WorldWideScience

Sample records for risk assessment calculations

  1. Probabilistic risk assessment for new and existing chemicals: Example calculations

    NARCIS (Netherlands)

    Jager T; Hollander HA den; Janssen GB; Poel P van der; Rikken MGJ; Vermeire TG; ECO; CSR; LAE; CSR

    2000-01-01

    In the risk assessment methods for new and existing chemicals in the EU, "risk" is characterised by means of the deterministic quotient of exposure and effects (PEC/PNEC or Margin of Safety). From a scientific viewpoint, the uncertainty in the risk quotient should be accounted for explicitly in the

  2. Application of database management software to probabilistic risk assessment calculations

    International Nuclear Information System (INIS)

    Wyss, G.D.

    1993-01-01

    Probabilistic risk assessment (PRA) calculations require the management and processing of large amounts of information. This data normally falls into two general categories. For example, a commercial nuclear power plant PRA study makes use of plant blueprints and system schematics, formal plant safety analysis reports, incident reports, letters, memos, handwritten notes from plant visits, and even the analyst's ''engineering judgment''. This information must be documented and cross-referenced in order to properly execute and substantiate the models used in a PRA study. The first category is composed of raw data that is accumulated from equipment testing and operational experiences. These data describe the equipment, its service or testing conditions, its failure mode, and its performance history. The second category is composed of statistical distributions. These distributions can represent probabilities, frequencies, or values of important parameters that are not time-related. Probability and frequency distributions are often obtained by fitting raw data to an appropriate statistical distribution. Database management software is used to store both types of data so that it can be readily queried, manipulated, and archived. This paper provides an overview of the information models used for storing PRA data and illustrates the implementation of these models using examples from current PRA software packages

  3. HOW TO CALCULATE INFORMATION VALUE FOR EFFECTIVE SECURITY RISK ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Mario Sajko

    2006-12-01

    Full Text Available The actual problem of information security (infosec risk assessment is determining the value of information property or asset. This is particularly manifested through the use of quantitative methodology in which it is necessary to state the information value in quantitative sizes. The aim of this paper is to describe the evaluation possibilities of business information values, and the criteria needed for determining importance of information. For this purpose, the dimensions of information values will be determined and the ways used to present the importance of information contents will be studied. There are two basic approaches that can be used in evaluation: qualitative and quantitative. Often they are combined to determine forms of information content. The proposed criterion is the three-dimension model, which combines the existing experiences (i.e. possible solutions for information value assessment with our own criteria. An attempt for structuring information value in a business environment will be made as well.

  4. Calculated risks

    International Nuclear Information System (INIS)

    Rodricks, J.V.

    1992-01-01

    This book is a clear, practical, and balanced view of toxicology and risk management. The introduction argues the case for risks assessment and outlines the benefits and problems associated with chemical exposure. The first part of the book covers the basic science and the sources of human exposure to chemicals. Absorption, distribution, metabolism, and excretion are covered in some detail. The subsequent chapter gives a lively discussion of toxicity studies and then describes slow and fast poisons. The author gives the arguments for as well as against animal testing. There is much public bewilderment caused by reports of cancer-causing pesticides in apple juice and poisons emanating from nearby hazardous waste sites. The author believes that too much has been written in an attempt to expose governmental and corporate ignorance, negligence, and corruption. This book is less of a polemic, and more of a clear, unbiased clarification of the scientific basis for our concerns and uncertainties. It should serve to refocus the debate

  5. Personalized risk communication for personalized risk assessment: Real world assessment of knowledge and motivation for six mortality risk measures from an online life expectancy calculator.

    Science.gov (United States)

    Manuel, Douglas G; Abdulaziz, Kasim E; Perez, Richard; Beach, Sarah; Bennett, Carol

    2018-01-01

    In the clinical setting, previous studies have shown personalized risk assessment and communication improves risk perception and motivation. We evaluated an online health calculator that estimated and presented six different measures of life expectancy/mortality based on a person's sociodemographic and health behavior profile. Immediately after receiving calculator results, participants were invited to complete an online survey that asked how informative and motivating they found each risk measure, whether they would share their results and whether the calculator provided information they need to make lifestyle changes. Over 80% of the 317 survey respondents found at least one of six healthy living measures highly informative and motivating, but there was moderate heterogeneity regarding which measures respondents found most informative and motivating. Overall, health age was most informative and life expectancy most motivating. Approximately 40% of respondents would share the results with their clinician (44%) or social networks (38%), although the information they would share was often different from what they found informative or motivational. Online personalized risk assessment allows for a more personalized communication compared to historic paper-based risk assessment to maximize knowledge and motivation, and people should be provided a range of risk communication measures that reflect different risk perspectives.

  6. RESRAD for Radiological Risk Assessment. Comparison with EPA CERCLA Tools - PRG and DCC Calculators

    Energy Technology Data Exchange (ETDEWEB)

    Yu, C. [Argonne National Lab. (ANL), Argonne, IL (United States); Cheng, J. -J. [Argonne National Lab. (ANL), Argonne, IL (United States); Kamboj, S. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-07-01

    The purpose of this report is two-fold. First, the risk assessment methodology for both RESRAD and the EPA’s tools is reviewed. This includes a review of the EPA’s justification for 2 using a dose-to-risk conversion factor to reduce the dose-based protective ARAR from 15 to 12 mrem/yr. Second, the models and parameters used in RESRAD and the EPA PRG and DCC Calculators are compared in detail, and the results are summarized and discussed. Although there are suites of software tools in the RESRAD family of codes and the EPA Calculators, the scope of this report is limited to the RESRAD (onsite) code for soil contamination and the EPA’s PRG and DCC Calculators also for soil contamination.

  7. Usage of Geoprocessing Services in Precision Forestry for Wood Volume Calculation and Wind Risk Assessment

    Directory of Open Access Journals (Sweden)

    Tomáš Mikita

    2015-01-01

    Full Text Available This paper outlines the idea of a precision forestry tool for optimizing clearcut size and shape within the process of forest recovery and its publishing in the form of a web processing service for forest owners on the Internet. The designed tool titled COWRAS (Clearcut Optimization and Wind Risk Assessment is developed for optimization of clearcuts (their location, shape, size, and orientation with subsequent wind risk assessment. The tool primarily works with airborne LiDAR data previously processed to the form of a digital surface model (DSM and a digital elevation model (DEM. In the first step, the growing stock on the planned clearcut determined by its location and area in feature class is calculated (by the method of individual tree detection. Subsequently tree heights from canopy height model (CHM are extracted and then diameters at breast height (DBH and wood volume using the regressions are calculated. Information about wood volume of each tree in the clearcut is exported and summarized in a table. In the next step, all trees in the clearcut are removed and a new DSM without trees in the clearcut is generated. This canopy model subsequently serves as an input for evaluation of wind risk damage by the MAXTOPEX tool (Mikita et al., 2012. In the final raster, predisposition of uncovered forest stand edges (around the clearcut to wind risk is calculated based on this analysis. The entire tool works in the background of ArcGIS server as a spatial decision support system for foresters.

  8. STRRAP system-A software for hazardous materials risk assessment and safe distances calculation

    International Nuclear Information System (INIS)

    Godoy, S.M.; Santa Cruz, A.S.M.; Scenna, N.J.

    2007-01-01

    This work presents a powerful computational tool (Stochastic Toxic Release Risk Assessment Package, STRRAP) useful in risk assessment and emergency planning (safe distance calculation), which allows to handle the stochastic uncertainty of atmospheric parameters, critical for risk calculation when diffusion of hazardous gases or particulate matter occur as a consequence of an emission or accidental release. In fact, the random behaviour of wind intensity, wind direction, atmospheric stability and temperature, given a time horizon, (a season or a complete year), is taken into account considering also the day or night condition. STRRAP can be used for releases or emissions from static sources (for example a stack or a fixed tank in a facility) or from transportation accidents (road, rail, maritime and pipeline transport) involving different scenarios. After a stochastic simulation based on well-known diffusion models (dense and light gases, particulate matter) is carried out, the downwind pollutant concentrations are obtained, in order to compute safe distances and/or individual and societal risks. Some study cases are analyzed to show STRRAP capabilities

  9. Radiation therapy for stage IIA and IIB testicular seminoma: peripheral dose calculations and risk assessments

    Science.gov (United States)

    Mazonakis, Michalis; Berris, Theocharris; Lyraraki, Efrossyni; Damilakis, John

    2015-03-01

    This study was conducted to calculate the peripheral dose to critical structures and assess the radiation risks from modern radiotherapy for stage IIA/IIB testicular seminoma. A Monte Carlo code was used for treatment simulation on a computational phantom representing an average adult. The initial treatment phase involved anteroposterior and posteroanaterior modified dog-leg fields exposing para-aortic and ipsilateral iliac lymph nodes followed by a cone-down phase for nodal mass irradiation. Peripheral doses were calculated using different modified dog-leg field dimensions and an extended conventional dog-leg portal. The risk models of the BEIR-VII report and ICRP-103 were combined with dosimetric calculations to estimate the probability of developing stochastic effects. Radiotherapy for stage IIA seminoma with a target dose of 30 Gy resulted in a range of 23.0-603.7 mGy to non-targeted peripheral tissues and organs. The corresponding range for treatment of stage IIB disease to a cumulative dose of 36 Gy was 24.2-633.9 mGy. A dose variation of less than 13% was found by altering the field dimensions. Radiotherapy with the conventional instead of the modern modified dog-leg field increased the peripheral dose up to 8.2 times. The calculated heart doses of 589.0-632.9 mGy may increase the risk for developing cardiovascular diseases whereas the testicular dose of more than 231.9 mGy may lead to a temporary infertility. The probability of birth abnormalities in the offspring of cancer survivors was below 0.13% which is much lower than the spontaneous mutation rate. Abdominoplevic irradiation may increase the lifetime intrinsic risk for the induction of secondary malignancies by 0.6-3.9% depending upon the site of interest, patient’s age and tumor dose. Radiotherapy for stage IIA/IIB seminoma with restricted fields and low doses is associated with an increased morbidity. These data may allow the definition of a risk-adapted follow-up scheme for long

  10. Cardiovascular risk calculation

    African Journals Online (AJOL)

    James A. Ker

    2014-08-20

    Aug 20, 2014 ... smoking and elevated blood sugar levels (diabetes mellitus). These risk ... These are risk charts, e.g. FRS, a non-laboratory-based risk calculation, and ... for hard cardiovascular end-points, such as coronary death, myocardial ...

  11. Arsenic: bioaccessibility from seaweed and rice, dietary exposure calculations and risk assessment.

    Science.gov (United States)

    Brandon, Esther F A; Janssen, Paul J C M; de Wit-Bos, Lianne

    2014-01-01

    Arsenic is a metalloid that occurs in food and the environment in different chemical forms. Inorganic arsenic is classified as a class I carcinogen. The inorganic arsenic intake from food and drinking water varies depending on the geographic arsenic background. Non-dietary exposure to arsenic is likely to be of minor importance for the general population within the European Union. In Europe, arsenic in drinking water is on average low, but food products (e.g. rice and seaweed) are imported from all over the world including from regions with naturally high arsenic levels. Therefore, specific populations living in Europe could also have a high exposure to inorganic arsenic due to their consumption pattern. Current risk assessment is based on exposure via drinking water. For a good estimation of the risks of arsenic in food, it is important to investigate if the bioavailability of inorganic arsenic from food is different from drinking water. The present study further explores the issue of European dietary exposure to inorganic arsenic via rice and seaweed and its associated health risks. The bioavailability of inorganic arsenic was measured in in vitro digestion experiments. The data indicate that the bioavailability of inorganic arsenic is similar for rice and seaweed compared with drinking water. The calculated dietary intake for specific European Union populations varied between 0.44 and 4.51 µg kg⁻¹ bw day⁻¹. The margins of exposure between the inorganic intake levels and the BMDL0.5 values as derived by JECFA are low. Decreasing the intake of inorganic arsenic via Hijiki seaweed could be achieved by setting legal limits similar to those set for rice by the Codex Alimentarius Commission in July 2014.

  12. Comparing Methods of Calculating Expected Annual Damage in Urban Pluvial Flood Risk Assessments

    DEFF Research Database (Denmark)

    Skovgård Olsen, Anders; Zhou, Qianqian; Linde, Jens Jørgen

    2015-01-01

    Estimating the expected annual damage (EAD) due to flooding in an urban area is of great interest for urban water managers and other stakeholders. It is a strong indicator for a given area showing how vulnerable it is to flood risk and how much can be gained by implementing e.g., climate change...... adaptation measures. This study identifies and compares three different methods for estimating the EAD based on unit costs of flooding of urban assets. One of these methods was used in previous studies and calculates the EAD based on a few extreme events by assuming a log-linear relationship between cost...... of an event and the corresponding return period. This method is compared to methods that are either more complicated or require more calculations. The choice of method by which the EAD is calculated appears to be of minor importance. At all three case study areas it seems more important that there is a shift...

  13. Comparing Methods of Calculating Expected Annual Damage in Urban Pluvial Flood Risk Assessments

    Directory of Open Access Journals (Sweden)

    Anders Skovgård Olsen

    2015-01-01

    Full Text Available Estimating the expected annual damage (EAD due to flooding in an urban area is of great interest for urban water managers and other stakeholders. It is a strong indicator for a given area showing how vulnerable it is to flood risk and how much can be gained by implementing e.g., climate change adaptation measures. This study identifies and compares three different methods for estimating the EAD based on unit costs of flooding of urban assets. One of these methods was used in previous studies and calculates the EAD based on a few extreme events by assuming a log-linear relationship between cost of an event and the corresponding return period. This method is compared to methods that are either more complicated or require more calculations. The choice of method by which the EAD is calculated appears to be of minor importance. At all three case study areas it seems more important that there is a shift in the damage costs as a function of the return period. The shift occurs approximately at the 10 year return period and can perhaps be related to the design criteria for sewer systems. Further, it was tested if the EAD estimation could be simplified by assuming a single unit cost per flooded area. The results indicate that within each catchment this may be a feasible approach. However the unit costs varies substantially between different case study areas. Hence it is not feasible to develop unit costs that can be used to calculate EAD, most likely because the urban landscape is too heterogeneous.

  14. Neutronics calculations for denatured molten salt reactors: Assessing resource requirements and proliferation-risk attributes

    International Nuclear Information System (INIS)

    Ahmad, Ali; McClamrock, Edward B.; Glaser, Alexander

    2015-01-01

    Highlights: • We study the proliferation-risk and resource attributes of denatured MSRs. • MSRs offer significantly better resource efficiency compared to light-water reactors. • Denatured single-fluid MSRs reactors offer promising non-proliferation attributes. - Abstract: Molten salt reactors (MSRs) are often advocated as a radical but worthwhile alternative to traditional reactor concepts based on solid fuels. This article builds upon the existing research into MSRs to model and simulate the operation of thorium-fueled single-fluid and two-fluid reactors. The analysis is based on neutronics calculations and focuses on denatured MSR systems. Resource utilization and basic proliferation-risk attributes are compared to those of standard light-water reactors. Depending on specific design choices, even fully denatured reactors could reduce uranium and enrichment requirements by a factor of 3–4. Overall, denatured single-fluid designs appear as the most promising candidate technology minimizing both design complexity and overall proliferation risks despite being somewhat less attractive from the perspective of resource utilization

  15. Bayesian Algorithm Implementation in a Real Time Exposure Assessment Model on Benzene with Calculation of Associated Cancer Risks

    Directory of Open Access Journals (Sweden)

    Pavlos A. Kassomenos

    2009-02-01

    Full Text Available The objective of the current study was the development of a reliable modeling platform to calculate in real time the personal exposure and the associated health risk for filling station employees evaluating current environmental parameters (traffic, meteorological and amount of fuel traded determined by the appropriate sensor network. A set of Artificial Neural Networks (ANNs was developed to predict benzene exposure pattern for the filling station employees. Furthermore, a Physiology Based Pharmaco-Kinetic (PBPK risk assessment model was developed in order to calculate the lifetime probability distribution of leukemia to the employees, fed by data obtained by the ANN model. Bayesian algorithm was involved in crucial points of both model sub compartments. The application was evaluated in two filling stations (one urban and one rural. Among several algorithms available for the development of the ANN exposure model, Bayesian regularization provided the best results and seemed to be a promising technique for prediction of the exposure pattern of that occupational population group. On assessing the estimated leukemia risk under the scope of providing a distribution curve based on the exposure levels and the different susceptibility of the population, the Bayesian algorithm was a prerequisite of the Monte Carlo approach, which is integrated in the PBPK-based risk model. In conclusion, the modeling system described herein is capable of exploiting the information collected by the environmental sensors in order to estimate in real time the personal exposure and the resulting health risk for employees of gasoline filling stations.

  16. Bayesian algorithm implementation in a real time exposure assessment model on benzene with calculation of associated cancer risks.

    Science.gov (United States)

    Sarigiannis, Dimosthenis A; Karakitsios, Spyros P; Gotti, Alberto; Papaloukas, Costas L; Kassomenos, Pavlos A; Pilidis, Georgios A

    2009-01-01

    The objective of the current study was the development of a reliable modeling platform to calculate in real time the personal exposure and the associated health risk for filling station employees evaluating current environmental parameters (traffic, meteorological and amount of fuel traded) determined by the appropriate sensor network. A set of Artificial Neural Networks (ANNs) was developed to predict benzene exposure pattern for the filling station employees. Furthermore, a Physiology Based Pharmaco-Kinetic (PBPK) risk assessment model was developed in order to calculate the lifetime probability distribution of leukemia to the employees, fed by data obtained by the ANN model. Bayesian algorithm was involved in crucial points of both model sub compartments. The application was evaluated in two filling stations (one urban and one rural). Among several algorithms available for the development of the ANN exposure model, Bayesian regularization provided the best results and seemed to be a promising technique for prediction of the exposure pattern of that occupational population group. On assessing the estimated leukemia risk under the scope of providing a distribution curve based on the exposure levels and the different susceptibility of the population, the Bayesian algorithm was a prerequisite of the Monte Carlo approach, which is integrated in the PBPK-based risk model. In conclusion, the modeling system described herein is capable of exploiting the information collected by the environmental sensors in order to estimate in real time the personal exposure and the resulting health risk for employees of gasoline filling stations.

  17. Performance assessment calculational exercises

    International Nuclear Information System (INIS)

    Barnard, R.W.; Dockery, H.A.

    1990-01-01

    The Performance Assessment Calculational Exercises (PACE) are an ongoing effort coordinated by Yucca Mountain Project Office. The objectives of fiscal year 1990 work, termed PACE-90, as outlined in the Department of Energy Performance Assessment (PA) Implementation Plan were to develop PA capabilities among Yucca Mountain Project (YMP) participants by calculating performance of a Yucca Mountain (YM) repository under ''expected'' and also ''disturbed'' conditions, to identify critical elements and processes necessary to assess the performance of YM, and to perform sensitivity studies on key parameters. It was expected that the PACE problems would aid in development of conceptual models and eventual evaluation of site data. The PACE-90 participants calculated transport of a selected set of radionuclides through a portion of Yucca Mountain for a period of 100,000 years. Results include analyses of fluid-flow profiles, development of a source term for radionuclide release, and simulations of contaminant transport in the fluid-flow field. Later work included development of a problem definition for perturbations to the originally modeled conditions and for some parametric sensitivity studies. 3 refs

  18. The CPC Risk Calculator

    DEFF Research Database (Denmark)

    Røder, Martin Andreas; Berg, Kasper Drimer; Loft, Mathias Dyrberg

    2018-01-01

    BACKGROUND: It can be challenging to predict the risk of biochemical recurrence (BR) during follow-up after radical prostatectomy (RP) in men who have undetectable prostate-specific antigen (PSA), even years after surgery. OBJECTIVE: To establish and validate a contemporary nomogram that predicts...... on the necessity for further follow-up. The nomogram is the first to be available as a free app. PATIENT SUMMARY: We developed an easily interpretable nomogram to evaluate the risk of prostate-specific antigen elevation (cancer recurrence) following complete removal of the prostate (radical prostatectomy...... included. OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS: Time to BR was defined as the first PSA result ≥0.2 ng/ml. BR risk was computed using multiple cause-specific Cox regression including preoperative PSA, pT category, RP Gleason score (GS), and surgical margin (R) status. Death without BR...

  19. Mice take calculated risks.

    Science.gov (United States)

    Kheifets, Aaron; Gallistel, C R

    2012-05-29

    Animals successfully navigate the world despite having only incomplete information about behaviorally important contingencies. It is an open question to what degree this behavior is driven by estimates of stochastic parameters (brain-constructed models of the experienced world) and to what degree it is directed by reinforcement-driven processes that optimize behavior in the limit without estimating stochastic parameters (model-free adaptation processes, such as associative learning). We find that mice adjust their behavior in response to a change in probability more quickly and abruptly than can be explained by differential reinforcement. Our results imply that mice represent probabilities and perform calculations over them to optimize their behavior, even when the optimization produces negligible material gain.

  20. Risk Assessment

    Science.gov (United States)

    How the EPA conducts risk assessment to protect human health and the environment. Several assessments are included with the guidelines, models, databases, state-based RSL Tables, local contacts and framework documents used to perform these assessments.

  1. Calculating Risk: Radiation and Chernobyl.

    Science.gov (United States)

    Gale, Robert Peter

    1987-01-01

    Considers who is at risk in a disaster such as Chernobyl. Assesses the difficulty in translating information regarding radiation to the public and in determining the acceptability of technological risks. (NKA)

  2. Health Risk Assessment for Uranium in Groundwater - An Integrated Case Study Based on Hydrogeological Characterization and Dose Calculation

    Science.gov (United States)

    Franklin, M. R.; Veiga, L. H.; Py, D. A., Jr.; Fernandes, H. M.

    2010-12-01

    The uranium mining and milling facilities of Caetité (URA) is the only active uranium production center in Brazil. Operations take place at a very sensitive semi-arid region in the country where water resources are very scarce. Therefore, any contamination of the existing water bodies may trigger critical consequences to local communities because their sustainability is closely related to the availability of the groundwater resources. Due to the existence of several uranium anomalies in the region, groundwater can present radionuclide concentrations above the world average. The radiological risk associated to the ingestion of these waters have been questioned by members of the local communities, NGO’s and even regulatory bodies that suspected that the observed levels of radionuclide concentrations (specially Unat) could be related to the uranium mining and milling operations. Regardless the origin of these concentrations the fear that undesired health effects were taking place (e.g. increase in cancer incidence) remain despite the fact that no evidence - based on epidemiological studies - is available. This paper intends to present the connections between the local hydrogeology and the radiological characterization of groundwater in the neighboring areas of the uranium production center to understand the implications to the human health risk due to the ingestion of groundwater. The risk assessment was performed, taking into account the radiological and the toxicological risks. Samples from 12 wells have been collected and determinations of Unat, Thnat, 226Ra, 228Ra and 210Pb were performed. The radiation-related risks were estimated for adults and children by the calculation of the annual effective doses. The potential non-carcinogenic effects due to the ingestion of uranium were evaluated by the estimation of the hazard index (HI). Monte Carlo simulations were used to calculate the uncertainty associated with these estimates, i.e. the 95% confidence interval

  3. Risk assessment

    International Nuclear Information System (INIS)

    Kinchin, G.H.

    1983-01-01

    After defining risk and introducing the concept of individual and societal risk, the author considers each of these, restricting considerations to risk of death. Some probabilities of death arising from various causes are quoted, and attention drawn to the care necessary in making comparisons between sets of data and to the distinction between voluntary and involuntary categories and between early and delayed deaths. The presentation of information on societal risk is discussed and examples given. The history of quantified risk assessment is outlined, particularly related to the nuclear industry, the process of assessing risk discussed: identification of hazard causes, the development of accident chains and the use of event trees, the evaluation of probability through the collection of data and their use with fault trees, and the assessment of consequences of hazards in terms of fatalities. Reference is made to the human element and common-made failures, and to studies supporting the development of reliability assessment techniques. Acceptance criteria are discussed for individual and societal risk in the nuclear field, and it is shown that proposed criteria lead to risks conservative by comparison with risks from day-to-day accidents and other potentially hazardous industries. (U.K.)

  4. Strategic Risk Assessment

    Science.gov (United States)

    Derleth, Jason; Lobia, Marcus

    2009-01-01

    This slide presentation provides an overview of the attempt to develop and demonstrate a methodology for the comparative assessment of risks across the entire portfolio of NASA projects and assets. It includes information about strategic risk identification, normalizing strategic risks, calculation of relative risk score, and implementation options.

  5. Risk Assessment

    OpenAIRE

    Hrdová, Edita

    2012-01-01

    This diploma thesis is focused on companies risk evaluation before endorsement of Loan deriving from business relationships. The aim of this thesis is not only to describe individual steps of risk assessment, but also perfom analysis of particular companies based on available data, i.e. Balance sheet, Profit and Loss statement and external rating and after that propose solution for each company. My analysis will be based on theoretical knowledge, further on experience related to my job role a...

  6. Risk assessment

    DEFF Research Database (Denmark)

    Pedersen, Liselotte; Rasmussen, Kirsten; Elsass, Peter

    2010-01-01

    International research suggests that using formalized risk assessment methods may improve the predictive validity of professionals' predictions of risk of future violence. This study presents data on forensic psychiatric patients discharged from a forensic unit in Denmark in year 2001-2002 (n=107...... and the individual dynamic items strengthen the use of this scheme in clinical practice. (PsycINFO Database Record (c) 2010 APA, all rights reserved) (journal abstract)...

  7. Bayesian Algorithm Implementation in a Real Time Exposure Assessment Model on Benzene with Calculation of Associated Cancer Risks

    OpenAIRE

    Sarigiannis, Dimosthenis A.; Karakitsios, Spyros P.; Gotti, Alberto; Papaloukas, Costas L.; Kassomenos, Pavlos A.; Pilidis, Georgios A.

    2009-01-01

    The objective of the current study was the development of a reliable modeling platform to calculate in real time the personal exposure and the associated health risk for filling station employees evaluating current environmental parameters (traffic, meteorological and amount of fuel traded) determined by the appropriate sensor network. A set of Artificial Neural Networks (ANNs) was developed to predict benzene exposure pattern for the filling station employees. Furthermore, a Physiology Based...

  8. Assessment of cardiovascular risk.

    LENUS (Irish Health Repository)

    Cooney, Marie Therese

    2010-10-01

    Atherosclerotic cardiovascular disease (CVD) is the most common cause of death worldwide. Usually atherosclerosis is caused by the combined effects of multiple risk factors. For this reason, most guidelines on the prevention of CVD stress the assessment of total CVD risk. The most intensive risk factor modification can then be directed towards the individuals who will derive the greatest benefit. To assist the clinician in calculating the effects of these multiple interacting risk factors, a number of risk estimation systems have been developed. This review address several issues regarding total CVD risk assessment: Why should total CVD risk be assessed? What risk estimation systems are available? How well do these systems estimate risk? What are the advantages and disadvantages of the current systems? What are the current limitations of risk estimation systems and how can they be resolved? What new developments have occurred in CVD risk estimation?

  9. Risk assessment calculations using MEPAS, an accepted screening methodology, and an uncertainty analysis for the reranking of Waste Area Groupings at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    Shevenell, L.; Hoffman, F.O.; MacIntosh, D.

    1992-03-01

    The Waste Area Groupings (WAGs) at the Oak Ridge National Laboratory (ORNL) were reranked with respect to on- and off-site human health risks using two different methods. Risks associated with selected contaminants from each WAG for occupants of WAG 2 or an off-site area were calculated using a modified formulation of the Multimedia Environmental Pollutant Assessment System (MEPAS) and a method suitable for screening, referred to as the ORNL/ESD method (the method developed by the Environmental Sciences Division at ORNL) in this report. Each method resulted in a different ranking of the WAGs. The rankings from the two methods are compared in this report. All risk assessment calculations, except the original MEPAS calculations, indicated that WAGs 1; 2, 6, 7 (WAGs 2, 6 and 7 as one combined WAG); and 4 pose the greatest potential threat to human health. However, the overall rankings of the WAGs using constant parameter values in the different methods were inconclusive because uncertainty in parameter values can change the calculated risk associated with particular pathways, and hence, the final rankings. Uncertainty analysis using uncertainties about all model parameters were used to reduce biases associated with parameter selection and to more reliably rank waste sites according to potential risks associated with site contaminants. Uncertainty analysis indicates that the WAGs should be considered for further investigation, or remediation, in the following order: (1) WAG 1; (2) WAGs 2, 6, and 7 (combined); and 4; (3) WAGs 3, 5, and 9; and, (4) WAG 8

  10. Development and pilot feasibility study of a health information technology tool to calculate mortality risk for patients with asymptomatic carotid stenosis: the Carotid Risk Assessment Tool (CARAT)

    OpenAIRE

    Faerber, Adrienne E; Horvath, Rebecca; Stillman, Carey; O?Connell, Melissa L; Hamilton, Amy L; Newhall, Karina A; Likosky, Donald S; Goodney, Philip P

    2015-01-01

    Background Patients with no history of stroke but with stenosis of the carotid arteries can reduce the risk of future stroke with surgery or stenting. At present, a physicians? ability to recommend optimal treatments based on an individual?s risk profile requires estimating the likelihood that a patient will have a poor peri-operative outcomes and the likelihood that the patient will survive long enough to gain benefit from the procedure. We describe the development of the CArotid Risk Assess...

  11. Risk assessment

    International Nuclear Information System (INIS)

    1983-01-01

    The report is in sections, entitled: preface; summary and conclusions; introduction (historical and organizational); estimating engineering risks (techniques of risk estimation and forms of expression of risk); laboratory experiments for estimation of biological risks; estimation of risk from observations on man (travel, medical procedures; occupations; sport); the perception of risks; (as an example of attitudes towards a single hazard, studies of nuclear power are considered among other topics in this section); risk management (estimation; perception; acceptability, analysis of risk, costs and benefits; safety standards; decision-making process; possible guidelines). (U.K.)

  12. Calculating excess lifetime risk in relative risk models

    International Nuclear Information System (INIS)

    Vaeth, M.; Pierce, D.A.

    1990-01-01

    When assessing the impact of radiation exposure it is common practice to present the final conclusions in terms of excess lifetime cancer risk in a population exposed to a given dose. The present investigation is mainly a methodological study focusing on some of the major issues and uncertainties involved in calculating such excess lifetime risks and related risk projection methods. The age-constant relative risk model used in the recent analyses of the cancer mortality that was observed in the follow-up of the cohort of A-bomb survivors in Hiroshima and Nagasaki is used to describe the effect of the exposure on the cancer mortality. In this type of model the excess relative risk is constant in age-at-risk, but depends on the age-at-exposure. Calculation of excess lifetime risks usually requires rather complicated life-table computations. In this paper we propose a simple approximation to the excess lifetime risk; the validity of the approximation for low levels of exposure is justified empirically as well as theoretically. This approximation provides important guidance in understanding the influence of the various factors involved in risk projections. Among the further topics considered are the influence of a latent period, the additional problems involved in calculations of site-specific excess lifetime cancer risks, the consequences of a leveling off or a plateau in the excess relative risk, and the uncertainties involved in transferring results from one population to another. The main part of this study relates to the situation with a single, instantaneous exposure, but a brief discussion is also given of the problem with a continuous exposure at a low-dose rate

  13. State of risk assessment

    International Nuclear Information System (INIS)

    Conrad, J.

    1978-03-01

    In view of the growing importance assumed in recent years by scientific work on the calculation, quantification, evaluation and acceptance as well as behavior in the face of risks in general and more specifically, the risks of large industrial plants, the report attempts to provide a survey of the current situation, results and evaluation of this new branch of research, risk assessment. The emphasis of the report is on the basic discussion and criticism of the theoretical and methodological approaches used in the field of risk assessment (section 3). It is concerned above all with - methodical problems of determining and quantifying risks (3.1) - questions of the possibility of risk evaluation and comp arison (3.1, 3.2) - the premises of normative and empirical studies on decision making under risk (3.2, 3.3) - investigations into society's acceptance of risks involved in the introduction of new technologies (3.4) - attempts to combine various aspects of the field of risk assessment in a unified concept (3.5, 3.6, 3.7). Because risk assessment is embedded in the framework of decision theory and technology assessment, it can be implicitly evaluated at a more general level within this framework, as far as its possibilities and weaknesses of method and application are concerned (section 4). Sections 2 and 5 deal with the social context of origin and utilization of risk assessment. Finally, an attempt is made at a summary indicating the possible future development of risk assessment. (orig./HP) [de

  14. Hydrogen risk and associated calculations

    International Nuclear Information System (INIS)

    Forestier, A.; Lecomte, M.; Studer, M.

    1993-01-01

    Hydrogen risk is one aspect that can't be neglected by nuclear safety. On the other side, experimental data are very difficult to simulate the real conditions of an accident. So the numerical way can be an aid to the comprehension and the modelling of the risk. PLEXUS code, with its previous developments seems a good candidate to simulate this problem

  15. 17 CFR 240.17i-7 - Calculations of allowable capital and risk allowances or alternative capital assessment.

    Science.gov (United States)

    2010-04-01

    ...) Allowance for market risk. The supervised investment bank holding company must compute an allowance for market risk on a consolidated basis for all proprietary positions, including debt instruments, equity instruments, commodity instruments, foreign exchange contracts, and derivative contracts as the aggregate of...

  16. Insecticide contamination of the River Meuse in August 2007. Risk Assessment on the basis of MAM calculations

    NARCIS (Netherlands)

    Penailillo, B.R.; Morales, Y.; Meijers, E.

    2008-01-01

    On 31 July the company Chimac-Agriphar from Ougrée discharged 64 kilo chlorpyrifos and 12 kilo cypermethrin into the River Meuse, imposing risks to recreation (swimming and fishing), ecology (about 20 to 25 ton fish were killed) and drinking water production. In this study a retrospective risk

  17. Introduction to risk assessment

    International Nuclear Information System (INIS)

    Raina, V.M.

    2002-01-01

    This paper gives an introduction to risk assessment. It discusses the basic concepts of risk assessment, nuclear risk assessment process and products, the role of risk assessment products in nuclear safety assurance, the relationship between risk assessment and other safety analysis and risk assessment and safe operating envelope

  18. GAR Global Risk Assessment

    Science.gov (United States)

    Maskrey, Andrew; Safaie, Sahar

    2015-04-01

    Disaster risk management strategies, policies and actions need to be based on evidence of current disaster loss and risk patterns, past trends and future projections, and underlying risk factors. Faced with competing demands for resources, at any level it is only possible to priorities a range of disaster risk management strategies and investments with adequate understanding of realised losses, current and future risk levels and impacts on economic growth and social wellbeing as well as cost and impact of the strategy. The mapping and understanding of the global risk landscape has been greatly enhanced by the latest iteration of the GAR Global Risk Assessment and the objective of this submission is to present the GAR global risk assessment which contributed to Global Assessment Report (GAR) 2015. This initiative which has been led by UNISDR, was conducted by a consortium of technical institutions from around the world and has covered earthquake, cyclone, riverine flood, and tsunami probabilistic risk for all countries of the world. In addition, the risks associated with volcanic ash in the Asia-Pacific region, drought in various countries in sub-Saharan Africa and climate change in a number of countries have been calculated. The presentation will share thee results as well as the experience including the challenges faced in technical elements as well as the process and recommendations for the future of such endeavour.

  19. Challenges in Risk Assessment: Quantitative Risk Assessment

    OpenAIRE

    Jacxsens, Liesbeth; Uyttendaele, Mieke; De Meulenaer, Bruno

    2016-01-01

    The process of risk analysis consists out of three components, risk assessment, risk management and risk communication. These components are internationally well spread by Codex Alimentarius Commission as being the basis for setting science based standards, criteria on food safety hazards, e.g. setting maximum limits of mycotoxins in foodstuffs. However, the technical component risk assessment is hard to elaborate and to understand. Key in a risk assessment is the translation of biological or...

  20. Making sense of cancer risk calculators on the web.

    Science.gov (United States)

    Levy, Andrea Gurmankin; Sonnad, Seema S; Kurichi, Jibby E; Sherman, Melani; Armstrong, Katrina

    2008-03-01

    Cancer risk calculators on the internet have the potential to provide users with valuable information about their individual cancer risk. However, the lack of oversight of these sites raises concerns about low quality and inconsistent information. These concerns led us to evaluate internet cancer risk calculators. After a systematic search to find all cancer risk calculators on the internet, we reviewed the content of each site for information that users should seek to evaluate the quality of a website. We then examined the consistency of the breast cancer risk calculators by having 27 women complete 10 of the breast cancer risk calculators for themselves. We also completed the breast cancer risk calculators for a hypothetical high- and low-risk woman, and compared the output to Surveillance Epidemiology and End Results estimates for the average same-age and same-race woman. Nineteen sites were found, 13 of which calculate breast cancer risk. Most sites do not provide the information users need to evaluate the legitimacy of a website. The breast cancer calculator sites vary in the risk factors they assess to calculate breast cancer risk, how they operationalize each risk factor and in the risk estimate they provide for the same individual. Internet cancer risk calculators have the potential to provide a public health benefit by educating individuals about their risks and potentially encouraging preventive health behaviors. However, our evaluation of internet calculators revealed several problems that call into question the accuracy of the information that they provide. This may lead the users of these sites to make inappropriate medical decisions on the basis of misinformation.

  1. The new pooled cohort equations risk calculator

    DEFF Research Database (Denmark)

    Preiss, David; Kristensen, Søren L

    2015-01-01

    disease and any measure of social deprivation. An early criticism of the Pooled Cohort Equations Risk Calculator has been its alleged overestimation of ASCVD risk which, if confirmed in the general population, is likely to result in statin therapy being prescribed to many individuals at lower risk than...

  2. Calculational Tool for Skin Contamination Dose Assessment

    CERN Document Server

    Hill, R L

    2002-01-01

    Spreadsheet calculational tool was developed to automate the calculations preformed for dose assessment of skin contamination. This document reports on the design and testing of the spreadsheet calculational tool.

  3. CALCULATING ECONOMIC RISK AFTER HANFORD CLEANUP

    International Nuclear Information System (INIS)

    Scott, Michael J.

    2003-01-01

    Since late 1997, researchers at the Hanford Site have been engaged in the Groundwater Protection Project (formerly, the Groundwater/Vadose Zone Project), developing a suite of integrated physical and environmental models and supporting data to trace the complex path of Hanford legacy contaminants through the environment for the next thousand years, and to estimate corresponding environmental, human health, economic, and cultural risks. The linked set of models and data is called the System Assessment Capability (SAC). The risk mechanism for economics consists of ''impact triggers'' (sequences of physical and human behavior changes in response to, or resulting from, human health or ecological risks), and processes by which particular trigger mechanisms induce impacts. Economic impacts stimulated by the trigger mechanisms may take a variety of forms, including changes in either costs or revenues for economic sectors associated with the affected resource or activity. An existing local economic impact model was adapted to calculate the resulting impacts on output, employment, and labor income in the local economy (the Tri-Cities Economic Risk Model or TCERM). The SAC researchers ran a test suite of 25 realization scenarios for future contamination of the Columbia River after site closure for a small subset of the radionuclides and hazardous chemicals known to be present in the environment at the Hanford Site. These scenarios of potential future river contamination were analyzed in TCERM. Although the TCERM model is sensitive to river contamination under a reasonable set of assumptions concerning reactions of the authorities and the public, the scenarios show low enough future contamination that the impacts on the local economy are small

  4. CALCULATING ECONOMIC RISK AFTER HANFORD CLEANUP

    Energy Technology Data Exchange (ETDEWEB)

    Scott, M.J.

    2003-02-27

    Since late 1997, researchers at the Hanford Site have been engaged in the Groundwater Protection Project (formerly, the Groundwater/Vadose Zone Project), developing a suite of integrated physical and environmental models and supporting data to trace the complex path of Hanford legacy contaminants through the environment for the next thousand years, and to estimate corresponding environmental, human health, economic, and cultural risks. The linked set of models and data is called the System Assessment Capability (SAC). The risk mechanism for economics consists of ''impact triggers'' (sequences of physical and human behavior changes in response to, or resulting from, human health or ecological risks), and processes by which particular trigger mechanisms induce impacts. Economic impacts stimulated by the trigger mechanisms may take a variety of forms, including changes in either costs or revenues for economic sectors associated with the affected resource or activity. An existing local economic impact model was adapted to calculate the resulting impacts on output, employment, and labor income in the local economy (the Tri-Cities Economic Risk Model or TCERM). The SAC researchers ran a test suite of 25 realization scenarios for future contamination of the Columbia River after site closure for a small subset of the radionuclides and hazardous chemicals known to be present in the environment at the Hanford Site. These scenarios of potential future river contamination were analyzed in TCERM. Although the TCERM model is sensitive to river contamination under a reasonable set of assumptions concerning reactions of the authorities and the public, the scenarios show low enough future contamination that the impacts on the local economy are small.

  5. Hepatitis Risk Assessment

    Science.gov (United States)

    ... please visit this page: About CDC.gov . Hepatitis Risk Assessment Recommend on Facebook Tweet Share Compartir Viral Hepatitis. Are you at risk? Take this 5 minute Hepatitis Risk Assessment developed ...

  6. Dutch Risk Assessment tools

    NARCIS (Netherlands)

    Venema, A.

    2015-01-01

    The ‘Risico- Inventarisatie- en Evaluatie-instrumenten’ is the name for the Dutch risk assessment (RA) tools. A RA tool can be used to perform a risk assessment including an evaluation of the identified risks. These tools were among the first online risk assessment tools developed in Europe. The

  7. Modern biogeochemistry environmental risk assessment

    CERN Document Server

    Bashkin, Vladimir N

    2006-01-01

    Most books deal mainly with various technical aspects of ERA description and calculationsAims at generalizing the modern ideas of both biogeochemical and environmental risk assessment during recent yearsAims at supplementing the existing books by providing a modern understanding of mechanisms that are responsible for the ecological risk for human beings and ecosystem

  8. Relative Hazard and Risk Measure Calculation Methodology

    International Nuclear Information System (INIS)

    Stenner, Robert D.; Strenge, Dennis L.; Elder, Matthew S.; Andrews, William B.; Walton, Terry L.

    2003-01-01

    The RHRM equations, as represented in methodology and code presented in this report, are primarily a collection of key factors normally used in risk assessment that are relevant to understanding the hazards and risks associated with projected mitigation, cleanup, and risk management activities. The RHRM code has broad application potential. For example, it can be used to compare one mitigation, cleanup, or risk management activity with another, instead of just comparing it to just the fixed baseline. If the appropriate source term data are available, it can be used in its non-ratio form to estimate absolute values of the associated controlling hazards and risks. These estimated values of controlling hazards and risks can then be examined to help understand which mitigation, cleanup, or risk management activities are addressing the higher hazard conditions and risk reduction potential at a site. Graphics can be generated from these absolute controlling hazard and risk values to graphically compare these high hazard and risk reduction potential conditions. If the RHRM code is used in this manner, care must be taken to specifically define and qualify (e.g., identify which factors were considered and which ones tended to drive the hazard and risk estimates) the resultant absolute controlling hazard and risk values

  9. GM Risk Assessment

    Science.gov (United States)

    Sparrow, Penny A. C.

    GM risk assessments play an important role in the decision-making process surrounding the regulation, notification and permission to handle Genetically Modified Organisms (GMOs). Ultimately the role of a GM risk assessment will be to ensure the safe handling and containment of the GMO; and to assess any potential impacts on the environment and human health. A risk assessment should answer all ‘what if’ scenarios, based on scientific evidence.

  10. Ecological risk assessment

    National Research Council Canada - National Science Library

    Suter, Glenn W; Barnthouse, L. W. (Lawrence W)

    2007-01-01

    Ecological risk assessment is commonly applied to the regulation of chemicals, the remediation of contaminated sites, the monitoring of importation of exotic organisms, the management of watersheds...

  11. Risk Assessment Overview

    Science.gov (United States)

    Prassinos, Peter G.; Lyver, John W., IV; Bui, Chinh T.

    2011-01-01

    Risk assessment is used in many industries to identify and manage risks. Initially developed for use on aeronautical and nuclear systems, risk assessment has been applied to transportation, chemical, computer, financial, and security systems among others. It is used to gain an understanding of the weaknesses or vulnerabilities in a system so modification can be made to increase operability, efficiency, and safety and to reduce failure and down-time. Risk assessment results are primary inputs to risk-informed decision making; where risk information including uncertainty is used along with other pertinent information to assist management in the decision-making process. Therefore, to be useful, a risk assessment must be directed at specific objectives. As the world embraces the globalization of trade and manufacturing, understanding the associated risk become important to decision making. Applying risk assessment techniques to a global system of development, manufacturing, and transportation can provide insight into how the system can fail, the likelihood of system failure and the consequences of system failure. The risk assessment can identify those elements that contribute most to risk and identify measures to prevent and mitigate failures, disruptions, and damaging outcomes. In addition, risk associated with public and environment impact can be identified. The risk insights gained can be applied to making decisions concerning suitable development and manufacturing locations, supply chains, and transportation strategies. While risk assessment has been mostly applied to mechanical and electrical systems, the concepts and techniques can be applied across other systems and activities. This paper provides a basic overview of the development of a risk assessment.

  12. Biosafety Risk Assessment Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Caskey, Susan Adele [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). International Biological Threat Reduction Program; Gaudioso, Jennifer M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). International Biological Threat Reduction Program; Salerno, Reynolds Mathewson [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). International Biological Threat Reduction Program; Wagner, Stefan M. [Public Health Agency of Canada, Winnipeg, MB (Canada). Canadian Science Centre for Human and Animal Health (CSCHAH); Shigematsu, Mika [National Inst. of Infectious Diseases (NIID), Tokyo (Japan); Risi, George [Infectious Disease Specialists, P.C, Missoula, MT (United States); Kozlovac, Joe [US Dept. of Agriculture (USDA)., Beltsville, MD (United States); Halkjaer-Knudsen, Vibeke [Statens Serum Inst., Copenhagen (Denmark); Prat, Esmeralda [Bayer CropScience, Monheim am Rhein (Germany)

    2010-10-01

    Laboratories that work with biological agents need to manage their safety risks to persons working the laboratories and the human and animal community in the surrounding areas. Biosafety guidance defines a wide variety of biosafety risk mitigation measures, which include measures which fall under the following categories: engineering controls, procedural and administrative controls, and the use of personal protective equipment; the determination of which mitigation measures should be used to address the specific laboratory risks are dependent upon a risk assessment. Ideally, a risk assessment should be conducted in a manner which is standardized and systematic which allows it to be repeatable and comparable. A risk assessment should clearly define the risk being assessed and avoid over complication.

  13. Offshore risk assessment

    CERN Document Server

    Vinnem, Jan-Erik

    2014-01-01

      Offshore Risk Assessment was the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. Risk assessment techniques have been used for more than three decades in the offshore oil and gas industry, and their use is set to expand increasingly as the industry moves into new areas and faces new challenges in older regions.   This updated and expanded third edition has been informed by a major R&D program on offshore risk assessment in Norway and summarizes research from 2006 to the present day. Rooted with a thorough discussion of risk metrics and risk analysis methodology,  subsequent chapters are devoted to analytical approaches to escalation, escape, evacuation and rescue analysis of safety and emergency systems.   Separate chapters analyze the main hazards of offshore structures: fire, explosion, collision, and falling objects as well as structural and marine hazards. Risk mitigation and control are discussed, as well as an illustrat...

  14. Calculating sales prices for natural gas. Securing success through an assessment of risks and opportunities; Vertriebspreiskalkulation Erdgas. Erfolgssicherung durch Chancen- und Risikobewertung

    Energy Technology Data Exchange (ETDEWEB)

    Gumbel, Steffen; Henze, Michael [energie quader GmbH, Darmstadt (Germany)

    2011-11-15

    Over the past years the gas market, which was once entirely supply-driven, has developed more and more into a buyer's market. Gas supply companies increasingly see themselves confronted with more innovative and varied supply inquiries from their customers. With sales margins increasingly coming under pressure, this often leaves no option but to give close consideration to the appropriate risk premium. This creates an urgent need to review existing risk assessment methods and put a stronger focus on possible opportunities.

  15. Risk assessment and risk evaluation

    International Nuclear Information System (INIS)

    Niehaus, F.

    1978-01-01

    With the help of results of investigations and model calculations the risk of nuclear energy in routine operation is shown. In this context it is pointed out that the excellent operation results of reactors all over the world have led to the acceptability of risks from local loads no longer being in question. The attention of radiation protection is therefore focused on the emissions of long-living isotopes which collect in the atmosphere. With LWRs the risk of accidents is so minimal that statistical data is, and never will be available. One has to therefore fall back upon the so-called fault tree analyses. On the subject of risk evalution the author referred to a poll in Austria. From the result of this investigation one might conclude that nuclear energy serves as a crystallization point for a discussion of varying concepts for future development. More attention should be paid to this aspect from both sides, in order to objectify the further expansion of this source of energy. (orig./HP) [de

  16. Exploration Health Risks: Probabilistic Risk Assessment

    Science.gov (United States)

    Rhatigan, Jennifer; Charles, John; Hayes, Judith; Wren, Kiley

    2006-01-01

    Maintenance of human health on long-duration exploration missions is a primary challenge to mission designers. Indeed, human health risks are currently the largest risk contributors to the risks of evacuation or loss of the crew on long-duration International Space Station missions. We describe a quantitative assessment of the relative probabilities of occurrence of the individual risks to human safety and efficiency during space flight to augment qualitative assessments used in this field to date. Quantitative probabilistic risk assessments will allow program managers to focus resources on those human health risks most likely to occur with undesirable consequences. Truly quantitative assessments are common, even expected, in the engineering and actuarial spheres, but that capability is just emerging in some arenas of life sciences research, such as identifying and minimize the hazards to astronauts during future space exploration missions. Our expectation is that these results can be used to inform NASA mission design trade studies in the near future with the objective of preventing the higher among the human health risks. We identify and discuss statistical techniques to provide this risk quantification based on relevant sets of astronaut biomedical data from short and long duration space flights as well as relevant analog populations. We outline critical assumptions made in the calculations and discuss the rationale for these. Our efforts to date have focussed on quantifying the probabilities of medical risks that are qualitatively perceived as relatively high risks of radiation sickness, cardiac dysrhythmias, medically significant renal stone formation due to increased calcium mobilization, decompression sickness as a result of EVA (extravehicular activity), and bone fracture due to loss of bone mineral density. We present these quantitative probabilities in order-of-magnitude comparison format so that relative risk can be gauged. We address the effects of

  17. Operational risk assessment.

    Science.gov (United States)

    McKim, Vicky L

    2017-06-01

    In the world of risk management, which encompasses the business continuity disciplines, many types of risk require evaluation. Financial risk is most often the primary focus, followed by product and market risks. Another critical area, which typically lacks a thorough review or may be overlooked, is operational risk. This category encompasses many risk exposure types including those around building structures and systems, environmental issues, nature, neighbours, clients, regulatory compliance, network, data security and so on. At times, insurance carriers will assess internal hazards, but seldom do these assessments include more than a cursory look at other types of operational risk. In heavily regulated environments, risk assessments are required but may not always include thorough assessments of operational exposures. Vulnerabilities may linger or go unnoticed, only to become the catalyst for a business disruption at a later time, some of which are so severe that business recovery becomes nearly impossible. Businesses may suffer loss of clients as the result of a prolonged disruption of services. Comprehensive operational risk assessments can assist in identifying such vulnerabilities, exposures and threats so that the risk can be minimised or removed. This paper lays out how an assessment of this type can be successfully conducted.

  18. Risk assessment [Chapter 9

    Science.gov (United States)

    Dennis S. Ojima; Louis R. Iverson; Brent L. Sohngen; James M. Vose; Christopher W. Woodall; Grant M. Domke; David L. Peterson; Jeremy S. Littell; Stephen N. Matthews; Anantha M. Prasad; Matthew P. Peters; Gary W. Yohe; Megan M. Friggens

    2014-01-01

    What is "risk" in the context of climate change? How can a "risk-based framework" help assess the effects of climate change and develop adaptation priorities? Risk can be described by the likelihood of an impact occurring and the magnitude of the consequences of the impact (Yohe 2010) (Fig. 9.1). High-magnitude impacts are always...

  19. Chemical Risk Assessment

    Science.gov (United States)

    This course is aimed at providing an overview of the fundamental guiding principles and general methods used in chemical risk assessment. Chemical risk assessment is a complex and ever-evolving process. These principles and methods have been organized by the National Research Cou...

  20. Complex method to calculate objective assessments of information systems protection to improve expert assessments reliability

    Science.gov (United States)

    Abdenov, A. Zh; Trushin, V. A.; Abdenova, G. A.

    2018-01-01

    The paper considers the questions of filling the relevant SIEM nodes based on calculations of objective assessments in order to improve the reliability of subjective expert assessments. The proposed methodology is necessary for the most accurate security risk assessment of information systems. This technique is also intended for the purpose of establishing real-time operational information protection in the enterprise information systems. Risk calculations are based on objective estimates of the adverse events implementation probabilities, predictions of the damage magnitude from information security violations. Calculations of objective assessments are necessary to increase the reliability of the proposed expert assessments.

  1. Overview of risk assessment

    International Nuclear Information System (INIS)

    Rimington, J.D.

    1992-01-01

    The paper begins by defining some terms, and then refer to a number of technical and other difficulties. Finally it attempts to set out why risk assessment is important and what its purposes are. 2) First, risk and risk assessment - what are they?. 3) Risk is a subject of universal significance. Life is very uncertain, and we can achieve no object or benefit in it except by approaching nearer to particular hazards which lie between us and our objects. That approach represents acceptance of risk. 4) Risk assessment is a way of systematising our approach to hazard with a view to determining what is more and what is less risky. It helps us in the end to diminish our exposure while obtaining whatever benefits we have in mind, or to optimise the risks and the benefits

  2. Overview of risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rimington, J D [Health and Safety Executive (United Kingdom)

    1992-07-01

    The paper begins by defining some terms, and then refer to a number of technical and other difficulties. Finally it attempts to set out why risk assessment is important and what its purposes are. 2) First, risk and risk assessment - what are they?. 3) Risk is a subject of universal significance. Life is very uncertain, and we can achieve no object or benefit in it except by approaching nearer to particular hazards which lie between us and our objects. That approach represents acceptance of risk. 4) Risk assessment is a way of systematising our approach to hazard with a view to determining what is more and what is less risky. It helps us in the end to diminish our exposure while obtaining whatever benefits we have in mind, or to optimise the risks and the benefits.

  3. Evaluation of the Prostate Cancer Prevention Trial Risk Calculator in a High-Risk Screening Population

    Science.gov (United States)

    Kaplan, David J.; Boorjian, Stephen A.; Ruth, Karen; Egleston, Brian L.; Chen, David Y.T.; Viterbo, Rosalia; Uzzo, Robert G.; Buyyounouski, Mark K.; Raysor, Susan; Giri, Veda N.

    2009-01-01

    Introduction Clinical factors in addition to PSA have been evaluated to improve risk assessment for prostate cancer. The Prostate Cancer Prevention Trial (PCPT) risk calculator provides an assessment of prostate cancer risk based on age, PSA, race, prior biopsy, and family history. This study evaluated the risk calculator in a screening cohort of young, racially diverse, high-risk men with a low baseline PSA enrolled in the Prostate Cancer Risk Assessment Program. Patients and Methods Eligibility for PRAP include men ages 35-69 who are African-American, have a family history of prostate cancer, or have a known BRCA1/2 mutation. PCPT risk scores were determined for PRAP participants, and were compared to observed prostate cancer rates. Results 624 participants were evaluated, including 382 (61.2%) African-American men and 375 (60%) men with a family history of prostate cancer. Median age was 49.0 years (range 34.0-69.0), and median PSA was 0.9 (range 0.1-27.2). PCPT risk score correlated with prostate cancer diagnosis, as the median baseline risk score in patients diagnosed with prostate cancer was 31.3%, versus 14.2% in patients not diagnosed with prostate cancer (p<0.0001). The PCPT calculator similarly stratified the risk of diagnosis of Gleason score ≥7 disease, as the median risk score was 36.2% in patients diagnosed with Gleason ≥7 prostate cancer versus 15.2% in all other participants (p<0.0001). Conclusion PCPT risk calculator score was found to stratify prostate cancer risk in a cohort of young, primarily African-American men with a low baseline PSA. These results support further evaluation of this predictive tool for prostate cancer risk assessment in high-risk men. PMID:19709072

  4. Patient caries risk assessment

    DEFF Research Database (Denmark)

    Twetman, Svante; Fontana, Margherita

    2009-01-01

    Risk assessment is an essential component in the decision-making process for the correct prevention and management of dental caries. Multiple risk factors and indicators have been proposed as targets in the assessment of risk of future disease, varying sometimes based on the age group at which...... they are targeted. Multiple reviews and systematic reviews are available in the literature on this topic. This chapter focusses primarily on results of reviews based on longitudinal studies required to establish the accuracy of caries risk assessment. These findings demonstrate that there is a strong body...... of evidence to support that caries experience is still, unfortunately, the single best predictor for future caries development. In young children, prediction models which include a variety of risk factors seem to increase the accuracy of the prediction, while the usefulness of additional risk factors...

  5. Avalanche risk assessment in Russia

    Science.gov (United States)

    Komarov, Anton; Seliverstov, Yury; Sokratov, Sergey; Glazovskaya, Tatiana; Turchaniniva, Alla

    2017-04-01

    The avalanche prone area covers about 3 million square kilometers or 18% of total area of Russia and pose a significant problem in most mountain regions of the country. The constant growth of economic activity, especially in the North Caucasus region and therefore the increased avalanche hazard lead to the demand of the large-scale avalanche risk assessment methods development. Such methods are needed for the determination of appropriate avalanche protection measures as well as for economic assessments during all stages of spatial planning of the territory. The requirement of natural hazard risk assessments is determined by the Federal Law of Russian Federation. However, Russian Guidelines (SP 11-103-97; SP 47.13330.2012) are not clearly presented concerning avalanche risk assessment calculations. A great size of Russia territory, vast diversity of natural conditions and large variations in type and level of economic development of different regions cause significant variations in avalanche risk values. At the first stage of research the small scale avalanche risk assessment was performed in order to identify the most common patterns of risk situations and to calculate full social risk and individual risk. The full social avalanche risk for the territory of country was estimated at 91 victims. The area of territory with individual risk values lesser then 1×10(-6) covers more than 92 % of mountain areas of the country. Within these territories the safety of population can be achieved mainly by organizational activities. Approximately 7% of mountain areas have 1×10(-6) - 1×10(-4) individual risk values and require specific mitigation measures to protect people and infrastructure. Territories with individual risk values 1×10(-4) and above covers about 0,1 % of the territory and include the most severe and hazardous mountain areas. The whole specter of mitigation measures is required in order to minimize risk. The future development of such areas is not recommended

  6. Sovereign default risk assessment

    NARCIS (Netherlands)

    Rijken, H.A.; Altman, E.I.

