected, problems of misconduct have appeared and different institutions have been dealing with these matters. One of the best examples is that of Consejo Superior de Investigaciones Cientificas (CSIC), the largest institution devoted to scientific research belonging to the Spanish Government. The experience of the CSIC’s Ethics Committee in dealing with conflicts related to scientific practices is discussed here.

Science and society: The benefits of scientific collaboration

CERN Multimedia

2003-01-01

The guest speaker at the next Science and Society symposium is no stranger to CERN. He is, in fact, Sir Chris Llewellyn Smith, Director General of CERN from 1994 to 1998. His topic is one with which he is particularly familiar, having "lived" it throughout his time at CERN: international scientific collaboration and its advantages. International scientific collaboration is essential in a wide range of areas and for a large number of reasons: scientific problems have no frontiers; certain subjects are so complex that they require the expertise of numerous countries; certain types of research, such as that carried out at CERN, cannot be pursued by one nation on its own. However, scientific collaboration is not only beneficial to science itself. This is the point Chris Llewellyn Smith intends to demonstrate in his address. Scientific collaboration can help to build bridges between societies and act as a spur to the development of certain countries. It can even help to diminish conflicts in certain cases. The his...

[Investigation methodology and application on scientific and technological personnel of traditional Chinese medical resources based on data from Chinese scientific research paper].

Science.gov (United States)

Li, Hai-yan; Li, Yuan-hai; Yang, Yang; Liu, Fang-zhou; Wang, Jing; Tian, Ye; Yang, Ce; Liu, Yang; Li, Meng; Sun Li-ying

2015-12-01

The aim of this study is to identify the present status of the scientific and technological personnel in the field of traditional Chinese medicine (TCM) resource science. Based on the data from Chinese scientific research paper, an investigation regarding the number of the personnel, the distribution, their output of paper, their scientific research teams, high-yield authors and high-cited authors was conducted. The study covers seven subfields of traditional Chinese medicine identification, quality standard, Chinese medicine cultivation, harvest processing of TCM, market development and resource protection and resource management, as well as 82 widely used Chinese medicine species, such as Ginseng and Radix Astragali. One hundred and fifteen domain authority experts were selected based on the data of high-yield authors and high-cited authors. The database system platform "Skilled Scientific and Technological Personnel in the field of Traditional Chinese Medicine Resource Science-Chinese papers" was established. This platform successfully provided the retrieval result of the personnel, output of paper, and their core research team by input the study field, year, and Chinese medicine species. The investigation provides basic data of scientific and technological personnel in the field of traditional Chinese medicine resource science for administrative agencies and also evidence for the selection of scientific and technological personnel and construction of scientific research teams.

A tool for public analysis of scientific data

Directory of Open Access Journals (Sweden)

D Haglin

2006-01-01

Full Text Available The scientific method encourages sharing data with other researchers to independently verify conclusions. Currently, technical barriers impede such public scrutiny. A strategy for offering scientific data for public analysis is described. With this strategy, effectively no requirements of software installation (other than a web browser or data manipulation are imposed on other researchers to prepare for perusing the scientific data. A prototype showcasing this strategy is described.

Visualization in scientific computing

National Research Council Canada - National Science Library

Nielson, Gregory M; Shriver, Bruce D; Rosenblum, Lawrence J

1990-01-01

The purpose of this text is to provide a reference source to scientists, engineers, and students who are new to scientific visualization or who are interested in expanding their knowledge in this subject...

Comparative Difficulties with Non-Scientific General Vocabulary and Scientific/Medical Terminology in English as a Second Language (ESL) Medical Students.

Science.gov (United States)

Heming, Thomas A; Nandagopal, Shobha

2012-11-01

Medical education requires student comprehension of both technical (scientific/medical) and non-technical (general) vocabulary. Our experience with "English as a second language" (ESL) Arab students suggested they often have problems comprehending scientific statements because of weaknesses in their understanding of non-scientific vocabulary. This study aimed to determine whether ESL students have difficulties with general vocabulary that could hinder their understanding of scientific/medical texts. A survey containing English text was given to ESL students in the premedical years of an English-medium medical school in an Arabic country. The survey consisted of sample questions from the Medical College Admission Test (USA). Students were instructed to identify all unknown words in the text. ESL students commenced premedical studies with substantial deficiencies in English vocabulary. Students from English-medium secondary schools had a selective deficiency in scientific/medical terminology which disappeared with time. Students from Arabic-medium secondary schools had equal difficulty with general and scientific/medical vocabulary. Deficiencies in both areas diminished with time but remained even after three years of English-medium higher education. Typically, when teaching technical subjects to ESL students, attention is focused on subject-unique vocabulary and associated modifiers. This study highlights that ESL students also face difficulties with the general vocabulary used to construct statements employing technical words. Such students would benefit from increases in general vocabulary knowledge.

Joining of Ukraine to the European scientific and metric systems

Directory of Open Access Journals (Sweden)

O.M. Sazonets

2015-09-01

Full Text Available At the present stage of development it is necessary to form the knowledge which structures knowledge as the object of management. In conditions of technological globalism there are structural changes in the information environment of countries. Scientific metrics is sufficiently developed in other countries, especially in the EU. The article contains the description of the first index calculation system of scientific references called Science Citation Index (SCI. The main advantage of this project was searching for information not only by the author and thematic categories, but also by the list of cited literature. The authors define the scientific and metric base in the following way: scientific and metric database (SMBD is the bibliographic and abstract database with the tools for tracking citations of articles published in scientific journals. The most prominent European scientific and metric bases are examined. The authors show that the bases have the performance assessment tools which track down the impact of scientific papers and publications of individual scientists and research institutions. The state of crisis in scientific and technological activities in Ukraine as well as the economy as a whole, needs immediate organization of national scientific and metric system.

A science confidence gap: Education, trust in scientific methods, and trust in scientific institutions in the United States, 2014.

Science.gov (United States)

Achterberg, Peter; de Koster, Willem; van der Waal, Jeroen

2017-08-01

Following up on suggestions that attitudes toward science are multi-dimensional, we analyze nationally representative survey data collected in the United States in 2014 ( N = 2006), and demonstrate the existence of a science confidence gap: some people place great trust in scientific methods and principles, but simultaneously distrust scientific institutions. This science confidence gap is strongly associated with level of education: it is larger among the less educated than among the more educated. We investigate explanations for these educational differences. Whereas hypotheses deduced from reflexive-modernization theory do not pass the test, those derived from theorizing on the role of anomie are corroborated. The less educated are more anomic (they have more modernity-induced cultural discontents), which not only underlies their distrust in scientific institutions, but also fuels their trust in scientific methods and principles. This explains why this science confidence gap is most pronounced among the less educated.

Effects of Inquiry-Based Agriscience Instruction on Student Scientific Reasoning

Science.gov (United States)

Thoron, Andrew C.; Myers, Brian E.

2012-01-01

The purpose of this study was to determine the effect of inquiry-based agriscience instruction on student scientific reasoning. Scientific reasoning is defined as the use of the scientific method, inductive, and deductive reasoning to develop and test hypothesis. Developing scientific reasoning skills can provide learners with a connection to the…

A Commentary on Innovation and Emerging Scientific Careers: Is Social Work Prepared to Compete in Today's Scientific Marketplace?

Science.gov (United States)

Craddock, Jaih B.

2017-01-01

The aim of this article is to address some of the questions Dr. Paula S. Nurius presents in her article, "Innovation and Emerging Scientific Careers: Is Social Work Prepared to Compete in Today?s Scientific Marketplace?" Specifically, this article will focus on what we can do to better prepare our emerging research scholars to be…

Profile and scientific production of Brazilian National Council of Technological and Scientific Development researchers in Pediatrics

Directory of Open Access Journals (Sweden)

Maria Christina L. Oliveira

2013-09-01

Full Text Available OBJECTIVE: To evaluate the profile and the scientific production of researchers in Pediatrics with scholarship from the National Counsel of Technological and Scientific Development. METHODS: The Lattes curricula of 34 researchers in Pediatrics with active scholarships, from 2006 to 2008 were included in the analysis. The variables of interest were: gender, affiliation, time since PHD, tutoring of undergraduate students, mentorship of masters and doctors, scientific production and the papers' impact. RESULTS: In a total of 411 researchers in Medicine, 34 (8% belonged to Pediatrics. Males (77% and scholars in the category 2 of productivity (62% prevailed. Three states of Brazil were responsible for approximately 90% of the researchers: São Paulo (53%, Minas Gerais (21%, and Rio Grande do Sul (15%. During their academic career, the Pediatrics researchers have published 3,122 articles with a median of 89 articles per researcher (interquartile range - IQ=51-119. Of the total, 40 and 59% articles were indexed in the Web of Science and Scopus databases, respectively. The Pediatrics researchers have published papers in 599 journals with a median impact factor of 2.35 (IQ=1.37-3.73 for the 323 indexed journals. CONCLUSIONS: The Pediatrics researchers have a relevant scientific output from the quantity point of the view, but there is a need to improve quality.

