A Risk-based Assessment And Management Framework For Multipollutant Air Quality

Science.gov (United States)

Frey, H. Christopher; Hubbell, Bryan

2010-01-01

The National Research Council recommended both a risk- and performance-based multipollutant approach to air quality management. Specifically, management decisions should be based on minimizing the exposure to, and risk of adverse effects from, multiple sources of air pollution and that the success of these decisions should be measured by how well they achieved this objective. We briefly describe risk analysis and its application within the current approach to air quality management. Recommendations are made as to how current practice could evolve to support a fully risk- and performance-based multipollutant air quality management system. The ability to implement a risk assessment framework in a credible and policy-relevant manner depends on the availability of component models and data which are scientifically sound and developed with an understanding of their application in integrated assessments. The same can be said about accountability assessments used to evaluate the outcomes of decisions made using such frameworks. The existing risk analysis framework, although typically applied to individual pollutants, is conceptually well suited for analyzing multipollutant management actions. Many elements of this framework, such as emissions and air quality modeling, already exist with multipollutant characteristics. However, the framework needs to be supported with information on exposure and concentration response relationships that result from multipollutant health studies. Because the causal chain that links management actions to emission reductions, air quality improvements, exposure reductions and health outcomes is parallel between prospective risk analyses and retrospective accountability assessments, both types of assessment should be placed within a single framework with common metrics and indicators where possible. Improvements in risk reductions can be obtained by adopting a multipollutant risk analysis framework within the current air quality management

Cumulative Risk Assessment (CRA): transforming the way we assess health risks.

Science.gov (United States)

Williams, Pamela R D; Dotson, G Scott; Maier, Andrew

2012-10-16

Human health risk assessments continue to evolve and now focus on the need for cumulative risk assessment (CRA). CRA involves assessing the combined risk from coexposure to multiple chemical and nonchemical stressors for varying health effects. CRAs are broader in scope than traditional chemical risk assessments because they allow for a more comprehensive evaluation of the interaction between different stressors and their combined impact on human health. Future directions of CRA include greater emphasis on local-level community-based assessments; integrating environmental, occupational, community, and individual risk factors; and identifying and implementing common frameworks and risk metrics for incorporating multiple stressors.

Questionnaire-based risk assessment system

International Nuclear Information System (INIS)

Sakajo, Satoko; Ohi, Tadashi

2004-01-01

In order to reduce human errors efficiently, it is important to evaluate error-likely tasks and improve them. There are a lot of evaluation methods, for example, experimental evaluation methods, investigations by the expert of human factors, checking guidelines, estimating human error probabilities, and so on. There are roughly two problems in those methods. (1) Qualitative evaluation methods do not evaluate how likely human errors will occur and do not estimate how effective the countermeasure is in reducing human error. (2) Most of the quantitative evaluation methods and detailed analysis methods require expert's judgment. We developed a questionnaire-based risk assessment method and its system. In this paper, we introduce the concept of the method, realization, and applications to a maintenance procedure of a nuclear power plant and an elevator. The feature of the method is that it is so simple and the inexpert can easily evaluate the risk of human error. Furthermore, because it is provided as an application service provider system, a lot of evaluators can use it simultaneously through internet and it is easy to collect and sum up the responses. We confirmed that it is useful to evaluate the risk of human error, analyze the problem, and estimate the effectiveness of countermeasures in advance through the applications. (author)

Addressing dependability by applying an approach for model-based risk assessment

International Nuclear Information System (INIS)

Gran, Bjorn Axel; Fredriksen, Rune; Thunem, Atoosa P.-J.

2007-01-01

This paper describes how an approach for model-based risk assessment (MBRA) can be applied for addressing different dependability factors in a critical application. Dependability factors, such as availability, reliability, safety and security, are important when assessing the dependability degree of total systems involving digital instrumentation and control (I and C) sub-systems. In order to identify risk sources their roles with regard to intentional system aspects such as system functions, component behaviours and intercommunications must be clarified. Traditional risk assessment is based on fault or risk models of the system. In contrast to this, MBRA utilizes success-oriented models describing all intended system aspects, including functional, operational and organizational aspects of the target. The EU-funded CORAS project developed a tool-supported methodology for the application of MBRA in security-critical systems. The methodology has been tried out within the telemedicine and e-commerce areas, and provided through a series of seven trials a sound basis for risk assessments. In this paper the results from the CORAS project are presented, and it is discussed how the approach for applying MBRA meets the needs of a risk-informed Man-Technology-Organization (MTO) model, and how methodology can be applied as a part of a trust case development

Addressing dependability by applying an approach for model-based risk assessment

Energy Technology Data Exchange (ETDEWEB)

Gran, Bjorn Axel [Institutt for energiteknikk, OECD Halden Reactor Project, NO-1751 Halden (Norway)]. E-mail: bjorn.axel.gran@hrp.no; Fredriksen, Rune [Institutt for energiteknikk, OECD Halden Reactor Project, NO-1751 Halden (Norway)]. E-mail: rune.fredriksen@hrp.no; Thunem, Atoosa P.-J. [Institutt for energiteknikk, OECD Halden Reactor Project, NO-1751 Halden (Norway)]. E-mail: atoosa.p-j.thunem@hrp.no

2007-11-15

This paper describes how an approach for model-based risk assessment (MBRA) can be applied for addressing different dependability factors in a critical application. Dependability factors, such as availability, reliability, safety and security, are important when assessing the dependability degree of total systems involving digital instrumentation and control (I and C) sub-systems. In order to identify risk sources their roles with regard to intentional system aspects such as system functions, component behaviours and intercommunications must be clarified. Traditional risk assessment is based on fault or risk models of the system. In contrast to this, MBRA utilizes success-oriented models describing all intended system aspects, including functional, operational and organizational aspects of the target. The EU-funded CORAS project developed a tool-supported methodology for the application of MBRA in security-critical systems. The methodology has been tried out within the telemedicine and e-commerce areas, and provided through a series of seven trials a sound basis for risk assessments. In this paper the results from the CORAS project are presented, and it is discussed how the approach for applying MBRA meets the needs of a risk-informed Man-Technology-Organization (MTO) model, and how methodology can be applied as a part of a trust case development.

An Integrated Risk Index Model Based on Hierarchical Fuzzy Logic for Underground Risk Assessment

Directory of Open Access Journals (Sweden)

Muhammad Fayaz

2017-10-01

Full Text Available Available space in congested cities is getting scarce due to growing urbanization in the recent past. The utilization of underground space is considered as a solution to the limited space in smart cities. The numbers of underground facilities are growing day by day in the developing world. Typical underground facilities include the transit subway, parking lots, electric lines, water supply and sewer lines. The likelihood of the occurrence of accidents due to underground facilities is a random phenomenon. To avoid any accidental loss, a risk assessment method is required to conduct the continuous risk assessment and report any abnormality before it happens. In this paper, we have proposed a hierarchical fuzzy inference based model for under-ground risk assessment. The proposed hierarchical fuzzy inference architecture reduces the total number of rules from the rule base. Rule reduction is important because the curse of dimensionality damages the transparency and interpretation as it is very tough to understand and justify hundreds or thousands of fuzzy rules. The computation time also increases as rules increase. The proposed model takes 175 rules having eight input parameters to compute the risk index, and the conventional fuzzy logic requires 390,625 rules, having the same number of input parameters to compute risk index. Hence, the proposed model significantly reduces the curse of dimensionality. Rule design for fuzzy logic is also a tedious task. In this paper, we have also introduced new rule schemes, namely maximum rule-based and average rule-based; both schemes can be used interchangeably according to the logic needed for rule design. The experimental results show that the proposed method is a virtuous choice for risk index calculation where the numbers of variables are greater.

GM Risk Assessment

Science.gov (United States)

Sparrow, Penny A. C.

GM risk assessments play an important role in the decision-making process surrounding the regulation, notification and permission to handle Genetically Modified Organisms (GMOs). Ultimately the role of a GM risk assessment will be to ensure the safe handling and containment of the GMO; and to assess any potential impacts on the environment and human health. A risk assessment should answer all ‘what if’ scenarios, based on scientific evidence.

The process of developing policy based on global environmental risk assessment

International Nuclear Information System (INIS)

Fisk, D.J.

1995-01-01

A brief presentation is given on developing policy based on a global environmental risk assessment. The author looks at the global warming issue as if it were a formal problem in risk assessment. He uses that framework to make one or two suggestions as to how the interaction of policy and research might evolve as the climate convention progresses

WORKSHOP ON APPLICATION OF STATISTICAL METHODS TO BIOLOGICALLY-BASED PHARMACOKINETIC MODELING FOR RISK ASSESSMENT

Science.gov (United States)

Biologically-based pharmacokinetic models are being increasingly used in the risk assessment of environmental chemicals. These models are based on biological, mathematical, statistical and engineering principles. Their potential uses in risk assessment include extrapolation betwe...

Risk Assessment

Science.gov (United States)

How the EPA conducts risk assessment to protect human health and the environment. Several assessments are included with the guidelines, models, databases, state-based RSL Tables, local contacts and framework documents used to perform these assessments.

Ecological risk assessment of hydropower dam construction based on ecological network analysis

OpenAIRE

Chen, Shaoqing; Fath, Brian D.; Chen, Bin

2010-01-01

Dam construction is regarded as one of the major factors contributing to significant modifications of the river ecosystems, and the ecological risk (ER) assessment of dam construction has received growing attention in recent years. In the present study, we explored the potential ecological risk caused by dam project based on the general principles of the ecological risk assessment. Ecological network analysis was proposed as the usable analytic method for the implement of ecological risk asse...

Network Security Risk Assessment System Based on Attack Graph and Markov Chain

Science.gov (United States)

Sun, Fuxiong; Pi, Juntao; Lv, Jin; Cao, Tian

2017-10-01

Network security risk assessment technology can be found in advance of the network problems and related vulnerabilities, it has become an important means to solve the problem of network security. Based on attack graph and Markov chain, this paper provides a Network Security Risk Assessment Model (NSRAM). Based on the network infiltration tests, NSRAM generates the attack graph by the breadth traversal algorithm. Combines with the international standard CVSS, the attack probability of atomic nodes are counted, and then the attack transition probabilities of ones are calculated by Markov chain. NSRAM selects the optimal attack path after comprehensive measurement to assessment network security risk. The simulation results show that NSRAM can reflect the actual situation of network security objectively.

Eielson Air Force Base OU-1 baseline risk assessment

International Nuclear Information System (INIS)

Jarvis, M.T.; Jarvis, T.T.; Van Houten, N.C.; Lewis, R.E.

1993-09-01

This Baseline Risk Assessment report is the second volume in a set of three volumes for operable Unit 1 (OU-1). The companion documents contain the Remedial Investigation and the Feasibility Study. Operable Unit 1 (OU-1) is one of several groups of hazardous waste sites located at Eielson Air Force Base (AFB) near Fairbanks, Alaska. The operable units at Eielson are typically characterized by petroleum, oil, lubricant/solvent contamination, and by the presence of organics floating at the water table. In 1989 and 1990, firms under contract to the Air Force conducted field studies to gather information about the extent of chemical contamination in soil, groundwater, and soil air pore space (soil gas) at the site. This report documents the results of a baseline risk assessment, which uses the 1989 and 1991 site characterization database to quantify the potential human health risk associated with past Base industrial activities in the vicinity of OU-1. Background data collected in 1992 were also used in the preparation of this report

Risk-based environmental assessment for uranium mines – Some Canadian and Australian experience

International Nuclear Information System (INIS)

Phaneuf, M.; McKee, M.; Woods, P.

2014-01-01

The Risk-Based Approach to Environmental Assessment in Australia: • This has emerged over the last 2 decades; • Currently usually based around the Australian and New Zealand standard (AS4360:1999) for risk assessment: • Potential impact events; • Inherent risk levels (e.g. low, moderate) using a matrix approach; • Design and operational control measures; • Residual risk levels; • Outcomes to be achieved; • Outcomes measurement criteria - • Leading to ‘compliance’ monitoring; • Leading indicator criteria - • Leading to ‘early warning’ monitoring

Flood Risk Assessment Based On Security Deficit Analysis

Science.gov (United States)

Beck, J.; Metzger, R.; Hingray, B.; Musy, A.

Risk is a human perception: a given risk may be considered as acceptable or unac- ceptable depending on the group that has to face that risk. Flood risk analysis of- ten estimates economic losses from damages, but neglects the question of accept- able/unacceptable risk. With input from land use managers, politicians and other stakeholders, risk assessment based on security deficit analysis determines objects with unacceptable risk and their degree of security deficit. Such a risk assessment methodology, initially developed by the Swiss federal authorities, is illustrated by its application on a reach of the Alzette River (Luxembourg) in the framework of the IRMA-SPONGE FRHYMAP project. Flood risk assessment always involves a flood hazard analysis, an exposed object vulnerability analysis, and an analysis combing the results of these two previous analyses. The flood hazard analysis was done with the quasi-2D hydraulic model FldPln to produce flood intensity maps. Flood intensity was determined by the water height and velocity. Object data for the vulnerability analysis, provided by the Luxembourg government, were classified according to their potential damage. Potential damage is expressed in terms of direct, human life and secondary losses. A thematic map was produced to show the object classification. Protection goals were then attributed to the object classes. Protection goals are assigned in terms of an acceptable flood intensity for a certain flood frequency. This is where input from land use managers and politicians comes into play. The perception of risk in the re- gion or country influences the protection goal assignment. Protection goals as used in Switzerland were used in this project. Thematic maps showing the protection goals of each object in the case study area for a given flood frequency were produced. Com- parison between an object's protection goal and the intensity of the flood that touched the object determine the acceptability of the risk and the

Violent reinjury risk assessment instrument (VRRAI) for hospital-based violence intervention programs.

Science.gov (United States)

Kramer, Erik J; Dodington, James; Hunt, Ava; Henderson, Terrell; Nwabuo, Adaobi; Dicker, Rochelle; Juillard, Catherine

2017-09-01

Violent injury is the second most common cause of death among 15- to 24-year olds in the US. Up to 58% of violently injured youth return to the hospital with a second violent injury. Hospital-based violence intervention programs (HVIPs) have been shown to reduce injury recidivism through intensive case management. However, no validated guidelines for risk assessment strategies in the HVIP setting have been reported. We aimed to use qualitative methods to investigate the key components of risk assessments employed by HVIP case managers and to propose a risk assessment model based on this qualitative analysis. An established academic hospital-affiliated HVIP served as the nexus for this research. Thematic saturation was reached with 11 semi-structured interviews and two focus groups conducted with HVIP case managers and key informants identified through snowball sampling. Interactions were analyzed by a four-member team using Nvivo 10, employing the constant comparison method. Risk factors identified were used to create a set of models presented in two follow-up HVIP case managers and leadership focus groups. Eighteen key themes within seven domains (environment, identity, mental health, behavior, conflict, indicators of lower risk, and case management) and 141 potential risk factors for use in the risk assessment framework were identified. The most salient factors were incorporated into eight models that were presented to the HVIP case managers. A 29-item algorithmic structured professional judgment model was chosen. We identified four tiers of risk factors for violent reinjury that were incorporated into a proposed risk assessment instrument, VRRAI. Copyright © 2017 Elsevier Inc. All rights reserved.

Novel two-tiered approach of ecological risk assessment for pesticide mixtures based on joint effects.

Science.gov (United States)

Tian, Dayong; Mao, Haichen; Lv, Huichao; Zheng, Yong; Peng, Conghu; Hou, Shaogang

2018-02-01

Ecological risk assessments for mixtures have attracted considerable attention. In this study, 38 pesticides in the real environment were taken as objects and their toxicities to different organisms from three trophic levels were employed to assess the ecological risk of the mixture. The first tier assessment was based on the CA effect and the obtained sum of risk quotients (SRQ species-CA ) were 3.06-9.22. The second tier assessment was based on non-CA effects and the calculated SRQ species-TU are 5.37-9.29 using joint effects (TU sum ) as modified coefficients, which is higher than SRQ species-CA and indicates that ignoring joint effects might run the risk of underestimating the actual impact of pesticide mixtures. Due to the influences of synergistic and antagonistic effects, risk contribution of components to mixture risks based on non-CA effects are different from those based on the CA effect. Moreover, it was found that the top 8 dominating components explained 95.5%-99.8% of mixture risks in this study. The dominating components are similar in the two tiers for a given species. Accordingly, a novel two-tiered approach was proposed to assess the ecological risks of mixtures based on joint effects. This study provides new insights for ecological risk assessments with the consideration of joint effects of components in the pesticide mixtures. Copyright © 2017 Elsevier Ltd. All rights reserved.

Can an Internet-based health risk assessment highlight problems of heart disease risk factor awareness? A cross-sectional analysis.

Science.gov (United States)

Dickerson, Justin B; McNeal, Catherine J; Tsai, Ginger; Rivera, Cathleen M; Smith, Matthew Lee; Ohsfeldt, Robert L; Ory, Marcia G

2014-04-18

Health risk assessments are becoming more popular as a tool to conveniently and effectively reach community-dwelling adults who may be at risk for serious chronic conditions such as coronary heart disease (CHD). The use of such instruments to improve adults' risk factor awareness and concordance with clinically measured risk factor values could be an opportunity to advance public health knowledge and build effective interventions. The objective of this study was to determine if an Internet-based health risk assessment can highlight important aspects of agreement between respondents' self-reported and clinically measured CHD risk factors for community-dwelling adults who may be at risk for CHD. Data from an Internet-based cardiovascular health risk assessment (Heart Aware) administered to community-dwelling adults at 127 clinical sites were analyzed. Respondents were recruited through individual hospital marketing campaigns, such as media advertising and print media, found throughout inpatient and outpatient facilities. CHD risk factors from the Framingham Heart Study were examined. Weighted kappa statistics were calculated to measure interrater agreement between respondents' self-reported and clinically measured CHD risk factors. Weighted kappa statistics were then calculated for each sample by strata of overall 10-year CHD risk. Three samples were drawn based on strategies for treating missing data: a listwise deleted sample, a pairwise deleted sample, and a multiple imputation (MI) sample. The MI sample (n=16,879) was most appropriate for addressing missing data. No CHD risk factor had better than marginal interrater agreement (κ>.60). High-density lipoprotein cholesterol (HDL-C) exhibited suboptimal interrater agreement that deteriorated (eg, κInternet-based health risk assessments such as Heart Aware may contribute to public health surveillance, but they must address selection bias of Internet-based recruitment methods.

German data for risk based fire safety assessment

International Nuclear Information System (INIS)

Roewekamp, M.; Berg, H.P.

1998-01-01

Different types of data are necessary to perform risk based fire safety assessments and, in particular, to quantify the fire event tree considering the plant specific conditions. Data on fire barriers, fire detection and extinguishing, including also data on secondary effects of a fire, have to be used for quantifying the potential hazard and damage states. The existing German database on fires in nuclear power plants (NPPs) is very small. Therefore, in general generic data, mainly from US databases, are used for risk based safety assessments. Due to several differences in the plant design and conditions generic data can only be used as conservative assumptions. World-wide existing generic data on personnel failures in case of fire fighting have only to be adapted to the plant specific conditions inside the NPP to be investigated. In contrary, unavailabilities of fire barrier elements may differ strongly depending on different standards, testing requirements, etc. In addition, the operational behaviour of active fire protection equipment may vary depending on type and manufacturer. The necessity for more detailed and for additional plant specific data was the main reason for generating updated German data on the operational behaviour of active fire protection equipment/features in NPPs to support risk based fire safety analyses being recommended to be carried out as an additional tool to deterministic fire hazard analyses in the frame of safety reviews. The results of these investigations revealed a broader and more realistic database for technical reliability of active fire protection means, but improvements as well as collection of further data are still necessary. (author)

Risk-based systems analysis for emerging technologies: Applications of a technology risk assessment model to public decision making

International Nuclear Information System (INIS)

Quadrel, M.J.; Fowler, K.M.; Cameron, R.; Treat, R.J.; McCormack, W.D.; Cruse, J.

1995-01-01

The risk-based systems analysis model was designed to establish funding priorities among competing technologies for tank waste remediation. The model addresses a gap in the Department of Energy's (DOE's) ''toolkit'' for establishing funding priorities among emerging technologies by providing disciplined risk and cost assessments of candidate technologies within the context of a complete remediation system. The model is comprised of a risk and cost assessment and a decision interface. The former assesses the potential reductions in risk and cost offered by new technology relative to the baseline risk and cost of an entire system. The latter places this critical information in context of other values articulated by decision makers and stakeholders in the DOE system. The risk assessment portion of the model is demonstrated for two candidate technologies for tank waste retrieval (arm-based mechanical retrieval -- the ''long reach arm'') and subsurface barriers (close-coupled chemical barriers). Relative changes from the base case in cost and risk are presented for these two technologies to illustrate how the model works. The model and associated software build on previous work performed for DOE's Office of Technology Development and the former Underground Storage Tank Integrated Demonstration, and complement a decision making tool presented at Waste Management 1994 for integrating technical judgements and non-technical (stakeholder) values when making technology funding decisions

Task-based dermal exposure models for regulatory risk assessment

NARCIS (Netherlands)

Warren, N.D.; Marquart, H.; Christopher, Y.; Laitinen, J.; Hemmen, J.J. van

2006-01-01

The regulatory risk assessment of chemicals requires the estimation of occupational dermal exposure. Until recently, the models used were either based on limited data or were specific to a particular class of chemical or application. The EU project RISKOFDERM has gathered a considerable number of

Data base of accident and agricultural statistics for transportation risk assessment

Energy Technology Data Exchange (ETDEWEB)

Saricks, C.L.; Williams, R.G.; Hopf, M.R.

1989-11-01

A state-level data base of accident and agricultural statistics has been developed to support risk assessment for transportation of spent nuclear fuels and high-level radioactive wastes. This data base will enhance the modeling capabilities for more route-specific analyses of potential risks associated with transportation of these wastes to a disposal site. The data base and methodology used to develop state-specific accident and agricultural data bases are described, and summaries of accident and agricultural statistics are provided. 27 refs., 9 tabs.

Data base of accident and agricultural statistics for transportation risk assessment

International Nuclear Information System (INIS)

Saricks, C.L.; Williams, R.G.; Hopf, M.R.

1989-11-01

A state-level data base of accident and agricultural statistics has been developed to support risk assessment for transportation of spent nuclear fuels and high-level radioactive wastes. This data base will enhance the modeling capabilities for more route-specific analyses of potential risks associated with transportation of these wastes to a disposal site. The data base and methodology used to develop state-specific accident and agricultural data bases are described, and summaries of accident and agricultural statistics are provided. 27 refs., 9 tabs

Waste management project’s alternatives: A risk-based multi-criteria assessment (RBMCA) approach

International Nuclear Information System (INIS)

Karmperis, Athanasios C.; Sotirchos, Anastasios; Aravossis, Konstantinos; Tatsiopoulos, Ilias P.

2012-01-01

Highlights: ► We examine the evaluation of a waste management project’s alternatives. ► We present a novel risk-based multi-criteria assessment (RBMCA) approach. ► In the RBMCA the evaluation criteria are based on the quantitative risk analysis of the project’s alternatives. ► Correlation between the criteria weight values and the decision makers’ risk preferences is examined. ► Preference to the multi-criteria against the one-criterion evaluation process is discussed. - Abstract: This paper examines the evaluation of a waste management project’s alternatives through a quantitative risk analysis. Cost benefit analysis is a widely used method, in which the investments are mainly assessed through the calculation of their evaluation indicators, namely benefit/cost (B/C) ratios, as well as the quantification of their financial, technical, environmental and social risks. Herein, a novel approach in the form of risk-based multi-criteria assessment (RBMCA) is introduced, which can be used by decision makers, in order to select the optimum alternative of a waste management project. Specifically, decision makers use multiple criteria, which are based on the cumulative probability distribution functions of the alternatives’ B/C ratios. The RBMCA system is used for the evaluation of a waste incineration project’s alternatives, where the correlation between the criteria weight values and the decision makers’ risk preferences is analyzed and useful conclusions are discussed.

Risk-Based Maintenance Assessment in the Manufacturing Industry: Minimisation of Suboptimal Prioritisation

Directory of Open Access Journals (Sweden)

Ratnayake R.M. Chandima

2017-03-01

Full Text Available Manufacturing firms continuously strive to increase the efficiency and effectiveness in the maintenance management processes. Focus is placed on eliminating the unexpected failures which cause unnecessary costs and the production losses. Risk-based maintenance (RBM strategies enable to address the above through the identification of probability and consequences of potential failures whilst providing a way for prioritisation of maintenance actions based on the risk of possible failures. Such prioritisations enable to identify the optimal maintenance strategy, intervals of maintenance tasks, and optimal level of spare parts inventory. However, the risk assessment activities are performed with the support of a risk matrix. Suboptimal classifications and/or prioritisations arise due to the inherent nature of the risk matrix. This is caused by the fact that there are no means to incorporate actual circumstances at the boundary of the input ranges or at the levels of linguistic data and risk categories. In this paper, a risk matrix is first developed in collaboration with one of the manufacturing firms in Poland. Then, it illustrates the use of fuzzy logic for minimisation of suboptimal prioritisation and/or classifications using a fuzzy inference system (FIS together with illustrative membership functions and a rule base. Finally, an illustrative risk assessment is also demonstrated to illustrate the methodology.

A Risk Assessment Example for Soil Invertebrates Using Spatially Explicit Agent-Based Models

DEFF Research Database (Denmark)

Reed, Melissa; Alvarez, Tania; Chelinho, Sonia

2016-01-01

Current risk assessment methods for measuring the toxicity of plant protection products (PPPs) on soil invertebrates use standardized laboratory conditions to determine acute effects on mortality and sublethal effects on reproduction. If an unacceptable risk is identified at the lower tier...... population models for ubiquitous soil invertebrates (collembolans and earthworms) as refinement options in current risk assessment. Both are spatially explicit agent-based models (ABMs), incorporating individual and landscape variability. The models were used to provide refined risk assessments for different...... application scenarios of a hypothetical pesticide applied to potato crops (full-field spray onto the soil surface [termed “overall”], in-furrow, and soil-incorporated pesticide applications). In the refined risk assessment, the population models suggest that soil invertebrate populations would likely recover...

Health Risk-Based Assessment and Management of Heavy Metals-Contaminated Soil Sites in Taiwan

Directory of Open Access Journals (Sweden)

Zueng-Sang Chen

2010-10-01

Full Text Available Risk-based assessment is a way to evaluate the potential hazards of contaminated sites and is based on considering linkages between pollution sources, pathways, and receptors. These linkages can be broken by source reduction, pathway management, and modifying exposure of the receptors. In Taiwan, the Soil and Groundwater Pollution Remediation Act (SGWPR Act uses one target regulation to evaluate the contamination status of soil and groundwater pollution. More than 600 sites contaminated with heavy metals (HMs have been remediated and the costs of this process are always high. Besides using soil remediation techniques to remove contaminants from these sites, the selection of possible remediation methods to obtain rapid risk reduction is permissible and of increasing interest. This paper discusses previous soil remediation techniques applied to different sites in Taiwan and also clarified the differences of risk assessment before and after soil remediation obtained by applying different risk assessment models. This paper also includes many case studies on: (1 food safety risk assessment for brown rice growing in a HMs-contaminated site; (2 a tiered approach to health risk assessment for a contaminated site; (3 risk assessment for phytoremediation techniques applied in HMs-contaminated sites; and (4 soil remediation cost analysis for contaminated sites in Taiwan.

Health Risk-Based Assessment and Management of Heavy Metals-Contaminated Soil Sites in Taiwan

Science.gov (United States)

Lai, Hung-Yu; Hseu, Zeng-Yei; Chen, Ting-Chien; Chen, Bo-Ching; Guo, Horng-Yuh; Chen, Zueng-Sang

2010-01-01

Risk-based assessment is a way to evaluate the potential hazards of contaminated sites and is based on considering linkages between pollution sources, pathways, and receptors. These linkages can be broken by source reduction, pathway management, and modifying exposure of the receptors. In Taiwan, the Soil and Groundwater Pollution Remediation Act (SGWPR Act) uses one target regulation to evaluate the contamination status of soil and groundwater pollution. More than 600 sites contaminated with heavy metals (HMs) have been remediated and the costs of this process are always high. Besides using soil remediation techniques to remove contaminants from these sites, the selection of possible remediation methods to obtain rapid risk reduction is permissible and of increasing interest. This paper discusses previous soil remediation techniques applied to different sites in Taiwan and also clarified the differences of risk assessment before and after soil remediation obtained by applying different risk assessment models. This paper also includes many case studies on: (1) food safety risk assessment for brown rice growing in a HMs-contaminated site; (2) a tiered approach to health risk assessment for a contaminated site; (3) risk assessment for phytoremediation techniques applied in HMs-contaminated sites; and (4) soil remediation cost analysis for contaminated sites in Taiwan. PMID:21139851

Risk based modelling

International Nuclear Information System (INIS)

Chapman, O.J.V.; Baker, A.E.

1993-01-01

Risk based analysis is a tool becoming available to both engineers and managers to aid decision making concerning plant matters such as In-Service Inspection (ISI). In order to develop a risk based method, some form of Structural Reliability Risk Assessment (SRRA) needs to be performed to provide a probability of failure ranking for all sites around the plant. A Probabilistic Risk Assessment (PRA) can then be carried out to combine these possible events with the capability of plant safety systems and procedures, to establish the consequences of failure for the sites. In this way the probability of failures are converted into a risk based ranking which can be used to assist the process of deciding which sites should be included in an ISI programme. This paper reviews the technique and typical results of a risk based ranking assessment carried out for nuclear power plant pipework. (author)

Patient caries risk assessment

DEFF Research Database (Denmark)

Twetman, Svante; Fontana, Margherita

2009-01-01

Risk assessment is an essential component in the decision-making process for the correct prevention and management of dental caries. Multiple risk factors and indicators have been proposed as targets in the assessment of risk of future disease, varying sometimes based on the age group at which...... they are targeted. Multiple reviews and systematic reviews are available in the literature on this topic. This chapter focusses primarily on results of reviews based on longitudinal studies required to establish the accuracy of caries risk assessment. These findings demonstrate that there is a strong body...... of evidence to support that caries experience is still, unfortunately, the single best predictor for future caries development. In young children, prediction models which include a variety of risk factors seem to increase the accuracy of the prediction, while the usefulness of additional risk factors...

Leaching characteristics, ecotoxicity, and risk assessment based management of mine wastes

Science.gov (United States)

Kim, J.; Ju, W. J.; Jho, E. H.; Nam, K.; Hong, J. K.

2016-12-01

Mine wastes generated during mining activities in metal mines generally contain high concentrations of metals that may impose toxic effects to surrounding environment. Thus, it is necessary to properly assess the mining-impacted landscapes for management. The study investigated leaching characteristics, potential environmental effects, and human health risk of mine wastes from three different metal mines in South Korea (molybdenum mine, lead-zinc mine, and magnetite mine). The heavy metal concentrations in the leachates obtained by using the Korean Standard Test Method for Solid Wastes (STM), Toxicity Characteristics Leaching Procedure (TCLP), and Synthetic Precipitation Leaching Procedure (SPLP) met the Korea Waste Control Act and the USEPA region 3 regulatory levels accordingly, even though the mine wastes contained high concentrations of metals. Assuming that the leachates may get into nearby water sources, the leachate toxicity was tested using Daphnia Magna. The toxic unit (TU) values after 24 h and 48 h exposure of all the mine wastes tested met the Korea Allowable Effluent Water Quality Standards (TUwaste may have long-term toxic effects (TU>1 for the eluent at L/S of 30) implying that the long-term effect of mine wastes left in mining areas need to be assessed. Considering reuse of mine wastes as a way of managing mine wastes, the human health risk assessment of reusing the lead-zinc mine waste in industrial areas was carried out using the bioavailable fraction of the heavy metals contained in the mine wastes, which was determined by using the Solubility/Bioavailability Research Consortium method. There may be potential carcinogenic risk (9.7E-05) and non-carcinogenic risk (HI, Hazard Index of 1.0E+00) as CR≧1.0E-05 has carcinogenic risk and HI≧1.0E+00 has non-carcinogenic risk. Overall, this study shows that not only the concentration-based assessment but ecological toxic effect and human health risk based assessments can be utilized for mining

Risk assessment of storm surge disaster based on numerical models and remote sensing

Science.gov (United States)

Liu, Qingrong; Ruan, Chengqing; Zhong, Shan; Li, Jian; Yin, Zhonghui; Lian, Xihu

2018-06-01

Storm surge is one of the most serious ocean disasters in the world. Risk assessment of storm surge disaster for coastal areas has important implications for planning economic development and reducing disaster losses. Based on risk assessment theory, this paper uses coastal hydrological observations, a numerical storm surge model and multi-source remote sensing data, proposes methods for valuing hazard and vulnerability for storm surge and builds a storm surge risk assessment model. Storm surges in different recurrence periods are simulated in numerical models and the flooding areas and depth are calculated, which are used for assessing the hazard of storm surge; remote sensing data and GIS technology are used for extraction of coastal key objects and classification of coastal land use are identified, which is used for vulnerability assessment of storm surge disaster. The storm surge risk assessment model is applied for a typical coastal city, and the result shows the reliability and validity of the risk assessment model. The building and application of storm surge risk assessment model provides some basis reference for the city development plan and strengthens disaster prevention and mitigation.

Community-Based Diabetes Screening and Risk Assessment in Rural West Virginia

Directory of Open Access Journals (Sweden)

Ranjita Misra

2016-01-01

Full Text Available This project utilized a cross-sectional study design to assess diabetes risk among 540 individuals from 12 counties using trained extension agents and community organizations in West Virginia. Individuals were screened for diabetes using (1 the validated 7-item diabetes risk assessment survey and (2 hemoglobin A1c tests. Demographic and lifestyle behaviors were also collected. The average age, body mass index, and A1c were 51.2±16.4, 31.1±7.5, and 5.8±0.74, respectively. The majority were females, Non-Hispanic Whites with no prior diagnosis of diabetes. Screenings showed that 61.8% of participants were at high risk for diabetes. Family history of diabetes (siblings or parents, overweight or obese status, sedentary lifestyle, and older age were commonly prevalent risk factors. Higher risk scores computed from the 7-item questions correlated positively with higher A1c (r=0.221, P<0.001. In multivariate logistic regression analyses, higher diabetes risk was predicted by obesity, older age, family history of hypertension, and gestational diabetes. Females were 4 times at higher risk than males. The findings indicated that community-based screenings were an effective way to assess diabetes risk in rural West Virginia. Linking diabetes screenings with referrals to lifestyle programs for high risk individuals can help reduce the burden of diabetes in the state.

Intrusion detection in cloud computing based attack patterns and risk assessment

Directory of Open Access Journals (Sweden)

Ben Charhi Youssef

2017-05-01

Full Text Available This paper is an extension of work originally presented in SYSCO CONF.We extend our previous work by presenting the initial results of the implementation of intrusion detection based on risk assessment on cloud computing. The idea focuses on a novel approach for detecting cyber-attacks on the cloud environment by analyzing attacks pattern using risk assessment methodologies. The aim of our solution is to combine evidences obtained from Intrusion Detection Systems (IDS deployed in a cloud with risk assessment related to each attack pattern. Our approach presents a new qualitative solution for analyzing each symptom, indicator and vulnerability analyzing impact and likelihood of distributed and multi-steps attacks directed to cloud environments. The implementation of this approach will reduce the number of false alerts and will improve the performance of the IDS.

Sensors vs. experts - a performance comparison of sensor-based fall risk assessment vs. conventional assessment in a sample of geriatric patients.

Science.gov (United States)

Marschollek, Michael; Rehwald, Anja; Wolf, Klaus-Hendrik; Gietzelt, Matthias; Nemitz, Gerhard; zu Schwabedissen, Hubertus Meyer; Schulze, Mareike

2011-06-28

Fall events contribute significantly to mortality, morbidity and costs in our ageing population. In order to identify persons at risk and to target preventive measures, many scores and assessment tools have been developed. These often require expertise and are costly to implement. Recent research investigates the use of wearable inertial sensors to provide objective data on motion features which can be used to assess individual fall risk automatically. So far it is unknown how well this new method performs in comparison with conventional fall risk assessment tools. The aim of our research is to compare the predictive performance of our new sensor-based method with conventional and established methods, based on prospective data. In a first study phase, 119 inpatients of a geriatric clinic took part in motion measurements using a wireless triaxial accelerometer during a Timed Up&Go (TUG) test and a 20 m walk. Furthermore, the St. Thomas Risk Assessment Tool in Falling Elderly Inpatients (STRATIFY) was performed, and the multidisciplinary geriatric care team estimated the patients' fall risk. In a second follow-up phase of the study, 46 of the participants were interviewed after one year, including a fall and activity assessment. The predictive performances of the TUG, the STRATIFY and team scores are compared. Furthermore, two automatically induced logistic regression models based on conventional clinical and assessment data (CONV) as well as sensor data (SENSOR) are matched. Among the risk assessment scores, the geriatric team score (sensitivity 56%, specificity 80%) outperforms STRATIFY and TUG. The induced logistic regression models CONV and SENSOR achieve similar performance values (sensitivity 68%/58%, specificity 74%/78%, AUC 0.74/0.72, +LR 2.64/2.61). Both models are able to identify more persons at risk than the simple scores. Sensor-based objective measurements of motion parameters in geriatric patients can be used to assess individual fall risk, and our

Risk Assessment

OpenAIRE

Hrdová, Edita

2012-01-01

This diploma thesis is focused on companies risk evaluation before endorsement of Loan deriving from business relationships. The aim of this thesis is not only to describe individual steps of risk assessment, but also perfom analysis of particular companies based on available data, i.e. Balance sheet, Profit and Loss statement and external rating and after that propose solution for each company. My analysis will be based on theoretical knowledge, further on experience related to my job role a...

Oximeter-based autonomic state indicator algorithm for cardiovascular risk assessment.

Science.gov (United States)

Grote, Ludger; Sommermeyer, Dirk; Zou, Ding; Eder, Derek N; Hedner, Jan

2011-02-01

Cardiovascular (CV) risk assessment is important in clinical practice. An autonomic state indicator (ASI) algorithm based on pulse oximetry was developed and validated for CV risk assessment. One hundred forty-eight sleep clinic patients (98 men, mean age 50 ± 13 years) underwent an overnight study using a novel photoplethysmographic sensor. CV risk was classified according to the European Society of Hypertension/European Society of Cardiology (ESH/ESC) risk factor matrix. Five signal components reflecting cardiac and vascular activity (pulse wave attenuation, pulse rate acceleration, pulse propagation time, respiration-related pulse oscillation, and oxygen desaturation) extracted from 99 randomly selected subjects were used to train the classification algorithm. The capacity of the algorithm for CV risk prediction was validated in 49 additional patients. Each signal component contributed independently to CV risk prediction. The sensitivity and specificity of the algorithm to distinguish high/low CV risk in the validation group were 80% and 77%, respectively. The area under the receiver operating characteristic curve for high CV risk classification was 0.84. β-Blocker treatment was identified as an important factor for classification that was not in line with the ESH/ESC reference matrix. Signals derived from overnight oximetry recording provide a novel potential tool for CV risk classification. Prospective studies are warranted to establish the value of the ASI algorithm for prediction of outcome in CV disease.

Physics-Based Fragment Acceleration Modeling for Pressurized Tank Burst Risk Assessments

Science.gov (United States)

Manning, Ted A.; Lawrence, Scott L.

2014-01-01

As part of comprehensive efforts to develop physics-based risk assessment techniques for space systems at NASA, coupled computational fluid and rigid body dynamic simulations were carried out to investigate the flow mechanisms that accelerate tank fragments in bursting pressurized vessels. Simulations of several configurations were compared to analyses based on the industry-standard Baker explosion model, and were used to formulate an improved version of the model. The standard model, which neglects an external fluid, was found to agree best with simulation results only in configurations where the internal-to-external pressure ratio is very high and fragment curvature is small. The improved model introduces terms that accommodate an external fluid and better account for variations based on circumferential fragment count. Physics-based analysis was critical in increasing the model's range of applicability. The improved tank burst model can be used to produce more accurate risk assessments of space vehicle failure modes that involve high-speed debris, such as exploding propellant tanks and bursting rocket engines.

