Fellow travellers: Working memory and mental time travel in rodents.

Science.gov (United States)

Dere, Ekrem; Dere, Dorothea; de Souza Silva, Maria Angelica; Huston, Joseph P; Zlomuzica, Armin

2017-03-19

The impairment of mental time travel is a severe cognitive symptom in patients with brain lesions and a number of neuropsychiatric disorders. Whether animals are also able to mentally travel in time both forward and backward is still a matter of debate. In this regard, we have proposed a continuum of mental time travel abilities across different animal species, with humans being the species with the ability to perform most sophisticated forms of mental time travel. In this review and perspective article, we delineate a novel approach to understand the evolution, characteristics and function of human and animal mental time travel. Furthermore, we propose a novel approach to measure mental time travel in rodents in a comprehensive manner using a test battery composed of well-validated and easy applicable tests. Copyright © 2017. Published by Elsevier B.V.

32 CFR 636.24 - Driving on right side of roadway; use of roadway.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Driving on right side of roadway; use of roadway... (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS MOTOR VEHICLE TRAFFIC SUPERVISION (SPECIFIC INSTALLATIONS) Fort Stewart, Georgia § 636.24 Driving on right side of roadway; use of roadway. (a) All drivers...

Risk analysis for roadways subjected to multiple landslide-related hazards

Science.gov (United States)

Corominas, Jordi; Mavrouli, Olga

2014-05-01

Roadways through mountainous terrain often involve cuts and landslide areas whose stability is precarious and require protection and stabilization works. To optimize the allocation of resources, government and technical offices are increasingly interested in both the risk analysis and assessment. Risk analysis has to consider the hazard occurrence and the consequences. The consequences can be both direct and indirect. The former include the costs regarding the repair of the roadway, the damage of vehicles and the potential fatalities, while the latter refer to the costs related to the diversion of vehicles, the excess of distance travelled, the time differences, and tolls. The type of slope instabilities that may affect a roadway may vary and its effects as well. Most current approaches either consider a single hazardous phenomenon each time, or if applied at small (for example national) scale, they do not take into account local conditions at each section of the roadway. The objective of this work is the development of a simple and comprehensive methodology for the assessment of the risk due to multiple hazards along roadways, integrating different landslide types that include rockfalls, debris flows and considering as well the potential failure of retaining walls. To quantify risk, all hazards are expressed with a common term: their probability of occurrence. The methodology takes into consideration the specific local conditions along the roadway. For rockfalls and debris flow a variety of methods for assessing the probability of occurrence exists. To assess the annual probability of failure of retaining walls we use an indicator-based model that provides a hazard index. The model parameters consist in the design safety factor, and further anchorage design and construction parameters. The probability of failure is evaluated in function of the hazard index and next corrected (in terms of order of magnitude) according to in situ observations for increase of two

Value of travel time.

Science.gov (United States)

2016-08-01

Knowingly or not, people generally place economic value on their time. Wage workers are paid a rate per hour, and service providers may charge per hour of their time. In the transportation realm, travelers place a value on their travel time and have ...

On the relationship between travel time and travel distance of commuters

NARCIS (Netherlands)

Rietveld, P.; Zwart, A.P.; Wee, van G.P.; Hoorn, van der T.

1999-01-01

This paper gives a detailed empirical analysis of the relationships between different indicators of costs of commuting trips by car: difference as the crow flies, shortest travel time according to route planner, corresponding travel distance, and reported travel time. Reported travel times are

Calculation of groundwater travel time

International Nuclear Information System (INIS)

Arnett, R.C.; Sagar, B.; Baca, R.G.

1984-12-01

Pre-waste-emplacement groundwater travel time is one indicator of the isolation capability of the geologic system surrounding a repository. Two distinct modeling approaches exist for prediction of groundwater flow paths and travel times from the repository location to the designated accessible environment boundary. These two approaches are: (1) the deterministic approach which calculates a single value prediction of groundwater travel time based on average values for input parameters and (2) the stochastic approach which yields a distribution of possible groundwater travel times as a function of the nature and magnitude of uncertainties in the model inputs. The purposes of this report are to (1) document the theoretical (i.e., mathematical) basis used to calculate groundwater pathlines and travel times in a basalt system, (2) outline limitations and ranges of applicability of the deterministic modeling approach, and (3) explain the motivation for the use of the stochastic modeling approach currently being used to predict groundwater pathlines and travel times for the Hanford Site. Example calculations of groundwater travel times are presented to highlight and compare the differences between the deterministic and stochastic modeling approaches. 28 refs

Travel time data collection handbook

Science.gov (United States)

1998-03-01

This Travel Time Data Collection Handbook provides guidance to transportation : professionals and practitioners for the collection, reduction, and presentation : of travel time data. The handbook should be a useful reference for designing : travel ti...

Accurate estimation of indoor travel times

DEFF Research Database (Denmark)

Prentow, Thor Siiger; Blunck, Henrik; Stisen, Allan

2014-01-01

The ability to accurately estimate indoor travel times is crucial for enabling improvements within application areas such as indoor navigation, logistics for mobile workers, and facility management. In this paper, we study the challenges inherent in indoor travel time estimation, and we propose...... the InTraTime method for accurately estimating indoor travel times via mining of historical and real-time indoor position traces. The method learns during operation both travel routes, travel times and their respective likelihood---both for routes traveled as well as for sub-routes thereof. InTraTime...... allows to specify temporal and other query parameters, such as time-of-day, day-of-week or the identity of the traveling individual. As input the method is designed to take generic position traces and is thus interoperable with a variety of indoor positioning systems. The method's advantages include...

"Bicycles May Use Full Lane" Signage Communicates U.S. Roadway Rules and Increases Perception of Safety.

Science.gov (United States)

Hess, George; Peterson, M Nils

2015-01-01

Many global challenges, including obesity, health care costs, and climate change, could be addressed in part by increasing the use of bicycles for transportation. Concern about the safety of bicycling on roadways is frequently cited as a deterrent to increasing bicycle use in the USA. The use of effective signage along roadways might help alleviate these concerns by increasing knowledge about the rights and duties of bicyclists and motorists, ideally reducing crashes. We administered a web-based survey, using Twitter for recruitment, to examine how well three US traffic control devices communicated the message that bicyclists are permitted in the center of the travel lane and do not have to "get out of the way" to allow motorists to pass without changing lanes: "Bicycles May Use Full Lane" and "Share the Road" signage, and Shared Lane Markings on the pavement. Each was compared to an unsigned roadway. We also asked respondents whether it was safe for a bicyclist to occupy the center of the travel lane. "Bicycles May Use Full Lane" signage was the most consistently comprehended device for communicating the message that bicyclists may occupy the travel lane and also increased perceptions of safety. "Share the Road" signage did not increase comprehension or perceptions of safety. Shared Lane Markings fell somewhere between. "Bicycles May Use Full Lane" signage showed notable increases in comprehension among novice bicyclists and private motor vehicle commuters, critical target audiences for efforts to promote bicycling in the USA. Although limited in scope, our survey results are indicative and suggest that Departments of Transportation consider replacing "Share the Road" with "Bicycles May Use Full Lane" signage, possibly combined with Shared Lane Markings, if the intent is to increase awareness of roadway rights and responsibilities. Further evaluation through virtual reality simulations and on-road experiments is merited.

"Bicycles May Use Full Lane" Signage Communicates U.S. Roadway Rules and Increases Perception of Safety.

Directory of Open Access Journals (Sweden)

George Hess

Full Text Available Many global challenges, including obesity, health care costs, and climate change, could be addressed in part by increasing the use of bicycles for transportation. Concern about the safety of bicycling on roadways is frequently cited as a deterrent to increasing bicycle use in the USA. The use of effective signage along roadways might help alleviate these concerns by increasing knowledge about the rights and duties of bicyclists and motorists, ideally reducing crashes. We administered a web-based survey, using Twitter for recruitment, to examine how well three US traffic control devices communicated the message that bicyclists are permitted in the center of the travel lane and do not have to "get out of the way" to allow motorists to pass without changing lanes: "Bicycles May Use Full Lane" and "Share the Road" signage, and Shared Lane Markings on the pavement. Each was compared to an unsigned roadway. We also asked respondents whether it was safe for a bicyclist to occupy the center of the travel lane. "Bicycles May Use Full Lane" signage was the most consistently comprehended device for communicating the message that bicyclists may occupy the travel lane and also increased perceptions of safety. "Share the Road" signage did not increase comprehension or perceptions of safety. Shared Lane Markings fell somewhere between. "Bicycles May Use Full Lane" signage showed notable increases in comprehension among novice bicyclists and private motor vehicle commuters, critical target audiences for efforts to promote bicycling in the USA. Although limited in scope, our survey results are indicative and suggest that Departments of Transportation consider replacing "Share the Road" with "Bicycles May Use Full Lane" signage, possibly combined with Shared Lane Markings, if the intent is to increase awareness of roadway rights and responsibilities. Further evaluation through virtual reality simulations and on-road experiments is merited.

Additive measures of travel time variability

DEFF Research Database (Denmark)

Engelson, Leonid; Fosgerau, Mogens

2011-01-01

This paper derives a measure of travel time variability for travellers equipped with scheduling preferences defined in terms of time-varying utility rates, and who choose departure time optimally. The corresponding value of travel time variability is a constant that depends only on preference...... parameters. The measure is unique in being additive with respect to independent parts of a trip. It has the variance of travel time as a special case. Extension is provided to the case of travellers who use a scheduled service with fixed headway....

Contact Frequency, Travel Time, and Travel Costs for Patients with Rheumatoid Arthritis

OpenAIRE

Sørensen, Jan; Linde, Louise; Hetland, Merete Lund

2014-01-01

Objectives. To investigate travel time, and travel cost related to contacts with health care providers for patients with rheumatoid arthritis (RA) during a three-month period. Methods. Patient-reported travel time and travel cost were obtained from 2847 patients with RA. Eleven outpatient clinics across Denmark recruited patients to the study. Data collected included frequency, travel time and travel costs for contacts at rheumatology outpatient clinics, other outpatient clinics, general prac...

Travel Time to Hospital for Childbirth: Comparing Calculated Versus Reported Travel Times in France.

Science.gov (United States)

Pilkington, Hugo; Prunet, Caroline; Blondel, Béatrice; Charreire, Hélène; Combier, Evelyne; Le Vaillant, Marc; Amat-Roze, Jeanne-Marie; Zeitlin, Jennifer

2018-01-01

Objectives Timely access to health care is critical in obstetrics. Yet obtaining reliable estimates of travel times to hospital for childbirth poses methodological challenges. We compared two measures of travel time, self-reported and calculated, to assess concordance and to identify determinants of long travel time to hospital for childbirth. Methods Data came from the 2010 French National Perinatal Survey, a national representative sample of births (N = 14 681). We compared both travel time measures by maternal, maternity unit and geographic characteristics in rural, peri-urban and urban areas. Logistic regression models were used to study factors associated with reported and calculated times ≥30 min. Cohen's kappa coefficients were also calculated to estimate the agreement between reported and calculated times according to women's characteristics. Results In urban areas, the proportion of women with travel times ≥30 min was higher when reported rather than calculated times were used (11.0 vs. 3.6%). Longer reported times were associated with non-French nationality [adjusted odds ratio (aOR) 1.3 (95% CI 1.0-1.7)] and inadequate prenatal care [aOR 1.5 (95% CI 1.2-2.0)], but not for calculated times. Concordance between the two measures was higher in peri-urban and rural areas (52.4 vs. 52.3% for rural areas). Delivery in a specialised level 2 or 3 maternity unit was a principal determinant of long reported and measured times in peri-urban and rural areas. Conclusions for Practice The level of agreement between reported and calculated times varies according to geographic context. Poor measurement of travel time in urban areas may mask problems in accessibility.

On the relationship between travel time and travel distance in the Netherlands

NARCIS (Netherlands)

Rietveld, P.; Zwart, B.; van Wee, B.; van der Hoorn, A.I.J.M.

1999-01-01

This paper gives a detailed empirical analysis of the relationships between different indicators of costs of commuting trips by car: difference as the crow flies, shortest travel time according to route planner, corresponding travel distance, and reported travel time. Reported travel times are

“Bicycles May Use Full Lane” Signage Communicates U.S. Roadway Rules and Increases Perception of Safety

Science.gov (United States)

2015-01-01

Many global challenges, including obesity, health care costs, and climate change, could be addressed in part by increasing the use of bicycles for transportation. Concern about the safety of bicycling on roadways is frequently cited as a deterrent to increasing bicycle use in the USA. The use of effective signage along roadways might help alleviate these concerns by increasing knowledge about the rights and duties of bicyclists and motorists, ideally reducing crashes. We administered a web-based survey, using Twitter for recruitment, to examine how well three US traffic control devices communicated the message that bicyclists are permitted in the center of the travel lane and do not have to “get out of the way” to allow motorists to pass without changing lanes: “Bicycles May Use Full Lane” and “Share the Road” signage, and Shared Lane Markings on the pavement. Each was compared to an unsigned roadway. We also asked respondents whether it was safe for a bicyclist to occupy the center of the travel lane. “Bicycles May Use Full Lane” signage was the most consistently comprehended device for communicating the message that bicyclists may occupy the travel lane and also increased perceptions of safety. “Share the Road” signage did not increase comprehension or perceptions of safety. Shared Lane Markings fell somewhere between. “Bicycles May Use Full Lane” signage showed notable increases in comprehension among novice bicyclists and private motor vehicle commuters, critical target audiences for efforts to promote bicycling in the USA. Although limited in scope, our survey results are indicative and suggest that Departments of Transportation consider replacing “Share the Road” with “Bicycles May Use Full Lane” signage, possibly combined with Shared Lane Markings, if the intent is to increase awareness of roadway rights and responsibilities. Further evaluation through virtual reality simulations and on-road experiments is merited. PMID

Network structure and travel time perception.

Science.gov (United States)

Parthasarathi, Pavithra; Levinson, David; Hochmair, Hartwig

2013-01-01

The purpose of this research is to test the systematic variation in the perception of travel time among travelers and relate the variation to the underlying street network structure. Travel survey data from the Twin Cities metropolitan area (which includes the cities of Minneapolis and St. Paul) is used for the analysis. Travelers are classified into two groups based on the ratio of perceived and estimated commute travel time. The measures of network structure are estimated using the street network along the identified commute route. T-test comparisons are conducted to identify statistically significant differences in estimated network measures between the two traveler groups. The combined effect of these estimated network measures on travel time is then analyzed using regression models. The results from the t-test and regression analyses confirm the influence of the underlying network structure on the perception of travel time.

Contact frequency, travel time, and travel costs for patients with rheumatoid arthritis

DEFF Research Database (Denmark)

Sørensen, Jan; Linde, Louise; Hetland, Merete Lund

2014-01-01

Objectives. To investigate travel time, and travel cost related to contacts with health care providers for patients with rheumatoid arthritis (RA) during a three-month period. Methods. Patient-reported travel time and travel cost were obtained from 2847 patients with RA. Eleven outpatient clinics...... across Denmark recruited patients to the study. Data collected included frequency, travel time and travel costs for contacts at rheumatology outpatient clinics, other outpatient clinics, general practitioners, privately practicing medical specialists, inpatient hospitals and accident and emergency...... and 13 € on travelling per contact, corresponding to a total of 4.6 hours and 56 € during the 3-month period. There was great variation in patient travel time and costs, but no statistically significant associations were found with clinical and sociodemographic characteristics. Conclusion. The results...

5 CFR 550.1404 - Creditable travel time.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Creditable travel time. 550.1404 Section... ADMINISTRATION (GENERAL) Compensatory Time Off for Travel § 550.1404 Creditable travel time. (a) General. Subject... off for time in a travel status if— (1) The employee is required to travel away from the official duty...

Traveller Information System for Heterogeneous Traffic Condition: A Case Study in Thiruvananthapuram City, India

Science.gov (United States)

Satyakumar, M.; Anil, R.; Sreeja, G. S.

2017-12-01

Traffic in Kerala has been growing at a rate of 10-11% every year, resulting severe congestion especially in urban areas. Because of the limitation of spaces it is not always possible to construct new roads. Road users rely on travel time information for journey planning and route choice decisions, while road system managers are increasingly viewing travel time as an important network performance indicator. More recently Advanced Traveler Information Systems (ATIS) are being developed to provide real-time information to roadway users. For ATIS various methodologies have been developed for dynamic travel time prediction. For this work the Kalman Filter Algorithm was selected for dynamic travel time prediction of different modes. The travel time data collected using handheld GPS device were used for prediction. Congestion Index were calculated and Range of CI values were determined according to the percentage speed drop. After prediction using Kalman Filter, the predicted values along with the GPS data was integrated to GIS and using Network Analysis of ArcGIS the offline route navigation guide was prepared. Using this database a program for route navigation based on travel time was developed. This system will help the travelers with pre-trip information.

Contact frequency, travel time, and travel costs for patients with rheumatoid arthritis.

Science.gov (United States)

Sørensen, Jan; Linde, Louise; Hetland, Merete Lund

2014-01-01

Objectives. To investigate travel time, and travel cost related to contacts with health care providers for patients with rheumatoid arthritis (RA) during a three-month period. Methods. Patient-reported travel time and travel cost were obtained from 2847 patients with RA. Eleven outpatient clinics across Denmark recruited patients to the study. Data collected included frequency, travel time and travel costs for contacts at rheumatology outpatient clinics, other outpatient clinics, general practitioners, privately practicing medical specialists, inpatient hospitals and accident and emergency departments. Results. Over a 3-month period, patients with RA had on average 4.4 (sd 5.7) contacts with health care providers, of which 2.8 (sd 4.0) contacts were with rheumatology outpatient clinics. Private car and public travel were the most frequent modes of travel. The average patient spent 63 minutes and 13 € on travelling per contact, corresponding to a total of 4.6 hours and 56 € during the 3-month period. There was great variation in patient travel time and costs, but no statistically significant associations were found with clinical and sociodemographic characteristics. Conclusion. The results show that patients with RA spend private time and costs on travelling when they seek treatment. These findings are particularly important when analyzing social costs associated with RA.

Analysis of bluetooth and wi-fi technology to measure wait times of personal vehicles at Arizona-Mexico ports of entry.

Science.gov (United States)

2015-11-01

Robust travel time data collection is possible using Bluetooth or Wi-Fi technology that : matches anonymous MAC addresses from discoverable electronic devices (e.g., smart phones) : to determine travel time along a roadway segment. Several hundred...

5 CFR 630.207 - Travel time.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Travel time. 630.207 Section 630.207... and General Provisions for Annual and Sick Leave § 630.207 Travel time. The travel time granted an employee under section 6303(d) of title 5, United States Code, is inclusive of the time necessarily...

Contact Frequency, Travel Time, and Travel Costs for Patients with Rheumatoid Arthritis

Directory of Open Access Journals (Sweden)

Jan Sørensen

2014-01-01

Full Text Available Objectives. To investigate travel time, and travel cost related to contacts with health care providers for patients with rheumatoid arthritis (RA during a three-month period. Methods. Patient-reported travel time and travel cost were obtained from 2847 patients with RA. Eleven outpatient clinics across Denmark recruited patients to the study. Data collected included frequency, travel time and travel costs for contacts at rheumatology outpatient clinics, other outpatient clinics, general practitioners, privately practicing medical specialists, inpatient hospitals and accident and emergency departments. Results. Over a 3-month period, patients with RA had on average 4.4 (sd 5.7 contacts with health care providers, of which 2.8 (sd 4.0 contacts were with rheumatology outpatient clinics. Private car and public travel were the most frequent modes of travel. The average patient spent 63 minutes and 13 € on travelling per contact, corresponding to a total of 4.6 hours and 56 € during the 3-month period. There was great variation in patient travel time and costs, but no statistically significant associations were found with clinical and sociodemographic characteristics. Conclusion. The results show that patients with RA spend private time and costs on travelling when they seek treatment. These findings are particularly important when analyzing social costs associated with RA.

Land use impacts on transport : how land use factors affect travel behavior

Energy Technology Data Exchange (ETDEWEB)

Litman, T.

2005-11-16

The relationship between land use patterns and travel behaviour was examined with reference to the ability of land use management strategies to achieve transportation planning objectives. The study examined how land use factors such as density, regional accessibility, roadway connectivity affect per capita motor vehicle ownership and use; mode split; non-motorized travel; and accessibility by people who are physically or economically disadvantaged. The social, economic and environmental impacts that result from higher travel were discussed with reference to the degree to which conventional planning accounts for this increased travel. Alternatives for improving mobility in urban and suburban areas were presented. It was concluded that travel behaviour can change by promoting more efficient use of existing roadway capacity, by improving travel options and providing incentives to use alternative transport modes. It was suggested that strategies such as Smart Growth and New Urbanism can be applied in a variety of land use scenarios, including urban, suburban and rural areas to help achieve transportation planning objectives. 122 refs., 16 tabs., 12 figs.

The Archaeology of Time travel – An introduction

OpenAIRE

Petersson, Bodil; Holtorf, Cornelius

2010-01-01

This article introduces the concept of Time Travel as a new way to approach the past in our age. The article deals with the question: What role does the past play for people in our time? The time travel discussion focusses on the following themes: Time travel between materality and virtuality; Time travel on the market of experiences; Designing time travel; Evaluating time travel.

Time - A Traveler's Guide

Science.gov (United States)

Pickover, Clifford A.

1999-09-01

"Bucky Fuller thought big," Wired magazine recently noted, "Arthur C. Clarke thinks big, but Cliff Pickover outdoes them both." In his newest book, Cliff Pickover outdoes even himself, probing a mystery that has baffled mystics, philosophers, and scientists throughout history--What is the nature of time?In Time: A Traveler's Guide , Pickover takes readers to the forefront of science as he illuminates the most mysterious phenomenon in the universe--time itself. Is time travel possible? Is time real? Does it flow in one direction only? Does it have a beginning and an end? What is eternity? Pickover's book offers a stimulating blend of Chopin, philosophy, Einstein, and modern physics, spiced with diverting side-trips to such topics as the history of clocks, the nature of free will, and the reason gold glitters. Numerous diagrams ensure readers will have no trouble following along.By the time we finish this book, we understand a wide variety of scientific concepts pertaining to time. And most important, we will understand that time travel is, indeed, possible.

5 CFR 551.422 - Time spent traveling.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Time spent traveling. 551.422 Section 551... Activities § 551.422 Time spent traveling. (a) Time spent traveling shall be considered hours of work if: (1... who is permitted to use an alternative mode of transportation, or an employee who travels at a time...

Ground-water travel time

International Nuclear Information System (INIS)

Bentley, H.; Grisak, G.

1985-01-01

The Containment and Isolation Working Group considered issues related to the postclosure behavior of repositories in crystalline rock. This working group was further divided into subgroups to consider the progress since the 1978 GAIN Symposium and identify research needs in the individual areas of regional ground-water flow, ground-water travel time, fractional release, and cumulative release. The analysis and findings of the Ground-Water Travel Time Subgroup are presented

Inter-temporal variation in the travel time and travel cost parameters of transport models

OpenAIRE

Börjesson, Maria

2012-01-01

The parameters for travel time and travel cost are central in travel demand forecasting models. Since valuation of infrastructure investments requires prediction of travel demand for future evaluation years, inter-temporal variation of the travel time and travel cost parameters is a key issue in forecasting. Using two identical stated choice experiments conducted among Swedish drivers with an interval of 13 years, 1994 and 2007, this paper estimates the inter-temporal variation in travel time...

Time travel in Goedel's space

International Nuclear Information System (INIS)

Pfarr, J.

1981-01-01

An analysis is presented of the motion of test particles in Goedel's universe. Both geodesical and nongeodesical motions are considered; the accelerations for nongeodesical motions are given. Examples for closed timelike world lines are shown and the dynamical conditions for time travel in Goedel's space-time are discussed. It is shown that these conditions alone do not suffice to exclude time travel in Goedel's space-time. (author)

49 CFR 214.353 - Training and qualification of roadway workers who provide on-track safety for roadway work groups.

Science.gov (United States)

2010-10-01

... RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.353 Training and qualification of roadway workers who provide on-track safety for roadway work groups. (a) The training and qualification of roadway... 49 Transportation 4 2010-10-01 2010-10-01 false Training and qualification of roadway workers who...

An Optimization Method of Time Window Based on Travel Time and Reliability

Directory of Open Access Journals (Sweden)

Fengjie Fu

2015-01-01

Full Text Available The dynamic change of urban road travel time was analyzed using video image detector data, and it showed cyclic variation, so the signal cycle length at the upstream intersection was conducted as the basic unit of time window; there was some evidence of bimodality in the actual travel time distributions; therefore, the fitting parameters of the travel time bimodal distribution were estimated using the EM algorithm. Then the weighted average value of the two means was indicated as the travel time estimation value, and the Modified Buffer Time Index (MBIT was expressed as travel time variability; based on the characteristics of travel time change and MBIT along with different time windows, the time window was optimized dynamically for minimum MBIT, requiring that the travel time change be lower than the threshold value and traffic incidents can be detected real time; finally, travel times on Shandong Road in Qingdao were estimated every 10 s, 120 s, optimal time windows, and 480 s and the comparisons demonstrated that travel time estimation in optimal time windows can exactly and steadily reflect the real-time traffic. It verifies the effectiveness of the optimization method.

Technological and mining analysis of mechanized systems used in roadways in Polish mines

Energy Technology Data Exchange (ETDEWEB)

Sikora, W; Giza, T; Siwiec, J [Politechnika Slaska, Gliwice (Poland). Instytut Mechanizacji Gornictwa

1987-01-01

Analyzes methods of mine drivage in Poland and materials handling systems. Of 1,620 km of roadways driven in 1982, 12% fell on roadways driven in coal and 88% on roadways driven in stone or stone and coal. Roadways driven in coal in most cases were situated at depths from 500 to 700 m. Roadway cross-section ranged from 12 to 18 m{sup 2}. Roadways in stone or stone and coal were driven by drilling and blasting. Loaders were used for stone handling. Roadways in coal were driven by heading machines. Advance rates of mine drivage by heading machines were 2 to 3 times higher than those by drilling and blasting with loaders for stone handling. Basic statistical data characterizing roadways and drivage methods are evaluated: roadway dimensions and depth advance rate depending on drivage methods and mining condition, types of heading machines and loaders.

RP and SP Data-Based Travel Time Reliabiality Analysis

OpenAIRE

Lu, Ming

2013-01-01

Travel time is considered to be the key criterion when making travel related decisions. As the travel decisions are made in a dynamic environment, the travel time also changes according to the real-time operations of the transport system. More and more evidence proves that travellers are not only interested in the expected travel time but also in travel time reliability. Especially for trips that are made regularly, reliability is valued more than travel time itself. This dissertation focuses...

Empirical Study of Travel Time Estimation and Reliability

OpenAIRE

Li, Ruimin; Chai, Huajun; Tang, Jin

2013-01-01

This paper explores the travel time distribution of different types of urban roads, the link and path average travel time, and variance estimation methods by analyzing the large-scale travel time dataset detected from automatic number plate readers installed throughout Beijing. The results show that the best-fitting travel time distribution for different road links in 15 min time intervals differs for different traffic congestion levels. The average travel time for all links on all days can b...

Designing Yellow Intervals for Rainy and Wet Roadway Conditions

Directory of Open Access Journals (Sweden)

Huan Li

2012-06-01

Full Text Available The research presented in this paper quantifies and models the impact of wet pavement surface and rainy weather conditions on driver perception-reaction times (PRTs, deceleration levels, and traffic signal change interval durations. A total of 648 stop-run records were collected as part of the research effort for a 72 km/h (45 mi/h approach speed where participant drivers encountered a yellow indication initiation at different distances from the intersection. The participant drivers were randomly selected in different age groups (under 40 years old, 40 to 59 years old, and 60 years of age or older and genders (female and male. Using the gathered data, statistical models for driver PRT and deceleration levels were developed, considering roadway surface and environmental parameters, driver attributes (age and gender, roadway grade, approaching speed, and time and distance to the intersection at the onset of yellow. Inclement weather yellow timings were then developed and summarized in lookup tables as a function of different factors (driver age/gender, roadway grade, speed limit, precipitation level, and roadway surface condition to provide practical guidelines for the design of yellow signal timings in wet and rainy weather conditions. The results indicate that wet roadway surface conditions require a 5 percent increase in the change interval and that rainy conditions require a 10 percent or more increase in the duration of the change interval. These recommended change durations can also be integrated within the Vehicle Infrastructure Integration (VII initiative to provide customizable driver warnings prior to a transition to a red indication.

A constant travel time budget? In search for explanations for an increase in average travel time

NARCIS (Netherlands)

Rietveld, P.; Wee, van B.

2002-01-01

Recent research suggests that during the past decades the average travel time of the Dutch population has probably increased. However, different datasources show different levels of increase. Possible causes of the increase in average travel time are presented here. Increased incomes have

The effects of roadway characteristics on farm equipment crashes: A GIS approach

Science.gov (United States)

Greenan, Mitchell Joseph

Tractors and other self-propelled farm equipment, such as combines, sprayers, and towed grain carts, are often used on public roadways as the primary means for traveling from homestead to homestead or from homestead to a distributer. Increased roadway exposure has led to a growing concern for crashes involving farm equipment on the public roadway. A handful of studies exist examining public roadway crashes involving farm equipment using crash data, but none thus far have evaluated road segment data to identify road-specific risk factors. The objective of this study is to identify if roadway characteristics (traffic density, speed limit, road type, surface type, road width, and shoulder width) affect the risk of a crash involving farm equipment on Iowa public roadways. A retrospective cohort study of Iowa roads was conducted to identify the types of roads that are at an increased risk of having a farm-equipment crash on them. Crash data from the Iowa Department of Transportation (to identify crashes) were spatial linked to Iowa roadway data using Geographic Information Systems (GIS). Logistic regression was used to calculate ORs and 95% CL. Out of 319,705 road segments in Iowa, 0.4% segments (n=1,337) had a farm equipment crash from 2005-2011. The odds of having a farm equipment crash were significantly higher for road segments with increased traffic density and speed limit. Roads with an average daily traffic volume of at least 1,251 vehicles were at a 5.53 times greater odds of having a crash than roads with a daily traffic volume between 0-30 vehicles. (CI: 3.90-7.83). Roads with a posted speed limit between 50mph and 60mph were at a 4.88 times greater odds of having a crash than roads with a posted speed limit of 30mph or less. (CI: 3.85-6.20). Specific roadway characteristics such as roadway and shoulder width were also associated with the risk of a crash. For every 5 foot increase in road width, the odds for a crash decreased by 6 percent (CI: 0.89-0.99) and

Lighting and vegetation for energy-efficient and safe roadway travel : final report (1,015.15 KB)

Science.gov (United States)

2009-05-01

The objective of the present study was to identify and evaluate promising approaches to incorporating : lighting and vegetation along roadways with the purpose of identifying the most promising application that : could be incorporated into a demonstr...

49 CFR 214.341 - Roadway maintenance machines.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Roadway maintenance machines. 214.341 Section 214... Roadway maintenance machines. (a) Each employer shall include in its on-track safety program specific provisions for the safety of roadway workers who operate or work near roadway maintenance machines. Those...

The Role of Perspective in Mental Time Travel.

Science.gov (United States)

Ansuini, Caterina; Cavallo, Andrea; Pia, Lorenzo; Becchio, Cristina

2016-01-01

Recent years have seen accumulating evidence for the proposition that people process time by mapping it onto a linear spatial representation and automatically "project" themselves on an imagined mental time line. Here, we ask whether people can adopt the temporal perspective of another person when travelling through time. To elucidate similarities and differences between time travelling from one's own perspective or from the perspective of another person, we asked participants to mentally project themselves or someone else (i.e., a coexperimenter) to different time points. Three basic properties of mental time travel were manipulated: temporal location (i.e., where in time the travel originates: past, present, and future), motion direction (either backwards or forwards), and temporal duration (i.e., the distance to travel: one, three, or five years). We found that time travels originating in the present lasted longer in the self- than in the other-perspective. Moreover, for self-perspective, but not for other-perspective, time was differently scaled depending on where in time the travel originated. In contrast, when considering the direction and the duration of time travelling, no dissimilarities between the self- and the other-perspective emerged. These results suggest that self- and other-projection, despite some differences, share important similarities in structure.

Commuters’ valuation of travel time variability in Barcelona

OpenAIRE

Javier Asensio; Anna Matas

2007-01-01

The value given by commuters to the variability of travel times is empirically analysed using stated preference data from Barcelona (Spain). Respondents are asked to choose between alternatives that differ in terms of cost, average travel time, variability of travel times and departure time. Different specifications of a scheduling choice model are used to measure the influence of various socioeconomic characteristics. Our results show that travel time variability.

Roadway network productivity assessment : system-wide analysis under variant travel demand

Science.gov (United States)

2008-11-01

The analysis documented in this report examines the hypothesis that the system-wide productivity of a metropolitan freeway system in peak periods is higher in moderate travel demand conditions than in excessive travel demand conditions. The approach ...

Travel time variability and airport accessibility

OpenAIRE

Koster, P.R.; Kroes, E.P.; Verhoef, E.T.

2010-01-01

This discussion paper resulted in a publication in Transportation Research Part B: Methodological (2011). Vol. 45(10), pages 1545-1559. This paper analyses the cost of access travel time variability for air travelers. Reliable access to airports is important since it is likely that the cost of missing a flight is high. First, the determinants of the preferred arrival times at airports are analyzed, including trip purpose, type of airport, flight characteristics, travel experience, type of che...

Multiple-Factor Based Sparse Urban Travel Time Prediction

Directory of Open Access Journals (Sweden)

Xinyan Zhu

2018-02-01

Full Text Available The prediction of travel time is challenging given the sparseness of real-time traffic data and the uncertainty of travel, because it is influenced by multiple factors on the congested urban road networks. In our paper, we propose a three-layer neural network from big probe vehicles data incorporating multi-factors to estimate travel time. The procedure includes the following three steps. First, we aggregate data according to the travel time of a single taxi traveling a target link on working days as traffic flows display similar traffic patterns over a weekly cycle. We then extract feature relationships between target and adjacent links at 30 min interval. About 224,830,178 records are extracted from probe vehicles. Second, we design a three-layer artificial neural network model. The number of neurons in input layer is eight, and the number of neurons in output layer is one. Finally, the trained neural network model is used for link travel time prediction. Different factors are included to examine their influence on the link travel time. Our model is verified using historical data from probe vehicles collected from May to July 2014 in Wuhan, China. The results show that we could obtain the link travel time prediction results using the designed artificial neural network model and detect the influence of different factors on link travel time.

Multimodal Network Equilibrium with Stochastic Travel Times

Directory of Open Access Journals (Sweden)

M. Meng

2014-01-01

Full Text Available The private car, unlike public traffic modes (e.g., subway, trolley running along dedicated track-ways, is invariably subject to various uncertainties resulting in travel time variation. A multimodal network equilibrium model is formulated that explicitly considers stochastic link capacity variability in the road network. The travel time of combined-mode trips is accumulated based on the concept of the mean excess travel time (METT which is a summation of estimated buffer time and tardy time. The problem is characterized by an equivalent VI (variational inequality formulation where the mode choice is expressed in a hierarchical logit structure. Specifically, the supernetwork theory and expansion technique are used herein to represent the multimodal transportation network, which completely represents the combined-mode trips as constituting multiple modes within a trip. The method of successive weighted average is adopted for problem solutions. The model and solution method are further applied to study the trip distribution and METT variations caused by the different levels of the road conditions. Results of numerical examples show that travelers prefer to choose the combined travel mode as road capacity decreases. Travelers with different attitudes towards risk are shown to exhibit significant differences when making travel choice decisions.

Accuracy of Travel Time Estimation using Bluetooth Technology

DEFF Research Database (Denmark)

Araghi, Bahar Namaki; Skoven Pedersen, Kristian; Tørholm Christensen, Lars

2012-01-01

Short-term travel time information plays a critical role in Advanced Traffic Information Systems (ATIS) and Advanced Traffic Management Systems (ATMS). In this context, the need for accurate and reliable travel time information sources is becoming increasingly important. Bluetooth Technology (BT......) has been used as a relatively new cost-effective source of travel time estimation. However, due to low sampling rate of BT compared to other sensor technologies, existence of outliers may significantly affect the accuracy and reliability of the travel time estimates obtained using BT. In this study......, the concept of outliers and corresponding impacts on travel time accuracy are discussed. Four different estimators named Min-BT, Max-BT, Med-BT and Avg-BT with different outlier detection logic are presented in this paper. These methods are used to estimate travel times using a BT derived dataset. In order...

Valuation of travel time savings for intercity travel: The Madrid-Barcelona corridor

DEFF Research Database (Denmark)

Roman, Concepcion; Carlos Martin, Juan; Espino, Raquel

2014-01-01

We derive values of travel time savings (VOT) for the Madrid-Barcelona corridor, linking the two largest cities in Spain, based on the estimation of discrete choice models among the main public transport services in the corridor: air transport, high speed rail (HSR) and bus. The new HSR alternative...... (which started to operate in February 2008) competes directly with one of the densest airline domestic markets in the world, and its introduction produced substantial improvements in level of service, achieving reductions in travel time of more than 50% over the conventional train. A specifically...... to provide useful information to quantify users' benefits during the lifespan of a given project. We found, as expected, that HSR and air transport users exhibit substantially higher values for saving travel time than bus travellers. Also as expected, savings of waiting time are more valued than savings...

Macroscopic travel time reliability diagrams for freeway networks

NARCIS (Netherlands)

Tu, H.; Li, H.; Van Lint, J.W.C.; Knoop, V.L.; Sun, L.