Undergraduate Medical Academic Performance is Improved by Scientific Training

Science.gov (United States)

Zhang, Lili; Zhang, Wei; Wu, Chong; Liu, Zhongming; Cai, Yunfei; Cao, Xingguo; He, Yushan; Liu, Guoxiang; Miao, Hongming

2017-01-01

The effect of scientific training on course learning in undergraduates is still controversial. In this study, we investigated the academic performance of undergraduate students with and without scientific training. The results show that scientific training improves students' test scores in general medical courses, such as biochemistry and…

Sherlock Holmes: scientific detective.

Science.gov (United States)

Snyder, Laura J

2004-09-01

Sherlock Holmes was intended by his creator, Arthur Conan Doyle, to be a 'scientific detective'. Conan Doyle criticized his predecessor Edgar Allan Poe for giving his creation - Inspector Dupin - only the 'illusion' of scientific method. Conan Doyle believed that he had succeeded where Poe had failed; thus, he has Watson remark that Holmes has 'brought detection as near an exact science as it will ever be brought into the world.' By examining Holmes' methods, it becomes clear that Conan Doyle modelled them on certain images of science that were popular in mid- to late-19th century Britain. Contrary to a common view, it is also evident that rather than being responsible for the invention of forensic science, the creation of Holmes was influenced by the early development of it.

Verified scientific findings

International Nuclear Information System (INIS)

Bullinger, M.G.

1982-01-01

In this essay, the author attempts to enlighten the reader as to the meaning of the term ''verified scientific findings'' in section 13, sub-section 1, sentence 2 of the new Chemicals Control Law. The examples given here are the generally accepted regulations in regards to technology (that is sections 7a and 18b of the WHG (law on water economy), section 3, sub-section 1 of the machine- and engine protection laws) and to the status of technology (section 3, sub-section 6 of the BImSchG (Fed. law on prevention of air-borne pollution)), and to the status of science (section 5, sub-section 2 of the AMG (drug legislation). The ''status of science and technology'' as defined in sections 4 ff of the Atomic Energy Law (AtomG) and in sections 3, 4, 12, 2) of the First Radiation Protection Ordinance (1.StrlSch. VO), is also being discussed. The author defines the in his opinion ''dynamic term'' as the generally recognized result of scientific research, and the respective possibilities of practical utilization of technology. (orig.) [de

Nine Criteria for a Measure of Scientific Output

OpenAIRE

Kreiman, Gabriel; Maunsell, John H. R.

2011-01-01

Scientific research produces new knowledge, technologies, and clinical treatments that can lead to enormous returns. Often, the path from basic research to new paradigms and direct impact on society takes time. Precise quantification of scientific output in the short-term is not an easy task but is critical for evaluating scientists, laboratories, departments, and institutions. While there have been attempts to quantifying scientific output, we argue that current methods are not ideal and suf...

WITHER SCIENTIFIC AND TECHNOLOGICAL

African Journals Online (AJOL)

No library or information service and especially in a developing .... Good public relations, consultancy services including bilateral and ... project proposal for the creation of a scientific and technological information ... For example, in 1995 the ...

Communication of geo-scientific safety arguments

International Nuclear Information System (INIS)

Flavelle, P.; Goodwin, B.; Jensen, M.; Linden, R.; Mazurek, M.; Srivastave, M.; Strom, A.; Sudicky, E.; Voinis, S.

2007-01-01

Working Group B addressed the communication of geo-scientific safety arguments through a discussion of practical experience as it related to the methods, types of information and specific arguments found to best communicate geo-scientific concepts and notions of safety with broad audiences including, colleagues, authorities and regulators, political decision makers, academics, and the general public. The following questions were suggested by the programme committee of the AMIGO-2 workshop for discussion by Working Group B with respect to the communication of geo-scientific information and safety arguments: - What is the place of geo-scientific arguments in relation to quantitative and qualitative topics like scenario and FEPs (features, events, processes) assessment, simulated repository evolution, calculated dose or risk impacts, engineering tests of materials, etc., when presenting a safety case to different audiences and with respect to the various stages of the repository programme? (see section 3). - Would we be better off focusing messages to the public on time scales of a few hundred years or a few generations? (see section 4). - How do you handle the fact that geoscience interpretations seldom are unique and data often are open to various interpretations? (see section 5). - How do you handle expert controversy on a specific topic? (see section 6). (authors)

Communicating novel and conventional scientific metaphors

DEFF Research Database (Denmark)

Knudsen, Sanne

2005-01-01

. But we still need empirical studies of the career of metaphors in scientific discourse and of the communicative strategies identifying a given metaphor as either novel or conventional. This paper presents a case study of the discursive development of the metaphor of "the genetic code" from......Metaphors are more popular than ever in the study of scientific reasoning and culture because of their innovative and generative powers. It is assumed, that novel scientific metaphors become more clear and well-defined, as they become more established and conventional within the relevant discourses...... the introduction of the metaphor to it was established as an entire network of interrelated conventional metaphors. Not only do the strategies in communicating the metaphor change as the metaphor becomes more established within the discourse, but the genres in which the metaphor is developed and interpreted...

2005 Annual Scientific Conference. Program and Abstracts

International Nuclear Information System (INIS)

Barborica, Andrei; Bulinski, Mircea; Stefan, Sabina

2005-01-01

Every year the Physics Department of the University of Bucharest organizes the 'Annual Scientific Conference' to present the most interesting scientific results, obtained within the department. This scientific session is opened also to the interested physics researchers from other institutes and universities in the country. This scientific event represents a recognition and a continuation of the prestigious tradition of physics research performed within University. The scientific research in the Physics Department is performed in groups and research centers, the terminal year undergraduate students and graduate students being involved in a high extent in the research works. There are 5 research centers with the status of Center of excellence in research. The long-term strategy adopted by the faculty was focused on developing the scientific research in modern topics of theoretical, experimental and applied physics, as well as in inter-disciplinary fields as biophysics, medical physics, physics and protection of the environment, physics - computer science. Following this strategy, the Faculty of Physics has diversified the research activity, developing new research laboratories and encouraging the academic community to perform modern and competitive research projects. The Faculty of Physics is a partner in many common research programs with prestigious foreign universities and institutes. The 2005 session covered the following 8 topics: 1. Atmosphere and Earth Science; Environment Protection (21 papers); 2. Atomic and Molecular Physics; Astrophysics (12 papers); 3. Electricity and Biophysics (19 papers); 4. Nuclear and Elementary Particles Physics (17 papers); 5. Optics, Spectroscopy, Plasma and Lasers (19 papers); 6. Polymer Physics (10 papers); 7. Solid State Physics and Materials Science (10 papers); 8. Theoretical Physics and Applied Mathematics Seminar (12 papers)

Greenhouse effect: Evolution of scientific message and its transfer

International Nuclear Information System (INIS)

Braicovich, L.; Amman, F.; Pavia Univ.

1991-01-01

The greenhouse effect, not anymore confined to scientific journals, is becoming a policy issue and, possibly, a nightmare in public opinion. In this analysis of the evolution of the scientific message and its transfer to policy makers and public opinion, the paper first considers, in general terms, the more recent trends in related research activity and in the transfer processes of the results. Then, a more detailed examination is made of the progress achieved in the years 1989-1990 through scientific research in various aspects of the greenhouse effect. It is confirmed that, for the time being, the scientific results leave many important points unresolved; policy decisions on the matter cannot therefore rely on present scientific knowledge as if it were firmly established

Center for Technology for Advanced Scientific Component Software (TASCS)

Energy Technology Data Exchange (ETDEWEB)

Damevski, Kostadin [Virginia State Univ., Petersburg, VA (United States)

2009-03-30

A resounding success of the Scientific Discover through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedened computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative hig-performance scientific computing.