    2013-01-01

    We propose a new approach toward assessing sovereign risk by examining rigorously the health and aggregate default risk of a nation's private corporate sector. Models can be utilised to measure the probability of default of the non-financial sector cumulatively for five years, both as an absolute

  7. Model of MSD Risk Assessment at Workplace

    OpenAIRE

    K. Sekulová; M. Šimon

    2015-01-01

    This article focuses on upper-extremity musculoskeletal disorders risk assessment model at workplace. In this model are used risk factors that are responsible for musculoskeletal system damage. Based on statistic calculations the model is able to define what risk of MSD threatens workers who are under risk factors. The model is also able to say how MSD risk would decrease if these risk factors are eliminated.

  8. Chlorine transportation risk assessment

    International Nuclear Information System (INIS)

    Lautkaski, Risto; Mankamo, Tuomas.

    1977-02-01

    An assessment has been made on the toxication risk of the population due to the bulk rail transportation of liquid chlorine in Finland. Fourteen typical rail accidents were selected and their probability was estimated using the accident file of the Finnish State Railways. The probability of a chlorine leak was assessed for each type of accident separately using four leak size categories. The assessed leakage probability was dominated by station accidents, especially by collisions of a chlorine tanker and a locomotive. Toxication hazard areas were estimated for the leak categories. A simple model was constructed to describe the centring of the densely populated areas along the railway line. A comparison was made between the obtained risk and some other risks including those due to nuclear reactor accidents. (author)

  9. Biota Modeling in EPA's Preliminary Remediation Goal and Dose Compliance Concentration Calculators for Use in EPA Superfund Risk Assessment: Explanation of Intake Rate Derivation, Transfer Factor Compilation, and Mass Loading Factor Sources

    Energy Technology Data Exchange (ETDEWEB)

    Manning, Karessa L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dolislager, Fredrick G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bellamy, Michael B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-11-01

    The Preliminary Remediation Goal (PRG) and Dose Compliance Concentration (DCC) calculators are screening level tools that set forth Environmental Protection Agency's (EPA) recommended approaches, based upon currently available information with respect to risk assessment, for response actions at Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) sites, commonly known as Superfund. The screening levels derived by the PRG and DCC calculators are used to identify isotopes contributing the highest risk and dose as well as establish preliminary remediation goals. Each calculator has a residential gardening scenario and subsistence farmer exposure scenarios that require modeling of the transfer of contaminants from soil and water into various types of biota (crops and animal products). New publications of human intake rates of biota; farm animal intakes of water, soil, and fodder; and soil to plant interactions require updates be implemented into the PRG and DCC exposure scenarios. Recent improvements have been made in the biota modeling for these calculators, including newly derived biota intake rates, more comprehensive soil mass loading factors (MLFs), and more comprehensive soil to tissue transfer factors (TFs) for animals and soil to plant transfer factors (BV's). New biota have been added in both the produce and animal products categories that greatly improve the accuracy and utility of the PRG and DCC calculators and encompass greater geographic diversity on a national and international scale.

  10. Biota Modeling in EPA's Preliminary Remediation Goal and Dose Compliance Concentration Calculators for Use in EPA Superfund Risk Assessment: Explanation of Intake Rate Derivation, Transfer Factor Compilation, and Mass Loading Factor Sources

    International Nuclear Information System (INIS)

    Manning, Karessa L.; Dolislager, Fredrick G.; Bellamy, Michael B.

    2016-01-01

    The Preliminary Remediation Goal (PRG) and Dose Compliance Concentration (DCC) calculators are screening level tools that set forth Environmental Protection Agency's (EPA) recommended approaches, based upon currently available information with respect to risk assessment, for response actions at Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) sites, commonly known as Superfund. The screening levels derived by the PRG and DCC calculators are used to identify isotopes contributing the highest risk and dose as well as establish preliminary remediation goals. Each calculator has a residential gardening scenario and subsistence farmer exposure scenarios that require modeling of the transfer of contaminants from soil and water into various types of biota (crops and animal products). New publications of human intake rates of biota; farm animal intakes of water, soil, and fodder; and soil to plant interactions require updates be implemented into the PRG and DCC exposure scenarios. Recent improvements have been made in the biota modeling for these calculators, including newly derived biota intake rates, more comprehensive soil mass loading factors (MLFs), and more comprehensive soil to tissue transfer factors (TFs) for animals and soil to plant transfer factors (BV's). New biota have been added in both the produce and animal products categories that greatly improve the accuracy and utility of the PRG and DCC calculators and encompass greater geographic diversity on a national and international scale.

  11. Assessment of fracture risk

    International Nuclear Information System (INIS)

    Kanis, John A.; Johansson, Helena; Oden, Anders; McCloskey, Eugene V.

    2009-01-01

    Fractures are a common complication of osteoporosis. Although osteoporosis is defined by bone mineral density at the femoral neck, other sites and validated techniques can be used for fracture prediction. Several clinical risk factors contribute to fracture risk independently of BMD. These include age, prior fragility fracture, smoking, excess alcohol, family history of hip fracture, rheumatoid arthritis and the use of oral glucocorticoids. These risk factors in conjunction with BMD can be integrated to provide estimates of fracture probability using the FRAX tool. Fracture probability rather than BMD alone can be used to fashion strategies for the assessment and treatment of osteoporosis.

  12. Concerning ethical risk assessment

    International Nuclear Information System (INIS)

    Boeckle, F.

    1991-01-01

    After a fundamental consideration of the concept of responsibility and 'long-term responsibility' for late sequelae, the problems of an ehtical assessment of risks were illustrated: The concept of risk itself poses three problems - predicting the probability of occurrence, assessing the damage = subjective classification of the degree of damage, determining whether the advantages outweigh the risks. It is not possible to weigh the advantages and risks against each other without assessing the goals and the priorities which have been set. Here ethics is called for, because it concerns itself with the reasonableness of evaluative decisions. Its task is to enable us to become aware of and comprehend our system of values in all of its complexity in reference to real life. Ethics can only fulfill its task if it helps us to adopt an integral perspective, i.e. if it centers on the human being. 'One must assess all technical and economic innovations in terms of whether they are beneficial to the development of mankind on a long-term basis. They are only to be legitimized insofar as they prove themselves to be a means of liberating mankind and contributing to his sense of dignity and identity, as a means of bringing human beings together and encouraging them to care for one another, and as a means of protecting the natural basis of our existence. (orig./HSCH) [de

  13. Colorectal Cancer Risk Assessment Tool

    Science.gov (United States)

    ... 11/12/2014 Risk Calculator About the Tool Colorectal Cancer Risk Factors Download SAS and Gauss Code Page ... Rectal Cancer: Prevention, Genetics, Causes Tests to Detect Colorectal Cancer and Polyps Cancer Risk Prediction Resources Update November ...

  14. Perceived and calculated health risks: do the impacts differ

    International Nuclear Information System (INIS)

    Payne, B.A.; Williams, R.G.

    1986-01-01

    In many cases of radioactive and hazardous waste management, some members of the general public perceive that human health risks associated with the wastes are higher than the calculated risks. Calculated risks are projections that have been derived from models, and it is these risks that are usually used as the basis for waste management. However, for various reasons, the calculated risks are often considered by the public as too low or inappropriate. The reasons that calculated risks are not perceived as accurate and the factors that affect these perceptions are explored in this paper. Also discussed are the impacts related to the perceived and calculated health risks: what they are, and if and how they differ. The kinds of potential impacts examined are health effects, land value changes, and social, transportation, and economic effects. The paper concludes with a discussion of the implications of incorporating these different risk perspectives in decisions on waste management

  15. Calculation of risk for workers in dust working site

    Directory of Open Access Journals (Sweden)

    Geldová Erika

    2004-03-01

    Full Text Available The fibrogeneous dust is considered as a specific harmful substance in the mine working site. Such kind of dust cumulates in lungs and this fact usually results in lungs dusting, so - called pneumoconiosis. Thus, dustiness risk poses a probability of lungs damage by pneumoconiosis. For the calculation of dustiness risk it is needed to know the following data: the value of average dustiness kC in the working site per a definite time period, the dispersivity of dust “D” (it determines a portion of dust particles with a diameter under 5 µm, so - called respirable particles and the percentage content of quartz Qr in the respirable grain size fraction.The contribution presents the calculation of dustiness risk “R” according to the equation (1, where “R” is in percentage, “ša” is the analytically specific harmfulness and “KDc” is the total cumulative dust dose received by worker in time of its dust exposure.The total cumulative dust dose is calculated on the basis of the equation (4, where “kc” is the average dust concentration in the assessed time period, t–time of exposure, V –average amount of air inspired by exposed worker per time unit ( standardized on the value of 1,2 m3h-1,10-6-recalculation from mg to kg for “KDc”.If the values of “Qr”, “D” and “kc” during the worker exposure on a definite workplace are constant, the dustiness risk “R” is calculated according to the equation (1 and (5 respectively. In the case of “n” time intervals in that the values “Qr”, “D” and “kc” are known the dustiness risk “R” is calculated according to the equation (7. The total personal risk of worker is given by the equation (8.Conclusively, the influence of parameters change namely “Qr”, “D” and “kc” on the value of dustiness risk per equal time period is reported.

  16. Risk assessment: 'A consumer's perspective'

    Energy Technology Data Exchange (ETDEWEB)

    Waterhouse, Rachel [Consumer' s Association, Health and Safety Commission (United Kingdom)

    1992-07-01

    The paper assesses the concept of risk, risk assessment and tolerability of risk from consumer point of view. Review of existing UK and EC directives on certain products and appliances is also covered.

  17. Risk assessment: 'A consumer's perspective'

    International Nuclear Information System (INIS)

    Waterhouse, Rachel

    1992-01-01

    The paper assesses the concept of risk, risk assessment and tolerability of risk from consumer point of view. Review of existing UK and EC directives on certain products and appliances is also covered

  18. Integral risk assessment

    International Nuclear Information System (INIS)

    Chakraborty, S.; Yadigaroglu, G.

    1991-01-01

    The series of lectures which forms the basis of this book and took place in the winter of 1989/90 at the ETH in Zuerich were held for the purpose of discussing the stage of development of our system of ethics in view of the extremely fast pace of technological progress and the risks which accompany it. Legal, psychological and political aspects of the problem were examined, but the emphasis was placed on ethical aspects. The effects which are examined in conventional risk analyses can be considered as a part of the ethical and social aspects involved, and in turn, the consideration of ethical and social aspects can be viewed as an extension of the conventional form of risk analysis. In any case, among risk experts, the significance of ethical and social factors is uncontested, especially as regards activities which can have far-reaching repurcussions. Some objective difficulties interfere with this goal, however: - No generally acknowledged set of ethical values exists. - Cultural influences and personal motives can interfere. - Normally a risk assessment is carried out in reference to individual facilities and within a small, clearly defined framework. Under certain circumstances, generalizations which are made for complete technological systems can lead to completely different conclusions. One contribution deals with integral views of the risks of atomic energy from an ethical and social perspective. (orig.) [de

  19. Fire Risk Assessment in Germany

    International Nuclear Information System (INIS)

    Berg, H. P.

    2000-01-01

    Quantitative fire risk assessment can serve as an additional tool to assess the safety level of a nuclear power plant (NPP) and to set priorities for fire protection improvement measures. The recommended approach to be applied within periodic safety reviews of NPPs in Germany starts with a screening process providing critical fire zones in which a fully developed fire has the potential to both cause an initiating event and impair the function of at least one component or system critical to safety. The second step is to perform a quantitative analysis using a standard event tree has been developed with elements for fire initiation, ventilation of the room, fire detection, fire suppression, and fire propagation. In a final step, the fire induced frequency of initiating events, the main contributors and the calculated hazard state frequency for the fire event are determined. Results of the first quantitative fire risk studies performed in Germany are reported. (author)

  20. Hydrocarbons pipeline transportation risk assessment

    Science.gov (United States)

    Zanin, A. V.; Milke, A. A.; Kvasov, I. N.

    2018-04-01

    The pipeline transportation applying risks assessment issue in the arctic conditions is addressed in the paper. Pipeline quality characteristics in the given environment has been assessed. To achieve the stated objective, the pipelines mathematical model was designed and visualized by using the software product SOLIDWORKS. When developing the mathematical model the obtained results made possible to define the pipeline optimal characteristics for designing on the Arctic sea bottom. In the course of conducting the research the pipe avalanche collapse risks were examined, internal longitudinal and circular loads acting on the pipeline were analyzed, as well as the water impact hydrodynamic force was taken into consideration. The conducted calculation can contribute to the pipeline transport further development under the harsh climate conditions of the Russian Federation Arctic shelf territory.

  1. Reactor safety study. An assessment of accident risks in U. S. commercial nuclear power plants. Appendix VI. Calculation of reactor accident consequences. [PWR and BWR

    Energy Technology Data Exchange (ETDEWEB)

    1975-10-01

    Information is presented concerning the radioactive releases from the containment following accidents; radioactive inventory of the reactor core; atmospheric dispersion; reactor sites and meteorological data; radioactive decay and deposition from plumes; finite distance of plume travel; dosimetric models; health effects; demographic data; mitigation of radiation exposure; economic model; and calculated results with consequence model.

  2. Reactor safety study. An assessment of accident risks in U.S. commercial nuclear power plants. Appendix VI. Calculation of reactor accident consequences

    International Nuclear Information System (INIS)

    1975-10-01

    Information is presented concerning the radioactive releases from the containment following accidents; radioactive inventory of the reactor core; atmospheric dispersion; reactor sites and meteorological data; radioactive decay and deposition from plumes; finite distance of plume travel; dosimetric models; health effects; demographic data; mitigation of radiation exposure; economic model; and calculated results with consequence model

  3. Stochastic calculations for radiation risk assessment: a Monte-Carlo approach to the simulation of radiocesium transport in the pasture-cow-milk food chain

    Energy Technology Data Exchange (ETDEWEB)

    Mathies, M; Eisfeld, K; Paretzke, H; Wirth, E [Gesellschaft fuer Strahlen- und Umweltforschung m.b.H. Muenchen, Neuherberg (Germany, F.R.). Inst. fuer Strahlenschutz

    1981-05-01

    The effects of introducing probability distributions of the parameters in radionuclide transport models are investigated. Results from a Monte-Carlo simulation were presented for the transport of /sup 137/Cs via the pasture-cow-milk pathway, taking into the account the uncertainties and naturally occurring fluctuations in the rate constants. The results of the stochastic model calculations characterize the activity concentrations at a given time t and provide a great deal more information for analysis of the environmental transport of radionuclides than deterministic calculations in which the variation of parameters is not taken into consideration. Moreover the stochastic model permits an estimate of the variation of the physico-chemical behaviour of radionuclides in the environment in a more realistic way than by using only the highest transfer coefficients in deterministic approaches, which can lead to non-realistic overestimates of the probability with which high activity levels will be encountered.

  4. Hazard waste risk assessment

    International Nuclear Information System (INIS)

    Hawley, K.A.; Napier, B.A.

    1986-01-01

    Pacific Northwest Laboratory continued to provide technical assistance to the Department of Energy (DOE) Office of Operational Safety (OOS) in the area of risk assessment for hazardous and radioactive-mixed waste management. The overall objective is to provide technical assistance to OOS in developing cost-effective risk assessment tools and strategies for bringing DOE facilities into compliance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA or Superfund) and the Resource Conservation and Recovery Act (RCRA). Major efforts during FY 1985 included (1) completing the modification of the Environmental Protection Agency (EPA) Hazard Ranking System (HRS) and developing training manuals and courses to assist in field office implementation of the modified Hazard Ranking System (mHRS); (2) initiating the development of a system for reviewing field office HRS/mHRS evaluations for appropriate use of data and appropriate application of the methodology; (3) initiating the development of a data base management system to maintain all field office HRS/mHRS scoring sheets and to support the master OOS environmental data base system; (4) developing implementation guidance for Phase I of the DOE CERCLA Program, Installation Assessment; (5) continuing to develop an objective, scientifically based methodology for DOE management to use in establishing priorities for conducting site assessments under Phase II of the DOE CERCLA Program, Confirmation; and (6) participating in developing the DOE response to EPA on the proposed listing of three sites on the National Priorities List

  5. Risk assessment handbook

    International Nuclear Information System (INIS)

    Farmer, F.G.; Jones, J.L.; Hunt, R.N.; Roush, M.L.; Wierman, T.E.

    1990-09-01

    The Probabilistic Risk Assessment Unit at EG ampersand G Idaho has developed this handbook to provide guidance to a facility manager exploring the potential benefit to be gained by performance of a risk assessment properly scoped to meet local needs. This document is designed to help the manager control the resources expended commensurate with the risks being managed and to assure that the products can be used programmatically to support future needs in order to derive maximum beneflt from the resources expended. We present a logical and functional mapping scheme between several discrete phases of project definition to ensure that a potential customer, working with an analyst, is able to define the areas of interest and that appropriate methods are employed in the analysis. In addition the handbook is written to provide a high-level perspective for the analyst. Previously, the needed information was either scattered or existed only in the minds of experienced analysts. By compiling this information and exploring the breadth of knowledge which exists within the members of the PRA Unit, the functional relationships between the customers' needs and the product have been established

  6. Risk assessment - black art or science?

    International Nuclear Information System (INIS)

    Moore, G.

    1988-01-01

    Measures of risk can be divided into two categories, those that observe or calculate the risk of a process or project, and those that rely on the level of risk as perceived by the people during the assessment. Collection of data of accidents (where cause and effect are obvious) and experiments on animals which can then be extrapolated to humans, are two ways of risk assessment. Mathematical models and computerized simulations, using either fault tree analysis or Monte Carlo methods are explained simply. Using these methods, experts are able to perceive risk fairly realistically. However, the general public's perception of risk is often quite different, as potential risk is assessed in different ways. The concept of tolerable risk is considered, particularly with reference to nuclear reactors such as Sizewell-B. The need to inform the public of safeguards and safety procedures so they have a better understanding of the risks of nuclear power is stressed. (U.K.)

  7. Thyroid Cancer Risk Assessment Tool

    Science.gov (United States)

    The R package thyroid implements a risk prediction model developed by NCI researchers to calculate the absolute risk of developing a second primary thyroid cancer (SPTC) in individuals who were diagnosed with a cancer during their childhood.

  8. 2007 TOXICOLOGY AND RISK ASSESSMENT ...

    Science.gov (United States)

    EPA has announced The 2007 Toxicology and Risk Assessment Conference Cincinnati Marriott North, West Chester (Cincinnati), OHApril 23- 26, 2007 - Click to register!The Annual Toxicology and Risk Assessment Conference is a unique meeting where several Government Agencies come together to discuss toxicology and risk assessment issues that are not only of concern to the government, but also to a broader audience including academia and industry. The theme of this year's conference is Emerging Issues and Challenges in Risk Assessment and the preliminary agenda includes: Plenary Sessions and prominent speakers (tentative) include: Issues of Emerging Chemical ContaminantsUncertainty and Variability in Risk Assessment Use of Mechanistic data in IARC evaluationsParallel Sessions:Uncertainty and Variability in Dose-Response Assessment Recent Advances in Toxicity and Risk Assessment of RDX The Use of Epidemiologic Data for Risk Assessment Applications Cumulative Health Risk Assessment:

  9. Effectiveness of personalized and interactive health risk calculators: a randomized trial.

    Science.gov (United States)

    Harle, Christopher A; Downs, Julie S; Padman, Rema

    2012-01-01

    Risk calculators are popular websites that provide individualized disease risk assessments to the public. Little is known about their effect on risk perceptions and health behavior. This study sought to test whether risk calculator features-namely, personalized estimates of one's disease risk and feedback about the effects of risk-mitigating behaviors-improve risk perceptions and motivate healthy behavior. A web-based experimental study using simple randomization was conducted to compare the effects of 3 prediabetes risk communication websites. Setting The study was conducted in the context of ongoing health promotion activities sponsored by a university's human resources office. Patients Participants were adult university employees. Intervention The control website presented nonindividualized risk information. The personalized noninteractive website presented individualized risk calculations. The personalized interactive website presented individualized risk calculations and feedback about the effects of hypothetical risk-mitigating behaviors. Measurements Pre- and postintervention risk perceptions were measured in absolute and relative terms. Health behavior was measured by assessing participant interest in follow-up preventive health services. On average, risk perceptions decreased by 2%. There was no general effect of personalization or interactivity in aligning subjective risk perceptions with objective risk calculations or in increasing healthy behaviors. However, participants who previously overestimated their risk reduced their perceptions by 16%. This was a significantly larger change than the 2% increase by participants who underestimated their risk. Limitations Results may not generalize to different populations, different diseases, or longer-term outcomes. Compared to nonpersonalized information, individualized risk calculators had little positive effect on prediabetes risk perception accuracy or health behavior. Risk perception accuracy was improved in

  10. Smartphone apps for calculating insulin dose: a systematic assessment.

    Science.gov (United States)

    Huckvale, Kit; Adomaviciute, Samanta; Prieto, José Tomás; Leow, Melvin Khee-Shing; Car, Josip

    2015-05-06

    Medical apps are widely available, increasingly used by patients and clinicians, and are being actively promoted for use in routine care. However, there is little systematic evidence exploring possible risks associated with apps intended for patient use. Because self-medication errors are a recognized source of avoidable harm, apps that affect medication use, such as dose calculators, deserve particular scrutiny. We explored the accuracy and clinical suitability of apps for calculating medication doses, focusing on insulin calculators for patients with diabetes as a representative use for a prevalent long-term condition. We performed a systematic assessment of all English-language rapid/short-acting insulin dose calculators available for iOS and Android. Searches identified 46 calculators that performed simple mathematical operations using planned carbohydrate intake and measured blood glucose. While 59% (n = 27/46) of apps included a clinical disclaimer, only 30% (n = 14/46) documented the calculation formula. 91% (n = 42/46) lacked numeric input validation, 59% (n = 27/46) allowed calculation when one or more values were missing, 48% (n = 22/46) used ambiguous terminology, 9% (n = 4/46) did not use adequate numeric precision and 4% (n = 2/46) did not store parameters faithfully. 67% (n = 31/46) of apps carried a risk of inappropriate output dose recommendation that either violated basic clinical assumptions (48%, n = 22/46) or did not match a stated formula (14%, n = 3/21) or correctly update in response to changing user inputs (37%, n = 17/46). Only one app, for iOS, was issue-free according to our criteria. No significant differences were observed in issue prevalence by payment model or platform. The majority of insulin dose calculator apps provide no protection against, and may actively contribute to, incorrect or inappropriate dose recommendations that put current users at risk of both catastrophic overdose and more

  11. A hierarchical procedure for calculation of risk importance measures

    International Nuclear Information System (INIS)

    Poern, K.; Dinsmore, S.C.

    1987-01-01

    Starting with a general importance definition based on conditional probabilities, a hierarchical process for calculating risk importance measures from a PSA's numerical results is developed. By the appropriate choice of events in the general definition, measures such as the risk achievement worth and the risk reduction worth can be calculated without requantifying the PSA's models. Required approximations are clearly defined and the subsequent constraints on the applicability of the process discussed. (orig.)

  12. Surgery Risk Assessment (SRA) Database

    Data.gov (United States)

    Department of Veterans Affairs — The Surgery Risk Assessment (SRA) database is part of the VA Surgical Quality Improvement Program (VASQIP). This database contains assessments of selected surgical...

  13. Assessment of technical risks

    Energy Technology Data Exchange (ETDEWEB)

    Jaeger, T A [Bundesanstalt fuer Materialpruefung, Berlin (Germany, F.R.)

    1978-01-01

    The safety of technical systems is so difficult to assess because the concept 'risk' contains technical-scientific factors as well as components of individual and social psychology. Immediate or short-term hazards of human life as i.e. caused by the operation of industrial plants and mediate and thus long-term hazards have to be distinguished. Characteristic for the second hazard groups is the great time-lag before the effect takes place. Thus a causal relationship can be recognized only late and not definitely. Even when the causes have been obviated the effects still show. The development of a systems-analytical model as a basis of decisive processes for the introduction of highly endangered large-scale technologies seems particularly difficult. A starting point for the quantification of the risk can still be seen in the product of the probability of realization and the extent of the damage. Public opinion, however, does not base its evaluations on an objective concept of risk but tends to have an attitude of aversion against great and disastrous accidents. On the other hand, plenty of slight accidents are accepted much more easily, even when the amount of deadly victims from accidents reaches dimensions beyond those of the rare large-scale accidents. Here, mostly the damage possible but not the probability of its occurence is seen, let alone the general use of the new technology. The value of the mathematical models for estimating risks is mainly due to the fact that they are able to clear up decisions.

  14. Assessment of chemical exposures: calculation methods for environmental professionals

    National Research Council Canada - National Science Library

    Daugherty, Jack E

    1997-01-01

    ... on by scientists, businessmen, and policymakers. Assessment of Chemical Exposures: Calculation Methods for Environmental Professionals addresses the expanding scope of exposure assessments in both the workplace and environment...

  15. Risk assessment and risk management of mycotoxins.

    Science.gov (United States)

    2012-01-01

    Risk assessment is the process of quantifying the magnitude and exposure, or probability, of a harmful effect to individuals or populations from certain agents or activities. Here, we summarize the four steps of risk assessment: hazard identification, dose-response assessment, exposure assessment, and risk characterization. Risk assessments using these principles have been conducted on the major mycotoxins (aflatoxins, fumonisins, ochratoxin A, deoxynivalenol, and zearalenone) by various regulatory agencies for the purpose of setting food safety guidelines. We critically evaluate the impact of these risk assessment parameters on the estimated global burden of the associated diseases as well as the impact of regulatory measures on food supply and international trade. Apart from the well-established risk posed by aflatoxins, many uncertainties still exist about risk assessments for the other major mycotoxins, often reflecting a lack of epidemiological data. Differences exist in the risk management strategies and in the ways different governments impose regulations and technologies to reduce levels of mycotoxins in the food-chain. Regulatory measures have very little impact on remote rural and subsistence farming communities in developing countries, in contrast to developed countries, where regulations are strictly enforced to reduce and/or remove mycotoxin contamination. However, in the absence of the relevant technologies or the necessary infrastructure, we highlight simple intervention practices to reduce mycotoxin contamination in the field and/or prevent mycotoxin formation during storage.

  16. Assessment of seismic margin calculation methods

    International Nuclear Information System (INIS)

    Kennedy, R.P.; Murray, R.C.; Ravindra, M.K.; Reed, J.W.; Stevenson, J.D.

    1989-03-01

    Seismic margin review of nuclear power plants requires that the High Confidence of Low Probability of Failure (HCLPF) capacity be calculated for certain components. The candidate methods for calculating the HCLPF capacity as recommended by the Expert Panel on Quantification of Seismic Margins are the Conservative Deterministic Failure Margin (CDFM) method and the Fragility Analysis (FA) method. The present study evaluated these two methods using some representative components in order to provide further guidance in conducting seismic margin reviews. It is concluded that either of the two methods could be used for calculating HCLPF capacities. 21 refs., 9 figs., 6 tabs

  17. Caries risk assessment

    DEFF Research Database (Denmark)

    Mejàre, I; Axelsson, S; Dahlén, G

    2014-01-01

    OBJECTIVE: To assess the ability of multivariate models and single factors to correctly identify future caries development in pre-school children and schoolchildren/adolescents. STUDY DESIGN: A systematic literature search for relevant papers was conducted with pre-determined inclusion criteria...... predictors, baseline caries experience had moderate/good accuracy in pre-school children and limited accuracy in schoolchildren/adolescents. The period of highest risk for caries incidence in permanent teeth was the first few years after tooth eruption. In general, the quality of evidence was limited....... CONCLUSIONS: Multivariate models and baseline caries prevalence performed better in pre-school children than in schoolchildren/adolescents. Baseline caries prevalence was the most accurate single predictor in all age groups. The heterogeneity of populations, models, outcome criteria, measures and reporting...

  18. Methods of risk assessment

    International Nuclear Information System (INIS)

    Jones, D.R.

    1981-01-01

    The subject is discussed under the headings: introduction (identification, quantification of risk); some approaches to risk evaluation (use of the 'no risk' principle; the 'acceptable risk' method; risk balancing; comparison of risks, benefits and other costs); cost benefit analysis; an alternative approach (tabulation and display; description and reduction of the data table); identification of potential decision sets consistent with the constraints. Some references are made to nuclear power. (U.K.)

  19. Risk assessments ensure safer power

    Energy Technology Data Exchange (ETDEWEB)

    1982-02-19

    A growth industry is emerging devoted to the study and comparison of the economic, social and health risks posed by large industrial installations. Electricity generation is one area coming under particularly close scrutiny. Types of risk, ways of assessing risk and the difference between experts' analyses and the public perception of risk are given. An example of improved risk assessment helping to reduce deaths and injuries in coal mining is included.

  20. Defense Programs Transportation Risk Assessment

    International Nuclear Information System (INIS)

    Clauss, D.B.

    1994-01-01

    This paper provides an overview of the methodology used in a probabilistic transportation risk assessment conducted to assess the probabilities and consequences of inadvertent dispersal of radioactive materials arising from severe transportation accidents. The model was developed for the Defense Program Transportation Risk Assessment (DPTRA) study. The analysis incorporates several enhancements relative to previous risk assessments of hazardous materials transportation including newly-developed statistics on the frequencies and severities of tractor semitrailer accidents and detailed route characterization using the 1990 Census data

  1. Application of probabilistic risk assessment to reprocessing

    International Nuclear Information System (INIS)

    Perkins, W.C.

    1984-01-01

    The Savannah River Laboratory uses probabilistic methods of risk assessment in safety analyses of reprocessing facilities at the Savannah River Plant. This method uses both the probability of an accident and its consequence to calculate the risks from radiological, chemical, and industrial hazards. The three principal steps in such an assesment are identification of accidents, calculation of frequencies, and consequence quantification. The tools used at SRL include several databanks, logic tree methods, and computer-assisted methods for calculating both frequencies and consequences. 5 figures

  2. Risk assessment for halogenated solvents

    International Nuclear Information System (INIS)

    Travis, C.C.

    1988-01-01

    A recent development in the cancer risk area is the advent of biologically based pharmacokinetic and pharmacodynamic models. These models allow for the incorporation of biological and mechanistic data into the risk assessment process. These advances will not only improve the risk assessment process for halogenated solvents but will stimulate and guide basic research in the biological area

  3. Risk Factor Assessment Branch (RFAB)

    Science.gov (United States)

    The Risk Factor Assessment Branch (RFAB) focuses on the development, evaluation, and dissemination of high-quality risk factor metrics, methods, tools, technologies, and resources for use across the cancer research continuum, and the assessment of cancer-related risk factors in the population.

  4. HTGR accident and risk assessment

    International Nuclear Information System (INIS)

    Silady, F.A.; Everline, C.J.; Houghton, W.J.

    1982-01-01

    This paper is a synopsis of the high-temperature gas-cooled reactor probabilistic risk assessments (PRAs) performed by General Atomic Company. Principal topics presented include: HTGR safety assessments, peer interfaces, safety research, process gas explosions, quantitative safety goals, licensing applications of PRA, enhanced safety, investment risk assessments, and PRA design integration

  5. Assessing Risk of Innovation

    International Nuclear Information System (INIS)

    Allgood, GO

    2001-01-01

    Today's manufacturing systems and equipment must perform at levels thought impossible a decade ago. Companies must push operations, quality, and efficiencies to unprecedented levels while holding down costs. In this new economy, companies must be concerned with market shares, equity growth, market saturation, and profit. U.S. manufacturing is no exception and is a prime example of businesses forced to adapt to constant and rapid changes in customer needs and product mixes, giving rise to the term ''Agile Manufacturing''. The survival and ultimate success of the American Manufacturing economy may depend upon its ability to create, innovate, and quickly assess the impact that new innovations will have on its business practices. Given the need for flexibility, companies need proven methods to predict and measure the impact that new technologies and strategies will have on overall plant performance from an enterprise perspective. The Value-Derivative Model provides a methodology and approach to assess such impacts in terms of energy savings, production increases, quality impacts, emission reduction, and maintenance and operating costs as they relate to enabling and emerging technologies. This is realized by calculating a set of first order sensitivity parameters obtained from expanding a Taylor Series about the system's operating point. These sensitivity parameters are invariant economic and operational indicators that quantify the impact of any proposed technology in terms of material throughput, efficiency, energy usage, environmental effects, and costs. These parameters also provide a mechanism to define metrics and performance measures that can be qualified in terms of real economic impact. Value-Derivative Analysis can be applied across all manufacturing and production segments of our economy and has found specific use in steel and textiles. Where economic models give the cost of conducting a business, Value-Derivative Analysis provides the cost to conduct

  6. Information needs for risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    DeRosa, C.T.; Choudhury, H.; Schoeny, R.S.

    1990-12-31

    Risk assessment can be thought of as a conceptual approach to bridge the gap between the available data and the ultimate goal of characterizing the risk or hazard associated with a particular environmental problem. To lend consistency to and to promote quality in the process, the US Environmental Protection Agency (EPA) published Guidelines for Risk Assessment of Carcinogenicity, Developmental Toxicity, Germ Cell Mutagenicity and Exposure Assessment, and Risk Assessment of Chemical Mixtures. The guidelines provide a framework for organizing the information, evaluating data, and for carrying out the risk assessment in a scientifically plausible manner. In the absence of sufficient scientific information or when abundant data are available, the guidelines provide alternative methodologies that can be employed in the risk assessment. 4 refs., 3 figs., 2 tabs.

  7. Tensit - a simulation tool for migration, risk and dose calculations

    International Nuclear Information System (INIS)

    Jones, J.; Kautsky, U.; Vahlund, C.F.

    2004-01-01

    During the next years the Swedish Nuclear Fuel and Waste Management Co (SKB) performs site investigations for a future repository of spent nuclear fuel. The repository will be situated in crystalline rock at a depth of approximately 500 m. Novel methods based on systems and landscape ecology are developed to understand the interacting mechanisms and finally, to model radionuclide migration in the biosphere using site specific data. These models and methods are later used as part of the overall safety assessment for the repository where also migration in the near field and in the bedrock is considered. In the present paper, a newly developed probabilistic simulation package, TENSIT, is presented. The package is based on pre-existing codes (Matlab, Simulink and the probabilistic engine-at-risk) and is capable of performing radionuclide migration calculations both for the repository and the biosphere. Hence, a platform independent, transparent (well documented and intuitive on a model scale), thoroughly supported, efficient and user friendly (graphical interface for the modeler) code can be developed at a fairly low cost. Comparisons with other codes used for compartment based biosphere modelling and the PSACOIN Level 1B exercise shows on a good agreement on the application scale. Moreover, by basing the package on continuously maintained, pre-existing codes, potential risks associated with a less spread software may be avoided. In addition to the compartment based models based on transfer factors, TENSIT is also able to handle the more complex ecosystem models (based on flow of carbon and nutrients) either separately or in combination with the compartment models. Within the project, biosphere migration calculations have been performed using TENSIT for a watershed in the Forsmark area (one of the studied sites). In this simulation, data from the ongoing site investigation program has been used to define the based model. (author)

  8. [Forensic assessment of violence risk].

    Science.gov (United States)

    Pujol Robinat, Amadeo; Mohíno Justes, Susana; Gómez-Durán, Esperanza L

    2014-03-01

    Over the last 20 years there have been steps forward in the field of scientific research on prediction and handling different violent behaviors. In this work we go over the classic concept of "criminal dangerousness" and the more current of "violence risk assessment". We analyze the evolution of such assessment from the practice of non-structured clinical expert opinion to current actuarial methods and structured clinical expert opinion. Next we approach the problem of assessing physical violence risk analyzing the HCR-20 (Assessing Risk for Violence) and we also review the classic and complex subject of the relation between mental disease and violence. One of the most problematic types of violence, difficult to assess and predict, is sexual violence. We study the different actuarial and sexual violence risk prediction instruments and in the end we advise an integral approach to the problem. We also go through partner violence risk assessment, describing the most frequently used scales, especially SARA (Spouse Assault Risk Assessment) and EPV-R. Finally we give practical advice on risk assessment, emphasizing the importance of having maximum information about the case, carrying out a clinical examination, psychopathologic exploration and the application of one of the described risk assessment scales. We'll have to express an opinion about the dangerousness/risk of future violence from the subject and some recommendations on the conduct to follow and the most advisable treatment. Copyright © 2014 Elsevier España, S.L. All rights reserved.

  9. Risk assessment and regulation

    International Nuclear Information System (INIS)

    1981-01-01

    The approach to determining how safe is safe for the nuclear industry is to ensure that the risks are comparable with or less than those of other safe industries. There are some problems in implementing such an approach, because the effects of low levels of radiation are stochastic and assumptions are required in estimating the risks. A conservative approach has generally been adopted. Risk estimates across different activities are a useful indication of where society may be overspending or underspending to reduce risk, but the analysis has to take account of public preferences. Once risks have been estimated, limits may be chosen which the industry is expected to meet under normal and postulated accident conditions. Limits have been set so that nuclear risks do not exceed those in safe industries, and under normal conditions nuclear facilities operate at levels far below these specified limits

  10. Risk calculations in the manufacturing technology selection process

    DEFF Research Database (Denmark)

    Farooq, S.; O'Brien, C.

    2010-01-01

    Purpose - The purpose of this paper is to present result obtained from a developed technology selection framework and provide a detailed insight into the risk calculations and their implications in manufacturing technology selection process. Design/methodology/approach - The results illustrated...... in the paper are the outcome of an action research study that was conducted in an aerospace company. Findings - The paper highlights the role of risk calculations in manufacturing technology selection process by elaborating the contribution of risk associated with manufacturing technology alternatives...... in the shape of opportunities and threats in different decision-making environments. Practical implications - The research quantifies the risk associated with different available manufacturing technology alternatives. This quantification of risk crystallises the process of technology selection decision making...

  11. Models for Pesticide Risk Assessment

    Science.gov (United States)

    EPA considers the toxicity of the pesticide as well as the amount of pesticide to which a person or the environments may be exposed in risk assessment. Scientists use mathematical models to predict pesticide concentrations in exposure assessment.

  12. Using risk assessment in periodontics.

    Science.gov (United States)

    Woodman, Alan J

    2014-08-01

    Risk assessment has become a regular feature in both dental practice and society as a whole, and principles used to assess risk in society are similar to those used in a clinical setting. Although the concept of risk assessment as a prognostic indicator for periodontal disease incidence and activity is well established in the management of periodontitis, the use of risk assessment to manage the practical treatment of periodontitis and its sequelae appears to have less foundation. A simple system of initial risk assessment - building on the use of the Basic Periodontal Examination (BPE), clinical, medical and social factors - is described, linked to protocols for delivering care suited to general dental practice and stressing the role of long-term supportive care. The risks of not treating the patient are considered, together with the possible causes of failure, and the problems of successful treatment are illustrated by the practical management of post-treatment recession.

  13. A methodology for reviewing probabilistic risk assessments

    International Nuclear Information System (INIS)

    Derby, S.L.

    1983-01-01

    The starting point for peer review of a Probabilistic Risk Assessment (PRA) is a clear understanding of how the risk estimate was prepared and of what contributions dominate the calculation. The problem facing the reviewers is how to cut through the complex details of a PRA to gain this understanding. This paper presents a structured, analytical procedure that solves this problem. The effectiveness of this solution is demonstrated by an application on the Zion Probabilistic Safety Study. The procedure found the three dominant initiating events and provided a simplified reconstruction of the calculation of the risk estimate. Significant assessments of uncertainty were also identified. If peer review disputes the accuracy of these judgments, then the revised risk estimate could significantly increase

  14. Environmental Risk Communication through Qualitative Risk Assessment

    Directory of Open Access Journals (Sweden)

    Sabre J. Coleman

    2014-06-01

    Full Text Available Environmental analysts are often hampered in communicating the risks of environmental contaminants due to the myriad of regulatory requirements that are applicable. The use of a qualitative, risk-based control banding strategy for assessment and control of potential environmental contaminants provides a standardized approach to improve risk communication. Presented is a model that provides an effective means for determining standardized responses and controls for common environmental issues based on the level of risk. The model is designed for integration within an occupational health and safety management system to provide a multidisciplinary environmental and occupational risk management approach. This environmental model, which utilizes multidisciplinary control banding strategies for delineating risk, complements the existing Risk Level Based Management System, a proven method in a highly regulated facility for occupational health and safety. A simplified environmental risk matrix is presented that is stratified over four risk levels. Examples of qualitative environmental control banding strategies are presented as they apply to United States regulations for construction, research activities, facility maintenance, and spill remediation that affect air, water, soil, and waste disposal. This approach offers a standardized risk communication language for multidisciplinary issues that will improve communications within and between environmental health and safety professionals, workers, and management.

  15. Mixtures of toxic agents and attributable risk calculations

    International Nuclear Information System (INIS)

    Seiler, F.A.; Scott, B.R.

    1987-01-01

    Calculations of attributable risks have attracted increasing interest recently. However, these efforts have been limited to mostly one agent, radiation, and no interactions with effects of other toxic agents have been taken into account. This paper outlines a generic approach to the calculation of attributable risks for an exposure to several toxic agents and interaction effects associated with them. In this calculation, the partition of interaction terms between the agents responsible is of particular importance. At present, there are no rules on how to assign equitable shares, so one methodology will be proposed and others discussed briefly. For one example of an assignment, the standard errors of the attributable risks are determined in terms of the uncertainties of the input parameters, thus setting the stage for a comparison of the different shares of responsibility

  16. RESIDUAL RISK ASSESSMENT: ETHYLENE OXIDE ...

    Science.gov (United States)

    This document describes the residual risk assessment for the Ethylene Oxide Commercial Sterilization source category. For stationary sources, section 112 (f) of the Clean Air Act requires EPA to assess risks to human health and the environment following implementation of technology-based control standards. If these technology-based control standards do not provide an ample margin of safety, then EPA is required to promulgate addtional standards. This document describes the methodology and results of the residual risk assessment performed for the Ethylene Oxide Commercial Sterilization source category. The results of this analyiss will assist EPA in determining whether a residual risk rule for this source category is appropriate.

  17. Calculation of the quantities of radiation risk in Japanese population

    International Nuclear Information System (INIS)

    Nakamura, Yuji

    1993-01-01

    The purpose of this study was to reevaluate various kinds of indicators of radiation risks using additive projection and multiplicative projection models, as proposed by ICRP. Total death probability rate (1985) and probability rate of cancer death (1983 to 1987) were used as data base. The following indicators were calculated: total conditional death probability rate and conditional death probability rate; normalized death age probability density and unconditional death probability rate; attributable life-time probability of cancer death; and other risk indicators, including mean loss of life expectancy, reduction of life expectancy, mean annually committed probability of attributable cancer deaths, annual extra probability of cancer death, probability density of the age of death, maximum relative death probability rate (age at maximum relative rate), and probabilistic aging. In terms of calculations of these risk indicators for the comprehensive cancer death, there was no great difference between the Japanese population and ICRP. When calculating according to sites of cancer, calculations of indicators for cancer mortality (or cancer cure rate) in the Japanese population might bedifferent from ICRP's calculation. (N.K.) different from ICRP's calculations. (N.K.)

  18. PRECIS -- A probabilistic risk assessment system

    International Nuclear Information System (INIS)

    Peterson, D.M.; Knowlton, R.G. Jr.

    1996-01-01

    A series of computer tools has been developed to conduct the exposure assessment and risk characterization phases of human health risk assessments within a probabilistic framework. The tools are collectively referred to as the Probabilistic Risk Evaluation and Characterization Investigation System (PRECIS). With this system, a risk assessor can calculate the doses and risks associated with multiple environmental and exposure pathways, for both chemicals and radioactive contaminants. Exposure assessment models in the system account for transport of contaminants to receptor points from a source zone originating in unsaturated soils above the water table. In addition to performing calculations of dose and risk based on initial concentrations, PRECIS can also be used in an inverse manner to compute soil concentrations in the source area that must not be exceeded if prescribed limits on dose or risk are to be met. Such soil contaminant levels, referred to as soil guidelines, are computed for both single contaminants and chemical mixtures and can be used as action levels or cleanup levels. Probabilistic estimates of risk, dose and soil guidelines are derived using Monte Carlo techniques

  19. RAFT: a computer program for fault tree risk calculations

    International Nuclear Information System (INIS)

    Seybold, G.D.

    1977-11-01

    A description and user instructions are presented for RAFT, a FORTRAN computer code for calculation of a risk measure for fault tree cut sets. RAFT calculates release quantities and a risk measure based on the product of probability and release quantity for cut sets of fault trees modeling the accidental release of radioactive material from a nuclear fuel cycle facility. Cut sets and their probabilities are supplied as input to RAFT from an external fault tree analysis code. Using the total inventory available of radioactive material, along with release fractions for each event in a cut set, the release terms are calculated for each cut set. Each release term is multiplied by the cut set probability to yield the cut set risk measure. RAFT orders the dominant cut sets on the risk measure. The total risk measure of processed cut sets and their fractional contributions are supplied as output. Input options are available to eliminate redundant cut sets, apply threshold values on cut set probability and risk, and control the total number of cut sets output. Hash addressing is used to remove redundant cut sets from the analysis. Computer hardware and software restrictions are given along with a sample problem and cross-reference table of the code. Except for the use of file management utilities, RAFT is written exclusively in FORTRAN language and is operational on a Control Data, CYBER 74-18--series computer system. 4 figures

  20. Risk indices in comparative risk assessment studies

    International Nuclear Information System (INIS)

    Hubert, P.

    1984-01-01

    More than a decade ago the development of comparative risk assessment studies aroused overwhelming interest. There was no doubt that data on the health and safety aspects of energy systems would greatly benefit, or even end, the debate on nuclear energy. Although such attempts are still strongly supported, the rose-coloured expectations of the early days have faded. The high uncertainties, and the contradictory aspect, of the first results might explain this evolution. The loose connection between the range of computed risk indices and the questions on which the debate was focused is another reason for this decline in interest. Important research work is being carried out aiming at reducing the different kinds of uncertainties. Rather than the uncertainties, the paper considers the meaning of available risk indices and proposes more significant indices with respect to the goals of risk assessment. First, the indices which are of frequent use in comparative studies are listed. The stress is put on a French comparative study from which most examples are drawn. Secondly, the increase in magnitude of the indices and the decrease in the attributability of the risk to a given system is shown to be a consequence of the trend towards more comprehensive analyses. Thirdly, the ambiguity of such indices as the collective occupational risk is underlined, and a possible solution is suggested. Whenever risk assessments are related to pragmatic decision making problems it is possible to find satisfactory risk indices. The development of cost-effectiveness analyses and the proposals for quantitative safety goals clearly demonstrate this point. In the field of comparison of social impacts some proposals are made, but there remain some gaps still to be filled. (author)

  1. Engineering aspects of probabilistic risk assessment

    International Nuclear Information System (INIS)

    vonHerrmann, J.L.; Wood, P.J.

    1984-01-01

    Over the last decade, the use of probabilistic risk assessment (PRA) in the nuclear industry has expanded significantly. In these analyses the probabilities of experiencing certain undesired events (for example, a plant accident which results in damage to the nuclear fuel) are estimated and the consequences of these events are evaluated in terms of some common measure. These probabilities and consequences are then combined to form a representation of the risk associated with the plant studied. In the relatively short history of probabilistic risk assessment of nuclear power plants, the primary motivation for these studies has been the quantitative assessment of public risk associated with a single plant or group of plants. Accordingly, the primary product of most PRAs performed to date has been a 'risk curve' in which the probability (or expected frequency) of exceeding a certain consequence level is plotted against that consequence. The most common goal of these assessments has been to demonstrate the 'acceptability' of the calculated risk by comparison of the resultant risk curve to risk curves associated with other plants or with other societal risks. Presented here are brief descriptions of some alternate applications of PRAs, a discussion of how these other applications compare or contrast with the currently popular uses of PRA, and a discussion of the relative benefits of each

  2. Implications of probabilistic risk assessment

    International Nuclear Information System (INIS)

    Cullingford, M.C.; Shah, S.M.; Gittus, J.H.

    1987-01-01

    Probabilistic risk assessment (PRA) is an analytical process that quantifies the likelihoods, consequences and associated uncertainties of the potential outcomes of postulated events. Starting with planned or normal operation, probabilistic risk assessment covers a wide range of potential accidents and considers the whole plant and the interactions of systems and human actions. Probabilistic risk assessment can be applied in safety decisions in design, licensing and operation of industrial facilities, particularly nuclear power plants. The proceedings include a review of PRA procedures, methods and technical issues in treating uncertainties, operating and licensing issues and future trends. Risk assessment for specific reactor types or components and specific risks (eg aircraft crashing onto a reactor) are used to illustrate the points raised. All 52 articles are indexed separately. (U.K.)

  3. Relative Hazard and Risk Measure Calculation Methodology Rev 1

    International Nuclear Information System (INIS)

    Stenner, Robert D.; White, Michael K.; Strenge, Dennis L.; Aaberg, Rosanne L.; Andrews, William B.

    2000-01-01

    Documentation of the methodology used to calculate relative hazard and risk measure results for the DOE complex wide risk profiles. This methodology is used on major site risk profiles. In February 1997, the Center for Risk Excellence (CRE) was created and charged as a technical, field-based partner to the Office of Science and Risk Policy (EM-52). One of the initial charges to the CRE is to assist the sites in the development of ''site risk profiles.'' These profiles are to be relatively short summaries (periodically updated) that present a broad perspective on the major risk related challenges that face the respective site. The risk profiles are intended to serve as a high-level communication tool for interested internal and external parties to enhance the understanding of these risk-related challenges. The risk profiles for each site have been designed to qualitatively present the following information: (1) a brief overview of the site, (2) a brief discussion on the historical mission of the site, (3) a quote from the site manager indicating the site's commitment to risk management, (4) a listing of the site's top risk-related challenges, (5) a brief discussion and detailed table presenting the site's current risk picture, (6) a brief discussion and detailed table presenting the site's future risk reduction picture, and (7) graphic illustrations of the projected management of the relative hazards at the site. The graphic illustrations were included to provide the reader of the risk profiles with a high-level mental picture to associate with all the qualitative information presented in the risk profile. Inclusion of these graphic illustrations presented the CRE with the challenge of how to fold this high-level qualitative risk information into a system to produce a numeric result that would depict the relative change in hazard, associated with each major risk management action, so it could be presented graphically. This report presents the methodology developed

  4. Site remediation guided by risk assessment

    International Nuclear Information System (INIS)

    McBean, E.A.; Gowing, A.; Pieczonka, G.

    2002-01-01

    'Full text:' Risk assessment (RA) provides an effective tool for identifying hazards with respect to human health and ecological receptors, hazards that arise from contaminants in the environment. Risk assessment relies upon: hazard identification/problem formulation; toxicity assessment; exposure assessment; and risk characterization. Hence, risk assessment provides an effective guide for site remediation through the identification of the associated risks arising from pre- and potential post-remediation activities. As a demonstration of this decision-making process, a site-specific risk assessment (SSRA) was performed on a chemical producing facility. Historical waste practices during the production of DDT compounds resulted in impacted site soils and sediment and soils of the creek passing through the facility. The purpose of the SSRA was to derive site-specific cleanup values for the impacted on-site soils, creek sediments, and embankment soils, incorporating human and ecological receptors associated with the environmental media. The human exposure pathways considered were dermal contact, incidental ingestion, and inhalation of the various soils. The potential human receptors were industrial workers, construction workers, trespassers, and off-site residents. Ingestion of fish from the creek by residents was also evaluated in the human health risk assessment (HHRA). Food web analyses were used to evaluate the impact of exposure to chemical compounds in aquatic sediments and related soils by ecological receptors such as the great blue heron, raccoon, and mink. The SSRA involved modelling the daily chemical intake by receptors and the transfer of chemicals to identified secondary media (e.g., ambient air or animal tissues) that are also potential exposure media. These models, while using the site-specific chemical data in the source media, possess uncertainties associated with default parameters that are only approximations and not site-specific (e.g., soil

  5. Tools for Microbiological risk assessment

    DEFF Research Database (Denmark)

    Bassett, john; Nauta, Maarten; Lindqvist, Roland

    can increase the understanding of microbiological risks in foods. It is timely to inform food safety professionals about the availability and utility of MRA tools. Therefore, the focus of this report is to aid the food safety manager by providing a concise summary of the tools available for the MRA......Microbiological Risk Assessment (MRA) has emerged as a comprehensive and systematic approach for addressing the risk of pathogens in specific foods and/or processes. At government level, MRA is increasingly recognised as a structured and objective approach to understand the level of risk in a given...... food/pathogen scenario. Tools developed so far support qualitative and quantitative assessments of the risk that a food pathogen poses to a particular population. Risk can be expressed as absolute numbers or as relative (ranked) risks. The food industry is beginning to appreciate that the tools for MRA...

  6. Assessment of risk from radiation sources

    International Nuclear Information System (INIS)

    Subbaratnam, T.; Madhvanath, U.; Somasundaram, S.

    1976-01-01

    Assessment of risk from exposure to ionizing radiations from man-made radiation sources and nuclear installations has to be viewed from three aspects, namely, dose-effect relationship (genetic and somatic) for humans, calculation of doses or dose-commitments to population groups, assessment of risk to radiation workers and the population at large from the current levels of exposure from nuclear industry and comparison of risk estimates with other industries in a modern society. These aspects are discussed in brief. On the basis of available data, it is shown that estimated incidence of genetic diseases and cancers due to exposure of population to radiation from nuclear industry is negligible in comparison with their natural incidence, and radiation risks to the workers in nuclear industry are much lower than the risks in other occupations. (M.G.B.)

  7. Clinical Validity, Understandability, and Actionability of Online Cardiovascular Disease Risk Calculators: Systematic Review.

    Science.gov (United States)

    Bonner, Carissa; Fajardo, Michael Anthony; Hui, Samuel; Stubbs, Renee; Trevena, Lyndal

    2018-02-01

    Online health information is particularly important for cardiovascular disease (CVD) prevention, where lifestyle changes are recommended until risk becomes high enough to warrant pharmacological intervention. Online information is abundant, but the quality is often poor and many people do not have adequate health literacy to access, understand, and use it effectively. This project aimed to review and evaluate the suitability of online CVD risk calculators for use by low health literate consumers in terms of clinical validity, understandability, and actionability. This systematic review of public websites from August to November 2016 used evaluation of clinical validity based on a high-risk patient profile and assessment of understandability and actionability using Patient Education Material Evaluation Tool for Print Materials. A total of 67 unique webpages and 73 unique CVD risk calculators were identified. The same high-risk patient profile produced widely variable CVD risk estimates, ranging from as little as 3% to as high as a 43% risk of a CVD event over the next 10 years. One-quarter (25%) of risk calculators did not specify what model these estimates were based on. The most common clinical model was Framingham (44%), and most calculators (77%) provided a 10-year CVD risk estimate. The calculators scored moderately on understandability (mean score 64%) and poorly on actionability (mean score 19%). The absolute percentage risk was stated in most (but not all) calculators (79%), and only 18% included graphical formats consistent with recommended risk communication guidelines. There is a plethora of online CVD risk calculators available, but they are not readily understandable and their actionability is poor. Entering the same clinical information produces widely varying results with little explanation. Developers need to address actionability as well as clinical validity and understandability to improve usefulness to consumers with low health literacy.

  8. Integrated climate change risk assessment:

    DEFF Research Database (Denmark)

    Kaspersen, Per Skougaard; Halsnæs, Kirsten

    2017-01-01

    Risk assessments of flooding in urban areas during extreme precipitation for use in, for example, decision-making regarding climate adaptation, are surrounded by great uncertainties stemming from climate model projections, methods of downscaling and the assumptions of socioeconomic impact models...... to address the complex linkages between the different kinds of data required in assessing climate adaptation. It emphasizes that the availability of spatially explicit data can reduce the overall uncertainty of the risk assessment and assist in identifying key vulnerable assets. The usefulness...... of such a framework is demonstrated by means of a risk assessment of flooding from extreme precipitation for the city of Odense, Denmark. A sensitivity analysis shows how the presence of particularly important assets, such as cultural and historical heritage, may be addressed in assessing such risks. The output...

  9. Carcinogen risk assessment

    International Nuclear Information System (INIS)

    Hazelwoold, R.N.

    1987-01-01

    This article describes the methods by which risk factors for carcinogenic hazards are determined and the limitations inherent in the process. From statistical and epidemiological studies, the major identifiable factors related to cancer in the United States were determined to be cigarette smoking, diet, reproductive and sexual behavior, infections, ultraviolet and ionizing radiation, and alcohol consumption. The incidence of lung cancer due to air pollutants was estimated to be less than 2%. Research needs were discussed

  10. Probabilistic risk assessment methodology

    International Nuclear Information System (INIS)

    Shinaishin, M.A.