Canadian population risk of radon induced lung cancer variation range assessment based on various radon risk models

International Nuclear Information System (INIS)

Chen, Jing

2017-01-01

To address public concerns regarding radon risk and variations in risk estimates based on various risk models available in the literature, lifetime lung cancer risks were calculated with five well-known risk models using more recent Canadian vital statistics (5-year averages from 2008 to 2012). Variations in population risk estimation among various models were assessed. The results showed that the Canadian population risk of radon induced lung cancer can vary from 5.0 to 17% for men and 5.1 to 18% for women based on different radon risk models. Averaged over the estimates from various risk models with better radon dosimetry, 13% of lung cancer deaths among Canadian males and 14% of lung cancer deaths among Canadian females were attributable to long-term indoor radon exposure. (authors)

Risk Assessment of Engineering Project Financing Based on PPP Model

Directory of Open Access Journals (Sweden)

Ma Qiuli

2017-01-01

Full Text Available At present, the project financing channel is single, and the urban facilities are in short supply, and the risk assessment and prevention mechanism of financing should be further improved to reduce the risk of project financing. In view of this, the fuzzy comprehensive evaluation model of project financing risk which combined the method of fuzzy comprehensive evaluation and analytic hierarchy process is established. The scientificalness and effectiveness of the model are verified by the example of the world port project in Luohe city, and it provides basis and reference for engineering project financing based on PPP mode.

Instability risk assessment of construction waste pile slope based on fuzzy entropy

Science.gov (United States)

Ma, Yong; Xing, Huige; Yang, Mao; Nie, Tingting

2018-05-01

Considering the nature and characteristics of construction waste piles, this paper analyzed the factors affecting the stability of the slope of construction waste piles, and established the system of the assessment indexes for the slope failure risks of construction waste piles. Based on the basic principles and methods of fuzzy mathematics, the factor set and the remark set were established. The membership grade of continuous factor indexes is determined using the "ridge row distribution" function, while that for the discrete factor indexes was determined by the Delphi Method. For the weight of factors, the subjective weight was determined by the Analytic Hierarchy Process (AHP) and objective weight by the entropy weight method. And the distance function was introduced to determine the combination coefficient. This paper established a fuzzy comprehensive assessment model of slope failure risks of construction waste piles, and assessed pile slopes in the two dimensions of hazard and vulnerability. The root mean square of the hazard assessment result and vulnerability assessment result was the final assessment result. The paper then used a certain construction waste pile slope as the example for analysis, assessed the risks of the four stages of a landfill, verified the assessment model and analyzed the slope's failure risks and preventive measures against a slide.

Chemical Exposure Assessment Program at Los Alamos National Laboratory: A risk based approach

International Nuclear Information System (INIS)

Stephenson, D.J.

1996-01-01

The University of California Contract And DOE Order 5480.10 require that Los Alamos National Laboratory (LANL) perform health hazard assessments/inventories of all employee workplaces. In response to this LANL has developed the Chemical Exposure Assessment Program. This program provides a systematic risk-based approach to anticipation, recognition, evaluation and control of chemical workplace exposures. Program implementation focuses resources on exposures with the highest risks for causing adverse health effects. Implementation guidance includes procedures for basic characterization, qualitative risk assessment, quantitative validation, and recommendations and reevaluation. Each component of the program is described. It is shown how a systematic method of assessment improves documentation, retrieval, and use of generated exposure information

Key outcomes from risk based assessment of pressure equipment in refineries

International Nuclear Information System (INIS)

Firth, D.; Lichti, K.; Hill, T.; Thomas, C.; Widrig, J.; Simmonds, G.; Karstensen, A.

2012-01-01

Risk based assessment (RBA) has become the best industry practice for management of pressure equipment reliability. Application of RBA programs significantly reduces risk and gives opportunity to optimize inspection programs and produce long term financial benefits. Quest Integrity Group have implemented risk based inspection programs n a variety of industries including ammonia, methanol, geothermal power, :combined cycle power, gas turbines, gas production facilities and refineries. This paper outlines the semi quantitative RBA procedures that have been followed and lists some of the specific technical outcomes. Advanced inspection and life assessment methods used in support of RBI in refineries ire discussed. Piping in refineries is a key risk issue and it is not uncommon for piping failures to result in major incidents. Specific inspection programs are available to monitor differing damage processes such as flow assisted corrosion, hydrogen damage and corrosion under insulation. During assessment it s often found that numerous pipes have never been inspected especially underground smaller diameter pipes which are frequently considered to be un-piggable using conventional technologies and difficult to inspect. Advanced high accuracy flexible miniaturized ultrasonic intelligent pigging combined with fitness for service assessment such as Invista TM is recommended for inspection of critical pipelines which previously have been un-piggable. The processing of crude oil from a range of sources can result in significant variations in the levels of contaminants such as chlorides and sulfides. Major failures have occurred as a result of very rapid increases in corrosion rates in hydrotreating processes due to rapid changes in chemistry. The outcome of the assessment of plants that have potentially high and variable levels of contaminants often results in a review the process chemistry, how it is monitored and development of a detailed corrosion monitoring program. Fired

Deterministic quantitative risk assessment development

Energy Technology Data Exchange (ETDEWEB)

Dawson, Jane; Colquhoun, Iain [PII Pipeline Solutions Business of GE Oil and Gas, Cramlington Northumberland (United Kingdom)

2009-07-01

Current risk assessment practice in pipeline integrity management is to use a semi-quantitative index-based or model based methodology. This approach has been found to be very flexible and provide useful results for identifying high risk areas and for prioritizing physical integrity assessments. However, as pipeline operators progressively adopt an operating strategy of continual risk reduction with a view to minimizing total expenditures within safety, environmental, and reliability constraints, the need for quantitative assessments of risk levels is becoming evident. Whereas reliability based quantitative risk assessments can be and are routinely carried out on a site-specific basis, they require significant amounts of quantitative data for the results to be meaningful. This need for detailed and reliable data tends to make these methods unwieldy for system-wide risk k assessment applications. This paper describes methods for estimating risk quantitatively through the calibration of semi-quantitative estimates to failure rates for peer pipeline systems. The methods involve the analysis of the failure rate distribution, and techniques for mapping the rate to the distribution of likelihoods available from currently available semi-quantitative programs. By applying point value probabilities to the failure rates, deterministic quantitative risk assessment (QRA) provides greater rigor and objectivity than can usually be achieved through the implementation of semi-quantitative risk assessment results. The method permits a fully quantitative approach or a mixture of QRA and semi-QRA to suit the operator's data availability and quality, and analysis needs. For example, consequence analysis can be quantitative or can address qualitative ranges for consequence categories. Likewise, failure likelihoods can be output as classical probabilities or as expected failure frequencies as required. (author)

RESIDUAL RISK ASSESSMENT: ETHYLENE OXIDE ...

Science.gov (United States)

This document describes the residual risk assessment for the Ethylene Oxide Commercial Sterilization source category. For stationary sources, section 112 (f) of the Clean Air Act requires EPA to assess risks to human health and the environment following implementation of technology-based control standards. If these technology-based control standards do not provide an ample margin of safety, then EPA is required to promulgate addtional standards. This document describes the methodology and results of the residual risk assessment performed for the Ethylene Oxide Commercial Sterilization source category. The results of this analyiss will assist EPA in determining whether a residual risk rule for this source category is appropriate.

[Risk Assessment and Risk Management of Chemicals in China].

Science.gov (United States)

Wang, Tie-yu; Zhou, Yun-qiao; Li, Qi-feng; Lü, Yong-long

2016-02-15

Risk assessment and risk management have been increasingly approved as an effective approach for appropriate disposal and scientific management of chemicals. This study systematically analyzed the risk assessment methods of chemicals from three aspects including health risk, ecological risk and regional risk. Based on the current situation of classification and management towards chemicals in China, a specific framework of risk management on chemicals was proposed by selecting target chemicals, predominant industries and related stakeholders as the objects. The results of the present study will provide scientific support for improving risk assessment and reasonable management of chemicals in China.

Methodology of environmental risk assessment management

Directory of Open Access Journals (Sweden)

Saša T. Bakrač

2012-04-01

Full Text Available Successful protection of environment is mostly based on high-quality assessment of potential and present risks. Environmental risk management is a complex process which includes: identification, assessment and control of risk, namely taking measures in order to minimize the risk to an acceptable level. Environmental risk management methodology: In addition to these phases in the management of environmental risk, appropriate measures that affect the reduction of risk occurrence should be implemented: - normative and legal regulations (laws and regulations, - appropriate organizational structures in society, and - establishing quality monitoring of environment. The emphasis is placed on the application of assessment methodologies (three-model concept, as the most important aspect of successful management of environmental risk. Risk assessment methodology - European concept: The first concept of ecological risk assessment methodology is based on the so-called European model-concept. In order to better understand this ecological risk assessment methodology, two concepts - hazard and risk - are introduced. The European concept of environmental risk assessment has the following phases in its implementation: identification of hazard (danger, identification of consequences (if there is hazard, estimate of the scale of consequences, estimate of consequence probability and risk assessment (also called risk characterization. The European concept is often used to assess risk in the environment as a model for addressing the distribution of stressors along the source - path - receptor line. Risk assessment methodology - Canadian concept: The second concept of the methodology of environmental risk assessment is based on the so-called Canadian model-concept. The assessment of ecological risk includes risk arising from natural events (floods, extreme weather conditions, etc., technological processes and products, agents (chemical, biological, radiological, etc

Actuarial assessment of violence risk in hospital-based partner assault clinics.

Science.gov (United States)

Hilton, N Zoe; Harris, Grant T; Holder, Norah

2008-12-01

Hospital-based partner assault clinics are a relatively recent addition to the community response to partner violence. In this study, 66% of 111 women attending hospital clinics for partner assault were physically injured and 43% reported death threats. Few concurrently used other services (shelters or police) and most relied on female friends and relatives for help. Many participants who currently lived with the perpetrator were contemplating leaving but only a third had made plans to do so. Participants faced an unusually high risk of future assault, according to both victim interview using the ODARA actuarial risk assessment and their own perceptions. Findings imply an important role for partner assault clinics and the feasibility of the victim service sector's using the same actuarial risk assessments as the criminal justice system.

A probabilistic risk assessment for field radiography based on expert judgment and opinion

International Nuclear Information System (INIS)

Jang, Han-Ki; Ryu, Hyung-Joon; Kim, Ji-Young; Lee, Jai-Ki; Cho, Kun-Woo

2011-01-01

A probabilistic approach was applied to assess radiation risk associated with the field radiography using gamma sources. The Delphi method based on the expert judgments and opinions was used in the process of characterization of parameters affecting risk, which are inevitably subject to large uncertainties. A mathematical approach applying the Bayesian inferences was employed for data processing to improve the Delphi results. This process consists of three phases: (1) setting prior distributions, (2) constructing the likelihood functions and (3) deriving the posterior distributions based on the likelihood functions. The approach for characterizing input parameters using the Bayesian inference is provided for improved risk estimates without intentional rejection of part of the data, which demonstrated utility of Bayesian updating of distributions of uncertain input parameters in PRA (Probabilistic Risk Assessment). The data analysis portion for PRA in field radiography is addressed for estimates of the parameters used to determine the frequencies and consequences of the various events modeled. In this study, radiological risks for the worker and the public member in the vicinity of the work place are estimated for field radiography system in Korea based on two-dimensional Monte Carlo Analysis (2D MCA). (author)

A Novel Dynamic Algorithm for IT Outsourcing Risk Assessment Based on Transaction Cost Theory

Directory of Open Access Journals (Sweden)

Guodong Cong

2015-01-01

Full Text Available With the great risk exposed in IT outsourcing, how to assess IT outsourcing risk becomes a critical issue. However, most of approaches to date need to further adapt to the particular complexity of IT outsourcing risk for either falling short in subjective bias, inaccuracy, or efficiency. This paper proposes a dynamic algorithm of risk assessment. It initially forwards extended three layers (risk factors, risks, and risk consequences of transferring mechanism based on transaction cost theory (TCT as the framework of risk analysis, which bridges the interconnection of components in three layers with preset transferring probability and impact. Then, it establishes an equation group between risk factors and risk consequences, which assures the “attribution” more precisely to track the specific sources that lead to certain loss. Namely, in each phase of the outsourcing lifecycle, both the likelihood and the loss of each risk factor and those of each risk are acquired through solving equation group with real data of risk consequences collected. In this “reverse” way, risk assessment becomes a responsive and interactive process with real data instead of subjective estimation, which improves the accuracy and alleviates bias in risk assessment. The numerical case proves the effectiveness of the algorithm compared with the approach forwarded by other references.

Water risk assessment in China based on the improved Water Risk Filter

Science.gov (United States)

Hong, G.; Yaqin, Q.; Qiong, L.; Cunwen, N.; Na, W.; Jiajia, L.; Jongde, G.; Na, Z.; Xiangyi, D.

2014-09-01

Finding an effective way to deal with the water crisis and the relationship between water and development is a major issue for all levels of government and different economic sectors across the world. Scientific understanding of water risk is the basis for achieving a scientific relationship between water and development, and water risk assessment is currently an important research focus. To effectively deal with the global water crisis, the World Wide Fund for Nature and German Investment and Development Company Limited proposed the concept of water risk and released an online Water Risk Filter in March 2012, which has been applied to at least 85 countries. To comprehensively and accurately reflect the situation of water risk in China, this study adjusts the water risk assessment indicators in the Water Risk Filter, taking the actual situation in China and the difficulty of obtaining the information about the indicators into account, and proposes an index system for water risk evaluation for China which consists of physical risk, regulatory risk and reputational risk. The improved Water Risk Filter is further used to assess the sources and causes of the water risks in 10 first-class and seven second-class water resource areas (WRAs). The results indicate that the water risk for the whole country is generally medium and low, while those for different regions in the country vary greatly, and those for southern regions are generally lower than those for northern regions. Government regulatory and policy implementation as well as media supervision in northern regions should be strengthened to reduce the water risk. The research results may provide decision support and references for both governments and industrial enterprises in identifying water risks, formulating prevention and control policies, and improving water resources management in China.

Water risk assessment in China based on the improved Water Risk Filter

Directory of Open Access Journals (Sweden)

G. Hong

2014-09-01

Full Text Available Finding an effective way to deal with the water crisis and the relationship between water and development is a major issue for all levels of government and different economic sectors across the world. Scientific understanding of water risk is the basis for achieving a scientific relationship between water and development, and water risk assessment is currently an important research focus. To effectively deal with the global water crisis, the World Wide Fund for Nature and German Investment and Development Company Limited proposed the concept of water risk and released an online Water Risk Filter in March 2012, which has been applied to at least 85 countries. To comprehensively and accurately reflect the situation of water risk in China, this study adjusts the water risk assessment indicators in the Water Risk Filter, taking the actual situation in China and the difficulty of obtaining the information about the indicators into account, and proposes an index system for water risk evaluation for China which consists of physical risk, regulatory risk and reputational risk. The improved Water Risk Filter is further used to assess the sources and causes of the water risks in 10 first-class and seven second-class water resource areas (WRAs. The results indicate that the water risk for the whole country is generally medium and low, while those for different regions in the country vary greatly, and those for southern regions are generally lower than those for northern regions. Government regulatory and policy implementation as well as media supervision in northern regions should be strengthened to reduce the water risk. The research results may provide decision support and references for both governments and industrial enterprises in identifying water risks, formulating prevention and control policies, and improving water resources management in China.

Bioassay-based risk assessment of complex mixtures

Energy Technology Data Exchange (ETDEWEB)

Donnelly, K.C.; Safe, S.H. [Texas A& M Univ., Houston, TX (United States); Randerath, K.; Randerath, E. [College Station and Baylor College of Medicine, Houston, TX (United States)

1994-12-31

To compare the standard chemical-based risk assessment with in vitro genotoxicity assays, two complex environmental mixtures from a wood preserving site were analyzed in the Salmonella/microsome and E. coli prophage induction assays. Using GC/MS, sample 003 was found to contain relatively low levels of polycyclic aromatic hydrocarbons (PNAs) and elevated levels of polychlorinated dibenzo-p-dioxins (PCDDs), while sample 005 had higher levels of PNAs and relatively low levels of PCDDs. The complex mixtures were sequentially extracted with methylene chloride and methanol for analysis in Salmonella, or extracted with 1:1 hexane: acetone mixture for analysis in the prophage induction assay. At a dose of 1.0 mg/plate in Salmonella strain TA98 with metabolic activation, the methanol extract of sample 003 induced 197 net revertants, while sample 005 induced 436 net revertants. In the prophage induction assay, with activation, the hexane:acetone extract of sample 003 induced a fold increase that was slightly lower than that observed with sample 005. The estimated incremental carcinogenic risk for dermal adsorption and ingestion was 1.5E-3 for sample 003, while for sample 005 the estimated risk was 1.5E-2. Thus, the sample which induced the maximum response in both bioassays also had the highest estimated cancer risk. However, the frequency of PNA-DNA adducts in both skin and liver tissues was appreciably higher with sample 005 than with sample 003.

Probabilistic safety assessment based expert systems in support of dynamic risk assessment

International Nuclear Information System (INIS)

Varde, P.V.; Sharma, U.L.; Marik, S.K.; Raina, V.K.; Tikku, A.C.

2006-01-01

Probabilistic Safety Assessment (PSA) studies are being performed, world over as part of integrated risk assessment for Nuclear Power Plants and in many cases PSA insight is utilized in support of decision making. Though the modern plants are built with inherent safety provisions, particularly to reduce the supervisory requirements during initial period into the accident, it is always desired to develop an efficient user friendly real-time operator advisory system for handling of plant transients/emergencies which would be of immense benefit for the enhancement of operational safety of the plant. This paper discusses an integrated approach for the development of operator support system. In this approach, PSA methodology and the insight obtained from PSA has been utilized for development of knowledge based or rule based experts system. While Artificial Neural Network (ANN) approach has been employed for transient identification, rule-base expert system shell environment was used for the development of diagnostic module in this system. Attempt has been made to demonstrate that this approach offers an efficient framework for addressing requirements related to handling of real-time/dynamic scenario. (author)

Approach to proliferation risk assessment based on multiple objective analysis framework

Energy Technology Data Exchange (ETDEWEB)

Andrianov, A.; Kuptsov, I. [Obninsk Institute for Nuclear Power Engineering of NNRU MEPhI (Russian Federation); Studgorodok 1, Obninsk, Kaluga region, 249030 (Russian Federation)

2013-07-01

The approach to the assessment of proliferation risk using the methods of multi-criteria decision making and multi-objective optimization is presented. The approach allows the taking into account of the specifics features of the national nuclear infrastructure, and possible proliferation strategies (motivations, intentions, and capabilities). 3 examples of applying the approach are shown. First, the approach has been used to evaluate the attractiveness of HEU (high enriched uranium)production scenarios at a clandestine enrichment facility using centrifuge enrichment technology. Secondly, the approach has been applied to assess the attractiveness of scenarios for undeclared production of plutonium or HEU by theft of materials circulating in nuclear fuel cycle facilities and thermal reactors. Thirdly, the approach has been used to perform a comparative analysis of the structures of developing nuclear power systems based on different types of nuclear fuel cycles, the analysis being based on indicators of proliferation risk.

Approach to proliferation risk assessment based on multiple objective analysis framework

International Nuclear Information System (INIS)

Andrianov, A.; Kuptsov, I.

2013-01-01

The approach to the assessment of proliferation risk using the methods of multi-criteria decision making and multi-objective optimization is presented. The approach allows the taking into account of the specifics features of the national nuclear infrastructure, and possible proliferation strategies (motivations, intentions, and capabilities). 3 examples of applying the approach are shown. First, the approach has been used to evaluate the attractiveness of HEU (high enriched uranium)production scenarios at a clandestine enrichment facility using centrifuge enrichment technology. Secondly, the approach has been applied to assess the attractiveness of scenarios for undeclared production of plutonium or HEU by theft of materials circulating in nuclear fuel cycle facilities and thermal reactors. Thirdly, the approach has been used to perform a comparative analysis of the structures of developing nuclear power systems based on different types of nuclear fuel cycles, the analysis being based on indicators of proliferation risk

Uncertainties in risk assessment at USDOE facilities

Energy Technology Data Exchange (ETDEWEB)

Hamilton, L.D.; Holtzman, S.; Meinhold, A.F.; Morris, S.C.; Rowe, M.D.

1994-01-01

The United States Department of Energy (USDOE) has embarked on an ambitious program to remediate environmental contamination at its facilities. Decisions concerning cleanup goals, choices among cleanup technologies, and funding prioritization should be largely risk-based. Risk assessments will be used more extensively by the USDOE in the future. USDOE needs to develop and refine risk assessment methods and fund research to reduce major sources of uncertainty in risk assessments at USDOE facilities. The terms{open_quote} risk assessment{close_quote} and{open_quote} risk management{close_quote} are frequently confused. The National Research Council (1983) and the United States Environmental Protection Agency (USEPA, 1991a) described risk assessment as a scientific process that contributes to risk management. Risk assessment is the process of collecting, analyzing and integrating data and information to identify hazards, assess exposures and dose responses, and characterize risks. Risk characterization must include a clear presentation of {open_quotes}... the most significant data and uncertainties...{close_quotes} in an assessment. Significant data and uncertainties are {open_quotes}...those that define and explain the main risk conclusions{close_quotes}. Risk management integrates risk assessment information with other considerations, such as risk perceptions, socioeconomic and political factors, and statutes, to make and justify decisions. Risk assessments, as scientific processes, should be made independently of the other aspects of risk management (USEPA, 1991a), but current methods for assessing health risks are based on conservative regulatory principles, causing unnecessary public concern and misallocation of funds for remediation.

Uncertainties in risk assessment at USDOE facilities

International Nuclear Information System (INIS)

Hamilton, L.D.; Holtzman, S.; Meinhold, A.F.; Morris, S.C.; Rowe, M.D.

1994-01-01

The United States Department of Energy (USDOE) has embarked on an ambitious program to remediate environmental contamination at its facilities. Decisions concerning cleanup goals, choices among cleanup technologies, and funding prioritization should be largely risk-based. Risk assessments will be used more extensively by the USDOE in the future. USDOE needs to develop and refine risk assessment methods and fund research to reduce major sources of uncertainty in risk assessments at USDOE facilities. The terms open-quote risk assessment close-quote and open-quote risk management close-quote are frequently confused. The National Research Council (1983) and the United States Environmental Protection Agency (USEPA, 1991a) described risk assessment as a scientific process that contributes to risk management. Risk assessment is the process of collecting, analyzing and integrating data and information to identify hazards, assess exposures and dose responses, and characterize risks. Risk characterization must include a clear presentation of open-quotes... the most significant data and uncertainties...close quotes in an assessment. Significant data and uncertainties are open-quotes...those that define and explain the main risk conclusionsclose quotes. Risk management integrates risk assessment information with other considerations, such as risk perceptions, socioeconomic and political factors, and statutes, to make and justify decisions. Risk assessments, as scientific processes, should be made independently of the other aspects of risk management (USEPA, 1991a), but current methods for assessing health risks are based on conservative regulatory principles, causing unnecessary public concern and misallocation of funds for remediation

Caries risk assessment in schoolchildren - a form based on Cariogram® software

Directory of Open Access Journals (Sweden)

Renata Nunes CABRAL

2014-10-01

Full Text Available Identifying caries risk factors is an important measure which contributes to best understanding of the cariogenic profile of the patient. The Cariogram® software provides this analysis, and protocols simplifying the method were suggested. Objectives: The aim of this study was to determine whether a newly developed Caries Risk Assessment (CRA form based on the Cariogram® software could classify schoolchildren according to their caries risk and to evaluate relationships between caries risk and the variables in the form. Material and Methods: 150 schoolchildren aged 5 to 7 years old were included in this survey. Caries prevalence was obtained according to International Caries Detection and Assessment System (ICDAS II. Information for filling in the form based on Cariogram® was collected clinically and from questionnaires sent to parents. Linear regression and a forward stepwise multiple regression model were applied to correlate the variables included in the form with the caries risk. Results: Caries prevalence, in primary dentition, including enamel and dentine carious lesions was 98.6%, and 77.3% when only dentine lesions were considered. Eighty-six percent of the children were classified as at moderate caries risk. The forward stepwise multiple regression model result was significant (R2=0.904; p<0.00001, showing that the most significant factors influencing caries risk were caries experience, oral hygiene, frequency of food consumption, sugar consumption and fluoride sources. Conclusion: The use of the form based on the Cariogram® software enabled classification of the schoolchildren at low, moderate and high caries risk. Caries experience, oral hygiene, frequency of food consumption, sugar consumption and fluoride sources are the variables that were shown to be highly correlated with caries risk.

Methyldibromo glutaronitrile: clinical experience and exposure-based risk assessment.

Science.gov (United States)

Zachariae, Claus; Rastogi, Suresh; Devantier, Charlotte; Menné, Torkil; Johansen, Jeanne Duus

2003-03-01

In the year 2000, the level of methyldibromo glutaronitrile (MDGN) allergy in dermatology clinics in Europe exceeded the level of allergies to all other preservatives, with a prevalence of 3.5%. In the present study, cases of primary sensitization and elicitation to MDGN due to cosmetic products were collected over an 8-month period at the Department of Dermatology, Gentofte University Hospital. The aim was to identify the products related to hand eczema, assess exposure to MDGN in these products and relate the findings to results from a newly developed updated risk assessment model for contact allergy. Out of 24 patients with a positive patch test to MDGN, 17 patients with hand eczema were identified. In 11 of these patients, cosmetic products used in relation to the onset of the disease were shown to contain MDGN (65%). In 8 of these 11 cases, primary sensitization was probable, 5 due to hand/body lotions and 3 due to lotions and/or liquid hand soap. Chemical analysis of 12 products showed that lotions contained 149-390 ppm of MDGN, liquid hand soap 144-399 ppm, a rinsing cream 293 ppm and shampoos 78-79 ppm. The shampoo exposure was not of certain relevance to the eczema. Applying the newly developed updated risk assessment model showed that the concentrations of MDGN in lotions of 149-390 ppm exceeded the calculated maximum acceptable exposure level for MDGN, which would be expected to lead to sensitization in consumers using such products, as seen in the current study. The present cases and updated exposure-based risk assessment process add to the evidence and need for re-defining safe-use concentrations of MDGN in cosmetic products.

Using an Internet-Based Breast Cancer Risk Assessment Tool to Improve Social-Cognitive Precursors of Physical Activity.

Science.gov (United States)

Fowler, Stephanie L; Klein, William M P; Ball, Linda; McGuire, Jaclyn; Colditz, Graham A; Waters, Erika A

2017-08-01

Internet-based cancer risk assessment tools might serve as a strategy for translating epidemiological risk prediction research into public health practice. Understanding how such tools affect key social-cognitive precursors of behavior change is crucial for leveraging their potential into effective interventions. To test the effects of a publicly available, Internet-based, breast cancer risk assessment tool on social-cognitive precursors of physical activity. Women (N = 132) aged 40-78 with no personal cancer history indicated their perceived risk of breast cancer and were randomly assigned to receive personalized ( www.yourdiseaserisk.wustl.edu ) or nonpersonalized breast cancer risk information. Immediately thereafter, breast cancer risk perceptions and physical activity-related behavioral intentions, self-efficacy, and response efficacy were assessed. Personalized information elicited higher intentions, self-efficacy, and response efficacy than nonpersonalized information, P values Internet-based risk assessment tools can produce beneficial effects on important social-cognitive precursors of behavior change, but lingering skepticism, possibly due to defensive processing, needs to be addressed before the effects can be maximized.

INCORPORATING NONCHEMICAL STRESSORS INTO CUMMULATIVE RISK ASSESSMENTS

Science.gov (United States)

The risk assessment paradigm has begun to shift from assessing single chemicals using "reasonable worst case" assumptions for individuals to considering multiple chemicals and community-based models. Inherent in community-based risk assessment is examination of all stressors a...

[Urban ecological risk assessment: a review].

Science.gov (United States)

Wang, Mei-E; Chen, Wei-Ping; Peng, Chi

2014-03-01

With the development of urbanization and the degradation of urban living environment, urban ecological risks caused by urbanization have attracted more and more attentions. Based on urban ecology principles and ecological risk assessment frameworks, contents of urban ecological risk assessment were reviewed in terms of driven forces, risk resources, risk receptors, endpoints and integrated approaches for risk assessment. It was suggested that types and degrees of urban economical and social activities were the driven forces for urban ecological risks. Ecological functional components at different levels in urban ecosystems as well as the urban system as a whole were the risk receptors. Assessment endpoints involved in changes of urban ecological structures, processes, functional components and the integrity of characteristic and function. Social-ecological models should be the major approaches for urban ecological risk assessment. Trends for urban ecological risk assessment study should focus on setting a definite protection target and criteria corresponding to assessment endpoints, establishing a multiple-parameter assessment system and integrative assessment approaches.

Health risk assessment based on injection of upgraded biogas in natural gas grid

International Nuclear Information System (INIS)

Leroux, C.; Modelon, H.; Rousselle, C.; Zdanevitch, I.; Evanno, S.

2010-01-01

This document presents the opinion of the French Agency for Environmental and Occupational Health Safety (AFSSET). Results are based on a collective expertise conducted to assess health risks associated with the injection of biogas in the natural gas grid. The complete assessment is published and available on the web site of the Agency; only the major results are presented in this document. Following recommendations issued by AFSSET in 2008, a new study has been initiated to collect and analyze data on the composition of biogas from sewage sludge. The French National Institute for Industrial Environment and Risks (INERIS) is in charge of this project. The data will be used to assess the accidental risks (resulting from the upgrading of biogas, transport by pipeline and utilization for energy purposes) and health risks for users (resulting from the injection in the natural gas grid). (authors)

Risk assessment for halogenated solvents

International Nuclear Information System (INIS)

Travis, C.C.

1988-01-01

A recent development in the cancer risk area is the advent of biologically based pharmacokinetic and pharmacodynamic models. These models allow for the incorporation of biological and mechanistic data into the risk assessment process. These advances will not only improve the risk assessment process for halogenated solvents but will stimulate and guide basic research in the biological area

Coronary risk assessment by point-based vs. equation-based Framingham models: significant implications for clinical care.

Science.gov (United States)

Gordon, William J; Polansky, Jesse M; Boscardin, W John; Fung, Kathy Z; Steinman, Michael A

2010-11-01

US cholesterol guidelines use original and simplified versions of the Framingham model to estimate future coronary risk and thereby classify patients into risk groups with different treatment strategies. We sought to compare risk estimates and risk group classification generated by the original, complex Framingham model and the simplified, point-based version. We assessed 2,543 subjects age 20-79 from the 2001-2006 National Health and Nutrition Examination Surveys (NHANES) for whom Adult Treatment Panel III (ATP-III) guidelines recommend formal risk stratification. For each subject, we calculated the 10-year risk of major coronary events using the original and point-based Framingham models, and then compared differences in these risk estimates and whether these differences would place subjects into different ATP-III risk groups (20% risk). Using standard procedures, all analyses were adjusted for survey weights, clustering, and stratification to make our results nationally representative. Among 39 million eligible adults, the original Framingham model categorized 71% of subjects as having "moderate" risk (20%) risk. Estimates of coronary risk by the original and point-based models often differed substantially. The point-based system classified 15% of adults (5.7 million) into different risk groups than the original model, with 10% (3.9 million) misclassified into higher risk groups and 5% (1.8 million) into lower risk groups, for a net impact of classifying 2.1 million adults into higher risk groups. These risk group misclassifications would impact guideline-recommended drug treatment strategies for 25-46% of affected subjects. Patterns of misclassifications varied significantly by gender, age, and underlying CHD risk. Compared to the original Framingham model, the point-based version misclassifies millions of Americans into risk groups for which guidelines recommend different treatment strategies.

Conceptual Framework for Trait-Based Ecological Risk Assessment for Wildlife Populations Exposed to Pesticides

Science.gov (United States)

Between screening level risk assessments and complex ecological models, a need exists for practical identification of risk based on general information about species, chemicals, and exposure scenarios. Several studies have identified demographic, biological, and toxicological fa...

Family history assessment for colorectal cancer (CRC) risk analysis - comparison of diagram- and questionnaire-based web interfaces.

Science.gov (United States)

Schultz, Michael; Seo, Steven Bohwan; Holt, Alec; Regenbrecht, Holger

2015-11-18

Colorectal cancer (CRC) has a high incidence, especially in New Zealand. The reasons for this are unknown. While most cancers develop sporadically, a positive family history, determined by the number and age at diagnosis of affected first and second degree relatives with CRC is one of the major factors, which may increase an individual's lifetime risk. Before a patient can be enrolled in a surveillance program a detailed assessment and documentation of the family history is important but time consuming and often inaccurate. The documentation is usually paper-based. Our aim was therefore to develop and validate the usability and efficacy of a web-based family history assessment tool for CRC suitable for the general population. The tool was also to calculate the risk and make a recommendation for surveillance. Two versions of an electronic assessment tool, diagram-based and questionnaire-based, were developed with the risk analysis and recommendations for surveillance based on the New Zealand Guidelines Group recommendations. Accuracy of our tool was tested prior to the study by comparing risk calculations based on family history by experienced gastroenterologists with the electronic assessment. The general public, visiting a local science fair were asked to use and comment on the usability of the two interfaces. Ninety people assessed and commented on the two interfaces. Both interfaces were effective in assessing the risk to develop CRC through their familial history for CRC. However, the questionnaire-based interface performed with significantly better satisfaction (p = 0.001) than the diagram-based interface. There was no difference in efficacy though. We conclude that a web-based questionnaire tool can assist in the accurate documentation and analysis of the family history relevant to determine the individual risk of CRC based on local guidelines. The calculator is now implemented and assessable through the web-page of a local charity for colorectal cancer

Application of Physiologically Based Pharmacokinetic Models in Chemical Risk Assessment

Directory of Open Access Journals (Sweden)

Moiz Mumtaz

2012-01-01

Full Text Available Post-exposure risk assessment of chemical and environmental stressors is a public health challenge. Linking exposure to health outcomes is a 4-step process: exposure assessment, hazard identification, dose response assessment, and risk characterization. This process is increasingly adopting “in silico” tools such as physiologically based pharmacokinetic (PBPK models to fine-tune exposure assessments and determine internal doses in target organs/tissues. Many excellent PBPK models have been developed. But most, because of their scientific sophistication, have found limited field application—health assessors rarely use them. Over the years, government agencies, stakeholders/partners, and the scientific community have attempted to use these models or their underlying principles in combination with other practical procedures. During the past two decades, through cooperative agreements and contracts at several research and higher education institutions, ATSDR funded translational research has encouraged the use of various types of models. Such collaborative efforts have led to the development and use of transparent and user-friendly models. The “human PBPK model toolkit” is one such project. While not necessarily state of the art, this toolkit is sufficiently accurate for screening purposes. Highlighted in this paper are some selected examples of environmental and occupational exposure assessments of chemicals and their mixtures.

Integration of an Evidence Base into a Probabilistic Risk Assessment Model. The Integrated Medical Model Database: An Organized Evidence Base for Assessing In-Flight Crew Health Risk and System Design

Science.gov (United States)

Saile, Lynn; Lopez, Vilma; Bickham, Grandin; FreiredeCarvalho, Mary; Kerstman, Eric; Byrne, Vicky; Butler, Douglas; Myers, Jerry; Walton, Marlei

2011-01-01

This slide presentation reviews the Integrated Medical Model (IMM) database, which is an organized evidence base for assessing in-flight crew health risk. The database is a relational database accessible to many people. The database quantifies the model inputs by a ranking based on the highest value of the data as Level of Evidence (LOE) and the quality of evidence (QOE) score that provides an assessment of the evidence base for each medical condition. The IMM evidence base has already been able to provide invaluable information for designers, and for other uses.

Review on pen-and-paper-based observational methods for assessing ergonomic risk factors of computer work.

Science.gov (United States)

Rahman, Mohd Nasrull Abdol; Mohamad, Siti Shafika

2017-01-01

Computer works are associated with Musculoskeletal Disorders (MSDs). There are several methods have been developed to assess computer work risk factor related to MSDs. This review aims to give an overview of current techniques available for pen-and-paper-based observational methods in assessing ergonomic risk factors of computer work. We searched an electronic database for materials from 1992 until 2015. The selected methods were focused on computer work, pen-and-paper observational methods, office risk factors and musculoskeletal disorders. This review was developed to assess the risk factors, reliability and validity of pen-and-paper observational method associated with computer work. Two evaluators independently carried out this review. Seven observational methods used to assess exposure to office risk factor for work-related musculoskeletal disorders were identified. The risk factors involved in current techniques of pen and paper based observational tools were postures, office components, force and repetition. From the seven methods, only five methods had been tested for reliability. They were proven to be reliable and were rated as moderate to good. For the validity testing, from seven methods only four methods were tested and the results are moderate. Many observational tools already exist, but no single tool appears to cover all of the risk factors including working posture, office component, force, repetition and office environment at office workstations and computer work. Although the most important factor in developing tool is proper validation of exposure assessment techniques, the existing observational method did not test reliability and validity. Futhermore, this review could provide the researchers with ways on how to improve the pen-and-paper-based observational method for assessing ergonomic risk factors of computer work.

Korean Ministry of Environment's web-based visual consumer product exposure and risk assessment system (COPER).

Science.gov (United States)

Lee, Hunjoo; Lee, Kiyoung; Park, Ji Young; Min, Sung-Gi

2017-05-01

With support from the Korean Ministry of the Environment (ME), our interdisciplinary research staff developed the COnsumer Product Exposure and Risk assessment system (COPER). This system includes various databases and features that enable the calculation of exposure and determination of risk caused by consumer products use. COPER is divided into three tiers: the integrated database layer (IDL), the domain specific service layer (DSSL), and the exposure and risk assessment layer (ERAL). IDL is organized by the form of the raw data (mostly non-aggregated data) and includes four sub-databases: a toxicity profile, an inventory of Korean consumer products, the weight fractions of chemical substances in the consumer products determined by chemical analysis and national representative exposure factors. DSSL provides web-based information services corresponding to each database within IDL. Finally, ERAL enables risk assessors to perform various exposure and risk assessments, including exposure scenario design via either inhalation or dermal contact by using or organizing each database in an intuitive manner. This paper outlines the overall architecture of the system and highlights some of the unique features of COPER based on visual and dynamic rendering engine for exposure assessment model on web.

Building better environmental risk assessments

Directory of Open Access Journals (Sweden)

Raymond eLayton

2015-08-01

Full Text Available Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERA for genetically modified (GM crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems – examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data, and adapting advances in risk analysis from other relevant disciplines.

Building Better Environmental Risk Assessments

Science.gov (United States)

Layton, Raymond; Smith, Joe; Macdonald, Phil; Letchumanan, Ramatha; Keese, Paul; Lema, Martin

2015-01-01

Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision-making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERAs) for genetically modified (GM) crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems – examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data), and adapting advances in risk analysis from other relevant disciplines. PMID:26301217

Building Better Environmental Risk Assessments.

Science.gov (United States)

Layton, Raymond; Smith, Joe; Macdonald, Phil; Letchumanan, Ramatha; Keese, Paul; Lema, Martin

2015-01-01

Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision-making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERAs) for genetically modified (GM) crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems - examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data), and adapting advances in risk analysis from other relevant disciplines.

Large-scale model-based assessment of deer-vehicle collision risk.