Pseudo-Scientific Information: Reasons of Spread and Premises of Vitality

Directory of Open Access Journals (Sweden)

Valdas Pruskus

2011-04-01

Full Text Available The phenomenon of pseudo-scientific information, the reasons of its spread and premises of its vitality are discussed in the paper. Pseudo-scientific information is understandable as an attempt to suit a demand, which exists in society, while providing a simple answer to a question, which an individual or society is concerned about, and that answer is not sustained by scientific research. It is showed that the rise and spread of pseudo-scientific information in society are conditioned by objective reasons. Firstly, the lack of information concerning a subject which is significant for society. Secondly, the lack of information for a particular individual (social group concerning a substantial subject. Thirdly, fast spread of scientific and technical inventions and penetration of technological innovations into various spheres of life the understanding of which demands an appropriate informal “processing”, i e it demands provision in an appropriate form, which is partly provided by pseudo-scientific knowledge.The existence of pseudo-scientific information is determined by the fact that it performs important social functions in society. The existence of pseudo-scientific information by official certified scientific information and the fact, that all social groups are affected to a larger or lesser extent, show its ambivalent power and vitality. On the one part, the roots of its vitality lie in the duality of this phenomenon, where opposite things coexist in a strange way – the truth (scientifically verified propositions and speculations which are based on intuition rather than on scientifically verified facts. On the other part, it is maintained by our permanent wish to get an additional and fresher information, though not totally reliable, while seeking to know universally and better the world around us and its phenomena. While meeting this requirement, a pseudo-scientific information stimulates researchers both to enhance their attempts to

Scientific Report 2004

International Nuclear Information System (INIS)

2005-04-01

The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2004. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

Scientific Report 2004

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-04-01

The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2004. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research.

Scientific Report 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-04-15

The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2005. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research.

Scientific Report 2007

International Nuclear Information System (INIS)

2009-09-01

This annual scientific report gives an concise overview of research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2007. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

Scientific Report 2003

International Nuclear Information System (INIS)

2004-01-01

The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2003. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge, and fusion research

Scientific Report 2005

International Nuclear Information System (INIS)

2006-04-01

The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2005. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

Scientific Report 2006

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-09-15

The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2006. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research.

Scientific Report 2006

International Nuclear Information System (INIS)

2007-09-01

The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2006. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

Scientific Report 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-01-01

The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2003. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge, and fusion research.

1995 Scientific Report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

This annual scientific report of SCK-CEN presents a comprehensive coverage and research activities in the filed of (a) waste and site restoration (b) reactor safety and radiation protection (c) operation of BR2 Materials Testing Reactor and (d) services provided by the center (analysis for characterization of waste packages, nuclear measurements, low-level radioactivity measurements).

Manual for JSSL (JAERI scientific subroutine library)

International Nuclear Information System (INIS)

Inoue, Shuji; Fujimura, Toichiro; Tsutsui, Tsuneo; Nishida, Takahiko

1982-09-01

A manual on revised version of JAERI scientific subroutine library, which is a collection of scientific subroutines developed or modified in JAERI. They are classified into fifteen fields (Special Functions, Linear Problems, Eigenvalue and Eigen vector Problems, Non linear Problems, Mathematical Programming, Extreme Value Problems, Transformations, Functional Approximation Methods, Numerical Differential and Integral Methods, Numerical Differential and Integral Equations, Statistical Functions, Physical Problems, I/O Routines, Plotter Routines, Computer System Functions and Others). Main expansion of this version is in the fields of mathematical programming and statistical functions. The present library may be said to be a comprehensive compilation of scientific subroutines covering almost all the important fields. (author)

Research initiatives for plug-and-play scientific computing

International Nuclear Information System (INIS)

McInnes, Lois Curfman; Dahlgren, Tamara; Nieplocha, Jarek; Bernholdt, David; Allan, Ben; Armstrong, Rob; Chavarria, Daniel; Elwasif, Wael; Gorton, Ian; Kenny, Joe; Krishan, Manoj; Malony, Allen; Norris, Boyana; Ray, Jaideep; Shende, Sameer

2007-01-01

This paper introduces three component technology initiatives within the SciDAC Center for Technology for Advanced Scientific Component Software (TASCS) that address ever-increasing productivity challenges in creating, managing, and applying simulation software to scientific discovery. By leveraging the Common Component Architecture (CCA), a new component standard for high-performance scientific computing, these initiatives tackle difficulties at different but related levels in the development of component-based scientific software: (1) deploying applications on massively parallel and heterogeneous architectures, (2) investigating new approaches to the runtime enforcement of behavioral semantics, and (3) developing tools to facilitate dynamic composition, substitution, and reconfiguration of component implementations and parameters, so that application scientists can explore tradeoffs among factors such as accuracy, reliability, and performance

AGU's Updated Scientific Integrity and Professional Ethics Policy

Science.gov (United States)

McPhaden, M. J.

2017-12-01

AGU'S mission is to promote discovery in Earth and space science for the benefit of humanity. This mission can only be accomplished if all those engaged in the scientific enterprise uphold the highest standards of scientific integrity and professional ethics. AGU's Scientific Integrity and Professional Ethics Policy provides a set of principles and guidelines for AGU members, staff, volunteers, contractors, and non-members participating in AGU sponsored programs and activities. The policy has recently been updated to include a new code of conduct that broadens the definition of scientific misconduct to include discrimination, harassment, and bullying. This presentation provides the context for what motivated the updated policy, an outline of the policy itself, and a discussion of how it is being communicated and applied.

Modelling Scientific Argumentation in the Classroom : Teachers perception and practice

Science.gov (United States)

Probosari, R. M.; Sajidan; Suranto; Prayitno, B. A.; Widyastuti, F.

2017-02-01

The purposes of this study were to investigate teacher’s perception about scientific argumentation and how they practice it in their classroom. Thirty biology teachers in high school participated in this study and illustrated their perception of scientific argumentation through a questionnaire. This survey research was developed to measure teachers’ understanding of scientific argumentation, what they know about scientific argumentation, the differentiation between argument and reasoning, how they plan teaching strategies in order to make students’ scientific argumentation better and the obstacles in teaching scientific argumentation. The result conclude that generally, teachers modified various representation to accommodate student’s active participation, but most of them assume that argument and reasoning are similar. Less motivation, tools and limited science’s knowledge were considered as obstacles in teaching argumentation. The findings can be helpful to improving students’ abilities of doing scientific argumentation as a part of inquiry.

75 FR 52346 - Findings of Scientific Misconduct

Science.gov (United States)

2010-08-25

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Office of the Secretary Findings of Scientific Misconduct... professor of genetics and medical genetics, UW-M, engaged in scientific misconduct while her research was...: Falsified Figures 5A and 5B by reusing figures from two of her earlier published papers and falsely labeling...

Training Packages: The Scientific Management of Education.

Science.gov (United States)

Hunter, John

The theory of scientific management was established as a way to increase workers' productivity. The following are among the key principles underpinning scientific management: task simplification and division of labor boost productivity; management must control the planning of work down to its minutiae; and remuneration should be based on output.…

"The Scientific Method" as Myth and Ideal

Science.gov (United States)

Woodcock, Brian A.

2014-01-01

"The Scientific Method" as it has been portrayed in popular and introductory contexts has been declared a myth. The variation that one finds in introductory presentations of "The Scientific Method" is explained by the fact that there is no canonical account among historians and philosophers of science. What, in particular, is…

Learners' Epistemic Criteria for Good Scientific Models

Science.gov (United States)

Pluta, William J.; Chinn, Clark A.; Duncan, Ravit Golan

2011-01-01

Epistemic criteria are the standards used to evaluate scientific products (e.g., models, evidence, arguments). In this study, we analyzed epistemic criteria for good models generated by 324 middle-school students. After evaluating a range of scientific models, but before extensive instruction or experience with model-based reasoning practices,…

Four stages of a scientific discipline; four types of scientist.