    1988-06-01

    The objective of this work is to provide the tools necessary for clear identification of: the purpose of a Probabilistic Risk Study, the bounds and depth of the study, the proper modeling techniques to be used, the failure modes contributing to the analysis, the classical and baysian approaches for manipulating data necessary for quantification, ways for treating uncertainties, and available computer codes that may be used in performing such probabilistic analysis. In addition, it provides the means for measuring the importance of a safety feature to maintaining a level of risk at a Nuclear Power Plant and the worth of optimizing a safety system in risk reduction. In applying these techniques so that they accommodate our national resources and needs it was felt that emphasis should be put on the system reliability analysis level of PRA. Objectives of such studies could include: comparing systems' designs of the various vendors in the bedding stage, and performing grid reliability and human performance analysis using national specific data. (author)

  11. Probabilistic risk assessment methodology

    Energy Technology Data Exchange (ETDEWEB)

    Shinaishin, M A

    1988-06-15

    The objective of this work is to provide the tools necessary for clear identification of: the purpose of a Probabilistic Risk Study, the bounds and depth of the study, the proper modeling techniques to be used, the failure modes contributing to the analysis, the classical and baysian approaches for manipulating data necessary for quantification, ways for treating uncertainties, and available computer codes that may be used in performing such probabilistic analysis. In addition, it provides the means for measuring the importance of a safety feature to maintaining a level of risk at a Nuclear Power Plant and the worth of optimizing a safety system in risk reduction. In applying these techniques so that they accommodate our national resources and needs it was felt that emphasis should be put on the system reliability analysis level of PRA. Objectives of such studies could include: comparing systems' designs of the various vendors in the bedding stage, and performing grid reliability and human performance analysis using national specific data. (author)

  12. Probabilistic risk assessment, Volume I

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    This book contains 158 papers presented at the International Topical Meeting on Probabilistic Risk Assessment held by the American Nuclear Society (ANS) and the European Nuclear Society (ENS) in Port Chester, New York in 1981. The meeting was second in a series of three. The main focus of the meeting was on the safety of light water reactors. The papers discuss safety goals and risk assessment. Quantitative safety goals, risk assessment in non-nuclear technologies, and operational experience and data base are also covered. Included is an address by Dr. Chauncey Starr

  13. Risk assessment in maritime transportation

    International Nuclear Information System (INIS)

    Soares, C. Guedes; Teixeira, A.P.

    2001-01-01

    A review is presented of different approaches to quantify the risk in maritime transportation. The discussion of several accident statistics provides a global assessment of the risk levels and its differentiation in ship types and main types of ship losses. Early studies in the probability of ship loss by foundering and capsizing are reviewed. The approaches used to assess the risk of structural design are addressed. Finally a brief account is given of recent development of using formal safety assessments to support decision making on legislation applicable internationally to maritime transportation

  14. Framework for ecological risk assessment

    International Nuclear Information System (INIS)

    Rodier, D.; Norton, S.

    1992-02-01

    Increased interest in ecological issues such as global climate change, habitat loss, acid deposition, reduced biological diversity, and the ecological impacts of pesticides and toxic chemicals prompts this U.S. Environmental Protection Agency (EPA) report, A Framework for Ecological Risk Assessment ('Framework Report'). The report describes basic elements, or a framework, for evaluating scientific information on the adverse effects of physical and chemical stressors on the environment. The framework offers starting principles and a simple structure as guidance for current ecological risk assessments and as a foundation for future EPA proposals for risk assessment guidelines

  15. Risk Assessment and Integration Team (RAIT) Portfolio Risk Analysis Strategy

    Science.gov (United States)

    Edwards, Michelle

    2010-01-01

    Impact at management level: Qualitative assessment of risk criticality in conjunction with risk consequence, likelihood, and severity enable development of an "investment policy" towards managing a portfolio of risks. Impact at research level: Quantitative risk assessments enable researchers to develop risk mitigation strategies with meaningful risk reduction results. Quantitative assessment approach provides useful risk mitigation information.

  16. Quantitative risk assessment system (QRAS)

    Science.gov (United States)

    Weinstock, Robert M (Inventor); Smidts, Carol S (Inventor); Mosleh, Ali (Inventor); Chang, Yung-Hsien (Inventor); Swaminathan, Sankaran (Inventor); Groen, Francisco J (Inventor); Tan, Zhibin (Inventor)

    2001-01-01

    A quantitative risk assessment system (QRAS) builds a risk model of a system for which risk of failure is being assessed, then analyzes the risk of the system corresponding to the risk model. The QRAS performs sensitivity analysis of the risk model by altering fundamental components and quantifications built into the risk model, then re-analyzes the risk of the system using the modifications. More particularly, the risk model is built by building a hierarchy, creating a mission timeline, quantifying failure modes, and building/editing event sequence diagrams. Multiplicities, dependencies, and redundancies of the system are included in the risk model. For analysis runs, a fixed baseline is first constructed and stored. This baseline contains the lowest level scenarios, preserved in event tree structure. The analysis runs, at any level of the hierarchy and below, access this baseline for risk quantitative computation as well as ranking of particular risks. A standalone Tool Box capability exists, allowing the user to store application programs within QRAS.

  17. Risk Assessment in Finland: Theory and Practice

    Directory of Open Access Journals (Sweden)

    Hannu Anttonen

    2010-09-01

    Full Text Available The Finnish risk assessment practice is based on the Occupational Safety and Health Act aiming to improve working conditions in order maintain the employees' work ability, and to prevent occupational accidents and diseases. In practice there are hundreds of risk assessment methods in use. A simple method is used in SME's and more complex risk evaluation methods in larger work places. Does the risk management function in the work places in Finland? According to our experience something more is needed. That is, understanding of common and company related benefits of risk management. The wider conclusion is that commitment for risk assessment in Finland is high enough. However, in those enterprises where OSH management was at an acceptable level or above it, there were also more varied and more successfully accomplished actions to remove or reduce the risks than in enterprises, where OSH management was in lower level. In risk assessment it is important to process active technical prevention and exact communication, increase work place attraction and increase job satisfaction and motivation. Investments in occupational safety and health are also good business. Low absenteeism due to illness or accidents increases directly the production results by improved quality and quantity of the product. In general Finnish studies have consistently shown that the return of an invested euro is three to seven-old. In national level, according to our calculations the savings could be even 20% of our gross national product.

  18. Risk assessment: An employer's perspective

    International Nuclear Information System (INIS)

    Williams, K.C.

    1992-01-01

    There is no question that a careful assessment of risk is essential for safe industrial operations. For that reason, a thoughtful analysis of the effectiveness of available risk assessment technologies is prerequisite for responsible corporate decision making. An 'employer's' perspective on risk assessment cannot be constrained by any artificial restrictions which that term may imply. In reality, all those who are involved in the execution of an industrial enterprise: managers, regulators, the affected public, and especially those employees exposed to hazards, are necessarily partners in assessment of risk. The perspective of this paper is that of the oil and gas industry, in which the author's organization, Exxon Company, International, participates. The paper addresses what Exxon requires to assess and manage risk in its worldwide operations. The author is aware, however, through contacts with industry colleagues, that some of Exxon's initiatives are representative of similar actions being taken by others. 1992 is the European Year of Safety, Health and Hygiene, coinciding with the United Kingdom's Presidency of the European Council. It is also the year in which new 'goal-setting' regulations covering safety in the U.K. offshore oil industry were put forward by the Health and Safety Commission. These regulations, based largely on Lord Cullen's recommendations following the Piper Alpha tragedy, set the pace for safety in the British North Sea and will significantly impact the safety of offshore oil installations worldwide. The requirement for risk assessment, using a systematic process of analysing and evaluating risk, is a key component of this safety regime

  19. Risk assessment: An employer's perspective

    Energy Technology Data Exchange (ETDEWEB)

    Williams, K C [Exxon International (United States)

    1992-07-01

    There is no question that a careful assessment of risk is essential for safe industrial operations. For that reason, a thoughtful analysis of the effectiveness of available risk assessment technologies is prerequisite for responsible corporate decision making. An 'employer's' perspective on risk assessment cannot be constrained by any artificial restrictions which that term may imply. In reality, all those who are involved in the execution of an industrial enterprise: managers, regulators, the affected public, and especially those employees exposed to hazards, are necessarily partners in assessment of risk. The perspective of this paper is that of the oil and gas industry, in which the author's organization, Exxon Company, International, participates. The paper addresses what Exxon requires to assess and manage risk in its worldwide operations. The author is aware, however, through contacts with industry colleagues, that some of Exxon's initiatives are representative of similar actions being taken by others. 1992 is the European Year of Safety, Health and Hygiene, coinciding with the United Kingdom's Presidency of the European Council. It is also the year in which new 'goal-setting' regulations covering safety in the U.K. offshore oil industry were put forward by the Health and Safety Commission. These regulations, based largely on Lord Cullen's recommendations following the Piper Alpha tragedy, set the pace for safety in the British North Sea and will significantly impact the safety of offshore oil installations worldwide. The requirement for risk assessment, using a systematic process of analysing and evaluating risk, is a key component of this safety regime.

  20. Building Better Environmental Risk Assessments

    Science.gov (United States)

    Layton, Raymond; Smith, Joe; Macdonald, Phil; Letchumanan, Ramatha; Keese, Paul; Lema, Martin

    2015-01-01

    Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision-making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERAs) for genetically modified (GM) crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems – examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data), and adapting advances in risk analysis from other relevant disciplines. PMID:26301217

  1. Building Better Environmental Risk Assessments.

    Science.gov (United States)

    Layton, Raymond; Smith, Joe; Macdonald, Phil; Letchumanan, Ramatha; Keese, Paul; Lema, Martin

    2015-01-01

    Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision-making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERAs) for genetically modified (GM) crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems - examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data), and adapting advances in risk analysis from other relevant disciplines.

  2. Building better environmental risk assessments

    Directory of Open Access Journals (Sweden)

    Raymond eLayton

    2015-08-01

    Full Text Available Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERA for genetically modified (GM crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems – examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data, and adapting advances in risk analysis from other relevant disciplines.

  3. Risk assessment in international operations

    International Nuclear Information System (INIS)

    Stricklin, Daniela L.

    2008-01-01

    During international peace-keeping missions, a diverse number of non-battle hazards may be encountered, which range from heavily polluted areas, endemic disease, toxic industrial materials, local violence, traffic, and even psychological factors. Hence, elevated risk levels from a variety of sources are encountered during deployments. With the emphasis within the Swedish military moving from national defense towards prioritization of international missions in atypical environments, the risk of health consequences, including long term health effects, has received greater consideration. The Swedish military is interested in designing an optimal approach for assessment of health threats during deployments. The Medical Intelligence group at FOI CBRN Security and Defence in Umea has, on request from and in collaboration with the Swedish Armed Forces, reviewed a variety of international health threat and risk assessment models for military operations. Application of risk assessment methods used in different phases of military operations will be reviewed. An overview of different international approaches used in operational risk management (ORM) will be presented as well as a discussion of the specific needs and constraints for health risk assessment in military operations. This work highlights the specific challenges of risk assessment that are unique to the deployment setting such as the assessment of exposures to a variety of diverse hazards concurrently

  4. Probability calculations for three-part mineral resource assessments

    Science.gov (United States)

    Ellefsen, Karl J.

    2017-06-27

    Three-part mineral resource assessment is a methodology for predicting, in a specified geographic region, both the number of undiscovered mineral deposits and the amount of mineral resources in those deposits. These predictions are based on probability calculations that are performed with computer software that is newly implemented. Compared to the previous implementation, the new implementation includes new features for the probability calculations themselves and for checks of those calculations. The development of the new implementation lead to a new understanding of the probability calculations, namely the assumptions inherent in the probability calculations. Several assumptions strongly affect the mineral resource predictions, so it is crucial that they are checked during an assessment. The evaluation of the new implementation leads to new findings about the probability calculations,namely findings regarding the precision of the computations,the computation time, and the sensitivity of the calculation results to the input.

  5. Assessment and perception of risk

    Energy Technology Data Exchange (ETDEWEB)

    Daglish, J

    1981-01-01

    A recent two-day meeting was called by the Royal Society to discuss all types of risks, but symptomatic of the concerns of most of those present, the discussion centred mainly on the risks inherent in energy production and use. Among the subjects considered were public perception of differing risks, and how these are ranked, and risks versus benefits. Quotations from and summaries of many of the papers presented show that it was generally felt that scientists must be very careful in the way that they use numerical assessments of risk and that they should pay more attention than they have to social and political factors.

  6. Evaluating risk using bounding calculations and limited data; TOPICAL

    International Nuclear Information System (INIS)

    COWLEY, W.L.

    1999-01-01

    This paper describes a methodology for estimating the potential risk to workers and the public from igniting organic solvents in any of the 177 underground waste storage tanks at the Hanford Site in southeastern Washington state. The Hanford Site is one of the U.S. Department of Energy's former production facilities for nuclear materials. The tanks contain mixed radioactive wastes. Risk is measured by calculating toxicological and radiological accident consequences and frequencies and comparing the results to established regulatory guidelines. Available sample data is insufficient to adequately characterize the waste and solvent, so a model that maximizes releases from the tanks (bounding case) is used. Maximizing releases (and thus consequences) is a standard technique used in safety analysis to compensate for lack of information. The model predicts bounding values of fire duration, the time at which the fire extinguishes because of lack of oxygen, and a pressure history of a fire in a tank. The model output is used to calculate mass and volume release rates of material from the tanks. The mass and volume release rates permit calculation of radiological and toxicological consequences. The resulting consequence calculations demonstrate that risk from an organic solvent fire in the tanks is within regulatory guidelines

  7. Estimating risk using bounding calculations and limited data

    International Nuclear Information System (INIS)

    COWLEY, W.L.

    1999-01-01

    This paper describes a methodology for estimating the potential risk to workers and the public from igniting organic solvents in any of the 177 underground waste storage tanks at the Hanford Site in southeastern Washington state. The Hanford Site is one of the U.S. Department of Energy's former production facilities for nuclear materials. The tanks contain mixed radioactive wastes. Risk is measured by calculating toxicological and radiological accident consequences and frequencies and comparing the results to established regulatory guidelines. Available sample data is insufficient to adequately characterize the waste and solvent, so a model that maximizes releases from the tanks (bounding case) is used. Maximizing releases (and thus consequences) is a standard technique used in safety analysis to compensate for lack of information. The model predicts bounding values of fire duration, the time at which the fire extinguishes because of lack of oxygen, and a pressure history of a fire in a tank. The model output is used to calculate mass and volume release rates of material from the tanks. The mass and volume release rates permit calculation of radiological and toxicological consequences. The resulting consequence calculations demonstrate that risk from an organic solvent fire in the tanks is within regulatory guidelines

  8. Assessing risk of draft survey by AHP method

    Science.gov (United States)

    Xu, Guangcheng; Zhao, Kuimin; Zuo, Zhaoying; Liu, Gang; Jian, Binguo; Lin, Yan; Fan, Yukun; Wang, Fei

    2018-04-01

    The paper assesses the risks of vessel floating in the seawater for draft survey by using the analytic hierarchy process. On this basis, the paper established draft survey risk index from the view of draft reading, ballast water, fresh water, and calculation process and so on. Then the paper proposes the method to deal with risk assessment using one concrete sample.

  9. Deterministic quantitative risk assessment development

    Energy Technology Data Exchange (ETDEWEB)

    Dawson, Jane; Colquhoun, Iain [PII Pipeline Solutions Business of GE Oil and Gas, Cramlington Northumberland (United Kingdom)

    2009-07-01

    Current risk assessment practice in pipeline integrity management is to use a semi-quantitative index-based or model based methodology. This approach has been found to be very flexible and provide useful results for identifying high risk areas and for prioritizing physical integrity assessments. However, as pipeline operators progressively adopt an operating strategy of continual risk reduction with a view to minimizing total expenditures within safety, environmental, and reliability constraints, the need for quantitative assessments of risk levels is becoming evident. Whereas reliability based quantitative risk assessments can be and are routinely carried out on a site-specific basis, they require significant amounts of quantitative data for the results to be meaningful. This need for detailed and reliable data tends to make these methods unwieldy for system-wide risk k assessment applications. This paper describes methods for estimating risk quantitatively through the calibration of semi-quantitative estimates to failure rates for peer pipeline systems. The methods involve the analysis of the failure rate distribution, and techniques for mapping the rate to the distribution of likelihoods available from currently available semi-quantitative programs. By applying point value probabilities to the failure rates, deterministic quantitative risk assessment (QRA) provides greater rigor and objectivity than can usually be achieved through the implementation of semi-quantitative risk assessment results. The method permits a fully quantitative approach or a mixture of QRA and semi-QRA to suit the operator's data availability and quality, and analysis needs. For example, consequence analysis can be quantitative or can address qualitative ranges for consequence categories. Likewise, failure likelihoods can be output as classical probabilities or as expected failure frequencies as required. (author)

  10. Risk assessment future cash flows

    OpenAIRE

    Chachina H. G.

    2012-01-01

    This article is about risk assessment in planning future cash flows. Discount rate in DCF-model must include four factors: risk cash flow, inflation, value of investments, turnover assets. This has an influence net present value cash flow and make his incomparable.

  11. Test reactor risk assessment methodology

    International Nuclear Information System (INIS)

    Jennings, R.H.; Rawlins, J.K.; Stewart, M.E.

    1976-04-01

    A methodology has been developed for the identification of accident initiating events and the fault modeling of systems, including common mode identification, as these methods are applied in overall test reactor risk assessment. The methods are exemplified by a determination of risks to a loss of primary coolant flow in the Engineering Test Reactor

  12. Anthropic Risk Assessment on Biodiversity

    Science.gov (United States)

    Piragnolo, M.; Pirotti, F.; Vettore, A.; Salogni, G.

    2013-01-01

    This paper presents a methodology for risk assessment of anthropic activities on habitats and species. The method has been developed for Veneto Region, in order to simplify and improve the quality of EIA procedure (VINCA). Habitats and species, animals and plants, are protected by European Directive 92/43/EEC and 2009/147/EC but they are subject at hazard due to pollution produced by human activities. Biodiversity risks may conduct to deterioration and disturbance in ecological niches, with consequence of loss of biodiversity. Ecological risk assessment applied on Natura 2000 network, is needed to best practice of management and monitoring of environment and natural resources. Threats, pressure and activities, stress and indicators may be managed by geodatabase and analysed using GIS technology. The method used is the classic risk assessment in ecological context, and it defines the natural hazard as influence, element of risk as interference and vulnerability. Also it defines a new parameter called pressure. It uses risk matrix for the risk analysis on spatial and temporal scale. The methodology is qualitative and applies the precautionary principle in environmental assessment. The final product is a matrix which excludes the risk and could find application in the development of a territorial information system.

  13. Cloud computing assessing the risks

    CERN Document Server

    Carstensen, Jared; Golden, Bernard

    2012-01-01

    Cloud Computing: Assessing the risks answers these questions and many more. Using jargon-free language and relevant examples, analogies and diagrams, it is an up-to-date, clear and comprehensive guide the security, governance, risk, and compliance elements of Cloud Computing.

  14. Improving pandemic influenza risk assessment

    Science.gov (United States)

    Assessing the pandemic risk posed by specific non-human influenza A viruses remains a complex challenge. As influenza virus genome sequencing becomes cheaper, faster and more readily available, the ability to predict pandemic potential from sequence data could transform pandemic influenza risk asses...

  15. Evaluation of thermal risk assessment

    International Nuclear Information System (INIS)

    Loos, J.J.; Perry, E.S.

    1993-01-01

    Risk assessment was done in 1983 to estimate the ecological hazard of increasing the generating load and thermal output of an electric generating station. Subsequently, long-term monitoring in the vicinity of the station allowed verification of the predictions made in the risk assessment. This presentation will review the efficacy of early risk assessment methods in producing useful predictions from a resource management point of view. In 1984, the Chalk Point Generating facility of the Potomac Electric Power Company increased it's median generating load by 100%. Prior to this operational change, the Academy of Natural Sciences of Philadelphia synthesized site specific data, model predictions, and results from literature to assess the risk of additional waste heat to the Patuxent River subestuary of Chesapeake Bay. Risk was expressed as the number of days per year that various species of fish and the blue crab would be expected to avoid the discharge vicinity. Accuracy of these predictions is assessed by comparing observed fish and crab distributions and their observed frequencies of avoidance to those predicted. It is concluded that the predictions of this early risk assessment were sufficiently accurate to produce a reliable resource management decision

  16. Assessment and uncertainty analysis of groundwater risk.

    Science.gov (United States)

    Li, Fawen; Zhu, Jingzhao; Deng, Xiyuan; Zhao, Yong; Li, Shaofei

    2018-01-01

    Groundwater with relatively stable quantity and quality is commonly used by human being. However, as the over-mining of groundwater, problems such as groundwater funnel, land subsidence and salt water intrusion have emerged. In order to avoid further deterioration of hydrogeological problems in over-mining regions, it is necessary to conduct the assessment of groundwater risk. In this paper, risks of shallow and deep groundwater in the water intake area of the South-to-North Water Transfer Project in Tianjin, China, were evaluated. Firstly, two sets of four-level evaluation index system were constructed based on the different characteristics of shallow and deep groundwater. Secondly, based on the normalized factor values and the synthetic weights, the risk values of shallow and deep groundwater were calculated. Lastly, the uncertainty of groundwater risk assessment was analyzed by indicator kriging method. The results meet the decision maker's demand for risk information, and overcome previous risk assessment results expressed in the form of deterministic point estimations, which ignore the uncertainty of risk assessment. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. A methodology for reviewing Probabilistic Risk Assessments

    International Nuclear Information System (INIS)

    Derby, S.L.

    1983-01-01

    The starting point for peer review of a Probabilistic Risk Assessment (PRA) is a clear understanding of how the risk estimate was prepared and of what contributions dominate the calculation. The problem facing the reviewers is how to cut through the complex details of a PRA to gain this understanding. This paper presents a structured, analytical procedure that solves this problem. The effectiveness of this solution is demonstrated by an application on the Zion Probabilistic Safety Study. The procedure found the three dominant initiating events and provided a simplified reconstruction of the calculation of the risk estimate. Significant assessments of uncertainty were also identified. If peer review disputes the accuracy of these judgments, then the revised risk estimate could significantly increase. The value of this procedure comes from having a systematic framework for the PRA review. Practical constraints limit the time and qualified people needed for an adequate review. Having the established framework from this procedure as a starting point, reviewers can focus most of their attention on the accuracy and the completeness of the calculation. Time wasted at the start of the review is reduced by first using this procedure to sort through the technical details of the PRA and to reconstruct the risk estimate from dominant contributions

  18. Pathology and risk assessment

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Programs for providing basic data for use in evaluating the hazard to man from exposure to radiation and other energy-related pollutants are reviewed. A computer program was developed that takes the existing mortality and fertility data on a given population and applies dose-response coefficients and estimated increments of exposure to chemical or radioactive effluents and derives the excess deaths by age and sex for 5-year intervals. The program was used in an analysis of the health effects of airborne coal combustion effluents. Preliminary results are reported from a study of the influence of products of fossil fuel combustion on the spontaneous activity patterns and daily metabolic cycles of mice as a factor of age, environment, and genetic constitution. Preliminary results are reported from studies on the early and late effects of polycyclic hydrocarbons on the immune competence of mice. Studies to determine the risk to human populations from radionuclides released to the environment from nuclear energy facilities use relative toxicity and dose response data from laboratory animals of different body size and life span and comparisons of the effects of internal exposure with those of external exposure to fission neutrons or gamma sources

  19. Taking the Risk Out of Risk Assessment

    Science.gov (United States)

    2005-01-01

    The ability to understand risks and have the right strategies in place when risky events occur is essential in the workplace. More and more organizations are being confronted with concerns over how to measure their risks or what kind of risks they can take when certain events transpire that could have a negative impact. NASA is one organization that faces these challenges on a daily basis, as effective risk management is critical to the success of its missions especially the Space Shuttle missions. On July 29, 1996, former NASA Administrator Daniel Goldin charged NASA s Office of Safety and Mission Assurance with developing a probabilistic risk assessment (PRA) tool to support decisions on the funding of Space Shuttle upgrades. When issuing the directive, Goldin said, "Since I came to NASA [in 1992], we've spent billions of dollars on Shuttle upgrades without knowing how much they improve safety. I want a tool to help base upgrade decisions on risk." Work on the PRA tool began immediately. The resulting prototype, the Quantitative Risk Assessment System (QRAS) Version 1.0, was jointly developed by NASA s Marshall Space Flight Center, its Office of Safety and Mission Assurance, and researchers at the University of Maryland. QRAS software automatically expands the reliability logic models of systems to evaluate the probability of highly detrimental outcomes occurring in complex systems that are subject to potential accident scenarios. Even in its earliest forms, QRAS was used to begin PRA modeling of the Space Shuttle. In parallel, the development of QRAS continued, with the goal of making it a world-class tool, one that was especially suited to NASA s unique needs. From the beginning, an important conceptual goal in the development of QRAS was for it to help bridge the gap between the professional risk analyst and the design engineer. In the past, only the professional risk analyst could perform, modify, use, and perhaps even adequately understand PRA. NASA wanted

  20. Competing risk theory and radiation risk assessment

    International Nuclear Information System (INIS)

    Groer, P.G.

    1980-01-01

    New statistical procedures are applied to estimate cumulative distribution functions (c.d.f.), force of mortality, and latent period for radiation-induced malignancies. It is demonstrated that correction for competing risks influences the shape of dose response curves, estimates of the latent period, and of the risk from ionizing radiations. The equivalence of the following concepts is demonstrated: force of mortality, hazard rate, and age or time specific incidence. This equivalence makes it possible to use procedures from reliability analysis and demography for radiation risk assessment. Two methods used by reliability analysts - hazard plotting and total time on test plots - are discussed in some detail and applied to characterize the hazard rate in radiation carcinogenesis. C.d.f.'s with increasing, decreasing, or constant hazard rate have different shapes and are shown to yield different dose-response curves for continuous irradiation. Absolute risk is shown to be a sound estimator only if the force of mortality is constant for the exposed and the control group. Dose-response relationships that use the absolute risk as a measure for the effect turn out to be special cases of dose-response relationships that measure the effect with cumulative incidence. (H.K.)

  1. Caries risk assessment in children

    DEFF Research Database (Denmark)

    Twetman, S

    2016-01-01

    PURPOSE: To summarise the findings of recent systematic reviews (SR) covering caries risk assessment in children, updated with recent primary studies. METHODS: A search for relevant papers published 2012-2014 was conducted in electronic databases. The systematic reviews were quality assessed...... displayed a high risk of bias. CONCLUSIONS: Based on the present summary of literature, it may be concluded: (1) a caries risk assessment should be carried out at the child's first dental visit and reassessments should be done during childhood (D); (2) multivariate models display a better accuracy than...... the use of single predictors and this is especially true for preschool children (C); (3) there is no clearly superior method to predict future caries and no evidence to support the use of one model, program, or technology before the other (C); and (4) the risk category should be linked to appropriate...

  2. Risk assessment research and technology assessment

    International Nuclear Information System (INIS)

    Albach, H.; Schade, D.; Sinn, H.

    1991-01-01

    The concepts and approaches for technology assessment, the targets and scientific principles, as well as recognizable deficits and recommendations concerning purposeful strategies for the promotion of this research field require a dialog between those concerned. Conception, deficits, and the necessary measures for risk assessment research and technology assessment were discussed as well as ethical aspects. The problematic nature of using organisms altered through genetic engineering in the open land, traffic and transport, site restoration, nuclear energy, and isotope applications were subjects particularly dealt with. (DG) [de

  3. Prediction of prostate cancer in unscreened men: external validation of a risk calculator.

    Science.gov (United States)

    van Vugt, Heidi A; Roobol, Monique J; Kranse, Ries; Määttänen, Liisa; Finne, Patrik; Hugosson, Jonas; Bangma, Chris H; Schröder, Fritz H; Steyerberg, Ewout W

    2011-04-01

    Prediction models need external validation to assess their value beyond the setting where the model was derived from. To assess the external validity of the European Randomized study of Screening for Prostate Cancer (ERSPC) risk calculator (www.prostatecancer-riskcalculator.com) for the probability of having a positive prostate biopsy (P(posb)). The ERSPC risk calculator was based on data of the initial screening round of the ERSPC section Rotterdam and validated in 1825 and 531 men biopsied at the initial screening round in the Finnish and Swedish sections of the ERSPC respectively. P(posb) was calculated using serum prostate specific antigen (PSA), outcome of digital rectal examination (DRE), transrectal ultrasound and ultrasound assessed prostate volume. The external validity was assessed for the presence of cancer at biopsy by calibration (agreement between observed and predicted outcomes), discrimination (separation of those with and without cancer), and decision curves (for clinical usefulness). Prostate cancer was detected in 469 men (26%) of the Finnish cohort and in 124 men (23%) of the Swedish cohort. Systematic miscalibration was present in both cohorts (mean predicted probability 34% versus 26% observed, and 29% versus 23% observed, both pscreened men, but overestimated the risk of a positive biopsy. Further research is necessary to assess the performance and applicability of the ERSPC risk calculator when a clinical setting is considered rather than a screening setting. Copyright © 2010 Elsevier Ltd. All rights reserved.

  4. Risk assessment for transport operations

    International Nuclear Information System (INIS)

    Appleton, P.R.; Miles, J.C.

    1990-01-01

    The world-wide safety of the transport of radioactive material is based on the IAEA Transport Regulations. Risk assessment can provide quantitative data to help in the demonstration, understanding and improvement of the effectiveness of the Regulations in assuring safety. In this Paper the methodology, data and computer codes necessary and available for transport risk assessment are reviewed. Notable examples of assessments carried out over the past 15 years are briefly described along with current research, and the benefits and limitations of the techniques are discussed. (author)

  5. Caries risk assessment in young adults

    DEFF Research Database (Denmark)

    Petersson, Gunnel Hänsel; Twetman, Svante

    2015-01-01

    BACKGROUND: To validate baseline caries risk classifications according to the Cariogram model with the actual caries development over a 3-year period in a group of young adults living in Sweden. METHODS: The study group consisted of 1,295 19-year-old patients that completed a comprehensive clinical...... baseline examination, including radiographs and salivary tests. An individual caries risk profile was computed and the patient was placed in one of five risk categories. After 3 years, 982 patients (75.8%) were re-examined and caries increment for each patient was calculated. The outcome was expressed...... as sensitivity, specificity and predictive values and compared with a risk assessment scheme used in Public Dental Service. RESULTS: The drop-outs displayed more risk factors and a significantly higher caries burden at baseline compared with those that remained in the project (p 

  6. Health risk assessment for program managers

    International Nuclear Information System (INIS)

    Jump, R.A.; Williamson, D.S.

    1994-01-01

    This paper presents the findings of a sensitivity analysis into the independent variables that determine the levels of health risks posed by buried plutonium and americium at a typical contaminated site in an arid region. Environmental Restoration Program Managers often must make decisions concerning cleanup levels, remediation alternatives, schedules, cost estimates, etc. based upon extraordinarily safe assumptions about risk assessment calculation inputs. This study reveals to the Program Manager which variables are major drivers to the calculated levels of risk posed by transuranic radionuclides and which ones have second order effects or less. The findings of this study should indicate which inputs should be the focus of attention during negotiations with regulators and of further empirical investigation

  7. The issue of risk dilution in risk assessments

    International Nuclear Information System (INIS)

    Wilmot, R.; Robinson, P.

    2004-01-01

    This paper explores an issue that was first highlighted more than 20 years ago during an inquiry concerning the Sizeweli B nuclear power station in the UK. In the probabilistic safety assessment for this plant, the proponent had apparently reduced its estimates of risk by admitting to increased uncertainty about the timing of certain events. This situation is counter-intuitive, since an increase in uncertainty about the factors contributing to safety would be expected to lead to less confidence and hence to greater risk. This paradoxical situation was termed 'risk dilution' and it has been a topic of interest to reviewers of safety cases since. The recent international peer review of the Yucca Mountain performance assessments concluded that there was a potential for risk dilution in the assumptions and calculations presented. The next section describes how assumptions about the timing of events and other aspects of an assessment may lead to risk dilution, and this is followed by two examples based on recent performance assessments. The final section discusses how potential problems can be identified in safety cases, and the types of response that a regulator might adopt as a result. (authors)

  8. Risk assessment and the environment

    International Nuclear Information System (INIS)

    Fisk, D.J.

    1992-01-01

    This paper reviews the use of risk assessment techniques in the field of environment protection. I will argue that in some important instances the development of environment policy has been a source of fruitful development of a risk based methodologies. In other cases the importation of risk assessment techniques has proved much more problematic. As the scope of environmental regulation increases so does the possibility of inconsistent and arbitrary solutions to problems. The need for a more systematic approach to the development of environmental regulation has never been stronger, so it is important to understand the reasons for the mixed success of risk assessment. This applies equally to those nations with long traditions of the regulation of private sector industry and those just beginning on this course. The way ahead may be to extend our ideas of how to express risk and uncertainty. Some of the recent cause celebres of environment policy show this challenge very clearly. As an example, this paper will look at the problem of assessing the risk of man-made climate change

  9. Risk assessment and the environment

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, D J [Department of the Environment (United Kingdom)

    1992-07-01

    This paper reviews the use of risk assessment techniques in the field of environment protection. I will argue that in some important instances the development of environment policy has been a source of fruitful development of a risk based methodologies. In other cases the importation of risk assessment techniques has proved much more problematic. As the scope of environmental regulation increases so does the possibility of inconsistent and arbitrary solutions to problems. The need for a more systematic approach to the development of environmental regulation has never been stronger, so it is important to understand the reasons for the mixed success of risk assessment. This applies equally to those nations with long traditions of the regulation of private sector industry and those just beginning on this course. The way ahead may be to extend our ideas of how to express risk and uncertainty. Some of the recent cause celebres of environment policy show this challenge very clearly. As an example, this paper will look at the problem of assessing the risk of man-made climate change.

  10. Assessing Your Weight and Health Risk

    Science.gov (United States)

    ... Health Professional Resources Assessing Your Weight and Health Risk Assessment of weight and health risk involves using ... risk for developing obesity-associated diseases or conditions. Risk Factors for Health Topics Associated With Obesity Along ...

  11. Mixtures and their risk assessment in toxicology.

    Science.gov (United States)

    Mumtaz, Moiz M; Hansen, Hugh; Pohl, Hana R

    2011-01-01

    For communities generally and for persons living in the vicinity of waste sites specifically, potential exposures to chemical mixtures are genuine concerns. Such concerns often arise from perceptions of a site's higher than anticipated toxicity due to synergistic interactions among chemicals. This chapter outlines some historical approaches to mixtures risk assessment. It also outlines ATSDR's current approach to toxicity risk assessment. The ATSDR's joint toxicity assessment guidance for chemical mixtures addresses interactions among components of chemical mixtures. The guidance recommends a series of steps that include simple calculations for a systematic analysis of data leading to conclusions regarding any hazards chemical mixtures might pose. These conclusions can, in turn, lead to recommendations such as targeted research to fill data gaps, development of new methods using current science, and health education to raise awareness of residents and health care providers. The chapter also provides examples of future trends in chemical mixtures assessment.

  12. Aspects regarding explosion risk assessment

    Directory of Open Access Journals (Sweden)

    Părăian Mihaela

    2017-01-01

    Full Text Available Explosive risk occurs in all activities involving flammable substances in the form of gases, vapors, mists or dusts which, in mixture with air, can generate an explosive atmosphere. As explosions can cause human losses and huge material damage, the assessment of the explosion risk and the establishment of appropriate measures to reduce it to acceptable levels according to the standards and standards in force is of particular importance for the safety and health of people and goods.There is no yet a recognized method of assessing the explosion risk, but regardless of the applied method, the likelihood of an explosive atmosphere occurrence has to be determined, together with the occurrence of an efficient ignition source and the magnitude of foreseeable consequences. In assessment processes, consequences analysis has a secondary importance since it’s likely that explosions would always involve considerable damage, starting from important material damages and up to human damages that could lead to death.The purpose of the work is to highlight the important principles and elements to be taken into account for a specific risk assessment. An essential element in assessing the risk of explosion in workplaces where explosive atmospheres may occur is technical installations and personal protective equipment (PPE that must be designed, manufactured, installed and maintained so that they cannot generate a source of ignition. Explosion prevention and protection requirements are governed by specific norms and standards, and a main part of the explosion risk assessment is related to the assessment of the compliance of the equipment / installation with these requirements.

  13. Risk assessment and nuclear power

    International Nuclear Information System (INIS)

    Bodansky, D.

    1982-01-01

    The range of risk perceptions involving nuclear power is so great that there is little hope of bridging extreme positions, but a consensus based upon reasoned discussion among uncommitted people could determine a sensible path. Our concerns over the uncertainties of risk assessment have made it increasingly difficult to make responsible decisions fast enough to deal with modern needs. The result is an immobility in energy matters that can point to a 2% reduction in oil use as its only triumph. The risk of nuclear war as a result of military action over energy issues suggests to some that the solution is to abolish nuclear power (however impractical) and to others that a rapid spread of nuclear power will eliminate energy as an incentive for war. If nuclear war is the major risk to consider, risk assessments need to include the risks of war, as well as those of carbon dioxide buildup and socio-economic disruptions, all of which loom larger than the risks of nuclear-plant accidents. Energy choices should be aimed at diminishing these major risks, even if they include the use of nuclear power. 26 references

  14. Sudden Cardiac Arrest (SCA) Risk Assessment

    Science.gov (United States)

    ... HRS Find a Specialist Share Twitter Facebook SCA Risk Assessment Sudden Cardiac Arrest (SCA) occurs abruptly and without ... people of all ages and health conditions. Start Risk Assessment The Sudden Cardiac Arrest (SCA) Risk Assessment Tool ...

  15. The risk of major nuclear accident: calculation and perception of probabilities

    International Nuclear Information System (INIS)

    Leveque, Francois

    2013-01-01

    Whereas before the Fukushima accident, already eight major accidents occurred in nuclear power plants, a number which is higher than that expected by experts and rather close to that corresponding of people perception of risk, the author discusses how to understand these differences and reconcile observations, objective probability of accidents and subjective assessment of risks, why experts have been over-optimistic, whether public opinion is irrational regarding nuclear risk, and how to measure risk and its perception. Thus, he addresses and discusses the following issues: risk calculation (cost, calculated frequency of major accident, bias between the number of observed accidents and model predictions), perceived probabilities and aversion for disasters (perception biases of probability, perception biases unfavourable to nuclear), the Bayes contribution and its application (Bayes-Laplace law, statistics, choice of an a priori probability, prediction of the next event, probability of a core fusion tomorrow)

  16. Human reliability assessment and probabilistic risk assessment

    International Nuclear Information System (INIS)

    Embrey, D.E.; Lucas, D.A.

    1989-01-01

    Human reliability assessment (HRA) is used within Probabilistic Risk Assessment (PRA) to identify the human errors (both omission and commission) which have a significant effect on the overall safety of the system and to quantify the probability of their occurrence. There exist a variey of HRA techniques and the selection of an appropriate one is often difficult. This paper reviews a number of available HRA techniques and discusses their strengths and weaknesses. The techniques reviewed include: decompositional methods, time-reliability curves and systematic expert judgement techniques. (orig.)

  17. Judicial aspects in risk assessment

    International Nuclear Information System (INIS)

    Lukes, R.

    1977-01-01

    Decisions of administrative authorities concerning the permission to use fissile material contain a prognosis about the probability of damage which may be caused by using this material. The judicial criteria used in order to determine the probability of such a damage occurring can be improved by risk analysis. This will not, of course, reduce administrative decisions to simple 'yes-or-no decisions', but the calculation of probabilities will gain more exactness. (orig.) [de

  18. Extended probabilistic system assessment calculations within the SKI project-90

    International Nuclear Information System (INIS)

    Pereira, A.

    1993-03-01

    The probabilistic system assessment calculation reported in the SKI Project-90 final documents were restricted to the following nuclides: 14 C, 129 I, 135 Cs, 237 Np and 240 Pu. In this report we have extended those calculations to another five nuclides: 79 Se, 243 Am, 240 Pu, 93 Zr and 99 Tc. The execution of probabilistic assessment calculations integrated in the context of SKIs first safety analysis exercise of an hypothetic final repository for high-level nuclear waste in Sweden, was a learning experience of relevance for the conduction of probabilistic safety assessment in future exercises. Some major conclusions and viewpoints of future need related with probabilistic assessment were withdrawn from this work and are presented in our report

  19. Environmental Risk Assessment of Nanomaterials

    Science.gov (United States)

    Bayramov, A. A.

    In this paper, various aspects of modern nanotechnologies and, as a result, risks of nanomaterials impact on an environment are considered. This very brief review of the First International Conference on Material and Information Sciences in High Technologies (2007, Baku, Azerbaijan) is given. The conference presented many reports that were devoted to nanotechnology in biology and business for the developing World, formation of charged nanoparticles for creation of functional nanostructures, nanoprocessing of carbon nanotubes, magnetic and optical properties of manganese-phosphorus nanowires, ultra-nanocrystalline diamond films, and nanophotonics communications in Azerbaijan. The mathematical methods of simulation of the group, individual and social risks are considered for the purpose of nanomaterials risk reduction and remediation. Lastly, we have conducted studies at a plant of polymeric materials (and nanomaterials), located near Baku. Assessments have been conducted on the individual risk of person affection and constructed the map of equal isolines and zones of individual risk for a plant of polymeric materials (and nanomaterials).

  20. Approximate dynamic fault tree calculations for modelling water supply risks

    International Nuclear Information System (INIS)

    Lindhe, Andreas; Norberg, Tommy; Rosén, Lars

    2012-01-01

    Traditional fault tree analysis is not always sufficient when analysing complex systems. To overcome the limitations dynamic fault tree (DFT) analysis is suggested in the literature as well as different approaches for how to solve DFTs. For added value in fault tree analysis, approximate DFT calculations based on a Markovian approach are presented and evaluated here. The approximate DFT calculations are performed using standard Monte Carlo simulations and do not require simulations of the full Markov models, which simplifies model building and in particular calculations. It is shown how to extend the calculations of the traditional OR- and AND-gates, so that information is available on the failure probability, the failure rate and the mean downtime at all levels in the fault tree. Two additional logic gates are presented that make it possible to model a system's ability to compensate for failures. This work was initiated to enable correct analyses of water supply risks. Drinking water systems are typically complex with an inherent ability to compensate for failures that is not easily modelled using traditional logic gates. The approximate DFT calculations are compared to results from simulations of the corresponding Markov models for three water supply examples. For the traditional OR- and AND-gates, and one gate modelling compensation, the errors in the results are small. For the other gate modelling compensation, the error increases with the number of compensating components. The errors are, however, in most cases acceptable with respect to uncertainties in input data. The approximate DFT calculations improve the capabilities of fault tree analysis of drinking water systems since they provide additional and important information and are simple and practically applicable.

  1. Probabilistic risk assessment: Number 219

    International Nuclear Information System (INIS)

    Bari, R.A.

    1985-01-01

    This report describes a methodology for analyzing the safety of nuclear power plants. A historical overview of plants in the US is provided, and past, present, and future nuclear safety and risk assessment are discussed. A primer on nuclear power plants is provided with a discussion of pressurized water reactors (PWR) and boiling water reactors (BWR) and their operation and containment. Probabilistic Risk Assessment (PRA), utilizing both event-tree and fault-tree analysis, is discussed as a tool in reactor safety, decision making, and communications. (FI)

  2. Risk assessment using probabilistic standards

    International Nuclear Information System (INIS)

    Avila, R.

    2004-01-01

    A core element of risk is uncertainty represented by plural outcomes and their likelihood. No risk exists if the future outcome is uniquely known and hence guaranteed. The probability that we will die some day is equal to 1, so there would be no fatal risk if sufficiently long time frame is assumed. Equally, rain risk does not exist if there was 100% assurance of rain tomorrow, although there would be other risks induced by the rain. In a formal sense, any risk exists if, and only if, more than one outcome is expected at a future time interval. In any practical risk assessment we have to deal with uncertainties associated with the possible outcomes. One way of dealing with the uncertainties is to be conservative in the assessments. For example, we may compare the maximal exposure to a radionuclide with a conservatively chosen reference value. In this case, if the exposure is below the reference value then it is possible to assure that the risk is low. Since single values are usually compared; this approach is commonly called 'deterministic'. Its main advantage lies in the simplicity and in that it requires minimum information. However, problems arise when the reference values are actually exceeded or might be exceeded, as in the case of potential exposures, and when the costs for realizing the reference values are high. In those cases, the lack of knowledge on the degree of conservatism involved impairs a rational weighing of the risks against other interests. In this presentation we will outline an approach for dealing with uncertainties that in our opinion is more consistent. We will call it a 'fully probabilistic risk assessment'. The essence of this approach consists in measuring the risk in terms of probabilities, where the later are obtained from comparison of two probabilistic distributions, one reflecting the uncertainties in the outcomes and one reflecting the uncertainties in the reference value (standard) used for defining adverse outcomes. Our first aim

  3. On-site worker-risk calculations using MACCS

    International Nuclear Information System (INIS)

    Peterson, V.L.

    1993-01-01

    We have revised the latest version of MACCS for use with the calculation of doses and health risks to on-site workers for postulated accidents at the Rocky Flats Plant (RFP) in Colorado. The modifications fall into two areas: (1) an improved estimate of shielding offered by buildings to workers that remain indoors; and, (2) an improved treatment of building-wake effects, which affects both indoor and outdoor workers. Because the postulated accident can be anywhere on plant site, user-friendly software has been developed to create those portions of the (revised) MACCS input data files that are specific to the accident site

  4. Dynamical systems probabilistic risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Denman, Matthew R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ames, Arlo Leroy [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-03-01

    Probabilistic Risk Assessment (PRA) is the primary tool used to risk-inform nuclear power regulatory and licensing activities. Risk-informed regulations are intended to reduce inherent conservatism in regulatory metrics (e.g., allowable operating conditions and technical specifications) which are built into the regulatory framework by quantifying both the total risk profile as well as the change in the risk profile caused by an event or action (e.g., in-service inspection procedures or power uprates). Dynamical Systems (DS) analysis has been used to understand unintended time-dependent feedbacks in both industrial and organizational settings. In dynamical systems analysis, feedback loops can be characterized and studied as a function of time to describe the changes to the reliability of plant Structures, Systems and Components (SSCs). While DS has been used in many subject areas, some even within the PRA community, it has not been applied toward creating long-time horizon, dynamic PRAs (with time scales ranging between days and decades depending upon the analysis). Understanding slowly developing dynamic effects, such as wear-out, on SSC reliabilities may be instrumental in ensuring a safely and reliably operating nuclear fleet. Improving the estimation of a plant's continuously changing risk profile will allow for more meaningful risk insights, greater stakeholder confidence in risk insights, and increased operational flexibility.

  5. Probabilistic risk assessment as an aid to risk management

    International Nuclear Information System (INIS)

    Garrick, B.J.

    1982-01-01

    Probabilistic risk assessments are providing important insights into nuclear power plant safety. Their value is two-fold: first as a means of quantifying nuclear plant risk including contributors to risk, and second as an aid to risk management. A risk assessment provides an analytical plant model that can be the basis for performing meaningful decision analyses for controlling safety. It is the aspect of quantitative risk management that makes probabilistic risk assessment an important technical discipline of the future

  6. Methodology for technical risk assessment

    International Nuclear Information System (INIS)

    Waganer, L.M.; Zuckerman, D.S.

    1983-01-01

    A methodology has been developed for and applied to the assessment of the technical risks associated with an evolving technology. This methodology, originally developed for fusion by K. W. Billman and F. R. Scott at EPRI, has been applied to assess the technical risk of a fuel system for a fusion reactor. Technical risk is defined as the risk that a particular technology or component which is currently under development will not achieve a set of required technical specifications (i.e. probability of failure). The individual steps in the technical risk assessment are summarized. The first step in this methodology is to clearly and completely quantify the technical requirements for the particular system being examined. The next step is to identify and define subsystems and various options which appear capable of achieving the required technical performance. The subsystem options are then characterized regarding subsystem functions, interface requirements with the subsystems and systems, important components, developmental obstacles and technical limitations. Key technical subsystem performance parameters are identified which directly or indirectly relate to the system technical specifications. Past, existing and future technical performance data from subsystem experts are obtained by using a Bayesian Interrogation technique. The input data is solicited in the form of probability functions. Thus the output performance of the system is expressed as probability functions

  7. Ecological risk assessment: Lessons learned?

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This conference was held November 14--18, 1993 in Houston, Texas for the purpose of providing a forum for exchange of state-of-the-art information on ecological risk assessment. This book is comprised of the abstracts of the presentations at this symposium. Individual abstracts have been processed separately for inclusion in the appropriate data bases

  8. Where You Live: Risk Assessment

    Science.gov (United States)

    Where you live page shows visitors to the risk assessment website how to contact their local regional office by state. Since these link to pages maintained by the local offices they will have the most up-to-date contact information.

  9. An approach to risk assessment

    DEFF Research Database (Denmark)

    Simonsen, L.; Lund, S. P.; Hass, Ulla

    1998-01-01

    of Ministers with the task to propose criteria for neurotoxicity. Functional effects on the nervous system, such as reduction in memory and learning ability, decrease in attention, and alteration of behavior due to toxic chemicals in the environment is now being acknowledged as an important public health...... indicate that numerous persons are exposed in the working as well as in the general environment to several chemicals, for which almost no data on the effect on subtle neurophysiological functions are available. Development of an approach to risk assessment dealing with this problem is a major challenge...... in the nineties. Different approaches to risk assessment are discussed, the quality of the databases available for hazard assessment are evaluated, and the needs for further research are identified. (C) 1996 Intox Press, Inc....

  10. 24 CFR 35.315 - Risk assessment.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Risk assessment. 35.315 Section 35... Provided by a Federal Agency Other Than HUD § 35.315 Risk assessment. Each owner shall complete a risk assessment in accordance with 40 CFR 745.227(d). Each risk assessment shall be completed in accordance with...

  11. A source term and risk calculations using level 2+PSA methodology

    International Nuclear Information System (INIS)

    Park, S. I.; Jea, M. S.; Jeon, K. D.

    2002-01-01

    The scope of Level 2+ PSA includes the assessment of dose risk which is associated with the exposures of the radioactive nuclides escaping from nuclear power plants during severe accidents. The establishment of data base for the exposure dose in Korea nuclear power plants may contribute to preparing the accident management programs and periodic safety reviews. In this study the ORIGEN, MELCOR and MACCS code were employed to produce a integrated framework to assess the radiation source term risk. The framework was applied to a reference plant. Using IPE results, the dose rate for the reference plant was calculated quantitatively

  12. Risk assessment of radiation carcinogenesis

    International Nuclear Information System (INIS)

    Kai, Michiaki

    2012-01-01

    This commentary describes the radiation cancer risk assessed by international organizations other than ICRP, assessed for radon and for internal exposure, in the series from the aspect of radiation protection of explaining the assessments done until ICRP Pub. 103. Statistic significant increase of cancer formation is proved at higher doses than 100-200 mSv. At lower doses, with use of mathematical model, United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) reported the death probability due to the excess lifetime risk (ELR) at 100 mSv of 0.36-0.77% for solid tumors and 0.03-0.05% for leukemia, and NRC in US, the risk of exposure-induced prevalence and death (REID) per 100 thousands persons of 800 (male)/1,310 (female) and 410/610, respectively. Both are essentially based on findings in A-bomb survivors. The assessment for Rn is described here not on dose. UK and US analyses of pooled raw data in case control studies revealed the significant increase of lung cancer formation at as low level as 100 Bq Rn/m3. Their analyses also showed the significance of smoking, which had been realized as a confounding factor in risk analysis of Rn for uranium miners. The death probability until the age of 85 y was found to be 1.2 x 10 -4 in non-smokers and 24 x 10 -4 in smokers/ Working Level Month (WLM). Increased thyroid cancer incidence has been known in Chernobyl Accident, which is realized as a result of internal exposure of radioiodine; however, the relationship between the internal dose to thyroid and its cancer prevalence resembles that in the case of external exposure. There is no certain evidence against the concept that risk of internal exposure is similar to and/or lower than, the external one although assessment of the internal exposure risk accompanies uncertainty depending on the used model and ingested dose. International Commission on Radiological Protection (ICRP) recommendations hitherto have been important and precious despite

  13. Heuristics structure and pervade formal risk assessment.

    Science.gov (United States)

    MacGillivray, Brian H

    2014-04-01

    Lay perceptions of risk appear rooted more in heuristics than in reason. A major concern of the risk regulation literature is that such "error-strewn" perceptions may be replicated in policy, as governments respond to the (mis)fears of the citizenry. This has led many to advocate a relatively technocratic approach to regulating risk, characterized by high reliance on formal risk and cost-benefit analysis. However, through two studies of chemicals regulation, we show that the formal assessment of risk is pervaded by its own set of heuristics. These include rules to categorize potential threats, define what constitutes valid data, guide causal inference, and to select and apply formal models. Some of these heuristics lay claim to theoretical or empirical justifications, others are more back-of-the-envelope calculations, while still more purport not to reflect some truth but simply to constrain discretion or perform a desk-clearing function. These heuristics can be understood as a way of authenticating or formalizing risk assessment as a scientific practice, representing a series of rules for bounding problems, collecting data, and interpreting evidence (a methodology). Heuristics are indispensable elements of induction. And so they are not problematic per se, but they can become so when treated as laws rather than as contingent and provisional rules. Pitfalls include the potential for systematic error, masking uncertainties, strategic manipulation, and entrenchment. Our central claim is that by studying the rules of risk assessment qua rules, we develop a novel representation of the methods, conventions, and biases of the prior art. © 2013 Society for Risk Analysis.

  14. Performance assessment - risk assessment vive la differences

    International Nuclear Information System (INIS)

    Nitschke, R.L.

    1997-01-01

    In the sister worlds of radioactive waste management disposal and environmental restoration, there are two similar processes and computational approaches for determining the acceptability of the proposed activities. While similar, these two techniques can lead to confusion and misunderstanding if the differences are not recognized and appreciated. In the case of radioactive waste management, the performance assessment process is used to determine compliance with certain prescribed 'performance objectives'. These objectives are designed to ensure that the disposal of radioactive (high-level, low-level, and/or transuranic) waste will be protective of human health and the environment. The environmental link is primarily through assuring protection of the groundwater as a resource. In the case of environmental restoration, the risk assessment process is used to determine the proper remedial action response, if any, for a past hazardous waste release. The process compares the 'no action' or 'leave as is' option with both carcinogenic and noncarcinogenic values for human health to determine the need for any action and to help to help determine just what the appropriate action would need to be. The impacts to the ecological system are evaluated in a slightly, different but similar fashion. Now the common objectives between these two processes notwithstanding. There are some key and fundamental differences that need to be answered that make direct comparisons or a common approach inappropriate. Failure to recognize this can lead to confusion and misunderstanding. This can be particularly problematic when one is faced with an active disposal facility located within the boundaries of an environmental restoration site as is the case at the Idaho National Engineering Laboratory (INEL). Through a critical evaluation of the performance assessment and risk assessment processes, highlighting both similarities and differences, it is hoped that greater understanding and appreciation

  15. The ACS NSQIP Risk Calculator Is a Fair Predictor of Acute Periprosthetic Joint Infection.

    Science.gov (United States)

    Wingert, Nathaniel C; Gotoff, James; Parrilla, Edgardo; Gotoff, Robert; Hou, Laura; Ghanem, Elie

    2016-07-01

    Periprosthetic joint infection (PJI) is a severe complication from the patient's perspective and an expensive one in a value-driven healthcare model. Risk stratification can help identify those patients who may have risk factors for complications that can be mitigated in advance of elective surgery. Although numerous surgical risk calculators have been created, their accuracy in predicting outcomes, specifically PJI, has not been tested. (1) How accurate is the American College of Surgeons National Surgical Quality Improvement Program (ACS NSQIP) Surgical Site Infection Calculator in predicting 30-day postoperative infection? (2) How accurate is the calculator in predicting 90-day postoperative infection? We isolated 1536 patients who underwent 1620 primary THAs and TKAs at our institution during 2011 to 2013. Minimum followup was 90 days. The ACS NSQIP Surgical Risk Calculator was assessed in its ability to predict acute PJI within 30 and 90 days postoperatively. Patients who underwent a repeat surgical procedure within 90 days of the index arthroplasty and in whom at least one positive intraoperative culture was obtained at time of reoperation were considered to have PJI. A total of 19 cases of PJI were identified, including 11 at 30 days and an additional eight instances by 90 days postoperatively. Patient-specific risk probabilities for PJI based on demographics and comorbidities were recorded from the ACS NSQIP Surgical Risk Calculator website. The area under the curve (AUC) for receiver operating characteristic (ROC) curves was calculated to determine the predictability of the risk probability for PJI. The AUC is an effective method for quantifying the discriminatory capacity of a diagnostic test to correctly classify patients with and without infection in which it is defined as excellent (AUC 0.9-1), good (AUC 0.8-0.89), fair (AUC 0.7-0.79), poor (AUC 0.6-0.69), or fail/no discriminatory capacity (AUC 0.5-0.59). A p value of fair accuracy in predicting 30

  16. RELEVANCE OF PROCESS RISK ASSESSMENT IN AIRLINES

    OpenAIRE

    Oksana G. Feoktistova; Igor K. Turkin; Sergey V. Barinov

    2017-01-01

    The notion of “the concept on assumed risk” that took over from the outdated concept of absolute security is analyzed, the increasing significance of operating risk assessment at the present stage is noted. Some basic risk assessment techniques are considered. Matrix technique of risk assessment is considered more thoroughly, and it may be used in risk assessment of airlines in the context of labour protection management system.The ability to correctly assess risks and develop appropriate pre...

  17. Risk assessment and societal choices

    Energy Technology Data Exchange (ETDEWEB)

    Otway, H J

    1975-02-15

    Many countries are experiencing a period in which traditional values are being questioned; plans for further technological progress are being met by a variety of demands for a closer examination of the benefits and risks of large-scale technologies. In this paper the concepts of risk assessment are presented and a model is proposed which illustrates the importance of socio-psychological mechanisms in the acceptance of technological risks. The research plan of the Joint IAEA/IIASA Research Project is outlined: this work is directed toward gaining an improved understanding of how societies judge the acceptability of technologies and how societal attitudes and anticipated responses may be better integrated into the decision-making process. Some preliminary results are reported. (author)

  18. Risk assessment and societal choices

    International Nuclear Information System (INIS)

    Otway, H.J.