Directory of Open Access Journals (Sweden)

Torsten Hothorn

Full Text Available Ungulates, in particular the Central European roe deer Capreolus capreolus and the North American white-tailed deer Odocoileus virginianus, are economically and ecologically important. The two species are risk factors for deer-vehicle collisions and as browsers of palatable trees have implications for forest regeneration. However, no large-scale management systems for ungulates have been implemented, mainly because of the high efforts and costs associated with attempts to estimate population sizes of free-living ungulates living in a complex landscape. Attempts to directly estimate population sizes of deer are problematic owing to poor data quality and lack of spatial representation on larger scales. We used data on >74,000 deer-vehicle collisions observed in 2006 and 2009 in Bavaria, Germany, to model the local risk of deer-vehicle collisions and to investigate the relationship between deer-vehicle collisions and both environmental conditions and browsing intensities. An innovative modelling approach for the number of deer-vehicle collisions, which allows nonlinear environment-deer relationships and assessment of spatial heterogeneity, was the basis for estimating the local risk of collisions for specific road types on the scale of Bavarian municipalities. Based on this risk model, we propose a new "deer-vehicle collision index" for deer management. We show that the risk of deer-vehicle collisions is positively correlated to browsing intensity and to harvest numbers. Overall, our results demonstrate that the number of deer-vehicle collisions can be predicted with high precision on the scale of municipalities. In the densely populated and intensively used landscapes of Central Europe and North America, a model-based risk assessment for deer-vehicle collisions provides a cost-efficient instrument for deer management on the landscape scale. The measures derived from our model provide valuable information for planning road protection and defining

A Model-based Framework for Risk Assessment in Human-Computer Controlled Systems

Science.gov (United States)

Hatanaka, Iwao

2000-01-01

The rapid growth of computer technology and innovation has played a significant role in the rise of computer automation of human tasks in modem production systems across all industries. Although the rationale for automation has been to eliminate "human error" or to relieve humans from manual repetitive tasks, various computer-related hazards and accidents have emerged as a direct result of increased system complexity attributed to computer automation. The risk assessment techniques utilized for electromechanical systems are not suitable for today's software-intensive systems or complex human-computer controlled systems. This thesis will propose a new systemic model-based framework for analyzing risk in safety-critical systems where both computers and humans are controlling safety-critical functions. A new systems accident model will be developed based upon modem systems theory and human cognitive processes to better characterize system accidents, the role of human operators, and the influence of software in its direct control of significant system functions. Better risk assessments will then be achievable through the application of this new framework to complex human-computer controlled systems.

Use of traits-based bioassessment approaches in biomonitoring and ecological risk assessment

NARCIS (Netherlands)

Brink, van den P.J.; Alexander, A.; Desrosiers, M.; Goedkoop, W.; Goethals, P.L.M.; Liess, M.; Dyer, S.

2011-01-01

We discuss the application of traits-based bioassessment approaches in retrospective bioassessment as well as in prospective ecological risk assessments in regulatory frameworks. Both approaches address the interaction between species and stressors and their consequences at different levels of

Risk assessment [Chapter 9

Science.gov (United States)

Dennis S. Ojima; Louis R. Iverson; Brent L. Sohngen; James M. Vose; Christopher W. Woodall; Grant M. Domke; David L. Peterson; Jeremy S. Littell; Stephen N. Matthews; Anantha M. Prasad; Matthew P. Peters; Gary W. Yohe; Megan M. Friggens

2014-01-01

What is "risk" in the context of climate change? How can a "risk-based framework" help assess the effects of climate change and develop adaptation priorities? Risk can be described by the likelihood of an impact occurring and the magnitude of the consequences of the impact (Yohe 2010) (Fig. 9.1). High-magnitude impacts are always...

Exploration Health Risks: Probabilistic Risk Assessment

Science.gov (United States)

Rhatigan, Jennifer; Charles, John; Hayes, Judith; Wren, Kiley

2006-01-01

Maintenance of human health on long-duration exploration missions is a primary challenge to mission designers. Indeed, human health risks are currently the largest risk contributors to the risks of evacuation or loss of the crew on long-duration International Space Station missions. We describe a quantitative assessment of the relative probabilities of occurrence of the individual risks to human safety and efficiency during space flight to augment qualitative assessments used in this field to date. Quantitative probabilistic risk assessments will allow program managers to focus resources on those human health risks most likely to occur with undesirable consequences. Truly quantitative assessments are common, even expected, in the engineering and actuarial spheres, but that capability is just emerging in some arenas of life sciences research, such as identifying and minimize the hazards to astronauts during future space exploration missions. Our expectation is that these results can be used to inform NASA mission design trade studies in the near future with the objective of preventing the higher among the human health risks. We identify and discuss statistical techniques to provide this risk quantification based on relevant sets of astronaut biomedical data from short and long duration space flights as well as relevant analog populations. We outline critical assumptions made in the calculations and discuss the rationale for these. Our efforts to date have focussed on quantifying the probabilities of medical risks that are qualitatively perceived as relatively high risks of radiation sickness, cardiac dysrhythmias, medically significant renal stone formation due to increased calcium mobilization, decompression sickness as a result of EVA (extravehicular activity), and bone fracture due to loss of bone mineral density. We present these quantitative probabilities in order-of-magnitude comparison format so that relative risk can be gauged. We address the effects of

Risk based knowledge assessments: towards a toolbox for managing key knowledge assets

International Nuclear Information System (INIS)

Bright, Clive

2008-01-01

Full text: It is now well acknowledged that considerable Knowledge Management (KM) issues are faced by national and international nuclear communities. Much of these problems relate to issues of an ageing workforce and the significantly reduced influx of new generation of nuclear engineers and scientists. The management discipline of KM contains a broad spectrum of methods and techniques. However, the effective implementation of a KM strategy requires the selection and deployment of appropriate and targeted approaches that are pertinent to the particular issues of the technical or business area within an organisation. A clear strategy is contingent upon an assessment of what are the knowledge areas and what are the key (knowledge) risk areas. In particular the following issues have to be addressed: 'what knowledge exists?', 'what is the nature and format of that knowledge?' and 'what knowledge is key to our continued, safe, and effective operation?'. Answers to such questions will enable an organisation to prioritise KM effort and employ subsequent KM approaches that are appropriate. Subsequent approaches ranging from the utilisation of information technologies, such as databases; knowledge retention methods; and the setting up of Community of Practices to share knowledge and experience. This paper considers a risk assessment based approach to KM. In so doing the paper extends work previously reported on an approach to conducting knowledge audits by considering the integration of that approach with approaches to (knowledge) risk assessment. The paper also provides a brief review of the various KM approaches that can act to reduce the level of risk faced by an organisation. The paper concludes by reflecting upon the role, value of deploying such a risk based approach. (author)

Risk assessment of chemicals in food and diet: Hazard identification by methods of animal-based toxicology

DEFF Research Database (Denmark)

Barlow, S. M.; Greig, J. B.; Bridges, J. W.

2002-01-01

the current state of the science of risk assessment of chemicals in food and diet, by consideration of the four stages of risk assessment, that is. hazard identification. hazard characterisation, exposure assessment and risk characterisation. The contribution of animal-based methods in toxicology to hazard......, on hazard identification for food chemicals, such as new measurement techniques, the use of transgenic animals, assessment of hormone balance and the possibilities for conducting studies in which common human diseases have been modelled. is also considered. (C) 2002 ILSI. Published by Elsevier Science Ltd....... All rights reserved....

Risk Assessment for an Unmanned Merchant Ship

Directory of Open Access Journals (Sweden)

Ø.J. Rødseth

2015-09-01

Full Text Available The MUNIN project is doing a feasibility study on an unmanned bulk carrier on an intercontinental voyage. To develop the technical and operational concepts, MUNIN has used a risk-based design method, based on the Formal Safety Analysis method which is also recommended by the International Mari-time Organization. Scenario analysis has been used to identify risks and to simplify operational scope. Systematic hazard identification has been used to find critical safety and security risks and how to address these. Technology and operational concept testing is using a hypothesis-based test method, where the hypotheses have been created as a result of the risk assessment. Finally, the cost-benefit assessment will also use results from the risk assessment. This paper describes the risk assessment method, some of the most important results and also describes how the results have been or will be used in the different parts of the project.

Probabilistic risk assessment, Volume I

International Nuclear Information System (INIS)

Anon.

1982-01-01

This book contains 158 papers presented at the International Topical Meeting on Probabilistic Risk Assessment held by the American Nuclear Society (ANS) and the European Nuclear Society (ENS) in Port Chester, New York in 1981. The meeting was second in a series of three. The main focus of the meeting was on the safety of light water reactors. The papers discuss safety goals and risk assessment. Quantitative safety goals, risk assessment in non-nuclear technologies, and operational experience and data base are also covered. Included is an address by Dr. Chauncey Starr

The evolution of violence risk assessment.

Science.gov (United States)

Monahan, John; Skeem, Jennifer L

2014-10-01

Many instruments have been published in recent years to improve the ability of mental health clinicians to estimate the likelihood that an individual will behave violently toward others. Increasingly, these instruments are being applied in response to laws that require specialized risk assessments. In this review, we present a framework that goes beyond the "clinical" and "actuarial" dichotomy to describe a continuum of structured approaches to risk assessment. Despite differences among them, there is little evidence that one instrument predicts violence better than another. We believe that these group-based instruments are useful for assessing an individual's risk, and that the instrument should be chosen based on the purpose of the assessment.

Drought Risk Assessment based on Natural and Social Factors

Science.gov (United States)

Huang, Jing; Wang, Huimin; Han, Dawei

2015-04-01

In many parts of the world, drought hazard is becoming more frequent and severe due to climate change and human activities. It is crucial to monitor and assess drought conditions, especially for decision making support in agriculture sector. The vegetation index (VI) decreases, and the land surface temperature (LST) increases when the vegetation is under drought stress. Therefore both of these remotely sensed indices are widely used in drought monitoring and assessment. Temperature-Vegetation Dryness Index (TVDI) is obtained by establishing the feature space of the normalized difference vegetation index (NDVI) and LST, which reflects agriculture dry situation by inverting soil moisture. However, these indices only concern the natural hazard-causing factors. Our society is a complex large-scale system with various natural and social elements. The drought risk is the joint consequence of hazard-causing factors and hazard-affected bodies. For example, as the population increases, the exposure of the hazard-affected bodies also tends to increase. The high GDP enhances the response ability of government, and the irrigation and water conservancy reduces the vulnerability. Such characteristics of hazard-affected bodies should be coupled with natural factors. In this study, the 16-day moderate-resolution imaging spectroradiometer (MODIS) NDVI and LST data are combined to establish NDVI-Ts space according to different land use types in Yunnan Province, China. And then, TVDIs are calculated through dry and wet edges modeled as a linear fit to data for each land cover type. Next, the efforts are turned to establish an integrated drought assessment index of social factors and TVDI through ascertaining attribute weight based on rough sets theory. Thus, the new CDI (comprehensive drought index) recorded during spring of 2010 and the spatial variations in drought are analyzed and compared with TVDI dataset. Moreover, actual drought risk situation in the study area is given to

Toward risk assessment 2.0: Safety supervisory control and model-based hazard monitoring for risk-informed safety interventions

International Nuclear Information System (INIS)

Favarò, Francesca M.; Saleh, Joseph H.

2016-01-01

Probabilistic Risk Assessment (PRA) is a staple in the engineering risk community, and it has become to some extent synonymous with the entire quantitative risk assessment undertaking. Limitations of PRA continue to occupy researchers, and workarounds are often proposed. After a brief review of this literature, we propose to address some of PRA's limitations by developing a novel framework and analytical tools for model-based system safety, or safety supervisory control, to guide safety interventions and support a dynamic approach to risk assessment and accident prevention. Our work shifts the emphasis from the pervading probabilistic mindset in risk assessment toward the notions of danger indices and hazard temporal contingency. The framework and tools here developed are grounded in Control Theory and make use of the state-space formalism in modeling dynamical systems. We show that the use of state variables enables the definition of metrics for accident escalation, termed hazard levels or danger indices, which measure the “proximity” of the system state to adverse events, and we illustrate the development of such indices. Monitoring of the hazard levels provides diagnostic information to support both on-line and off-line safety interventions. For example, we show how the application of the proposed tools to a rejected takeoff scenario provides new insight to support pilots’ go/no-go decisions. Furthermore, we augment the traditional state-space equations with a hazard equation and use the latter to estimate the times at which critical thresholds for the hazard level are (b)reached. This estimation process provides important prognostic information and produces a proxy for a time-to-accident metric or advance notice for an impending adverse event. The ability to estimate these two hazard coordinates, danger index and time-to-accident, offers many possibilities for informing system control strategies and improving accident prevention and risk mitigation

Risk Assessment for Bridges Safety Management during Operation Based on Fuzzy Clustering Algorithm

Directory of Open Access Journals (Sweden)

Xia Hanyu

2016-01-01

Full Text Available In recent years, large span and large sea-crossing bridges are built, bridges accidents caused by improper operational management occur frequently. In order to explore the better methods for risk assessment of the bridges operation departments, the method based on fuzzy clustering algorithm is selected. Then, the implementation steps of fuzzy clustering algorithm are described, the risk evaluation system is built, and Taizhou Bridge is selected as an example, the quantitation of risk factors is described. After that, the clustering algorithm based on fuzzy equivalence is calculated on MATLAB 2010a. In the last, Taizhou Bridge operation management departments are classified and sorted according to the degree of risk, and the safety situation of operation departments is analyzed.

SPECIFIC METHOD OF RISK ASSESSMENT IN TOURISM ENTERPRISES

Directory of Open Access Journals (Sweden)

Andreea ARMEAN

2014-12-01

Full Text Available The objective of this paper is to present an innovative method of risk assessment for tourism businesses. The contribution to literature is the novelty of this method of following paths: is an ante-factum assessment not post-factum; risk assessment is based on perception rather than results; is based on specific risks tourism enterprises not on the overall risks. Is an asset-research methodology and consists in generating its own method of risk assessment based on the ideas summarized from the literature studied. The aim established is tourism enterprises from Romania. The data necessary for the application of this method will result from applying to top level management of tourism enterprises, a questionnaire about risk perception. The results from this study will help identify and measure the risks specific to tourism enterprises. The applicability of the results is to improve risk management in these enterprises.

Team based risk assessment in the South African mining industry

Energy Technology Data Exchange (ETDEWEB)

Turner, J.; Ashworth, G.; Webger, S.; Protheroe, B. [CSIR, Auckland Park (South Africa). MineRisk Africa Division

1996-12-31

Improved health and safety for the large mining workforce in South Africa is a priority. Risk Assessments will be mandatory following the promulgation of the new health and safety act, due out in mid 1996. There is also a strong demand for employee organizations for participation in regulating the work process, particularly in the aspects of health and safety. The concept of system safety is that safe production is achieved through four ingredients, being, competent and trained personnel working according to appropriate standard operating practices using fit-for-purpose equipment in a well-controlled environment. A deficiency in any one of these areas will lead to an increased chance of operating problems and consequently accidents. The Mine Risk processes for risk assessment and management provide a mechanism for adopting this concept in practical mining operations; they provide a framework for identifying the root cause of safety problems as a basis for defining changes which will contribute significantly towards improving safety. The Mine Risk processes are applied practively and systematically to identify hazards and evaluate the magnitude of the associated risk in a defined aspect of the mining operation using a participative team based approach. The team, whose membership consists of highly experienced personnel drawn from all relevant departments and from positions ranging from manager to operator, then determines practical controls to reduce priority risks to acceptable levels. Team building is a natural product of this process, and should lead to higher productivity levels which is also a cause for concern. By using this process, a number of objectives of all the stakeholders in the South African Mining industry are addressed. 3 tabs.

Risk-based environmental assessment for uranium mines – some Canadian and Australian experience

International Nuclear Information System (INIS)

Phaneuf, M.; Woods, P.; McKee, M.

2014-01-01

The uranium producing countries of Canada and Australia have independently developed regulatory frameworks emphasising the importance of human health and ecological risk assessments as core tools for ensuring protection of the environment and public. The value of such an approach is presented as well as practical lessons learned through recent applications of this regulatory model. In May 2000, the Canadian Atomic Energy Control Act was replaced by the Nuclear Safety and Control Act (NSCA). This law created the Canadian Nuclear Safety Commission, whose mission is to protect the health, safety and security of persons and the environment; and to implement Canada’s international commitments on the peaceful use of nuclear energy. From an environmental perspective, the new law added a requirement for the protection of the environment and non-human biota, and a responsibility over hazardous substances in addition to nuclear ones. The NSCA requires the prevention of unreasonable risk to, and adequate provision for the protection of, the environment and the health and safety of the public. It was decided that environmental and public protection would recognize the principles of pollution prevention and ALARA, and that it would be risk based. For Class 1 facilities and uranium mines and mills, Ecological and Human Health Risk Assessments are the core of both the Environmental Assessment process and the licensing process under the Nuclear Safety and Control Act. The Ecological Risk Assessment informs the Effluent and Environmental Monitoring Programs with the resultant monitoring data used to reinforce the risk assessments on a cyclical basis throughout the lifespan of the facility. A number of standards and regulatory documents have been completed supporting this environmental protection framework. In this presentation, a case study is used to illustrate the use of ERA for decision making. In the last decade or so in Australia uranium mining proposals normally require

An example of population-level risk assessments for small mammals using individual-based population models.

Science.gov (United States)

Schmitt, Walter; Auteri, Domenica; Bastiansen, Finn; Ebeling, Markus; Liu, Chun; Luttik, Robert; Mastitsky, Sergey; Nacci, Diane; Topping, Chris; Wang, Magnus

2016-01-01

This article presents a case study demonstrating the application of 3 individual-based, spatially explicit population models (IBMs, also known as agent-based models) in ecological risk assessments to predict long-term effects of a pesticide to populations of small mammals. The 3 IBMs each used a hypothetical fungicide (FungicideX) in different scenarios: spraying in cereals (common vole, Microtus arvalis), spraying in orchards (field vole, Microtus agrestis), and cereal seed treatment (wood mouse, Apodemus sylvaticus). Each scenario used existing model landscapes, which differed greatly in size and structural complexity. The toxicological profile of FungicideX was defined so that the deterministic long-term first tier risk assessment would result in high risk to small mammals, thus providing the opportunity to use the IBMs for risk assessment refinement (i.e., higher tier risk assessment). Despite differing internal model design and scenarios, results indicated in all 3 cases low population sensitivity unless FungicideX was applied at very high (×10) rates. Recovery from local population impacts was generally fast. Only when patch extinctions occured in simulations of intentionally high acute toxic effects, recovery periods, then determined by recolonization, were of any concern. Conclusions include recommendations for the most important input considerations, including the selection of exposure levels, duration of simulations, statistically robust number of replicates, and endpoints to report. However, further investigation and agreement are needed to develop recommendations for landscape attributes such as size, structure, and crop rotation to define appropriate regulatory risk assessment scenarios. Overall, the application of IBMs provides multiple advantages to higher tier ecological risk assessments for small mammals, including consistent and transparent direct links to specific protection goals, and the consideration of more realistic scenarios. © 2015 SETAC.

A Simplified Approach to Risk Assessment Based on System Dynamics: An Industrial Case Study.

Science.gov (United States)

Garbolino, Emmanuel; Chery, Jean-Pierre; Guarnieri, Franck

2016-01-01

Seveso plants are complex sociotechnical systems, which makes it appropriate to support any risk assessment with a model of the system. However, more often than not, this step is only partially addressed, simplified, or avoided in safety reports. At the same time, investigations have shown that the complexity of industrial systems is frequently a factor in accidents, due to interactions between their technical, human, and organizational dimensions. In order to handle both this complexity and changes in the system over time, this article proposes an original and simplified qualitative risk evaluation method based on the system dynamics theory developed by Forrester in the early 1960s. The methodology supports the development of a dynamic risk assessment framework dedicated to industrial activities. It consists of 10 complementary steps grouped into two main activities: system dynamics modeling of the sociotechnical system and risk analysis. This system dynamics risk analysis is applied to a case study of a chemical plant and provides a way to assess the technological and organizational components of safety. © 2016 Society for Risk Analysis.

The effect of Web-based Braden Scale training on the reliability and precision of Braden Scale pressure ulcer risk assessments.

Science.gov (United States)

Magnan, Morris A; Maklebust, Joann

2008-01-01

To evaluate the effect of Web-based Braden Scale training on the reliability and precision of pressure ulcer risk assessments made by registered nurses (RN) working in acute care settings. Pretest-posttest, 2-group, quasi-experimental design. Five hundred Braden Scale risk assessments were made on 102 acute care patients deemed to be at various levels of risk for pressure ulceration. Assessments were made by RNs working in acute care hospitals at 3 different medical centers where the Braden Scale was in regular daily use (2 medical centers) or new to the setting (1 medical center). The Braden Scale for Predicting Pressure Sore Risk was used to guide pressure ulcer risk assessments. A Web-based version of the Detroit Medical Center Braden Scale Computerized Training Module was used to teach nurses correct use of the Braden Scale and selection of risk-based pressure ulcer prevention interventions. In the aggregate, RN generated reliable Braden Scale pressure ulcer risk assessments 65% of the time after training. The effect of Web-based Braden Scale training on reliability and precision of assessments varied according to familiarity with the scale. With training, new users of the scale made reliable assessments 84% of the time and significantly improved precision of their assessments. The reliability and precision of Braden Scale risk assessments made by its regular users was unaffected by training. Technology-assisted Braden Scale training improved both reliability and precision of risk assessments made by new users of the scale, but had virtually no effect on the reliability or precision of risk assessments made by regular users of the instrument. Further research is needed to determine best approaches for improving reliability and precision of Braden Scale assessments made by its regular users.

On risk assessment of energy production

International Nuclear Information System (INIS)

Kunii, Katsuhiko

2005-07-01

Today we cannot ignore the risk of health and/or environment by energy production such as power generation since the risk has been made large enough. In this report an information survey has been done in order to know the outline and points of risk assessment. Based on the information of reports and literature about risk assessment, have been surveyed mainly the external cost assessment of power generation (in which quantification of health and/or environment risk has been done), in addition, risks of disasters, accidents, investments, finance etc. and impacts of those risks on social activities. The remarks obtained by the survey are as follows: 1) Some of external cost assessment of power generation show different results even if the assessment conditions of technology, site, etc. are mostly the same. It is necessary to remark on the information such as basic data, model, background, application limit of assessment considering the reliability. 2) Especially it is considered that the reliability of risk assessment is not enough at present because of the lack of basic data. (author)

Exploring the uncertainties in cancer risk assessment using the integrated probabilistic risk assessment (IPRA) approach.

Science.gov (United States)

Slob, Wout; Bakker, Martine I; Biesebeek, Jan Dirk Te; Bokkers, Bas G H

2014-08-01

Current methods for cancer risk assessment result in single values, without any quantitative information on the uncertainties in these values. Therefore, single risk values could easily be overinterpreted. In this study, we discuss a full probabilistic cancer risk assessment approach in which all the generally recognized uncertainties in both exposure and hazard assessment are quantitatively characterized and probabilistically evaluated, resulting in a confidence interval for the final risk estimate. The methodology is applied to three example chemicals (aflatoxin, N-nitrosodimethylamine, and methyleugenol). These examples illustrate that the uncertainty in a cancer risk estimate may be huge, making single value estimates of cancer risk meaningless. Further, a risk based on linear extrapolation tends to be lower than the upper 95% confidence limit of a probabilistic risk estimate, and in that sense it is not conservative. Our conceptual analysis showed that there are two possible basic approaches for cancer risk assessment, depending on the interpretation of the dose-incidence data measured in animals. However, it remains unclear which of the two interpretations is the more adequate one, adding an additional uncertainty to the already huge confidence intervals for cancer risk estimates. © 2014 Society for Risk Analysis.

Risk Assessment Method for Offshore Structure Based on Global Sensitivity Analysis

Directory of Open Access Journals (Sweden)

Zou Tao

2012-01-01

Full Text Available Based on global sensitivity analysis (GSA, this paper proposes a new risk assessment method for an offshore structure design. This method quantifies all the significances among random variables and their parameters at first. And by comparing the degree of importance, all minor factors would be negligible. Then, the global uncertainty analysis work would be simplified. Global uncertainty analysis (GUA is an effective way to study the complexity and randomness of natural events. Since field measured data and statistical results often have inevitable errors and uncertainties which lead to inaccurate prediction and analysis, the risk in the design stage of offshore structures caused by uncertainties in environmental loads, sea level, and marine corrosion must be taken into account. In this paper, the multivariate compound extreme value distribution model (MCEVD is applied to predict the extreme sea state of wave, current, and wind. The maximum structural stress and deformation of a Jacket platform are analyzed and compared with different design standards. The calculation result sufficiently demonstrates the new risk assessment method’s rationality and security.

Primary care physicians’ perspectives on computer-based health risk assessment tools for chronic diseases: a mixed methods study

Directory of Open Access Journals (Sweden)

Teja Voruganti

2015-09-01

Full Text Available Background Health risk assessment tools compute an individual’s risk of developing a disease. Routine use of such tools by primary care physicians (PCPs is potentially useful in chronic disease prevention. We sought physicians’ awareness and perceptions of the usefulness, usability and feasibility of performing assessments with computer-based risk assessment tools in primary care settings.Methods Focus groups and usability testing with a computer-based risk assessment tool were conducted with PCPs from both university-affiliated and community-based practices. Analysis was derived from grounded theory methodology.Results PCPs (n = 30 were aware of several risk assessment tools although only select tools were used routinely. The decision to use a tool depended on how use impacted practice workflow and whether the tool had credibility. Participants felt that embedding tools in the electronic medical records (EMRs system might allow for health information from the medical record to auto-populate into the tool. User comprehension of risk could also be improved with computer-based interfaces that present risk in different formats.Conclusions In this study, PCPs chose to use certain tools more regularly because of usability and credibility. Despite there being differences in the particular tools a clinical practice used, there was general appreciation for the usefulness of tools for different clinical situations. Participants characterised particular features of an ideal tool, feeling strongly that embedding risk assessment tools in the EMR would maximise accessibility and use of the tool for chronic disease management. However, appropriate practice workflow integration and features that facilitate patient understanding at point-of-care are also essential. 

Risk assessment of soil contamination criteria

International Nuclear Information System (INIS)

King, C.M.; Marter, W.L.; Montaque, D.F.; Holton, G.A.

1987-06-01

Criteria have been developed to select radioactive and nonradioactive contaminants at waste sites detailed analysis and risk assessment. These criteria were based on soil and water quality guidelines developed by various government agencies to determine if the criteria were appropriate. We performed a risk assessment of a hypothetical site which contained radioactive and nonradioactive contaminants at levels equal to the criteria values. Risks to the public from atmospheric, surface water, and groundwater exposure pathways were examined. Health risks to the public from atmospheric releases of radioactive and nonradioactive materials from a waste at soil criteria contamination levels are low. Health risks to the maximally exposed individual to chemical carcinogens are considerably below traditional EPA action levels. And health risks to the maximally exposed individual to atmospherically released radioactive contaminants is 1.88 x 10 -7 , more than a factor of 5 less than 10 -6 . Based on our atmospheric exposure pathways analysis and risk assessment, the applied soil criteria are appropriate for screening out unimportant risk contributors to human health from atmospheric exposure pathways. 13 refs., 3 figs., 7 tabs

Trajectories of Depressive Symptoms Among Web-Based Health Risk Assessment Participants.

Science.gov (United States)

Bedrosian, Richard; Hawrilenko, Matt; Cole-Lewis, Heather

2017-03-31

Health risk assessments (HRAs), which often screen for depressive symptoms, are administered to millions of employees and health plan members each year. HRA data provide an opportunity to examine longitudinal trends in depressive symptomatology, as researchers have done previously with other populations. The primary research questions were: (1) Can we observe longitudinal trajectories in HRA populations like those observed in other study samples? (2) Do HRA variables, which primarily reflect modifiable health risks, help us to identify predictors associated with these trajectories? (3) Can we make meaningful recommendations for population health management, applicable to HRA participants, based on predictors we identify? This study used growth mixture modeling (GMM) to examine longitudinal trends in depressive symptomatology among 22,963 participants in a Web-based HRA used by US employers and health plans. The HRA assessed modifiable health risks and variables such as stress, sleep, and quality of life. Five classes were identified: A "minimal depression" class (63.91%, 14,676/22,963) whose scores were consistently low across time, a "low risk" class (19.89%, 4568/22,963) whose condition remained subthreshold, a "deteriorating" class (3.15%, 705/22,963) who began at subthreshold but approached severe depression by the end of the study, a "chronic" class (4.71%, 1081/22,963) who remained highly depressed over time, and a "remitting" class (8.42%, 1933/22,963) who had moderate depression to start, but crossed into minimal depression by the end. Among those with subthreshold symptoms, individuals who were male (PInternet Research (http://www.jmir.org), 31.03.2017.

Supplier Risk Assessment Based on Best-Worst Method and K-Means Clustering: A Case Study

Directory of Open Access Journals (Sweden)

Merve Er Kara

2018-04-01

Full Text Available Supplier evaluation and selection is one of the most critical strategic decisions for developing a competitive and sustainable organization. Companies have to consider supplier related risks and threats in their purchasing decisions. In today’s competitive and risky business environment, it is very important to work with reliable suppliers. This study proposes a clustering based approach to group suppliers based on their risk profile. Suppliers of a company in the heavy-machinery sector are assessed based on 17 qualitative and quantitative risk types. The weights of the criteria are determined by using the Best-Worst method. Four factors are extracted by applying Factor Analysis to the supplier risk data. Then k-means clustering algorithm is applied to group core suppliers of the company based on the four risk factors. Three clusters are created with different risk exposure levels. The interpretation of the results provides insights for risk management actions and supplier development programs to mitigate supplier risk.

Supporting Risk Assessment: Accounting for Indirect Risk to Ecosystem Components.

Directory of Open Access Journals (Sweden)

Cathryn Clarke Murray

Full Text Available The multi-scalar complexity of social-ecological systems makes it challenging to quantify impacts from human activities on ecosystems, inspiring risk-based approaches to assessments of potential effects of human activities on valued ecosystem components. Risk assessments do not commonly include the risk from indirect effects as mediated via habitat and prey. In this case study from British Columbia, Canada, we illustrate how such "indirect risks" can be incorporated into risk assessments for seventeen ecosystem components. We ask whether (i the addition of indirect risk changes the at-risk ranking of the seventeen ecosystem components and if (ii risk scores correlate with trophic prey and habitat linkages in the food web. Even with conservative assumptions about the transfer of impacts or risks from prey species and habitats, the addition of indirect risks in the cumulative risk score changes the ranking of priorities for management. In particular, resident orca, Steller sea lion, and Pacific herring all increase in relative risk, more closely aligning these species with their "at-risk status" designations. Risk assessments are not a replacement for impact assessments, but-by considering the potential for indirect risks as we demonstrate here-they offer a crucial complementary perspective for the management of ecosystems and the organisms within.

Supporting Risk Assessment: Accounting for Indirect Risk to Ecosystem Components

Science.gov (United States)

Mach, Megan E.; Martone, Rebecca G.; Singh, Gerald G.; O, Miriam; Chan, Kai M. A.

2016-01-01

The multi-scalar complexity of social-ecological systems makes it challenging to quantify impacts from human activities on ecosystems, inspiring risk-based approaches to assessments of potential effects of human activities on valued ecosystem components. Risk assessments do not commonly include the risk from indirect effects as mediated via habitat and prey. In this case study from British Columbia, Canada, we illustrate how such “indirect risks” can be incorporated into risk assessments for seventeen ecosystem components. We ask whether (i) the addition of indirect risk changes the at-risk ranking of the seventeen ecosystem components and if (ii) risk scores correlate with trophic prey and habitat linkages in the food web. Even with conservative assumptions about the transfer of impacts or risks from prey species and habitats, the addition of indirect risks in the cumulative risk score changes the ranking of priorities for management. In particular, resident orca, Steller sea lion, and Pacific herring all increase in relative risk, more closely aligning these species with their “at-risk status” designations. Risk assessments are not a replacement for impact assessments, but—by considering the potential for indirect risks as we demonstrate here—they offer a crucial complementary perspective for the management of ecosystems and the organisms within. PMID:27632287

Evaluation of three physiologically based pharmacokinetic (PBPK) modeling tools for emergency risk assessment after acute dichloromethane exposure

NARCIS (Netherlands)

Boerleider, R. Z.; Olie, J. D N; van Eijkeren, J. C H; Bos, P. M J; Hof, B. G H; de Vries, I.; Bessems, J. G M; Meulenbelt, J.; Hunault, C. C.

2015-01-01

Introduction: Physiologically based pharmacokinetic (PBPK) models may be useful in emergency risk assessment, after acute exposure to chemicals, such as dichloromethane (DCM). We evaluated the applicability of three PBPK models for human risk assessment following a single exposure to DCM: one model

An integrated risk assessment tool for team-based periodontal disease management.

Science.gov (United States)

Thyvalikakath, Thankam P; Padman, Rema; Gupta, Sugandh

2013-01-01

Mounting evidence suggests a potential association of periodontal disease with systemic diseases such as diabetes, cardiovascular disease, cancer and stroke. The objective of this study is to develop an integrated risk assessment tool that displays a patients' risk for periodontal disease in the context of their systemic disease, social habits and oral health. Such a tool will be used by not just dental professionals but also by care providers who participate in the team-based care for chronic disease management. Displaying relationships between risk factors and its influence on the patient's general health could be a powerful educational and disease management tool for patients and clinicians. It may also improve the coordination of care provided by the provider-members of a chronic care team.

Applicability and feasibility of systematic review for performing evidence-based risk assessment in food and feed safety

DEFF Research Database (Denmark)

Aiassa, E.; Higgins, J.P.T.; Frampton, G. K.

2015-01-01

for answering questions in health care, and can be implemented to minimise biases in food and feed safety risk assessment. However, no methodological frameworks exist for refining risk assessment multi-parameter models into questions suitable for systematic review, and use of meta-analysis to estimate all......Food and feed safety risk assessment uses multi-parameter models to evaluate the likelihood of adverse events associated with exposure to hazards in human health, plant health, animal health, animal welfare and the environment. Systematic review and meta-analysis are established methods...... parameters in the risk model. This approach to planning and prioritising systematic review seems to have useful implications for producing evidence-based food and feed safety risk assessment....

Risk Assessment for Distribution Systems Using an Improved PEM-Based Method Considering Wind and Photovoltaic Power Distribution

Directory of Open Access Journals (Sweden)

Qingwu Gong

2017-03-01

Full Text Available The intermittency and variability of permeated distributed generators (DGs could cause many critical security and economy risks to distribution systems. This paper applied a certain mathematical distribution to imitate the output variability and uncertainty of DGs. Then, four risk indices—EENS (expected energy not supplied, PLC (probability of load curtailment, EFLC (expected frequency of load curtailment, and SI (severity index—were established to reflect the system risk level of the distribution system. For the certain mathematical distribution of the DGs’ output power, an improved PEM (point estimate method-based method was proposed to calculate these four system risk indices. In this improved PEM-based method, an enumeration method was used to list the states of distribution systems, and an improved PEM was developed to deal with the uncertainties of DGs, and the value of load curtailment in distribution systems was calculated by an optimal power flow algorithm. Finally, the effectiveness and advantages of this proposed PEM-based method for distribution system assessment were verified by testing a modified IEEE 30-bus system. Simulation results have shown that this proposed PEM-based method has a high computational accuracy and highly reduced computational costs compared with other risk assessment methods and is very effective for risk assessments.

A Systems-Based Risk Assessment Framework for Intentional Electromagnetic Interference (IEMI) on Critical Infrastructures.

Science.gov (United States)

Oakes, Benjamin Donald; Mattsson, Lars-Göran; Näsman, Per; Glazunov, Andrés Alayón

2018-01-03

Modern infrastructures are becoming increasingly dependent on electronic systems, leaving them more vulnerable to electrical surges or electromagnetic interference. Electromagnetic disturbances appear in nature, e.g., lightning and solar wind; however, they may also be generated by man-made technology to maliciously damage or disturb electronic equipment. This article presents a systematic risk assessment framework for identifying possible, consequential, and plausible intentional electromagnetic interference (IEMI) attacks on an arbitrary distribution network infrastructure. In the absence of available data on IEMI occurrences, we find that a systems-based risk assessment is more useful than a probabilistic approach. We therefore modify the often applied definition of risk, i.e., a set of triplets containing scenario, probability, and consequence, to a set of quadruplets: scenario, resource requirements, plausibility, and consequence. Probability is "replaced" by resource requirements and plausibility, where the former is the minimum amount and type of equipment necessary to successfully carry out an attack scenario and the latter is a subjective assessment of the extent of the existence of attackers who possess the motivation, knowledge, and resources necessary to carry out the scenario. We apply the concept of intrusion areas and classify electromagnetic source technology according to key attributes. Worst-case scenarios are identified for different quantities of attacker resources. The most plausible and consequential of these are deemed the most important scenarios and should provide useful decision support in a countermeasures effort. Finally, an example of the proposed risk assessment framework, based on notional data, is provided on a hypothetical water distribution network. © 2017 Society for Risk Analysis.

Multi-attribute risk assessment for risk ranking of natural gas pipelines

International Nuclear Information System (INIS)

Brito, A.J.; Almeida, A.T. de

2009-01-01

The paper presents a decision model for risk assessment and for risk ranking of sections of natural gas pipelines based on multi-attribute utility theory. Pipeline hazard scenarios are surveyed and the reasons for a risk assessment model based on a multi-attribute approach are presented. Three dimensions of impact and the need to translate decision-makers' preferences into risk management decisions are highlighted. The model approaches these factors by using a multi-attribute utility function, in order to produce multi-dimensional risk measurements. By using decision analysis concepts, this model quantitatively incorporates the decision-maker's preferences and behavior regarding risk within clear and consistent risk measurements. In order to support the prioritizing of critical sections of pipeline in natural gas companies, this multi-attribute model also allows sections of pipeline to be ranked into a risk hierarchy. A numerical application based on a real case study was undertaken so that the effectiveness of the decision model could be verified

A risk assessment approach to evaluating food safety based on product surveillance

NARCIS (Netherlands)

Notermans, S.; Nauta, M.J.; Jansen, J.; Jouve, J.L.; Mead, G.C.

1998-01-01

This paper outlines a risk assessment approach to food safety evaluation, which is based on testing a particular type of food, or group of similar foods, for relevant microbial pathogens. The results obtained are related to possible adverse effects on the health of consumers. The paper also gives an

FRAT-up, a Web-based fall-risk assessment tool for elderly people living in the community.

Science.gov (United States)

Cattelani, Luca; Palumbo, Pierpaolo; Palmerini, Luca; Bandinelli, Stefania; Becker, Clemens; Chesani, Federico; Chiari, Lorenzo

2015-02-18

About 30% of people over 65 are subject to at least one unintentional fall a year. Fall prevention protocols and interventions can decrease the number of falls. To be effective, a prevention strategy requires a prior step to evaluate the fall risk of the subjects. Despite extensive research, existing assessment tools for fall risk have been insufficient for predicting falls. The goal of this study is to present a novel web-based fall-risk assessment tool (FRAT-up) and to evaluate its accuracy in predicting falls, within a context of community-dwelling persons aged 65 and up. FRAT-up is based on the assumption that a subject's fall risk is given by the contribution of their exposure to each of the known fall-risk factors. Many scientific studies have investigated the relationship between falls and risk factors. The majority of these studies adopted statistical approaches, usually providing quantitative information such as odds ratios. FRAT-up exploits these numerical results to compute how each single factor contributes to the overall fall risk. FRAT-up is based on a formal ontology that enlists a number of known risk factors, together with quantitative findings in terms of odds ratios. From such information, an automatic algorithm generates a rule-based probabilistic logic program, that is, a set of rules for each risk factor. The rule-based program takes the health profile of the subject (in terms of exposure to the risk factors) and computes the fall risk. A Web-based interface allows users to input health profiles and to visualize the risk assessment for the given subject. FRAT-up has been evaluated on the InCHIANTI Study dataset, a representative population-based study of older persons living in the Chianti area (Tuscany, Italy). We compared reported falls with predicted ones and computed performance indicators. The obtained area under curve of the receiver operating characteristic was 0.642 (95% CI 0.614-0.669), while the Brier score was 0.174. The Hosmer

Hybrid data mining-regression for infrastructure risk assessment based on zero-inflated data

International Nuclear Information System (INIS)

Guikema, S.D.; Quiring, S.M.