Science.gov (United States)

Shneider, Alexander M

2009-05-01

In this article I propose the classification of the evolutionary stages that a scientific discipline evolves through and the type of scientists that are the most productive at each stage. I believe that each scientific discipline evolves sequentially through four stages. Scientists at stage one introduce new objects and phenomena as subject matter for a new scientific discipline. To do this they have to introduce a new language adequately describing the subject matter. At stage two, scientists develop a toolbox of methods and techniques for the new discipline. Owing to this advancement in methodology, the spectrum of objects and phenomena that fall into the realm of the new science are further understood at this stage. Most of the specific knowledge is generated at the third stage, at which the highest number of original research publications is generated. The majority of third-stage investigation is based on the initial application of new research methods to objects and/or phenomena. The purpose of the fourth stage is to maintain and pass on scientific knowledge generated during the first three stages. Groundbreaking new discoveries are not made at this stage. However, new ways to present scientific information are generated, and crucial revisions are often made of the role of the discipline within the constantly evolving scientific environment. The very nature of each stage determines the optimal psychological type and modus operandi of the scientist operating within it. Thus, it is not only the talent and devotion of scientists that determines whether they are capable of contributing substantially but, rather, whether they have the 'right type' of talent for the chosen scientific discipline at that time. Understanding the four different evolutionary stages of a scientific discipline might be instrumental for many scientists in optimizing their career path, in addition to being useful in assembling scientific teams, precluding conflicts and maximizing

PAUL FEYERABEND ON THE SCIENTIFIC WORLDVIEW: TOWARDS QUESTIONING THE SCIENTIFIC UNIFORMITY

Directory of Open Access Journals (Sweden)

N. I. Petrunok

2014-12-01

Full Text Available The purpose of the following article is to draw attention to main problems of scientific values as they were stated by Paul Feyerabend. Various philosophers and epistemologists have always tried to prove chosen principles and objectives, but only few dared to jeopardize their fundamentals. Stereotypes of searching for ultimate truth ceased to hold; however, scientific coordinates are still not qualified. Underlying ambiguities often remain unarticulated. Among those who ventured to shed light on them were the philosophers of post-positivistic branch. One of those who questioned science values in social, cultural, and philosophical approaches the most rigidly was Paul Feyerabend. By means of typical political concepts (such as ideology and propaganda he detected basic objectives of scientists. Our main methodological tools in this research are comparative analyses of the sources and immanent critique of Feyerabend’s arguments. The scientific novelty is based on our core objective to clarify substantial obstacles for homogeneity of science. Does such homogeneity or unity exist at any level? Feyerabend’s answer is a weak “yes”. He accepts such unity only as a useful assumption or a myth. In one of his latest books, Conquest of Abundance, he calls it a “flag” for the “people doing science.” As Feyerabend diagnosed faults of relativism, instrumentalism, and realism – all of them are threatened by the same menace of being invalid to response the world “at face value” – we have to deal somehow with topics denounced by him. In conclusion, we show important implications for the creation of a specific worldview at the intersection of philosophy and science. Considering a number of negatives, in the article we elicit fruitful ideas of Feyerabend, and contextually question them without resorting to a superficial reproach.

Aspects Regarding the Scientific Production of a University

OpenAIRE

Ionela DUMITRU

2008-01-01

The analysis of the scientific production of a university is a very complex process and it usually refers to the number of articles published in scientific journals. For most analyses, only a small number of journals is taken into consideration. Usually, there are considered the journals indexed in databases like Science Citation Index (Thompson ISI). However, we consider that for a more complex image of the scientific production of a university, we need to take into consideration several asp...

Exploring scientific creativity of eleventh-grade students in Taiwan

Science.gov (United States)

Liang, Jia-Chi

2002-04-01

Although most researchers focus on scientists' creativity, students' scientific creativity should be considered, especially for high school and college students. It is generally assumed that most professional creators in science emerge from amateur creators. Therefore, the purpose of this study is to investigate the relationship between students' scientific creativity and selected variables including creativity, problem finding, formulating hypotheses, science achievement, the nature of science, and attitudes toward science for finding significant predictors of eleventh grade students' scientific creativity. A total of 130 male eleventh-grade students in three biology classes participated in this study. The main instruments included the Test of Divergent Thinking (TDT) for creativity measurement, the Creativity Rating Scale (CRS) and the Creative Activities and Accomplishments Check Lists (CAACL ) for measurement of scientific creativity, the Nature of Scientific Knowledge Scale (NSKS) for measurement of the nature of science, and the Science Attitude Inventory II (SAI II) for measurement of attitudes toward science. In addition, two instruments on measuring students' abilities of problem finding and abilities of formulating hypotheses were developed by the researcher in this study. Data analysis involved descriptive statistics, Pearson product-moment correlations, and stepwise multiple regressions. The major findings suggested the following: (1) students' scientific creativity significantly correlated with some of selected variables such as attitudes toward science, problem finding, formulating hypotheses, the nature of science, resistance to closure, originality, and elaboration; (2) four significant predictors including attitudes toward science, problem finding, resistance to closure, and originality accounted for 48% of the variance of students' scientific creativity; (3) there were big differences between students with a higher and a lower degree of scientific

High-End Scientific Computing

Science.gov (United States)

EPA uses high-end scientific computing, geospatial services and remote sensing/imagery analysis to support EPA's mission. The Center for Environmental Computing (CEC) assists the Agency's program offices and regions to meet staff needs in these areas.

Gaming science: the "Gamification" of scientific thinking.

Science.gov (United States)

Morris, Bradley J; Croker, Steve; Zimmerman, Corinne; Gill, Devin; Romig, Connie

2013-09-09

Science is critically important for advancing economics, health, and social well-being in the twenty-first century. A scientifically literate workforce is one that is well-suited to meet the challenges of an information economy. However, scientific thinking skills do not routinely develop and must be scaffolded via educational and cultural tools. In this paper we outline a rationale for why we believe that video games have the potential to be exploited for gain in science education. The premise we entertain is that several classes of video games can be viewed as a type of cultural tool that is capable of supporting three key elements of scientific literacy: content knowledge, process skills, and understanding the nature of science. We argue that there are three classes of mechanisms through which video games can support scientific thinking. First, there are a number of motivational scaffolds, such as feedback, rewards, and flow states that engage students relative to traditional cultural learning tools. Second, there are a number of cognitive scaffolds, such as simulations and embedded reasoning skills that compensate for the limitations of the individual cognitive system. Third, fully developed scientific thinking requires metacognition, and video games provide metacognitive scaffolding in the form of constrained learning and identity adoption. We conclude by outlining a series of recommendations for integrating games and game elements in science education and provide suggestions for evaluating their effectiveness.

Scientific Staff Attestation in Pedagogic and Psychological Disciplines

Directory of Open Access Journals (Sweden)

D. I. Feldshtein

2012-01-01

Full Text Available The paper is devoted to the quality issue of the research conducted by the candidates for a scientific degree in pedagogy and psychology. The author – Chairman of the Expert Council in Pedagogy and Psychology of the Higher Attestation Commission and Vice President of the Russian Academy of Education –points out once again that awarding the scientific degree involves both the assessment of the research work and validation of the candidate’s contribution to the scientific society: publications, conference and symposium presentations, participation in discussions, etc. The paper exemplifies and analyzes the shortcomings of the thesis research: methodological illiteracy, incorrect wording, irrelevant and narrow themes and hypotheses, obvious borrowing of ideas, lack of novelty. The author lays the blame for the undue level of theses on the candidates for a degree, as well as the expert society – the department and laboratory staff, scientific and dissertation councils, scientific advisors, opponents and consult- ants, and experts of the Higher Attestation Commission. The paper suggests the correcting ways to improve the current situation in theses preparation, its defense and approval. 

Scientific Staff Attestation in Pedagogic and Psychological Disciplines

Directory of Open Access Journals (Sweden)

D. I. Feldshtein

2015-02-01

Full Text Available The paper is devoted to the quality issue of the research conducted by the candidates for a scientific degree in pedagogy and psychology. The author – Chairman of the Expert Council in Pedagogy and Psychology of the Higher Attestation Commission and Vice President of the Russian Academy of Education –points out once again that awarding the scientific degree involves both the assessment of the research work and validation of the candidate’s contribution to the scientific society: publications, conference and symposium presentations, participation in discussions, etc. The paper exemplifies and analyzes the shortcomings of the thesis research: methodological illiteracy, incorrect wording, irrelevant and narrow themes and hypotheses, obvious borrowing of ideas, lack of novelty. The author lays the blame for the undue level of theses on the candidates for a degree, as well as the expert society – the department and laboratory staff, scientific and dissertation councils, scientific advisors, opponents and consult- ants, and experts of the Higher Attestation Commission. The paper suggests the correcting ways to improve the current situation in theses preparation, its defense and approval. 