    1975-01-01

    Many countries are experiencing a period in which traditional values are being questioned; plans for further technological progress are being met by a variety of demands for a closer examination of the benefits and risks of large-scale technologies. In this paper the concepts of risk assessment are presented and a model is proposed which illustrates the importance of socio-psychological mechanisms in the acceptance of technological risks. The research plan of the Joint IAEA/IIASA Research Project is outlined: this work is directed toward gaining an improved understanding of how societies judge the acceptability of technologies and how societal attitudes and anticipated responses may be better integrated into the decision-making process. Some preliminary results are reported. (author)

  19. Supplemental Hazard Analysis and Risk Assessment - Hydrotreater

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, Peter P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wagner, Katie A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-04-01

    A supplemental hazard analysis was conducted and quantitative risk assessment performed in response to an independent review comment received by the Pacific Northwest National Laboratory (PNNL) from the U.S. Department of Energy Pacific Northwest Field Office (PNSO) against the Hydrotreater/Distillation Column Hazard Analysis Report issued in April 2013. The supplemental analysis used the hazardous conditions documented by the previous April 2013 report as a basis. The conditions were screened and grouped for the purpose of identifying whether additional prudent, practical hazard controls could be identified, using a quantitative risk evaluation to assess the adequacy of the controls and establish a lower level of concern for the likelihood of potential serious accidents. Calculations were performed to support conclusions where necessary.

  20. System Analysis and Risk Assessment (SARA) system

    International Nuclear Information System (INIS)

    Krantz, E.A.; Russell, K.D.; Stewart, H.D.; Van Siclen, V.S.

    1986-01-01

    Utilization of Probabilistic Risk Assessment (PRA) related information in the day-to-day operation of plant systems has, in the past, been impracticable due to the size of the computers needed to run PRA codes. This paper discusses a microcomputer-based database system which can greatly enhance the capability of operators or regulators to incorporate PRA methodologies into their routine decision making. This system is called the System Analysis and Risk Assessment (SARA) system. SARA was developed by EG and G Idaho, Inc. at the Idaho National Engineering Laboratory to facilitate the study of frequency and consequence analyses of accident sequences from a large number of light water reactors (LWRs) in this country. This information is being amassed by several studies sponsored by the United States Nuclear Regulatory Commission (USNRC). To meet the need of portability and accessibility, and to perform the variety of calculations necessary, it was felt that a microcomputer-based system would be most suitable

  1. Probabilistic risk assessment of HTGRs

    International Nuclear Information System (INIS)

    Fleming, K.N.; Houghton, W.J.; Hannaman, G.W.; Joksimovic, V.

    1980-08-01

    Probabilistic Risk Assessment methods have been applied to gas-cooled reactors for more than a decade and to HTGRs for more than six years in the programs sponsored by the US Department of Energy. Significant advancements to the development of PRA methodology in these programs are summarized as are the specific applications of the methods to HTGRs. Emphasis here is on PRA as a tool for evaluating HTGR design options. Current work and future directions are also discussed

  2. Probabilistic risk assessment of HTGRs

    International Nuclear Information System (INIS)

    Fleming, K.N.; Houghton, W.J.; Hannaman, G.W.; Joksimovic, V.

    1981-01-01

    Probabilistic Risk Assessment methods have been applied to gas-cooled reactors for more than a decade and to HTGRs for more than six years in the programs sponsored by the U.S. Department of Energy. Significant advancements to the development of PRA methodology in these programs are summarized as are the specific applications of the methods to HTGRs. Emphasis here is on PRA as a tool for evaluating HTGR design options. Current work and future directions are also discussed. (author)

  3. Risk Assessment of Shellfish Toxins

    Directory of Open Access Journals (Sweden)

    Rex Munday

    2013-11-01

    Full Text Available Complex secondary metabolites, some of which are highly toxic to mammals, are produced by many marine organisms. Some of these organisms are important food sources for marine animals and, when ingested, the toxins that they produce may be absorbed and stored in the tissues of the predators, which then become toxic to animals higher up the food chain. This is a particular problem with shellfish, and many cases of poisoning are reported in shellfish consumers each year. At present, there is no practicable means of preventing uptake of the toxins by shellfish or of removing them after harvesting. Assessment of the risk posed by such toxins is therefore required in order to determine levels that are unlikely to cause adverse effects in humans and to permit the establishment of regulatory limits in shellfish for human consumption. In the present review, the basic principles of risk assessment are described, and the progress made toward robust risk assessment of seafood toxins is discussed. While good progress has been made, it is clear that further toxicological studies are required before this goal is fully achieved.

  4. Uncertainties in risk assessment at USDOE facilities

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, L.D.; Holtzman, S.; Meinhold, A.F.; Morris, S.C.; Rowe, M.D.

    1994-01-01

    The United States Department of Energy (USDOE) has embarked on an ambitious program to remediate environmental contamination at its facilities. Decisions concerning cleanup goals, choices among cleanup technologies, and funding prioritization should be largely risk-based. Risk assessments will be used more extensively by the USDOE in the future. USDOE needs to develop and refine risk assessment methods and fund research to reduce major sources of uncertainty in risk assessments at USDOE facilities. The terms{open_quote} risk assessment{close_quote} and{open_quote} risk management{close_quote} are frequently confused. The National Research Council (1983) and the United States Environmental Protection Agency (USEPA, 1991a) described risk assessment as a scientific process that contributes to risk management. Risk assessment is the process of collecting, analyzing and integrating data and information to identify hazards, assess exposures and dose responses, and characterize risks. Risk characterization must include a clear presentation of {open_quotes}... the most significant data and uncertainties...{close_quotes} in an assessment. Significant data and uncertainties are {open_quotes}...those that define and explain the main risk conclusions{close_quotes}. Risk management integrates risk assessment information with other considerations, such as risk perceptions, socioeconomic and political factors, and statutes, to make and justify decisions. Risk assessments, as scientific processes, should be made independently of the other aspects of risk management (USEPA, 1991a), but current methods for assessing health risks are based on conservative regulatory principles, causing unnecessary public concern and misallocation of funds for remediation.

  5. Uncertainties in risk assessment at USDOE facilities

    International Nuclear Information System (INIS)

    Hamilton, L.D.; Holtzman, S.; Meinhold, A.F.; Morris, S.C.; Rowe, M.D.

    1994-01-01

    The United States Department of Energy (USDOE) has embarked on an ambitious program to remediate environmental contamination at its facilities. Decisions concerning cleanup goals, choices among cleanup technologies, and funding prioritization should be largely risk-based. Risk assessments will be used more extensively by the USDOE in the future. USDOE needs to develop and refine risk assessment methods and fund research to reduce major sources of uncertainty in risk assessments at USDOE facilities. The terms open-quote risk assessment close-quote and open-quote risk management close-quote are frequently confused. The National Research Council (1983) and the United States Environmental Protection Agency (USEPA, 1991a) described risk assessment as a scientific process that contributes to risk management. Risk assessment is the process of collecting, analyzing and integrating data and information to identify hazards, assess exposures and dose responses, and characterize risks. Risk characterization must include a clear presentation of open-quotes... the most significant data and uncertainties...close quotes in an assessment. Significant data and uncertainties are open-quotes...those that define and explain the main risk conclusionsclose quotes. Risk management integrates risk assessment information with other considerations, such as risk perceptions, socioeconomic and political factors, and statutes, to make and justify decisions. Risk assessments, as scientific processes, should be made independently of the other aspects of risk management (USEPA, 1991a), but current methods for assessing health risks are based on conservative regulatory principles, causing unnecessary public concern and misallocation of funds for remediation

  6. Microbiological risk assessment for personal care products.

    Science.gov (United States)

    Stewart, S E; Parker, M D; Amézquita, A; Pitt, T L

    2016-12-01

    Regulatory decisions regarding microbiological safety of cosmetics and personal care products are primarily hazard-based, where the presence of a potential pathogen determines decision-making. This contrasts with the Food industry where it is a commonplace to use a risk-based approach for ensuring microbiological safety. A risk-based approach allows consideration of the degree of exposure to assess unacceptable health risks. As there can be a number of advantages in using a risk-based approach to safety, this study explores the Codex Alimentarius (Codex) four-step Microbiological Risk Assessment (MRA) framework frequently used in the Food industry and examines how it can be applied to the safety assessment of personal care products. The hazard identification and hazard characterization steps (one and two) of the Codex MRA framework consider the main microorganisms of concern. These are addressed by reviewing the current industry guidelines for objectionable organisms and analysing reports of contaminated products notified by government agencies over a recent 5-year period, together with examples of reported outbreaks. Data related to estimation of exposure (step three) are discussed, and examples of possible calculations and references are included. The fourth step, performed by the risk assessor (risk characterization), is specific to each assessment and brings together the information from the first three steps to assess the risk. Although there are very few documented uses of the MRA approach for personal care products, this study illustrates that it is a practicable and sound approach for producing products that are safe by design. It can be helpful in the context of designing products and processes going to market and with setting of microbiological specifications. Additionally, it can be applied reactively to facilitate decision-making when contaminated products are released on to the marketplace. Currently, the knowledge available may only allow a

  7. Quadrant III RFI draft report: Appendix J, Baseline risk assessment

    International Nuclear Information System (INIS)

    1992-12-01

    In accordance with the Risk Assessment Guidance for Superfund (U. S.EPA 1989), which states that background risk should be calculated separately from site-related risk in order to provide important information to the risk manager, this appendix assesses the human health risks associated with background levels of naturally occurring compounds in soil at the Portsmouth Gaseous Diffusion Plant (PORTS). This appendix is organized as follows: Background Conditions, in which the results of Geraghty ampersand Miller's work on characterizing background levels of naturally occurring compounds in soils is summarized; Identification of Exposure Pathways; Estimation of Environmental Concentrations; Estimation of Human Intake; Toxicity Assessment, and Risk Characterization, in which numerical estimates of carcinogenic and noncarcinogenic risk are calculated for each naturally occurring compound and potential exposure pathway

  8. Preliminar calculation of tornado risk in the site of Ipero

    Energy Technology Data Exchange (ETDEWEB)

    Pacheco, Rafael R.; Costa, Saulo Barros, E-mail: rafael.rade@ctmsp.mar.mil.br, E-mail: saulo.costa@ctmsp.mar.mil.br [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), Sao Paulo, SP (Brazil); Andrade, Delvonei A., E-mail: delvonei@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    General Design Criterion (GDC) 2 to 10 CFR 50 requires that 'structures, systems, and components that are important to safety shall be designed to withstand the effects of natural phenomena, such as tornadoes, without loss of capability to perform their safety functions'. According to Regulatory Guide 1.76, the design-basis intensity of a tornado for a nuclear power plant shall not exceed the intensity of the strongest tornado that occurs with the frequency of 10-7/years. Reinforcing the plant to achieve this goal represents a high increase in the costs of the project, and correspondently increase in the time required to have it commissioned. This way, the right definition of tornado risk in a site would represent savings in money for the project and in time for the licensing of a nuclear power plants. This works aims to establish a preliminary calculation of the tornado risk in the site of Ipero, where will work LABGENE from Brazilian Navy, and RMB from CNEN. (author)

  9. Mobile application-based Seoul National University Prostate Cancer Risk Calculator: development, validation, and comparative analysis with two Western risk calculators in Korean men.

    Directory of Open Access Journals (Sweden)

    Chang Wook Jeong

    Full Text Available OBJECTIVES: We developed a mobile application-based Seoul National University Prostate Cancer Risk Calculator (SNUPC-RC that predicts the probability of prostate cancer (PC at the initial prostate biopsy in a Korean cohort. Additionally, the application was validated and subjected to head-to-head comparisons with internet-based Western risk calculators in a validation cohort. Here, we describe its development and validation. PATIENTS AND METHODS: As a retrospective study, consecutive men who underwent initial prostate biopsy with more than 12 cores at a tertiary center were included. In the development stage, 3,482 cases from May 2003 through November 2010 were analyzed. Clinical variables were evaluated, and the final prediction model was developed using the logistic regression model. In the validation stage, 1,112 cases from December 2010 through June 2012 were used. SNUPC-RC was compared with the European Randomized Study of Screening for PC Risk Calculator (ERSPC-RC and the Prostate Cancer Prevention Trial Risk Calculator (PCPT-RC. The predictive accuracy was assessed using the area under the receiver operating characteristic curve (AUC. The clinical value was evaluated using decision curve analysis. RESULTS: PC was diagnosed in 1,240 (35.6% and 417 (37.5% men in the development and validation cohorts, respectively. Age, prostate-specific antigen level, prostate size, and abnormality on digital rectal examination or transrectal ultrasonography were significant factors of PC and were included in the final model. The predictive accuracy in the development cohort was 0.786. In the validation cohort, AUC was significantly higher for the SNUPC-RC (0.811 than for ERSPC-RC (0.768, p<0.001 and PCPT-RC (0.704, p<0.001. Decision curve analysis also showed higher net benefits with SNUPC-RC than with the other calculators. CONCLUSIONS: SNUPC-RC has a higher predictive accuracy and clinical benefit than Western risk calculators. Furthermore, it is easy

  10. Tsunami risk assessments in Messina, Sicily - Italy

    Science.gov (United States)

    Grezio, A.; Gasparini, P.; Marzocchi, W.; Patera, A.; Tinti, S.

    2012-01-01

    We present a first detailed tsunami risk assessment for the city of Messina where one of the most destructive tsunami inundations of the last centuries occurred in 1908. In the tsunami hazard evaluation, probabilities are calculated through a new general modular Bayesian tool for Probability Tsunami Hazard Assessment. The estimation of losses of persons and buildings takes into account data collected directly or supplied by: (i) the Italian National Institute of Statistics that provides information on the population, on buildings and on many relevant social aspects; (ii) the Italian National Territory Agency that provides updated economic values of the buildings on the basis of their typology (residential, commercial, industrial) and location (streets); and (iii) the Train and Port Authorities. For human beings, a factor of time exposition is introduced and calculated in terms of hours per day in different places (private and public) and in terms of seasons, considering that some factors like the number of tourists can vary by one order of magnitude from January to August. Since the tsunami risk is a function of the run-up levels along the coast, a variable tsunami risk zone is defined as the area along the Messina coast where tsunami inundations may occur.

  11. Reevaluating Interrater Reliability in Offender Risk Assessment

    NARCIS (Netherlands)

    van der Knaap, L.M.; Leenarts, L.E.W.; Born, M.P.; Oosterveld, P.

    2012-01-01

    Offender risk and needs assessment, one of the pillars of the risk-need-responsivity model of offender rehabilitation, usually depends on raters assessing offender risk and needs. The few available studies of interrater reliability in offender risk assessment are, however, limited in the

  12. Reevaluating Interrater Reliability in Offender Risk Assessment

    Science.gov (United States)

    van der Knaap, Leontien M.; Leenarts, Laura E. W.; Born, Marise Ph.; Oosterveld, Paul

    2012-01-01

    Offender risk and needs assessment, one of the pillars of the risk-need-responsivity model of offender rehabilitation, usually depends on raters assessing offender risk and needs. The few available studies of interrater reliability in offender risk assessment are, however, limited in the generalizability of their results. The present study…

  13. Total cardiovascular disease risk assessment: a review.

    LENUS (Irish Health Repository)

    Cooney, Marie Therese

    2011-09-01

    The high risk strategy for the prevention of cardiovascular disease (CVD) requires an assessment of an individual\\'s total CVD risk so that the most intensive risk factor management can be directed towards those at highest risk. Here we review developments in the assessment and estimation of total CVD risk.

  14. [Risk Assessment and Risk Management of Chemicals in China].

    Science.gov (United States)

    Wang, Tie-yu; Zhou, Yun-qiao; Li, Qi-feng; Lü, Yong-long

    2016-02-15

    Risk assessment and risk management have been increasingly approved as an effective approach for appropriate disposal and scientific management of chemicals. This study systematically analyzed the risk assessment methods of chemicals from three aspects including health risk, ecological risk and regional risk. Based on the current situation of classification and management towards chemicals in China, a specific framework of risk management on chemicals was proposed by selecting target chemicals, predominant industries and related stakeholders as the objects. The results of the present study will provide scientific support for improving risk assessment and reasonable management of chemicals in China.

  15. Risk communication and environmental risk assessment

    International Nuclear Information System (INIS)

    Petts, J.

    1994-01-01

    This paper attempts to provide a broad context for consideration of appropriate risk communication approaches. It examines the basis of public concerns and in particular the non-risk dimensions. The latter are so important in any risk decision that means of communication which can deal with them are required which extend beyond understanding how to present risk estimates. These means relate to (a) the decision processes themselves and the extent to which they provide for involvement of the public in decisions, (b) the communication skills of experts, and (c) the robustness of the risk information which is available. (Author)

  16. Molecular radiobiology and risk assessment

    International Nuclear Information System (INIS)

    Georgieva, R.

    2009-01-01

    Full text: Attitudes towards the radiation protection standards on in Europe and the world largely depends on scientific knowledge, periodically published by the United Nations Scientific Committee (UNSCEAR) and the recommendations of the International Commission on Radiation Protection (ICRP), which also comply with the research. The new scientific evidence by conducting an additional research is a crucial element in the process of protection of people, workers and patients in medicine from the adverse health effects. Although these standards are clear and easy to apply, there is serious doubt from a scientific perspective about the level of health risk at low doses, which keep up a fierce debate, both eight scientific and political society. The answer to this question requires the integrated efforts of many scientific disciplines. Increasingly rapid advances in biological and medical knowledge provide the necessary conditions for achieving this aim. This lecture tries to shed light on the current state of knowledge, the main unresolved problems in science in the context of radiation protection and risk assessment, and on those lines of research that have the greatest potential to address the issues. They mainly concern issues of doses and biological effects of different types of ionisation radiation, biological effects in cells/tissues which initiate health effects at low doses, individual variability and direct health risk assessment by epidemiological studies of groups exposed to lower doses irradiation

  17. Concept of risk: risk assessment and nuclear safety

    International Nuclear Information System (INIS)

    Thompson, P.B.

    1980-01-01

    The dissertation is a critical examination of risk assessment and its role in public policy. Nuclear power safety safety issues are selected as the primary source of illustrations and examples. The dissertation examines how risk assessment studies develop a concept of risk which becomes decisive for policy choices. Risk-assessment techniques are interpreted as instruments which secure an evaluation of risk which, in turn, figures prominently in technical reports on nuclear power. The philosophical critique is mounted on two levels. First, an epistemological critique surveys distinctions between the technical concept of risk and more familiar senses of risk. The critique shows that utilization of risk assessment re-structures the concept of risk. The technical concept is contrasted to the function of risk within a decision-maker's conceptual agenda and hierarchy of values. Second, an ethical critique exposes the value commitments of risk assessment recommendations. Although some of these values might be defended for policy decisions, the technical character of risk assessment obfuscates normative issues. Risk assessment is shown to be a form of factual enquiry which, nonetheless, represents a commitment to a specific selection of ethical and social values. Risk assessment should not be interpreted as a primary guide to decision unless the specific values incorporated into its concept of risk are stated explicitly and justified philosophically. Such a statement would allow value questions which have been sublimated by the factual tone of the analytic techniques to be debated on clear, social and ethical grounds

  18. Transparent Global Seismic Hazard and Risk Assessment

    Science.gov (United States)

    Smolka, Anselm; Schneider, John; Pinho, Rui; Crowley, Helen

    2013-04-01

    Vulnerability to earthquakes is increasing, yet advanced reliable risk assessment tools and data are inaccessible to most, despite being a critical basis for managing risk. Also, there are few, if any, global standards that allow us to compare risk between various locations. The Global Earthquake Model (GEM) is a unique collaborative effort that aims to provide organizations and individuals with tools and resources for transparent assessment of earthquake risk anywhere in the world. By pooling data, knowledge and people, GEM acts as an international forum for collaboration and exchange, and leverages the knowledge of leading experts for the benefit of society. Sharing of data and risk information, best practices, and approaches across the globe is key to assessing risk more effectively. Through global projects, open-source IT development and collaborations with more than 10 regions, leading experts are collaboratively developing unique global datasets, best practice, open tools and models for seismic hazard and risk assessment. Guided by the needs and experiences of governments, companies and citizens at large, they work in continuous interaction with the wider community. A continuously expanding public-private partnership constitutes the GEM Foundation, which drives the collaborative GEM effort. An integrated and holistic approach to risk is key to GEM's risk assessment platform, OpenQuake, that integrates all above-mentioned contributions and will become available towards the end of 2014. Stakeholders worldwide will be able to calculate, visualise and investigate earthquake risk, capture new data and to share their findings for joint learning. Homogenized information on hazard can be combined with data on exposure (buildings, population) and data on their vulnerability, for loss assessment around the globe. Furthermore, for a true integrated view of seismic risk, users can add social vulnerability and resilience indices to maps and estimate the costs and benefits

  19. Uncertainties in risk assessment and decision making

    International Nuclear Information System (INIS)

    Starzec, Peter; Purucker, Tom; Stewart, Robert

    2008-02-01

    The general concept for risk assessment in accordance with the Swedish model for contaminated soil implies that the toxicological reference value for a given receptor is first back-calculated to a corresponding concentration of a compound in soil and (if applicable) then modified with respect to e.g. background levels, acute toxicity, and factor of safety. This result in a guideline value that is subsequently compared to the observed concentration levels. Many sources of uncertainty exist when assessing whether the risk for a receptor is significant or not. In this study, the uncertainty aspects have been addressed from three standpoints: 1. Uncertainty in the comparison between the level of contamination (source) and a given risk criterion (e.g. a guideline value) and possible implications on subsequent decisions. This type of uncertainty is considered to be most important in situations where a contaminant is expected to be spatially heterogeneous without any tendency to form isolated clusters (hotspots) that can be easily delineated, i.e. where mean values are appropriate to compare to the risk criterion. 2. Uncertainty in spatial distribution of a contaminant. Spatial uncertainty should be accounted for when hotspots are to be delineated and the volume of soil contaminated with levels above a stated decision criterion has to be assessed (quantified). 3. Uncertainty in an ecological exposure model with regard to the moving pattern of a receptor in relation to spatial distribution of contaminant in question. The study points out that the choice of methodology to characterize the relation between contaminant concentration and a pre-defined risk criterion is governed by a conceptual perception of the contaminant's spatial distribution and also depends on the structure of collected data (observations). How uncertainty in transition from contaminant concentration into risk criterion can be quantified was demonstrated by applying hypothesis tests and the concept of

  20. Probabilistic risk assessment in the nuclear power industry

    International Nuclear Information System (INIS)

    Fullwood, R.R.; Hall, R.E.

    1988-01-01

    This book describes the more important improvements in risk assessment methodology developed over the last decade. The book covers the following areas - a general view of risk pertaining to nuclear power, mathematics necessary to understand the text, a concise overview of the light water reactors and their features for protecting the public, probabilities and consequences calculated to form risk assessment to the plant, and 34 applications of probabilistic risk assessment (PRA) in the power generation industry. There is a glossary of acronyms and unusual words and a list of references. (author)

  1. Risk assessment terminology: risk communication part 1

    Directory of Open Access Journals (Sweden)

    Gaetano Liuzzo

    2016-03-01

    Full Text Available The paper describes the terminology of risk communication in the view of food safety: the theory of stakeholders, the citizens’ involvement and the community interest and consultation are reported. Different aspects of risk communication (public communication, scientific uncertainty, trust, care, consensus and crisis communication are discussed.

  2. Bioavailability in ecological risk. Assessment for radionuclides

    International Nuclear Information System (INIS)

    Garnier-Laplace, J.; Gilbin, R.; Della-Vedova, C.; Adam, C.; Simon, O.; Denison, F.; Beaugelin, K.

    2005-01-01

    The guidance for performing Ecological Risk Assessments (ERA) in Europe has been published in 2003 in the EC's Technical Guidance Document. This document constitutes the official reference in which current water quality standards and risk assessment approach for metals/metalloids are still mainly based on total or dissolved concentrations. However, it has been recognized that accurate assessment of the bio-available metal fraction is crucial, even if the way to incorporate bioavailability into these procedures is still under discussion. The speciation of a pollutant in the exposure medium is the first factor that regulates its bioavailability and consequently its bioaccumulation and the induced biological effects. Therefore, within any ecological risk assessment, bioavailability has obvious implications: firstly in exposure analysis which aim is to determine Predicted Exposure Concentration (PEC); secondly in effect analysis while deriving the so-called Predicted No-Effect Concentrations (PNEC) as toxicity is often linked to the amount of the contaminant incorporated into the tissues of biota. Similarities between metals/metalloids and radionuclides are limited to the biogeochemical behaviour of the element considered and to the need to use bioavailability models. In addition, for radionuclides, emitted ionising radiations (type and energy) need to be taken into account for both exposure and effect analyses whilst performing dosimetric calculations appropriate to the exposure scenarios. A methodology for properly implementing bioavailability models is explained and illustrated for aqueous U(VI), starting from a comprehensive review of the thermodynamic data relevant to environmentally-realistic physico-chemical conditions. Then, the use of thermodynamic equilibrium modelling as a tool for interpreting the bioavailability of U(VI) is presented. Using a systematic approach, different bioavailability models of increasing complexity were tested to model U bio

  3. Assessment of accident risks in the CRBRP. Volume 2. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-03-01

    Appendices to Volume I include core-related accident-sequence definition, CRBRP risk-assessment sequence-probability determinations, failure-probability data, accident scenario evaluation, radioactive material release analysis, ex-core accident analysis, safety philosophy and design features, calculation of reactor accident consequences, sensitivity study, and risk from fires.

  4. Applying Multi-Criteria Analysis Methods for Fire Risk Assessment

    Directory of Open Access Journals (Sweden)

    Pushkina Julia

    2015-11-01

    Full Text Available The aim of this paper is to prove the application of multi-criteria analysis methods for optimisation of fire risk identification and assessment process. The object of this research is fire risk and risk assessment. The subject of the research is studying the application of analytic hierarchy process for modelling and influence assessment of various fire risk factors. Results of research conducted by the authors can be used by insurance companies to perform the detailed assessment of fire risks on the object and to calculate a risk extra charge to an insurance premium; by the state supervisory institutions to determine the compliance of a condition of object with requirements of regulations; by real state owners and investors to carry out actions for decrease in degree of fire risks and minimisation of possible losses.

  5. RISK MANAGEMENT: AN INTEGRATED APPROACH TO RISK MANAGEMENT AND ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Szabo Alina

    2012-12-01

    Full Text Available Purpose: The objective of this paper is to offer an overview over risk management cycle by focusing on prioritization and treatment, in order to ensure an integrated approach to risk management and assessment, and establish the ‘top 8-12’ risks report within the organization. The interface with Internal Audit is ensured by the implementation of the scoring method to prioritize risks collected from previous generated risk report. Methodology/approach: Using evidence from other research in the area and the professional expertise, this article outlines an integrated approach to risk assessment and risk management reporting processes, by separating the risk in two main categories: strategic and operational risks. The focus is on risk prioritization and scoring; the final output will comprise a mix of strategic and operational (‘top 8-12’ risks, which should be used to establish the annual Internal Audit plan. Originality/value: By using an integrated approach to risk assessment and risk management will eliminate the need for a separate Internal Audit risk assessment over prevailing risks. It will reduce the level of risk assessment overlap by different functions (Tax, Treasury, Information System over the same risk categories as a single methodology, is used and will align timings of risk assessment exercises. The risk prioritization by usage of risk and control scoring criteria highlights the combination between financial and non-financial impact criteria allowing risks that do not naturally lend themselves to a financial amount to be also assessed consistently. It is emphasized the usage of score method to prioritize the risks included in the annual audit plan in order to increase accuracy and timelines.

  6. Risks, risk assessment and risk competence in toxicology

    Science.gov (United States)

    Stahlmann, Ralf; Horvath, Aniko

    2015-01-01

    Understanding the toxic effects of xenobiotics requires sound knowledge of physiology and biochemistry. The often described lack of understanding pharmacology/toxicology is therefore primarily caused by the general absence of the necessary fundamental knowledge. Since toxic effects depend on exposure (or dosage) assessing the risks arising from toxic substances also requires quantitative reasoning. Typically public discussions nearly always neglect quantitative aspects and laypersons tend to disregard dose-effect-relationships. One of the main reasons for such disregard is the fact that exposures often occur at extremely low concentrations that can only be perceived intellectually but not by the human senses. However, thresholds in the low exposure range are often scientifically disputed. At the same time, ignorance towards known dangers is wide-spread. Thus, enhancing the risk competence of laypersons will have to be initially restricted to increasing the awareness of existing problems. PMID:26195922

  7. Risks, risk assessment and risk competence in toxicology.

    Science.gov (United States)

    Stahlmann, Ralf; Horvath, Aniko

    2015-01-01

    Understanding the toxic effects of xenobiotics requires sound knowledge of physiology and biochemistry. The often described lack of understanding pharmacology/toxicology is therefore primarily caused by the general absence of the necessary fundamental knowledge. Since toxic effects depend on exposure (or dosage) assessing the risks arising from toxic substances also requires quantitative reasoning. Typically public discussions nearly always neglect quantitative aspects and laypersons tend to disregard dose-effect-relationships. One of the main reasons for such disregard is the fact that exposures often occur at extremely low concentrations that can only be perceived intellectually but not by the human senses. However, thresholds in the low exposure range are often scientifically disputed. At the same time, ignorance towards known dangers is wide-spread. Thus, enhancing the risk competence of laypersons will have to be initially restricted to increasing the awareness of existing problems.

  8. Risks, risk assessment and risk competence in toxicology

    Directory of Open Access Journals (Sweden)

    Stahlmann, Ralf

    2015-07-01

    Full Text Available Understanding the toxic effects of xenobiotics requires sound knowledge of physiology and biochemistry. The often described lack of understanding pharmacology/toxicology is therefore primarily caused by the general absence of the necessary fundamental knowledge. Since toxic effects depend on exposure (or dosage assessing the risks arising from toxic substances also requires quantitative reasoning. Typically public discussions nearly always neglect quantitative aspects and laypersons tend to disregard dose-effect-relationships. One of the main reasons for such disregard is the fact that exposures often occur at extremely low concentrations that can only be perceived intellectually but not by the human senses. However, thresholds in the low exposure range are often scientifically disputed. At the same time, ignorance towards known dangers is wide-spread. Thus, enhancing the risk competence of laypersons will have to be initially restricted to increasing the awareness of existing problems.

  9. A framework for combining social impact assessment and risk assessment

    NARCIS (Netherlands)

    Mahmoudi, Hossein; Renn, Ortwin; Vanclay, Frank; Hoffmann, Volker; Karami, Ezatollah

    An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify

  10. A framework for combining social impact assessment and risk assessment

    NARCIS (Netherlands)

    Mahmoudi, Hossein; Renn, Ortwin; Vanclay, Frank; Hoffmann, Volker; Karami, Ezatollah

    2013-01-01

    An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify

  11. The assessment of technical risks

    International Nuclear Information System (INIS)

    Jaeger, T.A.

    1978-01-01

    The safety of technical systems is so difficult to assess because the concept 'risk' contains technical-scientific factors as well as components of individual and social psychology. Immediate or short-term hazards of human life as i.e. caused by the operation of industrial plants and mediate and thus long-term hazards have to be distinguished. Characteristic for the second hazard groups is the great time-lag before the effect takes place. Thus a causal relationship can be recognized only late and not definitely. Even when the causes have been obviated the effects still show. The development of a systems-analytical model as a basis of decisive processes for the introduction of highly endangered large-scale technologies seems particularly difficult. A starting point for the quantification of the risk can still be seen in the product of the probability of realization and the extent of the damage. Public opinion, however, does not base its evaluations on an objective concept of risk but tends to have an attitude of aversion against great and disastrous accidents. On the other hand, plenty of slight accidents are accepted much more easily, even when the amount of deadly victims from accidents reaches dimensions beyond those of the rare large-scale accidents. Here, mostly the damage possible but not the probability of its occurence is seen, let alone the general use of the new technology. The value of the mathematical models for estimating risks is mainly due to the fact that they are able to clear up decisions. (orig./HP) [de

  12. MATHEMATICAL MODEL FOR CALCULATION OF INFORMATION RISKS FOR INFORMATION AND LOGISTICS SYSTEM

    Directory of Open Access Journals (Sweden)

    A. G. Korobeynikov

    2015-05-01

    Full Text Available Subject of research. The paper deals with mathematical model for assessment calculation of information risks arising during transporting and distribution of material resources in the conditions of uncertainty. Meanwhile information risks imply the danger of origin of losses or damage as a result of application of information technologies by the company. Method. The solution is based on ideology of the transport task solution in stochastic statement with mobilization of mathematical modeling theory methods, the theory of graphs, probability theory, Markov chains. Creation of mathematical model is performed through the several stages. At the initial stage, capacity on different sites depending on time is calculated, on the basis of information received from information and logistic system, the weight matrix is formed and the digraph is under construction. Then there is a search of the minimum route which covers all specified vertexes by means of Dejkstra algorithm. At the second stage, systems of differential Kolmogorov equations are formed using information about the calculated route. The received decisions show probabilities of resources location in concrete vertex depending on time. At the third stage, general probability of the whole route passing depending on time is calculated on the basis of multiplication theorem of probabilities. Information risk, as time function, is defined by multiplication of the greatest possible damage by the general probability of the whole route passing. In this case information risk is measured in units of damage which corresponds to that monetary unit which the information and logistic system operates with. Main results. Operability of the presented mathematical model is shown on a concrete example of transportation of material resources where places of shipment and delivery, routes and their capacity, the greatest possible damage and admissible risk are specified. The calculations presented on a diagram showed

  13. Quantitative flood risk assessment for Polders

    International Nuclear Information System (INIS)

    Manen, Sipke E. van; Brinkhuis, Martine

    2005-01-01

    In the Netherlands, the design of dikes and other water retaining structures is based on an acceptable probability (frequency) of overtopping. In 1993 a new safety concept was introduced based on total flood risk. Risk was defined as the product of probability and consequences. In recent years advanced tools have become available to calculate the actual flood risk of a polder. This paper describes the application of these tools to an existing lowland river area. The complete chain of calculations necessary to estimate the risk of flooding of a polder (or dike ring) is presented. The difficulties in applying the present day tools and the largest uncertainties in the calculations are shown

  14. Quantitative flood risk assessment for Polders

    Energy Technology Data Exchange (ETDEWEB)

    Manen, Sipke E. van [Ministry of Transport, Public Works and Water Management, Bouwdienst Rijkswaterstaat, Griffioenlaan 2, Utrecht 3526 (Netherlands)]. E-mail: s.e.vmanen@bwd.rws.minvenw.nl; Brinkhuis, Martine [Ministry of Transport, Public Works and Water Management, Delft (Netherlands)

    2005-12-01

    In the Netherlands, the design of dikes and other water retaining structures is based on an acceptable probability (frequency) of overtopping. In 1993 a new safety concept was introduced based on total flood risk. Risk was defined as the product of probability and consequences. In recent years advanced tools have become available to calculate the actual flood risk of a polder. This paper describes the application of these tools to an existing lowland river area. The complete chain of calculations necessary to estimate the risk of flooding of a polder (or dike ring) is presented. The difficulties in applying the present day tools and the largest uncertainties in the calculations are shown.

  15. The relation of risk assessment and health impact assessment

    DEFF Research Database (Denmark)

    Ádám, Balázs; Gulis, Gabriel

    2013-01-01

    than assessing a present situation. As part of this process, however, methods applied in risk assessment are used. Risk assessment typically characterises relation of a well-defined risk factor to a well-defined health outcome. Within HIA usually several individual risk assessments are needed...... of the causal chain from the proposal through related health determinants and risk factors to health outcomes. The stepwise analysis, systematic prioritization and consideration of horizontal interactions between the causal pathways make it feasible to use widely recognized risk assessment methods in the HIA......The level and distribution of health risks in a society is substantially influenced by measures of various policies, programmes or projects. Risk assessment can evaluate the nature, likelihood and severity of an adverse effect. Health impact assessment (HIA) provides similar function when used...

  16. Area-based assessment of extinction risk.

    Science.gov (United States)

    Hei, Fangliang

    2012-05-01

    Underpinning the International Union for Conservation of Nature (IUCN) Red List is the assessment of extinction risk as determined by the size and degree of loss of populations. The IUCN system lists a species as Critically Endangered, Endangered, or Vulnerable if its population size declines 80%, 50%, or 30% within a given time frame. However, effective implementation of the system faces substantial challenges and uncertainty because geographic scale data on population size and long-term dynamics are scarce. I develop a model to quantify extinction risk using a measure based on a species' distribution, a much more readily obtained quantity. The model calculates the loss of the area of occupancy that is equivalent to the loss of a given proportion of a population. It is a very simple yet general model that has no free parameters and is independent of scale. The model predicted well the distributions of 302 tree species at a local scale and the distributions of 348 species of North American land birds. This area-based model provides a solution to the long-standing problem for IUCN assessments of lack of data on population sizes, and thus it will contribute to facilitating the quantification of extinction risk worldwide.

  17. Getting fire risk assessment right.

    Science.gov (United States)

    Charters, David

    2012-06-01

    The NHS has one of the world's largest and most varied estates, which at any time accommodates many of the most dependent people in society. With around 6,000 fires occurring in NHS premises each year, its duty of care--and that of other healthcare providers--demands very close attention to fire safety. Here Dr David Charters BSc, PhD, CEng, FIFireE, MIMechE, MSFPE, director of Fire Engineering at BRE Global, an independent third party approvals body offering certification of fire, security, and sustainability products and services, examines the critical role of fire risk assessment, and explains why the process should provide the 'foundation' for effective fire safety measures.

  18. Supporting Risk Assessment: Accounting for Indirect Risk to Ecosystem Components.

    Directory of Open Access Journals (Sweden)

    Cathryn Clarke Murray

    Full Text Available The multi-scalar complexity of social-ecological systems makes it challenging to quantify impacts from human activities on ecosystems, inspiring risk-based approaches to assessments of potential effects of human activities on valued ecosystem components. Risk assessments do not commonly include the risk from indirect effects as mediated via habitat and prey. In this case study from British Columbia, Canada, we illustrate how such "indirect risks" can be incorporated into risk assessments for seventeen ecosystem components. We ask whether (i the addition of indirect risk changes the at-risk ranking of the seventeen ecosystem components and if (ii risk scores correlate with trophic prey and habitat linkages in the food web. Even with conservative assumptions about the transfer of impacts or risks from prey species and habitats, the addition of indirect risks in the cumulative risk score changes the ranking of priorities for management. In particular, resident orca, Steller sea lion, and Pacific herring all increase in relative risk, more closely aligning these species with their "at-risk status" designations. Risk assessments are not a replacement for impact assessments, but-by considering the potential for indirect risks as we demonstrate here-they offer a crucial complementary perspective for the management of ecosystems and the organisms within.

  19. 岩体滑坡冲击能计算及受灾体易损性定量评估%IMPACT ENERGY CALCULATION FOR ROCK SLOPE AND QUANTITATIVE ASSESSMENT OF VULNERABILITY FOR ELEMENT AT RISK

    Institute of Scientific and Technical Information of China (English)

    吴越; 刘东升; 李明军

    2011-01-01

    In the processes of landslide mass sliding and impacting on element at risk, the internal collapse of landslide mass will dissipate part of kinetic energy. But in practice, this part of energy is not taken usually into account. The discrete element method(DEM) is adopted to get impact force-time curves; and the impact energy conversion equation is also deduced based on impulse law and energy conservation law. With the analysis of the energy dissipation principle in the sliding and impacting processes of a practical rock slope, a comparison is made between the calculation method which takes both internal and external energy dissipations into account and the method which only takes external energy dissipation into account. The result shows that there is a significant difference between the two methods; and the internal energy dissipation can not be ignored. Moreover, the influence factors of impact energy and vulnerability for element at risk are both analyzed. The analysis result shows that impact energy is most sensitive to internal friction angle of landslide debris; second sensitive to distance between element at risk and landslide mass, gap length between joint segments, density of landslide mass and width of impact surface; last sensitive to the cohesion of landslide mass. In addition, the impact direction of landslide debris can simulataneously effect both impact energy and anti-impact energy.%滑体下滑及对受灾体冲击过程中,由于滑体内部的崩解碰撞将会耗散部分动能,而工程中通常采用简化的方法计算滑体冲击能,没有考虑内部耗能的影响.采用离散元法模拟得到滑体对受灾体的冲击力-时间曲线,根据冲量定律和能量守恒定律换算得到滑体冲击能.以实际工程为例,详细分析滑体下滑过程与冲击受灾体过程中的能耗规律.结果表明:同时考虑下滑和冲击过程中滑体内外部耗能的计算方法与只考虑滑体外部摩擦耗能的计算方法相比,

  20. Social aspects of risk assessment

    International Nuclear Information System (INIS)

    Otway, H.J.; Linnerooth, J.; Niehaus, F.

    1977-01-01

    Plans for technological development have often been met by demands for a closer examination of the associated benefits and risks and the consideration of social values in public planning and decision processes. A theoretical framework for inter-disciplinary risk assessment studies is presented to aid the balancing of technical data with social values in decision making. Methods for obtaining value measures are reviewed and an attitude-based method is developed in detail; this model allows identification of the relative importance of the technical, psychological and social factors which underlie attitudes and indicates which factors differentiate between social groups. Results of a pilot application to nuclear power are summarized. For these subjects, different attitudes between pro and con were primarily due to strongly differing beliefs about the benefits of nuclear power. Preliminary results are reported of an application of this model with a heterogeneous sample drawn from the general public. The cognitive limitations which affect rationality in intuitive decision making are summarized as background to introduce formal decision methodologies for the use of attitude data in public decision making

  1. Illstrative probabilistic biosphere model for Yucca Mountain individual risk calculations

    International Nuclear Information System (INIS)

    Wilems, R.E.

    1994-01-01

    The proposed EPA Standards for the disposal of spent fuel, high-level and transuranic radioactive waste prescribe future biosphere--one in which no sustained human activity occurs inside the controlled zone, yet sustained use of groundwater occurs just outside the controlled zone boundary. Performance assessments have generally assumed a person at this location extracts all his water needs directly from the projected contaminated plume for all of his life. Dose to this maximally-exposed individual is too conservative a measure of performance for a nuclear waste repository and does not reflect the isolation characteristics of a site. A better measure is individual risk in which uncertainties in biosphere characteristics for the longer periods of performance, for a site like Yucca Mountain only those characteristics associated with well water scenarios need be prescribed. Such a prescription of the biosphere is appropriate because the goal of the regulations is to provide indicators of future performance so the regulators can make a responsible decision regarding reasonable assurance of public health and safety

  2. Corrosion calculations report for the safety assessment SR-Site

    International Nuclear Information System (INIS)

    2010-12-01

    This report is a compilation of the quantitative assessments of corrosion of the copper canisters in a KBS-3 repository. The calculations are part of the safety assessment SR-Site that is the long-term safety assessment to support the license application for building a final repository for spent nuclear fuel at Forsmark, Sweden. The safety assessment methodology gives the frame for the structured and documented approach to assess all conceivable corrosion processes. The quantitative assessments are done in different ways depending on the nature of the process and on the implications for the long-term safety. The starting point for the handling of the corrosion processes is the description of all known corrosion processes for copper with the current knowledge base and applied to the specific system and geology. Already at this stage some processes are excluded for further analysis, for example if the repository environment is not a sufficient prerequisite for the process to occur. The next step is to identify processes where the extent of corrosion could be bounded, e.g. by a mass balance approach. For processes where a mass balance is not limiting, the mass transport of corrodants (or corrosion products) is taken into account. A simple approach would be just to calculate the diffusive transport of corrodants through the bentonite, but generally the transport resistance for the interface between groundwater in a rock fracture intersecting the deposition hole and the bentonite buffer is more important. In SR-Site, the concept of equivalent flowrate, Q eq , is used. This assessment is done integrated with the evaluation of the geochemical and hydrogeological evolution of the repository. For most of the corrosion processes analysed, the corrosion depth is much smaller than the copper shell thickness, even for the assessment time of 10 6 years. Several processes give corrosion depths less than 100 μm, but no process give corrosion depths larger than a few millimetres

  3. Corrosion calculations report for the safety assessment SR-Site

    Energy Technology Data Exchange (ETDEWEB)

    2010-12-15

    This report is a compilation of the quantitative assessments of corrosion of the copper canisters in a KBS-3 repository. The calculations are part of the safety assessment SR-Site that is the long-term safety assessment to support the license application for building a final repository for spent nuclear fuel at Forsmark, Sweden. The safety assessment methodology gives the frame for the structured and documented approach to assess all conceivable corrosion processes. The quantitative assessments are done in different ways depending on the nature of the process and on the implications for the long-term safety. The starting point for the handling of the corrosion processes is the description of all known corrosion processes for copper with the current knowledge base and applied to the specific system and geology. Already at this stage some processes are excluded for further analysis, for example if the repository environment is not a sufficient prerequisite for the process to occur. The next step is to identify processes where the extent of corrosion could be bounded, e.g. by a mass balance approach. For processes where a mass balance is not limiting, the mass transport of corrodants (or corrosion products) is taken into account. A simple approach would be just to calculate the diffusive transport of corrodants through the bentonite, but generally the transport resistance for the interface between groundwater in a rock fracture intersecting the deposition hole and the bentonite buffer is more important. In SR-Site, the concept of equivalent flowrate, Q{sub eq}, is used. This assessment is done integrated with the evaluation of the geochemical and hydrogeological evolution of the repository. For most of the corrosion processes analysed, the corrosion depth is much smaller than the copper shell thickness, even for the assessment time of 106 years. Several processes give corrosion depths less than 100 mum, but no process give corrosion depths larger than a few

  4. Usefulness of the risk assessment technique in solving transportation problems

    International Nuclear Information System (INIS)

    Johnson, J.F.; Hall, R.J.

    1976-08-01

    The purpose was to develop and use a model to assess the risk associated with the shipment of nuclear and non-nuclear hazardous energy-related materials. The analysis method comprises the steps of describing the system, identifying the release sequence, evaluating the sequence, and calculating and assessing the risk. Plutonium shipment is used as an example. Uses of this method to improve transportation safety are discussed. 12 fig

  5. Risk assessment of forensic patients: nurses' role.

    Science.gov (United States)

    Encinares, Maxima; McMaster, Jeff James; McNamee, Jim

    2005-03-01

    One of the unique roles of forensic nurses is to conduct risk assessments. Establishing a therapeutic nurse-patient relationship helps forensic nurses perform accurate and useful risk assessments. Accurate risk assessments can facilitate formulation of individualized risk management plans, designed to meet patients' needs and ensure public safety. The importance of forensic nurses' knowledge and application of appropriate communication and proper documentation cannot be overemphasized.

  6. Development and External Validation of the Korean Prostate Cancer Risk Calculator for High-Grade Prostate Cancer: Comparison with Two Western Risk Calculators in an Asian Cohort.

    Science.gov (United States)

    Park, Jae Young; Yoon, Sungroh; Park, Man Sik; Choi, Hoon; Bae, Jae Hyun; Moon, Du Geon; Hong, Sung Kyu; Lee, Sang Eun; Park, Chanwang; Byun, Seok-Soo

    2017-01-01

    We developed the Korean Prostate Cancer Risk Calculator for High-Grade Prostate Cancer (KPCRC-HG) that predicts the probability of prostate cancer (PC) of Gleason score 7 or higher at the initial prostate biopsy in a Korean cohort (http://acl.snu.ac.kr/PCRC/RISC/). In addition, KPCRC-HG was validated and compared with internet-based Western risk calculators in a validation cohort. Using a logistic regression model, KPCRC-HG was developed based on the data from 602 previously unscreened Korean men who underwent initial prostate biopsies. Using 2,313 cases in a validation cohort, KPCRC-HG was compared with the European Randomized Study of Screening for PC Risk Calculator for high-grade cancer (ERSPCRC-HG) and the Prostate Cancer Prevention Trial Risk Calculator 2.0 for high-grade cancer (PCPTRC-HG). The predictive accuracy was assessed using the area under the receiver operating characteristic curve (AUC) and calibration plots. PC was detected in 172 (28.6%) men, 120 (19.9%) of whom had PC of Gleason score 7 or higher. Independent predictors included prostate-specific antigen levels, digital rectal examination findings, transrectal ultrasound findings, and prostate volume. The AUC of the KPCRC-HG (0.84) was higher than that of the PCPTRC-HG (0.79, pexternal validation. Calibration plots also revealed better performance of KPCRC-HG and ERSPCRC-HG than that of PCPTRC-HG on external validation. At a cut-off of 5% for KPCRC-HG, 253 of the 2,313 men (11%) would not have been biopsied, and 14 of the 614 PC cases with Gleason score 7 or higher (2%) would not have been diagnosed. KPCRC-HG is the first web-based high-grade prostate cancer prediction model in Korea. It had higher predictive accuracy than PCPTRC-HG in a Korean population and showed similar performance with ERSPCRC-HG in a Korean population. This prediction model could help avoid unnecessary biopsy and reduce overdiagnosis and overtreatment in clinical settings.

  7. Radiological safety and risk assessment

    International Nuclear Information System (INIS)

    Hunter, P.H.; Barg, D.C.; Baird, R.D.; Card, D.H.; de Souza, F.; Elder, J.; Felthauser, K.; Jensen, C.; Winkler, V.

    1982-02-01

    A brief radiological safety and risk assessment of a nuclear power generation center with an adjacent on-site waste disposal facility at a specific site in the State of Utah is presented. The assessment was conducted to assist in determining the feasibility and practicality of developing a nuclear energy center (NEC) in Utah consisting of nine 1250 MWe nuclear pressurized water reactor (PWR) electrical generating units arranged in 3 clusters of 3 units each known as triads. The site selected for this conceptual study is in the Horse Bench area about 15 miles directly south of the town of Green River, Utah. The radiological issues included direct radiation exposures to on-site workers and the off-site population, release of radioactive material, and effects of these releases for both normal operations and accidental occurrences. The basic finding of this study is that the concept of an NEC in the Green River area, specifically at the Horse Bench site, is radiologically feasible

  8. Risk assessment - The future trend

    International Nuclear Information System (INIS)

    Marks, G.A.

    1991-01-01

    Many organizations today are faced with cleaning a site or facility, selecting appropriate remedial alternatives, or explaining the potential effects on human health and the environment caused by the releases of toxic compounds into the air, soil, and water, The use of risk assessment (RA) as a management tool is increasing because it offers an integrated approach to the analysis of toxicological, geological, physio-chemical, meteorological, statistical, and biological parameters that must be evaluated in the assessment of potential impacts to human health. The regulatory atmosphere in the 1990s is leaning toward the adoption of further laws requiring the completion of the RA process. Any industry involved in submitting permit applications to Air Quality Management Districts or complying with California's Proposition 65 and AB 2588 will be required to prepare RAs. Several guidance documents are available that support the RA process including the California Site Mitigation Decision Tree Manual published by the State Department of Health Services (DHS), which bases its approach on developing cleanup objectives (Applied Action Levels) on RA. This presentation focuses on the applications RA can have to the petroleum industry and the kinds of data that each case should develop to make maximum use of the RA process

  9. Gender differences in risk assessment

    Directory of Open Access Journals (Sweden)

    Christine R. Harris

    2006-07-01

    Full Text Available Across many real-world domains, men engage in more risky behaviors than do women. To examine some of the beliefs and preferences that underlie this difference, 657 participants assessed their likelihood of engaging in various risky activities relating to four different domains (gambling, health, recreation, and social, and reported their perceptions of (1 probability of negative outcomes, (2 severity of potential negative outcomes, and (3 enjoyment expected from the risky activities. Women's greater perceived likelihood of negative outcomes and lesser expectation of enjoyment partially mediated their lower propensity toward risky choices in gambling, recreation, and health domains. Perceptions of severity of potential outcomes was a partial mediator in the gambling and health domains. The genders did not differ in their propensity towards taking social risks. A fifth domain of activities associated with high potential payoffs and fixed minor costs was also assessed. In contrast to other domains, women reported being more likely to engage in behaviors in this domain. This gender difference was partially mediated by women's more optimistic judgments of the probability of good outcomes and of

  10. Supporting Risk Assessment: Accounting for Indirect Risk to Ecosystem Components

    Science.gov (United States)

    Mach, Megan E.; Martone, Rebecca G.; Singh, Gerald G.; O, Miriam; Chan, Kai M. A.

    2016-01-01

    The multi-scalar complexity of social-ecological systems makes it challenging to quantify impacts from human activities on ecosystems, inspiring risk-based approaches to assessments of potential effects of human activities on valued ecosystem components. Risk assessments do not commonly include the risk from indirect effects as mediated via habitat and prey. In this case study from British Columbia, Canada, we illustrate how such “indirect risks” can be incorporated into risk assessments for seventeen ecosystem components. We ask whether (i) the addition of indirect risk changes the at-risk ranking of the seventeen ecosystem components and if (ii) risk scores correlate with trophic prey and habitat linkages in the food web. Even with conservative assumptions about the transfer of impacts or risks from prey species and habitats, the addition of indirect risks in the cumulative risk score changes the ranking of priorities for management. In particular, resident orca, Steller sea lion, and Pacific herring all increase in relative risk, more closely aligning these species with their “at-risk status” designations. Risk assessments are not a replacement for impact assessments, but—by considering the potential for indirect risks as we demonstrate here—they offer a crucial complementary perspective for the management of ecosystems and the organisms within. PMID:27632287

  11. Risk assessment and risk management in managed aquifer recharge

    CSIR Research Space (South Africa)

    Page, D

    2012-06-01

    Full Text Available This chapter presents the methodologies used for risk assessment and risk management in MAR in Australia and the European Union, qualitative and quantitative approaches adopted within the RECLAIM Water project and case studies where the outcomes...

  12. Regional scale ecological risk assessment: using the relative risk model

    National Research Council Canada - National Science Library

    Landis, Wayne G

    2005-01-01

    ...) in the performance of regional-scale ecological risk assessments. The initial chapters present the methodology and the critical nature of the interaction between risk assessors and decision makers...

  13. Review of calculational models and computer codes for environmental dose assessment of radioactive releases

    International Nuclear Information System (INIS)

    Strenge, D.L.; Watson, E.C.; Droppo, J.G.

    1976-06-01

    The development of technological bases for siting nuclear fuel cycle facilities requires calculational models and computer codes for the evaluation of risks and the assessment of environmental impact of radioactive effluents. A literature search and review of available computer programs revealed that no one program was capable of performing all of the great variety of calculations (i.e., external dose, internal dose, population dose, chronic release, accidental release, etc.). Available literature on existing computer programs has been reviewed and a description of each program reviewed is given

  14. Review of calculational models and computer codes for environmental dose assessment of radioactive releases

    Energy Technology Data Exchange (ETDEWEB)

    Strenge, D.L.; Watson, E.C.; Droppo, J.G.

    1976-06-01

    The development of technological bases for siting nuclear fuel cycle facilities requires calculational models and computer codes for the evaluation of risks and the assessment of environmental impact of radioactive effluents. A literature search and review of available computer programs revealed that no one program was capable of performing all of the great variety of calculations (i.e., external dose, internal dose, population dose, chronic release, accidental release, etc.). Available literature on existing computer programs has been reviewed and a description of each program reviewed is given.

  15. Risk assessment of metal vapor arcing

    Science.gov (United States)

    Hill, Monika C. (Inventor); Leidecker, Henning W. (Inventor)

    2009-01-01

    A method for assessing metal vapor arcing risk for a component is provided. The method comprises acquiring a current variable value associated with an operation of the component; comparing the current variable value with a threshold value for the variable; evaluating compared variable data to determine the metal vapor arcing risk in the component; and generating a risk assessment status for the component.

  16. Risk assessment and management in IOR projects

    International Nuclear Information System (INIS)

    Goodyear, S.G.; Gregory, A.T.

    1994-01-01

    The application of IOR techniques is one of the investment opportunities open to Exploration and Production companies. A project will only go forward if the perceived balance between the rewards and the risks is acceptable. IOR projects may be ruled out because they are considered to involve significantly higher risks than conventional developments. Therefore, some means of evaluating the actual level of risk may be required if the full economic benefits from IOR techniques are to be realized. Risk assessment is a key element in safety cases, where a well-established methodology for quantifying risk exists. This paper discusses the extension of these methods to IOR project risk assessment. Combining reservoir and IOR technique uncertainties with their impact on project performance allows project risk to be better quantified. The results of the risk assessment are presented in terms of a risk-reward diagram that plots the probability surface for possible project outcomes as a function of NPV (reward) and exposure (risk)

  17. Methodology of environmental risk assessment management

    Directory of Open Access Journals (Sweden)

    Saša T. Bakrač

    2012-04-01

    Full Text Available Successful protection of environment is mostly based on high-quality assessment of potential and present risks. Environmental risk management is a complex process which includes: identification, assessment and control of risk, namely taking measures in order to minimize the risk to an acceptable level. Environmental risk management methodology: In addition to these phases in the management of environmental risk, appropriate measures that affect the reduction of risk occurrence should be implemented: - normative and legal regulations (laws and regulations, - appropriate organizational structures in society, and - establishing quality monitoring of environment. The emphasis is placed on the application of assessment methodologies (three-model concept, as the most important aspect of successful management of environmental risk. Risk assessment methodology - European concept: The first concept of ecological risk assessment methodology is based on the so-called European model-concept. In order to better understand this ecological risk assessment methodology, two concepts - hazard and risk - are introduced. The European concept of environmental risk assessment has the following phases in its implementation: identification of hazard (danger, identification of consequences (if there is hazard, estimate of the scale of consequences, estimate of consequence probability and risk assessment (also called risk characterization. The European concept is often used to assess risk in the environment as a model for addressing the distribution of stressors along the source - path - receptor line. Risk assessment methodology - Canadian concept: The second concept of the methodology of environmental risk assessment is based on the so-called Canadian model-concept. The assessment of ecological risk includes risk arising from natural events (floods, extreme weather conditions, etc., technological processes and products, agents (chemical, biological, radiological, etc

  18. Apperception and assessment of technological risks

    International Nuclear Information System (INIS)

    Hoyos, C.; Hauke, G.

    1986-01-01

    Risk is defined to be the possibility to induce damage or loss. Any person confronted with risk in his activities has to assess the risk in every case. The author explains a number of actions and events that have been worked out to train people in better management of risk, especially in the working environment. (DG) [de

  19. Performing the lockout/tagout risk assessment.

    Science.gov (United States)

    Wallace, W Jon

    2007-03-01

    Lockout/tagout provides the greatest level routine, repetitive, and integral to the production process, a risk assessment should be performed. If the task performed poses an unacceptable risk, acceptable risk reduction methods should be implemented to reduce the risk to acceptable levels.