2012-01-01

Infrastructure disaster risk assessment seeks to estimate the probability of a given customer or area losing service during a disaster, sometimes in conjunction with estimating the duration of each outage. This is often done on the basis of past data about the effects of similar events impacting the same or similar systems. In many situations this past performance data from infrastructure systems is zero-inflated; it has more zeros than can be appropriately modeled with standard probability distributions. The data are also often non-linear and exhibit threshold effects due to the complexities of infrastructure system performance. Standard zero-inflated statistical models such as zero-inflated Poisson and zero-inflated negative binomial regression models do not adequately capture these complexities. In this paper we develop a novel method that is a hybrid classification tree/regression method for complex, zero-inflated data sets. We investigate its predictive accuracy based on a large number of simulated data sets and then demonstrate its practical usefulness with an application to hurricane power outage risk assessment for a large utility based on actual data from the utility. While formulated for infrastructure disaster risk assessment, this method is promising for data-driven analysis for other situations with zero-inflated, complex data exhibiting response thresholds.

A model-based risk management framework

Energy Technology Data Exchange (ETDEWEB)

Gran, Bjoern Axel; Fredriksen, Rune

2002-08-15

The ongoing research activity addresses these issues through two co-operative activities. The first is the IST funded research project CORAS, where Institutt for energiteknikk takes part as responsible for the work package for Risk Analysis. The main objective of the CORAS project is to develop a framework to support risk assessment of security critical systems. The second, called the Halden Open Dependability Demonstrator (HODD), is established in cooperation between Oestfold University College, local companies and HRP. The objective of HODD is to provide an open-source test bed for testing, teaching and learning about risk analysis methods, risk analysis tools, and fault tolerance techniques. The Inverted Pendulum Control System (IPCON), which main task is to keep a pendulum balanced and controlled, is the first system that has been established. In order to make risk assessment one need to know what a system does, or is intended to do. Furthermore, the risk assessment requires correct descriptions of the system, its context and all relevant features. A basic assumption is that a precise model of this knowledge, based on formal or semi-formal descriptions, such as UML, will facilitate a systematic risk assessment. It is also necessary to have a framework to integrate the different risk assessment methods. The experiences so far support this hypothesis. This report presents CORAS and the CORAS model-based risk management framework, including a preliminary guideline for model-based risk assessment. The CORAS framework for model-based risk analysis offers a structured and systematic approach to identify and assess security issues of ICT systems. From the initial assessment of IPCON, we also believe that the framework is applicable in a safety context. Further work on IPCON, as well as the experiences from the CORAS trials, will provide insight and feedback for further improvements. (Author)

Environmental Risk Communication through Qualitative Risk Assessment

Directory of Open Access Journals (Sweden)

Sabre J. Coleman

2014-06-01

Full Text Available Environmental analysts are often hampered in communicating the risks of environmental contaminants due to the myriad of regulatory requirements that are applicable. The use of a qualitative, risk-based control banding strategy for assessment and control of potential environmental contaminants provides a standardized approach to improve risk communication. Presented is a model that provides an effective means for determining standardized responses and controls for common environmental issues based on the level of risk. The model is designed for integration within an occupational health and safety management system to provide a multidisciplinary environmental and occupational risk management approach. This environmental model, which utilizes multidisciplinary control banding strategies for delineating risk, complements the existing Risk Level Based Management System, a proven method in a highly regulated facility for occupational health and safety. A simplified environmental risk matrix is presented that is stratified over four risk levels. Examples of qualitative environmental control banding strategies are presented as they apply to United States regulations for construction, research activities, facility maintenance, and spill remediation that affect air, water, soil, and waste disposal. This approach offers a standardized risk communication language for multidisciplinary issues that will improve communications within and between environmental health and safety professionals, workers, and management.

Risk-based approach to long-term safety assessment for near surface disposal of radioactive waste in Korea

International Nuclear Information System (INIS)

Jeong, C.W.; Kim, K.I.; Lee, J.I.

2000-01-01

This paper presents the Korean regulatory approach to safety assessment consistent with probabilistic, risk-based long-term safety requirements for near surface disposal facilities. The approach is based on: (1) From the standpoint of risk limitation, normal processes and probabilistic disruptive events should be integrated in a similar manner in terms of potential exposures; and (2) The uncertainties inherent in the safety assessment should be reduced using appropriate exposure scenarios. In addition, this paper emphasizes the necessity of international guidance for quantifying potential exposures and the corresponding risks from radioactive waste disposal. (author)

An abuse of risk assessment: how regulatory agencies improperly adopted LNT for cancer risk assessment.

Science.gov (United States)

Calabrese, Edward J

2015-04-01

The Genetics Panel of the National Academy of Sciences' Committee on Biological Effects of Atomic Radiation (BEAR) recommended the adoption of the linear dose-response model in 1956, abandoning the threshold dose-response for genetic risk assessments. This recommendation was quickly generalized to include somatic cells for cancer risk assessment and later was instrumental in the adoption of linearity for carcinogen risk assessment by the Environmental Protection Agency. The Genetics Panel failed to provide any scientific assessment to support this recommendation and refused to do so when later challenged by other leading scientists. Thus, the linearity model used in cancer risk assessment was based on ideology rather than science and originated with the recommendation of the NAS BEAR Committee Genetics Panel. Historical documentation in support of these conclusions is provided in the transcripts of the Panel meetings and in previously unexamined correspondence among Panel members.

GAR Global Risk Assessment

Science.gov (United States)

Maskrey, Andrew; Safaie, Sahar

2015-04-01

Disaster risk management strategies, policies and actions need to be based on evidence of current disaster loss and risk patterns, past trends and future projections, and underlying risk factors. Faced with competing demands for resources, at any level it is only possible to priorities a range of disaster risk management strategies and investments with adequate understanding of realised losses, current and future risk levels and impacts on economic growth and social wellbeing as well as cost and impact of the strategy. The mapping and understanding of the global risk landscape has been greatly enhanced by the latest iteration of the GAR Global Risk Assessment and the objective of this submission is to present the GAR global risk assessment which contributed to Global Assessment Report (GAR) 2015. This initiative which has been led by UNISDR, was conducted by a consortium of technical institutions from around the world and has covered earthquake, cyclone, riverine flood, and tsunami probabilistic risk for all countries of the world. In addition, the risks associated with volcanic ash in the Asia-Pacific region, drought in various countries in sub-Saharan Africa and climate change in a number of countries have been calculated. The presentation will share thee results as well as the experience including the challenges faced in technical elements as well as the process and recommendations for the future of such endeavour.

Ecosystem services as assessment endpoints for ecological risk assessment.

Science.gov (United States)

Munns, Wayne R; Rea, Anne W; Suter, Glenn W; Martin, Lawrence; Blake-Hedges, Lynne; Crk, Tanja; Davis, Christine; Ferreira, Gina; Jordan, Steve; Mahoney, Michele; Barron, Mace G

2016-07-01

Ecosystem services are defined as the outputs of ecological processes that contribute to human welfare or have the potential to do so in the future. Those outputs include food and drinking water, clean air and water, and pollinated crops. The need to protect the services provided by natural systems has been recognized previously, but ecosystem services have not been formally incorporated into ecological risk assessment practice in a general way in the United States. Endpoints used conventionally in ecological risk assessment, derived directly from the state of the ecosystem (e.g., biophysical structure and processes), and endpoints based on ecosystem services serve different purposes. Conventional endpoints are ecologically important and susceptible entities and attributes that are protected under US laws and regulations. Ecosystem service endpoints are a conceptual and analytical step beyond conventional endpoints and are intended to complement conventional endpoints by linking and extending endpoints to goods and services with more obvious benefit to humans. Conventional endpoints can be related to ecosystem services even when the latter are not considered explicitly during problem formulation. To advance the use of ecosystem service endpoints in ecological risk assessment, the US Environmental Protection Agency's Risk Assessment Forum has added generic endpoints based on ecosystem services (ES-GEAE) to the original 2003 set of generic ecological assessment endpoints (GEAEs). Like conventional GEAEs, ES-GEAEs are defined by an entity and an attribute. Also like conventional GEAEs, ES-GEAEs are broadly described and will need to be made specific when applied to individual assessments. Adoption of ecosystem services as a type of assessment endpoint is intended to improve the value of risk assessment to environmental decision making, linking ecological risk to human well-being, and providing an improved means of communicating those risks. Integr Environ Assess Manag

Study on quantitative risk assessment model of the third party damage for natural gas pipelines based on fuzzy comprehensive assessment

International Nuclear Information System (INIS)

Qiu, Zeyang; Liang, Wei; Lin, Yang; Zhang, Meng; Wang, Xue

2017-01-01

As an important part of national energy supply system, transmission pipelines for natural gas are possible to cause serious environmental pollution, life and property loss in case of accident. The third party damage is one of the most significant causes for natural gas pipeline system accidents, and it is very important to establish an effective quantitative risk assessment model of the third party damage for reducing the number of gas pipelines operation accidents. Against the third party damage accident has the characteristics such as diversity, complexity and uncertainty, this paper establishes a quantitative risk assessment model of the third party damage based on Analytic Hierarchy Process (AHP) and Fuzzy Comprehensive Evaluation (FCE). Firstly, risk sources of third party damage should be identified exactly, and the weight of factors could be determined via improved AHP, finally the importance of each factor is calculated by fuzzy comprehensive evaluation model. The results show that the quantitative risk assessment model is suitable for the third party damage of natural gas pipelines and improvement measures could be put forward to avoid accidents based on the importance of each factor. (paper)

Generalized Fragility Relationships with Local Site Conditions for Probabilistic Performance-based Seismic Risk Assessment of Bridge Inventories

Directory of Open Access Journals (Sweden)

Sivathayalan S.

2012-01-01

Full Text Available The current practice of detailed seismic risk assessment cannot be easily applied to all the bridges in a large transportation networks due to limited resources. This paper presents a new approach for seismic risk assessment of large bridge inventories in a city or national bridge network based on the framework of probabilistic performance based seismic risk assessment. To account for the influences of local site effects, a procedure to generate site-specific hazard curves that includes seismic hazard microzonation information has been developed for seismic risk assessment of bridge inventories. Simulated ground motions compatible with the site specific seismic hazard are used as input excitations in nonlinear time history analysis of representative bridges for calibration. A normalizing procedure to obtain generalized fragility relationships in terms of structural characteristic parameters of bridge span and size and longitudinal and transverse reinforcement ratios is presented. The seismic risk of bridges in a large inventory can then be easily evaluated using the normalized fragility relationships without the requirement of carrying out detailed nonlinear time history analysis.

Risk assessment and the environment

International Nuclear Information System (INIS)

Fisk, D.J.

1992-01-01

This paper reviews the use of risk assessment techniques in the field of environment protection. I will argue that in some important instances the development of environment policy has been a source of fruitful development of a risk based methodologies. In other cases the importation of risk assessment techniques has proved much more problematic. As the scope of environmental regulation increases so does the possibility of inconsistent and arbitrary solutions to problems. The need for a more systematic approach to the development of environmental regulation has never been stronger, so it is important to understand the reasons for the mixed success of risk assessment. This applies equally to those nations with long traditions of the regulation of private sector industry and those just beginning on this course. The way ahead may be to extend our ideas of how to express risk and uncertainty. Some of the recent cause celebres of environment policy show this challenge very clearly. As an example, this paper will look at the problem of assessing the risk of man-made climate change

Risk assessment and the environment

Energy Technology Data Exchange (ETDEWEB)

Fisk, D J [Department of the Environment (United Kingdom)

1992-07-01

This paper reviews the use of risk assessment techniques in the field of environment protection. I will argue that in some important instances the development of environment policy has been a source of fruitful development of a risk based methodologies. In other cases the importation of risk assessment techniques has proved much more problematic. As the scope of environmental regulation increases so does the possibility of inconsistent and arbitrary solutions to problems. The need for a more systematic approach to the development of environmental regulation has never been stronger, so it is important to understand the reasons for the mixed success of risk assessment. This applies equally to those nations with long traditions of the regulation of private sector industry and those just beginning on this course. The way ahead may be to extend our ideas of how to express risk and uncertainty. Some of the recent cause celebres of environment policy show this challenge very clearly. As an example, this paper will look at the problem of assessing the risk of man-made climate change.

Improving risk assessment of violence among military veterans: an evidence-based approach for clinical decision-making.

Science.gov (United States)

Elbogen, Eric B; Fuller, Sara; Johnson, Sally C; Brooks, Stephanie; Kinneer, Patricia; Calhoun, Patrick S; Beckham, Jean C

2010-08-01

Increased media attention to post-deployment violence highlights the need to develop effective models to guide risk assessment among military Veterans. Ideally, a method would help identify which Veterans are most at risk for violence so that it can be determined what could be done to prevent violent behavior. This article suggests how empirical approaches to risk assessment used successfully in civilian populations can be applied to Veterans. A review was conducted of the scientific literature on Veteran populations regarding factors related to interpersonal violence generally and to domestic violence specifically. A checklist was then generated of empirically-supported risk factors for clinicians to consider in practice. To conceptualize how these known risk factors relate to a Veteran's violence potential, risk assessment scholarship was utilized to develop an evidence-based method to guide mental health professionals. The goals of this approach are to integrate science into practice, overcome logistical barriers, and permit more effective assessment, monitoring, and management of violence risk for clinicians working with Veterans, both in Department of Veteran Affairs settings and in the broader community. Research is needed to test the predictive validity of risk assessment models. Ultimately, the use of a systematic, empirical framework could lead to improved clinical decision-making in the area of risk assessment and potentially help prevent violence among Veterans. Published by Elsevier Ltd.

The issue of risk dilution in risk assessments

International Nuclear Information System (INIS)

Wilmot, R.; Robinson, P.

2004-01-01

This paper explores an issue that was first highlighted more than 20 years ago during an inquiry concerning the Sizeweli B nuclear power station in the UK. In the probabilistic safety assessment for this plant, the proponent had apparently reduced its estimates of risk by admitting to increased uncertainty about the timing of certain events. This situation is counter-intuitive, since an increase in uncertainty about the factors contributing to safety would be expected to lead to less confidence and hence to greater risk. This paradoxical situation was termed 'risk dilution' and it has been a topic of interest to reviewers of safety cases since. The recent international peer review of the Yucca Mountain performance assessments concluded that there was a potential for risk dilution in the assumptions and calculations presented. The next section describes how assumptions about the timing of events and other aspects of an assessment may lead to risk dilution, and this is followed by two examples based on recent performance assessments. The final section discusses how potential problems can be identified in safety cases, and the types of response that a regulator might adopt as a result. (authors)

Affordable, automatic quantitative fall risk assessment based on clinical balance scales and Kinect data.

Science.gov (United States)

Colagiorgio, P; Romano, F; Sardi, F; Moraschini, M; Sozzi, A; Bejor, M; Ricevuti, G; Buizza, A; Ramat, S

2014-01-01

The problem of a correct fall risk assessment is becoming more and more critical with the ageing of the population. In spite of the available approaches allowing a quantitative analysis of the human movement control system's performance, the clinical assessment and diagnostic approach to fall risk assessment still relies mostly on non-quantitative exams, such as clinical scales. This work documents our current effort to develop a novel method to assess balance control abilities through a system implementing an automatic evaluation of exercises drawn from balance assessment scales. Our aim is to overcome the classical limits characterizing these scales i.e. limited granularity and inter-/intra-examiner reliability, to obtain objective scores and more detailed information allowing to predict fall risk. We used Microsoft Kinect to record subjects' movements while performing challenging exercises drawn from clinical balance scales. We then computed a set of parameters quantifying the execution of the exercises and fed them to a supervised classifier to perform a classification based on the clinical score. We obtained a good accuracy (~82%) and especially a high sensitivity (~83%).

Enhancing the ecological risk assessment process.

Science.gov (United States)

Dale, Virginia H; Biddinger, Gregory R; Newman, Michael C; Oris, James T; Suter, Glenn W; Thompson, Timothy; Armitage, Thomas M; Meyer, Judith L; Allen-King, Richelle M; Burton, G Allen; Chapman, Peter M; Conquest, Loveday L; Fernandez, Ivan J; Landis, Wayne G; Master, Lawrence L; Mitsch, William J; Mueller, Thomas C; Rabeni, Charles F; Rodewald, Amanda D; Sanders, James G; van Heerden, Ivor L

2008-07-01

The Ecological Processes and Effects Committee of the US Environmental Protection Agency Science Advisory Board conducted a self-initiated study and convened a public workshop to characterize the state of the ecological risk assessment (ERA), with a view toward advancing the science and application of the process. That survey and analysis of ERA in decision making shows that such assessments have been most effective when clear management goals were included in the problem formulation; translated into information needs; and developed in collaboration with decision makers, assessors, scientists, and stakeholders. This process is best facilitated when risk managers, risk assessors, and stakeholders are engaged in an ongoing dialogue about problem formulation. Identification and acknowledgment of uncertainties that have the potential to profoundly affect the results and outcome of risk assessments also improves assessment effectiveness. Thus we suggest 1) through peer review of ERAs be conducted at the problem formulation stage and 2) the predictive power of risk-based decision making be expanded to reduce uncertainties through analytical and methodological approaches like life cycle analysis. Risk assessment and monitoring programs need better integration to reduce uncertainty and to evaluate risk management decision outcomes. Postdecision audit programs should be initiated to evaluate the environmental outcomes of risk-based decisions. In addition, a process should be developed to demonstrate how monitoring data can be used to reduce uncertainties. Ecological risk assessments should include the effects of chemical and nonchemical stressors at multiple levels of biological organization and spatial scale, and the extent and resolution of the pertinent scales and levels of organization should be explicitly considered during problem formulation. An approach to interpreting lines of evidence and weight of evidence is critically needed for complex assessments, and it would

Assessment and uncertainty analysis of groundwater risk.

Science.gov (United States)

Li, Fawen; Zhu, Jingzhao; Deng, Xiyuan; Zhao, Yong; Li, Shaofei

2018-01-01

Groundwater with relatively stable quantity and quality is commonly used by human being. However, as the over-mining of groundwater, problems such as groundwater funnel, land subsidence and salt water intrusion have emerged. In order to avoid further deterioration of hydrogeological problems in over-mining regions, it is necessary to conduct the assessment of groundwater risk. In this paper, risks of shallow and deep groundwater in the water intake area of the South-to-North Water Transfer Project in Tianjin, China, were evaluated. Firstly, two sets of four-level evaluation index system were constructed based on the different characteristics of shallow and deep groundwater. Secondly, based on the normalized factor values and the synthetic weights, the risk values of shallow and deep groundwater were calculated. Lastly, the uncertainty of groundwater risk assessment was analyzed by indicator kriging method. The results meet the decision maker's demand for risk information, and overcome previous risk assessment results expressed in the form of deterministic point estimations, which ignore the uncertainty of risk assessment. Copyright © 2017 Elsevier Inc. All rights reserved.

Risk assessment for transport operations

International Nuclear Information System (INIS)

Appleton, P.R.; Miles, J.C.

1990-01-01

The world-wide safety of the transport of radioactive material is based on the IAEA Transport Regulations. Risk assessment can provide quantitative data to help in the demonstration, understanding and improvement of the effectiveness of the Regulations in assuring safety. In this Paper the methodology, data and computer codes necessary and available for transport risk assessment are reviewed. Notable examples of assessments carried out over the past 15 years are briefly described along with current research, and the benefits and limitations of the techniques are discussed. (author)

Risk assessment

International Nuclear Information System (INIS)

Kinchin, G.H.

1983-01-01

After defining risk and introducing the concept of individual and societal risk, the author considers each of these, restricting considerations to risk of death. Some probabilities of death arising from various causes are quoted, and attention drawn to the care necessary in making comparisons between sets of data and to the distinction between voluntary and involuntary categories and between early and delayed deaths. The presentation of information on societal risk is discussed and examples given. The history of quantified risk assessment is outlined, particularly related to the nuclear industry, the process of assessing risk discussed: identification of hazard causes, the development of accident chains and the use of event trees, the evaluation of probability through the collection of data and their use with fault trees, and the assessment of consequences of hazards in terms of fatalities. Reference is made to the human element and common-made failures, and to studies supporting the development of reliability assessment techniques. Acceptance criteria are discussed for individual and societal risk in the nuclear field, and it is shown that proposed criteria lead to risks conservative by comparison with risks from day-to-day accidents and other potentially hazardous industries. (U.K.)

Multifactorial risk assessment for survival of abutments of removable partial dentures based on practice-based longitudinal study.

Science.gov (United States)

Tada, Sayaka; Ikebe, Kazunori; Matsuda, Ken-Ichi; Maeda, Yoshinobu

2013-12-01

Predicting the tooth survival is such a great challenge for evidence-based dentistry. To prevent further tooth loss of partially edentulous patients, estimation of individualized risk and benefit for each residual tooth is important to the clinical decision-making. While there are several reports indicating a risk of losing the abutment teeth of RPDs, there are no existing reports exploring the cause of abutment loss by multifactorial analysis. The aim of this practice-based longitudinal study was to determine the prognostic factors affecting the survival period of RPD abutments using a multifactorial risk assessment. One hundred and forty-seven patients had been previously provided with a total of 236 new RPDs at the Osaka University Dental Hospital; the 856 abutments for these RPDs were analyzed. Survival of abutment teeth was estimated using the Kaplan-Meier method. Multivariate analysis was conducted by Cox's proportional hazard modelling. The 5-year survival rates were 86.6% for direct abutments and 93.1% for indirect abutments, compared with 95.8% survival in non-abutment teeth. The multivariate analysis showed that abutment survival was significantly associated with crown-root ratio (hazard ratio (HR): 3.13), root canal treatment (HR: 2.93), pocket depth (HR: 2.51), type of abutments (HR: 2.19) and occlusal support (HR: 1.90). From this practice-based longitudinal study, we concluded that RPD abutment teeth are more likely to be lost than other residual teeth. From the multifactorial risk factor assessment, several prognostic factors, such as occlusal support, crown-root ratio, root canal treatment, and pocket depth were suggested. These results could be used to estimate the individualized risk for the residual teeth, to predict the prognosis of RPD abutments and to facilitate an evidence-based clinical decision making. Copyright © 2013 Elsevier Ltd. All rights reserved.

New approaches for improving cardiovascular risk assessment.

Science.gov (United States)

Paredes, Simão; Rocha, Teresa; Mendes, Diana; Carvalho, Paulo; Henriques, Jorge; Morais, João; Ferreira, Jorge; Mendes, Miguel

2016-01-01

Clinical guidelines recommend the use of cardiovascular risk assessment tools (risk scores) to predict the risk of events such as cardiovascular death, since these scores can aid clinical decision-making and thereby reduce the social and economic costs of cardiovascular disease (CVD). However, despite their importance, risk scores present important weaknesses that can diminish their reliability in clinical contexts. This study presents a new framework, based on current risk assessment tools, that aims to minimize these limitations. Appropriate application and combination of existing knowledge is the main focus of this work. Two different methodologies are applied: (i) a combination scheme that enables data to be extracted and processed from various sources of information, including current risk assessment tools and the contributions of the physician; and (ii) a personalization scheme based on the creation of patient groups with the purpose of identifying the most suitable risk assessment tool to assess the risk of a specific patient. Validation was performed based on a real patient dataset of 460 patients at Santa Cruz Hospital, Lisbon, Portugal, diagnosed with non-ST-segment elevation acute coronary syndrome. Promising results were obtained with both approaches, which achieved sensitivity, specificity and geometric mean of 78.79%, 73.07% and 75.87%, and 75.69%, 69.79% and 72.71%, respectively. The proposed approaches present better performances than current CVD risk scores; however, additional datasets are required to back up these findings. Copyright © 2015 Sociedade Portuguesa de Cardiologia. Published by Elsevier España. All rights reserved.

Risk Assessment of Nautical Navigational Environment Based on Grey Fixed Weight Cluster

Directory of Open Access Journals (Sweden)

Yanfei Tian

2017-06-01

Full Text Available In order to set up a mathematical model suitable for nautical navigational environment risk evaluation and systematically master the navigational environment risk characteristics of the Qiongzhou Strait in a quantitative way, a risk assessment model with approach steps is set up based on the grey fixed weight cluster (GFWC. The evaluation index system is structured scientifically through both literature review and expert investigation. The relative weight of each index is designed to be obtained via fuzzy analytic hierarchy process (FAHP; Index membership degree of every grey class is proposed to be achieved by fuzzy statistics (FS to avoid the difficulty of building whiten weight functions. By using the model, nautical navigational environment risk of the Qiongzhou Strait is determined at a “moderate” level according to the principle of maximum membership degree. The comprehensive risk evaluation of the Qiongzhou Strait nautical navigational environment can provide theoretical reference for implementing targeted risk control measures. It shows that the constructed GFWC risk assessment model as well as the presented steps are workable in case of incomplete information. The proposed strategy can excavate the collected experts’ knowledge mathematically, quantify the weight of each index and risk level, and finally lead to a comprehensive risk evaluation result. Besides, the adoptions of probability and statistic theory, fuzzy theory, aiming at solving the bottlenecks in case of uncertainty, will give the model a better adaptability and executability.

Effectiveness of a web-based health risk assessment with individually-tailored feedback on lifestyle behaviour: study protocol

Directory of Open Access Journals (Sweden)

Laan Eva K

2012-03-01

Full Text Available Abstract Background Physical inactivity, unhealthy dietary habits, smoking and high alcohol consumption are recognized risk factors for cardiovascular disease and cancer. Web-based health risk assessments with tailored feedback seem promising in promoting a healthy lifestyle. This study evaluates the effectiveness of a web-based health risk assessment with individually-tailored feedback on lifestyle behaviour, conducted in a worksite setting. Methods/Design The web-based health risk assessment starts with a questionnaire covering socio-demographic variables, family and personal medical history, lifestyle behaviour and psychological variables. Prognostic models are used to estimate individual cardiovascular risks. In case of high risk further biometric and laboratory evaluation is advised. All participants receive individually-tailored feedback on their responses to the health risk assessment questionnaire. The study uses a quasi-experimental design with a waiting list control group. Data are collected at baseline (T0 and after six months (T1. Within each company, clusters of employees are allocated to either the intervention or the control group. Primary outcome is lifestyle behaviour, expressed as the sum of five indicators namely physical activity, nutrition, smoking behaviour, alcohol consumption, and symptoms of burnout. Multilevel regression analysis will be used to answer the main research question and to correct for clustering effects. Baseline differences between the intervention and control group in the distribution of characteristics with a potential effect on lifestyle change will be taken into account in further analyses using propensity scores. Discussion This study will increase insight into the effectiveness of health risk assessments with tailored feedback and into conditions that may modify the effectiveness. This information can be used to design effective interventions for lifestyle behaviour change among employees. Trial

Risk assessment model for nuclear accident emergency protection countermeasure based on fuzzy matter-element analysis

International Nuclear Information System (INIS)

Xin Jing; Tang Huaqing; Zhang Yinghua; Zhang Limin

2009-01-01

A risk assessment model of nuclear accident emergency protection countermeasure based on fuzzy matter-element analysis and Euclid approach degree is proposed in the paper. The weight of assessed index is determined by information entropy and the scoring by experts, which could not only make full use of the inherent information of the indexes adequately, but reduce subjective assumption in the course of assessment effectively. The applied result shows that it is reasonable that the model is adopted to make risk assessment for nuclear accident emergency protective countermeasure,and it could be a kind of effective analytical method and decision making basis to choose the optimum protection countermeasure. (authors)

Risk Assessment Overview

Science.gov (United States)

Prassinos, Peter G.; Lyver, John W., IV; Bui, Chinh T.

2011-01-01

Risk assessment is used in many industries to identify and manage risks. Initially developed for use on aeronautical and nuclear systems, risk assessment has been applied to transportation, chemical, computer, financial, and security systems among others. It is used to gain an understanding of the weaknesses or vulnerabilities in a system so modification can be made to increase operability, efficiency, and safety and to reduce failure and down-time. Risk assessment results are primary inputs to risk-informed decision making; where risk information including uncertainty is used along with other pertinent information to assist management in the decision-making process. Therefore, to be useful, a risk assessment must be directed at specific objectives. As the world embraces the globalization of trade and manufacturing, understanding the associated risk become important to decision making. Applying risk assessment techniques to a global system of development, manufacturing, and transportation can provide insight into how the system can fail, the likelihood of system failure and the consequences of system failure. The risk assessment can identify those elements that contribute most to risk and identify measures to prevent and mitigate failures, disruptions, and damaging outcomes. In addition, risk associated with public and environment impact can be identified. The risk insights gained can be applied to making decisions concerning suitable development and manufacturing locations, supply chains, and transportation strategies. While risk assessment has been mostly applied to mechanical and electrical systems, the concepts and techniques can be applied across other systems and activities. This paper provides a basic overview of the development of a risk assessment.

Physicologically Based Toxicokinetic Models of Tebuconazole and Application in Human Risk Assessment

DEFF Research Database (Denmark)

Jonsdottir, Svava Osk; Reffstrup, Trine Klein; Petersen, Annette

2016-01-01

(ADME) of tebuconazole. The developed models were validated on in vivo half-life data for rabbit with good results, and on plasma and tissue concentration-time course data of tebuconazole after i.v. administration in rabbit. In most cases, the predicted concentration levels were seen to be within......A series of physiologically based toxicokinetic (PBTK) models for tebuconazole were developed in four species, rat, rabbit, rhesus monkey, and human. The developed models were analyzed with respect to the application of the models in higher tier human risk assessment, and the prospect of using...... such models in risk assessment of cumulative and aggregate exposure is discussed. Relatively simple and biologically sound models were developed using available experimental data as parameters for describing the physiology of the species, as well as the absorption, distribution, metabolism, and elimination...

IT Confidentiality Risk Assessment for an Architecture-Based Approach

NARCIS (Netherlands)

Morali, A.; Zambon, Emmanuele; Etalle, Sandro; Overbeek, Paul

2008-01-01

Information systems require awareness of risks and a good understanding of vulnerabilities and their exploitations. In this paper, we propose a novel approach for the systematic assessment and analysis of confidentiality risks caused by disclosure of operational and functional information. The

Simple estimate of the influence of competitive inhibition on PBTK based risk assessment

DEFF Research Database (Denmark)

Reffstrup, Trine Klein; Petersen, Annette; Nielsen, Elsa

2014-01-01

Background: In recent years, increased focus has been on the development of methods for assessing health risks caused by exposure to mixtures of chemicals from food and the environment. It has been recommended by international bodies to consider physiologically based toxicokinetic (PBTK) modellin...

Introduction to risk assessment

International Nuclear Information System (INIS)

Raina, V.M.

2002-01-01

This paper gives an introduction to risk assessment. It discusses the basic concepts of risk assessment, nuclear risk assessment process and products, the role of risk assessment products in nuclear safety assurance, the relationship between risk assessment and other safety analysis and risk assessment and safe operating envelope

Fault Risk Assessment of Underwater Vehicle Steering System Based on Virtual Prototyping and Monte Carlo Simulation

Directory of Open Access Journals (Sweden)

He Deyu

2016-09-01

Full Text Available Assessing the risks of steering system faults in underwater vehicles is a human-machine-environment (HME systematic safety field that studies faults in the steering system itself, the driver’s human reliability (HR and various environmental conditions. This paper proposed a fault risk assessment method for an underwater vehicle steering system based on virtual prototyping and Monte Carlo simulation. A virtual steering system prototype was established and validated to rectify a lack of historic fault data. Fault injection and simulation were conducted to acquire fault simulation data. A Monte Carlo simulation was adopted that integrated randomness due to the human operator and environment. Randomness and uncertainty of the human, machine and environment were integrated in the method to obtain a probabilistic risk indicator. To verify the proposed method, a case of stuck rudder fault (SRF risk assessment was studied. This method may provide a novel solution for fault risk assessment of a vehicle or other general HME system.

Using toxicokinetic-toxicodynamic modeling as an acute risk assessment refinement approach in vertebrate ecological risk assessment.

Science.gov (United States)

Ducrot, Virginie; Ashauer, Roman; Bednarska, Agnieszka J; Hinarejos, Silvia; Thorbek, Pernille; Weyman, Gabriel

2016-01-01

Recent guidance identified toxicokinetic-toxicodynamic (TK-TD) modeling as a relevant approach for risk assessment refinement. Yet, its added value compared to other refinement options is not detailed, and how to conduct the modeling appropriately is not explained. This case study addresses these issues through 2 examples of individual-level risk assessment for 2 hypothetical plant protection products: 1) evaluating the risk for small granivorous birds and small omnivorous mammals of a single application, as a seed treatment in winter cereals, and 2) evaluating the risk for fish after a pulsed treatment in the edge-of-field zone. Using acute test data, we conducted the first tier risk assessment as defined in the European Food Safety Authority (EFSA) guidance. When first tier risk assessment highlighted a concern, refinement options were discussed. Cases where the use of models should be preferred over other existing refinement approaches were highlighted. We then practically conducted the risk assessment refinement by using 2 different models as examples. In example 1, a TK model accounting for toxicokinetics and relevant feeding patterns in the skylark and in the wood mouse was used to predict internal doses of the hypothetical active ingredient in individuals, based on relevant feeding patterns in an in-crop situation, and identify the residue levels leading to mortality. In example 2, a TK-TD model accounting for toxicokinetics, toxicodynamics, and relevant exposure patterns in the fathead minnow was used to predict the time-course of fish survival for relevant FOCUS SW exposure scenarios and identify which scenarios might lead to mortality. Models were calibrated using available standard data and implemented to simulate the time-course of internal dose of active ingredient or survival for different exposure scenarios. Simulation results were discussed and used to derive the risk assessment refinement endpoints used for decision. Finally, we compared the

Risk-based safety indicators

International Nuclear Information System (INIS)

Sedlak, J.

2001-12-01

The report is structured as follows: 1. Risk-based safety indicators: Typology of risk-based indicators (RBIs); Tools for defining RBIs; Requirements for the PSA model; Data sources for RBIs; Types of risks monitored; RBIs and operational safety indicators; Feedback from operating experience; PSO model modification for RBIs; RBI categorization; RBI assessment; RBI applications; Suitable RBI applications. 2. Proposal for risk-based indicators: Acquiring information from operational experience; Method of acquiring safety relevance coefficients for the systems from a PSA model; Indicator definitions; On-line indicators. 3. Annex: Application of RBIs worldwide. (P.A.)

Statistically based uncertainty assessments in nuclear risk analysis

International Nuclear Information System (INIS)

Spencer, F.W.; Diegert, K.V.; Easterling, R.G.

1987-01-01

Over the last decade, the problems of estimation and uncertainty assessment in probabilistics risk assessment (PRAs) have been addressed in a variety of NRC and industry-sponsored projects. These problems have received attention because of a recognition that major uncertainties in risk estimation exist, which can be reduced by collecting more and better data and other information, and because of a recognition that better methods for assessing these uncertainties are needed. In particular, a clear understanding of the nature and magnitude of various sources of uncertainty is needed to facilitate descision-making on possible plant changes and research options. Recent PRAs have employed methods of probability propagation, sometimes involving the use of Bayes Theorem, and intended to formalize the use of ''engineering judgment'' or ''expert opinion.'' All sources, or feelings, of uncertainty are expressed probabilistically, so that uncertainty analysis becomes simply a matter of probability propagation. Alternatives to forcing a probabilistic framework at all stages of a PRA are a major concern in this paper, however

Flood Risk Assessment in Urban Areas Based on Spatial Analytics and Social Factors

Directory of Open Access Journals (Sweden)

Costas Armenakis

2017-11-01

Full Text Available Flood maps alone are not sufficient to determine and assess the risks to people, property, infrastructure, and services due to a flood event. Simply put, the risk is almost zero to minimum if the flooded region is “empty” (i.e., unpopulated, has not properties, no industry, no infrastructure, and no socio-economic activity. High spatial resolution Earth Observation (EO data can contribute to the generation and updating of flood risk maps based on several aspects including population, economic development, and critical infrastructure, which can enhance a city’s flood mitigation and preparedness planning. In this case study for the Don River watershed, Toronto, the flood risk is determined and flood risk index maps are generated by implementing a methodology for estimating risk based on the geographic coverage of the flood hazard, vulnerability of people, and the exposure of large building structures to flood water. Specifically, the spatial flood risk index maps have been generated through analytical spatial modeling which takes into account the areas in which a flood hazard is expected to occur, the terrain’s morphological characteristics, socio-economic parameters based on demographic data, and the density of large building complexes. Generated flood risk maps are verified through visual inspection with 3D city flood maps. Findings illustrate that areas of higher flood risk coincide with areas of high flood hazard and social and building exposure vulnerability.

Risk assessment for federal regulatory decisions on organisms produced through biotechnology

International Nuclear Information System (INIS)

Payne, John H.; Medley, Terry L.

1992-01-01

This article discusses: 1. Purposes and history of risk assessment: application to biotechnology; 2. Framework in the United States for decisions on organisms produced through biotechnology; 3. Choosing from among potential approaches to assessment: a). exposure assessment does not equate to risk assessment: what are the hazards?; b). Setting risk assessment priorities; c). 'Quantitative' environmental and 'quantitative' ecological risk assessments; d). Ecological risk assessments based on biological and ecological principles. 4. The bases for good regulatory decisions

Risk assessment for federal regulatory decisions on organisms produced through biotechnology

Energy Technology Data Exchange (ETDEWEB)

Payne, John H; Medley, Terry L [Biotechnology, Biologics and Environmental Protection Animal and Plant Health Inspection Service, U.S. Department of Agriculture, Hyattsville, MD (United States)

1992-07-01

This article discusses: 1. Purposes and history of risk assessment: application to biotechnology; 2. Framework in the United States for decisions on organisms produced through biotechnology; 3. Choosing from among potential approaches to assessment: a). exposure assessment does not equate to risk assessment: what are the hazards?; b). Setting risk assessment priorities; c). 'Quantitative' environmental and 'quantitative' ecological risk assessments; d). Ecological risk assessments based on biological and ecological principles. 4. The bases for good regulatory decisions.

Ecological Risk Assessment of the Southern Fujian Golden Triangle in China Based on Regional Transportation Development

Directory of Open Access Journals (Sweden)

Xinyi Yang

2018-06-01

Full Text Available Regional transportation development (RTD is an important stressor of urban agglomeration ecosystems. Groundwater recharge potential may be adversely affected when natural soil is replaced by impervious materials. To systematically identify the urban agglomeration ecological risk (UAER of RTD in the southern Fujian Golden Triangle, water regulation was used as an assessment endpoint, and RTD was considered the stressor. We used the Soil Conservation Service Curve Number method (SCS-CN to analyze the internal relationship between the assessment endpoint and the stressor factors. Then, a multi-level risk characterization method was used to show the evolutionary process of risk, and to provide a scientific basis for the management of UAER. Based on the current RTD plan, the UAER assessment shows that there is a 0.90 probability of that the risk distribution results will occur by 2030. The intensity of stress from arterial roads on the urban agglomeration ecosystem is greater than that of the railway system. By considering the development of the railway system as a factor in the stress of RTD, this study of UAER assessment differs from past studies of urban ecological risk assessment, since the latter considers only highways. We also propose a systematic method of risk assessment simulation-prediction.

Fuzzy comprehensive evaluation-based disaster risk assessment of desertification in Horqin Sand Land, China.