The Knowledge Management Research of Agricultural Scientific Research Institution

Institute of Scientific and Technical Information of China (English)

2010-01-01

Based on the perception of knowledge management from experts specializing in different fields,and experts at home and abroad,the knowledge management of agricultural scientific research institution can build new platform,offer new approach for realization of explicit or tacit knowledge,and promote resilience and innovative ability of scientific research institution.The thesis has introduced functions of knowledge management research of agricultural science.First,it can transform the tacit knowledge into explicit knowledge.Second,it can make all the scientific personnel share knowledge.Third,it is beneficial to the development of prototype system of knowledge management.Fourth,it mainly researches the realization of knowledge management system.Fifth,it can manage the external knowledge via competitive intelligence.Sixth,it can foster talents of knowledge management for agricultural scientific research institution.Seventh,it offers the decision-making service for leaders to manage scientific program.The thesis also discusses the content of knowledge management of agricultural scientific research institution as follows:production and innovation of knowledge;attainment and organizing of knowledge;dissemination and share of knowledge;management of human resources and the construction and management of infrastructure.We have put forward corresponding countermeasures to further reinforce the knowledge management research of agricultural scientific research institution.

Chemical and ceramic methods for the safe storage of actinides using monazite. 1997 annual progress report

International Nuclear Information System (INIS)

Boatner, L.A.

1997-01-01

'Oak Ridge National Laboratory (ORNL) and the Rockwell Science Center of Thousand Oaks, California, are carrying out a joint investigation of the chemical, physical, thermal, and radiation-resistance properties of the lanthanide orthophosphates (monazites) in both ceramic and single-crystal form with the objective of developing the scientific and technical base required for the application of these materials to the storage or disposal of actinide elements, including plutonium. An additional major objective of the research effort is to investigate the technical and scientific problems associated with the formation of both phase-pure monazite ceramics and multiphase monazite-ceramic composites for waste disposal or waste storage applications. These latter investigations encompass the development of low-temperature chemical synthesis routes for the formation of monoclinic monazite phases and the study of the densification properties of lanthanide orthophosphate powders to produce stable, high-density ceramics. Research Statement This research effort addresses several basic issues associated with the characteristics of lanthanide orthophosphates that make this class of materials extremely attractive candidates for application to the storage of actinide elements in general and plutonium in particular. Additionally, these materials are potentially important refractory ceramics in their own right, and many of the scientific issues addressed in this project are applicable to the development of what will constitute a new, highly stable family of ceramics for applications in a number of energy-related areas.'

geo-scientific indicators for safety

International Nuclear Information System (INIS)

Andersson, J.; Bruno, G.; Deguchi, A.; Fein, E.; Larue, P.J.; Lei, S.; Leung, H.; Norris, S.; Violette, S.; Wollrath, J.

2007-01-01

Working Group A was continuation of Working Group B of AMIGO-1, but participants explored more deeply the issues surrounding geo-scientific indicators for safety. The following outcomes were expected. - List different geo-scientific arguments or indicators for safety (with motivation) for various host rocks and sites. Consider dividing the arguments into those that support isolation or retention and discuss their applicability for different time frames. - What actual measurable field evidence supports these arguments/indicators? - What kind of field evidence would go counter to these safety arguments? - What key messages are the most promising in terms of scientific credibility to contribute to the safety case? Possibly examine the same message but in terms of potential ease of communication. The session started with two introductory presentations: - Following the presentations, in discussion the Working Group listed: - Safety Functions where geo-scientific support is needed; - Commonly used chains of argument for supporting these safety functions; - Whether the applicability of the arguments are host rock or site specific and how they apply for different time frames; - Field evidence or other issues that would go counter to the safety arguments; - Key messages most promising in terms of scientific credibility to contribute to the safety case. Overall it was concluded by the Working Group that: - The most important argument is to present a clear understanding of past geological evolution at the particular site, consistent with the global understanding of geological evolution. Efforts should be made to achieve a broad consensus on this from many independent experts. - The supporting arguments are seldom based on a single piece of evidence. It is the chain of arguments rather than individual arguments that is important. - We are primarily interested in 'reasonable' predictability of the geological system. We recognize that most geological systems evolve with time

Scientific Discoveries the Year I Was Born

Science.gov (United States)

Cherif, Abour

2012-01-01

The author has successfully used a learning activity titled "The Year I Was Born" to motivate students to conduct historical research and present key scientific discoveries from their birth year. The activity promotes writing, helps students enhance their scientific literacy, and also improves their attitude toward the learning of science. As one…

Manual on JSSL (JAERI scientific subroutine library)

International Nuclear Information System (INIS)

Fujimura, Toichiro; Nishida, Takahiko; Asai, Kiyoshi

1977-05-01

A manual on the revised JAERI scientific subroutine library is presented. The library is a collection of subroutines developed or modified in JAERI which complements the library installed for FACOM 230-75 computer. It is subject to further extension in the future, since the present one is still insufficient for scientific calculations. (auth.)

Open Science: Dimensions to a new scientific practice

Directory of Open Access Journals (Sweden)

Adriana Carla Silva de Oliveira

2016-08-01

Full Text Available Introduction:The practices of e-science and the use and reuse of scientific data have constituted a new scientific work that leads to the reflection on new regulatory, legal, institutional and technological frameworks for open science. Objective: This study shows the following research question: which dimensions provide sustainability for the formulation of a policy geared to open science and its practices in the Brazilian context? The aim of this study is to discuss the dimensions that support transversely the formulation of a policy for open science and its scientific practices. Methodology:Theoretically, the study is guided by the fourth scientific paradigm grounded in the e-Science. The methodology is supported by Bufrem’s studies (2013, which propose an alternative and multidimensional model for analysis and discussion of scientific research. Technically, the literature review and documentary survey were the methods used on the Data Lifecycle scientific model, laws and international agreements.For this study purpose, five dimensions were proposed, namely: epistemological, political, ethical-legal-cultural, morphological, and technological. Results: This studyunderstands that these dimensions substantiate an information policy or the development of minimum guidelines for the open science agenda in Brazil. Conclusions: The dimensions put away the reductionist perspective on survey data and they conducted the study for the multi-dimensional and multi-relational vision of open science.

SCHOOL LINGUISTIC CREATIVITY BASED ON SCIENTIFIC GEOGRAPHICAL TEXTS

Directory of Open Access Journals (Sweden)

VIORICA BLÎNDĂ

2012-01-01

Full Text Available The analysis and observation of the natural environment and of the social and economic one, observing phenomena, objects, beings, and geographical events are at the basis of producing geographical scientific texts. The symbols of iconotexts and cartotexts are another source of inspiration for linguistic interpretation. The linguistic creations that we selected for our study are the scientific analysis, the commentary, the characterization, the parallel, the synthesis, epitomizing and abstracting, the scientific communication, the essay, and the scientific description. The representations on maps, photos, graphics and profiles are translated into verbal or written expression in order to render geographical scientific information from diagrams and images through diverse discursive procedures. Through school linguistic creations, teachers develop their students’ observation spirit, in a written and oral form, their geographical thinking through metaphors, they develop and stimulate their students’ imagination and fantasy, their cognitive, reflexive and affective sensitivity, their abilities to express themselves, to present and argument in a scientific way according to different criteria (sufficiency, demonstrative reasoning, lineal reasoning, pros and cons, giving examples, inferential deduction through using truth tables, etc.. Trough description, students give names and define geographical objects and beings (plants, animals, and people according to their form and aspect, they explain toponyms and appellatives, they classify and make hierarchies, they define their identity through processes of differentiation, emblematizing, personification, location in time and space.

Restrictions of comparative analysis of investing in scientific research and scientific outcomes of the countries in nanotechnology

OpenAIRE

Milanović, Vesna; Bučalina-Matić, Andrea; Golubović, Marina

2016-01-01

The aim of this paper is to provide an insight into restrictions of comparative analysis of investing in scientific research and scientific outcomes of the countries in nanotechnology, having in mind that it is a developing technology which is expected to give significant contribution to science, economy and society in the future. Using the methods of content analysis, comparative methods and relevant literature, certain restrictions of this comparative analysis have been established. They ar...