  20. Risk communication in environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rahm-Crites, L. [Lawrence Livermore National Lab., Germantown, MD (United States). Washington Operations Office

    1996-08-26

    Since the enactment of NEPA and other environmental legislation, the concept of `risk communication` has expanded from simply providing citizens with scientific information about risk to exploring ways of making risk information genuinely meaningful to the public and facilitating public involvement in the very processes whereby risk is analyzed and managed. Contemporary risk communication efforts attempt to find more effective ways of conveying increasingly complex risk information and to develop more democratic and proactive approaches to community involvement, in particular to ensuring the participation of diverse populations in risk decisions. Although considerable progress has been made in a relatively short time, risk communication researchers and practitioners currently face a number of challenges in a time of high expectations, low trust, and low budgets.

  1. INCORPORATING NONCHEMICAL STRESSORS INTO CUMMULATIVE RISK ASSESSMENTS

    Science.gov (United States)

    The risk assessment paradigm has begun to shift from assessing single chemicals using "reasonable worst case" assumptions for individuals to considering multiple chemicals and community-based models. Inherent in community-based risk assessment is examination of all stressors a...

  2. [Urban ecological risk assessment: a review].

    Science.gov (United States)

    Wang, Mei-E; Chen, Wei-Ping; Peng, Chi

    2014-03-01

    With the development of urbanization and the degradation of urban living environment, urban ecological risks caused by urbanization have attracted more and more attentions. Based on urban ecology principles and ecological risk assessment frameworks, contents of urban ecological risk assessment were reviewed in terms of driven forces, risk resources, risk receptors, endpoints and integrated approaches for risk assessment. It was suggested that types and degrees of urban economical and social activities were the driven forces for urban ecological risks. Ecological functional components at different levels in urban ecosystems as well as the urban system as a whole were the risk receptors. Assessment endpoints involved in changes of urban ecological structures, processes, functional components and the integrity of characteristic and function. Social-ecological models should be the major approaches for urban ecological risk assessment. Trends for urban ecological risk assessment study should focus on setting a definite protection target and criteria corresponding to assessment endpoints, establishing a multiple-parameter assessment system and integrative assessment approaches.

  3. Colon Cancer Risk Assessment - Gauss Program

    Science.gov (United States)

    An executable file (in GAUSS) that projects absolute colon cancer risk (with confidence intervals) according to NCI’s Colorectal Cancer Risk Assessment Tool (CCRAT) algorithm. GAUSS is not needed to run the program.

  4. Risk assessment theory, methods, and applications

    CERN Document Server

    Rausand, Marvin

    2011-01-01

    With its balanced coverage of theory and applications along with standards and regulations, Risk Assessment: Theory, Methods, and Applications serves as a comprehensive introduction to the topic. The book serves as a practical guide to current risk analysis and risk assessment, emphasizing the possibility of sudden, major accidents across various areas of practice from machinery and manufacturing processes to nuclear power plants and transportation systems. The author applies a uniform framework to the discussion of each method, setting forth clear objectives and descriptions, while also shedding light on applications, essential resources, and advantages and disadvantages. Following an introduction that provides an overview of risk assessment, the book is organized into two sections that outline key theory, methods, and applications. * Introduction to Risk Assessment defines key concepts and details the steps of a thorough risk assessment along with the necessary quantitative risk measures. Chapters outline...

  5. Risk Analysis of Reservoir Flood Routing Calculation Based on Inflow Forecast Uncertainty

    Directory of Open Access Journals (Sweden)

    Binquan Li

    2016-10-01

    Full Text Available Possible risks in reservoir flood control and regulation cannot be objectively assessed by deterministic flood forecasts, resulting in the probability of reservoir failure. We demonstrated a risk analysis of reservoir flood routing calculation accounting for inflow forecast uncertainty in a sub-basin of Huaihe River, China. The Xinanjiang model was used to provide deterministic flood forecasts, and was combined with the Hydrologic Uncertainty Processor (HUP to quantify reservoir inflow uncertainty in the probability density function (PDF form. Furthermore, the PDFs of reservoir water level (RWL and the risk rate of RWL exceeding a defined safety control level could be obtained. Results suggested that the median forecast (50th percentiles of HUP showed better agreement with observed inflows than the Xinanjiang model did in terms of the performance measures of flood process, peak, and volume. In addition, most observations (77.2% were bracketed by the uncertainty band of 90% confidence interval, with some small exceptions of high flows. Results proved that this framework of risk analysis could provide not only the deterministic forecasts of inflow and RWL, but also the fundamental uncertainty information (e.g., 90% confidence band for the reservoir flood routing calculation.

  6. The utility of absolute risk prediction using FRAX® and Garvan Fracture Risk Calculator in daily practice.

    Science.gov (United States)

    van Geel, Tineke A C M; Eisman, John A; Geusens, Piet P; van den Bergh, Joop P W; Center, Jacqueline R; Dinant, Geert-Jan

    2014-02-01

    There are two commonly used fracture risk prediction tools FRAX(®) and Garvan Fracture Risk Calculator (GARVAN-FRC). The objective of this study was to investigate the utility of these tools in daily practice. A prospective population-based 5-year follow-up study was conducted in ten general practice centres in the Netherlands. For the analyses, the FRAX(®) and GARVAN-FRC 10-year absolute risks (FRAX(®) does not have 5-year risk prediction) for all fractures were used. Among 506 postmenopausal women aged ≥60 years (mean age: 67.8±5.8 years), 48 (9.5%) sustained a fracture during follow-up. Both tools, using BMD values, distinguish between women who did and did not fracture (10.2% vs. 6.8%, respectively for FRAX(®) and 32.4% vs. 39.1%, respectively for GARVAN-FRC, pbetter for women who sustained a fracture (higher sensitivity) and FRAX(®) for women who did not sustain a fracture (higher specificity). Similar results were obtained using age related cut off points. The discriminant value of both models is at least as good as models used in other medical conditions; hence they can be used to communicate the fracture risk to patients. However, given differences in the estimated risks between FRAX(®) and GARVAN-FRC, the significance of the absolute risk must be related to country-specific recommended intervention thresholds to inform the patient. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  7. Hair 2010 Documentation: Calculating risk indicators related to agricultural use of pesticides within the European Union

    NARCIS (Netherlands)

    Kruijne, R.; Deneer, J.W.; Lahr, J.; Vlaming, J.

    2011-01-01

    The HAIR instrument calculates risk indicators related to the agricultural use of pesticides in EU Member States. HAIR combines databases and models for calculating potential environmental environmental effects expressed by the exposure toxicity ratio.

  8. Facts and values in risk assessment

    International Nuclear Information System (INIS)

    Cross, Frank B.

    1998-01-01

    Risk, as commonly understood, is a complex melange of facts, values, and fears. While this complexity of public risk perception is now broadly recognized, its implications are insufficiently explored. Public risk perceptions offer p poor guide for public policymaking. Popular assessments of risk are tainted by misinformation and unreliable heuristics. While subjective considerations, often called values, play a role in public perception of risk, those 'values' are often inappropriate for government decisionmaking. Reliance on public perceptions of risk means more premature deaths. Public risk perception also is systematically skewed contrary to the interests of the disadvantaged. Strict probabilistic risk measures generally provide a superior guide for government regulatory policy

  9. Life Cycle Assessment and Risk Assessment

    DEFF Research Database (Denmark)

    Olsen, Stig Irving

    Life Cycle Assessment (LCA) is a tool for environmental assessment of product and systems – over the whole life cycle from acquisition of raw materials to the end-of-life of the product – and encompassing all environmental impacts of emissions and resource usage, e.g. global warming, acidification...... cycle. The models for assessing toxic impacts in LCA are to a large extent based on those developed for RA, e.g. EUSES, and require basic information about the inherent properties of the emissions like solubility, LogKow,ED50 etc. Additionally, it is a prerequisite to know how to characterize...

  10. Modeling for operational event risk assessment

    International Nuclear Information System (INIS)

    Sattison, M.B.

    1997-01-01

    The U.S. Nuclear Regulatory Commission has been using risk models to evaluate the risk significance of operational events in U.S. commercial nuclear power plants for more seventeen years. During that time, the models have evolved in response to the advances in risk assessment technology and insights gained with experience. Evaluation techniques fall into two categories, initiating event assessments and condition assessments. The models used for these analyses have become uniquely specialized for just this purpose

  11. Risk Assessment in the Maritime Industry

    Directory of Open Access Journals (Sweden)

    M. Mousavi

    2017-02-01

    Full Text Available Risk assessment is a well-developed field which many operators are currently applying to improve their operations and reduce their risk exposure. This paper is intended to provide an overview of the risk assessment for mariners in the Maritime transportation. The risks addressed are primarily those affecting the safety of a vessel, facility or operation. The concept of risk is defined, and the methods available to assess the risks associated with an operation are described. Regulatory requirements that have prompted the development of modern risk assessment practices are described, and future regulatory trends are discussed. There are many different analysis techniques and models that have been developed to aid in conducting risk assessments. A key to any successful risk analysis is choosing the right method (or combination of methods for the situation at hand. This is achieved through critical analysis of the available data concerning marine crises. This paper provides a brief introduction to some of the analysis methods available and suggests risk analysis approaches to support different types of decision making within the maritime transportation to cope with crises. Finally, as awareness of risk assessment increases, the benefits which can be realized through its application will continue to increase. Organizations in both the public and the private sector are becoming more and more familiar with the benefits associated with risk-based approaches to managing safety and consequently reducing crisis in maritime transportation.

  12. First-trimester risk calculation for trisomy 13, 18, and 21: comparison of the screening efficiency between 2 locally developed programs and commercial software

    DEFF Research Database (Denmark)

    Sørensen, Steen; Momsen, Günther; Sundberg, Karin

    2011-01-01

    -A) in maternal plasma from unaffected pregnancies. Means and SDs of these parameters in unaffected and affected pregnancies are used in the risk calculation program. Unfortunately, our commercial program for risk calculation (Astraia) did not allow use of local medians. We developed 2 alternative risk...... calculation programs to assess whether the screening efficacies for T13, T18, and T21 could be improved by using our locally estimated medians....

  13. RELEVANCE OF PROCESS RISK ASSESSMENT IN AIRLINES

    Directory of Open Access Journals (Sweden)

    Oksana G. Feoktistova

    2017-01-01

    Full Text Available The notion of “the concept on assumed risk” that took over from the outdated concept of absolute security is analyzed, the increasing significance of operating risk assessment at the present stage is noted. Some basic risk assessment techniques are considered. Matrix technique of risk assessment is considered more thoroughly, and it may be used in risk assessment of airlines in the context of labour protection management system.The ability to correctly assess risks and develop appropriate precautionary measures will allow airlines to avoid incidents leading to drastic consequences for staff, as well as to direct and indirect costs for the enterprise among which there could be singled out both direct property damage and loss of profit and expenses connected to incident investigation, penalty and compensation payment, loss of business reputation and so on. To reduce the rate of accidents and to develop safe activities skills for airlines staff a risk assessment chart is supposed to be implemented, which will be an efficient accidents prevention involving the staff in the process and making them follow safe working conditions.Process risk assessment is an integral part of assessment of the whole enterprise activity and work efficiency of a department and particular workers evaluation system. Labour protection activity should be based on risk identification and its control. Risk assessment is a keystone of labour protection activity planning.

  14. Advanced Test Reactor outage risk assessment

    International Nuclear Information System (INIS)

    Thatcher, T.A.; Atkinson, S.A.

    1997-01-01

    Beginning in 1997, risk assessment was performed for each Advanced Test Reactor (ATR) outage aiding the coordination of plant configuration and work activities (maintenance, construction projects, etc.) to minimize the risk of reactor fuel damage and to improve defense-in-depth. The risk assessment activities move beyond simply meeting Technical Safety Requirements to increase the awareness of risk sensitive configurations, to focus increased attention on the higher risk activities, and to seek cost-effective design or operational changes that reduce risk. A detailed probabilistic risk assessment (PRA) had been performed to assess the risk of fuel damage during shutdown operations including heavy load handling. This resulted in several design changes to improve safety; however, evaluation of individual outages had not been performed previously and many risk insights were not being utilized in outage planning. The shutdown PRA provided the necessary framework for assessing relative and absolute risk levels and assessing defense-in-depth. Guidelines were written identifying combinations of equipment outages to avoid. Screening criteria were developed for the selection of work activities to receive review. Tabulation of inherent and work-related initiating events and their relative risk level versus plant mode has aided identification of the risk level the scheduled work involves. Preoutage reviews are conducted and post-outage risk assessment is documented to summarize the positive and negative aspects of the outage with regard to risk. The risk for the outage is compared to the risk level that would result from optimal scheduling of the work to be performed and to baseline or average past performance

  15. Metal Vapor Arcing Risk Assessment Tool

    Science.gov (United States)

    Hill, Monika C.; Leidecker, Henning W.

    2010-01-01

    The Tin Whisker Metal Vapor Arcing Risk Assessment Tool has been designed to evaluate the risk of metal vapor arcing and to help facilitate a decision toward a researched risk disposition. Users can evaluate a system without having to open up the hardware. This process allows for investigating components at risk rather than spending time and money analyzing every component. The tool points to a risk level and provides direction for appropriate action and documentation.

  16. Energy and environment: Risk assessment

    International Nuclear Information System (INIS)

    Colombo, U.

    1993-01-01

    Two problems connected to the concept of 'risk' were analyzed: nuclear power production and global climate changes. In fact, nuclear power, despite of the risk management of the plants, does not produce gaseous emissions and can be used to reduce environmental risks. Even if a cost benefit analysis of nuclear power is very difficult, to perform it is author's opinion that, very probably, industrial countries will continue to use this form of energy

  17. CEA: risk management assessment 2011

    International Nuclear Information System (INIS)

    Bigot, Bernard; Bonnevie, Edwige; Maillot, Bernard

    2012-01-01

    This report proposes a qualitative and quantitative overview of CEA activities in the field of risk management during 2011. These activities concerned the impact on the environment, the safety of installations, the management of professional risks (safety and health at work), the radiological protection of workers, the transports of hazardous materials, waste management, protection of sites, installations and heritage, the management of emergency situations, the management of law risks, controls and audits

  18. Calculating background levels for ecological risk parameters in toxic harbor sediment

    Science.gov (United States)

    Leadon, C.J.; McDonnell, T.R.; Lear, J.; Barclift, D.

    2007-01-01

    Establishing background levels for biological parameters is necessary in assessing the ecological risks from harbor sediment contaminated with toxic chemicals. For chemicals in sediment, the term contaminated is defined as having concentrations above background and significant human health or ecological risk levels. For biological parameters, a site could be considered contaminated if levels of the parameter are either more or less than the background level, depending on the specific parameter. Biological parameters can include tissue chemical concentrations in ecological receptors, bioassay responses, bioaccumulation levels, and benthic community metrics. Chemical parameters can include sediment concentrations of a variety of potentially toxic chemicals. Indirectly, contaminated harbor sediment can impact shellfish, fish, birds, and marine mammals, and human populations. This paper summarizes the methods used to define background levels for chemical and biological parameters from a survey of ecological risk investigations of marine harbor sediment at California Navy bases. Background levels for regional biological indices used to quantify ecological risks for benthic communities are also described. Generally, background stations are positioned in relatively clean areas exhibiting the same physical and general chemical characteristics as nearby areas with contaminated harbor sediment. The number of background stations and the number of sample replicates per background station depend on the statistical design of the sediment ecological risk investigation, developed through the data quality objective (DQO) process. Biological data from the background stations can be compared to data from a contaminated site by using minimum or maximum background levels or comparative statistics. In Navy ecological risk assessments (ERA's), calculated background levels and appropriate ecological risk screening criteria are used to identify sampling stations and sites with contaminated

  19. CEA - 2014 risk management assessment

    International Nuclear Information System (INIS)

    Bonnevie, Edwige; Verwaerde, Daniel; Maillot, Bernard

    2015-06-01

    After introducing presentations of CEA managers in charge of risk management and controls, this document presents and comments the actions undertaken by the CEA and the obtained results in terms of risk management in different fields: protection and control of the environment, installation safety, health, safety and radiation protection, transport of hazardous materials, waste management, protection of sites, installations and heritage, management of emergency situations, management of legal risks, internal audits and controls. Other topics are addressed like the presentation of the risk management department, and the role of the CEA in the relationship between research and industry

  20. Risk assessment and risk transfer from an insurerś point of view

    Science.gov (United States)

    Ebner, G.

    2009-04-01

    Risk, a word that causes a lot of associations in human brains. Many of us don't like risks. Since hundreds of years insurance is the most common way to get rid of the financial consequences when risks convert to damages. This article deals with commercial risks and the possibilities of risk transfer, an important task within the field of risk management. For commercial entities it is very important to transfer risks, threatening the competitiveness or even worse the existence of a company. At the beginning of insurance it was more the less a bet between merchants and rich people. Later on mutual societies were taking place. Today we see a complex insurance industry with insurers, reinsurers, self insuring possibilities via captives and much more. This complex system, with all the different ways to deal with risk transfer requires a professional risk assessment! Risk assessment is based on knowledge about the threatened assets, the likelihood that they will be damaged, the threats and the possibilities to protect these assets. Assets may be tangible or intangible. Assessing risks is not a precise calculation that delivers a result without any doubt. But insurers and insured need a basis to fix a premium, both of them can agree. This contribution will present a system to assess risks and to find the right risk-transfer-premiums.

  1. Environmental Comparative Risk Assessment: A Case Study

    International Nuclear Information System (INIS)

    Ali, M.M.

    2007-01-01

    Health and environmental impacts associated with energy production and industrial activities as well as food production and agricultural activities have had great concern in the last decades. Early activities emerged in late 80s of the last century through an Inter- Agency project (lAEA, UNDY, WHO, ... ) on the comparative risk assessment from energy systems and industrial complexes. A work-shop on Risk Assessment and Management in large industrial areas was held in Alexandria Egypt on 20-33 Det 1993, sponsored by IAEA. Several conferences, experts work groups and workshops were held there of Recent trends in determining risks are: 1. Use of probabilistic risk assessment approach to identify hazardous activities and accident scenario. 2. development of data base on failure probabilities and appropriate physical models. 3. Development of related directives and regulations and criteria Comparative risk assessment case study as a tool for comparing risk is emphasized Criteria of exposure to human and ecological risks are addressed

  2. A Probabilistic Risk Assessment For Emergency Preparedness

    International Nuclear Information System (INIS)

    Lee, Joomyung; Jae, Moosung; Ahn, Kwangil

    2013-01-01

    The importance of nuclear power plant PSA has grown up all over the world due to this incident. The main concern of this study is to develop a methodology to carry on an emergency preparedness evaluation and to set an exclusive area, or the emergency response area boundary in order to apply it to domestic reference plants. This study also focuses on evaluating the risk parameter of major nuclides through a sensitivity analysis and a safety assessment by calculating the population dose, early fatality, and cancer fatality rates. A methodology for an emergency preparedness, which can be applied to evaluate the damage of the radioactive release as well as to assess the safety of the accident scenario of a nuclear power plant, has been developed and applied for the reference plants in Korea. By applying a source term analysis, an exclusive zone based on the radioactive dose is obtained. And the results of the health effect assessment based on the release fraction of specific nuclides to public with an effective emergency response activity have been simulated. A methodology utilizing the Level 3 PSA with the actual emergency response activities has been developed and applied to typical nuclear accident situations. The plausible standard for performing an emergency plan is suggested and the valuable information regarding emergency preparedness has been produced in this study. For further works, the sensitivity study on important parameters will be performed to simulate the actual severe accident situations such as sheltering, evacuation, and emergency response activities

  3. Radiological risk assessment of environmental radon

    Energy Technology Data Exchange (ETDEWEB)

    Khalid, Norafatin; Majid, Amran Ab; Yahaya, Redzuwan; Yasir, Muhammad Samudi [Nuclear Science Programme, School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Darul Ehsan (Malaysia)

    2013-11-27

    Measurements of radon gas ({sup 222}Rn) in the environmental are important to assess indoor air quality and to study the potential risk to human health. Generally known that exposure to radon is considered the second leading cause of lung cancer after smoking. The environmental radon concentration depends on the {sup 226}Ra concentration, indoor atmosphere, cracking on rocks and building materials. This study was carried out to determine the indoor radon concentration from selected samples of tin tailings (amang) and building materials in an airtight sealed homemade radon chamber. The radiological risk assessment for radon gas was also calculated based on the annual exposure dose, effective dose equivalent, radon exhalation rates and fatal cancer risk. The continuous radon monitor Sun Nuclear model 1029 was used to measure the radon concentration emanates from selected samples for 96 hours. Five types of tin tailings collected from Kampar, Perak and four samples of building materials commonly used in Malaysia dwellings or building constructions were analysed for radon concentration. The indoor radon concentration determined in ilmenite, monazite, struverite, xenotime and zircon samples varies from 219.6 ± 76.8 Bq m{sup −3} to 571.1 ± 251.4 Bq m{sup −3}, 101.0 ± 41.0 Bq m{sup −3} to 245.3 ± 100.2 Bq m{sup −3}, 53.1 ± 7.5 Bq m{sup −3} to 181.8 ± 9.7 Bq m{sup −3}, 256.1 ± 59.3 Bq m{sup −3} to 652.2 ± 222.2 Bq m{sup −3} and 164.5 ± 75.9 Bq m{sup −3} to 653.3 ± 240.0 Bq m{sup −3}, respectively. Whereas, in the building materials, the radon concentration from cement brick, red-clay brick, gravel aggregate and cement showed 396.3 ± 194.3 Bq m{sup −3}, 192.1 ± 75.4 Bq m{sup −3}, 176.1 ± 85.9 Bq m{sup −3} and 28.4 ± 5.7 Bq m{sup −3}, respectively. The radon concentration in tin tailings and building materials were found to be much higher in xenotime and cement brick samples than others. All samples in tin tailings were exceeded the

  4. Revised Human Health Risk Assessment on Chlorpyrifos

    Science.gov (United States)

    We have revised our human health risk assessment and drinking water exposure assessment for chlorpyrifos that supported our October 2015 proposal to revoke all food residue tolerances for chlorpyrifos. Learn about the revised analysis.

  5. Quantitative Microbial Risk Assessment Tutorial - Primer

    Science.gov (United States)

    This document provides a Quantitative Microbial Risk Assessment (QMRA) primer that organizes QMRA tutorials. The tutorials describe functionality of a QMRA infrastructure, guide the user through software use and assessment options, provide step-by-step instructions for implementi...

  6. Randomized Controlled Trial of an Educational Intervention Using an Online Risk Calculator for Knee Osteoarthritis: Effect on Risk Perception.

    Science.gov (United States)

    Losina, Elena; Michl, Griffin L; Smith, Karen C; Katz, Jeffrey N

    2017-08-01

    Young adults, in general, are not aware of their risk of knee osteoarthritis (OA). Understanding risk and risk factors is critical to knee OA prevention. We tested the efficacy of a personalized risk calculator on accuracy of knee OA risk perception and willingness to change behaviors associated with knee OA risk factors. We conducted a randomized controlled trial of 375 subjects recruited using Amazon Mechanical Turk. Subjects were randomized to either use a personalized risk calculator based on demographic and risk-factor information (intervention), or to view general OA risk information (control). At baseline and after the intervention, subjects estimated their 10-year and lifetime risk of knee OA and responded to contemplation ladders measuring willingness to change diet, exercise, or weight-control behaviors. Subjects in both arms had an estimated 3.6% 10-year and 25.3% lifetime chance of developing symptomatic knee OA. Both arms greatly overestimated knee OA risk at baseline, estimating a 10-year risk of 26.1% and a lifetime risk of 47.8%. After the intervention, risk calculator subjects' perceived 10-year risk decreased by 12.9 percentage points to 12.5% and perceived lifetime risk decreased by 19.5 percentage points to 28.1%. Control subjects' perceived risks remained unchanged. Risk calculator subjects were more likely to move to an action stage on the exercise contemplation ladder (relative risk 2.1). There was no difference between the groups for diet or weight-control ladders. The risk calculator is a useful intervention for knee OA education and may motivate some exercise-related behavioral change. © 2016, American College of Rheumatology.

  7. Assessing reservoir operations risk under climate change

    Science.gov (United States)

    Brekke, L.D.; Maurer, E.P.; Anderson, J.D.; Dettinger, M.D.; Townsley, E.S.; Harrison, A.; Pruitt, T.

    2009-01-01

    Risk-based planning offers a robust way to identify strategies that permit adaptive water resources management under climate change. This paper presents a flexible methodology for conducting climate change risk assessments involving reservoir operations. Decision makers can apply this methodology to their systems by selecting future periods and risk metrics relevant to their planning questions and by collectively evaluating system impacts relative to an ensemble of climate projection scenarios (weighted or not). This paper shows multiple applications of this methodology in a case study involving California's Central Valley Project and State Water Project systems. Multiple applications were conducted to show how choices made in conducting the risk assessment, choices known as analytical design decisions, can affect assessed risk. Specifically, risk was reanalyzed for every choice combination of two design decisions: (1) whether to assume climate change will influence flood-control constraints on water supply operations (and how), and (2) whether to weight climate change scenarios (and how). Results show that assessed risk would motivate different planning pathways depending on decision-maker attitudes toward risk (e.g., risk neutral versus risk averse). Results also show that assessed risk at a given risk attitude is sensitive to the analytical design choices listed above, with the choice of whether to adjust flood-control rules under climate change having considerably more influence than the choice on whether to weight climate scenarios. Copyright 2009 by the American Geophysical Union.

  8. Establishing a family risk assessment clinic for breast cancer.

    LENUS (Irish Health Repository)

    Mulsow, Jurgen

    2012-02-01

    Breast cancer is the most common cancer affecting European women and the leading cause of cancer-related death. A total of 15-20% of women who develop breast cancer have a family history and 5-10% a true genetic predisposition. The identification and screening of women at increased risk may allow early detection of breast cancer and improve prognosis. We established a family risk assessment clinic in May 2005 to assess and counsel women with a family history of breast cancer, to initiate surveillance, and to offer risk-reducing strategies for selected high-risk patients. Patients at medium or high risk of developing breast cancer according to NICE guidelines were accepted. Family history was determined by structured questionnaire and interview. Lifetime risk of developing breast cancer was calculated using Claus and Tyrer-Cuzick scoring. Risk of carrying a breast cancer-related gene mutation was calculated using the Manchester system. One thousand two hundred and forty-three patients have been referred. Ninety-two percent were at medium or high risk of developing breast cancer. Formal assessment of risk has been performed in 368 patients, 73% have a high lifetime risk of developing breast cancer, and 72% a Manchester score >or=16. BRCA1\\/2 mutations have been identified in 14 patients and breast cancer diagnosed in two. Our initial experience of family risk assessment has shown there to be a significant demand for this service. Identification of patients at increased risk of developing breast cancer allows us to provide individuals with accurate risk profiles, and enables patients to make informed choices regarding their follow-up and management.

  9. Cardiovascular risk calculation | Ker | South African Family Practice

    African Journals Online (AJOL)

    Cardiovascular disease remains a major cause of global mortality and morbidity. Atherosclerosis is the main underlying cause in the majority of cardiovascular disease events. Traditional independent risk factors for car diovascular disease include age, abnormal lipid levels, elevated blood pressure, smoking and elevated ...

  10. Risk calculation for hyperkalaemia in heart failure patients.

    NARCIS (Netherlands)

    Vereijken, T.L.; Bellersen, L.; Groenewoud, J.M.M.; Knubben, L.; Baltussen, L.; Kramers, C.

    2007-01-01

    BACKGROUND: We aimed to develop a model to estimate the risk of hyperkalaemia in patients treated for heart failure in a tertiary reference hospital and to identify precipitating factors. METHODS: 125 congestive heart failure (CHF) patients were studied retrospectively. Thirty of these patients

  11. Predicting complication risk in spine surgery: a prospective analysis of a novel risk assessment tool.

    Science.gov (United States)

    Veeravagu, Anand; Li, Amy; Swinney, Christian; Tian, Lu; Moraff, Adrienne; Azad, Tej D; Cheng, Ivan; Alamin, Todd; Hu, Serena S; Anderson, Robert L; Shuer, Lawrence; Desai, Atman; Park, Jon; Olshen, Richard A; Ratliff, John K

    2017-07-01

    OBJECTIVE The ability to assess the risk of adverse events based on known patient factors and comorbidities would provide more effective preoperative risk stratification. Present risk assessment in spine surgery is limited. An adverse event prediction tool was developed to predict the risk of complications after spine surgery and tested on a prospective patient cohort. METHODS The spinal Risk Assessment Tool (RAT), a novel instrument for the assessment of risk for patients undergoing spine surgery that was developed based on an administrative claims database, was prospectively applied to 246 patients undergoing 257 spinal procedures over a 3-month period. Prospectively collected data were used to compare the RAT to the Charlson Comorbidity Index (CCI) and the American College of Surgeons National Surgery Quality Improvement Program (ACS NSQIP) Surgical Risk Calculator. Study end point was occurrence and type of complication after spine surgery. RESULTS The authors identified 69 patients (73 procedures) who experienced a complication over the prospective study period. Cardiac complications were most common (10.2%). Receiver operating characteristic (ROC) curves were calculated to compare complication outcomes using the different assessment tools. Area under the curve (AUC) analysis showed comparable predictive accuracy between the RAT and the ACS NSQIP calculator (0.670 [95% CI 0.60-0.74] in RAT, 0.669 [95% CI 0.60-0.74] in NSQIP). The CCI was not accurate in predicting complication occurrence (0.55 [95% CI 0.48-0.62]). The RAT produced mean probabilities of 34.6% for patients who had a complication and 24% for patients who did not (p = 0.0003). The generated predicted values were stratified into low, medium, and high rates. For the RAT, the predicted complication rate was 10.1% in the low-risk group (observed rate 12.8%), 21.9% in the medium-risk group (observed 31.8%), and 49.7% in the high-risk group (observed 41.2%). The ACS NSQIP calculator consistently

  12. Environmental risk assessment system for phosphogypsum tailing dams.

    Science.gov (United States)

    Sun, Xin; Ning, Ping; Tang, Xiaolong; Yi, Honghong; Li, Kai; Zhou, Lianbi; Xu, Xianmang

    2013-01-01

    This paper may be of particular interest to the readers as it provides a new environmental risk assessment system for phosphogypsum tailing dams. In this paper, we studied the phosphogypsum tailing dams which include characteristics of the pollution source, environmental risk characteristics and evaluation requirements to identify the applicable environmental risk assessment methods. Two analytical methods, that is, the analytic hierarchy process (AHP) and fuzzy logic, were used to handle the complexity of the environmental and nonquantitative data. Using our assessment method, different risk factors can be ranked according to their contributions to the environmental risk, thereby allowing the calculation of their relative priorities during decision making. Thus, environmental decision-makers can use this approach to develop alternative management strategies for proposed, ongoing, and completed PG tailing dams.

  13. Risk assessment basis for WWER-440 spent nuclear fuel

    International Nuclear Information System (INIS)

    Lascek, M.; Necas, V.; Darilek, P.

    2000-01-01

    The most problematic part of nuclear fuel cycle is its back end. Various high level waste management are available or under development (final disposal of spent assemblies in deep repository, reprocessing, partitioning, transmutation,...). Application of any method is connected with production of characteristic high level waste (amount, radio-toxicity, form,...) as well as various risk level for the environment and mankind. Strategy selection should be based on risk analysis also. The paper deals with assessment of risk, that is associated with WWER-440 spent fuel inventory. In order to evaluate the risk, the accumulated amount of the radioactive inventory is calculated and the decay of the long-lived radionuclides is computed by ORIGEN code. Analysis is oriented on calculation of hazard indexes for assessing the relative hazards of actinides, toxic and long-lived radionuclides. (Authors)

  14. A Risk Assessment System with Automatic Extraction of Event Types

    Science.gov (United States)

    Capet, Philippe; Delavallade, Thomas; Nakamura, Takuya; Sandor, Agnes; Tarsitano, Cedric; Voyatzi, Stavroula

    In this article we describe the joint effort of experts in linguistics, information extraction and risk assessment to integrate EventSpotter, an automatic event extraction engine, into ADAC, an automated early warning system. By detecting as early as possible weak signals of emerging risks ADAC provides a dynamic synthetic picture of situations involving risk. The ADAC system calculates risk on the basis of fuzzy logic rules operated on a template graph whose leaves are event types. EventSpotter is based on a general purpose natural language dependency parser, XIP, enhanced with domain-specific lexical resources (Lexicon-Grammar). Its role is to automatically feed the leaves with input data.

  15. Assessing the reliability of calculated catalytic ammonia synthesis rates

    DEFF Research Database (Denmark)

    Medford, Andrew James; Wellendorff, Jess; Vojvodic, Aleksandra

    2014-01-01

    We introduce a general method for estimating the uncertainty in calculated materials properties based on density functional theory calculations. We illustrate the approach for a calculation of the catalytic rate of ammonia synthesis over a range of transition-metal catalysts. The correlation...... between errors in density functional theory calculations is shown to play an important role in reducing the predicted error on calculated rates. Uncertainties depend strongly on reaction conditions and catalyst material, and the relative rates between different catalysts are considerably better described...

  16. Information security risk assessment, aggregation, and mitigation

    NARCIS (Netherlands)

    Lenstra, A.K.; Voss, T.; Wang, H.; Pieprzyk, J.; Varadharajan, V.

    2004-01-01

    As part of their compliance process with the Basel 2 operational risk management requirements, banks must define how they deal with information security risk management. In this paper we describe work in progress on a new quantitative model to assess and aggregate information security risks that is

  17. Genetic toxicology and cancer risk assessment

    National Research Council Canada - National Science Library

    Choy, Wai Nang

    2001-01-01

    ... their risks to humans are obvious goals for the protection of public health. When exposure is unavoidable, an accurate estimation of human risk as a result of exposure is essential for making regulatory decisions. Quantitative cancer risk assessment is an intricate process that utilizes knowledge from many different scien...

  18. Bahia State, Brazil : Ariculture Sector Risk Assessment

    OpenAIRE

    Arias, Diego; Caballero, Jorge

    2015-01-01

    The present study is part of an effort by the World Bank and the State of Bahia to assess agriculture sector risks as a contribution to the strategic economic development and poverty reduction agenda of the state government. It is composed of two phases: an agricultural sector risk identification and prioritization (volume one) and a risk management strategy and action plan (volume two). T...

  19. Low-frequency fields - health risk assessment

    International Nuclear Information System (INIS)

    Bernhardt, J.

    1993-01-01

    The author briefly reviews the biological actions and effects of low-frequency fields, epidemiological studies and discusses health risks in detail. He describes the assessment principles of the International Commission on Non-ionizing Radiation Protection (ICNIRP), medical principles for risk assessment, determination of limits and thesholds, and aspects of prevention. This is supplemented to by several fables and literature list. (Uhe) [de

  20. Evaluation of a constipation risk assessment scale.

    Science.gov (United States)

    Zernike, W; Henderson, A

    1999-06-01

    This project was undertaken in order to evaluate the utility of a constipation risk assessment scale and the accompanying bowel management protocol. The risk assessment scale was primarily introduced to teach and guide staff in managing constipation when caring for patients. The intention of the project was to reduce the incidence of constipation in patients during their admission to hospital.

  1. Recovery in environmental risk assessment at EFSA

    NARCIS (Netherlands)

    Brock, T.C.M.

    2016-01-01

    EFSA performs environmental risk assessments (ERAs) for single potential stressors such as plant protection products, genetically modified organisms and feed additives and for invasive alien species that are harmful for plant health. In this risk assessment domain, the EFSA Scientific Committee

  2. Explaining probalistic risk assessment in common language

    International Nuclear Information System (INIS)

    Wong, J.W.

    1994-01-01

    Probabilistic human health risk assessment is explained in ordinary language using a hypothetical example and the ingestion equation from EPA's Risk Assessment Guidance for Superfund. A section on understanding probabilities and probability distributions used in a Monte Carlo simulation is included as well as an appendix showing the computer run and the technical assumptions behind it

  3. Aquatic Macrophyte Risk Assessment for Pesticides

    NARCIS (Netherlands)

    Maltby, L.; Arnold, D.; Arts, G.H.P.; Davies, J.; Heimbach, F.; Pickl, C.; Poulsen, V.

    2009-01-01

    Given the essential role that primary producers play in aquatic ecosystems, it is imperative that the potential risk of pesticides to the structure and functioning of aquatic plants is adequately assessed. This book discusses the assessment of the risk of pesticides with herbicidal activity to

  4. Hanford Site baseline risk assessment methodology

    International Nuclear Information System (INIS)

    1993-03-01

    This methodology has been developed to prepare human health and environmental evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act remedial investigations (RIs) and the Resource Conservation and Recovery Act facility investigations (FIs) performed at the Hanford Site pursuant to the Hanford Federal Facility Agreement and Consent Order referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies Site-specific risk assessment considerations and integrates them with approaches for evaluating human and environmental risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site

  5. Risk Assessment for an Unmanned Merchant Ship

    Directory of Open Access Journals (Sweden)

    Ø.J. Rødseth

    2015-09-01

    Full Text Available The MUNIN project is doing a feasibility study on an unmanned bulk carrier on an intercontinental voyage. To develop the technical and operational concepts, MUNIN has used a risk-based design method, based on the Formal Safety Analysis method which is also recommended by the International Mari-time Organization. Scenario analysis has been used to identify risks and to simplify operational scope. Systematic hazard identification has been used to find critical safety and security risks and how to address these. Technology and operational concept testing is using a hypothesis-based test method, where the hypotheses have been created as a result of the risk assessment. Finally, the cost-benefit assessment will also use results from the risk assessment. This paper describes the risk assessment method, some of the most important results and also describes how the results have been or will be used in the different parts of the project.

  6. Hanford Site Risk Assessment Methodology. Revision 3

    International Nuclear Information System (INIS)

    1995-05-01

    This methodology has been developed to prepare human health and ecological evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) remedial investigations (RI) and the Resource conservation and Recovery Act of 1976 (RCRA) facility investigations (FI) performed at the Hanford Site pursuant to the hanford Federal Facility Agreement and Consent Order (Ecology et al. 1994), referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies site-specific risk assessment considerations and integrates them with approaches for evaluating human and ecological risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site

  7. Cumulative Risk Assessment (CRA): transforming the way we assess health risks.

    Science.gov (United States)

    Williams, Pamela R D; Dotson, G Scott; Maier, Andrew

    2012-10-16

    Human health risk assessments continue to evolve and now focus on the need for cumulative risk assessment (CRA). CRA involves assessing the combined risk from coexposure to multiple chemical and nonchemical stressors for varying health effects. CRAs are broader in scope than traditional chemical risk assessments because they allow for a more comprehensive evaluation of the interaction between different stressors and their combined impact on human health. Future directions of CRA include greater emphasis on local-level community-based assessments; integrating environmental, occupational, community, and individual risk factors; and identifying and implementing common frameworks and risk metrics for incorporating multiple stressors.

  8. Development and Validation of a Clinically Based Risk Calculator for the Transdiagnostic Prediction of Psychosis

    Science.gov (United States)

    Rutigliano, Grazia; Stahl, Daniel; Davies, Cathy; Bonoldi, Ilaria; Reilly, Thomas; McGuire, Philip

    2017-01-01

    , Tenth Revision diagnoses showed a lower risk of psychosis, with the exception of bipolar mood disorders (similar risk) and brief psychotic episodes (higher risk). The ARMS designation accounted only for a small proportion of transitions to psychosis (n = 52 of 1001; 5.19% in the derivation data set), indicating the need for transdiagnostic prediction of psychosis in secondary mental health care. A prognostic risk stratification model based on preselected variables, including index diagnosis, age, sex, age by sex, and race/ethnicity, was developed and externally validated, showing good performance and potential clinical usefulness. Conclusions and Relevance This online individualized risk calculator can be of clinical usefulness for the transdiagnostic prediction of psychosis in secondary mental health care. The risk calculator can help to identify those patients at risk of developing psychosis who require an ARMS assessment and specialized care. The use of this calculator may eventually facilitate the implementation of an individualized provision of preventive focused interventions and improve outcomes of first episode psychosis. PMID:28355424

  9. The impact of using weight estimated from mammographic images vs. self-reported weight on breast cancer risk calculation

    Science.gov (United States)

    Nair, Kalyani P.; Harkness, Elaine F.; Gadde, Soujanye; Lim, Yit Y.; Maxwell, Anthony J.; Moschidis, Emmanouil; Foden, Philip; Cuzick, Jack; Brentnall, Adam; Evans, D. Gareth; Howell, Anthony; Astley, Susan M.

    2017-03-01

    Personalised breast screening requires assessment of individual risk of breast cancer, of which one contributory factor is weight. Self-reported weight has been used for this purpose, but may be unreliable. We explore the use of volume of fat in the breast, measured from digital mammograms. Volumetric breast density measurements were used to determine the volume of fat in the breasts of 40,431 women taking part in the Predicting Risk Of Cancer At Screening (PROCAS) study. Tyrer-Cuzick risk using self-reported weight was calculated for each woman. Weight was also estimated from the relationship between self-reported weight and breast fat volume in the cohort, and used to re-calculate Tyrer-Cuzick risk. Women were assigned to risk categories according to 10 year risk (below average =8%) and the original and re-calculated Tyrer-Cuzick risks were compared. Of the 716 women diagnosed with breast cancer during the study, 15 (2.1%) moved into a lower risk category, and 37 (5.2%) moved into a higher category when using weight estimated from breast fat volume. Of the 39,715 women without a cancer diagnosis, 1009 (2.5%) moved into a lower risk category, and 1721 (4.3%) into a higher risk category. The majority of changes were between below average and average risk categories (38.5% of those with a cancer diagnosis, and 34.6% of those without). No individual moved more than one risk group. Automated breast fat measures may provide a suitable alternative to self-reported weight for risk assessment in personalized screening.

  10. Ethical dimensions in assessing technical risks

    International Nuclear Information System (INIS)

    Birnbacher, D.

    1991-01-01

    Contrary to the present tendency of partially impact-independent technology assessment, the author does not see a difference between a risk-benefit analysis and an ethical technology assessment. As long as the risk-benefit analysis is truly comprehensive, both fall together. This does not mean that convictions of those who have their doubts about some new technologies, independently of impact assessments, may be disregarded in purely consequential risk evaluations. On the contrary, qualms of representatives of these principles, just as any other stable non-acceptance, have to be included as aggravating negative elements in technology assessments. (orig./HSCH) [de

  11. Quantified risk assessment - a nuclear industry viewpoint

    International Nuclear Information System (INIS)

    Thomson, J.R.

    1994-01-01

    This paper presents a brief summary of the methodology used for the assessment of risk arising from fuel handling and dismantling operations in advanced gas-cooled reactor power stations. The difficulties with and problems arising from such risk assessments are discussed. In particular, difficulties arise from (i) the onerous risk criteria that nuclear plants are expected to satisfy, (ii) the necessary complexity of the plant, (iii) the conflicting requirements for the fault consequence assessments to be bounding but not grossly pessimistic, and (iv) areas of fault frequency assessment which contain possibly subjective considerations such as software and common mode failure. (author)

  12. The evolution of violence risk assessment.

    Science.gov (United States)

    Monahan, John; Skeem, Jennifer L

    2014-10-01

    Many instruments have been published in recent years to improve the ability of mental health clinicians to estimate the likelihood that an individual will behave violently toward others. Increasingly, these instruments are being applied in response to laws that require specialized risk assessments. In this review, we present a framework that goes beyond the "clinical" and "actuarial" dichotomy to describe a continuum of structured approaches to risk assessment. Despite differences among them, there is little evidence that one instrument predicts violence better than another. We believe that these group-based instruments are useful for assessing an individual's risk, and that the instrument should be chosen based on the purpose of the assessment.

  13. On risk assessment of energy production

    International Nuclear Information System (INIS)

    Kunii, Katsuhiko

    2005-07-01

    Today we cannot ignore the risk of health and/or environment by energy production such as power generation since the risk has been made large enough. In this report an information survey has been done in order to know the outline and points of risk assessment. Based on the information of reports and literature about risk assessment, have been surveyed mainly the external cost assessment of power generation (in which quantification of health and/or environment risk has been done), in addition, risks of disasters, accidents, investments, finance etc. and impacts of those risks on social activities. The remarks obtained by the survey are as follows: 1) Some of external cost assessment of power generation show different results even if the assessment conditions of technology, site, etc. are mostly the same. It is necessary to remark on the information such as basic data, model, background, application limit of assessment considering the reliability. 2) Especially it is considered that the reliability of risk assessment is not enough at present because of the lack of basic data. (author)

  14. RISK MANAGEMENT: AN INTEGRATED APPROACH TO RISK MANAGEMENT AND ASSESSMENT

    OpenAIRE

    Szabo Alina

    2012-01-01

    Purpose: The objective of this paper is to offer an overview over risk management cycle by focusing on prioritization and treatment, in order to ensure an integrated approach to risk management and assessment, and establish the ‘top 8-12’ risks report within the organization. The interface with Internal Audit is ensured by the implementation of the scoring method to prioritize risks collected from previous generated risk report. Methodology/approach: Using evidence from other research in ...

  15. Predictive Modelling Risk Calculators and the Non Dialysis Pathway.

    Science.gov (United States)

    Robins, Jennifer; Katz, Ivor

    2013-04-16

    This guideline will review the current prediction models and survival/mortality scores available for decision making in patients with advanced kidney disease who are being considered for a non-dialysis treatment pathway. Risk prediction is gaining increasing attention with emerging literature suggesting improved patient outcomes through individualised risk prediction (1). Predictive models help inform the nephrologist and the renal palliative care specialists in their discussions with patients and families about suitability or otherwise of dialysis. Clinical decision making in the care of end stage kidney disease (ESKD) patients on a non-dialysis treatment pathway is currently governed by several observational trials (3). Despite the paucity of evidence based medicine in this field, it is becoming evident that the survival advantages associated with renal replacement therapy in these often elderly patients with multiple co-morbidities and limited functional status may be negated by loss of quality of life (7) (6), further functional decline (5, 8), increased complications and hospitalisations. This article is protected by copyright. All rights reserved.

  16. Approaches and methods of risk assessment

    International Nuclear Information System (INIS)

    Rowe, W.D.

    1983-01-01

    The classification system of risk assessment includes the categories: 1) risk comparisons, 2) cost-effectiveness of risk reduction, 3) balancing of costs, risks and benefits against one another, 4. Metasystems. An overview of methods and systems reveals that no single method can be applied to all cases and situations. The visibility of the process and the absolute consideration of all aspects of judging are, however, of first and fore most importance. (DG) [de

  17. TRECII: a computer program for transportation risk assessment

    International Nuclear Information System (INIS)

    Franklin, A.L.

    1980-05-01

    A risk-based fault tree analysis method has been developed at the Pacific Northwest Laboratory (PNL) for analysis of nuclear fuel cycle operations. This methodology was developed for the Department of Energy (DOE) as a risk analysis tool for evaluating high level waste management systems. A computer package consisting of three programs was written at that time to assist in the performance of risk assessment: ACORN (draws fault trees), MFAULT (analyzes fault trees), and RAFT (calculates risk). This methodology evaluates release consequences and estimates the frequency of occurrence of these consequences. This document describes an additional risk calculating code which can be used in conjunction with two of the three codes for transportation risk assessment. TRECII modifies the definition of risk used in RAFT (prob. x release) to accommodate release consequences in terms of fatalities. Throughout this report risk shall be defined as probability times consequences (fatalities are one possible health effect consequence). This methodology has been applied to a variety of energy material transportation systems. Typically the material shipped has been radioactive, although some adaptation to fossil fuels has occurred. The approach is normally applied to truck or train transport systems with some adaptation to pipelines and aircraft. TRECII is designed to be used primarily in conjunction with MFAULT; however, with a moderate amount of effort by the user, it can be implemented independent of the risk analysis package developed at PNL. Code description and user instructions necessary for the implementation of the TRECII program are provided

  18. Space Shuttle Probabilistic Risk Assessment (SPRA) Iteration 3.2

    Science.gov (United States)

    Boyer, Roger L.

    2010-01-01

    The Shuttle is a very reliable vehicle in comparison with other launch systems. Much of the risk posed by Shuttle operations is related to fundamental aspects of the spacecraft design and the environments in which it operates. It is unlikely that significant design improvements can be implemented to address these risks prior to the end of the Shuttle program. The model will continue to be used to identify possible emerging risk drivers and allow management to make risk-informed decisions on future missions. Potential uses of the SPRA in the future include: - Calculate risk impact of various mission contingencies (e.g. late inspection, crew rescue, etc.). - Assessing the risk impact of various trade studies (e.g. flow control valves). - Support risk analysis on mission specific events, such as in flight anomalies. - Serve as a guiding star and data source for future NASA programs.

  19. Risk assessment: A regional approach

    Energy Technology Data Exchange (ETDEWEB)

    Palecek, M [Occupational Safety Research Institute, Prague (Czech Republic)

    1992-07-01

    An assessment of the region of North Bohemia which suffered from forty years socialist economy and heavy emissions from German and Polish factories and power stations is presented. The case strongly underlines the need for regional and international cooperation both in the assessment of hazards and finding solution to public health and environmental problems.

  20. Risk assessment: A regional approach

    International Nuclear Information System (INIS)

    Palecek, M.

    1992-01-01

    An assessment of the region of North Bohemia which suffered from forty years socialist economy and heavy emissions from German and Polish factories and power stations is presented. The case strongly underlines the need for regional and international cooperation both in the assessment of hazards and finding solution to public health and environmental problems

  1. Risk-assessment methodology for fast breeder reactors

    International Nuclear Information System (INIS)

    Ott, K.O.

    1976-04-01

    The methods applied or proposed for risk assessment of nuclear reactors are reviewed, particularly with respect to their applicability for risk assessment of future commercial fast breeder reactors. All methods are based on the calculation of accident consequences for relatively few accident scenarios. The role and general impact of uncertainties in fast-reactor accident analysis are discussed. The discussion shows the need for improvement of the methodology. A generalized and improved risk-assessment methodology is outlined and proposed (accident-spectra-progression approach). The generalization consists primarily of an explicit treatment of uncertainties throughout the accident progression. The results of this method are obtained in form of consequence distributions. The width and shape of the distributions depend in part on the superposition of the uncertainties. The first moment of the consequence distribution gives an improved prediction of the ''average'' consequence. The higher-consequence moments can be used for consideration of risk aversion. The assessment of the risk of one or a certain number of nuclear reactors can only provide an ''isolated'' risk assessment. The general problem of safety risk assessment and its relation to public acceptance of certain modes of power production is a much broader problem area, which is also discussed

  2. Hazard classification or risk assessment

    DEFF Research Database (Denmark)

    Hass, Ulla

    2013-01-01

    The EU classification of substances for e.g. reproductive toxicants is hazard based and does not to address the risk suchsubstances may pose through normal, or extreme, use. Such hazard classification complies with the consumer's right to know. It is also an incentive to careful use and storage...

  3. Assessing the risks of nuclear energy

    International Nuclear Information System (INIS)

    Evans, Nigel

    1986-01-01

    The question how safe is safe is discussed. The way in which nuclear energy is presented in the context of the risks inherent in daily life is considered. Calculations based on actual reactor accidents (not Chernobyl) are then extrapolated for the proposed Sizewell-B reactor. Comparison is made between the risks of the nuclear industry and coal mining. Risk perception is considered and a risk index is constructed that allows for the fact that nuclear power continues to arouse public fear in spite of a good safety record. (UK)

  4. Defining Probability in Sex Offender Risk Assessment.

    Science.gov (United States)

    Elwood, Richard W

    2016-12-01

    There is ongoing debate and confusion over using actuarial scales to predict individuals' risk of sexual recidivism. Much of the debate comes from not distinguishing Frequentist from Bayesian definitions of probability. Much of the confusion comes from applying Frequentist probability to individuals' risk. By definition, only Bayesian probability can be applied to the single case. The Bayesian concept of probability resolves most of the confusion and much of the debate in sex offender risk assessment. Although Bayesian probability is well accepted in risk assessment generally, it has not been widely used to assess the risk of sex offenders. I review the two concepts of probability and show how the Bayesian view alone provides a coherent scheme to conceptualize individuals' risk of sexual recidivism.

  5. Risk assessment of carcinogens in food

    International Nuclear Information System (INIS)

    Barlow, Susan; Schlatter, Josef

    2010-01-01

    Approaches for the risk assessment of carcinogens in food have evolved as scientific knowledge has advanced. Early methods allowed little more than hazard identification and an indication of carcinogenic potency. Evaluation of the modes of action of carcinogens and their broad division into genotoxic and epigenetic (non-genotoxic, non-DNA reactive) carcinogens have played an increasing role in determining the approach followed and provide possibilities for more detailed risk characterisation, including provision of quantitative estimates of risk. Reliance on experimental animal data for the majority of risk assessments and the fact that human exposures to dietary carcinogens are often orders of magnitude below doses used in experimental studies has provided a fertile ground for discussion and diverging views on the most appropriate way to offer risk assessment advice. Approaches used by national and international bodies differ, with some offering numerical estimates of potential risks to human health, while others express considerable reservations about the validity of quantitative approaches requiring extrapolation of dose-response data below the observed range and instead offer qualitative advice. Recognising that qualitative advice alone does not provide risk managers with information on which to prioritise the need for risk management actions, a 'margin of exposure' approach for substances that are both genotoxic and carcinogenic has been developed, which is now being used by the World Health Organization and the European Food Safety Authority. This review describes the evolution of risk assessment advice on carcinogens and discusses examples of ways in which carcinogens in food have been assessed in Europe.

  6. Risk assessment of carcinogens in food.

    Science.gov (United States)

    Barlow, Susan; Schlatter, Josef

    2010-03-01

    Approaches for the risk assessment of carcinogens in food have evolved as scientific knowledge has advanced. Early methods allowed little more than hazard identification and an indication of carcinogenic potency. Evaluation of the modes of action of carcinogens and their broad division into genotoxic and epigenetic (non-genotoxic, non-DNA reactive) carcinogens have played an increasing role in determining the approach followed and provide possibilities for more detailed risk characterisation, including provision of quantitative estimates of risk. Reliance on experimental animal data for the majority of risk assessments and the fact that human exposures to dietary carcinogens are often orders of magnitude below doses used in experimental studies has provided a fertile ground for discussion and diverging views on the most appropriate way to offer risk assessment advice. Approaches used by national and international bodies differ, with some offering numerical estimates of potential risks to human health, while others express considerable reservations about the validity of quantitative approaches requiring extrapolation of dose-response data below the observed range and instead offer qualitative advice. Recognising that qualitative advice alone does not provide risk managers with information on which to prioritise the need for risk management actions, a "margin of exposure" approach for substances that are both genotoxic and carcinogenic has been developed, which is now being used by the World Health Organization and the European Food Safety Authority. This review describes the evolution of risk assessment advice on carcinogens and discusses examples of ways in which carcinogens in food have been assessed in Europe.

  7. Systems Toxicology: The Future of Risk Assessment.

    Science.gov (United States)

    Sauer, John Michael; Hartung, Thomas; Leist, Marcel; Knudsen, Thomas B; Hoeng, Julia; Hayes, A Wallace

    2015-01-01

    Risk assessment, in the context of public health, is the process of quantifying the probability of a harmful effect to individuals or populations from human activities. With increasing public health concern regarding the potential risks associated with chemical exposure, there is a need for more predictive and accurate approaches to risk assessment. Developing such an approach requires a mechanistic understanding of the process by which xenobiotic substances perturb biological systems and lead to toxicity. Supplementing the shortfalls of traditional risk assessment with mechanistic biological data has been widely discussed but not routinely implemented in the evaluation of chemical exposure. These mechanistic approaches to risk assessment have been generally referred to as systems toxicology. This Symposium Overview article summarizes 4 talks presented at the 35th Annual Meeting of the American College of Toxicology. © The Author(s) 2015.

  8. Risk assessment in support of plant health

    DEFF Research Database (Denmark)

    Jeger, Michael; Schans, Jan; Lövei, Gabor L.

    2012-01-01

    environmental risk assessment and the evaluation of risk reducing options. Quantitative approaches have become increasingly important during this time. The Panel has developed such methods in climatic mapping (in association with the Joint Research Councils), application of spatial spread models, re......With the establishment of the Plant Health Panel in 2006, EFSA became the body responsible for risk assessment in the plant health area for the European Union (EU). Since then more than 70 outputs have been produced dealing with the full range of organisms harmful to plant health across all crop...... types and plants in the environment. There has been an increasing trend towards producing scientific opinions which are full pest risk assessments for the whole EU territory. In its work, and as a contribution to the wider development of risk assessment methodology, the Panel has developed a series...

  9. Approaches to risk assessment in food allergy

    DEFF Research Database (Denmark)

    Madsen, Charlotte Bernhard; Hattersley, S.; Buck, J.

    2009-01-01

    modelling is considered to be the most promising approach for use in population risk assessment (which is a particular focus for risk managers). For all approaches, further improvement of input data is desirable, particularly data on consumption patterns/food choices in food allergic consumers, data...... models. The workshop concluded that all the three approaches to safety and risk assessment of allergenic foods should continue to be considered. A particular strength of the MoE and probabilistic approaches is that they do not rely on low-dose extrapolations with its inherent issues. Probabilistic......A workshop was organised to investigate whether risk assessment strategies and methodologies used in classical/conventional toxicology may be used for risk assessment of allergenic foods. to discuss the advantages and limitations of different approaches and to determine the research needed to move...

  10. PRA (Probabilistic Risk Assessments) Participation versus Validation

    Science.gov (United States)

    DeMott, Diana; Banke, Richard

    2013-01-01

    Probabilistic Risk Assessments (PRAs) are performed for projects or programs where the consequences of failure are highly undesirable. PRAs primarily address the level of risk those projects or programs posed during operations. PRAs are often developed after the design has been completed. Design and operational details used to develop models include approved and accepted design information regarding equipment, components, systems and failure data. This methodology basically validates the risk parameters of the project or system design. For high risk or high dollar projects, using PRA methodologies during the design process provides new opportunities to influence the design early in the project life cycle to identify, eliminate or mitigate potential risks. Identifying risk drivers before the design has been set allows the design engineers to understand the inherent risk of their current design and consider potential risk mitigation changes. This can become an iterative process where the PRA model can be used to determine if the mitigation technique is effective in reducing risk. This can result in more efficient and cost effective design changes. PRA methodology can be used to assess the risk of design alternatives and can demonstrate how major design changes or program modifications impact the overall program or project risk. PRA has been used for the last two decades to validate risk predictions and acceptability. Providing risk information which can positively influence final system and equipment design the PRA tool can also participate in design development, providing a safe and cost effective product.