2013-01-01

Travel time reliability is considered to be one of the key indicators of transport system performance. Knowledge of the mechanisms of travel time unreliability enables the derivation of explanatory models with which travel time reliability can be predicted and utilized in traffic management.

Travel time variability and airport accessibility

NARCIS (Netherlands)

Koster, P.R.; Kroes, E.P.; Verhoef, E.T.

2011-01-01

We analyze the cost of access travel time variability for air travelers. Reliable access to airports is important since the cost of missing a flight is likely to be high. First, the determinants of the preferred arrival times at airports are analyzed. Second, the willingness to pay (WTP) for

How to build a time machine: the real science of time travel

CERN Document Server

Clegg, Brian

2013-01-01

A pop science look at time travel technology, from Einstein to Ronald Mallett to present day experiments. Forget fiction: time travel is real.In How to Build a Time Machine, Brian Clegg provides an understanding of what time is and how it can be manipulated. He explores the fascinating world of physics and the remarkable possibilities of real time travel that emerge from quantum entanglement, superluminal speeds, neutron star cylinders and wormholes in space. With the fascinating paradoxes of time travel echoing in our minds will we realize that travel into the future might never be possible? Or will we realize there is no limit on what can be achieved, and take on this ultimate challenge? Only time will tell.

Ocean acoustic tomography - Travel time biases

Science.gov (United States)

Spiesberger, J. L.

1985-01-01

The travel times of acoustic rays traced through a climatological sound-speed profile are compared with travel times computed through the same profile containing an eddy field. The accuracy of linearizing the relations between the travel time difference and the sound-speed deviation at long ranges is assessed using calculations made for two different eddy fields measured in the eastern Atlantic. Significant nonlinearities are found in some cases, and the relationships of the values of these nonlinearities to the range between source and receiver, to the anomaly size associated with the eddies, and to the positions of the eddies are studied. An analytical model of the nonlinearities is discussed.

Urban travel time reliability at different traffic conditions

NARCIS (Netherlands)

Zheng, Fangfang; Li, Jie; van Zuylen, H.J.; Liu, Xiaobo; Yang, Hongtai

2017-01-01

The decision making of travelers for route choice and departure time choice depends on the expected travel time and its reliability. A common understanding of reliability is that it is related to several statistical properties of the travel time distribution, especially to the standard deviation

A microlevel analysis of residential context and travel time

OpenAIRE

Tim Schwanen; Martin Dijst; Frans M Dieleman

2002-01-01

The literature on the association between residential context and travel concentrates on distance traveled and modal choice, as these variables are the most important from an environmental perspective. Travel time has received less attention -- an unfortunate oversight in our view, as people's travel decisions are determined by time rather than by distance. By using data from the 1998 Netherlands National Travel Survey, we have considered travel time associated with trip purpose and transport...

An Optimization Method of Time Window Based on Travel Time and Reliability

OpenAIRE

Fu, Fengjie; Ma, Dongfang; Wang, Dianhai; Qian, Wei

2015-01-01

The dynamic change of urban road travel time was analyzed using video image detector data, and it showed cyclic variation, so the signal cycle length at the upstream intersection was conducted as the basic unit of time window; there was some evidence of bimodality in the actual travel time distributions; therefore, the fitting parameters of the travel time bimodal distribution were estimated using the EM algorithm. Then the weighted average value of the two means was indicated as the travel t...

Time travel a history

CERN Document Server

Gleick, James

2016-01-01

From the acclaimed author of The Information and Chaos, here is a mind-bending exploration of time travel: its subversive origins, its evolution in literature and science, and its influence on our understanding of time itself. The story begins at the turn of the previous century, with the young H. G. Wells writing and rewriting the fantastic tale that became his first book and an international sensation: The Time Machine. It was an era when a host of forces was converging to transmute the human understanding of time, some philosophical and some technological: the electric telegraph, the steam railroad, the discovery of buried civilizations, and the perfection of clocks. James Gleick tracks the evolution of time travel as an idea that becomes part of contemporary culture—from Marcel Proust to Doctor Who, from Jorge Luis Borges to Woody Allen. He investigates the inevitable looping paradoxes and examines the porous boundary between pulp fiction and modern physics. Finally, he delves into a temporal shift that...

Value of travel time savings

DEFF Research Database (Denmark)

Le Masurier, P.; Polak, J.; Pawlak, Janet

2015-01-01

A team of specialist market researchers and Value of Time experts comprising members from SYSTRA, Imperial College London and the Technical University of Denmark has conducted a formal audit and peer review of research undertaken by Arup/ITS Leeds/Accent to derive Value of Travel Time Savings...... Preference (RP) models that were used to derive final Values of Travel Time (VTT). This report contains the findings of our audit and peer review of the procedures adopted by the research team during data collection of the three surveys (SP, RP and Employers Surveys); a peer review of the reported approach...

Parsimonious wave-equation travel-time inversion for refraction waves

KAUST Repository

Fu, Lei

2017-02-14

We present a parsimonious wave-equation travel-time inversion technique for refraction waves. A dense virtual refraction dataset can be generated from just two reciprocal shot gathers for the sources at the endpoints of the survey line, with N geophones evenly deployed along the line. These two reciprocal shots contain approximately 2N refraction travel times, which can be spawned into O(N2) refraction travel times by an interferometric transformation. Then, these virtual refraction travel times are used with a source wavelet to create N virtual refraction shot gathers, which are the input data for wave-equation travel-time inversion. Numerical results show that the parsimonious wave-equation travel-time tomogram has about the same accuracy as the tomogram computed by standard wave-equation travel-time inversion. The most significant benefit is that a reciprocal survey is far less time consuming than the standard refraction survey where a source is excited at each geophone location.

Geostatistical evaluation of travel time uncertainties

International Nuclear Information System (INIS)

Devary, J.L.

1983-08-01

Data on potentiometric head and hydraulic conductivity, gathered from the Wolfcamp Formation of the Permian System, have exhibited tremendous spatial variability as a result of heterogeneities in the media and the presence of petroleum and natural gas deposits. Geostatistical data analysis and error propagation techniques (kriging and conditional simulation) were applied to determine the effect of potentiometric head uncertainties on radionuclide travel paths and travel times through the Wolfcamp Formation. Blok-average kriging was utilized to remove measurement error from potentiometric head data. The travel time calculations have been enhanced by the use of an inverse technique to determine the relative hydraulic conductivity along travel paths. In this way, the spatial variability of the hydraulic conductivity corresponding to streamline convergence and divergence may be included in the analysis. 22 references, 11 figures, 1 table

Time machine tales the science fiction adventures and philosophical puzzles of time travel

CERN Document Server

Nahin, Paul J

2017-01-01

This book contains a broad overview of time travel in science fiction, along with a detailed examination of the philosophical implications of time travel. The emphasis of this book is now on the philosophical and on science fiction, rather than on physics, as in the author's earlier books on the subject. In that spirit there are, for example, no Tech Notes filled with algebra, integrals, and differential equations, as there are in the first and second editions of TIME MACHINES. Writing about time travel is, today, a respectable business. It hasn’t always been so. After all, time travel, prima facie, appears to violate a fundamental law of nature; every effect has a cause, with the cause occurring before the effect. Time travel to the past, however, seems to allow, indeed to demand, backwards causation, with an effect (the time traveler emerging into the past as he exits from his time machine) occurring before its cause (the time traveler pushing the start button on his machine’s control panel to start his...

Dynamic travel time estimation using regression trees.

Science.gov (United States)

2008-10-01

This report presents a methodology for travel time estimation by using regression trees. The dissemination of travel time information has become crucial for effective traffic management, especially under congested road conditions. In the absence of c...

Effectiveness of different approaches to disseminating traveler information on travel time reliability. [supporting datasets

Science.gov (United States)

2013-11-30

Travel time reliability information includes static data about traffic speeds or trip times that capture historic variations from day to day, and it can help individuals understand the level of variation in traffic. Unlike real-time travel time infor...

Predicting travel time variability for cost-benefit analysis

NARCIS (Netherlands)

Peer, S.; Koopmans, C.; Verhoef, E.T.

2010-01-01

Unreliable travel times cause substantial costs to travelers. Nevertheless, they are not taken into account in many cost-benefit-analyses (CBA), or only in very rough ways. This paper aims at providing simple rules on how variability can be predicted, based on travel time data from Dutch highways.

Highway travel time estimation with data fusion

CERN Document Server

Soriguera Martí, Francesc

2016-01-01

This monograph presents a simple, innovative approach for the measurement and short-term prediction of highway travel times based on the fusion of inductive loop detector and toll ticket data. The methodology is generic and not technologically captive, allowing it to be easily generalized for other equivalent types of data. The book shows how Bayesian analysis can be used to obtain fused estimates that are more reliable than the original inputs, overcoming some of the drawbacks of travel-time estimations based on unique data sources. The developed methodology adds value and obtains the maximum (in terms of travel time estimation) from the available data, without recurrent and costly requirements for additional data. The application of the algorithms to empirical testing in the AP-7 toll highway in Barcelona proves that it is possible to develop an accurate real-time, travel-time information system on closed-toll highways with the existing surveillance equipment, suggesting that highway operators might provide...

Incorporating activity-travel time uncertainty and stochastic space-time prisms in multistate supernetworks for activity-travel scheduling

NARCIS (Netherlands)

Liao, F.; Rasouli, S.; Timmermans, H.J.P.

2014-01-01

Multistate supernetwork approach has been advanced recently to study multimodal, multi-activity travel behavior. The approach allows simultaneously modeling multiple choice facets pertaining to activity-travel scheduling behavior, subject to space-time constraints, in the context of full daily

49 CFR 236.929 - Training specific to roadway workers.

Science.gov (United States)

2010-10-01

... themselves or roadway work groups. (b) What subject areas must roadway worker training include? (1... control equipment in establishing protection for roadway workers and their equipment. (2) Instruction for roadway workers must ensure recognition of processor-based signal and train control equipment on the...

Value of freeway travel time information

OpenAIRE

Soriguera Martí, Francesc

2013-01-01

This paper analyzes the value of highway travel time information systems. This is achieved by using notions of expected utility theory to develop a departure time selection and route choice model. The model assumes that every driver has a level of accepted lateness for his trip and some perceived knowledge of the travel times on the route. Only these two inputs support his decisions. The decision making process does not require the consideration of a complex cost function and does not involve...

Trip-oriented travel time prediction (TOTTP) with historical vehicle trajectories

Science.gov (United States)

Xu, Tao; Li, Xiang; Claramunt, Christophe

2018-06-01

Accurate travel time prediction is undoubtedly of importance to both traffic managers and travelers. In highly-urbanized areas, trip-oriented travel time prediction (TOTTP) is valuable to travelers rather than traffic managers as the former usually expect to know the travel time of a trip which may cross over multiple road sections. There are two obstacles to the development of TOTTP, including traffic complexity and traffic data coverage.With large scale historical vehicle trajectory data and meteorology data, this research develops a BPNN-based approach through integrating multiple factors affecting trip travel time into a BPNN model to predict trip-oriented travel time for OD pairs in urban network. Results of experiments demonstrate that it helps discover the dominate trends of travel time changes daily and weekly, and the impact of weather conditions is non-trivial.

5 CFR 610.123 - Travel on official time.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Travel on official time. 610.123 Section... DUTY Weekly and Daily Scheduling of Work Work Schedules § 610.123 Travel on official time. Insofar as practicable travel during nonduty hours shall not be required of an employee. When it is essential that this...

Wireless data collection system for real-time arterial travel time estimates.

Science.gov (United States)

2011-03-01

This project pursued several objectives conducive to the implementation and testing of a Bluetooth (BT) based system to collect travel time data, including the deployment of a BT-based travel time data collection system to perform comprehensive testi...

49 CFR 214.345 - Training for all roadway workers.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Training for all roadway workers. 214.345 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.345 Training for all roadway workers. The training of all roadway workers shall include, as a minimum, the...

Principles of valuing business travel time savings

OpenAIRE

Fowkes, A.S.

2001-01-01

OVERVIEW\\ud \\ud There are two approaches to valuing travel time savings to business people. The first is that which has formed the basis of UK policy for about 30 years, and which is set out in Section 2. This takes the value of travel time savings on employer’s business as equal to the gross wage rate plus an allowance for other costs that the employer saves. These might include such things as desk space, computer, tools, uniform, protective clothing, travel expenses. These were investigated...

Assessing the Predictability of Scheduled-Vehicle Travel Times

DEFF Research Database (Denmark)

Tiesyte, Dalia; Jensen, Christian Søndergaard

2009-01-01

One of the most desired and challenging services in collective transport systems is the real-time prediction of the near-future travel times of scheduled vehicles, especially public buses, thus improving the experience of the transportation users, who may be able to better schedule their travel......, and also enabling system operators to perform real-time monitoring. While travel-time prediction has been researched extensively during the past decade, the accuracies of existing techniques fall short of what is desired, and proposed mathematical prediction models are often not transferable to other...... systems because the properties of the travel-time-related data of vehicles are highly context-dependent, making the models difficult to fit. We propose a framework for evaluating various predictability types of the data independently of the model, and we also compare predictability analysis results...

Apparatus, System, And Method For Roadway Monitoring

KAUST Repository

Claudel, Christian G.

2015-06-02

An apparatus, system, and method for monitoring traffic and roadway water conditions. Traffic flow and roadway flooding is monitored concurrently through a wireless sensor network. The apparatus and system comprises ultrasound rangefinders monitoring traffic flow, flood water conditions, or both. Routing information may be calculated from the traffic conditions, such that routes are calculated to avoid roadways that are impassable or are slow due to traffic conditions.

Apparatus, System, And Method For Roadway Monitoring

KAUST Repository

Claudel, Christian G.

2015-01-01

An apparatus, system, and method for monitoring traffic and roadway water conditions. Traffic flow and roadway flooding is monitored concurrently through a wireless sensor network. The apparatus and system comprises ultrasound rangefinders monitoring traffic flow, flood water conditions, or both. Routing information may be calculated from the traffic conditions, such that routes are calculated to avoid roadways that are impassable or are slow due to traffic conditions.

Travel Time Reliability for Urban Networks : Modelling and Empirics

NARCIS (Netherlands)

Zheng, F.; Liu, Xiaobo; van Zuylen, H.J.; Li, Jie; Lu, Chao

2017-01-01

The importance of travel time reliability in traffic management, control, and network design has received a lot of attention in the past decade. In this paper, a network travel time distribution model based on the Johnson curve system is proposed. The model is applied to field travel time data

Underground roadway drivage with heading machines in Indian coal industry

Energy Technology Data Exchange (ETDEWEB)

Mukherjee, T.K.

1983-03-01

Heading machines have assumed a very important place in underground roadway drivage. They are not only a compromise between ''drill-and-blast'' technique and full-face machines, but are also an economic and versatile form of mechanised roadway drivage. Since the advantages gained by heading machines are considerable, the use of these machines is becoming popular in underground roadway drivage. Experience with continuous miner and heading machines in Indian coal mines is very limited compared to that of Western countries. In 1964-65, for the first time, two units of Lee Norse Miner were used at Kunostoria Colliery of Bengal Coal Company. In 1966, two units of Joy Continuous Miner were introduced at Chalkari Colliery of National Coal Development Corporation, but had to be adandoned because of heavy make of water at the installation site. A Russian PK-3 heading machine was used limitedly during the development of Banki Colliery, Madhya Pradesh. A Demag Unicorn VS-1 machine operated for the development of roadways at Jitpur and Chasnala Collieries of IISCO between 1967-70. With this machine, progress of 7 m per day was attained in level roadways and of about 2 m per day in steep raises.

Travel time reliability modeling.

Science.gov (United States)

2011-07-01

This report includes three papers as follows: : 1. Guo F., Rakha H., and Park S. (2010), "A Multi-state Travel Time Reliability Model," : Transportation Research Record: Journal of the Transportation Research Board, n 2188, : pp. 46-54. : 2. Park S.,...

Valuation of travel time for international long-distance travel - results from the Fehmarn Belt stated choice experiment

DEFF Research Database (Denmark)

Mabit, Stefan Lindhard; Rich, Jeppe; Burge, Peter

2013-01-01

of travel time savings (VTTS). The final model, which was formulated as a nested logit model and included Box–Cox transformed travel time and cost attributes, revealed several interesting findings. Firstly, we found damping effects in both cost and time – most strongly in cost. Secondly, we found...... significant interactions among travel cost and time, and journey characteristics, such as distance and duration. This had direct impact on the VTTS, which was shown to decrease with distance and duration. Thirdly, we found that air travel implies a higher average VTTS, which is to be expected but rarely......The geographical scope of travel varies from short distances in urban areas to long distances across cities and countries. While urban travel has been widely analysed in the literature, travel over longer distances and particularly across countries, has received much less attention. While this may...

The IPERMOB System for Effective Real-Time Road Travel Time Measurement and Prediction

OpenAIRE

Martelli, Francesca; Renda, Maria Elena; Santi, Paolo

2010-01-01

Accurate, real-time measurement and estimation of road travel time is considered a central problem in the design of advanced Intelligent Transportation Systems. In particular, whether eective, real-time collection of travel time measurements in a urban area is possible is, to the best of our knowledge, still an open problem. In this paper, we introduce the IPERMOB system for efficient, real-time collection of travel time measurements in urban areas through vehicular networks. We demonstrate t...

The meandering mind: vection and mental time travel.

Directory of Open Access Journals (Sweden)

Lynden K Miles

Full Text Available BACKGROUND: The ability to travel mentally through time sets humans apart from many other species, yet little is known about this core cognitive capacity. In particular, what shapes the passage of the mind's journey through time? Guided by the viewpoint that higher cognitive activity can have a sensory-motor grounding, we explored the possibility that mental time travel is influenced by apparent movement through space. METHODOLOGY/PRINCIPAL FINDINGS: Participants performed a mundane vigilance task, during which they were expected to daydream, while viewing a display that elicited an illusion of self-motion (i.e., vection. Afterwards, the contents of their mind wandering experiences were probed. The results revealed that the direction of apparent motion influenced the temporal focus of mental time travel. While backward vection prompted thinking about the past, forward vection triggered a preponderance of future-oriented thoughts. CONCLUSIONS/SIGNIFICANCE: Consistent with recent evidence that traveling mentally through time entails associated movements in space, the current results demonstrate the converse relationship-apparent movement through space influenced the temporal locus of mental activity. Together, these findings corroborate the viewpoint that mental time travel may be grounded in the embodiment of spatiotemporal information in a bidirectional manner.

A Data Model for Determining Weather's Impact on Travel Time

DEFF Research Database (Denmark)

Andersen, Ove; Torp, Kristian

2016-01-01

Accurate estimating travel times in road networks is a complex task because travel times depends on factors such as the weather. In this paper, we present a generic model for integrating weather data with GPS data to improve the accuracy of the estimated travel times. First, we present a data model...... for storing and map-matching GPS data, and integrating this data with detailed weather data. The model is generic in the sense that it can be used anywhere GPS data and weather data is available. Next, we analyze the correlation between travel time and the weather classes dry, fog, rain, and snow along...... with winds impact on travel time. Using a data set of 1.6 billion GPS records collected from 10,560 vehicles, over a 5 year period from all of Denmark, we show that snow can increase the travel time up to 27% and strong headwind can increase the travel time with up to 19% (compared to dry calm weather...

Online Learning Solutions for Freeway Travel Time Prediction

NARCIS (Netherlands)

Van Lint, J.W.C.

2008-01-01

Providing travel time information to travelers on available route alternatives in traffic networks is widely believed to yield positive effects on individual drive behavior and (route/departure time) choice behavior, as well as on collective traffic operations in terms of, for example, overall time

Variability of Travel Times on New Jersey Highways

Science.gov (United States)

2011-06-01

This report presents the results of a link and path travel time study conducted on selected New Jersey (NJ) highways to produce estimates of the corresponding variability of travel time (VTT) by departure time of the day and days of the week. The tra...

Travel costs associated with flood closures of state highways near Centralia/Chehalis, Washington.

Science.gov (United States)

2014-09-01

This report discusses the travel costs associated with the closure of roads in the greater : Centralia/Chehalis, Washington region due to 100-year flood conditions starting on the Chehalis River. The costs : were computed for roadway closures on I-5,...

Travel time and concurrent-schedule choice: retrospective versus prospective control.

OpenAIRE

Davison, M; Elliffe, D

2000-01-01

Six pigeons were trained on concurrent variable-interval schedules in which two different travel times between alternatives, 4.5 and 0.5 s, were randomly arranged. In Part 1, the next travel time was signaled while the subjects were responding on each alternative. Generalized matching analyses of performance in the presence of the two travel-time signals showed significantly higher response and time sensitivity when the longer travel time was signaled compared to when the shorter time was sig...

Installation of dynamic travel time signs and efforts to obtain and test a graphical route information panel (GRIP) sign in Austin.

Science.gov (United States)

2016-08-01

Graphic Route Information Panel (GRIP) signs use a combination of text, colors, and representative maps of : the roadway system to convey real-time roadway congestion location and severity information. The intent of : this project was to facilitate t...

Analysis of travel time reliability on Indiana interstates.

Science.gov (United States)

2009-09-15

Travel-time reliability is a key performance measure in any transportation system. It is a : measure of quality of travel time experienced by transportation system users and reflects the efficiency : of the transportation system to serve citizens, bu...

A travel time forecasting model based on change-point detection method

Science.gov (United States)

LI, Shupeng; GUANG, Xiaoping; QIAN, Yongsheng; ZENG, Junwei

2017-06-01

Travel time parameters obtained from road traffic sensors data play an important role in traffic management practice. A travel time forecasting model is proposed for urban road traffic sensors data based on the method of change-point detection in this paper. The first-order differential operation is used for preprocessing over the actual loop data; a change-point detection algorithm is designed to classify the sequence of large number of travel time data items into several patterns; then a travel time forecasting model is established based on autoregressive integrated moving average (ARIMA) model. By computer simulation, different control parameters are chosen for adaptive change point search for travel time series, which is divided into several sections of similar state.Then linear weight function is used to fit travel time sequence and to forecast travel time. The results show that the model has high accuracy in travel time forecasting.

Backus-Gilbert inversion of travel time data

Science.gov (United States)

Johnson, L. E.

1972-01-01

Application of the Backus-Gilbert theory for geophysical inverse problems to the seismic body wave travel-time problem is described. In particular, it is shown how to generate earth models that fit travel-time data to within one standard error and having generated such models how to describe their degree of uniqueness. An example is given to illustrate the process.

All-terrain vehicle fatalities on paved roads, unpaved roads, and off-road: Evidence for informed roadway safety warnings and legislation.

Science.gov (United States)

Denning, Gerene M; Jennissen, Charles A

2016-05-18

All-terrain vehicles (ATVs) are designed for off-highway use only, and many of their features create increased risk with roadway travel. Over half of all ATV-related fatalities occur on roadways, and nonfatal roadway crashes result in more serious injuries than those off the road. A number of jurisdictions have passed or have considered legislation allowing ATVs on public roadways, sometimes limiting them to those unpaved, arguing that they are safe for ATVs. However, no studies have determined the epidemiology of ATV-related fatalities on different road surface types. The objective of the study was to compare ATV-related deaths on paved versus unpaved roads and to contrast them with off-road fatalities. Retrospective descriptive and multivariable analyses were performed using U.S. Consumer Product Safety Commission fatality data from 1982 through 2012. After 1998, ATV-related deaths increased at twice the rate on paved versus unpaved roads. Still, 42% of all roadway deaths during the study period occurred on unpaved surfaces. States varied considerably, ranging from 18% to 79% of their ATV-related roadway deaths occurring on unpaved roads. Paved road crashes were more likely than those on unpaved surfaces to involve males, adolescents and younger adults, passengers, and collisions with other vehicles. Both the pattern of other vehicles involved in collisions and which vehicle hit the other were different for the 2 road types. Alcohol use was higher, helmet use was lower, and head injuries were more likely in paved versus unpaved roadway crashes. However, head injuries still occurred in 76% of fatalities on unpaved roads. Helmets were associated with lower proportions of head injuries among riders, regardless of road surface type. Relative to off-road crashes, both paved and unpaved roads were more likely to involve collisions with another vehicle. The vast majority of roadway crashes, however, did not involve a traffic collision on either paved or unpaved roads

Time Travel: Separating Science Fact from Science Fiction.

Science.gov (United States)

Al-Khalili, Jim

2003-01-01

Suggests that the subject of time travel is the best topic to introduce ideas behind some of the most beautiful and fundamental theories about the nature of space and time. Explains the distinction between the two directions of time travel and how relativity theory forced the abandonment of Newtonian notions about the nature of time. (Author/KHR)

A comparative analysis of short-range travel time prediction methods

NARCIS (Netherlands)

Huisken, Giovanni; van Berkum, Eric C.

2003-01-01

Increasing car mobility has lead to an increasing demand for traffic information. This contribution deals with information about travel times. When car drivers are provided with this type of information, the travel times should ideally be the times that they will encounter. As a result travel times

Value of Travel Time Reliability: A review of current evidence

OpenAIRE

Carlos Carrion; David Levinson

2010-01-01

Travel time reliability is a fundamental factor in travel behavior. It represents the temporal uncertainty experienced by users in their movement between any two nodes in a network. The importance of the time reliability depends on the penalties incurred by the users. In road networks, travelers consider the existence of a trip travel time uncertainty in different choice situations (departure time, route, mode, and others). In this paper, a systematic review of the current state of research i...

Mode choice endogeneity in value of travel time estimation

DEFF Research Database (Denmark)

Mabit, Stefan Lindhard; Fosgerau, Mogens

The current way to estimate value of travel time is to use a mode-specific sample and hence to estimate mode-specific value of travel times. This approach raises certain questions concerning how to generalise the values to a population. A problem would be if there is an uncontrolled sample...... selection mechanism. This is the case if there is correlation between mode choice and the value of travel time that is not controlled for by explanatory variables. What could confuse the estimated values is the difficulty to separate mode effects from user effect. An example would be the effect of income...... of travel time we use a stated choice dataset. These data include binary choice within mode for car and bus. The first approach is to use a probit model to model mode choice using instruments and then use this in the estimation of the value of travel time. The second approach is based on the use of a very...

Critical capacity, travel time delays and travel time distribution of rapid mass transit systems

Science.gov (United States)

Legara, Erika Fille; Monterola, Christopher; Lee, Kee Khoon; Hung, Gih Guang

2014-07-01

We set up a mechanistic agent-based model of a rapid mass transit system. Using empirical data from Singapore's unidentifiable smart fare card, we validate our model by reconstructing actual travel demand and duration of travel statistics. We subsequently use this model to investigate two phenomena that are known to significantly affect the dynamics within the RTS: (1) overloading in trains and (2) overcrowding in the RTS platform. We demonstrate that by varying the loading capacity of trains, a tipping point emerges at which an exponential increase in the duration of travel time delays is observed. We also probe the impact on the rail system dynamics of three types of passenger growth distribution across stations: (i) Dirac delta, (ii) uniform and (iii) geometric, which is reminiscent of the effect of land use on transport. Under the assumption of a fixed loading capacity, we demonstrate the dependence of a given origin-destination (OD) pair on the flow volume of commuters in station platforms.

Splitting Travel Time Based on AFC Data: Estimating Walking, Waiting, Transfer, and In-Vehicle Travel Times in Metro System

Directory of Open Access Journals (Sweden)

Yong-Sheng Zhang

2015-01-01

Full Text Available The walking, waiting, transfer, and delayed in-vehicle travel times mainly contribute to route’s travel time reliability in the metro system. The automatic fare collection (AFC system provides huge amounts of smart card records which can be used to estimate all these times distributions. A new estimation model based on Bayesian inference formulation is proposed in this paper by integrating the probability measurement of the OD pair with only one effective route, in which all kinds of times follow the truncated normal distributions. Then, Markov Chain Monte Carlo method is designed to estimate all parameters endogenously. Finally, based on AFC data in Guangzhou Metro, the estimations show that all parameters can be estimated endogenously and identifiably. Meanwhile, the truncated property of the travel time is significant and the threshold tested by the surveyed data is reliable. Furthermore, the superiority of the proposed model over the existing model in estimation and forecasting accuracy is also demonstrated.

[Travel times of patients to ambulatory care physicians in Germany].

Science.gov (United States)

Schang, Laura; Kopetsch, Thomas; Sundmacher, Leonie

2017-12-01

The time needed by patients to get to a doctor's office represents an important indicator of realised access to care. In Germany, findings on travel times are only available from surveys or for some regions. For the first time, this study examines nationwide and physician group-specific travel times in the ambulatory care sector in Germany and describes demographic, supply-side and spatial determinants of variations. Using a full review of patient consultations in the statutory health insurance system from 2009/2010 for 14 physician groups (approximately 518 million cases), case-related travel times by car between patients' places of residence and physician's practices were estimated at the municipal level. Physicians were reached in less than 30 min in 90.8% of cases for primary care physicians and up to 63% of cases for radiologists. Patients between 18 and under 30 years of age travel longer to get to the doctor than other age groups. The average travel time at the county level systematically differs between urban and rural planning areas. In the case of gynecologists, dermatologists and ophthalmologists, the average journey time decreases with increasing physician density at the county level, but remains approximately constant from a recognisable point of inflection. There is no association between primary care physician density and travel time at the district level. Spatial analyses show physician group-specific patterns of regional concentrations with an increased proportion of cases with very long travel times. Patients' travel times are influenced by supply- and demand-side determinants. Interactions between influential determinants should be analysed in depth to examine the extent to which the time travelled is an expression of regional under- or over-supply rather than an expression of patient preferences.

Quantum mechanics of time travel through post-selected teleportation

International Nuclear Information System (INIS)

Lloyd, Seth; Garcia-Patron, Raul; Maccone, Lorenzo; Giovannetti, Vittorio; Shikano, Yutaka

2011-01-01

This paper discusses the quantum mechanics of closed-timelike curves (CTCs) and of other potential methods for time travel. We analyze a specific proposal for such quantum time travel, the quantum description of CTCs based on post-selected teleportation (P-CTCs). We compare the theory of P-CTCs to previously proposed quantum theories of time travel: the theory is inequivalent to Deutsch's theory of CTCs, but it is consistent with path-integral approaches (which are the best suited for analyzing quantum-field theory in curved space-time). We derive the dynamical equations that a chronology-respecting system interacting with a CTC will experience. We discuss the possibility of time travel in the absence of general-relativistic closed-timelike curves, and investigate the implications of P-CTCs for enhancing the power of computation.

Public transport travel time and its variability

OpenAIRE

Mazloumi Shomali, Ehsan

2017-01-01

Executive Summary Public transport agencies around the world are constantly trying to improve the performance of their service, and to provide passengers with a more reliable service. Two major measures to evaluate the performance of a transit system include travel time and travel time variability. Information on these two measures provides operators with a capacity to identify the problematic locations in a transport system and improve operating plans. Likewise, users can benefit through...

Bayesian Nonparametric Model for Estimating Multistate Travel Time Distribution

Directory of Open Access Journals (Sweden)

Emmanuel Kidando

2017-01-01

Full Text Available Multistate models, that is, models with more than two distributions, are preferred over single-state probability models in modeling the distribution of travel time. Literature review indicated that the finite multistate modeling of travel time using lognormal distribution is superior to other probability functions. In this study, we extend the finite multistate lognormal model of estimating the travel time distribution to unbounded lognormal distribution. In particular, a nonparametric Dirichlet Process Mixture Model (DPMM with stick-breaking process representation was used. The strength of the DPMM is that it can choose the number of components dynamically as part of the algorithm during parameter estimation. To reduce computational complexity, the modeling process was limited to a maximum of six components. Then, the Markov Chain Monte Carlo (MCMC sampling technique was employed to estimate the parameters’ posterior distribution. Speed data from nine links of a freeway corridor, aggregated on a 5-minute basis, were used to calculate the corridor travel time. The results demonstrated that this model offers significant flexibility in modeling to account for complex mixture distributions of the travel time without specifying the number of components. The DPMM modeling further revealed that freeway travel time is characterized by multistate or single-state models depending on the inclusion of onset and offset of congestion periods.

Modeling highway travel time distribution with conditional probability models

Energy Technology Data Exchange (ETDEWEB)

Oliveira Neto, Francisco Moraes [ORNL; Chin, Shih-Miao [ORNL; Hwang, Ho-Ling [ORNL; Han, Lee [University of Tennessee, Knoxville (UTK)

2014-01-01

ABSTRACT Under the sponsorship of the Federal Highway Administration's Office of Freight Management and Operations, the American Transportation Research Institute (ATRI) has developed performance measures through the Freight Performance Measures (FPM) initiative. Under this program, travel speed information is derived from data collected using wireless based global positioning systems. These telemetric data systems are subscribed and used by trucking industry as an operations management tool. More than one telemetric operator submits their data dumps to ATRI on a regular basis. Each data transmission contains truck location, its travel time, and a clock time/date stamp. Data from the FPM program provides a unique opportunity for studying the upstream-downstream speed distributions at different locations, as well as different time of the day and day of the week. This research is focused on the stochastic nature of successive link travel speed data on the continental United States Interstates network. Specifically, a method to estimate route probability distributions of travel time is proposed. This method uses the concepts of convolution of probability distributions and bivariate, link-to-link, conditional probability to estimate the expected distributions for the route travel time. Major contribution of this study is the consideration of speed correlation between upstream and downstream contiguous Interstate segments through conditional probability. The established conditional probability distributions, between successive segments, can be used to provide travel time reliability measures. This study also suggests an adaptive method for calculating and updating route travel time distribution as new data or information is added. This methodology can be useful to estimate performance measures as required by the recent Moving Ahead for Progress in the 21st Century Act (MAP 21).

Comparison of Travel-Time and Amplitude Measurements for Deep-Focusing Time-Distance Helioseismology

Science.gov (United States)

Pourabdian, Majid; Fournier, Damien; Gizon, Laurent

2018-04-01

The purpose of deep-focusing time-distance helioseismology is to construct seismic measurements that have a high sensitivity to the physical conditions at a desired target point in the solar interior. With this technique, pairs of points on the solar surface are chosen such that acoustic ray paths intersect at this target (focus) point. Considering acoustic waves in a homogeneous medium, we compare travel-time and amplitude measurements extracted from the deep-focusing cross-covariance functions. Using a single-scattering approximation, we find that the spatial sensitivity of deep-focusing travel times to sound-speed perturbations is zero at the target location and maximum in a surrounding shell. This is unlike the deep-focusing amplitude measurements, which have maximum sensitivity at the target point. We compare the signal-to-noise ratio for travel-time and amplitude measurements for different types of sound-speed perturbations, under the assumption that noise is solely due to the random excitation of the waves. We find that, for highly localized perturbations in sound speed, the signal-to-noise ratio is higher for amplitude measurements than for travel-time measurements. We conclude that amplitude measurements are a useful complement to travel-time measurements in time-distance helioseismology.

Travel time estimation using Bluetooth.

Science.gov (United States)

2015-06-01

The objective of this study was to investigate the feasibility of using a Bluetooth Probe Detection System (BPDS) to : estimate travel time in an urban area. Specifically, the study investigated the possibility of measuring overall congestion, the : ...

How travellers’ schedule their trips under uncertain travel times

DEFF Research Database (Denmark)

Hjorth, Katrine

Travel times play an important role when people decide where, when and how much to travel. But travel times are not always predictable from the traveller’s point of view: They may vary from day to day due to demand fluctuations, weather conditions, accidents and other unforeseen events that cause...... road capacity to decrease. We refer to this uncertainty as travel time variability (TTV). TTV is likely to affect how travellers schedule their trips, since it affects their probability of arriving late at their destination. We would like to account for TTV in traffic models and cost-benefit analyses......, but in practice there are limits to the kinds of behaviour that can be accommodated in such applications. For that reason, we are not solely interested in explaining travellers’ behaviour, but also in whether this behaviour can be approximated by behavioural models that are simple enough to be applied in traffic...

Time Travel in the Library

Science.gov (United States)

Brown, Donna W.

2005-01-01

A Time Travel project in the library gives enthusiasm to students to connect with the past and reinforces their research skills while instilling respect for the past years. The librarian should choose one specific decade to highlight in the library and create an extravaganza that would allow memorabilia from that time period to be located without…

Autodesk Roadway Design for Infraworks 360 essentials

CERN Document Server

Chappell, Eric

2015-01-01

Quickly master InfraWorks Roadway Design with hands-on tutorials Autodesk Roadway Design for InfraWorks 360 Essentials, 2nd Edition allows you to begin designing immediately as you learn the ins and outs of the roadway-specific InfraWorks module. Detailed explanations coupled with hands-on exercises help you get up to speed and quickly and become productive with the module's core features and functions. Compelling screenshots illustrate step-by-step tutorials, and the companion website provides downloadable starting and ending files so you can jump in at any point and compare your work to the

Incorporating travel time reliability into the Highway Capacity Manual.

Science.gov (United States)

2014-01-01

This final report documents the activities performed during SHRP 2 Reliability Project L08: Incorporating Travel Time Reliability into the Highway Capacity Manual. It serves as a supplement to the proposed chapters for incorporating travel time relia...

The impact of travel distance, travel time and waiting time on health-related quality of life of diabetes patients: An investigation in six European countries.