Complexity-Based Modeling of Scientific Capital: An Outline of Mathematical Theory

Directory of Open Access Journals (Sweden)

Yurij L. Katchanov

2014-01-01

measuring and assessing the accumulated recognition and the specific scientific power. The concept of scientific capital developed by Bourdieu is used in international social science research to explain a set of scholarly properties and practices. Mathematical modeling is applied as a lens through which the scientific capital is addressed. The principal contribution of this paper is an axiomatic characterization of scientific capital in terms of natural axioms. The application of the axiomatic method to scientific capital reveals novel insights into problem still not covered by mathematical modeling. Proposed model embraces the interrelations between separate sociological variables, providing a unified sociological view of science. Suggested microvariational principle is based upon postulate, which affirms that (under suitable conditions the observed state of the agent in scientific field maximizes scientific capital. Its value can be roughly imagined as a volume of social differences. According to the considered macrovariational principle, the actual state of scientific field makes so-called energy functional (which is associated with the distribution of scientific capital minimal.

The Nature of Scientific Revolutions from the Vantage Point of Chaos Theory: Toward a Formal Model of Scientific Change

Science.gov (United States)

Perla, Rocco J.; Carifio, James

2005-01-01

In sharp contrast to the early positivist view of the nature of science and scientific knowledge, Kuhn argues that the scientific enterprise involves states of continuous, gradual development punctuated by comparatively rare instances of turmoil and change, which ultimately brings about a new stability and a qualitatively changed knowledge base.…

Socio-scientific controversies and beginning teachers’ pedagogical practice

Directory of Open Access Journals (Sweden)

Pedro Reis

2005-08-01

Full Text Available The current investigation aimed to study the impact of recent socio-scientific controversies, made public through the media, on the concepts and practices of a group of Natural Science teachers at the start of their careers. This study is particularly relevant at a time that is heavily marked by much debate regarding the social and environmental impact of several scientific and technological innovations and by the implementation of new science curricula, that stress the importance of discussing socio-scientific controversies in the context of students’ scientific alphabetisation (namely in their understanding of the nature of science and its relation to society and culture (McComas, 2000. This investigation followed an interpretative approach of a qualitative nature. Through the construction of case studies, it sought to analyse the possible impact of socio-scientific controversies on the teachers’ concepts (about the nature, teaching and learning of science and pedagogic practice. For data collection semi-structured interviews were conducted and classes observed.The controversial issues raised by certain recent technological innovations – namely the environmental, social and cultural impact they may have – did have an impact on the teachers’ concepts about the nature, teaching and learning of science. Besides reinforcing the duality of feelings as regards science and technology, as a source of both progress and concern, they triggered in these teachers the idea of the need for a widespread scientific alphabetisation that empowers the population for understanding and deciding and acting upon these issues. However, the concept of scientific alphabetisation and the best way to achieve it vary among the teachers participating in this study.

Electrical properties of MIS devices on CdZnTe/HgCdTe

Science.gov (United States)

Lee, Tae-Seok; Jeoung, Y. T.; Kim, Hyun Kyu; Kim, Jae Mook; Song, Jinhan; Ann, S. Y.; Lee, Ji Y.; Kim, Young Hun; Kim, Sun-Ung; Park, Mann-Jang; Lee, S. D.; Suh, Sang-Hee

1998-10-01

In this paper, we report the capacitance-voltage (C-V) properties of metal-insulator-semiconductor (MIS) devices on CdTe/HgCdTe by the metalorganic chemical vapor deposition (MOCVD) and CdZnTe/HgCdTe by thermal evaporation. In MOCVD, CdTe layers are directly grown on HgCdTe using the metal organic sources of DMCd and DiPTe. HgCdTe layers are converted to n-type and the carrier concentration, ND is low 1015 cm-3 after Hg-vacancy annealing at 260 degrees Celsius. In thermal evaporation, CdZnTe passivation layers were deposited on HgCdTe surfaces after the surfaces were etched with 0.5 - 2.0% bromine in methanol solution. To investigate the electrical properties of the MIS devices, the C-V measurement is conducted at 80 K and 1 MHz. C-V curve of MIS devices on CdTe/HgCdTe by MOCVD has shown nearly flat band condition and large hysteresis, which is inferred to result from many defects in CdTe layer induced during Hg-vacancy annealing process. A negative flat band voltage (VFB approximately equals -2 V) and a small hysteresis have been observed for MIS devices on CdZnTe/HgCdTe by thermal evaporation. It is inferred that the negative flat band voltage results from residual Te4+ on the surface after etching with bromine in methanol solution.

Adding intelligence to scientific data management

Science.gov (United States)

Campbell, William J.; Short, Nicholas M., Jr.; Treinish, Lloyd A.

1989-01-01

NASA plans to solve some of the problems of handling large-scale scientific data bases by turning to artificial intelligence (AI) are discussed. The growth of the information glut and the ways that AI can help alleviate the resulting problems are reviewed. The employment of the Intelligent User Interface prototype, where the user will generate his own natural language query with the assistance of the system, is examined. Spatial data management, scientific data visualization, and data fusion are discussed.

The Scientific Method in a Cup

Science.gov (United States)

Carroll, Bradley W.; More, M. B.

2006-12-01

This paper describes an inexpensive hands-on activity that invites students to investigate an intriguing mystery and so discover for themselves the essence of the scientific method. When a spoon is tapped against the bottom of a mug of freshly made hot chocolate, a tone of constantly rising pitch is heard. Students’ reactions to this “hot chocolate effect” illustrate how the scientific method may be constructed from the common sense and curiosity present in us all.

Teaching Scientific Ethics Using the Example of Hendrik Schon

Science.gov (United States)

Feldman, Bernard J.

2012-01-01

It has been almost 10 years since one of the greatest frauds in the history of physics was uncovered, namely, the case of Hendrik Schon. This case provides a wonderful opportunity to discuss scientific integrity and scientific misconduct with both undergraduate and graduate science students. This article explains the scientific data at the heart…

Theoretical bases analysis of scientific prediction on marketing principles

OpenAIRE

A.S. Rosohata

2012-01-01

The article presents an overview categorical apparatus of scientific predictions and theoretical foundations results of scientific forecasting. They are integral part of effective management of economic activities. The approaches to the prediction of scientists in different fields of Social science and the categories modification of scientific prediction, based on principles of marketing are proposed.

Open Access to Scientific Data: Promoting Science and Innovation

Directory of Open Access Journals (Sweden)

Guan-Hua Xu

2007-06-01

Full Text Available As an important part of the science and technology infrastructure platform of China, the Ministry of Science and Technology launched the Scientific Data Sharing Program in 2002. Twenty-four government agencies now participate in the Program. After five years of hard work, great progress has been achieved in the policy and legal framework, data standards, pilot projects, and international cooperation. By the end of 2005, one-third of the existing public-interest and basic scientific databases in China had been integrated and upgraded. By 2020, China is expected to build a more user-friendly scientific data management and sharing system, with 80 percent of scientific data available to the general public. In order to realize this objective, the emphases of the project are to perfect the policy and legislation system, improve the quality of data resources, expand and establish national scientific data centers, and strengthen international cooperation. It is believed that with the opening up of access to scientific data in China, the Program will play a bigger role in promoting science and national innovation.

Undergraduate medical academic performance is improved by scientific training.

Science.gov (United States)

Zhang, Lili; Zhang, Wei; Wu, Chong; Liu, Zhongming; Cai, Yunfei; Cao, Xingguo; He, Yushan; Liu, Guoxiang; Miao, Hongming

2017-09-01

The effect of scientific training on course learning in undergraduates is still controversial. In this study, we investigated the academic performance of undergraduate students with and without scientific training. The results show that scientific training improves students' test scores in general medical courses, such as biochemistry and molecular biology, cell biology, physiology, and even English. We classified scientific training into four levels. We found that literature reading could significantly improve students' test scores in general courses. Students who received scientific training carried out experiments more effectively and published articles performed better than their untrained counterparts in biochemistry and molecular biology examinations. The questionnaire survey demonstrated that the trained students were more confident of their course learning, and displayed more interest, motivation and capability in course learning. In summary, undergraduate academic performance is improved by scientific training. Our findings shed light on the novel strategies in the management of undergraduate education in the medical school. © 2017 by The International Union of Biochemistry and Molecular Biology, 45(5):379-384, 2017. © 2017 The International Union of Biochemistry and Molecular Biology.