  11. NASA Human System Risk Assessment Process

    Science.gov (United States)

    Francisco, D.; Romero, E.

    2016-01-01

    NASA utilizes an evidence based system to perform risk assessments for the human system for spaceflight missions. The center of this process is the multi-disciplinary Human System Risk Board (HSRB). The HSRB is chartered from the Chief Health and Medical Officer (OCHMO) at NASA Headquarters. The HSRB reviews all human system risks via an established comprehensive risk and configuration management plan based on a project management approach. The HSRB facilitates the integration of human research (terrestrial and spaceflight), medical operations, occupational surveillance, systems engineering and many other disciplines in a comprehensive review of human system risks. The HSRB considers all factors that influence human risk. These factors include pre-mission considerations such as screening criteria, training, age, sex, and physiological condition. In mission factors such as available countermeasures, mission duration and location and post mission factors such as time to return to baseline (reconditioning), post mission health screening, and available treatments. All of the factors influence the total risk assessment for each human risk. The HSRB performed a comprehensive review of all potential inflight medical conditions and events and over the course of several reviews consolidated the number of human system risks to 30, where the greatest emphasis is placed for investing program dollars for risk mitigation. The HSRB considers all available evidence from human research and, medical operations and occupational surveillance in assessing the risks for appropriate mitigation and future work. All applicable DRMs (low earth orbit for 6 and 12 months, deep space for 30 days and 1 year, a lunar mission for 1 year, and a planetary mission for 3 years) are considered as human system risks are modified by the hazards associated with space flight such as microgravity, exposure to radiation, distance from the earth, isolation and a closed environment. Each risk has a summary

  12. Enhancing the ecological risk assessment process.

    Science.gov (United States)

    Dale, Virginia H; Biddinger, Gregory R; Newman, Michael C; Oris, James T; Suter, Glenn W; Thompson, Timothy; Armitage, Thomas M; Meyer, Judith L; Allen-King, Richelle M; Burton, G Allen; Chapman, Peter M; Conquest, Loveday L; Fernandez, Ivan J; Landis, Wayne G; Master, Lawrence L; Mitsch, William J; Mueller, Thomas C; Rabeni, Charles F; Rodewald, Amanda D; Sanders, James G; van Heerden, Ivor L

    2008-07-01

    The Ecological Processes and Effects Committee of the US Environmental Protection Agency Science Advisory Board conducted a self-initiated study and convened a public workshop to characterize the state of the ecological risk assessment (ERA), with a view toward advancing the science and application of the process. That survey and analysis of ERA in decision making shows that such assessments have been most effective when clear management goals were included in the problem formulation; translated into information needs; and developed in collaboration with decision makers, assessors, scientists, and stakeholders. This process is best facilitated when risk managers, risk assessors, and stakeholders are engaged in an ongoing dialogue about problem formulation. Identification and acknowledgment of uncertainties that have the potential to profoundly affect the results and outcome of risk assessments also improves assessment effectiveness. Thus we suggest 1) through peer review of ERAs be conducted at the problem formulation stage and 2) the predictive power of risk-based decision making be expanded to reduce uncertainties through analytical and methodological approaches like life cycle analysis. Risk assessment and monitoring programs need better integration to reduce uncertainty and to evaluate risk management decision outcomes. Postdecision audit programs should be initiated to evaluate the environmental outcomes of risk-based decisions. In addition, a process should be developed to demonstrate how monitoring data can be used to reduce uncertainties. Ecological risk assessments should include the effects of chemical and nonchemical stressors at multiple levels of biological organization and spatial scale, and the extent and resolution of the pertinent scales and levels of organization should be explicitly considered during problem formulation. An approach to interpreting lines of evidence and weight of evidence is critically needed for complex assessments, and it would

  13. Current state of copper stabilizers and methodology towards calculating risk

    CERN Document Server

    Koratzinos, M

    2011-01-01

    The talk will start by reviewing the landscape: a brief mention of the results of the warm copper stabilizer measurements and the results of the splice measurements at cold will be shown. The preliminary results of the recent RRR measurements will then be presented. Then, together with the limits presented from talk no. 2, the probability of an incident will be presented for beam energies between 3.5 and 5TeV. The available methods at our disposal for addressing the limiting factors and operating at a higher energy will then be reviewed: a complete circuit qualification method coined the Thermal Amplifier can define the maximum safe energy of the LHC in case of a quench next to a defective joint. Ways of avoiding magnet quenches, another critical element of the analysis, for instance by optimizing BLM settings will then be shown. Finally, a proposal of a strategy for running at the highest possible energy compatible with a pre-defined level of risk will be presented. As a case study, the method will also be a...

  14. Probabilistic risk assessment of earthquakes at the Rocky Flats Plant and subsequent upgrade to reduce risk

    International Nuclear Information System (INIS)

    Day, S.A.

    1989-01-01

    An analysis to determine the risk associated with earthquakes at the Rocky Flats Plant was performed. Seismic analyses and structural evaluations were used to postulate building and equipment damage and radiological releases to the environment from various magnitudes of earthquakes. Dispersion modeling and dose assessment to the public were then calculated. The frequency of occurrence of various magnitudes of earthquakes were determined from the Department of Energy natural Phenomena Hazards Modeling Project. Risk to the public was probabilistically assessed for each magnitude of earthquake and for overall seismic risk. Based on the results of this Probabilistic Risk Assessment and a cost/benefit analysis, seismic upgrades are being implemented for several plutonium-handling facilities for the purpose of risk reduction

  15. Assessing the effect of electron density in photon dose calculations

    International Nuclear Information System (INIS)

    Seco, J.; Evans, P. M.

    2006-01-01

    Photon dose calculation algorithms (such as the pencil beam and collapsed cone, CC) model the attenuation of a primary photon beam in media other than water, by using pathlength scaling based on the relative mass density of the media to water. In this study, we assess if differences in the electron density between the water and media, with different atomic composition, can influence the accuracy of conventional photon dose calculations algorithms. A comparison is performed between an electron-density scaling method and the standard mass-density scaling method for (i) tissues present in the human body (such as bone, muscle, etc.), and for (ii) water-equivalent plastics, used in radiotherapy dosimetry and quality assurance. We demonstrate that the important material property that should be taken into account by photon dose algorithms is the electron density, and not the mass density. The mass-density scaling method is shown to overestimate, relative to electron-density predictions, the primary photon fluence for tissues in the human body and water-equivalent plastics, where 6%-7% and 10% differences were observed respectively for bone and air. However, in the case of patients, differences are expected to be smaller due to the large complexity of a treatment plan and of the patient anatomy and atomic composition and of the smaller thickness of bone/air that incident photon beams of a treatment plan may have to traverse. Differences have also been observed for conventional dose algorithms, such as CC, where an overestimate of the lung dose occurs, when irradiating lung tumors. The incorrect lung dose can be attributed to the incorrect modeling of the photon beam attenuation through the rib cage (thickness of 2-3 cm in bone upstream of the lung tumor) and through the lung and the oversimplified modeling of electron transport in convolution algorithms. In the present study, the overestimation of the primary photon fluence, using the mass-density scaling method, was shown

  16. Risk Assessment of Genetically Modified Microorganisms

    DEFF Research Database (Denmark)

    Jacobsen, B. L.; Wilcks, Andrea

    2001-01-01

    the industry, national administration and research institutions were gathered to discuss which elements should be considered in a risk assessment of genetically modified microorganisms used as food or food ingredients. The existing EU and national regulations were presented, together with the experiences......The rapid development of recombinant DNA techniques for food organisms urges for an ongoing discussion on the risk assessment of both new as traditional use of microorganisms in food production. This report, supported by the Nordic Council of Ministers, is the result of a workshop where people from...... with risk assessment of these organisms in each Nordic country....

  17. EPRI nuclear fuel-cycle accident risk assessment

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The present results of the nuclear fuel-cycle accident risk assessment conducted by the Electric Power Research Institute show that the total risk contribution of the nuclear fuel cycle is only approx. 1% of the accident risk of the power plant; hence, with little error, the accident risk of nuclear electric power is essentially that of the power plant itself. The power-plant risk, assuming a very large usage of nuclear power by the year 2005 is only approx. 0.5% of the radiological risk of natural background. The smallness of the fuel-cycle risk relative to the power-plant risk may be attributed to the lack of internal energy to drive an accident and the small amount of dispersible material. This work aims at a realistic assessment of the process hazards, the effectiveness of confinement and mitigation systems and procedures, and the associated likelihood of errors and the estimated size of errors. The primary probabilistic estimation tool is fault-tree analysis, with the release source terms calculated using physicochemical processes. Doses and health effects are calculated with CRAC (Consequences of Reactor Accident Code). No evacuation or mitigation is considered; source terms may be conservative through the assumption of high fuel burnup (40,000 MWd/t) and short cooling period (90 to 150 d); high-efficiency particulate air filter efficiencies are derived from experiments

  18. Assessment factors for human health risk assessment: A discussion paper

    NARCIS (Netherlands)

    Vermeire, T.; Stevenson, H.; Pieters, M.N.; Rennen, M.; Slob, W.; Hakkert, B.C.

    1999-01-01

    The general goal of this discussion paper is to contribute toward the further harmonization of human health risk assessment. It first discusses the development of a formal, harmonized set of assessment factors. The status quo with regard to assessment factors is reviewed, that is, the type of

  19. Assessment factors for human health risk assessment: a discussion paper

    NARCIS (Netherlands)

    Vermeire TG; Stevenson H; Pieters MN; Rennen M; Slob W; Hakkert BC; Nederlandse organisatie voor; CSR; LEO; TNO-ITV

    1998-01-01

    The general goal of this discussion paper is to contribute towards further harmonisation of the human health risk assessment. It discusses the development of a formal, harmonised set of default assessment factors. The status quo with regard to assessment factors is reviewed. Options are presented

  20. Subjective risk assessment for planning conservation projects

    International Nuclear Information System (INIS)

    Game, Edward T; Fitzsimons, James A; Lipsett-Moore, Geoff; McDonald-Madden, Eve

    2013-01-01

    Conservation projects occur under many types of uncertainty. Where this uncertainty can affect achievement of a project’s objectives, there is risk. Understanding risks to project success should influence a range of strategic and tactical decisions in conservation, and yet, formal risk assessment rarely features in the guidance or practice of conservation planning. We describe how subjective risk analysis tools can be framed to facilitate the rapid identification and assessment of risks to conservation projects, and how this information should influence conservation planning. Our approach is illustrated with an assessment of risks to conservation success as part of a conservation plan for the work of The Nature Conservancy in northern Australia. Risks can be both internal and external to a project, and occur across environmental, social, economic and political systems. Based on the relative importance of a risk and the level of certainty in its assessment we propose a series of appropriate, project level responses including research, monitoring, and active amelioration. Explicit identification, prioritization, and where possible, management of risks are important elements of using conservation resources in an informed and accountable manner. (letter)

  1. Chemical Risk Assessment: Traditional vs Public Health ...

    Science.gov (United States)

    Preventing adverse health impacts from exposures to environmental chemicals is fundamental to protecting individual and public health. When done efficiently and properly, chemical risk assessment enables risk management actions that minimize the incidence and impacts of environmentally-induced diseases related to chemical exposure. However, traditional chemical risk assessment is faced with multiple challenges with respect to predicting and preventing disease in human populations, and epidemiological studies increasingly report observations of adverse health effects at exposure levels predicted from animal studies to be safe for humans. This discordance reinforces concerns about the adequacy of contemporary risk assessment practices (Birnbaum, Burke, & Jones, 2016) for protecting public health. It is becoming clear that to protect public health more effectively, future risk assessments will need to use the full range of available data, draw on innovative methods to integrate diverse data streams, and consider health endpoints that also reflect the range of subtle effects and morbidities observed in human populations. Given these factors, there is a need to reframe chemical risk assessment to be more clearly aligned with the public health goal of minimizing environmental exposures associated with disease. Preventing adverse health impacts from exposures to environmental chemicals is fundamental to protecting individual and public health. Chemical risk assessments

  2. The air emissions risk assessment model (AERAM)

    International Nuclear Information System (INIS)

    Gratt, L.B.

    1991-01-01

    AERAM is an environmental analysis and power generation station investment decision support tool. AERAM calculates the public health risk (in terms of the lifetime cancers) in the nearby population from pollutants released into the air. AERAM consists of four main subroutines: Emissions, Air, Exposure and Risk. The Emission subroutine uses power plant parameters to calculate the expected release of the pollutants. A coal-fired and oil-fired power plant are currently available. A gas-fired plant model is under preparation. The release of the pollutants into the air is followed by their dispersal in the environment. The dispersion in the Air Subroutine uses the Environmental Protection Agency's model, Industrial Source Complex-Long Term. Additional dispersion models (Industrial Source Complex - Short Term and Cooling Tower Drift) are being implemented for future AERAM versions. The Expose Subroutine uses the ambient concentrations to compute population exposures for the pollutants of concern. The exposures are used with corresponding dose-response model in the Risk Subroutine to estimate both the total population risk and individual risk. The risk for the dispersion receptor-population centroid for the maximum concentration is also calculated for regulatory-population purposes. In addition, automated interfaces with AirTox (an air risk decision model) have been implemented to extend AERAM's steady-state single solution to the decision-under-uncertainty domain. AERAM was used for public health risks, the investment decision for additional pollution control systems based on health risk reductions, and the economics of fuel vs. health risk tradeoffs. AERAM provides that state-of-the-art capability for evaluating the public health impact airborne toxic substances in response to regulations and public concern

  3. The assessment and perception of risk

    International Nuclear Information System (INIS)

    Daglish, J.

    1981-01-01

    A recent two-day meeting was called by the Royal Society to discuss all types of risks, but symptomatic of the concerns of most of those present, the discussion centred mainly on the risks inherent in energy production and use. Among the subjects considered were public perception of differing risks, and how these are ranked, and risks versus benefits. Quotations from and summaries of many of the papers presented show that it was generally felt that scientists must be very careful in the way that they use numerical assessments of risk and that they should pay more attention than they have to social and political factors. (U.K.)

  4. Nanomaterials: Regulation and Risk Assessment

    DEFF Research Database (Denmark)

    Hansen, Steffen Foss; Grieger, Khara Deanne; Baun, Anders

    2013-01-01

    , the Water Framework Directive, pharmaceuticals regulation, and the Novel Foods Regulation. Current regulation of nanomaterials entail three overall challenges: 1) limitations in regard to terminology and definitions of key terms such as a “substance,” “novel food,” etc.; 2) safety assessment requirements...

  5. Assessing Your Board's Risk Tolerance

    Science.gov (United States)

    Griswold, John S.; Jarvis, William F.

    2014-01-01

    In the wake of the financial crisis, trustees of many endowed nonprofit institutions realized that their portfolio was riskier than they thought and their own ability to tolerate loss wasn't as strong as they imagined. What can board and investment committee members do to improve their ability to assess their--and their institution's--capacity for…

  6. Nuclear insurance risk assessment using risk-based methodology

    International Nuclear Information System (INIS)

    Wendland, W.G.

    1992-01-01

    This paper presents American Nuclear Insurers' (ANI's) and Mutual Atomic Energy Liability Underwriters' (MAELU's) process and experience for conducting nuclear insurance risk assessments using a risk-based methodology. The process is primarily qualitative and uses traditional insurance risk assessment methods and an approach developed under the auspices of the American Society of Mechanical Engineers (ASME) in which ANI/MAELU is an active sponsor. This process assists ANI's technical resources in identifying where to look for insurance risk in an industry in which insurance exposure tends to be dynamic and nonactuarial. The process is an evolving one that also seeks to minimize the impact on insureds while maintaining a mutually agreeable risk tolerance

  7. Cardiovascular risk assessment in hypertensive patients

    Directory of Open Access Journals (Sweden)

    Elaine Amaral de Paula

    Full Text Available OBJECTIVE: to assess cardiovascular risk by means of the traditional Framingham score and the version modified through the incorporation of emerging risk factors, such as family history of acute myocardial infarction, metabolic syndrome and chronic kidney disease. METHOD: participants were 50 hypertensive patients under outpatient treatment. The clinical data were collected through a semi-structured interview and the laboratory data from patients' histories. RESULTS: it was verified that the traditional Framingham score was predominantly low (74%, with 14% showing medium risk and 12% high risk. After the inclusion of emerging risk factors, the chance of a coronary event was low in 22% of the cases, medium in 56% and high in 22%. CONCLUSIONS: the comparison between the traditional Framingham risk score and the modified version demonstrated a significant difference in the cardiovascular risk classification, whose correlation shows discreet agreement between the two scales. Lifestyle elements seem to play a determinant role in the increase in cardiovascular risk levels.

  8. Models for assessing and managing credit risk

    Directory of Open Access Journals (Sweden)

    Neogradi Slađana

    2014-01-01

    Full Text Available This essay deals with the definition of a model for assessing and managing credit risk. Risk is an inseparable component of any average and normal credit transaction. Looking at the different aspects of the identification and classification of risk in the banking industry as well as representation of the key components of modern risk management. In the first part of the essay will analyze how the impact of credit risk on bank and empirical models for determining the financial difficulties in which the company can be found. Bank on the basis of these models can reduce number of approved risk assets. In the second part, we consider models for improving credit risk with emphasis on Basel I, II and III, and the third part, we conclude that the most appropriate model and gives the best effect for measuring credit risk in domestic banks.

  9. Development and application of a geospatial wildfire exposure and risk calculation tool

    Science.gov (United States)

    Matthew P. Thompson; Jessica R. Haas; Julie W. Gilbertson-Day; Joe H. Scott; Paul Langowski; Elise Bowne; David E. Calkin

    2015-01-01

    Applying wildfire risk assessment models can inform investments in loss mitigation and landscape restoration, and can be used to monitor spatiotemporal trends in risk. Assessing wildfire risk entails the integration of fire modeling outputs, maps of highly valued resources and assets (HVRAs), characterization of fire effects, and articulation of relative importance...

  10. Disease state fingerprint for fall risk assessment.

    Science.gov (United States)

    Similä, Heidi; Immonen, Milla

    2014-01-01

    Fall prevention is an important and complex multifactorial challenge, since one third of people over 65 years old fall at least once every year. A novel application of Disease State Fingerprint (DSF) algorithm is presented for holistic visualization of fall risk factors and identifying persons with falls history or decreased level of physical functioning based on fall risk assessment data. The algorithm is tested with data from 42 older adults, that went through a comprehensive fall risk assessment. Within the study population the Activities-specific Balance Confidence (ABC) scale score, Berg Balance Scale (BBS) score and the number of drugs in use were the three most relevant variables, that differed between the fallers and non-fallers. This study showed that the DSF visualization is beneficial in inspection of an individual's significant fall risk factors, since people have problems in different areas and one single assessment scale is not enough to expose all the people at risk.

  11. Assessing Extinction Risk: Integrating Genetic Information

    Directory of Open Access Journals (Sweden)

    Jason Dunham

    1999-06-01

    Full Text Available Risks of population extinction have been estimated using a variety of methods incorporating information from different spatial and temporal scales. We briefly consider how several broad classes of extinction risk assessments, including population viability analysis, incidence functions, and ranking methods integrate information on different temporal and spatial scales. In many circumstances, data from surveys of neutral genetic variability within, and among, populations can provide information useful for assessing extinction risk. Patterns of genetic variability resulting from past and present ecological and demographic events, can indicate risks of extinction that are otherwise difficult to infer from ecological and demographic analyses alone. We provide examples of how patterns of neutral genetic variability, both within, and among populations, can be used to corroborate and complement extinction risk assessments.

  12. Operationalization Of The Professional Risks Assessment Activity

    Science.gov (United States)

    Ivascu, Victoria Larisa; Cirjaliu, Bianca; Draghici, Anca

    2015-07-01

    Professional risks assessment approach (integration of analysis and evaluation processes) is linked with the general concerns of nowadays companies for their employees' health and safety assurances, in the context of organizations sustainable development. The paper presents an approach for the operationalization of the professional risk assessment activity in companies through the implementation and use of the OnRisk platform (this have been tested in some industrial companies). The short presentation of the relevant technical reports and statistics on OSH management at the European Union level underlines the need for the development of a professional risks assessment. Finally, there have been described the designed and developed OnRisk platform as a web platform together with some case studies that have validate the created tool.

  13. Formulation and Presentation of Risk Assessments to Address Risk Targets for Radioactive Waste Disposal

    International Nuclear Information System (INIS)

    Wilmot, R.D.

    2002-10-01

    The Swedish regulators have been active in the field of performance assessment of radioactive waste disposal facilities for many years and have developed sophisticated approaches to the development of scenarios and other aspects of assessments. These assessments have generally used dose as the assessment end-point. Regulations recently established in Sweden (SSI FS 1998:1) have introduced a risk criterion for radioactive waste disposal: the annual risk of harmful effects after closure of a disposal facility should not exceed 10 -6 for a representative individual in the group exposed to the greatest risk. This report evaluates different approaches to the definition and use of probabilities in the context of risk assessments, and examines the presentation of the results of risk assessments in safety cases to meet risk targets. The report illustrates the strengths and weaknesses of different possible approaches to risk assessment by reference to assessments in other countries, and provides suggestions for future activity and development in this area by the Swedish regulators. The review of experience in other countries has led to a number of key observations relevant to the conduct of regulatory work on risk assessments and preparations for review. These highlight the importance of developing a protocol for conducting calculations, and linking such a protocol to the requirements of risk assessment calculations and to existing code and model capabilities. There are a number of decisions and assumptions required in developing a risk assessment methodology that could potentially affect the calculated results. These assumptions are independent of the analysis of performance, and relate to issues such as the expectation value of risk, risk dilution, the definition of probability density functions and achieving convergence. A review of a proponent's risk assessment should address these issues in determining the appropriateness and validity of the results presented

  14. Formulation and Presentation of Risk Assessments to Address Risk Targets for Radioactive Waste Disposal

    Energy Technology Data Exchange (ETDEWEB)

    Wilmot, R.D. [Galson Sciences Ltd, Oakham (United Kingdom)

    2002-10-01

    The Swedish regulators have been active in the field of performance assessment of radioactive waste disposal facilities for many years and have developed sophisticated approaches to the development of scenarios and other aspects of assessments. These assessments have generally used dose as the assessment end-point. Regulations recently established in Sweden (SSI FS 1998:1) have introduced a risk criterion for radioactive waste disposal: the annual risk of harmful effects after closure of a disposal facility should not exceed 10{sup -6} for a representative individual in the group exposed to the greatest risk. This report evaluates different approaches to the definition and use of probabilities in the context of risk assessments, and examines the presentation of the results of risk assessments in safety cases to meet risk targets. The report illustrates the strengths and weaknesses of different possible approaches to risk assessment by reference to assessments in other countries, and provides suggestions for future activity and development in this area by the Swedish regulators. The review of experience in other countries has led to a number of key observations relevant to the conduct of regulatory work on risk assessments and preparations for review. These highlight the importance of developing a protocol for conducting calculations, and linking such a protocol to the requirements of risk assessment calculations and to existing code and model capabilities. There are a number of decisions and assumptions required in developing a risk assessment methodology that could potentially affect the calculated results. These assumptions are independent of the analysis of performance, and relate to issues such as the expectation value of risk, risk dilution, the definition of probability density functions and achieving convergence. A review of a proponent's risk assessment should address these issues in determining the appropriateness and validity of the results presented

  15. Hanford Site baseline risk assessment methodology

    International Nuclear Information System (INIS)

    1992-03-01

    This report describes risk assessment methodology associated with the remedial action programs at the Hanford Reservation. Topics addressed include human health evaluation, pollutant and radionuclide transport through the environment, and environmental transport pathways

  16. Assessing Risk with GASB Statement No. 3.

    Science.gov (United States)

    Wood, Venita M.; Scott, Bob

    1987-01-01

    Discusses a Government Accounting Standards Board (GASB) publication designed to provide financial statement users with information to assess a government's actual and future deposit and investment market and credit risk. (MLF)

  17. Reducing the harms associated with risk assessments

    International Nuclear Information System (INIS)

    Montague, Peter

    2004-01-01

    Risk assessments are the intellectual products of dedicated public health and environmental professionals. Like many other products, risk assessments carry with them the potential for both good and harm. This paper briefly examines some of the harms to which risk assessments have contributed, and then suggests that the legal 'duty to warn' doctrine offers a logical and practical way to reduce some of these harms. The paper suggests concepts that could be incorporated into warnings accompanying every formal risk assessment as routine 'boiler plate' addenda, just as other potentially harmful products, such as lawn mowers and cook stoves, are accompanied by warnings. Finally, the paper briefly examines the 'Code of Ethics and Standards of Practice for Environmental Professionals' (promulgated by the National Association of Environmental Professionals) and shows that the suggested warnings are consistent with recommended practices for environmental professionals

  18. Advanced Test Reactor probabilistic risk assessment

    International Nuclear Information System (INIS)

    Atkinson, S.A.; Eide, S.A.; Khericha, S.T.; Thatcher, T.A.

    1993-01-01

    This report discusses Level 1 probabilistic risk assessment (PRA) incorporating a full-scope external events analysis which has been completed for the Advanced Test Reactor (ATR) located at the Idaho National Engineering Laboratory

  19. Framework for Shared Drinking Water Risk Assessment.

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, Thomas Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Tidwell, Vincent C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Peplinski, William John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mitchell, Roger [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Binning, David [AEM Corp., Herndon, VA (United States); Meszaros, Jenny [AEM Corp., Herndon, VA (United States)

    2017-01-01

    Central to protecting our nation's critical infrastructure is the development of methodologies for prioritizing action and supporting resource allocation decisions associated with risk-reduction initiatives. Toward this need a web-based risk assessment framework that promotes the anonymous sharing of results among water utilities is demonstrated. Anonymous sharing of results offers a number of potential advantages such as assistance in recognizing and correcting bias, identification of 'unknown, unknowns', self-assessment and benchmarking for the local utility, treatment of shared assets and/or threats across multiple utilities, and prioritization of actions beyond the scale of a single utility. The constructed framework was demonstrated for three water utilities. Demonstration results were then compared to risk assessment results developed using a different risk assessment application by a different set of analysts.

  20. Audit Practices: Summary of Risk Assessment Methodologies

    National Research Council Canada - National Science Library

    2002-01-01

    .... The primary objective of an audit risk assessment is to provide its users with the assurance that audit resources are focused on those areas needing greatest attention and will provide the best value...

  1. Center for Advancing Microbial Risk Assessment

    Data.gov (United States)

    Federal Laboratory Consortium — The Center for Advancing Microbial Risk Assessment (CAMRA), based at Michigan State University and jointly funded by the U.S. Department of Homeland Security and the...

  2. Procedures for health risk assessment in Europe

    NARCIS (Netherlands)

    Seeley, M.R.; Tonner-Navarro, L.E.; Beck, B.D.; Deskin, R.; Feron, V.J.; Johanson, G.; Bolt, H.M.

    2001-01-01

    This report compares cancer classification systems, health risk assessment approaches, and procedures used for establishing occupational exposure limits (OELs), in various European countries and scientific organizations. The objectives were to highlight and compare key aspects of these processes and

  3. Science and judgment in risk assessment

    National Research Council Canada - National Science Library

    National Research Council (U.S.). Committee on Risk Assessment of Hazardous Air Pollutants

    .... This comprehensive and readable book explores how the U.S. Environmental Protection Agency (EPA) can improve its risk assessment practices, with a focus on implementation of the 1990 Clean Air Act Amendments...

  4. Business managers turn to risk assessment

    International Nuclear Information System (INIS)

    Allen, Frank

    1993-01-01

    Risk assessments have evolved to help technical managers in nuclear and other industries to design and operate plant with safety in mind. However, they are now developing into the area of business management. (author)

  5. Reinforcement of qualitative risk assessment proposals from computer science

    International Nuclear Information System (INIS)

    Friedlhuber, T.; Hibti, M.; Rauzy, A.

    2013-01-01

    During the last decade a lot of research has been made to evaluate concepts and methos of quantitative risk assessment in order to predict hazards more precisely. Nevertheless, the occurrence of new catastrophes like the Indonesian Tsunami in 2004, the Deepwater Horizon accident in 2010 or recently the Fukushima accidents in 2011 raise the question whether we may underestimate some natural limits of annotative risk assessment or even mistake its significance. Especially in the case of very unlikely events, in combination with uncertainty and severe consequences, may be we would do better to concentrate more on understanding risk than on calculating probability values. In this paper we apply progresses, made in the field of computer science, to tools and modelling concepts used in risk assessment. Regarding computer science, we point out now concepts, that may improve the quality of risk models and the process of model engineering. The goal is to reinforce the importance of qualitative risk assessment with the help of sophisticated tools and modelling. Qualitative risk assessment aims to understand risk and therefore reflects the initial idea of risk assessment. Risk understanding requires understanding systems and relations of components. It is fundamental to comprehend the meaning of components in fault- and event trees, to retrace all applied modifications and to highlight critical aspects. It is important how PSA models are visualized, documented, navigated, how results are presented and how model maintenance, integration and version control are performed. Also, the conjoint usage of different type of models (for example PSA models together with event sequence diagrams) can contribute to quality assurance. We present new concepts for various kind of problems. (author)

  6. Vulnerability Identification Errors in Security Risk Assessments

    OpenAIRE

    Taubenberger, Stefan

    2014-01-01

    At present, companies rely on information technology systems to achieve their business objectives, making them vulnerable to cybersecurity threats. Information security risk assessments help organisations to identify their risks and vulnerabilities. An accurate identification of risks and vulnerabilities is a challenge, because the input data is uncertain. So-called ’vulnerability identification errors‘ can occur if false positive vulnerabilities are identified, or if vulnerabilities remain u...

  7. Handling Interdependencies in Climate Change Risk Assessment

    OpenAIRE

    Dawson, Richard

    2015-01-01

    Typically, a climate change risk assessment focuses on individual sectors or hazards. However, interdependencies between climate risks manifest themselves via functional, physical, geographical, economic, policy and social mechanisms. These can occur over a range of spatial or temporal scales and with different strengths of coupling. Three case studies are used to demonstrate how interdependencies can significantly alter the nature and magnitude of risk, and, consequently, investment prioriti...

  8. Creation of a Risk Assessment Methodology

    OpenAIRE

    Lefebvre, Nicolas

    2007-01-01

    This report is a presentation of the work realised during an internship at the consultancy division of Thales Security Systems from September 2005 to June 2006. Thales Security Systems is part of Thales, an international group in defence, aeronautics, etc. The work realised consisted in the creation of a new risk assessment methodology for a commercial offer called HELP, standing for Human, Environmental, Logical and Physical security. As a basis for the work, 5 existing risk assessment metho...

  9. Environmental risk assessment of pesticides in Ethiopia

    NARCIS (Netherlands)

    Teklu, B.M.

    2016-01-01

    The current increase in application rate and usage frequency of application of pesticides in Ethiopia pose direct risks to surface water aquatic organisms and humans and cattle using surface water as a source of drinking water in rural parts of the country. A model based risk assessment as

  10. Mergers and acquisitions: valuation and risk assessment

    International Nuclear Information System (INIS)

    Calvin, B.N.

    1996-01-01

    An independent review of all facets of risk management, as it pertains to mergers and acquisitions within the petroleum industry, with no transactional motivation, was provided by a representative of a firm specializing in all phases of risk assessment. The following topics received attention: (1) the forward curve versus industry expectations, (2) investor expectations, (3) financial versus physical transactions, and (4) synthetic debt

  11. Risk assessment of complex accident scenarios

    International Nuclear Information System (INIS)

    Kluegel, Jens-Uwe

    2012-01-01

    The use of methods of risk assessment in accidents in nuclear plants is based on an old tradition. The first consistent systematic study is considered to be the Rasmussen Study of the U.S. Nuclear Regulatory Commission, NRC, WASH-1400. Above and beyond the realm of nuclear technology, there is an extensive range of accident, risk and reliability research into technical-administrative systems. In the past, it has been this area of research which has led to the development of concepts of safety precautions of the type also introduced into nuclear technology (barrier concept, defense in depth, single-failure criterion), where they are now taken for granted as trivial concepts. Also for risk analysis, nuclear technology made use of methods (such as event and fault tree analyses) whose origins were outside the nuclear field. One area in which the use of traditional methods of probabilistic safety analysis is encountering practical problems is risk assessment of complex accident scenarios in nuclear technology. A definition is offered of the term 'complex accident scenarios' in nuclear technology. A number of problems are addressed which arise in the use of traditional PSA procedures in risk assessment of complex accident scenarios. Cases of complex accident scenarios are presented to demonstrate methods of risk assessment which allow robust results to be obtained even when traditional techniques of risk analysis are maintained as a matter of principle. These methods are based on the use of conditional risk metrics. (orig.)

  12. Gender and risk assessment in contraceptive technologies

    NARCIS (Netherlands)

    van Kammen, Jessika; Oudshoorn, Nelly E.J.

    This paper concerns a comparison of risk assessment practices of contraceptives for women and men. Our analysis shows how the evaluation of health risks of contraceptives does not simply reflect the specific effects of chemical compounds in the human body. Rather, we show how side-effects were rated

  13. Uncertainty quantification in flood risk assessment

    Science.gov (United States)

    Blöschl, Günter; Hall, Julia; Kiss, Andrea; Parajka, Juraj; Perdigão, Rui A. P.; Rogger, Magdalena; Salinas, José Luis; Viglione, Alberto

    2017-04-01

    Uncertainty is inherent to flood risk assessments because of the complexity of the human-water system, which is characterised by nonlinearities and interdependencies, because of limited knowledge about system properties and because of cognitive biases in human perception and decision-making. On top of the uncertainty associated with the assessment of the existing risk to extreme events, additional uncertainty arises because of temporal changes in the system due to climate change, modifications of the environment, population growth and the associated increase in assets. Novel risk assessment concepts are needed that take into account all these sources of uncertainty. They should be based on the understanding of how flood extremes are generated and how they change over time. They should also account for the dynamics of risk perception of decision makers and population in the floodplains. In this talk we discuss these novel risk assessment concepts through examples from Flood Frequency Hydrology, Socio-Hydrology and Predictions Under Change. We believe that uncertainty quantification in flood risk assessment should lead to a robust approach of integrated flood risk management aiming at enhancing resilience rather than searching for optimal defense strategies.

  14. Risk Assessment Uncertainties in Cybersecurity Investments

    Directory of Open Access Journals (Sweden)

    Andrew Fielder

    2018-06-01

    Full Text Available When undertaking cybersecurity risk assessments, it is important to be able to assign numeric values to metrics to compute the final expected loss that represents the risk that an organization is exposed to due to cyber threats. Even if risk assessment is motivated by real-world observations and data, there is always a high chance of assigning inaccurate values due to different uncertainties involved (e.g., evolving threat landscape, human errors and the natural difficulty of quantifying risk. Existing models empower organizations to compute optimal cybersecurity strategies given their financial constraints, i.e., available cybersecurity budget. Further, a general game-theoretic model with uncertain payoffs (probability-distribution-valued payoffs shows that such uncertainty can be incorporated in the game-theoretic model by allowing payoffs to be random. This paper extends previous work in the field to tackle uncertainties in risk assessment that affect cybersecurity investments. The findings from simulated examples indicate that although uncertainties in cybersecurity risk assessment lead, on average, to different cybersecurity strategies, they do not play a significant role in the final expected loss of the organization when utilising a game-theoretic model and methodology to derive these strategies. The model determines robust defending strategies even when knowledge regarding risk assessment values is not accurate. As a result, it is possible to show that the cybersecurity investments’ tool is capable of providing effective decision support.

  15. Risk assessment instruments in clinical practice.

    Science.gov (United States)

    Côté, Gilles; Crocker, Anne G; Nicholls, Tonia L; Seto, Michael C

    2012-04-01

    To determine whether the items in one of the most widely validated instruments of violence risk assessment, the Historical-Clinical-Risk Management-20 (HCR-20), are used in review board hearings to assess the risk of violence by people found Not Criminally Responsible on account of Mental Disorder (NCRMD). This study was conducted from October 2004 to August 2006 in Quebec's sole forensic psychiatric hospital and 2 large civil psychiatric hospitals designated for the care of people declared NCRMD in the Montreal metropolitan area. The risk assessments presented by clinicians at annual review board hearings and the boards' rationale for the release or detention of people found NCRMD were contrasted with the risk assessments conducted by the research team using the HCR-20. The final sample was comprised of 96 men. Very few of the risk factors identified by prior research (HCR-20 items) were mentioned in the hearing process, whether in clinical reports, discussions during the hearing, or in the disposition justification. The findings confirm that there remains a significant gap between research evidence and risk assessment practice.

  16. Risk Assessment Stability: A Revalidation Study of the Arizona Risk/Needs Assessment Instrument

    Science.gov (United States)

    Schwalbe, Craig S.

    2009-01-01

    The actuarial method is the gold standard for risk assessment in child welfare, juvenile justice, and criminal justice. It produces risk classifications that are highly predictive and that may be robust to sampling error. This article reports a revalidation study of the Arizona Risk/Needs Assessment instrument, an actuarial instrument for juvenile…

  17. A framework for combining social impact assessment and risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Mahmoudi, Hossein, E-mail: mahmoudi@uni-hohenheim.de [Department of Social Sciences in Agriculture, University of Hohenheim (Germany); Environmental Sciences Research Institute, Shahid Beheshti University, G.C. (Iran, Islamic Republic of); Renn, Ortwin [Department of Technology and Environmental Sociology (and DIALOGIK), University of Stuttgart (Germany); Vanclay, Frank [Department of Cultural Geography, Faculty of Spatial Sciences, University of Groningen, Groningen (Netherlands); Hoffmann, Volker [Department of Social Sciences in Agriculture, University of Hohenheim (Germany); Karami, Ezatollah [College of Agriculture, Shiraz University, Shiraz (Iran, Islamic Republic of)

    2013-11-15

    An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify the common features of social impact assessment (SIA) and social risk assessment (SRA), and discuss the merits of a combined approach. A hybrid model combining SIA and SRA to form a new approach called, ‘risk and social impact assessment’ (RSIA) is introduced. RSIA expands the capacity of SIA to evaluate and manage the social impacts of risky projects such as nuclear energy as well as natural hazards and disasters such as droughts and floods. We outline the three stages of RSIA, namely: impact identification, impact assessment, and impact management. -- Highlights: • A hybrid model to combine SIA and SRA namely RSIA is proposed. • RSIA can provide the proper mechanism to assess social impacts of natural hazards. • RSIA can play the role of ex-post as well as ex-ante assessment. • For some complicated and sensitive cases like nuclear energy, conducting a RSIA is necessary.

  18. A framework for combining social impact assessment and risk assessment

    International Nuclear Information System (INIS)

    Mahmoudi, Hossein; Renn, Ortwin; Vanclay, Frank; Hoffmann, Volker; Karami, Ezatollah

    2013-01-01

    An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify the common features of social impact assessment (SIA) and social risk assessment (SRA), and discuss the merits of a combined approach. A hybrid model combining SIA and SRA to form a new approach called, ‘risk and social impact assessment’ (RSIA) is introduced. RSIA expands the capacity of SIA to evaluate and manage the social impacts of risky projects such as nuclear energy as well as natural hazards and disasters such as droughts and floods. We outline the three stages of RSIA, namely: impact identification, impact assessment, and impact management. -- Highlights: • A hybrid model to combine SIA and SRA namely RSIA is proposed. • RSIA can provide the proper mechanism to assess social impacts of natural hazards. • RSIA can play the role of ex-post as well as ex-ante assessment. • For some complicated and sensitive cases like nuclear energy, conducting a RSIA is necessary

  19. Hybrid Correlated Data in Risk Assessment

    Directory of Open Access Journals (Sweden)

    Bogdan Rębiasz

    2015-01-01

    Full Text Available A method for evaluating the risks in a situation has been presented where parameters in the calculation are expressed in the form of dependent fuzzy numbers and probability distributions. The procedure of risk estimation combines stochastic simulation with the execution of arithmetic operations on interactive fuzzy numbers. In order to define operations on such numbers, non-linear programming is used. Relations between the parameters presented in the form of fuzzy numbers and probability distributions are expressed by means of interval regression. The results of computations indicate that the relations between parameters have a significant impact on the ratios characterizing risk. (original abstract

  20. Risk assessment approach for Rokkasho reprocessing plant

    International Nuclear Information System (INIS)

    Ootou, Y.; Tamauchi, Y.; Hayashi, Y.; Takebe, K.; Miyata, T.

    2006-01-01

    Full text: It is desirable that the operation and maintenance of Rokkasho Reprocessing Plant (RRP) be established and conducted with maximum effectiveness and efficiency, making the best use of risk information to help the plant achieve further enhanced safety. Risk assessment is applied for RRP, and upgraded risk information is established. In the basic design phase, the potential incidents and accidents that might occur in the plant were identified systematically and exhaustively adopting the HAZOP method. After screening the potential for occurrence, the design basis accidents (DBAs) were identified and it was confirmed that the plant would not put the general public at risk of significant radiation exposure in the case of such accidents, even when assuming the single failure of dynamic apparatus in the prevention and mitigation systems. To support the deterministic safety assessment mentioned above, the risk assessment was conducted during the basic design phase. Of the DBAs and out-of-design basis accidents excluded from DBAs because of extremely rare occurrence possibilities, the risk assessment was conducted for such accidents which might cause relatively high consequence for the general public. The risk assessment was conducted using the PSA method generally used for nuclear power plants. After that, a review of the occurrence frequency assessment for some of the accidents was made, taking into account information relating to detailed design and operation procedures. Typical examples are a loss of the hydrogen scavenging function in the plutonium solution tank and a loss of cooling capability in the high-active liquid waste storage tank. The occurrence frequency for a loss of the hydrogen scavenging function was less than 10 -5 /year. The occurrence frequency for a loss of cooling capability was less than 10 -7 /year. In addition, an importance assessment (FV index, Risk Achievement Worth) was conducted, such as a contribution to the occurrence frequency

  1. The ICRP opinion of the calculation of doses and risks associated with exposures to tritium

    International Nuclear Information System (INIS)

    Paquetla, F.; Harrison, J.

    2009-01-01

    As the management of exposures to tritium, just like for other radionuclides, relies on the effective dose calculation, it also requires the application of coefficients to take the variety of radiations and the sensitivity of the different irradiated tissues into account. The authors discuss the determination and the use of the weighting factor (Wr) which reflects the relative biological effectiveness (RBE) of different types of radiation. They outline that some researchers asked for a review of this factor, and that the RBE is related to several parameters. All this and other issues entail uncertainties. The authors then give the opinion of the ICRP on this issue and notably for the assessment of the individual risk of cancer after exposure to tritium

  2. A field study comparing two methods of transportation risk assessment

    International Nuclear Information System (INIS)

    Harmon, M.F.; Brey, R.R.; Gesell, T.F.; Oberg, S.G.

    1996-01-01

    RADTRAN 4 is a computer code used for; assessing risks associated with the transportation of nuclear materials. The code employs the common modeling practice of using default values for input variables to simplify the modeling of complex scenarios, thus producing conservative final risk determinations. To better address local public concerns it is of interest to quantify the introduced conservatism by taking a site-specific approach to radiation risk assessment. With RISKIND, incident-free and accident condition doses were calculated for two suburban population groups using both default input parameters; and site-specific values to describe population demographics of regions in Pocatello, Idaho, along the I-15 corridor. The use of site-specific parameters resulted in incident-free doses ranging from the same order of magnitude to one order of magnitude less than the doses calculated with default input parameters. Correcting accident condition doses for the age distribution of the populations and employing site-specific weather data resulted in doses 1.1 times lower than estimated using default input parameters. Dose-risks calculated with RISKIND for the two population groups using site-specific data were of the same order of magnitude as the risk calculated using RADTRAN 4 for the suburban population described in DOE/EIS-0203-D. This study revealed in one specific application that use of default and site-specific parameters resulted in comparable dose estimates. If this tendency were to hold generally true over other environments and model variables, then risk assessors might prefer to select codes on the basis of criteria such as (1) the number of variables to select from; (2) ability to calculate consequences directly, and (3) outputs geared to addressing public concerns

  3. Health Risk Assessment on Hazardous Ingredients in Household Deodorizing Products

    Directory of Open Access Journals (Sweden)

    Minjin Lee

    2018-04-01

    Full Text Available The inhalation of a water aerosol from a humidifier containing disinfectants has led to serious lung injuries in Korea. To promote the safe use of products, the Korean government enacted regulations on the chemicals in various consumer products that could have adverse health effects. Given the concern over the potential health risks associated with the hazardous ingredients in deodorizing consumer products, 17 ingredients were analyzed and assessed according to their health risk on 3 groups by the application type in 47 deodorizing products. The risk assessment study followed a stepwise procedure (e.g., collecting toxicological information, hazard identification/exposure assessment, and screening and detailed assessment for inhalation and dermal routes. The worst-case scenario and maximum concentration determined by the product purpose and application type were used as the screening assessment. In a detailed assessment, the 75th exposure factor values were used to estimate the assumed reasonable exposure to ingredients. The exposed concentrations of seven ingredients were calculated. Due to limitation of toxicity information, butylated hydroxyl toluene for a consumer’s exposure via the dermal route only was conducted for a detailed assessment. This study showed that the assessed ingredients have no health risks at their maximum concentrations in deodorizing products. This approach can be used to establish guidelines for ingredients that may pose inhalation and dermal hazards.

  4. Health Risk Assessment on Hazardous Ingredients in Household Deodorizing Products

    Science.gov (United States)

    Lee, Minjin; Kim, Joo-Hyon; Lee, Daeyeop; Kim, Jaewoo; Lim, Hyunwoo; Seo, Jungkwan; Park, Young-Kwon

    2018-01-01

    The inhalation of a water aerosol from a humidifier containing disinfectants has led to serious lung injuries in Korea. To promote the safe use of products, the Korean government enacted regulations on the chemicals in various consumer products that could have adverse health effects. Given the concern over the potential health risks associated with the hazardous ingredients in deodorizing consumer products, 17 ingredients were analyzed and assessed according to their health risk on 3 groups by the application type in 47 deodorizing products. The risk assessment study followed a stepwise procedure (e.g., collecting toxicological information, hazard identification/exposure assessment, and screening and detailed assessment for inhalation and dermal routes). The worst-case scenario and maximum concentration determined by the product purpose and application type were used as the screening assessment. In a detailed assessment, the 75th exposure factor values were used to estimate the assumed reasonable exposure to ingredients. The exposed concentrations of seven ingredients were calculated. Due to limitation of toxicity information, butylated hydroxyl toluene for a consumer’s exposure via the dermal route only was conducted for a detailed assessment. This study showed that the assessed ingredients have no health risks at their maximum concentrations in deodorizing products. This approach can be used to establish guidelines for ingredients that may pose inhalation and dermal hazards. PMID:29652814

  5. A review of probabilistic risk assessment of contaminated land

    International Nuclear Information System (INIS)

    Oeberg, T.; Bergbaeck, B.

    2005-01-01

    Background, Aims and Scope. The management and decisions concerning restoration of contaminated land often require indepth risk analyses. An environmental risk assessment is generally described as proceeding in four separate steps: hazard identification, dose-response assessment, exposure assessment, and risk characterization. The risk assessment should acknowledge and quantify the uncertainty in risk predictions. This can be achieved by applying probabilistic methods which, although they have been available for many years, are still not generally used. Risk assessment of contaminated land is an area where probabilistic methods have proved particularly useful. Many reports have appeared in the literature, mostly by North American researchers. The aim of this review is to summarize the experience gained so far, provide a number of useful examples, and suggest what may be done to promote probabilistic methods in Europe and the rest of the world. Methods. The available literature has been explored through searches in the major scientific and technical databases, WWW resources, textbooks and direct contacts with active researchers. A calculation example was created using standard simulation software. (orig.)

  6. Practical ambiguities during calculation of energy ratios and their impacts on life cycle assessment calculations

    International Nuclear Information System (INIS)

    Zhang, Yongli; Colosi, Lisa M.

    2013-01-01

    The energy ratio metrics are increasingly important means of assessing the efficiency of energy production for emerging biofuels platforms, making comparisons among multiple alternatives, and formulating policies to foster commercialization of sustainable energy systems. However, these metrics are susceptible to inadvertent or meaningful mathematical manipulation, whereby the same dataset can be used to compute dramatically different values of energy return on investment (EROI). In this study, previously published life cycle assessment (LCA) data for algal biofuels, corn ethanol, and switchgrass ethanol are used to demonstrate how seven seemingly reasonable EROI formulations give rise to a wide range of output values. It is then demonstrated that production of bioelectricity, and to a lesser extent, other co-products, significantly increases EROI ambiguity. Overall, the EROI results are used to illustrate how EROI ambiguity makes it difficult to properly assess the energetic favorability of a particular energy system or to make accurate comparisons among multiple systems. It is then recommended that all future biofuels studies restrict themselves to usage of “EROI 1 ”, which documents all input and outputs as explicit terms, to mitigate EROI ambiguity and improve policy decision-making. - Highlights: ► Energy ratios are appealing but potentially ambiguous sustainability metrics. ► Various ratio formulations can give different metrics for the same dataset. ► Production of electricity or other co-products exacerbates ratio ambiguity

  7. Increased fracture risk assessed by fracture risk assessment tool in Greek patients with Crohn's disease.

    Science.gov (United States)

    Terzoudis, Sotirios; Zavos, Christos; Damilakis, John; Neratzoulakis, John; Dimitriadi, Daphne Anna; Roussomoustakaki, Maria; Kouroumalis, Elias A; Koutroubakis, Ioannis E

    2013-01-01

    The World Health Organization has recently developed the fracture risk assessment tool (FRAX) based on clinical risk factors and bone mineral density (BMD) for evaluation of the 10-year probability of a hip or a major osteoporotic fracture. The aim of this study was to evaluate the use of the FRAX tool in Greek patients with inflammatory bowel disease (IBD). FRAX scores were applied to 134 IBD patients [68 Crohn's disease (CD); 66 ulcerative colitis (UC)] who underwent dual-energy X-ray absorptiometry scans at the femoral neck and lumbar spine during the period 2007-2012. Calculation of the FRAX scores, with or without BMD, was made through a web-based probability model used to compute individual fracture probabilities according to specific clinical risk factors. The median 10-year probability of a major osteoporotic fracture for IBD patients based on clinical data was 7.1%, and including the BMD was 6.2%. A significant overestimation with the first method was found (P = 0.01). Both scores with and without BMD were significantly higher in CD patients compared with UC patients (P = 0.02 and P = 0.005, respectively). The median 10-year probability of hip fracture based on clinical data was 0.8%, and including the BMD was 0.9%. The score with use of BMD was significantly higher in CD compared with UC patients (P = 0.04). CD patients have significantly higher FRAX scores and possibly fracture risk compared with UC patients. The clinical FRAX score alone seems to overestimate the risk of osteoporotic fracture in Greek IBD patients.

  8. Risk assessment methodologies for predicting phosphorus losses

    NARCIS (Netherlands)

    Schoumans, O.F.; Chardon, W.J.

    2003-01-01

    Risk assessment parameters are needed to assess the contribution of phosphorus (P) losses from soil to surface water, and the effectiveness of nutrient and land management strategies for the reduction of P loss. These parameters need to take into account the large temporal and spatial variation in P

  9. Qualitative risk assessment as a remediation management tool

    International Nuclear Information System (INIS)

    Knutson, D.E.

    1991-01-01

    The technique used to complete this thesis utilizes existing NRC and EPA guidance on health-based risk to qualitatively prioritize preliminary assessments and provide a tool for the direction and management of remediation activities. This method is intended as a decision making tool to aid in prioritizing the remediation effort and manage the remedial investigation and feasibility study (RI/FS) process. It is not a replacement for the RI/FS. The methodology for qualitative risk assessment utilizes data gathered in preliminary assessments and calculates the health-based hazards and consequences from contaminants found at each individual location. The health-based qualitative risk indicated that number-sign 6 fuel oil, carbon tetrachloride, depleted uranium, and enriched uranium were the contaminants of major concern, in that order. Plutonium ranked approximately sixth in the contaminant of concern priority. 38 refs., 1 fig., 9 tabs

  10. Risk assessment of soil contamination criteria

    International Nuclear Information System (INIS)

    King, C.M.; Marter, W.L.; Montaque, D.F.; Holton, G.A.

    1987-06-01

    Criteria have been developed to select radioactive and nonradioactive contaminants at waste sites detailed analysis and risk assessment. These criteria were based on soil and water quality guidelines developed by various government agencies to determine if the criteria were appropriate. We performed a risk assessment of a hypothetical site which contained radioactive and nonradioactive contaminants at levels equal to the criteria values. Risks to the public from atmospheric, surface water, and groundwater exposure pathways were examined. Health risks to the public from atmospheric releases of radioactive and nonradioactive materials from a waste at soil criteria contamination levels are low. Health risks to the maximally exposed individual to chemical carcinogens are considerably below traditional EPA action levels. And health risks to the maximally exposed individual to atmospherically released radioactive contaminants is 1.88 x 10 -7 , more than a factor of 5 less than 10 -6 . Based on our atmospheric exposure pathways analysis and risk assessment, the applied soil criteria are appropriate for screening out unimportant risk contributors to human health from atmospheric exposure pathways. 13 refs., 3 figs., 7 tabs

  11. Hanford waste vitrification systems risk assessment

    International Nuclear Information System (INIS)

    Miller, W.C.; Hamilton, D.W.; Holton, L.K.; Bailey, J.W.

    1991-09-01

    A systematic Risk Assessment was performed to identify the technical, regulatory, and programmatic uncertainties and to quantify the risks to the Hanford Site double-shell tank waste vitrification program baseline (as defined in December 1990). Mitigating strategies to reduce the overall program risk were proposed. All major program elements were evaluated, including double-shell tank waste characterization, Tank Farms, retrieval, pretreatment, vitrification, and grouting. Computer-based techniques were used to quantify risks to proceeding with construction of the Hanford Waste Vitrification Plant on the present baseline schedule. Risks to the potential vitrification of single-shell tank wastes and cesium and strontium capsules were also assessed. 62 refs., 38 figs., 26 tabs

  12. An integrated risk assessment approach: Risk assessment in the programmatic environmental impact statement

    International Nuclear Information System (INIS)

    Morris, J.M.

    1994-01-01

    The following paper is an informal summary of salient points made in the presentation entitled open-quotes An Integrated Risk Assessment Approach: Risk Assessment in the Programmatic Environmental Impact Statement (PEIS).close quotes. This presentation was given at the U.S. DOE Integrated Planning Workshop in Denver, Colorado on June 2, 1994. Integrated decision analysis is very important in environmental restoration and waste management in the evaluation of such things as land use planning, waste load forecasting, cost analyses, and technology development activities. Integrated risk assessment is an approach that addresses multiple components of risk, including: risks from surplus facilities as well as typical environmental restoration sites, risks to the public, risks to workers, ecological risk, risks before, during and after remediation activities, and others

  13. New approaches for improving cardiovascular risk assessment.

    Science.gov (United States)

    Paredes, Simão; Rocha, Teresa; Mendes, Diana; Carvalho, Paulo; Henriques, Jorge; Morais, João; Ferreira, Jorge; Mendes, Miguel

    2016-01-01

    Clinical guidelines recommend the use of cardiovascular risk assessment tools (risk scores) to predict the risk of events such as cardiovascular death, since these scores can aid clinical decision-making and thereby reduce the social and economic costs of cardiovascular disease (CVD). However, despite their importance, risk scores present important weaknesses that can diminish their reliability in clinical contexts. This study presents a new framework, based on current risk assessment tools, that aims to minimize these limitations. Appropriate application and combination of existing knowledge is the main focus of this work. Two different methodologies are applied: (i) a combination scheme that enables data to be extracted and processed from various sources of information, including current risk assessment tools and the contributions of the physician; and (ii) a personalization scheme based on the creation of patient groups with the purpose of identifying the most suitable risk assessment tool to assess the risk of a specific patient. Validation was performed based on a real patient dataset of 460 patients at Santa Cruz Hospital, Lisbon, Portugal, diagnosed with non-ST-segment elevation acute coronary syndrome. Promising results were obtained with both approaches, which achieved sensitivity, specificity and geometric mean of 78.79%, 73.07% and 75.87%, and 75.69%, 69.79% and 72.71%, respectively. The proposed approaches present better performances than current CVD risk scores; however, additional datasets are required to back up these findings. Copyright © 2015 Sociedade Portuguesa de Cardiologia. Published by Elsevier España. All rights reserved.

  14. Caries risk assessment in pregnant women using cariogram

    Directory of Open Access Journals (Sweden)

    Dolić Olivera

    2017-01-01

    Full Text Available Introduction/Objective. “Cariogram” takes into account interactions between caries-related factors and expresses a graphic assessment of the caries risk. The aim of this study was to evaluate the relationship between caries risk and different variables of Cariogram in pregnant women. Methods. This study included 96 pregnant women. At baseline, data on general health, diet, oral hygiene, and fluoride exposure were obtained. DMFT (decayed, missing, and filled teeth index was calculated by clinical examination. Saliva analyses included mutans streptococci and lactobacilli counts, buffer capacity, and secretion rate. Scores were entered and caries risk was assessed. The women were divided into five groups according to their Cariogram caries risk. Results. The results of the study showed that 29.17% (28 of the pregnant women had high caries risk, 21.88% (21 – medium, 17.71% (17 – low, 16.67% (16 – very high, and 14.58% (14 – very low caries risk. In an average caries risk profile of pregnant women, the dominant sector was “Bacteria” (18.85% of the risk structure profile, followed by “Diet” (17.97%, “Circumstances” (15.68%, and “Susceptibility” sector (14.65%. Conclusion. Cariogram shows that pregnant women in Banja Luka, Bosnia and Herzegovina, had 46.14% chance of avoiding caries in the future. The Cariogram model can successfully determine caries risk profiles for pregnant women.