Science.gov (United States)

Wang, Yongfang; Zhang, Jiquan; Guo, Enliang; Sun, Zhongyi

2015-02-03

Desertification is a typical disaster risk event in which human settlements and living environments are destroyed. Desertification Disaster Risk Assessment can control and prevent the occurrence and development of desertification disasters and reduce their adverse influence on human society. This study presents the methodology and procedure for risk assessment and zoning of desertification disasters in Horqin Sand Land. Based on natural disaster risk theory and the desertification disaster formation mechanism, the Desertification Disaster Risk Index (DDRI) combined hazard, exposure, vulnerability and restorability factors and was developed mainly by using multi-source data and the fuzzy comprehensive evaluation method. The results showed that high risk and middle risk areas account for 28% and 23% of the study area, respectively. They are distributed with an "S" type in the study area. Low risk and very low risk areas account for 21% and 10% of the study area, respectively. They are distributed in the west-central and southwestern parts. Very high risk areas account for 18% of the study area and are distributed in the northeastern parts. The results can be used to know the desertification disaster risk level. It has important theoretical and practical significance to prevention and control of desertification in Horqin Sand Land and even in Northern China.

Fuzzy Comprehensive Evaluation-Based Disaster Risk Assessment of Desertification in Horqin Sand Land, China

Directory of Open Access Journals (Sweden)

Yongfang Wang

2015-02-01

Full Text Available Desertification is a typical disaster risk event in which human settlements and living environments are destroyed. Desertification Disaster Risk Assessment can control and prevent the occurrence and development of desertification disasters and reduce their adverse influence on human society. This study presents the methodology and procedure for risk assessment and zoning of desertification disasters in Horqin Sand Land. Based on natural disaster risk theory and the desertification disaster formation mechanism, the Desertification Disaster Risk Index (DDRI combined hazard, exposure, vulnerability and restorability factors and was developed mainly by using multi-source data and the fuzzy comprehensive evaluation method. The results showed that high risk and middle risk areas account for 28% and 23% of the study area, respectively. They are distributed with an “S” type in the study area. Low risk and very low risk areas account for 21% and 10% of the study area, respectively. They are distributed in the west-central and southwestern parts. Very high risk areas account for 18% of the study area and are distributed in the northeastern parts. The results can be used to know the desertification disaster risk level. It has important theoretical and practical significance to prevention and control of desertification in Horqin Sand Land and even in Northern China.

Risk assessment and model for community-based construction ...

African Journals Online (AJOL)

It, therefore, becomes necessary to systematically manage uncertainty in community-based construction in order to increase the likelihood of meeting project objectives using necessary risk management strategies. Risk management, which is an iterative process due to the dynamic nature of many risks, follows three main ...

Innovative Models of Dental Care Delivery and Coverage: Patient-Centric Dental Benefits Based on Digital Oral Health Risk Assessment.

Science.gov (United States)

Martin, John; Mills, Shannon; Foley, Mary E

2018-04-01

Innovative models of dental care delivery and coverage are emerging across oral health care systems causing changes to treatment and benefit plans. A novel addition to these models is digital risk assessment, which offers a promising new approach that incorporates the use of a cloud-based technology platform to assess an individual patient's risk for oral disease. Risk assessment changes treatment by including risk as a modifier of treatment and as a determinant of preventive services. Benefit plans are being developed to use risk assessment to predetermine preventive benefits for patients identified at elevated risk for oral disease. Copyright © 2017 Elsevier Inc. All rights reserved.

Caries risk assessment in children

DEFF Research Database (Denmark)

Twetman, S

2016-01-01

PURPOSE: To summarise the findings of recent systematic reviews (SR) covering caries risk assessment in children, updated with recent primary studies. METHODS: A search for relevant papers published 2012-2014 was conducted in electronic databases. The systematic reviews were quality assessed...... displayed a high risk of bias. CONCLUSIONS: Based on the present summary of literature, it may be concluded: (1) a caries risk assessment should be carried out at the child's first dental visit and reassessments should be done during childhood (D); (2) multivariate models display a better accuracy than...... the use of single predictors and this is especially true for preschool children (C); (3) there is no clearly superior method to predict future caries and no evidence to support the use of one model, program, or technology before the other (C); and (4) the risk category should be linked to appropriate...

Risk assessment of complex accident scenarios

International Nuclear Information System (INIS)

Kluegel, Jens-Uwe

2012-01-01

The use of methods of risk assessment in accidents in nuclear plants is based on an old tradition. The first consistent systematic study is considered to be the Rasmussen Study of the U.S. Nuclear Regulatory Commission, NRC, WASH-1400. Above and beyond the realm of nuclear technology, there is an extensive range of accident, risk and reliability research into technical-administrative systems. In the past, it has been this area of research which has led to the development of concepts of safety precautions of the type also introduced into nuclear technology (barrier concept, defense in depth, single-failure criterion), where they are now taken for granted as trivial concepts. Also for risk analysis, nuclear technology made use of methods (such as event and fault tree analyses) whose origins were outside the nuclear field. One area in which the use of traditional methods of probabilistic safety analysis is encountering practical problems is risk assessment of complex accident scenarios in nuclear technology. A definition is offered of the term 'complex accident scenarios' in nuclear technology. A number of problems are addressed which arise in the use of traditional PSA procedures in risk assessment of complex accident scenarios. Cases of complex accident scenarios are presented to demonstrate methods of risk assessment which allow robust results to be obtained even when traditional techniques of risk analysis are maintained as a matter of principle. These methods are based on the use of conditional risk metrics. (orig.)

Risk Assessment in the Maritime Industry

Directory of Open Access Journals (Sweden)

M. Mousavi

2017-02-01

Full Text Available Risk assessment is a well-developed field which many operators are currently applying to improve their operations and reduce their risk exposure. This paper is intended to provide an overview of the risk assessment for mariners in the Maritime transportation. The risks addressed are primarily those affecting the safety of a vessel, facility or operation. The concept of risk is defined, and the methods available to assess the risks associated with an operation are described. Regulatory requirements that have prompted the development of modern risk assessment practices are described, and future regulatory trends are discussed. There are many different analysis techniques and models that have been developed to aid in conducting risk assessments. A key to any successful risk analysis is choosing the right method (or combination of methods for the situation at hand. This is achieved through critical analysis of the available data concerning marine crises. This paper provides a brief introduction to some of the analysis methods available and suggests risk analysis approaches to support different types of decision making within the maritime transportation to cope with crises. Finally, as awareness of risk assessment increases, the benefits which can be realized through its application will continue to increase. Organizations in both the public and the private sector are becoming more and more familiar with the benefits associated with risk-based approaches to managing safety and consequently reducing crisis in maritime transportation.

Methodology of using CFD-based risk assessment in road tunnels

Directory of Open Access Journals (Sweden)

Vidmar Peter

2007-01-01

Full Text Available The definition of the deterministic approach in the safety analyses comes from the need to understand the conditions that come out during the fire accident in a road tunnel. The key factor of the tunnel operations during the fire is the ventilation, which during the initial fazes of the fire, impact strongly on the evacuation of people and latter on the access of the intervention units in the tunnel. The paper presents the use of the computational fluid dynamics model in the tunnel safety assessment process. The model is validated by comparing data with experimental and quantifying the differences. The set-up of the initial and boundary conditions and the requirement for grid density found during the validation tests is used to prepare three kind of fire scenarios 20 MW, 50 MW, and 100 MW, with different ventilation conditions; natural, semi transverse, full transverse, and longitudinal ventilation. The observed variables, soot density and temperature, are presented in minutes time steps trough the entire tunnel length. Comparing the obtained data in a table, allows the analyses of the ventilation conditions for different heat releases from fires. The second step is to add additional criteria of human behaviour inside the tunnel (evacuation and human resistance to the elevated gas concentrations and temperature. What comes out is a fully deterministic risk matrix that is based on the calculated data where the risk is ranged on five levels, from the lowest to a very danger level. The deterministic risk matrix represents the alternative to a probabilistic safety assessment methodology, where the fire risk is represented in detail as well as the computational fluid dynamics model results are physically correct. .

A Risk-Based Ecohydrological Approach to Assessing Environmental Flow Regimes

Science.gov (United States)

Mcgregor, Glenn B.; Marshall, Jonathan C.; Lobegeiger, Jaye S.; Holloway, Dean; Menke, Norbert; Coysh, Julie

2018-03-01

For several decades there has been recognition that water resource development alters river flow regimes and impacts ecosystem values. Determining strategies to protect or restore flow regimes to achieve ecological outcomes is a focus of water policy and legislation in many parts of the world. However, consideration of existing environmental flow assessment approaches for application in Queensland identified deficiencies precluding their adoption. Firstly, in managing flows and using ecosystem condition as an indicator of effectiveness, many approaches ignore the fact that river ecosystems are subjected to threatening processes other than flow regime alteration. Secondly, many focus on providing flows for responses without considering how often they are necessary to sustain ecological values in the long-term. Finally, few consider requirements at spatial-scales relevant to the desired outcomes, with frequent focus on individual places rather than the regions supporting sustainability. Consequently, we developed a risk-based ecohydrological approach that identifies ecosystem values linked to desired ecological outcomes, is sensitive to flow alteration and uses indicators of broader ecosystem requirements. Monitoring and research is undertaken to quantify flow-dependencies and ecological modelling is used to quantify flow-related ecological responses over an historical flow period. The relative risk from different flow management scenarios can be evaluated at relevant spatial-scales. This overcomes the deficiencies identified above and provides a robust and useful foundation upon which to build the information needed to support water planning decisions. Application of the risk assessment approach is illustrated here by two case studies.

Quantitative risk assessment of E. coli in street-vended cassava-based delicacies in the Philippines

Science.gov (United States)

Mesias, I. C. P.

2018-01-01

In the Philippines, rootcrop-based food products are gaining popularity in street food trade. However, a number of street-vended food products in the country are reported to be contaminated with E. coli posing possible risk among consumers. In this study, information on quantitative risk assessment of E. coli in street-vended cassava-based delicacies was generated. The assessment started with the prevalence and concentration of E. coli at post production in packages of the cassava-based delicacies. Combase growth predictor was used to trace the microbial population of E. coli in each step of the food chain. The @Risk software package, version 6 (Palisade USA) was used to run the simulations. Scenarios in the post-production to consumption pathway were simulated. The effect was then assessed in relation to exposure to the defined infective dose. In the worst case scenario, a minimum and most likely concentration of 6.3 and 7.8 log CFU of E. coli per serving respectively were observed. The simulation revealed that lowering the temperature in the chain considerably decreased the E. coli concentration prior to consumption and subsequently decreased the percentage of exposure to the infective dose. Exposure to infective dose however was increased with longer lag time from postproduction to consumption.

The MARINA Risk Assessment Strategy: A Flexible Strategy for Efficient Information Collection and Risk Assessment of Nanomaterials.

Science.gov (United States)

Bos, Peter M J; Gottardo, Stefania; Scott-Fordsmand, Janeck J; van Tongeren, Martie; Semenzin, Elena; Fernandes, Teresa F; Hristozov, Danail; Hund-Rinke, Kerstin; Hunt, Neil; Irfan, Muhammad-Adeel; Landsiedel, Robert; Peijnenburg, Willie J G M; Sánchez Jiménez, Araceli; van Kesteren, Petra C E; Oomen, Agnes G

2015-11-27

An engineered nanomaterial (ENM) may actually consist of a population of primary particles, aggregates and agglomerates of various sizes. Furthermore, their physico-chemical characteristics may change during the various life-cycle stages. It will probably not be feasible to test all varieties of all ENMs for possible health and environmental risks. There is therefore a need to further develop the approaches for risk assessment of ENMs. Within the EU FP7 project Managing Risks of Nanoparticles (MARINA) a two-phase risk assessment strategy has been developed. In Phase 1 (Problem framing) a base set of information is considered, relevant exposure scenarios (RESs) are identified and the scope for Phase 2 (Risk assessment) is established. The relevance of an RES is indicated by information on exposure, fate/kinetics and/or hazard; these three domains are included as separate pillars that contain specific tools. Phase 2 consists of an iterative process of risk characterization, identification of data needs and integrated collection and evaluation of data on the three domains, until sufficient information is obtained to conclude on possible risks in a RES. Only data are generated that are considered to be needed for the purpose of risk assessment. A fourth pillar, risk characterization, is defined and it contains risk assessment tools. This strategy describes a flexible and efficient approach for data collection and risk assessment which is essential to ensure safety of ENMs. Further developments are needed to provide guidance and make the MARINA Risk Assessment Strategy operational. Case studies will be needed to refine the strategy.

The MARINA Risk Assessment Strategy: A Flexible Strategy for Efficient Information Collection and Risk Assessment of Nanomaterials

Directory of Open Access Journals (Sweden)

Peter M. J. Bos

2015-11-01

Full Text Available An engineered nanomaterial (ENM may actually consist of a population of primary particles, aggregates and agglomerates of various sizes. Furthermore, their physico-chemical characteristics may change during the various life-cycle stages. It will probably not be feasible to test all varieties of all ENMs for possible health and environmental risks. There is therefore a need to further develop the approaches for risk assessment of ENMs. Within the EU FP7 project Managing Risks of Nanoparticles (MARINA a two-phase risk assessment strategy has been developed. In Phase 1 (Problem framing a base set of information is considered, relevant exposure scenarios (RESs are identified and the scope for Phase 2 (Risk assessment is established. The relevance of an RES is indicated by information on exposure, fate/kinetics and/or hazard; these three domains are included as separate pillars that contain specific tools. Phase 2 consists of an iterative process of risk characterization, identification of data needs and integrated collection and evaluation of data on the three domains, until sufficient information is obtained to conclude on possible risks in a RES. Only data are generated that are considered to be needed for the purpose of risk assessment. A fourth pillar, risk characterization, is defined and it contains risk assessment tools. This strategy describes a flexible and efficient approach for data collection and risk assessment which is essential to ensure safety of ENMs. Further developments are needed to provide guidance and make the MARINA Risk Assessment Strategy operational. Case studies will be needed to refine the strategy.

Identifying and Mitigating the Impact of the Budget Control Act on High Risk Sectors and Tiers of the Defense Industrial Base: Assessment Approach to Industrial Base Risks

Science.gov (United States)

2016-04-30

Ü~åÖÉ= - 351 - products, similar to those found in a bill of material. Figure 3 provides an example of the relationship between sectors , sub- sectors ...defense aircraft. Defense aircraft are divided in three main sub- sectors : fixed-wing, rotary wing, and unmanned systems. The fixed-wing sub- sector ...Risk Sectors and Tiers of the Defense Industrial Base: Assessment Approach to Industrial Base Risks Lirio Avilés, Engineer, MIBP, OUSD(AT&L) Sally

RBCA-based approaches to ecological risk assessment for TPH-contaminated areas

International Nuclear Information System (INIS)

Hummell, R.; Vedagiri, U.

1995-01-01

The RBCA guidelines proposed by ASTM form an evaluation and decision-making framework for sites potentially contaminated by petroleum releases. They present a three-tiered approach of decreasing conservatism and increasing site-specificity that primarily evaluates risks to human health. While RBCA includes consideration of environmental impacts, there are no specific recommendations on how this is to be achieved. A RBCA-based ecological risk assessment approach was developed for TPH-contaminated areas in Alaska. The approach presents a habitat-based selection process for surrogate chemicals and indicator chemicals of ecological relevance, evaluation of ecotoxicity, derivation of matrix-specific Tier 1 RBSLs (including soils) and determination of Tier 2 and 3 SSTLS. Chemicals are considered by class, aquatic (freshwater and saltwater) and terrestrial habitats are evaluated independently, and chemical concentrations are screened in all media of concern (air, soil, water, sediment). Data needs and decision points specific to ecological receptors are identified for each tier of the approach. Other aspects of the approach include consideration of contaminant migration pathways and habitats that are typical of Arctic conditions. Areas where ecological and human risk concerns may overlap are identified

Uncertainty quantification in flood risk assessment

Science.gov (United States)

Blöschl, Günter; Hall, Julia; Kiss, Andrea; Parajka, Juraj; Perdigão, Rui A. P.; Rogger, Magdalena; Salinas, José Luis; Viglione, Alberto

2017-04-01

Uncertainty is inherent to flood risk assessments because of the complexity of the human-water system, which is characterised by nonlinearities and interdependencies, because of limited knowledge about system properties and because of cognitive biases in human perception and decision-making. On top of the uncertainty associated with the assessment of the existing risk to extreme events, additional uncertainty arises because of temporal changes in the system due to climate change, modifications of the environment, population growth and the associated increase in assets. Novel risk assessment concepts are needed that take into account all these sources of uncertainty. They should be based on the understanding of how flood extremes are generated and how they change over time. They should also account for the dynamics of risk perception of decision makers and population in the floodplains. In this talk we discuss these novel risk assessment concepts through examples from Flood Frequency Hydrology, Socio-Hydrology and Predictions Under Change. We believe that uncertainty quantification in flood risk assessment should lead to a robust approach of integrated flood risk management aiming at enhancing resilience rather than searching for optimal defense strategies.

Risk-based assessment of the surety of information systems

Energy Technology Data Exchange (ETDEWEB)

Jansma, R.M.; Fletcher, S.K.; Murphy, M.D.; Lim, J.J.; Wyss, G.D.

1996-07-01

When software is used in safety-critical, security-critical, or mission-critical situations, it is imperative to understand and manage the risks involved. A risk assessment methodology and toolset have been developed which are specific to software systems and address a broad range of risks including security, safety, and correct operation. A unique aspect of this methodology is the use of a modeling technique that captures interactions and tradeoffs among risk mitigators. This paper describes the concepts and components of the methodology and presents its application to example systems.

Biomechanical rupture risk assessment of abdominal aortic aneurysms based on a novel probabilistic rupture risk index.

Science.gov (United States)

Polzer, Stanislav; Gasser, T Christian

2015-12-06

A rupture risk assessment is critical to the clinical treatment of abdominal aortic aneurysm (AAA) patients. The biomechanical AAA rupture risk assessment quantitatively integrates many known AAA rupture risk factors but the variability of risk predictions due to model input uncertainties remains a challenging limitation. This study derives a probabilistic rupture risk index (PRRI). Specifically, the uncertainties in AAA wall thickness and wall strength were considered, and wall stress was predicted with a state-of-the-art deterministic biomechanical model. The discriminative power of PRRI was tested in a diameter-matched cohort of ruptured (n = 7) and intact (n = 7) AAAs and compared to alternative risk assessment methods. Computed PRRI at 1.5 mean arterial pressure was significantly (p = 0.041) higher in ruptured AAAs (20.21(s.d. 14.15%)) than in intact AAAs (3.71(s.d. 5.77)%). PRRI showed a high sensitivity and specificity (discriminative power of 0.837) to discriminate between ruptured and intact AAA cases. The underlying statistical representation of stochastic data of wall thickness, wall strength and peak wall stress had only negligible effects on PRRI computations. Uncertainties in AAA wall stress predictions, the wide range of reported wall strength and the stochastic nature of failure motivate a probabilistic rupture risk assessment. Advanced AAA biomechanical modelling paired with a probabilistic rupture index definition as known from engineering risk assessment seems to be superior to a purely deterministic approach. © 2015 The Author(s).

Operational risk assessment.

Science.gov (United States)

McKim, Vicky L

2017-06-01

In the world of risk management, which encompasses the business continuity disciplines, many types of risk require evaluation. Financial risk is most often the primary focus, followed by product and market risks. Another critical area, which typically lacks a thorough review or may be overlooked, is operational risk. This category encompasses many risk exposure types including those around building structures and systems, environmental issues, nature, neighbours, clients, regulatory compliance, network, data security and so on. At times, insurance carriers will assess internal hazards, but seldom do these assessments include more than a cursory look at other types of operational risk. In heavily regulated environments, risk assessments are required but may not always include thorough assessments of operational exposures. Vulnerabilities may linger or go unnoticed, only to become the catalyst for a business disruption at a later time, some of which are so severe that business recovery becomes nearly impossible. Businesses may suffer loss of clients as the result of a prolonged disruption of services. Comprehensive operational risk assessments can assist in identifying such vulnerabilities, exposures and threats so that the risk can be minimised or removed. This paper lays out how an assessment of this type can be successfully conducted.

Fall Risk Assessment Through Automatic Combination of Clinical Fall Risk Factors and Body-Worn Sensor Data.

Science.gov (United States)

Greene, Barry R; Redmond, Stephen J; Caulfield, Brian

2017-05-01

Falls are the leading global cause of accidental death and disability in older adults and are the most common cause of injury and hospitalization. Accurate, early identification of patients at risk of falling, could lead to timely intervention and a reduction in the incidence of fall-related injury and associated costs. We report a statistical method for fall risk assessment using standard clinical fall risk factors (N = 748). We also report a means of improving this method by automatically combining it, with a fall risk assessment algorithm based on inertial sensor data and the timed-up-and-go test. Furthermore, we provide validation data on the sensor-based fall risk assessment method using a statistically independent dataset. Results obtained using cross-validation on a sample of 292 community dwelling older adults suggest that a combined clinical and sensor-based approach yields a classification accuracy of 76.0%, compared to either 73.6% for sensor-based assessment alone, or 68.8% for clinical risk factors alone. Increasing the cohort size by adding an additional 130 subjects from a separate recruitment wave (N = 422), and applying the same model building and validation method, resulted in a decrease in classification performance (68.5% for combined classifier, 66.8% for sensor data alone, and 58.5% for clinical data alone). This suggests that heterogeneity between cohorts may be a major challenge when attempting to develop fall risk assessment algorithms which generalize well. Independent validation of the sensor-based fall risk assessment algorithm on an independent cohort of 22 community dwelling older adults yielded a classification accuracy of 72.7%. Results suggest that the present method compares well to previously reported sensor-based fall risk assessment methods in assessing falls risk. Implementation of objective fall risk assessment methods on a large scale has the potential to improve quality of care and lead to a reduction in associated hospital

Risk assessment: An employer's perspective

International Nuclear Information System (INIS)

Williams, K.C.

1992-01-01

There is no question that a careful assessment of risk is essential for safe industrial operations. For that reason, a thoughtful analysis of the effectiveness of available risk assessment technologies is prerequisite for responsible corporate decision making. An 'employer's' perspective on risk assessment cannot be constrained by any artificial restrictions which that term may imply. In reality, all those who are involved in the execution of an industrial enterprise: managers, regulators, the affected public, and especially those employees exposed to hazards, are necessarily partners in assessment of risk. The perspective of this paper is that of the oil and gas industry, in which the author's organization, Exxon Company, International, participates. The paper addresses what Exxon requires to assess and manage risk in its worldwide operations. The author is aware, however, through contacts with industry colleagues, that some of Exxon's initiatives are representative of similar actions being taken by others. 1992 is the European Year of Safety, Health and Hygiene, coinciding with the United Kingdom's Presidency of the European Council. It is also the year in which new 'goal-setting' regulations covering safety in the U.K. offshore oil industry were put forward by the Health and Safety Commission. These regulations, based largely on Lord Cullen's recommendations following the Piper Alpha tragedy, set the pace for safety in the British North Sea and will significantly impact the safety of offshore oil installations worldwide. The requirement for risk assessment, using a systematic process of analysing and evaluating risk, is a key component of this safety regime

Risk assessment: An employer's perspective

Energy Technology Data Exchange (ETDEWEB)

Williams, K C [Exxon International (United States)

1992-07-01

There is no question that a careful assessment of risk is essential for safe industrial operations. For that reason, a thoughtful analysis of the effectiveness of available risk assessment technologies is prerequisite for responsible corporate decision making. An 'employer's' perspective on risk assessment cannot be constrained by any artificial restrictions which that term may imply. In reality, all those who are involved in the execution of an industrial enterprise: managers, regulators, the affected public, and especially those employees exposed to hazards, are necessarily partners in assessment of risk. The perspective of this paper is that of the oil and gas industry, in which the author's organization, Exxon Company, International, participates. The paper addresses what Exxon requires to assess and manage risk in its worldwide operations. The author is aware, however, through contacts with industry colleagues, that some of Exxon's initiatives are representative of similar actions being taken by others. 1992 is the European Year of Safety, Health and Hygiene, coinciding with the United Kingdom's Presidency of the European Council. It is also the year in which new 'goal-setting' regulations covering safety in the U.K. offshore oil industry were put forward by the Health and Safety Commission. These regulations, based largely on Lord Cullen's recommendations following the Piper Alpha tragedy, set the pace for safety in the British North Sea and will significantly impact the safety of offshore oil installations worldwide. The requirement for risk assessment, using a systematic process of analysing and evaluating risk, is a key component of this safety regime.

Development of Integrated Assessment Technology of Risk and Performance

International Nuclear Information System (INIS)

Yang, Jun Eon; Kang, Dae Il; Kang, Hyun Gook

2010-04-01

The main idea and contents are summarized as below 1) Development of new risk/performance assessment system innovating old labor-intensive risk assessment structure - New consolidated risk assessment technology from various hazard(flood, fire, seismic in NPP) - BOP model development for performance monitoring - Consolidated risk/performance management system for consistency and efficiency of NPP 2) Resolution technology for pending issues in PSA - Base technology for PSA of digital I and C system - Base technology for seismic PSA reflecting domestic seismic characteristics and aging effect - Uncertainty reduction technology for level 2 PSA and best estimation of containment failure frequency 3) Next generation risk/performance assessment technology - Human-induced error reduction technology for efficient operation of a NPP

Risk assessment of security systems based on entropy theory and the Neyman–Pearson criterion

International Nuclear Information System (INIS)

Lv, Haitao; Yin, Chao; Cui, Zongmin; Zhan, Qin; Zhou, Hongbo

2015-01-01

For a security system, the risk assessment is an important method to verdict whether its protection effectiveness is good or not. In this paper, a security system is regarded abstractly as a network by the name of a security network. A security network is made up of security nodes that are abstract functional units with the ability of detecting, delaying and responding. By the use of risk entropy and the Neyman–Pearson criterion, we construct a model to computer the protection probability of any position in the area where a security network is deployed. We provide a solution to find the most vulnerable path of a security network and the protection probability on the path is considered as the risk measure. Finally, we study the effect of some parameters on the risk and the breach protection probability of a security network. Ultimately, we can gain insight about the risk assessment of a security system. - Highlights: • A security system is regarded abstractly as a network made up of security nodes. • We construct a model to computer the protection probability provided by a security network. • We provide a better solution to find the most vulnerable path of a security network. • We build a risk assessment model for a security network based on the most vulnerable path

Hanford waste vitrification systems risk assessment

International Nuclear Information System (INIS)

Miller, W.C.; Hamilton, D.W.; Holton, L.K.; Bailey, J.W.

1991-09-01

A systematic Risk Assessment was performed to identify the technical, regulatory, and programmatic uncertainties and to quantify the risks to the Hanford Site double-shell tank waste vitrification program baseline (as defined in December 1990). Mitigating strategies to reduce the overall program risk were proposed. All major program elements were evaluated, including double-shell tank waste characterization, Tank Farms, retrieval, pretreatment, vitrification, and grouting. Computer-based techniques were used to quantify risks to proceeding with construction of the Hanford Waste Vitrification Plant on the present baseline schedule. Risks to the potential vitrification of single-shell tank wastes and cesium and strontium capsules were also assessed. 62 refs., 38 figs., 26 tabs

In situ remediation-released zero-valent iron nanoparticles impair soil ecosystems health: A C. elegans biomarker-based risk assessment

Energy Technology Data Exchange (ETDEWEB)

Yang, Ying-Fei; Cheng, Yi-Hsien; Liao, Chung-Min, E-mail: cmliao@ntu.edu.tw

2016-11-05

Highlights: • Fe{sup 0} NPs induced infertility risk in C. elegans. • A C.elegans-based probabilistic risk assessment model is developed. • In situ remediation-released Fe{sup 0} NPs impair soil ecosystems health. - Abstract: There is considerable concern over the potential ecotoxicity to soil ecosystems posed by zero-valent iron nanoparticles (Fe{sup 0} NPs) released from in situ environmental remediation. However, a lack of quantitative risk assessment has hampered the development of appropriate testing methods used in environmental applications. Here we present a novel, empirical approach to assess Fe{sup 0} NPs-associated soil ecosystems health risk using the nematode Caenorhabditis elegans as a model organism. A Hill-based dose-response model describing the concentration–fertility inhibition relationships was constructed. A Weibull model was used to estimate thresholds as a guideline to protect C. elegans from infertility when exposed to waterborne or foodborne Fe{sup 0} NPs. Finally, the risk metrics, exceedance risk (ER) and risk quotient (RQ) of Fe{sup 0} NPs in various depths and distances from remediation sites can then be predicted. We showed that under 50% risk probability (ER = 0.5), upper soil layer had the highest infertility risk (95% confidence interval: 13.18–57.40%). The margins of safety and acceptable criteria for soil ecosystems health for using Fe{sup 0} NPs in field scale applications were also recommended. Results showed that RQs are larger than 1 in all soil layers when setting a stricter threshold of ∼1.02 mg L{sup −1} of Fe{sup 0} NPs. This C. elegans biomarker-based risk model affords new insights into the links between widespread use of Fe{sup 0} NPs and environmental risk assessment and offers potential environmental implications of metal-based NPs for in situ remediation.

Biological Select Agents and Toxins: Risk-Based Assessment Management and Oversight.

Energy Technology Data Exchange (ETDEWEB)

Burnett, LouAnn Crawford; Brodsky, Benjamin H.

2016-12-01

Sandia National Laboratories' International Biological and Chemical Threat Reduction (SNL/IBCTR) conducted, on behalf of the Federal Select Agent Program (FSAP), a review of risk assessment in modern select agent laboratories. This review and analysis consisted of literature review, interviews of FSAP staff, entities regulated by FSAP, and deliberations of an expert panel. Additionally, SNL/IBCTR reviewed oversight mechanisms used by industries, US agencies, and other countries for high-consequence risks (e.g, nuclear, chemical, or biological materials, aviation, off-shore drilling, etc.) to determine if alternate oversight mechanisms existed that might be applicable to FSAP oversight of biological select agents and toxins. This report contains five findings, based on these reviews and analyses, with recommendations and suggested actions for FSAP to consider.

Microbiological risk assessment for personal care products.

Science.gov (United States)

Stewart, S E; Parker, M D; Amézquita, A; Pitt, T L

2016-12-01

Regulatory decisions regarding microbiological safety of cosmetics and personal care products are primarily hazard-based, where the presence of a potential pathogen determines decision-making. This contrasts with the Food industry where it is a commonplace to use a risk-based approach for ensuring microbiological safety. A risk-based approach allows consideration of the degree of exposure to assess unacceptable health risks. As there can be a number of advantages in using a risk-based approach to safety, this study explores the Codex Alimentarius (Codex) four-step Microbiological Risk Assessment (MRA) framework frequently used in the Food industry and examines how it can be applied to the safety assessment of personal care products. The hazard identification and hazard characterization steps (one and two) of the Codex MRA framework consider the main microorganisms of concern. These are addressed by reviewing the current industry guidelines for objectionable organisms and analysing reports of contaminated products notified by government agencies over a recent 5-year period, together with examples of reported outbreaks. Data related to estimation of exposure (step three) are discussed, and examples of possible calculations and references are included. The fourth step, performed by the risk assessor (risk characterization), is specific to each assessment and brings together the information from the first three steps to assess the risk. Although there are very few documented uses of the MRA approach for personal care products, this study illustrates that it is a practicable and sound approach for producing products that are safe by design. It can be helpful in the context of designing products and processes going to market and with setting of microbiological specifications. Additionally, it can be applied reactively to facilitate decision-making when contaminated products are released on to the marketplace. Currently, the knowledge available may only allow a

[Development of HIV infection risk assessment tool for men who have sex with men based on Delphi method].

Science.gov (United States)

Li, L L; Jiang, Z; Song, W L; Ding, Y Y; Xu, J; He, N

2017-10-10

Objective: To develop a HIV infection risk assessment tool for men who have sex with men (MSM) based on Delphi method. Methods: After an exhaustive literature review, we used Delphi method to determine the specific items and relative risk scores of the assessment tool through two rounds of specialist consultation and overall consideration of the opinions and suggestions of 17 specialists. Results: The positivity coefficient through first and second round specialist consultation was 100.0 % and 94.1 % , respectively. The mean of authority coefficients ( Cr ) was 0.86. Kendall's W coefficient of the specialist consultation was 0.55 for the first round consultation (χ(2)=84.426, P risk assessment tool for MSM has 8 items. Conclusions: The HIV infection risk assessment tool for MSM, developed under the Delphi method, can be used in the evaluation of HIV infection risk in MSM and individualized prevention and intervention. However, the reliability and validity of this risk assessment tool need to be further evaluated.

Aggregate Exposure and Cumulative Risk Assessment--Integrating Occupational and Non-occupational Risk Factors.

Science.gov (United States)

Lentz, T J; Dotson, G S; Williams, P R D; Maier, A; Gadagbui, B; Pandalai, S P; Lamba, A; Hearl, F; Mumtaz, M

2015-01-01

Occupational exposure limits have traditionally focused on preventing morbidity and mortality arising from inhalation exposures to individual chemical stressors in the workplace. While central to occupational risk assessment, occupational exposure limits have limited application as a refined disease prevention tool because they do not account for all of the complexities of the work and non-occupational environments and are based on varying health endpoints. To be of greater utility, occupational exposure limits and other risk management tools could integrate broader consideration of risks from multiple exposure pathways and routes (aggregate risk) as well as the combined risk from exposure to both chemical and non-chemical stressors, within and beyond the workplace, including the possibility that such exposures may cause interactions or modify the toxic effects observed (cumulative risk). Although still at a rudimentary stage in many cases, a variety of methods and tools have been developed or are being used in allied risk assessment fields to incorporate such considerations in the risk assessment process. These approaches, which are collectively referred to as cumulative risk assessment, have potential to be adapted or modified for occupational scenarios and provide a tangible path forward for occupational risk assessment. Accounting for complex exposures in the workplace and the broader risks faced by the individual also requires a more complete consideration of the composite effects of occupational and non-occupational risk factors to fully assess and manage worker health problems. Barriers to integrating these different factors remain, but new and ongoing community-based and worker health-related initiatives may provide mechanisms for identifying and integrating risk from aggregate exposures and cumulative risks from all relevant sources, be they occupational or non-occupational.

RELEVANCE OF PROCESS RISK ASSESSMENT IN AIRLINES

Directory of Open Access Journals (Sweden)

Oksana G. Feoktistova

2017-01-01

Full Text Available The notion of “the concept on assumed risk” that took over from the outdated concept of absolute security is analyzed, the increasing significance of operating risk assessment at the present stage is noted. Some basic risk assessment techniques are considered. Matrix technique of risk assessment is considered more thoroughly, and it may be used in risk assessment of airlines in the context of labour protection management system.The ability to correctly assess risks and develop appropriate precautionary measures will allow airlines to avoid incidents leading to drastic consequences for staff, as well as to direct and indirect costs for the enterprise among which there could be singled out both direct property damage and loss of profit and expenses connected to incident investigation, penalty and compensation payment, loss of business reputation and so on. To reduce the rate of accidents and to develop safe activities skills for airlines staff a risk assessment chart is supposed to be implemented, which will be an efficient accidents prevention involving the staff in the process and making them follow safe working conditions.Process risk assessment is an integral part of assessment of the whole enterprise activity and work efficiency of a department and particular workers evaluation system. Labour protection activity should be based on risk identification and its control. Risk assessment is a keystone of labour protection activity planning.

Assessment of health risks of policies

International Nuclear Information System (INIS)

Ádám, Balázs; Molnár, Ágnes; Ádány, Róza; Bianchi, Fabrizio; Bitenc, Katarina; Chereches, Razvan; Cori, Liliana; Fehr, Rainer; Kobza, Joanna; Kollarova, Jana

2014-01-01

The assessment of health risks of policies is an inevitable, although challenging prerequisite for the inclusion of health considerations in political decision making. The aim of our project was to develop a so far missing methodological guide for the assessment of the complex impact structure of policies. The guide was developed in a consensual way based on experiences gathered during the assessment of specific national policies selected by the partners of an EU project. Methodological considerations were discussed and summarized in workshops and pilot tested on the EU Health Strategy for finalization. The combined tool, which includes a textual guidance and a checklist, follows the top-down approach, that is, it guides the analysis of causal chains from the policy through related health determinants and risk factors to health outcomes. The tool discusses the most important practical issues of assessment by impact level. It emphasises the transparent identification and prioritisation of factors, the consideration of the feasibility of exposure and outcome assessment with special focus on quantification. The developed guide provides useful methodological instructions for the comprehensive assessment of health risks of policies that can be effectively used in the health impact assessment of policy proposals. - Highlights: • Methodological guide for the assessment of health risks of policies is introduced. • The tool is developed based on the experiences from several case studies. • The combined tool consists of a textual guidance and a checklist. • The top-down approach is followed through the levels of the full impact chain. • The guide provides assistance for the health impact assessment of policy proposals

Assessment of health risks of policies

Energy Technology Data Exchange (ETDEWEB)

Ádám, Balázs, E-mail: badam@cmss.sdu.dk [Unit for Health Promotion Research, Faculty of Health Sciences, University of Southern Denmark, Niels Bohrs Vej 9, DK-6700 Esbjerg (Denmark); Department of Preventive Medicine, Faculty of Public Health, University of Debrecen, P.O. Box 9, H-4012 Debrecen (Hungary); Molnár, Ágnes, E-mail: MolnarAg@smh.ca [Department of Preventive Medicine, Faculty of Public Health, University of Debrecen, P.O. Box 9, H-4012 Debrecen (Hungary); Centre for Research on Inner City Health, Keenan Research Centre, Li Ka Shing Knowledge Institute, St Michael' s Hospital, Victoria 209, Rm. 3-26.22, M5B 1C6 Toronto, Ontario (Canada); Ádány, Róza, E-mail: adany.roza@sph.unideb.hu [Department of Preventive Medicine, Faculty of Public Health, University of Debrecen, P.O. Box 9, H-4012 Debrecen (Hungary); Bianchi, Fabrizio, E-mail: Fabriepi@ifc.cnr.it [Unit of Environmental Epidemiology, Institute of Clinical Physiology, National Council of Research, Moruzzi 1, 56124 Pisa (Italy); Bitenc, Katarina, E-mail: katarina.bitenc@ivz-rs.si [National Institute of Public Health, Trubarjeva 2, SI-1000 Ljubljana (Slovenia); Chereches, Razvan, E-mail: razvan.m.chereches@gmail.com [Faculty of Political, Administrative and Communication Sciences, Babes-Bolyai University, Strada Mihail Kogalniceanu 1, 3400 Cluj (Romania); Cori, Liliana, E-mail: liliana.cori@ifc.cnr.it [Unit of Environmental Epidemiology, Institute of Clinical Physiology, National Council of Research, Moruzzi 1, 56124 Pisa (Italy); Fehr, Rainer, E-mail: rainer.fehr@uni-bielefeld.de [NRW Centre for Health, Westerfeldstr. 35-37, 33611 Bielefeld (Germany); Kobza, Joanna, E-mail: koga1@poczta.onet.pl [Public Health Department, Silesian Medical University, 18 Medykow Street, 40-752 Katowice (Poland); Kollarova, Jana, E-mail: janakollarova@yahoo.com [Department of Health Promotion, Regional Public Health Authority, Ipelska 1, 04011 Kosice (Slovakia); and others

2014-09-15

The assessment of health risks of policies is an inevitable, although challenging prerequisite for the inclusion of health considerations in political decision making. The aim of our project was to develop a so far missing methodological guide for the assessment of the complex impact structure of policies. The guide was developed in a consensual way based on experiences gathered during the assessment of specific national policies selected by the partners of an EU project. Methodological considerations were discussed and summarized in workshops and pilot tested on the EU Health Strategy for finalization. The combined tool, which includes a textual guidance and a checklist, follows the top-down approach, that is, it guides the analysis of causal chains from the policy through related health determinants and risk factors to health outcomes. The tool discusses the most important practical issues of assessment by impact level. It emphasises the transparent identification and prioritisation of factors, the consideration of the feasibility of exposure and outcome assessment with special focus on quantification. The developed guide provides useful methodological instructions for the comprehensive assessment of health risks of policies that can be effectively used in the health impact assessment of policy proposals. - Highlights: • Methodological guide for the assessment of health risks of policies is introduced. • The tool is developed based on the experiences from several case studies. • The combined tool consists of a textual guidance and a checklist. • The top-down approach is followed through the levels of the full impact chain. • The guide provides assistance for the health impact assessment of policy proposals.