[Scientific journals of medical students in Latin-America].

Science.gov (United States)

Cabrera-Samith, Ignacio; Oróstegui-Pinilla, Diana; Angulo-Bazán, Yolanda; Mayta-Tristán, Percy; Rodríguez-Morales, Alfonso J

2010-11-01

This article deals with the history and evolution of student's scientific journals in Latin-America, their beginnings, how many still exist and which is their future projection. Relevant events show the growth of student's scientific journals in Latin-America and how are they working together to improve their quality. This article is addressed not only for Latin American readers but also to worldwide readers. Latin American medical students are consistently working together to publish scientific research, whose quality is constantly improving.

2006 XSD Scientific Software Workshop report.

Energy Technology Data Exchange (ETDEWEB)

Evans, K., Jr.; De Carlo, F.; Jemian, P.; Lang, J.; Lienert, U.; Maclean, J.; Newville, M.; Tieman, B.; Toby, B.; van Veenendaal, B.; Univ. of Chicago

2006-01-22

In May of 2006, a committee was formed to assess the fundamental needs and opportunities in scientific software for x-ray data reduction, analysis, modeling, and simulation. This committee held a series of discussions throughout the summer, conducted a poll of the members of the x-ray community, and held a workshop. This report details the findings and recommendations of the committee. Each experiment performed at the APS requires three crucial ingredients: the powerful x-ray source, an optimized instrument to perform measurements, and computer software to acquire, visualize, and analyze the experimental observations. While the APS has invested significant resources in the accelerator, investment in other areas such as scientific software for data analysis and visualization has lagged behind. This has led to the adoption of a wide variety of software with variable levels of usability. In order to maximize the scientific output of the APS, it is essential to support the broad development of real-time analysis and data visualization software. As scientists attack problems of increasing sophistication and deal with larger and more complex data sets, software is playing an ever more important role. Furthermore, our need for excellent and flexible scientific software can only be expected to increase, as the upgrade of the APS facility and the implementation of advanced detectors create a host of new measurement capabilities. New software analysis tools must be developed to take full advantage of these capabilities. It is critical that the APS take the lead in software development and the implementation of theory to software to ensure the continued success of this facility. The topics described in this report are relevant to the APS today and critical for the APS upgrade plan. Implementing these recommendations will have a positive impact on the scientific productivity of the APS today and will be even more critical in the future.

Report for the Office of Scientific and Technical Information: Population Modeling of the Emergence and Development of Scientific Fields

Energy Technology Data Exchange (ETDEWEB)

Bettencourt, L. M. A. (LANL); Castillo-Chavez, C. (Arizona State University); Kaiser, D. (MIT); Wojick, D. E. (IIA)

2006-10-04

The accelerated development of digital libraries and archives, in tandem with efficient search engines and the computational ability to retrieve and parse massive amounts of information, are making it possible to quantify the time evolution of scientific literatures. These data are but one piece of the tangible recorded evidence of the processes whereby scientists create and exchange information in their journeys towards the generation of knowledge. As such, these tools provide a proxy with which to study our ability to innovate. Innovation has often been linked with prosperity and growth and, consequently, trying to understand what drives scientific innovation is of extreme interest. Identifying sets of population characteristics, factors, and mechanisms that enable scientific communities to remain at the cutting edge, accelerate their growth, or increase their ability to re-organize around new themes or research topics is therefore of special significance. Yet generating a quantitative understanding of the factors that make scientific fields arise and/or become more or less productive is still in its infancy. This is precisely the type of knowledge most needed for promoting and sustaining innovation. Ideally, the efficient and strategic allocation of resources on the part of funding agencies and corporations would be driven primarily by knowledge of this type. Early steps have been taken toward such a quantitative understanding of scientific innovation. Some have focused on characterizing the broad properties of relevant time series, such as numbers of publications and authors in a given field. Others have focused on the structure and evolution of networks of coauthorship and citation. Together these types of studies provide much needed statistical analyses of the structure and evolution of scientific communities. Despite these efforts, however, crucial elements of prediction have remained elusive. Building on many of these earlier insights, we provide here a

Experiences of Scientific Thinking in Physics Classrooms

Directory of Open Access Journals (Sweden)

Alexandre Fagundes Faria

2018-04-01

Full Text Available There is a contemporary demand on STEM education to support learning experiences in which students use scientific thinking to solve tasks. Scientific thinking involves domain-specific knowledge and general domain strategies of thinking. The object of interest in this research was the set of students’ experiences of scientific thinking in which they articulate domain-general strategies and domain-specific knowledge to solve physics tasks. Our goal was to characterize the experiences of scientific thinking of two groups of four students engaged in tasks about Newtonian Mechanics. The volunteers were 19 students, 15-17 years old, enrolled in electronics or computer science courses (11th grade of a Brazilian vocational high school at Belo Horizonte/Minas Gerais. All class activities proposed to the students have been regularly used since 2010, therefore, we made no special intervention to conduct the study. Data collection occurred during the classes and involved audio and video recordings of students working in group; field notes; and photographs of students’ notebooks and of the posters they made to conduct oral presentations. The choice of the groups was based on how assiduous the members were. We have transcribed episodes in which we identified experiences of scientific thinking. These transcriptions, the field notes and the photographs were analyzed together, in interaction with each other. Data analysis is based upon John Dewey’s Theory of Experience. Our results show that the experiences of scientific thinking of the two groups were educative experiences, although qualitatively different. This difference was due to the way students interacted with the conditions given to solve the tasks. Additional information is given about the school circumstances in which the study was conducted to allow a better evaluation of results quality.

Manual on JSSL (JAERI scientific subroutine library)

International Nuclear Information System (INIS)

Fujimura, Toichiro; Nishida, Takahiko; Asai, Kiyoshi

1979-11-01

A manual on the revised version of JAERI scientific subroutine library is presented. The library is a collection of subroutines developed or modified in JAERI. They are classified into fifteen fields. It is subject to further extension in the future, since there are some fields still insufficient for scientific calculations in the present library. (author)

Ecological potentialities for the future scientific research

International Nuclear Information System (INIS)

Fidirko, V.A.

1996-01-01

Efficient scientific development may promote the solution of all the environmental problems. The way the question is put is new, for science is finally considered to be the source of all environmental disasters and to be blamed for that. Search for the means to solve scientifically induced crisis situation seems to be very interesting. (author)

Rural Entrepreneurship in Nigeria: Lessons From Scientific ...

African Journals Online (AJOL)

This article focussed on the lessons that can be garnered from the tenets of Scientific Management. We undertook an X-ray of the tenets of Scientific Management and how these tenets can be adopted to ensure the success of emerging entrepreneurs in the rural areas. Many rural entrepreneurs fail within a short period of ...

Scientific visualization uncertainty, multifield, biomedical, and scalable visualization

CERN Document Server

Chen, Min; Johnson, Christopher; Kaufman, Arie; Hagen, Hans

2014-01-01

Based on the seminar that took place in Dagstuhl, Germany in June 2011, this contributed volume studies the four important topics within the scientific visualization field: uncertainty visualization, multifield visualization, biomedical visualization and scalable visualization. • Uncertainty visualization deals with uncertain data from simulations or sampled data, uncertainty due to the mathematical processes operating on the data, and uncertainty in the visual representation, • Multifield visualization addresses the need to depict multiple data at individual locations and the combination of multiple datasets, • Biomedical is a vast field with select subtopics addressed from scanning methodologies to structural applications to biological applications, • Scalability in scientific visualization is critical as data grows and computational devices range from hand-held mobile devices to exascale computational platforms. Scientific Visualization will be useful to practitioners of scientific visualization, ...

Scientific Habits of Mind in Virtual Worlds

Science.gov (United States)

Steinkuehler, Constance; Duncan, Sean

2008-12-01

In today's increasingly "flat" world of globalization (Friedman 2005), the need for a scientifically literate citizenry has grown more urgent. Yet, by some measures, we have done a poor job at fostering scientific habits of mind in schools. Recent research on informal games-based learning indicates that such technologies and the communities they evoke may be one viable alternative—not as a substitute for teachers and classrooms, but as an alternative to textbooks and science labs. This paper presents empirical evidence about the potential of games for fostering scientific habits of mind. In particular, we examine the scientific habits of mind and dispositions that characterize online discussion forums of the massively multiplayer online game World of Warcraft. Eighty-six percent of the forum discussions were posts engaged in "social knowledge construction" rather than social banter. Over half of the posts evidenced systems based reasoning, one in ten evidenced model-based reasoning, and 65% displayed an evaluative epistemology in which knowledge is treated as an open-ended process of evaluation and argument.