  15. Modelling IT risk in banking industry : A study on how to calculate the aggregate loss distribution of IT risk

    OpenAIRE

    Isaksson, Didrik

    2017-01-01

    Background: Lack of internal data makes some operational risks hard to calculate with quantitative models. This is true for the IT risk or the risk that a bank will experience losses caused by IT System and Infrastructure failure. IT systems and infrastructure are getting more predominant and important in the banking industry which makes the IT risk even more important to quantify.  Purpose: The aim of this thesis is to find an appropriate way of modelling IT risk for the banking industry. Th...

  16. High risk process control system assessment methodology

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Venetia [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil); Zamberlan, Maria Cristina [National Institute of Tehnology (INT), Rio de Janeiro, RJ (Brazil). Human Reliability and Ergonomics Research Group for the Oil, Gas and Energy Sector

    2009-07-01

    The evolution of ergonomics methodology has become necessary due to the dynamics imposed by the work environment, by the increase of the need of human cooperation and by the high interaction between various sections within a company. In the last 25 years, as of studies made in the high risk process control, we have developed a methodology to evaluate these situations that focus on the assessment of activities and human cooperation, the assessment of context, the assessment of the impact of work of other sectors in the final activity of the operator, as well as the modeling of existing risks. (author)

  17. Applying probabilistic methods for assessments and calculations for accident prevention

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    The guidelines for the prevention of accidents require plant design-specific and radioecological calculations to be made in order to show that maximum acceptable expsoure values will not be exceeded in case of an accident. For this purpose, main parameters affecting the accident scenario have to be determined by probabilistic methods. This offers the advantage that parameters can be quantified on the basis of unambigious and realistic criteria, and final results can be defined in terms of conservativity. (DG) [de

  18. A Tutorial on Probablilistic Risk Assessement and its Role in Risk-Informed Decision Making

    Science.gov (United States)

    Dezfuli, Homayoon

    2010-01-01

    This slide presentation reviews risk assessment and its role in risk-informed decision making. It includes information on probabilistic risk assessment, typical risk management process, origins of risk matrix, performance measures, performance objectives and Bayes theorem.

  19. Postural risk assessment of mechanised firewood processing.

    Science.gov (United States)

    Spinelli, Raffaele; Aminti, Giovanni; De Francesco, Fabio

    2017-03-01

    The study assessed the postural risk of mechanised firewood processing with eight machines, representing the main technology solutions available on the market. Assessment was conducted with the Ovako Working posture Analysis System (OWAS) on 1000 still frames randomly extracted from videotaped work samples. The postural risk associated with firewood processing was variable and associated with technology type. Simple, manually operated new machines incurred a higher postural risk compared with semi- or fully automatic machines. In contrast, new semi-automatic and automatic machines were generally free from postural risk. In all cases, attention should be paid to postural risk that may occur during blockage resolution. The study did not cover the postural risk of firewood processing sites as a whole. The study provided useful information for selecting firewood processing machinery and for improving firewood machinery design, as part of a more articulate strategy aimed at enhancing the safety of firewood processing work sites. Practitioner Summary: The postural risk associated with mechanised firewood processing (eg cutting and splitting) depends on the type of equipment. Postural risk is highest (OWAS Action Category 2) with new in-line machines, designed for operation by a single worker. Fully automatic machines present minimum postural risk, except during blockage resolution.

  20. US EPA's Ecological Risk Assessment Support Center ...

    Science.gov (United States)

    BackgroundThe ERASC provides technical information and addresses scientific questions of concern or interest on topics relevant to ecological risk assessment at hazardous waste sites for EPA's Office of Solid Waste and Emergency Response (OSWER) personnel and the Office of Resource Conservation and Recovery (ORCR) staff. Requests are channeled to ERASC through the Ecological Risk Assessment Forum (ERAF). To assess emerging and complex scientific issues that require expert judgment, the ERASC relies on the expertise of scientists and engineers located throughout EPA's Office of Research and Development (ORD) labs and centers.ResponseERASC develops responses that reflect the state of the science for ecological risk assessment and also provides a communication point for the distribution of the responses to other interested parties. For further information, contact Ecology_ERASC@epa.gov or call 513-569-7940.

  1. Quantitative Risk Assessment of Contact Sensitization

    DEFF Research Database (Denmark)

    Api, Anne Marie; Belsito, Donald; Bickers, David

    2010-01-01

    Background: Contact hypersensitivity quantitative risk assessment (QRA) for fragrance ingredients is being used to establish new international standards for all fragrance ingredients that are potential skin sensitizers. Objective: The objective was to evaluate the retrospective clinical data...... as potential sensitizers. Methods: This article reviews clinical data for three fragrance ingredients cinnamic aldehyde, citral, and isoeugenol to assess the utility of the QRA approach for fragrance ingredients. Results: This assessment suggests that had the QRA approach been available at the time standards...

  2. Integration of second cancer risk calculations in a radiotherapy treatment planning system

    International Nuclear Information System (INIS)

    Hartmann, M; Schneider, U

    2014-01-01

    Second cancer risk in patients, in particular in children, who were treated with radiotherapy is an important side effect. It should be minimized by selecting an appropriate treatment plan for the patient. The objectives of this study were to integrate a risk model for radiation induced cancer into a treatment planning system which allows to judge different treatment plans with regard to second cancer induction and to quantify the potential reduction in predicted risk. A model for radiation induced cancer including fractionation effects which is valid for doses in the radiotherapy range was integrated into a treatment planning system. From the three-dimensional (3D) dose distribution the 3D-risk equivalent dose (RED) was calculated on an organ specific basis. In addition to RED further risk coefficients like OED (organ equivalent dose), EAR (excess absolute risk) and LAR (lifetime attributable risk) are computed. A risk model for radiation induced cancer was successfully integrated in a treatment planning system. Several risk coefficients can be viewed and used to obtain critical situations were a plan can be optimised. Risk-volume-histograms and organ specific risks were calculated for different treatment plans and were used in combination with NTCP estimates for plan evaluation. It is concluded that the integration of second cancer risk estimates in a commercial treatment planning system is feasible. It can be used in addition to NTCP modelling for optimising treatment plans which result in the lowest possible second cancer risk for a patient.

  3. Seismic risk assessment of a BWR

    International Nuclear Information System (INIS)

    Wells, J.E.; Bernreuter, D.L.; Chen, J.C.; Lappa, D.A.; Chuang, T.Y.; Murray, R.C.; Johnson, J.J.

    1987-01-01

    The simplified seismic risk methodology developed in the USNRC Seismic Safety Margins Research Program (SSMRP) was demonstrated by its application to the Zion nuclear power plant (PWR). The simplified seismic risk methodology was developed to reduce the costs associated with a seismic risk analysis while providing adequate results. A detailed model of Zion, including systems analysis models (initiating events, event trees, and fault trees), SSI and structure models, and piping models, was developed and used in assessing the seismic risk of the Zion nuclear power plant (FSAR). The simplified seismic risk methodology was applied to the LaSalle County Station nuclear power plant, a BWR; to further demonstrate its applicability, and if possible, to provide a basis for comparing the seismic risk from PWRs and BWRs. (orig./HP)

  4. Developing RESRAD-BASELINE for environmental baseline risk assessment

    International Nuclear Information System (INIS)

    Cheng, Jing-Jy.

    1995-01-01

    RESRAD-BASELINE is a computer code developed at Argonne developed at Argonne National Laboratory for the US Department of Energy (DOE) to perform both radiological and chemical risk assessments. The code implements the baseline risk assessment guidance of the US Environmental Protection Agency (EPA 1989). The computer code calculates (1) radiation doses and cancer risks from exposure to radioactive materials, and (2) hazard indexes and cancer risks from exposure to noncarcinogenic and carcinogenic chemicals, respectively. The user can enter measured or predicted environmental media concentrations from the graphic interface and can simulate different exposure scenarios by selecting the appropriate pathways and modifying the exposure parameters. The database used by PESRAD-BASELINE includes dose conversion factors and slope factors for radionuclides and toxicity information and properties for chemicals. The user can modify the database for use in the calculation. Sensitivity analysis can be performed while running the computer code to examine the influence of the input parameters. Use of RESRAD-BASELINE for risk analysis is easy, fast, and cost-saving. Furthermore, it ensures in consistency in methodology for both radiological and chemical risk analyses

  5. Nonparametric estimation of benchmark doses in environmental risk assessment

    Science.gov (United States)

    Piegorsch, Walter W.; Xiong, Hui; Bhattacharya, Rabi N.; Lin, Lizhen

    2013-01-01

    Summary An important statistical objective in environmental risk analysis is estimation of minimum exposure levels, called benchmark doses (BMDs), that induce a pre-specified benchmark response in a dose-response experiment. In such settings, representations of the risk are traditionally based on a parametric dose-response model. It is a well-known concern, however, that if the chosen parametric form is misspecified, inaccurate and possibly unsafe low-dose inferences can result. We apply a nonparametric approach for calculating benchmark doses, based on an isotonic regression method for dose-response estimation with quantal-response data (Bhattacharya and Kong, 2007). We determine the large-sample properties of the estimator, develop bootstrap-based confidence limits on the BMDs, and explore the confidence limits’ small-sample properties via a short simulation study. An example from cancer risk assessment illustrates the calculations. PMID:23914133

  6. Safety analysis, risk assessment, and risk acceptance criteria

    International Nuclear Information System (INIS)

    Jamali, K.

    1997-01-01

    This paper discusses a number of topics that relate safety analysis as documented in the Department of Energy (DOE) safety analysis reports (SARs), probabilistic risk assessments (PRA) as characterized primarily in the context of the techniques that have assumed some level of formality in commercial nuclear power plant applications, and risk acceptance criteria as an outgrowth of PRA applications. DOE SARs of interest are those that are prepared for DOE facilities under DOE Order 5480.23 and the implementing guidance in DOE STD-3009-94. It must be noted that the primary area of application for DOE STD-3009 is existing DOE facilities and that certain modifications of the STD-3009 approach are necessary in SARs for new facilities. Moreover, it is the hazard analysis (HA) and accident analysis (AA) portions of these SARs that are relevant to the present discussions. Although PRAs can be qualitative in nature, PRA as used in this paper refers more generally to all quantitative risk assessments and their underlying methods. HA as used in this paper refers more generally to all qualitative risk assessments and their underlying methods that have been in use in hazardous facilities other than nuclear power plants. This discussion includes both quantitative and qualitative risk assessment methods. PRA has been used, improved, developed, and refined since the Reactor Safety Study (WASH-1400) was published in 1975 by the Nuclear Regulatory Commission (NRC). Much debate has ensued since WASH-1400 on exactly what the role of PRA should be in plant design, reactor licensing, 'ensuring' plant and process safety, and a large number of other decisions that must be made for potentially hazardous activities. Of particular interest in this area is whether the risks quantified using PRA should be compared with numerical risk acceptance criteria (RACs) to determine whether a facility is 'safe.' Use of RACs requires quantitative estimates of consequence frequency and magnitude

  7. Improving antenatal risk assessment in women exposed to high risks.

    Science.gov (United States)

    Perry, Natasha; Newman, Louise K; Hunter, Mick; Dunlop, Adrian

    2015-01-01

    Antenatal substance use and related psychosocial risk factors are known to increase the likelihood of child protection involvement; less is known about the predictive nature of maternal reflective functioning (RF) in this population. This preliminary study assessed psychosocial and psychological risk factors for a group of substance dependent women exposed to high risks in pregnancy, and their impact on child protection involvement. Pregnant women on opiate substitution treatment (n = 11) and a comparison group (n = 15) were recruited during their third trimester to complete measures of RF (Pregnancy Interview), childhood trauma, mental health and psychosocial assessments. At postnatal follow-up, RF was reassessed (Parent Development Interview - Revised Short Version) and mother-infant dyads were videotaped to assess emotional availability (EA). Child protection services were contacted to determine if any concerns had been raised for infant safety. Significant between-group differences were observed for demographics, psychosocial factors, trauma and mental health symptoms. Unexpectedly, no significant differences were found for RF or EA between groups. Eight women in the 'exposed to high risks' group became involved with child protection services. Reflective functioning was not significantly associated with psychosocial risk factors, and therefore did not mediate the outcome of child protection involvement. Women 'exposed to high risks' were equally able to generate a model of their own and their infants' mental states and should not be seen within a deficit perspective. Further research is required to better understand the range of risk factors that predict child protection involvement in high risk groups. © The Author(s) 2013.

  8. Hazard assessment and risk management of offshore production chemicals

    International Nuclear Information System (INIS)

    Schobben, H.P.M.; Scholten, M.C.T.; Vik, E.A.; Bakke, S.

    1994-01-01

    There is a clear need for harmonization of the regulations with regard to the use and discharge of drilling and production chemicals in the North Sea. Therefore the CHARM (Chemical Hazard Assessment and Risk Management) model was developed. Both government (of several countries) and industry (E and P and chemical suppliers) participated in the project. The CHARM model is discussed and accepted by OSPARCON. The CHARM model consists of several modules. The model starts with a prescreening on the basis of hazardous properties like persistency, accumulation potential and the appearance on black lists. The core of the model.consists of modules for hazard assessment and risk analysis. Hazard assessment covers a general environmental evaluation of a chemical on the basis of intrinsic properties of that chemical. Risk analysis covers a more specific evaluation of the environmental impact from the use of a production chemical, or a combination of chemicals, under actual conditions. In the risk management module the user is guided to reduce the total risk of all chemicals used on a platform by the definition of measures in the most cost-effective way. The model calculates the environmental impact for the marine environment. Thereto three parts are distinguished: pelagic, benthic and food chain. Both hazard assessment and risk analysis are based on a proportional comparison of an estimated PEC with an estimated NEC. The PEC is estimated from the use, release, dilution and fate of the chemical and the NEC is estimated from the available toxicity data of the chemicals

  9. Upper Gastrointestinal Complications and Cardiovascular/Gastrointestinal Risk Calculator in Patients with Myocardial Infarction Treated with Aspirin.

    Science.gov (United States)

    Wen, Lei

    2017-08-20

    Aspirin is widely used for the prevention of cardiovascular and cerebrovascular diseases for the past few years. However, much attention has been paid to the adverse effects associated with aspirin such as gastrointestinal bleeding. How to weigh the benefits and hazards? The current study aimed to assess the feasibility of a cardiovascular/gastrointestinal risk calculator, AsaRiskCalculator, in predicting gastrointestinal events in Chinese patients with myocardial infarction (MI), determining unique risk factor(s) for gastrointestinal events to be considered in the calculator. The MI patients who visited Shapingba District People's Hospital between January 2012 and January 2016 were retrospectively reviewed. Based on gastroscopic data, the patients were divided into two groups: gastrointestinal and nongastrointestinal groups. Demographic and clinical data of the patients were then retrieved for statistical analysis. Univariate and multiple logistic regression analyses were used to identify independent risk factors for gastrointestinal events. The receiver operating characteristic (ROC) curves were used to assess the predictive value of AsaRiskCalculator for gastrointestinal events. A total of 400 MI patients meeting the eligibility criteria were analyzed, including 94 and 306 in the gastrointestinal and nongastrointestinal groups, respectively. The data showed that age, male gender, predicted gastrointestinal events, and Helicobacter pylori (HP) infection were positively correlated with gastrointestinal events. In multiple logistic regression analysis, predicted gastrointestinal events and HP infection were identified as risk factors for actual gastrointestinal events. HP infection was highly predictive in Chinese patients; the ROC curve indicated an area under the curve of 0.822 (95% confidence interval: 0.774-0.870). The best diagnostic cutoff point of predicted gastrointestinal events was 68.0‰, yielding sensitivity and specificity of 60.6% and 93

  10. Risks in hospitals. Assessment and Management

    Directory of Open Access Journals (Sweden)

    Bradea Ioana-Alexandra

    2014-12-01

    Full Text Available In a complex world, characterized by a multitude of risks, managers need to manage the risks they encounter, in an efficient way and in the shortest time possible. In the current economic crisis, the concept of hospital risk management, as the process in which is identified, analyzed, reduced, or avoided a risk that may affect the hospital, gained great importance. The Romanian health system, distinguished by: lack of transparency, poor funding, the loss of the valuable medical staff, lack of hospitals in villages and small towns, inability to engage patients due to the old and poor equipment, lack of research and problems in information privacy and cyber-security, requires an appropriate management, enabling risk managers to take decisions in order to avoid the occurrence of risks. Important for the functioning of every hospital is the perception of patients and their degree of satisfaction, regarding the quality of services, which depend largely on the quality of human resources. But what are the human resources weaknesses and risks from the patient point of view? What are the risk indicators which must be monitored to avoid risks? And also, which is the most useful method for measurement and assessment of risk?

  11. Update earthquake risk assessment in Cairo, Egypt

    Science.gov (United States)

    Badawy, Ahmed; Korrat, Ibrahim; El-Hadidy, Mahmoud; Gaber, Hanan

    2017-07-01

    The Cairo earthquake (12 October 1992; m b = 5.8) is still and after 25 years one of the most painful events and is dug into the Egyptians memory. This is not due to the strength of the earthquake but due to the accompanied losses and damages (561 dead; 10,000 injured and 3000 families lost their homes). Nowadays, the most frequent and important question that should rise is "what if this earthquake is repeated today." In this study, we simulate the same size earthquake (12 October 1992) ground motion shaking and the consequent social-economic impacts in terms of losses and damages. Seismic hazard, earthquake catalogs, soil types, demographics, and building inventories were integrated into HAZUS-MH to produce a sound earthquake risk assessment for Cairo including economic and social losses. Generally, the earthquake risk assessment clearly indicates that "the losses and damages may be increased twice or three times" in Cairo compared to the 1992 earthquake. The earthquake risk profile reveals that five districts (Al-Sahel, El Basateen, Dar El-Salam, Gharb, and Madinat Nasr sharq) lie in high seismic risks, and three districts (Manshiyat Naser, El-Waily, and Wassat (center)) are in low seismic risk level. Moreover, the building damage estimations reflect that Gharb is the highest vulnerable district. The analysis shows that the Cairo urban area faces high risk. Deteriorating buildings and infrastructure make the city particularly vulnerable to earthquake risks. For instance, more than 90 % of the estimated buildings damages are concentrated within the most densely populated (El Basateen, Dar El-Salam, Gharb, and Madinat Nasr Gharb) districts. Moreover, about 75 % of casualties are in the same districts. Actually, an earthquake risk assessment for Cairo represents a crucial application of the HAZUS earthquake loss estimation model for risk management. Finally, for mitigation, risk reduction, and to improve the seismic performance of structures and assure life safety

  12. Chemical Risk Assessment Screening Tool of a Global Chemical Company

    OpenAIRE

    Evelyn Tjoe-Nij; Christophe Rochin; Nathalie Berne; Alessandro Sassi; Antoine Leplay

    2018-01-01

    Background: This paper describes a simple-to-use and reliable screening tool called Critical Task Exposure Screening (CTES), developed by a chemical company. The tool assesses if the exposure to a chemical for a task is likely to be within acceptable levels. Methods: CTES is a Microsoft Excel tool, where the inhalation risk score is calculated by relating the exposure estimate to the corresponding occupational exposure limit (OEL) or occupational exposure band (OEB). The inhalation exposure i...

  13. Risk assessment for construction projects of transport infrastructure objects

    Science.gov (United States)

    Titarenko, Boris

    2017-10-01

    The paper analyzes and compares different methods of risk assessment for construction projects of transport objects. The management of such type of projects demands application of special probabilistic methods due to large level of uncertainty of their implementation. Risk management in the projects requires the use of probabilistic and statistical methods. The aim of the work is to develop a methodology for using traditional methods in combination with robust methods that allow obtaining reliable risk assessments in projects. The robust approach is based on the principle of maximum likelihood and in assessing the risk allows the researcher to obtain reliable results in situations of great uncertainty. The application of robust procedures allows to carry out a quantitative assessment of the main risk indicators of projects when solving the tasks of managing innovation-investment projects. Calculation of damage from the onset of a risky event is possible by any competent specialist. And an assessment of the probability of occurrence of a risky event requires the involvement of special probabilistic methods based on the proposed robust approaches. Practice shows the effectiveness and reliability of results. The methodology developed in the article can be used to create information technologies and their application in automated control systems for complex projects.

  14. An empirical method for calculating thermodynamic parameters for U(6) phases, applications to performance assessment calculations

    International Nuclear Information System (INIS)

    Ewing, R.C.; Chen, F.; Clark, S.B.

    2002-01-01

    Uranyl minerals form by oxidation and alteration of uraninite, UO 2+x , and the UO 2 in used nuclear fuels. The thermodynamic database for these phases is extremely limited. However, the Gibbs free energies and enthalpies for uranyl phases may be estimated based on a method that sums polyhedral contributions. The molar contributions of the structural components to Δ f G m 0 and Δ f H m 0 are derived by multiple regression using the thermodynamic data of phases for which the crystal structures are known. In comparison with experimentally determined values, the average residuals associated with the predicted Δ f G m 0 and Δ f H m 0 for the uranyl phases used in the model are 0.08 and 0.10%, respectively. There is also good agreement between the predicted mineral stability relations and field occurrences, thus providing confidence in this method for the estimation of Δ f G m 0 and Δ f H m 0 of the U(VI) phases. This approach provides a means of generating estimated thermodynamic data for performance assessment calcination and a basic for making bounding calcination of phase stabilities and solubilities. (author)

  15. OPPT workplan risk assessment for Trichloroethylene ...

    Science.gov (United States)

    The assessment will focus on uses of TCE as a degreaser and in consumer products used by individuals in the arts/crafts field. Given the range of endpoints (cancer, non-cancer; the latter includes potential effects on the developing fetus), it is expected that susceptible populations would be children (as bystanders physically near the actual consumer use of the products) and adults of all ages (including pregnant women). Thus, the assessment will focus on all human/lifestages. EPA anticipates issuing draft risk assessments for public review and comment as they are completed. At the conclusion of the review process, if an assessment of specific uses indicates significant risk, EPA will evaluate and pursue appropriate risk reduction actions, as warranted. If an assessment indicates no significant risk, EPA will conclude its current work on assessment of those specified targeted uses of that chemical. Over time, additional chemicals will be added to the work plan as more data are developed and more chemicals screened.

  16. Estimation, assessment and management of risks

    International Nuclear Information System (INIS)

    Reinoehl-Kompa, S.

    2005-01-01

    After the introductory lectures the closed conference divided into sessions on the estimation, assessment and management of risks. This review article summarises some of the central issues which were addressed in the discussions held during the closed conference and which may be of significance for the future work of the ''Radiation Risk'' Committee within the Radiation Protection Commission. Fundamental difficulties still persist in the implementation of risk quantities within the concepts of radiation protection (lectures by Breckow and Kiefer). Some of these difficulties have to do with the definition of dose quantities, in particular with the one most central to radiation protection, the effective dose. In the field of sparsely ionizing radiation attention was focused on two main topics, namely the risk of acquiring thyroid cancer in association with the Chernobyl desaster and analyses of new mortality data on the survivors of the nuclear bomb attacks on Hiroshima and Nagasaki. In the area of lung cancer risk from radon exposure, attention was focused on indoor exposure and the cohort study on bismuth miners. The body of knowledge that has accumulated on the risk of acquiring cancer through UV radiation takes a special position within the wider field of risks associated with nonionizing radiation, since much has already been achieved towards identifying the action mechanisms involved here. Since skin cancer shows the highest increments in incidence of all types of cancer, estimating the risk of acquiring skin cancer through UV radiation will be an important issue in future. One of the tasks of risk management is to translate the results of risk assessment into action. One task of particular importance in this regard is ''risk communication'', the problems surrounding which were illuminated from different perspectives in various contributions

  17. Radiation risk assessment of reprocessed uranium

    International Nuclear Information System (INIS)

    Cardenas, Hugo R.; Perez, Aldo E.; Luna, Manuel F.; Becerra, Fabian A.

    1999-01-01

    Reprocessed uranium contains 232 U, which is not found in nature, as well as 234 U which is present in higher proportion than in natural uranium. Both isotopes modify the radiological properties of the material. The paper evaluates the increase of the internal and external radiation risk on the base of experimental data and theoretical calculations. It also suggests measures to be taken in the production of fuel elements with slightly enriched uranium.The radiation risk of reprocessed uranium is directly proportional to the content of 232 U and 234 U as well as to the aging time of the material

  18. Seismic risk assessment of Navarre (Northern Spain)

    Science.gov (United States)

    Gaspar-Escribano, J. M.; Rivas-Medina, A.; García Rodríguez, M. J.; Benito, B.; Tsige, M.; Martínez-Díaz, J. J.; Murphy, P.

    2009-04-01

    on rock conditions (for the same probability level). Again, the highest hazard is found in the northeastern part of the region. The lowest hazard is obtained along major river valleys The vulnerability assessment of the Navarra building stock is accomplished using as proxy a combination of building age, location, number of floors and the implantation of building codes. Field surveys help constraining the extent of traditional and technological construction types. The vulnerability characterization is carried out following three methods: European Macroseismic Scale (EMS 98), RISK UE vulnerability index and the capacity spectrum method implemented in Hazus. Vulnerability distribution maps for each Navarrean municipality are provided, adapted to the EMS98 vulnerability classes. The vulnerability of Navarre is medium to high, except for recent urban, highly populated developments. For each vulnerability class and expected ground motion, damage distribution is estimated by means of damage probability matrixes. Several damage indexes, embracing relative and absolute damage estimates, are used. Expected average damage is low. Whereas the largest amounts of damaged structures are found in big cities, the highest percentages are obtained in some muniucipalities of northeastern Navarre. Additionally, expected percentages and amounts of affected persons by earthquake damage are calculated for each municipality. Expected amounts of affected people are low, reflecting the low expected damage degree.

  19. Status report on the EPRI fuel cycle accident risk assessment

    International Nuclear Information System (INIS)

    Erdmann, R.C.; Fullwood, R.R.; Garcia, A.A.; Mendoza, Z.T.; Ritzman, R.L.; Stevens, C.A.

    1979-07-01

    This report summarizes and extends the work reported in five unpublished draft reports: the accidental radiological risk of reprocessing spent fuel, mixed oxide fuel fabrication, the transportation of materials within the fuel cycle, and the disposal of nuclear wastes, and the routine atmospheric radiological risk of mining and milling uranium-bearing ore. Results show that the total risk contribution of the fuel cycle is only about 1% of the accident risk of the power plant and hence, with little error, the accident risk of nuclear electric power is that of the power plant itself. The power plant risk, assuming a very large usage of nuclear power by the year 2005, is only about 0.5% of the radiological risk of natural background. This work aims at a realistic assessment of the process hazards, the effectiveness of confinement and mitigation systems and procedures, and the associated likelihoods and estimated errors. The primary probabilistic estimation tool is fault tree analysis with the release source terms calculated using physical--chemical processes. Doses and health effects are calculated with the CRAC code. No evacuation or mitigation is considered: source terms may be conservative through the assumption of high fuel burnup (40,000 MWd/T) and short cooling (90 to 150 d); HEPA filter efficiencies are derived from experiments

  20. Risk Assessment Approaches for Carcinogenic Food Contaminants

    OpenAIRE

    Gillespie, Zoe; Pulido, Olga; Vavasour, Elizabeth

    2011-01-01

    Health Canada has identified the need for a standardized department-wide approach for the risk assessment of carcinogens in foods (e.g., pesticides, food chemical contaminants, veterinary therapeutics). A standardized approach would better facilitate and inform risk management strategies for the control of human exposure to food sources of carcinogens. Within the post- market regulatory context, directly DNA-reactive carcinogens are of most concern because any exposure is theoretically assume...

  1. Superfund risk assessment in soil contamination studies

    International Nuclear Information System (INIS)

    Hoddinott, K.B.

    1992-01-01

    This symposium was held in New Orleans, Louisiana on January 30-31, 1991. The purpose of the meeting was to provide a forum for exchange of information on risk assessment associated with soil contamination. The conference included presentations in the following categories: site characterization; fate and transport; toxicity, exposures, and receptors; risk characterization/case studies; and establishing cleanup levels. Individual papers have been cataloged separately for inclusion in the appropriate data bases

  2. A total risk assessment methodology for security assessment

    International Nuclear Information System (INIS)

    Auilar, Richard; Pless, Daniel J.; Kaplan, Paul Garry; Silva, Consuelo Juanita; Rhea, Ronald Edward; Wyss, Gregory Dane; Conrad, Stephen Hamilton

    2009-01-01

    Sandia National Laboratories performed a two-year Laboratory Directed Research and Development project to develop a new collaborative risk assessment method to enable decision makers to fully consider the interrelationships between threat, vulnerability, and consequence. A five-step Total Risk Assessment Methodology was developed to enable interdisciplinary collaborative risk assessment by experts from these disciplines. The objective of this process is promote effective risk management by enabling analysts to identify scenarios that are simultaneously achievable by an adversary, desirable to the adversary, and of concern to the system owner or to society. The basic steps are risk identification, collaborative scenario refinement and evaluation, scenario cohort identification and risk ranking, threat chain mitigation analysis, and residual risk assessment. The method is highly iterative, especially with regard to scenario refinement and evaluation. The Total Risk Assessment Methodology includes objective consideration of relative attack likelihood instead of subjective expert judgment. The 'probability of attack' is not computed, but the relative likelihood for each scenario is assessed through identifying and analyzing scenario cohort groups, which are groups of scenarios with comparable qualities to the scenario being analyzed at both this and other targets. Scenarios for the target under consideration and other targets are placed into cohort groups under an established ranking process that reflects the following three factors: known targeting, achievable consequences, and the resources required for an adversary to have a high likelihood of success. The development of these target cohort groups implements, mathematically, the idea that adversaries are actively choosing among possible attack scenarios and avoiding scenarios that would be significantly suboptimal to their objectives. An adversary who can choose among only a few comparable targets and scenarios (a

  3. The Risk Assessment at the Workplace of Assembly Operation

    Directory of Open Access Journals (Sweden)

    Marek Burda

    2014-01-01

    Full Text Available Risk Assessment Process by FMEA method involve hazard identification, risk assessment and risk control processes and their input is fundamental to a successful EH&S system. This Risk assessment tool follows the general process and requirements of the Health and Safety Risk Assessment Procedure.

  4. [Patient safety in antibiotics administration: Risk assessment].

    Science.gov (United States)

    Maqueda Palau, M; Pérez Juan, E

    To determine the level of risk in the preparation and administration of antibiotics frequently used in the Intensive Care Unit using a risk matrix. A study was conducted using situation analysis and literature review of databases, protocols and good practice guidelines on intravenous therapy, drugs, and their administration routes. The most used antibiotics in the ICU registered in the ENVIN-HELICS program from 1 April to 30 June 2015 were selected. In this period, 257 patients received antimicrobial treatment and 26 antibiotics were evaluated. Variables studied: A risk assessment of each antibiotic using the scale Risk Assessment Tool, of the National Patient Safety Agency, as well as pH, osmolarity, type of catheter recommended for administration, and compatibility and incompatibility with other antibiotics studied. Almost two-thirds (65.3%) of antibiotics had more than 3 risk factors (represented by a yellow stripe), with the remaining 34.7% of antibiotics having between 0 and 2 risk factors (represented by a green stripe). There were no antibiotics with 6 or more risk factors (represented by a red stripe). Most drugs needed reconstitution, additional dilution, and the use of part of the vial to administer the prescribed dose. More than half of the antibiotics studied had a moderate risk level; thus measures should be adopted in order to reduce it. The risk matrix is a useful tool for the assessment and detection of weaknesses associated with the preparation and administration of intravenous antibiotics. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

  5. Risk assessment techniques for civil aviation security

    Energy Technology Data Exchange (ETDEWEB)

    Tamasi, Galileo, E-mail: g.tamasi@enac.rupa.i [Ente Nazionale per l' Aviazione Civile-Direzione Progetti, Studi e Ricerche, Via di Villa Ricotti, 42, 00161 Roma (Italy); Demichela, Micaela, E-mail: micaela.demichela@polito.i [SAfeR-Centro Studi su Sicurezza, Affidabilita e Rischi, Dipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, Corso Duca degli Abruzzi, 24, 10129 Torino (Italy)

    2011-08-15

    Following the 9/11 terrorists attacks in New York a strong economical effort was made to improve and adapt aviation security, both in infrastructures as in airplanes. National and international guidelines were promptly developed with the objective of creating a security management system able to supervise the identification of risks and the definition and optimization of control measures. Risk assessment techniques are thus crucial in the above process, since an incorrect risk identification and quantification can strongly affect both the security level as the investments needed to reach it. The paper proposes a set of methodologies to qualitatively and quantitatively assess the risk in the security of civil aviation and the risk assessment process based on the threats, criticality and vulnerabilities concepts, highlighting their correlation in determining the level of risk. RAMS techniques are applied to the airport security system in order to analyze the protection equipment for critical facilities located in air-side, allowing also the estimation of the importance of the security improving measures vs. their effectiveness.

  6. Risk assessment techniques for civil aviation security

    International Nuclear Information System (INIS)

    Tamasi, Galileo; Demichela, Micaela

    2011-01-01

    Following the 9/11 terrorists attacks in New York a strong economical effort was made to improve and adapt aviation security, both in infrastructures as in airplanes. National and international guidelines were promptly developed with the objective of creating a security management system able to supervise the identification of risks and the definition and optimization of control measures. Risk assessment techniques are thus crucial in the above process, since an incorrect risk identification and quantification can strongly affect both the security level as the investments needed to reach it. The paper proposes a set of methodologies to qualitatively and quantitatively assess the risk in the security of civil aviation and the risk assessment process based on the threats, criticality and vulnerabilities concepts, highlighting their correlation in determining the level of risk. RAMS techniques are applied to the airport security system in order to analyze the protection equipment for critical facilities located in air-side, allowing also the estimation of the importance of the security improving measures vs. their effectiveness.

  7. A geographical basis for long-range dose assessment calculations

    International Nuclear Information System (INIS)

    Walker, H.; Hage, G.

    1989-01-01

    Releases of radioactive material into the atmosphere have effects that are distributed over the earth's surface. As a result, geographical information can play an important role in understanding the impact of an emergency. The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory is an emergency response organization that utilizes complex computer models to provide real-time assessments of the consequences of such releases. These models are one component of a sophisticated system that also includes data-gathering systems, data analysis techniques, and highly trained operational personnel. The products of this service are isopleths of the material concentration plotted over a base map of geographic features. The components mentioned in this paper are being added to the operation ARAC system. This will provide a means of producing fast, high-quality assessments of the consequences of major releases of radioactive material with effects extending to continental and global regions

  8. Application of CFD dispersion calculation in risk based inspection for release of H2S

    International Nuclear Information System (INIS)

    Sharma, Pavan K.; Vinod, Gopika; Singh, R.K.; Rao, V.V.S.S.; Vaze, K.K.

    2011-01-01

    In atmospheric dispersion both deterministic and probabilistic approached have been used for addressing design and regulatory concerns. In context of deterministic calculations the amount of pollutants dispersion in the atmosphere is an important area wherein different approaches are followed in development of good analytical model. The analysis based on Computational Fluid Dynamics (CFD) codes offer an opportunity of model development based on first principles of physics and hence such models have an edge over the existing models. In context of probabilistic methods applying risk based inspection (wherein consequence of failure from each component needs to be assessed) are becoming popular. Consequence evaluation in a process plant is a crucial task. Often the number of components considered for life management will be too huge. Also consequence evaluation of all the components proved to be laborious task. The present paper is the results of joint collaborative work from deterministic and probabilistic modelling group working in the field of atmospheric dispersion. Even though API 581 has simplified qualitative approach, regulators find the some of the factors, in particular, quantity factor, not suitable for process plants. Often dispersion calculations for heavy gas are done with very simple model which can not take care of density based atmospheric dispersion. This necessitates a new approach with a CFD based technical basis is proposed, so that the range of quantity considered along with factors used can be justified. The present paper is aimed at bringing out some of the distinct merits and demerits of the CFD based models. A brief account of the applications of such CFD codes reported in literature is also presented in the paper. This paper describes the approach devised and demonstrated for the said issue with emphasis of CFD calculations. (author)

  9. Korean risk assessment model for breast cancer risk prediction.

    Science.gov (United States)

    Park, Boyoung; Ma, Seung Hyun; Shin, Aesun; Chang, Myung-Chul; Choi, Ji-Yeob; Kim, Sungwan; Han, Wonshik; Noh, Dong-Young; Ahn, Sei-Hyun; Kang, Daehee; Yoo, Keun-Young; Park, Sue K

    2013-01-01

    We evaluated the performance of the Gail model for a Korean population and developed a Korean breast cancer risk assessment tool (KoBCRAT) based upon equations developed for the Gail model for predicting breast cancer risk. Using 3,789 sets of cases and controls, risk factors for breast cancer among Koreans were identified. Individual probabilities were projected using Gail's equations and Korean hazard data. We compared the 5-year and lifetime risk produced using the modified Gail model which applied Korean incidence and mortality data and the parameter estimators from the original Gail model with those produced using the KoBCRAT. We validated the KoBCRAT based on the expected/observed breast cancer incidence and area under the curve (AUC) using two Korean cohorts: the Korean Multicenter Cancer Cohort (KMCC) and National Cancer Center (NCC) cohort. The major risk factors under the age of 50 were family history, age at menarche, age at first full-term pregnancy, menopausal status, breastfeeding duration, oral contraceptive usage, and exercise, while those at and over the age of 50 were family history, age at menarche, age at menopause, pregnancy experience, body mass index, oral contraceptive usage, and exercise. The modified Gail model produced lower 5-year risk for the cases than for the controls (p = 0.017), while the KoBCRAT produced higher 5-year and lifetime risk for the cases than for the controls (pKorean women, especially urban women.

  10. Assessment of health risks of policies

    International Nuclear Information System (INIS)

    Ádám, Balázs; Molnár, Ágnes; Ádány, Róza; Bianchi, Fabrizio; Bitenc, Katarina; Chereches, Razvan; Cori, Liliana; Fehr, Rainer; Kobza, Joanna; Kollarova, Jana

    2014-01-01

    The assessment of health risks of policies is an inevitable, although challenging prerequisite for the inclusion of health considerations in political decision making. The aim of our project was to develop a so far missing methodological guide for the assessment of the complex impact structure of policies. The guide was developed in a consensual way based on experiences gathered during the assessment of specific national policies selected by the partners of an EU project. Methodological considerations were discussed and summarized in workshops and pilot tested on the EU Health Strategy for finalization. The combined tool, which includes a textual guidance and a checklist, follows the top-down approach, that is, it guides the analysis of causal chains from the policy through related health determinants and risk factors to health outcomes. The tool discusses the most important practical issues of assessment by impact level. It emphasises the transparent identification and prioritisation of factors, the consideration of the feasibility of exposure and outcome assessment with special focus on quantification. The developed guide provides useful methodological instructions for the comprehensive assessment of health risks of policies that can be effectively used in the health impact assessment of policy proposals. - Highlights: • Methodological guide for the assessment of health risks of policies is introduced. • The tool is developed based on the experiences from several case studies. • The combined tool consists of a textual guidance and a checklist. • The top-down approach is followed through the levels of the full impact chain. • The guide provides assistance for the health impact assessment of policy proposals

  11. Assessment of health risks of policies

    Energy Technology Data Exchange (ETDEWEB)

    Ádám, Balázs, E-mail: badam@cmss.sdu.dk [Unit for Health Promotion Research, Faculty of Health Sciences, University of Southern Denmark, Niels Bohrs Vej 9, DK-6700 Esbjerg (Denmark); Department of Preventive Medicine, Faculty of Public Health, University of Debrecen, P.O. Box 9, H-4012 Debrecen (Hungary); Molnár, Ágnes, E-mail: MolnarAg@smh.ca [Department of Preventive Medicine, Faculty of Public Health, University of Debrecen, P.O. Box 9, H-4012 Debrecen (Hungary); Centre for Research on Inner City Health, Keenan Research Centre, Li Ka Shing Knowledge Institute, St Michael' s Hospital, Victoria 209, Rm. 3-26.22, M5B 1C6 Toronto, Ontario (Canada); Ádány, Róza, E-mail: adany.roza@sph.unideb.hu [Department of Preventive Medicine, Faculty of Public Health, University of Debrecen, P.O. Box 9, H-4012 Debrecen (Hungary); Bianchi, Fabrizio, E-mail: Fabriepi@ifc.cnr.it [Unit of Environmental Epidemiology, Institute of Clinical Physiology, National Council of Research, Moruzzi 1, 56124 Pisa (Italy); Bitenc, Katarina, E-mail: katarina.bitenc@ivz-rs.si [National Institute of Public Health, Trubarjeva 2, SI-1000 Ljubljana (Slovenia); Chereches, Razvan, E-mail: razvan.m.chereches@gmail.com [Faculty of Political, Administrative and Communication Sciences, Babes-Bolyai University, Strada Mihail Kogalniceanu 1, 3400 Cluj (Romania); Cori, Liliana, E-mail: liliana.cori@ifc.cnr.it [Unit of Environmental Epidemiology, Institute of Clinical Physiology, National Council of Research, Moruzzi 1, 56124 Pisa (Italy); Fehr, Rainer, E-mail: rainer.fehr@uni-bielefeld.de [NRW Centre for Health, Westerfeldstr. 35-37, 33611 Bielefeld (Germany); Kobza, Joanna, E-mail: koga1@poczta.onet.pl [Public Health Department, Silesian Medical University, 18 Medykow Street, 40-752 Katowice (Poland); Kollarova, Jana, E-mail: janakollarova@yahoo.com [Department of Health Promotion, Regional Public Health Authority, Ipelska 1, 04011 Kosice (Slovakia); and others

    2014-09-15

    The assessment of health risks of policies is an inevitable, although challenging prerequisite for the inclusion of health considerations in political decision making. The aim of our project was to develop a so far missing methodological guide for the assessment of the complex impact structure of policies. The guide was developed in a consensual way based on experiences gathered during the assessment of specific national policies selected by the partners of an EU project. Methodological considerations were discussed and summarized in workshops and pilot tested on the EU Health Strategy for finalization. The combined tool, which includes a textual guidance and a checklist, follows the top-down approach, that is, it guides the analysis of causal chains from the policy through related health determinants and risk factors to health outcomes. The tool discusses the most important practical issues of assessment by impact level. It emphasises the transparent identification and prioritisation of factors, the consideration of the feasibility of exposure and outcome assessment with special focus on quantification. The developed guide provides useful methodological instructions for the comprehensive assessment of health risks of policies that can be effectively used in the health impact assessment of policy proposals. - Highlights: • Methodological guide for the assessment of health risks of policies is introduced. • The tool is developed based on the experiences from several case studies. • The combined tool consists of a textual guidance and a checklist. • The top-down approach is followed through the levels of the full impact chain. • The guide provides assistance for the health impact assessment of policy proposals.

  12. Risks assessment and comparison: Interest and feasibility

    International Nuclear Information System (INIS)

    Coulon, Rene

    1989-01-01

    Comparative risk assessment and risk management have become a real discipline, requiring a scientific approach. This is due to the increasing need to take account of risks in the decision processes together with other economic, social or political considerations. Although the notion of risk is generally associated with emergency situations, it seems necessary to pay more attention to those situations which are considered as normal situations but could be responsible for a significant part of the observed health effects. In this context, a research programme entitled Programme Grand Delta has been developed at a regional level: its aim is to provide a clear and simple representation of the risks to which the population living in this area is exposed. (author)

  13. Environmental health risk assessment: Energy systems

    International Nuclear Information System (INIS)

    Krewski, D.; Somers, E.; Winthrop, S.O.

    1984-01-01

    Most industrialized nations have come to rely on a variety of systems for energy production, both of a conventional and non-conventional nature. In the paper, the spectrum of energy systems currently in use in Canada is outlined along with their potential health risks. Several examples of environmental health studies involving both outdoor and indoor air pollution related to energy production in Canada are reported. The limitations of current technologies for assessing health risks are discussed and possible approaches to managing energy related health risks are indicated. (author)

  14. Risk assessment techniques for industrial installations

    International Nuclear Information System (INIS)

    Croitoru, C.; Dumitrescu, M.; Preda, I.; Stefanescu, I.; Titescu, G.

    1995-01-01

    This paper presents a risk analysis which concerns the following stages: identification of the initiation events, evaluation of the occurrence frequency of different accident sequences, assessment of human, economical, and environmental consequences, risk assessment and management. The study of the accident sequences subsequent to an initiation event was achieved by the event tree method. Also, there were developed methods based on mathematical models of installations which take into account reliability data, data concerning the exploitation history, and data referring to the human factor effects in the installation operation. These methods were used for the determination of occurrence frequencies of hydrogen sulfide emission accidents in the heavy water production installations

  15. Documentation design for probabilistic risk assessment

    International Nuclear Information System (INIS)

    Parkinson, W.J.; von Herrmann, J.L.

    1985-01-01

    This paper describes a framework for documentation design of probabilistic risk assessment (PRA) and is based on the EPRI document NP-3470 ''Documentation Design for Probabilistic Risk Assessment''. The goals for PRA documentation are stated. Four audiences are identified which PRA documentation must satisfy, and the documentation consistent with the needs of the various audiences are discussed, i.e., the Summary Report, the Executive Summary, the Main Report, and Appendices. The authors recommend the documentation specifications discussed herein as guides rather than rigid definitions

  16. New method for assessing risks of email

    Science.gov (United States)

    Raja, Seyyed H.; Afrooz, Farzad

    2013-03-01

    E-mail technology, has become one of the requirements of human lives for correspondence between individuals. Given this, the important point is that the messages, server and client of e-mail and correspondences that exchanged between different people have acceptable security, to make people sure to use of this technology. In the information age, many of financial and non financial transactions are done electronically, data exchange takes place via the internet and theft and manipulation of data can make exorbitant cost in terms of integrity, financial, political, economic and culture. E-mail correspondence in there is same and it is very important. With review took place, a method that will focus on email system for risks assessment is not provided. We are examining ways of assessing for other systems and their strengths and weaknesses, then we use Mr Convery method for assessing email risks which it is for assessing network risks. At the end of paper we have offered special table for email risk assessment.

  17. Energy balance calculations and assessment of two thermochemical sulfur cycles

    International Nuclear Information System (INIS)

    Leger, D.; Lessart, P.; Manaud, J.P.; Benizri, R.; Courvoisier, P.

    1978-01-01

    Thermochemical cyclic processes which include the highly endothermal decomposition of sulphuric acid are promising for hydrogen production by water-splitting. Our study is directed toward two cycles of this family, each involving the formation and decomposition of sulphuric acid and including other reactions using iron sulphide for the first and oxides and bromides of copper and magnesium for the second. Thermochemical analyses of the two cycles are undertaken. Thermodynamic studies of the reactions are carried out, taking into account possible side-reactions. The concentration of reactants, products and by-products resulting from simultaneous equilibria are calculated, the problems of separation thoroughly studied and the flow-diagrams of the processes drawn up. Using as heat source the helium leaving a 3000 MWth high temperature nuclear reactor and organizing internal heat exchange the enthalpy diagrams are drawn up and the net energy balances evaluated. The overall thermal efficiencies are about 28%, a value corresponding to non-optimized process schemes. Possible improvements aiming at energy-saving and increased efficiency are indicated

  18. Calculation of health risks from spent-nuclear-fuel transportation accidents

    International Nuclear Information System (INIS)

    Chen, S.Y.; Yuan, Y.C.

    1987-01-01

    Models developed to analyze potential radiological health risks from various accident scenarios during transportation of spent nuclear fuels are described. The models are designed both for detailed route-specific risk analyses and for use in conducting overall risk analyses for route selection and related decision-making activities. The radiological risks calculated include individual dose commitments, collective dose commitments, and long-term (100-year) environmental dose commitments to a population following release of radioactivity. To facilitate route-specific analysis, a state-level database was developed and incorporated into the model. Route-specific analysis is demonstrated by the calculation of radiological risks resulting from various accident scenarios, as postulated by the recent US Nuclear Regulatory Commission Modal Study, for four representative states selected from various regions of the United States. 10 refs., 3 figs., 3 tabs

  19. Health effects of risk-assessment categories

    International Nuclear Information System (INIS)

    Kramer, C.F.; Rybicka, K.; Knutson, A.; Morris, S.C.

    1983-10-01

    Environmental and occupational health effects associated with exposures to various chemicals are a subject of increasing concern. One recently developed methodology for assessing the health impacts of various chemical compounds involves the classification of similar chemicals into risk-assessment categories (RACs). This report reviews documented human health effects for a broad range of pollutants, classified by RACs. It complements other studies that have estimated human health effects by RAC based on analysis and extrapolation of data from animal research

  20. Health effects of risk-assessment categories

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, C.F.; Rybicka, K.; Knutson, A.; Morris, S.C.

    1983-10-01

    Environmental and occupational health effects associated with exposures to various chemicals are a subject of increasing concern. One recently developed methodology for assessing the health impacts of various chemical compounds involves the classification of similar chemicals into risk-assessment categories (RACs). This report reviews documented human health effects for a broad range of pollutants, classified by RACs. It complements other studies that have estimated human health effects by RAC based on analysis and extrapolation of data from animal research.

  1. Epidural catheterization in cardiac surgery: The 2012 risk assessment

    Directory of Open Access Journals (Sweden)

    Thomas M Hemmerling

    2013-01-01

    Full Text Available Aims and Objectives: The risk assessment of epidural hematoma due to catheter placement in patients undergoing cardiac surgery is essential since its benefits have to be weighed against risks, such as the risk of paraplegia. We determined the risk of the catheter-related epidural hematoma in cardiac surgery based on the cases reported in the literature up to September 2012. Materials and Methods: We included all reported cases of epidural catheter placement for cardiac surgery in web and in literature from 1966 to September 2012. Risks of other medical and non-medical activities were retrieved from recent reviews or national statistical reports. Results: Based on our analysis the risk of catheter-related epidural hematoma is 1 in 5493 with a 95% confidence interval (CI of 1/970-1/31114. The risk of catheter-related epidural hematoma in cardiac surgery is similar to the risk in the general surgery population at 1 in 6,628 (95% CI 1/1,170-1/37,552. Conclusions: The present risk calculation does not justify not offering epidural analgesia as part of a multimodal analgesia protocol in cardiac surgery.

  2. Can we (actually) assess global risk?

    Science.gov (United States)

    Di Baldassarre, Giuliano

    2013-04-01

    The evaluation of the dynamic interactions of the different components of global risk (e.g. hazard, exposure, vulnerability or resilience) is one of the main challenges in risk assessment and management. In state-of-the-art approaches for the analysis of risk, natural and socio-economic systems are typically treated separately by using different methods. In flood risk studies, for instance, physical scientists typically focus on the study of the probability of flooding (i.e. hazard), while social scientists mainly examine the exposure, vulnerability or resilience to flooding. However, these different components are deeply interconnected. Changes in flood hazard might trigger changes in vulnerability, and vice versa. A typical example of these interactions is the so-called "levee effect", whereby heightening levees to reduce the probability of flooding often leads to increase the potential adverse consequences of flooding as people often perceive that flood risk was completely eliminated once the levee was raised. These interconnections between the different components of risk remain largely unexplored and poorly understood. This lack of knowledge is of serious concern as it limits our ability to plan appropriate risk prevention measures. To design flood control structures, for example, state-of-the-art models can indeed provide quantitative assessments of the corresponding risk reduction associated to the lower probability of flooding. Nevertheless, current methods cannot estimate how, and to what extent, such a reduction might trigger a future increase of the potential adverse consequences of flooding (the aforementioned "levee effect"). Neither can they evaluate how the latter might (in turn) lead to the requirement of additional flood control structures. Thus, while many progresses have been made in the static assessment of flood risk, more inter-disciplinary research is required for the development of methods for dynamic risk assessment, which is very much

  3. Aquatic risk assessment of the new rice herbicide profoxydim

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, Paloma [Laboratory for Ecotoxicology, Department of the Environment, INIA, Crta De La Coruna Km 7, 28040 Madrid (Spain)]. E-mail: arguello@inia.es; Kubitza, Johanna [BASF-AG, Agricultural Center Limburgerhof, P.O. Box 120, D-67114 Limburgerhof (Germany); Peter Dohmen, G. [BASF-AG, Agricultural Center Limburgerhof, P.O. Box 120, D-67114 Limburgerhof (Germany); Tarazona, Jose V. [Laboratory for Ecotoxicology, Department of the Environment, INIA, Crta De La Coruna Km 7, 28040 Madrid (Spain)

    2006-07-15

    A tiered protocol for assessing ecological risks has been applied to the rice pesticide profoxydim. The initial assessment (Tier I) was based on toxicity exposure ratio (TER) calculations based on laboratory data using a worst-case rice scenario. The first refinement (Tier II) was based on direct toxicity assessment (DTA) of water samples collected during a field-mesocosm study. Finally, a higher-tier assessment on the in situ assessment of paddy community responses (field-mesocosm-Tier III) was performed. A successive application of three pesticides, the herbicides azimsulfuron, propanil and the insecticide malathion, was used as reference controls. The refined assessments indicated a lower risk than that predicted from TER estimations. DTA-based Tier II showed toxicity effects only for concentrations above the recommended dose of profoxydim. Effects for reference controls were observed in DTA which were not expected from Tier I. The field-mesocosm study confirmed these effects but also showed that they were transient and of low relevance. - Risk refinement assessment of rice pesticides starting with DTA and moving to community studies is a cost-effective approach, only if required.

  4. Aquatic risk assessment of the new rice herbicide profoxydim

    International Nuclear Information System (INIS)

    Sanchez, Paloma; Kubitza, Johanna; Peter Dohmen, G.; Tarazona, Jose V.

    2006-01-01

    A tiered protocol for assessing ecological risks has been applied to the rice pesticide profoxydim. The initial assessment (Tier I) was based on toxicity exposure ratio (TER) calculations based on laboratory data using a worst-case rice scenario. The first refinement (Tier II) was based on direct toxicity assessment (DTA) of water samples collected during a field-mesocosm study. Finally, a higher-tier assessment on the in situ assessment of paddy community responses (field-mesocosm-Tier III) was performed. A successive application of three pesticides, the herbicides azimsulfuron, propanil and the insecticide malathion, was used as reference controls. The refined assessments indicated a lower risk than that predicted from TER estimations. DTA-based Tier II showed toxicity effects only for concentrations above the recommended dose of profoxydim. Effects for reference controls were observed in DTA which were not expected from Tier I. The field-mesocosm study confirmed these effects but also showed that they were transient and of low relevance. - Risk refinement assessment of rice pesticides starting with DTA and moving to community studies is a cost-effective approach, only if required

  5. Ecosystem services as assessment endpoints for ecological risk assessment.

    Science.gov (United States)

    Munns, Wayne R; Rea, Anne W; Suter, Glenn W; Martin, Lawrence; Blake-Hedges, Lynne; Crk, Tanja; Davis, Christine; Ferreira, Gina; Jordan, Steve; Mahoney, Michele; Barron, Mace G

    2016-07-01

    Ecosystem services are defined as the outputs of ecological processes that contribute to human welfare or have the potential to do so in the future. Those outputs include food and drinking water, clean air and water, and pollinated crops. The need to protect the services provided by natural systems has been recognized previously, but ecosystem services have not been formally incorporated into ecological risk assessment practice in a general way in the United States. Endpoints used conventionally in ecological risk assessment, derived directly from the state of the ecosystem (e.g., biophysical structure and processes), and endpoints based on ecosystem services serve different purposes. Conventional endpoints are ecologically important and susceptible entities and attributes that are protected under US laws and regulations. Ecosystem service endpoints are a conceptual and analytical step beyond conventional endpoints and are intended to complement conventional endpoints by linking and extending endpoints to goods and services with more obvious benefit to humans. Conventional endpoints can be related to ecosystem services even when the latter are not considered explicitly during problem formulation. To advance the use of ecosystem service endpoints in ecological risk assessment, the US Environmental Protection Agency's Risk Assessment Forum has added generic endpoints based on ecosystem services (ES-GEAE) to the original 2003 set of generic ecological assessment endpoints (GEAEs). Like conventional GEAEs, ES-GEAEs are defined by an entity and an attribute. Also like conventional GEAEs, ES-GEAEs are broadly described and will need to be made specific when applied to individual assessments. Adoption of ecosystem services as a type of assessment endpoint is intended to improve the value of risk assessment to environmental decision making, linking ecological risk to human well-being, and providing an improved means of communicating those risks. Integr Environ Assess Manag

  6. Analysis of existing risk assessments, and list of suggestions

    CERN Document Server

    Heimsch, Laura

    2016-01-01

    The scope of this project was to analyse risk assessments made at CERN and extracting some crucial information about the different methodologies used, profiles of people who make the risk assessments, and gathering information of whether the risk matrix was used and if the acceptable level of risk was defined. Second step of the project was to trigger discussion inside HSE about risk assessment by suggesting a risk matrix and a risk assessment template.

  7. Risk assessment and management logistics chains

    Directory of Open Access Journals (Sweden)

    Vladimir Vikulov

    2014-03-01

    Full Text Available Background: In the context of economic globalization and increasing complexity of economic relations enterprises need methods and techniques to improve and sustain their position on the global market. Integration processes offer business new opportunities, but at the same time present new challenges for the management, including the key objectives of the risk management. Method: On the basis of analysis tools known from the pertinent literature (Supply Chain Management and Supply Chain Risk Management methods, methods of probability theory, methods of risk management, methods of statistics the authors of this paper proposed their own risk assessment method and the method of management of logistics chains. The proposed tool is a specific hybrid of solutions known from the literature. Results: The presented method has been successfully used within the frames of economic-mathematical model of industrial enterprises. Indicators of supply chain risks, including risks caused by supplier are considered in this paper. Authors formed a method of optimizing the level of supply chain risk in the integration with suppliers and customers. Conclusion: Every organization, which starting the process of integration with supplier and customers, needs to use tools, methodologies and techniques for identification of "weak links" in the supply chain. The proposed method allows to fix risk origin places in various links of the supply chain and to identify "weak links" of a logistic chain that may occur in the future. The method is a useful tool for managing not only risks and risk situations, but also to improve the efficiency of current assets management by providing the ability to optimize the level of risk in the current assets management of the industrial enterprise.

  8. Exploring the uncertainties in cancer risk assessment using the integrated probabilistic risk assessment (IPRA) approach.