Risk assessment and multi-criteria decision-making

International Nuclear Information System (INIS)

Segerstaahl, Boris

1989-01-01

Risk assessment and analysis is connected to the policy framework used in decision-making on issues concerning technological risk. A review of the problems created by different views concerning the fundamental structure of risk concepts is used as a way to describe the structure of risk assessment studies as used in decision-making. The fundamental difference between judgments based on assessments and on perceptions is analyzed in order to explain the dynamics of the decision making process. A proposed effort to study the energy sector as a dynamic endless game implementing a mixed strategy is suggested. (author)

Hepatitis Risk Assessment

Science.gov (United States)

... please visit this page: About CDC.gov . Hepatitis Risk Assessment Recommend on Facebook Tweet Share Compartir Viral Hepatitis. Are you at risk? Take this 5 minute Hepatitis Risk Assessment developed ...

Military Ecological Risk Assessment Framework (MERAF) for Assessment of Risks of Military Training and Testing to Natural Resources

Energy Technology Data Exchange (ETDEWEB)

Suter II, G.W.

2003-06-18

The objective of this research is to provide the DoD with a framework based on a systematic, risk-based approach to assess impacts for management of natural resources in an ecosystem context. This risk assessment framework is consistent with, but extends beyond, the EPA's ecological risk assessment framework, and specifically addresses DoD activities and management needs. MERAF is intended to be consistent with existing procedures for environmental assessment and planning with DoD testing and training. The intention is to supplement these procedures rather than creating new procedural requirements. MERAF is suitable for use for training and testing area assessment and management. It does not include human health risks nor does it address specific permitting or compliance requirements, although it may be useful in some of these cases. Use of MERAF fits into the National Environmental Policy Act (NEPA) process by providing a consistent and rigorous way of organizing and conducting the technical analysis for Environmental Impact Statements (EISs) (Sigal 1993; Carpenter 1995; Canter and Sadler 1997). It neither conflicts with, nor replaces, procedural requirements within the NEPA process or document management processes already in place within DoD.

The use of comparative risk assessment in decision making

International Nuclear Information System (INIS)

Chicken, J.C.; Hayns, M.R.; Tolley, B.

1989-01-01

This paper justifies: 1) Comparative risk assessment provides a way of establishing whether or not the risks associated with a novel proposal are likely to satisfy current norms. 2) Comparative risk assessment is an aid to decision making when for some reason there is inadequate quantitative data about the risks associated with a project. 3) One problem is that there is no single universally acceptable norm. Norms vary both with time and from activity to activity. The spread of acceptable norms spans at least two orders of magnitude. 4) For any comparative risk assessment to be considered more than a suggestion on how acceptable a risk is, the risks that are compared must be similar and located in similar cultural and geographical environments. 5) Ulitmately justification of the acceptability of a project must be based on data generated directly by the project itself and any opinion based on comparative evidence must be iteratively revised as direct hard evidence becomes available. 6) Comparative risk assessment has a useful role in presentations to the lay public about the acceptability of a particular risk. 7) There may be more problems in making a comparative assessment of risk acceptability in socio-political terms than in technical or economic terms. The central requirement that the comparison must be based on data from similar cultural backgrounds is often hard to satisfy in relation to socio-political considerations

Risk Probability Estimating Based on Clustering

DEFF Research Database (Denmark)

Chen, Yong; Jensen, Christian D.; Gray, Elizabeth

2003-01-01

of prior experiences, recommendations from a trusted entity or the reputation of the other entity. In this paper we propose a dynamic mechanism for estimating the risk probability of a certain interaction in a given environment using hybrid neural networks. We argue that traditional risk assessment models...... from the insurance industry do not directly apply to ubiquitous computing environments. Instead, we propose a dynamic mechanism for risk assessment, which is based on pattern matching, classification and prediction procedures. This mechanism uses an estimator of risk probability, which is based...

BBN-Based Portfolio Risk Assessment for NASA Technology R&D Outcome

Science.gov (United States)

Geuther, Steven C.; Shih, Ann T.

2016-01-01

The NASA Aeronautics Research Mission Directorate (ARMD) vision falls into six strategic thrusts that are aimed to support the challenges of the Next Generation Air Transportation System (NextGen). In order to achieve the goals of the ARMD vision, the Airspace Operations and Safety Program (AOSP) is committed to developing and delivering new technologies. To meet the dual challenges of constrained resources and timely technology delivery, program portfolio risk assessment is critical for communication and decision-making. This paper describes how Bayesian Belief Network (BBN) is applied to assess the probability of a technology meeting the expected outcome. The network takes into account the different risk factors of technology development and implementation phases. The use of BBNs allows for all technologies of projects in a program portfolio to be separately examined and compared. In addition, the technology interaction effects are modeled through the application of object-oriented BBNs. The paper discusses the development of simplified project risk BBNs and presents various risk results. The results presented include the probability of project risks not meeting success criteria, the risk drivers under uncertainty via sensitivity analysis, and what-if analysis. Finally, the paper shows how program portfolio risk can be assessed using risk results from BBNs of projects in the portfolio.

Selective critique of risk assessments with recommendations for improving methodology and practise

International Nuclear Information System (INIS)

Aven, Terje

2011-01-01

Risk assessments are often criticised for defending activities that could harm the environment and human health. The risk assessments produce numbers which are used to prove that the risk associated with the activity is acceptable. In this way, risk assessments seem to be a tool generally serving business. Government agencies have based their regulations on the use of risk assessment and the prevailing practise is supported by the regulations. In this paper, we look more closely into this critique. Are risk assessments being misused or are risk assessments simply not a suitable tool for guiding decision-making in the face of risks and uncertainties? Is the use of risk assessments not servicing public interests? We argue that risk assessments may provide useful decision support but the quality of the risk assessments and the associated risk assessment processes need to be improved. In this paper, three main improvement areas (success factors) are identified and discussed: (1) the scientific basis of the risk assessments needs to be strengthened, (2) the risk assessments need to provide a much broader risk picture than what is typically the case today. Separate uncertainty analyses should be carried out, extending the traditional probabilistic-based analyses and (3) the cautionary and precautionary principles need to be seen as rational risk management approaches, and their application would, to a large extent, be based on risk and uncertainty assessments.

Risk monitor - a tool for operational safety assessment risk monitor - user's manual

International Nuclear Information System (INIS)

Hari Prasad, M.; Vinod, Gopika; Saraf, R.K.; Ghosh, A.K.

2006-06-01

Probabilistic Safety Assessment has become a key tool as on today to identify and understand Nuclear Power Plant vulnerabilities. As a result of the availability of these PSA studies, there is a desire to use them to enhance plant safety and to operate the nuclear stations in the most efficient manner. Risk Monitor is a PC based tool, which computes the real time safety level and assists plant personnel to manage day-to-day activities. Risk Monitor is a PC based user friendly software tool used for modification and re-analysis of a nuclear Power plant. Operation of Risk Monitor is based on PSA methods for assisting in day to day applications. Risk Monitoring programs can assess the risk profile and are used to optimize the operation of Nuclear Power Plants with respect to a minimum risk level over the operating time. This report presents the background activities of Risk Monitor, its application areas and the step by step procedure for the user.to interact with the software. This software can be used with the PSA model of any Nuclear Power Plant. (author)

RiskREP: Risk-Based Security Requirements Elicitation and Prioritization

OpenAIRE

Herrmann, Andrea; Morali, A.; Etalle, Sandro; Wieringa, Roelf J.; Niedrite, Laila; Strazdina, Renate; Wangler, Benkt

2011-01-01

Companies are under pressure to be in control of their assets but at the same time they must operate as efficiently as possible. This means that they aim to implement “good-enough security‿ but need to be able to justify their security investment plans. In this paper, we present a Risk-Based Requirements Prioritization method (RiskREP) that extends misuse case-based methods with IT architecture based risk assessment and countermeasure definition and prioritization. Countermeasure prioritizati...

Biomonitoring-based risk assessment for hexabromocyclododecane (HBCD).

Science.gov (United States)

Aylward, Lesa L; Hays, Sean M

2011-06-01

Hexabromocyclododecane (HBCD) is a brominated flame retardant compound that has been the subject of recent interest and risk assessment efforts due to its detection in a variety of environmental media and in human biological matrices. Because the exposure pathways for HBCD may be varied and exposure estimation uncertain, biomonitoring for HBCD in humans shows promise as a means of reflecting integrated human exposures to HBCD with lower uncertainty than through estimation of external exposures via multiple pathways. Data from numerous biomonitoring studies of HBCD over the past decade indicate that the central tendency of lipid-adjusted serum and human milk concentrations is approximately 1ng/g lipid, with upper bound levels of approximately 20 ng/g lipid. Recent risk assessment evaluations from Health Canada and the European Union have identified points of departure of 10 and 20mg/kg day, respectively, from rat repeated dose studies. The corresponding measured or estimated lipid-adjusted tissue concentrations in the laboratory animals at these points of departure range from 120,000 to 190,000 ng/g lipid. In comparison to these concentrations, the biomonitored human serum and milk concentrations indicate margins of exposure (MOEs) of 6000 to more than 100,000, which are greatly in excess of target MOE values. The use of internal dose measures (both from measurements of tissue concentrations in animal toxicology studies and from human biomonitoring studies) provides risk managers with highly relevant exposure information that is less uncertain than estimated external doses. Copyright © 2011 Elsevier GmbH. All rights reserved.

Mental Health Professionals' Suicide Risk Assessment and Management Practices.

Science.gov (United States)

Roush, Jared F; Brown, Sarah L; Jahn, Danielle R; Mitchell, Sean M; Taylor, Nathanael J; Quinnett, Paul; Ries, Richard

2018-01-01

Approximately 20% of suicide decedents have had contact with a mental health professional within 1 month prior to their death, and the majority of mental health professionals have treated suicidal individuals. Despite limited evidence-based training, mental health professionals make important clinical decisions related to suicide risk assessment and management. The current study aimed to determine the frequency of suicide risk assessment and management practices and the association between fear of suicide-related outcomes or comfort working with suicidal individuals and adequacy of suicide risk management decisions among mental health professionals. Mental health professionals completed self-report assessments of fear, comfort, and suicide risk assessment and management practices. Approximately one third of mental health professionals did not ask every patient about current or previous suicidal thoughts or behaviors. Further, comfort, but not fear, was positively associated with greater odds of conducting evidence-based suicide risk assessments at first appointments and adequacy of suicide risk management practices with patients reporting suicide ideation and a recent suicide attempt. The study utilized a cross-sectional design and self-report questionnaires. Although the majority of mental health professionals report using evidenced-based practices, there appears to be variability in utilization of evidence-based practices.

A Robust Approach to Risk Assessment Based on Species Sensitivity Distributions.

Science.gov (United States)

Monti, Gianna S; Filzmoser, Peter; Deutsch, Roland C

2018-05-03

The guidelines for setting environmental quality standards are increasingly based on probabilistic risk assessment due to a growing general awareness of the need for probabilistic procedures. One of the commonly used tools in probabilistic risk assessment is the species sensitivity distribution (SSD), which represents the proportion of species affected belonging to a biological assemblage as a function of exposure to a specific toxicant. Our focus is on the inverse use of the SSD curve with the aim of estimating the concentration, HCp, of a toxic compound that is hazardous to p% of the biological community under study. Toward this end, we propose the use of robust statistical methods in order to take into account the presence of outliers or apparent skew in the data, which may occur without any ecological basis. A robust approach exploits the full neighborhood of a parametric model, enabling the analyst to account for the typical real-world deviations from ideal models. We examine two classic HCp estimation approaches and consider robust versions of these estimators. In addition, we also use data transformations in conjunction with robust estimation methods in case of heteroscedasticity. Different scenarios using real data sets as well as simulated data are presented in order to illustrate and compare the proposed approaches. These scenarios illustrate that the use of robust estimation methods enhances HCp estimation. © 2018 Society for Risk Analysis.

PRECIS -- A probabilistic risk assessment system

International Nuclear Information System (INIS)

Peterson, D.M.; Knowlton, R.G. Jr.

1996-01-01

A series of computer tools has been developed to conduct the exposure assessment and risk characterization phases of human health risk assessments within a probabilistic framework. The tools are collectively referred to as the Probabilistic Risk Evaluation and Characterization Investigation System (PRECIS). With this system, a risk assessor can calculate the doses and risks associated with multiple environmental and exposure pathways, for both chemicals and radioactive contaminants. Exposure assessment models in the system account for transport of contaminants to receptor points from a source zone originating in unsaturated soils above the water table. In addition to performing calculations of dose and risk based on initial concentrations, PRECIS can also be used in an inverse manner to compute soil concentrations in the source area that must not be exceeded if prescribed limits on dose or risk are to be met. Such soil contaminant levels, referred to as soil guidelines, are computed for both single contaminants and chemical mixtures and can be used as action levels or cleanup levels. Probabilistic estimates of risk, dose and soil guidelines are derived using Monte Carlo techniques

Model of personalised risk assessment of phytoestrogen intake based on 11 SNP in ESR1 and ESR2 genes

Directory of Open Access Journals (Sweden)

Radoslav Zidek

2016-12-01

Full Text Available Phytoestrogens can induce biological responses in vertebrates by mimicking or modulating the action or production of endogenous hormones, and because of their structural similarity with estradiol they have the ability to cause estrogenic or anti-estrogenic effects. Risk assessment of phytoestrogens intake may therefore provide important information useful in the adjustment of nutrients composition, as one of nutrigenomics approaches. Proper risk assessment is an essential part of good nutrient composition. The current risk assessment procedures does use an additive effect of genes, but the accumulation of relevant factors do not count with the distribution of risk in the European population. A combination of approaches based on genetic score, along with the use of the data bases like 1000 genomes and dbSNP is a powerful tool for population risk modelling that would provide reasonable results without needs of as testing a representative number of individual genetic profiles.

Risk-based probabilistic approach to assess the impact of false mussel invasions on farmed hard clams.

Science.gov (United States)

Liao, Chung-Min; Ju, Yun-Ru; Chio, Chia-Pin; Chen, Wei-Yu

2010-02-01

The purpose of this article is to provide a risk-based predictive model to assess the impact of false mussel Mytilopsis sallei invasions on hard clam Meretrix lusoria farms in the southwestern region of Taiwan. The actual spread of invasive false mussel was predicted by using analytical models based on advection-diffusion and gravity models. The proportion of hard clam colonized and infestation by false mussel were used to characterize risk estimates. A mortality model was parameterized to assess hard clam mortality risk characterized by false mussel density and infestation intensity. The published data were reanalyzed to parameterize a predictive threshold model described by a cumulative Weibull distribution function that can be used to estimate the exceeding thresholds of proportion of hard clam colonized and infestation. Results indicated that the infestation thresholds were 2-17 ind clam(-1) for adult hard clams, whereas 4 ind clam(-1) for nursery hard clams. The average colonization thresholds were estimated to be 81-89% for cultivated and nursery hard clam farms, respectively. Our results indicated that false mussel density and infestation, which caused 50% hard clam mortality, were estimated to be 2,812 ind m(-2) and 31 ind clam(-1), respectively. This study further indicated that hard clam farms that are close to the coastal area have at least 50% probability for 43% mortality caused by infestation. This study highlighted that a probabilistic risk-based framework characterized by probability distributions and risk curves is an effective representation of scientific assessments for farmed hard clam in response to the nonnative false mussel invasion.

Environmental Comparative Risk Assessment: A Case Study

International Nuclear Information System (INIS)

Ali, M.M.

2007-01-01

Health and environmental impacts associated with energy production and industrial activities as well as food production and agricultural activities have had great concern in the last decades. Early activities emerged in late 80s of the last century through an Inter- Agency project (lAEA, UNDY, WHO, ... ) on the comparative risk assessment from energy systems and industrial complexes. A work-shop on Risk Assessment and Management in large industrial areas was held in Alexandria Egypt on 20-33 Det 1993, sponsored by IAEA. Several conferences, experts work groups and workshops were held there of Recent trends in determining risks are: 1. Use of probabilistic risk assessment approach to identify hazardous activities and accident scenario. 2. development of data base on failure probabilities and appropriate physical models. 3. Development of related directives and regulations and criteria Comparative risk assessment case study as a tool for comparing risk is emphasized Criteria of exposure to human and ecological risks are addressed

Recent developments in carcinogenic risk assessment

International Nuclear Information System (INIS)

Krewski, D.; Murdoch, D.; Withey, J.R.

1989-01-01

In this paper, recent developments in the quantitative assessment of carcinogenic risks based on toxicological and epidemiological data are reviewed. In particular, model-free approaches to low-dose risk assessment which involve only the assumption of low-dose linearity are considered. Measures of carcinogenic potency which avoid the need to extrapolate to low doses are also described. The allometric bases for converting risk estimates between species are then discussed. Pharmacokinetic models for determining the dose delivered to the target tissue are examined, and the implications of using such models in extrapolating between doses, of exposure, and species are examined. The application of these concepts in chemical and radiation carcinogenesis is illustrated by means of brief case studies of methylene chloride and Rn. Biologically motivated cancer models based on the initiation-promotion-progression theory of carcinogenesis are discussed and compared with the classical multistage model. The estimation of risks with time-dependent exposure patterns is considered, and conditions under which the use of a time-weighted average dose is appropriate are identified. Finally, the estimation of carcinogenic risks posed by exposure to complex mixtures is explored. 92 references

Toward a risk-based approach to the assessment of the surety of information systems

Energy Technology Data Exchange (ETDEWEB)

Wyss, G.D.; Fletcher, S.K.; Halbgewachs, R.D.; Jansma, R.M.; Lim, J.J.; Murphy, M.; Sands, P.D.

1995-03-01

Traditional approaches to the assessment of information systems have treated system security, system reliability, data integrity, and application functionality as separate disciplines. However, each areas requirements and solutions have a profound impact on the successful implementation of the other areas. A better approach is to assess the ``surety`` of an information system, which is defined as ensuring the ``correct`` operation of an information system by incorporating appropriate levels of safety, functionality, confidentiality, availability, and integrity. Information surety examines the combined impact of design alternatives on all of these areas. We propose a modelling approach that combines aspects of fault trees and influence diagrams for assessing information surety requirements under a risk assessment framework. This approach allows tradeoffs to be based on quantitative importance measures such as risk reduction while maintaining the modelling flexibility of the influence diagram paradigm. This paper presents an overview of the modelling method and a sample application problem.

Level of Alkenylbenzenes in Parsley and Dill Based Teas and Associated Risk Assessment Using the Margin of Exposure Approach

NARCIS (Netherlands)

Alajlouni, Abdul; Al-Malahmeh, Amer J.; Isnaeni, Farida Nur; Wesseling, Sebas; Vervoort, Jacques; Rietjens, Ivonne M.C.M.

2016-01-01

Risk assessment of parsley and dill based teas that contain alkenylbenzenes was performed. To this end the estimated daily intake (EDI) of alkenylbenzenes resulting from use of the teas was quantified. Since most teas appeared to contain more than one alkenylbenzene, a combined risk assessment

A risk communication case study: the Nevada risk assessment/management program

International Nuclear Information System (INIS)

Hechanova, A.E.

2000-01-01

The Nevada Risk Assessment/Management Program (NRAMP) is part of a national effort by the U.S. Department of Energy (DOE) to develop new sources of information and approaches to risk assessment, risk management, risk communication and public outreach as these objectives relate to the ecological and human health effects of radioactive and hazardous material management and site remediation activities. This paper reviews the innovation behind the NRAMP project and presents a synopsis of the NRAMP effort which occurred from 1995 to 2000. The primary goals of the DOE in awarding the cooperative agreement establishing NRAMP were to (I) use a risk-based approach to evaluate the consequences of alternative actions in DOE's Environmental Remediation Programs at sites in Nevada and (2) use a neutral and credible institution outside the DOE to perform the risk assessments and contribute to public education about environmental management issues at the Nevada Test Site. (author)

Risk-based and deterministic regulation

International Nuclear Information System (INIS)

Fischer, L.E.; Brown, N.W.

1995-07-01

Both risk-based and deterministic methods are used for regulating the nuclear industry to protect the public safety and health from undue risk. The deterministic method is one where performance standards are specified for each kind of nuclear system or facility. The deterministic performance standards address normal operations and design basis events which include transient and accident conditions. The risk-based method uses probabilistic risk assessment methods to supplement the deterministic one by (1) addressing all possible events (including those beyond the design basis events), (2) using a systematic, logical process for identifying and evaluating accidents, and (3) considering alternative means to reduce accident frequency and/or consequences. Although both deterministic and risk-based methods have been successfully applied, there is need for a better understanding of their applications and supportive roles. This paper describes the relationship between the two methods and how they are used to develop and assess regulations in the nuclear industry. Preliminary guidance is suggested for determining the need for using risk based methods to supplement deterministic ones. However, it is recommended that more detailed guidance and criteria be developed for this purpose

[Health Risk Assessment of Drinking Water Quality in Tianjin Based on GIS].

Science.gov (United States)

Fu, Gang; Zeng, Qiang; Zhao, Liang; Zhang, Yue; Feng, Bao-jia; Wang, Rui; Zhang, Lei; Wang, Yang; Hou, Chang-chun

2015-12-01

This study intends to assess the potential health hazards of drinking water quality and explore the application of geographic information system( GIS) in drinking water safety in Tianjin. Eight hundred and fifty water samples from 401 sampling points in Tianjin were measured according to the national drinking water standards. The risk assessment was conducted using the environmental health risk assessment model recommended by US EAP, and GIS was combined to explore the information visualization and risk factors simultaneously. The results showed that the health risks of carcinogens, non-carcinogens were 3.83 x 10⁻⁵, 5.62 x 10⁻⁹ and 3.83 x 10⁻⁵ for total health risk respectively. The rank of health risk was carcinogen > non-carcinogen. The rank of carcinogens health risk was urban > new area > rural area, chromium (VI) > cadmium > arsenic > trichlormethane > carbon tetrachloride. The rank of non-carcinogens health risk was rural area > new area > urban, fluoride > cyanide > lead > nitrate. The total health risk level of drinking water in Tianjin was lower than that of ICRP recommended level (5.0 x 10⁻⁵), while was between US EPA recommended level (1.0 x 10⁻⁴-1.0 x 10⁻⁶). It was at an acceptable level and would not cause obvious health hazards. The main health risks of drinking water came from carcinogens. More attentions should be paid to chromium (VI) for carcinogens and fluoride for non-carcinogens. GIS can accomplish information visualization of drinking water risk assessment and further explore of risk factors.

Offshore risk assessment

CERN Document Server

Vinnem, Jan-Erik

2014-01-01

  Offshore Risk Assessment was the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. Risk assessment techniques have been used for more than three decades in the offshore oil and gas industry, and their use is set to expand increasingly as the industry moves into new areas and faces new challenges in older regions.   This updated and expanded third edition has been informed by a major R&D program on offshore risk assessment in Norway and summarizes research from 2006 to the present day. Rooted with a thorough discussion of risk metrics and risk analysis methodology,  subsequent chapters are devoted to analytical approaches to escalation, escape, evacuation and rescue analysis of safety and emergency systems.   Separate chapters analyze the main hazards of offshore structures: fire, explosion, collision, and falling objects as well as structural and marine hazards. Risk mitigation and control are discussed, as well as an illustrat...

An In Silico Approach for Evaluating a Fraction-Based, Risk Assessment Method for Total Petroleum Hydrocarbon Mixtures

Directory of Open Access Journals (Sweden)

Nina Ching Y. Wang

2012-01-01

Full Text Available Both the Massachusetts Department of Environmental Protection (MADEP and the Total Petroleum Hydrocarbon Criteria Working Group (TPHCWG developed fraction-based approaches for assessing human health risks posed by total petroleum hydrocarbon (TPH mixtures in the environment. Both organizations defined TPH fractions based on their expected environmental fate and by analytical chemical methods. They derived toxicity values for selected compounds within each fraction and used these as surrogates to assess hazard or risk of exposure to the whole fractions. Membership in a TPH fraction is generally defined by the number of carbon atoms in a compound and by a compound's equivalent carbon (EC number index, which can predict its environmental fate. Here, we systematically and objectively re-evaluate the assignment of TPH to specific fractions using comparative molecular field analysis and hierarchical clustering. The approach is transparent and reproducible, reducing inherent reliance on judgment when toxicity information is limited. Our evaluation of membership in these fractions is highly consistent (̃80% on average across various fractions with the empirical approach of MADEP and TPHCWG. Furthermore, the results support the general methodology of mixture risk assessment to assess both cancer and noncancer risk values after the application of fractionation.

Hazard waste risk assessment

International Nuclear Information System (INIS)

Hawley, K.A.; Napier, B.A.

1986-01-01

Pacific Northwest Laboratory continued to provide technical assistance to the Department of Energy (DOE) Office of Operational Safety (OOS) in the area of risk assessment for hazardous and radioactive-mixed waste management. The overall objective is to provide technical assistance to OOS in developing cost-effective risk assessment tools and strategies for bringing DOE facilities into compliance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA or Superfund) and the Resource Conservation and Recovery Act (RCRA). Major efforts during FY 1985 included (1) completing the modification of the Environmental Protection Agency (EPA) Hazard Ranking System (HRS) and developing training manuals and courses to assist in field office implementation of the modified Hazard Ranking System (mHRS); (2) initiating the development of a system for reviewing field office HRS/mHRS evaluations for appropriate use of data and appropriate application of the methodology; (3) initiating the development of a data base management system to maintain all field office HRS/mHRS scoring sheets and to support the master OOS environmental data base system; (4) developing implementation guidance for Phase I of the DOE CERCLA Program, Installation Assessment; (5) continuing to develop an objective, scientifically based methodology for DOE management to use in establishing priorities for conducting site assessments under Phase II of the DOE CERCLA Program, Confirmation; and (6) participating in developing the DOE response to EPA on the proposed listing of three sites on the National Priorities List

Use of epidemiologic data in Integrated Risk Information System (IRIS) assessments

International Nuclear Information System (INIS)

Persad, Amanda S.; Cooper, Glinda S.

2008-01-01

In human health risk assessment, information from epidemiologic studies is typically utilized in the hazard identification step of the risk assessment paradigm. However, in the assessment of many chemicals by the Integrated Risk Information System (IRIS), epidemiologic data, both observational and experimental, have also been used in the derivation of toxicological risk estimates (i.e., reference doses [RfD], reference concentrations [RfC], oral cancer slope factors [CSF] and inhalation unit risks [IUR]). Of the 545 health assessments posted on the IRIS database as of June 2007, 44 assessments derived non-cancer or cancer risk estimates based on human data. RfD and RfC calculations were based on a spectrum of endpoints from changes in enzyme activity to specific neurological or dermal effects. There are 12 assessments with IURs based on human data, two assessments that extrapolated human inhalation data to derive CSFs and one that used human data to directly derive a CSF. Lung or respiratory cancer is the most common endpoint for cancer assessments based on human data. To date, only one chemical, benzene, has utilized human data for derivation of all three quantitative risk estimates (i.e., RfC, RfD, and dose-response modeling for cancer assessment). Through examples from the IRIS database, this paper will demonstrate how epidemiologic data have been used in IRIS assessments for both adding to the body of evidence in the hazard identification process and in the quantification of risk estimates in the dose-response component of the risk assessment paradigm

Nano-TiO₂--feasibility and challenges for human health risk assessment based on open literature.

Science.gov (United States)

Christensen, Frans M; Johnston, Helinor J; Stone, Vicki; Aitken, Robert J; Hankin, Steve; Peters, Sheona; Aschberger, Karin

2011-06-01

This study aims at investigating feasibility and challenges associated with conducting a human health risk assessment for nano-titanium-dioxide (nano-TiO₂) based on the open literature by following an approach similar to a classical regulatory risk assessment. Gaps in the available data set, both in relation to exposures and hazard, do not allow reaching any definite conclusions that could be used for regulatory decision-making. Results show that repeated inhalation in the workplace and possibly consumer inhalation may cause risks. Also short-term inhalation following spray applications may cause risks. Main future work should focus on generating occupational and consumer inhalation exposure data, as well as toxicity data on absorption following inhalation, repeated dermal contact, and contact with damaged skin. Also relevant seems further information on possible neurotoxicity and genotoxicity/carcinogenicity, as well as establishing a No Observed Adverse Effect Level (NOAEL) for acute inhalation of nano-TiO₂.

NASA Human System Risk Assessment Process

Science.gov (United States)

Francisco, D.; Romero, E.

2016-01-01

NASA utilizes an evidence based system to perform risk assessments for the human system for spaceflight missions. The center of this process is the multi-disciplinary Human System Risk Board (HSRB). The HSRB is chartered from the Chief Health and Medical Officer (OCHMO) at NASA Headquarters. The HSRB reviews all human system risks via an established comprehensive risk and configuration management plan based on a project management approach. The HSRB facilitates the integration of human research (terrestrial and spaceflight), medical operations, occupational surveillance, systems engineering and many other disciplines in a comprehensive review of human system risks. The HSRB considers all factors that influence human risk. These factors include pre-mission considerations such as screening criteria, training, age, sex, and physiological condition. In mission factors such as available countermeasures, mission duration and location and post mission factors such as time to return to baseline (reconditioning), post mission health screening, and available treatments. All of the factors influence the total risk assessment for each human risk. The HSRB performed a comprehensive review of all potential inflight medical conditions and events and over the course of several reviews consolidated the number of human system risks to 30, where the greatest emphasis is placed for investing program dollars for risk mitigation. The HSRB considers all available evidence from human research and, medical operations and occupational surveillance in assessing the risks for appropriate mitigation and future work. All applicable DRMs (low earth orbit for 6 and 12 months, deep space for 30 days and 1 year, a lunar mission for 1 year, and a planetary mission for 3 years) are considered as human system risks are modified by the hazards associated with space flight such as microgravity, exposure to radiation, distance from the earth, isolation and a closed environment. Each risk has a summary

Monumental Masonry Buildings Pre-Assessment Method Based on Risk Assessment

Directory of Open Access Journals (Sweden)

Meltem VATAN

2012-04-01

Full Text Available Depending on the construction period, geometrical typology, construction and organization of the structure, element size and construction material of historic monumental structures; constructed with bricks, stones, adobe and mortar, are diverse and very complicated. Structural safety is guaranteed by the codes, guidelines, and specifications for recently constructed concrete and steel buildings, but there is no specific criterion for evaluating the historic monumental buildings. This study presents a scoring system method for classifying the risk level of the historic monumental structures based on visual information. This method is based on the acquisition of visual data of the building by using the developed building inspection form, storage of the acquired data on the web database and evaluation of the risk score of the inspected building automatically by the computer database system.

Integrating adaptive behaviour in large-scale flood risk assessments: an Agent-Based Modelling approach

Science.gov (United States)

Haer, Toon; Aerts, Jeroen

2015-04-01

Between 1998 and 2009, Europe suffered over 213 major damaging floods, causing 1126 deaths, displacing around half a million people. In this period, floods caused at least 52 billion euro in insured economic losses making floods the most costly natural hazard faced in Europe. In many low-lying areas, the main strategy to cope with floods is to reduce the risk of the hazard through flood defence structures, like dikes and levees. However, it is suggested that part of the responsibility for flood protection needs to shift to households and businesses in areas at risk, and that governments and insurers can effectively stimulate the implementation of individual protective measures. However, adaptive behaviour towards flood risk reduction and the interaction between the government, insurers, and individuals has hardly been studied in large-scale flood risk assessments. In this study, an European Agent-Based Model is developed including agent representatives for the administrative stakeholders of European Member states, insurers and reinsurers markets, and individuals following complex behaviour models. The Agent-Based Modelling approach allows for an in-depth analysis of the interaction between heterogeneous autonomous agents and the resulting (non-)adaptive behaviour. Existing flood damage models are part of the European Agent-Based Model to allow for a dynamic response of both the agents and the environment to changing flood risk and protective efforts. By following an Agent-Based Modelling approach this study is a first contribution to overcome the limitations of traditional large-scale flood risk models in which the influence of individual adaptive behaviour towards flood risk reduction is often lacking.

Shape-based assessment of vertebral fracture risk in postmenopausal women using discriminative shape alignment

DEFF Research Database (Denmark)

Crimi, Alessandro; Loog, Marco; de Bruijne, Marleen

2012-01-01

RATIONALE AND OBJECTIVES: Risk assessment of future osteoporotic vertebral fractures is currently based mainly on risk factors, such as bone mineral density, age, prior fragility fractures, and smoking. It can be argued that an osteoporotic vertebral fracture is not exclusively an abrupt event...... independently performed manual annotations of the vertebrae, and fracture prediction using shape features extracted from the baseline annotations was performed. This was implemented using posterior probabilities from a standard linear classifier. RESULTS: The classifier tested on the study population quantified...

Aquatic risk assessment of the new rice herbicide profoxydim

Energy Technology Data Exchange (ETDEWEB)

Sanchez, Paloma [Laboratory for Ecotoxicology, Department of the Environment, INIA, Crta De La Coruna Km 7, 28040 Madrid (Spain)]. E-mail: arguello@inia.es; Kubitza, Johanna [BASF-AG, Agricultural Center Limburgerhof, P.O. Box 120, D-67114 Limburgerhof (Germany); Peter Dohmen, G. [BASF-AG, Agricultural Center Limburgerhof, P.O. Box 120, D-67114 Limburgerhof (Germany); Tarazona, Jose V. [Laboratory for Ecotoxicology, Department of the Environment, INIA, Crta De La Coruna Km 7, 28040 Madrid (Spain)

2006-07-15

A tiered protocol for assessing ecological risks has been applied to the rice pesticide profoxydim. The initial assessment (Tier I) was based on toxicity exposure ratio (TER) calculations based on laboratory data using a worst-case rice scenario. The first refinement (Tier II) was based on direct toxicity assessment (DTA) of water samples collected during a field-mesocosm study. Finally, a higher-tier assessment on the in situ assessment of paddy community responses (field-mesocosm-Tier III) was performed. A successive application of three pesticides, the herbicides azimsulfuron, propanil and the insecticide malathion, was used as reference controls. The refined assessments indicated a lower risk than that predicted from TER estimations. DTA-based Tier II showed toxicity effects only for concentrations above the recommended dose of profoxydim. Effects for reference controls were observed in DTA which were not expected from Tier I. The field-mesocosm study confirmed these effects but also showed that they were transient and of low relevance. - Risk refinement assessment of rice pesticides starting with DTA and moving to community studies is a cost-effective approach, only if required.

Aquatic risk assessment of the new rice herbicide profoxydim

International Nuclear Information System (INIS)

Sanchez, Paloma; Kubitza, Johanna; Peter Dohmen, G.; Tarazona, Jose V.

2006-01-01

A tiered protocol for assessing ecological risks has been applied to the rice pesticide profoxydim. The initial assessment (Tier I) was based on toxicity exposure ratio (TER) calculations based on laboratory data using a worst-case rice scenario. The first refinement (Tier II) was based on direct toxicity assessment (DTA) of water samples collected during a field-mesocosm study. Finally, a higher-tier assessment on the in situ assessment of paddy community responses (field-mesocosm-Tier III) was performed. A successive application of three pesticides, the herbicides azimsulfuron, propanil and the insecticide malathion, was used as reference controls. The refined assessments indicated a lower risk than that predicted from TER estimations. DTA-based Tier II showed toxicity effects only for concentrations above the recommended dose of profoxydim. Effects for reference controls were observed in DTA which were not expected from Tier I. The field-mesocosm study confirmed these effects but also showed that they were transient and of low relevance. - Risk refinement assessment of rice pesticides starting with DTA and moving to community studies is a cost-effective approach, only if required

Implementation of a risk assessment tool based on a probabilistic safety assessment developed for radiotherapy practices

International Nuclear Information System (INIS)

Paz, A.; Godinez, V.; Lopez, R.

2010-10-01

The present work describes the implementation process and main results of the risk assessment to the radiotherapy practices with Linear Accelerators (Linac), with cobalt 60, and with brachytherapy. These evaluations were made throughout the risk assessment tool for radiotherapy practices SEVRRA (risk evaluation system for radiotherapy), developed at the Mexican National Commission in Nuclear Safety and Safeguards derived from the outcome obtained with the Probabilistic Safety Analysis developed at the Ibero-American Regulators Forum for these radiotherapy facilities. The methodology used is supported by risk matrices method, a mathematical tool that estimates the risk to the patient, radiation workers and public from mechanical failures, mis calibration of the devices, human mistakes, and so. The initiating events are defined as those undesirable events that, together with other failures, can produce a delivery of an over-dose or an under-dose of the medical prescribed dose, to the planned target volume, or a significant dose to non prescribed human organs. Initiating events frequency and reducer of its frequency (actions intended to avoid the accident) are estimated as well as robustness of barriers to those actions, such as mechanical switches, which detect and prevent the accident from occurring. The spectrum of the consequences is parameterized, and the actions performed to reduce the consequences are identified. Based on this analysis, a software tool was developed in order to simplify the evaluations to radiotherapy installations and it has been applied as a first step forward to some Mexican installations, as part of a national implementation process, the final goal is evaluation of all Mexican facilities in the near future. The main target and benefits of the SEVRRA implementation are presented in this paper. (Author)

Implementation of a risk assessment tool based on a probabilistic safety assessment developed for radiotherapy practices

Energy Technology Data Exchange (ETDEWEB)

Paz, A.; Godinez, V.; Lopez, R., E-mail: abpaz@cnsns.gob.m [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico)

2010-10-15

The present work describes the implementation process and main results of the risk assessment to the radiotherapy practices with Linear Accelerators (Linac), with cobalt 60, and with brachytherapy. These evaluations were made throughout the risk assessment tool for radiotherapy practices SEVRRA (risk evaluation system for radiotherapy), developed at the Mexican National Commission in Nuclear Safety and Safeguards derived from the outcome obtained with the Probabilistic Safety Analysis developed at the Ibero-American Regulators Forum for these radiotherapy facilities. The methodology used is supported by risk matrices method, a mathematical tool that estimates the risk to the patient, radiation workers and public from mechanical failures, mis calibration of the devices, human mistakes, and so. The initiating events are defined as those undesirable events that, together with other failures, can produce a delivery of an over-dose or an under-dose of the medical prescribed dose, to the planned target volume, or a significant dose to non prescribed human organs. Initiating events frequency and reducer of its frequency (actions intended to avoid the accident) are estimated as well as robustness of barriers to those actions, such as mechanical switches, which detect and prevent the accident from occurring. The spectrum of the consequences is parameterized, and the actions performed to reduce the consequences are identified. Based on this analysis, a software tool was developed in order to simplify the evaluations to radiotherapy installations and it has been applied as a first step forward to some Mexican installations, as part of a national implementation process, the final goal is evaluation of all Mexican facilities in the near future. The main target and benefits of the SEVRRA implementation are presented in this paper. (Author)

Model of MSD Risk Assessment at Workplace

OpenAIRE

K. Sekulová; M. Šimon

2015-01-01

This article focuses on upper-extremity musculoskeletal disorders risk assessment model at workplace. In this model are used risk factors that are responsible for musculoskeletal system damage. Based on statistic calculations the model is able to define what risk of MSD threatens workers who are under risk factors. The model is also able to say how MSD risk would decrease if these risk factors are eliminated.

Framework for Shared Drinking Water Risk Assessment.

Energy Technology Data Exchange (ETDEWEB)

Lowry, Thomas Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Tidwell, Vincent C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Peplinski, William John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mitchell, Roger [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Binning, David [AEM Corp., Herndon, VA (United States); Meszaros, Jenny [AEM Corp., Herndon, VA (United States)

2017-01-01

Central to protecting our nation's critical infrastructure is the development of methodologies for prioritizing action and supporting resource allocation decisions associated with risk-reduction initiatives. Toward this need a web-based risk assessment framework that promotes the anonymous sharing of results among water utilities is demonstrated. Anonymous sharing of results offers a number of potential advantages such as assistance in recognizing and correcting bias, identification of 'unknown, unknowns', self-assessment and benchmarking for the local utility, treatment of shared assets and/or threats across multiple utilities, and prioritization of actions beyond the scale of a single utility. The constructed framework was demonstrated for three water utilities. Demonstration results were then compared to risk assessment results developed using a different risk assessment application by a different set of analysts.