Introductory Biology Textbooks Under-Represent Scientific Process

Directory of Open Access Journals (Sweden)

Dara B. Duncan

2011-08-01

Full Text Available Attrition of undergraduates from Biology majors is a long-standing problem. Introductory courses that fail to engage students or spark their curiosity by emphasizing the open-ended and creative nature of biological investigation and discovery could contribute to student detachment from the field. Our hypothesis was that introductory biology books devote relatively few figures to illustration of the design and interpretation of experiments or field studies, thereby de-emphasizing the scientific process.To investigate this possibility, we examined figures in six Introductory Biology textbooks published in 2008. On average, multistep scientific investigations were presented in fewer than 5% of the hundreds of figures in each book. Devoting such a small percentage of figures to the processes by which discoveries are made discourages an emphasis on scientific thinking. We suggest that by increasing significantly the illustration of scientific investigations, textbooks could support undergraduates’ early interest in biology, stimulate the development of design and analytical skills, and inspire some students to participate in investigations of their own.

[Scientific publications: a resource for the physician's intellectual development].

Science.gov (United States)

Zárate, Arturo

2013-01-01

The physician's professional life involves reading and analysis of scientific journals, regardless of the specialization field. The hospital and academic areas lead to the scientific-literary activity development. The aim of this editorial is to make some reflections about the way a physician reaches intellectual development, through the creation of a culture of writing and reading scientific publications.

Structural evolution due to Zn and Te adsorption on As-exposed Si(211): density functional calculation

International Nuclear Information System (INIS)

Gupta, Bikash C; Konar, Shyamal; Grein, C H; Sivananthan, S

2009-01-01

Systematic theoretical investigations are carried out under the density functional formalism in an effort to understand the initial structural evolution due to the adsorption of ZnTe on As-exposed Si(211). Our calculations indicate that after the adsorption of Zn and Te on the As-exposed Si(211), the stable atomic structure qualitatively follows the ideal atomic structure of Si(211) with alteration of various bond lengths. Since the basic symmetry of the Si(211) is preserved after the adsorption of ZnTe, the deposition of ZnTe on the As terminated Si(211) prior to the deposition of CdTe and HgCdTe is useful for obtaining an ultimate quality layer of HgCdTe on Si(211). Some of our results are compared with the available experimental results, and they are found to agree with each other qualitatively.

Annual report 1985

International Nuclear Information System (INIS)

1985-01-01

Aspects regarding ceramics, electronic materials, metals, the specialist task group, services to industry and other organizations and research support activities are discussed in the report. The highlights of the period are given, namely: the effect of high pressure on twophase systems, spinel structures, elastic moduli of stabilized zirconia crystals, alumina ceramics, a fast sodium-ion conducting solid electrolyte (Nasicon), liquid phase epitaxial growth of (HgCd)Te, compositional uniformity of bulk-grown (HgCd)Te, semi-quantitative mass spectrography of Cd and Te, depth profiling of metal semiconductor interdiffusion, low resistance ohmic contacts on GaAs, studies of Fe-Mn-Al alloys, surface mechanical properties of materials, electron diffraction, ceramic mould laboratory for investment casting of metals, grain boundary, sliding in the deformation of polycrystalline copper and a theory of work-hardening in face-centered cubic metals

Medical elementology as a new scientific discipline

International Nuclear Information System (INIS)

Zaichick, V.

2006-01-01

All legitimate scientific disciplines are characterized by: (1) the clear definition of subjects of the study and its corresponding clear-cut name, (2) some accepted postulates, (3) set of research methods, (4) methods of quality control and processing of the obtained information, and (5) specific terminology and definitions. The inaccuracies and uncertainties in medical elementology as a new scientific discipline are discussed and some corresponding statements are made. Another and no less important problem of medical elementology is the critical unsatisfactory reproducibility of data. The complex arrangements required for the harmonization of data acquired for studies in medical elementology are offered. Main strategic aims and tactical tasks of the new scientific discipline are outlined. (author)

[The scientific entertainer in primary health care].

Science.gov (United States)

Ortega-Calvo, Manuel; Santos, José Manuel; Lapetra, José

2012-09-01

The scientific method is capable of being applied in primary care. In this article we defend the role of the "scientific entertainer "as strategic and necessary in achieving this goal. The task has to include playful and light-hearted content. We explore some words in English that may help us to understand the concept of "scientific entertainer" from a semantic point of view (showman, master of ceremonies, entrepreneur, go-between) also in Spanish language (counsellor, mediator, methodologist) and finally in Latin and Greek (tripalium, negotium, chronos, kairos). We define the clinical, manager or research health-worker who is skilled in primary care as a "primarylogist". Copyright © 2011 Elsevier España, S.L. All rights reserved.

Dorky Poll Scientific Fears

CERN Multimedia

2008-01-01

The questions posed in yesterday's posts about hopes for 2008 were half of what we were asked by the Powers That Be. The other half: What scientific development do you fear you'll be blogging or reading about in 2008?

The Scientific & Democratic Revolution in Education

Directory of Open Access Journals (Sweden)

Ramón Flecha

2011-10-01

Full Text Available The main issue dealt with in this theoretical paper is the explanation of the starting scientific and democratic revolution both in the educative field and in the educative research. In addition, evidence-based arguments are included to provide validity of some affirmations. The first section argues that the social sciences are the daughters and an essential part of democracy. A few historical arguments about the way in which the dominant classes have slowed down the scientific progress and the development of people that make it possible. In the second section, it is analyzed the opposition of feudal universities to this unstoppable beginning of what could be called the scientific and democratic revolution. At the same time, we deal with its ambivalent character requiring to be supported and to be criticized so that it can be improved. In the third section, we expound the way in which this progress has provide some conditions that makes it possible to overcome the strong gender-based violence happening in our institutions of higher education and makes it also possible that women who were persecuted are now transforming our universities. Influences and criticism to our university feudalism, made by social movements such as the named 'Spanish Revolution', appear in the fourth section. In the fifth and last section, we offer a proposal to promote the scientific, democratic, and revolutionary approach of the university.

Scientific Integrity and Professional Ethics at AGU - The Establishment and Evolution of an Ethics Program at a Large Scientific Society

Science.gov (United States)

McPhaden, Michael; Leinen, Margaret; McEntee, Christine; Townsend, Randy; Williams, Billy

2016-04-01

The American Geophysical Union, a scientific society of 62,000 members worldwide, has established a set of scientific integrity and professional ethics guidelines for the actions of its members, for the governance of the union in its internal activities, and for the operations and participation in its publications and scientific meetings. This presentation will provide an overview of the Ethics program at AGU, highlighting the reasons for its establishment, the process of dealing ethical breaches, the number and types of cases considered, how AGU helps educate its members on Ethics issues, and the rapidly evolving efforts at AGU to address issues related to the emerging field of GeoEthics. The presentation will also cover the most recent AGU Ethics program focus on the role for AGU and other scientific societies in addressing sexual harassment, and AGU's work to provide additional program strength in this area.

Assessing the scientific relevance of a single publication over time

Directory of Open Access Journals (Sweden)

Philipp A. Bloching

2013-09-01

Full Text Available Quantitatively assessing the scientific relevance of a research paper is challenging for two reasons. Firstly, scientific relevance may change over time, and secondly, it is unclear how to evaluate a recently published paper. The temporally averaged paper-specific impact factor is defined as the yearly average of citations to the paper until now including bonus citations equal to the journal impact factor in the publication year. This new measure subsequently allows relevance rankings and annual updates of all (i.e. both recent and older scientific papers of a department, or even a whole scientific field, on a more objective basis. It can also be used to assess both the average and overall time-dependent scientific relevance of researchers in a specific department or scientific field.

Scientific Library Offers New Training Options | Poster

Science.gov (United States)

The Scientific Library is expanding its current training opportunities by offering webinars, allowing employees to take advantage of trainings from the comfort of their own offices. Due to the nature of their work, some employees find it inconvenient to attend in-person training classes; others simply prefer to use their own computers. The Scientific Library has been