Science.gov (United States)

Konerding, Uwe; Bowen, Tom; Elkhuizen, Sylvia G; Faubel, Raquel; Forte, Paul; Karampli, Eleftheria; Mahdavi, Mahdi; Malmström, Tomi; Pavi, Elpida; Torkki, Paulus

2017-04-01

The effects of travel distance and travel time to the primary diabetes care provider and waiting time in the practice on health-related quality of life (HRQoL) of patients with type 2 diabetes are investigated. Survey data of 1313 persons with type 2 diabetes from six regions in England (274), Finland (163), Germany (254), Greece (165), the Netherlands (354), and Spain (103) were analyzed. Various multiple linear regression analyses with four different EQ-5D-3L indices (English, German, Dutch and Spanish index) as target variables, with travel distance, travel time, and waiting time in the practice as focal predictors and with control for study region, patient's gender, patient's age, patient's education, time since diagnosis, thoroughness of provider-patient communication were computed. Interactions of regions with the remaining five control variables and the three focal predictors were also tested. There are no interactions of regions with control variables or focal predictors. The indices decrease with increasing travel time to the provider and increasing waiting time in the provider's practice. HRQoL of patients with type 2 diabetes might be improved by decreasing travel time to the provider and waiting time in the provider's practice. Copyright © 2017 Elsevier B.V. All rights reserved.

Heterogeneous Data Fusion Method to Estimate Travel Time Distributions in Congested Road Networks.

Science.gov (United States)

Shi, Chaoyang; Chen, Bi Yu; Lam, William H K; Li, Qingquan

2017-12-06

Travel times in congested urban road networks are highly stochastic. Provision of travel time distribution information, including both mean and variance, can be very useful for travelers to make reliable path choice decisions to ensure higher probability of on-time arrival. To this end, a heterogeneous data fusion method is proposed to estimate travel time distributions by fusing heterogeneous data from point and interval detectors. In the proposed method, link travel time distributions are first estimated from point detector observations. The travel time distributions of links without point detectors are imputed based on their spatial correlations with links that have point detectors. The estimated link travel time distributions are then fused with path travel time distributions obtained from the interval detectors using Dempster-Shafer evidence theory. Based on fused path travel time distribution, an optimization technique is further introduced to update link travel time distributions and their spatial correlations. A case study was performed using real-world data from Hong Kong and showed that the proposed method obtained accurate and robust estimations of link and path travel time distributions in congested road networks.

The value of business travel time savings

OpenAIRE

Fowkes, A.S.; Marks, P.; Nash, C.A.

1986-01-01

The value of time savings for business travellers forms a sizeable part of the benefits from trunk road, rail and air transport improvement schemes. It is therefore important to possess appropiate values to place on business travel time savings for evaluation purposes. The normal approach in practice is to adopt the wage rate of the workers in question plus an increment for overheads and non-wage payments. \\ud \\ud In this paper criticisms of this approach are discssed and the implications of ...

Regular transport dynamics produce chaotic travel times.

Science.gov (United States)

Villalobos, Jorge; Muñoz, Víctor; Rogan, José; Zarama, Roberto; Johnson, Neil F; Toledo, Benjamín; Valdivia, Juan Alejandro

2014-06-01

In the hope of making passenger travel times shorter and more reliable, many cities are introducing dedicated bus lanes (e.g., Bogota, London, Miami). Here we show that chaotic travel times are actually a natural consequence of individual bus function, and hence of public transport systems more generally, i.e., chaotic dynamics emerge even when the route is empty and straight, stops and lights are equidistant and regular, and loading times are negligible. More generally, our findings provide a novel example of chaotic dynamics emerging from a single object following Newton's laws of motion in a regularized one-dimensional system.

The impact of travel time on geographic distribution of dialysis patients.

Science.gov (United States)

Kashima, Saori; Matsumoto, Masatoshi; Ogawa, Takahiko; Eboshida, Akira; Takeuchi, Keisuke

2012-01-01

The geographic disparity of prevalence rates among dialysis patients is unclear. We evaluate the association between travel time to dialysis facilities and prevalence rates of dialysis patients living in 1,867 census areas of Hiroshima, Japan. Furthermore, we study the effects of geographic features (mainland or island) on the prevalence rates and assess if these effects modify the association between travel time and prevalence. The study subjects were all 7,374 people that were certified as the "renal disabled" by local governments in 2011. The travel time from each patient to the nearest available dialysis facility was calculated by incorporating both travel time and the capacity of all 98 facilities. The effect of travel time on the age- and sex-adjusted standard prevalence rate (SPR) and 95% confidence intervals (CIs) at each census area was evaluated in two-level Poisson regression models with 1,867 census areas (level 1) nested within 35 towns or cities (level 2). The results were adjusted for area-based parameters of socioeconomic status, urbanity, and land type. Furthermore, the SPR of dialysis patients was calculated in each specific subgroup of population for travel time, land type, and combination of land type and travel time. In the regression analysis, SPR decreased by 5.2% (95% CI: -7.9--2.3) per 10-min increase in travel time even after adjusting for potential confounders. The effect of travel time on prevalence was different in the mainland and island groups. There was no travel time-dependent SPR disparity on the islands. The SPR among remote residents (>30 min from facilities) in the mainland was lower (0.77, 95% CI: 0.71-0.85) than that of closer residents (≤ 30 min; 0.95, 95% CI: 0.92-0.97). The prevalence of dialysis patients was lower among remote residents. Geographic difficulties for commuting seem to decrease the prevalence rate.

Using travel times to simulate multi-dimensional bioreactive transport in time-periodic flows.

Science.gov (United States)

Sanz-Prat, Alicia; Lu, Chuanhe; Finkel, Michael; Cirpka, Olaf A

2016-04-01

In travel-time models, the spatially explicit description of reactive transport is replaced by associating reactive-species concentrations with the travel time or groundwater age at all locations. These models have been shown adequate for reactive transport in river-bank filtration under steady-state flow conditions. Dynamic hydrological conditions, however, can lead to fluctuations of infiltration velocities, putting the validity of travel-time models into question. In transient flow, the local travel-time distributions change with time. We show that a modified version of travel-time based reactive transport models is valid if only the magnitude of the velocity fluctuates, whereas its spatial orientation remains constant. We simulate nonlinear, one-dimensional, bioreactive transport involving oxygen, nitrate, dissolved organic carbon, aerobic and denitrifying bacteria, considering periodic fluctuations of velocity. These fluctuations make the bioreactive system pulsate: The aerobic zone decreases at times of low velocity and increases at those of high velocity. For the case of diurnal fluctuations, the biomass concentrations cannot follow the hydrological fluctuations and a transition zone containing both aerobic and obligatory denitrifying bacteria is established, whereas a clear separation of the two types of bacteria prevails in the case of seasonal velocity fluctuations. We map the 1-D results to a heterogeneous, two-dimensional domain by means of the mean groundwater age for steady-state flow in both domains. The mapped results are compared to simulation results of spatially explicit, two-dimensional, advective-dispersive-bioreactive transport subject to the same relative fluctuations of velocity as in the one-dimensional model. The agreement between the mapped 1-D and the explicit 2-D results is excellent. We conclude that travel-time models of nonlinear bioreactive transport are adequate in systems of time-periodic flow if the flow direction does not change

Time Synchronization Prototype, Server Upgrade Procedure Support and Remote Software Development

Science.gov (United States)

Sanders, Shania R.

2014-01-01

Networks are roadways of communication that connect devices. Like all roadways, there are rules and regulations that govern whatever (information in this case) travels along them. One type of rule that is commonly used is called a protocol. More specifically, a protocol is a standard that specifies how data should be transmitted over a network. The project outlined in this document seeks to implement one protocol in particular, Precision Time Protocol, within the Kennedy Ground Control Subsystem network at Kennedy Space Center. This document also summarizes work completed for server upgrades, remote software developer training and how all three assignments demonstrated the importance of accountability and security.

Heterogeneous Data Fusion Method to Estimate Travel Time Distributions in Congested Road Networks

Directory of Open Access Journals (Sweden)

Chaoyang Shi

2017-12-01

Full Text Available Travel times in congested urban road networks are highly stochastic. Provision of travel time distribution information, including both mean and variance, can be very useful for travelers to make reliable path choice decisions to ensure higher probability of on-time arrival. To this end, a heterogeneous data fusion method is proposed to estimate travel time distributions by fusing heterogeneous data from point and interval detectors. In the proposed method, link travel time distributions are first estimated from point detector observations. The travel time distributions of links without point detectors are imputed based on their spatial correlations with links that have point detectors. The estimated link travel time distributions are then fused with path travel time distributions obtained from the interval detectors using Dempster-Shafer evidence theory. Based on fused path travel time distribution, an optimization technique is further introduced to update link travel time distributions and their spatial correlations. A case study was performed using real-world data from Hong Kong and showed that the proposed method obtained accurate and robust estimations of link and path travel time distributions in congested road networks.

Collection and analysis of 2013-2014 travel time data.

Science.gov (United States)

2017-07-04

This report documents the findings of Planning Study 27, Collection and Analysis of 2013-2014 Travel Time Data, which is a continuation of Planning Study 24, Analysis of Historical Travel Time Data. The main scope is to analyze newly acquired link-re...

Wandering tales: evolutionary origins of mental time travel and language

Science.gov (United States)

Corballis, Michael C.

2013-01-01

A central component of mind wandering is mental time travel, the calling to mind of remembered past events and of imagined future ones. Mental time travel may also be critical to the evolution of language, which enables us to communicate about the non-present, sharing memories, plans, and ideas. Mental time travel is indexed in humans by hippocampal activity, and studies also suggest that the hippocampus in rats is active when the animals replay or pre play activity in a spatial environment, such as a maze. Mental time travel may have ancient origins, contrary to the view that it is unique to humans. Since mental time travel is also thought to underlie language, these findings suggest that language evolved gradually from pre-existing cognitive capacities, contrary to the view of Chomsky and others that language and symbolic thought emerged abruptly, in a single step, within the past 100,000 years. PMID:23908641

Wandering Tales: Evolutionary origins of mental time travel and language

Directory of Open Access Journals (Sweden)

Michael Charles Corballis

2013-07-01

Full Text Available A central component of mind wandering is mental time travel, the calling to mind of remembered past events and of imagined future ones. Mental time travel may also be critical to the evolution of language, which enables us to communicate about the nonpresent, sharing memories, plans, and ideas. Mental time travel is indexed in humans by hippocampal activity, and studies also suggest that the hippocampus in rats is active when the animals replay or pre play activity in a spatial environment, such as a maze. Mental time travel may have ancient origins, contrary to the view that it is unique to humans. Since mental time travel is also thought to underlie language, these findings suggest that language evolved gradually from pre-existing cognitive capacities, contrary to the view of Chomsky and others that language and symbolic thought emerged abruptly, in a single step, within the past 100,000 years.

An experimental investigation of transient heat transfer in surrounding rock mass of high geothermal roadway

Directory of Open Access Journals (Sweden)

Zhang Yuan

2016-01-01

Full Text Available A self-designed experimental installation for transient heat transfer in the modelling surrounding rock mass of high geothermal roadways was elaborated in this paper. By utilizing the new installation, the temperature variation rules in surrounding rock mass of the high geothermal roadway during mechanical ventilation were studied. The results show that the roadway wall temperature decreases dramatically at the early stage of ventilation, and the temperature at every position of the surrounding rock mass is decreasing constantly with time passing by. From roadway wall to deep area, the temperature gradually increases until reaching original rock temperature. The relationship between dimensionless temperature and dimensionless radius demonstrates approximately exponential function. Meanwhile, the temperature disturbance range in the simulated surrounding rock mass extends gradually from the roadway wall to deep area in the surrounding rock mass. Besides, as the air velocity increases, heat loss in the surrounding rock mass rises and the ratio of temperature reduction becomes larger, the speed of disturbance range expansion also gets faster.

Effectiveness of different approaches to disseminating traveler information on travel time reliability.

Science.gov (United States)

2014-01-01

The second Strategic Highway Research Program (SHRP 2) Reliability program aims to improve trip time reliability by reducing the frequency and effects of events that cause travel times to fluctuate unpredictably. Congestion caused by unreliable, or n...

Faster than light motion does not imply time travel

International Nuclear Information System (INIS)

Andréka, Hajnal; Madarász, Judit X; Németi, István; Székely, Gergely; Stannett, Mike

2014-01-01

Seeing the many examples in the literature of causality violations based on faster than light (FTL) signals one naturally thinks that FTL motion leads inevitably to the possibility of time travel. We show that this logical inference is invalid by demonstrating a model, based on (3+1)-dimensional Minkowski spacetime, in which FTL motion is permitted (in every direction without any limitation on speed) yet which does not admit time travel. Moreover, the Principle of Relativity is true in this model in the sense that all observers are equivalent. In short, FTL motion does not imply time travel after all. (paper)

Implementation and testing of the travel time prediction system (TIPS)

OpenAIRE

PANT, Prahlad D; UNIVERSITY OF CINCINNATI

2001-01-01

RAPPORT DE RECHERCHE FINAL The Travel Time Prediction System (TIPS) is a portable automated system for predicting and displaying travel time for motorists in advance of and through freeway construction work zones,on a real-time basis

Similarity-Based Prediction of Travel Times for Vehicles Traveling on Known Routes

DEFF Research Database (Denmark)

Tiesyte, Dalia; Jensen, Christian Søndergaard

2008-01-01

, historical data in combination with real-time data may be used to predict the future travel times of vehicles more accurately, thus improving the experience of the users who rely on such information. We propose a Nearest-Neighbor Trajectory (NNT) technique that identifies the historical trajectory......The use of centralized, real-time position tracking is proliferating in the areas of logistics and public transportation. Real-time positions can be used to provide up-to-date information to a variety of users, and they can also be accumulated for uses in subsequent data analyses. In particular...... of vehicles that travel along known routes. In empirical studies with real data from buses, we evaluate how well the proposed distance functions are capable of predicting future vehicle movements. Second, we propose a main-memory index structure that enables incremental similarity search and that is capable...

Uncertain travel times and activity schedules under conditions of space-time constraints and invariant choice heuristics

NARCIS (Netherlands)

Rasouli, S.; Timmermans, H.J.P.

2014-01-01

The aim of this paper is to assess the impact of uncertain travel times as reflected in travel time variability on the outcomes of individuals’ activity–travel scheduling decisions, assuming they are faced with fixed space–time constraints and apply the set of decision rules that they have developed

Evaluation of a real-time travel time prediction system in a freeway construction work zone : executive summary.

Science.gov (United States)

2001-03-01

A real-time travel time prediction system (TIPS) was evaluated in a construction work : zone. TIPS includes changeable message signs (CMSs) displaying the travel time and : distance to the end of the work zone to motorists. The travel times displayed...

Back or to the future? Preferences of time travelers

Directory of Open Access Journals (Sweden)

Ralph Hertwig

2012-07-01

Full Text Available Popular culture reflects whatever piques our imagination. Think of the myriad movies and books that take viewers and readers on an imaginary journey to the past or the future (e.g., Gladiator, The Time Machine. Despite the ubiquity of time travel as a theme in cultural expression, the factors that underlie people's preferences concerning the direction of time travel have gone unexplored. What determines whether a person would prefer to visit the (certain past or explore the (uncertain future? We identified three factors that markedly affect people's preference for (hypothetical travel to the past or the future, respectively. Those who think of themselves as courageous, those with a more conservative worldview, and---perhaps counterintuitively---those who are advanced in age prefer to travel into the future. We discuss implications of these initial results.

Reliability of Bluetooth Technology for Travel Time Estimation

DEFF Research Database (Denmark)

Araghi, Bahar Namaki; Olesen, Jonas Hammershøj; Krishnan, Rajesh

2015-01-01

. However, their corresponding impacts on accuracy and reliability of estimated travel time have not been evaluated. In this study, a controlled field experiment is conducted to collect both Bluetooth and GPS data for 1000 trips to be used as the basis for evaluation. Data obtained by GPS logger is used...... to calculate actual travel time, referred to as ground truth, and to geo-code the Bluetooth detection events. In this setting, reliability is defined as the percentage of devices captured per trip during the experiment. It is found that, on average, Bluetooth-enabled devices will be detected 80% of the time......-range antennae detect Bluetooth-enabled devices in a closer location to the sensor, thus providing a more accurate travel time estimate. However, the smaller the size of the detection zone, the lower the penetration rate, which could itself influence the accuracy of estimates. Therefore, there has to be a trade...

NOTE ON TRAVEL TIME SHIFTS DUE TO AMPLITUDE MODULATION IN TIME-DISTANCE HELIOSEISMOLOGY MEASUREMENTS

International Nuclear Information System (INIS)

Nigam, R.; Kosovichev, A. G.

2010-01-01

Correct interpretation of acoustic travel times measured by time-distance helioseismology is essential to get an accurate understanding of the solar properties that are inferred from them. It has long been observed that sunspots suppress p-mode amplitude, but its implications on travel times have not been fully investigated so far. It has been found in test measurements using a 'masking' procedure, in which the solar Doppler signal in a localized quiet region of the Sun is artificially suppressed by a spatial function, and using numerical simulations that the amplitude modulations in combination with the phase-speed filtering may cause systematic shifts of acoustic travel times. To understand the properties of this procedure, we derive an analytical expression for the cross-covariance of a signal that has been modulated locally by a spatial function that has azimuthal symmetry and then filtered by a phase-speed filter typically used in time-distance helioseismology. Comparing this expression to the Gabor wavelet fitting formula without this effect, we find that there is a shift in the travel times that is introduced by the amplitude modulation. The analytical model presented in this paper can be useful also for interpretation of travel time measurements for the non-uniform distribution of oscillation amplitude due to observational effects.

Breast cancer stage at diagnosis: is travel time important?

Science.gov (United States)

Henry, Kevin A; Boscoe, Francis P; Johnson, Christopher J; Goldberg, Daniel W; Sherman, Recinda; Cockburn, Myles

2011-12-01

Recent studies have produced inconsistent results in their examination of the potential association between proximity to healthcare or mammography facilities and breast cancer stage at diagnosis. Using a multistate dataset, we re-examine this issue by investigating whether travel time to a patient's diagnosing facility or nearest mammography facility impacts breast cancer stage at diagnosis. We studied 161,619 women 40 years and older diagnosed with invasive breast cancer from ten state population based cancer registries in the United States. For each woman, we calculated travel time to their diagnosing facility and nearest mammography facility. Logistic multilevel models of late versus early stage were fitted, and odds ratios were calculated for travel times, controlling for age, race/ethnicity, census tract poverty, rural/urban residence, health insurance, and state random effects. Seventy-six percent of women in the study lived less than 20 min from their diagnosing facility, and 93 percent lived less than 20 min from the nearest mammography facility. Late stage at diagnosis was not associated with increasing travel time to diagnosing facility or nearest mammography facility. Diagnosis age under 50, Hispanic and Non-Hispanic Black race/ethnicity, high census tract poverty, and no health insurance were all significantly associated with late stage at diagnosis. Travel time to diagnosing facility or nearest mammography facility was not a determinant of late stage of breast cancer at diagnosis, and better geographic proximity did not assure more favorable stage distributions. Other factors beyond geographic proximity that can affect access should be evaluated more closely, including facility capacity, insurance acceptance, public transportation, and travel costs.

49 CFR 236.527 - Roadway element insulation resistance.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Roadway element insulation resistance. 236.527 Section 236.527 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD... element insulation resistance. Insulation resistance between roadway inductor and ground shall be...

The cost of travel time variability: three measures with properties

DEFF Research Database (Denmark)

Engelson, Leonid; Fosgerau, Mogens

2016-01-01

This paper explores the relationships between three types of measures of the cost of travel time variability: measures based on scheduling preferences and implicit departure time choice, Bernoulli type measures based on a univariate function of travel time, and mean-dispersion measures. We...

Issues in the valuation of travel time savings

DEFF Research Database (Denmark)

Gissel, Stine

1998-01-01

The subject of the paper is the valuation of travel time savings (emanating from investment in transport infrastructure). In the first part of the paper the question is approached within a microeconomic framework. It is discussed if and how the theory can give indications on the relative value...... of travel time elements and on the extrapolation of time values into the future. In the second part of the paper the same questions are investigated on the basis of the results of several empirical studies....

Bayesian Travel Time Inversion adopting Gaussian Process Regression

Science.gov (United States)

Mauerberger, S.; Holschneider, M.

2017-12-01

A major application in seismology is the determination of seismic velocity models. Travel time measurements are putting an integral constraint on the velocity between source and receiver. We provide insight into travel time inversion from a correlation-based Bayesian point of view. Therefore, the concept of Gaussian process regression is adopted to estimate a velocity model. The non-linear travel time integral is approximated by a 1st order Taylor expansion. A heuristic covariance describes correlations amongst observations and a priori model. That approach enables us to assess a proxy of the Bayesian posterior distribution at ordinary computational costs. No multi dimensional numeric integration nor excessive sampling is necessary. Instead of stacking the data, we suggest to progressively build the posterior distribution. Incorporating only a single evidence at a time accounts for the deficit of linearization. As a result, the most probable model is given by the posterior mean whereas uncertainties are described by the posterior covariance.As a proof of concept, a synthetic purely 1d model is addressed. Therefore a single source accompanied by multiple receivers is considered on top of a model comprising a discontinuity. We consider travel times of both phases - direct and reflected wave - corrupted by noise. Left and right of the interface are assumed independent where the squared exponential kernel serves as covariance.

Model-based Integration of Past & Future in TimeTravel

DEFF Research Database (Denmark)

Khalefa, Mohamed E.; Fischer, Ulrike; Pedersen, Torben Bach

2012-01-01

We demonstrate TimeTravel, an efficient DBMS system for seamless integrated querying of past and (forecasted) future values of time series, allowing the user to view past and future values as one joint time series. This functionality is important for advanced application domain like energy....... The main idea is to compactly represent time series as models. By using models, the TimeTravel system answers queries approximately on past and future data with error guarantees (absolute error and confidence) one order of magnitude faster than when accessing the time series directly. In addition...... it to answer approximate and exact queries. TimeTravel is implemented into PostgreSQL, thus achieving complete user transparency at the query level. In the demo, we show the easy building of a hierarchical model index for a real-world time series and the effect of varying the error guarantees on the speed up...

Analysis of soft rock mineral components and roadway failure mechanism

Institute of Scientific and Technical Information of China (English)

陈杰

2001-01-01

The mineral components and microstructure of soft rock sampled from roadway floor inXiagou pit are determined by X-ray diffraction and scanning electron microscope. Ccmbined withthe test of expansion and water softening property of the soft rock, the roadway failure mechanism is analyzed, and the reasonable repair supporting principle of roadway is put forward.

The Regularity and Irregularity of Travel: an Analysis of the Consistency of Travel Times Associated with Subsistence, Maintenance and Discretionary Activities

OpenAIRE

Longden, Thomas

2016-01-01

Regular and irregular travel patterns coincide with different underlying purposes of travel and days of the week. Within this paper, it is shown that the balance between subsistence (i.e. work) and discretionary (i.e. leisure) activities is related to differences in travel patterns and explains consistency across years. Using eight years of time use diary entries this paper finds that travel time related to subsistence activities tends to be regular and stable. In contrast, travel time associ...

Sustainable development of roadways in Africa

OpenAIRE

Akindeji-Oladeji, O.; Awomeso, J. A.; Taiwo, A. M.; Abu, S.

2012-01-01

Dallas Roadway Products (DRP) soil stabilization technology can effectively improve road foundation construction and with it the strength of roadway sub-grades and sub-bases. Soil samples were collected from roads in Nigeria’s six geo-political regions. DRP LS-40 (lignate sulfonate) and DRP SA-44 (sulfuric acid) were added to the soil materials. The mixture precipitated a non-reversible chemical reaction that involved a permanent change in the soil structure. The chemicals reacted with th...

Sustainable development of roadways in Africa

OpenAIRE

Akindeji-Oladeji, O.; Awomeso, J. A.; Taiwo, A. M.; Abu, S.

2012-01-01

Dallas Roadway Products (DRP) soil stabilization technology can effectively improve road foundation construction and with it the strength of roadway sub-grades and sub-bases. Soil samples were collected from roads in Nigeria’s six geo-political regions. DRP LS-40 (lignate sulfonate) and DRP SA-44 (sulfuric acid) were added to the soil materials. The mixture precipitated a non-reversible chemical reaction that involved a permanent change in the soil structure. The chemicals reacted with the cl...

41 CFR 301-52.14 - What must I do with any travel advance outstanding at the time I submit my travel claim?

Science.gov (United States)

2010-07-01

... travel advance outstanding at the time I submit my travel claim? 301-52.14 Section 301-52.14 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES... § 301-52.14 What must I do with any travel advance outstanding at the time I submit my travel claim? You...

Heterogeneous Data Fusion Method to Estimate Travel Time Distributions in Congested Road Networks

OpenAIRE

Chaoyang Shi; Bi Yu Chen; William H. K. Lam; Qingquan Li

2017-01-01

Travel times in congested urban road networks are highly stochastic. Provision of travel time distribution information, including both mean and variance, can be very useful for travelers to make reliable path choice decisions to ensure higher probability of on-time arrival. To this end, a heterogeneous data fusion method is proposed to estimate travel time distributions by fusing heterogeneous data from point and interval detectors. In the proposed method, link travel time distributions are f...

Preferences for travel time variability – A study of Danish car drivers

DEFF Research Database (Denmark)

Hjorth, Katrine; Rich, Jeppe

Travel time variability (TTV) is a measure of the extent of unpredictability in travel times. It is generally accepted that TTV has a negative effect on travellers’ wellbeing and overall utility of travelling, and valuation of variability is an important issue in transport demand modelling...... preferences, to exclude non-traders, and to avoid complicated issues related to scheduled public transport services. The survey uses customised Internet questionnaires, containing a series of questions related to the traveller’s most recent morning trip to work, e.g.: • Travel time experienced on this day......, • Number of stops along the way, their duration, and whether these stops involved restrictions on time of day, • Restrictions regarding departure time from home or arrival time at work, • How often such a trip was made within the last month and the range of experienced travel times, • What the traveller...

Dynamic Bus Travel Time Prediction Models on Road with Multiple Bus Routes.

Science.gov (United States)

Bai, Cong; Peng, Zhong-Ren; Lu, Qing-Chang; Sun, Jian

2015-01-01

Accurate and real-time travel time information for buses can help passengers better plan their trips and minimize waiting times. A dynamic travel time prediction model for buses addressing the cases on road with multiple bus routes is proposed in this paper, based on support vector machines (SVMs) and Kalman filtering-based algorithm. In the proposed model, the well-trained SVM model predicts the baseline bus travel times from the historical bus trip data; the Kalman filtering-based dynamic algorithm can adjust bus travel times with the latest bus operation information and the estimated baseline travel times. The performance of the proposed dynamic model is validated with the real-world data on road with multiple bus routes in Shenzhen, China. The results show that the proposed dynamic model is feasible and applicable for bus travel time prediction and has the best prediction performance among all the five models proposed in the study in terms of prediction accuracy on road with multiple bus routes.

Dynamic Bus Travel Time Prediction Models on Road with Multiple Bus Routes

Science.gov (United States)

Bai, Cong; Peng, Zhong-Ren; Lu, Qing-Chang; Sun, Jian

2015-01-01

Accurate and real-time travel time information for buses can help passengers better plan their trips and minimize waiting times. A dynamic travel time prediction model for buses addressing the cases on road with multiple bus routes is proposed in this paper, based on support vector machines (SVMs) and Kalman filtering-based algorithm. In the proposed model, the well-trained SVM model predicts the baseline bus travel times from the historical bus trip data; the Kalman filtering-based dynamic algorithm can adjust bus travel times with the latest bus operation information and the estimated baseline travel times. The performance of the proposed dynamic model is validated with the real-world data on road with multiple bus routes in Shenzhen, China. The results show that the proposed dynamic model is feasible and applicable for bus travel time prediction and has the best prediction performance among all the five models proposed in the study in terms of prediction accuracy on road with multiple bus routes. PMID:26294903

Wireless data collection system for travel time estimation and traffic performance evaluation.

Science.gov (United States)

2010-09-01

Having accurate and continually updated travel time and other performance data for the road and highway system has many benefits. From the perspective of the road users, having real-time updates on travel times will permit better travel and route pla...

Freeway travel-time estimation and forecasting.

Science.gov (United States)

2012-09-01

This project presents a microsimulation-based framework for generating short-term forecasts of travel time on freeway corridors. The microsimulation model that is developed (GTsim), replicates freeway capacity drop and relaxation phenomena critical f...

Proximity of US schools to major roadways: a nationwide assessment.

Science.gov (United States)

Kingsley, Samantha L; Eliot, Melissa N; Carlson, Lynn; Finn, Jennifer; MacIntosh, David L; Suh, Helen H; Wellenius, Gregory A

2014-01-01

Long-term exposure to traffic pollution has been associated with adverse health outcomes in children and adolescents. A significant number of schools may be located near major roadways, potentially exposing millions of children to high levels of traffic pollution, but this hypothesis has not been evaluated nationally. We obtained data on the location and characteristics of 114,644 US public and private schools, grades prekindergarten through 12, and calculated their distance to the nearest major roadway. In 2005-2006, 3.2 million students (6.2%) attended 8,424 schools (7.3%) located within 100 m of a major roadway, and an additional 3.2 million (6.3%) students attended 8,555 (7.5%) schools located 100-250 m from a major roadway. Schools serving predominantly Black students were 18% (95% CI, 13-23%) more likely to be located within 250 m of a major roadway. Public schools eligible for Title I programs and those with a majority of students eligible for free/reduced price meals were also more likely to be near major roadways. In conclusion, 6.4 million US children attended schools within 250 m of a major roadway and were likely exposed to high levels of traffic pollution. Minority and underprivileged children were disproportionately affected, although some results varied regionally.

Using prospect theory to investigate the low value of travel time for small time changes

DEFF Research Database (Denmark)

Hjorth, Katrine; Fosgerau, Mogens

A common finding in stated preference studies that measure the value of travel time (VTT), is that the measured per-minute VTT increases with the size of the time change considered, in conflict with standard neoclassical theory. The current paper tests prospect theory as a possible explanation......: More specifically, whether the phenomenon is generated by preferences being reference-dependent and exhibiting diminishing sensitivity for gains and losses, with a stronger degree of diminishing sensitivity for money than for travel time. We use stated preference data with trade-offs between travel...... time and money that pro- vide identification of the degrees of diminishing sensitivity for time and money gains and losses, thus enabling us to test and potentially falsify the prospect theory explanation. We apply a discrete choice model, in which choice depends on a reference-free value of travel...

Investigating Unsaturated Zone Travel Times with Tritium and Stable Isotopes

Science.gov (United States)

Visser, A.; Thaw, M.; Van der Velde, Y.

2017-12-01

Travel times in the unsaturated zone are notoriously difficult to assess. Travel time tracers relying on the conservative transport of dissolved (noble) gases (tritium-helium, CFCs or SF6) are not applicable. Large water volume requirements of other cosmogenic radioactive isotopes (sulfur-35, sodium-22) preclude application in the unsaturated zone. Prior investigations have relied on models, introduced tracers, profiles of stable isotopes or tritium, or a combination of these techniques. Significant unsaturated zone travel times (UZTT) complicate the interpretation of stream water travel time tracers by ranked StorAge Selection (rSAS) functions. Close examination of rSAS functions in a sloping soil lysimeter[1] show the effect of the UZTT on the shape of the rSAS cumulative distribution function. We studied the UZTT at the Southern Sierra Critical Zone Observatory (SS-CZO) using profiles of tritium and stable isotopes (18O and 2H) in the unsaturated zone, supported by soil water content data. Tritium analyses require 100-500 mL of soil water and therefore large soil samples (1-5L), and elaborate laboratory procedures (oven drying, degassing and noble gas mass spectrometry). The high seasonal and interannual variability in precipitation of the Mediterranean climate, variable snow pack and high annual ET/P ratios lead to a dynamic hydrology in the deep unsaturated soils and regolith and highly variable travel time distributions. Variability of the tritium concentration in precipitation further complicates direct age estimates. Observed tritium profiles (>3 m deep) are interpreted in terms of advective and dispersive vertical transport of the input variability and radioactive decay of tritium. Significant unsaturated zone travel times corroborate previously observed low activities of short-lived cosmogenic radioactive nuclides in stream water. Under these conditions, incorporating the UZTT is critical to adequately reconstruct stream water travel time distributions. 1

Numerical simulation of roadway support in a sandstone-type uranium mine

International Nuclear Information System (INIS)

Liu Huipeng; Li Yu; Song Lixia

2009-01-01

At present, the most surrounding rocks of sandstone-type uranium mines in China are mudstone, sandstone, pelitic siltstone, and so on. They show the characteristics of soft rock. Such uranium deposit is not fit for in-situ leaching. If the uranium ores are mined by conventional mining method, one of the problems to be solved is the support technique in the soft rock roadway. So, taking a uranium mine in Inner Mongolia as the research object, the support technique in the soft rock roadway of the sandstone-type uranium deposits is studied. Through on-site engineering geological investigation and laboratory test, the main reasons for roadway damage are analyzed. A technique of support in the soft rock roadway of sandstone-type uranium deposits is put forward by drawing on the expericnce of soft rock roadway support in coal mines. The roadway shape and support parameters are optimized by using a numerical simulation method. The results verified the feasibility of the supporting technique. (authors)

SOME INSIGHTS ON ROADWAY INFRASTRUCTURE DESIGN FOR SAFE ELDERLY PEDESTRIAN TRAVEL

Directory of Open Access Journals (Sweden)

Venkataraman N. SHANKAR

2006-01-01

We obtained these results through the use of Bayesian analysis. Bayesian analysis allows us to use subjective prior information on the distribution of parameters in combination with information from the observed data. The advantage of Bayesian analysis in the assessment of key road variables on safe elderly travel is that we can examine the robustness of results.

A Dynamic Travel Time Estimation Model Based on Connected Vehicles

Directory of Open Access Journals (Sweden)

Daxin Tian

2015-01-01

Full Text Available With advances in connected vehicle technology, dynamic vehicle route guidance models gradually become indispensable equipment for drivers. Traditional route guidance models are designed to direct a vehicle along the shortest path from the origin to the destination without considering the dynamic traffic information. In this paper a dynamic travel time estimation model is presented which can collect and distribute traffic data based on the connected vehicles. To estimate the real-time travel time more accurately, a road link dynamic dividing algorithm is proposed. The efficiency of the model is confirmed by simulations, and the experiment results prove the effectiveness of the travel time estimation method.

Influence of cantilevered sheet pile deflection on adjacent roadways.

Science.gov (United States)

2009-06-01

Cantilevered sheet pile walls are often used adjacent roadways as temporary support during construction. Excess movement of these walls has led to excessive roadway distress causing additional repairs to be necessary. This study assessed the effects ...

Impact of connected vehicle guidance information on network-wide average travel time

Directory of Open Access Journals (Sweden)

Jiangfeng Wang

2016-12-01

Full Text Available With the emergence of connected vehicle technologies, the potential positive impact of connected vehicle guidance on mobility has become a research hotspot by data exchange among vehicles, infrastructure, and mobile devices. This study is focused on micro-modeling and quantitatively evaluating the impact of connected vehicle guidance on network-wide travel time by introducing various affecting factors. To evaluate the benefits of connected vehicle guidance, a simulation architecture based on one engine is proposed representing the connected vehicle–enabled virtual world, and connected vehicle route guidance scenario is established through the development of communication agent and intelligent transportation systems agents using connected vehicle application programming interface considering the communication properties, such as path loss and transmission power. The impact of connected vehicle guidance on network-wide travel time is analyzed by comparing with non-connected vehicle guidance in response to different market penetration rate, following rate, and congestion level. The simulation results explore that average network-wide travel time in connected vehicle guidance shows a significant reduction versus that in non–connected vehicle guidance. Average network-wide travel time in connected vehicle guidance have an increase of 42.23% comparing to that in non-connected vehicle guidance, and average travel time variability (represented by the coefficient of variance increases as the travel time increases. Other vital findings include that higher penetration rate and following rate generate bigger savings of average network-wide travel time. The savings of average network-wide travel time increase from 17% to 38% according to different congestion levels, and savings of average travel time in more serious congestion have a more obvious improvement for the same penetration rate or following rate.

Establishing monitoring programs for travel time reliability. [supporting datasets

Science.gov (United States)

2014-01-01

The objective of this project was to develop system designs for programs to monitor travel time reliability and to prepare a guidebook that practitioners and others can use to design, build, operate, and maintain such systems. Generally, such travel ...

Influence of queue propagation and dissipation on route travel times

DEFF Research Database (Denmark)

Raovic, Nevena

into account (Bliemer, 2008). Yperman (2007) indicates that there is a significant difference in queue-propagation and queue-dissipation between the LTM and DQM. This results in different route travel times, and can further affect route choice. In this paper, different approaches to represent queue propagation...... and dissipation through the CTM, LTM and DQM are studied. A simple network allows to show how these approaches influence route travel time. Furthermore, the possibility of changing the existing DQM is considered in order to more realistically represent queue propagation and dissipation, which would lead to more...... accurate route travel times....

Travel Time Estimation on Urban Street Segment

Directory of Open Access Journals (Sweden)

Jelena Kajalić

2018-02-01

Full Text Available Level of service (LOS is used as the main indicator of transport quality on urban roads and it is estimated based on the travel speed. The main objective of this study is to determine which of the existing models for travel speed calculation is most suitable for local conditions. The study uses actual data gathered in travel time survey on urban streets, recorded by applying second by second GPS data. The survey is limited to traffic flow in saturated conditions. The RMSE method (Root Mean Square Error is used for research results comparison with relevant models: Akcelik, HCM (Highway Capacity Manual, Singapore model and modified BPR (the Bureau of Public Roads function (Dowling - Skabardonis. The lowest deviation in local conditions for urban streets with standardized intersection distance (400-500 m is demonstrated by Akcelik model. However, for streets with lower signal density (<1 signal/km the correlation between speed and degree of saturation is best presented by HCM and Singapore model. According to test results, Akcelik model was adopted for travel speed estimation which can be the basis for determining the level of service in urban streets with standardized intersection distance and coordinated signal timing under local conditions.