Concept of risk: risk assessment and nuclear safety

International Nuclear Information System (INIS)

Thompson, P.B.

1980-01-01

The dissertation is a critical examination of risk assessment and its role in public policy. Nuclear power safety safety issues are selected as the primary source of illustrations and examples. The dissertation examines how risk assessment studies develop a concept of risk which becomes decisive for policy choices. Risk-assessment techniques are interpreted as instruments which secure an evaluation of risk which, in turn, figures prominently in technical reports on nuclear power. The philosophical critique is mounted on two levels. First, an epistemological critique surveys distinctions between the technical concept of risk and more familiar senses of risk. The critique shows that utilization of risk assessment re-structures the concept of risk. The technical concept is contrasted to the function of risk within a decision-maker's conceptual agenda and hierarchy of values. Second, an ethical critique exposes the value commitments of risk assessment recommendations. Although some of these values might be defended for policy decisions, the technical character of risk assessment obfuscates normative issues. Risk assessment is shown to be a form of factual enquiry which, nonetheless, represents a commitment to a specific selection of ethical and social values. Risk assessment should not be interpreted as a primary guide to decision unless the specific values incorporated into its concept of risk are stated explicitly and justified philosophically. Such a statement would allow value questions which have been sublimated by the factual tone of the analytic techniques to be debated on clear, social and ethical grounds

Dutch Risk Assessment tools

NARCIS (Netherlands)

Venema, A.

2015-01-01

The ‘Risico- Inventarisatie- en Evaluatie-instrumenten’ is the name for the Dutch risk assessment (RA) tools. A RA tool can be used to perform a risk assessment including an evaluation of the identified risks. These tools were among the first online risk assessment tools developed in Europe. The

Risk assessment and nuclear power

International Nuclear Information System (INIS)

Bodansky, D.

1982-01-01

The range of risk perceptions involving nuclear power is so great that there is little hope of bridging extreme positions, but a consensus based upon reasoned discussion among uncommitted people could determine a sensible path. Our concerns over the uncertainties of risk assessment have made it increasingly difficult to make responsible decisions fast enough to deal with modern needs. The result is an immobility in energy matters that can point to a 2% reduction in oil use as its only triumph. The risk of nuclear war as a result of military action over energy issues suggests to some that the solution is to abolish nuclear power (however impractical) and to others that a rapid spread of nuclear power will eliminate energy as an incentive for war. If nuclear war is the major risk to consider, risk assessments need to include the risks of war, as well as those of carbon dioxide buildup and socio-economic disruptions, all of which loom larger than the risks of nuclear-plant accidents. Energy choices should be aimed at diminishing these major risks, even if they include the use of nuclear power. 26 references

Risk, surprises and black swans fundamental ideas and concepts in risk assessment and risk management

CERN Document Server

Aven, Terje

2014-01-01

Risk, Surprises and Black Swans provides an in depth analysis of the risk concept with a focus on the critical link to knowledge; and the lack of knowledge, that risk and probability judgements are based on.Based on technical scientific research, this book presents a new perspective to help you understand how to assess and manage surprising, extreme events, known as 'Black Swans'. This approach looks beyond the traditional probability-based principles to offer a broader insight into the important aspects of uncertain events and in doing so explores the ways to manage them.

Subjective risk assessment for planning conservation projects

International Nuclear Information System (INIS)

Game, Edward T; Fitzsimons, James A; Lipsett-Moore, Geoff; McDonald-Madden, Eve

2013-01-01

Conservation projects occur under many types of uncertainty. Where this uncertainty can affect achievement of a project’s objectives, there is risk. Understanding risks to project success should influence a range of strategic and tactical decisions in conservation, and yet, formal risk assessment rarely features in the guidance or practice of conservation planning. We describe how subjective risk analysis tools can be framed to facilitate the rapid identification and assessment of risks to conservation projects, and how this information should influence conservation planning. Our approach is illustrated with an assessment of risks to conservation success as part of a conservation plan for the work of The Nature Conservancy in northern Australia. Risks can be both internal and external to a project, and occur across environmental, social, economic and political systems. Based on the relative importance of a risk and the level of certainty in its assessment we propose a series of appropriate, project level responses including research, monitoring, and active amelioration. Explicit identification, prioritization, and where possible, management of risks are important elements of using conservation resources in an informed and accountable manner. (letter)

Risk-assessment methodology for fast breeder reactors

International Nuclear Information System (INIS)

Ott, K.O.

1976-04-01

The methods applied or proposed for risk assessment of nuclear reactors are reviewed, particularly with respect to their applicability for risk assessment of future commercial fast breeder reactors. All methods are based on the calculation of accident consequences for relatively few accident scenarios. The role and general impact of uncertainties in fast-reactor accident analysis are discussed. The discussion shows the need for improvement of the methodology. A generalized and improved risk-assessment methodology is outlined and proposed (accident-spectra-progression approach). The generalization consists primarily of an explicit treatment of uncertainties throughout the accident progression. The results of this method are obtained in form of consequence distributions. The width and shape of the distributions depend in part on the superposition of the uncertainties. The first moment of the consequence distribution gives an improved prediction of the ''average'' consequence. The higher-consequence moments can be used for consideration of risk aversion. The assessment of the risk of one or a certain number of nuclear reactors can only provide an ''isolated'' risk assessment. The general problem of safety risk assessment and its relation to public acceptance of certain modes of power production is a much broader problem area, which is also discussed

APPROACHES FOR INCORPORATING NON-CHEMICAL STRESSORS INTO CUMULATIVE RISK ASSESSMENTS

Science.gov (United States)

Over the past twenty years, the risk assessment paradigm has gradually shifted from an individual chemical approach to a community-based model. Inherent in community-based risk assessment is consideration of the totality of stressors affecting a defined population including both ...

Risk monitor-a tool for computer aided risk assessment for NPPs

International Nuclear Information System (INIS)

Vinod, Gopika; Saraf, R.K.; Babar, A.K.; Kushwaha, H.S.; Hadap, Nikhil

2001-01-01

Considerable changes occur in components status and system design and subsequent operation due to changes in plant configuration and their operating procedures. These changes are organised because some components are randomly down and other can be planned for test, maintenance and repair. This results in a fluctuation of risk level over operating time, which is termed as risk profile. Probabilistic Safety Assessment (PSA) is an analytical technique for assessing the risk by integrating diverse aspects of design and operation of a Nuclear Power Plant. Risk can be defined as the product of the probability of an accident and the consequences from that accident. Reactor Safety Division of BARC has developed PC based tool, which can assess the risk profile. This package can be used to optimise the operation in Nuclear Power Plants with respect to a minimum risk level over the operating time, and is termed as Risk Monitor. Risk Monitor is user friendly and can re-evaluate core damage frequency for changes in component status, test interval, initiating event frequency etc. Plant restoration advice, when the plant is in high risk configuration, current status of all plant equipment, and equipment prioritization are also provided by the package. (author)

State of risk assessment

International Nuclear Information System (INIS)

Conrad, J.

1978-03-01

In view of the growing importance assumed in recent years by scientific work on the calculation, quantification, evaluation and acceptance as well as behavior in the face of risks in general and more specifically, the risks of large industrial plants, the report attempts to provide a survey of the current situation, results and evaluation of this new branch of research, risk assessment. The emphasis of the report is on the basic discussion and criticism of the theoretical and methodological approaches used in the field of risk assessment (section 3). It is concerned above all with - methodical problems of determining and quantifying risks (3.1) - questions of the possibility of risk evaluation and comp arison (3.1, 3.2) - the premises of normative and empirical studies on decision making under risk (3.2, 3.3) - investigations into society's acceptance of risks involved in the introduction of new technologies (3.4) - attempts to combine various aspects of the field of risk assessment in a unified concept (3.5, 3.6, 3.7). Because risk assessment is embedded in the framework of decision theory and technology assessment, it can be implicitly evaluated at a more general level within this framework, as far as its possibilities and weaknesses of method and application are concerned (section 4). Sections 2 and 5 deal with the social context of origin and utilization of risk assessment. Finally, an attempt is made at a summary indicating the possible future development of risk assessment. (orig./HP) [de

Risk assessment and risk management of mycotoxins.

Science.gov (United States)

2012-01-01

Risk assessment is the process of quantifying the magnitude and exposure, or probability, of a harmful effect to individuals or populations from certain agents or activities. Here, we summarize the four steps of risk assessment: hazard identification, dose-response assessment, exposure assessment, and risk characterization. Risk assessments using these principles have been conducted on the major mycotoxins (aflatoxins, fumonisins, ochratoxin A, deoxynivalenol, and zearalenone) by various regulatory agencies for the purpose of setting food safety guidelines. We critically evaluate the impact of these risk assessment parameters on the estimated global burden of the associated diseases as well as the impact of regulatory measures on food supply and international trade. Apart from the well-established risk posed by aflatoxins, many uncertainties still exist about risk assessments for the other major mycotoxins, often reflecting a lack of epidemiological data. Differences exist in the risk management strategies and in the ways different governments impose regulations and technologies to reduce levels of mycotoxins in the food-chain. Regulatory measures have very little impact on remote rural and subsistence farming communities in developing countries, in contrast to developed countries, where regulations are strictly enforced to reduce and/or remove mycotoxin contamination. However, in the absence of the relevant technologies or the necessary infrastructure, we highlight simple intervention practices to reduce mycotoxin contamination in the field and/or prevent mycotoxin formation during storage.

Qualitative risk assessment as a remediation management tool

International Nuclear Information System (INIS)

Knutson, D.E.

1991-01-01

The technique used to complete this thesis utilizes existing NRC and EPA guidance on health-based risk to qualitatively prioritize preliminary assessments and provide a tool for the direction and management of remediation activities. This method is intended as a decision making tool to aid in prioritizing the remediation effort and manage the remedial investigation and feasibility study (RI/FS) process. It is not a replacement for the RI/FS. The methodology for qualitative risk assessment utilizes data gathered in preliminary assessments and calculates the health-based hazards and consequences from contaminants found at each individual location. The health-based qualitative risk indicated that number-sign 6 fuel oil, carbon tetrachloride, depleted uranium, and enriched uranium were the contaminants of major concern, in that order. Plutonium ranked approximately sixth in the contaminant of concern priority. 38 refs., 1 fig., 9 tabs

Assessing reservoir operations risk under climate change

Science.gov (United States)

Brekke, L.D.; Maurer, E.P.; Anderson, J.D.; Dettinger, M.D.; Townsley, E.S.; Harrison, A.; Pruitt, T.

2009-01-01

Risk-based planning offers a robust way to identify strategies that permit adaptive water resources management under climate change. This paper presents a flexible methodology for conducting climate change risk assessments involving reservoir operations. Decision makers can apply this methodology to their systems by selecting future periods and risk metrics relevant to their planning questions and by collectively evaluating system impacts relative to an ensemble of climate projection scenarios (weighted or not). This paper shows multiple applications of this methodology in a case study involving California's Central Valley Project and State Water Project systems. Multiple applications were conducted to show how choices made in conducting the risk assessment, choices known as analytical design decisions, can affect assessed risk. Specifically, risk was reanalyzed for every choice combination of two design decisions: (1) whether to assume climate change will influence flood-control constraints on water supply operations (and how), and (2) whether to weight climate change scenarios (and how). Results show that assessed risk would motivate different planning pathways depending on decision-maker attitudes toward risk (e.g., risk neutral versus risk averse). Results also show that assessed risk at a given risk attitude is sensitive to the analytical design choices listed above, with the choice of whether to adjust flood-control rules under climate change having considerably more influence than the choice on whether to weight climate scenarios. Copyright 2009 by the American Geophysical Union.

Biosafety Risk Assessment Methodology

Energy Technology Data Exchange (ETDEWEB)

Caskey, Susan Adele [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). International Biological Threat Reduction Program; Gaudioso, Jennifer M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). International Biological Threat Reduction Program; Salerno, Reynolds Mathewson [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). International Biological Threat Reduction Program; Wagner, Stefan M. [Public Health Agency of Canada, Winnipeg, MB (Canada). Canadian Science Centre for Human and Animal Health (CSCHAH); Shigematsu, Mika [National Inst. of Infectious Diseases (NIID), Tokyo (Japan); Risi, George [Infectious Disease Specialists, P.C, Missoula, MT (United States); Kozlovac, Joe [US Dept. of Agriculture (USDA)., Beltsville, MD (United States); Halkjaer-Knudsen, Vibeke [Statens Serum Inst., Copenhagen (Denmark); Prat, Esmeralda [Bayer CropScience, Monheim am Rhein (Germany)

2010-10-01

Laboratories that work with biological agents need to manage their safety risks to persons working the laboratories and the human and animal community in the surrounding areas. Biosafety guidance defines a wide variety of biosafety risk mitigation measures, which include measures which fall under the following categories: engineering controls, procedural and administrative controls, and the use of personal protective equipment; the determination of which mitigation measures should be used to address the specific laboratory risks are dependent upon a risk assessment. Ideally, a risk assessment should be conducted in a manner which is standardized and systematic which allows it to be repeatable and comparable. A risk assessment should clearly define the risk being assessed and avoid over complication.

24 CFR 35.1320 - Lead-based paint inspections, paint testing, risk assessments, lead-hazard screens, and...

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Lead-based paint inspections, paint testing, risk assessments, lead-hazard screens, and reevaluations. 35.1320 Section 35.1320 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT...

THE MODEL FOR RISK ASSESSMENT ERP-SYSTEMS INFORMATION SECURITY

Directory of Open Access Journals (Sweden)

V. S. Oladko

2016-12-01

Full Text Available The article deals with the problem assessment of information security risks in the ERP-system. ERP-system functions and architecture are studied. The model malicious impacts on levels of ERP-system architecture are composed. Model-based risk assessment, which is the quantitative and qualitative approach to risk assessment, built on the partial unification 3 methods for studying the risks of information security - security models with full overlapping technique CRAMM and FRAP techniques developed.

Science-based risk assessments for rare events in a changing climate

Science.gov (United States)

Sobel, A. H.; Tippett, M. K.; Camargo, S. J.; Lee, C. Y.; Allen, J. T.

2014-12-01

History shows that substantial investments in protection against any specific type of natural disaster usually occur only after (usually shortly after) that specific type of disaster has happened in a given place. This is true even when it was well known before the event that there was a significant risk that it could occur. Presumably what psychologists Kahneman and Tversky have called "availability bias" is responsible, at least in part, for these failures to act on known but out-of-sample risks. While understandable, this human tendency prepares us poorly for events which are very rare (on the time scales of human lives) and even more poorly for a changing climate, as historical records become a poorer guide. A more forward-thinking and rational approach would require scientific risk assessments that can place meaningful probabilities on events that are rare enough to be absent from the historical record, and that can account for the influences of both anthropogenic climate change and low-frequency natural climate variability. The set of tools available for doing such risk assessments is still quite limited, particularly for some of the most extreme events such as tropical cyclones and tornadoes. We will briefly assess the state of the art for these events in particular, and describe some of our ongoing research to develop new tools for quantitative risk assessment using hybrids of statistical methods and physical understanding of the hazards.

Risk assessment and risk transfer from an insurerś point of view

Science.gov (United States)

Ebner, G.

2009-04-01

Risk, a word that causes a lot of associations in human brains. Many of us don't like risks. Since hundreds of years insurance is the most common way to get rid of the financial consequences when risks convert to damages. This article deals with commercial risks and the possibilities of risk transfer, an important task within the field of risk management. For commercial entities it is very important to transfer risks, threatening the competitiveness or even worse the existence of a company. At the beginning of insurance it was more the less a bet between merchants and rich people. Later on mutual societies were taking place. Today we see a complex insurance industry with insurers, reinsurers, self insuring possibilities via captives and much more. This complex system, with all the different ways to deal with risk transfer requires a professional risk assessment! Risk assessment is based on knowledge about the threatened assets, the likelihood that they will be damaged, the threats and the possibilities to protect these assets. Assets may be tangible or intangible. Assessing risks is not a precise calculation that delivers a result without any doubt. But insurers and insured need a basis to fix a premium, both of them can agree. This contribution will present a system to assess risks and to find the right risk-transfer-premiums.

Risk-based inspection--Development of guidelines

International Nuclear Information System (INIS)

1993-07-01

Effective inservice inspection programs can play a significant role in minimizing equipment and structural failures. Most of the current inservice inspection programs for light water reactor (LWR) nuclear power plant components are based on experience and engineers' qualitative judgment. These programs include only an implicit consideration of risk, which combines the probability of failure of a component under its operation and loading conditions and the consequences of such failure, if it occurs. This document recommends appropriate methods for establishing a risk-based inspection program for LWR nuclear power plant components. The process has been built from a general methodology (Volume 1) and has been expanded to involve five major steps: defining the system; evaluating qualitative risk assessment results; using this and information from plant probabilistic risk assessments to perform a quantitative risk analysis; selecting target failure probabilities; and developing an inspection program for components using economic decision analysis and structural reliability assessment methods

Ethical aspects of the assessment of technical risks

International Nuclear Information System (INIS)

Birnbacher, D.

1991-01-01

When technology assessment goes over into technology politics, then questions arise which can only be answered in an ethical way. Questions like, which risk strategy has to be the basis for decision-making, and is a decision for or against the development, introduction or maintenance of a certain technology to be based at all on risk assessments? The author considers pure consequentialistic ethics the most plausible option, and does not see a basic difference in a risk-benefit analysis and ethical technology assessment. (DG) [de

Personalized risk communication for personalized risk assessment: Real world assessment of knowledge and motivation for six mortality risk measures from an online life expectancy calculator.

Science.gov (United States)

Manuel, Douglas G; Abdulaziz, Kasim E; Perez, Richard; Beach, Sarah; Bennett, Carol

2018-01-01

In the clinical setting, previous studies have shown personalized risk assessment and communication improves risk perception and motivation. We evaluated an online health calculator that estimated and presented six different measures of life expectancy/mortality based on a person's sociodemographic and health behavior profile. Immediately after receiving calculator results, participants were invited to complete an online survey that asked how informative and motivating they found each risk measure, whether they would share their results and whether the calculator provided information they need to make lifestyle changes. Over 80% of the 317 survey respondents found at least one of six healthy living measures highly informative and motivating, but there was moderate heterogeneity regarding which measures respondents found most informative and motivating. Overall, health age was most informative and life expectancy most motivating. Approximately 40% of respondents would share the results with their clinician (44%) or social networks (38%), although the information they would share was often different from what they found informative or motivational. Online personalized risk assessment allows for a more personalized communication compared to historic paper-based risk assessment to maximize knowledge and motivation, and people should be provided a range of risk communication measures that reflect different risk perspectives.

2007 TOXICOLOGY AND RISK ASSESSMENT ...

Science.gov (United States)

EPA has announced The 2007 Toxicology and Risk Assessment Conference Cincinnati Marriott North, West Chester (Cincinnati), OHApril 23- 26, 2007 - Click to register!The Annual Toxicology and Risk Assessment Conference is a unique meeting where several Government Agencies come together to discuss toxicology and risk assessment issues that are not only of concern to the government, but also to a broader audience including academia and industry. The theme of this year's conference is Emerging Issues and Challenges in Risk Assessment and the preliminary agenda includes: Plenary Sessions and prominent speakers (tentative) include: Issues of Emerging Chemical ContaminantsUncertainty and Variability in Risk Assessment Use of Mechanistic data in IARC evaluationsParallel Sessions:Uncertainty and Variability in Dose-Response Assessment Recent Advances in Toxicity and Risk Assessment of RDX The Use of Epidemiologic Data for Risk Assessment Applications Cumulative Health Risk Assessment:

Advancing environmental risk assessment for transgenic biofeedstock crops

Directory of Open Access Journals (Sweden)

Wolt Jeffrey D

2009-11-01

Full Text Available Abstract Transgenic modification of plants is a key enabling technology for developing sustainable biofeedstocks for biofuels production. Regulatory decisions and the wider acceptance and development of transgenic biofeedstock crops are considered from the context of science-based risk assessment. The risk assessment paradigm for transgenic biofeedstock crops is fundamentally no different from that of current generation transgenic crops, except that the focus of the assessment must consider the unique attributes of a given biofeedstock crop and its environmental release. For currently envisioned biofeedstock crops, particular emphasis in risk assessment will be given to characterization of altered metabolic profiles and their implications relative to non-target environmental effects and food safety; weediness and invasiveness when plants are modified for abiotic stress tolerance or are domesticated; and aggregate risk when plants are platforms for multi-product production. Robust risk assessments for transgenic biofeedstock crops are case-specific, initiated through problem formulation, and use tiered approaches for risk characterization.

Assessing risk from intelligent attacks: A perspective on approaches

International Nuclear Information System (INIS)

Guikema, Seth D.; Aven, Terje

2010-01-01

Assessing the uncertainties in and severity of the consequences of intelligent attacks are fundamentally different from risk assessment for accidental events and other phenomena with inherently random failures. Intelligent attacks against a system involve adaptation on the part of the adversary. The probabilities of the initiating events depend on the risk management actions taken, and they may be more difficult to assess due to high degrees of epistemic uncertainty about the motivations and future actions of adversaries. Several fundamentally different frameworks have been proposed for assessing risk from intelligent attacks. These include basing risk assessment and management on game theoretic modelling of attacker actions, using a probabilistic risk analysis (PRA) approach based on eliciting probabilities of different initiating events from appropriate experts, assessing uncertainties beyond probabilities and expected values, and ignoring the probabilities of the attacks and choosing to protect highest valued targets. In this paper we discuss and compare the fundamental assumptions that underlie each of these approaches. We then suggest a new framework that makes the fundamental assumptions underlying the approaches clear to decision makers and presents them with a suite of results from conditional risk analysis methods. Each of the conditional methods presents the risk from a specified set of fundamental assumptions, allowing the decision maker to see the impacts of these assumptions on the risk management strategies considered and to weight the different conditional results with their assessments of the relative likelihood of the different sets of assumptions.

A probabilistic seismic risk assessment procedure for nuclear power plants: (II) Application

Science.gov (United States)

Huang, Y.-N.; Whittaker, A.S.; Luco, N.

2011-01-01

This paper presents the procedures and results of intensity- and time-based seismic risk assessments of a sample nuclear power plant (NPP) to demonstrate the risk-assessment methodology proposed in its companion paper. The intensity-based assessments include three sets of sensitivity studies to identify the impact of the following factors on the seismic vulnerability of the sample NPP, namely: (1) the description of fragility curves for primary and secondary components of NPPs, (2) the number of simulations of NPP response required for risk assessment, and (3) the correlation in responses between NPP components. The time-based assessment is performed as a series of intensity-based assessments. The studies illustrate the utility of the response-based fragility curves and the inclusion of the correlation in the responses of NPP components directly in the risk computation. ?? 2011 Published by Elsevier B.V.

Probabilistic risk assessment in nuclear power plant regulation

Energy Technology Data Exchange (ETDEWEB)

Wall, J B

1980-09-01

A specific program is recommended to utilize more effectively probabilistic risk assessment in nuclear power plant regulation. It is based upon the engineering insights from the Reactor Safety Study (WASH-1400) and some follow-on risk assessment research by USNRC. The Three Mile Island accident is briefly discussed from a risk viewpoint to illustrate a weakness in current practice. The development of a probabilistic safety goal is recommended with some suggestions on underlying principles. Some ongoing work on risk perception and the draft probabilistic safety goal being reviewed on Canada is described. Some suggestions are offered on further risk assessment research. Finally, some recent U.S. Nuclear Regulatory Commission actions are described.

Risk assessment for pipelines with active defects based on artificial intelligence methods

Energy Technology Data Exchange (ETDEWEB)

Anghel, Calin I. [Department of Chemical Engineering, Faculty of Chemistry and Chemical Engineering, University ' Babes-Bolyai' , Cluj-Napoca (Romania)], E-mail: canghel@chem.ubbcluj.ro

2009-07-15

The paper provides another insight into the pipeline risk assessment for in-service pressure piping containing defects. Beside of the traditional analytical approximation methods or sampling-based methods safety index and failure probability of pressure piping containing defects will be obtained based on a novel type of support vector machine developed in a minimax manner. The safety index or failure probability is carried out based on a binary classification approach. The procedure named classification reliability procedure, involving a link between artificial intelligence and reliability methods was developed as a user-friendly computer program in MATLAB language. To reveal the capacity of the proposed procedure two comparative numerical examples replicating a previous related work and predicting the failure probabilities of pressured pipeline with defects were presented.

Risk assessment for pipelines with active defects based on artificial intelligence methods

International Nuclear Information System (INIS)

Anghel, Calin I.

2009-01-01

The paper provides another insight into the pipeline risk assessment for in-service pressure piping containing defects. Beside of the traditional analytical approximation methods or sampling-based methods safety index and failure probability of pressure piping containing defects will be obtained based on a novel type of support vector machine developed in a minimax manner. The safety index or failure probability is carried out based on a binary classification approach. The procedure named classification reliability procedure, involving a link between artificial intelligence and reliability methods was developed as a user-friendly computer program in MATLAB language. To reveal the capacity of the proposed procedure two comparative numerical examples replicating a previous related work and predicting the failure probabilities of pressured pipeline with defects were presented.

Initiation of health-behaviour change among employees participating in a web-based health risk assessment with tailored feedback

NARCIS (Netherlands)

Colkesen, Ersen B.; Niessen, Maurice A. J.; Peek, Niels; Vosbergen, Sandra; Kraaijenhagen, Roderik A.; van Kalken, Coenraad K.; Tijssen, Jan G. P.; Peters, Ron J. G.

2011-01-01

ABSTRACT: BACKGROUND: Primary prevention programs at the worksite can improve employee health and reduce the burden of cardiovascular disease. Programs that include a web-based health risk assessment (HRA) with tailored feedback hold the advantage of simultaneously increasing awareness of risk and

Documentation design for probabilistic risk assessment

International Nuclear Information System (INIS)

Parkinson, W.J.; von Herrmann, J.L.

1985-01-01

This paper describes a framework for documentation design of probabilistic risk assessment (PRA) and is based on the EPRI document NP-3470 ''Documentation Design for Probabilistic Risk Assessment''. The goals for PRA documentation are stated. Four audiences are identified which PRA documentation must satisfy, and the documentation consistent with the needs of the various audiences are discussed, i.e., the Summary Report, the Executive Summary, the Main Report, and Appendices. The authors recommend the documentation specifications discussed herein as guides rather than rigid definitions

Research on risk assessment for maritime transport of radioactive materials. Preparation of maritime accident data for risk assessment

International Nuclear Information System (INIS)

Odano, Naoteru; Sawada, Ken-ichi; Mochiduki, Hiromitsu; Hirao, Yoshihiro; Asami, Mitsufumi

2010-01-01

Maritime transport of radioactive materials has been playing an important role in the nuclear fuel cycle in Japan. Due to recent increase of transported radioactive materials and diversification of transport packages with enlargement of nuclear research, development and utilization, safety securement for maritime transport of radioactive materials is one of important issues in the nuclear fuel cycle. Based squarely on the current circumstances, this paper summarizes discussion on importance of utilization of results of risk assessment for maritime transport of radioactive materials. A plan for development of comprehensive methodology to assess risks in maritime transport of radioactive materials is also described. Preparations of database of maritime accident to be necessary for risk assessment are also summarized. The prepared data could be utilized for future quantitative risk assessment, such as the event trees and fault trees analyses, for maritime transport of radioactive materials. The frequency of severe accident that the package might be damaged is also estimated using prepared data. (author)

Cost effectiveness of risk-based closures at UST sites

International Nuclear Information System (INIS)

Scruton, K.M.; Baker, J.N.

1995-01-01

Risk-based closures have been achieved at Underground Storage Tank (UST) sites throughout the country for a major transportation company. The risk-based closures were cost-effective because a streamlined risk-based approach was used instead of the generic baseline risk assessment approach. USEPA has recently provided guidance encouraging the use of risk-based methodology for achieving closure at UST sites. The risk-based approach used in achieving the site closures involved an identification of potential human and ecological receptors and exposure pathways, and a comparison of maximum onsite chemical concentrations to applicable or relevant and appropriate requirements (ARARs). The ARARs used in the evaluation included Federal and/or State Maximum Contaminant Levels (MCLs) for groundwater and risk-based screening levels for soils. If the maximum concentrations were above the screening levels, a baseline risk assessment was recommended. In several instances, however, the risk-based approach resulted in a regulatory agency acceptance of a ''no further action'' alternative at UST sites which did not pose a significant threat to human health and the environment. The cost of the streamlined risk-based approach is approximately $3,500, while a baseline risk assessment for the same UST site could cost up to $10,000 or more. The use of the streamlined risk-based approach has proven to be successful for achieving a ''no further action'' outcome for the client at a reasonable cost

The concept of ignorance in a risk assessment and risk management context

International Nuclear Information System (INIS)

Aven, T.; Steen, R.

2010-01-01

There are many definitions of ignorance in the context of risk assessment and risk management. Most refer to situations in which there are lack of knowledge, poor basis for probability assignments and possible outcomes not (fully) known. The purpose of this paper is to discuss the ignorance concept in this setting. Based on a set of risk and uncertainty features, we establish conceptual structures characterising the level of ignorance. These features include the definition of chances (relative frequency-interpreted probabilities) and the existence of scientific uncertainties. Based on these structures, we suggest a definition of ignorance linked to scientific uncertainties, i.e. the lack of understanding of how consequences of the activity are influenced by the underlying factors. In this way, ignorance can be viewed as a condition for applying the precautionary principle. The discussion is also linked to the use and boundaries of risk assessments in the case of large uncertainties, and the methods for classifying risk and uncertainty problems.

Risk assessment of environmentally influenced airway diseases based on time-series analysis.

Science.gov (United States)

Herbarth, O

1995-09-01

Threshold values are of prime importance in providing a sound basis for public health decisions. A key issue is determining threshold or maximum exposure values for pollutants and assessing their potential health risks. Environmental epidemiology could be instrumental in assessing these levels, especially since the assessment of ambient exposures involves relatively low concentrations of pollutants. This paper presents a statistical method that allows the determination of threshold values as well as the assessment of the associated risk using a retrospective, longitudinal study design with a prospective follow-up. Morbidity data were analyzed using the Fourier method, a time-series analysis that is based on the assumption of a high temporal resolution of the data. This method eliminates time-dependent responses like temporal inhomogeneity and pseudocorrelation. The frequency of calls for respiratory distress conditions to the regional Mobile Medical Emergency Service (MMES) in the city of Leipzig were investigated. The entire population of Leipzig served as a pool for data collection. In addition to the collection of morbidity data, air pollution measurements were taken every 30 min for the entire study period using sulfur dioxide as the regional indicator variable. This approach allowed the calculation of a dose-response curve for respiratory diseases and air pollution indices in children and adults. Significantly higher morbidities were observed above a 24-hr mean value of 0.6 mg SO2/m3 air for children and 0.8 mg SO2/m3 for adults.(ABSTRACT TRUNCATED AT 250 WORDS)

How Confident can we be in Flood Risk Assessments?

Science.gov (United States)

Merz, B.

2017-12-01

Flood risk management should be based on risk analyses quantifying the risk and its reduction for different risk reduction strategies. However, validating risk estimates by comparing model simulations with past observations is hardly possible, since the assessment typically encompasses extreme events and their impacts that have not been observed before. Hence, risk analyses are strongly based on assumptions and expert judgement. This situation opens the door for cognitive biases, such as `illusion of certainty', `overconfidence' or `recency bias'. Such biases operate specifically in complex situations with many factors involved, when uncertainty is high and events are probabilistic, or when close learning feedback loops are missing - aspects that all apply to risk analyses. This contribution discusses how confident we can be in flood risk assessments, and reflects about more rigorous approaches towards their validation.

Risk-based regulation: Challenges and opportunities

International Nuclear Information System (INIS)

Bari, R.A.

1995-01-01

Over the last twenty years, man has witnessed a gradual but steady movement toward increased usage of risk-based methods and results in the regulatory process. The ''risk perspective'' as a supportive view to existing (non-risk-based or deterministic) information used in decision making has a firm foothold now in most countries that regulate nuclear power. Furthermore, in the areas outside the nuclear power field, such as health risk assessment, risk-based information is used increasingly to make decisions on potential impacts of chemical, biological, and radiological exposures. Some of the principal concepts and issues that are pertinent to risk-based regulation are reviewed. There is a growing interest in most countries in the use of risk-based methods and results to facilitate decision-making associated with regulatory processes. A summary is presented of the challenges and opportunities related to expanded use of risk-based regulation

Conceptualization and Pilot Testing of a Core Competency-Based Training Workshop in Suicide Risk Assessment and Management: Notes From the Field.

Science.gov (United States)

Cramer, Robert J; Bryson, Claire N; Eichorst, Morgam K; Keyes, Lee N; Ridge, Brittany E

2017-03-01

As professional psychology training programs and continuing education have moved toward competency based approaches, it has become equally important to develop uniform, evidence-based approaches for suicide risk assessment and management. The present article presents a workshop curriculum based on established core competencies in suicide risk assessment and management. Drawing on theories suicide risk formation, the workshop features an integration of didactic, process, and experiential components. We present pilot data from 2 small group workshops (n = 17): 1 from a clinical psychology doctoral program and 1 from a university counseling center. Workshop participation yielded increases in (a) the ability to recognize appropriate clinician responses to suicidal client statements, (b) self-perceptions of general capacity to interface with suicidal patients and mastery of the 10 core competencies, (c) factual knowledge concerning suicide risk assessment and management, and (d) the self-rated ability to assess and manage a suicidal patient. We discuss statistical and generalizability limitations as well as implications for future modification, implementation, and provision of this training method. © 2016 Wiley Periodicals, Inc.

Site remediation guided by risk assessment

International Nuclear Information System (INIS)

McBean, E.A.; Gowing, A.; Pieczonka, G.

2002-01-01

'Full text:' Risk assessment (RA) provides an effective tool for identifying hazards with respect to human health and ecological receptors, hazards that arise from contaminants in the environment. Risk assessment relies upon: hazard identification/problem formulation; toxicity assessment; exposure assessment; and risk characterization. Hence, risk assessment provides an effective guide for site remediation through the identification of the associated risks arising from pre- and potential post-remediation activities. As a demonstration of this decision-making process, a site-specific risk assessment (SSRA) was performed on a chemical producing facility. Historical waste practices during the production of DDT compounds resulted in impacted site soils and sediment and soils of the creek passing through the facility. The purpose of the SSRA was to derive site-specific cleanup values for the impacted on-site soils, creek sediments, and embankment soils, incorporating human and ecological receptors associated with the environmental media. The human exposure pathways considered were dermal contact, incidental ingestion, and inhalation of the various soils. The potential human receptors were industrial workers, construction workers, trespassers, and off-site residents. Ingestion of fish from the creek by residents was also evaluated in the human health risk assessment (HHRA). Food web analyses were used to evaluate the impact of exposure to chemical compounds in aquatic sediments and related soils by ecological receptors such as the great blue heron, raccoon, and mink. The SSRA involved modelling the daily chemical intake by receptors and the transfer of chemicals to identified secondary media (e.g., ambient air or animal tissues) that are also potential exposure media. These models, while using the site-specific chemical data in the source media, possess uncertainties associated with default parameters that are only approximations and not site-specific (e.g., soil

Risk assessment and food allergy: the probabilistic model applied to allergens

NARCIS (Netherlands)

Spanjersberg, M.Q.I.; Kruizinga, A.G.; Rennen, M.A.J.; Houben, G.F.

2007-01-01

In order to assess the risk of unintended exposure to food allergens, traditional deterministic risk assessment is usually applied, leading to inconsequential conclusions as 'an allergic reaction cannot be excluded'. TNO therefore developed a quantitative risk assessment model for allergens based on

Environmental Risk Assessment Strategy for Nanomaterials

Directory of Open Access Journals (Sweden)

Janeck J. Scott‐Fordsmand

2017-10-01

Full Text Available An Environmental Risk Assessment (ERA for nanomaterials (NMs is outlined in this paper. Contrary to other recent papers on the subject, the main data requirements, models and advancement within each of the four risk assessment domains are described, i.e., in the: (i materials, (ii release, fate and exposure, (iii hazard and (iv risk characterisation domains. The material, which is obviously the foundation for any risk assessment, should be described according to the legislatively required characterisation data. Characterisation data will also be used at various levels within the ERA, e.g., exposure modelling. The release, fate and exposure data and models cover the input for environmental distribution models in order to identify the potential (PES and relevant exposure scenarios (RES and, subsequently, the possible release routes, both with regard to which compartment(s NMs are distributed in line with the factors determining the fate within environmental compartment. The initial outcome in the risk characterisation will be a generic Predicted Environmental Concentration (PEC, but a refined PEC can be obtained by applying specific exposure models for relevant media. The hazard information covers a variety of representative, relevant and reliable organisms and/or functions, relevant for the RES and enabling a hazard characterisation. The initial outcome will be hazard characterisation in test systems allowing estimating a Predicted No-Effect concentration (PNEC, either based on uncertainty factors or on a NM adapted version of the Species Sensitivity Distributions approach. The risk characterisation will either be based on a deterministic risk ratio approach (i.e., PEC/PNEC or an overlay of probability distributions, i.e., exposure and hazard distributions, using the nano relevant models.

Environmental Risk Assessment Strategy for Nanomaterials.

Science.gov (United States)

Scott-Fordsmand, Janeck J; Peijnenburg, Willie J G M; Semenzin, Elena; Nowack, Bernd; Hunt, Neil; Hristozov, Danail; Marcomini, Antonio; Irfan, Muhammad-Adeel; Jiménez, Araceli Sánchez; Landsiedel, Robert; Tran, Lang; Oomen, Agnes G; Bos, Peter M J; Hund-Rinke, Kerstin

2017-10-19

An Environmental Risk Assessment (ERA) for nanomaterials (NMs) is outlined in this paper. Contrary to other recent papers on the subject, the main data requirements, models and advancement within each of the four risk assessment domains are described, i.e., in the: (i) materials, (ii) release, fate and exposure, (iii) hazard and (iv) risk characterisation domains. The material, which is obviously the foundation for any risk assessment, should be described according to the legislatively required characterisation data. Characterisation data will also be used at various levels within the ERA, e.g., exposure modelling. The release, fate and exposure data and models cover the input for environmental distribution models in order to identify the potential (PES) and relevant exposure scenarios (RES) and, subsequently, the possible release routes, both with regard to which compartment(s) NMs are distributed in line with the factors determining the fate within environmental compartment. The initial outcome in the risk characterisation will be a generic Predicted Environmental Concentration (PEC), but a refined PEC can be obtained by applying specific exposure models for relevant media. The hazard information covers a variety of representative, relevant and reliable organisms and/or functions, relevant for the RES and enabling a hazard characterisation. The initial outcome will be hazard characterisation in test systems allowing estimating a Predicted No-Effect concentration (PNEC), either based on uncertainty factors or on a NM adapted version of the Species Sensitivity Distributions approach. The risk characterisation will either be based on a deterministic risk ratio approach (i.e., PEC/PNEC) or an overlay of probability distributions, i.e., exposure and hazard distributions, using the nano relevant models.

Center for Advancing Microbial Risk Assessment

Data.gov (United States)

Federal Laboratory Consortium — The Center for Advancing Microbial Risk Assessment (CAMRA), based at Michigan State University and jointly funded by the U.S. Department of Homeland Security and the...

Hanford Site's Integrated Risk Assessment Program: No-intervention risk assessment

International Nuclear Information System (INIS)

Mahaffey, J.A.; Dukelow, J.S. Jr.; Stenner, R.D.