    Science.gov (United States)

    Slob, Wout; Bakker, Martine I; Biesebeek, Jan Dirk Te; Bokkers, Bas G H

    2014-08-01

    Current methods for cancer risk assessment result in single values, without any quantitative information on the uncertainties in these values. Therefore, single risk values could easily be overinterpreted. In this study, we discuss a full probabilistic cancer risk assessment approach in which all the generally recognized uncertainties in both exposure and hazard assessment are quantitatively characterized and probabilistically evaluated, resulting in a confidence interval for the final risk estimate. The methodology is applied to three example chemicals (aflatoxin, N-nitrosodimethylamine, and methyleugenol). These examples illustrate that the uncertainty in a cancer risk estimate may be huge, making single value estimates of cancer risk meaningless. Further, a risk based on linear extrapolation tends to be lower than the upper 95% confidence limit of a probabilistic risk estimate, and in that sense it is not conservative. Our conceptual analysis showed that there are two possible basic approaches for cancer risk assessment, depending on the interpretation of the dose-incidence data measured in animals. However, it remains unclear which of the two interpretations is the more adequate one, adding an additional uncertainty to the already huge confidence intervals for cancer risk estimates. © 2014 Society for Risk Analysis.

  9. Handling Interdependencies in Climate Change Risk Assessment

    Directory of Open Access Journals (Sweden)

    Richard J. Dawson

    2015-12-01

    Full Text Available Typically, a climate change risk assessment focuses on individual sectors or hazards. However, interdependencies between climate risks manifest themselves via functional, physical, geographical, economic, policy and social mechanisms. These can occur over a range of spatial or temporal scales and with different strengths of coupling. Three case studies are used to demonstrate how interdependencies can significantly alter the nature and magnitude of risk, and, consequently, investment priorities for adaptation. The three examples explore interdependencies that arise from (1 climate loading dependence; (2 mediation of two climate impacts by physical processes operating over large spatial extents; and, (3 multiple risks that are influenced by shared climatic and socio-economic drivers. Drawing upon learning from these case studies, and other work, a framework for the analysis and consideration of interdependencies in climate change risk assessment has been developed. This is an iterative learning loop that involves defining the system, scoping interaction mechanisms, applying appropriate modelling tools, identifying vulnerabilities and opportunities, and assessing the performance of adaptation interventions.

  10. Risk assessment for SAGD well blowouts

    Energy Technology Data Exchange (ETDEWEB)

    Worth, D.; Alhanati, F.; Lastiwka, M. [C-FER Technologies, Edmonton, AB (Canada); Crepin, S. [Petrocedeno, Caracas (Venezuela)

    2008-10-15

    This paper discussed a steam assisted gravity drainage (SAGD) pilot project currently being conducted in Venezuela's Orinoco Belt. A risk assessment was conducted as part of the pilot program in order to evaluate the use of single barrier completions in conjunction with a blowout response plan. The study considered 3 options: (1) an isolated double barrier completion with a downhole safety valve (DHSV) in the production tubing string and a packer in the production casing annulus; (2) a partially isolated completion with no DHSV and a packer in the production casing annulus; and (3) an open single barrier completion with no additional downhole barriers. A reservoir model was used to assess the blowout flowing potential of SAGD well pairs. The probability of a blowout was estimated using fault tree analysis techniques. Risk was determined for various blowout scenarios, including blowouts during normal and workover operations, as well as blowouts through various flow paths. Total risk for each completion scenario was also determined at 3 different time periods within the production life of the well pair. The possible consequences of a blowout were assessed using quantitative consequence models. Results of the study showed that environmental and economic risks were much higher for the open completion technique. Higher risks were also associated with the earlier life of the completion strings. 20 refs., 3 tabs., 19 figs.

  11. Radiological Risk Assessment of Capstone Depleted Uranium Aerosols

    International Nuclear Information System (INIS)

    Hahn, Fletcher; Roszell, Laurie E.; Daxon, Eric G.; Guilmette, Ray A.; Parkhurst, MaryAnn

    2009-01-01

    Assessment of the health risk from exposure to aerosols of depleted uranium (DU) is an important outcome of the Capstone aerosol studies that established exposure ranges to personnel in armored combat vehicles perforated by DU munitions. Although the radiation exposure from DU is low, there is concern that DU deposited in the body may increase cancer rates. Radiation doses to various organs of the body resulting from the inhalation of DU aerosols measured in the Capstone studies were calculated using International Commission on Radiological Protection (ICRP) models. Organs and tissues with the highest calculated committed equivalent 50-yr doses were lung and extrathoracic tissues (nose and nasal passages, pharynx, larynx, mouth and thoracic lymph nodes). Doses to the bone surface and kidney were about 5 to 10% of the doses to the extrathoracic tissues. The methodologies of the ICRP International Steering Committee on Radiation Standards (ISCORS) were used for determining the whole body cancer risk. Organ-specific risks were estimated using ICRP and U.S. Environmental Protection Agency (EPA) methodologies. Risks for crew members and first responders were determined for selected scenarios based on the time interval of exposure and for vehicle and armor type. The lung was the organ with the highest cancer mortality risk, accounting for about 97% of the risks summed from all organs. The highest mean lifetime risk for lung cancer for the scenario with the longest exposure time interval (2 h) was 0.42%. This risk is low compared with the natural or background risk of 7.35%. These risks can be significantly reduced by using an existing ventilation system (if operable) and by reducing personnel time in the vehicle immediately after perforation

  12. RISK CONCEPT AND RISK ASSESSMENT IN EPIDEMIOLOGIC STUDIES

    Directory of Open Access Journals (Sweden)

    Gamze CAN

    2006-10-01

    Full Text Available Basic aim of an epidemiological study is to quantify the association between the exposure and the outcome of interest. To achieve this, the incidence of disease in a group of individuals exposed to the putative risk factors must be compared with the incidence in a group of persons not exposed. This comparison can be summarized by calculating either the ratio of the measures of disease occurrence for the two groups, which indicates the likelihood of developing the disease in the exposed individuals relative to those unexposed, or the difference between the two, which provides information about the absolute effect of the exposure in those exposed compared with those unexposed. Some terms about relative risk were explained and examine with samples in this article. [TAF Prev Med Bull 2006; 5(5.000: 374-381

  13. A clustering approach to segmenting users of internet-based risk calculators.

    Science.gov (United States)

    Harle, C A; Downs, J S; Padman, R

    2011-01-01

    Risk calculators are widely available Internet applications that deliver quantitative health risk estimates to consumers. Although these tools are known to have varying effects on risk perceptions, little is known about who will be more likely to accept objective risk estimates. To identify clusters of online health consumers that help explain variation in individual improvement in risk perceptions from web-based quantitative disease risk information. A secondary analysis was performed on data collected in a field experiment that measured people's pre-diabetes risk perceptions before and after visiting a realistic health promotion website that provided quantitative risk information. K-means clustering was performed on numerous candidate variable sets, and the different segmentations were evaluated based on between-cluster variation in risk perception improvement. Variation in responses to risk information was best explained by clustering on pre-intervention absolute pre-diabetes risk perceptions and an objective estimate of personal risk. Members of a high-risk overestimater cluster showed large improvements in their risk perceptions, but clusters of both moderate-risk and high-risk underestimaters were much more muted in improving their optimistically biased perceptions. Cluster analysis provided a unique approach for segmenting health consumers and predicting their acceptance of quantitative disease risk information. These clusters suggest that health consumers were very responsive to good news, but tended not to incorporate bad news into their self-perceptions much. These findings help to quantify variation among online health consumers and may inform the targeted marketing of and improvements to risk communication tools on the Internet.

  14. Track 6: safety and risk management. Plant operational risk management. Plant Configuration Risk Assessment Methodology Development for Periodic Maintenance

    International Nuclear Information System (INIS)

    Yang, Huichang; Chung, Chang Hyun; Sung, Key Yong

    2001-01-01

    As the operation experiences of nuclear power plants (NPPs) in Korea accumulate and NPP safety functions become enhanced, the role of stable and optimal NPP operation within acceptable safety criteria becomes important at present. To accomplish the goal of safe and optimal operation, maintenance and its related activities should be regarded as the issues of most concern. Studies of methodologies for maintenance improvement and optimization have focused on system performance rather than on the hardware itself. From this point of view, the probabilistic methods are most useful. In terms of risk including core damage frequency and unavailability, the cause that might impact plant safety during normal maintenance activities can be identified and evaluated effectively. The results from these probabilistic analyses can provide insightful information for the reallocation of risk-contributing maintenance activity. This information can be utilized in a way that separates the significant risk-contributing maintenance activities from each other unless they are timely related. In Korea, the risk-monitoring program for operating NPPs is under development and will be implemented in 2003. To accomplish the risk-monitoring program objectives, suitable risk evaluation methods should be developed before the implementation of the risk-monitoring program. The plant configuration assessment methodology was developed for these reasons, and this method is to incorporate the field experiences into the risk calculation exactly within the limit of probabilistic methods. During normal plant operation, the plant operational risk changes frequently depending on the status of the plant system and the arrangement of the components. Specific plant systems or components are typically removed from service because of random equipment failure, planned preventive/predictive maintenance, corrective maintenance, surveillance testing, and operational bypass activities, and such events usually impact the

  15. Improving FMEA risk assessment through reprioritization of failures

    Science.gov (United States)

    Ungureanu, A. L.; Stan, G.

    2016-08-01

    Most of the current methods used to assess the failure and to identify the industrial equipment defects are based on the determination of Risk Priority Number (RPN). Although conventional RPN calculation is easy to understand and use, the methodology presents some limitations, such as the large number of duplicates and the difficulty of assessing the RPN indices. In order to eliminate the afore-mentioned shortcomings, this paper puts forward an easy and efficient computing method, called Failure Developing Mode and Criticality Analysis (FDMCA), which takes into account the failures and the defect evolution in time, from failure appearance to a breakdown.

  16. Preliminary risk assessments of the small HTGR

    International Nuclear Information System (INIS)

    Everline, C.J.; Bellis, E.A.

    1985-05-01

    Preliminary investment and safety risk assessments were performed for a preconceptual design of a four-module 250-MW(t) side-by-side steel-vessel pebble bed HTGR plant. Broad event spectra were analyzed involving component damage resulting in unscheduled plant outages and fission product releases resulting in offsite doses. The preliminary assessment indicates at this stage of the design that two categories of events govern the investment risk envelope: primary coolant leaks which release some circulating and plate-out activity that contaminates the confinement and turbogenerator damage which involves extensive turbine blade failure. Primary coolant leaks are important contributors because associated cleanup and decontamination requirements result in longer outages that arise from other events with comparable frequencies. Turbogenerator damage is the salient low-frequency investment risk accident due to the relatively long outages being experienced in the industry. Thermal transients are unimportant investment risk contributors because pressurized core heatups cause little damage, and depressurized core heatups occur at negligible frequencies relative to the forced outage goal. These preliminary results demonstrate investment and safety risk goal compliance at this stage in the design process. Studies are continuing in order to provide valuable insights into risk-significant events to assure a balanced approach to meeting user and regulatory requirements

  17. Bayesian Networks for enterprise risk assessment

    Science.gov (United States)

    Bonafede, C. E.; Giudici, P.

    2007-08-01

    According to different typologies of activity and priority, risks can assume diverse meanings and it can be assessed in different ways. Risk, in general, is measured in terms of a probability combination of an event (frequency) and its consequence (impact). To estimate the frequency and the impact (severity) historical data or expert opinions (either qualitative or quantitative data) are used. Moreover, qualitative data must be converted in numerical values or bounds to be used in the model. In the case of enterprise risk assessment the considered risks are, for instance, strategic, operational, legal and of image, which many times are difficult to be quantified. So in most cases only expert data, gathered by scorecard approaches, are available for risk analysis. The Bayesian Networks (BNs) are a useful tool to integrate different information and in particular to study the risk's joint distribution by using data collected from experts. In this paper we want to show a possible approach for building a BN in the particular case in which only prior probabilities of node states and marginal correlations between nodes are available, and when the variables have only two states.

  18. Dermal absorption and toxicological risk assessment

    NARCIS (Netherlands)

    Buist, H.

    2016-01-01

    Absorption of toxic substances via the skin is an important phenomenon in the assessment of the risk of exposure to these substances. People are exposed to a variety of substances and products via the skin, either directly or indirectly, while at work, at home or in public space. Pesticides,

  19. An approach to security risk assessment.

    Science.gov (United States)

    Engells, Thomas E

    2012-01-01

    Use of a brief survey instrument described in this article can be a useful means of obtaining actionable information in regards to risk assessment and crime prevention, the author points out. The survey yields data that assists in the prioritization of effort that can enhance the impact of a limited pool of qualified specialists.

  20. Next generation of microbiological risk assessment

    NARCIS (Netherlands)

    Besten, den Heidy M.W.; Amézquita, Alejandro; Bover-Cid, Sara; Dagnas, Stéphane; Ellouze, Mariem; Guillou, Sandrine; Nychas, George; O'Mahony, Cian; Pérez-Rodriguez, Fernando; Membré, Jeanne Marie

    2017-01-01

    In food safety and public health risk evaluations, microbiological exposure assessment plays a central role as it provides an estimation of both the likelihood and the level of the microbial hazard in a specified consumer portion of food and takes microbial behaviour into account. While until now

  1. Ecological Risk Assessment in Water Resource Management ...

    African Journals Online (AJOL)

    The US EPA published guidelines for the application of ecological risk assessment (ERA) in the USA in 1998 (US EPA 1998). The process diagram derived by Murray and Claassen (1999) in an evaluation of the US EPA framework is discussed in the context of the South African National Water Act. The evaluation discusses ...

  2. Economic impact assessment in pest risk analysis

    NARCIS (Netherlands)

    Soliman, T.A.A.; Mourits, M.C.M.; Oude Lansink, A.G.J.M.; Werf, van der W.

    2010-01-01

    According to international treaties, phytosanitary measures against introduction and spread of invasive plant pests must be justified by a science-based pest risk analysis (PRA). Part of the PRA consists of an assessment of potential economic consequences. This paper evaluates the main available

  3. Overview of the probabilistic risk assessment approach

    International Nuclear Information System (INIS)

    Reed, J.W.

    1985-01-01

    The techniques of probabilistic risk assessment (PRA) are applicable to Department of Energy facilities. The background and techniques of PRA are given with special attention to seismic, wind and flooding external events. A specific application to seismic events is provided to demonstrate the method. However, the PRA framework is applicable also to wind and external flooding. 3 references, 8 figures, 1 table

  4. Risk assessment of integrated electronic health records.

    Science.gov (United States)

    Bjornsson, Bjarni Thor; Sigurdardottir, Gudlaug; Stefansson, Stefan Orri

    2010-01-01

    The paper describes the security concerns related to Electronic Health Records (EHR) both in registration of data and integration of systems. A description of the current state of EHR systems in Iceland is provided, along with the Ministry of Health's future vision and plans. New legislation provides the opportunity for increased integration of EHRs and further collaboration between institutions. Integration of systems, along with greater availability and access to EHR data, requires increased security awareness since additional risks are introduced. The paper describes the core principles of information security as it applies to EHR systems and data. The concepts of confidentiality, integrity, availability, accountability and traceability are introduced and described. The paper discusses the legal requirements and importance of performing risk assessment for EHR data. Risk assessment methodology according to the ISO/IEC 27001 information security standard is described with examples on how it is applied to EHR systems.

  5. The risk of a major nuclear accident: calculation and perception of probabilities

    International Nuclear Information System (INIS)

    Leveque, Francois

    2013-07-01

    The accident at Fukushima Daiichi, Japan, occurred on 11 March 2011. This nuclear disaster, the third on such a scale, left a lasting mark in the minds of hundreds of millions of people. Much as Three Mile Island or Chernobyl, yet another place will be permanently associated with a nuclear power plant which went out of control. Fukushima Daiichi revived the issue of the hazards of civil nuclear power, stirring up all the associated passion and emotion. The whole of this paper is devoted to the risk of a major nuclear accident. By this we mean a failure initiating core meltdown, a situation in which the fuel rods melt and mix with the metal in their cladding. Such accidents are classified as at least level 5 on the International Nuclear Event Scale. The Three Mile Island accident, which occurred in 1979 in the United States, reached this level of severity. The explosion of reactor 4 at the Chernobyl plant in Ukraine in 1986 and the recent accident in Japan were classified as class 7, the highest grade on this logarithmic scale. The main difference between the top two levels and level 5 relates to a significant or major release of radioactive material to the environment. In the event of a level-5 accident, damage is restricted to the inside of the plant, whereas, in the case of level-7 accidents, huge areas of land, above or below the surface, and/or sea may be contaminated. Before the meltdown of reactors 1, 2 and 3 at Fukushima Daiichi, eight major accidents affecting nuclear power plants had occurred worldwide. This is a high figure compared with the one calculated by the experts. Observations in the field do not appear to fit the results of the probabilistic models of nuclear accidents produced since the 1970's. Oddly enough the number of major accidents is closer to the risk as perceived by the general public. In general we tend to overestimate any risk relating to rare, fearsome accidents. What are we to make of this divergence? How are we to reconcile

  6. Common breast cancer risk alleles and risk assessment

    DEFF Research Database (Denmark)

    Näslund-Koch, C; Nordestgaard, B G; Bojesen, S E

    2017-01-01

    general population were followed in Danish health registries for up to 21 years after blood sampling. After genotyping 72 breast cancer risk loci, each with 0-2 alleles, the sum for each individual was calculated. We used the simple allele sum instead of the conventional polygenic risk score......, as it is likely more sensitive in detecting associations with risks of other endpoints than breast cancer. RESULTS: Breast cancer incidence in the 19,010 women was increased across allele sum quintiles (log-rank trend test; p=1*10(-12)), but not incidence of other cancers (p=0.41). Age- and study-adjusted hazard...... ratio for the 5(th) vs. 1(st) allele sum quintile was 1.82(95% confidence interval;1.53-2.18). Corresponding hazard ratios per allele were 1.04(1.03-1.05) and 1.05(1.02-1.08) for breast cancer incidence and mortality, similar across risk factors. In 50-year old women, the starting age for screening...

  7. An Assessment of SKB's Performance Assessment Calculations in the Interim Main Report for the Safety Assessment SR-Can

    International Nuclear Information System (INIS)

    Maul, Philip; Robinson, Peter

    2005-03-01

    SKB have published their Interim Main Report of the safety assessment SR-Can, which is intended to establish the framework for what will be submitted in 2006 in support of a licence application for construction of the spent fuel encapsulation plant. This follows on from the SR-Can Planning Document published in 2003. The purpose of the Interim Report is stated to be to demonstrate the methodology that will be used for safety assessment. The present report evaluates the information provided in the Interim SR-Can Report that is relevant to the Performance Assessment (PA) calculations that SKB intend to undertake, using independent calculations to facilitate this process. SKB consider that the primary safety function is to isolate completely the fuel within the canisters over the entire assessment period. Should a canister be damaged, the secondary safety function is to ensure that any release is retarded and dispersed sufficiently to ensure that concentrations levels in the accessible environment cannot cause unacceptable consequences. In this report PA calculations are considered to include both a high-level representation of the evolution of the system (relevant to the primary safety function), and any subsequent radionuclide transport (relevant to the secondary safety function). The main conclusions drawn are: 1. The effects of climate evolution on engineered barriers have not been analysed in detail in the Interim Report, and this limits the usefulness of the preliminary calculations that have been undertaken. 2. A key aspect of SKB's approach is the use of an integrated near-field evolution model. The information provided on this model demonstrates its capability efficiently to reproduce calculations from individual process models, but insufficient information is given at the present time to justify statements about interactions between processes. In particular it is assumed that relatively short term thermal and resaturation processes do not affect the

  8. Environmental Risk Assessment Strategy for Nanomaterials

    Directory of Open Access Journals (Sweden)

    Janeck J. Scott‐Fordsmand

    2017-10-01

    Full Text Available An Environmental Risk Assessment (ERA for nanomaterials (NMs is outlined in this paper. Contrary to other recent papers on the subject, the main data requirements, models and advancement within each of the four risk assessment domains are described, i.e., in the: (i materials, (ii release, fate and exposure, (iii hazard and (iv risk characterisation domains. The material, which is obviously the foundation for any risk assessment, should be described according to the legislatively required characterisation data. Characterisation data will also be used at various levels within the ERA, e.g., exposure modelling. The release, fate and exposure data and models cover the input for environmental distribution models in order to identify the potential (PES and relevant exposure scenarios (RES and, subsequently, the possible release routes, both with regard to which compartment(s NMs are distributed in line with the factors determining the fate within environmental compartment. The initial outcome in the risk characterisation will be a generic Predicted Environmental Concentration (PEC, but a refined PEC can be obtained by applying specific exposure models for relevant media. The hazard information covers a variety of representative, relevant and reliable organisms and/or functions, relevant for the RES and enabling a hazard characterisation. The initial outcome will be hazard characterisation in test systems allowing estimating a Predicted No-Effect concentration (PNEC, either based on uncertainty factors or on a NM adapted version of the Species Sensitivity Distributions approach. The risk characterisation will either be based on a deterministic risk ratio approach (i.e., PEC/PNEC or an overlay of probability distributions, i.e., exposure and hazard distributions, using the nano relevant models.

  9. Environmental Risk Assessment Strategy for Nanomaterials.

    Science.gov (United States)

    Scott-Fordsmand, Janeck J; Peijnenburg, Willie J G M; Semenzin, Elena; Nowack, Bernd; Hunt, Neil; Hristozov, Danail; Marcomini, Antonio; Irfan, Muhammad-Adeel; Jiménez, Araceli Sánchez; Landsiedel, Robert; Tran, Lang; Oomen, Agnes G; Bos, Peter M J; Hund-Rinke, Kerstin

    2017-10-19

    An Environmental Risk Assessment (ERA) for nanomaterials (NMs) is outlined in this paper. Contrary to other recent papers on the subject, the main data requirements, models and advancement within each of the four risk assessment domains are described, i.e., in the: (i) materials, (ii) release, fate and exposure, (iii) hazard and (iv) risk characterisation domains. The material, which is obviously the foundation for any risk assessment, should be described according to the legislatively required characterisation data. Characterisation data will also be used at various levels within the ERA, e.g., exposure modelling. The release, fate and exposure data and models cover the input for environmental distribution models in order to identify the potential (PES) and relevant exposure scenarios (RES) and, subsequently, the possible release routes, both with regard to which compartment(s) NMs are distributed in line with the factors determining the fate within environmental compartment. The initial outcome in the risk characterisation will be a generic Predicted Environmental Concentration (PEC), but a refined PEC can be obtained by applying specific exposure models for relevant media. The hazard information covers a variety of representative, relevant and reliable organisms and/or functions, relevant for the RES and enabling a hazard characterisation. The initial outcome will be hazard characterisation in test systems allowing estimating a Predicted No-Effect concentration (PNEC), either based on uncertainty factors or on a NM adapted version of the Species Sensitivity Distributions approach. The risk characterisation will either be based on a deterministic risk ratio approach (i.e., PEC/PNEC) or an overlay of probability distributions, i.e., exposure and hazard distributions, using the nano relevant models.

  10. Cancer risk assessments and environmental regulation

    International Nuclear Information System (INIS)

    Scroggin, D.G.

    1990-01-01

    Governmental regulation of toxic substances, such as carcinogens and radiation, prompts both legal and scientific controversies. Industry, environmental activist groups, government regulators, and the general public are all concerned with the question of how environmental risk to public health is to be measured and what level of risk warrants government action under the environmental laws. Several recent events shed light on the fundamental scientific and legal problems inherent in such regulation, and these events may affect the direction of future developments. These events include implementation of generic Risk Assessment Guidelines by the US EPA, litigation challenging EPA's regulation of carcinogenic substances, new scientific understanding of the relative risks from human exposure to natural and man-made sources, and the continuing growth of toxic tort litigation in which victims of cancer seek large damages from industrial emitters of pollution

  11. New approaches in human health risk assessment.

    Science.gov (United States)

    Abass, Khaled; Carlsen, Anders; Rautio, Arja

    2016-01-01

    Studies on the precise impact of environmental pollutants on human health are difficult to undertake and interpret, because many genetic and environmental factors influence health at the same time and to varying degrees. Our chapter in the AMAP report was based on new approaches to describe risks and future needs. In this paper, we will introduce the issues associated with risk assessment of single chemicals, and present suggestions for future studies as well as a summary of lessons learned during the health-related parts of the European Union-funded FP7 project ArcRisk (Arctic Health Risks: Impacts on health in the Arctic and Europe owing to climate-induced changes in contaminant cycling, 2009-2014; www.arcrisk.eu).

  12. New approaches in human health risk assessment

    Directory of Open Access Journals (Sweden)

    Khaled Abass

    2016-12-01

    Full Text Available Studies on the precise impact of environmental pollutants on human health are difficult to undertake and interpret, because many genetic and environmental factors influence health at the same time and to varying degrees. Our chapter in the AMAP report was based on new approaches to describe risks and future needs. In this paper, we will introduce the issues associated with risk assessment of single chemicals, and present suggestions for future studies as well as a summary of lessons learned during the health-related parts of the European Union-funded FP7 project ArcRisk (Arctic Health Risks: Impacts on health in the Arctic and Europe owing to climate-induced changes in contaminant cycling, 2009–2014; www.arcrisk.eu.

  13. Ecological risk assessment and carcinogen health risk assessment of arsenic in soils from part area of the Daye City, China

    Science.gov (United States)

    Li, F.; Wang, T.; Xiao, M. S.; Cai, Y.; Zhuang, Z. Y.

    2018-01-01

    Soils in four sampling sites from part area of the Daye City were collected. Concentrations of arsenic (As) in soils in sampling sites were detected by Atomic Fluorescence Spectrometry, ecological risk was calculated by potential ecological risk index (RI) and human health risk was measured by human health risk assessment model established by USEPA. The results showed that, the total content of As in soils in Daye was decreased in the order of S4 (66.58 mg/kg)>S2 (44.73 mg/kg)>S3 (34.86 mg/kg) >S1 (21.84 mg/kg), concentrations in all sampling sites were higher than background values of Hubei Province. The potential risk and human health risk were decreased in the order of S4>S2>S3>S1 and S4>S3>S2>S1, respectively. Specially, S1, S2 and S3 were at low potential ecological risk while S4 was at moderate ecological risk. But there was no carcinogenic risk for human exposure to As in soil in Daye.

  14. Model based risk assessment - the CORAS framework

    Energy Technology Data Exchange (ETDEWEB)

    Gran, Bjoern Axel; Fredriksen, Rune; Thunem, Atoosa P-J.

    2004-04-15

    Traditional risk analysis and assessment is based on failure-oriented models of the system. In contrast to this, model-based risk assessment (MBRA) utilizes success-oriented models describing all intended system aspects, including functional, operational and organizational aspects of the target. The target models are then used as input sources for complementary risk analysis and assessment techniques, as well as a basis for the documentation of the assessment results. The EU-funded CORAS project developed a tool-supported methodology for the application of MBRA in security-critical systems. The methodology has been tested with successful outcome through a series of seven trial within the telemedicine and ecommerce areas. The CORAS project in general and the CORAS application of MBRA in particular have contributed positively to the visibility of model-based risk assessment and thus to the disclosure of several potentials for further exploitation of various aspects within this important research field. In that connection, the CORAS methodology's possibilities for further improvement towards utilization in more complex architectures and also in other application domains such as the nuclear field can be addressed. The latter calls for adapting the framework to address nuclear standards such as IEC 60880 and IEC 61513. For this development we recommend applying a trial driven approach within the nuclear field. The tool supported approach for combining risk analysis and system development also fits well with the HRP proposal for developing an Integrated Design Environment (IDE) providing efficient methods and tools to support control room systems design. (Author)

  15. Risk assessment in man and mouse.

    Science.gov (United States)

    Balci, Fuat; Freestone, David; Gallistel, Charles R

    2009-02-17

    Human and mouse subjects tried to anticipate at which of 2 locations a reward would appear. On a randomly scheduled fraction of the trials, it appeared with a short latency at one location; on the complementary fraction, it appeared after a longer latency at the other location. Subjects of both species accurately assessed the exogenous uncertainty (the probability of a short versus a long trial) and the endogenous uncertainty (from the scalar variability in their estimates of an elapsed duration) to compute the optimal target latency for a switch from the short- to the long-latency location. The optimal latency was arrived at so rapidly that there was no reliably discernible improvement over trials. Under these nonverbal conditions, humans and mice accurately assess risks and behave nearly optimally. That this capacity is well-developed in the mouse opens up the possibility of a genetic approach to the neurobiological mechanisms underlying risk assessment.

  16. Quantitative risk assessment of digitalized safety systems

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Sung Min; Lee, Sang Hun; Kang, Hym Gook [KAIST, Daejeon (Korea, Republic of); Lee, Seung Jun [UNIST, Ulasn (Korea, Republic of)

    2016-05-15

    A report published by the U.S. National Research Council indicates that appropriate methods for assessing reliability are key to establishing the acceptability of digital instrumentation and control (I and C) systems in safety-critical plants such as NPPs. Since the release of this issue, the methodology for the probabilistic safety assessment (PSA) of digital I and C systems has been studied. However, there is still no widely accepted method. Kang and Sung found three critical factors for safety assessment of digital systems: detection coverage of fault-tolerant techniques, software reliability quantification, and network communication risk. In reality the various factors composing digitalized I and C systems are not independent of each other but rather closely connected. Thus, from a macro point of view, a method that can integrate risk factors with different characteristics needs to be considered together with the micro approaches to address the challenges facing each factor.

  17. Seismic Risk Assessment for the Kyrgyz Republic

    Science.gov (United States)

    Pittore, Massimiliano; Sousa, Luis; Grant, Damian; Fleming, Kevin; Parolai, Stefano; Fourniadis, Yannis; Free, Matthew; Moldobekov, Bolot; Takeuchi, Ko

    2017-04-01

    The Kyrgyz Republic is one of the most socially and economically dynamic countries in Central Asia, and one of the most endangered by earthquake hazard in the region. In order to support the government of the Kyrgyz Republic in the development of a country-level Disaster Risk Reduction strategy, a comprehensive seismic risk study has been developed with the support of the World Bank. As part of this project, state-of-the-art hazard, exposure and vulnerability models have been developed and combined into the assessment of direct physical and economic risk on residential, educational and transportation infrastructure. The seismic hazard has been modelled with three different approaches, in order to provide a comprehensive overview of the possible consequences. A probabilistic seismic hazard assessment (PSHA) approach has been used to quantitatively evaluate the distribution of expected ground shaking intensity, as constrained by the compiled earthquake catalogue and associated seismic source model. A set of specific seismic scenarios based on events generated from known fault systems have been also considered, in order to provide insight on the expected consequences in case of strong events in proximity of densely inhabited areas. Furthermore, long-span catalogues of events have been generated stochastically and employed in the probabilistic analysis of expected losses over the territory of the Kyrgyz Republic. Damage and risk estimates have been computed by using an exposure model recently developed for the country, combined with the assignment of suitable fragility/vulnerability models. The risk estimation has been carried out with spatial aggregation at the district (rayon) level. The obtained results confirm the high level of seismic risk throughout the country, also pinpointing the location of several risk hotspots, particularly in the southern districts, in correspondence with the Ferghana valley. The outcome of this project will further support the local

  18. Expert judgement models in quantitative risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rosqvist, T. [VTT Automation, Helsinki (Finland); Tuominen, R. [VTT Automation, Tampere (Finland)

    1999-12-01

    Expert judgement is a valuable source of information in risk management. Especially, risk-based decision making relies significantly on quantitative risk assessment, which requires numerical data describing the initiator event frequencies and conditional probabilities in the risk model. This data is seldom found in databases and has to be elicited from qualified experts. In this report, we discuss some modelling approaches to expert judgement in risk modelling. A classical and a Bayesian expert model is presented and applied to real case expert judgement data. The cornerstone in the models is the log-normal distribution, which is argued to be a satisfactory choice for modelling degree-of-belief type probability distributions with respect to the unknown parameters in a risk model. Expert judgements are qualified according to bias, dispersion, and dependency, which are treated differently in the classical and Bayesian approaches. The differences are pointed out and related to the application task. Differences in the results obtained from the different approaches, as applied to real case expert judgement data, are discussed. Also, the role of a degree-of-belief type probability in risk decision making is discussed.

  19. Expert judgement models in quantitative risk assessment

    International Nuclear Information System (INIS)

    Rosqvist, T.; Tuominen, R.

    1999-01-01

    Expert judgement is a valuable source of information in risk management. Especially, risk-based decision making relies significantly on quantitative risk assessment, which requires numerical data describing the initiator event frequencies and conditional probabilities in the risk model. This data is seldom found in databases and has to be elicited from qualified experts. In this report, we discuss some modelling approaches to expert judgement in risk modelling. A classical and a Bayesian expert model is presented and applied to real case expert judgement data. The cornerstone in the models is the log-normal distribution, which is argued to be a satisfactory choice for modelling degree-of-belief type probability distributions with respect to the unknown parameters in a risk model. Expert judgements are qualified according to bias, dispersion, and dependency, which are treated differently in the classical and Bayesian approaches. The differences are pointed out and related to the application task. Differences in the results obtained from the different approaches, as applied to real case expert judgement data, are discussed. Also, the role of a degree-of-belief type probability in risk decision making is discussed

  20. Advanced Seismic Probabilistic Risk Assessment Demonstration Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, Justin [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    Idaho National Laboratories (INL) has an ongoing research and development (R&D) project to remove excess conservatism from seismic probabilistic risk assessments (SPRA) calculations. These risk calculations should focus on providing best estimate results, and associated insights, for evaluation and decision-making. This report presents a plan for improving our current traditional SPRA process using a seismic event recorded at a nuclear power plant site, with known outcomes, to improve the decision making process. SPRAs are intended to provide best estimates of the various combinations of structural and equipment failures that can lead to a seismic induced core damage event. However, in general this approach has been conservative, and potentially masks other important events (for instance, it was not the seismic motions that caused the Fukushima core melt events, but the tsunami ingress into the facility).

  1. Assessment of genetic risk for human exposure to radiation

    International Nuclear Information System (INIS)

    Sevcenko, V.A.; Rubanovic, A.V.

    2002-01-01

    Full text: The methodology of assessing the genetic risk of radiation exposure is based on the concept of 'hitting the target' in development of which N.V. Timofeeff-Ressovsky has played and important role. To predict genetic risk posed by irradiation, the U N Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) has worked out direct and indirect methods of assessment, extrapolation, integral and palpitation criteria of risk analysis that together permit calculating the risk from human exposure on the basis of data obtained for mice. Based on the reports of UNSCEAR for the period from 1958 to 2001 the paper presents a retrospective analysis of the use of direct methods and the doubling dose method for quantitative determination of the genetic risk of human exposure expressed as different hereditary diseases. As early as 1962 UNSCEAR estimated the doubling dose (a dose causing as many mutations as those occurring spontaneously during one generation) at 1 Gy for cases of exposure to ionizing radiations with low LET at a low dose rate and this value was confirmed in the next UNSCEAR reports up to now. For cases of acute irradiation the doubling dose was estimated at 0,3-0,4 Gy for the period under review. The paper considers the evolution of the concepts of human natural hereditary variability which is a basis for assessing the risk of exposure by the doubling dose method. The level of human natural genetic variability per 1 000 000 newborns is estimated at 738 000 hereditary diseases including mendelian, chromosomal and multifactorial ones. The greatest difficulties in assessing the doubling dose value were found to occur in the case of multifactorial diseases the pheno typical expression of which depends on mutational events in polygenic systems and on numerous environmental factors. The introduction in calculations of the potential recoverability correction factor (RPCF) made it possible to assess the genetic risk taking into account this class of

  2. Safety analysis and risk assessment handbook

    International Nuclear Information System (INIS)

    Peterson, V.L.; Colwell, R.G.; Dickey, R.L.

    1997-01-01

    This Safety Analysis and Risk Assessment Handbook (SARAH) provides guidance to the safety analyst at the Rocky Flats Environmental Technology Site (RFETS) in the preparation of safety analyses and risk assessments. Although the older guidance (the Rocky Flats Risk Assessment Guide) continues to be used for updating the Final Safety Analysis Reports developed in the mid-1980s, this new guidance is used with all new authorization basis documents. With the mission change at RFETS came the need to establish new authorization basis documents for its facilities, whose functions had changed. The methodology and databases for performing the evaluations that support the new authorization basis documents had to be standardized, to avoid the use of different approaches and/or databases for similar accidents in different facilities. This handbook presents this new standardized approach. The handbook begins with a discussion of the requirements of the different types of authorization basis documents and how to choose the one appropriate for the facility to be evaluated. It then walks the analyst through the process of identifying all the potential hazards in the facility, classifying them, and choosing the ones that need to be analyzed further. It then discusses the methods for evaluating accident initiation and progression and covers the basic steps in a safety analysis, including consequence and frequency binning and risk ranking. The handbook lays out standardized approaches for determining the source terms of the various accidents (including airborne release fractions, leakpath factors, etc.), the atmospheric dispersion factors appropriate for Rocky Flats, and the methods for radiological and chemical consequence assessments. The radiological assessments use a radiological open-quotes templateclose quotes, a spreadsheet that incorporates the standard values of parameters, whereas the chemical assessments use the standard codes ARCHIE and ALOHA

  3. An abuse of risk assessment: how regulatory agencies improperly adopted LNT for cancer risk assessment.

    Science.gov (United States)

    Calabrese, Edward J

    2015-04-01

    The Genetics Panel of the National Academy of Sciences' Committee on Biological Effects of Atomic Radiation (BEAR) recommended the adoption of the linear dose-response model in 1956, abandoning the threshold dose-response for genetic risk assessments. This recommendation was quickly generalized to include somatic cells for cancer risk assessment and later was instrumental in the adoption of linearity for carcinogen risk assessment by the Environmental Protection Agency. The Genetics Panel failed to provide any scientific assessment to support this recommendation and refused to do so when later challenged by other leading scientists. Thus, the linearity model used in cancer risk assessment was based on ideology rather than science and originated with the recommendation of the NAS BEAR Committee Genetics Panel. Historical documentation in support of these conclusions is provided in the transcripts of the Panel meetings and in previously unexamined correspondence among Panel members.

  4. Slope excavation quality assessment and excavated volume calculation in hydraulic projects based on laser scanning technology

    Directory of Open Access Journals (Sweden)

    Chao Hu

    2015-04-01

    Full Text Available Slope excavation is one of the most crucial steps in the construction of a hydraulic project. Excavation project quality assessment and excavated volume calculation are critical in construction management. The positioning of excavation projects using traditional instruments is inefficient and may cause error. To improve the efficiency and precision of calculation and assessment, three-dimensional laser scanning technology was used for slope excavation quality assessment. An efficient data acquisition, processing, and management workflow was presented in this study. Based on the quality control indices, including the average gradient, slope toe elevation, and overbreak and underbreak, cross-sectional quality assessment and holistic quality assessment methods were proposed to assess the slope excavation quality with laser-scanned data. An algorithm was also presented to calculate the excavated volume with laser-scanned data. A field application and a laboratory experiment were carried out to verify the feasibility of these methods for excavation quality assessment and excavated volume calculation. The results show that the quality assessment indices can be obtained rapidly and accurately with design parameters and scanned data, and the results of holistic quality assessment are consistent with those of cross-sectional quality assessment. In addition, the time consumption in excavation quality assessment with the laser scanning technology can be reduced by 70%–90%, as compared with the traditional method. The excavated volume calculated with the scanned data only slightly differs from measured data, demonstrating the applicability of the excavated volume calculation method presented in this study.

  5. Radiological risk assessment of Capstone depleted uranium aerosols.

    Science.gov (United States)

    Hahn, Fletcher F; Roszell, Laurie E; Daxon, Eric G; Guilmette, Raymond A; Parkhurst, Mary Ann

    2009-03-01

    Assessment of the health risk from exposure to aerosols of depleted uranium (DU) is an important outcome of the Capstone aerosol studies that established exposure ranges to personnel in armored combat vehicles perforated by DU munitions. Although the radiation exposure from DU is low, there is concern that DU deposited in the body may increase cancer rates. Radiation doses to various organs of the body resulting from the inhalation of DU aerosols measured in the Capstone studies were calculated using International Commission on Radiological Protection (ICRP) models. Organs and tissues with the highest calculated committed equivalent 50-y doses were lung and extrathoracic tissues (nose and nasal passages, pharynx, larynx, mouth, and thoracic lymph nodes). Doses to the bone surface and kidney were about 5 to 10% of the doses to the extrathoracic tissues. Organ-specific risks were estimated using ICRP and U.S. Environmental Protection Agency (EPA) methodologies. Risks for crewmembers and first responders were determined for selected scenarios based on the time interval of exposure and for vehicle and armor type. The lung was the organ with the highest cancer mortality risk, accounting for about 97% of the risks summed from all organs. The highest mean lifetime risk for lung cancer for the scenario with the longest exposure time interval (2 h) was 0.42%. This risk is low compared with the natural or background risk of 7.35%. These risks can be significantly reduced by using an existing ventilation system (if operable) and by reducing personnel time in the vehicle immediately after perforation.

  6. Microbiological risk assessment and public health

    International Nuclear Information System (INIS)

    Roger Skinner

    1992-01-01

    Despite the advances made in risk assessment i the past twenty years, in areas as diverse as toxicology and offshore engineering, the risk assessment approach has made little impact on those addressing the microbiological aspects of public health. In this paper the advances which have been made are discussed and the difficulties preventing the wider application of microbiological risk assessment (MRA) to public health are considered. The term microbiological risk is used here to mean the probability of contracting a disease caused by a microorganism. I intend to demonstrate that the dynamic nature of microorganisms and the unique nature of the relationship between a pathogen (a microorganism which causes disease) and its host create special challenges for those involved in MRA. Although these problems are difficult they are not intractable. Indeed in some cases partial solutions have already been found and applied. It is hoped that this paper will help stimulate further thought and consideration in a variety of disciplines so that these challenges can be met, thereby allowing MRA to fulfil its potential

  7. Microbiological risk assessment and public health

    Energy Technology Data Exchange (ETDEWEB)

    Skinner, Roger

    1992-07-01

    Despite the advances made in risk assessment i the past twenty years, in areas as diverse as toxicology and offshore engineering, the risk assessment approach has made little impact on those addressing the microbiological aspects of public health. In this paper the advances which have been made are discussed and the difficulties preventing the wider application of microbiological risk assessment (MRA) to public health are considered. The term microbiological risk is used here to mean the probability of contracting a disease caused by a microorganism. I intend to demonstrate that the dynamic nature of microorganisms and the unique nature of the relationship between a pathogen (a microorganism which causes disease) and its host create special challenges for those involved in MRA. Although these problems are difficult they are not intractable. Indeed in some cases partial solutions have already been found and applied. It is hoped that this paper will help stimulate further thought and consideration in a variety of disciplines so that these challenges can be met, thereby allowing MRA to fulfil its potential.

  8. A microbial identification framework for risk assessment.

    Science.gov (United States)

    Bernatchez, Stéphane; Anoop, Valar; Saikali, Zeina; Breton, Marie

    2018-06-01

    Micro-organisms are increasingly used in a variety of products for commercial uses, including cleaning products. Such microbial-based cleaning products (MBCP) are represented as a more environmentally-friendly alternative to chemically based cleaning products. The identity of the micro-organisms formulated into these products is often considered confidential business information and is not revealed or it is only partly revealed (i.e., identification to the genus, not to the species). That paucity of information complicates the evaluation of the risk associated with their use. The accurate taxonomic identification of those micro-organisms is important so that a suitable risk assessment of the products can be conducted. To alleviate difficulties associated with adequate identification of micro-organisms in MBCP and other products containing micro-organisms, a microbial identification framework for risk assessment (MIFRA) has been elaborated. It serves to provide guidance on a polyphasic tiered approach, combining the data obtained from the use of various methods (i.e., polyphasic approach) combined with the sequential selection of the methods (i.e., tiered) to achieve a satisfactory identity of the micro-organism to an acceptable taxonomic level. The MIFRA is suitable in various risk assessment contexts for micro-organisms used in any commercial product. Copyright © 2018. Published by Elsevier Ltd.

  9. A method for calculating effective lifetime risk of radiation-induced cancer from screening mammography

    International Nuclear Information System (INIS)

    Ali, R.M.; England, A.; McEntee, M.F.; Hogg, P.

    2015-01-01

    Purpose: To propose a method for evaluating the effective lifetime risk of radiation-induced cancer from screening mammography and to present initial data for the UK National Breast Screening Programme. Material and methods: The imaging was undertaken using a Hologic Selenia full field digital mammographic unit. The proposed method utilises an ATOM phantom containing thermoluminescent dosimeters and a perspex-polyethylene breast phantom to measure organ doses during a standard four view screening mammogram. Effective dose was calculated and effective risk was modelled for a range of client ages. The total lifetime effective risk was then calculated for the UK national screening programme. Calculation of effective risk includes the radiation dose to examined and contralateral breasts in addition to other body organs; this is an advantage over the mean glandular dose. Results: The contralateral breast, thyroid, thymus, brain, lung, salivary glands, and bone marrow all receive more than 1 μGy radiation dose during screening mammography. A major difference exists for total effective lifetime risk of radiation-induced cancer between clients with average and high breast cancer risk. Differences are attributed to the commencement age of screening and time interval between screens. Conclusion: This study proposes a method to evaluate effective lifetime risk of radiation-induced cancer from screening mammography in order to compare different mammography screening programmes. - Highlights: • We proposed a method for the calculation of radiation-induced cancer from screening mammography. • We measured the radiation absorbed dose of different organs during screening mammography. • There are major differences between mammography screening programme categories with regard to radiation effective risk.

  10. Quantitative risk assessment of drinking water contaminants

    International Nuclear Information System (INIS)

    Cothern, C.R.; Coniglio, W.A.; Marcus, W.L.

    1986-01-01

    The development of criteria and standards for the regulation of drinking water contaminants involves a variety of processes, one of which is risk estimation. This estimation process, called quantitative risk assessment, involves combining data on the occurrence of the contaminant in drinking water and its toxicity. The human exposure to a contaminant can be estimated from occurrence data. Usually the toxicity or number of health effects per concentration level is estimated from animal bioassay studies using the multistage model. For comparison, other models will be used including the Weibull, probit, logit and quadratic ones. Because exposure and toxicity data are generally incomplete, assumptions need to be made and this generally results in a wide range of certainty in the estimates. This range can be as wide as four to six orders of magnitude in the case of the volatile organic compounds in drinking water and a factor of four to five for estimation of risk due to radionuclides in drinking water. As examples of the differences encountered in risk assessment of drinking water contaminants, discussions are presented on benzene, lead, radon and alachlor. The lifetime population risk estimates for these contaminants are, respectively, in the ranges of: <1 - 3000, <1 - 8000, 2000-40,000 and <1 - 80. 11 references, 1 figure, 1 table

  11. Clinical risk assessment in intensive care unit

    Directory of Open Access Journals (Sweden)

    Saeed Asefzadeh

    2013-01-01

    Full Text Available Background: Clinical risk management focuses on improving the quality and safety of health care services by identifying the circumstances and opportunities that put patients at risk of harm and acting to prevent or control those risks. The goal of this study is to identify and assess the failure modes in the ICU of Qazvin′s Social Security Hospital (Razi Hospital through Failure Mode and Effect Analysis (FMEA. Methods: This was a qualitative-quantitative research by Focus Discussion Group (FDG performed in Qazvin Province, Iran during 2011. The study population included all individuals and owners who are familiar with the process in ICU. Sampling method was purposeful and the FDG group members were selected by the researcher. The research instrument was standard worksheet that has been used by several researchers. Data was analyzed by FMEA technique. Results: Forty eight clinical errors and failure modes identified, results showed that the highest risk probability number (RPN was in respiratory care "Ventilator′s alarm malfunction (no alarm" with the score 288, and the lowest was in gastrointestinal "not washing the NG-Tube" with the score 8. Conclusions: Many of the identified errors can be prevented by group members. Clinical risk assessment and management is the key to delivery of effective health care.

  12. Recent developments in carcinogenic risk assessment

    International Nuclear Information System (INIS)

    Krewski, D.; Murdoch, D.; Withey, J.R.

    1989-01-01

    In this paper, recent developments in the quantitative assessment of carcinogenic risks based on toxicological and epidemiological data are reviewed. In particular, model-free approaches to low-dose risk assessment which involve only the assumption of low-dose linearity are considered. Measures of carcinogenic potency which avoid the need to extrapolate to low doses are also described. The allometric bases for converting risk estimates between species are then discussed. Pharmacokinetic models for determining the dose delivered to the target tissue are examined, and the implications of using such models in extrapolating between doses, of exposure, and species are examined. The application of these concepts in chemical and radiation carcinogenesis is illustrated by means of brief case studies of methylene chloride and Rn. Biologically motivated cancer models based on the initiation-promotion-progression theory of carcinogenesis are discussed and compared with the classical multistage model. The estimation of risks with time-dependent exposure patterns is considered, and conditions under which the use of a time-weighted average dose is appropriate are identified. Finally, the estimation of carcinogenic risks posed by exposure to complex mixtures is explored. 92 references

  13. 2009 Space Shuttle Probabilistic Risk Assessment Overview

    Science.gov (United States)

    Hamlin, Teri L.; Canga, Michael A.; Boyer, Roger L.; Thigpen, Eric B.

    2010-01-01

    Loss of a Space Shuttle during flight has severe consequences, including loss of a significant national asset; loss of national confidence and pride; and, most importantly, loss of human life. The Shuttle Probabilistic Risk Assessment (SPRA) is used to identify risk contributors and their significance; thus, assisting management in determining how to reduce risk. In 2006, an overview of the SPRA Iteration 2.1 was presented at PSAM 8 [1]. Like all successful PRAs, the SPRA is a living PRA and has undergone revisions since PSAM 8. The latest revision to the SPRA is Iteration 3. 1, and it will not be the last as the Shuttle program progresses and more is learned. This paper discusses the SPRA scope, overall methodology, and results, as well as provides risk insights. The scope, assumptions, uncertainties, and limitations of this assessment provide risk-informed perspective to aid management s decision-making process. In addition, this paper compares the Iteration 3.1 analysis and results to the Iteration 2.1 analysis and results presented at PSAM 8.

  14. Screening Level Risk Assessment for the New Waste Calcining Facility

    Energy Technology Data Exchange (ETDEWEB)

    M. L. Abbott; K. N. Keck; R. E. Schindler; R. L. VanHorn; N. L. Hampton; M. B. Heiser

    1999-05-01

    This screening level risk assessment evaluates potential adverse human health and ecological impacts resulting from continued operations of the calciner at the New Waste Calcining Facility (NWCF) at the Idaho Nuclear Technology and Engineering Center (INTEC), Idaho National Engineering and Environmental Laboratory (INEEL). The assessment was conducted in accordance with the Environmental Protection Agency (EPA) report, Guidance for Performing Screening Level Risk Analyses at Combustion Facilities Burning Hazardous Waste. This screening guidance is intended to give a conservative estimate of the potential risks to determine whether a more refined assessment is warranted. The NWCF uses a fluidized-bed combustor to solidify (calcine) liquid radioactive mixed waste from the INTEC Tank Farm facility. Calciner off volatilized metal species, trace organic compounds, and low-levels of radionuclides. Conservative stack emission rates were calculated based on maximum waste solution feed samples, conservative assumptions for off gas partitioning of metals and organics, stack gas sampling for mercury, and conservative measurements of contaminant removal (decontamination factors) in the off gas treatment system. Stack emissions were modeled using the ISC3 air dispersion model to predict maximum particulate and vapor air concentrations and ground deposition rates. Results demonstrate that NWCF emissions calculated from best-available process knowledge would result in maximum onsite and offsite health and ecological impacts that are less then EPA-established criteria for operation of a combustion facility.

  15. In prospect: role of safety assessment and risk regulation

    International Nuclear Information System (INIS)

    Novegno, A.; Askulaj, Eh.

    1987-01-01

    Problems of accident prevention in industry and power engineering are considered for the sake of environment and human health protection. Investigations into comparison of power system risks are conducted; based on the data obtained a possibility to control the risk has appeared. The IAEA provides an active assistance in realization of a program of coordinated investigations on the risk assessment using the cost-benefit method. For each NPP investigation into all types of its effect on the environment (risk for personnel and population under normal radioactivity releases and in case of accidents), is conducted. Two approaches to calculating the impacts of accidents at NPPs-'determination' one, based on the designed accident and safety probability evaluation exist. Regional approach appears to be the best one when solving the problems of risk control. Attention is paid to a joint project of the IAEA-UNO and WHO related to risk assessment and control for human health and environment protection at power and other complex commercial systems

  16. Risk assessments for the disposal of high level radioactive wastes

    International Nuclear Information System (INIS)

    Smith, C.F.

    1975-01-01

    The risks associated with the disposal of high level wastes derive from the potential for release of radioactive materials into the environment. The assessment of these risks requires a methodology for risk analysis, an identification of the radioactive sources, and a method by which to express the relative hazard of the various radionuclides that comprise the high level waste. The development of a methodology for risk analysis is carried out after a review of previous work in the area of probabilistic risk assessment. The methodology suggested involves the probabilistic analysis of a general accident consequence distribution. In this analysis, the frequency aspect of the distribution is treated separately from the normalized probability function. At the final stage of the analysis, the frequency and probability characteristics of the distribution are recombined to provide an estimate of the risk. The characterization of the radioactive source term is accomplished using the ORIGEN computer code. Calculations are carried out for various reactor types and fuel cycles, and the overall waste hazard for a projected thirty-five year nuclear power program is determined

  17. Microbial aerosol generation during laboratory accidents and subsequent risk assessment.

    Science.gov (United States)

    Bennett, A; Parks, S

    2006-04-01

    To quantify microbial aerosols generated by a series of laboratory accidents and to use these data in risk assessment. A series of laboratory accident scenarios have been devised and the microbial aerosol generated by them has been measured using a range of microbial air samplers. The accident scenarios generating the highest aerosol concentrations were, dropping a fungal plate, dropping a large bottle, centrifuge rotor leaks and a blocked syringe filter. Many of these accidents generated low particle size aerosols, which would be inhaled into the lungs of any exposed laboratory staff. Spray factors (SFs) have been calculated using the results of these experiments as an indicator of the potential for accidents to generate microbial aerosols. Model risk assessments have been described using the SF data. Quantitative risk assessment of laboratory accidents can provide data that can aid the design of containment laboratories and the response to laboratory accidents. A methodology has been described and supporting data provided to allow microbiological safety officers to carry out quantitative risk assessment of laboratory accidents.

  18. Assessing the Environmental Risks of Nanomaterials

    DEFF Research Database (Denmark)

    Grieger, Khara Deanne; Hansen, Steffen Foss; Baun, Anders

    to a wide range of technical limitations. For instance, serious knowledge gaps remain within e.g. the detection of NM in the environment, developing adequate testing equipment and protocols, and toxicity endpoints (Grieger et al., 2009). In the past few years, many scientists and organizations have...... considered. Furthermore, we recommend the use of biomonitoring in some environmental ‘hot spots’ to serve as early warning detectors while the field of NM environmental risk assessment matures, as recommended in our previous work. Ultimately, this analysis may aid the advancement of environmental risk...

  19. A risk assessment of the SAFR plant

    International Nuclear Information System (INIS)

    Rutherford, P.D.; Mills, J.C.; Lancet, R.T.; Nourjah, P.

    1987-01-01

    The Sodium Advanced Fast Reactor (SAFR) is a modular, advanced concept, Liquid Metal Reactor (LMR), funded by the U.S., and designed by Rockwell International, Bechtel Corporation, and Combustion Engineering. SAFR utilizes the inherently safe features of small fast reactors, including natural convection decay heat removal systems, a self-actuated shutdown system (SASS) and inherent core response to design basis events without scram including transient overpower (TOP), loss of flow (LOF), and loss of heat sink (LOHS) events. A Level 3 probabilistic risk assessment (PRA) has been performed which demonstrates considerable reduction in plant and public risk compared to current commercial reactors. (orig./HSCH)

  20. Correlation between Cholesterol, Triglycerides, Calculated, and Measured Lipoproteins: Whether Calculated Small Density Lipoprotein Fraction Predicts Cardiovascular Risks

    Directory of Open Access Journals (Sweden)

    Sikandar Hayat Khan

    2017-01-01

    Full Text Available Background. Recent literature in lipidology has identified LDL-fractions to be more atherogenic. In this regard, small density LDL-cholesterol (sdLDLc has been considered to possess more atherogenicity than other LDL-fractions like large buoyant LDL-cholesterol (lbLDLc. Recently, Srisawasdi et al. have developed a method for calculating sdLDLc and lbLDLc based upon a regression equation. Using that in developing world may provide us with a valuable tool for ASCVD risk prediction. Objective. (1 To correlate directly measured and calculated lipid indices with insulin resistance, UACR, glycated hemoglobin, anthropometric indices, and blood pressure. (2 To evaluate these lipid parameters in subjects with or without metabolic syndrome, nephropathy, and hypertension and among various groups based upon glycated hemoglobin results. Design. Cross-sectional study. Place and Duration of Study. From Jan 2016 to 15 April 2017. Subjects and Methods. Finally enrolled subjects (male: 110, female: 122 were evaluated for differences in various lipid parameters, including measured LDL-cholesterol (mLDLc, HDLc and calculated LDL-cholesterol (cLDLc, non-HDLc, sdLDLC, lbLDLC, and their ratio among subjects with or without metabolic syndrome, nephropathy, glycation index, anthropometric indices, and hypertension. Results. Significant but weak correlation was mainly observed between anthropometric indices, insulin resistance, blood pressure, and nephropathy for non-HDLc, sdLDLc, and sdLDLc/lbLDLc. Generally lipid indices were higher among subjects with metabolic syndrome [{sdLDLc: 0.92 + 0.33 versus 0.70 + 0.29 (p 7.0%. Subjects having nephropathy (UACR > 2.4 mg/g had higher concentration of non-HDLc levels in comparison to sdLDLc [{non-HDLc: 3.68 + 0.59 versus 3.36 + 0.43} (p=0.007, {sdLDLc: 0.83 + 0.27 versus 0.75 + 0.35 (p=NS}]. Conclusion. Lipid markers including cLDLc and mLDLc are less associated with traditional ASCVD markers than non-HDLc, sdLDLc, and sd