GIS Based Application of Advanced Traveler Information System in India

Science.gov (United States)

Kumar, P.; Singh, V.

2012-02-01

Developed countries like USA, Canada, Japan, UK, Australia and Germany have adopted advanced traveler information technologies expeditiously in comparison to developing countries. But, unlike developed countries, developing countries face considerable financial and framework constraints. Moreover local traffic, roadway, signalization, demographic, topological and social conditions in developing countries are quite different from those in developed countries. In this paper, a comprehensive framework comprising of system architecture, development methodology and salient features of a developed Advanced Traveler Information System (ATIS) for metropolitan cities in developing countries has been discussed. Development of proposed system is based on integration of two well known information technologies viz. Geographic Information Systems (GIS) and World Wide Web (WWW). Combination of these technologies can be utilized to develop an integrated ATIS that targets different types of travelers like private vehicle owners, transit users and casual outside visitors.

Monitoring travel times in an urban network using video, GPS and Bluetooth

NARCIS (Netherlands)

Jie, L.; Van Zuylen, H.J.; Chunhua, L.; Shoufeng, L.

2011-01-01

The travel time is an important measure for the quality of traffic. This paper discusses a few methods to measure or estimate the travel time in urban road networks. First of all, it is important to know that urban travel times display a large variation, so that the measurement of a single (average)

Impact of Roadway Stormwater Runoff on Microbial Contamination in the Receiving Stream.

Science.gov (United States)

Wyckoff, Kristen N; Chen, Si; Steinman, Andrew J; He, Qiang

2017-09-01

Stormwater runoff from roadways has increasingly become a regulatory concern for water pollution control. Recent work has suggested roadway stormwater runoff as a potential source of microbial pollutants. The objective of this study was to determine the impact of roadway runoff on the microbiological quality of receiving streams. Microbiological quality of roadway stormwater runoff and the receiving stream was monitored during storm events with both cultivation-dependent fecal bacteria enumeration and cultivation-independent high-throughput sequencing techniques. Enumeration of total coliforms as a measure of fecal microbial pollution found consistently lower total coliform counts in roadway runoff than those in the stream water, suggesting that roadway runoff was not a major contributor of microbial pollutants to the receiving stream. Further characterization of the microbial community in the stormwater samples by 16S ribosomal RNA gene-based high-throughput amplicon sequencing revealed significant differences in the microbial composition of stormwater runoff from the roadways and the receiving stream. The differences in microbial composition between the roadway runoff and stream water demonstrate that roadway runoff did not appear to have a major influence on the stream in terms of microbiological quality. Thus, results from both fecal bacteria enumeration and high-throughput amplicon sequencing techniques were consistent that roadway stormwater runoff was not the primary contributor of microbial loading to the stream. Further studies of additional watersheds with distinct characteristics are needed to validate these findings. Understanding gained in this study could support the development of more effective strategies for stormwater management in sensitive watersheds. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Estimation of Bimodal Urban Link Travel Time Distribution and Its Applications in Traffic Analysis

Directory of Open Access Journals (Sweden)

Yuxiong Ji

2015-01-01

Full Text Available Vehicles travelling on urban streets are heavily influenced by traffic signal controls, pedestrian crossings, and conflicting traffic from cross streets, which would result in bimodal travel time distributions, with one mode corresponding to travels without delays and the other travels with delays. A hierarchical Bayesian bimodal travel time model is proposed to capture the interrupted nature of urban traffic flows. The travel time distributions obtained from the proposed model are then considered to analyze traffic operations and estimate travel time distribution in real time. The advantage of the proposed bimodal model is demonstrated using empirical data, and the results are encouraging.

Sustainable roadway lighting seminar.

Science.gov (United States)

2014-07-01

The objective of this project was to develop and conduct a half-day educational seminar on sustainable : roadway lighting at three locations within New York State: Rochester, New York City, and Albany. : Primary attendees were engineers from the New ...

Particle tracking for unsaturated-zone groundwater travel time analysis at Yucca Mountain

International Nuclear Information System (INIS)

Arnold, B.W.; Skinner, L.H.; Zieman, N.B.

1995-01-01

A particle tracking code developed to link numerical modeling of groundwater flow in the unsaturated zone to the analysis of groundwater travel times was used to produce preliminary estimates of the distribution of groundwater-travel time from a potential repository at Yucca Mountain, Nevada to the water table. Compliance with 10CFR960 requires the demonstration that pre-waste-emplacement groundwater travel time from the disturbed zone to the accessible environment is expected to exceed 1,000 years along any path of likely and significant radionuclide travel. The use of multiple particles and multiple realizations of the geology and parameter distributions in the unsaturated zone allows a probabilistic analysis of groundwater travel times that may be applied for evaluating compliance

Oak woodland conservation as mitigation for roadway improvement

Science.gov (United States)

Park Steiner; Jackson Ford

2015-01-01

East Side Potter Valley (ESPV) Road is a heavily used rural collector road running north/south through the unincorporated area of Mendocino County known as Potter Valley. The roadway is significantly deteriorated and in need of repair and upgrade. The Mendocino County Department of Transportation (MCDOT) road project encompasses approximately 6.4 km of roadway that...

A Simplified Network Model for Travel Time Reliability Analysis in a Road Network

Directory of Open Access Journals (Sweden)

Kenetsu Uchida

2017-01-01

Full Text Available This paper proposes a simplified network model which analyzes travel time reliability in a road network. A risk-averse driver is assumed in the simplified model. The risk-averse driver chooses a path by taking into account both a path travel time variance and a mean path travel time. The uncertainty addressed in this model is that of traffic flows (i.e., stochastic demand flows. In the simplified network model, the path travel time variance is not calculated by considering all travel time covariance between two links in the network. The path travel time variance is calculated by considering all travel time covariance between two adjacent links in the network. Numerical experiments are carried out to illustrate the applicability and validity of the proposed model. The experiments introduce the path choice behavior of a risk-neutral driver and several types of risk-averse drivers. It is shown that the mean link flows calculated by introducing the risk-neutral driver differ as a whole from those calculated by introducing several types of risk-averse drivers. It is also shown that the mean link flows calculated by the simplified network model are almost the same as the flows calculated by using the exact path travel time variance.

77 FR 50323 - Railroad Workplace Safety; Roadway Worker Protection Miscellaneous Revisions (RRR)

Science.gov (United States)

2012-08-20

... Protections in Shop Areas B. Frequency of Training and Qualification for Additional Roadway Worker... job briefing requirement regarding the accessibility of the roadway worker in charge; the adoption of... roadway worker protection and blue signal protection requirements for work performed within shop areas...

Evaluation of a real-time travel time prediction system in a freeway construction work zone : final report, March 2001.

Science.gov (United States)

2001-03-01

A real-time travel time prediction system (TIPS) was evaluated in a construction work zone. TIPS includes changeable message signs (CMSs) displaying the travel time and distance to the end of the work zone to motorists. The travel times displayed by ...

Modelling the Small Throw Fault Effect on the Stability of a Mining Roadway and Its Verification by In Situ Investigation

Directory of Open Access Journals (Sweden)

Małkowski Piotr

2017-12-01

Full Text Available The small throw fault zones cause serious problems for mining engineers. The knowledge about the range of fractured zone around the roadway and about roadway’s contour deformations helps a lot with the right support design or its reinforcement. The paper presents the results of numerical analysis of the effect of a small throw fault zone on the convergence of the mining roadway and the extent of the fracturing induced around the roadway. The computations were performed on a dozen physical models featuring various parameters of rock mass and support for the purpose to select the settings that reflects most suitably the behavior of tectonically disturbed and undisturbed rocks around the roadway. Finally, the results of the calculations were verified by comparing them with in situ convergence measurements carried out in the maingate D-2 in the “Borynia-Zofiówka-Jastrzębie” coal mine. Based on the results of measurements it may be concluded that the rock mass displacements around a roadway section within a fault zone during a year were four times in average greater than in the section tectonically unaffected. The results of numerical calculations show that extent of the yielding zone in the roof reaches two times the throw of the fault, in the floor 3 times the throw, and horizontally approx. 1.5 to 1.8 times the width of modelled fault zone. Only a few elasto-plastic models or models with joints between the rock beds can be recommended for predicting the performance of a roadway which is within a fault zone. It is possible, using these models, to design the roadway support of sufficient load bearing capacity at the tectonically disturbed section.

Suburb-to-suburb intercity travel: Energy, time and dollar expenditures

Science.gov (United States)

Fels, M. F.

1976-01-01

The effect of adding suburb to terminal and terminal to suburb travel is examined. The energy consumed in entire trips was estimated. The total energy costs are compared with total travel times, and dollar costs to the traveler. Trips between origins in seven suburbs of Newark, New Jersey and destinations in two Washington, D. C. suburbs are analyzed.

49 CFR 236.1049 - Training specific to roadway workers.

Science.gov (United States)

2010-10-01

... who provide protection for themselves or roadway work groups. (b) Training subject areas. (1... control equipment in establishing protection for roadway workers and their equipment. (2) Instruction for... recognition of processor-based signal and train control equipment on the wayside and an understanding of how...

Extended Visual Glances Away from the Roadway are Associated with ADHD- and Texting-Related Driving Performance Deficits in Adolescents.

Science.gov (United States)

Kingery, Kathleen M; Narad, Megan; Garner, Annie A; Antonini, Tanya N; Tamm, Leanne; Epstein, Jeffery N

2015-08-01

The purpose of the research study was to determine whether ADHD- and texting-related driving impairments are mediated by extended visual glances away from the roadway. Sixty-one adolescents (ADHD =28, non-ADHD =33; 62% male; 11% minority) aged 16-17 with a valid driver's license were videotaped while engaging in a driving simulation that included a No Distraction, Hands-Free Phone Conversation, and Texting condition. Two indicators of visual inattention were coded: 1) percentage of time with eyes diverted from the roadway; and 2) number of extended (greater than 2 s) visual glances away from the roadway. Adolescents with ADHD displayed significantly more visual inattention to the roadway on both visual inattention measures. Increased lane position variability among adolescents with ADHD compared to those without ADHD during the Hands-Free Phone Conversation and Texting conditions was mediated by an increased number of extended glances away from the roadway. Similarly, texting resulted in decreased visual attention to the roadway. Finally, increased lane position variability during texting was also mediated by the number of extended glances away from the roadway. Both ADHD and texting impair visual attention to the roadway and the consequence of this visual inattention is increased lane position variability. Visual inattention is implicated as a possible mechanism for ADHD- and texting-related deficits and suggests that driving interventions designed to address ADHD- or texting-related deficits in adolescents need to focus on decreasing extended glances away from the roadway.

Methods for protecting mine roadways used by two faces

Energy Technology Data Exchange (ETDEWEB)

Katkov, G A; Dimanshtein, A S

1983-09-01

Use of a mine roadway by two longwall faces reduces mine drivage by half and positively influences ventilation and mine haulage. Economic effects of repeated use of mine roadways depend on strata control cost and repair of support systems damaged or deformed by rock strata stress. Use of strips of pneumatic stowing along mine roadways is uneconomical due to low support strength and significant subsidence of the waste rock strip under rock strata stress. Use of timber cribbings as well as blocks of reinforced concrete for strata control is uneconomical due to their high damage rate and low support capacity. Investigations carried out by the IGD Im. A.A. Skochinski Institute and other research institutes show that use of hardening stowing is superior to other methods for strata control in mine roadways used by two longwall faces. Hardening stowing (on a cement basis) is prepared by the SB-67 or the PBM-2Eh machines and by other systems used for guniting in coal mines. The optimum dimensions of a strip of hardening stowing depend on coal seam thickness and mechanical properties of the surrounding rock strata. Use of hardening stowing successfully controls roof subsidence in mine roadways and reduces support deformation. Examples of hardening stowing use in some Donbass coal mines are discussed.

Travel time data collection for measurement of advanced traveler information systems accuracy

Science.gov (United States)

2003-06-01

The objective of this white paper is to recommend an approach to measuring ATIS travel time accuracy so that ITS planners might have the data they need to make cost effective decisions regarding deployment of surveillance technologies to support ATIS...

[Travel time and distances to Norwegian out-of-hours casualty clinics].

Science.gov (United States)

Raknes, Guttorm; Morken, Tone; Hunskår, Steinar

2014-11-01

Geographical factors have an impact on the utilisation of out-of-hours services. In this study we have investigated the travel distance to out-of-hours casualty clinics in Norwegian municipalities in 2011 and the number of municipalities covered by the proposed recommendations for secondary on-call arrangements due to long distances. We estimated the average maximum travel times and distances in Norwegian municipalities using a postcode-based method. Separate analyses were performed for municipalities with a single, permanently located casualty clinic. Altogether 417 out of 430 municipalities were included. We present the median value of the maximum travel times and distances for the included municipalities. The median maximum average travel distance for the municipalities was 19 km. The median maximum average travel time was 22 minutes. In 40 of the municipalities (10 %) the median maximum average travel time exceeded 60 minutes, and in 97 municipalities (23 %) the median maximum average travel time exceeded 40 minutes. The population of these groups comprised 2 % and 5 % of the country's total population respectively. For municipalities with permanent emergency facilities(N = 316), the median average flight time 16 minutes and median average distance 13 km.. In many municipalities, the inhabitants have a long average journey to out-of-hours emergency health services, but seen as a whole, the inhabitants of these municipalities account for a very small proportion of the Norwegian population. The results indicate that the proposed recommendations for secondary on-call duty based on long distances apply to only a small number of inhabitants. The recommendations should therefore be adjusted and reformulated to become more relevant.

Visualizations of Travel Time Performance Based on Vehicle Reidentification Data

Energy Technology Data Exchange (ETDEWEB)

Young, Stanley Ernest [National Renewable Energy Lab, 15013 Denver West Parkway, Golden, CO 80401; Sharifi, Elham [Center for Advanced Transportation Technology, University of Maryland, College Park, Technology Ventures Building, Suite 2200, 5000 College Avenue, College Park, MD 20742; Day, Christopher M. [Joint Transportation Research Program, Purdue University, 550 Stadium Mall Drive, West Lafayette, IN 47906; Bullock, Darcy M. [Lyles School of Civil Engineering, Purdue University, 550 Stadium Mall Drive, West Lafayette, IN 47906

2017-01-01

This paper provides a visual reference of the breadth of arterial performance phenomena based on travel time measures obtained from reidentification technology that has proliferated in the past 5 years. These graphical performance measures are revealed through overlay charts and statistical distribution as revealed through cumulative frequency diagrams (CFDs). With overlays of vehicle travel times from multiple days, dominant traffic patterns over a 24-h period are reinforced and reveal the traffic behavior induced primarily by the operation of traffic control at signalized intersections. A cumulative distribution function in the statistical literature provides a method for comparing traffic patterns from various time frames or locations in a compact visual format that provides intuitive feedback on arterial performance. The CFD may be accumulated hourly, by peak periods, or by time periods specific to signal timing plans that are in effect. Combined, overlay charts and CFDs provide visual tools with which to assess the quality and consistency of traffic movement for various periods throughout the day efficiently, without sacrificing detail, which is a typical byproduct of numeric-based performance measures. These methods are particularly effective for comparing before-and-after median travel times, as well as changes in interquartile range, to assess travel time reliability.

Arterial link travel time estimation using loop detector data : phase 1

Science.gov (United States)

1997-11-01

The envisioned operational tests of Advanced Traveler Information Systems (ATIS) and Advanced Traffic Management Systems (ATMS) in the Minneapolis/St. Paul area call for the provision of timely and reliable travel times over an entire rod network. Un...

APPLICATION OF TRAVEL TIME RELIABILITY FOR PERFORMANCE ORIENTED OPERATIONAL PLANNING OF EXPRESSWAYS

Science.gov (United States)

Mehran, Babak; Nakamura, Hideki

Evaluation of impacts of congestion improvement scheme s on travel time reliability is very significant for road authorities since travel time reliability repr esents operational performance of expressway segments. In this paper, a methodology is presented to estimate travel tim e reliability prior to implementation of congestion relief schemes based on travel time variation modeling as a function of demand, capacity, weather conditions and road accident s. For subject expressway segmen ts, traffic conditions are modeled over a whole year considering demand and capacity as random variables. Patterns of demand and capacity are generated for each five minute interval by appl ying Monte-Carlo simulation technique, and accidents are randomly generated based on a model that links acci dent rate to traffic conditions. A whole year analysis is performed by comparing de mand and available capacity for each scenario and queue length is estimated through shockwave analysis for each time in terval. Travel times are estimated from refined speed-flow relationships developed for intercity expressways and buffer time index is estimated consequently as a measure of travel time reliability. For validation, estimated reliability indices are compared with measured values from empirical data, and it is shown that the proposed method is suitable for operational evaluation and planning purposes.

Freeway travel time estimation using existing fixed traffic sensors : phase 2.

Science.gov (United States)

2015-03-01

Travel time, one of the most important freeway performance metrics, can be easily estimated using the : data collected from fixed traffic sensors, avoiding the need to install additional travel time data collectors. : This project is aimed at fully u...

Dynamic Travel Time Prediction Models for Buses Using Only GPS Data

Directory of Open Access Journals (Sweden)

Wei Fan

2015-01-01

Full Text Available Providing real-time and accurate travel time information of transit vehicles can be very helpful as it assists passengers in planning their trips to minimize waiting times. The purpose of this research is to develop and compare dynamic travel time prediction models which can provide accurate prediction of bus travel time in order to give real-time information at a given downstream bus stop using only global positioning system (GPS data. Historical Average (HA, Kalman Filtering (KF and Artificial Neural Network (ANN models are considered and developed in this paper. A case has been studied by making use of the three models. Promising results are obtained from the case study, indicating that the models can be used to implement an Advanced Public Transport System. The implementation of this system could assist transit operators in improving the reliability of bus services, thus attracting more travelers to transit vehicles and helping relieve congestion. The performances of the three models were assessed and compared with each other under two criteria: overall prediction accuracy and robustness. It was shown that the ANN outperformed the other two models in both aspects. In conclusion, it is shown that bus travel time information can be reasonably provided using only arrival and departure time information at stops even in the absence of traffic-stream data.

Innovative methods for calculation of freeway travel time using limited data : executive summary report.

Science.gov (United States)

2008-08-01

ODOTs policy for Dynamic Message Sign : utilization requires travel time(s) to be displayed as : a default message. The current method of : calculating travel time involves a workstation : operator estimating the travel time based upon : observati...

A methodological framework of travel time distribution estimation for urban signalized arterial roads

NARCIS (Netherlands)

Zheng, Fangfang; van Zuylen, H.J.; Liu, Xiaobo

2017-01-01

Urban travel times are rather variable as a result of a lot of stochastic factors both in traffic flows, signals, and other conditions on the infrastructure. However, the most common way both in literature and practice is to estimate or predict only expected travel times, not travel time

PTRACK: A particle tracking program for evaluation travel path/travel time uncertainties

International Nuclear Information System (INIS)

Thompson, B.M.; Campbell, J.E.; Longsine, D.E.

1987-12-01

PTRACK is a model which tracks the path of a radionuclide particle released from a nuclear waste repository into a ground-water flow system in a two-dimensional representation of stratified geologic medium. The code calculates the time required for the particle to travel from the release point (the edge of the disturbed zone) to the specified horizontal or vertical boundary (the accessible environment). The physical properties of the geologic setting and the ground-water flow system can be treated as fixed values or as random variables sampled from their respective probability distributions. In the latter case, PTRACK assigns a sampled value for each parameter and tracks a particle for this trial (realization) of the system. Repeated realizations allow the effects of parameter uncertainty on travel paths/travel times to be quantified. The code can also calculate partial correlation coefficients between dependent variables and independent variables, which are useful in identifying important independent variables. This documentation describes the mathematical basis for the model, the algorithms and solution techniques used, and the computer code design. It also contains a detailed user's manual. The implementation of PTRACK is verified with several systems for which solutions have been calculated by hand. The integration of PTRACK with a Latin hypercube sampling (LHS) code is also discussed, although other sampling methods can be employed in place of LHS. 11 refs., 14 figs., 22 tabs

Polyurethane foam for roadway stabilization NH route 129, Loudon, NH.

Science.gov (United States)

2016-12-12

This report summarizes the evaluation of the performance of polyurethane foam as a method of roadway : stabilization for a rural roadway experiencing substantial frost heaving. : NHDOT is responsible for many roads which have evolved from gravel road...

Tile Drainage Density Reduces Groundwater Travel Times and Compromises Riparian Buffer Effectiveness.

Science.gov (United States)

Schilling, Keith E; Wolter, Calvin F; Isenhart, Thomas M; Schultz, Richard C

2015-11-01

Strategies to reduce nitrate-nitrogen (nitrate) pollution delivered to streams often seek to increase groundwater residence time to achieve measureable results, yet the effects of tile drainage on residence time have not been well documented. In this study, we used a geographic information system groundwater travel time model to quantify the effects of artificial subsurface drainage on groundwater travel times in the 7443-ha Bear Creek watershed in north-central Iowa. Our objectives were to evaluate how mean groundwater travel times changed with increasing drainage intensity and to assess how tile drainage density reduces groundwater contributions to riparian buffers. Results indicate that mean groundwater travel times are reduced with increasing degrees of tile drainage. Mean groundwater travel times decreased from 5.6 to 1.1 yr, with drainage densities ranging from 0.005 m (7.6 mi) to 0.04 m (62 mi), respectively. Model simulations indicate that mean travel times with tile drainage are more than 150 times faster than those that existed before settlement. With intensive drainage, less than 2% of the groundwater in the basin appears to flow through a perennial stream buffer, thereby reducing the effectiveness of this practice to reduce stream nitrate loads. Hence, strategies, such as reconnecting tile drainage to buffers, are promising because they increase groundwater residence times in tile-drained watersheds. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Extremal inversion of lunar travel time data. [seismic velocity structure

Science.gov (United States)

Burkhard, N.; Jackson, D. D.

1975-01-01

The tau method, developed by Bessonova et al. (1974), of inversion of travel times is applied to lunar P-wave travel time data to find limits on the velocity structure of the moon. Tau is the singular solution to the Clairaut equation. Models with low-velocity zones, with low-velocity zones at differing depths, and without low-velocity zones, were found to be consistent with data and within the determined limits. Models with and without a discontinuity at about 25-km depth have been found which agree with all travel time data to within two standard deviations. In other words, the existence of the discontinuity and its size and location have not been uniquely resolved. Models with low-velocity channels are also possible.

Numerical modeling for saturated-zone groundwater travel time analysis at Yucca Mountain

International Nuclear Information System (INIS)

Arnold, B.W.; Barr, G.E.

1996-01-01

A three-dimensional, site-scale numerical model of groundwater flow in the saturated zone at Yucca Mountain was constructed and linked to particle tracking simulations to produce an estimate of the distribution of groundwater travel times from the potential repository to the boundary of the accessible environment. This effort and associated modeling of groundwater travel times in the unsaturated zone were undertaken to aid in the evaluation of compliance of the site with 10CFR960. These regulations stipulate that pre-waste-emplacement groundwater travel time to the accessible environment shall exceed 1,000 years along any path of likely and significant radionuclide travel

49 CFR 214.513 - Retrofitting of existing on-track roadway maintenance machines; general.

Science.gov (United States)

2010-10-01

... maintenance machines; general. 214.513 Section 214.513 Transportation Other Regulations Relating to... SAFETY On-Track Roadway Maintenance Machines and Hi-Rail Vehicles § 214.513 Retrofitting of existing on-track roadway maintenance machines; general. (a) Each existing on-track roadway maintenance machine...

Travel Times for Screening Mammography: Impact of Geographic Expansion by a Large Academic Health System.

Science.gov (United States)

Rosenkrantz, Andrew B; Liang, Yu; Duszak, Richard; Recht, Michael P

2017-09-01

This study aims to assess the impact of off-campus facility expansion by a large academic health system on patient travel times for screening mammography. Screening mammograms performed from 2013 to 2015 and associated patient demographics were identified using the NYU Langone Medical Center Enterprise Data Warehouse. During this time, the system's number of mammography facilities increased from 6 to 19, reflecting expansion beyond Manhattan throughout the New York metropolitan region. Geocoding software was used to estimate driving times from patients' homes to imaging facilities. For 147,566 screening mammograms, the mean estimated patient travel time was 19.9 ± 15.2 minutes. With facility expansion, travel times declined significantly (P travel times between such subgroups. However, travel times to pre-expansion facilities remained stable (initial: 26.8 ± 18.9 minutes, final: 26.7 ± 18.6 minutes). Among women undergoing mammography before and after expansion, travel times were shorter for the postexpansion mammogram in only 6.3%, but this rate varied significantly (all P travel burden and reduce travel time variation among sociodemographic populations. Nonetheless, existing patients strongly tend to return to established facilities despite potentially shorter travel time locations, suggesting strong site loyalty. Variation in travel times likely relates to various factors other than facility proximity. Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

49 CFR 214.511 - Required audible warning devices for new on-track roadway maintenance machines.

Science.gov (United States)

2010-10-01

... roadway maintenance machines. 214.511 Section 214.511 Transportation Other Regulations Relating to... SAFETY On-Track Roadway Maintenance Machines and Hi-Rail Vehicles § 214.511 Required audible warning devices for new on-track roadway maintenance machines. Each new on-track roadway maintenance machine shall...

Online travel time estimation in urban areas using the occupancy of long loop detectors

NARCIS (Netherlands)

Mak, W.K.; Viti, F.; Hoogendoorn, S.P.; Hegyi, A.

2010-01-01

Roads in the Netherlands are often heavily congested. Real-time travel time information can be a valuable instrument to reduce the impact of increasing traffic demand on travel time with advantages for traffic participants as well as for the traffic network managers. For urban roads travel time

Validation and augmentation of Inrix arterial travel time data using independent sources : [research summary].

Science.gov (United States)

2015-02-01

Although the freeway travel time data has been validated extensively in recent : years, the quality of arterial travel time data is not well known. This project : presents a comprehensive validation scheme for arterial travel time data based : on GPS...

49 CFR 214.515 - Overhead covers for existing on-track roadway maintenance machines.

Science.gov (United States)

2010-10-01

... maintenance machines. 214.515 Section 214.515 Transportation Other Regulations Relating to Transportation... Roadway Maintenance Machines and Hi-Rail Vehicles § 214.515 Overhead covers for existing on-track roadway maintenance machines. (a) For those existing on-track roadway maintenance machines either currently or...

Complexity in the validation of ground-water travel time in fractured flow and transport systems

International Nuclear Information System (INIS)

Davies, P.B; Hunter, R.L.; Pickens, J.F.

1991-02-01

Ground-water travel time is a widely used concept in site assessment for radioactive waste disposal. While ground-water travel time was originally conceived to provide a simple performance measure for evaluating repository sites, its definition in many flow and transport environments is ambiguous. The US Department of Energy siting guidelines (10 CFR 960) define ground-water travel time as the time required for a unit volume of water to travel between two locations, calculated by dividing travel-path length by the quotient of average ground-water flux and effective porosity. Defining a meaningful effective porosity in a fractured porous material is a significant problem. Although the Waste Isolation Pilot Plant (WIPP) is not subject to specific requirements for ground-water travel time, travel times have been computed under a variety of model assumptions. Recently completed model analyses for WIPP illustrate the difficulties in applying a ground-water travel-time performance measure to flow and transport in fractured, fully saturated flow systems. 12 refs., 4 figs

Is average daily travel time expenditure constant? In search of explanations for an increase in average travel time.

NARCIS (Netherlands)

van Wee, B.; Rietveld, P.; Meurs, H.

2006-01-01

Recent research suggests that the average time spent travelling by the Dutch population has increased over the past decades. However, different data sources show different levels of increase. This paper explores possible causes for this increase. They include a rise in incomes, which has probably

Assessment and refinement of real-time travel time algorithms for use in practice : final report, October 2008.

Science.gov (United States)

2008-10-01

The FHWA has strongly encouraged transportation departments to display travel times on their Dynamic Message Signs (DMS). The Oregon : Department of Transportation (ODOT) currently displays travel time estimates on three DMSs in the Portland metropol...

49 CFR 214.519 - Floors, decks, stairs, and ladders of on-track roadway maintenance machines.

Science.gov (United States)

2010-10-01

... roadway maintenance machines. 214.519 Section 214.519 Transportation Other Regulations Relating to... SAFETY On-Track Roadway Maintenance Machines and Hi-Rail Vehicles § 214.519 Floors, decks, stairs, and ladders of on-track roadway maintenance machines. Floors, decks, stairs, and ladders of on-track roadway...

Establishing monitoring programs for travel time reliability.

Science.gov (United States)

2014-01-01

Within the second Strategic Highway Research Program (SHRP 2), Project L02 focused on creating a suite of methods by which transportation agencies could monitor and evaluate travel time reliability. Creation of the methods also produced an improved u...

Mental time travel and the shaping of language.

Science.gov (United States)

Corballis, Michael C

2009-01-01

Episodic memory can be regarded as part of a more general system, unique to humans, for mental time travel, and the construction of future episodes. This allows more detailed planning than is afforded by the more general mechanisms of instinct, learning, and semantic memory. To be useful, episodic memory need not provide a complete or even a faithful record of past events, and may even be part of a process whereby we construct fictional accounts. The properties of language are aptly designed for the communication and sharing of episodes, and for the telling of stories; these properties include symbolic representation of the elements of real-world events, time markers, and combinatorial rules. Language and mental time travel probably co-evolved during the Pleistocene, when brain size increased dramatically.

Bus Travel Time Deviation Analysis Using Automatic Vehicle Location Data and Structural Equation Modeling

Directory of Open Access Journals (Sweden)

Xiaolin Gong

2015-01-01

Full Text Available To investigate the influences of causes of unreliability and bus schedule recovery phenomenon on microscopic segment-level travel time variance, this study adopts Structural Equation Modeling (SEM to specify, estimate, and measure the theoretical proposed models. The SEM model establishes and verifies hypotheses for interrelationships among travel time deviations, departure delays, segment lengths, dwell times, and number of traffic signals and access connections. The finally accepted model demonstrates excellent fitness. Most of the hypotheses are supported by the sample dataset from bus Automatic Vehicle Location system. The SEM model confirms the bus schedule recovery phenomenon. The departure delays at bus terminals and upstream travel time deviations indeed have negative impacts on travel time fluctuation of buses en route. Meanwhile, the segment length directly and negatively impacts travel time variability and inversely positively contributes to the schedule recovery process; this exogenous variable also indirectly and positively influences travel times through the existence of signalized intersections and access connections. This study offers a rational approach to analyzing travel time deviation feature. The SEM model structure and estimation results facilitate the understanding of bus service performance characteristics and provide several implications for bus service planning, management, and operation.

Time travels in archaeology. Between Hollywood films and historical re-enactment?

Directory of Open Access Journals (Sweden)

Dawid Kobialka

2017-01-01

Full Text Available One of the recently most popular ways of experiencing the past is time travelling. It is ‘an experience and social practice in the present that evokes a past (or future reality’ (Holtorf 2009: 33. In this article, I mainly discuss the political aspect of time travelling. I focus on cinema as a medium which closely links archaeology with the time travel phenomenon. Two Oscars galas, of 2010 and 2012, are scrutinised as case studies. The text is a political intervention to start dreaming dangerously, to contribute as an archaeologist to the critique of the utopia of capitalism (see also Hernando 2005: 75.

Trip Travel Time Forecasting Based on Selective Forgetting Extreme Learning Machine

Directory of Open Access Journals (Sweden)

Zhiming Gui

2014-01-01

Full Text Available Travel time estimation on road networks is a valuable traffic metric. In this paper, we propose a machine learning based method for trip travel time estimation in road networks. The method uses the historical trip information extracted from taxis trace data as the training data. An optimized online sequential extreme machine, selective forgetting extreme learning machine, is adopted to make the prediction. Its selective forgetting learning ability enables the prediction algorithm to adapt to trip conditions changes well. Experimental results using real-life taxis trace data show that the forecasting model provides an effective and practical way for the travel time forecasting.

Real-time travel time prediction framework for departure time and route advice

NARCIS (Netherlands)

Calvert, S.C.; Snelder, M.; Bakri, T.; Heijligers, B.; Knoop, V.L.

2015-01-01

Heavily used urban networks remain a challenge for travel time prediction because traffic flow is rarely homogeneous and is also subject to a wide variety of disturbances. Various models, some of which use traffic flow theory and some of which are data driven, have been developed to predict traffic

Validation and augmentation of Inrix arterial travel time data using independent sources.

Science.gov (United States)

2015-02-01

Travel time data is a key input to Intelligent Transportation Systems (ITS) applications. Advancement in vehicle : tracking and identification technologies and proliferation of location-aware and connected devices has made network-wide travel time da...

Comparison of methods for measuring travel time at Florida freeways and arterials.

Science.gov (United States)

2014-07-01

Travel time is an important performance measure used to assess the traffic operational quality of various types of highway : facilities. Previous research funded by the Florida Department of Transportation (FDOT) on travel time reliability developed,...

Investigation of Bicycle Travel Time Estimation Using Bluetooth Sensors for Low Sampling Rates

Directory of Open Access Journals (Sweden)

Zhenyu Mei

2014-10-01

Full Text Available Filtering the data for bicycle travel time using Bluetooth sensors is crucial to the estimation of link travel times on a corridor. The current paper describes an adaptive filtering algorithm for estimating bicycle travel times using Bluetooth data, with consideration of low sampling rates. The data for bicycle travel time using Bluetooth sensors has two characteristics. First, the bicycle flow contains stable and unstable conditions. Second, the collected data have low sampling rates (less than 1%. To avoid erroneous inference, filters are introduced to “purify” multiple time series. The valid data are identified within a dynamically varying validity window with the use of a robust data-filtering procedure. The size of the validity window varies based on the number of preceding sampling intervals without a Bluetooth record. Applications of the proposed algorithm to the dataset from Genshan East Road and Moganshan Road in Hangzhou demonstrate its ability to track typical variations in bicycle travel time efficiently, while suppressing high frequency noise signals.

Racial disparities in travel time to radiotherapy facilities in the Atlanta metropolitan area.

Science.gov (United States)

Peipins, Lucy A; Graham, Shannon; Young, Randall; Lewis, Brian; Flanagan, Barry

2013-07-01

Low-income women with breast cancer who rely on public transportation may have difficulty in completing recommended radiation therapy due to inadequate access to radiation facilities. Using a geographic information system (GIS) and network analysis we quantified spatial accessibility to radiation treatment facilities in the Atlanta, Georgia metropolitan area. We built a transportation network model that included all bus and rail routes and stops, system transfers and walk and wait times experienced by public transportation system travelers. We also built a private transportation network to model travel times by automobile. We calculated travel times to radiation therapy facilities via public and private transportation from a population-weighted center of each census tract located within the study area. We broadly grouped the tracts by low, medium and high household access to a private vehicle and by race. Facility service areas were created using the network model to map the extent of areal coverage at specified travel times (30, 45 and 60 min) for both public and private modes of transportation. The median public transportation travel time to the nearest radiotherapy facility was 56 min vs. approximately 8 min by private vehicle. We found that majority black census tracts had longer public transportation travel times than white tracts across all categories of vehicle access and that 39% of women in the study area had longer than 1 h of public transportation travel time to the nearest facility. In addition, service area analyses identified locations where the travel time barriers are the greatest. Spatial inaccessibility, especially for women who must use public transportation, is one of the barriers they face in receiving optimal treatment. Published by Elsevier Ltd.

Design Of Overhead Roadway At Road Intersection

Directory of Open Access Journals (Sweden)

Raji

2017-08-01

Full Text Available This project deals with the Design of overhead-roadway located at CHALLENGE junction which is a T-junction. Analysis of the existing conditions was carried out to proffers solution to the cause of the problems occurring due to the vehicle competing for space at this intersection. Before carrying out the analysis a traffic surveys at peak hours for morning 0730 to 0830 am and afternoon 0300 to 0400 pm were conducted using 15 minutes interval. From the analysis it was found out that the peak hour factor and flow rate was 0.88 and 1656pcphpl respectively corresponding to LOS E. This implies that the capacity of the existing road is no longer able to accommodate the traffic flow hence overhead roadway was introduced to improve the efficiency of the intersection. The overhead-roadway is of 140 m length with 7 spans 20 m per span. It consists of a deck slab longitudinal girders cross girders deck beam pier foundation and retailing wall. All structural parts for this Flyover were designed using Staad professional software package and Manual method.

A simple method to assess unsaturated zone time lag in the travel time from ground surface to receptor.

Science.gov (United States)

Sousa, Marcelo R; Jones, Jon P; Frind, Emil O; Rudolph, David L

2013-01-01

In contaminant travel from ground surface to groundwater receptors, the time taken in travelling through the unsaturated zone is known as the unsaturated zone time lag. Depending on the situation, this time lag may or may not be significant within the context of the overall problem. A method is presented for assessing the importance of the unsaturated zone in the travel time from source to receptor in terms of estimates of both the absolute and the relative advective times. A choice of different techniques for both unsaturated and saturated travel time estimation is provided. This method may be useful for practitioners to decide whether to incorporate unsaturated processes in conceptual and numerical models and can also be used to roughly estimate the total travel time between points near ground surface and a groundwater receptor. This method was applied to a field site located in a glacial aquifer system in Ontario, Canada. Advective travel times were estimated using techniques with different levels of sophistication. The application of the proposed method indicates that the time lag in the unsaturated zone is significant at this field site and should be taken into account. For this case, sophisticated and simplified techniques lead to similar assessments when the same knowledge of the hydraulic conductivity field is assumed. When there is significant uncertainty regarding the hydraulic conductivity, simplified calculations did not lead to a conclusive decision. Copyright © 2012 Elsevier B.V. All rights reserved.