1994-08-01

The long-term goal of the Integrated Risk Assessment program (IRAP) is to estimate risks to workers, the public, organizations, and groups with reserved rights to Site access, the ecosystem, and natural resources to aid in managing environmental restoration and waste management at the Hanford Site. For each of these, information is needed about current risks, risks during cleanup, and endstate risks. The objective is three-fold: to determine if and when to remediate, and to what extent; to identify information unavailable but needed to make better cleanup decisions; to establish technology performance criteria for achieving desired cleanup levels; to understand costs and benefits of activities from a Site-wide perspective. The no-intervention risk, assessment is the initial evaluation of public health risks conducted under IRAP. The objective is to identify types of activities that the US Department of Energy (DOE) must accomplish for closure of the Hanford Site, defined as no further DOE intervention. There are two primary conclusions from the no-intervention risk assessment. First, some maintenance and operations activities at Hanford must be continued to protect the public from grave risks. However, when large Hanford expenditures are compared to cleanup progress, funds expended for maintenance and operations must be put in proper perspective. Second, stakeholder's emphasis on public risks at Hanford, as indicated by remediation priorities, are not in line with those estimated. The focus currently is on compliance with regulations, and on dealing with issues which are visible to stakeholders

A survey of ecological risk assessment at DOE facilities

International Nuclear Information System (INIS)

Barnthouse, L.W.; Bascietto, J.; Joseph, T.; Bilyard, G.

1992-01-01

The US Department of Energy (DOE) Risk-Based Standards Working Group is studying standard-setting and remedial action based on realistic estimates of human health and ecological risks. Federal and state regulations require DOE to assess ecological risks due to present and past operation of DOE facilities and ecological damage caused by remedial actions. Unfortunately, little technical guidance has been provided by regulatory agencies about how these assessments should be performed or what constitutes an adequate assessment. Active ecological research, environmental characterization, and ecological risk assessment programs are already underway at many locations. Some of these programs were established more than 30 years ago. Because of the strength of its existing programs and the depth of expertise available within the DOE complex, the agency is in a position to lead in developing ecological risk assessment procedures that are fully consistent with the general principles defined by EPA and that will ensure environmentally sound and cost-effective restoration of its sites. As a prelude to guidance development, the working group conducted a survey of ecological risk assessment activities at a subset of major DOE facilities. The survey was intended to (1) identify approaches now being used in ecological risk assessments performed by DOE staff and contractors at each site, (2) record successes and failures of these approaches, (3) identify new technical developments with potential for general application to many DOE facilities, and (4) identify major data needs, data resources, and methodological deficiencies

Development of Triad approach based system for ecological risk assessment for contaminated areas of Kyrgyzstan

Science.gov (United States)

Kydralieva, Kamilia; Uzbekov, Beksultan; Khudaibergenova, Bermet; Terekhova, Vera; Jorobekova, Sharipa

2014-05-01

This research is aimed to develop a high-effective system of an ecological risk assessment and risk-based decision making for anthropogenic ecosystems, with particular focus on the soils of the Kyrgyz Republic. The study is focused on the integration of Triad data including chemical, biological and ecotoxicological soil markers to estimate the potential risk from soils of highly anthropized areas impacted by deposition of different pollutants from mining operation. We focus on technogenic areas of Kyrgyzstan, the former uranium-producing province. Triad-based ecological risk assessment for technogenic sites are not currently used in Kyrgyzstan. However, the vitality of such research is self-evident. There are about 50 tailing dumps and more than 80 tips of radioactive waste which are formed as a result of uranium and complex ores (mercury, antimony, lead, cadmium and etc) mining around the unfavorable aforementioned places. According to the Mining Wastes' Tailings and Fills Rehabilitation Centre established in 1999 by a special Government's Resolution, one of the most ecologically dangerous uranium tailings resides in Kadzhi-Say. Although uranium processing is no longer practiced in Kadzhi-Say, a large number of open landfills and uranium ore storages still remain abandoned at the vicinity of this settlement. These neglected sites have enormous problems associated with soil erosion known as "technogenic deserts". The upper soil horizons are deprived of humus and vegetation, which favor the formation of low-buffer landscapes in the zones of maximum contamination. As a result, most of these areas are not re-cultivated and remain in critical environmental condition (Bykovchenko, et al., 2005; Tukhvatshin, 2005; Suranova, 2006). Triad data for assessing environmental risk and biological vulnerability at contaminated sites will be integrated. The following Triad-based parameters will be employed: 1) chemical soil analyses (revealing the presence of potentially dangerous

Chemical Risk Assessment

Science.gov (United States)

This course is aimed at providing an overview of the fundamental guiding principles and general methods used in chemical risk assessment. Chemical risk assessment is a complex and ever-evolving process. These principles and methods have been organized by the National Research Cou...

Research needs for risk-informed, performance-based regulations

International Nuclear Information System (INIS)

Thadani, A.C.

1997-01-01

This article summarizes the activities of the Office of Research of the NRC, both from a historical aspect as well as it applies to the application of risk-based decision making. The office has been actively involved in problems related to understanding risks related to core accidents, to understanding the problem of aging of reactor components and materials from years of service, and toward the understanding and analysis of severe accidents. In addition new policy statements regarding the role of risk assessment in regulatory applications has given focus for the need of further work. The NRC has used risk assessment in regulatory questions in the past but in a fairly ad hoc sort of manner. The new policies will clearly require a better defined application of risk assessment, and help for people evaluating applications in judging the applicability of such applications when a component of them is based on risk-based decision making. To address this, standard review plans are being prepared to serve as guides for such questions. In addition, with regulatory decisions being allowed to be based upon risk-based decisions, it is necessary to have an adequate data base prepared, and made publically available, to support such a position

An integrated risk assessment approach: Risk assessment in the programmatic environmental impact statement

International Nuclear Information System (INIS)

Morris, J.M.

1994-01-01

The following paper is an informal summary of salient points made in the presentation entitled open-quotes An Integrated Risk Assessment Approach: Risk Assessment in the Programmatic Environmental Impact Statement (PEIS).close quotes. This presentation was given at the U.S. DOE Integrated Planning Workshop in Denver, Colorado on June 2, 1994. Integrated decision analysis is very important in environmental restoration and waste management in the evaluation of such things as land use planning, waste load forecasting, cost analyses, and technology development activities. Integrated risk assessment is an approach that addresses multiple components of risk, including: risks from surplus facilities as well as typical environmental restoration sites, risks to the public, risks to workers, ecological risk, risks before, during and after remediation activities, and others

DALY-Based Health Risk Assessment of Construction Noise in Beijing, China

Science.gov (United States)

Xiao, Jun; Li, Xiaodong; Zhang, Zhihui

2016-01-01

Noise produced by construction activities has become the second most serious acoustic polluting element in China. To provide industry practitioners with a better understanding of the health risks of construction noise and to aid in creating environmentally friendly construction plans during early construction stages, we developed a quantitative model to assess the health impairment risks (HIA) associated with construction noise for individuals living adjacent to construction sites. This model classifies noise-induced health impairments into four categories: cardiovascular disease, cognitive impairment, sleep disturbance, and annoyance, and uses disability-adjusted life years (DALYs) as an indicator of damage. Furthermore, the value of a statistical life (VSL) is used to transform DALYs into a monetary value based on the affected demographic characteristics, thereby offering policy makers a reliable theoretical foundation for establishing reasonable standards to compensate residents suffering from construction noise. A practical earthwork project in Beijing is used as a case study to demonstrate the applicability of the proposed model. The results indicate that construction noise could bring significant health risks to the neighboring resident community, with an estimated 34.51 DALYs of health damage and 20.47 million yuan in social costs. In particular, people aged 45–54 are most vulnerable to construction noise, with the greatest health risks being caused by sleep disturbance. PMID:27792207

Comparative Risk Assessment to Inform Adaptation Priorities for the Natural Environment: Observations from the First UK Climate Change Risk Assessment

Directory of Open Access Journals (Sweden)

Iain Brown

2015-11-01

Full Text Available Risk assessment can potentially provide an objective framework to synthesise and prioritise climate change risks to inform adaptation policy. However, there are significant challenges in the application of comparative risk assessment procedures to climate change, particularly for the natural environment. These challenges are evaluated with particular reference to the first statutory Climate Change Risk Assessment (CCRA and evidence review procedures used to guide policy for the UK government. More progress was achieved on risk identification, screening and prioritisation compared to risk quantification. This was due to the inherent complexity and interdependence of ecological risks and their interaction with socio-economic drivers as well as a climate change. Robust strategies to manage risk were identified as those that coordinate organisational resources to enhance ecosystem resilience, and to accommodate inevitable change, rather than to meet specific species or habitats targets. The assessment also highlighted subjective and contextual components of risk appraisal including ethical issues regarding the level of human intervention in the natural environment and the proposed outcomes of any intervention. This suggests that goals for risk assessment need to be more clearly explicated and assumptions on tolerable risk declared as a primer for further dialogue on expectations for managed outcomes. Ecosystem-based adaptation may mean that traditional habitats and species conservation goals and existing regulatory frameworks no longer provide the best guide for long-term risk management thereby challenging the viability of some existing practices.

The relation of risk assessment and health impact assessment

DEFF Research Database (Denmark)

Ádám, Balázs; Gulis, Gabriel

2013-01-01

than assessing a present situation. As part of this process, however, methods applied in risk assessment are used. Risk assessment typically characterises relation of a well-defined risk factor to a well-defined health outcome. Within HIA usually several individual risk assessments are needed...... of the causal chain from the proposal through related health determinants and risk factors to health outcomes. The stepwise analysis, systematic prioritization and consideration of horizontal interactions between the causal pathways make it feasible to use widely recognized risk assessment methods in the HIA......The level and distribution of health risks in a society is substantially influenced by measures of various policies, programmes or projects. Risk assessment can evaluate the nature, likelihood and severity of an adverse effect. Health impact assessment (HIA) provides similar function when used...

Assessment of cardiovascular risk.

LENUS (Irish Health Repository)

Cooney, Marie Therese

2010-10-01

Atherosclerotic cardiovascular disease (CVD) is the most common cause of death worldwide. Usually atherosclerosis is caused by the combined effects of multiple risk factors. For this reason, most guidelines on the prevention of CVD stress the assessment of total CVD risk. The most intensive risk factor modification can then be directed towards the individuals who will derive the greatest benefit. To assist the clinician in calculating the effects of these multiple interacting risk factors, a number of risk estimation systems have been developed. This review address several issues regarding total CVD risk assessment: Why should total CVD risk be assessed? What risk estimation systems are available? How well do these systems estimate risk? What are the advantages and disadvantages of the current systems? What are the current limitations of risk estimation systems and how can they be resolved? What new developments have occurred in CVD risk estimation?

A School-Based Suicide Risk Assessment Protocol

Science.gov (United States)

Boccio, Dana E.

2015-01-01

Suicide remains the third leading cause of death among young people in the United States. Considering that youth who contemplate suicide generally exhibit warning signs before engaging in lethal self-harm, school-based mental health professionals can play a vital role in identifying students who are at risk for suicidal behavior. Nevertheless, the…

An early warning system for groundwater pollution based on the assessment of groundwater pollution risks.

Science.gov (United States)

Zhang, Weihong.; Zhao, Yongsheng; Hong, Mei; Guo, Xiaodong

2009-04-01

Groundwater pollution usually is complex and concealed, remediation of which is difficult, high cost, time-consuming, and ineffective. An early warning system for groundwater pollution is needed that detects groundwater quality problems and gets the information necessary to make sound decisions before massive groundwater quality degradation occurs. Groundwater pollution early warning were performed by considering comprehensively the current groundwater quality, groundwater quality varying trend and groundwater pollution risk . The map of the basic quality of the groundwater was obtained by fuzzy comprehensive evaluation or BP neural network evaluation. Based on multi-annual groundwater monitoring datasets, Water quality state in sometime of the future was forecasted using time-sequenced analyzing methods. Water quality varying trend was analyzed by Spearman's rank correlative coefficient.The relative risk map of groundwater pollution was estimated through a procedure that identifies, cell by cell,the values of three factors, that is inherent vulnerability, load risk of pollution source and contamination hazard. DRASTIC method was used to assess inherent vulnerability of aquifer. Load risk of pollution source was analyzed based on the potential of contamination and pollution degree. Assessment index of load risk of pollution source which involves the variety of pollution source, quantity of contaminants, releasing potential of pollutants, and distance were determined. The load risks of all sources considered by GIS overlay technology. Early warning model of groundwater pollution combined with ComGIS technology organically, the regional groundwater pollution early-warning information system was developed, and applied it into Qiqiha'er groundwater early warning. It can be used to evaluate current water quality, to forecast water quality changing trend, and to analyze space-time influencing range of groundwater quality by natural process and human activities. Keywords

Risk-based decisionmaking (Panel)

Energy Technology Data Exchange (ETDEWEB)

Smith, T.H.

1995-12-31

By means of a panel discussion and extensive audience interaction, explore the current challenges and progress to date in applying risk considerations to decisionmaking related to low-level waste. This topic is especially timely because of the proposed legislation pertaining to risk-based decisionmaking and because of the increased emphasis placed on radiological performance assessments of low-level waste disposal.

Association between metabolic syndrome and bone fracture risk: A community-based study using a fracture risk assessment tool.

Science.gov (United States)

Yu, Chia-Ying; Chen, Fang-Ping; Chen, Li-Wei; Kuo, Sheng-Fong; Chien, Rong-Nan

2017-12-01

Osteoporosis and metabolic syndrome (MS) share similar risk factors. Previous studies of association between bone marrow density (BMD) and MS are controversial. Moreover, some studies revealed that MS is associated with BMD but not with bone fracture. In clinical practice, patients pay more attention to bone fracture risk than BMD values. Hence, this study aimed to evaluate the association between MS and the 10-year bone fracture risk probability using a fracture risk assessment tool (FRAX) from community-based data. From March 2014 to August 2015, 2689 participants (897 men and 1792 women) were enrolled in this study. Inflammatory cytokines, such as tumor necrosis factor alpha and C-reactive protein, and adipokines were included for analysis.The mean age was 60.2 ± 10.7 years in men and 58.9 ± 9.6 years in women. The percentage of MS was 27.6% in men and 27.9% in women. Participants were divided into 2 groups, those with or without MS. Compared with women without MS, women with MS had a higher rate of fracture risk (22.8% vs 16.3%, P = .001). In contrast, men with MS had a lower rate of fracture risk then men without MS (5.6% vs 12.3%, P = .004). However, MS loss the association with a high bone fracture risk in men based on multivariate logistical regression analysis, after adjusting for confounding factor of body mass index (BMI). Conclusively, the result of regression analysis between MS and the bone fracture risk may be different in men and women, and BMI was an important confounding factor to interfere with the regression analysis. Copyright © 2017 The Authors. Published by Wolters Kluwer Health, Inc. All rights reserved.

Recommendations for benefit-risk assessment methodologies and visual representations

DEFF Research Database (Denmark)

Hughes, Diana; Waddingham, Ed; Mt-Isa, Shahrul

2016-01-01

PURPOSE: The purpose of this study is to draw on the practical experience from the PROTECT BR case studies and make recommendations regarding the application of a number of methodologies and visual representations for benefit-risk assessment. METHODS: Eight case studies based on the benefit......-risk balance of real medicines were used to test various methodologies that had been identified from the literature as having potential applications in benefit-risk assessment. Recommendations were drawn up based on the results of the case studies. RESULTS: A general pathway through the case studies...

Risk assessment - a research program aimed at health risks from air pollution in the general environment

International Nuclear Information System (INIS)

Lindahl-Kiessling, K.; Ahlborg, U.; Bylin, G.; Ehrenberg, L.; Hemminki, K.; Lindell, B.; Nilsson, Robert; Bostroem, C.E.; Swarn, U.

1991-01-01

The paper presents a new research program for assessment of health risks caused by air pollutants. It is important to develop general methods for quantitative risk assessments and to improve the scientific base materials. (KAE)

Systematic Suicide Risk Assessment for Patients With Schizophrenia

DEFF Research Database (Denmark)

Pedersen, Charlotte Gjørup; Wallenstein Jensen, Signe Olrik; Gradus, Jaimie

2013-01-01

Objectives: Systematic suicide risk assessment is recommended for patients with schizophrenia; however, little is known about the implementation of suicide risk assessment in routine clinical practice. The study aimed to determine the use of systematic suicide risk assessment at discharge...... and predictors of suicide attempt among hospitalized patients with schizophrenia in Denmark. Methods: A one-year follow-up study was conducted of 9,745 patients with schizophrenia who were discharged from psychiatric wards and registered in a national population-based schizophrenia registry between 2005 and 2009....... Results: The proportion of patients receiving suicide risk assessment at discharge from a psychiatric ward increased from 72% (95% confidence interval [CI]=71%-74%) in 2005, when the national monitoring began, to 89% (CI.89%-90%) in 2009. Within one year after discharge, 1% of all registered patients had...

Disease state fingerprint for fall risk assessment.

Science.gov (United States)

Similä, Heidi; Immonen, Milla

2014-01-01

Fall prevention is an important and complex multifactorial challenge, since one third of people over 65 years old fall at least once every year. A novel application of Disease State Fingerprint (DSF) algorithm is presented for holistic visualization of fall risk factors and identifying persons with falls history or decreased level of physical functioning based on fall risk assessment data. The algorithm is tested with data from 42 older adults, that went through a comprehensive fall risk assessment. Within the study population the Activities-specific Balance Confidence (ABC) scale score, Berg Balance Scale (BBS) score and the number of drugs in use were the three most relevant variables, that differed between the fallers and non-fallers. This study showed that the DSF visualization is beneficial in inspection of an individual's significant fall risk factors, since people have problems in different areas and one single assessment scale is not enough to expose all the people at risk.

INFORMATION SECURITY RISK ASSESSMENT USING EXISTING LEGAL AND METHODOLOGICAL BASE

Directory of Open Access Journals (Sweden)

A. I. Trubei

2015-01-01

Full Text Available The article provides a survey of the existing regulatory framework for information security riskmanagement. Practical methods for information security risk and vulnerability assessment are proposed.

Fuzzy net present valuation based on risk assessment of Malaysian infrastructure

Science.gov (United States)

Shaffie, Siti Salihah; Jaaman, Saiful Hafizah; Mohamad, Daud

2017-04-01

In recent years, built-operate-transfer (BOT) projects have profoundly been accepted under project financing for infrastructure developments in many countries. It requires high financing and involves complex mutual risk. The assessment of the risks is vital to avert huge financial loss. Net present value is widely applied to BOT project where the uncertainties in cash flows are deemed to be deterministic values. This study proposed a fuzzy net present value model taking consideration the assessment of risks from the BOT project. The proposed model is adopted to provide more flexible net present valuation of the project. It is shown and proven that the improved fuzzy cash flow model will provide a valuation that is closed to the real value of the project.

Determination and risk assessment of naturally occurring genotoxic and carcinogenic alkenylbenzenes in nutmeg-based plant food supplements

NARCIS (Netherlands)

Al-Malahmeh, Amer J.; Alajlouni, Abdul; Ning, Jia; Wesseling, Sebas; Vervoort, Jacques; Rietjens, Ivonne M.C.M.

2017-01-01

A risk assessment of nutmeg-based plant food supplements (PFS) containing different alkenylbenzenes was performed based on the alkenylbenzene levels quantified in a series of PFS collected via the online market. The estimated daily intake (EDI) of the alkenylbenzenes amounted to 0.3 to 312μg kg-1

Risk-based decision analysis for groundwater operable units

International Nuclear Information System (INIS)

Chiaramonte, G.R.

1995-01-01

This document proposes a streamlined approach and methodology for performing risk assessment in support of interim remedial measure (IRM) decisions involving the remediation of contaminated groundwater on the Hanford Site. This methodology, referred to as ''risk-based decision analysis,'' also supports the specification of target cleanup volumes and provides a basis for design and operation of the groundwater remedies. The risk-based decision analysis can be completed within a short time frame and concisely documented. The risk-based decision analysis is more versatile than the qualitative risk assessment (QRA), because it not only supports the need for IRMs, but also provides criteria for defining the success of the IRMs and provides the risk-basis for decisions on final remedies. For these reasons, it is proposed that, for groundwater operable units, the risk-based decision analysis should replace the more elaborate, costly, and time-consuming QRA

Task-based dermal exposure models for regulatory risk assessment.

Science.gov (United States)

Warren, Nicholas D; Marquart, Hans; Christopher, Yvette; Laitinen, Juha; VAN Hemmen, Joop J

2006-07-01

The regulatory risk assessment of chemicals requires the estimation of occupational dermal exposure. Until recently, the models used were either based on limited data or were specific to a particular class of chemical or application. The EU project RISKOFDERM has gathered a considerable number of new measurements of dermal exposure together with detailed contextual information. This article describes the development of a set of generic task-based models capable of predicting potential dermal exposure to both solids and liquids in a wide range of situations. To facilitate modelling of the wide variety of dermal exposure situations six separate models were made for groupings of exposure scenarios called Dermal Exposure Operation units (DEO units). These task-based groupings cluster exposure scenarios with regard to the expected routes of dermal exposure and the expected influence of exposure determinants. Within these groupings linear mixed effect models were used to estimate the influence of various exposure determinants and to estimate components of variance. The models predict median potential dermal exposure rates for the hands and the rest of the body from the values of relevant exposure determinants. These rates are expressed as mg or microl product per minute. Using these median potential dermal exposure rates and an accompanying geometric standard deviation allows a range of exposure percentiles to be calculated.

A Knowledge-Based Model of Audit Risk

OpenAIRE

Dhar, Vasant; Lewis, Barry; Peters, James

1988-01-01

Within the academic and professional auditing communities, there has been growing concern about how to accurately assess the various risks associated with performing an audit. These risks are difficult to conceptualize in terms of numeric estimates. This article discusses the development of a prototype computational model (computer program) that assesses one of the major audit risks -- inherent risk. This program bases most of its inferencing activities on a qualitative model of a typical bus...

Risk assessment techniques for civil aviation security

Energy Technology Data Exchange (ETDEWEB)

Tamasi, Galileo, E-mail: g.tamasi@enac.rupa.i [Ente Nazionale per l' Aviazione Civile-Direzione Progetti, Studi e Ricerche, Via di Villa Ricotti, 42, 00161 Roma (Italy); Demichela, Micaela, E-mail: micaela.demichela@polito.i [SAfeR-Centro Studi su Sicurezza, Affidabilita e Rischi, Dipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, Corso Duca degli Abruzzi, 24, 10129 Torino (Italy)

2011-08-15

Following the 9/11 terrorists attacks in New York a strong economical effort was made to improve and adapt aviation security, both in infrastructures as in airplanes. National and international guidelines were promptly developed with the objective of creating a security management system able to supervise the identification of risks and the definition and optimization of control measures. Risk assessment techniques are thus crucial in the above process, since an incorrect risk identification and quantification can strongly affect both the security level as the investments needed to reach it. The paper proposes a set of methodologies to qualitatively and quantitatively assess the risk in the security of civil aviation and the risk assessment process based on the threats, criticality and vulnerabilities concepts, highlighting their correlation in determining the level of risk. RAMS techniques are applied to the airport security system in order to analyze the protection equipment for critical facilities located in air-side, allowing also the estimation of the importance of the security improving measures vs. their effectiveness.

Risk assessment techniques for civil aviation security

International Nuclear Information System (INIS)

Tamasi, Galileo; Demichela, Micaela

2011-01-01

Following the 9/11 terrorists attacks in New York a strong economical effort was made to improve and adapt aviation security, both in infrastructures as in airplanes. National and international guidelines were promptly developed with the objective of creating a security management system able to supervise the identification of risks and the definition and optimization of control measures. Risk assessment techniques are thus crucial in the above process, since an incorrect risk identification and quantification can strongly affect both the security level as the investments needed to reach it. The paper proposes a set of methodologies to qualitatively and quantitatively assess the risk in the security of civil aviation and the risk assessment process based on the threats, criticality and vulnerabilities concepts, highlighting their correlation in determining the level of risk. RAMS techniques are applied to the airport security system in order to analyze the protection equipment for critical facilities located in air-side, allowing also the estimation of the importance of the security improving measures vs. their effectiveness.

EVALUATION OF MILITARY ACTIVITY IMPACT ON HUMANS THROUGH A PROBABILISTIC ECOLOGICAL RISK ASSESSMENT. EXAMPLE OF A FORMER MISSILE BASE.

Directory of Open Access Journals (Sweden)

Sergiy ОREL

2015-10-01

Full Text Available The current article provides a methodology focused on the assessment of environmental factors after termination of military activity and uses a former missile base as an example. The assessment of environmental conditions is performed through an evaluation of the risks posed by the hazardous chemicals contained by underground and surface water sources and soil to human health . Moreover, by conducting deterministic and probabilistic risk assessments, the article determines that the probabilistic assessment provides more accurate and qualitative information for decision-making on the use of environmental protection measures, which often saves financial and material resources needed for their implementation.

Environmental risk assessment of pesticides in Ethiopia

NARCIS (Netherlands)

Teklu, B.M.

2016-01-01

The current increase in application rate and usage frequency of application of pesticides in Ethiopia pose direct risks to surface water aquatic organisms and humans and cattle using surface water as a source of drinking water in rural parts of the country. A model based risk assessment as

A comparison of radiological risk assessment models: Risk assessment models used by the BEIR V Committee, UNSCEAR, ICRP, and EPA (for NESHAP)

International Nuclear Information System (INIS)

Wahl, L.E.

1994-03-01

Radiological risk assessments and resulting risk estimates have been developed by numerous national and international organizations, including the National Research Council's fifth Committee on the Biological Effects of Ionizing Radiations (BEIR V), the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR), and the International Commission on Radiological Protection (ICRP). A fourth organization, the Environmental Protection Agency (EPA), has also performed a risk assessment as a basis for the National Emission Standards for Hazardous Air Pollutants (NESHAP). This paper compares the EPA's model of risk assessment with the models used by the BEIR V Committee, UNSCEAR, and ICRP. Comparison is made of the values chosen by each organization for several model parameters: populations used in studies and population transfer coefficients, dose-response curves and dose-rate effects, risk projection methods, and risk estimates. This comparison suggests that the EPA has based its risk assessment on outdated information and that the organization should consider adopting the method used by the BEIR V Committee, UNSCEAR, or ICRP

Information needs for risk assessment

Energy Technology Data Exchange (ETDEWEB)

DeRosa, C.T.; Choudhury, H.; Schoeny, R.S.

1990-12-31

Risk assessment can be thought of as a conceptual approach to bridge the gap between the available data and the ultimate goal of characterizing the risk or hazard associated with a particular environmental problem. To lend consistency to and to promote quality in the process, the US Environmental Protection Agency (EPA) published Guidelines for Risk Assessment of Carcinogenicity, Developmental Toxicity, Germ Cell Mutagenicity and Exposure Assessment, and Risk Assessment of Chemical Mixtures. The guidelines provide a framework for organizing the information, evaluating data, and for carrying out the risk assessment in a scientifically plausible manner. In the absence of sufficient scientific information or when abundant data are available, the guidelines provide alternative methodologies that can be employed in the risk assessment. 4 refs., 3 figs., 2 tabs.

Risk based lifetime assessment of piping under creep-fatigue conditions

International Nuclear Information System (INIS)

Bielak, O.; Bina, V.; Korous, J.

2003-01-01

The analysis of the steam pipeline lifetime is based on: (i) technical procedures supplied by Nuclear Electric R5; (ii) random interpretation of material damage accumulation laws for creep and fatigue; (iii) a stochastic model of the creep process (creep rupture strength, deformation characteristics); (iv) probabilistic description of geometrical quantities of the steam pipeline. The probabilistic procedure results in the calculation of the crack initiation risks both for the critical localities and for the steam pipeline as a whole (its subsystems, if need be). The residual lifetime was calculated from the conditional (a posteriori) probabilities. The risks of crack initiation was calculated for different operating periods (inspection frequency), and the periods were optimised to meet (i) the minimum risk of crack initiation and (2) the operation and economy criteria. The method also involves calculation of the residual lifetime from the updated data (material properties, dimensions). In the standard service-life calculations there is no difference between the weld and BM, the justification being that the weld is exposed to axial stress caused by internal pressure, which is one half of the hoop stress. Thus, the low creep resistant properties of the weld were ignored, as well as the uneven state of stress and its redistribution. In a number of cases it is the welds that are a weak point and therefore should receive considerable attention. The probabilistic method of lifetime and reliability assessment was verified on over 29 piping systems in power and petrochemical plants

Sensitivity to Uncertainty in Asteroid Impact Risk Assessment

Science.gov (United States)

Mathias, D.; Wheeler, L.; Prabhu, D. K.; Aftosmis, M.; Dotson, J.; Robertson, D. K.

2015-12-01

The Engineering Risk Assessment (ERA) team at NASA Ames Research Center is developing a physics-based impact risk model for probabilistically assessing threats from potential asteroid impacts on Earth. The model integrates probabilistic sampling of asteroid parameter ranges with physics-based analyses of entry, breakup, and impact to estimate damage areas and casualties from various impact scenarios. Assessing these threats is a highly coupled, dynamic problem involving significant uncertainties in the range of expected asteroid characteristics, how those characteristics may affect the level of damage, and the fidelity of various modeling approaches and assumptions. The presented model is used to explore the sensitivity of impact risk estimates to these uncertainties in order to gain insight into what additional data or modeling refinements are most important for producing effective, meaningful risk assessments. In the extreme cases of very small or very large impacts, the results are generally insensitive to many of the characterization and modeling assumptions. However, the nature of the sensitivity can change across moderate-sized impacts. Results will focus on the value of additional information in this critical, mid-size range, and how this additional data can support more robust mitigation decisions.

Risk-based inspection of nuclear power plants

International Nuclear Information System (INIS)

Masopust, R.

1995-01-01

A multidiscipline research programme was developed in the USA to establish risk-based inspections for NPP structures and equipment components. Based on this US research effort, the risk-based procedure for developing inspection guidelines for NPPs is described. The procedure includes the definition of systems, qualitative risk assessment, qualitative risk analysis and development of the inspection programme. The method, when adopted and modified, is recommended also for risk-based inspections of structures and equipment of WWER-type NPPs. A pilot application of the method to unit 1 of the Surry NPP is summarized. (Z.S.) 1 tab., 1 fig., 5 refs

[Study on building index system of risk assessment of post-marketing Chinese patent medicine based on AHP-fuzzy neural network].

Science.gov (United States)

Li, Yuanyuan; Xie, Yanming; Fu, Yingkun

2011-10-01

Currently massive researches have been launched about the safety, efficiency and economy of post-marketing Chinese patent medicine (CPM) proprietary Chinese medicine, but it was lack of a comprehensive interpretation. Establishing the risk evaluation index system and risk assessment model of CPM is the key to solve drug safety problems and protect people's health. The clinical risk factors of CPM exist similarities with the Western medicine, can draw lessons from foreign experience, but also have itself multi-factor multivariate multi-level complex features. Drug safety risk assessment for the uncertainty and complexity, using analytic hierarchy process (AHP) to empower the index weights, AHP-based fuzzy neural network to build post-marketing CPM risk evaluation index system and risk assessment model and constantly improving the application of traditional Chinese medicine characteristic is accord with the road and feasible beneficial exploration.

Probabilistic risk assessment as an aid to risk management

International Nuclear Information System (INIS)

Garrick, B.J.

1982-01-01

Probabilistic risk assessments are providing important insights into nuclear power plant safety. Their value is two-fold: first as a means of quantifying nuclear plant risk including contributors to risk, and second as an aid to risk management. A risk assessment provides an analytical plant model that can be the basis for performing meaningful decision analyses for controlling safety. It is the aspect of quantitative risk management that makes probabilistic risk assessment an important technical discipline of the future

Developing scenarios to assess future landslide risks: a model-based approach applied to mountainous regions

Science.gov (United States)

Vacquie, Laure; Houet, Thomas

2016-04-01

In the last century, European mountain landscapes have experienced significant transformations. Natural and anthropogenic changes, climate changes, touristic and industrial development, socio-economic interactions, and their implications in terms of LUCC (land use and land cover changes) have directly influenced the spatial organization and vulnerability of mountain landscapes. This study is conducted as part of the SAMCO project founded by the French National Science Agency (ANR). It aims at developing a methodological approach, combining various tools, modelling platforms and methods, to identify vulnerable regions to landslide hazards accounting for futures LUCC. It presents an integrated approach combining participative scenarios and a LULC changes simulation models to assess the combined effects of LUCC and climate change on landslide risks in the Cauterets valley (French Pyrenees Mountains) up to 2100. Through vulnerability and risk mapping, the objective is to gather information to support landscape planning and implement land use strategies with local stakeholders for risk management. Four contrasting scenarios are developed and exhibit contrasting trajectories of socio-economic development. Prospective scenarios are based on national and international socio-economic contexts relying on existing assessment reports. The methodological approach integrates knowledge from local stakeholders to refine each scenario during their construction and to reinforce their plausibility and relevance by accounting for local specificities, e.g. logging and pastoral activities, touristic development, urban planning, etc. A process-based model, the Forecasting Scenarios for Mountains (ForeSceM) model, developed on the Dinamica Ego modelling platform is used to spatially allocate futures LUCC for each prospective scenario. Concurrently, a spatial decision support tool, i.e. the SYLVACCESS model, is used to identify accessible areas for forestry in scenario projecting logging

ICUD-0530 Scenario based risk assessment of the dispersion of E-coli from combined sewer overflow to a fresh-water lake

DEFF Research Database (Denmark)

Rasmussen, Michael Robdrup; Thorndahl, Søren Liedtke; Nielsen, Jesper Ellerbæk

2017-01-01

A scenario based risk assessment method is used to evaluate how combined sewer overflow (CSO) affects a nearby bathing beach in Skanderborg, Denmark. The method combines an urban drainage model with a 3D CFD model to pre-simulate 60 different scenarios, used for assessing the risk of poor bathing...

A Hierarchal Risk Assessment Model Using the Evidential Reasoning Rule

Directory of Open Access Journals (Sweden)

Xiaoxiao Ji

2017-02-01

Full Text Available This paper aims to develop a hierarchical risk assessment model using the newly-developed evidential reasoning (ER rule, which constitutes a generic conjunctive probabilistic reasoning process. In this paper, we first provide a brief introduction to the basics of the ER rule and emphasize the strengths for representing and aggregating uncertain information from multiple experts and sources. Further, we discuss the key steps of developing the hierarchical risk assessment framework systematically, including (1 formulation of risk assessment hierarchy; (2 representation of both qualitative and quantitative information; (3 elicitation of attribute weights and information reliabilities; (4 aggregation of assessment information using the ER rule and (5 quantification and ranking of risks using utility-based transformation. The proposed hierarchical risk assessment framework can potentially be implemented to various complex and uncertain systems. A case study on the fire/explosion risk assessment of marine vessels demonstrates the applicability of the proposed risk assessment model.

A risk assessment model based on fuzzy logic for electricity distribution system asset management

Directory of Open Access Journals (Sweden)

Alireza Yazdani

2014-06-01

Full Text Available Electricity distribution systems are considered as the most critical sectors in countries because of the essentiality of power supplement security, socioeconomic security, and way of life. According to the central role of electricity distribution systems, risk analysis helps decision maker determine the most serious risk items to allocate the optimal amount of resources and time. Probability-impact (PI matrix is one of the most popular methods for assessment of the risks involved in the system. However, the traditional PI matrix is criticized for its inability to take into account the inherent uncertainty imposed by real-world systems. On the other hand, fuzzy sets are capable of handling the uncertainty. Thus, in this paper, fuzzy risk assessment model is developed in order to assess risk and management for electricity distribution system asset protection. Finally, a comparison analysis is conducted to show the effectiveness and the capability of the new risk assessment model.

Scenario-based earthquake hazard and risk assessment for Baku (Azerbaijan

Directory of Open Access Journals (Sweden)

G. Babayev

2010-12-01

Full Text Available A rapid growth of population, intensive civil and industrial building, land and water instabilities (e.g. landslides, significant underground water level fluctuations, and the lack of public awareness regarding seismic hazard contribute to the increase of vulnerability of Baku (the capital city of the Republic of Azerbaijan to earthquakes. In this study, we assess an earthquake risk in the city determined as a convolution of seismic hazard (in terms of the surface peak ground acceleration, PGA, vulnerability (due to building construction fragility, population features, the gross domestic product per capita, and landslide's occurrence, and exposure of infrastructure and critical facilities. The earthquake risk assessment provides useful information to identify the factors influencing the risk. A deterministic seismic hazard for Baku is analysed for four earthquake scenarios: near, far, local, and extreme events. The seismic hazard models demonstrate the level of ground shaking in the city: PGA high values are predicted in the southern coastal and north-eastern parts of the city and in some parts of the downtown. The PGA attains its maximal values for the local and extreme earthquake scenarios. We show that the quality of buildings and the probability of their damage, the distribution of urban population, exposure, and the pattern of peak ground acceleration contribute to the seismic risk, meanwhile the vulnerability factors play a more prominent role for all earthquake scenarios. Our results can allow elaborating strategic countermeasure plans for the earthquake risk mitigation in the Baku city.

Chemical Mixtures Health Risk Assessment of Environmental Contaminants: Concepts, Methods, Applications

Science.gov (United States)

This problems-based, introductory workshop focuses on methods to assess health risks posed by exposures to chemical mixtures in the environment. Chemical mixtures health risk assessment methods continue to be developed and evolve to address concerns over health risks from multic...

Risk assessment of nanomaterials and nanoproducts – adaptation of traditional approaches

International Nuclear Information System (INIS)

Jahnel, J; Fleischer, T; Seitz, S B

2013-01-01

Different approaches have been adopted for assessing the potential risks of conventional chemicals and products for human health. In general, the traditional paradigm is a toxicological-driven chemical-by-chemical approach, focusing on single toxic endpoints. Scope and responsibilities for the development and implementation of a risk assessment concept vary across sectors and areas and depends on the specific regulatory environment and the specific protection goals. Thus, risk assessment implication is a complex task based not only on science based knowledge but also on the regulatory context involving different parties and stakeholders. Questions have been raised whether standard paradigms for conventional chemicals would be applicable and adequate for new materials, products and applications of nanotechnology. Most scientists and stakeholders assume that current standard methods are in principle applicable to nanomaterials, but specific aspects require further development. The paper presents additional technical improvements like the complementary use of the life cycle methodology and the support of risk-based classification systems. But also aspects improving the utility of risk assessment with regard to societal impacts on risk governance are discussed.

A Single Conjunction Risk Assessment Metric: the F-Value

Science.gov (United States)

Frigm, Ryan Clayton; Newman, Lauri K.

2009-01-01

The Conjunction Assessment Team at NASA Goddard Space Flight Center provides conjunction risk assessment for many NASA robotic missions. These risk assessments are based on several figures of merit, such as miss distance, probability of collision, and orbit determination solution quality. However, these individual metrics do not singly capture the overall risk associated with a conjunction, making it difficult for someone without this complete understanding to take action, such as an avoidance maneuver. The goal of this analysis is to introduce a single risk index metric that can easily convey the level of risk without all of the technical details. The proposed index is called the conjunction "F-value." This paper presents the concept of the F-value and the tuning of the metric for use in routine Conjunction Assessment operations.

Assessing Risk-Based Performance Indicators in Safety-Critical Systems for Nuclear Power Plants

OpenAIRE

TONT Gabriela

2011-01-01

The paper proposes framework for a multidisciplinary nuclear risk and safety assessment by modeling uncertainty and combining diverse evidence provided in such a way that it could be used to represent an entire argument about a system's dependability. The identified safety issues are being treated by means of probabilistic safety assessment (PSA). The behavior simulation of power plant in thepresence of risk factors is analyzed from the vulnerability, risk and functional safety viewpoints, hi...

Strategic Risk Assessment

Science.gov (United States)

Derleth, Jason; Lobia, Marcus

2009-01-01

This slide presentation provides an overview of the attempt to develop and demonstrate a methodology for the comparative assessment of risks across the entire portfolio of NASA projects and assets. It includes information about strategic risk identification, normalizing strategic risks, calculation of relative risk score, and implementation options.

Overview of risk assessment