Complexity in the validation of ground-water travel time in fractured flow and transport systems

International Nuclear Information System (INIS)

Davies, P.B.; Hunter, R.L.; Pickens, J.F.

1991-01-01

Ground-water travel time is a widely used concept in site assessment for radioactive waste disposal. While ground-water travel time was originally conceived to provide a simple performance measure for evaluating repository sites, its definition in many flow and transport environments is ambiguous. The U.S. Department of Energy siting guidelines (10 CFR 960) define ground-water travel time as the time required for a unit volume of water to travel between two locations, calculated by dividing travel-path length by the quotient of average ground-water flux and effective porosity. Defining a meaningful effective porosity in a fractured porous material is a significant problem. Although the Waste Isolation Pilot Plant (WIPP) is not subject to specific requirements for ground-water travel time, travel times have been computed under a variety of model assumptions. Recently completed model analyses for WIPP illustrate the difficulties in applying a ground-water travel-time performance measure to flow and transport in fractured, fully saturated flow systems. Computer code used: SWIFT II (flow and transport code). 4 figs., 12 refs

Construction and installation of travel time signs on I-35 in Austin.

Science.gov (United States)

2016-08-01

Dynamic travel time signs (DTTS) provide current travel times to a specific destination via one or more : routes. These signs aid motorists in making route choice decisions en route. Through this project, three : DTTS were fabricated and installed on...

Uncertainty and sensitivity results for pre-waste-emplacement groundwater travel time

International Nuclear Information System (INIS)

Kaplan, P.G.

1992-01-01

In this paper uncertainty and sensitivity analyses for pre-waste-emplacement groundwater travel time conducted. Although preliminary, a numbed of interesting results were obtained. Uncertainty in the ground water travel time statistics, as measured by the coefficient of variation, increases and then decrease as the modeled system transitions from matrix-dominated to fracture-dominated flow. The uncertainty analysis also suggests that the median, as opposed to the mean, may be a better indicator of performance with respect to the regulatory criterion. The sensitivity analysis shows a strong correlation between an effective fracture property, fracture porosity, and failure to meet the regulatory pre-waste-emplacement groundwater travel time criterion of 1,000 years

Highway travel time information system based on cumulative count curves and new tracking technologies

Energy Technology Data Exchange (ETDEWEB)

Soriguera Marti, F.; Martinez-Diaz, M.; Perez Perez, I.

2016-07-01

Travel time is probably the most important indicator of the level of service of a highway, and it is also the most appreciated information for its users. Administrations and private companies make increasing efforts to improve its real time estimation. The appearance of new technologies makes the precise measurement of travel times easier than never before. However, direct measurements of travel time are, by nature, outdated in real time, and lack of the desired forecasting capabilities. This paper introduces a new methodology to improve the real time estimation of travel times by using the equipment usually present in most highways, i.e., loop detectors, in combination with Automatic Vehicle Identification or Tracking Technologies. One of the most important features of the method is the usage of cumulative counts at detectors as an input, avoiding the drawbacks of common spot-speed methodologies. Cumulative count curves have great potential for freeway travel time information systems, as they provide spatial measurements and thus allow the calculation of instantaneous travel times. In addition, they exhibit predictive capabilities. Nevertheless, they have not been used extensively mainly because of the error introduced by the accumulation of the detector drift. The proposed methodology solves this problem by correcting the deviations using direct travel time measurements. The method results highly beneficial for its accuracy as well as for its low implementation cost. (Author)

30 CFR 57.9313 - Roadway maintenance.

Science.gov (United States)

2010-07-01

... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Loading, Hauling, and Dumping Safety Devices, Provisions, and Procedures for Roadways, Railroads, and Loading and Dumping Sites...

Travelling Solitary Wave Solutions for Generalized Time-delayed Burgers-Fisher Equation

International Nuclear Information System (INIS)

Deng Xijun; Han Libo; Li Xi

2009-01-01

In this paper, travelling wave solutions for the generalized time-delayed Burgers-Fisher equation are studied. By using the first-integral method, which is based on the ring theory of commutative algebra, we obtain a class of travelling solitary wave solutions for the generalized time-delayed Burgers-Fisher equation. A minor error in the previous article is clarified. (general)

A travel mode comparison of commuters' exposures to air pollutants in Barcelona

Science.gov (United States)

de Nazelle, Audrey; Fruin, Scott; Westerdahl, Dane; Martinez, David; Ripoll, Anna; Kubesch, Nadine; Nieuwenhuijsen, Mark

2012-11-01

Daily commutes may contribute disproportionately to overall daily inhalations of urban air contaminants. Understanding factors that explain variability of exposures during travel, and especially differences across transportation modes, is essential to accurately assess health impacts of traffic emissions and to develop effective mitigating measures. We evaluated exposures and inhaled doses of air pollution and assessed factors that contributed to their variability in different travel modes in Barcelona. Black carbon (BC), ultrafine particles (UFP), carbon monoxide (CO), fine particle mass (PM2.5) and carbon dioxide (CO2) were measured and compared across walk, bike, bus, and car modes for a total of 172 trips made on two different round trip routes. On average, the car mode experienced highest concentrations for all contaminants. In pairwise t-tests between concurrent mode runs, statistically significant differences were found for cars compared to walking and biking. Car-to-walk or car-to-bike concentration ratios ranged from 1.3 for CO2 to 25 for CO and were 2-3 for PM2.5, BC, and UFP. In multivariate analyses, travel mode explained the greatest variability in travel exposures, from 8% for PM2.5 to 70% for CO. Different modal patterns emerged when estimating daily inhaled dose, with active commuters' two to three times greater total inhalation volume during travel producing about equal UFP and BC daily inhaled doses to car commuters and 33-50% higher UFP and BC doses compared to bus commuters. These findings, however, are specific to the bike and pedestrian lanes in this study being immediately adjacent to the roadways measured. Dedicated bike or pedestrian routes away from traffic would lead to lower active travel doses.

Deformation mechanisms in a coal mine roadway in extremely swelling soft rock.

Science.gov (United States)

Li, Qinghai; Shi, Weiping; Yang, Renshu

2016-01-01

The problem of roadway support in swelling soft rock was one of the challenging problems during mining. For most geological conditions, combinations of two or more supporting approaches could meet the requirements of most roadways; however, in extremely swelling soft rock, combined approaches even could not control large deformations. The purpose of this work was to probe the roadway deformation mechanisms in extremely swelling soft rock. Based on the main return air-way in a coal mine, deformation monitoring and geomechanical analysis were conducted, as well as plastic zone mechanical model was analysed. Results indicated that this soft rock was potentially very swelling. When the ground stress acted alone, the support strength needed in situ was not too large and combined supporting approaches could meet this requirement; however, when this potential released, the roadway would undergo permanent deformation. When the loose zone reached 3 m within surrounding rock, remote stress p ∞ and supporting stress P presented a linear relationship. Namely, the greater the swelling stress, the more difficult it would be in roadway supporting. So in this extremely swelling soft rock, a better way to control roadway deformation was to control the releasing of surrounding rock's swelling potential.

Probabilistic assessment of roadway departure risk in a curve

Science.gov (United States)

Rey, G.; Clair, D.; Fogli, M.; Bernardin, F.

2011-10-01

Roadway departure while cornering constitutes a major part of car accidents and casualties in France. Even though drastic policy about overspeeding contributes to reduce accidents, there obviously exist other factors. This article presents the construction of a probabilistic strategy for the roadway departure risk assessment. A specific vehicle dynamic model is developed in which some parameters are modelled by random variables. These parameters are deduced from a sensitivity analysis to ensure an efficient representation of the inherent uncertainties of the system. Then, structural reliability methods are employed to assess the roadway departure risk in function of the initial conditions measured at the entrance of the curve. This study is conducted within the French national road safety project SARI that aims to implement a warning systems alerting the driver in case of dangerous situation.

Simple Kinematic Pathway Approach (KPA) to Catchment-scale Travel Time and Water Age Distributions

Science.gov (United States)

Soltani, S. S.; Cvetkovic, V.; Destouni, G.

2017-12-01

The distribution of catchment-scale water travel times is strongly influenced by morphological dispersion and is partitioned between hillslope and larger, regional scales. We explore whether hillslope travel times are predictable using a simple semi-analytical "kinematic pathway approach" (KPA) that accounts for dispersion on two levels of morphological and macro-dispersion. The study gives new insights to shallow (hillslope) and deep (regional) groundwater travel times by comparing numerical simulations of travel time distributions, referred to as "dynamic model", with corresponding KPA computations for three different real catchment case studies in Sweden. KPA uses basic structural and hydrological data to compute transient water travel time (forward mode) and age (backward mode) distributions at the catchment outlet. Longitudinal and morphological dispersion components are reflected in KPA computations by assuming an effective Peclet number and topographically driven pathway length distributions, respectively. Numerical simulations of advective travel times are obtained by means of particle tracking using the fully-integrated flow model MIKE SHE. The comparison of computed cumulative distribution functions of travel times shows significant influence of morphological dispersion and groundwater recharge rate on the compatibility of the "kinematic pathway" and "dynamic" models. Zones of high recharge rate in "dynamic" models are associated with topographically driven groundwater flow paths to adjacent discharge zones, e.g. rivers and lakes, through relatively shallow pathway compartments. These zones exhibit more compatible behavior between "dynamic" and "kinematic pathway" models than the zones of low recharge rate. Interestingly, the travel time distributions of hillslope compartments remain almost unchanged with increasing recharge rates in the "dynamic" models. This robust "dynamic" model behavior suggests that flow path lengths and travel times in shallow

Iterative Bayesian Estimation of Travel Times on Urban Arterials: Fusing Loop Detector and Probe Vehicle Data.

Science.gov (United States)

Liu, Kai; Cui, Meng-Ying; Cao, Peng; Wang, Jiang-Bo

2016-01-01

On urban arterials, travel time estimation is challenging especially from various data sources. Typically, fusing loop detector data and probe vehicle data to estimate travel time is a troublesome issue while considering the data issue of uncertain, imprecise and even conflicting. In this paper, we propose an improved data fusing methodology for link travel time estimation. Link travel times are simultaneously pre-estimated using loop detector data and probe vehicle data, based on which Bayesian fusion is then applied to fuse the estimated travel times. Next, Iterative Bayesian estimation is proposed to improve Bayesian fusion by incorporating two strategies: 1) substitution strategy which replaces the lower accurate travel time estimation from one sensor with the current fused travel time; and 2) specially-designed conditions for convergence which restrict the estimated travel time in a reasonable range. The estimation results show that, the proposed method outperforms probe vehicle data based method, loop detector based method and single Bayesian fusion, and the mean absolute percentage error is reduced to 4.8%. Additionally, iterative Bayesian estimation performs better for lighter traffic flows when the variability of travel time is practically higher than other periods.

Evidence of Road Salt in New Hampshire’s Snowpack Hundreds of Meters from Roadways

Directory of Open Access Journals (Sweden)

James Lazarcik

2017-07-01

Full Text Available Salinization of surface and groundwater has been directly linked to the area of road surfaces in a watershed and the subsequent wintertime maintenance used to keep roads free of snow and ice. Most studies that explore road salt in snow along roadways limit the study to within 100 m from a roadway and conclude that there is negligible deposition of de-icing salt at distances greater than 100 m. In this study, we analyze the ion content of the southern New Hampshire snowpack and use Mg2+ as a conservative sea-salt tracer to calculate sea salt and non-sea salt fractions of Cl−. There is a minimum of 60% non-sea salt Cl−, which we attribute to road salt, in the snowpack at our study sites 115 to 350 m from the nearest maintained roadways. This suggests that larger areas need to be considered when investigating the negative impact of Cl− loading due to winter-time maintenance.

Commuting to work: RN travel time to employment in rural and urban areas.

Science.gov (United States)

Rosenberg, Marie-Claire; Corcoran, Sean P; Kovner, Christine; Brewer, Carol

2011-02-01

To investigate the variation in average daily travel time to work among registered nurses (RNs) living in urban, suburban, and rural areas. We examine how travel time varies across RN characteristics, job setting, and availability of local employment opportunities. Descriptive statistics and linear regression using a 5% sample from the 2000 Census and a longitudinal survey of newly licensed RNs (NLRN). Travel time for NLRN respondents was estimated using geographic information systems (GIS) software. In the NLRN, rural nurses and those living in small towns had significantly longer average commute times. Young married RNs and RNs with children also tended to have longer commute times, as did RNs employed by hospitals. The findings indicate that travel time to work varies significantly across locale types. Further research is needed to understand whether and to what extent lengthy commute times impact RN workforce needs in rural and urban areas.

A queueing framework for routing problems with time-dependent travel times

NARCIS (Netherlands)

Woensel, van T.; Kerbache, L.; Peremans, H.; Vandaele, N.J.

2007-01-01

Assigning and scheduling vehicle routes in a dynamic environment is a crucial management problem. Despite numerous publications dealing with efficient scheduling methods for vehicle routing, very few addressed the inherent stochastic and dynamic nature of travel times. In this paper, a vehicle

49 CFR 214.507 - Required safety equipment for new on-track roadway maintenance machines.

Science.gov (United States)

2010-10-01

... maintenance machines. 214.507 Section 214.507 Transportation Other Regulations Relating to Transportation... Roadway Maintenance Machines and Hi-Rail Vehicles § 214.507 Required safety equipment for new on-track roadway maintenance machines. (a) Each new on-track roadway maintenance machine shall be equipped with: (1...

A Micro-simulation model of updating expected travel time in provision of travel information : A bayesian belief approach implemented in a multi-state supernetwork

NARCIS (Netherlands)

Parvaneh, Z.; Liao, F.; Arentze, T.A.; Timmermans, H.J.P.; Shakshuki, Elhadi; Yasar, Ansar

2014-01-01

This study introduces a model of individual belief updating of subjective travel times as a function of the provision of different types of travel information. Travel information includes real-time prescriptive or descriptive, and public or personal information. The model is embedded in a

Improving The Accuracy Of Bluetooth Based Travel Time Estimation Using Low-Level Sensor Data

DEFF Research Database (Denmark)

Araghi, Bahar Namaki; Tørholm Christensen, Lars; Krishnan, Rajesh

2013-01-01

triggered by a single device. This could lead to location ambiguity and reduced accuracy of travel time estimation. Therefore, the accuracy of travel time estimations by Bluetooth Technology (BT) depends upon how location ambiguity is handled by the estimation method. The issue of multiple detection events...... in the context of travel time estimation by BT has been considered by various researchers. However, treatment of this issue has remained simplistic so far. Most previous studies simply used the first detection event (Enter-Enter) as the best estimate. No systematic analysis for exploring the most accurate method...... of estimating travel time using multiple detection events has been conducted. In this study different aspects of BT detection zone, including size and its impact on the accuracy of travel time estimation, are discussed. Moreover, four alternative methods are applied; namely, Enter-Enter, Leave-Leave, Peak...

Implementation and Comparison of Acoustic Travel-Time Measurement Procedures for the Helioseismic and Magnetic Imager Time-Distance Helioseismology Pipeline

Science.gov (United States)

Couvidat, S.; Zhao, J.; Birch, A. C.; Kosovichev, A. G.; Duvall, T. L., Jr.; Parchevsky, K.; Scherrer, P. H.

2009-01-01

The Helioseismic and Magnetic Imager (HMI) instrument on board the Solar Dynamics Observatory (SDO) satellite is designed to produce high-resolution Doppler velocity maps of oscillations at the solar surface with high temporal cadence. To take advantage of these high-quality oscillation data, a time-distance helioseismology pipeline has been implemented at the Joint Science Operations Center (JSOC) at Stanford University. The aim of this pipeline is to generate maps of acoustic travel times from oscillations on the solar surface, and to infer subsurface 3D flow velocities and sound-speed perturbations. The wave travel times are measured from cross covariances of the observed solar oscillation signals. For implementation into the pipeline we have investigated three different travel-time definitions developed in time-distance helioseismology: a Gabor wavelet fitting (Kosovichev and Duvall, 1997), a minimization relative to a reference cross-covariance function (Gizon and Birch, 2002), and a linearized version of the minimization method (Gizon and Birch, 2004). Using Doppler velocity data from the Michelson Doppler Imager (MDI) instrument on board SOHO, we tested and compared these definitions for the mean and difference travel-time perturbations measured from reciprocal signals. Although all three procedures return similar travel times in a quiet Sun region, the method of Gizon and Birch (2004) gives travel times that are significantly different from the others in a magnetic (active) region. Thus, for the pipeline implementation we chose the procedures of Kosovichev and Duvall (1997) and Gizon and Birch (2002). We investigated the relationships among these three travel-time definitions, their sensitivities to fitting parameters, and estimated the random errors they produce

Travel Cost Inference from Sparse, Spatio-Temporally Correlated Time Series Using Markov Models

DEFF Research Database (Denmark)

Yang, Bin; Guo, Chenjuan; Jensen, Christian S.

2013-01-01

of such time series offers insight into the underlying system and enables prediction of system behavior. While the techniques presented in the paper apply more generally, we consider the case of transportation systems and aim to predict travel cost from GPS tracking data from probe vehicles. Specifically, each...... road segment has an associated travel-cost time series, which is derived from GPS data. We use spatio-temporal hidden Markov models (STHMM) to model correlations among different traffic time series. We provide algorithms that are able to learn the parameters of an STHMM while contending...... with the sparsity, spatio-temporal correlation, and heterogeneity of the time series. Using the resulting STHMM, near future travel costs in the transportation network, e.g., travel time or greenhouse gas emissions, can be inferred, enabling a variety of routing services, e.g., eco-routing. Empirical studies...

Sustainable development of roadways in Africa

Directory of Open Access Journals (Sweden)

Akindeji-Oladeji, O.

2012-12-01

Full Text Available Dallas Roadway Products (DRP soil stabilization technology can effectively improve road foundation construction and with it the strength of roadway sub-grades and sub-bases. Soil samples were collected from roads in Nigeria’s six geo-political regions. DRP LS-40 (lignate sulfonate and DRP SA-44 (sulfuric acid were added to the soil materials. The mixture precipitated a non-reversible chemical reaction that involved a permanent change in the soil structure. The chemicals reacted with the clay content, increasing the soil material plasticity. In non-plastic soils, clay materials were added to the soil, which was then pulverised. The study showed that DRP soil stabilisation chemicals can render poor, unsuitable or marginally deficient soils apt for use as a sub-base or base in roadway construction.

La tecnología de Dallas Roadway Products (DRP constituye una metodología eficaz para mejorar la construcción de las capas inferiores del firme de calzadas y con ella la resistencia de las bases y sub-bases de las carreteras. En esta investigación se recogen muestras del terreno que constituye las carreteras existentes en las seis regiones geopolíticas nigerianas. Al incorporar a las muestras el DRP LS-40 (lignosulfonato y el DRP SA-44 (ácido sulfúrico, la mezcla acelera una reacción química no reversible que produce una modificación permanente del entramado del suelo. La reacción de las sustancias químicas con la arcilla del suelo aumenta su plasticidad. A los suelos sin plasticidad se agregan materiales arcillosos, procediéndose a continuación a la pulverización del material resultante. Según los resultados obtenidos, las sustancias químicas de estabilización de suelos de DRP pueden transformar los suelos pobres, inapropiados o deficientes en materiales adecuados para servir como bases o sub-bases de las carreteras.

Application of travel time information for traffic management.

Science.gov (United States)

2012-03-01

This report summarizes findings and implementations of probe vehicle data collection based on Bluetooth MAC address matching : technology. Probe vehicle travel time data are studied in the following field deployment case studies: analysis of traffic ...

Support technology of deep roadway under high stress and its application

Institute of Scientific and Technical Information of China (English)

Cao Rihong; Cao Ping; Lin Hang

2016-01-01

Roadway instability has been a major concern in the fields of mining engineering. This paper aims to provide practical and efficient strategy to support the roadways under high in-situ stress. A case study on the stability of deep roadways was carried out in an underground mine in Gansu province, China. Currently,the surrounding rock strata is extremely fractured, which results in a series of engineering disasters, such as side wall collapse and severe floor heave in the past decades. Aiming to solve these problems, an improved support method was proposed, which includes optimal bolt parameters and arrangement, floor beam layout by grooving, and full length grouting. Based on the modeling results by FLAC3D, the new support method is much better than the current one in terms of preventing the large deformation of surrounding rock and restricting the development of plastic zones. For implementation and verification, field experiments, along with deformation monitoring, were conducted in the 958 level roadway of Mining II areas. The results show that the improved support can significantly reduce surrounding rock deformation, avoid frequent repair, and maintain the long-term stability of the roadway. Compared to the original support, the new support method can greatly save investment of mines, and has good application value and popularization value.

A Quantitative Analysis of the Relationship Between Radiation Therapy Use and Travel Time.

Science.gov (United States)

Liu, Emma; Santibáñez, Pablo; Puterman, Martin L; Weber, Leah; Ma, Xiang; Sauré, Antoine; Olivotto, Ivo A; Halperin, Ross; French, John; Tyldesley, Scott

2015-11-01

To model and quantify the relationship between radiation therapy (RT) use and travel time to RT services. Population-based registries and databases were used to identify both incident cancer patient and patients receiving RT within 1 year of diagnosis (RT1y) in British Columbia, Canada, between 1992 and 2011. The effects of age, gender, diagnosis year, income, prevailing wait time, and travel duration for RT on RT1y were assessed. Significant factors from univariate analyses were included in a multivariable logistic regression model. The shape of the travel time-RT1y curve was represented by generalized additive and segmented regression models. Analyses were conducted for breast, lung, and genitourinary cancer separately and for all cancer sites combined. After adjustment for age, gender, diagnosis year, income, and prevailing wait times, increasing travel time to the closest RT facility had a negative impact RT1y. The shape of the travel time-RT1y curve varied with cancer type. For breast cancer, the odds of RT1y were constant for the first 2 driving hours and decreased at 17% per hour thereafter. For lung cancer, the odds of RT1y decreased by 16% after 20 minutes and then decreased at 6% per hour. Genitourinary cancer RT1y was relatively independent of travel time. For all cancer sites combined, the odds of RT1y were constant within the first 2 driving hours and decreased at 7% per hour thereafter. Travel time to receive RT has a different impact on RT1y for different tumor sites. The results provide evidence-based insights for the configuration of catchment areas for new and existing cancer centers providing RT. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Bluetooth-based travel time/speed measuring systems development.

Science.gov (United States)

2010-06-01

Agencies in the Houston region have traditionally used toll tag readers to provide travel times on : freeways and High Occupancy Vehicle (HOV) lanes, but these systems require large amounts of costly and : physically invasive infrastructure. Bluetoot...

Innovative methods for calculation of freeway travel time using limited data : final report.

Science.gov (United States)

2008-01-01

Description: Travel time estimations created by processing of simulated freeway loop detector data using proposed method have been compared with travel times reported from VISSIM model. An improved methodology was proposed to estimate freeway corrido...

Floating / Travelling Gardens of (Postcolonial Time

Directory of Open Access Journals (Sweden)

Carmen Concilio

2017-11-01

Full Text Available This essay on travelling gardens of (postcolonial time opens with two iconic images of floating gardens in contemporary postcolonial literature: Will Phantom’s bio-garbage rafter, which saves him in the midst of a cyclone in Carpentaria (2008, by the Aboriginal author Alexis Wright, and Pi’s carnivore island-organism in Life of Pi (2001, which cannot save him from his shipwreck, by Canadian writer Yan Martel. These floating, hybrid gardens of the Anthropocene precede the real travelling gardens of both Michael Ondaatje’s The Cat’s Table (2011 and Amitav Ghosh’s Ibis Trilogy (2008-2015, two authors who both indirectly and directly tell the story of botanical gardens in Asia, and of plant and seed smuggling and transplantation (“displacement” also hinting at their historical and economic colonial implications. For, after all, botanical gardens imply a very specific version of care, Cura (Robert Pogue Harrison 2009, while embodying a precise, imperial scientific and economic project (Brockway 2002; Johnson 2011.

Bi-criteria travelling salesman subtour problem with time threshold

Science.gov (United States)

Kumar Thenepalle, Jayanth; Singamsetty, Purusotham

2018-03-01

This paper deals with the bi-criteria travelling salesman subtour problem with time threshold (BTSSP-T), which comes from the family of the travelling salesman problem (TSP) and is NP-hard in the strong sense. The problem arises in several application domains, mainly in routing and scheduling contexts. Here, the model focuses on two criteria: total travel distance and gains attained. The BTSSP-T aims to determine a subtour that starts and ends at the same city and visits a subset of cities at a minimum travel distance with maximum gains, such that the time spent on the tour does not exceed the predefined time threshold. A zero-one integer-programming problem is adopted to formulate this model with all practical constraints, and it includes a finite set of feasible solutions (one for each tour). Two algorithms, namely, the Lexi-Search Algorithm (LSA) and the Tabu Search (TS) algorithm have been developed to solve the BTSSP-T problem. The proposed LSA implicitly enumerates the feasible patterns and provides an efficient solution with backtracking, whereas the TS, which is metaheuristic, will give the better approximate solution. A numerical example is demonstrated in order to understand the search mechanism of the LSA. Numerical experiments are carried out in the MATLAB environment, on the different benchmark instances available in the TSPLIB domain as well as on randomly generated test instances. The experimental results show that the proposed LSA works better than the TS algorithm in terms of solution quality and, computationally, both LSA and TS are competitive.

DeepTravel: a Neural Network Based Travel Time Estimation Model with Auxiliary Supervision

OpenAIRE

Zhang, Hanyuan; Wu, Hao; Sun, Weiwei; Zheng, Baihua

2018-01-01

Estimating the travel time of a path is of great importance to smart urban mobility. Existing approaches are either based on estimating the time cost of each road segment which are not able to capture many cross-segment complex factors, or designed heuristically in a non-learning-based way which fail to utilize the existing abundant temporal labels of the data, i.e., the time stamp of each trajectory point. In this paper, we leverage on new development of deep neural networks and propose a no...

Screen time and passive school travel as independent predictors of cardiorespiratory fitness in youth.

Science.gov (United States)

Sandercock, Gavin R H; Ogunleye, Ayodele A

2012-05-01

The most prevalent sedentary behaviours in children and adolescents are engagement with small screen media (screen-time) and passive travel (by motorised vehicle). The objective of this research was to assess the independence of these behaviours from one another and from physical activity as predictors of cardiorespiratory fitness in youth. We measured cardiorespiratory fitness in n=6819 10-16 year olds (53% male) who self-reported their physical activity (7-day recall) school travel and screen time habits. Travel was classified as active (walking, cycling) or passive; screen time as 4 h. The multivariate odds of being fit were higher in active travel (Boys: OR 1.32, 95% CI: 1.09-1.59; Girls: OR 1.46, 1.15-1.84) than in passive travel groups. Boys reporting low screen time were more likely to be fit than those reporting >4 h (OR 2.11, 95% CI: 1.68-2.63) as were girls (OR 1.66, 95% CI: 1.24-2.20). These odds remained significant after additionally controlling for physical activity. Passive travel and high screen time are independently associated with poor cardiorespiratory fitness in youth, and this relationship is independent of physical activity levels. A lifestyle involving high screen time and habitual passive school travel appears incompatible with healthful levels of cardiorespiratory fitness in youth. Copyright © 2012 Elsevier Inc. All rights reserved.

Measurement and evaluation of transit travel time reliability

Science.gov (United States)

2011-01-01

Transportation system customers need consistency in their daily travel times to enable them to plan their daily : activities, whether that is a commuter on their way to work, a company setting up delivery schedules for justintime : manufacturin...

Estimating Reaction Rate Coefficients Within a Travel-Time Modeling Framework

Energy Technology Data Exchange (ETDEWEB)

Gong, R [Georgia Institute of Technology; Lu, C [Georgia Institute of Technology; Luo, Jian [Georgia Institute of Technology; Wu, Wei-min [Stanford University; Cheng, H. [Stanford University; Criddle, Craig [Stanford University; Kitanidis, Peter K. [Stanford University; Gu, Baohua [ORNL; Watson, David B [ORNL; Jardine, Philip M [ORNL; Brooks, Scott C [ORNL

2011-03-01

A generalized, efficient, and practical approach based on the travel-time modeling framework is developed to estimate in situ reaction rate coefficients for groundwater remediation in heterogeneous aquifers. The required information for this approach can be obtained by conducting tracer tests with injection of a mixture of conservative and reactive tracers and measurements of both breakthrough curves (BTCs). The conservative BTC is used to infer the travel-time distribution from the injection point to the observation point. For advection-dominant reactive transport with well-mixed reactive species and a constant travel-time distribution, the reactive BTC is obtained by integrating the solutions to advective-reactive transport over the entire travel-time distribution, and then is used in optimization to determine the in situ reaction rate coefficients. By directly working on the conservative and reactive BTCs, this approach avoids costly aquifer characterization and improves the estimation for transport in heterogeneous aquifers which may not be sufficiently described by traditional mechanistic transport models with constant transport parameters. Simplified schemes are proposed for reactive transport with zero-, first-, nth-order, and Michaelis-Menten reactions. The proposed approach is validated by a reactive transport case in a two-dimensional synthetic heterogeneous aquifer and a field-scale bioremediation experiment conducted at Oak Ridge, Tennessee. The field application indicates that ethanol degradation for U(VI)-bioremediation is better approximated by zero-order reaction kinetics than first-order reaction kinetics.

49 CFR 214.355 - Training and qualification in on-track safety for operators of roadway maintenance machines.

Science.gov (United States)

2010-10-01

... operators of roadway maintenance machines. 214.355 Section 214.355 Transportation Other Regulations Relating... operators of roadway maintenance machines. (a) The training and qualification of roadway workers who operate roadway maintenance machines shall include, as a minimum: (1) Procedures to prevent a person from being...

HELIOSEISMIC SIGNATURE OF CHROMOSPHERIC DOWNFLOWS IN ACOUSTIC TRAVEL-TIME MEASUREMENTS FROM HINODE

International Nuclear Information System (INIS)

Nagashima, Kaori; Sekii, Takashi; Kosovichev, Alexander G.; Zhao Junwei; Tarbell, Theodore D.

2009-01-01

We report on a signature of chromospheric downflows in two emerging flux regions detected by time-distance helioseismology analysis. We use both chromospheric intensity oscillation data in the Ca II H line and photospheric Dopplergrams in the Fe I 557.6 nm line obtained by Hinode/SOT for our analyses. By cross-correlating the Ca II oscillation signals, we have detected a travel-time anomaly in the plage regions; outward travel times are shorter than inward travel times by 0.5-1 minute. However, such an anomaly is absent in the Fe I data. These results can be interpreted as evidence of downflows in the lower chromosphere. The downflow speed is estimated to be below 10 km s -1 . This result demonstrates a new possibility of studying chromospheric flows by time-distance analysis.

Assessing segment- and corridor-based travel-time reliability on urban freeways : final report.

Science.gov (United States)

2016-09-01

Travel time and its reliability are intuitive performance measures for freeway traffic operations. The objective of this project was to quantify segment-based and corridor-based travel time reliability measures on urban freeways. To achieve this obje...

DOTD support for UTC project : travel time estimation using bluetooth, [research project capsule].

Science.gov (United States)

2013-10-01

Travel time estimates are useful tools for measuring congestion in an urban area. Current : practice involves using probe vehicles or video cameras to measure travel time, but this is a laborintensive and expensive means of obtaining the information....

Modelling travel and residence times in the eastern Irish Sea

International Nuclear Information System (INIS)

Dabrowski, T.; Hartnett, M.

2008-01-01

The Irish Sea, which lies between 51 deg. N-56 deg. N and 2 deg. 50'W-7 deg. W, provides a sheltered environment to exploit valuable fisheries resource. Anthropogenic activity is a real threat to its water quality. The majority of freshwater input down rivers flows into the eastern Irish Sea. The structure of the water circulation was not well understood during the planning of Sellafield nuclear plant outfall site in the eastern Irish Sea. A three-dimensional primitive equation numerical model was applied to the Irish Sea to simulate both barotropic and baroclinic circulation within the region. High accuracy was achieved with regard to the prediction of both tidal circulation and surface and nearbed water temperatures across the region. The model properly represented the Western Irish Sea Gyre, induced by thermal stratification and not known during planning Sellafield. Passive tracer simulations based on the developed hydrodynamic model were used to deliver residence times of the eastern Irish Sea region for various times of the year as well as travel times from the Sellafield outfall site to various locations within the Irish Sea. The results indicate a strong seasonal variability of travel times from Sellafield to the examined locations. Travel time to the Clyde Sea is the shortest for the autumnal tracer release (90 days); it takes almost a year for the tracer to arrive at the same location if it is released in January. Travel times from Sellafield to Dublin Bay fall within the range of 180-360 days. The average residence time of the entire eastern Irish Sea is around 7 months. The areas surrounding the Isle of Man are initially flushed due to a predominant northward flow; a backwater is formed in Liverpool Bay. Thus, elevated tracer concentrations are predicted in Liverpool Bay in the case of accidental spills at the Sellafield outfall site

Placement Design of Changeable Message Signs on Curved Roadways

Directory of Open Access Journals (Sweden)

Zhongren Wang, Ph.D. P.E. T.E.

2015-01-01

Full Text Available This paper presented a fundamental framework for Changeable Message Sign (CMS placement design along roadways with horizontal curves. This analytical framework determines the available distance for motorists to read and react to CMS messages based on CMS character height, driver's cone of vision, CMS pixel's cone of legibility, roadway horizontal curve radius, and CMS lateral and vertical placement. Sample design charts were developed to illustrate how the analytical framework may facilitate CMS placement design.

The nitrate response of a lowland catchment and groundwater travel times

Science.gov (United States)

van der Velde, Ype; Rozemeijer, Joachim; de Rooij, Gerrit; van Geer, Frans

2010-05-01

Intensive agriculture in lowland catchments causes eutrophication of downstream waters. To determine effective measures to reduce the nutrient loads from upstream lowland catchments, we need to understand the origin of long-term and daily variations in surface water nutrient concentrations. Surface water concentrations are often linked to travel time distributions of water passing through the saturated and unsaturated soil of the contributing catchment. This distribution represents the contact time over which sorption, desorption and degradation takes place. However, travel time distributions are strongly influenced by processes like tube drain flow, overland flow and the dynamics of draining ditches and streams and therefore exhibit strong daily and seasonal variations. The study we will present is situated in the 6.6 km2 Hupsel brook catchment in The Netherlands. In this catchment nitrate and chloride concentrations have been intensively monitored for the past 26 years under steadily decreasing agricultural inputs. We described the complicated dynamics of subsurface water fluxes as streams, ditches and tube drains locally switch between active or passive depending on the ambient groundwater level by a groundwater model with high spatial and temporal resolutions. A transient particle tracking approach is used to derive a unique catchment-scale travel time distribution for each day during the 26 year model period. These transient travel time distributions are not smooth distributions, but distributions that are strongly spiked reflecting the contribution of past rainfall events to the current discharge. We will show that a catchment-scale mass response function approach that only describes catchment-scale mixing and degradation suffices to accurately reproduce observed chloride and nitrate surface water concentrations as long as the mass response functions include the dynamics of travel time distributions caused by the highly variable connectivity of the surface

Variation in Patients' Travel Times among Imaging Examination Types at a Large Academic Health System.

Science.gov (United States)

Rosenkrantz, Andrew B; Liang, Yu; Duszak, Richard; Recht, Michael P

2017-08-01

Patients' willingness to travel farther distances for certain imaging services may reflect their perceptions of the degree of differentiation of such services. We compare patients' travel times for a range of imaging examinations performed across a large academic health system. We searched the NYU Langone Medical Center Enterprise Data Warehouse to identify 442,990 adult outpatient imaging examinations performed over a recent 3.5-year period. Geocoding software was used to estimate typical driving times from patients' residences to imaging facilities. Variation in travel times was assessed among examination types. The mean expected travel time was 29.2 ± 20.6 minutes, but this varied significantly (p travel times were shortest for ultrasound (26.8 ± 18.9) and longest for positron emission tomography-computed tomography (31.9 ± 21.5). For magnetic resonance imaging, travel times were shortest for musculoskeletal extremity (26.4 ± 19.2) and spine (28.6 ± 21.0) examinations and longest for prostate (35.9 ± 25.6) and breast (32.4 ± 22.3) examinations. For computed tomography, travel times were shortest for a range of screening examinations [colonography (25.5 ± 20.8), coronary artery calcium scoring (26.1 ± 19.2), and lung cancer screening (26.4 ± 14.9)] and longest for angiography (32.0 ± 22.6). For ultrasound, travel times were shortest for aortic aneurysm screening (22.3 ± 18.4) and longest for breast (30.1 ± 19.2) examinations. Overall, men (29.9 ± 21.6) had longer (p travel times than women (27.8 ± 20.3); this difference persisted for each modality individually (p ≤ 0.006). Patients' willingness to travel longer times for certain imaging examination types (particularly breast and prostate imaging) supports the role of specialized services in combating potential commoditization of imaging services. Disparities in travel times by gender warrant further investigation. Copyright �

Existence and Stability of Traveling Waves for Degenerate Reaction-Diffusion Equation with Time Delay

Science.gov (United States)

Huang, Rui; Jin, Chunhua; Mei, Ming; Yin, Jingxue

2018-01-01

This paper deals with the existence and stability of traveling wave solutions for a degenerate reaction-diffusion equation with time delay. The degeneracy of spatial diffusion together with the effect of time delay causes us the essential difficulty for the existence of the traveling waves and their stabilities. In order to treat this case, we first show the existence of smooth- and sharp-type traveling wave solutions in the case of c≥c^* for the degenerate reaction-diffusion equation without delay, where c^*>0 is the critical wave speed of smooth traveling waves. Then, as a small perturbation, we obtain the existence of the smooth non-critical traveling waves for the degenerate diffusion equation with small time delay τ >0 . Furthermore, we prove the global existence and uniqueness of C^{α ,β } -solution to the time-delayed degenerate reaction-diffusion equation via compactness analysis. Finally, by the weighted energy method, we prove that the smooth non-critical traveling wave is globally stable in the weighted L^1 -space. The exponential convergence rate is also derived.

Existence and Stability of Traveling Waves for Degenerate Reaction-Diffusion Equation with Time Delay

Science.gov (United States)

Huang, Rui; Jin, Chunhua; Mei, Ming; Yin, Jingxue

2018-06-01

This paper deals with the existence and stability of traveling wave solutions for a degenerate reaction-diffusion equation with time delay. The degeneracy of spatial diffusion together with the effect of time delay causes us the essential difficulty for the existence of the traveling waves and their stabilities. In order to treat this case, we first show the existence of smooth- and sharp-type traveling wave solutions in the case of c≥c^* for the degenerate reaction-diffusion equation without delay, where c^*>0 is the critical wave speed of smooth traveling waves. Then, as a small perturbation, we obtain the existence of the smooth non-critical traveling waves for the degenerate diffusion equation with small time delay τ >0. Furthermore, we prove the global existence and uniqueness of C^{α ,β }-solution to the time-delayed degenerate reaction-diffusion equation via compactness analysis. Finally, by the weighted energy method, we prove that the smooth non-critical traveling wave is globally stable in the weighted L^1-space. The exponential convergence rate is also derived.

Autonomous Vehicles: Disengagements, Accidents and Reaction Times.

Directory of Open Access Journals (Sweden)

Vinayak V Dixit

Full Text Available Autonomous vehicles are being viewed with scepticism in their ability to improve safety and the driving experience. A critical issue with automated driving at this stage of its development is that it is not yet reliable and safe. When automated driving fails, or is limited, the autonomous mode disengages and the drivers are expected to resume manual driving. For this transition to occur safely, it is imperative that drivers react in an appropriate and timely manner. Recent data released from the California trials provide compelling insights into the current factors influencing disengagements of autonomous mode. Here we show that the number of accidents observed has a significantly high correlation with the autonomous miles travelled. The reaction times to take control of the vehicle in the event of a disengagement was found to have a stable distribution across different companies at 0.83 seconds on average. However, there were differences observed in reaction times based on the type of disengagements, type of roadway and autonomous miles travelled. Lack of trust caused by the exposure to automated disengagements was found to increase the likelihood to take control of the vehicle manually. Further, with increased vehicle miles travelled the reaction times were found to increase, which suggests an increased level of trust with more vehicle miles travelled. We believe that this research would provide insurers, planners, traffic management officials and engineers fundamental insights into trust and reaction times that would help them design and engineer their systems.

Autonomous Vehicles: Disengagements, Accidents and Reaction Times.

Science.gov (United States)

Dixit, Vinayak V; Chand, Sai; Nair, Divya J

2016-01-01

Autonomous vehicles are being viewed with scepticism in their ability to improve safety and the driving experience. A critical issue with automated driving at this stage of its development is that it is not yet reliable and safe. When automated driving fails, or is limited, the autonomous mode disengages and the drivers are expected to resume manual driving. For this transition to occur safely, it is imperative that drivers react in an appropriate and timely manner. Recent data released from the California trials provide compelling insights into the current factors influencing disengagements of autonomous mode. Here we show that the number of accidents observed has a significantly high correlation with the autonomous miles travelled. The reaction times to take control of the vehicle in the event of a disengagement was found to have a stable distribution across different companies at 0.83 seconds on average. However, there were differences observed in reaction times based on the type of disengagements, type of roadway and autonomous miles travelled. Lack of trust caused by the exposure to automated disengagements was found to increase the likelihood to take control of the vehicle manually. Further, with increased vehicle miles travelled the reaction times were found to increase, which suggests an increased level of trust with more vehicle miles travelled. We believe that this research would provide insurers, planners, traffic management officials and engineers fundamental insights into trust and reaction times that would help them design and engineer their systems.

Autonomous Vehicles: Disengagements, Accidents and Reaction Times

Science.gov (United States)

Dixit, Vinayak V.; Chand, Sai; Nair, Divya J.

2016-01-01

Autonomous vehicles are being viewed with scepticism in their ability to improve safety and the driving experience. A critical issue with automated driving at this stage of its development is that it is not yet reliable and safe. When automated driving fails, or is limited, the autonomous mode disengages and the drivers are expected to resume manual driving. For this transition to occur safely, it is imperative that drivers react in an appropriate and timely manner. Recent data released from the California trials provide compelling insights into the current factors influencing disengagements of autonomous mode. Here we show that the number of accidents observed has a significantly high correlation with the autonomous miles travelled. The reaction times to take control of the vehicle in the event of a disengagement was found to have a stable distribution across different companies at 0.83 seconds on average. However, there were differences observed in reaction times based on the type of disengagements, type of roadway and autonomous miles travelled. Lack of trust caused by the exposure to automated disengagements was found to increase the likelihood to take control of the vehicle manually. Further, with increased vehicle miles travelled the reaction times were found to increase, which suggests an increased level of trust with more vehicle miles travelled. We believe that this research would provide insurers, planners, traffic management officials and engineers fundamental insights into trust and reaction times that would help them design and engineer their systems. PMID:27997566

The Electric Traveling Salesman Problem with Time Windows

DEFF Research Database (Denmark)

Roberti, Roberto; Wen, Min

2016-01-01

To minimize greenhouse gas emissions, the logistic field has seen an increasing usage of electric vehicles. The resulting distribution planning problems present new computational challenges.We address a problem, called Electric Traveling Salesman Problem with Time Windows. We propose a mixed...

Real-time traveler information market assessment white paper.

Science.gov (United States)

2010-02-22

This report takes a multi-modal look at the lay of the land of the real-time traveler information : market in the United States. This includes identification and characterization of the gaps in the : domestic industry with respect to data cover...

The effect of a new intercity expressway based on travel time reliability using electronic toll collection data

OpenAIRE

Yamazaki, H.; Uno, N.; Kurauchi, F.

2012-01-01

This study describes a method of evaluating the level of service of road networks, based on the average travel time and travel time reliability using electronic toll collection (ETC) data. The authors focused on the variance in travel time under normal circumstances, thus, traffic accidents were removed from the database, and any effect of individual vehicle preference was excluded. They evaluated the travel time distribution based on the average travel time from ETC data for each 15-min inte...

Flow modelling to estimate suspended sediment travel times for two Canadian Deltas

Directory of Open Access Journals (Sweden)

S. R. Fassnacht

2000-01-01

Full Text Available The approximate travel times for suspended sediment transport through two multi-channel networks are estimated using flow modelling. The focus is on the movement of high sediment concentrations that travel rapidly downstream. Since suspended sediment transport through river confluences and bifurcation movement is poorly understood, it is assumed that the sediment moves at approximately the average channel velocity during periods of high sediment load movement. Calibration of the flow model is discussed, with an emphasis on the incorporation of cross-section data, that are not referenced to a datum, using a continuous water surface profile. Various flow regimes are examined for the Mackenzie and the Slave River Deltas in the Northwest Territories, Canada, and a significant variation in travel times is illustrated. One set of continuous daily sediment measurements throughout the Mackenzie Delta is used to demonstrate that the travel time estimates are reasonable. Keywords: suspended sediment; multi-channel river systems; flow modelling; sediment transport

Support technology of deep roadway under high stress and its application

Institute of Scientific and Technical Information of China (English)

Cao Rihong; Cao Ping; Lin Hang

2016-01-01

Roadway instability has been a major concern in the fields of mining engineering. This paper aims to pro-vide practical and efficient strategy to support the roadways under high in-situ stress. A case study on the stability of deep roadways was carried out in an underground mine in Gansu province, China. Currently, the surrounding rock strata is extremely fractured, which results in a series of engineering disasters, such as side wall collapse and severe floor heave in the past decades. Aiming to solve these problems, an improved support method was proposed, which includes optimal bolt parameters and arrangement, floor beam layout by grooving, and full length grouting. Based on the modeling results by FLAC3D, the new support method is much better than the current one in terms of preventing the large deformation of sur-rounding rock and restricting the development of plastic zones. For implementation and verification, field experiments, along with deformation monitoring, were conducted in the 958 level roadway of Mining II areas. The results show that the improved support can significantly reduce surrounding rock deforma-tion, avoid frequent repair, and maintain the long-term stability of the roadway. Compared to the original support, the new support method can greatly save investment of mines, and has good application value and popularization value.

A Quantitative Analysis of the Relationship Between Radiation Therapy Use and Travel Time

Energy Technology Data Exchange (ETDEWEB)

Liu, Emma; Santibáñez, Pablo [British Columbia Cancer Agency, Vancouver, British Columbia (Canada); Puterman, Martin L. [Sauder School of Business, University of British Columbia, Vancouver, British Columbia (Canada); Weber, Leah; Ma, Xiang [British Columbia Cancer Agency, Vancouver, British Columbia (Canada); Sauré, Antoine [Sauder School of Business, University of British Columbia, Vancouver, British Columbia (Canada); Olivotto, Ivo A.; Halperin, Ross; French, John [British Columbia Cancer Agency, Vancouver, British Columbia (Canada); Tyldesley, Scott, E-mail: styldesl@bccancer.bc.ca [British Columbia Cancer Agency, Vancouver, British Columbia (Canada)

2015-11-01

Purpose: To model and quantify the relationship between radiation therapy (RT) use and travel time to RT services. Methods and Materials: Population-based registries and databases were used to identify both incident cancer patient and patients receiving RT within 1 year of diagnosis (RT1y) in British Columbia, Canada, between 1992 and 2011. The effects of age, gender, diagnosis year, income, prevailing wait time, and travel duration for RT on RT1y were assessed. Significant factors from univariate analyses were included in a multivariable logistic regression model. The shape of the travel time–RT1y curve was represented by generalized additive and segmented regression models. Analyses were conducted for breast, lung, and genitourinary cancer separately and for all cancer sites combined. Results: After adjustment for age, gender, diagnosis year, income, and prevailing wait times, increasing travel time to the closest RT facility had a negative impact RT1y. The shape of the travel time–RT1y curve varied with cancer type. For breast cancer, the odds of RT1y were constant for the first 2 driving hours and decreased at 17% per hour thereafter. For lung cancer, the odds of RT1y decreased by 16% after 20 minutes and then decreased at 6% per hour. Genitourinary cancer RT1y was relatively independent of travel time. For all cancer sites combined, the odds of RT1y were constant within the first 2 driving hours and decreased at 7% per hour thereafter. Conclusions: Travel time to receive RT has a different impact on RT1y for different tumor sites. The results provide evidence-based insights for the configuration of catchment areas for new and existing cancer centers providing RT.

A Quantitative Analysis of the Relationship Between Radiation Therapy Use and Travel Time

International Nuclear Information System (INIS)

Liu, Emma; Santibáñez, Pablo; Puterman, Martin L.; Weber, Leah; Ma, Xiang; Sauré, Antoine; Olivotto, Ivo A.; Halperin, Ross; French, John; Tyldesley, Scott

2015-01-01

Purpose: To model and quantify the relationship between radiation therapy (RT) use and travel time to RT services. Methods and Materials: Population-based registries and databases were used to identify both incident cancer patient and patients receiving RT within 1 year of diagnosis (RT1y) in British Columbia, Canada, between 1992 and 2011. The effects of age, gender, diagnosis year, income, prevailing wait time, and travel duration for RT on RT1y were assessed. Significant factors from univariate analyses were included in a multivariable logistic regression model. The shape of the travel time–RT1y curve was represented by generalized additive and segmented regression models. Analyses were conducted for breast, lung, and genitourinary cancer separately and for all cancer sites combined. Results: After adjustment for age, gender, diagnosis year, income, and prevailing wait times, increasing travel time to the closest RT facility had a negative impact RT1y. The shape of the travel time–RT1y curve varied with cancer type. For breast cancer, the odds of RT1y were constant for the first 2 driving hours and decreased at 17% per hour thereafter. For lung cancer, the odds of RT1y decreased by 16% after 20 minutes and then decreased at 6% per hour. Genitourinary cancer RT1y was relatively independent of travel time. For all cancer sites combined, the odds of RT1y were constant within the first 2 driving hours and decreased at 7% per hour thereafter. Conclusions: Travel time to receive RT has a different impact on RT1y for different tumor sites. The results provide evidence-based insights for the configuration of catchment areas for new and existing cancer centers providing RT.

Use of Low-Level Sensor Data to Improve the Accuracy of Bluetooth-Based Travel Time Estimation

DEFF Research Database (Denmark)

Araghi, Bahar Namaki; Christensen, Lars Tørholm; Krishnan, Rajesh

2013-01-01

by a single device. The latter situation could lead to location ambiguity and could reduce the accuracy of travel time estimation. Therefore, the accuracy of travel time estimation by Bluetooth technology depends on how location ambiguity is handled by the estimation method. The issue of multiple detection...... events in the context of travel time estimation by Bluetooth technology has been considered by various researchers. However, treatment of this issue has been simplistic. Most previous studies have used the first detection event (enter-enter) as the best estimate. No systematic analysis has been conducted...... to explore the most accurate method of travel time estimation with multiple detection events. In this study, different aspects of the Bluetooth detection zone, including size and impact on the accuracy of travel time estimation, were discussed. Four methods were applied to estimate travel time: enter...

METHOD OF ESTIMATING THE TRAVEL TIME OF NONINTERACTING SOLUTES THROUGH COMPACTED SOIL MATERIAL

Science.gov (United States)

The pollutant travel time through compacted soil material (i.e., when a pollutant introduced at the top first appears at the bottom) cannot be accurately predicted from the permeability (saturated hydraulic conductivity) alone. The travel time is also dependent on the effective p...

Using prospect theory to investigate the low marginal value of travel time for small time changes

DEFF Research Database (Denmark)

Hjorth, Katrine; Fosgerau, Mogens

2012-01-01

A common finding in stated preference studies that measure the value of travel time (VTT) is that the measured VTT increases with the size of the time change considered, in conflict with standard neoclassical economic theory. We present a new test of a possible explanation for the phenomenon...... that builds on the diminishing or constant sensitivity of the value functions in prospect theory.We use stated preference data with trade-offs between travel time and money that provide separate identification of the degrees of diminishing sensitivity for time and money gains and losses. This enables us...

Incorporating space-time constraints and activity-travel time profiles in a multi-state supernetwork approach to individual activity-travel scheduling

NARCIS (Netherlands)

Liao, F.; Arentze, T.A.; Timmermans, H.J.P.

2013-01-01

Activity-travel scheduling is at the core of many activity-based models that predict short-term effects of travel information systems and travel demand management. Multi-state supernetworks have been advanced to represent in an integral fashion the multi-dimensional nature of activity-travel

Time travel and warp drives a scientific guide to shortcuts through time and space

CERN Document Server

Everett, Allen

2012-01-01

Sci-fi makes it look so easy. Receive a distress call from Alpha Centauri? No problem: punch the warp drive and you're there in minutes. Facing a catastrophe that can't be averted? Just pop back in the timestream and stop it before it starts. But for those of us not lucky enough to live in a science-fictional universe, are these ideas merely flights of fancy—or could it really be possible to travel through time or take shortcuts between stars?Cutting-edge physics may not be able to answer those questions yet, but it does offer up some tantalizing possibilities. In Time Travel and W

Influence of a Large Pillar on the Optimum Roadway Position in an Extremely Close Coal Seam

Directory of Open Access Journals (Sweden)

Li Yang

2016-01-01

Full Text Available Based on the mining practice in an extremely close coal seam, theoretical analysis was conducted on the vertical stress distribution of the floor strata under a large coal pillar. The vertical stress distribution regulation of a No. 5 coal seam was revealed. To obtain the optimum position of the roadway that bears the supporting pressure of a large coal pillar, numerical modeling was applied to analyze the relation among the stress distribution of the roadway surrounding the rock that bears the supporting pressure of a large coal pillar, the plastic zone distribution of the roadway surrounding the rock, the surrounding rock deformation, and the roadway layout position. The theoretical calculation results of the stress value, stress variation rate, and influencing range of the stress influencing angle showed that the reasonable malposition of the No. 5 coal seam roadway was an inner malposition of 4 m. The mining practice showed the following: the layout of No. 25301 panel belt roadway at the position of the inner malposition of 4 m was reasonable, the roadway support performance was favourable without deformation, and ground pressure was not obvious. The research achievement of this study is the provision of a reference for roadway layouts under similar conditions.

Calculation of the Chilling Requirement for Air Conditioning in the Excavation Roadway

Directory of Open Access Journals (Sweden)

Yueping Qin

2015-10-01

Full Text Available To effectively improve the climate conditions of the excavation roadway in coal mine, the calculation of the chilling requirement taking air conditioning measures is extremely necessary. The temperature field of the surrounding rock with moving boundary in the excavation roadway was numerically simulated by using finite volume method. The unstable heat transfer coefficient between the surrounding rock and air flow was obtained via the previous calculation. According to the coupling effects of the air flow inside and outside air duct, the differential calculation mathematical model of air flow temperature in the excavation roadway was established. The chilling requirement was calculated with the selfdeveloped computer program for forecasting the required cooling capacity of the excavation roadway. A good air conditioning effect had been observed after applying the calculated results to field trial, which indicated that the prediction method and calculation procedure were reliable.

Convergent mechanism of roadway driven along with strong roof of special thick stratum and its controlled measures

Energy Technology Data Exchange (ETDEWEB)

Zhai, X.; Qian, M.; Jing, G.; Li, Y. [China University of Mining and Technology, Beijing (China). College of Resource and Safety Engineering

2004-06-01

The trapezoidal cross-section roadway, driven along with its medium and fine grain sandstone roof in special thick stratum, was situated in shale strata of the Wu{sub 2} coal seam of the Shihhotze Perno-carboniferous group. Rock-lining wall was employed in roadway, which its roof is in the free situation. Under the action of virgin stress, the surrounding rock of roadway was stable. While under the action of fixed abutment pressure arisen from protection pillar of roadway, which if two sides seams were extracted the free strong roof of roadway was stable. But its two sides rock-lining walls was fractured, partially broken into pieces, and its floor heave was obvious. The velocity of floor heave is 0.4 - 0.8 mm/d. The size of the broken zone of surrounding rock of roadway doubled. An effective load coefficient of surrounding rock was quoted to illustrate these phenomena. The main reasons of roadway convergence are that rock property of surrounding rock is inferior, protection pillars affects its stability, and the supporting pattern employed is improper. Effective measures to control roadway convergence should be bolting and grouting lining, which mainly consolidate surrounding rock of roadway. 4 refs., 1 fig.

The Optimization of Passengers’ Travel Time under Express-Slow Mode Based on Suburban Line

Directory of Open Access Journals (Sweden)

Xiaobing Ding

2016-01-01

Full Text Available The suburban line connects the suburbs and the city centre; it is of huge advantage to attempt the express-slow mode. The passengers’ average travel time is the key factor to reflect the level of rail transport services, especially under the express-slow mode. So it is important to study the passengers’ average travel time under express-slow, which can get benefit on the optimization of operation scheme. First analyze the main factor that affects passengers’ travel time and then mine the dynamic interactive relationship among the factors. Second, a new passengers’ travel time evolution algorithm is proposed after studying the stop schedule and the proportion of express/slow train, and then membrane computing theory algorithm is introduced to solve the model. Finally, Shanghai Metro Line 22 is set as an example to apply the optimization model to calculate the total passengers’ travel time; the result shows that the total average travel time under the express-slow mode can save 1 minute and 38 seconds; the social influence and value of it are very huge. The proposed calculation model is of great help for the decision of stop schedule and provides theoretical and methodological support to determine the proportion of express/slow trains, improves the service level, and enriches and complements the rail transit operation scheme optimization theory system.

A Study of the Large Deformation Mechanism and Control Techniques for Deep Soft Rock Roadways

Directory of Open Access Journals (Sweden)

Xiaojie Yang

2018-04-01

Full Text Available Large deformation control of deep soft rock roadways has been a major problem in mining activities worldwide. This paper considers the supporting problem related to large deformation of a deep soft rock roadway in Chao’hua coal mine. The discrete element simulation method (UDEC software is adopted to simulate a tailgate of panel 31041 in Chao’hua coal mine. The failure patterns of unsupported and primary supported roadway are simulated, and these reveal the characteristics of deformation, stress and crack propagation. The excavation of roadway leads to high deviator stress, which exceeds the peak strength of shallow surrounding rock and causes it to enter the post-failure stage. Tensile failures then initiate and develop around the roadway, which causes the fragmentation, dilation and separation of shallow surrounding rock. The compressive capacity of the primary support system is low, which results in serious contraction in the full section of the roadway. An improved control scheme is put forward for the support of a tailgate. The underground test results confirm that the improved support system effectively controlled large deformation of the surrounding rocks, which can provide references for support in the design of roadways excavated in deep soft stratum.

Travel Time Model for Right-Turning Vehicles of Secondary Street at Unsignalized Intersections

Directory of Open Access Journals (Sweden)

Feng Yu-Qin

2013-01-01

Full Text Available The travel time of right-turning vehicles on secondary street at unsignalized intersection is discussed in this paper. Under the assumption that the major-street through vehicles’ headway follows Erlang distribution and secondary-street right-turning vehicles’ headway follows Poisson distribution. The right-turning vehicles travel time model is established on the basis of gap theory and M/G/1 queue theory. Comparison is done with the common model based on the assumption that the major-street vehicles’ headway follows Poisson distribution. An intersection is selected to verify each model. The results show that the model established in this paper has stronger applicability, and its most relative error is less than 15%. In addition, the sensitivity analysis has been done. The results show that right-turning flow rate and major-street flow rate have a significant impact on the travel time. Hence, the methodology for travel time of right-turning vehicles at unsignalized intersection proposed in this paper is effective and applicable.

Penanganan Fuzzy Time Window pada Travelling Salesman Problem (TSP dengan Penerapan Algoritma Genetika

Directory of Open Access Journals (Sweden)

Gusti Eka Yuliastuti

2017-03-01

Full Text Available The route of the travel tour packages offered by travel agents is not considered optimum, so the level of satisfaction the tourist is not maximal. Selection of the route of the travel packages included in the traveling salesman problem (TSP. The problem that occurs is uncertain tourists visiting destinations at the best destinations timing hereinafter be referred to as the fuzzy time window problem. Therefore, the authors apply the genetic algorithm to solve the problem. Based on test results obtained optimum solution with the fitness value of 1.3291, a population size of 100, the number of generations of 1000, a combination of CR=0,4 and MR=0.6.

Effect of Weight and Roadway Grade on the Fuel Economy of Class-8 Frieght Trucks

Energy Technology Data Exchange (ETDEWEB)

Franzese, Oscar [ORNL; Davidson, Diane [ORNL

2011-11-01

In 2006-08, the Oak Ridge National Laboratory, in collaboration with several industry partners, collected real-world performance and situational data for long-haul operations of Class-8 trucks from a fleet engaged in normal freight operations. Such data and information are useful to support Class-8 modeling of combination truck performance, technology evaluation efforts for energy efficiency, and to provide a means of accounting for real-world driving performance within combination truck research and analyses. The present study used the real-world information collected in that project to analyze the effects that vehicle speed and vehicle weight have on the fuel efficiency of Class-8 trucks. The analysis focused on two type of terrains, flat (roadway grades ranging from -1% to 1%) and mild uphill terrains (roadway grades ranging from 1% to 3%), which together covered more than 70% of the miles logged in the 2006-08 project (note: almost 2/3 of the distance traveled on mild uphill terrains was on terrains with 1% to 2% grades). In the flat-terrain case, the results of the study showed that for light and medium loads, fuel efficiency decreases considerably as speed increases. For medium-heavy and heavy loads (total vehicle weight larger than 65,000 lb), fuel efficiency tends to increase as the vehicle speed increases from 55 mph up to about 58-60 mph. For speeds higher than 60 mph, fuel efficiency decreases at an almost constant rate with increasing speed. At any given speed, fuel efficiency decreases and vehicle weight increases, although the relationship between fuel efficiency and vehicle weight is not linear, especially for vehicle weights above 65,000 lb. The analysis of the information collected while the vehicles were traveling on mild upslope terrains showed that the fuel efficiency of Class-8 trucks decreases abruptly with vehicle weight ranging from light loads up to medium-heavy loads. After that, increases in the vehicle weight only decrease fuel

Effect of travel distance and time to radiotherapy on likelihood of receiving mastectomy.

Science.gov (United States)

Goyal, Sharad; Chandwani, Sheenu; Haffty, Bruce G; Demissie, Kitaw

2015-04-01

Breast-conserving surgery (BCS) followed by adjuvant radiation therapy (RT) is the standard of care for women with early-stage breast cancer as an alternative to mastectomy. The purpose of this study was to examine the relationship between receipt of mastectomy and travel distance and time to RT facility in New Jersey (NJ). Data were collected from a cohort of 634 NJ women diagnosed with early-stage breast cancer. In patients receiving RT, the precise RT facility was used, whereas in patients not receiving RT, surgeons were contacted to determine the location of RT referral. Travel distance and time to RT facility from the patients' residential address were modeled separately using multiple binomial regression to examine their association with choice of surgery while adjusting for clinical and sociodemographic factors. Overall, 58.5 % patients underwent BCS with median travel distance to the radiation facility of 4.8 miles (vs. 6.6 miles for mastectomy) and median travel time of 12.0 min (vs. 15.0 min for mastectomy). Patients residing > 9.2 miles compared with ≤ 9.2 miles from radiation facility were 44 % more likely to receive mastectomy. Additionally, patients requiring > 19 min compared with ≤ 19 min of travel time were 36 % more likely to receive mastectomy. These data found that travel distance and time from RT facility act as barriers to undergoing BCS in women with early-stage breast cancer. Despite being in an urban region, a significant number of women in NJ with early-stage breast cancer did not receive BCS.

CONSIDERING TRAVEL TIME RELIABILITY AND SAFETY FOR EVALUATION OF CONGESTION RELIEF SCHEMES ON EXPRESSWAY SEGMENTS

Directory of Open Access Journals (Sweden)

Babak MEHRAN

2009-01-01

Full Text Available Evaluation of the efficiency of congestion relief schemes on expressways has generally been based on average travel time analysis. However, road authorities are much more interested in knowing the possible impacts of improvement schemes on safety and travel time reliability prior to implementing them in real conditions. A methodology is presented to estimate travel time reliability based on modeling travel time variations as a function of demand, capacity and weather conditions. For a subject expressway segment, patterns of demand and capacity were generated for each 5-minute interval over a year by using the Monte-Carlo simulation technique, and accidents were generated randomly according to traffic conditions. A whole year analysis was performed by comparing demand and available capacity for each scenario and shockwave analysis was used to estimate the queue length at each time interval. Travel times were estimated from refined speed-flow relationships and buffer time index was estimated as a measure of travel time reliability. it was shown that the estimated reliability measures and predicted number of accidents are very close to observed values through empirical data. After validation, the methodology was applied to assess the impact of two alternative congestion relief schemes on a subject expressway segment. one alternative was to open the hard shoulder to traffic during the peak period, while the other was to reduce the peak period demand by 15%. The extent of improvements in travel conditions and safety, likewise the reduction in road users' costs after implementing each improvement scheme were estimated. it was shown that both strategies can result in up to 23% reduction in the number of occurred accidents and significant improvements in travel time reliability. Finally, the advantages and challenging issues of selecting each improvement scheme were discussed.

[Characterization and source apportionment of pollutants in urban roadway runoff in Chongqing].

Science.gov (United States)

Zhang, Qian-Qian; Wang, Xiao-Ke; Hao, Li-Ling; Hou, Pei-Qiang; Ouyang, Zhi-Yun

2012-01-01

By investigating surface runoff from urban roadway in Chongqing, we assessed the characteristics of surface runoff pollution and the effect of rainfall intensity and antecedent dry weather period on water quality. Using multivariate statistical analysis of data of runoff quality, potential pollutants discharged from urban roadway runoff were identified. The results show that the roadway runoff has high levels of COD, TP and TN, the EMC were 60.83-208.03 mg x L(-1), 0.47-1.01 mg x L(-1) and 2.07-5.00 mg x L(-1) respectively, being the main pollutants; The peaks of pollutant concentration are ahead of or synchronous with the peak of runoff volume; the peaks of pollutant concentrations are mostly occurred within 10 minutes of rainfall. The heavy metal concentrations fluctuate dentately during runoff proceeding. Two potential pollution sources to urban roadway runoff apportioned by using principal component analysis are: vehicle's traffic loss and atmospheric dry and wet deposition, and municipal wastes.

Water Travel Time Distributions in Permafrost-affected Catchments: Challenges, Progress and Implications

Science.gov (United States)

Smith, A. A.; Piovano, T. I.; Tetzlaff, D.; Ala-aho, P. O. A.; Wookey, P. A.; Soulsby, C.

2017-12-01

Characterising the travel times of water has been a major research focus in catchment science over the past decade. Use of isotopes to quantify the temporal dynamics of the transformation of precipitation into runoff has revealed fundamental new insights into catchment flow paths and mixing processes that influence biogeochemical transport. However, permafrost-affected catchments have received little attention, despite their global importance in terms of rapid environmental change. Such places have limited access for data collection during critical periods (e.g. early phases of snowmelt), temporal and spatially variable freeze-thaw cycles, and the development of the active layer has a time variant influence on catchment hydrology. All of these characteristics make the application of traditional transit time estimation approaches challenging. This contribution describes an isotope-based study undertaken to provide a preliminary assessment of travel times at SikSik Creek in the Canadian Arctic. We adopted a model-data fusion approach to estimate the volumes and isotopic characteristics of snowpack and meltwater. Using sampling in the spring/summer we characterise the isotopic composition of summer rainfall, melt from residual snow, soil water and stream water. In addition, soil moisture dynamics and the temporal evolution of the active layer profile were also monitored. Transit times were estimated for soil and stream water compositions using lumped convolution integral models and temporally variable inputs including snowmelt, ice thaw, and summer rainfall. Comparing transit time estimates using a variety of inputs reveals transit time is best estimated using all available inflows (i.e. snowmelt, ice thaw, and rainfall). Early spring transit times are short, dominated by snowmelt and ice thaw and limited catchment storage when soils are predominantly frozen. However, significant and increasing mixing with water in the active layer during the summer results in more

Uncertainty analyses of unsaturated zone travel time at Yucca Mountain

International Nuclear Information System (INIS)

Nichols, W.E.; Freshley, M.D.

1993-01-01

Uncertainty analysis method can be applied to numerical models of ground-water flow to estimate the relative importance of physical and hydrologic input variables with respect to ground-water travel time. Monte Carlo numerical simulations of unsaturated flow in the Calico Hills nonwelded zeolitic (CHnz) layer at Yucca Mountain, Nevada, indicate that variability in recharge, and to a lesser extent in matrix porosity, explains most of the variability in predictions of water travel time through the unsaturated zone. Variations in saturated hydraulic conductivity and unsaturated curve-fitting parameters were not statistically significant in explaining variability in water travel time through the unsaturated CHnz unit. The results of this study suggest that the large uncertainty associated with recharge rate estimates for the Yucca Mountain site is of concern because the performance of the potential repository would be more sensitive to uncertainty in recharge than to any other parameter evaluated. These results are not exhaustive because of the limited site characterization data available and because of the preliminary nature of this study, which is limited to a single stratigraphic unit, one dimension, and does not account for fracture flow or other potential fast pathways at Yucca Mountain

Urban Link Travel Time Prediction Based on a Gradient Boosting Method Considering Spatiotemporal Correlations

Directory of Open Access Journals (Sweden)

Faming Zhang

2016-11-01

Full Text Available The prediction of travel times is challenging because of the sparseness of real-time traffic data and the intrinsic uncertainty of travel on congested urban road networks. We propose a new gradient–boosted regression tree method to accurately predict travel times. This model accounts for spatiotemporal correlations extracted from historical and real-time traffic data for adjacent and target links. This method can deliver high prediction accuracy by combining simple regression trees with poor performance. It corrects the error found in existing models for improved prediction accuracy. Our spatiotemporal gradient–boosted regression tree model was verified in experiments. The training data were obtained from big data reflecting historic traffic conditions collected by probe vehicles in Wuhan from January to May 2014. Real-time data were extracted from 11 weeks of GPS records collected in Wuhan from 5 May 2014 to 20 July 2014. Based on these data, we predicted link travel time for the period from 21 July 2014 to 25 July 2014. Experiments showed that our proposed spatiotemporal gradient–boosted regression tree model obtained better results than gradient boosting, random forest, or autoregressive integrated moving average approaches. Furthermore, these results indicate the advantages of our model for urban link travel time prediction.

Perinatal outcomes and travel time from home to hospital: Welsh data from 1995 to 2009.

Science.gov (United States)

Paranjothy, Shantini; Watkins, W John; Rolfe, Kim; Adappa, Roshan; Gong, Yi; Dunstan, Frank; Kotecha, Sailesh

2014-12-01

To study the association between travel time from home to hospital and birth outcomes. For all registrable births to women resident in Wales (1995-2009), we calculated the travel time between the mother's residence and the postcode-based location for both the birth hospital and all hospitals with maternity services that were open. Using logistic regression, we obtained odds ratios for the association between travel time and each birth outcome, adjusted for confounders. In our analysis of 412 827 singleton births, for every 15-min increase in travel time to the birth hospital, there was an increased risk of early (n = 609; OR: 1.13; 95%CI: 1.07, 1.20) and late neonatal death (n = 251; OR: 1.15; 95%CI: 1.05, 1.26). Results for intrapartum stillbirth were inconclusive (n = 135; OR: 1.13; 95%CI: 0.98, 1.30). For the above-combined (n = 995) results, we get OR: 1.15, 95%CI: 1.09, 1.20. No association was found with travel time to the nearest hospital (OR: 1.01; 95%CI: 0.90, 1.13 per 15-min increase in travel time) for the composite outcome of intrapartum stillbirth and neonatal deaths. Longer travel time to the birth hospital was associated with increased risk of neonatal deaths, but there was no strong evidence of association with the geographical location of maternity services. ©2014 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Impact of data source on travel time reliability assessment.

Science.gov (United States)

2014-08-01

Travel time reliability measures are becoming an increasingly important input to the mobility and : congestion management studies. In the case of Maryland State Highway Administration, reliability : measures are key elements in the agencys Annual ...

Mind your travel ! Motivation, time use, and intent : Three factors of travel to be investigated

OpenAIRE

PAPON , Francis; Meissonnier , Joël

2013-01-01

The objective is to investigate the drivers of travel demand beyond the need to travel to destination; travellers may engage a trip for the sake of it, at least to some extent: travel includes a share of 'primary utility'. The paper focuses on two types of data and analysis: the primary utility of travel questions passed in the last French national travel survey, and eight dimensions of a trip proposed from a sociological analysis. The paper mixes these approaches and correlate survey answ...

49 CFR 214.521 - Flagging equipment for on-track roadway maintenance machines and hi-rail vehicles.

Science.gov (United States)

2010-10-01

... maintenance machines and hi-rail vehicles. 214.521 Section 214.521 Transportation Other Regulations Relating... WORKPLACE SAFETY On-Track Roadway Maintenance Machines and Hi-Rail Vehicles § 214.521 Flagging equipment for on-track roadway maintenance machines and hi-rail vehicles. Each on-track roadway maintenance machine...

Effects of travel time delay on multi-faceted activity scheduling under space-time constraints : a simulation study

NARCIS (Netherlands)

Rasouli, S.; Timmermans, H.J.P.

2014-01-01

This paper presents the results of a study, which simulates the effects of travel time delay on adaptations of planned activity-travel schedules. The activity generation and scheduling engine of the Albatross model system is applied to a fraction of the synthetic population of the Rotterdam region,

Urban Freight Management with Stochastic Time-Dependent Travel Times and Application to Large-Scale Transportation Networks

Directory of Open Access Journals (Sweden)

Shichao Sun

2015-01-01

Full Text Available This paper addressed the vehicle routing problem (VRP in large-scale urban transportation networks with stochastic time-dependent (STD travel times. The subproblem which is how to find the optimal path connecting any pair of customer nodes in a STD network was solved through a robust approach without requiring the probability distributions of link travel times. Based on that, the proposed STD-VRP model can be converted into solving a normal time-dependent VRP (TD-VRP, and algorithms for such TD-VRPs can also be introduced to obtain the solution. Numerical experiments were conducted to address STD-VRPTW of practical sizes on a real world urban network, demonstrated here on the road network of Shenzhen, China. The stochastic time-dependent link travel times of the network were calibrated by historical floating car data. A route construction algorithm was applied to solve the STD problem in 4 delivery scenarios efficiently. The computational results showed that the proposed STD-VRPTW model can improve the level of customer service by satisfying the time-window constraint under any circumstances. The improvement can be very significant especially for large-scale network delivery tasks with no more increase in cost and environmental impacts.

Approaching the Brachistochrone Using Inclined Planes--Striving for Shortest or Equal Travelling Times

Science.gov (United States)

Theilmann, Florian

2017-01-01

The classical "brachistochrone" problem asks for the path on which a mobile point M just driven by its own gravity will travel in the shortest possible time between two given points "A" and "B." The resulting curve, the cycloid, will also be the "tautochrone" curve, i.e. the travelling time of the mobile…

Numerical simulation of phenomenon on zonal disintegration in deep underground mining in case of unsupported roadway

Science.gov (United States)

Han, Fengshan; Wu, Xinli; Li, Xia; Zhu, Dekang

2018-02-01

Zonal disintegration phenomenon was found in deep mining roadway surrounding rock. It seriously affects the safety of mining and underground engineering and it may lead to the occurrence of natural disasters. in deep mining roadway surrounding rock, tectonic stress in deep mining roadway rock mass, horizontal stress is much greater than the vertical stress, When the direction of maximum principal stress is parallel to the axis of the roadway in deep mining, this is the main reasons for Zonal disintegration phenomenon. Using ABAQUS software to numerical simulation of the three-dimensional model of roadway rupture formation process systematically, and the study shows that when The Direction of maximum main stress in deep underground mining is along the roadway axial direction, Zonal disintegration phenomenon in deep underground mining is successfully reproduced by our numerical simulation..numerical simulation shows that using ABAQUA simulation can reproduce Zonal disintegration phenomenon and the formation process of damage of surrounding rock can be reproduced. which have important engineering practical significance.

Modeling, implementation, and validation of arterial travel time reliability.

Science.gov (United States)

2013-11-01

Previous research funded by Florida Department of Transportation (FDOT) developed a method for estimating : travel time reliability for arterials. This method was not initially implemented or validated using field data. This : project evaluated and r...

Travel Patterns and Characteristics of Elderly Subpopulation in New York State

Energy Technology Data Exchange (ETDEWEB)

Hwang, Ho-Ling [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilson, Daniel W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Reuscher, Tim [Macrosys, Arlington, VA (United States); Yang, Jianjiang [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Taylor, Rob D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chin, Shih-Miao [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-03-01

With the increasing demographic shift towards a larger population of elderly (individuals 65 years and older), it is essential for policy makers and planners to have an understanding of transportation issues that affect the elderly. These issues include livability of the community, factors impacting travel behavior and mobility, transportation safety, etc. In this study, Oak Ridge National Laboratory was tasked by the New York State (NYS) Department of Transportation to conduct a detailed examination of travel behaviors, and identify patterns and trends of the elderly within NYS. The National Household Travel Survey (NHTS) was used as the primary data source to analyze subjects and address questions such as: Are there differences in traveler demographics between the elderly population and those of younger age groups who live in various NYS regions; e.g., New York City, other urban areas of NYS, or other parts of the country? How do they compare with the population at large? Are there any regional differences (e.g., urban versus rural)? Gender differences? Do any unique travel characteristics or patterns exist within the elderly group? In addition to analysis of NHTS data, roadway travel safety concerns associated with elderly travelers were also investigated in this study. Specifically, data on accidents involving the elderly (including drivers, passengers, and others) as captured in the Fatal Analysis Reporting System (FARS) database was analyzed to examine elderly driver and elderly pedestrian travel safety issues in NYS. The analyses of these data sets provide a greater understanding of the elderly within NYS and their associated transportation issues. Through this study, various key findings on elderly population size, household characteristics, and travel patterns were produced and are report herein this report.

Modeling, implementation, and validation of arterial travel time reliability : [summary].

Science.gov (United States)

2013-11-01

Travel time reliability (TTR) has been proposed as : a better measure of a facilitys performance than : a statistical measure like peak hour demand. TTR : is based on more information about average traffic : flows and longer time periods, thus inc...

The influence of travel time on breast cancer characteristics, receipt of primary therapy, and surveillance mammography.

Science.gov (United States)

Onega, Tracy; Cook, Andrea; Kirlin, Beth; Shi, Xun; Alford-Teaster, Jennifer; Tuzzio, Leah; Buist, Diana S M

2011-08-01

Travel time has been shown to influence some aspects of cancer characteristics at diagnosis and care for women with breast cancer, but important gaps remain in our understanding of its impact. We examined the influence of travel time to the nearest radiology facility on breast cancer characteristics, treatment, and surveillance for women with early-stage invasive breast cancer. We included 1,012 women with invasive breast cancer (stages I and II) who had access to care within an integrated health care delivery system in western Washington State. The travel times to the nearest radiology facility were calculated for all the U.S. Census blocks within the study area and assigned to women based on residence at diagnosis. We collected cancer characteristics, primary and adjuvant therapies, and surveillance mammography for at least 2.5 years post diagnosis and used multivariable analyses to test the associations of travel time. The majority of women (68.6%) lived within 20 min of the nearest radiology facility, had stage I disease (72.7%), received breast conserving therapy (68.7%), and had annual surveillance mammography the first 2 years after treatment (73.7%). The travel time was not significantly associated with the stage or surveillance mammography after adjusting for covariates. Primary therapy was significantly related to travel time, with greater travel time (>30 min vs. ≤ 10 min) associated with a higher likelihood of mastectomy compared to breast conserving surgery (RR = 1.53; 95% CI, 1.16-2.01). The travel time was not associated with the stage at diagnosis or surveillance mammography receipt. The travel time does seem to influence the type of primary therapy among women with breast cancer, suggesting that women may prefer low frequency services, such as mastectomy, if geographic access to a radiology facility is limited.

Evaluation of Effective Factors on Travel Time in Optimization of Bus Stops Placement Using Genetic Algorithm

Science.gov (United States)

Bargegol, Iraj; Ghorbanzadeh, Mahyar; Ghasedi, Meisam; Rastbod, Mohammad

2017-10-01

In congested cities, locating and proper designing of bus stops according to the unequal distribution of passengers is crucial issue economically and functionally, since this subject plays an important role in the use of bus system by passengers. Location of bus stops is a complicated subject; by reducing distances between stops, walking time decreases, but the total travel time may increase. In this paper, a specified corridor in the city of Rasht in north of Iran is studied. Firstly, a new formula is presented to calculate the travel time, by which the number of stops and consequently, the travel time can be optimized. An intended corridor with specified number of stops and distances between them is addressed, the related formulas to travel time are created, and its travel time is calculated. Then the corridor is modelled using a meta-heuristic method in order that the placement and the optimal distances of bus stops for that are determined. It was found that alighting and boarding time along with bus capacity are the most effective factors affecting travel time. Consequently, it is better to have more concentration on indicated factors for improving the efficiency of bus system.

Roadway supports

Energy Technology Data Exchange (ETDEWEB)

Stassen, P

1980-01-01

Support systems in stone drifts and tunnels are discussed. Timber supports, steel arches, cold-bent sheet-metal arches, shotcrete and combined support arrangements are described. Brickwork and reinforced concrete are also covered. Supports in roadways leading to the face and in-seam roads are discussed including timber supports, steel arches, articulated arches on timber chocks, support accessories and the withdrawal and reshaping of arches. The subject of strata bolting, the aims of strata bolting, methods of strata bolting, systems of rock-bolting, end plates and wire mesh, and bolt and anchorage monitoring are also discussed. Injection techniques, injection parameters, injection methods, grouts, includes an example of the application of injection techniques are covered and combined injection/dowelling arrangements are examined. (55 refs.) (In French)

Maternal Residential Proximity to Major Roadways and Pediatric Embryonal Tumors in Offspring

Directory of Open Access Journals (Sweden)

Shwetha V. Kumar

2018-03-01

Full Text Available The environmental determinants of pediatric embryonal tumors remain unclear. Because of the growing concern over the impact of exposures to traffic-related air pollution on pediatric cancer, we conducted a population-based study evaluating the impact of maternal residential proximity to major roadways on the risk of pediatric embryonal tumors in offspring. We identified children diagnosed with neuroblastoma, Wilms tumor, retinoblastoma, or hepatoblastoma at <5 years of age from the Texas Cancer Registry and selected unaffected controls from birth certificates. Two residential proximity measures were used: (1 distance to the nearest major roadway, and (2 within 500 m of a major roadway. Logistic regression was used to estimate the adjusted odds ratio (aOR and 95% confidence interval (CI for each proximity measure on pediatric embryonal tumors. The odds of an embryonal tumor were increased in children born to mothers living within 500 m of a major roadway (aOR = 1.24, 95% CI: 1.00, 1.54. This was consistent for most tumor subtypes, with the strongest associations observed for unilateral retinoblastoma (aOR = 2.57, 95% CI: 1.28, 5.15, for every kilometer closer the mother lived to the nearest major roadway. These findings contribute to the growing evidence that traffic-related air pollution may increase risk for certain pediatric tumors.

The role of ground-water travel time in suitability and licensing

International Nuclear Information System (INIS)

Murphy, M.R.

1995-01-01

This paper examines the Department of Energy (DOE) guidelines and Nuclear Regulatory Commission (NRC) licensing criteria pertaining to groundwater travel time, and their impact on obtaining a license for Yucca Mountain. DOE will be able to obtain a license for Yucca Mountain even if it is determined that there are some fast pathways along which groundwater travel time to the accessible environment is less than 1000 years. However, this will require DOE to gather and analyze a significant amount of firm data, rather than relying primarily on conservative assumptions and bounding calculations

Application of Google-based Data for Travel Time Analysis: Kaunas City Case Study

Directory of Open Access Journals (Sweden)

Vytautas Dumbliauskas

2017-12-01

Full Text Available Recently, new traffic data sources have emerged raising new challenges and opportunities when applying novel methodologies. The purpose of this research is to analyse car travel time data collected from smartphones by Google Company. Geographic information system (GIS tools and Python programming language were employed in this study to establish the initial framework as well as to automatically extract, analyse, and visualize data. The analysis resulted in the calculation of travel time fluctuation during the day, calculation of travel time variability and estimation of origin-destination (OD skim matrices. Furthermore, we accomplished the accessibility analysis and provided recommendations for further research.

RESEARCH ON REPAIR SUPPORT FOR FLOOR HEAVE IN SOFT ROCK ROADWAY

Institute of Scientific and Technical Information of China (English)

黄庆享; 杨忠民

1997-01-01

The run-around of Xiagou subincline bottom is a soft rock roadway, its floor has heaved over 1 m. In this paper, by electronic microscope scanning and X-ray diffraction analysis, the components of the soft rock are determined and the breaking mechanism of roadway is analyzed as well. Through finite element calculation and simulation model test, the reasonable repair support method is put forward.

Isocyanurate: safe substitute for urethane in polymer foams for mine roadways

Energy Technology Data Exchange (ETDEWEB)

Eisner, H.S.; Leger, J.P.

1989-02-01

Rigid polyurethane foam (PU) used for lining roadways or insulating cooling pipes has been involved in several large fires in South African mines. Polyisocyanurate foam when applied to continuous surfaces in a ventilated mine roadway and subjected to a sizeable flame, will ignite and rapidly propagate flame over its surface, with considerable evolution of carbon monoxide, in a manner substantially similar to polyurethane foam. 12 refs.

Time series analysis of travel trends in Vermont

Science.gov (United States)

Varna M. Ramaswamy; Walter F. Kuentzel

1995-01-01

Vermont's travel and tourism industry is not keeping pace with the nation-wide growth in the travel industry. While travel indicators such as domestic travel expenditures, tourism generated employment, payroll and tax receipts have been steadily increasing across the United States, these indicators in Vermont peaked in 1978 and have declined ever since. The state...

Time-use and well-being impacts of travel-to-work and travel-for-work

OpenAIRE

Wheatley, D; Bickerton, C

2016-01-01

This article contributes to understanding of the complex patterns of travel-to-work and travel-for-work which \\ud increasingly characterize highly skilled employment, using 2015 data from a UK Midlands study comprising an online survey and follow-up interviews. Travel-to-work essentially lengthens the working day, and is difficult to use productively, especially when commuting by car. Travel-for-work, by contrast, results in intense schedules \\ud especially when requiring overnight stays. Own...

Filtration effectiveness of HVAC systems at near-roadway schools.

Science.gov (United States)

McCarthy, M C; Ludwig, J F; Brown, S G; Vaughn, D L; Roberts, P T

2013-06-01

Concern for the exposure of children attending schools located near busy roadways to toxic, traffic-related air pollutants has raised questions regarding the environmental benefits of advanced heating, ventilation, and air-conditioning (HVAC) filtration systems for near-road pollution. Levels of black carbon and gaseous pollutants were measured at three indoor classroom sites and at seven outdoor monitoring sites at Las Vegas schools. Initial HVAC filtration systems effected a 31-66% reduction in black carbon particle concentrations inside three schools compared with ambient air concentrations. After improved filtration systems were installed, black carbon particle concentrations were reduced by 74-97% inside three classrooms relative to ambient air concentrations. Average black carbon particle concentrations inside the schools with improved filtration systems were lower than typical ambient Las Vegas concentrations by 49-96%. Gaseous pollutants were higher indoors than outdoors. The higher indoor concentrations most likely originated at least partially from indoor sources, which were not targeted as part of this intervention. Recent literature has demonstrated adverse health effects in subjects exposed to ambient air near major roadways. Current smart growth planning and infill development often require that buildings such as schools are built near major roadways. Improving the filtration systems of a school's HVAC system was shown to decrease children's exposure to near-roadway diesel particulate matter. However, reducing exposure to the gas-phase air toxics, which primarily originated from indoor sources, may require multiple filter passes on recirculated air. © 2012 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

Road Short-Term Travel Time Prediction Method Based on Flow Spatial Distribution and the Relations

Directory of Open Access Journals (Sweden)

Mingjun Deng

2016-01-01

Full Text Available There are many short-term road travel time forecasting studies based on time series, but indeed, road travel time not only relies on the historical travel time series, but also depends on the road and its adjacent sections history flow. However, few studies have considered that. This paper is based on the correlation of flow spatial distribution and the road travel time series, applying nearest neighbor and nonparametric regression method to build a forecasting model. In aspect of spatial nearest neighbor search, three different space distances are defined. In addition, two forecasting functions are introduced: one combines the forecasting value by mean weight and the other uses the reciprocal of nearest neighbors distance as combined weight. Three different distances are applied in nearest neighbor search, which apply to the two forecasting functions. For travel time series, the nearest neighbor and nonparametric regression are applied too. Then minimizing forecast error variance is utilized as an objective to establish the combination model. The empirical results show that the combination model can improve the forecast performance obviously. Besides, the experimental results of the evaluation for the computational complexity show that the proposed method can satisfy the real-time requirement.

Parsimonious wave-equation travel-time inversion for refraction waves

KAUST Repository

Fu, Lei; Hanafy, Sherif M.; Schuster, Gerard T.

2017-01-01

We present a parsimonious wave-equation travel-time inversion technique for refraction waves. A dense virtual refraction dataset can be generated from just two reciprocal shot gathers for the sources at the endpoints of the survey line, with N

Efficient evaluation of shortest travel-time path queries through spatial mashups

KAUST Repository

Zhang, Detian

2017-01-07

In the real world, the route/path with the shortest travel time in a road network is more meaningful than that with the shortest network distance for location-based services (LBS). However, not every LBS provider has adequate resources to compute/estimate travel time for routes by themselves. A cost-effective way for LBS providers to estimate travel time for routes is to issue external route requests to Web mapping services (e.g., Google Maps, Bing Maps, and MapQuest Maps). Due to the high cost of processing such external route requests and the usage limits of Web mapping services, we take the advantage of direction sharing, parallel requesting and waypoints supported by Web mapping services to reduce the number of external route requests and the query response time for shortest travel-time route queries in this paper. We first give the definition of sharing ability to reflect the possibility of sharing the direction information of a route with others, and find out the queries that their query routes are independent with each other for parallel processing. Then, we model the problem of selecting the optimal waypoints for an external route request as finding the longest simple path in a weighted complete digraph. As it is a MAX SNP-hard problem, we propose a greedy algorithm with performance guarantee to find the best set of waypoints in an external route request. We evaluate the performance of our approach using a real Web mapping service, a real road network, real and synthetic data sets. Experimental results show the efficiency, scalability, and applicability of our approach.

Efficient evaluation of shortest travel-time path queries through spatial mashups

KAUST Repository

Zhang, Detian; Chow, Chi-Yin; Liu, An; Zhang, Xiangliang; Ding, Qingzhu; Li, Qing

2017-01-01

In the real world, the route/path with the shortest travel time in a road network is more meaningful than that with the shortest network distance for location-based services (LBS). However, not every LBS provider has adequate resources to compute/estimate travel time for routes by themselves. A cost-effective way for LBS providers to estimate travel time for routes is to issue external route requests to Web mapping services (e.g., Google Maps, Bing Maps, and MapQuest Maps). Due to the high cost of processing such external route requests and the usage limits of Web mapping services, we take the advantage of direction sharing, parallel requesting and waypoints supported by Web mapping services to reduce the number of external route requests and the query response time for shortest travel-time route queries in this paper. We first give the definition of sharing ability to reflect the possibility of sharing the direction information of a route with others, and find out the queries that their query routes are independent with each other for parallel processing. Then, we model the problem of selecting the optimal waypoints for an external route request as finding the longest simple path in a weighted complete digraph. As it is a MAX SNP-hard problem, we propose a greedy algorithm with performance guarantee to find the best set of waypoints in an external route request. We evaluate the performance of our approach using a real Web mapping service, a real road network, real and synthetic data sets. Experimental results show the efficiency, scalability, and applicability of our approach.

A Kind of Urban Road Travel Time Forecasting Model with Loop Detectors

OpenAIRE

Zhu, Guangyu; Wang, Li; Zhang, Peng; Song, Kang

2016-01-01

Urban road travel time is an important parameter to reflect the traffic flow state. Besides, it is one of the important parameters for the traffic management department to formulate guidance measures, provide traffic information service, and improve the efficiency of the detectors group. Therefore, it is crucial to improve the forecast accuracy of travel time in traffic management practice. Based on the analysis of the change-point and the ARIMA model, this paper constructs a model for the ma...

Assessment of Smolt Condition for Travel Time Analysis Project, 1987-1997 Project Review.

Energy Technology Data Exchange (ETDEWEB)

Schrock, Robin M.; Hans, Karen M.; Beeman, John W. [US Geological Survey, Western Fisheries Research Center, Columbia River Research Laboratory, Cook, WA

1997-12-01

The assessment of Smolt Condition for Travel Time Analysis Project (Bonneville Power Administration Project 87-401) monitored attributes of salmonid smolt physiology in the Columbia and Snake River basins from 1987 to 1997, under the Northwest Power Planning Council Fish and Wildlife Program, in cooperation with the Smolt Monitoring Program of the Fish Passage Center. The primary goal of the project was to investigate the physiological development of juvenile salmonids related to migration rates. The assumption was made that the level of smolt development, interacting with environmental factos such as flow, would be reflected in travel times. The Fish Passage Center applied the physiological measurements of smolt condition to Water Budget management, to regulate flows so as to decrease travel time and increase survival.

Ground-water travel time calculations for the potential nuclear repository site at Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Younker, J.L.; Wilson, W.E.; Sinnock, S.

1986-01-01

In support of the US Department of Energy Nevada Nuclear Waste Storage Investigations Project, ground-water travel times were calculated for flow paths in both the saturated and unsaturated zones at Yucca Mountain, a potential site for a high-level radioactive waste repository in southern Nevada. The calculations were made through a combined effort by Science Applications International Corporation, Sandia National Laboratories, and the US Geological Survey. Travel times in the unsaturated zone were estimated by dividing the flow path length by the ground-water velocity, where velocities were obtained by dividing the vertical flux by the effective porosity of the rock types along assumed vertical flow paths. Saturated zone velocities were obtained by dividing the product of the bulk hydraulic conductivity and hydraulic gradient by the effective porosity. Total travel time over an EPA-established 5-km flow path was then calculated to be the sum of the travel times in the two parts of the flow path. Estimates of ground water fluxes and travel times are critical for evaluating the favorability of the Yucca Mountain site because they provide the basis for estimating the potential for radionuclides to reach the accessible environment within certain time limits

Preliminary study of visual perspective in mental time travel in schizophrenia.

Science.gov (United States)

Wang, Ya; Wang, Yi; Zhao, Qing; Cui, Ji-Fang; Hong, Xiao-Hong; Chan, Raymond Ck

2017-10-01

This study explored specificity and visual perspective of mental time travel in schizophrenia. Fifteen patients with schizophrenia and 18 controls were recruited. Participants were asked to recall or imagine specific events according to cue words. Results showed that schizophrenia patients generated fewer specific events than controls, the recalled events were more specific than imagined events. Schizophrenia adopted less field perspective and more observer perspective than controls. These results suggested that patients with schizophrenia were impaired in mental time travel both in specificity and visual perspective. Further studies are needed to identify the underlying mechanisms. Copyright © 2017 Elsevier B.V. All rights reserved.

Mental time travel to the future might be reduced in sleep.

Science.gov (United States)

Speth, Jana; Schloerscheidt, Astrid M; Speth, Clemens

2017-02-01

We present a quantitative study of mental time travel to the future in sleep. Three independent, blind judges analysed a total of 563 physiology-monitored mentation reports from sleep onset, REM sleep, non-REM sleep, and waking. The linguistic tool for the mentation report analysis is based on established grammatical and cognitive-semantic theories and has been validated in previous studies. Our data indicate that REM and non-REM sleep must be characterized by a reduction in mental time travel to the future, which would support earlier physiological evidence at the level of brain function. Copyright © 2016 Elsevier Inc. All rights reserved.

49 CFR 214.509 - Required visual illumination and reflective devices for new on-track roadway maintenance machines.

Science.gov (United States)

2010-10-01

... devices for new on-track roadway maintenance machines. 214.509 Section 214.509 Transportation Other... TRANSPORTATION RAILROAD WORKPLACE SAFETY On-Track Roadway Maintenance Machines and Hi-Rail Vehicles § 214.509 Required visual illumination and reflective devices for new on-track roadway maintenance machines. Each new...

Deformation and Failure Mechanism of Roadway Sensitive to Stress Disturbance and Its Zonal Support Technology

Directory of Open Access Journals (Sweden)

Qiangling Yao

2016-01-01

Full Text Available The 6163 haulage roadway in the Qidong coal mine passes through a fault zone, which causes severe deformation in the surrounding rock, requiring repeated roadway repairs. Based on geological features in the fault area, we analyze the factors affecting roadway deformation and failure and propose the concept of roadway sensitive to stress disturbance (RSSD. We investigate the deformation and failure mechanism of the surrounding rocks of RSSD using field monitoring, theoretical analysis, and numerical simulation. The deformation of the surrounding rocks involves dilatation of shallow rocks and separation of deep rocks. Horizontal and longitudinal fissures evolve to bed separation and fracture zones; alternatively, fissures can evolve into fracture zones with new fissures extending to deeper rock. The fault affects the stress field of the surrounding rock to ~27 m radius. Its maximum impact is on the vertical stress of the rib rock mass and its minimum impact is on the vertical stress of the floor rock mass. Based on our results, we propose a zonal support system for a roadway passing through a fault. Engineering practice shows that the deformation of the surrounding rocks of the roadway can be effectively controlled to ensure normal and safe production in the mine.

Mobile sources of polycyclic aromatic hydrocarbons (PAH) and nitro-PAH: Results of samples collected in a roadway tunnel

International Nuclear Information System (INIS)

Benner, B.A. Jr.; Gordon, G.E.; Wise, S.A.

1987-01-01

A recent review article emphasized the need for further characterizations of the carbonaceous fraction of mobile source emissions, particularly with the impending removal of lead alkyl octane boosters and bromine-containing lead scavengers from regular leaded gasolines. The lead and bromine emitted from the combustion of these fuels have been used as tracers of mobile source emissions for a number of years. Single vehicle emission studies have shed light on the relationship between engine operating parameters and the chemical characteristics of the emissions but they are not suitable for use in source apportionment studies which require emission data from a large number of different vehicles. Air particulate samples collected near a busy highway or in a roadway tunnel would be more appropriate for use in estimating the mobile source contribution of organic compounds to a region. Suspended particle samples collected in a heavily-travelled roadway tunnel (Baltimore Harbor Tunnel, Baltimore, Maryland) were characterized for polycyclic aromatic hydrocarbons (PAH) and some nitro-PAH by gas and liquid chromatographic techniques. These samples included those collected on Teflon filters and on glass fiber filters for investigating any differences in samples collected on an inert (Teflon) and more reactive (glass-fiber) medium. All samples collected on Teflon were backed-up with polyurethane foam plugs (PUF) which trapped any inherent vapor-phase PAH as well as any compounds ''blown-off'' the particles during collection

Space-time accessibility under conditions of uncertain travel times: theory and numerical simulations

NARCIS (Netherlands)

Ettema, D.F.; Timmermans, H.J.P.

2007-01-01

Recently, several accessibility measures using the space–time prism concept have been suggested in the literature. These measures fail to take into account (i) the ability of individuals to adjust their activity–travel patterns in coping with constrained choice sets, (ii) uncertainty in the

Effect of Automobile Travel Time Between Patients' Homes and Ophthalmologists' Offices on Screening for Diabetic Retinopathy.

Science.gov (United States)

Macon, Céline; Carrier, Hélène; Janczewski, Aurélie; Verger, Pierre; Casanova, Ludovic

2018-01-01

The accessibility of ophthalmologists appears to influence the quality of screening for diabetic retinopathy (DR). The principal objective of this study was to analyze the effect of automobile travel time to the closest ophthalmologist on the time to DR screening. This historical cohort study used reimbursement databases from the principal national health insurance fund. Patients were included if they had been reimbursed at least thrice for oral antidiabetic medications in the 12 months before the study start date. Patients were followed up from January 1, 2008, for 4 years. The expected event was a DR screening by an ocular fundus examination. The automobile travel time to the nearest ophthalmologist was calculated by the distance between communes, estimated by appropriate software. A Kaplan-Meier curve and a multivariate Cox model were used to model the effect of travel time on the time until DR screening. A sensitivity analysis of travel time described the results of the Cox model. At the start of 2008, 6,573 patients living in 328 different municipalities were included. The multivariate model found that patients living 60 min or more away from an ophthalmologist had a lower instantaneous probability of DR screening than those living travel time. Increased automobile travel time for patients with diabetes to the nearest ophthalmologist was associated with a longer time to DR screening.

Characterizing Global Flood Wave Travel Times to Optimize the Utility of Near Real-Time Satellite Remote Sensing Products

Science.gov (United States)

Allen, G. H.; David, C. H.; Andreadis, K. M.; Emery, C. M.; Famiglietti, J. S.

2017-12-01

Earth observing satellites provide valuable near real-time (NRT) information about flood occurrence and magnitude worldwide. This NRT information can be used in early flood warning systems and other flood management applications to save lives and mitigate flood damage. However, these NRT products are only useful to early flood warning systems if they are quickly made available, with sufficient time for flood mitigation actions to be implemented. More specifically, NRT data latency, or the time period between the satellite observation and when the user has access to the information, must be less than the time it takes a flood to travel from the flood observation location to a given downstream point of interest. Yet the paradigm that "lower latency is always better" may not necessarily hold true in river systems due to tradeoffs between data latency and data quality. Further, the existence of statistical breaks in the global distribution of flood wave travel time (i.e. a jagged statistical distribution) would represent preferable latencies for river-observation NRT remote sensing products. Here we present a global analysis of flood wave velocity (i.e. flow celerity) and travel time. We apply a simple kinematic wave model to a global hydrography dataset and calculate flow wave celerity and travel time during bankfull flow conditions. Bankfull flow corresponds to the condition of maximum celerity and thus we present the "worst-case scenario" minimum flow wave travel time. We conduct a similar analysis with respect to the time it takes flood waves to reach the next downstream city, as well as the next downstream reservoir. Finally, we conduct these same analyses, but with regards to the technical capabilities of the planned Surface Water and Ocean Topography (SWOT) satellite mission, which is anticipated to provide waterbody elevation and extent measurements at an unprecedented spatial and temporal resolution. We validate these results with discharge records from paired

The A-priori Traveling Salesman Problem with Time Windows

DEFF Research Database (Denmark)

Larsen, Allan; Madsen, Oli B.G.; Solomon, Marius M.

2004-01-01

seek to minimize lateness and examine the impact of this criterion choice on the distance traveled. Our focus on lateness is motivated by the problem faced by overnight mail service providers. We propose a real-time solution method that requires the vehicle, when idle, to wait at the current customer......In this paper we examine the traveling saleman problem with time windows for various degrees of dynamism. In contrast to the static problem, where the dispatcher can plan ahead, in the dynamic version, part or all of the necessary information becomes available only during the day of operation. We...... randomly generated data and on a real-world case study indicate that all policies proved capable of significantly reducing lateness. Our results also show that this can be accomplished with only small distance increases. The basic policy outperformed the other methods primarily when lateness and distance...

Travel-time source-specific station correction improves location accuracy

Science.gov (United States)

Giuntini, Alessandra; Materni, Valerio; Chiappini, Stefano; Carluccio, Roberto; Console, Rodolfo; Chiappini, Massimo

2013-04-01

Accurate earthquake locations are crucial for investigating seismogenic processes, as well as for applications like verifying compliance to the Comprehensive Test Ban Treaty (CTBT). Earthquake location accuracy is related to the degree of knowledge about the 3-D structure of seismic wave velocity in the Earth. It is well known that modeling errors of calculated travel times may have the effect of shifting the computed epicenters far from the real locations by a distance even larger than the size of the statistical error ellipses, regardless of the accuracy in picking seismic phase arrivals. The consequences of large mislocations of seismic events in the context of the CTBT verification is particularly critical in order to trigger a possible On Site Inspection (OSI). In fact, the Treaty establishes that an OSI area cannot be larger than 1000 km2, and its larger linear dimension cannot be larger than 50 km. Moreover, depth accuracy is crucial for the application of the depth event screening criterion. In the present study, we develop a method of source-specific travel times corrections based on a set of well located events recorded by dense national seismic networks in seismically active regions. The applications concern seismic sequences recorded in Japan, Iran and Italy. We show that mislocations of the order of 10-20 km affecting the epicenters, as well as larger mislocations in hypocentral depths, calculated from a global seismic network and using the standard IASPEI91 travel times can be effectively removed by applying source-specific station corrections.

Integrating stochastic time-dependent travel speed in solution methods for the dynamic dial-a-ride problem.

Science.gov (United States)

Schilde, M; Doerner, K F; Hartl, R F

2014-10-01

In urban areas, logistic transportation operations often run into problems because travel speeds change, depending on the current traffic situation. If not accounted for, time-dependent and stochastic travel speeds frequently lead to missed time windows and thus poorer service. Especially in the case of passenger transportation, it often leads to excessive passenger ride times as well. Therefore, time-dependent and stochastic influences on travel speeds are relevant for finding feasible and reliable solutions. This study considers the effect of exploiting statistical information available about historical accidents, using stochastic solution approaches for the dynamic dial-a-ride problem (dynamic DARP). The authors propose two pairs of metaheuristic solution approaches, each consisting of a deterministic method (average time-dependent travel speeds for planning) and its corresponding stochastic version (exploiting stochastic information while planning). The results, using test instances with up to 762 requests based on a real-world road network, show that in certain conditions, exploiting stochastic information about travel speeds leads to significant improvements over deterministic approaches.

Travelling wave solutions for some time-delayed equations through factorizations

International Nuclear Information System (INIS)

Fahmy, E.S.

2008-01-01

In this work, we use factorization method to find explicit particular travelling wave solutions for the following important nonlinear second-order partial differential equations: The generalized time-delayed Burgers-Huxley, time-delayed convective Fishers, and the generalized time-delayed Burgers-Fisher. Using the particular solutions for these equations we find the general solutions, two-parameter solution, as special cases

Innovative roadway light source and dye combinations to improve visibility and reduce environmental impacts.

Science.gov (United States)

2013-04-01

Sky glow light pollution is caused largely by reflected light off of roadway and other surfaces. The : authors investigated the feasibility of a system consisting of a specialized LED streetlight and a dyebased : roadway surface coating that would re...

Distribution characteristics of radon and its progeny in blind roadway with forced ventilation

International Nuclear Information System (INIS)

Ye Yongjun; Zhou Xinghuo; Li Xiangyang; Zhong Yongming; Liu Dong; Ding Dexin

2012-01-01

The blind roadway is not only the important workplaces, but also is important site of radon and its progeny generating and gathering, it is an important guiding significance for ventilation protection design to study distribution characteristics of radon and its progeny in blind roadway. Therefore, at first, the paper expounded the mathematical relationship between radon activity concentration with alpha potential concentration of radon progeny. Then, analyzed the sources of radon and its progeny, and established mathematical calculation model of Distribution characteristics of radon and its progeny in blind roadway with forced ventilation, respectively. Finally, using mathematical calculation models to analyze the influence law of multiple factors. (authors)

Pn seismic wave travel time at the Semipalatinsk Test Site - Borovoe seismic station trace

International Nuclear Information System (INIS)

An, V.A.; Kaazik, P.B.; Ovchinnikov, V.M.

2001-01-01

This paper preparation involved 160 explosions at the Degelen Site conducted in 1961-1989 and 89 explosions at the Balapan Site conducted in 1968-1989. Pn wave travel time was tied to the sea level in accordance with velocity characteristics of the explosion hypocenter medium; and to average epicentral distance for every site basing on their local travel time curves of Pn wave relative to Borovoe station. Maximum amplitude of mean-year travel times variations is 0.3-0.5 s as at the Nevada Test Site - Borovoe trace and Mirniy (Antarctica). However, the linear trend in contrast to previous traces has negative sign (0.08 s for Degelen and 0.1 s for Balapan). Thus, Pn wave velocity increases with calendar time. (author)

Role of Travel Time Information on Day-to-Day Route Choice Behavior Based on Real-World Experiments

NARCIS (Netherlands)

van Essen, Mariska; Thomas, Tom; Chorus, Caspar; van Berkum, Eric C.

2016-01-01

It is widely believed that travel time information leads to reductions in traffic congestion and thereby improves network efficiency. An important research topic within travel behavior research is therefore how car drivers choose their routes, specifically when they receive travel time information.

Impact of a University-Based Outpatient Telemedicine Program on Time Savings, Travel Costs, and Environmental Pollutants.

Science.gov (United States)

Dullet, Navjit W; Geraghty, Estella M; Kaufman, Taylor; Kissee, Jamie L; King, Jesse; Dharmar, Madan; Smith, Anthony C; Marcin, James P

2017-04-01

The objective of this study was to estimate travel-related and environmental savings resulting from the use of telemedicine for outpatient specialty consultations with a university telemedicine program. The study was designed to retrospectively analyze the telemedicine consultation database at the University of California Davis Health System (UCDHS) between July 1996 and December 2013. Travel distances and travel times were calculated between the patient home, the telemedicine clinic, and the UCDHS in-person clinic. Travel cost savings and environmental impact were calculated by determining differences in mileage reimbursement rate and emissions between those incurred in attending telemedicine appointments and those that would have been incurred if a visit to the hub site had been necessary. There were 19,246 consultations identified among 11,281 unique patients. Telemedicine visits resulted in a total travel distance savings of 5,345,602 miles, a total travel time savings of 4,708,891 minutes or 8.96 years, and a total direct travel cost savings of $2,882,056. The mean per-consultation round-trip distance savings were 278 miles, average travel time savings were 245 minutes, and average cost savings were $156. Telemedicine consultations resulted in a total emissions savings of 1969 metric tons of CO 2 , 50 metric tons of CO, 3.7 metric tons of NO x , and 5.5 metric tons of volatile organic compounds. This study demonstrates the positive impact of a health system's outpatient telemedicine program on patient travel time, patient travel costs, and environmental pollutants. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Seismic travel-time tomography for detailed global mantle structure

NARCIS (Netherlands)

Bijwaard, H.

1999-01-01

The object of this thesis is to use travel-time tomography to focus and enhance the existing global image of the Earth's mantle and crust. This image is still rather blurred with respect to the considerably sharper pictures commonly obtained in regional studies. The improvement is basically

Use of reflective surfaces on roadway embankment

DEFF Research Database (Denmark)

Jørgensen, Anders Stuhr; Doré, Guy

2007-01-01

adherence characteristics for roadway use. In Kangerlussuaq Airport, western Greenland, ground-penetrating radar (GPR) has been used to compare the variation of the frost table underneath a normal black asphalt surface and a more reflective surface (white paint). The GPR results have shown a clear...

Between-mode-differences in the value of travel time: Self-selection or strategic behaviour?

DEFF Research Database (Denmark)

Fosgerau, Mogens; Hjorth, Katrine; Lyk-Jensen, Stéphanie Vincent

2010-01-01

Using stated preference survey data, we measure the value of travel time for several transport modes. We find, like many before us, that the value of travel time varies across modes in the opposite direction of what would be the consequence of differences in comfort. We examine three candidate...... causes for the observed differences: Comfort effects, self-selection and strategic behaviour of respondents. Using experiments with both the current and an alternative mode we find that the differences in the value of travel time are consistent with self-selection and comfort effects. Moreover......, respondents having bus as the current or the alternative mode seem not to value comfort differently across modes. Strategic behaviour seems to play no role....

Congestion relief by travel time minimization in near real time : Detroit area I-75 corridor study.

Science.gov (United States)

2008-12-01

"This document summarizes the activities concerning the project: Congestion Relief by : Travel Time Minimization in Near Real Time -- Detroit Area I-75 Corridor Study since : the inception of the project (Nov. 22, 2006 through September 30, 2008). : ...

Negotiating on location, timing, duration, and participant in agent-mediated joint activity-travel scheduling

Science.gov (United States)

Ma, Huiye; Ronald, Nicole; Arentze, Theo A.; Timmermans, Harry J. P.

2013-10-01

Agent-based simulation has become an important modeling approach in activity-travel analysis. Social activities account for a large amount of travel and have an important effect on activity-travel scheduling. Participants in joint activities usually have various options regarding location, participants, and timing and take different approaches to make their decisions. In this context, joint activity participation requires negotiation among agents involved, so that conflicts among the agents can be addressed. Existing mechanisms do not fully provide a solution when utility functions of agents are nonlinear and non-monotonic. Considering activity-travel scheduling in time and space as an application, we propose a novel negotiation approach, which takes into account these properties, such as continuous and discrete issues, and nonlinear and non-monotonic utility functions, by defining a concession strategy and a search mechanism. The results of experiments show that agents having these properties can negotiate efficiently. Furthermore, the negotiation procedure affects individuals’ choices of location, timing, duration, and participants.

A methodology for rearranging transit stops for enhancing transit users generalized travel time

Directory of Open Access Journals (Sweden)

Mohammad Nurul Hassan

2017-02-01

Full Text Available This study develops a methodology to consolidate transit stops. It develops a mathematical model and a program which takes stop consolidation decision(s according to users generalized travel time savings and desired accessibility. The model iterates until the users generalized travel time savings are maximized. The study tests this mathematical model in different hypothetical scenarios. Six factors (distance between stops, passenger activity, average cruising speed, maximum walking distance, service frequency, and percentage of decreased passengers with multiple levels were set to build the scenarios. Three responses (percentage of consolidated stops, percentages of travel time and operating time savings were observed. The findings showed that the distance between the stops the passenger activity, and the probable demand change (or the percentage of decreased passengers are the most influential factors. The frequency of service was found to be influential as well. The average cruising speed has very little influence on the response variables. Finally, the model is tested on two routes (route 900 and 930 of Al Ain City public bus service. It shows that 22 and 32 out of 98 and 126 stops can be consolidated in route 900 and 930 respectively. This can save considerable amounts of users travel and operating times. In monetary values, the savings are about $329,827 and $491,094 per year for routes 900 and 930, respectively.

Estimating Travel Time in Bank Filtration Systems from a Numerical Model Based on DTS Measurements.

Science.gov (United States)

des Tombe, Bas F; Bakker, Mark; Schaars, Frans; van der Made, Kees-Jan

2018-03-01

An approach is presented to determine the seasonal variations in travel time in a bank filtration system using a passive heat tracer test. The temperature in the aquifer varies seasonally because of temperature variations of the infiltrating surface water and at the soil surface. Temperature was measured with distributed temperature sensing along fiber optic cables that were inserted vertically into the aquifer with direct push equipment. The approach was applied to a bank filtration system consisting of a sequence of alternating, elongated recharge basins and rows of recovery wells. A SEAWAT model was developed to simulate coupled flow and heat transport. The model of a two-dimensional vertical cross section is able to simulate the temperature of the water at the well and the measured vertical temperature profiles reasonably well. MODPATH was used to compute flowpaths and the travel time distribution. At the study site, temporal variation of the pumping discharge was the dominant factor influencing the travel time distribution. For an equivalent system with a constant pumping rate, variations in the travel time distribution are caused by variations in the temperature-dependent viscosity. As a result, travel times increase in the winter, when a larger fraction of the water travels through the warmer, lower part of the aquifer, and decrease in the summer, when the upper part of the aquifer is warmer. © 2017 The Authors. Groundwater published by Wiley Periodicals, Inc. on behalf of National Ground Water Association.

Seismic travel-time tomography for detailed global mantle structure

NARCIS (Netherlands)

Bijwaard, H.

1999-01-01

The object of this thesis is to use travel-time tomography to focus and enhance the existing global image of the Earth's mantle and crust. This image is still rather blurred with respect to the considerably sharper pictures commonly obtained in regional studies. The improvement is basically obtained

Mental time travel : A conceptual overview of social psychological perspectives on a fundamental human capacity

NARCIS (Netherlands)

Epstude, K.; Peetz, J.

Humans have the unique capacity to mentally travel through time, that is, to reflect on the past, anticipate the future, and construct alternate realities in their minds. The ability to mentally travel through time affects a variety of social psychological topics. Representations of events can

Measuring the impact of efficient household travel decisions on potential travel time savings and accessibility gains

Energy Technology Data Exchange (ETDEWEB)

Recker, W.W.; McNally, M.G. [University of California, Irvine (United States). Institute of Transportation Studies, Department of Civil and Environmental Engineering; Chen, C. [Ming-Chuan University, Taiwan (China). Department of Tourism Industry

2001-07-01

Using the conceptual framework of time-space geography, this paper incorporates both spatio-temporal constraints and household interaction effects into a meaningful measure of the potential of a household to interact with the built environment. Within this context, personal accessibility is described as a measure of the potential ability of individuals within a household not only to reach activity opportunities, but to do so with sufficient time available for participation in those activities, subject to the spatio-temporal constraints imposed by their daily obligations and transportation supply environment. The incorporation of activity-based concepts in the measurement of accessibility as a product of travel time savings not only explicitly acknowledges a temporal dimension in assessing the potential for spatial interaction but also expands the applicability of accessibility consideration to such real-world policy options as the promotion of ride-sharing and trip chaining behaviors. An empirical application of the model system provides an indication of the potential of activity-based modeling approaches to assess the bounds on achievable improvements in accessibility and travel time based on daily household activity patterns. It also provides an assessment of roles for trip chaining and ride-sharing as potentially effective methods to facilitate transportation policy objectives. (author)

Accessing doctors at times of need-measuring the distance tolerance of rural residents for health-related travel.

Science.gov (United States)

McGrail, Matthew Richard; Humphreys, John Stirling; Ward, Bernadette

2015-05-29

Poor access to doctors at times of need remains a significant impediment to achieving good health for many rural residents. The two-step floating catchment area (2SFCA) method has emerged as a key tool for measuring healthcare access in rural areas. However, the choice of catchment size, a key component of the 2SFCA method, is problematic because little is known about the distance tolerance of rural residents for health-related travel. Our study sought new evidence to test the hypothesis that residents of sparsely settled rural areas are prepared to travel further than residents of closely settled rural areas when accessing primary health care at times of need. A questionnaire survey of residents in five small rural communities of Victoria and New South Wales in Australia was used. The two outcome measures were current travel time to visit their usual doctor and maximum time prepared to travel to visit a doctor, both for non-emergency care. Kaplan-Meier charts were used to compare the association between increased distance and decreased travel propensity for closely-settled and sparsely-settled areas, and ordinal multivariate regression models tested significance after controlling for health-related travel moderating factors and town clustering. A total of 1079 questionnaires were completed with 363 from residents in closely-settled locations and 716 from residents in sparsely-settled areas. Residents of sparsely-settled communities travel, on average, 10 min further than residents of closely-settled communities (26.3 vs 16.9 min, p time prepared to travel (54.1 vs 31.9 min, p time remained significant after controlling for demographic and other constraints to access, such as transport availability or difficulties getting doctor appointments, as well as after controlling for town clustering and current travel times. Improved geographical access remains a key issue underpinning health policies designed to improve the provision of rural primary health care

Travelling waves in expanding spatially homogeneous space–times

International Nuclear Information System (INIS)

Alekseev, George

2015-01-01

Some classes of the so-called ‘travelling wave’ solutions of Einstein and Einstein–Maxwell equations in general relativity and of dynamical equations for massless bosonic fields in string gravity in four and higher dimensions are presented. Similarly to the well known plane-fronted waves with parallel rays (pp-waves), these travelling wave solutions may depend on arbitrary functions of a null coordinate which determine the arbitrary profiles and polarizations of the waves. However, in contrast with pp-waves, these waves do not admit the null Killing vector fields and can exist in some curved (expanding and spatially homogeneous) background space–times, where these waves propagate in certain directions without any scattering. Mathematically, some of these classes of solutions arise as the fixed points of Kramer–Neugebauer transformations for hyperbolic integrable reductions of the above mentioned field equations or, in other cases, after imposing the ansatz that these waves do not change the part of the spatial metric transverse to the direction of wave propagation. It is worth noting that the strikingly simple forms of all the solutions presented prospectively make possible the consideration of the nonlinear interaction of these waves with the background curvature and singularities, as well as the collision of such wave pulses with solitons or with each other in the backgrounds where such travelling waves may exist. (paper)

Groundwater travel time uncertainty analysis. Sensitivity of results to model geometry, and correlations and cross correlations among input parameters

International Nuclear Information System (INIS)

Clifton, P.M.

1985-03-01

This study examines the sensitivity of the travel time distribution predicted by a reference case model to (1) scale of representation of the model parameters, (2) size of the model domain, (3) correlation range of log-transmissivity, and (4) cross correlations between transmissivity and effective thickness. The basis for the reference model is the preliminary stochastic travel time model previously documented by the Basalt Waste Isolation Project. Results of this study show the following. The variability of the predicted travel times can be adequately represented when the ratio between the size of the zones used to represent the model parameters and the log-transmissivity correlation range is less than about one-fifth. The size of the model domain and the types of boundary conditions can have a strong impact on the distribution of travel times. Longer log-transmissivity correlation ranges cause larger variability in the predicted travel times. Positive cross correlation between transmissivity and effective thickness causes a decrease in the travel time variability. These results demonstrate the need for a sound conceptual model prior to conducting a stochastic travel time analysis

Developing corridor-level truck travel time estimates and other freight performance measures from archived ITS data.

Science.gov (United States)

2009-08-01

The objectives of this research were to retrospectively study the feasibility for using truck transponder data to produce freight corridor performance measures (travel times) and real-time traveler information. To support this analysis, weigh-in-moti...

Driving the 14 m/sup 2/ roadway at Samuno colliery using manpower from Polio mine

Energy Technology Data Exchange (ETDEWEB)

1981-03-01

At Samuno colliery, which forms part of the Hunosa national mining enterprises, it took 5 hours 30 minutes in total to drive the 14 m/sup 2/ by 3 m (or 42 m/sup 3/) roadway. This time included loading out operations, drilling of shotholes and support setting operations.

Asset Management of Roadway Signs Through Advanced Technology

Science.gov (United States)

2003-06-01

This research project aims to ease the process of Roadway Sign asset management. The project utilized handheld computer and global positioning system (GPS) technology to capture sign location data along with a timestamp. This data collection effort w...

Modeling Travel Time Reliability of Road Network Considering Connected Vehicle Guidance Characteristics Indexes

Directory of Open Access Journals (Sweden)

Jiangfeng Wang

2017-01-01

Full Text Available Travel time reliability (TTR is one of the important indexes for effectively evaluating the performance of road network, and TTR can effectively be improved using the real-time traffic guidance information. Compared with traditional traffic guidance, connected vehicle (CV guidance can provide travelers with more timely and accurate travel information, which can further improve the travel efficiency of road network. Five CV characteristics indexes are selected as explanatory variables including the Congestion Level (CL, Penetration Rate (PR, Compliance Rate (CR, release Delay Time (DT, and Following Rate (FR. Based on the five explanatory variables, a TTR model is proposed using the multilogistic regression method, and the prediction accuracy and the impact of characteristics indexes on TTR are analyzed using a CV guidance scenario. The simulation results indicate that 80% of the RMSE is concentrated within the interval of 0 to 0.0412. The correlation analysis of characteristics indexes shows that the influence of CL, PR, CR, and DT on the TTR is significant. PR and CR have a positive effect on TTR, and the average improvement rate is about 77.03% and 73.20% with the increase of PR and CR, respectively, while CL and DT have a negative effect on TTR, and TTR decreases by 31.21% with the increase of DT from 0 to 180 s.

Reliable Rescue Routing Optimization for Urban Emergency Logistics under Travel Time Uncertainty

Directory of Open Access Journals (Sweden)

Qiuping Li

2018-02-01

Full Text Available The reliability of rescue routes is critical for urban emergency logistics during disasters. However, studies on reliable rescue routing under stochastic networks are still rare. This paper proposes a multiobjective rescue routing model for urban emergency logistics under travel time reliability. A hybrid metaheuristic integrating ant colony optimization (ACO and tabu search (TS was designed to solve the model. An experiment optimizing rescue routing plans under a real urban storm event, was carried out to validate the proposed model. The experimental results showed how our approach can improve rescue efficiency with high travel time reliability.

A method for generating an illusion of backwards time travel using immersive virtual reality-an exploratory study.

Science.gov (United States)

Friedman, Doron; Pizarro, Rodrigo; Or-Berkers, Keren; Neyret, Solène; Pan, Xueni; Slater, Mel

2014-01-01

We introduce a new method, based on immersive virtual reality (IVR), to give people the illusion of having traveled backwards through time to relive a sequence of events in which they can intervene and change history. The participant had played an important part in events with a tragic outcome-deaths of strangers-by having to choose between saving 5 people or 1. We consider whether the ability to go back through time, and intervene, to possibly avoid all deaths, has an impact on how the participant views such moral dilemmas, and also whether this experience leads to a re-evaluation of past unfortunate events in their own lives. We carried out an exploratory study where in the "Time Travel" condition 16 participants relived these events three times, seeing incarnations of their past selves carrying out the actions that they had previously carried out. In a "Repetition" condition another 16 participants replayed the same situation three times, without any notion of time travel. Our results suggest that those in the Time Travel condition did achieve an illusion of "time travel" provided that they also experienced an illusion of presence in the virtual environment, body ownership, and agency over the virtual body that substituted their own. Time travel produced an increase in guilt feelings about the events that had occurred, and an increase in support of utilitarian behavior as the solution to the moral dilemma. Time travel also produced an increase in implicit morality as judged by an implicit association test. The time travel illusion was associated with a reduction of regret associated with bad decisions in their own lives. The results show that when participants have a third action that they can take to solve the moral dilemma (that does not immediately involve choosing between the 1 and the 5) then they tend to take this option, even though it is useless in solving the dilemma, and actually results in the deaths of a greater number.

Completion of construction and installation of travel time signs on I-35 in Austin : project summary.

Science.gov (United States)

2015-08-31

Drivers desire real-time information when : traveling in order to make route choice : decisions. One type of information that can be : provided is current (dynamic) travel times on : two possible routes that serve a common : destination. In this way,...

Making Decisions with the Future in Mind: Developmental and Comparative Identification of Mental Time Travel

Science.gov (United States)

Suddendorf, T.; Busby, J.

2005-01-01

Mechanisms that produce behavior which increase future survival chances provide an adaptive advantage. The flexibility of human behavior is at least partly the result of one such mechanism, our ability to travel mentally in time and entertain potential future scenarios. We can study mental time travel in children using language. Current results…

Implementation and Comparison of Acoustic Travel-Time Measurement Procedures for the Solar Dynamics Observatory-Helioseismic and Magnetic Imager Time-Distance Helioseismology Pipeline

Science.gov (United States)

Couvidat, S.; Zhao, J.; Birch, A. C.; Kosovichev, A. G.; Duvall, Thomas L., Jr.; Parchevsky, K.; Scherrer, P. H.

2010-01-01

The Helioseismic and Magnetic Imager (HMI) instrument onboard the Solar Dynamics Observatory (SDO) satellite is designed to produce high-resolution Doppler-velocity maps of oscillations at the solar surface with high temporal cadence. To take advantage of these high-quality oscillation data, a time - distance helioseismology pipeline (Zhao et al., Solar Phys. submitted, 2010) has been implemented at the Joint Science Operations Center (JSOC) at Stanford University. The aim of this pipeline is to generate maps of acoustic travel times from oscillations on the solar surface, and to infer subsurface 3D flow velocities and sound-speed perturbations. The wave travel times are measured from cross-covariances of the observed solar oscillation signals. For implementation into the pipeline we have investigated three different travel-time definitions developed in time - distance helioseismology: a Gabor-wavelet fitting (Kosovichev and Duvall, SCORE'96: Solar Convection and Oscillations and Their Relationship, ASSL, Dordrecht, 241, 1997), a minimization relative to a reference cross-covariance function (Gizon and Birch, Astrophys. J. 571, 966, 2002), and a linearized version of the minimization method (Gizon and Birch, Astrophys. J. 614, 472, 2004). Using Doppler-velocity data from the Michelson Doppler Imager (MDI) instrument onboard SOHO, we tested and compared these definitions for the mean and difference traveltime perturbations measured from reciprocal signals. Although all three procedures return similar travel times in a quiet-Sun region, the method of Gizon and Birch (Astrophys. J. 614, 472, 2004) gives travel times that are significantly different from the others in a magnetic (active) region. Thus, for the pipeline implementation we chose the procedures of Kosovichev and Duvall (SCORE'96: Solar Convection and Oscillations and Their Relationship, ASSL, Dordrecht, 241, 1997) and Gizon and Birch (Astrophys. J. 571, 966, 2002). We investigated the relationships among

A simple data fusion method for instantaneous travel time estimation

NARCIS (Netherlands)

Do, Michael; Pueboobpaphan, R.; Miska, Marc; Kuwahara, Masao; van Arem, Bart; Viegas, J.M.; Macario, R.

2010-01-01

Travel time is one of the most understandable parameters to describe traffic condition and an important input to many intelligent transportation systems applications. Direct measurement from Electronic Toll Collection (ETC) system is promising but the data arrives too late, only after the vehicles

Pre-Travel Medical Preparation of Business and Occupational Travelers

Science.gov (United States)

Khan, Nomana M.; Jentes, Emily S.; Brown, Clive; Han, Pauline; Rao, Sowmya R.; Kozarsky, Phyllis; Hagmann, Stefan H.F.; LaRocque, Regina C.; Ryan, Edward T.

2016-01-01

Objectives: The aim of the study was to understand more about pre-travel preparations and itineraries of business and occupational travelers. Methods: De-identified data from 18 Global TravEpiNet clinics from January 2009 to December 2012 were analyzed. Results: Of 23,534 travelers, 61% were non-occupational and 39% occupational. Business travelers were more likely to be men, had short times to departure and shorter trip durations, and commonly refused influenza, meningococcal, and hepatitis B vaccines. Most business travelers indicated that employers suggested the pre-travel health consultation, whereas non-occupational travelers sought consultations because of travel health concerns. Conclusions: Sub-groups of occupational travelers have characteristic profiles, with business travelers being particularly distinct. Employers play a role in encouraging business travelers to seek pre-travel consultations. Such consultations, even if scheduled immediately before travel, can identify vaccination gaps and increase coverage. PMID:26479857

Deciphering relationships between in-stream travel times, nutrient concentrations, and uptake through analysis of hysteretic and non-hysteretic kinetic behavior

Science.gov (United States)

Covino, T. P.; Bowden, W. B.; Gooseff, M. N.; Wollheim, W. M.; McGlynn, B. L.; Whittinghill, K. A.; Wlostowski, A. N.; Herstand, M. R.

2012-12-01

Understanding the relationship between solute travel time, concentration, and nutrient uptake remains a central question in watershed hydrology and biogeochemistry. Theoretical understanding predicts that nutrient uptake should increase as in-stream solute travel time lengthens and/or as concentration increases; however, results from field-based studies have been contradictory. We used a newly developed approach, Tracer Additions for Spiraling Curve Characterization (TASCC), to investigate relationships between solute travel time, nutrient concentration, and nutrient uptake across a range of stream types. This approach allows us to quantify in-stream nutrient uptake across a range of travel times and nutrient concentrations using single instantaneous injections (slugs) of conservative and non-conservative tracers. In some systems we observed counter-clockwise hysteresis loops in the relationship between nutrient uptake and concentration. Greater nutrient uptake on the falling limb of tracer breakthrough curves indicates stronger uptake for a given concentration at longer travel times. However, in other systems we did not observe hysteresis in these relationships. Lack of hysteresis indicates that nutrient uptake kinetics were not influenced by travel time travel time. Here we investigate the potential roles of travel time and in-stream flowpaths that could be responsible for hysteretic behavior.

The effect of the development of an emergency transfer system on the travel time to tertiary care centres in Japan

Directory of Open Access Journals (Sweden)

Arima Hideaki

2006-06-01

Full Text Available Abstract Background In Japan, the emergency medical system is categorized into three levels: primary, secondary, and tertiary, depending on the severity of the condition of the patient. Tertiary care centres accept patients who require 24-h monitoring. In this research, the average travel times (minutes from the centroids of all municipalities in Japan to the nearest tertiary care centre were estimated, using the geographic information system. The systems affecting travel time to tertiary care centres were also examined. Regression analysis was performed to determine the factors affecting the travel time to tertiary care centres, using selected variables representing road conditions and the emergency transfer system. Linear regression analysis was performed to identify specific benchmarks that would be effective in reducing the average travel time to tertiary care centres in prefectures with travel times longer than the average 57 min. Results The mean travel time was 57 min, the range was 83 min, and the standard deviation was 20.4. As a result of multiple regression analysis, average coverage area per tertiary care centre, kilometres of highway road per square kilometre, and population were selected as variables with impact on the average travel time. Based on results from linear regression analysis, benchmarks for the emergency transfer system that would effectively reduce travel time to the mean value of 57 min were identified: 26% pavement ratio of roads (percentage of paved road to general roads, and three tertiary care centres and 108 ambulances. Conclusion Regional gaps in the travel time to tertiary care centres were identified in Japan. The systems we should focus on to reducing travel time were identified. Further reduction of travel time to tertiary care centres can be effectively achieved by improving these specific systems. Linear regression analysis showed that a 26% pavement ratio and three tertiary care centres are beneficial to

Analysis of Modal Travel Time Variability Due to Mesoscale Ocean Structure

National Research Council Canada - National Science Library

Smith, Amy

1997-01-01

.... First, for an open ocean environment away from strong boundary currents, the effects of randomly phased linear baroclinic Rossby waves on acoustic travel time are shown to produce a variable overall...

Self-Efficacy Beliefs and Mental Time Travel Ability: Uncovering a Hidden Relationship in Educational Settings

Science.gov (United States)

Eren, Altay

2009-01-01

The aim of this study was threefold: first, it was to explore the profiles of student teachers' mental time travel ability; second, it was to examine the relationship between student teachers' mental time travel ability and self-efficacy beliefs; and third, it was to investigate the role of self-efficacy beliefs in relationship between the past…

Does Involuntary Mental Time Travel Make Sense in Prospective Teachers' Feelings and Behaviors during Lessons?

Science.gov (United States)

Eren, Altay; Yesilbursa, Amanda

2013-01-01

This study examined the effects of involuntary mental time travel into the past and into the future on prospective teachers' feelings and behaviors during the period of a class hour. A total of 110 prospective teachers participated voluntarily in the study. The results of the present study showed that (a) the involuntary mental time travel into…

The effect of centralization of health care services on travel time and its equality.

Science.gov (United States)

Kobayashi, Daisuke; Otsubo, Tetsuya; Imanaka, Yuichi

2015-03-01

To analyze the regional variations in travel time between patient residences and medical facilities for the treatment of ischemic heart disease and breast cancer, and to simulate the effects of health care services centralization on travel time and equality of access. We used medical insurance claims data for inpatients and outpatients for the two target diseases that had been filed between September 2008 and May 2009 in Kyoto Prefecture, Japan. Using a geographical information system, patient travel times were calculated based on the driving distance between patient residences and hospitals via highways and toll roads. Locations of residences and hospital locations were identified using postal codes. We then conducted a simulation analysis of centralization of health care services to designated regional core hospitals. The simulated changes in potential spatial access to care were examined. Inequalities in access to care were examined using Gini coefficients, which ranged from 0.4109 to 0.4574. Simulations of health care services centralization showed reduced travel time for most patients and overall improvements in equality of access, except in breast cancer outpatients. Our findings may contribute to the decision-making process in policies aimed at improving the potential spatial access to health care services. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Viruses as groundwater tracers: using ecohydrology to characterize short travel times in aquifers

Science.gov (United States)

Hunt, Randall J.; Borchardt, Mark A.; Bradbury, Kenneth R.

2014-01-01

Viruses are attractive tracers of short (population over time; therefore, the virus snapshot shed in the fecal wastes of an infected population at a specific point in time can serve as a marker for tracking virus and groundwater movement. The virus tracing approach and an example application are described to illustrate their ability to characterize travel times in high-groundwater velocity settings, and provide insight unavailable from standard hydrogeologic approaches. Although characterization of preferential flowpaths does not usually characterize the majority of other travel times occurring in the groundwater system (e.g., center of plume mass; tail of the breakthrough curve), virus approaches can trace very short times of transport, and thus can fill an important gap in our current hydrogeology toolbox.

Basic Investigations of Dynamic Travel Time Estimation Model for Traffic Signals Control Using Information from Optical Beacons

Science.gov (United States)

Okutani, Iwao; Mitsui, Tatsuro; Nakada, Yusuke

In this paper put forward are neuron-type models, i.e., neural network model, wavelet neuron model and three layered wavelet neuron model(WV3), for estimating traveling time between signalized intersections in order to facilitate adaptive setting of traffic signal parameters such as green time and offset. Model validation tests using simulated data reveal that compared to other models, WV3 model works very fast in learning process and can produce more accurate estimates of travel time. Also, it is exhibited that up-link information obtainable from optical beacons, i.e., travel time observed during the former cycle time in this case, makes a crucial input variable to the models in that there isn't any substantial difference between the change of estimated and simulated travel time with the change of green time or offset when up-link information is employed as input while there appears big discrepancy between them when not employed.

Carbon monoxide levels measured in major commuting corridors covering different landuse and roadway microenvironments in Hong Kong

Science.gov (United States)

Chan, L. Y.; Liu, Y. M.; Lee, S. C.; Chan, C. Y.

Vehicle exhaust is the major source of pollutant in modern cities. About half of Hong Kong residents are living in suburban or rural areas. They need to traverse through tunnels, highways, urban street canyons and other road conditions in different landuse areas when they traverse to work in urban centres or new towns. Also, there is increasing traffic, especially trucks across the border between Hong Kong and mainland China via several border highways. This study helps us in assessing the exposure level of suburban and cross border commuters. Carbon monoxide (CO) is used as a tracer for traffic emission. An experimental vehicle traversing major commuting corridors were used to measure CO levels in different landuse and roadway microenvironments including tunnels and highways. The air samples were taken simultaneously at the outside and inside of a travelling vehicle. Result indicates that the pattern of fluctuation of the out-vehicle and in-vehicle CO level vary with different landuse areas. The variation pattern of in-vehicle CO level is closely related to that of out-vehicle level. The effects of the out-vehicle CO concentration on the in-vehicle CO concentration under different roadway conditions in various landuse categories are examined. There is an indication that external air pollutants penetrated into the in-vehicle compartment through car body cracks, ventilation system. From our observation, the exhaust of a nearby petrol vehicle contributed significantly to the in-vehicle CO level. The use of low standard of diesel fuel from Shenzhen in mainland China leads to higher CO level near border area.

Frequency Dependence of Helioseismic Measurements of the Center-to-Limb Effect and Flow-induced Travel-time Shifts

Science.gov (United States)

Chen, Ruizhu; Zhao, Junwei

2018-02-01

Time–distance helioseismology measures acoustic travel times to infer the structure and flow field of the solar interior; however, both the mean travel times and the travel-time shifts suffer systematic center-to-limb variations, which complicate the interpretation and inversions of the time–distance measurements. In particular, the center-to-limb variation in travel-time shifts (CtoL effect) has a significant impact on the inference of the Sun’s meridional circulation, and needs to be removed from the helioseismic measurements, although the observational properties and the physical cause of the CtoL effect have yet to be investigated. In this study, we measure the CtoL effect in the frequency domain using Doppler-velocity data from the Solar Dynamics Observatory/Helioseismic and Magnetic Imager, and study its properties as a function of disk-centric distance, travel distance, and frequency of acoustic waves. It is found that the CtoL effect has a significant frequency dependence—it reverses sign at a frequency around 5.4 mHz and reaches maximum at around 4.0 mHz before the sign reversal. The tendency of frequency dependence varies with disk-centric distance in a way that both the sign-reversal frequency and the maximum-value frequency decrease closer to the limb. The variation tendency does not change with travel distance, but the variation magnitude is approximately proportional to travel distance. For comparison, the flow-induced travel-time shifts show little frequency dependence. These observational properties provide more clues on the nature of the CtoL effect, and also possibly lead to new ways of effect-removal for a more robust determination of the deep meridional flow.

Louisiana Speaks Transportation Option B Roadway Improvements, UTM Zone 15N NAD 83, Louisiana Recovery Authority (2007), [louisiana_speaks_transportation_option_b_roadway_improvements

Data.gov (United States)

Louisiana Geographic Information Center — This GIS shapefile data illustrates the regional roadways included in the Louisiana Speaks community growth option of compact and dispersed development (Option B)....

Louisiana Speaks Transportation Option C Roadway Improvements, UTM Zone 15N NAD 83, Louisiana Recovery Authority (2007), [louisiana_speaks_transportation_option_c_roadway_improvements

Data.gov (United States)

Louisiana Geographic Information Center — This GIS shapefile data illustrates the regional roadways included in the Louisiana Speaks community growth option of compact development (Option C). This network...

Louisiana Speaks Transportation Option A Roadway Improvements, UTM Zone 15N NAD 83, Louisiana Recovery Authority (2007), [louisiana_speaks_transportation_option_a_roadway_improvements

Data.gov (United States)

Louisiana Geographic Information Center — This GIS shapefile data illustrates the regional roadways included in the Louisiana Speaks Regional Plan community growth option of dispersed development (Option A)....

LHC 2008 talks Peut-on voyager dans le temps? (Is time travel possible?)

CERN Multimedia

2008-01-01

Scientific magazines (and sometimes even scientists themselves) regularly talk about the possibility of travelling through time. It has also been the subject of many science-fiction novels. We will first discuss what we mean when we talk about time travel, then explain what contemporary physics has to say about it. Thursday, 12 June 2008 at 8.00 p.m. Peut-on voyager dans le temps ? Etienne Klein Physicist at CEA and Doctor of Philosophy of Science The Globe, first floor No specialist knowledge required. Entrance free. http://www.cern.ch/globe

Branch-and-cut-and-price for the traveling salesman problem with time windows

DEFF Research Database (Denmark)

Røpke, Stefan; Madsen, Oli B.G.

In the traveling salesman problem with time windows (TSPTW) one is given a depot and a set of nodes to be visited by a salesman. The salesman starts his trip at the depot and must visit all nodes while respecting time windows at the nodes. The objective of the problem is to minimize the total...... distance traveled by the salesman. The TSPTW is formulated as a set-partitioning problem which is solved by using combined cut and column generation. The pricing sub problem in the column generation procedure is a shortest path problem with time window constraints and 2-cycle elimination. A standard column...

[Pre-travel advice and patient education of Hungarian travellers].

Science.gov (United States)

Lengyel, Ingrid; Felkai, Péter

2018-03-01

According to international surveys, over half of the travellers face some kind of health issue when travelling. The overwhelming majority of travel-related illnesses can be prevented with pre-travel medical consultations, but the syllabus and content of the consultation have to match the travel habits and culture of the given society. This publication explores the specificities and travel habits of Hungarian travellers. One hundred participants of a travel exhibition completed a survey about their international travel. As the survey was not representative, the data could only be processed through simple statistical methods. However, since the exhibition was presumably attended by those wishing to travel, the conclusions drawn from the results are worth publishing, since no similar survey in Hungary has been published before. Based on the suitable classification of age groups in travel medicine, 11% of the participants were adolescents / young adults (aged 15-24), 81% adults (25-59) and 8% elderly (60-74). Twenty-eight percent of the participants travel multiple times a year, 40% yearly and 32% of them less frequently; 16% of the adults, 8% of the adolescents and 4% of the elderly age group travel multiple times a year. The travel destinations of Hungarian travellers have remained practically unchanged since a study was conducted 13 years ago: the vast majority (95%) travelled within Europe, 2% to the United States, and 11% of them elsewhere. Since Hungarians do not travel to endemic areas, only 5% consulted their general practitioners (GPs) prior to travelling, and 29% did when they had to be vaccinated. Forty-two percent of those wishing to travel never consult their GPs, even though 29% of them are aware of some chronic illness. Instead, 51% gather their health information from the internet and only 6% from their doctors. By the contradiction between the poor health status of the majority of Hungarian travellers and the negligence of seeking pre-travel advice

Cognitive organization of roadway scenes : an empirical study.

NARCIS (Netherlands)

Gundy, C.M.

1995-01-01

This report describes six studies investigating the cognitive organization of roadway scenes. These scenes were represented by still photographs taken on a number of roads outside of built-up areas. Seventy-eight drivers, stratified by age and sex to simulate the Dutch driving population,

Monitoring the impact of decentralised chronic care services on patient travel time in rural Africa--methods and results in Northern Malawi.

Science.gov (United States)

Houben, Rein M G J; Van Boeckel, Thomas P; Mwinuka, Venance; Mzumara, Peter; Branson, Keith; Linard, Catherine; Chimbwandira, Frank; French, Neil; Glynn, Judith R; Crampin, Amelia C

2012-11-15

Decentralised health services form a key part of chronic care strategies in resource-limited settings by reducing the distance between patient and clinic and thereby the time and costs involved in travelling. However, few tools exist to evaluate the impact of decentralisation on patient travel time or what proportion of patients attend their nearest clinic. Here we develop methods to monitor changes in travel time, using data from the antiretroviral therapy (ART) roll-out in a rural district in North Malawi. Clinic position was combined with GPS information on the home village of patients accessing ART services in Karonga District (North Malawi) between July 2005 and July 2009. Potential travel time was estimated as the travel time for an individual attending their nearest clinic, and estimated actual travel time as the time to the clinic attended. This allowed us to calculate changes in potential and actual travel time as new clinics opened and track the proportion and origin of patients not accessing their nearest clinic. The model showed how the opening of further ART clinics in Karonga District reduced median potential travel time from 83 to 43 minutes, and median actual travel time fell from 83 to 47 minutes. The proportion of patients not attending their nearest clinic increased from 6% when two clinics were open, to 12% with four open. Integrating GPS information with patient data shows the impact of decentralisation on travel time and clinic choice to inform policy and research questions. In our case study, travel time decreased, accompanied by an increased uptake of services. However, the model also identified an increasing proportion of ART patients did not attend their nearest clinic.

Evaluating effectiveness of real-time advanced traveler information systems using a small test vehicle fleet

Science.gov (United States)

1997-01-01

ADVANCE was an in-vehicle advanced traveler information system (ATIS) providing route guidance in real time that operated in the northwestern portion and northwest suburbs of Chicago, Illinois. It used probe vehicles to generate dynamically travel ti...

Connected Traveler

Energy Technology Data Exchange (ETDEWEB)

2016-06-01

The Connected Traveler framework seeks to boost the energy efficiency of personal travel and the overall transportation system by maximizing the accuracy of predicted traveler behavior in response to real-time feedback and incentives. It is anticipated that this approach will establish a feedback loop that 'learns' traveler preferences and customizes incentives to meet or exceed energy efficiency targets by empowering individual travelers with information needed to make energy-efficient choices and reducing the complexity required to validate transportation system energy savings. This handout provides an overview of NREL's Connected Traveler project, including graphics, milestones, and contact information.

Use of videoconferencing in Wales to reduce carbon dioxide emissions, travel costs and time.

Science.gov (United States)

Lewis, Delyth; Tranter, Glynis; Axford, Alan T

2009-01-01

In September 2005 a telemedicine service was started to assist multidisciplinary teams in Wales to improve cancer services. In October 2006 and October 2007 users of videoconferencing equipment at one site completed questionnaires. During October 2006 a total of 18,000 km of car travel were avoided, equivalent to 1696 kg of CO(2) emission. During October 2007 a total of 20,800 km of car travel were avoided, equivalent to 2590 kg of CO(2) emission. We estimate that 48 trees would take a year to absorb that quantity of CO(2). The results of the surveys show that exploiting telemedicine makes better use of staff time, reduces the time spent travelling and assists in reducing climate change by limiting the emissions of CO(2).

Residential proximity to major roadways is associated with increased prevalence of allergic respiratory symptoms in children

Directory of Open Access Journals (Sweden)

Gregor Porebski

2014-11-01

Full Text Available [b]introduction and objective[/b]. Numerous epidemiologic studies have reported increased risk of allergic rhinitis and asthma in relation to ‘western life-style’, which represents diversity of factors. We hypothesized that residential proximity to major roadways, reflecting an exposure to traffic-related air pollution, is associated with prevalence of allergic respiratory symptoms in children. [b]materials and methods[/b]. A total of 8290 individuals of two age groups: 16 year olds and 7 year olds from Krakow, Poland were included. We used the Polish version of the International Study of Asthma and Allergy in Childhood supplemented with a question concerning the distance between a responder’s house and a high traffic density road: below 200 m, from 200–500 m, or more than 500 m. [b]results[/b]. Children and adolescents with a residential proximity closer to a major roadway had more frequent asthma-related symptoms in the last 12 months and at any time in the past. Consistent with the increased frequency of asthmatic symptoms, responders residing within 200 meters complained more often of sneezing, runny or blocked nose accompanied by itchy-watery eyes and hay fever in comparison to responders who resided 200–500 meters from a major roadway. The lowest rate of nasal symptoms was observed in residents living in the distance to major roads (> 500 meters. The rate of positive answers decreased in a distant-dependent manner. [b]conclusions[/b]. Our findings suggest an important spatial relationship between the distance from a major roadway and the evaluated respiratory symptoms. The results emphasize the need for more comprehensive air quality policies within urban areas with increased motor vehicle density.

Louisiana Speaks Regional Plan Vision New or Improved Roadways, UTM Zone 15N NAD 83, Louisiana Recovery Authority (2007), [louisiana_speaks_vision_roadway_improvements

Data.gov (United States)

Louisiana Geographic Information Center — This GIS shapefile data illustrates new or improved roadways included in the Louisiana Speaks Regional Plan Vision. This network accommodates a land use pattern that...

New Applications of Cosmogenic Radioactive Isotopes to Study Water Travel Times